Note: Rotaphone, a new self-calibrated six-degree-of-freedom seismic sensor

Science.gov (United States)

Brokešová, Johana; Málek, Jiří; Evans, John R.

2012-01-01

We have developed and tested (calibration, linearity, and cross-axis errors) a new six-degree-of-freedom mechanical seismic sensor for collocated measurements of three translational and three rotational ground motion velocity components. The device consists of standard geophones arranged in parallel pairs to detect spatial gradients. The instrument operates in a high-frequency range (above the natural frequency of the geophones, 4.5 Hz). Its theoretical sensitivity limit in this range is 10(-9) m/s in ground velocity and 10(-9) rad/s in rotation rate. Small size and weight, and easy installation and maintenance make the instrument useful for local-earthquake recording and seismic prospecting.

Gamma-ray astronomy in the medium energy (10-50 MeV) range

International Nuclear Information System (INIS)

Kniffen, D.A.; Bertsch, D.L.; Palmeira, R.A.R.; Rao, K.R.

1977-01-01

Gamma-ray astronomy in the medium energy (10-50 MeV) range can provide unique information with which to study many astrophysical problems. Observations in the 10-50 MeV range provide the cleanest window with which to view the isotropic diffuse component of the radiation and to study the possible cosmological implications of the spectrum. For the study of compact sources, this is the important region between the X-ray sky and the vastly different γ-ray sky seen by SAS-2 and COS-B. To understand the implications of medium energy γ-ray astronomy to the study of the galactic diffuse γ-radiation, the model developed to explain the high energy γ-ray observations of SAS-2 is extended to the medium energy range. This work illustrates the importance of medium energy γ-ray astronomy for studying the electromagnetic component of the galactic cosmic rays. To observe the medium energy component of the intense galactic center γ-ray emission, two balloon flights of a medium energy γ-ray spark chamber telescope were flown in Brazil in 1975. These results indicate the emission is higher than previously thought and above the predictions of the theoretical model

Study on bubble properties and disorder degree in ion-implanted ferrite-garnet films

International Nuclear Information System (INIS)

Kulikauskas, V.S.; Markyalis, A.V.; Pranyavichyus, L.I.

1981-01-01

The disorder degree in crystalline garnet films of (BiTm) 3 (FeGa) 5 O 2 composition arising due to ion implantation was studied by the proton backscattering method. The epitaxial films were grown on nonmagnetic substrates of gallium-gadolinium garnets cutted in the (111) plane. Neon ions with 100 keV energy were implanted in the dose range of 6x10 13 -2x10 14 cm -2 . The initial energy of the backscattered protons was 450 keV. The defect maximum was located at the depth of approximately 0.15 μk. The amorphization degeee at the defect maximum was calculated at different radiation doses. At 10 14 and 2x10 14 cm -2 doses the amorphization degree was the same and was equal to 0.8. The bubble parameters were studied. It is obtained that the threshold value of the neon ion dose corresponds to the minimum interval of the collapse fields ( [ru

YAOPBM-II: extension to higher degrees and to shorter time series

Energy Technology Data Exchange (ETDEWEB)

Korzennik, S G [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States)], E-mail: skorzennik@cfa.harvard.edu

2008-10-15

In 2005, I presented a new fitting methodology (Yet AnOther Peak Bagging Method -YAOPBM), derived for very-long time series (2088-day-long) and applied it to low degree modes, {iota} {<=} 25. That very-long time series was also sub-divided into shorter segments (728-day-long) that were each fitted over the same range of degrees, to estimate changes with solar activity levels. I present here the extension of this method in several 'directions': a) to substantially higher degrees ({iota} {<=} 125); b) to shorter time series (364- and 182-day-long); and c) to additional 728-day-long segments, covering now some 10 years of observations. I discuss issues with the fitting, namely the leakage matrix, and the f- and p1 mode at very low frequencies, and I present some of the characteristics of the observed temporal changes.

Patient Self-Assessed Passive Range of Motion of the Knee Cannot Replace Health Professional Measurements

DEFF Research Database (Denmark)

Borgbjerg, Jens; Madsen, Frank; Odgaard, Anders

2017-01-01

The purpose of this study was to investigate whether patients can accurately self-assess their knee passive range of motion (PROM). A picture-based questionnaire for patient self-assessment of knee PROM was developed and posted to patients. The self-assessed PROM from 58 patients was compared...... (≥ 10-degree flexion contracture). Surgeon- and patient-assessed knee PROM showed a mean difference (95% limits of agreement) of -2.1 degrees (-42.5 to 38.3 degrees) for flexion and -8.1 degrees (-28.8 to 12.7 degrees) for extension. The sensitivity of patient self-assessed PROM in identifying knee...

Comparison of two-stage thermophilic (68 degrees C/55 degrees C) anaerobic digestion with one-stage thermophilic (55 degrees C) digestion of cattle manure

DEFF Research Database (Denmark)

Nielsen, H.B.; Mladenovska, Zuzana; Westermann, Peter

2004-01-01

A two-stage 68degreesC/55degreesC anaerobic degradation process for treatment of cattle manure was studied. In batch experiments, an increase of the specific methane yield, ranging from 24% to 56%, was obtained when cattle manure and its fractions (fibers and liquid) were pretreated at 68degrees......, was compared with a conventional single-stage reactor running at 55degreesC with 15-days HRT. When an organic loading of 3 g volatile solids (VS) per liter per day was applied, the two-stage setup had a 6% to 8% higher specific methane yield and a 9% more effective VS-removal than the conventional single......-stage reactor. The 68degreesC reactor generated 7% to 9% of the total amount of methane of the two-stage system and maintained a volatile fatty acids (VFA) concentration of 4.0 to 4.4 g acetate per liter. Population size and activity of aceticlastic methanogens, syntrophic bacteria, and hydrolytic...

The perceived barriers and facilitators in completing a Master’s degree in Physiotherapy

Directory of Open Access Journals (Sweden)

Nicolette Comley-White

2018-05-01

Full Text Available Background: Participating in postgraduate study is daunting and as yet there is a dearth of literature on what students’ experiences are when obtaining their Master’s degree in Physiotherapy. Objectives: The aim of this study was to gain insight into the perceived barriers and facilitators in completing a Master’s degree in Physiotherapy. Method: Semi-structured, in-depth interviews were conducted with 10 physiotherapists who had completed a Master’s degree in Physiotherapy from a university in South Africa, representative of coursework and dissertation Master’s degrees, completed within the stipulated time period as well as taking longer to complete the degree. The topics covered a range of speciality areas. The interviews were transcribed, sent for member checking and analysed thematically. Results: Within 10 interviews data saturation was reached. Two themes were identified: research environment and support, both of which were seen as either a facilitator or a barrier, depending on the participant. The theme of research environment was divided into categories of workplace and data collection. The second theme, support, was also seen as either a barrier or a facilitator. This theme encapsulated the categories of supervisor support, workplace support and a personal support network. Conclusion: The research environment and support are two major factors that can influence the experience of obtaining a master’s degree in physiotherapy, both positively and negatively. Clinical implications: With increasing numbers of physiotherapists obtaining postgraduate degrees, universities need to facilitate the process of obtaining the degree, which will ensure more physiotherapists with postgraduate degrees, thereby strengthening the profession.

Degree-degree correlations in random graphs with heavy-tailed degrees

NARCIS (Netherlands)

Hofstad, van der R.W.; Litvak, N.

2014-01-01

Mixing patterns in large self-organizing networks, such as the Internet, the World Wide Web, social, and biological networks are often characterized by degree-degree dependencies between neighboring nodes. In assortative networks, the degree-degree dependencies are positive (nodes with similar

Degree-Degree Dependencies in Random Graphs with Heavy-Tailed Degrees

NARCIS (Netherlands)

van der Hofstad, Remco; Litvak, Nelly

2014-01-01

Mixing patterns in large self-organizing networks, such as the Internet, the World Wide Web, social, and biological networks are often characterized by degree-degree dependencies between neighboring nodes. In assortative networks, the degree-degree dependencies are positive (nodes with similar

Determination of flavanol and procyanidin (by degree of polymerization 1-10) content of chocolate, cocoa liquors, powder(s), and cocoa flavanol extracts by normal phase high-performance liquid chromatography: collaborative study.

Science.gov (United States)

Robbins, Rebecca J; Leonczak, Jadwiga; Li, Julia; Johnson, J Christopher; Collins, Tom; Kwik-Uribe, Catherine; Schmitz, Harold H

2012-01-01

An international collaborative study was conducted on an HPLC method with fluorescent detection (FLD) for the determination of flavanols and procyanidins in materials containing chocolate and cocoa. The sum of the oligomeric fractions with degree of polymerization 1-10 was the determined content value. Sample materials included dark and milk chocolates, cocoa powder, cocoa liquors, and cocoa extracts. The content ranged from approximately 2 to 500 mg/g (defatted basis). Thirteen laboratories representing commercial, industrial, and academic institutions in six countries participated in the study. Fourteen samples were sent as blind duplicates to the collaborators. Results from 12 laboratories yielded repeatability relative standard deviation (RSDr) values that were below 10% for all materials analyzed, ranging from 4.17 to 9.61%. The reproducibility relative standard deviation (RSD(R)) values ranged from 5.03 to 12.9% for samples containing 8.07 to 484.7 mg/g. In one sample containing a low content of flavanols and procyanidins (approximately 2 mg/g), the RSD(R) was 17.68%. Based on these results, the method is recommended for Official First Action for the determination of flavanols and procyanidins in chocolate, cocoa liquors, powder(s), and cocoa extracts.

A Multi-Element Ultrasonic Ranging Array

Science.gov (United States)

1985-01-01

of local tehiperature, in degrees Rankine (degrees Farenheit + 460 degrees). At 70 degrees F: c = 49.018 V ^60 + 70 = 1128 ft/sec At 30 degrees F...the RS-232. When acknowledged, the ranges sre sequentially dumped out the serial interface and placed by the Scheduler in Page Zero indexed storage...served, such as collision avoidance or object tracking, where absolute accuracies are not as important as is relative information

10.23  Mcps laser pseudo-code ranging system with 0.33  mm (1σ) pseudo-range measurement precision.

Science.gov (United States)

Yu, Xiaonan; Tong, Shoufeng; Zhang, Lei; Dong, Yan; Zhao, Xin; Qiao, Yue

2017-07-01

The inter-satellite laser link is the backbone of the next inter-satellite information network, and ranging and communication are the main functions of the inter-satellite laser link. This study focuses on the inter-satellite laser ranging based on the pseudo-code correlation technology. In this paper, several typical laser-ranging methods have been compared and we determined that the laser pseudo-code ranging architecture is more suitable for the inter-satellite laser communication link. The pseudo-code ranging system is easy to combine with a digital communication system, and we used it to calculate integer ambiguity by modulating the time information. The main challenge of the ranging system is range precision, which is the main focus of this paper. First, the framework of the pseudo-code ranging system is introduced; the ranging architecture of dual one-way ranging is used to eliminate the clock error between the two transceivers, and then the uncertainty of the phase detector is analyzed. In the analysis, the carrier to noise ratio and the ranging code rate are constrained by the laser communication link margin and the electronic hardware limitation. Therefore, the relationship between the sampling depth and the phase detector uncertainty is verified. A series of optical fiber channel laser pseudo-code ranging experiments demonstrated the effects of sampling depth on the ranging precision. By adjusting the depth of storage, such as the depth of 1.6 Mb, we obtained a pseudo-range measurement precision of 0.33 mm (1σ), which is equivalent to 0.0001 times code subdivision of 10.23 Mcps pseudo-code. This paper has achieved high precision in a pseudo-range measurements, which is the foundation of the inter-satellite laser link.

Measurement and description of three-dimensional shoulder range of motion with degrees of freedom interactions.

Science.gov (United States)

Haering, Diane; Raison, Maxime; Begon, Mickael

2014-08-01

The shoulder is the most mobile joint of the human body due to bony constraint scarcity and soft tissue function unlocking several degrees of freedom (DOF). Clinical evaluation of the shoulder range of motion (RoM) is often limited to a few monoplanar measurements where each DOF varies independently. The main objective of this study was to provide a method and its experimental approach to assess shoulder 3D RoM with DOF interactions. Sixteen participants performed four series of active arm movements with maximal amplitude consisting in (1) elevations with fixed arm axial rotations (elevation series), (2) axial rotations at different elevations (rotation series), both in five planes of elevation, (3) free arm movements with the instruction to fill the largest volume in space while varying hand orientation (random series), and (4) a combination of elevation and rotation series (overall series). A motion analysis system combined with an upper limb kinematic model was used to estimate the 3D joint kinematics. Thoracohumeral Euler angles with correction were chosen to represent rotations. The angle-time-histories were treated altogether to analyze their 3D interaction. Then, all 3D angular poses were included into a nonconvex hull representing the RoM space accounting for DOF interactions. The effect of series of movements (n = 4) on RoM volumes was tested with a one-way repeated-measures ANOVA followed by Bonferroni posthoc analysis. A normalized 3D RoM space was defined by including 3D poses common to a maximal number of participants into a hull of average volume. A significant effect of the series of movements (p measured the largest RoM with an average volume of 3.46 ± 0.89 million cubic degrees. The main difference between the series of movements was due to axial rotation. A normalized RoM hull with average volume was found by encompassing arm poses common to more than 50% of the participants. In general, the results confirmed and characterized the complex 3D

Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure

International Nuclear Information System (INIS)

Feng, X.; Garboczi, E.J.; Bentz, D.P.; Stutzman, P.E.; Mason, T.O.

2004-01-01

A scanning electron microscope (SEM) point-counting technique was employed to study the hydration of plain portland and blended cement pastes containing fly ash or slag. For plain portland cement pastes, the results for the degree of cement hydration obtained by the SEM point-counting technique were consistent with the results from the traditional loss-on-ignition (LOI) of nonevaporable water-content measurements; agreement was within ±10%. The standard deviation in the determination of the degree of cement hydration via point counting ranged from ±1.5% to ±1.8% (one operator, one sample). For the blended cement pastes, it is the first time that the degree of hydration of cement in blended systems has been studied directly. The standard deviation for the degree of hydration of cement in the blended cement pastes ranged from ±1.4% to ±2.2%. Additionally, the degrees of reaction of the mineral admixtures (MAs) were also measured. The standard deviation for the degree of fly ash reaction was ±4.6% to ±5.0% and ±3.6% to ±4.3% for slag. All of the analyses suggest that the SEM point-counting technique can be a reliable and effective analysis tool for use in studies of the hydration of blended cement pastes

Nickel-titanium alloys: stress-related temperature transitional range.

Science.gov (United States)

Santoro, M; Beshers, D N

2000-12-01

The inducement of mechanical stress within nickel-titanium wires can influence the transitional temperature range of the alloy and therefore the expression of the superelastic properties. An analogous variation of the transitional temperature range may be expected during orthodontic therapy, when the archwires are engaged into the brackets. To investigate this possibility, samples of currently used orthodontic nickel-titanium wires (Sentalloy, GAC; Copper Ni-Ti superelastic at 27 degrees C, 35 degrees C, 40 degrees C, Ormco; Nitinol Heat-Activated, 3M-Unitek) were subjected to temperature cycles ranging between 4 degrees C and 60 degrees C. The wires were mounted in a plexiglass loading device designed to simulate clinical situations of minimum and severe dental crowding. Electrical resistivity was used to monitor the phase transformations. The data were analyzed with paired t tests. The results confirmed the presence of displacements of the transitional temperature ranges toward higher temperatures when stress was induced. Because nickel-titanium wires are most commonly used during the aligning stage in cases of severe dental crowding, particular attention was given to the performance of the orthodontic wires under maximum loading. An alloy with a stress-related transitional temperature range corresponding to the fluctuations of the oral temperature should express superelastic properties more consistently than others. According to our results, Copper Ni-Ti 27 degrees C and Nitinol Heat-Activated wires may be considered suitable alloys for the alignment stage.

Influence of Ionization Degrees on the Evolutions of Charged Particles in Atmospheric Plasma at Low Altitude

International Nuclear Information System (INIS)

Pang Xuexia; Deng Zechao; Jia Pengying; Liang Weihua; Li Xia

2012-01-01

A zero-dimensional model which includes 56 species of reactants and 427 reactions is used to study the behavior of charged particles in atmospheric plasmas with different ionization degrees at low altitude (near 0 km). The constant coefficient nonlinear equations are solved by using the Quasi-steady-state approximation method. The electron lifetimes are obtained for afterglow plasma with different initial values, and the temporal evolutions of the main charged species are presented, which are dominant in reaction processes. The results show that the electron number density decays quickly. The lifetimes of electrons are shortened by about two orders with increasing ionization degree. Electrons then attach to neutral particles and produce negative ions. When the initial electron densities are in the range of 10 10 ∼ 10 14 cm −3 , the negative ions have sufficiently high densities and long lifetimes for air purification, disinfection and sterilization. Electrons, O 2 − , O 4 − , CO 4 − and CO 3 − are the dominant negative species when the initial electron density n e0 ≤ 10 13 cm −3 , and only electrons and CO 3 − are left when n e0 ≥ 10 15 cm −3 · N + 2 , N + 4 and O + 2 are dominant in the positive charges for any ionization degree. Other positive species, such as O + 4 , N + 3 , NO + , NO + 2 , Ar + 2 and H 3 O + ·H 2 O, are dominant only for a certain ionization degree and in a certain period. (low temperature plasma)

The influence of interstitial impurities on temperature ranges of deuterium retention in austenitic stainless steel 18Cr10NiTi

International Nuclear Information System (INIS)

Neklyudov, I.M.; Morozov, O.M.; Kulish, V.G.; Zhurba, V.I.; Galytsky, A.G.; Piatenko, E.V.

2009-01-01

The influence of nitrogen, oxygen and helium on the temperature range of deuterium retention in 18Cr10NiTi stainless steel (of AISI304L type) has been investigated. It is demonstrated that the introduction of oxygen, nitrogen or helium into 18Cr10NiTi steel extends the upper limit in the high-temperature range of deuterium retention. It has been found that for 18Cr10NiTi stainless steel, pre-irradiated with helium ions, the increase in the temperature range of deuterium retention occurs in steps: on attainment of helium concentration of ∼0.5 at.% He the temperature range increases by ∼100 K, and on attainment of helium concentration of ∼2.5 at.% He the temperature range increases by ∼350 K. The introduction of oxygen into 18Cr10NiTi stainless steel results in the increase of the temperature range of deuterium retention in the direction of rise in temperature. In the deuterium thermodesorption spectrum, this manifests itself by the occurrence of an additional low-amplitude peak with the maximum temperature T m ∼ 560 K. The introduction of nitric impurity into 18Cr10NiTi stainless steel results in the extension of the temperature range of deuterium retention towards higher temperatures.

Quasi-monoenergetic neutron energy spectra for 246 and 389 MeV (7)Li(p,n) reactions at angles from 0 degrees to 300 degrees

CERN Document Server

Iwamoto, Y; Nakamura, T; Nakashima, H; Mares, V; Itoga, T; Matsumoto, T; Nakane, Y; Feldbaumer, E; Jaegerhofer, L; Pioch, C; Tamii, A; Satoh, D; Masuda, A; Sato, T; Iwase, H; Yashima, H; Nishiyama, J; Hagiwara, M; Hatanaka, K; Sakamoto, Y

2011-01-01

The authors measured the neutron energy spectra of a quasi-monoenergetic (7)Li(p,n) neutron source with 246 and 389 MeV protons set at seven angles (0 degrees, 2.5 degrees, 5 degrees, 10 degrees, 15 degrees, 20 degrees and 30 degrees), using a time-of-flight (TOF) method employing organic scintillators NE213 at the Research Center for Nuclear Physics (RCNP) of Osaka University. The energy spectra of the source neutrons were precisely deduced down to 2 MeV at 0 degrees and 10 MeV at other angles. The cross-sections of the peak neutron production reaction at 0 degrees were on the 35-40 mb line of other experimental data, and the peak neutron angular distribution agreed well with the Taddeucci formula. Neutron energy spectra below 100 MeV at all angles were comparable, but the shapes of the continuum above 150 MeV changed considerably with the angle. In order to consider the correction required to derive the response in the peak region from the measured total response for high-energy neutron monitors such as DAR...

Custom-fit polymeric membrane dressing masks in the treatment of second degree facial burns.

Science.gov (United States)

Weissman, Oren; Hundeshagen, Gabriel; Harats, Moti; Farber, Nimrod; Millet, Eran; Winkler, Eyal; Zilinsky, Isaac; Haik, Josef

2013-09-01

Second degree facial burns usually impart high wound site pain levels and patient discomfort due to the abundance of facial sensory innervation, as well as the development of edema and inflammation that accompany wound healing. Frequent changing of adherent dressings causes additional procedural pain and may prolong healing due to recurring damage to the wound bed. We applied face masks, made on-site from a drug free polymeric membrane dressing, to 8 patients with superficial and deep 2nd degree facial burns. Time to full re-epithlialization was recorded during treatment. Pain, overall comfort, and result satisfaction were evaluated using a questionnaire (10-point Likert scales. From 1=minimum to 10=maximum) on follow-up (mean follow up 14.4 months, range 9-18). These results were compared to a historical cohort of patients with facial burns that were treated with an antibiotic ointment. Results showed mean re-epithelialization time of 6.5 days (as compared to 8.5 days in the cohort group), low pain ratings (mean: 2.6; range: 4.7 in the control group), mixed comfort levels (mean: 4.7/10; 4 in the control group) and high result satisfaction (mean: 7.8; 6.2 in the control group). Nursing staff described pain-free dressing changes and positively noted non-adherence and high absorbance capacity of the polymer, necessitating less dressing changes. Inflammation was contained to the actual site of injury. No complications in terms of infection or allergic reaction were observed. Overall, the polymeric membrane facial dressing seems to be a promising means of reducing pain and ensuring uninterrupted wound healing in 2nd degree facial burns. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Effects of chain length, chlorination degree, and structure on the octanol-water partition coefficients of polychlorinated n-alkanes.

Science.gov (United States)

Hilger, Bettina; Fromme, Hermann; Völkel, Wolfgang; Coelhan, Mehmet

2011-04-01

Log octanol-water partition coefficients (log Kow) of 40 synthesized polychlorinated n-alkanes (PCAs) with different chlorination degrees were determined using reversed-phase high performance liquid chromatography (RP-HPLC). In addition, log Kow values of a technical mixture namely Cereclor 63L as well as 15 individual in house synthesized C10, C11, and C12 chloroalkanes with known chlorine positions were estimated. Based on these results, the effects of chain length, chlorination degree, and structure were explored. The estimated log Kow values ranged from 4.10 (polychlorinated n-decanes with 50.2% chlorine content) to 11.34 (polychlorinated n-octacosanes with 54.8% chlorine content) for PCAs and from 3.82 (1,2,5,6,9,10-hexachlorodecane) to 7.75 (1,1,1,3,9,11,11,11-octachlorododecane) for the individual chloroalkanes studied. The results showed that log Kow value was influenced linearly at a given chlorine content by chain length, while a polynominal effect was observed in dependence on the chlorination degree of an alkane chain. Chlorine substitution pattern influenced markedly the log Kow value of chloroalkanes.

THE FIRST Hi-GAL OBSERVATIONS OF THE OUTER GALAXY: A LOOK AT STAR FORMATION IN THE THIRD GALACTIC QUADRANT IN THE LONGITUDE RANGE 216. Degree-Sign 5 {approx}< l {approx}< 225. Degree-Sign 5

Energy Technology Data Exchange (ETDEWEB)

Elia, D.; Molinari, S.; Schisano, E.; Pestalozzi, M.; Benedettini, M.; Di Giorgio, A. M.; Pezzuto, S.; Rygl, K. L. J. [Istituto di Astrofisica e Planetologia Spaziali-INAF, Via Fosso del Cavaliere 100, I-00133 Roma (Italy); Fukui, Y.; Hayakawa, T.; Yamamoto, H. [Department of Physics, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8602 (Japan); Olmi, L. [Osservatorio Astrofisico di Arcetri-INAF, Largo E. Fermi 5, I-50125 Firenze (Italy); Veneziani, M. [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); Schneider, N.; Piazzo, L. [IRFU/SAp CEA/DSM, Laboratoire AIM CNRS, Universit Paris Diderot, F-91191 Gif-sur-Yvette (France); Ikhenaode, D. [DIET-Dipartimento di Ingegneria dell' Informazione, Elettronica e Telecomunicazioni, Universita di Roma La Sapienza, via Eudossina 18, I-00184 Roma (Italy); Mizuno, A. [Solar-Terrestrial Environment Laboratory, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Onishi, T. [Department of Physical Science, Osaka Prefecture University, Sakai, Osaka 599-8531 (Japan); Polychroni, D. [Department of Astrophysics, Astronomy and Mechanics, Faculty of Physics, University of Athens, Panepistimiopolis, 15784 Zografos, Athens (Greece); Maruccia, Y., E-mail: davide.elia@iaps.inaf.it [Dipartimento di Matematica e Fisica, Universita del Salento, CP 193, I-73100 Lecce (Italy)

2013-07-20

We present the first Herschel PACS and SPIRE photometric observations in a portion of the outer Galaxy (216. Degree-Sign 5 {approx}< l {approx}< 225. Degree-Sign 5 and -2 Degree-Sign {approx}< b {approx}< 0 Degree-Sign ) as a part of the Hi-GAL survey. The maps between 70 and 500 {mu}m, the derived column density and temperature maps, and the compact source catalog are presented. NANTEN CO(1-0) line observations are used to derive cloud kinematics and distances so that we can estimate distance-dependent physical parameters of the compact sources (cores and clumps) having a reliable spectral energy distribution that we separate into 255 proto-stellar and 688 starless sources. Both typologies are found in association with all the distance components observed in the field, up to {approx}5.8 kpc, testifying to the presence of star formation beyond the Perseus arm at these longitudes. Selecting the starless gravitationally bound sources, we identify 590 pre-stellar candidates. Several sources of both proto- and pre-stellar nature are found to exceed the minimum requirement for being compatible with massive star formation based on the mass-radius relation. For the pre-stellar sources belonging to the Local arm (d {approx}< 1.5 kpc) we study the mass function whose high-mass end shows a power law N(log M){proportional_to}M {sup -1.0{+-}0.2}. Finally, we use a luminosity versus mass diagram to infer the evolutionary status of the sources, finding that most of the proto-stellar sources are in the early accretion phase (with some cases compatible with a Class I stage), while for pre-stellar sources, in general, accretion has not yet started.

Photodissociation of HCN and HNC isomers in the 7-10 eV energy range

Energy Technology Data Exchange (ETDEWEB)

Chenel, Aurelie; Roncero, Octavio, E-mail: octavio.roncero@csic.es [Instituto de Física Fundamental (IFF-CSIC), C.S.I.C., Serrano 123, 28006 Madrid (Spain); Aguado, Alfredo [Departamento de Química Física Aplicada (UAM), Unidad Asociada a IFF-CSIC, Facultad de Ciencias Módulo 14, Universidad Autónoma de Madrid, 28049 Madrid (Spain); Agúndez, Marcelino; Cernicharo, José [Instituto de Ciencia de Materiales de Madrid, CSIC, C/ Sor Juana Inés de la Cruz 3, 28049 Cantoblanco (Spain)

2016-04-14

The ultraviolet photoabsorption spectra of the HCN and HNC isomers have been simulated in the 7-10 eV photon energy range. For this purpose, the three-dimensional adiabatic potential energy surfaces of the 7 lowest electronic states, and the corresponding transition dipole moments, have been calculated, at multireference configuration interaction level. The spectra are calculated with a quantum wave packet method on these adiabatic potential energy surfaces. The spectra for the 3 lower excited states, the dissociative electronic states, correspond essentially to predissociation peaks, most of them through tunneling on the same adiabatic state. The 3 higher electronic states are bound, hereafter electronic bound states, and their spectra consist of delta lines, in the adiabatic approximation. The radiative lifetime towards the ground electronic states of these bound states has been calculated, being longer than 10 ns in all cases, much longer that the characteristic predissociation lifetimes. The spectra of HCN is compared with the available experimental and previous theoretical simulations, while in the case of HNC there are no previous studies to our knowledge. The spectrum for HNC is considerably more intense than that of HCN in the 7-10 eV photon energy range, which points to a higher photodissociation rate for HNC, compared to HCN, in astrophysical environments illuminated by ultraviolet radiation.

Bridge Network for Measuring Very Small Impedances from 4.2 to 300 degrees K with a Null-Detector Sensitivity of 10-11 Volt

DEFF Research Database (Denmark)

Bak, Christen Kjeldahl; Dalsgaard, Erik

1967-01-01

An ac measuring technique devised primarily for measuring galvanomagnetic effects in metals is presented. The instrument may, however, be useful whenever it is desired to measure and record continuously impedances in the range 10−3 to 10−8 Omega. The sample assembly is disscussed in some detail....... Measurements with the bridge show that in the temperature range 300°K to 4.2°K the noise level changes from 30×10−11 V to 10−11 V without any zero shift, and as a result the lower limit for the impedance range changes from 10−6 Omega to less than 5×10−8 Omega. ©1967 The American Institute of Physics...

Interdiffusion studies on hot rolled U-10Mo/AA1050

Energy Technology Data Exchange (ETDEWEB)

Saliba-Silva, A.M.; Martins, I.C.; Carvalho, E.U.; Durazzo, M.; Riella, H.G. [Instituto de Pesquisas Energeticas e Nucleares (CCN/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Combustivel Nuclear], e-mail: saliba@ipen.br

2010-07-01

The U-Mo alloys are investigated with the goal of becoming nuclear material to fabricate high-density fuel elements for high performance research reactors. This enrichment level suggests that the U-Mo alloys should be between 6 to 10wt%, which can give up to 9gU/cm{sup 3} as fuel density. Nevertheless, the U-Mo alloys are very reactive with Al. Interdiffusion reaction products are formed since nuclear fission promotes chemical interaction layer during operation, leading to potential structural failure. Present studies were made with treated hot rolled diffusion couples of U-10Mo inserted in Al (AA1050). The U-10Mo/AA1050 pairs were treated in two temperature (150 degree C and 550 degree C) with three soaking times (5h, 40h and 80h). From microstructure analyses, rapid diffusion of Al happened inside U-10Mo in the first heating at 540 degree C during 15 min, reaching 8 at%Al in a range of 200 {mu}m towards U-10Mo. Longer time (5, 40, 80h) at 550 degree C maintain this level of Al-content up to 1000 {mu}m inside U-10Mo. A minor depth ({approx}1 {mu}m) near the interdiffusion contact had higher Al-content, but not sufficient to form identifiable (U,Mo)Al{sub x} structures. Probably, residual elements reduced drastically the interdiffusion phenomena between U-10Mo and AA1050, maybe due to silicon presence. (author)

Isochronous 180 degree turns for the SLC positron system

International Nuclear Information System (INIS)

Helm, R.H.; Clendenin, J.E.; Ecklund, S.D.; Kulikov, A.V.; Pitthan, R.

1991-05-01

The design of the compact, achromatic, second order isochronous 180 degrees turn for the SLC positron transport system will be described. Design criteria require an energy range of 200±20 MeV, energy acceptance of ±5%, transverse admittance of 25π mm-mr, and minimal lengthening of the 3 to 4 mm (rms) positron bunch. The devices had to fit within a maximum height or width of about 10 ft. Optics specifications and theoretical performance are presented and compared to experimental results based on streak camera measurements of bunch length immediately after the first isochronous turn (200 MeV) and positron beam energy spread after S-band acceleration to 1.15 GeV. 5 refs., 7 figs

High-Capacity Short-Range Optical Communication Links

DEFF Research Database (Denmark)

Tatarczak, Anna

Over the last decade, we have observed a tremendous spread of end-user mobile devices. The user base of a mobile application can grow or shrink by millions per day. This situation creates a pressing need for highly scalable server infrastructure; a need nowadays satisfied through cloud computing...... offered by data centers. As the popularity of cloud computing soars, the demand for high-speed, short-range data center links grows. Vertical cavity surface emitting lasers (VCSEL) and multimode fibers (MMF) prove especially well-suited for such scenarios. VCSELs have high modulation bandwidths......, we achieve 10 Gbps over 400 m and then conrm the approach in an optimized system at 25 Gbps over 300 m. The techniques described in this thesis leverage additional degrees of freedom to better utilize the available resources of short-range links. The proposed schemes enable higher speeds and longer...

Rotary balance data for a typical single-engine low-wing general aviation design for an angle-of-attack range of 30 deg to 90 deg

Science.gov (United States)

Bihrle, W., Jr.; Hultberg, R. S.; Mulcay, W.

1978-01-01

Aerodynamic characteristics obtained in a spinning flow environment utilizing a rotary balance located spin tunnel are presented in plotted form for a 1/5 scale single-engine low-wing general aviation airplane model. The configurations tested include the basic airplane, various airfoil shapes, tail designs, fuselage strakes and modifications as well as airplane components. Data are presented for pitch and roll angle ranges of 30 to 90 degrees and 10 to -10 degrees, respectively, and clockwise and counter-clockwise rotations covering an Omega b/2V range from 0 to .9. The data are presented without analysis.

Error sensitivity analysis in 10-30-day extended range forecasting by using a nonlinear cross-prediction error model

Science.gov (United States)

Xia, Zhiye; Xu, Lisheng; Chen, Hongbin; Wang, Yongqian; Liu, Jinbao; Feng, Wenlan

2017-06-01

Extended range forecasting of 10-30 days, which lies between medium-term and climate prediction in terms of timescale, plays a significant role in decision-making processes for the prevention and mitigation of disastrous meteorological events. The sensitivity of initial error, model parameter error, and random error in a nonlinear crossprediction error (NCPE) model, and their stability in the prediction validity period in 10-30-day extended range forecasting, are analyzed quantitatively. The associated sensitivity of precipitable water, temperature, and geopotential height during cases of heavy rain and hurricane is also discussed. The results are summarized as follows. First, the initial error and random error interact. When the ratio of random error to initial error is small (10-6-10-2), minor variation in random error cannot significantly change the dynamic features of a chaotic system, and therefore random error has minimal effect on the prediction. When the ratio is in the range of 10-1-2 (i.e., random error dominates), attention should be paid to the random error instead of only the initial error. When the ratio is around 10-2-10-1, both influences must be considered. Their mutual effects may bring considerable uncertainty to extended range forecasting, and de-noising is therefore necessary. Second, in terms of model parameter error, the embedding dimension m should be determined by the factual nonlinear time series. The dynamic features of a chaotic system cannot be depicted because of the incomplete structure of the attractor when m is small. When m is large, prediction indicators can vanish because of the scarcity of phase points in phase space. A method for overcoming the cut-off effect ( m > 4) is proposed. Third, for heavy rains, precipitable water is more sensitive to the prediction validity period than temperature or geopotential height; however, for hurricanes, geopotential height is most sensitive, followed by precipitable water.

Degree-based graph construction

International Nuclear Information System (INIS)

Kim, Hyunju; Toroczkai, Zoltan; Erdos, Peter L; Miklos, Istvan; Szekely, Laszlo A

2009-01-01

Degree-based graph construction is a ubiquitous problem in network modelling (Newman et al 2006 The Structure and Dynamics of Networks (Princeton Studies in Complexity) (Princeton, NJ: Princeton University Press), Boccaletti et al 2006 Phys. Rep. 424 175), ranging from social sciences to chemical compounds and biochemical reaction networks in the cell. This problem includes existence, enumeration, exhaustive construction and sampling questions with aspects that are still open today. Here we give necessary and sufficient conditions for a sequence of nonnegative integers to be realized as a simple graph's degree sequence, such that a given (but otherwise arbitrary) set of connections from an arbitrarily given node is avoided. We then use this result to present a swap-free algorithm that builds all simple graphs realizing a given degree sequence. In a wider context, we show that our result provides a greedy construction method to build all the f-factor subgraphs (Tutte 1952 Can. J. Math. 4 314) embedded within K n setmn S k , where K n is the complete graph and S k is a star graph centred on one of the nodes. (fast track communication)

Degree-degree correlations in directed networks with heavy-tailed degrees

NARCIS (Netherlands)

van der Hoorn, W.L.F.; Litvak, Nelli

2013-01-01

In network theory, Pearson's correlation coefficients are most commonly used to measure the degree assortativity of a network. We investigate the behavior of these coefficients in the setting of directed networks with heavy-tailed degree sequences. We prove that for graphs where the in- and

Degree-degree dependencies in directed networks with heavy-tailed degrees

NARCIS (Netherlands)

van der Hoorn, W.L.F.; Litvak, Nelly

2015-01-01

In network theory, Pearson’s correlation coefficients are most commonly used to measure the degree assortativity of a network. We investigate the behavior of these coefficients in the setting of directed networks with heavy-tailed degree sequences. We prove that for graphs where the in- and

Multi-UAV Doppler Information Fusion for Target Tracking Based on Distributed High Degrees Information Filters

Directory of Open Access Journals (Sweden)

Hamza Benzerrouk

2018-03-01

Full Text Available Multi-Unmanned Aerial Vehicle (UAV Doppler-based target tracking has not been widely investigated, specifically when using modern nonlinear information filters. A high-degree Gauss–Hermite information filter, as well as a seventh-degree cubature information filter (CIF, is developed to improve the fifth-degree and third-degree CIFs proposed in the most recent related literature. These algorithms are applied to maneuvering target tracking based on Radar Doppler range/range rate signals. To achieve this purpose, different measurement models such as range-only, range rate, and bearing-only tracking are used in the simulations. In this paper, the mobile sensor target tracking problem is addressed and solved by a higher-degree class of quadrature information filters (HQIFs. A centralized fusion architecture based on distributed information filtering is proposed, and yielded excellent results. Three high dynamic UAVs are simulated with synchronized Doppler measurement broadcasted in parallel channels to the control center for global information fusion. Interesting results are obtained, with the superiority of certain classes of higher-degree quadrature information filters.

The Correlation Between Porosity, Density and Degree of Serpentinization in Ophiolites from Point Sal, California: Implications for Strength of Oceanic Lithosphere

Science.gov (United States)

Karrasch, A. K.; Farough, A.; Lowell, R. P.

2017-12-01

Hydration and serpentinization of oceanic lithosphere influences its strength and behavior under stress. Serpentine content is the limiting factor in deformation and the correlation between crustal strength and the degree of serpentinization is not linear. Escartin et al., [2001] shows that the presence of only 10% serpentine results in a nominally non-dilatant mode of brittle deformation and reduces the strength of peridotites dramatically. In this study, we measured density and porosity of ophiolite samples from Point Sal, CA that had various degrees of serpentinization. The densities ranged between 2500- 3000 kg/m3 and porosities ranged between 2.1-4.8%. The degree of serpentinization was estimated from mineralogical analysis, and these data were combined with that of 4 other samples analyzed by Farough et al., [2016], which were obtained from various localities. The degree of serpentinization varied between 0.6 and 40%. We found that degree of serpentinization was inversely correlated with density with a slope of 7.25 (kg/m3)/%. Using Horen et al., [1996] models, estimated P-wave velocity of the samples ranged between 6.75-7.90 km/s and S-wave velocity ranged between 3.58-4.35 km/s. There were no distinguishable difference in the results between olivine-rich or pyroxene-rich samples. These results, along with correlations to strength and deformation style, can be used as a reference for mechanical properties of the crust at depth, analysis of deep drill cores and to estimate the rate of weakening of the oceanic crust after the onset of serpentinization reactions.

40 CFR 430.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Science.gov (United States)

2010-07-01

... Maximum for any 1 day Average of daily values for 30 consecutive days BOD5 8.0 4.0 TSS 10.0 5.0 pH (1) (1... Average of daily values for 30 consecutive days BOD5 8.7 4.35 TSS 11.0 5.5 pH (1) (1) 1 Within the range... degree of effluent reduction attainable by the application of the best practicable control technology...

Outcomes of torsional microcoaxial phacoemulsification performed by 12-degree and 22-degree bent tips.

Science.gov (United States)

Helvacioglu, Firat; Yeter, Celal; Tunc, Zeki; Sencan, Sadik

2013-08-01

To compare the safety and efficacy of Ozil Intelligent Phaco torsional microcoaxial phacoemulsification surgeries performed with 12-degree and 22-degree bent tips using the Infiniti Vision System. Maltepe University School of Medicine Department of Ophthalmology, Istanbul, Turkey. Comparative case series. Eyes were assigned to 2.2 mm microcoaxial phacoemulsification using the torsional mode with a 22-degree bent tip (Group 1) or a 12-degree bent tip (Group 2). The primary outcome measures were ultrasound time (UST), cumulative dissipated energy (CDE), longitudinal and torsional ultrasound (US) amplitudes, mean surgical time, mean volume of balanced salt solution used, and surgical complications. Both groups included 45 eyes. The mean UST, CDE, longitudinal US amplitude, and torsional US amplitude were 65 seconds ± 27.23 (SD), 11.53 ± 6.99, 0.22 ± 0.26, and 42.86 ± 15.64, respectively, in Group 1 and 84 ± 45.04 seconds, 16.68 ± 10.66, 0.48 ± 0.68, and 46.27 ± 14.74, respectively, in Group 2. The mean UST, CDE, and longitudinal amplitudes were significantly lower in Group 1 (P=.003, P=.008, and P=.022, respectively). The mean volume of balanced salt solution was 73.33 ± 28.58 cc in Group 1 and 82.08 ± 26.21 cc in Group 2 (P=.134). Torsional phacoemulsification performed with 22-degree bent tips provided more effective lens removal than 12-degree bent tips, with a lower UST and CDE. Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Work in Progress - Developing Joint Degrees through E-Learning Systems

OpenAIRE

Aguirre Herrera, Sandra; Quemada Vives, Juan; Salvachúa Rodríguez, Joaquín

2008-01-01

The development of Joint Degrees is an important mechanism for opening higher education systems nationwide, adapting them to the international standard, and promoting quality assessment to a broader environment. Since e-Learning systems covers a wide range of academic programs, and as joint degrees such as e-Learning are rapidly growing trends, finding a suitable solution that enables universities to design joint degrees through their own e-Learning systems becomes necessary. This paper intro...

Correlation between blister skin thickness, the maximum in the damage-energy distribution, and projected ranges of helium ions in Nb for the energy range 10 to 1500 keV

International Nuclear Information System (INIS)

St-Jacques, R.G.; Martel, J.G.; Terreault, B.; Veilleux, G.; Das, S.K.; Kaminsky, M.; Fenske, G.

1976-01-01

The skin thickness of blisters formed on polycrystalline niobium by 4 He + irradiation at room temperature for energies from 15 to 80 keV have been measured. Similar measurements were conducted for 10 keV 4 He + irradiation at 500 0 C to increase blister exfoliation, and thereby allow examination of a larger number of blister skins. For energies smaller than 100 keV the skin thicknesses are compared with the projected range and the damage-energy distributions constructed from moments interpolated from Winterbon's tabulated values. For energies of 10 and 15 keV the projected ranges and damage-energy distributions have also been computed with a Monte Carlo program. For energies larger than 100 keV the projected ranges of 4 He + in Nb were calculated using either Brice's formalism or the one given by Schiott. The thicknesses for 60 and 80 keV, and those reported earlier for 100 to 1500 keV correlate well with calculated projected ranges. For energies lower than 60 keV the measured thicknesses are larger than the calculated ranges

Ranging Behaviour of Commercial Free-Range Laying Hens.

Science.gov (United States)

Chielo, Leonard Ikenna; Pike, Tom; Cooper, Jonathan

2016-04-26

In this study, the range use and behaviour of laying hens in commercial free-range flocks was explored. Six flocks were each visited on four separate days and data collected from their outdoor area (divided into zones based on distance from shed and available resources). These were: apron (0-10 m from shed normally without cover or other enrichments); enriched belt (10-50 m from shed where resources such as manmade cover, saplings and dust baths were provided); and outer range (beyond 50 m from shed with no cover and mainly grass pasture). Data collection consisted of counting the number of hens in each zone and recording behaviour, feather condition and nearest neighbour distance (NND) of 20 birds per zone on each visit day. In addition, we used techniques derived from ecological surveys to establish four transects perpendicular to the shed, running through the apron, enriched belt and outer range. Number of hens in each 10 m × 10 m quadrat was recorded four times per day as was the temperature and relative humidity of the outer range. On average, 12.5% of hens were found outside. Of these, 5.4% were found in the apron; 4.3% in the enriched zone; and 2.8% were in the outer range. This pattern was supported by data from quadrats, where the density of hens sharply dropped with increasing distance from shed. Consequently, NND was greatest in the outer range, least in the apron and intermediate in the enriched belt. Hens sampled in outer range and enriched belts had better feather condition than those from the apron. Standing, ground pecking, walking and foraging were the most commonly recorded activities with standing and pecking most likely to occur in the apron, and walking and foraging more common in the outer range. Use of the outer range declined with lower temperatures and increasing relative humidity, though use of apron and enriched belt was not affected by variation in these measures. These data support previous findings that outer range areas tend to be

Measured degree of dehydration in children and adolescents with type 1 diabetic ketoacidosis.

Science.gov (United States)

Ugale, Judith; Mata, Angela; Meert, Kathleen L; Sarnaik, Ashok P

2012-03-01

Successful management of diabetic ketoacidosis depends on adequate rehydration while avoiding cerebral edema. Our objectives are to 1) measure the degree of dehydration in children with type 1 diabetes mellitus and diabetic ketoacidosis based on change in body weight; and 2) investigate the relationships between measured degree of dehydration and clinically assessed degree of dehydration, severity of diabetic ketoacidosis, and routine serum laboratory values. Prospective observational study. University-affiliated tertiary care children's hospital. Sixty-six patients dehydration was based on the difference between admission and plateau weights. Clinical degree of dehydration was assessed by physical examination and severity of diabetic ketoacidosis was assessed by blood gas values as defined by international guidelines. Laboratory values obtained on admission included serum glucose, urea nitrogen, sodium, and osmolality. Median measured degree of dehydration was 5.2% (interquartile range, 3.1% to 7.8%). Fourteen (21%) patients were clinically assessed as mild dehydration, 49 (74%) as moderate, and three (5%) as severe. Patients clinically assessed as moderately dehydrated had a greater measured degree of dehydration (5.8%; interquartile range, 3.6% to 9.6%) than those assessed as mildly dehydrated (3.7%; interquartile range, 2.3% to 6.4%) or severely dehydrated (2.5%; interquartile range, 2.3% to 2.6%). Nine (14%) patients were assessed as mild diabetic ketoacidosis, 18 (27%) as moderate, and 39 (59%) as severe. Diabetic ketoacidosis severity groups did not differ in measured degree of dehydration. Variables independently associated with measured degree of dehydration included serum urea nitrogen and sodium concentration on admission. Hydration status in children with diabetic ketoacidosis cannot be accurately assessed by physical examination or blood gas values. Fluid therapy based on maintenance plus 6% deficit replacement is reasonable for most patients.

Effect of growing degree days on autumn planted sunflower ...

African Journals Online (AJOL)

Sunflower (Helianthus annus L.) having high degree of adaptability under wide range of climatic conditions, allow the crop to be productive in broad range of environments. Field experiments in autumn were laid out at Pir Mehr Ali Shah, Arid Agriculture University Rawalpindi, Pakistan for two years (2007 and 2008), ...

Pb solubility of the high-temperature superconducting phase Bi2Sr2Ca2Cu3O10+d

International Nuclear Information System (INIS)

Kaesche, S.; Majewski, P.; Aldinger, F.

1994-01-01

For the nominal composition of Bi 2.27x Pb x Sr 2 Ca 2 Cu 3 O 10+d the lead content was varied from x=0.05 to 0.45. The compositions were examined between 830 degrees C and 890 degrees C which is supposed to be the temperature range over which the so-called 2223 phase (Bi 2 Sr 2 Ca 2 Cu 3 O 10+d ) is stable. Only compositions between x=0.18 to 0.36 could be synthesized in a single phase state. For x>0.36 a lead containing phase with a stoichiometry of Pb 4 (Sr,Ca) 5 CuO d is formed, for x 2 Sr 2 CaCu 2 O 8+d and cuprates are the equilibrium phases. The temperature range for the 2223 phase was found to be 830 degrees C to 890 degrees C but the 2223 phase has extremely varying cation ratios over this temperature range. Former single phase 2223 samples turn to multi phase samples when annealed at slightly higher or lower temperatures. A decrease in the Pb solubility with increasing temperature was found for the 2223 phase

Modular 125 ps resolution time interval digitizer for 10 MHz stop burst rates and 33 ms range

International Nuclear Information System (INIS)

Turko, B.

1978-01-01

A high resolution multiple stop time interval digitizer is described. It is capable of resolving stop burst rates of up to 10 MHz with an incremental resolution of 125 ps within a range of 33 ms. The digitizer consists of five CAMAC modules and uses a standard CAMAC crate and controller. All the functions and ranges are completely computer controlled. Any two subsequent stop pulses in a burst can be resolved within 100 ns due to a new dual interpolation technique employed. The accuracy is maintained by a high stability 125 MHz reference clock. Up to 131 stop events can be stored in a 48-bit, 10 MHz derandomizing storage register before the digitizer overflows. The experimental data are also given

Magnetic field control of 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign domain wall resistance

Energy Technology Data Exchange (ETDEWEB)

Majidi, Roya, E-mail: royamajidi@gmail.com [Department of Physics, Shahid Rajaee Teacher Training University, Lavizan, 16788-15811 Tehran (Iran, Islamic Republic of)

2012-10-01

In the present work, we have compared the resistance of the 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign domain walls in the presence of external magnetic field. The calculations are based on the Boltzmann transport equation within the relaxation time approximation. One-dimensional Neel-type domain walls between two domains whose magnetization differs by angle of 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign are considered. The results indicate that the resistance of the 360 Degree-Sign DW is more considerable than that of the 90 Degree-Sign and 180 Degree-Sign DWs. It is also found that the domain wall resistance can be controlled by applying transverse magnetic field. Increasing the strength of the external magnetic field enhances the domain wall resistance. In providing spintronic devices based on magnetic nanomaterials, considering and controlling the effect of domain wall on resistivity are essential.

Ranging Behaviour of Commercial Free-Range Laying Hens

Directory of Open Access Journals (Sweden)

Leonard Ikenna Chielo

2016-04-01

Full Text Available In this study, the range use and behaviour of laying hens in commercial free-range flocks was explored. Six flocks were each visited on four separate days and data collected from their outdoor area (divided into zones based on distance from shed and available resources. These were: apron (0–10 m from shed normally without cover or other enrichments; enriched belt (10–50 m from shed where resources such as manmade cover, saplings and dust baths were provided; and outer range (beyond 50 m from shed with no cover and mainly grass pasture. Data collection consisted of counting the number of hens in each zone and recording behaviour, feather condition and nearest neighbour distance (NND of 20 birds per zone on each visit day. In addition, we used techniques derived from ecological surveys to establish four transects perpendicular to the shed, running through the apron, enriched belt and outer range. Number of hens in each 10 m × 10 m quadrat was recorded four times per day as was the temperature and relative humidity of the outer range. On average, 12.5% of hens were found outside. Of these, 5.4% were found in the apron; 4.3% in the enriched zone; and 2.8% were in the outer range. This pattern was supported by data from quadrats, where the density of hens sharply dropped with increasing distance from shed. Consequently, NND was greatest in the outer range, least in the apron and intermediate in the enriched belt. Hens sampled in outer range and enriched belts had better feather condition than those from the apron. Standing, ground pecking, walking and foraging were the most commonly recorded activities with standing and pecking most likely to occur in the apron, and walking and foraging more common in the outer range. Use of the outer range declined with lower temperatures and increasing relative humidity, though use of apron and enriched belt was not affected by variation in these measures. These data support previous findings that outer range

Mobile bearing medial unicompartmental knee arthroplasty in patients whose lifestyles involve high degrees of knee flexion: A 10-14year follow-up study.

Science.gov (United States)

Choy, Won Sik; Lee, Kwang Won; Kim, Ha Yong; Kim, Kap Jung; Chun, Young Sub; Yang, Dae Suk

2017-08-01

Because Asian populations have different lifestyles, such as squatting and sitting on the floor, from those of Western populations, it is possible that the clinical results and survival rate of unicompartmental knee arthroplasty (UKA) for Asian patients may be different. This study described outcomes of mobile bearing medial UKA for Korean patients. A total of the 164 knees treated with mobile bearing UKAs in 147 patients (14 males and 133 females) were reviewed. The mean follow-up period was 12.1years (range 10.1-14). The clinical outcomes, such as the Hospital for Special Surgery Knee score, the Oxford Knee Score and the Knee Society rating system, showed statistically significant improvement from pre-operative to final follow-up (Pbearing dislocation. The 95% confidence interval of survival rate at 12years was 84.1%, with revision for any reason as the end point. Minimally invasive mobile bearing UKA in Asian patients who required high degrees of knee flexion showed rapid recovery and good clinical outcome. However, they also showed relatively high rates of bearing dislocation and aseptic loosening. Therefore, mobile bearing UKA should only be performed in patients whose lifestyle involves high flexions after carefully considering these risks and benefits. Copyright © 2017 Elsevier B.V. All rights reserved.

Commercial cyclotrons. Part I: Commercial cyclotrons in the energy range 10 30 MeV for isotope production

Science.gov (United States)

Papash, A. I.; Alenitsky, Yu. G.

2008-07-01

A survey of commercial cyclotrons for production of medical and industrial isotopes is presented. Compact isochronous cyclotrons which accelerate negative hydrogen ions in the energy range 10 30 MeV have been widely used over the last 25 years for production of medical isotopes and other applications. Different cyclotron models for the energy range 10 12 MeV with moderate beam intensity are used for production of 11C, 13N, 15O, and 18F isotopes widely applied in positron emission tomography. Commercial cyclotrons with high beam intensity are available on the market for production of most medical and industrial isotopes. In this work, the physical and technical parameters of different models are compared. Possibilities of improving performance and increasing intensity of H- beams up to 2 3 mA are discussed.

Magnetism and atomic short-range order in Ni-Rh alloys

Science.gov (United States)

Carnegie, D. W., Jr.; Claus, H.

1984-07-01

Low-field ac susceptibility measurements of Ni-Rh samples of various concentrations are presented. Giant effects of the metallurgical state on the magnetic ordering temperature are associated with changes in the degree of atomic short-range order. By careful control of this degree of short-range order, it is possible to demonstrate the existence of a spin-glass state in Ni-Rh alloys.

360/degree/ digital phase detector with 100-kHz bandwidth

International Nuclear Information System (INIS)

Reid, D.W.; Riggin, D.; Fazio, M.V.; Biddle, R.S.; Patton, R.D.; Jackson, H.A.

1981-01-01

The general availability of digital circuit components with propagation delay times of a few nanoseconds makes a digital phase detector with good bandwidth feasible. Such a circuit has a distinct advantage over its analog counterpart because of its linearity over a wide range of phase shift. A description is given of a phase detector that is being built at Los Alamos National Laboratory for the Fusion Materials Irradiation Test (FMIT) project. The specifications are 100-kHz bandwidth, linearity of /plus or minus/1/degree/ over /plus or minus/180/degree/ of phase shift, and 0.66/degree/ resolution. To date, the circuit has achieved the bandwidth and resolution. The linearity is approximately /plus or minus/3/degree/ over /plus or minus/180/degree/ phase shift. 3 refs

Measurements of short-range ordering in Ni3Al

International Nuclear Information System (INIS)

Okamoto, J.K.; Ahn, C.C.

1992-01-01

This paper reports on extended electron energy-loss fine structure (EXELFS) that has been used to measure short-range ordering in Ni 3 Al. Films of fcc Ni 3 Al with suppressed short-range order synthesized by vacuum evaporation of Ni 3 Al onto room temperature substrates. EXELFS data were taken from both Al K and Ni L 23 edges. The development of short-range order was observed after the samples were annealed for various times at temperatures below 350 degrees C. Upon comparison with ab initio planewave EXELFS calculations, it was found that the Warren-Cowley short-range order parameter a(1nn) changed by about -0.1 after 210 minutes of annealing at 150 degrees C

Characteristics of the Equine Degree Department: Budgeting and the Department Chairperson.

Science.gov (United States)

Matte, Grace E.

This study examined characteristics of 73 equine degree programs in the United States, the training and duties of their department chairpersons, and their budgetary processes. Analysis of data from questionnaire responses revealed a large variety of equine degree and minor programs, with annual budgets ranging from $2,000 to $757,200. Public…

Long-term strength of claddings made of E110 in the temperature range of 400-570 degrees C

International Nuclear Information System (INIS)

Kobylyansky, G.; Shamardin, V.; Eremin, S.

2003-01-01

This paper presents the data on the initial stage of the in-sight into the mechanism of long-term strength of spent fuel rod claddings in the temperature range 400-570 0 C and also their comparison with corresponding mechanism of irradiated in the inert environment specimens and unirradiated ones. A set of test results in the temperature range 400-570 0 C of non-irradiated and irradiated in BOR-60 specimens and also of the WWER-1000 fuel element claddings irradiated up to a burnup of 29-47 MWd/kgU is approximated by Larson-Miller parametric dependence in the first approximation that allows the long-term strength data to be extrapolated and interpolated onto the unknown value regions of stress, temperature and time. The time before damage of the fuel element claddings irradiated up to ∼ 29MWd/kgU in the temperature range 540-570 0 C is higher than that of non-irradiated tubular specimens and irradiated ones up to fast neutron fluence (1-2)x10 22 cm -2 (E >0.1 MeV). With temperature decreasing to 673 K, the long-term strength of the claddings irradiated up to ∼ 47 MWd/kgU is lower than it can be expected from the extrapolation of high-temperature data obtained with the irradiated specimens. Now, the bulk of experimental data on the long-term strength of the claddings made of E110 alloy makes it possible to provide only preliminary estimation for the validation of parameters typical of the deviation from the normal operation conditions; emergencies and accidental situations; dry and wet storage and also transportation. The experiments should be continued to accumulate missing data, in particular, tests of fuel element claddings irradiated up to high burnup at temperatures ranging 300-400 0 C and stresses, which are significantly lower than the yield stress

Experimental investigation of a flow-induced oscillating cylinder with two degrees-of-freedom

International Nuclear Information System (INIS)

Someya, Satoshi; Kuwabara, Joji; Li, YanRong; Okamoto, Koji

2010-01-01

The phenomenon of flow-induced vibration of bluff bodies has been studied extensively. The vast majority of these studies have concentrated solely on one degree-of-freedom oscillation in the inline or cross-flow directions. Herein, experiments were carried out with a cylinder in a water channel with two degrees-of-freedom. The cylinder was cantilever mounted with a low natural frequency (typically 65 Hz) in the inline and cross-flow directions. The Reynolds number fell in the range 1.17 x 10 3 4 . The oscillating frequency of the cylinder and the surrounding flow were measured simultaneously using high temporal resolution particle image velocimetry (PIV), which is non-intrusive with respect to the flow and has high spatial and temporal resolutions. The vibration of the cylinder was found to be anisotropic. There was a discrepancy between the vibration frequencies in the inline and cross-flow directions, the difference being a function of reduced velocity.

