WorldWideScience

Sample records for rapid molecular methods

  1. A simple and rapid molecular method for Leptospira species identification

    NARCIS (Netherlands)

    Ahmed, Ahmed; Anthony, Richard M.; Hartskeerl, Rudy A.

    2010-01-01

    Serological and DNA-based classification systems only have little correlation. Currently serological and molecular methods for characterizing Leptospira are complex and costly restricting their world-wide distribution and use. Ligation mediated amplification combined with microarray analysis

  2. A low complexity rapid molecular method for detection of Clostridium difficile in stool.

    Directory of Open Access Journals (Sweden)

    Cathal J McElgunn

    Full Text Available Here we describe a method for the detection of Clostridium difficile from stool using a novel low-complexity and rapid extraction process called Heat Elution (HE. The HE method is two-step and takes just 10 minutes, no specialist instruments are required and there is minimal hands-on time. A test method using HE was developed in conjunction with Loop-mediated Isothermal Amplification (LAMP combined with the real-time bioluminescent reporter system known as BART targeting the toxin B gene (tcdB. The HE-LAMP-BART method was evaluated in a pilot study on clinical fecal samples (tcdB(+, n = 111; tcdB(-, n= 107. The HE-LAMP-BART method showed 95.5% sensitivity and 100% specificity against a gold standard reference method using cytotoxigenic culture and also a silica-based robotic extraction followed by tcdB PCR to control for storage. From sample to result, the HE-LAMP-BART method typically took 50 minutes, whereas the PCR method took >2.5 hours. In a further study (tcdB(+, n = 47; tcdB(-, n= 28 HE-LAMP-BART was compared to an alternative commercially available LAMP-based method, Illumigene (Meridian Bioscience, OH, and yielded 87.2% sensitivity and 100% specificity for the HE-LAMP-BART method compared to 76.6% and 100%, respectively, for Illumigene against the reference method. A subset of 27 samples (tcdB(+, n = 25; tcdB(-, n= 2 were further compared between HE-LAMP-BART, Illumigene, GeneXpert (Cepheid, Sunnyvale, CA and RIDA®QUICK C. difficile Toxin A/B lateral flow rapid test (R-Biopharm, Darmstadt, Germany resulting in sensitivities of HE-LAMP-BART 92%, Illumigene 72% GeneXpert 96% and RIDAQuick 76% against the reference method. The HE-LAMP-BART method offers the advantages of molecular based approaches without the cost and complexity usually associated with molecular tests. Further, the rapid time-to-result and simple protocol means the method can be applied away from the centralized laboratory settings.

  3. Comparison of various molecular methods for rapid differentiation of intestinal bifidobacteria at the species, subspecies and strain level.

    Science.gov (United States)

    Jarocki, Piotr; Podleśny, Marcin; Komoń-Janczara, Elwira; Kucharska, Jagoda; Glibowska, Agnieszka; Targoński, Zdzisław

    2016-07-22

    Members of the genus Bifidobacterium are anaerobic Gram-positive Actinobacteria, which are natural inhabitants of human and animal gastrointestinal tract. Certain bifidobacteria are frequently used as food additives and probiotic pharmaceuticals, because of their various health-promoting properties. Due to the enormous demand on probiotic bacteria, manufacture of high-quality products containing living microorganisms requires rapid and accurate identification of specific bacteria. Additionally, isolation of new industrial bacteria from various environments may lead to multiple isolations of the same strain, therefore, it is important to apply rapid, low-cost and effective procedures differentiating bifidobacteria at the intra-species level. The identification of new isolates using microbiological and biochemical methods is difficult, but the accurate characterization of isolated strains may be achieved using a polyphasic approach that includes classical phenotypic methods and molecular procedures. However, some of these procedures are time-consuming and cumbersome, particularly when a large group of new isolates is typed, while some other approaches may have too low discriminatory power to distinguish closely related isolates obtained from similar sources. This work presents the evaluation of the discriminatory power of four molecular methods (ARDRA, RAPD-PCR, rep-PCR and SDS-PAGE fingerprinting) that are extensively used for fast differentiation of bifidobacteria up to the strain level. Our experiments included 17 reference strains and showed that in comparison to ARDRA, genotypic fingerprinting procedures (RAPD and rep-PCR) seemed to be less reproducible, however, they allowed to differentiate the tested microorganisms even at the intra-species level. In general, RAPD and rep-PCR have similar discriminatory power, though, in some instances more than one oligonucleotide needs to be used in random amplified polymorphic DNA analysis. Moreover, the results also

  4. Optimization of Molecularly Imprinted Polymer Method for Rapid Screening of 17β-Estradiol in Water by Fluorescence Quenching

    Directory of Open Access Journals (Sweden)

    Yu Yang

    2011-01-01

    Full Text Available A new method was optimized for rapid screening of 17β-estradiol (E2 in water under 10 min. Molecularly imprinted polymer (MIP particles (325 ± 25 nm were added in a water sample at pH 5.5 and 20∘C to form a suspension. Fluorescence emission from E2 nonspecifically bound onto the MIP particles was first quenched by large gold nanoparticles (43 ± 5 nm. The Stern-Volmer plot was linear, with dynamic quenching constants (Ksv of 2.9 ×104 M-1. Fluorescence emission from E2 specifically bound inside the MIP particles was next quenched by small nitrite anions that easily penetrated the imprinted cavities. The Stern-Volmer plot became nonlinear, with Ksv = 2.1 × 102 M-1 and static quenching constant (V below 1.0 M-1. The difference between these two emission intensities varied as the initial E2 concentration in water, generating a Scatchard calibration curve with R2>0.97 from 0.1 to 10 ppb.

  5. Use of Molecular Methods for the Rapid Mass Detection of Schistosoma mansoni (Platyhelminthes: Trematoda) in Biomphalaria spp. (Gastropoda: Planorbidae).

    Science.gov (United States)

    Caldeira, Roberta Lima; Jannotti-Passos, Liana Konovaloffi; Dos Santos Carvalho, Omar

    2017-01-01

    The low stringency-polymerase chain reaction (LS-PCR) and loop-mediated isothermal amplification (LAMP) assays were used to detect the presence of S. mansoni DNA in (1) Brazilian intermediate hosts (Biomphalaria glabrata, B. straminea, and B. tenagophila) with patent S. mansoni infections, (2) B. glabrata snails with prepatent S. mansoni infections, (3) various mixtures of infected and noninfected snails; and (4) snails infected with other trematode species. The assays showed high sensitivity and specificity and could detect S. mansoni DNA when one positive snail was included in a pool of 1,000 negative specimens of Biomphalaria. These molecular approaches can provide a low-cost, effective, and rapid method for detecting the presence of S. mansoni in pooled samples of field-collected Biomphalaria. These assays should aid mapping of transmission sites in endemic areas, especially in low prevalence regions and improve schistosomiasis surveillance. It will be a useful tool to monitor low infection rates of snails in areas where control interventions are leading towards the elimination of schistosomiasis.

  6. A rapid molecular method for differentiating two special forms (lycopersici and radicis-lycopersici) of Fusarium oxysporum.

    Science.gov (United States)

    Attitalla, Idress H; Fatehi, Jamshid; Levenfors, Jens; Brishammar, Sture

    2004-07-01

    Two pathogenic special forms (f. sp.) of the Fusarium oxysporum species complex f. sp. lycopersici (Fol) and f. sp. radicis-lycopersici (Forl) are morphologically indistinguishable. Although they are pathogenic to the same host genus Lycopersicon (tomato), and infect the same tomato cultivar, they form distinct diseases; Fol causes wilt and Forl causes crown rot and root rot. These two special forms apparently exist as genetically isolated populations, based on vegetative compatibility and molecular variation at the DNA level. In seeking efficient diagnostic tools for differentiating Fol and Forl isolates, we examined three techniques: isozyme analysis, mitochondrial DNA (mtDNA) RFLP by HaeIII-digestion of total genomic DNA, and an osmotic method using high performance liquid chromatography (HPLC) to detect fungal pigments. The isolates were collected from geographically widespread locations. Distinct HPLC-profile differences were found between an endophytic non-pathogenic isolate and the other pathogenic isolates. However, the direct mtDNA RFLP technique proved to be an efficient diagnostic tool for routine differentiation of Fol and Forl isolates.

  7. On the Development of a Very Rapid Gas Chromatographic Method for the Analysis of High Molecular Weight Hydrocarbons in Cigarette Smoke

    Directory of Open Access Journals (Sweden)

    Coleman III WM

    2014-12-01

    Full Text Available A very rapid, flash-gas chromatographic (GC, quantitative method for the analysis of high molecular weight saturated hydrocarbons in cigarette smoke has been developed. The method was fast, accurate and precise. Sample turn around times were approximately six minutes, with an accompanying average percent relative standard deviation (%RSD of less than 10%. Four linear saturated hydrocarbons with 27, 29, 31 and 33 carbon atoms were quantitated in an array of reference cigarettes ranging in “tar” deliveries from approximately 2 to approximately 20 mg. By use of a cyclohexane extraction of cigarette smoke captured on Cambridge filter pads, the extraction efficiency was determined to be greater than 95% for each hydrocarbon. The approach represents a significant advance over current analytical procedures that require, on average, greater than 30-min sample turn around times.

  8. A rapid molecular approach for chromosomal phasing.

    Directory of Open Access Journals (Sweden)

    John F Regan

    Full Text Available Determining the chromosomal phase of pairs of sequence variants - the arrangement of specific alleles as haplotypes - is a routine challenge in molecular genetics. Here we describe Drop-Phase, a molecular method for quickly ascertaining the phase of pairs of DNA sequence variants (separated by 1-200 kb without cloning or manual single-molecule dilution. In each Drop-Phase reaction, genomic DNA segments are isolated in tens of thousands of nanoliter-sized droplets together with allele-specific fluorescence probes, in a single reaction well. Physically linked alleles partition into the same droplets, revealing their chromosomal phase in the co-distribution of fluorophores across droplets. We demonstrated the accuracy of this method by phasing members of trios (revealing 100% concordance with inheritance information, and demonstrate a common clinical application by phasing CFTR alleles at genomic distances of 11-116 kb in the genomes of cystic fibrosis patients. Drop-Phase is rapid (requiring less than 4 hours, scalable (to hundreds of samples, and effective at long genomic distances (200 kb.

  9. Rapid and accurate assessment of GPCR-ligand interactions Using the fragment molecular orbital-based density-functional tight-binding method.

    Science.gov (United States)

    Morao, Inaki; Fedorov, Dmitri G; Robinson, Roger; Southey, Michelle; Townsend-Nicholson, Andrea; Bodkin, Mike J; Heifetz, Alexander

    2017-09-05

    The reliable and precise evaluation of receptor-ligand interactions and pair-interaction energy is an essential element of rational drug design. While quantum mechanical (QM) methods have been a promising means by which to achieve this, traditional QM is not applicable for large biological systems due to its high computational cost. Here, the fragment molecular orbital (FMO) method has been used to accelerate QM calculations, and by combining FMO with the density-functional tight-binding (DFTB) method we are able to decrease computational cost 1000 times, achieving results in seconds, instead of hours. We have applied FMO-DFTB to three different GPCR-ligand systems. Our results correlate well with site directed mutagenesis data and findings presented in the published literature, demonstrating that FMO-DFTB is a rapid and accurate means of GPCR-ligand interactions. © 2017 Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc. © 2017 Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.

  10. Rapid molecular technique to distinguish Fusarium species

    CSIR Research Space (South Africa)

    Lodolo, EJ

    1993-03-01

    Full Text Available The nuclear DNA (nDNA) of different isolates of three closely related, toxin-producing Fusarium species, F. moniliforme, F. nygamai and F. napiforme, was compared to ascertain the sensitivity of a molecular method to distinguish these three species...

  11. Molecular methods for biofilms

    KAUST Repository

    Ferrera, Isabel

    2014-08-30

    This chapter deals with both classical and modern molecular methods that can be useful for the identification of microorganisms, elucidation and comparison of microbial communities, and investigation of their diversity and functions. The most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples; these are discussed in the first part. The second part provides an overview over DNA polymerase chain reaction (PCR) amplification and DNA sequencing methods. Protocols and analysis software as well as potential pitfalls associated with application of these methods are discussed. Community fingerprinting analyses that can be used to compare multiple microbial communities are discussed in the third part. This part focuses on Denaturing Gradient Gel Electrophoresis (DGGE), Terminal Restriction Fragment Length Polymorphism (T-RFLP) and Automated rRNA Intergenic Spacer Analysis (ARISA) methods. In addition, classical and next-generation metagenomics methods are presented. These are limited to bacterial artificial chromosome and Fosmid libraries and Sanger and next-generation 454 sequencing, as these methods are currently the most frequently used in research. Isolation of nucleic acids: This chapter discusses, the most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples. Nucleic acid isolation methods generally include three steps: cell lysis, removal of unwanted substances, and a final step of DNA purification and recovery. The first critical step is the cell lysis, which can be achieved by enzymatic or mechanical procedures. Removal of proteins, polysaccharides and other unwanted substances is likewise important to avoid their interference in subsequent analyses. Phenol-chloroform-isoamyl alcohol is commonly used to recover DNA, since it separates nucleic acids into an aqueous phase and precipitates proteins and

  12. Rapid methods for detection of bacteria

    DEFF Research Database (Denmark)

    Corfitzen, Charlotte B.; Andersen, B.Ø.; Miller, M.

    2006-01-01

    Traditional methods for detection of bacteria in drinking water e.g. Heterotrophic Plate Counts (HPC) or Most Probable Number (MNP) take 48-72 hours to give the result. New rapid methods for detection of bacteria are needed to protect the consumers against contaminations. Two rapid methods...

  13. Innovative rapid construction/reconstruction methods.

    Science.gov (United States)

    2005-07-01

    Innovative construction and reconstruction methods provide the opportunity to significantly reduce the time of roadway projects while maintaining the necessary quality of workmanship. The need for these rapid methods stems from the increase in ...

  14. Computational methods for molecular imaging

    CERN Document Server

    Shi, Kuangyu; Li, Shuo

    2015-01-01

    This volume contains original submissions on the development and application of molecular imaging computing. The editors invited authors to submit high-quality contributions on a wide range of topics including, but not limited to: • Image Synthesis & Reconstruction of Emission Tomography (PET, SPECT) and other Molecular Imaging Modalities • Molecular Imaging Enhancement • Data Analysis of Clinical & Pre-clinical Molecular Imaging • Multi-Modal Image Processing (PET/CT, PET/MR, SPECT/CT, etc.) • Machine Learning and Data Mining in Molecular Imaging. Molecular imaging is an evolving clinical and research discipline enabling the visualization, characterization and quantification of biological processes taking place at the cellular and subcellular levels within intact living subjects. Computational methods play an important role in the development of molecular imaging, from image synthesis to data analysis and from clinical diagnosis to therapy individualization. This work will bring readers fro...

  15. A new method for rapid Canine retraction

    Directory of Open Access Journals (Sweden)

    "Khavari A

    2001-06-01

    Full Text Available Distraction osteogenesis method (Do in bone lengthening and rapid midpalatal expansion have shown the great ability of osteognic tissues for rapid bone formation under distraction force and special protocol with optimum rate of one millimeter per day. Periodontal membrane of teeth (PDM is the extension of periostium in the alveolar socked. Orthodontic force distracts PDM fibers in the tension side and then bone formation will begin.Objects: Rapid retraction of canine tooth into extraction space of first premolar by DO protocol in order to show the ability of the PDM in rapid bone formation. The other objective was reducing total orthodontic treatment time of extraction cases.Patients and Methods: Tweleve maxillary canines in six patients were retracted rapidly in three weeks by a custom-made tooth-born appliance. Radiographic records were taken to evaluate the effects of heavy applied force on canine and anchorage teeth.Results: Average retraction was 7.05 mm in three weeks (2.35 mm/week. Canines rotated distal- in by mean 3.5 degrees.Anchorage loss was from 0 to 0.8 mm with average of 0.3 mm.Root resorption of canines was negligible, and was not significant clinically. Periodontium was normal after rapid retraction. No hazard for pulp vitality was observed.Discussion: PDM responded well to heavy distraction force by Do protocol. Rapid canine retraction seems to be a safe method and can considerabely reduce orthodontic time.

  16. A scoping review of rapid review methods.

    Science.gov (United States)

    Tricco, Andrea C; Antony, Jesmin; Zarin, Wasifa; Strifler, Lisa; Ghassemi, Marco; Ivory, John; Perrier, Laure; Hutton, Brian; Moher, David; Straus, Sharon E

    2015-09-16

    Rapid reviews are a form of knowledge synthesis in which components of the systematic review process are simplified or omitted to produce information in a timely manner. Although numerous centers are conducting rapid reviews internationally, few studies have examined the methodological characteristics of rapid reviews. We aimed to examine articles, books, and reports that evaluated, compared, used or described rapid reviews or methods through a scoping review. MEDLINE, EMBASE, the Cochrane Library, internet websites of rapid review producers, and reference lists were searched to identify articles for inclusion. Two reviewers independently screened literature search results and abstracted data from included studies. Descriptive analysis was conducted. We included 100 articles plus one companion report that were published between 1997 and 2013. The studies were categorized as 84 application papers, seven development papers, six impact papers, and four comparison papers (one was included in two categories). The rapid reviews were conducted between 1 and 12 months, predominantly in Europe (58 %) and North America (20 %). The included studies failed to report 6 % to 73 % of the specific systematic review steps examined. Fifty unique rapid review methods were identified; 16 methods occurred more than once. Streamlined methods that were used in the 82 rapid reviews included limiting the literature search to published literature (24 %) or one database (2 %), limiting inclusion criteria by date (68 %) or language (49 %), having one person screen and another verify or screen excluded studies (6 %), having one person abstract data and another verify (23 %), not conducting risk of bias/quality appraisal (7 %) or having only one reviewer conduct the quality appraisal (7 %), and presenting results as a narrative summary (78 %). Four case studies were identified that compared the results of rapid reviews to systematic reviews. Three studies found that the conclusions between

  17. Rapid molecular identification of human taeniid cestodes by pyrosequencing approach.

    Directory of Open Access Journals (Sweden)

    Tongjit Thanchomnang

    Full Text Available Taenia saginata, T. solium, and T. asiatica are causative agents of taeniasis in humans. The difficulty of morphological identification of human taeniids can lead to misdiagnosis or confusion. To overcome this problem, several molecular methods have been developed, but use of these tends to be time-consuming. Here, a rapid and high-throughput pyrosequencing approach was developed for the identification of three human taeniids originating from various countries. Primers targeting the mitochondrial cytochrome c oxidase subunit 1 (cox1 gene of the three Taenia species were designed. Variations in a 26-nucleotide target region were used for identification. The reproducibility and accuracy of the pyrosequencing technology was confirmed by Sanger sequencing. This technique will be a valuable tool to distinguish between sympatric human taeniids that occur in Thailand, Asia and Pacific countries. This method could potentially be used for the molecular identification of the taeniid species that might be associated with suspicious cysts and lesions, or cyst residues in humans or livestock at the slaughterhouse.

  18. Rapid Molecular Identification of Human Taeniid Cestodes by Pyrosequencing Approach

    Science.gov (United States)

    Thanchomnang, Tongjit; Tantrawatpan, Chairat; Intapan, Pewpan M.; Sanpool, Oranuch; Janwan, Penchom; Lulitanond, Viraphong; Tourtip, Somjintana; Yamasaki, Hiroshi; Maleewong, Wanchai

    2014-01-01

    Taenia saginata, T. solium, and T. asiatica are causative agents of taeniasis in humans. The difficulty of morphological identification of human taeniids can lead to misdiagnosis or confusion. To overcome this problem, several molecular methods have been developed, but use of these tends to be time-consuming. Here, a rapid and high-throughput pyrosequencing approach was developed for the identification of three human taeniids originating from various countries. Primers targeting the mitochondrial cytochrome c oxidase subunit 1 (cox1) gene of the three Taenia species were designed. Variations in a 26-nucleotide target region were used for identification. The reproducibility and accuracy of the pyrosequencing technology was confirmed by Sanger sequencing. This technique will be a valuable tool to distinguish between sympatric human taeniids that occur in Thailand, Asia and Pacific countries. This method could potentially be used for the molecular identification of the taeniid species that might be associated with suspicious cysts and lesions, or cyst residues in humans or livestock at the slaughterhouse. PMID:24945530

  19. A rapid screening LC-MS/MS method based on conventional HPLC pumps for the analysis of low molecular weight xenobiotics: application to doping control analysis.

    Science.gov (United States)

    Mazzarino, Monica; de la Torre, Xavier; Botrè, Francesco; Gray, Nicola; Cowan, David

    2010-07-01

    This study presents a fast multi-analyte screening method specifically developed for the detection of xenobiotics in urine. The proposed method allows the screening of several classes of substance in a single chromatographic method with a run-time of 11 min, inclusive of post-run and reconditioning times. Chromatographic separation is achieved in 7.2 min using a reversed-phase 2.7 µm fused-core particle column, generating a back-pressure not exceeding 400 bar and therefore enabling the use of traditional high performance liquid chromatography (HPLC) instruments. The effectiveness of this approach was evaluated, by liquid-chromatography tandem mass spectrometry (LC-MS/MS) in positive electrospray ionization, using 20 blank urine samples spiked with 45 compounds prohibited in sport: 11 diuretics, 16 glucocorticoids, 9 stimulants, 5 anti-oestrogens, as well as formoterol, carboxy-finasteride (previously prohibited by the World Anti-Doping Agency (WADA) in 2008), gestrinone and tetrahydrogestrinone. Qualitative validation shows the proposed method to be specific with no significant interference. All of the analytes considered in this study were clearly distinguishable in urine, with limits of detection ranging from 5 ng/mL to 350 ng/mL, significantly below the Minimum Required Performance Levels (MRPL) set by WADA for the accredited sports anti-doping laboratories. All compounds of interest were separated, including synthetic and endogenous glucocorticoids with similar retention times and fragmentation patterns. Copyright 2010 John Wiley & Sons, Ltd.

  20. Rapid, Simple and Cost-Effective Molecular Method to Differentiate the Temperature Sensitive (ts+) MS-H Vaccine Strain and Wild-Type Mycoplasma synoviae Isolates

    Science.gov (United States)

    Kreizinger, Zsuzsa; Sulyok, Kinga Mária; Pásztor, Alexandra; Erdélyi, Károly; Felde, Orsolya; Povazsán, János; Kőrösi, László; Gyuranecz, Miklós

    2015-01-01

    Mycoplasma synoviae infection in chickens and turkeys can cause respiratory disease, infectious synovitis and eggshell apex abnormality; thus it is an economically important pathogen. Control of M. synoviae infection comprises eradication, medication or vaccination. The differentiation of the temperature sensitive (ts+) MS-H vaccine strain from field isolates is crucial during vaccination programs. Melt-curve and agarose gel based mismatch amplification mutation assays (MAMA) are provided in the present study to distinguish between the ts+ MS-H vaccine strain, its non-temperature sensitive re-isolates and wild-type M. synoviae isolates based on the single nucleotide polymorphisms at nt367 and nt629 of the obg gene. The two melt-MAMAs and the two agarose-MAMAs clearly distinguish the ts+ MS-H vaccine strain genotype from its non-temperature sensitive re-isolate genotype and wild-type M. synoviae isolate genotype, and no cross-reactions with other Mycoplasma species infecting birds occur. The sensitivity of the melt-MAMAs and agarose-MAMAs was 103 and 104 copy numbers, respectively. The assays can be performed directly on clinical samples and they can be run simultaneously at the same annealing temperature. The assays can be performed in laboratories with limited facilities, using basic real-time PCR machine or conventional thermocycler coupled with agarose gel electrophoresis. The advantages of the described assays compared with previously used methods are simplicity, sufficient sensitivity, time and cost effectiveness and specificity. PMID:26207635

  1. Molecular Identification of Helicoverpa armigera (Lepidoptera: Noctuidae: Heliothinae) in Argentina and Development of a Novel PCR-RFLP Method for its Rapid Differentiation From H. zea and H. gelotopoeon.

    Science.gov (United States)

    Arneodo, Joel D; Balbi, Emilia I; Flores, Fernando M; Sciocco-Cap, Alicia

    2015-12-01

    Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae: Heliothinae) is among the most voracious global pests of agriculture. Adults of this species were identified recently in northern Argentina by dissection of male genitalia. In this work, a rapid and simple molecular tool was designed to distinguish H. armigera from the morphologically similar indigenous bollworms Helicoverpa zea (Boddie) and Helicoverpa gelotopoeon (Dyar), regardless of the life stage. Amplification of partial COI gene with a new primer pair, and subsequent digestion with endonuclease HinfI, yielded different RFLP profiles for the three main Helicoverpa pests currently present in South America. The method was validated in Helicoverpa specimens collected across Argentina, whose identity was further corroborated by COI sequencing and phylogenetic analysis. The data reported here constitute the first molecular confirmation of this pest in the country. The survey revealed the occurrence of H. armigera in northern and central Argentina, including the main soybean- and maize-producing area. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  2. Rapid determination of capsaicinoids by colorimetric method

    OpenAIRE

    Ryu, Wang-Kyun; Kim, Hee-Woong; Kim, Geun-Dong; Rhee, Hae-Ik

    2016-01-01

    Capsaicinoids, the pungent component of chili peppers, are generally analyzed by precise analytical techniques, such as gas chromatography and high-performance liquid chromatography (HPLC), but these are not practical for the mass analyses of samples. To analyze mass samples rapidly, a colorimetric method was suggested. In this work, pigments and capsaicinoids were efficiently separated from chili pepper extract by sequential solid–liquid extraction and liquid–liquid extraction in test tubes ...

  3. Rapid methods for detection of bacterial resistance to antibiotics.

    Science.gov (United States)

    March-Rosselló, Gabriel Alberto

    2017-03-01

    The most widely used antibiotic susceptibility testing methods in Clinical Microbiology are based on the phenotypic detection of antibiotic resistance by measuring bacterial growth in the presence of the antibiotic being tested. These conventional methods take typically 24hours to obtain results. Here we review the main techniques for rapid determination of antibiotic susceptibility. Data obtained with different methods such as molecular techniques, microarrays, commercial methods used in work routine, immunochromatographic methods, colorimetric methods, image methods, nephelometry, MALDI-TOF mass spectrometry, flow cytometry, chemiluminescence and bioluminescence, microfluids and methods based on cell disruption are analysed in detail. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  4. Rapid Column Extraction method for SoilRapid Column Extraction method for Soil

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod, L. III; Culligan, Brian K.

    2005-11-07

    The analysis of actinides in environmental soil and sediment samples is very important for environmental monitoring as well as for emergency preparedness. A new, rapid actinide separation method has been developed and implemented that provides total dissolution of large soil samples, high chemical recoveries and effective removal of matrix interferences. This method uses stacked TEVA Resin{reg_sign}, TRU Resin{reg_sign} and DGA-Resin{reg_sign} cartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium (Pu) neptunium (Np), uranium (U), americium (Am), and curium (Cm) using a single multi-stage column combined with alpha spectrometry. The method combines a rapid fusion step for total dissolution to dissolve refractory analytes and matrix removal using cerium fluoride precipitation to remove the difficult soil matrix. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized.

  5. Variational methods in molecular modeling

    CERN Document Server

    2017-01-01

    This book presents tutorial overviews for many applications of variational methods to molecular modeling. Topics discussed include the Gibbs-Bogoliubov-Feynman variational principle, square-gradient models, classical density functional theories, self-consistent-field theories, phase-field methods, Ginzburg-Landau and Helfrich-type phenomenological models, dynamical density functional theory, and variational Monte Carlo methods. Illustrative examples are given to facilitate understanding of the basic concepts and quantitative prediction of the properties and rich behavior of diverse many-body systems ranging from inhomogeneous fluids, electrolytes and ionic liquids in micropores, colloidal dispersions, liquid crystals, polymer blends, lipid membranes, microemulsions, magnetic materials and high-temperature superconductors. All chapters are written by leading experts in the field and illustrated with tutorial examples for their practical applications to specific subjects. With emphasis placed on physical unders...

  6. SCAR makers and multiplex PCR-based rapid molecular typing of Lentinula edodes strains.

    Science.gov (United States)

    Wu, Xueqian; Li, Haibo; Zhao, Weiwei; Fu, Lizhong; Peng, Huazheng; He, Liang; Cheng, Junwen; Wei, Hailong; Wu, Qingqi

    2010-11-01

    Lentinula edodes is the second most important cultivated mushroom worldwide, the most commercial strains have been identified only through traditional phenotypic analysis. In this study, a simple rapid PCR-based molecular method was developed for distinguishing commercial strains of L. edodes by developing specific sequence characterized amplified region (SCAR) markers and establishing multiplex PCR assays with the SCAR primers. Derived from the randomly amplified polymorphic DNA (RAPD) and sequence-related amplified polymorphism (SRAP) techniques, 10 informative SCAR markers were generated from 10 polymorphic RAPD and SRAP bands. The differences in SCAR phenotypes among different strains made these SCAR markers potentially useful to characterize 6 strains and identify them from other studied strains. Moreover, different SCAR phenotypes also made the other 17 studied strains to be divided into four distinguishable groups. The multiplex PCR assays were further established for the joint use of some SCAR markers efficiently. Compared with some identification methods reported previously, the special feature of this new molecular method is technically rapid and convenient in the practical use and suitable for analyzing large numbers of samples. Thus, the simple rapid PCR-based molecular method can be used as a helpful assistant tool for the lentinula industry. To our knowledge, this study is the first to describe a development of a new SCAR maker-based multiplex PCR assay for rapid molecular typing of edible mushroom.

  7. Rapid determination of capsaicinoids by colorimetric method.

    Science.gov (United States)

    Ryu, Wang-Kyun; Kim, Hee-Woong; Kim, Geun-Dong; Rhee, Hae-Ik

    2017-10-01

    Capsaicinoids, the pungent component of chili peppers, are generally analyzed by precise analytical techniques, such as gas chromatography and high-performance liquid chromatography (HPLC), but these are not practical for the mass analyses of samples. To analyze mass samples rapidly, a colorimetric method was suggested. In this work, pigments and capsaicinoids were efficiently separated from chili pepper extract by sequential solid-liquid extraction and liquid-liquid extraction in test tubes followed by a colorimetric analysis on the capsaicinoids by a selective chromogenic reaction with Gibbs reagent (2,6-dichloroquinone-4-chloroimide). In the comparison of the capsaicinoid content by the colorimetric method and HPLC using acetone extracts of fresh pepper and dry red pepper as samples, R2 was 0.9973 and 0.9816, respectively, which shows a high linear correlation. In addition, a minimum of 1 μg/mL capsaicinoids can be detected and it was therefore determined that the method can efficiently analyze a great quantity of samples in a short time. Copyright © 2016. Published by Elsevier B.V.

  8. Rapid determination of capsaicinoids by colorimetric method

    Directory of Open Access Journals (Sweden)

    Wang-Kyun Ryu

    2017-10-01

    Full Text Available Capsaicinoids, the pungent component of chili peppers, are generally analyzed by precise analytical techniques, such as gas chromatography and high-performance liquid chromatography (HPLC, but these are not practical for the mass analyses of samples. To analyze mass samples rapidly, a colorimetric method was suggested. In this work, pigments and capsaicinoids were efficiently separated from chili pepper extract by sequential solid–liquid extraction and liquid–liquid extraction in test tubes followed by a colorimetric analysis on the capsaicinoids by a selective chromogenic reaction with Gibbs reagent (2,6-dichloroquinone-4-chloroimide. In the comparison of the capsaicinoid content by the colorimetric method and HPLC using acetone extracts of fresh pepper and dry red pepper as samples, R2 was 0.9973 and 0.9816, respectively, which shows a high linear correlation. In addition, a minimum of 1 μg/mL capsaicinoids can be detected and it was therefore determined that the method can efficiently analyze a great quantity of samples in a short time.

  9. Comparisons Of Molecular Methods In The Diagnosis Of Pathogenic Fungi

    Directory of Open Access Journals (Sweden)

    Mouhanad AL ALI

    2015-08-01

    Full Text Available Abstract Pathogenic fungi are responsible for high infectious morbidity and mortality in immunodeficient patients a rapid and accurate identification of pathogenic fungi is critical for appropriate treatment. Recently many molecular methods have been developed for diagnosis to improve the identification of pathogenic fungi. In this review we compared the advantage and disadvantage of five molecular methods that are widely used in the diagnosis of pathogenic fungi.

  10. Using current molecular techniques for rapid differentiation of ...

    African Journals Online (AJOL)

    Typhoid fever is responsible for the deaths of many people annually. However, conventional and timeconsuming detection methods for Salmonella Typhi still dominate. By using a molecular based approach, it was possible to identify Salmonella Typhi by amplifying two specific genes (viaB and tyv) and by using RFLP ...

  11. SIMS: a hybrid method for rapid conformational analysis.

    Directory of Open Access Journals (Sweden)

    Bryant Gipson

    Full Text Available Proteins are at the root of many biological functions, often performing complex tasks as the result of large changes in their structure. Describing the exact details of these conformational changes, however, remains a central challenge for computational biology due the enormous computational requirements of the problem. This has engendered the development of a rich variety of useful methods designed to answer specific questions at different levels of spatial, temporal, and energetic resolution. These methods fall largely into two classes: physically accurate, but computationally demanding methods and fast, approximate methods. We introduce here a new hybrid modeling tool, the Structured Intuitive Move Selector (sims, designed to bridge the divide between these two classes, while allowing the benefits of both to be seamlessly integrated into a single framework. This is achieved by applying a modern motion planning algorithm, borrowed from the field of robotics, in tandem with a well-established protein modeling library. sims can combine precise energy calculations with approximate or specialized conformational sampling routines to produce rapid, yet accurate, analysis of the large-scale conformational variability of protein systems. Several key advancements are shown, including the abstract use of generically defined moves (conformational sampling methods and an expansive probabilistic conformational exploration. We present three example problems that sims is applied to and demonstrate a rapid solution for each. These include the automatic determination of "active" residues for the hinge-based system Cyanovirin-N, exploring conformational changes involving long-range coordinated motion between non-sequential residues in Ribose-Binding Protein, and the rapid discovery of a transient conformational state of Maltose-Binding Protein, previously only determined by Molecular Dynamics. For all cases we provide energetic validations using well

  12. Rapid method for detection of salmonella in meat

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention relates to a rapid method for the detection of Salmonella in meat as well as to a kit for performing said method. The method provides a time-to-result of less than 8 hours.......The present invention relates to a rapid method for the detection of Salmonella in meat as well as to a kit for performing said method. The method provides a time-to-result of less than 8 hours....

  13. Methods and compositions for rapid thermal cycling

    Science.gov (United States)

    Beer, Neil Reginald; Benett, William J.; Frank, James M.; Deotte, Joshua R.; Spadaccini, Christopher

    2015-10-27

    The rapid thermal cycling of a material is targeted. A microfluidic heat exchanger with an internal porous medium is coupled to tanks containing cold fluid and hot fluid. Fluid flows alternately from the cold tank and the hot tank into the porous medium, cooling and heating samples contained in the microfluidic heat exchanger's sample wells. A valve may be coupled to the tanks and a pump, and switching the position of the valve may switch the source and direction of fluid flowing through the porous medium. A controller may control the switching of valve positions based on the temperature of the samples and determined temperature thresholds. A sample tray for containing samples to be thermally cycled may be used in conjunction with the thermal cycling system. A surface or internal electrical heater may aid in heating the samples, or may replace the necessity for the hot tank.

  14. Rapid Molecular detection of citrus brown spot disease using ACT gene in Alternaria alternata

    Directory of Open Access Journals (Sweden)

    Hamid Moghimi

    2017-06-01

    Full Text Available Introduction:Using rapid detection methods is important for detection of plant pathogens and also prevention through spreading pests in agriculture. Citrus brown spot disease caused by pathogenic isolates of Alternaria alternata is a common disease in Iran. Materials and methods: In this study, for the first time a PCR based molecular method was used for rapid diagnosis of brown spot disease. Nine isolates of A. Alternata were isolated in PDA medium from different citrus gardens. The plant pathogenic activity was examined in tangerine leaves for isolates. Results showed that these isolates are the agents of brown spot disease. PCR amplification of specific ACT-toxin gene was performed for DNA extracted from A. alternata isolates, with 11 different fungal isolates as negative controls and 5 DNA samples extracted from soil. Results: Results showed that A. alternata, the causal agent of brown spot disease, can be carefully distinguished from other pathogenic agents by performing PCR amplification with specific primers for ACT toxin gene. Also, the results from Nested-PCR method confirmed the primary reaction and the specificity of A. alternata for brown spot disease. PCR results to control samples of the other standard fungal isolates, showed no amplification band. In addition, PCR with the DNA extracted from contaminated soils confirmed the presence of ACT toxin gene. Discussion and conclusion: Molecular procedure presented here can be used in rapid identification and prevention of brown spot infection in citrus gardens all over the country.

  15. [Physical methods and molecular biology].

    Science.gov (United States)

    Serdiuk, I N

    2009-01-01

    The review is devoted to the description of the current state of physical and chemical methods used for studying the structural and functional bases of living processes. Special attention is focused on the physical methods that have opened a new page in the research of the structure of biological macromolecules. They include primarily the methods of detecting and manipulating single molecules using optical and magnetic traps. New physical methods, such as two-dimensional infrared spectroscopy, fluorescence correlation spectroscopy and magnetic resonance microscopy are also analyzed briefly in the review. The path that physics and biology have passed for the latest 55 years shows that there is no single method providing all necessary information on macromolecules and their interactions. Each method provides its space-time view of the system. All physical methods are complementary. It is just complementarity that is the fundamental idea justifying the existence in practice of all physical methods, whose description is the aim of the review.

  16. Novel trace norm regularization method for fluorescence molecular tomography reconstruction

    Science.gov (United States)

    Liu, Yuhao; Liu, Jie; An, Yu; Jiang, Shixin; Ye, Jinzuo; Mao, Yamin; He, Kunshan; Zhang, Guanglei; Chi, Chongwei; Tian, Jie

    2017-02-01

    Fluorescence molecular tomography (FMT) is developing rapidly in the field of molecular imaging. FMT has been used in surgical navigation for tumor resection and has many potential applications at the physiological, metabolic, and molecular levels in tissues. Due to the ill-posed nature of the problem, many regularized methods are generally adopted. In this paper, we propose a region reconstruction method for FMT in which the trace norm regularization. The trace norm penalty was defined as the sum of the singular values of the matrix. The proposed method adopts a priori information which is the structured sparsity of the fluorescent regions for FMT reconstruction. In order to improve the solution efficiency, the accelerated proximal gradient algorithms was used to accelerate the computation. The numerical phantom experiment was conducted to evaluate the performance of the proposed trace norm regularization method. The simulation study shows that the proposed method achieves accurate and is able to reconstruct image effectively.

  17. Acanthamoeba keratitis: improving the Scottish diagnostic service for the rapid molecular detection of Acanthamoeba species.

    Science.gov (United States)

    Alexander, Claire Low; Coyne, Michael; Jones, Brian; Anijeet, Deepa

    2015-07-01

    Acanthamoeba species are responsible for causing the potentially sight-threatening condition, Acanthamoeba keratitis, which is commonly associated with contact lens use. In this report, we highlight the challenges faced using conventional laboratory identification methods to identify this often under-reported pathogen, and discuss the reasons for introducing the first national service in Scotland for the rapid and sensitive molecular identification of Acanthamoeba species. By comparing culture and molecular testing data from a total of 63 patients (n = 80 samples) throughout Scotland presenting with ocular eye disease, we describe the improvement in detection rates where an additional four positive cases were identified using a molecular assay versus culture. The testing of a further ten patients by confocal imaging is also presented. This report emphasizes the importance of continuing to improve clinical laboratory services to ensure a prompt, correct diagnosis and better prognosis, in addition to raising awareness of this potentially debilitating opportunistic pathogen.

  18. [Molecular biology methods in immunohematology].

    Science.gov (United States)

    Tournamille, C

    2013-05-01

    The molecular basis of almost all antigens of the 33 blood group systems are known. These knowledge and the advent of the PCR technology have allowed the DNA-based genotyping in order to predict the presence or absence of a blood group antigen on the cell membrane of red blood cells. DNA genotyping is required in cases where red blood cells patient cannot be used for serological typing either after a recent transfusion or because of the presence of autoantibodies on the red blood cells. Numerous DNA assays are available to detect any nucleotide polymorphism on the genes encoding blood group antigens. The technologies have improved to answer quickly to any case of transfusion emergency and to limit the risk of DNA contamination in a molecular diagnostic laboratory. Some technologies are ready for high-throughput blood group genotyping. They will be used in the future to obtain a fully typed blood group card of each donor but also to detect blood donors with rare phenotypes to register them to the Banque Nationale de Sang de Phénotype Rare (BNSPR). Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  19. A rapid cloning method employing orthogonal end protection

    NARCIS (Netherlands)

    Jakobi, A.J.|info:eu-repo/dai/nl/311489621; Huizinga, E.G.|info:eu-repo/dai/nl/12314969X

    2012-01-01

    We describe a novel in vitro cloning strategy that combines standard tools in molecular biology with a basic protecting group concept to create a versatile framework for the rapid and seamless assembly of modular DNA building blocks into functional open reading frames. Analogous to chemical

  20. Rapid sampling of molecular motions with prior information constraints.

    Directory of Open Access Journals (Sweden)

    Barak Raveh

    2009-02-01

    Full Text Available Proteins are active, flexible machines that perform a range of different functions. Innovative experimental approaches may now provide limited partial information about conformational changes along motion pathways of proteins. There is therefore a need for computational approaches that can efficiently incorporate prior information into motion prediction schemes. In this paper, we present PathRover, a general setup designed for the integration of prior information into the motion planning algorithm of rapidly exploring random trees (RRT. Each suggested motion pathway comprises a sequence of low-energy clash-free conformations that satisfy an arbitrary number of prior information constraints. These constraints can be derived from experimental data or from expert intuition about the motion. The incorporation of prior information is very straightforward and significantly narrows down the vast search in the typically high-dimensional conformational space, leading to dramatic reduction in running time. To allow the use of state-of-the-art energy functions and conformational sampling, we have integrated this framework into Rosetta, an accurate protocol for diverse types of structural modeling. The suggested framework can serve as an effective complementary tool for molecular dynamics, Normal Mode Analysis, and other prevalent techniques for predicting motion in proteins. We applied our framework to three different model systems. We show that a limited set of experimentally motivated constraints may effectively bias the simulations toward diverse predicates in an outright fashion, from distance constraints to enforcement of loop closure. In particular, our analysis sheds light on mechanisms of protein domain swapping and on the role of different residues in the motion.

  1. Computational methods for molecular docking

    Energy Technology Data Exchange (ETDEWEB)

    Klebe, G. [BASF AG, Ludwigshafen (Germany); Lengauer, T.

    1995-12-31

    This tutorial was one of eight tutorials selected to be presented at the Third International Conference on Intelligent Systems for Molecular Biology which was held in the United Kingdom from July 16 to 19, 1995. Recently, it has been demonstrated that the knowledge of the three-dimensional structure of the protein can be used to derive new protein ligands with improved binding properties. This tutorial focuses on the following questions: What is its binding affinity toward a particular receptor? What are putative conformations of a ligand at the binding site? What are the similarities of different ligands in terms of their recognition capabilities? Where and in which orientation will a ligand bind to the active site? How is a new putative protein ligand selected? An overview is presented of the algorithms which are presently used to handle and predict protein-ligand interactions and to dock small molecule ligands into proteins.

  2. Molecular methods for serovar determination of Salmonella.

    Science.gov (United States)

    Shi, Chunlei; Singh, Pranjal; Ranieri, Matthew Louis; Wiedmann, Martin; Moreno Switt, Andrea Isabel

    2015-01-01

    Salmonella is a diverse foodborne pathogen, which has more than 2600 recognized serovars. Classification of Salmonella isolates into serovars is essential for surveillance and epidemiological investigations; however, determination of Salmonella serovars, by traditional serotyping, has some important limitations (e.g. labor intensive, time consuming). To overcome these limitations, multiple methods have been investigated to develop molecular serotyping schemes. Currently, molecular methods to predict Salmonella serovars include (i) molecular subtyping methods (e.g. PFGE, MLST), (ii) classification using serovar-specific genomic markers and (iii) direct methods, which identify genes encoding antigens or biosynthesis of antigens used for serotyping. Here, we reviewed reported methodologies for Salmonella molecular serotyping and determined the "serovar-prediction accuracy", as the percentage of isolates for which the serovar was correctly classified by a given method. Serovar-prediction accuracy ranged from 0 to 100%, 51 to 100% and 33 to 100% for molecular subtyping, serovar-specific genomic markers and direct methods, respectively. Major limitations of available schemes are errors in predicting closely related serovars (e.g. Typhimurium and 4,5,12:i:-), and polyphyletic serovars (e.g. Newport, Saintpaul). The high diversity of Salmonella serovars represents a considerable challenge for molecular serotyping approaches. With the recent improvement in sequencing technologies, full genome sequencing could be developed into a promising molecular approach to serotype Salmonella.

  3. Detection of Streptococcus pyogenes using rapid visual molecular assay.

    Science.gov (United States)

    Zhao, Xiangna; He, Xiaoming; Li, Huan; Zhao, Jiangtao; Huang, Simo; Liu, Wei; Wei, Xiao; Ding, Yiwei; Wang, Zhaoyan; Zou, Dayang; Wang, Xuesong; Dong, Derong; Yang, Zhan; Yan, Xiabei; Huang, Liuyu; Du, Shuangkui; Yuan, Jing

    2015-09-01

    Streptococcus pyogenes is an increasingly important pathogen in many parts of the world. Rapid and accurate detection of S. pyogenes aids in the control of the infection. In this study, a loop-mediated isothermal amplification (LAMP) assay was developed and validated for the specific detection of S. pyogenes. The assay incorporates two methods: a chromogenic analysis using a calcein/Mn(2+) complex and real-time turbidity monitoring to assess the reaction. Both methods detected the target DNA within 60 min under 64°C isothermal conditions. The assay used specifically designed primers to target spy1258, and correctly identified 111 strains of S. pyogenes and 32 non-S. pyogenes strains, including other species of the genus Streptococcus. Tests using reference strains showed that the LAMP assay was highly specific. The sensitivity of the assay, with a detection limit of 1.49 pg DNA, was 10-fold greater than that of PCR. The LAMP assay established in this study is simple, fast and sensitive, and does not rely upon any special equipment; thus, it could be employed in clinical diagnosis. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Molecular Biological Methods in Environmental Engineering.

    Science.gov (United States)

    Li, Chunying; Xia, Fujun; Zhang, Yuhua; Chang, Chein-Chi; Wei, Dong; Wei, Li

    2017-10-01

    Microorganisms can respond fast to the environmental changes, and well suited for environmental assessment. DNA and RNA are generally extracted by extraction kits. After extraction, molecular biological methods including genomics, transcriptomics, proteomics and metabolomics are applied to characterize the genetic and functional diversity of microorganisms. Quantitative PCR, FISH and mass sequence of amplicons are also described. This review provides environmental engineers and microbiologists an overview of important advancements in molecular techniques and highlights the application of these methods in diverse environments.

  5. Fast method for quantum mechanical molecular dynamics

    Science.gov (United States)

    Niklasson, Anders M. N.; Cawkwell, Marc J.

    2012-11-01

    As the processing power available for scientific computing grows, first-principles Born-Oppenheimer molecular dynamics simulations are becoming increasingly popular for the study of a wide range of problems in materials science, chemistry, and biology. Nevertheless, the computational cost of Born-Oppenheimer molecular dynamics still remains prohibitively large for many potential applications. Here we show how to avoid a major computational bottleneck: the self-consistent-field optimization prior to force calculations. The optimization-free quantum mechanical molecular dynamics method gives trajectories that are almost indistinguishable from an “exact” microcanonical Born-Oppenheimer molecular dynamics simulation even when low-prefactor linear scaling sparse matrix algebra is used. Our findings show that the computational gap between classical and quantum mechanical molecular dynamics simulations can be significantly reduced.

  6. THE CURRENT METHODS FOR MOLECULAR DIAGNOSTICS OF FISH DISEASES (REVIEW

    Directory of Open Access Journals (Sweden)

    O. Zaloilo

    2016-06-01

    Full Text Available Purpose. The methods of molecular diagnostic (MMD gradually become widespread in modern fish farming. MMD contain a wide variety of specific approaches, each of which has distinct limits of their possible applications and is characterized by individual peculiarities in practical performance. In addition to high sensitivity and the possibility of rapid diagnostics, the main advantage of molecular methods is to determine the uncultivated infectious agents. DNA amplification allows identifying pathogenic microorganisms at very small quantities even in the minimum sample volume. Molecular methods of diagnostic enable the determination of infection in latent or acute phases. These methods allow showing the differences between pathogens with similar antigenic structures. The current literature data on this subject usually show a methodology in the narrow context of the tasks or practical results obtained through such approaches. Thus, a synthesis of existing information on the mechanisms of action and the limits of the typical problems of basic methods of molecular diagnostics are an urgent task of fish breeding. In particular, the following description will more effectively choose one or several approaches to identify pathogens in fish. Findings. This paper reviews the basic molecular methods that are used in the world's aquaculture for diagnosis of various diseases in commercial fish species. Originality. This work is a generalization of data on the principles and mechanisms for the implementation of diagnostics based on modern molecular techniques. For each of the mentioned approaches, the most promising areas of application were shown. The information is provided in the form of a comparative analysis of each methodology, indicating positive and negative practical aspects. Practical value. The current review of modern methods of molecular diagnostic in aquaculture is focused on practical application. Generalizing and analytical information can be

  7. A multi-centre prospective evaluation of the Check-Direct ESBL Screen for BD MAX as a rapid molecular screening method for extended-spectrum beta-lactamase-producing Enterobacteriaceae rectal carriage.

    Science.gov (United States)

    Engel, T; Slotboom, B J; van Maarseveen, N; van Zwet, A A; Nabuurs-Franssen, M H; Hagen, F

    2017-11-01

    A multiplex extended-spectrum beta-lactamase-producing Enterobacteriaceae (ESBL-E) quantitative polymerase chain reaction (qPCR), performed directly on rectal swabs, was compared with a culture-based protocol to study the discrepancies between the two methods, and identify existing challenges to apply this assay in routine clinical practice. The secondary objective was to assess the performance of the qPCR. In two Dutch teaching hospitals, 573 rectal swabs were collected prospectively. Culture with additional testing with the Check-MDR CT103XL (Check-Points) was compared with the Check-Direct ESBL Screen for BD MAX (Check-Points), which detects the presence of the ESBL gene families CTX-M1, CTX-M2, CTX-M9 and SHV2/5-ESBL. The culture-based protocol (with Brilliance agar) was considered as the gold standard to assess the performance of the qPCR. Of the 573 rectal swabs, 74 (12.9%) were culture-positive. Eighty-four (14.7%) were qPCR-positive. There were eight culture-positive/qPCR-negative discrepancies and 18 culture-negative/qPCR-positive discrepancies. Sensitivity and specificity of qPCR vs culture were 87.7% [95% confidence interval (CI) 79.7-95.7] and 96.3% (95% CI 94.6-98.0), respectively. The Check-Direct ESBL Screen for the BD MAX is an easy-to-perform, quick molecular diagnostic test with the potential to significantly speed up screening for rectal ESBL-E carriage. Discrepancies were observed between the culture-based protocol and the qPCR in 4.5% of tested samples. Existing challenges for implementing qPCR are its limited sensitivity, the need for thorough knowledge of the local ESBL-E genes, and interpretation of culture-negative but qPCR-positive samples. It is believed that the limited sensitivity of qPCR could be optimized by including blaTEM as a molecular target, and improving the limit of detection. Copyright © 2017 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  8. RAPID METHOD FOR DETERMINATION OF RADIOSTRONTIUM IN EMERGENCY MILK SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S.; Culligan, B.

    2008-07-17

    A new rapid separation method for radiostrontium in emergency milk samples was developed at the Savannah River Site (SRS) Environmental Bioassay Laboratory (Aiken, SC, USA) that will allow rapid separation and measurement of Sr-90 within 8 hours. The new method uses calcium phosphate precipitation, nitric acid dissolution of the precipitate to coagulate residual fat/proteins and a rapid strontium separation using Sr Resin (Eichrom Technologies, Darien, IL, USA) with vacuum-assisted flow rates. The method is much faster than previous method that use calcination or cation exchange pretreatment, has excellent chemical recovery, and effectively removes beta interferences. When a 100 ml sample aliquot is used, the method has a detection limit of 0.5 Bq/L, well below generic emergency action levels.

  9. Application of Molecular Cytogenetic Technique for Rapid Prenatal Diagnosis of Aneuploidies in Iranian Population

    Directory of Open Access Journals (Sweden)

    Habib Nasiri

    2009-06-01

    Full Text Available Objective: Classic cell culture and karyotyping is routinely used for prenatal detection of different chromosomal abnormalities. Molecular cytogenetic techniques have also recently been developed and used for this purpose. Quantitative florescence PCR using short tandem repeat (STR markers has more potential for high throughput diagnosis. Marker heterozygosity in short tandem repeats (STR is of critical importance in the clinical applicablity of this method. Materials and Methods: Different STR markers on chromosomes 13, 18, 21, X and Y  were analysed from  amniotic samples to detect related disorders such as Down, Edward, Patau,  Klinefelter sundromes , as well as sex chromosomes numerical abnormalities . Results: In our population some markers (D18S976, DXS6854, D21S11, and D21S1411 showed alleles with sizes out of expected ranges. But others occupied narrower range of predicted distribution. Most markers have enough heterozygosity (66.3-94.7 to be used for prenatal diagnosis. Furthermore, results obtained from full karyotype for all samples were in concordance with results of molecular cytogenetic testing. Conclusion: It is concluded that, in urgent situations, if proper markers used, molecular cytogenetic testing (QF-PCR could be a useful method for rapid prenatal diagnosis (PND in populations with high rate of consanguinity such as Iran.  

  10. Molecular microbiological methods in the diagnosis of neonatal sepsis

    Science.gov (United States)

    Venkatesh, Mohan; Flores, Angela; Luna, Ruth Ann; Versalovic, James

    2010-01-01

    Neonatal sepsis is a major cause of neonatal mortality and morbidity. The current gold standard for diagnosis of sepsis, namely blood culture, suffers from low sensitivity and a reporting delay of approximately 48–72 h. Rapid detection of sepsis and institution of antimicrobial therapy may improve patient outcomes. Rapid and sensitive tests that can inform clinicians regarding the institution or optimization of antimicrobial therapy are urgently needed. The ideal diagnostic test should have adequate specificity and negative predictive value to reliably exclude sepsis and avoid unnecessary antibiotic therapy. We comprehensively searched for neonatal studies that evaluated molecular methods for diagnosis of sepsis. We identified 19 studies that were assessed with respect to assay methodology and diagnostic characteristics. In addition, we also reviewed newer molecular microbiological assays of relevance that have not been fully evaluated in neonates. Molecular methods offer distinct advantages over blood cultures, including increased sensitivity and rapid diagnosis. However, diagnostic accuracy and cost–effectiveness should be established before implementation in clinical practice. PMID:20818947

  11. Molecular Combing of DNA: Methods and Applications

    DEFF Research Database (Denmark)

    Nazari, Zeniab Esmail; Gurevich, Leonid

    2013-01-01

    First proposed in 1994, molecular combing of DNA is a technique that allows adsorption and alignment of DNA on the surface with no need for prior modification of the molecule. Since then, many variations of the original method have been devised and used in a wide range of applications from genomi...... of the main methods in molecular combing as well as its major applications in nanotechnology.......First proposed in 1994, molecular combing of DNA is a technique that allows adsorption and alignment of DNA on the surface with no need for prior modification of the molecule. Since then, many variations of the original method have been devised and used in a wide range of applications from genomic...

  12. A rapid, one step molecular identification of Trichoderma citrinoviride and Trichoderma reesei.

    Science.gov (United States)

    Saroj, Dina B; Dengeti, Shrinivas N; Aher, Supriya; Gupta, Anil K

    2015-06-01

    Trichoderma species are widely used as production hosts for industrial enzymes. Identification of Trichoderma species requires a complex molecular biology based identification involving amplification and sequencing of multiple genes. Industrial laboratories are required to run identification tests repeatedly in cell banking procedures and also to prove absence of production host in the product. Such demands can be fulfilled by a brief method which enables confirmation of strain identity. This communication describes one step identification method for two common Trichoderma species; T. citrinoviride and T. reesei, based on identification of polymorphic region in the nucleotide sequence of translation elongation factor 1 alpha. A unique forward primer and common reverse primer resulted in 153 and 139 bp amplicon for T. citrinoviride and T. reesei, respectively. Simplification was further introduced by using mycelium as template for PCR amplification. Method described in this communication allows rapid, one step identification of two Trichoderma species.

  13. A universal, rapid, and inexpensive method for genomic DNA ...

    Indian Academy of Sciences (India)

    MOHAMMED BAQUR SAHIB A. AL-SHUHAIB

    Abstract. There is no 'one' procedure for extracting DNA from the whole blood of both mammals and birds, since each species has a unique property that require different methods to release its own DNA. Therefore, to obtain genomic DNA, a universal, rapid, and noncostly method was developed. A very simple biological ...

  14. Rapid, cost-effective liquid chromatograghic method for the ...

    African Journals Online (AJOL)

    GRACE

    2006-07-03

    Jul 3, 2006 ... 1Department of Medicinal Chemistry and Quality Control, National Institute for Pharmaceutical Research and Development, Abuja,. Nigeria. ... A rapid and cost effective method for the analysis of metronidazole in biological samples was ... effective HPLC method of assaying metronidazole both in.

  15. A universal, rapid, and inexpensive method for genomic DNA ...

    Indian Academy of Sciences (India)

    ... of both mammals and birds, since each species has a unique property that require different methods to release its own DNA. Therefore, to obtain genomic DNA, a universal, rapid, and noncostly method was developed. A very simple biological basis is followed in this procedure, in which, when the bloodis placed in water, ...

  16. Use of molecular beacons for the rapid analysis of DNA damage induced by exposure to an atmospheric pressure plasma jet

    Energy Technology Data Exchange (ETDEWEB)

    Kurita, Hirofumi, E-mail: kurita@ens.tut.ac.jp, E-mail: mizuno@ens.tut.ac.jp; Miyachika, Saki; Yasuda, Hachiro; Takashima, Kazunori; Mizuno, Akira, E-mail: kurita@ens.tut.ac.jp, E-mail: mizuno@ens.tut.ac.jp [Department of Environmental and Life Sciences, Toyohashi University of Technology, Aichi 441-8580 (Japan)

    2015-12-28

    A rapid method for evaluating the damage caused to DNA molecules upon exposure to plasma is demonstrated. Here, we propose the use of a molecular beacon for rapid detection of DNA strand breaks induced by atmospheric pressure plasma jet (APPJ) irradiation. Scission of the molecular beacon by APPJ irradiation leads to separation of the fluorophore-quencher pair, resulting in an increase in fluorescence that directly correlates with the DNA strand breaks. The results show that the increase in fluorescence intensity is proportional to the exposure time and the rate of fluorescence increase is proportional to the discharge power. This simple and rapid method allows the estimation of DNA damage induced by exposure to a non-thermal plasma.

  17. Molecular energies from an incremental fragmentation method

    Science.gov (United States)

    Meitei, Oinam Romesh; Heßelmann, Andreas

    2016-02-01

    The systematic molecular fragmentation method by Collins and Deev [J. Chem. Phys. 125, 104104 (2006)] has been used to calculate total energies and relative conformational energies for a number of small and extended molecular systems. In contrast to the original approach by Collins, we have tested the accuracy of the fragmentation method by utilising an incremental scheme in which the energies at the lowest level of the fragmentation are calculated on an accurate quantum chemistry level while lower-cost methods are used to correct the low-level energies through a high-level fragmentation. In this work, the fragment energies at the lowest level of fragmentation were calculated using the random-phase approximation (RPA) and two recently developed extensions to the RPA while the incremental corrections at higher levels of the fragmentation were calculated using standard density functional theory (DFT) methods. The complete incremental fragmentation method has been shown to reproduce the supermolecule results with a very good accuracy, almost independent on the molecular type, size, or type of decomposition. The fragmentation method has also been used in conjunction with the DFT-SAPT (symmetry-adapted perturbation theory) method which enables a breakdown of the total nonbonding energy contributions into individual interaction energy terms. Finally, the potential problems of the method connected with the use of capping hydrogen atoms are analysed and two possible solutions are supplied.

  18. Methods for Rapid Screening in Woody Plant Herbicide Development

    Directory of Open Access Journals (Sweden)

    William Stanley

    2014-07-01

    Full Text Available Methods for woody plant herbicide screening were assayed with the goal of reducing resources and time required to conduct preliminary screenings for new products. Rapid screening methods tested included greenhouse seedling screening, germinal screening, and seed screening. Triclopyr and eight experimental herbicides from Dow AgroSciences (DAS 313, 402, 534, 548, 602, 729, 779, and 896 were tested on black locust, loblolly pine, red maple, sweetgum, and water oak. Screening results detected differences in herbicide and species in all experiments in much less time (days to weeks than traditional field screenings and consumed significantly less resources (<500 mg acid equivalent per herbicide per screening. Using regression analysis, various rapid screening methods were linked into a system capable of rapidly and inexpensively assessing herbicide efficacy and spectrum of activity. Implementation of such a system could streamline early-stage herbicide development leading to field trials, potentially freeing resources for use in development of beneficial new herbicide products.

  19. Methods and systems for rapid prototyping of high density circuits

    Science.gov (United States)

    Palmer, Jeremy A [Albuquerque, NM; Davis, Donald W [Albuquerque, NM; Chavez, Bart D [Albuquerque, NM; Gallegos, Phillip L [Albuquerque, NM; Wicker, Ryan B [El Paso, TX; Medina, Francisco R [El Paso, TX

    2008-09-02

    A preferred embodiment provides, for example, a system and method of integrating fluid media dispensing technology such as direct-write (DW) technologies with rapid prototyping (RP) technologies such as stereolithography (SL) to provide increased micro-fabrication and micro-stereolithography. A preferred embodiment of the present invention also provides, for example, a system and method for Rapid Prototyping High Density Circuit (RPHDC) manufacturing of solderless connectors and pilot devices with terminal geometries that are compatible with DW mechanisms and reduce contact resistance where the electrical system is encapsulated within structural members and manual electrical connections are eliminated in favor of automated DW traces. A preferred embodiment further provides, for example, a method of rapid prototyping comprising: fabricating a part layer using stereolithography and depositing thermally curable media onto the part layer using a fluid dispensing apparatus.

  20. A rapid ultrasound particle agglutination method for HIV antibody detection: Comparison with conventional rapid HIV tests.

    Science.gov (United States)

    Bystryak, Simon; Ossina, Natalya

    2017-11-01

    We present the results of the feasibility and preliminary studies on analytical performance of a rapid test for detection of human immunodeficiency virus (HIV) antibodies in human serum or plasma that is an important advance in detecting HIV infection. Current methods for rapid testing of antibodies against HIV are qualitative and exhibit poor sensitivity (limit of detection). In this paper, we describe an ultrasound particle agglutination (UPA) method that leads to a significant increase of the sensitivity of conventional latex agglutination tests for HIV antibody detection in human serum or plasma. The UPA method is based on the use of: 1) a dual mode ultrasound, wherein a first single-frequency mode is used to accelerate the latex agglutination process, and then a second swept-frequency mode of sonication is used to disintegrate non-specifically bound aggregates; and 2) a numerical assessment of results of the agglutination process. The numerical assessment is carried out by optical detection and analysis of moving patterns in the resonator cell during the swept-frequency mode. The single-step UPA method is rapid and more sensitive than the three commercial rapid HIV test kits analyzed in the study: analytical sensitivity of the new UPA method was found to be 510-, 115-, and 80-fold higher than that for Capillus™, Multispot™ and Uni-Gold™ Recombigen HIV antibody rapid test kits, respectively. The newly developed UPA method opens up additional possibilities for detection of a number of clinically significant markers in point-of-care settings. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Introducing molecular selectivity in rapid impedimetric sensing of phthalates

    KAUST Repository

    Zia, Asif I.

    2014-05-01

    This research article reports a real-time and non-invasive detection technique for phthalates in liquids by Electrochemical Impedance Spectroscopy (EIS), incorporating molecular imprinting technique to introduce selectivity for the phthalate molecule in the detection system. A functional polymer with Bis (2-ethylhexyl) phthalate (DEHP) template was immobilized on the sensing surface of the inter-digital (ID) capacitive sensor with sputtered gold sensing electrodes fabricated over a native layer of silicon dioxide on a single crystal silicon substrate. Various concentrations (10 to 200 ppm) of DEHP in deionized MilliQ water were exposed to the sensor surface functionalized with molecular imprinted polymer (MIP) in order to capture the analyte molecule, hence introducing molecular selectivity to the testing system. Impedance spectra were obtained using EIS in order to determine sample conductance for evaluation of phthalate concentration in the solution. Electrochemical Spectrum Analyzer algorithm was used to deduce equivalent circuit and equivalent component parameters from the experimentally obtained impedance spectra employing Randle\\'s cell model curve fitting technique. Experimental results confirmed that the immobilization of the functional polymer on sensing surface introduces selectivity for phthalates in the sensing system. The results were validated by testing the samples using High Performance Liquid Chromatography (HPLC-DAD). © 2014 IEEE.

  2. Comparative studies on different molecular methods for ...

    African Journals Online (AJOL)

    The present study aims to evaluate two molecular methods for epidemiological typing of multi drug resistant Klebsiella pneumoniae isolated from Mansoura Hospitals. In this study, a total of 300 clinical isolates were collected from different patients distributed among Mansoura Hospitals, Dakahlia governorate, Egypt.

  3. Molecular Methods for Diagnosis of Infective Endocarditis

    OpenAIRE

    Moter, Annette; Musci, Michele; Schmiedel, Dinah

    2002-01-01

    Infective endocarditis (IE) is a life-threatening disease associated with high mortality. Conventional microbiologic diagnosis is based mainly on culture-dependent methods that often fail because of previous antibiotic therapy or the involvement of fastidious or slowly growing microorganisms. In recent years, molecular techniques entered the field of routine diagnostics. Amplification-based methods proved useful for detection of microorganisms in heart valve tissue. More recently, they were a...

  4. Intraoperative Molecular Imaging for Rapid Assessment of Tumor Margins

    Science.gov (United States)

    2011-09-01

    approach in animal models using a the MRI- FMT imaging system (Task 5). A description of the primary accomplishments and ongoing efforts follows...guided fluorescence molecular tomography ( FMT ) of ( ) ( ) ( ) tBP k NTNTT etCBP kRktCRtC + − ∗    + ++= 12121 2 1 9 two fluorescent probes in...administration, mice were imaged for an hour at approximately two minutes per frame using an MR-coupled FMT system. The imaging system is a spectrometer

  5. Rapid detection of coliforms in drinking water of Arak city using multiplex PCR method in comparison with the standard method of culture (Most Probably Number)

    OpenAIRE

    fatemeh, Dehghan; Reza, Zolfaghari Mohammad; Mohammad, Arjomandzadegan; Salomeh, Kalantari; Reza, Ahmari Gholam; Hossein, Sarmadian; Maryam, Sadrnia; Azam, Ahmadi; Mana, Shojapoor; Negin, Najarian; Reza, Kasravi Alii; Saeed, Falahat

    2014-01-01

    Objective: To analyse molecular detection of coliforms and shorten the time of PCR. Methods: Rapid detection of coliforms by amplification of lacZ and uidA genes in a multiplex PCR reaction was designed and performed in comparison with most probably number (MPN) method for 16 artificial and 101 field samples. The molecular method was also conducted on isolated coliforms from positive MPN samples; standard sample for verification of microbial method certificated reference material; isolated...

  6. RAPID SEPARATION METHOD FOR ACTINIDES IN EMERGENCY SOIL SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S.; Culligan, B.; Noyes, G.

    2009-11-09

    A new rapid method for the determination of actinides in soil and sediment samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for samples up to 2 grams in emergency response situations. The actinides in soil method utilizes a rapid sodium hydroxide fusion method, a lanthanum fluoride soil matrix removal step, and a streamlined column separation process with stacked TEVA, TRU and DGA Resin cartridges. Lanthanum was separated rapidly and effectively from Am and Cm on DGA Resin. Vacuum box technology and rapid flow rates are used to reduce analytical time. Alpha sources are prepared using cerium fluoride microprecipitation for counting by alpha spectrometry. The method showed high chemical recoveries and effective removal of interferences. This new procedure was applied to emergency soil samples received in the NRIP Emergency Response exercise administered by the National Institute for Standards and Technology (NIST) in April, 2009. The actinides in soil results were reported within 4-5 hours with excellent quality.

  7. Molecular Detection of Foodborne Pathogens: A Rapid and Accurate Answer to Food Safety.

    Science.gov (United States)

    Mangal, Manisha; Bansal, Sangita; Sharma, Satish K; Gupta, Ram K

    2016-07-03

    Food safety is a global health concern. For the prevention and recognition of problems related to health and safety, detection of foodborne pathogen is of utmost importance at all levels of food production chain. For several decades, a lot of research has been targeted at the development of rapid methodology as reducing the time needed to complete pathogen detection tests has been the primary goal of food microbiologists. With the result, food microbiology laboratories now have a wide array of detection methods and automated technologies such as enzyme immunoassay, polymerase chain reaction, and microarrays, which can cut test times considerably. Nucleic acid amplification strategies and advances in amplicon detection methodologies have been the key factors in the progress of molecular microbiology. A comprehensive literature survey has been carried out to give an overview in the field of foodborne pathogen detection. In this paper, we describe the conventional methods, as well as recent developments in food pathogen detection, identification, and quantification, with a major emphasis on molecular detection methods.

  8. Rapid method to estimate temperature changes in electronics elements

    Directory of Open Access Journals (Sweden)

    Oborskii G. A., Savel’eva O. S., Shikhireva Yu. V.

    2014-06-01

    Full Text Available Thermal behavior of electronic equipment is the determining factor for performing rapid assessment of the effectiveness of design and operation of the equipment. The assessment method proposed in this article consists in fixation of an infrared video stream from the surface of the device and converting it into a visible flow by means of a thermal imager, splitting it into component colors and their further processing using parabolic transformation. The result of the transformation is the number used as a rapid criterion for estimation of distribution stability of heat in the equipment.

  9. Novel single-chain antibody-targeted microbubbles for molecular ultrasound imaging of thrombosis: validation of a unique noninvasive method for rapid and sensitive detection of thrombi and monitoring of success or failure of thrombolysis in mice.

    Science.gov (United States)

    Wang, Xiaowei; Hagemeyer, Christoph E; Hohmann, Jan David; Leitner, Ephraem; Armstrong, Paul C; Jia, Fu; Olschewski, Manfred; Needles, Andrew; Peter, Karlheinz; Ahrens, Ingo

    2012-06-26

    Molecular imaging is a fast emerging technology allowing noninvasive detection of vascular pathologies. However, imaging modalities offering high resolution currently do not allow real-time imaging. We hypothesized that contrast-enhanced ultrasound with microbubbles (MBs) selectively targeted to activated platelets would offer high-resolution, real-time molecular imaging of evolving and dissolving arterial thrombi. Lipid-shell based gas-filled MBs were conjugated to either a single-chain antibody specific for activated glycoprotein IIb/IIIa via binding to a Ligand-Induced Binding Site (LIBS-MBs) or a nonspecific single-chain antibody (control MBs). Successful conjugation was assessed in flow cytometry and immunofluorescence double staining. LIBS-MBs but not control MBs strongly adhered to both immobilized activated platelets and microthrombi under flow. Thrombi induced in carotid arteries of C57Bl6 mice in vivo by ferric chloride injury were then assessed with ultrasound before and 20 minutes after MB injection through the use of gray-scale area intensity measurement. Gray-scale units converted to decibels demonstrated a significant increase after LIBS-MB but not after control MB injection (9.55±1.7 versus 1.46±1.3 dB; P<0.01). Furthermore, after thrombolysis with urokinase, LIBS-MB ultrasound imaging allows monitoring of the reduction of thrombus size (P<0.001). We demonstrate that glycoprotein IIb/IIIa-targeted MBs specifically bind to activated platelets in vitro and allow real-time molecular imaging of acute arterial thrombosis and monitoring of the success or failure of pharmacological thrombolysis in vivo.

  10. Molecular dynamics simulation studies of structural and dynamical properties of rapidly quenched Al

    Energy Technology Data Exchange (ETDEWEB)

    Shen, B.; Liu, C. Y.; Jia, Y.; Yue, G. Q.; Ke, F. S.; Zhao, H. B.; Chen, L. Y.; Wang, S. Y.; Wang, C. Z.; Ho, K. M.

