Rapid Growth of Uropathogenic Escherichia coli during Human Urinary Tract Infection

Directory of Open Access Journals (Sweden)

Valerie S. Forsyth

2018-03-01

Full Text Available Uropathogenic Escherichia coli (UPEC strains cause most uncomplicated urinary tract infections (UTIs. These strains are a subgroup of extraintestinal pathogenic E. coli (ExPEC strains that infect extraintestinal sites, including urinary tract, meninges, bloodstream, lungs, and surgical sites. Here, we hypothesize that UPEC isolates adapt to and grow more rapidly within the urinary tract than other E. coli isolates and survive in that niche. To date, there has not been a reliable method available to measure their growth rate in vivo. Here we used two methods: segregation of nonreplicating plasmid pGTR902, and peak-to-trough ratio (PTR, a sequencing-based method that enumerates bacterial chromosomal replication forks present during cell division. In the murine model of UTI, UPEC strain growth was robust in vivo, matching or exceeding in vitro growth rates and only slowing after reaching high CFU counts at 24 and 30 h postinoculation (hpi. In contrast, asymptomatic bacteriuria (ABU strains tended to maintain high growth rates in vivo at 6, 24, and 30 hpi, and population densities did not increase, suggesting that host responses or elimination limited population growth. Fecal strains displayed moderate growth rates at 6 hpi but did not survive to later times. By PTR, E. coli in urine of human patients with UTIs displayed extraordinarily rapid growth during active infection, with a mean doubling time of 22.4 min. Thus, in addition to traditional virulence determinants, including adhesins, toxins, iron acquisition, and motility, very high growth rates in vivo and resistance to the innate immune response appear to be critical phenotypes of UPEC strains.

Efficient protocol for rapid Aloe vera micropropagation.

Science.gov (United States)

Molsaghi, Mozhgan; Moieni, Ahmad; Kahrizi, Danial

2014-06-01

Aloe vera Linn. (Liliaceae) is a medicinal plant and has a number of curative properties. Vegetative propagation has not enough potential for supplying market demand. However, via in vitro propagation makes possible the mass production of Aloe plants. The current study was conducted to investigate growth regulators' effects on proliferation of A. vera. In this study, for comparison of plant growth regulators' effects on proliferation, the shoot tips and auxiliary buds of A. vera were cultured in the Murashige and Skoog (MS) medium. Rooted plantlets were transferred to garden soil, compost, and sand in the proportion of 1:1:1, respectively, after hardening. The maximum number of shoots was obtained on the medium supplemented with 1 mg/L IAA+4 mg/L BAP and 0.2 mg/L IAA+0.8 BAP mg/L. Rooting was also achieved in the same media composition proliferation of shoot. The acclimatized plants showed 100% of survival. The regenerated plants looked healthy, and they were morphologically similar to that of stock plants. These results suggest that in vitro culture may be used as a technique for rapid propagation of A. vera.

Rapid growth and childhood obesity are strongly associated with lysoPC(14:0).

Science.gov (United States)

Rzehak, Peter; Hellmuth, Christian; Uhl, Olaf; Kirchberg, Franca F; Peissner, Wolfgang; Harder, Ulrike; Grote, Veit; Weber, Martina; Xhonneux, Annick; Langhendries, Jean-Paul; Ferre, Natalia; Closa-Monasterolo, Ricardo; Verduci, Elvira; Riva, Enrica; Socha, Piotr; Gruszfeld, Dariusz; Koletzko, Berthold

2014-01-01

Despite the growing interest in the early-origins-of-later-disease hypothesis, little is known about the metabolic underpinnings linking infant weight gain and childhood obesity. To discover biomarkers reflective of weight change in the first 6 months and overweight/obesity at age 6 years via a targeted metabolomics approach. This analysis comprised 726 infants from a European multicenter randomized trial (Childhood Obesity Programme, CHOP) for whom plasma blood samples at age 6 months and anthropometric data up to the age of 6 years were available. 'Rapid growth' was defined as a positive difference in weight within the first 6 months of life standardized to WHO growth standards. Weight change was regressed on each of 168 metabolites (acylcarnitines, lysophosphatidylcholines, sphingomyelins, and amino acids). Metabolites significant after Bonferroni's correction were tested as predictors of later overweight/obesity. Among the overall 19 significant metabolites, 4 were associated with rapid growth and 15 were associated with a less-than-ideal weight change. After adjusting for feeding group, only the lysophosphatidylcholine LPCaC14:0 remained significantly associated with rapid weight gain (β = 0.18). Only LPCaC14:0 at age 6 months was predictive of overweight/obesity at age 6 years (OR 1.33; 95% CI 1.04-1.69). LPCa14:0 is strongly related to rapid growth in infancy and childhood overweight/obesity. This suggests that LPCaC14:0 levels may represent a metabolically programmed effect of infant weight gain on the later obesity risk. However, these results require confirmation by independent cohorts. © 2014 S. Karger AG, Basel.

Standard Operating Procedure (SOP) for Rapid and Efficient Production of Stevia Tissue Culture Seedlings

International Nuclear Information System (INIS)

Norazlina Noordin; Peng, C.S.; Rusli Ibrahim

2015-01-01

Stevia rebaudiana Bertoni is a non-caloric natural sweetener which is 300 times sweeter than cane sugar. Extracts from stevia leaves has vast application in food and beverages based industries, can be added to tea and coffee, cooked or baked goods, processed foods and confectionary goods. Recently, stevia attained awareness owing to its natural, non-caloric sweetness by diet/ health conscious and diabetic persons (Arpita et al., 2011). This natural sweetener has high commercial value in global market, it was estimated that global market value for stevia is be around USD11 billion by year 2015. Although stevia is being largely popularized in Malaysia and other countries but large-scale propagation procedures for the continuous supply of planting materials in commercial plantation has yet to be established, optimized and standardized. Furthermore, propagation through stevia seeds is often very difficult due to self-incompatibility which results in sterile seeds (Sakaguchi et al., 1982). Tissue culture is the only rapid process for the mass propagation of stevia and there have been few reports of in vitro growth of stevia (Miyagaya et al., 1986) and in vitro micropropagation from shoot tip and leaf (Uddin et al., 2006). Hence, study was carried out to establish a suitable protocol for in vitro propagation of S. rebaudiana Bertoni that can be further up-scaled for mass propagation of stevia seedlings. The established Standard Operating Procedure (SOP) will ensure rapid and efficient production of stevia tissue culture seedlings for continuous supply of planting materials for commercial stevia plantations in Malaysia. Preparation of growth medium, multiplication of shoots, rooting of plant lets and hardening of ex-vitro rooted plant lets is discussed in this paper. (author)

Bacterial growth laws reflect the evolutionary importance of energy efficiency.

Science.gov (United States)

Maitra, Arijit; Dill, Ken A

2015-01-13

We are interested in the balance of energy and protein synthesis in bacterial growth. How has evolution optimized this balance? We describe an analytical model that leverages extensive literature data on growth laws to infer the underlying fitness landscape and to draw inferences about what evolution has optimized in Escherichia coli. Is E. coli optimized for growth speed, energy efficiency, or some other property? Experimental data show that at its replication speed limit, E. coli produces about four mass equivalents of nonribosomal proteins for every mass equivalent of ribosomes. This ratio can be explained if the cell's fitness function is the the energy efficiency of cells under fast growth conditions, indicating a tradeoff between the high energy costs of ribosomes under fast growth and the high energy costs of turning over nonribosomal proteins under slow growth. This model gives insight into some of the complex nonlinear relationships between energy utilization and ribosomal and nonribosomal production as a function of cell growth conditions.

Rapid growth, maturity, current problems, future prospects of NAA

International Nuclear Information System (INIS)

Guinn, V.P.

2000-01-01

The early rapid growth, the attainment of maturity, current problems, and future prospects of NAA (neutron activation analysis) are discussed, each in reasonable detail. In particular, the nature and causes of its current problems are examined, and suggestions are presented for the solution of these problems. The author believes that vigorous action in suggested areas of concentration can reinvigorate the status of NAA as an important method of elemental analysis. (author)

Rapid regulation of leaf photosynthesis, carbohydrate status and leaf area expansion to maintain growth in irregular light environments

DEFF Research Database (Denmark)

Kjær, Katrine Heinsvig

2012-01-01

to maintain carbohydrate status and growth in unpredictable light environments. Our recent results show rapid regulation of photosynthesis and leaf carbohydrate status to maintain growth and light interception in dynamic light environments when campanula, rose and chrysanthemum were grown in a cost......-efficient light control system. Plant dry matter production was in all cases linear related to DLI, despite changes in daily light duration and light intensity of supplemental light suggesting that DLI is the main limiting factor for the prediction of production time in optimal temperature conditions. The results......Protected plant productions in northern latitudes rely heavily on supplemental light use to extend the number of light hours during the day. To conserve electricity and lower costs, a low-energy input system use supplemental lights preferable during less expensive off-peak hours and turn lighting...

Testing mechanistic models of growth in insects.

Science.gov (United States)

Maino, James L; Kearney, Michael R

2015-11-22

Insects are typified by their small size, large numbers, impressive reproductive output and rapid growth. However, insect growth is not simply rapid; rather, insects follow a qualitatively distinct trajectory to many other animals. Here we present a mechanistic growth model for insects and show that increasing specific assimilation during the growth phase can explain the near-exponential growth trajectory of insects. The presented model is tested against growth data on 50 insects, and compared against other mechanistic growth models. Unlike the other mechanistic models, our growth model predicts energy reserves per biomass to increase with age, which implies a higher production efficiency and energy density of biomass in later instars. These predictions are tested against data compiled from the literature whereby it is confirmed that insects increase their production efficiency (by 24 percentage points) and energy density (by 4 J mg(-1)) between hatching and the attainment of full size. The model suggests that insects achieve greater production efficiencies and enhanced growth rates by increasing specific assimilation and increasing energy reserves per biomass, which are less costly to maintain than structural biomass. Our findings illustrate how the explanatory and predictive power of mechanistic growth models comes from their grounding in underlying biological processes. © 2015 The Author(s).

The effect of mercury on the growth efficiency of Tilapia mossambica (Peters)

Digital Repository Service at National Institute of Oceanography (India)

Menezes, M.R.; Qasim, S.Z.

Three concentrations of mercury (0.01, 0.04 and 0.4 ppm) were used for experiments on growth efficiency of Tilapia mossambica. Growth efficiencies were determined on a dry weight basis. High concentration of mercury (0.4 ppm) caused considerable...

Energy efficiency, sustainability and economic growth

International Nuclear Information System (INIS)

Ayres, Robert U.; Turton, Hal; Casten, Tom

2007-01-01

This paper explores two linked theses related to the role energy in economic development, and potential sources of increased energy efficiency for continued growth with reduced greenhouse gas (GHG) emissions. The first thesis is that, while reduced GHG emissions are essential for long-term global sustainability, the usual policy recommendation of increasing energy costs by introducing a carbon tax may be relatively ineffective under current market structures and have an unnecessarily adverse impact on economic growth. Our second thesis is that there exists a practical near-term strategy for reducing GHG emissions while simultaneously encouraging continued technology-driven economic growth. Moreover, this strategy does not require radical new technologies, but rather improved regulation or-more precisely-better deregulation of the electric power sector. In respect to the first of our two theses, this paper addresses a deficiency in neoclassical economic growth theory, in which growth is assumed to be automatic, inevitable and cost-free. We challenge both the assumption that growth will continue in the future at essentially the same rate ('the trend') as it has in the past, and the corollary that our children's children will inevitably be richer and better able to afford the cost of repairing the environmental damages caused by current generations [Simon et al., The state of humanity. Cambridge MA: Blackwell Publishers Ltd.; 1995

Governing Rapid Growth in Asia: State-led Development in Historical Perspective

NARCIS (Netherlands)

T-W. Ngo (Tak-Wing)

2009-01-01

textabstractRapid growth in Asia has often been explained in terms of effective policies pursued by a “developmental state”. In particular, countries in East Asia are said to be characterized by the presence of a strong state with technocratic capacity and social embeddedness. This inaugural address

Polygenic Risk, Rapid Childhood Growth, and the Development of Obesity

Science.gov (United States)

Belsky, Daniel W.; Moffitt, Terrie E.; Houts, Renate; Bennett, Gary G.; Biddle, Andrea K.; Blumenthal, James A.; Evans, James P.; Harrington, HonaLee; Sugden, Karen; Williams, Benjamin; Poulton, Richie; Caspi, Avshalom

2012-01-01

Objective To test how genomic loci identified in genome-wide association studies influence the development of obesity. Design A 38-year prospective longitudinal study of a representative birth cohort. Setting The Dunedin Multidisciplinary Health and Development Study, Dunedin, New Zealand. Participants One thousand thirty-seven male and female study members. Main Exposures We assessed genetic risk with a multilocus genetic risk score. The genetic risk score was composed of single-nucleotide polymorphisms identified in genome-wide association studies of obesity-related phenotypes. We assessed family history from parent body mass index data collected when study members were 11 years of age. Main Outcome Measures Body mass index growth curves, developmental phenotypes of obesity, and adult obesity outcomes were defined from anthropometric assessments at birth and at 12 subsequent in-person interviews through 38 years of age. Results Individuals with higher genetic risk scores were more likely to be chronically obese in adulthood. Genetic risk first manifested as rapid growth during early childhood. Genetic risk was unrelated to birth weight. After birth, children at higher genetic risk gained weight more rapidly and reached adiposity rebound earlier and at a higher body mass index. In turn, these developmental phenotypes predicted adult obesity, mediating about half the genetic effect on adult obesity risk. Genetic associations with growth and obesity risk were independent of family history, indicating that the genetic risk score could provide novel information to clinicians. Conclusions Genetic variation linked with obesity risk operates, in part, through accelerating growth in the early childhood years after birth. Etiological research and prevention strategies should target early childhood to address the obesity epidemic. PMID:22665028

Rapid growth of single-layer graphene on the insulating substrates by thermal CVD

Energy Technology Data Exchange (ETDEWEB)

Chen, C.Y. [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Dai, D.; Chen, G.X.; Yu, J.H. [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Nishimura, K. [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Advanced Nano-processing Engineering Lab, Mechanical Systems Engineering, Kogakuin University (Japan); Lin, C.-T. [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Jiang, N., E-mail: jiangnan@nimte.ac.cn [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Zhan, Z.L., E-mail: zl_zhan@sohu.com [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China)

2015-08-15

Highlights: • A rapid thermal CVD process has been developed to directly grow graphene on the insulating substrates. • The treating time consumed is ≈25% compared to conventional CVD procedure. • Single-layer and few-layer graphene can be formed on quartz and SiO{sub 2}/Si substrates, respectively. • The formation of thinner graphene at the interface is due to the fast precipitation rate of carbon atoms during cooling. - Abstract: The advance of CVD technique to directly grow graphene on the insulating substrates is particularly significant for further device fabrication. As graphene is catalytically grown on metal foils, the degradation of the sample properties is unavoidable during transfer of graphene on the dielectric layer. Moreover, shortening the treatment time as possible, while achieving single-layer growth of graphene, is worthy to be investigated for promoting the efficiency of mass production. Here we performed a rapid heating/cooling process to grow graphene films directly on the insulating substrates by thermal CVD. The treating time consumed is ≈25% compared to conventional CVD procedure. In addition, we found that high-quality, single-layer graphene can be formed on quartz, but on SiO{sub 2}/Si substrate only few-layer graphene can be obtained. The pronounced substrate effect is attributed to the different dewetting behavior of Ni films on the both substrates at 950 °C.

The performance studies of DKDP crystals grown by a rapid horizontal growth method

Science.gov (United States)

Xie, Xiaoyi; Qi, Hongji; Wang, Bin; Wang, Hu; Chen, Duanyang; Shao, Jianda

2018-04-01

A deuterated potassium dihydrogen phosphate (DKDP) crystal with about 70% deuterium level was grown by a rapid horizontal growth method with independent design equipment, which includes a continuous filtration system. The cooling program during crystal growth was designed according to a self-developed software to catch the size of growing crystal in real time. The crystal structure, optical performance and laser induced damage threshold (LIDT) of this DKDP crystal were investigated in this paper. The deuterium concentration of the crystal was confirmed by the neutron diffraction technique, which was effective and available in determining a complete range of deuteration level. The dielectric property was measured to evaluate the perfection of the lattice. The transmittance and LIDT were carried out further to evaluate the optical and functional properties of this DKDP crystal grown in the rapid horizontal growth technique. All of the detailed characterization for DKDP figured out that the 70% deuterated KDP crystal grown in this way had relatively good qualities.

Water hammer due to rapid bubble growth at a severe accident

International Nuclear Information System (INIS)

Aya, Izuo; Adachi, Masaki; Shiozaki, Koki; Inasaka, Fujio

2000-01-01

On a severe accident of the light water reactor (LWR), by steam explosion and so forth due to hydrogen formation by water-metal reaction and direct contact of molted core with water, it is presumed that a lot of vapor forms for a short time in water at reactor vessel and under part of containment vessel. This study aims at and carries out, under reference of the conventional study results, experimental elucidation on coherence of water block motion due to rapid bubble growth, proposal on reduction method of water hammering, development of water hammer estimating method in an actual reactor, and proposal for upgrading of reliability on severe accident evaluation. In 1998 fiscal year, an 'Experimental apparatus on water hammering elements on sever accident' simulated rapid bubble growth due to steam explosion by injecting high pressure air into water was produced to carry out its function test. As a result of the carried out function tests, extreme water hammering phenomena were observed, by which validity of establishment on the study objects could be confirmed. (G.K.)

Growth perturbations in a phenotype with rapid fetal growth preceding preterm labor and term birth.

Science.gov (United States)

Lampl, Michelle; Kusanovic, Juan Pedro; Erez, Offer; Gotsch, Francesca; Espinoza, Jimmy; Goncalves, Luis; Lee, Wesley; Gomez, Ricardo; Nien, Jyh Kae; Frongillo, Edward A; Romero, Roberto

2009-01-01

The variability in fetal growth rates and gestation duration in humans is not well understood. Of interest are women presenting with an episode of preterm labor and subsequently delivering a term neonate, who is small relative to peers of similar gestational age. To further understand these relationships, fetal growth patterns predating an episode of preterm labor were investigated. Retrospective analysis of fetal biometry assessed by serial ultrasound in a prospectively studied sample of pregnancies in Santiago, Chile, tested the hypothesis that fetal growth patterns among uncomplicated pregnancies (n = 3,706) and those with an episode of preterm labor followed by term delivery (n = 184) were identical across the time intervals 16-22 weeks, 22-28 weeks, and 28-34 weeks in a multilevel mixed-effects regression. The hypothesis was not supported. Fetal weight growth rate was faster from 16 weeks among pregnancies with an episode of preterm labor (P < 0.05), declined across midgestation (22-28 weeks, P < 0.05), and rebounded between 28 and 34 weeks (P = 0.06). This was associated with perturbations in abdominal circumference growth and proportionately larger biparietal diameter from 22 gestational weeks (P = 0.03), greater femur (P = 0.01), biparietal diameter (P = 0.001) and head circumference (P = 0.02) dimensions relative to abdominal circumference across midgestation (22-28 weeks), followed by proportionately smaller femur diaphyseal length (P = 0.02) and biparietal diameter (P = 0.03) subsequently. A distinctive rapid growth phenotype characterized fetal growth preceding an episode of preterm labor among this sample of term-delivered neonates. Perturbations in abdominal circumference growth and patterns of proportionality suggest an altered growth strategy pre-dating the preterm labor episode.

Government expenditure, efficiency and economic growth: a panel ...

African Journals Online (AJOL)

Finally Generalized Methods of Moments (GMM) is applied to answer the two research questions. The results demonstrate that increasing government expenditure accelerates economic growth of low income countries in Sub Saharan Africa. However, when government expenditure is interacted with government efficiency ...

Energy Saving: Scaling Network Energy Efficiency Faster than Traffic Growth

NARCIS (Netherlands)

Chen, Y.; Blume, O.; Gati, A.; Capone, A.; Wu, C.-E.; Barth, U.; Marzetta, T.; Zhang, H.; Xu, S.

2013-01-01

As the mobile traffic is expected to continue its exponential growth in the near future, energy efficiency has gradually become a must criterion for wireless network design. Three fundamental questions need to be answered before the detailed design could be carried out, namely what energy efficiency

Energy Efficiency Services Sector: Workforce Size and Expectations for Growth

Energy Technology Data Exchange (ETDEWEB)

Goldman, Charles; Fuller, Merrian C.; Stuart, Elizabeth; Peters, Jane S.; McRae, Marjorie; Albers, Nathaniel; Lutzenhiser, Susan; Spahic, Mersiha

2010-03-22

The energy efficiency services sector (EESS) is poised to become an increasingly important part of the U.S. economy. Climate change and energy supply concerns, volatile and increasing energy prices, and a desire for greater energy independence have led many state and national leaders to support an increasingly prominent role for energy efficiency in U.S. energy policy. The national economic recession has also helped to boost the visibility of energy efficiency, as part of a strategy to support economic recovery. We expect investment in energy efficiency to increase dramatically both in the near-term and through 2020 and beyond. This increase will come both from public support, such as the American Recovery and Reinvestment Act (ARRA) and significant increases in utility ratepayer funds directed toward efficiency, and also from increased private spending due to codes and standards, increasing energy prices, and voluntary standards for industry. Given the growing attention on energy efficiency, there is a concern among policy makers, program administrators, and others that there is an insufficiently trained workforce in place to meet the energy efficiency goals being put in place by local, state, and federal policy. To understand the likelihood of a potential workforce gap and appropriate response strategies, one needs to understand the size, composition, and potential for growth of the EESS. We use a bottom-up approach based upon almost 300 interviews with program administrators, education and training providers, and a variety of EESS employers and trade associations; communications with over 50 sector experts; as well as an extensive literature review. We attempt to provide insight into key aspects of the EESS by describing the current job composition, the current workforce size, our projections for sector growth through 2020, and key issues that may limit this growth.

Rapid growth of the US wildland-urban interface raises wildfire risk.

Science.gov (United States)

Radeloff, Volker C; Helmers, David P; Kramer, H Anu; Mockrin, Miranda H; Alexandre, Patricia M; Bar-Massada, Avi; Butsic, Van; Hawbaker, Todd J; Martinuzzi, Sebastián; Syphard, Alexandra D; Stewart, Susan I

2018-03-27

The wildland-urban interface (WUI) is the area where houses and wildland vegetation meet or intermingle, and where wildfire problems are most pronounced. Here we report that the WUI in the United States grew rapidly from 1990 to 2010 in terms of both number of new houses (from 30.8 to 43.4 million; 41% growth) and land area (from 581,000 to 770,000 km 2 ; 33% growth), making it the fastest-growing land use type in the conterminous United States. The vast majority of new WUI areas were the result of new housing (97%), not related to an increase in wildland vegetation. Within the perimeter of recent wildfires (1990-2015), there were 286,000 houses in 2010, compared with 177,000 in 1990. Furthermore, WUI growth often results in more wildfire ignitions, putting more lives and houses at risk. Wildfire problems will not abate if recent housing growth trends continue.

Does energy efficiency improve technological change and economic growth in developing countries?

International Nuclear Information System (INIS)

Cantore, Nicola; Calì, Massimiliano; Velde, Dirk Willem te

2016-01-01

Does a trade-off exist between energy efficiency and economic growth? This question underlies some of the tensions between economic and environmental policies, especially in developing countries that often need to expand their industrial base to grow. This paper contributes to the debate by analyzing the relationship between energy efficiency and economic performance at the micro- (total factor productivity) and macro-level (countries' economic growth). It uses data on a large sample of manufacturing firms across 29 developing countries to find that lower levels of energy intensity are associated with higher total factor productivity for the majority of these countries. The results are robust to a variety of checks. Suggestive cross-country evidence points towards the same relation measured at the macro-level as well. - Highlights: •Total factor productivity is an accurate proxy of technological change. •Energy efficiency triggers total factor productivity especially in manufacturing. •Technological change via energy efficiency in manufacturing is an engine of growth.

Protein synthesis, growth and energetics in larval herring (Clupea harengus) at different feeding regimes

DEFF Research Database (Denmark)

Houlihan, D F; Pedersen, B H; Steffensen, J F

1995-01-01

Rates of growth, protein synthesis and oxygen consumption were measured in herring larvae, Clupea harengus, in order to estimate the contribution that protein synthesis makes to oxygen consumption during rapid growth at 8°C. Protein synthesis rates were determined in larvae 9 to 17 d after hatching....... Larvae were bathed in (3)H phenylalanine for several hours and the free pool and protein-bound phenylalanine specific radioactivities were determined.Fractional rates of protein synthesis increased 5 to 11 fold with feeding after a period of fasting. Efficiencies of retention of synthesized protein were...... approximately 50% during rapid growth. Rapid growth in herring larvae thus appears to be characterized by moderate levels of protein turnover similar to those obtained for larger fish. Increases in growth rate occurred without changes in RNA concentration, i.e., the larvae increased the efficiency of RNA...

Rapid Urban Growth and Land Use Patterns in Doha, Qatar: Opportunities for Sustainability?

Directory of Open Access Journals (Sweden)

Vivek Shandas

2017-06-01

Full Text Available Amidst chaotic growth of Asian cities, the expansion of urban infrastructure in the Middle East's Gulf region is arguably outpacing any other region on the planet. Yet we have a limited understanding of the types of urban form or the extent to which this rapid urbanization is giving rise to sustainable patterns of growth. We ask, what is the pace and character of urban growth in one Middle East city, Doha, Qatar. By using remotely sensed imagery from 1987 to 2013, we examined the pace, quality, and characteristics of urban growth. We further use the results to create a typology of urban growth that integrates historical and spatial dimensions for describing the qualitative aspects of growth and its implications on regional landscapes. Our results suggest that Doha is creating development patterns similar to many Western cities, and that planners may need to consider whether the emerging urban form offers opportunities for more sustainable growth in the future.

Rapid growth of the US wildland-urban interface raises wildfire risk

Science.gov (United States)

Volker C. Radeloff; David P. Helmers; H. Anu Kramer; Miranda H. Mockrin; Patricia M. Alexandre; Avi Bar-Massada; Van Butsic; Todd J. Hawbaker; Sebastián Martinuzzi; Alexandra D. Syphard; Susan I. Stewart

2018-01-01

The wildland-urban interface (WUI) is the area where houses and wildland vegetation meet or intermingle, and where wildfire problems are most pronounced. Here we report that the WUI in the United States grew rapidly from 1990 to 2010 in terms of both number of new houses (from 30.8 to 43.4 million; 41% growth) and land area (from 581,000 to 770,000 km2...

Rapid growth in nitrogen dioxide pollution over Western China, 2005-2013

Science.gov (United States)

Cui, Yuanzheng; Lin, Jintai; Song, Chunqiao; Liu, Mengyao; Yan, Yingying; Xu, Yuan; Huang, Bo

2016-05-01

Western China has experienced rapid industrialization and urbanization since the implementation of the National Western Development Strategies (the "Go West" movement) in 1999. This transition has affected the spatial and temporal characteristics of nitrogen dioxide (NO2) pollution. In this study, we analyze the trends and variability of tropospheric NO2 vertical column densities (VCDs) from 2005 to 2013 over Western China, based on a wavelet analysis on monthly mean NO2 data derived from the Ozone Monitoring Instrument (OMI) measurements. We focus on the anthropogenic NO2 by subtracting region-specific "background" values dominated by natural sources. After removing the background influences, we find significant anthropogenic NO2 growth over Western China between 2005 and 2013 (8.6 ± 0.9 % yr-1 on average, relative to 2005), with the largest increments (15 % yr-1 or more) over parts of several city clusters. The NO2 pollution in most provincial-level regions rose rapidly from 2005 to 2011 but stabilized or declined afterwards. The NO2 trends were driven mainly by changes in anthropogenic emissions, as confirmed by a nested GEOS-Chem model simulation and a comparison with Chinese official emission statistics. The rate of NO2 growth during 2005-2013 reaches 11.3 ± 1.0 % yr-1 over Northwestern China, exceeding the rates over Southwestern China (5.9 ± 0.6 % yr-1) and the three well-known polluted regions in the east (5.3 ± 0.8 % yr-1 over Beijing-Tianjin-Hebei, 4.0 ± 0.6 % yr-1 over the Yangtze River Delta, and -3.3 ± 0.3 % yr-1 over the Pearl River Delta). Subsequent socioeconomic analyses suggest that the rapid NO2 growth over Northwestern China is likely related to the fast developing resource- and pollution-intensive industries along with the "Go West" movement as well as relatively weak emission controls. Further efforts should be made to alleviate NOx pollution to achieve sustainable development in Western China.

Rapid growth in nitrogen dioxide pollution over Western China, 2005-2013

Science.gov (United States)

Cui, Y.-Z.; Lin, J.-T.; Song, C.; Liu, M.-Y.; Yan, Y.-Y.; Xu, Y.; Huang, B.

2015-12-01

Western China has experienced rapid industrialization and urbanization since the implementation of the National Western Development Strategies (the "Go West" movement) in 1999. This transition has affected the spatial and temporal characteristics of nitrogen dioxide (NO2) pollution. In this study, we analyze the trends and variability of tropospheric NO2 vertical column densities (VCDs) from 2005 to 2013 over Western China, based on a wavelet analysis on monthly mean NO2 data derived from the Ozone Monitoring Instrument (OMI) measurements. We focus on the anthropogenic NO2 by subtracting region-specific "background" values dominated by natural sources. We find significant NO2 growth over Western China between 2005 and 2013 (8.6 ± 0.9 % yr-1 on average, relative to 2005), with the largest increments (15 % yr-1 or more) over parts of several city clusters. The NO2 pollution in most provincial regions rose rapidly from 2005 to 2011 but stabilized or declined afterwards. The NO2 trends were driven mainly by changes in anthropogenic emissions, as confirmed by a nested GEOS-Chem model simulation and a comparison with Chinese official emission statistics. The rate of NO2 growth during 2005-2013 reaches 11.3 ± 1.0 % yr-1 over Northwestern China, exceeding the rates over Southwestern China (5.9 ± 0.6 % yr-1) and the three well-known polluted regions in the east (5.3 ± 0.8 % yr-1 over Beijing-Tianjin-Hebei, 4.0 ± 0.6 % yr-1} over the Yangtze River Delta, and -3.3 ± 0.3 % yr-1 over the Pearl River Delta). Additional socioeconomic analyses suggest that the rapid NO2 growth in Northwestern China is likely related to the fast developing resource- and pollution-intensive industries along with the "Go West" movement as well as relatively weak emission controls. Further efforts should be made to alleviate NOx pollution to achieve sustainable development in Western China.

A Simple, Rapid and Efficient One-pot Protocol for the Synthesis of 2 ...

African Journals Online (AJOL)

NJD

A rapid and efficient condensation reaction of 2-aminothiophenol with various fatty acids in solvent-free conditions with or without microwave irradiation was ... heterocyclic compounds that have widespread applications in pharmaceutical and ... catalyzed reaction of aryl halides with o-aminothiophenol in presence of carbon ...

Multiple gingival pregnancy tumors with rapid growth

Directory of Open Access Journals (Sweden)

Wei-Lian Sun

2014-09-01

Full Text Available Pregnancy gingivitis is an acute form of gingivitis that affects pregnant women, with a prevalence of 30%, possibly ranging up to 100%. Sometimes, pregnancy gingivitis shows a tendency toward a localized hyperplasia called gingival pyogenic granuloma. Pregnancy tumor is a benign gingival hyperplasia with the gingiva as the most commonly involved site, but rarely it involves almost the entire gingiva. A 22-year-old woman was referred to our clinic with a chief complaint of gingival swelling that had lasted for 2 days. The lesions progressed rapidly and extensively, and almost all the gingiva was involved a week later. Generalized erythema, edema, hyperplasia, a hemorrhagic tendency, and several typical hemangiomatous masses were noted. Pregnancy was denied by the patient at the first and second visits, but was confirmed 2 weeks after the primary visit. The patient was given oral hygiene instructions. She recovered well, and the mass gradually regressed and had disappeared completely at the end of 12 weeks of pregnancy, without recurrence. The gingival lesions were finally diagnosed as multiple gingival pregnancy tumors. The patient delivered a healthy infant. An extensive and rapid growth of gingival pregnancy tumors during the early first month of pregnancy is a rare occurrence that is not familiar to dentists, gynecologists, and obstetricians. Those practitioners engaged in oral medicine and periodontology, primary care obstetrics, and gynecology should be aware of such gingival lesions to avoid misdiagnosis and overtreatment.

Rapid and Efficient Collection of Platinum from Karstedt's Catalyst Solution via Ligands-Exchange-Induced Assembly.

Science.gov (United States)

Yang, Gonghua; Wei, Yanlong; Huang, Zhenzhu; Hu, Jiwen; Liu, Guojun; Ou, Ming; Lin, Shudong; Tu, Yuanyuan

2018-02-21

Reported herein is a novel strategy for the rapid and efficient collection of platinum from Karstedt's catalyst solution. By taking advantage of a ligand-exchange reaction between alkynols and the 1,3-divinyltetramethyldisiloxane ligand (M Vi M Vi ) that coordinated with platinum (Pt(0)), the Karstedt's catalyst particles with a size of approximately 2.5 ± 0.7 nm could be reconstructed and assembled into larger particles with a size of 150 ± 35 nm due to the hydrogen bonding between the hydroxyl groups of the alkynol. In addition, because the silicone-soluble M Vi M Vi ligand of the Karstedt's catalyst was replaced by water-soluble alkynol ligands, the resultant large particles were readily dispersed in water, resulting in rapid, efficient, and complete collection of platinum from the Karstedt's catalyst solutions with platinum concentrations in the range from ∼20 000 to 0.05 ppm. Our current strategy not only was used for the rapid and efficient collection of platinum from the Karstedt's catalyst solutions, but it also enabled the precise evaluation of the platinum content in the Karstedt's catalysts, even if this platinum content was extremely low (i.e., 0.05 ppm). Moreover, these platinum specimens that were efficiently collected from the Karstedt's catalyst solutions could be directly used for the evaluation of platinum without the need for pretreatment processes, such as calcination and digestion with hydrofluoric acid, that were traditionally used prior to testing via inductively coupled plasma mass spectrometry in conventional methods.

The status of silicon ribbon growth technology for high-efficiency silicon solar cells

Science.gov (United States)

Ciszek, T. F.

1985-01-01

More than a dozen methods have been applied to the growth of silicon ribbons, beginning as early as 1963. The ribbon geometry has been particularly intriguing for photovoltaic applications, because it might provide large area, damage free, nearly continuous substrates without the material loss or cost of ingot wafering. In general, the efficiency of silicon ribbon solar cells has been lower than that of ingot cells. The status of some ribbon growth techniques that have achieved laboratory efficiencies greater than 13.5% are reviewed, i.e., edge-defined, film-fed growth (EFG), edge-supported pulling (ESP), ribbon against a drop (RAD), and dendritic web growth (web).

Rapid and efficient method to extract metagenomic DNA from estuarine sediments.

Science.gov (United States)

Shamim, Kashif; Sharma, Jaya; Dubey, Santosh Kumar

2017-07-01

Metagenomic DNA from sediments of selective estuaries of Goa, India was extracted using a simple, fast, efficient and environment friendly method. The recovery of pure metagenomic DNA from our method was significantly high as compared to other well-known methods since the concentration of recovered metagenomic DNA ranged from 1185.1 to 4579.7 µg/g of sediment. The purity of metagenomic DNA was also considerably high as the ratio of absorbance at 260 and 280 nm ranged from 1.88 to 1.94. Therefore, the recovered metagenomic DNA was directly used to perform various molecular biology experiments viz. restriction digestion, PCR amplification, cloning and metagenomic library construction. This clearly proved that our protocol for metagenomic DNA extraction using silica gel efficiently removed the contaminants and prevented shearing of the metagenomic DNA. Thus, this modified method can be used to recover pure metagenomic DNA from various estuarine sediments in a rapid, efficient and eco-friendly manner.

The Great Transformations of Tibet and Xinjiang: a comparative analysis of rapid labour transitions in times of rapid growth in two contested minority regions of China

NARCIS (Netherlands)

A.M. Fischer (Andrew Martín)

2011-01-01

textabstractRapid growth since the mid-1990s in the Tibetan and Uyghur areas in Western China has been associated with the rapid transition of the local (mostly Tibetan and Uyghur) labour forces out of the primary sector (mostly farming and herding) and into the tertiary sector (services). The TAR,

Developmental plasticity of growth and digestive efficiency in dependence of early-life food availability

Science.gov (United States)

Kotrschal, Alexander; Szidat, Sönke; Taborsky, Barbara

2014-01-01

Nutrition is a potent mediator of developmental plasticity. If food is scarce, developing organisms may invest into growth to outgrow size-dependent mortality (short-term benefit) and/or into an efficient digestion system (long-term benefit). We investigated this potential trade-off, by determining the influence of food availability on juvenile body and organ growth, and on adult digestive efficiency in the cichlid fish Simochromis pleurospilus. We reared two groups of fish at constant high or low food rations, and we switched four other groups between these two rations at an early and late juvenile period. We measured juvenile growth and organ sizes at different developmental stages and determined adult digestive efficiency. Fish kept at constant, high rations grew considerably faster than low-food fish. Nevertheless, S. pleurospilus partly buffered the negative effects of low food availability by developing heavier digestive organs, and they were therefore more efficient in digesting their food as adults. Results of fish exposed to a ration switch during either the early or late juvenile period suggest (i) that the ability to show compensatory growth after early exposure to low food availability persists during the juvenile period, (ii) that digestive efficiency is influenced by varying juvenile food availability during the late juvenile phase and (iii) that the efficiency of the adult digestive system is correlated with the growth rate during a narrow time window of juvenile period. PMID:25866430

Compound Synthesis or Growth and Development of Roots/Stomata Regulate Plant Drought Tolerance or Water Use Efficiency/Water Uptake Efficiency.

Science.gov (United States)

Meng, Lai-Sheng

2018-04-11

Water is crucial to plant growth and development because it serves as a medium for all cellular functions. Thus, the improvement of plant drought tolerance or water use efficiency/water uptake efficiency is important in modern agriculture. In this review, we mainly focus on new genetic factors for ameliorating drought tolerance or water use efficiency/water uptake efficiency of plants and explore the involvement of these genetic factors in the regulation of improving plant drought tolerance or water use efficiency/water uptake efficiency, which is a result of altered stomata density and improving root systems (primary root length, hair root growth, and lateral root number) and enhanced production of osmotic protectants, which is caused by transcription factors, proteinases, and phosphatases and protein kinases. These results will help guide the synthesis of a model for predicting how the signals of genetic and environmental stress are integrated at a few genetic determinants to control the establishment of either water use efficiency or water uptake efficiency. Collectively, these insights into the molecular mechanism underpinning the control of plant drought tolerance or water use efficiency/water uptake efficiency may aid future breeding or design strategies to increase crop yield.

Body composition and energetic efficiency in two lines of mice selected for rapid growth rate and their F1 crosses.

Science.gov (United States)

Eisen, E J; Bakker, H; Nagai, J

1977-01-01

Correlated responses to selection for increased growth rate were compared in two mouse populations (M16 and H6) of distinct genetic origin. Traits studied were body composition, feed intake, constituent gains and energetic efficiency. When compared with their respective controls (ICR and C2) at 6 and 9 weeks of age, body weight increased more in M16 (57%and 69 % of the control mean) than in H6 (40 % and 34%). The M16 showed correlated responses in fat percent of 2.6% (P .05). The correlated responses in fat percent were 2.7 and 4.7 times higher in M16 than H6 at 6 and 9 weeks. The regression of ln fat weight on ln empty body weight was larger in M16 (P calories and ash; fat and caloric gain and efficiency exhibited higher correlated responses in M16 than H6. During the 6- to 9-week interval, the M16 population continued to evince positive correlated responses in gains and efficiencies of fat, protein and calories, whereas H6 did not. Several possible explanations are presented to account for the differences in correlated responses between the selected populations. Partitioning of correlated response differences between M16 and H6 into average direct and average maternal genetic effects indicated that average direct genetic effects, favoring M16, were responsible for the major difference between the selected populations. Direct heterosis in F1 crosses of the selected populations were generally not significant, although there was a tendency for fat percent and fat weight to show heterosis.

Rapid growth, early maturation and short generation time in African annual fishes

Czech Academy of Sciences Publication Activity Database

Blažek, Radim; Polačik, Matej; Reichard, Martin

2013-01-01

Roč. 4, č. 24 (2013), s. 24 ISSN 2041-9139 R&D Projects: GA ČR(CZ) GAP506/11/0112 Institutional support: RVO:68081766 Keywords : extreme life history * annual fish * explosive growth * rapid maturation * generation time * killifish * diapause * vertebrate * reaction norm * Savanna Subject RIV: EG - Zoology Impact factor: 3.104, year: 2013 http://www.evodevojournal.com/content/4/1/24

The rapid growth of domestic oil consumption in Saudi Arabia and the opportunity cost of oil exports foregone

International Nuclear Information System (INIS)

Gately, Dermot; Al-Yousef, Nourah; Al-Sheikh, Hamad M.H.

2012-01-01

We analyze the rapid growth of Saudi Arabia's domestic oil consumption, a nine-fold increase in 40 years, to nearly 3 million barrels per day, about one-fourth of production. Such rapid growth in consumption – 5.7% annually, which is 37% faster than its income growth of 4.2% – will challenge Saudi Arabia's ability to increase its oil exports, which are relied upon in long-term world oil projections by the International Energy Agency (IEA), US Department of Energy (DOE) and British Petroleum (BP). However, these institutions assume unprecedented slowdowns in Saudi oil consumption – from 5.7% annual growth historically to less than 2% in the future – allowing them to project increases in Saudi oil exports. Using 1971–2010 data, we estimate that the income responsiveness (elasticity) of oil consumption is at least 1.5—using both Ordinary Least Squares regression and Cointegration methods. We believe that continued high growth rates for domestic oil consumption are more likely than the dramatic slowdowns projected by IEA, DOE and BP. This will have major implications for Saudi production and export levels. - Highlights: ► We analyze the rapid growth of Saudi Arabia's domestic oil consumption, now one-fourth of production. ► Estimated income elasticity of oil demand at least 1.5, using OLS and Co-integration. ► Yet IEA, DOE and BP project unprecedented slowdowns, from 5.7% historically to below 2%, half the rate of income growth. ► Continued high growth rates are more likely, with major implications for Saudi production and export levels.

Crystal growth for high-efficiency silicon solar cells workshop: Summary

Science.gov (United States)

Dumas, K. A.

1985-01-01

The state of the art in the growth of silicon crystals for high-efficiency solar cells are reviewed, sheet requirements are defined, and furture areas of research are identified. Silicon sheet material characteristics that limit cell efficiencies and yields were described as well as the criteria for the ideal sheet-growth method. The device engineers wish list to the material engineer included: silicon sheet with long minority carrier lifetime that is uniform throughout the sheet, and which doesn't change during processing; and sheet material that stays flat throughout device processing, has uniform good mechanical strength, and is low cost. Impurities in silicon solar cells depreciate cell performance by reducing diffusion length and degrading junctions. The impurity behavior, degradation mechanisms, and variations in degradation threshold with diffusion length for silicon solar cells were described.

A comparison of test statistics for the recovery of rapid growth-based enumeration tests

NARCIS (Netherlands)

van den Heuvel, Edwin R.; IJzerman-Boon, Pieta C.

This paper considers five test statistics for comparing the recovery of a rapid growth-based enumeration test with respect to the compendial microbiological method using a specific nonserial dilution experiment. The finite sample distributions of these test statistics are unknown, because they are

An analysis of social consequences of rapid fertility decline in China.

Science.gov (United States)

Liu, Z; Liu, L

1988-12-01

Rapid fertility decline in China has brought about 2 direct effects: 1) the natural increase of the population has slowed down, and 2) the age structure has changed from the young to the adult type. These 2 effects have caused a series of economic and social consequences. Rapid fertility decline increases the gross national product per capita and accelerates the improvement of people's lives. Rapid fertility decline slows population growth and speeds up the accumulation of capital and the development of the economy. Since 1981, accumulation growth has exceeded consumption growth. Fertility decline alleviates the enrollment pressure on primary and secondary schools, raises the efficiency of education funds, and promotes the popularization of education. The family planning program strengthens the maternal and child health care and the medical care systems. As the result of economic development, the people's nutritional levels are improving. The physical quality of teenagers has improved steadily. The change in the age structure will alleviate the tension of rapid population growth and benefit population control in the next century. Fertility decline forces the traditional attitude toward childbearing from "more children, more happiness" to improved quality of children. The rapid fertility decline has caused a great deal of concern both inside and outside China about the aging of the population. The labor force, however, will continue to grow for the next 60 years. At present, China's population problems are still those of population growth.

Technological growth of fuel efficiency in european automobile market 1975–2015

International Nuclear Information System (INIS)

Hu, Kejia; Chen, Yuche

2016-01-01

This paper looks at the technological growth of new car fleet fuel efficiency in the European Union between 1975 and 2015. According to the analysis results, from1975 to 2006 the fuel efficiency technology improvements were largely offset by vehicles' increased weight, engine size, and consumer amenities such as acceleration capacity. After 2006, downsizing in weight and engine capacity was observed in new car fleet, while fuel consumption decreased by 32% between 2006 and 2015. We adopt a statistical method and find that from 1975 to 2015, a 1% increase in weight would result in 0.3 to 0.5% increments in fuel consumption per 100 km, and a 1% reduction in 0–100 km/h acceleration time would increase fuel consumption by about 0.3%. Impacts of other attributes on fuel consumption are also assessed. To meet the European Union's 2021 fuel consumption target, downsizing of cars, as well as at least maintaining fuel efficiency technology growth trend observed between 2005 and 2015, are needed. Government policies on controlling improvement in acceleration performance or promoting alternative fuel vehicles are also important to achieve European Union 2021 target. - Highlights: • We evaluated fuel efficiency technological growth trends in European cars. • We quantified trade-offs between vehicle attributes and fuel consumption using statistical methods. • Technology development was offset by upsizing and upgrading of cars in 1975–2006. • Technology development and downsizing enabled large improvements in efficiency in 2006–2015. • Maintaining historical trend of efficiency improvement is not enough to achieve EU 2021 target.

Green and technical efficient growth in Danish fresh water aquaculture

DEFF Research Database (Denmark)

Nielsen, Rasmus

2011-01-01

growth can be achieved by introducing new environmentally friendly water purification systems in Danish fresh water aquaculture. Data Envelopment Analysis is used to investigate whether different water purification systems and farm size influence technical efficiency. The empirical results indicate...

Growth and nutrient efficiency of Betula alnoides clones in response to phosphorus supply

Directory of Open Access Journals (Sweden)

Lin Chen

2016-12-01

Full Text Available As phosphorus deficiency limits the productivity of many plantation forests in Asia, there is considerable interest in developing phosphorus-efficient clones for the region through targeted breeding programs. Therefore, we determined growth, nutrient concentrations and nutrient absorption and utility efficiencies of four Betula alnoides clones (C5, C6, 1-202 and BY1 in response to six phosphorus levels of 0, 17, 52, 70, 140 and 209 mg P plant-1 coded as P1 to P6, respectively. Maximum growth occurred in the P4, P5 and P6 plants since they had the largest height, biomass, leaf area and branch number. Phosphorus application increased the phosphorus concentrations of all clones. Nutrient loading was achieved with the P6 treatment because growth and biomass were not significantly higher, but root, stem and leaf phosphorus concentrations were approximately twice those of P4 plants. Clone BY1 had the highest phosphorus-efficiency, and is recommended for field application due to its maximum root collar diameter, biomass, root/shoot ratio, leaf area, nutrient absorption and utility efficiency among the four clones. The findings will help to improve the nutrient efficiency of this species in plantation forestry in Asia.

Prenatal exposure to traffic pollution: associations with reduced fetal growth and rapid infant weight gain.

Science.gov (United States)

Fleisch, Abby F; Rifas-Shiman, Sheryl L; Koutrakis, Petros; Schwartz, Joel D; Kloog, Itai; Melly, Steven; Coull, Brent A; Zanobetti, Antonella; Gillman, Matthew W; Gold, Diane R; Oken, Emily

2015-01-01

Prenatal air pollution exposure inhibits fetal growth, but implications for postnatal growth are unknown. We assessed weights and lengths of US infants in the Project Viva cohort at birth and 6 months. We estimated 3rd-trimester residential air pollution exposures using spatiotemporal models. We estimated neighborhood traffic density and roadway proximity at birth address using geographic information systems. We performed linear and logistic regression adjusted for sociodemographic variables, fetal growth, and gestational age at birth. Mean birth weight-for-gestational age z-score (fetal growth) was 0.17 (standard deviation [SD] = 0.97; n = 2,114), 0- to 6-month weight-for-length gain was 0.23 z-units (SD = 1.11; n = 689), and 17% had weight-for-length ≥95th percentile at 6 months of age. Infants exposed to the highest (vs. lowest) quartile of neighborhood traffic density had lower fetal growth (-0.13 units [95% confidence interval (CI) = -0.25 to -0.01]), more rapid 0- to 6-month weight-for-length gain (0.25 units [95% CI = 0.01 to 0.49]), and higher odds of weight-for-length ≥95th percentile at 6 months (1.84 [95% CI = 1.11 to 3.05]). Neighborhood traffic density was additionally associated with an infant being in both the lowest quartile of fetal growth and the highest quartile of 0- to 6-month weight-for-length gain (Q4 vs. Q1, odds ratio = 3.01 [95% CI = 1.08 to 8.44]). Roadway proximity and 3rd-trimester black carbon exposure were similarly associated with growth outcomes. For 3rd-trimester particulate matter (PM2.5), effect estimates were in the same direction, but smaller and imprecise. Infants exposed to higher traffic-related pollution in early life may exhibit more rapid postnatal weight gain in addition to reduced fetal growth.

Large plasma-membrane depolarization precedes rapid blue-light-induced growth inhibition in cucumber

Science.gov (United States)

Spalding, E. P.; Cosgrove, D. J.

1989-01-01

Blue-light (BL)-induced suppression of elongation of etiolated Cucumis sativus L. hypocotyls began after a 30-s lag time, which was halved by increasing the fluence rate from 10 to 100 micromoles m-2 s-1. Prior to the growth suppression, the plasma-membrane of the irradiated cells depolarized by as much as 100 mV, then returned within 2-3 min to near its initial value. The potential difference measured with surface electrodes changed with an identical time course but opposite polarity. The lag time for the change in surface potential showed an inverse dependence on fluence rate, similar to the lag for the growth inhibition. Green light and red light caused neither the electrical response nor the rapid inhibition of growth. The depolarization by BL did not propagate to nonirradiated regions and exhibited a refractory period of about 10 min following a BL pulse. Fluence-response relationships for the electrical and growth responses provide correlational evidence that the plasma-membrane depolarization reflects an event in the transduction chain of this light-growth response.

Growth, light interception, radiation use efficiency and productivity of ...

African Journals Online (AJOL)

The purpose of this study was to assess the influence of sowing date on growth, light interception, radiation use efficiency and productivity of mungbean cultivars. The experiment comprised four sowing dates at ten days interval, viz. 08, 18, 28 July and 07 August 2006 and two cultivars, viz. Gofa local and MH-97-6.

Electricity supply efficiency and organizational growth and profitability in Lagos, Nigeria

Science.gov (United States)

Adeleke, Adedeji Tajudeen

A modern and efficient infrastructure is a basic necessity for economic development and integration into the global economy. The specific problem was the inadequate and unreliable supply of electricity to manufacturing corporations in Lagos, Nigeria. The purpose of the current quantitative correlational research study was to examine if there was a correlation between electricity supply efficiency and organizational growth and profitability in manufacturing corporations in Lagos, Nigeria. The population of the current correlational research study involved 28 out of 34 manufacturing corporations from various industrial sectors in Lagos, Nigeria, that are listed and traded on the Nigerian Stock Exchange. Spearman rho correlations were used to assess the relationships between independent variables of electricity supply efficiency levels and the dependent variables of organizational growth and profitability. The result of the correlational analysis of the data revealed that there was a statistically significant, strong positive correlation between the Average Gross Income (1998-2007) and Average Actual Electricity supply efficiency level (1998-2007), rho = 0.57; p = 0.002. A statistically significant, strong positive correlation was found between the Average Balance Sheet Size (1998-2007) and Average Actual Electricity Supply Efficiency Level (1998-2007), rho = 0.54; p = 0.003. A statistically significant, strong positive correlation between the Average Profit After Tax (1998-2007) and Average Actual Electricity Supply Efficiency Level (1998-2007), rho = 0.60; p = 0.001, was found. No statistically significant correlation between the Average Return on Investment (1998-2007) and Average Actual Electricity supply efficiency level (1998-2007), rho = 0.19; p = 0.33, was discovered.

Inherent variation in growth efficiency of African catfish Clarias gariepinus (Burchell, 1822) juveniles

NARCIS (Netherlands)

Matos Martins, de C.I.; Schrama, J.W.; Verreth, J.A.J.

2005-01-01

Understanding the major causes of growth variation is crucial for the success of fish farming since its reduction contributes to maximize production efficiency, reduce food waste and improve water quality. The growth variation observed in aquaculture has been associated with the establishment of

Eco-Efficiency Actions and Firm Growth in European SMEs

Directory of Open Access Journals (Sweden)

Elisenda Jové-Llopis

2018-01-01

Full Text Available This study investigates the effects of eco-efficiency actions on firm performance in terms of sales growth in an extensive sample of 11,336 small- and medium-sized enterprises (SMEs located in 28 European countries. Our empirical results suggest that not all eco-strategies are positively related to better performance, at least not in the short term. We found that European companies using renewable energies, and recycling or designing products that are easier to maintain, repair, or reuse, perform better. Those that aim to reduce water or energy pollution, however, seemed to show a negative correlation to firm growth. Our results also indicate that high investment in eco-strategies improves firm growth, particularly in new members that joined the EU from 2004 onwards. Finally, we observed a U-shaped relationship between eco-strategies and firm growth, which indicates that a greater breadth of eco-strategies is associated with better firm performance. However, few European SMEs are able to either invest heavily or undertake multiple eco-strategies, thus leaving room for policy interventions.

Growth medium for the rapid isolation and identification of anthrax

Science.gov (United States)

Kiel, Johnathan L.; Parker, Jill E.; Grubbs, Teri R.; Alls, John L.

2000-07-01

Anthrax has been recognized as a highly likely biological warfare or terrorist agent. The purpose of this work was to design a culture technique to rapidly isolate and identify `live' anthrax. In liquid or solid media form, 3AT medium (3-amino-L-tyrosine, the main ingredient) accelerated germination and growth of anthrax spores in 5 to 6 hours to a point expected at 18 to 24 hours with ordinary medium. During accelerated growth, standard definitive diagnostic tests such as sensitivity to lysis by penicillin or bacteriophage can be run. During this time, the bacteria synthesized a fluorescent and thermochemiluminescent polymer. Bacteria captured by specific antibody are, therefore, already labeled. Because living bacteria are required to generate the polymer, the test converts immunoassays for anthrax into viability assays. Furthermore, the polymer formation leads to the death of the vegetative form and non-viability of the spores produced in the medium. By altering the formulation of the medium, other microbes and even animal and human cells can be grown in it and labeled (including viruses grown in the animal or human cells).

Scalable Approach to Highly Efficient and Rapid Capacitive Deionization with CNT-Thread As Electrodes.

Science.gov (United States)

Moronshing, Maku; Subramaniam, Chandramouli

2017-11-22

A scalable route to highly efficient purification of water through capacitive deionization (CDI) is reported using CNT-thread as electrodes. Electro-sorption capacity (q e ) of 139 mg g -1 and average salt-adsorption rate (ASAR) of 2.78 mg g -1 min -1 achieved here is the highest among all known electrode materials and nonmembrane techniques, indicating efficient and rapid deionization. Such exceptional performance is achieved with feedstock concentrations (≤1000 ppm) where conventional techniques such as reverse osmosis and electrodialysis prove ineffective. Further, both cations (Na + , K + , Mg 2+ , and Ca 2+ ) and anions (Cl - , SO 4 2- and NO 3 - ) are removed with equally high efficiency (∼80%). Synergism between electrical conductivity (∼25 S cm -1 ), high specific surface area (∼900 m 2 g -1 ), porosity (0.7 nm, 3 nm) and hydrophilicity (contact angle ∼25°) in CNT-thread electrode enable superior contact with water, rapid formation of extensive electrical double layer and consequently efficient deionization. The tunable capacitance of the device (0.4-120 mF) and its high specific capacitance (∼27.2 F g -1 ) enable exceptional performance across a wide range of saline concentrations (50-1000 ppm). Facile regeneration of the electrode and reusability of the device is achieved for several cycles. The device demonstrated can desalinate water as it trickles down its surface because of gravity, thereby eliminating the requirement of any water pumping system. Finally, its portable adaptability is demonstrated by operating the device with an AA battery.

An Inquiry into the Rapid Growth of the Garment Industry in Bangladesh

OpenAIRE

MOTTALEB, Khondoker Abdul; SONOBE, Tetsushi

2011-01-01

The export-oriented garment industry in Bangladesh has grown rapidly for the last three decades and now ranks among the largest garment exporters in the world. While its early success is attributed to the initial technology transfer from South Korea, such a one-time infusion of knowledge alone is insufficient to explain the sustained growth for three decades. This paper uses primary data collected from knitwear manufacturers and garment traders to explore the process of the continuous learnin...

Industrial policy, production efficiency improvement and the Chinese county economic growth

Directory of Open Access Journals (Sweden)

Wang Zhenhua

2016-12-01

Full Text Available This study aims at analyzing the difference in the level of economic development between China’s counties from the two perspectives of industrial policy and production efficiency. Based on panel data of 1830 Chinese counties, this study employs the new classical economic growth theory framework to analyze the counties’ economic growth by the perpetual inventory method, Malmquist index, among others. The results show that the economy of the counties exhibits δ convergence since 2004, and the absolute differences in the different counties are expanding. Industrial policy ensures the additional deepening of the level of capital in the county. Additionally, a substantial difference was observed between the agricultural sector and the non-agricultural sector, whereby the total factor productivity and the technical efficiency are on the rise, resulting in the phenomenon of dual paths of technological progress. In summary, the capital deepening difference between the sectors, production efficiency, and dual paths of technological progress owing to the counties’ industrial policy are the basic reasons for the regional differences in the level of economic development in China.

The impact of rapid economic growth and globalization on zinc nutrition in South Korea.

Science.gov (United States)

Kwun, In-Sook; Do, Mi-Sook; Chung, Hae-Rang; Kim, Yang Ha; Beattie, John H

2009-08-01

Zn deficiency may be widespread in Asian countries such as South Korea. However, dietary habits have changed in response to rapid economic growth and globalization. Zn nutrition in South Koreans has therefore been assessed during a period (1969-1998) of unprecedented economic growth. Cross-sectional food consumption data from the Korean National Nutrition Survey Reports (KNNSR) of South Korea at four separate time points (1969, 1978, 1988 and 1998) were used to calculate Zn, Ca and phytate intakes using various food composition tables, databases and literature values. Nutrient values in local foods were cited from their analysed values. Average Zn intake was 5.8, 4.8 and 5.3 mg/d for 1969, 1978 and 1988 respectively, increasing to 7.3 mg/d in 1998 (73 % of the Korean Dietary Reference Intake). The phytate:Zn molar ratio decreased from 21 to 8 during the study period. Dietary Zn depletion due to marked decreases in cereal consumption, particularly barley which has a low Zn bioavailability, was counterbalanced by marked increases in the consumption of meat and fish, which are also Zn-rich foods. Reduced phytate consumption coincident with increased Zn intake suggests that Zn bioavailability also improved, particularly by 1998. Although total Zn intake was not greatly affected over the initial period of economic growth in South Korea (1969-1988), Zn contributions from different food sources changed markedly and both Zn intake and potential bioavailability were improved by 1998. The study may have implications for Zn nutrition in other Asian countries currently experiencing rapid economic growth.

Modelling of Efficiency Change as a Source of Economic Growth in Agriculture

Directory of Open Access Journals (Sweden)

Bezat-Jarzębowska Agnieszka

2016-12-01

Full Text Available In the paper, the subject of economic growth in agriculture was raised. One of the determinants of this process, namely an efficiency change was under the assessment. The aim of the paper was to evaluate the changes of efficiency in the Polish agriculture. In the study, a stochastic parametric production function was used.

Fetal and neonatal programming of postnatal growth and feed efficiency in swine.

Science.gov (United States)

Ji, Yun; Wu, Zhenlong; Dai, Zhaolai; Wang, Xiaolong; Li, Ju; Wang, Binggen; Wu, Guoyao

2017-01-01

Maternal undernutrition or overnutrition during pregnancy alters organ structure, impairs prenatal and neonatal growth and development, and reduces feed efficiency for lean tissue gains in pigs. These adverse effects may be carried over to the next generation or beyond. This phenomenon of the transgenerational impacts is known as fetal programming, which is mediated by stable and heritable alterations of gene expression through covalent modifications of DNA and histones without changes in DNA sequences (namely, epigenetics). The mechanisms responsible for the epigenetic regulation of protein expression and functions include chromatin remodeling; DNA methylation (occurring at the 5´-position of cytosine residues within CpG dinucleotides); and histone modifications (acetylation, methylation, phosphorylation, and ubiquitination). Like maternal malnutrition, undernutrition during the neonatal period also reduces growth performance and feed efficiency (weight gain:feed intake; also known as weight-gain efficiency) in postweaning pigs by 5-10%, thereby increasing the days necessary to reach the market body-weight. Supplementing functional amino acids (e.g., arginine and glutamine) and vitamins (e.g., folate) play a key role in activating the mammalian target of rapamycin signaling and regulating the provision of methyl donors for DNA and protein methylation. Therefore, these nutrients are beneficial for the dietary treatment of metabolic disorders in offspring with intrauterine growth restriction or neonatal malnutrition. The mechanism-based strategies hold great promise for the improvement of the efficiency of pork production and the sustainability of the global swine industry.