Study of Primary Cosmic Ray Electrons In Energy Range 10^11 - 10^13 Ev By Pamela Instrument.

Science.gov (United States)

Voronov, S.; Pamela Collaboration

The main goal of the magnetic spectrometer PAMELA is the study of antiparticle fluxes with energy up to 300 GeV in cosmic rays on board satellite. A modification of instrument was done by introducing of neutron detector. This device was placed under imaging calorimeter and bottom scintillator counter. It consists of two layers of 36 3He gas counters enveloped by a polyethylene moderator. The neutron detector gives additional possibility to identify the antiprotons going in aperture of spectrome- ter and generating the nuclear cascade in tungsten plates of calorimeter. This shower is followed by big number of neutrons in contrast to electromagnetic one caused by elec- tron or positron. From other side the combination of the imaging calorimeter, bottom scintillator and neutron detector constitute the independent instrument with large field of view which gives the possibility to measure the electron-positron cosmic ray com- ponent in energy range 1011-1013 eV with a rejection factor of order 10-4 regarding to nuclear one.

When Graduate Degrees Prostitute the Educational Process: Degrees Gone Wild

Science.gov (United States)

Lumadue, Richard T.

2006-01-01

Graduate degrees prostitute the educational process when they are sold to consumers by unaccredited degree/diploma mills as being equivalent to legitimate, bona-fide degrees awarded by accredited graduate schools. This article carefully analyzes the serious problems of bogus degrees and their association with the religious higher education…

Gravity model improvement using GEOS-3 (GEM 9 and 10)

Science.gov (United States)

Lerch, F. J.; Klosko, S. M.; Laubscher, R. E.; Wagner, C. A.

1977-01-01

The use of collocation permitted GEM 9 to be a larger field than previous derived satellite models, GEM 9 having harmonics complete to 20 x 20 with selected higher degree terms. The satellite data set has approximately 840,000 observations, of which 200,000 are laser ranges taken on 9 satellites equipped with retroreflectors. GEM 10 is complete to 22 x 22 with selected higher degree terms out to degree and order 30 amounting to a total of 592 coefficients. Comparisons with surface gravity and altimeter data indicate a substantial improvement in GEM 9 over previous satellite solutions; GEM 9 is in even closer agreement with surface data than the previously published GEM 6 solution which contained surface gravity. In particular the free air gravity anomalies calculated from GEM 9 and a surface gravity solution are in excellent agreement for the high degree terms.

High Precision Ranging and Range-Rate Measurements over Free-Space-Laser Communication Link

Science.gov (United States)

Yang, Guangning; Lu, Wei; Krainak, Michael; Sun, Xiaoli

2016-01-01

We present a high-precision ranging and range-rate measurement system via an optical-ranging or combined ranging-communication link. A complete bench-top optical communication system was built. It included a ground terminal and a space terminal. Ranging and range rate tests were conducted in two configurations. In the communication configuration with 622 data rate, we achieved a two-way range-rate error of 2 microns/s, or a modified Allan deviation of 9 x 10 (exp -15) with 10 second averaging time. Ranging and range-rate as a function of Bit Error Rate of the communication link is reported. They are not sensitive to the link error rate. In the single-frequency amplitude modulation mode, we report a two-way range rate error of 0.8 microns/s, or a modified Allan deviation of 2.6 x 10 (exp -15) with 10 second averaging time. We identified the major noise sources in the current system as the transmitter modulation injected noise and receiver electronics generated noise. A new improved system will be constructed to further improve the system performance for both operating modes.

Second-degree discrete Painleve equations conceal first-degree ones

International Nuclear Information System (INIS)

Ramani, A; Grammaticos, B; Joshi, N

2010-01-01

We examine various second-degree difference equations which have been proposed over the years and according to their authors' claims should be integrable. This study is motivated by the fact that we consider that second-degree discrete systems cannot be integrable due to the proliferation of the images (and pre-images) of the initial point. We show that in the present cases no contradiction exists. In all cases examined, we show that there exists an underlying integrable first-degree mapping which allows us to obtain an appropriate solution of the second-degree one.

Long-range correlations and universality in plasma edge turbulence

International Nuclear Information System (INIS)

Milligen, B.Ph. van; Pedrosa, M.A.; Carreras, B.A.

1999-01-01

Long-range correlations in turbulence, associated with self-similarity of the fluctuations, are a signature of transport by avalanches as occurs in Self-Organized Critical systems. We have investigated long-range correlations in plasma edge fluctuations in a variety of fusion devices, using the Rescaled-Range and similar techniques. We find that the degree of self-similarity in confining devices is high and similar between devices, and much different from non-confining devices where it is low. Likewise, we find that turbulent spectra show a high degree of similarity between devices. These findings strongly indicate the existence of universality in plasma edge (ohmic) turbulence, and demonstrate its non-Gaussian character. (author)

Modulation of auroral electron fluxes in the frequency range 50 kHz to 10 MHz

Science.gov (United States)

Spiger, R. J.; Murphree, J. S.; Anderson, H. R.; Loewenstein, R. F.

1976-01-01

A sounding rocket-borne electron detector of high time resolution is used to search for modulation of auroral electron fluxes in the frequency range 50 kHz to 10 MHz and energy range 5-7 keV. Data were telemetered to ground via a 93-kHz subcarrier. A cross-correlation analysis of the data collected indicates low-level modulation near the detection threshold of the instrument. Two U-1 events are observed which are interpreted as indications of modulation. The two modulation events occur during a period of increasing flux for a region marking the boundary between two current sheets detected by the payload magnetometer. The strongest argument against interference contamination is the lack of any observable modulation at times other than those mentioned in the study.

Climate change, elevational range shifts, and bird extinctions.

Science.gov (United States)

Sekercioglu, Cagan H; Schneider, Stephen H; Fay, John P; Loarie, Scott R

2008-02-01

Limitations imposed on species ranges by the climatic, ecological, and physiological effects of elevation are important determinants of extinction risk. We modeled the effects of elevational limits on the extinction risk of landbirds, 87% of all bird species. Elevational limitation of range size explained 97% of the variation in the probability of being in a World Conservation Union category of extinction risk. Our model that combined elevational ranges, four Millennium Assessment habitat-loss scenarios, and an intermediate estimate of surface warming of 2.8 degrees C, projected a best guess of 400-550 landbird extinctions, and that approximately 2150 additional species would be at risk of extinction by 2100. For Western Hemisphere landbirds, intermediate extinction estimates based on climate-induced changes in actual distributions ranged from 1.3% (1.1 degrees C warming) to 30.0% (6.4 degrees C warming) of these species. Worldwide, every degree of warming projected a nonlinear increase in bird extinctions of about 100-500 species. Only 21% of the species predicted to become extinct in our scenarios are currently considered threatened with extinction. Different habitat-loss and surface-warming scenarios predicted substantially different futures for landbird species. To improve the precision of climate-induced extinction estimates, there is an urgent need for high-resolution measurements of shifts in the elevational ranges of species. Given the accelerating influence of climate change on species distributions and conservation, using elevational limits in a tested, standardized, and robust manner can improve conservation assessments of terrestrial species and will help identify species that are most vulnerable to global climate change. Our climate-induced extinction estimates are broadly similar to those of bird species at risk from other factors, but these estimates largely involve different sets of species.

Risk of osteoporosis in first degree relatives of patients with diabetes mellitus: a study of bone mineral ions

International Nuclear Information System (INIS)

Rana, G.E.; Malik, A.; Khurshid, R.

2011-01-01

Diabetes may influence the bone in multiple pathways, some with contradictory effects. These mechanisms include changes in insulin and hypercalciuria, phophatemia, hypomagnesaemia associated with glycosuria. We tried to find out level of minerals in first degree relatives of patients with diabetes mellitus as there is relationship between bone minerals and glycemic controls. Methods: Fifty local subjects age range 40 -50 years with family history of diabetes (first degree relatives) were included in the study. Duration of study was 6 months. Levels of blood sugar, serum calcium, phosphorus and magnesium were estimated by standard Randox kits. 10 males and 10 female subjects with no history of diabetes were considered as normal controls. Results: The level of blood glucose in both sexes was increased as compared to their controls but this showed no significant difference. Level of serum calcium and magnesium were significantly decreased (p<0.05, 0.001) in both males and females when compared with the values of their controls. Level of phosphorous was significantly increased ( p<0.05) in both first degree relatives of ma le and females as compared to level of phosphorous of their controls. Conclusion: Pre-diabetes and undiagnosed T2DM are conditions for which screening can be helpful to find out that first degree relatives not only at risk to develop diabetes but they also likely to develop osteoporosis in a sizable portion of the population. However there is a need for further research including the incidence and risk factors for osteoporotic fractures in first degree relatives of diabetics. (author)

[Analysis of master degree thesis of otolaryngology head and neck surgery in Xinjiang].

Science.gov (United States)

Ayiheng, Qukuerhan; Niliapaer, Alimu; Yalikun, Yasheng

2010-12-01

To understand the basic situation and development of knowledge structure and ability of master degree of Otolaryngology Head and Neck Surgery in Xinjiang region in order to provide reference to further improve the quality of postgraduate students. Fourty-six papers of Otolaryngology master degree thesis were reviewed at randomly in terms of types, subject selection ranges as well as statistical methods during 1998-2009 in Xinjiang region in order to analyze and explore its advantages and characteristics and suggest a solution for its disadvantages. In 46 degree thesis, nine of them are scientific dissertations accounting for 19.57%, 37 are clinical professional degree thesis, accounting for 80.43%. Five are Experimental research papers, 30 are clinical research papers, 10 are clinical and experimental research papers, 1 of them is experimental epidemiology research paper; in this study, the kinds of diseases including every subject of ENT, various statistical methods are involved; references are 37.46 in average, 19.55 of them are foreign literatures references in nearly 5 years are 13.57; four ethnic groups are exist in postgraduate students with high teaching professional level of tutors. The clinical research should be focused in order to further research on ENT common diseases, the application of advanced research methods, the full application of the latest literature, tutors with high-level, training of students of various nationalities, basic research needs to be innovative and should be focus the subject characteristics, to avoid excessive duplication of research.

Psychology Degrees: Employment, Wage, and Career Trajectory Consequences.

Science.gov (United States)

Rajecki, D W; Borden, Victor M H

2011-07-01

Psychology is a very popular undergraduate major. Examining wage data from a range of degree holders reveals much about the expected career trajectories of those with psychology degrees. First, regarding baccalaureates, psychology and other liberal arts graduates-compared with those from certain preprofessional and technical undergraduate programs-generally fall in relatively low tiers of salary levels at both starting and later career points. Salary levels among baccalaureate alumni groups correlate with averaged measures of salary satisfaction, repeated job seeking, and perceptions of underemployment. These patterns seem to stem from the specific occupational categories (job titles) entered by graduates in psychology compared with other graduates, calling into question the employability advantage of so-called generic liberal arts skills. Second, psychology master's degree holders also generally fall in a low tier of salary among their science, engineering, and health counterparts. Third, psychology college faculty (including instructors) fall in low tiers of salary compared with their colleagues from other academic fields. Such broadly based indications of the relative economic disadvantages of psychology degrees have implications for career counseling in the field. © The Author(s) 2011.

Neutron production from 40 GeV/c mixed proton/pion beam on copper, silver and lead targets in the angular range 30-135 degree

CERN Document Server

Agosteo, S; Dimovasili, E; Foglio-Para, A; Silari, M; Ulrici, L; Vincke, H

2005-01-01

The neutron emission from 50 mm thick copper, silver and lead targets bombarded by a mixed proton/pion beam with momentum of 40 GeV/c were measured at the CERN Super Proton Synchrotron. The neutron yield and spectral fluence per incident particle on target were measured with an extended range Bonner sphere spectrometer in the angular range 30-135 degree with respect to the beam direction. Monte Carlo simulations with the FLUKA code were performed to provide a priori information for the unfolding of the experimental data. The spectral fluences show two peaks, an isotropic evaporation component centred at 3 MeV and a high-energy peak sitting around 100-150 MeV. The experimental neutron yields are given in four energy bins: less than 100 keV, 0.1-20 MeV, 20-500 MeV and 0.5-2 GeV. The total yields show a systematic discrepancy of 30-50%, with a peak of 70% at the largest angles, with respect to the results of the Monte Carlo simulations, which it is believed to be mainly due to uncertainties in the beam normaliza...

Polarimetric purity and the concept of degree of polarization

Science.gov (United States)

Gil, José J.; Norrman, Andreas; Friberg, Ari T.; Setälä, Tero

2018-02-01

The concept of degree of polarization for electromagnetic waves, in its general three-dimensional version, is revisited in the light of the implications of the recent findings on the structure of polarimetric purity and of the existence of nonregular states of polarization [J. J. Gil et al., Phys Rev. A 95, 053856 (2017), 10.1103/PhysRevA.95.053856]. From the analysis of the characteristic decomposition of a polarization matrix R into an incoherent convex combination of (1) a pure state Rp, (2) a middle state Rm given by an equiprobable mixture of two eigenstates of R, and (3) a fully unpolarized state Ru -3 D, it is found that, in general, Rm exhibits nonzero circular and linear degrees of polarization. Therefore, the degrees of linear and circular polarization of R cannot always be assigned to the single totally polarized component Rp. It is shown that the parameter P3 D proposed formerly by Samson [J. C. Samson, Geophys. J. R. Astron. Soc. 34, 403 (1973), 10.1111/j.1365-246X.1973.tb02404.x] takes into account, in a proper and objective form, all the contributions to polarimetric purity, namely, the contributions to the linear and circular degrees of polarization of R as well as to the stability of the plane containing its polarization ellipse. Consequently, P3 D constitutes a natural representative of the degree of polarimetric purity. Some implications for the common convention for the concept of two-dimensional degree of polarization are also analyzed and discussed.

Reflux and Belching After 270 Degree Versus 360 Degree Laparoscopic Posterior Fundoplication

NARCIS (Netherlands)

Broeders, Joris A.; Bredenoord, Albert J.; Hazebroek, Eric J.; Broeders, Ivo A.; Gooszen, Hein G.; Smout, André J.

2012-01-01

Objective: To investigate differences in effects of 270 degrees (270 degrees LPF) and 360 degrees laparoscopic posterior fundoplication (360 degrees LPF) on reflux characteristics and belching. Background: Three hundred sixty degrees LPF greatly reduces the ability of the stomach to vent ingested

Multibeam bathymetric, gravity and magnetic studies over 79 degrees E fracture zone, central Indian basin

Digital Repository Service at National Institute of Oceanography (India)

KameshRaju, K.A.; Ramprasad, T.; Kodagali, V.N.; Nair, R.R.

A regional scale bathymetric map has been constructed for the 79 degrees E fracture zone (FZ) in the Central Indian Basin between 10 degrees 15'S and 14 degrees 45'S lat. and 78 degrees 55'E and 79 degrees 20'E long. using the high...

[Changes in the bacteriological, chemical and organoleptic characteristics of the Antartic krill (Euphausia superba) during storage at 0-2 degrees C].

Science.gov (United States)

Locati, G A; Espeche, M E; Fraile, E R

1980-01-01

A study was performed on the bacteriological, chemical and organoleptic characteristics of antartic krill (Euphausia superba) stored at 0-2 degrees C. After 6-8 hours of storage a dark color started in the head and legs and spread slowly to the tail. Within 24 hours 17% of the total nitrogen was lost by hepatopancreas autolisis. After 72 hours the krill became inedible due to strong amoniacal odor and flavor. These changes were associated with the multiplication of aerobic psychrophilic bacteria. The bacterial counts of freshly caught krill ranged between 3,7 X 10(2)/g and 2,5 X 10(5)/g at 21 degrees C. During storage at 0-2 degrees C the counts gradually increased and off-odors were produced when they reached values of 10(6)/g at 21 degrees C. The total volatile bases content of freshly caught krill, 0.018 to 0.038%, increased considerably during storage reaching values of approximately 0.100% when off-odors became noticeable and 0.200% or more when the odor was clearly ammoniacal. Pseudomonas spp Gp. II (Shewan) were predominant in the bacterial flora of the freshly caught krill along with Moraxella spp Alcalígenes spp, Vibrio spp, Micrococcus spp and coryneforms. The spoilage flora developed during cold storage consisted mainly of Pseudomonas spp G. II (96-100%). The results were related to the saline composition of medium; however, Pseudomonas spp Gp. II were predominant with both media used.

Behaviour in air at 175-400 degrees C of irradiated UO2 fuel

International Nuclear Information System (INIS)

Hastings, I.J.; McCracken, D.

1984-09-01

The authors extended their study of irradiated, defected UO 2 fuel elements to 200 and 400 degrees C. At 200 degrees C there was no diametral change, but at 400 degrees C we observed swelling and severe sheath splitting. Neither short-lived fission products, nor Cs-134, Cs-137 or Ru-106 above background, were detected. Maximum Kr-85 release was 4 Bq ( -6 Ci). Discharge time was 2.5 years. UO 2 fragment studies were extended to 400 degrees C. The oxidation process for unirradiated and irradiated fuel up to 300 degrees C was characterized by activation energies of 140 +- 10 and 120 +- 10 kJ/mol, respectively; enhancement of oxidation rate was confirmed in the irradiated samples. There is an apparent reduction of activation energy above about 300 degrees C. Fuel elements with artificial and natural defects showed similar oxidation and dimensional response at 250 degrees C. Behaviour of fuel fragments from the defect area of a naturally-defected element is consistent with that for fragments from intact elements when prior oxidation during the defect period is considered

The effect of concentric constriction of the visual field to 10 and 15 degrees on simulated motor vehicle accidents

Science.gov (United States)

Udagawa, Sachiko; Iwase, Aiko; Susuki, Yuto; Kunimatsu-Sanuki, Shiho; Fukuchi, Takeo; Matsumoto, Chota; Ohno, Yuko; Ono, Hiroshi; Sugiyama, Kazuhisa; Araie, Makoto

2018-01-01

Purpose Traffic accidents are associated with the visual function of drivers, as well as many other factors. Driving simulator systems have the advantage of controlling for traffic- and automobile-related conditions, and using pinhole glasses can control the degree of concentric concentration of the visual field. We evaluated the effect of concentric constriction of the visual field on automobile driving, using driving simulator tests. Methods Subjects meeting criteria for normal eyesight were included in the study. Pinhole glasses with variable aperture sizes were adjusted to mimic the conditions of concentric visual field constrictions of 10° and 15°, using a CLOCK CHART®. The test contained 8 scenarios (2 oncoming right-turning cars and 6 jump-out events from the side). Results Eighty-eight subjects were included in the study; 37 (mean age = 52.9±15.8 years) subjects were assigned to the 15° group, and 51 (mean = 48.6±15.5 years) were assigned to the 10° group. For all 8 scenarios, the number of accidents was significantly higher among pinhole wearing subjects. The average number of all types of accidents per person was significantly higher in the pinhole 10° group (4.59±1.81) than the pinhole 15° group (3.68±1.49) (P = 0.032). The number of accidents associated with jump-out scenarios, in which a vehicle approaches from the side on a straight road with a good view, was significantly higher in the pinhole 10° group than in the pinhole 15° group. Conclusions Concentric constriction of the visual field was associated with increased number of traffic accidents. The simulation findings indicated that a visual field of 10° to 15° may be important for avoiding collisions in places where there is a straight road with a good view. PMID:29538425

Mechanical design for the Evryscope: a minute cadence, 10,000-square-degree FoV, gigapixel-scale telescope

Science.gov (United States)

Ratzloff, Jeff; Law, Nicholas M.; Fors, Octavi; Wulfken, Philip J.

2015-01-01

We designed, tested, prototyped and built a compact 27-camera robotic telescope that images 10,000 square degrees in 2-minute exposures. We exploit mass produced interline CCD Cameras with Rokinon consumer lenses to economically build a telescope that covers this large part of the sky simultaneously with a good enough pixel sampling to avoid the confusion limit over most of the sky. We developed the initial concept into a 3-d mechanical design with the aid of computer modeling programs. Significant design components include the camera assembly-mounting modules, the hemispherical support structure, and the instrument base structure. We simulated flexure and material stress in each of the three main components, which helped us optimize the rigidity and materials selection, while reducing weight. The camera mounts are CNC aluminum and the support shell is reinforced fiberglass. Other significant project components include optimizing camera locations, camera alignment, thermal analysis, environmental sealing, wind protection, and ease of access to internal components. The Evryscope will be assembled at UNC Chapel Hill and deployed to the CTIO in 2015.

Primary standard for the number concentration of liquid-borne particles in the 10 to 20 µm diameter range

International Nuclear Information System (INIS)

Sakaguchi, T; Ehara, K

2011-01-01

The national primary standard for the number concentration of liquid-borne particles in the 10 to 20 µm diameter range has been developed at the National Institute of Advanced Industrial Science and Technology (AIST), Japan. The standard consists of a total number counting type flow cytometer (T-FCM) and an electronic balance. The T-FCM is a commercial flow cytometer modified so that the total number of particles in an aqueous suspension sampled in a test tube can be counted, and the electronic balance is used to determine the mass of the suspension. This standard is intended to be used for calibrating commercial standard suspensions of monodisperse polystyrene latex (PSL) particles. The measurand in the calibration is the mass-based number concentration (the particle number in a unit mass of a suspension), and the calibration capability covers the concentration range from 5 × 10 2 to 2 × 10 6 particles g −1 . When the concentration of the suspension is higher than 2 × 10 3 particles g −1 , the suspension is first diluted to about 1 × 10 3 particles g −1 to suppress the coincidence loss in particle counting by the T-FCM. The validity of the calibration with the T-FCM was examined by comparison with an independent method in which a scanning electron microscope (SEM) was used to determine the number concentration of particles deposited on a silicon wafer. For a suspension of 10 µm PSL particles with a concentration of approximately 1 × 10 6 particles g −1 , the concentration values determined by the T-FCM and SEM methods were 1.042 × 10 6 and 1.035 × 10 6 particles g −1 , respectively: The difference was less than 0.7%. The relative expanded uncertainty of the measurement by the T-FCM method with the coverage factor k = 2 was 4.4%

[Autogenous platelet-rich plasma gel with acellular xenogeneic dermal matrix for treatment of deep II degree burns].

Science.gov (United States)

Hao, Tianzhi; Zhu, Jingmin; Hu, Wenbo; Zhang, Hua; Gao, Zhenhui; Wen, Xuehui; Zhou, Zhi; Lu, Gang; Liu, Jingjie; Li, Wen

2010-06-01

To investigate the effectiveness of autogenous platelet-rich plasma (PRP) gel with acellular xenogeneic dermal matrix in the treatment of deep II degree burns. From January 2007 to December 2009, 30 cases of deep II degree burns were treated. There were 19 males and 11 females with an average age of 42.5 years (range, 32-57 years). The burn area was 10% to 48% of total body surface area. The time from burn to hospitalization was 30 minutes to 8 hours. All patients were treated with tangential excision surgery, one side of the wounds were covered with autogenous PRP gel and acellular xenogeneic dermal matrix (PRP group), the other side of the wounds were covered with acellular xenogeneic dermal matrix only (control group). The healing rate, healing time, infection condition, and scar formation were observed. At 7 days after operation, the infection rate in PRP group (6.7%, 2/30) was significantly lower than that in control group (16.7%, 5/30, P deep II degree burns as well as alleviate the scar proliferation.

The Degree Cycle

DEFF Research Database (Denmark)

Wood, Johanna

2016-01-01

, empirical data relevant to the development of the degree adverb function is presented and possible relevant constructions identified. It is argued that the degree adverb function of that possibly occurs later than the historical dictionaries indicate. The degree adverb function of this is challenging...

TNF-Alpha Levels in Tears: A Novel Biomarker to Assess the Degree of Diabetic Retinopathy

Directory of Open Access Journals (Sweden)

C. Costagliola

2013-01-01

Full Text Available We assess the level of tumour necrosis factor alpha (TNF-alpha in tear fluids and other serum parameters associated with diabetes in different degrees of diabetic retinopathy. We have performed a prospective, nonrandomized, observational study. Study population consisted of 16 healthy subjects (controls and 32 type 2 diabetic patients: 16 affected by proliferative diabetic retinopathy (PDR and 16 with nonproliferative retinopathy (NDPR, background/preproliferative. Body mass index, urinary albumin, blood glucose, HbA1c, and tear levels of TNF-alpha were measured in all subjects. The value of glycaemia, microalbuminurea, and Body mass index in diabetic retinopathy groups were higher than those in control group (. Glycemia in NPDR: 6.6 mmol/L (range: 5.8–6.3; in PDR: 6.7 mmol/L (range: 6.1–7.2; in control: 5.7 mmol/L (range: 4.9–6.1; microalbuminurea in NPDR: 10.6 mg/L (range: 5.6–20; in PDR: 25.2 mg/L (range: 17–40; in control: 5.3 mg/L (range: 2.6–10; Body mass index in NPDR: 26 Kg/m2 (range: 20.3–40; in PDR: 28 Kg/m2 (range 20.3–52; in control: 21 Kg/m2 (range 19–26. The TNF-alpha concentrations in tears increase with the severity of pathology and were lower in control group than in diabetic subjects. In the end, the level of TNF-alpha is highly correlated with severity of diabetic retinopathy and with nephropathy. Tear fluid collection may be a useful noninvasive method for the detection of proliferative diabetic retinopathy.

Adolescent obesity and future college degree attainment.

Science.gov (United States)

Fowler-Brown, Angela G; Ngo, Long H; Phillips, Russell S; Wee, Christina C

2010-06-01

The current impact of adolescent obesity on educational attainment is not clear. The objectives of our study were to determine whether adolescent obesity is associated with college degree attainment and how this association may have changed over time. We used data from a contemporary national cohort of over 4,000 persons who were adolescents (aged 14-18) in 1997 to assess the relationship between adolescent obesity and education. To assess for changes in this relationship over time, we also analyzed an older, similarly structured cohort of over 3,000 persons who were adolescents (aged 16-18) in 1981. Our primary outcome was college degree completion. We found that in the older cohort (adolescents in 1979), there were no differences in college degree attainment by adolescent weight status before and after adjustment. However, unadjusted analysis of the contemporary cohort (adolescents in 1997) demonstrated that those who were normal weight as adolescents had a higher prevalence of college degree attainment at follow-up compared to obese adolescents (24% vs. 10%). After adjustment for socio-demographic variables (age, sex, race, height, parental income-to-poverty ratio, parental education, aptitude test scores), obese adolescents were less likely to have attained a college degree compared to normal weight peers (adjusted risk ratio 0.61 95% confidence interval 0.38-0.83). Expectations for a future college degree did not vary by weight status and did not explain this observation. In conclusion, adolescent obesity is associated with lower likelihood of college completion. This relationship was not observed in an older cohort of adolescents.

Influence of different degrees of bilateral emulated contractures at the triceps surae on gait kinematics: The difference between gastrocnemius and soleus.

Science.gov (United States)

Attias, M; Bonnefoy-Mazure, A; De Coulon, G; Cheze, L; Armand, S

2017-10-01

Ankle plantarflexion contracture results from a permanent shortening of the muscle-tendon complex. It often leads to gait alterations. The objective of this study was to compare the kinematic adaptations of different degrees of contractures and between isolated bilateral gastrocnemius and soleus emulated contractures using an exoskeleton. Eight combinations of contractures were emulated bilaterally on 10 asymptomatic participants using an exoskeleton that was able to emulate different degrees of contracture of gastrocnemius (biarticular muscle) and soleus (monoarticular muscle), corresponding at 0°, 10°, 20°, and 30° ankle plantarflexion contracture (knee-flexed and knee-extended). Range of motion was limited by ropes attached for soleus on heel and below the knee and for gastrocnemius on heel and above the knee. A gait analysis session was performed to evaluate the effect of these different emulated contractures on the Gait Profile Score, walking speed and gait kinematics. Gastrocnemius and soleus contractures influence gait kinematics, with an increase of the Gait Profile Score. Significant differences were found in the kinematics of the ankles, knees and hips. Contractures of soleus cause a more important decrease in the range of motion at the ankle than the same degree of gastrocnemius contractures. Gastrocnemius contractures cause greater knee flexion (during the stance phase) and hip flexion (during all the gait cycle) than the same level of soleus contractures. These results can support the interpretation of the Clinical Gait Analysis data by providing a better understanding of the effect of isolate contracture of soleus and gastrocnemius on gait kinematics. Copyright © 2017 Elsevier B.V. All rights reserved.

Electron capture on 20Ne and the ultimate fate of stars in the mass range 8-10 M⊙

International Nuclear Information System (INIS)

Kirsebom, Oliver S.; Cederkall, Joakim; Jenkins, David G.; Joshi, Pankaj; Julin, Rauno; Kankainen, Anu; Trzaska, Wladyslaw H.; Kibedi, Tibor; Tengblad, Olof

2016-01-01

Knowledge of the electron-capture rate on 20 Ne is of critical importance to understand the final evolution of stars in the mass range 8-10M⊙. A recent study has highlighted the importance of the second-forbidden transition between the ground states of 20 Ne and 20 F, which is believed to dominate the capture rate in an important temperature-density range. The strength of this transition is, however, not well constrained, neither experimentally nor theoretically, making an experimental determination highly desirable. The transition strength can be determined from the branching ratio of the inverse transition in the decay of 20 F, for which the experimental upper limit is 10 -5 , while the most recent theoretical prediction is 1.3 x 10 -6 . To facilitate an experimental determination of the branching ratio we are refurbishing an intermediate-image magnetic spectrometer capable of focusing 7 MeV electrons, and designing a scintillator detector surrounded by an active cosmic-ray veto shield, which will serve as an energy- dispersive device at the focal plane. In this contribution, GEANT4 simulations of the expected performance of the setup will be presented and the astrophysical motivation for the experiment will be discussed. (author)

Pb solubility of the high-temperature superconducting phase Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+d}

Energy Technology Data Exchange (ETDEWEB)

Kaesche, S.; Majewski, P.; Aldinger, F. [Max-Planck-Institut fuer Metallforschung, Stuttgart (Germany)] [and others

1994-12-31

For the nominal composition of Bi{sub 2.27x}Pb{sub x}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+d} the lead content was varied from x=0.05 to 0.45. The compositions were examined between 830{degrees}C and 890{degrees}C which is supposed to be the temperature range over which the so-called 2223 phase (Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+d}) is stable. Only compositions between x=0.18 to 0.36 could be synthesized in a single phase state. For x>0.36 a lead containing phase with a stoichiometry of Pb{sub 4}(Sr,Ca){sub 5}CuO{sub d} is formed, for x<0.18 mainly Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+d} and cuprates are the equilibrium phases. The temperature range for the 2223 phase was found to be 830{degrees}C to 890{degrees}C but the 2223 phase has extremely varying cation ratios over this temperature range. Former single phase 2223 samples turn to multi phase samples when annealed at slightly higher or lower temperatures. A decrease in the Pb solubility with increasing temperature was found for the 2223 phase.

Range Extension Opportunities While Heating a Battery Electric Vehicle

Energy Technology Data Exchange (ETDEWEB)

Lustbader, Jason A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rugh, John P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Titov, Eugene V [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Meyer, John [Hanon Systems; Agathocleous, Nicos [Hanon Systems; Vespa, Antonio [Hyundai-Kia America Technical Center Inc.

2018-04-03

The Kia Soul battery electric vehicle (BEV) is available with either a positive temperature coefficient (PTC) heater or an R134a heat pump (HP) with PTC heater combination (1). The HP uses both ambient air and waste heat from the motor, inverter, and on-board-charger (OBC) for its heat source. Hanon Systems, Hyundai America Technical Center, Inc. (HATCI) and the National Renewable Energy Laboratory jointly, with financial support from the U.S. Department of Energy, developed and proved-out technologies that extend the driving range of a Kia Soul BEV while maintaining thermal comfort in cold climates. Improved system configuration concepts that use thermal storage and waste heat more effectively were developed and evaluated. Range extensions of 5%-22% at ambient temperatures ranging from 5 degrees C to -18 degrees C were demonstrated. This paper reviews the three-year effort, including test data of the baseline and modified vehicles, resulting range extension, and recommendations for future actions.

STOPOW/82 program for calculations of stopping powers and ranges for heavy ions in the energy range from 1 keV to 10 GeV/a.m.u

International Nuclear Information System (INIS)

Henniger, J.; Horlbeck, B.

1983-01-01

The program ST0POW/82 is created to calculate the stopping power and range of ions up to uranium in the energy range 1 keV/a. m. u. - 10 GeV/a. m. u. in any amorphous matter. The program is based on Ziegler's catalogue data and Ahlen's theoretical treatments. The Zsub(eff)sup(3) relativistic Bloch and Mott corrections and corrections on density effect are taken into account in the calculations. An opportunity of 9 different functions removal, derivative on the stopping power and range, for example, primary ionization and LET, and also of ion parameters, such as β, Zsub(eff)sup(2)/βsup(2) is foreseen. The program is written in FORTRAN language in version for the CDC-6500 computer. The program needs a minimized input also for compound targets. So it is useful for many problems in applied sciences and experimental physics

Search for anomalously interacting stable particles in the mass range from 1.0 to 1.8 GeV/c2

International Nuclear Information System (INIS)

Abramov, V.V.; Arbuzov, V.A.; Baldin, B.Yu.

1986-01-01

A search for stable (r > 10 -8 s) anomalously interacting particles with the charge Z=±1 has been performed in the mass range from 1.0 to 1.8 GeV/c 2 . Secondary positive and negative particles with mean transverse momentum of 3 GeV/c produced in the collision of 70 GeV protons with the lead target have been investigated. Upper limits for invariant differential production cross-sections of anomalously interacting particles (1.8x10 -33 -9.5x10 -32 cm 2 xGeV -2 ) per lead nucleus have been obtained at the 90 % considence level

Degree distribution in discrete case

International Nuclear Information System (INIS)

Wang, Li-Na; Chen, Bin; Yan, Zai-Zai

2011-01-01

Vertex degree of many network models and real-life networks is limited to non-negative integer. By means of measure and integral, the relation of the degree distribution and the cumulative degree distribution in discrete case is analyzed. The degree distribution, obtained by the differential of its cumulative, is only suitable for continuous case or discrete case with constant degree change. When degree change is not a constant but proportional to degree itself, power-law degree distribution and its cumulative have the same exponent and the mean value is finite for power-law exponent greater than 1. -- Highlights: → Degree change is the crux for using the cumulative degree distribution method. → It suits for discrete case with constant degree change. → If degree change is proportional to degree, power-law degree distribution and its cumulative have the same exponent. → In addition, the mean value is finite for power-law exponent greater than 1.

Martensite shear phase reversion-induced nanograined/ultrafine-grained Fe-16Cr-10Ni alloy: The effect of interstitial alloying elements and degree of austenite stability on phase reversion

Energy Technology Data Exchange (ETDEWEB)

Misra, R.D.K., E-mail: dmisra@louisiana.edu [Center for Structural and Functional Materials, University of Louisiana at Lafayette, Madison Hall Room 217, P.O. Box 44130, Lafayette, LA 70504-1430 (United States); Zhang, Z.; Venkatasurya, P.K.C. [Center for Structural and Functional Materials, University of Louisiana at Lafayette, Madison Hall Room 217, P.O. Box 44130, Lafayette, LA 70504-1430 (United States); Somani, M.C.; Karjalainen, L.P. [Department of Mechanical Engineering, University of Oulu, P.O. Box 4200, Oulu 90014 (Finland)

2010-11-15

Research highlights: {yields} Development of a novel process involving phase-reversion annealing process. {yields} Austensite stability strongly influences development of nanograined structure. {yields} Interstitial elements influence microstructural evolution during annealing. - Abstract: We describe here an electron microscopy study of microstructural evolution associated with martensitic shear phase reversion-induced nanograined/ultrafine-grained (NG/UFG) structure in an experimental Fe-16Cr-10Ni alloy with very low interstitial content. The primary objective is to understand and obtain fundamental insights on the influence of degree of austenite stability (Fe-16Cr-10Ni, 301LN, and 301 have different austenite stability index) and interstitial elements (carbon and nitrogen) in terms of phase reversion process, microstructural evolution during reversion annealing, and temperature-time annealing sequence. A relative comparison of Fe-16Cr-10Ni alloy with 301LN and 301 austenitic stainless steels indicated that phase reversion in Fe-16Cr-10Ni occurred by shear mechanism, which is similar to that observed for 301, but is different from the diffusional mechanism in 301LN steel. While the phase reversion in the experimental Fe-16Cr-10Ni alloy and 301 austenitic stainless steel occurred by shear mechanism, there were fundamental differences between these two alloys. The reversed strain-free austenite grains in Fe-16Cr-10Ni alloy were characterized by nearly same crystallographic orientation, where as in 301 steel there was evidence of break-up of martensite laths during reversion annealing resulting in several regions of misoriented austenite grains in 301 steel. Furthermore, a higher phase reversion annealing temperature range (800-900 deg. C) was required to obtain a fully NG/UFG structure of grain size 200-600 nm. The difference in the phase reversion and the temperature-time sequence in the three stages is explained in terms of Gibbs free energy change that

Effect of rolling temperature on 12Kh18N10T steel tube hardening

International Nuclear Information System (INIS)

Yushkevich, P.M.; Stepanovich, V.E.; Manankova, L.V.; Usenko, V.N.; Semenov, I.A.

1984-01-01

Mechanical properties and substructure of tubes at the constant reduction degree k(the ratio of deformation over wall thickness to deformation over diameter), depending on strain degree during cold and hot tube rolling, have been studied. The investigations are carried out using hot-rolled tubes with the dimensions 88x8 mm of 12Kh1hN10T steel. With the decrease of strain over the wall of the tube, produced of 12Kh18N10T steel as to strain over diameter the values of yield strength and ultimate strength increase with simultaneous decrease in ductility during warm rolling and yield strength and ultimate strength decrease with the increase in ductility-during cold rolling. During warm rolling of the tubes at 250 deg C the hardening of 12Kh18N10T steel is higher, than at the rolling temperature 150 deg C. The optimum temperature range of warm rolling is 120-150 deg C. Grain orientation in the metal of the tubes and degree of texture perfection increase with the temperature increase of the tube warm drolling as compared with col rolli

Large-angle inclusive production of charged pions at the CERN ISR with transverse momenta less than 1.0 GeV/c

CERN Document Server

Alper, B; Booth, P; Bulos, F; Carroll, L J; Damgaard, G; Duff, Brian G; Heymann, Franz F; Jackson, J N; Jarlskog, G; Jönsson, L B; Klovning, A; Leistam, L; Lillethun, E; Lynch, G; Ølgaard-Nielsen, S; Prentice, M; Quarrie, D; von Dardel, Guy F; Weiss, J M

1973-01-01

The inclusive production of pi /sup +or-/ in proton-proton collisions has been measured for the transverse momentum range 0.15 to 1.0 GeV/c over an angular range of 29 degrees to 89 degrees in the centre-of- mass system and for centre-of-mass energies square root s=30.6 and 52.8 GeV. For each energy the invariant cross-section for fixed transverse momentum was found to increase by about 15% as the centre- of-mass rapidity decreases from 1 to 0, i.e. the 'central plateau' has not yet been reached. (8 refs).

[The importance of master's degree and doctorate degree in general surgery].

Science.gov (United States)

Montalvo-Javé, Eduardo Esteban; Mendoza-Barrera, Germán Eduardo; Valderrama-Treviño, Alan Isaac; Alcántara-Medina, Stefany; Macías-Huerta, Nain Abraham; Tapia-Jurado, Jesús

2016-01-01

The Doctor of Philosophy is the highest academic degree that can be obtained in universities. Graduate Education Program in Medicine in Mexico is divided into 2 major categories: Medical Specialty and Master studies/Doctor of Philosophy. The objective of this study was to demonstrate the importance of master's degrees and Doctor of Philosophy in general surgery. A literature search in PubMed and Medline among others, from 1970 to 2015 with subsequent analysis of the literature reviews found. The physicians who conducted doctoral studies stand out as leaders in research, teaching and academic activities. Dual training with a doctorate medical specialty is a significant predictor for active participation in research projects within the best educational institutions. It is important to study a PhD in the education of doctors specialising in surgery, who show more training in teaching, research and development of academic activities. Currently, although there is a little proportion of students who do not finish the doctoral program, the ones who do are expected to play an important role in the future of medical scientific staff. It has been shown that most doctors with Doctor of Philosophy have wide range of career options. The importance of doctoral studies in the formation of general surgery is due to various reasons; the main one being comprehensively training physician scientists who can develop in clinical, teaching and research. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

The phase system Fe-Ir-S at 1100, 1000 and 800 degree C

DEFF Research Database (Denmark)

Makovicky, Emil; Karup-Møller, Sven

1999-01-01

Phase relations in the dry condensed Fe-Ir-S system were determined at 1100, 1000 and 800 degrees C. Orientational runs were performed at 500 degrees C. Between 1100 and 800 degrees C, the system comprises five sulphides and an uninterrupted field of gamma(Fe, Ir). Fe1-xS dissolves 5.8 at.% Ir...... at 1100 degrees C, 3.4 at.% Ir at 1000 degrees C and 1.0 at.% Ir at 800 degrees C. The solubility of Fe in Ir2S3, IrS2 and IrSsimilar to 3 increases with decreasing temperature, reaching 2.5 at.% in the latter two sulphides at 800 degrees C. Thiospinel 'FeIr2S4' is nonstoichiometric, from Fe22.3Ir19.8S58...

Retracted: Effect of Paris polyphylla extract on second- degree burns ...

African Journals Online (AJOL)

2018-01-26

Jan 26, 2018 ... Retracted: Ma Z, Yin W, Hu G, Zhu Z, Huang Z. Effect of Paris polyphylla extract on second-degree burns in rats. Trop J Pharm Res 2016; 15(10):2131-2135 doi: http://dx.doi.org/10.4314/tjpr.v15i10.11. From the Editor. Our attention was drawn to the falsification of the data published in this article which was ...

Determination of the normal range of thyroid hormones in Sudanese by locally produced reagents

International Nuclear Information System (INIS)

Ali, Nagi Ibrahim

1999-05-01

In this study serum samples have been collected from 100 volunteers in order to measure serum thyroxine (T 4 ) and serum triiodothyronine (T 3 ). The volunteers were selected carefully in the bases of the thyroid history as they should not complain of any thyroid disorders, no history of thyroid problems. They were males and females covering the range of 10-60 years old. Blood samples were collected, separated and the serum samples were kept frozen in (-20 degree C). Analysis of serum (T 4 and T 3 ) were carried out using sensitive radioimmunoassay (RIA) methods. The reagents were locally produced. The results were analysed by statistical package for social sciences (SPSS) computer program, which specially used for the determination of normal ranges and other medical statistics purposes

Mesonic and isobar degrees of freedom in nuclei

International Nuclear Information System (INIS)

Muether, H.

1978-01-01

A study is made in 16 O of the effects of mesonic and isobar degrees of freedom. Taking these degrees of freedom explicitly into account causes a change of the bare nucleon-nucleon (NN) interaction going from the description of the two-nucleon system (NN-scattering, deuteron) to the many-body system of complex nuclei. Three main effects are discussed: First, the mesonic degrees of freedom, taken into account in a noncovariant perturbation theory, introduce and additional density dependence into the NN interaction. In a Brueckner-Hartree-Fock calculation for 16 O this leads to an improvement of the radius with a small change of the energy. Second, fourth-order iterative diagrams involving NΔ-and ΔΔ-intermediate states give less medium range attraction in complex nuclei than a NN-potential which is also fitted to the NN-data but does not treat these terms explicitly. Third, effective three-N forces, caused by excitation of isobars, give rise to a small amount of attraction only. For 16 O the additional binding energy is only about 0.5 MeV per particle. (author)

Magma Proof of Strict Inequalities for Minimal Degrees of Finite Groups

OpenAIRE

Murray, Scott H.; Saunders, Neil

2009-01-01

The minimal faithful permutation degree of a finite group $G$, denote by $\\mu(G)$ is the least non-negative integer $n$ such that $G$ embeds inside the symmetric group $\\Sym(n)$. In this paper, we outline a Magma proof that 10 is the smallest degree for which there are groups $G$ and $H$ such that $\\mu(G \\times H) < \\mu(G)+ \\mu(H)$.

Undergraduate Perceptions of Value: Degree Skills and Career Skills

Science.gov (United States)

Galloway, Kyle W.

2017-01-01

Recent data suggests that of the UK students graduating with a degree in chemistry in 2015, only 18.9% continued to employment as "Science Professionals". While this shows the wide range of employment that is available for chemistry graduates, it also highlights the need for them to have relevant transferable skills, rather than just the…

Feasibility of novel four degrees of freedom capacitive force sensor for skin interface force

Directory of Open Access Journals (Sweden)

Murakami Chisato

2012-11-01

Full Text Available Abstract Background The objective of our study was to develop a novel capacitive force sensor that enables simultaneous measurements of yaw torque around the pressure axis and normal force and shear forces at a single point for the purpose of elucidating pressure ulcer pathogenesis and establishing criteria for selection of cushions and mattresses. Methods Two newly developed sensors (approximately 10 mm×10 mm×5 mm (10 and 20 mm×20 mm×5 mm (20 were constructed from silicone gel and four upper and lower electrodes. The upper and lower electrodes had sixteen combinations that had the function as capacitors of parallel plate type. The full scale (FS ranges of force/torque were defined as 0–1.5 N, –0.5-0.5 N and −1.5-1.5 N mm (10 and 0–8.7 N, –2.9-2.9 N and −16.8-16.8 N mm (20 in normal force, shear forces and yaw torque, respectively. The capacitances of sixteen capacitors were measured by an LCR meter (AC1V, 100 kHz when displacements corresponding to four degrees of freedom (DOF forces within FS ranges were applied to the sensor. The measurement was repeated three times in each displacement condition (10 only. Force/torque were calculated by corrected capacitance and were evaluated by comparison to theoretical values and standard normal force measured by an universal tester. Results In measurements of capacitance, the coefficient of variation was 3.23% (10. The Maximum FS errors of estimated force/torque were less than or equal to 10.1 (10 and 16.4% (20, respectively. The standard normal forces were approximately 1.5 (10 and 9.4 N (20 when pressure displacements were 3 (10 and 2 mm (20, respectively. The estimated normal forces were approximately 1.5 (10 and 8.6 N (10 in the same condition. Conclusions In this study, we developed a new four DOF force sensor for measurement of force/torque that occur between the skin and a mattress. In measurement of capacitance, the repeatability was good and it was confirmed that the sensor had

Relationship between 222Rn concentration in soil water and degree of saturation

International Nuclear Information System (INIS)

Hamada, Hiromasa; Komae, Takami

1996-01-01

The object of the researches an analyzing downward flow to groundwater using 222 Rn concentration in water as an indicator has been saturated flow. However, when groundwater table is low, downward flow from surface is unsaturated flow. In this paper, the authors represented the relationship between 222 Rn concentration in soil water and degree of saturation, and measured the vertical distributions of 222 Rn concentrations in groundwater and 222 Rn concentration in water table in the fields. As the results, it was found that 222 Rn concentrations in the vicinity of groundwater table decreased by unsaturated downward flow. Moreover, from the variation of 222 Rn concentrations in groundwater table, it was possible to show the occurrence of the unsaturated downward flow by paddy fields irrigation, i.e., the downward flow of the soil water pushed out by irrigation water, the unsaturated percolation in the irrigation period, and the redistribution of the soil water after the release of ponding water. The degree of saturation in downward flow was calculated to be about 50% from 222 Rn concentrations in the irrigation period and in the non-irrigation period. It was deduced that the value was within reasonable range considering the difference of the hydraulic conductivities between of the upper layer and of the lower layer. These results proved that the relationship between 222 Rn concentrations in soil water and degree of saturation represented by the authors was reasonable and that the analytical method using 222 Rn concentrations in groundwater table as an indicator was useful 10 analyze the actual stale of unsaturated downward flow. (author)

Prevalence of celiac disease among first-degree relatives of Indian celiac disease patients.

Science.gov (United States)

Mishra, Asha; Prakash, Shyam; Kaur, Gurvinder; Sreenivas, Vishnubhatla; Ahuja, Vineet; Gupta, Siddhartha Datta; Makharia, Govind K

2016-03-01

Celiac disease, once thought to be uncommon in Asia, is now recognized in Asian nations as well. We investigated the prevalence of celiac disease in first-degree relatives of celiac disease patients followed in our centre. First-degree relatives were screened prospectively for celiac disease using questionnaire-based interview and anti-tissue transglutaminase antibody. Serology positive first-degree relatives underwent duodenal biopsies. Diagnosis of celiac disease was made based on positive serology and villous abnormality Marsh grade 2 or higher. Human leucocyte antigen DQ2/-DQ8 was also assessed in 127 first-degree relatives. 434 first-degree relatives of 176 celiac disease patients were prospectively recruited; 282 were symptomatic (64.9%), 58 were positive for serology (13.3%). Seroprevalence was higher in female than in males (19% vs 8.5%; p=0.001) and highest in siblings (16.9%) than parents (13.6%) and children (5.9%) of celiac patients (p=0.055); 87.4% first-degree relatives were human leucocyte antigen-DQ2/-DQ8 positive. Overall prevalence of celiac disease was 10.9% amongst first-degree relatives. The prevalence of celiac disease in first-degree relatives of celiac disease patients was 10.9% in our cohort, and 87% had human leucocyte antigen-DQ2 or -DQ8 haplotype. All first-degree relatives of celiac disease patients should be screen for celiac disease even if asymptomatic or with atypical manifestations. Copyright © 2015 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

Paraconsistency properties in degree-preserving fuzzy logics

Czech Academy of Sciences Publication Activity Database

Ertola, R.; Esteva, F.; Flaminio, T.; Godo, L.; Noguera, Carles

2015-01-01

Roč. 19, č. 3 (2015), s. 531-546 ISSN 1432-7643 R&D Projects: GA ČR GAP202/10/1826 Institutional support: RVO:67985556 Keywords : Mathematical fuzzy logic * degree-preserving fuzzy logics * paraconsistent logics * logics of formal inconsistency Subject RIV: BA - General Mathematics Impact factor: 1.630, year: 2015 http://library.utia.cas.cz/separaty/2016/MTR/noguera-0469166.pdf

Belowground Plant–Herbivore Interactions Vary among Climate-Driven Range-Expanding Plant Species with Different Degrees of Novel Chemistry

Directory of Open Access Journals (Sweden)

Rutger A. Wilschut

2017-10-01

Full Text Available An increasing number of studies report plant range expansions to higher latitudes and altitudes in response to global warming. However, consequences for interactions with other species in the novel ranges are poorly understood. Here, we examine how range-expanding plant species interact with root-feeding nematodes from the new range. Root-feeding nematodes are ubiquitous belowground herbivores that may impact the structure and composition of natural vegetation. Because of their ecological novelty, we hypothesized that range-expanding plant species will be less suitable hosts for root-feeding nematodes than native congeneric plant species. In greenhouse and lab trials we compared nematode preference and performance of two root-feeding nematode species between range-expanding plant species and their congeneric natives. In order to understand differences in nematode preferences, we compared root volatile profiles of all range-expanders and congeneric natives. Nematode preferences and performances differed substantially among the pairs of range-expanders and natives. The range-expander that had the most unique volatile profile compared to its related native was unattractive and a poor host for nematodes. Other range-expanding plant species that differed less in root chemistry from native congeners, also differed less in nematode attraction and performance. We conclude that the three climate-driven range-expanding plant species studied varied considerably in their chemical novelty compared to their congeneric natives, and therefore affected native root-feeding nematodes in species-specific ways. Our data suggest that through variation in chemical novelty, range-expanding plant species may vary in their impacts on belowground herbivores in the new range.

Are range-size distributions consistent with species-level heritability?

DEFF Research Database (Denmark)

Borregaard, Michael Krabbe; Gotelli, Nicholas; Rahbek, Carsten

2012-01-01

The concept of species-level heritability is widely contested. Because it is most likely to apply to emergent, species-level traits, one of the central discussions has focused on the potential heritability of geographic range size. However, a central argument against range-size heritability has...... been that it is not compatible with the observed shape of present-day species range-size distributions (SRDs), a claim that has never been tested. To assess this claim, we used forward simulation of range-size evolution in clades with varying degrees of range-size heritability, and compared the output...

[Study of the reineta protein modifications (Brama australis), put under freezing and storage to -18 degrees C and -30 degrees C].

Science.gov (United States)

Abugoch, Lilian; Quitral, Vilma; Larraín, M Angélica; Vinagre, Julia; Kriukov, Andrei; Chávez, Gloria

2006-12-01

The objective of the present work was to study functional and thermal properties of reineta (Brama australis) frozen meat, analysed by water retention capacity (WRC), gel forming capacity (GFC), texture, emulsifying capacity and differential scanning calorimetry (DSC). For this study, reineta fillets were obtained and extracted by the same conditions, and cutted, packaged, frozen and stored at -18 degrees C and -30 degrees C for 7 months. The results obtained, showed that there were no signifficant differences in the responses to thermal treatment for all the specimens. For samples frozen at -18 degrees C and -30 degrees C, the protein contents were 23.5 + 0.0 and 25.4 + 1.0%, respectively. The WRC values were 0.45 + 0.1 and 1.59 +/- 0.0 g water/g protein, respectively. The gel forming capacity was only present in the fresh samples, whereas the frozen stored ones only form protein aggregates. The emulsifying capacity was between 960 and 1400 g oil / g protein, and the storage time increased this value. The miosin denaturation temperature (Td) and denaturation enthalpy (?H), obtained by DSC, fluctuated between 39.2 +/- 0.5 to 44.8 +/- 0.8 degrees C and 1.12 +/- 0.3 to 0.52 +/- 0.2 J/g, respectively. The actina values were between 71.0 +/- 0.6 to 75.3 +/- 0.5 degrees C and between 0.5 +/- 0.1 to 0.7 +/- 0.1 J/g. Cooperativity decreased as the storage time increased. This is showing a certain degree of protein displacement. The values found by thermal analyses showed a direct relationship with the functional properties, both decreasing with storage time.

Isospin-breaking nuclear forces with delta degrees of freedom

International Nuclear Information System (INIS)

Epelbaum, E.

2008-01-01

The leading contributions to the isospin-violating (IV) two- and three-nucleon forces in effective field theory with explicit delta degrees of freedom are discussed. Presented at the 20th Few-Body Conference, Pisa, Italy, 10-14 September 2007. (author)

Effect of particle size on mixing degree in dispensation.

Science.gov (United States)

Nakamura, Hitoshi; Yanagihara, Yoshitsugu; Sekiguchi, Hiroko; Ohtani, Michiteru; Kariya, Satoru; Uchino, Katsuyoshi; Suzuki, Hiroshi; Iga, Tatsuji

2004-03-01

By using lactose colored with erythrocin, we examined the effect of particle size on mixing degree during the preparation of triturations with a mortar and pestle. We used powders with different distributions of particle sizes, i.e., powder that passed through 32-mesh but was trapped on a 42-mesh sieve (32/42-mesh powder), powder that passed through a 42-mesh sieve but was trapped on a 60-mesh sieve (42/60-mesh powder), powder that passed through a 60-mesh sieve but was trapped on a 100-mesh sieve (60/100-mesh powder), and powder that passes through a 100-mesh sieve (> 100-mesh powder). The mixing degree of colored powder and non-colored powder whose distribution of particle sizes was the same as that of the colored powder was excellent. The coefficient of variation (CV) value of the mixing degree was 6.08% after 40 rotations when colored powder was mixed with non-colored powder that both passed through a 100-mesh sieve. The CV value of the mixing degree was low in the case of mixing of colored and non-colored powders with different particle size distributions. After mixing, about 50% of 42/60-mesh powder had become smaller particles, whereas the distribution of particle sizes was not influenced by the mixing of 60/100-mesh powder. It was suggested that the mixing degree is affected by distribution of particle sizes. It may be important to determine the mixing degrees for drugs with narrow therapeutic ranges.

Mechatronic design of a fast and long range 4 degrees of freedom humanoid neck

NARCIS (Netherlands)

Brouwer, Dannis Michel; Bennik, J.; Leideman, J.; Soemers, Herman; Stramigioli, Stefano

2009-01-01

This paper describes the mechatronic design of a humanoid neck. To research human machine interaction, the head and neck combination should be able to approach the human behavior as much as possible. We present a novel humanoid neck concept that is both fast, and has a long range of motion in 4

Neutron capture resonances in 56Fe and 58Fe in the energy range from 10 to 100 keV

International Nuclear Information System (INIS)

Kaeppeler, F.; Wisshak, K.; Hong, L.D.

1982-11-01

The neutron capture cross section of 56 Fe and 58 Fe has been measured in the energy range from 10 to 250 keV relative to the gold standard. A pulsed 3 MV Van de Graaff accelerator and the 7 Li(p, n) reaction served as a neutron source. Capture gamma rays were detected by two C 6 D 6 detectors, which were operated in coincidence and anticoincidence mode. Two-dimensional data acquisition allowed to apply the pulse height weighting technique off-line. The samples were located at a flight path of 60 cm. The total time resolution was 1.2 ns thus allowing for an energy resolution of 2 ns/m. The experimental set-up was optimized with respect to low background and low neutron sensitivity. The additional flight path of 4 cm from the sample to the detector was sufficient to discriminate capture of sample scattered neutrons by the additional time of flight. In this way reliable results were obtained even for the strong s-wave resonances of both isotopes. The experimental capture yield was analyzed with the FANAC code. The energy resolution allowed to extract resonance parameters in the energy range from 10 to 100 keV. The individual systematic uncertainties of the experimental method are discussed in detail. They were found to range between 5 and 10% while the statistical uncertainty is 3-5% for most of the resonances. A comparison to the results of other authors exhibits in case of 56 Fe systematic differences of 7-11%. For 58 Fe the present results differ up to 50% from the only other measurement for this isotope. (orig.) [de

The Challenges of Introducing a Generic Graduate Skills Unit into a Business Degree in Malaysia

Science.gov (United States)

Stein, Andrew; Licciardi, Raquel

2012-01-01

The School of Management and Information Systems at Victoria University Australia resides within the Business Faculty and has a range of Management and Information Systems degrees. In 2008 all degree programs in the Business Faculty introduced a compulsory generic graduate skills unit that focussed on problem-solving, critical thinking,…

Modeling interacting dynamic networks: I. Preferred degree networks and their characteristics

International Nuclear Information System (INIS)

Liu, Wenjia; Schmittmann, Beate; Zia, R K P; Jolad, Shivakumar

2013-01-01

We study a simple model of dynamic networks, characterized by a set preferred degree, κ. Each node with degree k attempts to maintain its κ and will add (cut) a link with probability w(k;κ) (1 − w(k;κ)). As a starting point, we consider a homogeneous population, where each node has the same κ, and examine several forms of w(k;κ), inspired by Fermi–Dirac functions. Using Monte Carlo simulations, we find the degree distribution in the steady state. In contrast to the well known Erdős–Rényi network, our degree distribution is not a Poisson distribution; yet its behavior can be understood by an approximate theory. Next, we introduce a second preferred degree network and couple it to the first by establishing a controllable fraction of inter-group links. For this model, we find both understandable and puzzling features. Generalizing the prediction for the homogeneous population, we are able to explain the total degree distributions well, but not the intra- or inter-group degree distributions. When monitoring the total number of inter-group links, X, we find very surprising behavior. X explores almost the full range between its maximum and minimum allowed values, resulting in a flat steady-state distribution, reminiscent of a simple random walk confined between two walls. Both simulation results and analytic approaches will be discussed. (paper)

X-ray diffraction study of the fine structure of twaron fibres in the temperature range 750 kelvin - 9500 kelvin

International Nuclear Information System (INIS)

Abu Obaid, A. A.