    2014-01-01

    The structural and dynamical properties of rapidly quenched Al are studied by molecular dynamics simulations. The pair-correlation function of high temperature liquid Al agrees well with the experimental results. Different cooling rates are applied with high cooling rates leading to glass formation, while low cooling rates leading to crystallization. The local structures are characterized by Honeycutt–Andersen indices and Voronoi tessellation analysis. The results show that for high cooling rates, the local structures of the liquid and glassy Al are predominated by icosahedral clusters, together with considerable amount of face-centered cubic and hexagonal close packed short-range orders. These short-range order results are further confirmed using the recently developed atomic cluster alignment method. Moreover, the atomic cluster alignment clearly shows the crystal nucleation process in supercooled liquid of Al. Finally, the mean square displacement for the liquid is also analyzed, and the corresponding diffusion coefficient as a function of temperature is calculated.

  11. Evaluation of a Rapid Method of Determination of Plasma Fibrinogen

    Science.gov (United States)

    Thomson, G. W.; McSherry, B. J.; Valli, V. E. O.

    1974-01-01

    An evaluation was made of a rapid semiautomated method of determining fibrinogen levels in bovine plasma. This method, the fibrometer method of Morse, Panek and Menga (8), is based on the principle that when thrombin is added to suitably diluted plasma the time of clotting is linearly related to the fibrinogen concentration. A standard curve prepared using bovine plasma had an r value of .9987 and analysis of variance showed there was no significant deviation from regression. A comparison of the fibrometer method and the biuret method of Ware, Guest and Seegers done on 158 bovine plasma samples showed good correlation between the two methods. It was concluded that the fibrometer method does measure bovine fibrinogen and has considerable merit for use in clinical diseases of cattle. PMID:4277474

  12. Rapid methods for determination of fluoxetine in pharmaceutical formulations.

    Science.gov (United States)

    Mandrioli, R; Pucci, V; Visini, D; Varani, G; Raggi, M A

    2002-08-01

    Two different analytical methods for the quality control of fluoxetine in commercial formulations have been developed and compared: a spectrofluorimetric method and a capillary zone electrophoretic (CZE) method. The fluorescence emission values were measured at lambda=293 nm when exciting at lambda=230 nm. The CZE method used an uncoated fused-silica capillary and pH 2.5 phosphate buffer as the background electrolyte. The extraction of fluoxetine from the capsules consisted of a simple one-step dissolution with methanol/water, filtration and dilution. Both methods gave satisfactory results in terms of precision; the best results were obtained for the electrophoretic method, with RSD% values always lower than 2.0%. The accuracy was assessed by means of recovery studies, which gave very good results, between 97.5 and 102.6%. Furthermore, both methods also have the advantage of being very rapid.

  13. A simple and rapid method for determining transgenic cotton plants.

    Science.gov (United States)

    Zhang, Baohong; Wang, Hongmei; Liu, Fang; Wang, Qinglian

    2013-01-01

    Determining transgenic events is a critical step for obtaining transgenic plants as well as the later stage of application. Traditional methods, such as Northern blotting and qRT-PCR, for determining transgenic events either require radioactively labeled substrates, expensive instruments, or long-time commitments, which result in lab and time-consuming as well as expensive costs. These methods also require destroying the transgenic events. In this chapter, we present a simple and rapid method for determining transgenic cotton plants in both laboratory and field conditions. This method is based on the sensitivity of transgenic and non-transgenic plants to a specific chemical, such as antibiotics or herbicides. This method will facilitate the screening of transgenic events, save time, reduce cost, and speed up the application of transgenic technology on cotton breeding and production. More important, this is a nondestructive bioassay method; the transgenic plants can be transferred into greenhouse or field for the later study after the detection process.

  14. Rapid and selective method for quantitation of metronidazole in pharmaceuticals.

    Science.gov (United States)

    Sanyal, A K

    1988-01-01

    A selective and highly sensitive assay for N-1-substituted nitroimidazoles has been modified and adapted for rapid estimation of metronidazole in pharmaceuticals. The color reaction is based on diazotization of sulfanilamide with the nitrite ions liberated by alkaline hydrolysis of metronidazole and subsequent coupling of the diazonium salt with N-1-(naphthyl)-ethylenediamine dihydrochloride. This method is applicable for the assay of benzoyl metronidazole in oral suspension. Officially recommended excipients and preservatives do not interfere.

  15. Preparing Silica Aerogel Monoliths via a Rapid Supercritical Extraction Method

    Science.gov (United States)

    Gorka, Caroline A.

    2014-01-01

    A procedure for the fabrication of monolithic silica aerogels in eight hours or less via a rapid supercritical extraction process is described. The procedure requires 15-20 min of preparation time, during which a liquid precursor mixture is prepared and poured into wells of a metal mold that is placed between the platens of a hydraulic hot press, followed by several hours of processing within the hot press. The precursor solution consists of a 1.0:12.0:3.6:3.5 x 10-3 molar ratio of tetramethylorthosilicate (TMOS):methanol:water:ammonia. In each well of the mold, a porous silica sol-gel matrix forms. As the temperature of the mold and its contents is increased, the pressure within the mold rises. After the temperature/pressure conditions surpass the supercritical point for the solvent within the pores of the matrix (in this case, a methanol/water mixture), the supercritical fluid is released, and monolithic aerogel remains within the wells of the mold. With the mold used in this procedure, cylindrical monoliths of 2.2 cm diameter and 1.9 cm height are produced. Aerogels formed by this rapid method have comparable properties (low bulk and skeletal density, high surface area, mesoporous morphology) to those prepared by other methods that involve either additional reaction steps or solvent extractions (lengthier processes that generate more chemical waste).The rapid supercritical extraction method can also be applied to the fabrication of aerogels based on other precursor recipes. PMID:24637334

  16. Next-Generation Sequencing-Aided Rapid Molecular Diagnosis of Occult Macular Dystrophy in a Chinese Family

    OpenAIRE

    Yu-He Qi; Feng-Juan Gao; Fang-Yuan Hu; Sheng-Hai Zhang; Jun-Yi Chen; Wan-Jing Huang; Guo-Hong Tian; Min Wang; De-Kang Gan; Ji-Hong Wu; Ge-Zhi Xu

    2017-01-01

    Purpose: To show early, rapid and accurate molecular diagnosis of occult macular dystrophy (OMD) in a four-generation Chinese family with inherited macular dystrophy.Methods: In the current study, we comprehensively screened 130 genes involved in common inherited non-syndromic eye diseases with next-generation sequencing-based target capture sequencing of the proband of a four-generation Chinese family that has suffered from maculopathy without a definitive diagnosis for over 10 years. Varian...

  17. Rapid Enzymatic Method for Pectin Methyl Esters Determination

    Directory of Open Access Journals (Sweden)

    Lucyna Łękawska-Andrinopoulou

    2013-01-01

    Full Text Available Pectin is a natural polysaccharide used in food and pharma industries. Pectin degree of methylation is an important parameter having significant influence on pectin applications. A rapid, fully automated, kinetic flow method for determination of pectin methyl esters has been developed. The method is based on a lab-made analyzer using the reverse flow-injection/stopped flow principle. Methanol is released from pectin by pectin methylesterase in the first mixing coil. Enzyme working solution is injected further downstream and it is mixed with pectin/pectin methylesterase stream in the second mixing coil. Methanol is oxidized by alcohol oxidase releasing formaldehyde and hydrogen peroxide. This reaction is coupled to horse radish peroxidase catalyzed reaction, which gives the colored product 4-N-(p-benzoquinoneimine-antipyrine. Reaction rate is proportional to methanol concentration and it is followed using Ocean Optics USB 2000+ spectrophotometer. The analyzer is fully regulated by a lab written LabVIEW program. The detection limit was 1.47 mM with an analysis rate of 7 samples h−1. A paired t-test with results from manual method showed that the automated method results are equivalent to the manual method at the 95% confidence interval. The developed method is rapid and sustainable and it is the first application of flow analysis in pectin analysis.

  18. A multi-centre prospective evaluation of the Check-Direct ESBL Screen for BD MAX as a rapid molecular screening method for extended-spectrum beta-lactamase-producing Enterobacteriaceae rectal carriage

    NARCIS (Netherlands)

    Engel, T.G.; Slotboom, B.J.; Maarseveen, N. van; Zwet, A.A. van; Nabuurs-Franssen, M.H.; Hagen, F.

    2017-01-01

    OBJECTIVE: A multiplex extended-spectrum beta-lactamase-producing Enterobacteriaceae (ESBL-E) quantitative polymerase chain reaction (qPCR), performed directly on rectal swabs, was compared with a culture-based protocol to study the discrepancies between the two methods, and identify existing

  19. Fabrication of Polymerase Chain Reaction Plastic Lab-on-a-Chip Device for Rapid Molecular Diagnoses

    Science.gov (United States)

    2016-01-01

    Purpose: We aim to fabricate a thermoplastic poly(methylmethacrylate) (PMMA) Lab-on-a-Chip device to perform continuous- flow polymerase chain reactions (PCRs) for rapid molecular detection of foodborne pathogen bacteria. Methods: A miniaturized plastic device was fabricated by utilizing PMMA substrates mediated by poly(dimethylsiloxane) interfacial coating, enabling bonding under mild conditions, and thus avoiding the deformation or collapse of microchannels. Surface characterizations were carried out and bond strength was measured. The feasibility of the Lab-on-a-Chip device for performing on-chip PCR utilizing a lab-made, portable dual heater was evaluated. The results were compared with those obtained using a commercially available thermal cycler. Results: A PMMA Lab-on-a-Chip device was designed and fabricated for conducting PCR using foodborne pathogens as sample targets. A robust bond was established between the PMMA substrates, which is essential for performing miniaturized PCR on plastic. The feasibility of on-chip PCR was evaluated using Escherichia coli O157:H7 and Cronobacter condimenti, two worldwide foodborne pathogens, and the target amplicons were successfully amplified within 25 minutes. Conclusions: In this study, we present a novel design of a low-cost and high-throughput thermoplastic PMMA Lab-on-a-Chip device for conducting microscale PCR, and we enable rapid molecular diagnoses of two important foodborne pathogens in minute resolution using this device. In this regard, the introduced highly portable system design has the potential to enable PCR investigations of many diseases quickly and accurately. PMID:27230459

  20. The Use of MoStBioDat for Rapid Screening of Molecular Diversity

    Directory of Open Access Journals (Sweden)

    Agata Kurczyk

    2009-09-01

    Full Text Available MoStBioDat is a uniform data storage and extraction system with an extensive array of tools for structural similarity measures and pattern matching which is essential to facilitate the drug discovery process. Structure-based database screening has recently become a common and efficient technique in early stages of the drug development, shifting the emphasis from rational drug design into the probability domain of more or less random discovery. The virtual ligand screening (VLS, an approach based on high-throughput flexible docking, samples a virtually infinite molecular diversity of chemical libraries increasing the concentration of molecules with high binding affinity. The rapid process of subsequent examination of a large number of molecules in order to optimize the molecular diversity is an attractive alternative to the traditional methods of lead discovery. This paper presents the application of the MoStBioDat package not only as a data management platform but mainly in substructure searching. In particular, examples of the applications of MoStBioDat are discussed and analyzed.

  1. Molecular Physics: Theoretical Principles and Experimental Methods

    Science.gov (United States)

    Demtröder, Wolfgang

    2005-11-01

    The richly illustrated book comprehensively explains the important principles of diatomic and polyatomic molecules and their spectra in two separate, distinct parts. The first part concentrates on the theoretical aspects of molecular physics, such as the vibration, rotation, electronic states, potential curves, and spectra of molecules. The different methods of approximation for the calculation of electronic wave functions and their energy are also covered. The introduction of basics terms used in group theory and their meaning in molecular physics enables an elegant description of polyatomic molecules and their symmetries. Molecular spectra and the dynamic processes involved in their excited states are given its own chapter. The theoretical part then concludes with a discussion of the field of Van der Waals molecules and clusters. The second part is devoted entirely to experimental techniques, such as laser, Fourier, NMR, and ESR spectroscopies, used in the fields of physics, chemistry, biology, and material science. Time-resolved measurements and the influence of chemical reactions by coherent controls are also treated. A list of general textbooks and specialized literature is provided for further reading. With specific examples, definitions, and notes integrated within the text to aid understanding, this is suitable for undergraduates and graduates in physics and chemistry with a knowledge of atomic physics and familiar with the basics of quantum mechanics.

  2. Rapid Prototyping of Chemical Microsensors Based on Molecularly Imprinted Polymers Synthesized by Two-Photon Stereolithography.

    Science.gov (United States)

    Gomez, Laura Piedad Chia; Spangenberg, Arnaud; Ton, Xuan-Anh; Fuchs, Yannick; Bokeloh, Frank; Malval, Jean-Pierre; Tse Sum Bui, Bernadette; Thuau, Damien; Ayela, Cédric; Haupt, Karsten; Soppera, Olivier

    2016-07-01

    Two-photon stereolithography is used for rapid prototyping of submicrometre molecularly imprinted polymer-based 3D structures. The structures are evaluated as chemical sensing elements and their specific recognition properties for target molecules are confirmed. The 3D design capability is exploited and highlighted through the fabrication of an all-organic molecularly imprinted polymeric microelectromechanical sensor. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. A novel method for rapid in vitro radiobioassay

    Science.gov (United States)

    Crawford, Evan Bogert

    Rapid and accurate analysis of internal human exposure to radionuclides is essential to the effective triage and treatment of citizens who have possibly been exposed to radioactive materials in the environment. The two most likely scenarios in which a large number of citizens would be exposed are the detonation of a radiation dispersal device (RDD, "dirty bomb") or the accidental release of an isotope from an industrial source such as a radioisotopic thermal generator (RTG). In the event of the release and dispersion of radioactive materials into the environment in a large city, the entire population of the city -- including all commuting workers and tourists -- would have to be rapidly tested, both to satisfy the psychological needs of the citizens who were exposed to the mental trauma of a possible radiation dose, and to satisfy the immediate medical needs of those who received the highest doses and greatest levels of internal contamination -- those who would best benefit from rapid, intensive medical care. In this research a prototype rapid screening method to screen urine samples for the presence of up to five isotopes, both individually and in a mixture, has been developed. The isotopes used to develop this method are Co-60, Sr-90, Cs-137, Pu-238, and Am-241. This method avoids time-intensive chemical separations via the preparation and counting of a single sample on multiple detectors, and analyzing the spectra for isotope-specific markers. A rapid liquid-liquid separation using an organic extractive scintillator can be used to help quantify the activity of the alpha-emitting isotopes. The method provides quantifiable results in less than five minutes for the activity of beta/gamma-emitting isotopes when present in the sample at the intervention level as defined by the Centers for Disease Control and Prevention (CDC), and quantifiable results for the activity levels of alpha-emitting isotopes present at their respective intervention levels in approximately 30

  4. Rapid assessment methods in eye care: An overview

    Directory of Open Access Journals (Sweden)

    Srinivas Marmamula

    2012-01-01

    Full Text Available Reliable information is required for the planning and management of eye care services. While classical research methods provide reliable estimates, they are prohibitively expensive and resource intensive. Rapid assessment (RA methods are indispensable tools in situations where data are needed quickly and where time- or cost-related factors prohibit the use of classical epidemiological surveys. These methods have been developed and field tested, and can be applied across almost the entire gamut of health care. The 1990s witnessed the emergence of RA methods in eye care for cataract, onchocerciasis, and trachoma and, more recently, the main causes of avoidable blindness and visual impairment. The important features of RA methods include the use of local resources, simplified sampling methodology, and a simple examination protocol/data collection method that can be performed by locally available personnel. The analysis is quick and easy to interpret. The entire process is inexpensive, so the survey may be repeated once every 5-10 years to assess the changing trends in disease burden. RA survey methods are typically linked with an intervention. This article provides an overview of the RA methods commonly used in eye care, and emphasizes the selection of appropriate methods based on the local need and context.

  5. Direct anharmonic correction method by molecular dynamics

    Science.gov (United States)

    Liu, Zhong-Li; Li, Rui; Zhang, Xiu-Lu; Qu, Nuo; Cai, Ling-Cang

    2017-04-01

    The quick calculation of accurate anharmonic effects of lattice vibrations is crucial to the calculations of thermodynamic properties, the construction of the multi-phase diagram and equation of states of materials, and the theoretical designs of new materials. In this paper, we proposed a direct free energy interpolation (DFEI) method based on the temperature dependent phonon density of states (TD-PDOS) reduced from molecular dynamics simulations. Using the DFEI method, after anharmonic free energy corrections we reproduced the thermal expansion coefficients, the specific heat, the thermal pressure, the isothermal bulk modulus, and the Hugoniot P- V- T relationships of Cu easily and accurately. The extensive tests on other materials including metal, alloy, semiconductor and insulator also manifest that the DFEI method can easily uncover the rest anharmonicity that the quasi-harmonic approximation (QHA) omits. It is thus evidenced that the DFEI method is indeed a very efficient method used to conduct anharmonic effect corrections beyond QHA. More importantly it is much more straightforward and easier compared to previous anharmonic methods.

  6. Rapid Characterization of Molecular Chemistry, Nutrient Make-Up and Microlocation of Internal Seed Tissue

    Energy Technology Data Exchange (ETDEWEB)

    Yu,P.; Block, H.; Niu, Z.; Doiron, K.

    2007-01-01

    Wheat differs from corn in biodegradation kinetics and fermentation characteristics. Wheat exhibits a relatively high rate (23% h{sup 01}) and extent (78% DM) of biodegradation, which can lead to metabolic problems such as acidosis and bloat in ruminants. The objective of this study was to rapidly characterize the molecular chemistry of the internal structure of wheat (cv. AC Barrie) and reveal both its structural chemical make-up and nutrient component matrix by analyzing the intensity and spatial distribution of molecular functional groups within the intact seed using advanced synchrotron-powered Fourier transform infrared (FTIR) microspectroscopy. The experiment was performed at the U2B station of the National Synchrotron Light Source at Brookhaven National Laboratory, New York, USA. The wheat tissue was imaged systematically from the pericarp, seed coat, aleurone layer and endosperm under the peaks at {approx}1732 (carbonyl C{double_bond}O ester), 1515 (aromatic compound of lignin), 1650 (amide I), 1025 (non-structural CHO), 1550 (amide II), 1246 (cellulosic material), 1160, 1150, 1080, 930, 860 (all CHO), 3350 (OH and NH stretching), 2928 (CH{sub 2} stretching band) and 2885 cm{sup -1} (CH{sub 3} stretching band). Hierarchical cluster analysis and principal component analysis were applied to analyze the molecular FTIR spectra obtained from the different inherent structures within the intact wheat tissues. The results showed that, with synchrotron-powered FTIR microspectroscopy, images of the molecular chemistry of wheat could be generated at an ultra-spatial resolution. The features of aromatic lignin, structural and non-structural carbohydrates, as well as nutrient make-up and interactions in the seeds, could be revealed. Both principal component analysis and hierarchical cluster analysis methods are conclusive in showing that they can discriminate and classify the different inherent structures within the seed tissue. The wheat exhibited distinguishable

  7. A rapid DNA extraction method suitable for human papillomavirus detection.

    Science.gov (United States)

    Brestovac, Brian; Wong, Michelle E; Costantino, Paul S; Groth, David

    2014-04-01

    Infection with oncogenic human papillomavirus (HPV) genotypes is necessary for the development of cervical cancer. Testing for HPV DNA from liquid based cervical samples can be used as an adjunct to traditional cytological screening. In addition there are ongoing viral load, genotyping, and prevalence studies. Therefore, a sensitive DNA extraction method is needed to maximize the efficiency of HPV DNA detection. The XytXtract Tissue kit is a DNA extraction kit that is rapid and so could be useful for HPV testing, particularly in screening protocols. This study was undertaken to determine the suitability of this method for HPV detection. DNA extraction from HeLa and Caski cell lines containing HPV 18 and 16 respectively together with DNA from five liquid based cervical samples were used in a HPV PCR assay. DNA was also extracted using the QIAamp DNA mini kit (Qiagen, Hilden, Germany) as a comparison. DNA extracts were serially diluted and assayed. HPV DNA was successfully detected in cell lines and cervical samples using the XytXtract Tissue kit. In addition, the XytXtract method was found to be more sensitive than the QIAmp method as determined by a dilution series of the extracted DNA. While the XytXtract method is a closed, the QIAamp method uses a spin column with possible loss of DNA through DNA binding competition of the matrix, which could impact on the final extraction efficiency. The XytXtract is a cheap, rapid and efficient method for extracting HPV DNA from both cell lines and liquid based cervical samples. © 2014 Wiley Periodicals, Inc.

  8. Molecular interactions with many-body methods

    Science.gov (United States)

    Bartlett, R. J.

    1982-12-01

    Modern military technology has become highly dependent on a detailed knowledge of atom-molecule and molecule-molecule interactions. This type of information is required in diverse defense applications including chemical laser development, in the detection and modeling of plumes, and in the decomposition of energetic materials. The description of forces governing molecular reactions is provided by potential energy surfaces. These surfaces are the crucial first step in dynamics calculations that provide required information about state-to-state cross-sections and rate constants. Since potential energy surfaces are not generally available from experiment, the most reliable approach to their determination lies in the development and application of predictive ab initio quantum mechanical methods. The following annual report describes our research on the development of many-body perturbation theory (MBPT) and related infinite-order coupled-cluster (CC) methods for potential energy surfaces.

  9. Immersed molecular electrokinetic finite element method

    Science.gov (United States)

    Kopacz, Adrian M.; Liu, Wing K.

    2013-07-01

    A unique simulation technique has been developed capable of modeling electric field induced detection of biomolecules such as viruses, at room temperatures where thermal fluctuations must be considered. The proposed immersed molecular electrokinetic finite element method couples electrokinetics with fluctuating hydrodynamics to study the motion and deformation of flexible objects immersed in a suspending medium under an applied electric field. The force induced on an arbitrary object due to an electric field is calculated based on the continuum electromechanics and the Maxwell stress tensor. The thermal fluctuations are included in the Navier-Stokes fluid equations via the stochastic stress tensor. Dielectrophoretic and fluctuating forces acting on the particle are coupled through the fluid-structure interaction force calculated within the surrounding environment. This method was used to perform concentration and retention efficacy analysis of nanoscale biosensors using gold particles of various sizes. The analysis was also applied to a human papillomavirus.

  10. Molecular genetic methods for the diagnosis of fastidious microorganisms.

    Science.gov (United States)

    Fenollar, Florence; Raoult, Didier

    2004-01-01

    Technological innovations in the detection and identification of microorganisms using molecular techniques such as polymerase chain reaction (PCR) have ushered in a new era with respect to diagnostic microbiology. PCR using universal or specific primers followed by identification of amplified product, mainly by sequencing, has enabled the rapid identification of cultured or uncultured bacteria. Thus, PCR may allow quick diagnosis of infections caused by fastidious pathogens for which culture could be extremely difficult. However, several pitfalls, such as false positives, have been observed with PCR, underlining the necessity to interpret the results obtained with caution. At present, certain improvements in the molecular genetic methods may be helpful for the diagnosis of infectious diseases. Indeed, the recent development of bacterial genome sequencing has provided an important source of potential targets for PCR, allowing rational choice of primers for diagnosis and genotyping. In addition, the development of new techniques such as real-time PCR offers several advantages in comparison to conventional PCR, including speed, simplicity, reproducibility, quantitative capability and low risk of contamination. Herein, we review the general principles of PCR-based diagnosis and molecular genetic methods for the diagnosis of several hard-to-culture bacteria, such as Rickettsia spp., Ehrlichia spp., Coxiella burnetii, Bartonella spp., Tropheryma whipplei and Yersinia pestis.

  11. Radiometric method for the rapid detection of Leptospira organisms

    Energy Technology Data Exchange (ETDEWEB)

    Manca, N.; Verardi, R.; Colombrita, D.; Ravizzola, G.; Savoldi, E.; Turano, A.

    1986-02-01

    A rapid and sensitive radiometric method for detection of Leptospira interrogans serovar pomona and Leptospira interrogans serovar copenhageni is described. Stuart's medium and Middlebrook TB (12A) medium supplemented with bovine serum albumin, catalase, and casein hydrolysate and labeled with /sup 14/C-fatty acids were used. The radioactivity was measured in a BACTEC 460. With this system, Leptospira organisms were detected in human blood in 2 to 5 days, a notably shorter time period than that required for the majority of detection techniques.

  12. Method for rapidly determining a pulp kappa number using spectrophotometry

    Science.gov (United States)

    Chai, Xin-Sheng; Zhu, Jun Yong

    2002-01-01

    A system and method for rapidly determining the pulp kappa number through direct measurement of the potassium permanganate concentration in a pulp-permanganate solution using spectrophotometry. Specifically, the present invention uses strong acidification to carry out the pulp-permanganate oxidation reaction in the pulp-permanganate solution to prevent the precipitation of manganese dioxide (MnO.sub.2). Consequently, spectral interference from the precipitated MnO.sub.2 is eliminated and the oxidation reaction becomes dominant. The spectral intensity of the oxidation reaction is then analyzed to determine the pulp kappa number.

  13. Rapid coulometric method for the Kjeldahl determination of nitrogen.

    Science.gov (United States)

    Boström, C A; Cedergren, A; Johansson, G; Pettersson, I

    1974-11-01

    A rapid coulometric method for the Kjeldahl determination of nitrogen is described. The samples are digested by means of the Tecator AB digestion system which permits forty samples to be digested at the same time. The digestion products are diluted to 75 ml and 1 ml is coulometrically titrated in 1-2 min: 20-30 determinations can be performed per hour. For substances containing nitrogen in the per cent range the relative standard deviations for eight different substances were 0.1-1%.

  14. A Novel Rapid Method to Determine Cannabis Seed Germination Ability

    OpenAIRE

    吉澤, 政夫; 荒金, 眞佐子; 鈴木, 幸子; 北川, 重美; 中嶋, 順一; 森, 謙一郎; 荻野, 周三; Masao, Yoshizawa; Masako, Aragane; Yukiko, Suzuki; Shigemi, Kitagawa; Jun'ichi, Nakajima; Ken'ichiro, Mori; Shuzo, Ogino; 東京都健康安全研究センター薬用植物園

    2011-01-01

    A novel rapid method to determine cannabis seed germination ability was developed. Cannabis seeds were soaked in water for 15 minutes at 40℃, and germs were removed from the seeds by cracking the shell with tweezers. The germs were soaked in water for 15 minutes at 40℃, and the swollen skin was peeled off. The peeled germs were again soaked in water for 10 minutes at 40℃, and the angles between the seed leaves were measured. Cannabis seeds with angles of the seed leaves exceeding 30 degrees w...

  15. Click-Chemistry-Mediated Rapid Microbubble Capture for Acute Thrombus Ultrasound Molecular Imaging.

    Science.gov (United States)

    Wang, Tuantuan; Yuan, Chuxiao; Dai, Bingyang; Liu, Yang; Li, Mingxi; Feng, Zhenqiang; Jiang, Qing; Xu, Zhihong; Zhao, Ningwei; Gu, Ning; Yang, Fang

    2017-07-18

    Bioorthogonal coupling chemistry has been studied as a potentially advantageous approach for molecular imaging because it offers rapid, efficient, and strong binding, which might also benefit stability, production, and chemical conjugation. The inverse-electron-demand Diels-Alder reaction between a 1,2,4,5-tetrazine and trans-cyclooctene (TCO) is an example of a highly selective and rapid bioorthogonal coupling reaction that has been used successfully to prepare targeted molecular imaging probes. Here we report a fast, reliable, and highly sensitive approach, based on a two-step pretargeting bioorthogonal approach, to achieving activated-platelet-specific CD62p-targeted thrombus ultrasound molecular imaging. Tetrazine-modified microbubbles (tetra-MBs) could be uniquely and rapidly captured by subsequent click chemistry of thrombus tagged with a trans-cyclooctene-pretreated CD62p antibody. Moreover, such tetra-MBs showed great long-term stability under physiological conditions, thus offering the ability to monitor thrombus changes in real time. We demonstrated for the first time that a bioorthogonal targeting molecular ultrasound imaging strategy based on tetra-MBs could be a simple but powerful tool for rapid diagnosis of acute thrombosis. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Nanoscale tailor-made membranes for precise and rapid molecular sieve separation.

    Science.gov (United States)

    Wang, Jing; Zhu, Junyong; Zhang, Yatao; Liu, Jindun; Van der Bruggen, Bart

    2017-03-02

    The precise and rapid separation of different molecules from aqueous, organic solutions and gas mixtures is critical to many technologies in the context of resource-saving and sustainable development. The strength of membrane-based technologies is well recognized and they are extensively applied as cost-effective, highly efficient separation techniques. Currently, empirical-based approaches, lacking an accurate nanoscale control, are used to prepare the most advanced membranes. In contrast, nanoscale control renders the membrane molecular specificity (sub-2 nm) necessary for efficient and rapid molecular separation. Therefore, as a growing trend in membrane technology, the field of nanoscale tailor-made membranes is highlighted in this review. An in-depth analysis of the latest advances in tailor-made membranes for precise and rapid molecule sieving is given, along with an outlook to future perspectives of such membranes. Special attention is paid to the established processing strategies, as well as the application of molecular dynamics (MD) simulation in nanoporous membrane design. This review will provide useful guidelines for future research in the development of nanoscale tailor-made membranes with a precise and rapid molecular sieve separation property.

  17. A novel rapid and reproducible flow cytometric method for optimization of transfection efficiency in cells

    Science.gov (United States)

    Homann, Stefanie; Hofmann, Christian; Gorin, Aleksandr M.; Nguyen, Huy Cong Xuan; Huynh, Diana; Hamid, Phillip; Maithel, Neil; Yacoubian, Vahe; Mu, Wenli; Kossyvakis, Athanasios; Sen Roy, Shubhendu; Yang, Otto Orlean

    2017-01-01

    Transfection is one of the most frequently used techniques in molecular biology that is also applicable for gene therapy studies in humans. One of the biggest challenges to investigate the protein function and interaction in gene therapy studies is to have reliable monospecific detection reagents, particularly antibodies, for all human gene products. Thus, a reliable method that can optimize transfection efficiency based on not only expression of the target protein of interest but also the uptake of the nucleic acid plasmid, can be an important tool in molecular biology. Here, we present a simple, rapid and robust flow cytometric method that can be used as a tool to optimize transfection efficiency at the single cell level while overcoming limitations of prior established methods that quantify transfection efficiency. By using optimized ratios of transfection reagent and a nucleic acid (DNA or RNA) vector directly labeled with a fluorochrome, this method can be used as a tool to simultaneously quantify cellular toxicity of different transfection reagents, the amount of nucleic acid plasmid that cells have taken up during transfection as well as the amount of the encoded expressed protein. Finally, we demonstrate that this method is reproducible, can be standardized and can reliably and rapidly quantify transfection efficiency, reducing assay costs and increasing throughput while increasing data robustness. PMID:28863132

  18. RAPID AND EFFICIENT METHOD FOR ENVIRONMENTAL DNA EXTRACTION AND PURIFICATION FROM SOIL

    Directory of Open Access Journals (Sweden)

    J. Hamedi

    2016-06-01

    Full Text Available Large proportion of microbial population in the world is unculturable. Extraction of total DNA from soil is usually a crucial step considering to the difficulties of study the uncultivable microorganisms. Humic acid is considered as the main inhibitory agent in the environmental DNA studies. Here, we introduced a rapid and efficient method for DNA extraction and purification from soil. Yield of DNA extraction by the presented method was 130 ng/µl. Three conventional methods of DNA extraction including liquid nitrogen incursion, bead beating and sonication were performed as control methods. Yield of DNA extraction by these methods were 110, 90 and 50 ng/µl, respectively. A rapid and efficient one step DNA purification method was introduced instead of hazardous conventional phenol-chloroform methods. Humic acid removal percentage by the introduced method was 95.8 % that is comparable with 97 % gained by the conventional gel extraction method and yield of DNA after purification was 84 % and 73 %, respectively. This study could be useful in molecular ecology and metagenomics study as a fast and reliable method.

  19. RAPID SEPARATION METHOD FOR EMERGENCY WATER AND URINE SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S.; Culligan, B.

    2008-08-27

    The Savannah River Site Environmental Bioassay Lab participated in the 2008 NRIP Emergency Response program administered by the National Institute for Standards and Technology (NIST) in May, 2008. A new rapid column separation method was used for analysis of actinides and {sup 90}Sr the NRIP 2008 emergency water and urine samples. Significant method improvements were applied to reduce analytical times. As a result, much faster analysis times were achieved, less than 3 hours for determination of {sup 90}Sr and 3-4 hours for actinides. This represents a 25%-33% improvement in analysis times from NRIP 2007 and a {approx}100% improvement compared to NRIP 2006 report times. Column flow rates were increased by a factor of two, with no significant adverse impact on the method performance. Larger sample aliquots, shorter count times, faster cerium fluoride microprecipitation and streamlined calcium phosphate precipitation were also employed. Based on initial feedback from NIST, the SRS Environmental Bioassay Lab had the most rapid analysis times for actinides and {sup 90}Sr analyses for NRIP 2008 emergency urine samples. High levels of potential matrix interferences may be present in emergency samples and rugged methods are essential. Extremely high levels of {sup 210}Po were found to have an adverse effect on the uranium results for the NRIP-08 urine samples, while uranium results for NRIP-08 water samples were not affected. This problem, which was not observed for NRIP-06 or NRIP-07 urine samples, was resolved by using an enhanced {sup 210}Po removal step, which will be described.

  20. A rapid cloning method employing orthogonal end protection.

    Directory of Open Access Journals (Sweden)

    Arjen J Jakobi

    Full Text Available We describe a novel in vitro cloning strategy that combines standard tools in molecular biology with a basic protecting group concept to create a versatile framework for the rapid and seamless assembly of modular DNA building blocks into functional open reading frames. Analogous to chemical synthesis strategies, our assembly design yields idempotent composite synthons amenable to iterative and recursive split-and-pool reaction cycles. As an example, we illustrate the simplicity, versatility and efficiency of the approach by constructing an open reading frame composed of tandem arrays of a human fibronectin type III (FNIII domain and the von Willebrand Factor A2 domain (VWFA2, as well as chimeric (FNIII(n-VWFA2-(FNIII(n constructs. Although we primarily designed this strategy to accelerate assembly of repetitive constructs for single-molecule force spectroscopy, we anticipate that this approach is equally applicable to the reconstitution and modification of complex modular sequences including structural and functional analysis of multi-domain proteins, synthetic biology or the modular construction of episomal vectors.

  1. A method for rapid similarity analysis of RNA secondary structures

    Directory of Open Access Journals (Sweden)

    Liu Na

    2006-11-01

    Full Text Available Abstract Background Owing to the rapid expansion of RNA structure databases in recent years, efficient methods for structure comparison are in demand for function prediction and evolutionary analysis. Usually, the similarity of RNA secondary structures is evaluated based on tree models and dynamic programming algorithms. We present here a new method for the similarity analysis of RNA secondary structures. Results Three sets of real data have been used as input for the example applications. Set I includes the structures from 5S rRNAs. Set II includes the secondary structures from RNase P and RNase MRP. Set III includes the structures from 16S rRNAs. Reasonable phylogenetic trees are derived for these three sets of data by using our method. Moreover, our program runs faster as compared to some existing ones. Conclusion The famous Lempel-Ziv algorithm can efficiently extract the information on repeated patterns encoded in RNA secondary structures and makes our method an alternative to analyze the similarity of RNA secondary structures. This method will also be useful to researchers who are interested in evolutionary analysis.

  2. Rapid and effective DNA extraction method with bead grinding for a large amount of fungal DNA.

    Science.gov (United States)

    Watanabe, M; Lee, K; Goto, K; Kumagai, S; Sugita-Konishi, Y; Hara-Kudo, Y

    2010-06-01

    To identify a rapid method for extracting a large amount of DNA from fungi associated with food hygiene, extraction methods were compared using fungal pellets formed rapidly in liquid media. Combinations of physical and chemical methods or commercial kits were evaluated with 3 species of yeast, 10 species of ascomycetous molds, and 4 species of zygomycetous molds. Bead grinding was the physical method, followed by chemical methods involving sodium dodecyl sulfate (SDS), cetyl trimethyl ammonium bromide (CTAB), and benzyl chloride and two commercial kits. Quantity was calculated by UV absorbance at 260 nm, quality was determined by the ratio of UV absorbance at 260 and 280 nm, and gene amplifications and electrophoresis profiles of whole genomes were analyzed. Bead grinding with the SDS method was the most effective for DNA extraction for yeasts and ascomycetous molds, and bead grinding with the CTAB method was most effective with zygomycetous molds. For both groups of molds, bead grinding with the CTAB method was the best approach for DNA extraction. Because this combination also is relatively effective for yeasts, it can be used to extract a large amount of DNA from a wide range of fungi. The DNA extraction methods are useful for developing gene indexes to identify fungi with molecular techniques, such as DNA fingerprinting.

  3. A rapid and specific colorimetric method for free tryptophan quantification.

    Science.gov (United States)

    Wu, Yinan; Wang, Tianmin; Zhang, Chong; Xing, Xin-Hui

    2018-01-01

    Tryptophan is one of the eight essential amino acids and plays an important role in many biological processes. For its interaction with human health, environment and relevant commercial interest in biotechnology-based production, rapid and specific quantification method for this molecule accessible to common laboratories is badly needed. We herein reported a simple colorimetric method for free tryptophan quantification with 96-well-plate-level throughput. Our protocol firstly converted tryptophan to indole enzymatically by purified tryptophanases and then used reactivity of indole with hydroxylamine to form pink product with absorption peak at 530nm, enabling the quantification of tryptophan with simple spectrometry in just two hours. We presented that this method exhibited a linear detection range from 100μM to 600μM (R(2) = 0.9969) with no detection towards other naturally occurring tryptophan analogs or tryptophan residues in proteins. It was very robust in complicated biological samples, as demonstrated by quantifying the titer of 36 mutated tryptophan-producing strains with Pearson correlation coefficient of 0.93 in contrast to that measured by high performance liquid chromatography (HPLC). Our method should be potent for routine free tryptophan quantification in a high-throughput manner, facilitating studies in medicine, microbiology, food chemistry, metabolic engineering, etc. Copyright © 2017. Published by Elsevier B.V.

  4. Rapid identification of cytokinins by an immunological method

    Energy Technology Data Exchange (ETDEWEB)

    Morris, R.O.; Jameson, P.E.; Morris, J.W. (Univ. of Missouri-Columbia (USA)); Laloue, M. (Centre Nationale de la Recherche Scientifique, Gif-sur-Yvette (France))

    1991-04-01

    A method for rapid identification of bacterial cytokinins has been developed in which cultures are fed ({sup 3}H)adenine, the cytokinins (including, {sup 3}H-labeled cytokinins) are isolated by immunoaffinity chromatography, and analyzed by HPLC with on-line scintillation counting. Analysis of Agrobacterium tumefaciens strains showed that some produced primarily trans-zeatin, whereas others produced primarily trans-zeatin riboside. Pseudomonas syringae pv savastanoi produced mixtures of transzeatin, dihydrozeatin, 1{double prime}-methyl-trans-zeatin riboside, and other unknown cytokinin-like substances. Corynebacterium fascians, produced cis-zeatin, isopentenyladenine and isopentenyladenosine. The technique is designed for qualitative rather than quantitative studies and allows ready identification of bacterial cytokinins. It may also have utility in the study of plant cytokinins if adequate incorporation of label into cytokinin precursor pools can be achieved.

  5. A rapid protection switching method in carrier ethernet ring networks

    Science.gov (United States)

    Yuan, Liang; Ji, Meng

    2008-11-01

    Abstract: Ethernet is the most important Local Area Network (LAN) technology since more than 90% data traffic in access layer is carried on Ethernet. From 10M to 10G, the improving Ethernet technology can be not only used in LAN, but also a good choice for MAN even WAN. MAN are always constructed in ring topology because the ring network could provide resilient path protection by using less resource (fibre or cable) than other network topologies. In layer 2 data networks, spanning tree protocol (STP) is always used to protect transmit link and preventing the formation of logic loop in networks. However, STP cannot guarantee the efficiency of service convergence when link fault happened. In fact, convergent time of networks with STP is about several minutes. Though Rapid Spanning Tree Protocol (RSTP) and Multi-Spanning Tree Protocol (MSTP) improve the STP technology, they still need a couple of seconds to achieve convergence, and can not provide sub-50ms protection switching. This paper presents a novel rapid ring protection method (RRPM) for carrier Ethernet. Unlike other link-fault detection method, it adopts distributed algorithm to detect link fault rapidly (sub-50ms). When networks restore from link fault, it can revert to the original working state. RRPM can provide single ring protection and interconnected ring protection without the formation of super loop. In normal operation, the master node blocks the secondary port for all non-RRPM Ethernet frames belonging to the given RRPM Ring, thereby avoiding a loop in the ring. When link fault happens, the node on which the failure happens moves from the "ring normal" state to the "ring fault" state. It also sends "link down" frame immediately to other nodes and blocks broken port and flushes its forwarding database. Those who receive "link down" frame will flush forwarding database and master node should unblock its secondary port. When the failure restores, the whole ring will revert to the normal state. That is

  6. Molecular methods for the study of signal transduction in plants

    KAUST Repository

    Irving, Helen R.

    2013-09-03

    Novel and improved analytical methods have led to a rapid increase in our understanding of the molecular mechanism underlying plant signal transduction. Progress has been made both at the level of single-component analysis and in vivo imaging as well as at the systems level where transcriptomics and particularly phosphoproteomics afford a window into complex biological responses. Here we review the role of the cyclic nucleotides cAMP and cGMP in plant signal transduction as well as the discovery and biochemical and biological characterization of an increasing number of complex multi-domain nucleotide cyclases that catalyze the synthesis of cAMP and cGMP from ATP and GTP, respectively. © Springer Science+Business Media New York 2013.

  7. Molecular methods for the study of signal transduction in plants.

    Science.gov (United States)

    Irving, Helen R; Gehring, Chris

    2013-01-01

    Novel and improved analytical methods have led to a rapid increase in our understanding of the molecular mechanism underlying plant signal transduction. Progress has been made both at the level of single-component analysis and in vivo imaging as well as at the systems level where transcriptomics and particularly phosphoproteomics afford a window into complex biological responses. Here we review the role of the cyclic nucleotides cAMP and cGMP in plant signal transduction as well as the discovery and biochemical and biological characterization of an increasing number of complex multi-domain nucleotide cyclases that catalyze the synthesis of cAMP and cGMP from ATP and GTP, respectively.

  8. New rapid DNA extraction method with Chelex from Venturia inaequalis spores.

    Science.gov (United States)

    Turan, Ceren; Nanni, Irene Maja; Brunelli, Agostino; Collina, Marina

    2015-08-01

    The objective of this study was to develop a rapid method to isolate DNA from Venturia inaequalis spores for use in diagnostic DNA mutation analysis. Chelex-100 resin was evaluated and compared with a well established DNA exctraction method, utilizing CTAB in order to have a robust comparison. In this research we demonstrated that Chelex-100 efficiently makes extraction of the DNA from V. inaequalis spores available for direct use in molecular analyses. Also, the quantity and quality of extracted DNA were shown to be adequate for PCR analysis. Comparatively, the quality of DNA samples isolated using Chelex method was better than those extracted using CTAB. In conclusion, the Chelex method is recommended for PCR experiments considering its simplicity and cost-effectiveness. Copyright © 2015. Published by Elsevier B.V.

  9. Method for Rapid Protein Identification in a Large Database

    Directory of Open Access Journals (Sweden)

    Wenli Zhang

    2013-01-01

    Full Text Available Protein identification is an integral part of proteomics research. The available tools to identify proteins in tandem mass spectrometry experiments are not optimized to face current challenges in terms of identification scale and speed owing to the exponential growth of the protein database and the accelerated generation of mass spectrometry data, as well as the demand for nonspecific digestion and post-modifications in complex-sample identification. As a result, a rapid method is required to mitigate such complexity and computation challenges. This paper thus aims to present an open method to prevent enzyme and modification specificity on a large database. This paper designed and developed a distributed program to facilitate application to computer resources. With this optimization, nearly linear speedup and real-time support are achieved on a large database with nonspecific digestion, thus enabling testing with two classical large protein databases in a 20-blade cluster. This work aids in the discovery of more significant biological results, such as modification sites, and enables the identification of more complex samples, such as metaproteomics samples.

  10. Quantum state specific reactant preparation in a molecular beam by rapid adiabatic passage

    Energy Technology Data Exchange (ETDEWEB)

    Chadwick, Helen, E-mail: helen.chadwick@epfl.ch; Hundt, P. Morten; Reijzen, Maarten E. van; Yoder, Bruce L.; Beck, Rainer D. [Laboratoire de Chimie Physique Moléculaire, Ecole Polytechnique Fédérale de Lausanne, Lausanne (Switzerland)

    2014-01-21

    Highly efficient preparation of molecules in a specific rovibrationally excited state for gas/surface reactivity measurements is achieved in a molecular beam using tunable infrared (IR) radiation from a single mode continuous wave optical parametric oscillator (cw-OPO). We demonstrate that with appropriate focusing of the IR radiation, molecules in the molecular beam crossing the fixed frequency IR field experience a Doppler tuning that can be adjusted to achieve complete population inversion of a two-level system by rapid adiabatic passage (RAP). A room temperature pyroelectric detector is used to monitor the excited fraction in the molecular beam and the population inversion is detected and quantified using IR bleaching by a second IR-OPO. The second OPO is also used for complete population transfer to an overtone or combination vibration via double resonance excitation using two spatially separated RAP processes.

  11. Multidrug-resistant tuberculosis: Rapid molecular detection with MTBDRplus® assay in clinical samples

    Directory of Open Access Journals (Sweden)

    Rita Macedo

    2009-05-01

    Full Text Available Nowadays, the greatest concern of tuberculosis control programmes is the appearance of multidrug-resistant tuberculosis and extensively drug-resistant tuberculosis. Rapid determination of drug resistance in clinical samples, with Mycobacterium tuberculosis complex (MTC, is the prerequisite for initiating effective chemotherapy, ensuring successful treatment of the patient and preventing further spread of drugresistant isolates.The aim of our study was to determine the sensitivity of the new MTBDRplus® assay in comparison to culture, identification and classic DST, directly from smear-positive clinical specimens.A total of 68 smear-positive sputum specimens were processed by both the classical mycobacteriological methods and the molecular assay, MTBDRplus®.MTBDRplus® assay allowed an accurate identification of MTC species by detection of the specific band in all samples, from which we also isolated and identified MTC strains by culture methods. In the samples from which we isolated susceptible strains (63.2%, wild type patterns were found using MTBDRplus® assay. The samples from which we isolated resistant strains (36.8% showed specific mutations associated with the correspondent resistant phenotype.Our study indicated that this assay allows rapid detection of resistance, always in agreement with classic methods. Resumo: Uma das principais problematicas no controlo da tuberculose e o aparecimento de casos de tuberculose multirresistente (TB-MR e tuberculose extensivamente resistente (TB-XDR. A deteccao precoce da resistencia a farmacos, directamente a partir de amostras respiratorias, e essencial para que se assegure o tratamento atempado, adequado e eficaz da tuberculose, bem como para prevenir a disseminacao destes casos de especial gravidade.O nosso objectivo foi avaliar a sensibilidade e comparar os resultados obtidos com um metodo de genetica molecular disponivel comercialmente – MTBDRplus® – e o isolamento

  12. Ligand Replacement Approach to Raman-Responded Molecularly Imprinted Monolayer for Rapid Determination of Penicilloic Acid in Penicillin.

    Science.gov (United States)

    Zhang, Liying; Jin, Yang; Huang, Xiaoyan; Zhou, Yujie; Du, Shuhu; Zhang, Zhongping

    2015-12-01

    Penicilloic acid (PA) is a degraded byproduct of penicillin and often causes fatal allergies to humans, but its rapid detection in penicillin drugs remains a challenge due to its similarity to the mother structure of penicillin. Here, we reported a ligand-replaced molecularly imprinted monolayer strategy on a surface-enhanced Raman scattering (SERS) substrate for the specific recognition and rapid detection of Raman-inactive PA in penicillin. The bis(phenylenediamine)-Cu(2+)-PA complex was first synthesized and stabilized onto the surface of silver nanoparticle film that was fabricated by a bromide ion-added silver mirror reaction. A molecularly imprinted monolayer was formed by the further modification of alkanethiol around the stabilized complex on the Ag film substrate, and the imprinted recognition site was then created by the replacement of the complex template with Raman-active probe molecule p-aminothiophenol. When PA rebound into the imprinted site in the alkanethiol monolayer, the SERS signal of p-aminothiophenol exhibited remarkable enhancement with a detection limit of 0.10 nM. The imprinted monolayer can efficiently exclude the interference of penicillin and thus provides a selective determination of 0.10‰ (w/w) PA in penicillin, which is about 1 order of magnitude lower than the prescribed residual amount of 1.0‰. The strategy reported here is simple, rapid and inexpensive compared to the traditional chromatography-based methods.

  13. Molecular detection methods of resistance to antituberculosis drugs in Mycobacterium tuberculosis.

    Science.gov (United States)

    Brossier, F; Sougakoff, W

    2017-09-01

    Molecular methods predict drug resistance several weeks before phenotypic methods and enable rapid implementation of appropriate therapeutic treatment. We aimed to detail the most representative molecular tools used in routine practice for the rapid detection of resistance to antituberculosis drugs among Mycobacterium tuberculosis strains. The molecular diagnosis of resistance to antituberculosis drugs in clinical samples or from in vitro cultures is based on the detection of the most common mutations in the genes involved in the development of resistance in M. tuberculosis strains (encoding either protein targets of antibiotics, or antibiotic activating enzymes) by commercial molecular kits or by sequencing. Three hypotheses could explain the discrepancies between the genotypic results and the phenotypic drug susceptibility testing results: a low percentage of resistant mutants precluding the detection by genotypic methods on the primary culture; a low level of resistance not detected by phenotypic testing; and other resistance mechanisms not yet characterized. Molecular methods have varying sensitivity with regards to detecting antituberculosis drug resistance; that is why phenotypic susceptibility testing methods are mandatory for detecting antituberculosis drug-resistant isolates that have not been detected by molecular methods. The questionable ability of existing phenotypic and genotypic drug susceptibility testing to properly classify strains as susceptible or resistant, and at what level of resistance, was raised for several antituberculosis agents. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  14. New and rapid procedure for the isolation of ultra-high molecular weight eukaryotic DNA

    Energy Technology Data Exchange (ETDEWEB)

    Longmire, J.L.; Lewis, A.; Meincke, L.J.; Hildebrand, C.E.

    1986-05-01

    The authors have developed a novel procedure that permits the rapid extraction and isolation of ultra-high molecular weight DNA from avian or mammalian cells using dialysis against a solution of polyethylene glycol (PEG). Cells harvested by centrifugation and washed twice in ice-cold Ca/sup + +/- and Mg/sup + +/-free phosphate buffered saline were resuspended in 5 ml 0.01 M Tris-Cl (pH 8.0); 0.001 M EDTA (TE); sodium dodecyl sulfate and proteinase K were added to final concentrations of 0.1% and 0.1 mg/ml, respectively. After incubation at 37/sup 0/C overnight, the viscous solution was transferred to a mini-collodian bag and concentrated by dialysis against 4-5 changes of 20% PEG in TE over a period of 5 hours at RT. Concentrated samples were desalted by dialysis against fresh TE for two 15 minute intervals. DNA obtained using this procedure gives A/sub 260//A/sub 280/ consistently >1.8. Analysis of DNA size using pulsed field gel electrophoresis revealed a distribution of fragments >500 Kb in length. Further measurements examined were (1) restriction enzyme digestibility, (2) ligation efficiency of restricted DNA, and (3) cloning efficiency using the lambda vector Ch21A. This novel methodology offers a valuable alternative protocol for rapid purification of ultrahigh molecular weight DNA for various applications in molecular biology.

  15. Rapid intrinsic fluorescence method for direct identification of pathogens in blood cultures.

    Science.gov (United States)

    Walsh, John D; Hyman, Jay M; Borzhemskaya, Larisa; Bowen, Ann; McKellar, Caroline; Ullery, Michael; Mathias, Erin; Ronsick, Christopher; Link, John; Wilson, Mark; Clay, Bradford; Robinson, Ron; Thorpe, Thurman; van Belkum, Alex; Dunne, W Michael

    2013-11-19

    A positive blood culture is a critical result that requires prompt identification of the causative agent. This article describes a simple method to identify microorganisms from positive blood culture broth within the time taken to perform a Gram stain (identification of the etiologic agent may benefit the clinical management of sepsis. Further evaluation is now warranted to determine the performance of the method using clinical blood culture specimens. Physicians often require the identity of the infective agent in order to make life-saving adjustments to empirical therapy or to switch to less expensive and/or more targeted antimicrobials. However, standard identification procedures take up to 2 days after a blood culture is signaled positive, and even most rapid molecular techniques take several hours to provide a result. Other techniques are faster (e.g., matrix-assisted laser desorption ionization-time of flight [MALDI-TOF] mass spectrometry) but require time-consuming manual processing steps and expensive equipment. There remains a clear need for a simple, inexpensive method to rapidly identify microorganisms directly from positive blood cultures. The promising new method described in this research article can identify microorganisms in minutes by optical spectroscopy, thus permitting the lab to simultaneously report the presence of a positive blood culture and the organism's identity.

  16. RAPID TEST METHOD FOR EVALUATION OF ANTIFREEZE ADDITIVE EFFICIENCY

    Directory of Open Access Journals (Sweden)

    S. V. Gushchin

    2015-01-01

    Full Text Available Usage of chemical additives while executing concrete works at negative temperatures is considered as a convenient and economical method. Range of the used antifreeze additives is rather wide. A great number of new additives are advertised but their characteristics have not been practically studied. Evaluation of the antifreeze additive efficiency is unfortunately rather long process and it does not provide comprehensive data on concrete structure formation processes. Due to this development of rapid and comprehensive methodology for construction companies is urgently required.Freezing processes of antifreeze additive aqueous solutions and hardening of cement paste with them have been investigated in the paper. The paper proposes a methodology for determination of freezing point for aqueous solutions of chemical additives of various applications. Identity of  freezing point for a chemical additive aqueous solution and cement paste with an equal concentration of the additive in the paste pore fluid has been determined while taking  calcium nitrate and sodium formate additives as an example. The paper demonstrates the possibility to evaluate efficiency of antifreeze additive action on the basis of kinetics in temperature changes of the cement paste with additives by its consecutive freezing and defrosting.  A methodology for operational evaluation in the field of chemical additive application for concreting items at negative temperatures has been offered in the paper.  The methodology does not require  deficient and expensive test-equipment. It can be applied at ordinary construction companies and it is comprehensible for personnel of low-qualification.  The paper shows the possibility to develop an original methodology for designing concrete structure which is based on operating efficiency determinations  for single and integrated antifreeze additives.

  17. A method for rapidly screening functionality of actin mutants and tagged actins

    Directory of Open Access Journals (Sweden)

    Rommelaere Heidi

    2004-01-01

    Full Text Available Recombinant production and biochemical analysis of actin mutants has been hampered by the fact that actin has an absolute requirement for the eukaryotic chaperone CCT to reach its native state. We therefore have developed a method to rapidly screen the folding capacity and functionality of actin variants, by combining in vitro expression of labelled actin with analysis on native gels, band shift assays or copolymerization tests. Additionally, we monitor, using immuno-fluorescence, incorporation of actin variants in cytoskeletal structures in transfected cells. We illustrate the method by two examples. In one we show that tagged versions of actin do not always behave native-like and in the other we study some of the molecular defects of three &bgr;-actin mutants that have been associated with diseases.

  18. A rapid and efficient DNA extraction method suitable for marine macroalgae.

    Science.gov (United States)

    Ramakrishnan, Gautham Subramaniam; Fathima, Anwar Aliya; Ramya, Mohandass

    2017-12-01

    Macroalgae are a diverse group of organisms. Marine macroalgae, in particular, have numerous medicinal and industrial applications. Molecular studies of macroalgae require suitable concentrations of DNA free of contaminants. At present, numerous protocols exist for DNA extraction from macroalgae. However, they are either time consuming, expensive or work only with few species. The method described in this study is rapid and efficient and applicable to different types of marine macroalgae. This method yields an average of 3.85 µg of DNA per 50 mg of algal tissue, with an average purity of 1.88. The isolated DNA was suitable for PCR amplification of universal plastid region of macroalgae.

  19. A new rapid method for rockfall energies and distances estimation

    Science.gov (United States)

    Giacomini, Anna; Ferrari, Federica; Thoeni, Klaus; Lambert, Cedric

    2016-04-01

    and distances at the base to block and slope features. The validation of the proposed approach was conducted by comparing predictions to experimental data collected in the field and gathered from the scientific literature. The method can be used for both natural and constructed slopes and easily extended to more complicated and articulated slope geometries. The study shows its great potential for a quick qualitative hazard assessment providing indication about impact energy and horizontal distance of the first impact at the base of a rock cliff. Nevertheless, its application cannot substitute a more detailed quantitative analysis required for site-specific design of mitigation measures. Acknowledgements The authors gratefully acknowledge the financial support of the Australian Coal Association Research Program (ACARP). References Dorren, L.K.A. (2003) A review of rockfall mechanics and modelling approaches, Progress in Physical Geography 27(1), 69-87. Agliardi, F., Crosta, G.B., Frattini, P. (2009) Integrating rockfall risk assessment and countermeasure design by 3D modelling techniques. Natural Hazards and Earth System Sciences 9(4), 1059-1073. Ferrari, F., Thoeni, K., Giacomini, A., Lambert, C. (2016) A rapid approach to estimate the rockfall energies and distances at the base of rock cliffs. Georisk, DOI: 10.1080/17499518.2016.1139729.

  20. Rapid Methods for detection of Veterinary Drug residues in Meat

    Directory of Open Access Journals (Sweden)

    Chandan

    2010-10-01

    methodologies, the variety of residues to search per sample and the need to invest on powerful new instruments for identification and confirmatory purposes. Rapid and versatile screening methodologies make its control easier and reduce the number of non-compliant samples to be confirmed through tedious and costly confirmatory analytical methodologies. For instance, the multiresidue analysis can be performed better by using fast LC methods. Thus, the availability of new screening methodologies and the improvement of the existing ones will contribute to a better safety assurance of meat and other foods of animal origin. [Vet. World 2010; 3(5.000: 241-246

  1. Rapid detection of carbapenemase production in Enterobacteriaceae using a modified paper strip Carba NP method.

    Science.gov (United States)

    Ho, Pak-Leung; Wang, Ya; Tse, Cindy Wing-Sze; Fung, Kitty Sau-Chun; Cheng, Vincent Ch-Chung; Lee, Rodney; To, Wing-Kin; Lai, Raymond Wai-Man; Luk, Wei-Kwang; Que, Tak-Lun; Tsang, Dominic Ngai-Chong

    2017-10-25

    Rapid and accurate detection of carbapenemase-producing Enterobacteriaceae (CPE) is important for preventing their spread in healthcare settings. We compared the performance of the Carba NP test using the CLSI tube method with that using a modified paper strip method for detection of carbapenemase in 390 Enterobacteriaceae isolates. The isolates were identified by Hong Kong's carbapenem-resistant Enterobacteriaceae surveillance program in 2016 and comprised 213 CPE and 177 carbapenemase-negative Enterobacteriaceae Molecular genotype was used as the reference. Test results were read at different time points for the CLSI method (1 min, 5 min, 1 h and 2 h) and strip method (1 min, 5 min). The strip CNP and CLSI CNP tests correctly detect carbapenemase production in 93% and 93% KPC producers, 100% and 38% IMI producers, 94% and 85% IMP producers, 98% and 90% NDM producers, and, 29% and 12% OXA producers, respectively. Overall, the strip method has superior sensitivity than the CLSI method (86% vs. 75%, respectively, P NP test using the modified strip method has a higher sensitivity and a shorter assay time than using the CLSI tube method. Copyright © 2017 American Society for Microbiology.

  2. Rapid microbial mineralization of toluene and 1,3-dimethylbenzene in the absence of molecular oxygen.

    Science.gov (United States)

    Zeyer, J; Kuhn, E P; Schwarzenbach, R P

    1986-10-01

    Up to 0.4 mM 1,3-dimethylbenzene (m-xylene) was rapidly mineralized in a laboratory aquifer column operated in the absence of molecular oxygen with nitrate as an electron acceptor. Under continuous flow conditions, the degradation rate constant (pseudo-first order) was >0.45 h. Based on a carbon mass balance with [ring-C]m-xylene and a calculation of the electron balance, m-xylene was shown to be quantitatively (80%) oxidized to CO(2) with a concomitant reduction of nitrate. The mineralization of m-xylene in the column also took place after reducing the redox potential, E', of the inflowing medium with sulfide to sediments, sludge digestors, and groundwater infiltration zones from landfills and polluted rivers are not necessarily persistent but may be mineralized in the absence of molecular oxygen.

  3. Nanoscale molecularly imprinted polymers and method thereof

    Science.gov (United States)

    Hart, Bradley R [Brentwood, CA; Talley, Chad E [Brentwood, CA

    2008-06-10

    Nanoscale molecularly imprinted polymers (MIP) having polymer features wherein the size, shape and position are predetermined can be fabricated using an xy piezo stage mounted on an inverted microscope and a laser. Using an AMF controller, a solution containing polymer precursors and a photo initiator are positioned on the xy piezo and hit with a laser beam. The thickness of the polymeric features can be varied from a few nanometers to over a micron.

  4. Rapid method for identification of transgenic fish zygosity

    Directory of Open Access Journals (Sweden)

    . Alimuddin

    2007-07-01

    Full Text Available Identification of zygosity in transgenik fish is normally achieved by PCR analysis with genomic DNA template extracted from the tissue of progenies which are derived by mating the transgenic fish and wild-type counterpart.  This method needs relatively large amounts of fish material and is time- and labor-intensive. New approaches addressing this problem could be of great help for fish biotechnologists.  In this experiment, we applied a quantitative real-time PCR (qr-PCR method to analyze zygosity in a stable line of transgenic zebrafish (Danio rerio carrying masu salmon, Oncorhynchus masou D6-desaturase-like gene. The qr-PCR was performed using iQ SYBR Green Supermix in the iCycler iQ Real-time PCR Detection System (Bio-Rad Laboratories, USA.  Data were analyzed using the comparative cycle threshold method.  The results demonstrated a clear-cut identification of all transgenic fish (n=20 classified as a homozygous or heterozygous.  Mating of those fish with wild-type had revealed transgene transmission to the offspring following expected Mendelian laws. Thus, we found that the qTR-PCR to be effective for a rapid and precise determination of zygosity in transgenic fish. This technique could be useful in the establishment of breeding programs for mass transgenic fish production and in experiments in which zygosity effect could have a functional impact. Keywords: quantitative real-time PCR; zygosity; transgenic fish; mass production   ABSTRAK Identifikasi sigositas ikan transgenik biasanya dilakukan menggunakan analisa PCR dengan cetakan DNA genomik yang diekstraksi dari jaringan ikan hasil persilangan antara ikan transgenik dan ikan normal.   Metode ini memerlukan ikan dalam jumlah yang banyak, dan juga waktu serta tenaga.  Pendekatan baru untuk mengatasi masalah tersebut akan memberikan manfaat besar kepada peneliti bioteknologi perikanan.  Pada penelitian ini, kami menggunakan metode PCR real-time kuantitatif (krt-PCR untuk

  5. Molecular Procedure for Rapid Detection of Burkholderia mallei and Burkholderia pseudomallei

    OpenAIRE

    Bauernfeind, Adolf; Roller, Carsten; Meyer, Detlef; Jungwirth, Renate; Schneider, Ines

    1998-01-01

    A PCR procedure for the discrimination of Burkholderia mallei and Burkholderia pseudomallei was developed. It is based on the nucleotide difference T 2143 C (T versus C at position 2143) between B. mallei and B. pseudomallei detected in the 23S rDNA sequences. In comparison with conventional methods the procedure allows more rapid identification at reduced risk for infection of laboratory personnel.

  6. A novel molecular toolkit for rapid detection of the pathogen and primary vector of thousand cankers disease.

    Directory of Open Access Journals (Sweden)

    Emel Oren

    Full Text Available Thousand Cankers Disease (TCD of Juglans and Pterocarya (Juglandaceae involves a fungal pathogen, Geosmithia morbida, and a primary insect vector, Pityophthorus juglandis. TCD was described originally from dying Juglans nigra trees in the western United States (USA, but it was reported subsequently from the eastern USA and northern Italy. The disease is often difficult to diagnose due to the absence of symptoms or signs on the bark surface of the host. Furthermore, disease symptoms can be confused with those caused by other biotic and abiotic agents. Thus, there is a critical need for a method for rapid detection of the pathogen and vector of TCD. Using species-specific microsatellite DNA markers, we developed a molecular protocol for the detection of G. morbida and P. juglandis. To demonstrate the utility of the method for delineating TCD quarantine zones, we tested whether geographical occurrence of symptoms and signs of TCD was correlated with molecular evidence for the presence of the cryptic TCD organisms. A total of 1600 drill cores were taken from branch sections collected from three regions (n = 40 trees for each location: California-J. hindsii (heavy disease incidence; Tennessee-J. nigra (mild disease incidence; and outside the known TCD zone (Missouri-J. nigra, no record of the disease. California samples had the highest incidence of the TCD organisms (85%, 34/40. Tennessee had intermediate incidence (42.5%, 17/40, whereas neither organism was detected in samples from Missouri. The low cost molecular protocol developed here has a high degree of sensitivity and specificity, and it significantly reduces sample-processing time, making the protocol a powerful tool for rapid detection of TCD.

  7. Fabrication of Polymerase Chain Reaction Plastic Lab-on-a-Chip Device for Rapid Molecular Diagnoses.

    Science.gov (United States)

    Trinh, Kieu The Loan; Zhang, Hainan; Kang, Dong-Jin; Kahng, Sung-Hyun; Tall, Ben D; Lee, Nae Yoon

    2016-05-01

    We aim to fabricate a thermoplastic poly(methylmethacrylate) (PMMA) Lab-on-a-Chip device to perform continuous- flow polymerase chain reactions (PCRs) for rapid molecular detection of foodborne pathogen bacteria. A miniaturized plastic device was fabricated by utilizing PMMA substrates mediated by poly(dimethylsiloxane) interfacial coating, enabling bonding under mild conditions, and thus avoiding the deformation or collapse of microchannels. Surface characterizations were carried out and bond strength was measured. The feasibility of the Lab-on-a-Chip device for performing on-chip PCR utilizing a lab-made, portable dual heater was evaluated. The results were compared with those obtained using a commercially available thermal cycler. A PMMA Lab-on-a-Chip device was designed and fabricated for conducting PCR using foodborne pathogens as sample targets. A robust bond was established between the PMMA substrates, which is essential for performing miniaturized PCR on plastic. The feasibility of on-chip PCR was evaluated using Escherichia coli O157:H7 and Cronobacter condimenti, two worldwide foodborne pathogens, and the target amplicons were successfully amplified within 25 minutes. In this study, we present a novel design of a low-cost and high-throughput thermoplastic PMMA Lab-on-a-Chip device for conducting microscale PCR, and we enable rapid molecular diagnoses of two important foodborne pathogens in minute resolution using this device. In this regard, the introduced highly portable system design has the potential to enable PCR investigations of many diseases quickly and accurately.

  8. MDMS: Molecular dynamics meta-simulator for evaluating exchange type sampling methods

    Science.gov (United States)

    Smith, Daniel B.; Okur, Asim; Brooks, Bernard R.

    2012-08-01

    Replica exchange methods have become popular tools to explore conformational space for small proteins. For larger biological systems, even with enhanced sampling methods, exploring the free energy landscape remains computationally challenging. This problem has led to the development of many improved replica exchange methods. Unfortunately, testing these methods remains expensive. We propose a molecular dynamics meta-simulator (MDMS) based on transition state theory to simulate a replica exchange simulation, eliminating the need to run explicit dynamics between exchange attempts. MDMS simulations allow for rapid testing of new replica exchange based methods, greatly reducing the amount of time needed for new method development.

  9. Rapid Radiochemical Method for Americium-241 in Building ...

    Science.gov (United States)

    Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Americium-241 in building materials Method Selected for: SAM lists this method for qualitative analysis of americium-241 in concrete or brick building materials. Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

  10. Rapid Radiochemical Method for Radium-226 in Building ...

    Science.gov (United States)

    Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Radium-226 in building materials Method Selected for: SAM lists this method for qualitative analysis of radium-226 in concrete or brick building materials Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

  11. A new method for rapid determination of carbohydrate and total carbon concentrations using UV spectrophotometry.

    Science.gov (United States)

    Albalasmeh, Ammar A; Berhe, Asmeret Asefaw; Ghezzehei, Teamrat A

    2013-09-12

    A new UV spectrophotometry based method for determining the concentration and carbon content of carbohydrate solution was developed. This method depends on the inherent UV absorption potential of hydrolysis byproducts of carbohydrates formed by reaction with concentrated sulfuric acid (furfural derivatives). The proposed method is a major improvement over the widely used Phenol-Sulfuric Acid method developed by DuBois, Gilles, Hamilton, Rebers, and Smith (1956). In the old method, furfural is allowed to develop color by reaction with phenol and its concentration is detected by visible light absorption. Here we present a method that eliminates the coloration step and avoids the health and environmental hazards associated with phenol use. In addition, avoidance of this step was shown to improve measurement accuracy while significantly reducing waiting time prior to light absorption reading. The carbohydrates for which concentrations and carbon content can be reliably estimated with this new rapid Sulfuric Acid-UV technique include: monosaccharides, disaccharides and polysaccharides with very high molecular weight. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Rapid, reliable, and reproducible molecular sub-grouping of clinical medulloblastoma samples.

    Science.gov (United States)

    Northcott, Paul A; Shih, David J H; Remke, Marc; Cho, Yoon-Jae; Kool, Marcel; Hawkins, Cynthia; Eberhart, Charles G; Dubuc, Adrian; Guettouche, Toumy; Cardentey, Yoslayma; Bouffet, Eric; Pomeroy, Scott L; Marra, Marco; Malkin, David; Rutka, James T; Korshunov, Andrey; Pfister, Stefan; Taylor, Michael D

    2012-04-01

    The diagnosis of medulloblastoma likely encompasses several distinct entities, with recent evidence for the existence of at least four unique molecular subgroups that exhibit distinct genetic, transcriptional, demographic, and clinical features. Assignment of molecular subgroup through routine profiling of high-quality RNA on expression microarrays is likely impractical in the clinical setting. The planning and execution of medulloblastoma clinical trials that stratify by subgroup, or which are targeted to a specific subgroup requires technologies that can be economically, rapidly, reliably, and reproducibly applied to formalin-fixed paraffin embedded (FFPE) specimens. In the current study, we have developed an assay that accurately measures the expression level of 22 medulloblastoma subgroup-specific signature genes (CodeSet) using nanoString nCounter Technology. Comparison of the nanoString assay with Affymetrix expression array data on a training series of 101 medulloblastomas of known subgroup demonstrated a high concordance (Pearson correlation r = 0.86). The assay was validated on a second set of 130 non-overlapping medulloblastomas of known subgroup, correctly assigning 98% (127/130) of tumors to the appropriate subgroup. Reproducibility was demonstrated by repeating the assay in three independent laboratories in Canada, the United States, and Switzerland. Finally, the nanoString assay could confidently predict subgroup in 88% of recent FFPE cases, of which 100% had accurate subgroup assignment. We present an assay based on nanoString technology that is capable of rapidly, reliably, and reproducibly assigning clinical FFPE medulloblastoma samples to their molecular subgroup, and which is highly suited for future medulloblastoma clinical trials.