Hydrothermal vents in Lake Tanganyika harbor spore-forming thermophiles with extremely rapid growth

DEFF Research Database (Denmark)

Elsgaard, Lars; Prieur, Daniel

2010-01-01

A thermophilic anaerobic bacterium was isolated from a sublacustrine hydrothermal vent site in Lake Tanganyika (East Africa) with recorded fluid temperatures of 66–103 °C and pH values of 7.7–8.9. The bacterium (strain TR10) was rod-shaped, about 1 by 5 μm in size, and readily formed distal...... and peptone. The optimum temperature for growth was 60 °C, while minimum and maximum temperatures were 40 and 75 °C. The pH response was alkalitolerant with optimum pH at 7.4 and 8.5 depending on the growth medium. The distinct feature of rapid proliferation and endospore formation may allow the novel...

The Impact of Innovation, Firm Growth and Perceptions on Technical and Scale Efficiency

NARCIS (Netherlands)

Bremmer, J.; Oude Lansink, A.G.J.M.; Huirne, R.B.M.

2008-01-01

This paper uses a two-stage approach to analyse efficiency and productivity of Dutch glasshouse firms over the period 1991-1998. The first stages uses DEA to determine productivity growth and technical and scale efficiency; the second stage applies a TOBIT model to explain technical and scale

Oxidation phase growth diagram of vanadium oxides film fabricated by rapid thermal annealing

Institute of Scientific and Technical Information of China (English)

Tamura KOZO; Zheng-cao LI; Yu-quan WANG; Jie NI; Yin HU; Zheng-jun ZHANG

2009-01-01

Thermal evaporation deposited vanadium oxide films were annealed in air by rapid thermal annealing (RTP). By adjusting the annealing temperature and time, a series of vanadium oxide films with various oxidation phases and surface morphologies were fabricated, and an oxidation phase growth diagram was established. It was observed that different oxidation phases appear at a limited and continuous annealing condition range, and the morphologic changes are related to the oxidation process.

Acquired phototrophy through retention of functional chloroplasts increases growth efficiency of the sea slug Elysia viridis.

Directory of Open Access Journals (Sweden)

Finn A Baumgartner

Full Text Available Photosynthesis is a fundamental process sustaining heterotrophic organisms at all trophic levels. Some mixotrophs can retain functional chloroplasts from food (kleptoplasty, and it is hypothesized that carbon acquired through kleptoplasty may enhance trophic energy transfer through increased host growth efficiency. Sacoglossan sea slugs are the only known metazoans capable of kleptoplasty, but the relative fitness contributions of heterotrophy through grazing, and phototrophy via kleptoplasts, are not well understood. Fitness benefits (i.e. increased survival or growth of kleptoplasty in sacoglossans are commonly studied in ecologically unrealistic conditions under extended periods of complete darkness and/or starvation. We compared the growth efficiency of the sacoglossan Elysia viridis with access to algal diets providing kleptoplasts of differing functionality under ecologically relevant light conditions. Individuals fed Codium fragile, which provide highly functional kleptoplasts, nearly doubled their growth efficiency under high compared to low light. In contrast, individuals fed Cladophora rupestris, which provided kleptoplasts of limited functionality, showed no difference in growth efficiency between light treatments. Slugs feeding on Codium, but not on Cladophora, showed higher relative electron transport rates (rETR in high compared to low light. Furthermore, there were no differences in the consumption rates of the slugs between different light treatments, and only small differences in nutritional traits of algal diets, indicating that the increased growth efficiency of E. viridis feeding on Codium was due to retention of functional kleptoplasts. Our results show that functional kleptoplasts from Codium can provide sacoglossan sea slugs with fitness advantages through photosynthesis.

Effect of feeding silkworm on growth performance and feed efficiency of snakehead (Channa striata)

Science.gov (United States)

Firmani, U.; Lono

2018-04-01

The snakehead, Chana striata is a carnivorous freshwater fish and widely distributed in Asia. High demand of this fish has been triggering many aquaculturist to culture C. stiata. Feed was the important factor for fish growth. Silkworm has high protein content, low fat and can be used as natural feed for finfish. This study investigate the silkworm feed in C. striata. The treatment of this research were A (100 % pellet); B (100 % silkworm); C (combination of 75 % pellet and 25 % silkworm); D (combination of 50 % pellet and 50 % silkworm); and E (combination of 25 % pellet and 75 % silkworm). The variables measured in this study were relatif growth, specific growth rate, feed efficiency, feed conversion ratio, and survival rate. The result show that silkworm gave the high growth performance, feed efficiency and survival rate of the snakehead (Channa striata) compared with the control.

Tyrosine requirement during the rapid catch-up growth phase of recovery from severe childhood undernutrition

Science.gov (United States)

The requirement for aromatic amino acids, during the rapid catch-up in weight phase of recovery from severe childhood under nutrition (SCU) is not clearly established. As a first step, the present study aimed to estimate the tyrosine requirement of children with SCU during the catch-up growth phase ...

Multi-omics approach to study the growth efficiency and amino acid metabolism in Lactococcus lactis at various specific growth rates

Directory of Open Access Journals (Sweden)

Arike Liisa

2011-02-01

Full Text Available Abstract Background Lactococcus lactis is recognised as a safe (GRAS microorganism and has hence gained interest in numerous biotechnological approaches. As it is fastidious for several amino acids, optimization of processes which involve this organism requires a thorough understanding of its metabolic regulations during multisubstrate growth. Results Using glucose limited continuous cultivations, specific growth rate dependent metabolism of L. lactis including utilization of amino acids was studied based on extracellular metabolome, global transcriptome and proteome analysis. A new growth medium was designed with reduced amino acid concentrations to increase precision of measurements of consumption of amino acids. Consumption patterns were calculated for all 20 amino acids and measured carbon balance showed good fit of the data at all growth rates studied. It was observed that metabolism of L. lactis became more efficient with rising specific growth rate in the range 0.10 - 0.60 h-1, indicated by 30% increase in biomass yield based on glucose consumption, 50% increase in efficiency of nitrogen use for biomass synthesis, and 40% reduction in energy spilling. The latter was realized by decrease in the overall product formation and higher efficiency of incorporation of amino acids into biomass. L. lactis global transcriptome and proteome profiles showed good correlation supporting the general idea of transcription level control of bacterial metabolism, but the data indicated that substrate transport systems together with lower part of glycolysis in L. lactis were presumably under allosteric control. Conclusions The current study demonstrates advantages of the usage of strictly controlled continuous cultivation methods combined with multi-omics approach for quantitative understanding of amino acid and energy metabolism of L. lactis which is a valuable new knowledge for development of balanced growth media, gene manipulations for desired product

A rapid and efficient in vitro regeneration system for lettuce (Lactuca sativa L.).

Science.gov (United States)

Armas, Isabel; Pogrebnyak, Natalia; Raskin, Ilya

2017-01-01

Successful biotechnological improvement of crop plants requires a reliable and efficient in vitro regeneration system. Lettuce ( Lactuca sativa L.), one the most important vegetable crops worldwide, is strongly genotype-dependent in terms of regeneration capacity, limiting the potential for biotechnological improvement of cultivars which show recalcitrance under currently available protocols. The effect of different nutrient sources, plant hormone combinations and activated charcoal supplementation on shoot induction efficiency was evaluated on the cultivar 'RSL NFR', which had previously shown poor regeneration efficiency. Multiple shoot organogenesis from cotyledon explants was recorded at the highest frequency and speed on Murashige and Skoog regeneration medium supplemented with 200 mg/l of activated charcoal, 3% sucrose, 10 mg/l benzylaminopurine and 0.5 mg/l naphthaleneacetic acid, which induced shoots through direct regeneration in 90.8 ± 7.9% of explants. High shoot induction efficiency was also observed, albeit not quantified, when using this medium on some other cultivars. This activated charcoal-containing regeneration medium might offer a rapid and efficient option for direct shoot induction in some lettuce genotypes that do not respond well to common lettuce regeneration protocols. This is also the first report of the effect of activated charcoal in lettuce tissue culture.

India's economic growth and energy consumption: scope for efficiency and conservation

International Nuclear Information System (INIS)

Yadav, S.S.

2000-01-01

Like all developing countries in general, India has very low per capita consumption of energy. But the consumption pattern per unit of economic output is high. There is a need to make efforts and evolve mechanism so that energy consumption growth rate decelerates while the desired economic growth takes place. In case of India, large imports of petroleum products impact very adversely on trade balance and consequently on economic growth itself. This paper enumerates various ways - legal, financial and technological - that should be adopted to increase energy efficiency and conservation effort. No single method or tool in isolation may be effective but an integrated approach involving several tools and mechanisms is sure to yield desired results. (author)

Electromagnetic induction heating for single crystal graphene growth: morphology control by rapid heating and quenching

Science.gov (United States)

Wu, Chaoxing; Li, Fushan; Chen, Wei; Veeramalai, Chandrasekar Perumal; Ooi, Poh Choon; Guo, Tailiang

2015-03-01

The direct observation of single crystal graphene growth and its shape evolution is of fundamental importance to the understanding of graphene growth physicochemical mechanisms and the achievement of wafer-scale single crystalline graphene. Here we demonstrate the controlled formation of single crystal graphene with varying shapes, and directly observe the shape evolution of single crystal graphene by developing a localized-heating and rapid-quenching chemical vapor deposition (CVD) system based on electromagnetic induction heating. Importantly, rational control of circular, hexagonal, and dendritic single crystalline graphene domains can be readily obtained for the first time by changing the growth condition. Systematic studies suggest that the graphene nucleation only occurs during the initial stage, while the domain density is independent of the growth temperatures due to the surface-limiting effect. In addition, the direct observation of graphene domain shape evolution is employed for the identification of competing growth mechanisms including diffusion-limited, attachment-limited, and detachment-limited processes. Our study not only provides a novel method for morphology-controlled graphene synthesis, but also offers fundamental insights into the kinetics of single crystal graphene growth.

Temperature influences on growth of aquatic organisms

International Nuclear Information System (INIS)

Coutant, C.C.; Suffern, J.S.

1977-01-01

Temperature profoundly affects the growth rates of aquatic organisms, and its control is essential for effective aquaculture. Characteristically, both low and high temperatures produce slow growth rates and inefficient food conversion, while intermediate temperature ranges provide rapid growth and efficient food conversion. Distinct, species-specific optimum temperatures and upper and lower temperatures of zero growth can often be defined. Thermal effects can be greatly modified by amounts and quality of food. These data not only provide the basis for criteria which maintain growth of wild organisms but also for effectively using waste heat to create optimal conditions of temperature and food ration for growing aquatic organisms commercially

Effect of temperature, salinity, and food availability on the growth and food-conversion efficiency of postlarval pinfish

International Nuclear Information System (INIS)

Peters, D.S.; Boyd, M.T.; DeVane, J.C. Jr.

1976-01-01

Growth rate, feeding rate, and food-conversion efficiency of postlarval pinfish, Lagodon rhomboides, were measured under various combinations of temperature, salinity, and food availability. Data were analyzed by multiple regression and presented as response surfaces. Temperature accounted for most of the variation in maximum feeding rate. Temperature and feeding rate accounted for over 90 percent of the observed variation in growth rate. Salinity effects were more important in predicting growth efficiency than in predicting growth rate. Because a feeding--temperature interaction affects growth and because the effect of thermal effluents on food availability is unknown, it is impossible at this time to predict whether thermal alteration of the environment would increase or decrease growth of pinfish

Rapid solidification growth mode transitions in Al-Si alloys by dynamic transmission electron microscopy

International Nuclear Information System (INIS)

Roehling, John D.; Coughlin, Daniel R.; Gibbs, John W.; Baldwin, J. Kevin; Mertens, James C.E.; Campbell, Geoffrey H.; Clarke, Amy J.; McKeown, Joseph T.

2017-01-01

In situ dynamic transmission electron microscope (DTEM) imaging of Al-Si thin-film alloys was performed to investigate rapid solidification behavior. Solidification of alloys with compositions from 1 to 15 atomic percent Si was imaged during pulsed laser melting and subsequent solidification. Solely α-Al solidification was observed in Al-1Si and Al-3Si alloys, and solely kinetically modified eutectic growth was observed in Al-6Si and Al-9Si alloys. A transition in the solidification mode in eutectic and hypereutectic alloys (Al-12Si and Al-15Si) from nucleated α-Al dendrites at lower solidification velocities to planar eutectic growth at higher solidification velocities was observed, departing from trends previously seen in laser-track melting experiments. Comparisons of the growth modes and corresponding velocities are compared with previous solidification models, and implications regarding the models are discussed.

Effect of growth conditions on the photovoltaic efficiency of poly(terthiophene) based photoelectrochemical cells

International Nuclear Information System (INIS)

Tsekouras, George; Too, Chee O.; Wallace, Gordon G.

2005-01-01

Conditions associated with the electrochemical growth of poly(terthiophene) (PTTh) were shown to have a considerable effect on photovoltaic (PV) performance indicators, namely, short-circuit-current (I sc ), open-circuit-voltage (V oc ), fill-factor (FF) and power-conversion-efficiency (PCE). The solvent and electrochemical technique used during growth were found to have an effect on PV performance. Increasing the upper potential limit associated with growth by cyclic voltammetry (CV) was found to decrease PV efficiency. The use of higher temperatures during growth was found to improve PV performance. Conditions associated with the electrochemical growth of PTTh were found to affect PV performance because of resultant changes to the polymer morphology. Such changes were characterised using scanning electron microscopy (SEM). In general, PTTh morphologies that exhibited increased porosity gave better PV performance by increasing the contact area between the PTTh and the liquid electrolyte. Combining the optimum conditions for the electrochemical growth of PTTh yielded a photoelectrochemical cell (PEC) showing I sc = 888 μA cm -2 , V oc 152 mV, FF = 37.3% and PCE = 0.101% under halogen light (solar simulated) intensity of 500 W m -2

Safety dose of three commercially used growth promoters: nuricell- aqua, hepaprotect-aqua and rapid-grow on growth and survival of Thai pangas (Pangasianodon hypophthalmus

Directory of Open Access Journals (Sweden)

Md. Ariful Islam

2014-02-01

Full Text Available Objective: To optimize the dose of 3 commonly used growth promoters, viz., Nuricell-Aqua (composition: glucomannan complex and mannose polymer, Hepaprotect-Aqua (composition: β-glucan, mannose polymer and essential oil and Rapid-Grow (composition: organic acid and their salt, β-glucan, mannose oligosaccharide and essential oil, using Thai pangas (Pangasiandon hypophthalmus as cultured species. Methods: Thai pangas fingerlings with an average length and weight of 11 cm and 10 g were reared under laboratory condition and growth promoters were fed after incorporating them with a test diet at a ratio of 10% of their body weight for a period of 28 d. Estimation of data on growth such as weight gain (g, specific growth rate, survivability (% test in each aquarium were conducted and data were analyzed using statistical software. Results: After 28 d of feeding with Nutricell-Aqua, 10 mg/(20 g feed·day, which was the dose recommended by the manufacturer, was found better. When Hepaprotect-Aqua and Rapid-Grow were employed, performance was found to be better with the dose of 60 mg/(20 g feed·day which was 1.5 times higher than the dose recommended by the corresponding manufacturer. Conclusions: These results suggest that chemicals and feed additives marketed in Bangladesh Fish Feed Market need further testing under Bangladesh climatic condition before being marketed.

Driving forces of rapid CO2 emissions growth: A case of Korea

International Nuclear Information System (INIS)

Kim, Yong-Gun; Yoo, Jonghyun; Oh, Wankeun

2015-01-01

This study aims to investigate Korea's final demand structure and its impacts on CO 2 emissions in order to reduce CO 2 emissions and develop environmental policy directions. Based on the environmentally extended input–output model, this study adopts a two-step approach: (1) to estimate the embodied emissions and their intensities for 393 sectors induced by final demand; and (2) to calculate the driving factors of emission growth between 2003 and 2011 and then evaluate the result by using Structural Decomposition Analysis (SDA). The findings of this study demonstrate that the impact of composition change in export with less embodied emission intensities tends to offset the increase in CO 2 emission by the export scale growth. The relatively low residential electricity price has resulted in the rapid growth of household electricity consumption and significantly contributed to emissions growth. The result of SDA indicates that Korea's final demand behavior yielded high carbonization over the same period. The findings suggest that Korean government should promote exports in industries with less embedded CO 2 in order to protect environments. In addition, emission information of each product and service should be provided for consumers to change their purchase patterns towards contributing to low carbon emissions as active players. -- Highlights: •We investigate Korea's final demand structure and its contribution to CO 2 emissions. •Using SDA, we evaluate the driving factors of emission growth from 2003 to 2011. •Exports play a critical role in Korea's CO 2 emissions growth. •The relatively low residential electricity price has contributed to emission growth. •Korea's final demand behavior yielded high carbonization over the same period

Resource use efficiency, ecological intensification and sustainability of intercropping systems

NARCIS (Netherlands)

Mao, L.; Zhang, L.; Zhang, S.; Evers, J.B.; Werf, van der W.; Wang, J.; Sun, H.; Su, Z.; Spiertz, J.H.J.

2015-01-01

The rapidly growing demand for food, feed and fuel requires further improvements of land and water management, crop productivity and resource-use efficiencies. Combined field experimentation and crop growth modelling during the past five decades made a great leap forward in the understanding of

Rapid and Controlled In Situ Growth of Noble Metal Nanostructures within Halloysite Clay Nanotubes.

Science.gov (United States)

Rostamzadeh, Taha; Islam Khan, Md Shahidul; Riche', Kyle; Lvov, Yuri M; Stavitskaya, Anna V; Wiley, John B

2017-11-14

A rapid (≤2 min) and high-yield low-temperature synthesis has been developed for the in situ growth of gold nanoparticles (NPs) with controlled sizes in the interior of halloysite nanotubes (HNTs). A combination of HAuCl 4 in ethanol/toluene, oleic acid, and oleylamine surfactants and ascorbic acid reducing agent with mild heating (55 °C) readily lead to the growth of targeted nanostructures. The sizes of Au NPs are tuned mainly by adjusting nucleation and growth rates. Further modification of the process, through an increase in ascorbic acid, allows for the formation of nanorods (NRs)/nanowires within the HNTs. This approach is not limited to gold-a modified version of this synthetic strategy can also be applied to the formation of Ag NPs and NRs within the clay nanotubes. The ability to readily grow such core-shell nanosystems is important to their further development as nanoreactors and active catalysts. NPs within the tube interior can further be manipulated by the electron beam. Growth of Au and Ag could be achieved under a converged electron beam suggesting that both Au@HNT and Ag@HNT systems can be used for the fundamental studies of NP growth/attachment.

Efficient production of human acidic fibroblast growth factor in pea (Pisum sativum L.) plants by agroinfection of germinated seeds

Science.gov (United States)

2011-01-01

Background For efficient and large scale production of recombinant proteins in plants transient expression by agroinfection has a number of advantages over stable transformation. Simple manipulation, rapid analysis and high expression efficiency are possible. In pea, Pisum sativum, a Virus Induced Gene Silencing System using the pea early browning virus has been converted into an efficient agroinfection system by converting the two RNA genomes of the virus into binary expression vectors for Agrobacterium transformation. Results By vacuum infiltration (0.08 Mpa, 1 min) of germinating pea seeds with 2-3 cm roots with Agrobacteria carrying the binary vectors, expression of the gene for Green Fluorescent Protein as marker and the gene for the human acidic fibroblast growth factor (aFGF) was obtained in 80% of the infiltrated developing seedlings. Maximal production of the recombinant proteins was achieved 12-15 days after infiltration. Conclusions Compared to the leaf injection method vacuum infiltration of germinated seeds is highly efficient allowing large scale production of plants transiently expressing recombinant proteins. The production cycle of plants for harvesting the recombinant protein was shortened from 30 days for leaf injection to 15 days by applying vacuum infiltration. The synthesized aFGF was purified by heparin-affinity chromatography and its mitogenic activity on NIH 3T3 cells confirmed to be similar to a commercial product. PMID:21548923

A rapid and efficient branched DNA hybridization assay to titer lentiviral vectors.

Science.gov (United States)

Nair, Ayyappan; Xie, Jinger; Joshi, Sarasijam; Harden, Paul; Davies, Joan; Hermiston, Terry

2008-11-01

A robust assay to titer lentiviral vectors is imperative to qualifying their use in drug discovery, target validation and clinical applications. In this study, a novel branched DNA based hybridization assay was developed to titer lentiviral vectors by quantifying viral RNA genome copy numbers from viral lysates without having to purify viral RNA, and this approach was compared with other non-functional (p24 protein ELISA and viral RT-qPCR) and a functional method (reporter gene expression) used commonly. The RT-qPCR method requires purification of viral RNA and the accuracy of titration therefore depends on the efficiency of purification; this requirement is ameliorated in the hybridization assay as RNA is measured directly in viral lysates. The present study indicates that the hybridization based titration assay performed on viral lysates was more accurate and has additional advantages of being rapid, robust and not dependent on transduction efficiency in different cell types.

Growth, development, and nutritional physiology of grasshoppers from subarctic and temperate regions.

Science.gov (United States)

Fielding, Dennis J; Defoliart, Linda S

2007-01-01

Despite the importance of developmental rate, growth rate, and size at maturity in the life history of poikliotherms, the trade-offs among these traits and selection pressures involved in the evolution of these traits are not well understood. This study compared these traits in a grasshopper, Melanoplus sanguinipes F. (Orthoptera: Acrididae), from two contrasting geographical regions, subarctic Alaska and temperate Idaho. The growing season in the interior of Alaska is about 80 d shorter than at low-elevation sites in Idaho. We hypothesized that the Alaskan grasshoppers would show more rapid growth and development than grasshoppers from Idaho, at the cost of greater sensitivity to food quality. On a diet of lettuce and wheat bran, grasshoppers from Alaska developed from egg hatch to adult more rapidly than those from Idaho at each of three different temperature regimes. Averaged over all temperature treatments, the weight of the Alaskan grasshoppers was about 5% less than that of the Idaho grasshoppers at the adult molt. Feeding and digestive efficiencies were determined for the final two instars using two meridic diets: one with a high concentration of nutrients and the other with the same formulation but diluted with cellulose. Alaskan grasshoppers again developed more rapidly, weighed less, and had faster growth rates than those from Idaho. Alaskan grasshoppers supported their more rapid growth by increasing postingestive efficiencies; that is, they had higher conversion rates of digested matter to biomass on the high-quality diet, greater assimilation of food on the low-quality diet, and greater efficiency of nitrogen assimilation or retention on both diets. There was no evidence that performance of Alaskan grasshoppers suffered any more than that of the Idaho grasshoppers on the low-quality diet.

The Technical Efficiency of Earthquake Medical Rapid Response Teams Following Disasters: The Case of the 2010 Yushu Earthquake in China.

Science.gov (United States)

Liu, Xu; Tang, Bihan; Yang, Hongyang; Liu, Yuan; Xue, Chen; Zhang, Lulu

2015-12-04

Performance assessments of earthquake medical rapid response teams (EMRRTs), particularly the first responders deployed to the hardest hit areas following major earthquakes, should consider efficient and effective use of resources. This study assesses the daily technical efficiency of EMRRTs in the emergency period immediately following the 2010 Yushu earthquake in China. Data on EMRRTs were obtained from official daily reports of the general headquarters for Yushu earthquake relief, the emergency office of the National Ministry of Health, and the Health Department of Qinghai Province, for a sample of data on 15 EMRRTs over 62 days. Data envelopment analysis was used to examine the technical efficiency in a constant returns to scale model, a variable returns to scale model, and the scale efficiency of EMRRTs. Tobit regression was applied to analyze the effects of corresponding influencing factors. The average technical efficiency scores under constant returns to scale, variable returns to scale, and the scale efficiency scores of the 62 units of analysis were 77.95%, 89.00%, and 87.47%, respectively. The staff-to-bed ratio was significantly related to global technical efficiency. The date of rescue was significantly related to pure technical efficiency. The type of institution to which an EMRRT belonged and the staff-to-bed ratio were significantly related to scale efficiency. This study provides evidence that supports improvements to EMRRT efficiency and serves as a reference for earthquake emergency medical rapid assistance leaders and teams.

The Technical Efficiency of Earthquake Medical Rapid Response Teams Following Disasters: The Case of the 2010 Yushu Earthquake in China

Directory of Open Access Journals (Sweden)

Xu Liu

2015-12-01

Full Text Available Purpose: Performance assessments of earthquake medical rapid response teams (EMRRTs, particularly the first responders deployed to the hardest hit areas following major earthquakes, should consider efficient and effective use of resources. This study assesses the daily technical efficiency of EMRRTs in the emergency period immediately following the 2010 Yushu earthquake in China. Methods: Data on EMRRTs were obtained from official daily reports of the general headquarters for Yushu earthquake relief, the emergency office of the National Ministry of Health, and the Health Department of Qinghai Province, for a sample of data on 15 EMRRTs over 62 days. Data envelopment analysis was used to examine the technical efficiency in a constant returns to scale model, a variable returns to scale model, and the scale efficiency of EMRRTs. Tobit regression was applied to analyze the effects of corresponding influencing factors. Results: The average technical efficiency scores under constant returns to scale, variable returns to scale, and the scale efficiency scores of the 62 units of analysis were 77.95%, 89.00%, and 87.47%, respectively. The staff-to-bed ratio was significantly related to global technical efficiency. The date of rescue was significantly related to pure technical efficiency. The type of institution to which an EMRRT belonged and the staff-to-bed ratio were significantly related to scale efficiency. Conclusions: This study provides evidence that supports improvements to EMRRT efficiency and serves as a reference for earthquake emergency medical rapid assistance leaders and teams.

Rapid and efficient galactose fermentation by engineered Saccharomyces cerevisiae.

Science.gov (United States)

Quarterman, Josh; Skerker, Jeffrey M; Feng, Xueyang; Liu, Ian Y; Zhao, Huimin; Arkin, Adam P; Jin, Yong-Su

2016-07-10

In the important industrial yeast Saccharomyces cerevisiae, galactose metabolism requires energy production by respiration; therefore, this yeast cannot metabolize galactose under strict anaerobic conditions. While the respiratory dependence of galactose metabolism provides benefits in terms of cell growth and population stability, it is not advantageous for producing fuels and chemicals since a substantial fraction of consumed galactose is converted to carbon dioxide. In order to force S. cerevisiae to use galactose without respiration, a subunit (COX9) of a respiratory enzyme was deleted, but the resulting deletion mutant (Δcox9) was impaired in terms of galactose assimilation. Interestingly, after serial sub-cultures on galactose, the mutant evolved rapidly and was able to use galactose via fermentation only. The evolved strain (JQ-G1) produced ethanol from galactose with a 94% increase in yield and 6.9-fold improvement in specific productivity as compared to the wild-type strain. (13)C-metabolic flux analysis demonstrated a three-fold reduction in carbon flux through the TCA cycle of the evolved mutant with redirection of flux toward the fermentation pathway. Genome sequencing of the JQ-G1 strain revealed a loss of function mutation in a master negative regulator of the Leloir pathway (Gal80p). The mutation (Glu348*) in Gal80p was found to act synergistically with deletion of COX9 for efficient galactose fermentation, and thus the double deletion mutant Δcox9Δgal80 produced ethanol 2.4 times faster and with 35% higher yield than a single knockout mutant with deletion of GAL80 alone. When we introduced a functional COX9 cassette back into the JQ-G1 strain, the JQ-G1-COX9 strain showed a 33% reduction in specific galactose uptake rate and a 49% reduction in specific ethanol production rate as compared to JQ-G1. The wild-type strain was also subjected to serial sub-cultures on galactose but we failed to isolate a mutant capable of utilizing galactose without

Improving building energy efficiency in India: State-level analysis of building energy efficiency policies

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha; Tan, Qing; Evans, Meredydd; Kyle, Page; Vu, Linh; Patel, Pralit L.

2017-11-01

India is expected to add 40 billion m2 of new buildings till 2050. Buildings are responsible for one third of India’s total energy consumption today and building energy use is expected to continue growing driven by rapid income and population growth. The implementation of the Energy Conservation Building Code (ECBC) is one of the measures to improve building energy efficiency. Using the Global Change Assessment Model, this study assesses growth in the buildings sector and impacts of building energy policies in Gujarat, which would help the state adopt ECBC and expand building energy efficiency programs. Without building energy policies, building energy use in Gujarat would grow by 15 times in commercial buildings and 4 times in urban residential buildings between 2010 and 2050. ECBC improves energy efficiency in commercial buildings and could reduce building electricity use in Gujarat by 20% in 2050, compared to the no policy scenario. Having energy codes for both commercial and residential buildings could result in additional 10% savings in electricity use. To achieve these intended savings, it is critical to build capacity and institution for robust code implementation.

China urges rapid growth

International Nuclear Information System (INIS)

Hendry, S.

1993-01-01

This time last year China's paramount leader, Deng Xiaoping, launched the country on another bout of fast-paced economic growth and restructuring. After three years of riding out political and economic clampdown, foreign chemical companies were jerked awake by major changes in China's chemical industry. As the state becomes less involved with managing the economy, unleashing 12% gross national product growth, closer involvement with domestic factories has become attractive and essential. MCI officials say government funds will now be channeled toward clearing energy and transport bottlenecks, and chemical enterprises will be given more chance to turn a profit. They will be allowed to issue shares, seek foreign investment partners themselves, and bypass trading companies like China National Import-Export Corp. (Sinochem), the former state monopoly. Foreign analysts question whether China's finances and oil resources can support expansion. Even if they can, Cai estimates that ethylene imports will remain around the present level of 1 million tons. To further guarantee chemical supplies, China has invested in urea and polypropylene plants in the US and polystyrene plant in Hong Kong

Variations in land surface temperature and cooling efficiency of green space in rapid urbanization

DEFF Research Database (Denmark)

Yu, Zhaowu; Guo, Xieying; Zeng, Yuxi

2018-01-01

understood. Additionally, a strategy to optimize the most significant decreased land cover type in order to maximize the cooling effect is still lacking. Therefore, in this study, we selected the rapidly urbanizing and ‘hottest’ city in China, Fuzhou, as a case study. Two algorithms were selected to compare....... This study extends the current understanding of LCC dynamics and LST variation. The concepts of the CE and TVoE are meaningful for landscape planning practice and can be used in other cases....... and obtain reliable LST data. A land use transfer matrix was used to detect critical contributions leading to the LST variations. The concept of cooling efficiency (CE) and the threshold value of efficiency (TVoE) are also proposed, defined, and calculated. The results show that LST values increased...

Rapid and efficient synthesis of soluble graphene nanosheets using N-methyl-p-aminophenol sulfate as a reducing agent

International Nuclear Information System (INIS)

Wang Xialie; Wen Xiaohong; Liu Zhanpeng; Tan Yi; Yuan Ye; Zhang Ping

2012-01-01

Mass production of soluble graphene still remains a challenge, although several methodologies have been proposed. Here we report a rapid and efficient method for the synthesis of soluble graphene nanosheets (GNSs) with long-term dispersion stability in both aqueous and common organic solvents. Within only 12 min at 95 °C, exfoliated graphite oxide in ammonia solution (pH 10) was reduced to soluble GNSs using N-methyl-p-aminophenol sulfate (metol) as a reducing agent without external stabilizers. The prepared GNSs were characterized by different techniques and a comparison of metol and hydrazine hydrate as reducing agents was made. The results indicated that, with the advantages of being rapid, efficient, inexpensive and relatively environmentally friendly, the reduction of graphite oxide into soluble GNSs by metol is a promising substitute for hydrazine hydrate in the mass production of soluble GNSs. (paper)

China Energy Group - Sustainable Growth Through EnergyEfficiency

Energy Technology Data Exchange (ETDEWEB)

Levine, Mark; Fridley, David; Lin, Jiang; Sinton, Jonathan; Zhou,Nan; Aden, Nathaniel; Huang, Joe; Price, Lynn; McKane, Aimee T.

2006-03-20

China is fueling its phenomenal economic growth with huge quantities of coal. The environmental consequences reach far beyond its borders--China is second only to the United States in greenhouse gas emissions. Expanding its supply of other energy sources, like nuclear power and imported oil, raises trade and security issues. Soaring electricity demand necessitates the construction of 40-70 GW of new capacity per year, creating sustained financing challenges. While daunting, the challenge of meeting China's energy needs presents a wealth of opportunities, particularly in meeting demand through improved energy efficiency and other clean energy technologies. The China Energy Group at the Lawrence Berkeley National Laboratory (LBNL) is committed to understanding these opportunities, and to exploring their implications for policy and business. We work collaboratively with energy researchers, suppliers, regulators, and consumers in China and elsewhere to: better understand the dynamics of energy use in China. Our Research Focus Encompasses Three Major Areas: Buildings, Industry, and Cross-Cutting Activities. Buildings--working to promote energy-efficient buildings and energy-efficient equipment used in buildings. Current work includes promoting the design and use of minimum energy efficiency standards and energy labeling for appliances, and assisting in the development and implementation of building codes for energy-efficient residential and commercial/public buildings. Past work has included a China Residential Energy Consumption Survey and a study of the health impacts of rural household energy use. Industry--understanding China's industrial sector, responsible for the majority of energy consumption in China. Current work includes benchmarking China's major energy-consuming industries to world best practice, examining energy efficiency trends in China's steel and cement industries, implementing voluntary energy efficiency agreements in various

Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

Directory of Open Access Journals (Sweden)

Feng Tao

2012-01-01

Full Text Available The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

Industry efficiency and total factor productivity growth under resources and environmental constraint in China.

Science.gov (United States)

Tao, Feng; Li, Ling; Xia, X H

2012-01-01

The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

Science.gov (United States)

Tao, Feng; Li, Ling; Xia, X. H.

2012-01-01

The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity. PMID:23365517

Excessive Cellular Proliferation Negatively Impacts Reprogramming Efficiency of Human Fibroblasts.

Science.gov (United States)

Gupta, Manoj K; Teo, Adrian Kee Keong; Rao, Tata Nageswara; Bhatt, Shweta; Kleinridders, Andre; Shirakawa, Jun; Takatani, Tomozumi; Hu, Jiang; De Jesus, Dario F; Windmueller, Rebecca; Wagers, Amy J; Kulkarni, Rohit N

2015-10-01

The impact of somatic cell proliferation rate on induction of pluripotent stem cells remains controversial. Herein, we report that rapid proliferation of human somatic fibroblasts is detrimental to reprogramming efficiency when reprogrammed using a lentiviral vector expressing OCT4, SOX2, KLF4, and cMYC in insulin-rich defined medium. Human fibroblasts grown in this medium showed higher proliferation, enhanced expression of insulin signaling and cell cycle genes, and a switch from glycolytic to oxidative phosphorylation metabolism, but they displayed poor reprogramming efficiency compared with cells grown in normal medium. Thus, in contrast to previous studies, our work reveals an inverse correlation between the proliferation rate of somatic cells and reprogramming efficiency, and also suggests that upregulation of proteins in the growth factor signaling pathway limits the ability to induce pluripotency in human somatic fibroblasts. The efficiency with which human cells can be reprogrammed is of interest to stem cell biology. In this study, human fibroblasts cultured in media containing different concentrations of growth factors such as insulin and insulin-like growth factor-1 exhibited variable abilities to proliferate, with consequences on pluripotency. This occurred in part because of changes in the expression of proteins involved in the growth factor signaling pathway, glycolysis, and oxidative phosphorylation. These findings have implications for efficient reprogramming of human cells. ©AlphaMed Press.

Catch-up growth following fetal growth restriction promotes rapid restoration of fat mass but without metabolic consequences at one year of age.

Directory of Open Access Journals (Sweden)

Jacques Beltrand

Full Text Available BACKGROUND: Fetal growth restriction (FGR followed by rapid weight gain during early life has been suggested to be the initial sequence promoting central adiposity and insulin resistance. However, the link between fetal and early postnatal growth and the associated anthropometric and metabolic changes have been poorly studied. METHODOLOGY/PRINCIPAL FINDINGS: Over the first year of post-natal life, changes in body mass index, skinfold thickness and hormonal concentrations were prospectively monitored in 94 infants in whom the fetal growth velocity had previously been measured using a repeated standardized procedure of ultrasound fetal measurements. 45 infants, thinner at birth, had experienced previous FGR (FGR+ regardless of birth weight. Growth pattern in the first four months of life was characterized by greater change in BMI z-score in FGR+ (+1.26+/-1.2 vs +0.58 +/-1.17 SD in FGR- resulting in the restoration of BMI and of fat mass to values similar to FGR-, independently of caloric intakes. Growth velocity after 4 months was similar and BMI z-score and fat mass remained similar at 12 months of age. At both time-points, fetal growth velocity was an independent predictor of fat mass in FGR+. At one year, fasting insulin levels were not different but leptin was significantly higher in the FGR+ (4.43+/-1.41 vs 2.63+/-1 ng/ml in FGR-. CONCLUSION: Early catch-up growth is related to the fetal growth pattern itself, irrespective of birth weight, and is associated with higher insulin sensitivity and lower leptin levels after birth. Catch-up growth promotes the restoration of body size and fat stores without detrimental consequences at one year of age on body composition or metabolic profile. The higher leptin concentration at one year may reflect a positive energy balance in children who previously faced fetal growth restriction.

Rapid Inspection of Aerospace Structures - Is It Autonomous Yet?

Science.gov (United States)

Bar-Cohen, Yoseph; Backes, Paul; Joffe, Benjamin

1996-01-01

The trend to increase the usage of aging aircraft added a great deal of urgency to the ongoing need for low-cost, rapid, simple-to-operate, reliable and efficient NDE methods for detection and characterization of flaws in aircraft structures. In many cases, the problem of inspection is complex due to the limitation of current technology and the need to disassemble aircraft structures and testing them in lab conditions. To overcome these limitations, reliable field inspection tools are being developed for rapid NDE of large and complex-shape structures, that can operate at harsh, hostal and remote conditions with minimum human interface. In recent years, to address the need for rapid inspection in field conditions, numerous portable scanners were developed using NDE methods, including ultrasonics, shearography, thermography. This paper is written with emphasis on ultrasonic NDE scanners, their evolution and the expected direction of growth.

Bacterial growth efficiency in the tropical estuarine and coastal waters of Goa, southwest coast of India

Digital Repository Service at National Institute of Oceanography (India)

Ram, A.; Nair, S.; Chandramohan, D.

overview. Mar Ecol Prog Ser 43:1-10 8. Del Giorgio PA, Cole 11 (1998) Bacterial growth efficiency in natural aquatic ecosystems. Annu Rev Ecol Syst 29:503 541 9. Del Giorgio PA, Cole n (2000) Bacterial energetics and growth efficiency. In: DL Kirchman (ed...) Microbial Ecology of the Oceans. Wiley-Liss, New York pp289~325 10. Del Giorgio PA, Gasol JM, Mura P, Vaque D, Duarte CM (1996) Protozoan control of the proportion of metabolically active bacteria in coastal marine plankton. Limnol Oceanogr 41:1169-1179 11...

Cotton growth potassium deficiency stress is influenced by photosynthetic apparatus and root system

International Nuclear Information System (INIS)

Hussain, Z.U.; Arshad, M.

2010-01-01

Due to rapid depletion of soil potassium (K) and increasing cost of K fertilizers in Pakistan, the K-use efficient crop genotypes become very important for agricultural sustain ability. However, limited research has been done on this important issue particularly in cotton, an important fibre crop. We studied the growth and biomass production of three cotton genotypes (CIM-506, NIAB- 78 and NIBGE-2) different in K-use efficiency in a K-deficient solution culture. Genotypes differed significantly for biomass production, absolute growth rates (shoot, root, leaf, total), leaf area, mean leaf area and relative growth rate of leaf under K deficiency stress, besides specific leaf area. The relative growth rate (shoot, root, total) did not differ significantly, except for leaf. For all these characters, NIBGE-2 was the best performer followed by NIAB-78 and CIM-506. Shoot dry weight was significantly related with (in decreasing order of significance): mean leaf area, leaf dry weight, leaf area, root dry weight, absolute growth rate of shoot, absolute growth rate of root, absolute growth rate total, absolute growth rate root, relative growth rate leaf, relative growth rate total and relative growth rate shoot. Hence, the enhanced biomass accumulation of cotton genotypes under K deficiency stress is related to their efficient photosynthetic apparatus and root system, appeared to be the most important morphological markers while breeding for K-use efficient cotton genotypes.(author)

Texture control and growth mechanism of WSe{sub 2} film prepared by rapid selenization of W film

Energy Technology Data Exchange (ETDEWEB)

Li, Hongchao [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Chongyi Zhangyuan Tungsten Industry Corporation Limited, Ganzhou 341300 (China); Gao, Di; Li, Kun; Pang, Mengde; Xie, Senlin [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Liu, Rutie, E-mail: llrrtt@csu.edu.cn [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Zou, Jianpeng [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China)

2017-02-01

Highlights: • We present a highly efficient method for preparing WSe{sub 2} film by rapid selenization. • The W film phase composition has little effect on WSe{sub 2} film orientation. • W film density is a critical factor that influences the WSe{sub 2} orientation. • A growth model was proposed for two kinds of WSe{sub 2} film textures. - Abstract: The tungsten diselenide (WSe{sub 2}) films with different orientation present unique properties suitable for specific applications, such as WSe{sub 2} with a C-axis⊥substrate for optoelectronics and WSe{sub 2} with a C-axis // substrate for electrocatalysts. Orientation control of WSe{sub 2} is essential for realizing the practical applications. In this letter, a WSe{sub 2} film has been prepared via rapid selenization of a magnetron-sputtered tungsten (W) film. The influence of the magnetron-sputtered W film on WSe{sub 2} film growth was studied systematically. Scanning electron microscopy, X-ray diffractometry and high-resolution transmission electron microscopy were used to evaluate the morphology, microstructure and phase composition of the W and WSe{sub 2} films. The substrate temperature has a significant effect on the W film phase composition, but little effect on the WSe{sub 2} film orientation. The WSe{sub 2} orientation can be controlled by changing the W film microstructure. A dense W film that is deposited at low pressure is conducive to the formation of WSe{sub 2} with a C-axis⊥substrate, whereas a porous W film deposited at high pressure favors the formation of WSe{sub 2} with a C-axis // substrate. A growth model for the WSe{sub 2} film with different texture has been proposed based on the experimental results. The direction of selenium (Se) vapor diffusion differs at the top and side surfaces. This is a key factor for the preparation of anisotropic WSe{sub 2} films. Highly oriented WSe{sub 2} films with a C-axis⊥substrate grow from the dense W film deposited at low pressure because Se vapor

Polygenic risk, rapid childhood growth, and the development of obesity: evidence from a 4-decade longitudinal study.

Science.gov (United States)

Belsky, Daniel W; Moffitt, Terrie E; Houts, Renate; Bennett, Gary G; Biddle, Andrea K; Blumenthal, James A; Evans, James P; Harrington, Honalee; Sugden, Karen; Williams, Benjamin; Poulton, Richie; Caspi, Avshalom

2012-06-01

To test how genomic loci identified in genome-wide association studies influence the development of obesity. A 38-year prospective longitudinal study of a representative birth cohort. The Dunedin Multidisciplinary Health and Development Study, Dunedin, New Zealand. One thousand thirty-seven male and female study members. We assessed genetic risk with a multilocus genetic risk score. The genetic risk score was composed of single-nucleotide polymorphisms identified in genome-wide association studies of obesity-related phenotypes. We assessed family history from parent body mass index data collected when study members were 11 years of age. Body mass index growth curves, developmental phenotypes of obesity, and adult obesity outcomes were defined from anthropometric assessments at birth and at 12 subsequent in-person interviews through 38 years of age. Individuals with higher genetic risk scores were more likely to be chronically obese in adulthood. Genetic risk first manifested as rapid growth during early childhood. Genetic risk was unrelated to birth weight. After birth, children at higher genetic risk gained weight more rapidly and reached adiposity rebound earlier and at a higher body mass index. In turn, these developmental phenotypes predicted adult obesity, mediating about half the genetic effect on adult obesity risk. Genetic associations with growth and obesity risk were independent of family history, indicating that the genetic risk score could provide novel information to clinicians. Genetic variation linked with obesity risk operates, in part, through accelerating growth in the early childhood years after birth. Etiological research and prevention strategies should target early childhood to address the obesity epidemic.

Efficiency of a clinical prediction model for selective rapid testing in children with pharyngitis: A prospective, multicenter study

NARCIS (Netherlands)

Cohen, Jérémie F.; Cohen, Robert; Bidet, Philippe; Elbez, Annie; Levy, Corinne; Bossuyt, Patrick M.; Chalumeau, Martin

2017-01-01

There is controversy whether physicians can rely on signs and symptoms to select children with pharyngitis who should undergo a rapid antigen detection test (RADT) for group A streptococcus (GAS). Our objective was to evaluate the efficiency of signs and symptoms in selectively testing children with

Growth and structure of rapid thermal silicon oxides and nitroxides studied by spectroellipsometry and Auger electron spectroscopy

Science.gov (United States)

Gonon, N.; Gagnaire, A.; Barbier, D.; Glachant, A.

1994-11-01

Rapid thermal oxidation of Czochralski-grown silicon in either O2 or N2O atmospheres have been studied using spectroellipsometry and Auger electron spectroscopy. Multiwavelength ellipsometric data were processed in order to separately derive the thickness and refractive indexes of rapid thermal dielectrics. Results revealed a significant increase of the mean refractive index as the film thickness falls below 20 nm for both O2 or N2O oxidant species. A multilayer structure including an about 0.3-nm-thick interfacial region of either SiO(x) or nitroxide in the case of O2 and N2O growth, respectively, followed by a densified SiO2 layer, was found to accurately fit the experimental data. The interfacial region together with the densified state of SiO2 close to the interface suggest a dielectric structure in agreement with the continuous random network model proposed for classical thermal oxides. Auger electron spectroscopy analysis confirmed the presence of noncrystalline Si-Si bonds in the interfacial region, mostly in the case of thin oxides grown in O2. It was speculated that the initial fast growth regime was due to a transient oxygen supersaturation in the interfacial region. Besides, the self-limiting growth in N2O was confirmed and explained in agreement with several recently published data, by the early formation of a very thin nitride or oxynitride membrane in the highly densified oxide beneath the interface. The beneficial effect of direct nitrogen incorporation by rapid thermal oxidation in N2O instead of O2 for the electrical behavior of metal-oxide-semiconductor capacitors is likely a better SiO2/Si lattice accommodation through the reduction of stresses and Si-Si bonds in the interfacial region of the dielectric.

Growth in Rapid Automatized Naming from Grades K to 8 in Children with Math or Reading Disabilities

Science.gov (United States)

Mazzocco, Michèle M. M.; Grimm, Kevin J.

2013-01-01

Rapid automatized naming (RAN) is widely used to identify reading disabilities (RD) and has recently been considered a potential predictor of risk for mathematics learning disabilities (MLD). Here we longitudinally examine RAN performance from Grades K to 8, to view how growth on RAN response time differs for children with RD versus MLD. Across…

Research on water hammer forces caused by rapid growth of bubbles at severe accidents of water cooled reactors

International Nuclear Information System (INIS)

Inasaka, Fujio; Adachi, Masaki; Aya, Izuo

2004-01-01

At severe accidents of Water Cooled Reactors a great deal of gas is expected to be produced in a short time within the water of lower part of nuclear pressure vessel and containment vessel caused by hydrogen production with a metal water reaction and steam explosions with direct contact of melting core and water. Water hammer forces caused by rapid growth of bubbles shall work on the wall of containment vessel and affect its integrity. Coherency of water block movement is not clear, whether simultaneous or in the same direction. Water block behavior and water hammer forces caused by rapid growth of bubbles have been tested using a modified scale model and analyzed to obtain experimental correlated equation to estimate water block's rising distance and velocity from water hammer data. Numerical analysis using RELAP5-3D (Reactor Excursion and Leak Analysis Program) has been conducted to evaluate water hammer forces and makes clear its modifications needed. (T. Tanaka)

A simple and highly efficient Agrobacterium-mediated transformation protocol for Setaria viridis

Directory of Open Access Journals (Sweden)

Polyana Kelly Martins

2015-06-01

Full Text Available The production and use of sugarcane in Brazil is very important for bioenergy production and is recognized as one of the most efficient in the world. In our laboratory, Setaria viridis is being tested as a model plant for sugarcane. S. viridis has biological attributes (rapid life cycle, small genome, diploid, short stature and simple growth requirements that make it suitable for use as a model system. We report a highly efficient protocol for Agrobacterium-mediated genetic transformation of S. viridis. The optimization of several steps in tissue culture allowed the rapid regeneration of plants and increased the rate of transformation up to 29%. This protocol could become a powerful tool for functional genomics in sugarcane.

To live fast or not: growth, vigor and longevity of old-growth ponderosa pine and lodgepole pine trees

Energy Technology Data Exchange (ETDEWEB)

Kaufmann, M. R. [Forest Service, Fort Collins, CO (United States). Rocky Mountain Forest and Range Experiment Station

1996-01-01

Old ponderosa pine and lodgepole pine trees were studied to determine volume growth patterns in relation to leaf area. Ponderosa pine trees varied in age from 166 to 432 years and were about 77 inches in diameter; lodgepole pine trees ranged in age from 250 to 296 years and were 31 inches in diameter. Trees of both species had flat tops, heavy branches and foliage distribution characteristic of older trees. Annual volume increments were determined from crossdated radial increments measured on discs at four meter height intervals; leaf areas were determined based on leaf area/branch sapwood area ratios. Ponderosa pine volume growth was found to have been gradual at first, reaching a plateau that persisted for a century or more, followed by a rapid increase, and a sudden decrease in growth to less than one half of the earlier rate and persisting at these levels for several decades. In lodgepole pine growth decline was less frequent and less spectacular; growth in general was more even, with slight annual variations. Volume growth in the most recent years prior to felling weakly correlated with leaf area. Growth efficiencies were generally higher for trees having the lowest leaf areas. The fact that these persisted for many decades with low growth efficiencies suggests that defence mechanisms are more effective in old trees than in younger ones. 16 refs., 8 figs.

Effects of epidermal growth factor, transferrin, and insulin on lipofection efficiency in human lung carcinoma cells.

Science.gov (United States)

Yanagihara, K; Cheng, H; Cheng, P W

2000-01-01

Poor transfection efficiency is the major drawback of lipofection. We showed previously that addition of transferrin (TF) to Lipofectin enhanced the expression of a reporter gene in HeLa cells by 120-fold and achieved close to 100% transfection efficiency. The purpose of this study was to determine whether TF and other ligands could improve the efficiency of lipofection in lung carcinoma cells. Confluent A549, Calu3, and H292 cells were transfected for 18 hours with a plasmid DNA (pCMVlacZ) using Lipofectin plus TF, insulin, or epidermal growth factor as the vector. The transfected cells were assessed for transfection efficiency by beta-galactosidase activity (light units/microg protein) and the percentage of blue cells following 5-bromo-4-chloro-3-indolyl beta-D-galactopyranoside staining. Lipofectin supplemented with epidermal growth factor yielded the largest enhancement of lipofection efficiency (lipofection efficiency in A549 and Calu3 cells but not in H292 cells, whereas TF showed significant lipofection efficiency-enhancing effect in Calu3 and H292 cells but not in A549 cells. The transfection efficiency correlated well with the amounts of DNA delivered to the nucleus as well as the amounts of the receptor. These results indicate that the gene delivery strategy employing ligand-facilitated lipofection can achieve high transfection efficiency in human lung carcinoma cells. In addition, enhancement of the expression of the receptor may be a possible strategy for increasing the efficiency of gene targeting.

A Rapid and Efficient Sonogashira Protocol and Improved Synthesis of Free Fatty Acid 1 (FFA1) Receptor Agonists

DEFF Research Database (Denmark)

Christiansen, Elisabeth; Due-Hansen, Maria E; Ulven, Trond

2010-01-01

A protocol for rapid and efficient Pd/Cu-catalyzed coupling of aryl bromides and iodides to terminal alkynes has been developed with use of 2-(di-tert-butylphosphino)-N-phenylindole (cataCXium PIntB) as ligand in TMEDA and water. The new protocol successfully couples substrates which failed...

Indicators for industrial energy efficiency in India

International Nuclear Information System (INIS)

Gielen, Dolf; Taylor, Peter

2009-01-01

India accounts for 4.5% of industrial energy use worldwide. This share is projected to increase as the economy expands rapidly. The level of industrial energy efficiency in India varies widely. Certain sectors, such as cement, are relatively efficient, while others, such as pulp and paper, are relatively inefficient. Future energy efficiency efforts should focus on direct reduced iron, pulp and paper and small-scale cement kilns because the potentials for improvement are important in both percentage and absolute terms. Under business as usual, industrial energy use is projected to rise faster than total final energy use. A strong focus on energy efficiency can reduce this growth, but CO 2 emissions will still rise substantially. If more substantial CO 2 emissions reductions are to be achieved then energy efficiency will need to be combined with measures that reduce the carbon intensity of the industrial fuel mix.

Rapid, efficient and selective preconcentration of benzo[a]pyrene (BaP) by molecularly imprinted composite cartridge and HPLC

Energy Technology Data Exchange (ETDEWEB)

Çorman, Mehmet Emin, E-mail: mecorman@sinop.edu.tr [Hacettepe University, Department of Chemistry, Ankara (Turkey); Sinop University, Department of Bioengineering, Sinop (Turkey); Armutcu, Canan [Hacettepe University, Department of Chemistry, Ankara (Turkey); Uzun, Lokman, E-mail: lokman@hacettepe.edu.tr [Hacettepe University, Department of Chemistry, Ankara (Turkey); Denizli, Adil [Hacettepe University, Department of Chemistry, Ankara (Turkey)

2017-01-01

In this study, cryogel-based molecularly imprinted composite cartridges were designed for the rapid, efficient, and selective preconcentration of benzo[a]pyrene (BaP) from water samples. First, a BaP-imprinted poly(2-hydroxyethyl methacrylate-N-methacryloyl-(L)-phenylalanine) composite cartridge was synthesized under semi-frozen conditions and characterized by scanning electron microscopy, elemental analysis, Fourier transform infrared spectroscopy, and swelling tests. After the optimization of preconcentration parameters, i.e., pH and initial BaP concentration, the selectivity and preconcentration efficiency, and reusability of these cartridges were also evaluated. In selectivity experiments, BaP imprinted composite cartridge exhibited binding capacities 3.09, 9.52, 8.87, and 8.77-fold higher than that of the non-imprinted composite cartridge in the presence of competitors, such as benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), indeno[1,2,3-cd]pyrene (IcdP), and 1-naphthol, respectively. The method detection limit (MDL), relative standard deviation (RSD) and preconcentration efficiency (PE) of the synthesized composite cartridge were calculated as 24.86 μg/L, 1.60%, and 349.6%, respectively. - Highlights: • Cryogel based molecularly imprinted composite cartridges as solid-phase extraction sorbents • Combination unique structural features of cryogels with MIP • An excellent ability to recognize the BaP molecule even if single-run contact • Rapid, efficient, selective and cost-friendly PAH preconcentration • Hydrophobic interactions via N-methacryloyl-(L)-phenylalanine.

Adapting RRT growth for heterogeneous environments

KAUST Repository

Denny, Jory; Morales, Marco; Rodriguez, Samuel; Amato, Nancy M.

2013-01-01

Rapidly-exploring Random Trees (RRTs) are effective for a wide range of applications ranging from kinodynamic planning to motion planning under uncertainty. However, RRTs are not as efficient when exploring heterogeneous environments and do not adapt to the space. For example, in difficult areas an expensive RRT growth method might be appropriate, while in open areas inexpensive growth methods should be chosen. In this paper, we present a novel algorithm, Adaptive RRT, that adapts RRT growth to the current exploration area using a two level growth selection mechanism. At the first level, we select groups of expansion methods according to the visibility of the node being expanded. Second, we use a cost-sensitive learning approach to select a sampler from the group of expansion methods chosen. Also, we propose a novel definition of visibility for RRT nodes which can be computed in an online manner and used by Adaptive RRT to select an appropriate expansion method. We present the algorithm and experimental analysis on a broad range of problems showing not only its adaptability, but efficiency gains achieved by adapting exploration methods appropriately. © 2013 IEEE.

Adapting RRT growth for heterogeneous environments

KAUST Repository

Denny, Jory

2013-11-01

Rapidly-exploring Random Trees (RRTs) are effective for a wide range of applications ranging from kinodynamic planning to motion planning under uncertainty. However, RRTs are not as efficient when exploring heterogeneous environments and do not adapt to the space. For example, in difficult areas an expensive RRT growth method might be appropriate, while in open areas inexpensive growth methods should be chosen. In this paper, we present a novel algorithm, Adaptive RRT, that adapts RRT growth to the current exploration area using a two level growth selection mechanism. At the first level, we select groups of expansion methods according to the visibility of the node being expanded. Second, we use a cost-sensitive learning approach to select a sampler from the group of expansion methods chosen. Also, we propose a novel definition of visibility for RRT nodes which can be computed in an online manner and used by Adaptive RRT to select an appropriate expansion method. We present the algorithm and experimental analysis on a broad range of problems showing not only its adaptability, but efficiency gains achieved by adapting exploration methods appropriately. © 2013 IEEE.

Rapid and Efficient CRISPR/Cas9-Based Mating-Type Switching of Saccharomyces cerevisiae

Directory of Open Access Journals (Sweden)

Ze-Xiong Xie

2018-01-01

Full Text Available Rapid and highly efficient mating-type switching of Saccharomyces cerevisiae enables a wide variety of genetic manipulations, such as the construction of strains, for instance, isogenic haploid pairs of both mating-types, diploids and polyploids. We used the CRISPR/Cas9 system to generate a double-strand break at the MAT locus and, in a single cotransformation, both haploid and diploid cells were switched to the specified mating-type at ∼80% efficiency. The mating-type of strains carrying either rod or ring chromosome III were switched, including those lacking HMLα and HMRa cryptic mating loci. Furthermore, we transplanted the synthetic yeast chromosome V to build a haploid polysynthetic chromosome strain by using this method together with an endoreduplication intercross strategy. The CRISPR/Cas9 mating-type switching method will be useful in building the complete synthetic yeast (Sc2.0 genome. Importantly, it is a generally useful method to build polyploids of a defined genotype and generally expedites strain construction, for example, in the construction of fully a/a/α/α isogenic tetraploids.

Coral reef growth in an era of rapidly rising sea level: predictions and suggestions for long-term research

Energy Technology Data Exchange (ETDEWEB)

Buddemeier, R W; Smith, S V

1988-01-01

Coral reef growth is intimately linked to sea level. It has been postulated that over the next century, sea level will rise at a probable average rate of 15 mm/year, in response to fossil fuel emissions, heating, and melting of the Antarctic ice cap. This predicted rate of sea level rise is five times the present modal rate of vertical accretion on coral reef flats and 50% greater than the maximum vertical accretion rates apparently attained by coral reefs. We use these predictions and observations to offer the following hypothesis for reef growth over the next century. The vertical accretion rates of protected reef flats will accelerate from the present modal rate up to the maximum rate, in response to the more rapidly rising sea level. This more rapid vertical accretion rate will be insufficient to keep up with sea level rise, if present predictions prove to be correct. Less protected reef flats will slow their rate of growth as they become inundated and subjected to erosion by progressively larger waves. This projected sea level rise and postulated reef response will provide an opportunity for long- term studies of the response of coral reef systems to a predictable and measurable forcing function.

The growth of high density network of MOF nano-crystals across macroporous metal substrates - Solvothermal synthesis versus rapid thermal deposition

Science.gov (United States)

Maina, James W.; Gonzalo, Cristina Pozo; Merenda, Andrea; Kong, Lingxue; Schütz, Jürg A.; Dumée, Ludovic F.

2018-01-01

Fabrication of metal organic framework (MOF) films and membranes across macro-porous metal substrates is extremely challenging, due to the large pore sizes across the substrates, poor wettability, and the lack of sufficient reactive functional groups on the surface, which prevent high density nucleation of MOF crystals. Herein, macroporous stainless steel substrates (pore size 44 × 40 μm) are functionalized with amine functional groups, and the growth of ZIF-8 crystals investigated through both solvothermal synthesis and rapid thermal deposition (RTD), to assess the role of synthesis routes in the resultant membranes microstructure, and subsequently their performance. Although a high density of well interconnected MOF crystals was observed across the modified substrates following both techniques, RTD was found to be a much more efficient route, yielding high quality membranes under 1 h, as opposed to the 24 h required for solvothermal synthesis. The RTD membranes also exhibited high gas permeance, with He permeance of up to 2.954 ± 0.119 × 10-6 mol m-2 s-1 Pa-1, and Knudsen selectivities for He/N2, Ar/N2 and CO2/N2, suggesting the membranes were almost defect free. This work opens up route for efficient fabrication of MOF films and membranes across macro-porous metal supports, with potential application in electrically mediated separation applications.

Rapid and efficient radiosynthesis of [123I]I-PK11195, a single photon emission computed tomography tracer for peripheral benzodiazepine receptors

International Nuclear Information System (INIS)

Pimlott, Sally L.; Stevenson, Louise; Wyper, David J.; Sutherland, Andrew

2008-01-01

Introduction: [ 123 I]I-PK11195 is a high-affinity single photon emission computed tomography radiotracer for peripheral benzodiazepine receptors that has previously been used to measure activated microglia and to assess neuroinflammation in the living human brain. This study investigates the radiosynthesis of [ 123 I]I-PK11195 in order to develop a rapid and efficient method that obtains [ 123 I]I-PK11195 with a high specific activity for in vivo animal and human imaging studies. Methods: The synthesis of [ 123 I]I-PK11195 was evaluated using a solid-state interhalogen exchange method and an electrophilic iododestannylation method, where bromine and trimethylstannyl derivatives were used as precursors, respectively. In the electrophilic iododestannylation method, the oxidants peracetic acid and chloramine-T were both investigated. Results: Electrophilic iododestannylation produced [ 123 I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than achievable using the halogen exchange method investigated. Using chloramine-T as oxidant provided a rapid and efficient method of choice for the synthesis of [ 123 I]I-PK11195. Conclusions: [ 123 I]I-PK11195 has been successfully synthesized via a rapid and efficient electrophilic iododestannylation method, producing [ 123 I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than previously achieved

A decade of rapid change: Biocultural influences on child growth in highland Peru.

