WorldWideScience

Sample records for rapid granular flows

  1. Energy considerations in accelerating rapid shear granular flows

    Directory of Open Access Journals (Sweden)

    S. P. Pudasaini

    2009-05-01

    Full Text Available We present a complete expression for the total energy associated with a rapid frictional granular shear flow down an inclined surface. This expression reduces to the often used energy for a non-accelerating flow of an isotropic, ideal fluid in a horizontal channel, or to the energy for a vertically falling mass. We utilize thickness-averaged mass and momentum conservation laws written in a slope-defined coordinate system. Both the enhanced gravity and friction are taken into account in addition to the bulk motion and deformation. The total energy of the flow at a given spatial position and time is defined as the sum of four energy components: the kinetic energy, gravity, pressure and the friction energy. Total energy is conserved for stationary flow, but for non-stationary flow the non-conservative force induced by the free-surface gradient means that energy is not conserved. Simulations and experimental results are used to sketch the total energy of non-stationary flows. Comparison between the total energy and the sum of the kinetic and pressure energy shows that the contribution due to gravity acceleration and frictional resistance can be of the same order of magnitude, and that the geometric deformation plays an important role in the total energy budget of the cascading mass. Relative importance of the different constituents in the total energy expression is explored. We also introduce an extended Froude number that takes into account the apparent potential energy induced by gravity and pressure.

  2. Experimental and theoretical study of rapid flows of cohesionless granular materials down inclined chutes

    NARCIS (Netherlands)

    Kruyt, N.P.; Verel, W.J.Th.

    1992-01-01

    A theoretical and experimental study is performed of rapid, fully developed flows of cohesionless granular materials down inclined chutes with a rough base. Two flow types are studied in detail: (1) immature sliding flow, where a stagnant zone forms on the base of the chute, and (2) fully developed

  3. Granular flow

    DEFF Research Database (Denmark)

    Mitarai, Namiko; Nakanishi, Hiizu

    2012-01-01

    Granular material is a collection of macroscopic particles that are visible with naked eyes. The non-equilibrium nature of the granular materials makes their rheology quite different from that of molecular systems. In this minireview, we present the unique features of granular materials focusing...

  4. Multiscale modeling of rapid granular flow with a hybrid discrete-continuum method

    CERN Document Server

    Chen, Xizhong; Li, Jinghai

    2015-01-01

    Both discrete and continuum models have been widely used to study rapid granular flow, discrete model is accurate but computationally expensive, whereas continuum model is computationally efficient but its accuracy is doubtful in many situations. Here we propose a hybrid discrete-continuum method to profit from the merits but discard the drawbacks of both discrete and continuum models. Continuum model is used in the regions where it is valid and discrete model is used in the regions where continuum description fails, they are coupled via dynamical exchange of parameters in the overlap regions. Simulation of granular channel flow demonstrates that the proposed hybrid discrete-continuum method is nearly as accurate as discrete model, with much less computational cost.

  5. Ice flow dynamics forced by rapid water pressure variations in subglacial granular beds

    DEFF Research Database (Denmark)

    Damsgaard, Anders; Egholm, David Lundbek; Beem, Lucas H.;

    2016-01-01

    mechanical processes driving transitions from stability to slip. We performed computational experiments that show how rearrangements of load-bearing force chains within the granular sediments drive the mechanical transitions. Cyclic variations in pore water pressure give rise to rate-dependent creeping......Glaciers and ice streams can move by deforming underlying water-saturated sediments, and the nonlinear mechanics of these materials are often invoked as the main reason for initiation, persistence, and shutdown of fast-flowing ice streams. Existing models have failed to fully explain the internal...

  6. The Clustering Instability in Rapid Granular and Gas-Solid Flows

    Science.gov (United States)

    Fullmer, William D.; Hrenya, Christine M.

    2017-01-01

    Flows of solid particles are known to exhibit a clustering instability—dynamic microstructures characterized by a dense region of highly concentrated particles surrounded by a dilute region with relatively few particles—that has no counterpart in molecular fluids. Clustering is pervasive in rapid flows. Its presence impacts momentum, heat, and mass transfer, analogous to how turbulence affects single-phase flows. Yet predicting clustering is challenging, again analogous to the prediction of turbulent flows. In this review, we focus on three key areas: (a) state-of-the-art mathematical tools used to study clustering, with an emphasis on kinetic theory–based continuum models, which are critical to the prediction of the larger systems found in nature and industry, (b) mechanisms that give rise to clustering, most of which are explained via linear stability analyses of kinetic theory–based models, and (c) a critical review of validation studies of kinetic theory–based models to highlight the accuracies and limitations of such theories.

  7. Granular flows : fluidization and anisotropy

    NARCIS (Netherlands)

    Wortel, Gerrit Herman

    2014-01-01

    This work discusses the flow of granular materials (e.g. sand). Even though a single particle is a simple object, the collective behavior of billions of particles can be very complex. In a surprisingly large amount of cases, it is not exactly known how a granular material behaves, and this while the

  8. Modeling Size Polydisperse Granular Flows

    Science.gov (United States)

    Lueptow, Richard M.; Schlick, Conor P.; Isner, Austin B.; Umbanhowar, Paul B.; Ottino, Julio M.

    2014-11-01

    Modeling size segregation of granular materials has important applications in many industrial processes and geophysical phenomena. We have developed a continuum model for granular multi- and polydisperse size segregation based on flow kinematics, which we obtain from discrete element method (DEM) simulations. The segregation depends on dimensionless control parameters that are functions of flow rate, particle sizes, collisional diffusion coefficient, shear rate, and flowing layer depth. To test the theoretical approach, we model segregation in tri-disperse quasi-2D heap flow and log-normally distributed polydisperse quasi-2D chute flow. In both cases, the segregated particle size distributions match results from full-scale DEM simulations and experiments. While the theory was applied to size segregation in steady quasi-2D flows here, the approach can be readily generalized to include additional drivers of segregation such as density and shape as well as other geometries where the flow field can be characterized including rotating tumbler flow and three-dimensional bounded heap flow. Funded by The Dow Chemical Company and NSF Grant CMMI-1000469.

  9. Scales and kinetics of granular flows.

    Science.gov (United States)

    Goldhirsch, I.

    1999-09-01

    When a granular material experiences strong forcing, as may be the case, e.g., for coal or gravel flowing down a chute or snow (or rocks) avalanching down a mountain slope, the individual grains interact by nearly instantaneous collisions, much like in the classical model of a gas. The dissipative nature of the particle collisions renders this analogy incomplete and is the source of a number of phenomena which are peculiar to "granular gases," such as clustering and collapse. In addition, the inelasticity of the collisions is the reason that granular gases, unlike atomic ones, lack temporal and spatial scale separation, a fact manifested by macroscopic mean free paths, scale dependent stresses, "macroscopic measurability" of "microscopic fluctuations" and observability of the effects of the Burnett and super-Burnett "corrections." The latter features may also exist in atomic fluids but they are observable there only under extreme conditions. Clustering, collapse and a kinetic theory for rapid flows of dilute granular systems, including a derivation of boundary conditions, are described alongside the mesoscopic properties of these systems with emphasis on the effects, theoretical conclusions and restrictions imposed by the lack of scale separation. (c) 1999 American Institute of Physics.

  10. Mutiscale Modeling of Segregation in Granular Flows

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Jin [Iowa State Univ., Ames, IA (United States)

    2007-01-01

    Modeling and simulation of segregation phenomena in granular flows are investigated. Computational models at different scales ranging from particle level (microscale) to continuum level (macroscale) are employed in order to determine the important microscale physics relevant to macroscale modeling. The capability of a multi-fluid model to capture segregation caused by density difference is demonstrated by simulating grain-chaff biomass flows in a laboratory-scale air column and in a combine harvester. The multi-fluid model treats gas and solid phases as interpenetrating continua in an Eulerian frame. This model is further improved by incorporating particle rotation using kinetic theory for rapid granular flow of slightly frictional spheres. A simplified model is implemented without changing the current kinetic theory framework by introducing an effective coefficient of restitution to account for additional energy dissipation due to frictional collisions. The accuracy of predicting segregation rate in a gas-fluidized bed is improved by the implementation. This result indicates that particle rotation is important microscopic physics to be incorporated into the hydrodynamic model. Segregation of a large particle in a dense granular bed of small particles under vertical. vibration is studied using molecular dynamics simulations. Wall friction is identified as a necessary condition for the segregation. Large-scale force networks bearing larger-than-average forces are found with the presence of wall friction. The role of force networks in assisting rising of the large particle is analyzed. Single-point force distribution and two-point spatial force correlation are computed. The results show the heterogeneity of forces and a short-range correlation. The short correlation length implies that even dense granular flows may admit local constitutive relations. A modified minimum spanning tree (MST) algorithm is developed to asymptotically recover the force statistics in the

  11. Traffic and Granular Flow ’03

    CERN Document Server

    Luding, Stefan; Bovy, Piet; Schreckenberg, Michael; Wolf, Dietrich

    2005-01-01

    These proceedings are the fifth in the series Traffic and Granular Flow, and we hope they will be as useful a reference as their predecessors. Both the realistic modelling of granular media and traffic flow present important challenges at the borderline between physics and engineering, and enormous progress has been made since 1995, when this series started. Still the research on these topics is thriving, so that this book again contains many new results. Some highlights addressed at this conference were the influence of long range electric and magnetic forces and ambient fluids on granular media, new precise traffic measurements, and experiments on the complex decision making of drivers. No doubt the “hot topics” addressed in granular matter research have diverged from those in traffic since the days when the obvious analogies between traffic jams on highways and dissipative clustering in granular flow intrigued both c- munities alike. However, now just this diversity became a stimulating feature of the ...

  12. DISCRETE AND CONTINUUM MODELLING OF GRANULAR FLOW

    Institute of Scientific and Technical Information of China (English)

    H. P. Zhu; Y. H. WU; A. B. Yu

    2005-01-01

    This paper analyses three popular methods simulating granular flow at different time and length scales:discrete element method (DEM), averaging method and viscous, elastic-plastic continuum model. The theoretical models of these methods and their applications to hopper flows are discussed. It is shown that DEM is an effective method to study the fundamentals of granular flow at a particle or microscopic scale. By use of the continuum approach, granular flow can also be described at a continuum or macroscopic scale. Macroscopic quantities such as velocity and stress can be obtained by use of such computational method as FEM. However, this approach depends on the constitutive relationship of materials and ignores the effect of microscopic structure of granular flow. The combined approach of DEM and averaging method can overcome this problem. The approach takes into account the discrete nature of granular materials and does not require any global assumption and thus allows a better understanding of the fundamental mechanisms of granular flow. However, it is difficult to adapt this approach to process modelling because of the limited number of particles which can be handled with the present computational capacity, and the difficulty in handling non-spherical particles.Further work is needed to develop an appropriate approach to overcome these problems.

  13. Traffic and Granular Flow '11

    CERN Document Server

    Buslaev, Alexander; Bugaev, Alexander; Yashina, Marina; Schadschneider, Andreas; Schreckenberg, Michael; TGF11

    2013-01-01

    This book continues the biannual series of conference proceedings, which has become a classical reference resource in traffic and granular research alike. It addresses new developments at the interface between physics, engineering and computational science. Complex systems, where many simple agents, be they vehicles or particles, give rise to surprising and fascinating phenomena.   The contributions collected in these proceedings cover several research fields, all of which deal with transport. Topics include highway, pedestrian and internet traffic, granular matter, biological transport, transport networks, data acquisition, data analysis and technological applications. Different perspectives, i.e. modeling, simulations, experiments and phenomenological observations, are considered.

  14. 11th Traffic and Granular Flow Conference

    CERN Document Server

    Daamen, Winnie

    2016-01-01

    The Conference on Traffic and Granular Flow brings together international researchers from different fields ranging from physics to computer science and engineering to discuss the latest developments in traffic-related systems. Originally conceived to facilitate new ideas by considering the similarities of traffic and granular flow, TGF'15, organised by Delft University of Technology, now covers a broad range of topics related to driven particle and transport systems. Besides the classical topics of granular flow and highway traffic, its scope includes data transport (Internet traffic), pedestrian and evacuation dynamics, intercellular transport, swarm behaviour and the collective dynamics of other biological systems. Recent advances in modelling, computer simulation and phenomenology are presented, and prospects for applications, for example to traffic control, are discussed. The conference explores the interrelations between the above-mentioned fields and offers the opportunity to stimulate interdisciplinar...

  15. International Workshop on Traffic and Granular Flow

    CERN Document Server

    Herrmann, Hans; Schreckenberg, Michael; Wolf, Dietrich; Social, Traffic and Granular Dynamics

    2000-01-01

    "Are there common phenomena and laws in the dynamic behavior of granular materials, traffic, and socio-economic systems?" The answers given at the international workshop "Traffic and Granular Flow '99" are presented in this volume. From a physical standpoint, all these systems can be treated as (self)-driven many-particle systems with strong fluctuations, showing multistability, phase transitions, non-linear waves, etc. The great interest in these systems is due to several unexpected new discoveries and their practical relevance for solving some fundamental problems of today's societies. This includes intelligent measures for traffic flow optimization and methods from "econophysics" for stabilizing (stock) markets.

  16. Discrete Element Modeling of Complex Granular Flows

    Science.gov (United States)

    Movshovitz, N.; Asphaug, E. I.

    2010-12-01

    Granular materials occur almost everywhere in nature, and are actively studied in many fields of research, from food industry to planetary science. One approach to the study of granular media, the continuum approach, attempts to find a constitutive law that determines the material's flow, or strain, under applied stress. The main difficulty with this approach is that granular systems exhibit different behavior under different conditions, behaving at times as an elastic solid (e.g. pile of sand), at times as a viscous fluid (e.g. when poured), or even as a gas (e.g. when shaken). Even if all these physics are accounted for, numerical implementation is made difficult by the wide and often discontinuous ranges in continuum density and sound speed. A different approach is Discrete Element Modeling (DEM). Here the goal is to directly model every grain in the system as a rigid body subject to various body and surface forces. The advantage of this method is that it treats all of the above regimes in the same way, and can easily deal with a system moving back and forth between regimes. But as a granular system typically contains a multitude of individual grains, the direct integration of the system can be very computationally expensive. For this reason most DEM codes are limited to spherical grains of uniform size. However, spherical grains often cannot replicate the behavior of real world granular systems. A simple pile of spherical grains, for example, relies on static friction alone to keep its shape, while in reality a pile of irregular grains can maintain a much steeper angle by interlocking force chains. In the present study we employ a commercial DEM, nVidia's PhysX Engine, originally designed for the game and animation industry, to simulate complex granular flows with irregular, non-spherical grains. This engine runs as a multi threaded process and can be GPU accelerated. We demonstrate the code's ability to physically model granular materials in the three regimes

  17. Granular flow over inclined channels with constrictions

    Science.gov (United States)

    Tunuguntla, Deepak; Weinhart, Thomas; Thornton, Anthony; Bokhove, Onno

    2013-04-01

    Study of granular flows down inclined channels is essential in understanding the dynamics of natural grain flows like landslides and snow avalanches. As a stepping stone, dry granular flow over an inclined channel with a localised constriction is investigated using both continuum methods and particle simulations. Initially, depth-averaged equations of motion (Savage & Hutter 1989) containing an unknown friction law are considered. The shallow-layer model for granular flows is closed with a friction law obtained from particle simulations of steady flows (Weinhart et al. 2012) undertaken in the open source package Mercury DPM (Mercury 2010). The closed two-dimensional (2D) shallow-layer model is then width-averaged to obtain a novel one-dimensional (1D) model which is an extension of the one for water flows through contraction (Akers & Bokhove 2008). Different flow states are predicted by this novel one-dimensional theory. Flow regimes with distinct flow states are determined as a function of upstream channel Froude number, F, and channel width ratio, Bc. The latter being the ratio of the channel exit width and upstream channel width. Existence of multiple steady states is predicted in a certain regime of F - Bc parameter plane which is in agreement with experiments previously undertaken by (Akers & Bokhove 2008) and for granular flows (Vreman et al. 2007). Furthermore, the 1D model is verified by solving the 2D shallow granular equations using an open source discontinuous Galerkin finite element package hpGEM (Pesch et al. 2007). For supercritical flows i.e. F > 1 the 1D asymptotics holds although the two-dimensional oblique granular jumps largely vary across the converging channel. This computationally efficient closed 1D model is validated by comparing it to the computationally more expensiveaa three-dimensional particle simulations. Finally, we aim to present a quasi-steady particle simulation of inclined flow through two rectangular blocks separated by a gap

  18. Unifying Suspension and Granular flows near Jamming

    Directory of Open Access Journals (Sweden)

    DeGiuli Eric

    2017-01-01

    Full Text Available Rheological properties of dense flows of hard particles are singular as one approaches the jamming threshold where flow ceases, both for granular flows dominated by inertia, and for over-damped suspensions. Concomitantly, the lengthscale characterizing velocity correlations appears to diverge at jamming. Here we review a theoretical framework that gives a scaling description of stationary flows of frictionless particles. Our analysis applies both to suspensions and inertial flows of hard particles. We report numerical results in support of the theory, and show the phase diagram that results when friction is added, delineating the regime of validity of the frictionless theory.

  19. Perfect fluid flow from granular jet impact

    CERN Document Server

    Ellowitz, Jake; Zhang, Wendy W

    2012-01-01

    Experiments on the impact of a densely-packed jet of non-cohesive grains onto a fixed target show that the impact produces an ejecta sheet comprised of particles in collimated motion. The ejecta sheet leaves the target at a well-defined angle whose value agrees quantitatively with the sheet angle produced by water jet impact. Motivated by these experiments, we examine the idealized problem of dense granular jet impact onto a frictionless target in two dimensions. Numerical results for the velocity and pressure fields within the granular jet agree quantitatively with predictions from an exact solution for 2D perfect-fluid impact. This correspondence demonstrates that the continuum limit controlling the coherent collective motion in dense granular impact is Euler flow.

  20. Traffic and Granular Flow ’07

    CERN Document Server

    Chevoir, François; Gondret, Philippe; Lassarre, Sylvain; Lebacque, Jean-Patrick; Schreckenberg, Michael

    2009-01-01

    This book covers several research fields, all of which deal with transport. Three main topics are treated: road traffic, granular matter, and biological transport. Different points of view, i.e. modelling, simulations, experiments, and phenomenological observations, are considered. Sub-topics include: highway or urban vehicular traffic (dynamics of traffic, macro/micro modelling, measurements, data analysis, security issues, psychological issues), pedestrian traffic, animal traffic (e.g. social insects), collective motion in biological systems (molecular motors...), granular flow (dense flows, intermittent flows, solid/liquid transition, jamming, force networks, fluid and solid friction), networks (biological networks, urban traffic, the internet, vulnerability of networks, optimal transport networks) and cellular automata applied to the various aforementioned fields.

  1. Constitutive relations for steady, dense granular flows

    Science.gov (United States)

    Vescovi, D.; Berzi, D.; di Prisco, C. G.

    2011-12-01

    In the recent past, the flow of dense granular materials has been the subject of many scientific works; this is due to the large number of natural phenomena involving solid particles flowing at high concentration (e.g., debris flows and landslides). In contrast with the flow of dilute granular media, where the energy is essentially dissipated in binary collisions, the flow of dense granular materials is characterized by multiple, long-lasting and frictional contacts among the particles. The work focuses on the mechanical response of dry granular materials under steady, simple shear conditions. In particular, the goal is to obtain a complete rheology able to describe the material behavior within the entire range of concentrations for which the flow can be considered dense. The total stress is assumed to be the linear sum of a frictional and a kinetic component. The frictional and the kinetic contribution are modeled in the context of the critical state theory [8, 10] and the kinetic theory of dense granular gases [1, 3, 7], respectively. In the critical state theory, the granular material approaches a certain attractor state, independent on the initial arrangement, characterized by the capability of developing unlimited shear strains without any change in the concentration. Given that a disordered granular packing exists only for a range of concentration between the random loose and close packing [11], a form for the concentration dependence of the frictional normal stress that makes the latter vanish at the random loose packing is defined. In the kinetic theory, the particles are assumed to interact through instantaneous, binary and uncorrelated collisions. A new state variable of the problem is introduced, the granular temperature, which accounts for the velocity fluctuations. The model has been extended to account for the decrease in the energy dissipation due to the existence of correlated motion among the particles [5, 6] and to deal with non

  2. Uphill solitary waves in granular flows

    Science.gov (United States)

    Martínez, E.; Pérez-Penichet, C.; Sotolongo-Costa, O.; Ramos, O.; Måløy, K. J.; Douady, S.; Altshuler, E.

    2007-03-01

    We have experimentally observed uphill solitary waves in the surface flow on a granular material. A heap is constructed by injecting sand between two vertical glass plates separated by a distance much larger than the average grain size, with an open boundary. As the heap reaches the open boundary, solitary fluctuations appear on the flowing layer and move “up the hill” (i.e., against the direction of the flow). We explain the phenomenon in the context of stop-and-go traffic models.

  3. Gravity-driven dense granular flows

    Energy Technology Data Exchange (ETDEWEB)

    ERTAS,DENIZ; GREST,GARY S.; HALSEY,THOMAS C.; DEVINE,DOV; SILBERT,LEONARDO E.

    2000-03-29

    The authors report and analyze the results of numerical studies of dense granular flows in two and three dimensions, using both linear damped springs and Hertzian force laws between particles. Chute flow generically produces a constant density profile that satisfies scaling relations suggestive of a Bagnold grain inertia regime. The type for force law has little impact on the behavior of the system. Failure is not initiated at the surface, consistent with the absence of surface flows and different principal stress directions at vs. below the surface.

  4. A depth integrated model for dry geophysical granular flows

    Science.gov (United States)

    Rossi, Giulia; Armanini, Aronne

    2017-04-01

    Granular flows are rapid to very rapid flows, made up of dry sediment (rock and snow avalanches) or mixture of water and sediment (debris flows). They are among the most dangerous and destructive natural phenomena and the definition of run-out scenarios for risk assessment has received wide interest in the last decades. Nowadays there are many urbanized mountain areas affected by these phenomena, which cause several properties damages and loss of lives. The numerical simulation is a fundamental step to analyze these phenomena and define the runout scenarios. For this reason, a depth-integrated model is developed to analyze the case of dry granular flows, representative of snow avalanches or rock avalanches. The model consists of a two-phase mathematical description of the flow motion: it is similar to the solid transport equations but substantially different since there is no water in this case. A set of partial differential equations is obtained and written in the form of a hyperbolic system. The numerical solution is computed through a path-conservative SPH (Smoothed Particles Hydrodynamics) scheme, in the two dimensional case. Appropriate closure relations are necessary, with respect to the concentration C and the shear stress at the bed τ0. In first approximation, it is possible to derive a formulation for the two closure relations from appropriate rheological models (Bagnold theory and dense gas analogy). The model parameters are determined by means of laboratory tests on dry granular material and the effectiveness of the closure relation verified through a comparison with the experimental results. In particular, the experimental investigation aims to reproduce two case of study for dry granular material: the dam-break test problem and the stationary motion with changes in planimetry. The experiments are carried out in the Hydraulic Laboratory of the University of Trento, by means of channels with variable slope and variable shape. The mathematical model will

  5. Nonlocal modeling of granular flows down inclines.

    Science.gov (United States)

    Kamrin, Ken; Henann, David L

    2015-01-07

    Flows of granular media down a rough inclined plane demonstrate a number of nonlocal phenomena. We apply the recently proposed nonlocal granular fluidity model to this geometry and find that the model captures many of these effects. Utilizing the model's dynamical form, we obtain a formula for the critical stopping height of a layer of grains on an inclined surface. Using an existing parameter calibration for glass beads, the theoretical result compares quantitatively to existing experimental data for glass beads. This provides a stringent test of the model, whose previous validations focused on driven steady-flow problems. For layers thicker than the stopping height, the theoretical flow profiles display a thickness-dependent shape whose features are in agreement with previous discrete particle simulations. We also address the issue of the Froude number of the flows, which has been shown experimentally to collapse as a function of the ratio of layer thickness to stopping height. While the collapse is not obvious, two explanations emerge leading to a revisiting of the history of inertial rheology, which the nonlocal model references for its homogeneous flow response.

  6. Longitudinal Viscous Flow in Granular Gases

    OpenAIRE

    Santos, Andres

    2008-01-01

    The flow characterized by a linear longitudinal velocity field $u_x(x,t)=a(t)x$, where $a(t)={a_0}/({1+a_0t})$, a uniform density $n(t)\\propto a(t)$, and a uniform temperature $T(t)$ is analyzed for dilute granular gases by means of a BGK-like model kinetic equation in $d$ dimensions. For a given value of the coefficient of normal restitution $\\alpha$, the relevant control parameter of the problem is the reduced deformation rate $a^*(t)=a(t)/\

  7. Flow and segregation in sheared granular slurries

    Science.gov (United States)

    Barentin, C.; Azanza, E.; Pouligny, B.

    2004-04-01

    We study the behaviour of a granular slurry, i.e., a very concentrated suspension of heavy (denser than the fluid) and polydisperse particles sheared between two parallel-plane circular disks. For small gaps, the slurry behaves as a 2d system with a characteristic radial size segregation of particles. For large gaps, the slurry responds as a 3d system, with considerable vertical segregation and a concomitant 2-phase (fluid, solid) flow structure. The thickness ζ of the fluid phase is the 2d-3d gap crossover. Surprisingly, ζ is found to be nearly unaffected by very large changes in the particle size distribution.

  8. A hydrodynamic model for granular material flows including segregation effects

    Science.gov (United States)

    Gilberg, Dominik; Klar, Axel; Steiner, Konrad

    2017-06-01

    The simulation of granular flows including segregation effects in large industrial processes using particle methods is accurate, but very time-consuming. To overcome the long computation times a macroscopic model is a natural choice. Therefore, we couple a mixture theory based segregation model to a hydrodynamic model of Navier-Stokes-type, describing the flow behavior of the granular material. The granular flow model is a hybrid model derived from kinetic theory and a soil mechanical approach to cover the regime of fast dilute flow, as well as slow dense flow, where the density of the granular material is close to the maximum packing density. Originally, the segregation model has been formulated by Thornton and Gray for idealized avalanches. It is modified and adapted to be in the preferred form for the coupling. In the final coupled model the segregation process depends on the local state of the granular system. On the other hand, the granular system changes as differently mixed regions of the granular material differ i.e. in the packing density. For the modeling process the focus lies on dry granular material flows of two particle types differing only in size but can be easily extended to arbitrary granular mixtures of different particle size and density. To solve the coupled system a finite volume approach is used. To test the model the rotational mixing of small and large particles in a tumbler is simulated.

  9. Viscoinertial regime of immersed granular flows

    Science.gov (United States)

    Amarsid, L.; Delenne, J.-Y.; Mutabaruka, P.; Monerie, Y.; Perales, F.; Radjai, F.

    2017-07-01

    By means of extensive coupled molecular dynamics-lattice Boltzmann simulations, accounting for grain dynamics and subparticle resolution of the fluid phase, we analyze steady inertial granular flows sheared by a viscous fluid. We show that, for a broad range of system parameters (shear rate, confining stress, fluid viscosity, and relative fluid-grain density), the frictional strength and packing fraction can be described by a modified inertial number incorporating the fluid effect. In a dual viscous description, the effective viscosity diverges as the inverse square of the difference between the packing fraction and its jamming value, as observed in experiments. We also find that the fabric and force anisotropies extracted from the contact network are well described by the modified inertial number, thus providing clear evidence for the role of these key structural parameters in dense suspensions.

  10. Mechanics of coupled granular/fluid flows

    Science.gov (United States)

    Vinningland, J.; Toussaint, R.; Johnsen, O.; Flekkoy, E. G.; Maloy, K. J.

    2006-12-01

    We introduce a hybrid numerical model for coupled flow of solid grains and intersticial fluid, which renders for complex hydrodynamic interactions between mobile grains. This model treats the solid phase as discrete particles, interacting mechanically with the other particles and with the intersticial flowing fluid. The fluid is described by continuum equations rendering for its advection by the local grains, superposed to a pressure diffusion ruled by a Darcy flow with a permeability depending on the local solid fraction. This model is aimed at describing accurately such coupled flow. This model is tested for two model situations, where it is compared to experimental results: 1/ Injection of a localized overpressure in a grain/fluid filled cell lying horizontally, where gravity is unimportant. 2/ Sedimentation of heavy grains falling into an initially grain-free fluid region. The development of pattern-forming instabilities is obtained in these two situations, corresponding to granular/fluid equivalents of the two-fluids Saffman-Taylor and Rayleigh-Taylor instabilities. Numerical and experimental results are shown to be consistent with each other.

  11. Increasing granular flow rate with obstructions

    Directory of Open Access Journals (Sweden)

    Alan Murray

    2016-03-01

    Full Text Available We describe a simple experiment involving spheres rolling down an inclined plane towards a bottleneck and through a gap. Results of the experiment indicate that flow rate can be increased by placing an obstruction at optimal positions near the bottleneck. We use the experiment to develop a computer simulation using the PhysX physics engine. Simulations confirm the experimental results and we state several considerations necessary to obtain a model that agrees well with experiment. We demonstrate that the model exhibits clogging, intermittent and continuous flow, and that it can be used as a tool for further investigations in granular flow. Received: 22 November 2015, Accepted: 19 February 2016; Edited by: L. A. Pugnaloni; Reviewed by: C. M. Carlevaro, Instituto de Física de Líquidos y Sistemas Biológicos, La Plata, Argentina; DOI: http://dx.doi.org/10.4279/PIP.080003 Cite as: A Murray, F Alonso-Marroquin, Papers in Physics 8, 080003 (2016

  12. Modeling density segregation in granular flow

    Science.gov (United States)

    Xiao, Hongyi; Lueptow, Richard; Umbanhowar, Paul

    2015-11-01

    A recently developed continuum-based model accurately predicts segregation in flows of granular mixtures varying in particle size by considering the interplay of advection, diffusion and segregation. In this research, we extend the domain of the model to include density driven segregation. Discrete Element Method (DEM) simulations of density bidisperse flows of mono-sized particles in a quasi-2D bounded heap were performed to determine the dependence of the density driven segregation velocity on local shear rate, particle concentration, and a segregation length which scales with the particle size and the logarithm of the density ratio. With these inputs, the model yields theoretical predictions of density segregation patterns that quantitatively match the DEM simulations over a range of density ratios (1.11-3.33) and flow rates (19.2-113.6 cm3/s). Matching experiments with various combinations of glass, steel and ceramic particles were also performed which reproduced the segregation patterns obtained in both the simulations and the theory.

  13. Numerical modeling of geophysical granular flows: 1. A comprehensive approach to granular rheologies and geophysical multiphase flows

    Science.gov (United States)

    Dartevelle, SéBastien

    2004-08-01

    Geophysical granular materials display a wide variety of behaviors and features. Typically, granular flows (1) are multiphase flows, (2) are very dissipative over many different scales, (3) display a wide range of grain concentrations, and (4), as a final result of these previous features, display complex nonlinear, nonuniform, and unsteady rheologies. Therefore the objectives of this manuscript are twofold: (1) setting up a hydrodynamic model which acknowledges the multiphase nature of granular flows and (2) defining a comprehensive rheological model which accounts for all the different forms of viscous dissipations within granular flows at any concentration. Hence three important regimes within granular flows must be acknowledged: kinetic (pure free flights of grain), kinetic-collisional, and frictional. The momentum and energy transfer will be different according to the granular regimes, i.e., strain rate dependent in the kinetic and kinetic-collisional cases and strain rate independent in the frictional case. A "universal" granular rheological model requires a comprehensive unified stress tensor able to adequately describe viscous stress within the flow for any of these regimes, and without imposing a priori what regime will dominate over the others. The kinetic-collisional viscous regime is defined from a modified Boltzmann's kinetic theory of dense gas. The frictional viscous regime is defined from the plastic potential and the critical state theories which account for compressibility of granular matter (e.g., dilatancy, consolidation, and critical state). In the companion paper [, 2004] we will introduce a multiphase computer code, (G)MFIX, which accounts for all the granular regimes and rheology and present typical simulations of diluted (e.g., plinian clouds) and concentrated geophysical granular flows (i.e., pyroclastic flows and surges).

  14. Closure relations for shallow granular flows from particle simulations

    NARCIS (Netherlands)

    Weinhart, Thomas; Thornton, Anthony Richard; Luding, Stefan; Bokhove, Onno

    The Discrete Particle Method (DPM) is used to model granular flows down an inclined chute. We observe three major regimes: static piles, steady uniform flows and accelerating flows. For flows over a smooth base, other (quasi-steady) regimes are observed where the flow is either highly energetic and

  15. Granular flow over inclined channels with linear contraction

    CERN Document Server

    Tunuguntla, D R; Thornton, A R; Bokhove, O

    2015-01-01

    We consider dry granular flow down an inclined chute with a localised contraction theoretically and numerically. The flow regimes are predicted through a novel extended one-dimensional hydraulic theory. A discrete particle method validated empirical constitutive law is used to close this one-dimensional asymptotic model. The one-dimensional model is verified by solving the two-dimensional shallow granular equations through discontinuous Galerkin finite element method (DGFEM). For supercritical flows, the one-dimensional asymptotic theory surprisingly holds although the two-dimensional oblique granular jumps largely vary across the converging channel.

  16. Rapid penetration into granular media visualizing the fundamental physics of rapid earth penetration

    CERN Document Server

    Iskander, Magued

    2015-01-01

    Rapid Penetration into Granular Media: Visualizing the Fundamental Physics of Rapid Earth Penetration introduces readers to the variety of methods and techniques used to visualize, observe, and model the rapid penetration of natural and man-made projectiles into earth materials. It provides seasoned practitioners with a standard reference that showcases the topic's most recent developments in research and application. The text compiles the findings of new research developments on the subject, outlines the fundamental physics of rapid penetration into granular media, and assembles a com

  17. Non-Steady Oscillatory Flow in Coarse Granular Materials

    DEFF Research Database (Denmark)

    Andersen, O. H.; Gent, M. R. A. van; Meer, J. W. van der;

    1992-01-01

    Stationary and oscillatory flow through coarse granular materials have been investigated experimentally at Delft Hydraulics in their oscillating water tunnel with the objective of determining the coefficients of the extended Forchheimer equation. Cylinders, spheres and different types of rock hav...

  18. Hydrodynamic modeling of granular flows in a modified Couette cell.

    Science.gov (United States)

    Jop, Pierre

    2008-03-01

    We present simulations of granular flows in a modified Couette cell, using a continuum model recently proposed for dense granular flows. Based on a friction coefficient, which depends on an inertial number, the model captures the positions of the wide shear bands. We show that a smooth transition in velocity-profile shape occurs when the height of the granular material is increased, leading to a differential rotation of the central part close to the surface. The numerical predictions are in qualitative agreement with previous experimental results. The model provides predictions for the increase of the shear band width when the rotation rate is increased.

  19. Continuum modeling of rate-dependent granular flows in SPH

    Science.gov (United States)

    Hurley, Ryan C.; Andrade, José E.

    2016-09-01

    We discuss a constitutive law for modeling rate-dependent granular flows that has been implemented in smoothed particle hydrodynamics (SPH). We model granular materials using a viscoplastic constitutive law that produces a Drucker-Prager-like yield condition in the limit of vanishing flow. A friction law for non-steady flows, incorporating rate-dependence and dilation, is derived and implemented within the constitutive law. We compare our SPH simulations with experimental data, demonstrating that they can capture both steady and non-steady dynamic flow behavior, notably including transient column collapse profiles. This technique may therefore be attractive for modeling the time-dependent evolution of natural and industrial flows.

  20. An experimental study of the elastic theory for granular flows

    Science.gov (United States)

    Guo, Tongtong; Campbell, Charles S.

    2016-08-01

    This paper reports annular shear cell measurements granular flows with an eye towards experimentally confirming the flow regimes laid out in the elastic theory of granular flow. Tests were carried out on four different kinds of plastic spherical particles under both constant volume flows and constant applied stress flows. In particular, observations were made of the new regime in that model, the elastic-inertial regime, and the predicted transitions between the elastic-inertial and both the elastic-quasistatic and pure inertial regimes.

  1. Continuum modeling of rate-dependent granular flows in SPH

    Science.gov (United States)

    Hurley, Ryan C.; Andrade, José E.

    2017-01-01

    We discuss a constitutive law for modeling rate-dependent granular flows that has been implemented in smoothed particle hydrodynamics (SPH). We model granular materials using a viscoplastic constitutive law that produces a Drucker-Prager-like yield condition in the limit of vanishing flow. A friction law for non-steady flows, incorporating rate-dependence and dilation, is derived and implemented within the constitutive law. We compare our SPH simulations with experimental data, demonstrating that they can capture both steady and non-steady dynamic flow behavior, notably including transient column collapse profiles. This technique may therefore be attractive for modeling the time-dependent evolution of natural and industrial flows.

  2. A particle-based method for granular flow simulation

    KAUST Repository

    Chang, Yuanzhang

    2012-03-16

    We present a new particle-based method for granular flow simulation. In the method, a new elastic stress term, which is derived from a modified form of the Hooke\\'s law, is included in the momentum governing equation to handle the friction of granular materials. Viscosity force is also added to simulate the dynamic friction for the purpose of smoothing the velocity field and further maintaining the simulation stability. Benefiting from the Lagrangian nature of the SPH method, large flow deformation can be well handled easily and naturally. In addition, a signed distance field is also employed to enforce the solid boundary condition. The experimental results show that the proposed method is effective and efficient for handling the flow of granular materials, and different kinds of granular behaviors can be well simulated by adjusting just one parameter. © 2012 Science China Press and Springer-Verlag Berlin Heidelberg.

  3. Flow of Dense Granular Media; A Peculiar Liquid

    Science.gov (United States)

    Pouliquen, Olivier

    2007-11-01

    Rice flowing out of a silo, rocks tumbling down a slope, sand avalanching on a dune, are examples of simple granular flows. Their description still represents a challenge due to the lack of constitutive laws able to describe the rich phenomenology observed with granular materials. However, the numerous experiments and simulations carried out during the last ten years have given keys for a better understanding. This talk will review the general properties of granular flows, before focusing on the dense flow regime where granular media flow like a liquid. In this regime, simple constitutive laws can be proposed, in which the granular fluid is described as a peculiar visco-plastic liquid. This talk will show that this approach gives quantitative predictions in several configurations, providing a relevant framework for adressing granular hydrodynamic problems. The second part of this presentation will discuss the limits of this approach, the important open problems, and the consequences of this development for the more complex case of mixture of grains and fluid. This work has been done with Pierre Jop, Yoel Forterre and Mickael Paihla.

  4. Energy-Consistent Multiscale Algorithms for Granular Flows

    Science.gov (United States)

    2014-08-07

    8-98) v Prescribed by ANSI Std. Z39.18 30-07-2014 Final 01-MAY-2011 - 30-APR-2014 AFOSR YIP Energy-Consistent Multiscale Algorithms for Granular...document the achievements made as a result of this Young Investigator Program ( YIP ) project. We worked on the development of multi scale energy... YIP ) project. We worked on the development of multi scale energy-consistent algorithms to simulate and capture flow phenomena in granular

  5. Swirling flows in horizontally vibrated beds of dense granular materials

    Institute of Scientific and Technical Information of China (English)

    Ali Bakhshinejad; Piroz Zamankhan

    2012-01-01

    In a series of experiments,a granular material in a rectangular container with two hollow cylinders was studied as it underwent horizontal vibrations.At the peak values of acceleration,novel swirling granular flows were observed in the cylinders while the grains cascaded down the outer surface of the piles that formed outside the cylinders.Computer simulations were performed that supported our interpretation of the behaviour observed in the experiments.

  6. The behaviour of free-flowing granular intruders

    Directory of Open Access Journals (Sweden)

    Wyburn Edward

    2017-01-01

    Full Text Available Particle shape affects both the quasi-static and dynamic behaviour of granular media. There has been significant research devoted to the flowability of systems of irregularly shaped particles, as well as the flow of grains around fixed intruders, however the behaviour of free flowing intruders within granular flows remains comparatively unexplored. Here, the effect of the shape of these intruder particles is studied, looking at the kinematic behaviour of the intruders and in particular their tendency of orientation. Experiments are carried out within the Stadium Shear Device, which is a novel apparatus able to continuously apply simple shear conditions to two-dimensional grain analogues. It is found that the intruder shows different behaviour to that of the bulk flow, and that this behaviour is strongly shape dependent. These insights could lead to the development of admixtures that alter the flowability of granular materials.

  7. How granular vortices can help understanding rheological and mixing properties of dense granular flows

    Directory of Open Access Journals (Sweden)

    Rognon Pierre

    2017-01-01

    Full Text Available Dense granular flows exhibit fascinating kinematic patterns characterised by strong fluctuations in grain velocities. In this paper, we analyse these fluctuations and discuss their possible role on macroscopic properties such as effective viscosity, non-locality and shear-induced diffusion. The analysis is based on 2D experimental granular flows performed with the stadium shear device and DEM simulations. We first show that, when subjected to shear, grains self-organised into clusters rotating like rigid bodies. The average size of these so-called granular vortices is found to increase and diverge for lower inertial numbers, when flows decelerate and stop. We then discuss how such a microstructural entity and its associated internal length scale, possibly much larger than a grain, may be used to explain two important properties of dense granular flows: (i the existence of shear-induced diffusion of grains characterised by a shear-rate independent diffusivity and (ii the development of boundary layers near walls, where the viscosity is seemingly lower than the viscosity far from walls.

  8. Destabilization of confined granular packings due to fluid flow

    Science.gov (United States)

    Monloubou, Martin; Sandnes, Bjørnar

    2016-04-01

    Fluid flow through granular materials can cause fluidization when fluid drag exceeds the frictional stress within the packing. Fluid driven failure of granular packings is observed in both natural and engineered settings, e.g. soil liquefaction and flowback of proppants during hydraulic fracturing operations. We study experimentally the destabilization and flow of an unconsolidated granular packing subjected to a point source fluid withdrawal using a model system consisting of a vertical Hele-Shaw cell containing a water-grain mixture. The fluid is withdrawn from the cell at a constant rate, and the emerging flow patterns are imaged in time-lapse mode. Using Particle Image Velocimetry (PIV), we show that the granular flow gets localized in a narrow channel down the center of the cell, and adopts a Gaussian velocity profile similar to those observed in dry grain flows in silos. We investigate the effects of the experimental parameters (flow rate, grain size, grain shape, fluid viscosity) on the packing destabilization, and identify the physical mechanisms responsible for the observed complex flow behaviour.

  9. Constitutive model development for flows of granular materials

    Science.gov (United States)

    Chialvo, Sebastian

    Granular flows are ubiquitous in both natural and industrial processes. When com- posed of dry, noncohesive particles, they manifest three different flow regimes---commonly referred to as the quasistatic, inertial, and intermediate regimes---each of which exhibits its own dependences on solids volume fraction, shear rate, and particle-level properties. The differences in these regimes can be attributed to microscale phenomena, with quasistatic flows being dominated by enduring, frictional contacts between grains, inertial flows by grain collisions, and intermediate flows by a combination of the two. Existing constitutive models for the solids-phase stress tend to focus on one or two regimes at a time, with a limited degree of success; the same is true of models for wall-boundary conditions for granular flows. Moreover, these models tend not to be based on detailed particle-level flow data, either from experiment or simulation. Clearly, a comprehensive modeling framework is lacking. The work in this thesis aims to address these issues by proposing continuum models constructed on the basis of discrete element method (DEM) simulations of granular shear flows. Specifically, we propose (a) a constitutive stress model that bridges the three dense flow regimes, (b) an modified kinetic-theory model that covers both the dense and dilute ends of the inertial regime, and (c) a boundary-condition model for dense, wall-bounded flows. These models facilitate the modeling of a wide range of flow systems of practical interest and provide ideas for further model development and refinement.

  10. Assessing continuum postulates in simulations of granular flow

    Energy Technology Data Exchange (ETDEWEB)

    Rycroft, Chris; Kamrin, Ken; Bazant, Martin

    2008-08-26

    Continuum mechanics relies on the fundamental notion of a mesoscopic volume"element" in which properties averaged over discrete particles obey deterministic relationships. Recent work on granular materials suggests a continuum law may be inapplicable, revealing inhomogeneities at the particle level, such as force chains and slow cage breaking. Here, we analyze large-scale three-dimensional Discrete-Element Method (DEM) simulations of different granular flows and show that an approximate"granular element" defined at the scale of observed dynamical correlations (roughly three to five particle diameters) has a reasonable continuum interpretation. By viewing all the simulations as an ensemble of granular elements which deform and move with the flow, we can track material evolution at a local level. Our results confirm some of the hypotheses of classical plasticity theory while contradicting others and suggest a subtle physical picture of granular failure, combining liquid-like dependence on deformation rate and solid-like dependence on strain. Our computational methods and results can be used to guide the development of more realistic continuum models, based on observed local relationships betweenaverage variables.

  11. A Fractal Model for the Effective Thermal Conductivity of Granular Flow with Non-uniform Particles

    Institute of Scientific and Technical Information of China (English)

    ZHANG Duan-Ming; LEI Ya-Jie; YU Bo-Ming; ZHANG Mei-Jun; HUANG Ming-Tao; LI Zhi-Hua; GUAN Li

    2002-01-01

    The equipartition of energy applied in binary mixture of granular flow is extended to granular flow withnon-uniform particles. Based on the fractal characteristic of granular flow with non-uniform particles as well as energyequipartition, a fractal velocity distribution function and a fractal model of effective thermal conductivity are derived.Thermal conduction resulted from motions of particles in the granular flow, as well as the effect of fractal dimension oneffective thermal conductivity, is discussed.

  12. The granular silo as a continuum plastic flow: the hour-glass vs the clepsydra

    CERN Document Server

    Staron, Lydie; Popinet, Stéphane; 10.1063/1.4757390

    2012-01-01

    The granular silo is one of the many interesting illustrations of the thixotropic property of granular matter: a rapid flow develops at the outlet, propagating upwards through a dense shear flow while material at the bottom corners of the container remains static. For large enough outlets, the discharge flow is continuous; however, by contrast with the clepsydra for which the flow velocity depends on the height of fluid left in the container, the discharge rate of granular silos is constant. Implementing a plastic rheology in a 2D Navier-Stokes solver (following the mu(I)-rheology or a constant friction), we simulate the continuum counterpart of the granular silo. Doing so, we obtain a constant flow rate during the discharge and recover the Beverloo scaling independently of the initial filling height of the silo. We show that lowering the value of the coefficient of friction leads to a transition toward a different behavior, similar to that of a viscous fluid, and where the filling height becomes active in th...

  13. The granular silo as a continuum plastic flow: The hour-glass vs the clepsydra

    Science.gov (United States)

    Staron, L.; Lagrée, P.-Y.; Popinet, S.

    2012-10-01

    The granular silo is one of the many interesting illustrations of the thixotropic property of granular matter: a rapid flow develops at the outlet, propagating upwards through a dense shear flow while material at the bottom corners of the container remains static. For large enough outlets, the discharge flow is continuous; however, by contrast with the clepsydra for which the flow velocity depends on the height of fluid left in the container, the discharge rate of granular silos is constant. Implementing a plastic rheology in a 2D Navier-Stokes solver (following the μ(I)-rheology or a constant friction), we simulate the continuum counterpart of the granular silo. Doing so, we obtain a constant flow rate during the discharge and recover the Beverloo scaling independently of the initial filling height of the silo. We show that lowering the value of the coefficient of friction leads to a transition toward a different behavior, similar to that of a viscous fluid, and where the filling height becomes active in the discharge process. The pressure field shows that large enough values of the coefficient of friction (≃0.3) allow for a low-pressure cavity to form above the outlet, and can thus explain the Beverloo scaling. In conclusion, the difference between the discharge of a hourglass and a clepsydra seems to reside in the existence or not of a plastic yield stress.

  14. Injected power and entropy flow in a heated granular gas

    Science.gov (United States)

    Visco, P.; Puglisi, A.; Barrat, A.; Trizac, E.; van Wijland, F.

    2005-10-01

    Our interest goes to the power injected in a heated granular gas and to the possibility to interpret it in terms of entropy flow. We numerically determine the distribution of the injected power by means of Monte Carlo simulations. Then, we provide a kinetic-theory approach to the computation of such a distribution function. Finally, after showing why the injected power does not satisfy a fluctuation relation à la Gallavotti-Cohen, we put forward a new quantity which does fulfill such a relation, and is not only applicable in a variety of frameworks outside the granular world, but also experimentally accessible.

  15. Shock front width and structure in supersonic granular flows.

    Science.gov (United States)

    Boudet, J F; Amarouchene, Y; Kellay, H

    2008-12-19

    The full structure of a shock front around a blunt body in a quasi-two-dimensional granular flow is studied. Two features, a large density gradient and a very small thickness of the front, characterize this shock and make it different from shocks in molecular gases. Both of these features can be understood using a modified version of the granular kinetic theory. Our model separates the particles into two subpopulations: fast particles having experienced no collisions and randomly moving particles. This separation is motivated by direct measurements of the particle velocities which show a bimodal distribution. Our results not only shed new light on the use of the granular kinetic theory under extreme conditions (shock formation) but bring new insight into the physics of shocks in general.

  16. Stress transmission and incipient yield flow in dense granular materials

    Science.gov (United States)

    Blumenfeld, Raphael

    2010-05-01

    Jammed granular matter transmits stresses non-uniformly like no conventional solid, especially when it is on the verge of failure. Jamming is caused by self-organization of granular matter under external loads, often giving rise to networks of force chains that support the loads non-uniformly. An ongoing debate in the literature concerns the correct way to model the static stress field in such media: good old elasticity theory or newcomer isostaticity theory. The two differ significantly and, in particular in 2D, isostaticity theory leads naturally to force chain solutions. More recently, it has been proposed that real granular materials are made of mixtures of regions, some behaving elastically and some isostatically. The theory to describe these systems has been named stato-elasticity. In this paper, I first present the rationale for stato-elasticity theory. An important step towards the construction of this theory is a good understanding of stress transmission in the regions of pure isostatic states. A brief description is given of recently derived general solutions for 2D isostatic regions with nonuniform structures, which go well beyond the over-simplistic picture of force chains. I then show how the static stress equations are related directly to incipient yield flow and derive the equations that govern yield and creep rheology of dense granular matter at the initial stages of failure. These equations are general and describe strains in granular materials of both rigid and compliant particles.

  17. DEM simulation of granular flows in a centrifugal acceleration field

    Science.gov (United States)

    Cabrera, Miguel Angel; Peng, Chong; Wu, Wei

    2017-04-01

    The main purpose of mass-flow experimental models is abstracting distinctive features of natural granular flows, and allow its systematic study in the laboratory. In this process, particle size, space, time, and stress scales must be considered for the proper representation of specific phenomena [5]. One of the most challenging tasks in small scale models, is matching the range of stresses and strains among the particle and fluid media observed in a field event. Centrifuge modelling offers an alternative to upscale all gravity-driven processes, and it has been recently employed in the simulation of granular flows [1, 2, 3, 6, 7]. Centrifuge scaling principles are presented in Ref. [4], collecting a wide spectrum of static and dynamic models. However, for the case of kinematic processes, the non-uniformity of the centrifugal acceleration field plays a major role (i.e., Coriolis and inertial effects). In this work, we discuss a general formulation for the centrifugal acceleration field, implemented in a discrete element model framework (DEM), and validated with centrifuge experimental results. Conventional DEM simulations relate the volumetric forces as a function of the gravitational force Gp = mpg. However, in the local coordinate system of a rotating centrifuge model, the cylindrical centrifugal acceleration field needs to be included. In this rotating system, the centrifugal acceleration of a particle depends on the rotating speed of the centrifuge, as well as the position and speed of the particle in the rotating model. Therefore, we obtain the formulation of centrifugal acceleration field by coordinate transformation. The numerical model is validated with a series of centrifuge experiments of monodispersed glass beads, flowing down an inclined plane at different acceleration levels and slope angles. Further discussion leads to the numerical parameterization necessary for simulating equivalent granular flows under an augmented acceleration field. The premise of

  18. Characterization of granular flows from the generated seismic signal

    Science.gov (United States)

    Farin, Maxime; Mangeney, Anne; Toussaint, Renaud; De Rosny, Julien; Trinh, Phuong-Thu

    2016-04-01

    Landslides, rock avalanche and debris flows represent a major natural hazard in steep landscapes. Recent studies showed that the seismic signal generated by these events can provide quantitative information on their location and amplitude. However, owing to the lack of visual observations, the dynamics of gravitational events is still not well understood. A burning challenge is to establish relations between the characteristics of the landslide (volume, speed, runout distance,...) and that of the emitted seismic signal (maximum amplitude, seismic energy, frequencies,...). We present here laboratory experiments of granular columns collapse on an inclined plane. The seismic signal generated by the collapse is recorded by piezoelectric accelerometers sensitive in a wide frequency range (1 Hz - 56 kHz). The granular column is made of steel beads of the same diameter, between 1 mm and 3 mm that are initially contained in a cylinder. The column collapses when the cylinder is removed. A layer of steel beads is glued on the surface of the plane to provide basal roughness. For horizontal granular flows, we show that it is possible to distinguish the phases of acceleration and deceleration of the flow in the emitted seismic signal. Indeed, the signal envelope is symmetrical with respect to its maximum, separating the acceleration from the deceleration. When the slope angle increases, we observe that the signal envelope looses its symmetry: it stays unchanged during the acceleration but it is significantly extended during the deceleration. In addition, we propose a semi-empirical scaling law to describe the increase of the elastic energy radiated by a granular flow when the slope angle increases. The fit of this law with the seismic data allows us to retrieve the friction angle of the granular material, which is a crucial rheological parameter. Finally, we show that the ratio of the radiated elastic energy over the potential energy lost of granular flows, i.e. their seismic

  19. Discharge flow of a bidisperse granular media from a silo

    Science.gov (United States)

    Benyamine, M.; Djermane, M.; Dalloz-Dubrujeaud, B.; Aussillous, P.

    2014-09-01

    The discharge flow in a cylindrical and a rectangular silo using both monodisperse and bidisperse mixtures of spherical glass beads is studied experimentally. The flow rate is measured using a precision balance for a large range of particle diameters, size ratios, and outlet diameters. A simple physical model is proposed to describe the flow of bidisperse mixtures. It gives an expression for the flow rate and predicts that the bulk velocity follows a simple mixture law. This model implies that a mixture diameter cannot be simply defined. Moreover it is shown that bidisperse granular media allow for the transport of coarse particles below their jamming conditions.

  20. Numerical investigation of granular flow in a shear cell

    Science.gov (United States)

    Wang, X.; Zhu, H. P.; Yu, A. B.; Luding, S.

    2013-06-01

    Granular flow in a shear cell under conditions relevant to those in an annular cell is investigated based on the results obtained by using the Discrete Element Method. The distributions of porosity and coordination number are studied, and the relationship of these variables is established. The so-called I-rheology proposed by Jop et al. [Nature (London) 441, 727 (2006)] is tested. The results display that the I-rheology can effectively describe the intermediate flow regime, whereas significant deviations take place when it is applied to the quasi-static regime. The correlations between stresses and packing fraction are examined and the packing fraction values for the quasi-static/intermediate and intermediate/inertial regime transitions are identified. The force networks/structures for different scaled stiffness are analyzed to further understand the regime-transitions for the granular flow.

  1. Strange eigenmodes of chaotic granular flow in a tumbler

    Science.gov (United States)

    Christov, Ivan C.; Ottino, Julio M.; Lueptow, Richard M.

    2011-11-01

    Through a combined computational-experimental study of monodisperse granular flow in a slowly-rotating quasi-two-dimensional container we show the presence of naturally-persistent mixing patterns, i.e., ``strange'' eigenmodes of the advection- diffusion operator governing the mixing process in the Eulerian frame. A comparative analysis of the structure of eigenmodes and the corresponding Poincaré section and finite-time Lyapunov exponent field of the flow highlights the relationship between the Eulerian and Lagrangian descriptions of mixing. In addition, we show how the mapping method for scalar transport can be modified to include diffusive effects, which are more significant in a granular flow (in laboratory size equipment) than in a similar fluid flow. This allow us to examine (for the first time in a granular flow) the change in shape, lifespan, and eventual decay of eigenmodes due to diffusive effects at larger numbers of revolutions. Finally, it is shown that segregation patterns in bidisperse mixtures correspond to permanently-excited eigenmodes. This work was supported, in part, by NSF Grant CMMI-1000469.

  2. Instabilities in granular gas–solid flows

    Science.gov (United States)

    Gómez González, Rubén; Garzó, Vicente

    2017-04-01

    A linear stability analysis of the hydrodynamic equations with respect to the homogeneous cooling state is performed to study the conditions for stability of a suspension of solid particles immersed in a viscous gas. The dissipation in such systems arises from two different sources: inelasticity in particle collisions and viscous friction dissipation due to the influence of the gas phase on the solid particles. The starting point is a suspension model based on the (inelastic) Enskog kinetic equation. The effect of the interstitial gas phase on the dynamics of grains is modeled though a viscous drag force. The study is carried out in two different steps. First, the transport coefficients of the system are obtained by solving the Enskog equation by means of the Chapman–Enskog method up to first order in spatial gradients. Explicit expressions for the Navier–Stokes transport coefficients are obtained in terms of the volume fraction, the coefficient of restitution and the friction coefficient characterizing the amplitude of the external force. Once the transport properties are known, then the corresponding linearized hydrodynamic equations are solved to get the dispersion relations. In contrast to previous studies (Garzó et al 2016 Phys. Rev. E 93 012905), the hydrodynamic modes are analytically obtained as functions of the parameter space of the system. For a d-dimensional system, as expected linear stability shows d  ‑  1 transversal (shear) modes and a longitudinal ‘heat’ mode to be unstable with respect to long enough wavelength excitations. The results also show that the main effect of the gas phase is to decrease the value of the critical length L c (beyond which the system becomes unstable) with respect to its value for a dry granular fluid. Comparison with direct numerical simulations for L c shows a qualitative good agreement for conditions of practical interest.

  3. Experimental study of collisional granular flows down an inclined plane

    Science.gov (United States)

    Azanza, Emmanuel; Chevoir, François; Moucheront, Pascal

    1999-12-01

    The collisional flow of a slightly inelastic granular material down a rough inclined plane is usually described by kinetic theories. We present an experimental study aimed at analysing the assumptions and the quantitative predictions of such theories. A two-dimensional channel coupled to a model granular material and image analysis allow detailed and complete measurement of the kinematics and structure of the flows. We determine the range of inclination and particle flux for which the flow is stationary and uniform. The characteristic profiles of solid fraction, mean velocity and granular temperature are systematically measured. Both the true collisional and the dilute kinetic regimes are examined. We show that a quasi-hydrodynamic description of these regimes seems relevant, and that the pressure and the viscosity terms are in good qualitative agreement with the prediction of the kinetic theory. The profiles are well described by the kinetic theory near the top of the flow, at low solid fraction. Conversely there are large discrepancies near the rough plane, where the material is structured in layers.

  4. Streamwise transport in multi-component granular flows

    Science.gov (United States)

    Johnson, Chris; Hogg, Andrew; Phillips, Jeremy

    2016-11-01

    Thin free-surface avalanches of granular material occur widely in nature and industry. In these contexts the flows often contain particles of a wide range of sizes, which separate from one another due to particle size segregation. This segregation is troublesome in industry (where a well-mixed state is usually desired) and is an important mechanism for determining the runout and morphology of natural avalanches and debris flows. In this talk we develop a model for the spatial and temporal evolution of the particle size distribution in a granular flow, due to particle segregation, diffusion and advection processes. We use asymptotic solutions of this model to formulate equations governing the depth-integrated particle size distribution. These equations naturally extend the shallow-water models often used to predict the dynamics of monodisperse avalanches. Our modelling shows that particles in granular avalanches may strongly segregate in the direction of flow, even when the segregation is relatively weak compared to diffusive mixing and the avalanche is nearly homogeneous throughout its depth. We demonstrate this surprising phenomenon through comparison with discrete particle simulations.

  5. Phase transition and bistable phenomenon of granular flows down a chute with successive turnings

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Guo-Cheng; Liu, Qi-Yi [School of Engineering Science, University of Science and Technology of China, Hefei 230026 (China); Hu, Mao-Bin, E-mail: humaobin@ustc.edu.cn [School of Engineering Science, University of Science and Technology of China, Hefei 230026 (China); Kavli Institute for Theoretical Physics China at the Chinese Academy of Sciences, Beijing 100190 (China); Jiang, Rui; Wu, Qing-Song [School of Engineering Science, University of Science and Technology of China, Hefei 230026 (China)

    2014-03-01

    This paper studies the granular flow down a chute with two successive turnings, which play the role of bottlenecks for the granular flow system and determine the granular flow state in main section between them. With the increase of main section width D, phase transition from dilute to dense granular flow is observed: When the main section width D is small (large), the granular flow at upper (lower) bottleneck is dense and the granular flow is dilute (dense) in the main section. More interestingly, a bistable region is exhibited, in which either dilute flow or dense flow may occur and continue for the entire run. In this region, the packing in the reservoir will affect initial flow rate and then affect the flow pattern. This study can be viewed as a paradigm for the jamming and unjamming transitions under shear due to gravity.

  6. Extension of dynamics of granular flow methodology to cell biology

    Science.gov (United States)

    Kummer, A.; Ocone, R.

    2003-04-01

    In a previous paper (J. Non-Newtonian Fluid Mech. 76 (1998) 5), the analogy between the methodology typical of the dynamics of polymeric liquids and those used in granular flow theory was investigated. It was shown that such a methodology could be successfully extended to granular flow, and then it was speculated on the possibility of extending it to diverse areas. In this paper two important conclusions are reached. Firstly we show that the methodology behind the statistical theories (which starting from the microstructural element eventually leads to the formulation of constitutive equations (AICHE Symposium Series, Vol. 93, 1997, p. 103)) can be extended to an apparently completely different field, namely cell biology. We then show that classical thermodynamics, as applied to epigenetic systems, presents limitations which can be overcome following an axiomatic thermodynamic route (J. Rheol. 37 (1993) 727).

  7. Applications and limitations of a rheology for granular flows

    Science.gov (United States)

    Cawthorn, Chris; Hinch, John; Huppert, Herbert

    2007-11-01

    In order to assess the validity of the rheological law for granular flows proposed by Jop, Pouliquen and Forterre [Nature, vol. 441, pp.727-730], we present its application to a number of different problems. Whilst it works well for steady flow on a confined sandpile, or in an inclined channel, we will show that the law fails to qualitatively predict flow some simple geometries, such as annular Couette flow and vertical chute flow. In addition, we consider perturbations to 2D flow on an inclined plane and 3D flow in an inclined channel, where the effect of the confining vertical walls becomes important. Implications for the use of Jop's rheology for more complicated problems, particularly those involving dam-break or column collapse will also be addressed.

  8. Density Waves in the Flows of Granular Media

    OpenAIRE

    1993-01-01

    We study density waves in the flows of granular particles through vertical tubes and hoppers using both analytic methods and molecular dynamics (MD) simulations. We construct equations of motion for quasi one-dimensional systems. The equations, combined with the Bagnold's law for friction, are used to describe the time evolutions of the density and the velocity fields for narrow tubes and hoppers. The solutions of the equations can have two types of density waves, kinetic and dynamic. For tub...

  9. Erosion and basal forces in granular flow experiments

    Science.gov (United States)

    Sanvitale, Nicoletta; Bowman, Elisabeth

    2016-04-01

    Extreme mass wasting avalanche events such as rock, snow and ice avalanches, debris flows, and pyroclastic flows are among the most hazardous geological phenomena. These events driven by gravity, can travel for long distance and high speed, increasing their volumes as they can entertain material along their path. The erosion of material and its entrainment can greatly affect the overall dynamics of transportation, either enhancing or impeding the avalanche mobility depending on flow dynamics and characteristics of the substrate. However, the mechanisms and processes acting at the base as they travel over deformable or erodible substrates are still poor understood. Experiments, simulations and field measurements indicate that large fluctuations can occur in basal forces and stresses, which may be the result of non-uniform load transfer within the mass, and rolling, bouncing and sliding of the particles along the bed. In dense granular materials, force distributions can propagate through filamentary chain structures that carry a large fraction of the forces within the system. Photoelastic experiments on two-dimensional, monodisperse, gravity-driven flows have shown that force chains can transmit high localized forces to the boundary of dense granular flows. Here we describe the preliminary setup and results of 2D experiments on polydisperse granular flows of photoelastic disks down a small flume designed to acquire the forces exerted at the boundaries of the flow and to analyze their effects on an erodible bed. The intended outcome of this research is to provide better information on the complex mechanism of erosion and its effects on avalanche behaviour.

  10. Controlling mixing and segregation in time periodic granular flows

    Science.gov (United States)

    Bhattacharya, Tathagata

    Segregation is a major problem for many solids processing industries. Differences in particle size or density can lead to flow-induced segregation. In the present work, we employ the discrete element method (DEM)---one type of particle dynamics (PD) technique---to investigate the mixing and segregation of granular material in some prototypical solid handling devices, such as a rotating drum and chute. In DEM, one calculates the trajectories of individual particles based on Newton's laws of motion by employing suitable contact force models and a collision detection algorithm. Recently, it has been suggested that segregation in particle mixers can be thwarted if the particle flow is inverted at a rate above a critical forcing frequency. Further, it has been hypothesized that, for a rotating drum, the effectiveness of this technique can be linked to the probability distribution of the number of times a particle passes through the flowing layer per rotation of the drum. In the first portion of this work, various configurations of solid mixers are numerically and experimentally studied to investigate the conditions for improved mixing in light of these hypotheses. Besides rotating drums, many studies of granular flow have focused on gravity driven chute flows owing to its practical importance in granular transportation and to the fact that the relative simplicity of this type of flow allows for development and testing of new theories. In this part of the work, we observe the deposition behavior of both mono-sized and polydisperse dry granular materials in an inclined chute flow. The effects of different parameters such as chute angle, particle size, falling height and charge amount on the mass fraction distribution of granular materials after deposition are investigated. The simulation results obtained using DEM are compared with the experimental findings and a high degree of agreement is observed. Tuning of the underlying contact force parameters allows the achievement

  11. Particles size segregation and roll waves in dense granular flows

    Science.gov (United States)

    Viroulet, Sylvain; Baker, James; Kokelaar, Peter; Gray, Nico

    2015-11-01

    Geophysical granular flows, such as landslides, snow avalanches and pyroclastic flows commonly involve particles with different sizes which are prone to segregate during the flow. This particle-size segregation may lead to the formation of regions with different frictional properties which can have a feedback on the flow. This study aims to understand this effect in the context of bi-disperse roll waves in shallow granular free-surface flows. Experiments have been performed in a 3 meter long chute using several mixtures of spherical glass beads of diameter 75-150 and 400-600 microns flowing on a rough bed. These show that the waves propagate at constant speed that depends on the initial mixture composition. In addition, during their propagation, a higher concentration of large particles is localized at the front of the waves. A theoretical and numerical approach is presented using depth-averaged equations for the conservation of mass, momentum and depth-averaged small particle concentration. Results without frictional feedback are investigated and compared to those that include the enhanced frictional resistance to motion of the large grains.