  13. Rapid Molecular Detection of Multidrug-Resistant Tuberculosis by PCR-Nucleic Acid Lateral Flow Immunoassay

    Science.gov (United States)

    Kamphee, Hatairat; Chaiprasert, Angkana; Prammananan, Therdsak; Wiriyachaiporn, Natpapas; Kanchanatavee, Airin; Dharakul, Tararaj

    2015-01-01

    Several existing molecular tests for multidrug-resistant tuberculosis (MDR-TB) are limited by complexity and cost, hindering their widespread application. The objective of this proof of concept study was to develop a simple Nucleic Acid Lateral Flow (NALF) immunoassay as a potential diagnostic alternative, to complement conventional PCR, for the rapid molecular detection of MDR-TB. The NALF device was designed using antibodies for the indirect detection of labeled PCR amplification products. Multiplex PCR was optimized to permit the simultaneous detection of the drug resistant determining mutations in the 81-bp hot spot region of the rpoB gene (rifampicin resistance), while semi-nested PCR was optimized for the S315T mutation detection in the katG gene (isoniazid resistance). The amplification process additionally targeted a conserved region of the genes as Mycobacterium tuberculosis (Mtb) DNA control. The optimized conditions were validated with the H37Rv wild-type (WT) Mtb isolate and Mtb isolates with known mutations (MT) within the rpoB and katG genes. Results indicate the correct identification of WT (drug susceptible) and MT (drug resistant) Mtb isolates, with the least limit of detection (LOD) being 104 genomic copies per PCR reaction. NALF is a simple, rapid and low-cost device suitable for low resource settings where conventional PCR is already employed on a regular basis. Moreover, the use of antibody-based NALF to target primer-labels, without the requirement for DNA hybridization, renders the device generic, which could easily be adapted for the molecular diagnosis of other infectious and non-infectious diseases requiring nucleic acid detection. PMID:26355296

  14. Rapid Molecular Detection of Multidrug-Resistant Tuberculosis by PCR-Nucleic Acid Lateral Flow Immunoassay.

    Directory of Open Access Journals (Sweden)

    Hatairat Kamphee

    Full Text Available Several existing molecular tests for multidrug-resistant tuberculosis (MDR-TB are limited by complexity and cost, hindering their widespread application. The objective of this proof of concept study was to develop a simple Nucleic Acid Lateral Flow (NALF immunoassay as a potential diagnostic alternative, to complement conventional PCR, for the rapid molecular detection of MDR-TB. The NALF device was designed using antibodies for the indirect detection of labeled PCR amplification products. Multiplex PCR was optimized to permit the simultaneous detection of the drug resistant determining mutations in the 81-bp hot spot region of the rpoB gene (rifampicin resistance, while semi-nested PCR was optimized for the S315T mutation detection in the katG gene (isoniazid resistance. The amplification process additionally targeted a conserved region of the genes as Mycobacterium tuberculosis (Mtb DNA control. The optimized conditions were validated with the H37Rv wild-type (WT Mtb isolate and Mtb isolates with known mutations (MT within the rpoB and katG genes. Results indicate the correct identification of WT (drug susceptible and MT (drug resistant Mtb isolates, with the least limit of detection (LOD being 104 genomic copies per PCR reaction. NALF is a simple, rapid and low-cost device suitable for low resource settings where conventional PCR is already employed on a regular basis. Moreover, the use of antibody-based NALF to target primer-labels, without the requirement for DNA hybridization, renders the device generic, which could easily be adapted for the molecular diagnosis of other infectious and non-infectious diseases requiring nucleic acid detection.

  15. Rapid and reliable determination of p-nitroaniline in wastewater by molecularly imprinted fluorescent polymeric ionic liquid microspheres.

    Science.gov (United States)

    Lu, Xing; Yang, Yiwen; Zeng, Yanbo; Li, Lei; Wu, Xiaohua

    2018-01-15

    Rapid and efficient detecting trace amount of environmental p-nitroaniline (p-NA) is in urgent need for security concerns and pollution supervision. In this work we report the use of molecularly imprinted polymeric ionic liquid (MIPIL) microspheres to construct recognizable surfaces for detection of p-NA through fluorescence quenching. The p-NA imprinted microspheres are synthesized by precipitation polymerization upon co-polymerization of 3-(anthracen-9-ylmethyl)-1-vinyl-1H-imidazol-3-ium chloride (Fluorescent IL monomer) with ethyleneglycol dimethacrylate (EGDMA). The electron-rich group alkenyl imidazole in IL functional monomer can dramatically improve the emission of anthracene fluorophore and the π-π stacking, electronic, and hydrogen bond between p-NA and MIPIL can efficiently enhance the selective recognition force. The as-synthesized MIPIL microspheres present spherical shape, high fluorescence emission intensity and specific recognition, which showed rapid detection rate (1min), stable reusable property (at least 4 time recycles), wonderful selectivity over several structural analogs, wide linear range (10nM to 10M) with a correlation coefficient of 0.992, and excellent sensitivity (LOD, 9nM). As synthesis and surface functionalization of MIPIL microspheres are well established, the methods reported in this work are facile, rapid and efficient for monitoring p-NA in environmental wastewater. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Rapid method for plutonium-241 determination in soil samples

    OpenAIRE

    Piekarz, M.; Komosa, A.

    2014-01-01

    A simple and rapid procedure for the determination of plutonium isotopes in the environment is presented. The procedure combines alpha spectrometry, solvent extraction and liquid scintillation measurements to ensure that both alpha- and beta-emitting isotopes are determined. Of five tested extractants, bis-(2-ethylhexyl) phosphoric acid was found to be the best choice. The procedure was applied to soil samples contaminated with Chernobyl fallout.

  17. Comparison of traditional physico-chemical methods and molecular ...

    African Journals Online (AJOL)

    Jane

    2011-10-12

    Oct 12, 2011 ... This study was aim to review the efficiency of molecular markers and traditional physico-chemical methods for the identification of basmati ... Key words: Basmati rice, physico-chemical characteristics, molecular markers, genetic diversity, organoleptic evaluation. .... IARI, New Delhi, India. Fine, semi dwarf.

  18. MALDI-TOF MS enables the rapid identification of the major molecular types within the Cryptococcus neoformans/C. gattii species complex.

    Directory of Open Access Journals (Sweden)

    Carolina Firacative

    Full Text Available BACKGROUND: The Cryptococcus neoformans/C. gattii species complex comprises two sibling species that are divided into eight major molecular types, C. neoformans VNI to VNIV and C. gattii VGI to VGIV. These genotypes differ in host range, epidemiology, virulence, antifungal susceptibility and geographic distribution. The currently used phenotypic and molecular identification methods for the species/molecular types are time consuming and expensive. As Matrix-Assisted Laser Desorption Ionization-Time-of-Flight Mass Spectrometry (MALDI-TOF MS offers an effective alternative for the rapid identification of microorganisms, the objective of this study was to examine its potential for the identification of C. neoformans and C. gattii strains at the intra- and inter-species level. METHODOLOGY: Protein extracts obtained via the formic acid extraction method of 164 C. neoformans/C. gattii isolates, including four inter-species hybrids, were studied. RESULTS: The obtained mass spectra correctly identified 100% of all studied isolates, grouped each isolate according to the currently recognized species, C. neoformans and C. gattii, and detected potential hybrids. In addition, all isolates were clearly separated according to their major molecular type, generating greater spectral differences among the C. neoformans molecular types than the C. gattii molecular types, most likely reflecting a closer phylogenetic relationship between the latter. The number of colonies used and the incubation length did not affect the results. No spectra were obtained from intact yeast cells. An extended validated spectral library containing spectra of all eight major molecular types was established. CONCLUSIONS: MALDI-TOF MS is a rapid identification tool for the correct recognition of the two currently recognized human pathogenic Cryptococcus species and offers a simple method for the separation of the eight major molecular types and the detection of hybrid strains within this

  19. A tree-based method for the rapid screening of chemical fingerprints

    Directory of Open Access Journals (Sweden)

    Pedersen Christian NS

    2010-01-01

    Full Text Available Abstract Background The fingerprint of a molecule is a bitstring based on its structure, constructed such that structurally similar molecules will have similar fingerprints. Molecular fingerprints can be used in an initial phase of drug development for identifying novel drug candidates by screening large databases for molecules with fingerprints similar to a query fingerprint. Results In this paper, we present a method which efficiently finds all fingerprints in a database with Tanimoto coefficient to the query fingerprint above a user defined threshold. The method is based on two novel data structures for rapid screening of large databases: the kD grid and the Multibit tree. The kD grid is based on splitting the fingerprints into k shorter bitstrings and utilising these to compute bounds on the similarity of the complete bitstrings. The Multibit tree uses hierarchical clustering and similarity within each cluster to compute similar bounds. We have implemented our method and tested it on a large real-world data set. Our experiments show that our method yields approximately a three-fold speed-up over previous methods. Conclusions Using the novel kD grid and Multibit tree significantly reduce the time needed for searching databases of fingerprints. This will allow researchers to (1 perform more searches than previously possible and (2 to easily search large databases.

  20. A rapid, small-scale sedimentation method to predict breadmaking quality of hard winter wheat

    Science.gov (United States)

    Breeders and processors are always looking for rapid and accurate methods to evaluate wheat quality. A rapid small-scale hybrid sedimentation method was developed for predicting breadmaking quality of breeders samples by combining the sodium dodecyl-sulfate (SDS) sedimentation method (AACC 56-70) an...

  1. Development a rapid and accurate multiplex real time PCR method for the detection Chlamydia trachomatis and Mycoplasma hominis.

    Science.gov (United States)

    Safarkar, Roya; Mehrabadi, Jalil Fallah; Noormohammadi, Zahra; Mirnejad, Reza

    2017-11-01

    Sexually transmitted diseases easily spread among sexually active people and often have no symptoms. Rapid and accurate method for detecting these infections are necessary in early stages. The traditional detection methods of them are difficult and time-consuming. In this study, multiplex real time PCR was optimized for rapid identification of Chlamydia trachomatis and Mycoplasma hominis in a single tube and was performed with our designed primers. The sensitivity test was carried out to designed primers with diluted genomic DNA. To defined the specificity, non STD bacteria were used as DNA template. This study indicated that the developed multiplex real time PCR can be an effective alternative procedure to the conventional methods for rapid and accurate identification of C Chlamydia trachomatis and Mycoplasma hominis. Multiplex real-time PCR Results of them were checked with melting curves. The sensitivity of our designed primer by multiplex real time PCR for Chlamydia trachomatis and Mycoplasma hominis were 4.78×1010 and 8.35×1010 , respectively, Which the primers did not amplify any product from a non-STD species. Multiplex real time PCR by our new primers and analysis of melting curves were successfully usable for rapid and accurate detection of Chlamydia trachomatis and Mycoplasma hominis. This assay instead of traditional culture method, has considerable potential to be rapid, accurate and highly sensitive molecular diagnostic tool for simultaneous and direct detection. © 2017 Wiley Periodicals, Inc.

  2. A rapid method to estimate Westergren sedimentation rates

    Science.gov (United States)

    Alexy, Tamas; Pais, Eszter; Meiselman, Herbert J.

    2009-01-01

    The erythrocyte sedimentation rate (ESR) is a nonspecific but simple and inexpensive test that was introduced into medical practice in 1897. Although it is commonly utilized in the diagnosis and follow-up of various clinical conditions, ESR has several limitations including the required 60 min settling time for the test. Herein we introduce a novel use for a commercially available computerized tube viscometer that allows the accurate prediction of human Westergren ESR rates in as little as 4 min. Owing to an initial pressure gradient, blood moves between two vertical tubes through a horizontal small-bore tube and the top of the red blood cell (RBC) column in each vertical tube is monitored continuously with an accuracy of 0.083 mm. Using data from the final minute of a blood viscosity measurement, a sedimentation index (SI) was calculated and correlated with results from the conventional Westergren ESR test. To date, samples from 119 human subjects have been studied and our results indicate a strong correlation between SI and ESR values (R2=0.92). In addition, we found a close association between SI and RBC aggregation indices as determined by an automated RBC aggregometer (R2=0.71). Determining SI on human blood is rapid, requires no special training and has minimal biohazard risk, thus allowing physicians to rapidly screen for individuals with elevated ESR and to monitor therapeutic responses. PMID:19791973

  3. Molecular Procedure for Rapid Detection of Burkholderia mallei and Burkholderia pseudomallei

    Science.gov (United States)

    Bauernfeind, Adolf; Roller, Carsten; Meyer, Detlef; Jungwirth, Renate; Schneider, Ines

    1998-01-01

    A PCR procedure for the discrimination of Burkholderia mallei and Burkholderia pseudomallei was developed. It is based on the nucleotide difference T 2143 C (T versus C at position 2143) between B. mallei and B. pseudomallei detected in the 23S rDNA sequences. In comparison with conventional methods the procedure allows more rapid identification at reduced risk for infection of laboratory personnel. PMID:9705426

  4. Quantitative Methods for Molecular Diagnostic and Therapeutic Imaging

    OpenAIRE

    Li, Quanzheng

    2013-01-01

    This theme issue provides an overview on the basic quantitative methods, an in-depth discussion on the cutting-edge quantitative analysis approaches as well as their applications for both static and dynamic molecular diagnostic and therapeutic imaging.

  5. Comparison of rapid colorimetric method with conventional method in the isolation of mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Oberoi A

    2004-01-01

    Full Text Available The aim of the study was to evaluate two methods (colorimetric and conventional for isolation of Mycobacterium tuberculosis. A total of 500 clinical specimens were processed by modified Petroff′s method and then inoculated into MB/BacT-240 system bottles and on LJ medium slopes. The specimens included 242 sputum, 95 gastric aspirates, 47 pleural fluids, 45 CSF, 32 urine, 18 pus, 11 bronchoalveolar lavage, 3 tissue, 2 stool, 2 lymphnode specimens, 2 synovial fluid and 1 bronchial wash specimens. The isolation rate was 16.4% by the colorimetric method and 2.2% by the conventional method. The mean detection time was 16 days and 26 days respectively. Among 36 direct smear positive samples, 63.9%(23/36 and 30%(11/36 were positive by colorimetric and conventional methods respectively. Out of 464 direct smear negative samples 12.9%(60/464 and 0.6%(3/464 were positive by colorimetric and conventional methods respectively. Therefore, colorimetric method enables rapid detection leading to early diagnosis and drug susceptibility testing.

  6. Meselect – A rapid and effective method for the separation of the main leaf tissue types

    Directory of Open Access Journals (Sweden)

    Julia Svozil

    2016-11-01

    Full Text Available Individual tissues of complex eukaryotic organisms have specific gene expression programs that control their functions. Therefore, tissue-specific molecular information is required to increase our understanding of tissue-specific processes. Established methods in plants to obtain specific tissues or cell types from their organ or tissue context typically require the enzymatic degradation of cell walls followed by fluorescence-activated cell sorting (FACS using plants engineered for localized expression of green fluorescent protein (GFP. This has facilitated the acquisition of valuable data, mainly on root cell type-specific transcript and protein expression. However, FACS of different leaf cell types is difficult because of chlorophyll autofluorescence that interferes with the sorting process. Furthermore, the cell wall composition is different in each cell type. This results in long incubation times for refractory cell types, and cell sorting itself can take several hours. To overcome these limitations, we developed Meselect (mechanical separation of leaf compound tissues, a rapid and effective method for the separation of leaf epidermal, vascular and mesophyll tissues. Meselect is a novel combination of mechanical separation and rapid protoplasting, which benefits from the unique cell wall composition of the different tissue types. Meselect has several advantages over cell sorting: it does not require expensive equipment such as a cell sorter and does not depend on specific fluorescent reporter lines, the use of blenders as well as the inherent mixing of different cell types and of intact and damaged cells can be avoided, and the time between wounding of the leaf and freezing of the sample is short. The efficacy and specificity of the method to enrich the different leaf tissue types has been confirmed using Arabidopsis leaves, but it has also been successfully used for leaves of other plants such as tomato or cassava. The method is therefore

  7. Nanotools and molecular techniques to rapidly identify and fight bacterial infections.

    Science.gov (United States)

    Dinarelli, S; Girasole, M; Kasas, S; Longo, G

    2017-07-01

    Reducing the emergence and spread of antibiotic-resistant bacteria is one of the major healthcare issues of our century. In addition to the increased mortality, infections caused by multi-resistant bacteria drastically enhance the healthcare costs, mainly because of the longer duration of illness and treatment. While in the last 20years, bacterial identification has been revolutionized by the introduction of new molecular techniques, the current phenotypic techniques to determine the susceptibilities of common Gram-positive and Gram-negative bacteria require at least two days from collection of clinical samples. Therefore, there is an urgent need for the development of new technologies to determine rapidly drug susceptibility in bacteria and to achieve faster diagnoses. These techniques would also lead to a better understanding of the mechanisms that lead to the insurgence of the resistance, greatly helping the quest for new antibacterial systems and drugs. In this review, we describe some of the tools most currently used in clinical and microbiological research to study bacteria and to address the challenge of infections. We discuss the most interesting advancements in the molecular susceptibility testing systems, with a particular focus on the many applications of the MALDI-TOF MS system. In the field of the phenotypic characterization protocols, we detail some of the most promising semi-automated commercial systems and we focus on some emerging developments in the field of nanomechanical sensors, which constitute a step towards the development of rapid and affordable point-of-care testing devices and techniques. While there is still no innovative technique that is capable of completely substituting for the conventional protocols and clinical practices, many exciting new experimental setups and tools could constitute the basis of the standard testing package of future microbiological tests. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Cost and Impact on Patient Length of Stay of Rapid Molecular Testing for Clostridium difficile.

    Science.gov (United States)

    Sewell, Bernadette; Rees, Eugene; Thomas, Ian; Ch'ng, Chin Lye; Isaac, Mike; Berry, Nidhika

    2014-12-01

    A study was performed to assess the cost of a rapid molecular assay (PCR) for diagnosis of Clostridium difficile infection (CDI) and the impact of its routine use on patient length of stay (LOS) in comparison with cell culture cytotoxin neutralization assay (CCNA). From March 2011 to September 2011, Xpert(®) C. difficile (Cepheid, Sunnyvale, CA, USA) PCR was used on patients with suspicion of CDI in two acute care hospitals in Abertawe Bro Morgannwg University Health Board, Swansea, Wales, UK. Test results were used for patient management. LOS and time to reportable result were compared for negative and positive prospective patients tested by PCR and historic control patients tested by CCNA during March 2010 to September 2010. Tests were priced using micro-costing and a cost comparison analysis was undertaken. In total, 506 patients were included. Time to reportable result for PCR samples was 1.53 h compared to 46.54 h for CCNA negatives and 22.45 h for CCNA positives. Patients tested by CCNA stayed 4.88 days longer in hospital compared to PCR patients if they tested positive and 7.03 days if tests were negative. The mean reduction in LOS observed in our study has the potential to generate cost savings of up to £2,292.62 for every patient with suspected CDI, if samples were to be tested routinely with PCR instead of CCNA. A rapid molecular test for C. difficile in an acute hospital setting produced quick results that led to a decrease in LOS compared to historic CCNA control patients. This could result in considerable savings through reduced excess inpatient days.

  9. Advanced fault diagnosis methods in molecular networks.

    Science.gov (United States)

    Habibi, Iman; Emamian, Effat S; Abdi, Ali

    2014-01-01

    Analysis of the failure of cell signaling networks is an important topic in systems biology and has applications in target discovery and drug development. In this paper, some advanced methods for fault diagnosis in signaling networks are developed and then applied to a caspase network and an SHP2 network. The goal is to understand how, and to what extent, the dysfunction of molecules in a network contributes to the failure of the entire network. Network dysfunction (failure) is defined as failure to produce the expected outputs in response to the input signals. Vulnerability level of a molecule is defined as the probability of the network failure, when the molecule is dysfunctional. In this study, a method to calculate the vulnerability level of single molecules for different combinations of input signals is developed. Furthermore, a more complex yet biologically meaningful method for calculating the multi-fault vulnerability levels is suggested, in which two or more molecules are simultaneously dysfunctional. Finally, a method is developed for fault diagnosis of networks based on a ternary logic model, which considers three activity levels for a molecule instead of the previously published binary logic model, and provides equations for the vulnerabilities of molecules in a ternary framework. Multi-fault analysis shows that the pairs of molecules with high vulnerability typically include a highly vulnerable molecule identified by the single fault analysis. The ternary fault analysis for the caspase network shows that predictions obtained using the more complex ternary model are about the same as the predictions of the simpler binary approach. This study suggests that by increasing the number of activity levels the complexity of the model grows; however, the predictive power of the ternary model does not appear to be increased proportionally.

  10. Computational methods in molecular imaging technologies

    CERN Document Server

    Gunjan, Vinit Kumar; Venkatesh, C; Amarnath, M

    2017-01-01

    This book highlights the experimental investigations that have been carried out on magnetic resonance imaging and computed tomography (MRI & CT) images using state-of-the-art Computational Image processing techniques, and tabulates the statistical values wherever necessary. In a very simple and straightforward way, it explains how image processing methods are used to improve the quality of medical images and facilitate analysis. It offers a valuable resource for researchers, engineers, medical doctors and bioinformatics experts alike.

  11. Projector augmented wave method: ab initio molecular dynamics ...

    Indian Academy of Sciences (India)

    http://www.ias.ac.in/article/fulltext/boms/026/01/0033-0041 ... A brief introduction to the projector augmented wave method is given and recent developments are reviewed. The projector augmented wave method is an all-electron method for efficient ab initio molecular dynamics simulations with full wave functions. It extends ...

  12. Projector augmented wave method: ab initio molecular dynamics ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A brief introduction to the projector augmented wave method is given and recent developments are reviewed. The projector augmented wave method is an all-electron method for efficient ab initio molecular dynamics simulations with full wave functions. It extends and combines the traditions of existing augmented.

  13. Molecular dynamics with deterministic and stochastic numerical methods

    CERN Document Server

    Leimkuhler, Ben

    2015-01-01

    This book describes the mathematical underpinnings of algorithms used for molecular dynamics simulation, including both deterministic and stochastic numerical methods. Molecular dynamics is one of the most versatile and powerful methods of modern computational science and engineering and is used widely in chemistry, physics, materials science and biology. Understanding the foundations of numerical methods means knowing how to select the best one for a given problem (from the wide range of techniques on offer) and how to create new, efficient methods to address particular challenges as they arise in complex applications.  Aimed at a broad audience, this book presents the basic theory of Hamiltonian mechanics and stochastic differential equations, as well as topics including symplectic numerical methods, the handling of constraints and rigid bodies, the efficient treatment of Langevin dynamics, thermostats to control the molecular ensemble, multiple time-stepping, and the dissipative particle dynamics method...

  14. Rapid and Reliable HPLC Method for the Determination of Vitamin ...

    African Journals Online (AJOL)

    Purpose: To develop and validate an accurate, sensitive and reproducible high performance liquid chromatographic (HPLC) method for the quantitation of vitamin C in pharmaceutical samples. Method: The drug and the standard were eluted from Superspher RP-18 (250 mm x 4.6 mm, 10ìm particle size) at 20 0C.

  15. Rapid, cost-effective liquid chromatograghic method for the ...

    African Journals Online (AJOL)

    The method is highly sensitive, with limit of detection of 1 ng/ml. The coefficient of variation for within-day run was less than 4% while that of day-to-day run was less than 6%. There were no interfering peaks from endogenous materials in the serum. The method was validated and used for pharmacokinetic studies ...

  16. Rapid molecular assays for the detection of yellow fever virus in low-resource settings.

    Directory of Open Access Journals (Sweden)

    Camille Escadafal

    2014-03-01

    Full Text Available BACKGROUND: Yellow fever (YF is an acute viral hemorrhagic disease transmitted by Aedes mosquitoes. The causative agent, the yellow fever virus (YFV, is found in tropical and subtropical areas of South America and Africa. Although a vaccine is available since the 1930s, YF still causes thousands of deaths and several outbreaks have recently occurred in Africa. Therefore, rapid and reliable diagnostic methods easy to perform in low-resources settings could have a major impact on early detection of outbreaks and implementation of appropriate response strategies such as vaccination and/or vector control. METHODOLOGY: The aim of this study was to develop a YFV nucleic acid detection method applicable in outbreak investigations and surveillance studies in low-resource and field settings. The method should be simple, robust, rapid and reliable. Therefore, we adopted an isothermal approach and developed a recombinase polymerase amplification (RPA assay which can be performed with a small portable instrument and easy-to-use lyophilized reagents. The assay was developed in three different formats (real-time with or without microfluidic semi-automated system and lateral-flow assay to evaluate their application for different purposes. Analytical specificity and sensitivity were evaluated with a wide panel of viruses and serial dilutions of YFV RNA. Mosquito pools and spiked human plasma samples were also tested for assay validation. Finally, real-time RPA in portable format was tested under field conditions in Senegal. CONCLUSION/SIGNIFICANCE: The assay was able to detect 20 different YFV strains and demonstrated no cross-reactions with closely related viruses. The RPA assay proved to be a robust, portable method with a low detection limit (<21 genome equivalent copies per reaction and rapid processing time (<20 min. Results from real-time RPA field testing were comparable to results obtained in the laboratory, thus confirming our method is suitable for

  17. A method of rapid testing of radioactivity of different materials

    Directory of Open Access Journals (Sweden)

    Yu. Zabulonov

    2016-10-01

    Full Text Available A new method for the detection of low-level ionising radiation in solid, liquid or loose materials, which is based on the use of the Bayesian approach for the estimation of probabilistic parameters and a special statistical criterion, is offered in the present paper. We describe the algorithm and show the advantages of the method. The approach can be effective even in the case of extremely low signals whose intensity is much less than the background radiation.

  18. Rapid, specific and sensitive method for isoniazid determination in serum.

    Science.gov (United States)

    Sadeg, N; Pertat, N; Dutertre, H; Dumontet, M

    1996-01-12

    An original simple, specific and rapid high-performance liquid chromatographic assay for the determination of isoniazid (INH) in human serum is presented. The drug was extracted from the serum by protein precipitation with 30% (w/v) trichloroacetic acid, then the drug was reacted with the coupling reagent, trans-cinnamaldehyde, to form a derivative absorbing at 340 nm. A 20-microliters aliquot was injected into the chromatograph after neutralization with 1 M KOH solution. A liquid chromatograph equipped with a reversed-phase 30-microns C18 precolumn linked to a 4-microns C18 analytical column was used. The drug was eluted with a mixture of acetonitrile-water-triethylamine-acetic acid (400:600:2:1, v/v), pH value was 5 +/- 1. Flow-rate and wavelength were set at 1 ml/min and 340 nm, respectively. The extraction recoveries from human serum averaged 100% for INH at concentrations of 1, 2 and 4 mg/l. The coefficients of variation for three different concentrations for INH in serum in the within-day study varied between 1.2 and 3.5%, whereas those in the day-to-day study varied between 2.8 and 4.3%.

  19. Asymptotic and Numerical Methods for Rapidly Rotating Buoyant Flow

    Science.gov (United States)

    Grooms, Ian G.

    This thesis documents three investigations carried out in pursuance of a doctoral degree in applied mathematics at the University of Colorado (Boulder). The first investigation concerns the properties of rotating Rayleigh-Benard convection -- thermal convection in a rotating infinite plane layer between two constant-temperature boundaries. It is noted that in certain parameter regimes convective Taylor columns appear which dominate the dynamics, and a semi-analytical model of these is presented. Investigation of the columns and of various other properties of the flow is ongoing. The second investigation concerns the interactions between planetary-scale and mesoscale dynamics in the oceans. Using multiple-scale asymptotics the possible connections between planetary geostrophic and quasigeostrophic dynamics are investigated, and three different systems of coupled equations are derived. Possible use of these equations in conjunction with the method of superparameterization, and extension of the asymptotic methods to the interactions between mesoscale and submesoscale dynamics is ongoing. The third investigation concerns the linear stability properties of semi-implicit methods for the numerical integration of ordinary differential equations, focusing in particular on the linear stability of IMEX (Implicit-Explicit) methods and exponential integrators applied to systems of ordinary differential equations arising in the numerical solution of spatially discretized nonlinear partial differential equations containing both dispersive and dissipative linear terms. While these investigations may seem unrelated at first glance, some reflection shows that they are in fact closely linked. The investigation of rotating convection makes use of single-space, multiple-time-scale asymptotics to deal with dynamics strongly constrained by rotation. Although the context of thermal convection in an infinite layer seems somewhat removed from large-scale ocean dynamics, the asymptotic

  20. A Rapid and Reliable Method for Total Protein Extraction from Succulent Plants for Proteomic Analysis.

    Science.gov (United States)

    Lledías, Fernando; Hernández, Felipe; Rivas, Viridiana; García-Mendoza, Abisaí; Cassab, Gladys I; Nieto-Sotelo, Jorge

    2017-08-01

    Crassulacean acid metabolism plants have some morphological features, such as succulent and reduced leaves, thick cuticles, and sunken stomata that help them prevent excessive water loss and irradiation. As molecular constituents of these morphological adaptations to xeric environments, succulent plants produce a set of specific compounds such as complex polysaccharides, pigments, waxes, and terpenoids, to name a few, in addition to uncharacterized proteases. Since all these compounds interfere with the analysis of proteins by electrophoretic techniques, preparation of high quality samples from these sources represents a real challenge. The absence of adequate protocols for protein extraction has restrained the study of this class of plants at the molecular level. Here, we present a rapid and reliable protocol that could be accomplished in 1 h and applied to a broad range of plants with reproducible results. We were able to obtain well-resolved SDS/PAGE protein patterns in extracts from different members of the subfamilies Agavoideae (Agave, Yucca, Manfreda, and Furcraea), Nolinoideae (Dasylirion and Beucarnea), and the Cactaceae family. This method is based on the differential solubility of contaminants and proteins in the presence of acetone and pH-altered solutions. We speculate about the role of saponins and high molecular weight carbohydrates to produce electrophoretic-compatible samples. A modification of the basic protocol allowed the analysis of samples by bidimensional electrophoresis (2DE) for proteomic analysis. Furostanol glycoside 26-O-β-glucosidase (an enzyme involved in steroid saponin synthesis) was successfully identified by mass spectrometry analysis and de novo sequencing of a 2DE spot from an Agave attenuata sample.

  1. DEVELOPMENT OF A MOLECULAR METHOD TO IDENTIFY ...

    Science.gov (United States)

    Hepatitis E virus (HEV) is an emerging pathogen that causes significant illness in the developing world. Like the hepatitis A virus, it is transmitted via the fecal-oral route and can cause short-term, acute hepatitis. In addition, hepatitis E has been found to cause a significant rate of mortality in pregnant women. Thus far, a hepatitis E outbreak has not been reported in the U. S. although a swine variant of the virus is common in Midwestern hogs. Since it will be important to identify the presence of this virus in the water supply, we have developed and are testing a reverse transcription-polymerase chain reaction (RT-PCR) method that should be able to identify all of the known HEV strains. Develop sensitive techniques to detect and identify emerging human waterborne pathogenic viruses and viruses on the CCL.Determine effectiveness of viral indicators to measure microbial quality in water matrices.Support activities: (a) culture and distribution of mammalian cells for Agency and scientific community research needs, (b) provide operator expertise for research requiring confocal and electron microscopy, (c) glassware cleaning, sterilization and biological waste disposal for the Cincinnati EPA facility, (d) operation of infectious pathogenic suite, (e) maintenance of walk-in constant temperature rooms and (f) provide Giardia cysts.

  2. Development of a rapid HRM genotyping method for detection of dog-derived Giardia lamblia.

    Science.gov (United States)

    Tan, Liping; Yu, Xingang; Abdullahi, Auwalu Yusuf; Wu, Sheng; Zheng, Guochao; Hu, Wei; Song, Meiran; Wang, Zhen; Jiang, Biao; Li, Guoqing

    2015-11-01

    Giardia lamblia is a zoonotic flagellate protozoan in the intestine of human and many mammals including dogs. To assess a threat of dog-derived G. lamblia to humans, the common dog-derived G. lamblia assemblages A, C, and D were genotyped by high-resolution melting (HRM) technology. According to β-giardin gene sequence, the qPCR-HRM primers BG5 and BG7 were designed. A series of experiments on the stability, sensitivity, and accuracy of the HRM method were also tested. Results showed that the primers BG5 and BG7 could distinguish among three assemblages A, C, and D, which Tm value differences were about 1 °C to each other. The melting curves of intra-assay reproducibility were almost coincided, and those of inter-assay reproducibility were much the same shape. The lowest detection concentration was about 5 × 10(-6)-ng/μL sample. The genotyping results from 21 G. lamblia samples by the HRM method were in complete accordance with sequencing results. It is concluded that the HRM genotyping method is rapid, stable, specific, highly sensitive, and suitable for clinical detection and molecular epidemiological survey of dog-derived G. lamblia.

  3. A rapid and efficient electroporation method for transformation of Halomonas sp. O-1.

    Science.gov (United States)

    Harris, Joshua R; Lundgren, Benjamin R; Grzeskowiak, Brian R; Mizuno, Kouhei; Nomura, Christopher T

    2016-10-01

    Halomonas sp. O-1 is a halophilic bacterium with a high potential for industrial application due to its natural ability to produce polyhydroxyalkanoates (PHAs) using seawater-based media. However, a major barrier preventing industrial scale implementation of this organism is a lack of molecular methodologies capable of readily transforming members of the Halomonas genus. Currently, the only reliable method used for introducing DNA into Halomonas spp. is bacterial conjugation, a somewhat tedious and time-consuming technique compared to electroporation-based methodologies. Here we describe a rapid and reproducible method for the electroporation of Halomonas sp. O-1 with plasmid DNA. Electrocompetent cells were generated by growing Halomonas sp. O-1 in a yeast extract-tryptone medium with a final salinity of 3.5%, pH of 7.5, followed by several washes using 300mM sucrose. Results show that plasmids containing chloramphenicol (Cm(R)) and gentamicin (Gm(R)) resistance cassettes are suitable antibiotic selection markers for transformation and yields of 10(4) transformants per μg of DNA were obtained. This method is simple to perform and the materials used are readily available in most research labs. Additionally, this plasmid-based transformation procedure has the potential to be adapted for a number of applications including the creation of recombinant stains and the generation of deletion mutants of Halomonas spp. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. A hierarchical method for molecular docking using cloud computing.

    Science.gov (United States)

    Kang, Ling; Guo, Quan; Wang, Xicheng

    2012-11-01

    Discovering small molecules that interact with protein targets will be a key part of future drug discovery efforts. Molecular docking of drug-like molecules is likely to be valuable in this field; however, the great number of such molecules makes the potential size of this task enormous. In this paper, a method to screen small molecular databases using cloud computing is proposed. This method is called the hierarchical method for molecular docking and can be completed in a relatively short period of time. In this method, the optimization of molecular docking is divided into two subproblems based on the different effects on the protein-ligand interaction energy. An adaptive genetic algorithm is developed to solve the optimization problem and a new docking program (FlexGAsDock) based on the hierarchical docking method has been developed. The implementation of docking on a cloud computing platform is then discussed. The docking results show that this method can be conveniently used for the efficient molecular design of drugs. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Rapid, cost-effective liquid chromatograghic method for the ...

    African Journals Online (AJOL)

    GRACE

    2006-07-03

    Jul 3, 2006 ... Akay C, Ozkan SA, Senturk Z, Cevheroglu S (2002). Simultaneous determination of metronidazole and miconazole in pharmaceutical dosage form by HPLC. Farmaco. Nov.57(11): 953-7. Galmier MJ, Frasey AM, Bastide M, Beyssac E, Petit J, Aiache JM,. Lartigue-Mattei (1998). Simple and sensitive method ...

  6. RESEARCH NOTE A Universal, rapid, and inexpensive method for ...

    Indian Academy of Sciences (India)

    Navya

    very satisfactory for many researchers to prepare reagents for “all in one” ready to use method to extract gDNA from very wide range sources of blood samples. To meet these criteria, a universal and versatile DNA extraction procedure should be developedwith a minimal chemicals and equipment.On the other hand, the ...

  7. Rapid prototyping methods for the manufacture of fuel cells

    Directory of Open Access Journals (Sweden)

    Dudek Piotr

    2016-01-01

    The potential for the application of this method for the manufacture of metallic bipolar plates (BPP for use in proton exchange membrane fuel cells (PEMFCs is presented and discussed. Special attention is paid to the fabrication of light elements for the construction of PEMFC stacks designed for mobile applications such as aviation technology and unmanned aerial vehicles (UAVs.

  8. [Methods for the rapid preparation of paraffin blocks].

    Science.gov (United States)

    Shmurun, R I

    1992-01-01

    Two accelerated chloroform-paraffin processings of materials with the use of ultrasound (US) and microwave (MW) irradiation in the stove "Electronica" as well as a combined method with US- and MW-irradiation are proposed to shorten drastically the duration of the prehistologic processing.

  9. Rapid multi-residue method for the determination of pesticide ...

    African Journals Online (AJOL)

    Exposure to pesticides can represent a potential risk to humans. Agricultural workers are at risk of chronic toxicity. Hence, the evaluation of pesticide residues in their blood gives an indication about the extent of exposure and help in assessing adverse health effects. The aim of our study was to develop analytical method for ...

  10. NATO Advanced Study Institute on Methods in Computational Molecular Physics

    CERN Document Server

    Diercksen, Geerd

    1992-01-01

    This volume records the lectures given at a NATO Advanced Study Institute on Methods in Computational Molecular Physics held in Bad Windsheim, Germany, from 22nd July until 2nd. August, 1991. This NATO Advanced Study Institute sought to bridge the quite considerable gap which exist between the presentation of molecular electronic structure theory found in contemporary monographs such as, for example, McWeeny's Methods 0/ Molecular Quantum Mechanics (Academic Press, London, 1989) or Wilson's Electron correlation in moleeules (Clarendon Press, Oxford, 1984) and the realization of the sophisticated computational algorithms required for their practical application. It sought to underline the relation between the electronic structure problem and the study of nuc1ear motion. Software for performing molecular electronic structure calculations is now being applied in an increasingly wide range of fields in both the academic and the commercial sectors. Numerous applications are reported in areas as diverse as catalysi...

  11. Time evolution of the wave equation using rapid expansion method

    KAUST Repository

    Pestana, Reynam C.

    2010-07-01

    Forward modeling of seismic data and reverse time migration are based on the time evolution of wavefields. For the case of spatially varying velocity, we have worked on two approaches to evaluate the time evolution of seismic wavefields. An exact solution for the constant-velocity acoustic wave equation can be used to simulate the pressure response at any time. For a spatially varying velocity, a one-step method can be developed where no intermediate time responses are required. Using this approach, we have solved for the pressure response at intermediate times and have developed a recursive solution. The solution has a very high degree of accuracy and can be reduced to various finite-difference time-derivative methods, depending on the approximations used. Although the two approaches are closely related, each has advantages, depending on the problem being solved. © 2010 Society of Exploration Geophysicists.

  12. A taxonomy of rapid reviews links report types and methods to specific decision-making contexts.

    Science.gov (United States)

    Hartling, Lisa; Guise, Jeanne-Marie; Kato, Elisabeth; Anderson, Johanna; Belinson, Suzanne; Berliner, Elise; Dryden, Donna M; Featherstone, Robin; Mitchell, Matthew D; Motu'apuaka, Makalapua; Noorani, Hussein; Paynter, Robin; Robinson, Karen A; Schoelles, Karen; Umscheid, Craig A; Whitlock, Evelyn

    2015-12-01

    Describe characteristics of rapid reviews and examine the impact of methodological variations on their reliability and validity. We conducted a literature review and interviews with organizations that produce rapid reviews or related products to identify methods, guidance, empiric evidence, and current practices. We identified 36 rapid products from 20 organizations (production time, 5 minutes to 8 months). Methods differed from systematic reviews at all stages. As time frames increased, methods became more rigorous; however, restrictions on database searching, inclusion criteria, data extracted, and independent dual review remained. We categorized rapid products based on extent of synthesis. "Inventories" list what evidence is available. "Rapid responses" present best available evidence with no formal synthesis. "Rapid reviews" synthesize the quality of and findings from the evidence. "Automated approaches" generate meta-analyses in response to user-defined queries. Rapid products rely on a close relationship with end users and support specific decisions in an identified time frame. Limited empiric evidence exists comparing rapid and systematic reviews. Rapid products have tremendous methodological variation; categorization based on time frame or type of synthesis reveals patterns. The similarity across rapid products lies in the close relationship with the end user to meet time-sensitive decision-making needs. Copyright © 2015 Elsevier Inc. All rights reserved.

  13. Systems and methods for rapid processing and storage of data

    Science.gov (United States)

    Stalzer, Mark A.

    2017-01-24

    Systems and methods of building massively parallel computing systems using low power computing complexes in accordance with embodiments of the invention are disclosed. A massively parallel computing system in accordance with one embodiment of the invention includes at least one Solid State Blade configured to communicate via a high performance network fabric. In addition, each Solid State Blade includes a processor configured to communicate with a plurality of low power computing complexes interconnected by a router, and each low power computing complex includes at least one general processing core, an accelerator, an I/O interface, and cache memory and is configured to communicate with non-volatile solid state memory.

  14. Rapid new methods for paint collection and lead extraction.

    Science.gov (United States)

    Gutknecht, William F; Harper, Sharon L; Winstead, Wayne; Sorrell, Kristen; Binstock, David A; Salmons, Cynthia A; Haas, Curtis; McCombs, Michelle; Studabaker, William; Wall, Constance V; Moore, Curtis

    2009-01-01

    Chronic exposure of children to lead can result in permanent physiological impairment. In adults, it can cause irritability, poor muscle coordination, and nerve damage to the sense organs and nerves controlling the body. Surfaces coated with lead-containing paints are potential sources of exposure to lead. In April 2008, the U.S. Environmental Protection Agency (EPA) finalized new requirements that would reduce exposure to lead hazards created by renovation, repair, and painting activities, which disturb lead-based paint. On-site, inexpensive identification of lead-based paint is required. Two steps have been taken to meet this challenge. First, this paper presents a new, highly efficient method for paint collection that is based on the use of a modified wood drill bit. Second, this paper presents a novel, one-step approach for quantitatively grinding and extracting lead from paint samples for subsequent lead determination. This latter method is based on the use of a high-revolutions per minute rotor with stator to break up the paint into approximately 50 micron-size particles. Nitric acid (25%, v/v) is used to extract the lead in 95% for real-world paints, National Institute of Standards and Technology's standard reference materials, and audit samples from the American Industrial Hygiene Association's Environmental Lead Proficiency Analytical Testing Program. This quantitative extraction procedure, when paired with quantitative paint sample collection and lead determination, may enable the development of a lead paint test kit that will meet the specifications of the final EPA rule.

  15. Preparation of molecularly imprinted polymer with double templates for rapid simultaneous determination of melamine and dicyandiamide in dairy products.

    Science.gov (United States)

    Liu, Jiang; Song, Han; Liu, Jie; Liu, Yuan; Li, Le; Tang, Hui; Li, Yingchun

    2015-03-01

    In this study, a rapid and accurate determination strategy was established for simultaneous measurement of melamine (MLM) and dicyandiamide (DCD) directly in powdered milk by coupling molecularly imprinted solid-phase extraction (MISPE) with high performance liquid chromatography (HPLC). A novel double-template technique was adopted for preparing SPE packing agent and the obtained double-templated (MLM and DCD) molecularly imprinted polymers (MD-MIPs) was characterized by Fourier-transform infrared spectroscopy and scanning electron microscope (SEM). The molecular recognition ability and the binding capability of the as-prepared polymers towards MLM and DCD were evaluated via static and dynamic binding tests, and it was found that the MD-MIPs showed better affinity and selectivity for both templates compared with single-templated MIPs and non-imprinted polymers (NIPs). An approach based on MISPE and HPLC was then developed and optimized to detect MLM and DCD in powdered milk. The detection limit of the method (S/N=3) were 0.13 μg/g for MLM and 0.07 μg/g for DCD, and the relative standard deviation (RSD) of intra-day and inter-day determination for MLM was 3.3% and 4.7%, and 3.5% and 5.9% for DCD. The recoveries in MLM and DCD analysis at three spiked levels were 93.1-100.1% and 75.7-82.5%, respectively, with all RSD less than 5.2%. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Using a new molecular genetic of genotype and liquid culture medium for rapid diagnosis tb

    Directory of Open Access Journals (Sweden)

    Ганна Іванівна Барбова

    2015-10-01

    Full Text Available This paper presents the results of molecular genetic test system GenoType multyresistentens MTBDRplus. It was established that the presence of mutations associated with resistance to isoniazid, only 93.1 % of cases of MBT to isoniazid during the test in a liquid medium. Work carried out under the National Programme to combat tuberculosisMaterials and methods. We investigated the clinical sputum samples from patients with pulmonary tuberculosis. The applied system GenoType. Principle DNA strip technology GenoType is that the DNA-coated strip specific test that are complementary to the derived PCR amplicon. After the single-stranded amplicon denaturation associated with tests on strip (hybridize, and visualized in a sequential enzymatic reaction with streptavydynom and alkaline phosphatase. Evaluation of hybridization is performed automatically. For culturing sputum liquid culture medium used - Middlebrook broth 7N9 VASTES MGIT system.Results and discussion. The results of molecular genetic studies of samples of sputum-concentrated and concentrated by a system GenoType not differed (P>0.05. Diagnostic value of two methods (molecular and genetic – system GenoType and phenotype – VASTES MGIT 960 system was very high (100%. Two systems have tested positive in the study 756 (95.5 % Mycobacterium strains that were identified in the system VASTES MGIT 960, formed Cord Factor and the results were positive identification test ID MTB MGIT they attributed to Mycobacterium tuberculosis complex. 36 (4.5 % samples from positive MGIT tubes were negative. As a result of molecular-genetic identification of nontuberculous mycobacteria complex it was found that 18 (2.3 % strains of mycobacteria belonging to the M. avium-intracellulare, 12 (1.5 % mycobacterial cultures were attributed to M. kansasii, 6 (0, 7 % cultures were identified as M. fortuitum. The results of the molecular study of MS on Mycobacterium resistance profile INN + RIF coincided in 95.5 % (894

  17. Susceptibility testing of filamentous fungi to amphotericin B by a rapid radiometric method

    Energy Technology Data Exchange (ETDEWEB)

    Merz, W.G.; Fay, D.; Thumar, B.; Dixon, D.

    1984-01-01

    A rapid, radiometric method was developed to determine the susceptibility of filamentous fungi to amphotericin B. The rapid, radiometric method depended on measurement of the inhibition of /sup 24/CO/sub 2/ production in the presence of amphotericin B. Thirty isolates of filamentous fungi were tested by the rapid, radiometric method and a reference agar dilution method. There was 93% agreement between the two methods when an 80% or greater decrease in CO/sub 2/ production was used to calculate the minimal inhibitory concentration with the rapid, radiometric method. Minimal inhibitory concentrations, based on 80% decrease of CO/sub 2/ production, were achieved within 24 h of incubation with all of the fungi tested.

  18. Combined quantum mechanics/molecular mechanics (QM/MM) methods in computational enzymology.

    Science.gov (United States)

    van der Kamp, Marc W; Mulholland, Adrian J

    2013-04-23

    Computational enzymology is a rapidly maturing field that is increasingly integral to understanding mechanisms of enzyme-catalyzed reactions and their practical applications. Combined quantum mechanics/molecular mechanics (QM/MM) methods are important in this field. By treating the reacting species with a quantum mechanical method (i.e., a method that calculates the electronic structure of the active site) and including the enzyme environment with simpler molecular mechanical methods, enzyme reactions can be modeled. Here, we review QM/MM methods and their application to enzyme-catalyzed reactions to investigate fundamental and practical problems in enzymology. A range of QM/MM methods is available, from cheaper and more approximate methods, which can be used for molecular dynamics simulations, to highly accurate electronic structure methods. We discuss how modeling of reactions using such methods can provide detailed insight into enzyme mechanisms and illustrate this by reviewing some recent applications. We outline some practical considerations for such simulations. Further, we highlight applications that show how QM/MM methods can contribute to the practical development and application of enzymology, e.g., in the interpretation and prediction of the effects of mutagenesis and in drug and catalyst design.

  19. Rapid DNA extraction protocol from stool, suitable for molecular genetic diagnosis of colon cancer.

    Science.gov (United States)

    Abbaszadegan, Mohammad Reza; Velayati, Arash; Tavasoli, Alireza; Dadkhah, Ezzat

    2007-07-01

    Colorectal cancer (CRC) is one of the most common forms of cancers in the world and is curable if diagnosed at the early stage. Analysis of DNA extracted from stool specimens is a recent advantage to cancer diagnostics. Many protocols have been recommended for DNA extraction from stool, and almost all of them are difficult and time consuming, dealing with high amount of toxic materials like phenol. Their results vary due to sample collection method and further purification treatment. In this study, an easy and rapid method was optimized for isolating the human DNA with reduced PCR inhibitors present in stool. Fecal samples were collected from 10 colonoscopy-negative adult volunteers and 10 patients with CRC. Stool (1 g) was extracted using phenol/chloroform based protocol. The amplification of P53 exon 9 was examined to evaluate the extraction efficiency for human genomic targets and also compared its efficiency with Machiels et al. and Ito et al. protocols. The amplification of exon 9 of P53 from isolated fecal DNA was possible in most cases in 35 rounds of PCR using no additional purification procedure for elimination of the remaining inhibitors.inhibitors. A useful, rapid and easy protocol for routine extraction of DNA from stool was introduced and compared with two previous protocols.

  20. Simple and Rapid Molecular Techniques for Identification of Amylose Levels in Rice Varieties

    Science.gov (United States)

    Cheng, Acga; Ismail, Ismanizan; Osman, Mohamad; Hashim, Habibuddin

    2012-01-01

    The polymorphisms of Waxy (Wx) microsatellite and G-T single-nucleotide polymorphism (SNP) in the Wx gene region were analyzed using simplified techniques in fifteen rice varieties. A rapid and reliable electrophoresis method, MetaPhor agarose gel electrophoresis (MAGE), was effectively employed as an alternative to polyacrylamide gel electrophoresis (PAGE) for separating Wx microsatellite alleles. The amplified products containing the Wx microsatellite ranged from 100 to 130 bp in length. Five Wx microsatellite alleles, namely (CT)10, (CT)11, (CT)16, (CT)17, and (CT)18 were identified. Of these, (CT)11 and (CT)17 were the predominant classes among the tested varieties. All varieties with an apparent amylose content higher than 24% were associated with the shorter repeat alleles; (CT)10 and (CT)11, while varieties with 24% or less amylose were associated with the longer repeat alleles. All varieties with intermediate and high amylose content had the sequence AGGTATA at the 5′-leader intron splice site, while varieties with low amylose content had the sequence AGTTATA. The G-T polymorphism was further verified by the PCR-AccI cleaved amplified polymorphic sequence (CAPS) method, in which only genotypes containing the AGGTATA sequence were cleaved by AccI. Hence, varieties with desirable amylose levels can be developed rapidly using the Wx microsatellite and G-T SNP, along with MAGE. PMID:22754356

  1. Microwave as a rapid cooking method for beef tenderness evaluation.

    Science.gov (United States)

    Silva, Douglas R G; Fernandez, Ludimila C; Torres Filho, Robledo A; Fontes, Paulo R; Ramos, Alcinéia L S; Ramos, Eduardo M

    2017-11-20

    Semitendinosus (ST) muscle steaks were grouped according to three locations (proximal, middle, and distal end), grilled to endpoint temperature of 71C or cooked for 20, 30, 40, 50, or 60 s in a microwave oven (Mw). The location did not affect (p > .05) the cooking loss (CL) or shear force (SF) values. The CL increased (p  .05) from the grill samples. None of the microwaves' SF values were different (p > .05) from the grill values, with treatments Mw30 to Mw50 showing moderate repeatability (R = 0.51-0.60) and Mw30 and Mw60 showing higher correlations (r > .71) with grill values. Cooking beef strips with a microwave is a potential method for tenderness evaluation, but requires additional study to evaluate and optimize this application in different muscles and for comparison to sensorial data. The work was intended to evaluate the possibility of using a microwave oven for cooking meat to be used in objective measurement protocols for meat tenderness and to optimize the conditions for this purpose. The use of a standardized microwave procedure allows a dramatic reduction in analysis time and may reduce error variance due to nonuniform cooking procedures. © 2017 Wiley Periodicals, Inc.

  2. A method for rapid abundance estimation of semiplanktonic meiofauna

    Science.gov (United States)

    Armonies, Werner

    2000-12-01

    Many meiofaunal copepods and plathelminths enter the tidal waters at night thus exhibiting a life-style intermediate between benthic and planktonic. At the same time, ostracods may leave their interstitial dwelling and move across the sediment surface. In laboratory experiments, the percentage of plathelminth populations emerging from the sediment varied with the species, temperature, light conditions, and the dimensions of the sediment cores studied, but not with tidal level, season, ambient density of conspecifics, or the sediment composition. Therefore, the swimming activity may be utilised for extraction of semiplanktonic meiofauna provided that the extraction procedure is standardised with respect to temperature, light and core size. For free-living plathelminths from the Wadden Sea intertidal a robust standard procedure is as follows: sediment cores 1.6 cm in diameter (2 cm2 surface area) and 3 cm deep are fitted into cylindrical containers and submerged into aquaria containing filtered seawater (ambient salinity, room temperature, darkness) for 24 h. The sediment containers are then removed and the aquarian water filtered through appropriate meshes; the residue contains the emergent faunal component. For plathelminths, this procedure reduces sorting time by some 90% compared with the standard shaking-decantation method and thus makes it possible to process a high number of samples in a short time. Similar procedures may be developed for copepods and epibenthic ostracods.

  3. Designing and comparison study of rapid detection methods of resistance to injectable drugs in clinical strains of Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Fatemeh Salehi

    2012-01-01

    Full Text Available Introduction: In this study, some molecular methods were designed for rapid detection of resistance to kanamycin and amikacin.Materials and methods: Among 120 clinical isolates of mycobacterium tuberculosis, 70 strains were selected for evaluation of possible mutations. A PCR-RFLP method was designed for detection of wild type (using enzyme ajii and mutant from (BstFNI enzyme of the isolates. Furthermore, allele specific method (as PCR was designed for detection mutations in codons 1401 and 1402 gene rrs. Some selected isolates were sequenced.Results: In PCR-RFLP method, among the 70 strains examined by BstFNI enzyme, could detect 17 mutant strains among 24 phenotypicaly resistant and 44 non-mutant isolates from 46 susceptible isolates. The sensitivity of this method was %70.83 and specificity was %95.65 on the other hand, 12 mutant from 20 resistant strains and 29 non-mutant strains from 32 susceptible strains were detected by AjiI enzyme. The sensitivity and specificity of this method was 60 and %90.62, respectively. In MAS PCR, 3 mutants from 6 resistant strains and 12 non-mutants from 17 resistant strains were detected. The sensitivity of this method was 50 and specificity was 70.58. Results of sequencing method confirmed the results of molecular methods.Discussion and conclusion: PCR-RFLP method by BstFNI enzyme was the best method for rapid detection of Mycobacterium tuberculosis resistant to second-line injectable drugs and was recommended for routine use.

  4. Meteorite Impact-Induced Rapid NH3 Production on Early Earth: Ab Initio Molecular Dynamics Simulation

    Science.gov (United States)

    Shimamura, Kohei; Shimojo, Fuyuki; Nakano, Aiichiro; Tanaka, Shigenori

    2016-12-01

    NH3 is an essential molecule as a nitrogen source for prebiotic amino acid syntheses such as the Strecker reaction. Previous shock experiments demonstrated that meteorite impacts on ancient oceans would have provided a considerable amount of NH3 from atmospheric N2 and oceanic H2O through reduction by meteoritic iron. However, specific production mechanisms remain unclear, and impact velocities employed in the experiments were substantially lower than typical impact velocities of meteorites on the early Earth. Here, to investigate the issues from the atomistic viewpoint, we performed multi-scale shock technique-based ab initio molecular dynamics simulations. The results revealed a rapid production of NH3 within several picoseconds after the shock, indicating that shocks with greater impact velocities would provide further increase in the yield of NH3. Meanwhile, the picosecond-order production makes one expect that the important nitrogen source precursors of amino acids were obtained immediately after the impact. It was also observed that the reduction of N2 proceeded according to an associative mechanism, rather than a dissociative mechanism as in the Haber-Bosch process.

  5. Meteorite Impact-Induced Rapid NH3 Production on Early Earth: Ab Initio Molecular Dynamics Simulation

    Science.gov (United States)

    Shimamura, Kohei; Shimojo, Fuyuki; Nakano, Aiichiro; Tanaka, Shigenori

    2016-01-01

    NH3 is an essential molecule as a nitrogen source for prebiotic amino acid syntheses such as the Strecker reaction. Previous shock experiments demonstrated that meteorite impacts on ancient oceans would have provided a considerable amount of NH3 from atmospheric N2 and oceanic H2O through reduction by meteoritic iron. However, specific production mechanisms remain unclear, and impact velocities employed in the experiments were substantially lower than typical impact velocities of meteorites on the early Earth. Here, to investigate the issues from the atomistic viewpoint, we performed multi-scale shock technique-based ab initio molecular dynamics simulations. The results revealed a rapid production of NH3 within several picoseconds after the shock, indicating that shocks with greater impact velocities would provide further increase in the yield of NH3. Meanwhile, the picosecond-order production makes one expect that the important nitrogen source precursors of amino acids were obtained immediately after the impact. It was also observed that the reduction of N2 proceeded according to an associative mechanism, rather than a dissociative mechanism as in the Haber-Bosch process. PMID:27966594

  6. Non-Adiabatic Molecular Dynamics Methods for Materials Discovery

    Energy Technology Data Exchange (ETDEWEB)

    Furche, Filipp [Univ. of California, Irvine, CA (United States); Parker, Shane M. [Univ. of California, Irvine, CA (United States); Muuronen, Mikko J. [Univ. of California, Irvine, CA (United States); Roy, Saswata [Univ. of California, Irvine, CA (United States)

    2017-04-04

    The flow of radiative energy in light-driven materials such as photosensitizer dyes or photocatalysts is governed by non-adiabatic transitions between electronic states and cannot be described within the Born-Oppenheimer approximation commonly used in electronic structure theory. The non-adiabatic molecular dynamics (NAMD) methods based on Tully surface hopping and time-dependent density functional theory developed in this project have greatly extended the range of molecular materials that can be tackled by NAMD simulations. New algorithms to compute molecular excited state and response properties efficiently were developed. Fundamental limitations of common non-linear response methods were discovered and characterized. Methods for accurate computations of vibronic spectra of materials such as black absorbers were developed and applied. It was shown that open-shell TDDFT methods capture bond breaking in NAMD simulations, a longstanding challenge for single-reference molecular dynamics simulations. The methods developed in this project were applied to study the photodissociation of acetaldehyde and revealed that non-adiabatic effects are experimentally observable in fragment kinetic energy distributions. Finally, the project enabled the first detailed NAMD simulations of photocatalytic water oxidation by titania nanoclusters, uncovering the mechanism of this fundamentally important reaction for fuel generation and storage.

  7. Pyrosequencing for rapid molecular identification of Schistosoma japonicum and S. mekongi eggs and cercariae.

    Science.gov (United States)

    Thanchomnang, Tongjit; Tantrawatpan, Chairat; Intapan, Pewpan M; Sri-Aroon, Pusadee; Limpanont, Yanin; Lulitanond, Viraphong; Janwan, Penchom; Sanpool, Oranuch; Tourtip, Somjintana; Maleewong, Wanchai

    2013-09-01

    Schistosomiasis, which is caused by Schistosoma japonicum and S. mekongi, is a chronic and dangerous widespread disease affecting several countries in Asia. Differentiation between S. japonicum and S. mekongi eggs and/or cercariae via microscopic examination is difficult due to morphological similarities. It is important to identify these etiological agents isolated from animals and humans at the species or genotype level. In this study, a pyrosequencing assay designed to detect S. japonicum and S. mekongi DNA in fecal samples and infected snails was developed and evaluated as an alternative tool to diagnose schistosomiasis. New primers targeting the 18S ribosomal RNA gene were designated for specific amplification. S. japonicum and S. mekongi were identified using a 43-nucleotide pattern of the 18S ribosomal RNA gene and were differentiated using 7 nucleotides within this region. S. japonicum and S. mekongi-infected snails and fecal samples derived from infected mice and rats were differentially detected within a short period of time. The analytical sensitivity of the method enabled the identification of as little as a single cercaria artificially introduced into a pool of 10 non-infected snails and 2 eggs inoculated in 100mg of non-infected fecal sample. To evaluate the comparative efficacy of the assay, identical samples were also analyzed via microscopy and Sanger sequencing. The pyrosequencing technique was found to be superior to the microscopy method and more rapid than the Sanger sequencing method. These results suggest that the pyrosequencing assay is rapid, simple, sensitive and accurate in identifying S. japonicum and S. mekongi in intermediate hosts and fecal samples of the final host. Copyright © 2013 Elsevier Inc. All rights reserved.

  8. Rapid methods for the detection of foodborne bacterial pathogens: principles, applications, advantages and limitations

    Science.gov (United States)

    Law, Jodi Woan-Fei; Ab Mutalib, Nurul-Syakima; Chan, Kok-Gan; Lee, Learn-Han

    2015-01-01

    The incidence of foodborne diseases has increased over the years and resulted in major public health problem globally. Foodborne pathogens can be found in various foods and it is important to detect foodborne pathogens to provide safe food supply and to prevent foodborne diseases. The conventional methods used to detect foodborne pathogen are time consuming and laborious. Hence, a variety of methods have been developed for rapid detection of foodborne pathogens as it is required in many food analyses. Rapid detection methods can be categorized into nucleic acid-based, biosensor-based and immunological-based methods. This review emphasizes on the principles and application of recent rapid methods for the detection of foodborne bacterial pathogens. Detection methods included are simple polymerase chain reaction (PCR), multiplex PCR, real-time PCR, nucleic acid sequence-based amplification (NASBA), loop-mediated isothermal amplification (LAMP) and oligonucleotide DNA microarray which classified as nucleic acid-based methods; optical, electrochemical and mass-based biosensors which classified as biosensor-based methods; enzyme-linked immunosorbent assay (ELISA) and lateral flow immunoassay which classified as immunological-based methods. In general, rapid detection methods are generally time-efficient, sensitive, specific and labor-saving. The developments of rapid detection methods are vital in prevention and treatment of foodborne diseases. PMID:25628612

  9. Rapid Methods for the Detection of Foodborne Bacterial Pathogens: Principles, Applications, Advantages and Limitations

    Directory of Open Access Journals (Sweden)

    Law eJodi Woan-Fei

    2015-01-01

    Full Text Available The incidence of foodborne diseases has increased over the years and resulted in major public health problem globally. Foodborne pathogens can be found in various foods and it is important to detect foodborne pathogens to provide safe food supply and to prevent foodborne diseases. The conventional methods used to detect foodborne pathogen are time consuming and laborious. Hence, a variety of methods have been developed for rapid detection of foodborne pathogens as it is required in many food analyses. Rapid detection methods can be categorized into nucleic acid-based, biosensor-based and immunological-based methods. This review emphasizes on the principles and application of recent rapid methods for the detection of foodborne bacterial pathogens. Detection methods included are simple polymerase chain reaction (PCR, multiplex PCR, real-time PCR, nucleic acid sequence-based amplification (NASBA, loop-mediated isothermal amplification (LAMP and oligonucleotide DNA microarray which classified as nucleic acid-based methods; optical, electrochemical and mass-based biosensors which classified as biosensor-based methods; enzyme-linked immunosorbent assay (ELISA and lateral flow immunoassay which classified as immunological-based methods. In general, rapid detection methods are generally time-efficient, sensitive, specific and labor-saving. The developments of rapid detection methods are vital in prevention and treatment of foodborne diseases.

  10. Molecular methods for microbiological quality control of meat and meat products: a review.

    Science.gov (United States)

    Gokulakrishnan, P; Vergis, Jess

    2015-01-01

    Achieving food safety is a global health goal and the food-borne diseases take a major check on global health. Therefore, detection of microbial pathogens in food is the solution to the prevention and recognition of problems related to health and safety. Conventional and standard bacterial detection methods such as culture and colony counting methods and immunology-based methods may take up to several hours or even a few days to yield a result. Obviously, this is inadequate, and recently many researchers are focusing towards the progress of rapid diagnostic methods. The advent of molecular techniques has led to the development of a diverse array of assay for quality control of meat and meat products. Rapid analysis using DNA hybridization and amplification techniques offer more sensitivity and specificity to get results than culture based methods as well as dramatic reduction in the time to get results. Many methods have also achieved the high level automation, facilitating their application as routine sample screening assays. This review is intended to provide an overview of the molecular methods for microbiological quality control of meat and meat products.

  11. Rapid molecular cytogenetic analysis of X-chromosomal microdeletions: Fluorescence in situ hybridization (FISH) for complex glycerol kinase deficiency

    Energy Technology Data Exchange (ETDEWEB)

    Worley, K.C.; Lindsay, E.A.; McCabe, E.R.B. [Baylor College of Medicine, Houston, TX (United States)] [and others

    1995-07-17

    Diagnosis of X-chromosomal microdeletions has relied upon the traditional methods of Southern blotting and DNA amplification, with carrier identification requiring time-consuming and unreliable dosage calculations. In this report, we describe rapid molecular cytogenetic identification of deleted DNA in affected males with the Xp21 contiguous gene syndrome (complex glycerol kinase deficiency, CGKD) and female carriers for this disorder. CGKD deletions involve the genes for glycerol kinase, Duchenne muscular dystrophy, and/or adrenal hypoplasia congenita. We report an improved method for diagnosis of deletions in individuals with CGKD and for identification of female carriers within their families using fluorescence in situ hybridization (FISH) with a cosmid marker (cosmid 35) within the glycerol kinase gene. When used in combination with an Xq control probe, affected males demonstrate a single signal from the control probe, while female carriers demonstrate a normal chromosome with two signals, as well as a deleted chromosome with a single signal from the control probe. FISH analysis for CGKD provides the advantages of speed and accuracy for evaluation of submicroscopic X-chromosome deletions, particularly in identification of female carriers. In addition to improving carrier evaluation, FISH will make prenatal diagnosis of CGKD more readily available. 17 refs., 2 figs.

  12. Comparing culture and molecular methods for the identification of microorganisms involved in necrotizing soft tissue infections.

    Science.gov (United States)

    Rudkjøbing, Vibeke Børsholt; Thomsen, Trine Rolighed; Xu, Yijuan; Melton-Kreft, Rachael; Ahmed, Azad; Eickhardt, Steffen; Bjarnsholt, Thomas; Poulsen, Steen Seier; Nielsen, Per Halkjær; Earl, Joshua P; Ehrlich, Garth D; Moser, Claus

    2016-11-08

    Necrotizing soft tissue infections (NSTIs) are a group of infections affecting all soft tissues. NSTI involves necrosis of the afflicted tissue and is potentially life threatening due to major and rapid destruction of tissue, which often leads to septic shock and organ failure. The gold standard for identification of pathogens is culture; however molecular methods for identification of microorganisms may provide a more rapid result and may be able to identify additional microorganisms that are not detected by culture. In this study, tissue samples (n = 20) obtained after debridement of 10 patients with NSTI were analyzed by standard culture, fluorescence in situ hybridization (FISH) and multiple molecular methods. The molecular methods included analysis of microbial diversity by 1) direct 16S and D2LSU rRNA gene Microseq 2) construction of near full-length 16S rRNA gene clone libraries with subsequent Sanger sequencing for most samples, 3) the Ibis T5000 biosensor and 4) 454-based pyrosequencing. Furthermore, quantitative PCR (qPCR) was used to verify and determine the relative abundance of Streptococcus pyogenes in samples. For 70 % of the surgical samples it was possible to identify microorganisms by culture. Some samples did not result in growth (presumably due to administration of antimicrobial therapy prior to sampling). The molecular methods identified microorganisms in 90 % of the samples, and frequently detected additional microorganisms when compared to culture. Although the molecular methods generally gave concordant results, our results indicate that Microseq may misidentify or overlook microorganisms that can be detected by other molecular methods. Half of the patients were found to be infected with S. pyogenes, but several atypical findings were also made including infection by a) Acinetobacter baumannii, b) Streptococcus pneumoniae, and c) fungi, mycoplasma and Fusobacterium necrophorum. The study emphasizes that many pathogens can be involved

  13. A Simple and Rapid Method for Preparing a Cell-Free Bacterial Lysate for Protein Synthesis.

    Directory of Open Access Journals (Sweden)

    Nitzan Krinsky

    Full Text Available Cell-free protein synthesis (CFPS systems are important laboratory tools that are used for various synthetic biology applications. Here, we present a simple and inexpensive laboratory-scale method for preparing a CFPS system from E. coli. The procedure uses basic lab equipment, a minimal set of reagents, and requires less than one hour to process the bacterial cell mass into a functional S30-T7 extract. BL21(DE3 and MRE600 E. coli strains were used to prepare the S30-T7 extract. The CFPS system was used to produce a set of fluorescent and therapeutic proteins of different molecular weights (up to 66 kDa. This system was able to produce 40-150 μg-protein/ml, with variations depending on the plasmid type, expressed protein and E. coli strain. Interestingly, the BL21-based CFPS exhibited stability and increased activity at 40 and 45°C. To the best of our knowledge, this is the most rapid and affordable lab-scale protocol for preparing a cell-free protein synthesis system, with high thermal stability and efficacy in producing therapeutic proteins.

  14. Sponge cell culture? A molecular identification method for sponge cells

    NARCIS (Netherlands)

    Sipkema, D.; Heilig, G.H.J.; Akkermans, A.D.L.; Osinga, R.; Tramper, J.; Wijffels, R.H.

    2003-01-01

    Dissociated sponge cells are easily confused with unicellular organisms. This has been an obstacle in the development of sponge-cell lines. We developed a molecular detection method to identify cells of the sponge Dysidea avara in dissociated cell cultures. The 18S ribosomal RNA gene from a Dysidea

  15. A discussion of molecular biology methods for protein engineering

    CSIR Research Space (South Africa)

    Zawaira, A

    2011-09-01

    Full Text Available A number of molecular biology techniques are available to generate variants from a particular start gene for eventual protein expression. The authors discuss the basic principles of these methods in a repertoire that may be used to achieve...

  16. Mapping enzymatic catalysis using the effective fragment molecular orbital method

    DEFF Research Database (Denmark)

    Svendsen, Casper Steinmann; Fedorov, Dmitri G.; Jensen, Jan Halborg

    2013-01-01

    We extend the Effective Fragment Molecular Orbital (EFMO) method to the frozen domain approach where only the geometry of an active part is optimized, while the many-body polarization effects are considered for the whole system. The new approach efficiently mapped out the entire reaction path of ...

  17. A comparative study of molecular and morphological methods of ...

    African Journals Online (AJOL)

    A comparative study of molecular and morphological methods of describing genetic relationships in traditional Ethiopian highland maize. ... This information will be useful for collections, conservation and various breeding programs in the highlands of Ethiopia. African Journal of Biotechnology Vol. 4 (7), pp. 586-595, 2005 ...

  18. Comparison of traditional physico-chemical methods and molecular ...

    African Journals Online (AJOL)

    This study was aim to review the efficiency of molecular markers and traditional physico-chemical methods for the identification of basmati rice. The study involved 44 promising varieties of Indica rices collected from geographically distant places and adapted to irrigated and aerobic agro-ecosystems. Quality data for ...

  19. CULTURE-INDEPENDENT MOLECULAR METHODS FOR FECAL SOURCE IDENTIFICATION

    Science.gov (United States)

    Fecal contamination is widespread in the waterways of the United States. Both to correct the problem, and to estimate public health risk, it is necessary to identify the source of the contamination. Several culture-independent molecular methods for fecal source identification hav...

  20. Fragrance analysis using molecular and biochemical methods in ...

    African Journals Online (AJOL)

    For molecular and biochemical analysis of aroma, a mapping population comprising 208 recombinant inbred lines (RILs) derived from a diverse cross between CSR10 and Taraori Basmati through Single seed descent (SSD) method was used. RILs are among the best mapping populations, which provide a novel material ...

  1. Methods and Magnitudes of Rapid Weight Loss in Judo Athletes Over Pre-Competition Periods

    Directory of Open Access Journals (Sweden)

    Kons Rafael Lima

    2017-06-01

    Full Text Available Purpose. The study aimed to analyse the methods and magnitudes of rapid weight loss (RWL in judo team members in distinct periods before the biggest state competition in Southern Brazil.

  2. Comparing culture and molecular methods for the identification of microorganisms involved in necrotizing soft tissue infections

    DEFF Research Database (Denmark)

    Rudkjøbing, Vibeke Børsholt; Thomsen, Trine Rolighed; Xu, Yijuan

    2016-01-01

    BACKGROUND: Necrotizing soft tissue infections (NSTIs) are a group of infections affecting all soft tissues. NSTI involves necrosis of the afflicted tissue and is potentially life threatening due to major and rapid destruction of tissue, which often leads to septic shock and organ failure. The gold...... that clinicians should be prepared to diagnose and treat any combination of microbial pathogens. Some of the tested molecular methods offer a faster turnaround time combined with a high specificity, which makes supplemental use of such methods attractive for identification of microorganisms, especially...