Science.gov (United States)

Oths, Kathryn S; Smith, Hannah N; Stein, Max J; Lazo Landivar, Rodrigo J

2018-03-01

In the past decade many areas of Peru have been undergoing extreme environmental, economic, and cultural change. In the highland hamlet of Chugurpampa, La Libertad, climate change has ruined harvests and led to frequent periods of migration to the coast in search of livelihood. This biocultural research examines how the changes could be affecting the growth of children who maintain residence in the highlands. Clinical records from the early 2000s were compared to those from the early 2010s. Charts were randomly selected to record anthropometric data, netting a sample of 75 children ages 0-60 months of age. Analysis of covariance was run to compare mean stature, weight, and BMI between cohorts. Percentage of children who fall below the -2 threshold for z-scores for height and weight were compared by age and cohort. A significant secular trend in growth was found, with children born more recently larger than those born a decade before. The effect is most notable in the first year of life, with the growth advantage attenuated by the age of 3 for height and age 4 for weight. While children were unlikely to be stunted from 0 to 3 years of age, 44% of the later cohort were stunted and 11% were underweight from 4 to 5 years of age. Three possible explanations for the rapid shift are entertained: more time spent on the coast during gestation and early childhood, which may attenuate the effect of hypoxia on child growth; dietary change; and increased use of biomedicine. © 2017 Wiley Periodicals, Inc.

New method for the rapid extraction of natural products: efficient isolation of shikimic acid from star anise.

Science.gov (United States)

Just, Jeremy; Deans, Bianca J; Olivier, Wesley J; Paull, Brett; Bissember, Alex C; Smith, Jason A

2015-05-15

A new, practical, rapid, and high-yielding process for the pressurized hot water extraction (PHWE) of multigram quantities of shikimic acid from star anise (Illicium verum) using an unmodified household espresso machine has been developed. This operationally simple and inexpensive method enables the efficient and straightforward isolation of shikimic acid and the facile preparation of a range of its synthetic derivatives.

Rapid Population Growth and Human Carrying Capacity: Two Perspectives. World Bank Staff Working Papers No. 690 and Population and Development Series No. 15.

Science.gov (United States)

Mahar, Dennis J., Ed.; And Others

Two perspectives on carrying capacity and population growth are examined. The first perspective, "Carrying Capacity and Rapid Population Growth: Definition, Cases, and Consequences" (Robert Muscat), explores the possible meanings of the idea of carrying capacity under developing country conditions, looks at historical and present-day cases of…

Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia

International Nuclear Information System (INIS)

Mahlia, T.M.I.; Masjuki, H.H.; Saidur, R.; Choudhury, I.A.; NoorLeha, A.R.

2003-01-01

The Malaysian economy has grown rapidly in the last two decades. This growth has increased the ownership of household electrical appliances, especially refrigerator-freezers. Almost every house in Malaysia owns a refrigerator-freezer. The Malaysia Energy Center considered implementing a minimum energy efficiency standard for household refrigerator-freezers sometime in the coming year. This paper attempts to predict the amount of energy savings in the residential sector by implementing a minimum energy efficiency standard for household refrigerator-freezers. The calculations are based on the growth of refrigerator-freezer ownership data in Malaysian households. By implementing the programs in 2004, about 8722 GWh will be saved in the year 2013. Therefore, efficiency improvement of this appliance will provide a significant impact in future electricity consumption in Malaysia

Viewpoint Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia

International Nuclear Information System (INIS)

Mahlia, T.M.I.; Masjuki, H.H.; Saidur, R.; Amalina, M.A.

2004-01-01

Malaysian economy has grown rapidly in the last two decades. This growth has increased the ownership of household electrical appliances including room air conditioners. The number of users of air conditioners is predicted to grow dramatically in Malaysian households in the future. To reduce energy consumption in the residential sector, the Malaysia Energy Commission is considering implementing minimum energy efficiency standards for room air conditioners in early 2004. This paper attempts to predict the potential mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. The calculations were based on the growth of room air conditioners ownership data in Malaysian households. The study found that the energy efficiency standards for room air conditioners would mitigate a significant amount of emissions in this country

Regional growth and energy supply: Is there an energy security issue?

Energy Technology Data Exchange (ETDEWEB)

Roop, J.M.; Freund, K.A.; Godoy-Kain, P.; Gu, A.Y.; Johnson, A.K.; Paananen, O.H.; Woodruff, M.G.

1996-12-01

This study examines how the growth of the developing world might affect energy markets in the future. Based on recent growth trends, world energy demand could reasonably be expected to grow from about 350 Exajoules (EJ: 1.0E18=0.95 Quad) to nearly 1025 EJ by the year 2020, nearly 3x current consumption estimates. Introduction of more energy-efficient technologies could reduce this growth by about 17% to 830 EJ. But one cannot rely exclusively on current trends to forecast future energy demand. The growth of the developing world will interact with supply to affect prices, which in turn will mitigate the growth of demand, and growth rates of energy use will be much more modes. Under the Business as Usual scenario, energy demand will grow to 835 EJ by 2020, and this could be reduced a further 15% to 714 EJ through the adoption of more energy efficient technologies. Fuel prices based on model results are analyzed. Energy security implications of rapid growth in the developing world are considered and found to be of likely little significance.

Peppermint Oil Promotes Hair Growth without Toxic Signs

Science.gov (United States)

Park, Min Ah; Kim, Young Chul

2014-01-01

Peppermint (Mentha piperita) is a plant native to Europe and has been widely used as a carminative and gastric stimulant worldwide. This plant also has been used in cosmetic formulations as a fragrance component and skin conditioning agent. This study investigated the effect of peppermint oil on hair growth in C57BL/6 mice. The animals were randomized into 4 groups based on different topical applications: saline (SA), jojoba oil (JO), 3% minoxidil (MXD), and 3% peppermint oil (PEO). The hair growth effects of the 4-week topical applications were evaluated in terms of hair growth, histological analysis, enzymatic activity of alkaline phosphatase (ALP), and gene expression of insulin-like growth factor-1 (IGF-1), known bio-markers for the enhanced hair growth. Of the 4 experimental groups, PEO group showed the most prominent hair growth effects; a significant increase in dermal thickness, follicle number, and follicle depth. ALP activity and IGF-1 expression also significantly increased in PEO group. Body weight gain and food efficiency were not significantly different between groups. These results suggest that PEO induces a rapid anagen stage and could be used for a practical agent for hair growth without change of body weight gain and food efficiency. PMID:25584150

A rapid, efficient, and economic device and method for the isolation and purification of mouse islet cells.

Directory of Open Access Journals (Sweden)

Yin Zongyi

Full Text Available Rapid, efficient, and economic method for the isolation and purification of islets has been pursued by numerous islet-related researchers. In this study, we compared the advantages and disadvantages of our developed patented method with those of commonly used conventional methods (Ficoll-400, 1077, and handpicking methods. Cell viability was assayed using Trypan blue, cell purity and yield were assayed using diphenylthiocarbazone, and islet function was assayed using acridine orange/ethidium bromide staining and enzyme-linked immunosorbent assay-glucose stimulation testing 4 days after cultivation. The results showed that our islet isolation and purification method required 12 ± 3 min, which was significantly shorter than the time required in Ficoll-400, 1077, and HPU groups (34 ± 3, 41 ± 4, and 30 ± 4 min, respectively; P 1000 islets. In summary, the MCT method is a rapid, efficient, and economic method for isolating and purifying murine islet cell clumps. This method overcomes some of the shortcomings of conventional methods, showing a relatively higher quality and yield of islets within a shorter duration at a lower cost. Therefore, the current method provides researchers with an alternative option for islet isolation and should be widely generalized.

Proceedings of the Flat-plate Solar Array Project Research Forum on the High-speed Growth and Characterization of Crystals for Solar Cells

Science.gov (United States)

Dumas, K. A. (Editor)

1984-01-01

Theoretical and experimental phenomena, applications, and characterization including stress/strain and other problem areas that limit the rate of growth of crystals suitable for processing into efficient, cost-effective solar cells are discussed. Melt spinning, ribbon growth, rapid solidification, laser recrystallization, and ignot growth of silicon and metals are also discussed.

CRISPR/Cas9 allows efficient and complete knock-in of a destabilization domain-tagged essential protein in a human cell line, allowing rapid knockdown of protein function.

Science.gov (United States)

Park, Arnold; Won, Sohui T; Pentecost, Mickey; Bartkowski, Wojciech; Lee, Benhur

2014-01-01

Although modulation of protein levels is an important tool for study of protein function, it is difficult or impossible to knockdown or knockout genes that are critical for cell growth or viability. For such genes, a conditional knockdown approach would be valuable. The FKBP protein-based destabilization domain (DD)-tagging approach, which confers instability to the tagged protein in the absence of the compound Shield-1, has been shown to provide rapid control of protein levels determined by Shield-1 concentration. Although a strategy to knock-in DD-tagged protein at the endogenous loci has been employed in certain parasite studies, partly due to the relative ease of knock-in as a result of their mostly haploid lifecycles, this strategy has not been demonstrated in diploid or hyperploid mammalian cells due to the relative difficulty of achieving complete knock-in in all alleles. The recent advent of CRISPR/Cas9 homing endonuclease-mediated targeted genome cleavage has been shown to allow highly efficient homologous recombination at the targeted locus. We therefore assessed the feasibility of using CRISPR/Cas9 to achieve complete knock-in to DD-tag the essential gene Treacher Collins-Franceschetti syndrome 1 (TCOF1) in human 293T cells. Using a double antibiotic selection strategy to select clones with at least two knock-in alleles, we obtained numerous complete knock-in clones within three weeks of initial transfection. DD-TCOF1 expression in the knock-in cells was Shield-1 concentration-dependent, and removal of Shield-1 resulted in destabilization of DD-TCOF1 over the course of hours. We further confirmed that the tagged TCOF1 retained the nucleolar localization of the wild-type untagged protein, and that destabilization of DD-TCOF1 resulted in impaired cell growth, as expected for a gene implicated in ribosome biogenesis. CRISPR/Cas9-mediated homologous recombination to completely knock-in a DD tag likely represents a generalizable and efficient strategy to

Entanglement growth and simulation efficiency in one-dimensional quantum lattice systems

OpenAIRE

Perales, Alvaro; Vidal, Guifre

2007-01-01

We study the evolution of one-dimensional quantum lattice systems when the ground state is perturbed by altering one site in the middle of the chain. For a large class of models, we observe a similar pattern of entanglement growth during the evolution, characterized by a moderate increase of significant Schmidt coefficients in all relevant bipartite decompositions of the state. As a result, the evolution can be accurately described by a matrix product state and efficiently simulated using the...

Control of Growth Efficiency in Young Plantation Loblolly Pine and Sweetgum through Irrigation and Fertigation Enhancement of Leaf Carbon Gain; FINAL

International Nuclear Information System (INIS)

L. Samuelson

1999-01-01

The overall objective of this study was to determine if growth efficiency of young plantation loblolly pine and sweetgum can be maintained by intensive forest management and whether increased carbon gain is the mechanism controlling growth efficiency response to resource augmentation. Key leaf physiological processes were examined over two growing seasons in response to irrigation, fertigation (irrigation with a fertilizer solution), and fertigation plus pest control (pine only). Although irrigation improved leaf net photosynthesis in pine and decreased stomatal sensitivity to vapor pressure deficit in sweetgum, no consistent physiological responses to fertigation were detected in either species. After 4 years of treatment, a 3-fold increase in woody net primary productivity was observed in both species in response to fertigation. Trees supplemented with fertigation and fertigation plus pest control exhibited the largest increases in growth and biomass. Furthermore, growth efficiency was maintained by fertigation and fertigation plus pest control, despite large increases in crown development and self-shading. Greater growth in response to intensive culture was facilitated by significant gains in leaf mass and whole tree carbon gain rather than detectable increases in leaf level processes. Growth efficiency was not maintained by significant increases in leaf level carbon gain but was possibly influenced by changes in carbon allocation to root versus shoot processes

Performance of the mixed LED light quality on the growth and energy efficiency of Arthrospira platensis.

Science.gov (United States)

Mao, Ruixin; Guo, Shuangsheng

2018-06-01

The effect of mixed light quality with red, blue, and green LED lamps on the growth of Arthrospira platensis was studied, so as to lay the theoretical and technical basis for establishing a photo-bioreactor lighting system for application in space. Meanwhile, indexes, like morphology, growth rate, photosynthetic pigment compositions, energy efficiency, and main nutritional components, were measured respectively. The results showed that the blue light combined with red light could decrease the tightness of filament, and the effect of green light was opposite. The combination of blue light or green light with red light induced the filaments to get shorter in length. The 8R2B treatment could promote the growth of Arthrospira platensis significantly, and its dry weight reached 1.36 g L -1 , which was 25.93% higher than the control. What's more, 8R2B treatment had the highest contents of carbohydrate and lipid, while 8R2G was rich in protein. 8R0.5G1.5B had the highest efficiency of biomass production, which was 161.53 mg L -1  kW -1  h -1 . Therefore, the combination of red and blue light is more conducive to the growth of Arthrospira platensis, and a higher biomass production and energy utilization efficiency can be achieved simultaneously under the mixed light quality with the ratio of 8R0.5G1.5B.

THE INFLUENCE OF THE ENTERPRISE LIFE CYCLE ON THE EFFICIENCY OF INVESTMENT

Directory of Open Access Journals (Sweden)

Viktor Koval

2017-12-01

Full Text Available The article presents results of the study of relations between the enterprise life cycle and the efficiency of investment in the context of dynamic, rapid changes in the conditions of enterprises operation and development. It is determined that one of the main factors of success is the introduction of innovative technologies in the production process, which cannot be carried out without attracting investments. It is the investment activity of enterprises that determines the dynamics of their development, the level of competitiveness and the growth of productive resources, which affects the efficiency of their activities. It is proved that it is relevant to take into account the possible negative effects of the influence of factors divergence. The purpose of the study is to analyse possibilities of determining the impact of life cycle stages on the efficiency of investing in an enterprise. The methodological basis of the research is grounded on the general scientific methods of dialectics, observation, measurement, and formalization; methods of the system and statistical analysis. In particular, to determine the influence of internal factors on the indicators of the efficiency of investment activity of the enterprise at the stages of its life cycle, deterministic factor analysis is applied; methods of systematization and synthesis, analysis and synthesis are also used. It is determined that the construction industry plays a special role in the national economy since its development creates a synergistic effect for the development of other industries, increases the standard of living of the society through solving certain socioeconomic problems. The analytical data of construction enterprises activity in Dnipropetrovsk and Odesa regions of Ukraine became the basis for the approbation of the proposed approach. The use of the life cycle model of the enterprise, which includes the stage of growth (slow and rapid growth, stability stage and the stage

Resource acquisition, distribution and end-use efficiencies and the growth of industrial society

Science.gov (United States)

Jarvis, A. J.; Jarvis, S. J.; Hewitt, C. N.

2015-10-01

A key feature of the growth of industrial society is the acquisition of increasing quantities of resources from the environment and their distribution for end-use. With respect to energy, the growth of industrial society appears to have been near-exponential for the last 160 years. We provide evidence that indicates that the global distribution of resources that underpins this growth may be facilitated by the continual development and expansion of near-optimal directed networks (roads, railways, flight paths, pipelines, cables etc.). However, despite this continual striving for optimisation, the distribution efficiencies of these networks must decline over time as they expand due to path lengths becoming longer and more tortuous. Therefore, to maintain long-term exponential growth the physical limits placed on the distribution networks appear to be counteracted by innovations deployed elsewhere in the system, namely at the points of acquisition and end-use of resources. We postulate that the maintenance of the growth of industrial society, as measured by global energy use, at the observed rate of ~ 2.4 % yr-1 stems from an implicit desire to optimise patterns of energy use over human working lifetimes.

Rapid growth within India

International Nuclear Information System (INIS)

Hayes, D.

2000-01-01

The Indian government has published (in Hydrocarbon Vision 2025) its ideas for a long term strategy for its oil industry which is currently growing at an unprecedented rate. Increasing domestic production and investment in oil exploration and production overseas figure strongly in the plan. At present, India has a refining surplus but with an annual growth of 8-10%, this will disappear in the next 2-3 years. The report recommends that India should maintain 90% self-sufficiency in refining. The report sees development of the domestic oil industry as globally competitive and helping safeguard India's assets. The capability of India's refineries, current upgrading, the newer refineries and plans for new projects are all mentioned

The growth performance of F1 transgenic mutiara catfish

Science.gov (United States)

Iskandar; Buwono, I. D.; Agung, M. U. K.

2018-04-01

The growth of catfish (African or Sangkuriang strain) these days is tend to decreased. One of the solutions due to this problem is to improve the genetics of growth using transgenesis technology, toward more profitable. The specific objective of the research is to detect the transmission of exogenous GH (African catfish GH inserts) inside the F1 transgenic Mutiara catfish using PCR (Polymerase Chain Reaction) method and to evaluate the growth performance of transgenic Mutiara catfish made using the parameters of feed conversion (FCR = Feed Conversion Ratio). Transgenic catfish (strain mutiara) F0 and F1 carried African catfish GH (600 bp) can be produced. Superiority characters of transgenic catfish represented heritability (h2 ) and heterosis (H), indicating that the offspring of hybrid F1 transgenic mutiara catfish had phenotypes rapid growth (h2 = 17.55 % and H = 42.83 %) compared to non-transgenic catfish (h 2 = 10.07 % and H = 18.56 %). Evaluation of the efficiency of feed use parameters feed conversion ratio, shows that F1 transgenic mutiara catfish (FCR = 0.85) more efficient in converting feed into meat.

Genetic variation for growth rate, feed conversion efficiency, and disease resistance exists within a farmed population of rainbow trout

DEFF Research Database (Denmark)

Henryon, Mark; Jokumsen, Alfred; Berg, Peer

2002-01-01

The objective of this study was to test that additive genetic (co)variation for survival, growth rate, feed conversion efficiency, and resistance to viral haemorrhagic septicaemia (VHS) exists within a farmed population of rainbow trout. Thirty sires and 30 dams were mated by a partly factorial...... the predicted breeding values for VHS resistance and the predicted breeding values for the body weights, body length, and feed conversion efficiencies. These results demonstrate that additive genetic (co)variation for growth rate, feed conversion efficiency, and VHS resistance does exist within the farmed...... mating design. Each sire was mated to two dams, and each dam was mated to two sires, producing 50 viable full-sib families (29 sires, 25 dams). The fish from these families were reared for a 215-day growout period, and were assessed for survival between days 52 and 215, growth rate (i.e., body weight...

Metabolic efficiency in yeast Saccharomyces cerevisiae in relation to temperature dependent growth and biomass yield.

Science.gov (United States)

Zakhartsev, Maksim; Yang, Xuelian; Reuss, Matthias; Pörtner, Hans Otto

2015-08-01

Canonized view on temperature effects on growth rate of microorganisms is based on assumption of protein denaturation, which is not confirmed experimentally so far. We develop an alternative concept, which is based on view that limits of thermal tolerance are based on imbalance of cellular energy allocation. Therefore, we investigated growth suppression of yeast Saccharomyces cerevisiae in the supraoptimal temperature range (30-40°C), i.e. above optimal temperature (Topt). The maximal specific growth rate (μmax) of biomass, its concentration and yield on glucose (Yx/glc) were measured across the whole thermal window (5-40°C) of the yeast in batch anaerobic growth on glucose. Specific rate of glucose consumption, specific rate of glucose consumption for maintenance (mglc), true biomass yield on glucose (Yx/glc(true)), fractional conservation of substrate carbon in product and ATP yield on glucose (Yatp/glc) were estimated from the experimental data. There was a negative linear relationship between ATP, ADP and AMP concentrations and specific growth rate at any growth conditions, whilst the energy charge was always high (~0.83). There were two temperature regions where mglc differed 12-fold, which points to the existence of a 'low' (within 5-31°C) and a 'high' (within 33-40°C) metabolic mode regarding maintenance requirements. The rise from the low to high mode occurred at 31-32°C in step-wise manner and it was accompanied with onset of suppression of μmax. High mglc at supraoptimal temperatures indicates a significant reduction of scope for growth, due to high maintenance cost. Analysis of temperature dependencies of product formation efficiency and Yatp/glc revealed that the efficiency of energy metabolism approaches its lower limit at 26-31°C. This limit is reflected in the predetermined combination of Yx/glc(true), elemental biomass composition and degree of reduction of the growth substrate. Approaching the limit implies a reduction of the safety margin

Building a business to close the efficiency gap. The Swedish ESCO Experience

International Nuclear Information System (INIS)

Lindgren Soroye, K.; Nilsson, L.J.

2010-01-01

Energy service companies (ESCOs) are often portrayed as important change agents in capturing the opportunity to curb energy demand and mitigate climate change through increased efficiency. Yet, the literature in this area is limited. While many studies analyze economic and environmental savings from energy efficiency programs, far less attention has been devoted to evaluating managerial and other challenges for ESCOs to transform the 'efficiency gap' into a viable business. Sweden presents an interesting case study given its early experience in energy market reform as well as the rapid growth in recent years of its ESCO market. By conducting in-depth interviews with ESCOs operating in Sweden, this research addresses the following: (1) current market opportunity analysis, including how Swedish market conditions shape firms' business strategies, (2) business characteristics and service functions, with attention to perceptions regarding which market segments are considered compelling, and (3) how policy might expand the size and attractiveness of additional sectors/market segments. This analysis is informed by additional discussions with policymaker, agencies, authorities, and customers. The insights garnered are important as Member States prepare to implement the Directive on Energy End-use Efficiency and Energy Services. Despite rapid growth, ongoing challenges remain for ESCOs. Government still has a role in education, policy, and residential sector solutions. Greater details and data on the energy savings produced by ESCO projects are needed. Future research could address best practices for reporting data from ESCO projects. Moreover, with additional data on ESCO projects, studies could benchmark these results with other international programs to promote energy efficiency.

Rapid and Efficient Synthesis of Silver Nanofluid Using Electrical Discharge Machining

Directory of Open Access Journals (Sweden)

Kuo-Hsiung Tseng

2013-01-01

Full Text Available The electrical discharge machining (EDM system has been proven feasible as a rapid and efficient method for silver nanofluid preparation. This study prepared the silver nano-fluid via EDM and investigated the relationship between its process parameters and product characteristics. The prior study had found that the silver nano-fluid prepared by EDM contained both silver nanoparticles and silver ions. Silver ions had revealed the cause of the high suspension of the silver nanoparticles. To examine the relationship between the stability of silver nanofluid and the process parameters, this study quantified the relationship of process parameters to the material removal rate (MRR of silver electrode and silver ion output rate (IOR in the fluid, in order to achieve the most effective process parameter condition. Furthermore, the stability of silver nano-fluid was analyzed by various devices, including UV-Vis spectroscopy, size-distribution, and Zeta-potential analyzer. The effects of MRR, IOR, particle size, Zeta-potential, and optical properties of silver nanofluid under different process parameters are also discussed.

Rapid population growth and fragile environments: the sub-Saharan African and south Asian experience.

Science.gov (United States)

Caldwell, J C; Caldwell, P

1994-02-18

Case studies of the world's two poorest regions, sub-Saharan Africa and South Asia, were used to illustrate the compromised standard of living of the poor and environmental damage due to continued rapid population growth. The conclusion was that the livelihoods of the poor should not be endangered for preserving the living standards of richer people. Nations must not ignore the challenges of reducing population growth as fast as can be achieved. The transitional period over the next 50 years is the main concern, because population growth rates will be slowing. Rural population growth is expected to decline from 60% of total population growth in South Asia to 7% between 2000 and 2025; similarly the decline in sub-Saharan Africa would be from 50% to 15%. Over the past 30 years, food production in South Asia has kept pace with population growth. Sub-Saharan Africa has adopted food importation to meet demand. African problems are a low resource base, faster population growth, and the fact that governments and individuals are too poor to maintain soil fertility. Long-term studies of how much soil depletion will occur are not available for these regions, and local area studies are not as pessimistic. Transition policies are needed to put "people first in terms of engineered or directed population and ecological change." The six main issues are the following: 1) the Brundtland Commission appropriately identified poverty as the main cause and effect of environmental degradation because of the threat to survival; 2) the verdict is still out about whether food production will keep pace with population growth through economic growth and investment in agriculture; 3) empirical research is needed to examine local social and regulatory institutions and the possibility of reinforcing these mechanisms rather than instituting central controls; 4) central coercion or modernizing economic policies can destroy local level controls; 5) famine is a complex ecological phenomenon and the

The Rapid Urban Growth Triad: A New Conceptual Framework for Examining the Urban Transition in Developing Countries

Directory of Open Access Journals (Sweden)

Kyle Farrell

2017-08-01

Full Text Available Although the urban transition is a universal event that unfolds in all countries, the determinants, patterns, and outcomes do not necessarily follow a uniform process. With the urban transition being basically completed in developed countries around the turn of the 21st century, the growth of cities today is almost entirely confined to developing countries. Still, much of our conceptual understanding of this process is derived from earlier accounts, with definitions rooted in a historical context. This has resulted in common misconceptions such as a tendency to view the growth of cities primarily as an outcome of rural to urban migration, neglecting the growing contributions of urban natural population increase and reclassification of rural areas. A tendency to treat the components of urban growth in isolation has created a rift within the urban studies discourse, preventing any real theorization of their combined impacts and the interplay among them. Applying a systems thinking approach, this paper introduces a multidisciplinary framework for conceptualizing rapid urban growth in developing countries. The framework offers explanatory power to previously neglected components of urban growth and serves as a diagnostic for examining the urban transition—ultimately revealing new policy levers for managing it in a sustainable way.

Rapid and efficient radiosynthesis of [{sup 123}I]I-PK11195, a single photon emission computed tomography tracer for peripheral benzodiazepine receptors

Energy Technology Data Exchange (ETDEWEB)

Pimlott, Sally L. [Department of Clinical Physics, West of Scotland Radionuclide Dispensary, Western Infirmary, G11 6NT Glasgow (United Kingdom)], E-mail: s.pimlott@clinmed.gla.ac.uk; Stevenson, Louise [Department of Chemistry, WestCHEM, University of Glasgow, G12 8QQ Glasgow (United Kingdom); Wyper, David J. [Institute of Neurological Sciences, Southern General Hospital, G51 4TF Glasgow (United Kingdom); Sutherland, Andrew [Department of Chemistry, WestCHEM, University of Glasgow, G12 8QQ Glasgow (United Kingdom)

2008-07-15

Introduction: [{sup 123}I]I-PK11195 is a high-affinity single photon emission computed tomography radiotracer for peripheral benzodiazepine receptors that has previously been used to measure activated microglia and to assess neuroinflammation in the living human brain. This study investigates the radiosynthesis of [{sup 123}I]I-PK11195 in order to develop a rapid and efficient method that obtains [{sup 123}I]I-PK11195 with a high specific activity for in vivo animal and human imaging studies. Methods: The synthesis of [{sup 123}I]I-PK11195 was evaluated using a solid-state interhalogen exchange method and an electrophilic iododestannylation method, where bromine and trimethylstannyl derivatives were used as precursors, respectively. In the electrophilic iododestannylation method, the oxidants peracetic acid and chloramine-T were both investigated. Results: Electrophilic iododestannylation produced [{sup 123}I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than achievable using the halogen exchange method investigated. Using chloramine-T as oxidant provided a rapid and efficient method of choice for the synthesis of [{sup 123}I]I-PK11195. Conclusions: [{sup 123}I]I-PK11195 has been successfully synthesized via a rapid and efficient electrophilic iododestannylation method, producing [{sup 123}I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than previously achieved.

Radiation utilization efficiency and the growth of soybeans exposed to ozone: a comparative analysis

International Nuclear Information System (INIS)

Leadley, P.W.; Reynolds, J.F.; Flagler, R.; Heagle, A.S.

1990-01-01

Effects of ozone (O 3 ) on field-planted soybeans (Glycine max (L.) Merr. ‘Davis’) were examined using a simple crop-growth model that resolves the rate of increase in crop dry weight into the total amount of radiation intercepted by a crop canopy and the efficiency of conversion of this energy into dry matter (ϵ, termed utilization efficiency). The objectives were : (1) to examine the effects of O 3 on light interception and ϵ, and compare these results with a similar study by Unsworth et al. to determine whether the effects of O 3 are consistent from year to year, and (2) to determine whether ϵ is more sensitive to O 3 during reproductive than vegetative growth and whether allocation of aboveground biomass to seed is affected by O 3 . Five O 3 concentrations (seasonal means of 30, 52, 57, 76 and 99 ppb) were maintained in open-top chambers over the growing season. All treatments were irrigated. Leaf, stem and pod weights and leaf area were measured weekly throughout the season. Total incident solar radiation and total radiation transmission through the canopy were measured with tube solarimeters and electronic integrating devices. Increased O 3 concentrations were accompanied by depressed leaf area expansion and earlier leaf senescence, but did not affect total light interception over the entire season. Utilization efficiency (ϵ) was reduced in high O 3 treatments and was the most important factor in the reduction of yield; ϵ for the whole season declined from 0.89 g MJ −1 in the 30-ppb treatment to a low of 0.68 g MJ −1 in the 99-ppb treatment. Efficiencies were higher during reproductive than vegetative growth, but were not more sensitive to O 3 . Seed yield decreased from 450 g m −2 in the 30-ppb treatment to 320 g m −2 in the 99-ppb treatment. Fractional allocation of aboveground dry weight to seed was not affected by O 3 . Reduced ϵ values with increasing O 3 concentrations were consistent with an earlier study by Unsworth et al. however

Development of a high efficiency integration system and promoter library for rapid modification of Pseudomonas putida KT2440

Energy Technology Data Exchange (ETDEWEB)

Elmore, Joshua R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Furches, Anna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Wolff, Gara N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Gorday, Kent [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Guss, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division

2017-04-15

Pseudomonas putida strains are highly robust bacteria known for their ability to efficiently utilize a variety of carbon sources, including aliphatic and aromatic hydrocarbons. Recently, P. putida has been engineered to valorize the lignin stream of a lignocellulosic biomass pretreatment process. Nonetheless, when compared to platform organisms such as Escherichia coli, the toolkit for engineering P. putida is underdeveloped. Heterologous gene expression in particular is problematic. Plasmid instability and copy number variance provide challenges for replicative plasmids, while use of homologous recombination for insertion of DNA into the chromosome is slow and laborious. Furthermore, heterologous expression efforts to date typically rely on overexpression of exogenous pathways using a handful of poorly characterized promoters. In order to improve the P. putida toolkit, we developed a rapid genome integration system using the site-specific recombinase from bacteriophage Bxb1 to enable rapid, high efficiency integration of DNA into the P. putida chromosome. We also developed a library of synthetic promoters with various UP elements, -35 sequences, and -10 sequences, as well as different ribosomal binding sites. We tested these promoters using a fluorescent reporter gene, mNeonGreen, to characterize the strength of each promoter, and identified UP-element-promoter-ribosomal binding sites combinations capable of driving a ~150-fold range of protein expression levels. One additional integrating vector was developed that confers more robust kanamycin resistance when integrated at single copy into the chromosome. This genome integration and reporter systems are extensible for testing other genetic parts, such as examining terminator strength, and will allow rapid integration of heterologous pathways for metabolic engineering.

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

Science.gov (United States)

Santarius, Tilman

2015-03-01

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may `eat up' parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential `psychological rebound effects.' It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough "rule of thumb", in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

Plant Growth and Development: An Outline for a Unit Structured Around the Life Cycle of Rapid-Cycling Brassica Rapa.

Science.gov (United States)

Becker, Wayne M.

This outline is intended for use in a unit of 10-12 lectures on plant growth and development at the introductory undergraduate level as part of a course on organismal biology. The series of lecture outlines is structured around the life cycle of rapid-cycling Brassica rapa (RCBr). The unit begins with three introductory lectures on general plant…

TRENDS IN TAX DEVELOPMENT - EFFICIENCY AND ECONOMIC GROWTH

Directory of Open Access Journals (Sweden)

Tanya Todorova

2017-12-01

Full Text Available The discussion on the role of the state and the amount of public revenue to maintain a balance between economic stability and social justice lasts for decades. The need for active state participation in the economy and the use of public revenue as a fiscal instrument is tangible. Delayed economic growth rates on global, regional and national level are a challenge to budget stability. In this article, the object of research is taxation, the subject - the trends and challenges to its effectiveness. The aim is to clarify whether there is a clear strategy on the marginal and implicit tax rate on the income of the population by comparing Bulgaria and other newly admitted countries in the EU (Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Slovenia and Romania. The main task is to justify the need to build a long-term strategy to increase the efficiency of labor taxation in order to achieve optimal distribution and redistribution of income.

Regional total factor energy efficiency: An empirical analysis of industrial sector in China

International Nuclear Information System (INIS)

Wang, Zhao-Hua; Zeng, Hua-Lin; Wei, Yi-Ming; Zhang, Yi-Xiang

2012-01-01

Highlights: ► We evaluate energy efficiency under framework of total factor energy efficiency. ► We focus on industry sector of China. ► We use statistical data of industrial enterprises above designated size. ► Energy efficiencies among regions in China are obvious because of technological differences. ► Large scale of investment should be stopped especially in central and western regions. -- Abstract: The rapid growth of the Chinese economy has resulted in great pressure on energy consumption, especially the energy intensive sector – the industrial sector. To achieve sustainable development, China has to consider how to promote energy efficiency to meet the demand of Chinese rapid economic growth, as the energy efficiency of China is relatively low. Meanwhile, the appeal of energy saving and emission reduction has been made by the Chinese central government. Therefore, it is important to evaluate the energy efficiency of industrial sector in China and to assess efficiency development probabilities. The framework of total factor energy efficiency index is adopted to determine the discrepancy of energy efficiency in Chinese industrial sector based on the provincial statistical data of industrial enterprises above designated size in 30 provinces from 2005 to 2009, with gross industrial output as the output value and energy consumption, average remaining balance of capital assets and average amount of working force as the input values. Besides, in considerate of the regional divide of China, namely eastern, central, and western, and economic development differences in each region, energy efficiency of each region is also analysed in this paper. The results show that there is room for China to improve its energy efficiency, especially western provinces which have large amount of energy input excess. Generally speaking, insufficient technological investment and fail of reaching best scale of manufacture are two factors preventing China from energy

Regional Determinants of Efficiency Growth of Small and Medium-Sized Enterprises. Evidence from Poland

Directory of Open Access Journals (Sweden)

Teresa Łuczka

2012-01-01

Full Text Available SMEs sector plays a vital role in modern economies. Therefore, the interest in its functioning among economists is in fact quite natural. This article is a part of a current research on regional factors contributing to the development of enterprises in this category. The first section examines earlier studies in this field conducted globally and in Poland. According to them, many elements enable the SME’s development. It is not surprisingly that the specified set of pro-growth factors does not exists. Next section describes the results of the author’s own studies in the fields. These studies relate to regional factors contributing to the efficiency growth of micro, small and medium-sized enterprises in Poland. Data used in the study was collected from GUS[1] and EUROSTAT and encompassed 16 provinces for the years 2003-2008. The model prepared included 11 independent variables on labor force, social mobility, living standard and R&D policy. The authors would have gladly considered more than 11 explanatory variable, but the inaccessibility of such data made it impossible. In the next step, using GRETL software, equations of regression were defined. On this basis it was concluded that the most important factors contributing to efficiency growth of SMEs are the amount of spending on R&D and the level of wages.

The Seneca effect why growth is slow but collapse is rapid

CERN Document Server

Bardi, Ugo

2017-01-01

The essence of this book can be found in a line written by the ancient Roman Stoic Philosopher Lucius Annaeus Seneca: "Fortune is of sluggish growth, but ruin is rapid". This sentence summarizes the features of the phenomenon that we call "collapse," which is typically sudden and often unexpected, like the proverbial "house of cards." But why are such collapses so common, and what generates them? Several books have been published on the subject, including the well-known "Collapse" by Jared Diamond (2005), "The collapse of complex societies" by Joseph Tainter (1998) and "The Tipping Point," by Malcom Gladwell (2000). Why The Seneca Effect? This book is an ambitious attempt to pull these various strands together by describing collapse from a multi-disciplinary viewpoint. The reader will discover how collapse is a collective phenomenon that occurs in what we call today "complex systems," with a special emphasis on system dynamics and t he concept of "feedback." From this foundation, Bardi applies the...

Long-Term Urban Growth and Land Use Efficiency in Southern Europe: Implications for Sustainable Land Management

Directory of Open Access Journals (Sweden)

Marco Zitti

2015-03-01

Full Text Available The present study illustrates a multidimensional analysis of an indicator of urban land use efficiency (per-capita built-up area, LUE in mainland Attica, a Mediterranean urban region, along different expansion waves (1960–2010: compaction and densification in the 1960s, dispersed growth along the coasts and on Athens’ fringe in the 1970s, fringe consolidation in the 1980s, moderate re-polarization and discontinuous expansion in the 1990s and sprawl in remote areas in the 2000s. The non-linear trend in LUE (a continuous increase up to the 1980s and a moderate decrease in 1990 and 2000 preceding the rise observed over the last decade reflects Athens’ expansion waves. A total of 23 indicators were collected by decade for each municipality of the study area with the aim of identifying the drivers of land use efficiency. In 1960, municipalities with low efficiency in the use of land were concentrated on both coastal areas and Athens’ fringe, while in 2010, the lowest efficiency rate was observed in the most remote, rural areas. Typical urban functions (e.g., mixed land uses, multiple-use buildings, vertical profile are the variables most associated with high efficiency in the use of land. Policies for sustainable land management should consider local and regional factors shaping land use efficiency promoting self-contained expansion and more tightly protecting rural and remote land from dispersed urbanization. LUE is a promising indicator reflecting the increased complexity of growth patterns and may anticipate future urban trends.

Collaborative validation of a rapid method for efficient virus concentration in bottled water

DEFF Research Database (Denmark)

Schultz, Anna Charlotte; Perelle, Sylvie; Di Pasquale, Simona

2011-01-01

. Three newly developed methods, A, B and C, for virus concentration in bottled water were compared against the reference method D: (A) Convective Interaction Media (CIM) monolithic chromatography; filtration of viruses followed by (B) direct lysis of viruses on membrane; (C) concentration of viruses......Enteric viruses, including norovirus (NoV) and hepatitis A virus (HAV), have emerged as a major cause of waterborne outbreaks worldwide. Due to their low infectious doses and low concentrations in water samples, an efficient and rapid virus concentration method is required for routine control...... by ultracentrifugation; and (D) concentration of viruses by ultrafiltration, for each methods' (A, B and C) efficacy to recover 10-fold dilutions of HAV and feline calicivirus (FCV) spiked in bottles of 1.5L of mineral water. Within the tested characteristics, all the new methods showed better performance than method D...

Efficient growth of complex graph states via imperfect path erasure

International Nuclear Information System (INIS)

Campbell, Earl T; Fitzsimons, Joseph; Benjamin, Simon C; Kok, Pieter

2007-01-01

Given a suitably large and well connected (complex) graph state, any quantum algorithm can be implemented purely through local measurements on the individual qubits. Measurements can also be used to create the graph state: path erasure techniques allow one to entangle multiple qubits by determining only global properties of the qubits. Here, this powerful approach is extended by demonstrating that even imperfect path erasure can produce the required graph states with high efficiency. By characterizing the degree of error in each path erasure attempt, one can subsume the resulting imperfect entanglement into an extended graph state formalism. The subsequent growth of the improper graph state can be guided, through a series of strategic decisions, in such a way as to bound the growth of the error and eventually yield a high-fidelity graph state. As an implementation of these techniques, we develop an analytic model for atom (or atom-like) qubits in mismatched cavities, under the double-heralding entanglement procedure of Barrett and Kok (2005 Phys. Rev. A 71 060310). Compared to straightforward post-selection techniques our protocol offers a dramatic improvement in growing complex high-fidelity graph states

The effect of Nitrogen on Radiation Use Efficiency and Growth indices of Maize Hybrids (Zea mays L. under Kermanshah Condition

Directory of Open Access Journals (Sweden)

M Ahmadi

2018-02-01

Full Text Available Introduction Dry matter produced by crops is a function of absorbed radiation and radiation use efficiency. Radiation use efficiency is an effective approach to quantify total dry matter accumulation. It is defined as biomass produced by plant for solar radiation absorbed during growing season. Radiation use efficiency is often calculated from the linear regression slope between total dry matter accumulation and cumulative solar radiation absorbed. It is affected by species, weather conditions, crop management, plant development stages, and the production of photosynthesis compounds. Among the factors of agronomic management, nitrogen fertilizer and crop species are the most important aspects that affect the radiation use efficiency. Therefore, by considering the fact that Kermanshah province has favorable condition in terms of more natural resources such as solar radiation, the aims of the present study were evaluation of nitrogen effect on radiation use efficiency, growth indices and yield of some current maize hybrids. Materials and Methods A split plot experiment was done based on randomized complete block design with 4 replications at 2014. Treatments were 4 levels of nitrogen fertilizer application (40%, 70%, 100% and 140% of the maize demand to nitrogen which based on the amount recommended by soil experiment equivalent to 138, 238, 350 and 483 kg.ha-1 of urea as main plots and 3 maize hybrids KSC-704, BC-678 and Simon as sub plots. Leaf area index and total dry matter yield measured during growing season. Crop growth rate and relative growth ratio calculated by differentiation from fitted equation on total dry matter yield data. In order to calculate radiation use efficiency, sunny hours for Kermanshah latitude obtained from the nearest weather station. Daily solar radiation simulated by the method cited by Goudriaan and Van Laar (1993 for growing season. The absorbed radiation in each stage obtained through the multiplication simulated

Validation Study of Rapid Assays of Bioburden, Endotoxins and Other Contamination.

Science.gov (United States)

Shintani, Hideharu

2016-01-01

Microbial testing performed in support of pharmaceutical and biopharmaceutical production falls into three main categories: detection (qualitative), enumeration (quantitative), and characterization/identification. Traditional microbiological methods are listed in the compendia and discussed by using the conventional growth-based techniques, which are labor intensive and time consuming. In general, such tests require several days of incubation for microbial contamination (bioburden) to be detected, and therefore management seldom is able to take proactive corrective measures. In addition, microbial growth is limited by the growth medium used and incubation conditions, thus impacting testing sensitivity, accuracy, and reproducibility. 　For more than 20 years various technology platforms for rapid microbiological methods (RMM) have been developed, and many have been readily adopted by the food industry and clinical microbiology laboratories. Their use would certainly offer drug companies faster test turnaround times to accommodate the aggressive deadlines for manufacturing processes and product release. Some rapid methods also offer the possibility for real-time microbial analyses, enabling management to respond to microbial contamination events in a more timely fashion, and can provide cost savings and higher efficiencies in quality control testing laboratories. Despite the many proven business and quality benefits and the fact that the FDA's initiative to promote the use of process analytical technology (PAT) includes rapid microbial methods, pharmaceutical and biopharmaceutical industries have been somewhat slow to embrace alternative microbial methodologies for several reasons. The major reason is that the bioburden counts detected by the incubation method and rapid assay are greatly divergent. 　The use of rapid methods is a dynamic field in applied microbiology and one that has gained increased attention nationally and internationally over time. This topic

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

Energy Technology Data Exchange (ETDEWEB)

Santarius, Tilman, E-mail: tilman@santarius.de [Visiting Scholar, Institute of European Studies and Energy and Resources Group, University of California, Berkeley, 310 Barrows Hall, Berkeley, CA 94720-3050 (United States)

2015-03-30

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

Rapid and efficient introduction of a foreign gene into bacterial artificial chromosome-cloned varicella vaccine by Tn7-mediated site-specific transposition

International Nuclear Information System (INIS)

Somboonthum, Pranee; Koshizuka, Tetsuo; Okamoto, Shigefumi; Matsuura, Masaaki; Gomi, Yasuyuki; Takahashi, Michiaki; Yamanishi, Koichi; Mori, Yasuko

2010-01-01

Using a rapid and reliable system based on Tn7-mediated site-specific transposition, we have successfully constructed a recombinant Oka varicella vaccine (vOka) expressing the mumps virus (MuV) fusion protein (F). The backbone of the vector was our previously reported vOka-BAC (bacterial artificial chromosome) genome. We inserted the transposon Tn7 attachment sequence, LacZα-mini-attTn7, into the region between ORF12 and ORF13 to generate a vOka-BAC-Tn genome. The MuV-F expressing cassette was transposed into the vOka-BAC genome at the mini-attTn7 transposition site. MuV-F protein was expressed in recombinant virus, rvOka-F infected cells. In addition, the MuV-F protein was cleaved in the rvOka-F infected cells as in MuV-infected cells. The growth of rvOka-F was similar to that of the original recombinant vOka without the F gene. Thus, we show that Tn7-mediated transposition is an efficient method for introducing a foreign gene expression cassette into the vOka-BAC genome as a live virus vector.

INCOME INEQUALITY AND ECONOMIC GROWTH: THE CASE OF INDIAN STATES 1980-2009-10

Directory of Open Access Journals (Sweden)

Ross Stewart

2012-06-01

Full Text Available Beginning in the 1980s, India has experienced an acceleration of economic growth by way of a promotion of a more efficient pro business and market oriented model. Following the rapid growth of the 1980s, the 1990s brought continued deregulation through market liberalization policies and additional progressive strides by way of a financial crisis in the spring of 1991. These happenings and others have had significant impacts on India's income inequality; therefore, this study endeavors to investigate primarily the relationship between income inequality and economic growth, while surveying other relevant macroeconomic variables.

Rapid and efficient CRISPR/Cas9 gene inactivation in human neurons during human pluripotent stem cell differentiation and direct reprogramming.

Science.gov (United States)

Rubio, Alicia; Luoni, Mirko; Giannelli, Serena G; Radice, Isabella; Iannielli, Angelo; Cancellieri, Cinzia; Di Berardino, Claudia; Regalia, Giulia; Lazzari, Giovanna; Menegon, Andrea; Taverna, Stefano; Broccoli, Vania

2016-11-18

The CRISPR/Cas9 system is a rapid and customizable tool for gene editing in mammalian cells. In particular, this approach has widely opened new opportunities for genetic studies in neurological disease. Human neurons can be differentiated in vitro from hPSC (human Pluripotent Stem Cells), hNPCs (human Neural Precursor Cells) or even directly reprogrammed from fibroblasts. Here, we described a new platform which enables, rapid and efficient CRISPR/Cas9-mediated genome targeting simultaneously with three different paradigms for in vitro generation of neurons. This system was employed to inactivate two genes associated with neurological disorder (TSC2 and KCNQ2) and achieved up to 85% efficiency of gene targeting in the differentiated cells. In particular, we devised a protocol that, combining the expression of the CRISPR components with neurogenic factors, generated functional human neurons highly enriched for the desired genome modification in only 5 weeks. This new approach is easy, fast and that does not require the generation of stable isogenic clones, practice that is time consuming and for some genes not feasible.

Rapid growth in early childhood associated with young adult overweight and obesity--evidence from a community based cohort study.

Science.gov (United States)

Sutharsan, Ratneswary; O'Callaghan, Michael J; Williams, Gail; Najman, Jake M; Mamun, Abdullah A

2015-08-08

Rapid weight gain in early life may increase the risk of overweight and obesity in adulthood. We investigated the association between the rate of growth during early childhood and the development of overweight and obesity in young adults. We used a prospective cohort study of 2077 young adults who were born between 1981 and 1984 in Brisbane, Australia and had anthropometry measurements available at birth, 6 months, 5 years, 14 years and 21 years of age. The associations of rate of early growth with body mass index (BMI), waist circumference (WC) and waist-to-hip ratio (WHR) and their categories at 21 years were studied using multivariate analysis. We found that rapid weight gain [> + 0.67 standard deviation score (SDS)] in the first 5 years of life was associated with young adults' overweight status (BMI: adjusted OR = 2.35, 95% CI, 1.82-3.03; WC: adjusted OR = 2.20, 95% CI, 1.65-2.95). We also observed that slow weight gain in the first 5 years of age (young adulthood, in contrast slow weight gain was inversely associated with weight status at 21 years.

Data Center Energy Efficiency Standards in India: Preliminary Findings from Global Practices

Energy Technology Data Exchange (ETDEWEB)

Raje, Sanyukta; Maan, Hermant; Ganguly, Suprotim; Singh, Tanvin; Jayaram, Nisha; Ghatikar, Girish; Greenberg, Steve; Kumar, Satish; Sartor, Dale

2015-06-01

Global data center energy consumption is growing rapidly. In India, information technology industry growth, fossil-fuel generation, and rising energy prices add significant operational costs and carbon emissions from energy-intensive data centers. Adoption of energy-efficient practices can improve the global competitiveness and sustainability of data centers in India. Previous studies have concluded that advancement of energy efficiency standards through policy and regulatory mechanisms is the fastest path to accelerate the adoption of energy-efficient practices in the Indian data centers. In this study, we reviewed data center energy efficiency practices in the United States, Europe, and Asia. Using evaluation metrics, we identified an initial set of energy efficiency standards applicable to the Indian context using the existing policy mechanisms. These preliminary findings support next steps to recommend energy efficiency standards and inform policy makers on strategies to adopt energy-efficient technologies and practices in Indian data centers.

Fluorescent QDs-polystyrene composite nanospheres for highly efficient and rapid protein antigen detection

Energy Technology Data Exchange (ETDEWEB)

Zhou, Changhua; Mao, Mao [Henan University, Key Laboratory for Special Functional Materials of the Ministry of Education (China); Yuan, Hang [Tsinghua University, Life Science Division, Graduate School at Shenzhen (China); Shen, Huaibin [Henan University, Key Laboratory for Special Functional Materials of the Ministry of Education (China); Wu, Feng; Ma, Lan, E-mail: malan@sz.tsinghua.edu.cn [Tsinghua University, Life Science Division, Graduate School at Shenzhen (China); Li, Lin Song, E-mail: lsli@henu.edu.cn [Henan University, Key Laboratory for Special Functional Materials of the Ministry of Education (China)

2013-09-15

In this paper, high-quality carboxyl-functionalized fluorescent (red, green, and blue emitting) nanospheres (46-103 nm) consisting of hydrophobic quantum dots (QDs) and polystyrene were prepared by a miniemulsion polymerization approach. This miniemulsion polymerization approach induced a homogeneous distribution and high aqueous-phase transport efficiency of fluorescent QDs in composite nanospheres, which proved the success of our encoding QDs strategy. The obtained fluorescent nanospheres exhibited high stability in aqueous solution under a wide range of pH, different salt concentrations, PBS buffer, and thermal treatment at 80 Degree-Sign C. Based on the red emitting composite nanosphere, we performed fluorescent lateral flow immunoassay (LFIA) strips for high-sensitivity and rapid alpha-fetal protein detection. The detection limit reached 0.1 ng/mL, which was 200 times higher than commercial colloidal gold-labeled LFIA strips, and it reached similar detection level in enzyme-linked immunosorbent assay kit.

Rapid Population Growth-Cause or Result of Global Problems?

Science.gov (United States)

Schwartz, Richard H.

Explosive population growth is a symptom of the world's unjust and inequitable social, political, and economic conditions. The current rate of growth is staggering, particularly in the cities of the underdeveloped countries. While some progress has been made in slowing population growth, several factors still contribute to its momentum. One of…

Association of malignancy with rapid growth in early lesions induced by irradiation of rat skin

International Nuclear Information System (INIS)

McGregor, J.F.

1979-01-01

Epithelial lesions induced by irradiation of rat skin were studied to determine (a) the relationship of malignancy to dose, (b) the types of lesions and circumstances leading to overt malignancy, and (c) the growth rates of lesions progressing to malignancy versus those of lesions remaining benign. High doses of radiation were shown to be associated with the production of epidermal cancers, the maximum yield being obtained at 6,400 rads. Conversely, a peak yield of noncancerous lesions was obtained at 1,600 rads. This association between malignancy and high dose was consistent for cancers evolving from warts, cysts, and chronic ulcers. Although the proportion of warts among the induced lesions was much higher than that of the cysts or chronic ulcers (76, 14, and 10%, respectively), the likelihood of warts becoming cancerous was substantially lower (14, 23, and 21%). The combined data for all doses showed that the latency period of the epidermal cancers was significantly (P = 0.015) shorter than that of the benign tumors. Rapid growth rates were observed for warts, cysts, and chronic ulcers progressing to overt cancer, and these did not overlap at any point on the growth scale with rates for benign tumors. This finding suggested that the potential for malignant development had been established early in the carcinogenic process, very likely at induction

UV irradiation assisted growth of ZnO nanowires on optical fiber surface

Energy Technology Data Exchange (ETDEWEB)

Gong, Bo; Shi, Tielin; Liao, Guanglan; Li, Xiaoping; Huang, Jie; Zhou, Temgyuan; Tang, Zirong, E-mail: zirong@mail.hust.edu.cn

2017-06-01

Highlights: • A new fabrication process combined a hydrothermal process with UV irradiation from optical fiber is developed. • The growth of ZnO nanowires is efficient in the utilization of UV light. • A novel hybrid structure which integrates ZnO nanowires on optical fiber surface is synthesized. • The UV assisted growth of ZnO nanowires shows preferred orientation and better quality. • A mechanism of growing ZnO nanowires under UV irradiation is proposed. - Abstract: In this paper, a novel approach was developed for the enhanced growth of ZnO nanowires on optical fiber surface. The method combined a hydrothermal process with the efficient UV irradiation from the fiber core, and the effects of UV irradiation on the growth behavior of ZnO nanowires were investigated. The results show that UV irradiation had great effects on the preferred growth orientation and the quality of the ZnO nanowires. The crystallization velocity along the c-axis would increase rapidly with the increase of the irradiation power, while the growth process in the lateral direction was marginally affected by the irradiation. The structure of ZnO nanowires also shows less oxygen vacancy with UV irradiation of higher power. The developed approach is applicable for the efficient growth of nanowires on the fiber surface, and the ZnO nanowires/optical fiber hybrid structures have great potentials for a wide variety of applications such as optical fiber sensors and probes.

Determination of crystal growth rates during rapid solidification of polycrystalline aluminum by nano-scale spatio-temporal resolution in situ transmission electron microscopy

Energy Technology Data Exchange (ETDEWEB)

Zweiacker, K., E-mail: Kai@zweiacker.org; Liu, C.; Wiezorek, J. M. K. [Department of Mechanical Engineering and Materials Science, University of Pittsburgh, 648 Benedum Hall, 3700 OHara Street, Pittsburgh, Pennsylvania 15261 (United States); McKeown, J. T.; LaGrange, T.; Reed, B. W.; Campbell, G. H. [Materials Science Division, Physical and Life Science Directorate, Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94551 (United States)

2016-08-07

In situ investigations of rapid solidification in polycrystalline Al thin films were conducted using nano-scale spatio-temporal resolution dynamic transmission electron microscopy. Differences in crystal growth rates and asymmetries in melt pool development were observed as the heat extraction geometry was varied by controlling the proximity of the laser-pulse irradiation and the associated induced melt pools to the edge of the transmission electron microscopy support grid, which acts as a large heat sink. Experimental parameters have been established to maximize the reproducibility of the material response to the laser-pulse-related heating and to ensure that observations of the dynamical behavior of the metal are free from artifacts, leading to accurate interpretations and quantifiable measurements with improved precision. Interface migration rate measurements revealed solidification velocities that increased consistently from ∼1.3 m s{sup −1} to ∼2.5 m s{sup −1} during the rapid solidification process of the Al thin films. Under the influence of an additional large heat sink, increased crystal growth rates as high as 3.3 m s{sup −1} have been measured. The in situ experiments also provided evidence for development of a partially melted, two-phase region prior to the onset of rapid solidification facilitated crystal growth. Using the experimental observations and associated measurements as benchmarks, finite-element modeling based calculations of the melt pool evolution after pulsed laser irradiation have been performed to obtain estimates of the temperature evolution in the thin films.

Increased water-use efficiency does not lead to enhanced tree growth under xeric and mesic conditions

NARCIS (Netherlands)

Lévesque, M.; Siegwolf, R.; Saurer, M.; Eilmann, B.; Rigling, A.

2014-01-01

Higher atmospheric CO2 concentrations (ca ) can under certain conditions increase tree growth by enhancing photosynthesis, resulting in an increase of intrinsic water-use efficiency (i WUE) in trees. However, the magnitude of these effects and their interactions with changing climatic conditions are

How to measure the economic impacts of changes in growth, feed efficiency and survival in aquaculture

NARCIS (Netherlands)

Kankainen, M.; Setala, J.; Berrill, I.K.; Ruohonen, K.; Noble, C.; Schneider, O.

2012-01-01

In this article we introduce a variety of bio-economic models that can be used to calculate the economic benefits associated with improved productivity in aquaculture. In the aquaculture industry, three important biological productivity factors are growth, survival and feed efficiency. The

Parameters Influencing the Growth of ZnO Nanowires as Efficient Low Temperature Flexible Perovskite-Based Solar Cells

Directory of Open Access Journals (Sweden)

Alex Dymshits

2016-01-01

Full Text Available Hybrid organic-inorganic perovskite has proved to be a superior material for photovoltaic solar cells. In this work we investigate the parameters influencing the growth of ZnO nanowires (NWs for use as an efficient low temperature photoanode in perovskite-based solar cells. The structure of the solar cell is FTO (SnO2:F-glass (or PET-ITO (In2O3·(SnO2 (ITO on, polyethylene terephthalate (PET/ZnAc seed layer/ZnO NWs/CH3NH3PbI3/Spiro-OMeTAD/Au. The influence of the growth rate and the diameter of the ZnO NWs on the photovoltaic performance were carefully studied. The ZnO NWs perovskite-based solar cell demonstrates impressive power conversion efficiency of 9.06% on a rigid substrate with current density over 21 mA/cm2. In addition, we successfully fabricated flexible perovskite solar cells while maintaining all fabrication processes at low temperature, achieving power conversion efficiency of 6.4% with excellent stability for over 75 bending cycles.

Prenatal bisphenol a urine concentrations and early rapid growth and overweight risk in the offspring.

Science.gov (United States)

Valvi, Damaskini; Casas, Maribel; Mendez, Michelle A; Ballesteros-Gómez, Ana; Luque, Noelia; Rubio, Soledad; Sunyer, Jordi; Vrijheid, Martine

2013-11-01

Increasing experimental evidence suggests that prenatal bisphenol A (BPA) exposure induces offspring weight gain, but these effects remain largely unexplored in humans. We examined the effects of prenatal BPA exposure on postnatal growth and obesity. BPA concentrations were measured in two spot-urine samples collected in the 1st and 3rd trimesters of pregnancy from mothers in a Spanish birth cohort study (n = 402). We used the average of the two creatinine-adjusted BPA concentrations as the exposure variable. Rapid child growth was defined as a weight gain Z score >0.67 in the first 6 months of life. Age- and sex-specific Z scores for body mass index (BMI) were calculated at age 14 months and 4 years, based on the World Health Organization referent; overweight was defined as a BMI Z score greater than or equal to the 85th percentile. Age- and sex-specific waist circumference Z scores were calculated at age 14 months and 4 years using the analysis population mean. Twenty-six percent of children were rapid growers; 25% were overweight at 14 months and 21% at 4 years. Geometric mean BPA concentrations were 2.6 μg/g creatinine (standard deviation = 2.3) in 1st trimester and 2.0 (2.3) in 3rd trimester samples (Pearson r = 0.13). At 4 years, BPA exposure was associated with increased waist circumference (β per log10 μg/g = 0.28 [95% confidence interval = 0.01 to 0.57]) and BMI (β = 0.28 [-0.06 to 0.63]). BPA was not associated with obesity-related outcomes at earlier ages. This study provides some evidence for an association between prenatal BPA exposure and obesity-related outcomes in childhood, although not in infancy. The large uncertainties in BPA exposure assessment require that findings be interpreted with caution.

A rapid and efficient two-step gel electrophoresis method for the purification of major rye grass pollen allergens.

Science.gov (United States)

Levy, D; Davies, J; O'Hehir, R; Suphioglu, C

2001-06-01

Purified proteins are mandatory for molecular, immunological and cellular studies. However, purification of proteins from complex mixtures requires specialised chromatography methods (i.e., gel filtration, ion exchange, etc.) using fast protein liquid chromatography (FPLC) or high-performance liquid chromatography (HPLC) systems. Such systems are expensive and certain proteins require two or more different steps for sufficient purity and generally result in low recovery. The aim of this study was to develop a rapid, inexpensive and efficient gel-electrophoresis-based protein purification method using basic and readily available laboratory equipment. We have used crude rye grass pollen extract to purify the major allergens Lol p 1 and Lol p 5 as the model protein candidates. Total proteins were resolved on large primary gel and Coomassie Brilliant Blue (CBB)-stained Lol p 1/5 allergens were excised and purified on a secondary "mini"-gel. Purified proteins were extracted from unstained separating gels and subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and immunoblot analyses. Silver-stained SDS-PAGE gels resolved pure proteins (i.e., 875 microg of Lol p 1 recovered from a 8 mg crude starting material) while immunoblot analysis confirmed immunological reactivity of the purified proteins. Such a purification method is rapid, inexpensive, and efficient in generating proteins of sufficient purity for use in monoclonal antibody (mAb) production, protein sequencing and general molecular, immunological, and cellular studies.