  12. Gas flow within Martian soil: experiments on granular Knudsen compressors

    Science.gov (United States)

    Koester, Marc; Kelling, Thorben; Teiser, Jens; Wurm, Gerhard

    2017-09-01

    Thermal creep efficiently transports gas through Martian soil. To quantify the Martian soil pump we carried out laboratory analog experiments with illuminated granular media at low ambient pressure. We used samples of 1 μm to 5 μm SiO2 (quartz), basalt with a broad size distribution between 63 μm and 125 μm, and JSC-Mars 1A with a size fraction from 125 μm to 250 μm. The mean ambient pressure was varied between 50 Pa and 9000 Pa. Illumination was varied between 100 W/m2 and 6700 W/m2. The experiments confirm strong directed gas flows within granular and dusty soil and local sub-soil pressure variations. We find that Martian soil pumps can be described with existing models of thermal creep for capillaries, using the average grain size and light flux related temperatures.

  13. Revisiting Johnson and Jackson boundary conditions for granular flows

    Energy Technology Data Exchange (ETDEWEB)

    Li, Tingwen; Benyahia, Sofiane

    2012-07-01

    In this article, we revisit Johnson and Jackson boundary conditions for granular flows. The oblique collision between a particle and a flat wall is analyzed by adopting the classic rigid-body theory and a more realistic semianalytical model. Based on the kinetic granular theory, the input parameter for the partial-slip boundary conditions, specularity coefficient, which is not measurable in experiments, is then interpreted as a function of the particle-wall restitution coefficient, the frictional coefficient, and the normalized slip velocity at the wall. An analytical expression for the specularity coefficient is suggested for a flat, frictional surface with a low frictional coefficient. The procedure for determining the specularity coefficient for a more general problem is outlined, and a working approximation is provided.

  14. Modelling density segregation in flowing bidisperse granular materials

    Science.gov (United States)

    Xiao, Hongyi; Umbanhowar, Paul B.; Ottino, Julio M.; Lueptow, Richard M.

    2016-07-01

    Preventing segregation in flowing granular mixtures is an ongoing challenge for industrial processes that involve the handling of bulk solids. A recent continuum-based modelling approach accurately predicts spatial concentration fields in a variety of flow geometries for mixtures varying in particle size. This approach captures the interplay between advection, diffusion and segregation using kinematic information obtained from experiments and/or discrete element method (DEM) simulations combined with an empirically determined relation for the segregation velocity. Here, we extend the model to include density-driven segregation, thereby validating the approach for the two important cases of practical interest. DEM simulations of density bidisperse flows of mono-sized particles in a quasi-two-dimensional-bounded heap were performed to determine the dependence of the density-driven segregation velocity on local shear rate and particle concentration. The model yields theoretical predictions of segregation patterns that quantitatively match the DEM simulations over a range of density ratios and flow rates. Matching experiments reproduce the segregation patterns and quantitative segregation profiles obtained in both the simulations and the model, thereby demonstrating that the modelling approach captures the essential physics of density-driven segregation in granular heap flow.

  15. On the similarity in shape between debris-flow channels and high-gradient flood channels: Initial insight from continuum models for granular and water flow

    Science.gov (United States)

    Kean, J. W.; McCoy, S. W.; Tucker, G. E.

    2011-12-01

    cases, with the granular-flow field exhibiting more uniformity across the cross section than the water-velocity field, which decreases rapidly near the banks. Thus, while the internal dynamics of granular flow and water flow differ, the theoretical distribution of forces transmitted to the bed by granular flow and turbulent water flow are similar enough to form channels having comparable morphology. These initial results highlight that cross-sectional channel geometry alone does not encode flow dynamics to such a degree that the two end-member processes can be distinguished. If a distinction between dry and wet erosive processes is to be made from remotely sensed topographic data, then additional morphologic signatures must be investigated.

  16. The Flow Of Granular Matter Under Reduced-Gravity Conditions

    CERN Document Server

    Hofmeister, Paul Gerke; Heißelmann, Daniel

    2009-01-01

    To gain a better understanding of the surfaces of planets and small bodies in the solar system, the flow behavior of granular material for various gravity levels is of utmost interest. We performed a set of reduced-gravity measurements to analyze the flow behavior of granular matter with a quasi-2D hourglass under coarse-vacuum conditions and with a tilting avalanche box. We used the Bremen drop tower and a small centrifuge to achieve residual-gravity levels between 0.01 g and 0.3 g. Both experiments were carried out with basalt and glass grains as well as with two kinds of ordinary sand. For the hourglass experiments, the volume flow through the orifice, the repose and friction angles, and the flow behavior of the particles close to the surface were determined. In the avalanche-box experiment, we measured the duration of the avalanche, the maximum slope angle as well as the width of the avalanche as a function of the gravity level.

  17. Hard-sphere limit of soft-sphere model for granular materials: Stiffness dependence of steady granular flow

    OpenAIRE

    Mitarai, Namiko; Nakanishi, Hiizu

    2002-01-01

    Dynamical behavior of steady granular flow is investigated numerically in the inelastic hard sphere limit of the soft sphere model. We find distinctively different limiting behaviors for the two flow regimes, i.e., the collisional flow and the frictional flow. In the collisional flow, the hard sphere limit is straightforward; the number of collisions per particle per unit time converges to a finite value and the total contact time fraction with other particles goes to zero. For the frictional...

  18. Flow and fracture in water-saturated, unconstrained granular beds

    Directory of Open Access Journals (Sweden)

    Germán eVaras

    2015-06-01

    Full Text Available The injection of gas in a liquid-saturated granular bed gives rise to a wide variety of invasion patterns. Many studies have focused on constrained porous media, in which the grains are fixed in the bed and only the interstitial fluid flows when the gas invades the system. With a free upper boundary, however, the grains can be entrained by the ascending gas or fluid motion, and the competition between the upward motion of grains and sedimentation leads to new patterns. We propose a brief review of the experimental investigation of the dynamics of air rising through a water-saturated, unconstrained granular bed, in both two and three dimensions. After describing the invasion pattern at short and long time, a tentative regime-diagram is proposed. We report original results showing a dependence of the fluidized zone shape, at long times, on the injection flow rate and grain size. A method based on image analysis makes it possible to detect not only the fluidized zone profile in the stationary regime, but also to follow the transient dynamics of its formation. Finally, we describe the degassing dynamics inside the fluidized zone, in the stationary regime. Depending on the experimental conditions, regular bubbling, continuous degassing, intermittent regime or even spontaneous flow-to-fracture transition are observed.

  19. Segregating photoelastic particles in free-surface granular flows

    Science.gov (United States)

    Thomas, Amalia L.; Vriend, Nathalie M.

    2016-11-01

    We experimentally investigate bimodal avalanches of photoelastic discs between two narrow side-walls. We visualize the physical phenomena that occur during segregation and quantify the dynamic appearance of force chains within the bulk of the flow from fringe patterns using photoelastic theory. The photoelastic technique has been used in granular research for almost half a century and has been applied in a variety of quasi-steady systems. We have now adapted the technique to perform well within dynamic granular flows where collisions are short-lived and force chains are formed and broken continuously. Our photoelastic urethane discs are cast in-house to provide high-resolution fringe patterns and a high stress-optic coefficient. In addition we carried out stress relaxation tests to study the viscoelastic properties of the photoelastic material, and measured the speed of force transmission and dampening from a moving particle onto a static chain of particles. In our avalanche experiments, we also employ particle tracking and particle velocimetry techniques to measure the general flow field within the avalanche. The overall goal of our work is to investigate and quantify the influence of the distribution of forces on the fundamental processes that drive segregation.

  20. Characterization of base roughness for granular chute flows

    CERN Document Server

    Jing, Lu; Leung, Y F; Sobral, Y D

    2016-01-01

    Base roughness plays an important role to the dynamics of granular flows but is yet poorly understood due to the difficulty of its quantification. For a bumpy base made by spheres, at least two factors should be considered to characterize its geometric roughness, namely the size ratio of base- to flow-particles and the packing of base particles. In this paper, we propose a definition of base roughness, Ra, which is a function of both the size ratio and the packing arrangement of base particles. The function is generalized for random and regular packing of multi-layered spheres, where the range of possible values of Ra is studied, along with the optimal values to create maximum base roughness. The new definition is applied to granular flows down chute in both two- and three-dimensional configurations. It is proven to be a good indicator of slip condi- tion, and a transition occurs from slip to non-slip condition as Ra increases. Critical values of Ra are identified for the construction of a non-slip base. The ...

  1. Discrete Element Method Simulations for Complex Granular Flows

    Science.gov (United States)

    Guo, Yu; Curtis, Jennifer Sinclair

    2015-01-01

    This review article focuses on the modeling of complex granular flows employing the discrete element method (DEM) approach. The specific topic discussed is the application of DEM models for the study of the flow behavior of nonspherical, flexible, or cohesive particles, including particle breakage. The major sources of particle cohesion—liquid induced, electrostatics, van der Waals forces—and their implementation into DEM simulations are covered. These aspects of particle flow are of great importance in practical applications and hence are the significant foci of research at the forefront of current DEM modeling efforts. For example, DEM simulations of nonspherical grains can provide particle stress information needed to develop constitutive models for continuum-based simulations of large-scale industrial processes.

  2. UNDERSTANDING URBAN TRAFFIC FLOW CHARACTERISTICS FROM THE NETWORK CENTRALITY PERSPECTIVE AT DIFFERENT GRANULARITIES

    Directory of Open Access Journals (Sweden)

    P. X. Zhao

    2016-06-01

    Full Text Available In this study, we analyze urban traffic flow using taxi trajectory data to understand the characteristics of traffic flow from the network centrality perspective at point (intersection, line (road, and area (community granularities. The entire analysis process comprises three steps. The first step utilizes the taxi trajectory data to evaluate traffic flow at different granularities. Second, the centrality indices are calculated based on research units at different granularities. Third, correlation analysis between the centrality indices and corresponding urban traffic flow is performed. Experimental results indicate that urbaxperimental results indicate that urbaxperimental results indicate that urban traffic flow is relatively influenced by the road network structure. However, urban traffic flow also depends on the research unit size. Traditional centralities and traffic flow exhibit a low correlation at point granularity but exhibit a high correlation at line and area granularities. Furthermore, the conclusions of this study reflect the universality of the modifiable areal unit problem.

  3. Rheology of binary granular mixtures in the dense flow regime

    Science.gov (United States)

    Tripathi, Anurag; Khakhar, D. V.

    2011-11-01

    We study the rheology of granular mixtures in a steady, fully developed, gravity-driven flow on an inclined plane, by means of discrete element method (DEM) simulations. Results are presented for a single component system and binary mixtures with particles of different size and density. Inclination angles, composition, size ratios and density ratios are varied to obtain different segregated configurations at equilibrium. Steady state profiles of the mean velocity, volume fractions, shear stress, shear rate, inertial number and apparent viscosity across the depth of the flowing layer are reported for the different cases. The viscosity varies with height and is found to depend on the local bulk density and composition, which, in turn, depend on the size ratio, the mass ratio and the degree of segregation. For a single component system, a viscoplastic rheological model [P. Jop et al., Nature 441, 727 (2006)] describes the data quite well. We propose a modification of the model for the case of mixtures. The mixture model predicts the viscosity for both well-mixed and segregated granular mixtures differing in size, density or both, using the same model parameters as obtained for the single component system. The predictions of a model for the volume fraction of the mixtures also agree well with simulation results.

  4. Flow of granular materials-I. Discharge rates from hoppers

    Energy Technology Data Exchange (ETDEWEB)

    Nedderman, R.M. (Univ. of Cambridge, England); Tuezuen, U.; Savage, S.B.; Houlsby, G.T.

    1982-01-01

    This was the first of a set of three review papers on the flow of granular materials. The objective of the papers was to review the published literature in these fields. Much information was drawn from a body of unpulished work represented by internal reports of the Chemical Engineering Department at Cambridge. This paper discussed the experimental results for hopper discharge rates and the correlations of these results. Then theoretical analyses that have been advanced to explain the observations were presented. Also the effects of interstitial pressure gradients were discussed, both those that arise due to deliberate pressurization of the hopper and those caused by the dilation of the flowing material. The flow of coarse, free-flowing materials through orifices seemed to have been adequately investigated experimentally and the correlation of Beverloo or minor modifications of it appeared to predict the flow rates with acceptable precision. Some difficulties were however encountered with narrow angled conical hoppers or in cases where the orifice is close to a vertical wall. The effects of an imposed gas flow were also correlated to reasonable precision at least for modest gas flow rates. Though the correlations seemed satisfactory, there was no really adequate theoretical explanations of the observations. Several theories exist that give qualitative trends in accord with obsrvation but there is no theory that can be used without empirical adjustments of the coefficients. However, with fine particles many more difficulties are encountered. 6 figures. (DP)

  5. Assessment of the kinetic-frictional model for dense granular flow

    Institute of Scientific and Technical Information of China (English)

    Boon Ho Ng; Yulong Ding; Mojtaba Ghadiri

    2008-01-01

    This paper aims to quantitatively assess the application of kinetic-frictional model to simulate the motion of dry granular materials in dense condition, in particular, the annular shearing in Couette configuration. The weight of frictional stress was varied to study the contribution of the frictional stress in dense granular flows. The results show that the pure kinetic-theory-based computational fluid dynamics (CFD) model (without frictional stress) over-predicts the dominant solids motion of dense granular flow while adding frictional stress [Schaeffer, D. G. (1987). Instability in the evolution equations describing incompressible granular flow. Journal of Differential Equations, 66(1), 19-50] with the solids pressure of [Lun, C. KTK., Savage, S. B., Jeffrey, D. J., & Chepurniy, N. (1984). Kinetic theories for granular flow: Inelastic particles in Couette flow and slightly inelastic particles in a general flow field. Journal of Fluid Mechanics, 140, 223-256] in the CFD model improves the simulation to better conform available experimental results. The results also suggest that frictional stress transmission plays an important role in dense granular flow and should not be neglected in granular flow simulations. Compatible simulation results to the experimental data are seen by increasing the weight of frictional stress to a factor of 1.25-1.5. These improved simulation results suggest the current constitutive relations (kinetic-frictional model) need to be improved in order to better reflect the real dense granular flow.

  6. Confined granular flow in silos experimental and numerical investigations

    CERN Document Server

    Tejchman, Jacek

    2013-01-01

      During confined flow of bulk solids in silos some characteristic phenomena can be created, such as: —         sudden and significant increase of wall stresses, —         different flow patterns, —         formation and propagation of wall and interior shear zones, —         fluctuation of pressures and, —         strong autogenous dynamic effects. These phenomena have not been described or explained in detail yet. The main intention of the experimental and theoretical research presented in this book is to explain the above mentioned phenomena in granular bulk solids and to describe them with numerical FE models verified by experimental results.

  7. Minor Losses During Air Flow into Granular Porous Media

    DEFF Research Database (Denmark)

    Poulsen, Tjalfe Gorm; Minelgaite, Greta; Bentzen, Thomas Ruby

    2013-01-01

    Pressure gradients during uniform fluid flow in porous media are traditionally assumed to be linear. Thus, pressure loss across a sample of porous medium is assumed directly proportional to the thickness of the sample. In this study, measurements of pressure gradients inside coarse granular (2...... that the pressure loss in porous media consists of two components: (1) a linear pressure gradient and (2) an initial pressure loss near the inlet. This initial pressure loss is also known from hydraulics in tubes as a minor loss and is associated with abrupt changes in the flow field such as narrowings and bends....... The results further indicated that the minor loss depends on the particle size and particle size distribution in a manner similar to that of the linear pressure gradient. There is, thus, a close relation between these two components. In porous media, the minor loss is not instantaneous at the inlet point...

  8. Numerical modelling of granular flows: a reality check

    Science.gov (United States)

    Windows-Yule, C. R. K.; Tunuguntla, D. R.; Parker, D. J.

    2016-07-01

    Discrete particle simulations provide a powerful tool for the advancement of our understanding of granular media, and the development and refinement of the multitudinous techniques used to handle and process these ubiquitous materials. However, in order to ensure that this tool can be successfully utilised in a meaningful and reliable manner, it is of paramount importance that we fully understand the degree to which numerical models can be trusted to accurately and quantitatively recreate and predict the behaviours of the real-world systems they are designed to emulate. Due to the complexity and diverse variety of physical states and dynamical behaviours exhibited by granular media, a simulation algorithm capable of closely reproducing the behaviours of a given system may be entirely unsuitable for other systems with different physical properties, or even similar systems exposed to differing control parameters. In this paper, we focus on two widely used forms of granular flow, for which discrete particle simulations are shown to provide a full, quantitative replication of the behaviours of real industrial and experimental systems. We identify also situations for which quantitative agreement may fail are identified, but important general, qualitative trends are still recreated, as well as cases for which computational models are entirely unsuitable. By assembling this information into a single document, we hope not only to provide researchers with a useful point of reference when designing and executing future studies, but also to equip those involved in the design of simulation algorithms with a clear picture of the current strengths and shortcomings of contemporary models, and hence an improved knowledge of the most valuable areas on which to focus their work.

  9. The Thermal Conductivity Theory of Non-uniform Granular Flow and the Mechanism Analysis

    Institute of Scientific and Technical Information of China (English)

    ZHANGDuan-Ming; LEIYa-Jie; YUBo-Ming; PANGui-Jun

    2003-01-01

    According to the fractal characteristics appearing in non-uniform granular system, we found the fractal model to study the effective thermal conductivity in the mixed system. Considering the quasi-equilibrium, we bring forward the fractal velocity probability distribution function. The equipartition of energy is employed to the non-uniform granular system, and the granular temperature is derived. We investigate the thermal conductivity in granular flow due to the movement of the particles, namely the heat transfer induced by the streaming mode only. The thermal conductivity in the mixed system changes with the fractal parameters such as the solid fraction v, structural character parameter η, and fractal dimension D of size distribution. These parameters depict the characteristics of the thermal conductivity in the actual complex granular system. Comparing our conclusion with the correlative experimental data and the theoretical conclusion of binary mixture of granular materials, the results can qualitatively confirm the generality of our prediction on the granular system.

  10. Nonhydrostatic granular flow over 3-D terrain: New Boussinesq-type gravity waves?

    Science.gov (United States)

    Castro-Orgaz, Oscar; Hutter, Kolumban; Giraldez, Juan V.; Hager, Willi H.

    2015-01-01

    granular mass flow is a basic step in the prediction and control of natural or man-made disasters related to avalanches on the Earth. Savage and Hutter (1989) pioneered the mathematical modeling of these geophysical flows introducing Saint-Venant-type mass and momentum depth-averaged hydrostatic equations using the continuum mechanics approach. However, Denlinger and Iverson (2004) found that vertical accelerations in granular mass flows are of the same order as the gravity acceleration, requiring the consideration of nonhydrostatic modeling of granular mass flows. Although free surface water flow simulations based on nonhydrostatic depth-averaged models are commonly used since the works of Boussinesq (1872, 1877), they have not yet been applied to the modeling of debris flow. Can granular mass flow be described by Boussinesq-type gravity waves? This is a fundamental question to which an answer is required, given the potential to expand the successful Boussinesq-type water theory to granular flow over 3-D terrain. This issue is explored in this work by generalizing the basic Boussinesq-type theory used in civil and coastal engineering for more than a century to an arbitrary granular mass flow using the continuum mechanics approach. Using simple test cases, it is demonstrated that the above question can be answered in the affirmative way, thereby opening a new framework for the physical and mathematical modeling of granular mass flow in geophysics, whereby the effect of vertical motion is mathematically included without the need of ad hoc assumptions.

  11. Intermittent Flow of Granular Matter in an Annular Geometry

    Science.gov (United States)

    Brzinski, Ted; Daniels, Karen E.

    Granular solids can be subjected to a finite stress below which the response is elastic. Above this yield stress, however, the material fails catastrophically, undergoing a rapid plastic deformation. In the case of a monotonically increasing stress the material exhibits a characteristic stick-slip response. We investigate the statistics of this intermittent failure in an annular shear geometry, driven with a linear-ramp torque in order to generate the stick-slip behavior. The apparatus is designed to allow visual access to particle trajectories and inter-particle forces (through the use of photoelastic materials). Additionally, twelve piezoelectric sensors at the outer wall measure acoustic emissions due to the plastic deformation of the material. We vary volume fraction, and use both fixed and deformable boundaries. We measure how the distribution of slip size and duration are related to the bulk properties of the packing, and compare to systems with similar governing statistics.

  12. Blast shocks in quasi-two-dimensional supersonic granular flows.

    Science.gov (United States)

    Boudet, J F; Cassagne, J; Kellay, H

    2009-11-27

    In a thin, dilute, and fast flowing granular layer, the impact of a small sphere generates a fast growing hole devoid of matter. The growth of this hole is studied in detail, and its dynamics is found to mimic that of blast shocks in gases. This dynamics can be decomposed into two stages: a fast initial stage (the blast) and a slower growth regime whose growth velocity is given by the speed of sound in the medium used. A simple model using ingredients already invoked for the case of blast shocks in gases but including the inelastic nature of collisions between grains accounts accurately for our results. The system studied here allows for a detailed study of the full dynamics of a blast as it relaxes from a strong to a weak shock and later to an acoustic disturbance.

  13. Averaging processes in granular flows driven by gravity

    Science.gov (United States)

    Rossi, Giulia; Armanini, Aronne

    2016-04-01

    One of the more promising theoretical frames to analyse the two-phase granular flows is offered by the similarity of their rheology with the kinetic theory of gases [1]. Granular flows can be considered a macroscopic equivalent of the molecular case: the collisions among molecules are compared to the collisions among grains at a macroscopic scale [2,3]. However there are important statistical differences in dealing with the two applications. In the two-phase fluid mechanics, there are two main types of average: the phasic average and the mass weighed average [4]. The kinetic theories assume that the size of atoms is so small, that the number of molecules in a control volume is infinite. With this assumption, the concentration (number of particles n) doesn't change during the averaging process and the two definitions of average coincide. This hypothesis is no more true in granular flows: contrary to gases, the dimension of a single particle becomes comparable to that of the control volume. For this reason, in a single realization the number of grain is constant and the two averages coincide; on the contrary, for more than one realization, n is no more constant and the two types of average lead to different results. Therefore, the ensamble average used in the standard kinetic theory (which usually is the phasic average) is suitable for the single realization, but not for several realization, as already pointed out in [5,6]. In the literature, three main length scales have been identified [7]: the smallest is the particles size, the intermediate consists in the local averaging (in order to describe some instability phenomena or secondary circulation) and the largest arises from phenomena such as large eddies in turbulence. Our aim is to solve the intermediate scale, by applying the mass weighted average, when dealing with more than one realizations. This statistical approach leads to additional diffusive terms in the continuity equation: starting from experimental

  14. Relating water and air flow characteristics in coarse granular materials

    DEFF Research Database (Denmark)

    Andreasen, Rune Røjgaard; Canga, Eriona; Poulsen, Tjalfe Gorm

    2013-01-01

    Water pressure drop as a function of velocity controls w 1 ater cleaning biofilter operation 2 cost. At present this relationship in biofilter materials must be determined experimentally as no 3 universal link between pressure drop, velocity and filter material properties have been established. 4...... Pressure drop - velocity in porous media is much simpler and faster to measure for air than for water. 5 For soils and similar materials, observations show a strong connection between pressure drop – 6 velocity relations for air and water, indicating that water pressure drop – velocity may be estimated 7...... from air flow data. The objective of this study was, therefore, to investigate if this approach is valid 8 also for coarse granular biofilter media which usually consists of much larger particles than soils. In 9 this paper the connection between the pressure drop – velocity relationships for air...

  15. Shear Profiles and Velocity Distribution in Dense Shear Granular Flow

    Institute of Scientific and Technical Information of China (English)

    WANG Deng-Ming; ZHOU You-He

    2009-01-01

    We perform DEM simulations to investigate the influence of the packing fraction γ on the,shape of mean tan-gential velocity profile in a 2D annular dense shear granular flow. There is a critical packing fraction γc. For γ < γc, the mean tangential velocity profile shows a roughly exponential decay from the shearing boundary and is almost invariant to the imposed shear rate. However, for γ γc, the tangential velocity profile exhibits a rate-dependence feature and changes from linear to nonlinear gradually with the increasing shear rate. Fhrther-more, the distributions of normalized tangential velocities at different positions along radial direction exhibit the Gaussian or the composite Gaussian distributing features.

  16. A Stochastic Description of Transition Between Granular Flow States

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Two-dimensional granular flow in a channel with small exit is studied by molecular dynamics simulations. We Erstly define a key area near the exit, which is considered to be the choke area of the system. Then we observe the time variation of the local packing fraction and flow rate in this area for several fixed inflow rate, and find that these quantities change abruptly when the transition from dilute How state to dense Bow state happens. A relationship between the local flow rate and the local packing fraction in the key area is also given. The relationship is a continuous function under the fixed particle number condition, and has the characteristic that the flow rate has a maximum at a moderate packing fraction and the packing fraction is terminated at a high value with negative slope. By use of the relationship, the properties of the How states under the fixed inflow rate condition are discussed in detail, and the discontinuities and the complex time variation behavior observed in the preexisting works are naturally explained by a stochastic process.

  17. Effect of cohesion on granular-fluid flows in spouted beds: PIV measurement and DEM simulations

    Science.gov (United States)

    Zhu, Runru; LI, Shuiqing; Yao, Qiang

    2013-06-01

    In contrast to wet granular flows, the effect of cohesion on complex granular-fluid flows is intriguing but much challenging. The liquid bridges, forming between binary particles with the addition of a small amount of liquids, might significantly change the granular-fluid system due to both cohesion and lubrication effects. In this paper, a spouted bed, among various fluidization technologies, is particularly selected as a prototypical system for studying granular-fluid flows, since it can provide a quasi-steady flow pattern of granular particles, i.e., a core of upward granular-fluid flow called the "spout" and a surrounding region of downward quasi-static granular flow called the "annulus". Firstly, using self-developed particle image velocimetery (PIV) technique, the effects of cohesion on the spout-annulus interface (namely the spout width) and on the particle velocity profiles in distinct zones are examined. Further, the discrete element method (DEM), by incorporating liquid bridge adhesion into soft-sphere model, is established and used to predict the microdynamic behavior of particles in spouted beds. Finally, based on both experiments and DEM validation, the effects on the granular patterns in these two zones are comparatively discussed.

  18. Euler-like modelling of dense granular flows: application to a rotating drum

    Science.gov (United States)

    Bonamy, D.; Chavanis, P.-H.; Cortet, P.-P.; Daviaud, F.; Dubrulle, B.; Renouf, M.

    2009-04-01

    General conservation equations are derived for 2D dense granular flows from the Euler equation within the Boussinesq approximation. In steady flows, the 2D fields of granular temperature, vorticity and stream function are shown to be encoded in two scalar functions only. We checked such prediction on steady surface flows in a rotating drum simulated through the Non-Smooth Contact Dynamics method even though granular flows are dissipative and therefore not necessarily compatible with Euler equation. Finally, we briefly discuss some possible ways to predict theoretically these two functions using statistical mechanics.

  19. Rheology of dense granular chute flow: simulations to experiments

    Directory of Open Access Journals (Sweden)

    Bharathraj S

    2017-01-01

    Full Text Available Granular chute flow simulations reveal an interesting transition from a random disordered structure to an ordered one with hexagonally ordered sheets of spherical particles, when the base roughness is modulated. Two types of base roughness are considered. The first is a fixed base, where glued spherical particles form the base, and the base roughness is varied by changing the ratio of diameters of the base and flowing particles. In the second sinusoidal base, a smooth wall with sinusoidal height variation is used; the amplitude and wavelength of the base modulation determine the base roughness. The transition is studied as a function of these roughness parameters. For the fixed base, there is a critical base particle diameter below which ordered states are observed. For the sinusoidal base, the critical amplitude increases linearly with the wavelength at lower wavelengths, reaches a maximum depending on the height of the flowing layer, and then decreases as the wavelength is further increased. There is flow for angles of inclination from 15 ° ≤ θ ≤ 25 ° for the ordered state and 20 ° ≤ θ ≤ 25 ° for the disordered state. Flow confinement by sidewalls also influences the rheology of the system and we see that the ordering is induced by the sidewalls as well. Experiments on chute flow at low angles indicate the presence of two types of rheology depending on the system height. A transition is observed from an erodible base configuration, where a dead zone at the bottom supports a free surface reposing at the top, to a Bagnold rheology with considerable slip at the bottom.

  20. Meeting on flows of granular materials in complex geometries

    Energy Technology Data Exchange (ETDEWEB)

    Passman, S.L.; Fukushima, E.; Evans, R.E. [eds.

    1994-11-01

    The International Energy Agency Fossil Fuel Multiphase Flow Sciences Agreement has been in effect since 1986. The traditional mechanism for the effort has been information exchange, effected by the inclusion of scientists in annual Executive committee meetings, by exchange of reports and papers, and by visits of scientists to one another`s institutions. In a sequence of informal meetings and at the 1993 Executive committee meeting, held in Pittsburgh, US in March 1994, it was decided that more intensive interactions could be productive. A candidate for such interactions would be specific projects. Each of these would be initiated through a meeting of scientists in which feasibility of the particular project was decided, followed by relatively intense international co-operation in which the work would be done. This is a report of the first of these meetings. Official or unofficial representatives from Canada, italy, japan, mexico, the United Kingdom, and the US met in Albuquerque, New Mexico, US, to consider the subject Flows of Granular Materials in Complex Geometries. Representatives of several other countries expressed interest but were unable to attend this meeting. Sixteen lectures were given on aspects of this topic. It was decided that a co-operative effort was desirable and possible. The most likely candidate for the area of study would be flows in bins and hoppers. Each of the countries wishing to co-operate will pursue funding for its effort. This report contains extended abstracts of the sixteen presentations and a transcription of the final discussion.

  1. Incorporation of Interstitial Gas Effects on Granular Flows

    Science.gov (United States)

    Hrenya, Christine; Garzo, Vicente; Tenneti, Sudheer; Subramaniam, Shankar

    2013-11-01

    Numerous examples of granular flows exist in which the role of the interstitial gas cannot be ignored. A range of approaches have been taken to incorporate these effects into continuum descriptions. Early efforts simply added a mean drag law to the momentum balance. This ad hoc approach was followed by more rigorous treatments in which an instantaneous drag was incorporated directly into the kinetic equation. Analytical expressions for the resulting continuum description were obtained in the Stokes limit, but not possible higher Reynolds numbers. In the current effort, DNS-based simulations are used to develop a model for the instantaneous drag force that is applicable to a wide range of Reynolds number. This model, based on the Langevin equation, is incorporated into the Enskog equation in order to derive a continuum description for the gas-solid flow. In the limit of Stokes flow, the additional terms arising in the conservation equation are found to match those of previous analytical treatments. Furthermore, the impact of gas on the solid-phase constitutive relations, which was ignored in analytical treatments, is determined. The parameter space examined is consistent with that found in circulating fluidized beds. For such systems, the results indicate a non-negligible impact of the gas phase on the shear viscosity and the Dufour coefficient.

  2. Continuum modelling of the collapse of a granular mass and its subsequent flow

    Science.gov (United States)

    Lagrée, P.; Staron, L.; Popinet, S.

    2011-12-01

    The continuum modelling of transient granular flows is of primary importance in the context of prediction and risk mitigation in relation with rock avalanches and dry debris flows. In this perspective, the granular column collapse experiment provides an interesting benchmark, due to both its relevance to natural granular flows and its challenging complexity (Lube 2004 et al, Lajeunesse et al 2006). In this contribution, we present 2D continuum simulations of granular column collapse using the Navier-Stokes solver Gerris (Popinet 2003), solving the full Navier-Stokes equations. The rheology implemented to model the granular media is the so-called μ (I) rheology, relating the frictional properties and the viscosity of the material to the pressure and shear rate (Jop et al 2006). In addition, discrete simulations using the Contact Dynamics method are performed for systematic comparison between the granular flow dynamics and its continuum counterpart (Staron & Hinch 2005). We find a good agreement, recovering the shape of the flow in the course of time, the internal flow structure, as well as experimental scaling laws for the run-out. A systematic underestimation of the latter is nevertheless observed, and discussed in terms of physical and numerical modeling. This work opens important new prospect for the simulation of more complex situations relevant to geophysical granular flows.

  3. Geophysical granular and particle-laden flows: review of the field.

    Science.gov (United States)

    Hutter, Kolumban

    2005-07-15

    An introduction is given to the title theme, in general, and the specific topics treated in detail in the articles of this theme issue of the Philosophical Transactions. They fit into the following broader subjects: (i) dense, dry and wet granular flows as avalanche and debris flow events, (ii) air-borne particle-laden turbulent flows in air over a granular base as exemplified in gravity currents, aeolian transport of sand, dust and snow and (iii) transport of a granular mass on a two-dimensional surface in ripple formations of estuaries and rivers and the motion of sea ice.

  4. Granular flow behavior at sharp changes in slope

    Science.gov (United States)

    Crosta, Giovanni; De Blasio, Fabio; Locatelli, Michele

    2015-04-01

    This study extends some recent experiments and analyses performed by the authors to examine the behavior of granular flows along path characterised by sharp changes in slope. In particular, various series of experiments along a bi-linear broken slope (an inclined initial sector followed by a horizontal one) have been completed using a uniform (Hostun, 0.32 mm) sand and a uniform fine gravel (2 mm grains). 60 new have been performed by releasing different volumes (1.5, 2.1 and 5.1 L) on surfaces characterized by different slope angles (35-60°), type of materials (wood and plexiglass), with or without an erodible layer (sand), or in presence of a shallow water pond (0.5 cm). These geometrical features are typical of many large rock and snow avalanches, rock falls and of chalk flows. The latter are usually typical of coastal cliffs where a shallow water environment is typical. The evolution of the flow has been monitored through a laser profilometer at 120 Hz sampling frequency and high speed camera, and in this way it has been possible to follow the evolution of the flow and deposition, and to analyse the change in deposition mode at varying the slope angle, the material and the basal friction. This is an extremely interesting development in the study of the evolution of the deposition and of the final morphology typical of such phenomena, and can support the testing of numerical models. Propagation and deposition occur forward or backward accordingly to the slope angle and the basal friction. Forward movement and deposition occur at high slope angles and with low basal friction. The opposite is true for the backward deposition. The internal "layering" within the deposit is also strongly controlled by the combination of such parameters. The time evolution of the flow allowed to determine the velocity of flow and the mode of deposition through the analysis of the change in thickness, position of the front and of the flow tail. Presence of water reduces the runout of

  5. Active dry granular flows: Rheology and rigidity transitions

    Science.gov (United States)

    Peshkov, Anton; Claudin, Philippe; Clément, Eric; Andreotti, Bruno

    2016-10-01

    The constitutive relations of a dense granular flow composed of self-propelling frictional hard particles are investigated by means of DEM numerical simulations. We show that the rheology, which relates the dynamical friction μ and the volume fraction ϕ to the inertial number I, depends on a dimensionless number A , which compares the active force to the confining pressure. Two liquid/solid transitions —in the Maxwell rigidity sense— are observed. As soon as the activity is turned on, the packing becomes an “active solid” with a mean number of particle contacts larger than the isostatic value. The quasi-static values of μ and ϕ decrease with A . At a finite value of the activity At , corresponding to the isostatic condition, a second “active rigidity transition” is observed beyond which the quasi-static values of the friction vanishes and the rheology becomes Newtonian. For A>At , we provide evidence for a highly intermittent dynamics of this “active fluid”.

  6. Percolation velocity dependence on local concentration in bidisperse granular flows

    Science.gov (United States)

    Jones, Ryan P.; Xiao, Hongyi; Deng, Zhekai; Umbanhowar, Paul B.; Lueptow, Richard M.

    The percolation velocity, up, of granular material in size or density bidisperse mixtures depends on the local concentration, particle size ratio, particle density ratio, and shear rate, γ ˙. Discrete element method computational results were obtained for bounded heap flows with size ratios between 1 and 3 and for density ratios between 1 and 4. The results indicate that small particles percolate downward faster when surrounded by large particles than large particles percolate upward when surrounded by small particles, as was recently observed in shear-box experiments. Likewise, heavy particles percolate downward faster when surrounded by light particles than light particles percolate upward when surrounded by heavy particles. The dependence of up / γ ˙ on local concentration results in larger percolation flux magnitudes at high concentrations of large (or light) particles compared to high concentrations of small (or heavy) particles, while local volumetric flux is conserved. The dependence of up / γ ˙ on local concentration can be incorporated into a continuum model, but the impact on global segregation patterns is usually minimal. Partially funded by Dow Chemical Company and NSF Grant No. CBET-1511450.

  7. Hard-sphere limit of soft-sphere model for granular materials: stiffness dependence of steady granular flow.

    Science.gov (United States)

    Mitarai, Namiko; Nakanishi, Hiizu

    2003-02-01

    Dynamical behavior of steady granular flow is investigated numerically in the inelastic hard-sphere limit of the soft-sphere model. We find distinctively different limiting behaviors for the two flow regimes, i.e., the collisional flow and the frictional flow. In the collisional flow, the hard-sphere limit is straightforward; the number of collisions per particle per unit time converges to a finite value and the total contact time fraction with other particles goes to zero. For the frictional flow, however, we demonstrate that the collision rate diverges as the power of the particle stiffness so that the time fraction of the multiple contacts remains finite even in the hard-sphere limit, although the contact time fraction for the binary collisions tends to zero.

  8. Discharge flow of granular media from silos with a lateral orifice and injection of air

    Directory of Open Access Journals (Sweden)

    Aussillous Pascale

    2017-01-01

    Full Text Available Few studies concern the prediction of the mass flow rate of a granular media discharged from a silo with a lateral orifice. However, this situation can have pratical interest considering a tank of granular material with a leak on its side. We studied experimentally the discharge of a vertical silo filled by spherical glass beads. We consider rectangular silos with a rectangular orifice. The impact of size, aspect ratio and position of the orifice and the effect of an additional air flow were studied. The measured parameters are the mass flow rate and the pressure along the silo, whereas the controlled parameters are the size of particles, and the flow rate of air. We identified two regimes of discharge according to the aspect ratio (of width to height of the rectangular orifice. Increasing the air flow rate induces an increase of the granular media flow rate. Using a simple physical model to describe the grains and gas flow, we put in evidence the role played by the air pressure gradient at the outlet. Then we compared the experimental results with continuum Navier-Stokes simulations with the granular μ(I-rheology. We showed that the continuum μ(I-rheology describes well our discharge flow of granular media from silos, taking into account the effect of the position of the orifice as well as the coupling with the gas flow.

  9. 准静态颗粒流流动规律的热力学分析%Non-equilibrium thermo dynamic analysis of quasi-static granular flows

    Institute of Scientific and Technical Information of China (English)

    刘中淼; 孙其诚; 宋世雄; 史庆藩

    2014-01-01

    本文分析了颗粒流的介观结构及其特征,提出了颗粒流的双颗粒温度概念T kin 和T conf,表征颗粒无序运动和构型无序演化的程度;进而作为非平衡变量,与经典非平衡热力学(classical irreversible thermodynamics, CIT)变量共同构成颗粒流的热力学状态变量集,确定了颗粒流的能量转换规律和熵产生率等,发展了颗粒流双颗粒温度(two granular temperate, TGT)模型。以体积恒定的简单剪切准静态颗粒流为例,结合离散元模拟(discrete element method, DEM),确定了双颗粒温度模型所需的材料参数,分析了颗粒流发展段的规律和稳恒段的有效摩擦系数。%Granular flow is usually divided into three kinds of flow pattern, namely quasi static flow, slow flow, and rapid flow. The core issue of the research is the constitutive relation. A series of constitutive relations of application value have been received up to now, however, the study on principal theory is insufficient. Granular flow has an emergent mesoscopic structure, such as force chain network and vortex, involving complex irreversible processes. This paper studies its mesoscopic structure and principal characters, introduces the concept of two granular temperatures T conf and T kin of the granular flow to characterize the degree of chaotic motion and disordered configuration evolution, sets them as the non-equilibrium variables to constitute the thermodynamic state variables set for granular flow with the classical irreversible thermodynamic (CIT) variables, also determines the granular flow law of energy conversion and the entropy production rate, etc., and develops the two granular temperatures (TGT) model. Taking the simple shear quasi-static granular flow in a constant volume as example, and combining it with the discrete element method (DEM), this work confirms the material parameters needed for the TGT model, and analyzes the law of developing period and the effective coefficient of

  10. A Low-Dissipation Technique for Computing Dense Granular Compressible Flows with Shock Waves

    CERN Document Server

    Houim, Ryan W

    2013-01-01

    A low-dissipation numerical method was developed for solving kinetic theory-based granular multiphase models with volume fractions ranging from very dilute to very dense in highly compressible flows containing shock waves. The proposed numerical method takes advantage of particle incompressibility and allows computation of gas-phase and granular-phase hyperbolic fluxes to be decoupled while treating non-conservative terms consistent with their physical meaning. The technique converges under grid refinement even with very high volume fraction granular interfaces and is compatible with high-order numerical algorithms. The method can advect sharp granular interfaces that coincide with multi-species gaseous contacts without violating the pressure non-disturbing conditions. The method also reproduces features from multiphase shock tube problems, granular shocks, transmission angles of compaction waves, and shock wave and dust layer interactions. The proposed scheme is relatively straight-forward to implement and c...

  11. An inversion method to extract basal friction law of granular flows and snow avalanches

    Science.gov (United States)

    Pulfer, Gaëtan; Thibert, Emmanuel; Naaim, Mohamed

    2015-04-01

    The aim of this work is to develop an inversion method allowing to extract basal friction parameters from snow avalanches. To develop this method, granular flows on an incline covered by sand paper (typical roughness size is 500µm) are used. The granular material is composed of glass beads of 1.1 mm diameter. A controlled volume of granular material is released by retracting a gate of 35 mm height. On the upper and steepest part of the incline, the front velocity of the flow is measured by image capture (30 frames/s). At three locations, the flow height and the Lagrangian velocity are measured with infrared distance sensors and the Particle Image Velocimetry technics, respectively. On the lower and less steep part of the rough incline where granular flow decelerates and stops, the front velocity is also measured by image capture. The shape and the thickness of the deposit is determined with an accurate four fringe shifted Moiré method. A Saint-Venant code is used as a direct model to simulate the granular experiments. From the measurements and an optimization/inversion method, best estimates of basal friction parameters are extracted. In order to discuss and validate this inverse approach, an external determination of the rheology of the granular material is performed using Hstart and Hstop curves constructed under the same basal surface roughness.

  12. Packing induced bistable phenomenon in granular flow:analysis from complex network perspective

    Institute of Scientific and Technical Information of China (English)

    胡茂彬; 刘启一; 孙王平; 姜锐; 吴清松

    2014-01-01

    The effects of packing configurations on the phase transition of straight granular chute flow with two bottlenecks are studied. The granular flow shows a dilute-to-dense flow transition when the channel width is varied, accompanied with a peculiar bistable phenomenon. The bistable phenomenon is induced by the initial packing config-uration of particles. When the packing is dense, the initial flux is small and will induce a dense flow. When the packing is loose, the initial flux is large and will induce a di-lute flow. The fabric network of granular packing is analyzed from a complex network perspective. The degree distribution shows quantitatively different characteristics for the configurations. A two-dimensional (2D) packing clustering coefficient is defined to better quantify the fabric network.

  13. Relevance of visco-plastic theory in a multi-directional inhomogeneous granular flow

    Science.gov (United States)

    Cortet, P.-P.; Bonamy, D.; Daviaud, F.; Dauchot, O.; Dubrulle, B.; Renouf, M.

    2009-10-01

    We confront a recent visco-plastic description of dense granular flows (Jop P. et al., Nature, 441 (2006) 727) with multi-directional inhomogeneous steady flows observed in non-smooth contact dynamics simulations of 2D half-filled rotating drums. Special attention is paid to check separately the two underlying fundamental statements into which the considered theory can be recast, namely i) a single relation between the invariants of stress and strain rate tensors and ii) the alignment between these tensors. Interestingly, the first prediction is fairly well verified over more than four decades of small strain rate, from the surface rapid flow to the quasi-static creep phase, where it is usually believed to fail because of jamming. On the other hand, the alignment between stress and strain rate tensors is shown to fail over the whole flow, what yields an apparent violation of the visco-plastic rheology when applied without care. In the quasi-static phase, the particularly large misalignment is conjectured to be related to transient dilatancy effects.

  14. Failure Mechanism of True 2D Granular Flows

    CERN Document Server

    Nguyen, Cuong T; Fukagawa, R

    2015-01-01

    Most previous experimental investigations of two-dimensional (2D) granular column collapses have been conducted using three-dimensional (3D) granular materials in narrow horizontal channels (i.e., quasi-2D condition). Our recent research on 2D granular column collapses by using 2D granular materials (i.e., aluminum rods) has revealed results that differ markedly from those reported in the literature. We assume a 2D column with an initial height of h0 and initial width of d0, a defined as their ratio (a =h0/d0), a final height of h , and maximum run-out distance of d . The experimental data suggest that for the low a regime (a 0.65), the ratio of a to (d-d0)/d0, h0/h , or d/d0 is expressed by power-law relations. In particular, the following power-function ratios (h0/h=1.42a^2/3 and d/d0=4.30a^0.72) are proposed for every a >0.65. In contrast, the ratio (d-d0)/d0=3.25a^0.96 only holds for 0.651.5. In addition, the influence of ground contact surfaces (hard or soft beds) on the final run-out distance and destru...

  15. New advance on non-hydrostatic shallow granular flow model in a global Cartesian coordinate system

    CERN Document Server

    Yuan, L; Zhai, J; Wu, S F; Patra, A K; Pitman, E B

    2016-01-01

    Mathematical modeling of granular avalanche flows over a general topography needs appropriate forms of shallow granular flow models. Current shallow granular flow models suited to arbitrary topography can be grossly divided into two types, those formulated in bed-fitted curvilinear coordinates (e.g., Ref.~\\cite{{Puda2003}}), and those formulated in global Cartesian coordinates (e.g., Refs.~\\cite{{Bouchut2004},{Denlinger2004},{Castro2014}}). In the recent years, several improvements have been made in global Cartesian formulations for shallow granular flows. In this paper, we first perform a review of the Cartesian model of Denlinger and Iverson \\cite{Denlinger2004} and the Cartesian Boussinesq-type granular flow theory of Castr-Ogaz \\emph{et al.} \\cite{Castro2014}. Both formulations account for the effect of nonzero vertical acceleration on depth-averaged momentum fluxes and stress states. We then further calculate the vertical normal stress of Castr-Ogaz \\emph{et al.}~\\cite{Castro2014} and the basal normal st...

  16. Multi-scale coupling strategy for fully two-dimensional and depth-averaged models for granular flows

    Science.gov (United States)

    Pudasaini, Shiva P.; Domnik, Birte; Miller, Stephen A.

    2013-04-01

    We developed a full two-dimensional Coulomb-viscoplastic model and applied it for inclined channel flows of granular materials from initiation to their deposition. The model includes the basic features and observed phenomena in dense granular flows like the exhibition of a yield strength and a non-zero slip velocity. A pressure-dependent yield strength is proposed to account for the frictional nature of granular materials. The yield strength can be related to the internal friction angle of the material and plays an important role, for example, in deposition processes. The interaction of the flow with the solid boundary is modelled by a pressure and rate-dependent Coulomb-viscoplastic sliding law. We developed an innovative multi-scale strategy to couple the full two-dimensional, non depth-averaged model (N-DAM) with a one-dimensional, depth-averaged model (DAM). The coupled model reduces computational complexity dramatically by using DAM only in regions with smooth changes of flow variables. The numerics uses N-DAM in regions where depth-averaging becomes inaccurate, for instance, in the initiation and deposition regions, and (particularly) when the flow hits an obstacle or a defense structure. In these regions, momentum transfer must be, and is, considered in all directions. We observe very high coupling performance, and show that the numerical results deviate only slightly from results of the much more cumbersome full two-dimensional model. This shows that the coupled model, which retains all the basic physics of the flow, is an attractive alternative to an expensive, full two-dimensional simulations. We compare simulation results with different experimental data for shock waves appearing in rapid granular flows down inclined channels and impacting a wall. The model predicts the evolution of the strong shock wave and the impact force on a rigid wall for different inclination angles and sliding surfaces. It is demonstrated that the internal friction angle plays an

  17. Predictive simulation of granular flows applied to compressible multiphase flow modeling

    Science.gov (United States)

    Goetsch, Ryan J.; Regele, Jonathan D.

    2014-11-01

    Multiphase flows have been an active area of research for decades due to their complex nature and occurrence in many engineering applications. However, little information exists about the dense compressible flow regime. Recent experimental work [Wagner et al., Exp. Fluids 52, 1507 (2012)] using a multiphase shock tube has studied gas-solid flows with high solid volume fractions (α = 0 . 2) by measuring shock wave-particle cloud interactions. It is still unclear what occurs at the particle scale inside and behind the particle cloud during this interaction. The objective of this work is to perform direct numerical simulations to understand this phenomena. With this goal in mind, a discrete element method (DEM) solver was developed to predict the properties of a particle cloud formed by gravity driven granular flow through a slit opening. For validation purposes, the results are compared with experimental channel flow data. It is found that the mean velocity profile and mass flow rates correlate well with the experiment, however the fluctuation velocities are significantly under-predicted for both smooth and rough wall cases.

  18. Axisymmetric Granular Collapse: A Transient 3D Flow Test of Viscoplasticity

    Science.gov (United States)

    Lacaze, Laurent; Kerswell, Rich R.

    2009-03-01

    A viscoplastic continuum theory has recently been proposed to model dense, cohesionless granular flows [P. Jop , Nature (London)NATUAS0028-0836 441, 727 (2006)10.1038/nature04801]. We confront this theory for the first time with a transient, three-dimensional flow situation—the simple collapse of a cylinder of granular matter onto a horizontal plane—by extracting stress and strain rate tensors directly from soft particle simulations. These simulations faithfully reproduce the different flow regimes and capture the observed scaling laws for the final deposit. Remarkably, the theoretical hypothesis that there is a simple stress-strain rate tensorial relationship does seem to hold across the whole flow even close to the rough boundary provided the flow is dense enough. These encouraging results suggest viscoplastic theory is more generally applicable to transient, multidirectional, dense flows and open the way for quantitative predictions in real applications.

  19. Rarefaction effects in dilute granular Poiseuille flow: Knudsen minimum and temperature bimodality

    Science.gov (United States)

    Mahajan, Achal; Alam, Meheboob

    2015-11-01

    The gravity-driven flow of smooth inelastic hard-disks through a channel, analog of granular Poiseuille flow, is analysed using event-driven simulations. We find that the variation of the mass-flow rate (Q) with Knudsen number (Kn) can be non-monotonic in the elastic limit (i.e. the restitution coefficient en --> 1) in channels with very smooth walls. The Knudsen minimum effect (i.e. the minimum flow rate occurring at Kn ~ O (1) for the Poiseuille flow of a molecular gas) is found to be absent in a granular gas with en competition between dissipation and rarefaction seems to be responsible for the observed dependence of both mass-flow rate and temperature bimodality on Kn and en . [Alam etal. 2015, JFM (revised)].

  20. The respective roles of bulk friction and slip velocity during a granular mass flow

    Science.gov (United States)

    Staron, Lydie

    2016-04-01

    Catastrophic granular mass flows form an important natural hazard. Mitigation has motivated numerous studies on the properties of natural granular flows, and in particular, their ability to travel long distances away from the release point. The mobility of granular flows is commonly characterised through the definition of rheological properties and effective friction. Yet, it is widely accepted that the description in term of effective friction may include various lubrication effects, softening at the base of the flow and large slip velocities being a most likely one. In this case, flow bulk properties may obliterate the flow boundary conditions. In this contribution, we investigate how disentangling bulk properties from boundary conditions may improve our understanding of the flow. Using discrete simulations, we induce increasing slip velocities in different flow configurations. We show that increased mobility may be achieved without changing bulk properties. The results are interpreted in terms of a Robin-Navier slip condition and implemented in a continuum Navier-Stokes solver. We quantify the respective role of rheological bulk properties and boundary conditions in the general behaviour of a transient mass flow. We show that omitting the description of boundary conditions leads to misinterpretation of the flow properties. The outcome is discussed in terms of models reliability. References P.-Y. Lagrée et al, The granular column collapse as a continuum: validity of a two-dimensional Navier-Stokes model with the mu(I) rheology, J. Fluid Mech. 686, 378-408 (2011) L. Staron and E. Lajeunesse, Understanding how the volume affects the mobility of dry debris flows, Geophys. Res. Lett. 36, L12402 (2009) L. Staron, Mobility of long-runout rock flows: a discrete numerical investigation, Geophys. J. Int. 172, 455-463 (2008)

  1. Physically-based modelling of granular flows with Open Source GIS

    Directory of Open Access Journals (Sweden)

    M. Mergili

    2012-01-01

    Full Text Available Computer models, in combination with Geographic Information Sciences (GIS, play an important role in up-to-date studies of travel distance, impact area, velocity or energy of granular flows (e.g. snow or rock avalanches, flows of debris or mud. Simple empirical-statistical relationships or mass point models are frequently applied in GIS-based modelling environments. However, they are only appropriate for rough overviews at the regional scale. In detail, granular flows are highly complex processes and physically-based, distributed models are required for detailed studies of travel distance, velocity, and energy of such phenomena. One of the most advanced theories for understanding and modelling granular flows is the Savage-Hutter type model, a system of differential equations based on the conservation of mass and momentum. The equations have been solved for a number of idealized topographies, but only few attempts to find a solution for arbitrary topography or to integrate the model with GIS are known up to now. The work presented is understood as an initiative to integrate a fully physically-based model for the motion of granular flows, based on the extended Savage-Hutter theory, with GRASS, an Open Source GIS software package. The potentials of the model are highlighted, employing the Val Pola Rock Avalanche (Northern Italy, 1987 as the test event, and the limitations as well as the most urging needs for further research are discussed.

  2. Physically-based modelling of granular flows with Open Source GIS

    Science.gov (United States)

    Mergili, M.; Schratz, K.; Ostermann, A.; Fellin, W.

    2012-01-01

    Computer models, in combination with Geographic Information Sciences (GIS), play an important role in up-to-date studies of travel distance, impact area, velocity or energy of granular flows (e.g. snow or rock avalanches, flows of debris or mud). Simple empirical-statistical relationships or mass point models are frequently applied in GIS-based modelling environments. However, they are only appropriate for rough overviews at the regional scale. In detail, granular flows are highly complex processes and physically-based, distributed models are required for detailed studies of travel distance, velocity, and energy of such phenomena. One of the most advanced theories for understanding and modelling granular flows is the Savage-Hutter type model, a system of differential equations based on the conservation of mass and momentum. The equations have been solved for a number of idealized topographies, but only few attempts to find a solution for arbitrary topography or to integrate the model with GIS are known up to now. The work presented is understood as an initiative to integrate a fully physically-based model for the motion of granular flows, based on the extended Savage-Hutter theory, with GRASS, an Open Source GIS software package. The potentials of the model are highlighted, employing the Val Pola Rock Avalanche (Northern Italy, 1987) as the test event, and the limitations as well as the most urging needs for further research are discussed.

  3. Effects of cohesion on the flow patterns of granular materials in spouted beds

    Science.gov (United States)

    Zhu, Runru; Li, Shuiqing; Yao, Qiang

    2013-02-01

    Two-dimensional spouted bed, capable to provide both dilute granular gas and dense granular solid flow patterns in one system, was selected as a prototypical system for studying granular materials. Effects of liquid cohesion on such kind of complex granular patterns were studied using particle image velocimetry. It is seen that the addition of liquid oils by a small fraction of 10-3-10-2 causes a remarkable narrowing (about 15%) of the spout area. In the dense annulus, as the liquid fraction increases, the downward particle velocity gradually decreases and approaches a minimum where, at a microscopic grain scale, the liquid bridge reaches spherical regimes with a maximum capillarity. Viscous lubrication effect is observed at a much higher fraction but is really weak with respect to the capillary effect. In the dilute spout, in contrast to the dry grains, the wet grains have a lightly smaller acceleration in the initial 1/3 of the spout, but have a dramatically higher acceleration in the rest of the spout. We attribute the former to the additional work needed to overcome interparticle cohesion during particle entrainment at the spout-annulus interface. Then, using mass and momentum balances, the latter is explained by the relative higher drag force resulting from both higher gas velocities and higher voidages due to spout narrowing in the wet system. The experimental findings will provide useful data for the validation of discrete element simulation of cohesive granular-fluid flows.

  4. Dense granular flow rheology in turbulent bedload transport

    CERN Document Server

    Maurin, Raphael; Frey, Philippe

    2016-01-01

    The local granular rheology is investigated numerically in idealised turbulent bedload transport configurations. Using a coupled fluid-discrete element model, the stress tensor is computed as a function of the depth for a series of simulations varying the Shields number, the specific density and the particle diameter. The results are analyzed in the framework of the $\\mu(I)$ rheology and exhibit a collapse of both the shear to normal stress ratio and the solid volume fraction over a wide range of inertial numbers. The effect of the interstitial fluid on the granular rheology is shown to be negligible, supporting recent work suggesting the absence of a clear transition between the free-fall and the turbulent regime. In addition, the data collapse is observed up to unexpectedly high inertial numbers $I\\sim2$, challenging the existing conceptions and parametrization of the $\\mu(I)$ rheology. Focusing upon bedload transport modelling, the results are pragmatically analyzed in the $\\mu(I)$ framework in order to pr...

  5. Monodisperse granular flows in viscous dispersions in a centrifugal acceleration field

    Science.gov (United States)

    Cabrera, Miguel Angel; Wu, Wei

    2016-04-01

    Granular flows are encountered in geophysical flows and innumerable industrial applications with particulate materials. When mixed with a fluid, a complex network of interactions between the particle- and fluid-phase develops, resulting in a compound material with a yet unclear physical behaviour. In the study of granular suspensions mixed with a viscous dispersion, the scaling of the stress-strain characteristics of the fluid phase needs to account for the level of inertia developed in experiments. However, the required model dimensions and amount of material becomes a main limitation for their study. In recent years, centrifuge modelling has been presented as an alternative for the study of particle-fluid flows in a reduced scaled model in an augmented acceleration field. By formulating simple scaling principles proportional to the equivalent acceleration Ng in the model, the resultant flows share many similarities with field events. In this work we study the scaling principles of the fluid phase and its effects on the flow of granular suspensions. We focus on the dense flow of a monodisperse granular suspension mixed with a viscous fluid phase, flowing down an inclined plane and being driven by a centrifugal acceleration field. The scaled model allows the continuous monitoring of the flow heights, velocity fields, basal pressure and mass flow rates at different Ng levels. The experiments successfully identify the effects of scaling the plastic viscosity of the fluid phase, its relation with the deposition of particles over the inclined plane, and allows formulating a discussion on the suitability of simulating particle-fluid flows in a centrifugal acceleration field.

  6. Segregation-induced fingering instabilities in granular free-surface flows

    NARCIS (Netherlands)

    Woodhouse, M.J.; Thornton, A.R.; Johnson, C.G.; Kokelaar, B.P.; Gray, J.M.N.T.

    2012-01-01

    Particle-size segregation can have a significant feedback on the bulk motion of granular avalanches when the larger grains experience greater resistance to motion than the fine grains. When such segregation-mobility feedback effects occur the flow may form digitate lobate fingers or spontaneously se

  7. Experiments using non-intrusive particle tracing techniques for granular chute flows. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Rosato, A.D.; Dave, R.N.; Fischer, I.S.

    1998-12-31

    The objective of this contract was to develop a system capable of non-intrusively tracking the motion of an individual particle for the study of granular flows down inclined chutes. The result of the project is a system capable of following the three-dimensional translational and rotational motion of an individual particle embedded with a flowing granular material. The basic system consists of a sphere embedded with three orthogonal transmitters emitting at different frequencies which induce voltages in an antenna array surrounding the flow regime. Analysis of the induced voltage signals within the framework of a derived model yields both the position and orientation of the sphere. Tests were performed in a small scale model chute as well as in a cylindrical vibrated granular bed, which clearly demonstrates the capability of the system. As a result of discussions at meetings held semi-annually for the Granular Flow Advanced Research Objectives (GFARO) contractors, it was deemed necessary to pursue an additional experimental program as part of this contract related to the measurement of sphere collision properties. The outcome of the work (reported in Appendix C) is the determination of certain properties which are needed for use in computer simulations and theory.

  8. On possible flow back in vertical screw conveyors for cohesionless granular materials

    NARCIS (Netherlands)

    Rademacher, F.J.C.

    1981-01-01

    Conditions for which back flow will be initiated in vertical screw conveyors conveying cohesionless granular material are theoretically established. Use is made of existing knowledge of the performance characteristics of such conveyors. Provided the conveyor is operated at not too low an angular spe

  9. Dispersed plug flow model for upflow anaerobic sludge bed reactors with focus on granular sludge dynamics

    NARCIS (Netherlands)

    Kalyuzhnyi, S.V.; Fedorovich, V.V.; Lens, P.N.L.

    2006-01-01

    A new approach to model upflow anaerobic sludge bed (UASB)-reactors, referred to as a one-dimensional dispersed plug flow model, was developed. This model focusses on the granular sludge dynamics along the reactor height, based on the balance between dispersion, sedimentation and convection using on

  10. Granular-flow rheology: Role of shear-rate number in transition regime

    Science.gov (United States)

    Chen, C.-L.; Ling, C.-H.

    1996-01-01

    This paper examines the rationale behind the semiempirical formulation of a generalized viscoplastic fluid (GVF) model in the light of the Reiner-Rivlin constitutive theory and the viscoplastic theory, thereby identifying the parameters that control the rheology of granular flow. The shear-rate number (N) proves to be among the most significant parameters identified from the GVF model. As N ??? 0 and N ??? ???, the GVF model can reduce asymptotically to the theoretical stress versus shear-rate relations in the macroviscous and graininertia regimes, respectively, where the grain concentration (C) also plays a major role in the rheology of granular flow. Using available data obtained from the rotating-cylinder experiments of neutrally buoyant solid spheres dispersing in an interstitial fluid, the shear stress for granular flow in transition between the two regimes proves dependent on N and C in addition to some material constants, such as the coefficient of restitution. The insufficiency of data on rotating-cylinder experiments cannot presently allow the GVF model to predict how a granular flow may behave in the entire range of N; however, the analyzed data provide an insight on the interrelation among the relevant dimensionless parameters.

  11. Numerical simulation of two-dimensional granular shearing flows and the friction force of a moving slab on the granular media

    Institute of Scientific and Technical Information of China (English)

    Cai Qing-Dong; Chen Shi-Yi; Sheng Xiao-Wei

    2011-01-01

    This paper studies some interesting features of two-dimensional granular shearing flow by using molecular dynamic approach for a specific granular system. The obtained results show that the probability distribution function of velocities of particles is Gaussian at the central part, but diverts from Gaussian distribution nearby the wall. The macroscopic stress along the vertical direction has large fluctuation around a constant value, the non-zero average velocity occurs mainly near the moving wall, which forms a shearing zone. . In the shearing movement, the volume of the granular material behaves in a random manner. The equivalent friction coefficient between moving slab and granular material correlates with the moving speed at low velocity, and approaches constant as the velocity is large enough.

  12. Fluctuations of Internal Energy Flow in a Vibrated Granular Gas

    Science.gov (United States)

    Puglisi, Andrea; Visco, Paolo; Barrat, Alain; Trizac, Emmanuel; van Wijland, Frédéric

    2005-09-01

    The nonequilibrium fluctuations of power flux in a fluidized granular media have been recently measured in an experiment [Phys. Rev. Lett. 92, 164301 (2004)PRLTAO0031-900710.1103/PhysRevLett.92.164301], which was announced to be a verification of the fluctuation relation (FR) by Gallavotti and Cohen. An effective temperature was also identified and proposed to be a useful probe for such nonequilibrium systems. We explain these results in terms of a two-temperature Poisson process. Within this model, supported by independent molecular dynamics simulations, power flux fluctuations do not satisfy the FR and the nature of the effective temperature is clarified. In the pursuit of a hypothetical global quantity fulfilling the FR, this points to the need of considering candidates other than the power flux.

  13. Onset of motion at the surface of a porous granular bed by a shearing fluid flow

    Science.gov (United States)

    Hong, Anyu; Tao, Mingjiang; Kudrolli, Arshad

    2014-03-01

    We will discuss an experimental investigation of the onset of particle motion by a fluid flow over an unconsolidated granular bed. This situation arises in a number of natural and industrial processes including wind blowing over sand, sediment transport in rivers, tidal flows interacting with beaches and flows in slurry pipelines and mixing tanks. The Shields criteria given by the ratio of the viscous shear and normal stresses is used to understand the onset of motion. However, reviews reveals considerable scatter while noting broad trends with Reynolds Number. We discuss an idealized model system where fluid flows with a prescribed flow rate through a horizontal rectangular pipe initially fully filled with granular beads. The granular bed height decreases and reaches a constant height when the shear stress at the boundary decreases below a critical value. We compare and contrast the values obtained assuming no-slip boundary conditions with those observed with PIV using florescent tracer particles to measure the actual fluid flow profile near the porous interface. We will also report the observed variation of the Shields criteria with particle Reynolds Number by varying particle size and fluid flow rates.

  14. Granular flows down inclined and vibrated planes: influence of basal friction

    Directory of Open Access Journals (Sweden)

    Gaudel Naïma

    2017-01-01

    Full Text Available We present an experimental study about granular avalanches when external mechanical vibrations are applied. The results of the flow properties highlight the existence of two distinct regimes: (i a gravity-driven regime at large angles where scaling laws are in agreement with those reported in the literature for non-vibrating granular flows and (ii a vibration-driven regime at small angles where no flow occurs without applied vibrations. The flow in this regime is well described by a vibrationinduced activated process. We also propose an empirical law to capture the evolution of the thickness of the deposits as a function of the vibration intensity and the inclination angle.

  15. The impact of fluid flow on force chains in granular media

    Science.gov (United States)

    Mahabadi, Nariman; Jang, Jaewon

    2017-01-01

    Fluid flow through granular media is an important process found in nature and various engineering applications. The effect of fluid flow on the evolution of force chains in the granular media is explored using the photoelasticity theory. A transparent cell is designed to contain several photoelastic disks of different sizes and to allow fluid flow through the particle packing. Water is injected into the cell while the particle packing is under confining stress. Several images are taken for the conditions of different confining stresses and fluid injection rates. An algorithm of an image processing technique is developed to detect the orientation and magnitude of contact forces. The results show that forces in parallel and transverse to the flow direction increase with increasing water velocity, while parallel force shows a higher increasing rate.

