WorldWideScience

Sample records for randomly oriented wrought

  1. Metallographic Characterization of Wrought Depleted Uranium

    Energy Technology Data Exchange (ETDEWEB)

    Forsyth, Robert Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hill, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-14

    Metallographic characterization was performed on wrought depleted uranium (DU) samples taken from the longitudinal and transverse orientations from specific locations on two specimens. Characterization of the samples included general microstructure, inclusion analysis, grain size analysis, and microhardness testing. Comparisons of the characterization results were made to determine any differences based on specimen, sample orientation, or sample location. In addition, the characterization results for the wrought DU samples were also compared with data obtained from the metallographic characterization of cast DU samples previously characterized. No differences were observed in microstructure, inclusion size, morphology, and distribution, or grain size in regard to specimen, location, or orientation for the wrought depleted uranium samples. However, a small difference was observed in average hardness with regard to orientation at the same locations within the same specimen. The longitudinal samples were slightly harder than the transverse samples from the same location of the same specimen. This was true for both wrought DU specimens. Comparing the wrought DU sample data with the previously characterized cast DU sample data, distinct differences in microstructure, inclusion size, morphology and distribution, grain size, and microhardness were observed. As expected, the microstructure of the wrought DU samples consisted of small recrystallized grains which were uniform, randomly oriented, and equiaxed with minimal twinning observed in only a few grains. In contrast, the cast DU microstructure consisted of large irregularly shaped grains with extensive twinning observed in most grains. Inclusions in the wrought DU samples were elongated, broken and cracked and light and dark phases were observed in some inclusions. The mean inclusion area percentage for the wrought DU samples ranged from 0.08% to 0.34% and the average density from all wrought DU samples was 1.62E+04/cm

  2. Random walks of oriented particles on fractals

    International Nuclear Information System (INIS)

    Haber, René; Prehl, Janett; Hoffmann, Karl Heinz; Herrmann, Heiko

    2014-01-01

    Random walks of point particles on fractals exhibit subdiffusive behavior, where the anomalous diffusion exponent is smaller than one, and the corresponding random walk dimension is larger than two. This is due to the limited space available in fractal structures. Here, we endow the particles with an orientation and analyze their dynamics on fractal structures. In particular, we focus on the dynamical consequences of the interactions between the local surrounding fractal structure and the particle orientation, which are modeled using an appropriate move class. These interactions can lead to particles becoming temporarily or permanently stuck in parts of the structure. A surprising finding is that the random walk dimension is not affected by the orientation while the diffusion constant shows a variety of interesting and surprising features. (paper)

  3. Wetting morphologies on randomly oriented fibers.

    Science.gov (United States)

    Sauret, Alban; Boulogne, François; Soh, Beatrice; Dressaire, Emilie; Stone, Howard A

    2015-06-01

    We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Depending on the volume of liquid, the spacing distance between fibers and the angle between the fibers, we highlight that the liquid can adopt three different equilibrium morphologies: 1) a column morphology in which the liquid spreads between the fibers, 2) a mixed morphology where a drop grows at one end of the column or 3) a single drop located at the node. We capture the different morphologies observed using an analytical model that predicts the equilibrium configuration of the liquid based on the geometry of the fibers and the volume of liquid.

  4. Creep properties and microstructure of the new wrought austenitic steel

    Energy Technology Data Exchange (ETDEWEB)

    Vlasak, T.; Hakl, J.; Novak, P. [SVUM a.s., Prague (Czech Republic); Vyrostkova, A. [Slovak Academy of Sciences, Kosice (Slovakia). Inst. of Materials Research

    2010-07-01

    The contribution is oriented on the new wrought austenitic steel BGA4 (Cr23Ni15Mn6Cu3W1.5NbVMo) developed by the British Corus Company. Our main aim is to present creep properties studied in SVUM a.s. Prague during COST 536 programme. The dependencies of the creep strength, strength for specific creep strain and minimum creep strain rate were evaluated on the basis of long term creep tests carried out at temperature interval (625; 725) C. Important part of a paper is metallographic analysis. (orig.)