How much have electricity shortages hampered China's GDP growth?

International Nuclear Information System (INIS)

Cheng, Y.S.; Wong, W.K.; Woo, C.K.

2013-01-01

Based on an econometric analysis of the annual growth data for China's GDP and electricity generation from 1953 to 2010, we find that electricity generation growth Granger causes GDP growth, but not vice versa. We also find that the GDP elasticity of electricity generation is about 0.6, implying that a 1% increase in China's electricity generation growth would increase GDP growth by 0.6%. While Deng's reform raised China's GDP growth rate by about 5% per year, it did not alter the GDP elasticity of electricity generation. Hence, an obvious strategy to promote China's economic growth would be accelerating electricity generation expansion. Rapidly adding thermal generation units, however, could have large-scale, adverse environmental impacts. We therefore support China's 2011 five-year plan, which calls for expanding investments in renewable energy, conservation and energy efficiency as well as improving China's integrated electricity planning and cost-based pricing decisions. - Highlights: ► China's electricity generation growth is found to Granger cause GDP growth, but not vice versa. ► The estimate of the GDP elasticity of electricity generation is about 0.6. ► A 1% increase in China's electricity generation growth would increase GDP growth by 0.6%

Arbuscular mycorrhizal growth responses are fungal specific but do not differ between soybean genotypes with different phosphate efficiency.

Science.gov (United States)

Wang, Xiurong; Zhao, Shaopeng; Bücking, Heike

2016-07-01

Arbuscular mycorrhizal (AM) fungi play a key role in the phosphate (P) uptake of many important crop species, but the mechanisms that control their efficiency and their contribution to the P nutrition of the host plant are only poorly understood. The P uptake and growth potential of two soybean genotypes that differ in their root architectural traits and P acquisition efficiency were studied after colonization with different AM fungi and the transcript levels of plant P transporters involved in the plant or mycorrhizal P uptake pathway were examined. The mycorrhizal growth responses of both soybean genotypes ranged from highly beneficial to detrimental, and were dependent on the P supply conditions, and the fungal species involved. Only the colonization with Rhizophagus irregularis increased the growth and P uptake of both soybean genotypes. The expression of GmPT4 was downregulated, while the mycorrhiza-inducible P transporter GmPT10 was upregulated by colonization with R. irregularis Colonization with both fungi also led to higher transcript levels of the mycorrhiza-inducible P transporter GmPT9, but only in plants colonized with R. irregularis were the higher transcript levels correlated to a better P supply. The results suggest that AM fungi can also significantly contribute to the P uptake and growth potential of genotypes with a higher P acquisition efficiency, but that mycorrhizal P benefits depend strongly on the P supply conditions and the fungal species involved. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Rapid and Efficient Screening Method for Antibacterial Compound-Producing Bacteria.

Science.gov (United States)

Hettiarachchi, Sachithra; Lee, Su-Jin; Lee, Youngdeuk; Kwon, Young-Kyung; De Zoysa, Mahanama; Moon, Song; Jo, Eunyoung; Kim, Taeho; Kang, Do-Hyung; Heo, Soo-Jin; Oh, Chulhong

2017-08-28

Antibacterial compounds are widely used in the treatment of human and animal diseases. The overuse of antibiotics has led to a rapid rise in the prevalence of drug-resistant bacteria, making the development of new antibacterial compounds essential. This study focused on developing a fast and easy method for identifying marine bacteria that produce antibiotic compounds. Eight randomly selected marine target bacterial species ( Agrococcus terreus, Bacillus algicola, Mesoflavibacter zeaxanthinifaciens, Pseudoalteromonas flavipulchra, P. peptidolytica, P. piscicida, P. rubra , and Zunongwangia atlantica ) were tested for production of antibacterial compounds against four strains of test bacteria ( B. cereus, B. subtilis, Halomonas smyrnensis , and Vibrio alginolyticus ). Colony picking was used as the primary screening method. Clear zones were observed around colonies of P. flavipulchra, P. peptidolytica, P. piscicida , and P. rubra tested against B. cereus, B. subtilis , and H. smyrnensis . The efficiency of colony scraping and broth culture methods for antimicrobial compound extraction was also compared using a disk diffusion assay. P. peptidolytica, P. piscicida , and P. rubra showed antagonistic activity against H. smyrnensis, B. cereus , and B. subtilis , respectively, only in the colony scraping method. Our results show that colony picking and colony scraping are effective, quick, and easy methods of screening for antibacterial compound-producing bacteria.

The impact of economic growth on environmental efficiency of the electricity sector: A hybrid window DEA methodology for the USA.

Science.gov (United States)

Halkos, George E; Polemis, Michael L

2018-04-01

This paper estimates the efficiency of the power generation sector in the USA by using Window Data Envelopment Analysis (W-DEA). We integrate radial and non-radial efficiency measurements in DEA using the hybrid measure while we extend the proposed model by considering good and undesirable outputs as separable and non separable. Then in the second stage, we perform parametric and non-parametric econometric techniques in order to model the relationship between the calculated environmental efficiencies and economic growth in attaining sustainability. Our empirical findings indicate a stable N-shape relationship between environmental efficiency and regional economic growth in the case of global and total pollutants but an inverted N-shape in the case of local pollutants. This implies that attention is required when considering local and global pollutants and the extracted environmental efficiency scores. A clear message to policy makers and government officials is that climate change which calls for economic, environmental and social concern should be analyzed according to its dispersion and regional dimension. Copyright © 2018 Elsevier Ltd. All rights reserved.

Country’s Welfare as an Efficiency Factor in Fiscal Policy Promoting Economig Growth

Directory of Open Access Journals (Sweden)

Ushakov Denis

2017-06-01

Full Text Available The main problem of this study is an assessment of the current role of national tax regime in overcoming an injustice of national profit distribution, as well as in economic development stimulating in poor and wealthy countries. In this article the authors study the correlation between the dynamics of taxation regimes’ components and the macroeconomic indices of the countries’ worldwide so that to classify the countries into groups depending on the level of their welfare. Therefore, the article presents the authors’ conclusions concerning the efficiency of fiscal instruments for economic growth stimulation and external trade attractiveness increase as applied to the majority of contemporary states. Research proved a taxation effect in countries’ macro-economic growth and external attractive-ness stimulating, as well as this effect dependence on the level of countries material well-being and infrastructural conditions

Effects of thinning and mixed plantations with Alnus cordata on growth and efficiency of common walnut (Juglans regia L.

Directory of Open Access Journals (Sweden)

Giannini T

2009-01-01

Full Text Available Results about the effects of thinning and mixed plantations with Italian alder (Alnus cordata Loisel. on growth and efficiency of common walnut (Juglans regia L. plantations for wood production are reported. The study, carried out for six years on sixteen year old plantations, compared three theses: pure common walnut plantation (pure common walnut; 50% common walnut - 50% Italian alder plantation; 25% common walnut - 75% Italian alder plantation. Beyond annual surveys of girth at breast height, total height, stem volume and biomass, several variables, useful to describe canopy and foliage characteristics such as leaf area index (LAI, leaf biomass and photosynthetic active radiation below the canopy, were recorded. Data collected allowed to compare growth at individual and whole stand level, to calculate the net assimilation rate (NAR and to compare the growth efficiency of the three theses. Mixed plantations performed results significantly higher than the pure plantation in terms of growth, LAI and leaf biomass both before and after experimental thinning. With reference only to common walnut, growth in mixed plantations was higher than the pure plantation with differences ranging from +40% to +100%. More relevant differences among pure common walnut, 50% common walnut and 25% common walnut at canopy and foliage characteristics were observed, with LAI values of 1.07, 3.96 e 4.35 m2 m-2 respectively. Results accounted for a general positive effect of Italian alder as accessory tree species on growth and efficiency of mixed plantations, mainly due to the good performances induced in common walnut trees. Such performances were enabled by the good ecological integration between the two species and by the positive effects of N-fixing activity of Italian alder. Experimental thinning applied, although heavy, did not biased the dynamics observed before thinning both in pure and mixed plantations. In addition, they had positive effects on common walnut

Explaining growth of individual trees: Light interception and efficiency of light use by Eucalyptus at four sites in Brazil

Science.gov (United States)

Dan Binkley; Jose Luiz Stape; William L. Bauerle; Michael G. Ryan

2010-01-01

The growth of wood in trees and forests depends on the acquisition of resources (light, water, and nutrients), the efficiency of using resources for photosynthesis, and subsequent partitioning to woody tissues. Patterns of efficiency over time for individual trees, or between trees at one time, result from changes in rates photosynthesis and shifts in...

A highly efficient 3D level-set grain growth algorithm tailored for ccNUMA architecture

Science.gov (United States)

Mießen, C.; Velinov, N.; Gottstein, G.; Barrales-Mora, L. A.

2017-12-01

A highly efficient simulation model for 2D and 3D grain growth was developed based on the level-set method. The model introduces modern computational concepts to achieve excellent performance on parallel computer architectures. Strong scalability was measured on cache-coherent non-uniform memory access (ccNUMA) architectures. To achieve this, the proposed approach considers the application of local level-set functions at the grain level. Ideal and non-ideal grain growth was simulated in 3D with the objective to study the evolution of statistical representative volume elements in polycrystals. In addition, microstructure evolution in an anisotropic magnetic material affected by an external magnetic field was simulated.

Genetic and phenotypic relationships of feed intake and measures of efficiency with growth and carcass merit of beef cattle.

Science.gov (United States)

Nkrumah, J D; Basarab, J A; Wang, Z; Li, C; Price, M A; Okine, E K; Crews, D H; Moore, S S

2007-10-01

Feed intake and efficiency of growth are economically important traits of beef cattle. This study determined the relationships of daily DMI, feed:gain ratio [F:G, which is the reciprocal of the efficiency of gain (G:F) and therefore increases as the efficiency of gain decreases and vice versa, residual feed intake (RFI), and partial efficiency of growth (efficiency of ADG, PEG) with growth and carcass merit of beef cattle. Residual feed intake was calculated from phenotypic regression (RFIp) or genetic regression (RFIg) of ADG and metabolic BW on DMI. An F1 half-sib pedigree file containing 28 sires, 321 dams, and 464 progeny produced from crosses between Alberta Hybrid cows and Angus, Charolais, or Alberta Hybrid bulls was used. Families averaged 20 progeny per sire (range = 3 to 56). Performance, ultrasound, and DMI data was available on all progeny, of which 381 had carcass data. Phenotypic and genetic parameters were obtained using SAS and ASREML software, respectively. Differences in RFIp and RFIg, respectively, between the most and least efficient steers (i.e., steers with the lowest PEG) were 5.59 and 6.84 kg of DM/d. Heritabilities for DMI, F:G, PEG, RFIp, and RFIg were 0.54 +/- 0.15, 0.41 +/- 0.15, 0.56 +/- 0.16, 0.21 +/- 0.12, and 0.42 +/- 0.15, respectively. The genetic (r = 0.92) and phenotypic (r = 0.97) correlations between RFIp and RFIg indicated that the 2 indices are very similar. Both indices of RFI were favorably correlated phenotypically (P 0.50), but only DMI had strong genetic (r = 0.87 +/- 0.10) and phenotypic (r = 0.65) correlations with metabolic BW. Generally, the phenotypic and genetic correlations of RFI with carcass merit were not different from zero, except genetic correlations of RFI with ultrasound and carcass LM area and carcass lean yield and phenotypic correlations of RFI with backfat thickness (P < 0.01). Daily DMI had moderate to high phenotypic (P < 0.01) and genetic correlations with all the ultrasound and carcass traits

[Effect of five fungicides on growth of Glycyrrhiza uralensis and efficiency of mycorrhizal symbiosis].

Science.gov (United States)

Li, Peng-ying; Yang, Guang; Zhou, Xiu-teng; Zhou, Liane-yun; Shao, Ai-juan; Chen, Mei-lan

2015-12-01

In order to obtain the fungicides with minimal impact on efficiency of mycorrhizal symbiosis, the effect of five fungicides including polyoxins, jinggangmycins, thiophanate methylate, chlorothalonil and carbendazim on the growth of medicinal plant and efficiency of mycorrhizal symbiosis were studied. Pot cultured Glycyrrhiza uralensis was treated with different fungicides with the concentration that commonly used in the field. 60 d after treated with fungicides, infection rate, infection density, biomass indexes, photosyn- thetic index and the content of active component were measured. Experimental results showed that carbendazim had the strongest inhibition on mycorrhizal symbiosis effect. Carbendazim significantly inhibited the mycorrhizal infection rate, significantly suppressed the actual photosynthetic efficiency of G. uralensis and the most indicators of biomass. Polyoxins showed the lowest inhibiting affection. Polyoxins had no significant effect on mycorrhizal infection rate, the actual photosynthetic efficiency of G. uralensis and the most indicators of biomass. The other three fungicides also had an inhibitory effect on efficiency of mycorrhizal symbiosis, and the inhibition degrees were all between polyoxins's and carbendazim's. The author considered that fungicide's inhibition degree on mycorrhizal effect might be related with the species of fungicides, so the author suggested that the farmer should try to choose bio-fungicides like polyoxins.

Selection of efficient salt-tolerant bacteria containing ACC deaminase for promotion of tomato growth under salinity stress

Directory of Open Access Journals (Sweden)

Kannika Chookietwattana* and Kedsukon Maneewan

2012-05-01

Full Text Available For successful application of plant growth promoting bacteria (PGPB in salt-affected soil, bioinoculant with salt-tolerant property is required in order to provide better survival and perform well in the field. The present study aimed to select the most efficient salt-tolerant bacterium containing 1-aminocyclopropane-1-carboxylic acid (ACC deaminase from eighty four bacterial strains and to investigate the effects of the selected bacterium on the germination and growth of tomato (Licopersicon esculentum Mill. cv. Seeda under saline conditions. The Bacillus licheniformis B2r was selected for its ability to utilize ACC as a sole nitrogen source under salinity stress. It also showed a high ACC deaminase activity at 0.6 M NaCl salinity. Tomato plants inoculated with the selected bacterium under various saline conditions (0, 30, 60, 90 and 120 mM NaCl revealed a significant increase in the germination percentage, germination index, root length, and seedling dry weight especially at salinity levels ranging from 30-90 mM NaCl. The work described in this report is an important step in developing an efficient salt-tolerant bioinoculant to facilitate plant growth in saline soil.

Rapid growth of black holes accompanied with hot or warm outflows exposed to anisotropic super-Eddington radiation

Science.gov (United States)

Takeo, Eishun; Inayoshi, Kohei; Ohsuga, Ken; Takahashi, Hiroyuki R.; Mineshige, Shin

2018-05-01

We perform two-dimensional radiation hydrodynamical simulations of accretion flows on to a black hole (BH) with a mass of 103 ≤ MBH/ M⊙ ≲ 106 in order to study rapid growth of BHs in the early Universe. For spherically symmetric flows, hyper-Eddington accretion from outside the Bondi radius can occur unimpeded by radiation feedback when MBH ≳ 104 M⊙(n∞/105 cm - 3) - 1(T∞/104 K)3/2, where the density and temperature of ambient gas are initially set to n∞ = 105 cm-3 and T∞ = 104 K. Here, we study accretion flows exposed to anisotropic radiation from a nuclear accretion disc with a luminosity higher than the Eddington value (LEdd) due to collimation towards the bipolar directions. We find that, unlike the spherically symmetric case, even less massive BHs with MBH ionized regions expand towards the poles producing hot outflows with T ˜ 105 K. For more massive BHs with MBH ≳ 5 × 105 M⊙, intense inflows of neutral gas through the equator totally cover the central radiating region due to the non-radial gas motions. Because of efficient recombination by hydrogen, the entire flow settles in neutral and warm gas with T ≃ 8000 K. The BH is fed at a rate of ˜5 × 104LEdd/c2 (a half of the inflow rate from the Bondi radius). Moreover, radiation momentum absorbed by neutral hydrogen produces warm outflows towards the bipolar directions at ˜ 10 per cent of the BH feeding rate and with a velocity several times higher than the escaping value.

[F-18] halofluorination: A rapid and efficient method for the incorporation of radiofluorine into organic molecules

International Nuclear Information System (INIS)

Chi, D.Y.; Katzenellenbogen, J.A.; Kilbourn, M.R.; Welch, M.J.

1985-01-01

The addition of halogen fluoride to olefins (Hal-F, halofluorination, where Hal is Br or I) is a more favorable reaction for labeling with tracer levels of F-18 than is addition of hydrogen fluoride (H-F, hydrofluorination), because of the more productive soft acid-soft base interaction between the Hal and the olefin. The authors have found that simple olefins (allylbenzene, 1-hexene, 1-propene) undergo rapid bromofluorination when treated with 1,3-dibromo-5,5-dimethylhydantoin (DBH), giving a 7:1 mixture of Markownikow (M) and anti-Markownikow (AM) adducts. In chlorinated solvents, the reaction is rapid and efficient, giving yields of 50-90% based on fluoride as limiting reagent. The products can be reduced to the fluorocarbon by debromination (R/sub 3/SnH or LiAlH/sub 4/), or they can be used to alkylate amines. Reasonable radiochemical yields can be obtained using F-18 produced in a water target [/sup 18/O(p,n)/sup 18/F], in either carrier-added (20-50%) or no-carrier-added (ca. 10-20%) modes. This reaction is being used to prepare F-18 labeled radiopharmaceuticals

State policy as a driver of innovation to support economic growth: California energy-efficiency policy (1975-2005)

Science.gov (United States)

Klementich, Eloisa Y.

2011-12-01

Purpose. The purpose of this research was to identify whether a relationship exists between state energy-efficiency policy and innovation in the State of California and to shed light on the impact that energy-efficiency policy can have on supporting statewide economic development goals. Theoretical Framework. The theoretical framework drew from foundations in neoclassical economic theory, technology change theory, and new growth theory. Together these theories formed the basis to describe the impacts caused by the innovations within the market economy. Under this framework, policy-generated innovations are viewed to be translated into efficiency and productivity that propel economic benefits. Methodological Considerations. This study examined various economic indices and efficiency attainment indices affecting four home appliances regulated under Title 20's energy-efficiency standard established by the California Energy Commission, Warren Alquist Act. The multiple regression analysis performed provided an understanding of the relationship between the products regulated, the regulation standard, and the policy as it relates to energy-efficiency regulation. Findings. There is enough evidence to show that strategies embedded in the Warren Alquist Act, Title 20 do drive innovation. Three of the four product categories tested showed statistical significance in the policy standard resulting in an industry efficiency improvement. Conclusively, the consumption of electricity per capita in California has positively diverged over a 35-year period from national trends, even though California had mirrored the nation in income and family size during the same period, the only clear case of divergence is the state's action toward a different energy policy. Conclusions and Recommendations. California's regulations propelled manufacturers to reach higher efficiency levels not otherwise pursued by market forces. The California effort included alliances all working together to make

Different measures of energetic efficiency and their phenotypic relationships with growth, feed intake, and ultrasound and carcass merit in hybrid cattle.

Science.gov (United States)

Nkrumah, J D; Basarab, J A; Price, M A; Okine, E K; Ammoura, A; Guercio, S; Hansen, C; Li, C; Benkel, B; Murdoch, B; Moore, S S

2004-08-01

Residual feed intake (RFI) has been proposed as an index for determining beef cattle energetic efficiency. Although the relationship of RFI with feed conversion ratio (FCR) is well established, little is known about how RFI compares to other measures of efficiency. This study examined the phenotypic relationships among different measures of energetic efficiency with growth, feed intake, and ultrasound and carcass merit of hybrid cattle (n = 150). Dry matter intake, ME intake (MEI), ADG, metabolic weight (MWT), and FCR during the test averaged 10.29 kg/d (SD = 1.62), 1,185.45 kJ/(kg0.75 x d) (SD = 114.69), 1.42 kg/d (SD = 0.25), 86.67 kg0.75 (SD = 10.21), and 7.27 kg of DM/kg of gain (SD = 1.00), respectively. Residual feed intake averaged 0.00 kg/d and ranged from -2.25 kg/d (most efficient) to 2.61 kg/d (least efficient). Dry matter intake (r = 0.75), MEI (r = 0.83), and FCR (r = 0.62) were correlated with RFI (P 0.5 SD) RFI vs. those with medium (+/-0.5 SD) or low (<0.5 SD) RFI (P < 0.001). Partial efficiency of growth (PEG; energetic efficiency for ADG) was correlated with RFI (r = -0.89, P < 0.001) and was lower (P < 0.001) for high- vs. medium- or low-RFI animals. However, RFI was not related to ADG (r = -0.03), MWT (r = -0.02), relative growth rate (RGR; growth relative to instantaneous body size; r = -0.04), or Kleiber ratio (KR; ADG per unit of MWT; r = -0.004). Also, DMI was correlated (P < 0.01) with ADG (r = 0.66), MWT (r = 0.49), FCR (r = 0.49), PEG (r = -0.52), RGR (r = 0.18), and KR (r = 0.36). Additionally, FCR was correlated (P < 0.001) with ADG (r = -0.63), PEG (r = -0.83), RGR (r = -0.75), and KR (r = -0.73), but not with MWT (r = 0.07). Correlations of measures of efficiency with ultrasound or carcass traits generally were not different from zero except for correlations of RFI, FCR, and PEG, respectively, with backfat gain (r = 0.30, 0.20, and -0.30), ultrasound backfat (r = 0.19, 0.21, and -0.25), grade fat (r = 0.25, 0.19, and -0.27), lean meat

Relative efficiency and productivity: a preliminary exploration of public hospitals in Beijing, China.

Science.gov (United States)

Li, Hao; Dong, Siping; Liu, Tingfang

2014-04-06

Third-grade hospitals in Beijing have been rapidly developing in capacity and scale for many years. These hospitals receive a large number of patients, and ensuring their efficient operation is crucial in meeting people's healthcare needs. In this context, a study of their relative efficiency and productivity would be helpful to identify the driving factors and further improve their performance. After a review of literature, the current numbers of open beds and employees were selected as input variables. The number of outpatient and emergency visits and the number of discharged patients were selected as output variables. A total of 12 third-grade Class A general public hospitals in Beijing were selected for a preliminary study. The panel data from 2006-2009 were collected by the National Institute of Hospital Administration, Ministry of Health of P.R. China. Descriptive analysis and data envelopment analysis were used to analyze the data using Stata 10.0 and DEAP(V2.1) software. In the 2006-2009 period, descriptive results show that sample hospitals continuously expanded their capacity and scale, with growth rate of total revenue being the highest among all variables. The DEA results show that the average annual growth rate of productivity was 26.7%, and the rates were 47.3%, 21.3% and 13.8% respectively for two consecutive years. The average annual growth rate of technological change was 28.3%, and the rates were 49.4%, 21.5% and 16.4% respectively for two consecutive years. The average annual growth rate of technical efficiency change was -1.3%, and the rates were -1.4%, -0.02% and -2.2% respectively for two consecutive years. The sample hospitals in Beijing experienced substantial productivity growth, but annual growth rates were declining. Substantial technological change was the main contributor to the growth. Although some hospitals exhibited improvements in technical efficiency, there was a slight decline in general. To improve overall efficiency and

Relative efficiency and productivity: a preliminary exploration of public hospitals in Beijing, China

Science.gov (United States)

2014-01-01

Background Third-grade hospitals in Beijing have been rapidly developing in capacity and scale for many years. These hospitals receive a large number of patients, and ensuring their efficient operation is crucial in meeting people’s healthcare needs. In this context, a study of their relative efficiency and productivity would be helpful to identify the driving factors and further improve their performance. Methods After a review of literature, the current numbers of open beds and employees were selected as input variables. The number of outpatient and emergency visits and the number of discharged patients were selected as output variables. A total of 12 third-grade Class A general public hospitals in Beijing were selected for a preliminary study. The panel data from 2006–2009 were collected by the National Institute of Hospital Administration, Ministry of Health of P.R. China. Descriptive analysis and data envelopment analysis were used to analyze the data using Stata 10.0 and DEAP(V2.1) software. Results In the 2006–2009 period, descriptive results show that sample hospitals continuously expanded their capacity and scale, with growth rate of total revenue being the highest among all variables. The DEA results show that the average annual growth rate of productivity was 26.7%, and the rates were 47.3%, 21.3% and 13.8% respectively for two consecutive years. The average annual growth rate of technological change was 28.3%, and the rates were 49.4%, 21.5% and 16.4% respectively for two consecutive years. The average annual growth rate of technical efficiency change was -1.3%, and the rates were -1.4%, -0.02% and -2.2% respectively for two consecutive years. Conclusions The sample hospitals in Beijing experienced substantial productivity growth, but annual growth rates were declining. Substantial technological change was the main contributor to the growth. Although some hospitals exhibited improvements in technical efficiency, there was a slight decline in

Rapid growth of amorphous carbon films on the inner surface of micron-thick and hollow-core fibers

Energy Technology Data Exchange (ETDEWEB)

Ji, Longfei [Fujian Key Laboratory for Plasma and Magnetic Resonance, Department of Electric Science, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China); School of Science, Changchun University of Science and Technology, Changchun, Jilin 130022 (China); Liu, Dongping, E-mail: Dongping.liu@dlnu.edu.cn [Fujian Key Laboratory for Plasma and Magnetic Resonance, Department of Electric Science, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China); School of Science, Changchun University of Science and Technology, Changchun, Jilin 130022 (China); Zhou, Xinwei [Department of Mechanical Engineering, Zhejiang University, Zhejiang 310007 (China); Song, Ying [School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China); School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116023 (China); Ni, Weiyuan [School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China); School of Science, Changchun University of Science and Technology, Changchun, Jilin 130022 (China); Niu, Jinhai; Fan, Hongyu [School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China)

2013-10-01

Ultrathick (> 25 μm) carbon films were obtained on the inner surface of hollow and micron-thick quartz fibers by confining CH{sub 4}/He or C{sub 2}H{sub 2}/He microplasmas in their hollow cores. The resulting carbon films were studied by using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The microplasma-enhanced chemical vapor deposition (CVD) technique resulted in the uniform growth of amorphous carbon films on the inner surface of very long (> 1 m) hollow-core fibers. Film deposition is performed by using microplasmas at atmospheric pressure and at 50 Pa. The carbon films obtained with the latter show the smooth inner surfaces and the well continuity across the film/optical fiber. Low-pressure CH{sub 4}/He and C{sub 2}H{sub 2}/He microplasmas can lead to a rapid growth (∼ 2.00 μm/min) of carbon films with their thickness of > 25 μm. The optical emission measurements show that various hydrocarbon species were formed in these depositing microplasmas due to the collisions between CH{sub 4}/C{sub 2}H{sub 2} molecules and energetic species. The microplasma-enhanced CVD technique running without the complicated fabrication processes shows its potentials for rapidly depositing the overlong carbon tubes with their inner diameters of tens of microns. - Highlights: • The microplasma device is applied for coating deposition inside hollow-core fibers. • The microplasma device results in > 25 μm-thick carbon films. • The microplasma device is simple for deposition of ultralong carbon tubes.

Growth and Efficiency of Small Scale Industry and its Impact on Economic Development of Sindh

Directory of Open Access Journals (Sweden)

Mumtaz Ali Junejo

2008-09-01

Full Text Available The purpose of this study is to analyze the growth, efficiency, causes of sickness of small scale industry, emergence of entrepreneur and competencies of entrepreneurs at Larkana estate area of Sindh Province. The study examines the educational background of the entrepreneurs of small scale industry who are the helm of affairs and its impact on the growth of sales of the every year. Strong evidence emerges that owners of small industrial units are family concern and having a low educational background, lack of managerial knowledge and conservation-oriented attitude results in under utilization of capacity and low growth of units established every year. This research paper provides a survey of the theoretical and empirical literature relating to promote the small scale industry in the Larkana region. This study indicates effective policy measures to promote the small scale industry particularly in Larkana region and generally in Pakistan.

Tomato Yield and Water Use Efficiency - Coupling Effects between Growth Stage Specific Soil Water Deficits

DEFF Research Database (Denmark)

Chen, Si; Zhenjiang, Zhou; Andersen, Mathias Neumann

2015-01-01

To investigate the sensitivity of tomato yield and water use efficiency (WUE) to soil water content at different growth stages, the central composite rotatable design (CCRD) was employed in a five-factor-five-level pot experiment under regulated deficit irrigation. Two regression models concerning...... the effects of stage-specific soil water content on tomato yield and WUE were established. The results showed that the lowest available soil water (ASW) content (around 28%) during vegetative growth stage (here denoted θ1) resulted in high yield and WUE. Moderate (around 69% ASW) during blooming and fruit...... effects of ASW in two growth stages were between θ2 and θ5, θ3. In both cases a moderate θ2 was a precondition for maximum yield response to increasing θ5 and θ3. Sensitivity analysis revealed that yield was most sensitive to soil water content at fruit maturity (θ5). Numerical inspection...

The Growth Rate and Efficiency of Rumen Microbial Protein Digestion of Red Clover Silage (Trifolium pratense cv. Sabatron)

International Nuclear Information System (INIS)

Asih Kurniawati

2004-01-01

(Trifolium pratense cv. Sabatron). Red clover silage supplemented with different level of carbohydrates has been examined using the in-vitro gas production technique. Cumulative gas production, hydro.gen sulfite production, and ammonia was followed and used as indicators of microbial growth rate and extent of protein degradation. Microbial nitrogen production, VFA, and efficiency microbial production was used as indicator of nitrogen use efficiency. 15 N was used as a microbial marker to estimate the amount of nitrogen incorporation into microbial protein. Supplementation of Red clover with increasing 5 levels; 0 g; 0.625 g; 0.15 g; 0.225 g and 0.3 g of maize starch led to graded increase in microbial growth and protein degradation. This was reflected in the increasing gas production and the accumulation of hydrogen sulfite. Diurnal change in ammonia production reflected the microbial utilization of ammonia for protein synthesis. Protein microbe (P<0.001) as VFA (P<0.001) increased due to carbohydrate addition as well as utilization of nitrogen (P<0.001). There was also the efficiency of nitrogen utilization which increased significantly. This result suggested that energy supply can increased efficiency of nitrogen use in the rumen and may reduce nitrogen losses into the environment. (author)

Rapid, all-optical crystal orientation imaging of two-dimensional transition metal dichalcogenide monolayers

International Nuclear Information System (INIS)

David, Sabrina N.; Zhai, Yao; Zande, Arend M. van der; O'Brien, Kevin; Huang, Pinshane Y.; Chenet, Daniel A.; Hone, James C.; Zhang, Xiang; Yin, Xiaobo

2015-01-01

Two-dimensional (2D) atomic materials such as graphene and transition metal dichalcogenides (TMDCs) have attracted significant research and industrial interest for their electronic, optical, mechanical, and thermal properties. While large-area crystal growth techniques such as chemical vapor deposition have been demonstrated, the presence of grain boundaries and orientation of grains arising in such growths substantially affect the physical properties of the materials. There is currently no scalable characterization method for determining these boundaries and orientations over a large sample area. We here present a second-harmonic generation based microscopy technique for rapidly mapping grain orientations and boundaries of 2D TMDCs. We experimentally demonstrate the capability to map large samples to an angular resolution of ±1° with minimal sample preparation and without involved analysis. A direct comparison of the all-optical grain orientation maps against results obtained by diffraction-filtered dark-field transmission electron microscopy plus selected-area electron diffraction on identical TMDC samples is provided. This rapid and accurate tool should enable large-area characterization of TMDC samples for expedited studies of grain boundary effects and the efficient characterization of industrial-scale production techniques

Growth temperature dependence of Si doping efficiency and compensating deep level defect incorporation in Al0.7Ga0.3N

International Nuclear Information System (INIS)

Armstrong, Andrew M.; Moseley, Michael W.; Allerman, Andrew A.; Crawford, Mary H.; Wierer, Jonathan J.

2015-01-01

The growth temperature dependence of Si doping efficiency and deep level defect formation was investigated for n-type Al 0.7 Ga 0.3 N. It was observed that dopant compensation was greatly reduced with reduced growth temperature. Deep level optical spectroscopy and lighted capacitance-voltage were used to understand the role of acceptor-like deep level defects on doping efficiency. Deep level defects were observed at 2.34 eV, 3.56 eV, and 4.74 eV below the conduction band minimum. The latter two deep levels were identified as the major compensators because the reduction in their concentrations at reduced growth temperature correlated closely with the concomitant increase in free electron concentration. Possible mechanisms for the strong growth temperature dependence of deep level formation are considered, including thermodynamically driven compensating defect formation that can arise for a semiconductor with very large band gap energy, such as Al 0.7 Ga 0.3 N

Opportunities for green growth; Vihreaen kasvun mahdollisuudet

Energy Technology Data Exchange (ETDEWEB)

Antikainen, R.; Mickwitz, P.; Seppaelae, J. [and others

2013-03-15

The report seeks an answer to the question as to the kind of policy decisions (steps) by which preconditions for green growth may be created in Finland. The proposed steps are based on a review of earlier research and studies relating to Finland's key consumption and production systems (food, housing, transport and energy) and to certain path finding countries in terms of the green economy (the Netherlands, Germany, Sweden, Brazil). In addition, the report examines various models by which systemic change towards a green economy may be supported. The report also highlights successful examples of green business activity and measures to promote green growth. Green Growth is defined as low-carbon, resource-efficient economic growth based on safeguarding the functional capacity of ecosystems while promoting wellbeing and social justice. Green growth is considered to have significant worldwide potential, which is currently evident particularly in the rapid growth of cleantech demand. Successful future actors will be more material- and energy-efficient than their competitors, and they will be able to provide services and products flexibly for a low-carbon society. There are opportunities for green growth in all sectors of society. Green growth may consist of an entirely new kind of business activity and create new companies, but there are also opportunities in our traditional energy- and resource-intensive industries. Companies have a key role in growth, but realising green growth also requires changes in consumption. Central, regional and local government will act as facilitators in creating the preconditions for green growth. The report presents a number of policy measures and processes by which Finland can support green growth. Proposals for steps towards green growth include: (A.) Creating preconditions for green growth through a joint vision and political commitment. (B.) Stimulating companies' green growth potential and boosting green demand. (C

Solvent engineering for high-quality perovskite solar cell with an efficiency approaching 20%

Science.gov (United States)

Wu, Tongyue; Wu, Jihuai; Tu, Yongguang; He, Xin; Lan, Zhang; Huang, Miaoliang; Lin, Jianming

2017-10-01

The perovskite layer is the most crucial factor for the high performance perovskite solar cells. Based on solvent engineering, we develop a ternary-mixed-solvent method for the growth of high-quality [Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3] cation-anion-mixed perovskite films by introducing N-methyl-2-pyrrolidone (NMP) into the precursor mixed solution. By controlling rapid nucleation and retarding crystal growth via intermediate phase PbI2-NMP (Lewis acid-base adduct), a dense, large grain, pinhole-free and long charge carrier lifetime perovskite film is obtained. By optimizing the precursor solvent composition, the perovskite solar cell achieves an impressive power conversion efficiency of 19.61% under one-sun illumination. The research presented here provides a facile, low-cost and highly efficient way for the preparation of perovskite solar cells.

Leptin stimulates aromatase in the growth plate: limiting catch-up growth efficiency.

Science.gov (United States)

Masarwi, Majdi; Shamir, Raanan; Phillip, Moshe; Gat-Yablonski, Galia

2018-06-01

Catch-up growth (CUG) in childhood is defined as periods of growth acceleration, after the resolution of growth attenuation causes, bringing the children back to their original growth trajectory. Sometimes, however, CUG is incomplete, leading to permanent growth deficit and short stature. The aim of this study was to investigate the mechanisms that limit nutritional-CUG. Specifically, we focused on the crosstalk between leptin, increased by re-feeding, and sex hormones, which increase with age. In vivo studies were performed in young male Sprague Dawley rats fed ad libitum or subjected to 10/36 days of 40% food restriction followed by 90-120 days of re-feeding. In vitro studies were performed on ATDC5 cells. Analyses of mRNA and protein levels were done using qPCR and Western blot, respectively. CUG was complete in body weight and humerus length in animals that were food-restricted for 10 days but not for those food-restricted for 36 days. In vitro studies showed that leptin significantly increased aromatase gene expression and protein level as well as the expression of estrogen and leptin receptors in a dose- and time-dependent manner. The effect of leptin on aromatase was direct and was mediated through the MAPK/Erk, STAT3 and PI3K pathways. The crosstalk between leptin and aromatase in the growth plate suggests that re-feeding during puberty may lead to increased estrogen level and activity, and consequently, irreversible premature epiphyseal growth plate closure. These results may have important implications for the development of novel treatment strategies for short stature in children. © 2018 Society for Endocrinology.

Completely oriented anatase TiO2 nanoarrays: topotactic growth and orientation-related efficient photocatalysis

Science.gov (United States)

Yang, Jingling; Wu, Qili; He, Shiman; Yan, Jing; Shi, Jianying; Chen, Jian; Wu, Mingmei; Yang, Xianfeng

2015-08-01

A TiO2 film has been facilely grown on a Ti foil via a general and simple acid vapor oxidation (AVO) strategy. Based on detailed characterization by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), we found that the TiO2 film was composed of anatase nanoarrays highly oriented along their direction, resulting in a large exposed {001} top surface on the film. The growth mechanism based on a topotactic transformation was proposed according to a careful study of time-dependent experimental results. Resulting from the evaluation of photocatalytic performance compared with a commercial TiO2 photocatalyst (Degussa P25), the as-prepared oriented anatase TiO2 film showed higher efficiency for degradation of atrazine and acid orange II (AOII). The performance of photocatalysis is highly relevant to the preferential orientation. The efficient photocatalysis could be attributed to the highly reactive {001} facets on the anatase nanoarrays with super-hydrophilicity.A TiO2 film has been facilely grown on a Ti foil via a general and simple acid vapor oxidation (AVO) strategy. Based on detailed characterization by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), we found that the TiO2 film was composed of anatase nanoarrays highly oriented along their direction, resulting in a large exposed {001} top surface on the film. The growth mechanism based on a topotactic transformation was proposed according to a careful study of time-dependent experimental results. Resulting from the evaluation of photocatalytic performance compared with a commercial TiO2 photocatalyst (Degussa P25), the as-prepared oriented anatase TiO2 film showed higher efficiency for degradation of atrazine and acid orange II (AOII). The performance of photocatalysis is highly relevant to the preferential orientation. The efficient photocatalysis could be attributed to the highly reactive {001

Effect of dietary taurine supplementation on growth, feed efficiency, and nutrient composition of juvenile sablefish (Anoplopoma fimbria)

Science.gov (United States)

Juvenile sablefish were fed a low taurine, basal feed with seven graded levels of supplemental taurine to determine taurine requirements for growth and feed efficiency. The basal feed was plant based, formulated primarily with soy and corn proteins with a minimal (9%) amount of fishmeal. The unsuppl...

Incorporating an extended dendritic growth model into the CAFE model for rapidly solidified non-dilute alloys

International Nuclear Information System (INIS)

Ma, Jie; Wang, Bo; Zhao, Shunli; Wu, Guangxin; Zhang, Jieyu; Yang, Zhiliang

2016-01-01

We have extended the dendritic growth model first proposed by Boettinger, Coriell and Trivedi (here termed EBCT) for microstructure simulations of rapidly solidified non-dilute alloys. The temperature-dependent distribution coefficient, obtained from calculations of phase equilibria, and the continuous growth model (CGM) were adopted in the present EBCT model to describe the solute trapping behaviors. The temperature dependence of the physical properties, which were not used in previous dendritic growth models, were also considered in the present EBCT model. These extensions allow the present EBCT model to be used for microstructure simulations of non-dilute alloys. The comparison of the present EBCT model with the BCT model proves that the considerations of the distribution coefficient and physical properties are necessary for microstructure simulations, especially for small particles with high undercoolings. Finally, the EBCT model was incorporated into the cellular automaton-finite element (CAFE) model to simulate microstructures of gas-atomized ASP30 high speed steel particles that were then compared with experimental results. Both the simulated and experimental results reveal that a columnar dendritic microstructure preferentially forms in small particles and an equiaxed microstructure forms otherwise. The applications of the present EBCT model provide a convenient way to predict the microstructure of non-dilute alloys. - Highlights: • A dendritic growth model was developed considering non-equilibrium distribution coefficient. • The physical properties with temperature dependence were considered in the extended model. • The extended model can be used to non-dilute alloys and the extensions are necessary in small particles. • Microstructure of ASP30 steel was investigated using the present model and verified by experiment.

Incorporating an extended dendritic growth model into the CAFE model for rapidly solidified non-dilute alloys

Energy Technology Data Exchange (ETDEWEB)

Ma, Jie; Wang, Bo [State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200072 (China); Shanghai Engineering Technology Research Center of Special Casting, Shanghai 201605 (China); Zhao, Shunli [Research Institute, Baoshan Iron & Steel Co., Ltd, Shanghai 201900 (China); Wu, Guangxin [State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200072 (China); Shanghai Engineering Technology Research Center of Special Casting, Shanghai 201605 (China); Zhang, Jieyu, E-mail: zjy6162@staff.shu.edu.cn [State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200072 (China); Shanghai Engineering Technology Research Center of Special Casting, Shanghai 201605 (China); Yang, Zhiliang [State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200072 (China); Shanghai Engineering Technology Research Center of Special Casting, Shanghai 201605 (China)

2016-05-25

We have extended the dendritic growth model first proposed by Boettinger, Coriell and Trivedi (here termed EBCT) for microstructure simulations of rapidly solidified non-dilute alloys. The temperature-dependent distribution coefficient, obtained from calculations of phase equilibria, and the continuous growth model (CGM) were adopted in the present EBCT model to describe the solute trapping behaviors. The temperature dependence of the physical properties, which were not used in previous dendritic growth models, were also considered in the present EBCT model. These extensions allow the present EBCT model to be used for microstructure simulations of non-dilute alloys. The comparison of the present EBCT model with the BCT model proves that the considerations of the distribution coefficient and physical properties are necessary for microstructure simulations, especially for small particles with high undercoolings. Finally, the EBCT model was incorporated into the cellular automaton-finite element (CAFE) model to simulate microstructures of gas-atomized ASP30 high speed steel particles that were then compared with experimental results. Both the simulated and experimental results reveal that a columnar dendritic microstructure preferentially forms in small particles and an equiaxed microstructure forms otherwise. The applications of the present EBCT model provide a convenient way to predict the microstructure of non-dilute alloys. - Highlights: • A dendritic growth model was developed considering non-equilibrium distribution coefficient. • The physical properties with temperature dependence were considered in the extended model. • The extended model can be used to non-dilute alloys and the extensions are necessary in small particles. • Microstructure of ASP30 steel was investigated using the present model and verified by experiment.

Growth and Nutrient Use Efficiencies of Yams (Dioscorea spp. Grown in Two Contrasting Soils of West Africa

Directory of Open Access Journals (Sweden)

Lucien N'Guessan Diby

2011-01-01

Full Text Available Fertilization is an important management strategy of yams (Dioscorea spp. especially when grown in degraded soils. A field study evaluated the leaf numbers, leaf area indices, crop growth, yields, and nitrogen (N and potassium (K use efficiencies of D. alata and D. rotundata in Côte d'Ivoire when grown in two contrasting soils with and without fertilizer. D. alata had a lower number of leaves per vine, although leaf area indices were higher, and the leaves were retained for a longer period than in D. rotundata. In all situations, the yields of D. alata were significantly higher, and fertilizers promoted growth of shoots, roots, tubers, and, thus, final yields especially in the low fertile savanna soil. The beneficial impact of fertilizer on yields was significantly lower in the fertile forest soils. The nutrient use agronomic efficiencies indicated the impact of both N and K in promoting yields especially under nonfertilized conditions.

Gradient microfluidics enables rapid bacterial growth inhibition testing.

Science.gov (United States)

Li, Bing; Qiu, Yong; Glidle, Andrew; McIlvenna, David; Luo, Qian; Cooper, Jon; Shi, Han-Chang; Yin, Huabing

2014-03-18

Bacterial growth inhibition tests have become a standard measure of the adverse effects of inhibitors for a wide range of applications, such as toxicity testing in the medical and environmental sciences. However, conventional well-plate formats for these tests are laborious and provide limited information (often being restricted to an end-point assay). In this study, we have developed a microfluidic system that enables fast quantification of the effect of an inhibitor on bacteria growth and survival, within a single experiment. This format offers a unique combination of advantages, including long-term continuous flow culture, generation of concentration gradients, and single cell morphology tracking. Using Escherichia coli and the inhibitor amoxicillin as one model system, we show excellent agreement between an on-chip single cell-based assay and conventional methods to obtain quantitative measures of antibiotic inhibition (for example, minimum inhibition concentration). Furthermore, we show that our methods can provide additional information, over and above that of the standard well-plate assay, including kinetic information on growth inhibition and measurements of bacterial morphological dynamics over a wide range of inhibitor concentrations. Finally, using a second model system, we show that this chip-based systems does not require the bacteria to be labeled and is well suited for the study of naturally occurring species. We illustrate this using Nitrosomonas europaea, an environmentally important bacteria, and show that the chip system can lead to a significant reduction in the period required for growth and inhibition measurements (<4 days, compared to weeks in a culture flask).

Microbial Growth and Carbon Use Efficiency in the Rhizosphere and Root-Free Soil

Science.gov (United States)

Blagodatskaya, Evgenia; Blagodatsky, Sergey; Anderson, Traute-Heidi; Kuzyakov, Yakov

2014-01-01

Plant-microbial interactions alter C and N balance in the rhizosphere and affect the microbial carbon use efficiency (CUE)–the fundamental characteristic of microbial metabolism. Estimation of CUE in microbial hotspots with high dynamics of activity and changes of microbial physiological state from dormancy to activity is a challenge in soil microbiology. We analyzed respiratory activity, microbial DNA content and CUE by manipulation the C and nutrients availability in the soil under Beta vulgaris. All measurements were done in root-free and rhizosphere soil under steady-state conditions and during microbial growth induced by addition of glucose. Microorganisms in the rhizosphere and root-free soil differed in their CUE dynamics due to varying time delays between respiration burst and DNA increase. Constant CUE in an exponentially-growing microbial community in rhizosphere demonstrated the balanced growth. In contrast, the CUE in the root-free soil increased more than three times at the end of exponential growth and was 1.5 times higher than in the rhizosphere. Plants alter the dynamics of microbial CUE by balancing the catabolic and anabolic processes, which were decoupled in the root-free soil. The effects of N and C availability on CUE in rhizosphere and root-free soil are discussed. PMID:24722409

Editors' Choice Growth of Layered WS2Electrocatalysts for Highly Efficient Hydrogen Production Reaction

KAUST Repository

Alsabban, Merfat M.; Min, Shixiong; Hedhili, Mohamed N.; Ming, Jun; Li, Lain-Jong; Huang, Kuo-Wei

2016-01-01

Seeking more economical alternative electrocatalysts without sacrificing much in performance to replace precious metal Pt is one of the major research topics in hydrogen evolution reactions (HER). Tungsten disulfide (WS2) has been recognized as a promising substitute for Pt owing to its high efficiency and low-cost. Since most existing works adopt solution-synthesized WS2 crystallites for HER, direct growth of WS2 layered materials on conducting substrates should offer new opportunities. The growth of WS2 by the thermolysis of ammonium tetrathiotungstate (NH4)(2)WS4 was examined under various gaseous environments. Structural analysis and electrochemical studies show that the H2S environment leads to the WS2 catalysts with superior HER performance with an extremely low overpotential (eta(10) = 184 mV). (C) The Author(s) 2016. Published by ECS. All rights reserved.

Editors' Choice Growth of Layered WS2Electrocatalysts for Highly Efficient Hydrogen Production Reaction

KAUST Repository

Alsabban, Merfat M.

2016-08-18

Seeking more economical alternative electrocatalysts without sacrificing much in performance to replace precious metal Pt is one of the major research topics in hydrogen evolution reactions (HER). Tungsten disulfide (WS2) has been recognized as a promising substitute for Pt owing to its high efficiency and low-cost. Since most existing works adopt solution-synthesized WS2 crystallites for HER, direct growth of WS2 layered materials on conducting substrates should offer new opportunities. The growth of WS2 by the thermolysis of ammonium tetrathiotungstate (NH4)(2)WS4 was examined under various gaseous environments. Structural analysis and electrochemical studies show that the H2S environment leads to the WS2 catalysts with superior HER performance with an extremely low overpotential (eta(10) = 184 mV). (C) The Author(s) 2016. Published by ECS. All rights reserved.

Sulfur rich microporous polymer enables rapid and efficient removal of mercury(II) from water.

Science.gov (United States)

Xu, Dan; Wu, Winston Duo; Qi, Hao-Jun; Yang, Rui-Xia; Deng, Wei-Qiao

2018-04-01

Design and synthesis of adsorbents for efficient decontamination of hazardous contaminants Hg 2+ from wastewater, based on a facile and economical strategy, is an attractive target. Here, a novel sulfur rich microporous polymer (sulfur content of 31.4 wt %) with high surface area as well as densely populated sulfur atom with fast accessibility was reported to remove mercury (II) from water. The as prepared polymer (SMP) exhibited high binding affinity, high adsorption capacities, rapid adsorption kinetics, and good recyclability for Hg 2+ . The adsorption capacity of SMP was 595.2 mg g -1 . Furthermore, SMP could reduce trace concentrations of Hg 2+ from 200 p. p. b. to a level below drinking water standards (2 p. p. b.) within 3 min. This work allows large-scale production of sulfur rich porous materials for the practical application in water treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Efficient 3D frequency response modeling with spectral accuracy by the rapid expansion method

KAUST Repository

Chu, Chunlei

2012-07-01

Frequency responses of seismic wave propagation can be obtained either by directly solving the frequency domain wave equations or by transforming the time domain wavefields using the Fourier transform. The former approach requires solving systems of linear equations, which becomes progressively difficult to tackle for larger scale models and for higher frequency components. On the contrary, the latter approach can be efficiently implemented using explicit time integration methods in conjunction with running summations as the computation progresses. Commonly used explicit time integration methods correspond to the truncated Taylor series approximations that can cause significant errors for large time steps. The rapid expansion method (REM) uses the Chebyshev expansion and offers an optimal solution to the second-order-in-time wave equations. When applying the Fourier transform to the time domain wavefield solution computed by the REM, we can derive a frequency response modeling formula that has the same form as the original time domain REM equation but with different summation coefficients. In particular, the summation coefficients for the frequency response modeling formula corresponds to the Fourier transform of those for the time domain modeling equation. As a result, we can directly compute frequency responses from the Chebyshev expansion polynomials rather than the time domain wavefield snapshots as do other time domain frequency response modeling methods. When combined with the pseudospectral method in space, this new frequency response modeling method can produce spectrally accurate results with high efficiency. © 2012 Society of Exploration Geophysicists.

The Boom of Electricity Demand in the Residential Sector in the Developing World and the Potential for Energy Efficiency

Energy Technology Data Exchange (ETDEWEB)

Letschert, Virginie; McNeil, Michael A.

2008-05-13

With the emergence of China as the world's largest energy consumer, the awareness of developing country energy consumption has risen. According to common economic scenarios, the rest of the developing world will probably see an economic expansion as well. With this growth will surely come continued rapid growth in energy demand. This paper explores the dynamics of that demand growth for electricity in the residential sector and the realistic potential for coping with it through efficiency. In 2000, only 66% of developing world households had access to electricity. Appliance ownership rates remain low, but with better access to electricity and a higher income one can expect that households will see their electricity consumption rise significantly. This paper forecasts developing country appliance growth using econometric modeling. Products considered explicitly - refrigerators, air conditioners, lighting, washing machines, fans, televisions, stand-by power, water heating and space heating - represent the bulk of household electricity consumption in developing countries. The resulting diffusion model determines the trend and dynamics of demand growth at a level of detail not accessible by models of a more aggregate nature. In addition, the paper presents scenarios for reducing residential consumption through cost-effective and/or best practice efficiency measures defined at the product level. The research takes advantage of an analytical framework developed by LBNL (BUENAS) which integrates end use technology parameters into demand forecasting and stock accounting to produce detailed efficiency scenarios, which allows for a realistic assessment of efficiency opportunities at the national or regional level. The past decades have seen some of the developing world moving towards a standard of living previously reserved for industrialized countries. Rapid economic development, combined with large populations has led to first China and now India to emerging as &apos

Deployment of energy efficient technologies in developing countries

International Nuclear Information System (INIS)

Koch, H.J.

2000-01-01

Efficient and reliable power generation and power distribution represent the engine for economic growth in developing countries. A vast majority of the population in these countries does not have access to electricity, and those that do are often faced with an unreliable power distribution system. Now is the ideal time to transfer efficient energy technologies which also adhere to environmental standards. There are a myriad of inexpensive ways to avoid energy losses, such as cogeneration, the addition of natural gas turbines to coal-fired heating boilers. Even power generation itself can be more efficient. These improvements would encourage the financing world to pay closer attention and invest more rapidly in projects aimed at improving efficient power generation. The International Energy Agency was created in 1974 with the participation of 25 countries, and its mandate was expanded to include the deployment of clean and efficient energy technologies in developing countries. Technology transfer involves more than the shipping of equipment combined with some expert assistance. It involves the active participation of several partners, from the private sector, governments, non-governmental organizations (NGO), and academic institutions. The objective is to empower the recipient population, thereby reducing the need for imports. It is a joint international effort where the results benefit all participants. The author also discussed the Climate Technology Initiative (CTI) with the aim of disseminating information concerning climate change in the hope of reducing global emissions of greenhouse gases. Discussions to assist countries in the examination of avenues open to them in the field of energy are also fostered. Training in energy efficient technologies represents an important aspect of the role of CTI. It applies to decision makers to help them establish appropriate guidelines and regulations with regard to these technologies. Sustainable development can be achieved

Controlling Growth High Uniformity Indium Selenide (In2Se3) Nanowires via the Rapid Thermal Annealing Process at Low Temperature.

Science.gov (United States)

Hsu, Ya-Chu; Hung, Yu-Chen; Wang, Chiu-Yen

2017-09-15

High uniformity Au-catalyzed indium selenide (In 2 Se 3) nanowires are grown with the rapid thermal annealing (RTA) treatment via the vapor-liquid-solid (VLS) mechanism. The diameters of Au-catalyzed In 2 Se 3 nanowires could be controlled with varied thicknesses of Au films, and the uniformity of nanowires is improved via a fast pre-annealing rate, 100 °C/s. Comparing with the slower heating rate, 0.1 °C/s, the average diameters and distributions (standard deviation, SD) of In 2 Se 3 nanowires with and without the RTA process are 97.14 ± 22.95 nm (23.63%) and 119.06 ± 48.75 nm (40.95%), respectively. The in situ annealing TEM is used to study the effect of heating rate on the formation of Au nanoparticles from the as-deposited Au film. The results demonstrate that the average diameters and distributions of Au nanoparticles with and without the RTA process are 19.84 ± 5.96 nm (30.00%) and about 22.06 ± 9.00 nm (40.80%), respectively. It proves that the diameter size, distribution, and uniformity of Au-catalyzed In 2 Se 3 nanowires are reduced and improved via the RTA pre-treated. The systemic study could help to control the size distribution of other nanomaterials through tuning the annealing rate, temperatures of precursor, and growth substrate to control the size distribution of other nanomaterials. Graphical Abstract Rapid thermal annealing (RTA) process proved that it can uniform the size distribution of Au nanoparticles, and then it can be used to grow the high uniformity Au-catalyzed In 2 Se 3 nanowires via the vapor-liquid-solid (VLS) mechanism. Comparing with the general growth condition, the heating rate is slow, 0.1 °C/s, and the growth temperature is a relatively high growth temperature, > 650 °C. RTA pre-treated growth substrate can form smaller and uniform Au nanoparticles to react with the In 2 Se 3 vapor and produce the high uniformity In 2 Se 3 nanowires. The in situ annealing TEM is used to realize the effect of heating

Potential Benefits from Improved Energy Efficiency of KeyElectrical Products: The Case of India

Energy Technology Data Exchange (ETDEWEB)

McNeil, Michael; Iyer, Maithili; Meyers, Stephen; Letschert,Virginie; McMahon, James E.

2005-12-20

The goal of this project was to estimate the net benefits that cost-effective improvements in energy efficiency can bring to developing countries. The study focused on four major electrical products in the world's second largest developing country, India. These products--refrigerators, room air conditioners, electric motors, and distribution transformers--are important targets for efficiency improvement in India and in other developing countries. India is an interesting subject of study because of it's size and rapid economic growth. Implementation of efficient technologies in India would save billions in energy costs, and avoid hundreds of megatons of greenhouse gas emissions. India also serves as an example of the kinds of improvement opportunities that could be pursued in other developing countries.

Timing growth and development of Campanula by daily light integral and supplemental light level in a cost-efficient light control system

DEFF Research Database (Denmark)

Kjær, Katrine Heinsvig; Ottosen, Carl-Otto; Jørgensen, Bo Nørregaard

2012-01-01

light control system (DynaLight desktop) automatically defines the most cost-efficient use of supplemental light based on predefined setpoints for daily photosynthesis integral (DPI), forecasted solar irradiance and the market price on electricity. It saves energy in high-cost periods of electricity......Two campanula species Campanula portenschlagiana (‘Blue Get Mee’) and Campanula cochlearifolia (‘Blue Wonder’) were grown in a cost-efficient light control system and the effect of supplemental light level and daily light integral (DLI) on growth and development was quantified. The alternative...... the number of flowers and buds and CLI in ‘Blue Get Mee’. The results demonstrate that DLI was the main limiting factor for prediction of growth and development when two campanula species were grown in a cost-efficient light control system where the number of daily light hours was often below the critical...

High water-use efficiency and growth contribute to success of non-native Erodium cicutarium in a Sonoran Desert winter annual community.

Science.gov (United States)

Kimball, Sarah; Gremer, Jennifer R; Barron-Gafford, Greg A; Angert, Amy L; Huxman, Travis E; Venable, D Lawrence

2014-01-01

The success of non-native, invasive species may be due to release from natural enemies, superior competitive abilities, or both. In the Sonoran Desert, Erodium cicutarium has increased in abundance over the last 30 years. While native species in this flora exhibit a strong among-species trade-off between relative growth rate and water-use efficiency, E. cicutarium seems to have a higher relative growth rate for its water-use efficiency value relative to the pattern across native species. This novel trait combination could provide the non-native species with a competitive advantage in this water-limited environment. To test the hypothesis that E. cicutarium is able to achieve high growth rates due to release from native herbivores, we compared the effects of herbivory on E. cicutarium and its native congener, Erodium texanum. We also compared these two species across a range of environmental conditions, both in a common garden and in two distinct seasons in the field, using growth analysis, isotopic compositions and leaf-level gas exchange. Additionally, we compared the competitive abilities of the two Erodium species in a greenhouse experiment. We found no evidence of herbivory to either species. Physiological measurements in a common environment revealed that E. cicutarium was able to achieve high growth rates while simultaneously controlling leaf-level water loss. Non-native E. cicutarium responded to favourable conditions in the field with greater specific leaf area and leaf area ratio than native E. texanum. The non-native Erodium was a stronger competitor than its native congener in a greenhouse competition experiment. The ability to maintain relatively higher values of water-use efficiency:relative growth rate in comparison to the native flora may be what enables E. cictarium to outcompete native species in both wet and dry years, resulting in an increase in abundance in the highly variable Sonoran Desert.

Two tropical conifers show strong growth and water-use efficiency responses to altered CO2 concentration.

Science.gov (United States)

Dalling, James W; Cernusak, Lucas A; Winter, Klaus; Aranda, Jorge; Garcia, Milton; Virgo, Aurelio; Cheesman, Alexander W; Baresch, Andres; Jaramillo, Carlos; Turner, Benjamin L

2016-11-01

Conifers dominated wet lowland tropical forests 100 million years ago (MYA). With a few exceptions in the Podocarpaceae and Araucariaceae, conifers are now absent from this biome. This shift to angiosperm dominance also coincided with a large decline in atmospheric CO 2 concentration (c a ). We compared growth and physiological performance of two lowland tropical angiosperms and conifers at c a levels representing pre-industrial (280 ppm), ambient (400 ppm) and Eocene (800 ppm) conditions to explore how differences in c a affect the growth and water-use efficiency (WUE) of seedlings from these groups. Two conifers (Araucaria heterophylla and Podocarpus guatemalensis) and two angiosperm trees (Tabebuia rosea and Chrysophyllum cainito) were grown in climate-controlled glasshouses in Panama. Growth, photosynthetic rates, nutrient uptake, and nutrient use and water-use efficiencies were measured. Podocarpus seedlings showed a stronger (66 %) increase in relative growth rate with increasing c a relative to Araucaria (19 %) and the angiosperms (no growth enhancement). The response of Podocarpus is consistent with expectations for species with conservative growth traits and low mesophyll diffusion conductance. While previous work has shown limited stomatal response of conifers to c a , we found that the two conifers had significantly greater increases in leaf and whole-plant WUE than the angiosperms, reflecting increased photosynthetic rate and reduced stomatal conductance. Foliar nitrogen isotope ratios (δ 15 N) and soil nitrate concentrations indicated a preference in Podocarpus for ammonium over nitrate, which may impact nitrogen uptake relative to nitrate assimilators under high c a SIGNIFICANCE: Podocarps colonized tropical forests after angiosperms achieved dominance and are now restricted to infertile soils. Although limited to a single species, our data suggest that higher c a may have been favourable for podocarp colonization of tropical South America 60�

Energetic Constraints on Fungal Growth.