  16. Investigation of proper modeling of very dense granular flows in the recirculation system of CFBs

    Institute of Scientific and Technical Information of China (English)

    Aristeidis Nikolopoulos; Nikos Nikolopoulos; Nikos Varveris; Sotirios Karellas; Panagiotis Grammelis; Emmanuel Kakaras

    2012-01-01

    The aim of this paper is the development of new models and/or the improvement of existing numerical models,used for simulating granular flow in CFB (circulating fluidized bed) recirculation systems.Most recent models follow the TFM (two-fluid model) methodology,but they cannot effectively simulate the inter-particle friction forces in the recirculation system,because the respective stress tensor does not incorporate compressibility of flow due to change of effective particle density.As a consequence,the induced normal and shear stresses are not modeled appropriately during the flow of the granular phase in the CFB recirculation system.The failure of conventional models,such as that of von Mises/Coulomb,is mainly caused by false approximation of the yield criterion which is not applicable to the CFB recirculation system.The present work adopts an alternative yield function,used for the first time in TFM Eulerian modeling.The proposed model is based on the Pitman-Schaeffer-Gray-Stiles yield criterion.Both the temporal deformation of the solid granular phase and the repose angle that the granular phase forms are more accurately simulated by this model.The numerical results of the proposed model agree well with experimental data,implying that frictional forces are efficiently simulated by the new model.

  17. Influence of vibration on granular flowability and its mechanism of aided flow

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Regarding flowing granular media as weak transverse isotropic media, the phase velocity expressions of wave P, wave SH and wave SV were deduced, the propagation characteristics of waves in flowing granular media were analyzed. The experiments show that vibration has great influence on granular fluidity. The wavefront of wave P is elliptic or closely elliptic, the wavefront of wave SH is elliptic, and the wavefront of wave SV is not elliptic. Wave propagation in the granular flowing field attenuates layer after layer. The theory and experiment both substantiate that the density difference is the key factor which leads to the attenuation of vibrating energy. In terms of characteristics of wave propagation one can deduce that vibrating waves have less influence on flowability of granules when the amplitude and frequency are small. However, when the amplitude and frequency increase gradually, the eccentricity of ellipsoid, the viscosity resistance and inner friction among granules, and shear intensity of granules decrease, and the loosening coefficient of granules increases, which shows the granules have better flowability.

  18. Flow Characteristics and Grain Size Distribution of Granular Gangue Mineral by Compaction Treatment

    Directory of Open Access Journals (Sweden)

    Ran Yuan

    2017-01-01

    Full Text Available A test system for water flow in granular gangue mineral was designed to study the flow characteristics by compaction treatment. With the increase of the compaction displacement, the porosity decreases and void in granular gangue becomes less. The main reason causing initial porosity decrease is that the void of larger size is filled with small particles. Permeability tends to decrease and non-Darcy flow factor increases under the compaction treatment. The change trend of flow characteristics shows twists and turns, which indicate that flow characteristics of granular gangue mineral are related to compaction level, grain size distribution, crushing, and fracture structure. During compaction, larger particles are crushed, which in turn causes the weight of smaller particles to increase, and water flow induces fine particles to migrate (weight loss; meanwhile, a sample with more weight of size (0–2.5 mm has a higher amount of weight loss. Water seepage will cause the decrease of some chemical components, where SiO2 decreased the highest in these components; the components decreased are more likely locked at fragments rather than the defect of the minerals. The variation of the chemical components has an opposite trend when compared with permeability.

  19. Onset of Stationary Flows of a Cohesive Granular Material in a Channel

    Science.gov (United States)

    de Ryck, A.; Louisnard, O.

    The handling of bulk materials and powders in process engineering remains an important issue. To obtain reliable gravitational flows, starting and remaining stationary, the hoppers and transport channels must be designed at a scale appropriate for the friction and cohesive properties of the granular material. To describe such dense flows (the interaction with the surrounding ambient fluid is negligible compared to the weight of the particles and interparticles forces), they can be modelled by continuum mechanics, associated with a constitutive equation taking into account the friction behaviour (Mohr-Coulomb or Druger-Prager plasticity criterion). We use here the rheology proposed by Jop et al. (Nature 441: 727-730, 2006) which combines this with an associated flow rule (co-linearity of the stress and strain tensors) (Jenike, Powder Technol. 50: 229-236, 1987) and a viscous dependency of the coefficient of friction on the strain (Da Cruz et al., Phys. Rev. E 72: 021309, 2005).Using the method of characteristics to describe the flow structure (de Ryck, Granular Matter 10: 361-367, 2008), we deduce the minimal slope to obtain a stationary flow of cohesive granular materials on a finite width channel, whose lateral walls are rough or smooth. We also obtain the depth of the flow (maximal at the centre of the channel). In the case of weak cohesive materials, these results are formulated with simple analytical expressions.

  20. Characterization of granular flows from seismic signal: insights from laboratory experiments

    Science.gov (United States)

    Farin, M.; Mangeney, A.; Toussaint, R.; de Rosny, J.

    2015-12-01

    Landslides, rock avalanche and debris flows represent a major natural hazard in steep landscapes. Recent studies showed that the seismic signal generated by these events can provide quantitative information on their location and amplitude. However, owing to the lack of visual observations, the dynamics of gravitational events is still not well understood. A burning challenge is to establish relations between the characteristics of the landslide (volume, speed, runout distance,...) and that of the emitted seismic signal (maximum amplitude, seismic energy, frequencies,...) Laboratory experiments of granular columns collapse are conducted on an inclined plane. The seismic signal generated by the collapse is recorded by piezoelectric accelerometers sensitive in a wide frequency range (1 Hz - 56 kHz). The granular column is constituted with steel beads of same diameter, between 1 mm and 3 mm that are initially contained in a cylinder. The column collapses when the cylinder is removed. A layer of steel beads is glued on the surface of the plane to provide basal roughness. For horizontal granular flows, we show that it is possible to distinguish the phases of acceleration and deceleration of the flow in the emitted seismic signal. Indeed, the signal envelope is symmetrical with respect to its maximum, separating the acceleration from the deceleration. When the slope angle increases, we observe that the signal envelope looses its symmetry: it stays unchanged during the acceleration but it is significantly extended during the deceleration. In addition, we propose a semi-empirical scaling law to describe the increase of the elastic energy radiated by a granular flow when the slope angle increases. The fit of this law with the seismic data allows us to retrieve the friction angle of the granular material, which is a crucial rheological parameter. Finally, we show that the ratio of the radiated elastic energy over the potential energy lost of granular flows, i.e. their seismic

  1. Rheology of cohesive granular materials across multiple dense-flow regimes.

    Science.gov (United States)

    Gu, Yile; Chialvo, Sebastian; Sundaresan, Sankaran

    2014-09-01

    We investigate the dense-flow rheology of cohesive granular materials through discrete element simulations of homogeneous, simple shear flows of frictional, cohesive, spherical particles. Dense shear flows of noncohesive granular materials exhibit three regimes: quasistatic, inertial, and intermediate, which persist for cohesive materials as well. It is found that cohesion results in bifurcation of the inertial regime into two regimes: (a) a new rate-independent regime and (b) an inertial regime. Transition from rate-independent cohesive regime to inertial regime occurs when the kinetic energy supplied by shearing is sufficient to overcome the cohesive energy. Simulations reveal that inhomogeneous shear band forms in the vicinity of this transition, which is more pronounced at lower particle volume fractions. We propose a rheological model for cohesive systems that captures the simulation results across all four regimes.

  2. Helical inner-wall texture prevents jamming in granular pipe flows.

    Science.gov (United States)

    Verbücheln, Felix; Parteli, Eric J R; Pöschel, Thorsten

    2015-06-07

    Granular pipe flows are characterized by intermittent behavior and large, potentially destructive solid fraction variations in the transport direction. By means of particle-based numerical simulations of gravity-driven flows in vertical pipes, we show that it is possible to obtain steady material transport by adding a helical texture to the inner-wall of the pipe. The helical texture leads to a more homogeneous mass flux along the pipe, prevents the emergence of large density waves and substantially reduces the probability of plug formation thus avoiding jamming of the particulate flow. We show that the granular mass flux Q through a pipe of diameter D with a helical texture of wavelength λ follows the equation Q = Q0·{1 - B sin[arctan(2πD/λ)]}, where Q0 is the flow without helix, predicted from the well-known Beverloo equation. Our new expression yields, thus, a modification of the Beverloo equation with only one additional fit parameter, B, and describes the particle mass flux with the helical texture with excellent quantitative agreement with simulation results. Future application of the method proposed here has the potential to improve granular pipe flows in a broad range of processes without the need for energy input from any external source.

  3. Convection and fluidization in oscillatory granular flows: The role of acoustic streaming.

    Science.gov (United States)

    Valverde, Jose Manuel

    2015-06-01

    Convection and fluidization phenomena in vibrated granular beds have attracted a strong interest from the physics community since the last decade of the past century. As early reported by Faraday, the convective flow of large inertia particles in vibrated beds exhibits enigmatic features such as frictional weakening and the unexpected influence of the interstitial gas. At sufficiently intense vibration intensities surface patterns appear bearing a stunning resemblance with the surface ripples (Faraday waves) observed for low-viscosity liquids, which suggests that the granular bed transits into a liquid-like fluidization regime despite the large inertia of the particles. In his 1831 seminal paper, Faraday described also the development of circulation air currents in the vicinity of vibrating plates. This phenomenon (acoustic streaming) is well known in acoustics and hydrodynamics and occurs whenever energy is dissipated by viscous losses at any oscillating boundary. The main argument of the present paper is that acoustic streaming might develop on the surface of the large inertia particles in the vibrated granular bed. As a consequence, the drag force on the particles subjected to an oscillatory viscous flow is notably enhanced. Thus, acoustic streaming could play an important role in enhancing convection and fluidization of vibrated granular beds, which has been overlooked in previous studies. The same mechanism might be relevant to geological events such as fluidization of landslides and soil liquefaction by earthquakes and sound waves.

  4. A two-phase solid/fluid model for dense granular flows including dilatancy effects

    Science.gov (United States)

    Mangeney, Anne; Bouchut, Francois; Fernandez-Nieto, Enrique; Koné, El-Hadj; Narbona-Reina, Gladys

    2016-04-01

    Describing grain/fluid interaction in debris flows models is still an open and challenging issue with key impact on hazard assessment [{Iverson et al.}, 2010]. We present here a two-phase two-thin-layer model for fluidized debris flows that takes into account dilatancy effects. It describes the velocity of both the solid and the fluid phases, the compression/dilatation of the granular media and its interaction with the pore fluid pressure [{Bouchut et al.}, 2016]. The model is derived from a 3D two-phase model proposed by {Jackson} [2000] based on the 4 equations of mass and momentum conservation within the two phases. This system has 5 unknowns: the solid and fluid velocities, the solid and fluid pressures and the solid volume fraction. As a result, an additional equation inside the mixture is necessary to close the system. Surprisingly, this issue is inadequately accounted for in the models that have been developed on the basis of Jackson's work [{Bouchut et al.}, 2015]. In particular, {Pitman and Le} [2005] replaced this closure simply by imposing an extra boundary condition at the surface of the flow. When making a shallow expansion, this condition can be considered as a closure condition. However, the corresponding model cannot account for a dissipative energy balance. We propose here an approach to correctly deal with the thermodynamics of Jackson's model by closing the mixture equations by a weak compressibility relation following {Roux and Radjai} [1998]. This relation implies that the occurrence of dilation or contraction of the granular material in the model depends on whether the solid volume fraction is respectively higher or lower than a critical value. When dilation occurs, the fluid is sucked into the granular material, the pore pressure decreases and the friction force on the granular phase increases. On the contrary, in the case of contraction, the fluid is expelled from the mixture, the pore pressure increases and the friction force diminishes. To

  5. Discrete Element Simulation of Collision-Rich Dynamics of Wet Granular Flows Down an Inclined Channel

    Institute of Scientific and Technical Information of China (English)

    CHANG Wei-Tze; HSIEH Shang-Hsien; YANG Fu-Ling; CHEN Chuin-Shan

    2008-01-01

    This paper proposes a numerical scheme that employs the discrete element method (DEM) to simulate the motion of a wet granular flow down an inclined channel.To account for the liquid influences on the dynamics between paired particles,this paper presents a wet soft-sphere contact model with liquid-modified parameters.The developed scheme takes full advantage of DEM and avoids the expensive simula-tion of the solid-liquid interactions with conventional Navier-Stokes equation solver.This wet contact model has been implemented in an in-housed parallel discrete objects simulation system-KNIGHT and ANNE/IRIS口to compute the dynamic behaviors of both dry and wet granular particles flowing down an in-dined channel.

  6. Numerical Algorithms for Two-Dimensional Dry Granular Flow with Deformable Elastic Grain

    Energy Technology Data Exchange (ETDEWEB)

    Boateng, H A; Elander, V; Jin, C; Li, Y; Vasquez, P; Fast, P

    2005-08-11

    The authors consider the dynamics of interacting elastic disks in the plane. This is an experimentally realizable two-dimensional model of dry granular flow where the stresses can be visualized using the photoelastic effect. As the elastic disks move in a vacuum, they interact through collisions with each other and with the surrounding geometry. Because of the finite propagation speed of deformations inside each grain it can be difficult to capture computationally even simple experiments involving just a few interacting grains. The goal of this project is to improve our ability to simulate dense granular flow in complex geometry. They begin this process by reviewing some past work, how they can improve upon previous work. the focus of this project is on capturing the elastic dynamics of each grain in an approximate, computationally tractable, model that can be coupled to a molecular dynamics scheme.

  7. Capturing of the internal mechanics of liquid-granular flows comprised of polydisperse spherical particles

    Science.gov (United States)

    Gollin, Devis; Bowman, Elisabeth

    2017-06-01

    This paper presents a series of flume experiments designed to examine the motion and arrest of concentrated granular-fluid flows, with a view to understanding the role of polydispersity in debris flows. A non-intrusive technique is used to investigate the internal behaviour of small scale experimental flows. Three different particle size distributions comprised of polydisperse spherical particles and one with the finer component made of angular particles were analysed. The choice of using spherical shaped particles was made to improve the visualization of the internal mechanics without reducing overmuch the complexity involved in the study of these flows. We examined and compared the internal velocities of the flows and their depositional spreads. While the optical performance of the non-intrusive technique was improved, some of the characteristics commonly seen in these types of granular flows were not observed. Velocity profiles obtained in the body of the flows were similar in shape but with differences in velocity magnitude depending on the amount of fines and the angularity of the particle in one case. Depositional runouts between flows were similar at low inclinations when little internal energy was supplemented to the system or when the viscous effects dominated the mechanics at steeper angles.

  8. Unified theory of inertial granular flows and non-Brownian suspensions.

    Science.gov (United States)

    DeGiuli, E; Düring, G; Lerner, E; Wyart, M

    2015-06-01

    Rheological properties of dense flows of hard particles are singular as one approaches the jamming threshold where flow ceases both for aerial granular flows dominated by inertia and for over-damped suspensions. Concomitantly, the length scale characterizing velocity correlations appears to diverge at jamming. Here we introduce a theoretical framework that proposes a tentative, but potentially complete, scaling description of stationary flows. Our analysis, which focuses on frictionless particles, applies both to suspensions and inertial flows of hard particles. We compare our predictions with the empirical literature, as well as with novel numerical data. Overall, we find a very good agreement between theory and observations, except for frictional inertial flows whose scaling properties clearly differ from frictionless systems. For overdamped flows, more observations are needed to decide if friction is a relevant perturbation. Our analysis makes several new predictions on microscopic dynamical quantities that should be accessible experimentally.

  9. On the Flow and Fluidization of Granular Materials: Applications to Large Lunar Craters, Cliff Collapses and Asteroid Shapes

    Science.gov (United States)

    Holsapple, K. A.

    2011-03-01

    About flows of granular materials and assumptions about fluidization mechanisms to explain large flat craters and landslide run outs. No such mechanisms are needed, the reasons and examples are given.

  10. Slow axial drift in three-dimensional granular tumbler flow

    Science.gov (United States)

    Zaman, Zafir; D'Ortona, Umberto; Umbanhowar, Paul B.; Ottino, Julio M.; Lueptow, Richard M.

    2013-07-01

    Models of monodisperse particle flow in partially filled three-dimensional tumblers often assume that flow along the axis of rotation is negligible. We test this assumption, for spherical and double cone tumblers, using experiments and discrete element method simulations. Cross sections through the particle bed of a spherical tumbler show that, after a few rotations, a colored band of particles initially perpendicular to the axis of rotation deforms: particles near the surface drift toward the pole, while particles deeper in the flowing layer drift toward the equator. Tracking of mm-sized surface particles in tumblers with diameters of 8-14 cm shows particle axial displacements of one to two particle diameters, corresponding to axial drift that is 1-3% of the tumbler diameter, per pass through the flowing layer. The surface axial drift in both double cone and spherical tumblers is zero at the equator, increases moving away from the equator, and then decreases near the poles. Comparing results for the two tumbler geometries shows that wall slope causes axial drift, while drift speed increases with equatorial diameter. The dependence of axial drift on axial position for each tumbler geometry is similar when both are normalized by their respective maximum values.

  11. Dynamics of granular flows down rotating semi-cylindrical chutes

    NARCIS (Netherlands)

    Shirsath, S.S.; Padding, J.T.; Clercx, H.J.H.; Kuipers, J.A.M.; Han, Yongshen; Ge, Wei; Wang, Junwu; Wang, Limin; Liu, Xinhua

    2015-01-01

    The behavior of spherical particles flowing down a three-dimensional chute, inclined at fixed angle, is commonly simulated by a discrete element method (DEM). DEM is nowadays a standard tool for numerical studies of e.g. gas-solid fluidized beds. We have modified DEM for the simulation of rotating g

  12. Stability analysis of unbounded uniform dense granular shear flow based on a viscoplastic constitutive law

    Science.gov (United States)

    Chen, Wen-Yau; Lai, Jeng-You; Young, D. L.

    2010-11-01

    Asymptotic and transient stability analyses of unbounded uniform granular shear flow at high solids volume fractions were carried out in the paper, based on a model composed of the viscoplastic constitutive law [P. Jop, Y. Forterre, and O. Pouliquen, Nature (London) 441, 727 (2006)] and the dilatancy law [O. Pouliquen et al., J. Stat. Mech.: Theory Exp. (2006) P07020]. We refer to this model as the VPDL (meaning of the "viscoplastic and dilatancy laws") thereinafter. In this model, dense granular flows were treated as a viscoplastic fluid with a Drucker-Prager-like yielding criterion. We compared our results to those obtained using the frictional-kinetic model (FKM) [M. Alam and P. R. Nott, J. Fluid Mech. 343, 267 (1997)]. Our main result is that unbounded uniform dense granular shear flows are always asymptotically stable at large time based on the VPDL model, at least for two-dimensional perturbations. This is valid for disturbances of layering modes (i.e., the perturbations whose wavenumber vectors are aligned along the transverse coordinate) as well as for nonlayering modes (the streamwise component of the wavenumber vector is nonzero). By contrast, layering modes can be unstable based on the FKM constitutive laws. Interestingly, in the framework of the VPDL, the analysis shows that significant transient growth may occur owing to the non-normality of the linear system, although disturbances eventually decay at large time.

  13. Granular and particle-laden flows: from laboratory experiments to field observations

    Science.gov (United States)

    Delannay, R.; Valance, A.; Mangeney, A.; Roche, O.; Richard, P.

    2017-02-01

    This review article provides an overview of dry granular flows and particle fluid mixtures, including experimental and numerical modeling at the laboratory scale, large scale hydrodynamics approaches and field observations. Over the past ten years, the theoretical and numerical approaches have made such significant progress that they are capable of providing qualitative and quantitative estimates of particle concentration and particle velocity profiles in steady and fully developed particulate flows. The next step which is currently developed is the extension of these approaches to unsteady and inhomogeneous flow configurations relevant to most of geophysical flows. We also emphasize that the up-scaling from laboratory experiments to large scale geophysical flows still poses some theoretical physical challenges. For example, the reduction of the dissipation that is responsible for the unexpected long run-out of large scale granular avalanches is not observed at the laboratory scale and its physical origin is still a matter of debate. However, we believe that the theoretical approaches have reached a mature state and that it is now reasonable to tackle complex particulate flows that incorporate more and more degrees of complexity of natural flows.

  14. A finite area scheme for shallow granular flows on three-dimensional surfaces

    Science.gov (United States)

    Rauter, Matthias

    2017-04-01

    Shallow granular flow models have become a popular tool for the estimation of natural hazards, such as landslides, debris flows and avalanches. The shallowness of the flow allows to reduce the three-dimensional governing equations to a quasi two-dimensional system. Three-dimensional flow fields are replaced by their depth-integrated two-dimensional counterparts, which yields a robust and fast method [1]. A solution for a simple shallow granular flow model, based on the so-called finite area method [3] is presented. The finite area method is an adaption of the finite volume method [4] to two-dimensional curved surfaces in three-dimensional space. This method handles the three dimensional basal topography in a simple way, making the model suitable for arbitrary (but mildly curved) topography, such as natural terrain. Furthermore, the implementation into the open source software OpenFOAM [4] is shown. OpenFOAM is a popular computational fluid dynamics application, designed so that the top-level code mimics the mathematical governing equations. This makes the code easy to read and extendable to more sophisticated models. Finally, some hints on how to get started with the code and how to extend the basic model will be given. I gratefully acknowledge the financial support by the OEAW project "beyond dense flow avalanches". Savage, S. B. & Hutter, K. 1989 The motion of a finite mass of granular material down a rough incline. Journal of Fluid Mechanics 199, 177-215. Ferziger, J. & Peric, M. 2002 Computational methods for fluid dynamics, 3rd edn. Springer. Tukovic, Z. & Jasak, H. 2012 A moving mesh finite volume interface tracking method for surface tension dominated interfacial fluid flow. Computers & fluids 55, 70-84. Weller, H. G., Tabor, G., Jasak, H. & Fureby, C. 1998 A tensorial approach to computational continuum mechanics using object-oriented techniques. Computers in physics 12(6), 620-631.

  15. Modeling granular material flows: The angle of repose, fluidization and the cliff collapse problem

    Science.gov (United States)

    Holsapple, Keith A.

    2013-07-01

    I discuss theories of granular material flows, with application to granular flows on the earth and planets. There are two goals. First, there is a lingering belief of some that the standard continuum plasticity Mohr-Coulomb and/or Drucker-Prager models are not adequate for many large-scale granular flow problems. The stated reason for those beliefs is the fact that the final slopes of the run-outs in collapse, landslide problems, and large-scale cratering are well below the angle of repose of the material. That observation, combined with the supposition that in those models flow cannot occur with slopes less than the angle of repose, has led to a number of researchers suggesting a need for lubrication or fluidization mechanisms and modeling. That issue is investigated in detail and shown to be false. A complete analysis of slope failures according to the Mohr-Coulomb model is presented, with special attention to the relations between the angle of repose and slope failures. It is shown that slope failure can occur for slope angles both larger than and smaller than the angle of repose. Second, to study the details of landslide run-outs, finite-difference continuum code simulations of the prototypical cliff collapse problem, using the classical plasticity models, are presented, analyzed and compared to experiments. Although devoid of any additional fluidization models, those simulations match experiments in the literature extremely well. The dynamics of this problem introduces additional important features relating to the run-out and final slope angles. The vertical free surface begins to fall at the initial 90° and flow continues to a final slope less than 10°. The detail in the calculation is examined to show why flow persists at slope angles that appear to be less than the angle of repose. The motions include regions of solid-like, fluid-like, and gas-like flows without invoking any additional models.

  16. How large grains increase bulk friction in bi-disperse granular chute flows

    Science.gov (United States)

    Staron, Lydie; Phillips, Jeremy C.

    2016-07-01

    In this contribution, we apply contact dynamics discrete simulations to explore how the mechanical properties of simple bi-dimensional granular chute flows are affected by the existence of two grain sizes. Computing partial stress tensors for the phases of small and large grains, we show that the phase of large grain exhibits a much larger shear strength than the phase of small grains. This difference translates in terms of the flow internal friction: adopting the μ (I) dependence to describe the flow frictional properties, we establish that the flow mean friction coefficient increases with the volume fraction of large grains. Hence, while the presence of large grains may induce lubrication in 3D unconfined flows due to the self-channelisation and levées formation, the effect of large grains on the bulk properties is to decrease the flow mobility.

  17. Erosion and deposition in depth-averaged models of dense, dry, inclined, granular flows

    Science.gov (United States)

    Jenkins, James T.; Berzi, Diego

    2016-11-01

    We derive expressions for the rates of erosion and deposition at the interface between a dense, dry, inclined granular flow and an erodible bed. In obtaining these, we assume that the interface between the flowing grains and the bed moves with the speed of a pressure wave in the flow, for deposition, or with the speed of a disturbance through the contacting particles in the bed, for erosion. We employ the expressions for the rates of erosion and deposition to show that after an abrupt change in the angle of inclination of the bed the characteristic time for the motion of the interface is much shorter than the characteristic time of the flow. This eliminates the need for introducing models of erosion and deposition rate in the mass balance; and the instantaneous value of the particle flux is the same function of the instantaneous value of the flow depth as in a steady, uniform flow.

  18. Rapid small-scale column testing of granular activated carbon for organic micro-pollutant removal in treated domestic wastewater.

    Science.gov (United States)

    Zietzschmann, F; Müller, J; Sperlich, A; Ruhl, A S; Meinel, F; Altmann, J; Jekel, M

    2014-01-01

    This study investigates the applicability of the rapid small-scale column test (RSSCT) concept for testing of granular activated carbon (GAC) for organic micro-pollutants (OMPs) removal from wastewater treatment plant (WWTP) effluent. The chosen experimental setup was checked using pure water, WWTP effluent, different GAC products, and variable hydrodynamic conditions with different flow velocities and differently sized GAC, as well as different empty bed contact times (EBCTs). The setup results in satisfying reproducibility and robustness. RSSCTs in combination with WWTP effluent are effective when comparing the OMP removal potentials of different GAC products and are a useful tool for the estimation of larger filters. Due to the potentially high competition between OMPs and bulk organics, breakthrough curves are likely to have unfavorable shapes when treating WWTP effluent. This effect can be counteracted by extending the EBCT. With respect to the strong competition observed in GAC treatment of WWTP effluent, the small organic acid and neutral substances are retained longer in the RSSCT filters and are likely to cause the majority of the observed adsorption competition with OMPs.

  19. Flow of wet granular materials: A numerical study

    Science.gov (United States)

    Khamseh, Saeed; Roux, Jean-Noël; Chevoir, François

    2015-08-01

    We simulate dense assemblies of frictional spherical grains in steady shear flow under controlled normal stress P in the presence of a small amount of an interstitial liquid, which gives rise to capillary menisci, assumed isolated (pendular regime), and attractive forces, which are hysteretic: Menisci form at contact, but do not break until grains are separated by a finite rupture distance. The system behavior depends on two dimensionless control parameters, inertial number I and reduced pressure P*=a P /(π Γ ) , comparing confining forces ˜a2P to meniscus tensile strength F0=π Γ a , for grains of diameter a joined by menisci with surface tension Γ . We pay special attention to the quasistatic limit of slow flow and observe systematic, enduring strain localization in some of the cohesion-dominated (P*˜0.1 ) systems. Homogeneous steady flows are characterized by the dependence of internal friction coefficient μ* and solid fraction Φ on I and P*. We also record normal stress differences, fairly small but not negligible and increasing for decreasing P*. The system rheology is moderately sensitive to saturation within the pendular regime, but would be different in the absence of capillary hysteresis. Capillary forces have a significant effect on the macroscopic behavior of the system, up to P* values of several units, especially for longer force ranges associated with larger menisci. The concept of effective pressure may be used to predict an order of magnitude for the strong increase of μ* as P* decreases but such a crude approach is unable to account for the complex structural changes induced by capillary cohesion, with a significant decrease of Φ and different agglomeration states and anisotropic fabric. Likewise, the Mohr-Coulomb criterion for pressure-dependent critical states is, at best, an approximation valid within a restricted range of pressures, with P*≥1 . At small enough P*, large clusters of interacting grains form in slow flows, in which

  20. Creepy landscapes : river sediment entrainment develops granular flow rheology on creeping bed.

    Science.gov (United States)

    Prancevic, J.; Chatanantavet, P.; Ortiz, C. P.; Houssais, M.; Durian, D. J.; Jerolmack, D. J.

    2015-12-01

    To predict rates of river sediment transport, one must first address the zeroth-order question: when does sediment move? The concept and determination of the critical fluid shear stress remains hazy, as observing particle motion and determining sediment flux becomes increasingly hard in its vicinity. To tackle this problem, we designed a novel annular flume experiment - reproducing an infinite river channel - where the refractive index of particles and the fluid are matched. The fluid is dyed with a fluorescent powder and a green laser sheet illuminates the fluid only, allowing us to observe particle displacements in a vertical plane. Experiments are designed to highlight the basic granular interactions of sediment transport while suppressing the complicating effects of turbulence; accordingly, particles are uniform spheres and Reynolds numbers are of order 1. We have performed sediment transport measurements close to the onset of particle motion, at steady state, and over long enough time to record averaged rheological behavior of particles. We find that particles entrained by a fluid exhibit successively from top to bottom: a suspension regime, a dense granular flow regime, and - instead of a static bed - a creeping regime. Data from experiments at a range of fluid stresses can be collapsed onto one universal rheologic curve that indicates the effective friction is a monotonic function of a dimensionless number called the viscous number. These data are in remarkable agreement with the local rheology model proposed by Boyer et al., which means that dense granular flows, suspensions and bed-load transport are unified under a common frictional flow law. Importantly, we observe slow creeping of the granular bed even in the absence of bed load, at fluid stresses that are below the apparent critical value. This last observation challenges the classical definition of the onset of sediment transport, and points to a continuous transition from quasi-static deformation to

  1. DEM study of granular flow around blocks attached to inclined walls

    Science.gov (United States)

    Samsu, Joel; Zhou, Zongyan; Pinson, David; Chew, Sheng

    2017-06-01

    Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM) is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i) flow analysis in terms of flow patterns and particle velocities, (ii) force distributions within the model geometry, and (iii) wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  2. The Effect Liquid Loading on the Rheology of Granular Flows

    Science.gov (United States)

    Sundaresan, Sankaran; Ozel, Ali; Gu, Yile; Radl, Stefan; Sundar's Group Team; Cfdem Collaboration

    2015-03-01

    Discrete element simulations of simple shear flows of dense and homogeneous assemblies of uniform, spherical, soft and dry particles reveal three regimes: (i) a quasi-static regime, where the stress is independent of shear rate, (ii) an inertial regime where the stress varies quadratically with shear rate and (iii) an intermediate regime where the stress manifests power-law dependence with n 1/2. Inclusion of inter-particle cohesion due to van der Waals force has been shown to lead to bifurcation of the inertial regime into two regimes: (a) a cohesive rate-independent regime and (b) an inertial regime. In the present study, we perform analogous simulations for wet particles. We account for capillary and viscous interaction forces between particles, which result from the liquid bridges, and allow for liquid transfer between the particles and the liquid bridge. It is found that the bifurcation of the inertial regime observed with van der Waals interaction persists for capillary cohesion and that the span of the cohesive rate-independent regime increases with liquid loading in the pendular regime. A simple model for steady shear rheology is obtained by blending the results in various regimes. The presentation will also discuss the effect liquid viscosity on the flow behavior.

  3. Granular Flow and Dynamics of Lunar Simulants in Excavating Implements

    Science.gov (United States)

    Agui, Juan H.; Wilkinson, R. Allen

    2010-01-01

    The exploration of the lunar surface will rely on properly designed excavation equipment for surface preparations and for collection of lunar regolith in In-Situ Resource Utilization (ISRU) processes. Performance efficiency, i.e minimizing loading forces while maximizing material collection, and mass and volume reductions are major design goals. The NASA Glenn Research Center has embarked on an experimental program to determine the flow characteristics and dynamic forces produced by excavation operations using various excavator bucket designs. A new large scale soil bin facility, 2.27 m x 5.94 m x 0.76 m (nominally 8 ft. x 20 ft. x 27 in.) in size, capable of accommodating moderately large test implements was used for the simulations of lunar operations. The soil bin is filled with GRC-3simulant (a mixture of industrial sands and silt with a particle size distribution and the bulk mechanical (shear) strength representative of an average of lunar regolith from different regions) and uses motorized horizontal rails and a vertical actuator to drive the implement through the lunar simulant soil. A six-axis load cell and encoders provide well resolved measurements of the three dimensional forces and torques and motion of the bucket. In addition, simultaneous video allows for the analysis of the flow behavior and structure formation of the regolith during excavation. The data may be useful in anchoring soil mechanic models and to provide engineering data for design consideration.

  4. Mass flow rate of granular material in silos with lateral exit holes

    Science.gov (United States)

    Medina, Abraham; Serrano, Armando; Sanchez, Florencio

    2014-11-01

    In this work we have analyzed experimentally the mass flow rate, m', of the lateral outflow of cohesionless granular material through circular orifices of diameter D and rectangular and triangular slots of hydraulic diameter DH made in vertical walls of bins. Experiments were made in order to determine also the influence of the wall thickness of the bin, w. Geometrical and physical arguments, are given to get a general correlation for m' embracing both quantities, D (DH) and w. The angle of repose is also an important factor characterizing these flows.

  5. Shear localization and effective wall friction in a wall bounded granular flow

    Directory of Open Access Journals (Sweden)

    Artoni Riccardo

    2017-01-01

    Full Text Available In this work, granular flow rheology is investigated by means of discrete numerical simulations of a torsional, cylindrical shear cell. Firstly, we focus on azimuthal velocity profiles and study the effect of (i the confining pressure, (ii the particle-wall friction coefficient, (iii the rotating velocity of the bottom wall and (iv the cell diameter. For small cell diameters, azimuthal velocity profiles are nearly auto-similar, i.e. they are almost linear with the radial coordinate. Different strain localization regimes are observed : shear can be localized at the bottom, at the top of the shear cell, or it can be even quite distributed. This behavior originates from the competition between dissipation at the sidewalls and dissipation in the bulk of the system. Then we study the effective friction at the cylindrical wall, and point out the strong link between wall friction, slip and fluctuations of forces and velocities. Even if the system is globally below the sliding threshold, force fluctuations trigger slip events, leading to a nonzero wall slip velocity and an effective wall friction coefficient different from the particle-wall one. A scaling law was found linking slip velocity, granular temperature in the main flow direction and effective friction. Our results suggest that fluctuations are an important ingredient for theories aiming to capture the interface rheology of granular materials.

  6. Three-dimensional particle tracking velocimetry applied to granular flows down rotating chutes

    Science.gov (United States)

    Clercx, Herman; Shirsath, Sushil; Padding, Johan; Kuipers, Hans

    2014-11-01

    We report on the cross-validation of 3D particle tracking velocimetry (3D-PTV) with other measurement techniques, such as particle image velocimetry (PIV), electronic ultrasonic sensor measurements for bed height and the discrete element model (DEM), for gaining more insight into the behavior of granular flows down inclined rotating chutes. In particular we aim at gaining access to Lagrangian displacement data of surface particles in granular flows and to obtain independent measurements of both the surface velocity and the bed height in the chute. The 3D-PTV method is based on imaging and tracking colored tracer particles that are introduced in the granular material, which are viewed from three directions. The three cameras collect consecutive frames a known Δt apart and the PTV algorithm for locating and tracking particles is used to determine particle trajectories and velocities. The PTV and PIV results are in good mutual agreement with regard to the streamwise and spanwise surface velocity. The particle bed height obtained from 3D-PTV was compared with data from an ultrasonic bed-height sensor and it is found to be in good mutual agreement, as was the case for the comparison between the experimental findings from 3D-PTV and simulations by DEM.

  7. Water flow exchange characteristics in coarse granular filter media

    DEFF Research Database (Denmark)

    Andreasen, Rune Røjgaard; Pugliese, Lorenzo; Poulsen, Tjalfe

    2013-01-01

    in this study are performed at a concurrent airflow of 0.3 m s−1, water irrigation rates of 1–21 cm h−1 in materials with particle diameters ranging from 2 to 14 mm to represent media and operation conditions relevant for low flow biotrickling filter design. Specific surface area related elution velocity...... distribution was closely related to the filter water content, water irrigation rate, media specific surface area and particle size distribution. A predictive model linking the specific surface area related elution velocity distribution to irrigation rate, specific surface area and particle size distribution......Elution of inhibitory metabolites is a key parameter controlling the efficiency of air cleaning bio- and biotrickling filters. To the authors knowledge no studies have yet considered the relationship between specific surface area related elution velocity and physical media characteristics, which...

  8. Water flow exchange characteristics in coarse granular filter media

    DEFF Research Database (Denmark)

    Andreasen, Rune Røjgaard; Pugliese, Lorenzo; Poulsen, Tjalfe

    2013-01-01

    Elution of inhibitory metabolites is a key parameter controlling the efficiency of air cleaning bio- and biotrickling filters. To the authors knowledge no studies have yet considered the relationship between specific surface area related elution velocity and physical media characteristics, which...... in this study are performed at a concurrent airflow of 0.3 m s−1, water irrigation rates of 1–21 cm h−1 in materials with particle diameters ranging from 2 to 14 mm to represent media and operation conditions relevant for low flow biotrickling filter design. Specific surface area related elution velocity...... distribution was closely related to the filter water content, water irrigation rate, media specific surface area and particle size distribution. A predictive model linking the specific surface area related elution velocity distribution to irrigation rate, specific surface area and particle size distribution...

  9. Nonlinear theory of nonstationary low Mach number channel flows of freely cooling nearly elastic granular gases.

    Science.gov (United States)

    Meerson, Baruch; Fouxon, Itzhak; Vilenkin, Arkady

    2008-02-01

    We employ hydrodynamic equations to investigate nonstationary channel flows of freely cooling dilute gases of hard and smooth spheres with nearly elastic particle collisions. This work focuses on the regime where the sound travel time through the channel is much shorter than the characteristic cooling time of the gas. As a result, the gas pressure rapidly becomes almost homogeneous, while the typical Mach number of the flow drops well below unity. Eliminating the acoustic modes and employing Lagrangian coordinates, we reduce the hydrodynamic equations to a single nonlinear and nonlocal equation of a reaction-diffusion type. This equation describes a broad class of channel flows and, in particular, can follow the development of the clustering instability from a weakly perturbed homogeneous cooling state to strongly nonlinear states. If the heat diffusion is neglected, the reduced equation becomes exactly soluble, and the solution develops a finite-time density blowup. The blowup has the same local features at singularity as those exhibited by the recently found family of exact solutions of the full set of ideal hydrodynamic equations [I. Fouxon, Phys. Rev. E 75, 050301(R) (2007); I. Fouxon,Phys. Fluids 19, 093303 (2007)]. The heat diffusion, however, always becomes important near the attempted singularity. It arrests the density blowup and brings about previously unknown inhomogeneous cooling states (ICSs) of the gas, where the pressure continues to decay with time, while the density profile becomes time-independent. The ICSs represent exact solutions of the full set of granular hydrodynamic equations. Both the density profile of an ICS and the characteristic relaxation time toward it are determined by a single dimensionless parameter L that describes the relative role of the inelastic energy loss and heat diffusion. At L>1 the intermediate cooling dynamics proceeds as a competition between "holes": low-density regions of the gas. This competition resembles Ostwald

  10. Flow-induced agitations create a granular fluid: Effective viscosity and fluctuations

    Science.gov (United States)

    Nichol, Kiri; van Hecke, Martin

    2012-06-01

    We fluidize a granular medium with localized stirring in a split-bottom shear cell. We probe the mechanical response of quiescent regions far from the main flow by observing the vertical motion of cylindrical probes rising, sinking, and floating in the grains. First, we find that the probe motion suggests that the granular material behaves in a liquid-like manner: high-density probes sink and low-density probes float at the depth given by Archimedes’ law. Second, we observe that the drag force on moving probes scales linearly with their velocity, which allows us to define an effective viscosity for the system. This effective viscosity is inversely proportional to the rotation rate of the disk which drives the split bottom flow. Moreover, the apparent viscosity depends on radius and mass of the probe: despite the linear dependence of the drag forces on sinking speed of the probe, the granular medium is not simply Newtonian, but exhibits a more complex rheology. The decrease of viscosity with filling height of the cell, combined with the poor correlation between local strain rate and viscosity, suggests that the fluid-like character of the material is set by agitations generated in the stirred region: the relation between applied stress and observed strain rate in one location depends on the strain rate in another location. We probe the nature of the granular fluctuations that we believe mediates these nonlocal interactions by characterizing the small and random up and down motion that the probe experiences. These Gaussian fluctuations exhibit a mix of diffusive and subdiffusive behavior at short times and saturate at a value of roughly 1/10th of a grain diameter longer times, consistent with the picture of a random walker in a potential well. The product of crossover time and effective viscosity is constant, evidencing a direct link between fluctuations and viscosity.

  11. Lubrication forces in dense granular flow with interstitial fluid: A simulation study with Discrete Element Method

    Science.gov (United States)

    Baran, Oleh; Ertas, Deniz; Halsey, Thomas; Zhou, Fuping

    2007-03-01

    Using three-dimensional molecular dynamics simulations, we study steady gravity-driven flows of frictional inelastic spheres of diameter d and density ρg down an incline, interacting through two-body lubrication forces in addition to granular contact forces. Scaling arguments suggest that, in 3D, these forces constitute the dominant perturbation of an interstitial fluid for small Reynolds number Re and low fluid densityρ. Two important parameters that characterize the strength of the lubrication forces are fluid viscosity and grain roughness. We observe that incline flows with lubrication forces exhibit a packing density that decreases with increasing distance from the surface. As the incline angle is increased, this results in a severely dilated basal layer that looks like ``hydroplaning'' similar to that observed in geological subaqueous debris flows. This is surprising since the model explicitly disallows any buildup of fluid pressure in the base of the flow, and suggests that hydroplaning might have other contributing factors besides this traditional explanation. The local packing density is still determined by the dimensionless strain rate I≡γ1ptd√ρg/p , where p is the average normal stress, obeying a ``dilatancy law'' similar to dry granular flows.

  12. Analysis of the Tangjiaxi landslide-generated waves in the Zhexi Reservoir, China, by a granular flow coupling model

    Science.gov (United States)

    Huang, Bolin; Yin, Yueping; Wang, Shichang; Tan, Jianmin; Liu, Guangning

    2017-05-01

    A rocky granular flow is commonly formed after the failure of rocky bank slopes. An impulse wave disaster may also be initiated if the rocky granular flow rushes into a river with a high velocity. Currently, the granular mass-water body coupling study is an important trend in the field of landslide-induced impulse waves. In this paper, a full coupling numerical model for landslide-induced impulse waves is developed based on a non-coherent granular flow equation, i.e., the Mih equation. In this model, the Mih equation for continuous non-coherent granular flow controls movements of sliding mass, the two-phase flow equation regulates the interaction between sliding mass and water, and the renormalization group (RNG) turbulence model governs the movement of the water body. The proposed model is validated and applied for the 2014 Tangjiaxi landslide of the Zhexi Reservoir located in Hunan Province, China, to analyze the characteristics of both landslide motion and its following impulse waves. On 16 July 2014, a rocky debris flow was formed after the failure of the Tangjiaxi landslide, damming the Tangjiaxi stream and causing an impulse wave disaster with three dead and nine missing bodies. Based on the full coupling numerical analysis, the granular flow impacts the water with a maximum velocity of about 22.5 m s-1. Moreover, the propagation velocity of the generated waves reaches up to 12 m s-1. The maximum calculated run-up of 21.8 m is close enough to the real value of 22.7 m. The predicted landslide final deposit and wave run-up heights are in a good agreement with the field survey data. These facts verify the ability of the proposed model for simulating the real impulse wave generated by rocky granular flow events.

  13. Formation and mechanics of granular waves in gravity and shallow overland flow

    Science.gov (United States)

    Römkens, Mathias J. M.; Suryadevara, Madhu R.; Prasad, Shyam N.

    2010-05-01

    Sediment transport in overland flow is a highly complex process involving many properties relative to the flow regime characteristics, soil surface conditions, and type of sediment. From a practical standpoint, most sediment transport studies are concerned with developing relationships of rates of sediment movement under different hydraulic regimes in channel flow for use in soil erosion and sediment transport prediction models. Relatively few studies have focused on the more basic aspects of sediment movement in which particle-to-particle, particle-to-boundary, and particle-to-fluid interactions determine in an important way the nature of the movement. Our experimental work under highly controlled experimental conditions with both gravity flow of granular material (glass beads) in air and sediment transport (sand particles and glass beads) in shallow overland flow have shown that sediment movement is not a simple phenomenon solely determined by flow rates on a proportional basis, but that it is represented by a highly structured and organized regime determined by sedimentary fluid mechanical principles which yield very characteristic waves during transport. In the gravity flow case involving granular chute flow, two-dimensional grain waves developed into the rolling and saltating moving grain mass at certain grain concentrations. This phenomenon appeared to be related to an energy exchange process as a result of collisions between moving grain particles that led to reduced kinetic velocities. As a result, particle concentration differences in the direction of flow developed that were noted as denser zones. In these zones, particles dropped out at the upstream part of these denser zones to resume their accelerating motion once they reached the downstream part of the zone until, during the next collision event, the process is repeated. Thus a periodic granular wave structure evolved. Depending on the addition rate, the granular flow regime may be a fluidized

  14. Particle Size Reduction in Geophysical Granular Flows: The Role of Rock Fragmentation

    Science.gov (United States)

    Bianchi, G.; Sklar, L. S.

    2016-12-01

    Particle size reduction in geophysical granular flows is caused by abrasion and fragmentation, and can affect transport dynamics by altering the particle size distribution. While the Sternberg equation is commonly used to predict the mean abrasion rate in the fluvial environment, and can also be applied to geophysical granular flows, predicting the evolution of the particle size distribution requires a better understanding the controls on the rate of fragmentation and the size distribution of resulting particle fragments. To address this knowledge gap we are using single-particle free-fall experiments to test for the influence of particle size, impact velocity, and rock properties on fragmentation and abrasion rates. Rock types tested include granodiorite, basalt, and serpentinite. Initial particle masses and drop heights range from 20 to 1000 grams and 0.1 to 3.0 meters respectively. Preliminary results of free-fall experiments suggest that the probability of fragmentation varies as a power function of kinetic energy on impact. The resulting size distributions of rock fragments can be collapsed by normalizing by initial particle mass, and can be fit with a generalized Pareto distribution. We apply the free-fall results to understand the evolution of granodiorite particle-size distributions in granular flow experiments using rotating drums ranging in diameter from 0.2 to 4.0 meters. In the drums, we find that the rates of silt production by abrasion and gravel production by fragmentation scale with drum size. To compare these rates with free-fall results we estimate the particle impact frequency and velocity. We then use population balance equations to model the evolution of particle size distributions due to the combined effects of abrasion and fragmentation. Finally, we use the free-fall and drum experimental results to model particle size evolution in Inyo Creek, a steep, debris-flow dominated catchment, and compare model results to field measurements.

  15. Continuum modeling of segregation for tridisperse granular materials in developing chute flow

    Science.gov (United States)

    Deng, Zhekai; Umbanhowar, Paul; Lueptow, Richard

    2015-11-01

    Predicting segregation and mixing of size polydisperse granular material is a challenging problem and is relevant to many industrial applications. We develop and implement a continuum-based theoretical model that captures the effects of segregation, diffusion and advection on size tridisperse granular flow in developing quasi-two-dimensional chute flow. Unlike segregation models that rely on arbitrary fitting parameters, our model uses parameters based on kinematics measured using discrete element method (DEM) simulations. The model depends on both the Péclet number, Pe, which we defined as the ratio of the segregation rate to the diffusion rate, and the relative segregation strength between particle species. At large Pe, segregation dominates and chute flow consists of distinct stratified regions of small(bottom), medium(center) and large (top) particles, whereas at small Pe, diffusion dominates, which results in a well mixed flow. As relative segregation strength between any two particle species is increased, the segregation between them becomes quicker. However, as relative segregation strength between them is decreased, they remain mixed with each other. Preliminary results from DEM simulations support our theoretical model.

  16. Flow Transformation in Pyroclastic Density Currents: Entrainment and Granular Dynamics during the 2006 eruption of Tungurahua

    Science.gov (United States)

    Dufek, J.; Benage, M. C.; Geist, D.; Harpp, K. S.

    2013-12-01

    Pyroclastic density currents are ground hugging flows composed of hot gases, fragments of juvenile magmatic material, and entrained clasts from the conduit or the edifice over which the flows have traveled. The interior of these flows are opaque to observation due to their large ash content, but recent investigations have highlighted that there are likely strong gradients in particle concentration and segregation of particle sizes in these particle-laden gravity currents. Pyroclastic density currents refer to a broad range of phenomena from dense flows in which the dynamics are dominated by frictional interaction between particles (dense granular flows), to gas fluidized flows, to dilute flows dominated by particle-gas turbulent interaction. However, abrupt flow transformation (e.g. from dense to dilute pyroclastic density currents) can arise due to energy exchange across multiple length scales and phases, and understanding these flow transformations is important in delineating the entrainment and erosion history of these flows, interpretations of their deposits, and in better understanding the hazards they present. During the 2006 eruption of Tungurahua, Ecuador numerous, dense pyroclastic density currents descended the volcano as result of boiling-over or low column collapse eruptions. The deposits of these flows typically have pronounced snouts and levees, and are often dominated by large, clasts (meter scale in some locations). There is an exceptional observational record of these flows and their deposits, permitting detailed field constraints of their dynamics. A particularly interesting set of flows occurred on Aug. 17, 2006 during the paroxysmal phase of the eruption that descended the slope of the volcano, filled in the river channel of the Chambo river, removing much of the larger clasts from the flow, and resulting in a dilute ';surge' that transported finer material across the channel and uphill forming dune features on the opposite bank of the river. We

  17. 2D transient granular flows over obstacles: experimental and numerical work

    Science.gov (United States)

    Juez, Carmelo; Caviedes-Voullième, Daniel; Murillo, Javier; García-Navarro, Pilar

    2016-04-01

    Landslides are an ubiquitous natural hazard, and therefore human infrastructure and settlements are often at risk in mountainous regions. In order to better understand and predict landslides, systematic studies of the phenomena need to be undertaken. In particular, computational tools which allow for analysis of field problems require to be thoroughly tested, calibrated and validated under controlled conditions. And to do so, it is necessary for such controlled experiments to be fully characterized in the same terms as the numerical model requires. This work presents an experimental study of dry granular flow over a rough bed with topography which resembles a mountain valley. It has an upper region with a very high slope. The geometry of the bed describes a fourth order polynomial curve, with a low point with zero slope, and afterwards a short region with adverse slope. Obstacles are present in the lower regions which are used as model geometries of human structures. The experiments consisted of a sudden release a mass of sand on the upper region, and allowing it to flow downslope. Furthermore, it has been frequent in previous studies to measure final states of the granular mass at rest, but seldom has transient data being provided, and never for the entire field. In this work we present transient measurements of the moving granular surfaces, obtained with a consumer-grade RGB-D sensor. The sensor, developed for the videogame industry, allows to measure the moving surface of the sand, thus obtaining elevation fields. The experimental results are very consistent and repeatable. The measured surfaces clearly show the distinctive features of the granular flow around the obstacles and allow to qualitatively describe the different flow patterns. More importantly, the quantitative description of the granular surface allows for benchmarking and calibration of predictive numerical models, key in scaling the small-scale experimental knowledge into the field. In addition, as

  18. The effect of inter-particle contact time in granular flows -- A network theory

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, D.Z.; Rauenzahn, R.M.

    1996-12-31

    In a kinetic theory, it is usually assumed that the time duration of particle collision is vanishingly small and only binary collisions are considered. The validity of these assumptions depends on the ratio of collision time to mean free flight time. If this ratio is small, the kinetic theory description is appropriate. In a dense system, however, this ratio is usually large, and the dynamics of the multi-particle interactions have to be considered. For instance, during a collision, the contacting pair usually has a relative tangential velocity that causes a change in the direction of rebound. This implies a dependence of the granular stress on the vorticity of the mean flows field. Due to the inherent energy dissipation in a particle collision, and the consistent rearrangement of particles, there are relaxation times associated with them. In a binary collision, this energy dissipation is represented by coefficient of restitution. In a dense granular system, multi-particle interactions occur frequently. The energy dissipation and system relaxation have to be studied by the consideration of the dynamics in the duration of particle interaction and cannot be represented by a single coefficient of restitution. In this case, the relaxation times must be introduced explicitly. By modification of the network theory for rubber material, a constitutive model for dense granular material is developed based on the dynamics of multi-particle interaction. The finite particle interaction time and system relaxation times are considered.

  19. Discharge of a granular silo as a visco-plastic flow

    Science.gov (United States)

    Staron, L.; Lagrée, P.-Y.; Popinet, S.

    2013-06-01

    Implementing a plastic rheology (using the μ(I)-rheology [5]) in a 2D Navier-Stokes solver, we simulate the continuum counterpart of the granular silo. Doing so, we observe a constant flow rate during the discharge and recover the Beverloo scaling. The results suggest that the constant discharge rate is due to the existence of a friction-dependent yield stress. Discrete simulations are performed using the contact dynamics algorithm. Systematic comparison of the velocity field and the inner deformations shows a good agreement between the two approaches.

  20. Discrete Element Method simulations of standing jumps in granular flows down inclines

    Directory of Open Access Journals (Sweden)

    Méjean Ségolène

    2017-01-01

    Full Text Available This paper describes a numerical set-up which uses Discrete Element Method to produce standing jumps in flows of dry granular materials down a slope in two dimensions. The grain-scale force interactions are modeled by a visco-elastic normal force and an elastic tangential force with a Coulomb threshold. We will show how it is possible to reproduce all the shapes of the jumps observed in a previous laboratory study: diffuse versus steep jumps and compressible versus incompressible jumps. Moreover, we will discuss the additional measurements that can be done thanks to discrete element modelling.

  1. Analysis of granular flow in a pebble-bed nuclear reactor.

    Science.gov (United States)

    Rycroft, Chris H; Grest, Gary S; Landry, James W; Bazant, Martin Z

    2006-08-01

    Pebble-bed nuclear reactor technology, which is currently being revived around the world, raises fundamental questions about dense granular flow in silos. A typical reactor core is composed of graphite fuel pebbles, which drain very slowly in a continuous refueling process. Pebble flow is poorly understood and not easily accessible to experiments, and yet it has a major impact on reactor physics. To address this problem, we perform full-scale, discrete-element simulations in realistic geometries, with up to 440,000 frictional, viscoelastic 6-cm-diam spheres draining in a cylindrical vessel of diameter 3.5m and height 10 m with bottom funnels angled at 30 degrees or 60 degrees. We also simulate a bidisperse core with a dynamic central column of smaller graphite moderator pebbles and show that little mixing occurs down to a 1:2 diameter ratio. We analyze the mean velocity, diffusion and mixing, local ordering and porosity (from Voronoi volumes), the residence-time distribution, and the effects of wall friction and discuss implications for reactor design and the basic physics of granular flow.

  2. Analysis of granular flow in a pebble-bed nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rycroft, C H; Grest, Gary S; Landry, James W; Bazant, Martin Z

    2006-04-17

    Pebble-bed nuclear reactor technology, which is currently being revived around the world, raises fundamental questions about dense granular flow in silos. A typical reactor core is composed of graphite fuel pebbles, which drain very slowly in a continuous refueling process. Pebble flow is poorly understood and not easily accessible to experiments, and yet it has a ma jor impact on reactor physics. To address this problem, we perform full-scale, discrete-element simulations in realistic geometries, with up to 440,000 frictional, viscoelastic 6cm-diameter spheres draining in a cylindrical vessel of diameter 3.5m and height 10m with bottom funnels angled at 30° or 60° . We also simulate a bidisperse core with a dynamic central column of smaller graphite moderator pebbles and show that little mixing occurs down to a 1:2 diameter ratio. We analyze the mean velocity, diffusion and mixing, local ordering and porosity (from Voronoi volumes), the residence-time distribution, and the effects of wall friction and discuss implications for reactor design and the basic physics of granular flow.

  3. Flow of granular matter in a silo with multiple exit orifices: Jamming to mixing

    Science.gov (United States)

    Kamath, Sandesh; Kunte, Amit; Doshi, Pankaj; Orpe, Ashish V.

    2014-12-01

    We investigate the mixing characteristics of dry granular material while draining down a silo with multiple exit orifices. The mixing in the silo, which otherwise consists of noninteracting stagnant and flowing regions, is observed to improve significantly when the flow through specific orifices is stopped intermittently. This momentary stoppage of flow through the orifice is either controlled manually or is chosen by the system itself when the orifice width is small enough to cause spontaneous jamming and unjamming. We observe that the overall mixing behavior shows a systematic dependence on the frequency of closing and opening of specific orifices. In particular, the silo configuration employing random jamming and unjamming of any of the orifices shows early evidence of chaotic mixing. When operated in a multipass mode, the system exhibits a practical and efficient way of mixing particles.

  4. Theoretical and numerical studies of constitutive relations for frictional granular flow

    Energy Technology Data Exchange (ETDEWEB)

    Gray, D.; Stiles, J.M.; Celik, I.

    1991-01-01

    The purpose of this report is to propose a suitable constitutive relationship for the three dimensional frictional flow of a cohesionless granular material and to incorporate at least a qualitatively similar constitutive relationship in the computer program TEACH. TEACH is a hydrodynamic code developed by Dr. A.D. Gosman at Imperial College, London, for the simulation of incompressible two dimensional steady duct flows. Simulations performed for this report assumed that the material was flowing under two dimensional plane strain conditions. The numerical algorithm implemented by TEACH is based upon the control volume finite difference principles developed by Spalding and Patankar (Patankar, 1980). TEACH's program structure facilitates the implementation of a non-Newtonian constitutive relationship of the type proposed below. 32 refs., 38 figs., 2 tabs.

  5. Drying and Heating Modelling of Granular Flow: Application to the Mix-Asphalt Processes

    Directory of Open Access Journals (Sweden)

    L Le Guen

    2011-01-01

    Full Text Available Concrete asphalt is a hydrocarbon material that includes a mix of mineral components along with a bituminous binder. Prior to mixing, its production protocol requires drying and heating the aggregates. Generally performed in a rotary drum, these drying and heating steps within mix asphalt processes have never been studied from a physical perspective. We are thus proposing in the present paper to analyze the drying and heating mechanisms when granular materials and hot gases are involved in a co-current flow. This process step accounts for a large proportion of the overall energy consumed during hot-mix asphalt manufacturing. In the present context, the high energy cost associated with this step has encouraged developing new strategies specifically for the drying process. Applying new asphalt techniques so that an amount of moisture can be preserved in the asphalt concrete appears fundamental to such new strategies. This low-energy asphalt, also referred to as the "warm technique", depends heavily on a relevant prediction of the actual moisture content inside asphalt concrete during the mixing step. The purpose of this paper is to present a physical model dedicated to the evolution in temperature and moisture of granular solids throughout the drying and heating steps carried out inside a rotary drum. An initial experimental campaign to visualize inside a drum at the pilot scale (i.e. 1/3 scale has been carried out in order to describe the granular flow and establish the necessary physical assumptions for the drying and heating model. Energy and mass balance equations are solved by implementing an adequate heat and mass transfer coupling, yielding a 1D model from several parameters that in turn drives the physical modeling steps. Moreover, model results will be analyzed and compared to several measurements performed in an actual asphalt mix plant at the industrial scale (i.e. full scale.

  6. The influence of slope-angle ratio on the dynamics of granular flows: insights from laboratory experiments

    Science.gov (United States)

    Sulpizio, R.; Castioni, D.; Rodriguez-Sedano, L. A.; Sarocchi, D.; Lucchi, F.

    2016-11-01

    Laboratory experiments on granular flows using natural material were carried out in order to investigate the behaviour of granular flows passing over a break in slope. Sensors in the depositional area recorded the flow kinematics, while video footage permitted reconstruction of the deposit formation, which allowed investigation of the deposit shape as a function of the change in slope. We defined the slope-angle ratio as the proportion between slope angle in the depositional area and that of the channel. When the granular flow encounters the break in slope part of the flow front forms a bouncing clast zone due to elastic impact with the expansion box floor. During this process, part of the kinetic energy of the dense granular flow is transferred to elutriating fine ash, which subsequently forms turbulent ash cloud accompanying the granular flow until it comes to rest. Morphometric analysis of the deposits shows that they are all elliptical, with an almost constant minor axis and a variable major axis. The almost constant value of the minor axis relates to the spreading angle of flow at the end of the channel, which resembles the basal friction angle of the material. The variation of the major axis is interpreted to relate to the effect of competing inertial and frictional forces. This effect also reflects the partitioning of centripetal and tangential velocities, which changes as the flow passes over the break in slope. After normalization, morphometric data provided empirical relationships that highlight the dependence of runout from the product of slope-angle ratio and the difference in height between granular material release and deposit. The empirical relationships were tested against the runouts of hot avalanches formed during the 1944 ad eruption at Vesuvius, with differences among actual and calculated values are between 1.7 and 15 %. Velocity measurements of laboratory granular flows record deceleration paths at different breaks in slope. When normalized

  7. Rheology of wet granular materials in shear flow: experiments and discrete simulations

    Directory of Open Access Journals (Sweden)

    Badetti Michel

    2016-01-01

    Full Text Available The behaviour of wet granular media in shear flow is characterized by the dependence of apparent friction μ* and solid fraction ΦS on the reduced pressure P* and the inertia number I. Reduced pressure, P*= σ22a2/F0, compares the applied normal stress σ22 on grains of diameter a to the tensile strength of contact F0 (proportional to the surface tension Γ of the liquid and the beads diameter. A specifically modified rotational rheometer is used to characterize the response of model wet granular material (beads with diameter of submillimetric range to applied shear rate γ under controlled normal stress σ22. Discrete Element Method (DEM simulations in 3D are carried out in parallel and numerical results are compared with experimental ones. As P* is reduced, an increase of the apparent friction coefficient μ*=σ12/σ22, measured in the critical state and in slow flows with inertial effects is observed. While the agreement between experiments and simulations is good for dry materials as well as for wet materials in the quasistatic limit (I→0, some differences appear at finite I, for which some possible origins are discussed.

  8. The Rolling Transition in a Granular Flow along a Rotating Wall

    Directory of Open Access Journals (Sweden)

    Aurélie Le Quiniou

    2011-11-01

    Full Text Available The flow of a dry granular material composed of spherical particles along a rotating boundary has been studied by the discrete element method (DEM. This type of flow is used, among others, as a process to spread particles. The flow consists of several phases. A compression phase along the rotating wall is followed by an elongation of the flow along the same boundary. Eventually, the particles slide or roll independently along the boundary. We show that the main motion of the flow can be characterized by a complex deformation rate of traction/compression and shear. We define numerically an effective friction coefficient of the flow on the scale of the continuum and show a strong decrease of this effective friction beyond a certain critical friction coefficient μ*. We correlate this phenomenon with the apparition of a new transition from a sliding regime to a rolling without sliding regime that we called the rolling transition; this dynamic transition is controlled by the value of the friction coefficient between the particle and the wall. We show that the spherical shape for the particles may represent an optimum for the flow in terms of energetic.

  9. Rheology of simple shear flows of dense granular assemblies in different regimes

    Science.gov (United States)

    Chialvo, Sebastian; Sun, Jin; Sundaresan, Sankaran

    2010-11-01

    Using the discrete element method, simulations of simple shear flow of dense assemblies of frictional particles have been carried out over a range of shear rates and volume fractions in order to characterize the transition from quasistatic or inertial flow to intermediate flow. In agreement with previous results for frictionless spheres [1], the pressure and shear stress in the intermediate regime are found to approach asymptotic power law relations with shear rate; curiously, these asymptotes appear to be common to all intermediate flows regardless of the value of the particle friction coefficient. The scaling relations for stress for the inertial and quasistatic regimes are consistent with a recent extension of kinetic theory to dense inertial flows [2] and a simple model for quasistatic flows [3], respectively. For the case of steady, simple shear flow, the different regimes can be bridged readily: a harmonic weighting function blends the inertial regime to the intermediate asymptote, while a simple additive rule combines the quasistatic and intermediate regimes. [4pt] [1] T. Hatano, et al., J. Phys. Soc. Japan 76, 023001 (2007). [0pt] [2] J. Jenkins, and D. Berzi, Granular Matter 12, 151 (2010). [0pt] [3] J. Sun, and S. Sundaresan, J. Fluid Mech. (under review).

  10. Well-posed continuum equations for granular flow with compressibility and μ(I)-rheology

    Science.gov (United States)

    Schaeffer, D. G.; Shearer, M.; Gray, J. M. N. T.

    2017-01-01

    Continuum modelling of granular flow has been plagued with the issue of ill-posed dynamic equations for a long time. Equations for incompressible, two-dimensional flow based on the Coulomb friction law are ill-posed regardless of the deformation, whereas the rate-dependent μ(I)-rheology is ill-posed when the non-dimensional inertial number I is too high or too low. Here, incorporating ideas from critical-state soil mechanics, we derive conditions for well-posedness of partial differential equations that combine compressibility with I-dependent rheology. When the I-dependence comes from a specific friction coefficient μ(I), our results show that, with compressibility, the equations are well-posed for all deformation rates provided that μ(I) satisfies certain minimal, physically natural, inequalities. PMID:28588402

  11. Well-posed continuum equations for granular flow with compressibility and $\\mu(I)$-rheology

    CERN Document Server

    Barker, T; Shearer, M; Gray, J M N T

    2016-01-01

    Continuum modelling of granular flow has been plagued with the issue of ill-posed equations for a long time. Equations for incompressible, two-dimensional flow based on the Coulomb friction law are ill-posed regardless of the deformation, whereas the rate-dependent $\\mu(I)$-rheology is ill-posed when the non-dimensional strain-rate $I$ is too high or too low. Here, incorporating ideas from Critical-State Soil Mechanics, we derive conditions for well-posedness of PDEs that combine compressibility with $I$-dependent rheology. When the $I$-dependence comes from a specific friction coefficient $\\mu(I)$, our results show that, with compressibility, the equations are well-posed for all deformation rates provided that $\\mu(I)$ satisfies certain minimal, physically natural, inequalities.

  12. Discharge flow of a granular media from a silo: effect of the packing fraction and of the hopper angle

    Science.gov (United States)

    Benyamine, Mebirika; Aussillous, Pascale; Dalloz-Dubrujeaud, Blanche

    2017-06-01

    Silos are widely used in the industry. While empirical predictions of the flow rate, based on scaling laws, have existed for more than a century (Hagen 1852, translated in [1] - Beverloo et al. [2]), recent advances have be made on the understanding of the control parameters of the flow. In particular, using continuous modeling together with a mu(I) granular rheology seem to be successful in predicting the flow rate for large numbers of beads at the aperture (Staron et al.[3], [4]). Moreover Janda et al.[5] have shown that the packing fraction at the outlet plays an important role when the number of beads at the apeture decreases. Based on these considerations, we have studied experimentally the discharge flow of a granular media from a rectangular silo. We have varied two main parameters: the angle of the hopper, and the bulk packing fraction of the granular material by using bidisperse mixtures. We propose a simple physical model to describe the effect of these parameters, considering a continuous granular media with a dilatancy law at the outlet. This model predicts well the dependance of the flow rate on the hopper angle as well as the dependance of the flow rate on the fine mass fraction of a bidisperse mixture.