1991-01-01

The thesis dealt with the fine structural behaviour of twaron fibres, spun from the polymer poly (p-phenylene terephthalamide), due to physical treatments in the temperature range 75 to 984 kelvin (-198 to 675 degrees celsius). The treatments were annealing, cooling, cold ageing and vibratory milling. The structure was characterized by wide-angle x-ray diffraction (WAXS) and thermogravimetric analysis (TGA). The structural parameters included crystallinity, microparacrystal (mPc) sizes, net plane spacings, unit cell dimensions and mass stability. The TGA results indicated good mass stability up to 500 degrees celsius. The crystallinity and mPc sizes reached their maximum values after annealing the fibres at 425 degrees celsius (crystallinity increased by 5% and mPC sizes increased by approximately 40 to 50 %). After 500 degrees celsius, the crystallinity and mPC sizes dropped remarkably. Cooling the twaron fibres down to -198 degrees celsius did not affect the structure. Cold ageing of the fibres at -15 degrees celsius for periods up to 100 days, and cold ageing at -198 degrees celsius up to 48 hours did not affect the structure as well; however cold ageing at -198 degrees celsius for 120 hours caused a drop of 5% in the crystallinity and 10% in the mPc sizes. 35 refs., 28 figs., 9 tabs. (A.M.H.)

Phase-matching properties of BaGa4Se7 for SHG and SFG in the 0.901-10.5910  μm range.

Science.gov (United States)

Kato, Kiyoshi; Miyata, Kentaro; Petrov, Valentin

2017-04-10

We report new experimental results on the phase-matching properties of a BaGa4Se7 crystal for harmonic generation of a Nd:YAG laser-pumped AgGaS2 optical parametric oscillator (OPO) and a CO2 laser in the 0.901-10.5910 μm range. In addition, we present new Sellmeier equations that provide a good reproduction of the present experimental results as well as the published data points for a Nd:YAG laser-pumped OPO and an optical parametric amplifier (OPA) in the 3.10-15.22 μm range and a Ho:YAG laser-pumped OPA in the 3.49-5.18 μm range.

PM(10) episodes in Greece: Local sources versus long-range transport-observations and model simulations.

Science.gov (United States)

Matthaios, Vasileios N; Triantafyllou, Athanasios G; Koutrakis, Petros

2017-01-01

Periods of abnormally high concentrations of atmospheric pollutants, defined as air pollution episodes, can cause adverse health effects. Southern European countries experience high particulate matter (PM) levels originating from local and distant sources. In this study, we investigated the occurrence and nature of extreme PM 10 (PM with an aerodynamic diameter ≤10 μm) pollution episodes in Greece. We examined PM 10 concentration data from 18 monitoring stations located at five sites across the country: (1) an industrial area in northwestern Greece (Western Macedonia Lignite Area, WMLA), which includes sources such as lignite mining operations and lignite power plants that generate a high percentage of the energy in Greece; (2) the greater Athens area, the most populated area of the country; and (3) Thessaloniki, (4) Patra, and (5) Volos, three large cities in Greece. We defined extreme PM 10 pollution episodes (EEs) as days during which PM 10 concentrations at all five sites exceeded the European Union (EU) 24-hr PM 10 standards. For each EE, we identified the corresponding prevailing synoptic and local meteorological conditions, including wind surface data, for the period from January 2009 through December 2011. We also analyzed data from remote sensing and model simulations. We recorded 14 EEs that occurred over 49 days and could be grouped into two categories: (1) Local Source Impact (LSI; 26 days, 53%) and (2) African Dust Impact (ADI; 23 days, 47%). Our analysis suggested that the contribution of local sources to ADI EEs was relatively small. LSI EEs were observed only in the cold season, whereas ADI EEs occurred throughout the year, with a higher frequency during the cold season. The EEs with the highest intensity were recorded during African dust intrusions. ADI episodes were found to contribute more than local sources in Greece, with ADI and LSI fraction contribution ranging from 1.1 to 3.10. The EE contribution during ADI fluctuated from 41 to 83 �

50 CFR 30.1 - Surplus range animals.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Surplus range animals. 30.1 Section 30.1... NATIONAL WILDLIFE REFUGE SYSTEM RANGE AND FERAL ANIMAL MANAGEMENT Range Animals § 30.1 Surplus range animals. Range animals on fenced wildlife refuge areas, including buffalo and longhorn cattle, determined...

Nuclear statistics of dysprosium resonance parameters in the energy range 10 - 1000 eV

International Nuclear Information System (INIS)

Shin, S. G.; Kye, Y. U.; Cho, M. H.; Kim, G. N.; Namkung, W.; Lee, M. W.; Kang, Y. R.; Roe, T. I.

2016-01-01

A resonance parameter analysis is often performed in the Resolved Resonance Region (RRR) in order to estimate the average level spacing, distribution of the reduced widths and so on. Neutron Capture experiments on dysprosium isotopes were performed at the electron linear accelerator (LINAC) facility of the Rensselear Polytechnic Institute (RPI) in the neutron energy region from 10 eV to 1 keV. The following nuclear statistics of the resonance parameters will be discussed in this paper. The D 0 for 161 Dy and 163 Dy were judged to be constant up to 120.6 and 163.9 eV, respectively. It was assumed that the D 0 of 162 Dy and 164 Dy is constant up to 1000 eV because they have few resonances. The results were compared with the values from Reference 11 as shown in Figure 1. Statistical distributions of reduced neutron were investigated for the three isotopes in the region from 0 to 1000 eV; 161 Dy, 162 Dy, and 163 Dy, but not for 164 Dy because of a few number of resonances. The reduced neutron widths Γ n 0 were divided by the unweighted average reduced neutron width < Γ n 0 > for each isotope. A cumulative distribution of these unitless ratios is compared with the integral of the Porter-Thomas distribution (χ 2 distribution with one degree of freedom). The results agree reasonably with the Porter Thomas distributions.

Precision Lunar Laser Ranging For Lunar and Gravitational Science

Science.gov (United States)

Merkowitz, S. M.; Arnold, D.; Dabney, P. W.; Livas, J. C.; McGarry, J. F.; Neumann, G. A.; Zagwodzki, T. W.

2008-01-01

Laser ranging to retroreflector arrays placed on the lunar surface by the Apollo astronauts and the Soviet Lunar missions over the past 39 years have dramatically increased our understanding of gravitational physics along with Earth and Moon geophysics, geodesy, and dynamics. Significant advances in these areas will require placing modern retroreflectors and/or active laser ranging systems at new locations on the lunar surface. Ranging to new locations will enable better measurements of the lunar librations, aiding in our understanding of the interior structure of the moon. More precise range measurements will allow us to study effects that are too small to be observed by the current capabilities as well as enabling more stringent tests of Einstein's theory of General Relativity. Setting up retroreflectors was a key part of the Apollo missions so it is natural to ask if future lunar missions should include them as well. The Apollo retroreflectors are still being used today, and nearly 40 years of ranging data has been invaluable for scientific as well as other studies such as orbital dynamics. However, the available retroreflectors all lie within 26 degrees latitude of the equator, and the most useful ones within 24 degrees longitude of the sub-earth meridian. This clustering weakens their geometrical strength.

Sup(10)Be variation in surficial sediments of the Central Indian Basin

Digital Repository Service at National Institute of Oceanography (India)

Nath, B.N.; Aldahan, A.; Possnert, G.; Selvaraj, K.; Mascarenhas-Pereira, M.B.L.; Chen, C.T.A.

Distribution of 10Be in systematically collected (degree + degree interval at 10 to 16 degrees S; 73.5 to 76.5 degrees E) surficial siliceous ooze, siliceous clay and pelagic clay sediments (top 2 cm) from the abyssal Central Indian Basin...

Perceptions of Women and Men Leaders Following 360-Degree Feedback Evaluations

Science.gov (United States)

Pfaff, Lawrence A.; Boatwright, Karyn J.; Potthoff, Andrea L.; Finan, Caitlin; Ulrey, Leigh Ann; Huber, Daniel M.

2013-01-01

In this study, researchers used a customized 360-degree method to examine the frequency with which 1,546 men and 721 women leaders perceived themselves and were perceived by colleagues as using 10 relational and 10 task-oriented leadership behaviors, as addressed in the Management-Leadership Practices Inventory (MLPI). As hypothesized, men and…

Extreme embrittlement of austenitic stainless steel irradiated to 75-81 dpa at 335-360{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Porollo, S.I.; Vorobjev, A.N.; Konobeev, Yu.V. [Institute of Physics and Power Engineering, Obninsk (Russian Federation)] [and others

1997-04-01

It is generally accepted that void swelling of austenitic steels ceases below some temperature in the range 340-360{degrees}C, and exhibits relatively low swelling rates up to {approximately}400{degrees}C. This perception may not be correct at all irradiation conditions, however, since it was largely developed from data obtained at relatively high displacement rates in fast reactors whose inlet temperatures were in the range 360-370{degrees}C. There is an expectation, however, that the swelling regime can shift to lower temperatures at low displacement rates via the well-known {open_quotes}temperature shift{close_quotes} phenomenon. It is also known that the swelling rates at the lower end of the swelling regime increase continuously at a sluggish rate, never approaching the terminal 1%/dpa level within the duration of previous experiments. This paper presents the results of an experiment conducted in the BN-350 fast reactor in Kazakhstan that involved the irradiation of argon-pressurized thin-walled tubes (0-200 MPa hoop stress) constructed from Fe-16Cr-15Ni-3Mo-Nb stabilized steel in contact with the sodium coolant, which enters the reactor at {approx}270{degrees}C. Tubes in the annealed condition reached 75 dpa at 335{degrees}C, and another set in the 20% cold-worked condition reached 81 dpa at 360{degrees}C. Upon disassembly all tubes, except those in the stress-free condition, were found to have failed in an extremely brittle fashion. The stress-free tubes exhibited diameter changes that imply swelling levels ranging from 9 to 16%. It is expected that stress-enhancement of swelling induced even larger swelling levels in the stressed tubes.

Extreme embrittlement of austenitic stainless steel irradiated to 75-81 dpa at 335-360 degrees C

International Nuclear Information System (INIS)

Porollo, S.I.; Vorobjev, A.N.; Konobeev, Yu.V.

1997-01-01

It is generally accepted that void swelling of austenitic steels ceases below some temperature in the range 340-360 degrees C, and exhibits relatively low swelling rates up to ∼400 degrees C. This perception may not be correct at all irradiation conditions, however, since it was largely developed from data obtained at relatively high displacement rates in fast reactors whose inlet temperatures were in the range 360-370 degrees C. There is an expectation, however, that the swelling regime can shift to lower temperatures at low displacement rates via the well-known open-quotes temperature shiftclose quotes phenomenon. It is also known that the swelling rates at the lower end of the swelling regime increase continuously at a sluggish rate, never approaching the terminal 1%/dpa level within the duration of previous experiments. This paper presents the results of an experiment conducted in the BN-350 fast reactor in Kazakhstan that involved the irradiation of argon-pressurized thin-walled tubes (0-200 MPa hoop stress) constructed from Fe-16Cr-15Ni-3Mo-Nb stabilized steel in contact with the sodium coolant, which enters the reactor at ∼270 degrees C. Tubes in the annealed condition reached 75 dpa at 335 degrees C, and another set in the 20% cold-worked condition reached 81 dpa at 360 degrees C. Upon disassembly all tubes, except those in the stress-free condition, were found to have failed in an extremely brittle fashion. The stress-free tubes exhibited diameter changes that imply swelling levels ranging from 9 to 16%. It is expected that stress-enhancement of swelling induced even larger swelling levels in the stressed tubes

Why do different people choose different university degrees? Motivation and the choice of degree

Directory of Open Access Journals (Sweden)

Anya eSkatova

2014-11-01

Full Text Available Different people choose which undergraduate degree to study at the university for different reasons. To date, there have been limited attempts to identify individual differences in motivation that drive the undergraduate degree choice. We identified that people choose university degrees for four reasons: career concerns (Career, intrinsic interest (Interest in the subject, an opportunity to help others (Helping and because they are looking for an easy option into higher education (Loafing. We investigated whether these motivation apply to the choice of undergraduate degree in two samples: (1 undergraduate (N = 989 and (2 prospective (N = 896 students. We developed the Motivations Influencing Course Choice (MICC questionnaire to measure these motivations. Scales of Helping, Career, Loafing and Interest showed good psychometric properties, showed validity with respect to general life goals and personality traits, and predicted actual and prospective degree choices. We demonstrated that medical degrees were chosen due to a mixture of Helping and Career, while engineering degrees were associated with Career and low interest in the degree. The choice of art and humanities degrees was driven by Interest and low concern about future career, accompanied with high Loafing. We also demonstrated gender differences: females were high in Helping (both samples and Interest (only in undergraduate sample motivation, while males scored higher in Career (only in undergraduate sample and Loafing (both samples. The findings can feed into both theoretical accounts of proximal motivation as well as help to improve degree programmes at universities and provide better career advice.

Why do different people choose different university degrees? Motivation and the choice of degree.

Science.gov (United States)

Skatova, Anya; Ferguson, Eamonn

2014-01-01

Different people choose undergraduate degrees to study at university for different reasons. To date, there have been limited attempts to identify individual differences in motivation that drive undergraduate degree choice. We identified that people choose university degrees for four reasons: career concerns (Career), intrinsic interest in the subject (Interest), an opportunity to help others (Helping) and because they are looking for an easy option to get into higher education (Loafing). We investigated whether these motivations apply to the choice of undergraduate degree in two samples: (1) undergraduate (N = 989) and (2) prospective (N = 896) students. We developed the Motivations Influencing Course Choice (MICC) questionnaire to measure these motivations. Scales of Helping, Career, Loafing, and Interest showed good psychometric properties, showed validity with respect to general life goals and personality traits, and predicted actual and prospective degree choices. We demonstrated that medical degrees were chosen due to a mixture of Helping and Career, while engineering degrees were associated with Career and low Interest in the degree. The choice of arts and humanities degrees was driven by Interest and low concern about future career, accompanied with high Loafing. We also demonstrated gender differences: females were high in Helping (both samples) and Interest (only in the undergraduate sample) motivation, while males scored higher in Career (only in the undergraduate sample) and Loafing (both samples). The findings can feed into both theoretical accounts of proximal motivation as well as provide help to improve degree programmes at universities and support better career advice.

Oxidation between 1000 degrees C and 1600 degrees C and limiting criteria for the use of Zr-doped β-NiAl and β/γ alloys

International Nuclear Information System (INIS)

Doychak, J.; Barrett, C.A.; Smialek, J.L.

1989-01-01

This paper reports the isothermal and cyclic oxidation behavior of Zr-doped β-NiAl and β/γ' intermetallic alloys studied over the temperature range 1000 degrees C-1600 degrees C. Isothermal scale growth was governed by γ-Al 2 O 3 growth kinetics. The scale growth rates showed no monotonic trends with alloy aluminum content, although the stoichiometric β-NiAl alloy had the slowest kinetics. Cyclic oxidation at 1200 degrees C for 1000, 1-hr cycles of alloys having less than approximately 40 at %Al was poor due to the formation of martensite and less protective Ni-containing oxides. The cyclic oxidation behavior of Zr-doped stoichiometric β-NiAl was poor beyond 100, 1-hr cycles at 1425 degrees C. Computer modeling of the cyclic oxidation results was performed to arrive at limiting criteria for alloy service life. The limiting criteria were based on alloy aluminum depletion by oxidation that is necessary for less protective Ni-containing oxide formation. The modelling and lifetime criteria were applied to the cyclic oxidation of a Ni-50.2Al-0.04Zr (at%) alloy

High-degree Gravity Models from GRAIL Primary Mission Data

Science.gov (United States)

Lemoine, Frank G.; Goossens, Sander J.; Sabaka, Terence J.; Nicholas, Joseph B.; Mazarico, Erwan; Rowlands, David D.; Loomis, Bryant D.; Chinn, Douglas S.; Caprette, Douglas S.; Neumann, Gregory A.;

Early results of surgical intervention for elbow deformity in cerebral palsy based on degree of contracture.

Science.gov (United States)

Carlson, Michelle G; Hearns, Krystle A; Inkellis, Elizabeth; Leach, Michelle E

2012-08-01

Elbow flexion posture, caused by spasticity of the muscles on the anterior surface of the elbow, is the most common elbow deformity seen in patients with cerebral palsy. This study retrospectively evaluated early results of 2 surgical interventions for elbow flexion deformities based on degree of contracture. We hypothesized that by guiding surgical treatment to degree of preoperative contracture, elbow extension and flexion posture angle at ambulation could be improved while preserving maximum flexion. Eighty-six patients (90 elbows) were treated for elbow spasticity due to cerebral palsy. Seventy-one patients (74 elbows) were available for follow-up. Fifty-seven patients with fixed elbow contractures less than 45° were surgically treated with a partial elbow muscle lengthening, which included partial lengthening of the biceps and brachialis and proximal release of the brachioradialis. Fourteen patients (17 elbows) with fixed elbow contractures ≥ 45° had a more extensive full elbow release, with biceps z-lengthening, partial brachialis myotomy, and brachioradialis proximal release. Age at surgery averaged 10 years (range, 3-20 y) for partial lengthening and 14 years (range, 5-20 y) for full elbow release. Follow-up averaged 22 months (range, 7-144 mo) for partial lengthening and 18 months (range, 6-51 mo) for full elbow release. Both groups achieved meaningful improvement in flexion posture angle at ambulation, active and passive extension, and total range of motion. Elbow flexion posture angle at ambulation improved by 57° and active extension increased 17° in the partial lengthening group, with a 4° loss of active flexion. In the full elbow release group, elbow flexion posture angle at ambulation improved 51° and active extension improved 38°, with a loss of 19° of active flexion. Surgical treatment of spastic elbow flexion in cerebral palsy can improve deformity. We obtained excellent results by guiding the surgical intervention by the amount of

Importance of small-degree nodes in assortative networks with degree-weight correlations

Science.gov (United States)

Ma, Sijuan; Feng, Ling; Monterola, Christopher Pineda; Lai, Choy Heng

2017-10-01

It has been known that assortative network structure plays an important role in spreading dynamics for unweighted networks. Yet its influence on weighted networks is not clear, in particular when weight is strongly correlated with the degrees of the nodes as we empirically observed in Twitter. Here we use the self-consistent probability method and revised nonperturbative heterogenous mean-field theory method to investigate this influence on both susceptible-infective-recovered (SIR) and susceptible-infective-susceptible (SIS) spreading dynamics. Both our simulation and theoretical results show that while the critical threshold is not significantly influenced by the assortativity, the prevalence in the supercritical regime shows a crossover under different degree-weight correlations. In particular, unlike the case of random mixing networks, in assortative networks, the negative degree-weight correlation leads to higher prevalence in their spreading beyond the critical transmissivity than that of the positively correlated. In addition, the previously observed inhibition effect on spreading velocity by assortative structure is not apparent in negatively degree-weight correlated networks, while it is enhanced for that of the positively correlated. Detailed investigation into the degree distribution of the infected nodes reveals that small-degree nodes play essential roles in the supercritical phase of both SIR and SIS spreadings. Our results have direct implications in understanding viral information spreading over online social networks and epidemic spreading over contact networks.

Non-Technical Skills in Undergraduate Degrees in Business: Development and Transfer

Science.gov (United States)

Jackson, Denise; Hancock, Phil

2010-01-01

The development of discipline-specific skills and knowledge is no longer considered sufficient in graduates of Bachelor level degrees in Business. Higher education providers are becoming increasingly responsible for the development of a generic skill set deemed essential in undergraduates. This required skill set comprises a broad range of…

Modified Pauwels' intertrochanteric osteotomy in neglected femoral neck fractures in children: a report of 10 cases followed for a minimum of 5 years.

Science.gov (United States)

Magu, Narender Kumar; Singh, Roop; Sharma, Ashwini Kumar; Ummat, Vikas

2007-04-01

To evaluate the role of a modified Pauwels' intertrochanteric osteotomy (MPIO) in neglected femoral neck fractures in children. Prospective study with retrospective analysis. Tertiary care Postgraduate Institute of Medical Sciences. Ten children (8 males, 2 females) with an average age of 10.2 years with neglected femoral neck fractures were seen from 1990 to 1998. A femoral neck fracture was considered neglected when no proper medical treatment was instituted for at least 1 month following the fracture. Nonunion was accompanied by coxa vara and resorption of the femoral neck in 9 patients; a 10th patient had a neglected femoral neck fracture for 1 month without coxa vara. Three patients at time of presentation with Delbet Type II displaced fractures with associated nonunion and coxa vara (2 with Ratliff Type III and 1 with Type I) also had avascular necrosis using plain radiographic criteria of increased density. Modified Pauwels' intertrochanteric osteotomy. The children were immobilized in a hip spica for 6-10 weeks postoperatively and weightbearing was started after hip spica removal. Fracture healing, neck-shaft angle, avascular necrosis, and functional outcome. Patients were followed for an average of 8.2 years (range 5-12 years). All patients had union of their fracture within an average of 16.6 weeks (12-20 weeks) and of the osteotomy site within 8.2 weeks (7-9 weeks). Radiologic signs of avascular necrosis disappeared completely in the 3 patients who presented with avascular necrosis. In 1 patient with a preoperatively viable femoral head, radiologic signs of Ratliff Type I avascular necrosis appeared between 60 and 98 weeks. This radiologic finding became normal again, indicating viability of the femoral head somewhere between 98 to 205 weeks of follow-up. Postoperatively, an average of 135-degree neck-shaft angle was achieved (range 125-160 degrees). The average preoperative neck-shaft angle was 104.4 degrees (range 92-120 degrees) and on the normal hip

A study of the higher excitation levels of 11B via the 10B(n,n)10B and 10B(n,n')10B*(0.72, 1.74, 2.15, 3.59, 4.77 MeV) reactions

International Nuclear Information System (INIS)

Sadowski, E.T.

1988-11-01

As part of the study of the higher energy-level structure of 11 B, cross sections for elastic and inelastic scattering of neutrons from isotopically enriched 10 B samples have been measured for incident neutron energies from 3.03 MeV to 6.45 MeV in 250 keV increments and from 7.02 MeV to 12.01 MeV in 500 keV increments. Inelastic angular distributions for scattering to the states in parentheses in 10 B have been measured from the indicated energy up to 12.01 MeV; (0.718) from 3.02 MeV; (1.74) from 3.27 MeV; (2.15) from 3.77 MeV; (3.59) from 5.52 MeV; (4.77) from 7.02 MeV. The measurements at 3.02, 3.51, 4.02, and 4.51 MeV were done at nine laboratory angles from 20/degree/ to 158/degree/ in 17.5/degree/ increments with a sample that is isotopically 95.86% 10 B. All other distributions measured scattering at 11 laboratory angles from 18/degree/ to 158/degree/ in 15/degree/ increments from a sample that is isotopically 99.49% 10 B. The data are corrected for air scattering, sample attenuation, minor isotope impurity, multiple scattering, and elastic and inelastic scattering from the sample of the neutron source continuum and contaminants. An eight-channel, multilevel R-matrix analysis was performed on the data. Level energies, spins, and parities were deduced for twelve levels above 13 MeV excitation in 11 B. Only two definite and three tentative assignments for T = /1/2/ levels had been made previously above 13 MeV. The two definite levels were confirmed. Good agreement between the data and the R-matrix calculation in all analyzed channels was obtained for the proposed structure. 122 refs., 40 figs., 7 tabs

SU-F-J-206: Systematic Evaluation of the Minimum Detectable Shift Using a Range- Finding Camera

Energy Technology Data Exchange (ETDEWEB)

Platt, M; Platt, M [College of Medicine University of Cincinnati, Cincinnati, OH (United States); Lamba, M [University of Cincinnati, Cincinnati, OH (United States); Mascia, A [University of Cincinnati Medical Center, Cincinnati, OH (United States); Huang, K [UC Health Barret Cancer Center, Cincinnati, OH (United States)

2016-06-15

Purpose: The robotic table used for patient alignment in proton therapy is calibrated only at commissioning under well-defined conditions and table shifts may vary over time and with differing conditions. The purpose of this study is to systematically investigate minimum detectable shifts using a time-of-flight (TOF) range-finding camera for table position feedback. Methods: A TOF camera was used to acquire one hundred 424 × 512 range images from a flat surface before and after known shifts. Range was assigned by averaging central regions of the image across multiple images. Depth resolution was determined by evaluating the difference between the actual shift of the surface and the measured shift. Depth resolution was evaluated for number of images averaged, area of sensor over which depth was averaged, distance from camera to surface, central versus peripheral image regions, and angle of surface relative to camera. Results: For one to one thousand images with a shift of one millimeter the range in error was 0.852 ± 0.27 mm to 0.004 ± 0.01 mm (95% C.I.). For varying regions of the camera sensor the range in error was 0.02 ± 0.05 mm to 0.47 ± 0.04 mm. The following results are for 10 image averages. For areas ranging from one pixel to 9 × 9 pixels the range in error was 0.15 ± 0.09 to 0.29 ± 0.15 mm (1σ). For distances ranging from two to four meters the range in error was 0.15 ± 0.09 to 0.28 ± 0.15 mm. For an angle of incidence between thirty degrees and ninety degrees the average range in error was 0.11 ± 0.08 to 0.17 ± 0.09 mm. Conclusion: It is feasible to use a TOF camera for measuring shifts in flat surfaces under clinically relevant conditions with submillimeter precision.

Nuclear diffuseness as a degree of freedom

Science.gov (United States)

Myers, W. D.; ŚwiaŢecki, W. J.

1998-12-01

The response of the nuclear energy to changes in neutron and proton surface diffusenesses is investigated using the Thomas-Fermi model. Algebraic expressions are provided for the energy cost of changing the two diffusenesses away from their equilibrium values. This will make it possible to generalize the macroscopic-microscopic calculations of nuclear masses and deformation energies by the inclusion of the neutron and proton diffusenesses as degrees of freedom (to be varied along with the shape degrees of freedom). One result, which is suggested by the relatively low cost in macroscopic energy of increasing the diffuseness of a heavy nucleus by 10% (about 4 MeV), is that superheavy nuclei near Z=126, N=184 may have a fair chance of becoming stabilized by shell effects. An appendix introduces an improved measure of surface diffuseness, with certain advantages over the conventional Süssmann width b.

Nuclear diffuseness as a degree of freedom

International Nuclear Information System (INIS)

Myers, W.D.; Swiatecki, W.J.

1998-01-01

The response of the nuclear energy to changes in neutron and proton surface diffusenesses is investigated using the Thomas-Fermi model. Algebraic expressions are provided for the energy cost of changing the two diffusenesses away from their equilibrium values. This will make it possible to generalize the macroscopic-microscopic calculations of nuclear masses and deformation energies by the inclusion of the neutron and proton diffusenesses as degrees of freedom (to be varied along with the shape degrees of freedom). One result, which is suggested by the relatively low cost in macroscopic energy of increasing the diffuseness of a heavy nucleus by 10% (about 4 MeV), is that superheavy nuclei near Z=126, N=184 may have a fair chance of becoming stabilized by shell effects. An appendix introduces an improved measure of surface diffuseness, with certain advantages over the conventional Suessmann width b. copyright 1998 The American Physical Society

Roster of Astronomy Departments with Enrollment and Degree Data, 2010: Results from the 2010 Survey of Enrollments and Degrees. Focus On

Science.gov (United States)

Nicholson, Starr; Mulvey, Patrick J.

2011-01-01

Academic year 2009-10 produced more astronomy bachelor's than in any other time in US history. The 382 astronomy physics bachelor's degrees earned in the class of 2010 represent a 19% increase from the previous class and an increase of 89% from a decade earlier. The number of astronomy PhDs conferred has remained at around 150 for the last 3…

Heat capacity and Joule-Thomson coefficient of selected n-alkanes at 0.1 and 10 MPa in broad temperature ranges

DEFF Research Database (Denmark)

Regueira Muñiz, Teresa; Varzandeh, Farhad; Stenby, Erling Halfdan

2017-01-01

Isobaric heat capacity of six n-alkanes, i.e. n-hexane, n-octane, n-decane, n-dodecane, n-tetradecane and n-hexadecane, was determined with a Calvet type differential heat-flux calorimeter at 0.1 and 10 MPa in a broad temperature range. The measured isobaric heat capacity data were combined...

Least limiting water range of Udox soil under degraded pastures on different sun-exposed faces

Science.gov (United States)

Passos, Renato Ribeiro; Marciano da Costa, Liovando; Rodrigues de Assis, Igor; Santos, Danilo Andrade; Ruiz, Hugo Alberto; Guimarães, Lorena Abdalla de Oliveira Prata; Andrade, Felipe Vaz

2017-07-01

The efficient use of water is increasingly important and proper soil management, within the specificities of each region of the country, allows achieving greater efficiency. The South and Caparaó regions of Espírito Santo, Brazil are characterized by relief of `hill seas' with differences in the degree of pasture degradation due to sun exposure. The objective of this study was to evaluate the least limiting water range in Udox soil under degraded pastures with two faces of exposure to the sun and three pedoenvironments. In each pedoenvironment, namely Alegre, Celina, and Café, two areas were selected, one with exposure on the North/West face and the other on the South/East face. In each of these areas, undisturbed soil samples were collected at 0-10 cm depth to determine the least limiting water range. The exposed face of the pasture that received the highest solar incidence (North/West) presented the lowest values in least limiting water range. The least limiting water range proved to be a physical quality indicator for Udox soil under degraded pastures.

Direct solar radiation on various slopes from 0 to 60 degrees north latitude.

Science.gov (United States)

John Buffo; Leo J. Fritschen; James L. Murphy

1972-01-01

Direct beam solar radiation is presented in graphical and tabular form for hourly, daily, and yearly values for seven slopes on each of 16 aspects from the Equator to 60 degrees north in 10-degree increments. Theoretical equations necessary for the calculations are given. Solar altitude and azimuth during the day and year are also presented for the same latitude.

Origin of Manipur Ophiolite Complex, Indo-Myanmar Range ...

Indian Academy of Sciences (India)

r b

2017-11-20

Nov 20, 2017 ... The Manipur. Ophiolite. Complex: Varying degree of serpentinization and relict pyroxenes. 11/20/2017. 13. Page 14. Serpentinization process preserves the protolith elemental signatures. 11/20/2017. 14 ... The range of Nd isotope ratios in the serpentinized peridotites. 11/20/2017. 17. Kingson et al.

Properties analysis of tensile strength, crystallinity degree and microstructure of polymer composite polypropylene-sand

International Nuclear Information System (INIS)

Sudirman; Karo-Karo, Aloma; Ari-Handayani; Bambang-Sugeng; Rukihati; Mashuri

2004-01-01

Materials modification base on polymer toward polymer composite is needed by addition of filler. Mechanical properties such as tensile strength, crystallinity degree and microstructure of polymer composite based on polypropylene with sand filler have been investigated. In this work, the polymer composite has been made by mixing the matrix of polypropylene melt flow 2 (PP MF2) or polypropylene melt flow 10 (PP MF 10) with sand filler in a labo plastomill. The composition of sand filler was varied to 10, 30, 40 and 50 % v/v, a then the composite were casted to the film sheets form. The sheets were characterized mechanically i.e tensile strength, crystallinity degree and microstructure. The result showed that the tensile strength decreased by increasing the volume fraction of sand filler, in accordance with microstructure investigation that the matrix area under zone plastic deformation (more cracks), while the filler experienced elastic deformation, so that the strength mechanism of filler did not achieved with expectation (Danusso and Tieghi theory). For filler more than 30 % of volume fraction, the tensile strength of polypropylene melt flow 10 (PP MF 10) was greater than that polypropylene melt flow 2 (PP MF2). It was caused by plasticities in PP MF 10. The tensile strength of PP MF2 was greater than that PP MF 10 for volume fraction of sand filler less than 30 %. It was caused by PP MF2 to be have more degree of crystallinity

A transmission power optimization with a minimum node degree for energy-efficient wireless sensor networks with full-reachability.

Science.gov (United States)

Chen, Yi-Ting; Horng, Mong-Fong; Lo, Chih-Cheng; Chu, Shu-Chuan; Pan, Jeng-Shyang; Liao, Bin-Yih

2013-03-20

Transmission power optimization is the most significant factor in prolonging the lifetime and maintaining the connection quality of wireless sensor networks. Un-optimized transmission power of nodes either interferes with or fails to link neighboring nodes. The optimization of transmission power depends on the expected node degree and node distribution. In this study, an optimization approach to an energy-efficient and full reachability wireless sensor network is proposed. In the proposed approach, an adjustment model of the transmission range with a minimum node degree is proposed that focuses on topology control and optimization of the transmission range according to node degree and node density. The model adjusts the tradeoff between energy efficiency and full reachability to obtain an ideal transmission range. In addition, connectivity and reachability are used as performance indices to evaluate the connection quality of a network. The two indices are compared to demonstrate the practicability of framework through simulation results. Furthermore, the relationship between the indices under the conditions of various node degrees is analyzed to generalize the characteristics of node densities. The research results on the reliability and feasibility of the proposed approach will benefit the future real deployments.

A Transmission Power Optimization with a Minimum Node Degree for Energy-Efficient Wireless Sensor Networks with Full-Reachability

Science.gov (United States)

Chen, Yi-Ting; Horng, Mong-Fong; Lo, Chih-Cheng; Chu, Shu-Chuan; Pan, Jeng-Shyang; Liao, Bin-Yih

2013-01-01

Transmission power optimization is the most significant factor in prolonging the lifetime and maintaining the connection quality of wireless sensor networks. Un-optimized transmission power of nodes either interferes with or fails to link neighboring nodes. The optimization of transmission power depends on the expected node degree and node distribution. In this study, an optimization approach to an energy-efficient and full reachability wireless sensor network is proposed. In the proposed approach, an adjustment model of the transmission range with a minimum node degree is proposed that focuses on topology control and optimization of the transmission range according to node degree and node density. The model adjusts the tradeoff between energy efficiency and full reachability to obtain an ideal transmission range. In addition, connectivity and reachability are used as performance indices to evaluate the connection quality of a network. The two indices are compared to demonstrate the practicability of framework through simulation results. Furthermore, the relationship between the indices under the conditions of various node degrees is analyzed to generalize the characteristics of node densities. The research results on the reliability and feasibility of the proposed approach will benefit the future real deployments. PMID:23519351

Degree of conversion and surface hardness of resin cement cured with different curing units.

Science.gov (United States)

Ozturk, Nilgun; Usumez, Aslihan; Usumez, Serdar; Ozturk, Bora

2005-01-01

The aim of this study was to evaluate the degree of conversion and Vickers surface hardness of resin cement under a simulated ceramic restoration with 3 different curing units: a conventional halogen unit, a high-intensity halogen unit, and a light-emitting diode system. A conventional halogen curing unit (Hilux 550) (40 s), a high-intensity halogen curing unit used in conventional and ramp mode (Optilux 501) (10 s and 20 s, respectively), and a light-emitting diode system (Elipar FreeLight) (20 s, 40 s) were used in this study. The dual-curing resin cement (Variolink II) was cured under a simulated ceramic restoration (diameter 5 mm, height 2 mm), and the degree of conversion and Vickers surface hardness were measured. For degree of conversion measurement, 10 specimens were prepared for each group. The absorbance peaks were recorded using the diffuse-reflection mode of Fourier transformation infrared spectroscopy. For Vickers surface hardness measurement, 10 specimens were prepared for each group. A load of 200 N was applied for 15 seconds, and 3 evaluations of each of the samples were performed. Degree of conversion achieved with Optilux 501 (20 s) was significantly higher than those of Hilux, Optilux 501 (10 s), Elipar FreeLight (20 s), and Elipar FreeLight (40 s). For Vickers surface hardness measurement, Optilux 501 (20 s) produced the highest surface hardness value. No significant differences were found among the Hilux, Optilux 501 (10 s), Elipar FreeLight (20 s), and Elipar FreeLight (40 s). The high-intensity halogen curing unit used in ramp mode (20 s) produced harder resin cement surfaces than did the conventional halogen curing unit, high-intensity halogen curing unit used in conventional mode (10 s) and light-emitting diode system (20 s, 40 s), when cured through a simulated ceramic restoration.

Performance and microbial community composition dynamics of aerobic granular sludge from sequencing batch bubble column reactors operated at 20 degrees C, 30 degrees C, and 35 degrees C.

Science.gov (United States)

Ebrahimi, Sirous; Gabus, Sébastien; Rohrbach-Brandt, Emmanuelle; Hosseini, Maryam; Rossi, Pierre; Maillard, Julien; Holliger, Christof

2010-07-01

Two bubble column sequencing batch reactors fed with an artificial wastewater were operated at 20 degrees C, 30 degrees C, and 35 degrees C. In a first stage, stable granules were obtained at 20 degrees C, whereas fluffy structures were observed at 30 degrees C. Molecular analysis revealed high abundance of the operational taxonomic unit 208 (OTU 208) affiliating with filamentous bacteria Leptothrix spp. at 30 degrees C, an OTU much less abundant at 20 degrees C. The granular sludge obtained at 20 degrees C was used for the second stage during which one reactor was maintained at 20 degrees C and the second operated at 30 degrees C and 35 degrees C after prior gradual increase of temperature. Aerobic granular sludge with similar physical properties developed in both reactors but it had different nutrient elimination performances and microbial communities. At 20 degrees C, acetate was consumed during anaerobic feeding, and biological phosphorous removal was observed when Rhodocyclaceae-affiliating OTU 214 was present. At 30 degrees C and 35 degrees C, acetate was mainly consumed during aeration and phosphorous removal was insignificant. OTU 214 was almost absent but the Gammaproteobacteria-affiliating OTU 239 was more abundant than at 20 degrees C. Aerobic granular sludge at all temperatures contained abundantly the OTUs 224 and 289 affiliating with Sphingomonadaceae indicating that this bacterial family played an important role in maintaining stable granular structures.

Accelerated ice-sheet mass loss in Antarctica from 18-year satellite laser ranging measurements

Directory of Open Access Journals (Sweden)

Shuanggen Jin

2016-02-01

Full Text Available Accurate estimate of the ice-sheet mass balance in Antarctic is very difficult due to complex ice sheet condition and sparse in situ measurements. In this paper, the low-degree gravity field coefficients of up to degree and order 5 derived from Satellite Laser Ranging (SLR measurements are used to determine the ice mass variations in Antarctica for the period 1993–2011. Results show that the ice mass is losing with -36±13 Gt/y in Antarctica, -42±11 Gt/y in the West Antarctica and 6±10 Gt/y in the East Antarctica from 1993 to 2011. The ice mass variations from the SLR 5×5 have a good agreement with the GRACE 5×5, GRACE 5×5 (1&2 and GRACE (60×60 for the entire continent since 2003, but degree 5 from SLR is not sufficient to quantify ice losses in West and East Antarctica, respectively. The rate of ice loss in Antarctica is -28±17 Gt/y for 1993-2002 and -55±17 Gt/y for 2003-2011, indicating significant accelerated ice mass losses since 2003. Furthermore, the results from SLR are comparable with GRACE measurements.

Modeling Control Strategies and Range Impacts for Electric Vehicle Integrated Thermal Management Systems with MATLAB/Simulink

Energy Technology Data Exchange (ETDEWEB)

Titov, Gene; Lustbader, Jason Aaron

2017-03-28

The National Renewable Energy Laboratory's (NREL's) CoolSim MATLAB/Simulink modeling framework was used to explore control strategies for an electric vehicle combined loop system. Three system variants of increased complexity and efficiency were explored: a glycol-based positive temperature coefficient heater (PTC), PTC with power electronics and electric motor (PEEM) waste heat recovery, and PTC with PEEM waste heat recovery plus heat pump versions. Additionally, the benefit of electric motor preheating was considered. A two-level control strategy was developed where the mode selection and component control were treated separately. Only the parameters typically available by vehicle sensors were used to control the system. The control approach included a mode selection algorithm and controllers for the compressor speed, cabin blower flow rate, coolant flow rate, and the front-end heat exchanger coolant bypass rate. The electric motor was bypassed by the cooling circuit until its temperature exceeded the coolant inlet temperature. The impact of these thermal systems on electric vehicle range during warmup was simulated for the Urban Dynamometer Driving Schedule (UDDS) and Highway Fuel Economy Test (HWFET2X) drive cycles weighted 45%/55% respectively. A range of ambient temperatures from -20 degrees C to +20 degrees C was considered. NREL's Future Automotive Systems Technology Simulator (FASTSim) vehicle modeling tool showed up to a 10.9% improvement in range for the full system over the baseline during warmup from cold soak. The full system with preheat showed up to 17% improvement in range.

Diffractometric method for determining the degree of crystallinity of materials

Energy Technology Data Exchange (ETDEWEB)

Chukhchin, D. G., E-mail: dimatsch@mail.ru; Malkov, A. V.; Tyshkunova, I. V.; Mayer, L. V.; Novozhilov, E. V. [Lomonosov Northen (Arctic) Federal University (Russian Federation)

2016-05-15

A new method for determining the degree of crystallinity of a material from X-ray diffraction data has been developed. The method is based on estimating the rate of change in function I = f(2θ) in the entire range of scattering angles. A calculation is performed using the ratio of the integral modulus of the first derivative of intensity with respect to angle 2θ to the integral area under the diffraction pattern curve. The method was tested on two substances with known amorphous and crystalline components. A linear relationship is revealed between the specified ratio of crystalline and amorphous parts and the calculated crystallinity index. The proposed method allows one to estimate impartially and compare the degree of crystallinity for samples of different nature.

Six-degree-of-freedom active vibration isolation using a Stewart platform mechanism

Science.gov (United States)

Geng, Zheng; Haynes, Leonard S.

1993-01-01

The design and control problems of a class of multidegree-of-freedom vibration isolation systems (VISs) based on a Stewart platform mechanism are studied. A prototype of a six-degree-of-freedom VIS for precision control of a wide range of space-based structures implemented in Intelligent Automation, Inc. is described. The feasibility of using a Stewart platform to achieve 6-degree-of-freedom vibration control in space applications is shown. A new Terfenol-D actuator characterized by significantly longer stroke than any commercially available Terfenol-D actuator and direct flux and strain sensors integral to the actuator is described.

Lifetime measurements in the 10-13 s range

International Nuclear Information System (INIS)

Bellini, Dzh.; Foa, L.; Dzhordzhi, M.

1984-01-01

Semiconducting detectors used in experimental high energy physics are described. Performances of Ge- and Si detectors and telescopes developed on their base as well as some problems associated with separation of coherent and incoherent events are described in detail. New fields are considered of semiconductor detector application: lifetime measurements of heavy particles decaying via weak interaction, such as D-mesons as well as the procedure of determination of the meson production and disintegration point with a space resolution enabling one to measure the length of meson path. The space resolution of detectors operating as proportional chambeps approaches 10-20 μm. Principles of devising the electronics for active target processors are described, solid state detectors being used for the latter

Long-range correlations from colour confinement

International Nuclear Information System (INIS)

Jurkiewicz, J.; Zenczykowski, P.

1979-01-01

A class of independent parton emission models is generalized by the introduction of the colour degrees of freedom. In the proposed models colour confinement extorts strong long-range forward-backward correlations, the rise of one-particle inclusive distribution and the KNO scaling. It leads to the analytically calculable definite asymptotic predictions for the D/ ratio which depends only on the choice of the colour group. Multiplicity distribution develops a remarkably long tail. (author)

Establishing the Range of Perceptually Natural Visual Walking Speeds for Virtual Walking-In-Place Locomotion

DEFF Research Database (Denmark)

Nilsson, Niels Christian; Serafin, Stefania; Nordahl, Rolf

2014-01-01

to virtual motion. This paper describes two within-subjects studies performed with the intention of establishing the range of perceptually natural walking speeds for WIP locomotion. In both studies, subjects performed a series of virtual walks while exposed to visual gains (optic flow multipliers) ranging...... from 1.0 to 3.0. Thus, the slowest speed was equal to an estimate of the subjects normal walking speed, while the highest speed was three times greater. The perceived naturalness of the visual speed was assessed using self-reports. The first study compared four different types of movement, namely...... proportional to the degree of underestimation of the virtual speeds for both treadmill-mediated virtual walking and WIP locomotion. Combined, the results constitute a first attempt at establishing a set of guidelines specifying what virtual walking speeds WIP gestures should produce in order to facilitate...

Development of a standardized susceptibility test for Campylobacter with quality control ranges for ciprofloxacin, doxycycline, erythromycin, gentamicin, and meropenem

DEFF Research Database (Denmark)

McDermott, P. F.; Bodeis, S. M.; Aarestrup, Frank Møller

2004-01-01

-control (QC) strain. Minimal inhibitory concentration (MIC) QC ranges were determined for two incubation time/temperature combinations: 36degreesC for 48 hr and 42degreesC for 24 hr. Quality-control ranges were determined for ciprofloxacin, doxycycline, erythromycin, gentamicin, and meropenem. For all...

Spherical Harmonics Analysis of the ECMWF Global Wind Fields at the 10-Meter Height Level During 1985: A Collection of Figures Illustrating Results

Science.gov (United States)

Sanchez, Braulio V.; Nishihama, Masahiro

1997-01-01

Half-daily global wind speeds in the east-west (u) and north-south (v) directions at the 10-meter height level were obtained from the European Centre for Medium Range Weather Forecasts (ECMWF) data set of global analyses. The data set covered the period 1985 January to 1995 January. A spherical harmonic expansion to degree and order 50 was used to perform harmonic analysis of the east-west (u) and north-south (v) velocity field components. The resulting wind field is displayed, as well as the residual of the fit, at a particular time. The contribution of particular coefficients is shown. The time variability of the coefficients up to degree and order 3 is presented. Corresponding power spectrum plots are given. Time series analyses were applied also to the power associated with degrees 0-10; the results are included.

HRD Degrees.

Science.gov (United States)

Geber, Beverly

1987-01-01

The author describes the growing movement toward accreditation for human resources development professionals. She covers the issue of diversity, undergraduate versus graduate degrees, and future trends. (CH)

Extended Range of a Gun Launched Smart Projectile Using Controllable Canards

OpenAIRE

Mark Costello

2001-01-01

This effort investigates the extent to which moveable canards can extend the range of indirect fire munitions using both projectile body and canard lift. Implications on terminal velocity and time of flight using this mechanism to extend range are examined for various canard configurations. Performance predictions are conducted using a six-degree-of-freedom simulation model that has previously been validated against range data. The projectile dynamic equations are formed in the body frame and...

Microstructural evolution of austenitic stainless steels irradiated to 17 dpa in spectrally tailored experiment of the ORR and HFIR at 400{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Wakai, E.; Hashimoto, N.; Gibson, L.T. [Oak Ridge National Lab., TN (United States)] [and others

1997-08-01

The microstructural evolution of austenitic JPCA aged and solution annealed JPCA, 316R, C, K, and HP steels irradiated at 400{degrees}C in spectrally tailored experiments of the ORR and HFIR has been investigated. The helium generation rates were about 12-16 appm He/dpa on the average up to 17.3 dpa. The number densities and average diameters of dislocation loops in the steels have ranges of 3.3 x 10{sup 21} m{sup -3} and 15.2-26.3 nm, respectively, except for HP steel for which they are 1.1 x 10{sup 23} m{sup -3} and 8.0 nm. Precipitates are formed in all steels except for HP steel, and the number densities and average diameters have ranges of 5.2 x 10{sup 20} - 7.7 x 10{sup 21} m{sup -3} and 3.4- 19.3 nm, respectively. In the 216R, C, and K steels, the precipitates are also formed at grain boundaries, and the mean sizes of these are about 110, 50, and 50 nm, respectively. The number densities of cavities are about 1 x 10{sup 22} m{sup -3} in all the steels. The swelling is low in the steels which form the precipitates.

HadISST (1-degree)/HadISST (1-degree)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Monthly version of HadISST sea surface temperature component (1-degree). See Rayner, N. A., Parker, D. E., Horton, E. B., Folland, C. K., Alexander, L. V., Rowell,...

Excitation functions for 121,123Sb(α,xn), (x=1-4) reactions in approx. 10-40 MeV range

International Nuclear Information System (INIS)

Prasad, R.; Bhardwaj, H.D.

1986-04-01

Excitation functions for 121 Sb(α,n), 121 Sb(α,2n), 123 Sb(α,n) and 123 Sb(α,3n) reactions in the energy range approx. 10 to 40 MeV have been measured using stacked-foil technique and are calculated theoretically using statistical model with and without the inclusion of pre-equilibrium emission. Inclusion of pre-equilibrium emission is found to give good agreement between the experimental and measured excitation functions. (author)

Set our Master's degrees free

Science.gov (United States)

Padman, Rachael

2010-04-01

Making UK undergraduate physics degrees longer must have seemed like a good idea at the time. Back in the early 1990s the standard three-year Bachelor's physics degree (four years in Scotland) was under pressure at both ends. The A-level curriculum - one of the requirements for entry onto a degree course - was being increasingly modularized, and dumbed down. Physics students were arriving at university less well prepared than in the past and there was an increasing awareness that graduates of five-year continental degree courses were better equipped for a professional scientific career than those in the UK. At the same time, local education authorities in the UK were required to provide full funding for a first degree, whether for three or four years.

A study on alpha particles range in Cr-39

International Nuclear Information System (INIS)

Ibrahim, Z.A.; Talaat, T.M.; Abdel-Aziz, Kh.M.A.; El-Asser, M.R.

2000-01-01

Cr-39 plastic nuclear track detector has been used in range determination of alpha particles. A set of experiments was carried out for studying alpha energy and track diameter relationships. This work was done under the optimum conditions of Cr-39 etching in 6.25 N NaOH at 70 degree C for various etching times. Determination of alpha range in Cr-39 recorders was studied at different energy values using the over etched track profile technique. Data are discussed within the framework of track formation theory in plastic foils, comparison between experimental and theoretical values of alpha range is included

Alanine-EPR dosimetry for measurements of ionizing radiation absorbed doses in the range 0.5-10 kGy

CERN Document Server

Peimel-Stuglik, Z

2001-01-01

The usefulness of two, easy accessible alanine dosimeters (ALANPOL from IChTJ and foil dosimeter from Gamma Service, Radeberg, Germany) to radiation dose measurement in the range of 0.5-10 kGy, were investigated. In both cases, the result of the test was positive. The foil dosemeter from Gamma Service is recommended for dose distribution measurements in fantoms or products, ALANPOL - for routine measurements. The EPR-alanine method based on the described dosimeters can be successfully used, among others, in the technology of radiation protection of food.

Effect of temperature and water activity on heat transfer in parsley leaves in the  range of temperatures 10–30 °C

Directory of Open Access Journals (Sweden)

Jiří Štencl

2007-01-01

Full Text Available The equilibrium moisture contents of parsley leaves were measured by the gravimetric dynamic method with continuous recording of changes in sample weight. Consequently water activity values were determined. Henderson equation was found to be a good model both for moisture adsorption and desorption. Isosteric heat of sorption was defined and determined in the temperature range of 10–30 °C. Clausius-Clapeyron equation was used to calculate the isosteric heat of sorption since no dependence on temperature in the analysed range was observed. The isosteric heats of sorption (qnst were indicated graphic in the form qnst versus moisture content. Values for isosteric heat of sorption ranged from 54.41 to 46.85 kJ/mol.

Control range: a controllability-based index for node significance in directed networks

International Nuclear Information System (INIS)

Wang, Bingbo; Gao, Lin; Gao, Yong

2012-01-01

While a large number of methods for module detection have been developed for undirected networks, it is difficult to adapt them to handle directed networks due to the lack of consensus criteria for measuring the node significance in a directed network. In this paper, we propose a novel structural index, the control range, motivated by recent studies on the structural controllability of large-scale directed networks. The control range of a node quantifies the size of the subnetwork that the node can effectively control. A related index, called the control range similarity, is also introduced to measure the structural similarity between two nodes. When applying the index of control range to several real-world and synthetic directed networks, it is observed that the control range of the nodes is mainly influenced by the network's degree distribution and that nodes with a low degree may have a high control range. We use the index of control range similarity to detect and analyze functional modules in glossary networks and the enzyme-centric network of homo sapiens. Our results, as compared with other approaches to module detection such as modularity optimization algorithm, dynamic algorithm and clique percolation method, indicate that the proposed indices are effective and practical in depicting structural and modular characteristics of sparse directed networks

A system to measure isomeric state half-lives in the 10 ns to 10 μs range

Energy Technology Data Exchange (ETDEWEB)

Toufen, D. L., E-mail: dennis@if.usp.br [Institute of Physics, University of São Paulo, C.P. 66318, 05315-970 São Paulo, São Paulo (Brazil); Federal Institute of Education, Science and Technology of São Paulo - IFSP, 07115-000 Guarulhos, São Paulo (Brazil); Allegro, P. R. P.; Medina, N. H.; Oliveira, J. R. B.; Cybulska, E. W.; Seale, W. A.; Ribas, R. V. [Institute of Physics, University of São Paulo, C.P. 66318, 05315-970 São Paulo, São Paulo (Brazil); Linares, R. [Fluminense Federal University, 24220-900 Niterói, Rio de Janeiro (Brazil); Silveira, M. A. G. [Universitary Center of FEI, 09850-901 São Bernardo do Campo, São Paulo (Brazil)

2014-07-15

The Isomeric State Measurement System (SISMEI) was developed to search for isomeric nuclear states produced by fusion-evaporation reactions. The SISMEI consists of 10 plastic phoswich telescopes, two lead shields, one NaI(Tl) scintillation detector, two Compton suppressed HPGe γ-ray detectors, and a cone with a recoil product catcher. The new system was tested at the 8 UD Pelletron tandem accelerator of the University of São Paulo with the measurement of two known isomeric states: {sup 54}Fe, 10{sup +} state (E = 6527.1 (11) keV, T{sub 1/2} = 364(7) ns) and the 5/2{sup +} state of {sup 19}F (E = 197.143 (4) keV, T{sub 1/2} = 89.3 (10) ns). The results indicate that the system is capable of identifying delayed transitions, of measuring isomeric state lifetimes, and of identifying the feeding transitions of the isomeric state through the delayed γ-γ coincidence method. The measured half-life for the 10{sup +} state was T{sub 1/2} = 365(14) ns and for the 5/2{sup +} state, 100(36) ns.

A system to measure isomeric state half-lives in the 10 ns to 10 μs range

Science.gov (United States)

Toufen, D. L.; Allegro, P. R. P.; Medina, N. H.; Oliveira, J. R. B.; Cybulska, E. W.; Seale, W. A.; Linares, R.; Silveira, M. A. G.; Ribas, R. V.

2014-07-01

The Isomeric State Measurement System (SISMEI) was developed to search for isomeric nuclear states produced by fusion-evaporation reactions. The SISMEI consists of 10 plastic phoswich telescopes, two lead shields, one NaI(Tl) scintillation detector, two Compton suppressed HPGe γ-ray detectors, and a cone with a recoil product catcher. The new system was tested at the 8 UD Pelletron tandem accelerator of the University of São Paulo with the measurement of two known isomeric states: 54Fe, 10+ state (E = 6527.1 (11) keV, T1/2 = 364(7) ns) and the 5/2+ state of 19F (E = 197.143 (4) keV, T1/2 = 89.3 (10) ns). The results indicate that the system is capable of identifying delayed transitions, of measuring isomeric state lifetimes, and of identifying the feeding transitions of the isomeric state through the delayed γ-γ coincidence method. The measured half-life for the 10+ state was T1/2 = 365(14) ns and for the 5/2+ state, 100(36) ns.

Laboratory reflectometer for the investigation of optical elements in a wavelength range of 5-50 nm: description and testing results

Science.gov (United States)

Garakhin, S. A.; Zabrodin, I. G.; Zuev, S. E.; Kas'kov, I. A.; Lopatin, A. Ya.; Nechay, A. N.; Polkovnikov, V. N.; Salashchenko, N. N.; Tsybin, N. N.; Chkhalo, N. I.; Svechnikov, M. V.

2017-05-01

We describe a laboratory reflectometer developed at the IPM RAS for precision measurements of spectral and angular dependences of the reflection and transmission coefficients of optical elements in a wavelength range of 5-50 nm. The radiation is monochromatised using a high-resolution Czerny-Turner spectrometer with a plane diffraction grating and two spherical collimating mirrors. A toroidal mirror focuses the probe monochromatic beam on a sample. The X-ray source is a highly ionised plasma produced in the interaction of a high-power laser beam with a solid target at an intensity of 1011-1012 W cm-2. To stabilise the emission characteristics, the target executes translatory and rotary motions in such a way that every pulse irradiates a new spot. The short-focus lens is protected from contamination by erosion products with the use of a specially designed electromagnetic system. The samples under study are mounted on a goniometer is accommodated in a dedicated chamber, which provides five degrees of freedom for samples up to 500 mm in diameter and two degrees of freedom for a detector. The sample mass may range up to 10 kg. The X-ray radiation is recorded with a detector composed of a CsI photocathode and two microchannel plates. A similar detector monitors the probe beam intensity. The spectral reflectometer resolution is equal to 0.030 nm with the use of ruled gratings with a density of 900 lines mm-1 (spectral range: 5-20 nm) and to 0.067 nm for holographic gratings with a density of 400 lines mm-1 (spectral range: 10-50 nm). We analyse the contribution of higher diffraction orders to the probe signal intensity and the ways of taking it into account in the measurements. Examples are given which serve to illustrate the reflectometer application to the study of multilayer mirrors and filters.

Opposite Degree Algorithm and Its Applications

Directory of Open Access Journals (Sweden)

Xiao-Guang Yue

2015-12-01

Full Text Available The opposite (Opposite Degree, referred to as OD algorithm is an intelligent algorithm proposed by Yue Xiaoguang et al. Opposite degree algorithm is mainly based on the concept of opposite degree, combined with the idea of design of neural network and genetic algorithm and clustering analysis algorithm. The OD algorithm is divided into two sub algorithms, namely: opposite degree - numerical computation (OD-NC algorithm and opposite degree - Classification computation (OD-CC algorithm.

On the relationship between degree of hand-preference and degree of language lateralization

NARCIS (Netherlands)

Somers, Metten; Ophoff, Roel A; Boks, Marco P; Fleer, Willemien; de Visser, Kees C L; Kahn, René S; Sommer, Iris E; Aukes, M.F.