Science.gov (United States)

Heaton, Luke L M; Jones, Nick S; Fricker, Mark D

2016-02-01

Saprotrophic fungi are obliged to spend energy on growth, reproduction, and substrate digestion. To understand the trade-offs involved, we developed a model that, for any given growth rate, identifies the strategy that maximizes the fraction of energy that could possibly be spent on reproduction. Our model's predictions of growth rates and bioconversion efficiencies are consistent with empirical findings, and it predicts the optimal investment in reproduction, resource acquisition, and biomass recycling for a given environment and timescale of reproduction. Thus, if the timescale of reproduction is long compared to the time required for the fungus to double in size, the model suggests that the total energy available for reproduction is maximal when a very small fraction of the energy budget is spent on reproduction. The model also suggests that fungi growing on substrates with a high concentration of low-molecular-weight compounds will not benefit from recycling: they should be able to grow more rapidly and allocate more energy to reproduction without recycling. In contrast, recycling offers considerable benefits to fungi growing on recalcitrant substrates, where the individual hyphae are not crowded and the time taken to consume resource is significantly longer than the fungus doubling time.

Microwave-assisted routes for rapid and efficient modification of layered perovskites.

Science.gov (United States)

Akbarian-Tefaghi, S; Wiley, J B

2018-02-27

Recent advances in exploiting microwave radiation in the topochemical modification of layered oxide perovskites are presented. Such methods work well for rapid bulk synthetic steps used in the production of novel inorganic-organic hybrids (protonation, grafting, intercalation, and in situ click reactions), exfoliation to produce dispersed nanosheets, and post-exfoliation processing to rapidly vary nanosheet surface groups. Compared to traditional methods that often take days, microwave methods can produce quality products in as little as 1-2 h.

High growth and rapid internationalisation of firms from emerging markets: the case of the Middle East and North Africa (MENA) Region

OpenAIRE

Hatem, Omaima

2012-01-01

The aim of this thesis is to understand the phenomena of the high growth and rapid internationalisation of firms from emerging markets. It explores the applicability of international entrepreneurship theory to the context of the emerging market enterprises in the Middle East and North Africa (MENA) region. It integrates the literature of strategic entrepreneurship and that of portfolio entrepreneurship with the literature of international entrepreneurship to provide a closer fi...

Plan Quality and Treatment Efficiency for Radiosurgery to Multiple Brain Metastases: Non-Coplanar RapidArc vs Gamma Knife

Directory of Open Access Journals (Sweden)

Haisong eLiu

2016-02-01

Full Text Available Objectives: This study compares the dosimetry and efficiency of two modern radiosurgery (SRS modalities for multiple brain metastases (Gamma Knife and LINAC-based RapidArc/volumetric modulated arc therapy, with a special focus on the comparison of low dose spread.Methods: Six patients with three or four small brain metastases were used in this study. The size of targets varied from 0.1 ~ 10.5 cc. SRS doses were prescribed according to size of lesions. SRS plans were made using both Gamma Knife® Perfexion and a single-isocenter, multiple non-coplanar RapidArc®. Dosimetric parameters analyzed included RTOG conformity index (CI, gradient index (GI, 12 Gy isodose volume (V12Gy for each target, and the dose spread (Dspread for each plan. Dspread reflects SRS plan’s capability of confining radiation to within the local vicinity of the lesion and to not spread out to the surrounding normal brain tissues. Each plan has a dose (Dspread, such that once dose decreases below Dspread (on total tissue DVH, isodose volume starts increasing dramatically. Dspread is defined as that dose when volume increase first exceeds 20 cc per 0.1 Gy dose decrease. Results: RapidArc SRS has smaller CI (1.19 ±0.14 vs. 1.50 ± 0.16, p<0.001 and larger GI (4.77 ± 1.49 vs. 3.65 ± 0.98, p <0.01. V12Gy results were comparable (2.73 ± 1.38 cc vs. 3.06 ± 2.20 cc, p = 0.58. Moderate to lower dose spread, V6, V4.5, and V3, were also equivalent. Gamma Knife plans achieved better very low dose spread (≤3 Gy and also had slightly smaller Dspread, 1.9 Gy vs 2.5 Gy. Total treatment time for Gamma Knife is estimated between 60~100 min. Gamma Knife treatments are between 3~5 times longer compared to RapidArc treatment techniques.Conclusion: Dosimetric parameters reflecting prescription dose conformality (CI, dose fall off (GI, radiation necrosis indicator (V12Gy, and dose spread (Dspread were compared between Gamma Knife SRS and RapidArc SRS for multi-mets. RapidArc plans have

Monitoring of Water Spectral Pattern Reveals Differences in Probiotics Growth When Used for Rapid Bacteria Selection.

Directory of Open Access Journals (Sweden)

Aleksandar Slavchev

Full Text Available Development of efficient screening method coupled with cell functionality evaluation is highly needed in contemporary microbiology. The presented novel concept and fast non-destructive method brings in to play the water spectral pattern of the solution as a molecular fingerprint of the cell culture system. To elucidate the concept, NIR spectroscopy with Aquaphotomics were applied to monitor the growth of sixteen Lactobacillus bulgaricus one Lactobacillus pentosus and one Lactobacillus gasseri bacteria strains. Their growth rate, maximal optical density, low pH and bile tolerances were measured and further used as a reference data for analysis of the simultaneously acquired spectral data. The acquired spectral data in the region of 1100-1850nm was subjected to various multivariate data analyses - PCA, OPLS-DA, PLSR. The results showed high accuracy of bacteria strains classification according to their probiotic strength. Most informative spectral fingerprints covered the first overtone of water, emphasizing the relation of water molecular system to cell functionality.

Rapid Aminoglycoside NP Test for Rapid Detection of Multiple Aminoglycoside Resistance in Enterobacteriaceae.

Science.gov (United States)

Nordmann, Patrice; Jayol, Aurélie; Dobias, Jan; Poirel, Laurent

2017-04-01

The rapid aminoglycoside NP (Nordmann/Poirel) test was developed to rapidly identify multiple aminoglycoside (AG) resistance in Enterobacteriaceae It is based on the detection of the glucose metabolism related to enterobacterial growth in the presence of a defined concentration of amikacin plus gentamicin. Formation of acid metabolites was evidenced by a color change (orange to yellow) of the red phenol pH indicator. The rapid aminoglycoside NP test was evaluated by using bacterial colonies of 18 AG-resistant isolates producing 16S rRNA methylases, 20 AG-resistant isolates expressing AG-modifying enzymes (acetyl-, adenyl-, and phosphotransferases), and 10 isolates susceptible to AG. Its sensitivity and specificity were 100% and 97%, respectively, compared to the broth dilution method, which was taken as the gold standard for determining aminoglycoside resistance. The test is inexpensive, rapid (<2 h), and implementable worldwide. Copyright © 2017 American Society for Microbiology.

Rapid Startup and Loading of an Attached Growth, Simultaneous Nitrification/Denitrification Membrane Aerated Bioreactor

Science.gov (United States)

Meyer, Caitlin; Vega, Leticia

2014-01-01

The Membrane Aerated Bioreactor (MABR) is an attached-growth biological system for simultaneous nitrification and denitrification. This design is an innovative approach to common terrestrial wastewater treatments for nitrogen and carbon removal. Implementing a biologically-based water treatment system for long-duration human exploration is an attractive, low energy alternative to physiochemical processes. Two obstacles to implementing such a system are (1) the "start-up" duration from inoculation to steady-state operations and (2) the amount of surface area needed for the biological activity to occur. The Advanced Water Recovery Systems (AWRS) team at JSC explored these two issues through two tests; a rapid inoculation study and a wastewater loading study. Results from these tests demonstrate that the duration from inoculation to steady state can be reduced to two weeks and that the surface area to volume ratio baseline used in the Alternative Water Processor (AWP) test was higher than what was needed to remove the organic carbon and ammonium from the system.

Effect of soybean diet: Growth and conversion efficiencies of fingerling of stinging cat fish, Heteropneustes fossilis (Bloch

Directory of Open Access Journals (Sweden)

Muzzammil Iqbal Siddiqui

2014-04-01

Full Text Available Replacement of 15% protein from soybean meal in Diet II was feasible for the stinging cat fish, Heteropneustes fossilis and no significant differences in growth parameters were found in fish fed soybean meal-based diets compared to those fed control diet (Diet I. Live weight gain percent (165% obtained in fish fed soybean meal based diet was not significantly different to that achieved (171% in fish fed Diet I. Specific growth rate percent, SGR (2.79%, feed conversion ratio FCR (1.40 and protein efficiency ratio PER (1.79 recorded in fish fed Diet II were also more less comparable to those fed control diet. Mortality was not recorded in the period of the feeding trial. Body composition of the fish fed soybean meal based diet (Diet II was also comparable to that fed control diet. Significantly higher fat content was noted in fish fed Diet II. However, the protein contents were not changed in fish fed Diet I and II. Similarly, no significant differences (P > 0.05 in protein productive value were noted between the two groups. However, ash content differed significantly (P < 0.05 in fish fed Diet I and II. Although soybean meal-based diet depressed growth and feed conversion efficiencies of the fish to some extent, inclusion of soybean meal was found to be cost-effective alternative to fish meal.

Genotypic variation in transpiration efficiency, carbon-isotope discrimination and carbon allocation during early growth in sunflower

International Nuclear Information System (INIS)

Virgona, J.M.; Farquhar, G.D.; Hubick, K.T.; Rawson, H.M.; Downes, R.W.

1990-01-01

Transpiration efficiency of dry matter production (W), carbon-isotope discrimination (Δ) and dry matter partitioning were measured on six sunflower (Helianthus annuus L.) genotypes grown for 32 days in a glasshouse. Two watering regimes, one well watered (HW) and the other delivering half the water used by the HW plants (LW), were imposed. Four major results emerged from this study: Three was significant genotypic variation in W in sunflower and this was closely reflected in Δ for both watering treatments; the low watering regime caused a decrease in Δ but no change in W; nonetheless the genotypic ranking for either Δ or W was not significantly altered by water stress; a positive correlation between W and biomass accumulation occurred among genotypes of HW plants; ρ, the ratio of total plant carbon content to leaf area, was positively correlated with W and negatively correlated with Δ. These results are discussed with reference to the connection between transpiration efficiency and plant growth, indicating that Δ can be used to select for W among young sunflower plants. However, selection for W may be accompanied by changes in other important plant growth characteristics such as ρ. 19 refs., 4 figs

Ontogenetic changes in radiation use efficiency of sunflower (Helianthus annuus L.) crops

International Nuclear Information System (INIS)

Trapani, N.; Hall, A.J.; Sadras, V.O.; Vilella, F.

1992-01-01

Radiation use efficiency (ϵ) values for sunflower were derived using data from periodic determinations of crop aerial or total (aerial + root) biomass and radiation interception in two experiments conducted at Junin and Buenos Aires, Argentina. Analysis showed that three distinct phases, each characterized by a different value of ϵ, could be distinquished. The phases were establishment (0–47 days after emergence (dae)), rapid growth (47 dae-anthesis) and postanthesis (anthesis-physiologcial maturity). The crops had reached the bud-visible stage and intercepted at least 85% of incident radiation by 47 dae. Efficiency values based on aerial biomass were highest during the rapid growth (ϵrg = 2.4 ± 0.22 g/MJ PAR) phase and lower during the establishment (ϵ e = 1.01 ± 0.25 g/MJ PAR) and postanthesis (ϵ pa = 1.3 ± 0.15 g/MJ PAR) phases. The differences between ϵ pa and ϵ rg are attributed to the increased respiration load, high synthesis costs of the oil-rich grains and leaf senescence during grain filling. The value of ϵe was less than of ϵ rg even when efficiencies were calculated on the basis of total crop biomass (i.e. including root biomass). Hence, ontogenetic changes in partitioning of biomass between the root and aerial organs do not seem to be the cause of the changes in the value of ϵ. No variations in photosynthetic capacity with leaf position could be found, and it is concluded that the most likely reason for the lower values of ϵ e lies in saturation of canopy photosynthesis at less than full sunlight while crop cover is incomplete. (author)

Herbicide effects on the growth and photosynthetic efficiency of Cassiopea maremetens.

Science.gov (United States)

Rowen, David J; Templeman, Michelle A; Kingsford, Michael J

2017-09-01

Herbicides from agricultural run-off have been measured in coastal systems of the Great Barrier Reef over many years. Non-target herbicide exposure, especially photosystem II herbicides has the potential to affect seagrasses and other marine species. The symbiotic benthic jellyfish Cassiopea maremetens is present in tropical/sub-tropical estuarine and marine environments. Jellyfish (n = 8 per treatment) were exposed to four separate concentrations of agricultural formulations of diuron or hexazinone to determine their sensitivity and potential for recovery to pulsed herbicide exposure. Jellyfish growth, symbiont photosynthetic activity and zooxanthellae density were analysed for herbicide-induced changes for 7 days followed by a 7 day recovery period. Both the jellyfish and endosymbiont were more sensitive to diuron than hexazinone. The 7-day EC 50 for jellyfish growth was 0.35 μg L -1 for Diuron and 17.5 μg L -1 for Hexazinone respectively. Diuron exposure caused a significant decrease (p diuron and hexazinone caused significant decreases in photosynthetic efficiency (effective quantum yield) in all treatment concentrations (0.1 μg L -1 and above) and this effect continued in the post-exposure period. As this species is frequently found in near-shore environments, they may be particularly vulnerable to herbicide run-off. Copyright © 2017 Elsevier Ltd. All rights reserved.

Chitin nanofibrils for rapid and efficient removal of metal ions from water system.

Science.gov (United States)

Liu, Dagang; Zhu, Yi; Li, Zehui; Tian, Donglin; Chen, Lei; Chen, Peng

2013-10-15

Joint mechanical defibrillation was successfully used to downsize chitin micro-particles (CMP) into nanofibrils without changing its chemical or crystalline structure. The fine chitin nanofibrils (CNF) bearing width of about 50 nm and length of more than 1 μm were then developed as heavy metal ion sorbents. The uptake performance of CNF dependent on pH, ionic concentration, time, and temperature was investigated. Results show that fixation amount of Cd(II), Ni(II), Cu(II), Zn(II), Pb(II), Cr(III) on CNF was up to 2.94, 2.30, 2.22, 2.06, 1.46, and 0.31 mmol/g, respectively, much higher than CMP due to high specific surface area and widely distributed pores of CNF. Adsorption kinetics of CMP and CNF followed pseudo-second-order model and Freundlich isotherm although CNF exhibited higher rate constant and sorption capacity than that of CMP. The defibrillated CNF is renewable, feasible, easily recyclable, and is thought as good candidate for heavy metal ion treatment due to their low sorption energy, rapid and efficient uptake capacity. Copyright © 2013 Elsevier Ltd. All rights reserved.

Population Growth and Poverty in the Developing World.

Science.gov (United States)

Birdsall, Nancy

1980-01-01

The link between rapid population growth and the absolute poverty which currently afflicts 780 million people in developing countries (excluding China and other centrally planned economies) is examined. As a result of rapid population growth, many countries suffer slow per capita income growth, a lack of progress in reducing income inequality, and…

On the mechanism of rapid postirradiation recovery of yeast

International Nuclear Information System (INIS)

Glazunov, A.V.; Kapul'tsevich, Yu.G.

1983-01-01

Rapid postirradiation recovery of diploid yeast Saccharomyces cerevisiae is equally effective both in water and in a liquid nutrition medium. In the haploid strains, rapid recovery occurs more readily in the log phase than in the stationary phase of growth. In the diploid strains, rapid recovery is more effective in the log phase than in the stationary phase. Rapid recovery of yeast does not require an additional protein synthesis. Damages induced by UV-light are not sub ected to rapid recovery

In Search of a Time Efficient Approach to Crack and Delamination Growth Predictions in Composites

Science.gov (United States)

Krueger, Ronald; Carvalho, Nelson

2016-01-01

Analysis benchmarking was used to assess the accuracy and time efficiency of algorithms suitable for automated delamination growth analysis. First, the Floating Node Method (FNM) was introduced and its combination with a simple exponential growth law (Paris Law) and Virtual Crack Closure technique (VCCT) was discussed. Implementation of the method into a user element (UEL) in Abaqus/Standard(Registered TradeMark) was also presented. For the assessment of growth prediction capabilities, an existing benchmark case based on the Double Cantilever Beam (DCB) specimen was briefly summarized. Additionally, the development of new benchmark cases based on the Mixed-Mode Bending (MMB) specimen to assess the growth prediction capabilities under mixed-mode I/II conditions was discussed in detail. A comparison was presented, in which the benchmark cases were used to assess the existing low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) in comparison to the FNM-VCCT fatigue growth analysis implementation. The low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) was able to yield results that were in good agreement with the DCB benchmark example. Results for the MMB benchmark cases, however, only captured the trend correctly. The user element (FNM-VCCT) always yielded results that were in excellent agreement with all benchmark cases, at a fraction of the analysis time. The ability to assess the implementation of two methods in one finite element code illustrated the value of establishing benchmark solutions.

Effect of Thermal Annealing and Second Harmonic Generation on Bulk Damage Performance of Rapid-Growth KDP Type I Doublers at 1064 nm

International Nuclear Information System (INIS)

Runkel, M; Maricle, S; Torres, R; Auerbach, J; Floyd, R; Hawley-Fedder, R; Burnham, A K

2000-01-01

This paper discusses the results of thermal annealing and in-situ second harmonic generation (SHG) damage tests performed on six rapid growth KDP type 1 doubler crystals at 1064 nm (1 ω) on the Zeus automated damage test facility. Unconditioned (S/1) and conditioned (R/1) damage probability tests were performed before and after thermal annealing, then with and without SHG on six doubler crystals from the NIF-size, rapid growth KDP boule F6. The tests revealed that unannealed, last-grown material from the boule in either prismatic or pyramidal sectors exhibited the highest damage curves. After thermal annealing at 160 C for seven days, the prismatic sector samples increased in performance ranging from 1.6 to 2.4X, while material from the pyramidal sector increased only modestly, ranging from 1.0 to 1.4X. Second harmonic generation decreased the damage fluence by an average of 20 percent for the S/1 tests and 40 percent for R/1 tests. Conversion efficiencies under test conditions were measured to be 20 to 30 percent and compared quite well to predicted behavior, as modeled by LLNL frequency conversion computer codes. The damage probabilities at the 1 ω NIF redline fluence (scaled to 10 ns via t 0.5 ) for S/1 tests for the unannealed samples ranged from 20 percent in one sample to 90-100 percent for the other 5 samples. Thermal annealing reduced the damage probabilities to less than 35 percent for 3 of the poor-performing crystals, while two pyramidal samples remained in the 80 to 90 percent range. Second harmonic generation in the annealed crystal increased the S/1 damage probabilities on all the crystals and ranged from 40 to 100 percent. In contrast, R/1 testing of an unannealed crystal resulted in a damage probability at the NIF redline fluence of 16%. Annealing increased the damage performance to the extent that all test sites survived NIF redline fluences without damage. Second harmonic generation in the R/1 test yielded a damage probability of less than 2

Consumer Efficiency in Conflict with GDP Growth

DEFF Research Database (Denmark)

Nørgaard, Jørgen

2006-01-01

, however, devoted to the options for improving overall efficiency by satisfying people’s wants through other means than economic throughput of energy, etc., such as by leisure time. Barriers for implementing efficiency options are discussed, pointing out the inherited conflict in affluent regions between...

Rapidity distributions of secondary particles in hadron-nucleus collisions

International Nuclear Information System (INIS)

Alaverdyan, G.B.; Pak, A.S.; Tarasov, A.V.; Tseren, Ch.; Uzhinsky, V.V.

1979-01-01

In the framework of the cascade model of a leading particle the rapidity distributions of secondary particles in the hadron-nucleus interactions are considered. The energy loss fluctuations of leading particles in the successive collisions have been taken into account. It is shown that the centre of rapidity distribution is displaced towards small rapidity with target nucleus atomic number A growth. The model well reproduces the energy and A dependences of the rapidity distributions

Performance efficiency of feed utilization, relative growth rate, and survival rate of common carp (Cyprinus carpio) through the addition of phytase in the feed

Science.gov (United States)

Rachmawati, D.; Samidjan, I.

2018-04-01

The purpose of this study was to determine the effect of adding phytase enzyme in the feed on digestibility of feed, efficiency of feed utilization, relative growth rate and survival rate of Common carp (Cyprinus carpio). Fish samples in this research were Common carp with an average - weight of 3.34 ± 0,16 g/fish. The treatments were adding the phytase enzyme in the feed with the different level of doses. Those were A (0 U kg-1 feed), B (500 U kg-1 feed), C (1.000 U kg-1 feed g) and D (1.500 U kg-1 feed). Observation was conducted on digestibility of protein (ADCP), digestibility of phosphor (ADCF), efficiency of feed utilization (EFU), relative growth rate (RGR), protein efficiency ratio (PER), feed conversion ratio (FCR), survival rate (SR) and water quality parameters. The results show that the addition of phytase enzyme significantly (P0.05) affected on SR of common carp. Based on results, it was concluded that optimum doses of phytase enzyme feed in terms of digestibility of feed, efficiency utilization of Feed and growth rate of Common carp ranges from 943 to 1100 U kg-1 feed

A colorimetric assay of 1-aminocyclopropane-1-carboxylate (ACC) based on ninhydrin reaction for rapid screening of bacteria containing ACC deaminase.

Science.gov (United States)

Li, Z; Chang, S; Lin, L; Li, Y; An, Q

2011-08-01

1-Aminocyclopropane-1-carboxylate (ACC) deaminase activity is an efficient marker for bacteria to promote plant growth by lowering ethylene levels in plants. We aim to develop a method for rapidly screening bacteria containing ACC deaminase, based on a colorimetric ninhydrin assay of ACC. A reliable colorimetric ninhydrin assay was developed to quantify ACC using heat-resistant polypropylene chimney-top 96-well PCR plates, having the wells evenly heated in boiling water, preventing accidental contamination from boiling water and limiting evaporation. With this method to measure bacterial consumption of ACC, 44 ACC-utilizing bacterial isolates were rapidly screened out from 311 bacterial isolates that were able to grow on minimal media containing ACC as the sole nitrogen source. The 44 ACC-utilizing bacterial isolates showed ACC deaminase activities and belonged to the genus Burkholderia, Pseudomonas or Herbaspirillum. Determination of bacterial ACC consumption by the PCR-plate ninhydrin-ACC assay is a rapid and efficient method for screening bacteria containing ACC deaminase from a large number of bacterial isolates. The PCR-plate ninhydrin-ACC assay extends the utility of the ninhydrin reaction and enables a rapid screening of bacteria containing ACC deaminase from large numbers of bacterial isolates. © 2011 The Authors. Letters in Applied Microbiology © 2011 The Society for Applied Microbiology.

Phosphorus mobilizing consortium Mammoth P™ enhances plant growth

Science.gov (United States)

Bell, Colin; Mancini, Lauren M.; Lee, Melanie N.; Conant, Richard T.; Wallenstein, Matthew D.

2016-01-01

Phosphorus (P) is a critical nutrient used to maximize plant growth and yield. Current agriculture management practices commonly experience low plant P use efficiency due to natural chemical sorption and transformations when P fertilizer is applied to soils. A perplexing challenge facing agriculture production is finding sustainable solutions to deliver P more efficiently to plants. Using prescribed applications of specific soil microbial assemblages to mobilize soil bound—P to improve crop nutrient uptake and productivity has rarely been employed. We investigated whether inoculation of soils with a bacterial consortium developed to mobilize soil P, named Mammoth PTM, could increase plant productivity. In turf, herbs, and fruits, the combination of conventional inorganic fertilizer combined with Mammoth PTM increased productivity up to twofold compared to the fertilizer treatments without the Mammoth PTM inoculant. Jalapeño plants were found to bloom more rapidly when treated with either Mammoth P. In wheat trials, we found that Mammoth PTM by itself was able to deliver yields equivalent to those achieved with conventional inorganic fertilizer applications and improved productivity more than another biostimulant product. Results from this study indicate the substantial potential of Mammoth PTM to enhance plant growth and crop productivity. PMID:27326379

Advances in developing rapid, reliable and portable detection systems for alcohol.

Science.gov (United States)

Thungon, Phurpa Dema; Kakoti, Ankana; Ngashangva, Lightson; Goswami, Pranab

2017-11-15

Development of portable, reliable, sensitive, simple, and inexpensive detection system for alcohol has been an instinctive demand not only in traditional brewing, pharmaceutical, food and clinical industries but also in rapidly growing alcohol based fuel industries. Highly sensitive, selective, and reliable alcohol detections are currently amenable typically through the sophisticated instrument based analyses confined mostly to the state-of-art analytical laboratory facilities. With the growing demand of rapid and reliable alcohol detection systems, an all-round attempt has been made over the past decade encompassing various disciplines from basic and engineering sciences. Of late, the research for developing small-scale portable alcohol detection system has been accelerated with the advent of emerging miniaturization techniques, advanced materials and sensing platforms such as lab-on-chip, lab-on-CD, lab-on-paper etc. With these new inter-disciplinary approaches along with the support from the parallel knowledge growth on rapid detection systems being pursued for various targets, the progress on translating the proof-of-concepts to commercially viable and environment friendly portable alcohol detection systems is gaining pace. Here, we summarize the progress made over the years on the alcohol detection systems, with a focus on recent advancement towards developing portable, simple and efficient alcohol sensors. Copyright © 2017 Elsevier B.V. All rights reserved.

Rapid Start-up and Loading of an Attached Growth, Simultaneous Nitrification/Denitrification Membrane Aerated Bioreactor

Science.gov (United States)

Meyer, Caitlin E.; Pensinger, Stuart; Pickering, Karen D.; Barta, Daniel; Shull, Sarah A.; Vega, Letticia M.; Christenson, Dylan; Jackson, W. Andrew

2015-01-01

Membrane aerated bioreactors (MABR) are attached-growth biological systems used for simultaneous nitrification and denitrification to reclaim water from waste. This design is an innovative approach to common terrestrial wastewater treatments for nitrogen and carbon removal and implementing a biologically-based water treatment system for long-duration human exploration is an attractive, low energy alternative to physiochemical processes. Two obstacles to implementing such a system are (1) the "start-up" duration from inoculation to steady-state operations and (2) the amount of surface area needed for the biological activity to occur. The Advanced Water Recovery Systems (AWRS) team at JSC explored these two issues through two tests; a rapid inoculation study and a wastewater loading study. Results from these tests demonstrate that the duration from inoculation to steady state can be reduced to under two weeks, and that despite low ammonium removal rates, the MABRs are oversized.

Energy and economic growth: Grounding our understanding in physical reality

International Nuclear Information System (INIS)

Ockwell, David G.

2008-01-01

This article attempts to summarise the complex, wide ranging and unresolved debate within the economics literature on the possibility of decoupling economic growth from energy use. It explores the difference between neo-classical and ecological economic worldviews and highlights how the ecological economic approach attempts to ground its analysis within the physical limits implied by the laws of thermodynamics. Once these laws are accounted for, the possibility of decoupling economic growth from energy use seems more limited than neo-classical economics implies. Analysis of empirical evidence also demonstrates that observed improvements in GDP/energy use ratios in the USA are better explained by shifts towards higher quality fuels than by improvements in the energy efficiency of technologies. This implies a need to focus on decarbonising energy supply. Furthermore, where energy-efficiency improvements are attempted, they must be considered within the context of a possible rebound effect, which implies that net economy-wide energy savings from energy-efficiency improvements may not be as large as the energy saved directly from the efficiency improvement itself. Both decarbonising energy supply and improving energy efficiency require the rapid development and deployment of new and existing low-carbon technologies. This review therefore concludes by briefly outlining areas of economic thought that have emerged as a result of engagement between economists and experts from other disciplines. They include ecological, evolutionary and institutional economics, all of which can make policy-relevant contributions to achieving a transition to a low-carbon economy

Prenatal organochlorine compound exposure, rapid weight gain, and overweight in infancy.

Science.gov (United States)

Mendez, Michelle A; Garcia-Esteban, Raquel; Guxens, Mónica; Vrijheid, Martine; Kogevinas, Manolis; Goñi, Fernando; Fochs, Silvia; Sunyer, Jordi

2011-02-01

Although it has been hypothesized that fetal exposure to endocrine-disrupting chemicals may increase obesity risk, empirical data are limited, and it is uncertain how early in life any effects may begin. We explored whether prenatal exposure to several organochlorine compounds (OCs) is associated with rapid growth in the first 6 months of life and body mass index (BMI) later in infancy. Data come from the INMA (Infancia y Medio-Ambiente) Child and Environment birth cohort in Spain, which recruited 657 women in early pregnancy. Rapid growth during the first 6 months was defined as a change in weight-for-age z-scores > 0.67, and elevated BMI at 14 months, as a z-score ≥ the 85th percentile. Generalized linear models were used to estimate the risk of rapid growth or elevated BMI associated with 2,2-bis(p-chlorophenyl)-1,1-dichloroethylene (DDE), hexachlorobenzene, β-hexachlorohexane, and polychlorinated biphenyls in first-trimester maternal serum. After multivariable adjustment including other OCs, DDE exposure above the first quartile was associated with doubling of the risk of rapid growth among children of normal-weight (BMI < 25 kg/m2), but not overweight, mothers. DDE was also associated with elevated BMI at 14 months (relative risk per unit increase in log DDE = 1.50; 95% confidence interval, 1.11-2.03). Other OCs were not associated with rapid growth or elevated BMI after adjustment. In this study we found prenatal DDE exposure to be associated with rapid weight gain in the first 6 months and elevated BMI later in infancy, among infants of normal-weight mothers. More research exploring the potential role of chemical exposures in early-onset obesity is needed.

Persistent Environmental Toxicants in Breast Milk and Rapid Infant Growth

NARCIS (Netherlands)

Criswell, Rachel; Lenters, Virissa; Mandal, Siddhartha; Stigum, Hein; Iszatt, Nina; Eggesbø, Merete

2017-01-01

BACKGROUND/AIMS: Many environmental toxicants are passed to infants in utero and through breast milk. Exposure to toxicants during the perinatal period can alter growth patterns, impairing growth or increasing obesity risk. Previous studies have focused on only a few toxicants at a time, which may

Growth of GaN-based non- and semipolar heterostructures for high efficiency light emitters

International Nuclear Information System (INIS)

Wernicke, Tim

2010-01-01

Optoelectronic devices based on GaN and its alloys InGaN and AlGaN are capable of emitting light from the visible to the ultraviolet spectral region. Blue and green lasers have applications in laser projectors, DNA sequencing and spectroscopy. But it is extremely difficult to fabricate green laser diodes. Currently almost all of the light emitting diodes (LEDs) and lasers are grown on GaN crystals that are oriented in the polar (0001) c-plane direction, which provides the most stable growth surface. However the resulting polarization fields on (0001)GaN have detrimental effects on the optical properties of nitride light emitters, e.g. causing significant wavelength shifts and reduced efficiencies in InGaN LEDs. Growth on crystal surfaces with non- and semipolar orientations, e.g. (10 anti 10) m-plane or (11 anti 22), could enable devices with new and improved optical properties. For example, for nonpolar and semipolar LEDs the degree of polarization of the emitted light can be tailored. Furthermore easier to grow devices with green light emission, since the indium incorporation is enhanced for semipolar orientations. In contrast to c-plane GaN there is no polarization field across quantum wells on nonpolar GaN. By reducing the polarization fields an increase in the radiative recombination rate can be expected and would lead to higher LED efficiencies and lower laser thresholds. One of the biggest challenges for the growth of light emitters on non- and semipolar GaN is the choice of a suitable substrate: Heteroepitaxial growth on sapphire or LiAlO 2 allows the deposition of GaN on 2'' diameter wafers and larger. However, these layers show a very high defect density in particular basal plane stacking faults, in comparison to c-plane GaN on sapphire. In order to reduce the defect density we applied successfully epitaxial lateral overgrowth to heteroepitaxial nonpolar a-plane GaN and verified the improvement by spatially and spectrally cathodoluminescence imaging as

Increased water use efficiency does not prevent growth decline of Pinus canariensis in a semi-arid treeline ecotone in Tenerife, Canary Islands (Spain).

Science.gov (United States)

Brito, Patricia; Grams, Thorsten E E; Matysssek, Rainer; Jimenez, Maria S; Gonzalez-Rodríguez, Agueda M; Oberhuber, Walter; Wieser, Gerhard

2016-09-01

Intrinsic water-use efficiency of Pinus canariensis (Sweet ex Spreng.) growing at a semi-arid treeline has increased during the past 37 years. Tree-ring width by contrast has declined, likely caused by reduced stomatal conductance due to increasing aridity. Rising atmospheric CO 2 concentration ( C a ) has been related to tree growth enhancement accompanied by increasing intrinsic water-use-efficiency (iWUE). Nevertheless, the extent of rising C a on long-term changes in iWUE and growth has remained poorly understood to date in Mediterranean treeline ecosystems. This study aimed to examine radial growth and physiological responses of P. canariensis in relation to rising C a and increasing aridity at treeline in Tenerife, Canary Islands, Spain. We evaluated temporal changes in secondary growth (tree-ring width; TRW) and tree ring stable C isotope signature for assessing iWUE from 1975 through 2011. Precipitation was the main factor controlling secondary growth. Over the last 36 years P. canariensis showed a decline in TRW at enhanced iWUE, likely caused by reduced stomatal conductance due to increasing aridity. Our results indicate that increasing aridity has overridden the potential CO 2 fertilization on tree growth of P. canariensis at its upper distribution limit.

Methods and analysis of factors impact on the efficiency of the photovoltaic generation

International Nuclear Information System (INIS)

Li Tianze; Zhang Xia; Jiang Chuan; Hou Luan

2011-01-01

First of all, the thesis elaborates two important breakthroughs which happened In the field of the application of solar energy in the 1950s.The 21st century the development of solar photovoltaic power generation will have the following characteristics: the continued high growth of industrial development, the significantly reducing cost of the solar cell, the large-scale high-tech development of photovoltaic industries, the breakthroughs of the film battery technology, the rapid development of solar PV buildings integration and combined to the grids. The paper makes principles of solar cells the theoretical analysis. On the basis, we study the conversion efficiency of solar cells, find the factors impact on the efficiency of the photovoltaic generation, solve solar cell conversion efficiency of technical problems through the development of new technology, and open up new ways to improve the solar cell conversion efficiency. Finally, the paper connecting with the practice establishes policies and legislation to the use of encourage renewable energy, development strategy, basic applied research etc.

Methods and analysis of factors impact on the efficiency of the photovoltaic generation

Science.gov (United States)

Tianze, Li; Xia, Zhang; Chuan, Jiang; Luan, Hou

2011-02-01

First of all, the thesis elaborates two important breakthroughs which happened In the field of the application of solar energy in the 1950s.The 21st century the development of solar photovoltaic power generation will have the following characteristics: the continued high growth of industrial development, the significantly reducing cost of the solar cell, the large-scale high-tech development of photovoltaic industries, the breakthroughs of the film battery technology, the rapid development of solar PV buildings integration and combined to the grids. The paper makes principles of solar cells the theoretical analysis. On the basis, we study the conversion efficiency of solar cells, find the factors impact on the efficiency of the photovoltaic generation, solve solar cell conversion efficiency of technical problems through the development of new technology, and open up new ways to improve the solar cell conversion efficiency. Finally, the paper connecting with the practice establishes policies and legislation to the use of encourage renewable energy, development strategy, basic applied research etc.

Energy efficiency in India: Assessing the policy regimes and their impacts

International Nuclear Information System (INIS)

Balachandra, P.; Ravindranath, Darshini; Ravindranath, N.H.

2010-01-01

In the recent years, India has emerged as one of the fast growing economies of the world necessitating equally rapid increase in modern energy consumption. With an imminent global climate change threat, India will have difficulties in continuing with this rising energy use levels towards achieving high economic growth. It will have to follow an energy-efficient pathway in attaining this goal. In this context, an attempt is made to present India's achievements on the energy efficiency front by tracing the evolution of policies and their impacts. The results indicate that India has made substantial progress in improving energy efficiency which is evident from the reductions achieved in energy intensities of GDP to the tune of 88% during 1980-2007. Similar reductions have been observed both with respect to overall Indian economy and the major sectors of the economy. In terms of energy intensity of GDP, India occupies a relatively high position of nine among the top 30 energy consuming countries of the world.

HTCC-Modified Nanoclay for Tissue Engineering Applications: A Synergistic Cell Growth and Antibacterial Efficiency

Directory of Open Access Journals (Sweden)

Majid Aliabadi

2013-01-01

Full Text Available This paper deals with the synthesis of a biocompatible chitosan ammonium salt N-(2-hydroxy propyl-3-trimethylammonium chitosan chloride (HTCC and using it in montmorillonite ion-exchange process. HTCC-modified montmorillonite (Mt with different chemical ratios was successfully synthesized, and their characteristics have been verified by XRD and FTIR analyses. Produced samples have been evaluated in terms of antibacterial efficiency and biocompatibility (cell culture test. Antibacterial efficiency of synthesized HTCC/Mt samples has been confirmed against both gram negative bacteria (Escherichia coli and gram positive bacteria (Staphylococcus aureus. The results disclosed that the antibacterial efficiency of HTCC-modified montmorillonite was unexpectedly even more than HTCC. This excellent synergistic effect has been referred to entrapping bacteria between the intercalated structures of HTCC-modified montmorillonite. Then HTCC on clay layers can seriously attack and damage the entrapped bacteria. An extraordinary biocompatibility, cell attachment, and cell growth even more than tissue culture polystyrene (TCPS have been recorded in the case of this novel kind of modified clay. Due to existing concerns about serious and chronic infections after implant placement, this natural-based bioactive and antibacterial modified clay can be used in electrospun nanofibers and other polymeric implants with promising mechanical properties for tissue engineering applications.

Rapid blockade of telomerase activity and tumor cell growth by the DPL lipofection of ribbon antisense to hTR.

Science.gov (United States)

Bajpai, Arun K; Park, Jeong-Hoh; Moon, Ik-Jae; Kang, Hyungu; Lee, Yun-Han; Doh, Kyung-Oh; Suh, Seong-Il; Chang, Byeong-Churl; Park, Jong-Gu

2005-09-29

Ribbon antisense (RiAS) to the hTR RNA, a component of the telomerase complex, was employed to inhibit telomerase activity and cancer cell growth. The antisense molecule, hTR-RiAS, combined with enhanced cellular uptake was shown to effectively inhibit telomerase activity and cause rapid cell death in various cancer cell lines. When cancer cells were treated with hTR-RiAS, the level of hTR RNA was reduced by more than 90% accompanied with reduction in telomerase activity. When checked for cancer cell viability, cancer cell lines treated with hTR-RiAS using DNA+Peptide+Lipid complex showed 70-80% growth inhibition in 3 days. The reduced cell viability was due to apoptosis as the percentage of cells exhibiting the sub-G0 arrest and DNA fragmentation increased after antisense treatment. Further, when subcutaneous tumors of a colon cancer cell line (SW480) were treated intratumorally with hTR-RiAS, tumor growth was markedly suppressed with almost total ablation of hTR RNA in the tumor tissue. Cells in the tumor tissue were also found to undergo apoptosis after hTR-RiAS treatment. These results suggest that hTR-RiAS is an effective anticancer reagent, with a potential for broad efficacy to diverse malignant tumors.

Modeling growth performances, survival, and feed efficiency of four ...

African Journals Online (AJOL)

Evolution of growth rate with age was similar in the four groups, but significant differences of growth curve parameters were found among breeds and/or sexes. Estimated hatch weight was lower in C hens and higher in FT hens. Initial specific growth rates and asymptotic body weight were higher in males for all breeds.

Probing Phosphorus Efficient Low Phytic Acid Content Soybean Genotypes with Phosphorus Starvation in Hydroponics Growth System.

Science.gov (United States)

Kumar, Varun; Singh, Tiratha Raj; Hada, Alkesh; Jolly, Monica; Ganapathi, Andy; Sachdev, Archana

2015-10-01

Phosphorus is an essential nutrient required for soybean growth but is bound in phytic acid which causes negative effects on both the environment as well as the animal nutrition. Lowering of phytic acid levels is associated with reduced agronomic characteristics, and relatively little information is available on the response of soybean plants to phosphorus (P) starvation. In this study, we evaluated the effects of different P starvation concentrations on the phytic acid content, growth, and yield of seven mutant genotypes along with the unirradiated control, JS-335, in a hydroponics growth system. The low phytic acid containing mutant genotypes, IR-JS-101, IR-DS-118, and IR-V-101, showed a relatively high growth rate in low P concentration containing nutrient solution (2 μM), whereas the high P concentration (50 μM) favored the growth of IR-DS-111 and IR-DS-115 mutant genotypes containing moderate phytate levels. The mutant genotypes with high phytic acid content, IR-DS-122, IR-DS-114, and JS-335, responded well under P starvation and did not have any significant effect on the growth and yield of plants. Moreover, the reduction of P concentration in nutrient solution from 50 to 2 μM also reduced the phytic acid content in the seeds of all the soybean genotypes under study. The desirable agronomic performance of low phytic acid containing mutant genotype IR-DS-118 reported in this study suggested it to be a P-efficient genotype which could be considered for agricultural practices under P limiting soils.

Quantification of growth, yield and radiation use efficiency of promising cotton cultivars at varying nitrogen levels

International Nuclear Information System (INIS)

Wajid, A.; Ahmad, A.; Khaliq, T.; Alam, S.; Hussaun, A.; Hussain, K.; Naseem, W.; Usman, M.; Ahmad, S.

2010-01-01

Cotton cultivars response to different doses of nitrogen for radiation interception, canopy development, growth and seed yield were studied in 2006. The experiment was laid out in randomized complete block design with split arrangement under the climatic conditions of Bahawalpur. Data on seed yield, total dry matter (TDM), leaf area index (LAI), fraction of intercepted radiation (Fi), accumulated radiation interception during the growth season (Sa) and radiation use efficiency (RUE) were taken into account. TDM pattern showed sigmoid growth curve for both cultivars and nitrogen levels and showed strong relationship (R2 = 0.98) with the accumulated intercepted radiation (Sa) for the season. Mean maximum value of fraction of incident PAR (Fi) remained 90% at 120 days after sowing (DAS) harvest due to maximum crop canopy development. Cultivar NIAB-111 produced 0.81 g m/sup -2/ of TDM for each MJ of accumulated PAR and nitrogen at the rate of 185 kg ha/sup -1/ statistically proved to be better in converting radiation into dry matter production. (author)

Growth dynamics of Australia's polar dinosaurs.

Science.gov (United States)

Woodward, Holly N; Rich, Thomas H; Chinsamy, Anusuya; Vickers-Rich, Patricia

2011-01-01

Analysis of bone microstructure in ornithopod and theropod dinosaurs from Victoria, Australia, documents ontogenetic changes, providing insight into the dinosaurs' successful habitation of Cretaceous Antarctic environments. Woven-fibered bone tissue in the smallest specimens indicates rapid growth rates during early ontogeny. Later ontogeny is marked by parallel-fibered tissue, suggesting reduced growth rates approaching skeletal maturity. Bone microstructure similarities between the ornithopods and theropods, including the presence of LAGs in each group, suggest there is no osteohistologic evidence supporting the hypothesis that polar theropods hibernated seasonally. Results instead suggest high-latitude dinosaurs had growth trajectories similar to their lower-latitude relatives and thus, rapid early ontogenetic growth and the cyclical suspensions of growth inherent in the theropod and ornithopod lineages enabled them to successfully exploit polar regions.

Barriers' and policies' analysis of China's building energy efficiency

International Nuclear Information System (INIS)

Zhang, Yurong; Wang, Yuanfeng

2013-01-01

With the rapid economic growth and the improvement of people's living standards, China's building energy consumption has kept rising during the past 15 years. Under the effort of the Chinese government and the society, China's building energy efficiency has made certain achievements. However, the implementation of building energy efficiency in China is still far from its potential. Based on the analysis of the existing policies implemented in China, the article concluded that the most essential and the most effective ways to promote building energy efficiency is the government's involvement as well as economic and financial incentives. In addition, the main barriers in the process of promoting building energy efficiency in China are identified in six aspects. It has been found that the legal system and administrative issues constitute major barriers, and the lack of financial incentives and the mismatching of market mechanism also hamper the promotion of building energy efficiency. Finally, in view of the existing policies and barriers analysis, three corresponding policy proposals are presented. -- Highlights: •The existing policies implemented in China from three aspects are presented and analysed. •The Government's involvement is the most essential effective way to promote building-energy efficiency. •Six aspects of barriers in promoting building energy efficiency in China are identified. •The legal system and administrative issues constitute the major barriers. •Three policy proposals to further promote building energy efficiency in China are proposed

Application tests of a new-type LNG rapid gasification unit

Directory of Open Access Journals (Sweden)

Ping Yan

2017-01-01

Full Text Available Liquefied natural gas (LNG is stored under low temperature and high pressure. It has to be gasified before it is used. Therefore, LNG gasification unit is essential and it is vital to the high-efficiency utilization of LNG. In this paper, a new-type LNG rapid gasification unit was developed. Adopted in this unit are some innovative technologies authorized with the national patent of invention, such as the umbrella-shape gas flow circle unit, the flue gas circulation system and the water feeding system, which help to guarantee its operation safety and increase its operation efficiency. After it was justified in lab test, the unit for industrial application was designed and manufactured and then tested to verify its design rationality. The results show that the new-type LNG rapid gasification unit meets the design requirements in the aspect of efficiency, exhaust gas loss, radiation loss and fuel gas consumption rate; at a load of 1800–2200 m3/h, its efficiency is over 95%; at a load of 1976.0 m3/h which is close to the design value of 2000 m3/h, its efficiency is 96.34% or even up to 2800 m3/h. This new-type LNG rapid gasification unit is adaptable to a large range of loads and can adapt to the rapid increase of external load. Its fuel gas consumption rate is only 1.5%, which is in the range of energy conservation. It presents the advantages of high heating efficiency, rapid startup, high gasification rate, compact structure, small land occupation and invulnerability to the environment, therefore, it is applicable to the middle and small independent regions which cannot be connected to the natural gas supply pipeline networks due to various reasons.

Optimizing nitrification in biological rapid sand filters for drinking water production

DEFF Research Database (Denmark)

Albrechtsen, Hans-Jørgen; Smets, Barth F.; Lee, Carson Odell

Addition of phosphate or trace metals or better management e.g. in terms of anmonium load can improve the nitrification rate and efficiency in biological rapid sand filters.......Addition of phosphate or trace metals or better management e.g. in terms of anmonium load can improve the nitrification rate and efficiency in biological rapid sand filters....

Rapid, Selection-Free, High-Efficiency Genome Editing in Protozoan Parasites Using CRISPR-Cas9 Ribonucleoproteins

Directory of Open Access Journals (Sweden)

Lia Carolina Soares Medeiros

2017-11-01

Full Text Available Trypanosomatids (order Kinetoplastida, including the human pathogens Trypanosoma cruzi (agent of Chagas disease, Trypanosoma brucei, (African sleeping sickness, and Leishmania (leishmaniasis, affect millions of people and animals globally. T. cruzi is considered one of the least studied and most poorly understood tropical disease-causing parasites, in part because of the relative lack of facile genetic engineering tools. This situation has improved recently through the application of clustered regularly interspaced short palindromic repeats–CRISPR-associated protein 9 (CRISPR-Cas9 technology, but a number of limitations remain, including the toxicity of continuous Cas9 expression and the long drug marker selection times. In this study, we show that the delivery of ribonucleoprotein (RNP complexes composed of recombinant Cas9 from Staphylococcus aureus (SaCas9, but not from the more routinely used Streptococcus pyogenes Cas9 (SpCas9, and in vitro-transcribed single guide RNAs (sgRNAs results in rapid gene edits in T. cruzi and other kinetoplastids at frequencies approaching 100%. The highly efficient genome editing via SaCas9/sgRNA RNPs was obtained for both reporter and endogenous genes and observed in multiple parasite life cycle stages in various strains of T. cruzi, as well as in T. brucei and Leishmania major. RNP complex delivery was also used to successfully tag proteins at endogenous loci and to assess the biological functions of essential genes. Thus, the use of SaCas9 RNP complexes for gene editing in kinetoplastids provides a simple, rapid, and cloning- and selection-free method to assess gene function in these important human pathogens.

Temperature Effect Study on Growth and Survival of Pathogenic Vibrio parahaemolyticus in Jinjiang Oyster (Crassostrea rivularis with Rapid Count Method

Directory of Open Access Journals (Sweden)

Yuan Wang

2018-01-01

Full Text Available The growth of Vibrio parahaemolyticus (V. parahaemolyticus in oysters during postharvest storage increases the possibility of its infection in humans. In this work, to investigate the growth or survival profiles in different media, pathogenic V. parahaemolyticus in APW, Jinjiang oyster (JO, Crassostrea rivularis slurry, and live JO were studied under different temperatures. All the strain populations were counted through our double-layer agar plate (DLAP method. In APW, the pathogenic V. parahaemolyticus showed continuous growth under 15, 25, and 35°C, while a decline in behavior was displayed under 5°C. The similar survival trend of pathogenic V. parahaemolyticus in JO slurry and live JO was observed under 5, 25, and 35°C, except the delayed growth or decline profile compared to APW. Under 15°C, they displayed decline and growth profile in JO slurry and live JO, respectively. These results indicate the different sensitivity of pathogenic V. parahaemolyticus in these matrices to temperature variation. Furthermore, nonpathogenic V. parahaemolyticus displayed little difference in survival profiles when inoculated in live JO under corresponding temperatures. The results indicate that inhibition or promotion effect could be regulated under different storage temperature for both pathogenic and nonpathogenic strains. Besides, the DLAP method showed the obvious quickness and efficiency during the bacteria count.

Sustainable development and low carbon growth strategy for India

International Nuclear Information System (INIS)

Parikh, Kirit

2012-01-01

For India, sustainable strategy means one that is economically, environmentally and socially sustainable. This calls for rapid economic growth to deal with poverty and human development. However, the relatively meagre energy resources of the country pose a huge challenge. At the same time concern for climate change has raised the bar on the use of the one energy resource that India has in some abundance, namely coal. India's strategy for sustainable development has to explore all options of reducing energy needs, enhancing efficiency of use of conventional energy resources and develop new and renewable sources. The paper identifies various technical options, their potential roles and alternative policy measures to realize them in a cost effective manner. Even for the same objectives different policy instruments are available and how one chooses a particular instrument is often critical for the success. Self-implementing incentive compatible policy that does not create vested interests that would get entrenched should be preferred. -- Highlights: ► Energy efficiency is critical for sustainable development. ► India can reduce its emission intensity by 25 % by 2020 as proposed by India at Copenhagen. ► With a more aggressive effort even 35% reduction is attainable even with 8% or 9% growth. ► Energy efficient appliances, vehicles, buildings and industrial processes are needed. ► Policies that incentivize adoption of these pose critical challenges.

Growth dynamics of Australia's polar dinosaurs.

Directory of Open Access Journals (Sweden)

Holly N Woodward

Full Text Available Analysis of bone microstructure in ornithopod and theropod dinosaurs from Victoria, Australia, documents ontogenetic changes, providing insight into the dinosaurs' successful habitation of Cretaceous Antarctic environments. Woven-fibered bone tissue in the smallest specimens indicates rapid growth rates during early ontogeny. Later ontogeny is marked by parallel-fibered tissue, suggesting reduced growth rates approaching skeletal maturity. Bone microstructure similarities between the ornithopods and theropods, including the presence of LAGs in each group, suggest there is no osteohistologic evidence supporting the hypothesis that polar theropods hibernated seasonally. Results instead suggest high-latitude dinosaurs had growth trajectories similar to their lower-latitude relatives and thus, rapid early ontogenetic growth and the cyclical suspensions of growth inherent in the theropod and ornithopod lineages enabled them to successfully exploit polar regions.

Optimisation of pressurised liquid extraction (PLE) for rapid and efficient extraction of superficial and total mineral oil contamination from dry foods.

Science.gov (United States)

Moret, Sabrina; Scolaro, Marianna; Barp, Laura; Purcaro, Giorgia; Sander, Maren; Conte, Lanfranco S

2014-08-15

Pressurised liquid extraction (PLE) represents a powerful technique which can be conveniently used for rapid extraction of mineral oil saturated (MOSH) and aromatic hydrocarbons (MOAH) from dry foods with a low fat content, such as semolina pasta, rice, and other cereals. Two different PLE methods, one for rapid determination of superficial contamination mainly from the packaging, the other for efficient extraction of total contamination from different sources, have been developed and optimised. The two methods presented good performance characteristics in terms of repeatability (relative standard deviation lower than 5%) and recoveries (higher than 95%). To show their potentiality, the two methods have been applied in combination on semolina pasta and rice packaged in direct contact with recycled cardboard. In the case of semolina pasta it was possible to discriminate between superficial contamination coming from the packaging, and pre-existing contamination (firmly enclosed into the matrix). Copyright © 2014 Elsevier Ltd. All rights reserved.

Assessment of Root Morphological Traits of 16 Tropical and Four Temperate Maize Cultivars for Nitrogen Efficiency in Short-Term Nutrient Solution Experiments with the Cigar Roll and Growth Pouch Methods

Energy Technology Data Exchange (ETDEWEB)

Saifu, S.; Schulte auf' m Erley, G.; Horst, W. J. [Institute for Plant Nutrition, Leibniz University of Hannover (Germany)

2013-11-15

Genotypic differences in N efficiency of maize have been reported by many authors. One of the reasons responsible for genotypic differences in N efficiency is differences in N uptake efficiency after anthesis. Continuous root growth and N uptake activity are responsible for the high N uptake efficiency of N-efficient genotypes. This study was conducted mainly to identify root parameters which could be used as secondary selection traits for genotypic differences in N efficiency of maize established in field experiments. The specific objective of the first experiment was to establish a relationship between root parameters with genotypic differences in N efficiency in the field, and to identify root traits to be used as secondary selection criteria for N efficiency. Four temperate and 16 tropical genotypes were grown in low-N nutrient solution with a cigar roll and a growth pouch culture for 9 and 10 days, respectively. In the cigar roll experiment individual root fractions (adventitious, seminal and primary root fractions) and in growth pouch experiment root distribution and root branching angle were of primary interest. Genotypic differences were found in most of the root traits, but the differences were not clear cut between N-efficient and inefficient genotypes with few exceptions. The N-efficient genotypes had the highest percentage of root length in the deepest (>20 cm) interval in the growth pouch, which also positively correlated with N uptake after anthesis and grain yield. The N-efficient genotypes also had a high percentage of roots in the root branching angle interval of 60-90{sup o}. It was concluded that the high N uptake efficiency of N-efficient genotypes might be related to a higher percentage of roots growing downwards (high branching angle) and a high percentage of root length in deeper soil layers enabling them to exploit nitrate in the subsoil more efficiently. These two root parameters were found promising to use as selection criteria for N

A simple microfluidic platform for rapid and efficient production of the radiotracer [18F]fallypride.

Science.gov (United States)

Zhang, Xin; Liu, Fei; Knapp, Karla-Anne; Nickels, Michael L; Manning, H Charles; Bellan, Leon M

2018-05-01

Herein, we report the development of a simple, high-throughput and efficient microfluidic system for synthesizing radioactive [18F]fallypride, a PET imaging radiotracer widely used in medical research. The microfluidic chip contains all essential modules required for the synthesis and purification of radioactive fallypride. The radiochemical yield of the tracer is sufficient for multiple animal injections for preclinical imaging studies. To produce the on-chip concentration and purification columns, we employ a simple "trapping" mechanism by inserting rows of square pillars with predefined gaps near the outlet of microchannel. Microspheres with appropriate functionality are suspended in solution and loaded into the microchannels to form columns for radioactivity concentration and product purification. Instead of relying on complicated flow control elements (e.g., micromechanical valves requiring complex external pneumatic actuation), external valves are utilized to control transfer of the reagents between different modules. The on-chip ion exchange column can efficiently capture [18F]fluoride with negligible loss (∼98% trapping efficiency), and subsequently release a burst of concentrated [18F]fluoride to the reaction cavity. A thin layer of PDMS with a small hole in the center facilitates rapid and reliable water evaporation (with the aid of azeotropic distillation and nitrogen flow) while reducing fluoride loss. During the solvent exchange and fluorination reaction, the entire chip is uniformly heated to the desired temperature using a hot plate. All aspects of the [18F]fallypride synthesis were monitored by high-performance liquid chromatography (HPLC) analysis, resulting in labelling efficiency in fluorination reaction ranging from 67-87% (n = 5). Moreover, after isolating unreacted [18F]fluoride, remaining fallypride precursor, and various by-products via an on-chip purification column, the eluted [18F]fallypride is radiochemically pure and of a sufficient

Does Rapid and Sustained Economic Growth Lead to Convergence in Health Resources: The Case of China From 1980 to 2010.

Science.gov (United States)

Liang, Di; Zhang, Donglan; Huang, Jiayan; Schweitzer, Stuart

2016-01-01

China's rapid and sustained economic growth offers an opportunity to ask whether the advantages of growth diffuse throughout an economy, or remain localized in areas where the growth has been the greatest. A critical policy area in China has been the health system, and health inequality has become an issue that has led the government to broaden national health insurance programs. This study investigates whether health system resources and performance have converged over the past 30 years across China's 31 provinces. To examine geographic variation of health system resources and performance at the provincial level, we measure the degree of sigma convergence and beta convergence in indicators of health system resources (structure), health services utilization (process), and outcome. All data are from officially published sources: the China Health Statistics Year Book and the China Statistics Year Book. Sigma convergence is found for resource indicators, whereas it is not observed for either process or outcome indicators, indicating that disparities only narrowed in health system resources. Beta convergence is found in most indicators, except for 2 procedure indicators, reflecting that provinces with poorer resources were catching up. Convergence found in this study probably reflects the mixed outcome of government input, and market forces. Thus, left alone, the equitable distribution of health care resources may not occur naturally during a period of economic growth. Governmental and societal efforts are needed to reduce geographic health variation and promote health equity. © The Author(s) 2016.

Ethylene production throughout growth and development of plants

Science.gov (United States)

Wheeler, Raymond M.; Peterson, Barbara V.; Stutte, Gary W.

2004-01-01

Ethylene production by 10 or 20 m2 stands of wheat, soybean, lettuce, potato, and tomato was monitored throughout growth and development in an atmospherically closed plant chamber. Chamber ethylene levels varied among species and rose during periods of canopy expansion and rapid growth for all species. Following this, ethylene levels either declined during seed fill and maturation for wheat and soybean, or remained relatively constant for potato and tomato (during flowering and early fruit development). Lettuce plants were harvested during rapid growth and peak ethylene production. Chamber ethylene levels increased rapidly during tomato ripening, reaching concentrations about 10 times that measured during vegetative growth. The highest ethylene production rates during vegetative growth ranged from 1.6 to 2.5 nmol m-2 d-1 during rapid growth of lettuce and wheat stands, or about 0.3 to 0.5 nmol g-1 fresh weight per hour. Estimates of stand ethylene production during tomato ripening showed that rates reached 43 nmol m-2 d-1 in one study and 93 nmol m-2 d-1 in a second study with higher lighting, or about 50x that of the rate during vegetative growth of tomato. In a related test with potato, the photoperiod was extended from 12 to 24 hours (continuous light) at 58 days after planting (to increase tuber yield), but this change in the environment caused a sharp increase in ethylene production from the basal rate of 0.4 to 6.2 nmol m-2 d-1. Following this, the photoperiod was changed back to 12 h at 61 days and ethylene levels decreased. The results suggest three separate categories of ethylene production were observed with whole stands of plants: 1) production during rapid vegetative growth, 2) production during climacteric fruit ripening, and 3) production from environmental stress.

Reuse and recovery of raw materials: Towards the achievement of a resource-efficient society

International Nuclear Information System (INIS)

Brunori, Claudia; Cutaia, Laura; Norabito, Roberto

2015-01-01

Resource efficiency plays a key role in the transition from a linear to a circular economy system. During the last few decades a rapid growth in the number of materials used across complex products has occurred. Given the high economic importance of critical raw materials combined with relatively high supply risk, securing reliable and undistorted access of certain raw materials is of growing concern across the globe. Development of eco-innovative approaches devoted to closing the loop of resources is strongly needed, allowing the connection between production cycles and their territory.

Comparison of the efficiencies of attached- versus suspended-growth SBR systems in the treatment of recycled paper mill wastewater.

Science.gov (United States)

Muhamad, Mohd Hafizuddin; Sheikh Abdullah, Siti Rozaimah; Abu Hasan, Hassimi; Abd Rahim, Reehan Adnee

2015-11-01

The complexity of residual toxic organics from biologically treated effluents of pulp and paper mills is a serious concern. To date, it has been difficult to choose the best treatment technique because each of the available options has advantages and drawbacks. In this study, two different treatment techniques using laboratory-scale aerobic sequencing batch reactors (SBRs) were tested with the same real recycled paper mill effluent to evaluate their treatment efficiencies. Two attached-growth SBRs using granular activated carbon (GAC) with and without additional biomass and a suspended-growth SBR were used in the treatment of real recycled paper mill effluent at a chemical oxygen demand (COD) level in the range of 800-1300 mg/L, a fixed hydraulic retention time of 24 h and a COD:N:P ratio of approximately 100:5:1. The efficiency of this biological treatment process was studied over a 300-day period. The six most important wastewater quality parameters, namely, chemical oxygen demand (COD), turbidity, ammonia (expressed as NH3-N), phosphorus (expressed as PO4(3)-P), colour, and suspended solids (SS), were measured to compare the different treatment techniques. It was determined that these processes were able to almost completely and simultaneously eliminate COD (99%) and turbidity (99%); the removals of NH3-N (90-100%), PO4(3)-P (66-78%), colour (63-91%), and SS (97-99%) were also sufficient. The overall performance results confirmed that an attached-growth SBR system using additional biomass on GAC is a promising configuration for wastewater treatment in terms of performance efficiency and process stability under fluctuations of organic load. Hence, this hybrid system is recommended for the treatment of pulp and paper mill effluents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Managing carbon emissions in China through building energy efficiency.