  13. Shaking of pyroclastic cones and the formation of granular flows on their flanks: Results from laboratory experiments

    Science.gov (United States)

    Cagnoli, B.; Romano, G. P.; Ventura, G.

    2015-11-01

    We have carried out laboratory experiments to study the generation of granular flows on the slopes of pyroclastic cones that are experiencing volcanic tremor or tectonic earthquakes. These experiments are inspired by the occurrence of granular flows on the flanks of Mount Vesuvius during its 1944 eruption. Our laboratory model consists of sand cones built around a vibrating tube which represents a volcanic conduit with erupting magma inside. A video camera allows the study of the granular flow inception, movement and deposition. Although the collapse of the entire cone is obtained at a specific resonance frequency, single granular flows can be generated by all the vibration frequencies (1-16 Hz) and all the vibration amplitudes (0.5-1.5 mm) that our experimental apparatus has allowed us to adopt. We believe that this is due to the fact that the energy threshold to trigger the flows is small in value. Therefore, if this is true in nature as well, shaken pyroclastic cones are always potentially dangerous because they can easily generate flows that can strike the surrounding areas.

  14. Insight from Laboratory Experiments on the Generation of Granular Flows on the Flanks of Vibrated Pyroclastic Cones

    Science.gov (United States)

    Cagnoli, B.; Romano, G. P.; Ventura, G.

    2015-12-01

    We have carried out laboratory experiments to study the generation of granular flows on the slopes of pyroclastic cones that are experiencing volcanic tremor or tectonic earthquakes. These experiments are inspired by the occurrence of granular flows on the flanks of Mount Vesuvius during its 1944 eruption. Our laboratory model consists of sand cones built around a vibrating tube which represents a volcanic conduit with erupting magma inside. A video camera allows the study of the granular flow inception, movement and deposition. Although the collapse of the entire cone is obtained at a specific resonance frequency, individual granular flows can be generated by all the vibration frequencies and all the vibration amplitudes that our experimental apparatus has allowed us to adopt. We believe that this is due to the fact that the energy threshold to generate the flows is small in value. Therefore, if this is true in nature as well, shaken pyroclastic cones are always potentially dangerous because they can easily generate flows that can strike the surrounding areas.

  15. Pion transverse-momentum spectrum, elliptic flow, and Hanbury-Brown-Twiss interferometry in a viscous granular source model

    CERN Document Server

    Yang, Jing; Ren, Yan-Yu

    2016-01-01

    We examine the evolution of quark-gluon plasma (QGP) droplets with viscous hydrodynamics and analyze pion transverse-momentum spectrum, elliptic flow, and Hanbury-Brown-Twiss (HBT) interferometry in a granular source model consisting of the viscous QGP droplets. The shear viscosity of the QGP droplet speeds up the droplet evolution and the effect of the bulk viscosity on the evolution is negligible. Although there are viscous effects on the droplet evolution, the pion momentum spectrum and elliptic flow change little for the granular sources with and without viscosity. On the other hand, the influence of viscosity on HBT radius $R_{\\rm out}$ is significant. It makes $R_{\\rm out}$ decrease in the granular source model. We determine the model parameters of granular sources by the experimental data of pion transverse-momentum spectrum, elliptic flow, and HBT radii together, and investigate the effects of viscosity on the model parameters. The results indicate that the granular source model may reproduce the expe...

  16. Constrained optimisation in granular network flows: Games with a loaded dice

    Science.gov (United States)

    Lin, Qun; Tordesillas, Antoinette

    2013-06-01

    Flows in real world networks are rarely the outcome of unconditional random allocations as, say, the roll of a dice. Think, for example, of force transmission through a contact network in a quasistatically deforming granular material. Forces `flow' through this network in a highly conditional manner. How much force is transmitted between two contacting particles is always conditional not only on all the other forces acting between the particles in question but also on those acting on the other particles in the system. Broadly, we are interested in the nature and extent to which flows through a contact network favour certain pathways over others, and how the mechanisms that govern such biased flows for a given imposed loading history determine the future evolution of the contact network. Our first step is to solve a selection of fundamental combinatorial optimisation problems on the contact network from the perspective of force transmission. Here we report on solutions to the Maximum Flow Minimum Cost Problem for a weighted contact network where the weights assigned to the links of the contact network are varied according to their contact types. We found that those pathways through which the maximum flow of force is transmitted, in the direction of the maximum principal stress, at minimum cost - pass through the great majority of the force chains. Although the majority of the contacts in these pathways are elastic, the plastic contacts bear an undue influence on the minimum cost.

  17. Simulation of the effect of defence structures on granular flows using SPH

    Directory of Open Access Journals (Sweden)

    P. Lachamp

    2002-01-01

    Full Text Available This paper presents the SPH (Smoothed Particles Hydrodynamics numerical method adapted to complex rheology and free surface flow. It has been developed to simulate the local effect of a simple obstacle on a granular flow. We have introduced this specific rheology to the classical formalism of the method and thanks to experimental devices, we were able to validate the results. Two viscosity values have been simultaneously computed to simulate "plugs" and "dead zone" with the same code. First, some experiments have been done on a simple inclined slope to show the accuracy of the numerical results. We have fixed the mass flow rate to see the variations of the flow depth according to the channel slope. Then we put a weir to block the flow and we analysed the dependence between the obstacle height and the length of influence upstream from the obstacle. After having shown that numerical results were consistent, we have studied speed profiles and pressure impact on the structure. Also results with any topography will be presented. This will have a great interest to study real flow over natural topography while using the model for decision help.

  18. Numerical simulation of failure behavior of granular debris flows based on flume model tests.

    Science.gov (United States)

    Zhou, Jian; Li, Ye-xun; Jia, Min-cai; Li, Cui-na

    2013-01-01

    In this study, the failure behaviors of debris flows were studied by flume model tests with artificial rainfall and numerical simulations (PFC(3D)). Model tests revealed that grain sizes distribution had profound effects on failure mode, and the failure in slope of medium sand started with cracks at crest and took the form of retrogressive toe sliding failure. With the increase of fine particles in soil, the failure mode of the slopes changed to fluidized flow. The discrete element method PFC(3D) can overcome the hypothesis of the traditional continuous medium mechanic and consider the simple characteristics of particle. Thus, a numerical simulations model considering liquid-solid coupled method has been developed to simulate the debris flow. Comparing the experimental results, the numerical simulation result indicated that the failure mode of the failure of medium sand slope was retrogressive toe sliding, and the failure of fine sand slope was fluidized sliding. The simulation result is consistent with the model test and theoretical analysis, and grain sizes distribution caused different failure behavior of granular debris flows. This research should be a guide to explore the theory of debris flow and to improve the prevention and reduction of debris flow.

  19. Numerical Simulation of Failure Behavior of Granular Debris Flows Based on Flume Model Tests

    Directory of Open Access Journals (Sweden)

    Jian Zhou

    2013-01-01

    Full Text Available In this study, the failure behaviors of debris flows were studied by flume model tests with artificial rainfall and numerical simulations (PFC3D. Model tests revealed that grain sizes distribution had profound effects on failure mode, and the failure in slope of medium sand started with cracks at crest and took the form of retrogressive toe sliding failure. With the increase of fine particles in soil, the failure mode of the slopes changed to fluidized flow. The discrete element method PFC3D can overcome the hypothesis of the traditional continuous medium mechanic and consider the simple characteristics of particle. Thus, a numerical simulations model considering liquid-solid coupled method has been developed to simulate the debris flow. Comparing the experimental results, the numerical simulation result indicated that the failure mode of the failure of medium sand slope was retrogressive toe sliding, and the failure of fine sand slope was fluidized sliding. The simulation result is consistent with the model test and theoretical analysis, and grain sizes distribution caused different failure behavior of granular debris flows. This research should be a guide to explore the theory of debris flow and to improve the prevention and reduction of debris flow.

  20. Implementation and Re nement of a Comprehensive Model for Dense Granular Flows

    Energy Technology Data Exchange (ETDEWEB)

    Sundaresan, Sankaran [The Trustees Of Princeton University, Princeton, NJ (United States)

    2015-09-30

    Dense granular ows are ubiquitous in both natural and industrial processes. They manifest three di erent ow regimes, each exhibiting its own dependence on solids volume fraction, shear rate, and particle-level properties. This research project sought to develop continuum rheological models for dense granular ows that bridges multiple regimes of ow, implement them in open-source platforms for gas-particle ows and perform test simulations. The rst phase of the research covered in this project involved implementation of a steady- shear rheological model that bridges quasi-static, intermediate and inertial regimes of ow into MFIX (Multiphase Flow with Interphase eXchanges - a general purpose computer code developed at the National Energy Technology Laboratory). MFIX simulations of dense granular ows in hourglass-shaped hopper were then performed as test examples. The second phase focused on formulation of a modi ed kinetic theory for frictional particles that can be used over a wider range of particle volume fractions and also apply for dynamic, multi- dimensional ow conditions. To guide this work, simulations of simple shear ows of identical mono-disperse spheres were also performed using the discrete element method. The third phase of this project sought to develop and implement a more rigorous treatment of boundary e ects. Towards this end, simulations of simple shear ows of identical mono-disperse spheres con ned between parallel plates were performed and analyzed to formulate compact wall boundary conditions that can be used for dense frictional ows at at frictional boundaries. The fourth phase explored the role of modest levels of cohesive interactions between particles on the dense phase rheology. The nal phase of this project focused on implementation and testing of the modi ed kinetic theory in MFIX and running bin-discharge simulations as test examples.

  1. Investigation of the effect of wall friction on the flow rate in 2D and 3D Granular Flow

    Science.gov (United States)

    Carballo-Ramirez, Brenda; Pleau, Mollie; Easwar, Nalini; Birwa, Sumit; Shah, Neil; Tewari, Shubha

    We have measured the mass flow rate of spherical steel spheres under gravity in vertical, straight-walled 2 and 3-dimensional hoppers, where the flow velocity is controlled by the opening size. Our measurements focus on the role of friction and its placement along the walls of the hopper. In the 2D case, an increase in the coefficient of static friction from μ = 0.2 to 0.6 is seen to decrease the flow rate significantly. We have changed the placement of frictional boundaries/regions from the front and back walls of the 2D hopper to the side walls and floor to investigate the relative importance of the different regions in determining the flow rate. Fits to the Beverloo equation show significant departure from the expected exponent of 1.5 in the case of 2D flow. In contrast, 3D flow rates do not show much dependence on wall friction and its placement. We compare the experimental data to numerical simulations of gravity driven hopper granular flow with varying frictional walls constructed using LAMMPS*. *http://lammps.sandia.gov Supported by NSF MRSEC DMR 0820506.

  2. Three-dimensional dynamic topographic survey of granular flows using photogrammetric techniques

    Science.gov (United States)

    Dallavalle, D.; Scotton, P.; Tecca, P. R.

    2012-04-01

    In order to better characterize the behavior of fast dry granular mass movements, such as dense snow or rock avalanches, laboratory analyses have been undertaken in a model scale (Froude similarity, geometrical scale of the order of 50:1 - 100:1). To this end, an experimental flume, consisting of two planes with adjustable inclination, has been used: the upstream plane, with slope varying from 15% to 60%, simulates the flowing zone and the downstream plane, with slopes ranging from 0% to 30%, simulates the deposition zone. The experimental apparatus has been completed in order to obtain a three-dimensional dynamic topographic survey of the sliding free surface, using photogrammetric techniques. The experiments are being performed using a maximum of eight industrial digital video-cameras. A full photogrammetric camera calibration process has been first conducted in order to define the parameters of inner orientation of the cameras and of the objective lenses distortion, in order to reduce the uncertainties in the collinearity equations. The recording time is digitally triggered at the same time to all the cameras. A dedicated acquisition code, based on LabView software, has been realized to achieve the best accuracy in the frames synchronization. The surface is reconstructed, at different times, using the frames taken at the same instant from the different video-cameras. The photogrammetric analysis has being performed by means of commercial dedicated software. As a final product of the research it is expected the tuning of an automatic procedure for the photogrammetric analysis of the series of frames taken in order to describe the dynamic evolution of the motion of a granular mass driven by the gravity and the limits of the proposed techniques. The dynamic three-dimensional reconstruction of the free surface of the sliding granular mass will be used in the calibration process of granular mathematical-numerical models. The comprehension and the estimation of the

  3. DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

    Science.gov (United States)

    Pizette, Patrick; Govender, Nicolin; Wilke, Daniel N.; Abriak, Nor-Edine

    2017-06-01

    The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time.

  4. Numerical Modeling of Particle-Fluid Mixtures in a Subglacial Setting: Granular Deformation and Hydrological Flow Response

    Science.gov (United States)

    Damsgaard, A.; Egholm, D. L.; Piotrowski, J. A.; Tulaczyk, S. M.; Larsen, N. K.

    2014-12-01

    The coupled mechanical response of ice, water and sediment may control the flow of warm-based glaciers residing on deformable sediment. This is most clearly expressed by the fast flowing ice streams in Greenland and Antarctica, where low levels of basal friction are thought to support the high flow rates. These ice streams are of particular interest since they are large constituents of the polar ice sheet mass balance. The study of these ice streams and their future impact on the ice sheets necessitates a deeper understanding of their basal dynamics, including the rheology of water-saturated sediment. We present the methodology and first results of a coupled numerical model for computational experiments on granular-fluid mixtures under dynamic conditions similar to those in subglacial settings. The granular phase is simulated on a per-particle basis by the soft body discrete element method. The fluid phase is handled as a continuum by solving the incompressible Navier-Stokes equations. The particle and fluid phases are coupled by mass conservation and momentum exchanges. The hydraulic diffusivity and permeability is compared to previous laboratory studies on tills. We demonstrate how the onset and halt of granular deformation is an efficient mechanism to create fluid pressure fluctuations due to local porosity changes. These pressure anomalies are driving transient hydraulic flows, and they influence directly the rheology of granular-fluid mixtures. Our results highlight the nonlinear nature of water saturated granular deformation, and demonstrate how the mechanical behaviour of granular materials may include both brittle and viscous components depending on the rates of deformation and the hydrological properties.

  5. Spreading and Deposit Characteristics of a Rapid Dry Granular Avalanche Across 3D Topography: Experimental Study

    Science.gov (United States)

    Wang, Yu-Feng; Xu, Qiang; Cheng, Qian-Gong; Li, Yan; Luo, Zhong-Xu

    2016-11-01

    Aiming to understand the propagation and deposit behaviours of a granular avalanche along a 3D complex basal terrain, a new 3D experimental platform in 1/400 scale was developed according to the natural terrain of the Xiejiadianzi rock avalanche, with a series of laboratory experiments being conducted. Through the conduction of these tests, parameters, including the morphological evolution of sliding mass, run-outs and velocities of surficial particles, thickness contour and centre of final deposit, equivalent frictional coefficient, and energy dissipation, are documented and analysed, with the geomorphic control effect, material grain size effect, drop angle effect, and drop distance effect on rock avalanche mobility being discussed primarily. From the study, some interesting conclusions for a better understanding of rock avalanche along a 3D complex basal topography are reached. (1) For the granular avalanche tested in this study, great differences between the evolutions of the debris along the right and left branch valleys were observed, with an obvious geomorphic control effect on avalanche mobility presented. In addition, some other interesting features, including groove-like trough and superelevation, were also observed under the control of the topographic interferences. (2) The equivalent frictional coefficients of the granular avalanches tested here range from 0.48 to 0.57, which is lower than that reached with a set-up composed of an inclined chute and horizontal plate and higher than that reached using a set-up composed of only an inclined chute. And the higher the drop angle and fine particle content, the higher the equivalent frictional coefficient. The effect of drop distance on avalanche mobility is minor. (3) For a granular avalanche, momentum transfer plays an important role in the motion of mass, which can accelerate the mobility of the front part greatly through delivering the kinetic energy of the rear part to the front.

  6. Quantitative test of the time dependent Gintzburg-Landau equation for sheared granular flow in two dimensions

    NARCIS (Netherlands)

    Saitoh, K.; Hayakawa, Hisao

    2013-01-01

    We examine the validity of the time-dependent Ginzburg-Landau equation of granular fluids for a plane shear flow under the Lees-Edwardsboundary condition derivedfrom a weakly nonlinear analysis through the comparison with the result of discrete element method.We verify quantitative agreements in the

  7. Cross-validation of 3D particle tracking velocimetry for the study of granular flows down rotating chutes

    NARCIS (Netherlands)

    Shirsath, S.S.; Padding, J.T.; Clercx, H.J.H.; Kuipers, J.A.M.

    2015-01-01

    Three-dimensional particle tracking velocimetry (3D-PTV) is a promising technique to study the behavior of granular flows. The aim of this paper is to cross-validate 3D-PTV against independent or more established techniques, such as particle image velocimetry (PIV), electronic ultrasonic sensor meas

  8. Vortices and Particle-banding in Granular Taylor-Couette Flow

    Science.gov (United States)

    Mahajan, Achal; Alam, Meheboob

    2016-11-01

    A collection of smooth inelastic hard spheres is simulated between two rotating concentric cylinders, dubbed granular Taylor-Couette flow (gTCF), using event-driven molecular dynamics simulations. The inner cylinder is rotating with rotational speed ωi and the outer cylinder is kept stationary in the absence of gravity. The onset of Taylor-like vortices is studied as functions of the inner rotation ωi, the restitution coefficient (en) and the aspect ratio of the cylinder. The strength of vortices is found to decrease with increasing dissipation. A novel banding-pattern of particle-rich and particle-depleted regions along the axial direction is found - the density-contrast between the dense and dilute regions increases with decreasing restitution coefficient. The combined effect of inelastic dissipation and compressibility seems to be responsible for the genesis of Taylor-like vortices with axial-banding of particles.

  9. In situ bioremediation: A network model of diffusion and flow in granular porous media

    Energy Technology Data Exchange (ETDEWEB)

    Griffiths, S.K.; Nilson, R.H.; Bradshaw, R.W.

    1997-04-01

    In situ bioremediation is a potentially expedient, permanent and cost- effective means of waste site decontamination. However, permeability reductions due to the transport and deposition of native fines or due to excessive microorganism populations may severely inhibit the injection of supplemental oxygen in the contamination zone. To help understand this phenomenon, we have developed a micro-mechanical network model of flow, diffusion and particle transport in granular porous materials. The model differs from most similar models in that the network is defined by particle positions in a numerically-generated particle array. The model is thus widely applicable to computing effective transport properties for both ordered and realistic random porous media. A laboratory-scale apparatus to measure permeability reductions has also been designed, built and tested.

  10. Sound of silo's: An experimental investigation into sound emissions from granular flows in a vertical tube

    Science.gov (United States)

    Porte, Elze; Masen, Marc; Vriend, Nathalie; de Boer, Andre

    2015-11-01

    When large storage silo's containing granular material are discharged, a loud sound emits from the silo. The noise causes disturbances for people working on site and for nearby residential areas. Insufficient knowledge exists to solve the problem efficiently and adequately. An experimental study using a scaled silo setup shows that the particle flow dynamics and system characteristics are both actors in determining the occurrence of the sound and its frequency. The extensive use of frequency analysis provides new insights into the complexity of the related parameters. The particle flow and tube characteristics are manipulated by changing the outflow rate, bulk material, wall material, wall pressure and tube dimensions. Frequency analysis of the recorded sound shows that the frequency depends on both the externally forced parameter changes and internal changes during flow. The latter indicates that during the flow, characteristic properties such as the packing fraction and sound speed change. As a result, the frequency changes as well. However, the external parameters that are manipulated as an initial condition are equally important in describing the frequency response.

  11. Characterizing local forces and rearrangements inside a gravity-driven granular flow

    Science.gov (United States)

    Thackray, Emma; Nordstrom, Kerstin

    While the gravity-driven flow of a granular material in a silo geometry can be modeled by the Beverloo equation, the mesoscale-level particle rearrangements and interactions that drive this flow are not well-understood. We have constructed a quasi-two-dimensional system of bidisperse, millimeter-scale disks with photoelastic properties that make force networks within the material visible. The system is contained in an acrylic box with an adjustable bottom opening. We can approach the clogging transition by adjusting this opening and by adding external forcing to the top of the flowing pile. By placing the system between cross-polarizers, we can obtain high-speed video of this system during flow, and extract intensity signals that can be used to identify and quantify localized, otherwise indeterminate forces. We can simultaneously track individual particle motions, which can be used to identify shear transformation zones in the system. We are therefore able to correlate local forces with rearrangements within the system, and characterize the evolution of this interplay on the approach to the clogging transition.

  12. Granular Flow Dynamics on Earth, Moon, and Mars from analytical, numerical and field analysis

    Science.gov (United States)

    Lucas, A.; Mangeney, A.; Mhge, D.

    2010-12-01

    Prediction of landslides dynamics remains difficult in spite of a considerable body of work. A number of previous studies have been based on runout analysis in relation to mean dissipation calibration via the friction coefficient. However, the shape of the initial scar is generally unknown in real cases, which weakens landslide material spreading predictions and has alters calibration parameters of numerical models. We study numerically the effects of scar geometry on flow and distribution of the deposits and show that the initial shape of the scar, independent of the friction coefficient, does not affect the runout distance. In contrast, 3D tests show that the shape of the final deposits is a function of the scar geometry, and hence information on initial scar geometry and initial volume involved in the mass spreading may be retrieved from analysis of final deposit morphology. From an analytical solution we show here why the classical mobility (defined as the ratio between total height and runout distance) decreases when the volume increases, as is generally observed in geological data. We thus introduce analytically a new mobility variable obtained from geomorphic measurements reflecting the intrinsic dissipation independent of the aspect ratio, of the volume of the granular mass involved, of the underlying topography, and of the initial scar geometry. Comparison between experimental results, terrestrial, Lunar and Martian cases highlights a larger new mobility measure of natural granular flows compared to dry mass spreading simulated in the laboratory. In addition, landslides in a similar geological context give a single value showing the robustness of this new parameter. Finally, the new mobility provides a first order estimate of the effective friction required in models to reproduce the extent of the deposits in a given geological context. This enables a feedback analysis method for retrieving the volume and shape of the initial landslide material and then

  13. Concentration profiles in the wake of a sphere buried in a granular bed through which fluid flows

    Energy Technology Data Exchange (ETDEWEB)

    Guedes de Carvalho, J.R.F.; Delgado, J.M.P.Q.; Alves, M.A. [Porto Univ., Dpet. de Engenharia Quimica, Faculdade de Engenharia (Portugal)

    2005-07-01

    The concentration distribution in the wake of a soluble sphere immersed in a granular bed of inerts has been obtained numerically, for transport by both advection and diffusion/dispersion. Fluid flow in the granular bed around the sphere was assumed to follow Darcy's law and, at each point, dispersion of solute was considered in both the cross-stream and stream-wise directions. The elliptic PDE equation, resulting from a differential material balance on the solute, has been solved numerically over a wide range of values of the relevant parameters. (authors)

  14. Meandering instability of air flow in a granular bed: self-similarity and fluid-solid duality

    CERN Document Server

    Yoshimura, Yuki; Okumura, Ko

    2016-01-01

    Meandering instability is familiar to everyone through river meandering or small rivulets of rain flowing down a windshield. However, its physical understanding is still premature, although it could inspire researchers in various fields, such as nonlinear science, fluid mechanics and geophysics, to resolve their long-standing problems. Here, we perform a small-scale experiment in which air flow is created in a thin granular bed to successfully find a meandering regime, together with other remarkable fluidized regimes, such as a turbulent regime. We discover that phase diagrams of the flow regimes for different types of grains can be universally presented as functions of the flow rate and the granular-bed thickness when the two quantities are properly renormalized. We further reveal that the meandering shapes are self-similar as was shown for meandering rivers. The experimental findings are explained by theory, with elucidating the physics. The theory is based on force balance, a minimum-dissipation principle,...

  15. Euler-Euler granular flow model of liquid fuels combustion in a fluidized reactor

    Directory of Open Access Journals (Sweden)

    Nemoda Stevan

    2015-01-01

    Full Text Available The paper deals with the numerical simulation of liquid fuel combustion in a fluidized reactor using a two-fluid Eulerian-Eulerian fluidized bed modeling incorporating the kinetic theory of granular flow (KTGF to gas and solid phase flow prediction. The comprehensive model of the complex processes in fluidized combustion chamber incorporates, besides gas and particular phase velocity fields’ prediction, also the energy equations for gas and solid phase and the transport equations of chemical species conservation with the source terms due to the conversion of chemical components. Numerical experiments show that the coefficients in the model of inter-phase interaction drag force have a significant effect, and they have to be adjusted for each regime of fluidization. A series of numerical experiments was performed with combustion of the liquid fuels in fluidized bed (FB, with and without significant water content. The given estimations are related to the unsteady state, and the modeled time period corresponds to flow passing time throw reactor column. The numerical experiments were conducted to examine the impact of the water content in a liquid fuel on global FB combustion kinetics.

  16. A study of the rheology of planar granular flow of dumbbells using discrete element method simulations

    Science.gov (United States)

    Mandal, Sandip; Khakhar, D. V.

    2016-10-01

    Granular materials handled in industries are typically non-spherical in shape and understanding the flow of such materials is important. The steady flow of mono-disperse, frictional, inelastic dumbbells in two-dimensions is studied by soft sphere, discrete element method simulations for chute flow and shear cell flow. The chute flow data are in the dense flow regime, while the shear cell data span a wide range of solid fractions. Results of a detailed parametric study for both systems are presented. In chute flow, increase in the aspect ratio of the dumbbells results in significant slowing of the flow at a fixed inclination and in the shear cell it results in increase in the shear stress and pressure for a fixed shear rate. The flow is well-described by the μ-I scaling for inertial numbers as high as I = 1, corresponding to solid fractions as low as ϕ = 0.3, where μ is the effective friction (the ratio of shear stress to pressure) and I is the inertial number (a dimensionless shear rate scaled with the time scale obtained from the local pressure). For a fixed inertial number, the effective friction increases by 60%-70% when aspect ratio is increased from 1.0 (sphere) to 1.9. At low values of the inertial number, there is little change in the solid fraction with aspect ratio of the dumbbells, whereas at high values of the inertial number, there is a significant increase in solid fraction with increase in aspect ratio. The dense flow data are well-described by the Jop-Forterre-Pouliquen model [P. Jop et al., Nature 441, 727-730 (2006)] with the model parameters dependent on the dumbbell aspect ratio. The variation of μ with I over the extended range shows a maximum in the range I ∈ (0.4, 0.5), while the solid fraction shows a faster than linear decrease with inertial number. A modified version of the JFP model for μ(I) and a power law model for ϕ(I) is shown to describe the combined data over the extended range of I.

  17. Bouncing, rolling, energy flows, and cluster formation in a two-dimensional vibrated granular gas

    Science.gov (United States)

    Pérez-Ángel, Gabriel; Nahmad-Molinari, Yuri

    2011-10-01

    We study the formation of crystalline clusters for a two-dimensional (2D) sinusoidally vibrated granular gas, with maximum vertical acceleration smaller than gravity, using fully 3D simulations. It is found that this phenomenon arises from the spontaneous segregation of the granulate into two dynamical modes: one of grains that bounce in synchrony with the motion of the sustaining plate (“bouncers”) and another of grains that cease to bounce and simply rolls on the plate, without ever loosing contact with it (“rollers”). These two dynamical categories are quite robust with respect to perturbations. The populations for bouncers and rollers depend on the preparation of the granulate and can be made to take arbitrary values in all the range of accelerations where both dynamical modes are present. It is found that the dynamical mode with the largest population coalesces in clusters under the influence of the other mode, whose grains act as a higher pressure gas that compresses the clusters. In this way it is possible to produce clusters of rollers or clusters of bouncers. A gas made of grains from only one dynamical class shows only weak density fluctuations. When the occupation fractions for both modes are similar, one observes segregation and clusters of both types. The clustering of the gas is monitored using both the average coordination number and the local hexatic order parameter ψ6. Energy flows in the plane are monitored, and it is shown that roller-bouncer collisions increase horizontal kinetic energy, while all other types of collisions reduce this energy. We find that friction with the substrate is the main sink of horizontal energy for these granular gases.

  18. Numerical simulation of two-dimensional steady granular flows in rotating drum: On surface flow rheology

    Science.gov (United States)

    Renouf, M.; Bonamy, D.; Dubois, F.; Alart, P.

    2005-10-01

    The rheology of two-dimensional steady surface flow of cohesionless cylinders in a rotating drum is investigated through nonsmooth contact dynamics simulations. Profiles of volume fraction, translational and angular velocity, rms velocity, strain rate, and stress tensor are measured at the midpoint along the length of the surface-flowing layer, where the flow is generally considered as steady and homogeneous. Analysis of these data and their interrelations suggest the local inertial number—defined as the ratio between local inertial forces and local confinement forces—to be the relevant dimensionless parameter to describe the transition from the quasistatic part of the packing to the flowing part at the surface of the heap. Variations of the components of the stress tensor as well as the ones of rms velocity as a function of the inertial number are analyzed within both the quasistatic and the flowing phases. Their implications are discussed.

  19. Pion Transverse Momentum Spectrum, Elliptic Flow, and Interferometry in the Granular Source Model for RHIC and LHC Heavy Ion Collisions

    Directory of Open Access Journals (Sweden)

    Jing Yang

    2015-01-01

    Full Text Available We systematically investigate the pion transverse momentum spectrum, elliptic flow, and Hanbury-Brown-Twiss (HBT interferometry in the granular source model for the heavy ion collisions of Au-Au at sNN=200 GeV and Pb-Pb at sNN=2.76 TeV with different centralities. The granular source model can well reproduce the experimental results of the heavy ion collisions at the Relativistic Heavy Ion Collider (RHIC and the Large Hadron Collider (LHC. We examine the parameters involved in the granular source model. The experimental data of the momentum spectrum, elliptic flow, and HBT radii for the two collision energies and different centralities impose very strict constraints on the model parameters. They exhibit certain regularities for collision centrality and energy. The space-time structure and expansion velocities of the granular sources for the heavy ion collisions at the RHIC and LHC energies with different centralities are investigated.

  20. Numerical Study of Granular Scaffold Efficiency to Convert Fluid Flow into Mechanical Stimulation in Bone Tissue Engineering.

    Science.gov (United States)

    Cruel, Magali; Bensidhoum, Morad; Nouguier-Lehon, Cécile; Dessombz, Olivier; Becquart, Pierre; Petite, Hervé; Hoc, Thierry

    2015-09-01

    Controlling the mechanical environment in bioreactors represents a key element in the reactors' optimization. Positive effects of fluid flow in three-dimensional bioreactors have been observed, but local stresses at cell scale remain unknown. These effects led to the development of numerical tools to assess the micromechanical environment of cells in bioreactors. Recently, new possible scaffold geometry has emerged: granular packings. In the present study, the primary goal was to compare the efficiency of such a scaffold to the other ones from literature in terms of wall shear stress levels and distributions. To that aim, three different types of granular packings were generated through discrete element method, and computational fluid dynamics was used to simulate the flow within these packings. Shear stress levels and distributions were determined. A linear relationship between shear stress and inlet velocity was observed, and its slope was similar to published data. The distributions of normalized stress were independent of the inlet velocity and were highly comparable to those of widely used porous scaffolds. Granular packings present similar features to more classical porous scaffolds and have the advantage of being easy to manipulate and seed. The methods of this work are generalizable to the study of other granular packing configurations.

  1. Transition in a granular chute flow due to periodic and aperiodic perturbations

    Science.gov (United States)

    S, Bharathraj; v, Kumaran

    2015-11-01

    Granular flow down an inclined plane exhibits a transition from a disordered,random state to an ordered state with layers of particles with in-layer hexagonal order, when there is a small change in the roughness of the base. In earlier studies,a rough base was created using a random arrangement of frozen particles at the base,and the roughness was varied by varying the ratio of the frozen and moving particle diameters.Here,the effect of a different form of base roughness,which is sinusoidal perturbations of varying amplitude and wavelength,is also examined. The transition from an ordered to disordered state is also observed when a sinusoidal base is used, when the amplitude of the sine wave increases beyond a critical value.The critical amplitude initially increases as the wavelength is increased, reaches a maximum and then decreases as the wavelength is further increased. The critical amplitude also increases as the height of the flow increases.The states induced by the sinusoidal base have peculiar transient features, where there is a tendency to order at intermediate times in disordered states, unlike the rough base where no such tendency is observed.We also formulate a boundary layer theory for the ordered state, which develops in two distinct stages of shear propagation

  2. A Parametric Study of Mixing in a Granular Flow a Bi-Axial Spherical Tumbler

    CERN Document Server

    Christov, Ivan C; Ottino, Julio M; Sturman, Rob

    2015-01-01

    We report on a computational parameter space study of mixing protocols for a half-full bi-axial spherical granular tumbler. The quality of mixing is quantified via the intensity of segregation (concentration variance) and computed as a function of three system parameters: angles of rotation about each tumbler axis and the flowing layer depth. Only the symmetric case is considered in which the flowing layer depth is the same for each rotation. We also consider the dependence on $\\bar{R}$, which parametrizes the concentric spheroids ("shells") that comprise the volume of the tumbler. The intensity of segregation is computed over 100 periods of the mixing protocol for each choice of parameters. Each curve is classified via a time constant, $\\tau$, and an asymptotic mixing value, $bias$. We find that most choices of angles and most shells throughout the tumbler volume mix well, with mixing near the center of the tumbler being consistently faster (small $\\tau$) and more complete (small $bias$). We conclude with ex...

  3. Granular flow in static mixers by coupled DEM/CFD approach

    Directory of Open Access Journals (Sweden)

    Pezo Lato

    2016-01-01

    Full Text Available The mixing process greatly influence the mixing efficiency, as well as the quality and the price of the intermediate and/or the final product. Static mixer is used for premixing action before the main mixing process, for significant reduction of mixing time and energy consumption. This type of premixing action is not investigated in detail in the open literature. In this article, the novel numerical approach called Discrete Element Method is used for modelling of granular flow in multiple static mixer applications (1 - 3 Komax or Ross mixing elements were utilized, while the Computational Fluid Dynamic method was chosen for fluid flow modelling, using the Eulerian multiphase model. The main aim of this article is to predict the behaviour of granules being gravitationally transported in different mixer configuration and to choose the best configuration of the mixer taking into account the total particle path, the number of mixing elements and the quality of the obtained mixture. The results of the numerical simulations in the static mixers were compared to experimental results, the mixing quality is examined by RSD (relative standard deviation criterion, and the effects on the mixer type and the number of mixing elements on mixing process were studied. The effects of the mixer type and the number of mixing elements on mixing process were studied using analysis of variance (ANOVA. Mathematical modelling is used for optimization of number of Ross and Komax segments in mixer in order to gain desirable mixing results. [Projekat Ministarstva nauke Republike Srbije, br. TR31055

  4. Physical modelling of rainfall-induced flow failures in loose granular soils

    Science.gov (United States)

    Take, W. A.; Beddoe, R. A.

    2015-09-01

    The tragic consequences of the March 2014 Oso landslide in Washington, USA were particularly high due to the mobility of the landslide debris. Confusingly, a landslide occurred at that exact same location a number of years earlier, but simply slumped into the river at the toe of the slope. Why did these two events differ so drastically in their mobility? Considerable questions remain regarding the conditions required to generate flow failures in loose soils. Geotechnical centrifuge testing, in combination with high-speed cameras and advanced image analysis has now provided the landslides research community with a powerful new tool to experimentally investigate the complex mechanics leading to high mobility landslides. This paper highlights recent advances in our understanding of the process of static liquefaction in loose granular soil slopes achieved through observations of highly-instrumented physical models. In particular, the paper summarises experimental results aimed to identify the point of initiation of the chain-reaction required to trigger liquefaction flow failures, to assess the effect of slope inclination on the likelihood of a flowslide being triggered, and to quantify the effect of antecedent groundwater levels on the distal reach of landslide debris with the objective of beginning to explain why neighbouring slopes can exhibit such a wide variation in landslide travel distance upon rainfall-triggering.

  5. Resolved granular debris-flow simulations with a coupled SPH-DCDEM model

    Science.gov (United States)

    Birjukovs Canelas, Ricardo; Domínguez, José M.; Crespo, Alejandro J. C.; Gómez-Gesteira, Moncho; Ferreira, Rui M. L.

    2016-04-01

    Debris flows represent some of the most relevant phenomena in geomorphological events. Due to the potential destructiveness of such flows, they are the target of a vast amount of research (Takahashi, 2007 and references therein). A complete description of the internal processes of a debris-flow is however still an elusive achievement, explained by the difficulty of accurately measuring important quantities in these flows and developing a comprehensive, generalized theoretical framework capable of describing them. This work addresses the need for a numerical model applicable to granular-fluid mixtures featuring high spatial and temporal resolution, thus capable of resolving the motion of individual particles, including all interparticle contacts. This corresponds to a brute-force approach: by applying simple interaction laws at local scales the macro-scale properties of the flow should be recovered by upscaling. This methodology effectively bypasses the complexity of modelling the intermediate scales by resolving them directly. The only caveat is the need of high performance computing, a demanding but engaging research challenge. The DualSPHysics meshless numerical implementation, based on Smoothed Particle Hydrodynamics (SPH), is expanded with a Distributed Contact Discrete Element Method (DCDEM) in order to explicitly solve the fluid and the solid phase. The model numerically solves the Navier-Stokes and continuity equations for the liquid phase and Newton's motion equations for solid bodies. The interactions between solids are modelled with classical DEM approaches (Kruggel-Emden et al, 2007). Among other validation tests, an experimental set-up for stony debris flows in a slit check dam is reproduced numerically, where solid material is introduced trough a hopper assuring a constant solid discharge for the considered time interval. With each sediment particle undergoing tens of possible contacts, several thousand time-evolving contacts are efficiently treated

  6. Textural evidence for jamming and dewatering of a sub-surface, fluid-saturated granular flow

    Science.gov (United States)

    Sherry, T. J.; Rowe, C. D.; Kirkpatrick, J. D.; Brodsky, E. E.

    2011-12-01

    Sand injectites are spectacular examples of large-scale granular flows involving migration of hundreds of cubic meters of sand slurry over hundreds of meters to kilometers in the sub-surface. By studying the macro- and microstructural textures of a kilometer-scale sand injectite, we interpret the fluid flow regimes during emplacement and define the timing of formation of specific textures in the injected material. Fluidized sand sourced from the Santa Margarita Fm., was injected upward into the Santa Cruz Mudstone, Santa Cruz County, California. The sand injectite exposed at Yellow Bank Beach records emplacement of both hydrocarbon and aqueous sand slurries. Elongate, angular mudstone clasts were ripped from the wall rock during sand migration, providing evidence for high velocity, turbid flow. However, clast long axis orientations are consistently sub-horizontal suggesting the slurry transitioned to a laminar flow as the flow velocity decreased in the sill-like intrusion. Millimeter to centimeter scale laminations are ubiquitous throughout the sand body and are locally parallel to the mudstone clast long axes. The laminations are distinct in exposure because alternating layers are preferentially cemented with limonite sourced from later groundwater infiltration. Quantitative microstructural analyses show that the laminations are defined by subtle oscillations in grain alignment between limonite and non-limonite stained layers. Grain packing, size and shape distributions do not vary. The presence of limonite in alternating layers results from differential infiltration of groundwater, indicating permeability changes between the layers despite minimal grain scale differences. Convolute dewatering structures deform the laminations. Dolomite-cemented sand, a signature of hydrocarbon saturation, forms irregular bodies that cross-cut the laminations and dewatering structures. Laminations are not formed in the dolomite-cemented sand. The relative viscosity difference

  7. Flow of variably fluidized granular masses across three-dimensional terrain I. Coulomb mixture theory

    Science.gov (United States)

    Iverson, R.M.; Denlinger, R.P.

    2001-01-01

    Rock avalanches, debris flows, and related phenomena consist of grain-fluid mixtures that move across three-dimensional terrain. In all these phenomena the same basic forces, govern motion, but differing mixture compositions, initial conditions, and boundary conditions yield varied dynamics and deposits. To predict motion of diverse grain-fluid masses from initiation to deposition, we develop a depth-averaged, threedimensional mathematical model that accounts explicitly for solid- and fluid-phase forces and interactions. Model input consists of initial conditions, path topography, basal and internal friction angles of solid grains, viscosity of pore fluid, mixture density, and a mixture diffusivity that controls pore pressure dissipation. Because these properties are constrained by independent measurements, the model requires little or no calibration and yields readily testable predictions. In the limit of vanishing Coulomb friction due to persistent high fluid pressure the model equations describe motion of viscous floods, and in the limit of vanishing fluid stress they describe one-phase granular avalanches. Analysis of intermediate phenomena such as debris flows and pyroclastic flows requires use of the full mixture equations, which can simulate interaction of high-friction surge fronts with more-fluid debris that follows. Special numerical methods (described in the companion paper) are necessary to solve the full equations, but exact analytical solutions of simplified equations provide critical insight. An analytical solution for translational motion of a Coulomb mixture accelerating from rest and descending a uniform slope demonstrates that steady flow can occur only asymptotically. A solution for the asymptotic limit of steady flow in a rectangular channel explains why shear may be concentrated in narrow marginal bands that border a plug of translating debris. Solutions for static equilibrium of source areas describe conditions of incipient slope instability

  8. Vibrationally-Fluidized Granular Flows: Impact and Bulk Velocity Measurements Compared with Discrete Element and Continuum Models

    Science.gov (United States)

    Hashemnia, Kamyar

    A new laser displacement probe was developed to measure the impact velocities of particles within vibrationally-fluidized beds. The sensor output was also used to measure bulk flow velocity along the probe window and to provide a measure of the media packing. The displacement signals from the laser sensors were analyzed to obtain the probability distribution functions of the impact velocity of the particles. The impact velocity was affected by the orientation of the laser probe relative to the bulk flow velocity, and the density and elastic properties of the granular media. The impact velocities of the particles were largely independent of their bulk flow speed and packing density. Both the local impact and bulk flow velocities within a tub vibratory finisher were predicted using discrete element modelling (DEM) and compared to the measured values for spherical steel media. It was observed that the impact and bulk flow velocities were relatively insensitive to uncertainties in the contact coefficients of friction and restitution. It was concluded that the predicted impact and bulk flow velocities were dependent on the number of layers in the model. Consequently, the final DE model mimicked the key aspects of the experimental setup, including the submerged laser sensor. The DE method predictions of both impact velocity and bulk flow velocity were in reasonable agreement with the experimental measurements, with maximum differences of 20% and 30%, respectively. Discrete element modeling of granular flows is effective, but requires large numerical models. In an effort to reduce computational effort, this work presents a finite element (FE) continuum model of a vibrationally-fluidized granular flow. The constitutive equations governing the continuum model were calibrated using the discrete element method (DEM). The bulk flow behavior of the equivalent continuum media was then studied using both Lagrangian and Eulerian FE formulations. The bulk flow velocities predicted

  9. VELOCITY FIELD COMPUTATION IN VIBRATED GRANULAR MEDIA USING AN OPTICAL FLOW BASED MULTISCALE IMAGE ANALYSIS METHOD

    Directory of Open Access Journals (Sweden)

    Johan Debayle

    2011-05-01

    Full Text Available An image analysis method has been developed in order to compute the velocity field of a granular medium (sand grains, mean diameter 600 μm submitted to different kinds of mechanical stresses. The differential method based on optical flow conservation consists in describing a dense motion field with vectors associated to each pixel. A multiscale, coarse-to-fine, analytical approach through tailor sized windows yields the best compromise between accuracy and robustness of the results, while enabling an acceptable computation time. The corresponding algorithmis presented and its validation discussed through different tests. The results of the validation tests of the proposed approach show that the method is satisfactory when attributing specific values to parameters in association with the size of the image analysis window. An application in the case of vibrated sand has been studied. An instrumented laboratory device provides sinusoidal vibrations and enables external optical observations of sand motion in 3D transparent boxes. At 50 Hz, by increasing the relative acceleration G, the onset and development of two convective rolls can be observed. An ultra fast camera records the grain avalanches, and several pairs of images are analysed by the proposed method. The vertical velocity profiles are deduced and allow to precisely quantify the dimensions of the fluidized region as a function of G.

  10. Microscopic Description of the Granular Fluidity Field in Nonlocal Flow Modeling

    Science.gov (United States)

    Zhang, Qiong; Kamrin, Ken

    2017-02-01

    A recent granular rheology based on an implicit "granular fluidity" field has been shown to quantitatively predict many nonlocal phenomena. However, the physical nature of the field has not been identified. Here, the granular fluidity is found to be a kinematic variable given by the velocity fluctuation and packing fraction. This is verified with many discrete element simulations, which show that the operational fluidity definition, solutions of the fluidity model, and the proposed microscopic formula all agree. Kinetic theoretical and Eyring-like explanations shed insight into the obtained form.

  11. Microscopic Description of the Granular Fluidity Field in Nonlocal Flow Modeling.

    Science.gov (United States)

    Zhang, Qiong; Kamrin, Ken

    2017-02-03

    A recent granular rheology based on an implicit "granular fluidity" field has been shown to quantitatively predict many nonlocal phenomena. However, the physical nature of the field has not been identified. Here, the granular fluidity is found to be a kinematic variable given by the velocity fluctuation and packing fraction. This is verified with many discrete element simulations, which show that the operational fluidity definition, solutions of the fluidity model, and the proposed microscopic formula all agree. Kinetic theoretical and Eyring-like explanations shed insight into the obtained form.

  12. Flow above and within granular media composed of spherical and non-spherical particles - using a 3D numerical model

    Science.gov (United States)

    Bartzke, Gerhard; Kuhlmann, Jannis; Huhn, Katrin

    2016-04-01

    The entrainment of single grains and, hence, their erosion characteristics are dependent on fluid forcing, grain size and density, but also shape variations. To quantitatively describe and capture the hydrodynamic conditions around individual grains, researchers commonly use empirical approaches such as laboratory flume tanks. Nonetheless, it is difficult with such physical experiments to measure the flow velocities in the direct vicinity or within the pore spaces of sediments, at a sufficient resolution and in a non-invasive way. As a result, the hydrodynamic conditions in the water column, at the fluid-porous interface and within pore spaces of a granular medium of various grain shapes is not yet fully understood. For that reason, there is a strong need for numerical models, since these are capable of quantifying fluid speeds within a granular medium. A 3D-SPH (Smooth Particle Hydrodynamics) numerical wave tank model was set up to provide quantitative evidence on the flow velocities in the direct vicinity and in the interior of granular beds composed of two shapes as a complementary method to the difficult task of in situ measurement. On the basis of previous successful numerical wave tank models with SPH, the model geometry was chosen in dimensions of X=2.68 [m], Y=0.48 [m], and Z=0.8 [m]. Three suites of experiments were designed with a range of particle shape models: (1) ellipsoids with the long axis oriented in the across-stream direction, (2) ellipsoids with the long axis oriented in the along-stream direction, and (3) spheres. Particle diameters ranged from 0.04 [m] to 0.08 [m]. A wave was introduced by a vertical paddle that accelerated to 0.8 [m/s] perpendicular to the granular bed. Flow measurements showed that the flow velocity values into the beds were highest when the grains were oriented across the stream direction and lowest in case when the grains were oriented parallel to the stream, indicating that the model was capable to simulate simultaneously

  13. A multilayer shallow model for dry granular flows with the $\\mu(I)$ rheology: Application to granular collapse on erodible beds

    CERN Document Server

    Fernández-Nieto, Enrique D; Mangeney, Anne; Narbona-Reina, Gladys

    2015-01-01

    In this work we present a multilayer shallow model to approximate the Navier-Stokes equations with hydrostatic pressure and the $\\mu(I)$-rheology. The main advantages of this approximation are (i) the low cost associated with the numerical treatment of the free surface of the modelled flows, (ii) exact conservation of mass and (iii) the ability to compute 3D profiles of the velocities in the directions along and normal to the slope. The derivation of the model follows [14] and introduces a dimensional analysis based on the shallow flow hypothesis. The proposed first order multilayer model fully satisfies a dissipative energy equation. A comparison with an analytical solution with a non-constant normal profile of the downslope velocity demonstrates the accuracy of the numerical model. Finally, by comparing the numerical results with experimental data, we show that the proposed multilayer model with the $\\mu(I)$-rheology reproduces qualitatively the effect of the erodible bed on granular flow dynamics and depos...

  14. Algorithm for direct numerical simulation of emulsion flow through a granular material

    Science.gov (United States)

    Zinchenko, Alexander Z.; Davis, Robert H.

    2008-08-01

    A multipole-accelerated 3D boundary-integral algorithm capable of modelling an emulsion flow through a granular material by direct multiparticle-multidrop simulations in a periodic box is developed and tested. The particles form a random arrangement at high volume fraction rigidly held in space (including the case of an equilibrium packing in mechanical contact). Deformable drops (with non-deformed diameter comparable with the particle size) squeeze between the particles under a specified average pressure gradient. The algorithm includes recent boundary-integral desingularization tools especially important for drop-solid and drop-drop interactions, the Hebeker representation for solid particle contributions, and unstructured surface triangulations with fixed topology. Multipole acceleration, with two levels of mesh node decomposition (entire drop/solid surfaces and "patches"), is a significant improvement over schemes used in previous, purely multidrop simulations; it remains efficient at very high resolutions ( 104- 105 triangular elements per surface) and has no lower limitation on the number of particles or drops. Such resolutions are necessary in the problem to alleviate lubrication difficulties, especially for near-critical squeezing conditions, as well as using ˜104 time steps and an iterative solution at each step, both for contrast and matching viscosities. Examples are shown for squeezing of 25-40 drops through an array of 9-14 solids, with the total volume fraction of 70% for particles and drops. The flow rates for the drop and continuous phases are calculated. Extensive convergence testing with respect to program parameters (triangulation, multipole truncation, etc.) is made.

  15. Review of diagnostic tools to investigate the physical state of rapid granular filters

    DEFF Research Database (Denmark)

    Lopato, Laure Rose; Binning, Philip John; Arvin, Erik

    2012-01-01

    of the art tools and tools currently in development or conception stage. The development status, usability and availability of each tool and procedure are discussed. Some conventional, simple and low-tech tools are available which can rapidly provide both qualitative and quantitative information. However...

  16. Meandering instability of air flow in a granular bed: self-similarity and fluid-solid duality

    Science.gov (United States)

    Yoshimura, Yuki; Yagisawa, Yui; Okumura, Ko

    2016-12-01

    Meandering instability is familiar to everyone through river meandering or small rivulets of rain flowing down a windshield. However, its physical understanding is still premature, although it could inspire researchers in various fields, such as nonlinear science, fluid mechanics and geophysics, to resolve their long-standing problems. Here, we perform a small-scale experiment in which air flow is created in a thin granular bed to successfully find a meandering regime, together with other remarkable fluidized regimes, such as a turbulent regime. We discover that phase diagrams of the flow regimes for different types of grains can be universally presented as functions of the flow rate and the granular-bed thickness when the two quantities are properly renormalized. We further reveal that the meandering shapes are self-similar as was shown for meandering rivers. The experimental findings are explained by theory, with elucidating the physics. The theory is based on force balance, a minimum-dissipation principle, and a linear-instability analysis of a continuum equation that takes into account the fluid-solid duality, i.e., the existence of fluidized and solidified regions of grains along the meandering path. The present results provide fruitful links to related issues in various fields, including fluidized bed reactors in industry.

  17. Stratification of size-bidisperse granular mixtures in a quasi-2D bounded heap with periodic flow modulation

    Science.gov (United States)

    Xiao, Hongyi; Deng, Zhekai; Umbanhowar, Paul; Ottino, Julio; Lueptow, Richard

    2016-11-01

    Segregation of disperse granular materials in unsteady flows is ubiquitous in nature and industry, yet remains largely unexplored. In this study, unsteady flows are generated by feeding size-bidisperse granular mixtures onto a quasi-2D bounded heap using alternating feed rates, which results in stratified layers of large and small particles. The mechanism of stratification is investigated in detail using Discrete Element Method (DEM) simulations of the flow. During the transition from the slow to the fast feed rate, a segregating wedge propagates downstream and forms a large particle layer extending upstream. During the opposite transition, upstream segregated small particles relax downstream and form a small particle layer extending downstream. The transient kinematics from DEM simulations are quantified and used to inform a time-dependent continuum model that captures the interplay of advection, diffusion, and segregation in the flowing layer. The continuum model reproduces the principle characteristics of the stratification patterns observed in experiments and simulations. Funded by NSF Grant CBET-1511450.

  18. Granular computing: perspectives and challenges.

    Science.gov (United States)

    Yao, JingTao; Vasilakos, Athanasios V; Pedrycz, Witold

    2013-12-01

    Granular computing, as a new and rapidly growing paradigm of information processing, has attracted many researchers and practitioners. Granular computing is an umbrella term to cover any theories, methodologies, techniques, and tools that make use of information granules in complex problem solving. The aim of this paper is to review foundations and schools of research and to elaborate on current developments in granular computing research. We first review some basic notions of granular computing. Classification and descriptions of various schools of research in granular computing are given. We also present and identify some research directions in granular computing.

  19. Improving Efficiency of a Counter-Current Flow Moving Bed Granular Filter

    Energy Technology Data Exchange (ETDEWEB)

    Colver, G.M.; Brown, R.C.; Shi, H.; Soo, D.S-C.

    2002-09-18

    The goal of this research is to improve the performance of moving bed granular filters for gas cleaning at high temperatures and pressures. A second goal of the research is to optimize the performances of both solids and gas filtering processes through appropriate use of granular bed materials, particle sizes, feed rates etc. in a factorial study. These goals are directed toward applications of advanced coal-fired power cycles under development by the U.S. Department of Energy including pressurized fluidized bed combustion and integrated gasification/combined cycles based on gas turbines and fuel cells. Only results for particulate gas cleaning are reported here.

  20. The rapid generation of isothiocyanates in flow

    Directory of Open Access Journals (Sweden)

    Marcus Baumann

    2013-08-01

    Full Text Available Isothiocyanates are versatile starting materials for a wide range of chemical reactions. However, their high nucleophilic susceptibility means they are best prepared and used immediately. We report here on a flow platform for the fast and efficient formation of isothiocyanates by the direct conversion of easily prepared chloroximes. To expedite this chemistry a flow insert cartridge containing two immobilised reagents is used to affect the chemical transformation which typically eliminates the requirements for any conventional work-up or purification of the reaction stream.

  1. Connecting grain-scale physics to macroscopic granular flow behavior using discrete contact-dynamics simulations, centrifuge experiments, and continuum modeling

    Science.gov (United States)

    Reitz, Meredith; Stark, Colin; Hung, Chi-Yao; Smith, Breannan; Grinspin, Eitan; Capart, Herve; Li, Liming; Crone, Timothy; Hsu, Leslie; Ling, Hoe

    2014-05-01

    A complete theoretical understanding of geophysical granular flow is essential to the reliable assessment of landslide and debris flow hazard and for the design of mitigation strategies, but several key challenges remain. Perhaps the most basic is a general treatment of the processes of internal energy dissipation, which dictate the runout velocity and the shape and scale of the affected area. Currently, dissipation is best described by macroscopic, empirical friction coefficients only indirectly related to the grain-scale physics. Another challenge is describing the forces exerted at the boundaries of the flow, which dictate the entrainment of further debris and the erosion of cohesive surfaces. While the granular effects on these boundary forces have been shown to be large compared to predictions from continuum approximations, the link between granular effects and erosion or entrainment rates has not been settled. Here we present preliminary results of a multi-disciplinary study aimed at improving our understanding of granular flow energy dissipation and boundary forces, through an effort to connect grain-scale physics to macroscopic behaviors. Insights into grain-scale force distributions and energy dissipation mechanisms are derived from discrete contact-dynamics simulations. Macroscopic erosion and flow behaviors are documented from a series of granular flow experiments, in which a rotating drum half-filled with grains is placed within a centrifuge payload, in order to drive effective gravity levels up to ~100g and approach the forces present in natural systems. A continuum equation is used to characterize the flowing layer depth and velocity resulting from the force balance between the down-slope pull of gravity and the friction at the walls. In this presentation we will focus on the effect of granular-specific physics such as force chain networks and grain-grain collisions, derived from the contact dynamics simulations. We will describe our efforts to

  2. Flow of variably fluidized granular masses across three-dimensional terrain 2. Numerical predictions and experimental tests

    Science.gov (United States)

    Denlinger, R.P.; Iverson, R.M.

    2001-01-01

    Numerical solutions of the equations describing flow of variably fluidized Coulomb mixtures predict key features of dry granular avalanches and water-saturated debris flows measured in physical experiments. These features include time-dependent speeds, depths, and widths of flows as well as the geometry of resulting deposits. Threedimensional (3-D) boundary surfaces strongly influence flow dynamics because transverse shearing and cross-stream momentum transport occur where topography obstructs or redirects motion. Consequent energy dissipation can cause local deceleration and deposition, even on steep slopes. Velocities of surge fronts and other discontinuities that develop as flows cross 3-D terrain are predicted accurately by using a Riemann solution algorithm. The algorithm employs a gravity wave speed that accounts for different intensities of lateral stress transfer in regions of extending and compressing flow and in regions with different degrees of fluidization. Field observations and experiments indicate that flows in which fluid plays a significant role typically have high-friction margins with weaker interiors partly fluidized by pore pressure. Interaction of the strong perimeter and weak interior produces relatively steep-sided, flat-topped deposits. To simulate these effects, we compute pore pressure distributions using an advection-diffusion model with enhanced diffusivity near flow margins. Although challenges remain in evaluating pore pressure distributions in diverse geophysical flows, Riemann solutions of the depthaveraged 3-D Coulomb mixture equations provide a powerful tool for interpreting and predicting flow behavior. They provide a means of modeling debris flows, rock avalanches, pyroclastic flows, and related phenomena without invoking and calibrating Theological parameters that have questionable physical significance.

  3. Rapid expulsion of microswimmers by a vortical flow.

    Science.gov (United States)

    Sokolov, Andrey; Aranson, Igor S

    2016-03-23

    Interactions of microswimmers with their fluid environment are exceptionally complex. Macroscopic shear flow alters swimming trajectories in a highly nontrivial way and results in dramatic reduction of viscosity and heterogeneous bacterial distributions. Here we report on experimental and theoretical studies of rapid expulsion of microswimmers, such as motile bacteria, by a vortical flow created by a rotating microparticle. We observe a formation of a macroscopic depletion area in a high-shear region, in the vicinity of a microparticle. The rapid migration of bacteria from the shear-rich area is caused by a vortical structure of the flow rather than intrinsic random fluctuations of bacteria orientations, in stark contrast to planar shear flow. Our mathematical model reveals that expulsion is a combined effect of motility and alignment by a vortical flow. Our findings offer a novel approach for manipulation of motile microorganisms and shed light on bacteria-flow interactions.

  4. Rapid expulsion of microswimmers by a vortical flow

    Science.gov (United States)

    Sokolov, Andrey; Aranson, Igor S.

    2016-01-01

    Interactions of microswimmers with their fluid environment are exceptionally complex. Macroscopic shear flow alters swimming trajectories in a highly nontrivial way and results in dramatic reduction of viscosity and heterogeneous bacterial distributions. Here we report on experimental and theoretical studies of rapid expulsion of microswimmers, such as motile bacteria, by a vortical flow created by a rotating microparticle. We observe a formation of a macroscopic depletion area in a high-shear region, in the vicinity of a microparticle. The rapid migration of bacteria from the shear-rich area is caused by a vortical structure of the flow rather than intrinsic random fluctuations of bacteria orientations, in stark contrast to planar shear flow. Our mathematical model reveals that expulsion is a combined effect of motility and alignment by a vortical flow. Our findings offer a novel approach for manipulation of motile microorganisms and shed light on bacteria–flow interactions. PMID:27005581

  5. Steady-state granular flow in a three-dimensional cylindrical hopper with flat bottom: microscopic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, H P; Yu, A B [Centre for Simulation and Modeling of Particulate Systems, School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052 (Australia)

    2004-05-21

    Granular flow in a cylindrical hopper with flat bottom is investigated based on the results generated by the discrete element method. The dependence of flow behaviour on the geometric and physical parameters of the hopper and particles, such as the orifice size and wall roughness of hoppers, and frictional and damping coefficients between particles, is analysed to establish the spatial and statistical distributions of microdynamic variables related to flow and force structures such as velocity, porosity, coordination number, and interaction forces between particles and between particles and walls. It is shown from the velocity field that there are four different zones in the hopper flow: a stagnant zone, a plug flow zone, a converging flow zone, and a transition zone from plug flow to converging flow. The Beverloo equation can describe the relationship between discharge rate and orifice size; however, the constants in the equation may vary with the wall friction coefficient, particle friction and damping coefficients. The flow and force structures of particles in the hopper are spatially non-uniform. In particular, porosity is high in the region near the orifice and low in the upper part and around the bottom corner of the hopper, whilst the coordination number has an opposite distribution. Large contact forces are experienced by particles around the bottom corner whereas small forces are experienced by particles in the upper part and the region near the orifice. However, there is a region above the orifice where particles experience the maximum total interaction forces between particles; the forces gradually propagate from this region into the bed and have a minimum value in the central upper part. The velocity distribution, flow and force structures are affected by the geometric and physical parameters of the hopper and particles.

  6. Shear flow of dense granular materials near smooth walls. I. Shear localization and constitutive laws in the boundary region.

    Science.gov (United States)

    Shojaaee, Zahra; Roux, Jean-Noël; Chevoir, François; Wolf, Dietrich E

    2012-07-01

    We report on a numerical study of the shear flow of a simple two-dimensional model of a granular material under controlled normal stress between two parallel smooth frictional walls moving with opposite velocities ± V. Discrete simulations, which are carried out with the contact dynamics method in dense assemblies of disks, reveal that, unlike rough walls made of strands of particles, smooth ones can lead to shear strain localization in the boundary layer. Specifically, we observe, for decreasing V, first a fluidlike regime (A), in which the whole granular layer is sheared, with a homogeneous strain rate except near the walls, then (B) a symmetric velocity profile with a solid block in the middle and strain localized near the walls, and finally (C) a state with broken symmetry in which the shear rate is confined to one boundary layer, while the bulk of the material moves together with the opposite wall. Both transitions are independent of system size and occur for specific values of V. Transient times are discussed. We show that the first transition, between regimes A and B, can be deduced from constitutive laws identified for the bulk material and the boundary layer, while the second one could be associated with an instability in the behavior of the boundary layer. The boundary zone constitutive law, however, is observed to depend on the state of the bulk material nearby.

  7. Hydrodynamic modeling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics

    NARCIS (Netherlands)

    Goldschmidt, M.J.V.; Kuipers, J.A.M.; van Swaaij, Willibrordus Petrus Maria

    2000-01-01

    A two-dimensional multi-fluid Eulerian CFD model with closure laws according to the kinetic theory of granular flow has been applied to study the influence of the coefficient of restitution on the hydrodynamics of dense gas-fluidised beds. It is demonstrated that hydrodynamics of dense gas-fluidised

  8. Hydrodynamic modeling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics.

    NARCIS (Netherlands)

    Goldschmidt, M.J.V.; Kuipers, J.A.M.; van Swaaij, Willibrordus Petrus Maria

    2001-01-01

    A two-dimensional multi-fluid Eulerian CFD model with closure laws according to the kinetic theory of granular flow has been applied to study the influence of the coefficient of restitution on the hydrodynamics of dense gas-fluidised beds. It is demonstrated that hydrodynamics of dense gas-fluidised

  9. Hydrodynamic modeling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics

    NARCIS (Netherlands)

    Goldschmidt, M.J.V.; Kuipers, J.A.M.; Swaaij, van W.P.M.

    2000-01-01

    A two-dimensional multi-fluid Eulerian CFD model with closure laws according to the kinetic theory of granular flow has been applied to study the influence of the coefficient of restitution on the hydrodynamics of dense gas-fluidised beds. It is demonstrated that hydrodynamics of dense gas-fluidised

  10. Hydrodynamic modelling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics.

    NARCIS (Netherlands)

    Goldschmidt, M.J.V.; Kuipers, J.A.M.; Swaaij, van W.P.M.

    2001-01-01

    A two-dimensional multi-fluid Eulerian CFD model with closure laws according to the kinetic theory of granular flow has been applied to study the influence of the coefficient of restitution on the hydrodynamics of dense gas-fluidised beds. It is demonstrated that hydrodynamics of dense gas-fluidised

  11. Computational investigation of the flow field contribution to improve electricity generation in granular activated carbon-assisted microbial fuel cells

    Science.gov (United States)

    Zhao, Lei; Li, Jian; Battaglia, Francine; He, Zhen

    2016-11-01

    Microbial fuel cells (MFCs) offer an alternative approach to treat wastewater with less energy input and direct electricity generation. To optimize MFC anodic performance, adding granular activated carbon (GAC) has been proved to be an effective way, most likely due to the enlarged electrode surface for biomass attachment and improved mixing of the flow field. The impact of a flow field on the current enhancement within a porous anode medium (e.g., GAC) has not been well understood before, and thus is investigated in this study by using mathematical modeling of the multi-order Butler-Volmer equation with computational fluid dynamics (CFD) techniques. By comparing three different CFD cases (without GAC, with GAC as a nonreactive porous medium, and with GAC as a reactive porous medium), it is demonstrated that adding GAC contributes to a uniform flow field and a total current enhancement of 17%, a factor that cannot be neglected in MFC design. However, in an actual MFC operation, this percentage could be even higher because of the microbial competition and energy loss issues within a porous medium. The results of the present study are expected to help with formulating strategies to optimize MFC with a better flow pattern design.

  12. Hydraulic bridges in unsaturated coarse granular media: Influence of bridge size and conductivity on flow through clasts

    Science.gov (United States)

    Jayakody, Jeevan A.; Nicholl, Michael J.

    2016-10-01

    Unsaturated flow in coarse granular media must pass through hydraulic bridges (e.g., pendular water, porous connections) that form a physical connection between adjoining clasts. Previous studies suggest that volumetric flow through a porous clast (Q) will be linearly dependent on the cross-sectional area of the hydraulic bridges, and understate the importance of bridge conductivity. Numerical simulations were performed to explore steady-state flow through a spherical clast with identical bridges located at the top and bottom. The cross-sectional area of the bridges relative to that of the clast (Ar) was varied across six orders of magnitude. The ratio of hydraulic conductivity between bridges and clasts (Kb/Kc) was varied across 12 orders of magnitude to consider resistive, neutral, and conductive bridges. Results show that hydraulic bridges place a primary control on both Q and flux distribution within the clast. For neutral and conductive bridges (Kb/Kc ≥1), Ar is the dominant factor in determining Q, while Kb/Kc is the primary control for resistive bridges (Kb/Kc < 1). For all bridges, Q shows a non-linear dependency on both Ar and Kb/Kc. The intra-clast flow distribution shifts outwards as Ar increases. Conductive bridges promote this process and resistive bridges impede it.