  3. Rapid and sensitive detection of rotavirus molecular signatures using surface enhanced Raman spectroscopy.

    Directory of Open Access Journals (Sweden)

    Jeremy D Driskell

    Full Text Available Human enteric virus infections range from gastroenteritis to life threatening diseases such as myocarditis and aseptic meningitis. Rotavirus is one of the most common enteric agents and mortality associated with infection can be very significant in developing countries. Most enteric viruses produce diseases that are not distinct from other pathogens, and current diagnostics is limited in breadth and sensitivity required to advance virus detection schemes for disease intervention strategies. A spectroscopic assay based on surface enhanced Raman scattering (SERS has been developed for rapid and sensitive detection of rotavirus. The SERS method relies on the fabrication of silver nanorod array substrates that are extremely SERS-active allowing for direct structural characterization of viruses. SERS spectra for eight rotavirus strains were analyzed to qualitatively identify rotaviruses and to classify each according to G and P genotype and strain with >96% accuracy, and a quantitative model based on partial least squares regression analysis was evaluated. This novel SERS-based virus detection method shows that SERS can be used to identify spectral fingerprints of human rotaviruses, and suggests that this detection method can be used for pathogen detection central to human health care.

  4. Development of a Multiplex PCR Assay for Rapid Molecular Serotyping of Haemophilus parasuis

    Science.gov (United States)

    Peters, Sarah E.; Wang, Jinhong; Hernandez-Garcia, Juan; Weinert, Lucy A.; Luan, Shi-Lu; Chaudhuri, Roy R.; Angen, Øystein; Aragon, Virginia; Williamson, Susanna M.; Langford, Paul R.; Rycroft, Andrew N.; Wren, Brendan W.; Maskell, Duncan J.; Tucker, Alexander W.

    2015-01-01

    Haemophilus parasuis causes Glässer's disease and pneumonia in pigs. Indirect hemagglutination (IHA) is typically used to serotype this bacterium, distinguishing 15 serovars with some nontypeable isolates. The capsule loci of the 15 reference strains have been annotated, and significant genetic variation was identified between serovars, with the exception of serovars 5 and 12. A capsule locus and in silico serovar were identified for all but two nontypeable isolates in our collection of >200 isolates. Here, we describe the development of a multiplex PCR, based on variation within the capsule loci of the 15 serovars of H. parasuis, for rapid molecular serotyping. The multiplex PCR (mPCR) distinguished between all previously described serovars except 5 and 12, which were detected by the same pair of primers. The detection limit of the mPCR was 4.29 × 105 ng/μl bacterial genomic DNA, and high specificity was indicated by the absence of reactivity against closely related commensal Pasteurellaceae and other bacterial pathogens of pigs. A subset of 150 isolates from a previously sequenced H. parasuis collection was used to validate the mPCR with 100% accuracy compared to the in silico results. In addition, the two in silico-nontypeable isolates were typeable using the mPCR. A further 84 isolates were analyzed by mPCR and compared to the IHA serotyping results with 90% concordance (excluding those that were nontypeable by IHA). The mPCR was faster, more sensitive, and more specific than IHA, enabling the differentiation of 14 of the 15 serovars of H. parasuis. PMID:26424843

  5. Rapid identification of salmonella serotypes with stereo and hyperspectral microscope imaging Methods

    Science.gov (United States)

    The hyperspectral microscope imaging (HMI) method can reduce detection time within 8 hours including incubation process. The early and rapid detection with this method in conjunction with the high throughput capabilities makes HMI method a prime candidate for implementation for the food industry. Th...

  6. Experimental methods of molecular matter-wave optics.

    Science.gov (United States)

    Juffmann, Thomas; Ulbricht, Hendrik; Arndt, Markus

    2013-08-01

    We describe the state of the art in preparing, manipulating and detecting coherent molecular matter. We focus on experimental methods for handling the quantum motion of compound systems from diatomic molecules to clusters or biomolecules.Molecular quantum optics offers many challenges and innovative prospects: already the combination of two atoms into one molecule takes several well-established methods from atomic physics, such as for instance laser cooling, to their limits. The enormous internal complexity that arises when hundreds or thousands of atoms are bound in a single organic molecule, cluster or nanocrystal provides a richness that can only be tackled by combining methods from atomic physics, chemistry, cluster physics, nanotechnology and the life sciences.We review various molecular beam sources and their suitability for matter-wave experiments. We discuss numerous molecular detection schemes and give an overview over diffraction and interference experiments that have already been performed with molecules or clusters.Applications of de Broglie studies with composite systems range from fundamental tests of physics up to quantum-enhanced metrology in physical chemistry, biophysics and the surface sciences.Nanoparticle quantum optics is a growing field, which will intrigue researchers still for many years to come. This review can, therefore, only be a snapshot of a very dynamical process.

  7. Experimental methods of molecular matter-wave optics

    Science.gov (United States)

    Juffmann, Thomas; Ulbricht, Hendrik; Arndt, Markus

    2013-08-01

    We describe the state of the art in preparing, manipulating and detecting coherent molecular matter. We focus on experimental methods for handling the quantum motion of compound systems from diatomic molecules to clusters or biomolecules. Molecular quantum optics offers many challenges and innovative prospects: already the combination of two atoms into one molecule takes several well-established methods from atomic physics, such as for instance laser cooling, to their limits. The enormous internal complexity that arises when hundreds or thousands of atoms are bound in a single organic molecule, cluster or nanocrystal provides a richness that can only be tackled by combining methods from atomic physics, chemistry, cluster physics, nanotechnology and the life sciences. We review various molecular beam sources and their suitability for matter-wave experiments. We discuss numerous molecular detection schemes and give an overview over diffraction and interference experiments that have already been performed with molecules or clusters. Applications of de Broglie studies with composite systems range from fundamental tests of physics up to quantum-enhanced metrology in physical chemistry, biophysics and the surface sciences. Nanoparticle quantum optics is a growing field, which will intrigue researchers still for many years to come. This review can, therefore, only be a snapshot of a very dynamical process.

  8. Next-Generation Sequencing-Aided Rapid Molecular Diagnosis of Occult Macular Dystrophy in a Chinese Family

    Directory of Open Access Journals (Sweden)

    Yu-He Qi

    2017-08-01

    Full Text Available Purpose: To show early, rapid and accurate molecular diagnosis of occult macular dystrophy (OMD in a four-generation Chinese family with inherited macular dystrophy.Methods: In the current study, we comprehensively screened 130 genes involved in common inherited non-syndromic eye diseases with next-generation sequencing-based target capture sequencing of the proband of a four-generation Chinese family that has suffered from maculopathy without a definitive diagnosis for over 10 years. Variants were filtered and analyzed to identify possible disease-causing variants before validation by Sanger sequencing.Results: Two heterozygous mutations—RP1L1 c.133 C > T (p.Arg45Trp, which is a hot spot for OMD, and ABCA4 c.6119 G > A (p.Arg2040Gln, which was identified in Stargardt’s disease were found in three patients, but neither of the mutations was found in the unaffected individuals in the same family, who are phenotypically normal or in the normal control volunteers.Conclusion: These results cannot only confirm the diagnosis of OMD in the proband, but also provide presymptomatic diagnosis of the proband’s children before the onset of visual acuity impairment and guidance regarding the prognosis and management of these patients. Heterozygous mutations of RP1L1 c.133 C > T (p.Arg45Trp and ABCA4 c.6119 G > A (p.Arg2040Gln are likely responsible for OMD. Our results further extend our current understanding of the genetic basis of OMD, and emphasize the importance of molecular diagnosis and genetic counseling for OMD.

  9. Next-Generation Sequencing-Aided Rapid Molecular Diagnosis of Occult Macular Dystrophy in a Chinese Family.

    Science.gov (United States)

    Qi, Yu-He; Gao, Feng-Juan; Hu, Fang-Yuan; Zhang, Sheng-Hai; Chen, Jun-Yi; Huang, Wan-Jing; Tian, Guo-Hong; Wang, Min; Gan, De-Kang; Wu, Ji-Hong; Xu, Ge-Zhi

    2017-01-01

    Purpose: To show early, rapid and accurate molecular diagnosis of occult macular dystrophy (OMD) in a four-generation Chinese family with inherited macular dystrophy. Methods: In the current study, we comprehensively screened 130 genes involved in common inherited non-syndromic eye diseases with next-generation sequencing-based target capture sequencing of the proband of a four-generation Chinese family that has suffered from maculopathy without a definitive diagnosis for over 10 years. Variants were filtered and analyzed to identify possible disease-causing variants before validation by Sanger sequencing. Results: Two heterozygous mutations-RP1L1 c.133 C > T (p.Arg45Trp), which is a hot spot for OMD, and ABCA4 c.6119 G > A (p.Arg2040Gln), which was identified in Stargardt's disease were found in three patients, but neither of the mutations was found in the unaffected individuals in the same family, who are phenotypically normal or in the normal control volunteers. Conclusion: These results cannot only confirm the diagnosis of OMD in the proband, but also provide presymptomatic diagnosis of the proband's children before the onset of visual acuity impairment and guidance regarding the prognosis and management of these patients. Heterozygous mutations of RP1L1 c.133 C > T (p.Arg45Trp) and ABCA4 c.6119 G > A (p.Arg2040Gln) are likely responsible for OMD. Our results further extend our current understanding of the genetic basis of OMD, and emphasize the importance of molecular diagnosis and genetic counseling for OMD.

  10. Development of molecular imaging method for manitoring estrogen receptor activity

    Energy Technology Data Exchange (ETDEWEB)

    Jung, W. S.; Jung, J. G.; Kang, J. H.; Lee, Y. J.; Kim, K. I.; O, H. J.; Jung, J. M.; Lee, D. S.; Lee, M. C. [Seoul Nation University, Seoul (Korea, Republic of)

    2004-07-01

    Estrogen receptor is expressed in 50-60% of the breast cancer and hormone therapy is effective for only ER-positive breast cancer. Therefore, we need to know whether or not the ER is expressed in breast cancer before hormone therapy. So far, the method for monitoring ER positiveness in breast tissue is radioreceptor assay or immunohistochemistry which is invasive method due to tissue biopsy. In this study, we develop the molecular imaging method of sodium iodide symporter (NIS) gene as a reporter gene for monitoring ER activity. Because molecular imaging is evaluation method through the comparison between the image intensities obtained in vivo, molecular imaging method is noninvasive and easily quantitative. We constructed the recombinant plasmid (pERE-NIS) which NIS gene expression is controlled by estrogen response element (ERE) promoter. MCF-7, ER-expressing human breast cancer cell line, was transfected with pERE-NIS with lipofectamine (Invitrogen Co). When pERE-NIS transfected MCF-7 was treated with estradiol or tamoxifen, intracellular uptake of {sup 125}I was higher than those of non-treated. The activation of ERE by drug treatment was occurred and it was caused to expression of NIS gene. The degree of {sup 125}I uptake depend on treated drug concentration. However, in case of pERE-NIS transfected breast cancer which do not express ER, there was no response with drug treatment. Therefore, we can monitor ER functionality and the efficacy of drugs with this pERE-NIS reporter system.

  11. Assessment of three rapid methods for the detection of methicillin-resistant Staphylococcus aureus.

    Science.gov (United States)

    Soares, Maria João; Soares, Carlos; Mendes, Ana Constança; Guimarães, Maria Luís; Cabeda, José Manuel; Amorim, José Manuel

    2004-01-01

    We evaluated three rapid methods to detect methicillin-resistant Staphylococcus aureus (MRSA) and compared them with PCR amplification of mecA. A total of 103 S. aureus strains were studied by MRSA-Screen, BBL Crystal, Velogene Genomic and mecA PCR. All the methods detected the 61 MRSA strains having the mecA gene, showing 100% sensitivity and specificity. Despite the correlation between all the rapid methods and PCR, the ease of use and shorter turnaround time of MRSA-Screen were important factors leading to the selection of this method as the routine screening technique for MRSA.

  12. Advanced molecular dynamics simulation methods for kinase drug discovery.

    Science.gov (United States)

    Aci-Sèche, Samia; Ziada, Sonia; Braka, Abdennour; Arora, Rohit; Bonnet, Pascal

    2016-04-01

    Interest in the application of molecular dynamics (MD) simulations has increased in the field of protein kinase (PK) drug discovery. PKs belong to an important drug target class because they are directly involved in a number of diseases, including cancer. MD methods simulate dynamic biological and chemical events at an atomic level. This information can be combined with other in silico and experimental methods to efficiently target selected receptors. In this review, we present common and advanced methods of MD simulations and we focus on the recent applications of MD-based methodologies that provided significant insights into the elucidation of biological mechanisms involving PKs and into the discovery of novel kinase inhibitors.

  13. A systematic molecular circuit design method for gene networks under biochemical time delays and molecular noises

    Directory of Open Access Journals (Sweden)

    Chang Yu-Te

    2008-11-01

    Full Text Available Abstract Background Gene networks in nanoscale are of nonlinear stochastic process. Time delays are common and substantial in these biochemical processes due to gene transcription, translation, posttranslation protein modification and diffusion. Molecular noises in gene networks come from intrinsic fluctuations, transmitted noise from upstream genes, and the global noise affecting all genes. Knowledge of molecular noise filtering and biochemical process delay compensation in gene networks is crucial to understand the signal processing in gene networks and the design of noise-tolerant and delay-robust gene circuits for synthetic biology. Results A nonlinear stochastic dynamic model with multiple time delays is proposed for describing a gene network under process delays, intrinsic molecular fluctuations, and extrinsic molecular noises. Then, the stochastic biochemical processing scheme of gene regulatory networks for attenuating these molecular noises and compensating process delays is investigated from the nonlinear signal processing perspective. In order to improve the robust stability for delay toleration and noise filtering, a robust gene circuit for nonlinear stochastic time-delay gene networks is engineered based on the nonlinear robust H∞ stochastic filtering scheme. Further, in order to avoid solving these complicated noise-tolerant and delay-robust design problems, based on Takagi-Sugeno (T-S fuzzy time-delay model and linear matrix inequalities (LMIs technique, a systematic gene circuit design method is proposed to simplify the design procedure. Conclusion The proposed gene circuit design method has much potential for application to systems biology, synthetic biology and drug design when a gene regulatory network has to be designed for improving its robust stability and filtering ability of disease-perturbed gene network or when a synthetic gene network needs to perform robustly under process delays and molecular noises.

  14. The scope of application of incremental rapid prototyping methods in foundry engineering

    Directory of Open Access Journals (Sweden)

    M. Stankiewicz

    2010-01-01

    Full Text Available The article presents the scope of application of selected incremental Rapid Prototyping methods in the process of manufacturing casting models, casting moulds and casts. The Rapid Prototyping methods (SL, SLA, FDM, 3DP, JS are predominantly used for the production of models and model sets for casting moulds. The Rapid Tooling methods, such as: ZCast-3DP, ProMetalRCT and VoxelJet, enable the fabrication of casting moulds in the incremental process. The application of the RP methods in cast production makes it possible to speed up the prototype preparation process. This is particularly vital to elements of complex shapes. The time required for the manufacture of the model, the mould and the cast proper may vary from a few to several dozen hours.

  15. Structure prediction of subtilisin BPN' mutants using molecular dynamics methods

    OpenAIRE

    Heiner, Andreas P.; Berendsen, Herman J.C.; van Gunsteren, Wilfred F.

    2017-01-01

    In this paper we describe the achievements and pitfalls encountered in doing structure predictions of protein mutants using molecular dynamics simulation techniques in which properties of atoms are slowly changed as a function of time. Basically the method consists of a thermodynamic integration (slow growth) calculation used for free energy determination, but aimed at structure prediction; this allows for a fast determination of the mutant structure. We compared the calculated structure of t...

  16. A discussion of molecular biology methods for protein engineering.

    Science.gov (United States)

    Zawaira, Alexander; Pooran, Anil; Barichievy, Samantha; Chopera, Denis

    2012-05-01

    A number of molecular biology techniques are available to generate variants from a particular start gene for eventual protein expression. We discuss the basic principles of these methods in a repertoire that may be used to achieve the elemental steps in protein engineering. These include site-directed, deletion and insertion mutagenesis. We provide detailed case studies, drawn from our own experiences, packaged together with conceptual discussions and include an analysis of the techniques presented with regards to their uses in protein engineering.

  17. Solving a molecular docking problem by the modified PSO method

    Directory of Open Access Journals (Sweden)

    A. P. Karpenko

    2014-01-01

    Full Text Available The paper presents an canonical method of the swarm particles in two modifications to raise this method efficiency in solving multi-extreme problems of high dimension optimization. The essence of PSO-M1 modification is to form two new points to attract swarm particles (along with the points which are responsible for inertial, cognitive, and social components of canonical method. These new points represent the best points of sets of particles-neighbours of a given point. The modification aims to diversify search. All free parameters of the PSO-M1 method (as well as an canonical method are static. In contrast, one of such parameters of PSO-M2 modification is dynamic. So this modification represents an example of a self-adaptive method of optimization. The modification aims to intensify search. A computing experiment to study the method efficiency and its abovementioned modifications at solving the test problems of optimization showed advantages of offered modifications in comparison with canonical method, revealed a superiority of PSO-M2 modification both over canonical method, and over PSO-M1 modification. Using the PSO-M2 method allows us to solve the 28-dimensional molecular docking problem of HIV1 protease and darunaviry 3U7S as the molecules of receptor and a ligand, respectively. Results of computing experiment have shown that the PSO-M2 method successfully finds the position of ligand close to native and can be recommended for solving the molecular docking problems as an alternative to genetic algorithm.

  18. Workshop on molecular methods for genetic diagnosis. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Rinchik, E.M.

    1997-07-01

    The Sarah Lawrence College Human Genetics Program received Department of Energy funding to offer a continuing medical education workshop for genetic counselors in the New York metropolitan area. According to statistics from the National Society of Genetic Counselors, there are approximately 160 genetic counselors working in the tri-state area (New York, New Jersey, and Connecticut), and many of them had been working in the field for more than 10 years. Thus, there was a real need to offer these counselors an in-depth opportunity to learn the specifics of the major advances in molecular genetics, and, in particular, the new approaches to diagnostic testing for genetic disease. As a result of the DOE Award DE-FG02-95ER62048 ($20,583), in July 1995 we offered the {open_quotes}Workshop on Molecular Methods for Genetic Diagnosis{close_quotes} for 24 genetic counselors in the New York metropolitan area. The workshop included an initial review session on the basics of molecular biology, lectures and discussions on past and current topics in molecular genetics and diagnostic procedures, and, importantly, daily laboratory exercises. Each counselor gained not only background, but also firsthand experience, in the major techniques of biochemical and molecular methods for diagnosing genetic diseases as well as in mathematical and computational techniques involved in human genetics analyses. Our goal in offering this workshop was not to make genetic counselors experts in these laboratory diagnostic techniques, but to acquaint them, by hands-on experience, about some of the techniques currently in use. We also wanted to provide them a technical foundation upon which they can understand and appreciate new technical developments arising in the near future.

  19. Evaluation of two methods of rapid blood-glucose monitoring by unskilled personnel during surgery

    DEFF Research Database (Denmark)

    Madsbad, S; Adelhøj, B; Bigler, Dennis Richard

    1984-01-01

    The accuracy of two rapid methods of blood-glucose monitoring without (Haemo-glucotest 1-44) and with a reflectance meter (Hypocount B) was compared using a laboratory method. The assessment was carried out by personnel with no previous experience in measuring blood glucose. Eighty-five percent o...

  20. A rapid and convenient method for preparing salt-free (. gamma. -/sup 32/P)ATP

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, J.L.; Avruch, J.

    1981-09-15

    (..gamma..-/sup 32/P)ATP is prepared by an existing enzymatic method that yields approximately 95% incorporation of /sup 32/P into ATP. A rapid and convenient method for purifying the (..gamma..-/sup 32/P)ATP which results in a product free of both salt and buffer is reported.

  1. High performance liquid chromatography method for rapid and accurate determination of homocysteine in plasma and serum

    DEFF Research Database (Denmark)

    Vester, Birte; Rasmussen, K

    1991-01-01

    Determination of homocysteine in plasma or serum for evaluation of cobalamin and folate deficiency is becoming an important diagnostic procedure. Accurate, rapid and low cost methods for measuring homocysteine are therefore required. We have improved an HPLC method and made it suitable for clinical...

  2. A rapid method to determine sterol, erythrodiol, and uvaol concentrations in olive oil.

    Science.gov (United States)

    Mathison, Brian; Holstege, Dirk

    2013-05-15

    A rapid, accurate, and efficient method for determining the sterol, uvaol, and erythrodiol concentrations was developed to meet International Olive Council (IOC) certification criteria for extra virgin olive oil (EVOO). The unsaponifiable fraction of the sample (0.2 g) was separated with a diatomaceous earth column, and the sterol and triterpenic dialcohols were isolated with a novel base-activated silica solid-phase extraction (SPE) cartridge cleanup protocol. The improved method and the IOC method provided identical pass/fail results (n = 34) for each of the six sterol and erythrodiol/uvaol IOC criteria used to assess olive oil. This method was validated, and recoveries of stigmasterol (88%) and β-sitosterol (84%) were greater than previously published values obtained using the IOC method. This method requires approximately one-third the time required to complete the IOC method and has great utility for the rapid screening of EVOO to detect adulteration, false labeling, and an inferior product.

  3. Rapid detection of coliforms in drinking water of Arak city using multiplex PCR method in comparison with the standard method of culture (Most Probably Number)

    Science.gov (United States)

    Fatemeh, Dehghan; Reza, Zolfaghari Mohammad; Mohammad, Arjomandzadegan; Salomeh, Kalantari; Reza, Ahmari Gholam; Hossein, Sarmadian; Maryam, Sadrnia; Azam, Ahmadi; Mana, Shojapoor; Negin, Najarian; Reza, Kasravi Alii; Saeed, Falahat

    2014-01-01

    Objective To analyse molecular detection of coliforms and shorten the time of PCR. Methods Rapid detection of coliforms by amplification of lacZ and uidA genes in a multiplex PCR reaction was designed and performed in comparison with most probably number (MPN) method for 16 artificial and 101 field samples. The molecular method was also conducted on isolated coliforms from positive MPN samples; standard sample for verification of microbial method certificated reference material; isolated strains from certificated reference material and standard bacteria. The PCR and electrophoresis parameters were changed for reducing the operation time. Results Results of PCR for lacZ and uidA genes were similar in all of standard, operational and artificial samples and showed the 876 bp and 147 bp bands of lacZ and uidA genes by multiplex PCR. PCR results were confirmed by MPN culture method by sensitivity 86% (95% CI: 0.71-0.93). Also the total execution time, with a successful change of factors, was reduced to less than two and a half hour. Conclusions Multiplex PCR method with shortened operation time was used for the simultaneous detection of total coliforms and Escherichia coli in distribution system of Arak city. It's recommended to be used at least as an initial screening test, and then the positive samples could be randomly tested by MPN. PMID:25182727

  4. Commercially Available Rapid Methods for Detection of Selected Food-borne Pathogens.

    Science.gov (United States)

    Valderrama, Wladir B; Dudley, Edward G; Doores, Stephanie; Cutter, Catherine N

    2016-07-03

    Generally, the enumeration and isolation of food-borne pathogens is performed using culture-dependent methods. These methods are sensitive, inexpensive, and provide both qualitative and quantitative assessment of the microorganisms present in a sample, but these are time-consuming. For this reason, researchers are developing new techniques that allow detection of food pathogens in shorter period of time. This review identifies commercially available methods for rapid detection and quantification of Listeria monocytogenes, Salmonella spp., Staphylococcus aureus, and Shiga toxin-producing Escherichia coli in food samples. Three categories are discussed: immunologically based methods, nucleic acid-based assays, and biosensors. This review describes the basic mechanism and capabilities of each method, discusses the difficulties of choosing the most convenient method, and provides an overview of the future challenges for the technology for rapid detection of microorganisms.

  5. Laplacian manifold regularization method for fluorescence molecular tomography

    Science.gov (United States)

    He, Xuelei; Wang, Xiaodong; Yi, Huangjian; Chen, Yanrong; Zhang, Xu; Yu, Jingjing; He, Xiaowei

    2017-04-01

    Sparse regularization methods have been widely used in fluorescence molecular tomography (FMT) for stable three-dimensional reconstruction. Generally, ℓ1-regularization-based methods allow for utilizing the sparsity nature of the target distribution. However, in addition to sparsity, the spatial structure information should be exploited as well. A joint ℓ1 and Laplacian manifold regularization model is proposed to improve the reconstruction performance, and two algorithms (with and without Barzilai-Borwein strategy) are presented to solve the regularization model. Numerical studies and in vivo experiment demonstrate that the proposed Gradient projection-resolved Laplacian manifold regularization method for the joint model performed better than the comparative algorithm for ℓ1 minimization method in both spatial aggregation and location accuracy.

  6. Rapid high temperature field test method for evaluation of geothermal calcite scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, R.G.

    1982-08-01

    A test method is described which allows the rapid field testing of calcite scale inhibitors in high- temperature geothermal brines. Five commercial formulations, chosen on the basis of laboratory screening tests, were tested in brines with low total dissolved solids at ca 500 F. Four were found to be effective; of these, 2 were found to be capable of removing recently deposited scale. One chemical was tested in the full-flow brine line for 6 wks. It was shown to stop a severe surface scaling problem at the well's control valve, thus proving the viability of the rapid test method. (12 refs.)

  7. Evaluation of Xpert MTB/RIF assay for rapid molecular diagnosis of tuberculosis in a two-year period in Croatia

    Directory of Open Access Journals (Sweden)

    Ljiljana Zmak

    2013-01-01

    Full Text Available Mycobacterium tuberculosis remains a major global health problem and is currently killing 1.5 million people every year. One of the most important steps in tuberculosis control is the rapid and accurate laboratory diagnosis. The Xpert MTB/RIF assay is a novel molecular, easy-to-use assay, which can lead to tuberculosis identification in less than 2 h. In this study, the Xpert MTB/RIF assay performance for rapid diagnosis of tuberculosis was evaluated in comparison with conventional culture methods; 361 pulmonary and extrapulmonary patient samples were collected between October 2010 and October 2012 and were analyzed at the National Reference laboratory for Mycobacteria, Zagreb, Croatia. For pulmonary samples the sensitivity and specificity were 86% and 100%, while for extrapulmonary samples the sensitivity and specificity were 75% and 99%, respectively. It was concluded that Xpert MTB/RIF assay has high sensitivity and specificity for both pulmonary and extrapulmonary specimens.

  8. Restriction fragment length polymorphism of the 5S-rRNA-NTS region: a rapid and precise method for plant identification.

    Science.gov (United States)

    Bertea, Cinzia Margherita; Gnavi, Giorgio

    2012-01-01

    Molecular genetic methods have several advantages over classical morphological and chemical analyses. The genetic method requires genotype instead than phenotype, therefore PCR-based techniques have been widely used for a rapid identification of plant species, varieties and chemotypes. Recently, the molecular discrimination of some higher plant species has been evaluated using sequences of a 5S-rRNA gene spacer region. The variation in the nontranscribed sequence (NTS) region has been used in a number of plant species for studying intraspecific variation, genome evolution, and phylogenetic reconstruction. Here, we describe a rapid method based on the use of the 5S-rRNA-NTS region as a tool for plant DNA fingerprinting, which combines PCR, sequencing and restriction fragment length polymorphism analyses.

  9. An Efficient Statistical Method to Compute Molecular Collisional Rate Coefficients

    Science.gov (United States)

    Loreau, Jérôme; Lique, François; Faure, Alexandre

    2018-01-01

    Our knowledge about the “cold” universe often relies on molecular spectra. A general property of such spectra is that the energy level populations are rarely at local thermodynamic equilibrium. Solving the radiative transfer thus requires the availability of collisional rate coefficients with the main colliding partners over the temperature range ∼10–1000 K. These rate coefficients are notoriously difficult to measure and expensive to compute. In particular, very few reliable collisional data exist for inelastic collisions involving reactive radicals or ions. In this Letter, we explore the use of a fast quantum statistical method to determine molecular collisional excitation rate coefficients. The method is benchmarked against accurate (but costly) rigid-rotor close-coupling calculations. For collisions proceeding through the formation of a strongly bound complex, the method is found to be highly satisfactory up to room temperature. Its accuracy decreases with decreasing potential well depth and with increasing temperature, as expected. This new method opens the way to the determination of accurate inelastic collisional data involving key reactive species such as {{{H}}}3+, H2O+, and H3O+ for which exact quantum calculations are currently not feasible.

  10. Preparation of hybrid molecularly imprinted polymer with double-templates for rapid simultaneous purification of theophylline and chlorogenic acid in green tea.

    Science.gov (United States)

    Tang, Weiyang; Li, Guizhen; Row, Kyung Ho; Zhu, Tao

    2016-05-15

    A novel double-templates technique was adopted for solid-phase extraction packing agent, and the obtained hybrid molecularly imprinted polymers with double-templates (theophylline and chlorogenic acid) were characterized by fourier transform infrared and field emission scanning electron microscope. The molecular recognition ability and binding capability for theophylline and chlorogenic acid of polymers was evaluated by static absorption and dynamic adsorption curves. A rapid and accurate approach was established for simultaneous purification of theophylline and chlorogenic acid in green tea by coupling hybrid molecularly imprinted solid-phase extraction with high performance liquid chromatography. With optimization of SPE procedure, a reliable analytical method was developed for highly recognition towards theophylline and chlorogenic acid in green tea with satisfactory extraction recoveries (theophylline: 96.7% and chlorogenic acid: 95.8%). The limit of detection and limit of quantity of the method were 0.01 μg/mL and 0.03 μg/mL for theophylline, 0.05 μg/mL and 0.17 μg/mL for chlorogenic acid, respectively. The recoveries of proposed method at three spiked levels analysis were 98.7-100.8% and 98.3-100.2%, respectively, with the relative standard deviation less than 1.9%. Hybrid molecularly imprinted polymers with double-templates showed good performance for two kinds of targets, and the proposed approach with high affinity of hybrid molecularly imprinted polymers might offer a novel method for the purification of complex samples. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Rapid detection of coliforms in drinking water of Arak city using multiplex PCR method in comparison with the standard method of culture (Most Probably Number).

    Science.gov (United States)

    Fatemeh, Dehghan; Reza, Zolfaghari Mohammad; Mohammad, Arjomandzadegan; Salomeh, Kalantari; Reza, Ahmari Gholam; Hossein, Sarmadian; Maryam, Sadrnia; Azam, Ahmadi; Mana, Shojapoor; Negin, Najarian; Reza, Kasravi Alii; Saeed, Falahat

    2014-05-01

    To analyse molecular detection of coliforms and shorten the time of PCR. Rapid detection of coliforms by amplification of lacZ and uidA genes in a multiplex PCR reaction was designed and performed in comparison with most probably number (MPN) method for 16 artificial and 101 field samples. The molecular method was also conducted on isolated coliforms from positive MPN samples; standard sample for verification of microbial method certificated reference material; isolated strains from certificated reference material and standard bacteria. The PCR and electrophoresis parameters were changed for reducing the operation time. Results of PCR for lacZ and uidA genes were similar in all of standard, operational and artificial samples and showed the 876 bp and 147 bp bands of lacZ and uidA genes by multiplex PCR. PCR results were confirmed by MPN culture method by sensitivity 86% (95% CI: 0.71-0.93). Also the total execution time, with a successful change of factors, was reduced to less than two and a half hour. Multiplex PCR method with shortened operation time was used for the simultaneous detection of total coliforms and Escherichia coli in distribution system of Arak city. It's recommended to be used at least as an initial screening test, and then the positive samples could be randomly tested by MPN.

  12. Aptamer contained triple-helix molecular switch for rapid fluorescent sensing of acetamiprid.

    Science.gov (United States)

    Liu, Xin; Li, Ying; Liang, Jing; Zhu, Wenyue; Xu, Jingyue; Su, Ruifang; Yuan, Lei; Sun, Chunyan

    2016-11-01

    In this study, an aptamer-based fluorescent sensing platform using triple-helix molecular switch (THMS) was developed for the pesticide screening represented by acetamiprid. The THMS was composed of two tailored DNA probes: a label-free central target specific aptamer sequence flanked by two arm segments acting as a recognition probe; a hairpin-shaped structure oligonucleotide serving as a signal transduction probe (STP), labeled with a fluorophore and a quencher at the 3' and 5'-end, respectively. In the absence of acetamiprid, complementary bindings of two arm segments of the aptamers with the loop sequence of STP enforce the formation of THMS with the "open" configuration of STP, and the fluorescence of THMS is on. In the presence of target acetamiprid, the aptamer-target binding results in the formation of a structured aptamer/target complex, which disassembles the THMS and releases the STP. The free STP is folded to a stem loop structure, and the fluorescence is quenched. The quenched fluorescence intensity was proportional to the concentration of acetamiprid in the range from 100 to 1200nM, with the limit of detection (LOD) as low as 9.12nM. In addition, this THMS-based method has been successfully used to test and quantify acetamiprid in Chinese cabbage with satisfactory recoveries, and the results were in full agreement with those from LC-MS. The aptamer-based THMS presents distinct advantages, including high stability, remarkable sensitivity, and preservation of the affinity and specificity of the original aptamer. Most importantly, this strategy is convenient and generalizable by virtue of altering the aptamer sequence without changing the triple-helix structure. So, it is expected that this aptamer-based fluorescent assay could be extensively applied in the field of food safety inspection. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. A new rapid method for Clostridium difficile DNA extraction and detection in stool: toward point-of-care diagnostic testing.

    Science.gov (United States)

    Freifeld, Alison G; Simonsen, Kari A; Booth, Christine S; Zhao, Xing; Whitney, Scott E; Karre, Teresa; Iwen, Peter C; Viljoen, Hendrik J

    2012-01-01

    We describe a new method for the rapid diagnosis of Clostridium difficile infection, with stool sample preparation and DNA extraction by heat and physical disruption in a single-use lysis microreactor (LMR), followed by a rapid PCR amplification step. All steps can be accomplished in stool samples with discordant EIA results (GDH(+)/toxin(-)) were tested by both the LMR/PCR assay and the loop-mediated isothermal amplification test (LAMP) (Illumigene C. difficile; Meridian Bioscience, Cincinnati, OH). In 64/69 EIA-discordant samples, LAMP and LMR/PCR results matched (both positive in 29 sample and both negative in 35 samples); in the remaining 5 samples, results were discrepant between the LAMP assay (all five negative) and the LMR/PCR assay (all 5 positive). Overall, LMR/PCR testing matched the current algorithm of EIA and/or LAMP reflex testing in 193/198 (97.5%) samples. The present proof-of-concept study suggests that the novel LMR/PCR technique described here may be developed as an inexpensive, rapid, and reliable point-of-care diagnostic test for C. difficile infection and other infectious diseases. Copyright © 2012 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

  14. A rapid and quantitative method to detect human circulating tumor cells in a preclinical animal model.

    Science.gov (United States)

    Tu, Shih-Hsin; Hsieh, Yi-Chen; Huang, Li-Chi; Lin, Chun-Yu; Hsu, Kai-Wen; Hsieh, Wen-Shyang; Chi, Wei-Ming; Lee, Chia-Hwa

    2017-06-23

    As cancer metastasis is the deadliest aspect of cancer, causing 90% of human deaths, evaluating the molecular mechanisms underlying this process is the major interest to those in the drug development field. Both therapeutic target identification and proof-of-concept experimentation in anti-cancer drug development require appropriate animal models, such as xenograft tumor transplantation in transgenic and knockout mice. In the progression of cancer metastasis, circulating tumor cells (CTCs) are the most critical factor in determining the prognosis of cancer patients. Several studies have demonstrated that measuring CTC-specific markers in a clinical setting (e.g., flow cytometry) can provide a current status of cancer development in patients. However, this useful technique has rarely been applied in the real-time monitoring of CTCs in preclinical animal models. In this study, we designed a rapid and reliable detection method by combining a bioluminescent in vivo imaging system (IVIS) and quantitative polymerase chain reaction (QPCR)-based analysis to measure CTCs in animal blood. Using the IVIS Spectrum CT System with 3D-imaging on orthotropic-developed breast-tumor-bearing mice. In this manuscript, we established a quick and reliable method for measuring CTCs in a preclinical animal mode. The key to this technique is the use of specific human and mouse GUS primers on DNA/RNA of mouse peripheral blood under an absolute qPCR system. First, the high sensitivity of cancer cell detection on IVIS was presented by measuring the luciferase carried MDA-MB-231 cells from 5 to 5x10(11) cell numbers with great correlation (R(2) = 0.999). Next, the MDA-MB-231 cell numbers injected by tail vein and their IVIS radiance signals were strongly corrected with qPCR-calculated copy numbers (R(2) > 0.99). Furthermore, by applying an orthotropic implantation animal model, we successfully distinguished xenograft tumor-bearing mice and control mice with a significant difference (p < 0

  15. A rapid method for soil cement design : Louisiana slope value method.

    Science.gov (United States)

    1964-03-01

    The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

  16. Furuncular myiasis: a simple and rapid method for extraction of intact Dermatobia hominis larvae.

    Science.gov (United States)

    Boggild, Andrea K; Keystone, Jay S; Kain, Kevin C

    2002-08-01

    We report a case of furuncular myiasis complicated by Staphylococcus aureus infection and beta-hemolytic streptococcal cellulitis. The Dermatobia hominis larva that caused this lesion could not be extracted using standard methods, including suffocation and application of lateral pressure, and surgery was contraindicated because of cellulitis. The botfly maggot was completely and rapidly extracted with an inexpensive, disposable, commercial venom extractor.

  17. Collision-induced fragmentation accurate mass spectrometric analysis methods to rapidly characterize phytochemicals in plant extracts

    Science.gov (United States)

    The rapid advances in analytical chromatography equipment have made the reliable and reproducible measurement of a wide range of plant chemical components possible. Full chemical characterization of a given plant material is possible with the new mass spectrometers currently available. New methods a...

  18. Collaborative validation of a rapid method for efficient virus concentration in bottled water

    DEFF Research Database (Denmark)

    Schultz, Anna Charlotte; Perelle, Sylvie; Di Pasquale, Simona

    2011-01-01

    Enteric viruses, including norovirus (NoV) and hepatitis A virus (HAV), have emerged as a major cause of waterborne outbreaks worldwide. Due to their low infectious doses and low concentrations in water samples, an efficient and rapid virus concentration method is required for routine control. Th...

  19. A Rapid Method for Measuring Strontium-90 Activity in Crops in China

    Directory of Open Access Journals (Sweden)

    Pan Lingjing Pan

    2017-01-01

    Full Text Available A rapid method for measuring Sr-90 activity in crop ashes is presented. Liquid scintillation counting, combined with ion exchange columns 4‘, 4“(5“-di-t-butylcyclohexane-18-crown-6, is used to determine the activity of Sr-90 in crops. The yields of chemical procedure are quantified using gravimetric analysis. The conventional method that uses ion-exchange resin with HDEHP could not completely remove all the bismuth when comparatively large lead and bismuth exist in the samples. This is overcome by the rapid method. The chemical yield of this method is about 60% and the MDA for Sr-90 is found to be 2:32 Bq/kg. The whole procedure together with using spectrum analysis to determine the activity only takes about one day, which is really a large improvement compared with the conventional method. A modified conventional method is also described here to verify the value of the rapid one. These two methods can meet di_erent needs of daily monitoring and emergency situation.

  20. A Rapid Method for Measuring Strontium-90 Activity in Crops in China

    Science.gov (United States)

    Pan, Lingjing Pan; Yu, Guobing; Wen, Deyun; Chen, Zhi; Sheng, Liusi; Liu, Chung-King; Xu, X. George

    2017-09-01

    A rapid method for measuring Sr-90 activity in crop ashes is presented. Liquid scintillation counting, combined with ion exchange columns 4`, 4"(5")-di-t-butylcyclohexane-18-crown-6, is used to determine the activity of Sr-90 in crops. The yields of chemical procedure are quantified using gravimetric analysis. The conventional method that uses ion-exchange resin with HDEHP could not completely remove all the bismuth when comparatively large lead and bismuth exist in the samples. This is overcome by the rapid method. The chemical yield of this method is about 60% and the MDA for Sr-90 is found to be 2:32 Bq/kg. The whole procedure together with using spectrum analysis to determine the activity only takes about one day, which is really a large improvement compared with the conventional method. A modified conventional method is also described here to verify the value of the rapid one. These two methods can meet di_erent needs of daily monitoring and emergency situation.

  1. Considerations for Task Analysis Methods and Rapid E-Learning Development Techniques

    Directory of Open Access Journals (Sweden)

    Dr. Ismail Ipek

    2014-02-01

    Full Text Available The purpose of this paper is to provide basic dimensions for rapid training development in e-learning courses in education and business. Principally, it starts with defining task analysis and how to select tasks for analysis and task analysis methods for instructional design. To do this, first, learning and instructional technologies as visions of the future were discussed. Second, the importance of task analysis methods in rapid e-learning was considered, with learning technologies as asynchronous and synchronous e-learning development. Finally, rapid instructional design concepts and e-learning design strategies were defined and clarified with examples, that is, all steps for effective task analysis and rapid training development techniques based on learning and instructional design approaches were discussed, such as m-learning and other delivery systems. As a result, the concept of task analysis, rapid e-learning development strategies and the essentials of online course design were discussed, alongside learner interface design features for learners and designers.

  2. An economical and combined method for rapid and efficient isolation of fungal DNA.

    Science.gov (United States)

    Lech, T; Syguła-Cholewinska, J; Szostak-Kot, J

    2014-12-18

    DNA isolation is a crucial step of conducting genetic studies in any organism. However, this process is quite difficult when studying fungi because of the need to damage the fungal cell walls of specific structures. In this study, we developed a method for the rapid and efficient isolation of fungal DNA based on simultaneous mechanical and enzymatic cell wall degradation. There are several typical modifications of the standard phenol-chloroform DNA extraction method. This method can be modified to degrade the fungal cell wall. The first step of the presented DNA extraction included manual homogenization in modified lysis buffer. Next, enzymatic digestion using 2 enzymes was conducted, including lyticase and proteinase K. To carefully select the most favorable conditions, we developed an economical, rapid, and reliable method for fungal DNA extraction that ensures both high efficiency and proper purity, which are essential for further analyses.

  3. Rapid method for determination of carbonyl groups in lignin compounds by headspace gas chromatography.

    Science.gov (United States)

    Li, Jing; Hu, Hui-Chao; Chai, Xin-Sheng

    2015-07-24

    The paper reports on a novel method for rapid determination of carbonyl in lignins by headspace gas chromatography (HS-GC). The method involves the quantitative carbonyl reduction for aldehydes in 2min at room temperature or for acetones in 30min at 80°C by sodium borohydride solution in a closed headspace sample vial. After the reaction, the solution was acidified by injecting sulfuric acid solution and the hydrogen released to the headspace was determined by GC using thermal-conductivity detector. The results showed that with the addition of SiO2 powder, the reduction reaction of carbonyl groups can be greatly facilitated. The method has a good measurement precision (RSD<7.74%) and accuracy (relative error <10% compared with a reference method) in the carbonyl quantification. It is suitable to be used for rapid determination of carbonyl content in lignin and related materials. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Conventional, molecular methods and biomarkers molecules in detection of septicemia

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Arabestani

    2015-01-01

    Full Text Available Sepsis is a leading cause of morbidity and mortality in hospitalized patients worldwide and based on studies, 30-40% of all cases of severe sepsis and septic shock results from the blood stream infections (BSIs. Identifying of the disease, performing laboratory tests, and consequently treatment are factors that required for optimum management of BSIs. In addition, applying precise and immediate identification of the etiologic agent is a prerequisite for specific antibiotic therapy of pathogen and thereby decreasing mortality rates. The diagnosis of sepsis is difficult because clinical signs of sepsis often overlap with other noninfectious cases of systemic inflammation. BSIs are usually diagnosed by performing a series of techniques such as blood cultures, polymerase chain reaction-based methods, and biomarkers of sepsis. Extremely time-consuming even to take up to several days is a major limitation of conventional methods. In addition, yielding false-negative results due to fastidious and slow-growing microorganisms and also in case of antibiotic pretreated samples are other limitations. In comparison, molecular methods are capable of examining a blood sample obtained from suspicious patient with BSI and gave the all required information to prescribing antimicrobial therapy for detected bacterial or fungal infections immediately. Because of an emergency of sepsis, new methods are being developed. In this review, we discussed about the most important sepsis diagnostic methods and numbered the advantage and disadvantage of the methods in detail.

  5. Apparatus and method for rapid separation and detection of hydrocarbon fractions in a fluid stream

    Science.gov (United States)

    Sluder, Charles S.; Storey, John M.; Lewis, Sr., Samuel A.

    2013-01-22

    An apparatus and method for rapid fractionation of hydrocarbon phases in a sample fluid stream are disclosed. Examples of the disclosed apparatus and method include an assembly of elements in fluid communication with one another including one or more valves and at least one sorbent chamber for removing certain classifications of hydrocarbons and detecting the remaining fractions using a detector. The respective ratios of hydrocarbons are determined by comparison with a non separated fluid stream.

  6. A convenient and rapid method for genetic transformation of E. coli with plasmids.

    Science.gov (United States)

    Chen, X; Guo, P; Xie, Z; Shen, P

    2001-12-01

    A convenient and rapid method for the genetic transformation of Escherichia coli with plasmids is proposed. By mixing the recipient cells and plasmid DNA and spreading them directly on selective medium plates containing Ca2+, the so-called 'plate transformation' could achieve almost the same transformation efficiency as the classical transformation method with calcium. The whole protocol takes only about 2 min, its simplicity compared favorably, not only to the usual protocol, but also to all other documented modifications.

  7. Rapid qualitative research methods during complex health emergencies: A systematic review of the literature.

    Science.gov (United States)

    Johnson, Ginger A; Vindrola-Padros, Cecilia

    2017-09-01

    The 2013-2016 Ebola outbreak in West Africa highlighted both the successes and limitations of social science contributions to emergency response operations. An important limitation was the rapid and effective communication of study findings. A systematic review was carried out to explore how rapid qualitative methods have been used during global heath emergencies to understand which methods are commonly used, how they are applied, and the difficulties faced by social science researchers in the field. We also asses their value and benefit for health emergencies. The review findings are used to propose recommendations for qualitative research in this context. Peer-reviewed articles and grey literature were identified through six online databases. An initial search was carried out in July 2016 and updated in February 2017. The PRISMA checklist was used to guide the reporting of methods and findings. The articles were assessed for quality using the MMAT and AACODS checklist. From an initial search yielding 1444 articles, 22 articles met the criteria for inclusion. Thirteen of the articles were qualitative studies and nine used a mixed-methods design. The purpose of the rapid studies included: the identification of causes of the outbreak, and assessment of infrastructure, control strategies, health needs and health facility use. The studies varied in duration (from 4 days to 1 month). The main limitations identified by the authors were: the low quality of the collected data, small sample sizes, and little time for cross-checking facts with other data sources to reduce bias. Rapid qualitative methods were seen as beneficial in highlighting context-specific issues that need to be addressed locally, population-level behaviors influencing health service use, and organizational challenges in response planning and implementation. Recommendations for carrying out rapid qualitative research in this context included the early designation of community leaders as a point of

  8. Seed oil polyphenols: rapid and sensitive extraction method and high resolution-mass spectrometry identification.

    Science.gov (United States)

    Koubaa, Mohamed; Mhemdi, Houcine; Vorobiev, Eugène

    2015-05-01

    Phenolic content is a primary parameter for vegetables oil quality evaluation, and directly involved in the prevention of oxidation and oil preservation. Several methods have been reported in the literature for polyphenols extraction from seed oil but the approaches commonly used remain manually handled. In this work, we propose a rapid and sensitive method for seed oil polyphenols extraction and identification. For this purpose, polyphenols were extracted from Opuntia stricta Haw seed oil, using high frequency agitation, separated, and then identified using a liquid chromatography-high resolution mass spectrometry method. Our results showed good sensitivity and reproducibility of the developed methods. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Biogeographical characterization of Saccharomyces cerevisiae wine yeast by molecular methods

    Science.gov (United States)

    Tofalo, Rosanna; Perpetuini, Giorgia; Schirone, Maria; Fasoli, Giuseppe; Aguzzi, Irene; Corsetti, Aldo; Suzzi, Giovanna

    2013-01-01

    Biogeography is the descriptive and explanatory study of spatial patterns and processes involved in the distribution of biodiversity. Without biogeography, it would be difficult to study the diversity of microorganisms because there would be no way to visualize patterns in variation. Saccharomyces cerevisiae, “the wine yeast,” is the most important species involved in alcoholic fermentation, and in vineyard ecosystems, it follows the principle of “everything is everywhere.” Agricultural practices such as farming (organic versus conventional) and floor management systems have selected different populations within this species that are phylogenetically distinct. In fact, recent ecological and geographic studies highlighted that unique strains are associated with particular grape varieties in specific geographical locations. These studies also highlighted that significant diversity and regional character, or ‘terroir,’ have been introduced into the winemaking process via this association. This diversity of wild strains preserves typicity, the high quality, and the unique flavor of wines. Recently, different molecular methods were developed to study population dynamics of S. cerevisiae strains in both vineyards and wineries. In this review, we will provide an update on the current molecular methods used to reveal the geographical distribution of S. cerevisiae wine yeast. PMID:23805132

  10. Biogeographical characterization of Saccharomyces cerevisiae wine yeast by molecular methods.

    Science.gov (United States)

    Tofalo, Rosanna; Perpetuini, Giorgia; Schirone, Maria; Fasoli, Giuseppe; Aguzzi, Irene; Corsetti, Aldo; Suzzi, Giovanna

    2013-01-01

    Biogeography is the descriptive and explanatory study of spatial patterns and processes involved in the distribution of biodiversity. Without biogeography, it would be difficult to study the diversity of microorganisms because there would be no way to visualize patterns in variation. Saccharomyces cerevisiae, "the wine yeast," is the most important species involved in alcoholic fermentation, and in vineyard ecosystems, it follows the principle of "everything is everywhere." Agricultural practices such as farming (organic versus conventional) and floor management systems have selected different populations within this species that are phylogenetically distinct. In fact, recent ecological and geographic studies highlighted that unique strains are associated with particular grape varieties in specific geographical locations. These studies also highlighted that significant diversity and regional character, or 'terroir,' have been introduced into the winemaking process via this association. This diversity of wild strains preserves typicity, the high quality, and the unique flavor of wines. Recently, different molecular methods were developed to study population dynamics of S. cerevisiae strains in both vineyards and wineries. In this review, we will provide an update on the current molecular methods used to reveal the geographical distribution of S. cerevisiae wine yeast.

  11. Biogeographical characterisation of Saccharomyces cerevisiae wine yeast by molecular methods

    Directory of Open Access Journals (Sweden)

    Rosanna eTofalo

    2013-06-01

    Full Text Available Biogeography is the descriptive and explanatory study of spatial patterns and processes involved in the distribution of biodiversity. Without biogeography, it would be difficult to study the diversity of microorganisms because there would be no way to visualise patterns in variation. Saccharomyces cerevisiae, the wine yeast, is the most important species involved in alcoholic fermentation, and in vineyard ecosystems, it follows the principle of everything is everywhere. Agricultural practices such as farming (organic versus conventional and floor management systems have selected different populations within this species that are phylogenetically distinct. In fact, recent ecological and geographic studies highlighted that unique strains are associated with particular grape varieties in specific geographical locations. These studies also highlighted that significant diversity and regional character, or ‘terroir’, have been introduced into the winemaking process via this association. This diversity of wild strains preserves typicity, the high quality and the unique flavour of wines. Recently, different molecular methods were developed to study population dynamics of S. cerevisiae strains in both vineyards and wineries. In this review, we will provide an update on the current molecular methods used to reveal the geographical distribution of S. cerevisiae wine yeast.

  12. The use of rapid review methods in health technology assessments: 3 case studies.

    Science.gov (United States)

    Kaltenthaler, Eva; Cooper, Katy; Pandor, Abdullah; Martyn-St James, Marrissa; Chatters, Robin; Wong, Ruth

    2016-08-26

    Rapid reviews are of increasing importance within health technology assessment due to time and resource constraints. There are many rapid review methods available although there is little guidance as to the most suitable methods. We present three case studies employing differing methods to suit the evidence base for each review and outline some issues to consider when selecting an appropriate method. Three recently completed systematic review short reports produced for the UK National Institute for Health Research were examined. Different approaches to rapid review methods were used in the three reports which were undertaken to inform the commissioning of services within the NHS and to inform future trial design. We describe the methods used, the reasoning behind the choice of methods and explore the strengths and weaknesses of each method. Rapid review methods were chosen to meet the needs of the review and each review had distinctly different challenges such as heterogeneity in terms of populations, interventions, comparators and outcome measures (PICO) and/or large numbers of relevant trials. All reviews included at least 10 randomised controlled trials (RCTs), each with numerous included outcomes. For the first case study (sexual health interventions), very diverse studies in terms of PICO were included. P-values and summary information only were presented due to substantial heterogeneity between studies and outcomes measured. For the second case study (premature ejaculation treatments), there were over 100 RCTs but also several existing systematic reviews. Data for meta-analyses were extracted directly from existing systematic reviews with new RCT data added where available. For the final case study (cannabis cessation therapies), studies included a wide range of interventions and considerable variation in study populations and outcomes. A brief summary of the key findings for each study was presented and narrative synthesis used to summarise results for each

  13. Application of next-generation sequencing for rapid marker development in molecular plant breeding: a case study on anthracnose disease resistance in Lupinus angustifolius L.

    Science.gov (United States)

    2012-01-01

    Background In the last 30 years, a number of DNA fingerprinting methods such as RFLP, RAPD, AFLP, SSR, DArT, have been extensively used in marker development for molecular plant breeding. However, it remains a daunting task to identify highly polymorphic and closely linked molecular markers for a target trait for molecular marker-assisted selection. The next-generation sequencing (NGS) technology is far more powerful than any existing generic DNA fingerprinting methods in generating DNA markers. In this study, we employed a grain legume crop Lupinus angustifolius (lupin) as a test case, and examined the utility of an NGS-based method of RAD (restriction-site associated DNA) sequencing as DNA fingerprinting for rapid, cost-effective marker development tagging a disease resistance gene for molecular breeding. Results Twenty informative plants from a cross of RxS (disease resistant x susceptible) in lupin were subjected to RAD single-end sequencing by multiplex identifiers. The entire RAD sequencing products were resolved in two lanes of the 16-lanes per run sequencing platform Solexa HiSeq2000. A total of 185 million raw reads, approximately 17 Gb of sequencing data, were collected. Sequence comparison among the 20 test plants discovered 8207 SNP markers. Filtration of DNA sequencing data with marker identification parameters resulted in the discovery of 38 molecular markers linked to the disease resistance gene Lanr1. Five randomly selected markers were converted into cost-effective, simple PCR-based markers. Linkage analysis using marker genotyping data and disease resistance phenotyping data on a F8 population consisting of 186 individual plants confirmed that all these five markers were linked to the R gene. Two of these newly developed sequence-specific PCR markers, AnSeq3 and AnSeq4, flanked the target R gene at a genetic distance of 0.9 centiMorgan (cM), and are now replacing the markers previously developed by a traditional DNA fingerprinting method for

  14. Application of next-generation sequencing for rapid marker development in molecular plant breeding: a case study on anthracnose disease resistance in Lupinus angustifolius L.

    Directory of Open Access Journals (Sweden)

    Yang Huaan

    2012-07-01

    Full Text Available Abstract Background In the last 30 years, a number of DNA fingerprinting methods such as RFLP, RAPD, AFLP, SSR, DArT, have been extensively used in marker development for molecular plant breeding. However, it remains a daunting task to identify highly polymorphic and closely linked molecular markers for a target trait for molecular marker-assisted selection. The next-generation sequencing (NGS technology is far more powerful than any existing generic DNA fingerprinting methods in generating DNA markers. In this study, we employed a grain legume crop Lupinus angustifolius (lupin as a test case, and examined the utility of an NGS-based method of RAD (restriction-site associated DNA sequencing as DNA fingerprinting for rapid, cost-effective marker development tagging a disease resistance gene for molecular breeding. Results Twenty informative plants from a cross of RxS (disease resistant x susceptible in lupin were subjected to RAD single-end sequencing by multiplex identifiers. The entire RAD sequencing products were resolved in two lanes of the 16-lanes per run sequencing platform Solexa HiSeq2000. A total of 185 million raw reads, approximately 17 Gb of sequencing data, were collected. Sequence comparison among the 20 test plants discovered 8207 SNP markers. Filtration of DNA sequencing data with marker identification parameters resulted in the discovery of 38 molecular markers linked to the disease resistance gene Lanr1. Five randomly selected markers were converted into cost-effective, simple PCR-based markers. Linkage analysis using marker genotyping data and disease resistance phenotyping data on a F8 population consisting of 186 individual plants confirmed that all these five markers were linked to the R gene. Two of these newly developed sequence-specific PCR markers, AnSeq3 and AnSeq4, flanked the target R gene at a genetic distance of 0.9 centiMorgan (cM, and are now replacing the markers previously developed by a traditional DNA

  15. SAS molecular tests Salmonella detection kit. Performance tested method 021202.

    Science.gov (United States)

    Bapanpally, Chandra; Montier, Laura; Khan, Shah; Kasra, Akif; Brunelle, Sharon L

    2014-01-01

    The SAS Molecular tests Salmonella Detection method, a Loop-mediated Isothermal Amplification method, performed as well as or better than the U.S. Department of Agriculture-Food Safety Inspection Service Microbiology Laboratory Guidebook and the U.S. Food and Drug Administration Bacteriological Analytical Manual reference methods for ground beef, beef trim, ground turkey, chicken carcass rinses, bagged mixed lettuce, and fresh spinach. The ground beef (30% fat, 25 g test portion), poultry matrixes and leafy greens were validated in a 6-7 h enrichment, and ground beef (30% fat, 375 g composite test portion) and beef trim (375 g composite test portion) were validated in a 16-20 h enrichment. The method performance for meat and leafy green matrixes was shown to be acceptable under conditions of co-enrichment with Escherichia coli 0157. Thus, after a short 6-7 h co-enrichment step, ground beef, beef trim, lettuce, and spinach can be tested for both Salmonella and E. coli O157. Inclusivity and exclusivity testing revealed no false negatives and no false positives among the 100 Salmonella serovars and 30 non-Salmonella species examined. The method was shown to be robust when enrichment time, DNA extract hold time, and DNA volume were varied.

  16. [Development of a rapid test kit for antibody to HIV by nano immunomagnetic lateral flow method].

    Science.gov (United States)

    Yang, Fa-qing; Lee, Tony; Wang, Chao-nan; Sun, Shu-ye; Li, Shan-shan; Tian, Hui

    2010-06-01

    To develop a rapid test kit for antibody to HIV by nano immunomagnetic lateral flow method. A rapid test kit was developed by conjugation of the HIV antigen gp41 and gp36 to 200nm super paramagnetic particles by carbodiimide (EDC) and coating of the HIV antigen gp41 and gp36 to nitrocellulose membrane. Then the kit was evaluated with serials of experiments. The kit was qualified with examination of national reference panel of anti-HIV antibody for colloidal gold diagnostic kit. The sensitivity was 100% by tested with 20 HIV antibody positive sera, the specificity was 98.5% by tested with 600 HIV antibody negative sera, respectively. The stability of the kit was over 12 month by storage at room temperature. A diagnostic kit for antibody to HIV was developed with the advantages of convenience, rapid test, good stability and point of care.

  17. Lessons learned with molecular methods targeting the BCSP-31 membrane protein for diagnosis of human brucellosis.

    Science.gov (United States)

    Sanjuan-Jimenez, Rocio; Colmenero, Juan D; Morata, Pilar

    2017-06-01

    Brucellosis remains an emerging and re-emerging zoonosis worldwide causing high human morbidity. It usually affects persons who are permanently exposed to fastidious microorganisms of the Brucella genus and has a nonspecific clinical picture. Thus, diagnosis of brucellosis can sometimes be difficult. Molecular techniques have recently been found very useful in the diagnosis of brucellosis together with its common and very diverse focal complications. We herein review all the lessons learned by our group concerning the molecular diagnosis of human brucellosis over the last twenty years. The results, initially using one-step conventional PCR, later PCR-ELISA and more recently real-time PCR, using both fluorescent intercalating reagents (SYBR-Green I) and specific probes (Taqman), have shown that these techniques are all much more sensitive than bacteriological methods and more specific than the usual serological techniques for the diagnosis of primary infection, the post-treatment control of the disease, early detection of relapse and the diagnosis of focal complications. Optimization of the technique and improvements introduced over the years show that molecular methods, currently accessible for most clinical laboratories, enable easy rapid diagnosis of brucellosis at the same time as they avoid any risk to laboratory personnel while handling live Brucella spp. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. A Simple and Rapid Method for DNA Isolation from Xylophagous Insects

    Directory of Open Access Journals (Sweden)

    Horacio Cano-Camacho

    2010-12-01

    Full Text Available Published methods to isolate DNA from insects are not always effective in xylophagous insects because they have high concentrations of phenolics and other secondary plant compounds in their digestive tracts. A simple, reliable and labor-effective cetyltrimethylammonium bromide-polyvinylpyrrolidone (CTAB-PVP method for isolation of high quality DNA from xylophagous insects is described. This method was successfully applied to PCR and restriction analysis, indicating removal of common inhibitors. DNA isolated by the CTAB-PVP method could be used in most molecular analyses.

  19. Rapid culture-based methods for drug-resistance detection in Mycobacterium tuberculosis.

    Science.gov (United States)

    Palomino, Juan Carlos; Martin, Anandi; Von Groll, Andrea; Portaels, Francoise

    2008-10-01

    Tuberculosis still represents a major public health problem, especially in low-resource countries where the burden of the disease is more important. Multidrug-resistant and extensively drug drug-resistant tuberculosis constitute serious problems for the efficient control of the disease stressing the need to investigate resistance to first- and second-line drugs. Conventional methods for detecting drug-resistance in Mycobacterium tuberculosis are slow and cumbersome. The most commonly used proportion method on Löwenstein-Jensen medium or Middlebrook agar requires a minimum of 3-4 weeks to produce results. Several new approaches have been proposed in the last years for the rapid and timely detection of drug-resistance in tuberculosis. This review will address phenotypic culture-based methods for rapid drug susceptibility testing in M. tuberculosis.

  20. Determination of rapid chlorination rate constants by a stopped-flow spectrophotometric competition kinetics method.

    Science.gov (United States)

    Song, Dean; Liu, Huijuan; Qiang, Zhimin; Qu, Jiuhui

    2014-05-15

    Free chlorine is extensively used for water and wastewater disinfection nowadays. However, it still remains a big challenge to determine the rate constants of rapid chlorination reactions although competition kinetics and stopped-flow spectrophotometric (SFS) methods have been employed individually to investigate fast reaction kinetics. In this work, we proposed an SFS competition kinetics method to determine the rapid chlorination rate constants by using a common colorimetric reagent, N,N-diethyl-p-phenylenediamine (DPD), as a reference probe. A kinetic equation was first derived to estimate the reaction rate constant of DPD towards chlorine under a given pH and temperature condition. Then, on that basis, an SFS competition kinetics method was proposed to determine directly the chlorination rate constants of several representative compounds including tetracycline, ammonia, and four α-amino acids. Although Cl2O is more reactive than HOCl, its contribution to the overall chlorination kinetics of the test compounds could be neglected in this study. Finally, the developed method was validated through comparing the experimentally measured chlorination rate constants of the selected compounds with those obtained or calculated from literature and analyzing with Taft's correlation as well. This study demonstrates that the SFS competition kinetics method can measure the chlorination rate constants of a test compound rapidly and accurately. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Rapid Column Extraction Method for Actinides and Sr-89/90 in Water Samples

    Energy Technology Data Exchange (ETDEWEB)

    MAXWELL III, SHERROD L.

    2005-06-15

    The SRS Environmental Laboratory analyzes water samples for environmental monitoring, including river water and ground water samples. A new, faster actinide and strontium 89/90 separation method has been developed and implemented to improve productivity, reduce labor costs and add capacity to this laboratory. This method uses stacked TEVA Resin{reg_sign}, TRU Resin{reg_sign} and Sr-Resin{reg_sign} cartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium (Pu), neptunium (Np), uranium (U), americium (Am), curium (Cm) and thorium (Th) using a single multi-stage column combined with alpha spectrometry. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized. The method can be used for routine analysis or as a rapid method for emergency preparedness. Thorium and curium are often analyzed separately due to the interference of the daughter of Th-229 tracer, actinium (Ac)-225, on curium isotopes when measured by alpha spectrometry. This new method also adds a separation step using DGA Resin{reg_sign}, (Diglycolamide Resin, Eichrom Technologies) to remove Ac-225 and allow the separation and analysis of thorium isotopes and curium isotopes at the same time.

  2. Mycobacteria mobility shift assay: a method for the rapid identification of Mycobacterium tuberculosis and nontuberculous mycobacteria

    Directory of Open Access Journals (Sweden)

    Letícia Muraro Wildner

    2014-06-01

    Full Text Available The identification of mycobacteria is essential because tuberculosis (TB and mycobacteriosis are clinically indistinguishable and require different therapeutic regimens. The traditional phenotypic method is time consuming and may last up to 60 days. Indeed, rapid, affordable, specific and easy-to-perform identification methods are needed. We have previously described a polymerase chain reaction-based method called a mycobacteria mobility shift assay (MMSA that was designed for Mycobacterium tuberculosis complex (MTC and nontuberculous mycobacteria (NTM species identification. The aim of this study was to assess the MMSA for the identification of MTC and NTM clinical isolates and to compare its performance with that of the PRA-hsp65 method. A total of 204 clinical isolates (102 NTM and 102 MTC were identified by the MMSA and PRA-hsp65. For isolates for which these methods gave discordant results, definitive species identification was obtained by sequencing fragments of the 16S rRNA and hsp65 genes. Both methods correctly identified all MTC isolates. Among the NTM isolates, the MMSA alone assigned 94 (92.2% to a complex or species, whereas the PRA-hsp65 method assigned 100% to a species. A 91.5% agreement was observed for the 94 NTM isolates identified by both methods. The MMSA provided correct identification for 96.8% of the NTM isolates compared with 94.7% for PRA-hsp65. The MMSA is a suitable auxiliary method for routine use for the rapid identification of mycobacteria.

  3. Adapting and Evaluating a Rapid, Low-Cost Method to Enumerate Flies in the Household Setting.

    Science.gov (United States)

    Wolfe, Marlene K; Dentz, Holly N; Achando, Beryl; Mureithi, MaryAnne; Wolfe, Tim; Null, Clair; Pickering, Amy J

    2017-02-08

    Diarrhea is a leading cause of death among children under 5 years of age worldwide. Flies are important vectors of diarrheal pathogens in settings lacking networked sanitation services. There is no standardized method for measuring fly density in households; many methods are cumbersome and unvalidated. We adapted a rapid, low-cost fly enumeration technique previously developed for industrial settings, the Scudder fly grill, for field use in household settings. We evaluated its performance in comparison to a sticky tape fly trapping method at latrine and food preparation areas among households in rural Kenya. The grill method was more sensitive; it detected the presence of any flies at 80% (433/543) of sampling locations versus 64% (348/543) of locations by the sticky tape. We found poor concordance between the two methods, suggesting that standardizing protocols is important for comparison of fly densities between studies. Fly species identification was feasible with both methods; however, the sticky tape trap allowed for more nuanced identification. Both methods detected a greater presence of bottle flies near latrines compared with food preparation areas (P < 0.01). The grill method detected more flies at the food preparation area compared with near the latrine (P = 0.014) while the sticky tape method detected no difference. We recommend the Scudder grill as a sensitive fly enumeration tool that is rapid and low cost to implement. © The American Society of Tropical Medicine and Hygiene.

  4. Mycobacteria mobility shift assay: a method for the rapid identification of Mycobacterium tuberculosis and nontuberculous mycobacteria.

    Science.gov (United States)

    Wildner, Letícia Muraro; Bazzo, Maria Luiza; Liedke, Susie Coutinho; Nogueira, Christiane Lourenço; Segat, Gabriela; Senna, Simone Gonçalves; Schlindwein, Aline Daiane; Oliveira, Jaquelline Germano de; Rovaris, Darcita B; Bonjardim, Claudio A; Kroon, Erna G; Ferreira, Paulo C P

    2014-06-01

    The identification of mycobacteria is essential because tuberculosis (TB) and mycobacteriosis are clinically indistinguishable and require different therapeutic regimens. The traditional phenotypic method is time consuming and may last up to 60 days. Indeed, rapid, affordable, specific and easy-to-perform identification methods are needed. We have previously described a polymerase chain reaction-based method called a mycobacteria mobility shift assay (MMSA) that was designed for Mycobacterium tuberculosis complex (MTC) and nontuberculous mycobacteria (NTM) species identification. The aim of this study was to assess the MMSA for the identification of MTC and NTM clinical isolates and to compare its performance with that of the PRA-hsp65 method. A total of 204 clinical isolates (102 NTM and 102 MTC) were identified by the MMSA and PRA-hsp65. For isolates for which these methods gave discordant results, definitive species identification was obtained by sequencing fragments of the 16S rRNA and hsp65 genes. Both methods correctly identified all MTC isolates. Among the NTM isolates, the MMSA alone assigned 94 (92.2%) to a complex or species, whereas the PRA-hsp65 method assigned 100% to a species. A 91.5% agreement was observed for the 94 NTM isolates identified by both methods. The MMSA provided correct identification for 96.8% of the NTM isolates compared with 94.7% for PRA-hsp65. The MMSA is a suitable auxiliary method for routine use for the rapid identification of mycobacteria.

  5. A rapid chromatographic method for quality control of technetium-99m-bicisate.

    Science.gov (United States)

    Amin, K C; Saha, G B; Go, R T

    1997-03-01

    The purpose of this work was to develop a simple and rapid method to determine the radiochemical purity of 99mTc-bicisate. A rapid paper chromatographic (PC) method was developed to determine the radiochemical purity of 99mTc-bicisate and compare the results with those of the manufacturer's recommended method. The present PC method included Whatman 3MM paper as the solid phase and ethyl acetate as the solvent. The time for chromatography by this technique was 4-5 min compared to about 23 min by the manufacturer's method. The Rf value of 99mTc-bicisate (Rf = 0.9-1.0) was widely different from those of 99mTcO4- and reduced 99mTc (Rf = 0.0 for both) so the chromatographic strip after development could be readily cut into two segments, in order to determine the labeling yield. No significant difference in labeling yields was found between the present method and the manufacturer's method. The PC method using Whatman 3MM paper and ethyl acetate is a simple and fast technique to determine the radiochemical purity of 99mTc-bicisate and may be substituted for the manufacturer's recommended method to save time.

  6. Comparison of free energy methods for molecular systems.

    Science.gov (United States)

    Ytreberg, F Marty; Swendsen, Robert H; Zuckerman, Daniel M

    2006-11-14

    We present a detailed comparison of computational efficiency and precision for several free energy difference (DeltaF) methods. The analysis includes both equilibrium and nonequilibrium approaches, and distinguishes between unidirectional and bidirectional methodologies. We are primarily interested in comparing two recently proposed approaches, adaptive integration, and single-ensemble path sampling to more established methodologies. As test cases, we study relative solvation free energies of large changes to the size or charge of a Lennard-Jones particle in explicit water. The results show that, for the systems used in this study, both adaptive integration and path sampling offer unique advantages over the more traditional approaches. Specifically, adaptive integration is found to provide very precise long-simulation DeltaF estimates as compared to other methods used in this report, while also offering rapid estimation of DeltaF. The results demonstrate that the adaptive integration approach is the best overall method for the systems studied here. The single-ensemble path sampling approach is found to be superior to ordinary Jarzynski averaging for the unidirectional, "fast-growth" nonequilibrium case. Closer examination of the path sampling approach on a two-dimensional system suggests it may be the overall method of choice when conformational sampling barriers are high. However, it appears that the free energy landscapes for the systems used in this study have rather modest configurational sampling barriers.

  7. Visual and colorimetric methods for rapid determination of total tannins in vegetable raw materials

    Directory of Open Access Journals (Sweden)

    S. P. Kalinkina

    2016-01-01

    Full Text Available The article is dedicated to the development of rapid colorimetric method for determining the amount of tannins in aqueous extracts of vegetable raw materials. The sorption-based colorimetric test is determining sorption tannins polyurethane foam, impregnated of FeCl3, receiving on its surface painted in black and green color of the reaction products and the determination of their in sorbent matrix. Selectivity is achieved by determining the tannins specific interaction of polyphenols with iron ions (III. The conditions of sorption-colorimetric method: the concentration of ferric chloride (III, impregnated in the polyurethane foam; sorbent mass in the analytical cartridge; degree of loading his agent; the contact time of the phases. color scales have been developed for the visual determination of the amount of tannins in terms of gallic acid. Spend a digitized image obtained scales using computer program “Sorbfil TLC”, excluding a subjective assessment of the intensity of the color scale of the test. The results obtained determine the amount of tannins in aqueous extracts of vegetable raw rapid method using tablets and analytical cartridges. The results of the test determination of tannins with visual and densitometric analytical signal registration are compared to known methods. Spend a metrological evaluation of the results of determining the amount of tannins sorption rapid colorimetric methods. Time visual and densitometric rapid determination of tannins, taking into account the sample preparation is 25–30 minutes, the relative error does not exceed 28 %. The developed test methods for quantifying the content of tannins allow to exclude the use of sophisticated analytical equipment, carry out the analysis in non-laboratory conditions do not require highly skilled personnel.