2015-01-01

Language lateralization and hand-preference show inter-individual variation in the degree of lateralization to the left- or right, but their relation is not fully understood. Disentangling this relation could aid elucidating the mechanisms underlying these traits. The relation between degree of

Analytically calculated post-Keplerian range and range-rate perturbations: the solar Lense-Thirring effect and BepiColombo

Science.gov (United States)

Iorio, Lorenzo

2018-05-01

We analytically calculate the time series for the perturbations Δ ρ \\left(t\\right), Δ \\dot{ρ }\\left(t\\right) induced by a general disturbing acceleration A on the mutual range ρ and range-rate \\dot{ρ } of two test particles A, B orbiting the same spinning body. We apply it to the general relativistic Lense-Thirring effect, due to the primary's spin S, and the classical perturbation arising from its quadrupole mass moment J2 for arbitrary orbital geometries and orientation of the source's symmetry axis {\\hat{S}}. The Earth-Mercury range and range-rate are nominally affected by the Sun's gravitomagnetic field to the 10 m, 10-3 cm s-1 level, respectively, during the extended phase (2026-2028) of the forthcoming BepiColombo mission to Mercury whose expected tracking accuracy is of the order of ≃0.1 m, 2 × 10-4 cm s-1. The competing signatures due to the solar quadrupole J_2^{\\odot }, if modelled at the σ _{J_2^{\\odot }}˜eq 10^{-9} level of the latest planetary ephemerides INPOP17a, are nearly 10 times smaller than the relativistic gravitomagnetic effects. The position and velocity vectors \\boldsymbol {r}, \\boldsymbol {v} of Mercury and Earth are changed by the solar Lense-Thirring effect by about 10 m, 1.5 m and 10-3 cm s-1, 10-5 cm s-1, respectively, over 2 yr; neglecting such shifts may have an impact on long-term integrations of the inner Solar system dynamics over ˜Gyr time-scales.

Prevalence of open angle glaucoma in accompanying first degree relatives of patients with glaucoma

Directory of Open Access Journals (Sweden)

Franciele Vegini

2008-01-01

Full Text Available OBJECTIVE: The aim of this study was to determine the prevalence of open angle glaucoma in first-degree relatives accompanying POAG patients during routine examination in a reference hospital. METHOD: First-degree relatives of primary open angle glaucoma patients who accompanied their relatives to the glaucoma service of a reference hospital were screened for glaucoma. RESULTS: One-hundred and one first-degree relatives were examined, of which 56.4% had never had their intraocular pressure measured. 10.9% had previously been diagnosed with glaucoma, and 5.9% were newly diagnosed during this study. CONCLUSIONS: The eye examination of first-degree relatives identified a significant percentage of individuals with glaucoma. Despite being first-degree relatives of glaucoma patients, 56.4% of the companions had never had their eye pressure measured, demonstrating a lack of awareness about this disease.

A technique for extending by ∼10{sup 3} the dynamic range of compact proton spectrometers for diagnosing ICF implosions on the National Ignition Facility and OMEGA

Energy Technology Data Exchange (ETDEWEB)

Sio, H., E-mail: hsio@mit.edu; Séguin, F. H.; Frenje, J. A.; Gatu Johnson, M.; Zylstra, A. B.; Rinderknecht, H. G.; Rosenberg, M. J.; Li, C. K.; Petrasso, R. D. [Massachusetts Institute of Technology Plasma Science and Fusion Center, Cambridge, Massachusetts 02139 (United States)

2014-11-15

Wedge Range Filter (WRF) proton spectrometers are routinely used on OMEGA and the NIF for diagnosing ρR and ρR asymmetries in direct- and indirect-drive implosions of D{sup 3}He-, D{sub 2}-, and DT-gas-filled capsules. By measuring the optical opacity distribution in CR-39 due to proton tracks in high-yield applications, as opposed to counting individual tracks, WRF dynamic range can be extended by 10{sup 2} for obtaining the spectral shape, and by 10{sup 3} for mean energy (ρR) measurement, corresponding to proton fluences of 10{sup 8} and 10{sup 9} cm{sup −2}, respectively. Using this new technique, ρR asymmetries can be measured during both shock and compression burn (proton yield ∼10{sup 8} and ∼10{sup 12}, respectively) in 2-shock National Ignition Facility implosions with the standard WRF accuracy of ±∼10 mg/cm{sup 2}.

Long-range correlation and market segmentation in bond market

Science.gov (United States)

Wang, Zhongxing; Yan, Yan; Chen, Xiaosong

2017-09-01

This paper investigates the long-range auto-correlations and cross-correlations in bond market. Based on Detrended Moving Average (DMA) method, empirical results present a clear evidence of long-range persistence that exists in one year scale. The degree of long-range correlation related to maturities has an upward tendency with a peak in short term. These findings confirm the expectations of fractal market hypothesis (FMH). Furthermore, we have developed a method based on a complex network to study the long-range cross-correlation structure and applied it to our data, and found a clear pattern of market segmentation in the long run. We also detected the nature of long-range correlation in the sub-period 2007-2012 and 2011-2016. The result from our research shows that long-range auto-correlations are decreasing in the recent years while long-range cross-correlations are strengthening.

Diploma to degree 1976 to 1993

International Nuclear Information System (INIS)

Price, Richard

2009-01-01

The debate on degree education for radiographers began in earnest in the mid-1970s. Initially the debate hinged around whether a degree education was necessary for radiographers. One argument was that it was felt that a degree would separate academic and clinical training but eventually when degrees were introduced practical skills were assessed formally for the first time; something that had not been achieved with the Diploma of the College of Radiographers (DCR). The DCR itself became a barrier to degree education as the College of Radiographers (CoR) insisted that it was the only qualification recognised for state registration and as such would have to remain embedded as a distinct qualification within a degree. A major breakthrough came when the Council for National Academic Awards (CNAA) recognised the DCR at the same level as an ordinary degree. Around the same time the CoR published its Degree Rationale which announced a change in policy by not insisting that the DCR was sacrosanct. Developments followed rapidly and the first honours degree in radiography was validated in 1989 despite opposition from scientific officers at the Department of Health. Degrees were approved for state registration and radiography became a graduate profession by 1993 following years of debate and after overcoming opposition from both within and external to the profession.

Proton induced changes of the texturing degree of superconducting YBaCuO ceramics

International Nuclear Information System (INIS)

Kalanov, M.U.

2004-01-01

Full text: The aim of this work was to improve conducting properties of superconducting yttrium ceramics by means of proton-induced increase in the texturing degree. The object were single-phase (98 %), isotropic YBa 2 Cu 3 O 7-δ (δ ≅ 0.05) ceramic pellets of 12 mm in diameter and 0.6 mm of thickness, with the average grain size of 14 μm, the lattice parameters a r ≅ 3.822, b r ≅ 3.883 and c r ≅ 11.673 A, the density ∼ 5.1 g.cm -3 , the specific resistance ∼ 3 mΩ· cm in the normal state, had the superconducting T c ≅ 91 K. The samples were irradiated at the cyclotron U-150 of the INP AS RUz with 18 MeV-protons within the range of fluences 1014 - 10 15 cm -2 at the beam current of 20 nA and 300 K. The structure characteristics of samples were determined at the diffractometer DRON-UM1 (λ CuKα 1.54178 A). Electrophysical parameters were measured with the four-probe technique at the direct current of 10 mA. The texturing degree was determined by the formula F t = P t - P o /1 - P o , where P o and P t are the ratios of the (00L) reflection intensity sum to that of all (HKL) structure lines for isotropic and textured ceramics, respectively. The diffraction spectrum of the sample irradiated with the proton fluence of 2·10 14 cm -2 demonstrated a noticeable decrease in the {HKL} reflection intensities and simultaneous increase in those of {00L}. By this the value of ρ (100 K) decreased in 3 times, and the T c by 0.3 K, the superconducting transition broadened and the resistivity slope of the temperature dependence increased. Further growth of the {{00L} line intensities at elevated doses (4·10 14 † 8·10 14 cm -2 ) did not occur, yet the ρ (100 K) value rose fast, the T c dropped, and the character of conductivity changed from metallic to semiconducting. Such anomaly in the structure characteristics and superconducting properties of the irradiated YBa 2 Cu 3 O 7-δ ceramics can be explained by formation of the texture on the sample surface

Fracture toughness testing of V-4Cr-4Ti at 25{degrees}C and -196{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Li, H.X.; Kurtz, R.J. [Pacific Northwest National Lab., Richland, WA (United States)

1996-10-01

Measurements of the fracture toughness of the production-scale heat (832665) of V-4Cr-4Ti have been performed at 25{degrees}C and {minus}196{degrees}C using compact tension (CT) specimens. Test specimens were vacuum annealed at either 1000{degrees}C for 1 hour (HT1) or 1050{degrees}C for two hours (HT2). Specimens given the HT1 treatment were annealed after final machining, whereas the HT2 specimens received the 1050{degrees}C anneal at Teledyne Wah Chang prior to final machining. Following machining HT2 specimens were then vacuum annealed at 180{degrees}C for two hours to remove hydrogen. Specimens treated using HT1 had a partially recrystallized microstructure and those treated using HT2 had a fully recrystallized microstructure. The fracture toughness at 25{degrees}C was determined by J-integral tests and at {minus}196{degrees}C by ASTM E 399 type tests. Toughness values obtained at {minus}196{degrees}C were converted to J-integral values for comparison to the 25{degrees}C data. The 25{degrees}C fracture toughness was very high with none of the specimens giving valid results per ASTM criteria. Specimens fractured by microvoid coalescence. The fracture toughness at {minus}196{degrees}C was much lower than that at 25{degrees}C and the fracture surface showed predominantly cleavage features. The present results show a transition from ductile to brittle behavior with decreasing test temperature which is not observed from one-third scale Charpy impact tests. The fracture toughness at {minus}196{degrees}C was still quite high, however, at about 75 kJ/m{sup 2}. Delaminations in planes normal to the thickness direction were seen at both test temperatures. Fracture surfaces inside the delaminations exhibited nearly 100% cleavage facets. The cause of the brittle delaminations was not determined, but will be a subject for further investigation.

Interlaced zone plate optics for hard X-ray imaging in the 10 nm range

Science.gov (United States)

Mohacsi, Istvan; Vartiainen, Ismo; Rösner, Benedikt; Guizar-Sicairos, Manuel; Guzenko, Vitaliy A.; McNulty, Ian; Winarski, Robert; Holt, Martin V.; David, Christian

2017-03-01

Multi-keV X-ray microscopy has been particularly successful in bridging the resolution gap between optical and electron microscopy. However, resolutions below 20 nm are still considered challenging, as high throughput direct imaging methods are limited by the availability of suitable optical elements. In order to bridge this gap, we present a new type of Fresnel zone plate lenses aimed at the sub-20 and the sub-10 nm resolution range. By extending the concept of double-sided zone plate stacking, we demonstrate the doubling of the effective line density and thus the resolution and provide large aperture, singlechip optical devices with 15 and 7 nm smallest zone widths. The detailed characterization of these lenses shows excellent optical properties with focal spots down to 7.8 nm. Beyond wave front characterization, the zone plates also excel in typical imaging scenarios, verifying their resolution close to their diffraction limited optical performance.

The Cu-Te-Sb phase system at temperatures between 300 and 1000 degree C

DEFF Research Database (Denmark)

Karup-Møller, Sven

1997-01-01

Phase relations were determined in the Cu-Te-Sb phase system at 300, 350, 400, 500, 600, 700, 800, 900 and 1000 degree C. At temperatures between 400 and 900 degree C a cubic primitive ternary phase A exists. It has the empirical formula Cu(10.32-0.97x)Te(x)Sb(4-x) (Z=2, a=7.682 Å). A small liquid...

Six-Degree Head-Down Tilt Bed Rest: Forty Years of Development as a Physiological Analog for Weightlessness

Science.gov (United States)

Smith, Jeffrey D.; Cromwell, Ronita L.; Kundrot, Craig E.; Charles, John B.

2011-01-01

Early on, bed rest was recognized as a method for inducing many of the physiological changes experienced by spaceflight. Head-down tilt (HDT) bed rest was first introduced as an analog for spaceflight by a Soviet team led by Genin and Kakurin. Their study was performed in 1970 (at -4 degrees) and lasted for 30 days; results were reported in the Russian Journal of Space Biology (Kosmicheskaya Biol. 1972; 6(4): 26-28 & 45-109). The goal was to test physiological countermeasures for cosmonauts who would soon begin month-long missions to the Salyut space station. HDT was chosen to produce a similar sensation of blood flow to the head reported by Soyuz cosmonauts. Over the next decade, other tilt angles were studied and comparisons with spaceflight were made, showing that HDT greater than 4 degrees was superior to horizontal bed rest for modeling acute physiological changes observed in space; but, at higher angles, subjects experienced greater discomfort without clearly improving the physiological comparison to spaceflight. A joint study performed by US and Soviet investigators, in 1979, set the goal of standardization of baseline conditions and chose 6-degrees HDT. This effectively established 6-degree HDT bed rest as the internationally-preferred analog for weightlessness and, since 1990, nearly all further studies have been conducted at 6-degrees HDT. A thorough literature review (1970-2010) revealed 534 primary scientific journal articles which reported results from using HDT as a physiological analog for spaceflight. These studies have ranged from as little as 10 minutes to the longest duration of 370 days. Long-term studies lasting four weeks or more have resulted in over 170 primary research articles. Today, the 6-degree HDT model provides a consistent, thoroughly-tested, ground-based analog for spaceflight and allows the proper scientific controls for rigorous testing of physiological countermeasures; however, all models have their strengths and limits. The 6

Electrical conductivity measurement on DKDP Crystals with different deuterated degrees

International Nuclear Information System (INIS)

Liu, Baoan; Yin, Xin; Xu, Mingxia; Ji, Shaohua; Zhu, Lili; Zhang, Lisong; Sun, Xun; Xu, Xinguang; Zhao, Minglei; Zhang, Qinghua

2012-01-01

Ten DKDP single crystals with deuterated degrees ranging from 0 to 90 % were grown by a rapid growth method. The electrical conductivities of these crystals were measured along a and c directions at room temperature. The electrical conductivity increases with the increase for deuterium content. Also, the electrical conductivities of certain crystals were measured at various temperatures ranging from 20 to 130 C. The values of activation energy decrease as the increase of deuterium content. The present study indicates that the deuterium tunneling frequency is smaller than that of hydrogen, which may be the reason why the variation of electrical conductivity happens after the substitution of hydrogen for deuterium in KDP crystal. (orig.)

Investigation at transonic speeds of the lateral-control and hinge-moment characteristics of a flap-type spoiler aileron on a 60 degree delta wing

Science.gov (United States)

Wiley, Harleth G; Taylor, Robert T

1954-01-01

This paper present results of an investigation of the lateral-control and hinge-moment characteristics of a 0.67 semispan flap-type spoiler aileron on a semispan thin 60 degree delta wing at transonic speeds by the reflection-plane technique. The spoiler-aileron had a constant chord of 10.29 percent mean aerodynamic chord and was hinged at the 81.9-percent-wing-root-chord station. Tests were made with the spoiler aileron slot open, partially closed, and closed. Incremental rolling-moment coefficients were obtained through a Mach number range of 0.62 to 1.08. Results indicated reasonably linear variations of rolling-moment and hinge-moment coefficients with spoiler projection except at spoiler projections of less than -2 percent mean aerodynamic chord and angles of attack greater than 12 degrees with results generally independent of slot geometry.

Warm Water Compress as an Alternative for Decreasing the Degree of Phlebitis.

Science.gov (United States)

Annisa, Fitri; Nurhaeni, Nani; Wanda, Dessie

Intravenous fluid therapy is an invasive procedure which may increase the risk of patient complications. One of the most common of these is phlebitis, which may cause discomfort and tissue damage. Therefore, a nursing intervention is needed to effectively treat phlebitis. The purpose of this study was to investigate the effectiveness of applying a warm compression intervention to reduce the degree of phlebitis. A quasi-experimental pre-test and post-test design was used, with a non-equivalent control group. The total sample size was 32 patients with degrees of phlebitis ranging from 1 to 4. The total sample was divided into 2 interventional groups: those patients that were given 0.9% NaCl compresses and those given warm water compresses. The results showed that both compresses were effective in reducing the degree of phlebitis, with similar p values (p = .000). However, there was no difference in the average reduction score between the two groups (p = .18). Therefore, a warm water compress is valuable in the treatment of phlebitis, and could decrease the degree of phlebitis both effectively and inexpensively.

Efficient and exact sampling of simple graphs with given arbitrary degree sequence.

Directory of Open Access Journals (Sweden)

Charo I Del Genio

Full Text Available Uniform sampling from graphical realizations of a given degree sequence is a fundamental component in simulation-based measurements of network observables, with applications ranging from epidemics, through social networks to Internet modeling. Existing graph sampling methods are either link-swap based (Markov-Chain Monte Carlo algorithms or stub-matching based (the Configuration Model. Both types are ill-controlled, with typically unknown mixing times for link-swap methods and uncontrolled rejections for the Configuration Model. Here we propose an efficient, polynomial time algorithm that generates statistically independent graph samples with a given, arbitrary, degree sequence. The algorithm provides a weight associated with each sample, allowing the observable to be measured either uniformly over the graph ensemble, or, alternatively, with a desired distribution. Unlike other algorithms, this method always produces a sample, without back-tracking or rejections. Using a central limit theorem-based reasoning, we argue, that for large , and for degree sequences admitting many realizations, the sample weights are expected to have a lognormal distribution. As examples, we apply our algorithm to generate networks with degree sequences drawn from power-law distributions and from binomial distributions.

Prediction of rain effects on earth-space communication links operating in the 10 to 35 GHz frequency range

Science.gov (United States)

Stutzman, Warren L.

1989-01-01

This paper reviews the effects of precipitation on earth-space communication links operating the 10 to 35 GHz frequency range. Emphasis is on the quantitative prediction of rain attenuation and depolarization. Discussions center on the models developed at Virginia Tech. Comments on other models are included as well as literature references to key works. Also included is the system level modeling for dual polarized communication systems with techniques for calculating antenna and propagation medium effects. Simple models for the calculation of average annual attenuation and cross-polarization discrimination (XPD) are presented. Calculation of worst month statistics are also presented.

The Kilo-Degree Survey

NARCIS (Netherlands)

de Jong, J. T. A.; Kuijken, K.; Applegate, D.; Begeman, K.; Belikov, A.; Blake, C.; Bout, J.; Boxhoorn, D.; Buddelmeijer, H.; Buddendiek, A.; Cacciato, M.; Capaccioli, M.; Choi, A.; Cordes, O.; Covone, G.; Dall'Ora, M.; Edge, A.; Erben, T.; Franse, J.; Getman, F.; Grado, A.; Harnois-Deraps, J.; Helmich, E.; Herbonnet, R.; Heymans, C.; Hildebrandt, H.; Hoekstra, H.; Huang, Z.; Irisarri, N.; Joachimi, B.; Köhlinger, F.; Kitching, T.; La Barbera, F.; Lacerda, P.; McFarland, J.; Miller, L.; Nakajima, R.; Napolitano, N. R.; Paolillo, M.; Peacock, J.; Pila-Diez, B.; Puddu, E.; Radovich, M.; Rifatto, A.; Schneider, P.; Schrabback, T.; Sifon, C.; Sikkema, G.; Simon, P.; Sutherland, W.; Tudorica, A.; Valentijn, E.; van der Burg, R.; van Uitert, E.; van Waerbeke, L.; Velander, M.; Kleijn, G. V.; Viola, M.; Vriend, W.-J.

2013-01-01

The Kilo-Degree Survey (KiDS), a 1500-square-degree optical imaging survey with the recently commissioned OmegaCAM wide-field imager on the VLT Survey Telescope (VST), is described. KiDS will image two fields in u-,g-,r- and i-bands and, together with the VIKING survey, produce nine-band (u- to

Enss' theory in long range scattering: Second order hyperbolic and parabolic operators

International Nuclear Information System (INIS)

Muthuramalingam, P.

1984-01-01

We prove asymptotic completeness using Enss' method for h 0 (P)+Wsub(S)(Q)+Wsub(L)(Q) where h 0 :Rsup(n) -> R is a polynomial of degree 2 with lim vertical strokeh 0 (zeta)vertical stroke +/nabla h 0 (zeta)vertical stroke = infinite, Wsub(S) a short range potential and Wsub(L) a smooth long range potential. (orig.)

Degree of Milling Effect on Cold Water Rice Quality

Directory of Open Access Journals (Sweden)

Ujjwol Subedi

2018-05-01

Full Text Available The aim of this study was to examine the effects of degree of milling on various rice parameters such as proximate composition, and cooking properties using mathematical model. The experiments were performed in the laboratory of Food Research Division, Nepal Agricultural Research Council. The three different medium type rice varieties of Nepal (Lumle-2, Chhomrong and Machhapuchre-3 were exposed to five different degrees of milling (0%, 6%, 8%, 10% and 12%. The degree of milling (DM level significantly (P≤0.05 affected the milling recovery; head rice yield, nutrient content as well as cooking properties of the rice. Increase in DM resulted in further reduction of protein content, fat content, minerals, milled rice and head rice yield after bran layer was further removed. A positive correlation between DM used in present model, amylose content, kernel elongation and gruel solid loss was observed, however, with an increase in DM; amylose content, kernel elongation and gruel solid loss were found to be increased. Adopting 6 to 8% DM for commercial milling of rice might help to prevent quantitative, qualitative and nutritional loss along with retention of good cooking characteristics.

DNA psi-condensation and reentrant decondensation: Effect of the PEG degree of polymerization

NARCIS (Netherlands)

Ramos, J.E.B.; Vries, de R.J.; Neto, J.R.

2005-01-01

¿-Condensation of DNA fragments of about 4 kbp was induced by poly(ethylene glycol) (PEG), with degrees of polymerization ranging from 45 to 182, and univalent salt (NaCl). Using circular dichroism spectroscopy, we were able to accurately determine the critical amount of PEG needed to induce

Surface Impedance of Copper MOB Depending on the Annealing Temperature and Deformation Degree

International Nuclear Information System (INIS)

Kutovoj, V.A.; Nikolaenko, A.A.; Stoev, P.I.; Vinogradov, D.V.

2006-01-01

Results of researches of influence of annealing temperature and deformation degree on mechanical features of copper MOB are presented. It is shown that minimal surface resistance is observed in copper samples that were subject to pre-deformation and were annealed in the range of temperatures 873...923 K

50 CFR 30.2 - Disposition of surplus range animals.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Disposition of surplus range animals. 30.2... (CONTINUED) THE NATIONAL WILDLIFE REFUGE SYSTEM RANGE AND FERAL ANIMAL MANAGEMENT Range Animals § 30.2 Disposition of surplus range animals. Disposition shall be made only during regularly scheduled disposal...

Computational dosimetry in embryos exposed to electromagnetic plane waves over the frequency range of 10 MHz-1.5 GHz

International Nuclear Information System (INIS)

Kawai, Hiroki; Nagaoka, Tomoaki; Watanabe, Soichi; Saito, Kazuyuki; Takahashi, Masaharu; Ito, Koichi

2010-01-01

This paper presents calculated specific absorption rate (SAR) dosimetry in 4 and 8 week Japanese pregnant-woman models exposed to plane waves over the frequency range of 10 MHz-1.5 GHz. Two types of 2 mm spatial-resolution pregnant-woman models comprised a woman model, which is similar to the average-sized Japanese adult female in height and weight, with a cubic (4 week) embryo or spheroidal (8 week) one. The averaged SAR in the embryos exposed to vertically and horizontally polarized plane waves at four kinds of propagation directions are calculated from 10 MHz to 1.5 GHz. The results indicate that the maximum average SAR in the embryos exposed to plane waves is lower than 0.08 W kg -1 when the incident power density is at the reference level of ICNIRP guideline for general public environment. (note)

Final report on key comparison APMP.M.P-K3: Absolute pressure measurements in gas from 3 × 10-6 Pa to 9 × 10-4 Pa

Science.gov (United States)

Yoshida, H.; Arai, K.; Akimichi, H.; Hong, S. S.; Song, H. W.

2011-01-01

The results of a key comparison of ultra-high vacuum standards at two national metrology institutes (NMIJ/AIST and KRISS) are reported. This bilateral comparison was carried out from May 2010 to October 2010 within the framework of the Asia-Pacific Metrology Programme (APMP) to determine their degrees of equivalence at pressures in the range from 3 × 10-6 Pa to 9 × 10-4 Pa. The pilot institute was NMIJ/AIST. Two spinning rotor gauges and two hot cathode ionization gauges were used as the transfer standards. NMIJ/AIST used two calibration systems: the dynamic expansion system (NMIJ-DES) and two-stage flow-dividing system (NMIJ-TFS). KRISS used the dynamic expansion system. The transfer standards were sufficiently stable to meet the requirements of the comparison compared with those of previous international comparisons owing to some improvements of the protocol and the transfer standards. The ultra-high vacuum standards of NMIJ/AIST and KRISS were found to be equivalent within their claimed uncertainties in the range from 3 × 10-6 Pa to 9 × 10-5 Pa. The NMIJ-DES results, which have smaller uncertainty than NMIJ-TFS, were transferred to the corresponding CCM key comparison, CCM.P-K3, in the range from 3 × 10-6 Pa to 9 × 10-5 Pa and it is shown that the NMIJ values were equivalent to the CCM key comparison reference value within the claimed uncertainties. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Double 90 Degrees Counterrotated End-to-End-Anastomosis: An Experimental Study of an Intestinal Anastomosis Technique.

Science.gov (United States)

Holzner, Philipp; Kulemann, Birte; Seifert, Gabriel; Glatz, Torben; Chikhladze, Sophia; Höppner, Jens; Hopt, Ulrich; Timme, Sylvia; Bronsert, Peter; Sick, Olivia; Zhou, Cheng; Marjanovic, Goran

2015-06-01

The aim of the article is to investigate a new anastomotic technique compared with standardized intestinal anastomotic procedures. A total of 32 male Wistar rats were randomized to three groups. In the Experimental Group (n = 10), the new double 90 degrees inversely rotated anastomosis was used, in the End Group (n = 10) a single-layer end-to-end anastomosis, and in the Side Group (n = 12) a single-layer side-to-side anastomosis. All anastomoses were done using interrupted sutures. On postoperative day 4, rats were relaparotomized. Bursting pressure, hydroxyproline concentration, a semiquantitative adhesion score and two histological anastomotic healing scores (mucosal healing according to Chiu and overall anastomotic healing according to Verhofstad) were collected. Most data are presented as median (range). p < 0.05 was considered significant. Anastomotic insufficiency occurred only in one rat of the Side Group. Median bursting pressure in the Experimental Group was 105 mm Hg (range = 72-161 mm Hg), significantly higher in the End Group (164 mm Hg; range = 99-210 mm Hg; p = 0.021) and lower in the Side Group by trend (81 mm Hg; range = 59-122 mm Hg; p = 0.093). Hydroxyproline concentration did not differ significantly in between the groups. The adhesion score was 2.5 (range = 1-3) in the Experimental Group, 2 (range = 1-2) in the End Group, but there were significantly more adhesions in the Side Group (range = 3-4); p = 0.020 versus Experimental Group, p < 0.001 versus End Group. The Chiu Score showed the worst mucosal healing in the Experimental Group. The overall Verhofstad Score was significantly worse (mean = 2.032; standard deviation [SD] = 0.842) p = 0.031 and p = 0.002 in the Experimental Group, compared with the Side Group (mean = 1.729; SD = 0.682) and the End Group (mean = 1.571; SD = 0.612). The new anastomotic technique is feasible and did not show any relevant complication. Even though it was superior to the side-to-side anastomosis by trend with

Improved Degree Search Algorithms in Unstructured P2P Networks

Directory of Open Access Journals (Sweden)

Guole Liu

2012-01-01

Full Text Available Searching and retrieving the demanded correct information is one important problem in networks; especially, designing an efficient search algorithm is a key challenge in unstructured peer-to-peer (P2P networks. Breadth-first search (BFS and depth-first search (DFS are the current two typical search methods. BFS-based algorithms show the perfect performance in the aspect of search success rate of network resources, while bringing the huge search messages. On the contrary, DFS-based algorithms reduce the search message quantity and also cause the dropping of search success ratio. To address the problem that only one of performances is excellent, we propose two memory function degree search algorithms: memory function maximum degree algorithm (MD and memory function preference degree algorithm (PD. We study their performance including the search success rate and the search message quantity in different networks, which are scale-free networks, random graph networks, and small-world networks. Simulations show that the two performances are both excellent at the same time, and the performances are improved at least 10 times.

Cosmic rays: the spectrum and chemical composition from 10{sup 10} to 10{sup 20} eV

Energy Technology Data Exchange (ETDEWEB)

Peixoto, C.J. Todero; De Souza, Vitor [Instituto de Física de São Carlos, Universidade de São Paulo, Av. Trabalhador São-carlense 400, São Carlos (Brazil); Biermann, Peter L., E-mail: toderocj@usp.br, E-mail: vitor@ifsc.usp.br, E-mail: plbiermann@mpifr-bonn.mpg.de [Max-Planck-Institute for Radioastronomy, Auf dem Hügel 69, 53121 Bonn (Germany)

2015-07-01

The production of energetic particles in the universe remains one of the great mysteries of modern science. The mechanisms of acceleration in astrophysical sources and the details about the propagation through the galactic and extragalactic media are still to be defined. In recent years, the cosmic ray flux has been measured with high precision in the energy range from 10{sup 10} to 10{sup 20.5} eV by several experiments using different techniques. In some energy ranges, it has been possible to determine the flux of individual elements (hydrogen to iron nuclei). This paper explores an astrophysical scenario in which only our Galaxy and the radio galaxy Cen A produce all particles measured on Earth in the energy range from 10{sup 10} to 10{sup 20.5} eV . Data from AMS-02, CREAM, KASCADE, KASCADE-Grande and the Pierre Auger Observatories are considered. The model developed here is compared to the total and if available to the individual particle flux of the experiments considered.The flux of each element as determined by AMS-02, CREAM, KASCADE and KASCADE-Grande and the mass sensitivity parameter X{sub max} measured by the Pierre Auger Observatory above 10 eV are also explored within the framework of the model. The transition from 10{sup 16} to 10{sup 18} eV is carefully analyzed. It is shown that the flux measured in this energy range suggest the existence of an extra component of cosmic rays yet to be understood.

How Japanese companion dog and cat owners’ degree of attachment relates to the attribution of emotions to their animals

Science.gov (United States)

Koda, Naoko; Martens, Pim

2018-01-01

Recently, studies in the United States and European countries have shown that the degree of attachment is associated with the attribution of emotions to companion animals. These studies imply that investigating the degree of attachment to companion animals is a good way for researchers to explore animal emotions and then improve animal welfare. Although a promising area of study, in Japan, no empirical studies have examined the correlation between the degree of attachment and the attribution of emotions to companion animals. In this research, we aimed to assess companion animal owners’ attribution of six primary (anger, joy, sadness, disgust, fear and surprise) and four secondary (shame, jealousy, disappointment and compassion) emotions to their dogs and cats, as well as how the degree of attachment related to such attribution of emotions from a Japanese cultural perspective. The “Pet Bonding Scale” (PBS), which is used to determine the level of bonding between humans and animals, was introduced to measure respondents’ degree of attachment to their companion animals. The results of a questionnaire (N = 546) distributed throughout Japan showed that respondents attributed a wide range of emotions to their animals. Companion animals’ primary emotions, compared to secondary emotions, were more commonly attributed by their owners. The attribution of compassion and jealousy was reported at a high level (73.1% and 56.2%, respectively), which was surprising as compassion and jealousy are generally defined as secondary emotions. All participants were highly attached to their companion animals, and this attachment was positively associated with the attribution of emotions (9/10) to companion animals (all p animal emotions by analyzing the bonding between companion animals and owners in Japan, and it can therefore provide knowledge to increase Japanese people’s awareness of animal welfare. PMID:29304166

How Japanese companion dog and cat owners' degree of attachment relates to the attribution of emotions to their animals.

Science.gov (United States)

Su, Bingtao; Koda, Naoko; Martens, Pim

2018-01-01

Recently, studies in the United States and European countries have shown that the degree of attachment is associated with the attribution of emotions to companion animals. These studies imply that investigating the degree of attachment to companion animals is a good way for researchers to explore animal emotions and then improve animal welfare. Although a promising area of study, in Japan, no empirical studies have examined the correlation between the degree of attachment and the attribution of emotions to companion animals. In this research, we aimed to assess companion animal owners' attribution of six primary (anger, joy, sadness, disgust, fear and surprise) and four secondary (shame, jealousy, disappointment and compassion) emotions to their dogs and cats, as well as how the degree of attachment related to such attribution of emotions from a Japanese cultural perspective. The "Pet Bonding Scale" (PBS), which is used to determine the level of bonding between humans and animals, was introduced to measure respondents' degree of attachment to their companion animals. The results of a questionnaire (N = 546) distributed throughout Japan showed that respondents attributed a wide range of emotions to their animals. Companion animals' primary emotions, compared to secondary emotions, were more commonly attributed by their owners. The attribution of compassion and jealousy was reported at a high level (73.1% and 56.2%, respectively), which was surprising as compassion and jealousy are generally defined as secondary emotions. All participants were highly attached to their companion animals, and this attachment was positively associated with the attribution of emotions (9/10) to companion animals (all p animal emotions by analyzing the bonding between companion animals and owners in Japan, and it can therefore provide knowledge to increase Japanese people's awareness of animal welfare.

How Japanese companion dog and cat owners' degree of attachment relates to the attribution of emotions to their animals.

Directory of Open Access Journals (Sweden)

Bingtao Su

Full Text Available Recently, studies in the United States and European countries have shown that the degree of attachment is associated with the attribution of emotions to companion animals. These studies imply that investigating the degree of attachment to companion animals is a good way for researchers to explore animal emotions and then improve animal welfare. Although a promising area of study, in Japan, no empirical studies have examined the correlation between the degree of attachment and the attribution of emotions to companion animals. In this research, we aimed to assess companion animal owners' attribution of six primary (anger, joy, sadness, disgust, fear and surprise and four secondary (shame, jealousy, disappointment and compassion emotions to their dogs and cats, as well as how the degree of attachment related to such attribution of emotions from a Japanese cultural perspective. The "Pet Bonding Scale" (PBS, which is used to determine the level of bonding between humans and animals, was introduced to measure respondents' degree of attachment to their companion animals. The results of a questionnaire (N = 546 distributed throughout Japan showed that respondents attributed a wide range of emotions to their animals. Companion animals' primary emotions, compared to secondary emotions, were more commonly attributed by their owners. The attribution of compassion and jealousy was reported at a high level (73.1% and 56.2%, respectively, which was surprising as compassion and jealousy are generally defined as secondary emotions. All participants were highly attached to their companion animals, and this attachment was positively associated with the attribution of emotions (9/10 to companion animals (all p < 0.05. This study is one of the first to investigate animal emotions by analyzing the bonding between companion animals and owners in Japan, and it can therefore provide knowledge to increase Japanese people's awareness of animal welfare.

Families of Smooth Rational Curves of Small Degree on the Fano Variety of Degree 5 of Main Series

Directory of Open Access Journals (Sweden)

M. S. Omelkova

2013-01-01

Full Text Available In this paper we consider some families of smooth rational curves of degree 2, 3 and 4 on a smooth Fano threefold X which is a linear section of the Grassmanian G(1, 4 under the Pl¨ucker embedding. We prove that these families are irreducible. The proof of the irreducibility of the families of curves of degree d is based on the study of degeneration of a rational curve of degree d into a curve which decomposes into an irreducible rational curve of degree d−1 and a projective line intersecting transversally at a point. We prove that the Hilbert scheme of curves of degree d on X is smooth at the point corresponding to such a reducible curve. Then calculations in the framework of deformation theory show that such a curve varies into a smooth rational curve of degree d. Thus, the set of reducible curves of degree d of the above type lies in the closure of a unique component of the Hilbert scheme of smooth rational curves of degree d on X. From this fact and the irreducibility of the Hilbert scheme of smooth rational curves of degree d on the Grassmannian G(1, 4 one deduces the irreducibility of the Hilbert scheme of smooth rational curves of degree d on a general Fano threefold X.

45 CFR 2400.41 - Degree programs.

Science.gov (United States)

2010-10-01

... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related master's degree in education that permits a concentration in American history, American government, social studies...

Modelling the long-range transport of secondary PM 10 to the UK

Science.gov (United States)

Malcolm, A. L.; Derwent, R. G.; Maryon, R. H.

The fine fraction of airborne particulate matter (PM 10) is known to be harmful to human health. In order to establish how current air quality standards can best be met now and in the future, it is necessary to understand the cause of PM 10 episodes. The UK Met Office's dispersion model, NAME, has been used to model hourly concentrations of sulphate aerosol for 1996 at a number of UK locations. The model output has been compared with measured values of PM 10 or sulphate aerosol at these sites and used to provide attribution information. In particular two large PM 10 episodes in March and July 1996 have been studied. The March episode has been shown to be the result of imported pollution from outside the UK, whereas the July case was dominated by UK emissions. This work highlights the need to consider trans-boundary pollution when setting air quality standards and when making policy decisions on emissions.

Radiocarbon analysis of BC and OC in PM10 aerosols at Cape Hedo, Okinawa, Japan, during long-range transport events from East Asian countries

International Nuclear Information System (INIS)

Handa, Daishi; Nakajima, Hitomi; Arakaki, Takemitsu; Kumata, Hidetoshi; Shibata, Yasuyuki; Uchida, Masao

2010-01-01

We determined the 14 C/ 12 C ratio and concentrations of black carbon (BC) and organic carbon (OC) in airborne particulate matter (APM) with diameter 10 ) collected in Okinawa, Japan, between March and June 2008. During Asian dust events in March and April, APM and OC concentrations in PM 10 aerosols were approximately threefold and twofold higher than those during the non-Asian-dust period in June. 'Refractory' BC concentrations (i.e., because of refraction, 10 aerosols collected during the Asian dust events (mean = 41.5% and 62.3%, respectively) than for those collected in the non-Asian-dust period (mean = 67.2% and 93.8%, respectively), indicating a strong influence of fossil-fuel-derived carbon during Asian dust events. One sample showed high OC concentration but relatively low BC concentration, suggesting formation during the long-range transport of biogenic organic compounds. The results suggest that not only fossil-fuel-derived air pollutants but also organic compounds derived from biomass in Asia should be considered to better characterize long-range transported aerosols.

Roadside air particulate monitoring in the PM10 range at the Poveda Learning Center, EDSA, Metro Manila

International Nuclear Information System (INIS)

Santos, Flora L.; Pabroa, Preciosa Corazon B.; Esguerra, Luz V.; Racho, Joseph Michael; Almoneda, Rosalina V.; Sucgang, Raymond

2006-01-01

The Philippine Nuclear Research Institute undertakes air particulate matter monitoring in the PM10 range using a Gent-type dichotomous sampler. Samples are collected in 2 fractions; fine, having a mean aerodynamic diameter below 2.2 microns and coarse, with mean aerodynamic diameter of 2.2-10 microns. The PNRI station at Poveda Learning Center, Mandaluyong, Metro Manila was identified for sample collection under this project. The sampler is located about 100 m. away from the major highway, Epifanio delos Santos Avenue (EDSA), on the roof-deck of a three-story building. Mean annual and 24-hour PM10 levels were found to be below the national standards: 60 ug/cu m annual mean and 150 ug/cu m 24-hour value. Using the Gent sampler, the weight of the fine fraction underestimates PM2.5 by 15%. The sum of the coarse and fine fractions is equal to PM10. The 24-hour value for PM2.2 is generally below the US EPA standard of 65 ug./cu m while the annual mean is generally in exceedance of the long-term standard of 15 ug/cu m. This indicates the need to study current standards and its efficacy in protecting the general population from adverse health effects due to fine particulate pollution. Correlation plots of coarse and fine fractions with PM10 show greater contribution of the coarse fraction to PM10. Contribution of the fine fraction is found to decrease from 36% in 2002, to 29% in 2003 and 20% in 2004. Fine fraction contribution to PM10 at another station, the Ateneo de Manila is 40% for both years. The station at the Ateneo is farther from the road and is exposed to a lower volume of vehicular traffic. High coarse particle contribution to PM10 at the Poveda station could be due to particles resuspended from the road by the vehicles. An increase in the concentration of coarse particles is observed in 2003 which remains at the same level in 2004. Fine particle concentration also increases in 2003 but decreases in 2004, possibly reflecting the impact of government drive

Range of impingement-free abduction and adduction deficit after reverse shoulder arthroplasty. Hierarchy of surgical and implant-design-related factors.

Science.gov (United States)

Gutiérrez, Sergio; Comiskey, Charles A; Luo, Zong-Ping; Pupello, Derek R; Frankle, Mark A

2008-12-01

Evaluations of functional outcomes of reverse shoulder arthroplasty have revealed variable improvements in the range of motion and high rates of scapular notching. The purpose of this study was to systematically examine the impact of surgical factors (location of the glenosphere on the glenoid and tilt angle of the glenosphere on the glenoid) and implant-related factors (implant size, center-of-rotation offset, and humeral neck-shaft angle) on impingement-free abduction motion. A computer model was developed to virtually simulate abduction/adduction motion and its dependence on five surgical and implant-related factors. Three conditions were tested for each factor, resulting in a total of 243 simulated combinations. The overall motion was determined from 0 degrees of abduction until maximum abduction, which would be limited by impingement of the humerosocket on the scapula. In those combinations in which 0 degrees of abduction could not be achieved, the adduction deficit was recorded. The largest average increase in the range of impingement-free abduction motion resulted from a more lateral center-of-rotation offset: the average increase was 31.9 degrees with a change in the center-of-rotation offset from 0 to 10 mm, and this change resulted in an increase in abduction motion in eighty of the eighty-one combinations. The position of the glenosphere on the glenoid was associated with the second largest average increase in abduction motion (28.1 degrees when the glenosphere position was changed from superior to inferior, with the change resulting in an increase in seventy-one of the eighty-one combinations). These factors were followed by glenosphere tilt, humeral neck-shaft angle, and prosthetic size in terms of their effects on abduction motion. The largest effect in terms of avoiding an adduction deficit was provided by a humeral neck-shaft angle of 130 degrees (the deficit was avoided in forty-nine of the eighty-one combinations in which this angle was used

Long-range transport and deposition of sulfur in Asia

International Nuclear Information System (INIS)

Arndt, R.L.; Carmichael, G.R.

1995-01-01

The long range transport of sulfur in Asia is analyzed through the use of a multi-dimensional acid deposition model. The air quality of this region is heavily influenced by the combination of Asia's growing population, its expanding economy, and the associated systems of energy consumption and production. These factors combined with a shift to using indigenous coal as the primary fuel source for the region, will result in increased emissions of pollutants into the environment. By the year 2020 sulfur emissions from Asia are projected to exceed the combined emissions from Europe and North America. The authors have estimated sulfur deposition in Asia on a one-by-one degree spatial resolution in the region from Pakistan to Japan and from Indonesia to Mongolia using a 3-layer Lagrangian model. Deposition in excess of 10 g S/m 2 is predicted in south-central China. The relationship between emission source and receptor has been developed into a deposition matrix and examples of the source-receptor relationship are presented. 11 refs., 2 figs., 2 tabs

teachers say reading and writing in a university degree in the colombian caribbean.

Directory of Open Access Journals (Sweden)

Luis Manuel Cárdenas Cárdenas

2015-03-01

Full Text Available Literacy practices in higher education: what students andThis article is the result of a survey conducted in 10 degrees in a University Colombian Caribbean whose general purpose was to describe, interpret and understand the literacy practices that take place in these degrees. To achieve this article was taken into account one aspect that research in general was conceived as the first specific objective. This aspect refers to the conceptions which teachers and students of the degrees on the teaching and learning of reading and writing academic texts in college. The study usually takes as a theoretical concept of academic literacy. Data collected through classroom observations, also came from surveys and interviews with students and teachers of the degrees. The results of the investigation determined that the teaching and learning of reading and writing in the undergraduate classroom is very limited. The development of pedagogical and didactic classes lacks reading and writing practices. 

Virtual displays for 360-degree video

Science.gov (United States)

Gilbert, Stephen; Boonsuk, Wutthigrai; Kelly, Jonathan W.

2012-03-01

In this paper we describe a novel approach for comparing users' spatial cognition when using different depictions of 360- degree video on a traditional 2D display. By using virtual cameras within a game engine and texture mapping of these camera feeds to an arbitrary shape, we were able to offer users a 360-degree interface composed of four 90-degree views, two 180-degree views, or one 360-degree view of the same interactive environment. An example experiment is described using these interfaces. This technique for creating alternative displays of wide-angle video facilitates the exploration of how compressed or fish-eye distortions affect spatial perception of the environment and can benefit the creation of interfaces for surveillance and remote system teleoperation.

Degree of thoracic kyphosis and peak torque of trunk flexors and extensors among healthy women.

Science.gov (United States)

Granito, Renata Neves; Aveiro, Mariana Chaves; Rennó, Ana Claudia Muniz; Oishi, Jorge; Driusso, Patricia

2014-01-01

The aim of this study was to analyze the effects of aging on the degree of thoracic kyphosis and peak torque of the trunk flexor and extensor muscles among women without a densitometric diagnosis of osteoporosis. Thirty women were selected to make up three groups: young women (n = 10; 24.60 ± 2.27 years of age); adults (n = 10; 43.50 ± 2.88); and elderly women (n = 10; 62.40 ± 2.67). Bone mineral density (BMD), degree of thoracic kyphosis and peak torque of the trunk flexors and extensors were evaluated. Differences between the groups were evaluated using the Kruskal-Wallis ANOVA and Mann-Whitney U tests. Pearson's correlation coefficient was used to assess correlations between the variables. The significance level was taken to be 5% (p ≤ 0.05). The elderly group presented a greater degree of thoracic kyphosis (p = 0.009) and lower peak torque of the trunk flexors and extensors than the young group. The adult group presented lower peak torque of the trunk than the young group. A negative correlation was observed between age and peak torque of the trunk flexors and extensors (p ≤ 0.001), and a positive correlation between age and the degree of thoracic kyphosis (r = 0.58; p ≤ 0.001). The elderly group presented higher values for the eccentric/concentric ratio of the peak torque for flexors (p = 0.03) and extensors (p = 0.02). This study suggests that physiological aging may be associated with a greater degree of thoracic kyphosis and lower muscle strength of the trunk flexors and extensors. Moreover, the elderly women showed a relative capacity for preservation of eccentric strength.

Degree of thoracic kyphosis and peak torque of trunk flexors and extensors among healthy women,

Directory of Open Access Journals (Sweden)

Renata Neves Granito

2014-06-01

Full Text Available OBJECTIVE: The aim of this study was to analyze the effects of aging on the degree of thoracic kyphosis and peak torque of the trunk flexor and extensor muscles among women without a densitometric diagnosis of osteoporosis.METHODS: Thirty women were selected to make up three groups: young women (n = 10; 24.60 ± 2.27 years of age; adults (n = 10; 43.50 ± 2.88; and elderly women (n= 10; 62.40 ± 2.67. Bone mineral density (BMD, degree of thoracic kyphosis and peak torque of the trunk flexors and extensors were evaluated. Differences between the groups were evaluated using the Kruskal-Wallis ANOVA and Mann-Whitney U tests. Pearson's correlation coefficient was used to assess correlations between the variables. The significance level was taken to be 5% (p < 0.05.RESULTS: The elderly group presented a greater degree of thoracic kyphosis (p = 0.009 and lower peak torque of the trunk flexors and extensors than the young group. The adult group presented lower peak torque of the trunk than the young group. A negative correlation was observed between age and peak torque of the trunk flexors and extensors (p < 0.001, and a positive correlation between age and the degree of thoracic kyphosis (r = 0.58; p < 0.001. The elderly group presented higher values for the eccentric/concentric ratio of the peak torque for flexors (p = 0.03 and extensors (p = 0.02.CONCLUSION: This study suggests that physiological aging may be associated with a greater degree of thoracic kyphosis and lower muscle strength of the trunk flexors and extensors. Moreover, the elderly women showed a relative capacity for preservation of eccentric strength.

Master’s Degree Programs of Camarines Norte State College, Philippines: Impact on Its Graduates

Directory of Open Access Journals (Sweden)

Godofredo E. Peteza, Jr.

2017-02-01

Full Text Available This research determined the impact of the master’s degree programs offered in the Graduate School such as Master in Business Administration, Master in Public Administration, Master in Management majors in Human Resource Management and Educational Planning and Management on its graduates from 2009 to 2013. Descriptive-survey method supplemented by interview was employed to identify specifically the profile of the graduates of master’s degree programs in terms of age, sex, civil status, level of appointment before and after taking the master’s degree program, monthly income before and after taking the master’s degree program, number of promotions after graduation, and years in service and the impact of the CNSC Graduate School’s Master’s Degree Programs along professional practice, career development; and employment. Results show that majority of the respondents are in the middle age from 31 -37 years old, married, mostly females, 6-10 years in service and have one promotion after they have graduated from their respective master’s degrees. The level of appointment of the respondents has a positive movement from rank and file to supervisory and managerial levels positions. The Graduate School’s Master’s degree programs provided high impact on the graduates’ professional practice, and on employment while average impact on career development.

Multichannel low power time-to-digital converter card with 21 ps precision and full scale range up to 10 μs

International Nuclear Information System (INIS)

Tamborini, D.; Portaluppi, D.; Villa, F.; Tosi, A.; Tisa, S.

2014-01-01

We present a Time-to-Digital Converter (TDC) card with a compact form factor, suitable for multichannel timing instruments or for integration into more complex systems. The TDC Card provides 10 ps timing resolution over the whole measurement range, which is selectable from 160 ns up to 10 μs, reaching 21 ps rms precision, 1.25% LSB rms differential nonlinearity, up to 3 Mconversion/s with 400 mW power consumption. The I/O edge card connector provides timing data readout through either a parallel bus or a 100 MHz serial interface and further measurement information like input signal rate and valid conversion rate (typically useful for time-correlated single-photon counting application) through an independent serial link

Multichannel low power time-to-digital converter card with 21 ps precision and full scale range up to 10 μs

Energy Technology Data Exchange (ETDEWEB)

Tamborini, D., E-mail: davide.tamborini@polimi.it; Portaluppi, D.; Villa, F.; Tosi, A. [Politecnico di Milano, Dipartimento di Elettronica, Informazione e Bioingegneria, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Tisa, S. [Micro Photon Devices, via Stradivari 4, 39100 Bolzano (Italy)

2014-11-15

We present a Time-to-Digital Converter (TDC) card with a compact form factor, suitable for multichannel timing instruments or for integration into more complex systems. The TDC Card provides 10 ps timing resolution over the whole measurement range, which is selectable from 160 ns up to 10 μs, reaching 21 ps rms precision, 1.25% LSB rms differential nonlinearity, up to 3 Mconversion/s with 400 mW power consumption. The I/O edge card connector provides timing data readout through either a parallel bus or a 100 MHz serial interface and further measurement information like input signal rate and valid conversion rate (typically useful for time-correlated single-photon counting application) through an independent serial link.

Multichannel low power time-to-digital converter card with 21 ps precision and full scale range up to 10 μs.

Science.gov (United States)

Tamborini, D; Portaluppi, D; Villa, F; Tisa, S; Tosi, A

2014-11-01

We present a Time-to-Digital Converter (TDC) card with a compact form factor, suitable for multichannel timing instruments or for integration into more complex systems. The TDC Card provides 10 ps timing resolution over the whole measurement range, which is selectable from 160 ns up to 10 μs, reaching 21 ps rms precision, 1.25% LSB rms differential nonlinearity, up to 3 Mconversion/s with 400 mW power consumption. The I/O edge card connector provides timing data readout through either a parallel bus or a 100 MHz serial interface and further measurement information like input signal rate and valid conversion rate (typically useful for time-correlated single-photon counting application) through an independent serial link.

Measuring Direct Teaching Costs: Does an Undergraduate Business Degree Cost More to Produce than a Nonbusiness Degree?

Science.gov (United States)

Barth, Michael M.; Karagiannidis, Iordanis

2016-01-01

Many universities have implemented tuition differentials for certain undergraduate degree programs, citing higher degree costs or higher demand. However, most college accounting systems are unsuited for measuring cost differentials by degree program. This research outlines a method that can convert commonly available financial data to a more…

Labeling schemes for bounded degree graphs

DEFF Research Database (Denmark)

Adjiashvili, David; Rotbart, Noy Galil

2014-01-01

We investigate adjacency labeling schemes for graphs of bounded degree Δ = O(1). In particular, we present an optimal (up to an additive constant) log n + O(1) adjacency labeling scheme for bounded degree trees. The latter scheme is derived from a labeling scheme for bounded degree outerplanar...... graphs. Our results complement a similar bound recently obtained for bounded depth trees [Fraigniaud and Korman, SODA 2010], and may provide new insights for closing the long standing gap for adjacency in trees [Alstrup and Rauhe, FOCS 2002]. We also provide improved labeling schemes for bounded degree...

Lessons Learned: Creating an Online Business Degree from a Successful On-Campus Business Degree

Science.gov (United States)

Cordeiro, William P.; Muraoka, Dennis

2015-01-01

The horse has left the barn. Distance education is here to stay and the number of degree programs offered online is growing rapidly. California State University Channel Islands (CI) admitted its first students in 2002, and the undergraduate and graduate degrees in business were among its first program offerings. From its inception, the…

Primary standard for the number concentration of liquid-borne particles in the 10 to 20 µm diameter range

Science.gov (United States)

Sakaguchi, T.; Ehara, K.

2011-02-01

The national primary standard for the number concentration of liquid-borne particles in the 10 to 20 µm diameter range has been developed at the National Institute of Advanced Industrial Science and Technology (AIST), Japan. The standard consists of a total number counting type flow cytometer (T-FCM) and an electronic balance. The T-FCM is a commercial flow cytometer modified so that the total number of particles in an aqueous suspension sampled in a test tube can be counted, and the electronic balance is used to determine the mass of the suspension. This standard is intended to be used for calibrating commercial standard suspensions of monodisperse polystyrene latex (PSL) particles. The measurand in the calibration is the mass-based number concentration (the particle number in a unit mass of a suspension), and the calibration capability covers the concentration range from 5 × 102 to 2 × 106 particles g-1. When the concentration of the suspension is higher than 2 × 103 particles g-1, the suspension is first diluted to about 1 × 103 particles g-1 to suppress the coincidence loss in particle counting by the T-FCM. The validity of the calibration with the T-FCM was examined by comparison with an independent method in which a scanning electron microscope (SEM) was used to determine the number concentration of particles deposited on a silicon wafer. For a suspension of 10 µm PSL particles with a concentration of approximately 1 × 106 particles g-1, the concentration values determined by the T-FCM and SEM methods were 1.042 × 106 and 1.035 × 106 particles g-1, respectively: The difference was less than 0.7%. The relative expanded uncertainty of the measurement by the T-FCM method with the coverage factor k = 2 was 4.4%.

Strain rate dependence of twinning at 450 Degree-Sign C and its effect on microstructure of an extruded magnesium alloy

Energy Technology Data Exchange (ETDEWEB)

Ma, Q., E-mail: qma@cavs.msstate.edu [Center for Advanced Vehicular Systems, Mississippi State University, Starkville, MS 39759 (United States); Li, B.; Oppedal, A.L.; Whittington, W.R.; Horstemeyer, S.J.; Marin, E.B.; Wang, P.T. [Center for Advanced Vehicular Systems, Mississippi State University, Starkville, MS 39759 (United States); Horstemeyer, M.F. [Center for Advanced Vehicular Systems, Mississippi State University, Starkville, MS 39759 (United States); Department of Mechanical Engineering, Mississippi State University, Starkville, MS 39762 (United States)

2013-01-01

Deformation twinning in magnesium alloys at elevated temperatures has received relatively little attention because it is generally deemed that dislocation slip dominates plastic deformation. In this work, twinning at 450 Degree-Sign C in an extruded Mg-Al-Mn magnesium alloy (AM30) was studied by interrupted compression tests at various strain rates within a practical range for lab-scale extrusion (<1.0 s{sup -1}). Microstructure and texture evolution were examined by electron backscatter diffraction (EBSD) at different strain levels. The results show that sporadic twins started to appear at strain rate of 0.1 s{sup -1}, whereas profuse twinning was activated at strain rates of 0.5 and 0.8 s{sup -1}. The deformation twins quickly lost original morphology because of dynamic recrystallization. These results show that deformation twinning has a significant effect on microstructural and texture evolution of wrought Mg alloys at elevated temperatures within practical strain rate range.

Design Concept of a Seal-off Type 14 MeV Neutron Generator of 10''1''1n/s Range

Energy Technology Data Exchange (ETDEWEB)

In, S. R.; Oh, B. H. [KAERI, Daejeon (Korea, Republic of)

2015-05-15

The total neutron fluence during the life time is expected to be around 10MW·yr/m''2 which may cause a damage of -100 dpa in materials. To estimate the adaptability of candidate materials in a few years, a 14MeV neutron source with a flux level of 3 - 5 x 10''1''8 n/s·m''2, which is the goal of the IFMIF facility costing more than ¤1000M, is necessitated. The problem in making an intense neutron generator of beam target type is really not on the neutron production rate, but on the huge heat generated in the target, because the fusion power is only one of thousands of beam power exerted on the target. We have a plan to develop neutron generators step by step from a 10''8 n/s level. The final goal is establishing a 14MeV neutron irradiation facility at 10''1''4 intensity level.. Up to the 10''1''0 n/s level, there occurs basically no critical thermal problem, because beam power density is in the range of tens W/cm''2. The neutron generator designed in a sealed-off type because of tritium safety is mainly composed of an ion source, target, reaction chamber, and getter pump.. The major design concepts for the neutron generator with the neutron production rate of 10''1''1 n/s range were presented. The specifications of the ion source, target and getter have been determined for attaining the goal of the neutron generation rate.

Pregnant women maintain body temperatures within safe limits during moderate-intensity aqua-aerobic classes conducted in pools heated up to 33 degrees Celsius: an observational study.

Science.gov (United States)

Brearley, Amanda L; Sherburn, Margaret; Galea, Mary P; Clarke, Sandy J

2015-10-01

What is the body temperature response of healthy pregnant women exercising at moderate intensity in an aqua-aerobics class where the water temperature is in the range of 28 to 33 degrees Celsius, as typically found in community swimming pools? An observational study. One hundred and nine women in the second and third trimester of pregnancy who were enrolled in a standardised aqua-aerobics class. Tympanic temperature was measured at rest pre-immersion (T1), after 35minutes of moderate-intensity aqua-aerobic exercise (T2), after a further 10minutes of light exercise while still in the water (T3) and finally on departure from the facility (T4). The range of water temperatures in seven indoor community pools was 28.8 to 33.4 degrees Celsius. Body temperature increased by a mean of 0.16 degrees Celsius (SD 0.35, ptemperature response was not related to the water temperature (T2 r = -0.01, p = 0.9; T3 r = -0.02, p=0.9; T4 r=0.03, p=0.8). Analysis of variance demonstrated no difference in body temperature response between participants when grouped in the cooler, medium and warmer water temperatures (T2 F=0.94, p=0.40; T3 F=0.93, p=0.40; T4 F=0.70, p=0.50). Healthy pregnant women maintain body temperatures within safe limits during moderate-intensity aqua-aerobic exercise conducted in pools heated up to 33 degrees Celsius. The study provides evidence to inform guidelines for safe water temperatures for aqua-aerobic exercise during pregnancy. Copyright © 2015 Australian Physiotherapy Association. Published by Elsevier B.V. All rights reserved.