  13. Enhanced desalination performance of membrane capacitive deionization cells by packing the flow chamber with granular activated carbon.

    Science.gov (United States)

    Bian, Yanhong; Yang, Xufei; Liang, Peng; Jiang, Yong; Zhang, Changyong; Huang, Xia

    2015-11-15

    A new design of membrane capacitive deionization (MCDI) cell was constructed by packing the cell's flow chamber with granular activated carbon (GAC). The GAC packed-MCDI (GAC-MCDI) delivered higher (1.2-2.5 times) desalination rates than the regular MCDI at all test NaCl concentrations (∼ 100-1000 mg/L). The greatest performance enhancement by packed GAC was observed when treating saline water with an initial NaCl concentration of 100 mg/L. Several different GAC materials were tested and they all exhibited similar enhancement effects. Comparatively, packing the MCDI's flow chamber with glass beads (GB; non-conductive) and graphite granules (GG; conductive but with lower specific surface area than GAC) resulted in inferior desalination performance. Electrochemical impedance spectroscopy (EIS) analysis showed that the GAC-MCDI had considerably smaller internal resistance than the regular MCDI (∼ 19.2 ± 1.2 Ω versus ∼ 1222 ± 15 Ω at 100 mg/L NaCl). The packed GAC also decreased the ionic resistance across the flow chamber (∼ 1.49 ± 0.05 Ω versus ∼ 1130 ± 12 Ω at 100 mg/L NaCl). The electric double layer (EDL) formed on the GAC surface was considered to store salt ions during electrosorption, and facilitate the ion transport in the flow chamber because of the higher ion conductivity in the EDLs than in the bulk solution, thereby enhancing the MCDI's desalination rate.

  14. A Study in Three-Dimensional Chaotic Dynamics: Granular Flow and Transport in a Bi-Axial Spherical Tumbler

    CERN Document Server

    Christov, Ivan C; Ottino, Julio M; Sturman, Rob

    2014-01-01

    We study 3D chaotic dynamics through an analysis of transport in a granular flow in a half-full spherical tumbler rotated sequentially about two orthogonal axes (a bi-axial "blinking" tumbler). The flow is essentially quasi-2D in any vertical slice of the sphere during rotation about a single axis, and we provide an explicit exact solution to the model in this case. Hence, the cross-sectional flow can be represented by a twist map, allowing us to express the 3D flow as a linked twist map (LTM). We prove that if the rates of rotation about each axis are equal, then (in the absence of stochasticity) particle trajectories are restricted to 2D surfaces consisting of a portion of a hemispherical shell closed by a "cap"; if the rotation rates are unequal, then particles can leave the surface they start on and traverse a volume of the tumbler. The period-one structures of the governing LTM are examined in detail: analytical expressions are provided for the location of period-one curves, their extent into the bulk of...

  15. Scalar conservation laws with nonconstant coefficients with application to particle size segregation in granular flow

    CERN Document Server

    May, Lindsay B H; Daniels, Karen E

    2010-01-01

    Granular materials will segregate by particle size when subjected to shear, as occurs, for example, in avalanches. The evolution of a bidisperse mixture of particles can be modeled by a nonlinear first order partial differential equation, provided the shear (or velocity) is a known function of position. While avalanche-driven shear is approximately uniform in depth, boundary-driven shear typically creates a shear band with a nonlinear velocity profile. In this paper, we measure a velocity profile from experimental data and solve initial value problems that mimic the segregation observed in the experiment, thereby verifying the value of the continuum model. To simplify the analysis, we consider only one-dimensional configurations, in which a layer of small particles is placed above a layer of large particles within an annular shear cell and is sheared for arbitrarily long times. We fit the measured velocity profile to both an exponential function of depth and a piecewise linear function which separates the she...

  16. Torsional shear flow of granular materials: shear localization and minimum energy principle

    Science.gov (United States)

    Artoni, Riccardo; Richard, Patrick

    2016-10-01

    The rheological properties of granular matter submitted to torsional shear are investigated numerically by means of discrete element method. The shear cell is made of a cylinder filled by grains which are sheared by a bumpy bottom and submitted to a vertical pressure which is applied at the top. Regimes differing by their strain localization features are observed. They originate from the competition between dissipation at the sidewalls and dissipation in the bulk of the system. The effects of the (i) the applied pressure, (ii) sidewall friction, and (iii) angular velocity are investigated. A model, based on the purely local μ (I) -rheology and a minimum energy principle is able to capture the effect of the two former quantities but unable to account the effect of the latter. Although, an ad hoc modification of the model allows to reproduce all the numerical results, our results point out the need for an alternative rheology.

  17. Two-dimensional simulation by regularization of free surface viscoplastic flows with Drucker-Prager yield stress and application to granular collapse

    Science.gov (United States)

    Lusso, Christelle; Ern, Alexandre; Bouchut, François; Mangeney, Anne; Farin, Maxime; Roche, Olivier

    2017-03-01

    This work is devoted to numerical modeling and simulation of granular flows relevant to geophysical flows such as avalanches and debris flows. We consider an incompressible viscoplastic fluid, described by a rheology with pressure-dependent yield stress, in a 2D setting with a free surface. We implement a regularization method to deal with the singularity of the rheological law, using a mixed finite element approximation of the momentum and incompressibility equations, and an arbitrary Lagrangian Eulerian (ALE) formulation for the displacement of the domain. The free surface is evolved by taking care of its deposition onto the bottom and of preventing it from folding over itself. Several tests are performed to assess the efficiency of our method. The first test is dedicated to verify its accuracy and cost on a one-dimensional simple shear plug flow. On this configuration we setup rules for the choice of the numerical parameters. The second test aims to compare the results of our numerical method to those predicted by an augmented Lagrangian formulation in the case of the collapse and spreading of a granular column over a horizontal rigid bed. Finally we show the reliability of our method by comparing numerical predictions to data from experiments of granular collapse of both trapezoidal and rectangular columns over horizontal rigid or erodible granular bed made of the same material. We compare the evolution of the free surface, the velocity profiles, and the static-flowing interface. The results show the ability of our method to deal numerically with the front behavior of granular collapses over an erodible bed.

  18. Preliminary study on aerobic granular biomass formation with aerobic continuous flow reactor

    Science.gov (United States)

    Yulianto, Andik; Soewondo, Prayatni; Handajani, Marissa; Ariesyady, Herto Dwi

    2017-03-01

    A paradigm shift in waste processing is done to obtain additional benefits from treated wastewater. By using the appropriate processing, wastewater can be turned into a resource. The use of aerobic granular biomass (AGB) can be used for such purposes, particularly for the processing of nutrients in wastewater. During this time, the use of AGB for processing nutrients more reactors based on a Sequencing Batch Reactor (SBR). Studies on the use of SBR Reactor for AGB demonstrate satisfactory performance in both formation and use. SBR reactor with AGB also has been applied on a full scale. However, the use use of SBR reactor still posses some problems, such as the need for additional buffer tank and the change of operation mode from conventional activated sludge to SBR. This gives room for further reactor research with the use of a different type, one of which is a continuous reactor. The purpose of this study is to compare AGB formation using continuous reactor and SBR with same operation parameter. Operation parameter are Organic Loading Rate (OLR) set to 2,5 Kg COD/m3.day with acetate as substrate, aeration rate 3 L/min, and microorganism from Hospital WWTP as microbial source. SBR use two column reactor with volumes 2 m3, and continuous reactor uses continuous airlift reactor, with two compartments and working volume of 5 L. Results from preliminary research shows that although the optimum results are not yet obtained, AGB can be formed on the continuous reactor. When compared with AGB generated by SBR, then the characteristics of granular diameter showed similarities, while the sedimentation rate and Sludge Volume Index (SVI) characteristics showed lower yields.

  19. Direct numerical simulation of granular flows with fluid; Simulation numerique directe d'ecoulements granulaires en presence de fluide

    Energy Technology Data Exchange (ETDEWEB)

    Komiwes, V.

    1999-09-01

    Numerical models applied to simulation of granular flow with fluid are developed. The physical model selected to describe particles flow is a discrete approach. Particle trajectories are calculated by the Newton law and collision is describe by a soft-sphere approach. The fluid flow is modelled by Navier-Stokes equations. The modelling of the momentum transfer depends on the resolution scale: for a scale of the order of the particle diameter, it is modelled by a drag-law and for a scale smaller than the particle diameter, it is directly calculated by stress tensor computation around particles. The direct model is used to find representative elementary volume and prove the local character of the Ergun's law. This application shows the numerical (mesh size), physical (Reynolds number) and computational (CPU time and memory consumptions) limitations. The drag law model and the direct model are validated with analytical and empirical solutions and compared. For the two models, the CPU time and the memory consumptions are discussed. The drag law model is applied to the simulation of gas-solid dense fluidized-beds. In the case of uniform gas distribution, the fluidized-bed simulation heights are compared to experimental data for particle of group A and B of the Geldart classification. (author)

  20. Liquefaction of a Horizontally Vibrated Granular Bed Friction, Dilation and Segregation

    CERN Document Server

    Tennakoon, S G K; Tennakoon, Sarath G.

    1997-01-01

    We present experimental observations of the onset of flow (liquefaction) for horizontally vibrated granular materials. As the acceleration increases above certain value, the top layer of granular material liquefies, while the remainder of the layer moves with the shaker in solid body motion. With increasing acceleration, more of the layer becomes fluidized. The initial bifurcation is backward, and the amount of hysteresis depends mainly on frictional properties of the granular media. A small amount of fluidization by gas flow lifts the hysteresis. Modest differences in the frictional properties of otherwise identical particles leads to rapid segregation.

  1. Influence of auroral streamers on rapid evolution of SAPS flows

    Science.gov (United States)

    Gallardo-Lacourt, B.; Nishimura, T.; Lyons, L. R.; Ruohoniemi, J. M.; Donovan, E.; Angelopoulos, V.; Nishitani, N.

    2015-12-01

    An important manifestation of plasma transport in the ionosphere is Subauroral Polarization Streams or SAPS, which are strong westward flow lying just equatorward of the electron auroral oval and thus of enhanced ionospheric conductivities of the auroral oval. While SAPS are known to intensify due to substorm injections, recent studies showed that large variability of SAPS flow can occur well after substorm onset and even during non-substorm times. These SAPS enhancements have been suggested to occur in association with auroral streamers that propagate equatorward, a suggestion that would indicate that plasma sheet fast flows propagate into the inner magnetosphere and increase subauroral flows. We present auroral images from the THEMIS ground-based all-sky-imager array and 2-d line-of-sight flow observations from the SuperDARN radars that share fields of view with the imagers to investigate systematically the association between SAPS and auroral streamers. We surveyed events from December 2007 to April 2013 for which high or mid-latitude SuperDARN radars were available to measure the SAPS flows, and identified 60 events. For streamers observed near the equatorward boundary of the auroral oval, we find westward flow enhancements of ~200 m/s slightly equatorward of the streamers. A preliminary survey suggests that >90% of the streamers that reach close to the equatorward boundary lead to westward flow enhancements. We also characterize the SAPS flow channel width and timing relative to streamers reaching radar echo meridians. The strong influence of auroral streamers on rapid SAPS flow evolution suggests that transient fast earthward plasma sheet flows can lead to westward SAPS flow enhancements in the subauroral region, and that such enhancements are far more common than only during substorms because of the frequent occurrences of streamers under various geomagnetic conditions.

  2. On Non-Stationary One-Dimensional Porous Flow in Coarse Granular Materials

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Christensen, Claus

    Traditionally the hydrodynamic response of rubble mound structures are studied in physical models scaled according to the Froude scaling law which neglects viscous forces. This introduces scale effect because the inherent length scaling of the stone diameters creates laminar flow in the regions...... which in prototypes are dominated by turbulent flow. Numerical modelling of the flow do not have this draw back and is therefore attractive....

  3. On Stationary and Non-stationary Porous Flow in Coarse Granular Materials

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Christensen, Claus

    Traditionally the hydrodynamic response of rubble mound structures are studied in physical models scaled according to the Froude scaling law which neglects viscous forces. This introduces scale effect because the inherent length scaling of the stone diameters creates laminar flow in the regions...... which in prototypes are dominated by turbulent flow. Numerical modelling of the flow do not have this draw back and is therefore attractive....

  4. Formation and mechanics of granular waves in gravity and shallow overland flow

    Science.gov (United States)

    Sediment transport in overland flow is a highly complex process involving many properties relative to the flow regime characteristics, soil surface conditions, and type of sediment. From a practical standpoint, most sediment transport studies are concerned with developing relationships of rates of s...

  5. Granular Computing

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    The basic ideas and principles of granular computing (GrC) have been studied explicitly or implicitly in many fields in isolation. With the recent renewed and fast growing interest, it is time to extract the commonality from a diversity of fields and to study systematically and formally the domain independent principles of granular computing in a unified model. A framework of granular computing can be established by applying its own principles. We examine such a framework from two perspectives,granular computing as structured thinking and structured problem solving. From the philosophical perspective or the conceptual level,granular computing focuses on structured thinking based on multiple levels of granularity. The implementation of such a philosophy in the application level deals with structured problem solving.

  6. Genesis and mechanism of rainfall-induced hyperconcentrated flows in granular soils

    OpenAIRE

    Della Sala, Maria

    2014-01-01

    2012-2013 Heavy rainfall on steep hillslopes may cause either shallow landslides or soil superficial erosion and different flow-type phenomena may originate in adjacent/overlapping source areas. Consequently, great amount of water and debris can be conveyed at the outlet of steep mountain basins where huge consequences are often registered. Recent studies outline that first-time shallow slides may turn into debris flows or debris avalanches; conversely, slope instabilities initiated by ...

  7. Mathematical models of granular matter

    CERN Document Server

    Mariano, Paolo; Giovine, Pasquale

    2008-01-01

    Granular matter displays a variety of peculiarities that distinguish it from other appearances studied in condensed matter physics and renders its overall mathematical modelling somewhat arduous. Prominent directions in the modelling granular flows are analyzed from various points of view. Foundational issues, numerical schemes and experimental results are discussed. The volume furnishes a rather complete overview of the current research trends in the mechanics of granular matter. Various chapters introduce the reader to different points of view and related techniques. New models describing granular bodies as complex bodies are presented. Results on the analysis of the inelastic Boltzmann equations are collected in different chapters. Gallavotti-Cohen symmetry is also discussed.

  8. Memory of jamming – multiscale flow in soft and granular matter

    NARCIS (Netherlands)

    Kumar, Nishant; Luding, Stefan

    2015-01-01

    Soft, disordered, micro-structured materials are ubiquitous in nature and industry, and are different from ordinary fluids or solids, with unusual, interesting static and flow properties. The transition from fluid to solid - at the so-called jamming density - features a multitude of complex mechanis

  9. Simulating the DISAMATIC process using the discrete element method — a dynamical study of granular flow

    DEFF Research Database (Denmark)

    Hovad, Emil; Spangenberg, Jon; Larsen, P.

    2016-01-01

    The discrete element method (DEM) is applied to simulate the dynamics of the flow of green sand while filling a mould using the DISAMATIC process. The focus is to identify relevant physical experiments that can be used to characterize the material properties of green sand in the numerical model...

  10. Experimental study of monodisperse granular flow through an inclined rotating chute

    NARCIS (Netherlands)

    Shirsath, S.S.; Padding, J.T.; Deen, N.G.; Clercx, H.J.H.; Kuipers, J.A.M.

    2013-01-01

    In blast furnaces, particles like coke, sinter and pellets enter from a hopper and are distributed on the burden surface by a rotating chute. Such particulate flows suffer occasionally from particle segregation during transportation caused by differences in density or size. To get a more fundamental

  11. Numerical investigation of monodisperse granular flow through an inclined rotating chute

    NARCIS (Netherlands)

    Shirsath, Sushil S.; Padding, Johan T.; Kuipers, J.A.M. (Hans); Peeters, Tim W.J.; Clercx, Herman J.H.

    2014-01-01

    A discrete element model of spherical glass particles flowing down a rotating chute is validated against high quality experimental data. The simulations are performed in a corotating frame of reference, taking into account Coriolis and centrifugal forces. In view of future extensions aimed at segreg

  12. Stable aerobic granules for continuous-flow reactors: Precipitating calcium and iron salts in granular interiors.

    Science.gov (United States)

    Juang, Yu-Chuan; Sunil S, Adav; Lee, Duu-Jong; Tay, Joo-Hwa

    2010-11-01

    Aerobic sludge granules are compact, strong microbial aggregates that have excellent settling ability and capability to efficiently treat high-strength and toxic wastewaters. The aerobic granules cultivated with low ammonium and phosphates lost structural stability within 3 days in continuous-flow reactors. Conversely, stable aerobic granules were cultivated in substrate with high levels of ammonium salts that could stably exist for 216 days in continuous-flow reactors with or without submerged membrane. The scanning electron microscopy, energy dispersive spectroscopy microanalysis and the confocal laser scanning microscopy imaging detected large amounts of calcium and iron precipitates in granule interiors. The Visual MINTEQ version 2.61 calculation showed that the phosphates and hydroxides were the main species in the precipitate.

  13. Experimental investigation of a rapidly rotating turbulent duct flow

    Energy Technology Data Exchange (ETDEWEB)

    Maartensson, G.E.; Johansson, A.V. [Department of Mechanics, KTH, 10044 Stockholm (Sweden); Gunnarsson, J. [Bombardier Transportation, Vaesteraas (Sweden); Moberg, H. [Alfa Laval, 14780 Tumba (Sweden)

    2002-09-01

    Rapidly rotating duct flow is studied experimentally with Rotation numbers in the interval. To achieve this, in combination with relatively high Reynolds numbers (5,000-30,000 based on the hydraulic radius), water was used as the working medium. Square and rectangular duct cross-sections were used and the angle between the rotation vector and the main axis of the duct was varied. The influence of the rotation on the pressure drop in the duct was investigated and suitable scalings of this quantity were studied. (orig.)

  14. High-Fidelity Gas and Granular Flow Physics Models for Rocket Exhaust Interaction with Lunar Soil Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Current modeling of Lunar and Martian soil erosion and debris transport caused by rocket plume impingement lacks essential physics from the peculiar granular...

  15. Development of Soft-Sphere Contact Models for Thermal Heat Conduction in Granular Flows

    Energy Technology Data Exchange (ETDEWEB)

    Morris, A. B.; Pannala, S.; Ma, Zhiwen; Hrenya, C. M.

    2016-12-01

    Conductive heat transfer to flowing particles occurs when two particles (or a particle and wall) come into contact. The direct conduction between the two bodies depends on the collision dynamics, namely the size of the contact area and the duration of contact. For soft-sphere discrete-particle simulations, it is computationally expensive to resolve the true collision time because doing so would require a restrictively small numerical time step. To improve the computational speed, it is common to increase the 'softness' of the material to artificially increase the collision time, but doing so affects the heat transfer. In this work, two physically-based correction terms are derived to compensate for the increased contact area and time stemming from artificial particle softening. By including both correction terms, the impact that artificial softening has on the conductive heat transfer is removed, thus enabling simulations at greatly reduced computational times without sacrificing physical accuracy.

  16. Bipotential continuum models for granular mechanics

    Science.gov (United States)

    Goddard, Joe

    2014-03-01

    Most currently popular continuum models for granular media are special cases of a generalized Maxwell fluid model, which describes the evolution of stress and internal variables such as granular particle fraction and fabric,in terms of imposed strain rate. It is shown how such models can be obtained from two scalar potentials, a standard elastic free energy and a ``dissipation potential'' given rigorously by the mathematical theory of Edelen. This allows for a relatively easy derivation of properly invariant continuum models for granular media and fluid-particle suspensions within a thermodynamically consistent framework. The resulting continuum models encompass all the prominent regimes of granular flow, ranging from the quasi-static to rapidly sheared, and are readily extended to include higher-gradient or Cosserat effects. Models involving stress diffusion, such as that proposed recently by Kamrin and Koval (PRL 108 178301), provide an alternative approach that is mentioned in passing. This paper provides a brief overview of a forthcoming review articles by the speaker (The Princeton Companion to Applied Mathematics, and Appl. Mech. Rev.,in the press, 2013).

  17. Performance evaluation of granular activated carbon system at Pantex: Rapid small-scale column tests to simulate removal of high explosives from contaminated groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Henke, J.L.; Speitel, G.E. [Univ. of Texas, Austin, TX (United States). Dept. of Civil Engineering

    1998-08-01

    A granular activated carbon (GAC) system is now in operation at Pantex to treat groundwater from the perched aquifer that is contaminated with high explosives. The main chemicals of concern are RDX and HMX. The system consists of two GAC columns in series. Each column is charged with 10,000 pounds of Northwestern LB-830 GAC. At the design flow rate of 325 gpm, the hydraulic loading is 6.47 gpm/ft{sup 2}, and the empty bed contact time is 8.2 minutes per column. Currently, the system is operating at less than 10% of its design flow rate, although flow rate increases are expected in the relatively near future. This study had several objectives: Estimate the service life of the GAC now in use at Pantex; Screen several GACs to provide a recommendation on the best GAC for use at Pantex when the current GAC is exhausted and is replaced; Determine the extent to which natural organic matter in the Pantex groundwater fouls GAC adsorption sites, thereby decreasing the adsorption capacity for high explosives; and Determine if computer simulation models could match the experimental results, thereby providing another tool to follow system performance.

  18. Prediction of shear bands in sand based on granular flow model and two-phase equilibrium

    Institute of Scientific and Technical Information of China (English)

    张义同; 齐德瑄; 杜如虚; 任述光

    2008-01-01

    In contrast to the traditional interpretation of shear bands in sand as a bifurcation problem in continuum mechanics,shear bands in sand are considered as high-strain phase(plastic phase) of sand and the materials outside the bands are still in low-strain phase(elastic phase),namely,the two phases of sand can coexist under certain condition.As a one-dimensional example,the results show that,for materials with strain-softening behavior,the two-phase solution is a stable branch of solutions,but the method to find two-phase solutions is very different from the one for bifurcation analysis.The theory of multi-phase equilibrium and the slow plastic flow model are applied to predict the formation and patterns of shear bands in sand specimens,discontinuity of deformation gradient and stress across interfaces between shear bands and other regions is considered,the continuity of displacements and traction across interfaces is imposed,and the Maxwell relation is satisfied.The governing equations are deduced.The critical stress for the formation of a shear band,both the stresses and strains inside the band and outside the band,and the inclination angle of the band can all be predicted.The predicted results are consistent with experimental measurements.

  19. Bacterial floc mediated rapid streamer formation in creeping flows

    CERN Document Server

    Hassanpourfard, Mahtab; Ghosh, Ranajay; Das, Siddhartha; Thundat, Thomas; Liu, Yang; Kumar, Aloke

    2015-01-01

    One of the central puzzles concerning the interaction of low Reynolds number (Re<<1) fluid transport with bacterial biomass is the formation of filamentous structures called streamers. In this manuscript, we report our discovery of a new kind of low Re bacterial streamers, which appear from pre-formed bacterial flocs. In sharp contrast to the biofilm-mediated streamers, these streamers form over extremely small timescales (less than a second). Our experiments, carried out in a microchannel with micropillars rely on fluorescence microscopy techniques to illustrate that floc-mediated streamers form when a freely-moving floc adheres to the micropillar wall and gets rapidly sheared by the background flow. We also show that at their inception the deformation of the flocs is dominated by recoverable large strains indicating significant elasticity. These strains subsequently increase tremendously to produce filamentous streamers. Interestingly, we find that these fully formed streamers are not static structure...

  20. Continuous-Flow Detector for Rapid Pathogen Identification

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Louise M. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Microfluidics; Skulan, Andrew J. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Microfluidics; Singh, Anup K. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Microfluidics; Cummings, Eric B. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Microfluidics; Fiechtner, Gregory J. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Microfluidics

    2006-09-01

    This report describes the continued development of a low-power, portable detector for the rapid identification of pathogens such as B. anthracis and smallpox. Based on our successful demonstration of the continuous filter/concentrator inlet, we believe strongly that the inlet section will enable differentiation between viable and non-viable populations, between types of cells, and between pathogens and background contamination. Selective, continuous focusing of particles in a microstream enables highly selective and sensitive identification using fluorescently labeled antibodies and other receptors such as peptides, aptamers, or small ligands to minimize false positives. Processes such as mixing and lysing will also benefit from the highly localized particle streams. The concentrator is based on faceted prisms to contract microfluidic flows while maintaining uniform flowfields. The resulting interfaces, capable of high throughput, serve as high-, low-, and band-pass filters to direct selected bioparticles to a rapid, affinity-based detection system. The proposed device is superior to existing array-based detectors as antibody-pathogen binding can be accomplished in seconds rather than tens of minutes or even hours. The system is being designed to interface with aerosol collectors under development by the National Laboratories or commercial systems. The focused stream is designed to be interrogated using diode lasers to differentiate pathogens by light scattering. Identification of particles is done using fluorescently labeled antibodies to tag the particles, followed by multiplexed laser-induced fluorescence (LIF) detection (achieved by labeling each antibody with a different dye).

  1. Study on the Mechanisms of Solids Segregation in Granular Debris Flows%泥石流颗粒物质分选机理和效应

    Institute of Scientific and Technical Information of China (English)

    周公旦; 孙其诚; 崔鹏

    2013-01-01

    泥石流是一种由大量固体颗粒和液态水充分掺混所形成的多相流体,泥石流体内固体颗粒物质的相互作用所导致的泥石流颗粒物质的分选是引起泥石流流动性和冲击力大增的重要原因,是现阶段大型泥石流防治的重要关注方向.从基本的泥石流动力学理论出发,采用连续介质力学的方法构建泥石流运动的模型,初步分析颗粒分选对泥石流流动性的影响;进而采用离散元(DEM)数值模拟颗粒流的方法,对泥石流发展过程中颗粒间的作用方式和分选机理开展详尽的研究.研究结果表明:泥石流颗粒分选可以导致颗粒体内部孔隙水压力的重新分布,进而影响到龙头运动速度和颗粒体长度的激增;离散元数值模拟和分析进一步显示,区别于一般均匀颗粒所形成的颗粒流的边界层效应,颗粒分选能够显著地改变颗粒体内部的剪切速率的分布,从而弱化边界层效应.%Debris flow is generally composed of a wide range of solid particles and viscous pore fluid. Interactions between solid particles and the resulted segregation in debris flows are affected by multiple parameters,and usually govern the rheological properties of debris flows and the flow mobility. Through the theoretical analysis,the effect of solids segregation on the flow mobility was demonstrated. Furthermore,granular debris flows with grains of mixed sizes were numerically modelled and the contact behaviour of solid particles was fundamentally studied using the Discrete Element Method (DEM). Compared to granular flows with uniform solid particles,the mechanisms of solids segregation and the effect on granular flow mobility were investigated. The results showed that that segregation can significantly increase the flow velocity of the front head and the length of the granular body on slopes. Due to the solids segregation,the shear rate developed in the granular body is greatly enhanced and no shearing

  2. Mechanics of granular environments; Mecanique des milieux granulaires

    Energy Technology Data Exchange (ETDEWEB)

    Lanier, J. [Universite Joseph-Fourier, Grenoble I, 38 (France)

    2001-07-01

    This book aims at presenting different aspects of the behaviour of granular materials as encountered in natural environments (mainly soils), in industries involving the handling of granular products (cereals..) or powders (chemistry, metal industry..). It brings together the contributions of various specialists of physics and mechanics: mechanics of collisions between solids; gravity flows; grain flows; solid transport as example of two-phase granular flow; wave propagation inside a model of granular environment; propagation of waves in soils; enrockments and stability of rocky slopes; soils behaviour; coupled heat and mass transfers in granular environments; thermo-mechanical properties of granular environments. (J.S.)

  3. Interfacial Instability during Granular Erosion.

    Science.gov (United States)

    Lefebvre, Gautier; Merceron, Aymeric; Jop, Pierre

    2016-02-12

    The complex interplay between the topography and the erosion and deposition phenomena is a key feature to model granular flows such as landslides. Here, we investigated the instability that develops during the erosion of a wet granular pile by a dry dense granular flow. The morphology and the propagation of the generated steps are analyzed in relation to the specific erosion mechanism. The selected flowing angle of the confined flow on a dry heap appears to play an important role both in the final state of the experiment, and for the shape of the structures. We show that the development of the instability is governed by the inertia of the flow through the Froude number. We model this instability and predict growth rates that are in agreement with the experiment results.

  4. Magnetohydrodynamics flow over a rapidly rotating axisymmetric wavy disk

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Myung Sup [Korea Testing Laboratory, 222-13 Guro3-dong Guro-gu, Seoul 152-718 (Korea, Republic of); Park, Jun Sang [Department of Mechanical Engineering, Halla University, Halla dae 1-gil, HeungUp, Wonju, Kangwon-do 220-712 (Korea, Republic of); Hyun, Jae Min, E-mail: jspark@halla.ac.kr [Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 373-1 Kusong-dong, Yusong-gu, Taejon 305-701 (Korea, Republic of)

    2011-08-15

    A numerical study of Magnetohydrodynamics boundary layer flow over a rapidly rotating wavy disc was performed under which magnetic fields are imposed by a circular electric coil. The shape of the disc is assumed to be axisymmetric and sinusoidal in the radial direction, and semi-infinite space over the disc steadily rotating is occupied by an electrically conducting fluid. The study was conducted for the case where the representative Reynolds number is very large and the magnetic Reynolds number is negligibly small. The effect of Lorentz force on fluid motion was precisely investigated as the main external controlling force. The generalized boundary layer equation, including both magnetic field and heat flux, is derived to examine interactions among the effects of wavy surface shape, magnetic field and heat flux from the disc surface. Two cases of uniform magnetic field, much studied in previous research, and of non-uniform magnetic field, realized by a circular coil, have been scrutinized. Details of velocity profile, skin friction coefficient and heat transfer coefficient are given.

  5. A simple probabilistic model of initiation of motion of poorly-sorted granular mixtures subjected to a turbulent flow

    Science.gov (United States)

    Ferreira, Rui M. L.; Ferrer-Boix, Carles; Hassan, Marwan

    2015-04-01

    Initiation of sediment motion is a classic problem of sediment and fluid mechanics that has been studied at wide range of scales. By analysis at channel scale one means the investigation of a reach of a stream, sufficiently large to encompass a large number of sediment grains but sufficiently small not to experience important variations in key hydrodynamic variables. At this scale, and for poorly-sorted hydraulically rough granular beds, existing studies show a wide variation of the value of the critical Shields parameter. Such uncertainty constitutes a problem for engineering studies. To go beyond Shields paradigm for the study of incipient motion at channel scale this problem can be can be cast in probabilistic terms. An empirical probability of entrainment, which will naturally account for size-selective transport, can be calculated at the scale of the bed reach, using a) the probability density functions (PDFs) of the flow velocities {{f}u}(u|{{x}n}) over the bed reach, where u is the flow velocity and xn is the location, b) the PDF of the variability of competent velocities for the entrainment of individual particles, {{f}{{up}}}({{u}p}), where up is the competent velocity, and c) the concept of joint probability of entrainment and grain size. One must first divide the mixture in into several classes M and assign a correspondent frequency p_M. For each class, a conditional PDF of the competent velocity {{f}{{up}}}({{u}p}|M) is obtained, from the PDFs of the parameters that intervene in the model for the entrainment of a single particle: [ {{u}p}/√{g(s-1){{di}}}={{Φ }u}( { {{C}k} },{{{φ}k}},ψ,{{u}p/{di}}{{{ν}(w)}} )) ] where { Ck } is a set of shape parameters that characterize the non-sphericity of the grain, { φk} is a set of angles that describe the orientation of particle axes and its positioning relatively to its neighbours, ψ is the skin friction angle of the particles, {{{u}p}{{d}i}}/{{{ν}(w)}} is a particle Reynolds number, di is the sieving

  6. Building designed granular towers one drop at a time

    Science.gov (United States)

    Chopin, Julien; Kudrolli, Arshad

    2012-02-01

    The impact of a drop on a surface leads to beautiful dynamical shapes that result from a subtle interplay between inertial effects, fluid properties and substrate characteristics. In this talk, we will present an experiment where the successive impacts of drops lead to surprisingly slender mechanically stable structures that we called granular towers. They are created by dripping a dense granular suspension on a liquid absorbing surface such as a blotter paper or a dry granular bed. These towers formed by rapid solidification of the drop upon impact are analogous to many natural structures found in nature including frozen lava flows, icicles and stalagmites. We find that the height can be determined by balancing the excess liquid flux and the drainage through the granular tower. The velocity impact, the free fall time and the density of the suspension are found to control the tower width and its detailed morphology. We show that these facts can be manipulated to obtain various symmetric, smooth, corrugated, zigzag, and chiral structures. Further, the shape of the tower can be used as a quick diagnostic tool to characterize the rheology of a granular suspension. [J. Chopin and A. Kudrolli, Phys. Rev. Lett. 107, 208304 (2011)

  7. Modelling rapid subsurface flow at the hillslope scale with explicit representation of preferential flow paths

    Science.gov (United States)

    Wienhöfer, J.; Zehe, E.

    2012-04-01

    Rapid lateral flow processes via preferential flow paths are widely accepted to play a key role for rainfall-runoff response in temperate humid headwater catchments. A quantitative description of these processes, however, is still a major challenge in hydrological research, not least because detailed information about the architecture of subsurface flow paths are often impossible to obtain at a natural site without disturbing the system. Our study combines physically based modelling and field observations with the objective to better understand how flow network configurations influence the hydrological response of hillslopes. The system under investigation is a forested hillslope with a small perennial spring at the study area Heumöser, a headwater catchment of the Dornbirnerach in Vorarlberg, Austria. In-situ points measurements of field-saturated hydraulic conductivity and dye staining experiments at the plot scale revealed that shrinkage cracks and biogenic macropores function as preferential flow paths in the fine-textured soils of the study area, and these preferential flow structures were active in fast subsurface transport of artificial tracers at the hillslope scale. For modelling of water and solute transport, we followed the approach of implementing preferential flow paths as spatially explicit structures of high hydraulic conductivity and low retention within the 2D process-based model CATFLOW. Many potential configurations of the flow path network were generated as realisations of a stochastic process informed by macropore characteristics derived from the plot scale observations. Together with different realisations of soil hydraulic parameters, this approach results in a Monte Carlo study. The model setups were used for short-term simulation of a sprinkling and tracer experiment, and the results were evaluated against measured discharges and tracer breakthrough curves. Although both criteria were taken for model evaluation, still several model setups

  8. Dynamic shear jamming in dense granular suspensions under extension

    Science.gov (United States)

    Majumdar, Sayantan; Peters, Ivo R.; Han, Endao; Jaeger, Heinrich M.

    2017-01-01

    Unlike dry granular materials, a dense granular suspension like cornstarch in water can strongly resist extensional flows. At low extension rates, such a suspension behaves like a viscous fluid, but rapid extension results in a response where stresses far exceed the predictions of lubrication hydrodynamics and capillarity. To understand this remarkable mechanical response, we experimentally measure the normal force imparted by a large bulk of the suspension on a plate moving vertically upward at a controlled velocity. We observe that, above a velocity threshold, the peak force increases by orders of magnitude. Using fast ultrasound imaging we map out the local velocity profiles inside the suspension, which reveal the formation of a growing jammed region under rapid extension. This region interacts with the rigid boundaries of the container through strong velocity gradients, suggesting a direct connection to the recently proposed shear-jamming mechanism.

  9. Shear flow of dense granular materials near smooth walls. II. Block formation and suppression of slip by rolling friction.

    Science.gov (United States)

    Shojaaee, Zahra; Brendel, Lothar; Török, János; Wolf, Dietrich E

    2012-07-01

    The role of rotational degrees of freedom and of microscopic contact properties at smooth walls in two dimensional planar shear has been investigated by contact dynamics simulations of round hard frictional particles. Our default system setup consists of smooth frictional walls, giving rise to slip. We show that there exists a critical microscopic friction coefficient at the walls, above which they are able to shear the granular medium. We observe distinctive features at this critical point, which to our knowledge have not been reported before. Activating rolling friction at smooth walls reduces slip, leading to similar shear behavior as for rough walls (with particles glued on their surface). Our simulations with rough walls are in agreement with previous results, provided the roughness is strong enough. In the limit of small roughness amplitude, however, the distinctive features of shearing with smooth walls are confirmed.

  10. Unified rheology of vibro-fluidized dry granular media: From slow dense flows to fast gas-like regimes

    Science.gov (United States)

    Gnoli, Andrea; Lasanta, Antonio; Sarracino, Alessandro; Puglisi, Andrea

    2016-01-01

    Granular media take on great importance in industry and geophysics, posing a severe challenge to materials science. Their response properties elude known soft rheological models, even when the yield-stress discontinuity is blurred by vibro-fluidization. Here we propose a broad rheological scenario where average stress sums up a frictional contribution, generalizing conventional μ(I)-rheology, and a kinetic collisional term dominating at fast fluidization. Our conjecture fairly describes a wide series of experiments in a vibrofluidized vane setup, whose phenomenology includes velocity weakening, shear thinning, a discontinuous thinning transition, and gaseous shear thickening. The employed setup gives access to dynamic fluctuations, which exhibit a broad range of timescales. In the slow dense regime the frequency of cage-opening increases with stress and enhances, with respect to μ(I)-rheology, the decrease of viscosity. Diffusivity is exponential in the shear stress in both thinning and thickening regimes, with a huge growth near the transition. PMID:27924928

  11. Challenges of Particle Flow reconstruction in the CMS High-Granularity Calorimeter at the High-Luminosity LHC

    CERN Document Server

    Chlebana, Frank

    2016-01-01

    The challenges of the High-Luminosity LHC (HL-LHC) are driven by the large number of overlapping proton-proton collisions (pileup) in each bunch-crossing and the extreme radiation dose to detectors positioned at high pseudorapidity. To overcome this challenge CMS is designing and implementing an endcap electromagnetic+hadronic sampling calorimeter employing silicon pad devices in the electromagnetic and front hadronic sections, comprising over 6 million channels, and highly-segmented plastic scintillators in the rear part of the hadronic section. This High-Granularity Calorimeter (HGCAL) will be the first of its kind used in a colliding beam experiment. Clustering deposits of energy over many cells and layers is a complex and challenging computational task, particularly in the high-pileup and high-event-rate environment of HL-LHC. These challenges and their solutions will be discussed in detail, as well as their implementation in the HGCAL offline reconstruction. Baseline detector performance results will be ...

  12. Update of Columbia River flow and temperature data measured at Priest Rapids Dam and Vernita Bridge

    Energy Technology Data Exchange (ETDEWEB)

    Whelan, G.; Newbill, C.A.

    1983-09-01

    Columbia River temperatures and flow rates are collected daily at Priest Rapids Dam and Vernita Bridge. These data are necessary for assessing trends or changes in river conditions downstream of Priest Rapids Dam. In order to analyze this data, Pacific Northwest Laboratory developed a computerized data base using existing US Geological Survey flow and temperature records at Priest Rapids Dam and Vernita Bridge. Daily-averaged temperature and daily flow information on the Columbia River just downstream of Priest Rapids Dam and upstream of river mile 380 were collected and stored in a data base. A newly developed computer model, COLSTAT (Columbia River Statistical Update), used the data base to statistically analyze temperature and flow conditions by computing the frequency of occurrence and duration of selected temperatures and flow rates for the Columbia River. Information regarding the data base is presented, as well as, a description of the COLSTAT model.

  13. The flow of two falling balls mixes rapidly

    Science.gov (United States)

    Bálint, Péter; Némedy Varga, András

    2016-09-01

    In this paper we study the system of two falling balls in continuous time. We model the system by a suspension flow over a two dimensional, hyperbolic base map. By detailed analysis of the geometry of the system we identify special periodic points and show that the ratio of certain periods in continuous time is Diophantine for almost every value of the mass parameter in an interval. Using results of Melbourne (2007 Trans. Am. Math. Soc. 359 2421-41) and our previous achievements (Bálint et al 2012 Chaos 22 026104) we conclude that for these values of the parameter the flow mixes faster than any polynomial. Even though the calculations are presented for the specific physical system, the method is quite general and can be applied to other suspension flows, too.

  14. Multiscale modelling of fluid-immersed granular media

    OpenAIRE

    Clément, Christian Paul André René

    2010-01-01

    In this thesis we present numerical simulation studies of fluid-immersed granular systems using models of varying scales and complexities. These techniques are used to examine the effects of an interstitial fluid on the dynamics of dense granular beds within a number of vibrated systems. After an introduction to the field of granular materials, we present the techniques used to model both the granular dynamics and the fluid flow. We introduce various multiscale techniques to couple the mo...

  15. Rapid detection of fungal alpha-amylase in the work environment with a lateral flow immunoassay

    NARCIS (Netherlands)

    Bogdanovic, J.; Koets, M.; Sander, I.; Wouters, I.; Meijster, T.; Heederik, D.J.J.; Amerongen, van A.; Doekes, G.

    2006-01-01

    Background Occupational allergen exposure assessment usually requires airborne dust sampling at the worksite followed by dust extraction and enzyme immunoassay (EIA) analysis at the laboratory. Use of semiquantitative lateral flow immunoassays (LFIAs) may allow a more rapid detection procedure with

  16. Improving emergency department flow through Rapid Medical Evaluation unit.

    Science.gov (United States)

    Chartier, Lucas; Josephson, Timothy; Bates, Kathy; Kuipers, Meredith

    2015-01-01

    The Toronto Western Hospital is an academic hospital in Toronto, Canada, with an annual Emergency Department (ED) volume of 64,000 patients. Despite increases in patient volumes of almost six percent per annum over the last decade, there have been no commensurate increases in resources, infrastructure, and staffing. This has led to substantial increase in patient wait times, most specifically for those patients with lower acuity presentations. Despite requiring only minimal care, these patients contribute disproportionately to ED congestion, which can adversely impact resource utilization and quality of care for all patients. We undertook a retrospective evaluation of a quality improvement initiative aimed at improving wait times experienced by patients with lower acuity presentations. A rapid improvement event was organized by frontline workers to rapidly overhaul processes of care, leading to the creation of the Rapid Medical Evaluation (RME) unit - a new pathway of care for patients with lower acuity presentations. The RME unit was designed by re-purposing existing resources and re-assigning one physician and one nurse towards the specific care of these patients. We evaluated the performance of the RME unit through measurement of physician initial assessment (PIA) times and total length of stay (LOS) times for multiple groups of patients assigned to various ED care pathways, during three periods lasting three months each. Weekly measurements of mean and 90th percentile of PIA and LOS times showed special cause variation in all targeted patient groups. Of note, the patients seen in the RME unit saw their median PIA and LOS times decrease from 98min to 70min and from 165min to 130min, respectively, from baseline. Despite ever-growing numbers of patient visits, wait times for all patients with lower acuity presentations remained low, and wait times of patients with higher acuity presentations assigned to other ED care pathways were not adversely affected. By

  17. Simulation study of the effect of wall roughness on the dynamics of granular flows in rotating semicylindrical chutes

    NARCIS (Netherlands)

    Shirsath, Sushil S.; Padding, Johan T.; Kuipers, J.A.M. (Hans); Clercx, Herman J.H.

    2015-01-01

    A discrete element model (DEM) is used to investigate the behavior of spherical particles flowing down a semicylindrical rotating chute. The DEM simulations are validated by comparing with particle tracking velocimetry results of spherical glass particles flowing through a smooth semicylindrical chu

  18. Some open problems in granular matter mechanics

    Institute of Scientific and Technical Information of China (English)

    Qicheng Sun; Guangqian Wang; Kaiheng Hu

    2009-01-01

    Granular matter is a large assemblage of solid particles,which is fundamentally different from any other type of matters,such as solid and liquid.Most models presented for granular matter are phenomenological and are only suitable for solving engineering problems.Many fundamental mechanical problems remain open.By analyzing characteristics of internal state structure,we propose that granularmatter is intrinsically multiscale,i.e.microscale of particle size,mesoscale of force chain,and macroscale of the bulk of granular matter.The correlations among difference scales would be crucial.The mesoscale force chain network is determined by both particle properties and macroscopic boundary conditions.The evolution of the force the chain network contributes to macroscopic mechanical properties of granular matter.In addition,we discuss the drawbacks in simplifying contact forces in the current models,and the difficulties in analyzing the interaction of interstitial fluid in wet granular matter.As an appropriate application of granular matter,debris flow can be studied with granular matter mechanics;meanwhile,debris flow brings more challenges which certainly motivate future studies on granular matter.(C) 2008 National Natural Science Foundation of China and Chinese Academy of Sciences.Published by Elsevier Limited and Science in China Press.All rights reserved.

  19. Evidence for Rapid Redshift Evolution of Strong Cluster Cooling Flows

    CERN Document Server

    Samuele, R; Vikhlinin, A; Mullis, C R

    2011-01-01

    We present equivalent widths of the [OII] and Ha nebular emission lines for 77 brightest cluster galaxies (BCGs) selected from the 160 Square Degree $ROSAT$ X-ray survey. We find no [OII] or Ha emission stronger than -15 angstroms or -5 angstroms, respectively, in any BCG. The corresponding emission line luminosities lie below 6E40 erg/s, which is a factor of 30 below that of NGC1275 in the Perseus cluster. A comparison to the detection frequency of nebular emission in BCGs lying at redshifts above z = 0.35 drawn from the Brightest Cluster Survey (Crawford et al. 1999) indicates that we should have detected roughly one dozen emission-line galaxies, assuming the two surveys are selecting similar clusters in the X-ray luminosity range 10E42 erg/s to 10E45 erg/s. The absence of luminous nebular emission (ie., Perseus-like systems) in our sample is consistent with an increase in the number density of {\\it strong} cooling flow (cooling core) clusters between $\\rm z=0.5$ and today. The decline in their numbers at h...

  20. Mathematical modelling of the transport of a poorly sorted granular mixture as a debris-flow. The case of Madeira Island torrential floods in 2010

    Science.gov (United States)

    Ferreira, Rui M. L.; Oliveira, Rodrigo P.; Conde, Daniel

    2016-04-01

    On the 20th February 2010, heavy rainfall was registered at Madeira Island, North Atlantic. Stony debris flows, mudflows and mudslides ensued causing severe property loss, 1.5 m thick sediment deposits at downtown Funchal including 16th century monuments, and a death toll of 47 lives. Debris-flow fronts propagated downstream while carrying very high concentrations of solid material. These two-phase solid-fluid flows were responsible for most of the infrastructural damage across the island, due to their significantly increased mass and momentum. The objective of the present modelling work is to validate a 2DH model for torrential flows featuring the transport and interaction of several size fractions of a poorly-sorted granular mixture typical of stony debris flow in Madeira. The module for the transport of poorly-sorted material was included in STAV-2D (CERIS-IST), a shallow-water and morphology solver based on a finite-volume method using a flux-splitting technique featuring a reviewed Roe-Riemann solver, with appropriate source-term formulations to ensure full conservativeness. STAV-2D also includes formulations of flow resistance and bedload transport adequate for debris-flows with natural mobile beds (Ferreira et al., 2009) and has been validated with both theoretical solutions and laboratory data (Soares-Frazão et al., 2012; Canelas et al., 2013). The modelling of the existing natural and built environment is fully explicit. All buildings, streets and channels are accurately represented within the mesh geometry. Such detail is relevant for the reliability of the validation using field data, since the major sedimentary deposits within the urban meshwork of Funchal were identified and characterized in terms of volume and grain size distribution during the aftermath of the 20th February of 2010 event. Indeed, the measure of the quality of the numerical results is the agreement between simulated and estimated volume of deposited sediment and between estimated and

  1. Current challenges for pre-earthquake electromagnetic emissions: shedding light from micro-scale plastic flow, granular packings, phase transitions and self-affinity notion of fracture process

    Directory of Open Access Journals (Sweden)

    K. Eftaxias

    2013-10-01

    Full Text Available Are there credible electromagnetic (EM potential earthquake (EQ precursors? This a question debated in the scientific community and there may be legitimate reasons for the critical views. The negative view concerning the existence of EM potential precursors is enhanced by features that accompany their observation which are considered as paradox ones, namely, these signals: (i are not observed at the time of EQs occurrence and during the aftershock period, (ii are not accompanied by large precursory strain changes, (iii are not accompanied by simultaneous geodetic or seismological precursors and (iv their traceability is considered problematic. In this work, the detected candidate EM potential precursors are studied through a shift in thinking towards the basic science findings relative to granular packings, micron-scale plastic flow, interface depinning, fracture size effects, concepts drawn from phase transitions, self-affine notion of fracture and faulting process, universal features of fracture surfaces, recent high quality laboratory studies, theoretical models and numerical simulations. We try to contribute to the establishment of strict criteria for the definition of an emerged EM anomaly as a possibly EQ-related one, and to the explanation of potential precursory EM features which have been considered as paradoxes. A three-stage model for EQ generation by means of pre-EQ fracture-induced EM emissions is proposed. The claim that the observed EM potential precursors may permit a real-time and step-by-step monitoring of the EQ generation is tested.

  2. Different singularities in the functions of extended kinetic theory at the origin of the yield stress in granular flow

    NARCIS (Netherlands)

    Berzi, D.; Vescovi, Dalila

    2015-01-01

    We use previous results from discrete element simulations of simple shear flows of rigid, identical spheres in the collisional regime to show that the volume fractiondependence of the stresses is singular at the shear rigidity. Here, we identify the shear rigidity, which is a decreasing function of

  3. River-bed armoring as a granular segregation phenomenon

    CERN Document Server

    Ferdowsi, Behrooz; Houssais, Morgane; Jerolmack, Douglas J

    2016-01-01

    Gravel-river beds typically have an "armored" layer of coarse grains on the surface, which acts to protect finer particles underneath from erosion. River bed-load transport is a kind of dense granular flow, and such flows are known to vertically segregate grains. The contribution of granular physics to river-bed armoring, however, has not been investigated. Here we examine these connections in a laboratory river with bimodal sediment size, by tracking the motion of particles from the surface to deep inside the bed, and find that armor develops by two distinct mechanisms. Bed-load transport in the near-surface layer drives rapid segregation, with a vertical advection rate proportional to the granular shear rate. Creeping grains beneath the bed-load layer give rise to slow but persistent segregation, which is diffusion dominated and insensitive to shear rate. We verify these findings with a continuum phenomenological model and discrete element method simulations. Our results suggest that river beds armor by gra...

  4. Bulldozing of granular material

    CERN Document Server

    Sauret, A; Caulfield, C P; McElwaine, J N

    2014-01-01

    We investigate the bulldozing motion of a granular sandpile driven forwards by a vertical plate. The problem is set up in the laboratory by emplacing the pile on a table rotating underneath a stationary plate; the continual circulation of the bulldozed material allows the dynamics to be explored over relatively long times, and the variation of the velocity with radius permits one to explore the dependence on bulldozing speed within a single experiment. We measure the time-dependent surface shape of the dune for a range of rotation rates, initial volumes and radial positions, for four granular materials, ranging from glass spheres to irregularly shaped sand. The evolution of the dune can be separated into two phases: a rapid initial adjustment to a state of quasi-steady avalanching perpendicular to the blade, followed by a much slower phase of lateral spreading and radial migration. The quasi-steady avalanching sets up a well-defined perpendicular profile with a nearly constant slope. This profile can be scale...

  5. Granular axial flow characteristics in a grinding area studied by discrete element metho d%受碾区域内颗粒轴向流动特性的离散元模拟∗

    Institute of Scientific and Technical Information of China (English)

    韩燕龙; 贾富国; 曾勇; 王爱芳

    2015-01-01

    Granular grinding is one of the most important unit operations used in a wide variety of industries. Examples can be found in the food industry, for instance, rice processing, etc.. The performance of grinding can be characterized by the particle flow process. Thus in order to study the stable flow process of particles during grinding, we must establish a discrete element model (DEM) of granular axial flow in the grinding area between the grinding roller and the screen drum. DEM is a numerical method used for modelling the mechanical behaviour of granular materials. When DEM is used in grinding, the particle motion is controlled by contact models that are governed by physical laws. Using EDEM software, the process of grinding can be simulated and analyzed. The simulation system chooses continuous feeding;after a period of time, it reaches a steady flow. Research results show that the uneven distribution of particle flow density (PFD) is caused by the axial movement difference of particles in the grinding area. The form, flow rate and distribution of granular axial flow are influenced by static friction coefficient difference between particles and screen drum. Axial mean square deviation of single particles in the grinding area is positively correlated with the square of time, which follows a “super” diffusive behavior defined by some studies. By an overall consideration of the grinding area, we find that the axial average velocities increase, however, the average velocities that are synthesized by three-axis velocities gradually decrease along the axial direction. This is because in a different axial position with different PFI, the PFI plays the key role in energy transfer. More energy will be transferred between high PFI particles that may cause high particle velocity. We also find that the fluctuation velocity square of particles presents the trend of first increasing then decreasing and finally increasing along the axial direction. The difference between

  6. Grain scale simulation of multiphase flow through porous media; Simulacao em escala granular do escoamento multifasico em meio poroso

    Energy Technology Data Exchange (ETDEWEB)

    Domingos, Ricardo Golghetto; Cheng, Liang-Yee [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica

    2012-07-01

    Since the grain scale modeling of multi-phase flow in porous media is of great interest for the oil industry, the aim of the present research is to show an implementation of Moving Particle Semi-Implicit (MPS) method for the grain scale simulation of multi-phase flow in porous media. Geometry data obtained by a high-resolution CT scan of a sandstone sample has been used as input for the simulations. The results of the simulations performed considering different resolutions are given, the head loss and permeability obtained numerically, as well as the influence of the wettability of the fluids inside the sample of the reservoir's sandstone. (author)

  7. Comparison of multi-sphere and superquadric particle representation for modelling shearing and flow characteristics of granular assemblies

    Science.gov (United States)

    Soltanbeigi, Behzad; Podlozhnyuk, Alexander; Ooi, Jin Y.; Kloss, Christoph; Papanicolopulos, Stefanos-Aldo

    2017-06-01

    In the current study, complex-shaped particles are simulated with the Discrete Element Method (DEM) using two different approaches, namely Multi-spheres (MS) and Superquadrics (SQ). Both methods have been used by researchers to represent the shape of real particles. However, despite the growing popularity of utilizing MS and SQ particles in DEM simulations, few insights have been given on the comparison of the macro scale characteristics arising from the two methods. In this respect, initially the characteristics of the two shape representation methods are evaluated in a direct shear test simulation. The results suggest that controlling the sharpness of the edges for SQ particles can lead to a good agreement with the results of MS particles. This way, a set of SQ and MS particles, which are numerically calibrated in the shear tester, are obtained. Furthermore, the macro-scale responses of the numerically calibrated particles are assessed during a slow shearing scenario, which is achieved through simulating quasi-static flow of the particles from a flat-bottom silo. The results for mass discharge, flow profile and wall pressure show a good quantitative agreement. These findings suggest that the numerically calibrated MS and SQ particles in the shear tester can provide similar bulk-scale flow properties. Moreover, the results highlight that surface bumpiness for MS particles and corner sharpness for SQ particles change the characteristics of particles and play a significant role in the shear strength of the material composed of these particles.

  8. Water velocity and the nature of critical flow in large rapids on the Colorado River, Utah

    Science.gov (United States)

    Magirl, C.S.; Gartner, J.W.; Smart, G.M.; Webb, R.H.

    2009-01-01

     Rapids are an integral part of bedrock-controlled rivers, influencing aquatic ecology, geomorphology, and recreational value. Flow measurements in rapids and high-gradient rivers are uncommon because of technical difficulties associated with positioning and operating sufficiently robust instruments. In the current study, detailed velocity, water surface, and bathymetric data were collected within rapids on the Colorado River in eastern Utah. With the water surface survey, it was found that shoreline-based water surface surveys may misrepresent the water surface slope along the centerline of a rapid. Flow velocities were measured with an ADCP and an electronic pitot-static tube. Integrating multiple measurements, the ADCP returned velocity data from the entire water column, even in sections of high water velocity. The maximum mean velocity measured with the ADCP was 3.7 m/s. The pitot-static tube, while capable of only point measurements, quantified velocity 0.39 m below the surface. The maximum mean velocity measured with the pitot tube was 5.2 m/s, with instantaneous velocities up to 6.5 m/s. Analysis of the data showed that flow was subcritical throughout all measured rapids with a maximum measured Froude number of 0.7 in the largest measured rapids. Froude numbers were highest at the entrance of a given rapid, then decreased below the first breaking waves. In the absence of detailed bathymetric and velocity data, the Froude number in the fastest-flowing section of a rapid was estimated from near-surface velocity and depth soundings alone.

  9. Correlation of voidage and stress of granular materials in a packed moving bed accompanied with gas flow; Gasu nagare wo tomonau funtai idoso ni okeru kugekiritsu to funtaiatsu no kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tomoyasu, Yoshitada. [Sanzou Energy Engineering Corp., Okayama (Japan); Yoshino, Fumio.; Iwata, Hiroshi.; Kawazoe, Hiromitsu. [Tottori University, Tottori (Japan). Dept. of Mechanical Engineering

    1999-03-10

    The flow characteristics of granular materials and gas in a vertical packed moving bed, called a [stand pipe], furnished at the bottom of the fluidized bed are investigated theoretically and experimentally. A correlation equation of axial stress {sigma}{sub z} and voidage {epsilon} of granular materials in the stand pipe is proposed through investigations of the continuity equation, the momentum balance equation, Ergun's equation for gas pressure loss and the gas pressure distribution data measured experimentally in the axial direction. Regarding the relation of the axial stress and the voidage, it was recogniged that : 1. The absolute value of d{sigma}{sub z}/d{epsilon} is large at the voidage near the minimum fluidizing condition, and at the voidage in the dense packed condition, and an inflection point of {sigma}{sub z} exists in range between the both conditions ; 2. It seems to be the wall-friction-effect of stand pipe that the absolute value of d{sigma}{sub z}/d{epsilon} is larger at the inlet of stand pipe, and ; 3. The stress is also a function of the particle diameter. The gas flow rate, axial stress distribution of granular materials, gas pressure distribution and voidage distribution in the axial direction of the stand pipe can be calculated from relating equations. (author)

  10. Granular avalanches down inclined and vibrated planes

    Science.gov (United States)

    Gaudel, Naïma; Kiesgen de Richter, Sébastien; Louvet, Nicolas; Jenny, Mathieu; Skali-Lami, Salaheddine

    2016-09-01

    In this article, we study granular avalanches when external mechanical vibrations are applied. We identify conditions of flow arrest and compare with the ones classically observed for nonvibrating granular flows down inclines [Phys. Fluids 11, 542 (1999), 10.1063/1.869928]. We propose an empirical law to describe the thickness of the deposits with the inclination angle and the vibration intensity. The link between the surface velocity and the depth of the flow highlights a competition between gravity and vibrations induced flows. We identify two distinct regimes: (a) gravity-driven flows at large angles where vibrations do not modify dynamical properties but the deposits (scaling laws in this regime are in agreement with the literature for nonvibrating granular flows) and (b) vibrations-driven flows at small angles where no flow is possible without applied vibrations (in this last regime, the flow behavior can be properly described by a vibration induced activated process). We show, in this study, that granular flows down inclined planes can be finely tuned by external mechanical vibrations.

  11. HYPERELASTIC MODELS FOR GRANULAR MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    Humrickhouse, Paul W; Corradini, Michael L

    2009-01-29

    A continuum framework for modeling of dust mobilization and transport, and the behavior of granular systems in general, has been reviewed, developed and evaluated for reactor design applications. The large quantities of micron-sized particles expected in the international fusion reactor design, ITER, will accumulate into piles and layers on surfaces, which are large relative to the individual particle size; thus, particle-particle, rather than particle-surface, interactions will determine the behavior of the material in bulk, and a continuum approach is necessary and justified in treating the phenomena of interest; e.g., particle resuspension and transport. The various constitutive relations that characterize these solid particle interactions in dense granular flows have been discussed previously, but prior to mobilization their behavior is not even fluid. Even in the absence of adhesive forces between particles, dust or sand piles can exist in static equilibrium under gravity and other forces, e.g., fluid shear. Their behavior is understood to be elastic, though not linear. The recent “granular elasticity” theory proposes a non-linear elastic model based on “Hertz contacts” between particles; the theory identifies the Coulomb yield condition as a requirement for thermodynamic stability, and has successfully reproduced experimental results for stress distributions in sand piles. The granular elasticity theory is developed and implemented in a stand- alone model and then implemented as part of a finite element model, ABAQUS, to determine the stress distributions in dust piles subjected to shear by a fluid flow. We identify yield with the onset of mobilization, and establish, for a given dust pile and flow geometry, the threshold pressure (force) conditions on the surface due to flow required to initiate it. While the granular elasticity theory applies strictly to cohesionless granular materials, attractive forces are clearly important in the interaction of

  12. Delayed Effect of Blood-Flow-Restricted Resistance Training on Rapid Force Capacity

    DEFF Research Database (Denmark)

    Nielsen, Jakob Lindberg; Frandsen, Ulrik; Prokhorova, Tatyana

    2017-01-01

    PURPOSE: The aim of the present study was to investigate the effect and time course of high-frequent low-load resistance training with blood-flow restriction (BFR) on rapid force capacity (i.e. rate of torque development (RTD)). METHODS: Ten male subjects (22.8±2.3 years) performed four sets...... and rapid force capacity (e.g. RTD) as well as evoked twitch contractile parameters was assessed before (Pre) and 5 and 12 days after training (Post5, Post12). Muscle biopsies were obtained Pre, after 8 days (Mid8) and 3 and 10 days post training (Post3, Post10) to examine changes in myofiber area...... exercise performed with blood-flow restriction leads to marked increases in rapid force capacity (RTD). However, a general delayed adaptive response was observed for voluntary contractile parameters (including RTD) in parallel with a decline and subsequent recovery in evoked contractile properties...

  13. Rapid heat-flowing surveying of geothermal areas, utilizing individual snowfalls as calorimeters

    Science.gov (United States)

    White, Donald E.

    1969-01-01

    Local differences in rate of heat transfer in vapor and by conduction through the ground in hot spring areas are difficult and time-consuming to measure quantitatively. Individual heavy snowfalls provide a rapid low-cost means of measuring total heat flow from such ground. After a favorable snowfall (heavy, brief duration, little wind, air temperature near 0°C), contacts between snow-covered and snow-free ground are mapped on a suitable base. Each mapped contact, as time elapses after a specific snowfall, is a heat-flow contour representing a decreasing rate of flow. Calibration of each mapped contact or snow line is made possible by the fact that snow remains on insulated surfaces (such as the boardwalks of Yellowstone's thermal areas) long after it has melted on adjacent warm ground. Heat-flow contours mapped to date range from 450 to 5500 μcal/cm2 sec, or 300 to 3700 times the world average of conductive heat flow. The very high rates of heat flow (2000 to > 10,000 μcal/cm2 sec) are probably too high, and the lower heat flows determinable by the method (2 sec) may be too low. Values indicated by the method are, however, probably within a factor of 2 of the total conductive and convective heat flow. Thermal anomalies from infrared imagery are similar in shape to heat-flow contours of a test area near Old Faithful geyser. Snowfall calorimetry provides a rapid means for evaluating the imagery and computer-derived products of the infrared data in terms of heat flow.

  14. Pore Water Pressure Contribution to Debris Flow Mobility

    OpenAIRE

    Chiara Deangeli

    2009-01-01

    Problem statement: Debris flows are very to extremely rapid flows of saturated granular soils. Two main types of debris flow are generally recognized: Open slope debris flows and channelized debris flows. The former is the results of some form of slope failures, the latter can develop along preexisting stream courses by the mobilization of previously deposited debris blanket. The problem to be addressed is the influence of the mode of initiation on the subsequent mechanism of propagation. In ...

  15. On Granular Knowledge Structures

    CERN Document Server

    Zeng, Yi

    2008-01-01

    Knowledge plays a central role in human and artificial intelligence. One of the key characteristics of knowledge is its structured organization. Knowledge can be and should be presented in multiple levels and multiple views to meet people's needs in different levels of granularities and from different perspectives. In this paper, we stand on the view point of granular computing and provide our understanding on multi-level and multi-view of knowledge through granular knowledge structures (GKS). Representation of granular knowledge structures, operations for building granular knowledge structures and how to use them are investigated. As an illustration, we provide some examples through results from an analysis of proceeding papers. Results show that granular knowledge structures could help users get better understanding of the knowledge source from set theoretical, logical and visual point of views. One may consider using them to meet specific needs or solve certain kinds of problems.

  16. Granular Solid-liquid Transition: Experiment and Simulation

    Science.gov (United States)

    Fei, M.; Xu, X.; Sun, Q.

    2015-12-01

    Granular media are amorphous materials, which differs from traditional solid or liquid. In different circumstance, granular behavior varies from solid-like to liquid-like, and the transitions between these regimes are always related to many complex natural progresses such as the failure of soil foundation and the occurrence of landslide and debris flow. The mechanic of elastic instability during the transition from solid-like to liquid-like regime, and the quantitative description of irreversible deformation during flow are the key problems to interpret these transition phenomena. In this work, we developed a continuum model with elastic stable condition and irreversible flow rule of granular material based on a thermal dynamical model, the Two-Granular-Temperature model (TGT). Since infinitesimal elastic deformation in solid-like regime and significant plastic large deformation in liquid-like regime can coexist in the granular solid-liquid transition process, the material point method (MPM) was used to build an effective numerical model. Collapse of rectangular granular pile contains both the transition from granular solid to granular liquid and the inverse process, thus in this work we carried out collapse experiment with clay particles, and simulated the experiment with our continuum model and an open-source DEM model YADE to study the transition processes. Results between experiment and simulations were compared and good agreements on collapse shape and velocity profiles were achieved, and the new model proposed in this work seems to work well on the description of granular solid-liquid transition.

  17. Use of flow cytometry for rapid and accurate enumeration of live pathogenic Leptospira strains.

    Science.gov (United States)

    Fontana, Célia; Crussard, Steve; Simon-Dufay, Nathalie; Pialot, Daniel; Bomchil, Natalia; Reyes, Jean

    2017-01-01

    Enumeration of Leptospira, the causative agent of leptospirosis, is arduous mainly because of its slow growth rate. Rapid and reliable tools for numbering leptospires are still lacking. The current standard for Leptospira cultures is the count on Petroff-Hausser chamber under dark-field microscopy, but this method remains time-consuming, requires well-trained operators and lacks reproducibility. Here we present the development of a flow-cytometry technique for counting leptospires. We showed that upon addition of fluorescent dyes, necessary to discriminate the bacterial population from debris, several live Leptospira strains could be enumerated at different physiologic states. Flow cytometry titers were highly correlated to counts with Petroff-Hausser chambers (R(2)>0.99). Advantages of flow cytometry lie in its rapidity, its reproducibility significantly higher than Petroff-Hausser method and its wide linearity range, from 10(4) to 10(8)leptospires/ml. Therefore, flow cytometry is a fast, reproducible and sensitive tool representing a promising technology to replace current enumeration techniques of Leptospira in culture. We were also able to enumerate Leptospira in artificially infected urine and blood with a sensitivity limit of 10(5)leptospires/ml and 10(6)leptospires/ml, respectively, demonstrating the feasibility to use flow cytometry as first-line tool for diagnosis or bacterial dissemination studies.