  8. The use of digital PCR to improve the application of quantitative molecular diagnostic methods for tuberculosis.

    Science.gov (United States)

    Devonshire, Alison S; O'Sullivan, Denise M; Honeyborne, Isobella; Jones, Gerwyn; Karczmarczyk, Maria; Pavšič, Jernej; Gutteridge, Alice; Milavec, Mojca; Mendoza, Pablo; Schimmel, Heinz; Van Heuverswyn, Fran; Gorton, Rebecca; Cirillo, Daniela Maria; Borroni, Emanuele; Harris, Kathryn; Barnard, Marinus; Heydenrych, Anthenette; Ndusilo, Norah; Wallis, Carole L; Pillay, Keshree; Barry, Thomas; Reddington, Kate; Richter, Elvira; Mozioğlu, Erkan; Akyürek, Sema; Yalçınkaya, Burhanettin; Akgoz, Muslum; Žel, Jana; Foy, Carole A; McHugh, Timothy D; Huggett, Jim F

    2016-08-03

    Real-time PCR (qPCR) based methods, such as the Xpert MTB/RIF, are increasingly being used to diagnose tuberculosis (TB). While qualitative methods are adequate for diagnosis, the therapeutic monitoring of TB patients requires quantitative methods currently performed using smear microscopy. The potential use of quantitative molecular measurements for therapeutic monitoring has been investigated but findings have been variable and inconclusive. The lack of an adequate reference method and reference materials is a barrier to understanding the source of such disagreement. Digital PCR (dPCR) offers the potential for an accurate method for quantification of specific DNA sequences in reference materials which can be used to evaluate quantitative molecular methods for TB treatment monitoring. To assess a novel approach for the development of quality assurance materials we used dPCR to quantify specific DNA sequences in a range of prototype reference materials and evaluated accuracy between different laboratories and instruments. The materials were then also used to evaluate the quantitative performance of qPCR and Xpert MTB/RIF in eight clinical testing laboratories. dPCR was found to provide results in good agreement with the other methods tested and to be highly reproducible between laboratories without calibration even when using different instruments. When the reference materials were analysed with qPCR and Xpert MTB/RIF by clinical laboratories, all laboratories were able to correctly rank the reference materials according to concentration, however there was a marked difference in the measured magnitude. TB is a disease where the quantification of the pathogen could lead to better patient management and qPCR methods offer the potential to rapidly perform such analysis. However, our findings suggest that when precisely characterised materials are used to evaluate qPCR methods, the measurement result variation is too high to determine whether molecular quantification

  9. A rapid method for soil cement design : Louisiana slope value method : part II : evaluation.

    Science.gov (United States)

    1966-05-01

    This report is an evaluation of the recently developed "Louisiana Slope Value Method". : The conclusion drawn are based on data from 637 separate samples representing nearly all major soil groups in Louisiana that are suitable for cement stabilizatio...

  10. Melting Temperature Mapping Method: A Novel Method for Rapid Identification of Unknown Pathogenic Microorganisms within Three Hours of Sample Collection.

    Science.gov (United States)

    Niimi, Hideki; Ueno, Tomohiro; Hayashi, Shirou; Abe, Akihito; Tsurue, Takahiro; Mori, Masashi; Tabata, Homare; Minami, Hiroshi; Goto, Michihiko; Akiyama, Makoto; Yamamoto, Yoshihiro; Saito, Shigeru; Kitajima, Isao

    2015-07-28

    Acquiring the earliest possible identification of pathogenic microorganisms is critical for selecting the appropriate antimicrobial therapy in infected patients. We herein report the novel "melting temperature (Tm) mapping method" for rapidly identifying the dominant bacteria in a clinical sample from sterile sites. Employing only seven primer sets, more than 100 bacterial species can be identified. In particular, using the Difference Value, it is possible to identify samples suitable for Tm mapping identification. Moreover, this method can be used to rapidly diagnose the absence of bacteria in clinical samples. We tested the Tm mapping method using 200 whole blood samples obtained from patients with suspected sepsis, 85% (171/200) of which matched the culture results based on the detection level. A total of 130 samples were negative according to the Tm mapping method, 98% (128/130) of which were also negative based on the culture method. Meanwhile, 70 samples were positive according to the Tm mapping method, and of the 59 suitable for identification, 100% (59/59) exhibited a "match" or "broad match" with the culture or sequencing results. These findings were obtained within three hours of whole blood collection. The Tm mapping method is therefore useful for identifying infectious diseases requiring prompt treatment.

  11. Application of kernel method in fluorescence molecular tomography

    Science.gov (United States)

    Zhao, Yue; Baikejiang, Reheman; Li, Changqing

    2017-02-01

    Reconstruction of fluorescence molecular tomography (FMT) is an ill-posed inverse problem. Anatomical guidance in the FMT reconstruction can improve FMT reconstruction efficiently. We have developed a kernel method to introduce the anatomical guidance into FMT robustly and easily. The kernel method is from machine learning for pattern analysis and is an efficient way to represent anatomical features. For the finite element method based FMT reconstruction, we calculate a kernel function for each finite element node from an anatomical image, such as a micro-CT image. Then the fluorophore concentration at each node is represented by a kernel coefficient vector and the corresponding kernel function. In the FMT forward model, we have a new system matrix by multiplying the sensitivity matrix with the kernel matrix. Thus, the kernel coefficient vector is the unknown to be reconstructed following a standard iterative reconstruction process. We convert the FMT reconstruction problem into the kernel coefficient reconstruction problem. The desired fluorophore concentration at each node can be calculated accordingly. Numerical simulation studies have demonstrated that the proposed kernel-based algorithm can improve the spatial resolution of the reconstructed FMT images. In the proposed kernel method, the anatomical guidance can be obtained directly from the anatomical image and is included in the forward modeling. One of the advantages is that we do not need to segment the anatomical image for the targets and background.

  12. Assessing numerical methods for molecular and particle simulation.

    Science.gov (United States)

    Shang, Xiaocheng; Kröger, Martin; Leimkuhler, Benedict

    2017-11-22

    We discuss the design of state-of-the-art numerical methods for molecular dynamics, focusing on the demands of soft matter simulation, where the purposes include sampling and dynamics calculations both in and out of equilibrium. We discuss the characteristics of different algorithms, including their essential conservation properties, the convergence of averages, and the accuracy of numerical discretizations. Formulations of the equations of motion which are suited to both equilibrium and nonequilibrium simulation include Langevin dynamics, dissipative particle dynamics (DPD), and the more recently proposed "pairwise adaptive Langevin" (PAdL) method, which, like DPD but unlike Langevin dynamics, conserves momentum and better matches the relaxation rate of orientational degrees of freedom. PAdL is easy to code and suitable for a variety of problems in nonequilibrium soft matter modeling; our simulations of polymer melts indicate that this method can also provide dramatic improvements in computational efficiency. Moreover we show that PAdL gives excellent control of the relaxation rate to equilibrium. In the nonequilibrium setting, we further demonstrate that while PAdL allows the recovery of accurate shear viscosities at higher shear rates than are possible using the DPD method at identical timestep, it also outperforms Langevin dynamics in terms of stability and accuracy at higher shear rates.

  13. 3D virtual human rapid modeling method based on top-down modeling mechanism

    Directory of Open Access Journals (Sweden)

    LI Taotao

    2017-01-01

    Full Text Available Aiming to satisfy the vast custom-made character demand of 3D virtual human and the rapid modeling in the field of 3D virtual reality, a new virtual human top-down rapid modeling method is put for-ward in this paper based on the systematic analysis of the current situation and shortage of the virtual hu-man modeling technology. After the top-level realization of virtual human hierarchical structure frame de-sign, modular expression of the virtual human and parameter design for each module is achieved gradu-al-level downwards. While the relationship of connectors and mapping restraints among different modules is established, the definition of the size and texture parameter is also completed. Standardized process is meanwhile produced to support and adapt the virtual human top-down rapid modeling practice operation. Finally, the modeling application, which takes a Chinese captain character as an example, is carried out to validate the virtual human rapid modeling method based on top-down modeling mechanism. The result demonstrates high modelling efficiency and provides one new concept for 3D virtual human geometric mod-eling and texture modeling.

  14. Development of a loop-mediated isothermal amplification method for rapid detection of pigeon circovirus.

    Science.gov (United States)

    Tsai, Shinn Shyong; Chang, Yeng Ling; Huang, Yen Li; Liu, Hung Jen; Ke, Guan Ming; Chiou, Chwei Jang; Hsieh, Yao Ching; Chang, Tsung Chou; Cheng, Li Ting; Chuang, Kuo Pin

    2014-05-01

    There are no effective antiviral treatments for pigeon circovirus (PiCV); thus, rapid diagnosis is critical for effective control of the disease caused by this virus. The recent development of a novel LAMP technique that amplifies nucleic acids rapidly with high specificity and sensitivity under isothermal conditions has overcome some of the deficiencies of nucleic-acid-based diagnostic tests. We established a LAMP method for rapid detection of PiCV using two pairs of primers that were designed from PiCV and compared its sensitivity and specificity with that of PCR. Amplification by LAMP was optimal at 63 °C for 60 min. The detection limit was nearly 0.5 pg of PiCV DNA, making it ten times more sensitive than PCR. There was no cross-reaction with porcine circovirus type 2 (PCV2), pigeon Trichomonas gallinae, or pigeon herpesvirus (PHV) under the same conditions. The assay also successfully detected the pathogen DNA in the tissues of infected pigeons. This is the first report indicating that LAMP is a valuable, rapid method of detecting PiCV with high sensitivity and specificity.

  15. A new alginate-based rapid method for determining coliforms in milk.

    Science.gov (United States)

    Chang, Su-sen; Gray, Peter M; Woo, Gun-Jo; Kang, Dong-Hyun

    2003-11-01

    A new rapid method for monitoring coliforms was developed on the basis of the instant gelling effects of alginate and calcium. The effectiveness of this new method in the detection of coliforms was evaluated. Tests involving Escherichia coli, Enterobacter cloacae, Klebsiella pneumoniae, total coliforms in milk, cold-injured coliforms, and total coliforms in raw milk were carried out. The bacterial samples were diluted in 0.2% peptone water containing 90 mM CaCl2 and added into test tubes containing modified purple broth base medium. Coliform concentrations were determined on the basis of the time of color change and gas production in the alginate tubes. All results obtained by the alginate method correlated strongly with those obtained by the conventional violet red bile agar (VRBA) plating method. The alginate method reduced detection time by 12 to 14 h compared with the conventional VRBA plating method. The alginate method can be applied in field studies more easily than melted-agar systems can. The results of this study indicate that the alginate method is an accurate, rapid, simple, and economical way to monitor and estimate concentrations of total coliforms in food.

  16. Current status and future perspectives on molecular and serological methods in diagnostic mycology.

    Science.gov (United States)

    Lau, Anna; Chen, Sharon; Sleiman, Sue; Sorrell, Tania

    2009-11-01

    Invasive fungal infections are an important cause of infectious morbidity. Nonculture-based methods are increasingly used for rapid, accurate diagnosis to improve patient outcomes. New and existing DNA amplification platforms have high sensitivity and specificity for direct detection and identification of fungi in clinical specimens. Since laboratories are increasingly reliant on DNA sequencing for fungal identification, measures to improve sequence interpretation should support validation of reference isolates and quality control in public gene repositories. Novel technologies (e.g., isothermal and PNA FISH methods), platforms enabling high-throughput analyses (e.g., DNA microarrays and Luminex xMAP) and/or commercial PCR assays warrant further evaluation for routine diagnostic use. Notwithstanding the advantages of molecular tests, serological assays remain clinically useful for patient management. The serum Aspergillus galactomannan test has been incorporated into diagnostic algorithms of invasive aspergillosis. Both the galactomannan and the serum beta-D-glucan test have value for diagnosing infection and monitoring therapeutic response.

  17. New method for vitrifying water and other liquids by rapid cooling of their aerosols

    Science.gov (United States)

    Mayer, Erwin

    1985-07-01

    A method for the vitrification of pure liquid water and dilute aqueous solutions is described which is the only one without a liquid cryomedium for heat transfer: rapid cooling of aqueous aerosol droplets on a solid cryoplate. This method is not limited to water and aqueous solutions, but can be used for the vitrification of any liquid aerosol, the only impurity being some codeposited vapor. The method can be applied in diverse fields such as cryobiology, cryomicroscopy, and low-temperature spectroscopy of water and dilute aqueous solutions to avoid the formation of crystalline ice.

  18. Rapid simulation of electromagnetic telemetry using an axisymmetric semianalytical finite element method

    Science.gov (United States)

    Chen, Jiefu; Zeng, Shubin; Dong, Qiuzhao; Huang, Yueqin

    2017-02-01

    An axisymmetric semianalytical finite element method is proposed and employed for rapid simulations of electromagnetic telemetry in layered underground formation. In this method, the layered media is decomposed into several subdomains and the interfaces between subdomains are discretized by conventional finite elements. Then a Riccati equation based high precision integration scheme is applied to exploit the homogeneity along the vertical direction in each layer. This semianalytical finite element scheme is very efficient in modeling electromagnetic telemetry in layered formation. Numerical examples as well as a field case with water based mud as drilling fluid are given to demonstrate the validity and effectiveness of this method.

  19. Accelerated molecular dynamics methods: introduction and recent developments

    Energy Technology Data Exchange (ETDEWEB)

    Uberuaga, Blas Pedro [Los Alamos National Laboratory; Voter, Arthur F [Los Alamos National Laboratory; Perez, Danny [Los Alamos National Laboratory; Shim, Y [UNIV OF TOLEDO; Amar, J G [UNIV OF TOLEDO

    2009-01-01

    A long-standing limitation in the use of molecular dynamics (MD) simulation is that it can only be applied directly to processes that take place on very short timescales: nanoseconds if empirical potentials are employed, or picoseconds if we rely on electronic structure methods. Many processes of interest in chemistry, biochemistry, and materials science require study over microseconds and beyond, due either to the natural timescale for the evolution or to the duration of the experiment of interest. Ignoring the case of liquids xxx, the dynamics on these time scales is typically characterized by infrequent-event transitions, from state to state, usually involving an energy barrier. There is a long and venerable tradition in chemistry of using transition state theory (TST) [10, 19, 23] to directly compute rate constants for these kinds of activated processes. If needed dynamical corrections to the TST rate, and even quantum corrections, can be computed to achieve an accuracy suitable for the problem at hand. These rate constants then allow them to understand the system behavior on longer time scales than we can directly reach with MD. For complex systems with many reaction paths, the TST rates can be fed into a stochastic simulation procedure such as kinetic Monte Carlo xxx, and a direct simulation of the advance of the system through its possible states can be obtained in a probabilistically exact way. A problem that has become more evident in recent years, however, is that for many systems of interest there is a complexity that makes it difficult, if not impossible, to determine all the relevant reaction paths to which TST should be applied. This is a serious issue, as omitted transition pathways can have uncontrollable consequences on the simulated long-time kinetics. Over the last decade or so, we have been developing a new class of methods for treating the long-time dynamics in these complex, infrequent-event systems. Rather than trying to guess in advance what

  20. Accurate Evaluation Method of Molecular Binding Affinity from Fluctuation Frequency

    Science.gov (United States)

    Hoshino, Tyuji; Iwamoto, Koji; Ode, Hirotaka; Ohdomari, Iwao

    2008-05-01

    Exact estimation of the molecular binding affinity is significantly important for drug discovery. The energy calculation is a direct method to compute the strength of the interaction between two molecules. This energetic approach is, however, not accurate enough to evaluate a slight difference in binding affinity when distinguishing a prospective substance from dozens of candidates for medicine. Hence more accurate estimation of drug efficacy in a computer is currently demanded. Previously we proposed a concept of estimating molecular binding affinity, focusing on the fluctuation at an interface between two molecules. The aim of this paper is to demonstrate the compatibility between the proposed computational technique and experimental measurements, through several examples for computer simulations of an association of human immunodeficiency virus type-1 (HIV-1) protease and its inhibitor (an example for a drug-enzyme binding), a complexation of an antigen and its antibody (an example for a protein-protein binding), and a combination of estrogen receptor and its ligand chemicals (an example for a ligand-receptor binding). The proposed affinity estimation has proven to be a promising technique in the advanced stage of the discovery and the design of drugs.

  1. RAPID METHOD FOR PLUTONIUM, AMERICIUM AND CURIUM IN VERY LARGE SOIL SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S

    2007-01-08

    The analysis of actinides in environmental soil and sediment samples is very important for environmental monitoring. There is a need to measure actinide isotopes with very low detection limits. A new, rapid actinide separation method has been developed and implemented that allows the measurement of plutonium, americium and curium isotopes in very large soil samples (100-200 g) with high chemical recoveries and effective removal of matrix interferences. This method uses stacked TEVA Resin{reg_sign}, TRU Resin{reg_sign} and DGA-Resin{reg_sign} cartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium (Pu), americium (Am), and curium (Cm) using a single multistage column combined with alpha spectrometry. The method combines an acid leach step and innovative matrix removal using cerium fluoride precipitation to remove the difficult soil matrix. This method is unique in that it provides high tracer recoveries and effective removal of interferences with small extraction chromatography columns instead of large ion exchange resin columns that generate large amounts of acid waste. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized.

  2. Longitudinal analysis of the temporal evolution of Acinetobacter baumannii strains in Ohio, USA, by using rapid automated typing methods.

    Directory of Open Access Journals (Sweden)

    Brooke K Decker

    Full Text Available Genotyping methods are essential to understand the transmission dynamics of Acinetobacter baumannii. We examined the representative genotypes of A. baumannii at different time periods in select locations in Ohio, using two rapid automated typing methods: PCR coupled with electrospray ionization mass spectrometry (PCR/ESI-MS, a form of multi-locus sequence typing (MLST, and repetitive-sequence-based-PCR (rep-PCR. Our analysis included 122 isolates from 4 referral hospital systems, in 2 urban areas of Ohio. These isolates were associated with outbreaks at 3 different time periods (1996, 2000 and 2005-2007. Type assignments of PCR/ESI-MS and rep-PCR were compared to each other and to worldwide (WW clone types. The discriminatory power of each method was determined using the Simpson's index of diversity (DI. We observed that PCR/ESI-MS sequence type (ST 14, corresponding to WW clone 3, predominated in 1996, whereas ST 12 and 14 co-existed in the intermediate period (2000 and ST 10 and 12, belonging to WW clone 2, predominated more recently in 2007. The shift from WW clone 3 to WW clone 2 was accompanied by an increase in carbapenem resistance. The DI was approximately 0.74 for PCR/ESI-MS, 0.88 for rep-PCR and 0.90 for the combination of both typing methods. We conclude that combining rapid automated typing methods such as PCR/ESI-MS and rep-PCR serves to optimally characterize the regional molecular epidemiology of A. baumannii. Our data also sheds light on the changing sequence types in an 11 year period in Northeast Ohio.

  3. Molecular Phylogenetic: Organism Taxonomy Method Based on Evolution History

    Directory of Open Access Journals (Sweden)

    N.L.P Indi Dharmayanti

    2011-03-01

    Full Text Available Phylogenetic is described as taxonomy classification of an organism based on its evolution history namely its phylogeny and as a part of systematic science that has objective to determine phylogeny of organism according to its characteristic. Phylogenetic analysis from amino acid and protein usually became important area in sequence analysis. Phylogenetic analysis can be used to follow the rapid change of a species such as virus. The phylogenetic evolution tree is a two dimensional of a species graphic that shows relationship among organisms or particularly among their gene sequences. The sequence separation are referred as taxa (singular taxon that is defined as phylogenetically distinct units on the tree. The tree consists of outer branches or leaves that represents taxa and nodes and branch represent correlation among taxa. When the nucleotide sequence from two different organism are similar, they were inferred to be descended from common ancestor. There were three methods which were used in phylogenetic, namely (1 Maximum parsimony, (2 Distance, and (3 Maximum likehoood. Those methods generally are applied to construct the evolutionary tree or the best tree for determine sequence variation in group. Every method is usually used for different analysis and data.

  4. Rapid Molecular Identification of Pathogenic Yeasts by Pyrosequencing Analysis of 35 Nucleotides of Internal Transcribed Spacer 2 ▿

    Science.gov (United States)

    Borman, Andrew M.; Linton, Christopher J.; Oliver, Debra; Palmer, Michael D.; Szekely, Adrien; Johnson, Elizabeth M.

    2010-01-01

    Rapid identification of yeast species isolates from clinical samples is particularly important given their innately variable antifungal susceptibility profiles. Here, we have evaluated the utility of pyrosequencing analysis of a portion of the internal transcribed spacer 2 region (ITS2) for identification of pathogenic yeasts. A total of 477 clinical isolates encompassing 43 different fungal species were subjected to pyrosequencing analysis in a strictly blinded study. The molecular identifications produced by pyrosequencing were compared with those obtained using conventional biochemical tests (AUXACOLOR2) and following PCR amplification and sequencing of the D1-D2 portion of the nuclear 28S large rRNA gene. More than 98% (469/477) of isolates encompassing 40 of the 43 fungal species tested were correctly identified by pyrosequencing of only 35 bp of ITS2. Moreover, BLAST searches of the public synchronized databases with the ITS2 pyrosequencing signature sequences revealed that there was only minimal sequence redundancy in the ITS2 under analysis. In all cases, the pyrosequencing signature sequences were unique to the yeast species (or species complex) under investigation. Finally, when pyrosequencing was combined with the Whatman FTA paper technology for the rapid extraction of fungal genomic DNA, molecular identification could be accomplished within 6 h from the time of starting from pure cultures. PMID:20702674

  5. Rapid microwave-assisted synthesis of molecularly imprinted polymers on carbon quantum dots for fluorescent sensing of tetracycline in milk.

    Science.gov (United States)

    Hou, Juan; Li, Huiyu; Wang, Long; Zhang, Ping; Zhou, Tianyu; Ding, Hong; Ding, Lan

    2016-01-01

    In this paper, a novel, selective and eco-friendly sensor for the detection of tetracycline was developed by grafting imprinted polymers onto the surface of carbon quantum dots. A simple microwave-assisted approach was utilized to fabricate the fluorescent imprinted composites rapidly for the first time, which could shorten the polymerization time and simplify the experimental procedure dramatically. The novel composites not only demonstrated excellent fluorescence stability and special binding sites, but also could selectively accumulate target analytes. Under optimal conditions, the relative fluorescence intensity of the composites decreased linearly with increasing the concentration of tetracycline from 20 nM to 14 µM. The detection limit of tetracycline was 5.48 nM. The precision and reproducibility of the proposed sensor were also acceptable. Significantly, the practicality of this ultrasensitive sensor for tetracycline detection in milk was further validated, revealing the advantages of simplicity, sensitivity, selectivity and low cost. This approach combines the high selective adsorption property of molecular imprinted polymers and the sensitivity of fluorescence detection. It is envisioned that the development of fluorescent molecularly imprinted composites will offer a new way of thinking for rapid analysis in complex samples. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. A novel sample preparation method using rapid nonheated saponification method for the determination of cholesterol in emulsified foods.

    Science.gov (United States)

    Jeong, In-Seek; Kwak, Byung-Man; Ahn, Jang-Hyuk; Leem, Donggil; Yoon, Taehyung; Yoon, Changyong; Jeong, Jayoung; Park, Jung-Min; Kim, Jin-Man

    2012-10-01

    In this study, nonheated saponification was employed as a novel, rapid, and easy sample preparation method for the determination of cholesterol in emulsified foods. Cholesterol content was analyzed using gas chromatography with a flame ionization detector (GC-FID). The cholesterol extraction method was optimized for maximum recovery from baby food and infant formula. Under these conditions, the optimum extraction solvent was 10 mL ethyl ether per 1 to 2 g sample, and the saponification solution was 0.2 mL KOH in methanol. The cholesterol content in the products was determined to be within the certified range of certified reference materials (CRMs), NIST SRM 1544 and SRM 1849. The results of the recovery test performed using spiked materials were in the range of 98.24% to 99.45% with an relative standard devitation (RSD) between 0.83% and 1.61%. This method could be used to reduce sample pretreatment time and is expected to provide an accurate determination of cholesterol in emulsified food matrices such as infant formula and baby food. A novel, rapid, and easy sample preparation method using nonheated saponification was developed for cholesterol detection in emulsified foods. Recovery tests of CRMs were satisfactory, and the recoveries of spiked materials were accurate and precise. This method was effective and decreased the time required for analysis by 5-fold compared to the official method. © 2012 Institute of Food Technologists®

  7. A Rapid and Economical Method for Efficient DNA Extraction from Diverse Soils Suitable for Metagenomic Applications.

    Directory of Open Access Journals (Sweden)

    Selvaraju Gayathri Devi

    Full Text Available A rapid, cost effective method of metagenomic DNA extraction from soil is a useful tool for environmental microbiology. The present work describes an improved method of DNA extraction namely "powdered glass method" from diverse soils. The method involves the use of sterile glass powder for cell lysis followed by addition of 1% powdered activated charcoal (PAC as purifying agent to remove humic substances. The method yielded substantial DNA (5.87 ± 0.04 μg/g of soil with high purity (A260/280: 1.76 ± 0.05 and reduced humic substances (A340: 0.047 ± 0.03. The quality of the extracted DNA was compared against five different methods based on 16S rDNA PCR amplification, BamHI digestion and validated using quantitative PCR. The digested DNA was used for a metagenomic library construction with the transformation efficiency of 4 X 106 CFU mL-1. Besides providing rapid, efficient and economical extraction of metgenomic DNA from diverse soils, this method's applicability is also demonstrated for cultivated organisms (Gram positive B. subtilis NRRL-B-201, Gram negative E. coli MTCC40, and a microalgae C. sorokiniana UTEX#1666.

  8. A Rapid and Economical Method for Efficient DNA Extraction from Diverse Soils Suitable for Metagenomic Applications.

    Science.gov (United States)

    Devi, Selvaraju Gayathri; Fathima, Anwar Aliya; Radha, Sudhakar; Arunraj, Rex; Curtis, Wayne R; Ramya, Mohandass

    2015-01-01

    A rapid, cost effective method of metagenomic DNA extraction from soil is a useful tool for environmental microbiology. The present work describes an improved method of DNA extraction namely "powdered glass method" from diverse soils. The method involves the use of sterile glass powder for cell lysis followed by addition of 1% powdered activated charcoal (PAC) as purifying agent to remove humic substances. The method yielded substantial DNA (5.87 ± 0.04 μg/g of soil) with high purity (A260/280: 1.76 ± 0.05) and reduced humic substances (A340: 0.047 ± 0.03). The quality of the extracted DNA was compared against five different methods based on 16S rDNA PCR amplification, BamHI digestion and validated using quantitative PCR. The digested DNA was used for a metagenomic library construction with the transformation efficiency of 4 X 106 CFU mL-1. Besides providing rapid, efficient and economical extraction of metgenomic DNA from diverse soils, this method's applicability is also demonstrated for cultivated organisms (Gram positive B. subtilis NRRL-B-201, Gram negative E. coli MTCC40, and a microalgae C. sorokiniana UTEX#1666).

  9. Simple and rapid method for the isolation of forskolin from Coleus forskohlii by charcoal column chromatography.

    Science.gov (United States)

    Saleem, A M; Dhasan, P B; Rafiullah, M R M

    2006-01-06

    A simple, safe, rapid and economical method was developed for the isolation of high-purity forskolin from Coleus forskohlii roots using activated charcoal as an adsorbent in a column. The elution was carried out under reduced pressure to make the process rapid. Activated charcoal acted as a reversed phase adsorbent and allowed elution of forskolin without much impurities. The residue, obtained from the eluate was purified and crystallized using different solvent mixtures to obtain pure forskolin. The forskolin isolated was analyzed and characterized by UV, IR, RP-HPLC, electrospray ionization MS, 1H NMR and 13C NMR. The yield was 0.097% w/w (RSD 5.6%). The purity was 96.9% w/w (RSD 0.3%) as determined by RP-HPLC. The present method enables researchers to produce high-purity forskolin in their labs by using common chemicals.

  10. Evaluation of methods for rapid determination of freezing point of aviation fuels

    Science.gov (United States)

    Mathiprakasam, B.

    1982-01-01

    Methods for identification of the more promising concepts for the development of a portable instrument to rapidly determine the freezing point of aviation fuels are described. The evaluation process consisted of: (1) collection of information on techniques previously used for the determination of the freezing point, (2) screening and selection of these techniques for further evaluation of their suitability in a portable unit for rapid measurement, and (3) an extensive experimental evaluation of the selected techniques and a final selection of the most promising technique. Test apparatuses employing differential thermal analysis and the change in optical transparency during phase change were evaluated and tested. A technique similar to differential thermal analysis using no reference fuel was investigated. In this method, the freezing point was obtained by digitizing the data and locating the point of inflection. Results obtained using this technique compare well with those obtained elsewhere using different techniques. A conceptual design of a portable instrument incorporating this technique is presented.

  11. Rapid Analysis of Apolar Low Molecular Weight Constituents in Wood Using High Pressure Liquid Chromatography with Evaporative Light Scattering Detection

    NARCIS (Netherlands)

    Claassen, F.W.; Haar, van de C.; Beek, van T.A.; Dorado, J.; Martinez-Inigo, M.; Sierra-Alvarez, R.

    2000-01-01

    A new high pressure liquid chromatographic method with evaporative light scattering detection was developed for the qualitative and quantitative analysis of apolar, low molecular weight constituents in wood. The wood extractives were obtained by means of a 6 h Soxhlet extraction with acetone. The

  12. Preparation of magnetic molecularly imprinted polymers by atom transfer radical polymerization for the rapid extraction of avermectin from fish samples.

    Science.gov (United States)

    You, Xiaoxiao; Gao, Lei; Qin, Dongli; Chen, Ligang

    2017-01-01

    A novel and highly efficient approach to obtain magnetic molecularly imprinted polymers is described to detect avermectin in fish samples. The magnetic molecularly imprinted polymers were synthesized by surface imprinting polymerization using magnetic multiwalled carbon nanotubes as the support materials, atom transfer radical polymerization as the polymerization method, avermectin as template, acrylamide as functional monomer, and ethylene glycol dimethacrylate as crosslinker. The characteristics of the magnetic molecularly imprinted polymers were assessed by using transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, vibrating sample magnetometry, X-ray diffraction, and thermogravimetric analysis. The binding characteristics of magnetic molecularly imprinted polymers were researched through isothermal adsorption experiment, kinetics adsorption experiment, and the selectivity experiment. Coupled with ultra high performance liquid chromatography and tandem mass spectrometry, the extraction conditions of the magnetic molecularly imprinted polymers as adsorbents for avermectin were investigated in detail. The recovery of avermectin was 84.2-97.0%, and the limit of detection was 0.075 μg/kg. Relative standard deviations of intra- and inter-day precisions were in the range of 1.7-2.9% and 3.4-5.6%, respectively. The results demonstrated that the extraction method not only has high selectivity and accuracy, but also is convenient for the determination of avermectin in fish samples. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Novel methods for improving rapid paper-based protein assays with gold nanoparticle detection

    OpenAIRE

    Lama, Lara

    2017-01-01

    This thesis describes methods for improving sensitivity in rapid singleplex and multiplex microarray assays. The assays utilize the optical characteristics of colloidal gold nanoparticles for the colorimetric detection of proteins. Multiplexed detection in sandwich immunoassays is limited by cross-reactivity between different detection antibodies. The cross-reactivity between antibodies can contribute to increased background noise - decreasing the Limit-of-Detection of the assay - or generate...

  14. Rapid direct methods for enumeration of specific, active bacteria in water and biofilms

    Science.gov (United States)

    McFeters, G. A.; Pyle, B. H.; Lisle, J. T.; Broadaway, S. C.

    1999-01-01

    Conventional methods for detecting indicator and pathogenic bacteria in water may underestimate the actual population due to sublethal environmental injury, inability of the target bacteria to take up nutrients and other physiological factors which reduce bacterial culturability. Rapid and direct methods are needed to more accurately detect and enumerate active bacteria. Such a methodological advance would provide greater sensitivity in assessing the microbiological safety of water and food. The principle goal of this presentation is to describe novel approaches we have formulated for the rapid and simultaneous detection of bacteria plus the determination of their physiological activity in water and other environmental samples. The present version of our method involves the concentration of organisms by membrane filtration or immunomagnetic separation and combines an intracellular fluorochrome (CTC) for assessment of respiratory activity plus fluorescent-labelled antibody detection of specific bacteria. This approach has also been successfully used to demonstrate spatial and temporal heterogeneities of physiological activities in biofilms when coupled with cryosectioning. Candidate physiological stains include those capable of determining respiratory activity, membrane potential, membrane integrity, growth rate and cellular enzymatic activities. Results obtained thus far indicate that immunomagnetic separation can provide a high degree of sensitivity in the recovery of seeded target bacteria (Escherichia coli O157:H7) in water and hamburger. The captured and stained target bacteria are then enumerated by either conventional fluorescence microscopy or ChemScan(R), a new instrument that is very sensitive and rapid. The ChemScan(R) laser scanning instrument (Chemunex, Paris, France) provides the detection of individual fluorescently labelled bacterial cells using three emission channels in less than 5 min. A high degree of correlation has been demonstrated between

  15. New multiplex PCR methods for rapid screening of genetically modified organisms in foods

    OpenAIRE

    Nelly eDatukishvili; Tamara eKutateladze; Inga eGabriadze; Kakha eBitskinashvili; Boris eVishnepolsky

    2015-01-01

    We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs). New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV) 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS) terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps) gene and 258 bp fragment of C...

  16. The rapidly evolving therapies for advanced melanoma--Towards immunotherapy, molecular targeted therapy, and beyond.

    Science.gov (United States)

    Zhu, Ziqiang; Liu, Wei; Gotlieb, Vladimir

    2016-03-01

    The incidence of melanoma in both males and females continues to rise during the past 40 years despite the stable or declining trends for most cancer types. Due to the tremendous advance in immunobiology and molecular biology, breakthroughs in both immunotherapies and molecular targeted therapies have recently revolutionized the standard of care for patients with advanced melanoma. In 2011, US Food and Drug Administration (FDA) approved ipilimumab, an anti-cytotoxic T-lymphocyte antigen-4 (CTLA-4) antibody for metastatic melanoma therapy. Since then, novel drugs including antibodies to programmed cell death 1 (PD-1) such as pembrolizumab and nivolumab (both approved in 2014), selective BRAF inhibitors such as vemurafenib (approved in 2011), dabrafenib (approved in 2013); and MEK inhibitor trametinib (approved in 2013), have greatly extended the potential of immunotherapy and molecular targeted therapy for advanced melanoma. All of which have been demonstrated a significant increase in overall survival rate, and long-term benefits in multiple large clinical trials. Several new agents and novel therapies are currently under phase III clinical trials with the hope of being approved in the near future. We already entered a golden era in oncology that are providing significant survival improvement. In the meantime, new challenges for clinicians also started to emerge. In this review, we presented the existing evidence for the newest treatments for advanced melanoma, including CTLA-4, PD-1/PD-L1 checkpoint inhibitors and BRAF, MEK inhibitors. We also discussed the strengths, limitations and challenges of using these novel therapies, and potential solutions as well as highlighted the areas requiring further research. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  17. An overview of molecular marker methods for plants | Semagn ...

    African Journals Online (AJOL)

    The development and use of molecular markers for the detection and exploitation of DNA polymorphism is one of the most significant developments in the field of molecular genetics. The presence of various types of molecular markers, and differences in their principles, methodologies, and applications require careful ...

  18. Conventional rapid latex agglutination in estimation of von Willebrand factor: method revisited and potential clinical applications.

    Science.gov (United States)

    Mahat, Marianor; Abdullah, Wan Zaidah; Hussin, Che Maraina Che

    2014-01-01

    Measurement of von Willebrand factor antigen (VWF : Ag) levels is usually performed in a specialised laboratory which limits its application in routine clinical practice. So far, no commercial rapid test kit is available for VWF : Ag estimation. This paper discusses the technical aspect of latex agglutination method which was established to suit the purpose of estimating von Willebrand factor (VWF) levels in the plasma sample. The latex agglutination test can be performed qualitatively and semiquantitatively. Reproducibility, stability, linearity, limit of detection, interference, and method comparison studies were conducted to evaluate the performance of this test. Semiquantitative latex agglutination test was strongly correlated with the reference immunoturbidimetric assay (Spearman's rho = 0.946, P agglutination test and the reference assay. Using the scoring system for the rapid latex test, no agglutination is with 0% VWF : Ag (control negative), 1+ reaction is equivalent to 150% VWF : Ag (when comparing with immunoturbidimetric assay). The findings from evaluation studies suggest that latex agglutination method is suitable to be used as a rapid test kit for the estimation of VWF : Ag levels in various clinical conditions associated with high levels and low levels of VWF : Ag.

  19. A direct and rapid method to determine cyanide in urine by capillary electrophoresis.

    Science.gov (United States)

    Zhang, Qiyang; Maddukuri, Naveen; Gong, Maojun

    2015-10-02

    Cyanides are poisonous chemicals that widely exist in nature and industrial processes as well as accidental fires. Rapid and accurate determination of cyanide exposure would facilitate forensic investigation, medical diagnosis, and chronic cyanide monitoring. Here, a rapid and direct method was developed for the determination of cyanide ions in urinary samples. This technique was based on an integrated capillary electrophoresis system coupled with laser-induced fluorescence (LIF) detection. Cyanide ions were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) and a primary amine (glycine) for LIF detection. Three separate reagents, NDA, glycine, and cyanide sample, were mixed online, which secured uniform conditions between samples for cyanide derivatization and reduced the risk of precipitation formation of mixtures. Conditions were optimized; the derivatization was completed in 2-4min, and the separation was observed in 25s. The limit of detection (LOD) was 4.0nM at 3-fold signal-to-noise ratio for standard cyanide in buffer. The cyanide levels in urine samples from smokers and non-smokers were determined by using the method of standard addition, which demonstrated significant difference of cyanide levels in urinary samples from the two groups of people. The developed method was rapid and accurate, and is anticipated to be applicable to cyanide detection in waste water with appropriate modification. Published by Elsevier B.V.

  20. GSMA: Gene Set Matrix Analysis, An Automated Method for Rapid Hypothesis Testing of Gene Expression Data

    Directory of Open Access Journals (Sweden)

    Chris Cheadle

    2007-01-01

    Full Text Available Background: Microarray technology has become highly valuable for identifying complex global changes in gene expression patterns. The assignment of functional information to these complex patterns remains a challenging task in effectively interpreting data and correlating results from across experiments, projects and laboratories. Methods which allow the rapid and robust evaluation of multiple functional hypotheses increase the power of individual researchers to data mine gene expression data more efficiently.Results: We have developed (gene set matrix analysis GSMA as a useful method for the rapid testing of group-wise up- or downregulation of gene expression simultaneously for multiple lists of genes (gene sets against entire distributions of gene expression changes (datasets for single or multiple experiments. The utility of GSMA lies in its flexibility to rapidly poll gene sets related by known biological function or as designated solely by the end-user against large numbers of datasets simultaneously.Conclusions: GSMA provides a simple and straightforward method for hypothesis testing in which genes are tested by groups across multiple datasets for patterns of expression enrichment.

  1. A Rapid Molecular Test for Determining Yersinia pestis Susceptibility to Ciprofloxacin by the Quantification of Differentially Expressed Marker Genes

    Directory of Open Access Journals (Sweden)

    Ida eSteinberger-Levy

    2016-05-01

    Full Text Available Standard antimicrobial susceptibility tests used to determine bacterial susceptibility to antibiotics are growth dependent and time consuming. The long incubation time required for standard tests may render susceptibility results irrelevant, particularly for patients infected with lethal bacteria that are slow growing on agar but progress rapidly in vivo, such as Yersinia pestis. Here, we present an alternative approach for the rapid determination of antimicrobial susceptibility, based on the quantification of the changes in the expression levels of specific marker genes following exposure to growth-inhibiting concentrations of the antibiotic, using Y. pestis and ciprofloxacin as a model. The marker genes were identified by transcriptomic DNA microarray analysis of the virulent Y. pestis Kimberley53 strain after exposure to specific concentrations of ciprofloxacin for various time periods. We identified several marker genes that were induced following exposure to growth-inhibitory concentrations of ciprofloxacin, and we confirmed the marker expression profiles at additional ciprofloxacin concentrations using quantitative RT-PCR. Eleven candidate marker transcripts were identified, of which four mRNA markers were selected for a rapid quantitative RT-PCR susceptibility test that correctly determined the Minimal Inhibitory Concentration (MIC values and the categories of susceptibility of several Y. pestis strains and isolates harboring various ciprofloxacin MIC values. The novel molecular susceptibility test requires just 2 h of antibiotic exposure in a 7-h overall test time, in contrast to the 24 h of antibiotic exposure required for a standard microdilution test.

  2. Diffusion energy profiles in silica mesoporous molecular sieves modelled with the fragment molecular orbital method

    Science.gov (United States)

    Roskop, Luke; Fedorov, Dmitri G.; Gordon, Mark S.

    2013-07-01

    The fragment molecular orbital (FMO) method is used to model truncated portions of mesoporous silica nanoparticle (MSN) pores. The application of the FMO/RHF (restricted Hartree-Fock) method to MCM-41 type MSNs is discussed and an error analysis is given. The FMO/RHF method is shown to reliably approximate the RHF energy (error ∼0.2 kcal/mol), dipole moment (error ∼0.2 debye) and energy gradient (root mean square [RMS] error ∼0.2 × 10-3 a.u./bohr). Several FMO fragmentation schemes are employed to provide guidance for future applications to MSN models. An MSN pore model is functionalised with (phenyl)propyl substituents and the diffusion barrier for benzene passing through the pore is computed by the FMO/RHF-D method with the Grimme dispersion correction (RHF-D). For the reaction coordinates examined here, the maximum FMO/RHF-D interaction energies range from -0.3 to -5.8 kcal/mol.

  3. Rapid and molecular selective electrochemical sensing of phthalates in aqueous solution

    KAUST Repository

    Zia, Asif I.

    2015-05-01

    Reported research work presents real time non-invasive detection of phthalates in spiked aqueous samples by employing electrochemical impedance spectroscopy (EIS) technique incorporating a novel interdigital capacitive sensor with multiple sensing thin film gold micro-electrodes fabricated on native silicon dioxide layer grown on semiconducting single crystal silicon wafer. The sensing surface was functionalized by a self-assembled monolayer of 3-aminopropyltrietoxysilane (APTES) with embedded molecular imprinted polymer (MIP) to introduce selectivity for the di(2-ethylhexyl) phthalate (DEHP) molecule. Various concentrations (1-100. ppm) of DEHP in deionized MilliQ water were tested using the functionalized sensing surface to capture the analyte. Frequency response analyzer (FRA) algorithm was used to obtain impedance spectra so as to determine sample conductance and capacitance for evaluation of phthalate concentration in the sample solution. Spectrum analysis algorithm interpreted the experimentally obtained impedance spectra by applying complex nonlinear least square (CNLS) curve fitting in order to obtain electrochemical equivalent circuit and corresponding circuit parameters describing the kinetics of the electrochemical cell. Principal component analysis was applied to deduce the effects of surface immobilized molecular imprinted polymer layer on the evaluated circuit parameters and its electrical response. The results obtained by the testing system were validated using commercially available high performance liquid chromatography diode array detector system.

  4. Conventional and molecular methods used in the detection and subtyping of Yersinia enterocolitica in food.

    Science.gov (United States)

    Petsios, Stefanos; Fredriksson-Ahomaa, Maria; Sakkas, Hercules; Papadopoulou, Chrissanthy

    2016-11-21

    Yersinia enterocolitica is an important foodborne pathogen, but the prevalence in food is underestimated due to drawbacks in the detection methods. Problems arise from the low concentration of pathogenic strains present in food samples, similarities with other Enterobacteriaceae and Y. enterocolitica-like species and the heterogeneity of Y. enterocolitica as it comprises both pathogenic and non-pathogenic isolates. New rapid, cost-effective and more sensitive culture media and molecular techniques have been developed to overcome the drawbacks of conventional culture methods. Recent molecular subtyping methods have been applied to Y. enterocolitica strains to track infection sources and to investigate phylogenetic relationships between different Yersinia strains. Further application of modern subtyping tools such as WGS in a variety of bioserotypes, and comparison with other members of the genus will help to better understanding of the virulence determinants of pathogenic Y. enterocolitica, its mechanisms to cope in the host environments, and can contribute to the development of more specific detection and typing strategies.

  5. Interactive Rapid Dose Assessment Model (IRDAM): reactor-accident assessment methods. Vol. 2

    Energy Technology Data Exchange (ETDEWEB)

    Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

    1983-05-01

    As part of the continuing emphasis on emergency preparedness, the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This document describes the technical bases for IRDAM including methods, models and assumptions used in calculations. IRDAM calculates whole body (5-cm depth) and infant thyroid doses at six fixed downwind distances between 500 and 20,000 meters. Radionuclides considered primarily consist of noble gases and radioiodines. In order to provide a rapid assessment capability consistent with the capacity of the Osborne-1 computer, certain simplifying approximations and assumptions are made. These are described, along with default values (assumptions used in the absence of specific input) in the text of this document. Two companion volumes to this one provide additional information on IRDAM. The user's Guide (NUREG/CR-3012, Volume 1) describes the setup and operation of equipment necessary to run IRDAM. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios.

  6. Comparison of concentration methods for rapid detection of hookworm ova in wastewater matrices using quantitative PCR.

    Science.gov (United States)

    Gyawali, P; Ahmed, W; Jagals, P; Sidhu, J P S; Toze, S

    2015-12-01

    Hookworm infection contributes around 700 million infections worldwide especially in developing nations due to increased use of wastewater for crop production. The effective recovery of hookworm ova from wastewater matrices is difficult due to their low concentrations and heterogeneous distribution. In this study, we compared the recovery rates of (i) four rapid hookworm ova concentration methods from municipal wastewater, and (ii) two concentration methods from sludge samples. Ancylostoma caninum ova were used as surrogate for human hookworm (Ancylostoma duodenale and Necator americanus). Known concentration of A. caninum hookworm ova were seeded into wastewater (treated and raw) and sludge samples collected from two wastewater treatment plants (WWTPs) in Brisbane and Perth, Australia. The A. caninum ova were concentrated from treated and raw wastewater samples using centrifugation (Method A), hollow fiber ultrafiltration (HFUF) (Method B), filtration (Method C) and flotation (Method D) methods. For sludge samples, flotation (Method E) and direct DNA extraction (Method F) methods were used. Among the four methods tested, filtration (Method C) method was able to recover higher concentrations of A. caninum ova consistently from treated wastewater (39-50%) and raw wastewater (7.1-12%) samples collected from both WWTPs. The remaining methods (Methods A, B and D) yielded variable recovery rate ranging from 0.2 to 40% for treated and raw wastewater samples. The recovery rates for sludge samples were poor (0.02-4.7), although, Method F (direct DNA extraction) provided 1-2 orders of magnitude higher recovery rate than Method E (flotation). Based on our results it can be concluded that the recovery rates of hookworm ova from wastewater matrices, especially sludge samples, can be poor and highly variable. Therefore, choice of concentration method is vital for the sensitive detection of hookworm ova in wastewater matrices. Crown Copyright © 2015. Published by Elsevier

  7. Rapid Determination of Isomeric Benzoylpaeoniflorin and Benzoylalbiflorin in Rat Plasma by LC-MS/MS Method

    Directory of Open Access Journals (Sweden)

    Chuanqi Zhou

    2017-01-01

    Full Text Available Benzoylpaeoniflorin (BP is a potential therapeutic agent against oxidative stress related Alzheimer’s disease. In this study, a more rapid, selective, and sensitive liquid chromatography-tandem mass spectrometric (LC-MS/MS method was developed to determine BP in rat plasma distinguishing with a monoterpene isomer, benzoylalbiflorin (BA. The method showed a linear response from 1 to 1000 ng/mL (r>0.9950. The precision of the interday and intraday ranged from 2.03 to 12.48% and the accuracy values ranged from −8.00 to 10.33%. Each running of the method could be finished in 4 minutes. The LC-MS/MS method was validated for specificity, linearity, precision, accuracy, recovery, and stability and was found to be acceptable for bioanalytical application. Finally, this fully validated method was successfully applied to a pharmacokinetic study in rats following oral administration.

  8. Multifrequency excitation method for rapid and accurate dynamic test of micromachined gyroscope chips.

    Science.gov (United States)

    Deng, Yan; Zhou, Bin; Xing, Chao; Zhang, Rong

    2014-10-17

    A novel multifrequency excitation (MFE) method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE) method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

  9. Multifrequency Excitation Method for Rapid and Accurate Dynamic Test of Micromachined Gyroscope Chips

    Directory of Open Access Journals (Sweden)

    Yan Deng

    2014-10-01

    Full Text Available A novel multifrequency excitation (MFE method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

  10. A Microfluidic Channel Method for Rapid Drug-Susceptibility Testing of Pseudomonas aeruginosa

    Science.gov (United States)

    Matsumoto, Yoshimi; Grushnikov, Andrey; Kikuchi, Kazuma; Noji, Hiroyuki; Yamaguchi, Akihito; Yagi, Yasushi

    2016-01-01

    The recent global increase in the prevalence of antibiotic-resistant bacteria and lack of development of new therapeutic agents emphasize the importance of selecting appropriate antimicrobials for the treatment of infections. However, to date, the development of completely accelerated drug susceptibility testing methods has not been achieved despite the availability of a rapid identification method. We proposed an innovative rapid method for drug susceptibility testing for Pseudomonas aeruginosa that provides results within 3 h. The drug susceptibility testing microfluidic (DSTM) device was prepared using soft lithography. It consisted of five sets of four microfluidic channels sharing one inlet slot, and the four channels are gathered in a small area, permitting simultaneous microscopic observation. Antimicrobials were pre-introduced into each channel and dried before use. Bacterial suspensions in cation-adjusted Mueller–Hinton broth were introduced from the inlet slot and incubated for 3 h. Susceptibilities were microscopically evaluated on the basis of differences in cell numbers and shapes between drug-treated and control cells, using dedicated software. The results of 101 clinically isolated strains of P. aeruginosa obtained using the DSTM method strongly correlated with results obtained using the ordinary microbroth dilution method. Ciprofloxacin, meropenem, ceftazidime, and piperacillin caused elongation in susceptible cells, while meropenem also induced spheroplast and bulge formation. Morphological observation could alternatively be used to determine the susceptibility of P. aeruginosa to these drugs, although amikacin had little effect on cell shape. The rapid determination of bacterial drug susceptibility using the DSTM method could also be applicable to other pathogenic species, and it could easily be introduced into clinical laboratories without the need for expensive instrumentation. PMID:26872134

  11. A Microfluidic Channel Method for Rapid Drug-Susceptibility Testing of Pseudomonas aeruginosa.

    Directory of Open Access Journals (Sweden)

    Yoshimi Matsumoto

    Full Text Available The recent global increase in the prevalence of antibiotic-resistant bacteria and lack of development of new therapeutic agents emphasize the importance of selecting appropriate antimicrobials for the treatment of infections. However, to date, the development of completely accelerated drug susceptibility testing methods has not been achieved despite the availability of a rapid identification method. We proposed an innovative rapid method for drug susceptibility testing for Pseudomonas aeruginosa that provides results within 3 h. The drug susceptibility testing microfluidic (DSTM device was prepared using soft lithography. It consisted of five sets of four microfluidic channels sharing one inlet slot, and the four channels are gathered in a small area, permitting simultaneous microscopic observation. Antimicrobials were pre-introduced into each channel and dried before use. Bacterial suspensions in cation-adjusted Mueller-Hinton broth were introduced from the inlet slot and incubated for 3 h. Susceptibilities were microscopically evaluated on the basis of differences in cell numbers and shapes between drug-treated and control cells, using dedicated software. The results of 101 clinically isolated strains of P. aeruginosa obtained using the DSTM method strongly correlated with results obtained using the ordinary microbroth dilution method. Ciprofloxacin, meropenem, ceftazidime, and piperacillin caused elongation in susceptible cells, while meropenem also induced spheroplast and bulge formation. Morphological observation could alternatively be used to determine the susceptibility of P. aeruginosa to these drugs, although amikacin had little effect on cell shape. The rapid determination of bacterial drug susceptibility using the DSTM method could also be applicable to other pathogenic species, and it could easily be introduced into clinical laboratories without the need for expensive instrumentation.

  12. High resolution melting curve analysis, a rapid and affordable method for mutation analysis in childhood acute myeloid leukemia

    Directory of Open Access Journals (Sweden)

    Yin eLiu

    2014-09-01

    Full Text Available Background: Molecular genetic alterations with prognostic significance have been described in childhood acute myeloid leukemia (AML. The aim of this study was to establish cost-effective techniques to detect mutations of FMS-like tyrosine kinase 3 (FLT3, Nucleophosmin 1 (NPM1, and a partial tandem duplication within the mixed lineage leukemia (MLL-PTD genes in childhood AML. Procedure: Ninety-nine children with newly diagnosed AML were included in this study. We developed a fluoresent dye SYTO-82 based high resolution melting curve (HRM anaylsis to detect FLT3 internal tandem duplication (FLT3-ITD, FLT3 tyrosine kinase domain (FLT3-TKD and NPM1 mutations. MLL-PTD was screened by real-time quantitative PCR. Results: The HRM methodology correlated well with gold standard Sanger sequencing with less cost. Among the 99 patients studied, the FLT3-ITD mutation was associated with significantly worse event free survival (EFS. Patients with the NPM1 mutation had significantly better EFS and overall survival. However, HRM was not sensitive enough for minimal residual disease monitoring. Conclusions: HRM was a rapid and efficient method for screening of FLT3 and NPM1 gene mutations. It was both affordable and accurate, especially in resource underprivileged regions. Our results indicated that HRM could be a useful clinical tool for rapid and cost effective screening of the FLT3 and NPM1 mutations in AML patients.

  13. LC-ESI/MS/MS method for rapid screening and confirmation of 44 exogenous anabolic steroids in human urine.

    Science.gov (United States)

    Jeon, Byoung Wook; Yoo, Hye Hyun; Jeong, Eun Sook; Kim, Ho Jun; Jin, Changbae; Kim, Dong Hyun; Lee, Jaeick

    2011-09-01

    A sensitive and rapid method based on liquid chromatography-triple-quadrupole tandem mass spectrometry (LC-MS/MS) with electrospray ionization (ESI) has been developed and validated for the screening and confirmation of 44 exogenous anabolic steroids (29 parent steroids and 15 metabolites) in human urine. The method involves an enzymatic hydrolysis, liquid-liquid extraction, and detection by LC-MS/MS. A triple-quadrupole mass spectrometer was operated in positive ESI mode with selected reaction monitoring (SRM) mode for the screening and product ion scan mode for the confirmation. The protonated molecular ions were used as precursor ions for the SRM analysis and product ion scan. The intraday and interday precisions of the target analytes at concentrations of the minimum required performance levels for the screening were 2-14% and 2-15%, respectively. The limits of detection for the screening and confirmation method were 0.1-10 ng/mL and 0.2-10 ng/mL, respectively, for 44 steroids. This method was successfully applied to analysis of urine samples from suspected anabolic steroid abusers.

  14. Adjustment of a rapid method for quantification of Fusarium spp. spore suspensions in plant pathology.

    Science.gov (United States)

    Caligiore-Gei, Pablo F; Valdez, Jorge G

    2015-01-01

    The use of a Neubauer chamber is a broadly employed method when cell suspensions need to be quantified. However, this technique may take a long time and needs trained personnel. Spectrophotometry has proved to be a rapid, simple and accurate method to estimate the concentration of spore suspensions of isolates of the genus Fusarium. In this work we present a linear formula to relate absorbance measurements at 530nm with the number of microconidia/ml in a suspension. Copyright © 2014 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  15. Rapid method for protein quantitation by Bradford assay after elimination of the interference of polysorbate 80.

    Science.gov (United States)

    Cheng, Yongfeng; Wei, Haiming; Sun, Rui; Tian, Zhigang; Zheng, Xiaodong

    2016-02-01

    Bradford assay is one of the most common methods for measuring protein concentrations. However, some pharmaceutical excipients, such as detergents, interfere with Bradford assay even at low concentrations. Protein precipitation can be used to overcome sample incompatibility with protein quantitation. But the rate of protein recovery caused by acetone precipitation is only about 70%. In this study, we found that sucrose not only could increase the rate of protein recovery after 1 h acetone precipitation, but also did not interfere with Bradford assay. So we developed a method for rapid protein quantitation in protein drugs even if they contained interfering substances. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Comparison of the NIDS® rapid assay with ELISA methods in immunogenicity testing of two biotherapeutics.

    Science.gov (United States)

    Pan, Jing; Small, Thomas; Qin, Dujie; Li, Shawn; Wang, Li; Chen, Dave; Pauley, Cindy; Verch, Thorsten; Kaplanski, Catherine; Bakhtiar, Ray; Vallejo, Yli Remo; Yin, Ray

    2011-01-01

    Rapid lateral flow immunogenicity assays for the detection of anti-drug antibodies (ADAs) to two biotherapeutic antibodies, an anti-HER2 antibody and an anti-TNF-α antibody, were developed using ANP Technologies, Inc.'s proprietary Nano-Intelligent Detection System (NIDS®) and compared to their ELISA counterparts. Biotin and hapten-labeled drugs are incubated with the patient serum sample to allow ADA to form a bridge complex with each drug conjugate. The reaction mixture is then added to a test strip with an anti-hapten capture zone which captures the mixed bridge complex. The bridge-complexed biotinylated drug then reacts with streptavidin-labeled gold particles in situ. The signal developed at the capture zone, which is directly proportional to ADA in the sample, is then quantitatively measured with a handheld reader. The counterpart ELISAs were run using the same reagents. Dose-response, specificity/free drug depletion, and screening cut-point assays were performed using both methods. The rapid assays' performance compare very closely to their ELISA counterparts'. Both types of assays identified the same positive samples in screening a limited population of 50 normal serum samples for the anti-HER2 antibody. In the case of anti-TNF-α, both assays identified the same positive samples out of 50 normal and 20 rheumatoid arthritis patient serum samples but differed in the assessment of two others. The rapid assay correctly identified as negative an ELISA false positive sample, and correctly tested as positive an ELISA false negative sample. Positive results were verified with a specificity/free drug depletion assay. The NIDS® rapid immunogenicity assay offers distinct advantages over current methods in simplicity, low cost, and short time to result. More importantly, the method requires no sample dilution and no washing steps which can perturb fragile complexes formed by low-affinity ADAs. Thus, the assay can potentially detect ADAs with various affinities

  17. The Importance of Three-Body Interactions in Molecular Dynamics Simulations of Water with the Fragment Molecular Orbital Method

    Energy Technology Data Exchange (ETDEWEB)

    Pruitt, Spencer R.; Nakata, Hiroya; Nagata, Takeshi; Mayes, Maricris; Alexeev, Yuri; Fletcher, Graham D.; Fedorov, Dmitri G; Kitaura, Kazuo; Gordon, M

    2016-04-12

    The analytic first derivative with respect to nuclear coordinates is formulated and implemented in the framework of the three-body fragment molecular orbital (FMO) method. The gradient has been derived and implemented for restricted Hartree-Fock, second-order Møller-Plesset perturbation, and density functional theories. The importance of the three-body fully analytic gradient is illustrated through the failure of the two-body FMO method during molecular dynamics simulations of a small water cluster. The parallel implementation of the fragment molecular orbital method, its parallel efficiency, and its scalability on the Blue Gene/Q architecture up to 262,144 CPU cores, are also discussed.

  18. Comparison of Regularization Methods in Fluorescence Molecular Tomography

    Directory of Open Access Journals (Sweden)

    Dianwen Zhu

    2014-04-01

    Full Text Available In vivo fluorescence molecular tomography (FMT has been a popular functional imaging modality in research labs in the past two decades. One of the major difficulties of FMT lies in the ill-posed and ill-conditioned nature of the inverse problem in reconstructing the distribution of fluorophores inside objects. The popular regularization methods based on L2, L1 and total variation (TV norms have been applied in FMT reconstructions. The non-convex Lq(0 < q < 1 semi-norm and Log function have also been studied recently. In this paper, we adopt a uniform optimization transfer framework for these regularization methods in FMT and compare their individual, as well as the combined effects on both small, localized targets, such as tumors in the early stage, and large targets, such as liver. Numerical simulation studies and phantom experiments have been carried out, and we found that Lq with q near 1/2 performs the best in reconstructing small targets, while joint L2 and Log performs the best for large targets.

  19. Leishmania OligoC-TesT as a simple, rapid, and standardized tool for molecular diagnosis of cutaneous leishmaniasis in Peru.

    Science.gov (United States)

    Espinosa, Diego; Boggild, Andrea K; Deborggraeve, Stijn; Laurent, Thierry; Valencia, Cristian; Pacheco, Rosa; Miranda-Verástegui, César; Llanos-Cuentas, Alejandro; Leclipteux, Thierry; Dujardin, Jean-Claude; Büscher, Philippe; Arévalo, Jorge

    2009-08-01

    Molecular methods such as PCR have become attractive tools for diagnosis of cutaneous leishmaniasis (CL), both for their high sensitivity and for their specificity. However, their practical use in routine diagnosis is limited due to the infrastructural requirements and the lack of any standardization. Recently, a simplified and standardized PCR format for molecular detection of Leishmania was developed. The Leishmania OligoC-TesT is based on simple and rapid detection using a dipstick with PCR-amplified Leishmania DNA. In this study, we estimated the diagnostic accuracy of the Leishmania OligoC-TesT for 61 specimens from 44 CL-suspected patients presenting at the leishmaniasis clinic of the Instituto de Medicina Tropical Alexander von Humboldt, Peru. On the basis of parasitological detection and the leishmanin skin test (LST), patients were classified as (i) confirmed CL cases, (ii) LST-positive cases, and (iii) LST-negative cases. The sensitivities of the Leishmania OligoC-TesT was 74% (95% confidence interval (CI), 60.5% to 84.1%) for lesion aspirates and 92% (95% CI, 81.2% to 96.9%) for scrapings. A significantly higher sensitivity was observed with a conventional PCR targeting the kinetoplast DNA on the aspirates (94%) (P = 0.001), while there was no significant difference in sensitivity for the lesion scrapings (88%) (P = 0.317). In addition, the Leishmania OligoC-TesT was evaluated for 13 CL-suspected patients in two different peripheral health centers in the central jungle of Peru. Our findings clearly indicate the high accuracy of the Leishmania OligoC-TesT for lesion scrapings for simple and rapid molecular diagnosis of CL in Peru.

  20. A Rapid and Economical Method for Efficient DNA Extraction from Diverse Soils Suitable for Metagenomic Applications

    Science.gov (United States)

    Devi, Selvaraju Gayathri; Fathima, Anwar Aliya; Radha, Sudhakar; Arunraj, Rex; Curtis, Wayne R.; Ramya, Mohandass

    2015-01-01

    A rapid, cost effective method of metagenomic DNA extraction from soil is a useful tool for environmental microbiology. The present work describes an improved method of DNA extraction namely “powdered glass method” from diverse soils. The method involves the use of sterile glass powder for cell lysis followed by addition of 1% powdered activated charcoal (PAC) as purifying agent to remove humic substances. The method yielded substantial DNA (5.87 ± 0.04 μg/g of soil) with high purity (A260/280: 1.76 ± 0.05) and reduced humic substances (A340: 0.047 ± 0.03). The quality of the extracted DNA was compared against five different methods based on 16S rDNA PCR amplification, BamHI digestion and validated using quantitative PCR. The digested DNA was used for a metagenomic library construction with the transformation efficiency of 4 X 106 CFU mL-1. Besides providing rapid, efficient and economical extraction of metgenomic DNA from diverse soils, this method’s applicability is also demonstrated for cultivated organisms (Gram positive B. subtilis NRRL-B-201, Gram negative E. coli MTCC40, and a microalgae C. sorokiniana UTEX#1666). PMID:26167854

  1. Teaching molecular genetics: Chapter 1--Background principles and methods of molecular biology.

    Science.gov (United States)

    Knoers, Nine V A M; Monnens, Leo A H

    2006-02-01

    In this first chapter of the series "Teaching molecular genetics," an introduction to molecular genetics is presented. We describe the structure of DNA and genes and explain in detail the central dogma of molecular biology, that is, the flow of genetic information from DNA via RNA to polypeptide (protein). In addition, several basic and frequently used general molecular tools, such as restriction enzymes, Southern blotting, DNA amplification and sequencing are discussed, in order to lay the foundations for the forthcoming chapters.

  2. New modelling method for fast reactor neutronic behaviours analysis; Nouvelles methodes de modelisation neutronique des reacteurs rapides de quatrieme Generation

    Energy Technology Data Exchange (ETDEWEB)

    Jacquet, P.

    2011-05-23

    Due to safety rules running on fourth generation reactors' core development, neutronics simulation tools have to be as accurate as never before. First part of this report enumerates every step of fast reactor's neutronics simulation implemented in current reference code: ECCO. Considering the field of fast reactors that meet criteria of fourth generation, ability of models to describe self-shielding phenomenon, to simulate neutrons leakage in a lattice of fuel assemblies and to produce representative macroscopic sections is evaluated. The second part of this thesis is dedicated to the simulation of fast reactors' core with steel reflector. These require the development of advanced methods of condensation and homogenization. Several methods are proposed and compared on a typical case: the ZONA2B core of MASURCA reactor. (author) [French] Les criteres de surete qui regissent le developpement de coeurs de reacteurs de quatrieme generation implique l'usage d'outils de calcul neutronique performants. Une premiere partie de la these reprend toutes les etapes de modelisation neutronique des reacteurs rapides actuellement d'usage dans le code de reference ECCO. La capacite des modeles a decrire le phenomene d'autoprotection, a representer les fuites neutroniques au niveau d'un reseau d'assemblages combustibles et a generer des sections macroscopiques representatives est appreciee sur le domaine des reacteurs rapides innovants respectant les criteres de quatrieme generation. La deuxieme partie de ce memoire se consacre a la modelisation des coeurs rapides avec reflecteur acier. Ces derniers necessitent le developpement de methodes avancees de condensation et d'homogenisation. Plusieurs methodes sont proposees et confrontees sur un probleme de modelisation typique: le coeur ZONA2B du reacteur maquette MASURCA

  3. A rapid Salmonella detection method involving thermophilic helicase-dependent amplification and a lateral flow assay.

    Science.gov (United States)

    Du, Xin-Jun; Zhou, Tian-Jiao; Li, Ping; Wang, Shuo

    2017-08-01

    Salmonella is a major foodborne pathogen that is widespread in the environment and can cause serious human and animal disease. Since conventional culture methods to detect Salmonella are time-consuming and laborious, rapid and accurate techniques to detect this pathogen are critically important for food safety and diagnosing foodborne illness. In this study, we developed a rapid, simple and portable Salmonella detection strategy that combines thermophilic helicase-dependent amplification (tHDA) with a lateral flow assay to provide a detection result based on visual signals within 90 min. Performance analyses indicated that the method had detection limits for DNA and pure cultured bacteria of 73.4-80.7 fg and 35-40 CFU, respectively. Specificity analyses showed no cross reactions with Escherichia coli, Staphylococcus aureus, Listeria monocytogenes, Enterobacter aerogenes, Shigella and Campylobacter jejuni. The results for detection in real food samples showed that 1.3-1.9 CFU/g or 1.3-1.9 CFU/mL of Salmonella in contaminated chicken products and infant nutritional cereal could be detected after 2 h of enrichment. The same amount of Salmonella in contaminated milk could be detected after 4 h of enrichment. This tHDA-strip can be used for the rapid detection of Salmonella in food samples and is particularly suitable for use in areas with limited equipment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Rapid methods to detect organic mercury and total selenium in biological samples

    Directory of Open Access Journals (Sweden)

    Basu Niladri

    2011-01-01

    Full Text Available Abstract Background Organic mercury (Hg is a global pollutant of concern and selenium is believed to afford protection against mercury risk though few approaches exist to rapidly assess both chemicals in biological samples. Here, micro-scale and rapid methods to detect organic mercury ( Results For organic Hg, samples are digested using Tris-HCl buffer (with sequential additions of protease, NaOH, cysteine, CuSO4, acidic NaBr followed by extraction with toluene and Na2S2O3. The final product is analyzed via commercially available direct/total mercury analyzers. For Se, a fluorometric assay has been developed for microplate readers that involves digestion (HNO3-HClO4 and HCl, conjugation (2,3-diaminonaphthalene, and cyclohexane extraction. Recovery of organic Hg (86-107% and Se (85-121% were determined through use of Standard Reference Materials and lemon shark kidney tissues. Conclusions The approaches outlined provide an easy, rapid, reproducible, and cost-effective platform for monitoring organic Hg and total Se in biological samples. Owing to the importance of organic Hg and Se in the pathophysiology of Hg, integration of such methods into established research monitoring efforts (that largely focus on screening total Hg only will help increase understanding of Hg's true risks.

  5. Teaching molecular genetics: Chapter 1--Background principles and methods of molecular biology.

    NARCIS (Netherlands)

    Knoers, N.V.A.M.; Monnens, L.A.H.

    2006-01-01

    In this first chapter of the series "Teaching molecular genetics," an introduction to molecular genetics is presented. We describe the structure of DNA and genes and explain in detail the central dogma of molecular biology, that is, the flow of genetic information from DNA via RNA to polypeptide

  6. Application of rapid cloud point extraction method for trace cobalt analysis coupled with spectrophotometric determination

    Science.gov (United States)

    Wen, Xiaodong; He, Lei; Shi, Chunsheng; Deng, Qingwen; Wang, Jiwei; Zhao, Xia

    2013-11-01

    In this work, the analytical performance of conventional spectrophotometer was improved through the coupling of effective preconcentration method with spectrophotometric determination. Rapidly synergistic cloud point extraction (RS-CPE) was used to pre-concentrate ultra trace cobalt and firstly coupled with spectrophotometric determination. The developed coupling was simple, rapid and efficient. The factors influencing RS-CPE and spectrophotometer were optimized. Under the optimal conditions, the limit of detection (LOD) was 0.6 μg L-1, with sensitivity enhancement factor of 23. The relative standard deviation (RSD) for seven replicate measurements of 50 μg L-1 of cobalt was 4.3%. The recoveries for the spiked samples were in the acceptable range of 93.8-105%.

  7. A rapid and direct real time PCR-based method for identification of Salmonella spp

    DEFF Research Database (Denmark)

    Rodriguez-Lazaro, D.; Hernández, Marta; Esteve, T.

    2003-01-01

    The aim of this work was the validation of a rapid, real-time PCR assay based on TaqMan((R)) technology for the unequivocal identification of Salmonella spp. to be used directly on an agar-grown colony. A real-time PCR system targeting at the Salmonella spp. invA gene was optimized and validated...... to be especially convenient because the pre-mix containing all PCR reagents except for the bacterial cells could be kept at -20 degreesC for at least I month before its use. The optimized TaqMan((R)) real-time PCR assay is a useful, simple and rapid method for routine identification of Salmonella spp...

  8. A rapid method for counting nucleated erythrocytes on stained blood smears by digital image analysis

    Science.gov (United States)

    Gering, E.; Atkinson, C.T.

    2004-01-01

    Measures of parasitemia by intraerythrocytic hematozoan parasites are normally expressed as the number of infected erythrocytes per n erythrocytes and are notoriously tedious and time consuming to measure. We describe a protocol for generating rapid counts of nucleated erythrocytes from digital micrographs of thin blood smears that can be used to estimate intensity of hematozoan infections in nonmammalian vertebrate hosts. This method takes advantage of the bold contrast and relatively uniform size and morphology of erythrocyte nuclei on Giemsa-stained blood smears and uses ImageJ, a java-based image analysis program developed at the U.S. National Institutes of Health and available on the internet, to recognize and count these nuclei. This technique makes feasible rapid and accurate counts of total erythrocytes in large numbers of microscope fields, which can be used in the calculation of peripheral parasitemias in low-intensity infections.

  9. [Three-Iindex-Value Method for Rapid Screening Unqualified Vegetable Oil].