The CO poisoning effect in PEMFCs operational at temperatures up to 200 degrees C

DEFF Research Database (Denmark)

Li, Qingfeng; He, Ronghuan; Gao, Ji-An

2003-01-01

The CO poisoning effect on carbon-supported platinum catalysts (at a loading of 0.5 mg Pt/cm(2) per electrode! in polymer electrolyte membrane fuel cells (PEMFCs) has been investigated in a temperature range from 125 to 200 degreesC with the phosphoric acid-doped polybenzimidazole membranes...

Descriptive profile of hip rotation range of motion in elite tennis players and professional baseball pitchers.

Science.gov (United States)

Ellenbecker, Todd S; Ellenbecker, Gail A; Roetert, E Paul; Silva, Rogerio Teixeira; Keuter, Greg; Sperling, Fabio

2007-08-01

Repetitive loading to the hip joint in athletes has been reported as a factor in the development of degenerative joint disease and intra-articular injury. Little information is available on the bilateral symmetry of hip rotational measures in unilaterally dominant upper extremity athletes. Side-to-side differences in hip joint range of motion may be present because of asymmetrical loading in the lower extremities of elite tennis players and professional baseball pitchers. Cohort (cross-sectional) study (prevalence); Level of evidence, 1. Descriptive measures of hip internal and external rotation active range of motion were taken in the prone position of 64 male and 83 female elite tennis players and 101 male professional baseball pitchers using digital photos and computerized angle calculation software. Bilateral differences in active range of motion between the dominant and nondominant hip were compared using paired t tests and Bonferroni correction for hip internal, external, and total rotation range of motion. A Pearson correlation test was used to test the relationship between years of competition and hip rotation active range of motion. No significant bilateral difference (P > .005) was measured for mean hip internal or external rotation for the elite tennis players or the professional baseball pitchers. An analysis of the number of subjects in each group with a bilateral difference in hip rotation greater than 10 degrees identified 17% of the professional baseball pitchers with internal rotation differences and 42% with external rotation differences. Differences in the elite male tennis players occurred in only 15% of the players for internal rotation and 9% in external rotation. Female subjects had differences in 8% and 12% of the players for internal and external rotation, respectively. Statistical differences were found between the mean total arc of hip range of internal and external rotation in the elite tennis players with the dominant side being greater

Degree of muscle fatigue in children with chronic juvenile arthritis

Directory of Open Access Journals (Sweden)

Sekulić Aleksandra

2011-01-01

Full Text Available The aim of our work was to identify gradient of the muscle fatigue of some muscle groups, among children with chronic juvenile arthritis, which are restricted in function by existing limitation in range of motions. Four patients in age of 9,5, with mentioned diagnosis were examined. Healthy subjects, with same ages were control group. Manuel muscle test, range of motion test and EMG examination were performed. Results shown significance difference in degree of muscle fatigue among observed patients, which explain decrease of muscle efficiency and must be taken when intensity of kinesitherapic treatment has to be done. It is concluded that structural changes on locomotory system induce secondary hypertrophy or atrophy of the muscle system and increase of muscle fatigue when activity of certain muscles is performed.

Estimating background denudation rates and delivery of landslide sediment from a time series of 10Be concentrations in landslide dominated basins in the southern Central Range of Taiwan

Science.gov (United States)

Chen, C. Y.; Willett, S.; West, A. J.; Dadson, S. J.; Hovius, N.; Christl, M.; Shyu, J. B. H.

2017-12-01

The southern Central Range of Taiwan is located at a tectonic transition zone between an oceanic subduction zone and the arc-continent collision forming the Taiwan orogen. The rapidly evolving tectonic setting, tropical climate and frequent typhoons result in a complex uplift pattern, transient landscapes and extensive landslides. For this study, we obtained a series of 10Be concentrations over the last decade for 13 major drainage basins in the southern Central Range, bracketing the occurrence of a major typhoon, Morakot, which hit Taiwan in 2009 and triggered thousands of landslides. This time series allows us to simultaneously estimate the background erosion rate and assess the impact of Morakot-triggered landslides on 10Be concentrations. The time series of 10Be concentrations shows temporally lower concentrations of 10Be indicating dilution following the Morakot event in most basins. The diluted 10Be concentrations imply erosion rates up to three times higher than the lowest measured rates in the same basins. We constructed a simple sediment-mixing model parameterized by a sudden input of sediment supplied from landslides superimposed on a background denudation rate. This model was calibrated to measured landslide inventories and the series of 10Be data. We obtain a range of permissible background erosion rate and fraction of landslide sediments over time for each basin. The inferred background erosion rate reveals a northward increasing trend, reflecting the initial stage of the mountain building and indicating tectonic forcing is the main driver of the landscape evolution in the southern Central Range. The temporal changes in fraction of landslide sediments show that the available landslide material generated by the Morakot event is decreasing over time with a timescale of several years.

Pions and other hadronic degrees of freedom in nuclei

International Nuclear Information System (INIS)

Brockmann, B.; Weise, W.

1985-01-01

As ≥E and or ≥q is increased up to several hundreds of MeV, the explicit mesonic degrees of freedom become directly visible. The pion, in particular, is of fundamental importance. With its small mass of m/sub π/ = 140 MeV it is by far the lightest of all mesons. It is the generator of the long range nucleon-nucleon interaction. The pion Compton wavelength psi/sub π/ = Κm/sub π/c = 1.4 fm, defines the length scale of nuclear physics. As mesons become important, nucleons begin to reveal their intrinsic structure. Inseparably connected with pionic degrees of freedom is the role of the Δ(1232), the spin 3/2-isopin 3/2 isobar reached from the nucleon by a strong spin-isopin transition at an excitation energy ΔE = M/sub Δ/ - M ≅ 300 MeV, the Δ-nucleon mass difference. This paper, the position is taken that the nucleus consists of nucleons and their excited states (primarily the ≥ (1232)) which communicate by exchange of mesons (in particular: the pion). Such a description has turned out to be quite successful in correlating various phenomena and data at intermediate energies, remarkably though without the need, so far, for explicit reference to underlying quark degrees of freedom. This progress has gone parallel with the similarly successful meson exchange phenomenology of nucleon-nucleon forces at long and intermediate distances (r ≥ 0.8 fm)

Dielectric and thermophysical properties of different beef meat blends over a temperature range of -18 to +10°C.

Science.gov (United States)

Farag, K W; Lyng, J G; Morgan, D J; Cronin, D A

2008-08-01

Dielectric and thermophysical properties of three different beef meat blends (lean, fat and 50:50 mixture) were evaluated over a range of temperatures from -18 to +10°C. In the region of thawing (-3 to -1°C), dielectric constant (ε') and dielectric loss factor (ε') values for radio frequency (RF) and microwave (MW) were significantly higher (Pproperties of the beef meat blends, with a general tendency towards higher values at the RF frequency. Finally, composition significantly influenced (Pthermophysical properties at all temperatures used. These data are of potential value to food technologists in the context of rapid defrosting of meat products.

Pellet pestle homogenization of agarose gel slices at 45 degrees C for deoxyribonucleic acid extraction.

Science.gov (United States)

Kurien, B T; Kaufman, K M; Harley, J B; Scofield, R H

2001-09-15

A simple method for extracting DNA from agarose gel slices is described. The extraction is rapid and does not involve harsh chemicals or sophisticated equipment. The method involves homogenization of the excised gel slice (in Tris-EDTA buffer), containing the DNA fragment of interest, at 45 degrees C in a microcentrifuge tube with a Kontes pellet pestle for 1 min. The "homogenate" is then centrifuged for 30 s and the supernatant is saved. The "homogenized" agarose is extracted one more time and the supernatant obtained is combined with the previous supernatant. The DNA extracted using this method lent itself to restriction enzyme analysis, ligation, transformation, and expression of functional protein in bacteria. This method was found to be applicable with 0.8, 1.0, and 2.0% agarose gels. DNA fragments varying from 23 to 0.4 kb were extracted using this procedure and a yield ranging from 40 to 90% was obtained. The yield was higher for fragments 2.0 kb and higher (70-90%). This range of efficiency was maintained when the starting material was kept between 10 and 300 ng. The heat step was found to be critical since homogenization at room temperature failed to yield any DNA. Extracting DNA with our method elicited an increased yield (up to twofold) compared with that extracted with a commercial kit. Also, the number of transformants obtained using the DNA extracted with our method was at least twice that obtained using the DNA extracted with the commercial kit. Copyright 2001 Academic Press.

Evolution of the magnetic properties of Co10Cu90 nanoparticles prepared by wet chemistry with thermal annealing.

Science.gov (United States)

García, I; Echeberria, J; Kakazei, G N; Golub, V O; Saliuk, O Y; Ilyn, M; Guslienko, K Y; González, J M

2012-09-01

Nanoparticles of Co10Cu90 alloy have been prepared by sonochemical wet method. According to transmission electron microscopy, bimetallic particles with typical diameter of 50-100 nm consisting of nanocrystallites with average diameter of 15-20 nm were obtained. The samples were annealed at 300 degrees C and 450 degrees C. Zero field cooled and field cooled temperature dependences of magnetization in the temperature range of 5-400 K at 50 Oe, as well as magnetization hysteresis loops at 15, 100 and 305 K were measured by vibrating sample magnetometry. Presence of antiferromagnetic phase, most probably of the oxide Co3O4, was observed in as-prepared sample. The lowest coercivity was found for the CoCu sample annealed at-300 degrees C, whereas for as prepared sample and the one annealed at 450 degrees C it was significantly higher. The samples were additionally probed by continuous wave ferromagnetic resonance at room, temperature using a standard X-band electron spin resonance spectrometer. A good correspondence between evolution of the coercivity and the microwave resonance fields with annealing temperature was observed.

Range distributions in multiply implanted targets

International Nuclear Information System (INIS)

Kostic, S.; Jimenez-Rodriguez, J.J.; Karpuzov, D.S.; Armour, D.G.; Carter, G.; Salford Univ.

1984-01-01

Range distributions in inhomogeneous binary targets have been investigated both theoretically and experimentally. Silicon single crystal targets [(111) orientation] were implanted with 40 keV Pb + ions to fluences in the range from 5x10 14 to 7.5x10 16 cm -2 prior to bombardment with 80 keV Kr + ions to a fluence of 5x10 15 cm -2 . The samples were analysed using high resolution Rutherford backscattering before and after the krypton implantation in order to determine the dependence of the krypton distribution on the amount of lead previously implanted. The theoretical analysis was undertaken using the formalism developed in [1] and the computer simulation was based on the MARLOWE code. The agreement between the experimental, theoretical and computational krypton profiles is very good and the results indicate that accurate prediction of ranges profiles in inhomogeneous binary targets is possible using available theoretical and computational treatments. (orig.)

Degree-Day Prediction Models for the Flight Phenology of Western Bean Cutworm (Lepidoptera: Noctuidae) Assessed with the Concordance Correlation Coefficient.

Science.gov (United States)

Hanson, A A; Moon, R D; Wright, R J; Hunt, T E; Hutchison, W D

2015-08-01

Western bean cutworm, Striacosta albicosta (Smith) (Lepidoptera: Noctuidae), is a native, univoltine pest of corn and dry beans in North America. The current degree-day model for predicting a specified percentage of yearly moth flight involves heat unit accumulation above 10°C after 1 May. However, because the moth's observed range has expanded into the northern and eastern United States, there is concern that suitable temperatures before May could allow for significant S. albicosta development. Daily blacklight moth catch and temperature data from four Nebraska locations were used to construct degree-day models using simple or sine-wave methods, starting dates between 1 January and 1 May, and lower (-5 to 15°C) and upper (20 to 43.3°C) developmental thresholds. Predicted dates of flight from these models were compared with observed flight dates using independent datasets to assess model performance. Model performance was assessed with the concordance correlation coefficient to concurrently evaluate precision and accuracy. The best model for predicting timing of S. albicosta flight used simple degree-day calculations beginning on 1 March, a 3.3°C (38°F) lower threshold, and a 23.9°C (75°F) upper threshold. The revised cumulative flight model indicated field scouting to estimate moth egg density at the time of 25% flight should begin when 1,432 degree-days (2,577 degree-days °F) have accumulated. These results underscore the importance of assessing multiple parameters in phenological models and utilizing appropriate assessment methods, which in this case may allow for improved timing of field scouting for S. albicosta. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Distinct Short-Range Order Is Inherent to Small Amorphous Calcium Carbonate Clusters (<2 nm)

Energy Technology Data Exchange (ETDEWEB)

Sun, Shengtong [Physical Chemistry, University of Konstanz, Universitätsstrasse 10 78457 Konstanz Germany; School of Chemical Engineering, State Key Laboratory of Chemical Engineering, Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, 130 Meilong Road Shanghai 200237 P.R. China; Chevrier, Daniel M. [Department of Chemistry and Institute for Research in Materials, Dalhousie University, Halifax Nova Scotia B3H 4R2 Canada; Zhang, Peng [Department of Chemistry and Institute for Research in Materials, Dalhousie University, Halifax Nova Scotia B3H 4R2 Canada; Gebauer, Denis [Physical Chemistry, University of Konstanz, Universitätsstrasse 10 78457 Konstanz Germany; Cölfen, Helmut [Physical Chemistry, University of Konstanz, Universitätsstrasse 10 78457 Konstanz Germany

2016-09-09

Amorphous intermediate phases are vital precursors in the crystallization of many biogenic minerals. While inherent short-range orders have been found in amorphous calcium carbonates (ACCs) relating to different crystalline forms, it has never been clarified experimentally whether such orders already exist in very small clusters less than 2 nm in size. Here, we studied the stability and structure of 10,12-pentacosadiynoic acid (PCDA) protected ACC clusters with a core size of ca. 1.4 nm consisting of only seven CaCO₃ units. Ligand concentration and structure are shown to be key factors in stabilizing the ACC clusters. More importantly, even in such small CaCO₃ entities, a proto-calcite short-range order can be identified but with a relatively high degree of disorder that arises from the very small size of the CaCO₃ core. Our findings support the notion of a structural link between prenucleation clusters, amorphous intermediates, and final crystalline polymorphs, which appears central to the understanding of polymorph selection.

Pathways to a Four-Year Degree: Determinants of Degree Completion among Socioeconomically Disadvantaged Students.

Science.gov (United States)

Cabrera, Alberto F.; Burkum, Kurt R.; La Nasa, Steven M.

The High School Sophomore Cohort of 1980 followed nine different pathways to a 4-year college degree. These paths were formed by a combination of different levels of academic preparation secured in high school and the first type of postsecondary institution attended. The pathway most likely to lead to a 4-year degree is one defined by acquiring…

Rheological phase synthesis of nanosized α-LiFeO_2 with higher crystallinity degree for cathode material of lithium-ion batteries

International Nuclear Information System (INIS)

Liu, Haowen; Ji, Panyin; Han, Xiaoyan

2016-01-01

In this paper, rheological phase method has been successfully applied to synthesize nanosized α-LiFeO_2, a promising cathode material of lithium-ion batteries. The formation, structure and morphology of the as-prepared powder were characterized by Thermogravimetric and differential thermal analyses (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy (SEM). The particle size of the obtained α-LiFeO_2 ranged from 100 to 300 nm. It exhibited an initial discharge capacity 169 mAh g"−"1 at 0.1 C between 1.5 and 4.3 V, especially excellent cycling retention from the 10th to the 50th cycle (96.8%) between 1.5 and 4.3 V. The higher crystallinity degree might be responsible for the cyclability improvement. - Highlights: • α-LiFeO_2 with higher crystallinity degree has been synthesized. • The obtained samples were investigated by TGA/DTA, FTIR, SEM, XRD. • The prepared α-LiFeO_2 indicated excellent cycling retention.

Autonomous Target Ranging Techniques

DEFF Research Database (Denmark)

Jørgensen, Peter Siegbjørn; Jørgensen, John Leif; Denver, Troelz

2003-01-01

of this telescope, a fast determination of the range to and the motion of the detected targets are important. This is needed in order to prepare the future observation strategy for each target, i.e. when is the closest approach where imaging will be optimal. In order to quickly obtain such a determination two...... ranging strategies are presented. One is an improved laser ranger with an effective range with non-cooperative targets of at least 10,000 km, demonstrated in ground tests. The accuracy of the laser ranging will be approximately 1 m. The laser ranger may furthermore be used for trajectory determination...... of nano-gravity probes, which will perform direct mass measurements of selected targets. The other is triangulation from two spacecraft. For this method it is important to distinguish between detection and tracking range, which will be different for Bering since different instruments are used...

Ranging Behaviour of Commercial Free-Range Broiler Chickens 1: Factors Related to Flock Variability.

Science.gov (United States)

Taylor, Peta S; Hemsworth, Paul H; Groves, Peter J; Gebhardt-Henrich, Sabine G; Rault, Jean-Loup

2017-07-20

Little is known about the ranging behaviour of chickens. Understanding ranging behaviour is required to improve management and shed and range design to ensure optimal ranging opportunities. Using Radio Frequency Identification technology, we tracked 300 individual broiler chickens in each of four mixed sex ROSS 308 flocks on one commercial farm across two seasons. Ranging behaviour was tracked from the first day of range access (21 days of age) until 35 days of age in winter and 44 days of age in summer. Range use was higher than previously reported from scan sampling studies. More chickens accessed the range in summer (81%) than winter (32%; p range use was greater in summer flocks (4.4 ± 0.1 visits for a total of 26.3 ± 0.8 min/day) than winter flocks (3.2 ± 0.2 visits for a total of 7.9 ± 1.0 min/day). Seasonal differences were only marginally explained by weather conditions and may reflect the reduction in range exposure between seasons (number of days, hours per day, and time of day). Specific times of the day ( p ranging and external factors that may explain ranging preferences.

Measurement of the ratio of charged current neutrino cross sections on neutrons and protons in the energy range 1-10 GeV

International Nuclear Information System (INIS)

Lerche, W.; Pohl, M.; Schultze, K.; Derange, B.; Francois, T.; Van Dam, P.; Jaffre, M.; Longuemare, C.; Pascaud, C.; Calimani, E.; Ciampolillo, S.; Mattioli, F.

1978-01-01

The charged current cross-section ratio R = sigma(γ+n)/sigma(γ+p), averaged over the energy range, 1-10 GeV, is determined by two independent methods. The combined value is R = 2.08+-0.15. Semi-inclusive proton production rates on both proton and neutron targets are presented. Event rates of exclusive channels on the proton target are also given. (Auth.)

Radiation-enhanced diffusion in nickel-10.6% chromium alloys

International Nuclear Information System (INIS)

Gieb, M.

1995-01-01

Results of investigations of the diffusion rate of nickel-10.6% chromium alloys after plastic deformation, after quenching from 700 C and from 1030 C, and during irradiation with 18 MeV protons and 1.85 MeV electrons are reported. The diffusion rate is measured by means of the electrical resistivity which increases with increasing degree of short range order. It was found that the characteristic temperature below which short range order develops is T t =550 C. Below about 400 C the atomic mobilities of the component atoms of the alloy are so small that no further increase in the degree of short range order is found in due laboratory times. The activation energy for self-diffusion was determined after quenching from 700 C to Q SD =2.88 eV. For the migration activation energy of vacancies a value of E M 1V =1.18 eV was obtained after quenching from 1030 C. For the migration activation energies of interstitials and vacancies values of E M 1I =1.04 eV and E M 1V =1.16 eV are derived from results of measurements of radiation enhanced diffusion, respectively. These values decrease with increasing high energy particle flux. The characteristic temperature for interstitial cluster formation is T t =300 C. Above this temperature radiation-induced interstitials and vacancies annihilate mainly by pair recombination. Below this temperature interstitials also annihilate at sinks which are formed during irradiation so that the concentration of vacancies increases with irradiation time. Their migration activation energy is approximately obtained in a straight-forward way from the experimental data. Above about 380 C the radiation enhanced diffusion rate is surprisingly much smaller than the thermal diffusion rate. The quasi-dynamic vacancy concentration built up during irradiation is much smaller than the thermal vacancy concentration. (orig.)

Development of disposable membrane hydrophones for a frequency range from 1MHz to 10MHz.

Science.gov (United States)

Lee, Jae-Wan; Ohm, Won-Suk; Kim, Yong-Tae

2017-11-01

A method for fabricating disposable membrane hydrophones is presented. The disposable hydrophones are intended for onetime use in such damaging environments as chemically contaminating fluids and high-amplitude (peak amplitude ∼100MPa) shock wave fields, where the use of commercial membrane hydrophones is not recommended. Fabrication of a hydrophone is done using only off-the-shelf components and hand tools, which translates into ease of fabrication and orders-of-magnitude reduction in unit cost. In particular, poling and sputtering, the two processes that are chiefly responsible for the cost and difficulty associated with the conventional fabrication method, are replaced with the use of pre-poled polyvinylidene fluoride (PVDF) films and polyethylene terephthalate (PET)-coated aluminum foils, respectively. Despite the seemingly crude construction, these disposable hydrophones can exhibit voltage sensitivity response that compares favorably with that of commercial hydrophones. For example, one prototype having a 2mm×2mm active element shows the end-of-cable voltage sensitivity of -270 (±1.9) dB re 1V/μPa over the frequency range of 1-10MHz. Copyright © 2017 Elsevier B.V. All rights reserved.

New-generation curing units and short irradiation time: the degree of conversion of microhybrid composite resin.

Science.gov (United States)

Scotti, Nicolla; Venturello, Alberto; Migliaretti, Giuseppe; Pera, Francesco; Pasqualini, Damiano; Geobaldo, Francesco; Berutti, Elio

2011-09-01

This in vitro study investigated the depth of cure of a microhybrid composite resin when cured with reduced times of exposure to three commercially available curing lights. Different sample thicknesses (1, 2, and 3 mm) were light cured in high intensity polymerization mode (2,400 mW/cm² for 5, 10, 15, and 20 seconds; 1,100 mW/cm² for 10, 20, 30, and 40 seconds; and 1,100 mW/cm² for 10, 20, 30, and 40 seconds, respectively). The degree of conversion (%) at the bottom of each sample was measured by Attenuated Total Reflection Fourier Transform Infrared (ATR F-TIR) analysis after each polymerization step. Data were analyzed by ANOVA for repeated measures, showing the degree of conversion was not influenced by the curing light employed (P = .622) but was significantly influenced by the thickness of composite resin (P conversion vs the shorter irradiation time permitted (T1) were not significant among different lamps but were significant among different thicknesses. The depth of cure of microhybrid composite resin appears not to be influenced by the curing light employed. Increased irradiation time significantly increases the degree of conversion. Thickness strongly influences depth of cure.

Explaining life history variation in a changing climate across a species' range

DEFF Research Database (Denmark)

Neuheimer, Anna B.; MacKenzie, Brian R.

2014-01-01

Timing of reproduction greatly influences offspring success and resulting population production. Explaining and predicting species' dynamics necessitates disentangling the intrinsic (genotypic) and extrinsic (climatic) factors controlling reproductive timing. Here we explore temporal and spatial...... changes in spawning time for 21 populations of Atlantic cod (Gadus morhua) across the species' range (40 degrees to 80 degrees N). We estimate spawning time using a physiologically relevant metric that includes information on fish thermal history (degree-days, DD). First, we estimate spawning DD among...... years (within populations) to show how recent changes in spawning time can be explained by local changes in temperature. Second, we employ spawning DD to identify temperature-independent trends in spawning time among populations that are consistent with parallel adaptive evolution and the evolutionary...

Influence of year-on-year performance on final degree classification in a chiropractic master's degree program.

Science.gov (United States)

Dewhurst, Philip; Rix, Jacqueline; Newell, David

2016-03-01

We explored if any predictors of success could be identified from end-of-year grades in a chiropractic master's program and whether these grades could predict final-year grade performance and year-on-year performance. End-of-year average grades and module grades for a single cohort of students covering all academic results for years 1-4 of the 2013 graduating class were used for this analysis. Analysis consisted of within-year correlations of module grades with end-of-year average grades, linear regression models for continuous data, and logistic regression models for predicting final degree classifications. In year 1, 140 students were enrolled; 85.7% of students completed the program 4 years later. End-of-year average grades for years 1-3 were correlated (Pearson r values ranging from .75 to .87), but the end-of-year grades for years 1-3 were poorly correlated with clinic internship performance. In linear regression, several modules were predictive of end-of-year average grades for each year. For year 1, logistic regression showed that the modules Physiology and Pharmacology and Investigative Imaging were predictive of year 1 performance (odds ratio [OR] = 1.15 and 0.9, respectively). In year 3, the modules Anatomy and Histopathology 3 and Problem Solving were predictors of the difference between a pass/merit or distinction final degree classification (OR = 1.06 and 1.12, respectively). Early academic performance is weakly correlated with final-year clinic internship performance. The modules of Anatomy and Histopathology year 3 and Problem Solving year 3 emerged more consistently than other modules as being associated with final-year classifications.

Embedding generic employability skills in an accounting degree: development and impediments

OpenAIRE

Stoner, G.; Milner, M.

2010-01-01

This paper explores and analyses the views of, and effects on, students of a project that integrated the development of employability skills within the small group classes of two compulsory courses in the first year of an accounting degree at a UK university. The project aimed to build, deliver and evaluate course materials designed to encourage the development of a broad range of employability skills: skills needed for life-long learning and a successful business career. By analysing student...

Factors controlling degree of correlation between ISEE 1 and ISEE 3 interplanetary magnetic field measurements

International Nuclear Information System (INIS)

Crooker, N.U.; Siscoe, G.L.; Russell, C.T.; Smith, E.J.

1982-01-01

The degree of correlation between ISEE 1 and ISEE 3 IMF measurements is highly variable. Approximately 200 two-hour periods when the correlation was good and 200 more when the correlation was poor are used to determine the relative control of several factors over the degree of correlation. Both IMF variance and spacecraft separation distance in the plane perpendicular to the earth-sun line exert substantial control. Good correlations are associated with high variance and distances less than 90 R/sub E/. During periods of highest variance, good correlations occur at distances beyond 90 R/sub E/ up to 120 R/sub E/, the maximum range of ISEE 1-ISEE 3 separation. Thus it appears that the scale size of magnetic features is larger when the variance is high. Abrupt changes in the correlation coefficient from poor to good or good to poor in adjacent two-hour intervals appear to be governed by the sense of change of IMF variance: changes in correlation from poor to good correspond to increasing variance and vice versa. The IMF orientation also exerts control over the degree of correlation. During periods of low variance, good correlations are most likely to occur when the distance between ISEE 1 and ISEE 3 perpendicular to the IMF is less than 20 R/sub E/. This scale size expands to approx.50 R/sub E/ during periods of high variance. Solar wind speed shows little control over the degree of correlation in the speed range 300--500 km/s

The cosmic ray primary composition between $10^{15}$ and $10^{16}$ ev from Extensive Air Showers electromagnetic and TeV muon data

CERN Document Server

Aglietta, M; Ambrosio, M; Antolini, R; Antonioli, P; Arneodo, F; Baldini, A; Barbarino, G C; Barish, B C; Battistoni, G; Becherini, Y; Bellotti, R; Bemporad, C; Bergamasco, L; Bernardini, P; Bertaina, M; Bilokon, H; Bower, C; Brigida, M; Bussino, S; Cafagna, F; Calicchio, M; Campana, D; Carboni, M; Caruso, R; Castagnoli, C; Castellina, A; Cecchini, S; Cei, F; Chiarella, V; Chiavassa, A; Choudhary, B C; Cini, G; Coutu, S; Cozzi, M; D'Ettorre-Piazzoli, B; De Cataldo, G; De Marzo, C; De Mitri, I; De Vincenzi, M; Dekhissi, H; Derkaoui, J; Di Credico, A; Di Sciascio, G; Erriquez, O; Favuzzi, C; Forti, C; Fulgione, W; Fusco, P; Galeotti, P; Ghia, P L; Giacomelli, G; Giannini, G; Giglietto, N; Giorgini, M; Grassi, M; Grillo, A; Guarino, F; Gustavino, C; Habig, A; Hanson, K; Heinz, R; Iacovacci, M; Iarocci, E; Katsavounidis, E; Katsavounidis, I; Kearns, E; Kim, H; Kyriazopoulou, S; Lamanna, E; Lane, C; Levin, D S; Lipari, P; Longley, N P; Longo, M J; Loparco, F; Maaroufi, F; Mancarella, G; Mandrioli, G; Mannocchi, G; Margiotta, A; Marini, A; Martello, D; Marzari-Chiesa, A; Mazziotta, M N; Michael, D G; Monacelli, P; Montaruli, T; Monteno, M; Morello, C; Mufson, S; Musser, J; Navarra, G; Nicolò, D; Nolty, R; Orth, C; Osteria, G; Palamara, O; Patera, V; Patrizii, L; Pazzi, R; Peck, C W; Perrone, L; Petrera, S; Popa, V; Rainó, A; Reynoldson, J; Ronga, F; Saavedra, O; Satriano, C; Scapparone, E; Scholberg, K; Sciubba, A; Serra, P; Sioli, M; Sirri, G; Sitta, M; Spinelli, P; Spinetti, M; Spurio, M; Stamerra, A; Steinberg, R; Stone, J L; Sulak, L R; Surdo, A; Tarle, G; Togo, V; Trinchero, G C; Vakili, M; Valchierotti, S; Vallania, P; Vernetto, S; Vigorito, C; Walter, C W; Webb, R; 10.1016/j.astropartphys.2003.10.004

2004-01-01

The cosmic ray primary composition in the energy range between 10/sup 15/ and 10/sup 16/ eV, i.e., around the "knee" of the primary spectrum, has been studied through the combined measurements of the EAS-TOP air shower array (2005 m a.s.l., 10/sup 5/ m/sup 2/ collecting area) and the MACRO underground detector (963 m a.s.l., 3100 m w.e. of minimum rock overburden, 920 m/sup 2/ effective area) at the National Gran Sasso Laboratories. The used observables are the air shower size (N/sub e/) measured by EAS-TOP and the muon number (N /sub mu /) recorded by MACRO, The two detectors are separated on average by 1200 m of rock, and located at a respective zenith angle of about 30 degrees . The energy threshold at the surface for muons reaching the MACRO depth is approximately 1.3 TeV. Such muons are produced in the early stages of the shower development and in a kinematic region quite different from the one relevant for the usual N/sub mu /-N/sub e/ studies. The measurement leads to a primary composition becoming hea...

MEMS 6 degrees of freedom parallel micro manipulator for TEM sample manipulation

NARCIS (Netherlands)

Brouwer, Dannis Michel; de Jong, B.R.; Soemers, Herman

2005-01-01

Up till now MEMS actuators acted either only in-plane or only out-of plane restricting to 3 DOF manipulation. A design for a millimeter-sized manipulator with 6 degrees of freedom to manipulate a micron-sized substrate at nanometer resolution over strokes of 10 microns with a position stability

Comparison of pharmacokinetic variables for creatinine and iohexol in dogs with various degrees of renal function.

Science.gov (United States)

Collignon, Cécile M; Heiene, Reidun; Queau, Yann; Reynolds, Brice S; Craig, Amanda J; Concordet, Didier; Harran, Nathaniel X; Risøen, Unni; Balouka, David; Faucher, Mathieu R; Eliassen, Knut A; Biourge, Vincent; Lefebvre, Hervé P

2012-11-01

To compare pharmacokinetics and clearances of creatinine and iohexol as estimates of glomerular filtration rate (GFR) in dogs with various degrees of renal function. 50 Great Anglo-Francais Tricolor Hounds with various degrees of renal function. Boluses of iohexol (40 mg/kg) and creatinine (647 mg/kg) were injected IV. Blood samples were collected before administration and 5 and 10 minutes and 1, 2, 4, 6, and 8 hours after administration. Plasma creatinine and iohexol concentrations were assayed via an enzymatic method and high-performance liquid chromatography, respectively. A noncompartmental approach was used for pharmacokinetic analysis. Pharmacokinetic variables were compared via a Bland-Altman plot and an ANOVA. Compared with results for creatinine, iohexol had a significantly higher mean ± SD plasma clearance (3.4 ± 0.8 mL/min/kg vs 3.0 ± 0.7 mL/min/kg) and a significantly lower mean volume of distribution at steady state (250 ± 37 mL/kg vs 539 ± 73 mL/kg), mean residence time (80 ± 31 minutes vs 195 ± 73 minutes), and mean elimination half-life (74 ± 20 minutes vs 173 ± 53 minutes). Despite discrepancies between clearances, especially for high values, the difference was dogs. Three dogs with a low GFR (dogs with a GFR within or above the reference range.

Physics to a degree

CERN Document Server

Thomas, EG

2014-01-01

Physics to a Degree provides an extensive collection of problems suitable for self-study or tutorial and group work at the level of an undergraduate physics course. This novel set of exercises draws together the core elements of an undergraduate physics degree and provides students with the problem solving skills needed for general physics' examinations and for real-life situations encountered by the professional physicist. Topics include force, momentum, gravitation, Bernoulli's Theorem, magnetic fields, blackbody radiation, relativistic travel, mechanics near the speed of light, radioactive

A MATLAB-based graphical user interface program for computing functionals of the geopotential up to ultra-high degrees and orders

Science.gov (United States)

Bucha, Blažej; Janák, Juraj

2013-07-01

We present a novel graphical user interface program GrafLab (GRAvity Field LABoratory) for spherical harmonic synthesis (SHS) created in MATLAB®. This program allows to comfortably compute 38 various functionals of the geopotential up to ultra-high degrees and orders of spherical harmonic expansion. For the most difficult part of the SHS, namely the evaluation of the fully normalized associated Legendre functions (fnALFs), we used three different approaches according to required maximum degree: (i) the standard forward column method (up to maximum degree 1800, in some cases up to degree 2190); (ii) the modified forward column method combined with Horner's scheme (up to maximum degree 2700); (iii) the extended-range arithmetic (up to an arbitrary maximum degree). For the maximum degree 2190, the SHS with fnALFs evaluated using the extended-range arithmetic approach takes only approximately 2-3 times longer than its standard arithmetic counterpart, i.e. the standard forward column method. In the GrafLab, the functionals of the geopotential can be evaluated on a regular grid or point-wise, while the input coordinates can either be read from a data file or entered manually. For the computation on a regular grid we decided to apply the lumped coefficients approach due to significant time-efficiency of this method. Furthermore, if a full variance-covariances matrix of spherical harmonic coefficients is available, it is possible to compute the commission errors of the functionals. When computing on a regular grid, the output functionals or their commission errors may be depicted on a map using automatically selected cartographic projection.

Does a bachelor’s degree pay off?

DEFF Research Database (Denmark)

Neugebauer, Martin; Weiss, Felix

Academic education is generally rewarded by employers, but what happens to graduates if they are trained for two years less and have to compete with vocationally trained labor market entrants in a similar field of study? Focusing on Germany, we analyze labor market entries of individuals eligible...... for higher education, who either opted for newly introduced short bachelor’s degrees, or for well-established vocational degrees. Based on Microcensus data, we find that bachelor’s degrees from classical universities are associated with higher earnings and more prestigious jobs than initial vocational...... training degrees, and with higher prestige (but similar earnings) than further vocational degrees. However, bachelor’s degrees from universities are also related to higher risks of unemployment or fixed-term employment. Universities of applied sciences, which combine academic and practical training, offer...

Astrometric studies of the regions BD + 17 degree 4946, BD -5 degree 3071, and Ross 730-1

International Nuclear Information System (INIS)

Russell, J.; Gatewood, G.

1975-01-01

Positions, proper motions, and absolute parallaxes were found for 46 stars in the regions of BD +17 degree4946, BD -5 degree3071, and Ross 730-1. BD +17 degree4946 showed some evidence of irregular variations in position and magnitude. The residuals for Ross 730-1 were used in a preliminary study to test for an appropriate weighting system; a weak weighting system was indicated. (auth)

Outdoor stocking density in free-range laying hens: radio-frequency identification of impacts on range use.

Science.gov (United States)

Campbell, D L M; Hinch, G N; Dyall, T R; Warin, L; Little, B A; Lee, C

2017-01-01

The number and size of free-range laying hen (Gallus gallus domesticus) production systems are increasing within Australia in response to consumer demand for perceived improvement in hen welfare. However, variation in outdoor stocking density has generated consumer dissatisfaction leading to the development of a national information standard on free-range egg labelling by the Australian Consumer Affairs Ministers. The current Australian Model Code of Practice for Domestic Poultry states a guideline of 1500 hens/ha, but no maximum density is set. Radio-frequency identification (RFID) tracking technology was used to measure daily range usage by individual ISA Brown hens housed in six small flocks (150 hens/flock - 50% of hens tagged), each with access to one of three outdoor stocking density treatments (two replicates per treatment: 2000, 10 000, 20 000 hens/ha), from 22 to 26, 27 to 31 and 32 to 36 weeks of age. There was some variation in range usage across the sampling periods and by weeks 32 to 36 individual hens from the lowest stocking density on average used the range for longer each day (Prange with 2% of tagged hens in each treatment never venturing outdoors and a large proportion that accessed the range daily (2000 hens/ha: 80.5%; 10 000 hens/ha: 66.5%; 20 000 hens/ha: 71.4%). On average, 38% to 48% of hens were seen on the range simultaneously and used all available areas of all ranges. These results of experimental-sized flocks have implications for determining optimal outdoor stocking densities for commercial free-range laying hens but further research would be needed to determine the effects of increased range usage on hen welfare.

Exact sampling of graphs with prescribed degree correlations

Science.gov (United States)

Bassler, Kevin E.; Del Genio, Charo I.; Erdős, Péter L.; Miklós, István; Toroczkai, Zoltán

2015-08-01

Many real-world networks exhibit correlations between the node degrees. For instance, in social networks nodes tend to connect to nodes of similar degree and conversely, in biological and technological networks, high-degree nodes tend to be linked with low-degree nodes. Degree correlations also affect the dynamics of processes supported by a network structure, such as the spread of opinions or epidemics. The proper modelling of these systems, i.e., without uncontrolled biases, requires the sampling of networks with a specified set of constraints. We present a solution to the sampling problem when the constraints imposed are the degree correlations. In particular, we develop an exact method to construct and sample graphs with a specified joint-degree matrix, which is a matrix providing the number of edges between all the sets of nodes of a given degree, for all degrees, thus completely specifying all pairwise degree correlations, and additionally, the degree sequence itself. Our algorithm always produces independent samples without backtracking. The complexity of the graph construction algorithm is {O}({NM}) where N is the number of nodes and M is the number of edges.

Mechanical aspects of degree of cement bonding and implant wedge effect.

Science.gov (United States)

Yoon, Yong-San; Oxland, Thomas R; Hodgson, Antony J; Duncan, Clive P; Masri, Bassam A; Choi, Donok

2008-11-01

The degree of bonding between the femoral stem and cement in total hip replacement remains controversial. Our objective was to determine the wedge effect by debonding and stem taper angle on the structural behavior of axisymmetric stem-cement-bone cylinder models. Stainless steel tapered plugs with a rough (i.e. bonded) or smooth (i.e. debonded) surface finish were used to emulate the femoral stem. Three different stem taper angles (5 degrees , 7.5 degrees , 10 degrees ) were used for the debonded constructs. Non-tapered and tapered (7.5 degrees ) aluminum cylindrical shells were used to emulate the diaphyseal and metaphyseal segments of the femur. The cement-aluminum cylinder interface was designed to have a shear strength that simulated bone-cement interfaces ( approximately 8MPa). The test involved applying axial compression at a rate of 0.02mm/s until failure. Six specimens were tested for each combination of the variables. Finite element analysis was used to enhance the understanding of the wedge effect. The debonded stems sustained about twice as much load as the bonded stem, regardless of taper angle. The metaphyseal model carried 35-50% greater loads than the diaphyseal models and the stem taper produced significant differences. Based on the finite element analysis, failure was most probably by shear at the cement-bone interface. Our results in this simplified model suggest that smooth (i.e. debonded) stems have greater failure loads and will incur less slippage or shear failure at the cement-bone interface than rough (i.e. bonded) stems.

Long-range hybrid ridge and trench plasmonic waveguides

Energy Technology Data Exchange (ETDEWEB)

Bian, Yusheng [State Key Laboratory for Mesoscopic Physics, Department of Physics, Peking University, Beijing 100871 (China); Gong, Qihuang, E-mail: qhgong@pku.edu.cn [State Key Laboratory for Mesoscopic Physics, Department of Physics, Peking University, Beijing 100871 (China); Collaborative Innovation Center of Quantum Matter, Beijing 100871 (China)

2014-06-23

We report a class of long-range hybrid plasmon polariton waveguides capable of simultaneously achieving low propagation loss and tight field localization at telecommunication wavelength. The symmetric (quasi-symmetric) hybrid configurations featuring high-refractive-index-contrast near the non-uniform metallic nanostructures enable significantly improved optical performance over conventional hybrid waveguides, exhibiting considerably longer propagation distances and dramatically enhanced figure of merits for similar degrees of confinement. Compared to their traditional long-range plasmonic counterparts, the proposed hybrid waveguides put much less stringent requirements on index-matching conditions, demonstrating nice performance under a wide range of physical dimensions and robust characteristics against certain fabrication imperfections. Studies concerning crosstalk between adjacent identical waveguides further reveal their potential for photonic integrations. In addition, alternative configurations with comparable guiding properties to the structures in our case studies are also proposed, which can potentially serve as attractive prototypes for numerous high-performance nanophotonic components.

Influence of degree correlations on network structure and stability in protein-protein interaction networks

Directory of Open Access Journals (Sweden)

Zimmer Ralf

2007-08-01

Full Text Available Abstract Background The existence of negative correlations between degrees of interacting proteins is being discussed since such negative degree correlations were found for the large-scale yeast protein-protein interaction (PPI network of Ito et al. More recent studies observed no such negative correlations for high-confidence interaction sets. In this article, we analyzed a range of experimentally derived interaction networks to understand the role and prevalence of degree correlations in PPI networks. We investigated how degree correlations influence the structure of networks and their tolerance against perturbations such as the targeted deletion of hubs. Results For each PPI network, we simulated uncorrelated, positively and negatively correlated reference networks. Here, a simple model was developed which can create different types of degree correlations in a network without changing the degree distribution. Differences in static properties associated with degree correlations were compared by analyzing the network characteristics of the original PPI and reference networks. Dynamics were compared by simulating the effect of a selective deletion of hubs in all networks. Conclusion Considerable differences between the network types were found for the number of components in the original networks. Negatively correlated networks are fragmented into significantly less components than observed for positively correlated networks. On the other hand, the selective deletion of hubs showed an increased structural tolerance to these deletions for the positively correlated networks. This results in a lower rate of interaction loss in these networks compared to the negatively correlated networks and a decreased disintegration rate. Interestingly, real PPI networks are most similar to the randomly correlated references with respect to all properties analyzed. Thus, although structural properties of networks can be modified considerably by degree

ALICE Zero Degree Calorimeter

CERN Multimedia

De Marco, N

2013-01-01

Two identical sets of calorimeters are located on both sides with respect to the beam Interaction Point (IP), 112.5 m away from it. Each set of detectors consists of a neutron (ZN) and a proton (ZP) Zero Degree Calorimeter (ZDC), positioned on remotely controlled platforms. The ZN is placed at zero degree with respect to the LHC beam axis, between the two beam pipes, while the ZP is positioned externally to the outgoing beam pipe. The spectator protons are separated from the ion beams by means of the dipole magnet D1.

Shape memory characteristics and mechanical properties of powder metallurgy processed Ti50Ni40Cu10 alloy.

Science.gov (United States)

Kim, Yeon-Wook

2014-10-01

Ti-Ni-Cu alloy powders were prepared by gas atomization and porous bulk specimens were fabricated by spark plasma sintering (SPS). The microstructure of as-solidified powders exhibited a cellular structure and they contained a high density of nano-sized porosities which were located in the intercellular regions. XRD analysis showed that one-step martensitic transformation of B2-B19 occurred in all alloy powders and SPS specimens. When the martensitic transformation start temperature (M(s)) and austenite transformation finish temperature (A(f)) were determined in order to analyze the dependence of powder size on transformation temperatures, the M(s) increased slightly from -17.5 degrees C to - 14.6 degrees C as increasing the powder size ranging from between 25 and 50 μm to ranging between 100 and 150 μm. However, the M(s) and A(f) of the as-atomized powders is much smaller than those of SPS specimens and the M(s) of porous specimen was about 10.9 degrees C. Loading-unloading compressive tests were carried out to investigate the mechanical properties of porous Ti-Ni-Cu specimen. The specimen was compressed to the strain of 6% at a temperature higher than A,. After unloading, the residual strain was 2.1%. After the compressed specimen was heated to 60 degrees C and held for 30 minutes and then cooled to room temperature, the changes in the length of the specimens were measured. Then it was found that the recovered strain ascribed to shape memory effect was 1.5%.

Effects of inhibiting CoQ10 biosynthesis with 4-nitrobenzoate in human fibroblasts.

Directory of Open Access Journals (Sweden)

Catarina M Quinzii

Full Text Available Coenzyme Q(10 (CoQ(10 is a potent lipophilic antioxidant in cell membranes and a carrier of electrons in the mitochondrial respiratory chain. We previously characterized the effects of varying severities of CoQ(10 deficiency on ROS production and mitochondrial bioenergetics in cells harboring genetic defects of CoQ(10 biosynthesis. We observed a unimodal distribution of ROS production with CoQ(10 deficiency: cells with <20% of CoQ(10 and 50-70% of CoQ(10 did not generate excess ROS while cells with 30-45% of CoQ(10 showed increased ROS production and lipid peroxidation. Because our previous studies were limited to a small number of mutant cell lines with heterogeneous molecular defects, here, we treated 5 control and 2 mildly CoQ(10 deficient fibroblasts with varying doses of 4-nitrobenzoate (4-NB, an analog of 4-hydroxybenzoate (4-HB and inhibitor of 4-para-hydroxybenzoate:polyprenyl transferase (COQ2 to induce a range of CoQ(10 deficiencies. Our results support the concept that the degree of CoQ(10 deficiency in cells dictates the extent of ATP synthesis defects and ROS production and that 40-50% residual CoQ(10 produces maximal oxidative stress and cell death.

Research Degrees as Professional Education?

Science.gov (United States)

Barnacle, Robyn; Dall'Alba, Gloria

2011-01-01

There is an increasing trend within higher education and, more specifically, in higher degrees by research, to treat a professional skills set as a desirable graduate outcome. The increasing value that is being placed on a professional skills set in large part reflects growing interest around the world in the role of research degrees in labour…

Career Progression of the Pharmacy/MBA Professional: Characterization and Perceptions of the Combined Degree.

Science.gov (United States)

Daly, Christopher J; Tierney, Sarah-Elizabeth L; O'Brien, Erin; Fiebelkorn, Karl D; Jacobs, David M

2017-05-01

Objectives. To characterize pharmacy/MBA professionals during their entry-level and current positions and to describe their attitudes and perceptions toward their combined degree. Methods. A cross-sectional survey of University at Buffalo (UB) alumni who obtained both pharmacy and MBA degrees was used. An electronic survey was developed through collaboration with the UB School of Management and administered in winter 2015. Results. A total of 68/115 (59% response rate) pharmacy/MBA professionals responded to the survey. Post-graduate training was completed by 24% of respondents, and most commonly it was a residency program. After adjusting for inflation to 2014 dollars, the median entry-level salary for pharmacy/MBA professionals was $140,123 (mean = $144,327) and this increased to $179,947 (mean = $205,623) for those in their current position. Practice settings for entry-level professionals included pharmaceutical industry (25%) and chain pharmacies (18%). Most respondents believed that a combined degree helped in career advancement (85%) and made them more competitive in the job market (90%). Conclusion. Pharmacy/MBA professionals are well-compensated, work in a wide-range of professional settings, and have a high-level of satisfaction with their combined degree.

Seasonal changes in daily metabolic patterns of tegu lizards (Tupinambis merianae) placed in the cold (17 degrees C) and dark.

Science.gov (United States)

Milsom, William K; Andrade, Denis V; Brito, Simone P; Toledo, Luis F; Wang, Tobias; Abe, Augusto S

2008-01-01

Abstract Oxygen consumption rate was measured continuously in young tegu lizards Tupinambis merianae exposed to 4 d at 25 degrees C followed by 7-10 d at 17 degrees C in constant dark at five different times of the year. Under these conditions, circadian rhythms in the rate of oxygen consumption persisted for anywhere from 1 d to the entire 2 wk in different individuals in all seasons except the winter. We also saw a progressive decline in standard oxygen consumption rate (at highly variable rates in different individuals) to a very low rate that was seasonally independent (ranging from 19.1 +/- 6.2 to 27.7 +/- 0.2 mL kg(-1) h(-1) across seasons). Although this degree of reduction appeared to take longer to invoke when starting from higher metabolic rates, tegu lizards reduced their metabolism to the low rates seen in winter dormancy at all times of the year when given sufficient time in the cold and dark. In the spring and summer, tegus reduced their standard metabolic rate (SMR) by 80%-90% over the experimental run, but only roughly 20%-30% of the total fall was due to the reduction in temperature; 70%-80% of the total fall occurred at constant temperature. By autumn, when the starting SMR on the first night at 25 degrees C was already reduced by 59%-81% (early and late autumn, respectively) from peak summer values, virtually all of the fall (63%-83%) in metabolism was due to the reduction in temperature. This suggests that the temperature-independent reduction of metabolism was already in place by autumn before the tegus had entered winter dormancy.

Measurement of the oxidation of spent fuel between 140/degree/ and 225/degree/C by thermogravimetric analysis

International Nuclear Information System (INIS)

Woodley, R.E.; Einziger, R.E.; Buchanan, H.C.

1988-09-01

A series of PWR spent fuel samples from Turkey Point Unit 3 have been oxidized at temperatures between 140/degree/ and 225/degree/C in air atmospheres with dew points between 14.5/degree/ and /minus/70/degree/C, using a thermogravimetric analysis system (TGA). Tests lasted between 400 and 2100 hours. At the conclusion of a test, the atmosphere was sampled to determine the release of fission gas during testing, and the fuel samples were analyzed for microstructural changes. It appears that the mechanism for oxidation of spent fuel to U/sub 3/O/sub 7/ takes place in two steps that occur somewhat simultaneously. Oxygen migrates along the grain boundaries, which are oxidized and enlarged. The grains oxidize by the inward progression of a layer of U/sub 4/O/sub 9/ saturated with oxygen. A simplified model of the mechanism, which considers oxygen diffusion through the product layer as the rate-controlling step, yields an activation energy of 27 /plus minus/ 4 kcal/mol. Moisture, between dew points of /minus/70/degree/ to +14.5/degree/C, i.e., water vapor partial pressures varying over four orders of magnitude, had no significant effect on the oxidation rate. 34 refs., 12 figs., 6 tabs

Self-locking degree-4 vertex origami structures.

Science.gov (United States)

Fang, Hongbin; Li, Suyi; Wang, K W

2016-11-01

A generic degree-4 vertex (4-vertex) origami possesses one continuous degree-of-freedom for rigid folding, and this folding process can be stopped when two of its facets bind together. Such facet-binding will induce self-locking so that the overall structure stays at a pre-specified configuration without additional locking elements or actuators. Self-locking offers many promising properties, such as programmable deformation ranges and piecewise stiffness jumps, that could significantly advance many adaptive structural systems. However, despite its excellent potential, the origami self-locking features have not been well studied, understood, and used. To advance the state of the art, this research conducts a comprehensive investigation on the principles of achieving and harnessing self-locking in 4-vertex origami structures. Especially, for the first time, this study expands the 4-vertex structure construction from single-component to dual-component designs and investigates their self-locking behaviours. By exploiting various tessellation designs, this research discovers that the dual-component designs offer the origami structures with extraordinary attributes that the single-component structures do not have, which include the existence of flat-folded locking planes, programmable locking points and deformability. Finally, proof-of-concept experiments investigate how self-locking can effectively induce piecewise stiffness jumps. The results of this research provide new scientific knowledge and a systematic framework for the design, analysis and utilization of self-locking origami structures for many potential engineering applications.

A versatile ultra high vacuum sample stage with six degrees of freedom

Energy Technology Data Exchange (ETDEWEB)

Ellis, A. W.; Tromp, R. M. [IBM T.J. Watson Research Center, 1101 Kitchawan Road, P.O. Box 218, Yorktown Heights, New York 10598 (United States)

2013-07-15

We describe the design and practical realization of a versatile sample stage with six degrees of freedom. The stage was designed for use in a Low Energy Electron Microscope, but its basic design features will be useful for numerous other applications. The degrees of freedom are X, Y, and Z, two tilts, and azimuth. All motions are actuated in an ultrahigh vacuum base pressure environment by piezoelectric transducers with integrated position sensors. The sample can be load-locked. During observation, the sample is held at a potential of −15 kV, at temperatures between room temperature and 1500 °C, and in background gas pressures up to 1 × 10{sup −4} Torr.

Fracturing process and effect of fracturing degree on wave velocity of a crystalline rock

Directory of Open Access Journals (Sweden)

Charalampos Saroglou

2017-10-01

Full Text Available The present paper investigates the effect of fracturing degree on P- and S-wave velocities in rock. The deformation of intact brittle rocks under loading conditions is characterized by a microcracking procedure, which occurs due to flaws in their microscopic structure and propagates through the intact rock, leading to shear fracture. This fracturing process is of fundamental significance as it affects the mechanical properties of the rock and hence the wave velocities. In order to determine the fracture mechanism and the effect of fracturing degree, samples were loaded at certain percentages of peak strength and ultrasonic wave velocity was recorded after every test. The fracturing degree was recorded on the outer surface of the sample and quantified by the use of the indices P10 (traces of joints/m, P20 (traces of joints/m2 and P21 (length of fractures/m2. It was concluded that the wave velocity decreases exponentially with increasing fracturing degree. Additionally, the fracturing degree is described adequately with the proposed indices. Finally, other parameters concerning the fracture characteristics, rock type and scale influence were found to contribute to the velocity decay and need to be investigated further.

A Gadamerian Phenomenological Study Examining the Meaning of Having a Bachelor's Degree Expressed by Associate Degree Nurses (ADN) Who Educationally Transitioned to a Baccalaureate Degree in Nursing (BSN)

Science.gov (United States)

Sauld, Jill Pierpont

2017-01-01

Since the inception of associate degree nursing programs, professional nursing conversations and debate have grappled with reckoning differences between the associate degree in nursing (ADN) and the bachelor's degree in nursing (BSN). Research reporting better patient outcomes with more baccalaureate prepared nurses has been a driving force for…

Measurement of (n,/alpha/) cross sections of chromium, iron, and nickel in the 5- to 10-MeV neutron energy range

International Nuclear Information System (INIS)

Paulsen, A.; Liskien, H.; Arnotte, F.; Widera, R.

1981-01-01

A measuring program has been carried out at the Van de Graaff accelerator facility of the Central Bureau for Nuclear Measurements for the determination of (n,/alpha/) cross sections on the main constituents of fast reactor structural materials, namely the elements chromium, iron, and nickel. Results obtained in the energy range from 5 to 10 Mev are presented in terms of laboratory angle-differential cross sections, relative Legendre polynomial coefficients of angular distributions, angle-integrated cross sections, and average alpha energies. 13 refs

Unusual evolutionary conservation and further species-specific adaptations of a large family of nonclassical MHC class Ib genes across different degrees of genome ploidy in the amphibian subfamily Xenopodinae.

Science.gov (United States)

Edholm, Eva-Stina; Goyos, Ana; Taran, Joseph; De Jesús Andino, Francisco; Ohta, Yuko; Robert, Jacques

2014-06-01

Nonclassical MHC class Ib (class Ib) genes are a family of highly diverse and rapidly evolving genes wherein gene numbers, organization, and expression markedly differ even among closely related species rendering class Ib phylogeny difficult to establish. Whereas among mammals there are few unambiguous class Ib gene orthologs, different amphibian species belonging to the anuran subfamily Xenopodinae exhibit an unusually high degree of conservation among multiple class Ib gene lineages. Comparative genomic analysis of class Ib gene loci of two divergent (~65 million years) Xenopodinae subfamily members Xenopus laevis (allotetraploid) and Xenopus tropicalis (diploid) shows that both species possess a large cluster of class Ib genes denoted as Xenopus/Silurana nonclassical (XNC/SNC). Our study reveals two distinct phylogenetic patterns among these genes: some gene lineages display a high degree of flexibility, as demonstrated by species-specific expansion and contractions, whereas other class Ib gene lineages have been maintained as monogenic subfamilies with very few changes in their nucleotide sequence across divergent species. In this second category, we further investigated the XNC/SNC10 gene lineage that in X. laevis is required for the development of a distinct semi-invariant T cell population. We report compelling evidence of the remarkable high degree of conservation of this gene lineage that is present in all 12 species of the Xenopodinae examined, including species with different degrees of ploidy ranging from 2, 4, 8 to 12 N. This suggests that the critical role of XNC10 during early T cell development is conserved in amphibians.

Investigation of six-degree-of-freedom image registration between planning and cone beam computed tomography in esophageal cancer

International Nuclear Information System (INIS)

Li Jiancheng; Pan Jianji; Hu Cairong; Wang Xiaoliang; Cheng Wenfang; Zhao Yunhui

2010-01-01

Objective: To explore six-degree-of-freedom (6-DF) registration methods between planning and cone beam computed tomography (CBCT) during image-guided radiation therapy (IGRT) in esophageal cancer. Methods: Thirty pairs of CBCT images acquired before radiation and the corresponding planning computed tomography (CT) images of esophageal cancer were selected for further investigation. Registration markers for 6-DF image registration were determined and contoured in those images. The results of registration as well as time cost were compared among different registration methods of bone match, gray value match, manual match, and bone plus manual match. Results: Contouring bone and spinal canal posterior to the target volume of esophageal carcinoma as registration marker could make 6-DF registration quick and precise. Compared with manual match, set-up errors of v rotation in bone plus manual match (-0.55 degree vs.-0.88 degree, t=2.55, P=0.020), of x-axis and v rotation in bone match (0.12 mm vs.-2.33 mm, t=5.75, P=0.000; -0.35 degree vs. -0.88 degree, t=3.00, P=0.007), and of x-axis and w rotation in gray value match (7.20 mm vs. -2.33 mm, t=3.10, P=0.006; -0.10 degree vs. -0.59 degree, t=2.81, P =0.011) were significantly different. Compared with manual match, the coincidence rate of bone plus manual match was the highest (85.55%), followed by bone match and gray value match (74.45% and 74.45%). The time cost of each registration method from longest to shortest was: 6.00 -10.00 minutes for manual match, 1.00 - 5.00 minutes for bone plus manual match, 0.75 - 1.50 minutes for gray value match, and 0.50 - 0.83 minutes for bone match. Conclusions: Registration marker is useful for image registration of CBCT and planning CT in patients with esophageal cancer. Bone plus manual match may be the best registration method considering both registration time and accuracy. (authors)

Nuclear engineering enrollments and degrees, 1981

International Nuclear Information System (INIS)

Little, J.R.; Shirley, D.L.