Science.gov (United States)

Li, Jun; Colombier, Michel

2009-06-01

This paper attempts to analyse the role of building energy efficiency (BEE) in China in addressing climate change mitigation. It provides an analysis of the current situation and future prospects for the adoption of BEE technologies in Chinese cities. It outlines the economic and institutional barriers to large-scale deployment of the sustainable, low-carbon, and even carbon-free construction techniques. Based on a comprehensive overview of energy demand characteristics and development trends driven by economic and demographic growth, different policy tools for cost-effective CO(2) emission reduction in the Chinese construction sector are described. We propose a comprehensive approach combining building design and construction, and the urban planning and building material industries, in order to drastically improve BEE during this period of rapid urban development. A coherent institutional framework needs to be established to ensure the implementation of efficiency policies. Regulatory and incentive options should be integrated into the policy portfolios of BEE to minimise the efficiency gap and to realise sizeable carbon emissions cuts in the next decades. We analyse in detail several policies and instruments, and formulate relevant policy proposals fostering low-carbon construction technology in China. Specifically, Our analysis shows that improving building energy efficiency can generate considerable carbon emissions reduction credits with competitive price under the CDM framework.

An efficient computational method for global sensitivity analysis and its application to tree growth modelling

International Nuclear Information System (INIS)

Wu, Qiong-Li; Cournède, Paul-Henry; Mathieu, Amélie

2012-01-01

Global sensitivity analysis has a key role to play in the design and parameterisation of functional–structural plant growth models which combine the description of plant structural development (organogenesis and geometry) and functional growth (biomass accumulation and allocation). We are particularly interested in this study in Sobol's method which decomposes the variance of the output of interest into terms due to individual parameters but also to interactions between parameters. Such information is crucial for systems with potentially high levels of non-linearity and interactions between processes, like plant growth. However, the computation of Sobol's indices relies on Monte Carlo sampling and re-sampling, whose costs can be very high, especially when model evaluation is also expensive, as for tree models. In this paper, we thus propose a new method to compute Sobol's indices inspired by Homma–Saltelli, which improves slightly their use of model evaluations, and then derive for this generic type of computational methods an estimator of the error estimation of sensitivity indices with respect to the sampling size. It allows the detailed control of the balance between accuracy and computing time. Numerical tests on a simple non-linear model are convincing and the method is finally applied to a functional–structural model of tree growth, GreenLab, whose particularity is the strong level of interaction between plant functioning and organogenesis. - Highlights: ► We study global sensitivity analysis in the context of functional–structural plant modelling. ► A new estimator based on Homma–Saltelli method is proposed to compute Sobol indices, based on a more balanced re-sampling strategy. ► The estimation accuracy of sensitivity indices for a class of Sobol's estimators can be controlled by error analysis. ► The proposed algorithm is implemented efficiently to compute Sobol indices for a complex tree growth model.

Molecular beam epitaxy growth of In0.52Al0.48As/In0.53Ga0.47As metamorphic high electron mobility transistor employing growth interruption and in situ rapid thermal annealing

International Nuclear Information System (INIS)

Ihn, Soo-Ghang; Jo, Seong June; Song, Jong-In

2006-01-01

We investigated the effects of high temperature (∼700 deg. C) in situ rapid thermal annealing (RTA) carried out during growth interruption between spacer and δ-doping layers of an In 0.52 Al 0.48 As/In 0.53 Ga 0.47 As metamorphic high electron mobility transistor (MHEMT) grown on a compositionally graded InGaAlAs buffer layer. The in situ RTA improved optical and structural properties of the MHEMT without degradation of transport property, while postgrowth RTA improved the structural property of the MHEMT but significantly degraded mobility due to the defect-assisted Si diffusion. The results indicate the potential of the in situ RTA for use in the growth of high-quality metamorphic epitaxial layers for optoelectronic applications requiring improved optical and electrical properties

Analysis of the influence of external factors on efficiency of use of resource potential and economic growth of the region

Directory of Open Access Journals (Sweden)

M. P. Vasiliev

2017-01-01

Full Text Available In the article are described and analyzed the influence of factors of external and internal environments on maintaining the planned economic growth, efficient use of the resource potential of the regional economic complex. Are provided methods of analysis and comprehensive measures to maintain the planned pace of economic growth of the region, expansion of competitive advantages. Enlargement and generalization determine the impact of economic environmental factors, in accordance with the duration of optimization and changes in the business cycle, provide a high level of confidence in the estimates of the impact of the macro environment on the process of achieving economic success, efficient use of the resource potential of the regional economic complex. Analysis of the internal conditions of region is carried out by management on the basis of establishing the optimal values of the distribution of the resource potential for high-priority, economically viable, and socially important areas of efficient use of logistical, labor, information, and natural resources, analysis of the current or having a tendency to the formation of informal communities in the sectoral components of economic activities, industrial complexes and social services. The possibilities of the availability and abilities of the region to influence the structural components in achieving the economic and financial goals of the activity are considered, including ensuring sustainable dynamics in increasing the efficiency of regional production, providing competitive advantages in the use of consumed resources. The factors proposed for consideration, different management of the regional economy, contribute to the creation of both formal and informal organizational and economic communities, taking into account the interests of all its participants. In addition, mechanisms and tools are proposed that facilitate the creation of favorable conditions for participants in informal clusters

Efficient and equitable spatial allocation of renewable power plants at the country scale

Science.gov (United States)

Drechsler, Martin; Egerer, Jonas; Lange, Martin; Masurowski, Frank; Meyerhoff, Jürgen; Oehlmann, Malte

2017-09-01

Globally, the production of renewable energy is undergoing rapid growth. One of the most pressing issues is the appropriate allocation of renewable power plants, as the question of where to produce renewable electricity is highly controversial. Here we explore this issue through analysis of the efficient and equitable spatial allocation of wind turbines and photovoltaic power plants in Germany. We combine multiple methods, including legal analysis, economic and energy modelling, monetary valuation and numerical optimization. We find that minimum distances between renewable power plants and human settlements should be as small as is legally possible. Even small reductions in efficiency lead to large increases in equity. By considering electricity grid expansion costs, we find a more even allocation of power plants across the country than is the case when grid expansion costs are neglected.

Rapid and Efficient Conversion of (11) CO2 to (11) CO through Silacarboxylic Acids: Applications in Pd-Mediated Carbonylations.

Science.gov (United States)

Nordeman, Patrik; Friis, Stig D; Andersen, Thomas L; Audrain, Hélène; Larhed, Mats; Skrydstrup, Troels; Antoni, Gunnar

2015-12-01

Herein, we present a new rapid, efficient, and low-cost radiosynthetic protocol for the conversion of (11) CO2 to (11) CO and its subsequent application in Pd-mediated reactions of importance for PET applications. This room-temperature methodology, using readily available chemical reagents, is carried out in simple glass vials, thus eliminating the need for expensive and specialized high-temperature equipment to access (11) CO. With this fast and near-quantitative conversion of (11) CO2 into (11) CO, aryl and heteroaryl iodides were easily converted into a broad selection of biologically active amides in radiochemical yields ranging from 29-84 %. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

THE ANALYSIS OF TOTAL EXPENSES AT 1000 LEI TOTAL REVENUES AND OF THE RESULT OF THE GROWTH OF THEIR EFFICIENCY

Directory of Open Access Journals (Sweden)

LĂPĂDUŞI MIHAELA LOREDANA

2013-12-01

Full Text Available act The analysis of the company’s expenses is mainly important in the management and control activity, because it highlights the way in which are used the resources (material, human, financial and the impact of their allocation on the company’s performances. The optimization of the level of costs or the their reduction, where it is possible, without affecting the quality of the products and working conditions of the activity, represent the primary objectives of the management of companies.[9] Expenses have been and will remain one of the key indicators of a company requiring continuous application of a control and monitoring mechanism because when it comes to expenses we never speak of their growth, but their reduction. This reduction is the main objective of any economic agent that will result in increasing the efficiency of the entire activity. The costs of a company reflect in cash the total consumption of material, human and financial resources used in manufacturing and selling of the products. The level, dynamics and structure of these expenses reflect synthetically the activity of industrial enterprises when using effectively the available resources. The purpose of this article is to analyze synthetically a company's expenses efficiency based on the efficiency ratio of total expenses at 1000 lei total revenues and the purpose of the article results in a set of conclusions that will highlight a number of important issues concerning the role and the importance of the efficiency of total expenses related to total revenue, as well as the result of the growth of the efficiency of total expenses.

Effect of radiation environment on radiation use efficiency and growth of sunflower

International Nuclear Information System (INIS)

Bange, M.P.; Hammer, G.L.; Rickert, K.G.

1997-01-01

The level of incident radiation and the proportion of radiation that is diffuse affects radiation use efficiency (RUE) in crops. However, the degree of this effect, and its importance to growth and yield of sunflower (Helianthus annuus L.) have not been established. A field experiment was conducted to investigate the effects of radiation environment on RUE, growth, and yield of sunflower. A fully irrigated crop was sown on an alluvial-prairie soil (Fluventic Haplustoll) and was exposed to three distinct radiation environments. In two treatments, the level of incident radiation was reduced by 14 and 20% by suspending two different types of polyethylene plastic films well above the crop. In addition to the reductions in incident radiation, the proportion of radiation that was diffuse was increased by about 14% in these treatments. Lower incident radiation and increased proportion of diffuse radiation had no effect on total biomass, phenology, leaf area, and the canopy light extinction coefficient (k = 0.89). However, yield was reduced in shaded treatments due to smaller grain size and lower harvest index. Although crop RUE measured over the entire crop cycle (1.25 g/MJ) did not differ significantly among treatments, there was a trend where RUE compensated for less intercepted incident radiation. Theoretical derivations of the response of RUE to different levels of incident radiation supported this finding. Shaded sunflower crops have the ability to produce biomass similar to unshaded crops by increasing RUE, but have lower harvest indices

A bi-paratopic anti-EGFR nanobody efficiently inhibits solid tumour growth

Science.gov (United States)

Roovers, Rob C.; Vosjan, Maria J.W.D.; Laeremans, Toon; el Khoulati, Rachid; de Bruin, Renée C.G.; Ferguson, Kathryn M.; Verkleij, Arie J.; van Dongen, Guus A.M.S.; van Bergen en Henegouwen, Paul M. P.

2014-01-01

The epidermal growth factor receptor (EGFR) has been shown to be a valid cancer target for antibody-based therapy. At present, several anti-EGFR monoclonal antibodies (mAbs) have been successfully used, among which cetuximab and matuzumab. X-ray crystallography data show that these antibodies bind to different epitopes on the ecto-domain of EGFR, providing a rationale for the combined use of these two antibody specificities. We have previously reported on the successful isolation of antagonistic anti-EGFR nanobodies. In the present study, we aimed to improve on these molecules by combining nanobodies with specificities similar to both cetuximab and matuzumab into a single bi-paratopic molecule. Carefully designed phage nanobody selections resulted in two sets of nanobodies that specifically blocked the binding of either matuzumab or of cetuximab to EGFR and that did not compete for each others binding. A combination of nanobodies from both epitope groups into the bi-paratopic nanobody CONAN-1 was shown to block EGFR activation more efficiently than monovalent or bivalent (monospecific) nanobodies. In addition, this bi-paratopic nanobody potently inhibited EGF-dependent cell proliferation. Importantly, in an in vivo model of athymic mice bearing A431 xenografts, CONAN-1 inhibited tumour outgrowth with an almost similar potency as the whole mAb cetuximab, despite the fact that CONAN-1 is devoid of an Fc portion that could mediate immune effector functions. Compared to therapy using bivalent, mono-specific nanobodies, CONAN-1 was clearly more potent in tumour growth inhibition. These results show that the rational design of bi-paratopic nanobody-based anti-cancer therapeutics may yield potent lead molecules for further development. PMID:21520037

Long-term optimization of the transport sector to address greenhouse gas reduction targets under rapid growth. Application of an energy system model for Gauteng province, South Africa

Energy Technology Data Exchange (ETDEWEB)

Tomaschek, Jan

2013-12-11

The transport sector is seen as one of the key factors for driving future energy consumption and greenhouse gas (GHG) emissions. Especially in developing countries, significant growth in transport demand is expected. Gauteng province, as the economic centre of South Africa and transport hub for the whole of southern Africa, is one emerging urban region that faces rapid growth. However, the province is on its way to playing a leading role for supporting ways to adapt to climate change and mitigate GHG emissions. Conversely, there is a lack of scientific research on the promising measures for GHG mitigation in the transport sector. For the rapidly growing transport sector of the province in particular, research is focused primarily on extending and structuring the road infrastructure. Moreover, it is important that the transport sector is considered as part of the whole energy system, as significant contributions to GHG emissions and the associated costs arise from energy supply, provision and conversion. This research is the first application of an integrated energy system model (i.e. the TIMES-GEECO model) for the optimization of the transport sector of Gauteng. Optimizing energy system models allows finding least-cost measures for various scenarios, by considering dependencies and interlinkages in the energy system as well as environmental constraints. To do so, the transport sector and the energy supply sector had to be incorporated into the model application in terms of the characteristics of a developing urban region, which includes all relevant transport modes, vehicle technologies, fuel options, vehicle-to-grid energy storage, the consideration of road types as well as explicit expansions of the public transport system and income-dependent travel demand modelling. Additionally, GHG mitigation options outside the provincial boundaries were incorporated to allow for mitigation at least cost and to consider regional resource availability. Moreover, in TIMES

Long-term optimization of the transport sector to address greenhouse gas reduction targets under rapid growth. Application of an energy system model for Gauteng province, South Africa

International Nuclear Information System (INIS)

Tomaschek, Jan

2013-01-01

The transport sector is seen as one of the key factors for driving future energy consumption and greenhouse gas (GHG) emissions. Especially in developing countries, significant growth in transport demand is expected. Gauteng province, as the economic centre of South Africa and transport hub for the whole of southern Africa, is one emerging urban region that faces rapid growth. However, the province is on its way to playing a leading role for supporting ways to adapt to climate change and mitigate GHG emissions. Conversely, there is a lack of scientific research on the promising measures for GHG mitigation in the transport sector. For the rapidly growing transport sector of the province in particular, research is focused primarily on extending and structuring the road infrastructure. Moreover, it is important that the transport sector is considered as part of the whole energy system, as significant contributions to GHG emissions and the associated costs arise from energy supply, provision and conversion. This research is the first application of an integrated energy system model (i.e. the TIMES-GEECO model) for the optimization of the transport sector of Gauteng. Optimizing energy system models allows finding least-cost measures for various scenarios, by considering dependencies and interlinkages in the energy system as well as environmental constraints. To do so, the transport sector and the energy supply sector had to be incorporated into the model application in terms of the characteristics of a developing urban region, which includes all relevant transport modes, vehicle technologies, fuel options, vehicle-to-grid energy storage, the consideration of road types as well as explicit expansions of the public transport system and income-dependent travel demand modelling. Additionally, GHG mitigation options outside the provincial boundaries were incorporated to allow for mitigation at least cost and to consider regional resource availability. Moreover, in TIMES

Novel insight into the origin of the growth dynamics of sauropod dinosaurs.

Directory of Open Access Journals (Sweden)

Ignacio Alejandro Cerda

Full Text Available Sauropod dinosaurs include the largest terrestrial animals and are considered to have uninterrupted rapid rates of growth, which differs from their more basal relatives, which have a slower cyclical growth. Here we examine the bone microstructure of several sauropodomorph dinosaurs, including basal taxa, as well as the more derived sauropods. Although our results agree that the plesiomorphic condition for Sauropodomorpha is cyclical growth dynamics, we found that the hypothesized dichotomy between the growth patterns of basal and more derived sauropodomorphs is not supported. Here, we show that sauropod-like growth dynamics of uninterrupted rapid growth also occurred in some basal sauropodomorphs, and that some basal sauropods retained the plesiomorphic cyclical growth patterns. Among the sauropodomorpha it appears that the basal taxa exploited different growth strategies, but the more derived Eusauropoda successfully utilized rapid, uninterrupted growth strategies.

Novel insight into the origin of the growth dynamics of sauropod dinosaurs.

Science.gov (United States)

Cerda, Ignacio Alejandro; Chinsamy, Anusuya; Pol, Diego; Apaldetti, Cecilia; Otero, Alejandro; Powell, Jaime Eduardo; Martínez, Ricardo Nestor

2017-01-01

Sauropod dinosaurs include the largest terrestrial animals and are considered to have uninterrupted rapid rates of growth, which differs from their more basal relatives, which have a slower cyclical growth. Here we examine the bone microstructure of several sauropodomorph dinosaurs, including basal taxa, as well as the more derived sauropods. Although our results agree that the plesiomorphic condition for Sauropodomorpha is cyclical growth dynamics, we found that the hypothesized dichotomy between the growth patterns of basal and more derived sauropodomorphs is not supported. Here, we show that sauropod-like growth dynamics of uninterrupted rapid growth also occurred in some basal sauropodomorphs, and that some basal sauropods retained the plesiomorphic cyclical growth patterns. Among the sauropodomorpha it appears that the basal taxa exploited different growth strategies, but the more derived Eusauropoda successfully utilized rapid, uninterrupted growth strategies.

Driving factors of urban land growth in Guangzhou and its implications for sustainable development

Science.gov (United States)

Cui, Xuezhu; Li, Shaoying; Wang, Xuetong; Xue, Xiaolong

2018-04-01

Since 2000, China's urban land has expanded at a dramatic speed because of the country's rapid urbanization. The country has been experiencing unbalanced development between rural and urban areas, causing serious challenges such as agricultural security and land resources waste. Effectively evaluating the driving factors of urban land growth is essential for improving efficient land use management and sustainable urban development. This study established a principal component regression model based on eight indicators to identify their influences on urban land growth in Guangzhou. The results provided a grouping analysis of the driving factors, and found that economic growth, urban population, and transportation development are the driving forces of urban land growth of Guangzhou, while the tertiary industry has an opposite effect. The findings led to further suggestions and recommendations for urban sustainable development. Hence, local governments should design relevant policies for achieving the rational development of urban land use and strategic planning on urban sustainable development.

An efficient, versatile and scalable pattern growth approach to mine frequent patterns in unaligned protein sequences.

Science.gov (United States)

Ye, Kai; Kosters, Walter A; Ijzerman, Adriaan P

2007-03-15

Pattern discovery in protein sequences is often based on multiple sequence alignments (MSA). The procedure can be computationally intensive and often requires manual adjustment, which may be particularly difficult for a set of deviating sequences. In contrast, two algorithms, PRATT2 (http//www.ebi.ac.uk/pratt/) and TEIRESIAS (http://cbcsrv.watson.ibm.com/) are used to directly identify frequent patterns from unaligned biological sequences without an attempt to align them. Here we propose a new algorithm with more efficiency and more functionality than both PRATT2 and TEIRESIAS, and discuss some of its applications to G protein-coupled receptors, a protein family of important drug targets. In this study, we designed and implemented six algorithms to mine three different pattern types from either one or two datasets using a pattern growth approach. We compared our approach to PRATT2 and TEIRESIAS in efficiency, completeness and the diversity of pattern types. Compared to PRATT2, our approach is faster, capable of processing large datasets and able to identify the so-called type III patterns. Our approach is comparable to TEIRESIAS in the discovery of the so-called type I patterns but has additional functionality such as mining the so-called type II and type III patterns and finding discriminating patterns between two datasets. The source code for pattern growth algorithms and their pseudo-code are available at http://www.liacs.nl/home/kosters/pg/.

Does Foreign Direct Investment Affect Green Growth? Evidence from China’s Experience

Directory of Open Access Journals (Sweden)

Shujing Yue

2016-02-01

Full Text Available Foreign Direct Investment (FDI not only affects the economic growth but also affects the environmental protection of the host country. With China’s background of pursuing green growth, we need to consider the performance of FDI from the economic and environmental benefit aspects. On this basis, using slacks-based measure directional distance function (SBMDDF to build up green growth efficiency, economic efficiency and environmental efficiency indexes, empirical research on FDI in 104 Chinese cities from 2004 to 2011 has shown that: (1 Different cities have differences in their green growth efficiency. Shenzhen city is always efficient in green economic growth. (2 Overall, FDI is positive on Chinese cities’ green growth. (3 When the green growth efficiency is broken down into economic efficiency and environmental efficiency, FDI promotes China’s economic green growth through both environmental benefits and economic benefits. (4 The effect of FDI differs in different sectors. FDI in the emission-intensive sector promotes green efficiency mainly through the improvement of economic efficiency. FDI in the non-emission-intensive sector promotes economic efficiency, environmental efficiency and green efficiency.

Hexagonal boron nitride neutron detectors with high detection efficiencies

Science.gov (United States)

Maity, A.; Grenadier, S. J.; Li, J.; Lin, J. Y.; Jiang, H. X.

2018-01-01

Neutron detectors fabricated from 10B enriched hexagonal boron nitride (h-10BN or h-BN) epilayers have demonstrated the highest thermal neutron detection efficiency among solid-state neutron detectors to date at about 53%. In this work, photoconductive-like vertical detectors with a detection area of 1 × 1 mm2 were fabricated from 50 μm thick free-standing h-BN epilayers using Ni/Au and Ti/Al bilayers as ohmic contacts. Leakage currents, mobility-lifetime (μτ) products under UV photoexcitation, and neutron detection efficiencies have been measured for a total of 16 different device configurations. The results have unambiguously identified that detectors incorporating the Ni/Au bilayer on both surfaces as ohmic contacts and using the negatively biased top surface for neutron irradiation are the most desired device configurations. It was noted that high growth temperatures of h-10BN epilayers on sapphire substrates tend to yield a higher concentration of oxygen impurities near the bottom surface, leading to a better device performance by the chosen top surface for irradiation than by the bottom. Preferential scattering of oxygen donors tends to reduce the mobility of holes more than that of electrons, making the biasing scheme with the ability of rapidly extracting holes at the irradiated surface while leaving the electrons to travel a large average distance inside the detector at a preferred choice. When measured against a calibrated 6LiF filled micro-structured semiconductor neutron detector, it was shown that the optimized configuration has pushed the detection efficiency of h-BN neutron detectors to 58%. These detailed studies also provided a better understanding of growth-mediated impurities in h-BN epilayers and their effects on the charge collection and neutron detection efficiencies.

Urinary transforming growth factors in neoplasia: separation of 125I-labeled transforming growth factor-alpha from epidermal growth factor in human urine

International Nuclear Information System (INIS)

Stromberg, K.; Hudgins, W.R.

1986-01-01

Purified human epidermal growth factor (hEGF) from urine promotes anchorage-independent cell growth in soft agar medium. This growth is enhanced by transforming growth factor-beta (TGF-beta), and is specifically inhibited by hEGF antiserum. Transforming growth factors of the alpha type (TGF-alpha), potentially present in normal human urine or urine from tumor-bearing patients, also promote anchorage-independent cell growth and compete with EGF for membrane receptor binding. Consequently, TGF-alpha cannot be distinguished from urinary hEGF by these two functional assays. Therefore, a technique for separation of TGF-alpha and related peptides from urinary EGF based on biochemical characteristics would be useful. Radioiodination of characterized growth factors [mouse EGF (mEGF), hEGF, and rat TGF-alpha (rTGF-alpha)], which were then separately added to human urine, was used to evaluate a resolution scheme that separates TGF-alpha from the high level of background hEGF present in human urine. Methyl bonded microparticulate silica efficiently adsorbed the 125 I-labeled mEGF, 125 I-labeled hEGF, and 125 I-labeled rTGF-alpha that were added to 24-h human urine samples. Fractional elution with acetonitrile (MeCN) of the adsorbed silica released approximately 70 to 80% of the 125 I-labeled mEGF and 125 I-labeled hEGF between 25 and 30% MeCN, and over 80% of the 125 I-labeled rTGF-alpha between 15 and 25% MeCN, with retention after dialysis of less than 0.2 and 1.7% of the original urinary protein, respectively. A single-step enrichment of about 400-fold for mEGF and hEGF, and 50-fold for rTGF-alpha were achieved rapidly. 125 I-labeled mEGF and 125 I-labeled hEGF eluted later than would be predicted on the basis of their reported molecular weight of approximately 6000, whereas 125 I-labeled rTGF-alpha eluted from Bio-Gel P-10 at an approximate molecular weight of 8000 to 9000

A rapid and efficient preparation of [{sup 123}I]radiopharmaceuticals using a small HPLC Rocket[reg] column

Energy Technology Data Exchange (ETDEWEB)

Katsifis, Andrew [Radiopharmaceuticals Division R and D, Australian Nuclear Science and Technology, Organisation, Menai, NSW 2234, Sydney (Australia)]. E-mail: akx@ansto.gov.au; Papazian, Vahan [Radiopharmaceuticals Division R and D, Australian Nuclear Science and Technology, Organisation, Menai, NSW 2234, Sydney (Australia); Jackson, Timothy [Radiopharmaceuticals Division R and D, Australian Nuclear Science and Technology, Organisation, Menai, NSW 2234, Sydney (Australia); Loc' h, Christian [Radiopharmaceuticals Division R and D, Australian Nuclear Science and Technology, Organisation, Menai, NSW 2234, Sydney (Australia)

2006-01-01

A simplified method for the rapid and efficient preparation of [{sup 123}I]radiopharmaceuticals is described. Three radiopharmaceuticals, [{sup 123}I]{beta}-CIT, [{sup 123}I]MIBG and [{sup 123}I]clioquinol, were synthesised and purified as model compounds. The radiotracers were labelled with iodine-123 using electrophilic oxidative conditions and purified by a compact semi-preparative reverse phase column (C-18, 3 {mu}m, 7x53 mm, Alltima Rocket[reg, Alltech] using aqueous-ethanol as HPLC solvents that were directly used for radiopharmaceutical formulation. The radiochemical purity of the radioiodinated tracers as assessed by analytical HPLC was higher than 99% with specific activity higher than 3 GBq/nmol. The total preparation time of a radiotracer ranged from 40 to 60 min and, starting from 3.7 GBq of iodine-123, more than 2.5 GBq of formulated radiopharmaceuticals were available for clinical investigations.

Long-term CO2 rise has increased photosynthetic efficiency and water use efficiency but did not stimulate diameter growth of tropical trees

Science.gov (United States)

Groenendijk, P.; Zuidema, P.; Sleen, P. V. D.; Vlam, M.; Ehlers, I.; Schleucher, J.

2014-12-01

Tropical forests are a crucial component of the global carbon cycle, and their responses to atmospheric changes may shift carbon cycling and climate systems. Dynamic Global Vegetation Models (DGVMs) are the major tools to simulate tropical forest responses to climate change. One of the main determinants of these simulated responses is the effect of CO2 on tropical tree physiology and growth, the 'CO2 fertilization effect'. The paucity of CO2 enrichment experiments in the tropics importantly limits insights into the CO2 fertilization effect as well as the validation of DGVMs. However, use can be made of the 40% rise in atmospheric CO2 concentration since the onset of the Industrial Revolution. The effects of the historical CO2 rise on tree physiology and growth can be obtained from stable isotopes, isotopomers and tree diameter increments obtained in tree-ring studies. We studied the physiological and growth responses of 12 tree species in Bolivia, Cameroon and Thailand to 150 years of CO2 enrichment. Analyses of 13C of wood cellulose revealed strong, long-term increases in leaf intercellular CO2 concentrations for all study species and a marked improvement of intrinsic water use efficiency (iWUE). For a subset of one species per site, we studied the Deuterium isotopomers (isomers with isotopic atoms) of glucose in wood to obtain a direct estimate of the photorespiration-to-photosynthesis ratio. We found that this ratio consistently and strongly decreased over the past century, thus increasing the effeciency and rate of photosynthesis. In spite of these strong physiological responses to increased CO2levels, we did not find evidence for increased tree diameter growth for any of the sites, or for sites combined. Possible reasons for the lack of a growth stimulation include increased (leaf) temperature, insufficient availability of nutrients or a shift in biomass investment in trees. Our results suggest that the strong CO2 fertilization of tropical tree growth often

Efficiency of plant growth-promoting rhizobacteria (PGPR) for the ...

African Journals Online (AJOL)

Plant growth-promoting rhizobacteria (PGPR) are beneficial bacteria that colonize plant roots and enhance plant growth by a wide variety of mechanisms. The use of PGPR is steadily increasing in agriculture and offers an attractive way to replace chemical fertilizers, pesticides, and supplements. Here, we have isolated and ...

The influence of supplemented Curcuma in feed formulation to improve growth rate and feed efficiency of catfish (Clarias sp.)

Science.gov (United States)

Ulum, M. M.; Zubaidah, M.; Arief, M.; Prayogo

2018-04-01

Catfish (Clarias sp.) is very potential to be developed as a food fish. The use of the feed additive in feed intended to improve the health, productivity and compliance with animal nutrition. Feed additive is to use ginger are derived from nature.The purpose of this study was to determine the potential increase in feed formulation. The Curcuma effect on growth rate and feed efficiency of catfish (Clarias sp.). The method used experimental methods and design complete random with 4 treatments and 5 replications. The parameters examined in this study aregrowth rate and efficiency feed.The research showed that the ANOVA markedly dissimilar ( Padditive on formulations feed.

Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia

International Nuclear Information System (INIS)

Mahlia, T.M.I.; Masjuki, H.H.; Saidur, R.; Amalina, M.A.

2004-01-01

The ownership of household electrical appliances especially refrigerator-freezer has increased rapidly in Malaysia. Almost every household in this country has a refrigerator-freezer. To reduce energy consumption in this sector the refrigerator is one of the top priorities of the energy efficiency program for household appliances. Malaysian authority is considering implementing minimum energy efficiency standards for refrigerator-freezer sometime in the coming year. This paper attempts to analyze cost-benefit of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia. The calculations were made based on growth of ownership data for refrigerators in Malaysian households. The number of refrigerator-freezer has increased from 175,842 units in 1970 to 4,196,486 in 2000 and it will be about 11,293,043 in the year of 2020. Meanwhile it has accounted for about 26.3% of electricity consumption in a single household. Therefore, efficiency improvement of this appliance will give a significant impact in the future of electricity consumption in this country. Furthermore, it has been found that implementing an energy efficiency standard for household refrigerator-freezers is economically justified

Communication and The Challenges of Rapid Population Growth in ...

African Journals Online (AJOL)

2005) which projected the African Population at 1,349 million by 2025 and 1,969 million by 2050. These figures are so frightening that the use of communication to contribute to checking the high population growth is challenged. We discuss ...

The better growth phenotype of DvGS1-transgenic arabidopsis thaliana is attributed to the improved efficiency of nitrogen assimilation

Directory of Open Access Journals (Sweden)

Zhu Chenguang

2015-01-01

Full Text Available The overexpression of the algal glutamine synthetase (GS gene DvGS1 in Arabidopsis thaliana resulted in higher plant biomass and better growth phenotype. The purpose of this study was to recognize the biological mechanism for the growth improvement of DvGS1-transgenic Arabidopsis. A series of molecular and biochemical investigations related to nitrogen and carbon metabolism in the DvGS1-transgenic line was conducted. Analysis of nitrogen use efficiency (NUE-related gene transcription and enzymatic activity revealed that the transcriptional level and enzymatic activity of the genes encoding GS, glutamate synthase, glutamate dehydrogenase, alanine aminotransferase and aspartate aminotransferase, were significantly upregulated, especially from leaf tissues of the DvGS1-transgenic line under two nitrate conditions. The DvGS1-transgenic line showed increased total nitrogen content and decreased carbon: nitrogen ratio compared to wild-type plants. Significant reduced concentrations of free nitrate, ammonium, sucrose, glucose and starch, together with higher concentrations of total amino acids, individual amino acids (glutamate, aspartate, asparagine, methionine, soluble proteins and fructose in leaf tissues confirmed that the DvGS1-transgenic line demonstrated a higher efficiency of nitrogen assimilation, which subsequently affected carbon metabolism. These improved metabolisms of nitrogen and carbon conferred the DvGS1-transgenic Arabidopsis higher NUE, more biomass and better growth phenotype compared with the wild-type plants.

Energy efficiency and capital-energy substitutability: Evidence from four OPEC countries

International Nuclear Information System (INIS)

Adetutu, Morakinyo O.

2014-01-01

Highlights: • The analysis examines energy efficiency gains in selected OPEC countries during 1972–2010. • Capital-energy substitutability is also explored to analyze the impact of policy measures to reduce energy use. • The magnitudes of energy efficiency gains are somewhat small or modest. • Energy and capital are substitutes in some countries, but complements in others. • Climate change policies need to internalize the environmental cost of energy consumption in end-use prices. - Abstract: Rapid economic growth and development in several oil-exporting developing countries have led to increasing energy consumption and the accompanying greenhouse gas (GHG) emissions. Consequently, a good understanding of the nature and structure of energy use in developing economies is required for future energy and climate change policies. To this end, a modified translog cost function is employed in this paper to estimate energy efficiency for selected members of the Organization of the Petroleum Exporting Countries (OPEC) over the period 1972–2010. This also allows for the estimation of energy-capital substitutability, which arguably reflects the likely ease/disruption to long-term growth arising from policy measures aimed at reducing energy consumption and GHG emissions. The estimated results show that energy efficiency gains range from −14% to 13% for sampled countries. Furthermore, factor substitution elasticities suggest that energy and capital are substitutes in Algeria and Saudi Arabia, but are found to be complements in Iran and Venezuela. The insight generated by this study is that, over the last four decades, energy efficiency improvements in selected OPEC countries are modest, possibly reflecting a “subsidy effect” arising from artificially low energy prices. Thus, policy makers should take note that measures aimed at conserving energy need to internalize the environmental cost arising from energy consumption using pricing and fiscal instruments

Robust inducible Cre recombinase activity in the human malaria parasite Plasmodium falciparum enables efficient gene deletion within a single asexual erythrocytic growth cycle.

Science.gov (United States)

Collins, Christine R; Das, Sujaan; Wong, Eleanor H; Andenmatten, Nicole; Stallmach, Robert; Hackett, Fiona; Herman, Jean-Paul; Müller, Sylke; Meissner, Markus; Blackman, Michael J

2013-05-01

Asexual blood stages of the malaria parasite, which cause all the pathology associated with malaria, can readily be genetically modified by homologous recombination, enabling the functional study of parasite genes that are not essential in this part of the life cycle. However, no widely applicable method for conditional mutagenesis of essential asexual blood-stage malarial genes is available, hindering their functional analysis. We report the application of the DiCre conditional recombinase system to Plasmodium falciparum, the causative agent of the most dangerous form of malaria. We show that DiCre can be used to obtain rapid, highly regulated site-specific recombination in P. falciparum, capable of excising loxP-flanked sequences from a genomic locus with close to 100% efficiency within the time-span of a single erythrocytic growth cycle. DiCre-mediated deletion of the SERA5 3' UTR failed to reduce expression of the gene due to the existence of alternative cryptic polyadenylation sites within the modified locus. However, we successfully used the system to recycle the most widely used drug resistance marker for P. falciparum, human dihydrofolate reductase, in the process producing constitutively DiCre-expressing P. falciparum clones that have broad utility for the functional analysis of essential asexual blood-stage parasite genes. © 2013 John Wiley & Sons Ltd.

Developmental time windows for axon growth influence neuronal network topology.

Science.gov (United States)

Lim, Sol; Kaiser, Marcus

2015-04-01

Early brain connectivity development consists of multiple stages: birth of neurons, their migration and the subsequent growth of axons and dendrites. Each stage occurs within a certain period of time depending on types of neurons and cortical layers. Forming synapses between neurons either by growing axons starting at similar times for all neurons (much-overlapped time windows) or at different time points (less-overlapped) may affect the topological and spatial properties of neuronal networks. Here, we explore the extreme cases of axon formation during early development, either starting at the same time for all neurons (parallel, i.e., maximally overlapped time windows) or occurring for each neuron separately one neuron after another (serial, i.e., no overlaps in time windows). For both cases, the number of potential and established synapses remained comparable. Topological and spatial properties, however, differed: Neurons that started axon growth early on in serial growth achieved higher out-degrees, higher local efficiency and longer axon lengths while neurons demonstrated more homogeneous connectivity patterns for parallel growth. Second, connection probability decreased more rapidly with distance between neurons for parallel growth than for serial growth. Third, bidirectional connections were more numerous for parallel growth. Finally, we tested our predictions with C. elegans data. Together, this indicates that time windows for axon growth influence the topological and spatial properties of neuronal networks opening up the possibility to a posteriori estimate developmental mechanisms based on network properties of a developed network.

Effects of probiotic supplement ( and on feed efficiency, growth performance, and microbial population of weaning rabbits

Directory of Open Access Journals (Sweden)

Thanh Lam Phuoc

2017-02-01

Full Text Available Objective This study aimed to investigate the effects of single or/and double strains of probiotic supplement on feed efficiency, growth performance, and microbial population in distal gastrointestinal tract (GIT of weaning rabbits. Methods Sixty-four weaning (28 days old New Zealand White rabbits were randomly distributed into four groups with treatments including: basal diet without probiotic supplement (control or supplemented as follows: 1×106 cfu/g B. subtilis (BS group, 1×107 cfu/g L. acidophilus (LA group, or 0.5×106 cfu/g B. subtilis plus 0.5×107 cfu/g L. acidophilus (BL group. During the research, the male and female rabbits were fed separately. Body weight of the rabbits was recorded at 28, 42, and 70 d of age. Results There was an increase (p<0.05 in body weight gain for the LA group at 42 d. Rabbits fed BL responsed with a greater growth (p<0.05 and better feed conversion ratio (p<0.05 than those fed with no probiotic. Digestibility coefficients of dry matter, organic matter, crude protein, neutral detergent fiber, and gross energy were higher (p<0.05 in LA and BL groups than those in the control group. Male rabbits had higher (p<0.05 Bacilli spp. and Coliformis spp. in the ileum than female rabbits. Rabbits supplemented with BS had greater (p<0.05 numbers of bacilli in all intestinal segments than those receiving no probiotic, whereas intestinal Lactobacilli populations were greater (p<0.001 in the LA and BL diets compared to control. Average intestinal coliform populations were lowest (p<0.05 in the rabbits supplemented with LA as compared to those fed the control and BS. Conclusion Supplementation of L. acidophilus alone or in combination with B. subtilis at a half of dose could enhance number of gut beneficial bacteria populations, nutrient digestibility, cecal fermentation, feed efficiency, and growth performance, but rabbits receiving only B. subtilis alone were not different from the controls without probiotic.

A rapidly enlarging cutaneous hemangioma in pregnancy.

LENUS (Irish Health Repository)

Ma'ayeh, Marwan

2014-06-18

This is a case of a rapidly enlarging cutaneous pedunculated tumor on a patient\\'s thumb during her pregnancy. This was excised and identified as a hemangioma. A literature search identified a possible hormonal factor in causing an accelerated growth of this tumor.

Effects of prey type on specific dynamic action, growth, and mass conversion efficiencies in the horned frog, Ceratophrys cranwelli.

Science.gov (United States)

Grayson, Kristine L; Cook, Leslie W; Todd, M Jason; Pierce, D; Hopkins, William A; Gatten, Robert E; Dorcas, Michael E

2005-07-01

To be most energetically profitable, predators should ingest prey with the maximal nutritional benefit while minimizing the cost of processing. Therefore, when determining the quality of prey items, both the cost of processing and nutritional content must be considered. Specific dynamic action (SDA), the increase in metabolic rate associated with feeding in animals, is a significant processing cost that represents the total cost of digestion and assimilation of nutrients from prey. We examined the effects of an invertebrate diet (earthworms) and a vertebrate diet (newborn mice) on mass conversion efficiencies, growth, and SDA in the Chacoan horned frog, Ceratophrys cranwelli. We found the earthworm diet to be significantly lower in lipid, protein, and energy content when compared to the diet of newborn mice. Growth and mass conversion efficiencies were significantly higher in frogs fed newborn mice. However, mean SDA did not differ between frogs fed the two diets, a finding that contradicts many studies that indicate SDA increases with the protein content of the meal. Together, our results indicate that future studies evaluating the effect of meal type on bioenergetics of herpetofauna are warranted and may provide significant insight into the underlying factors driving SDA.

Catch-up Growth Followed by Stagnation: Mexico, 1950-2010

OpenAIRE

Timothy J. Kehoe; Felipe Meza

2011-01-01

In 1950 Mexico entered an economic takeoff and grew rapidly for more than 30 years. Growth stopped during the crises of 1982-1995, despite major reforms, including liberalization of foreign trade and investment. Since then growth has been modest. We analyze the economic history of Mexico 1877-2010. We conclude that the growth 1950-1981 was driven by urbanization, industrialization, and education and that Mexico would have grown even more rapidly if trade and investment had been liberalized so...

Application of an efficient strategy based on liquid-liquid extraction, high-speed counter-current chromatography, and preparative HPLC for the rapid enrichment, separation, and purification of four anthraquinones from Rheum tanguticum.

Science.gov (United States)

Chen, Tao; Liu, Yongling; Zou, Denglang; Chen, Chen; You, Jinmao; Zhou, Guoying; Sun, Jing; Li, Yulin

2014-01-01

This study presents an efficient strategy based on liquid-liquid extraction, high-speed counter-current chromatography, and preparative HPLC for the rapid enrichment, separation, and purification of four anthraquinones from Rheum tanguticum. A new solvent system composed of petroleum ether/ethyl acetate/water (4:2:1, v/v/v) was developed for the liquid-liquid extraction of the crude extract from R. tanguticum. As a result, emodin, aloe-emodin, physcion, and chrysophanol were greatly enriched in the organic layer. In addition, an efficient method was successfully established to separate and purify the above anthraquinones by high-speed counter-current chromatography and preparative HPLC. This study supplies a new alternative method for the rapid enrichment, separation, and purification of emodin, aloe-emodin, physcione, and chrysophanol. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

1 H-NMR metabolomics: Profiling method for a rapid and efficient ...

African Journals Online (AJOL)

Principal component analysis was used to separate groups of samples and to relate known and unknown metabolites to transgenic events. The screening of 100 samples, from extraction to data mining, took 36 h. Thus, this procedure allows the rapid selection of metabolic phenotypes of interest among about 30 transgenic ...

Evaluation of Power Generation Efficiency of Cascade Hydropower Plants: A Case Study

Directory of Open Access Journals (Sweden)

Jiahua Wei

2013-02-01

Full Text Available Effective utilization of scarce water resources has presented a significant challenge to respond to the needs created by rapid economic growth in China. In this study, the efficiency of the joint operation of the Three Gorges and Gezhouba cascade hydropower plants in terms of power generation was evaluated on the basis of a precise simulation-optimization technique. The joint operation conditions of the Three Gorges and Gezhouba hydropower plants between 2004 and 2010 were utilized in this research in order to investigate the major factors that could affect power output of the cascade complex. The results showed that the current power output of the Three Gorges and Gezhouba cascade complex had already reached around 90% of the maximum theoretical value. Compared to other influencing factors evaluated in this study, the accuracy of hydrological forecasts and flood control levels can have significant impact on the power generating efficiency, whereas the navigation has a minor influence. This research provides a solid quantitative-based methodology to assess the operation efficiency of cascade hydropower plants, and more importantly, proposes potential methods that could improve the operation efficiency of cascade hydropower plants.

Proposed Training Plan to Improve Building Energy Efficiency in Vietnam

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha; Evans, Meredydd

2013-01-01

Vietnam has experienced fast growth in energy consumption in the past decade, with annual growth rate of over 12 percent. This is accompanied by the fast increase in commercial energy use, driven by rapid industrialization, expansion of motorized transport, and increasing energy use in residential and commercial buildings. Meanwhile, Vietnam is experiencing rapid urbanization at a rate of 3.4 percent per year; and the majority of the growth centered in and near major cities such as Hanoi and Ho Chi Minh City. This has resulted in a construction boom in Vietnam.

Radiation utilization efficiency, nitrogen uptake and modeling crop growth and yield of rainfed rice under different nitrogen rates

International Nuclear Information System (INIS)

Gouranga, Kar; Ashwani Kumar; Mohapatra, Sucharita

2014-01-01

Optimum utilization of photosynthetically active radiation (PAR) along with proper nitrogen (N) management for sustainable rice production is still a promising management recommendation for sustainable rainfed rice cultivation in eastern India. The objective of this investigation was to study radiation utilization efficiency (RUE), N uptake and modeling growth and productivity of wet/rainy season rice (cv. Lalat and Gayatri) under 0, 50, 90, 120 and 150 kg ha -1 N application. Results showed that N rates significantly affected plant biomass, leaf area index (LAI), biological yield (straw and grain yield) and N uptake for both the varieties. The intercepted photosynthetically active radiation (IPAR) and spectral reflectance based vegetation indices (IR/R, NDVI) were also different between two varieties and among N rates. Higher rate of N increased the RUE significantly; averaged over years and varieties, mean values of RUE were 1.35, 1.70, 2.01, 2.15 and 2.17 g MJ -1 under 0, 50, 90, 120 and 150 kg N ha -1 , respectively. Though crop growth, yield, N uptake and RUE were higher at 150 kg N ha -1 but the results were at par with 120 kg N ha -1 . Agronomic N use efficiency (ANUE) was also low at 150 kg N ha -1 . The DSSAT v 4.5 model was applied to simulate crop growth, yield and phenology of the crop under different N rates. Model performance was found to be poor at low N rates (0, 50 kg N ha -1 ), but the model performed fairly well at higher N rates (90 kg ha -1 and above). (author)

Energy Efficiency Services Sector: Workforce Education and Training Needs

Energy Technology Data Exchange (ETDEWEB)

Goldman, Charles A.; Peters, Jane S.; Albers, Nathaniel; Stuart, Elizabeth; Fuller, Merrian C.

2010-03-19

This report provides a baseline assessment of the current state of energy efficiency-related education and training programs and analyzes training and education needs to support expected growth in the energy efficiency services workforce. In the last year, there has been a significant increase in funding for 'green job' training and workforce development (including energy efficiency), through the American Recovery and Reinvestment Act (ARRA). Key segments of the energy efficiency services sector (EESS) have experienced significant growth during the past several years, and this growth is projected to continue and accelerate over the next decade. In a companion study (Goldman et al. 2009), our research team estimated that the EESS will increase two- to four-fold by 2020, to 220,000 person-years of employment (PYE) (low-growth scenario) or up to 380,000 PYE (high-growth scenario), which may represent as many as 1.3 million individuals. In assessing energy efficiency workforce education and training needs, we focus on energy-efficiency services-related jobs that are required to improve the efficiency of residential and nonresidential buildings. Figure ES-1 shows the market value chain for the EESS, sub-sectors included in this study, as well as the types of market players and specific occupations. Our assessment does not include the manufacturing, wholesale, and retail distribution subsectors, or energy efficiency-focused operations and maintenance performed by facility managers.

HEALTH CARE SPENDING GROWTH AND THE FUTURE OF U.S. TAX RATES

Science.gov (United States)

Baicker, Katherine; Skinner, Jonathan S.

2011-01-01

The fraction of GDP devoted to health care in the United States is the highest in the world and rising rapidly. Recent economic studies have highlighted the growing value of health improvements, but less attention has been paid to the efficiency costs of tax-financed spending to pay for such improvements. This paper uses a life cycle model of labor supply, saving, and longevity improvement to measure the balanced-budget impact of continued growth in the Medicare and Medicaid programs. The model predicts that top marginal tax rates could rise to 70 percent by 2060, depending on the progressivity of future tax changes. The deadweight loss of the tax system is greater when the financing is more progressive. If the share of taxes paid by high-income taxpayers remains the same, the efficiency cost of raising the revenue needed to finance the additional health spending is $1.48 per dollar of revenue collected, and GDP declines (relative to trend) by 11 percent. A proportional payroll tax has a lower efficiency cost (41 cents per dollar of revenue averaged over all tax hikes, a 5 percent drop in GDP) but more than doubles the share of the tax burden borne by lower income taxpayers. Empirical support for the model comes from analysis of OECD country data showing that countries facing higher tax burdens in 1979 experienced slower health care spending growth in subsequent decades. The rising burden imposed by the public financing of health care expenditures may therefore serve as a brake on health care spending growth. PMID:21608156

Rapid structural and compositional change in an old-growth subtropical forest: using plant traits to identify probable drivers.

Science.gov (United States)

Malizia, Agustina; Easdale, Tomás A; Grau, H Ricardo

2013-01-01

Recent studies have shown directional changes in old-growth tropical forests, but changes are complex and diverse, and their drivers unclear. Here, we report rapid net structural and compositional changes in an old-growth subtropical forest and we assess the functional nature of these changes to test hypothetical drivers including recovery from past disturbances, reduction in ungulate browsing, CO2 fertilization, and increases in rainfall and temperature. The study relies on 15 years of demographic monitoring within 8 ha of subtropical montane forest in Argentina. Between 1992 and 2007, stem density markedly increased by 50% (12 stems ha(-1) y(-1)) and basal area by 6% (0.13 m(2) ha(-1) y(-1)). Increased stem density resulted from enhanced recruitment of understory treelets (Piper tucumanum, Eugenia uniflora, Allophylus edulis) into small size classes. Among 27 common tree species, net population growth was negatively correlated with maximum tree size and longevity, and positively correlated with leaf size and leaf nutrient content, especially so when initial population size was controlled for. Changes were inconsistent with predictions derived from past disturbances (no increase in shade-tolerant or long-lived late-succesional species), rainfall or temperature increase (no increase in evergreen or deciduous species, respectively). However, the increase in nutrient-rich soft-leaved species was consistent with exclusion of large herbivores two decades before monitoring started; and CO2 fertilization could help explain the disproportionate increase in small stems. Reductions in populations of large vertebrates have been observed in many otherwise undisturbed tropical forests, and our results suggest they can have important structural and functional repercussions in these forests.

Rapid and efficient proteolysis through laser-assisted immobilized enzyme reactors.

Science.gov (United States)

Zhang, Peng; Gao, Mingxia; Zhu, Shaochun; Lei, Jie; Zhang, Xiangmin

2011-11-25

In this report, laser radiation (808nm) for the first time was employed to enhance the efficiency of proteolysis through immobilized enzyme reactor (IMER). IMER based monolithic support was prepared in the fused-silica capillary via a simple two-step procedure including acryloylation on trypsin surface and in situ aqueous polymerization/immobilization. The feasibility and high efficiency of the laser-assisted IMER were demonstrated by the digestion of bovine serum albumin (BSA), cytochrome c (Cyt-c) and β-casein. The digestion process was achieved in 60s. The peptides were identified by MALDI-TOF-MS, yielding the sequence coverage of 33% for BSA, 73% for Cyt-c and 22% for β-casein. The comparisons between the in-solution digestion and on IMER reaction with/without laser assistance were made. To further confirm its efficiency in proteome analysis, the laser-assisted IMER was also applied to the analysis of one fraction of human serum sample through two-dimensional (2-D) separation of strong anion exchange/reversed-phase liquid chromatography (SAX/RPLC). After a database search, 49 unique peptides corresponding to 5 proteins were identified. The results showed that the laser-assisted IMER provides a promising platform for the high-throughput protein identification. Copyright © 2011 Elsevier B.V. All rights reserved.

Single-cell analysis of S. cerevisiae growth recovery after a sublethal heat-stress applied during an alcoholic fermentation.

Science.gov (United States)

Tibayrenc, Pierre; Preziosi-Belloy, Laurence; Ghommidh, Charles

2011-06-01

Interest in bioethanol production has experienced a resurgence in the last few years. Poor temperature control in industrial fermentation tanks exposes the yeast cells used for this production to intermittent heat stress which impairs fermentation efficiency. Therefore, there is a need for yeast strains with improved tolerance, able to recover from such temperature variations. Accordingly, this paper reports the development of methods for the characterization of Saccharomyces cerevisiae growth recovery after a sublethal heat stress. Single-cell measurements were carried out in order to detect cell-to-cell variability. Alcoholic batch fermentations were performed on a defined medium in a 2 l instrumented bioreactor. A rapid temperature shift from 33 to 43 °C was applied when ethanol concentration reached 50 g l⁻¹. Samples were collected at different times after the temperature shift. Single cell growth capability, lag-time and initial growth rate were determined by monitoring the growth of a statistically significant number of cells after agar medium plating. The rapid temperature shift resulted in an immediate arrest of growth and triggered a progressive loss of cultivability from 100 to 0.0001% within 8 h. Heat-injured cells were able to recover their growth capability on agar medium after a lag phase. Lag-time was longer and more widely distributed as the time of heat exposure increased. Thus, lag-time distribution gives an insight into strain sensitivity to heat-stress, and could be helpful for the selection of yeast strains of technological interest.

Growth of the skull in young children in Baotou, China.

Science.gov (United States)

Hou, Hai-dong; Liu, Ming; Gong, Ke-rui; Shao, Guo; Zhang, Chun-Yang

2014-09-01

There are some controversies about the optimal time to perform skull repair in very young Chinese children because of the rapid skull growth in this stage of life. The purpose of this current study is to describe the characteristics of skull growth and to discuss the optimal time for skull repair in young Chinese children with skull defects. A total of 112 children born in the First Affiliated Hospital of Baotou Medical College were measured for six consecutive years starting in 2006. Cranial length (CL, linear distance between the eyebrows to the pillow tuberosity), cranial width (CW, double-sided linear distance of connection of external auditory canal), ear over the top line (EOTL), the eyebrows-the posterior tuberosity line (EPTL), and head circumference (HC) were measured to describe the skull growth. The most rapid period of skull growth occurs during the first year of life. The second and third most rapid periods are the second and third years, respectively. Then, the skull growth slowed and the values of the skull growth index of 6-year-old children were close to those of adults. Children 0-1 years old should not receive skull repair due to their rapid skull growth. The indexes of children 3 years old or older were close to those of the adult; therefore, 3 years old or older may receive skull repair.

Development of a rapid and efficient microinjection technique for gene insertion into fertilized salmonid eggs

Energy Technology Data Exchange (ETDEWEB)

Chandler, D.P.; Welt, M.; Leung, F.C.

1990-10-01

An efficient one-step injection technique for gene insertion into fertilized rainbow trout (Oncorhynchus mykiss) eggs is described, and basic parameters affecting egg survival are reported. Freshly fertilized rainbow trout eggs were injected in the perivitelline space with a recombinant mouse metallothionein-genomic bovine growth hormone (bGH) DNA construct using a 30-gauge hypodermic needle and a standard microinjection system. Relative to control, site of injection and DNA concentration did not affect the egg survival, but injections later than 3--4 hours post fertilization were detrimental. The injection technique permitted treatment of 100 eggs/hr with survivals up to 100%, resulting in a 4% DNA uptake rate as indicated by DNA dot blot analysis. Positive dot blot results also indicated that the injected DNA is able to cross the vitelline membrane and persist for 50--60 days post hatching, obviating the need for direct injection into the germinal disk. Results are consistent with previous transgenic fish work, underscoring the usefulness of the technique for generating transgenic trout and salmonids. 24 refs., 6 figs., 3 tabs.

Avoiding 100 New Power Plants by Increasing Efficiency of Room Air Conditioners in India: Opportunities and Challenges

Energy Technology Data Exchange (ETDEWEB)

Phadke, Amol; Abhyankar, Nikit; Shah, Nihar

2014-06-19

Electricity demand for room ACs is growing very rapidly in emerging economies such as India. We estimate the electricity demand from room ACs in 2030 in India considering factors such as weather and income growth using market data on penetration of ACs in different income classes and climatic regions. We discuss the status of the current standards, labels, and incentive programs to improve the efficiency of room ACs in these markets and assess the potential for further large improvements in efficiency and find that efficiency can be improved by over 40percent cost effectively. The total potential energy savings from Room AC efficiency improvement in India using the best available technology will reach over 118 TWh in 2030; potential peak demand saving is found to be 60 GW by 2030. This is equivalent to avoiding 120 new coal fired power plants of 500 MW each. We discuss policy options to complement, expand and improve the ongoing programs to capture this large potential.

Avoiding 100 new power plants by increasing efficiency of room air conditioners in India: opportunities and challenges

Energy Technology Data Exchange (ETDEWEB)

Phadke, Amol; Abhyankar, Nikit; Shah, Nihar; [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technology Division

2013-10-15

Electricity demand for room ACs is growing very rapidly in emerging economies such as India. We estimate the electricity demand from room ACs in 2030 in India considering factors such as weather and income growth using market data on penetration of ACs in different income classes and climatic regions. We discuss the status of the current standards, labels, and incentive programs to improve the efficiency of room ACs in these markets and assess the potential for further large improvements in efficiency and find that efficiency can be improved by over 40% cost effectively. The total potential energy savings from Room AC efficiency improvement in India using the best available technology will reach over 118 TWh in 2030; potential peak demand saving is found to be 60 GW by 2030. This is equivalent to avoiding 120 new coal fired power plants of 500 MW each. We discuss policy options to complement, expand and improve the ongoing programs to capture this large potential.

THE EFFECT OF TRAINING IN THE IMPROVEMENT OF EMPLOYEE EFFICIENCY IN PHARMACEUTICAL INDUSTRY AND AN APPLICATION

Directory of Open Access Journals (Sweden)

Sinem AYDOĞDU

2013-01-01

Full Text Available Businesses faces with important and rapid changes. This rapid change in the business environment forces the organizations to change their operations and structures. Adopting these changes fast and contionus renewal of both employees and organizations help organizations reach the set goals and survive in the competitive market. To be accomplished in competition, companies need well trained and well developed employees from front employees to the top level managers in the executive suite. Moreover, training process must gain continuity. Especially, in Pharmaceutical Industry, due to the fast and rapid changes and improvements concerning the regulations and procedures of Ministery of Health, guidelines such as GMP (Good Manufacturing Practises, GLP (Good Laboratory Practises, GDP (Good Documentation Practises etc. employees who are working should be trained and updated about the current knowledge to increase the efficiency in the organization. Vice versa, organizations can not raise their competition power in order to exist and develop themselves. To sum up, globalization, fast changes in regulations and procedures and also technological shifts lead to changes even in organizations. In order to cope with these changes, companies need to train their employees. The main purpose of this study is to investigate the effect of training on employee efficiency. Research is carried out with 74 employees from a pharmaceutical company in İstanbul, Turkey. The results of the study support the hypotheses. There’s a significant difference between white collar and blue collar employees on the idea of efficiency of training in the area of career development, area of productivity, professional growth and customer satisfaction.

Rapid isolation of gene homologs across taxa: Efficient identification and isolation of gene orthologs from non-model organism genomes, a technical report

Directory of Open Access Journals (Sweden)

Heffer Alison

2011-03-01

Full Text Available Abstract Background Tremendous progress has been made in the field of evo-devo through comparisons of related genes from diverse taxa. While the vast number of species in nature precludes a complete analysis of the molecular evolution of even one single gene family, this would not be necessary to understand fundamental mechanisms underlying gene evolution if experiments could be designed to systematically sample representative points along the path of established phylogenies to trace changes in regulatory and coding gene sequence. This isolation of homologous genes from phylogenetically diverse, representative species can be challenging, especially if the gene is under weak selective pressure and evolving rapidly. Results Here we present an approach - Rapid Isolation of Gene Homologs across Taxa (RIGHT - to efficiently isolate specific members of gene families. RIGHT is based upon modification and a combination of degenerate polymerase chain reaction (PCR and gene-specific amplified fragment length polymorphism (AFLP. It allows targeted isolation of specific gene family members from any organism, only requiring genomic DNA. We describe this approach and how we used it to isolate members of several different gene families from diverse arthropods spanning millions of years of evolution. Conclusions RIGHT facilitates systematic isolation of one gene from large gene families. It allows for efficient gene isolation without whole genome sequencing, RNA extraction, or culturing of non-model organisms. RIGHT will be a generally useful method for isolation of orthologs from both distant and closely related species, increasing sample size and facilitating the tracking of molecular evolution of gene families and regulatory networks across the tree of life.

Structure of the gene encoding VGF, a nervous system-specific mRNA that is rapidly and selectively induced by nerve growth factor in PC12 cells.

Science.gov (United States)

Salton, S R; Fischberg, D J; Dong, K W

1991-05-01

Nerve growth factor (NGF) plays a critical role in the development and survival of neurons in the peripheral nervous system. Following treatment with NGF but not epidermal growth factor, rat pheochromocytoma (PC12) cells undergo neural differentiation. We have cloned a nervous system-specific mRNA, NGF33.1, that is rapidly and relatively selectively induced by treatment of PC12 cells with NGF and basic fibroblast growth factor in comparison with epidermal growth factor. Analysis of the nucleic acid and predicted amino acid sequences of the NGF33.1 cDNA clone suggested that this clone corresponded to the NGF-inducible mRNA called VGF (A. Levi, J. D. Eldridge, and B. M. Paterson, Science 229:393-395, 1985; R. Possenti, J. D. Eldridge, B. M. Paterson, A. Grasso, and A. Levi, EMBO J. 8:2217-2223, 1989). We have used the NGF33.1 cDNA clone to isolate and characterize the VGF gene, and in this paper we report the complete sequence of the VGF gene, including 853 bases of 5' flank revealed TATAA and CCAAT elements, several GC boxes, and a consensus cyclic AMP response element-binding protein binding site. The VGF promoter contains sequences homologous to other NGF-inducible, neuronal promoters. We further show that VGF mRNA is induced in PC12 cells to a greater extent by depolarization and by phorbol-12-myristate-13-acetate treatment than by 8-bromo-cyclic AMP treatment. By Northern (RNA) and RNase protection analysis, VGF mRNA is detectable in embryonic and postnatal central and peripheral nervous tissues but not in a number of nonneural tissues. In the cascade of events which ultimately leads to the neural differentiation of NGF-treated PC12 cells, the VGF gene encodes the most rapidly and selectively regulated, nervous-system specific mRNA yet identified.

Employment and Growth | Page 36 | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

As an engine of economic growth, private enterprise plays an important role in combatting ... In helping developing countries pursue private sector development ... India's rapid economic growth has reduced extreme poverty in the country.