  5. Machine Learning and Infrared Thermography for Fiber Orientation Assessment on Randomly-Oriented Strands Parts

    Science.gov (United States)

    Maldague, Xavier

    2018-01-01

    The use of fiber reinforced materials such as randomly-oriented strands has grown in recent years, especially for manufacturing of aerospace composite structures. This growth is mainly due to their advantageous properties: they are lighter and more resistant to corrosion when compared to metals and are more easily shaped than continuous fiber composites. The resistance and stiffness of these materials are directly related to their fiber orientation. Thus, efficient approaches to assess their fiber orientation are in demand. In this paper, a non-destructive evaluation method is applied to assess the fiber orientation on laminates reinforced with randomly-oriented strands. More specifically, a method called pulsed thermal ellipsometry combined with an artificial neural network, a machine learning technique, is used in order to estimate the fiber orientation on the surface of inspected parts. Results showed that the method can be potentially used to inspect large areas with good accuracy and speed. PMID:29351240

  6. Machine Learning and Infrared Thermography for Fiber Orientation Assessment on Randomly-Oriented Strands Parts.

    Science.gov (United States)

    Fernandes, Henrique; Zhang, Hai; Figueiredo, Alisson; Malheiros, Fernando; Ignacio, Luis Henrique; Sfarra, Stefano; Ibarra-Castanedo, Clemente; Guimaraes, Gilmar; Maldague, Xavier

    2018-01-19

    The use of fiber reinforced materials such as randomly-oriented strands has grown in recent years, especially for manufacturing of aerospace composite structures. This growth is mainly due to their advantageous properties: they are lighter and more resistant to corrosion when compared to metals and are more easily shaped than continuous fiber composites. The resistance and stiffness of these materials are directly related to their fiber orientation. Thus, efficient approaches to assess their fiber orientation are in demand. In this paper, a non-destructive evaluation method is applied to assess the fiber orientation on laminates reinforced with randomly-oriented strands. More specifically, a method called pulsed thermal ellipsometry combined with an artificial neural network, a machine learning technique, is used in order to estimate the fiber orientation on the surface of inspected parts. Results showed that the method can be potentially used to inspect large areas with good accuracy and speed.

  7. Development of Wrought Superalloy in China

    Directory of Open Access Journals (Sweden)

    DU Jinhui

    2016-06-01

    Full Text Available Wrought superalloy development in China was reviewed in recent ten years. The achievement of basic research and development of industrial manufacture technologies were systematically described from the aspects of new alloys, new technologies of hot deformation. New alloys include: new disc materials 718Plus, GH4720Li and GH4065 alloy, combustion chamber alloy GH3230, and GH4706 alloy for gas turbine engines. New technologies include: ERS-CDS new technology of easy segregation materials, multi upsetting-drawing for improving the microstructure uniformity of bars, slow cooling and multi-cycle thermomechanical treatment for increasing hot plasticity of hard-to-work alloys. Finally, the further development of wrought superalloys was prospected.

  8. Deformation of wrought uranium: Experiments and modeling

    Energy Technology Data Exchange (ETDEWEB)

    McCabe, R.J., E-mail: rmccabe@lanl.gov [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Capolungo, L. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)] [UMI 2958 Georgia Tech - CNRS, 57070 Metz (France); Marshall, P.E.; Cady, C.M.; Tome, C.N. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2010-09-15

    The room temperature deformation behavior of wrought polycrystalline uranium is studied using a combination of experimental techniques and polycrystal modeling. Electron backscatter diffraction is used to analyze the primary deformation twinning modes for wrought alpha-uranium. The {l_brace}1 3 0{r_brace}<3 1 0> twinning mode is found to be the most prominent twinning mode, with minor contributions from the '{l_brace}1 7 2{r_brace}'<3 1 2> and {l_brace}1 1 2{r_brace}'<3 7 2>' twin modes. Because of the large number of deformation modes, each with limited deformation systems, a polycrystalline model is employed to identify and quantify the activity of each mode. Model predictions of the deformation behavior and texture development agree reasonably well with experimental measures and provide reliable information about deformation systems.

  9. Randomly oriented twin domains in electrodeposited silver dendrites

    Directory of Open Access Journals (Sweden)

    Ivanović Evica R.