    Science.gov (United States)

    He, Wen-xuan; Hong, Gui-shui; Fang, Run; Cai, Xian-chun; Huang, Sheng

    2015-04-01

    In the present study, by measuring the A3 005 (representing unsaturation), A985 (representing conjugated fatty acids), A960 + A985 (representing trans-fatty acid ) of southern common vegetable oils (peanut oil, corn oil, canola oil, soybean oil, sunflower oil, tea seed oil and olive oil), "waste oil" and overdue vegetable oils, the pass-setting-range of these three index values for the vegetable oils was obtained. On this basis, a method for rapid screening unqualified vegetable oil (expired, adding low-cost oil, adding "waste oil") was established. The method effectively improved the monitoring efficiency of vegetable oil. With this method of screening a number of suspected substandard oils were proved unqualified by determination of fatty acid composition and 11, 12, 13, 17 fatty acid content. Through the combination of several detection methods, the causes for disqualification of vegetable oils can be further inferred.

  10. Rapid and sensitive liquid chromatography-mass spectrometry method for determination of ropinirole in human plasma.

    Science.gov (United States)

    Bhatt, Jignesh; Jangid, Arvind; Shetty, Raghavendra; Shah, Bhavin; Kambli, Sandeep; Subbaiah, Gunta; Singh, Sadhana

    2006-03-18

    A rapid and robust liquid chromatography-mass spectrometry (LC-MS/MS) method was developed for non-ergoline dopamine D(2)-receptor agonist, ropinirole in human plasma using Es-citalopram oxalate as an internal standard. The method involves solid phase extraction from plasma, reversed-phase simple isocratic chromatographic conditions and mass spectrometric detection that enables a detection limit at picogram levels. The proposed method was validated with linear range of 20-1,200 pg/ml. The extraction recoveries for ropinirole and internal standard were 90.45 and 65.42%, respectively. The R.S.D.% of intra-day and inter-day assay was lower than 15%. For its sensitivity and reliability, the proposed method is particularly suitable for pharmacokinetic studies.

  11. New molecular methods for the detection of hepatitis A and Norwalk viruses in shellfish.

    Science.gov (United States)

    Romalde, J L

    1996-12-01

    Outbreaks of viral enteric diseases after consumption of shellfish are a major health risk. Methodological problems (such as toxicity for cell cultures and low viral concentrations) and the unculturability of some strains (i.e. hepatitis A virus, Norwalk virus) have made it difficult to study those viruses in the environmental samples. Currently, the analysis of the hygienic quality of marketable shellfish is determined by the use of fecal indicator bacteria, but their reliability in determining viral pollution of shellfish is very low. Recent biotechnology developments are providing available rapid, sensitive, and specific tools for detecting food-borne viruses in shellfish and in shellfish-growing waters. In this paper, a review of these new molecular methods is carried out, discussing their advantages and possible applications.

  12. Molecular investigation of genetic assimilation during the rapid adaptive radiations of East African cichlid fishes.

    Science.gov (United States)

    Gunter, Helen M; Schneider, Ralf F; Karner, Immanuel; Sturmbauer, Christian; Meyer, Axel

    2017-12-01

    Adaptive radiations are characterized by adaptive diversification intertwined with rapid speciation within a lineage resulting in many ecologically specialized, phenotypically diverse species. It has been proposed that adaptive radiations can originate from ancestral lineages with pronounced phenotypic plasticity in adaptive traits, facilitating ecologically driven phenotypic diversification that is ultimately fixed through genetic assimilation of gene regulatory regions. This study aimed to investigate how phenotypic plasticity is reflected in gene expression patterns in the trophic apparatus of several lineages of East African cichlid fishes, and whether the observed patterns support genetic assimilation. This investigation used a split brood experimental design to compare adaptive plasticity in species from within and outside of adaptive radiations. The plastic response was induced in the crushing pharyngeal jaws through feeding individuals either a hard or soft diet. We find that nonradiating, basal lineages show higher levels of adaptive morphological plasticity than the derived, radiated lineages, suggesting that these differences have become partially genetically fixed during the formation of the adaptive radiations. Two candidate genes that may have undergone genetic assimilation, gif and alas1, were identified, in addition to alterations in the wiring of LPJ patterning networks. Taken together, our results suggest that genetic assimilation may have dampened the inducibility of plasticity related genes during the adaptive radiations of East African cichlids, flattening the reaction norms and canalizing their feeding phenotypes, driving adaptation to progressively more narrow ecological niches. © 2017 John Wiley & Sons Ltd.

  13. Whole-exome sequencing enables rapid determination of xeroderma pigmentosum molecular etiology.

    Directory of Open Access Journals (Sweden)

    Oscar Ortega-Recalde

    Full Text Available Xeroderma pigmentosum (XP is a rare autosomal recessive disorder characterized by extreme sensitivity to actinic pigmentation changes in the skin and increased incidence of skin cancer. In some cases, patients are affected by neurological alterations. XP is caused by mutations in 8 distinct genes (XPA through XPG and XPV. The XP-V (variant subtype of the disease results from mutations in a gene (XPV, also named POLH which encodes for Polη, a member of the Y-DNA polymerase family. Although the presence and severity of skin and neurological dysfunctions differ between XP subtypes, there are overlapping clinical features among subtypes such that the sub-type cannot be deduced from the clinical features. In this study, in order to overcome this drawback, we undertook whole-exome sequencing in two XP sibs and their father. We identified a novel homozygous nonsense mutation (c.897T>G, p.Y299X in POLH which causes the disease. Our results demonstrate that next generation sequencing is a powerful approach to rapid determination of XP genetic etiology.

  14. Simple and rapid methods for detecting Salmonella enteritidis in raw eggs.

    Science.gov (United States)

    Seo, Kun-Ho; Holt, Peter S; Stone, Henry D; Gast, Richard K

    2003-10-15

    The Centers for Disease Control and Prevention estimates there were 300,000 cases of Salmonella enteritidis (SE) in 1997. Egg products were associated with many of the cases. To address this problem, many producers implemented flock surveillance of the SE situation at their facilities. A rapid and simple method for detecting SE from poultry samples is critical for the effective implementation of such testing strategies. A lateral flow device for the detection of SE utilized in this study was manufactured by Neogen, Lansing, MI. The test panel is a presumptive qualitative test system that detects only members of Group D1 Salmonella species. A series of studies were conducted to optimize the test procedure for raw eggs with different sample preparations. A novel antigen extraction method was developed for use with the test panel kit. The detection limit of the test panel kit was increased approximately tenfold when the extraction method was used. Detection of SE was 100% in raw egg pools inoculated with 10 SE cells per ml of egg and incubated at a 1:10 ratio in buffered peptone water (BPW) or tetrathionate brilliant green broth (TBG) for 24 h at 37 degrees C. The developed lateral flow test kit could provide a simple, rapid, and inexpensive method for egg producers and processors to test specifically for Salmonella group D1 serovars, such as SE, in egg samples.

  15. Note: Non-invasive optical method for rapid determination of alignment degree of oriented nanofibrous layers

    Energy Technology Data Exchange (ETDEWEB)

    Pokorny, M.; Rebicek, J. [R& D Department, Contipro Biotech s.r.o., 561 02 Dolni Dobrouc (Czech Republic); Klemes, J. [R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic); Kotzianova, A. [R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic); Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, CZ-62500 Brno (Czech Republic); Velebny, V. [R& D Department, Contipro Biotech s.r.o., 561 02 Dolni Dobrouc (Czech Republic); R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic)

    2015-10-15

    This paper presents a rapid non-destructive method that provides information on the anisotropic internal structure of nanofibrous layers. A laser beam of a wavelength of 632.8 nm is directed at and passes through a nanofibrous layer prepared by electrostatic spinning. Information about the structural arrangement of nanofibers in the layer is directly visible in the form of a diffraction image formed on a projection screen or obtained from measured intensities of the laser beam passing through the sample which are determined by the dependency of the angle of the main direction of polarization of the laser beam on the axis of alignment of nanofibers in the sample. Both optical methods were verified on Polyvinyl alcohol (PVA) nanofibrous layers (fiber diameter of 470 nm) with random, single-axis aligned and crossed structures. The obtained results match the results of commonly used methods which apply the analysis of electron microscope images. The presented simple method not only allows samples to be analysed much more rapidly and without damaging them but it also makes possible the analysis of much larger areas, up to several square millimetres, at the same time.

  16. Use of refractometry and colorimetry as field methods to rapidly assess antimalarial drug quality.

    Science.gov (United States)

    Green, Michael D; Nettey, Henry; Villalva Rojas, Ofelia; Pamanivong, Chansapha; Khounsaknalath, Lamphet; Grande Ortiz, Miguel; Newton, Paul N; Fernández, Facundo M; Vongsack, Latsamy; Manolin, Ot

    2007-01-04

    The proliferation of counterfeit and poor-quality drugs is a major public health problem; especially in developing countries lacking adequate resources to effectively monitor their prevalence. Simple and affordable field methods provide a practical means of rapidly monitoring drug quality in circumstances where more advanced techniques are not available. Therefore, we have evaluated refractometry, colorimetry and a technique combining both processes as simple and accurate field assays to rapidly test the quality of the commonly available antimalarial drugs; artesunate, chloroquine, quinine, and sulfadoxine. Method bias, sensitivity, specificity and accuracy relative to high-performance liquid chromatographic (HPLC) analysis of drugs collected in the Lao PDR were assessed for each technique. The HPLC method for each drug was evaluated in terms of assay variability and accuracy. The accuracy of the combined method ranged from 0.96 to 1.00 for artesunate tablets, chloroquine injectables, quinine capsules, and sulfadoxine tablets while the accuracy was 0.78 for enterically coated chloroquine tablets. These techniques provide a generally accurate, yet simple and affordable means to assess drug quality in resource-poor settings.

  17. A two-step method for rapid characterization of electroosmotic flows in capillary electrophoresis.

    Science.gov (United States)

    Zhang, Wenjing; He, Muyi; Yuan, Tao; Xu, Wei

    2017-12-01

    The measurement of electroosmotic flow (EOF) is important in a capillary electrophoresis (CE) experiment in terms of performance optimization and stability improvement. Although several methods exist, there are demanding needs to accurately characterize ultra-low electroosmotic flow rates (EOF rates), such as in coated capillaries used in protein separations. In this work, a new method, called the two-step method, was developed to accurately and rapidly measure EOF rates in a capillary, especially for measuring the ultra-low EOF rates in coated capillaries. In this two-step method, the EOF rates were calculated by measuring the migration time difference of a neutral marker in two consecutive experiments, in which a pressure driven was introduced to accelerate the migration and the DC voltage was reversed to switch the EOF direction. Uncoated capillaries were first characterized by both this two-step method and a conventional method to confirm the validity of this new method. Then this new method was applied in the study of coated capillaries. Results show that this new method is not only fast in speed, but also better in accuracy. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Rapid Targeted Next-Generation Sequencing Platform for Molecular Screening and Clinical Genotyping in Subjects with Hemoglobinopathies

    Directory of Open Access Journals (Sweden)

    Xuan Shang

    2017-09-01

    Full Text Available Hemoglobinopathies are among the most common autosomal-recessive disorders worldwide. A comprehensive next-generation sequencing (NGS test would greatly facilitate screening and diagnosis of these disorders. An NGS panel targeting the coding regions of hemoglobin genes and four modifier genes was designed. We validated the assay by using 2522 subjects affected with hemoglobinopathies and applied it to carrier testing in a cohort of 10,111 couples who were also screened through traditional methods. In the clinical genotyping analysis of 1182 β-thalassemia subjects, we identified a group of additional variants that can be used for accurate diagnosis. In the molecular screening analysis of the 10,111 couples, we detected 4180 individuals in total who carried 4840 mutant alleles, and identified 186 couples at risk of having affected offspring. 12.1% of the pathogenic or likely pathogenic variants identified by our NGS assay, which were undetectable by traditional methods. Compared with the traditional methods, our assay identified an additional at-risk 35 couples. We describe a comprehensive NGS-based test that offers advantages over the traditional screening/molecular testing methods. To our knowledge, this is among the first large-scale population study to systematically evaluate the application of an NGS technique in carrier screening and molecular diagnosis of hemoglobinopathies.

  19. Non-supervised method for early forest fire detection and rapid mapping

    Science.gov (United States)

    Artés, Tomás; Boca, Roberto; Liberta, Giorgio; San-Miguel, Jesús

    2017-09-01

    Natural hazards are a challenge for the society. Scientific community efforts have been severely increased assessing tasks about prevention and damage mitigation. The most important points to minimize natural hazard damages are monitoring and prevention. This work focuses particularly on forest fires. This phenomenon depends on small-scale factors and fire behavior is strongly related to the local weather. Forest fire spread forecast is a complex task because of the scale of the phenomena, the input data uncertainty and time constraints in forest fire monitoring. Forest fire simulators have been improved, including some calibration techniques avoiding data uncertainty and taking into account complex factors as the atmosphere. Such techniques increase dramatically the computational cost in a context where the available time to provide a forecast is a hard constraint. Furthermore, an early mapping of the fire becomes crucial to assess it. In this work, a non-supervised method for forest fire early detection and mapping is proposed. As main sources, the method uses daily thermal anomalies from MODIS and VIIRS combined with land cover map to identify and monitor forest fires with very few resources. This method relies on a clustering technique (DBSCAN algorithm) and on filtering thermal anomalies to detect the forest fires. In addition, a concave hull (alpha shape algorithm) is applied to obtain rapid mapping of the fire area (very coarse accuracy mapping). Therefore, the method leads to a potential use for high-resolution forest fire rapid mapping based on satellite imagery using the extent of each early fire detection. It shows the way to an automatic rapid mapping of the fire at high resolution processing as few data as possible.

  20. Differentiation of mycoplasma gallisepticum strains using molecular methods.

    Science.gov (United States)

    Biró, Judit; Erdei, Noémi; Székely, Ibolya; Stipkovits, L

    2006-12-01

    Increasing use of Mycoplasma gallisepticum (MG) live vaccines has led to a need for the differentiation of MG strains. The MG strains MK-7, MS-16, S6, FS-9 and R strains and the MG live vaccine strain F were compared by random amplification of polymorphic DNA (RAPD) in this study. Using RAPD, different patterns were found among the MG strains. In addition to this, we examined the differentiating potential of polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) primers targeted at the crmA, crmB, crmC, gapA, mgc2 and pvpA genes encoding cytadherence-related surface proteins. These proteins may take part in the pathogenesis of MG-induced disease. Differentiation of strain F is based on the identification of restriction enzyme sites in the PCR amplicons. Using HphI enzyme, crmC PCR amplicons produced different RFLP patterns. Digestion of amplicons of gapA-specific PCR with MboI enzyme also produced distinct patterns. Differences were observed among strains R and F by digestion of mgc2 PCR amplicons with HaelIl and VspI enzymes and digestion of pvpA PCR amplicons with AccI, PvulI and ScrFI endonucleases. This method can be used for the rapid differentiation of vaccine strain from wild strains. Differentiation of MG strains is a great advantage for diagnosticians or practitioners and it is useful for epidemiological studies.

  1. [Molecular diagnostic methods of respiratory infections. Has the scheme diagnosis changed?].

    Science.gov (United States)

    Vila Estapé, Jordi; Zboromyrska, Yuliya; Vergara Gómez, Andrea; Alejo Cancho, Izaskun; Rubio García, Elisa; Álvarez-Martínez, Miriam José; la Bellacasa Brugada, Jorge Puig de; Marcos Maeso, M Ángeles

    2016-07-01

    Lower respiratory tract infections remain one of the most common causes of mortality worldwide, which is why early diagnosis is crucial. Traditionally the microbiological diagnosis of these infections has been based on conventional methods including culture on artificial media for isolation of bacteria and fungi and cell cultures for virus and antibody or antigen detection using antigen-antibody reactions. The main drawback of the above mentioned methods is the time needed for an etiological diagnosis of the infection. The techniques based on molecular biology have drawn much attention in recent decades as tools for rapid diagnosis of infections. Some techniques are very expensive, especially those that can detect various microorganisms in the same reaction, therefore the question that arises is whether the cost of such testing is justified by the information obtained and by the clinical impact that its implementation will determine. In this article we make a review of the various techniques of molecular biology applied to the diagnosis of pneumonia and focus primarily on analysing the impact they may have on the management of patients with acute respiratory tract infections. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  2. Interaction between Rivers and Aquifers: a method for rapid Identification of Transience in Streambed Conductance

    Science.gov (United States)

    Gianni, Guillaume; Perrochet, Pierre; Vogel, Alexandre; Brunner, Philip

    2016-04-01

    Streambed hydraulic conductance controls the interactions between surface water and groundwater. In order to quantify river-aquifer dynamics, quantifying conductance is indispensable. However, the streambed conductance is often subject to transience, as a result of the erosion and deposition processes in rivers. This transience has to be quantified and considered for any approach (i.e. numerical or analytical models) aimed at quantifying exchange fluxes. Directly measuring hydraulic properties in a river yields only point values, is time-consuming and therefore not suited to detect transience of the physical properties. We present a method to continuously and rapidly monitor transience of streambed conductance. Input data are time series of stream stage and hydraulic head variations in the aquifer. The method is based on the inversion of a floodwave response. The analytical model consists of only 3 parameters: x, the distance between streambank and an observation well, α, the aquifer diffusivity and a, the retardation coefficient that is inversely proportional to the streambed conductance. Estimation of a is carried out over successive time steps in order to identify transience in streambed conductance. The method is tested on synthetic data and is applied to field data from the Rhône River and its alluvial aquifer (Switzerland). The synthetic method demonstrated the robustness of the proposed methodology. Application of the method to the field site allowed identifying transience in streambed properties, following flood events in the Rhône. This method requires transience in the surface water, and the river should not change its width significantly with a rising water level. If these conditions are fulfilled, this method allows for a rapid and effective identification of transience of streambed conductance.

  3. A molecular method for the delivery of small molecules and proteins across the cell wall of algae using molecular transporters

    OpenAIRE

    Hyman, Joel M.; Geihe, Erika I.; Trantow, Brian M.; Parvin, Bahram; Wender, Paul A.

    2012-01-01

    Interest in algae has significantly accelerated with the increasing recognition of their potentially unique role in medical, materials, energy, bioremediation, and synthetic biological research. However, the introduction of tools to study, control, or expand the inner-workings of algae has lagged behind. Here we describe a general molecular method based on guanidinium-rich molecular transporters (GR-MoTrs) for bringing small and large cargos into algal cells. Significantly, this method is sho...

  4. Accessible surfaces of beta proteins increase with increasing protein molecular mass more rapidly than those of other proteins.

    Directory of Open Access Journals (Sweden)

    Anna V Glyakina

    Full Text Available Here we present a systematic analysis of accessible surface areas and hydrogen bonds of 2554 globular proteins from four structural classes (all-α, all-β, α/β and α+β proteins that is aimed to learn in which structural class the accessible surface area increases with increasing protein molecular mass more rapidly than in other classes, and what structural peculiarities are responsible for this effect. The beta structural class of proteins was found to be the leader, with the following possible explanations of this fact. First, in beta structural proteins, the fraction of residues not included in the regular secondary structure is the largest, and second, the accessible surface area of packaged elements of the beta-structure increases more rapidly with increasing molecular mass in comparison with the alpha-structure. Moreover, in the beta structure, the probability of formation of backbone hydrogen bonds is higher than that in the alpha helix for all residues of α+β proteins (the average probability is 0.73±0.01 for the beta-structure and 0.60±0.01 for the alpha-structure without proline and α/β proteins, except for asparagine, aspartic acid, glycine, threonine, and serine (0.70±0.01 for the beta-structure and 0.60±0.01 for the alpha-structure without the proline residue. There is a linear relationship between the number of hydrogen bonds and the number of amino acid residues in the protein (Number of hydrogen bonds=0.678·number of residues-3.350.

  5. The BUME method: a new rapid and simple chloroform-free method for total lipid extraction of animal tissue

    Science.gov (United States)

    Löfgren, Lars; Forsberg, Gun-Britt; Ståhlman, Marcus

    2016-06-01

    In this study we present a simple and rapid method for tissue lipid extraction. Snap-frozen tissue (15-150 mg) is collected in 2 ml homogenization tubes. 500 μl BUME mixture (butanol:methanol [3:1]) is added and automated homogenization of up to 24 frozen samples at a time in less than 60 seconds is performed, followed by a 5-minute single-phase extraction. After the addition of 500 μl heptane:ethyl acetate (3:1) and 500 μl 1% acetic acid a 5-minute two-phase extraction is performed. Lipids are recovered from the upper phase by automated liquid handling using a standard 96-tip robot. A second two-phase extraction is performed using 500 μl heptane:ethyl acetate (3:1). Validation of the method showed that the extraction recoveries for the investigated lipids, which included sterols, glycerolipids, glycerophospholipids and sphingolipids were similar or better than for the Folch method. We also applied the method for lipid extraction of liver and heart and compared the lipid species profiles with profiles generated after Folch and MTBE extraction. We conclude that the BUME method is superior to the Folch method in terms of simplicity, through-put, automation, solvent consumption, economy, health and environment yet delivering lipid recoveries fully comparable to or better than the Folch method.

  6. Rapid Staining Method to Detect and Identify Downy Mildew (Peronospora belbahrii in Basil

    Directory of Open Access Journals (Sweden)

    Adolfina R. Koroch

    2013-07-01

    Full Text Available Premise of the study: Demand for fresh-market sweet basil continues to increase, but in 2009 a new pathogen emerged, threatening commercial field/greenhouse production and leading to high crop losses. This study describes a simple and effective staining method for rapid microscopic detection of basil downy mildew (Peronospora belbahrii from leaves of basil (Ocimum basilicum. Methods and Results: Fresh leaf sections infected with P. belbahrii were placed on a microscope slide, cleared with Visikol™, and stained with iodine solution followed by one drop of 70% sulfuric acid. Cell walls of the pathogen were stained with a distinct coloration, providing a high-contrast image between the pathogen and plant. Conclusions: This new staining method can be used successfully to identify downy mildew in basil, which then can significantly reduce its spread if identified early, coupled with mitigation strategies. This technique can facilitate the control of the disease, without expensive and specialized equipment.

  7. The method of parallel-hierarchical transformation for rapid recognition of dynamic images using GPGPU technology

    Science.gov (United States)

    Timchenko, Leonid; Yarovyi, Andrii; Kokriatskaya, Nataliya; Nakonechna, Svitlana; Abramenko, Ludmila; Ławicki, Tomasz; Popiel, Piotr; Yesmakhanova, Laura

    2016-09-01

    The paper presents a method of parallel-hierarchical transformations for rapid recognition of dynamic images using GPU technology. Direct parallel-hierarchical transformations based on cluster CPU-and GPU-oriented hardware platform. Mathematic models of training of the parallel hierarchical (PH) network for the transformation are developed, as well as a training method of the PH network for recognition of dynamic images. This research is most topical for problems on organizing high-performance computations of super large arrays of information designed to implement multi-stage sensing and processing as well as compaction and recognition of data in the informational structures and computer devices. This method has such advantages as high performance through the use of recent advances in parallelization, possibility to work with images of ultra dimension, ease of scaling in case of changing the number of nodes in the cluster, auto scan of local network to detect compute nodes.

  8. Large Rapidity Gap Method to Select Soft Diffraction Dissociation at the LHC

    Directory of Open Access Journals (Sweden)

    Emily Nurse

    2016-01-01

    Full Text Available In proton-proton (pp collisions, any process involves exchanging the vacuum quantum numbers is known as diffractive process. A diffractive process with no large Q2 is called soft diffractive process. The diffractive processes are important for understanding nonperturbative QCD effects and they also constitute a significant fraction of the total pp cross section. The diffractive events are typically characterized by a region of the detector without particles, known as a rapidity gap. In order to observe diffractive events in this way, we consider the pseudorapidity acceptance in the forward region of the ATLAS and CMS detectors at the Large Hadron Collider (LHC and discuss the methods to select soft diffractive dissociation for pp collisions at s=7 TeV. It is shown that, in the limited detector rapidity acceptance, it is possible to select diffractive dissociation events by requiring a rapidity gap in the event; however, without using forward detectors, it seems not possible to fully separate single and double diffractive dissociation events. The Zero Degree Calorimeters can be used to distinguish the type of the diffractive processes up to a certain extent.

  9. Hierarchically rough, mechanically durable and superhydrophobic epoxy coatings through rapid evaporation spray method

    Energy Technology Data Exchange (ETDEWEB)

    Simovich, Tomer; Wu, Alex H.; Lamb, Robert N., E-mail: rnlamb@unimelb.edu.au

    2015-08-31

    A mechanically durable and scalable superhydrophobic coating was fabricated by combining the advantages of both bottom-up and top-down approaches into a one-pot, one-step application method. This is achieved by spray coating a solution consisting of silica nanoparticles, which are embedded within epoxy resin, onto a heated substrate to rapidly drive both solvent evaporation and curing simultaneously. By maintaining a high substrate temperature, the arrival of spray-delivered micrometer-sized droplets are rapidly cured onto the substrate to form surface microroughness, while simultaneously, rapid solvent evaporation within each droplet results in the formation of a nanoporous structure. SEM, dual-beam FIB, and cross-sectional TEM/EDAX elemental mapping were used to confirm both the chemistry and the requisite micro- and nano-porosity within the coating structure requisite for superhydrophobicity. The resultant coatings exhibit contact angles greater than 150° (153.8° ± 0.8°) and roll-off angles of 8° ± 2°, with a coating hardness of 6H on the pencil hardness scale, and a rating of 5 on an ASTM crosshatch test. - Highlights: • A highly superhydrophobic coating was fabricated utilizing epoxy and nanoparticles. • The coating was demonstrated to be very durable and abrasion resistant. • The fabrication involves a novel, scalable one-pot synthesis technique.

  10. Rapid Method for Ra-226 and Ra-228 in Water Samples

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod, L. III

    2006-02-10

    The measurement of radium isotopes in natural waters is important for oceanographic studies and for public health reasons. Ra-226 (1620 year half-life) is one of the most toxic of the long-lived alpha emitters present in the environment due to its long life and its tendency to concentrate in bones, which increases the internal radiation dose of individuals. The analysis of radium-226 and radium-228 in natural waters can be tedious and time-consuming. Different sample preparation methods are often required to prepare Ra-226 and Ra-228 for separate analyses. A rapid method has been developed at the Savannah River Environmental Laboratory that effectively separates both Ra-226 and Ra-228 (via Ac-228) for assay. This method uses MnO{sub 2} Resin from Eichrom Technologies (Darien, IL, USA) to preconcentrate Ra-226 and Ra-228 rapidly from water samples, along with Ba-133 tracer. DGA Resin{reg_sign} (Eichrom) and Ln-Resin{reg_sign} (Eichrom) are employed in tandem to prepare Ra-226 for assay by alpha spectrometry and to determine Ra-228 via the measurement of Ac-228 by gas proportional counting. After preconcentration, the manganese dioxide is dissolved from the resin and passed through stacked Ln-Resin-DGA Resin cartridges that remove uranium and thorium interferences and retain Ac-228 on DGA Resin. The eluate that passed through this column is evaporated, redissolved in a lower acidity and passed through Ln-Resin again to further remove interferences before performing a barium sulfate microprecipitation. The Ac-228 is stripped from the resin, collected using cerium fluoride microprecipitation and counted by gas proportional counting. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized.

  11. A rapid and sensitive method for measuring N-acetylglucosaminidase activity in cultured cells.

    Directory of Open Access Journals (Sweden)

    Victor Mauri

    Full Text Available A rapid and sensitive method to quantitatively assess N-acetylglucosaminidase (NAG activity in cultured cells is highly desirable for both basic research and clinical studies. NAG activity is deficient in cells from patients with Mucopolysaccharidosis type IIIB (MPS IIIB due to mutations in NAGLU, the gene that encodes NAG. Currently available techniques for measuring NAG activity in patient-derived cell lines include chromogenic and fluorogenic assays and provide a biochemical method for the diagnosis of MPS IIIB. However, standard protocols require large amounts of cells, cell disruption by sonication or freeze-thawing, and normalization to the cellular protein content, resulting in an error-prone procedure that is material- and time-consuming and that produces highly variable results. Here we report a new procedure for measuring NAG activity in cultured cells. This procedure is based on the use of the fluorogenic NAG substrate, 4-Methylumbelliferyl-2-acetamido-2-deoxy-alpha-D-glucopyranoside (MUG, in a one-step cell assay that does not require cell disruption or post-assay normalization and that employs a low number of cells in 96-well plate format. We show that the NAG one-step cell assay greatly discriminates between wild-type and MPS IIIB patient-derived fibroblasts, thus providing a rapid method for the detection of deficiencies in NAG activity. We also show that the assay is sensitive to changes in NAG activity due to increases in NAGLU expression achieved by either overexpressing the transcription factor EB (TFEB, a master regulator of lysosomal function, or by inducing TFEB activation chemically. Because of its small format, rapidity, sensitivity and reproducibility, the NAG one-step cell assay is suitable for multiple procedures, including the high-throughput screening of chemical libraries to identify modulators of NAG expression, folding and activity, and the investigation of candidate molecules and constructs for applications in

  12. Rapid expansion method (REM) for time‐stepping in reverse time migration (RTM)

    KAUST Repository

    Pestana, Reynam C.

    2009-01-01

    We show that the wave equation solution using a conventional finite‐difference scheme, derived commonly by the Taylor series approach, can be derived directly from the rapid expansion method (REM). After some mathematical manipulation we consider an analytical approximation for the Bessel function where we assume that the time step is sufficiently small. From this derivation we find that if we consider only the first two Chebyshev polynomials terms in the rapid expansion method we can obtain the second order time finite‐difference scheme that is frequently used in more conventional finite‐difference implementations. We then show that if we use more terms from the REM we can obtain a more accurate time integration of the wave field. Consequently, we have demonstrated that the REM is more accurate than the usual finite‐difference schemes and it provides a wave equation solution which allows us to march in large time steps without numerical dispersion and is numerically stable. We illustrate the method with post and pre stack migration results.

  13. An evaluation of rapid methods for monitoring vegetation characteristics of wetland bird habitat

    Science.gov (United States)

    Tavernia, Brian G.; Lyons, James E.; Loges, Brian W.; Wilson, Andrew; Collazo, Jaime A.; Runge, Michael C.

    2016-01-01

    Wetland managers benefit from monitoring data of sufficient precision and accuracy to assess wildlife habitat conditions and to evaluate and learn from past management decisions. For large-scale monitoring programs focused on waterbirds (waterfowl, wading birds, secretive marsh birds, and shorebirds), precision and accuracy of habitat measurements must be balanced with fiscal and logistic constraints. We evaluated a set of protocols for rapid, visual estimates of key waterbird habitat characteristics made from the wetland perimeter against estimates from (1) plots sampled within wetlands, and (2) cover maps made from aerial photographs. Estimated percent cover of annuals and perennials using a perimeter-based protocol fell within 10 percent of plot-based estimates, and percent cover estimates for seven vegetation height classes were within 20 % of plot-based estimates. Perimeter-based estimates of total emergent vegetation cover did not differ significantly from cover map estimates. Post-hoc analyses revealed evidence for observer effects in estimates of annual and perennial covers and vegetation height. Median time required to complete perimeter-based methods was less than 7 percent of the time needed for intensive plot-based methods. Our results show that rapid, perimeter-based assessments, which increase sample size and efficiency, provide vegetation estimates comparable to more intensive methods.

  14. wzi Gene Sequencing, a Rapid Method for Determination of Capsular Type for Klebsiella Strains

    Science.gov (United States)

    Passet, Virginie; Haugaard, Anita Björk; Babosan, Anamaria; Kassis-Chikhani, Najiby; Struve, Carsten; Decré, Dominique

    2013-01-01

    Pathogens of the genus Klebsiella have been classified into distinct capsular (K) types for nearly a century. K typing of Klebsiella species still has important applications in epidemiology and clinical microbiology, but the serological method has strong practical limitations. Our objective was to evaluate the sequencing of wzi, a gene conserved in all capsular types of Klebsiella pneumoniae that codes for an outer membrane protein involved in capsule attachment to the cell surface, as a simple and rapid method for the prediction of K type. The sequencing of a 447-nucleotide region of wzi distinguished the K-type reference strains with only nine exceptions. A reference wzi sequence database was created by the inclusion of multiple strains representing K types associated with high virulence and multidrug resistance. A collection of 119 prospective clinical isolates of K. pneumoniae were then analyzed in parallel by wzi sequencing and classical K typing. Whereas K typing achieved typeability for 81% and discrimination for 94.4% of the isolates, these figures were 98.1% and 98.3%, respectively, for wzi sequencing. The prediction of K type once the wzi allele was known was 94%. wzi sequencing is a rapid and simple method for the determination of the K types of most K. pneumoniae clinical isolates. PMID:24088853

  15. A rapid method for measuring soil water content in the field with a areometer

    Directory of Open Access Journals (Sweden)

    Calbo Adonai Gimenez

    2002-01-01

    Full Text Available The availability of a rapid method to evaluate the soil water content (U can be an important tool to determine the moment to irrigate. The soil areometer consists of an elongated hydrostatic balance with a weighing pan, a graduated neck, a float and a pynometric flask. In this work an areometer was adapted to rapidly measure soil water content without the need of drying the soil. The expression U = (M A - M AD/(M M -M A was used to calculate the soil water content. In this equation M M is the mass to level the areometer with the pycnometric flask filled with water, M A the mass to level the areometer with a mass M M of soil in the pycnometer, the volume being completed with water, and similarly M AD the mass added to the pan to level the areometer with a mass M M of dried soil in the pycnometric flask. The convenience of this method is that the values M M and M AD are known. Consequently, the decision on irrigation can be made after a measurement that takes, about, ten minutes. The procedure involves only stirring the soil with water for at least 2 minutes to remove the adhered air. The soil water content data obtained with the areometric method were similar to those obtained weighing the soil before and after drying to constant weight, in an oven at 105º C.

  16. Single-step blood direct PCR: A robust and rapid method to diagnose triplet repeat disorders.

    Science.gov (United States)

    Singh, Inder; Swarup, Vishnu; Shakya, Sunil; Goyal, Vinay; Faruq, Mohammed; Srivastava, Achal Kumar

    2017-08-15

    DNA extraction prior to polymerase chain reaction (PCR) amplification in genetic diagnoses of triplet repeat disorders (TRDs) is tedious and labour-intensive and has the limitations of sample contamination with foreign DNA, including that from preceding samples. Therefore, we aimed to develop a rapid, robust, and cost-effective method for expeditious genetic investigation of TRDs from whole blood as a DNA template. Peripheral blood samples were collected from 70 clinically suspected patients of progressive ataxia. The conventional method using genomic DNA and single-step Blood-Direct PCR (BD-PCR) method with just 2μl of whole blood sample were tested to amplify triplet repeat expansion in genes related to spinocerebellar ataxia (SCA) types 1, 2, 3, 12 and Friedreich's ataxia (FRDA). Post-PCR, the allele sizes were mapped and repeat numbers were calculated using GeneMapper and macros run in Microsoft Excel programmes. Successful amplification of target regions was achieved in all samples by both methods. The frequency of the normal and mutated allele was concordant between both methods, diagnosing 37% positive for a mutation in either of the candidate genes. The BD-PCR resulted in higher intensities of product peaks of normal and pathogenic alleles. The nearly-accurate sizing of the normal and expanded allele was achieved in a shorter time (4-5h), without DNA extraction and any risk of cross contamination, which suggests the BD-PCR to be a reliable, inexpensive, and rapid method to confirm TRDs. This technique can be introduced in routine diagnostic procedures of other tandem repeat disorders. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Apta-nanosensor preparation and in vitro assay for rapid Diazinon detection using a computational molecular approach.

    Science.gov (United States)

    Jokar, Mahmoud; Safaralizadeh, Mohammad Hassan; Hadizadeh, Farzin; Rahmani, Fatemeh; Kalani, Mohamad Reza

    2017-02-01

    Aptamers (ss-DNA or ss-RNA), also known as artificial antibodies, have been selected in vitro median to bind target molecules with high affinity and selectivity. Diazinon is one of the most widely used organophosphorus insecticides in developing and underdeveloped countries as insecticide and acaricide. Diazinon is readily absorbed from the gastrointestinal system and rapidly distributed throughout the body. Thus, the design of clinical and laboratory diagnostics using nanobiosensors is necessary. A computational approach allows us to screen or rank receptor structure and predict interaction outcomes with a deeper understanding, and it is much more cost effective than laboratory attempts. In this research, the best sequence (high affinity bind Diazinon-ssDNA) was ranked among 12 aptamers isolated from SELEX experimentation. Docking results, as the first virtual screening stage and static technique, selected frequent conformation of each aptamer. Then, the quantity and quality of aptamer-Diazinon interaction were simulated using molecular dynamics as a mobility technique. RMSD, RMSF, radius of gyration, and the number of hydrogen bonds formed between Diazinon-aptamer were monitored to assess the quantity and quality of interactions. G-quadruplex DNA aptamer (DF20) showed to be a reliable candidate for Diazinon biosensing. The apta-nanosensor designed using simulation results allowed with linearity detection in the range of .141-.65 nM and a LOD of 17.903 nM, and it was validated using a computational molecular approach.

  18. A Rapid Method for Determining the Concentration of Recombinant Protein Secreted from Pichia pastoris

    Science.gov (United States)

    Sun, L. W.; Zhao, Y.; Niu, L. P.; Jiang, R.; Song, Y.; Feng, H.; feng, K.; Qi, C.

    2011-02-01

    Pichia secretive expression system is one of powerful eukaryotic expression systems in genetic engineering, which is especially suitable for industrial utilization. Because of the low concentration of the target protein in initial experiment, the methods and conditions for expression of the target protein should be optimized according to the protein yield repetitively. It is necessary to set up a rapid, simple and convenient analysis method for protein expression levels instead of the generally used method such as ultrafiltration, purification, dialysis, lyophilization and so on. In this paper, acetone precipitation method was chosen to concentrate the recombinant protein firstly after comparing with four different protein precipitation methods systematically, and then the protein was analyzed by SDS-Polyacrylamide Gel Electrophoresis. The recombinant protein was determined with the feature of protein band by the Automated Image Capture and 1-D Analysis Software directly. With this method, the optimized expression conditions of basic fibroblast growth factor secreted from pichia were obtained, which is as the same as using traditional methods. Hence, a convenient tool to determine the optimized conditions for the expression of recombinant proteins in Pichia was established.

  19. Development of Gel-Filter Method for High Enrichment of Low-Molecular Weight Proteins from Serum

    Science.gov (United States)

    Chen, Lingsheng; Zhai, Linhui; Li, Yanchang; Li, Ning; Zhang, Chengpu; Ping, Lingyan; Chang, Lei; Wu, Junzhu; Li, Xiangping; Shi, Deshun; Xu, Ping

    2015-01-01

    The human serum proteome has been extensively screened for biomarkers. However, the large dynamic range of protein concentrations in serum and the presence of highly abundant and large molecular weight proteins, make identification and detection changes in the amount of low-molecular weight proteins (LMW, molecular weight ≤ 30kDa) difficult. Here, we developed a gel-filter method including four layers of different concentration of tricine SDS-PAGE-based gels to block high-molecular weight proteins and enrich LMW proteins. By utilizing this method, we identified 1,576 proteins (n = 2) from 10 μL serum. Among them, 559 (n = 2) proteins belonged to LMW proteins. Furthermore, this gel-filter method could identify 67.4% and 39.8% more LMW proteins than that in representative methods of glycine SDS-PAGE and optimized-DS, respectively. By utilizing SILAC-AQUA approach with labeled recombinant protein as internal standard, the recovery rate for GST spiked in serum during the treatment of gel-filter, optimized-DS, and ProteoMiner was 33.1 ± 0.01%, 18.7 ± 0.01% and 9.6 ± 0.03%, respectively. These results demonstrate that the gel-filter method offers a rapid, highly reproducible and efficient approach for screening biomarkers from serum through proteomic analyses. PMID:25723528

  20. Development of gel-filter method for high enrichment of low-molecular weight proteins from serum.

    Directory of Open Access Journals (Sweden)

    Lingsheng Chen

    Full Text Available The human serum proteome has been extensively screened for biomarkers. However, the large dynamic range of protein concentrations in serum and the presence of highly abundant and large molecular weight proteins, make identification and detection changes in the amount of low-molecular weight proteins (LMW, molecular weight ≤ 30kDa difficult. Here, we developed a gel-filter method including four layers of different concentration of tricine SDS-PAGE-based gels to block high-molecular weight proteins and enrich LMW proteins. By utilizing this method, we identified 1,576 proteins (n = 2 from 10 μL serum. Among them, 559 (n = 2 proteins belonged to LMW proteins. Furthermore, this gel-filter method could identify 67.4% and 39.8% more LMW proteins than that in representative methods of glycine SDS-PAGE and optimized-DS, respectively. By utilizing SILAC-AQUA approach with labeled recombinant protein as internal standard, the recovery rate for GST spiked in serum during the treatment of gel-filter, optimized-DS, and ProteoMiner was 33.1 ± 0.01%, 18.7 ± 0.01% and 9.6 ± 0.03%, respectively. These results demonstrate that the gel-filter method offers a rapid, highly reproducible and efficient approach for screening biomarkers from serum through proteomic analyses.

  1. Rapid Reticulin Fiber Staining Method is Helpful for the Diagnosis of Pituitary Adenoma in Frozen Section.

    Science.gov (United States)

    Noh, Songmi; Kim, Sun Ho; Cho, Nam Hoon; Kim, Se Hoon

    2015-05-01

    Approximately 90% of neoplasms found in the sellar region are adenoma of the pituitary gland. The use of frozen sections for the diagnosis of pituitary adenomas has an accuracy of 90% and is useful in evaluating complete tumor removal. However, it is sometimes difficult to diagnose pituitary adenomas using frozen sections because of the small sample size and marked artifact, and the contiguity of the pituitary adenoma with normal pituitary gland tissue. In this study, we evaluated the use of our modified reticulin stain to make correct decision in frozen section with reduced stain time and investigated the objective diagnostic criteria of pituitary adenoma with reticulin stain. We used Gomori's silver impregnation methods to stain reticulin fibers in frozen pituitary gland sections of 36 samples from 24 patients. We modified the conventional staining method by reducing the overall staining time. We diagnosed pituitary lesion according to our interpretation criteria and compared the results to those of the conventional method and findings of hematoxylin and eosin-stained slides. Reticulin fiber staining of normal adenohypophysis outlines the supporting stroma around the blood vessels and shows regular of the gland meshwork interconnecting the capillaries. In contrast, reticulin fiber staining of the adenomatous tissue shows loss of meshwork or frequent fragmentation. Our modified reticulin stain is more rapid than the established method and shows similar levels of accuracy. Independent evaluation by two pathologists showed discrepancies in diagnosis in four out of 36 cases with modified reticulin stain. Our rapid modified reticulin staining method for frozen sections may be useful as a diagnostic tool for pituitary adenomas and can complement routine hematoxylin and eosin staining.

  2. Clinical usefulness of multiplex PCR lateral flow in MRSA detection: a novel, rapid genetic testing method.

    Science.gov (United States)

    Nihonyanagi, Shin; Kanoh, Yuhsaku; Okada, Kiyomi; Uozumi, Toshiki; Kazuyama, Yukumasa; Yamaguchi, Tokiko; Nakazaki, Nobuhiko; Sakurai, Keizou; Hirata, Yasuyoshi; Munekata, Shinichi; Ohtani, Shinichi; Takemoto, Tsuyoshi; Bandoh, Yuki; Akahoshi, Tohru

    2012-06-01

    Methicillin-resistant Staphylococcus aureus (MRSA) with exogenous cassette DNA containing the methicillin-resistant gene mecA (SCCmec) poses a problem as a drug-resistant bacterium responsible for hospital- and community-acquired infections. The frequency of MRSA detection has recently been increasing rapidly in Japan, and SCCmec has also been classified more diversely into types I-V. A rapid test is essential for early diagnosis and treatment of MRSA infections, but detection by conventional methods requires at least two days. The newly developed multiplex PCR lateral flow method allows specific amplification of femA to detect S. aureus, mecA to detect SCCmec, and kdpC to detect SCCmec type II; moreover, PCR products can be evaluated visually in about 3 h. In the present study, we developed a PCR lateral flow method for MRSA using this method and investigated its clinical usefulness in the detection of MRSA. The results showed a diagnostic concordance rate of 91.7% for MRSA and methicillin-susceptible S. aureus between bacteriological examination and PCR lateral flow, and a high level of specificity in PCR lateral flow. In addition, a higher detection rate for S. aureus using the same sample was observed for PCR lateral flow (70.2%) than for bacteriological tests (48.6%). The above results show that PCR lateral flow for MRSA detection has high sensitivity, specificity, and speed, and its clinical application as a method for early diagnosis of MRSA infections appears to be feasible.

  3. Optimal estimation and scheduling in aquifer management using the rapid feedback control method

    Science.gov (United States)

    Ghorbanidehno, Hojat; Kokkinaki, Amalia; Kitanidis, Peter K.; Darve, Eric

    2017-12-01

    Management of water resources systems often involves a large number of parameters, as in the case of large, spatially heterogeneous aquifers, and a large number of "noisy" observations, as in the case of pressure observation in wells. Optimizing the operation of such systems requires both searching among many possible solutions and utilizing new information as it becomes available. However, the computational cost of this task increases rapidly with the size of the problem to the extent that textbook optimization methods are practically impossible to apply. In this paper, we present a new computationally efficient technique as a practical alternative for optimally operating large-scale dynamical systems. The proposed method, which we term Rapid Feedback Controller (RFC), provides a practical approach for combined monitoring, parameter estimation, uncertainty quantification, and optimal control for linear and nonlinear systems with a quadratic cost function. For illustration, we consider the case of a weakly nonlinear uncertain dynamical system with a quadratic objective function, specifically a two-dimensional heterogeneous aquifer management problem. To validate our method, we compare our results with the linear quadratic Gaussian (LQG) method, which is the basic approach for feedback control. We show that the computational cost of the RFC scales only linearly with the number of unknowns, a great improvement compared to the basic LQG control with a computational cost that scales quadratically. We demonstrate that the RFC method can obtain the optimal control values at a greatly reduced computational cost compared to the conventional LQG algorithm with small and controllable losses in the accuracy of the state and parameter estimation.

  4. Oral Vaccine Development by Molecular Display Methods Using Microbial Cells.

    Science.gov (United States)

    Shibasaki, Seiji; Ueda, Mitsuyoshi

    2016-01-01

    Oral vaccines are easier to administer than injectable vaccines. To induce an adequate immune response using vaccines, antigenic proteins are usually combined with adjuvant materials. This chapter presents methodologies for the design of oral vaccines using molecular display technology. In molecular display technology, antigenic proteins are displayed on a microbial cell surface with adjuvant ability. This technology would provide a quite convenient process to produce oral vaccines when the DNA sequence of an efficient antigenic protein is available. As an example, oral vaccines against candidiasis were introduced using two different molecular display systems with Saccharomyces cerevisiae and Lactobacillus casei.

  5. Development of rapid, sensitive and non-radioactive tissue-blot diagnostic method for the detection of citrus greening.

    Science.gov (United States)

    Nageswara-Rao, Madhugiri; Miyata, Shin-Ichi; Ghosh, Dilip; Irey, Mike; Garnsey, Stephen M; Gowda, Siddarame

    2013-01-01

    Citrus huanglongbing (HLB or citrus greening) is one of the most devastating diseases of citrus worldwide. The disease is caused by Gram-negative, phloem-limited α-proteobacterium, 'Candidatus Liberibacter asiaticus', vectored by the psyllid, Diaphorina citri Kuwayama. Citrus plants infected by the HLB bacterium may not show visible symptoms sometimes for years following infection and non-uniform distribution within the tree makes the detection of the pathogen very difficult. Efficient management of HLB disease requires rapid and sensitive detection early in the infection followed by eradication of the source of pathogen and the vector. The polymerase chain reaction (PCR) based method is most commonly employed for screening the infected/suspected HLB plants and psyllids. This is time consuming, cumbersome and not practical for screening large number of samples in the field. To overcome this, we developed a simple, sensitive, non-radioactive, tissue-blot diagnostic method for early detection and screening of HLB disease. Digoxigenin labeled molecular probes specific to 'Ca. L. asiaticus' nucleotide sequences have been developed and used for the detection of the pathogen of the HLB disease. The copy number of the target genes was also assessed using real-time PCR experiments and the optimized real-time PCR protocol allowed positive 'Ca. L. asiaticus' detection in citrus samples infected with 'Ca. L. asiaticus' bacterium. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Rapid classification of heavy metal-exposed freshwater bacteria by infrared spectroscopy coupled with chemometrics using supervised method

    Science.gov (United States)

    Gurbanov, Rafig; Gozen, Ayse Gul; Severcan, Feride

    2018-01-01

    Rapid, cost-effective, sensitive and accurate methodologies to classify bacteria are still in the process of development. The major drawbacks of standard microbiological, molecular and immunological techniques call for the possible usage of infrared (IR) spectroscopy based supervised chemometric techniques. Previous applications of IR based chemometric methods have demonstrated outstanding findings in the classification of bacteria. Therefore, we have exploited an IR spectroscopy based chemometrics using supervised method namely Soft Independent Modeling of Class Analogy (SIMCA) technique for the first time to classify heavy metal-exposed bacteria to be used in the selection of suitable bacteria to evaluate their potential for environmental cleanup applications. Herein, we present the powerful differentiation and classification of laboratory strains (Escherichia coli and Staphylococcus aureus) and environmental isolates (Gordonia sp. and Microbacterium oxydans) of bacteria exposed to growth inhibitory concentrations of silver (Ag), cadmium (Cd) and lead (Pb). Our results demonstrated that SIMCA was able to differentiate all heavy metal-exposed and control groups from each other with 95% confidence level. Correct identification of randomly chosen test samples in their corresponding groups and high model distances between the classes were also achieved. We report, for the first time, the success of IR spectroscopy coupled with supervised chemometric technique SIMCA in classification of different bacteria under a given treatment.

  7. Taming a wild beast: Developing molecular tools and new methods to understand the biology of Zymoseptoria tritici.

    Science.gov (United States)

    Talbot, Nicholas J

    2015-06-01

    Septoria blotch of wheat is one of the world's most serious plant diseases, which is difficult to control due to the absence of durable host resistance and the increasing frequency of fungicide-resistance. The ascomycete fungus that causes the disease, Zymoseptoria tritici, has been very challenging to study. This special issue of Fungal Genetics and Biology showcases an integrated approach to method development and the innovation of new molecular tools to study the biology of Z. tritici. When considered together, these new methods will have a rapid and dramatic effect on our ability to combat this significant disease. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  8. Efficient 3D frequency response modeling with spectral accuracy by the rapid expansion method

    KAUST Repository

    Chu, Chunlei

    2012-07-01

    Frequency responses of seismic wave propagation can be obtained either by directly solving the frequency domain wave equations or by transforming the time domain wavefields using the Fourier transform. The former approach requires solving systems of linear equations, which becomes progressively difficult to tackle for larger scale models and for higher frequency components. On the contrary, the latter approach can be efficiently implemented using explicit time integration methods in conjunction with running summations as the computation progresses. Commonly used explicit time integration methods correspond to the truncated Taylor series approximations that can cause significant errors for large time steps. The rapid expansion method (REM) uses the Chebyshev expansion and offers an optimal solution to the second-order-in-time wave equations. When applying the Fourier transform to the time domain wavefield solution computed by the REM, we can derive a frequency response modeling formula that has the same form as the original time domain REM equation but with different summation coefficients. In particular, the summation coefficients for the frequency response modeling formula corresponds to the Fourier transform of those for the time domain modeling equation. As a result, we can directly compute frequency responses from the Chebyshev expansion polynomials rather than the time domain wavefield snapshots as do other time domain frequency response modeling methods. When combined with the pseudospectral method in space, this new frequency response modeling method can produce spectrally accurate results with high efficiency. © 2012 Society of Exploration Geophysicists.

  9. Combined Campylobacter jejuni and Campylobacter coli Rapid Testing and Molecular Epidemiology in Conventional Broiler Flocks.

    Science.gov (United States)

    Schallegger, G; Muri-Klinger, S; Brugger, K; Lindhardt, C; John, L; Glatzl, M; Wagner, M; Stessl, B

    2016-12-01

    Campylobacter spp. are important causes of bacterial zoonosis, most often transmitted by contaminated poultry meat. From an epidemiological and risk assessment perspective, further knowledge should be obtained on Campylobacter prevalence and genotype distribution in primary production. Consequently, 15 Austrian broiler flocks were surveyed in summer for their thermophilic Campylobacter spp. contamination status. Chicken droppings, dust and drinking water samples were collected from each flock at three separate sampling periods. Isolates were confirmed by PCR and subtyped. We also compared three alternative methods (culture-based enrichment in Bolton broth, culture-independent real-time PCR and a lateral-flow test) for their applicability in chicken droppings. Twelve flocks were found to be positive for thermophilic Campylobacter spp. during the entire sampling period. Seven flocks (46.6%) were contaminated with both, C. jejuni and C. coli, five flocks harboured solely one species. We observed to a majority flock-specific C. jejuni and C. coli genotypes, which dominated the respective flock. Flocks within a distance jejuni genotypes indicating a cross-contamination event via the environment or personnel vectors. Multilocus sequence typing (MLST) of C. jejuni revealed that the majority of isolates were assigned to globally distributed clonal complexes or had a strong link to the human interface (CC ST-446 and ST4373). The combination of techniques poses an advantage over risk assessment studies based on cultures alone, as, in the case of Campylobacter, occurrence of a high variety of genotypes might be present among a broiler flock. We suggest applying the lateral-flow test under field conditions to identify 'high-shedding' broiler flocks at the farm level. Consequently, poultry farmers and veterinarians could improve hygiene measurements and direct sanitation activities, especially during the thinning period. Ultimately, real-time PCR could be applied to quantify

  10. A Simple and Rapid Data Extraction Method for the Precision Aspheric Optical Surface Height

    Science.gov (United States)

    Xing, Guohua; Peng, Yunfeng; Su, Xing

    2017-10-01

    Nowadays, the application of aspheric optics is becoming more and more popular in the precision optical engineering field. Therefore, it urges the rapid development of the precision machining and measuring technology. Generally, the aspheric optical component is measured by the interferometer. The underlying question is that the figure output by interferometer can’t be always recognized by other analysis software or program though the interferometer has its own unique data processing system. In this paper, a robust, rapid and simple method is presented to interpret the surface height data of the precision machined aspheric optical surface. The optical surface is measured by interferometer. The result figure is split into two parts, one of which is the interferogram picture of the whole aspheric optical surface and the other is the colour reference column indicating the height value. The ratios of the red (R), green (G) and blue (B) are analysed based on the middle of the colour reference column, and the corresponding relationship between the colours and surface height is established and looked as a reference data base. Then the interferogram picture of the whole aspheric optical surface is also analysed and divided according to the red (R), green (G) and blue (B) colours. By comparing the ratios and values of RGB colour, the aspheric optical surface height can be extracted approximately. The feasibility of this method was approved by the extraction processing experiment of a polished aspheric optical surface.

  11. A rapid, highly accurate method for quantifying CALR mutant allele burden in persons with myeloproliferative neoplasms.

    Science.gov (United States)

    Yao, Qiu-Mei; Zhou, Jiao; Gale, Robert Peter; Li, Jin-Lan; Li, Ling-Di; Li, Ning; Chen, Shan-Shan; Ruan, Guo-Rui

    2015-10-01

    Calreticulin (CALR) mutations were recently identified in a substantial proportion of persons with essential thrombocythemia (ET) and with primary myelofibrosis (PMF) without JAK2(V617F). Consequently rapid, sensitive, and specific methods to detect and quantify these mutations are needed. We studied samples from 1088 persons with myeloproliferative neoplasms (MPNs) including 421 JAK2(V617F) negative subjects with ET, PMF, polycythemia vera (PV), chronic myeloid leukemia (CML) and hyper-eosinophilic syndrome (HES). Detection of CALR exon 9 mutations was done by PCR amplification followed by fragment length analysis and direct sequencing. Dilution assays were used to determine CALR mutant allele burden. We detected CALR mutations in blood and bone marrow samples from 152 subjects with ET and with PMF but not in samples from normal or persons with PV, CML, or HES. CALR mutant peaks were distinct from wild-type peaks and dilution experiments indicated a sensitivity level of 0.5-5% for a CALR mutant allele in a wild-type background. Diverse types of mutations were detected including deletions, insertions, and complex indels. All mutations were confirmed by direct sequencing. We also used dilution experiments to quantify mutant allele burden. We were able to reproducibly detect mutant allele levels as low 5% (0.5-5%) in a wild-type background. PCR amplification followed by fragment length analysis is a rapid, sensitive, and specific method for screening persons with MPNs for CALR mutations, especially those with ET and PMF and for estimating mutant allele burden.

  12. Rapid fabrication method of a microneedle mold with controllable needle height and width.

    Science.gov (United States)

    Lin, Yen-Heng; Lee, I-Chi; Hsu, Wei-Chieh; Hsu, Ching-Hong; Chang, Kai-Ping; Gao, Shao-Syuan

    2016-10-01

    The main issue of transdermal drug delivery is that macromolecular drugs cannot diffuse through the stratum corneum of skin. Many studies have pursued micro-sized needles encapsulated with drugs to overcome this problem, as these needles can pierce the stratum corneum and allow drugs to enter the circulatory system of the human body. However, most microneedle fabrication processes are time-consuming and require expensive equipment. In this study, we demonstrate a rapid method for fabricating a microneedle mold using drawing lithography and a UV-cured resin. The mold was filled with a water-soluble material, polyvinylpyrrolidone (PVP), which was then demolded to produce a water-soluble microneedle array. The results of an in vitro skin insertion test using PVP microneedles and pig ear skin demonstrated the feasibility of the microneedle mold. In addition, by controlling the viscosity of the UV-cured resin through various heat treatments, microneedles with different heights and aspect ratios were produced. Compared with other methods, this technology significantly simplifies and accelerates the mold fabrication process. In addition, the required equipment is relatively simple and inexpensive. Through this technology, we can rapidly fabricate microneedle molds with controllable dimensions for various applications.

  13. Passive acoustic methods for fine-scale tracking of harbour porpoises in tidal rapids.

    Science.gov (United States)

    Macaulay, Jamie; Gordon, Jonathan; Gillespie, Douglas; Malinka, Chloë; Northridge, Simon

    2017-02-01

    The growing interest in generating electrical power from tidal currents using tidal turbine generators raises a number of environmental concerns, including the risk that marine mammals might be injured or killed through collision with rotating turbine blades. To understand this risk, information on how marine mammals use tidal rapid habitats and in particular, their underwater movements and dive behaviour is required. Porpoises, which are the most abundant small cetacean at most European tidal sites, are difficult animals to tag, and the limited size of tidal habitats means that any telemetered animal would be likely to spend only a small proportion of time within them. Here, an alternative approach is explored, whereby passive acoustic monitoring (PAM) is used to obtain fine scale geo-referenced tracks of harbour porpoises in tidal rapid areas. Large aperture hydrophone arrays are required to obtain accurate locations of animals from PAM data and automated algorithms are necessary to process the large quantities of acoustic data collected on such systems during a typical survey. Methods to automate localisation, including a method to match porpoise detections on different hydrophones and separate different vocalising animals, and an assessment of the localisation accuracy of the large aperture hydrophone array are presented.

  14. Miniaturized fluorescent RNA dot blot method for rapid quantitation of gene expression

    Directory of Open Access Journals (Sweden)

    Yadetie Fekadu

    2004-06-01

    Full Text Available Abstract Background RNA dot blot hybridization is a commonly used technique for gene expression assays. However, membrane based RNA dot/slot blot hybridization is time consuming, requires large amounts of RNA, and is less suited for parallel assays of more than one gene at a time. Here, we describe a glass-slide based miniaturized RNA dot blot (RNA array procedure for rapid and parallel gene expression analysis using fluorescently labeled probes. Results RNA arrays were prepared by simple manual spotting of RNA onto amino-silane coated microarray glass slides, and used for two-color fluorescent hybridization with specific probes labeled with Cy3 and 18S ribosomal RNA house-keeping gene probe labeled with Cy5 fluorescent dyes. After hybridization, arrays were scanned on a fluorescent microarray scanner and images analyzed using microarray image analysis software. We demonstrate that this method gives comparable results to Northern blot analysis, and enables high throughput quantification of transcripts from nanogram quantities of total RNA in hundreds of samples. Conclusion RNA array on glass slide and detection by fluorescently labeled probes can be used for rapid and parallel gene expression analysis. The method is particularly well suited for gene expression assays that involve quantitation of many transcripts in large numbers of samples.

  15. Hyperspectral Imaging as a Rapid Quality Control Method for Herbal Tea Blends

    Directory of Open Access Journals (Sweden)

    Majolie Djokam

    2017-03-01

    Full Text Available In South Africa, indigenous herbal teas are enjoyed due to their distinct taste and aroma. The acclaimed health benefits of herbal teas include the management of chronic diseases such as hypertension and diabetes. Quality control of herbal teas has become important due to the availability of different brands of varying quality and the production of tea blends. The potential of hyperspectral imaging as a rapid quality control method for herbal tea blends from rooibos (Aspalathus linearis, honeybush (Cyclopia intermedia, buchu (Agathosma Betulina and cancerbush (Sutherlandia frutescens was investigated. Hyperspectral images of raw materials and intact tea bags were acquired using a sisuChema shortwave infrared (SWIR hyperspectral pushbroom imaging system (920–2514 nm. Principal component analysis (PCA plots showed clear discrimination between raw materials. Partial least squares discriminant analysis (PLS-DA models correctly predicted the raw material constituents of each blend and accurately determined the relative proportions. The results were corroborated independently using ultra-high performance liquid chromatography coupled to mass spectrometry (UHPLC-MS. This study demonstrated the application of hyperspectral imaging coupled with chemometric modelling as a reliable, rapid and non-destructive quality control method for authenticating herbal tea blends and to determine relative proportions in a tea bag.

  16. Rapid and label-free bioanalytical method of alpha fetoprotein detection using LSPR chip

    Science.gov (United States)

    Kim, Dongjoo; Kim, Jinwoon; Kwak, Cheol Hwan; Heo, Nam Su; Oh, Seo Yeong; Lee, Hoomin; Lee, Go-Woon; Vilian, A. T. Ezhil; Han, Young-Kyu; Kim, Woo-Sik; Kim, Gi-bum; Kwon, Soonjo; Huh, Yun Suk

    2017-07-01

    Alpha fetoprotein (AFP) is a cancer marker, particularly for hepatocellular carcinoma. Normal levels of AFP are less than 20 ng/mL; however, its levels can reach more than 400 ng/mL in patients with HCC. Enzyme linked immunosorbent assay (ELISA) and radioimmunoassay (RIA) have been employed for clinical diagnosis of AFP; however, these methods are time consuming and labor intensive. In this study, we developed a localized surface plasmon resonance (LSPR) based biosensor for simple and rapid detection of AFP. This biosensor consists of a UV-Vis spectrometer, a cuvette cell, and a biosensor chip nanopatterned with gold nanoparticles (AuNPs). In our LSPR biosensor, binding of AFP to the surface of the sensor chip led to an increasing magnitude of the LSPR signals, which was measured by an ultraviolet-visible (UV-Vis) spectrometer. Our LSPR biosensor showed sufficient detectability of AFP at concentrations of 1 ng/mL to 1 μg/mL. Moreover, the overall procedure for detection of AFP was completed within 20 min. This biosensor could also be utilized for a point of care test (POCT) by employing a portable UV-Vis spectrometer. Owing to the simplicity and rapidity of the detection process, our LSPR biosensor is expected to replace traditional diagnostic methods for the early detection of diseases.

  17. Comparison of three molecular detection methods for detection of Trichinella in infected pigs.

    Science.gov (United States)

    Lin, Zhibing; Cao, Jie; Zhang, Houshuang; Zhou, Yongzhi; Deng, Mingjun; Li, Guoqing; Zhou, Jinlin

    2013-05-01

    Different molecular detection methods require diverse molecular platforms, but there is no uniform standard for people to reference in the detection of Trichinella. In this study, real-time PCR, loop-mediated isothermal amplification (LAMP), and conventional PCR were developed for the detection of Trichinella by targeting mitochondrial large subunit ribosomal DNA (mt-lsrDNA). We compared the performance of the three newly developed assays. The results revealed that the detection limits of the real-time PCR, LAMP, and conventional PCR assays were 10 and 100 fg/μL and 1 pg/μL of Trichinella spiralis genomic DNA, respectively. The assays were used in the detection of Trichinella in the field. A total of 192 samples were obtained from pigs: 75 samples from free range farming and 117 from intensive feeding factory. The infection rate was 8/192 (4.2 %), 7/192 (3.6 %), and 1/192 (1.0 %) through the real-time PCR, LAMP, and conventional PCR assays, respectively. These data indicate that Taqman real-time PCR was a rapid, specific, and sensitive tool as a preferred option for investigation of valuable samples, but that LAMP assay was closed tube, highly sensitive, cost-effective, rapid, easy-to-perform, and was the optimal choice for detection of Trichinella in the field. The results of a model of experimental infection in mice indicated that spleen can be used as sampling site for the detection of early T. spiralis infection. However, the diaphragm and myocardium were the most suitable sampling sites for the detection of T. spiralis.

  18. Rapid HPLC method for the simultaneous monitoring of duloxetine, venlaflaxine, fluoxetine and paroxetine in biofluids.

    Science.gov (United States)

    Samanidou, Victoria F; Kourti, Paraskevi V

    2009-08-01

    A simple and rapid HPLC method is developed for the determination of two serotonin-norepinephrine-reuptake inhibitors (duloxetine and venlaflaxine) and two selective serotonin-reuptake inhibitors (fluoxetine and paroxetine) in human biofluids. Separation was performed on an Inertsil ODS-3 column (250 x 4.0 mm, 5 µm) with acetonitrile-ammonium acetate (0.05 M, 41:59 v/v) at 235 nm, within 7 min. SPE on Oasis(®) HLB cartridges was applied for the isolation of analytes from biofluids. The developed methodology was validated in terms of sensitivity, linearity, accuracy, precision, stability and selectivity. Relative standard deviation was less than 10.4%. Limit of detection was 0.2-0.6 ng/µl in blood plasma and 0.1-0.8 ng/µl in urine. The method was successfully applied to biofluids from a patient under duloxetine treatment.

  19. A rapid and scalable method for selecting recombinant mouse monoclonal antibodies

    Directory of Open Access Journals (Sweden)

    Wright Gavin J

    2010-06-01

    Full Text Available Abstract Background Monoclonal antibodies with high affinity and selectivity that work on wholemount fixed tissues are valuable reagents to the cell and developmental biologist, and yet isolating them remains a long and unpredictable process. Here we report a rapid and scalable method to select and express recombinant mouse monoclonal antibodies that are essentially equivalent to those secreted by parental IgG-isotype hybridomas. Results Increased throughput was achieved by immunizing mice with pools of antigens and cloning - from small numbers of hybridoma cells - the functionally rearranged light and heavy chains into a single expression plasmid. By immunizing with the ectodomains of zebrafish cell surface receptor proteins expressed in mammalian cells and screening for formalin-resistant epitopes, we selected antibodies that gave expected staining patterns on wholemount fixed zebrafish embryos. Conclusions This method can be used to quickly select several high quality monoclonal antibodies from a single immunized mouse and facilitates their distribution using plasmids.

  20. A Rapid Colorimetric Method Reveals Fraudulent Substitutions in Sea Urchin Roe Marketed in Sardinia (Italy).

    Science.gov (United States)

    Meloni, Domenico; Spina, Antonio; Satta, Gianluca; Chessa, Vittorio

    2016-06-25

    In recent years, besides the consumption of fresh sea urchin specimens, the demand of minimally-processed roe has grown considerably. This product has made frequent consumption in restaurants possible and frauds are becoming widespread with the partial replacement of sea urchin roe with surrogates that are similar in colour. One of the main factors that determines the quality of the roe is its colour and small differences in colour scale cannot be easily discerned by the consumers. In this study we have applied a rapid colorimetric method for reveal the fraudulent partial substitution of semi-solid sea urchin roe with liquid egg yolk. Objective assessment of whiteness (L*), redness (a*), yellowness (b*), hue (h*), and chroma (C*) was carried out with a digital spectrophotometer using the CIE L*a*b* colour measurement system. The colorimetric method highlighted statistically significant differences among sea urchin roe and liquid egg yolk that could be easily discerned quantitatively.

  1. Novel high/low solubility classification methods for new molecular entities.

    Science.gov (United States)

    Dave, Rutwij A; Morris, Marilyn E

    2016-09-10

    This research describes a rapid solubility classification approach that could be used in the discovery and development of new molecular entities. Compounds (N=635) were divided into two groups based on information available in the literature: high solubility (BDDCS/BCS 1/3) and low solubility (BDDCS/BCS 2/4). We established decision rules for determining solubility classes using measured log solubility in molar units (MLogSM) or measured solubility (MSol) in mg/ml units. ROC curve analysis was applied to determine statistically significant threshold values of MSol and MLogSM. Results indicated that NMEs with MLogSM>-3.05 or MSol>0.30mg/mL will have ≥85% probability of being highly soluble and new molecular entities with MLogSM≤-3.05 or MSol≤0.30mg/mL will have ≥85% probability of being poorly soluble. When comparing solubility classification using the threshold values of MLogSM or MSol with BDDCS, we were able to correctly classify 85% of compounds. We also evaluated solubility classification of an independent set of 108 orally administered drugs using MSol (0.3mg/mL) and our method correctly classified 81% and 95% of compounds into high and low solubility classes, respectively. The high/low solubility classification using MLogSM or MSol is novel and independent of traditionally used dose number criteria. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Rapid molecular identification of armored scale insects (Hemiptera: Diaspididae) on Mexican 'Hass' avocado.

    Science.gov (United States)

    Rugman-Jones, Paul F; Morse, Joseph G; Stouthamer, Richard

    2009-10-01

    'Hass' avocado, Persea americana Mill., fruit imported into California from Mexico are infested with high levels of armored scale insects (Hemiptera: Diaspididae), constituting several species. The paucity and delicate nature of morphological characters traditionally used to diagnose armored scales often require careful preparation of slide-mounted specimens and expert knowledge of the group, for their accurate identification. Here, we present a simple, quick, and accurate means to identify armored scales on Mexican avocados, based on amplification of the internal transcribed spacer two of ribosomal DNA, by using the polymerase chain reaction (PCR). This region seems to show a high level of intraspecific conformity among scale specimens originating from different localities. A suite of species-specific reverse PCR primers are combined in a single reaction, with a universal forward primer, and produce a PCR product of a unique size, that after standard gel electrophoresis, allows the direct diagnosis of six diaspidid species: Abgrallaspis aguacatae Evans, Watson & Miller; Hemiberlesia lataniae (Signoret); Hemiberlesia sp. near latania; Hemiberlesia rapax (Comstock); Acutaspis albopicta (Cockerell); and Pinnaspis strachani (Cooley). Two additional species, Diaspis miranda (Cockerell) and Diaspis sp. near miranda, also are separated from the others by using this method and are subsequently diagnosed by secondary digestion of the PCR product with the restriction endonuclease smaI.