1982-05-01

This report presents data on the number of students enrolled and the degrees awarded in academic year 1980-81 from 73 US institutions offering degree programs in nuclear engineering or nuclear options within other engineering fields. Presented here are historical data for the last decade, which provide information such as trends by degree level, foreign national student participation, female and minority student participation, and placement of graduates. Also included is a listing of the universities by type of program and number of students

Combined 30-degree bevel up and down technique against 0-degree phaco tip for phacoemulsification surgery of hard cataracts

Directory of Open Access Journals (Sweden)

Joshi RS

2017-06-01

Full Text Available Rajesh Subhash Joshi, Sonal Jayant Muley Department of Ophthalmology, Vasantrao Naik Government Medical College, Yavatmal, Maharashtra, India Purpose: To evaluate the effective phaco time (EPT, cumulative dissipated energy (CDE and nucleus emulsification time (NET as phaco parameters with 0- and 30-degree phaco tip. Patients and methods: This prospective, interventional and observational case series included 294 patients scheduled for cataract removal by phacoemulsification technique. Patients with nuclear cataracts of grade 4 and 5 nuclear opalescence of Lens Opacities Classification System III were included in the study. Patients were consecutively allocated to phaco chop technique with 0-degree (0-degree group, n=147 and combined bevel up and down position using 30-degree phaco tip (combined bevel up/down group, n=147. The 0-degree group had phacoemulsification with 0-degree phaco tip, while the 30-degree group had chopping of the nucleus with bevel down phaco tip and emulsification of nuclear fragments was accomplished with bevel up tip. EPT, CDE, NET and intraoperative complications were noted and compared between the groups using analysis of variance. Results: Average EPT, CDE and NET were lower in the 30-degree group than in the 0-degree group. However, no statistically significant difference was found in EPT (P=0.0733, CDE (P=0.0663 and NET (P=0.0633 between the two groups. No serious intraoperative complications were noted. The anterior chamber was maintained throughout the procedure in both groups. No patients had wound burn and miosis during the procedure. None of the patients developed bullous keratopathy, uveitis and cystoid macular edema during the follow-up period. Conclusion: Combined bevel up and down 30-degree tip can yield effective hard nucleus phacoemulsification. Bevel down tip of 30-degree helps in effective chopping and bevel up tip assists in emulsification of the nuclear fragments. Although combined bevel up and down 30

Variation in meroplankton along 78 degrees E Meridian

Digital Repository Service at National Institute of Oceanography (India)

Balachandran, T.; Peter, K.J.

Variations along the meridian 78 degrees E between 8 degrees N and 25 degrees S, based on 43 zooplankton samples were studied. Fish larvae exhibited fluctuations in abundance (26 to 57 specimens/IOSN haul) in the three zones studied (8 degrees N-5...

FINASOL OSR 51 biodegradation by the biological activators BIOLEN IG 30 and BIOLEN IC 10

Energy Technology Data Exchange (ETDEWEB)

Bergueiro, J.R.; Dominguez, F.; Guzman, E. [Balearic Island Univ., Palma de Mallorca, Islas Baleares (Spain); Morales, N. [Alfonso X El Sabio Univ., Madrid (Spain); Perez-Navarro, A. [LAESA, Zaragoza (Spain)

1998-09-01

Results of experimental work to study the biodegradation of the total ionic and anionic dispersants in FINASOL OSR 51 for the biological activators BIOLEN IG 30 and IC 10 were described. BIOLEN IG 30 and IC 10 are mixtures of bacteria chosen for their ability to degrade a wide range of chemical compounds. Biodegradation experiments were conducted in a non-isothermal container at room temperature (between 16.9 and 30.8 degrees C) to simulate the biodegradation process in a natural environment where the temperature cannot be controlled. Additional experiments were conducted at a controlled temperature value of 20 degrees C. Eight different reactor tests were performed with FINASOL OSR 51 dispersed in distilled and sterilized water. The influence of the accelerator INIPOL EAP 22 on the degradation process was also examined. Results from the degradation of the different compounds were presented and their kinetic coefficients were calculated. Biological Oxygen Demand at five days and at the end of the degradation was also determined. This made it possible to calculate the biodegradation constant and the biochemical stabilization constant. 11 refs., 13 tabs., 8 figs.

Heat-to-heat variability of irradiation creep and swelling of HT9 irradiated to high neutron fluence at 400-600{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Toloczko, M.B.; Garner, F.A. [Pacific Northwest National Lab., Richland, WA (United States)

1996-10-01

Irradiation creep data on ferritic/martensitic steels are difficult and expensive to obtain, and are not available for fusion-relevant neutron spectra and displacement rates. Therefore, an extensive creep data rescue and analysis effort is in progress to characterize irradiation creep of ferritic/martensitic alloys in other reactors and to develop a methodology for applying it to fusion applications. In the current study, four tube sets constructed from three nominally similar heats of HT9 subjected to one of two heat treatments were constructed as helium-pressurized creep tubes and irradiated in FFTF-MOTA at four temperatures between 400 and 600{degrees}C. Each of the four heats exhibited a different stress-free swelling behavior at 400{degrees}C, with the creep rate following the swelling according to the familiar B{sub o} + DS creep law. No stress-free swelling was observed at the other three irradiation temperatures. Using a stress exponent of n = 1.0 as the defining criterion, {open_quotes}classic{close_quotes} irradiation creep was found at all temperatures, but, only over limited stress ranges that decreased with increasing temperature. The creep coefficient B{sub o} is a little lower ({approx}50%) than that observed for austenitic steel, but the swelling-creep coupling coefficient D is comparable to that of austenitic steels. Primary transient creep behavior was also observed at all temperatures except 400{degrees}C, and thermal creep behavior was found to dominate the deformation at high stress levels at 550 and 600{degrees}C.

The effectiveness of the Pilates method: reducing the degree of non-structural scoliosis, and improving flexibility and pain in female college students.

Science.gov (United States)

Alves de Araújo, Maria Erivânia; Bezerra da Silva, Elirez; Bragade Mello, Danielli; Cader, Samária Ali; Shiguemi Inoue Salgado, Afonso; Dantas, Estélio Henrique Martin

2012-04-01

To evaluate the effectiveness of Pilates with regard to the degree of scoliosis, flexibility and pain. The study included 31 female students divided into two groups: a control group (CG = 11), which had no therapeutic intervention, and an experimental group (EG = 20), which underwent Pilates-based therapy. We used radiological goniometry measurements to assess the degree of scoliosis, standard goniometry measurements to determine the degree of flexibility and the scale of perceived pain using the Borg CR 10 to quantify the level of pain. The independent t test of the Cobb angle (t = - 2.317, p = 0.028), range of motion of trunk flexion (t = 3.088, p = 0.004) and pain (t = -2.478, p = 0.019) showed significant differences between the groups, with best values in the Pilates group. The dependent t test detected a significant decrease in the Cobb angle (Δ% = 38%, t = 6.115, p = 0.0001), a significant increase in trunk flexion (Δ% = 80%, t = -7.977, p = 0.0001) and a significant reduction in pain (Δ% = 60%, t = 7.102, p = 0.0001) in the EG. No significant difference in Cobb angle (t = 0.430, p = 0.676), trunk flexion, (t = 0.938p = 0.371) or pain (t = 0.896, p = 0.391) was found for the CG. The Pilates group was better than control group. The Pilates method showed a reduction in the degree of non-structural scoliosis, increased flexibility and decreased pain. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Range of Initial 10Be/9Be Ratios in the Early Solar System: A Re-Assessment Based on Analyses of New CAIs and Melilite Composition Glass Standards

Science.gov (United States)

Dunham, E.; Wadhwa, M.; Liu, M.-C.

2017-07-01

We report a more accurate range of initial 10Be/9Be in CAIs including FUN CAI CMS-1 from Allende (CV3) and a new CAI from NWA 5508 (CV3) using melilite composition glass standards; we suggest 10Be is largely produced by irradiation in the nebula.

Photoperiod and growing degree days effect on dry matter partitioning in Jerusalem artichoke

Science.gov (United States)

The effect of photoperiod and growing degree days (GDD) on dry matter and dry partitioning in Jerusalem artichoke was investigated during 2008-09 and 2009-10. Three Jerusalem artichoke genotypes (CN-52867, JA-89 and HEL-65) were planted in 15 day-intervals between with thirteen different dates (Sep...

Does Degree of Work Task Completion Influence Retrieval Performance?

DEFF Research Database (Denmark)

Ingwersen, Peter; Bogers, Toine; Lykke, Marianne

2010-01-01

their perception of task completion. Also, with the exception of full text records and across all document types, both measured at rank 10, no statistically significant correlation is observed with respect to retrieval performance influenced by degrees of perceived work task completion or individual types......In this contribution we investigate the potential influence between assessors’ perceived completion of their work task at hand and their actual assessment of usefulness of the retrieved information. The results indicate that the number of useful documents found by assessors does not influence...

Reactions of the HO₂ radical with OH, H, Fe²⁺ and Cu²⁺ at elevated temperatures

DEFF Research Database (Denmark)

Lundström, T.; Christensen, H.; Sehested, K.

2004-01-01

was studied in the temperature range 20-296degreesC (k = 7.0 x 10(9), E-a = 7.4) and the reaction with H in the temperature range 5-149degreesC (k = 8.5 x 10(9), E-a = 17.5). The reaction with Fe2+ was studied in the temperature range 16-118degreesC (k = 7.9 x 10(5), E-a = 36.8) and the reaction with Cu2......+ in the temperature range 17-211degreesC (k = 1.1 x 10(8), E-a = 14.9). (C) 2003 Elsevier Ltd. All rights reserved....

A novel topology control approach to maintain the node degree in dynamic wireless sensor networks.

Science.gov (United States)

Huang, Yuanjiang; Martínez, José-Fernán; Díaz, Vicente Hernández; Sendra, Juana

2014-03-07

Topology control is an important technique to improve the connectivity and the reliability of Wireless Sensor Networks (WSNs) by means of adjusting the communication range of wireless sensor nodes. In this paper, a novel Fuzzy-logic Topology Control (FTC) is proposed to achieve any desired average node degree by adaptively changing communication range, thus improving the network connectivity, which is the main target of FTC. FTC is a fully localized control algorithm, and does not rely on location information of neighbors. Instead of designing membership functions and if-then rules for fuzzy-logic controller, FTC is constructed from the training data set to facilitate the design process. FTC is proved to be accurate, stable and has short settling time. In order to compare it with other representative localized algorithms (NONE, FLSS, k-Neighbor and LTRT), FTC is evaluated through extensive simulations. The simulation results show that: firstly, similar to k-Neighbor algorithm, FTC is the best to achieve the desired average node degree as node density varies; secondly, FTC is comparable to FLSS and k-Neighbor in terms of energy-efficiency, but is better than LTRT and NONE; thirdly, FTC has the lowest average maximum communication range than other algorithms, which indicates that the most energy-consuming node in the network consumes the lowest power.

Orthogonal design on range hood with air curtain and its effects on kitchen environment.

Science.gov (United States)

Liu, Xiaomin; Wang, Xing; Xi, Guang

2014-01-01

Conventional range hoods cannot effectively prevent the oil fumes containing cooking-induced harmful material from escaping into the kitchen Air curtains and guide plates have been used in range hoods to reduce the escape of airborne emissions and heat, thereby improving the kitchen environment and the cook's degree of comfort. In this article, numerical simulations are used to study the effects of the jet velocity of an air curtain, the jet angle of the air curtain, the width of the jet slot, the area of the guide plate, and the exhaust rate of the range hood on the perceived temperature, the perceived concentration of oil fumes, the release temperature of oil fumes, and the concentration of escaped oil fumes in a kitchen. The orthogonal experiment results show that the exhaust rate of the range hood is the main factor influencing the fumes concentration and the temperature distribution in the kitchen. For the range hood examined in the present study, the optimum values of the exhaust rate, the jet velocity of the air curtain, the jet angle of the air curtain, the width of the jet slot, and the area of the guide plate are 10.5 m(3)/min, 1.5 m/s, -5°, 4 mm, and 0.22 m(2), respectively, based on the results of the parametric study. In addition, the velocity field, temperature field, and oil fumes concentration field in the kitchen using the proposed range hood with the air curtain and guide plate are analyzed for those parameters. The study's results provide significant information needed for improving the kitchen environment.

Comparison of reconstructed rapid prototyping models produced by 3-dimensional printing and conventional stone models with different degrees of crowding.

Science.gov (United States)

Wan Hassan, Wan Nurazreena; Yusoff, Yusnilawati; Mardi, Noor Azizi

2017-01-01

Rapid prototyping models can be reconstructed from stereolithographic digital study model data to produce hard-copy casts. In this study, we aimed to compare agreement and accuracy of measurements made with rapid prototyping and stone models for different degrees of crowding. The Z Printer 450 (3D Systems, Rock Hill, SC) reprinted 10 sets of models for each category of crowding (mild, moderate, and severe) scanned using a structured-light scanner (Maestro 3D, AGE Solutions, Pisa, Italy). Stone and RP models were measured using digital calipers for tooth sizes in the mesiodistal, buccolingual, and crown height planes and for arch dimension measurements. Bland-Altman and paired t test analyses were used to assess agreement and accuracy. Clinical significance was set at ±0.50 mm. Bland-Altman analysis showed the mean bias of measurements between the models to be within ±0.15 mm (SD, ±0.40 mm), but the 95% limits of agreement exceeded the cutoff point of ±0.50 mm (lower range, -0.81 to -0.41 mm; upper range, 0.34 to 0.76 mm). Paired t tests showed statistically significant differences for all planes in all categories of crowding except for crown height in the moderate crowding group and arch dimensions in the mild and moderate crowding groups. The rapid prototyping models were not clinically comparable with conventional stone models regardless of the degree of crowding. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

How Adult Online Graduates Portray Their Degree

Science.gov (United States)

Hagan, Eric J.

2013-01-01

This qualitative case study investigated how adult graduates of online Bachelor's degree programs describe the online aspect of their degree. Online education is promoted as a method for adult students to access the benefits of a college degree. Therefore, it is important for prospective online students, higher education institutions and…

[Stretching the triceps surae muscle after 40 degrees C warming in patients with cerebral palsy].

Science.gov (United States)

Lespargot, A; Robert, M; Khouri, N

2000-11-01

Equinus in patients with cerebral palsy results from at least two factors: excessive contracture of the triceps surae and muscle retraction. Tendon surgery and progressive lengthening techniques using plaster walking boots can provide variable improvement in retraction. We compared the effect of this technique when applied with or without prior 40 degrees C warming in the same patients. We also assessed the efficacy of this treatment method in terms or degree of retraction, patient age, puberty maturity, and sex. This series included 70 muscles in 52 patients with cerebral palsy aged 2 years 11 months to 21 years (mean 8 years 3 months). Common features in these patients were: - equinus mainly explained by triceps retraction, - no history of prior surgery on the triceps tendon, - knee flexion less than 15 degrees in the upright position, - easily reduced lateral deformation of the foot, - absence of mediotarsal dislocation, - triceps stretching could be achieved without triggering unacceptably intense contracture. The retraction of the triceps surae was measured from the maximal passive dorsal flexion angle of the foot, before and after applying each stretching boot. The difference between these measurements gave the gain obtained with the plaster boot. Protocol R- (stretching with plaster boot) consisted in a series of slow stretchings for 10 minutes before making the boot which was worn 7 days. Recurrent retraction in these same patients warranted another treatment within a delay of 3 to 17 months (mean delay 8.7 months). The same treatment then followed protocol R+ where the stretching was preceded by immersion of the segment in a 40 degrees C water bath for 10 minutes. Mean gain obtained with protocol R+ (warming) was 6.8 degrees knee extended and 7.1 degrees knee flexed. These differences were highly significant in both cases (p knee extended and for 32 muscles, knee flexed. The gain was not related to age, sex or puberty maturity. It was not related to the

Career Paths for Physics Degree Recipients

Science.gov (United States)

Mulvey, Patrick

Physics degree holders have a diverse set of career opportunities open to them. So what are these opportunities? Where are they employed? How much do they earn? What skills will they need? Physics degrees make up a small proportion of the degrees conferred in the US but they play an important role in meeting workforce needs at many levels. This talk will give an overview of the employment outcomes of physics bachelors, masters and PhDs. It will discuss the diverse set fields they work in and the skills they use.

Fe-Catalyzed Synthesis of Porous Carbons Spheres with High Graphitization Degree for High-Performance Supercapacitors

Science.gov (United States)

Zhu, Jun; Shi, Hongwei; Zhuo, Xin; Hu, Yalin

2017-10-01

We have developed a facile and efficient Fe-catalyzed method for fabrication of porous carbons spheres with high graphitization degree (GNPCs) using glucose as carbon precursor at relatively low carbonization temperature. GNPCs not only have relatively large accessible ion surface area to accommodate greater capacity but also high graphitization degree to accelerate ion diffusion. As a typical application, we demonstrate that GNPCs exhibit excellent electrochemical performance for use in supercapacitors, with high specific capacity of 150.6 F g-1 at current density of 1 A g-1 and good rate capability and superior cycling stability over 10,000 cycles, confirming their potential application for energy storage. Moreover, it is believed that this method offers a new strategy for synthesis of porous carbons with high graphitization degree.

Degree of thoracic kyphosis and peak torque of trunk flexors and extensors among healthy women☆☆☆

Science.gov (United States)

Granito, Renata Neves; Aveiro, Mariana Chaves; Rennó, Ana Claudia Muniz; Oishi, Jorge; Driusso, Patricia

2014-01-01

Objective The aim of this study was to analyze the effects of aging on the degree of thoracic kyphosis and peak torque of the trunk flexor and extensor muscles among women without a densitometric diagnosis of osteoporosis. Methods Thirty women were selected to make up three groups: young women (n = 10; 24.60 ± 2.27 years of age); adults (n = 10; 43.50 ± 2.88); and elderly women (n = 10; 62.40 ± 2.67). Bone mineral density (BMD), degree of thoracic kyphosis and peak torque of the trunk flexors and extensors were evaluated. Differences between the groups were evaluated using the Kruskal–Wallis ANOVA and Mann–Whitney U tests. Pearson's correlation coefficient was used to assess correlations between the variables. The significance level was taken to be 5% (p ≤ 0.05). Results The elderly group presented a greater degree of thoracic kyphosis (p = 0.009) and lower peak torque of the trunk flexors and extensors than the young group. The adult group presented lower peak torque of the trunk than the young group. A negative correlation was observed between age and peak torque of the trunk flexors and extensors (p ≤ 0.001), and a positive correlation between age and the degree of thoracic kyphosis (r = 0.58; p ≤ 0.001). The elderly group presented higher values for the eccentric/concentric ratio of the peak torque for flexors (p = 0.03) and extensors (p = 0.02). Conclusion This study suggests that physiological aging may be associated with a greater degree of thoracic kyphosis and lower muscle strength of the trunk flexors and extensors. Moreover, the elderly women showed a relative capacity for preservation of eccentric strength. PMID:26229814

High Resolution and Large Dynamic Range Resonant Pressure Sensor Based on Q-Factor Measurement

Science.gov (United States)

Gutierrez, Roman C. (Inventor); Stell, Christopher B. (Inventor); Tang, Tony K. (Inventor); Vorperian, Vatche (Inventor); Wilcox, Jaroslava (Inventor); Shcheglov, Kirill (Inventor); Kaiser, William J. (Inventor)

2000-01-01

A pressure sensor has a high degree of accuracy over a wide range of pressures. Using a pressure sensor relying upon resonant oscillations to determine pressure, a driving circuit drives such a pressure sensor at resonance and tracks resonant frequency and amplitude shifts with changes in pressure. Pressure changes affect the Q-factor of the resonating portion of the pressure sensor. Such Q-factor changes are detected by the driving/sensing circuit which in turn tracks the changes in resonant frequency to maintain the pressure sensor at resonance. Changes in the Q-factor are reflected in changes of amplitude of the resonating pressure sensor. In response, upon sensing the changes in the amplitude, the driving circuit changes the force or strength of the electrostatic driving signal to maintain the resonator at constant amplitude. The amplitude of the driving signals become a direct measure of the changes in pressure as the operating characteristics of the resonator give rise to a linear response curve for the amplitude of the driving signal. Pressure change resolution is on the order of 10(exp -6) torr over a range spanning from 7,600 torr to 10(exp -6) torr. No temperature compensation for the pressure sensor of the present invention is foreseen. Power requirements for the pressure sensor are generally minimal due to the low-loss mechanical design of the resonating pressure sensor and the simple control electronics.

Phase stability, oxygen nonstoichiometry, and superconductivity properties of Bi2Sr2CaCu2O8+δ and Bi1.8Pb0.4Sr2Ca2Cu3O10+δ

International Nuclear Information System (INIS)

Mozhaev, A.P.; Chernyaev, S.V.; Badun, Y.V.

1995-01-01

Phase stability of Bi 2 Sr 2 CaCu 2 O 8+δ (2212) and Bi 1.8 Pb 0.4 Sr 2 Ca 2 Cu 3 O 10+δ (2223) was studied by means of thermogravimetry, dilatometry, high-temperature resistivity, and the powder X-ray methods in the temperature range 700-1000 degrees and at P O2 = 1-10 -4.3 atm. The existence of a high-temperature (peritectic melting) boundary of phase stability was found. The temperatures of low-temperature phase decomposition were determined in air and under an oxygen atmosphere. The change in oxygen content was determined for the 2212 phase in the temperature range 700-860 degrees C and at P O2 = 0.21-10 -3.7 atm by iodometric analysis of quenched samples. It was found that in the single-phase region, the change in oxygen nonstoichiometry had an insignificant influence on T c . It was also shown that the slow cooling of samples led to a significant decrease in T c and transport j c due to partial phase decomposition

Degree and connectivity of the Internet's scale-free topology

International Nuclear Information System (INIS)

Zhang Lian-Ming; Wu Xiang-Sheng; Deng Xiao-Heng; Yu Jian-Ping

2011-01-01

This paper theoretically and empirically studies the degree and connectivity of the Internet's scale-free topology at an autonomous system (AS) level. The basic features of scale-free networks influence the normalization constant of degree distribution p(k). It develops a new mathematic model for describing the power-law relationships of Internet topology. From this model we theoretically obtain formulas to calculate the average degree, the ratios of the k min -degree (minimum degree) nodes and the k max -degree (maximum degree) nodes, and the fraction of the degrees (or links) in the hands of the richer (top best-connected) nodes. It finds that the average degree is larger for a smaller power-law exponent λ and a larger minimum or maximum degree. The ratio of the k min -degree nodes is larger for larger λ and smaller k min or k max . The ratio of the k max -degree ones is larger for smaller λ and k max or larger k min . The richer nodes hold most of the total degrees of Internet AS-level topology. In addition, it is revealed that the increased rate of the average degree or the ratio of the k min -degree nodes has power-law decay with the increase of k min . The ratio of the k max -degree nodes has a power-law decay with the increase of k max , and the fraction of the degrees in the hands of the richer 27% nodes is about 73% (the ‘73/27 rule’). Finally, empirically calculations are made, based on the empirical data extracted from the Border Gateway Protocol, of the average degree, ratio and fraction using this method and other methods, and find that this method is rigorous and effective for Internet AS-level topology. (interdisciplinary physics and related areas of science and technology)

Long-range interaction between heterogeneously charged membranes.

Science.gov (United States)

Jho, Y S; Brewster, R; Safran, S A; Pincus, P A

2011-04-19

Despite their neutrality, surfaces or membranes with equal amounts of positive and negative charge can exhibit long-range electrostatic interactions if the surface charge is heterogeneous; this can happen when the surface charges form finite-size domain structures. These domains can be formed in lipid membranes where the balance of the different ranges of strong but short-ranged hydrophobic interactions and longer-ranged electrostatic repulsion result in a finite, stable domain size. If the domain size is large enough, oppositely charged domains in two opposing surfaces or membranes can be strongly correlated by the electrostatic interactions; these correlations give rise to an attractive interaction of the two membranes or surfaces over separations on the order of the domain size. We use numerical simulations to demonstrate the existence of strong attractions at separations of tens of nanometers. Large line tensions result in larger domains but also increase the charge density within the domain. This promotes correlations and, as a result, increases the intermembrane attraction. On the other hand, increasing the salt concentration increases both the domain size and degree of domain anticorrelation, but the interactions are ultimately reduced due to increased screening. The result is a decrease in the net attraction as salt concentration is increased. © 2011 American Chemical Society

Towards a census of supercompact massive galaxies in the Kilo Degree Survey

Science.gov (United States)

Tortora, C.; La Barbera, F.; Napolitano, N. R.; Roy, N.; Radovich, M.; Cavuoti, S.; Brescia, M.; Longo, G.; Getman, F.; Capaccioli, M.; Grado, A.; Kuijken, K. H.; de Jong, J. T. A.; McFarland, J. P.; Puddu, E.

2016-04-01

The abundance of compact, massive, early-type galaxies (ETGs) provides important constraints to galaxy formation scenarios. Thanks to the area covered, depth, excellent spatial resolution and seeing, the ESO Public optical Kilo Degree Survey (KiDS), carried out with the VLT Survey Telescope, offers a unique opportunity to conduct a complete census of the most compact galaxies in the Universe. This paper presents a first census of such systems from the first 156 deg2 of KiDS. Our analysis relies on g-, r- and I-band effective radii (Re), derived by fitting galaxy images with point spread function (PSF)-convolved Sérsic models, high-quality photometric redshifts, zphot, estimated from machine learning techniques, and stellar masses, M⋆, calculated from KiDS aperture photometry. After massiveness ({M_{⋆}}≳ 8 × 10^{10} M_{⊙}) and compactness ({R_e}≲ 1.5 kpc in g, r and I bands) criteria are applied, a visual inspection of the candidates plus near-infrared photometry from VIKING-DR1 are used to refine our sample. The final catalogue, to be spectroscopically confirmed, consists of 92 systems in the redshift range z ˜ 0.2-0.7. This sample, which we expect to increase by a factor of 10 over the total survey area, represents the first attempt to select massive supercompact ETGs (MSCGs) in KiDS. We investigate the impact of redshift systematics in the selection, finding that this seems to be a major source of contamination in our sample. A preliminary analysis shows that MSCGs exhibit negative internal colour gradients, consistent with a passive evolution of these systems. We find that the number density of MSCGs is only mildly consistent with predictions from simulations at z > 0.2, while no such system is found at z < 0.2.

A 70th Degree Lunar Gravity Model (GLGM-2) from Clementine and other tracking data

Science.gov (United States)

Lemonie, Frank G. R.; Smith, David E.; Zuber, Maria T.; Neumann, Gregory A.

1997-01-01

A spherical harmonic model of the lunar gravity field complete to degree and order 70 has been developed from S band Doppler tracking data from the Clementine mission, as well as historical tracking data from Lunar Orbiters 1-5 and the Apollo 15 and 16 subsatellites. The model combines 361,000 Doppler observations from Clementine with 347,000 historical observations. The historical data consist of mostly 60-s Doppler with a noise of 0.25 to several mm/s. The Clementine data consist of mostly 10-s Doppler data, with a data noise of 0.25 mm/s for the observations from the Deep Space Network, and 2.5 mm/s for the data from a naval tracking station at Pomonkey, Maryland. Observations provided Clementine, provide the strongest satellite constraint on the Moon's low-degree field. In contrast the historical data, collected by spacecraft that had lower periapsis altitudes, provide distributed regions of high-resolution coverage within +/- 29 deg of the nearside lunar equator. To obtain the solution for a high-degree field in the absence of a uniform distribution of observations, we applied an a priori power law constraint of the form 15 x 10(exp -5)/sq l which had the effect of limiting the gravitational power and noise at short wavelengths. Coefficients through degree and order 18 are not significantly affected by the constraint, and so the model permits geophysical analysis of effects of the major basins at degrees 10-12. The GLGM-2 model confirms major features of the lunar gravity field shown in previous gravitational field models but also reveals significantly more detail, particularly at intermediate wavelengths (10(exp 3) km). Free-air gravity anomaly maps derived from the new model show the nearside and farside highlands to be gravitationally smooth, reflecting a state of isostatic compensation. Mascon basins (including Imbrium, Serenitatis, Crisium, Smythii, and Humorum) are denoted by gravity highs first recognized from Lunar Orbiter tracking. All of the major

Competency-Based Business Degree. Issue Brief

Science.gov (United States)

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

In January 2015, thirteen Washington community colleges launched an online, competency-based business transfer degree--the first in the state's community and technical college system. This issue brief provides answers to commonly asked questions about the new competency-based degree.

Linking long-range weather forecasts and heat consumption as a determining factor when buying fuel chips for town heating plants

International Nuclear Information System (INIS)

Rolev, A.-M.

1991-12-01

The aim of this study is to test whether long-range weather forecasts from the meteorological services can be used as a determining factor when buying fuel chips. In the study the fuel consumption of heating plants and the factors determining the monthly consumption are mentioned. Degree-day statistics in Denmark for the last 30 years are explained as well as the difficulties in conjunction with the prediction of long-range weather conditions. This study compares degree days in 1989-1990 month by month with the actual and theoretic chip consumption in three different heating plants the same year. The theoretic chip consumption is calculated on the basis of degree days in a ''standard year'' and the annual chip consumption of the heating plant, among other things. Furthermore, on the basis of degree-day statistics the report makes it possible to estimate the monthly chip consumption of a heating plant in a ''standard year'', in an extremely cold year (maximum degree days), and in an extremely warm year (minimum degree days). However, not everything can be predicted, and it is not yet possible to predict reliable weather forecasts for more than 5 days ahead. The study concludes that long-range weather forecasts cannot be used as a determining factor when buying fuel chips for heating plants. When buying fuel chips one must still use statistics and degree days, supplimented by figures based on experience from actual chip consumption in the individual heating plant. These figures take into consideration the different types of heating plants, as well as heat supply, chip-supplier, storing facilities, other fuels, etc. (au)

Actuator with Multi Degrees of Freedom(Actuator)

OpenAIRE

矢野, 智昭; Tomoaki, YANO; 産業技術総合研究所

2006-01-01

The advantages, problems and the recent developments of the actuator with multi degrees of freedom are presented. At first, the advantages of the actuator with multi degrees of freedom are described. Next, the problems needed to solve for practical use are presented. The recent applications of the actuator with multi degrees of freedom are also reviewed.

Lens positioner with five degrees of freedom

International Nuclear Information System (INIS)

Kobierecki, M.W.; Rienecker, F. Jr.

1978-01-01

A device for positioning lenses precisely with five degrees of freedom (three translations and two angular rotations). The unique features of the device are its compact design, large clear aperture, and high degree of positioning accuracy combined with five degrees of freedom in axis motion. Thus, the device provides precision and flexibility in positioning of optical components

High degree modes and instrumental effects

Energy Technology Data Exchange (ETDEWEB)

Korzennik, S G [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States); Rabello-Soares, M C; Schou, J [Stanford University, Stanford, CA (United States)], E-mail: skorzennik@cfa.harvard.edu

2008-10-15

Full-disk observations taken with the Michelson Doppler Imager (MDI) on board the Solar and Heliospheric Observatory (SOHO) spacecraft, or the upgraded Global Oscillations Network Group (GONG) instruments, have enough spatial resolution to resolve modes up to {iota} = 1000 if not {iota} = 1500. The inclusion of such high-degree modes (i.e., {iota} {<=} 1000) improves dramatically inferences near the surface. Unfortunately, observational and instrumental effects cause the characterization of high degree modes to be quite complicated. Indeed, the characteristics of the solar acoustic spectrum are such that, for a given order, mode lifetimes get shorter and spatial leaks get closer in frequency as the degree of a mode increases. A direct consequence of this property is that individual modes are resolved only at low and intermediate degrees. At high degrees the individual modes blend into ridges and the power distribution of the ridge defines the ridge central frequency, masking the underlying mode frequency. An accurate model of the amplitude of the peaks that contribute to the ridge power distribution is needed to recover the underlying mode frequency from fitting the ridge. We present a detailed discussion of the modeling of the ridge power distribution, and the contribution of the various observational and instrumental effects on the spatial leakage, in the context of the MDI instrument. We have constructed a physically motivated model (rather than an ad hoc correction scheme) that results in a methodology that can produce unbiased estimates of high-degree modes. This requires that the instrumental characteristics are well understood, a task that has turned out to pose a major challenge. We also present our latest results, where most of the known instrumental and observational effects that affect specifically high-degree modes were removed. These new results allow us to focus our attention on changes with solar activity. Finally, we present variations of mode

Meson degrees of freedom in nuclei

International Nuclear Information System (INIS)

Delorme, J.

1982-01-01

A review is presented of the successes and shortcomings of the theory of meson degrees of freedom in nuclei with special emphasis on recent progress and on the necessity to bridge the gap with the degrees of freedom of QCD theory. (orig.)

Travel: a long-range goal of retired women.

Science.gov (United States)

Staats, Sara; Pierfelice, Loretta

2003-09-01

The authors surveyed retired persons (predominately women) with regard to their immediate, intermediate, and long-range activities following retirement. As predicted, leisure travel emerged as a frequent long-range goal for persons retired more than 5 years. The travel activity preferences of long-retired older women present challenges and opportunities to both researchers and marketers. Length of trips and frequency of trips have been predicted from regression models, with trip length in particular being well predicted by the problem of daily life hassles. A theoretical model of continued post-retirement travel is presented as a variant of Solomon's opponent process theory of affect (R. L. Solomon, 1980). The authors suggest that to the degree that places traveled to are varied and different, older people may remain stimulated and continue to enjoy retirement.

Identifying the Alteration Patterns of Brain Functional Connectivity in Progressive Mild Cognitive Impairment Patients: A Longitudinal Whole-Brain Voxel-Wise Degree Analysis.

Science.gov (United States)

Deng, Yanjia; Liu, Kai; Shi, Lin; Lei, Yi; Liang, Peipeng; Li, Kuncheng; Chu, Winnie C W; Wang, Defeng

2016-01-01

Patients with mild cognitive impairment (MCI) are at high risk for developing Alzheimer's disease (AD), while some of them may remain stable over decades. The underlying mechanism is still not fully understood. In this study, we aimed to explore the connectivity differences between progressive MCI (PMCI) and stable MCI (SMCI) individuals on a whole-brain scale and on a voxel-wise basis, and we also aimed to reveal the differential dynamic alteration patterns between these two disease subtypes. The resting-state functional magnetic resonance images of PMCI and SMCI patients at baseline and year-one were obtained from the Alzheimer's Disease Neuroimaging Initiative dataset, and the progression was determined based on a 3-year follow-up. A whole-brain voxel-wise degree map that was calculated based on graph-theory was constructed for each subject, and then the cross-sectional and longitudinal analyses on the degree maps were performed between PMCI and SMCI patients. In longitudinal analyses, compared with SMCI group, PMCI group showed decreased long-range degree in the left middle occipital/supramarginal gyrus, while the short-range degree was increased in the left supplementary motor area and middle frontal gyrus and decreased in the right middle temporal pole. A significant longitudinal alteration of decreased short-range degree in the right middle occipital was found in PMCI group. Taken together with previous evidence, our current findings may suggest that PMCI, compared with SMCI, might be a "severe" presentation of disease along the AD continuum, and the rapidly reduced degree in the right middle occipital gyrus may have indicative value for the disease progression. Moreover, the cross-sectional comparison results and corresponding receiver-operator characteristic-curves analyses may indicate that the baseline degree difference is not a good predictor of disease progression in MCI patients. Overall, these findings may provide objective evidence and an indicator

Identifying the Alternation Patterns of Brain Functional Connectivity in Progressive Mild Cognitive Impairment Patients: A Longitudinal Whole-brain Voxel-wise Degree Analysis

Directory of Open Access Journals (Sweden)

Yanjia Deng

2016-08-01

Full Text Available Patients with mild cognitive impairment (MCI are at high risk for developing Alzheimer’s disease (AD, while some of them may remain stable over decades. The underlying mechanism is still not fully understood. In this study, we aimed to explore the connectivity differences between progressive MCI (PMCI and stable MCI (SMCI individuals on a whole-brain scale and on a voxel-wise basis, and we also aimed to reveal the differential dynamic alternation patterns between these two disease subtypes. The resting-state functional magnetic resonance images of PMCI and SMCI patients at baseline and year-one were obtained from the Alzheimer’s Disease Neuroimaging Initiative dataset, and the progression was determined based on a three-year follow-up. A whole-brain voxel-wise degree map that was calculated based on graph-theory was constructed for each subject, and then the cross-sectional and longitudinal analyses on the degree maps were performed between PMCI and SMCI patients. In longitudinal analyses, compared with SMCI group, PMCI group showed decreased long-range degree in the left middle occipital/supramarginal gyrus, while the short-range degree was increased in the left supplementary motor area and middle frontal gyrus and decreased in the right middle temporal pole. A significant longitudinal alteration of decreased short-range degree in the right middle occipital was found in PMCI group. Taken together with previous evidence, our current findings may suggest that PMCI, compared with SMCI, might be a severe presentation of disease along the AD continuum, and the rapidly reduced degree in the right middle occipital gyrus may have indicative value for the disease progression. Moreover, the cross-sectional comparison results and corresponding receiver-operator characteristic-curves analyses may indicate that the baseline degree difference is not a good predictor of disease progression in MCI patients. Overall, these findings may provide objective

Mountain erosion over 10 yr, 10 k.y., and 10 m.y. time scales

Science.gov (United States)

James W. Kirchner; Robert C. Finkel; Clifford S. Riebe; Darryl E. Granger; James L. Clayton; John G. King; Walter F. Megahan

2001-01-01

We used cosmogenic 10Be to measure erosion rates over 10 k.y. time scales at 32 Idaho mountain catchments, ranging from small experimental watersheds (0.2 km2) to large river basins (35 000 km2). These long-term sediment yields are, on average, 17 times higher than stream sediment fluxes measured over...

Population prevalence of first- and second-degree family history of breast and ovarian cancer.

Science.gov (United States)

Moghimi-Dehkordi, B; Safaee, A; Vahedi, M; Pourhoseingholi, M A; Pourhoseingholi, A; Zali, M R

2011-12-01

Family cancer history is an important risk factor for common cancers, thus, recognizing pattern of familial cancer can help us to identify individuals who may have higher chance to develop specified cancers. This cross-sectional survey assessed family history of cancer in first- and second degree relatives. Totally, 7,300 persons aged > or = 20 years selected by random sampling from Tehran general population. Age- and sex-specified prevalence of breast and ovarian cancer in respondent's family was calculated. Of all, 279(4.3%) individuals reported a history of breast or ovarian cancer in their relatives. The prevalence of breast cancer family history was 1.8% among first-degree relatives and 2.5% among second- degree relatives. For ovarian cancer, first- and second-degree prevalence ranged from 0.05 to 0.12%. Those with family history of cancer were more often young and female. Overall, the estimates of prevalence presented here are likely to be conservative compared with actual current prevalence because of some limitations. While family history is an important risk factor for common cancers such as breast cancer, recognizing pattern of familial cancer that signify increased risk can help us to identify individuals who may have higher chance to develop specified cancers.

Dentin bond strength and degree of conversion evaluation of experimental self-etch adhesive systems

OpenAIRE

Yazdi, Fatemeh-Maleknejad; Moosavi, Horieh; Atai, Mohammad; Zeynali, Mahsa

2015-01-01

Background The aim of this study was to investigate the effect of different concentrations of 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) monomer in one-step self-etch experimental adhesives on dentinal microshear bond strength (?SBS), their degree of conversion and bonded micro structure. Material and Methods Composite resin cylinders (Clearfil AP-X) were bonded on human sound molar dentinal surfaces by using five experimental one-step self-etching adhesives (1-SEAs) containing 0% ...

Standard test method for determination of reference temperature, to, for ferritic steels in the transition range

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This test method covers the determination of a reference temperature, To, which characterizes the fracture toughness of ferritic steels that experience onset of cleavage cracking at elastic, or elastic-plastic KJc instabilities, or both. The specific types of ferritic steels (3.2.1) covered are those with yield strengths ranging from 275 to 825 MPa (40 to 120 ksi) and weld metals, after stress-relief annealing, that have 10 % or less strength mismatch relative to that of the base metal. 1.2 The specimens covered are fatigue precracked single-edge notched bend bars, SE(B), and standard or disk-shaped compact tension specimens, C(T) or DC(T). A range of specimen sizes with proportional dimensions is recommended. The dimension on which the proportionality is based is specimen thickness. 1.3 Median KJc values tend to vary with the specimen type at a given test temperature, presumably due to constraint differences among the allowable test specimens in 1.2. The degree of KJc variability among specimen types i...

Astronomy Enrollments and Degrees: Results from the 2012 Survey of Astronomy Enrollments and Degrees. Focus On

Science.gov (United States)

Mulvey, Patrick; Nicholson, Starr

2014-01-01

Interest in astronomy degrees in the U.S. remains strong, with astronomy enrollments at or near all-time highs for the 2012-13 academic year. The total number of students taking an introductory astronomy course at a degree-granting physics or astronomy department is approaching 200,000. Enrollments in introductory astronomy courses have been…

Branding the bio/biomedical engineering degree.

Science.gov (United States)

Voigt, Herbert F

2011-01-01

The future challenges to medical and biological engineering, sometimes referred to as biomedical engineering or simply bioengineering, are many. Some of these are identifiable now and others will emerge from time to time as new technologies are introduced and harnessed. There is a fundamental issue regarding "Branding the bio/biomedical engineering degree" that requires a common understanding of what is meant by a B.S. degree in Biomedical Engineering, Bioengineering, or Biological Engineering. In this paper we address some of the issues involved in branding the Bio/Biomedical Engineering degree, with the aim of clarifying the Bio/Biomedical Engineering brand.

CSDA range, stopping power and mean penetration depth energy relationships in some hydrocarbons and biologic materials for 10 eV to 100 MeV with the modified Rohrlich-Carlson model

Energy Technology Data Exchange (ETDEWEB)

Guemues, Hasan [Ondokuz Mayis University, Department of Physics, Faculty of Sciences and Arts, Samsun (Turkey); Bentabet, Abdelouahab [Bordj Bou Arreridj University, LCVRN, SNVSTU Faculty, El Anasser (Algeria)

2017-05-15

In this study, for some hydrocarbons and biological compounds, stopping power formula are presented, being valid for low and intermediate electron energies. In addition, calculation of the continuous slowing down approximation range (CSDA range) from the stopping power is also made. Calculation of the CSDA range for some hydrocarbons: C{sub 2}H{sub 6} (ethane), C{sub 4}H{sub 10} (butane), C{sub 6}H{sub 14} (hexane) C{sub 8}H{sub 18} (octane), C{sub 5}H{sub 5}N{sub 5} (adenine) and C{sub 5}H{sub 5}N{sub 5}O (guanine) have been introduced for incident electrons in the energy range 30 eV to 1 MeV. The range of electrons has been calculated within the continuous slowing down approximation (CSDA) using modified Rohrlich and Carlson formula of stopping power. Besides, we have calculated the mean penetration depths using a spherical geometric model developed by Bentabet (Vacuum 86:1855-1859, 35). The results have been compared with the other theoretical results, Monte Carlo code such as PENELOPE predictions and semi-empirical results. The calculated results of CSDA ranges for electrons in the energy range from 20 eV to 100 MeV are found to be in good agreement to within 10% with available date. (orig.)

A new method for assessment of the sludge disintegration degree with the use of differential centrifugal sedimentation.

Science.gov (United States)

Silvestri, Daniele; Wacławek, Stanisław; Gončuková, Zuzanna; Padil, Vinod V T; Grübel, Klaudiusz; Černík, Miroslav

2018-05-24

A novel method for assessing the disintegration degree (DD) of waste activated sludge (WAS) with the use of differential centrifugal sedimentation method (DCS) was shown herein. The method was validated for a WAS sample at four levels of disintegration in the range of 14.4-82.6% corresponding to the median particle size range of 8.5-1.6 µm. From the several sludge disintegration methods used (i.e. microwave, alkalization, ultrasounds and peroxydisulfate activated by ultrasounds), the activated peroxydisulfate disintegration resulted in the greatest DD 83% and the smallest median particle size of WAS. Particle size distribution of pretreated sludge, measured by DCS, was in a negative correlation with the DD, determined from soluble chemical oxygen demand (SCOD; determination coefficient of 0.995). Based on the obtained results, it may be concluded that the DCS analysis can approximate the WAS disintegration degree.

Densification, phase stability and in vitro biocompatibility property of hydroxyapatite-10 wt% silver composites.

Science.gov (United States)

Nath, Shekhar; Kalmodia, Sushma; Basu, Bikramjit

2010-04-01

In this paper, we demonstrate how a simple fabrication route, i.e., pressureless sintering of mechanically mixed powders can be employed to develop hydroxyapatite (HAp, Ca(10)(PO(4))(6)(OH)(2))-silver (Ag) bioceramic composites with superior combination of physical (hardness, toughness), non-cytotoxicity, cytocompatiblity and anti-microbial property. The densification results show that such composites can be sintered at 1200 degrees C for 2 h near to theoretical density (>98% rho(th).) An important observation is that the dissociation of HAp phase can be prevented during sintering up to 1300 degrees C for 2 h in HAp-10 wt% Ag composites. The stability of HAp in presence of silver is discussed in reference to the results obtained using XRD, FTIR and Raman spectroscopy. The hardness values of the composites are comparable (approximately 6.5 GPa) to that of pure HAp, despite of the presence of softer Ag particles. The sintered composites exhibit modest crack growth resistance property and their toughness varies in the range of 0.9-1.2 MPa m(0.5), depending on sintering temperature. For selected samples, the in vitro characterization was performed using mouse fibroblast (L929) and human osteosarcoma (MG63) cell lines. The combination of biochemical assays (MTT, ALP and osteocalcin) confirm that HAp-10 wt% Ag biocomposites have comparable or even better cellular viability, osteogenic differentiation and bone mineralization as well as osteoinduction property. Antibacterial experiments involving gram-negative bacteria, Escherichia coli confirm excellent bactericidal property of HAp-10 wt% Ag composites, sintered using mechanically mixed powders.

Long-Range Lightning Products for Short Term Forecasting of Tropical Cyclogenesis

Science.gov (United States)

Businger, S.; Pessi, A.; Robinson, T.; Stolz, D.

2010-12-01

This paper will describe innovative graphical products derived in real time from long-range lightning data. The products have been designed to aid in short-term forecasting of tropical cyclone development for the Tropical Cyclone Structure Experiment 2010 (TCS10) held over the western Pacific Ocean from 17 August to 17 October 2010 and are available online at http://www.soest.hawaii.edu/cgi-bin/pacnet/tcs10.pl. The long-range lightning data are from Vaisala’s Global Lightning Data 360 (GLD360) network and include time, location, current strength, polarity, and data quality indication. The products currently provided in real time include i. Infrared satellite imagery overlaid with lighting flash locations, with color indication of current strength and polarity (shades of blue for negative to ground and red for positive to ground). ii. A 15x15 degree storm-centered tile of IR imagery overlaid with lightning data as in i). iii. A pseudo reflectivity product showing estimates of radar reflectivity based on lightning rate - rain rate conversion derived from TRMM and PacNet data. iv. A lightning history product that plots each hour of lightning flash locations in a different color for a 12-hour period. v. Graphs of lightning counts within 50 or 300 km radius, respectively, of the storm center vs storm central sea-level pressure. vi. A 2-D graphic showing storm core lightning density along the storm track. The first three products above can be looped to gain a better understanding of the evolution of the lightning and storm structure. Examples of the graphics and their utility will be demonstrated and discussed. Histogram of lightning counts within 50 km of the storm center and graph of storm central pressure as a function of time.

Home range and travels

Science.gov (United States)

Stickel, L.F.; King, John A.

1968-01-01

. Peromyscus generally used and maintained several or many different home sites and refuges in various parts of their home ranges, and frequently shifted about so that their principal activities centered on different sets of holes at different times. Once established, many Peromyscus remained in the same general area for a long time, perhaps for the duration of their lives. Extent of their travels in different directions and intensity of use of different portions of their home ranges varied within a general area in response to habitat changes, loss of neighbors, or other factors. Various authors have obtained both direct and indirect evidence of territoriality, in some degree, among certain species of Peromyscus. Young mice dispersed from their birth sites to establish home ranges of their own. Adults also sometimes left their home areas; some re-established elsewhere; others returned after exploratory travels. Most populations contained a certain proportion of transients; these may have been wanderers or individuals exploring out from established home ranges or seeking new ones. When areas were depopulated by removal trapping, other Peromyscus invaded. Invasion rates generally followed seasonal trends of reproduction and population density. Peromyscus removed from their home areas and released elsewhere returned home from various distances, but fewer returned from greater distances than from nearby; speed of return increased with successive trials. The consensus from present evidence is that ho-ming is made possible by a combination of random wandering and familiarity with a larger area than the day-to-day range. Records of juvenile wanderings during the dispersal phase and of adult explorations very nearly encompassed the distances over which any substantial amount of successful homing occurred. Methods of measuring sizes of home ranges and the limitations of these measurements were discussed in brief synopsis. It was co

Measuring the relativistic perigee advance with satellite laser ranging

CERN Document Server

Iorio, L; Pavlis, E C

2002-01-01

The pericentric advance of a test body by a central mass is one of the classical tests of general relativity. Today, this effect is measured with radar ranging by the perihelion shift of Mercury and other planets in the gravitational field of the Sun, with a relative accuracy of the order of 10 sup - sup 2 -10 sup - sup 3. In this paper, we explore the possibility of a measurement of the pericentric advance in the gravitational field of Earth by analysing the laser-ranged data of some orbiting, or proposed, laser-ranged geodetic satellites. Such a measurement of the perigee advance would place limits on hypothetical, very weak, Yukawa-type components of the gravitational interaction with a finite range of the order of 10 sup 4 km. Thus, we show that, at the present level of knowledge of the orbital perturbations, the relative accuracy, achievable with suitably combined orbital elements of LAGEOS and LAGEOS II, is of the order of 10 sup - sup 3. With the corresponding measured value of (2 + 2 gamma - beta)/3, ...

Every plane graph of maximum degree 8 has an edge-face 9-colouring.

NARCIS (Netherlands)

R.J. Kang (Ross); J.-S. Sereni; M. Stehlík

2011-01-01

textabstractAn edge-face coloring of a plane graph with edge set $E$ and face set $F$ is a coloring of the elements of $E\\cup F$ such that adjacent or incident elements receive different colors. Borodin proved that every plane graph of maximum degree $\\Delta \\ge 10$ can be edge-face colored with

Home range utilization by chacma baboon (Papio ursinus) troops on Suikerbosrand Nature Reserve, South Africa.

Science.gov (United States)

Slater, Kerry; Barrett, Alan; Brown, Leslie R

2018-01-01

Rapid urbanization coupled with decreasing areas of natural habitat are causing baboon populations to become scattered and isolated, often resulting in increased levels of human-baboon conflict. To implement baboon-human conflict management strategies, it is essential to formulate realistic conservation policies that deal with all stakeholder concerns and ensure the conservation of viable baboon populations. A study was initiated in response to complaints of perceived excessive baboon numbers and associated lack of food resources on Suikerbosrand Nature Reserve in South Africa. Data obtained from GPS tracking collars fitted to one baboon from each of 10 identified troops were analyzed to determine home range size and utilization. The spatial representation of home ranges generated from this study will allow reserve management to identify areas of potential high and low human-baboon conflict and will contribute to the development of a formal baboon management plan to reduce human-baboon conflict on and around the reserve. Home ranges were unevenly distributed and had a mean size of 26.72 km2 ± 13.91 SD in the cold/dry season and 26.54 km2 ± 12.76 SD in the warm/wet season. Troop home ranges overlapped to some degree and five troops utilized areas outside the reserve. Although no significant relationship between troop size and home range was found, there was a positive relationship between troop size and daily distance travelled. All troops had significantly longer mean daily distances during the warm/wet season than during the cold/dry season (P ≤ 0.02).

Data on ground-water quality for the Lovelock 1 degree by 2 degree quadrangle, western Nevada

Science.gov (United States)

Welch, Alan H.; Williams, Rhea P.

1987-01-01

Water quality data for groundwater has been compiled for the Lovelock 1 degree x 2 degree quadrangle which covers a portion of western Nevada. Chemical characteristics of the water are shown on a map (at a scale of 1:250,000) and on trilinear diagrams for the major ions. The data for the area are also presented in a table. (USGS)

Comparison of thoracic kyphosis degree, trunk muscle strength and joint position sense among healthy and osteoporotic elderly women: a cross-sectional preliminary study.

Science.gov (United States)

Granito, Renata Neves; Aveiro, Mariana Chaves; Renno, Ana Claudia Muniz; Oishi, Jorge; Driusso, Patricia

2012-01-01

Increased thoracic kyphosis is one of the most disfiguring consequences of osteoporotic spine fractures in the elderly. However, mechanisms involved in the increasing of the kyphosis degree among osteoporotic women are not completely understood. Then, the aims of this cross-sectional preliminary study were comparing thoracic kyphosis degree, trunk muscle peak torque and joint position sense among healthy and osteoporotic elderly women and investigating possible factors affecting the kyphosis degree. Twenty women were selected for 2 groups: healthy (n=10) and osteoporotic (n=10) elderly women. Bone mineral density (BMD), thoracic kyphosis degree, trunk muscles peak torque and joint position sense were measured. Differences among groups were analyzed by Student's Test T for unpaired data. Correlations between variables were performed by Pearson's coefficient correlation. The level of significance used for all comparisons was 5% (p≤0.05). We observed that the osteoporotic women demonstrated a significantly higher degree of kyphosis and lower trunk extensor muscle peak torque. Moreover, it was found that the BMD had a negative correlation with the thoracic kyphosis degree. Kyphosis degree showed a negative correlation between extensor muscle strength and joint position sense index. This study suggests that lower BMD may be associated to higher degree of kyphosis degree, lower trunk extensors muscle strength and an impaired joint position sense. It is also suggested that lower extensor muscle strength may be a factor that contributes to the increasing in kyphosis thoracic degree. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Extended Range of a Gun Launched Smart Projectile Using Controllable Canards

Directory of Open Access Journals (Sweden)

Mark Costello

2001-01-01

Full Text Available This effort investigates the extent to which moveable canards can extend the range of indirect fire munitions using both projectile body and canard lift. Implications on terminal velocity and time of flight using this mechanism to extend range are examined for various canard configurations. Performance predictions are conducted using a six-degree-of-freedom simulation model that has previously been validated against range data. The projectile dynamic equations are formed in the body frame and aerodynamic loads from the body and canards are Mach number and angle of attack dependent. The projectile body aerodynamic moments include unsteady aerodynamic damping. The focus of the study is directed toward low cost competent munitions that extend range and as such a simple flight control system is considered which utilizes only timer, roll rate, and roll attitude inputs.

Alteration of frequency range for binaural beats in acute low-tone hearing loss.

Science.gov (United States)

Karino, Shotaro; Yamasoba, Tatsuya; Ito, Ken; Kaga, Kimitaka

2005-01-01

The effect of acute low-tone sensorineural hearing loss (ALHL) on the interaural frequency difference (IFD) required for perception of binaural beats (BBs) was investigated in 12 patients with unilateral ALHL and 7 patients in whom ALHL had lessened. A continuous pure tone of 30 dB sensation level at 250 Hz was presented to the contralateral, normal-hearing ear. The presence of BBs was determined by a subjective yes-no procedure as the frequency of a loudness-balanced test tone was gradually adjusted around 250 Hz in the affected ear. The frequency range in which no BBs were perceived (FRNB) was significantly wider in the patients with ALHL than in the controls, and FRNBs became narrower in the recovered ALHL group. Specifically, detection of slow BBs with a small IFD was impaired in this limited (10 s) observation period. The significant correlation between the hearing level at 250 Hz and FRNBs suggests that FRNBs represent the degree of cochlear damage caused by ALHL.

Wide Operating Voltage Range Fuel Cell Battery Charger

DEFF Research Database (Denmark)

Hernandez Botella, Juan Carlos; Mira Albert, Maria del Carmen; Sen, Gokhan

2014-01-01

DC-DC converters for fuel cell applications require wide voltage range operation due to the unique fuel cell characteristic curve. Primary parallel isolated boost converter (PPIBC) is a boost derived topology for low voltage high current applications reaching an efficiency figure up to 98...... by two the converter input-to-output voltage gain. This allows covering the conditions when the fuel cell stack operates in the activation region (maximum output voltage) and increases the degrees of freedom for converter optimization. The transition between operating modes is studied because represents...

Short, intermediate and long range order in amorphous ices

Science.gov (United States)

Martelli, Fausto; Torquato, Salvatore; Giovanbattista, Nicolas; Car, Roberto

Water exhibits polyamorphism, i.e., it exists in more than one amorphous state. The most common forms of glassy water are the low-density amorphous (LDA) and the high-density amorphous (HDA) ices. LDA, the most abundant form of ice in the Universe, transforms into HDA upon isothermal compression. We model the transformation of LDA into HDA under isothermal compression with classical molecular dynamics simulations. We analyze the molecular structures with a recently introduced scalar order metric to measure short and intermediate range order. In addition, we rank the structures by their degree of hyperuniformity, i.e.,the extent to which long range density fluctuations are suppressed. F.M. and R.C. acknowledge support from the Department of Energy (DOE) under Grant No. DE-SC0008626.

Results of TGE Study in 0.03-10 MeV Energy Range in Ground Experiments near Moscow and Aragats

International Nuclear Information System (INIS)

Bogomolov, V.; Kovalenko, A.; Panasyuk, M.; Saleev, K.; Svertilov, S.; Maximov, I.; Garipov, G.; Iyudin, A.; Chilingarian, A.; Hovsepyan, G.; Karapetyan, T.; Mntasakanyan, E.