  18. Size Segregation in Rapid Flows of Inelastic Particles with Continuous Size Distributions

    Institute of Scientific and Technical Information of China (English)

    LI Rui; ZHANG Duan-Ming; LI Zhi-Hao

    2012-01-01

    Two-dimensional numerical simulations are employed to gain insight into the segregation behavior of granular mixtures with a power-law particle size distribution in the presence of a granular temperature gradient.It is found that particles of all sizes move toward regions of low granular temperature.Species segregation is also observed.Large particles demonstrate a higher affinity for the low-temperature regions and accumulate in these cool regions to a greater extent than their smaller counterparts.Furthermore,the local particle size distribution maintains the same form as the overall (including all particles) size distribution.%Two-dimensional numerical simulations are employed to gain insight into the segregation behavior of granular mixtures with a power-law particle size distribution in the presence of a granular temperature gradient. It is found that particles of all sizes move toward regions of low granular temperature. Species segregation is also observed. Large particles demonstrate a higher affinity for the low-temperature regions and accumulate in these cool regions to a greater extent than their smaller counterparts. Furthermore, the local particle size distribution maintains the same form as the overall (including all particles) size distribution.

  19. Numerical investigations of the force experienced by a wall subject to granular lid-driven flows: regimes and scaling of the mean force

    Science.gov (United States)

    Kneib, François; Faug, Thierry; Dufour, Frédéric; Naaim, Mohamed

    2016-07-01

    Discrete element simulations are used to model a two-dimensional gravity-free granular sample, which is trapped between two smooth sidewalls and one bottom rough wall while being subject to a constant shearing velocity at the top under a given confinement pressure. This system, inspired by conventional fluid mechanics, is called a granular lid-driven cavity. Attention is firstly paid to the time-averaged dynamics of the grains once a steady-state is reached. Strong spatial heterogeneities associated with a large-scale vortex formed within the whole volume of the lid-driven cavity are observed. The mean steady force on the sidewall facing the shearing velocity is then investigated in detail for different cavity lengths, shearing velocities and confinement pressures at the top. The ratio of the force on the latter wall to the top confinement pressure force is not constant but depends on both the shearing velocity and the confinement pressure. Above a critical value of the cavity length relative to the wall height and over a wide range of both shearing velocity and top confinement pressure, all data merge into a one-to-one relation between the mean force scaled by the top pressure force and the macroscopic inertial number of the lid-driven cavity. This result reveals the key role played by the inertial rheology of the granular material in the granular force transmission.

  20. Research on cellular automata of traffic flow based on granular computing%基于粒计算的元胞自动机交通流的研究

    Institute of Scientific and Technical Information of China (English)

    江顺亮; 黄小慧; 杨力; 徐少平

    2009-01-01

    Granular computing technology is introduced into the cellular automata traffic flow study. Based on the three-layer construction of cells, granules and traffic network, the traditional traffic flow systems may be improved. For the new traffic flow simulation system, the idea of granules and granular computing is reflected in the concept of motorcade, and the status of all cars will be updated in the hierarchal order of road sections, motorcades and vehicles during a time step.%将粒计算技术引入到元胞自动机的交通流研究中,从而为进一步提出基于元胞、粒和交通网络三层结构的交通流系统奠定基础,继而改进传统交通流模拟系统的架构.在此交通流模拟系统中,粒及粒计算的思想反映为系统设计中的车队概念,而在某一时间步进内,交通网络中所有车辆的更新将按照路段、车队、车辆的层级顺序进行.

  1. Partially saturated granular column collapse

    Science.gov (United States)

    Turnbull, Barbara; Johnson, Chris

    2017-04-01

    Debris flows are gravity-driven sub-aerial mass movements containing water, sediments, soil and rocks. These elements lead to characteristics common to dry granular media (e.g. levee formation) and viscous gravity currents (viscous fingering and surge instabilities). The importance of pore fluid in these flows is widely recognised, but there is significant debate over the mechanisms of build up and dissipation of pore fluid pressure within debris flows, and the resultant effect this has on dilation and mobility of the grains. Here we specifically consider the effects of the liquid surface in the flow. We start with a simple experiment constituting a classical axisymmetric granular column collapse, but with fluid filling the column up to a depth comparable to the depth of grains. Thus, as the column collapses, capillary forces may be generated between the grains that prevent dilation. We explore a parameter space to uncover the effects of fluid viscosity, particle size, column size, aspect ratio, grain shape, saturation level, initial packing fraction and significantly, the effects of fine sediments in suspension which can alter the capillary interaction between wetted macroscopic grains. This work presents an initial scaling analysis and attempts to relate the findings to current debris flow modelling approaches.

  2. Experimental observations of flow instabilities and rapid mixing of two dissimilar viscoelastic liquids

    Directory of Open Access Journals (Sweden)

    Hiong Yap Gan

    2012-12-01

    Full Text Available Viscoelastically induced flow instabilities, via a simple planar microchannel, were previously used to produce rapid mixing of two dissimilar polymeric liquids (i.e. at least a hundredfold different in shear viscosity even at a small Reynolds number. The unique advantage of this mixing technology is that viscoelastic liquids are readily found in chemical and biological samples like organic and polymeric liquids, blood and crowded proteins samples; their viscoelastic properties could be exploited. As such, an understanding of the underlying interactions will be important especially in rapid microfluidic mixing involving multiple-stream flow of complex (viscoelastic fluids in biological assays. Here, we use the same planar device to experimentally show that the elasticity ratio (i.e. the ratio of stored elastic energy to be relaxed between two liquids indeed plays a crucial role in the entire flow kinematics and the enhanced mixing. We demonstrate here that the polymer stretching dynamics generated in the upstream converging flow and the polymer relaxation events occurring in the downstream channel are not exclusively responsible for the transverse flow mixing, but the elasticity ratio is also equally important. The role of elasticity ratio for transverse flow instability and the associated enhanced mixing were illustrated based on experimental observations. A new parameter Deratio = Deside / Demain (i.e. the ratio of the Deborah number (De of the sidestream to the mainstream liquids is introduced to correlate the magnitude of energy discontinuity between the two liquids. A new Deratio-Demain operating space diagram was constructed to present the observation of the effects of both elasticity and energy discontinuity in a compact manner, and for a general classification of the states of flow development.

  3. Rapid parallel flow cytometry assays of active GTPases using effector beads.

    Science.gov (United States)

    Buranda, Tione; BasuRay, Soumik; Swanson, Scarlett; Agola, Jacob; Bondu, Virginie; Wandinger-Ness, Angela

    2013-11-15

    We describe a rapid assay for measuring the cellular activity of small guanine triphosphatases (GTPases) in response to a specific stimulus. Effector-functionalized beads are used to quantify in parallel multiple GTP-bound GTPases in the same cell lysate by flow cytometry. In a biologically relevant example, five different Ras family GTPases are shown for the first time to be involved in a concerted signaling cascade downstream of receptor ligation by Sin Nombre hantavirus.

  4. 倾斜推移体激发颗粒流的连续介质模型%A Continuum Model of Granular Flow Induced By Inclined Plane

    Institute of Scientific and Technical Information of China (English)

    郭鸿; 骆亚生; 程大伟; 陈茜; 陈栋梁

    2015-01-01

    岩土工程中的土方推移等属于颗粒体的倾斜推移问题,探索了倾斜推移体在颗粒中平动推移时所受的阻力和升力。应用惯性数的理念,确定了流态类型,提出了适合非准静态流的广义摩擦系数。在此基础上,用基于改进的库伦被动土压力理论,通过基于二维颗粒离散元的位移场分析,建立了预测推移阻力和升力的楔体模型。结果表明,在其他条件相同时,推移阻力不随推移体的倾角变化,但是升力随倾角的增大而显著减小。升力和阻力分别是作用在推移体上合力的竖直分量和水平分量,且阻力和升力的比值为推移体倾角的正切值。广义摩擦角是推移速度和倾角的二次函数。所建立的模型可以预测不同倾角和推移速度时推移阻力和升力的大小。%Soils moving is one of the geotechnical problems, which can be described as a granular flow induced by inclined plane.This work aims to investigate the drag and lift forces acting on the inclined in-truder.By using the inertial number concept to confirm the flow regime, a parameter named dynamic fric-tion coefficient is induced to this non-quasi-static flow.By improving the Coulomb model, the displace-ment field is obtained by two dimensional discrete element method, and the wedge model for drag and lift forces is built.The results show that drag force is dependent of the inclined angle when the other condi-tions are the same, but the lift force is decreasing with the inclined angle.Drag and lift forces are the horizontal and vertical components of the total force, respectively.And the ratio of drag and lift forces is just equal to the tangent value of the inclined angle.The dynamic friction angle is the quadratic function of velocity and inclined angle.This model can predict different case in different inclined angle and veloci-ty.

  5. Release of Extracellular Polymeric Substance and Disintegration of Anaerobic Granular Sludge under Reduced Sulfur Compounds-Rich Conditions

    Directory of Open Access Journals (Sweden)

    Takuro Kobayashi

    2015-07-01

    Full Text Available The effect of reduced form of sulfur compounds on granular sludge was investigated. Significant release of extracellular polymeric substance (EPS from the granular sludge occurred in the presence of sulfide and methanethiol according to various concentrations. Granular sludge also showed a rapid increase in turbidity and decrease in diameter in accordance with sulfide concentration during the long-term shaking, suggesting that the strength of the granules was reduced with high-concentration sulfide. A continuous experiment of up-flow anaerobic sludge blanket reactors with different concentrations of sulfide (10, 200, 500 mg-S/L influence demonstrated that the reactor fed with higher concentration of sulfide allowed more washout of small particle-suspended solid (SS content and soluble carbohydrate and protein, which were considered as EPS released from biofilm. Finally, the presence of sulfide negatively affected methane production, chemical oxygen demand removal and sludge retention in operational performance.

  6. Statistics of large contact forces in granular matter

    NARCIS (Netherlands)

    van Eerd, A.R.T.

    2008-01-01

    Granular materials such as sand have both liquid-like and solid-like properties similar to both liquids and solids. Dry sand in an hour-glass can flow just like water, while sand in a sand castle closely resembles a solid. Because of these interesting properties granular matter has received much att

  7. Factors influencing the density profiles of granular flux in a two-dimensional inclined channel

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The two-dimensional dilute granular flow on a smooth incline bounded by rough sidewalls is investigated experimentally, and the transverse density profiles of granular flux (ξ = ρ v) across the channel are measured. The results show that the transverse density profiles of granular flux are symmetric about the channel center and that the density of granular flux near the boundary is clearly lower than that of the center. There is a critical width of channel Wc for the transition of the density of granular flux. The density of granular flux near the boundary decays with the increasing of inclination (sinθ ) of the channel.

  8. Factors influencing the density profiles of granular flux in a two-dimensional inclined channel

    Institute of Scientific and Technical Information of China (English)

    BAO DeSong; ZHOU Ying; ZHANG XunSheng; TANG XiaoWei

    2009-01-01

    The two-dimensional dilute granular flow on a smooth incline bounded by rough sidewalls is investigated experimentally, and the transverse density profiles of granular flux (ξ=pv) across the channel are measured. The results show that the transverse density profiles of granular flux are symmetric about the channel center and that the density of granular flux near the boundary is clearly lower than that of the center. There is a critical width of channel Wc for the transition of the density of granular flux. The density of granular flux near the boundary decays with the increasing of inclination (sinθ) of the channel.

  9. Flow-Based Systems for Rapid and High-Precision Enzyme Kinetics Studies

    Directory of Open Access Journals (Sweden)

    Supaporn Kradtap Hartwell

    2012-01-01

    Full Text Available Enzyme kinetics studies normally focus on the initial rate of enzymatic reaction. However, the manual operation of steps of the conventional enzyme kinetics method has some drawbacks. Errors can result from the imprecise time control and time necessary for manual changing the reaction cuvettes into and out of the detector. By using the automatic flow-based analytical systems, enzyme kinetics studies can be carried out at real-time initial rate avoiding the potential errors inherent in manual operation. Flow-based systems have been developed to provide rapid, low-volume, and high-precision analyses that effectively replace the many tedious and high volume requirements of conventional wet chemistry analyses. This article presents various arrangements of flow-based techniques and their potential use in future enzyme kinetics applications.

  10. Transient Flow in Rapidly Filling Air-Entrapped Pipelines with Moving Boundaries

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yongliang; K. Vairavamoorthy

    2006-01-01

    A mathematical model is presented for transient flow in a rapidly filling pipeline with an entrapped air pocket. The influence of transient shear stress between the pipe wall and the flowing fluid is taken into account. A coordinate transformation technique is employed to generate adaptive moving meshes for the multiphase flow system as images of the time-independent computational meshes in auxiliary domains. The method of characteristics is used to reduce the coupled nonlinear hyperbolic partial differential equations governing the motion of the filling fluid, entrapped air, and blocking fluid to ordinary differential equations.Numerical solution of resulting equations shows that the transient shear stresses have only a small damping effect on the pressure fluctuations. The peak pressure in the entrapped air pocket decreases significantly with increasing initial entrapped air volume, but decreases slightly with increasing initial entrapped air pressure.

  11. Cystic Granular Cell Ameloblastoma

    OpenAIRE

    Thillaikarasi, Rathnavel; Balaji, Jayaram; Gupta, Bhawna; Ilayarja, Vadivel; Vani, Nandimandalam Venkata; Vidula, Balachander; Saravanan, Balasubramaniam; Ponniah, Irulandy

    2010-01-01

    Ameloblastoma is a locally aggressive benign epithelial odontogenic tumor, while unicystic ameloblastoma is a relatively less aggressive variant. Although rare in unicystic or cystic ameloblastoma, granular cell change in ameloblastoma is a recognized phenomenon. The purpose of the present article is to report a case of cystic granular cell ameloblastoma in 34-year old female.

  12. Developmental validation of a novel lateral flow strip test for rapid identification of human blood (Rapid Stain Identification--Blood).

    Science.gov (United States)

    Schweers, Brett A; Old, Jennifer; Boonlayangoor, P W; Reich, Karl A

    2008-06-01

    Human blood is the body fluid most commonly encountered at crime scenes, and blood detection may aid investigators in reconstructing what occurred during a crime. In addition, blood detection can help determine which items of evidence should be processed for DNA-STR testing. Unfortunately, many common substances can cause red-brown stains that resemble blood. Furthermore, many current human blood detection methods are presumptive and prone to false positive results. Here, the developmental validation of a new blood identification test, Rapid Stain Identification--Blood (RSID--Blood), is described. RSID--Blood utilizes two anti-glycophorin A (red blood cell membrane specific protein) monoclonal antibodies in a lateral flow strip test format to detect human blood. We present evidence demonstrating that this test is accurate, reproducible, easy to use, and highly specific for human blood. Importantly, RSID--Blood does not cross-react with ferret, skunk, or primate blood and exhibits no high-dose hook effect. Also, we describe studies on the sensitivity, body fluid specificity, and species specificity of RSID--Blood. In addition, we show that the test can detect blood from a variety of forensic exhibits prior to processing for DNA-STR analysis. In conclusion, we suggest that RSID--Blood is effective and useful for the detection of human blood on forensic exhibits, and offers improved blood detection when compared to other currently used methods.

  13. Modeling the Collisional-Plastic Stress Transition for Bin Discharge of Granular Material

    Science.gov (United States)

    Pannala, Sreekanth; Daw, C. Stuart; Finney, Charles E. A.; Benyahia, Sofiane; Syamlal, Madhava; O'Brien, Thomas J.

    2009-06-01

    We propose a heuristic model for the transition between collisional and frictional/plastic stresses in the flow of granular material. Our approach is based on a physically motivated, nonlinear `blending' function that produces a weighted average of the limiting stresses, depending on the local void fraction in the flow field. Previously published stress models are utilized to describe the behavior in the collisional (Lun et al., 1984) and quasi-static limits (Schaeffer, 1987 and Syamlal et al.., 1993). Sigmoidal and hyperbolic tangent functions are used to mimic the observed smooth yet rapid transition between the collisional and plastic stress zones. We implement our stress transition model in an open-source multiphase flow solver, MFIX (Multiphase Flow with Interphase eXchanges, www.mfix.org) and demonstrate its application to a standard bin discharge problem. The model's effectiveness is illustrated by comparing computational predictions to the experimentally derived Beverloo correlation. With the correct choice of function parameters, the model predicts bin discharge rates within the error margins of the Beverloo correlation and is more accurate than one of the alternative granular stress models proposed in the literature. Although a second granular stress model in the literature is also reasonably consistent with the Beverloo correlation, we propose that our alternative blending function is likely to be more adaptable to situations with more complex solids properties (e.g., `sticky' solids).

  14. Modeling the Collisional-Plastic Stress Transition for Bin Discharge of Granular Material

    Energy Technology Data Exchange (ETDEWEB)

    Pannala, Sreekanth [ORNL; Daw, C Stuart [ORNL; FINNEY, Charles E A [ORNL; Benyahia, S. [National Energy Technology Laboratory (NETL); Syamlal, M. [National Energy Technology Laboratory (NETL); O' Brien, T. J. [National Energy Technology Laboratory (NETL)

    2009-01-01

    We propose a heuristic model for the transition between collisional and frictional/plastic stresses in the flow of granular material. Our approach is based on a physically motivated, nonlinear blending function that produces a weighted average of the limiting stresses, depending on the local void fraction in the flow field. Previously published stress models are utilized to describe the behavior in the collisional (Lun et al., 1984) and quasi-static limits (Schaeffer, 1987 and Syamlal et al., 1993). Sigmoidal and hyperbolic tangent functions are used to mimic the observed smooth yet rapid transition between the collisional and plastic stress zones. We implement our stress transition model in an opensource multiphase flow solver, MFIX (Multiphase Flow with Interphase eXchanges, www.mfix.org) and demonstrate its application to a standard bin discharge problem. The model s effectiveness is illustrated by comparing computational predictions to the experimentally derived Beverloo correlation. With the correct choice of function parameters, the model predicts bin discharge rates within the error margins of the Beverloo correlation and is more accurate than one of the alternative granular stress models proposed in the literature. Although a second granular stress model in the literature is also reasonably consistent with the Beverloo correlation, we propose that our alternative blending function is likely to be more adaptable to situations with more complex solids properties (e.g., sticky solids).

  15. Long-term performance of side-stream deammonification in a continuous flow granular-activated sludge process for nitrogen removal from high ammonium wastewater.

    Science.gov (United States)

    Rezania, Babak; Mavinic, Donald S; Kelly, Harlan G

    2015-01-01

    An innovative granular sludge deammonification system was incorporated into a conventional-activated sludge process. The process incorporated an internal baffle in the bioreactor for continuous separation of granular biomass from flocculent biomass, which allowed for controlling the solids retention time of flocculent sludge. The process was evaluated for ammonium removal from municipal digested sludge dewatering centrate under various operating conditions lasting over 450 days. The process successfully removed, on average, 90% of the ammonium from centrate at various ammonium loading reaching 1.4 kg/m³d at 20 hours hydraulic retention time. Controlling the retention time of the flocculent biomass and maintaining low nitrite concentration were both found to be effective for nitrite oxidizing bacteria management, resulting in a low nitrate concentration (below 50 mg/L) over a wide range of flocculent biomass concentration in the bioreactor.

  16. Water Quality and Environmental Flow Management in Rapidly Urbanizing Shenzhen Estuary Area, China

    Science.gov (United States)

    Qin, H.; Su, Q.

    2011-12-01

    Shenzhen estuary is located in a rapidly urbanizing coastal region of Southeast China, and forms the administrative border between mainland China and Hong Kong. It receives the waters of the Shenzhen River, where it enters the Deep Bay. The estuary has great ecological importance with the internationally recognized mangrove wetlands, which provides a habitat for some rare and endangered waterfowl and migratory birds.Water quality in the esturay has deteriorated not only due to increasing wastewater discharges from domestic and industrial sources, but also as a consequence of decreasing base environmental flow during rapid urbanization in the Shenzhen River catchment since 1980s. Measures to improve water quality of the estuary include not only reducing pollutant inputs by intercepting wastewater, but also increasing environmental flow by reusing reclaimed wastewater or withdrawing nearshore seawater into the river. However, salinity alternation due to flow increase is deemed to have impacts on the mangrove wetland ecosystem. In this paper, Environmental Fluid Dynamics Code (EFDC) is used to simulate hydrodynamics, salinity, and water quality condition in the Shenzhen estuary. After calibration and validation, the model is used to evaluate effects of various control measures on water quality improvement and salinity alteration in the estuary. The results indicate that implementing different measures independently does not reach the goals of water quality improvement; furthermore, increasing environmental flow by importing nearshore seawater may greatly increase the salinity in the Shenzhen River, destroy the fresh ecosystem of the river and have non-negligible impacts on the mangrove wetland ecosystem. Based on the effectiveness and impacts of the measures, an integrated measure, which combine pollutant loads reduction and environmental flow increase by reusing reclaimed wastewater, is proposed to achieve water environmental sustainability in the study area.

  17. Experimental investigation on steady granular flows interacting with an obstacle down an inclined channel: study of the dead zone upstream from the obstacle. Application to interaction between dense snow avalanches and defence structures

    Directory of Open Access Journals (Sweden)

    T. Faug

    2002-01-01

    Full Text Available An experimental investigation with dry granular flows passing over an obstacle down a rough inclined channel has been performed. The aim is to improve our understanding of the interaction between dense snow avalanches and defence structures. Specific attention was directed to the study of the zone of influence upstream from the obstacle, linked to the formation of a dead zone. The dead zone length L was systematically measured as a function of the obstacle height H and the channel inclination θ, for several discharges. In a whole range of channel inclinations, all the data are shown to collapse into a single curve when properly scaled. The scaling is based on the introduction of a theoretical deposit length (depending on H, θ and the internal friction angle of the material, φ and a Froude number of the flow depending on the obstacle height.

  18. Rapid Determination of Optimal Conditions in a Continuous Flow Reactor Using Process Analytical Technology

    Directory of Open Access Journals (Sweden)

    Michael F. Roberto

    2013-12-01

    Full Text Available Continuous flow reactors (CFRs are an emerging technology that offer several advantages over traditional batch synthesis methods, including more efficient mixing schemes, rapid heat transfer, and increased user safety. Of particular interest to the specialty chemical and pharmaceutical manufacturing industries is the significantly improved reliability and product reproducibility over time. CFR reproducibility can be attributed to the reactors achieving and maintaining a steady state once all physical and chemical conditions have stabilized. This work describes the implementation of a smart CFR with univariate physical and multivariate chemical monitoring that allows for rapid determination of steady state, requiring less than one minute. Additionally, the use of process analytical technology further enabled a significant reduction in the time and cost associated with offline validation methods. The technology implemented for this study is chemistry and hardware agnostic, making this approach a viable means of optimizing the conditions of any CFR.

  19. Granular gas dynamics

    CERN Document Server

    Brilliantov, Nikolai

    2003-01-01

    While there is not yet any general theory for granular materials, significant progress has been achieved for dilute systems, also called granular gases. The contributions in this book address both the kinetic approach one using the Boltzmann equation for dissipative gases as well as the less established hydrodynamic description. The last part of the book is devoted to driven granular gases and their analogy with molecular fluids. Care has been taken so as to present the material in a pedagogical and self-contained way and this volume will thus be particularly useful to nonspecialists and newcomers to the field.

  20. Congenital granular cell epulis.

    Science.gov (United States)

    Conrad, Rachel; Perez, Mia C N

    2014-01-01

    Congenital granular cell epulis is a rarely reported lesion of unknown histogenesis with a strong predilection for the maxillary alveolar ridge of newborn girls. Microscopically, it demonstrates nests of polygonal cells with granular cytoplasm, a prominent capillary network, and attenuated overlying squamous epithelium. The lesion lacks immunoreactivity for S-100, laminin, chromogranin, and most other markers except neuron-specific enolase and vimentin. Through careful observation of its unique clinical, histopathologic, and immunohistochemical features, this lesion can be distinguished from the more common adult granular cell tumor as well as other differential diagnoses.

  1. A kinetic approach to granular gases

    OpenAIRE

    Puglisi, A.; Loreto, V.; Marconi, U. Marini Bettolo; Vulpiani, A.

    1998-01-01

    We address the problem of the so-called ``granular gases'', i.e. gases of massive particles in rapid movement undergoing inelastic collisions. We introduce a class of models of driven granular gases for which the stationary state is the result of the balance between the dissipation and the random forces which inject energies. These models exhibit a genuine thermodynamic limit, i.e. at fixed density the mean values of kinetic energy and dissipated energy per particle are independent of the num...

  2. Rapid identification of Yersinia pestis and Brucella melitensis by chip-based continuous flow PCR

    Science.gov (United States)

    Dietzsch, Michael; Hlawatsch, Nadine; Melzer, Falk; Tomaso, Herbert; Gärtner, Claudia; Neubauer, Heinrich

    2012-06-01

    To combat the threat of biological agents like Yersinia pestis and Brucella melitensis in bioterroristic scenarios requires fast, easy-to-use and safe identification systems. In this study we describe a system for rapid amplification of specific genetic markers for the identification of Yersinia pestis and Brucella melitensis. Using chip based PCR and continuous flow technology we were able to amplify the targets simultaneously with a 2-step reaction profile within 20 minutes. The subsequent analysis of amplified fragments by standard gel electrophoresis requires another 45 minutes. We were able to detect both pathogens within 75 minutes being much faster than most other nucleic acid amplification technologies.

  3. Anaerobic granular sludge and biofilm reactors

    DEFF Research Database (Denmark)

    Skiadas, Ioannis V.; Gavala, Hariklia N.; Schmidt, Jens Ejbye

    2003-01-01

    by the immobilization of the biomass, which forms static biofilms, particle-supported biofilms, or granules depending on the reactor's operational conditions. The advantages of the high-rate anaerobic digestion over the conventional aerobic wastewater treatment methods has created a clear trend for the change......-rate anaerobic treatment systems based on anaerobic granular sludge and biofilm are described in this chapter. Emphasis is given to a) the Up-flow Anaerobic Sludge Blanket (UASB) systems, b) the main characteristics of the anaerobic granular sludge, and c) the factors that control the granulation process...

  4. Nonequilibrium Statistical Mechanics and Hydrodynamics for a Granular Fluid

    OpenAIRE

    Dufty, James W.

    2007-01-01

    Granular fluids consist of collections of activated mesoscopic or macroscopic particles (e.g., powders or grains) whose flows often appear similar to those of normal fluids. To explore the qualitative and quantitative description of these flows an idealized model for such fluids, a system of smooth inelastic hard spheres, is considered. The single feature distinguishing granular and normal fluids being explored in this way is the inelasticity of collisions. The dominant differences observed i...

  5. The Microstructural Response of Granular Soil Under Uniaxial Strain

    Science.gov (United States)

    1993-10-01

    contacts or granular motions will provide insight into more accurate modeling of the material response. The microstructural theory can be directly...use of a flow rule, the ramifications of using an associated or nonassociated flow rule for modeling the response of granular materials will also be...plasticity-based models has been developed over the past 30 yr. Common variations include perfect (ideal) plasticity, hypoelasticity , and viscoplasticity

  6. A novel, rapid method to quantify intraplatelet calcium dynamics by ratiometric flow cytometry.

    Directory of Open Access Journals (Sweden)

    Alice Assinger

    Full Text Available Cytosolic free calcium ions represent important second-messengers in platelets. Therefore, quantitative measurement of intraplatelet calcium provides a popular and very sensitive tool to evaluate platelet activation and reactivity. Current protocols for determination of intracellular calcium concentrations in platelets have a number of limitations. Cuvette-based methods do not allow measurement of calcium flux in complex systems, such as whole blood, and therefore require isolation steps that potentially interfere with platelet activation. Flow cytometry has the potential to overcome this limitation, but to date the application of calibrated, quantitative readout of calcium kinetics has only been described for Indo-1. As excitation of Indo-1 requires a laser in the ultraviolet range, such measurements cannot be performed with a standard flow cytometer. Here, we describe a novel, rapid calibration method for ratiometric calcium measurement in platelets using both Ar(+-laser excited fluorescence dyes Fluo-4 and Fura Red. We provide appropriate equations that allow rapid quantification of intraplatelet calcium fluxes by measurement of only two standardisation buffers. We demonstrate that this method allows quantitative calcium measurement in platelet rich plasma as well as in whole blood. Further, we show that this method prevents artefacts due to platelet aggregate formation and is therefore an ideal tool to determine basal and agonist induced calcium kinetics.

  7. Erosion dynamics of a wet granular medium.

    Science.gov (United States)

    Lefebvre, Gautier; Jop, Pierre

    2013-09-01

    Liquid may give strong cohesion properties to a granular medium, and confer a solidlike behavior. We study the erosion of a fixed circular aggregate of wet granular matter subjected to a flow of dry grains inside a half-filled rotating drum. During the rotation, the dry grains flow around the fixed obstacle. We show that its diameter decreases linearly with time for low liquid content, as wet grains are pulled out of the aggregate. This erosion phenomenon is governed by the properties of the liquids. The erosion rate decreases exponentially with the surface tension while it depends on the viscosity to the power -1. We propose a model based on the force fluctuations arising inside the flow, explaining both dependencies: The capillary force acts as a threshold and the viscosity controls the erosion time scale. We also provide experiments using different flowing grains, confirming our model.

  8. Discrete particle modeling of granular temperature distribution in a bubbling fluidized bed

    Institute of Scientific and Technical Information of China (English)

    Yurong He; Tianyu Wang; Niels Deen; Martin van Sint Annaland; Hans Kuipers; Dongsheng Wen

    2012-01-01

    The discrete hard sphere particle model (DPM) is applied in this work to study numerically the distributions of particle and bubble granular temperatures in a bubbling fluidized bed.The dimensions of the bed and other parameters are set to correspond to those of Müller et al.(2008).Various drag models and operational parameters are investigated to find their influence on particle and bubble granular temperatures.Various inlet superficial gas velocities are used in this work to obtain their effect on flow characteristics.It is found that the superficial gas velocity has the most important effect on granular temperatures including bubble granular temperature,particle translational granular temperature and particle rotational granular temperature.The drag force model affects more seriously the large scale variables such as the bubble granular temperature.Restitution coefficient influences all granular temperatures to some degree.Simulation results are compared with experimental results by Müller et al.(2008) showing reasonable agreement.

  9. Rapid detection of Bacillus anthracis by γ phage amplification and lateral flow immunochromatography.

    Science.gov (United States)

    Cox, Christopher R; Jensen, Kirk R; Mondesire, Roy R; Voorhees, Kent J

    2015-11-01

    New, rapid point-of-need diagnostic methods for Bacillus anthracis detection can enhance civil and military responses to accidental or deliberate dispersal of anthrax as a biological weapon. Current laboratory-based methods for clinical identification of B. anthracis require 12 to 120h, and are confirmed by plaque assay using the well-characterized γ typing phage, which requires an additional minimum of 24h for bacterial culture. To reduce testing time, the natural specificity of γ phage amplification was investigated in combination with lateral flow immunochromatography (LFI) for rapid, point-of-need B. anthracis detection. Phage-based LFI detection of B. anthracis Sterne was validated over a range of bacterial and phage concentrations with optimal detection achieved in as little as 2h from the onset of amplification with a threshold sensitivity of 2.5×10(4)cfu/mL. The novel use of γ phage amplification detected with a simple, inexpensive LFI assay provides a rapid, sensitive, highly accurate, and field-deployable method for diagnostic ID of B. anthracis in a fraction of the time required by conventional techniques, and without the need for extensive laboratory culture.

  10. Determination of rapid chlorination rate constants by a stopped-flow spectrophotometric competition kinetics method.

    Science.gov (United States)

    Song, Dean; Liu, Huijuan; Qiang, Zhimin; Qu, Jiuhui

    2014-05-15

    Free chlorine is extensively used for water and wastewater disinfection nowadays. However, it still remains a big challenge to determine the rate constants of rapid chlorination reactions although competition kinetics and stopped-flow spectrophotometric (SFS) methods have been employed individually to investigate fast reaction kinetics. In this work, we proposed an SFS competition kinetics method to determine the rapid chlorination rate constants by using a common colorimetric reagent, N,N-diethyl-p-phenylenediamine (DPD), as a reference probe. A kinetic equation was first derived to estimate the reaction rate constant of DPD towards chlorine under a given pH and temperature condition. Then, on that basis, an SFS competition kinetics method was proposed to determine directly the chlorination rate constants of several representative compounds including tetracycline, ammonia, and four α-amino acids. Although Cl2O is more reactive than HOCl, its contribution to the overall chlorination kinetics of the test compounds could be neglected in this study. Finally, the developed method was validated through comparing the experimentally measured chlorination rate constants of the selected compounds with those obtained or calculated from literature and analyzing with Taft's correlation as well. This study demonstrates that the SFS competition kinetics method can measure the chlorination rate constants of a test compound rapidly and accurately.

  11. Streamwise-body-force-model for rapid simulation combining internal and external flow fields

    Directory of Open Access Journals (Sweden)

    Cui Rong

    2016-10-01

    Full Text Available A streamwise-body-force-model (SBFM is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The validation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure performance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tunnel test results. Results show that to reach the goal of rapid integrated simulation combining internal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.

  12. Rapid detection of genetically modified organisms on a continuous-flow polymerase chain reaction microfluidics.

    Science.gov (United States)

    Li, Yuyuan; Xing, Da; Zhang, Chunsun

    2009-02-01

    The ability to perform DNA amplification on a microfluidic device is very appealing. In this study, a compact continuous-flow polymerase chain reaction (PCR) microfluidics was developed for rapid analysis of genetically modified organisms (GMOs) in genetically modified soybeans. The device consists of three pieces of copper and a transparent polytetrafluoroethylene capillary tube embedded in the spiral channel fabricated on the copper. On this device, the P35S and Tnos sequences were successfully amplified within 9min, and the limit of detection of the DNA sample was estimated to be 0.005 ng microl(-1). Furthermore, a duplex continuous-flow PCR was also reported for the detection of the P35S and Tnos sequences in GMOs simultaneously. This method was coupled with the intercalating dye SYBR Green I and the melting curve analysis of the amplified products. Using this method, temperature differences were identified by the specific melting temperature values of two sequences, and the limit of detection of the DNA sample was assessed to be 0.01 ng microl(-1). Therefore, our results demonstrated that the continuous-flow PCR assay could discriminate the GMOs in a cost-saving and less time-consuming way.

  13. Field-Usable Lateral Flow Immunoassay for the Rapid Detection of White Spot Syndrome Virus (WSSV)

    Science.gov (United States)

    Kulabhusan, Prabir Kumar; Rajwade, Jyutika M.; Sugumar, Vimal; Taju, Gani; Sahul Hameed, A. S.

    2017-01-01

    Background White spot disease (WSD), a major threat to sustainable aquaculture worldwide, is caused by White spot syndrome virus (WSSV). The diagnosis of WSD relies heavily on molecular detection of the virus by one-step PCR. These procedures are neither field-usable nor rapid enough considering the speed at which the virus spreads. Thus, development of a rapid, reliable and field-usable diagnostic method for the detection of WSSV infection is imperative to prevent huge economic losses. Methods/Principal Findings Here, we report on the development of a lateral flow immunoassay (LFIA) employing gold nanoparticles conjugated to a polyclonal antibody against VP28 (envelope protein of WSSV). The LFIA detected WSSV in ~20 min and showed no cross-reactivity with other shrimp viruses, viz. Monodon Baculovirus (MBV), Hepatopancreatic parvovirus (HPV) and Infectious Hypodermal and Hematopoietic Necrosis virus (IHHNV). The limit of detection (LOD) of the assay, as determined by real-time PCR, was 103 copies of WSSV. In a time course infectivity experiment, ~104 WSSV particles were injected in Litopenaeus vannamei. The LFIA could rapidly (~ 20 min) detect the virus in different tissues after 3 h (hemolymph), 6 h (gill tissue) and 12 h (head soft tissue, eye stalk, and pleopod) of infection. Based on these findings, a validation study was performed using 75 field samples collected from different geographical locations in India. The LFIA results obtained were compared with the conventional “gold standard test”, viz. one-step PCR. The analysis of results in 2x2 matrix indicated very high sensitivity (100%) and specificity (96.77%) of LFIA. Similarly, Cohen’s kappa coefficient of 0.983 suggested "very good agreement” between the developed LFIA and the conventional one-step PCR. Conclusion The LFIA developed for the rapid detection of WSSV has an excellent potential for use in the field and could prove to be a boon to the aquaculture industry. PMID:28046005

  14. Plowing of granular surface by a vertical blade

    Science.gov (United States)

    Judge, Vachitar Singh; Dressaire, Emilie; Sauret, Alban

    2016-11-01

    The interaction of a blade with a layer of fluid is an important industrial problem involved in coating of substrates, removing of snow, plowing the fields for agriculture. Most experimental and theoretical work has focused on the drag and lift forces on plowing blade as it is dragged on a granular surface or studying the flow of the fluid while plowing. However the study of deformation of a granular surface by a vertical plow blade has received less attention, despite significant practical and fundamental implications. In this study, we investigate experimentally the behavior of a granular substrate as a vertical plow blade of finite width is translated at constant speed. The vertical blade directs the granular material outward and sand piles form on either sides. We characterize the dynamics of plowing by measuring and rationalizing the influence of the width of the vertical plow blade, the height of the plow blade, and the depth granular substrate.

  15. Identification of dominant flow structures in rapidly rotating convection of liquid metals using Dynamic Mode Decomposition

    Science.gov (United States)

    Horn, S.; Schmid, P. J.; Aurnou, J. M.

    2016-12-01

    The Earth's metal core acts as a dynamo whose efficiency in generating and maintaining the magnetic field is essentially determined by the rotation rate and the convective motions occurring in its outer liquid part. For the description of the primary physics in the outer core the idealized system of rotating Rayleigh-Bénard convection is often invoked, with the majority of studies considering only working fluids with Prandtl numbers of Pr ≳ 1. However, liquid metals are characterized by distinctly smaller Prandtl numbers which in turn result in an inherently different type of convection. Here, we will present results from direct numerical simulations of rapidly rotating convection in a fluid with Pr ≈ 0.025 in cylindrical containers and Ekman numbers as low as 5 × 10-6. In this system, the Coriolis force is the source of two types of inertial modes, the so-called wall modes, that also exist at moderate Prandtl numbers, and cylinder-filling oscillatory modes, that are a unique feature of small Prandtl number convection. The obtained flow fields were analyzed using the Dynamic Mode Decomposition (DMD). This technique allows to extract and identify the structures that govern the dynamics of the system as well as their corresponding frequencies. We have investigated both the regime where the flow is purely oscillatory and the regime where wall modes and oscillatory modes co-exist. In the purely oscillatory regime, high and low frequency oscillatory modes characterize the flow. When both types of modes are present, the DMD reveals that the wall-attached modes dominate the flow dynamics. They precess with a relatively low frequency in retrograde direction. Nonetheless, also in this case, high frequency oscillations have a significant contribution.

  16. Bienzymatic Biosensor for Rapid Detection of Aspartame by Flow Injection Analysis

    Directory of Open Access Journals (Sweden)

    Maria-Cristina Radulescu

    2014-01-01

    Full Text Available A rapid, simple and stable biosensor for aspartame detection was developed. Alcohol oxidase (AOX, carboxyl esterase (CaE and bovine serum albumin (BSA were immobilised with glutaraldehyde (GA onto screen-printed electrodes modified with cobalt-phthalocyanine (CoPC. The biosensor response was fast. The sample throughput using a flow injection analysis (FIA system was 40 h−1 with an RSD of 2.7%. The detection limits for both batch and FIA measurements were 0.1 µM for methanol and 0.2 µM for aspartame, respectively. The enzymatic biosensor was successfully applied for aspartame determination in different sample matrices/commercial products (liquid and solid samples without any pre-treatment step prior to measurement.

  17. Bienzymatic biosensor for rapid detection of aspartame by flow injection analysis.

    Science.gov (United States)

    Radulescu, Maria-Cristina; Bucur, Bogdan; Bucur, Madalina-Petruta; Radu, Gabriel Lucian

    2014-01-09

    A rapid, simple and stable biosensor for aspartame detection was developed. Alcohol oxidase (AOX), carboxyl esterase (CaE) and bovine serum albumin (BSA) were immobilised with glutaraldehyde (GA) onto screen-printed electrodes modified with cobalt-phthalocyanine (CoPC). The biosensor response was fast. The sample throughput using a flow injection analysis (FIA) system was 40 h⁻¹ with an RSD of 2.7%. The detection limits for both batch and FIA measurements were 0.1 µM for methanol and 0.2 µM for aspartame, respectively. The enzymatic biosensor was successfully applied for aspartame determination in different sample matrices/commercial products (liquid and solid samples) without any pre-treatment step prior to measurement.

  18. Rapidity and pt dependence of identified-particle elliptic flow at RHIC

    Science.gov (United States)

    Sanders, S. J.; BRAHMS Collaboration

    2007-08-01

    Elliptic flow has been measured by the BRAHMS experiment as a function of transverse momentum and pseudorapidity for the Au+Au reaction at \\sqrt{s_{NN}} = 200 GeV. Identified-particle v2(η, pt) values were obtained with the two BRAHMS spectrometers at pseudorapidities ηap 0, 1 and 3.4. The results show that the differential v2(η, pt) values for a given particle type are essentially constant over the covered pseudorapidity range. It is suggested that the dominant cause of the observed fall-off of the integral v2 values going away from mid-rapidity is a corresponding softening of the particle spectra.

  19. Evaluating Energy Flux in Vibrofluidized Granular Bed

    Directory of Open Access Journals (Sweden)

    N. A. Sheikh

    2013-01-01

    Full Text Available Granular flows require sustained input of energy for fluidization. A level of fluidization depends on the amount of heat flux provided to the flow. In general, the dissipation of the grains upon interaction balances the heat inputs and the resultant flow patterns can be described using hydrodynamic models. However, with the increase in packing fraction, the heat fluxes prediction of the cell increases. Here, a comparison is made for the proposed theoretical models against the MD simulations data. It is observed that the variation of packing fraction in the granular cell influences the heat flux at the base. For the elastic grain-base interaction, the predictions vary appreciably compared to MD simulations, suggesting the need to accurately model the velocity distribution of grains for averaging.

  20. Low Mach number theory of freely cooling granular gases

    CERN Document Server

    Meerson, Baruch; Vilenkin, Arkady

    2007-01-01

    We use hydrodynamic equations to investigate the dynamics of a freely cooling dilute granular gas with nearly elastic particle collisions. We assume a narrow channel geometry and focus on the regime where the sound travel time through the system is much shorter than the typical cooling time of the gas. As a result, the pressure rapidly becomes almost homogeneous, while the Mach number is small. Eliminating the sound waves and employing Lagrangian coordinates, we reduce the full hydrodynamics to a single nonlinear/nonlocal equation of a reaction-diffusion type. This equation describes a broad class of flows and, in particular, can follow the development of strongly nonlinear states during clustering instability. Without heat diffusion, the reduced equation is exactly soluble and develops a finite-time density blowup with the same local features as those exhibited by the recently found family of exact solutions of the full set of ideal hydrodynamic equations (Fouxon et al. 2007). The heat diffusion, however, ar...

  1. Flow cytometry for rapid detection of Salmonella spp. in seed sprouts

    Directory of Open Access Journals (Sweden)

    Bledar Bisha

    2014-12-01

    Full Text Available Seed sprouts (alfalfa, mung bean, radish, etc. have been implicated in several recent national and international outbreaks of salmonellosis. Conditions used for sprouting are also conducive to the growth of Salmonella. As a result, this pathogen can quickly grow to very high cell densities during sprouting without any detectable organoleptic impact. Seed sprouts typically also support heavy growth (~108 CFU g−1 of a heterogeneous microbiota consisting of various bacterial, yeast, and mold species, often dominated by non-pathogenic members of the family Enterobacteriaceae. This heavy background may present challenges to the detection of Salmonella, especially if this pathogen is present in relatively low numbers. We combined DNA-based fluorescence in situ hybridization (FISH with flow cytometry (FCM for the rapid molecular detection of Salmonella enterica ser. Typhimurium in artificially contaminated alfalfa and other seed sprouts. Components of the assay included a set of cooperatively binding probes, a chemical blocking treatment intended to reduce non-specific background, and sample concentration via tangential flow filtration (TFF. We were able to detect S. Typhimurium in sprout wash at levels as low as 103 CFU ml−1 sprout wash (104 CFU g−1 sprouts against high microbial backgrounds (~108 CFU g−1 sprouts. Hybridization times were typically 30 min, with additional washing, but we ultimately found that S. Typhimurium could be readily detected using hybridization times as short as 2 min, without a wash step. These results clearly demonstrate the potential of combined DNA-FISH and FCM for rapid detection of Salmonella in this challenging food matrix and provide industry with a useful tool for compliance with sprout production standards proposed in the Food Safety Modernization Act (FSMA.

  2. Localized fluidization in a granular medium.

    Science.gov (United States)

    Philippe, P; Badiane, M

    2013-04-01

    We present here experimental results on the progressive development of a fluidized zone in a bed of grains, immersed in a liquid, under the effect of a localized upward flow injected through a small orifice at the bottom of the bed. Visualization inside the model granular medium consisting of glass beads is made possible by the combined use of two optical techniques: refractive index matching between the liquid and the beads and planar laser-induced fluorescence. Gradually increasing the injection rate, three regimes are successively observed: static bed, fluidized cavity that does not open to the upper surface of the granular bed, and finally fluidization over the entire height of the granular bed inside a fluidized chimney. The phase diagram is plotted and partially interpreted using a model previously developed by Zoueshtiagh and Merlen [F. Zoueshtiagh and A. Merlen, Phys. Rev. E 75, 053613 (2007)]. A typical sequence, where the flow rate is first increased and then decreased back to zero, reveals a strong hysteretic behavior since the stability of the fluidized cavity is considerably strengthened during the defluidization phase. This effect can be explained by the formation of force arches within the granular packing when the chimney closes up at the top of the bed. A study of the expansion rate of the fluidized cavity was also conducted as well as the analysis of the interaction between two injection orifices with respect to their spacing.

  3. Granular materials interacting with thin flexible rods

    Science.gov (United States)

    Neto, Alfredo Gay; Campello, Eduardo M. B.

    2017-04-01

    In this work, we develop a computational model for the simulation of problems wherein granular materials interact with thin flexible rods. We treat granular materials as a collection of spherical particles following a discrete element method (DEM) approach, while flexible rods are described by a large deformation finite element (FEM) rod formulation. Grain-to-grain, grain-to-rod, and rod-to-rod contacts are fully permitted and resolved. A simple and efficient strategy is proposed for coupling the motion of the two types (discrete and continuum) of materials within an iterative time-stepping solution scheme. Implementation details are shown and discussed. Validity and applicability of the model are assessed by means of a few numerical examples. We believe that robust, efficiently coupled DEM-FEM schemes can be a useful tool to the simulation of problems wherein granular materials interact with thin flexible rods, such as (but not limited to) bombardment of grains on beam structures, flow of granular materials over surfaces covered by threads of hair in many biological processes, flow of grains through filters and strainers in various industrial segregation processes, and many others.

  4. Granular materials interacting with thin flexible rods

    Science.gov (United States)

    Neto, Alfredo Gay; Campello, Eduardo M. B.

    2016-01-01

    In this work, we develop a computational model for the simulation of problems wherein granular materials interact with thin flexible rods. We treat granular materials as a collection of spherical particles following a discrete element method (DEM) approach, while flexible rods are described by a large deformation finite element (FEM) rod formulation. Grain-to-grain, grain-to-rod, and rod-to-rod contacts are fully permitted and resolved. A simple and efficient strategy is proposed for coupling the motion of the two types (discrete and continuum) of materials within an iterative time-stepping solution scheme. Implementation details are shown and discussed. Validity and applicability of the model are assessed by means of a few numerical examples. We believe that robust, efficiently coupled DEM-FEM schemes can be a useful tool to the simulation of problems wherein granular materials interact with thin flexible rods, such as (but not limited to) bombardment of grains on beam structures, flow of granular materials over surfaces covered by threads of hair in many biological processes, flow of grains through filters and strainers in various industrial segregation processes, and many others.

  5. Micro-macro and rheology in sheared granular matter

    NARCIS (Netherlands)

    Singh, Abhinendra

    2014-01-01

    Soil, made up of countless interacting grains is a perfect example of granular materials. When soil is sheared, the flow is confined to narrow regions called flowing zones. In this thesis, DEM simulations are used to study the flowing zones induced by the geometry called the splitbottom geometry, wi

  6. A Rapid, Multiplexed, High-Throughput Flow-Through Membrane Immunoassay: A Convenient Alternative to ELISA

    Directory of Open Access Journals (Sweden)

    Gonzalo J. Domingo

    2013-04-01

    Full Text Available This paper describes a rapid, high-throughput flow-through membrane immunoassay (FMIA platform. A nitrocellulose membrane was spotted in an array format with multiple capture and control reagents for each sample detection area, and assay steps were carried out by sequential aspiration of sample and reagents through each detection area using a 96-well vacuum manifold. The FMIA provides an alternate assay format with several advantages over ELISA. The high surface area of the membrane permits high label concentration using gold labels, and the small pores and vacuum control provide rapid diffusion to reduce total assay time to ~30 min. All reagents used in the FMIA are compatible with dry storage without refrigeration. The results appear as colored spots on the membrane that can be quantified using a flatbed scanner. We demonstrate the platform for detection of IgM specific to lipopolysaccharides (LPS derived from Salmonella Typhi. The FMIA format provides analytical results comparable to ELISA in less time, provides integrated assay controls, and allows compensation for specimen-to-specimen variability in background, which is a particular challenge for IgM assays.

  7. Stopped-flow ultra-rapid-scanning Fourier transform infrared spectroscopy on the millisecond time scale.

    Science.gov (United States)

    Reback, Matthew L; Roske, Christopher W; Bitterwolf, Thomas E; Griffiths, Peter R; Manning, Christopher J

    2010-08-01

    Full-range mid-infrared spectra were measured during the reaction of CpCo(CO)(2) with nitrosyl chloride by interfacing a rapid-mixing stopped-flow device with an ultra-rapid-scanning Fourier transform infrared (FT-IR) spectrometer having a temporal resolution of 5 ms. Changes to the data acquisition hardware of this spectrometer now allow a sequence of well over 2000 spectra to be collected without interruption. Two transient species were observed spectroscopically during the first 500 ms of the reaction of CpCo(CO)(2) with nitrosyl chloride. The shortest-lived species that was observed, [CpCo(CO)(2)(NO)](+), had a half-life of approximately 20 ms at 25 degrees C and approximately 70 ms at 10 degrees C. This intermediate transformed into a longer-lived (approximately 0.5 s) intermediate, CpCo(NO)Cl. Potential intermediate species with one CO and one NO ligand, such as [CpCo(CO)(NO)](+) and CpCo(CO)(NO)Cl, were not observed, although the possibility that they exist cannot be ruled out.

  8. Dual-Quantum-Dots-Labeled Lateral Flow Strip Rapidly Quantifies Procalcitonin and C-reactive Protein

    Science.gov (United States)

    Qi, XiaoPing; Huang, YunYe; Lin, ZhongShi; Xu, Liang; Yu, Hao

    2016-03-01

    In the article, a dual-quantum-dots-labeled (dual-QDs-labeled) lateral flow strip (LFS) method was developed for the simultaneous and rapid quantitative detection of procalcitonin (PCT) and C-reactive protein (CRP) in the blood. Two QD-antibody conjugates with different fluorescence emission spectra were produced and sprayed on the LFS to capture PCT and CRP in the blood. Furthermore, a double antibody sandwich method for PCT and, meanwhile, a competitive inhibition method for CRP were employed in the LFS. For PCT and CRP in serum assayed by the dual-QDs-labeled LFS, their detection sensitivities reached 0.1 and 1 ng/mL, respectively, and their linear quantitative detection ranges were from 0.3 to 200 ng/mL and from 50 to 250 μg/mL, respectively. There was little evidence that the PCT and CRP assays would be interfered with each other. The correlations for testing CRP and PCT in clinical samples were 99.75 and 97.02 %, respectively, between the dual-QDs-labeled LFS we developed and commercial methods. The rapid quantification of PCT and CRP on dual-QDs-labeled LFS is of great clinical value to distinguish inflammation, bacterial infection, or viral infection and to provide guidance for the use of antibiotics or other medicines.

  9. Shaken Granular Lasers

    CERN Document Server

    Folli, Viola; Leuzzi, Luca; Conti, Claudio

    2012-01-01

    Granular materials have been studied for decades, also driven by industrial and technological applications. These very simple systems, composed by agglomerations of mesoscopic particles, are characterized, in specific regimes, by a large number of metastable states and an extreme sensitivity (e.g., in sound transmission) on the arrangement of grains; they are not substantially affected by thermal phenomena, but can be controlled by mechanical solicitations. Laser emission from shaken granular matter is so far unexplored; here we provide experimental evidence that it can be affected and controlled by the status of motion of the granular, we also find that competitive random lasers can be observed. We hence demonstrate the potentialities of gravity affected moving disordered materials for optical applications, and open the road to a variety of novel interdisciplinary investigations, involving modern statistical mechanics and disordered photonics.

  10. Shaken granular lasers.

    Science.gov (United States)

    Folli, Viola; Puglisi, Andrea; Leuzzi, Luca; Conti, Claudio

    2012-06-15

    Granular materials have been studied for decades, driven by industrial and technological applications. These very simple systems, composed of agglomerations of mesoscopic particles, are characterized, in specific regimes, by a large number of metastable states and an extreme sensitivity (e.g., in sound transmission) to the arrangement of grains; they are not substantially affected by thermal phenomena, but can be controlled by mechanical solicitations. Laser emission from shaken granular matter is so far unexplored. Here we provide experimental evidence that laser emission can be affected and controlled by the status of the motion of the granular material; we also find that competitive random lasers can be observed. We hence demonstrate the potentialities of gravity-affected moving disordered materials for optical applications, and open the road to a variety of novel interdisciplinary investigations, involving modern statistical mechanics and disordered photonics.

  11. A nonlinear self-similar solution to barotropic flow over rapidly varying topography

    Science.gov (United States)

    Ibanez, Ruy; Kuehl, Joseph

    2016-11-01

    Beginning from the Shallow Water Equations (SWE), a nonlinear self-similar analytic solution is derived for barotropic flow over rapidly varying topography. We study conditions relevant to the ocean slope where the flow is dominated by Earth's rotation and topography. Attention is paid to the northern Gulf of Mexico slope with application to pollutant dispersion and the Norwegian Coastal Current which sheds eddies into the Lofoten Basin that are believe to influence deep water formation. The solution is found to extend the topographic β-plume solution (Kuehl 2014, GRL) in two ways: 1) The solution is valid for intensifying jets. 2) The influence of nonlinear advection is included. The SWE are scaled to the case of a topographically controlled jet, then solved by introducing a similarity variable η = Cxy . The nonlinear solution, valid for topographies h =h0 - αxy3 , takes the form of the Lambert W Function for velocity. The linear solution, valid for topographies h =h0 - αxyγ , takes the form of the Error Function for transport. Kuehl's results considered the case - 1 <= γ < 1 which admits expanding jets, while the new result consider the case γ < - 1 which admits intensifying jets.

  12. A rapid and reversible skull optical clearing method for monitoring cortical blood flow

    Science.gov (United States)

    Zhang, Chao; Zhao, Yanjie; Shi, Rui; Zhu, Dan

    2016-03-01

    In vivo cortex optical imaging is of great important for revealing both structural and functional architecture of brain with high temporal-spatial resolution. To reduce the limitation of turbid skull, researchers had to establish various skull windows or directly expose cortex through craniotomy. Here we developed a skull optical clearing method to make skull transparent. Laser speckle contrast imaging technique was used to monitor the cortical blood flow after topical treatment with the optical clearing agents. The results indicated that the image contrast increased gradually, and then maintained at a high level after 15 min for adult mice, which made the image quality and resolution of micro-vessels nearly approximate to those of exposed cortex. Both the cortical blood flow velocity almost kept constant after skull became transparent. Besides, the treatment of physiological saline on the skull could make skull return to the initial state again and the skull could become transparent again when SOCS retreated it. Thus, we could conclude that the skull optical clearing method was rapid, valid, reversible and safe, which provided us available approach for performing the cortical structural and functional imaging at high temporal-spatial resolution.

  13. Traffic and Granular Flow’05

    CERN Document Server

    Pöschel, Thorsten; Kühne, Reinhart; Schreckenberg, Michael; Wolf, Dietrich

    2007-01-01

    The conference series Tra?c and Granular Flow has been established in 1995 and has since then been held biannually. At that time, the investigation of granular materials and tra?c was still somewhat exotic and was just starting to become popular among physicists. Originally the idea behind this conference series was to facilitate the c- vergence of the two ?elds, inspired by the similarities of certain phenomena and the use of similar theoretical methods. However, in recent years it has become clear that probably the di?erences between the two systems are much more interesting than the similarities. Nevertheless, the importance of various interrelations among these ?elds is still growing. The workshop continues to o?er an opportunity to stimulate this interdisciplinary research. Over the years the spectrum of topics has become much broader and has included also problems related to topics ranging from social dynamics to - ology. The conference manages to bring together people with rather di?erent background, r...

  14. Failure of granular assemblies

    OpenAIRE

    Welker, Philipp

    2011-01-01

    This work investigates granular assemblies subjected to increasing external forces in the quasi-static limit. In this limit, the system’s evolution depends on static properties of the system, but is independent of the particles’ inertia. At the failure, which occurs at a certain value of the external forces, the particles’ motions increase quickly. In this thesis, the properties of granular systems during the weakening process and at the failure are investigated with the Discrete Element Meth...

  15. Rough-Granular Computing

    Institute of Scientific and Technical Information of China (English)

    Andrzej Skowron

    2006-01-01

    Solving complex problems by multi-agent systems in distributed environments requires new approximate reasoning methods based on new computing paradigms. One such recently emerging computing paradigm is Granular Computing(GC). We discuss the Rough-Granular Computing(RGC) approach to modeling of computations in complex adaptive systems and multiagent systems as well as for approximate reasoning about the behavior of such systems. The RGC methods have been successfully applied for solving complex problems in areas such as identification of objects or behavioral patterns by autonomous systems, web mining, and sensor fusion.

  16. Impact of granular drops

    KAUST Repository

    Marston, J. O.

    2013-07-15

    We investigate the spreading and splashing of granular drops during impact with a solid target. The granular drops are formed from roughly spherical balls of sand mixed with water, which is used as a binder to hold the ball together during free-fall. We measure the instantaneous spread diameter for different impact speeds and find that the normalized spread diameter d/D grows as (tV/D)1/2. The speeds of the grains ejected during the “splash” are measured and they rarely exceed twice that of the impact speed.

  17. Onset of sediment transport is a continuous transition driven by fluid shear and granular creep.

    Science.gov (United States)

    Houssais, Morgane; Ortiz, Carlos P; Durian, Douglas J; Jerolmack, Douglas J

    2015-03-09

    Fluid-sheared granular transport sculpts landscapes and undermines infrastructure, yet predicting the onset of sediment transport remains notoriously unreliable. For almost a century, this onset has been treated as a discontinuous transition at which hydrodynamic forces overcome gravity-loaded grain-grain friction. Using a custom laminar-shear flume to image slow granular dynamics deep into the bed, here we find that the onset is instead a continuous transition from creeping to granular flow. This transition occurs inside the dense granular bed at a critical viscous number, similar to granular flows and colloidal suspensions and inconsistent with hydrodynamic frameworks. We propose a new phase diagram for sediment transport, where 'bed load' is a dense granular flow bounded by creep below and suspension above. Creep is characteristic of disordered solids and reminiscent of soil diffusion on hillslopes. Results provide new predictions for the onset and dynamics of sediment transport that challenge existing models.

  18. Aerofractures in Confined Granular Media

    Science.gov (United States)

    Eriksen, Fredrik K.; Turkaya, Semih; Toussaint, Renaud; Måløy, Knut J.; Flekkøy, Eirik G.

    2015-04-01

    We will present the optical analysis of experimental aerofractures in confined granular media. The study of this generic process may have applications in industries involving hydraulic fracturing of tight rocks, safe construction of dams, tunnels and mines, and in earth science where phenomena such as mud volcanoes and sand injectites are results of subsurface sediment displacements driven by fluid overpressure. It is also interesting to increase the understanding the flow instability itself, and how the fluid flow impacts the solid surrounding fractures and in the rest of the sample. Such processes where previously studied numerically [Niebling 2012a, Niebling 2012b] or in circular geometries. We will here explore experimentally linear geometries. We study the fracturing patterns that form when air flows into a dense, non-cohesive porous medium confined in a Hele-Shaw cell - i.e. into a packing of dry 80 micron beads placed between two glass plates separated by ~1mm. The cell is rectangular and fitted with a semi-permeable boundary to the atmosphere - blocking beads but not air - on one short edge, while the other three edges are impermeable. The porous medium is packed inside the cell between the semi-permeable boundary and an empty volume at the sealed side where the air pressure can be set and kept at a constant overpressure (1-2bar). Thus, for the air trapped inside the cell to release the overpressure it has to move through the solid. At high enough overpressures the air flow deforms the solid and increase permeability in some regions along the air-solid interface, which results in unstable flow and aerofracturing. Aerofractures are thought to be an analogue to hydrofractures, and an advantage of performing aerofracturing experiments in a Hele-Shaw cell is that the fracturing process can easily be observed in the lab. Our experiments are recorded with a high speed camera with a framerate of 1000 frames per second. In the analysis, by using various image

  19. Challenges in Predicting Planetary Granular Mechanics

    Science.gov (United States)

    Metzger, Philip T.

    2005-01-01

    Through the course of human history, our needs in agriculture, habitat construction, and resource extraction have driven us to gain more experience working with the granular materials of planet Earth than with any other type of substance in nature, with the possible exception being water. Furthermore, throughout the past two centuries we have seen a dramatic and ever growing interest among scientists and engineers to understand and predict both its static and rheological properties. Ironically, however, despite this wealth of experience we still do not have a fundamental understanding of the complex physical phenomena that emerge even as just ordinary sand is shaken, squeezed or poured. As humanity is now reaching outward through the solar system, not only robotic ally but also with our immediate human presence, the need to understand and predict granular mechanics has taken on a new dimension. We must learn to farm, build and mine the regoliths of other planets where the environmental conditions are different than on Earth, and we are rapidly discovering that the effects of these environmental conditions are not trivial. Some of the relevant environmental features include the regolith formation processes throughout a planet's geologic and hydrologic history, the unknown mixtures of volatiles residing within the soil, the relative strength of gravitation, d the atm9spheric pressure and its seasonal variations. The need to work with soils outside our terrestrial experience base provides us with both a challenge and an opportunity. The challenge is to learn how to extrapolate our experience into these new planetary conditions, enabling the engineering decisions that are needed right now as we take the next few steps in solar system exploration. The opportunity is to use these new planetary environments as laboratories that will help us to see granular mechanics in new ways, to challenge our assumptions, and to help us finally unravel the elusive physics that lie

  20. Numerical Simulation of the Sedimentation of a Sphere in a Sheared Granular Fluid: A Granular Stokes Experiment

    Science.gov (United States)

    Tripathi, Anurag; Khakhar, D. V.

    2011-09-01

    We study, computationally, the sedimentation of a sphere of higher mass in a steady, gravity-driven granular flow of otherwise identical spheres, on a rough inclined plane. Taking a hydrodynamic approach at the scale of the particle, we find the drag force to be given by a modified Stokes law and the buoyancy force by the Archimedes principle, with excluded volume effects taken into account. We also find significant differences between the hydrodynamic case and the granular case, which are highlighted.

  1. A Rapid and Low-Cost Nonlithographic Method to Fabricate Biomedical Microdevices for Blood Flow Analysis

    Directory of Open Access Journals (Sweden)

    Elmano Pinto

    2014-12-01

    Full Text Available Microfluidic devices are electrical/mechanical systems that offer the ability to work with minimal sample volumes, short reactions times, and have the possibility to perform massive parallel operations. An important application of microfluidics is blood rheology in microdevices, which has played a key role in recent developments of lab-on-chip devices for blood sampling and analysis. The most popular and traditional method to fabricate these types of devices is the polydimethylsiloxane (PDMS soft lithography technique, which requires molds, usually produced by photolithography. Although the research results are extremely encouraging, the high costs and time involved in the production of molds by photolithography is currently slowing down the development cycle of these types of devices. Here we present a simple, rapid, and low-cost nonlithographic technique to create microfluidic systems for biomedical applications. The results demonstrate the ability of the proposed method to perform cell free layer (CFL measurements and the formation of microbubbles in continuous blood flow.

  2. Three-dimensional Simulation of Gas/Solid Flow in Spout-fluid Beds with Kinetic Theory of Granular Flow%基于颗粒流运动论的喷动流化床气固流动行为三维模拟

    Institute of Scientific and Technical Information of China (English)

    钟文琪; 章名耀; 金保升; 袁竹林

    2006-01-01

    A three-dimensional Eulerian multiphase model, with closure law according to the kinetic theory of granular flow, was used to study the gas/solid flow behaviors in spout-fluid beds. The influences of the coefficient of restitution due to non-ideal particle collisions on the simulated results were tested. It is demonstrated that the simulated result is strongly affected by the coefficient of restitution. Comparison of simulations with experiments in a small spout-fluid bed showed that an appropriate coefficient of restitution of 0.93 was necessary to simulate the flow characteristics in an underdesigned large size of spout-fluid bed coal gasifier with diameter of 1m and height of 6m. The internal jet and gas/solid flow patterns at different operating conditions were obtained. The simulations show that an optimal gas/solid flow pattern for coal gasification is found when the spouting gas flow rate is equal to the fluidizing gas flow rate and the total of them is two and a half times the minimum fluidizing gas flow rate. Besides, the radial distributions of particle velocity and gas velocity show similar tendencies; the radial distributions of particle phase pressure due to particle collisions and the particle pseudo-temperature corresponding to the macroscopic kinetic energy of the random particle motion also show similar tendencies. These indicate that both gas drag force and particle collisions dominate the movement of particles.

  3. Analysis of Ground-Water Flow in the Madison Aquifer using Fluorescent Dyes Injected in Spring Creek and Rapid Creek near Rapid City, South Dakota, 2003-04

    Science.gov (United States)

    Putnam, Larry D.; Long, Andrew J.