  3. Development of rapid methods for relaxation time mapping and motion estimation using magnetic resonance imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gilani, Syed Irtiza Ali

    2008-09-15

    Recent technological developments in the field of magnetic resonance imaging have resulted in advanced techniques that can reduce the total time to acquire images. For applications such as relaxation time mapping, which enables improved visualisation of in vivo structures, rapid imaging techniques are highly desirable. TAPIR is a Look- Locker-based sequence for high-resolution, multislice T{sub 1} relaxation time mapping. Despite the high accuracy and precision of TAPIR, an improvement in the k-space sampling trajectory is desired to acquire data in clinically acceptable times. In this thesis, a new trajectory, termed line-sharing, is introduced for TAPIR that can potentially reduce the acquisition time by 40 %. Additionally, the line-sharing method was compared with the GRAPPA parallel imaging method. These methods were employed to reconstruct time-point images from the data acquired on a 4T high-field MR research scanner. Multislice, multipoint in vivo results obtained using these methods are presented. Despite improvement in acquisition speed, through line-sharing, for example, motion remains a problem and artefact-free data cannot always be obtained. Therefore, in this thesis, a rapid technique is introduced to estimate in-plane motion. The presented technique is based on calculating the in-plane motion parameters, i.e., translation and rotation, by registering the low-resolution MR images. The rotation estimation method is based on the pseudo-polar FFT, where the Fourier domain is composed of frequencies that reside in an oversampled set of non-angularly, equispaced points. The essence of the method is that unlike other Fourier-based registration schemes, the employed approach does not require any interpolation to calculate the pseudo-polar FFT grid coordinates. Translation parameters are estimated by the phase correlation method. However, instead of two-dimensional analysis of the phase correlation matrix, a low complexity subspace identification of the phase

  4. Autoclave method for rapid preparation of bacterial PCR-template DNA.

    Science.gov (United States)

    Simmon, Keith E; Steadman, Dewey D; Durkin, Sarah; Baldwin, Amy; Jeffrey, Wade H; Sheridan, Peter; Horton, Rene; Shields, Malcolm S

    2004-02-01

    An autoclave method for preparing bacterial DNA for PCR template is presented, it eliminates the use of detergents, organic solvents, and mechanical cellular disruption approaches, thereby significantly reducing processing time and costs while increasing reproducibility. Bacteria are lysed by rapid heating and depressurization in an autoclave. The lysate, cleared by microcentrifugation, was either used directly in the PCR reaction, or concentrated by ultrafiltration. This approach was compared with seven established methods of DNA template preparation from four bacterial sources which included boiling Triton X-100 and SDS, bead beating, lysozyme/proteinase K, and CTAB lysis method components. Bacteria examined were Enterococcus and Escherichia coli, a natural marine bacterial community and an Antarctic cyanobacterial-mat. DNAs were tested for their suitability as PCR templates by repetitive element random amplified polymorphic DNA (RAPD) and denaturing gradient gel electrophoresis (DGGE) analysis. The autoclave method produced PCR amplifiable template comparable or superior to the other methods, with greater reproducibility, much shorter processing time, and at a significantly lower cost.

  5. Development of a micropulverized extraction method for rapid toxicological analysis of methamphetamine in hair.

    Science.gov (United States)

    Miyaguchi, Hajime; Kakuta, Masaya; Iwata, Yuko T; Matsuda, Hideaki; Tazawa, Hidekatsu; Kimura, Hiroko; Inoue, Hiroyuki

    2007-09-07

    We developed a rapid sample preparation method for the toxicological analysis of methamphetamine and amphetamine (the major metabolite of methamphetamine) in human hair by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), to facilitate fast screening and quantitation. Two milligrams of hair were mechanically micropulverized for 5 min in a 2-ml plastic tube together with 100 microl of an aqueous solvent containing 10% acetonitrile, 100 mM trifluoroacetic acid and the corresponding deuterium analogues as internal standards. The pulverizing highly disintegrated the hair components, simultaneously allowing the extraction of any drugs present in the hair. After filtering the suspension with a membrane-filter unit, the clear filtrate was directly analyzed by HPLC-MS/MS. No evaporation processes were required for sample preparation. Method optimization and validation study were carried out using real-case specimens and fortified samples in which the drugs had been artificially absorbed, respectively. Concentration ranges for quantitation were 0.040-125 and 0.040-25 ng/mg for methamphetamine and amphetamine, respectively. Real-case specimens were analyzed by the method presented here and by conventional ones to verify the applicability of our method to real-world analysis. Our method took less than 30 min for a set of chromatograms to be obtained from a washed hair sample.

  6. NATO Advanced Research Workshop, 19-22 May 1997: Rapid Method for Monitoring the Environment for Biological Hazards.

    Science.gov (United States)

    1997-05-22

    The NATO Advanced Research Workshop met for the purpose of bringing to light rapid methods for monitoring the environment for biological hazards such as biological warfare agents, naturally occurring diseases, detection and identification of different biological threats in the environment , dormancy in non-sporulating bacteria and bioluminescence techniques with respect to the rapid detection of microbes in air, water and food.

  7. Development of magnetic molecularly imprinted polymers with double templates for the rapid and selective determination of amphenicol antibiotics in water, blood, and egg samples.

    Science.gov (United States)

    Wei, Shoulian; Li, Jianwen; Liu, Yong; Ma, Jinkui

    2016-11-18

    A magnetic mesoporous dual-template molecularly imprinted polymer (Fe3O4@mSiO2 @DMIP) with a specific recognition capability for chloramphenicol (CAP) and florfenicol (FF) was synthesised. CAP and FF were used as dual-template molecules, α-methacrylic acid and Fe3O4@mSiO2@-CHCH2 as dual functional monomers, and ethylene glycol dimethyl methacrylate as a crosslinking agent. For comparison, a magnetic mesoporous non-molecularly imprinted polymer (Fe3O4@mSiO2@NIP) was also prepared using the same synthesis procedure, but without the dual templates. The prepared polymers were characterised using scanning electron microscopy, Fourier-transform infrared spectroscopy and adsorption experiments. Results indicated that both the Fe3O4@mSiO2@DMIP and the Fe3O4@mSiO2 @NIP were microspherical nanoparticles, and the surface of the Fe3O4@mSiO2@DMIP was rougher than that of the Fe3O4@mSiO2@NIP. In addition, the prepared Fe3O4@mSiO2@DMIP possessed a higher adsorption capacity and better selectivity for CAP and FF than the Fe3O4@mSiO2@NIP. The maximum static adsorption capacities of the Fe3O4@mSiO2@ DMIP for CAP and FF were 146.5 and 190.1mgg-1, respectively, whereas those of the Fe3O4@mSiO2 @NIP were 50.0 and 44.0mgg-1, respectively. The obtained Fe3O4@mSiO2@DMIP particles were applied as a magnetic solid-phase extraction sorbent for the rapid and selective extraction of CAP, FF, and thiamphenicol (TAP) in water, chicken blood and egg samples. The method of magnetic molecularly imprinted solid-phase extraction (M-MISPE) coupled to high-performance liquid chromatography with UV detection (HPLC-UV) was conducted to detect CAP, FF, and TAP. The limits of detection for CAP, FF, and TAP were 0.16, 0.08, and 0.08μgkg-1, respectively. The average recovery and precision values for the spiked water, chicken blood, and egg samples ranged from 88.3% to 99.1% and 2.7% to 7.9%, respectively. Given its rapidity, selectivity, and sensitivity, the developed method of M-MISPE coupled to HPLC

  8. Bioluminescence-based identification of nisin producers - a rapid and simple screening method for nisinogenic bacteria in food samples.

    Science.gov (United States)

    Virolainen, Nina; Guglielmetti, Simone; Arioli, Stefania; Karp, Matti

    2012-08-17

    We present a simple and rapid method for screening nisin producers that directly identifies nisinogenic bacteria by induction of bioluminescence within the Lactococcus lactis NZ9800lux biosensor strain (Immonen and Karp, 2007, Biosensors and Bioelectronics 22, 1982-7). An overlay of putative nisinogenic colonies with the biosensor strain gives identification results within 1h. Functionality and specificity of the method were verified by screening nisin producers among 144 raw milk colonies and a panel of 91 lactococcal strains. Studies performed on strains and colonies that did not induce bioluminescence but inhibited growth of the biosensor demonstrated that only nisinogenic bacteria can cause induction. Bacteria known to produce bacteriocins other than nisin failed to induce bioluminescence, further verifying the specificity of the assay. We discovered a non-inducing but inhibitory lactococcal strain harboring a modified nisin Z gene, and demonstrated that the source of the inhibitory action is not a non-inducing variant of nisin, but a bacteriocin of lower molecular weight. The concentration of nisin producers in a raw milk sample was 1.3 × 10(2)CFU/ml. We identified from raw milk a total of seven nisin Z producing L. lactis subsp. lactis colonies, which were shown by genetic fingerprinting to belong to three different groups. Among the panel of 91 lactococci, four strains were nisin A producers, and one strain harbored the modified nisin Z gene. The method presented here is robust, cost-effective and simple to perform, and avoids the pitfalls of traditional screening methods by directly specifying the identity of the inhibitory substance. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Rapid Assessment of Health Services in Punjab using a Mixed Method Approach

    Directory of Open Access Journals (Sweden)

    Rajesh Kumar

    2015-06-01

    Full Text Available Introduction: The out-of-pocket expenditure is quite high in Punjab. Hence, a rapid review of health facilities was undertaken to suggest remedial measures. Methods: Mixed method research approach was used to identify strengths and weaknesses of the health services in Punjab. All health institutions were included in the assessment from the three purposively sampled districts – one from each of the three regions of Punjab. Tools were developed to collect data from record review, observations, and in-depth interviews. Six building blocks framework proposed by the World Health Organization was used for data collection and analyses. Results: In general physical infrastructure, especially the buildings were found to be reasonably constructed at most of the healthcare facilities. However, the maintenance was not regular. The vacancies for general doctors, specialist doctors, nurses, and paramedics were 26%, 38%, 31% and 12% respectively. Supply of drugs was irregular and inadequate. A large proportion (45% of ‘user charges’ were spent on purchase of drugs and other consumables. Most registers were found to be updated, and reports were transmitted to higher levels usually on time. However, institutionalized system of monitoring and supervision was lacking. Govt. hospitals were providing in-patient care to about 35.5% of those who were estimated to need hospitalization. State had allocated about Rs. 1200 crores to health (0.46% of GDP, thus, spending only Rs. 433 per capita per year. Conclusions: Despite constraints, the government health service is catering to the needs of a large section of the population. Rapid health system assessment at periodic intervals using a mixed method approach can supplement routine monitoring of the health system.

  10. A rapid method of detecting autoantibody against FcεRIα for chronic spontaneous urticaria.

    Directory of Open Access Journals (Sweden)

    Mey-Fann Lee

    Full Text Available BACKGROUND: Chronic spontaneous urticaria (CU is a common skin disorder, with an estimated prevalence of 0.5-1.8% in most populations. Around 30-50% of CU patients have an autoimmune etiology, with autoantibodies (autoAbs against IgE, FcεRIα, and FcεRII/CD23. Although the in vivo autologous serum skin test (ASST and in vitro histamine release/activation assay are the most frequently used screening methods, these two have many limitations and do not directly measure susceptible autoAbs. This study aimed to establish an in vitro rapid screening test using recombinant autoantigen FcεRIα(rFcεRIα to improve the diagnosis of autoimmune urticaria. METHODS: Forty patients with CU and 20 healthy individuals were enrolled. After PCR-based cloning and the production of extracellular fragments of the FcεRIα protein using the E. coli expression system, serum autoAb to rFcεRIα was evaluated using in-house ELISA and rapid immunodot test. RESULTS: In ELISA-based detection, 14 out of 20 CU-ASST(+ patients exhibited anti- FcεRIα responses, whereas five of the 20 CU-ASST(- and two of the 20 non-CU patients showed autoantibody background in the assay. For the immunodot test, 55% (11/20 of the CU-ASST(+ sera exhibited anti-FcεRIα reactivity. There was no false positive among the CU-ASST(- and non-CU groups. Using clinical urticaria plus ASST(+ as the gold standard, in-house ELISA had 70% sensitivity, 82.5% specificity, and positive likelihood ratio of 4, while immunodot had 55% sensitivity, 100% specificity, and positive likelihood ratio >55. CONCLUSIONS: This study has developed a rapid immunodot method with high specificity for detecting autoAb to FcεRIαin patients with CU. Preliminary data indicates that this immunodot technique has the potential to be a routine diagnostic assay for autoimmune CU.

  11. Rapid Hydrothermal Synthesis of Zinc Oxide Nanowires by Annealing Methods on Seed Layers

    Directory of Open Access Journals (Sweden)

    Jang Bo Shim

    2011-01-01

    Full Text Available Well-aligned zinc oxide (ZnO nanowire arrays were successfully synthesized on a glass substrate using the rapid microwave heating process. The ZnO seed layers were produced by spinning the precursor solutions onto the substrate. Among coatings, the ZnO seed layers were annealed at 100°C for 5 minutes to ensure particle adhesion to the glass surface in air, nitrogen, and vacuum atmospheres. The annealing treatment of the ZnO seed layer was most important for achieving the high quality of ZnO nanowire arrays as ZnO seed nanoparticles of larger than 30 nm in diameter evolve into ZnO nanowire arrays. Transmission electron microscopy analysis revealed a single-crystalline lattice of the ZnO nanowires. Because of their low power (140 W, low operating temperatures (90°C, easy fabrication (variable microwave sintering system, and low cost (90% cost reduction compared with gas condensation methods, high quality ZnO nanowires created with the rapid microwave heating process show great promise for use in flexible solar cells and flexible display devices.

  12. A Rapid and Efficient Method for Evaluation of Suspect Testimony: Palynological Scanning.

    Science.gov (United States)

    Wiltshire, Patricia E J; Hawksworth, David L; Edwards, Kevin J

    2015-11-01

    A rapid method for evaluating suspect testimony is valuable at any stage in an inquiry and can result in a change of direction in an investigation. Rape cases, in particular, can present problems where a defendant renders DNA analysis redundant by claiming that the claimant consented to have sexual relations. Forensic palynology is valuable in confirming or eliminating locations as being crime scenes, thus checking the testimony of both parties. In contrast to some forensic disciplines, forensic palynology can provide critical information without time-consuming full analysis. Two cases are described where the palynological assemblages from comparator samples of pertinent places were compared with those obtained from clothing of claimants and defendants. The results of rapid microscopical scanning of relevant preparations led to early confessions, thus obviating the need for costly analyses and protracted court proceedings. A third case demonstrates the unbiased nature of this technique where a man, although innocent of any offense, lied about having visited the crime scene for fear of prosecution. This highlights the need for sensitive policing in claims of rape. © 2015 American Academy of Forensic Sciences.

  13. Rapid and Sensitive Lateral Flow Immunoassay Method for Procalcitonin (PCT Based on Time-Resolved Immunochromatography

    Directory of Open Access Journals (Sweden)

    Xiang-Yang Shao

    2017-02-01

    Full Text Available Procalcitonin (PCT is a current, frequently-used marker for severe bacterial infection. The aim of this study was to develop a cost-effective detection kit for rapid quantitative and on-site detection of PCT. To develop the new PCT quantitative detecting kit, a double-antibody sandwich immunofluorescent assay was employed based on time-resolved immunofluorescent assay (TRFIA combined with lateral flow immunoassay (LFIA. The performance of the new developed kit was evaluated in the aspects of linearity, precision, accuracy, and specificity. Two-hundred thirty-four serum samples were enrolled to carry out the comparison test. The new PCT quantitative detecting kit exhibited a higher sensitivity (0.08 ng/mL. The inter-assay coefficient of variation (CV and the intra-assay CV were 5.4%–7.7% and 5.7%–13.4%, respectively. The recovery rates ranged from 93% to 105%. Furthermore, a high correlation (n = 234, r = 0.977, p < 0.0001 and consistency (Kappa = 0.875 were obtained when compared with the PCT kit from Roche Elecsys BRAHMS. Thus, the new quantitative method for detecting PCT has been successfully established. The results indicated that the newly-developed system based on TRFIA combined with LFIA was suitable for rapid and on-site detection for PCT, which might be a useful platform for other biomarkers in point-of-care tests.

  14. Bacterial Cytological Profiling (BCP as a Rapid and Accurate Antimicrobial Susceptibility Testing Method for Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    D.T. Quach

    2016-02-01

    Full Text Available Successful treatment of bacterial infections requires the timely administration of appropriate antimicrobial therapy. The failure to initiate the correct therapy in a timely fashion results in poor clinical outcomes, longer hospital stays, and higher medical costs. Current approaches to antibiotic susceptibility testing of cultured pathogens have key limitations ranging from long run times to dependence on prior knowledge of genetic mechanisms of resistance. We have developed a rapid antimicrobial susceptibility assay for Staphylococcus aureus based on bacterial cytological profiling (BCP, which uses quantitative fluorescence microscopy to measure antibiotic induced changes in cellular architecture. BCP discriminated between methicillin-susceptible (MSSA and -resistant (MRSA clinical isolates of S. aureus (n = 71 within 1–2 h with 100% accuracy. Similarly, BCP correctly distinguished daptomycin susceptible (DS from daptomycin non-susceptible (DNS S. aureus strains (n = 20 within 30 min. Among MRSA isolates, BCP further identified two classes of strains that differ in their susceptibility to specific combinations of beta-lactam antibiotics. BCP provides a rapid and flexible alternative to gene-based susceptibility testing methods for S. aureus, and should be readily adaptable to different antibiotics and bacterial species as new mechanisms of resistance or multidrug-resistant pathogens evolve and appear in mainstream clinical practice.

  15. OSO paradigm--A rapid behavioral screening method for acute psychosocial stress reactivity in mice.

    Science.gov (United States)

    Brzózka, M M; Unterbarnscheidt, T; Schwab, M H; Rossner, M J

    2016-02-09

    Chronic psychosocial stress is an important environmental risk factor for the development of psychiatric diseases. However, studying the impact of chronic psychosocial stress in mice is time consuming and thus not optimally suited to 'screen' increasing numbers of genetically manipulated mouse models for psychiatric endophenotypes. Moreover, many studies focus on restraint stress, a strong physical stressor with limited relevance for psychiatric disorders. Here, we describe a simple and a rapid method based on the resident-intruder paradigm to examine acute effects of mild psychosocial stress in mice. The OSO paradigm (open field--social defeat--open field) compares behavioral consequences on locomotor activity, anxiety and curiosity before and after exposure to acute social defeat stress. We first evaluated OSO in male C57Bl/6 wildtype mice where a single episode of social defeat reduced locomotor activity, increased anxiety and diminished exploratory behavior. Subsequently, we applied the OSO paradigm to mouse models of two schizophrenia (SZ) risk genes. Transgenic mice with neuronal overexpression of Neuregulin-1 (Nrg1) type III showed increased risk-taking behavior after acute stress exposure suggesting that NRG1 dysfunction is associated with altered affective behavior. In contrast, Tcf4 transgenic mice displayed a normal stress response which is in line with the postulated predominant contribution of TCF4 to cognitive deficits of SZ. In conclusion, the OSO paradigm allows for rapid screening of selected psychosocial stress-induced behavioral endophenotypes in mouse models of psychiatric diseases. Copyright © 2015 IBRO. Published by Elsevier Ltd. All rights reserved.

  16. Performance of a Micro-UAV lifting system built with the usage of rapid prototyping methods

    Science.gov (United States)

    Dalewski, R. T.; Gumowski, K.; Barczak, T.; Godek, J.

    2014-08-01

    This article presents results of the aerodynamic testing of a micro unmanned aerial vehicle rotor efficiency. The rotors were prepared as a set of two rotors in a counter-rotating ducted drive. Prototypes of the drives were made using two rapid prototyping techniques - FDM - fused deposition modelling method and SLS - selective laser sintering. Rotors were made then treated by introducing additional finishing cyanoacrylate coating and abrasive processing. Main differences between those models were observed in fan shape, porosity, surface roughness and mechanical properties - stiffness. An influence of these factors was observed on an aerodynamic efficiency. For the obtained prototypes both simulations and experimental testing were conducted with thrust, power, torque measurements, as well as the measurement of velocity and pressure distribution at the outlet of the duct. The results show the possibility of using rapid prototyping techniques to produce prototypes of drives operating in the low and medium Reynolds numbers (6000-60000), and the aerodynamic shape relevant factors affecting the preparation and performance of such drives. In addition, simulation studies were performed using the Fluent environment where experimental results were confronted with the results of simulation studies.

  17. Use of a modified cluster sampling method to perform rapid needs assessment after Hurricane Andrew.

    Science.gov (United States)

    Hlady, W G; Quenemoen, L E; Armenia-Cope, R R; Hurt, K J; Malilay, J; Noji, E K; Wurm, G

    1994-04-01

    To rapidly obtain population-based estimates of needs in the early aftermath of Hurricane Andrew in South Florida. We used a modified cluster-sampling method (the Expanded Programme on Immunization [EPI] method) for three surveys. We selected a systematic sample of 30 quarter-mile square clusters for each survey and, beginning from a random start, interviewed members of seven consecutive occupied households in each cluster. Two surveys were of the most affected area (1990 population, 32,672) at three and ten days after the hurricane struck; one survey was of a less affected area (1990 population, 15,576) seven days after the hurricane struck. Results were available within 24 hours of beginning each survey. Initial findings emphasized the need for restoring utilities and sanitation and helped to focus medical relief on primary care and preventive services. The second survey of the most affected area showed improvement in the availability of food, water, electricity, and sanitation (P < or = .05). There was no evidence of disease outbreaks. For the first time, the EPI method provided population-based information to guide and evaluate relief operations after a sudden-impact natural disaster. An improvement over previous approaches, the EPI method warrants further evaluation as a needs assessment tool in acute disasters.

  18. ATP bioluminescence method: tool for rapid screening of organic and microbial contaminants on deteriorated mural paintings.

    Science.gov (United States)

    Unković, Nikola; Ljaljević Grbić, Milica; Stupar, Miloš; Vukojević, Jelena; Subakov-Simić, Gordana; Jelikić, Aleksa; Stanojević, Dragan

    2015-11-24

    The extent of the microbial contamination of the seventeenth-century wall paintings in the nave of the old Church of the Holy Ascension (Veliki Krčimir, Serbia) was evaluated via newly implemented ATP bioluminescence method, and traditional cultivation-based method, utilising commercially available dip slides. To assess the validity of ATP, as a biomarker for rapid detection of mural surface contamination, obtained zones of cleanliness values, in range from 1.0 to 5.3, were compared to documented total microbial counts, ranging between seven and 247 CFU/cm 2 . Small coefficients of determination, 0.0106-0.0385, suggest poor correlation between microbial counts and surface ATP levels; however, zones of cleanliness values are of great help in determining the high points of contamination, aka 'hotspots', which should be given special attention during sampling and investigation using other methods. In addition, various aspects of the possible implementation of the ATP bioluminescence method in an integrated system of wall painting conservation are discussed.

  19. A Rapid Dialysis Method for Analysis of Artificial Sweeteners in Foods (2nd Report).

    Science.gov (United States)

    Tahara, Shoichi; Yamamoto, Sumiyo; Yamajima, Yukiko; Miyakawa, Hiroyuki; Uematsu, Yoko; Monma, Kimio

    2017-01-01

    Following the previous report, a rapid dialysis method was developed for the extraction and purification of four artificial sweeteners, namely, sodium saccharide (Sa), acesulfame potassium (AK), aspartame (APM), and dulcin (Du), which are present in various foods. The method was evaluated by the addition of 0.02 g/kg of these sweeteners to a cookie sample, in the same manner as in the previous report. Revisions from the previous method were: reduction of the total dialysis volume from 200 to 100 mL, change of tube length from 55 to 50 cm, change of dialysate from 0.01 mol/L hydrochloric aqueous solution containing 10% sodium chloride to 30% methanol solution, and change of dialysis conditions from ambient temperature with occasional shaking to 50℃ with shaking at 160 rpm. As a result of these revisions, the recovery reached 99.3-103.8% with one hour dialysis. The obtained recovery yields were comparable to the recovery yields in the previous method with four hour dialysis.

  20. ReagentTF: a rapid and versatile optical clearing method for biological imaging(Conference Presentation)

    Science.gov (United States)

    Yu, Tingting; Zhu, Jingtan; Li, Yusha; Qi, Yisong; Xu, Jianyi; Gong, Hui; Luo, Qingming; Zhu, Dan

    2017-02-01

    The emergence of various optical clearing methods provides a great potential for imaging deep inside tissues by combining with multiple-labelling and microscopic imaging techniques. They were generally developed for specific imaging demand thus presented some non-negligible limitations such as long incubation time, tissue deformation, fluorescence quenching, incompatibility with immunostaining or lipophilic tracers. In this study, we developed a rapid and versatile clearing method, termed ReagentTF, for deep imaging of various fluorescent samples. This method can not only efficiently clear embryos, neonatal whole-brains and adult thick brain sections by simple immersion in aqueous mixtures with minimal volume change, but also can preserve fluorescence of various fluorescent proteins and simultaneously be compatible with immunostaining and lipophilic neuronal dyes. We demonstrate the effectiveness of this method in reconstructing the cell distributions of mouse hippocampus, visualizing the neural projection from CA1 (Cornu Ammonis 1) to HDB (nucleus of the horizontal limb of the diagonal band), and observing the growth of forelimb plexus in whole-mount embryos. These results suggest that ReagentTF is useful for large-volume imaging and will be an option for the deep imaging of biological tissues.

  1. Computationally rapid method of estimating signal-to-noise ratio for phased array image reconstructions.

    Science.gov (United States)

    Wiens, Curtis N; Kisch, Shawn J; Willig-Onwuachi, Jacob D; McKenzie, Charles A

    2011-10-01

    Measuring signal-to-noise ratio (SNR) for parallel MRI reconstructions is difficult due to spatially dependent noise amplification. Existing approaches for measuring parallel MRI SNR are limited because they are not applicable to all reconstructions, require significant computation time, or rely on repeated image acquisitions. A new SNR estimation approach is proposed, a hybrid of the repeated image acquisitions method detailed in the National Electrical Manufacturers Association (NEMA) standard and the Monte Carlo based pseudo-multiple replica method, in which the difference between images reconstructed from the unaltered acquired data and that same data reconstructed after the addition of calibrated pseudo-noise is used to estimate the noise in the parallel MRI image reconstruction. This new noise estimation method can be used to rapidly compute the pixel-wise SNR of the image generated from any parallel MRI reconstruction of a single acquisition. SNR maps calculated with the new method are validated against existing SNR calculation techniques. Copyright © 2011 Wiley-Liss, Inc.

  2. A rapid and sensitive method for the detection of aromatic amines in cosmetics.

    Science.gov (United States)

    Hailong, Xiao; Fen, Qian; Ying, Xu; Jianhong, Pan; Haiyun, Tu; Hongqing, Wang; Saijun, Lin; Jichun, Han

    2014-02-01

    Aromatic amines (AAs) are common chemical pollutants and banned ingredients in cosmetics. In this study, a rapid, simple and stable method for the detection of nine AAs in cosmetics was established based on the optimization of cation exchange solid-phase extraction and liquid chromatography tandem mass spectrometry. The method displayed good linearity within a range of 2-1,000 µg/kg, with limits of quantitation at the level of µg/kg for cosmetic samples. The recoveries obtained for all analyzed amines ranged between 83.6 and 97.8%, and the repeatability (r) and reproducibility (R) values indicated that all nine AAs showed good precision (r ≤ 4.5% and R ≤ 7.7%). The method was applied for the detection of 36 cosmetic samples. It was found that the primary pollutants of AAs were 3, 3'-dichlorobenzidine and 4-aminoazobenzene. The total amine concentration in cosmetic samples ranged from 880 to 5,200 µg/kg. The proposed method is applicable for the analysis of most cosmetic samples.

  3. A simple and rapid method to characterize lipid fate in skeletal muscle.

    Science.gov (United States)

    Massart, Julie; Zierath, Juleen R; Chibalin, Alexander V

    2014-06-24

    Elevated fatty acids contribute to the development of type 2 diabetes and affect skeletal muscle insulin sensitivity. Since elevated intramuscular lipids and insulin resistance is strongly correlated, aberrant lipid storage or lipid intermediates may be involved in diabetes pathogenesis. The aim of this study was to develop a method to determine the dynamic metabolic fate of lipids in primary human skeletal muscle cells and in intact mouse skeletal muscle. We report a simple and fast method to characterize lipid profiles in skeletal muscle using thin layer chromatography. The described method was specifically developed to assess lipid utilization in cultured and intact skeletal muscle. We determined the effect of a pan-diacylglycerol kinase (DGK) class I inhibitor (R59949) on lipid metabolism to validate the method. In human skeletal muscle cells, DGK inhibition impaired diacylglycerol (DAG) conversion to phosphatidic acid and increased triglyceride synthesis. In intact glycolytic mouse skeletal muscle, DGK inhibition triggered the accumulation of DAG species. Conversely, the DGK inhibitor did not affect DAG content in oxidative muscle. This simple assay detects rapid changes in the lipid species composition of skeletal muscle with high sensitivity and specificity. Determination of lipid metabolism in skeletal muscle may further elucidate the mechanisms contributing to the pathogenesis of insulin resistance in type 2 diabetes or obesity.

  4. Evaluation of Two Lyophilized Molecular Assays to Rapidly Detect Foot-and-Mouth Disease Virus Directly from Clinical Samples in Field Settings.

    Science.gov (United States)

    Howson, E L A; Armson, B; Madi, M; Kasanga, C J; Kandusi, S; Sallu, R; Chepkwony, E; Siddle, A; Martin, P; Wood, J; Mioulet, V; King, D P; Lembo, T; Cleaveland, S; Fowler, V L

    2017-06-01

    Accurate, timely diagnosis is essential for the control, monitoring and eradication of foot-and-mouth disease (FMD). Clinical samples from suspect cases are normally tested at reference laboratories. However, transport of samples to these centralized facilities can be a lengthy process that can impose delays on critical decision making. These concerns have motivated work to evaluate simple-to-use technologies, including molecular-based diagnostic platforms, that can be deployed closer to suspect cases of FMD. In this context, FMD virus (FMDV)-specific reverse transcription loop-mediated isothermal amplification (RT-LAMP) and real-time RT-PCR (rRT-PCR) assays, compatible with simple sample preparation methods and in situ visualization, have been developed which share equivalent analytical sensitivity with laboratory-based rRT-PCR. However, the lack of robust 'ready-to-use kits' that utilize stabilized reagents limits the deployment of these tests into field settings. To address this gap, this study describes the performance of lyophilized rRT-PCR and RT-LAMP assays to detect FMDV. Both of these assays are compatible with the use of fluorescence to monitor amplification in real-time, and for the RT-LAMP assays end point detection could also be achieved using molecular lateral flow devices. Lyophilization of reagents did not adversely affect the performance of the assays. Importantly, when these assays were deployed into challenging laboratory and field settings within East Africa they proved to be reliable in their ability to detect FMDV in a range of clinical samples from acutely infected as well as convalescent cattle. These data support the use of highly sensitive molecular assays into field settings for simple and rapid detection of FMDV. © 2015 The Authors. Transboundary and Emerging Diseases Published by Blackwell Verlag GmbH.

  5. In Vivo Selective Capture and Rapid Identification of Luteolin and Its Metabolites in Rat Livers by Molecularly Imprinted Solid-Phase Microextraction.

    Science.gov (United States)

    Gao, Die; Wang, Dan-Dan; Zhang, Qian; Yang, Feng-Qing; Xia, Zhi-Ning; Zhang, Qi-Hui; Yuan, Chun-Su

    2017-02-15

    A method based on molecularly imprinted solid-phase microextraction (MIP-SPME) coupled with liquid chromatography-quadrupole time-of-flight tandem mass spectrometry (QTOF-MS/MS) was developed for the detection of luteolin and its metabolites in vivo. The MIP-SPME fibers were first fabricated by dopamine and silane, and then luteolin MIPs-coated fibers were successfully prepared using luteolin, acrylamide (AM), and ethylene glycol dimethacrylate (EGDMA) as the template, functional monomer and cross-linker, respectively. The characterizations of polymers were analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and the Brunauer-Emmett-Teller method (BET). The properties involving adsorption and selective experiments were evaluated, and these results revealed that MIP fibers presented high adsorption capacity and selectivity to luteolin. Furthermore, the developed MIP-SPME coupled with the LC-QTOF-MS/MS method was adopted to capture and identify luteolin and its metabolites in rat livers in vivo, and eventually, apigenin, chrysoeriol, and diosmetin were rapidly identified as metabolites.

  6. Development of molecularly imprinted column-on line-two dimensional liquid chromatography for rapidly and selectively monitoring estradiol in cosmetics.

    Science.gov (United States)

    Guo, Pengqi; Xu, Xinya; Xian, Liang; Ge, Yanhui; Luo, Zhimin; Du, Wei; Jing, Wanghui; Zeng, Aiguo; Chang, Chun; Fu, Qiang

    2016-12-01

    Nowadays, the illegal use of estradiol in cosmetics has caused a series of events which endangering public health seriously. Therefore, it is imperative to establish a simple, fast and specific method for monitoring the illegal use of estradiol in cosmetics. In current study, we developed a molecular imprinted monolithic column two dimensional liquid chromatography method (MIMC-2D-LC) for rapid and selective determination of estradiol in various cosmetic samples. The best polymerization, morphology, structure property, surface groups, and the adsorption performance of the prepared material were investigated. The MIMC-2D-LC was validated and successfully used for detecting estradiol in cosmetic samples with good selectivity, sensitivity, efficiency and reproducibility. The linear range of the MIMC-2D-LC for estradiol was 0.5-50μgg -1 with the limit of detection of 0.08μgg -1 . Finally, six batches of cosmetic samples obtained from local markets were tested by the proposed method. The test results showed that the illegal use of estradiol still existed in the commercially available samples. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. A new rapid method for Clostridium difficile DNA extraction and detection in stool: toward point-of-care diagnostic testing

    National Research Council Canada - National Science Library

    Freifeld, Alison G; Simonsen, Kari A; Booth, Christine S; Zhao, Xing; Whitney, Scott E; Karre, Teresa; Iwen, Peter C; Viljoen, Hendrik J

    2012-01-01

    We describe a new method for the rapid diagnosis of Clostridium difficile infection, with stool sample preparation and DNA extraction by heat and physical disruption in a single-use lysis microreactor (LMR...

  8. A novel method for ATLAS FSI alignment based on rapid, direct phase monitoring

    CERN Document Server

    Gibson, S M; The ATLAS collaboration; Horton, K; Lewis, A; Liang, Z; Livermore, S; Mattravers, C; Nickerson, R B

    2010-01-01

    Frequency Scanning Interferometry is a precise, multiple distance measurement technique, originally developed for ATLAS, which is suited to a variety of applications in the survey and alignment of future accelerators and particle detectors. The ATLAS inner detector is instrumented with an automated FSI alignment system, capable of simultaneously measuring hundreds of interferometers within the operational particle tracker. The alignment system began data taking in 2008 and we present the latest results from the on-detector system during LHC running. A new method has been developed based on rapid, direct monitoring of the interferometer phase, which allows the measurement of short term motions with improved precision, at a fraction of the wavelength of light (typically sensitive to < 50 nm). We outline the theory behind this novel technique and demonstrate precise measurements from ATLAS, which reveal interesting micron-level movements of the inner detector, correlated with thermal cycles and magnetic f...

  9. Apparatus and method for rapid cooling of large area substrates in vacuum

    Science.gov (United States)

    Barth, Kurt L.; Enzenroth, Robert A.; Sampath, Walajabad S.

    2010-09-28

    The present invention is directed to an apparatus and method for rapid cooling of a large substrate in a vacuum environment. A first cooled plate is brought into close proximity with one surface of a flat substrate. The spatial volume between the first cooling plate and the substrate is sealed and brought to a higher pressure than the surrounding vacuum level to increase the cooling efficiency. A second cooled plate is brought into close proximity with the opposite surface of the flat substrate. A second spatial volume between the second cooling plate and the substrate is sealed and the gas pressure is equalized to the gas pressure in the first spatial volume. The equalization of the gas pressure on both sides of the flat substrate eliminates deflection of the substrate and bending stress in the substrate.

  10. A rapid and economic in-house DNA purification method using glass syringe filters.

    Directory of Open Access Journals (Sweden)

    Yun-Cheol Kim

    Full Text Available BACKGROUND: Purity, yield, speed and cost are important considerations in plasmid purification, but it is difficult to achieve all of these at the same time. Currently, there are many protocols and kits for DNA purification, however none maximize all four considerations. METHODOLOGY/PRINCIPAL FINDINGS: We now describe a fast, efficient and economic in-house protocol for plasmid preparation using glass syringe filters. Plasmid yield and quality as determined by enzyme digestion and transfection efficiency were equivalent to the expensive commercial kits. Importantly, the time required for purification was much less than that required using a commercial kit. CONCLUSIONS/SIGNIFICANCE: This method provides DNA yield and quality similar to that obtained with commercial kits, but is more rapid and less costly.

  11. A robust and rapid method of producing soluble, stable, and functional G-protein coupled receptors.

    Directory of Open Access Journals (Sweden)

    Karolina Corin

    Full Text Available Membrane proteins, particularly G-protein coupled receptors (GPCRs, are notoriously difficult to express. Using commercial E. coli cell-free systems with the detergent Brij-35, we could rapidly produce milligram quantities of 13 unique GPCRs. Immunoaffinity purification yielded receptors at >90% purity. Secondary structure analysis using circular dichroism indicated that the purified receptors were properly folded. Microscale thermophoresis, a novel label-free and surface-free detection technique that uses thermal gradients, showed that these receptors bound their ligands. The secondary structure and ligand-binding results from cell-free produced proteins were comparable to those expressed and purified from HEK293 cells. Our study demonstrates that cell-free protein production using commercially available kits and optimal detergents is a robust technology that can be used to produce sufficient GPCRs for biochemical, structural, and functional analyses. This robust and simple method may further stimulate others to study the structure and function of membrane proteins.

  12. Rapid method for surveying CO concentrations in high-rise buildings

    Energy Technology Data Exchange (ETDEWEB)

    Flachsbart, P.G.; Ott, W.R.

    1986-01-01

    A rapid method for employing personal exposure monitors (PEMs) to measure carbon monoxide (CO) concentrations in high-rise buildings is described. The purpose is to determine whether or not a CO problem exists in a building, and, if so, what corrective actions should be taken. The methodology was applied to a 15-story building in Palo Alto, CA, where elevated CO concentrations were discovered on the first 11 floors. The source appeared to be an underground parking garage. A follow-up survey four years later revealed that mitigative measures designed to reduce these concentrations had been successful. The survey methodology is inexpensive and can be applied to a number of buildings in a city.

  13. Evaluation of rapid alternative methods for drug susceptibility testing in clinical isolates of Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Luciano Mengatto

    2006-08-01

    Full Text Available A study was carried out to compare the performance of a commercial method (MGIT and four inexpensive drug susceptibility methods: nitrate reductase assay (NRA, microscopic observation drug susceptibility (MODS assay, MTT test, and broth microdilution method (BMM. A total of 64 clinical isolates of Mycobacterium tuberculosis were studied. The Lowenstein-Jensen proportion method (PM was used as gold standard. MGIT, NRA, MODS, and MTT results were available on an average of less than 10 days, whereas BMM results could be reported in about 20 days. Most of the evaluated tests showed excellent performance for isoniazid and rifampicin, with sensitivity and specificity values > 90%. With most of the assays, sensitivity for ethambutol was low (62-87% whereas for streptomycin, sensitivity values ranged from 84 to 100%; NRA-discrepancies were associated with cultures with a low proportion of EMB-resistant organisms while most discrepancies with quantitative tests (MMT and BMM were seen with isolates whose minimal inhibitory concentrations fell close the cutoff. MGIT is reliable but still expensive. NRA is the most inexpensive and easiest method to perform without changing the organization of the routine PM laboratory performance. While MODS, MTT, and BMM, have the disadvantage from the point of view of biosafety, they offer the possibility of detecting partial resistant strains. This study shows a very good level of agreement of the four low-cost methods compared to the PM for rapid detection of isoniazid, rifampicin and streptomycin resistance (Kappa values > 0.8; more standardization is needed for ethambutol.

  14. A rapid and efficient method for assessing pathogenicity of ustilago maydis on maize and teosinte lines.

    Science.gov (United States)

    Chavan, Suchitra; Smith, Shavannor M

    2014-01-03

    Maize is a major cereal crop worldwide. However, susceptibility to biotrophic pathogens is the primary constraint to increasing productivity. U. maydis is a biotrophic fungal pathogen and the causal agent of corn smut on maize. This disease is responsible for significant yield losses of approximately $1.0 billion annually in the U.S.(1) Several methods including crop rotation, fungicide application and seed treatments are currently used to control corn smut(2). However, host resistance is the only practical method for managing corn smut. Identification of crop plants including maize, wheat, and rice that are resistant to various biotrophic pathogens has significantly decreased yield losses annually(3-5). Therefore, the use of a pathogen inoculation method that efficiently and reproducibly delivers the pathogen in between the plant leaves, would facilitate the rapid identification of maize lines that are resistant to U. maydis. As, a first step toward indentifying maize lines that are resistant to U. maydis, a needle injection inoculation method and a resistance reaction screening method was utilized to inoculate maize, teosinte, and maize x teosinte introgression lines with a U. maydis strain and to select resistant plants. Maize, teosinte and maize x teosinte introgression lines, consisting of about 700 plants, were planted, inoculated with a strain of U. maydis, and screened for resistance. The inoculation and screening methods successfully identified three teosinte lines resistant to U. maydis. Here a detailed needle injection inoculation and resistance reaction screening protocol for maize, teosinte, and maize x teosinte introgression lines is presented. This study demonstrates that needle injection inoculation is an invaluable tool in agriculture that can efficiently deliver U. maydis in between the plant leaves and has provided plant lines that are resistant to U. maydis that can now be combined and tested in breeding programs for improved disease resistance.

  15. Concordance and discordance of sequence survey methods for molecular epidemiology

    Directory of Open Access Journals (Sweden)

    Eduardo Castro-Nallar

    2015-02-01

    Full Text Available The post-genomic era is characterized by the direct acquisition and analysis of genomic data with many applications, including the enhancement of the understanding of microbial epidemiology and pathology. However, there are a number of molecular approaches to survey pathogen diversity, and the impact of these different approaches on parameter estimation and inference are not entirely clear. We sequenced whole genomes of bacterial pathogens, Burkholderia pseudomallei, Yersinia pestis, and Brucella spp. (60 new genomes, and combined them with 55 genomes from GenBank to address how different molecular survey approaches (whole genomes, SNPs, and MLST impact downstream inferences on molecular evolutionary parameters, evolutionary relationships, and trait character associations. We selected isolates for sequencing to represent temporal, geographic origin, and host range variability. We found that substitution rate estimates vary widely among approaches, and that SNP and genomic datasets yielded different but strongly supported phylogenies. MLST yielded poorly supported phylogenies, especially in our low diversity dataset, i.e., Y. pestis. Trait associations showed that B. pseudomallei and Y. pestis phylogenies are significantly associated with geography, irrespective of the molecular survey approach used, while Brucella spp. phylogeny appears to be strongly associated with geography and host origin. We contrast inferences made among monomorphic (clonal and non-monomorphic bacteria, and between intra- and inter-specific datasets. We also discuss our results in light of underlying assumptions of different approaches.

  16. Fragrance analysis using molecular and biochemical methods in ...

    African Journals Online (AJOL)

    admin

    Mantel test of significance detected by biochemical analysis of RILs (with 1.7% KOH) and molecular marker study revealed high degree (>90%) of association of aroma with the above mentioned markers, respectively. Some of the F10 lines amplified the heterozygous alleles for two sets of specific markers (BAD2 and.

  17. A stochastic quasi Newton method for molecular simulations

    NARCIS (Netherlands)

    Chau, Chun Dong

    2010-01-01

    In this thesis the Langevin equation with a space-dependent alternative mobility matrix has been considered. Simulations of a complex molecular system with many different length and time scales based on the fundamental equations of motion take a very long simulation time before capturing the

  18. A method for rapid measurement of laser ablation rate of hard dental tissue

    Science.gov (United States)

    Perhavec, T.; Gorkič, A.; Bračun, D.; Diaci, J.

    2009-06-01

    The aim of the study reported here is the development of a new method which allows rapid and accurate in-vitro measurements of three-dimensional (3D) shape of laser ablated craters in hard dental tissues and the determination of crater volume, ablation rate and speed. The method is based on the optical triangulation principle. A laser sheet projector illuminates the surface of a tooth, mounted on a linear translation stage. As the tooth is moved by the translation stage a fast digital video camera captures series of images of the illuminated surface. The images are analyzed to determine a 3D model of the surface. Custom software is employed to analyze the 3D model and to determine the volume of the ablated craters. Key characteristics of the method are discussed as well as some practical aspects pertinent to its use. The method has been employed in an in-vitro study to examine the ablation rates and speeds of the two main laser types currently employed in dentistry, Er:YAG and Er,Cr:YSGG. Ten samples of extracted human molar teeth were irradiated with laser pulse energies from 80 mJ to the maximum available energy (970 mJ with the Er:YAG, and 260 mJ with the Er,Cr:YSGG). About 2000 images of each ablated tooth surface have been acquired along a translation range of 10 mm, taking about 10 s and providing close to 1 million surface measurement points. Volumes of 170 ablated craters (half of them in dentine and the other half in enamel) were determined from this data and used to examine the ablated volume per pulse energy and ablation speed. The results show that, under the same conditions, the ablated volume per pulse energy achieved by the Er:YAG laser exceeds that of the Er,Cr:YSGG laser in almost all regimes for dentine and enamel. The maximum Er:YAG laser ablation speeds (1.2 mm 3/s in dentine and 0.7 mm 3/s in enamel) exceed those obtained by the Er,Cr:YSGG laser (0.39 mm 3/s in dentine and 0.12 mm 3/s in enamel). Since the presented method proves to be easy to

  19. Rapid, convenient method for screening imidazole-containing compounds for heme oxygenase inhibition.

    Science.gov (United States)

    Vlahakis, Jason Z; Rahman, Mona N; Roman, Gheorghe; Jia, Zongchao; Nakatsu, Kanji; Szarek, Walter A

    2011-01-01

    Sensitive assays for measuring heme oxygenase activity have been based on the gas-chromatographic detection of carbon monoxide using elaborate, expensive equipment. The present study describes a rapid and convenient method for screening imidazole-containing candidates for inhibitory activity against heme oxygenase using a plate reader, based on the spectroscopic evaluation of heme degradation. A PowerWave XS plate reader was used to monitor the absorbance (as a function of time) of heme bound to purified truncated human heme oxygenase-1 (hHO-1) in the individual wells of a standard 96-well plate (with or without the addition of a test compound). The degradation of heme by heme oxygenase-1 was initiated using l-ascorbic acid, and the collected relevant absorbance data were analyzed by three different methods to calculate the percent control activity occurring in wells containing test compounds relative to that occurring in control wells with no test compound present. In the cases of wells containing inhibitory compounds, significant shifts in λ(max) from 404 to near 412 nm were observed as well as a decrease in the rate of heme degradation relative to that of the control. Each of the three methods of data processing (overall percent drop in absorbance over 1.5h, initial rate of reaction determined over the first 5 min, and estimated pseudo first-order reaction rate constant determined over 1.5h) gave similar and reproducible results for percent control activity. The fastest and easiest method of data analysis was determined to be that using initial rates, involving data acquisition for only 5 min once reactions have been initiated using l-ascorbic acid. The results of the study demonstrate that this simple assay based on the spectroscopic detection of heme represents a rapid, convenient method to determine the relative inhibitory activity of candidate compounds, and is useful in quickly screening a series or library of compounds for heme oxygenase inhibition

  20. A rapid method of fruit cell isolation for cell size and shape measurements

    Directory of Open Access Journals (Sweden)

    Johnston Jason W

    2009-04-01

    Full Text Available Abstract Background Cell size is a structural component of fleshy fruit, contributing to important traits such as fruit size and texture. There are currently a number of methods for measuring cell size; most rely either on tissue sectioning or digestion of the tissue with cell wall degrading enzymes or chemicals to release single cells. Neither of these approaches is ideal for assaying large fruit numbers as both require a considerable time to prepare the tissue, with current methods of cell wall digestions taking 24 to 48 hours. Additionally, sectioning can lead to a measurement of a plane that does not represent the widest point of the cell. Results To develop a more rapid way of measuring fruit cell size we have developed a protocol that solubilises pectin in the middle lamella of the plant cell wall releasing single cells into a buffered solution. Gently boiling small fruit samples in a 0.05 M Na2CO3 solution, osmotically balanced with 0.3 M mannitol, produced good cell separation with little cellular damage in less than 30 minutes. The advantage of combining a chemical treatment with boiling is that the cells are rapidly killed. This stopped cell shape changes that could potentially occur during separation. With this method both the rounded and angular cells of the apple cultivars SciRos 'Pacific Rose' and SciFresh 'Jazz'™ were observed in the separated cells. Using this technique, an in-depth analysis was performed measuring cell size from 5 different apple cultivars. Cell size was measured using the public domain ImageJ software. For each cultivar a minimum of 1000 cells were measured and it was found that each cultivar displayed a different distribution of cell size. Cell size within cultivars was similar and there was no correlation between flesh firmness and cell size. This protocol was tested on tissue from other fleshy fruit including tomato, rock melon and kiwifruit. It was found that good cell separation was achieved with flesh

  1. Use of predictive models and rapid methods to nowcast bacteria levels at coastal beaches

    Science.gov (United States)

    Francy, Donna S.

    2009-01-01

    The need for rapid assessments of recreational water quality to better protect public health is well accepted throughout the research and regulatory communities. Rapid analytical methods, such as quantitative polymerase chain reaction (qPCR) and immunomagnetic separation/adenosine triphosphate (ATP) analysis, are being tested but are not yet ready for widespread use.Another solution is the use of predictive models, wherein variable(s) that are easily and quickly measured are surrogates for concentrations of fecal-indicator bacteria. Rainfall-based alerts, the simplest type of model, have been used by several communities for a number of years. Deterministic models use mathematical representations of the processes that affect bacteria concentrations; this type of model is being used for beach-closure decisions at one location in the USA. Multivariable statistical models are being developed and tested in many areas of the USA; however, they are only used in three areas of the Great Lakes to aid in notifications of beach advisories or closings. These “operational” statistical models can result in more accurate assessments of recreational water quality than use of the previous day's Escherichia coli (E. coli)concentration as determined by traditional culture methods. The Ohio Nowcast, at Huntington Beach, Bay Village, Ohio, is described in this paper as an example of an operational statistical model. Because predictive modeling is a dynamic process, water-resource managers continue to collect additional data to improve the predictive ability of the nowcast and expand the nowcast to other Ohio beaches and a recreational river. Although predictive models have been shown to work well at some beaches and are becoming more widely accepted, implementation in many areas is limited by funding, lack of coordinated technical leadership, and lack of supporting epidemiological data.

  2. Rapid radiometric methods to detect and differentiate Mycobacterium tuberculosis/M. bovis from other mycobacterial species

    Energy Technology Data Exchange (ETDEWEB)

    Siddiqi, S.H.; Hwangbo, C.C.; Silcox, V.; Good, R.C.; Snider, D.E. Jr.; Middlebrook, G.

    1984-10-01

    Rapid methods for the differentiation of Mycobacterium tuberculosis/M. bovis (TB complex) from other mycobacteria (MOTT bacilli) were developed and evaluated in a three-phase study. In the first phase, techniques for identification of Mycobacterium species were developed by using radiometric technology and BACTEC Middlebrook 7H12 liquid medium. Based on /sup 14/CO/sub 2/ evolution, characteristic growth patterns were established for 13 commonly encountered mycobacterial species. Mycobacteria belonging to the TB complex were differentiated from other mycobacteria by cellular morphology and rate of /sup 14/CO/sub 2/ evolution. For further differentiation, radiometric tests for niacin production and inhibition by Q-nitro-alpha-acetyl amino-beta-hydroxy-propiophenone (NAP) were developed. In the second phase, 100 coded specimens on Lowenstein-Jensen medium were identified as members of the TB complex, MOTT bacilli, bacteria other than mycobacteria, or ''no viable organisms'' within 3 to 12 (average 6.4) days of receipt from the Centers for Disease Control. Isolation and identification of mycobacteria from 20 simulated sputum specimens were carried out in phase III. Out of 20 sputum specimens, 16 contained culturable mycobacteria, and all of the positives were detected by the BACTEC method in an average of 7.3 days. The positive mycobacterial cultures were isolated and identified as TB complex or MOTT bacilli in an average of 12.8 days. The radiometric NAP test was found to be highly sensitive and specific for a rapid identification of TB complex, whereas the radiometric niacin test was found to have some inherent problems. Radiometric BACTEC and conventional methodologies were in complete agreement in Phase II as well as in Phase III.

  3. Rapid identification of molecular changes in tulsi (Ocimum sanctum Linn) upon ageing using leaf spray ionization mass spectrometry.

    Science.gov (United States)

    Sarkar, Depanjan; Srimany, Amitava; Pradeep, T

    2012-10-07

    Tulsi or Holy Basil (Ocimum sanctum Linn) is a medicinally important plant. Ursolic acid (UA) and oleanolic acid (OA) are among its major constituents which account for many medicinal activities of the plant. In the present work, we deployed a new ambient ionization method, leaf spray ionization, for rapid detection of UA, OA and their oxidation products from tulsi leaves. Tandem electrospray ionization mass spectrometry (ESI-MS) has been performed on tulsi leaf extracts in methanol to establish the identity of the compounds. We probed changes occurring in the relative amounts of the parent compounds (UA and OA) with their oxidized products and the latter show an increasing trend upon ageing. The findings are verified by ESI-MS analysis of tulsi leaf extracts, which shows the same trend proving the reliability of the leaf spray method.

  4. A rapid minor groove binder PCR method for distinguishing the vaccine strain Brucella abortus 104M.

    Science.gov (United States)

    Nan, Wenlong; Qin, Lide; Wang, Yong; Zhang, Yueyong; Tan, Pengfei; Chen, Yuqi; Mao, Kairong; Chen, Yiping

    2018-01-24

    Brucellosis is a widespread zoonotic disease caused by Gram-negative Brucella bacteria. Immunisation with attenuated vaccine is an effective method of prevention, but it can interfere with diagnosis. Live, attenuated Brucella abortus strain 104M has been used for the prevention of human brucellosis in China since 1965. However, at present, no fast and reliable method exists that can distinguish this strain from field strains. Single nucleotide polymorphism (SNP)-based assays offer a new approach for such discrimination. SNP-based minor groove binder (MGB) and Cycleave assays have been used for rapid identification of four Brucella vaccine strains (B. abortus strains S19, A19 and RB51, and B. melitensis Rev1). The main objective of this study was to develop a PCR assay for rapid and specific detection of strain 104M. We developed a SNP-based MGB PCR assay that could successfully distinguish strain 104M from 18 representative strains of Brucella (B. abortus biovars 1, 2, 3, 4, 5, 6, 7 and 9, B. melitensis biovars 1, 2 and 3, B. suis biovars 1, 2, 3 and 4, B. canis, B. neotomae, and B. ovis), four Brucella vaccine strains (A19, S19, S2, M5), and 55 Brucella clinical field strains. The assay gave a negative reaction with four non-Brucella species (Escherichia coli, Pasteurella multocida, Streptococcus suis and Pseudomonas aeruginosa). The minimum sensitivity of the assay, evaluated using 10-fold dilutions of chromosomal DNA, was 220 fg for the 104M strain and 76 fg for the single non-104M Brucella strain tested (B. abortus A19). The assay was also reproducible (intra- and inter-assay coefficients of variation = 0.006-0.022 and 0.012-0.044, respectively). A SNP-based MGB PCR assay was developed that could straightforwardly and unambiguously distinguish B. abortus vaccine strain 104M from non-104M Brucella strains. Compared to the classical isolation and identification approaches of bacteriology, this real-time PCR assay has substantial advantages in terms of

  5. A Method for Rapid Measurement of Contrast Sensitivity on Mobile Touch-Screens

    Science.gov (United States)

    Mulligan, Jeffrey B.

    2016-01-01

    Touch-screen displays in cell phones and tablet computers are now pervasive, making them an attractive option for vision testing outside of the laboratory or clinic. Here we de- scribe a novel method in which subjects use a finger swipe to indicate the transition from visible to invisible on a grating which is swept in both contrast and frequency. Because a single image can be swiped in about a second, it is practical to use a series of images to zoom in on particular ranges of contrast or frequency, both to increase the accuracy of the measurements and to obtain an estimate of the reliability of the subject. Sensitivities to chromatic and spatio-temporal modulations are easily measured using the same method. A proto- type has been developed for Apple Computer's iPad/iPod/iPhone family of devices, implemented using an open-source scripting environment known as QuIP (QUick Image Processing, http://hsi.arc.nasa.gov/groups/scanpath/research.php). Preliminary data show good agreement with estimates obtained from traditional psychophysical methods as well as newer rapid estimation techniques. Issues relating to device calibration are also discussed.

  6. Modified agar dilution method for rapid antibiotic susceptibility testing of anaerobic bacteria.

    Science.gov (United States)

    Hanson, C W; Martin, W J

    1978-01-01

    A simplified method has been developed for agar dilution antimicrobial susceptibility testing of anaerobic bacteria, designed to economize on time and money when only a few isolates need to be tested. The procedure is based on the principle of using filter paper disks as carriers of the antibiotic and 35- by 10-mm petri dishes which, when inoculated with the Steers replicator, can test up to four organisms per plate. The procedure was run in parallel with conventional agar dilution techniques and showed 95% agreement to within one dilution for all minimal inhibitory concentrations recorded on fresh anaerobic isolates from clinical specimens. The technique was further simplified by using commercially available antibiotic-containing disks, thereby alleviating the tedious and time-consuming procedure of preparing the disks. The data indicated that 48- to 72-h diffusion periods were sufficient to achieve a uniform concentration of the antibiotic in the petri plate and that the antibiotics were stable at room temperature for that period of time. In terms of applicability and relevance to the needs of the clinical microbiology laboratory, the modified agar dilution method for rapid antimicrobial susceptibility testing of individual anaerobic isolates was found to be superior to the broth dilution method since it was easier to read and required considerably less set up time. PMID:400819

  7. Rapid, high-temperature, field test method for evaluation of geothermal calcium carbonate scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, R.G.

    1986-09-01

    A new test method is described that allows the rapid field testing of calcium carbonate scale inhibitors at 500/sup 0/F (260/sup 0/C). The method evolved from use of a full-flow test loop on a well with a mass flow rate of about 1 x 10/sup 6/ lbm/hr (126 kg/s). It is a simple, effective way to evaluate the effectiveness of inhibitors under field conditions. Five commercial formulations were chosen for field evaluation on the basis of nonflowing, laboratory screening tests at 500/sup 0/F (260/sup 0/C). Four of these formulations from different suppliers controlled calcium carbonate scale deposition as measured by the test method. Two of these could dislodge recently deposited scale that had not age-hardened. Performance-profile diagrams, which were measured for these four effective inhibitors, show the concentration interrelationship between brine calcium and inhibitor concentrations at which the formulations will and will not stop scale formation in the test apparatus. With these diagrams, one formulation was chosen for testing on the full-flow brine line. The composition was tested for 6 weeks and showed a dramatic decrease in the scaling occurring at the flow-control valve. This scaling was about to force a shutdown of a major, long-term flow test being done for reservoir economic evaluations. The inhibitor stopped the scaling, and the test was performed without interruption.

  8. A simple and rapid cultural method for detection of Enterobacter sakazakii in environmental samples.

    Science.gov (United States)

    Guillaume-Gentil, O; Sonnard, V; Kandhai, M C; Marugg, J D; Joosten, H

    2005-01-01

    A method was developed to detect and identify Enterobacter sakazakii in environmental samples. The method is based on selective enrichment at 45+/-0.5 degrees C in lauryl sulfate tryptose broth supplemented with 0.5 M NaCl and 10 mg/liter vancomycin (mLST) for 22 to 24 h followed by streaking on tryptone soy agar with bile salts. When exposed to light during incubation at 37 degrees C, E. sakazakii produces yellow colonies within 24 h; identification was confirmed by testing for alpha-glucosidase activity and by using API 20E strips. All of the E. sakazakii strains tested (n = 99) were able to grow in mLST at 45+/-0.5 degrees C, whereas 35 of 39 strains of potential competitors, all belonging to the Enterobacteriaceae, were suppressed. A survey was carried out with 192 environmental samples from four different milk powder factories. Using this new protocol, E. sakazakii was isolated from almost 40% of the samples, whereas the reference procedure (enrichment in buffered peptone water, isolation on violet red bile glucose agar, and biochemical identification of randomly chosen colonies) only yielded 26% positive results. This selective method can be very useful for the rapid and reliable detection of E. sakazakii in environmental samples.

  9. Rapid, Simple, and Sensitive Spectrofluorimetric Method for the Estimation of Ganciclovir in Bulk and Pharmaceutical Formulations

    Directory of Open Access Journals (Sweden)

    Garima Balwani

    2013-01-01

    Full Text Available A new, simple, rapid, sensitive, accurate, and affordable spectrofluorimetric method was developed and validated for the estimation of ganciclovir in bulk as well as in marketed formulations. The method was based on measuring the native fluorescence of ganciclovir in 0.2 M hydrochloric acid buffer of pH 1.2 at 374 nm after excitation at 257 nm. The calibration graph was found to be rectilinear in the concentration range of 0.25–2.00 μg mL−1. The limit of quantification and limit of detection were found to be 0.029 μg mL−1 and 0.010 μg mL−1, respectively. The method was fully validated for various parameters according to ICH guidelines. The results demonstrated that the procedure is accurate, precise, and reproducible (relative standard deviation <2% and can be successfully applied for the determination of ganciclovir in its commercial capsules with average percentage recovery of 101.31 ± 0.90.

  10. Rapid Method for the Determination of the Stable Oxygen Isotope Ratio of Water in Alcoholic Beverages.

    Science.gov (United States)

    Wang, Daobing; Zhong, Qiding; Li, Guohui; Huang, Zhanbin

    2015-10-28

    This paper demonstrates the first successful application of an online pyrolysis technique for the direct determination of oxygen isotope ratios (δ(18)O) of water in alcoholic beverages. Similar water concentrations in each sample were achieved by adjustment with absolute ethyl alcohol, and then a fixed GC split ratio can be used. All of the organic ingredients were successfully separated from the analyte on a CP-PoraBond Q column and subsequently vented out, whereas water molecules were transferred into the reaction furnace and converted to CO. With the system presented, 15-30 μL of raw sample was diluted and can be analyzed repeatedly; the analytical precision was better than 0.4‰ (n = 5) in all cases, and more than 50 injections can be made per day. No apparent memory effect was observed even if water samples were injected using the same syringe; a strong correlation (R(2) = 0.9998) was found between the water δ(18)O of measured sample and that of working standards. There was no significant difference (p > 0.05) between the mean δ(18)O value and that obtained by the traditional method (CO2-water equilibration/isotope ratio mass spectrometry) and the newly developed method in this study. The advantages of this new method are its rapidity and straightforwardness, and less test portion is required.

  11. A Rapid and Sensitive Method to Measure the Functional Activity of Shiga Toxins in Human Serum

    Directory of Open Access Journals (Sweden)

    Valentina Arfilli

    2015-11-01

    Full Text Available Shiga toxins (Stx have a definite role in the development of hemolytic uremic syndrome in children with hemorrhagic colitis caused by pathogenic Stx-producing Escherichia coli (STEC strains. The dramatic effects of these toxins on the microvasculature of different organs, particularly of the kidney, are well known, whereas there is no consensus on the mechanism by which Stx reach the endothelia of target organs and/or indirectly injure these body sites. We hereby describe a quick (4 h, radioactive, Raji cell-based method designed for the detection of Stx in human sera. The assay monitors the translation impairment induced by these powerful inhibitors of protein synthesis, which are identified properly by neutralizing their activity with specific monoclonal antibodies. By this method, we detected for the first time the functional activity of Stx in sera of STEC-infected patients during hemorrhagic colitis. Recent research has pointed to a dynamic process of Stx-induced renal intoxication in which concurrent and interactive steps are involved. Our rapid and specific method could be useful for studying the kinetics of Stx during the natural course of STEC infection and the interplay between Stx activity in serum and Stx presence in different blood fractions (neutrophils, monocytes, platelets, leukocyte-platelet aggregates, microvesicles, lipoproteins.

  12. FLASH: A rapid method for prototyping paper-based microfluidic devices‡

    Science.gov (United States)

    Martinez, Andres W.; Phillips, Scott T.; Wiley, Benjamin J.; Gupta, Malancha

    2011-01-01

    This article describes FLASH (Fast Lithographic Activation of Sheets), a rapid method for laboratory prototyping of microfluidic devices in paper. Paper-based microfluidic devices are emerging as a new technology for applications in diagnostics for the developing world, where low cost and simplicity are essential. FLASH is based on photolithography, but requires only a UV lamp and a hotplate; no clean-room or special facilities are required (FLASH patterning can even be performed in sunlight if a UV lamp and hotplate are unavailable). The method provides channels in paper with dimensions as small as 200 μm in width and 70 μm in height; the height is defined by the thickness of the paper. Photomasks for patterning paper-based microfluidic devices can be printed using an ink-jet printer or photocopier, or drawn by hand using a waterproof black pen. FLASH provides a straightforward method for prototyping paper-based microfluidic devices in regions where the technological support for conventional photolithography is not available. PMID:19023478

  13. AO–MW–PLS method applied to rapid quantification of teicoplanin with near-infrared spectroscopy

    Directory of Open Access Journals (Sweden)

    Jiemei Chen

    2017-01-01

    Full Text Available Teicoplanin (TCP is an important lipoglycopeptide antibiotic produced by fermenting Actinoplanes teichomyceticus. The change in TCP concentration is important to measure in the fermentation process. In this study, a reagent-free and rapid quantification method for TCP in the TCP–Tris–HCl mixture samples was developed using near-infrared (NIR spectroscopy by focusing our attention on the fermentation process for TCP. The absorbance optimization (AO partial least squares (PLS was proposed and integrated with the moving window (MW PLS, which is called AO–MW–PLS method, to select appropriate wavebands. A model set that includes various wavebands that were equivalent to the optimal AO–MW–PLS waveband was proposed based on statistical considerations. The public region of all equivalent wavebands was just one of the equivalent wavebands. The obtained public regions were 1540–1868nm for TCP and 1114–1310nm for Tris. The root-mean-square error and correlation coefficient for leave-one-out cross validation were 0.046mg mL−1 and 0.9998mg mL−1 for TCP, and 0.235mg mL−1 and 0.9986mg mL−1 for Tris, respectively. All the models achieved highly accurate prediction effects, and the selected wavebands provided valuable references for designing specialized spectrometers. This study provided a valuable reference for further application of the proposed methods to TCP fermentation broth and to other spectroscopic analysis fields.

  14. A simple electrochemical method for the rapid estimation of antioxidant potentials of some selected medicinal plants.

    Science.gov (United States)

    Amidi, Salimeh; Mojab, Faraz; Bayandori Moghaddam, Abdolmajid; Tabib, Kimia; Kobarfard, Farzad

    2012-01-01

    Clinical and Epidemiological studies have shown that a diet rich in fruits and vegetables is associated with a decreased risk of cardiovascular diseases, cancers and other related disorders. These beneficial health effects have been attributed in part to the presence of antioxidants in dietary plants. Therefore screening for antioxidant properties of plant extracts has been one of the interests of scientists in this field. Different screening methods have been reported for the evaluation of antioxidant properties of plant extracts in the literature. In the present research a rapid screening method has been introduced based on cyclic voltammetry for antioxidant screening of some selected medicinal plant extracts. CYCLIC VOLTAMMETRY OF METHANOLIC EXTRACTS OF SEVEN MEDICINAL PLANTS: Buxus hyrcana, Rumex crispus, Achillea millefolium, Zataria multiflora, Ginkgo biloba, Lippia citriodora and Heptaptera anisoptera was carried out at different scan rates. Based on the interpretation of voltammograms, Rumex crispus, Achillea millefolium and Ginkgo biloba showed higher antioxidant capability than the others while Lippia citriodora contained the highest amount of antioxidants. Cyclic voltammetry is expected to be a simple method for screening antioxidants and estimating the antioxidant activity of foods and medicinal plants.

  15. A Rapid and Sensitive Method to Measure the Functional Activity of Shiga Toxins in Human Serum

    Science.gov (United States)

    Arfilli, Valentina; Carnicelli, Domenica; Ardissino, Gianluigi; Torresani, Erminio; Scavia, Gaia; Brigotti, Maurizio

    2015-01-01

    Shiga toxins (Stx) have a definite role in the development of hemolytic uremic syndrome in children with hemorrhagic colitis caused by pathogenic Stx-producing Escherichia coli (STEC) strains. The dramatic effects of these toxins on the microvasculature of different organs, particularly of the kidney, are well known, whereas there is no consensus on the mechanism by which Stx reach the endothelia of target organs and/or indirectly injure these body sites. We hereby describe a quick (4 h), radioactive, Raji cell-based method designed for the detection of Stx in human sera. The assay monitors the translation impairment induced by these powerful inhibitors of protein synthesis, which are identified properly by neutralizing their activity with specific monoclonal antibodies. By this method, we detected for the first time the functional activity of Stx in sera of STEC-infected patients during hemorrhagic colitis. Recent research has pointed to a dynamic process of Stx-induced renal intoxication in which concurrent and interactive steps are involved. Our rapid and specific method could be useful for studying the kinetics of Stx during the natural course of STEC infection and the interplay between Stx activity in serum and Stx presence in different blood fractions (neutrophils, monocytes, platelets, leukocyte-platelet aggregates, microvesicles, lipoproteins). PMID:26556372

  16. Rapid and sensitive method for determination of withaferin-A in human plasma by HPLC.

    Science.gov (United States)

    Patial, Pankaj; Gota, Vikram

    2011-02-01

    To develop and validate a rapid and sensitive high-performance liquid chromatographic method for determination of withaferin-A in human plasma. Withaferin-A, the active molecule of a traditional Indian herb, has demonstrated several biological activities in preclinical models. A validated bioassay is not available for its pharmacokinetic evaluation. The chromatographic system used a reverse-phase C18 column with UV-visible detection at 225 nm. The mobile phase consisted of water and acetonitrile applied in a gradient flow. Withaferin-A was extracted by simple protein-precipitation technique. The calibration curve was linear in the concentration range of 0.05-1.6 µg/ml. The method has the desired sensitivity to detect the plasma concentration range of withaferin-A that is likely to show biological activity based on in vitro data. This is the first HPLC method ever described for the estimation of withaferin-A in human plasma which could be applied for pharmacokinetic studies.

  17. A molecular dynamics study on thin film liquid boiling characteristics under rapid linear boundary heating: Effect of liquid film thickness

    Science.gov (United States)

    Rabbi, Kazi Fazle; Tamim, Saiful Islam; Faisal, A. H. M.; Mukut, K. M.; Hasan, Mohammad Nasim

    2017-06-01

    This study is a molecular dynamics investigation of phase change phenomena i.e. boiling of thin liquid films subjected to rapid linear heating at the boundary. The purpose of this study is to understand the phase change heat transfer phenomena at nano scale level. In the simulation, a thin film of liquid argon over a platinum surface has been considered. The simulation domain herein is a three-phase system consisting of liquid and vapor argon atoms placed over a platinum wall. Initially the whole system is brought to an equilibrium state at 90 K and then the temperature of the bottom wall is increased to a higher temperature (250K) within a finite time interval. Four different liquid argon film thicknesses have been considered (3 nm, 4 nm, 5 nm and 6 nm) in this study. The boundary heating rate (40×109 K/s) is kept constant in all these cases. Variation in system temperature, pressure, net evaporation number, spatial number density of the argon region with time for different film thickness have been demonstrated and analyzed. The present study indicates that the pattern of phase transition may be significantly different (i.e. evaporation or explosive boiling) depending on the liquid film thickness. Among the four cases considered in the present study, explosive boiling has been observed only for the liquid films of 5nm and 6nm thickness, while for the other cases, evaporation take place.

  18. Electromolecular propulsion (EMP): a rapid, simple method for analyzing dyes used in microscopy.

    Science.gov (United States)

    Haber, N

    1998-03-01

    The electrokinetic molecular effect known as electromolecular propulsion (EMP) was used to examine a variety of commonly used dyes that are used as biological stains. The dyes were electrokinetically mobilized using several organic solvent mixtures on a variety of thin layer substrates. Analysis was completed in seconds to minutes. Nearly all dyes tested separated into multiple colored components. The solvents and substrates used were well suited for qualitatively analyzing a broad variety of hydrophilic and lipophilic colorants. Speed, resolving power and operational simplicity of this technique make it convenient for effectively "fingerprinting" for consistency in dye products. EMP may be broadly applied to study quality control of dyes and their stains. Components not ordinarily known to be present can be readily detected using this technology. EMP can complement or offer a versatile alternative to existing analytical methods.