A study of energy efficiency of transport sector in China from 2003 to 2009

International Nuclear Information System (INIS)

Chung, William; Zhou, Guanghui; Yeung, Iris M.H.

2013-01-01

Highlights: • The activity effect accounts for 98.05% increase in energy use. • Only Eastern’s structural effect contributes energy savings. • Intensity effect contributes energy saving in −4.24% of total energy changes. • Energy-mix effect is insignificant. - Abstract: As one of the three high-energy consumption sectors (industry, building, and transportation) in China, the transport sector faced a devastating resource and environment challenge. The transport sector was reportedly responsible for about 15.9% of the country’s total final energy consumption in 2008. This paper investigates the energy consumption and efficiency of China’s transport sector from 2003 to 2009. The transport energy data of 30 China administrative regions were divided into “three-belts” (Eastern, Western, and Central areas), and the corresponding turnovers were reported and analyzed using an index decomposition analysis (Logarithmic Mean Divisia Index). The energy data and turnover of the transport sector indicated that the high growth rate of turnover results is attributed to the high growth rate of diesel, assuming that diesel is the major fuel for freight transport. The growth of diesel is the main contributor to the overall growth of energy consumption. The growth rate of gasoline has become minimal since 2006. Since 2005, all three-belt areas, with regard to the effectiveness of energy conservation policies, have continuously improved their energy efficiencies based on the results of decomposition analysis. The energy intensity effect shows that the energy conservation and efficiency policies were more effective in the Central and Western areas than that in the Eastern area. On the other hand, the regional shift effect indicates that the policies favor to the Eastern area since only its regional shift effect contributes energy savings since 2008. The energy-mix effect is insignificant, which indicates that it is not necessary to conduct CO 2 emission decomposition

Efficient and privacy-preserving biometric identification in cloud

Directory of Open Access Journals (Sweden)

Changhee Hahn

2016-09-01

Full Text Available With the rapid growth in the development of smart devices equipped with biometric sensors, client identification system using biometric traits are widely adopted across various applications. Among many biometric traits, fingerprint-based identification systems have been extensively studied and deployed. However, to adopt biometric identification systems in practical applications, two main obstacles in terms of efficiency and client privacy must be resolved simultaneously. That is, identification should be performed at an acceptable time, and only a client should have access to his/her biometric traits, which are not revocable if leaked. Until now, multiple studies have demonstrated successful protection of client biometric data; however, such systems lack efficiency that leads to excessive time utilization for identification. The most recently researched scheme shows efficiency improvements but reveals client biometric traits to other entities such as biometric database server. This violates client privacy. In this paper, we propose an efficient and privacy-preserving fingerprint identification scheme by using cloud systems. The proposed scheme extensively exploits the computation power of a cloud so that most of the laborious computations are performed by the cloud service provider. According to our experimental results on an Amazon EC2 cloud, the proposed scheme is faster than the existing schemes and guarantees client privacy by exploiting symmetric homomorphic encryption. Our security analysis shows that during identification, the client fingerprint data is not disclosed to the cloud service provider or fingerprint database server.

Effects of feeding level and feeding frequency on growth, feed efficiency and nitrogen and phosphorus loss in seabass (Lates calcarifer Bloch) fed diets with defatted soybean meal partially replacing fishmeal

OpenAIRE

Srisook, S.; Mahankich, S.; Tantikitti, C.; Onkong, S.

2007-01-01

Satun Coastal Fisheries Research and Development Center, Muang, Satun 3Feeding management is crucial for feed efficiency, nutrient utilization, growth of cultured aquatic species and the amount of organic waste produced. This study aimed at investigating effects of two levels offeeding at two feeding frequencies on growth performance, feed efficiency and nitrogen and phosphorus loss in Asian seabass when fed diets with defatted soybean meal (SBM) replacing fish meal. Three diets were formulat...

A rapid, reliable method of evaluating growth and viability of intraerythrocytic protozoan hemoparasites using fluorescence flow cytometry.

Science.gov (United States)

Davis, W C; Wyatt, C R; Hamilton, M J; Goff, W L

1992-01-01

Fluorescence flow cytometry was employed to assess the potential of a vital dye, hydroethidine, for use in the detection and monitoring of the viability of hemoparasites in infected erythrocytes, using Babesia bovis as a model parasite. The studies demonstrated that hydroethidine is taken up by B. bovis and metabolically converted to the DNA binding fluorochrome, ethidium. Following uptake of the dye, erythrocytes containing viable parasites were readily distinguished and quantitated. Timed studies with the parasiticidal drug, Ganaseg, showed that it is possible to use the fluorochrome assay to monitor the effects of the drug on the rate of replication and viability of B. bovis in culture. The assay provides a rapid method for evaluation of the in vitro effect of drugs on hemoparasites and for analysis of the effect of various components of the immune response, such as lymphokines, monocyte products, antibodies, and effector cells (T, NK, LAK, ADCC) on the growth and viability of intraerythrocytic parasites.

A rapid, reliable method of evaluating growth and viability of intraerythrocytic protozoan hemoparasites using fluorescence flow cytometry

Directory of Open Access Journals (Sweden)

W. C. Davis

1992-01-01

Full Text Available Fluorescence flow cytometry was employed to assess the potential of a vital dye, hydroethiedine, for use in the detection and monitoring of the viability of hemoparasites in infected erythrocytes, using Babesia bovis as a model parasite. The studies demonstrated that hydroethidine is taken up by B. bovis and metabolically converted to the DNA binding fluorochrone, ethidium. Following uptake of the dye, erythrocytes contamine viable parasites were readily distinguished and quantitated. Timed studies with the parasiticidal drug, Ganaseg, showed that it is possible to use the fluorochrome assay to monitor the effects of the drug on the rate of replication and viability of B. bovis in culture. The assay provides a rapid method for evaluation of the in vitro effect of drugs on hemoparasites and for analysis of the effect of various components of the immune response, such as lymphokines, monocyte products, antibodies, and effector cells (T, NK, LAK, ADCC on the growth and viability of intraerythrocytic parasites.

Vulnerability to cavitation, hydraulic efficiency, growth and survival in an insular pine (Pinus canariensis).

Science.gov (United States)

López, Rosana; López de Heredia, Unai; Collada, Carmen; Cano, Francisco Javier; Emerson, Brent C; Cochard, Hervé; Gil, Luis

2013-06-01

It is widely accepted that hydraulic failure due to xylem embolism is a key factor contributing to drought-induced mortality in trees. In the present study, an attempt is made to disentangle phenotypic plasticity from genetic variation in hydraulic traits across the entire distribution area of a tree species to detect adaptation to local environments. A series of traits related to hydraulics (vulnerability to cavitation and hydraulic conductivity in branches), growth performance and leaf mass per area were assessed in eight Pinus canariensis populations growing in two common gardens under contrasting environments. In addition, the neutral genetic variability (FST) and the genetic differentiation of phenotypic variation (QST) were compared in order to identify the evolutionary forces acting on these traits. The variability for hydraulic traits was largely due to phenotypic plasticity. Nevertheless, the vulnerability to cavitation displayed a significant genetic variability (approx. 5 % of the explained variation), and a significant genetic × environment interaction (between 5 and 19 % of the explained variation). The strong correlation between vulnerability to cavitation and survival in the xeric common garden (r = -0·81; P < 0·05) suggests a role for the former in the adaptation to xeric environments. Populations from drier sites and higher temperature seasonality were less vulnerable to cavitation than those growing at mesic sites. No trade-off between xylem safety and efficiency was detected. QST of parameters of the vulnerability curve (0·365 for P50 and the slope of the vulnerability curve and 0·452 for P88) differed substantially from FST (0·091), indicating divergent selection. In contrast, genetic drift alone was found to be sufficient to explain patterns of differentiation for xylem efficiency and growth. The ability of P. canariensis to inhabit a wide range of ecosystems seemed to be associated with high phenotypic plasticity and some degree of local

Towards energy efficient mobile communications

CSIR Research Space (South Africa)

Masonta, MT

2010-10-01

Full Text Available The rapid growth and development of wireless communication services and applications corresponds to an increase in associated energy consumption. For broadband wireless network deployment in rural areas affected by unreliability and unavailability...

Rapid determination of total phenols in seawater by 4-aminoantipyrine colorimetry

Digital Repository Service at National Institute of Oceanography (India)

Kadam, A.N.; Bhangale, V.P.

A rapid and efficient 4-aminoantipyrine (4-AAP) colorimetric method without any cleanup step to determine total phenols in seawater is described. Efficiency of the method for seawater using external addition of phenol concentrations with working...

Structure of a Multilayer Nanofilm To Increase the Encapsulation Efficiency of Basic Fibroblast Growth Factor.

Science.gov (United States)

Han, Uiyoung; Hong, Jinkee

2018-03-05

In this study, we established the structure of a multilayer nanofilm that more efficiently encapsulates basic fibroblast growth factor (bFGF). First, a positively charged layer material was selected from biocompatible polymers such as collagen (Col), poly(beta-amino ester) (Poly2), and chitosan (Chi), while considering the film thickness. We then investigated the change in bFGF encapsulation efficiency when the multilayer structure was changed from a tetralayer to a trilayer. As a result, we obtained a highly improved bFGF encapsulation efficiency in the nanofilm using a positively charged layer formed by a blend of Col and Poly2 and a negatively charged poly(acrylic acid) (PAA) layer within a trilayered structure. In particular, we found that a significant amount of adsorbed bFGF was desorbed again during the film fabrication process of a tetralayered nanofilm. In the conventional nanofilm, bFGF was regarded as a polycation and formed a multilayer nanofilm that was composed of a tetralayered structure and was represented as (polycation/polyanion/bFGF/polyanion) n where n = number of repeated tetralayers. Here, we suggested that bFGF should not be considered a polycation, rather it should be considered as a small quantity of molecule that exists between the polyanion and polycation layers. In this case, the nanofilm is composed of repeating units of (polycation/polyanion/bFGF/polycation/polyanion), because the amount of adsorbed bFGF is considerably lower than that of other building blocks.

Cow dung extract: a medium for the growth of pseudomonads enhancing their efficiency as biofertilizer and biocontrol agent in rice.

Science.gov (United States)

Srivastava, Rashmi; Aragno, Michel; Sharma, A K

2010-09-01

Some pseudomands are being utilized as biofertilizers and biopesticides because of their role in plant growth promotion and plant protection against root parasites, respectively. Two strains of Pseudomonas, P. jessenii LHRE62 and P. synxantha HHRE81, recovered from wheat rhizosphere, have shown their potential in field bioinoculation tests under rice-wheat and pulse-wheat rotation systems. Normally, pseudomonads are cultivated on synthetic media-like King's B and used for inoculation on seeds/soil drench with talcum or charcoal as carrier material. Cow dung is being used for different purposes from the ancient time and has a significant role in crop growth because of the content in humic compounds and fertilizing bioelements available in it. Here, cow dung extract was tested as a growth medium for strains LHRE62 and HHRE81, in comparison with growth in King's B medium. The log phase was delayed by 2 h as compared to growth in King's B medium. The bacterial growth yield, lower in plain cow dung extract as compared to King's B medium, was improved upon addition of different carbon substrates. Growth of rice var. Pant Dhan 4 in pot cultures was increased using liquid formulation of cow dung extract and bacteria as foliar spray, compared to their respective controls. Biocontrol efficacy of the bioagents was assessed by challenging rice crop with Rhizoctonia solani, a sheath blight pathogen. The growth promotion and biocontrol efficiencies were more pronounced in the case of mixed inocula of strains LHRE62 and HHRE81.

Catch-up Growth Followed by Stagnation: Mexico 1950–2008

OpenAIRE

Timothy Kehoe; Felipe Meza

2011-01-01

In 1950 Mexico entered an economic takeoff and grew rapidly for more than 30 years. Growth stopped during the crises of 1982-1995, despite major reforms, including liberalization of foreign trade and investment. Since then growth has been modest. We analyze the economic history of Mexico 1877-2010. We conclude that the growth 1950-1981 was driven by urbanization, industrialization, and education and that Mexico would have grown even more rapidly if trade and investment had been liberalized so...

Unemployment and endogenous growth

NARCIS (Netherlands)

van Schaik, A.B.T.M.; de Groot, H.L.F.

1995-01-01

In this paper we develop a two-sector endogenous growth model with a dual labour market, based on efficiency wages. Growth is driven by intentional R&D performed in the high-tech and high-wage sector. It is examined how a change in rivalry among firms affects simultaneously growth and unemployment.

The Tolerability and Efficacy of Rapid Infliximab Infusions in Patients with Inflammatory Bowel Disease.

Science.gov (United States)

Qazi, Taha; Shah, Bhavesh; El-Dib, Mohammed; Farraye, Francis A

2016-02-01

Few studies have assessed the loss of efficacy or patient and caregiver satisfaction with rapid infliximab infusions. The aim of this study is to assess the tolerability, loss of efficacy and to describe the impact on resource utilization and patient satisfaction in rapid infliximab infusions. Subjects with inflammatory bowel disease receiving rapid infliximab infusions were included in the study. Subjects received maintenance infusions from June 2011 to June 2013. Incidence of adverse reactions and the total number of rapid infliximab infusions were recorded. Efficacy was compared to published studies evaluating the long-term efficacy of infliximab infusions. Patient satisfaction was addressed through a survey following the implementation of the rapid infusion protocol. Seventy-five subjects with IBD were included in the study. Five hundred and twenty-two rapid infliximab infusions were provided to patients. There were no acute or delayed infusion reactions. Ten subjects (13 %) required either a dose escalation or interval adjustment between infliximab infusions. A majority of patients reported increased satisfaction with 1-h infliximab infusions, and 97 % of surveyed patients opted to continue rapid infusions. The rapid infliximab infusion protocol increased infusion unit efficiency by increasing capacity by 15 %. Cost savings in the elimination of nursing time translated to approximately $108,150 savings at our institution. Rapid infliximab infusions do not appear to increase the risk of loss of response compared to historical studies of long-term infliximab efficiency. A rapid infliximab infusion protocol improved efficiency in our infusion unit and increased patient and nursing satisfaction.

Biomass accumulation and radiation use efficiency of honey mesquite and eastern red cedar

International Nuclear Information System (INIS)

Kiniry, J.R.

1998-01-01

Rangeland models that simulate hydrology, soil erosion and nutrient balance can be used to select management systems which maximize profits for producers while they minimize adverse impacts on water quality. Values are needed for parameters that describe the growth of invading woody species in order to allow simulation of their competition with grasses. Three attributes useful for describing and quantifying plant growth are: the potential leaf area index (LAI) or ratio of leaf area divided by ground area; the light extinction coefficient (k) that is used to calculate the fraction of light intercepted by leaves, applying Beer’s law; and the radiation-use efficiency (RUE) or amount of dry biomass produced per unit of intercepted light. Objectives in this study were to measure LAI, k, and RUE for eastern red cedar (Juniperus virginiana L.) and honey mesquite (Prosopis glandulosa Torr. var. glandulosa), without competing plants, as a first step toward simulating their growth. Seedlings were planted in the field at Temple, Texas, USA in early 1992 and kept free of competition from herbaceous plants. During 1993, 1994 and 1995 data were collected on biomass, leaf area and intercepted photosynthetically active radiation (PAR) for individual trees. Both tree species showed exponential biomass increases. At the end of the 1995 growing season, mean LAI values were 1.16 for cedar and 1.25 for mesquite. Mean k values were 0.34 for mesquite and 0.37 for cedar. Radiation use efficiency for aboveground biomass was 1.60±0.17 (mean±standard deviation) g per MJ of intercepted PAR for cedar and 1.61±0.26 for mesquite. The rapid growth in 1995 was accompanied by greater leaf area and thus greater summed intercepted PAR. These values are critical for quantifying growth of these two species. (author)

Rapid population growth and environmental degradation: ultimate versus proximate factors.

Science.gov (United States)

Shaw, R P

1989-01-01

This philosophical review of 2 arguments about responsibility for and solutions to environmental degradation concludes that both sides are correct: the ultimate and the proximal causes. Ultimate causes of pollution are defined as the technology responsible for a given type of pollution, such as burning fossil fuel; proximate causes are defined as situation-specific factors confounding the problem, such as population density or rate of growth. Commoner and others argue that developed countries with low or negative population growth rates are responsible for 80% of world pollution, primarily in polluting technologies such as automobiles, power generation, plastics, pesticides, toxic wastes, garbage, warfaring, and nuclear weapons wastes. Distortionary policies also contribute; examples are agricultural trade protection, land mismanagement, urban bias in expenditures, and institutional rigidity., Poor nations are responsible for very little pollution because poverty allows little waste or expenditures for polluting, synthetic technologies. The proximal causes of pollution include numbers and rate of growth of populations responsible for the pollution. Since change in the ultimate cause of pollution remains out of reach, altering the numbers of polluters can make a difference. Predictions are made for proportions of the world's total waste production, assuming current 1.6 tons/capita for developed countries and 0.17 tons/capita for developing countries. If developing countries grow at current rates and become more wealthy, they will be emitting half the world's waste by 2025. ON the other hand, unsustainable population growth goes along with inadequate investment in human capital: education, health, employment, infrastructure. The solution is to improve farming technologies in the 117 non-self-sufficient countries, fund development in the most unsustainable enclaves of growing countries, break institutionalized socio-political rigidity in these enclaves, and focus on

Growth regulators and darkness increase efficiency in in vitro culture of immature embryos from peppers

Directory of Open Access Journals (Sweden)

Juan Pablo Manzur

2014-12-01

Full Text Available Common pepper (Capsicum annuum L. is one of the most important vegetables in the world, and extensive breeding efforts are being made to develop new improved strains of this species. In this regard, in vitro culture of immature embryos may help breeders accelerate breeding cycles and overcome interspecific barriers, among other applications. In this study, we have optimized a protocol for in vitro culture of immature embryos of C. annuum. Levels of indole-3-acetic acid (IAA and zeatin have been tested to improve the efficiency (germination rates of this technique in C. annuum embryos at the four main immature stages (i.e. globular, heart, torpedo, and early cotyledonary from four varietal types of this species (California Wonder, Piquillo, Guindilla, and Bola. The effect of 5-day initial incubation in the dark was also tested on the most efficient hormone formulation. On average, relatively low levels of both IAA and zeatin (0.01 mg L−¹ each (M1 provided the highest germination rates, particularly in the advanced stages (torpedo and cotyledonary. To a lesser extent, the lack of these growth regulators (M0 or high IAA (0.2 mg L−¹/low zeatin (0.01 mg L−¹ (M2 combination also had a positive response. On the contrary, high zeatin levels (0.2 mg L−¹ produced very low germination rates or callus development (efficiency 0-7 %. Different responses were also found between genotypes. Thus, considering the best media (M0, M1, M2, Bola embryos had the highest rates. M1 plus 5-days of initial dark incubation (M1-D improved the efficiency rates at all embryo stages, particularly in the earliest (globular embryos which increased from 3 % to > 20 %.

Collagen-embedded hydroxylapatite-beta-tricalcium phosphate-silicon dioxide bone substitute granules assist rapid vascularization and promote cell growth

Energy Technology Data Exchange (ETDEWEB)

Ghanaati, Shahram M; Thimm, Benjamin W; Unger, Ronald E; Orth, Carina; Barbeck, Mike; Kirkpatrick, C James [Institute of Pathology, Johannes Gutenberg-University Mainz, Langenbeckstr.1, 55101 Mainz (Germany); Kohler, Thomas; Mueller, Ralph, E-mail: ghanaati@uni-mainz.d [Institute for Biomechanics, ETH Zuerich, Wolfgang-Pauli-Str.10, 8093 Zuerich (Switzerland)

2010-04-15

In the present study we assessed the biocompatibility in vitro and in vivo of a low-temperature sol-gel-manufactured SiO{sub 2}-based bone graft substitute. Human primary osteoblasts and the osteoblastic cell line, MG63, cultured on the SiO{sub 2} biomatrix in monoculture retained their osteoblastic morphology and cellular functionality in vitro. The effect of the biomaterial in vivo and its vascularization potential was tested subcutaneously in Wistar rats and demonstrated both rapid vascularization and good integration within the peri-implant tissue. Scaffold degradation was progressive during the first month after implantation, with tartrate-resistant acid phosphatase-positive macrophages being present and promoting scaffold degradation from an early stage. This manuscript describes successful osteoblastic growth promotion in vitro and a promising biomaterial integration and vasculogenesis in vivo for a possible therapeutic application of this biomatrix in future clinical studies.

Optimization of Growth Medium for Efficient Cultivation of Lactobacillus salivarius i 24 using Response Surface Method

Directory of Open Access Journals (Sweden)

Lim, C. H.

2007-01-01

Full Text Available Production of Lactobacillus salivarius i 24, a probiotic strain for chicken, was studied in batch fermentation using 500 mL Erlenmeyer flask. Response surface method (RSM was used to optimize the medium for efficient cultivation of the bacterium. The factors investigated were yeast extract, glucose and initial culture pH. A polynomial regression model with cubic and quartic terms was used for the analysis of the experimental data. Estimated optimal conditions of the factors for growth of L. salivarius i 24 were; 3.32 % (w/v glucose, 4.31 % (w/v yeast extract and initial culture pH of 6.10.

The impact and efficiency of public administration excellence on fostering SMEs in EU countries

Directory of Open Access Journals (Sweden)

Aleksander Aristovnik

2015-05-01

Full Text Available The article investigates the impact and efficiency of bureaucracy on the development of small and medium-sized enterprises (SMEs in the European Union (EU. For this purpose, the article applies a non-parametric approach, i.e. data envelopment analysis (DEA, to assess the best performers in terms of transforming existing bureaucratic burdens into selected SME indicators, such as growth in their numbers, employment or value added in the 2010-2014 period. The empirical results show that Luxembourg, Sweden and, in particular, the Baltic States can serve as a good benchmark for transforming a relatively favourable environment of public administration excellence into SME indicator growth. On the other hand, Denmark and the UK, despite their top ease-of-doing-business rankings could not significantly spur SME growth in the considered period. Nevertheless, the main goal for the large majority of EU member states, especially in South-east Europe and the Mediterranean region, remains a further reduction of bureaucracy that could be useful for improving the regulatory environment of SMEs and thus aid in an even more rapid recovery from the crisis.

Cortical bone growth and maturational changes in dwarf rats induced by recombinant human growth hormone

Science.gov (United States)

Martinez, D. A.; Orth, M. W.; Carr, K. E.; Vanderby, R. Jr; Vailas, A. C.

1996-01-01

The growth hormone (GH)-deficient dwarf rat was used to investigate recombinant human (rh) GH-induced bone formation and to determine whether rhGH facilitates simultaneous increases in bone formation and bone maturation during rapid growth. Twenty dwarf rats, 37 days of age, were randomly assigned to dwarf plus rhGH (GH; n = 10) and dwarf plus vehicle (n = 10) groups. The GH group received 1.25 mg rhGH/kg body wt two times daily for 14 days. Biochemical, morphological, and X-ray diffraction measurements were performed on the femur middiaphysis. rhGH stimulated new bone growth in the GH group, as demonstrated by significant increases (P bone length (6%), middiaphyseal cross-sectional area (20%), and the amount of newly accreted bone collagen (28%) in the total pool of middiaphyseal bone collagen. Cortical bone density, mean hydroxyapatite crystal size, and the calcium and collagen contents (microgram/mm3) were significantly smaller in the GH group (P bone collagen maturation, and mean hydroxyapatite crystal size may be independently regulated during rapid growth.

The Chinese-born immigrant infant feeding and growth hypothesis

Directory of Open Access Journals (Sweden)

Kristy A. Bolton

2016-10-01

Full Text Available Abstract Background Rapid growth in the first six months of life is a well-established risk factor for childhood obesity, and child feeding practices (supplementation or substitution of breast milk with formula and early introduction of solids have been reported to predict this. The third largest immigrant group in Australia originate from China. Case-studies reported from Victorian Maternal and Child Health nurses suggest that rapid growth trajectories in the infants of Chinese parents is common place. Furthermore, these nurses report that high value is placed by this client group on rapid growth and a fatter child; that rates of breastfeeding are low and overfeeding of infant formula is high. There are currently no studies which describe infant growth or its correlates among this immigrant group. Presentation of hypothesis We postulate that in Australia, Chinese-born immigrant mothers will have different infant feeding practices compared to non-immigrant mothers and this will result in different growth trajectories and risk of overweight. We present the Chinese-born immigrant infant feeding and growth hypothesis - that less breastfeeding, high formula feeding and early introduction of solids in infants of Chinese-born immigrant mothers living in Australia will result in a high protein intake and subsequent rapid growth trajectory and increased risk of overweight and obesity. Testing the hypothesis Three related studies will be conducted to investigate the hypothesis. These will include two quantitative studies (one cross-sectional, one longitudinal and a qualitative study. The quantitative studies will investigate differences in feeding practices in Chinese-born immigrant compared to non-immigrant mothers and infants; and the growth trajectories over the first 3.5 years of life. The qualitative study will provide more in-depth understanding of the influencing factors on feeding practices in Chinese-born immigrant mothers. Implications of the

Measuring efficiency and productivity growth of new technology-based firms in business incubators: the Portuguese case study of Madan Parque.

Science.gov (United States)

Grilo, A; Santos, J

2015-01-01

Business incubators can play a major role in helping to turn a business idea into a technology-based organization that is economically efficient. However, there is a shortage in the literature regarding the efficiency evaluation and productivity evolution of the new technology-based firms (NTBFs) in the incubation scope. This study develops a model based on the data envelopment analysis (DEA) methodology, which allows the incubated NTBFs to evaluate and improve the efficiency of their management. Moreover, the Malmquist index is used to examine productivity change. The index is decomposed into multiple components to give insights into the root sources of productivity change. The proposed model was applied in a case study with 13 NTBFs incubated. From that study, we conclude that inefficient firms invest excessively in research and development (R&D), and, on average, firms have a productivity growth in the period of study.

Measuring Efficiency and Productivity Growth of New Technology-Based Firms in Business Incubators: The Portuguese Case Study of Madan Parque

Science.gov (United States)

Grilo, A.; Santos, J.

2015-01-01

Business incubators can play a major role in helping to turn a business idea into a technology-based organization that is economically efficient. However, there is a shortage in the literature regarding the efficiency evaluation and productivity evolution of the new technology-based firms (NTBFs) in the incubation scope. This study develops a model based on the data envelopment analysis (DEA) methodology, which allows the incubated NTBFs to evaluate and improve the efficiency of their management. Moreover, the Malmquist index is used to examine productivity change. The index is decomposed into multiple components to give insights into the root sources of productivity change. The proposed model was applied in a case study with 13 NTBFs incubated. From that study, we conclude that inefficient firms invest excessively in research and development (R&D), and, on average, firms have a productivity growth in the period of study. PMID:25874266

Measuring Efficiency and Productivity Growth of New Technology-Based Firms in Business Incubators: The Portuguese Case Study of Madan Parque

Directory of Open Access Journals (Sweden)

A. Grilo

2015-01-01

Full Text Available Business incubators can play a major role in helping to turn a business idea into a technology-based organization that is economically efficient. However, there is a shortage in the literature regarding the efficiency evaluation and productivity evolution of the new technology-based firms (NTBFs in the incubation scope. This study develops a model based on the data envelopment analysis (DEA methodology, which allows the incubated NTBFs to evaluate and improve the efficiency of their management. Moreover, the Malmquist index is used to examine productivity change. The index is decomposed into multiple components to give insights into the root sources of productivity change. The proposed model was applied in a case study with 13 NTBFs incubated. From that study, we conclude that inefficient firms invest excessively in research and development (R&D, and, on average, firms have a productivity growth in the period of study.

Polymorphisms and haplotypes in the bovine neuropeptide Y, growth hormone receptor, ghrelin, insulin-like growth factor 2, and uncoupling proteins 2 and 3 genes and their associations with measures of growth, performance, feed efficiency, and carcass merit in beef cattle.

Science.gov (United States)

Sherman, E L; Nkrumah, J D; Murdoch, B M; Li, C; Wang, Z; Fu, A; Moore, S S

2008-01-01

Genes that regulate metabolism and energy partitioning have the potential to influence economically important traits in farm animals, as do polymorphisms within these genes. In the current study, SNP in the bovine neuropeptide Y (NPY), growth hormone receptor (GHR), ghrelin (GHRL), uncoupling proteins 2 and 3 (UCP2 and UCP3), IGF2, corticotrophin-releasing hormone (CRH), cocaine and amphetamine regulated transcript (CART), melanocortin-4 receptor (MC4R), proopiomelanocortin (POMC), and GH genes were evaluated for associations with growth, feed efficiency, and carcass merit in beef steers. In total, 24 SNP were evaluated for associations with these traits and haplotypes were constructed within each gene when 2 or more SNP showed significant associations. An A/G SNP located in intron 4 of the GHR gene had the largest effects on BW of the animals (dominance effect P GHRL gene tended to show effects on residual feed intake, FCR, and partial efficiency of growth (P < 0.10). The IGF2 SNP most strongly affected LM area (P < 0.01), back fat, ADG, and FCR (P < 0.05). The SNP in the CART, MC4R, POMC, GH, and CRH genes did not show associations at P < 0.05 with any of the traits. Although most of the SNP that showed associations do not cause amino acid changes, these SNP could be linked to other yet to be detected causative mutations or nearby QTL. It will be very important to verify these results in other cattle populations.

Evaluating algal growth performance and water use efficiency of pilot-scale revolving algal biofilm (RAB) culture systems.

Science.gov (United States)

Gross, Martin; Mascarenhas, Vernon; Wen, Zhiyou

2015-10-01

A Revolving Algal Biofilm (RAB) growth system in which algal cells are attached to a flexible material rotating between liquid and gas phases has been developed. In this work, different configurations of RAB systems were developed at pilot-scale by retrofitting the attachment materials to a raceway pond (2000-L with 8.5 m(2) footprint area) and a trough reservoir (150 L with 3.5 m(2) footprint area). The algal growth performance and chemical composition, as well as the water evaporative loss and specific water consumption were evaluated over a period of nine months in a greenhouse environment near Boone, Iowa USA. Additionally a raceway pond was run in parallel, which served as a control. On average the raceway-based RAB and the trough-based RAB outperformed the control pond by 309% and 697%, respectively. A maximum productivity of 46.8 g m(-2) day(-1) was achieved on the trough-based RAB system. The evaporative water loss of the RAB system was modeled based on an energy balance analysis and was experimentally validated. While the RAB system, particularly the trough-based RAB, had higher water evaporative loss, the specific water consumption per unit of biomass produced was only 26% (raceway-based RAB) and 7% (trough-based RAB) of that of the control pond. Collectively, this research shows that the RAB system is an efficient algal culture system and has great potential to commercially produce microalgae with high productivity and efficient water use. © 2015 Wiley Periodicals, Inc.

Portable Diagnostics and Rapid Germination

Energy Technology Data Exchange (ETDEWEB)

Dunn, Zachary Spencer [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-12-01

In the Bioenergy and Defense Department of Sandia National Laboratories, characterization of the BaDx (Bacillus anthracis diagnostic cartridge) was performed and rapid germination chemistry was investigated. BaDx was tested with complex sample matrixes inoculated with Bacillus anthracis, and the trials proved that BaDx will detect Bacillus anthracis in a variety of the medium, such as dirt, serum, blood, milk, and horse fluids. The dimensions of the device were altered to accommodate an E. coli or Listeria lateral flow immunoassay, and using a laser printer, BaDx devices were manufactured to identify E. coli and Listeria. Initial testing with E. coli versions of BaDx indicate that the device will be viable as a portable diagnostic cartridge. The device would be more effective with faster bacteria germination; hence studies were performed the use of rapid germination chemistry. Trials with calcium dipicolinic acid displayed increased cell germination, as shown by control studies using a microplate reader. Upon lyophilization the rapid germination chemistry failed to change growth patterns, indicating that the calcium dipicolinic acid was not solubilized under the conditions tested. Although incompatible with the portable diagnostic device, the experiments proved that the rapid germination chemistry was effective in increasing cell germination.

Effect of earthworms on growth, photosynthetic efficiency and metal uptake in Brassica juncea L. plants grown in cadmium-polluted soils.

Science.gov (United States)

Kaur, Parminder; Bali, Shagun; Sharma, Anket; Vig, Adarsh Pal; Bhardwaj, Renu

2017-05-01

The present study has been carried out to examine the role of earthworms in phytoremediation of Cd and its effect on growth, pigment content, expression of genes coding key enzymes of pigments, photosynthetic efficiency and osmoprotectants in Brassica juncea L. plants grown under cadmium (Cd) metal stress. The effect of different Cd concentrations (0.50, 0.75, 1.0, 1.25 mM) was studied in 30 and 60-day-old plants grown in soils containing earthworms. It was observed that earthworm inoculation showed stimulatory effect on phytoremediation capacity and Cd uptake has increased by 49% (in 30-day-old plants) and 35% (in 60-day-old plants) in shoots and 13.3% (in 30-day-old plants) and 10% (in 60-day-old plants) in roots in 30 and 60-day-old plants in Cd (1.25 mM) treatments. Plant growth parameters such as root and shoot length, relative water content and tolerance index were found to increase in the presence of earthworms. Recovery in photosynthetic pigments (chlorophyll and carotenoid) and gas exchange parameters, i.e. net photosynthetic rate (P n ), stomatal conductance (G s ), intercellular CO 2 concentration (C i ) and transpiration rate (E t ), was observed after earthworm's supplementation. Modulation in expression of key enzymes for pigment synthesis, i.e. chlorophyllase, phytoene synthase, chalcone synthase and phenylalanine ammonia lyase, was also observed. The results of our study revealed that earthworms help to mitigate the toxic effects produced by Cd on plant growth and photosynthetic efficiency along with enhanced phytoremediation capacity when co-inoculated with Cd in soil.

Uncooled infrared sensors: rapid growth and future perspective

Science.gov (United States)

Balcerak, Raymond S.

2000-07-01

The uncooled infrared cameras are now available for both the military and commercial markets. The current camera technology incorporates the fruits of many years of development, focusing on the details of pixel design, novel material processing, and low noise read-out electronics. The rapid insertion of cameras into systems is testimony to the successful completion of this 'first phase' of development. In the military market, the first uncooled infrared cameras will be used for weapon sights, driver's viewers and helmet mounted cameras. Major commercial applications include night driving, security, police and fire fighting, and thermography, primarily for preventive maintenance and process control. The technology for the next generation of cameras is even more demanding, but within reach. The paper outlines the technology program planned for the next generation of cameras, and the approaches to further enhance performance, even to the radiation limit of thermal detectors.

Energy efficiency of digestible protein, fat and carbohydrate utilisation for growth in rainbow trout and Nile tilapia.

Science.gov (United States)

Schrama, Johan W; Haidar, Mahmoud N; Geurden, Inge; Heinsbroek, Leon T N; Kaushik, Sachi J

2018-04-01

Currently, energy evaluation of fish feeds is performed on a digestible energy basis. In contrast to net energy (NE) evaluation systems, digestible energy evaluation systems do not differentiate between the different types of digested nutrients regarding their potential for growth. The aim was to develop an NE evaluation for fish by estimating the energy efficiency of digestible nutrients (protein, fat and carbohydrates) and to assess whether these efficiencies differed between Nile tilapia and rainbow trout. Two data sets were constructed. The tilapia and rainbow data set contained, respectively, eight and nine experiments in which the digestibility of protein, fat and energy and the complete energy balances for twenty-three and forty-five diets was measured. The digestible protein (dCP), digestible fat (dFat) and digestible carbohydrate intakes (dCarb) were calculated. By multiple regression analysis, retained energy (RE) was related to dCP, dFat and dCarb. In tilapia, all digestible nutrients were linearly related to RE (Pefficiency of dCP, dFat and dCarb was 49, 91 and 66 %, respectively, showing large similarity with pigs. Tilapia and trout had similar energy efficiencies of dCP (49 v. 57 %) and dFat (91 v. 84 %), but differed regarding dCarb.

Colorimetry provides a rapid objective measurement of de novo hair growth rate in mice.

Science.gov (United States)

Tzung, Tien-Yi; Yang, Chia-Yi; Huang, Yung-Chang; Kao, Fu-Jen

2009-11-01

Depilated mice have been used as a test platform for hair growth-regulating agents. However, currently available assessment tools for hair growth in mice are less than ideal. Tristimulus colorimetry of the fur color of depilated agouti, albino, and black mice with L*, a*, and b* values were performed daily until the full growth of pelage. Using light-emitting diode (LED) irradiation (650 and 890 nm) with a daily dose of 3.5 J/cm(2) as hair growth regulators, the hair growth rates observed by the global assessment were compared with those derived from colorimetry. In contrast to a* and b* values, L* values changed more drastically over time in the anagen phase regardless of fur color. Unlike the inhibitory effect of 650 nm irradiation, LED of 890 nm promoted de novo hair regrowth in mice. The difference in hair growth rates detected by colorimetry paralleled the observation made by the global assessment. The L* value of fur color obtained by tristimulus colorimetry was a sensitive yet quantitative indicator of de novo hair growth, and could be used to project the hair growth rate in mice.

Fast growth may impair regeneration capacity in the branching coral Acropora muricata.

Science.gov (United States)

Denis, Vianney; Guillaume, Mireille M M; Goutx, Madeleine; de Palmas, Stéphane; Debreuil, Julien; Baker, Andrew C; Boonstra, Roxane K; Bruggemann, J Henrich

2013-01-01

Regeneration of artificially induced lesions was monitored in nubbins of the branching coral Acropora muricata at two reef-flat sites representing contrasting environments at Réunion Island (21°07'S, 55°32'E). Growth of these injured nubbins was examined in parallel, and compared to controls. Biochemical compositions of the holobiont and the zooxanthellae density were determined at the onset of the experiment, and the photosynthetic efficiency (Fv/Fm ) of zooxanthellae was monitored during the experiment. Acropora muricata rapidly regenerated small lesions, but regeneration rates significantly differed between sites. At the sheltered site characterized by high temperatures, temperature variations, and irradiance levels, regeneration took 192 days on average. At the exposed site, characterized by steadier temperatures and lower irradiation, nubbins demonstrated fast lesion repair (81 days), slower growth, lower zooxanthellae density, chlorophyll a concentration and lipid content than at the former site. A trade-off between growth and regeneration rates was evident here. High growth rates seem to impair regeneration capacity. We show that environmental conditions conducive to high zooxanthellae densities in corals are related to fast skeletal growth but also to reduced lesion regeneration rates. We hypothesize that a lowered regenerative capacity may be related to limited availability of energetic and cellular resources, consequences of coral holobionts operating at high levels of photosynthesis and associated growth.

Fast growth may impair regeneration capacity in the branching coral Acropora muricata.

Directory of Open Access Journals (Sweden)

Vianney Denis

Full Text Available Regeneration of artificially induced lesions was monitored in nubbins of the branching coral Acropora muricata at two reef-flat sites representing contrasting environments at Réunion Island (21°07'S, 55°32'E. Growth of these injured nubbins was examined in parallel, and compared to controls. Biochemical compositions of the holobiont and the zooxanthellae density were determined at the onset of the experiment, and the photosynthetic efficiency (Fv/Fm of zooxanthellae was monitored during the experiment. Acropora muricata rapidly regenerated small lesions, but regeneration rates significantly differed between sites. At the sheltered site characterized by high temperatures, temperature variations, and irradiance levels, regeneration took 192 days on average. At the exposed site, characterized by steadier temperatures and lower irradiation, nubbins demonstrated fast lesion repair (81 days, slower growth, lower zooxanthellae density, chlorophyll a concentration and lipid content than at the former site. A trade-off between growth and regeneration rates was evident here. High growth rates seem to impair regeneration capacity. We show that environmental conditions conducive to high zooxanthellae densities in corals are related to fast skeletal growth but also to reduced lesion regeneration rates. We hypothesize that a lowered regenerative capacity may be related to limited availability of energetic and cellular resources, consequences of coral holobionts operating at high levels of photosynthesis and associated growth.

Controllable mineral coatings on PCL scaffolds as carriers for growth factor release.

Science.gov (United States)

Suárez-González, Darilis; Barnhart, Kara; Migneco, Francesco; Flanagan, Colleen; Hollister, Scott J; Murphy, William L

2012-01-01

In this study, we have developed mineral coatings on polycaprolactone scaffolds to serve as templates for growth factor binding and release. Mineral coatings were formed using a biomimetic approach that consisted in the incubation of scaffolds in modified simulated body fluids (mSBF). To modulate the properties of the mineral coating, which we hypothesized would dictate growth factor release, we used carbonate (HCO(3)) concentration in mSBF of 4.2 mm, 25 mm, and 100 mm. Analysis of the mineral coatings formed using scanning electron microscopy indicated growth of a continuous layer of mineral with different morphologies. X-ray diffraction analysis showed peaks associated with hydroxyapatite, the major inorganic constituent of human bone tissue in coatings formed in all HCO(3) concentrations. Mineral coatings with increased HCO(3) substitution showed more rapid dissolution kinetics in an environment deficient in calcium and phosphate but showed re-precipitation in an environment with the aforementioned ions. The mineral coating provided an effective mechanism for growth factor binding and release. Peptide versions of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP2) were bound with efficiencies up to 90% to mineral mineral-coated PCL scaffolds. We also demonstrated sustained release of all growth factors with release kinetics that were strongly dependent in the solubility of the mineral coating. Copyright © 2011 Elsevier Ltd. All rights reserved.

In Vitro Seeds Germination and Seedling Growth of Bambara Groundnut (Vigna subterranea (L.) Verdc. (Fabaceae)).

Science.gov (United States)

Koné, Mongomaké; Koné, Tchoa; Silué, Nakpalo; Soumahoro, André Brahima; Kouakou, Tanoh Hilaire

2015-01-01

Bambara groundnut (Vigna subterranea (L.) Verdc.) is an indigenous grain legume. It occupies a prominent place in the strategies to ensure food security in sub-Saharan Africa. Development of an efficient in vitro regeneration system, a prerequisite for genetic transformation application, requires the establishment of optimal conditions for seeds germination and plantlets development. Three types of seeds were inoculated on different basal media devoid of growth regulators. Various strengths of the medium of choice and the type and concentration of carbon source were also investigated. Responses to germination varied with the type of seed. Embryonic axis (EA) followed by seeds without coat (SWtC) germinated rapidly and expressed a high rate of germination. The growth performances of plantlets varied with the basal medium composition and the seeds type. The optimal growth performances of plants were displayed on half strength MS basal medium with SWtC and EA as source of seeds. Addition of 3% sucrose in the culture medium was more suitable for a maximum growth of plantlets derived from EA.

Remote sensing based approach for monitoring urban growth in Mexico city, Mexico: A case study

Science.gov (United States)

Obade, Vincent

The world is experiencing a rapid rate of urban expansion, largely contributed by the population growth. Other factors supporting urban growth include the improved efficiency in the transportation sector and increasing dependence on cars as a means of transport. The problems attributed to the urban growth include: depletion of energy resources, water and air pollution; loss of landscapes and wildlife, loss of agricultural land, inadequate social security and lack of employment or underemployment. Aerial photography is one of the popular techniques for analyzing, planning and minimizing urbanization related problems. However, with the advances in space technology, satellite remote sensing is increasingly being utilized in the analysis and planning of the urban environment. This article outlines the strengths and limitations of potential remote sensing techniques for monitoring urban growth. The selected methods include: Principal component analysis, Maximum likelihood classification and "decision tree". The results indicate that the "classification tree" approach is the most promising for monitoring urban change, given the improved accuracy and smooth transition between the various land cover classes

Growth and Growth hormone - Insulin Like Growth Factor -I (GH-IGF-I) Axis in Chronic Anemias.

Science.gov (United States)

Soliman, Ashraf T; De Sanctis, Vincenzo; Yassin, Mohamed; Adel, Ashraf

2017-04-28

Anaemia is a global public health problem affecting both developing and developed countries with major consequences for human health as well as social and economic development. It occurs at all stages of the life cycle, but is more prevalent in pregnant women and young children. Iron deficiency anaemia (IDA) was considered to be among the most important contributing factors to the global burden of disease. Prolonged and/or chronic anemia has a negative effect on linear growth especially during the rapid phases (infancy and puberty). Additionally infants with chronic IDA have delayed cognitive, motor, and affective development that may be long-lasting. In view of the significant impact of chronic anemias on growth, pediatricians endocrinologists and hematologists should advocate primary prevention and screening for growth disturbance in these forms of anemias. The extent of the negative effect of different forms of chronic anemias on linear growth and its possible reversibilty is addressed in this review. The possible mechanisms that may impair growth in the different forms of anemias are addressed with special attention to their effect on the growth hormone (GH) - insulin like growth factor -I (IGF-I).

Electricity, growth and development in India

International Nuclear Information System (INIS)

Debeir, Jean-Claude

2014-01-01

In India, the revenue generated by rapid economic growth have been used neither to relieve the enormous social injustices affecting the oppressed, nor to develop the physical-and especially electric power-infrastructure in a determined and planned way. This growth has not reduced poverty, and it has caused huge ecological degradations

C4 plants use fluctuating light less efficiently than do C3 plants: a study of growth, photosynthesis and carbon isotope discrimination.

Science.gov (United States)

Kubásek, Jiří; Urban, Otmar; Šantrůček, Jiří

2013-12-01

Plants in the field are commonly exposed to fluctuating light intensity, caused by variable cloud cover, self-shading of leaves in the canopy and/or leaf movement due to turbulence. In contrast to C3 plant species, only little is known about the effects of dynamic light (DL) on photosynthesis and growth in C4 plants. Two C4 and two C3 monocot and eudicot species were grown under steady light or DL conditions with equal sum of daily incident photon flux. We measured leaf gas exchange, plant growth and dry matter carbon isotope discrimination to infer CO2 bundle sheath leakiness in C4 plants. The growth of all species was reduced by DL, despite only small changes in steady-state gas exchange characteristics, and this effect was more pronounced in C4 than C3 species due to lower assimilation at light transitions. This was partially attributed to increased bundle sheath leakiness in C4 plants under the simulated lightfleck conditions. We hypothesize that DL leads to imbalances in the coordination of C4 and C3 cycles and increasing leakiness, thereby decreasing the quantum efficiency of photosynthesis. In addition to their other constraints, the inability of C4 plants to efficiently utilize fluctuating light likely contributes to their absence in such environments as forest understoreys. © 2013 Scandinavian Plant Physiology Society.

Facet-dependent study of efficient growth of graphene on copper

Indian Academy of Sciences (India)

The growth of graphene by chemical vapour deposition (CVD) on copper is the most promising scalable method for high-quality graphene. The use of ethanol, an economic and safe precursor, for the fast growth of graphene on copper by a home-built CVD set-up was analysed. Full coverage of uniform single-layer ...

Do the ban on use of anti-microbial growth promoter impact on technical change and the efficiency of slaughter-pig production

DEFF Research Database (Denmark)

Lawson, Lartey; Otto, Lars; Jensen, Peter Vig

2005-01-01

infections, and in effect stimu-lated the utilization of feedstuff and reduced the mortality rate. However, fears for increas-ing bacteria resistance with subsequent health hazards for humans and livestock has lead to societal debates about the pros and cons of its use in livestock production. Antibiotic......This study aims at investigating the effects of the ban on the use of anti-microbial growth promoters in the production of “Finishing Pigs” for slaughter. We investigate if the ban on the use of anti-microbial growth promoters has for specialised pig-producers altered the productivity of inputs......, technical change and the efficiency of production. This paper complements an earlier paper that investigated the impact of the ban on weaned-pig produc-tion. Background: The study is motivated by the fact that antimicrobial growth promoters have been known world wide to protect livestock from bacteria...

Influence of catch-up growth on abdominal fat distribution in very low birth weight children - cohort study.

Science.gov (United States)

Alves, João Guilherme; Vasconcelos, Sarita Amorim; de Almeida, Tais Sá; Lages, Raquel; Just, Eduardo

2015-01-01

A rapid catch-up growth in very low birth weight has been associated both with a higher height growth and a higher risk to metabolic disturbances, including insulin resistance and its consequences. Abdominal fat distribution in early postnatal life may play a role in these outcomes and can help in addressing this neonatal dilemma. This study aimed to compare abdominal fat distribution among very low birth weight (VLBW) children with and without rapid catch-up growth. A cohort study followed 86 VLBW (children born in Brazil, during the first 3 years of life. Rapid catch-up growth was considered as an increased in length >2 Z score during the first year of life. Abdominal subcutaneous and preperitoneal fat thickness was determined by ultrasound. χ²-Test and Student's t-test were used to compare the groups. A total of 79 VLBW children completed the study, of whom 22 (27.8%) showed rapid catch-up growth. Abdominal subcutaneous and preperitoneal fat thickness showed no differences among children with or without rapid catch-up growth at 3.3 mm vs. 3.8 mm, respectively (p=0.79) and 4.0 mm vs. 4.0 mm (p=0.55), respectively. VLBW children with rapid catch-up growth were also taller. Rapid catch-up growth during the first year of life in VLBW children does not seem to change abdominal fat distribution until the third year of life.

Embracing the River: Smart Growth Strategies for Assisting in Cedar Rapids' Recovery

Science.gov (United States)

This report from an EPA-FEMA technical assistance project with Cedar Rapids, IA, offers ideas to encourage infill development, make development more resilient to floods, and improve stormwater management.

Galaxy interactions trigger rapid black hole growth: An unprecedented view from the Hyper Suprime-Cam survey

Science.gov (United States)

Goulding, Andy D.; Greene, Jenny E.; Bezanson, Rachel; Greco, Johnny; Johnson, Sean; Leauthaud, Alexie; Matsuoka, Yoshiki; Medezinski, Elinor; Price-Whelan, Adrian M.

2018-01-01

Collisions and interactions between gas-rich galaxies are thought to be pivotal stages in their formation and evolution, causing the rapid production of new stars, and possibly serving as a mechanism for fueling supermassive black holes (BHs). Harnessing the exquisite spatial resolution (˜0{^''.}5) afforded by the first ˜170 deg2 of the Hyper Suprime-Cam (HSC) survey, we present our new constraints on the importance of galaxy-galaxy major mergers (1 : 4) in growing BHs throughout the last ˜8 Gyr. Utilizing mid-infrared observations in the WISE all-sky survey, we robustly select active galactic nuclei (AGN) and mass-matched control galaxy samples, totaling ˜140000 spectroscopically confirmed systems at i based on our comparison of AGN fractions in mass-matched samples, we determine that the most luminous AGN population (LAGN ≳ 1045 erg s-1) systematically reside in merging systems over non-interacting galaxies. Our findings show that galaxy-galaxy interactions do, on average, trigger luminous AGN activity substantially more often than in secularly evolving non-interacting galaxies, and we further suggest that the BH growth rate may be closely tied to the dynamical time of the merger system.

Flower Power: Sunflowers as a Model for Logistic Growth

Science.gov (United States)

Fernandez, Eileen; Geist, Kristi A.

2011-01-01

Logistic growth displays an interesting pattern: It starts fast, exhibiting the rapid growth characteristic of exponential models. As time passes, it slows in response to constraints such as limited resources or reallocation of energy. The growth continues to slow until it reaches a limit, called capacity. When the growth describes a population,…

Graphics processor efficiency for realization of rapid tabular computations

International Nuclear Information System (INIS)

Dudnik, V.A.; Kudryavtsev, V.I.; Us, S.A.; Shestakov, M.V.

2016-01-01

Capabilities of graphics processing units (GPU) and central processing units (CPU) have been investigated for realization of fast-calculation algorithms with the use of tabulated functions. The realization of tabulated functions is exemplified by the GPU/CPU architecture-based processors. Comparison is made between the operating efficiencies of GPU and CPU, employed for tabular calculations at different conditions of use. Recommendations are formulated for the use of graphical and central processors to speed up scientific and engineering computations through the use of tabulated functions

Essential oils improved weight gain, growth and feed efficiency of young dairy calves fed 18 or 20% crude protein starter diets.

Science.gov (United States)

Kazemi-Bonchenari, M; Falahati, R; Poorhamdollah, M; Heidari, S R; Pezeshki, A

2018-01-17

The objective was to evaluate interactions between starter protein (180 vs. 200 g/kg, DM basis) and a mixture of essential oils (EOs; containing thymol, eugenol, vanillin, limonene and guaiacol) on growth, metabolic and ruminal functions of Holstein dairy calves. In a completely randomized 2 × 2 factorial design, 48 calves, 3 days old (averaging BW 42.7 ± 1.9 kg), were allocated into groups fed the following diets: (i) 180 g/kg CP with no EO (180P-NEO); (ii) 180 g/kg CP with EO (180P-EO); (iii) 200 g/kg CP with no EO (200P-NEO); and (iv) 200 g/kg CP with EO (200P-EO). The EO was supplemented as 1 g/kg of starter DM. Calves were fed ad libitum starter diet and were weaned at day 59 of age, but diets continued until day 80. There were no interactive effects of CP and EO on intake and growth. Pre-weaning feed efficiency tended to be increased for 200P-EO (p = .09). Average daily gain and feed efficiency during pre-weaning period as well as weaning weight were increased (p calves-fed EO (p = .05) and was lower in those fed 180P vs. 200P (p feed efficiency of dairy calves, irrespective of dietary protein content. © 2018 Blackwell Verlag GmbH.

Semi-determinate growth habit adjusts the vegetative-to-reproductive balance and increases productivity and water-use efficiency in tomato (Solanum lycopersicum).

Science.gov (United States)

Vicente, Mateus Henrique; Zsögön, Agustin; de Sá, Ariadne Felicio Lopo; Ribeiro, Rafael V; Peres, Lázaro E P

2015-04-01

Tomato (Solanum lycopersicum) shows three growth habits: determinate, indeterminate and semi-determinate. These are controlled mainly by allelic variation in the self-pruning (SP) gene family, which also includes the "florigen" gene single flower TRUSS (SFT). Determinate cultivars have synchronized flower and fruit production, which allows mechanical harvesting in the tomato processing industry, whereas indeterminate ones have more vegetative growth with continuous flower and fruit formation, being thus preferred for fresh market tomato production. The semi-determinate growth habit is poorly understood, although there are indications that it combines advantages of determinate and indeterminate growth. Here, we used near-isogenic lines (NILs) in the cultivar Micro-Tom (MT) with different growth habit to characterize semi-determinate growth and to determine its impact on developmental and productivity traits. We show that semi-determinate genotypes are equivalent to determinate ones with extended vegetative growth, which in turn impacts shoot height, number of leaves and either stem diameter or internode length. Semi-determinate plants also tend to increase the highly relevant agronomic parameter Brix × ripe yield (BRY). Water-use efficiency (WUE), evaluated either directly as dry mass produced per amount of water transpired or indirectly through C isotope discrimination, was higher in semi-determinate genotypes. We also provide evidence that the increases in BRY in semi-determinate genotypes are a consequence of an improved balance between vegetative and reproductive growth, a mechanism analogous to the conversion of the overly vegetative tall cereal varieties into well-balanced semi-dwarf ones used in the Green Revolution. Copyright © 2015 Elsevier GmbH. All rights reserved.

[Maintenance ration and conversion efficiency of Hyporhamphus sajori].

Science.gov (United States)

Guo, X; Tang, Q

2001-04-01

The maintenance ration and conversion efficiency of Japanese halfbeak, Hyporhamphus sajori were tested with enclosures installed in a shrimp raising pond. The results showed that there existed an evident relationship between daily ration(DR) and growth rate(GR) of the fish, GR = 140.37 DR - 24.03. The conversion efficiency was 13.96% in biomass or 16.12% in energy. The maintenance ration was 17.12% and 20.39% of body weight in terms of growth rate and specific growth rate, respectively, indicating that it could be deduced from growth rate quite differently from that from specific growth rate in the same experiment. The abnormal growth rate appeared when daily ration was below 3.30% of body weight, implied that Japanese halfbeak may get other food resources besides supplied net zooplankton.

SOCIAL INEQUALITY IN CHINA AS A RESULT OF THE RAPID ECONOMIC GROWTH

Directory of Open Access Journals (Sweden)

Вероника Игоревна Шехурдина

2013-12-01

Full Text Available Since the period of openness in China, laid the foundation for more than 30 years ago, he has made remarkable progress in increasing incomes and reducing absolute poverty. However, they are caused by rising inequality. It should be noted that the rise in inequality was seen almost everywhere in the world over the past two decades. Growing dissatisfaction with the quality of economic growth is often seen in favor of certain groups more than the general population. This is clearly reflected in the growth of inequality between different groups - the rich are getting richer faster than the poor. The economic literature attributes this mainly to globalization, technological change, skills-based, and reduce the "power" of the workers. Growth model, which accompanies the last three decades to China, included a trade-off between high growth (and subsequent reduction of absolute poverty and worsening inequality. The government of China has recognized this problem and taken active steps to reduce the gap incomes and standards of living in the city and rural areas, which have already brought the first results.DOI: http://dx.doi.org/10.12731/2218-7405-2013-10-16

Rapid Characterization of Bacterial Electrogenicity Using a Single-Sheet Paper-Based Electrofluidic Array

Directory of Open Access Journals (Sweden)

Yang Gao

2017-07-01

Full Text Available Electrogenicity, or bacterial electron transfer capacity, is an important application which offers environmentally sustainable advances in the fields of biofuels, wastewater treatment, bioremediation, desalination, and biosensing. Significant boosts in this technology can be achieved with the growth of synthetic biology that manipulates microbial electron transfer pathways, thereby potentially significantly improving their electrogenic potential. There is currently a need for a high-throughput, rapid, and highly sensitive test array to evaluate the electrogenic properties of newly discovered and/or genetically engineered bacterial species. In this work, we report a single-sheet, paper-based electrofluidic (incorporating both electronic and fluidic structure screening platform for rapid, sensitive, and potentially high-throughput characterization of bacterial electrogenicity. This novel screening array uses (i a commercially available wax printer for hydrophobic wax patterning on a single sheet of paper and (ii water-dispersed electrically conducting polymer mixture, poly(3,4-ethylenedioxythiophene:polystyrene sulfonate, for full integration of electronic and fluidic components into the paper substrate. The engineered 3-D, microporous, hydrophilic, and conductive paper structure provides a large surface area for efficient electron transfer. This results in rapid and sensitive power assessment of electrogenic bacteria from a microliter sample volume. We validated the effectiveness of the sensor array using hypothesis-driven genetically modified Pseudomonas aeruginosa mutant strains. Within 20 min, we observed that the sensor platform successfully measured the electricity-generating capacities of five isogenic mutants of P. aeruginosa while distinguishing their differences from genetically unmodified bacteria.

Spatial and Temporal Evolution of Urban Systems in China during Rapid Urbanization

Directory of Open Access Journals (Sweden)

Huan Li

2016-07-01

Full Text Available The structure of urban hierarchy and the role of cities of different sizes have drawn considerable scholarly interests and societal concerns. This paper analyzes the evolution and underlying mechanisms of urban hierarchy in China during the recent period of rapid urbanization. By comparing scale changes of seven types of cities (megacity, large city, Type I big city, Type II big city, medium-sized city, type I small city and type II small city, we find that allometry is the main characteristic of urban hierarchical evolution in China. We also test the validity of Zipf’s law and Gibrat’s law, which broaden the scope of existing studies by including county-level cities. We find that urban hierarchical distribution is lognormal, rather than Pareto. The result also shows that city size growth rates are constant across cities of different types. For better understanding of the mechanisms of urban hierarchical formation, we measure the optimal city size and resource allocation by the Pareto optimality criterion and non-parametric frontier method. The main findings are as follows: (1 scale efficiency is still at a relatively low level among the seven types of cities; (2 the economic efficiency of megacities and large cities is overestimated when compared to economic-environmental efficiency. Hence, this paper has two policy implications: (1 to correct factor market (land, labor and infrastructure investment distortions among different types of cities for the improvement of efficiency; (2 to strengthen rural property rights to improve social equity, as well as land use intensity.

NADPH promotes the rapid growth of the tumor

Directory of Open Access Journals (Sweden)

Hao Sheng

2018-04-01

Full Text Available NADPH oxidase is the main source of intracellular reactive oxygen species (ROS. ROS plays an important role in a variety of tumor types. The ROS mediated by NADPH oxidase increases the expression of hypoxia-inducible factor alpha (HIF-α through multiple signaling pathways in tumor, and HIF-α could be regulated and controlled by downstream multiple targeted genes such as vascular endothelial growth factor, glucose transporter to promote tumor angiogenesis, cell energy metabolism reprogram and tumor metastasis. Meanwhile, HIF-α can also regulate the expression of NADPH oxidase by ROS, thus further promoting development of tumor. In this review, we summarized the functions of NADPH in tumorigenesis and discussed their potential implications in cancer therapy.

Evaluation of a multiple-cycle, recombinant virus, growth competition assay that uses flow cytometry to measure replication efficiency of human immunodeficiency virus type 1 in cell culture.

Science.gov (United States)

Dykes, Carrie; Wang, Jiong; Jin, Xia; Planelles, Vicente; An, Dong Sung; Tallo, Amanda; Huang, Yangxin; Wu, Hulin; Demeter, Lisa M

2006-06-01

Human immunodeficiency virus type 1 (HIV-1) replication efficiency or fitness, as measured in cell culture, has been postulated to correlate with clinical outcome of HIV infection, although this is still controversial. One limitation is the lack of high-throughput assays that can measure replication efficiency over multiple rounds of replication. We have developed a multiple-cycle growth competition assay to measure HIV-1 replication efficiency that uses flow cytometry to determine the relative proportions of test and reference viruses, each of which expresses a different reporter gene in place of nef. The reporter genes are expressed on the surface of infected cells and are detected by commercially available fluorescence-labeled antibodies. This method is less labor-intensive than those that require isolation and amplification of nucleic acids. The two reporter gene products are detected with similar specificity and sensitivity, and the proportion of infected cells in culture correlates with the amount of viral p24 antigen produced in the culture supernatant. HIV replication efficiencies of six different drug-resistant site-directed mutants were reproducibly quantified and were similar to those obtained with a growth competition assay in which the relative proportion of each variant was measured by sequence analysis, indicating that recombination between the pol and reporter genes was negligible. This assay also reproducibly quantified the relative fitness conferred by protease and reverse transcriptase sequences containing multiple drug resistance mutations, amplified from patient plasma. This flow cytometry-based growth competition assay offers advantages over current assays for HIV replication efficiency and should prove useful for the evaluation of patient samples in clinical trials.