2017-01-01

Ground-based experiments with scintillator gamma-spectrometers were conducted to study the spectral, temporal and spatial characteristics of TGES as well, as to search the fast hard X-ray and gamma-ray flashes possibly appearing at the moment of lightning. The time of each gamma-quantum interaction was recorded with ∼15 us accuracy together with detailed spectral data. The measurements are similar to ones reported at TEPA-2015 but some important improvement of the instruments was done for 2016 season. First, GPS module was used to synchronize the instrument time with UTC. The accuracy of such synchronization allows one to look at the gamma-ray data at the moment of lightning fixed by radio-wave detector or any other instrument. Second, the energy range of gamma-spectrometers was shifted to higher energies where the radiation of natural isotopes is absent. In this case one can see background changes connected with particles accelerated in thundercloud together with the background increases during the rain caused by Rn-222 daughters. Long-term measurements with two instruments placed in different points of Moscow region were done in 2016 season. First one based on CsI (Tl) 80x80 mm has energy range 0.03-6 MeV. The range of the second one based on CsI (Tl) 100x100 mm is 0.05-10 MeV. A dozen of thunderstorms with increase of Rn-222 radiation were detected but no significant increase of gamma-ray flux above 3.2 MeV was observed at these periods. A lot of data was obtained from the experiment with small gamma-ray spectrometer (40x40 mm NaI (T1) at mountain altitude in Armenia at Aragats station. The analysis of readings during the TGE periods indicates on the presence of Rn-222 radiation in low-energy range (E< l MeV). The detector was improved during TEPA-2016. New 50x50 mm NaI (Tl) crystal was used and the energy range was prolonged up to 5 MeV. Exact timing with GPS-sensor was added and fast recording of the output signal at the moments of triggers from UV flash

A Novel Topology Control Approach to Maintain the Node Degree in Dynamic Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Yuanjiang Huang

2014-03-01

Full Text Available Topology control is an important technique to improve the connectivity and the reliability of Wireless Sensor Networks (WSNs by means of adjusting the communication range of wireless sensor nodes. In this paper, a novel Fuzzy-logic Topology Control (FTC is proposed to achieve any desired average node degree by adaptively changing communication range, thus improving the network connectivity, which is the main target of FTC. FTC is a fully localized control algorithm, and does not rely on location information of neighbors. Instead of designing membership functions and if-then rules for fuzzy-logic controller, FTC is constructed from the training data set to facilitate the design process. FTC is proved to be accurate, stable and has short settling time. In order to compare it with other representative localized algorithms (NONE, FLSS, k-Neighbor and LTRT, FTC is evaluated through extensive simulations. The simulation results show that: firstly, similar to k-Neighbor algorithm, FTC is the best to achieve the desired average node degree as node density varies; secondly, FTC is comparable to FLSS and k-Neighbor in terms of energy-efficiency, but is better than LTRT and NONE; thirdly, FTC has the lowest average maximum communication range than other algorithms, which indicates that the most energy-consuming node in the network consumes the lowest power.

Isotope toolbox turns 10

DEFF Research Database (Denmark)

Wenander, Fredrik; Riisager, Karsten

2012-01-01

REX-ISOLDE, one of CERN’s most compact accelerators, has just celebrated its 10th anniversary. The machine’s versatility provides radioactive ion beams across the range of nuclear isotopes.......REX-ISOLDE, one of CERN’s most compact accelerators, has just celebrated its 10th anniversary. The machine’s versatility provides radioactive ion beams across the range of nuclear isotopes....

Ionospheric Coherence Bandwidth Measurements in the Lower VHF Frequency Range

Science.gov (United States)

Suszcynsky, D. M.; Light, M. E.; Pigue, M. J.

2015-12-01

The United States Department of Energy's Radio Frequency Propagation (RFProp) experiment consists of a satellite-based radio receiver suite to study various aspects of trans-ionospheric signal propagation and detection in four frequency bands, 2 - 55 MHz, 125 - 175 MHz, 365 - 415 MHz and 820 - 1100 MHz. In this paper, we present simultaneous ionospheric coherence bandwidth and S4 scintillation index measurements in the 32 - 44 MHz frequency range collected during the ESCINT equatorial scintillation experiment. 40-MHz continuous wave (CW) and 32 - 44 MHz swept frequency signals were transmitted simultaneously to the RFProp receiver suite from the Reagan Test Site at Kwajalein Atoll in the Marshall Islands (8.7° N, 167.7° E) in three separate campaigns during the 2014 and 2015 equinoxes. Results show coherence bandwidths as small as ~ 1 kHz for strong scintillation (S4 > 0.7) and indicate a high degree of ionospheric variability and irregularity on 10-m spatial scales. Spread-Doppler clutter effects arising from preferential ray paths to the satellite due to refraction off of isolated density irregularities are also observed and are dominant at low elevation angles. The results are compared to previous measurements and available scaling laws.

Spatial structure determination of (√3 x √3)R30 degrees and (1.5 x 1.5)R18 degrees CO on Cu(111) using angle-resolved photoemission extended fine structure

International Nuclear Information System (INIS)

Moler, E.J.; Kellar, S.A.; Huff, W.R.A.

1997-01-01

The authors report a study of the spatial structure of (√3 x √3)R30 degrees (low coverage) and (1.5 x 1.5)R18 degrees (intermediate coverage) CO adsorbed on Cu(111), using the Angle-Resolved Photoemission Extended Fine Structure (ARPEFS) technique at beamline 9.3.2 at the Advanced Light Source. The CO molecule adsorbs on an atop site for both adsorption phases. Full multiple-scattering spherical-wave (MSSW) calculations were used to extract the C-Cu. bond length and the first Cu-Cu layer spacing for each adsorption phase. The authors find that the C-Cu bond length remains unchanged with increasing coverage, but the 1st Cu-Cu layer spacing contracts at the intermediate coverage. They calculate the bending mode force constant in the (1.5 x 1.5)R18 degrees phase to be K δ = 2.2 (1) x 10 -12 dyne-cm/rad from their experimentally determined bond lengths combined with previously published infra-red absorption frequencies

Scaling and charge ratio in the energy range 1-10 TeV

International Nuclear Information System (INIS)

Baradzej, L.T.; Kanevskaya, E.A.; Smorodin, Yu.A.

1976-01-01

The purpose of the investigation was to study the spectra of generation of neutral and charged pions in the upper atmosphere in order to establish the scaling behaviour of the multiple birth of particles at primary particle energies above the acceleration energies. The study of the spectrum gamma-quanta in the atmosphere and the muon spectrum at the sea level made it possible to adjust the pion generation spectrum. In experiments with emulsion chambers the spectra of gamma-quanta and electrons at different zenith angles at two levels in the atmosphere (225 and 700 gxcm -2 ) and the muon spectrum at the sea level were determined. The obtained data on pion birth in the atmosphere pointed to the conservation of scale and charge invariance in pion birth at nucleon energies of 10 12 -10 14 eV

Effect of degree of polymerization and of temperature on the reactivity of poly(vinyl alcohol) by applying T-for-H exchange reaction

International Nuclear Information System (INIS)

Imaizumi, Hiroshi; Imai, Kazunari

1999-01-01

In order to reveal the effect of the degree of polymerization and of temperature on the reactivity of functional polymers, the hydrogen-isotope exchange reaction between poly(vinyl alcohol) (PVA) having each degree of polymerization and tritiated water vapor (HTO vapor) was dynamically observed at 35-80 deg C in a gas-solid system. The reason of the observation at 35 deg C is to clarify the possibility of the T-for-H exchange reaction at a temperature near the environment. The degree of polymerization of PVA used in this work was 500, 1000, 2000, 2800, or 3500. Applying the A''-McKay plot method to the data obtained in each observation, the rate constant (k) for each PVA in the reaction was calculated. Moreover, the Arrhenius plot for each PVA was made by using the k values. Comparing the k values and the results obtained previously, the following six matters have been clarified. In the temperature range of 35-80 deg C, the T-for-H exchange reaction between HTO vapor and each PVA occurred, and in this case, the atoms participating in the reaction are the H atoms in the OH groups in PVA and T atoms in HTO vapor. The reactivity of each PVA increases with rising temperature, and decreases with increasing the degree of polymerization. The rate of the decreasing of k with increasing the degree of polymerization changes at near the degree of polymerization of 1000, and the rate is fairly large under the degree of 1000. Under the degree of polymerization of 1000, the reactivity of PVA is more affected by the effect of the degree of polymerization than by the effect of temperature, and the reactivity is large when the degree of polymerization is small. Over the degree of polymerization of 1000, the reactivity of PVA is affected by both the degree of polymerization and temperature, and the reactivity is large when temperature is high. For the T-for-H exchange reaction in a gas-solid system, the reaction form is unchanged in the range of 35-80 deg C, and the reactivity at 35

The initial safe range of motion of the ankle joint after three methods of internal fixation of simulated fractures of the medial malleolus.

Science.gov (United States)

Shimamura, Yoshio; Kaneko, Kazuo; Kume, Kazuhiko; Maeda, Mutsuhiro; Iwase, Hideaki

2006-07-01

Previous studies have demonstrated the safe passive range of ankle motion for inter-bone stiffness after internal fixation under load but there is a lack of information about the safe range of ankle motion for early rehabilitation in the absence of loading. The present study was designed to assess the effect of ankle movement on inter-bone displacement characteristics of medial malleolus fractures following three types of internal fixation to determine the safe range of motion. Five lower legs obtained during autopsy were used to assess three types of internal fixation (two with Kirschner-wires alone; two with Kirschner-wires plus tension band wiring; and, one with an AO/ASIF malleolar screw alone). Following a simulated fracture by sawing through the medial malleolus the displacement between the fractured bone ends was measured during a passive range of movement with continuous monitoring using omega (Omega) shaped transducers and a biaxial flexible goniometer. Statistical analysis was performed with repeated measures analysis of variance. Inter-bone displacement was not proportional to the magnitude of movement throughout the range of ankle motion as, when separation exceeded 25 microm, there was increasingly wide separation as plantar-flexion or dorsal-flexion was increased. There was no statistical significant difference between the small amount of inter-bone displacement observed with three types of fixation within the safe range of dorsal-flexion and plantar-flexion for early rehabilitation. However the inter-bone separation when fixation utilized two Kirschner-wires alone tended to be greater than when using the other two types of fixation during dorsal-flexion and eversion. The present study revealed a reproducible range of ankle motion for early rehabilitation which was estimated to be within the range of 20 degrees of dorsal-flexion and 10 degrees of plantar-flexion without eversion. Also, internal fixation with two Kirschner-wires alone does not seem to

Nuclear forces and quark degrees of freedom

International Nuclear Information System (INIS)

Lacombe, M.; Loiseau, B.; Vinh Mau, R.; Demetriou, P.; Pantis, C.

1999-01-01

Attempts to derive the NN forces from the quark and gluon degrees of freedom have been made so far in the framework of the nonrelativistic quark-cluster model (QCM). The justification of such a model is based on the remarkable success in describing the static properties of single hadrons. In the earlier calculations, the NN s-wave phase shifts obtained with the QCM show that the model produces repulsive NN forces at short distances, which constitutes a success for the model, but fails to provide the intermediate range attraction indispensable for binding nucleons in nuclei. This drawback is amended within the context of these models, at the expense of introducing by hand intermediate-range attraction through meson-exchange potentials between quarks or/and between nucleons (quark clusters). This procedure improves the results for the phase shifts and it is often concluded that the QCM provides a good description of the short-range (SR) part of the NN potential. In our opinion, the above procedure does not provide a rigorous test of the validity of the quark-cluster model. In order to get a clear-cut conclusion one should consider the QCM in association with an accurate and well founded model for the long-medium-range (LR+MR) forces. For these reason we study a NN interaction model which satisfies this requirement. In this model, the LR+MR parts are given by the Paris NN potential and the SR part by the QCM. The quality of the model is then tested by confronting directly its predictions with data on observables rather then, as it is usually done, with phase shifts. We compute all the observables for pp and np scattering at energies below the pion production threshold for different QCM versions corresponding to different qq interactions. The results are then compared with the existing world set data. Preliminary results show that the agreement with experiment is not good. (authors)

Fluorescence based fibre optic pH sensor for the pH 10-13 range suitable for corrosion monitoring in concrete structures

OpenAIRE

Nguyen, T.H.; Venugopala, T.; Chen, S.; Sun, T.; Grattan, K. T. V.; Taylor, S.E.; Basheer, P.A.M.; Long, A.E.

2014-01-01

The design, development and evaluation of an optical fibre pH sensor for monitoring pH in the alkaline region are discussed in detail in this paper. The design of this specific pH sensor is based on the pH induced change in fluorescence intensity of a coumarin imidazole dye which is covalently attached to a polymer network and then fixed to the distal end of an optical fibre. The sensor provides a response over a pH range of 10.0 – 13.2 with an acceptable response rate of around 50 minutes, h...

Performance of the ATLAS Zero Degree Calorimeter

CERN Document Server

Leite, M; The ATLAS collaboration

2013-01-01

The ATLAS Zero Degree Calorimeter (ZDC) at the Large Hadron Collider (LHC) is a set of two sampling calorimeters modules symmetrically located at 140m from the ATLAS interaction point. The ZDC covers a pseudorapidity range of |eta| > 8.3 and it is both longitudinally and transversely segmented, thus providing energy and position information of the incident particles. The ZDC is installed between the two LHC beam pipes, in a configuration such that only the neutral particles produced at the interaction region can reach this calorimeter. The ZDC uses Tungsten plates as absorber material and rods made of quartz interspersed in the absorber as active media. The energetic charged particles crossing the quartz rods produces Cherenkov light which is then detected by photomultipliers and sent to the front end electronics for processing, in a total of 120 individual electronic channels. The Tungsten plates and quartz rods are arranged in a way to segment the calorimeters in 4 longitudinal sections. The first section (...

Investigation of geothermal fields in himalayan range in pakistan using isotope and chemical techniques

International Nuclear Information System (INIS)

Ahmad, M.; Sheikh, M.R.; Akram, W.; Tasneem, M.A.; Iqbal, N.; Latif, Z.

2007-07-01

There are many geothermal sites in Himalayan belt of Pakistan having low to high temperatures(boiling water). Isotopes and geochemical techniques were applied to investigate the origin, subsurface history and reservoir temperatures of geothermal fields at Tatta Pani and Tato lying along Main Mantle Thrust, Murtazabad along Main Karakoram Thrust and Kotli in the area of overlapping thrusts: Punjal Thrust, Main Boundary Thrust and the Himalaya Frontal Thrust. Discharge of the springs varies from 30 to 2000 liters per minute with the surface temperature from 47.3 to 92 degree C. Two sets of water samples were collected from these fields. The samples were analyzed for various isotopes (O/sup 18/, H/sup 2/ and H/sup 3/ of water; C/sup 13/ of dissolved inorganic carbon; S/sup 34/ and O/sup 18/ of dissolved sulphates); and water chemistry. The thermal waters of the Northern Areas of Pakistan are generally neutral to slightly alkaline and have low dissolved contents. Sodium is the dominant cation in all the cases. In terms of anions, HCO/sub 3/ is dominating. Source of recharge is meteoric water (rains and/or snow-melt). The dominant process of cooling is conduction at Tatta Pani, Tato, and Murtazabad. Shallow groundwater is mixing with the thermal springs in different proportions at Murtazabad, while there is no mixing in the thermal waters of Tatta Pani and Tato. The equilibrium temperature of the thermal end-member at Murtazabad is in the range of 185- 225 degree C and the isochemical-mixing model based on the Na-K and quartz geothermometers estimates 227 degree C temperature. O/sup 18/ (SO/sub 4/-H/sub 2/O) geothermometer indicates equilibrium temperatures (before mixing) above I85 degree C. The dissolved silica vs. enthalpy plot suggests heat losses through conduction from the original temperature about 245 degree C. The reservoir temperatures of Tatta Pani (100-130 degree C) determined by the Na-K, K-Mg and quartz geothermometers are in good agreement. O/sup 18/ (SO

Strategies for Pursuing a Master's Degree.

Science.gov (United States)

Thomas, Cynthia M; McIntosh, Constance E; Mensik, Jennifer S

2016-01-01

Health care has become very complex and is in a constant state of change. As a result of the evolving change and increasing complexity, a more educated nursing workforce is needed (Dracup K. Master's nursing programs. American Association of Colleges of Nursing. 2015; Institute of Medicine. The Future of Nursing: Leading Change, Advancing Health. 2010). It is now becoming necessary for registered nurses to earn an advanced degree to work at the highest level of their practice authority (Dracup K. Master's nursing programs. American Association of Colleges of Nursing. 2015; Institute of Medicine. The Future of Nursing: Leading Change, Advancing Health. 2010.). Preparing to reenter college may be an overwhelming prospect for some registered nurses seeking an advanced degree. However, there are some simple strategies that may help sort out the many degree options, financial obligations, decisions about brick and mortar versus online learning, commitment to degree completion, and changing career paths. This article will provide the registered nurse valuable information that will assist in the exciting process of returning to college.

Phase-matching properties of LiGaSe2 for SHG and SFG in the 1.026-10.5910 μm range.

Science.gov (United States)

Miyata, Kentaro; Petrov, Valentin; Kato, Kiyoshi

2017-08-01

This paper reports on the new experimental results for second-harmonic generation and sum-frequency generation in LiGaSe 2 in the 1.026-10.5910 μm range, and the improved Sellmeier equations that provide a good reproduction of the present experimental results, as well as the published data points for a Ti:Al 2 O 3 laser (λ=0.8200  μm)-pumped optical parametric amplifier and a Nd:YAG laser-pumped optical parametric oscillator in the mid-IR.

The degree of irreversibility in deterministic finite automata

DEFF Research Database (Denmark)

Axelsen, Holger Bock; Holzer, Markus; Kutrib, Martin

2016-01-01

the language, and show that the degree induces a strict infinite hierarchy of languages. We examine how the degree of irreversibility behaves under the usual language operations union, intersection, complement, concatenation, and Kleene star, showing tight bounds (some asymptotically) on the degree....

Fractal and digital image processing to determine the degree of dispersion of carbon nanotubes

International Nuclear Information System (INIS)

Liang, Xiao-ning; Li, Wei

2016-01-01

The degree of dispersion is an important parameter to quantitatively study properties of carbon nanotube composites. Among the many methods for studying dispersion, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy are the most commonly used, intuitive, and convincing methods. However, they have the disadvantage of not being quantitative. To overcome this disadvantage, the fractal theory and digital image processing method can be used to provide a quantitative analysis of the morphology and properties of carbon nanotube composites. In this paper, the dispersion degree of carbon nanotubes was investigated using two fractal methods, namely, the box-counting method and the differential box-counting method. On the basis of the results, we propose a new method for the quantitative characterization of the degree of dispersion of carbon nanotubes. This hierarchical grid method can be used as a supplementary method, and can be combined with the fractal calculation method. Thus, the accuracy and effectiveness of the quantitative characterization of the dispersion degree of carbon nanotubes can be improved. (The outer diameter of the carbon nanotubes is about 50 nm; the length of the carbon nanotubes is 10–20 μm.)

Fractal and digital image processing to determine the degree of dispersion of carbon nanotubes

Energy Technology Data Exchange (ETDEWEB)

Liang, Xiao-ning, E-mail: xnliang0506@163.com; Li, Wei, E-mail: 1099006@mail.dhu.edu.cn, E-mail: liwei@dhu.edu.cn, E-mail: waiwentougao@outlook.com [Donghua University, College of Textiles (China)

2016-05-15

The degree of dispersion is an important parameter to quantitatively study properties of carbon nanotube composites. Among the many methods for studying dispersion, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy are the most commonly used, intuitive, and convincing methods. However, they have the disadvantage of not being quantitative. To overcome this disadvantage, the fractal theory and digital image processing method can be used to provide a quantitative analysis of the morphology and properties of carbon nanotube composites. In this paper, the dispersion degree of carbon nanotubes was investigated using two fractal methods, namely, the box-counting method and the differential box-counting method. On the basis of the results, we propose a new method for the quantitative characterization of the degree of dispersion of carbon nanotubes. This hierarchical grid method can be used as a supplementary method, and can be combined with the fractal calculation method. Thus, the accuracy and effectiveness of the quantitative characterization of the dispersion degree of carbon nanotubes can be improved. (The outer diameter of the carbon nanotubes is about 50 nm; the length of the carbon nanotubes is 10–20 μm.)

Fasting and postprandial serum bile acid concentrations in 10 healthy female red-eared terrapins (Trachemys scripta elegans).

Science.gov (United States)

Knotkova, Z; Dorrestein, G M; Jekl, V; Janouskova, J; Knotek, Z

2008-10-25

The fasting and postprandial serum concentrations of bile acids and other blood constituents were measured in a group of 10 clinically healthy, female, six-year-old captive red-eared terrapins (Trachemys scripta elegans). The terrapins were housed in a temperate room and maintained in four aquaria in which the water temperature ranged from 24 to 27 degrees C and the temperature above the basking site ranged from 27 to 30 degrees C. The serum concentrations of bile acids were measured four times in a period of five months, and at the second sampling the fasting and two postprandial (after 24 and 48 hours) serum concentrations of total protein, albumin, glucose, uric acid, cholesterol, triglycerides, alkaline phosphatase, alanine aminotransferase, aspartate aminotransferase, lactate dehydrogenase, and bile acids were determined. Coelioscopy revealed vitellogenic and previtellogenic follicles on the ovaries of all the terrapins, and eggs with calcified shells were detected in two of them. The livers were mostly pink to deep yellow in colour, with sharp edges, a smooth serosal surface, distinct large superficial vessels, and multifocal melanin deposits. Liver biopsies revealed fine, more or less oil red O-positive lipid droplets in all the hepatocytes, but in none of the cases was it considered to be pathological lipidosis. The mean (sd) bile acid concentrations ranged from 7.35 (4.52) to 10.04 (7.40) micromol/l. The fasting and postprandial concentrations were 3.1 (2.3), 4.5 (5.4) (24 hours) and 2.2 (1.5) (48 hours) micromol/l. High concentrations between 27.6 and 66.6 micromol/l were associated with lipaemia. There were no significant differences between the biochemical profiles of the fasting and postprandial serum samples.

Measuring the relativistic perigee advance with satellite laser ranging

International Nuclear Information System (INIS)

Iorio, Lorenzo; Ciufolini, Ignazio; Pavlis, Erricos C

2002-01-01

The pericentric advance of a test body by a central mass is one of the classical tests of general relativity. Today, this effect is measured with radar ranging by the perihelion shift of Mercury and other planets in the gravitational field of the Sun, with a relative accuracy of the order of 10 -2 -10 -3 . In this paper, we explore the possibility of a measurement of the pericentric advance in the gravitational field of Earth by analysing the laser-ranged data of some orbiting, or proposed, laser-ranged geodetic satellites. Such a measurement of the perigee advance would place limits on hypothetical, very weak, Yukawa-type components of the gravitational interaction with a finite range of the order of 10 4 km. Thus, we show that, at the present level of knowledge of the orbital perturbations, the relative accuracy, achievable with suitably combined orbital elements of LAGEOS and LAGEOS II, is of the order of 10 -3 . With the corresponding measured value of (2 + 2γ - β)/3, by using η = 4β - γ - 3 from lunar laser ranging, we could get an estimate of the PPN parameters γ and β with an accuracy of the order of 10 -2 -10 -3 . Nevertheless, these accuracies would be substantially improved in the near future with the new Earth gravity field models by the CHAMP and GRACE missions. The use of the perigee of LARES (LAser RElativity Satellite), with a suitable combination of orbital residuals including also the node and the perigee of LAGEOS II, would also further improve the accuracy of the proposed measurement

Time to Degree: A National View of the Time Enrolled and Elapsed for Associate and Bachelor's Degree Earners. (Signature Report No. 11)

Science.gov (United States)

Shapiro, Doug; Dundar, Afet; Wakhungu, Phoebe Khasiala; Yuan, Xin; Nathan, Angel; Hwang, Youngsik

2016-01-01

This report examines time to degree completion for a cohort of students who earned an associate degree as their first and only postsecondary degree or a bachelor's degree as their first four-year degree between July 1, 2014, and June 30, 2015. Overall, the average time enrolled for associate and bachelor's degree earners was 3.3 years and 5.1…

Astronautics Degrees for Space Industry

Science.gov (United States)

Gruntman, M.; Brodsky, R.; Erwin, D.; Kunc, J.

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science degree program in Astronautics combines basic science and engineering classes with specialized astronautics classes. The Master of Science degree program in Astronautics offers classes in various areas of space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers. The new world of distance learning presents new challenges and opens new opportunities. We show how the transformation of distance learning and particularly the introduction of webcasting transform organization of the program and class delivery. We will describe in detail the academic focus of the program, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

Design and Development of High-Repetition-Rate Satellite Laser Ranging System

Science.gov (United States)

Choi, Eun-Jung; Bang, Seong-Cheol; Sung, Ki-Pyoung; Lim, Hyung-Chul; Jung, Chan-Gyu; Kim, In-Yeung; Choi, Jae-Seung

2015-09-01

The Accurate Ranging System for Geodetic Observation ? Mobile (ARGO-M) was successfully developed as the first Korean mobile Satellite Laser Ranging (SLR) system in 2012, and has joined in the International Laser Ranging Service (ILRS) tracking network, DAEdeoK (DAEK) station. The DAEK SLR station was approved as a validated station in April 2014, through the ILRS station ¡°data validation¡± process. The ARGO-M system is designed to enable 2 kHz laser ranging with millimeter-level precision for geodetic, remote sensing, navigation, and experimental satellites equipped with Laser Retroreflector Arrays (LRAs). In this paper, we present the design and development of a next generation high-repetition-rate SLR system for ARGO-M. The laser ranging rate up to 10 kHz is becoming an important issue in the SLR community to improve ranging precision. To implement high-repetition-rate SLR system, the High-repetition-rate SLR operation system (HSLR-10) was designed and developed using ARGO-M Range Gate Generator (A-RGG), so as to enable laser ranging from 50 Hz to 10 kHz. HSLR-10 includes both hardware controlling software and data post-processing software. This paper shows the design and development of key technologies of high-repetition-rate SLR system. The developed system was tested successfully at DAEK station and then moved to Sejong station, a new Korean SLR station, on July 1, 2015. HSLR-10 will begin normal operations at Sejong station in the near future.

Effect of side chain length and degree of polymerization on the decomposition and crystallization behaviour of chlorinated poly(vinyl ester) oligomers

International Nuclear Information System (INIS)

Heinze, D.; Mang, Th.; Popescu, C.; Weichold, O.

2016-01-01

Highlights: • Thermal behaviour of telomerized polyvinyl esters is investigated. • Thermal stability relies mainly on the contribution of side chains. • At equal molecular weights thermal stability is dictated by length of side chain. • Increasing the length of side chains improves also the packing degree of polymer. - Abstract: Four members of a homologous series of chlorinated poly(vinyl ester) oligomers CCl_3–(CH_2CH (OCO(CH_2)_mCH_3))_n–Cl with degrees of polymerization of 10 and 20 were prepared by telomerisation using carbon tetrachloride. The number of side chain carbon atoms ranges from 2 (poly(vinyl acetate) to 18 (poly(vinyl stearate)). The effect of the n-alkyl side chain length and of the degree of polymerization on the thermal stability and crystallization behaviour of the synthesized compounds was investigated. All oligomers degrade in two major steps by first losing HCl and side chains with subsequent breakdown of the backbone. The members with short side chains, up to poly(vinyl octanoate), are amorphous and show internal plasticization, whereas those with high number of side chain carbon atoms are semi-crystalline due to side-chain crystallization. A better packing for poly(vinyl stearate) is also noticeable. The glass transition and melting temperatures as well as the onset temperature of decomposition are influenced to a larger extent by the side chain length than by the degree of polymerization. Thermal stability is improved if both the size and number of side chains increase, but only a long side chain causes a significant increase of the resistance to degradation. This results in a stabilization of PVAc so that oligomers from poly(vinyl octanoate) on are stable under atmospheric conditions. Thus, the way to design stable, chlorinated PVEs oligomers is to use a long n-alkyl side chain.

A Quantitative Risk Assessment Model Involving Frequency and Threat Degree under Line-of-Business Services for Infrastructure of Emerging Sensor Networks.

Science.gov (United States)

Jing, Xu; Hu, Hanwen; Yang, Huijun; Au, Man Ho; Li, Shuqin; Xiong, Naixue; Imran, Muhammad; Vasilakos, Athanasios V

2017-03-21

The prospect of Line-of-Business Services (LoBSs) for infrastructure of Emerging Sensor Networks (ESNs) is exciting. Access control remains a top challenge in this scenario as the service provider's server contains a lot of valuable resources. LoBSs' users are very diverse as they may come from a wide range of locations with vastly different characteristics. Cost of joining could be low and in many cases, intruders are eligible users conducting malicious actions. As a result, user access should be adjusted dynamically. Assessing LoBSs' risk dynamically based on both frequency and threat degree of malicious operations is therefore necessary. In this paper, we proposed a Quantitative Risk Assessment Model (QRAM) involving frequency and threat degree based on value at risk. To quantify the threat degree as an elementary intrusion effort, we amend the influence coefficient of risk indexes in the network security situation assessment model. To quantify threat frequency as intrusion trace effort, we make use of multiple behavior information fusion. Under the influence of intrusion trace, we adapt the historical simulation method of value at risk to dynamically access LoBSs' risk. Simulation based on existing data is used to select appropriate parameters for QRAM. Our simulation results show that the duration influence on elementary intrusion effort is reasonable when the normalized parameter is 1000. Likewise, the time window of intrusion trace and the weight between objective risk and subjective risk can be set to 10 s and 0.5, respectively. While our focus is to develop QRAM for assessing the risk of LoBSs for infrastructure of ESNs dynamically involving frequency and threat degree, we believe it is also appropriate for other scenarios in cloud computing.

A Quantitative Risk Assessment Model Involving Frequency and Threat Degree under Line-of-Business Services for Infrastructure of Emerging Sensor Networks

Science.gov (United States)

Jing, Xu; Hu, Hanwen; Yang, Huijun; Au, Man Ho; Li, Shuqin; Xiong, Naixue; Imran, Muhammad; Vasilakos, Athanasios V.

2017-01-01

The prospect of Line-of-Business Services (LoBSs) for infrastructure of Emerging Sensor Networks (ESNs) is exciting. Access control remains a top challenge in this scenario as the service provider’s server contains a lot of valuable resources. LoBSs’ users are very diverse as they may come from a wide range of locations with vastly different characteristics. Cost of joining could be low and in many cases, intruders are eligible users conducting malicious actions. As a result, user access should be adjusted dynamically. Assessing LoBSs’ risk dynamically based on both frequency and threat degree of malicious operations is therefore necessary. In this paper, we proposed a Quantitative Risk Assessment Model (QRAM) involving frequency and threat degree based on value at risk. To quantify the threat degree as an elementary intrusion effort, we amend the influence coefficient of risk indexes in the network security situation assessment model. To quantify threat frequency as intrusion trace effort, we make use of multiple behavior information fusion. Under the influence of intrusion trace, we adapt the historical simulation method of value at risk to dynamically access LoBSs’ risk. Simulation based on existing data is used to select appropriate parameters for QRAM. Our simulation results show that the duration influence on elementary intrusion effort is reasonable when the normalized parameter is 1000. Likewise, the time window of intrusion trace and the weight between objective risk and subjective risk can be set to 10 s and 0.5, respectively. While our focus is to develop QRAM for assessing the risk of LoBSs for infrastructure of ESNs dynamically involving frequency and threat degree, we believe it is also appropriate for other scenarios in cloud computing. PMID:28335569

Effect of side chain length and degree of polymerization on the decomposition and crystallization behaviour of chlorinated poly(vinyl ester) oligomers

Energy Technology Data Exchange (ETDEWEB)

Heinze, D.; Mang, Th. [Aachen University of Applied Sciences, Heinrich-Mussmann-Str. 1, 52428 Jülich (Germany); Popescu, C., E-mail: crisan.popescu@kao.com [KAO Germany GmbH, Pfungstädterstr. 98-100, 64297 Darmstadt (Germany); Weichold, O., E-mail: weichold@ibac.rwth-aachen.de [Institute of Building Materials Research, Schinkelstr. 3, 52062 Aachen (Germany)

2016-08-10

Highlights: • Thermal behaviour of telomerized polyvinyl esters is investigated. • Thermal stability relies mainly on the contribution of side chains. • At equal molecular weights thermal stability is dictated by length of side chain. • Increasing the length of side chains improves also the packing degree of polymer. - Abstract: Four members of a homologous series of chlorinated poly(vinyl ester) oligomers CCl{sub 3}–(CH{sub 2}CH (OCO(CH{sub 2}){sub m}CH{sub 3})){sub n}–Cl with degrees of polymerization of 10 and 20 were prepared by telomerisation using carbon tetrachloride. The number of side chain carbon atoms ranges from 2 (poly(vinyl acetate) to 18 (poly(vinyl stearate)). The effect of the n-alkyl side chain length and of the degree of polymerization on the thermal stability and crystallization behaviour of the synthesized compounds was investigated. All oligomers degrade in two major steps by first losing HCl and side chains with subsequent breakdown of the backbone. The members with short side chains, up to poly(vinyl octanoate), are amorphous and show internal plasticization, whereas those with high number of side chain carbon atoms are semi-crystalline due to side-chain crystallization. A better packing for poly(vinyl stearate) is also noticeable. The glass transition and melting temperatures as well as the onset temperature of decomposition are influenced to a larger extent by the side chain length than by the degree of polymerization. Thermal stability is improved if both the size and number of side chains increase, but only a long side chain causes a significant increase of the resistance to degradation. This results in a stabilization of PVAc so that oligomers from poly(vinyl octanoate) on are stable under atmospheric conditions. Thus, the way to design stable, chlorinated PVEs oligomers is to use a long n-alkyl side chain.

Learning to play the violin: motor control by freezing, not freeing degrees of freedom.

Science.gov (United States)

Konczak, Jürgen; Vander Velden, Heidi; Jaeger, Lukas

2009-05-01

Playing a violin requires precise patterns of limb coordination that are acquired over years of practice. In the present study, the authors investigated how motion at proximal arm joints influenced the precision of bow movements in novice learners and experts. The authors evaluated the performances of 11 children (4-12 years old), 3 beginning-to-advanced level adult players, and 2 adult concert violinists, using a musical work that all had mastered as their first violin piece. The authors found that learning to play the violin was not associated with a release or freeing of joint degrees of freedom. Instead, learning was characterized by an experience-dependent suppression of sagittal shoulder motion, as documented by an observed reduction in joint angular amplitude. This reduction in the amplitude of shoulder flexion-extension correlated highly with a decrease of bow-movement variability. The remaining mechanical degrees of freedom at the elbow and shoulder showed patterns of neither suppression nor freeing. Only violinists with more than 700 practice hr achieved sagittal shoulder range of motion comparable to experts. The findings imply that restricting joint amplitude at selected joint degrees of freedom, while leaving other degrees of freedom unconstrained, constitutes an appropriate strategy for learning complex, high-precision motor patterns in children and adults. The findings also highlight that mastering even seemingly simple bowing movements constitutes a prolonged learning process.

How Much Does It Cost Institutions to Produce Stem Degrees? Data Brief. The Price and Cost of Science Degrees Series

Science.gov (United States)

Delta Cost Project at American Institutes for Research, 2013

2013-01-01

This AIR Data Brief breaks down the "cost per degree" estimates for 28 disciplines, including those in the STEM fields, which among the most expensive degrees to produce. The brief points to ways colleges can change their tuition structure to finance STEM degrees more affordably. This data brief is the fourth of four in the series. (See…

The compositional dependence of irradiation creep of austenitic alloys irradiated in PFR at 420{degrees}C

Energy Technology Data Exchange (ETDEWEB)

Toloczko, M.B.; Garner, F.A. [Pacific Northwest National Lab., Richland, WA (United States); Munro, B. [AEA Technology, Dounreay (United Kingdom)] [and others

1997-04-01

Irradiation creep data are expensive and often difficult to obtain, especially when compared to swelling data. This requires that maximum use be made of available data sources in order to elucidate the parametric dependencies of irradiation creep for application to new alloys and to new environments such as those of proposed fusion environments. One previously untapped source of creep data is that of a joint U.S./U.K. experiment conducted in the Prototype Fast Reactor (PFR) in Dounreay, Scotland. In this experiment, five austenitic steels were irradiated in a variety of starting conditions. In particular, these steels spanned a large range (15-40%) of nickel contents, and contained strong variations in Mo, Ti, Al, and Nb. Some alloys were solution-strengthened and some were precipitation-strengthened. Several were cold-worked. These previously unanalyzed data show that at 420{degrees}C all austenitic steels have a creep compliance that is roughly independent of the composition of the steel at 2{+-}1 x 10{sup {minus}6}MPa{sup {minus}1} dpa{sup {minus}1}. The variation within this range may arise from the inability to completely separate the non-creep strains arising from precipitation reactions and the stress-enhancement of swelling. Each of these can be very sensitive to the composition and starting treatment of a steel.

PROBABILISTIC MODEL OF LASER RANGE FINDER FOR THREE DIMENSIONAL GRID CELL IN CLOSE RANGE ENVIRONMENT

Directory of Open Access Journals (Sweden)

Hafiz b Iman

2016-04-01

Full Text Available The probabilistic model of a laser scanner presents an important aspect for simultaneous localization and map-building (SLAM. However, the characteristic of the beam of the laser range finder under extreme incident angles approaching 900 has not been thoroughly investigated. This research paper reports the characteristic of the density of the range value coming from a laser range finder under close range circumstances where the laser is imposed with a high incident angle. The laser was placed in a controlled environment consisting of walls at a close range and 1000 iteration of scans was collected. The assumption of normal density of the metrical data collapses when the beam traverses across sharp edges in this environment. The data collected also shows multimodal density at instances where the range has discontinuity. The standard deviation of the laser range finder is reported to average at 10.54 mm, with 0.96 of accuracy. This significance suggests that under extreme incident angles, a laser range finder reading behaves differently compared to normal distribution. The use of this information is crucial for SLAM activity in enclosed environments such as inside piping grid or other cluttered environments.KEYWORDS:   Hokuyo UTM-30LX; kernel density estimation; probabilistic model  

Characteristics of regents college nontraditional nuclear technology degrees

International Nuclear Information System (INIS)

DeSain, G.W.

1989-01-01

In 1971, the Board of Regents of The University of The State of New York created Regents College Degrees to assess academic knowledge of working adults and award college degrees based on demonstrated knowledge rather than time spent in a college classroom. It was founded on a basic premise that seemed radical to some but which is now widely accepted: What a person knows is more important than how or where that knowledge was acquired. Regents College degrees, therefore, are a different concept of a college: one that is an assessing institution rather than a teaching institution. It has no campus and offers no courses. Students can combine college credits from a variety of different sources int an accredited degree program. Staff and faculty evaluate that credit according to the requirements of the particular degree program. When all requirements are met, the Board or Regents of The University of The State of New York confers the degree

Study of the double charge-changing collision cross-sections of H+, D+, Li+ ions with organic molecules in the energy range 10-50 keV

International Nuclear Information System (INIS)

Farrokhi, S.

1966-01-01

The variation of the double charge-changing collision cross-sections of H + , D + , Li + ions with organic molecules (CH 4 , C 2 H 6 , C 3 H 8 , C 4 H 10 ) in the energy range 10-50 keV has been studied. Several maximums for σ 1-1 = f(E) have been shown. Their existence should be explained by the different possibilities of dissociating the target-molecules. The position of the maximums, for the H + → H - and D + → D - reactions is in good agreement with that defined by the Massey adiabatic relation. (author) [fr

Semi-empirical calculations for the ranges of fast ions in silicon

Science.gov (United States)

Belkova, Yu. A.; Teplova, Ya. A.

2018-04-01

A semi-empirical method is proposed to calculate the ion ranges in energy region E = 0.025-10 MeV/nucleon. The dependence of ion ranges on the projectile nuclear charge, mass and velocity is analysed. The calculations presented for ranges of ions with nuclear charges Z = 2-10 in silicon are compared with SRIM results and experimental data.

Novel electrochemical method for the characterization of the degree of chirality in chiral polyaniline.

Science.gov (United States)

Feng, Zhang; Li, Ma; Yan, Yang; Jihai, Tang; Xiao, Li; Wanglin, Li

2013-01-01

A novel method to indicate the degree of chirality in polyaniline (PANI) was developed. The (D-camphorsulfonic acid)- and (HCl)-PANI-based electrodes exhibited significantly different electrochemical performances in D- and L-Alanine (Ala) aqueous solution, respectively, which can be used for the characterization the optical activity of chiral PANI. Cyclic voltammogram, tafel, and open circuit potential of PANI-based electrodes were measured within D- and L-Ala electrolyte solution, respectively. The open circuit potentials under different reacting conditions were analyzed by Doblhofer model formula, in which [C(+)](poly1)/[C(+)](poly2) was used as a parameter to characterize the degree of chirality in chiral PANI. The results showed that [C(+)](poly1)/[C(+)](poly2) can be increased with increasing concentrations of (1S)-(+)- and (1R)-(-)-10-camphorsulfonic acid. In addition, we detected that appropriate response time and lower temperature are necessary to improve the degree of chirality. Copyright © 2012 Wiley Periodicals, Inc.

Characterisation of a monolithic active pixel sensor for electron detection in the energy range 10-20 keV

International Nuclear Information System (INIS)

Matheson, J.; Moldovan, G.; Clark, A.; Prydderch, M.; Turchetta, R.; Derbyshire, G.; Kirkland, A.; Allinson, N.

2009-01-01

As part of a feasibility study into the use of novel electron detectors for X-ray photoelectron emission microscopes (XPEEM), we have characterised the imaging performance of a back-illuminated monolithic active pixel sensor (MAPS) operating under both integrating and counting modes for electrons in the energy range 10-20 keV. For integrating mode, we present the detective quantum efficiency (DQE), which shows marked improvements over conventional indirect detectors based on microchannel plates. We also present the modulation transfer function (MTF) and noise power spectrum (NPS), again demonstrating significantly improved performance. For counting mode, we present the quantum efficiency (QE) as a function of incident electron energy. We have evaluated the charge collection efficiency (CCE) and we thereby demonstrate the presence of a ∼200 nm thick dead layer that is linked with reduced CCE at low electron energies. Based on our findings, we believe that the MAPS technology is well matched to future XPEEM instruments using aberration correction.

The design concept of the 6-degree-of-freedom hydraulic shaker at ESTEC

Science.gov (United States)

Brinkman, P. W.; Kretz, D.

1992-01-01

The European Space Agency (ESA) has decided to extend its test facilities at the European Space and Technology Center (ESTEC) at Noordwijk, The Netherlands, by implementing a 6-degree-of-freedom hydraulic shaker. This shaker will permit vibration testing of large payloads in the frequency range from 0.1 Hz to 100 Hz. Conventional single axis sine and random vibration modes can be applied without the need for a configuration change of the test set-up for vertical and lateral excitations. Transients occurring during launch and/or landing of space vehicles can be accurately simulated in 6-degrees-of-freedom. The performance requirements of the shaker are outlined and the results of the various trade-offs, which are investigated during the initial phase of the design and engineering program are provided. Finally, the resulting baseline concept and the anticipated implementation plan of the new test facility are presented.

Design, implementation, and application of 150-degree commutation VSI to improve speed range of sensored BLDC motor.

Science.gov (United States)

Ozgenel, Mehmet Cihat

2017-09-01

Permanent magnet brushless dc (BLDC) motors are very convenient for many applications such as industrial, medical, robotic, aerospace, small electric vehicles, and home applications because of their inherent satisfying dynamic characteristics. There are numerous studies about these motors and their control schemes such as sensorless control and different speed and torque control schemes. All electric motors need commutation in order to produce speed and torque. Commutation in brushed DC motors is performed by means of a brush and collector. In BLDC motors, commutation is provided electronically in contrast to the brushed dc motors. In BLDC motors, motor phase windings are energized according to the information of the rotor position by inverter transistors. Rotor position information is used for commutation. Therefore, rotor position information is required to produce speed and torque for BLDC motors. The easiest and cheapest way to obtain rotor position information is to use Hall-effect or optical sensors. BLDC motor manufacturers generally produce BLDC motors equipped with three Hall-effect position sensors. Having three position sensors on BLDC motors provides six-step commutation which ensures two phase windings are energized in each moment. The third phase is empty. In this study, all phase windings are energized in the same time. This commutation method is twelve-step or 150 degrees commutation. So that more speed can be achieved from the same BLDC motor by comparison with six-step commutation. In this paper, both six-step and twelve-step commutation methods applied to the same BLDC motor and obtained experimental results from this study were presented, examined, and discussed.

Design, implementation, and application of 150-degree commutation VSI to improve speed range of sensored BLDC motor

Science.gov (United States)

Ozgenel, Mehmet Cihat

2017-09-01

Permanent magnet brushless dc (BLDC) motors are very convenient for many applications such as industrial, medical, robotic, aerospace, small electric vehicles, and home applications because of their inherent satisfying dynamic characteristics. There are numerous studies about these motors and their control schemes such as sensorless control and different speed and torque control schemes. All electric motors need commutation in order to produce speed and torque. Commutation in brushed DC motors is performed by means of a brush and collector. In BLDC motors, commutation is provided electronically in contrast to the brushed dc motors. In BLDC motors, motor phase windings are energized according to the information of the rotor position by inverter transistors. Rotor position information is used for commutation. Therefore, rotor position information is required to produce speed and torque for BLDC motors. The easiest and cheapest way to obtain rotor position information is to use Hall-effect or optical sensors. BLDC motor manufacturers generally produce BLDC motors equipped with three Hall-effect position sensors. Having three position sensors on BLDC motors provides six-step commutation which ensures two phase windings are energized in each moment. The third phase is empty. In this study, all phase windings are energized in the same time. This commutation method is twelve-step or 150 degrees commutation. So that more speed can be achieved from the same BLDC motor by comparison with six-step commutation. In this paper, both six-step and twelve-step commutation methods applied to the same BLDC motor and obtained experimental results from this study were presented, examined, and discussed.

Creep strength of 10 CrMo 9 10 welding material

International Nuclear Information System (INIS)

Maile, K.; Theofel, H.

1993-01-01

Samples from different welding materials of the heat-resistant steel 10 Cr Mo 10 were subjected to creep tests. The maximum duration of stressing was 36,000 hours. At a text temperature of 450 C, the creep behaviour is considerably affected by different initial strengths. At 500 and 550 C, the creep fracture points for most of the welding materials in the long term range lie scattered in a relatively narrow band. This range is at or just below the lower scatteer band limit of the basic material (corresponding to DIN 17175, mean value ± 20%. (orig.) [de

Injection sclerotherapy versus rubber band ligation for second degree hemorrhoids

International Nuclear Information System (INIS)

Nasir, M.A.; Masroor, R.; Arfar, Y.; Sarwar, S.; Butt, Q.

2017-01-01

Objective: To compare the efficacy of injections Sclerotherapy (IST) and rubber band ligation (RBL) for the treatment of 2nd degree haemorrhoids in terms of improvement in symptoms severity score (SS score) in OPD patients. Study Design: Randomized controlled trial. Place and Duration of Study: It was conducted in surgical OPD of CMH Kohat, from 15th October 2010 to 10th April 2011 Material and Methods: A total of 116 patients with symptomatic 2nd degree haemorrhoids were randomly divided into two groups, RBL and IST (58 patients each) respectively and a baseline symptoms severity score was noted for each patient. Patients in RBL group were treated with RBL while in IST group were treated with IST. The outcome measures were relief of symptoms and improvement in SS score. Results: In RBL group, baseline SS score was 4.67 +- 2.01 which reduced to final mean SS score of 1.34 +- 0.96 whereas in IST group the baseline SS score was of 4.31 +- 2.13 which reduced to a final mean SS score of 1.6 +- 0.97. 44 (75.95%) patients had complete recovery and control of bleeding in RBL group; whereas in IST group 32 (55.1%) of the patients had this response by the end of two weeks. Conclusion: Rubber band ligation was found to have better patient outcomes as compared to injections sclerotherapy in treatment of 2nd degree hemorrhoids. (author)

Precipitation of Nd-Ca carbonate solid solution at 25 degrees C

International Nuclear Information System (INIS)

Carroll, S.A.

1993-01-01

The formation of a Nd-Ca carbonate solid solution was studied by monitoring the reactions of calcite with aqueous Nd, orthorhombic NdOHCO 3 (s) with aqueous Ca, and calcite with hexagonal Nd-carbonate solid phase as a function of time at 25 degrees C and controlled pCO 2 (g). All experiments reached steady state after 200 h of reaction. The dominant mechanism controlling the formation of the solid solution was precipitation of a Nd-Ca carbonate phase from the bulk solution as individual crystals or at the orthorhombic NdOHCO 3 (s)-solution interface. The lack of Nd adsorption or solid solution at the calcite-solution interface suggests that the solid solution was orthorhombic and may be modeled as a mixture of orthorhombic NdOHCO 3 (s) and aragonite. Orthorhombic NdOHCO 3 (s) was determined to be the stable Nd-carbonate phase in the Nd-CO 2 -H 2 O system at pCO 2 (g) 0.1 atmospheres at 25 degrees C. The equilibrium constant corrected to zero ionic strength for orthorhombic NdOHCO 3 (s) solubility is 10 10.41(±0.29) for the following: NdOHCO 3 (s) + 3H + = Nd 3+ + CO 2 (g) + H 2 O. Results are discussed in relation to radioactive waste disposal by burial, and specifically in relation to americium chemistry

Asthma and PM10

Directory of Open Access Journals (Sweden)

Gilmour M Ian

2000-07-01

Full Text Available Abstract PM10 (the mass of particles present in the air having a 50% cutoff for particles with an aerodynamic diameter of 10 μm is the standard measure of particulate air pollution used worldwide. Epidemiological studies suggest that asthma symptoms can be worsened by increases in the levels of PM10. Epidemiological evidence at present indicates that PM10 increases do not raise the chances of initial sensitisation and induction of disease, although further research is warranted. PM10 is a complex mixture of particle types and has many components and there is no general agreement regarding which component(s could lead to exacerbations of asthma. However pro-inflammatory effects of transition metals, hydrocarbons, ultrafine particles and endotoxin, all present to varying degrees in PM10, could be important. An understanding of the role of the different components of PM10 in exacerbating asthma is essential before proper risk assessment can be undertaken leading to advice on risk management for the many asthmatics who are exposed to air pollution particles.

Nuclear Engineering Enrollments and Degrees Survey, 2005 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2006-01-01

This annual report details the number of nuclear engineering bachelor's, master's, and doctoral degrees awarded at a sampling of academic programs from 1998-2005. it also looks at nuclear engineering degrees by curriculum and the number of students enrolled in nuclear engineering degree programs at 30 U.S. universities in 2005

Scholarship in nursing: Degree-prepared nurses versus diploma ...

African Journals Online (AJOL)

All but one (n = 18) nursing educators who obtained a degree as first qualification are educators in the private sector that include both universities as well as nursing colleges of private hospital groups. Data further revealed that most nurse educators and those in managerial positions were degree prepared. More degree ...

Degree-regular triangulations of torus and Klein bottle

Indian Academy of Sciences (India)

Home; Journals; Proceedings – Mathematical Sciences; Volume 115; Issue 3 ... A triangulation of a connected closed surface is called degree-regular if each of its vertices have the same degree. ... In [5], Datta and Nilakantan have classified all the degree-regular triangulations of closed surfaces on at most 11 vertices.

Health Physics Enrollments and Degrees Survey, 2005 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2006-01-01

This annual report details the number of health physics bachelor's, master's, and postdoctoral degrees awarded at a sampling of academic programs from 1998-2005. It also looks at health physics degrees by curriculum and the number of students enrolled in health physics degree programs at 30 U.S. universities in 2005

Health Physics Enrollments and Degrees Survey, 2004 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2005-01-01

This annual report details the number of health physics bachelor's, master's, and doctoral degrees awarded at a sampling of academic programs from 1998-2004. It also looks at health physics degrees by curriculum and the number of students enrolled in health physics degree programs at 28 U.S. universities in 2004

Measurement of excitation yields of low energy prompt γ-ray from proton bombardment of Cr-foils with energies ranging between 1.0 and 3.0 MeV

International Nuclear Information System (INIS)

Goncharov, A.

2014-01-01

The goal of this work is measurement of differential cross sections for the production of 378 keV γ-rays from the reactions 52 Cr(p,γ1) 53 Mn and 53 Cr(p,nγ1) 53 Mn for proton energies ranging between 1.0 and 3.0 MeV at the laboratory angle of 90° using foils with thickness ∼1.9×10 18 at/cm 2 (∼ 0.23 μm) of nat Cr.

Precise determination of the degree of polarization of a cold neutron beam

International Nuclear Information System (INIS)

Nastoll, H.; Schreckenbach, K.; Baglin, C.; Bussiere, A.; Guillaud, J.P.; Kossakowski, R.; Liaud, P.

1991-01-01

A cold neutron beam at the ILL High Flux Reactor was used to produce highly polarized neutrons by means of a bent supermirror polarizer. A following current sheet spin flipper allowed the change of the neutron spin direction relative to the guiding magnetic fields. The degree of polarization of the beam was measured as a function of the neutron velocity in the range 300-1500 m/s achieving an accuracy of 0.2% at typically 98% polarization. Two spin flippers and the permutation of three supermirror polarizers as polarizer/analyzer were employed. (orig.)

Assessment of degree of hydration in dialysis patients using whole body and calf bioimpedance analysis

Science.gov (United States)

Zhu, F.; Kotanko, P.; Handelman, G. J.; Raimann, J.; Liu, L.; Carter, M.; Kuhlmann, M. K.; Siebert, E.; Leonard, E. F.; Levin, N. W.

2010-04-01

Prescription of an appropriate post hemodialysis (HD) dialysis target weight requires accurate evaluation of the degree of hydration. The aim of this study was to investigate whether a state of normal hydration as defined by calf bioimpedance spectroscopy (cBIS) could be characterized in HD and normal subjects (NS). cBIS was performed in 62 NS (33 m/29 f) and 30 HD patients (16 m /14 f) pre- and post-dialysis to measure extracellular resistance. Normalized calf resistivity at 5 kHz (ρN,5) was defined as resistivity divided by body mass index. Measurements were made at baseline (BL) and at a state of normal hydration (NH) established following the progressive reduction of post-HD weight over successive dialysis treatments until the ρN,5 was in the range of NS. Blood pressures were measured pre- and post-HD treatment. ρN,5 in males and females differed significantly in NS (20.5±1.99 vs 21.7±2.6 10-2 Ωm3/kg, p>0.05). In patients, ρN,5 notably increased and reached NH range due to progressive decrease in body weight, and systolic blood pressure (SBP) significantly decreased pre- and post-HD between BL and NBH respectively. This establishes the use of ρN,5 as a new comparator allowing the clinician to incrementally monitor the effect of removal of extracellular fluid from patients over a course of dialysis treatments.

Method of taking into account the meson and quark-gluon degrees of freedom in hadron-hadron interactions at low and intermediate energies. Application to NN scattering

International Nuclear Information System (INIS)

Safronov, A.N.

1983-01-01

A system of nonsingular integral equations is formulated for calculation of the partial-wave amplitudes of hadron-hadron scattering in the region of low and intermediate energies with allowance for the meson and quark-gluon degrees of freedom. The quark-gluon degrees of freedom are taken into account in the framework of the model of composite quark bags, and the meson degrees of freedom by the methods of relativistic quantum field theory. It is shown that inclusion of the quark-gluon degrees of freedom leads to suppression of meson exchange effects, for the most part exchanges of heavy mesons (rho,ω). The method is applied to the calculation of the 3 S 1 , 1 S 0 , 3 P 0 , 3 P 1 , and 1 P 1 phase shifts of nucleon-nucleon scattering in the range of incident-nucleon energies T = 0--1050 MeV, as well as the S-wave scattering lengths and effective ranges

High-Degree Neurons Feed Cortical Computations.

Directory of Open Access Journals (Sweden)

Nicholas M Timme

2016-05-01

Full Text Available Recent work has shown that functional connectivity among cortical neurons is highly varied, with a small percentage of neurons having many more connections than others. Also, recent theoretical developments now make it possible to quantify how neurons modify information from the connections they receive. Therefore, it is now possible to investigate how information modification, or computation, depends on the number of connections a neuron receives (in-degree or sends out (out-degree. To do this, we recorded the simultaneous spiking activity of hundreds of neurons in cortico-hippocampal slice cultures using a high-density 512-electrode array. This preparation and recording method combination produced large numbers of neurons recorded at temporal and spatial resolutions that are not currently available in any in vivo recording system. We utilized transfer entropy (a well-established method for detecting linear and nonlinear interactions in time series and the partial information decomposition (a powerful, recently developed tool for dissecting multivariate information processing into distinct parts to quantify computation between neurons where information flows converged. We found that computations did not occur equally in all neurons throughout the networks. Surprisingly, neurons that computed large amounts of information tended to receive connections from high out-degree neurons. However, the in-degree of a neuron was not related to the amount of information it computed. To gain insight into these findings, we developed a simple feedforward network model. We found that a degree-modified Hebbian wiring rule best reproduced the pattern of computation and degree correlation results seen in the real data. Interestingly, this rule also maximized signal propagation in the presence of network-wide correlations, suggesting a mechanism by which cortex could deal with common random background input. These are the first results to show that the extent to

Isokinetic and isometric strength-endurance after 6 hours of immersion and 6 degrees head-down tilt in men

Science.gov (United States)

Shaffer-Bailey, M.; Greenleaf, J. E.; Hutchinson, T. M.

1996-01-01

PURPOSE: To determine weight (water) loss levels for onset of muscular strength and endurance changes during deconditioning. METHODS: Seven men (27-40 yr) performed maximal shoulder-, knee-, and ankle-joint isometric (0 degree.s(-1) load) and isokinetic (60 degrees, 120 degrees, 180 degrees.s(-1) velocity) exercise tests during ambulatory control (AC), after 6 h of 6 degrees head-down tilt (HDT; dry-bulb temp. = 23.2 +/- SD 0.6 degrees C, relative humidity = 31.1+/- 11.1%) and after 6 h of 80 degrees foot-down head-out water immersion (WI; water temp. = 35.0 +/- SD 0.1 degree C) treatments. RESULTS: Weight (water) loss after HDT (1.10 +/- SE 0.14 kg, 1.4 +/- 0.2% body wt) and WI (1.54+/- 0.19 kg, 2.0 +/- 0.2% body wt) were not different, but urinary excretion with WI (1,354 +/- 142 ml.6 h(-1)) was 28% greater (p strength was unchanged except for three knee-joint peak torques: AC torque (120 degrees.s(-1), 285 +/- 20 Nm) decreased to 268 +/- 21 Nm (delta = -6%, p strength and endurance decrements is more than 2% body weight (water) loss, while significant reduction in knee-joint muscular strength-endurance occurred only at moderate (120 degrees.s(-1) and lighter (180 degrees.s(-1)) loads with body weight loss of 1.4-2.0% following WI or HDT, respectively. These weight (water) losses and knee-joint strength decrements are somewhat less than the mean weight loss of 2.6% and knee-joint strength decrements of 6-20% of American astronauts after Skylab flights to 84 d.

[Range of Hip Joint Motion and Weight of Lower Limb Function under 3D Dynamic Marker].