  19. HybriFree: a robust and rapid method for the development of monoclonal antibodies from different host species.

    Science.gov (United States)

    Kivi, Gaily; Teesalu, Kaupo; Parik, Jüri; Kontkar, Elen; Ustav, Mart; Noodla, Liis; Ustav, Mart; Männik, Andres

    2016-01-08

    The production of recombinant monoclonal antibodies in mammalian cell culture is of high priority in research and medical fields. A critical step in this process is the isolation of the antigen-binding domain sequences of antibodies possessing the desired properties. Many different techniques have been described to achieve this goal, but all have shortcomings; most techniques have problems with robustness, are time-consuming and costly, or have complications in the transfer from isolation to production phase. Here, we report a novel HybriFree technology for the development of monoclonal antibodies from different species that is robust, rapid, inexpensive and flexible and can be used for the subsequent production of antibodies in mammalian cell factories. HybriFree technology is illustrated herein via detailed examples of isolating mouse, rabbit and chicken monoclonal antibody sequences from immunized animals. Starting from crude spleen samples, antigen capturing of specific B-cells is performed initially. cDNA of antibody variable domains is amplified from the captured cells and used a source material for simple and rapid restriction/ligation free cloning of expression vector library in order to produce scFv-Fc or intact IgG antibodies. The vectors can be directly used for screening purposes as well as for the subsequent production of the developed monoclonal antibodies in mammalian cell culture. The antibodies isolated by the method have been shown to be functional in different immunoassays, including ELISA, immunofluorescence and Western blot. In addition, we demonstrate that by using a modified method including a negative selection step, we can isolate specific antibodies targeting the desired epitope and eliminate antibodies directed to undesired off-targets. HybriFree can be used for the reliable development of monoclonal antibodies and their subsequent production in mammalian cells. This simple protocol requires neither the culturing of B-cells nor single

  20. Validation of a user-friendly and rapid method for quantifying iodine content of salt.

    Science.gov (United States)

    Rohner, Fabian; Garrett, Greg S; Laillou, Arnaud; Frey, Simone K; Mothes, Ralf; Schweigert, Florian J; Locatelli-Rossi, Lorenzo

    2012-12-01

    Despite considerable progress made in the past decade through salt iodization programs, over 2 billion people worldwide still have inadequate iodine intake, with devastating consequences for brain development and intellectual capacity. To optimize these programs with regard to salt iodine content, careful monitoring of salt iodine content is essential, but few methods are available to quantitatively measure iodine concentration in a simple, fast, and safe way. We have validated a newly developed device that quantitatively measures the content of potassium iodate in salt in a simple, safe, and rapid way. The linearity, determination and detection limit, and inter- and intra-assay variability of this colorimetric method were assessed and the method was compared with iodometric titration, using salt samples from several countries. Linearity of analysis ranged from 5 to 75 mg/kg iodine, with 1 mg/kg being the determination limit; the intra- and interassay imprecision was 0.9%, 0.5%, and 0.7% and 1.5%, 1.7%, and 2.5% for salt samples with iodine contents of 17, 30, and 55 mg/kg, respectively; the interoperator imprecision for the same samples was 1.2%, 4.9%, and 4.7%, respectively. Comparison with the iodometric method showed high agreement between the methods (R2 = 0.978; limits of agreement, -10.5 to 10.0 mg/kg). The device offers a field- and user-friendly solution to quantifying potassium iodate salt content reliably. For countries that use potassium iodide in salt iodization programs, further validation is required.

  1. Validity and feasibility of a satellite imagery-based method for rapid estimation of displaced populations

    Directory of Open Access Journals (Sweden)

    Checchi Francesco

    2013-01-01

    Full Text Available Abstract Background Estimating the size of forcibly displaced populations is key to documenting their plight and allocating sufficient resources to their assistance, but is often not done, particularly during the acute phase of displacement, due to methodological challenges and inaccessibility. In this study, we explored the potential use of very high resolution satellite imagery to remotely estimate forcibly displaced populations. Methods Our method consisted of multiplying (i manual counts of assumed residential structures on a satellite image and (ii estimates of the mean number of people per structure (structure occupancy obtained from publicly available reports. We computed population estimates for 11 sites in Bangladesh, Chad, Democratic Republic of Congo, Ethiopia, Haiti, Kenya and Mozambique (six refugee camps, three internally displaced persons’ camps and two urban neighbourhoods with a mixture of residents and displaced ranging in population from 1,969 to 90,547, and compared these to “gold standard” reference population figures from census or other robust methods. Results Structure counts by independent analysts were reasonably consistent. Between one and 11 occupancy reports were available per site and most of these reported people per household rather than per structure. The imagery-based method had a precision relative to reference population figures of Conclusions In settings with clearly distinguishable individual structures, the remote, imagery-based method had reasonable accuracy for the purposes of rapid estimation, was simple and quick to implement, and would likely perform better in more current application. However, it may have insurmountable limitations in settings featuring connected buildings or shelters, a complex pattern of roofs and multi-level buildings. Based on these results, we discuss possible ways forward for the method’s development.

  2. A method for rapid measurement of intrarenal and other tissue pressures.

    Science.gov (United States)

    SWANN, H G; MONTGOMERY, A V; DAVIS, J C; MICKLE, E R

    1950-12-01

    A rapid method for measuring tissue pressures has been designed. A pressure of 250 mm. Hg is imposed on a manometer. Then the system is allowed to discharge into a needle cannula inserted in the tissue. The manometer forces out fluid (about 10 c.mm.) until the pressure within it is the same as that within the tissue. Records of the pressure changes are made. Each observation takes about a minute. The method gives results that are closely comparable with other reports of tissue pressures. With this method, the pressure in the following organs of dogs was found to be: kidney, 26 mm. Hg, cerebral cortex, 0 to 5 mm., muscle, 1 to 10 mm., spleen, S to 16 mm., subcutaneous tissue, 0 to 3 mm., and liver -2 to 14 mm. The reliability of the method was tested on the kidneys of decerebrate dogs. Measurements were found to be the same within narrow limits over a period of an hour; they were the same when taken simultaneously in different regions of the same kidney or in opposite kidneys. They were independent of the volume of fluid forced into the tissue. Similar pressures were observed with 1 or 5 or 10 holes bored in the shaft of the cannulating needle. The intrarenal pressure was also measured by inserting a needle cannula into the tissue and then allowing the pressure to reach equilibrium passively with a manometer. This method gave similar results. The intrarenal pressure has now found to be the same when measured by three different technics.

  3. Improved Savitzky-Golay-method-based fluorescence subtraction algorithm for rapid recovery of Raman spectra.

    Science.gov (United States)

    Chen, Kun; Zhang, Hongyuan; Wei, Haoyun; Li, Yan

    2014-08-20

    In this paper, we propose an improved subtraction algorithm for rapid recovery of Raman spectra that can substantially reduce the computation time. This algorithm is based on an improved Savitzky-Golay (SG) iterative smoothing method, which involves two key novel approaches: (a) the use of the Gauss-Seidel method and (b) the introduction of a relaxation factor into the iterative procedure. By applying a novel successive relaxation (SG-SR) iterative method to the relaxation factor, additional improvement in the convergence speed over the standard Savitzky-Golay procedure is realized. The proposed improved algorithm (the RIA-SG-SR algorithm), which uses SG-SR-based iteration instead of Savitzky-Golay iteration, has been optimized and validated with a mathematically simulated Raman spectrum, as well as experimentally measured Raman spectra from non-biological and biological samples. The method results in a significant reduction in computing cost while yielding consistent rejection of fluorescence and noise for spectra with low signal-to-fluorescence ratios and varied baselines. In the simulation, RIA-SG-SR achieved 1 order of magnitude improvement in iteration number and 2 orders of magnitude improvement in computation time compared with the range-independent background-subtraction algorithm (RIA). Furthermore the computation time of the experimentally measured raw Raman spectrum processing from skin tissue decreased from 6.72 to 0.094 s. In general, the processing of the SG-SR method can be conducted within dozens of milliseconds, which can provide a real-time procedure in practical situations.

  4. A Rapid Method for Quantifying Viable Mycobacterium avium subsp. paratuberculosis in Cellular Infection Assays

    Science.gov (United States)

    Pooley, Hannah B.; de Silva, Kumudika; Purdie, Auriol C.; Begg, Douglas J.; Whittington, Richard J.

    2016-01-01

    ABSTRACT Determining the viability of bacteria is a key outcome of in vitro cellular infection assays. Currently, this is done by culture, which is problematic for fastidious slow-growing bacteria such as Mycobacterium avium subsp. paratuberculosis, where it can take up to 4 months to confirm growth. This study aimed to identify an assay that can rapidly quantify the number of viable M. avium subsp. paratuberculosis cells in a cellular sample. Three commercially available bacterial viability assays along with a modified liquid culture method coupled with high-throughput quantitative PCR growth detection were assessed. Criteria for assessment included the ability of each assay to differentiate live and dead M. avium subsp. paratuberculosis organisms and their accuracy at low bacterial concentrations. Using the culture-based method, M. avium subsp. paratuberculosis growth was reliably detected and quantified within 2 weeks. There was a strong linear association between the 2-week growth rate and the initial inoculum concentration. The number of viable M. avium subsp. paratuberculosis cells in an unknown sample was quantified based on the growth rate, by using growth standards. In contrast, none of the commercially available viability assays were suitable for use with samples from in vitro cellular infection assays. IMPORTANCE Rapid quantification of the viability of Mycobacterium avium subsp. paratuberculosis in samples from in vitro cellular infection assays is important, as it allows these assays to be carried out on a large scale. In vitro cellular infection assays can function as a preliminary screening tool, for vaccine development or antimicrobial screening, and also to extend findings derived from experimental animal trials. Currently, by using culture, it takes up to 4 months to obtain quantifiable results regarding M. avium subsp. paratuberculosis viability after an in vitro infection assay; however, with the quantitative PCR and liquid culture method

  5. Geometry optimization of zirconium sulfophenylphosphonate layers by molecular simulation methods

    Czech Academy of Sciences Publication Activity Database

    Škoda, J.; Pospíšil, M.; Kovář, P.; Melánová, Klára; Svoboda, J.; Beneš, L.; Zima, Vítězslav

    2018-01-01

    Roč. 24, č. 1 (2018), s. 1-12, č. článku 10. ISSN 1610-2940 R&D Projects: GA ČR(CZ) GA14-13368S; GA ČR(CZ) GA17-10639S Institutional support: RVO:61389013 Keywords : zirconium sulfophenylphosphonate * intercalation * molecular simulation Subject RIV: CA - Inorganic Chemistry OBOR OECD: Inorganic and nuclear chemistry Impact factor: 1.425, year: 2016

  6. [DNA extraction methods of compost for molecular ecology analysis].

    Science.gov (United States)

    Yang, Zhao-Hui; Xiao, Yong; Zeng, Guang-Ming; Liu, Yun-Guo; Deng, Jiu-Hua

    2006-08-01

    Molecular ecology provides new techniques for studying compost microbes, and the DNA extraction is the basis of molecular techniques. Because of the contamination of humic acids, it turns to be more difficult for compost microbial DNA extraction. Three different approaches, named as lysozyme lysis, ultrasonic lysis and proteinase K lysis with CTAB, were used to extract the total DNA from compost. The detection performed on a nucleic acids and protein analyzer showed that all the three approaches produced high DNA yields. The agarose gel electrophoresis showed that the DNA fragments extracted from compost had a length of about 23 kb. A eubacterial 16S rRNA gene targeted primer pair (27F and 1 495R) was used for PCR amplification, and all the samples got almost the full length 16S rDNA sequence (about 1.5 kb). After digested by restriction endonucleases (Hae Ill and Alu I), the restriction map showed relatively identical microbial diversity in the DNA, which was extracted by the three different approaches. All the compost microbial DNA extracted by the three different approaches could be used for molecular ecological study, and researchers should choose the right approach for extracting microbial DNA from compost based on the facts.

  7. [Evaluation of the significance of molecular methods in the diagnosis of invasive fungal infections: comparison with conventional methods].

    Science.gov (United States)

    Susever, Serdar; Yeğenoğlu, Yıldız

    2011-04-01

    Direct microscopy and culture methods are still valuable standard conventional methods for the diagnosis of infections caused by true or opportunistic fungal pathogens, especially in high risk patients. However, some of the problems concerning the application and interpretation of those methods, indicate a need for more rapid, practical and reliable tests with high sensitivity and specificity. This study was conducted to compare the results obtained by molecular methods with the results of conventional methods performed simultaneously for the detection and identification of causative fungi in clinical samples. Clinical samples [24 bronchoalveolar lavage (BAL); 14 blood; 5 peritoneal, 4 pleural and 1 pericardial fluids; 1 cerebrospinal fluid (CSF), 1 urine] from 50 immunosuppressed patients were included in the study. All of the samples were cultivated on Sabouraud dextrose and brain-heart infusion agar media and incubated at 30°C and 37°C for 30 days. Samples other than blood were stained with 10-15% KOH + calcofluor white and examined by direct microscopy. Conventional identification of the isolates were performed by using basic morphological and biochemical characteristics. The isolation of fungal DNAs for polymerase chain reaction (PCR) was achieved by classical phenol-chloroform-isoamylalcohol procedure (9-10 hours) and commercial DNA extraction kit (6-7 hours) and general and species-specific primers (multiplex) from ITS1, ITS2, ITS3, ITS4, 5.8S rDNA and 28S rDNA regions were chosen for amplification. In PCR results, 550 base-paired (bp) bands obtained with universal primers were evaluated as fungal DNA positivity, and 273 bp, 320 bp, 423 bp, 357 bp, 136 bp and 385 bp bands with species-specific primers were evaluated as Candida albicans, Candida parapsilosis, Candida glabrata, Candida tropicalis, Cryptococcus neoformans and Aspergillus fumigatus positivities, respectively. Seventeen (34%) of the 50 samples yielded fungal growth on culture (C.albicans in 12

  8. A Simple and Rapid Identification Method for Mycobacterium bovis BCG with Loop-Mediated Isothermal Amplification.

    Directory of Open Access Journals (Sweden)

    Yuji Kouzaki

    Full Text Available Bacillus Calmette-Guérin (BCG is widely used as a live attenuated vaccine against Mycobacterium tuberculosis and is an agent for standard prophylaxis against the recurrence of bladder cancer. Unfortunately, it can cause severe infectious diseases, especially in immunocompromised patients, and the ability to immediately distinguish BCG from other M. tuberculosis complexes is therefore important. In this study, we developed a simple and easy-to-perform identification procedure using loop-mediated amplification (LAMP to detect deletions within the region of difference, which is deleted specifically in all M. bovis BCG strains. Reactions were performed at 64 °C for 30 min and successful targeted gene amplifications were detected by real-time turbidity using a turbidimeter and visual inspection of color change. The assay had an equivalent detection limit of 1.0 pg of genomic DNA using a turbidimeter whereas it was 10 pg with visual inspection, and it showed specificity against 49 strains of 44 pathogens, including M. tuberculosis complex. The expected LAMP products were confirmed through identical melting curves in real-time LAMP procedures. We employed the Procedure for Ultra Rapid Extraction (PURE kit to isolate mycobacterial DNA and found that the highest sensitivity limit with a minimum total cell count of mycobacterium (including DNA purification with PURE was up to 1 × 10(3 cells/reaction, based on color changes under natural light with FDA reagents. The detection limit of this procedure when applied to artificial serum, urine, cerebrospinal fluid, and bronchoalveolar lavage fluid samples was also about 1 × 10(3 cells/reaction. Therefore, this substitute method using conventional culture or clinical specimens followed by LAMP combined with PURE could be a powerful tool to enable the rapid identification of M. bovis BCG as point-of-care testing. It is suitable for practical use not only in resource-limited situations, but also in any

  9. Development of a fluorescence in situ hybridization (FISH) method for rapid detection of Ulva prolifera

    Science.gov (United States)

    Zhang, Qing-Chun; Liu, Qing; Kang, Zhen-Jun; Yu, Ren-Cheng; Yan, Tian; Zhou, Ming-Jiang

    2015-09-01

    Large-scale green tides have occurred consecutively since 2007 in the Yellow Sea (YS), China. The dominant causative species of the green tides has been identified as Ulva prolifera. The origin of green tides in the YS has been traced back to the Subei Shoal based on the results of remote-sensing, numerical simulations and field investigations. However, it is difficult to study the early development of green tides in the Subei Shoal because of the mixture of multiple green algae and the morphological diversity of U. prolifera when under variable environmental conditions. In this study, a rapid and accurate fluorescence in situ hybridization (FISH) method was developed to detect U. prolifera from the community of green algae targeting the 5S rDNA spacer region of U. prolifera. Two specific probes, 5S-1 and 5S-2, were designed based on the sequences of the 5S rDNA spacer regions of U. prolifera, Ulva linza and Ulva flexuosa. Specificity of the FISH method was tested using the six species of green algae commonly occurring in the Subei Shoal, including U. prolifera, U. linza, U. flexuosa, Ulva compressa, Ulva pertusa and Blidingia sp. The results showed that only U. prolifera could be labeled with both probes. Probe 5S-1, which showed a much higher labeling efficiency on U. prolifera, was ultimately selected as the probe for the FISH detection. The sample preparation method was optimized, particularly for the mature green algae, by the addition of cellulase and proteinase K in the pre-hybridization solution. Labeling efficiency with the probe 5S-1 reached 96% on average under the optimized conditions. The successful development of the FISH method has been applied to qualitative and quantitative analysis of field samples collected from the YS, and the results indicate a potential use in future green algae studies.

  10. A rapid method for the sequential separation of polonium, plutonium, americium and uranium in drinking water.

    Science.gov (United States)

    Lemons, B; Khaing, H; Ward, A; Thakur, P

    2018-02-06

    A new sequential separation method for the determination of polonium and actinides (Pu, Am and U) in drinking water samples has been developed that can be used for emergency response or routine water analyses. For the first time, the application of TEVA chromatography column in the sequential separation of polonium and plutonium has been studied. This method utilizes a rapid Fe +3 co-precipitation step to remove matrix interferences, followed by plutonium oxidation state adjustment to Pu 4+ and an incubation period of ~ 1 h at 50-60 °C to allow Po 2+ to oxidize to Po 4+ . The polonium and plutonium were then separated on a TEVA column, while separation of americium from uranium was performed on a TRU column. After separation, polonium was micro-precipitated with copper sulfide (CuS), while actinides were micro co-precipitated using neodymium fluoride (NdF 3 ) for counting by the alpha spectrometry. The method is simple, robust and can be performed quickly with excellent removal of interferences, high chemical recovery and very good alpha peak resolution. The efficiency and reliability of the procedures were tested by using spiked samples. The effect of several transition metals (Cu 2+ , Pb 2+ , Fe 3+ , Fe 2+ , and Ni 2+ ) on the performance of this method were also assessed to evaluate the potential matrix effects. Studies indicate that presence of up to 25 mg of these cations in the samples had no adverse effect on the recovery or the resolution of polonium alpha peaks. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Veterinary drug residues in meat: Concerns and rapid methods for detection.

    Science.gov (United States)

    Reig, Milagro; Toldrá, Fidel

    2008-01-01

    The use of substances having hormonal or thyreostatic action as well as β-agonists is banned in the European Union. However, sometimes forbidden drugs may be added to feeds for illegal administration to farm animals for promoting increased muscle development or increased water retention and thus obtain an economical benefit. The result is a fraudulent overweight of meat but, what is worse, residues of these substances may remain in meat and may pose a real threat to the consumer either through exposure to the residues, transfer of antibiotic resistance or allergy risk. This has exerted a great concern among European consumers. The control of the absence of these forbidden substances in animal foods and feeds is regulated in the European Union by Directive96/23/EC on measures to monitor certain substances and residues in live animals and animal products. Analytical methodology, including criteria for identification and confirmation, for the monitoring of compliance was also given in Decisions 93/256/EEC and 93/257/EEC. More recently, Decision 2002/657/EC provided rules for the analytical methods to be used in testing of official samples. A crucial step is the screening of veterinary drug residues in live animals, feeds and animal products in view of the remarkable number of samples and large variety of residues to be analysed. In recent years, different rapid methods having easy performance, high sensitivity and high throughput have been proposed and are being extensively used. These methods as well as other new methods are reviewed in this manuscript.

  12. TranScreen-N: Method for rapid screening of trans-ungual drug delivery enhancers.

    Science.gov (United States)

    Murthy, S Narasimha; Vaka, Siva Ram Kiran; Sammeta, Srinivasa Murthy; Nair, Anroop B

    2009-11-01

    Topical monotherapy of nail diseases such as onychomycosis and nail psoriasis has been less successful due to poor permeability of the human nail plate to topically administered drugs. Chemical enhancers are utilized to improve the drug delivery across the nail plate. Choosing the most effective chemical enhancers for the given drug and formulation is highly critical in determining the efficacy of topical therapy of nail diseases. Screening the large pool of enhancers using currently followed diffusion cell experiments would be tedious and expensive. The main objective of this study is to develop TranScreen-N, a high throughput method of screening trans-ungual drug permeation enhancers. It is a rapid microwell plate based method which involves two different treatment procedures; the simultaneous exposure treatment and the sequential exposure treatment. In the present study, several chemicals were evaluated by TranScreen-N and by diffusion studies in the Franz diffusion cell (FDC). Good agreement of in vitro drug delivery data with TranScreen-N data provided validity to the screening technique. In TranScreen-N technique, the enhancers can be grouped according to whether they need to be applied before or simultaneously with drugs (or by either procedures) to enhance the drug delivery across the nail plate. TranScreen-N technique can significantly reduce the cost and duration required to screen trans-ungual drug delivery enhancers. (c) 2009 Wiley-Liss, Inc. and the American Pharmacists Association

  13. A rapid method to authenticate vegetable oils through surface-enhanced Raman scattering

    Science.gov (United States)

    Lv, Ming Yang; Zhang, Xin; Ren, Hai Rui; Liu, Luo; Zhao, Yong Mei; Wang, Zheng; Wu, Zheng Long; Liu, Li Min; Xu, Hai Jun

    2016-03-01

    Vegetable oils are essential in our daily diet. Among various vegetable oils, the major difference lies in the composition of fatty acids, including unsaturated fatty acids (USFA) and saturated fatty acids (SFA). USFA include oleic acid (OA), linoleic acid (LA), and α-linolenic acid (ALA), while SFA are mainly palmitic acid (PA). In this study, the most typical and abundant USFA present with PA in vegetable oils were quantified. More importantly, certain proportional relationships between the integrated intensities of peaks centered at 1656 cm-1 (S1656) in the surface-enhanced Raman scattering spectra of different USFA were confirmed. Therefore, the LA or ALA content could be converted into an equivalent virtual OA content enabling the characterization of the USFA content in vegetable oils using the equivalent total OA content. In combination with the S1656 of pure OA and using peanut, sesame, and soybean oils as examples, the ranges of S1656 corresponding to the National Standards of China were established to allow the rapid authentication of vegetable oils. Gas chromatograph-mass spectrometer analyses verified the accuracy of the method, with relative errors of less than 5%. Moreover, this method can be extended to other detection fields, such as diseases.

  14. New multiplex PCR methods for rapid screening of genetically modified organisms in foods.

    Science.gov (United States)

    Datukishvili, Nelly; Kutateladze, Tamara; Gabriadze, Inga; Bitskinashvili, Kakha; Vishnepolsky, Boris

    2015-01-01

    We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs). New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV) 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS) terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps) gene and 258 bp fragment of Cry1Ab delta-endotoxin (cry1Ab) gene for GMO screening. The certified reference materials containing Roundup Ready soybean (RRS) and maize MON 810 were applied for the development and optimization of uniplex and multiplex PCR systems. Evaluation of amplification products by agarose gel electrophoresis using negative and positive controls confirmed high specificity and sensitivity at 0.1% GMO for both RRS and MON 810. The fourplex PCR was developed and optimized that allows simultaneous detection of three common transgenic elements, such as: CaMV 35S promoter, NOS terminator, epsps gene together with soybean-specific lectin gene. The triplex PCR developed enables simultaneous identification of transgenic elements, such as: 35S promoter and cry1Ab gene together with maize zein gene. The analysis of different processed foods demonstrated that multiplex PCR methods developed in this study are useful for accurate and fast screening of GM food products.

  15. A simple and rapid method for optical visualization and quantification of bacteria on textiles

    Science.gov (United States)

    Stiefel, Philipp; Schneider, Jana; Amberg, Caroline; Maniura-Weber, Katharina; Ren, Qun

    2016-01-01

    To prevent bacterial contamination on textiles and the associated undesired effects different biocidal coatings have been investigated and applied. However, due to health and environmental concerns anti-adhesive coatings preventing the binding of bacteria would be favored. To develop such anti-adhesive coatings simple assays for reliable and fast screening are beneficial. Here an easy-to-handle, robust and rapid assay to assess bacteria on textiles utilizing a tetrazolium salt was reported. The assay allowed direct eye visualization of the color change of the textiles containing bacteria, facilitating fast screening. Quantification of the adhered bacteria could be done by generating standard curves which correlate the staining intensity to cell numbers. An additional advantage of the described assay is that with the same detection method anti-adhesive and biocidal effects can be investigated. The method was applied to different coatings, using Pseudomonas aeruginosa and Staphylococcus aureus as model organisms. The detection limit was found to be between 2.5 * 106 and 9.4 * 108 for P. aeruginosa and between 1 * 106 and 3.3 * 108 for S. aureus. The anti-adhesive coating PLUMA was demonstrated to reduce bacterial adhesion without killing them, whereas the biocidal coating TH22-27 caused a clear reduction in the number of viable cells. PMID:28004762

  16. The rapid interphase chromosome assay (RICA implementation: comparison with other PCC methods

    Directory of Open Access Journals (Sweden)

    Sommer Sylwester

    2015-12-01

    Full Text Available A report is presented on the advantages of the rapid interphase chromosome assay (RICA and the difficulties that may be met while implementing this method for application in biological dosimetry. The RICA test can be applied on unstimulated human lymphocytes; this is an advantage in comparison with the dicentric chromosomes or micronucleus tests. In the former two tests, stimulated lymphocytes are examined and hence, 48 h more are needed to obtain cells traversing the cell cycle. Due to the use of unstimulated nondividing cells, higher numbers of cells are available for RICA analysis than for dicentric chromosomes or micronuclei tests. Moreover, the method can be applied after exposure to ionizing radiation doses in excess of 5 Gy. Such doses cause a significant cell cycle delay or result in the loss of G2 phase and mitotic cells because of apoptosis. Therefore, the traditional biodosimetry based on the evaluation of the incidence of damage to chromosomes is very difficult to carry out. This is due to the lack of an adequate number of mitotic cells for analysis. RICA is free of this disadvantage. An automatic microscope can be used to retrieve cell images; automatic image analysis can also be used.

  17. Development of a Rapid and Simple Method to Remove Polyphenols from Plant Extracts

    Directory of Open Access Journals (Sweden)

    Imali Ranatunge

    2017-01-01

    Full Text Available Polyphenols are secondary metabolites of plants, which are responsible for prevention of many diseases. Polyvinylpolypyrrolidone (PVPP has a high affinity towards polyphenols. This method involves the use of PVPP column to remove polyphenols under centrifugal force. Standards of gallic acid, epigallocatechin gallate, vanillin, and tea extracts (Camellia sinensis were used in this study. PVPP powder was packed in a syringe with different quantities. The test samples were layered over the PVPP column and subjected to centrifugation. Supernatant was tested for the total phenol content. The presence of phenolic compounds and caffeine was screened by HPLC and measuring the absorbance at 280. The antioxidant capacity of standards and tea extracts was compared with the polyphenol removed fractions using DPPH scavenging assay. No polyphenols were found in polyphenolic standards or tea extracts after PVPP treatment. The method described in the present study to remove polyphenols is simple, inexpensive, rapid, and efficient and can be employed to investigate the contribution of polyphenols present in natural products to their biological activity.

  18. A Rapid and Low-Cost Nonlithographic Method to Fabricate Biomedical Microdevices for Blood Flow Analysis

    Directory of Open Access Journals (Sweden)

    Elmano Pinto

    2014-12-01

    Full Text Available Microfluidic devices are electrical/mechanical systems that offer the ability to work with minimal sample volumes, short reactions times, and have the possibility to perform massive parallel operations. An important application of microfluidics is blood rheology in microdevices, which has played a key role in recent developments of lab-on-chip devices for blood sampling and analysis. The most popular and traditional method to fabricate these types of devices is the polydimethylsiloxane (PDMS soft lithography technique, which requires molds, usually produced by photolithography. Although the research results are extremely encouraging, the high costs and time involved in the production of molds by photolithography is currently slowing down the development cycle of these types of devices. Here we present a simple, rapid, and low-cost nonlithographic technique to create microfluidic systems for biomedical applications. The results demonstrate the ability of the proposed method to perform cell free layer (CFL measurements and the formation of microbubbles in continuous blood flow.

  19. A rapid and sensitive spectrophotometric method for the determination of benzoyl peroxide in wheat flour samples

    Directory of Open Access Journals (Sweden)

    Kraingkrai Ponhong

    2015-12-01

    Full Text Available A simple, rapid, and sensitive spectrophotometric method for the determination of benzoyl peroxide (BPO in wheat flour samples was developed. The detection principle is based on BPO reacted with 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS to obtain a blue-green colored product that was detected at 415 nm by spectrophotometry. The effect of factors influencing the color reaction was investigated. Under the selected conditions, the linear range for quantification of BPO was observed between 0.2–1.0 mg L−1 with r2 = 0.998. The limit of detection (LOD was 0.025 mg L−1. The developed method obtained superior precision (relative standard deviation < 2% using 11 repeatability at 0.2 mg L−1, 0.6 mg L−1, and 0.8 mg L−1. The proposed methodology was successfully applied to determine BPO in wheat flour samples.

  20. New multiplex PCR methods for rapid screening of genetically modified organisms in foods

    Directory of Open Access Journals (Sweden)

    Nelly eDatukishvili

    2015-07-01

    Full Text Available We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs. New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps gene and 258 bp fragment of Cry1Ab delta-endotoxin (cry1Ab gene for GMO screening. The certified reference materials containing Roundup Ready soybean (RRS and maize MON 810 were applied for the development and optimization of uniplex and multiplex PCR systems. Evaluation of amplification products by agarose gel electrophoresis using negative and positive controls confirmed high specificity and sensitivity at 0.1% GMO for both RRS and MON 810. The fourplex PCR was developed and optimized that allows simultaneous detection of three common transgenic elements, such as: CaMV 35S promoter, NOS terminator, epsps gene together with soybean-specific lectin gene. The triplex PCR developed enables simultaneous identification of transgenic elements, such as: 35S promoter and cry1Ab gene together with maize zein gene. The analysis of different processed foods demonstrated that multiplex PCR methods developed in this study are useful for accurate and fast screening of GM food products.

  1. Regional distribution of methionine adenosyltransferase in rat brain as measured by a rapid radiochemical method

    Energy Technology Data Exchange (ETDEWEB)

    Hiemke, C.; Ghraf, R.

    1981-09-01

    The distribution of methionine adenosyltransferase (MAT) in the CNS of the rat was studied by use of a rapid, sensitive and specific radiochemical method. The S-adenosyl-(methyl-/sup 14/C)L-methionine ((/sup 14/C)SAM) generated by adenosyl transfer from ATP to (methyl-/sup 14/C)L-methionine is quantitated by use of a SAM-consuming transmethylation reaction. Catechol O-methyltransferase (COMT), prepared from rat liver, transfers the methyl-/sup 14/C group of SAM to 3,4-dihydroxybenzoic acid. The /sup 14/C-labelled methylation products, vanillic acid and isovanillic acid, are separated from unreacted methionine by solvent extraction and quantitated by liquid scintillation counting. Compared to other methods of MAT determination, which include separation of generated SAM from methionine by ion-exchange chromatography, the assay described exhibited the same high degree of specificity and sensitivity but proved to be less time consuming. MAT activity was found to be uniformly distributed between various brain regions and the pituitary gland of adult male rats. In the pineal gland the enzyme activity is about tenfold higher.

  2. Rapid DNA transformation in Salmonella Typhimurium by the hydrogel exposure method.

    Science.gov (United States)

    Elabed, Hamouda; Hamza, Rim; Bakhrouf, Amina; Gaddour, Kamel

    2016-07-01

    Even with advances in molecular cloning and DNA transformation, new or alternative methods that permit DNA penetration in Salmonella enterica subspecies enterica serovar Typhimurium are required in order to use this pathogen in biotechnological or medical applications. In this work, an adapted protocol of bacterial transformation with plasmid DNA based on the "Yoshida effect" was applied and optimized on Salmonella enterica serovar Typhimurium LT2 reference strain. The plasmid transference based on the use of sepiolite as acicular materials to promote cell piercing via friction forces produced by spreading on the surface of a hydrogel. The transforming mixture containing sepiolite nanofibers, bacterial cells to be transformed and plasmid DNA were plated directly on selective medium containing 2% agar. In order to improve the procedure, three variables were tested and the transformation of Salmonella cells was accomplished using plasmids pUC19 and pBR322. Using the optimized protocol on Salmonella LT2 strain, the efficiency was about 10(5) transformed cells per 10(9) subjected to transformation with 0.2μg plasmid DNA. In summary, the procedure is fast, offers opportune efficiency and promises to become one of the widely used transformation methods in laboratories. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Development of a one-step probe based molecular assay for rapid immunodiagnosis of infection with M. tuberculosis using dried blood spots.

    Directory of Open Access Journals (Sweden)

    Thomas Blauenfeldt

    Full Text Available BACKGROUND: Antigen specific release of IP-10 is the most promising alternative marker to IFN-γ for infection with M. tuberculosis. Compared to Interferon-γ release assays (IGRA, IP-10 is released in high levels enabling novel approaches such as field friendly dried blood spots (DBS and molecular detection. AIM: To develop a robust IP-10 based molecular assay for the diagnosis of infection with M. tubercuolsis from whole blood and DBS. METHOD: We developed a one-step probe based multiplex RT-qPCR assay for detecting IP-10 and IFN-γ mRNA expression from whole blood and DBS samples. The assay was validated and applied for the diagnosis of M. tuberculosis infection in DBS samples from 43 patients with confirmed TB, 13 patients with latent TB and 96 presumed uninfected controls. In parallel, IP-10 and INF-γ levels were measured in Quantiferon (QFT-TB plasma supernatants. RESULTS: IP-10 mRNA upregulation was detectable at 4 hours after stimulation (6 fold upregulation peaking at 8 hours (108 fold upregulation. IFN-γ expression occurred in concert but levels were lower (peak 6.7 fold upregulation. IP-10 gene expression level was significantly higher in patients with tuberculosis (median 31.2, IQR 10.7-67.0 and persons with latent tuberculosis infection (LTBI (41.2, IQR 9.8-64.9 compared to healthy controls (1.6, IQR 1.1-2.4; p<0.0001. The IP-10 mRNA and protein based tests had comparable diagnostic accuracy to QFT-TB, sensitivity (85% and 88% vs 85% and specificity (96% and 96% vs 97%, p = ns.. CONCLUSION: We developed a rapid, robust and accurate molecular immunodiagnostic test for M. tuberculosis infection. By combining DBS based sample acquisition, mail or currier based sample transport with centralized molecular detection, this immunodiagnostic test concept can reduce the local technological requirements everywhere and make it possible to offer highly accurate immunodiagnostic tests in low resource settings.

  4. Method and apparatus using selected superparamagnetic labels for rapid quantification of immunochromatographic tests

    Directory of Open Access Journals (Sweden)

    Mika PA Laitinen

    2009-04-01

    Full Text Available Mika PA Laitinen1, Jari Salmela2, Leona Gilbert1, Risto Kaivola1, Topi Tikkala2, Christian Oker-Blom1, Jukka Pekola3, Matti Vuento11Department of Biological and Environmental Science; 2Department of Physics, University of Jyväskylä, Jyväskylä, Finland; 3Low Temperature Laboratory, Helsinki University of Technology, Helsinki, FinlandAbstract: A rapid method and instrumentation for quantification of immunochromatographic tests (ICT are described. The principle and performance of the method was demonstrated by measuring the levels of human chorionic gonadotropin (hCG present in urine. The test format was a sandwich assay using two distinct monoclonal antibodies directed against hCG. The first anti-hCG antibody was labeled with superparamagnetic particles whereas the second was immobilized as a narrow detection zone on a porous membrane. The human urine sample was mixed with superparamagnetic particles coated with the first anti-hCG antibody, and the mixture was allowed to migrate past the detection zone containing the second anti-hCG antibody. Capillary forces facilitated migration of the immune complexes along the porous membrane. The amount of superparamagnetic particle-labelled monoclonal anti-hCG bound to the detection zone was directly proportional to the amount of hCG present in the sample as detected by measuring magnetization in the detector coil. The method had a practical detection limit of 20 U/l (54 nM of hCG per 5 μl of human urine and a linear range of three decades from 20 U/l to 10 000 U/l. In addition, the analysis was completed within less than 10 minutes. Thus, the test format should be suitable for fast detection and monitoring of a large variety of clinically important parameters and analytes.Keywords: affinity, biosensor, hCG, immunochromatography, magnetization, superparamagnetic

  5. Rapid methods to assess sanitizing efficacy of benzalkonium chloride to Listeria monocytogenes biofilms.

    Science.gov (United States)

    Romanova, Nadya A; Gawande, Purushottam V; Brovko, Lubov Y; Griffiths, Mansel W

    2007-12-01

    Different methods were used to investigate biofilm growth including crystal violet staining, ATP bioluminescence and total viable count. Seven strains of Listeria monocytogenes and 8 of their derivative strains were screened for their capacity to form biofilms. Both adaptation to benzalkonium chloride (BC) and curing of plasmids did not significantly affect biofilm-forming ability. The strains of L. monocytogenes belonging to serotype 1 formed biofilms significantly better as compared to serotype 4 (P=0.0003). To estimate the efficacy of BC for biofilm elimination the best and the poorest biofilm-formers were used (C719 and LJH 381). It was observed that, L. monocytogenes strain C719 in biofilms is at least 1000 times more resistant to BC than in planktonic form. Cells present in biofilms were shown to recover and grow after BC treatment thus providing a source of recontamination. It was shown that ATP bioluminescence provides good correlation with bacterial counts of L. monocytogenes in biofilms. Staining with crystal violet, on the contrary, did not correlate with bacterial growth in biofilms in the presence of high concentrations of BC but provided information on the concentration of bacterial cells, both live and dead, attached to the surface. ATP bioluminescence was found to be a reliable method for rapid estimation of the efficacy of sanitizers for biofilm disinfection. Crystal violet staining, on the other hand, was shown to be a suitable method to monitor removal of biofilms. Our investigation showed that for Listeria biofilms concentrations of BC higher then 10 mg/ml should be applied for at least 30 min to kill almost all the live cells in biofilms. However, this concentration was still not enough to remove biofilms from the surface of plastic.

  6. Development of a rapid, one-step screening method for the isolation of presumptive proteolytic enterococci.

    Science.gov (United States)

    Graham, Ken; Rea, Rosemary; Simpson, Paul; Stack, Helena

    2017-01-01

    Enterococci show higher proteolytic activities than other lactic acid bacteria and thus have received considerable attention in scientific literature in recent years. Proteolytic enzymes of enterococci have warranted the use of some species as starter, adjuncts or protective cultures and as probiotics, while in some strains they have also been linked with virulence. Consequently, the isolation and identification of proteolytic enterococci is becoming of increasing interest and importance. However, current screening methods for proteolytic enterococci can be time consuming, requiring a two-step procedure which may take up to 96h. This study describes a method, utilising Kanamycin Skim Milk Aesculin Azide (KSMEA) agar, for the isolation of proteolytic enterococci in one-step, thereby significantly reducing screening time. KSMEA combines the selective properties of Kanamycin Aesculin Azide Agar (KAA) with skim milk powder for the detection of proteolytic enterococci. Enterococci produced colonies with a black halo on KSMEA which were accompanied by a zone of clearing in the media when enterococci were proteolytic. KSMEA medium retained the selectivity of KAA, while proteolytic enterococci were easily distinguished from non-proteolytic enterococci when two known strains were propagated on KSMEA. KSMEA also proved effective at isolating and detecting enterococci in raw milk, faeces and soil. Isolates recovered from the screen were confirmed as enterococci using genus-specific primers. Proteolytic enterococci were present in the raw milk sample only and were easily distinguishable from non-proteolytic enterococci and other microorganisms. Therefore, KSMEA provides a rapid, one-step screening method for the isolation of presumptive proteolytic enterococci. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Molecular typing of Legionella pneumophila from air-conditioning cooling waters using mip gene, SBT, and FAFLP methods.

    Science.gov (United States)

    Gong, Xiangli; Li, Juntao; Zhang, Ying; Hou, Shuiping; Qu, Pinghua; Yang, Zhicong; Chen, Shouyi

    2017-08-01

    Legionella spp. are important waterborne pathogens. Molecular typing has become an important method for outbreaks investigations and source tracking of Legionnaires. In a survey program conducted by the Guangzhou Center for Disease Control and Prevention, multiple serotypes Legionella pneumophila (L. pneumophila) were isolated from waters in air-conditioning cooling towers in urban Guangzhou region, China between 2008 and 2011. Three genotyping methods, mip (macrophage infectivity potentiator) genotyping, SBT (sequence-based typing), and FAFLP (fluorescent amplified fragment length polymorphism analysis) were used to type these waterborne L. pneumophila isolates. The three methods were capable of typing all the 134 isolates and a reference strain of L. pneumophila (ATCC33153), with discriminatory indices of 0.7034, 0.9218, and 0.9376, for the mip, SBT, and FAFLP methods respectively. Among the 9 serotypes of the 134 isolates, 10, 50, and 34 molecular types were detected by the mip, SBT, and FAFLP methods respectively. The mip genotyping and SBT typing are more feasible for inter-laboratory results sharing and comparison of different types of L. pneumophila. The SBT and FAFLP typing methods were rapid with higher discriminatory abilities. Combinations of two or more of the typing methods enables more accurate typing of Legionella isolates for outbreak investigations and source tracking of Legionnaires. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Improvements in fast-neutron spectroscopy methods (1961); Amelioration des methodes de spectrometrie des neutrons rapides (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Cambou, F. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-02-15

    This research aimed at improving fast-neutron electronic detectors based on n-p elastic scattering. The first part concerns proportional counters; careful constructional methods have made it possible to plot mono-energetic neutron spectra in the range 700 keV - 3 MeV with a resolution of 7 per cent. The second part concerns scintillation counters: an organic scintillator and an inorganic scintillator covered with a thin layer of a scattering agent. An exact study of the types of scintillation has made it possible to develop efficient discriminator circuits. Different neutron spectra plotted in the presence of a strong gamma background are presented. The last part deals with the development of form discrimination methods for the study, in the actual beam, of the elastic scattering of 14.58 MeV electrons. With hydrogen, the distribution f ({phi}) of the recoil protons is f({phi}) = 1 + 0.034 cos {phi} + 0.042 cos{sup 2} {phi}. With tritium the scattering is strongly anisotropic; the curve representing the variation of the differential cross-section for the elastic scattering in the centre of mass system is obtained with a target containing 1 cm{sup 3} of tritium. (author) [French] Le travail a porte sur l'amelioration des detecteurs electroniques de neutrons rapides bases sur la diffusion elastique n-p. La premiere partie est relative aux compteurs proportionnels; des methodes soignees de fabrication ont permis des traces de spectres de neutrons monoenergetiques dans le domaine 700 keV - 3 MeV avec une resolution de 7 pour cent. La deuxieme partie est relative au compteur a scintillations; scintillateur organique et scintillateur mineral recouvert d'un diffuseur mince. Une etude precise des formes de scintillations a permis la mise au point de circuits discriminateurs efficaces. Differents spectres de neutrons traces en presence d'un fond gamma intense sont presentes. La derniere partie est relative a la mise en oeuvre des methodes de discrimination de

  9. Development of a rapid method for the quantitative determination of deoxynivalenol using Quenchbody

    Energy Technology Data Exchange (ETDEWEB)

    Yoshinari, Tomoya [Division of Microbiology, National Institute of Health Sciences, 1-18-1, Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan); Ohashi, Hiroyuki; Abe, Ryoji; Kaigome, Rena [Biomedical Division, Ushio Inc., 1-12 Minamiwatarida-cho, Kawasaki-ku, Kawasaki 210-0855 (Japan); Ohkawa, Hideo [Research Center for Environmental Genomics, Kobe University, 1-1 Rokkodai, Nada, Kobe 657-8501 (Japan); Sugita-Konishi, Yoshiko, E-mail: y-konishi@azabu-u.ac.jp [Department of Food and Life Science, Azabu University, 1-17-71 Fuchinobe, Chuo-ku, Sagamihara, Kanagawa 252-5201 (Japan)

    2015-08-12

    Quenchbody (Q-body) is a novel fluorescent biosensor based on the antigen-dependent removal of a quenching effect on a fluorophore attached to antibody domains. In order to develop a method using Q-body for the quantitative determination of deoxynivalenol (DON), a trichothecene mycotoxin produced by some Fusarium species, anti-DON Q-body was synthesized from the sequence information of a monoclonal antibody specific to DON. When the purified anti-DON Q-body was mixed with DON, a dose-dependent increase in the fluorescence intensity was observed and the detection range was between 0.0003 and 3 mg L{sup −1}. The coefficients of variation were 7.9% at 0.003 mg L{sup −1}, 5.0% at 0.03 mg L{sup −1} and 13.7% at 0.3 mg L{sup −1}, respectively. The limit of detection was 0.006 mg L{sup −1} for DON in wheat. The Q-body showed an antigen-dependent fluorescence enhancement even in the presence of wheat extracts. To validate the analytical method using Q-body, a spike-and-recovery experiment was performed using four spiked wheat samples. The recoveries were in the range of 94.9–100.2%. The concentrations of DON in twenty-one naturally contaminated wheat samples were quantitated by the Q-body method, LC-MS/MS and an immunochromatographic assay kit. The LC-MS/MS analysis showed that the levels of DON contamination in the samples were between 0.001 and 2.68 mg kg{sup −1}. The concentrations of DON quantitated by LC-MS/MS were more strongly correlated with those using the Q-body method (R{sup 2} = 0.9760) than the immunochromatographic assay kit (R{sup 2} = 0.8824). These data indicate that the Q-body system for the determination of DON in wheat samples was successfully developed and Q-body is expected to have a range of applications in the field of food safety. - Highlights: • A rapid method for quantitation of DON using Q-body has been developed. • A recovery test using the anti-DON Q-body was performed. • The concentrations of DON in wheat

  10. A rapid method for detection of five known mutations associated with aminoglycoside-induced deafness

    Directory of Open Access Journals (Sweden)

    Greinwald John H

    2009-01-01

    Full Text Available Abstract Background South Africa has one of the highest incidences of multidrug-resistant tuberculosis (MDR-TB in the world. Concomitantly, aminoglycosides are commonly used in this country as a treatment against MDR-TB. To date, at least five mutations are known to confer susceptibility to aminoglycoside-induced hearing loss. The aim of the present study was to develop a rapid screening method to determine whether these mutations are present in the South African population. Methods A multiplex method using the SNaPshot technique was used to screen for five mutations in the MT-RNR1 gene: A1555G, C1494T, T1095C, 961delT+C(n and A827G. A total of 204 South African control samples, comprising 98 Mixed ancestry and 106 Black individuals were screened for the presence of the five mutations. Results A robust, cost-effective method was developed that detected the presence of all five sequence variants simultaneously. In this pilot study, the A1555G mutation was identified at a frequency of 0.9% in the Black control samples. The 961delT+C(n variant was present in 6.6% of the Black controls and 2% of the Mixed ancestry controls. The T1095C, C1494T and A827G variants were not identified in any of the study participants. Conclusion The frequency of 0.9% for the A1555G mutation in the Black population in South Africa is of concern given the high incidence of MDR-TB in this particular ethnic group. Future larger studies are warranted to determine the true frequencies of the aminoglycoside deafness mutations in the general South African population. The high frequencies of the 961delT+C(n variant observed in the controls suggest that this change is a common non-pathogenic polymorphism. This genetic method facilitates the identification of individuals at high risk of developing hearing loss prior to the start of aminoglycoside therapy. This is important in a low-resource country like South Africa where, despite their adverse side-effects, aminoglycosides will

  11. Rapid and simple detection of foot-and-mouth disease virus: Evaluation of a cartridge-based molecular detection system for use in basic laboratories.

    Science.gov (United States)

    Goller, K V; Dill, V; Madi, M; Martin, P; Van der Stede, Y; Vandenberge, V; Haas, B; Van Borm, S; Koenen, F; Kasanga, C J; Ndusilo, N; Beer, M; Liu, L; Mioulet, V; Armson, B; King, D P; Fowler, V L

    2017-11-09

    Highly contagious transboundary animal diseases such as foot-and-mouth disease (FMD) are major threats to the productivity of farm animals. To limit the impact of outbreaks and to take efficient steps towards a timely control and eradication of the disease, rapid and reliable diagnostic systems are of utmost importance. Confirmatory diagnostic assays are typically performed by experienced operators in specialized laboratories, and access to this capability is often limited in the developing countries with the highest disease burden. Advances in molecular technologies allow implementation of modern and reliable techniques for quick and simple pathogen detection either in basic laboratories or even at the pen-side. Here, we report on a study to evaluate a fully automated cartridge-based real-time RT-PCR diagnostic system (Enigma MiniLab® ) for the detection of FMD virus (FMDV). The modular system integrates both nucleic acid extraction and downstream real-time RT-PCR (rRT-PCR). The analytical sensitivity of this assay was determined using serially diluted culture grown FMDV, and the performance of the assay was evaluated using a selected range of FMDV positive and negative clinical samples of bovine, porcine and ovine origin. The robustness of the assay was evaluated in an international inter-laboratory proficiency test and by deployment into an African laboratory. It was demonstrated that the system is easy to use and can detect FMDV with high sensitivity and specificity, roughly on par with standard laboratory methods. This cartridge-based automated real-time RT-PCR system for the detection of FMDV represents a reliable and easy to use diagnostic tool for the early and rapid disease detection of acutely infected animals even in remote areas. This type of system could be easily deployed for routine surveillance within endemic regions such as Africa or could alternatively be used in the developed world. © 2017 The Authors. Transboundary and Emerging Diseases

  12. A Rapid and Simple TLC-Densitometric Method for Assay of Clobetasol Propionate in Topical Solution.

    Science.gov (United States)

    Dolowy, Malgorzata; Kozik, Violetta; Bak, Andrzej; Jampilek, Josef; Barbusinski, Krzysztof; Thomas, Maciej; Pyka-Pajak, Alina

    2017-11-03

    A rapid, simple to use and low-cost thin-layer chromatographic procedure in normal phase system with densitometric detection at 246 nm was carefully validated according to the International Conference on Harmonisation (ICH) guidelines for assay of clobetasol propionate in topical solution containing clobetasol propionate in quantity 0.50 mg/mL. The adopted thin-layer chromatographic (TLC)-densitometric procedure could effectively separate clobetasol propionate from its related compound, namely clobetasol. It is linear for clobetasol propionate in the range of 0.188 ÷ 5 µg/spot. The limit of detection (LOD) and limit of quantification (LOQ) value is 0.061 and 0.186 µg/spot, respectively. Accuracy of proposed procedure was evaluated by recovery test. The mean recovery of studied clobetasol propionate ranges from 98.7 to 101.0%. The coefficient of variation (CV, %) obtained during intra-day and inter-day studies, which was less than 2% (0.40 ÷ 1.17%), confirms the precision of described method. The assay value of clobetasol propionate is consistent with the pharmacopoeial requirements. In conclusion, it can be suitable as a simple and economic procedure for routine quality control laboratories of clobetasol propionate in topical solution.

  13. Hydrodynamic Voltammetry as a Rapid and Simple Method for Evaluating Soil Enzyme Activities

    Directory of Open Access Journals (Sweden)

    Kazuto Sazawa

    2015-03-01

    Full Text Available Soil enzymes play essential roles in catalyzing reactions necessary for nutrient cycling in the biosphere. They are also sensitive indicators of ecosystem stress, therefore their evaluation is very important in assessing soil health and quality. The standard soil enzyme assay method based on spectroscopic detection is a complicated operation that requires the removal of soil particles. The purpose of this study was to develop a new soil enzyme assay based on hydrodynamic electrochemical detection using a rotating disk electrode in a microliter droplet. The activities of enzymes were determined by measuring the electrochemical oxidation of p-aminophenol (PAP, following the enzymatic conversion of substrate-conjugated PAP. The calibration curves of β-galactosidase (β-gal, β-glucosidase (β-glu and acid phosphatase (AcP showed good linear correlation after being spiked in soils using chronoamperometry. We also performed electrochemical detection using real soils. Hydrodynamic chronoamperometry can be used to assess the AcP in soils, with a detection time of only 90 s. Linear sweep voltammetry was used to measure the amount of PAP released from β-gal and β-glu by enzymatic reaction after 60 min. For the assessment of soil enzymes, the results of hydrodynamic voltammetry assay compared favorably to those using a standard assay procedure, but this new procedure is more user-friendly, rapid and simple.

  14. An assessment of various blood collection and transfer methods used for malaria rapid diagnostic tests

    Directory of Open Access Journals (Sweden)

    Baik Fred

    2007-11-01

    Full Text Available Abstract Background Four blood collection and transfer devices commonly used for malaria rapid diagnostic tests (RDTs were assessed for their consistency, accuracy and ease of use in the hands of laboratory technicians and village health workers. Methods Laboratory technicians and village health workers collected blood from a finger prick using each device in random order, and deposited the blood either on filter paper or into a suitable casette-type RDT. Consistency and accuracy of volume delivered was determined by comparing the measurements of the resulting blood spots/heights with the measurements of laboratory-prepared pipetted standard volumes. The effect of varying blood volumes on RDT sensitivity and ease of use was also observed. Results There was high variability in blood volume collected by the devices, with the straw and the loop, the most preferred devices, usually transferring volumes greater than intended, while the glass capillary tube and the plastic pipette transferring less volume than intended or none at all. Varying the blood volume delivered to RDTs indicated that this variation is critical to RDT sensitivity only when the transferred volume is very low. Conclusion None of the blood transfer devices assessed performed consistently well. Adequate training on their use is clearly necessary, with more development efforts for improved designs to be used by remote health workers, in mind.

  15. Rapid characterization of transgenic and non-transgenic soybean oils by chemometric methods using NIR spectroscopy

    Science.gov (United States)

    Luna, Aderval S.; da Silva, Arnaldo P.; Pinho, Jéssica S. A.; Ferré, Joan; Boqué, Ricard

    Near infrared (NIR) spectroscopy and multivariate classification were applied to discriminate soybean oil samples into non-transgenic and transgenic. Principal Component Analysis (PCA) was applied to extract relevant features from the spectral data and to remove the anomalous samples. The best results were obtained when with Support Vectors Machine-Discriminant Analysis (SVM-DA) and Partial Least Squares-Discriminant Analysis (PLS-DA) after mean centering plus multiplicative scatter correction. For SVM-DA the percentage of successful classification was 100% for the training group and 100% and 90% in validation group for non transgenic and transgenic soybean oil samples respectively. For PLS-DA the percentage of successful classification was 95% and 100% in training group for non transgenic and transgenic soybean oil samples respectively and 100% and 80% in validation group for non transgenic and transgenic respectively. The results demonstrate that NIR spectroscopy can provide a rapid, nondestructive and reliable method to distinguish non-transgenic and transgenic soybean oils.

  16. New 16-plex PCR method for rapid detection of diarrheagenic Escherichia coli directly from stool samples.

    Science.gov (United States)

    Antikainen, J; Tarkka, E; Haukka, K; Siitonen, A; Vaara, M; Kirveskari, J

    2009-08-01

    A rapid 16-plex polymerase chain reaction (PCR) suitable for routine diagnostics of diarrheagenic Escherichia coli (EHEC, EIEC, EAEC, ETEC, and EPEC) was developed, validated with control strains, and tested with 250 diarrhoeal stool samples. The specificity was 100% when tested with 289 control bacterial strains, and the analytical sensitivity of automated DNA extraction directly from stool samples was made by boiling the bacterial culture (10(4)-10(5) colony forming units/ml). The assay design starting directly from extraction of stool DNA allowed same day analysis without compromising sensitivity and specificity, which makes it superior compared to PCR after culturing the bacteria. The 16-plex PCR method demonstrated high prevalence of diarrheagenic E. coli in stool samples of patients returning from abroad (39.0%) in contrast to the patients with no travel history (8.7%; p < 0.001). The high prevalence of diarrheagenic E. coli suggests that their screening should be part of normal diarrhoea diagnostics, at least in the leading diagnostic laboratories.

  17. HPLC method for rapidly following biodiesel fuel transesterification reaction progress using a core-shell column

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Samuel J.; Ott, Lisa S. [California State University, Chico, CA (United States)

    2012-07-15

    There are a wide and growing variety of feedstocks for biodiesel fuel. Most commonly, these feedstocks contain triglycerides which are transesterified into the fatty acid alkyl esters (FAAEs) which comprise biodiesel fuel. While the tranesterification reaction itself is simple, monitoring the reaction progress and reaction products is not. Gas chromatography-mass spectrometry is useful for assessing the FAAE products, but does not directly address either the tri-, di-, or monoglycerides present from incomplete transesterification or the free fatty acids which may also be present. Analysis of the biodiesel reaction mixture is complicated by the solubility and physical property differences among the components of the tranesterification reaction mixture. In this contribution, we present a simple, rapid HPLC method which allows for monitoring all of the main components in a biodiesel fuel transesterification reaction, with specific emphasis on the ability to monitor the reaction as a function of time. The utilization of a relatively new, core-shell stationary phase for the HPLC column allows for efficient separation of peaks with short elution times, saving both time and solvent. (orig.)

  18. Lock-in thermography as a rapid and reproducible thermal characterization method for magnetic nanoparticles

    Science.gov (United States)

    Lemal, Philipp; Geers, Christoph; Monnier, Christophe A.; Crippa, Federica; Daum, Leopold; Urban, Dominic A.; Rothen-Rutishauser, Barbara; Bonmarin, Mathias; Petri-Fink, Alke; Moore, Thomas L.

    2017-04-01

    Lock-in thermography (LIT) is a sensitive imaging technique generally used in engineering and materials science (e.g. detecting defects in composite materials). However, it has recently been expanded for investigating the heating power of nanomaterials, such as superparamagnetic iron oxide nanoparticles (SPIONs). Here we implement LIT as a rapid and reproducible method that can evaluate the heating potential of various sizes of SPIONs under an alternating magnetic field (AMF), as well as the limits of detection for each particle size. SPIONs were synthesized via thermal decomposition and stabilized in water via a ligand transfer process. Thermographic measurements of SPIONs were made by stimulating particles of varying sizes and increasing concentrations under an AMF. Furthermore, a commercially available SPION sample was included as an external reference. While the size dependent heating efficiency of SPIONs has been previously described, our objective was to probe the sensitivity limits of LIT. For certain size regimes it was possible to detect signals at concentrations as low as 0.1 mg Fe/mL. Measuring at different concentrations enabled a linear regression analysis and extrapolation of the limit of detection for different size nanoparticles.

  19. A method for the rapid detection and identification of halo blight pathogen on common bean

    Directory of Open Access Journals (Sweden)

    Popović Tatjana

    2014-01-01

    Full Text Available A diagnostic method based on nested-PCR, followed by ELISA and conventional bacteriology tests, for the rapid and reliable detection of halo blight pathogen Pseudomonas savastanoi pv. phaseolicola (Psp collected from infected bean leaves and seeds is described. Psp formed white, small and flat colonies on nutrient agar medium, creamy white, flat and circular on Milk-Tween agar medium and light yellow, convex and shiny on modified sucrose peptone agar medium. Eighteen Gram-negative, catalase-positive and oxidase-negative strains were subjected to nested PCR with primers P 5.1/P 3.1 and P 5.2/P 3.2, which directed the amplification of the 450 bp target DNA fragment in all tested strains. According to the results of DAS- and PTA-ELISA with respect to reactivity to specific antibodies, all analyzed strains belonged to Psp bacterium. Pathogenicity was tested on bean pods and cotyledon leaves, on which greasy spots were formed. Psp did not cause hypersensitive reaction on the leaves of tobacco and geranium. Strains produced levan, fluorescent pigment, oxidative metabolism of glucose, did not reduce nitrate, did not produce indole and H2S, did not hydrolyze starch, gelatin and esculin; they produced acid from glucose, mannose, sucrose and glycerol, and did not produce acid from maltose, starch, esculin, dulcite, sorbitol, inositol and erythritol.

  20. Rapid validated HPTLC method for estimation of betulinic acid in Nelumbo nucifera (Nymphaeaceae) rhizome extract.

    Science.gov (United States)

    Mukherjee, Debajyoti; Kumar, N Satheesh; Khatua, Taraknath; Mukherjee, Pulok K

    2010-01-01

    Betulinic acid (pentacyclic triterpenoid) is an important marker component present in Nelumbo nucifera Gaertn. rhizome. N. nucifera rhizome has several medicinal uses including hypoglycaemic, antidiarrhoeal, antimicrobial, diuretic, antipyretic, psychopharmacological activities. To establish a simple, sensitive, reliable, rapid and validated high-performance thin-layer chromatography method for estimation of betulinic acid in hydro-alcoholic extract of N. nucifera Gaertn. rhizome. The separation was carried out on a thin-layer chromatography aluminium plate pre-coated with silica gel 60F(254) , eluted with chloroform, methanol and formic acid (49 : 1 : 1 v/v). Post chromatographic derivatisation was done with anisaldehyde-sulphuric acid reagent and densitometric scanning was performed using a Camag TLC scanner III, at 420 nm. The system was found to produce a compact spot for betulinic acid (R(f) = 0.30). A good linear precision relationship between the concentrations (2-10 µg) and peak areas were obtained with the correlation coefficient (r) of 0.99698. The limit of detection and limit of quantification of betulinic acid were detected to be 0.4 and 2.30 µg per spot. The percentage of recovery was found to be 98.36%. The percentage relative standard deviations of intra-day and inter-day precisions were 0.82-0.394 and 0.85-0.341, respectively. This validated HPTLC method provides a new and powerful approach to estimate betulinic acid as phytomarker in the extract. Copyright © 2010 John Wiley & Sons, Ltd.

  1. A rapid method for assessing the environmental performance of commercial farms in the Pampas of Argentina.

    Science.gov (United States)

    Viglizzo, E F; Frank, F; Bernardos, J; Buschiazzo, D E; Cabo, S

    2006-06-01

    The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators by users. Different procedures were applied to validate the model and present the results to the users. Regression models (based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas. An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g., through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers.

  2. A novel method for rapidly isolating microbes that suppress soil-borne phytopathogens

    Science.gov (United States)

    Cooper, Sarah; Agnew, Linda; Pereg, Lily

    2016-04-01

    Seedling establishment faces a large number of challenges related to soil physical properties as well as to fungal root diseases. It is extremely difficult to eliminate fungal pathogens from soils where their populations are established due to the persistent nature of their spores and since fumigation of resident fungi is very ineffective in clay-containing soils. Therefore it is necessary to find ways to overcome disease in areas where the soils are infected with fungal phytopathogens. The phenomenon of disease suppressive soils, where the pathogen is present but no disease observed, suggests that microbial antagonism in the soil may lead to the suppression of the growth of fungal pathogens. There are also cases in the literature where soil microorganisms were isolated that suppress the growth of phytopathogens. Antibiosis is one of the most important mechanisms responsible for fungal antagonism, with some significant antifungal compounds involved including antibiotics, volatile organic compounds, hydrogen cyanide and lytic enzymes. Isolation of pathogen-suppressive microorganisms from the soil is time consuming and tedious. We established a simple method for direct isolation of soil microbes (bacteria and fungi) that suppress fungal phytopathogens as well as procedures for confirmation of disease suppression. We will discuss such methods, which were so far tested with the cotton fungal pathogens Thielaviopsis basicola, Verticillium dahliae and Fusarium oxysporum and Verticillium fungicola. We have isolated a diversity of T. basicola-suppressive fungi and bacteria from two vastly different soil types. Identification of the antagonistic isolates revealed that they are a diverse lot, some belong to groups known to be suppressive of a wide range of fungal pathogens, endorsing the power of this technique to rapidly and directly isolate soil-borne microbes antagonistic to a wide variety of fungal pathogens.

  3. A simple and rapid flow cytometric method for detection of porcine cell surface markers.

    Science.gov (United States)

    Stabel, T J; Bolin, S R; Pesch, B A; Rahner, T E

    2000-11-01

    The objective of this study was to develop a rapid and reliable method for flow cytometric analysis of porcine whole blood cells. Fifty-microliters of heparin- or EDTA-treated whole blood was added to wells of a round-bottom 96-well microtitration plate. Each well contained 10 microl of an appropriate dilution of four different antibodies (40 microl total; two primary monoclonal antibodies and two fluorescent-labeled secondary antibodies). For convenience, the antibody mixture could be added to plates 1-2 days prior to assay and stored at 4 degrees C. Once whole blood was added to wells, plates were mixed gently, placed in a sealed bag and incubated in the dark at room temperature for 20 min. Contents of wells were then transferred to polystyrene tubes containing 2 ml of 1.5% formalin in distilled water and mixed gently. Cells were fixed for a minimum of 30 min and then stored in the dark at 4 degrees C until analysis by flow cytometry. Analysis of cell samples may be done up to 3 days after fixation. Results indicate that the percentages of Class I, Class II, CD3, CD8, CD4, CD45, monocyte, gamma-delta T-cell populations, and total number of granulocytes identified using this method were comparable to standard values or to values obtained following separation of white blood cells from red blood cells. The percentage of labeled B-cells was lower than standard values. Total assay time from receipt of blood to acquisition of data by flow cytometry required less than 2 h. This modified assay was shown to be simple, reliable, and useful for screening large numbers of porcine samples in a minimal period of time.

  4. Rapid QM/MM approach for biomolecular systems under periodic boundary conditions: Combination of the density-functional tight-binding theory and particle mesh Ewald method.

    Science.gov (United States)

    Nishizawa, Hiroaki; Okumura, Hisashi

    2016-12-05

    A quantum mechanical/molecular mechanical (QM/MM) approach based on the density-functional tight-binding (DFTB) theory is a useful tool for analyzing chemical reaction systems in detail. In this study, an efficient QM/MM method is developed by the combination of the DFTB/MM and particle mesh Ewald (PME) methods. Because the Fock matrix, which is required in the DFTB calculation, is analytically obtained by the PME method, the Coulomb energy is accurately and rapidly computed. For assessing the performance of this method, DFTB/MM calculations and molecular dynamics simulation are conducted for a system consisting of two amyloid-β(1-16) peptides and a zinc ion in explicit water under periodic boundary conditions. As compared with that of the conventional Ewald summation method, the computational cost of the Coulomb energy by utilizing the present approach is drastically reduced, i.e., 166.5 times faster. Furthermore, the deviation of the electronic energy is less than 10-6 Eh. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  5. A rapid method for detection of five known mutations associated with aminoglycoside-induced deafness.

    Science.gov (United States)

    Bardien, Soraya; Human, Hannique; Harris, Tashneem; Hefke, Gwynneth; Veikondis, Rene; Schaaf, H Simon; van der Merwe, Lize; Greinwald, John H; Fagan, Johan; de Jong, Greetje

    2009-01-13

    South Africa has one of the highest incidences of multidrug-resistant tuberculosis (MDR-TB) in the world. Concomitantly, aminoglycosides are commonly used in this country as a treatment against MDR-TB. To date, at least five mutations are known to confer susceptibility to aminoglycoside-induced hearing loss. The aim of the present study was to develop a rapid screening method to determine whether these mutations are present in the South African population. A multiplex method using the SNaPshot technique was used to screen for five mutations in the MT-RNR1 gene: A1555G, C1494T, T1095C, 961delT+C(n) and A827G. A total of 204 South African control samples, comprising 98 Mixed ancestry and 106 Black individuals were screened for the presence of the five mutations. A robust, cost-effective method was developed that detected the presence of all five sequence variants simultaneously. In this pilot study, the A1555G mutation was identified at a frequency of 0.9% in the Black control samples. The 961delT+C(n) variant was present in 6.6% of the Black controls and 2% of the Mixed ancestry controls. The T1095C, C1494T and A827G variants were not identified in any of the study participants. The frequency of 0.9% for the A1555G mutation in the Black population in South Africa is of concern given the high incidence of MDR-TB in this particular ethnic group. Future larger studies are warranted to determine the true frequencies of the aminoglycoside deafness mutations in the general South African population. The high frequencies of the 961delT+C(n) variant observed in the controls suggest that this change is a common non-pathogenic polymorphism. This genetic method facilitates the identification of individuals at high risk of developing hearing loss prior to the start of aminoglycoside therapy. This is important in a low-resource country like South Africa where, despite their adverse side-effects, aminoglycosides will continue to be used routinely and are accompanied with very

  6. ADVANTAGES OF RAPID METHOD FOR DETERMINING SCALE MASS AND DECARBURIZED LAYER OF ROLLED COIL STEEL

    Directory of Open Access Journals (Sweden)

    E. V. Parusov

    2016-08-01

    Full Text Available Purpose. To determine the universal empirical relationships that allow for operational calculation of scale mass and decarbonized layer depth based on the parameters of the technological process for rolled coil steel production. Methodology. The research is carried out on the industrial batches of the rolled steel of SAE 1006 and SAE 1065 grades. Scale removability was determined in accordance with the procedure of «Bekaert» company by the specifi-cations: GA-03-16, GA-03-18, GS-03-02, GS-06-01. The depth of decarbonized layer was identified in accordance with GOST 1763-68 (M method. Findings. Analysis of experimental data allowed us to determine the rational temperature of coil formation of the investigated steel grades, which provide the best possible removal of scale from the metal surface, a minimal amount of scale, as well as compliance of the metal surface color with the require-ments of European consumers. Originality. The work allowed establishing correlation of the basic quality indicators of the rolled coil high carbon steel (scale mass, depth of decarbonized layer and inter-laminar distance in pearlite with one of the main parameters (coil formation temperature of the deformation and heat treatment mode. The re-sulting regression equations, without metallographic analysis, can be used to determine, with a minimum error, the quantitative values of the total scale mass, depth of decarbonized layer and the average inter-lamellar distance in pearlite of the rolled coil high carbon steel. Practical value. Based on the specifications of «Bekaert» company (GA-03-16, GA-03-18, GS-03-02 and GS-06-01 the method of testing descaling by mechanical means from the surface of the rolled coil steel of low- and high-carbon steel grades was developed and approved in the environment of PJSC «ArcelorMittal Kryvyi Rih». The work resulted in development of the rapid method for determination of total and remaining scale mass on the rolled coil steel

  7. Novel numerical method for calculating the pressure tensor in spherical coordinates for molecular systems.

    Science.gov (United States)

    Nakamura, Takenobu; Shinoda, Wataru; Ikeshoji, Tamio

    2011-09-07

    We propose a novel method for computing the pressure tensor along the radial axis of a molecular system with spherical symmetry. The proposed method uses the slice averaged pressure to improve the numerical stability and precision significantly. Simplified expressions of the local pressure are derived for a conventional molecular force field including non-bond, bond stretching, angle bending, and torsion interactions; these expressions are advantageous in terms of the computational cost. We also discuss an algorithm to avoid numerical singularity. Finally, the method is successfully applied to three different molecular systems, i.e., a water droplet in oil, a spherical micelle, and a liposome. © 2011 American Institute of Physics

  8. Integrating In Silico Prediction Methods, Molecular Docking, and Molecular Dynamics Simulation to Predict the Impact of ALK Missense Mutations in Structural Perspective

    Directory of Open Access Journals (Sweden)

    C. George Priya Doss

    2014-01-01

    Full Text Available Over the past decade, advancements in next generation sequencing technology have placed personalized genomic medicine upon horizon. Understanding the likelihood of disease causing mutations in complex diseases as pathogenic or neutral remains as a major task and even impossible in the structural context because of its time consuming and expensive experiments. Among the various diseases causing mutations, single nucleotide polymorphisms (SNPs play a vital role in defining individual’s susceptibility to disease and drug response. Understanding the genotype-phenotype relationship through SNPs is the first and most important step in drug research and development. Detailed understanding of the effect of SNPs on patient drug response is a key factor in the establishment of personalized medicine. In this paper, we represent a computational pipeline in anaplastic lymphoma kinase (ALK for SNP-centred study by the application of in silico prediction methods, molecular docking, and molecular dynamics simulation approaches. Combination of computational methods provides a way in understanding the impact of deleterious mutations in altering the protein drug targets and eventually leading to variable patient’s drug response. We hope this rapid and cost effective pipeline will also serve as a bridge to connect the clinicians and in silico resources in tailoring treatments to the patients’ specific genotype.

  9. A simple, rapid and efficient method for the extraction of genomic ...

    African Journals Online (AJOL)

    The isolation of intact, high-molecular-mass genomic DNA is essential for many molecular biology applications including long range PCR, endonuclease restriction digestion, southern blot analysis, and genomic library construction. Many protocols are available for the extraction of DNA from plant material, but obtain it is ...

  10. A simple, rapid and efficient method for the extraction of genomic ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-09-01

    Sep 1, 2009 ... The isolation of intact, high-molecular-mass genomic DNA is essential for many molecular biology applications including long range PCR, endonuclease restriction digestion, ... dry subtropics to the boreal zone (Stearn, 1992). Allium roseum L. is a species with a typically Mediterranean dis- tribution.

  11. A Simple and Convenient Method of Multiple Linear Regression to Calculate Iodine Molecular Constants

    Science.gov (United States)

    Cooper, Paul D.

    2010-0