Footprint analysis during the growth period.

Science.gov (United States)

Volpon, J B

1994-01-01

Static footprints were obtained from 672 healthy white subjects ranging in age from newborn to 15 years. The length of the footprint was measured and the medial longitudinal arch was evaluated. The findings showed that the feet grew most rapidly up to 3 years of age. From age 3 onward, the feet maintained an almost constant growth rate, which was the same for both sexes until age 12 years, when girls' feet stopped growing, but boys' feet exhibited further growth. From birth up to 2 years of age, there was a higher incidence of flat feet. Rapid progression of plantar arch development was observed between 2 and 6 years of age.

Orthopedic treatment of Class III malocclusion with rapid maxillary expansion combined with a face mask: a cephalometric assessment of craniofacial growth patterns

Directory of Open Access Journals (Sweden)

Daniella Torres Tagawa

2012-06-01

Full Text Available OBJECTIVE: The aim of this prospective study was to assess potential changes in the cephalometric craniofacial growth pattern of 17 children presenting Angle Class III malocclusion treated with a Haas-type expander combined with a face mask. METHODS: Lateral cephalometric radiographs were taken at beginning (T1 and immediately after removal of the appliances (T2, average of 11 months of treatment. Linear and angular measurements were used to evaluate the cranial base, dentoskeletal changes and facial growth pattern. RESULTS: The length of the anterior cranial base experienced a reduction while the posterior cranial base assumed a more vertical position at T1. Some maxillary movement occurred, there was no rotation of the palatal plane, there was a slight clockwise rotation of the mandible, although not significant. The ANB angle increased, thereby improving the relationship between the jaws; dentoalveolar compensation was more evident in the lower incisors. Five out of 12 cases (29.41% showed the following changes: In one case the pattern became more horizontal and in four cases more vertical. CONCLUSIONS: It was concluded after a short-term assessment that treatment with rapid maxillary expansion (RME associated with a face mask was effective in the correction of Class III malocclusion despite the changes in facial growth pattern observed in a few cases.

World pipeline work set for rapid growth

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports on international pipeline construction which has entered a fast-growth period, accelerated by the new political and economic realities around the world and increasing demand for natural gas, crude oil and refined petroleum products. Many projects are under way or in planning for completion in the mid- to late 1990s in Europe, South America, Asia and the Middle East. Pipeline And Gas Journal's projection calls for construction or other work on 30,700 miles of new natural gas, crude oil and refined products pipelines in the 1992-93 period outside Canada and the U.S. These projects will cost an estimated $30 billion-plus. Natural gas pipelines will comprise most of the mileage, accounting for almost 23,000 miles at an estimated cost of $26.3 billion. Products pipelines, planned or under construction, will add another 5,800 miles at a cost of $2.8 billion. Crude oil pipelines, at a minimum, will total 1,900 new miles at a cost of slightly under $1 billion

The Biology and Economics of Coral Growth

NARCIS (Netherlands)

Osinga, R.; Schutter, M.; Griffioen, B.; Wijffels, R.H.; Verreth, J.A.J.; Shafit, S.; Henard, S.; Taruffi, M.; Gili, C.; Lavorano, S.

2011-01-01

To protect natural coral reefs, it is of utmost importance to understand how the growth of the main reef-building organisms-the zooxanthellate scleractinian corals-is controlled. Understanding coral growth is also relevant for coral aquaculture, which is a rapidly developing business. This review

Green growth in the Netherlands

International Nuclear Information System (INIS)

Balde, K.; Boelens, A.; Brinksma, E.; Edens, B.; Hiethaar, S.; Klein, P.; Schenau, S.

2011-04-01

In 2009 the Ministerial Council Meeting of the Organisation for Economic Co-operation and Development (OECD) committed itself to a green growth strategy. Such a strategy fosters economic growth and development while ensuring that natural resources can continue to provide the ecosystem services on which our well-being relies. It also endorses investment, competition and innovation which will underpin sustained growth and give rise to new economic opportunities. Green growth provides both a policy strategy for implementing this economic transformation and a monitoring framework with a proposed set of indicators. This report presents an overview of the state of green growth in the Netherlands. It should be regarded as a benchmark for a more thorough and comprehensive assessment of green growth in the future. It is based on the set of indicators proposed by the OECD in their intermediate report of February 2011. Data relevant to the Dutch situation are presented for twenty of these indicators, illustrating the observed trends. The indicators are grouped in four themes. For the first theme, environmental efficiency of production, on the whole the indicators show increased efficiency. However, indicators such as greenhouse gas intensity, energy efficiency and material intensity show only relative decoupling, which on its own is not enough to ensure green growth. In addition, the increase in environmental efficiency is partly explained by substitution of imports for domestic production, which is not conducive to green growth on a global scale: the efficiency gains in domestic production, for example, are offset by increases in foreign greenhouse gas emissions. Water use and agricultural nutrient surpluses are the only indicators where absolute decoupling has occurred. The second theme contains indicators regarding the natural assets base. This group of indicators provides a mixed picture. Natural gas reserves are decreasing and the overall level of threat to animal

Rapid antibiotic susceptibility testing in a microfluidic pH sensor.

Science.gov (United States)

Tang, Yanyan; Zhen, Li; Liu, Jingqing; Wu, Jianmin

2013-03-05

For appropriate selection of antibiotics in the treatment of pathogen infection, rapid antibiotic susceptibility testing (AST) is urgently needed in clinical practice. This study reports the utilization of a microfluidic pH sensor for monitoring bacterial growth rate in culture media spiked with different kinds of antibiotics. The microfluidic pH sensor was fabricated by integration of pH-sensitive chitosan hydrogel with poly(dimethylsiloxane) (PDMS) microfluidic channels. For facilitating the reflectometric interference spectroscopic measurements, the chitosan hydrogel was coated on an electrochemically etched porous silicon chip, which was used as the substrate of the microfluidic channel. Real-time observation of the pH change in the microchannel can be realized by Fourier transform reflectometric interference spectroscopy (FT-RIFS), in which the effective optical thickness (EOT) was selected as the optical signal for indicating the reversible swelling process of chitosan hydrogel stimulated by pH change. With this microfluidic pH sensor, we demonstrate that confinement of bacterial cells in a nanoliter size channel allows rapid accumulation of metabolic products and eliminates the need for long-time preincubation, thus reducing the whole detection time. On the basis of this technology, the whole bacterial growth curve can be obtained in less than 2 h, and consequently rapid AST can be realized. Compared with conventional methods, the AST data acquired from the bacterial growth curve can provide more detailed information for studying the antimicrobial behavior of antibiotics during different stages. Furthermore, the new technology also provides a convenient method for rapid minimal inhibition concentration (MIC) determination of individual antibiotics or the combinations of antibiotics against human pathogens that will find application in clinical and point-of-care medicine.

Rapid MR imaging

International Nuclear Information System (INIS)

Edelman, R.R.; Buxton, R.B.; Brady, T.J.

1988-01-01

Conventional magnetic resonance (MR) imaging methods typically require several minutes to produce an image, but the periods of respiration, cardiac motion and peristalsis are on the order of seconds or less. The need to reduce motion artifact, as well as the need to reduce imaging time for patient comfort and efficiency, have provided a strong impetus for the development of rapid imaging methods. For abdominal imaging, motion artifacts due to respiration can be significantly reduced by collecting the entire image during one breath hold. For other applications, such as following the kinetics of administered contrast agents, rapid imaging is essential to achieve adequate time resolution. A shorter imaging time entails a cost in image signal/noise (S/N), but improvements in recent years in magnet homogeneity, gradient and radiofrequency coil design have led to steady improvements in S/N and consequently in image quality. For many chemical applications the available S/N is greater than needed, and a trade-off of lower S/N for a shorter imaging time is acceptable. In this chapter, the authors consider the underlying principles of rapid imaging as well as clinical applications of these methods. The bulk of this review concentrates on short TR imaging, but methods that provide for a more modest decrease in imaging time as well as or those that dramatically shorten the imaging time to tens of milliseconds are also discussed

Rapid Measurements of Aerosol Size Distribution and Hygroscopic Growth via Image Processing with a Fast Integrated Mobility Spectrometer (FIMS)

Science.gov (United States)

Wang, Y.; Pinterich, T.; Spielman, S. R.; Hering, S. V.; Wang, J.

2017-12-01

Aerosol size distribution and hygroscopicity are among key parameters in determining the impact of atmospheric aerosols on global radiation and climate change. In situ submicron aerosol size distribution measurements commonly involve a scanning mobility particle sizer (SMPS). The SMPS scanning time is in the scale of minutes, which is often too slow to capture the variation of aerosol size distribution, such as for aerosols formed via nucleation processes or measurements onboard research aircraft. To solve this problem, a Fast Integrated Mobility Spectrometer (FIMS) based on image processing was developed for rapid measurements of aerosol size distributions from 10 to 500 nm. The FIMS consists of a parallel plate classifier, a condenser, and a CCD detector array. Inside the classifier an electric field separates charged aerosols based on electrical mobilities. Upon exiting the classifier, the aerosols pass through a three stage growth channel (Pinterich et al. 2017; Spielman et al. 2017), where aerosols as small as 7 nm are enlarged to above 1 μm through water or heptanol condensation. Finally, the grown aerosols are illuminated by a laser sheet and imaged onto a CCD array. The images provide both aerosol concentration and position, which directly relate to the aerosol size distribution. By this simultaneous measurement of aerosols with different sizes, the FIMS provides aerosol size spectra nearly 100 times faster than the SMPS. Recent deployment onboard research aircraft demonstrated that the FIMS is capable of measuring aerosol size distributions in 1s (Figure), thereby offering a great advantage in applications requiring high time resolution (Wang et al. 2016). In addition, the coupling of the FIMS with other conventional aerosol instruments provides orders of magnitude more rapid characterization of aerosol optical and microphysical properties. For example, the combination of a differential mobility analyzer, a relative humidity control unit, and a FIMS was

Synchrotron x-ray study of a low roughness and high efficiency K2CsSb photocathode during film growth

International Nuclear Information System (INIS)

Xie, Junqi; Demarteau, Marcel; Wagner, Robert; Schubert, Susanne; Gaowei, Mengjia; Attenkofer, Klaus; Walsh, John; Smedley, John; Ben-Zvi, Ilan; Wong, Jared; Feng, Jun; Padmore, Howard; Ruiz-Oses, Miguel; Ding, Zihao; Liang, Xue; Muller, Erik

2017-01-01

Reduction of roughness to the nm level is critical of achieving the ultimate performance from photocathodes used in high gradient fields. The thrust of this paper is to explore the evolution of roughness during sequential growth, and to show that deposition of multilayer structures consisting of very thin reacted layers results in an nm level smooth photocathode. Synchrotron x-ray methods were applied to study the multi-step growth process of a high efficiency K 2 CsSb photocathode. A transition point of the Sb film grown on Si was observed at the film thickness of ∼40 Å with the substrate temperature at 100 °C and the growth rate at 0.1 Å s −1 . The final K 2 CsSb photocathode exhibits a thickness of around five times that of the total deposited Sb film regardless of how the Sb film was grown. The film surface roughening process occurs first at the step when K diffuses into the crystalline Sb. The photocathode obtained from the multi-step growth exhibits roughness in an order of magnitude lower than the normal sequential process. X-ray diffraction measurements show that the material goes through two structural changes of the crystalline phase during formation, from crystalline Sb to K 3 Sb and finally to K 2 CsSb. (paper)

Efficient composite fabrication using electron-beam rapidly cured polymers engineered for several manufacturing processes

International Nuclear Information System (INIS)

Walton, T.C.; Crivello, J.V.

1995-01-01

Low cost, efficiently processed ultra high specific strength and stiffness graphite fiber reinforced polymeric composite materials are of great interest to commercial transportation, construction and aerospace industries for use in various components with enhanced degrees of weight reduction, corrosion/erosion resistance and fatigue resistance. 10 MeV Electron Beam cure processing has been found to increase the cure rate by an order of magnitude over thermally cured systems yet provide less molded in stresses and high T g s. However, a limited range of resins are available which are easily processed with low shrinkage and with performance properties equal or exceeding those of state of the art toughened epoxies and BMI's. The technology, introduced by an academia-industry partnership sparked by Langley Research Center utilizes a cost effective, rapid curing polymeric composite processing technique which effectively reduces the need for expensive tooling and energy inefficient autoclave processing and can cure the laminate in seconds (compared to hours for thermal curing) in ambient or sub-ambient conditions. The process is based on electron beam (E-Beam) curing of a new series of (65 to 1,000,000 cPs.) specially formulated resins that have been shown to exhibit excellent mechanical and physical properties once cured. Fabrication processes utilizing these specially formulated and newly commercialized resins, (e.g. including Vacuum Assist Resin Transfer molding (VARTM), vacuum bag prepreg layup, pultrusion and filament winding grades) are engineered to cure with low shrinkage, provide excellent mechanical properties, be processed solventless (environmentally friendly) and are inherently non toxic

Carbon and nutrient use efficiencies optimally balance stoichiometric imbalances

Science.gov (United States)

Manzoni, Stefano; Čapek, Petr; Lindahl, Björn; Mooshammer, Maria; Richter, Andreas; Šantrůčková, Hana

2016-04-01

Decomposer organisms face large stoichiometric imbalances because their food is generally poor in nutrients compared to the decomposer cellular composition. The presence of excess carbon (C) requires adaptations to utilize nutrients effectively while disposing of or investing excess C. As food composition changes, these adaptations lead to variable C- and nutrient-use efficiencies (defined as the ratios of C and nutrients used for growth over the amounts consumed). For organisms to be ecologically competitive, these changes in efficiencies with resource stoichiometry have to balance advantages and disadvantages in an optimal way. We hypothesize that efficiencies are varied so that community growth rate is optimized along stoichiometric gradients of their resources. Building from previous theories, we predict that maximum growth is achieved when C and nutrients are co-limiting, so that the maximum C-use efficiency is reached, and nutrient release is minimized. This optimality principle is expected to be applicable across terrestrial-aquatic borders, to various elements, and at different trophic levels. While the growth rate maximization hypothesis has been evaluated for consumers and predators, in this contribution we test it for terrestrial and aquatic decomposers degrading resources across wide stoichiometry gradients. The optimality hypothesis predicts constant efficiencies at low substrate C:N and C:P, whereas above a stoichiometric threshold, C-use efficiency declines and nitrogen- and phosphorus-use efficiencies increase up to one. Thus, high resource C:N and C:P lead to low C-use efficiency, but effective retention of nitrogen and phosphorus. Predictions are broadly consistent with efficiency trends in decomposer communities across terrestrial and aquatic ecosystems.

Milk production and composition, and progeny performance in young ewes with high merit for rapid growth and muscle and fat accumulation.

Science.gov (United States)

Rosales Nieto, C A; Ferguson, M B; Macleay, C A; Briegel, J R; Wood, D A; Martin, G B; Bencini, R; Thompson, A N

2018-02-26

In ewe lambs, acceleration of growth and accumulation of both muscle and fat leads to earlier sexual maturity and better reproductive performance. The next stage in the development of this theme is to test whether these aspects of growth in young ewes affect milk production in their first lactation and the growth of their first progeny. We studied 75 young Merino ewes that had known phenotypic values for depth of eye muscle (EMD) and fat (FAT), and known Australian Sheep Breeding Values for post-weaning weight (PWT) and depths of eye muscle (PEMD) and fat (PFAT). They lambed for the first time at 1 year of age. Their lambs were weighed weekly from birth to weaning at 10 weeks to determine live weight gain and weaning weight. Progeny birth weight was positively associated with live weight gain and weaning weight (P0.05). The PWT of the sire was positively associated with live weight gain (P0.05). The concentrations of fat, protein, lactose and total solids in the milk were not affected by the phenotype or genotype of the mothers or of the sires of the mothers, or by the sex of the progeny (P>0.05). We conclude that selection of young Merino ewes for better growth, and more rapid accumulation of muscle and fat, will lead to progeny that are heavier at birth, grow faster and are heavier at weaning. Moreover, milk production and composition do not seem to be affected by the genetic merit of the mother for post-weaning live weight or PEMD or PFAT. Therefore, Merino ewes can lamb at 1 year of age without affecting the production objectives of the Merino sheep industry.

Cortical bone growth and maturational changes in dwarf rats induced by recombinant human growth hormone

Science.gov (United States)

Martinez, D. A.; Orth, M. W.; Carr, K. E.; Vanderby, R. Jr; Vailas, A. C.

1996-01-01

The growth hormone (GH)-deficient dwarf rat was used to investigate recombinant human (rh) GH-induced bone formation and to determine whether rhGH facilitates simultaneous increases in bone formation and bone maturation during rapid growth. Twenty dwarf rats, 37 days of age, were randomly assigned to dwarf plus rhGH (GH; n = 10) and dwarf plus vehicle (n = 10) groups. The GH group received 1.25 mg rhGH/kg body wt two times daily for 14 days. Biochemical, morphological, and X-ray diffraction measurements were performed on the femur middiaphysis. rhGH stimulated new bone growth in the GH group, as demonstrated by significant increases (P < 0.05) in longitudinal bone length (6%), middiaphyseal cross-sectional area (20%), and the amount of newly accreted bone collagen (28%) in the total pool of middiaphyseal bone collagen. Cortical bone density, mean hydroxyapatite crystal size, and the calcium and collagen contents (microgram/mm3) were significantly smaller in the GH group (P < 0.05). Our findings suggest that the processes regulating new collagen accretion, bone collagen maturation, and mean hydroxyapatite crystal size may be independently regulated during rapid growth.

Rapid flow cytometry analysis of antimicrobial properties of nettle powder and cranberry powder

Science.gov (United States)

Hattuniemi, Maarit; Korhonen, Johanna; Jaakkola, Mari; Räty, Jarkko; Virtanen, Vesa

2010-11-01

Both nettle (Urtica dioica) and cranberry (Vaccinium oxycoccus) are widely known to have good influence on health. The aim of this study was to investigate antimicrobial properties of nettle powder and cranberry powder against Escherichia coli (E. coli) and monitor the growth of the bacteria by a rapid flow cytometry (FCM) method. For FCM measurements samples were stained with fluorescent dyes. The inhibitory effects of plant material on growth of E. coli were estimated by comparing the results of control sample (E. coli) to E. coli samples with plant material. FCM offers both a brilliant tool to investigate the kinetics of the growth of bacterium, since subsamples can be taken from the same liquid medium during the growing period and with fluorescent dyes a rapid method to investigate viability of the bacterium.

Energy efficiency in industry and transportation

International Nuclear Information System (INIS)

Ruscoe, J.

1990-01-01

The discussion of energy issues has changed since the 1970s as improvements have been made in energy efficiency. The present capacity for surplus energy production in economically advanced countries reflects a decrease in energy requirements as well as new production sources. At the same time, the energy crisis can be seen as having discouraged improvements in energy efficiency because of its negative impact on growth. And the centrally planned economies remain highly inefficient energy users. Economic growth encourages the use of new technologies which are likely to be less energy-intensive than those they replace. Permanent gains in energy efficiency are derived from structural changes in the economy and from the introduction of energy-efficient technologies. This article addresses the prospect of increased energy conservation, particularly in industry (the end-use which consumes the most energy) and transportation. Although investments in projects to promote energy conservation are more cost-effective and environment-friendly than investments in energy supply, there is still widespread support for the latter. Developing countries naturally give preference to quantitative growth, with an increasing consumption of energy, but in these countries, too, more efficient use of energy could greatly reduce demand. The policies of international development agencies which still favour increasing energy supply over conservation need to change. Awareness of the need to reduce energy demand is, however, growing worldwide. (author)

Effect of the Microstructure of the Functional Layers on the Efficiency of Perovskite Solar Cells.

Science.gov (United States)

Huang, Fuzhi; Pascoe, Alexander R; Wu, Wu-Qiang; Ku, Zhiliang; Peng, Yong; Zhong, Jie; Caruso, Rachel A; Cheng, Yi-Bing

2017-05-01

The efficiencies of the hybrid organic-inorganic perovskite solar cells have been rapidly approaching the benchmarks held by the leading thin-film photovoltaic technologies. Arguably, one of the most important factors leading to this rapid advancement is the ability to manipulate the microstructure of the perovskite layer and the adjacent functional layers within the device. Here, an analysis of the nucleation and growth models relevant to the formation of perovskite films is provided, along with the effect of the perovskite microstructure (grain sizes and voids) on device performance. In addition, the effect of a compact or mesoporous electron-transport-layer (ETL) microstructure on the perovskite film formation and the optical/photoelectric properties at the ETL/perovskite interface are overviewed. Insight into the formation of the functional layers within a perovskite solar cell is provided, and potential avenues for further development of the perovskite microstructure are identified. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Combined effects of diets and temperature on mitochondrial function, growth and nutrient efficiency in rainbow trout (Oncorhynchus mykiss).

Science.gov (United States)

Eya, Jonathan C; Yossa, Rodrigue; Perera, Dayan; Okubajo, Olasupo; Gannam, Ann

2017-10-01

A 4×3 factorial experiment was conducted to evaluate the effects of two dietary protein sources (mixed fishmeal/plant protein-, and plant protein- based diet), two dietary lipid levels (10% and 20%) and three water temperatures (10°C, 14°C, and 18°C) on the growth performance, nutrient utilization efficiencies and mitochondrial enzyme complex activities in rainbow trout Oncorhynchus mykiss (average weight±SD, 39.5±5g) over a 180day rearing period. At the end of the experiment, weight gain (WG), condition factor (CF), and feed efficiency (FE) were significantly affected by diet×temperature interaction (Ptrout would be to use 40/10PP diet at 14°C because fish fed this treatment had a weight gain comparable to that of the fish fed the more expensive experimental diets (40/10 FM/PP, 40/20 FM/PP, and 40/20 PP). Copyright © 2017 Elsevier Inc. All rights reserved.

Biomass recycle as a means to improve the energy efficiency of CELSS algal culture systems

Science.gov (United States)

Radmer, R.; Cox, J.; Lieberman, D.; Behrens, P.; Arnett, K.

1987-01-01

Algal cultures can be very rapid and efficient means to generate biomass and regenerate the atmosphere for closed environmental life support systems. However, as in the case of most higher plants, a significant fraction of the biomass produced by most algae cannot be directly converted to a useful food product by standard food technology procedures. This waste biomass will serve as an energy drain on the overall system unless it can be efficiently recycled without a significant loss of its energy content. Experiments are reported in which cultures of the alga Scenedesmus obliquus were grown in the light and at the expense of an added carbon source, which either replaced or supplemented the actinic light. As part of these experiments, hydrolyzed waste biomass from these same algae were tested to determine whether the algae themselves could be made part of the biological recycling process. Results indicate that hydrolyzed algal (and plant) biomass can serve as carbon and energy sources for the growth of these algae, suggesting that the efficiency of the closed system could be significantly improved using this recycling process.

Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures

International Nuclear Information System (INIS)

Ganesh, P.; Kaul, R.; Paul, C.P.; Tiwari, Pragya; Rai, S.K.; Prasad, R.C.; Kukreja, L.M.

2010-01-01

Research highlights: → Mechanical test results of Laser rapid manufactured (LRM) Inconel 625 are reported. → 12 and 25 mm thick CT specimens of LRM Inconel 625 showed similar fatigue crack growth. → Stage II crack growth behavior is observed in the investigated ΔK range. → Fracture toughness testing by J-integral method yielded J 1c of about 200-250 kJ/m 2 . - Abstract: Fatigue crack growth and fracture toughness characteristics of laser rapid manufactured (LRMed) Inconel 625 compact tension specimens of thickness 12 and 25 mm were investigated. Fatigue crack propagation in all the specimens investigated in the stress intensity range (ΔK) of 14-38 MPa√m, exhibited stage II crack growth in Paris' regime with nearly same slopes of crack growth per cycle versus ΔK plot. Fatigue crack growth rates in the LRMed specimens of present study were found to be lower than the reported values for wrought Inconel 625 in the ΔK range of 14-24 MPa√m and above this range they tended to coincide. X-ray diffraction patterns of the fractured surfaces revealed that the crack propagated along the growth direction of the specimens which was predominantly along the (1 1 1) plane. The fracture toughness values (J 0.2 ) for LRMed Inconel 625 specimens were found to be in the range of about 200-255 kJ/m 2 . The LRMed specimens exhibited stable crack growth during the J-integral test.

An efficient regeneration and rapid micropropagation protocol for Almond using dormant axillary buds as explants.

Science.gov (United States)

Choudhary, Ravish; Chaudhury, Rekha; Malik, Surendra Kumar; Sharma, Kailash Chandra

2015-07-01

An efficient in vitro protocol was standardized for Almond (Prunus dulcis) propagation using dormant axillary buds as explants. Explants were cultured on Murashige and Skoog (MS) and woody plant medium (WPM) supplemented with different concentration/combination(s) of phytohormones. MS basal medium showed lowest shoot induction and took longest duration for shoot initiation. Multiple shoots were induced in MS medium supplemented with the combination of BAP (0.5 mgL(-1)). Cultures showed poor response for rooting in all combinations of plant growth regulators (PGRs) and took 90 days for initiation. Rooting was higher in half strength of MS than in full-strength. The highest root induction (33.33%) was recorded in half MS medium supplemented with 0.1 mgL(-1) IBA (indole-3-butyric acid) followed by full strength of MS medium (20%) supplemented with IBA (0.1 mgL(-1)). α-Naphthalene acetic acid (NAA) was less effective for rooting than IBA. The highest root induction (25%) was found in half strength of MS medium supplemented with 0.1 mgL(-1) NAA followed by full strength of MS medium (20%). The protocol developed would be of use in mass propagation of almond and also support in vitro conservation.

Single wafer rapid thermal multiprocessing

International Nuclear Information System (INIS)

Saraswat, K.C.; Moslehi, M.M.; Grossman, D.D.; Wood, S.; Wright, P.; Booth, L.

1989-01-01

Future success in microelectronics will demand rapid innovation, rapid product introduction and ability to react to a change in technological and business climate quickly. These technological advances in integrated electronics will require development of flexible manufacturing technology for VLSI systems. However, the current approach of establishing factories for mass manufacturing of chips at a cost of more than 200 million dollars is detrimental to flexible manufacturing. The authors propose concepts of a micro factory which may be characterized by more economical small scale production, higher flexibility to accommodate many products on several processes, and faster turnaround and learning. In-situ multiprocessing equipment where several process steps can be done in sequence may be a key ingredient in this approach. For this environment to be flexible, the equipment must have ability to change processing environment, requiring extensive in-situ measurements and real time control. This paper describes the development of a novel single wafer rapid thermal multiprocessing (RTM) reactor for next generation flexible VLSI manufacturing. This reactor will combine lamp heating, remote microwave plasma and photo processing in a single cold-wall chamber, with applications for multilayer in-situ growth and deposition of dielectrics, semiconductors and metals

Risks and Benefits of Rapid Clozapine Titration.

Science.gov (United States)

Lochhead, Jeannie D; Nelson, Michele A; Schneider, Alan L

2016-05-18

Clozapine is often considered the gold standard for the treatment of schizophrenia. Clinical guidelines suggest a gradual titration over 2 weeks to reduce the risks of adverse events such as seizures, hypotension, agranulocytosis, and myocarditis. The slow titration often delays time to therapeutic response. This raises the question of whether, in some patients, it may be safe to use a more rapid clozapine titration. The following case illustrates the potential risks associated with the use of multiple antipsychotics and rapid clozapine titration. We present the case of a young man with schizophrenia who developed life threatening neuroleptic malignant syndrome (NMS) during rapid clozapine titration and treatment with multiple antipsychotics. We were unable to find another case in the literature of NMS associated with rapid clozapine titration. This case is meant to urge clinicians to carefully evaluate the risks and benefits of rapid clozapine titration, and to encourage researchers to further evaluate the safety of rapid clozapine titration. Rapid clozapine titration has implications for decreasing health care costs associated with prolonged hospitalizations, and decreasing the emotional suffering associated with uncontrolled symptoms of psychosis. Clozapine is considered the most effective antipsychotic available thus efforts should focus on developing strategies that would allow for safest and most efficient use of clozapine to encourage its utilization for treatment resistance schizophrenia.

Risks and benefits of rapid clozapine titration

Directory of Open Access Journals (Sweden)

Jeannie D. Lochhead

2016-05-01

Full Text Available Clozapine is often considered the gold standard for the treatment of schizophrenia. Clinical guidelines suggest a gradual titration over 2 weeks to reduce the risks of adverse events such as seizures, hypotension, agranulocytosis, and myocarditis. The slow titration often delays time to therapeutic response. This raises the question of whether, in some patients, it may be safe to use a more rapid clozapine titration. The following case illustrates the potential risks associated with the use of multiple antipsychotics and rapid clozapine titration. We present the case of a young man with schizophrenia who developed life threatening neuroleptic malignant syndrome (NMS during rapid clozapine titration and treatment with multiple antipsychotics. We were unable to find another case in the literature of NMS associated with rapid clozapine titration. This case is meant to urge clinicians to carefully evaluate the risks and benefits of rapid clozapine titration, and to encourage researchers to further evaluate the safety of rapid clozapine titration. Rapid clozapine titration has implications for decreasing health care costs associated with prolonged hospitalizations, and decreasing the emotional suffering associated with uncontrolled symptoms of psychosis. Clozapine is considered the most effective antipsychotic available thus efforts should focus on developing strategies that would allow for safest and most efficient use of clozapine to encourage its utilization for treatment resistance schizophrenia.

Rapid and sustained cost management

International Nuclear Information System (INIS)

Hanson, D.

2009-01-01

Accenture helps clients develop comprehensive, process-driven strategies for rapid and sustained cost management that leverage deep insights and analytics. This approach enables companies to gain operating cost advantages by rationalizing, simplifying and automating current operating capabilities. It drives structural cost advantages by optimizing business mix, capital structure, organizational structure and geographic presence. This paper discussed how successful companies achieve high performance during times of economic turmoil. It also discussed the value of the winner's strategy in terms of rapid and sustained cost management (RSCM). It discussed how Accenture operates and its leveraged capabilities, improved efficiency, margins and cash flow while maintaining customer service levels. Building structural advantage and the Accenture difference were also discussed. It was concluded that RSCM is one vital way that Accenture can help companies achieve success. 4 figs

Rapid scanning system for fuel drawers

International Nuclear Information System (INIS)

Caldwell, J.T.; Fehlau, P.E.; France, S.W.

1981-01-01

A nondestructive method for uniqely distinguishing among and quantifying the mass of individual fuel plates in situ in fuel drawers utilized in nuclear reactors is described. The method is both rapid and passive, eliminating the personnel hazard of the commonly used irradiation techniques which require that the analysis be performed in proximity to an intense neutron source such as a reactor. In the present technique, only normally decaying nuclei are observed. This allows the analysis to be performed anywhere. This feature, combined with rapid scanning of a given fuel drawer (in approximately 30 s), and the computer data analysis allows the processing of large numbers of fuel drawers efficiently in the event of a loss alert

A Rapid and Efficient Method for Purifying High Quality Total RNA from Peaches (Prunus persica for Functional Genomics Analyses

Directory of Open Access Journals (Sweden)

LEE MEISEL

2005-01-01

Full Text Available Prunus persica has been proposed as a genomic model for deciduous trees and the Rosaceae family. Optimized protocols for RNA isolation are necessary to further advance studies in this model species such that functional genomics analyses may be performed. Here we present an optimized protocol to rapidly and efficiently purify high quality total RNA from peach fruits (Prunus persica. Isolating high-quality RNA from fruit tissue is often difficult due to large quantities of polysaccharides and polyphenolic compounds that accumulate in this tissue and co-purify with the RNA. Here we demonstrate that a modified version of the method used to isolate RNA from pine trees and the woody plant Cinnamomun tenuipilum is ideal for isolating high quality RNA from the fruits of Prunus persica. This RNA may be used for many functional genomic based experiments such as RT-PCR and the construction of large-insert cDNA libraries.

Rapid determination of nanowires electrical properties using a dielectrophoresis-well based system

Science.gov (United States)

Constantinou, Marios; Hoettges, Kai F.; Krylyuk, Sergiy; Katz, Michael B.; Davydov, Albert; Rigas, Grigorios-Panagiotis; Stolojan, Vlad; Hughes, Michael P.; Shkunov, Maxim

2017-03-01

The use of high quality semiconducting nanomaterials for advanced device applications has been hampered by the unavoidable growth variability of electrical properties of one-dimensional nanomaterials, such as nanowires and nanotubes, thus highlighting the need for the characterization of efficient semiconducting nanomaterials. In this study, we demonstrate a low-cost, industrially scalable dielectrophoretic (DEP) nanowire assembly method for the rapid analysis of the electrical properties of inorganic single crystalline nanowires, by identifying key features in the DEP frequency response spectrum from 1 kHz to 20 MHz in just 60 s. Nanowires dispersed in anisole were characterized using a three-dimensional DEP chip (3DEP), and the resultant spectrum demonstrated a sharp change in nanowire response to DEP signal in 1-20 MHz frequency range. The 3DEP analysis, directly confirmed by field-effect transistor data, indicates that nanowires of higher quality are collected at high DEP signal frequency range above 10 MHz, whereas lower quality nanowires, with two orders of magnitude lower current per nanowire, are collected at lower DEP signal frequencies. These results show that the 3DEP platform can be used as a very efficient characterization tool of the electrical properties of rod-shaped nanoparticles to enable dielectrophoretic selective deposition of nanomaterials with superior conductivity properties.

Rapid visualization of latent fingermarks using gold seed-mediated enhancement

Directory of Open Access Journals (Sweden)

Chia-Hao Su

2016-11-01

Full Text Available Abstract Background Fingermarks are one of the most important and useful forms of physical evidence in forensic investigations. However, latent fingermarks are not directly visible, but can be visualized due to the presence of other residues (such as inorganic salts, proteins, polypeptides, enzymes and human metabolites which can be detected or recognized through various strategies. Convenient and rapid techniques are still needed to provide obvious contrast between the background and the fingermark ridges and to then visualize latent fingermark with a high degree of selectivity and sensitivity. Results In this work, lysozyme-binding aptamer-conjugated Au nanoparticles (NPs are used to recognize and target lysozyme in the fingermark ridges, and Au+-complex solution is used as a growth agent to reduce Au+ from Au+ to Au0 on the surface of the Au NPs. Distinct fingermark patterns were visualized on a range of professional forensic within 3 min; the resulting images could be observed by the naked eye without background interference. The entire processes from fingermark collection to visualization only entails two steps and can be completed in less than 10 min. The proposed method provides cost and time savings over current fingermark visualization methods. Conclusions We report a simple, inexpensive, and fast method for the rapid visualization of latent fingermarks on the non-porous substrates using Au seed-mediated enhancement. Au seed-mediated enhancement is used to achieve the rapid visualization of latent fingermarks on non-porous substrates by the naked eye without the use of expensive or sophisticated instruments. The proposed approach offers faster detection and visualization of latent fingermarks than existing methods. The proposed method is expected to increase detection efficiency for latent fingermarks and reduce time requirements and costs for forensic investigations.

Effect of selenization conditions on the growth and properties of Cu2ZnSn(S,Se)4 thin films

OpenAIRE

Ranjbar, Samaneh; Rajesh Menon, M.R.; Fernandes, P.A.; da Cunha, A.F.

2015-01-01

The opto-electronic properties of copper zinc tin sulfide can be tuned to achieve better cell efficiencies by controlled incorporation of selenium. In this paper we report the growth of Cu2ZnSn(S,Se)4 (CZTSSe) using a hybrid process involving the sequential evaporation of Zn and sputtering of the sulfide precursors of Cu and Sn, followed by a selenization step. Two approaches for selenization were followed, one using a tubular furnace and the other using a rapid thermal processor. The effects...

Explaining African Growth Performance: A Production-Frontier Approach

OpenAIRE

Romain Houssa; Oleg Badunenko; Daniel J. Henderson

2010-01-01

This paper employs a production frontier approach that allows distinguishing technologic progress from efficiency development. Data on 35 African countries in 1970-2007 show that efficiency losses have constrained growth in Africa while technology progress has played a marginal growth enhancing role in the region. Moreover, physical and human capital accumulation are the main factors that drive productivity growth at the country level. Examining the outcomes of successful countries suggests t...

Plasma leptin and growth hormone levels in the fine flounder (Paralichthys adspersus) increase gradually during fasting and decline rapidly after refeeding.

Science.gov (United States)

Fuentes, Eduardo N; Kling, Peter; Einarsdottir, Ingibjörg Eir; Alvarez, Marco; Valdés, Juan Antonio; Molina, Alfredo; Björnsson, Björn Thrandur

2012-05-15

In fish, recent studies have indicated an anorexigenic role of leptin and thus its possible involvement in regulation of energy balance and growth. In the present study, the effects of fasting and refeeding periods on plasma leptin levels were studied in the fine flounder, a flatfish with remarkably slow growth. To further assess the endocrine status of the fish during periods of catabolism and anabolism, plasma growth hormone (GH) levels were also analyzed. Under normal feeding condition, plasma leptin and GH levels remained stable and relatively high in comparison with other teleost species. For the three separate groups of fish, fasted for 2, 3, and 4 weeks, respectively, plasma leptin levels increase gradually, becoming significantly elevated after 3 weeks, and reaching highest levels after 4-week fasting. Plasma GH levels were significantly elevated after 2-week fasting. At the onset of refeeding, following a single meal, leptin levels decline rapidly to lower than initial levels within 2 h, irrespective of the length of fasting. Plasma GH also decline, the decrease being significant after 4, 24 and 2 h for the 2, 3 and 4-week fasted groups, respectively. This study shows that plasma leptin levels in the fine flounder are strongly linked to nutritional status and suggests that leptin secretion is regulated by fast-acting mechanisms. Elevated leptin levels in fasted fish may contribute to a passive survival strategy of species which experience natural food shortage periods by lowering appetite and limiting physical foraging activity. Copyright © 2012 Elsevier Inc. All rights reserved.

The antifungal efficiency of carbide lime slurry compared with the commercial lime efficiency

Science.gov (United States)

Strigac, J.; Mikusinec, J.; Strigacova, J.; Stevulova, N.

2017-10-01

The article deals with studying the antifungal efficiency of carbide lime slurry compared to industrially manufactured commercial lime. Antifungal efficiency expressed as mould proofness properties was tested on the fungi using the procedure given in standard CSN 72 4310. A mixture of fungi Aspergillus niger, Chaetomium globosum, Penicillium funiculosum, Paecilomyces variotii and Gliocladium virens was utilized for testing. The scale for evaluating mould proofness properties according to CSN 72 4310 is from 0 to 5 in degree of fungi growth, where 0 means that no fungi growth occurs and the building products and materials possess fungistatic properties. The study confirms the fungistatic propeties of carbide lime slurry as well as industrially manufactured commercial lime. However, carbide lime slurry and industrially manufactured commercial lime possess no fungicidal effect.

CONSEQUENCES OF PROTIST-STIMULATED BACTERIAL PRODUCTION FOR ESTIMATING PROTIST GROWTH EFFICIENCIES

Science.gov (United States)

The trophic link between bacteria and bacterivorous protists is a complex interaction that involves feedback of inorganic nutrients and growth substrates that are immediately available for prey growth. These interactions were examined in the laboratory and in incubations of conce...

Future Air Conditioning Energy Consumption in Developing Countriesand what can be done about it: The Potential of Efficiency in theResidential Sector

Energy Technology Data Exchange (ETDEWEB)

McNeil, Michael A.; Letschert, Virginie E.

2007-05-01

The dynamics of air conditioning are of particular interestto energy analysts, both because of the high energy consumption of thisproduct, but also its disproportionate impact on peak load. This paperaddresses the special role of this end use as a driver of residentialelectricity consumption in rapidly developing economies. Recent historyhas shown that air conditioner ownership can grow grows more rapidly thaneconomic growth in warm-climate countries. In 1990, less than a percentof urban Chinese households owned an air conditioner; by 2003 this numberrose to 62 percent. The evidence suggests a similar explosion of airconditioner use in many other countries is not far behind. Room airconditioner purchases in India are currently growing at 20 percent peryear, with about half of these purchases attributed to the residentialsector. This paper draws on two distinct methodological elements toassess future residential air conditioner 'business as usual' electricityconsumption by country/region and to consider specific alternative 'highefficiency' scenarios. The first component is an econometric ownershipand use model based on household income, climate and demographicparameters. The second combines ownership forecasts and stock accountingwith geographically specific efficiency scenarios within a uniqueanalysis framework (BUENAS) developed by LBNL. The efficiency scenariomodule considers current efficiency baselines, available technologies,and achievable timelines for development of market transformationprograms, such as minimum efficiency performance standards (MEPS) andlabeling programs. The result is a detailed set of consumption andemissions scenarios for residential air conditioning.

The role of population on economic growth and development: evidence from developing countries

OpenAIRE

Atanda, Akinwande A.; Aminu, Salaudeen B.; Alimi, Olorunfemi Y.

2012-01-01

The precise relationship between population growth and per capita income has been inconclusive in the literature and the nexus has been found not clearly explain the determinants of rapid population growth in developing countries that lacks fertility control and management framework. This forms the rationale for this study to access the trend of factors that influence rapid population growth in developing countries between 1980 and 2010. This paper examined the comparative trend review of pop...

Heat stress and recovery of photosystem II efficiency in wheat (Triticum aestivum L.) cultivars acclimated to different growth temperatures

DEFF Research Database (Denmark)

Haque, Sabibul; Kjær, Katrine Heinsvig; Rosenqvist, Eva

2014-01-01

The effect of heat stress on photosystem II (PS II) efficiency and post-stress recovery was studied in four wheat cultivars using chlorophyll fluorescence. The main aim was to examine the cultivar differences in relation to inhibition and recovery of PSII functionality after heat stress...... and 25 °C) and subjected to heat stress (40 °C) for two days at early tillering and three days at anthesis and early grain development stages. The plants were returned to their original growth conditions after heat stress and recovery was observed for three days. The maximum photochemical efficiency (Fv...... heat tolerance characteristics as compared to the other three cultivars. The largest decrease in Fv/Fm and F′q/F′m after heat stress occurred in the cultivar PWS7, which did not recover completely after 72 h. All cultivars grown at 25 °C had a slightly increased heat tolerance and better recovery...

Growth performance and feed conversion efficiency of three edible mealworm species (Coleoptera: Tenebrionidae) on diets composed of organic by-products.

Science.gov (United States)

van Broekhoven, Sarah; Oonincx, Dennis G A B; van Huis, Arnold; van Loon, Joop J A

2015-02-01

Insects receive increasing attention as an alternative protein-rich food source for humans. Producing edible insects on diets composed of organic by-products could increase sustainability. In addition, insect growth rate and body composition, and hence nutritional quality, can be altered by diet. Three edible mealworm species Tenebrio molitor L., Zophobas atratus Fab. and Alphitobius diaperinus Panzer were grown on diets composed of organic by-products originating from beer brewing, bread/cookie baking, potato processing and bioethanol production. Experimental diets differed with respect to protein and starch content. Larval growth and survival was monitored. Moreover, effects of dietary composition on feed conversion efficiency and mealworm crude protein and fatty acid profile were assessed. Diet affected mealworm development and feed conversion efficiency such that diets high in yeast-derived protein appear favourable, compared to diets used by commercial breeders, with respect to shortening larval development time, reducing mortality and increasing weight gain. Diet also affected the chemical composition of mealworms. Larval protein content was stable on diets that differed 2-3-fold in protein content, whereas dietary fat did have an effect on larval fat content and fatty acid profile. However, larval fatty acid profile did not necessarily follow the same trend as dietary fatty acid composition. Diets that allowed for fast larval growth and low mortality in this study led to a comparable or less favourable n6/n3 fatty acid ratio compared to control diets used by commercial breeders. In conclusion, the mealworm species used in this study can be grown successfully on diets composed of organic by-products. Diet composition did not influence larval protein content, but did alter larval fat composition to a certain extent. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Rapidly progressive puberty in a patient with mosaic Turner syndrome: a case report and literature review].

Science.gov (United States)

Liang, Y; Wei, H; Yu, X; Huang, W; Luo, X P

2017-02-02

Objective: To explore the clinical characteristics of diagnosis and treatment in patients with Turner syndrome and rapidly progressive puberty. Method: A rare case of rapidly progressive puberty in Turner syndrome with a mosaic karyotype of 45, X/46, X, del(X)(p21)(80%/20%)was diagnosed at Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology in January. 2015. Clinical characteristics and the related literature were reviewed. Original papers on precocious puberty or rapidly progressive puberty in Turner syndrome, published until Apr. 2016 were retrieved at PubMed and CNKI databases by the use of the key words "Turner syndrome" , "precocious puberty" and "rapidly progressive puberty" . Result: The patient was born at term with birth weight of 2 450 g and was diagnosed with SGA at 3 years of age for the first evaluating of growth and development. Then recombined human growth hormone (rhGH )was given at 4 years of age due to short stature (heightTurner syndrome is reported. Although short stature and ovarian dysgenesis are common in TS, precocious puberty may occur in TS, which is liable to cause delayed diagnosis and misdiagnosis. Careful examination is recommended for patients with unusual growth pattern, even though girls have normal height in accord with standard growth curve or spontaneous puberty. Evaluation for TS and subsequent investigation should be prompted.

Interaction effects of water salinity and hydroponic growth medium on eggplant yield, water-use efficiency, and evapotranspiration

Directory of Open Access Journals (Sweden)

Farnoosh Mahjoor

2016-06-01

Full Text Available Eggplant (Solanum melongena L. is a plant native to tropical regions of Southeast Asia. The water crisis and drought on the one hand and eggplant greenhouse crop development as one of the most popular fruit vegetables for people on the other hand, led to the need for more research on the use of saline water and water stress to optimize salinity level and their impact on eggplant evapotranspiration and encounter better yield and crop quality. The objective of the present study was to investigate the interactions of water salinity and hydroponic growth medium on qualitative and quantitative properties of eggplant and its water-use efficiency. The study used the factorial experiment based on completely randomized design with three replications of four levels of water salinity (electrical conductivity of 0.8 (control, 2.5, 5, and 7 dS m−1 and three growth media (cocopeat, perlite, and a 50–50 mixture of the two by volume. Total yield, yield components, evapotranspiration, and water-use efficiency were determined during two growing periods, one each in 2012 and 2013. All of these indices decreased significantly as water salinity increased. Water with of 0.8 dS m−1 produced an average eggplant yield of 2510 g per plant in 2012 and 2600 g in 2013. The highest yield was observed in cocopeat. Water with 7 dS m−1 reduced yield to 906 g per plant in 2012 and to 960 g in 2013. Lowest yield was observed in perlite. The highest evapotranspiration values occurred in cocopeat at the lowest salinity in both years. Cocopeat and the cocopeat–perlite mixture were equally good substrates. The mixture significantly improved the quantitative and qualitative properties of eggplant yield.

Forest evaporation models: Relationships between stand growth and evaporation

CSIR Research Space (South Africa)

Le Maitre, David C

1997-06-01

Full Text Available The relationships between forest stand structure, growth and evaporation were analysed to determine whether forest evaporation can be estimated from stand growth data. This approach permits rapid assessment of the potential impacts of afforestation...

Mediterranean climate effects. II. Conifer growth phenology across a Sierra Nevada ecotone.

Science.gov (United States)

Royce, E B; Barbour, M G

2001-05-01

Growth and xylem water potential of the lower elevation conifers Pinus jeffreyi and Abies concolor and the higher elevation Pinus monticola and Abies magnifica were monitored in their montane Mediterranean habitat of the southernmost Sierra Nevada mountains of California. Measurements were made across the ecotone between the midmontane and upper montane forests and through light and heavy snowfall years.Radial stem growth, averaging ∼1.5 mm/yr, started 2 wk after snow melt, providing that maximum air temperatures had reached 21°C, and ended when predawn water potentials fell rapidly at the onset of the summer drought. Leader growth started on or after a fixed date, providing that minimum air temperatures were above -4°C for Pinus species or +2.5°C for Abies species. The cue for leader growth was inferred to be photoperiodic. Leader growth ended when either a determinate internode length of ∼1 mm was reached or predawn water potentials fell rapidly. Abies magnifica grew more rapidly than the low-elevation species, but had a shorter growth period; its annual leader growth, as a consequence, was only 35 mm/yr vs. 50 mm/yr for the low-elevation species. Needle growth was similarly determinate in the absence of early drought. This growth phenology contributes to determining species distribution across the ecotone.

Microwave-assisted rapid synthesis of Fe{sub 2}O{sub 3}/ACF hybrid for high efficient As(V) removal

Energy Technology Data Exchange (ETDEWEB)

Chen, Huiyun; Lv, Kangle; Du, Ying; Ye, Hengpeng; Du, Dongyun, E-mail: dydu666@mail.scuec.edu.cn

2016-07-25

In this paper, an efficient adsorbent, iron-modified activated carbon fiber (Fe{sub 2}O{sub 3}/ACF), was rapidly fabricated by microwave-assisted heating treatment strategy, which is used to remove As(V) from simulated wastewater. The adsorbent was characterized by scanning electron microscopy (SEM), TEM, N{sub 2} sorption, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The characterization results showed that rod-like Fe{sub 2}O{sub 3} particles in sizes of about 20 nm × 50 nm were homogeneously anchored on the surface of ACF. The goal of high As(V) removal efficiency was achieved with maximum adsorption capacity of 20.33 mg g{sup −1}. The effects of temperature on thermodynamics and kinetics of As(V) adsorption were systematically studied. It was found that the adsorption of As(V) on the surface of Fe{sub 2}O{sub 3}/ACF is an endothermic process with a standard enthalpy change (ΔH{sup 0}) of 24.79 kJ mol{sup −1}. Batch experimental result showed that almost all of the As(V) with initial concentration of 3.0 mg L{sup −1} can be removed in the presence of Fe{sub 2}O{sub 3}/ACF, where the residual As(V) in filtrate was less than 0.01 mg L{sup −1}, below the tolerance level of drinking water suggested by World Health Organization (WHO). The presence of salt such as NaCl, Na{sub 2}SO{sub 4}, and MgSO{sub 4} showed little effects on the adsorption of As(V), indicating the promising application of Fe{sub 2}O{sub 3}/ACF in industrial wastewater. - Highlights: • Fe{sub 2}O{sub 3}/ACF hybrid was rapidly fabricated using a microwave-assisted heating strategy. • Fe{sub 2}O{sub 3} nanorods in sizes of 20 × 50 nm were homogeneously anchored on the surface of ACF. • The maximum adsorption capacity of 20.33 mg g{sup −1} As (V) on Fe{sub 2}O{sub 3}/ACF was achieved. • The adsorption of As (V) is an endothermic process (ΔH{sup 0} = 24.79 kJ mol{sup −1}). • The presence of salt shows little effect on the adsorption of As (V).

Rapid increases in tropospheric ozone production and export from China

NARCIS (Netherlands)

Verstraeten, W.W.; Neu, J.L.; Williams, J.E.; Bowman, K.W.; Worden, J.R.; Boersma, K.F.

2015-01-01

Rapid population growth and industrialization have driven substantial increases in Asian ozone precursor emissions over the past decade1, with highly uncertain impacts on regional and global tropospheric ozone levels. According to ozonesonde measurements2, 3, tropospheric ozone concentrations at two

An Exponential Regulator for Rapidity Divergences

Energy Technology Data Exchange (ETDEWEB)

Li, Ye [Fermilab; Neill, Duff [MIT, Cambridge, CTP; Zhu, Hua Xing [MIT, Cambridge, CTP

2016-04-01

Finding an efficient and compelling regularization of soft and collinear degrees of freedom at the same invariant mass scale, but separated in rapidity is a persistent problem in high-energy factorization. In the course of a calculation, one encounters divergences unregulated by dimensional regularization, often called rapidity divergences. Once regulated, a general framework exists for their renormalization, the rapidity renormalization group (RRG), leading to fully resummed calculations of transverse momentum (to the jet axis) sensitive quantities. We examine how this regularization can be implemented via a multi-differential factorization of the soft-collinear phase-space, leading to an (in principle) alternative non-perturbative regularization of rapidity divergences. As an example, we examine the fully-differential factorization of a color singlet's momentum spectrum in a hadron-hadron collision at threshold. We show how this factorization acts as a mother theory to both traditional threshold and transverse momentum resummation, recovering the classical results for both resummations. Examining the refactorization of the transverse momentum beam functions in the threshold region, we show that one can directly calculate the rapidity renormalized function, while shedding light on the structure of joint resummation. Finally, we show how using modern bootstrap techniques, the transverse momentum spectrum is determined by an expansion about the threshold factorization, leading to a viable higher loop scheme for calculating the relevant anomalous dimensions for the transverse momentum spectrum.

THE LATITUDINAL COMPENSATION HYPOTHESIS: GROWTH DATA AND A MODEL OF LATITUDINAL GROWTH DIFFERENTIATION BASED UPON ENERGY BUDGETS. I. INTERSPECIFIC COMPARISON OF OPHRYOTROCHA (POLYCHAETA: DORVILLEIDAE).

Science.gov (United States)

Levinton, Jeffrey S

1983-12-01

A northern (North Carolina) sibling species of Ophryotrocha grew more rapidly than a southern sibling species (Florida); this presumed advantage, however, diminished to zero as temperature increased from 15 to 30°C. Survival of the northern sibling species was low at 30°C. The differential response probably had a genetic basis since both species had been reared for 2-3 generations under the same conditions. The effect lasted in laboratory populations reared for a year in the laboratory at 25°C (ca. 10 generations). My results are consistent with a graphical model that suggests an evolutionary shift of metabolism-temperature curves and feeding efficiency curves for the two sibling species. These shifts predict a changing advantage of growth of one species relative to the other as temperature increases.

Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures

Energy Technology Data Exchange (ETDEWEB)

Ganesh, P., E-mail: ganesh@rrcat.gov.in [Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology, Indore (MP) 452013 (India); Kaul, R.; Paul, C.P. [Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology, Indore (MP) 452013 (India); Tiwari, Pragya; Rai, S.K. [Indus Synchrotrons Utilization Division, Raja Ramanna Centre for Advanced Technology, Indore (MP) 452013 (India); Prasad, R.C. [Metallurgy and Materials Science Department, IIT Bombay, Mumbai 400 076 (India); Kukreja, L.M. [Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology, Indore (MP) 452013 (India)

2010-11-15

Research highlights: {yields} Mechanical test results of Laser rapid manufactured (LRM) Inconel 625 are reported. {yields} 12 and 25 mm thick CT specimens of LRM Inconel 625 showed similar fatigue crack growth. {yields} Stage II crack growth behavior is observed in the investigated {Delta}K range. {yields} Fracture toughness testing by J-integral method yielded J{sub 1c} of about 200-250 kJ/m{sup 2}. - Abstract: Fatigue crack growth and fracture toughness characteristics of laser rapid manufactured (LRMed) Inconel 625 compact tension specimens of thickness 12 and 25 mm were investigated. Fatigue crack propagation in all the specimens investigated in the stress intensity range ({Delta}K) of 14-38 MPa{radical}m, exhibited stage II crack growth in Paris' regime with nearly same slopes of crack growth per cycle versus {Delta}K plot. Fatigue crack growth rates in the LRMed specimens of present study were found to be lower than the reported values for wrought Inconel 625 in the {Delta}K range of 14-24 MPa{radical}m and above this range they tended to coincide. X-ray diffraction patterns of the fractured surfaces revealed that the crack propagated along the growth direction of the specimens which was predominantly along the (1 1 1) plane. The fracture toughness values (J{sub 0.2}) for LRMed Inconel 625 specimens were found to be in the range of about 200-255 kJ/m{sup 2}. The LRMed specimens exhibited stable crack growth during the J-integral test.

Controllable mineral coatings on scaffolds as carriers for growth factor release for bone tissue engineering

Science.gov (United States)

Saurez-Gonzalez, Darilis

The work presented in this document, focused on the development and characterization of mineral coatings on scaffold materials to serve as templates for growth factor binding and release. Mineral coatings were formed using a biomimetic approach that consisted in the incubation of scaffolds in modified simulated body fluids (mSBF). To modulate the properties of the mineral coating, which we hypothesized would dictate growth factor release, we used carbonate (HCO3) concentration in mSBF of 4.2 mM, 25mM, and 100mM. Analysis of the mineral coatings formed using scanning electron microscopy indicated growth of a continuous layer of mineral with different morphologies. X-ray diffraction analysis showed peaks associated with hydroxyapatite. FTIR data confirmed the substitution of HCO3 in the mineral. As the extent of HCO3 substitution increased, the coating exhibited more rapid dissolution kinetics in an environment deficient in calcium and phosphate. The mineral coatings provided an effective mechanism for bioactive growth factor binding and release. Peptide versions of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP2) were bound with efficiencies up to 90% to mineral-coated PCL scaffolds. Recombinant human vascular endothelial growth factor (rhVEGF) also bound to mineral coated scaffolds with lower efficiency (20%) and released with faster release kinetics compared to peptides growth factor. Released rhVEGF induced human umbilical vein endothelial cell (HUVEC) proliferation in vitro and enhanced blood vessel formation in vivo in an intramuscular sheep model. In addition to the use the mineral coatings for single growth factor release, we expanded the concept and bound both an angiogenic (rhVEGF) and osteogenic (mBMP2) growth factor by a simple double dipping process. Sustained release of both growth factors was demonstrated for over 60 days. Released rhVEGF enhanced blood vessel formation in vivo in sheep and its biological activity was

The impact of entrepreneurial capital and rapidly growing firms: the Canadian example

DEFF Research Database (Denmark)

Keen, Christian; Etemad, Hamid

2011-01-01

. It provides empirical evidence from small, young, high-growth enterprises that entrepreneurial capital contributes significantly to their growth through such augmentation. As emerging industries and regions face similar challenges as those of high and rapidly-growing smaller enterprises in increasingly more......World-class competitiveness is no longer an option for firms seeking growth and survival in the increasingly competitive, dynamic and interconnected world. This paper expands on the concept of entrepreneurial capital and formalizes it as a catalyst that augments other productive factors...

Effectiveness of Commercial Biofertilizer on Fertilization Efficiency in Ultisols for the Growth and Yield of Caisim

Directory of Open Access Journals (Sweden)

Ea Kosman Anwar

2011-09-01

Full Text Available The effectiveness of Commercial Biofertilizer 1 (CBF1 on the growth and yield of caisim (Brassica sp. was examined in the greenhouse of Indonesian Soil Research Institute in Bogor. The completely randomized design (CRD was performed to examine the effects of Commercial Biofertilizer 1 (CBF1 on Fertilization Efficiency in Ultisols. The treatments were consists of 10 combinations between NPK-recommendation (NPK-rec and CBF1, with six replications. The experiment was conducted from August to October 2009. The result showed that CBF I increased the yields of caisim when combining by fertilizer NPK-rec, while giving CBF1 alone did not significantly increases yields compare to control (without fertilizer. Giving ¾ dosage NPK-rec. + CBF1 had RAE value 163%, indicating the effectiveness of CBF1 was optimum, that it reduce the need of NPK fertilizer by 25% by providing the increasing of yield 63% compared to NPK rec. The higher the level of NPK-rec. the lower the efficiency of fertilization. CBF1 had given effectives on yields when it was combined by inorganic fertilizer. However, when it was not combined with inorganic fertilizers, it would harm plants and decreased the soil nutrients. The influence of biofertilizer in plants were predictable unpredictable, while the influent of inorganic fertilizers were predictable.

Cross-scale interactions affect tree growth and intrinsic water use efficiency and highlight the importance of spatial context in managing forests under global change

Science.gov (United States)

Kenneth J. Ruzicka; Klaus J. Puettmann; J. Renée Brooks

2017-01-01

Summary1. We investigated the potential of cross-scale interactions to affect the outcome of density reduction in a large-scale silvicultural experiment to better understand options for managing forests under climate change. 2. We measured tree growth and intrinsic water-use efficiency (iWUE) based on stable carbon isotopes (δ...

Safe communities in China as a strategy for injury prevention and safety promotion programmes in the era of rapid economic growth.

Science.gov (United States)

Wang, Shu-Mei; Dalal, Koustuv

2013-02-01

Due to its rapid economic development, China is facing a huge health, social, and economic burden resulting from injuries. The study's objective was to examine Safe Communities in China as a strategy for injury prevention and safety promotion programmes in the era of rapid economic growth. Literature searches in English and Chinese, which included grey literature, were performed on the Chinese Journal Full-text Search System and Medline, using the words "Safe Community", "injury", "economics", and "prevention". The results showed that the existing 35 recognized members of the International Safe Community Network have not placed due emphasis on suicide prevention, which is one of the leading problems in both rural and urban China. A few groups, such as children, the elderly, cyclists, and pedestrians, have received due emphasis, while other vulnerable groups, such as migrant workers, motorcyclists, students, players, and farmers have not received the necessary attention from the Safe Community perspective. As the evidence describes, Safe Communities in China can be a very effective strategy for injury prevention, but four aspects need to be strengthened in the future: (1) establish and strengthen the policy and regulations in terms of injury prevention at the national level; (2) create a system to involve professional organizations and personnel in projects; (3) consider the economic development status of different parts of China; and (4) intentional injury prevention should receive greater attention.

Rapid differentiation of Staphylococcus aureus, Staphylococcus epidermidis and other coagulase-negative staphylococci and meticillin susceptibility testing directly from growth-positive blood cultures by multiplex real-time PCR.

Science.gov (United States)