Science.gov (United States)

Xia, Q; Zhang, M; Gao, D; Xia, W T

2017-12-01

To explore the range of reasonable weight coefficient of hip joint in lower limb function. When the hip joints of healthy volunteers under normal conditions or fixed at three different positions including functional, flexed and extension positions, the movements of lower limbs were recorded by LUKOtronic motion capture and analysis system. The degree of lower limb function loss was calculated using Fugl-Meyer lower limb function assessment form when the hip joints were fixed at the aforementioned positions. One-way analysis of variance and Tamhane's T2 method were used to proceed statistics analysis and calculate the range of reasonable weight coefficient of hip joint. There were significant differences between the degree of lower limb function loss when the hip joints fixed at flexed and extension positions and at functional position. While the differences between the degree of lower limb function loss when the hip joints fixed at flexed position and extension position had no statistical significance. In 95% confidence interval, the reasonable weight coefficient of hip joint in lower limb function was between 61.05% and 73.34%. Expect confirming the reasonable weight coefficient, the effects of functional and non-functional positions on the degree of lower limb function loss should also be considered for the assessment of hip joint function loss. Copyright© by the Editorial Department of Journal of Forensic Medicine

Range and energetics of charge hopping in organic semiconductors

Science.gov (United States)

Abdalla, Hassan; Zuo, Guangzheng; Kemerink, Martijn

2017-12-01

The recent upswing in attention for the thermoelectric properties of organic semiconductors (OSCs) adds urgency to the need for a quantitative description of the range and energetics of hopping transport in organic semiconductors under relevant circumstances, i.e., around room temperature (RT). In particular, the degree to which hops beyond the nearest neighbor must be accounted for at RT is still largely unknown. Here, measurements of charge and energy transport in doped OSCs are combined with analytical modeling to reach the univocal conclusion that variable-range hopping is the proper description in a large class of disordered OSC at RT. To obtain quantitative agreement with experiment, one needs to account for the modification of the density of states by ionized dopants. These Coulomb interactions give rise to a deep tail of trap states that is independent of the material's initial energetic disorder. Insertion of this effect into a classical Mott-type variable-range hopping model allows one to give a quantitative description of temperature-dependent conductivity and thermopower measurements on a wide range of disordered OSCs. In particular, the model explains the commonly observed quasiuniversal power-law relation between the Seebeck coefficient and the conductivity.

Astronomy Enrollments and Degrees: Results from the 2009 & 2010 Surveys of Physics & Astronomy Enrollments and Degrees. Focus On

Science.gov (United States)

Nicholson, Starr; Mulvey, Patrick

2011-01-01

The Statistical Research Center of the American Institute of Physics conducts an annual census from October through February of all departments that offer degrees in astronomy (78) in the United States. Astronomy departments consist of stand-alone degree-granting departments (39) and departments that are administered along with a physics program…

High accuracy measurement of the $^{235}$U(n,f) reaction cross-section in the 10-30 keV neutron energy range

CERN Multimedia

The analysis of the neutron flux of n_TOF (in EAR1) revealed an anomaly in the 10-30 keV neutron energy range. While the flux extracted on the basis of the $^{6}$Li(n,t)$^{4}$He and $^{10}$B(n,$\\alpha$)$^{7}$Li reactions mostly agreed with each other and with the results of FLUKA simulations of the neutron beam, the one based on the $^{235}$U(n,f) reaction was found to be systematically lower, independently of the detection system used. A possible explanation is that the $^{235}$U(n,f) crosssection in that energy region, where in principle should be known with an uncertainty of 1%, may be systematically overestimated. Such a finding, which has a negligible influence on thermal reactors, would be important for future fast critical or subcritical reactors. Furthermore, its interest is more general, since the $^{235}$U(n,f) reaction is often used at that energy to determine the neutron flux, or as reference in measurements of fission cross section of other actinides. We propose to perform a high-accuracy, high-r...

Capillariidae eggs found in the urine of a free ranging maned wolf from Argentina.

Science.gov (United States)

Beldomenico, Pablo Martín; Hunzicker, Daniel; Lopez Taverna, Julio; Rejf, Paula K

2002-06-01

The first finding of a Capillariid in the urinary tract of a free ranging maned wolf (Chrysocyon brachyurus) is described. The individual was an adult male attacked by dogs in the locality of Cayastacito (Santa Fe, Argentina, 31 degrees 05' S, 60 degrees 34' W). Eggs found in urine measured 64.6-66.9 micrometer (mean 65.4 micrometer) x 26.9-31 micrometer (mean 29 micrometer). Further studies are needed to determine whether this finding corresponds to a new Capillariid species, related to C. brachyurus, or it is an already described species that has been introduced by domestic dogs.

Normal range of gastric emptying in children

International Nuclear Information System (INIS)

Thomas, P.; Collins, C.; Francis, L.; Henry, R.; O'Loughlin, E.; John Hunter Children's Hospital, Newcastle, NSW

1999-01-01

Full text: As part of a larger study looking at gastric emptying times in cystic fibrosis, we assessed the normal range of gastric emptying in a control group of children. Thirteen children (8 girls, 5 boys) aged 4-15 years (mean 10) were studied. Excluded were children with a history of relevant gastrointestinal medical or surgical disease, egg allergy or medication affecting gastric emptying. Imaging was performed at 08.00 h after an overnight fast. The test meal was consumed in under 15 min and comprised one 50 g egg, 80 g commercial pancake mix, 10 ml of polyunsaturated oil, 40 ml of water and 30 g of jam. The meal was labelled with 99 Tc m -macroaggregates of albumin. Water (150 ml) was also consumed with the test meal. One minute images of 128 x 128 were acquired over the anterior and posterior projections every 5 min for 30 min, then every 15 min until 90 min with a final image at 120 min. Subjects remained supine for the first 60 min, after which they were allowed to walk around. A time-activity curve was generated using the geometric mean of anterior and posterior activity. The half emptying time ranged from 55 to 107 min (mean 79, ± 2 standard deviations 43-115). Lag time (time for 5% to leave stomach) ranged from 2 to 26 min (mean 10). The percent emptied at 60 min ranged from 47 to 73% (mean 63%). There was no correlation of half emptying time with age. The normal reference range for a test meal of pancakes has been established for 13 normal children

SEM-EDS and XRD study of a NiCrAlU alloy at temperatures from 800 celsius degree to 1300 celsius degree

International Nuclear Information System (INIS)

Al-Badairy, H.; Fox, P.

2004-01-01

Full text.The oxidation behaviour of a 74.5wt%Ni, 20wt%Cr, 5wt%Al and 0.5wt%U alloy was examined using Scanning Electron Microscopy with X-ray Energy Dispersive Spectroscopy (SEM-EDS) and X-ray Diffractometry (XRD). The oxidation temperature ranged from 800 to 1300 celsius degree in laboratory air with oxidation times up to 120h. Analysis showed that during short term oxidation (40h) at the lower temperatures there was evidence of the formation of Cr, Ni and Al oxides. With increasing oxidation time, the Cr-rich oxide became predominant with the presence of islands of Ni-rich oxide, but no uranium was detected at the outermost layer of the scale. The scale was of flat topography with spallation occurring after 40h oxidation at 900 celsius degree and increasing with increasing temperature and time. Cross-sectional investigations indicated the presence of an internal oxidation zone comprising an Al-rich oxide beneath the outer Cr-rich scale with significant amounts of uranium. The depth of this zone varied from 1 micron to 60 microns and increased with increasing the oxidation temperature and time. At higher temperatures (above 1000 celsius degree), the internal oxidation zone ceased to grow due to the formation of a complete layer of alumina which protected the metal substrate from further degradation. The constituents of the scales formed reflect the selective oxidation of Cr and Al as a result of the higher reactivity of aluminium and chromium compared to nickel and the greater stability of Al 2 O 3 and Cr 2 O 3 compared to NiO. This study showed that Al-rich oxide was not the predominant protective oxide and the presence of uranium was restricted to the grain boundaries of the metal substrate and to within the internal oxidation zone. It appeared that the Cr-rich scale formed on this alloy does not to convolute. This may be due to the influence of uranium since Cr-rich scales forming on NiCrAl containing no uranium are often convoluted

In-medium short-range dynamics of nucleons: Recent theoretical and experimental advances

Energy Technology Data Exchange (ETDEWEB)

Atti, Claudio Ciofi degli, E-mail: ciofi@pg.infn.it

2015-08-14

The investigation of in-medium short-range dynamics of nucleons, usually referred to as the study of short-range correlations (SRCs), is a key issue in nuclear and hadronic physics. As a matter of fact, even in the simplified assumption that the nucleus could be described as a system of protons and neutrons interacting via effective nucleon–nucleon (NN) interactions, several non trivial problems arise concerning the description of in-medium (NN short-range dynamics, namely: (i) the behavior of the NN interaction at short inter-nucleon distances in medium cannot be uniquely constrained by the experimental NN scattering phase shifts due to off-shell effects; (ii) by rigorous renormalization group (RG) techniques entire families of phase equivalent interactions differing in the short-range part can be derived; (iii) the in-medium NN interaction may be, in principle, different from the free one; (iv) when the short inter-nucleon separation is of the order of the nucleon size, the question arises of possible effects from quark and gluon degrees of freedom. For more than fifty years, experimental evidence of SRCs has been searched by means of various kinds of nuclear reactions, without however convincing results, mainly because the effects of SRCs arise from non observable quantities, like, e.g., the momentum distributions, and have been extracted from observable cross sections where short- and long-range effects, effects from nucleonic and non nucleonic degrees of freedom, and effects from final state interaction, could not be unambiguously separated out. Recent years, however, were witness of new progress in the field: from one side, theoretical and computational progress has allowed one to solve ab initio the many-nucleon non relativistic Schrödinger equation in terms of realistic NN interactions, obtaining realistic microscopic wave functions, unless the case of parametrized wave functions used frequently in the past, moreover the development of advanced

Fracture toughness determination of the pressure vessel steel A508 Cl 2 between 100 and 350 degree C

International Nuclear Information System (INIS)

Rao, S.

1980-09-01

The fracture toughness of the pressure vessel steel A508 was determined in the temperature range 100 - 350 degree C. The J-integral method with crack growth resistance curves, the so-called R-curves, was used. The results show that the steel does not have an 'upper-shelf' and the fracture toughness, K sub (JC), decreases with increasing temperature to a minimum around 300 degree C and an increase above it. These results are compared to those obtained previously on an other pressure vessel steel A533B which has essentially the same temperature dependence. The results were also analysed using the Tearing modulus, T. The conclusion iw that the crack growth resistance and the crack initiation resistance (K sub (JC)) show a significant decrease around the operating temperatures as compared to 100 degree C. (author)

Spatial structure determination of ({radical}3 x {radical}3)R30{degrees} and (1.5 x 1.5)R18{degrees}CO on Cu(111) using angle-resolved photoemission extended fine structure

Energy Technology Data Exchange (ETDEWEB)

Moler, E.J.; Kellar, S.A.; Huff, W.R.A. [Lawrence Berkeley National Lab., CA (United States)] [and others

1997-04-01

The authors report a study of the spatial structure of ({radical}3 x {radical}3)R30{degrees} (low coverage) and (1.5 x 1.5)R18{degrees} (intermediate coverage) CO adsorbed on Cu(111), using the Angle-Resolved Photoemission Extended Fine Structure (ARPEFS) technique at beamline 9.3.2 at the Advanced Light Source. The CO molecule adsorbs on an atop site for both adsorption phases. Full multiple-scattering spherical-wave (MSSW) calculations were used to extract the C-Cu. bond length and the first Cu-Cu layer spacing for each adsorption phase. The authors find that the C-Cu bond length remains unchanged with increasing coverage, but the 1st Cu-Cu layer spacing contracts at the intermediate coverage. They calculate the bending mode force constant in the (1.5 x 1.5)R18{degrees} phase to be K{sub {delta}} = 2.2 (1) x 10{sup {minus}12} dyne-cm/rad from their experimentally determined bond lengths combined with previously published infra-red absorption frequencies.

Rotary balance data for a typical single-engine general aviation design for an angle-of-attack range of 8 degrees to 35 degrees, 3. Effect of wing leading-edge modifications, model A

Science.gov (United States)

Bihrle, W., Jr.; Mulcay, W.

1979-01-01

Aerodynamic characteristics obtained in a rotational flow environment utilizing a rotary balance located in the Langley spin tunnel are presented in plotted form for a 1/5 scale, single-engine, low-wing, general aviation airplane model. The configurations tested included the basic airplane, sixteen wing leading-edge modifications and lateral-directional control settings. Data are presented for all configurations without analysis for an angle of attack range of 8 deg to 35 deg and clockwise and counter-clockwise rotations covering an Omega b/2v range from 0 to 0.85. Also, data are presented above 35 deg of attack for some configurations.

P.F.C Sigma® cruciate retaining fixed-bearing versus mobile-bearing knee arthroplasty: a prospective comparative study with minimum 10-year follow-up.

Science.gov (United States)

Riaz, O; Aqil, A; Sisodia, G; Chakrabarty, G

2017-12-01

To prospectively compare long-term clinical and radiological outcomes following a cruciate retaining fixed-bearing (FB) and a mobile-bearing (MB) primary total knee replacement (TKR). We prospectively reviewed 113 TKRs in 99 patients (14 bilateral) with a PFC sigma cruciate retaining rotating platform system, at an average follow-up of 11.1 years (range 10-12). Results were contrasted with those from 89 TKRs in 72 patients (17 bilateral) with a PFC sigma cruciate fixed-bearing prosthesis, at an average follow-up of 12.1 years (range 10-14.1). Outcomes collected included pre- and post-operative range of motion, Oxford Knee Scores, complications encountered, as well as radiographical assessments of polyethylene wear. In the MB group, mean Oxford Knee Scores improved from 16 pre-operatively to 42 at final follow-up. The mean range of motion was 115° (75-130). In the FB group, mean Oxford Knee Scores improved from 16.2 pre-operatively to 42.5 at final follow-up. The mean range of motion was 111.2 (80-135) degrees at final follow-up. We failed to elicit an objectively demonstrable clinical difference between the MB- and FB-implanted knees. Similarly, radiological benefits of the MB implants with regard to polyethylene wear were not evident at a minimum 10-year follow-up.

Development and evaluation of automatic registration system for multi-range fiducials applied to augmented reality

International Nuclear Information System (INIS)

Ishii, Hirotake; Yang, Shoufeng; Yan, Weida; Shimoda, Hiroshi; Izumi, Masanori

2009-01-01

In this study, an automatic registration system was developed that can measure 3 dimensional position and orientation of multi-range fiducials automatically using a camera, laser range finder and motion bases connected to a computer. Result of the experimental evaluation shows that the measurement takes about 50 seconds per marker and RMSE (Root Mean Square Error) of the position and orientation measurement are 3.5 mm and 1.2 degrees respectively. (author)

Accurate and stable equal-pressure measurements of water vapor transmission rate reaching the 10-6 g m-2 day-1 range

Science.gov (United States)

Nakano, Yoichiro; Yanase, Takashi; Nagahama, Taro; Yoshida, Hajime; Shimada, Toshihiro

2016-10-01

The water vapor transmission rate (WVTR) of a gas barrier coating is a critically important parameter for flexible organic device packaging, but its accurate measurement without mechanical stress to ultrathin films has been a significant challenge in instrumental analysis. At the current stage, no reliable results have been reported in the range of 10-6 g m-2 day-1 that is required for organic light emitting diodes (OLEDs). In this article, we describe a solution for this difficult, but important measurement, involving enhanced sensitivity by a cold trap, stabilized temperature system, pumped sealing and calibration by a standard conductance element.

Non-Rutherford cross-sections for alpha elastic scattering off Z = 28-38 elements in the energy range up to 10 MeV

Science.gov (United States)

Gurbich, A. F.; Bokhovko, M. V.

2018-04-01

The alpha elastic scattering cross-sections for Ni, Cu, and Y were measured at the energies above the onset of the non-Rutherford scattering. The obtained experimental data along with data from literature were incorporated into the theoretical analysis in the framework of the optical model. The optimization of the model parameters provided a basis for the calculations of the differential cross-sections for Z = 28-38 elements in the energy range up to 10 MeV. The obtained cross sections were made available for common use through the SigmaCalc web site at http://sigmacalc.iate.obninsk.ru/.

Influence of damage rate on physical and mechanical properties and swelling of 18Cr-9Ni austenitic steel in the range of 3.10-9 to 4.10-8 dpa/sec

International Nuclear Information System (INIS)

Shcherbakov, E.N.; Kozlov, A.V.; Yagovitin, R.I.; Evseev, M.V.; Kinev, E.A.; Isobe, Y.; Sagisaka, M.; Okita, T.; Sekimura, N.; Garner, F.

2007-01-01

Full text of publication follows: Whereas most data on radiation-induced changes in mechanical properties or dimensional stability needed for fusion - relevant dpa levels and dpa rates are generated at relatively high neutron flux in fast reactors, many fusion and fission components will operate at much lower dpa rates. Much less data are available from long-lived structural components operating at very low flux levels. In addition most published data were generated from relatively thin specimens (∼1-2 mm or less), while some actual fusion structural components can be on the order of 1-2 cm thick. In this study we have examined a 9 cm diameter pipe constructed from Fe-18Cr-9Ni steel analogous to AISI 304 that stayed outside the core of BN-600 for 22 years. The walls of the pipe were 2 cm thick and experienced temperatures in the range 370-375 deg. C. The walls were sectioned into 5 slices at a number of positions to yield doses in the range 1.5 to 22 dpa at 3 x 10 -9 to 4 x 10 -8 dpa/s. Changes in elastic moduli were studied using an ultrasonic technique and changes in electrical resistivity and mechanical properties of the 18Cr9Ni austenitic steel was examined. Swelling was measured both by immersion density and electron microscopy, reaching a maximum of ∼3 %. Swelling appears to be accelerated somewhat at these lower dpa rates as observed in other recent studies. Tensile properties were also measured. Radiation-induced changes of electrical resistivity, Young's and shear moduli were observed but did not agree fully with predictions based on voids alone. Strong contributions from second phase precipitates were found to be contributing to changes in both physical and mechanical properties. (authors)

The effects of temperature upon the electrophysiological properties of Tetrahymena pyriformis-NT1.

Science.gov (United States)

Connolly, J G; Brown, I D; Lee, A G; Kerkut, G A

1985-01-01

Cells of Tetrahymena pyriformis--NT1 were cultured at 38 degrees C (Tg 38 degrees C) and 20 degrees C (Tg 20 degrees C) and their properties investigated over the range 0-40 degrees C. Tg 20 degrees C cells were viable in the range 3-33 degrees C and changes in their properties were readily reversible between 10 degrees C and 30 degrees C. Tg 38 degrees cells were viable in the range 40-10 degrees C and their property changes were immediately reversible in the range 40-23 degrees C. The I-V relations of Tg 38 degrees C cells showed increased excitability as the cells were cooled from 40 degrees C. At 10 degrees C there was a considerable loss of excitability and slope resistance. Cooling Tg 20 degrees C cells from 20 degrees C gave a similar pattern, although over a narrower temperature range. Warming Tg 20 degrees C Tetrahymena above 20 degrees C led to a progressive loss of excitability and the cells were markedly less viable above 35 degrees C. Within physiological limits the regenerative spike magnitude, repolarization time, time to peak and input resistance increased as temperature was lowered, whereas resting potential was diminished. When compared at their growth temperatures and most intermediate temperatures, the value of the various parameters monitored were generally different for the two cultures. The Q10 value for resting potential changes of Tg 20 degrees C cells about 20 degrees C was 1.20. As in T. vorax this was significantly (P less than 0.01) greater than that predicted for a diffusion potential and suggested that T. pyriformis--NT1 may have an electrogenic pump component in its membrane potential.

The road to developing an advanced degree program in public health preparedness.

Science.gov (United States)

Cherry, Robert A; Davis, Tom

2007-08-01

The master of homeland security (MHS) degree in public health preparedness at the Pennsylvania State University College of Medicine is the first degree program of its kind offered by any U.S. medical school. The field of public health preparedness has been increasingly viewed as a new, emerging professional discipline, which academic medicine is well positioned to complement. The process by which the MHS program has evolved from conception to realization is a case study in the mission-based alignment of core values and leadership between the government and academic medicine. Recognizing the need for multidisciplinary involvement, the program architects reconsidered the traditional approach to the development and implementation of new graduate degree programs. Instead, a more flexible, loosely connected network of strategic partners and alliances was adopted. These partnerships were developed and cultivated by vested individuals who excelled in specific core competencies and came together to create value. This allowed for both the expertise and flexibility needed to adapt quickly to the evolving homeland security environment in the United States. To that end, this article describes the 10-step multidisciplinary program-development process that spanned three years and culminated in the establishment of this new graduate degree program. The MHS program as it now stands focuses on public health preparedness, including epidemiological evaluation, disaster communication and psychology, agricultural biosecurity, and critical infrastructure protection. The program is geared toward the practicing professional already working in the field, and its graduates are positioned to be among the top leaders, educators, and researchers in homeland security.

How Much Protection Does a College Degree Afford? The Impact of the Recession on Recent College Graduates

Science.gov (United States)

Economic Mobility Project, 2013

2013-01-01

This report examines whether a college degree protected recent graduates from a range of poor employment outcomes during the recession, including unemployment, low-skill jobs, and lesser wages. The report draws upon data from the 2003-2011 Current Population Survey (CPS) to examine the early labor market outcomes of 21- through 24-year-olds. The…

Increasingly Global: Combining an International Business Degree with a Post-Degree Designation

Science.gov (United States)

Smith, Rachel; Terry, Andy; Vibhakar, Ashvin

2006-01-01

In the increasingly complex and competitive global marketplace, many students seek to gain multiple skills and credentials that can aid them in their career goals. One such career strategy weds a general overarching comprehensive degree with a specific and targeted skill set. This paper provides a viable curriculum path for students who seek…

Investigation of complete and incomplete fusion in 20Ne + 51V system using recoil range measurement

Directory of Open Access Journals (Sweden)

Ali Sabir

2015-01-01

Full Text Available Recoil range distributions of evaporation residues, populated in 20Ne + 51V reaction at Elab ≈ 145 MeV, have been studied to determine the degree of momentum transferred through the complete and incomplete fusion reactions. Evaporation residues (ERs populated through the complete and incomplete fusion reactions have been identified on the basis of their recoil range in the Al catcher medium. Measured recoil range of evaporation residues have been compared with the theoretical value calculated using the code SRIM. Range integrated cross section of observed ERs have been compared with the value predicted by statistical model code PACE4.

Effect of the degree of sternal depression on the cardiac rotation in pectus excavatum: evaluation with spiral CT

International Nuclear Information System (INIS)

Yu Jianqun; Yang Zhigang; Li Zhenlin; Guo Yingkun; Lu Chunyan; Zhang Mei

2004-01-01

Objective: To evaluate the effects of the degree of sternal depression on the cardiac rotation in pectus excavatum by using spiral CT. Methods: Spiral CT features of 32 patients with surgically corrected pectus excavatum were retrospectively reviewed. They included 27 males and 5 females ranging in age from 6 months to 17 years (mean, 6.3 years). Analysis was based on relationship among the degree of sternal depression, CT depression index, cardiac rotation angle, and PV angle. Results: 32 cases of pectus excavatum presented the sternal depression (21 ± 7) mm, CT depression index 2.9 ± 1.8, cardiac rotation angle (55.9 ± 9.8) degree, and PV angle (49.8 ± 14.0) degree, respectively. The sternal depression (17 mm) in cases with CT depression index less than 2.4 was smaller than those with CT depression index 2.4-2.9 (21 mm) and CT depression index larger than 2.9 (27 mm) (F 5.39, P<0.01). Cardiac rotation angle (49.7 degree) in cases with CT depression index less than 2.4 was smaller than those with CT depression index 2.4-2.9 (55.5 degree) and CT depression index larger than 2.9 (66.9 degree) (F=7.44, P<0.01). PV angle (58.7 degree) in cases with CT depression index less than 2.4 was larger than those with CT depression index 2.4-2.9 (46.5 degree) and CT depression index more than 2.9 (42.4 degree) ( F=3.33, P<0.05). Cardiac rotation angle of pectus excavatum had positive correlation with the CT depression index (γ=0.73, P<0.01). Conclusion: Spiral CT is a better tool for revealing chest deformity and corresponding cardiac rotation. The degree of sternal depression in pectus excavatum directly influences the cardiac rotation, and they had positive correlation. (authors)

Shoulder Dynamic Control Ratio and Rotation Range of Motion in Female Junior Elite Handball Players and Controls.

Science.gov (United States)

van Cingel, Robert; Habets, Bas; Willemsen, Linn; Staal, Bart

2018-03-01

To compare glenohumeral range of motion and shoulder rotator muscle strength in healthy female junior elite handball players and controls. Cross-sectional case-control study. Sports medical center. Forty elite female handball players and 30 controls active in nonoverhead sports participated in this study. Passive external rotator (ER), internal rotator (IR), and total range of motion (TROM) of the dominant and nondominant arm were examined with a goniometer. An isokinetic dynamometer was used to evaluate concentric and eccentric rotator muscle strength at 60 and 120 degrees/s with dynamic control ratio (DCR = ERecc:IRcon) as the main outcome parameter. Except for the ER range of motion in the nondominant arm, no significant differences were found between groups for IR, ER of the dominant arm, and the TROM. Within the handball group, the side-to-side difference for IR of the dominant arm was -1.4 degrees. The ER and the TROM of the dominant arm were significantly larger, 6.3 and 4.9 degrees, respectively. For both groups, the DCR values were above 1 and no significant differences were found between the dominant and nondominant arm. The DCR values in the handball group were significantly lower than in the control group. Based on the adopted definitions for muscle imbalance, glenohumeral internal range of motion deficit and TROM deficit our elite female handball players seem not at risk for shoulder injuries. Prospective studies are needed to support the belief that a DCR below 1 places the shoulder at risk for injury.

Linguistic validation of stigmatisation degree, self-esteem and knowledge questionnaire among asthma patients using Rasch analysis.

Science.gov (United States)

Ahmad, Sohail; Ismail, Ahmad Izuanuddin; Khan, Tahir Mehmood; Akram, Waqas; Mohd Zim, Mohd Arif; Ismail, Nahlah Elkudssiah

2017-04-01

The stigmatisation degree, self-esteem and knowledge either directly or indirectly influence the control and self-management of asthma. To date, there is no valid and reliable instrument that can assess these key issues collectively. The main aim of this study was to test the reliability and validity of the newly devised and translated "Stigmatisation Degree, Self-Esteem and Knowledge Questionnaire" among adult asthma patients using the Rasch measurement model. This cross-sectional study recruited thirty adult asthma patients from two respiratory specialist clinics in Selangor, Malaysia. The newly devised self-administered questionnaire was adapted from relevant publications and translated into the Malay language using international standard translation guidelines. Content and face validation was done. The data were extracted and analysed for real item reliability and construct validation using the Rasch model. The translated "Stigmatisation Degree, Self-Esteem and Knowledge Questionnaire" showed high real item reliability values of 0.90, 0.86 and 0.89 for stigmatisation degree, self-esteem, and knowledge of asthma, respectively. Furthermore, all values of point measure correlation (PTMEA Corr) analysis were within the acceptable specified range of the Rasch model. Infit/outfit mean square values and Z standard (ZSTD) values of each item verified the construct validity and suggested retaining all the items in the questionnaire. The reliability analyses and output tables of item measures for construct validation proved the translated Malaysian version of "Stigmatisation Degree, Self-Esteem and Knowledge Questionnaire" as a valid and highly reliable questionnaire.

Pre-ignition confinement and deflagration violence in LX-10 and PBX 9501

Energy Technology Data Exchange (ETDEWEB)

Tringe, J. W., E-mail: tringe2@llnl.gov; Glascoe, E. A.; McClelland, M. A.; Greenwood, D.; Chambers, R. D.; Springer, H. K.; Levie, H. W. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

2014-08-07

presented here rupture at lower pressures, in the range 10 MPa, suggesting that moderately higher temperatures and pressures are present near the deflagration front. For these explosives, however the most important property for determining deflagration violence is the degree of inertial confinement.

Pre-ignition confinement and deflagration violence in LX-10 and PBX 9501

International Nuclear Information System (INIS)

Tringe, J. W.; Glascoe, E. A.; McClelland, M. A.; Greenwood, D.; Chambers, R. D.; Springer, H. K.; Levie, H. W.

2014-01-01

presented here rupture at lower pressures, in the range 10 MPa, suggesting that moderately higher temperatures and pressures are present near the deflagration front. For these explosives, however the most important property for determining deflagration violence is the degree of inertial confinement

Impact of the degree of cooking on starch digestibility of rice - An in vitro study.

Science.gov (United States)

Tamura, Masatsugu; Singh, Jaspreet; Kaur, Lovedeep; Ogawa, Yukiharu

2016-01-15

The impact of cooking degree on the starch digestibility of a non-waxy, cooked rice was examined through a simulated gastro-small intestinal in vitro digestion model. The starch hydrolysis of both non-homogenised and homogenised cooked rice samples during simulated digestion was also compared in order to examine the impact of grain structure on starch digestibility. Polished rice grains were cooked in boiling water for 10min (partially cooked) and 20min (fully cooked) to obtain samples of different cooking degree. No significant differences in the equilibrium starch hydrolysis (%) were observed among the partially and fully cooked grains, although significant differences were observed among the uncooked and cooked samples. The equilibrium starch hydrolysis (%) of homogenised rice was higher than its non-homogenised counterpart. These results showed that rice starch digestibility should not be affected by the cooking degrees related to starch gelatinisation, but was influenced by the modification/destruction of the grain structure during mechanical processing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Roster of Astronomy Departments with Enrollment and Degree Data, 2012: Results from the 2012 Survey of Enrollments and Degrees. Focus On

Science.gov (United States)

Nicholson, Starr; Mulvey, Patrick J.

2013-01-01

The U.S. has experienced a sharp increase in the number of bachelor astronomy degrees awarded in recent years with about twice as many degrees now being awarded than a decade ago. There were 385 astronomy bachelor's degrees awarded in the 2011-12 academic year. The number of astronomy PhDs awarded in recent years is up about 50% from a decade…

Cryopumping by liquid neon in 105...10-1 Pa range

International Nuclear Information System (INIS)

Batrakov, B.P.; Kravchenko, V.A.; Volkov, Yu.N.

1982-01-01

For forevacuum cryocondensation pumps conic pumping-out elements are suggested. The range of pumping out of angles at the conic top optimum from the point of view of specific quickness. Conic pUmping-out elements with ducted and external cooling are created; the dUcted pumping-out element can serve as a module when creatipg forevacuum condensation pumps of different efficiency. Specific quicknesses of pumping-out these elements when cooling them with liquid neon are measured. It is shown that in the case of durable pumping-out in the liquid phase a considerable role is played by components of the air condensed in the solid phase. Solid condensate that appears on cryosurface is net completely removed by streaming liquid condensate and brings about the decrease in the specific quickness of pumping-out. It is shown that an appropriate choice of the method of treating the internal surface of pumping out element affect the specific quickness of pumping out. The method of treatment is suggested and experimentally tested which permits to increase the specific fastness of pumping out. Experiments on the condensation of nitrogen and air in the solid phase on the surface cooled by liquid neon under conditions of transition and viseous regimes of the flow of pumped-out gas, are performed. It is shown that a considerable effect during pumping-out under these conditions is played by the thickness of the condensate layer and the presence of non-condensed admixtures in the pumped-out gas. In this case the specific quickness of pumping-out is much less than maximum theoretical

Time series of low-degree geopotential coefficients from SLR data: estimation of Earth's figure axis and LOD variations

Science.gov (United States)

Luceri, V.; Sciarretta, C.; Bianco, G.

2012-12-01

The redistribution of the mass within the earth system induces changes in the Earth's gravity field. In particular, the second-degree geopotential coefficients reflect the behaviour of the Earth's inertia tensor of order 2, describing the main mass variations of our planet impacting the EOPs. Thanks to the long record of accurate and continuous laser ranging observations to Lageos and other geodetic satellites, SLR is the only current space technique capable to monitor the long time variability of the Earth's gravity field with adequate accuracy. Time series of low-degree geopotential coefficients are estimated with our analysis of SLR data (spanning more than 25 years) from several geodetic satellites in order to detect trends and periodic variations related to tidal effects and atmospheric/oceanic mass variations. This study is focused on the variations of the second-degree Stokes coefficients related to the Earth's principal figure axis and oblateness: C21, S21 and C20. On the other hand, surface mass load variations induce excitations in the EOPs that are proportional to the same second-degree coefficients. The time series of direct estimates of low degree geopotential and those derived from the EOP excitation functions are compared and presented together with their time and frequency analysis.

Familial clustering of myocardial infarction in first-degree relatives

DEFF Research Database (Denmark)

Nielsen, Mia; Andersson, Charlotte; Gerds, Thomas A

2013-01-01

showed an RR of 4.30 (95% confidence interval 3.53–5.23) for siblings of a patient with MI. Children of parents with MI also showed high risk: for children of a maternal case RR 2.40 (2.20–2.60), and of a paternal case RR 1.98 (1.98–2.09), respectively; P value for gender interaction paternal...... case with MI at an age 50 years was associated with a risk of 1.83 (1.73–1.93). For maternal cases below and above 50 years of age the risks were 3.23 (2.56–4.10) and 2.31 (2.11–2.52), respectively. Conclusion First-degree relatives...

Improving Scientific Writing in Undergraduate Geosciences Degrees Through Peer Review

Science.gov (United States)

Day, E. A.; Collins, G. S.; Craig, L.

2016-12-01

In the British educational system, students specialise early. Often geoscience undergraduates have not taken a class that requires extended writing since they were sixteen years old. This can make it difficult for students to develop the written skills necessary for a geoscience degree, which often has assessments in the form of essays and reports. To improve both the writing and editing skills of our undergraduates we have introduced a peer review system, in which seniors review the work of first year students. At Imperial College London we set written coursework in every year of the degree. Communication is taught and assessed in many courses. There are two major modules with substantial written components that bookend the undergraduate degree at Imperial; the freshmen all write an assessed essay, while all seniors take 'Science Communication', a course that aims to prepare them for a range of possible careers. In the 2015-16 academic year we linked these courses by introducing a modified form of peer marking and instruction. Seniors had to complete reviews of draft first year essays for credit in Science Communication. These reviews are completed for the department 'journal' and introduce the first and fourth years to the nature of peer review. Seniors learn how to critically, but kindly, evaluate the work of other students, and are also prepared for potentially submitting their senior theses to journals. Reviews were managed by volunteer seniors, who acted as associate editors. They allocated anonymous reviewers and wrote decision letters, which were sent to the freshmen before their final assessed essay submission. Ultimately the fourth year reviews were formally assessed and graded by members of staff, as were the revised and resubmitted first year essays. Feedback for both courses has improved since the introduction of student reviews of essays. The markers of the freshman essay have also commented on the improvement in the standard of the writing and a

Experimental evidence of a diffusion process associated with the mass asymmetry degree of freedom in heavy ion reactions

International Nuclear Information System (INIS)

Moretto, L.G.; Babinet, R.P.; Galin, J.; Thompson, S.G.

1975-01-01

Dramatic changes of fragment angular distributions over a large range of atomic numbers in the reactions induced by 14 N, 20 Ne, and 40 Ar on natural Ag targets are interpreted as evidence of a diffusion-controlled evolution of an intermediate complex along the mass asymmetry degree of freedom. (Auth.)

Current Trends in Associate Degree Nursing Programs.

Science.gov (United States)

Blackstone, Elaine Grant

This study was designed to ascertain current trends in associate degree nursing programs and to discover innovative ideas and techniques which could be applied to the existing program at Miami-Dade Community College (Florida). Data was compiled from interviews with representatives of ten associate degree nursing programs in six states. Information…

Osteoarthritis of the patella, lateral femoral condyle and posterior medial femoral condyle correlate with range of motion.

Science.gov (United States)

Suzuki, Takashi; Motojima, Sayaka; Saito, Shu; Ishii, Takao; Ryu, Keinosuke; Ryu, Junnosuke; Tokuhashi, Yasuaki

2013-11-01

The type of osteoarthritis and the degree of severity which causes restriction of knee range of motion (ROM) is still largely unknown. The objective of this study was to analyse the location and the degree of cartilage degeneration that affect knee range of motion and the connection, if any, between femorotibial angle (FTA) and knee ROM restriction. Four hundreds and fifty-six knees in 230 subjects with knee osteoarthritis undergoing knee arthroplasty were included. Articular surface was divided into eight sections, and cartilage degeneration was evaluated macroscopically during the operation. Cartilage degeneration was classified into four grades based on the degree of exposure of subchondral bone. A Pearson correlation was conducted between FTA and knee flexion angle to determine whether high a degree of FTA caused knee flexion restriction. A logistic regression analysis was also conducted to detect the locations and levels of cartilage degeneration causing knee flexion restriction. No correlation was found between FTA and flexion angle (r = -0.08). Flexion angle was not restricted with increasing FTA. Logistic regression analysis showed significant correlation between restricted knee ROM and levels of knee cartilage degeneration in the patella (odds ratio (OR) = 1.77; P = 0.01), the lateral femoral condyle (OR = 1.62; P = 0.03) and the posterior medial femoral condyle (OR = 1.80; P = 0.03). For clinical relevance, soft tissue release and osteophyte resection around the patella, lateral femoral condyle and posterior medial femoral condyle might be indicated to obtain a higher degree of knee flexion angle.

Note: A high dynamic range, linear response transimpedance amplifier.

Science.gov (United States)

Eckel, S; Sushkov, A O; Lamoreaux, S K

2012-02-01

We have built a high dynamic range (nine decade) transimpedance amplifier with a linear response. The amplifier uses junction-gate field effect transistors (JFETs) to switch between three different resistors in the feedback of a low input bias current operational amplifier. This allows for the creation of multiple outputs, each with a linear response and a different transimpedance gain. The overall bandwidth of the transimpedance amplifier is set by the bandwidth of the most sensitive range. For our application, we demonstrate a three-stage amplifier with transimpedance gains of approximately 10(9)Ω, 3 × 10(7)Ω, and 10(4)Ω with a bandwidth of 100 Hz.

Normal range values for thromboelastography in healthy adult volunteers

Directory of Open Access Journals (Sweden)

S. Scarpelini

2009-12-01

Full Text Available Thromboelastography (TEG® provides a functional evaluation of coagulation. It has characteristics of an ideal coagulation test for trauma, but is not frequently used, partially due to lack of both standardized techniques and normal values. We determined normal values for our population, compared them to those of the manufacturer and evaluated the effect of gender, age, blood type, and ethnicity. The technique was standardized using citrated blood, kaolin and was performed on a Haemoscope 5000 device. Volunteers were interviewed and excluded if pregnant, on anticoagulants or having a bleeding disorder. The TEG® parameters analyzed were R, K, α, MA, LY30, and coagulation index. All volunteers outside the manufacturer’s normal range underwent extensive coagulation investigations. Reference ranges for 95% for 118 healthy volunteers were R: 3.8-9.8 min, K: 0.7-3.4 min, α: 47.8-77.7 degrees, MA: 49.7-72.7 mm, LY30: -2.3-5.77%, coagulation index: -5.1-3.6. Most values were significantly different from those of the manufacturer, which would have diagnosed coagulopathy in 10 volunteers, for whom additional investigation revealed no disease (81% specificity. Healthy women were significantly more hypercoagulable than men. Aging was not associated with hypercoagulability and East Asian ethnicity was not with hypocoagulability. In our population, the manufacturer’s normal values for citrated blood-kaolin had a specificity of 81% and would incorrectly identify 8.5% of the healthy volunteers as coagulopathic. This study supports the manufacturer’s recommendation that each institution should determine its own normal values before adopting TEG®, a procedure which may be impractical. Consideration should be given to a multi-institutional study to establish wide standard values for TEG®.

Sequence of the radioactive tryptic peptide obtained after inactivating the F1-ATPase of the thermophilic bacterium PS3 with 5'-p-fluorosulfonylbenzoyl[3H]adenosine at 65 degrees C

International Nuclear Information System (INIS)

Bullough, D.A.; Yoshida, M.; Allison, W.S.

1986-01-01

Following a lag of about 30 min, the F1-ATPase from the thermophilic bacterium, PS3 (TF1), was inactivated slowly by 0.8 mM 5'-p-fluorosulfonylbenzoyladenosine (FSBA) at 23 degrees C and pH 7.0. When the enzyme was treated with 0.2 mM FSBA at pH 7.0 and 23 degrees C for 15 min and gel-filtered, no enzyme activity was lost. However, the lag in inactivation was abolished when the enzyme was subsequently incubated with 2.0 mM FSBA at 23 degrees C in the pH range from 6.8 to 10.0. The pH-inactivation profile obtained under these conditions revealed a pK alpha of about 9.3 which was associated with the inactivation. When pretreated TF1 was inactivated at 23 degrees C with [3H]FSBA by about 90%, greater than 20 mol of [3H]SBA was incorporated per mole of enzyme. TF1 was inactivated rapidly by 0.8 mM FSBA at pH 6.4 and 65 degrees C, and no lag was observed. Following inactivation of TF1 with 0.8 mM [3H]FSBA at 65 degrees C and pH 6.4, about 10 mol of [3H]SBA was incorporated per mole of enzyme. When a tryptic digest of the labeled enzyme was fractionated by reversed-phase high-performance liquid chromatography, a single major radioactive peptide was isolated. When subjected to automatic Edman degradation, this peptide was shown to have the amino acid sequence: A-L-A-P-E-I-V-G-E-E-H-X-Q-V-A-R, where X indicates that a phenylthiohydantoin derivative was not detected in cycle 12. However, from the DNA sequence of the gene encoding the subunit of TF1 (Y. Kagawa, M. Ishizuka, T. Saishu, and S. Nakao (1985)), this position has been shown to be occupied by tyrosine. This tyrosine is homologous with beta-Tyr-368 of the bovine mitochondrial F1-ATPase (MF1) the modification of which is responsible for the inactivation MF1 by FSBA

Rotaphone, a Self-Calibrated Six-Degree-of-Freedom Seismic Sensor and Its Strong-Motion Records

Czech Academy of Sciences Publication Activity Database

Brokešová, J.; Málek, Jiří

2013-01-01

Roč. 84, č. 5 (2013), s. 737-744 ISSN 0895-0695 R&D Projects: GA ČR GAP210/10/0925; GA MŠk LM2010008 Institutional support: RVO:67985891 Keywords : rotational seismology * sensor * six-degree-of-freedom Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 2.268, year: 2013

Radiation-induced polymerization of water-saturated styrene in a wide range of dose rate

International Nuclear Information System (INIS)

Takezaki, J.; Okada, T.; Sakurada, I.

1978-01-01

Radiation-induced polymerization of water-saturated styrene (water content 3.5 x 10 -2 mole/liter) was carried out in a wide range of dose rate between 1.2 x 10 3 and 1.8 x 10 7 rad/sec, and compared with the polymerization of the moderately dried styrene (water content 3.2 x 10 -3 mole/liter). Molecular weight distribution curves of the polymerization products showed that they were generally consisted of four parts, namely, oligomers, radical, cationic, and super polymers. Contributions of the four constituents to the polymerization and the number average degrees of polymerization (DP) of the four kinds of polymers were calculated by the graphical analysis of the curves. The rate of radical polymerization and DP of radical polymers are independent of the water content; the dose rate dependences of the polymerization rate and DP agree with the well known square root and inverse square root laws, respectively, of the radical polymerization of styrene. The rate of ionic polymerization is directly proportional to the dose rate, but it decreases, at a given dose rate, inversely proportional to the water content of styrene. DP of ionic polymer is independent of the dose rate but decreases with increasing water content. The super polymer of DP about 10 4 is not formed in the case of the moderately dried styrene. G values for the initiating radical and ion formation are calculated to be independently of the dose rate and water content, 0.66 and 0.027, respectively. It was suggested that oligomer was formed in the early stage by the interaction of cation with anion and only those cations which had survived underwent polymerization. 10 figures, 4 tables

HEVC for high dynamic range services

Science.gov (United States)

Kim, Seung-Hwan; Zhao, Jie; Misra, Kiran; Segall, Andrew

2015-09-01

Displays capable of showing a greater range of luminance values can render content containing high dynamic range information in a way such that the viewers have a more immersive experience. This paper introduces the design aspects of a high dynamic range (HDR) system, and examines the performance of the HDR processing chain in terms of compression efficiency. Specifically it examines the relation between recently introduced Society of Motion Picture and Television Engineers (SMPTE) ST 2084 transfer function and the High Efficiency Video Coding (HEVC) standard. SMPTE ST 2084 is designed to cover the full range of an HDR signal from 0 to 10,000 nits, however in many situations the valid signal range of actual video might be smaller than SMPTE ST 2084 supported range. The above restricted signal range results in restricted range of code values for input video data and adversely impacts compression efficiency. In this paper, we propose a code value remapping method that extends the restricted range code values into the full range code values so that the existing standards such as HEVC may better compress the video content. The paper also identifies related non-normative encoder-only changes that are required for remapping method for a fair comparison with anchor. Results are presented comparing the efficiency of the current approach versus the proposed remapping method for HM-16.2.

Azimuthal spectrum after parametric down-convertion with radial degrees of freedom

CSIR Research Space (South Africa)

Zhang, Y

2014-08-01

Full Text Available of the OAM spectrum, i.e. the spiral bandwidth.6–10 Hence, a large spiral bandwidth indicates that an OAM entangled quantum state contains more OAM degrees of freedom that can be used to encode quantum information. The Laguerre-Gaussian (LG) modes are OAM... counter (CC). 50/50 beam splitter Laser BBO A B SLM SLM SMF SMF CC APD APD Signal Idler Figure 1. Diagram of the experimental setup used to prepare and measure the OAM entangled photon pairs. 3.2 Modelling the experiment Due to the experimental parameters...

Requirements of British universities for higher medical degrees.

OpenAIRE

Johnson, R

1991-01-01

OBJECTIVE--To examine the requirements and opportunities for obtaining a doctor of medicine or master of surgery degree from a university in the United Kingdom other than the graduate's own, particularly in the case of foreign graduates. DESIGN--Review of regulations governing the award of doctor of medicine and master of surgery degrees in British universities. SETTING--All 19 universities in the United Kingdom offering clinical courses. MAIN OUTCOME MEASURE--Availability of degrees to gradu...

Protograph LDPC Codes with Node Degrees at Least 3

Science.gov (United States)

Divsalar, Dariush; Jones, Christopher

2006-01-01

In this paper we present protograph codes with a small number of degree-3 nodes and one high degree node. The iterative decoding threshold for proposed rate 1/2 codes are lower, by about 0.2 dB, than the best known irregular LDPC codes with degree at least 3. The main motivation is to gain linear minimum distance to achieve low error floor. Also to construct rate-compatible protograph-based LDPC codes for fixed block length that simultaneously achieves low iterative decoding threshold and linear minimum distance. We start with a rate 1/2 protograph LDPC code with degree-3 nodes and one high degree node. Higher rate codes are obtained by connecting check nodes with degree-2 non-transmitted nodes. This is equivalent to constraint combining in the protograph. The condition where all constraints are combined corresponds to the highest rate code. This constraint must be connected to nodes of degree at least three for the graph to have linear minimum distance. Thus having node degree at least 3 for rate 1/2 guarantees linear minimum distance property to be preserved for higher rates. Through examples we show that the iterative decoding threshold as low as 0.544 dB can be achieved for small protographs with node degrees at least three. A family of low- to high-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

Influence of body condition on incidence and degree of hepatic lipidosis in cows

Directory of Open Access Journals (Sweden)

Šamanc Horea

2008-01-01

Full Text Available The aim of this study was to investigate the influence of energy status of cows, estimated by body condition score, on the incidence and the degree of hepatic lipidosis during the early stage of lactation. Cows were divided into four groups: dry, early puerperal, early lactation and late lactation period. Each group consisted of 60 cows. Body condition was scored by the method established in Elaco Animal Health Buletin Al 8478. According to this method, body condition score is represented numerically from 1 to 5 points. Liver samples for pathohistological analyses were taken by biopsy from early lactation cows (60. day of lactation. Fat content in hepatocytes was determined morphometrically and results were compared with criteria based on total lipid and triglyceride content in liver tissue. On farm A, average body condition scores were in a range from 3.31, at sixty days of lactation, to 3.86 points in the dry period. Nevertheless, the range was wider on farm B, and was from 2.18 points at sixty days of lactation to 4.15 points at the dry period. Besides, differences in average body condition scores were higher than 1 point, and in some cases (between late lactation or dry period to sixty days of lactation were almost 2 points. The incidence and the degree of hepatic lipidosis strongly differ between the two examined farms. On farm A the incidence of hepatic lipidosis was 18.33 percent, while on farm B that percent was much higher (43.32. A significant difference was established in the degree of hepatic lipidosis between those two farms. On farm A diffuse hepatic lipidosis was determined in 5.0 percent of cows, while on farm B that percent was 18.33. According to these results, most of the cows on farm B had uncontrolled lipomobilisation and severe fatty liver during the early lactation period, probably due to the obesity of these cows in late lactation and the dry period.

Measurements of the prompt neutron spectra in 233U, 235U, 239Pu thermal neutron fission in the energy range of 0.01-5 MeV and in 252Cf spontaneous fission in the energy range of 0.01-10 MeV

International Nuclear Information System (INIS)

Starostov, B.I.; Semenov, A.F.; Nefedov, V.N.

1978-01-01

The measurement results on the prompt neutron spectra in 233 U, 235 U, 239 Pu thermal neutron fission in the energy range of 0.01-5 MeV and in 252 Cf spontaneous fission in the energy range of 0.01-10 MeV are presented. The time-of-flight method was used. The exceeding of the spectra over the Maxwell distributions is observed at E 252 Cf neutron fission spectra. The spectra analysis was performed after normalization of the spectra and corresponding Maxwell distributions for one and the same area. In the range of 0.05-0.22 MeV the yield of 235 U + nsub(t) fission neutrons is approximately 8 and approximately 15 % greater than the yield of 252 Cf and 239 Pu + nsub(t) fission neutrons, respectively. In the range of 0.3-1.2 MeV the yield of 235 U + nsub(t) fission neutrons is 8 % greater than the fission neutron yield in case of 239 Pu + nsub(t) fission. The 235 U + nsub(t) and 233 U + nsub(t) fission neutron spectra do not differ from one another in the 0.05-0.6 MeV range

Structure and origin of the 85 degrees E ridge

Digital Repository Service at National Institute of Oceanography (India)

Ramana, M.V.; Subrahmanyam, V.; Chaubey, A.K.; Ramprasad, T.; Sarma, K.V.L.N.S.; Krishna, K.S.; Desa, M.; Murty, G.P.S.; Subrahmanyam, C

The submerged 85 degrees E Ridge in the Bay of Bengal trends approximately N-S between 19 degrees N and 6 degrees N latitudes. Off the southeast coast of Sri Lanka it takes an arcuate shape and seems to terminate with the northweard extension...

Shrinkage Degree in $L_{2}$ -Rescale Boosting for Regression.

Science.gov (United States)

Xu, Lin; Lin, Shaobo; Wang, Yao; Xu, Zongben

2017-08-01

L 2 -rescale boosting ( L 2 -RBoosting) is a variant of L 2 -Boosting, which can essentially improve the generalization performance of L 2 -Boosting. The key feature of L 2 -RBoosting lies in introducing a shrinkage degree to rescale the ensemble estimate in each iteration. Thus, the shrinkage degree determines the performance of L 2 -RBoosting. The aim of this paper is to develop a concrete analysis concerning how to determine the shrinkage degree in L 2 -RBoosting. We propose two feasible ways to select the shrinkage degree. The first one is to parameterize the shrinkage degree and the other one is to develop a data-driven approach. After rigorously analyzing the importance of the shrinkage degree in L 2 -RBoosting, we compare the pros and cons of the proposed methods. We find that although these approaches can reach the same learning rates, the structure of the final estimator of the parameterized approach is better, which sometimes yields a better generalization capability when the number of sample is finite. With this, we recommend to parameterize the shrinkage degree of L 2 -RBoosting. We also present an adaptive parameter-selection strategy for shrinkage degree and verify its feasibility through both theoretical analysis and numerical verification. The obtained results enhance the understanding of L 2 -RBoosting and give guidance on how to use it for regression tasks.

Study on direct dissolution of U-10Zr alloy and distribution of uranium and zirconium in liquid cadmium

International Nuclear Information System (INIS)

Ye Yuxing; Gao Yuan

1997-09-01

The effect of dissolution time, temperature, total surface area of U-10Zr alloy pellets and stirring on the dissolution and dissolution rate of uranium in liquid cadmium were studied. Cadmium containing U and Zr dissolved from U-10Zr alloy at 475 degree C and 500 degree C respectively was analyzed with electron microanalyzer. The experimental results show that at 400 degree and 500 degree C with the stirring rate of some 150 r/min, the solubilities of uranium in liquid cadmium are 0.4% and 2.2%, respectively. At the first 30 min, the dissolution rates of U-10Zr alloy pellets are 0.05 g/(cm 2 ·h) and 0.32 g/(cm 2 ·h), respectively. The suitable dissolution conditions for U-10Zr alloy pellets in liquid cadmium (the ratio of the mass of liquid cadmium to that of the pellets ≅7) are: temperature, about 480 degree C; stirring rate, about 150 r/min; dissolution time, 4 h. The distribution of uranium and zirconium in cadmium is homogeneous

The cat vertebral column: stance configuration and range of motion

Science.gov (United States)

Macpherson, J. M.; Ye, Y.; Peterson, B. W. (Principal Investigator)

1998-01-01

This study examined the configuration of the vertebral column of the cat during independent stance and in various flexed positions. The range of motion in the sagittal plane is similar across most thoracic and lumbar joints, with the exception of a lesser range at the transition region from thoracic-type to lumbar-type vertebrae. The upper thoracic column exhibits most of its range in dorsiflexion and the lower thoracic and lumbar in ventroflexion. Lateral flexion is limited to less than 5 degrees at all segments. The range in torsion is almost 180 degrees and occurs primarily in the midthoracic region, T4-T11. Contrary to the depiction in most atlases, the standing cat exhibits several curvatures, including a mild dorsiflexion in the lower lumbar segments, a marked ventroflexion in the lower thoracic and upper lumbar segments, and a profound dorsiflexion in the upper thoracic (above T9) and cervical segments. The curvatures are not significantly changed by altering stance distance but are affected by head posture. During stance, the top of the scapula lies well above the spines of the thoracic vertebrae, and the glenohumeral joint is just below the bodies of vertebrae T3-T5. Using a simple static model of the vertebral column in the sagittal plane, it was estimated that the bending moment due to gravity is bimodal with a dorsiflexion moment in the lower thoracic and lumbar region and a ventroflexion moment in the upper thoracic and cervical region. Given the bending moments and the position of the scapula during stance, it is proposed that two groups of scapular muscles provide the major antigravity support for the head and anterior trunk. Levator scapulae and serratus ventralis form the lateral group, inserting on the lateral processes of cervical vertebrae and on the ribs. The major and minor rhomboids form the medial group, inserting on the spinous tips of vertebrae from C4 to T4. It is also proposed that the hypaxial muscles, psoas major, minor, and quadratus

A web site for calculating the degree of chirality.

Science.gov (United States)

Zayit, Amir; Pinsky, Mark; Elgavi, Hadassah; Dryzun, Chaim; Avnir, David

2011-01-01

The web site, http://www.csm.huji.ac.il/, uses the Continuous Chirality Measure to evaluate quantitatively the degree of chirality of a molecule, a structure, a fragment. The value of this measure ranges from zero, the molecule is achiral, to higher values (the upper limit is 100); the higher the chirality value, the more chiral the molecule is. The measure is based on the distance between the chiral molecule and the nearest structure that is achiral. Questions such as the following can be addressed: by how much is one molecule more chiral than the other? how does chirality change along conformational motions? is there a correlation between chirality and enantioselectivity in a series of molecules? Both elementary and advanced features are offered. Related calculation options are the symmetry measures and shape measures. Copyright © 2009 Wiley-Liss, Inc.

46 CFR 72.15-10 - Vessels using fuel having a flashpoint of 110 degrees F. or lower.

Science.gov (United States)

2010-10-01

... to a maximum of 2,000 feet per minute. Ducts may be of any shape, provided that in no case shall 1....15-10(b), depending upon the size of the space. Table 72.15-10(b) Size of space, cubic feet Over Not...

Elastic Cube Actuator with Six Degrees of Freedom Output

Directory of Open Access Journals (Sweden)

Pengchuan Wang

2015-09-01

Full Text Available Unlike conventional rigid actuators, soft robotic technologies possess inherent compliance, so they can stretch and twist along every axis without the need for articulated joints. This compliance is exploited here using dielectric elastomer membranes to develop a novel six degrees of freedom (6-DOF polymer actuator that unifies ordinarily separate components into a simple cubic structure. This cube actuator design incorporates elastic dielectric elastomer membranes on four faces which are coupled by a cross-shaped end effector. The inherent elasticity of each membrane greatly reduces kinematic constraint and enables a 6-DOF actuation output to be produced via the end effector. An electro-mechanical model of the cube actuator is presented that captures the non-linear hyperelastic behaviour of the active membranes. It is demonstrated that the model accurately predicts actuator displacement and blocking moment for a range of input voltages. Experimental testing of a prototype 60 mm device demonstrates 6-DOF operation. The prototype produces maximum linear and rotational displacements of ±2.6 mm (±4.3% and ±4.8° respectively and a maximum blocking moment of ±76 mNm. The capacity for full 6-DOF actuation from a compact, readily scalable and easily fabricated polymeric package enables implementation in a range of mechatronics and robotics applications.

Maximizing the Spread of Influence via Generalized Degree Discount.

Science.gov (United States)

Wang, Xiaojie; Zhang, Xue; Zhao, Chengli; Yi, Dongyun

2016-01-01

It is a crucial and fundamental issue to identify a small subset of influential spreaders that can control the spreading process in networks. In previous studies, a degree-based heuristic called DegreeDiscount has been shown to effectively identify multiple influential spreaders and has severed as a benchmark method. However, the basic assumption of DegreeDiscount is not adequate, because it treats all the nodes equally without any differences. To consider a general situation in real world networks, a novel heuristic method named GeneralizedDegreeDiscount is proposed in this paper as an effective extension of original method. In our method, the status of a node is defined as a probability of not being influenced by any of its neighbors, and an index generalized discounted degree of one node is presented to measure the expected number of nodes it can influence. Then the spreaders are selected sequentially upon its generalized discounted degree in current network. Empirical experiments are conducted on four real networks, and the results show that the spreaders identified by our approach are more influential than several benchmark methods. Finally, we analyze the relationship between our method and three common degree-based methods.

Dirac's minimum degree condition restricted to claws

NARCIS (Netherlands)

Broersma, Haitze J.; Ryjacek, Z.; Schiermeyer, I.

1997-01-01

Let G be a graph on n 3 vertices. Dirac's minimum degree condition is the condition that all vertices of G have degree at least . This is a well-known sufficient condition for the existence of a Hamilton cycle in G. We give related sufficiency conditions for the existence of a Hamilton cycle or a