    2007-01-01

    The Madison aquifer, which contains fractures and solution openings in the Madison Limestone, is used extensively for water supplies for the city of Rapid City and other suburban communities in the Rapid City, S. Dak., area. The 48 square-mile study area includes the west-central and southwest parts of Rapid City and the outcrops of the Madison Limestone extending from south of Spring Creek to north of Rapid Creek. Recharge to the Madison Limestone occurs when streams lose flow as they cross the outcrop. The maximum net loss rate for Spring and Rapid Creek loss zones are 21 and 10 cubic feet per second (ft3/s), respectively. During 2003 and 2004, fluorescent dyes were injected in the Spring and Rapid Creek loss zones to estimate approximate locations of preferential flow paths in the Madison aquifer and to measure the response and transit times at wells and springs. Four injections of about 2 kilograms of fluorescein dye were made in the Spring Creek loss zone during 2003 (sites S1, S2, and S3) and 2004 (site S4). Injection at site S1 was made in streamflow just upstream from the loss zone over a 12-hour period when streamflow was about equal to the maximum loss rate. Injections at sites S2, S3, and S4 were made in specific swallow holes located in the Spring Creek loss zone. Injection at site R1 in 2004 of 3.5 kilograms of Rhodamine WT dye was made in streamflow just upstream from the Rapid Creek loss zone over about a 28-hour period. Selected combinations of 27 wells, 6 springs, and 3 stream sites were monitored with discrete samples following the injections. For injections at sites S1-S3, when Spring Creek streamflow was greater than or equal to 20 ft3/s, fluorescein was detected in samples from five wells that were located as much as about 2 miles from the loss zone. Time to first arrival (injection at site S1) ranged from less than 1 to less than 10 days. The maximum fluorescein concentration (injection at site S1) of 120 micrograms per liter (ug/L) at well CO

  4. Rapid detection of pesticides not amenable to multi-residue methods by flow injection-tandem mass spectrometry

    NARCIS (Netherlands)

    Mol, J.G.J.; Dam, van R.C.J.

    2014-01-01

    Flow injection combined with tandem mass spectrometry (MS/MS) was investigated for the rapid detection of highly polar pesticides that are not amenable to multi-residue methods because they do not partition into organic solvents and require dedicated chromatographic conditions. The pesticides includ

  5. Local rheology of suspensions and dry granular materials

    NARCIS (Netherlands)

    de Cagny, H.; Fall, A.; Denn, M.M.; Bonn, D.

    2015-01-01

    The flow of dry and wet granular media is investigated in a Couette geometry using magnetic resonance imaging in order to test the applicability of the "fluidity model" for nonlocality in these materials. Local volume fraction measurements show that the systems become heterogeneous during flow. We f

  6. Segregation induced fingering instabilities in granular avalanches

    Science.gov (United States)

    Woodhouse, Mark; Thornton, Anthony; Johnson, Chris; Kokelaar, Pete; Gray, Nico

    2013-04-01

    It is important to be able to predict the distance to which a hazardous natural granular flows (e.g. snow slab avalanches, debris-flows and pyroclastic flows) might travel, as this information is vital for accurate assessment of the risks posed by such events. In the high solids fraction regions of these flows the large particles commonly segregate to the surface, where they are transported to the margins to form bouldery flow fronts. In many natural flows these bouldery margins experience a much greater frictional force, leading to frontal instabilities. These instabilities create levees that channelize the flow vastly increasing the run-out distance. A similar effect can be observed in dry granular experiments, which use a combination of small round and large rough particles. When this mixture is poured down an inclined plane, particle size segregation causes the large particles to accumulate near the margins. Being rougher, the large particles experience a greater friction force and this configuration (rougher material in front of smoother) can be unstable. The instability causes the uniform flow front to break up into a series of fingers. A recent model for particle size-segregation has been coupled to existing avalanche models through a particle concentration dependent friction law. In this talk numerical solutions of this coupled system are presented and compared to both large scale experiments carried out at the USGS flume and more controlled small scale laboratory experiments. The coupled depth-averaged model captures the accumulation of large particles at the flow front. We show this large particle accumulation at the head of the flow can lead to the break-up of the initially uniform front into a series of fingers. However, we are unable to obtain a fully grid-resolved numerical solution; the width of the fingers decreases as the grid is refined. By considering the linear stability of a steady, fully-developed, bidisperse granular layer it is shown that

  7. Python tools for rapid development, calibration, and analysis of generalized groundwater-flow models

    Science.gov (United States)

    Starn, J. J.; Belitz, K.

    2014-12-01

    National-scale water-quality data sets for the United States have been available for several decades; however, groundwater models to interpret these data are available for only a small percentage of the country. Generalized models may be adequate to explain and project groundwater-quality trends at the national scale by using regional scale models (defined as watersheds at or between the HUC-6 and HUC-8 levels). Coast-to-coast data such as the National Hydrologic Dataset Plus (NHD+) make it possible to extract the basic building blocks for a model anywhere in the country. IPython notebooks have been developed to automate the creation of generalized groundwater-flow models from the NHD+. The notebook format allows rapid testing of methods for model creation, calibration, and analysis. Capabilities within the Python ecosystem greatly speed up the development and testing of algorithms. GeoPandas is used for very efficient geospatial processing. Raster processing includes the Geospatial Data Abstraction Library and image processing tools. Model creation is made possible through Flopy, a versatile input and output writer for several MODFLOW-based flow and transport model codes. Interpolation, integration, and map plotting included in the standard Python tool stack also are used, making the notebook a comprehensive platform within on to build and evaluate general models. Models with alternative boundary conditions, number of layers, and cell spacing can be tested against one another and evaluated by using water-quality data. Novel calibration criteria were developed by comparing modeled heads to land-surface and surface-water elevations. Information, such as predicted age distributions, can be extracted from general models and tested for its ability to explain water-quality trends. Groundwater ages then can be correlated with horizontal and vertical hydrologic position, a relation that can be used for statistical assessment of likely groundwater-quality conditions

  8. Kinetic approach to granular gases.

    Science.gov (United States)

    Puglisi, A; Loreto, V; Marini Bettolo Marconi, U; Vulpiani, A

    1999-05-01

    We address the problem of the so-called "granular gases," i.e., gases of massive particles in rapid movement undergoing inelastic collisions. We introduce a class of models of driven granular gases for which the stationary state is the result of the balance between the dissipation and the random forces which inject energies. These models exhibit a genuine thermodynamic limit, i.e., at fixed density the mean values of kinetic energy and dissipated energy per particle are independent of the number N of particles, for large values of N. One has two regimes: when the typical relaxation time tau of the driving Brownian process is small compared with the mean collision time tau(c) the spatial density is nearly homogeneous and the velocity probability distribution is Gaussian. In the opposite limit tau>tau(c) one has strong spatial clustering, with a fractal distribution of particles, and the velocity probability distribution strongly deviates from the Gaussian one. Simulations performed in one and two dimensions under the Stosszahlansatz Boltzmann approximation confirm the scenario. Furthermore, we analyze the instabilities bringing to the spatial and the velocity clusterization. Firstly, in the framework of a mean-field model, we explain how the existence of the inelasticity can lead to a spatial clusterization; on the other hand, we discuss, in the framework of a Langevin dynamics treating the collisions in a mean-field way, how a non-Gaussian distribution of velocity can arise. The comparison between the numerical and the analytical results exhibits an excellent agreement.

  9. Numerical Simulations of Granular Processes

    Science.gov (United States)

    Richardson, Derek C.; Michel, Patrick; Schwartz, Stephen R.; Ballouz, Ronald-Louis; Yu, Yang; Matsumura, Soko

    2014-11-01

    Spacecraft images and indirect observations including thermal inertia measurements indicate most small bodies have surface regolith. Evidence of granular flow is also apparent in the images. This material motion occurs in very low gravity, therefore in a completely different gravitational environment than on the Earth. Understanding and modeling these motions can aid in the interpretation of imaged surface features that may exhibit signatures of constituent material properties. Also, upcoming sample-return missions to small bodies, and possible future manned missions, will involve interaction with the surface regolith, so it is important to develop tools to predict the surface response. We have added new capabilities to the parallelized N-body gravity tree code pkdgrav [1,2] that permit the simulation of granular dynamics, including multi-contact physics and friction forces, using the soft-sphere discrete-element method [3]. The numerical approach has been validated through comparison with laboratory experiments (e.g., [3,4]). Ongoing and recently completed projects include: impacts into granular materials using different projectile shapes [5]; possible tidal resurfacing of asteroid Apophis during its 2029 encounter [6]; the Brazil-nut effect in low gravity [7]; and avalanche modeling.Acknowledgements: DCR acknowledges NASA (grants NNX08AM39G, NNX10AQ01G, NNX12AG29G) and NSF (AST1009579). PM acknowledges the French agency CNES. SRS works on the NEOShield Project funded under the European Commission’s FP7 program agreement No. 282703. SM acknowledges support from the Center for Theory and Computation at U Maryland and the Dundee Fellowship at U Dundee. Most simulations were performed using the YORP cluster in the Dept. of Astronomy at U Maryland and on the Deepthought High-Performance Computing Cluster at U Maryland.References: [1] Richardson, D.C. et al. 2000, Icarus 143, 45; [2] Stadel, J. 2001, Ph.D. Thesis, U Washington; [3] Schwartz, S.R. et al. 2012, Gran

  10. Wave propagation and energy dissipation in viscoelastic granular media

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In terms of viscoelasticity, the relevant theory of wave in granular media is analyzed in this paper.Under the conditions of slight deformation of granules, wave equation, complex number expressions of propagation vector and attenuation vector, attenuation coefficient expressions of longitudinal wave and transverse wave,etc, are analyzed and deduced. The expressions of attenuation coefficients of viscoelastic longitudinal wave and transverse wave show that the attenuation of wave is related to frequency. The higher the frequency is, the more the attenuation is, which is tested by the laboratory experiment. In addition, the energy dissipation is related to the higher frequency wave that is absorbed by granular media. The friction amongst granular media also increase the energy dissipation. During the flowing situation the expression of transmission factor of energy shows that the granular density difference is the key factor which leads to the attenuation of vibrating energy.This has been proved by the experiment results.

  11. Similitude study of a moving bed granular filter

    Energy Technology Data Exchange (ETDEWEB)

    Robert C. Brown; Huawei Shi; Gerald Colver; Saw-Choon Soo [Iowa State University, IA (United States)

    2003-12-10

    The goal of this study was to evaluate the performance of a moving bed granular filter designed for hot gas clean up. This study used similitude theory to devise experiments that were conducted at near-ambient conditions while simulating the performance of filters operated at elevated temperatures and pressures (850{sup o}C and 1000 kPa). These experiments revealed that the proposed moving bed granular filter can operate at high collection efficiencies, typically exceeding 99%, and low pressure drops without the need for periodic regeneration through the use of a continuous flow of fresh granular filter media in the filter. In addition, important design constraints were discovered for the successful operation of the proposed moving bed granular filter.

  12. Rapid Detection of Listeria by Bacteriophage Amplification and SERS-Lateral Flow Immunochromatography.

    Science.gov (United States)

    Stambach, Nicholas R; Carr, Stephanie A; Cox, Christopher R; Voorhees, Kent J

    2015-12-14

    A rapid Listeria detection method was developed utilizing A511 bacteriophage amplification combined with surface-enhanced Raman spectroscopy (SERS) and lateral flow immunochromatography (LFI). Anti-A511 antibodies were covalently linked to SERS nanoparticles and printed onto nitrocellulose membranes. Antibody-conjugated SERS nanoparticles were used as quantifiable reporters. In the presence of A511, phage-SERS nanoparticle complexes were arrested and concentrated as a visible test line, which was interrogated quantitatively by Raman spectroscopy. An increase in SERS intensity correlated to an increase in captured phage-reporter complexes. SERS limit of detection was 6 × 10(6) pfu·mL(-1), offering detection below that obtainable by the naked eye (LOD 6 × 10(7) pfu·mL(-1)). Phage amplification experiments were carried out at a multiplicity of infection (MOI) of 0.1 with 4 different starting phage concentrations monitored over time using SERS-LFI and validated by spot titer assay. Detection of L. monocytogenes concentrations of 1 × 10(7) colony forming units (cfu)·mL(-1), 5 × 10(6) cfu·mL(-1), 5 × 10(5) cfu·mL(-1) and 5 × 10(4) cfu·mL(-1) was achieved in 2, 2, 6, and 8 h, respectively. Similar experiments were conducted at a constant starting phage concentration (5 × 10(5) pfu·mL(-1)) with MOIs of 1, 2.5, and 5 and were detected in 2, 4, and 5 h, respectively.

  13. Rapid Detection of Listeria by Bacteriophage Amplification and SERS-Lateral Flow Immunochromatography

    Directory of Open Access Journals (Sweden)

    Nicholas R. Stambach

    2015-12-01

    Full Text Available A rapid Listeria detection method was developed utilizing A511 bacteriophage amplification combined with surface-enhanced Raman spectroscopy (SERS and lateral flow immunochromatography (LFI. Anti-A511 antibodies were covalently linked to SERS nanoparticles and printed onto nitrocellulose membranes. Antibody-conjugated SERS nanoparticles were used as quantifiable reporters. In the presence of A511, phage-SERS nanoparticle complexes were arrested and concentrated as a visible test line, which was interrogated quantitatively by Raman spectroscopy. An increase in SERS intensity correlated to an increase in captured phage-reporter complexes. SERS limit of detection was 6 × 106 pfu·mL−1, offering detection below that obtainable by the naked eye (LOD 6 × 107 pfu·mL−1. Phage amplification experiments were carried out at a multiplicity of infection (MOI of 0.1 with 4 different starting phage concentrations monitored over time using SERS-LFI and validated by spot titer assay. Detection of L. monocytogenes concentrations of 1 × 107 colony forming units (cfu·mL−1, 5 × 106 cfu·mL−1, 5 × 105 cfu·mL−1 and 5 × 104 cfu·mL−1 was achieved in 2, 2, 6, and 8 h, respectively. Similar experiments were conducted at a constant starting phage concentration (5 × 105 pfu·mL−1 with MOIs of 1, 2.5, and 5 and were detected in 2, 4, and 5 h, respectively.

  14. A Flow Cytometry Method for Rapidly Assessing Mycobacterium tuberculosis Responses to Antibiotics with Different Modes of Action.

    Science.gov (United States)

    Hendon-Dunn, Charlotte Louise; Doris, Kathryn Sarah; Thomas, Stephen Richard; Allnutt, Jonathan Charles; Marriott, Alice Ann Neville; Hatch, Kim Alexandra; Watson, Robert James; Bottley, Graham; Marsh, Philip David; Taylor, Stephen Charles; Bacon, Joanna

    2016-07-01

    Current methods for assessing the drug susceptibility of Mycobacterium tuberculosis are lengthy and do not capture information about viable organisms that are not immediately culturable under standard laboratory conditions as a result of antibiotic exposure. We have developed a rapid dual-fluorescence flow cytometry method using markers for cell viability and death. We show that the fluorescent marker calcein violet with an acetoxy-methyl ester group (CV-AM) can differentiate between populations of M. tuberculosis growing at different rates, while Sytox green (SG) can differentiate between live and dead mycobacteria. M. tuberculosis was exposed to isoniazid or rifampin at different concentrations over time and either dual stained with CV-AM and SG and analyzed by flow cytometry or plated to determine the viability of the cells. Although similar trends in the loss of viability were observed when the results of flow cytometry and the plate counting methods were compared, there was a lack of correlation between these two approaches, as the flow cytometry analysis potentially captured information about cell populations that were unable to grow under standard conditions. The flow cytometry approach had an additional advantage in that it could provide insights into the mode of action of the drug: antibiotics targeting the cell wall gave a flow cytometry profile distinct from those inhibiting intracellular processes. This rapid drug susceptibility testing method could identify more effective antimycobacterials, provide information about their potential mode of action, and accelerate their progress to the clinic.

  15. Understanding the rapidity of subsurface storm flow response from a fracture-oriented shallow vadose through a new perspective

    Science.gov (United States)

    Zhao, Peng; Zhao, Pei; Liang, Chuan; Li, Tianyang; Zhou, Baojia

    2017-01-01

    Velocity and celerity in hydrologic systems are controlled by different mechanisms. Efforts were made through joint sample collection and the use of hydrographs and tracers to understand the rapidity of the subsurface flow response to rainstorms on hourly time scales. Three deep subsurface flows during four natural rainstorm events were monitored. The results show that (1) deeper discharge was observed early in responding rainfall events and yielded a high hydrograph amplitude; (2) a ratio index, k, reflecting the dynamic change of the rainfall perturbation intensity in subsurface flow, might reveal inner causal relationships between the flow index and the tracer signal index. Most values of k were larger than 1 at the perturbation stage but approximated 1 at the no-perturbation stage; and (3) for statistical analysis of tracer signals in subsurface flows, the total standard deviation was 17.2, 11.9, 7.4 and 3.5 at perturbation stages and 4.4, 2.5, 1.1, and 0.95 at the non-perturbation stage for observed events. These events were 3-7 times higher in the former rather than the later, reflecting that the variation of tracer signals primarily occurred under rainfall perturbation. Thus, we affirmed that the dynamic features of rainfall have a key effect on rapid processes because, besides the gravity, mechanical waves originating from dynamic rainfall features are another driving factor for conversion between different types of rainfall mechanical energy. A conceptual model for pressure wave propagation was proposed, in which virtual subsurface flow processes in a heterogeneous vadose zone under rainfall are analogous to the water hammer phenomenon in complex conduit systems. Such an analogy can allow pressure in a shallow vadose to increase and decrease and directly influence the velocity and celerity of the flow reflecting a mechanism for rapid subsurface hydrologic response processes in the shallow vadose zone.

  16. The rise of granular computing

    Institute of Scientific and Technical Information of China (English)

    YAO Yi-yu

    2008-01-01

    This paper has two purposes. One is to present a critical examination of the rise of granular computing and the other is to suggest a triarchic theory of granular computing. By examining the reasons, justifications, and motivations for the rise of granular computing, we may be able to fully appreciate its scope, goal and potential values. The results enable us to formulate a triarchic theory in the light of research results from many disciplines. The three components of the theory are labeled as the philosophy, the methodology, and the computation. The integration of the three offers a unified view of gran-ular computing as a way of structured thinking, a method of structured problem solving, and a paradigm of structured infor-mation processing, focusing on hierarchical granular structures. The triarchic theory is an important effort in synthesizing the various theories and models of granular computing.

  17. Three Perspectives of Granular Computing

    Institute of Scientific and Technical Information of China (English)

    Yiyu(Y.Y.) Yao

    2006-01-01

    As an emerging field of study, granular computing has received much attention. Many models, frameorks, methods and techniques have been proposed and studied. It is perhaps the time to seek for a general and unified view so that fundamental issues can be examined and clarified. This paper examines granular computing from three perspectives. By viewing granular computing as a way of structured thinking,we focus on its philosophical foundations in modeling human perception of the reality. By viewing granular computing as a method of structured problem solving, we examine its theoretical and methodological foundations in solving a wide range of real-world problems. By viewing granular computing as a paradigm of information processing,we turn our attention to its more concrete techniques. The three perspectives together offer a holistic view of granular computing.

  18. Long runout landslides: a solution from granular mechanics

    Directory of Open Access Journals (Sweden)

    Stanislav eParez

    2015-10-01

    Full Text Available Large landslides exhibit surprisingly long runout distances compared to a rigid body sliding from the same slope, and the mechanism of this phenomena has been studied for decades. This paper shows that the observed long runouts can be explained quite simply via a granular pile flowing downhill, while collapsing and spreading, without the need for frictional weakening that has traditionally been suggested to cause long runouts. Kinematics of the granular flow is divided into center of mass motion and spreading due to flattening of the flowing mass. We solve the center of mass motion analytically based on a frictional law valid for granular flow, and find that center of mass runout is similar to that of a rigid body. Based on the shape of deposits observed in experiments with collapsing granular columns and numerical simulations of landslides, we derive a spreading length Rf~V^1/3. Spreading of a granular pile, leading to a deposit angle much lower than the angle of repose or the dynamic friction angle, is shown to be an important, often dominating, contribution to the total runout distance, accounting for the long runouts observed for natural landslides.

  19. Long runout landslides: a solution from granular mechanics

    Science.gov (United States)

    Parez, Stanislav; Aharonov, Einat

    2015-10-01

    Large landslides exhibit surprisingly long runout distances compared to a rigid body sliding from the same slope, and the mechanism of this phenomena has been studied for decades. This paper shows that the observed long runouts can be explained quite simply via a granular pile flowing downhill, while collapsing and spreading, without the need for frictional weakening that has traditionally been suggested to cause long runouts. Kinematics of the granular flow is divided into center of mass motion and spreading due to flattening of the flowing mass. We solve the center of mass motion analytically based on a frictional law valid for granular flow, and find that center of mass runout is similar to that of a rigid body. Based on the shape of deposits observed in experiments with collapsing granular columns and numerical simulations of landslides, we derive a spreading length Rf~V^1/3. Spreading of a granular pile, leading to a deposit angle much lower than the angle of repose or the dynamic friction angle, is shown to be an important, often dominating, contribution to the total runout distance, accounting for the long runouts observed for natural landslides.

  20. Transport analogy for segregation and granular rheology

    Science.gov (United States)

    Liu, Siying; McCarthy, Joseph J.

    2017-08-01

    Here, we show a direct connection between density-based segregation and granular rheology that can lead to insight into both problems. Our results exhibit a transition in the rate of segregation during simple shear that occurs at I ˜0.5 and mimics a coincident regime change in flow rheology. We propose scaling arguments that support a packing fraction criterion for this transition that can both explain our segregation results as well as unify existing literature studies of granular rheology. By recasting a segregation model in terms of rheological parameters, we establish an approach that not only collapses results for a wide range of conditions, but also yields a direct relationship between the coordination number z and the segregation velocity. Moreover, our approach predicts the precise location of the observed regime change or saturation. This suggests that it is possible to rationally design process operating conditions that lead to significantly lower segregation extents. These observations can have a profound impact on both the study of granular flow or mixing as well as industrial practice.

  1. Type-2 fuzzy granular models

    CERN Document Server

    Sanchez, Mauricio A; Castro, Juan R

    2017-01-01

    In this book, a series of granular algorithms are proposed. A nature inspired granular algorithm based on Newtonian gravitational forces is proposed. A series of methods for the formation of higher-type information granules represented by Interval Type-2 Fuzzy Sets are also shown, via multiple approaches, such as Coefficient of Variation, principle of justifiable granularity, uncertainty-based information concept, and numerical evidence based. And a fuzzy granular application comparison is given as to demonstrate the differences in how uncertainty affects the performance of fuzzy information granules.

  2. Segmented continuous-flow multiplex polymerase chain reaction microfluidics for high-throughput and rapid foodborne pathogen detection.

    Science.gov (United States)

    Shu, Bowen; Zhang, Chunsun; Xing, Da

    2014-05-15

    High-throughput and rapid identification of multiple foodborne bacterial pathogens is vital in global public health and food industry. To fulfill this need, we propose a segmented continuous-flow multiplex polymerase chain reaction (SCF-MPCR) on a spiral-channel microfluidic device. The device consists of a disposable polytetrafluoroethylene (PTFE) capillary microchannel coiled on three isothermal blocks. Within the channel, n segmented flow regimes are sequentially generated, and m-plex PCR is individually performed in each regime when each mixture is driven to pass three temperature zones, thus providing a rapid analysis throughput of m×n. To characterize the performance of the microfluidic device, continuous-flow multiplex PCR in a single segmented flow has been evaluated by investigating the effect of key reaction parameters, including annealing temperatures, flow rates, polymerase concentration and amount of input DNA. With the optimized parameters, the genomic DNAs from Salmonella enterica, Listeria monocytogenes, Escherichia coli O157:H7 and Staphylococcus aureus could be amplified simultaneously in 19min, and the limit of detection was low, down to 10(2) copiesμL(-1). As proof of principle, the spiral-channel SCF-MPCR was applied to sequentially amplify four different bacterial pathogens from banana, milk, and sausage, displaying a throughput of 4×3 with no detectable cross-contamination.

  3. Rapid and efficient copper-catalyzed Finkelstein reaction of (hetero)aromatics under continuous-flow conditions.

    Science.gov (United States)

    Chen, Mao; Ichikawa, Saki; Buchwald, Stephen L

    2015-01-01

    A general, rapid, and efficient method for the copper-catalyzed Finkelstein reaction of (hetero)aromatics has been developed using continuous flow to generate a variety of aryl iodides. The described method can tolerate a broad spectrum of functional groups, including N-H and O-H groups. Additionally, in lieu of isolation, the aryl iodide solutions were used in two distinct multistep continuous-flow processes (amidation and Mg-I exchange/nucleophilic addition) to demonstrate the flexibility of this method.

  4. 准静态颗粒介质的弹性势能弛豫分析∗%Analysis of elastic energy relaxation pro cess for granular materials at quasi-static state

    Institute of Scientific and Technical Information of China (English)

    金鑫鑫; 金峰; 刘宁; 孙其诚

    2016-01-01

    . Then granular temperature rooted from gas kinetics is introduced to model the macroscopic behaviors. For loose and rapid granular flow, the kinetic granular temperature itself is the root to affect the flow process. While in a dense granular system, the granular temperature at a quasi-static state is referred to as elastic energy fluctuation. The structure can be kept stable when granular temperature exists on account of the mutual confinement among particles. And the granular temperature at a stable state is just a representation of internal structure of granular assembly. When the granular temperature stimulated by the external disturbance exceeds the stable value, the irreversible process happens and the difference between the excited state and stationary state is the driving force for evolution. The stress relaxations under different surface properties and confining pressures are simulated using non-equilibrium theory with new change for granular temperature. It can be found that the granular temperature difference triggers elastic relaxation and force chains reorganization. And the larger the temperature difference, the further away from the steady state the system is and the larger the stress change is. The more smooth the surface and the smaller the confining pressure, the lower resistance is generated, so that the initial granular temperature difference is larger and the stress change is larger during stress relaxation. The granular temperature decreases as time goes by because of its own relaxation. When the difference is equal to zero, the process of stress relaxation finishes and the system evolves into a global minimum of potential energy.

  5. Pore-scale Modelling of Capillarity in Swelling Granular Materials

    Science.gov (United States)

    Hassanizadeh, S. M.; Sweijen, T.; Nikooee, E.; Chareyre, B.

    2015-12-01

    Capillarity in granular porous media is a common and important phenomenon in earth materials and industrial products, and therefore has been studied extensively. To model capillarity in granular porous media, one needs to go beyond current models which simulate either two-phase flow in porous media or mechanical behaviour in granular media. Current pore-scale models for two-phase flow such as pore-network models are tailored for rigid pore-skeletons, even though in many applications, namely hydro-mechanical coupling in soils, printing, and hygienic products, the porous structure does change during two-phase flow. On the other hand, models such as Discrete Element Method (DEM), which simulate the deformable porous media, have mostly been employed for dry or saturated granular media. Here, the effects of porosity change and swelling on the retention properties was studied, for swelling granular materials. A pore-unit model that was capable to construct the capillary pressure - saturation curve was coupled to DEM. Such that the capillary pressure - saturation curve could be constructed for varying porosities and amounts of absorbed water. The study material was super absorbent polymer particles, which are capable to absorb water 10's to 200 times their initial weight. We have simulated quasi-static primary imbibition for different porosities and amounts of absorbed water. The results reveal a 3 dimensional surface between capillary pressure, saturation, and porosity, which can be normalized by means of the entry pressure and the effective water saturation to a unique curve.

  6. A multistep continuous-flow system for rapid on-demand synthesis of receptor ligands

    DEFF Research Database (Denmark)

    Petersen, Trine P; Ritzén, Andreas; Ulven, Trond

    2009-01-01

    A multistep continuous-flow system for synthesis of receptor ligands by assembly of three variable building blocks in a single unbroken flow is described. The sequence consists of three reactions and two scavenger steps, where a Cbz-protected diamine is reacted with an isocyanate, deprotected, an...

  7. Legged-locomotion on inclined granular media

    Science.gov (United States)

    Rieser, Jennifer; Qian, Feifei; Goldman, Daniel

    Animals traverse a wide variety of complex environments, including situations in which the ground beneath them can yield (e.g. dry granular media in desert dunes). Locomotion strategies that are effective on level granular media can fail when traversing a granular slope. Taking inspiration from successful legged-locomotors in sandy, uneven settings, we explore the ability of a small (15 cm long, 100 g), six-c-shaped legged robot to run uphill in a bed of 1-mm-diameter poppy seeds, using an alternating tripod gait. Our fully automated experiments reveal that locomotor performance can depend sensitively on both environmental parameters such as the inclination angle and volume fraction of the substrate, and robot morphology and control parameters like leg shape, step frequency, and the friction between the feet of the robot and the substrate. We assess performance by measuring the average speed of the robot, and we find that the robot tends to perform better at higher step frequency and lower inclination angles, and that average speed decreases more rapidly with increasing angle for higher step frequency.

  8. Granular motions near the threshold of entrainment

    Science.gov (United States)

    Valyrakis, Manousos; Alexakis, athanasios-Theodosios

    2016-04-01

    Our society is continuously impacted by significant weather events many times resulting in catastrophes that interrupt our normal way of life. In the context of climate change and increasing urbanisation these "extreme" hydrologic events are intensified both in magnitude and frequency, inducing costs of the order of billions of pounds. The vast majority of such costs and impacts (even more to developed societies) are due to water related catastrophes such as the geomorphic action of flowing water (including scouring of critical infrastructure, bed and bank destabilisation) and flooding. New tools and radically novel concepts are in need, to enable our society becoming more resilient. This presentation, emphasises the utility of inertial sensors in gaining new insights on the interaction of flow hydrodynamics with the granular surface at the particle scale and for near threshold flow conditions. In particular, new designs of the "smart-sphere" device are discussed with focus on the purpose specific sets of flume experiments, designed to identify the exact response of the particle resting at the bed surface for various below, near and above threshold flow conditions. New sets of measurements are presented for particle entrainment from a Lagrangian viewpoint. Further to finding direct application in addressing real world challenges in the water sector, it is shown that such novel sensor systems can also help the research community (both experimentalists and computational modellers) gain a better insight on the underlying processes governing granular dynamics.

  9. Jamming in granular materials

    Science.gov (United States)

    Behringer, Robert P.

    2015-01-01

    Granular materials are one of a class of materials which undergo a transition from mechanically unstable to mechanically stable states as key system parameters change. Pioneering work by Liu and Nagel and O'Hern et al. focused on models consisting of frictionless grains. In this case, density, commonly expressed in terms of the packing fraction, ϕ, is of particular importance. For instance, O'Hern et al. found that there is a minimum ϕ =ϕJ, such that below this value there are no jammed states, and that above this value, all stress-isotropic states are jammed. Recently, simulations and experiments have explored the case of grains with friction. This case is more subtle, and ϕ does not play such a simple role. Recently, several experiments have shown that there exists a range of relatively low ϕ's such that at the same ϕ it is possible to have jammed, unjammed, and fragile states in the sense of Cates et al. This review discusses some of this recent work, and contrasts the cases of jamming for frictionless and frictional granular systems.

  10. Rapid Analysis of Copper Ore in Pre-Smelter Head Flow Slurry by Portable X-ray Fluorescence.

    Science.gov (United States)

    Burnett, Brandon J; Lawrence, Neil J; Abourahma, Jehad N; Walker, Edward B

    2016-05-01

    Copper laden ore is often concentrated using flotation. Before the head flow slurry can be smelted, it is important to know the concentration of copper and contaminants. The concentration of copper and other elements fluctuate significantly in the head flow, often requiring modification of the concentrations in the slurry prior to smelting. A rapid, real-time analytical method is needed to support on-site optimization of the smelter feedstock. A portable, handheld X-ray fluorescence spectrometer was utilized to determine the copper concentration in a head flow suspension at the slurry origin. The method requires only seconds and is reliable for copper concentrations of 2.0-25%, typically encountered in such slurries. © The Author(s) 2016.

  11. Rapid synthesis of propyl caffeate in ionic liquid using a packed bed enzyme microreactor under continuous-flow conditions.

    Science.gov (United States)

    Wang, Jun; Gu, Shuang-Shuang; Cui, Hong-Sheng; Yang, Liu-Qing; Wu, Xiang-Yang

    2013-12-01

    Propyl caffeate has the highest antioxidant activity among caffeic acid alkyl esters, but its industrial production via enzymatic transesterification in batch reactors is hindered by a long reaction time (24h). To develop a rapid process for the production of propyl caffeate in high yield, a continuous-flow microreactor composed of a two-piece PDMS in a sandwich-like microchannel structure was designed for the transesterification of methyl caffeate and 1-propanol catalyzed by Novozym 435 in [B mim][CF3SO3]. The maximum yield (99.5%) in the microreactor was achieved in a short period of time (2.5h) with a flow rate of 2 μL/min, which kinetic constant Km was 16 times lower than that of a batch reactor. The results indicated that the use of a continuous-flow packed bed enzyme microreactor is an efficient method of producing propyl caffeate with an overall yield of 84.0%.

  12. Excited response of granular ores in vibrating field

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The dynamical theory was utilized to probe into the law of the excited response of granular ores generated by the exciting action of exciter and the influence of wave propagation in vibrating field. The exciter with double axes was presented as an example, and the principle of exciter and its mathematical expression of the excitation force were given. The granular ores have viscidity and damping speciality, on the basis of which the motion equation of excited response of ores was established and the approximate expression of mode-displacement by harmonic excitation and the steady effect solution of coordinate response were deduced. Utilizing the step-by-step integration method, the recursion relation matrix of displacement, velocity and acceleration of the excited response of ores were obtained, and the computational flow chart and a computational example were given. The results show that the excited response can change the dynamical character and the flowing characteristic of granular ores.

  13. Mechanics of Granular Materials (MGM) Flight Hardware

    Science.gov (United States)

    1997-01-01

    A test cell for the Mechanics of Granular Materials (MGM) experiment is shown in its on-orbit configuration in Spacehab during preparations for STS-89. The twin locker to the left contains the hydraulic system to operate the experiment. Sand and soil grains have faces that can cause friction as they roll and slide against each other, or even cause sticking and form small voids between grains. This complex behavior can cause soil to behave like a liquid under certain conditions such as earthquakes or when powders are handled in industrial processes. Mechanics of Granular Materials (MGM) experiments aboard the Space Shuttle use the microgravity of space to simulate this behavior under conditons that carnot be achieved in laboratory tests on Earth. MGM is shedding light on the behavior of fine-grain materials under low effective stresses. Applications include earthquake engineering, granular flow technologies (such as powder feed systems for pharmaceuticals and fertilizers), and terrestrial and planetary geology. Nine MGM specimens have flown on two Space Shuttle flights. Another three are scheduled to fly on STS-107. The principal investigator is Stein Sture of the University of Colorado at Boulder. Note: Because the image on the screen was muted in the original image, its brightness and contrast are boosted in this rendering to make the test cell more visible. Credit: NASA/Marshall Space Flight Center (MSFC)

  14. Accretion Dynamics on Wet Granular Materials.

    Science.gov (United States)

    Saingier, Guillaume; Sauret, Alban; Jop, Pierre

    2017-05-19

    Wet granular aggregates are common precursors of construction materials, food, and health care products. The physical mechanisms involved in the mixing of dry grains with a wet substrate are not well understood and difficult to control. Here, we study experimentally the accretion of dry grains on a wet granular substrate by measuring the growth dynamics of the wet aggregate. We show that this aggregate is fully saturated and its cohesion is ensured by the capillary depression at the air-liquid interface. The growth dynamics is controlled by the liquid fraction at the surface of the aggregate and exhibits two regimes. In the viscous regime, the growth dynamics is limited by the capillary-driven flow of liquid through the granular packing to the surface of the aggregate. In the capture regime, the capture probability depends on the availability of the liquid at the saturated interface, which is controlled by the hydrostatic depression in the material. We propose a model that rationalizes our observations and captures both dynamics based on the evolution of the capture probability with the hydrostatic depression.

  15. Speckle visibility spectroscopy and variable granular fluidization.

    Science.gov (United States)

    Dixon, P K; Durian, D J

    2003-05-09

    We introduce a dynamic light scattering technique capable of resolving motion that changes systematically, and rapidly, with time. It is based on the visibility of a speckle pattern for a given exposure duration. Applying this to a vibrated layer of glass beads, we measure the granular temperature and its variation with phase in the oscillation cycle. We observe several transitions involving jammed states, where the grains are at rest during some portion of the cycle. We also observe a two-step decay of the temperature on approach to jamming.

  16. The energetics of flow through a rapidly oscillating tube with slowly varying amplitude.

    Science.gov (United States)

    Whittaker, Robert J; Heil, Matthias; Waters, Sarah L

    2011-07-28

    Motivated by the problem of self-excited oscillations in fluid-filled collapsible tubes, we examine the flow structure and energy budget of flow through an elastic-walled tube. Specifically, we consider the case in which a background axial flow is perturbed by prescribed small-amplitude high-frequency long-wavelength oscillations of the tube wall, with a slowly growing or decaying amplitude. We use a multiple-scale analysis to show that, at leading order, we recover the constant-amplitude equations derived by Whittaker et al. (Whittaker et al. 2010 J. Fluid Mech. 648, 83-121. (doi:10.1017/S0022112009992904)) with the effects of growth or decay entering only at first order. We also quantify the effects on the flow structure and energy budget. Finally, we discuss how our results are needed to understand and predict an instability that can lead to self-excited oscillations in collapsible-tube systems.

  17. Using a Time Granularity Table for Gradual Granular Data Aggregation

    DEFF Research Database (Denmark)

    Iftikhar, Nadeem; Pedersen, Torben Bach

    2010-01-01

    The majority of today’s systems increasingly require sophisticated data management as they need to store and to query large amounts of data for analysis and reporting purposes. In order to keep more “detailed” data available for longer periods, “old” data has to be reduced gradually to save space...... is 6 months old aggregate to 2 minutes level from 1 minute level and so on. The proposed solution introduces a time granularity based data structure, namely a relational time granularity table that enables long term storage of old data by maintaining it at different levels of granularity and effective...

  18. Research progress of granular flow and fluidization behavior of coarse cohesive particles%黏结性粗颗粒流动与流态化的研究进展

    Institute of Scientific and Technical Information of China (English)

    李娜; 王嘉骏; 冯连芳; 顾雪萍

    2014-01-01

    在石油、化工、食品等多个领域经常需要处理黏结性粗颗粒,颗粒的黏结会严重影响生产效率。本文综述了黏结性粗颗粒的流动、流态化特性以及改善其流化性能的措施。阐述了粗颗粒间的黏结机理以及主要作用力(液体桥力和固体桥力)的研究进展:目前的研究采用实验和数值模拟两种方法,探究湿含量、流体黏度、操作压力等对黏结性粗颗粒的流动混合及其流态化的影响;改善黏结性粗颗粒流化性能主要有提高风速和改造装置等措施。分析表明,对于液体桥力的研究已经比较系统深入,而以固体桥力为主要黏结力的粗颗粒,其黏结机理还有待进一步的发展。指出随着高性能计算技术的发展,新的颗粒间作用力数学模型与离散单元法的耦合,将成为研究黏结性粗颗粒流动及流态化的重要方法。%Coarse cohesive particles have been widely used in petroleum , chemical and food industries,but the particle bond behavior would influence production efficiency. The granular flow and fluidization behavior of coarse cohesive particles were summarized,along with the measures to improve the fluidization characteristics. The bonding mechanism,in which the main inter-particle forces were liquid bridge forces and solid bridge forces,was reviewed. According to experimental and numerical studies,amount of moisture,liquid viscosity and temperature could influence the dynamic properties of coarse cohesive particles,and consequently industrial production. Besides,improvement measures of the fluidization characteristics,such as higher gas velocity,equipment modification,were commented. The analysis showed that liquid bridge forces have been researched more systematically and comprehensively,while the bonding mechanism of coarse cohesive particles with solid bridge forces as the main inter-particle forces should be further studied. As with the advance of high

  19. Maximum ceasing angle of inclination and flux formula for granular orifice flow%颗粒孔洞流的最大休止倾角和流量公式

    Institute of Scientific and Technical Information of China (English)

    彭政; 蒋亦民

    2011-01-01

    This work measured mass flux of a granular sample (glass beads) discharged from an inclined orifice for various inclination angles and orifice diameters. It is found that irrespective the orifice sizes, the fluxes all vary linearly with cosine of the inclination angle, and the linearly extrapolated angle of zero-flux, namely the critical angle of flow ceasing,increases linearly with ratio between grain and orifice diameter, tends to the angle of repose in the limit of infinite orifice diameter within an approximation of the Bagnold angle. The results show that the flux formula varying linearly with cosine of inclination angle is capable to reveal behaviors of the critical ceasing angle, a property that the Beverloo formula of which parameters vary with cosine of inclination angle can not describe.%实验测量了重力驱动下的玻璃珠颗粒样品通过不同倾角和孔径的圆形孔洞的卸载流量.发现无论孔径大小,流量均与倾角的余弦呈良好的线性关系;线性外推得到的零流量角,即流量休止临界角随颗粒粒径与孔洞直径之比的减小而线性增加;在无穷大孔径极限下,此临界角在Bagnold角的误差范围内与样品的安息角一致.这些结果表明流量随倾角余弦线性变化的经验公式能揭示临界角的行为和特性,这是参数随倾角变化的Beverloo公式所不能描述的.

  20. The influence of the fractal particle size distribution on the mobility of dry granular materials

    Directory of Open Access Journals (Sweden)

    Vallejo Luis E.

    2017-01-01

    Full Text Available This study presents an experimental analysis on the influence of the particle size distribution (psd on the mobility of dry granular materials. The psd obeys a power law of the form: N(L>d=kd-Df, where N is the number of particles with diameter L greater than a given diameter d, k is a proportionality constant, and Df is the fractal dimension of the psd. No laboratory or numerical study has been conducted to date analysing how a fractal psd influences the mobility of granular flows as in the case of rock avalanches. In this study, the flow characteristics of poly-dispersed granular materials that have a fractal psd were investigated in the laboratory. Granular mixtures having different fractal psd values were placed in a hollow cylinder. The cylinder was lifted and the distance of flow of the mixture was measured with respect to the original position of the cylinder. It was determined that the distance of flow of the mixtures was directly related to their fractal psd values. That is, the larger the distance of flow of the mixture, the larger is the fractal psd of the granular mixture tested. Thus, the fractal psd in dry granular mixtures seems to have a large influence on the easiness by which dry granular mixtures move in the field.

  1. Navier-Stokes hydrodynamics of thermal collapse in a freely cooling granular gas.

    Science.gov (United States)

    Kolvin, Itamar; Livne, Eli; Meerson, Baruch

    2010-08-01

    We show that, in dimension higher than one, heat diffusion and viscosity cannot arrest thermal collapse in a freely evolving dilute granular gas, even in the absence of gravity. Thermal collapse involves a finite-time blowup of the gas density. It was predicted earlier in ideal, Euler hydrodynamics of dilute granular gases in the absence of gravity, and in nonideal, Navier-Stokes granular hydrodynamics in the presence of gravity. We determine, analytically and numerically, the dynamic scaling laws that characterize the gas flow close to collapse. We also investigate bifurcations of a freely evolving dilute granular gas in circular and wedge-shaped containers. Our results imply that, in general, thermal collapse can only be arrested when the gas density becomes comparable with the close-packing density of grains. This provides a natural explanation to the formation of densely packed clusters of particles in a variety of initially dilute granular flows.

  2. Cross-hole tracer experiment reveals rapid fluid flow and low effective porosity in the upper oceanic crust

    Science.gov (United States)

    Neira, N. M.; Clark, J. F.; Fisher, A. T.; Wheat, C. G.; Haymon, R. M.; Becker, K.

    2016-09-01

    Numerous field, laboratory, and modeling studies have explored the flows of fluid, heat, and solutes during seafloor hydrothermal circulation, but it has been challenging to determine transport rates and flow directions within natural systems. Here we present results from the first cross-hole tracer experiment in the upper oceanic crust, using four subseafloor borehole observatories equipped with autonomous samplers to track the transport of a dissolved tracer (sulfur hexafluoride, SF6) injected into a ridge-flank hydrothermal system. During the first three years after tracer injection, SF6 was transported both north and south through the basaltic aquifer. The observed tracer transport rate of ∼2-3 m/day is orders of magnitude greater than bulk rates of flow inferred from thermal and chemical observations and calculated with coupled fluid-heat flow simulations. Taken together, these results suggest that the effective porosity of the upper volcanic crust through which much tracer was transported is <1%, with fluid flowing rapidly along a few well-connected channels. This is consistent with the heterogeneous (layered, faulted, and/or fractured) nature of the volcanic upper oceanic crust.

  3. A rapid fractionation method for heavy metals in soil by continuous-flow sequential extraction assisted by focused microwaves.

    Science.gov (United States)

    Nakazato, Tetsuya; Akasaka, Mikio; Tao, Hiroaki

    2006-11-01

    A microwave-assisted continuous-flow sequential extraction system was developed for rapid fractionation analysis of heavy metals in soil. Insertion of pressure-adjusted air between the extractants provided stable flows of the extractants without mutual mixing and back-pressure influence of a column packed with soil, thereby facilitating reliable continuous-flow extractions. In addition, use of pure water as a pumping solvent removed metal contamination because of direct contact between corrosive extractants and the pump containing metallic materials. Focused microwave irradiation to the soil accelerated the selective extractions of the acid-soluble and reducible fractions of heavy metals in soil in the first and second steps of the sequential extraction conditions, as defined by the Commission of the European Bureau of Reference (BCR). The microwave-assisted continuous-flow extraction provided high correlations in amounts of six heavy metals except Zn in the first step and Cu in the second step extracted from a reference sludge soil, BCR CRM 483, with a conventional batchwise extraction proposed by BCR; continuous-flow extraction assisted by conductive heating provided lower correlations for all the six metals. The proposed method drastically reduced the time required for the sequence extraction to ca. 65 min without losing accuracy and precision of the fractionation analysis of heavy metals in soil, whereas the BCR batchwise method requires ca. 33 h.

  4. Description and validation of a rapid (1 h) flow cytometry test for enumerating thermophilic bacteria in milk powders.

    Science.gov (United States)

    Flint, S; Walker, K; Waters, B; Crawford, R

    2007-04-01

    The aim of this study was to develop a rapid assay for enumerating thermophilic bacteria in milk powder. The BactiFlow flow cytometer was used to count bacteria based on esterase activity in viable bacterial cells. A protocol for total viable bacteria was modified by heat-treating the sample to selectively label thermophilic bacteria. Samples of milk powder dissolved in 0.1% peptone were treated with 0.8% ethylenediaminetetraacetic acid to reduce background interference because of denatured milk proteins. Either thermophilic bacteria were added to the dissolved milk powder or milk powder solutions were incubated at 55 degrees C for 2-3 h to enrich the natural thermophile population for testing. Results from the BactiFlow were compared with traditional plate count results. Thermophilic bacteria in milk powder can be enumerated within 1 h using the BactiFlow flow cytometer. Microbiological test results obtained within 1 h can potentially be used to monitor manufacturing processes, effectively trace problems and provide confidence in the manufacture of product.

  5. Dynamic Current Sheet Formation and Evolution with Application to Inter-(Super)granular Flow Lanes and Quasi-Homologous Jet Activity

    Science.gov (United States)

    Edmondson, Justin K.; Velli, M.

    2011-05-01

    The coronal magnetic field structure is an immensely complex system constantly driven away from equilibrium by global drivers such as photospheric flow, flux emergence/cancellation at the lower boundary, helicity injection and transport, etc. In low-beta plasma systems, such as solar corona, the Maxwell stresses dominate forces and therefore the system dynamics. General Poynting stress injection (i.e., flux injection, helicity injection, translational motions, or any combination thereof) results in (possibly large) geometric deformations of the magnetic field, such that the Maxwell stresses distribute as uniformly as possible, constrained by the distorted geometry and topology of the bounding separatricies. Since the topological connectivity is discontinuous across these separatrix surfaces, the magnetic stresses will be discontinuous there as well, manifesting as current sheets within the field. The solar magnetic field undergoes major geometric expansion passing from the photosphere, through the chromosphere, into the corona. No matter the specific details, a mixed polarity distribution at the lower boundary and the divergence-free condition require invariant topological features such as an X-line and separatricies to exist between fields emanating from separate regions of the photosphere. We present the results of fully-3D numerical simulations of a simplified low-beta model of this field expansion. A symmetric injection of Maxwell stresses into this geometry inflates strongly line-tied fields, generating a region of large current densities and magnetic energy dissipation. Elsewhere the injected stresses accumulate along the existing separatricies. There is no evidence of reconnection dynamics until after the initial left-right parity is broken. Once the symmetry breaks, the X-line deforms explosively into a Syrovatskii-type current sheet, leading to a succession of quasi-homologous jet dynamics. The bursty-oscillations of these jets occur as the stresses within

  6. Rapid continuous flow synthesis of high-quality silver nanocubes and nanospheres

    KAUST Repository

    Mehenni, Hakim

    2013-01-01

    We report a biphasic-liquid segmented continuous flow method for the synthesis of high-quality plasmonic single crystal silver nanocubes and nanospheres. The nanocubes were synthesized with controllable edge lengths from 20 to 48 nm. Single crystal nanospheres with a mean size of 29 nm were obtained by in-line continuous-flow etching of as-produced 39 nm nanocubes with an aqueous solution of FeNO3. In comparison to batch synthesis, the demonstrated processes represent highly scalable reactions, in terms of both production rate and endurance. The reactions were conducted in a commercially available flow-reactor system that is easily adaptable to industrial-scale production, facilitating widespread utilization of the procedure and the resulting nanoparticles. This journal is © The Royal Society of Chemistry 2013.

  7. Particle Dynamics and Rapid Trapping in Electro-Osmotic Flow Around a Sharp Microchannel Corner

    CERN Document Server

    Zehavi, Matan

    2014-01-01

    We study here the curious particle dynamics resulting from electro-osmotic flow around a microchannel junction corner whose dielectric walls are weakly polarizable. The hydrodynamic velocity field is obtained via superposition of a linear irrotational term associated with the equilibrium zeta potentials of both the microchannel and particle surfaces and the non-linear induced-charge electro-osmotic flow which originates from the interaction of the externally applied electric field on the charge cloud it induces at the solid-liquid interface. The particle dynamics are analyzed by considering dielectrophoretic forces via the addition of a mobility term to the flow field in the limit of Stokes drag law. The former, non-divergence free term is responsible for migration of particles towards the sharp microchannel junction corner, where they can potentially accumulate. Experimental observations of particle trapping for various applied electric fields and microparticle size are rationalized in terms of the growing r...

  8. Exact two-dimensionalization of rapidly rotating large-Reynolds-number flows

    CERN Document Server

    Gallet, Basile

    2015-01-01

    We consider the flow of a Newtonian fluid in a three-dimensional domain, rotating about a vertical axis and driven by a vertically invariant horizontal body-force. This system admits vertically invariant solutions that satisfy the 2D Navier-Stokes equation. At high Reynolds number and without global rotation, such solutions are usually unstable to three-dimensional perturbations. By contrast, for strong enough global rotation, we prove rigorously that the 2D (and possibly turbulent) solutions are stable to vertically dependent perturbations: the flow becomes 2D in the long-time limit. These results shed some light on several fundamental questions of rotating turbulence: for arbitrary Reynolds number and small enough Rossby number, the system is attracted towards purely 2D flow solutions, which display no energy dissipation anomaly and no cyclone-anticyclone asymmetry. Finally, these results challenge the applicability of wave turbulence theory to describe stationary rotating turbulence in bounded domains.

  9. Multi-Frequency Encoding for Rapid Color Flow and Quadroplex Imaging

    DEFF Research Database (Denmark)

    Oddershede, Niels; Gran, Fredrik; Jensen, Jørgen Arendt

    2007-01-01

    Ultrasonic color flow maps are made by estimating the velocities line by line over the region of interest. For each velocity estimate, multiple repetitions are needed. This sets a limit on the frame rate, which becomes increasingly severe when imaging deeper lying structures or when simultaneously...... acquiring spectrogram data for triplex imaging. This paper proposes a method for decreasing the data acquisition time by simultaneously sampling multiple lines at different spatial positions for the color flow map using narrow band signals with disjoint spectral support. The signals are separated...... in the receiver by filters matched to the emitted waveforms and the autocorrelation estimator is applied. Alternatively, one spectral band can be used for creating a color flow map, while data for a number of spectrograms are acquired simultaneously. Using three disjoint spectral bands, this will result...

  10. Tapped granular column dynamics: simulations, experiments and modeling

    NARCIS (Netherlands)

    Rosato, A.D.; Zuo, L.; Blackmore, D.; Wu, H.; Horntrop, D.J.; Parker, D.J.; Windows-Yule, C.R.

    2015-01-01

    This paper communicates the results of a synergistic investigation that initiates our long term research goal of developing a continuum model capable of predicting a variety of granular flows. We consider an ostensibly simple system consisting of a column of inelastic spheres subjected to discrete t

  11. Kinetics and mass transfer phenomena in anaerobic granular sludge

    NARCIS (Netherlands)

    Gonzalez-Gil, G.; Seghezzo, L.; Lettinga, G.; Kleerebezem, R.

    2001-01-01

    The kinetic properties of acetate-degrading methanogenic granular sludge of different mean diameters were assessed at different up-flow velocities (Vup). Using this approach, the influence of internal and external mass transfer could be estimated. First, the apparent Monod constant (KS) for each dat

  12. Interface stability of granular filter structures under currents

    NARCIS (Netherlands)

    Verheij, H.J.; Hoffmans, G.; Dorst, K.; Van de Sande, S.

    2012-01-01

    Granular filters are used for protection of structures against scour and erosion. For a proper functioning it is necessary that the interfaces between the filter structure, the subsoil and the water flowing above the filter structure are stable. Stability means that there is no transport of subsoil

  13. Solitary granular avalanches: stability, fingering and theoretical modeling

    Science.gov (United States)

    Malloggi, Florent; Andreotti, Bruno; Clément, Eric; Aronson, Igor; Tsimring, Lev

    2008-03-01

    Avalanching processes do not only occur in the air as we know of snow avalanches, mud flows and land-slides. Such events frequently happen below the see level as they take many forms from turbidity currents to thick sediment waves. In this study we report results on laboratory scale avalanche experiments taking place both in the air and under-water. In both cases a family of stable solitary erosion/deposition waves is observed [1]. At higher inclination angles, we show the existence of a long wavelength transverse instability followed by a coarsening and the onset of a fingering pattern. While the experiments strongly differ by the spatial and time scales, the agreement between the stability diagrams, the wavelengths selection and the avalanche morphology suggest a common erosion/deposition scenario. We also use these erosion/deposition waves to investigate the dynamics of granular flow and jamming in the frame work of the Partial Fluidization Theory (PFT) proposed by Aronson et al. to describe the dynamics of granular matter near jamming [2]. [1] F. Malloggi et al. Europhysics Letters, 2006, Erosion waves: Transverse instabilities and fingering 75, 825-831 [2] I. S. Aranson et al.. Transverse instability of avalanches in granular flows down an incline. Physical Review E, 2006, 73, 050302; I.S.Aronson et al., Non rheological properties of granular flows: exploring the near jamming limit, preprint (2007).

  14. Interface stability of granular filter structures under currents

    NARCIS (Netherlands)

    Verheij, H.J.; Hoffmans, G.; Dorst, K.; Van de Sande, S.

    2012-01-01

    Granular filters are used for protection of structures against scour and erosion. For a proper functioning it is necessary that the interfaces between the filter structure, the subsoil and the water flowing above the filter structure are stable. Stability means that there is no transport of subsoil

  15. Laser flow microphotometry for rapid analysis and sorting of mammalian cells. [X and gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Mullaney, P.F.; Steinkamp, J.A.; Crissman, H.A.; Cram, L.S.; Crowell, J.M.; Salzman, G.C.; Martin, J.C.; Price, B.

    1976-01-01

    Quantitative precision measurements can be made of the optical properties of individual mammalian cells using flow microphotometry. Suspended cells pass through a special flow chamber where they are lined up for exposure to blue light from an argon-ion laser. As each cell crosses the laser beam, it produces one or more optical pulses of a duration equal to cell transit time across the beam. These pulses are detected, amplified, and analyzed using the techniques of gamma ray spectroscopy. Quantitative DNA distributions made it possible to distinguish tumor cells from normal cells as well as to assay for radiation effects on tumor cells subjected to x and gamma radiation. (HLW)

  16. Building designed granular towers one drop at a time.

    Science.gov (United States)

    Chopin, Julien; Kudrolli, Arshad

    2011-11-11

    A dense granular suspension dripping on an imbibing surface is observed to give rise to slender mechanically stable structures that we call granular towers. Successive drops of grain-liquid mixtures are shown to solidify rapidly upon contact with a liquid absorbing substrate. A balance of excess liquid flux and drainage rate is found to capture the typical growth and height of the towers. The tower width is captured by the Weber number, which gives the relative importance of inertia and capillary forces. Various symmetric, smooth, corrugated, zigzag, and chiral structures are observed by varying the impact velocity and the flux rate from droplet to jetting regime.

  17. EFFECTS OF REACTOR CONDITIONS ON ELECTROCHEMICAL DECHLORINATION OF TRICHLOROETHYLENE USING GRANULAR-GRAPHITE ELECTRODE.

    Science.gov (United States)

    Trichloroethylene (TCE) was electrochemically dechlorinated in aqueous environments using granular graphite cathode in a mixed reactor. Effects of pH, current, electrolyte type, and flow rate on TCE dechlorination rate were evaluated. TCE dechlorination rate constant and gas pr...

  18. Elliptic flow at forward rapidity in the square root of sNN = 200 GeV gold + gold collisions

    Science.gov (United States)

    Richardson, Eric Michael

    Forward rapidity elliptic flow (v2) of both unidentified charged hadrons and decay muons has been measured from sNN = 200 GeV Au+Au collisions as a function of pseudorapidity (η), transverse momentum, and number of nucleon collision participants. The measurements were performed at Brookhaven National Laboratory's Relativistic Heavy Ion Collider using the PHENIX experiment's Muon Arm spectrometers, located at 1.2 BRAHMS measurements (η ≈ 3) is a v2 suppression seen for central collisions. For increasingly peripheral collisions, a growing suppression in v2 is observed for the Muon Arm measurements compared to mid-rapidity, indicating increased changes in the medium properties of ever smaller systems. For peripheral collisions of the same/similar centralities, an increased suppression is observed toward forward η.

  19. Flow induced dispersion analysis rapidly quantifies proteins in human plasma samples

    DEFF Research Database (Denmark)

    Poulsen, Nicklas N; Andersen, Nina Z; Østergaard, Jesper;

    2015-01-01

    to cumbersome and expensive assay development. In this work a new approach for quantification based on changes in diffusivity is presented. The apparent diffusivity of an indicator molecule interacting with the protein of interest is determined by Taylor Dispersion Analysis (TDA) in a hydrodynamic flow system...

  20. Rapid and enhanced activation of microporous coordination polymers by flowing supercritical CO.sub.2

    Science.gov (United States)

    Matzger, Adam J.; Liu, Baojian; Wong-Foy, Antek G.

    2016-07-19

    Flowing supercritical CO.sub.2 is used to activate metal organic framework materials (MOF). MOFs are activated directly from N,N-dimethylformamide (DMF) thus avoiding exchange with a volatile solvent. Most MCPs display increased surface areas directly after treatment although those with coordinatively unsaturated metal centers benefit from additional heating.

  1. Flow Behaviors of Gas-Solid Injector by 3D Simulation with Kinetic Theory of Granular Flow%基于颗粒动理学的气固喷射器流动特性三维数值模拟

    Institute of Scientific and Technical Information of China (English)

    王小芳; 金保升; 熊源泉; 钟文琪

    2008-01-01

    A computational study on the flow behavior of a gas-solid injector by Eulerian approach was carried out. The gas phase was modeled with k-ε turbulent model and the particle phase was modeled with kinetic theory of granular flow. The simulations by Eulerian two-fluid model (TFM) were compared with the corresponding results by discrete element method (DEM) and experiments. It was showed that TFM simulated results were in reasonable agreement with the experimental and DEM simulated results. Based on TFM simulations, gas-solid flow pattern, gas velocity, particle velocity and the static pressure under different driving jet velocity, backpressure and convergent section angle were obtained. The results showed that the time average axial gas velocity sharply decreased and then slightly increased to a constant value in the horizontal conveying pipe. The time average axial particle velocity increased initially and then decreased, but in the outlet region of the convergent section the particle velocity remarkably increased once more to the maximal value. As a whole, the static pressure distribution change trends were found to be independent on driving gas velocity, backpressure and convergent section angle. However, the static pressure increased with increase of convergent section angle and gas jet velocities. The difference of static pressure to backpressure increased with increasing backpressure.

  2. A hybrid CFD-DSMC model designed to simulate rapidly rarefying flow fields and its application to physical vapor deposition

    Science.gov (United States)

    Gott, Kevin

    This research endeavors to better understand the physical vapor deposition (PVD) vapor transport process by determining the most appropriate fluidic model to design PVD coating manufacturing. An initial analysis was completed based on the calculation of Knudsen number from titanium vapor properties. The results show a dense Navier-Stokes solver best describes flow near the evaporative source, but the material properties suggest expansion into the chamber may result in a strong drop in density and a rarefied flow close to the substrate. A hybrid CFD-DSMC solver is constructed in OpenFOAM for rapidly rarefying flow fields such as PVD vapor transport. The models are patched together combined using a new patching methodology designed to take advantage of the one-way motion of vapor from the CFD region to the DSMC region. Particles do not return to the dense CFD region, therefore the temperature and velocity can be solved independently in each domain. This novel technique allows a hybrid method to be applied to rapidly rarefying PVD flow fields in a stable manner. Parameter studies are performed on a CFD, Navier-Stokes continuum based compressible solver, a Direct Simulation Monte Carlo (DSMC) rarefied particle solver, a collisionless free molecular solver and the hybrid CFD-DSMC solver. The radial momentum at the inlet and radial diffusion characteristics in the flow field are shown to be the most important to achieve an accurate deposition profile. The hybrid model also shows sensitivity to the shape of the CFD region and rarefied regions shows sensitivity to the Knudsen number. The models are also compared to each other and appropriate experimental data to determine which model is most likely to accurately describe PVD coating deposition processes. The Navier-Stokes solvers are expected to yield backflow across the majority of realistic inlet conditions, making their physics unrealistic for PVD flow fields. A DSMC with improved collision model may yield an accurate

  3. Forward-rapidity azimuthal and radial flow of identified particles for s=200 GeV Au+Au collisions

    Science.gov (United States)

    Brahms Collaboration; Sanders, S. J.; BRAHMS Collaboration

    2009-11-01

    A strong azimuthal flow signature at RHIC suggests rapid system equilibration leading to an almost perfect fluid state. The longitudinal extent of the flow behavior depends on how this state is formed and can be studied by measuring the pseudorapidity and transverse momentum dependence of the second Fourier component (ν(p)) of the azimuthal angular distribution. We report on a measurement of identified-particle ν as a function of p(0.5-2.0 GeV/c), centrality (0-25%, 25-50%), and pseudorapidity (0⩽ηBRAHMS spectrometers are used for particle identification (π, K, p) and momentum determination and the BRAHMS global detectors are used to determine the corresponding reaction-plane angles. The results are discussed in terms of the pseudorapidity dependence of constituent quark scaling and in terms of models that develop the complete (azimuthal and radial) hydrodynamic aspects of the forward dynamics at RHIC.

  4. Advanced Granular System Modeling Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Spaceports of the future will utilize new granular materials in unique applications including insulation for cryogenic tanks and Lunar regolith processing for usable...

  5. Stress distribution and surface instability of an inclined granular layer

    Institute of Scientific and Technical Information of China (English)

    Zheng He-Peng; Jiang Yi-Min; Peng Zheng

    2013-01-01

    Static granular materials may avalanche suddenly under continuous quasi-static drives.This phenomenon,which is important in many engineering applications,can be explained by analyzing the stability of the elastic solutions.We show this for a granular layer driven by its inclination angle in gravity,where the elastic problem can be solved generally and analytically.It is found that a loss of stability may occur only at the free surface of the layer.This result is considered to be relevant for understanding surface avalanches and the flows observed experimentally.

  6. Rapid Sedimentation, Overpressure, and Focused Fluid Flow, Gulf of Mexico Continental Margin

    Directory of Open Access Journals (Sweden)

    Cédric M. John

    2006-09-01

    Full Text Available Expedition 308 of the Integrated Ocean Drilling Program (IODP was the fi rst phase of a two-component project dedicated to studying overpressure and fl uid fl ow on the continental slope of the Gulf of Mexico. We examined how sedimentation, overpressure, fl uid fl ow, and deformation are coupled in a passive margin setting and investigated how extremely rapid deposition of fi ne-grained mud might lead to a rapid build-up of pore pressure in excess of hydrostatic (overpressure, underconsolidation, and sedimentary masswasting. Our tests within the Ursa region, where sediment accumulated rapidly in the late Pleistocene, included the first-ever in situ measurements of how physical properties, pressure, temperature,and pore fluid compositions vary within low-permeability mudstones that overlie a permeable, overpressured aquifer, and we documented severe overpressure in the mudstones overlying the aquifer. We also drilled and logged three references sites in the Brazos-Trinity Basin IV and documented hydrostatic pressure conditions and normalconsolidation. Post-expedition studies will address how the generation and timing of overpressure control slope stability, seafl oor seeps, and large-scale crustal fluid fl ow. The operations ofExpedition 308 provide a foundation for future long-term in situ monitoring experiments in the aquifer and bounding mudstones.

  7. Rapid and sensitive lateral flow immunoassay method for determining alpha fetoprotein in serum using europium (III) chelate microparticles-based lateral flow test strips.

    Science.gov (United States)

    Liang, Rong-Liang; Xu, Xu-Ping; Liu, Tian-Cai; Zhou, Jian-Wei; Wang, Xian-Guo; Ren, Zhi-Qi; Hao, Fen; Wu, Ying-Song

    2015-09-01

    Alpha-fetoprotein (AFP), a primary marker for many diseases including various cancers, is important in clinical tumor diagnosis and antenatal screening. Most immunoassays provide high sensitivity and accuracy for determining AFP, but they are expensive, often complex, time-consuming procedures. A simple and rapid point-of-care system that integrates Eu (III) chelate microparticles with lateral flow immunoassay (LFIA) has been developed to determine AFP in serum with an assay time of 15 min. The approach is based on a sandwich immunoassay performed on lateral flow test strips. A fluorescence strip reader was used to measure the fluorescence peak heights of the test line (HT) and the control line (HC); the HT/HC ratio was used for quantitation. The Eu (III) chelate microparticles-based LFIA assay exhibited a wide linear range (1.0-1000 IU mL(-1)) for AFP with a low limit of detection (0.1 IU mL(-1)) based on 5ul of serum. Satisfactory specificity and accuracy were demonstrated and the intra- and inter-assay coefficients of variation (CV) for AFP were both chelate microparticles-based LFIA system provided a rapid, sensitive and reliable method for determining AFP in serum, indicating that it would be suitable for development in point-of-care testing.

  8. Localizing energy in granular materials

    CERN Document Server

    Przedborski, Michelle A; Sen, Surajit

    2016-01-01

    A device for absorbing and storing short duration impulses in an initially uncompressed one-dimensional granular chain is presented. Simply stated, short regions of sufficiently soft grains are embedded in a hard granular chain. These grains exhibit long-lived standing waves of predictable frequencies regardless of the timing of the arrival of solitary waves from the larger matrix. We explore the origins, symmetry, and energy content of the soft region and its intrinsic modes.

  9. A new methodology to simulate subglacial deformation of water-saturated granular material

    Science.gov (United States)

    Damsgaard, A.; Egholm, D. L.; Piotrowski, J. A.; Tulaczyk, S.; Larsen, N. K.; Brædstrup, C. F.

    2015-11-01

    The dynamics of glaciers are to a large degree governed by processes operating at the ice-bed interface, and one of the primary mechanisms of glacier flow over soft unconsolidated sediments is subglacial deformation. However, it has proven difficult to constrain the mechanical response of subglacial sediment to the shear stress of an overriding glacier. In this study, we present a new methodology designed to simulate subglacial deformation using a coupled numerical model for computational experiments on grain-fluid mixtures. The granular phase is simulated on a per-grain basis by the discrete element method. The pore water is modeled as a compressible Newtonian fluid without inertia. The numerical approach allows close monitoring of the internal behavior under a range of conditions. Our computational experiments support the findings of previous studies where the rheology of a slowly deforming water-saturated granular bed in the steady state generally conforms to the rate-independent plastic rheology. Before this so-called critical state, deformation is in many cases accompanied by volumetric changes as grain rearrangement in active shear zones changes the local porosity. For previously consolidated beds porosity increases can cause local pore-pressure decline, dependent on till permeability and shear rate. We observe that the pore-water pressure reduction strengthens inter-granular contacts, which results in increased shear strength of the granular material. In contrast, weakening takes place when shear deformation causes consolidation of dilated sediments or during rapid fabric development. Both processes of strengthening and weakening depend inversely on the sediment permeability and are transient phenomena tied to the porosity changes during the early stages of shear. We find that the transient strengthening and weakening in turn influences the distribution of shear strain in the granular bed. Dilatant strengthening has the ability to distribute strain during

  10. Double-Humped Transverse Density Profile in Two-Dimensional Chute Flow with Rough Sidewalls

    Institute of Scientific and Technical Information of China (English)

    HU Guo-Qi; ZHANG Xun-Sheng; BAO De-Song; TANG Xiao-Wei

    2006-01-01

    @@ We study a two-dimensional granular rapid flow with rough sidewalls stuck with the same size discs by molecular dynamics simulation. A transient state of the double-humped density profile in the flowing process has been found, which appears and moves as travelling wave and is the same as the phenomena in the recent experiments [Acta Phys. Sin. 53 (2004) 3389 (in Chinese)].

  11. A rapid and robust tri-color flow cytometry assay for monitoring malaria parasite development.

    Science.gov (United States)

    Malleret, Benoît; Claser, Carla; Ong, Alice Soh Meoy; Suwanarusk, Rossarin; Sriprawat, Kanlaya; Howland, Shanshan Wu; Russell, Bruce; Nosten, Francois; Rénia, Laurent

    2011-01-01

    Microscopic examination of Giemsa-stained thin blood smears remains the gold standard method used to quantify and stage malaria parasites. However, this technique is tedious, and requires trained microscopists. We have developed a fast and simple flow cytometry method to quantify and stage, various malaria parasites in red blood cells in whole blood or in vitro cultured Plasmodium falciparum. The parasites were stained with dihydroethidium and Hoechst 33342 or SYBR Green I and leukocytes were identified with an antibody against CD45. Depending on the DNA stains used, samples were analyzed using different models of flow cytometers. This protocol, which does not require any washing steps, allows infected red blood cells to be distinguished from leukocytes, as well as allowing non-infected reticulocytes and normocytes to be identified. It also allows assessing the proportion of parasites at different developmental stages. Lastly, we demonstrate how this technique can be applied to antimalarial drug testing.

  12. Rapid antioxidant capacity screening in herbal extracts using a simple flow injection-spectrophotometric system.

    Science.gov (United States)

    Mrazek, Nookrai; Watla-iad, Kanchana; Deachathai, Suwanna; Suteerapataranon, Siripat

    2012-05-01

    A simple flow injection (FI)-spectrophotometric system for the screening of antioxidant capacity in herbal extracts was developed. The analysis was based on the color disappearance due to the scavenging of 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical by antioxidant compounds. DPPH and ascorbic acid were used as reagent and antioxidant standard, respectively. Effects of the DPPH concentration, DPPH flow rate, and reaction coil length on sensitivity were studied. The optimized condition provided the linear range of 0.010-0.300mM ascorbic acid with less than 5%RSD(n=10). Detection limit and quantitation limit were 0.004 and 0.013mM, respectively. Comparison of antioxidant capacity in some herbal extracts determined by the FI system and a standard method was carried out and no significant difference was obtained.

  13. Flow injection based microfluidic device with carbon nanotube electrode for rapid salbutamol detection.

    Science.gov (United States)

    Karuwan, Chanpen; Wisitsoraat, Anurat; Maturos, Thitima; Phokharatkul, Disayut; Sappat, Assawapong; Jaruwongrungsee, Kata; Lomas, Tanom; Tuantranont, Adisorn

    2009-09-15

    A microfabicated flow injection device has been developed for in-channel electrochemical detection (ECD) of a beta-agonist, namely salbutamol. The microfluidic system consists of PDMS (polydimethylsiloxane) microchannel and electrochemical electrodes formed on glass substrate. The carbon nanotube (CNT) on gold layer as working electrode, silver as reference electrode and platinum as auxiliary electrode were deposited on a glass substrate. Silver, platinum, gold and stainless steel catalyst layers were coated by DC-sputtering. CNTs were then grown on the glass substance by thermal chemical vapor deposition (CVD) with gravity effect and water-assisted etching. 100-microm-deep and 500-microm-wide PDMS microchannels fabricated by SU-8 molding and casting were then bonded on glass substrate by oxygen plasma treatment. Flow injection and ECD of salbutamol was performed with the amperometric detection mode for in-channel detection of salbutamol. The influences of flow rate, injection volume, and detection potential on the response of current signal were optimized. Analytical characteristics, such as sensitivity, repeatability and dynamic range have been evaluated. Fast and highly sensitive detection of salbutamol have been achieved. Thus, the proposed combination of the efficient CNT electrode and miniaturized lab-on-a-chip is a powerful platform for beta-agonists detection.

  14. A Terradynamics of Legged Locomotion on Granular Media

    CERN Document Server

    Li, Chen; Goldman, Daniel I; 10.1126/science.1229163

    2013-01-01

    The theories of aero- and hydrodynamics predict animal movement and device design in air and water through the computation of lift, drag, and thrust forces. Although models of terrestrial legged locomotion have focused on interactions with solid ground, many animals move on substrates that flow in response to intrusion. However, locomotor-ground interaction models on such flowable ground are often unavailable. We developed a force model for arbitrarily-shaped legs and bodies moving freely in granular media, and used this "terradynamics" to predict a small legged robot's locomotion on granular media using various leg shapes and stride frequencies. Our study reveals a complex but generic dependence of stresses in granular media on intruder depth, orientation, and movement direction and gives insight into the effects of leg morphology and kinematics on movement.

  15. Granular chaos and mixing: Whirled in a grain of sand

    Energy Technology Data Exchange (ETDEWEB)

    Shinbrot, Troy, E-mail: shinbrot@rutgers.edu [Department of Biomedical Engineering, Rutgers University, Piscataway, New Jersey 08854 (United States)

    2015-09-15

    In this paper, we overview examples of chaos in granular flows. We begin by reviewing several remarkable behaviors that have intrigued researchers over the past few decades, and we then focus on three areas in which chaos plays an intrinsic role in granular behavior. First, we discuss pattern formation in vibrated beds, which we show is a direct result of chaotic scattering combined with dynamical dissipation. Next, we consider stick-slip motion, which involves chaotic scattering on the micro-scale, and which results in complex and as yet unexplained peculiarities on the macro-scale. Finally, we examine granular mixing, which we show combines micro-scale chaotic scattering and macro-scale stick-slip motion into behaviors that are well described by dynamical systems tools, such as iterative mappings.

  16. Explaination of nonlocal granular fluidity in terms of microscopic fluctuations

    Science.gov (United States)

    Zhang, Qiong; Kamrin, Ken

    A recently proposed granular constitutive law has shown capability to predict nonlocal granular rheology using a variable denoted ``granular fluidity''. This work is aimed at finding the microscopic physical meaning of fluidity in terms of fluctuations such as fluctuation of normalized shear stress and fluctuation of velocity. We try to predict the fluidity as a function of the fluctuation of normalized shear stress, and also test Eyring equation and kinetic theory based on the theoretical prediction proposed in other work. We find a consistent definition for the fluidity to be proportional to the product of the velocity fluctuations and some function of packing fraction divided by the average diameter of the grains. This definition shows predictive ability in multiple geometries for which flow behavior is nonlocal. It is notable that the fluidity is well-defined as a function of kinematic state variables, as one would hope for a quantity of this nature.

  17. Human regional cerebral blood flow during rapid-eye-movement sleep

    DEFF Research Database (Denmark)

    Madsen, P L; Holm, S; Vorstrup, S;

    1991-01-01

    Owing to the coupling between CBF and neuronal activity, regional CBF is a reflection of neural activity in different brain regions. In this study we measured regional CBF during polysomnographically well-defined rapid-eye-movement (REM) sleep by the use of single photon emission computerized...... tomography and the new tracer 99mTc-dl-hexamethylpropyleneamine. Eleven healthy volunteers aged between 22 and 27 years were studied. CBF was measured on separate nights during REM sleep and during EEG-verified wakefulness. On awakening from REM sleep, all subjects reported visual dreams. During REM sleep...

  18. Subharmonic instability of a self-organized granular jet.

    Science.gov (United States)

    Kollmer, J E; Pöschel, T

    2016-03-22

    Downhill flows of granular matter colliding in the lowest point of a valley, may induce a self-organized jet. By means of a quasi two-dimensional experiment where fine grained sand flows in a vertically sinusoidally agitated cylinder, we show that the emergent jet, that is, a sheet of ejecta, does not follow the frequency of agitation but reveals subharmonic response. The order of the subharmonics is a complex function of the parameters of driving.

  19. Size segregation in a granular bore

    Science.gov (United States)

    Edwards, A. N.; Vriend, N. M.

    2016-10-01

    We investigate the effect of particle-size segregation in an upslope propagating granular bore. A bidisperse mixture of particles, initially normally graded, flows down an inclined chute and impacts with a closed end. This impact causes the formation of a shock in flow thickness, known as a granular bore, to travel upslope, leaving behind a thick deposit. This deposit imprints the local segregated state featuring both pure and mixed regions of particles as a function of downstream position. The particle-size distribution through the depth is characterized by a thin purely small-particle layer at the base, a significant linear transition region, and a thick constant mixed-particle layer below the surface, in contrast to previously observed S-shaped steady-state concentration profiles. The experimental observations agree with recent progress that upward and downward segregation of large and small particles respectively is asymmetric. We incorporate the three-layer, experimentally observed, size-distribution profile into a depth-averaged segregation model to modify it accordingly. Numerical solutions of this model are able to match our experimental results and therefore motivate the use of a more general particle-size distribution profile.

  20. Magnetic resonance imaging of granular materials

    Science.gov (United States)

    Stannarius, Ralf

    2017-05-01

    Magnetic Resonance Imaging (MRI) has become one of the most important tools to screen humans in medicine; virtually every modern hospital is equipped with a Nuclear Magnetic Resonance (NMR) tomograph. The potential of NMR in 3D imaging tasks is by far greater, but there is only "a handful" of MRI studies of particulate matter. The method is expensive, time-consuming, and requires a deep understanding of pulse sequences, signal acquisition, and processing. We give a short introduction into the physical principles of this imaging technique, describe its advantages and limitations for the screening of granular matter, and present a number of examples of different application purposes, from the exploration of granular packing, via the detection of flow and particle diffusion, to real dynamic measurements. Probably, X-ray computed tomography is preferable in most applications, but fast imaging of single slices with modern MRI techniques is unmatched, and the additional opportunity to retrieve spatially resolved flow and diffusion profiles without particle tracking is a unique feature.

  1. Discrete particle modelling of granular roll waves

    Science.gov (United States)

    Tsang, Jonathan; Dalziel, Stuart; Vriend, Nathalie

    2016-11-01

    A granular current flowing down an inclined chute or plane can undergo an instability that leads to the formation of surface waves, known as roll waves. Examples of roll waves are found in avalanches and debris flows in landslides, and in many industrial processes. Although related to the Kapitza instability of viscous fluid films, granular roll waves are not yet as well understood. Laboratory experiments typically measure the surface height and velocity of a current as functions of position and time, but they do not give insight into the processes below the surface: in particular, the possible formation of a boundary layer at the free surface as well as the base. To overcome this, we are running discrete particle model (DPM) simulations. Simulations are validated against our laboratory experiments, but they also allow us to examine a much larger range of parameters, such as material properties, chute geometry and particle size dispersity, than that which is possible in the lab. We shall present results from simulations in which we vary particle size and dispersity, and examine the implications on roll wave formation and propagation. Future work will include simulations in which the shape of the chute is varied, both cross-sectionally and in the downstream direction. EPSRC studentship (Tsang) and Royal Society Research Fellowship (Vriend).

  2. Development of an immunochromatographic lateral flow device for rapid diagnosis of Vibrio cholerae O1 serotype Ogawa.

    Science.gov (United States)

    Chen, Weixian; Zhang, Jun; Lu, Gang; Yuan, Zuowei; Wu, Qian; Li, Jingjing; Xu, Guiping; He, An; Zheng, Jian; Zhang, Juan

    2014-04-01

    Cholera is an acute malignant infectious disease caused by the bacteria Vibrio cholerae leading to severe dehydrating diarrhea and vomiting, even high rates of mortality in some cases. However, the prevention of the epidemic disease is achievable if proper sanitation practices are followed, provided the accurate and prompt diagnosis of each prevalent serotype in cholera epidemic. The current gold standard of bacterial culture is inadequate for rapid diagnosis. Our aim is to develop an immunochromatographic test format for O1 serotype Ogawa diagnosis and provide the need for better epidemic prevention and early response. The monoclonal antibodies were raised in conventional method and subsequently screened for a match pair. A variety of related and unrelated bacteria strains recruited were employed to test their sensitivity, specificity etc. by indirect ELISA. The human fecal samples were used to test the final lateral-flow device product to satisfy the measurement requirement. A new monoclonal antibody (McAb) pair, named IXiao₃G₆ and IXiao₁D₉, was generated, which is specifically against V. cholerae O1 serotype Ogawa. Additionally, we developed an immunochromatographic lateral flow device (LFD) using this McAb pair for the highly specific and rapid (5 min) detection of Ogawa. Our product has advantages of simplicity and precision, and can benefit the scene and elementary medical institutions. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  3. An aptamer based lateral flow strip for on-site rapid detection of ochratoxin A in Astragalus membranaceus.

    Science.gov (United States)

    Zhou, Weilu; Kong, Weijun; Dou, Xiaowen; Zhao, Ming; Ouyang, Zhen; Yang, Meihua

    2016-06-01

    An aptamer based lateral flow strip based on competitive format was developed for on-site rapid detection of ochratoxin A (OTA) in Astragalus membranaceus. Some crucial parameters that might influence the sensitive detection, such as the characterization of the colloidal gold, size and shape of gold nanoparticles (AuNPs), amount of AuNPs-aptamer conjugate, migration rate and the addition amount of methanol, were investigated to provide the optimum assay performance. To perform the test, 1g sample was extracted with 2.5mL of methanol-water (80:20, v/v) and diluted by 4-fold running buffer to eliminate the matrix and methanol interferences. Under optimized conditions, the aptamer-based assay showed a visual limit of detection (LOD) of 1ngmL(-1), and with no significant cross-reactivity with several homologous toxins. The whole detection could be completed within 15min without special equipment because of available visual results. One out of nine A. membranaceus samples was found to be positive of OTA, which was in a good agreement with those obtained from LC-MS/MS analysis. The results demonstrated that the aptamer-based lateral flow assay could be used as a rapid, reliable, cost-effective and robust on-site screening technique for mycotoxins at trace level in complex matrices without special instrumentation.

  4. Multiparametric flow cytometry allows rapid assessment and comparison of lactic acid bacteria viability after freezing and during frozen storage.

    Science.gov (United States)

    Rault, Aline; Béal, Catherine; Ghorbal, Sarrah; Ogier, Jean-Claude; Bouix, Marielle

    2007-08-01

    Freezing is widely used for the long-term preservation of lactic acid bacteria, but often affects their viability and technological properties. Different methods are currently employed to determine bacterial cryotolerance, but they all require several hours or days before achieving results. The aim of this study was to establish the advantages of multiparametric flow cytometry by using two specific fluorescent probes to provide rapid assessment of the viability of four strains of Lactobacillus delbrueckii after freezing and during frozen storage. The relevance of carboxyfluorescein diacetate and propidium iodide to quantify bacterial viability was proven. When bacterial suspensions were simultaneously stained with these two fluorescent probes, three major subpopulations were identified: viable, dead and injured cells. The cryotolerance of four L. delbrueckii strains was evaluated by quantifying the relative percentages of each subpopulation before and after freezing, and throughout one month of storage at -80 degrees C. Results displayed significant differences in the resistance to freezing and frozen storage of the four strains when they were submitted to the same freezing and storage procedures. Whereas resistant strains displayed less than 10% of dead cells after one month of storage, one sensitive strain exhibited more than 50% of dead cells, together with 14% of stressed cells after freezing. Finally, this study proved that multiparametric flow cytometry was a convenient and rapid tool to evaluate the viability of lactic acid bacteria, and was well correlated with plate count results. Moreover, it made it possible to differentiate strains according to their susceptibility to freezing and frozen storage.

  5. The role of event water, a rapid shallow flow component, and catchment size in summer stormflow

    Science.gov (United States)

    Brown, V.A.; McDonnell, Jeffery J.; Burns, Douglas A.; Kendall, C.

    1999-01-01

    Seven nested headwater catchments (8 to 161 ha) were monitored during five summer rain events to evaluate storm runoff components and the effect of catchment size on water sources. Two-component isotopic hydrograph separation showed that event-water contributions near the time of peakflow ranged from 49% to 62% in the 7 catchments during the highest intensity event. The proportion of event water in stormflow was greater than could be accounted for by direct precipitation onto saturated areas. DOC concentrations in stormflow were strongly correlated with stream 18O composition. Bivariate mixing diagrams indicated that the large event water contributions were likely derived from flow through the soil O-horizon. Results from two-tracer, three-component hydrograph separations showed that the throughfall and O-horizon soil-water components together could account for the estimated contributions of event water to stormflow. End-member mixing analysis confirmed these results. Estimated event-water contributions were inversely related to catchment size, but the relation was significant for only the event with greatest rainfall intensity. Our results suggest that perched, shallow subsurface flow provides a substantial contribution to summer stormflow in these small catchments, but the relative contribution of this component decreases with catchment size.Seven nested headwater catchments (8 to 161 ha) were monitored during five summer rain events to evaluate storm runoff components and the effect of catchment size on water sources. Two-component isotopic hydrograph separation showed that event-water contributions near the time of peakflow ranged from 49% to 62% in the 7 catchments during the highest intensity event. The proportion of event water in stormflow was greater than could be accounted for by direct precipitation onto saturated areas. DOC concentrations in stormflow were strongly correlated with stream 18O composition. Bivariate mixing diagrams indicated that the

  6. Granular Superconductors and Gravity

    Science.gov (United States)

    Noever, David; Koczor, Ron

    1999-01-01

    As a Bose condensate, superconductors provide novel conditions for revisiting previously proposed couplings between electromagnetism and gravity. Strong variations in Cooper pair density, large conductivity and low magnetic permeability define superconductive and degenerate condensates without the traditional density limits imposed by the Fermi energy (approx. 10(exp -6) g cu cm). Recent experiments have reported anomalous weight loss for a test mass suspended above a rotating Type II, YBCO superconductor, with a relatively high percentage change (0.05-2.1%) independent of the test mass' chemical composition and diamagnetic properties. A variation of 5 parts per 104 was reported above a stationary (non-rotating) superconductor. In experiments using a sensitive gravimeter, bulk YBCO superconductors were stably levitated in a DC magnetic field and exposed without levitation to low-field strength AC magnetic fields. Changes in observed gravity signals were measured to be less than 2 parts in 108 of the normal gravitational acceleration. Given the high sensitivity of the test, future work will examine variants on the basic magnetic behavior of granular superconductors, with particular focus on quantifying their proposed importance to gravity.

  7. Simulations of Granular Media

    Science.gov (United States)

    Herrmann, H. J.; Müller, M.

    For the last ten years there has been an enormous progress in the simulation of granular media like sand or powders. These simulations consist in simulating trajectories of each particle individually. Essentially one has to solve the Newton's equations including the effects of Coulomb friction and the physics occuring at a collision. But the details of the trajectories are not important for the collective behaviour. Therefore simplifications are introduced on the smallest scales. I will introduce various methods like molecular dynamics that are used to simulate large amounts of particles (over 109). Some of these medhods are based on the exploitation of parallelisation and metacomputing. Other approaches are more stochastic (DSMC Direct Simulation Monte Carlo) which simplify the calculation of collisions, positions and collision times. Very successful has been also the use of cellular automata which have been able to predict details such as the logarithmic tale of sand heaps. I will also discuss numerical techniques used for the surrounding fluid. This can be water in the case of sedimentation or air when one studies the formation of dunes in the desert. The calculation of velocity and pressure field of the fluid are done using multigrid techniques on parallel computers. We will compare the performance of the various techniques and show some benchmarks on the dependence on the size of the system, the density of particles and the number of processors used.

  8. Rapid and selective detection of experimental snake envenomation - Use of gold nanoparticle based lateral flow assay.

    Science.gov (United States)

    Pawade, Balasaheb S; Salvi, Nitin C; Shaikh, Innus K; Waghmare, Arun B; Jadhav, Nitin D; Wagh, Vishal B; Pawade, Abhilasha S; Waykar, Indrasen G; Potnis-Lele, Mugdha

    2016-09-01

    In this study, we have developed a gold nanoparticle based simple, rapid lateral flow assay (LFA) for detection of Indian Cobra venom (CV) and Russell's viper venom (RV). Presently, there is no rapid, reliable, and field diagnostic test available in India, where snake bite cases are rampant. Therefore, this test has an immense potential from the public health point of view. The test is based on the principle of the paper immunochromatography assay for detection of two snake venom species using polyvalent antisnake venom antibodies (ASVA) raised in equines and species-specific antibodies (SSAbs) against venoms raised in rabbits for conjugation and impregnation respectively. The developed, snake envenomation detection immunoassay (SEDIA) was rapid, selective, and sensitive to detect venom concentrations up to 0.1 ng/ml. The functionality of SEDIA strips was confirmed by experimental envenomation in mice and the results obtained were specific for the corresponding venom. The SEDIA has a potential to be a field diagnostic test to detect snake envenomation and assist in saving lives of snakebite victims.

  9. Bed Evolution under Rapidly Varying Flows by a New Method for Wave Speed Estimation

    Directory of Open Access Journals (Sweden)

    Khawar Rehman

    2016-05-01

    Full Text Available This paper proposes a sediment-transport model based on coupled Saint-Venant and Exner equations. A finite volume method of Godunov type with predictor-corrector steps is used to solve a set of coupled equations. An efficient combination of approximate Riemann solvers is proposed to compute fluxes associated with sediment-laden flow. In addition, a new method is proposed for computing the water depth and velocity values along the shear wave. This method ensures smooth solutions, even for flows with high discontinuities, and on domains with highly distorted grids. The numerical model is tested for channel aggradation on a sloping bottom, dam-break cases at flume-scale and reach-scale with flat bottom configurations and varying downstream water depths. The proposed model is tested for predicting the position of hydraulic jump, wave front propagation, and for predicting magnitude of bed erosion. The comparison between results based on the proposed scheme and analytical, experimental, and published numerical results shows good agreement. Sensitivity analysis shows that the model is computationally efficient and virtually independent of mesh refinement.

  10. The Use of Surveillance Cameras for the Rapid Mapping of Lava Flows: An Application to Mount Etna Volcano

    Directory of Open Access Journals (Sweden)

    Mauro Coltelli

    2017-02-01

    Full Text Available In order to improve the observation capability in one of the most active volcanic areas in the world, Mt. Etna, we developed a processing method to use the surveillance cameras for a quasi real-time mapping of syn-eruptive processes. Following an evaluation of the current performance of the Etna permanent ground NEtwork of Thermal and Visible Sensors (Etna_NETVIS, its possible implementation and optimization was investigated to determine the locations of additional observation sites to be rapidly set up during emergencies. A tool was then devised to process time series of ground-acquired images and extract a coherent multi-temporal dataset of georeferenced map. The processed datasets can be used to extract 2D features such as evolution maps of active lava flows. The tool was validated on ad-hoc test fields and then adopted to map the evolution of two recent lava flows. The achievable accuracy (about three times the original pixel size and the short processing time makes the tool suitable for rapidly assessing lava flow evolutions, especially in the case of recurrent eruptions, such as those of the 2011–2015 Etna activity. The tool can be used both in standard monitoring activities and during emergency phases (eventually improving the present network with additional mobile stations when it is mandatory to carry out a quasi-real-time mapping to support civil protection actions. The developed tool could be integrated in the control room of the Osservatorio Etneo, thus enabling the Etna_NETVIS for mapping purposes and not only for video surveillance.

  11. Dynamical compressibility of dense granular shear flows

    OpenAIRE

    Trulsson, Martin; Bouzid, Mehdi; Claudin, Philippe; Andreotti, Bruno

    2012-01-01

    It has been conjectured by Bagnold [1] that an assembly of hard non-deformable spheres could behave as a compressible medium when slowly sheared, as the average density of such a system effectively depends on the confining pressure. Here we use discrete element simulations to show the existence of transverse and sagittal waves associated to this dynamical compressibility. For this purpose, we study the resonance of these waves in a linear Couette cell and compare the results with those predic...

  12. Rapid and sensitive lateral flow immunoassay method for determining alpha fetoprotein in serum using europium (III) chelate microparticles-based lateral flow test strips

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Rong-Liang; Xu, Xu-Ping; Liu, Tian-Cai; Zhou, Jian-Wei; Wang, Xian-Guo; Ren, Zhi-Qi [Institute of Antibody Engineering, School of Biotechnology, Southern Medical University, Guangzhou 510515, Guangdong (China); Hao, Fen [DaAn Gene Co. Ltd. of Sun Yat-sen University, 19 Xiangshan Road, Guangzhou 510515 (China); Wu, Ying-Song, E-mail: wg@smu.edu.cn [Institute of Antibody Engineering, School of Biotechnology, Southern Medical University, Guangzhou 510515, Guangdong (China)

    2015-09-03

    Alpha-fetoprotein (AFP), a primary marker for many diseases including various cancers, is important in clinical tumor diagnosis and antenatal screening. Most immunoassays provide high sensitivity and accuracy for determining AFP, but they are expensive, often complex, time-consuming procedures. A simple and rapid point-of-care system that integrates Eu (III) chelate microparticles with lateral flow immunoassay (LFIA) has been developed to determine AFP in serum with an assay time of 15 min. The approach is based on a sandwich immunoassay performed on lateral flow test strips. A fluorescence strip reader was used to measure the fluorescence peak heights of the test line (H{sub T}) and the control line (H{sub C}); the H{sub T}/H{sub C} ratio was used for quantitation. The Eu (III) chelate microparticles-based LFIA assay exhibited a wide linear range (1.0–1000 IU mL{sup −1}) for AFP with a low limit of detection (0.1 IU mL{sup −1}) based on 5ul of serum. Satisfactory specificity and accuracy were demonstrated and the intra- and inter-assay coefficients of variation (CV) for AFP were both <10%. Furthermore, in the analysis of human serum samples, excellent correlation (n = 284, r = 0.9860, p < 0.0001) was obtained between the proposed method and a commercially available CLIA kit. Results indicated that the Eu (III) chelate microparticles-based LFIA system provided a rapid, sensitive and reliable method for determining AFP in serum, indicating that it would be suitable for development in point-of-care testing. - Highlights: • Europium (III) chelate microparticles was used as a label for LIFA. • Quantitative detection by using H{sub T}/H{sub C} ratio was achieved. • LIFA for simple and rapid AFP detection in human serum. • The sensitivity and linearity was more excellent compared with QD-based ICTS. • This method could be developed for rapid point-of-care screening.

  13. Rapid detection of Bacillus anthracis spores using a super-paramagnetic lateral-flow immunological detection system.

    Science.gov (United States)

    Wang, Dian-Bing; Tian, Bo; Zhang, Zhi-Ping; Deng, Jiao-Yu; Cui, Zong-Qiang; Yang, Rui-Fu; Wang, Xu-Ying; Wei, Hong-Ping; Zhang, Xian-En

    2013-04-15

    There is an urgent need for convenient, sensitive, and specific methods to detect the spores of Bacillus anthracis, the causative agent of anthrax, because of the bioterrorism threat posed by this bacterium. In this study, we firstly develop a super-paramagnetic lateral-flow immunological detection system for B. anthracis spores. This system involves the use of a portable magnetic assay reader, super-paramagnetic iron oxide particles, lateral-flow strips and two different monoclonal antibodies directed against B. anthracis spores. This detection system specifically recognises as few as 400 pure B. anthracis spores in 30 min. This system has a linear range of 4×10³-10⁶ CFU ml⁻¹ and reproducible detection limits of 200 spores mg⁻¹ milk powder and 130 spores mg⁻¹ soil for simulated samples. In addition, this approach shows no obvious cross-reaction with other related Bacillus spores, even at high concentrations, and has no significant dependence on the duration of the storage of the immunological strips. Therefore, this super-paramagnetic lateral-flow immunological detection system is a promising tool for the rapid and sensitive detection of Bacillus anthracis spores under field conditions.

  14. Engineering of Ground for Liquefaction Mitigation Using Granular Columnar Inclusions: Recent Developments

    Directory of Open Access Journals (Sweden)

    A. M. Krishna

    2009-01-01

    Full Text Available Problem statement: Liquefaction was the most hazardous damage during an earthquake. Ground improvement techniques were employed to mitigate liquefaction hazards. Most common methods to improve engineering properties of soils are densification, reinforcement, grouting/mixing and drainage. Among various remedial measures available, installation of columnar granular inclusions is the most widely adopted method for liquefaction mitigation. Approach: Columnar granular inclusions function as drains and permit rapid dissipation of earthquake induced pore pressures by virtue of their high permeability. Results: One of the chief benefits of ground treatment with granular piles is the densification of in situ ground by which the in-situ properties of the ground get modified to mitigate liquefaction potential. Further, the very high deformation modulus and stiffness of the granular pile material provide reinforcement for the in situ soil and offer another mechanism to mitigate liquefaction. The study described briefly the phenomenon of liquefaction and the associated features. A short discussion on various ground improvement methods available for liquefaction mitigation was presented highlighting the importance of columnar inclusions. Construction methods of different granular columnar inclusions like sand compaction piles/ granular piles were discussed briefly. Recent developments in the research of columnar granular inclusions as liquefaction counter measures were presented in relation to physical, numerical and analytical model studies. Conclusion/Recommendations: Columnar granular inclusions were demonstrated to be very effective for liquefaction mitigation in different case studies and research investigations.

  15. Quantifying representative elementary volume of connectivity for translucent granular materials by light transmission micro-tomography

    Science.gov (United States)

    Wu, Ming; Cheng, Zhou; Wu, Jianfeng; Wu, Jichun

    2017-02-01

    Aquifers composed of granular materials are major repositories of groundwater resource in which water can flow freely and be stored abundantly. Undoubtedly, exploring connectivity of granular materials is essential to understand the mechanism of water and contaminant migration in subsurface environment, while characterizing the connectivity remains a difficult task currently. This study proposes a new light transmission micro-tomography (LTM) with high resolution to address this problem. The new approach relies on scanning micro-structure by light transmission through translucent granular materials in given thickness. An experiment of light transmission through a two dimensional (2D) sandbox packed by heterogeneous translucent silica is conducted to examine the efficiency of LTM in capturing all the features of connectivity including porosity (n), density (ρ), solid phase-pores interface area (Asp), and tortuosity (τ). Considering the importance of representative elementary volume (REV) in characterizing the representativeness and reliability of connectivity, associated REV scales of characteristic variables are also estimated using a criterion of relative gradient error (εgi). Results suggest that the frequencies of minimum REV sizes of connectivity are close to Gaussian distribution in 0.0-12.0 mm and the REV size of approximately 10.0 mm is available to represent connectivity of translucent silica. Then the quantification of connectivity and the corresponding REV estimates are significant for accurate simulation of fluid migration and for associated optimal design of contaminant remediation in subsurface environment. More important, this study provides the possibility of rapid, handy and economical on-site measurements of connectivity for translucent materials.

  16. Granular mixtures modeled as elastic hard spheres subject to a drag force.

    Science.gov (United States)

    Vega Reyes, Francisco; Garzó, Vicente; Santos, Andrés

    2007-06-01

    Granular gaseous mixtures under rapid flow conditions are usually modeled as a multicomponent system of smooth inelastic hard disks (two dimensions) or spheres (three dimensions) with constant coefficients of normal restitution alpha{ij}. In the low density regime an adequate framework is provided by the set of coupled inelastic Boltzmann equations. Due to the intricacy of the inelastic Boltzmann collision operator, in this paper we propose a simpler model of elastic hard disks or spheres subject to the action of an effective drag force, which mimics the effect of dissipation present in the original granular gas. For each collision term ij, the model has two parameters: a dimensionless factor beta{ij} modifying the collision rate of the elastic hard spheres, and the drag coefficient zeta{ij}. Both parameters are determined by requiring that the model reproduces the collisional transfers of momentum and energy of the true inelastic Boltzmann operator, yielding beta{ij}=(1+alpha{ij})2 and zeta{ij} proportional, variant1-alpha{ij}/{2}, where the proportionality constant is a function of the partial densities, velocities, and temperatures of species i and j. The Navier-Stokes transport coefficients for a binary mixture are obtained from the model by application of the Chapman-Enskog method. The three coefficients associated with the mass flux are the same as those obtained from the inelastic Boltzmann equation, while the remaining four transport coefficients show a general good agreement, especially in the case of the thermal conductivity. The discrepancies between both descriptions are seen to be similar to those found for monocomponent gases. Finally, the approximate decomposition of the inelastic Boltzmann collision operator is exploited to construct a model kinetic equation for granular mixtures as a direct extension of a known kinetic model for elastic collisions.

  17. Silo Collapse under Granular Discharge

    Science.gov (United States)

    Gutiérrez, G.; Colonnello, C.; Boltenhagen, P.; Darias, J. R.; Peralta-Fabi, R.; Brau, F.; Clément, E.

    2015-01-01

    We investigate, at a laboratory scale, the collapse of cylindrical shells of radius R and thickness t induced by a granular discharge. We measure the critical filling height for which the structure fails upon discharge. We observe that the silos sustain filling heights significantly above an estimation obtained by coupling standard shell-buckling and granular stress distribution theories. Two effects contribute to stabilize the structure: (i) below the critical filling height, a dynamical stabilization due to granular wall friction prevents the localized shell-buckling modes to grow irreversibly; (ii) above the critical filling height, collapse occurs before the downward sliding motion of the whole granular column sets in, such that only a partial friction mobilization is at play. However, we notice also that the critical filling height is reduced as the grain size d increases. The importance of grain size contribution is controlled by the ratio d /√{R t }. We rationalize these antagonist effects with a novel fluid-structure theory both accounting for the actual status of granular friction at the wall and the inherent shell imperfections mediated by the grains. This theory yields new scaling predictions which are compared with the experimental results.

  18. Investigations of non-hydrostatic, stably stratified and rapidly rotating flows

    CERN Document Server

    Nieves, David; Juilen, Keith; Weiss, Jeffrey B

    2016-01-01

    We present an investigation of rapidly rotating (small Rossby number $Ro\\ll 1$) and stratified turbulence where the stratification strength is varied from weak (large Froude number $Fr\\gg1$) to strong ($Fr\\ll1$). The investigation is set in the context of a reduced model derived from the Boussinesq equations that efficiently retains anisotropic inertia-gravity waves with order-one frequencies and highlights a regime of wave-eddy interactions. Numerical simulations of the reduced model are performed where energy is injected by a stochastic forcing of vertical velocity, which forces wave modes only. The simulations reveal two regimes characterized by the presence of well-formed, persistent and thin turbulent layers of locally-weakened stratification at small Froude numbers, and by the absence of layers at large Froude numbers. Both regimes are characterized by a large-scale barotropic dipole enclosed by small-scale turbulence. When the Reynolds number is not too large a direct cascade of barotropic kinetic ener...

  19. A novel framework for fluid/structure interaction in rapid subject specific simulations of blood flow in coronary artery bifurcations

    Directory of Open Access Journals (Sweden)

    Blagojević Milan

    2014-01-01

    Full Text Available Background/Aim. Practical difficulties, particularly long model development time, have limited the types and applicability of computational fluid dynamics simulations in numerical modeling of blood flow in serial manner. In these simulations, the most revealing flow parameters are the endothelial shear stress distribution and oscillatory shear index. The aim of this study was analyze their role in the diagnosis of the occurrence and prognosis of plaque development in coronary artery bifurcations. Methods. We developed a novel modeling technique for rapid cardiovascular hemodynamic simulations taking into account interactions between fluid domain (blood and solid domain (artery wall. Two numerical models that represent the observed subdomains of an arbitrary patient-specific coronary artery bifurcation were created using multi-slice computed tomography (MSCT coronagraphy and ultrasound measurements of blood velocity. Coronary flow using an in-house finite element solver PAK-FS was solved. Results. Overall behavior of coronary artery bifurcation during one cardiac cycle is described by: velocity, pressure, endothelial shear stress, oscillatory shear index, stress in arterial wall and nodal displacements. The places where (a endothelial shear stress is less than 1.5, and (b oscillatory shear index is very small (close or equal to 0 are prone to plaque genesis. Conclusion. Finite element simulation of fluid-structure interaction was used to investigate patient-specific flow dynamics and wall mechanics at coronary artery bifurcations. Simulation model revealed that lateral walls of the main branch and lateral walls distal to the carina are exposed to low endothelial shear stress which is a predilection site for development of atherosclerosis. This conclusion is confirmed by the low values of oscillatory shear index in those places.

  20. The physics of debris flows

    Science.gov (United States)

    Iverson, R.M.

    1997-01-01

    Recent advances in theory and experimentation motivate a thorough reassessment of the physics of debris flows. Analyses of flows of dry, granular solids and solid-fluid mixtures provide a foundation for a comprehensive debris flow theory, and experiments provide data that reveal the strengths and limitations of theoretical models. Both debris flow materials and dry granular materials can sustain shear stresses while remaining static; both can deform in a slow, tranquil mode characterized by enduring, frictional grain contacts; and both can flow in a more rapid, agitated mode characterized by brief, inelastic grain collisions. In debris flows, however, pore fluid that is highly viscous and nearly incompressible, composed of water with suspended silt and clay, can strongly mediate intergranular friction and collisions. Grain friction, grain collisions, and viscous fluid flow may transfer significant momentum simultaneously. Both the vibrational kinetic energy of solid grains (measured by a quantity termed the granular temperature) and the pressure of the intervening pore fluid facilitate motion of grains past one another, thereby enhancing debris flow mobility. Granular temperature arises from conversion of flow translational energy to grain vibrational energy, a process that depends on shear rates, grain properties, boundary conditions, and the ambient fluid viscosity and pressure. Pore fluid pressures that exceed static equilibrium pressures result from local or global debris contraction. Like larger, natural debris flows, experimental debris flows of ???10 m3 of poorly sorted, water-saturated sediment invariably move as an unsteady surge or series of surges. Measurements at the base of experimental flows show that coarse-grained surge fronts have little or no pore fluid pressure. In contrast, finer-grained, thoroughly saturated debris behind surge fronts is nearly liquefied by high pore pressure, which persists owing to the great compressibility and moderate

  1. Simple and rapid hydrogenation of p-nitrophenol with aqueous formic acid in catalytic flow reactors

    Directory of Open Access Journals (Sweden)

    Rahat Javaid

    2013-06-01

    Full Text Available The inner surface of a metallic tube (i.d. 0.5 mm was coated with a palladium (Pd-based thin metallic layer by flow electroless plating. Simultaneous plating of Pd and silver (Ag from their electroless-plating solution produced a mixed distributed bimetallic layer. Preferential acid leaching of Ag from the Pd–Ag layer produced a porous Pd surface. Hydrogenation of p-nitrophenol was examined in the presence of formic acid simply by passing the reaction solution through the catalytic tubular reactors. p-Aminophenol was the sole product of hydrogenation. No side reaction occurred. Reaction conversion with respect to p-nitrophenol was dependent on the catalyst layer type, the temperature, pH, amount of formic acid, and the residence time. A porous and oxidized Pd (PdO surface gave the best reaction conversion among the catalytic reactors examined. p-Nitrophenol was converted quantitatively to p-aminophenol within 15 s of residence time in the porous PdO reactor at 40 °C. Evolution of carbon dioxide (CO2 was observed during the reaction, although hydrogen (H2 was not found in the gas phase. Dehydrogenation of formic acid did not occur to any practical degree in the absence of p-nitrophenol. Consequently, the nitro group was reduced via hydrogen transfer from formic acid to p-nitrophenol and not by hydrogen generated by dehydrogenation of formic acid.

  2. Development of a Lateral Flow Immunoassay for the Rapid Diagnosis of Invasive Candidiasis

    Science.gov (United States)

    He, Zheng-Xin; Shi, Lan-Chun; Ran, Xiang-Yang; Li, Wei; Wang, Xian-Ling; Wang, Fu-Kun

    2016-01-01

    Early and accurate diagnosis of invasive candidiasis (IC) is very important. In this study, a lateral flow immunoassay (LFIA) was developed to detect antibody against Candida albicans enolase (Eno). Colloidal gold particle labeled mouse anti human IgG (1.0 mg/L) was used as the detector reagent. Recombinant enolase (rEno, 1.0 mg/L) and goat anti IgG (1.0 mg/L) were immobilized in test and control lines, respectively, of a nitrocellulose membrane, acting as the capture reagents. The LFIA was used to detect anti Eno in 38 sera from clinically proven IC patients, as well as in 50 healthy control subjects. Compared with an indirect ELISA designed as a reference test, the specificity and sensitivity of the LFIA were 98.2 and 84.8%, respectively. Excellent agreement between the results obtained by ELISA and the LFIA (κ = 0.851) was observed in this study. In addition, the agreement between the blood culture results and LFIA test is strong (κ = 0.658). The data presented in the study indicate that the LFIA test is a suitable tool for the serological surveillance of IC in the field or in poorly equipped laboratories. PMID:27679622

  3. Rapid identification of a narcotic plant Papaver bracteatum using flow cytometry.

    Science.gov (United States)

    Aragane, Masako; Watanabe, Daisuke; Nakajima, Jun'ichi; Yoshida, Masao; Yoshizawa, Masao; Abe, Tomohiro; Nishiyama, Rei; Suzuki, Jin; Moriyasu, Takako; Nakae, Dai; Sudo, Hiroshi; Sato, Hiroyuki; Hishida, Atuyuki; Kawahara, Nobuo; Makabe, So; Nakamura, Ikuo; Mii, Masahiro

    2014-10-01

    In May 2011, numerous poppy plants closely resembling Papaver bracteatum Lindl., a type of narcotic plant that is illegal in Japan, were distributed directly from several large flower shops or through online shopping throughout Japan, including the Tokyo Metropolitan area. In order to better identify the narcotic plants, the relative nuclear DNA content at the vegetative stage was measured by flow cytometric (FCM) analysis in 3 closely-related species of the genus Papaver section Oxytona, namely P. orientale, P. pseudo-orientale, and P. bracteatum, based on the difference between the chromosome numbers of these species. The results showed that the nuclear DNA content differed between these 3 species, and that most of the commercially distributed plants examined in this study could be identified as P. bracteatum. The remaining plants were P. pseudo-orientale, a non-narcotic plant. In addition, the FCM results for the identification of P. bracteatum completely agreed with the results obtained by the morphological analysis, the inter-genic spacer sequence of rpl16-rpl14 (PS-ID sequence) of chloroplast DNA, and the presence of thebaine. These results clearly indicate the usefulness of FCM analysis for the identification of P. bracteatum plants, including when they are in their vegetative stage.

  4. Actinobacillus pleuropneumoniae cytotoxins on size, granularity and viability of porcine neutrophils

    Directory of Open Access Journals (Sweden)

    Simson Tarigan

    1998-10-01

    Full Text Available Cytotoxins produced by Actinobacillus pleuropneumoniae are supposed to play major roles in bacterial pathogenicity and virulence. To gain better understanding in the mechanism of the pathogenicity, cytotoxic activities of the toxins on porcine neutrophils were investigated in vitro. Changes in cell size, granularity and viability were examined with a flow cytometer. Cell size and granularity correlate with forward light scatter and right angle light scatter, respectively; whereas, cell viability corresponds with fluorescent intensity of cells stained with propidium iodide . At low concentrations (dilutions between 1/10 and 1/100 of bacterial culture supernatants, the cytotoxins induced severe swelling and degranulation of neutrophils; whereas, at higher concentrations (dilutions of 51/10 bacterial culture supernatants, the cytotoxins caused rapid cell death. There was no significant difference in cytotoxic activities of Cyooxins derived from various serotypes (serotypes 1, 2, 3, 5 and 7 of A. pleuropneumoniae . Morphologically, the cytotoxin-treated neutrophils stained with Giemsa showed profound changes. Neutrophils treated with low dosages of Cyooxins became swollen with spherical nuclei . Higher concentration of cytotoxins study indicates strongly that important mechanism in the caused vactiolation of cytoplasts, enlargement or disintegration of nuclei . This in vitro intoxication of neutrophils by cytotoxins produced by A. pleuropneumoniae comprises anpathogenicity of the bacteria.

  5. Establishment and Application of Early Warning System for Flood and Debris Flow Triggered by Rapid Erosion of Natural Barrier

    Science.gov (United States)

    Kaji, A.; Mizuno, H.; Yamakoshi, T.; Ishizuka, T.

    2012-04-01

    A large amount of mass of land from a mountain slides into a gorge and a river, depositing on the bed. The formation of such natural barrier provides a dam called "a natural dam", allowing water to accumulate in the upstream. People living in the downstream of basin are at risk of flood triggered by the dam break. Recently, many people have been at such risk emerged by earthquakes and heavy rainfall therefore they have been requesting to establish an early warning system for such flood risk. By analyzing the past case of the formations and the natural dam breaks in Japan, it was found that the surface flow on the natural dam eroded the deposition rapidly and the accumulated water and the deposition started to flow downstream in many cases. So that an alert should be issued by forecasting when the accumulated water in the upstream starts to flow on the deposition. In order to forecast the timing, we have to take into consideration of the difference between the water volume of flowing to the lake from the upstream basin and that of seeping into the deposition. Our final target is to develop a method for estimating the two previous quantities. In the first step, we report the result of analysis of the past cases in Japan. We focused on the two natural dams in the Yuhama village in Miyagi prefecture and in the Nagatono village in Nara prefecture. The natural dam in Yuhama village was formed by a deep-seated landslide triggered by the earthquake in 2008, and the natural dam in Nagatono was formed by a deep-seated landslide triggered by heavy rainfall in 2011. In the Yuhama case, the water level of the accumulated water had been rising until it reached to the top of the natural dam. In the Nagatono case, the water level had been rising during rainfall, however the water level had been dropping after the rainfall. The difference between the water volume of flowing in and that of flowing out from the natural dam caused the tendencies. We are going to analyze the soil

  6. Validation of DEM prediction for granular avalanches on irregular terrain

    Science.gov (United States)

    Mead, Stuart R.; Cleary, Paul W.

    2015-09-01

    Accurate numerical simulation can provide crucial information useful for a greater understanding of destructive granular mass movements such as rock avalanches, landslides, and pyroclastic flows. It enables more informed and relatively low cost investigation of significant risk factors, mitigation strategy effectiveness, and sensitivity to initial conditions, material, or soil properties. In this paper, a granular avalanche experiment from the literature is reanalyzed and used as a basis to assess the accuracy of discrete element method (DEM) predictions of avalanche flow. Discrete granular approaches such as DEM simulate the motion and collisions of individual particles and are useful for identifying and investigating the controlling processes within an avalanche. Using a superquadric shape representation, DEM simulations were found to accurately reproduce transient and static features of the avalanche. The effect of material properties on the shape of the avalanche deposit was investigated. The simulated avalanche deposits were found to be sensitive to particle shape and friction, with the particle shape causing the sensitivity to friction to vary. The importance of particle shape, coupled with effect on the sensitivity to friction, highlights the importance of quantifying and including particle shape effects in numerical modeling of granular avalanches.

  7. Martian gullies: possible formation mechanism by dry granular material..

    Science.gov (United States)

    Cedillo-Flores, Y.; Durand-Manterola, H. J.

    section Some of the geomorphological features in Mars are the gullies Some theories developed tried explain its origin either by liquid water liquid carbon dioxide or flows of dry granular material We made a comparative analysis of the Martian gullies with the terrestrial ones We propose that the mechanism of formation of the gullies is as follows In winter CO 2 snow mixed with sand falls in the terrain In spring the CO 2 snow sublimate and gaseous CO 2 make fluid the sand which flows like liquid eroding the terrain and forming the gullies By experimental work with dry granular material we simulated the development of the Martian gullies injecting air in the granular material section We present the characteristics of some terrestrial gullies forms at cold environment sited at Nevado de Toluca Volcano near Toluca City M e xico We compare them with Martian gullies choose from four different areas to target goal recognize or to distinguish to identify possible processes evolved in its formation Also we measured the lengths of those Martian gullies and the range was from 24 m to 1775 meters Finally we present results of our experimental work at laboratory with dry granular material

  8. Effect of volume fraction on granular avalanche dynamics.

    Science.gov (United States)

    Gravish, Nick; Goldman, Daniel I

    2014-09-01

    We study the evolution and failure of a granular slope as a function of prepared volume fraction, ϕ(0). We rotated an initially horizontal layer of granular material (0.3-mm-diam glass spheres) to a 45° angle while we monitor the motion of grains from the side and top with high-speed video cameras. The dynamics of grain motion during the tilt process depended sensitively on ϕ(0)∈[0.58-0.63] and differed above or below the granular critical state, ϕ(c), defined as the onset of dilation as a function of increasing volume fraction. For ϕ(0)-ϕ(c)avalanche. Precursor compaction events began at an initial angle θ(0)=7.7±1.4° and occurred intermittently prior to the onset of an avalanche. Avalanches occurred at the maximal slope angle θ(m)=28.5±1.0°. Granular material at ϕ(0)-ϕ(c)>0 did not experience precursor compaction prior to avalanche flow, and instead experienced a single dilational motion at θ(0)=32.1±1.5° prior to the onset of an avalanche at θ(m)=35.9±0.7°. Both θ(0) and θ(m) increased with ϕ(0) and approached the same value in the limit of random close packing. The angle at which avalanching grains came to rest, θ(R)=22±2°, was independent of ϕ(0). From side-view high-speed video, we measured the velocity field of intermittent and avalanching flow. We found that flow direction, depth, and duration were affected by ϕ(0), with ϕ(0)-ϕ(c)0. Our study elucidates how initial conditions-including volume fraction-are important determinants of granular slope stability and the onset of avalanches.

  9. Cerebral O2 metabolism and cerebral blood flow in humans during deep and rapid-eye-movement sleep

    DEFF Research Database (Denmark)

    Madsen, P L; Schmidt, J F; Wildschiødtz, Gordon

    1991-01-01

    It could be expected that the various stages of sleep were reflected in variation of the overall level of cerebral activity and thereby in the magnitude of cerebral metabolic rate of oxygen (CMRO2) and cerebral blood flow (CBF). The elusive nature of sleep imposes major methodological restrictions...... on examination of this question. We have now measured CBF and CMRO2 in young healthy volunteers using the Kety-Schmidt technique with 133Xe as the inert gas. Measurements were performed during wakefulness, deep sleep (stage 3/4), and rapid-eye-movement (REM) sleep as verified by standard polysomnography...... associated with light anesthesia. During REM sleep (dream sleep) CMRO2 was practically the same as in the awake state. Changes in CBF paralleled changes in CMRO2 during both deep and REM sleep....

  10. Inherent Segregation in Granular Media

    Directory of Open Access Journals (Sweden)

    Sánchez-Guzmán J.

    2011-10-01

    Full Text Available A study of the inherent segregation within granular media due to the relative size of the different particles is presented. A numerical model is used to simulate granular structures. For both simulation and granular structures evaluations, probability theory is widely used. Particles are idealized by disks (2D model and spheres (3D model. Strictly uniform grain size materials, bimodal (two particle sizes and continuous are simulated. Two variables representing segregation and allowing appreciating the grain-size parameters effects are considered. In uniform materials, the presence of spontaneous structuring is observed. In bimodal and continuous materials, inherent segregation mainly depends on the ratio between maximum and minimum diameters of particle. Some practical implications of inherent segregation in geotechnical problems and other disciplines are remarked.

  11. Instability in Shocked Granular Gases

    CERN Document Server

    Sirmas, Nick; Radulescu, Matei

    2013-01-01

    Shocks in granular media, such as vertically oscillated beds, have been shown to develop instabilities. Similar jet formation has been observed in explosively dispersed granular media. Our previous work addressed this instability by performing discrete-particle simulations of inelastic media undergoing shock compression. By allowing finite dissipation within the shock wave, instability manifests itself as distinctive high density non-uniformities and convective rolls within the shock structure. In the present study we have extended this work to investigate this instability at the continuum level. We modeled the Euler equations for granular gases with a modified cooling rate to include an impact velocity threshold necessary for inelastic collisions. Our results showed a fair agreement between the continuum and discrete-particle models. Discrepancies, such as higher frequency instabilities in our continuum results may be attributed to the absence of higher order effects.

  12. Instability in shocked granular gases

    Science.gov (United States)

    Sirmas, Nick; Falle, Sam; Radulescu, Matei

    2014-05-01

    Shocks in granular media, such as vertically oscillated beds, have been shown to develop instabilities. Similar jet formation has been observed in explosively dispersed granular media. Our previous work addressed this instability by performing discrete-particle simulations of inelastic media undergoing shock compression. By allowing finite dissipation within the shock wave, instability manifests itself as distinctive high density non-uniformities and convective rolls within the shock structure. In the present study we have extended this work to investigate this instability at the continuum level. We modeled the Euler equations for granular gases with a modified cooling rate to include an impact velocity threshold necessary for inelastic collisions. Our results showed a fair agreement between the continuum and discrete-particle models. Discrepancies, such as higher frequency instabilities in our continuum results may be attributed to the absence of higher order effects.

  13. Lateral-flow colloidal gold-based immunoassay for the rapid detection of deoxynivalenol with two indicator ranges

    Energy Technology Data Exchange (ETDEWEB)

    Kolosova, Anna Yu. [Laboratory of Food Analysis, Faculty of Pharmaceutical Sciences, Ghent University, Harelbekestraat 72, 9000 Ghent (Belgium)], E-mail: anna_kolosova@hotmail.com; Sibanda, Liberty [TOXI-TEST NV, Industrielaan 9a, 9990 Maldegem (Belgium); Dumoulin, Frederic [Laboratory of Food Analysis, Faculty of Pharmaceutical Sciences, Ghent University, Harelbekestraat 72, 9000 Ghent (Belgium); Lewis, Janet; Duveiller, Etienne [International Maize and Wheat Improvement Center (CIMMYT), Apdo. Postal 6-641, 06600 Mexico, D.F. (Mexico); Van Peteghem, Carlos; Saeger, Sarah de [Laboratory of Food Analysis, Faculty of Pharmaceutical Sciences, Ghent University, Harelbekestraat 72, 9000 Ghent (Belgium)

    2008-06-02

    A lateral-flow immunoassay using a colloidal gold-labelled monoclonal antibody was developed for the rapid detection of deoxynivalenol (DON). Different parameters, such as the amount of immunoreagents, type of the materials, composition of the blocking solution and of the detector reagent mixture, were investigated to provide the optimum assay performance. The experimental results demonstrated that such a visual test had an indicator range rather than a cut-off value. Thus, tests for DON determination with two different indicator ranges of 250-500 and 1000-2000 {mu}g kg{sup -1} were designed. The method allowed detection of DON at low and high concentration levels, which could be useful for research and practical purposes. The assay applied to spiked wheat and pig feed samples demonstrated accurate and reproducible results. The applicability of the developed lateral-flow test was also confirmed under real field conditions. The test strips prepared in Belgium were sent to Mexico, where they were used for the screening of DON contamination in different bread wheat entries from Fusarium Head Blight inoculated plots. The results were compared with those obtained by ELISA and LC-MS/MS. A poor correlation between ELISA and LC-MS/MS was observed. Visual results of the dipstick tests were in a good agreement with the results of the LC-MS/MS method. Coupled with a simple and fast sample preparation, this qualitative one-step test based on the visual evaluation of results did not require any equipment. Results could be obtained within 10 min. The described assay format can be used as a simple, rapid, cost-effective and robust on-site screening tool for mycotoxin contamination in different agricultural commodities.

  14. Objective rapid delineation of areas at risk from block-and-ash pyroclastic flows and surges

    Science.gov (United States)

    Widiwijayanti, C.; Voight, B.; Hidayat, D.; Schilling, S. P.

    2009-08-01

    Assessments of pyroclastic flow (PF) hazards are commonly based on mapping of PF and surge deposits and estimations of inundation limits, and/or computer models of varying degrees of sophistication. In volcanic crises a PF hazard map may be sorely needed, but limited time, exposures, or safety aspects may preclude fieldwork, and insufficient time or baseline data may be available for reliable dynamic simulations. We have developed a statistically constrained simulation model for block-and-ash type PFs to estimate potential areas of inundation by adapting methodology from Iverson et al. (Geol Soc America Bull 110:972-984, 1998) for lahars. The predictive equations for block-and-ash PFs are calibrated with data from several volcanoes and given by A = (0.05 to 0.1) V 2/3, B = (35 to 40) V 2/3, where A is cross-sectional area of inundation, B is planimetric area and V is deposit volume. The proportionality coefficients were obtained from regression analyses and comparison of simulations to mapped deposits. The method embeds the predictive equations in a GIS program coupled with DEM topography, using the LAHARZ program of Schilling (1998). Although the method is objective and reproducible, any PF hazard zone so computed should be considered as an approximate guide only, due to uncertainties on the coefficients applicable to individual PFs, the authenticity of DEM details, and the volume of future collapses. The statistical uncertainty of the predictive equations, which imply a factor of two or more in predicting A or B for a specified V, is superposed on the uncertainty of forecasting V for the next PF to descend a particular valley. Multiple inundation zones, produced by simulations using a selected range of volumes, partly accommodate these uncertainties. The resulting maps show graphically that PF inundation potentials are highest nearest volcano sources and along valley thalwegs, and diminish with distance from source and lateral distance from thalweg. The model

  15. Objective rapid delineation of areas at risk from block-and-ash pyroclastic flows and surges

    Science.gov (United States)

    Widiwijayanti, C.; Voight, B.; Hidayat, D.; Schilling, S.P.

    2009-01-01

    Assessments of pyroclastic flow (PF) hazards are commonly based on mapping of PF and surge deposits and estimations of inundation limits, and/or computer models of varying degrees of sophistication. In volcanic crises a PF hazard map may be sorely needed, but limited time, exposures, or safety aspects may preclude fieldwork, and insufficient time or baseline data may be available for reliable dynamic simulations. We have developed a statistically constrained simulation model for block-and-ash type PFs to estimate potential areas of inundation by adapting methodology from Iverson et al. (Geol Soc America Bull 110:972-984, (1998) for lahars. The predictive equations for block-and-ash PFs are calibrated with data from several volcanoes and given by A = (0.05 to 0.1) V2/3, B = (35 to 40) V2/3, where A is cross-sectional area of inundation, B is planimetric area and V is deposit volume. The proportionality coefficients were obtained from regression analyses and comparison of simulations to mapped deposits. The method embeds the predictive equations in a GIS program coupled with DEM topography, using the LAHARZ program of Schilling (1998). Although the method is objective and reproducible, any PF hazard zone so computed should be considered as an approximate guide only, due to uncertainties on the coefficients applicable to individual PFs, the authenticity of DEM details, and the volume of future collapses. The statistical uncertainty of the predictive equations, which imply a factor of two or more in predicting A or B for a specified V, is superposed on the uncertainty of forecasting V for the next PF to descend a particular valley. Multiple inundation zones, produced by simulations using a selected range of volumes, partly accommodate these uncertainties. The resulting maps show graphically that PF inundation potentials are highest nearest volcano sources and along valley thalwegs, and diminish with distance from source and lateral distance from thalweg. The model does

  16. Rainwater Channelization and Infiltration in Granular Media

    Science.gov (United States)

    Cejas, Cesare; Wei, Yuli; Barrois, Remi; Durian, Douglas; Dreyfus, Remi; Compass Team

    2013-03-01

    We investigate the formation of fingered flow in dry granular media under simulated rainfall using a quasi-2D experimental set-up composed of a random close packing of mono-disperse glass beads. We determine effects of grain diameter and surface wetting properties on the formation and infiltration of water channels. For hydrophilic granular media, rainwater initially infiltrates a shallow top layer of soil creating a uniform horizontal wetting front before instabilities occur and grow to form water channels. For hydrophobic media, rainwater ponds on the soil surface rather than infiltrates and water channels may still occur at a later time when the hydraulic pressure of the ponding water exceeds the capillary repellency of the soil. We probe the kinetics of the fingering instabilities that serve as precursors for the growth and drainage of water channels. We also examine the effects of several different methods on improving rainwater channelization such as varying the level of pre-saturation, modifying the soil surface flatness, and adding superabsorbent hydrogel particles.

  17. A rapid lateral flow immunoassay for the detection of tyrosine phosphatase-like protein IA-2 autoantibodies in human serum.

    Directory of Open Access Journals (Sweden)

    Ingrid Kikkas

    Full Text Available Type 1 diabetes (T1D results from the destruction of pancreatic insulin-producing beta cells and is strongly associated with the presence of islet autoantibodies. Autoantibodies to tyrosine phosphatase-like protein IA-2 (IA-2As are considered to be highly predictive markers of T1D. We developed a novel lateral flow immunoassay (LFIA based on a bridging format for the rapid detection of IA-2As in human serum samples. In this assay, one site of the IA-2As is bound to HA-tagged-IA-2, which is subsequently captured on the anti-HA-Tag antibody-coated test line on the strip. The other site of the IA-2As is bound to biotinylated IA-2, allowing the complex to be visualized using colloidal gold nanoparticle-conjugated streptavidin. For this study, 35 serum samples from T1D patients and 44 control sera from non-diabetic individuals were analyzed with our novel assay and the results were correlated with two IA-2A ELISAs. Among the 35 serum samples from T1D patients, the IA-2A LFIA, the in-house IA-2A ELISA and the commercial IA-2A ELISA identified as positive 21, 29 and 30 IA-2A-positive sera, respectively. The major advantages of the IA-2A LFIA are its rapidity and simplicity.

  18. Measurement of the rapidity-even dipolar flow in Pb-Pb collisions with the ATLAS detector

    CERN Document Server

    Jia, Jiangyong

    2012-01-01

    The rapidity-even dipolar flow v1 associated with dipole asymmetry in the initial geometry is measured over a broad range in transverse momentum 0.5 GeVrapidity-even v1 and global momentum conservation. The magnitude of the extracted momentum conservation component suggests that the system conserving momentum involves only a subset of the event (spanning about 3 units in \\eta in central collisions). The extracted v1 is observed to cross zero at pT~1.0 GeV, reaches a maximum at 4-5 GeV with a value comparable to that for v...

  19. Rapid quantification of live/dead lactic acid bacteria in probiotic products using high-sensitivity flow cytometry

    Science.gov (United States)

    He, Shengbin; Hong, Xinyi; Huang, Tianxun; Zhang, Wenqiang; Zhou, Yingxing; Wu, Lina; Yan, Xiaomei

    2017-06-01

    A laboratory-built high-sensitivity flow cytometer (HSFCM) was employed for the rapid and accurate detection of lactic acid bacteria (LAB) and their viability in probiotic products. LAB were stained with both the cell membrane-permeable SYTO 9 green-fluorescent nucleic acid stain and the red-fluorescent nucleic acid stain, propidium iodide, which penetrates only bacteria with compromised membranes. The side scatter and dual-color fluorescence signals of single bacteria were detected simultaneously by the HSFCM. Ultra-high temperature processing milk and skim milk spiked with Lactobacillus casei were used as the model systems for the optimization of sample pretreatment and staining. The viable LAB counts measured by the HSFCM were in good agreement with those of the plate count method, and the measured ratios between the live and dead LAB matched well with the theoretical ratios. The established method was successfully applied to the rapid quantification of live/dead LAB in yogurts and fermented milk beverages of different brands. Moreover, the concentration and viability status of LAB in ambient yogurt, a relatively new yet popular milk product in China, are also reported.

  20. Flow Injection Analysis with Electrochemical Detection for Rapid Identification of Platinum-Based Cytostatics and Platinum Chlorides in Water

    Directory of Open Access Journals (Sweden)

    Marketa Kominkova

    2014-02-01

    Full Text Available Platinum-based cytostatics, such as cisplatin, carboplatin or oxaliplatin are widely used agents in the treatment of various types of tumors. Large amounts of these drugs are excreted through the urine of patients into wastewaters in unmetabolised forms. This phenomenon leads to increased amounts of platinum ions in the water environment. The impacts of these pollutants on the water ecosystem are not sufficiently investigated as well as their content in water sources. In order to facilitate the detection of various types of platinum, we have developed a new, rapid, screening flow injection analysis method with electrochemical detection (FIA-ED. Our method, based on monitoring of the changes in electrochemical behavior of analytes, maintained by various pH buffers (Britton-Robinson and phosphate buffer and potential changes (1,000, 1,100 and 1,200 mV offers rapid and cheap selective determination of platinum-based cytostatics and platinum chlorides, which can also be present as contaminants in water environments.