    2015-01-01

    Full Text Available Silver dendrites were prepared by electrochemical deposition. The structures of Ag dendrites, the type of twins and their distribution were investigated by scanning electron microscopy (SEM, Z-contrast high angle annular dark field transmission electron microscopy (HAADF, and crystallografically sensitive orientation imaging microscopy (OIM. The results revealed that silver dendrites are characterized by the presence of randomly distributed 180° rotational twin domains. The broad surface of dendrites was of the {111} type. Growth directions of the main dendrite stem and all branches were of type. [Projekat Ministarstva nauke Republike Srbije, br. 172054

  10. Low temperature impact testing of welded structural wrought iron

    Science.gov (United States)

    Rogers, Zachary

    During the second half of the 19th century, structural wrought iron was commonly used in construction of bridges and other structures. Today, these remaining structures are still actively in use and may fall under the protection of historic preservation agencies. Continued use and protection leads to the need for inspection, maintenance, and repair of the wrought iron within these structures. Welding can be useful to achieve the appropriate repair, rehabilitation, or replacement of wrought iron members. There is currently very little published on modern welding techniques for historic wrought iron. There is also no pre-qualified method for this welding. The demand for welding in the repair of historic structural wrought iron has led to a line of research investigating shielded metal arc welding (SMAW) of historic wrought iron at the University of Colorado Denver. This prior research selected the weld type and other weld specifications to try and achieve a recognized specific welding procedure using modern SMAW technology and techniques. This thesis continues investigating SMAW of historic wrought iron. Specifically, this thesis addresses the toughness of these welds from analysis of the data collected from performing Charpy V-Notch (CVN) Impact Tests. Temperature was varied to observe the material response of the welds at low temperature. The wrought iron used in testing was from a historic vehicle bridge in Minnesota, USA. This area, and many other areas with wrought iron structures, can experience sustained or fluctuating temperatures far below freezing. Investigating the toughness of welds in historic wrought iron at these temperatures is necessary to fully understand material responses of the existing structures in need of maintenance and repair. It was shown that welded wrought iron is tougher and more ductile than non-welded wrought iron. In regards to toughness, welding is an acceptable repair method. Information on wrought iron, low temperature failure

  11. Texture evolution in upset-forged P/M and wrought tantalum: Experimentation and modeling

    International Nuclear Information System (INIS)

    Bingert, J.F.; Desch, P.B.; Bingert, S.R.; Maudlin, P.J.; Tome, C.N.

    1997-11-01

    Preferred orientations in polycrystalline materials can significantly affect their physical and mechanical response through the retention of anisotropic properties inherent to the single crystal. In this study the texture evolution in upset-forged PIM and wrought tantalum was measured as a function of initial texture, compressive strain, and relative position in the pressing. A / duplex fiber texture parallel to the compression axis was generally observed, with varying degrees of a radial component evident in the wrought material. The development of deformation textures derives from restricted crystallographic slip conditions that generate lattice rotations, and these grain reorientations can be modeled as a function of the prescribed deformation gradient. Texture development was simulated for equivalent deformations using both a modified Taylor approach and a viscoplastic self-consistent (VPSC) model. A comparison between the predicted evolution and experimental results shows a good correlation with the texture components, but an overly sharp prediction at large strains from both the Taylor and VPSC models

  12. Anomalous diffusion on 2d randomly oriented diode networks

    International Nuclear Information System (INIS)

    Aydiner, E.; Kiymach, K.

    2002-01-01

    In this work, we have studied the diffusion properties of a randomly oriented two- dimensional diode network, using Monte Carlo Simulation method. The characteristic exponent α of the diffusion is obtained against the reverse transition probability W γ . We have found two critical values of W γ ; 0.003 and 0.4. α has been found to be 0.376 for W γ ≤ 0.003, and ≅ 1 for W γ ≥ 0.4 . For W γ >0.4 normal diffusion, and for 0.003≤W γ ≤0.4 anomalous sub-diffusion are observed. But for W γ ≤0.003 there seems to be no diffusion at all

  13. Recent research and developments on wrought magnesium alloys

    Directory of Open Access Journals (Sweden)

    Sihang You

    2017-09-01

    Full Text Available Wrought magnesium alloys attract special interests as lightweight structural material due to their homogeneous microstructure and enhanced mechanical properties compared to as-cast alloys. In this contribution, recent research and developments on wrought magnesium alloys are reviewed from the viewpoint of the alloy design, focusing on Mg-Al, Mg-Zn and Mg-rare earth (RE systems. The effects of different alloying elements on the microstructure and mechanical properties are described considering their strengthening mechanisms, e.g. grain refinement, precipitation and texture hardening effect. Finally, the new alloy design and also the future research of wrought magnesium alloys to improve their mechanical properties are discussed.

  14. Corrosion Studies of Wrought and Cast NASA-23 Alloy

    Science.gov (United States)

    Danford, M. D.

    1997-01-01

    Corrosion studies were carried out for wrought and cast NASA-23 alloy using electrochemical methods. The scanning reference electrode technique (SRET), the polarization resistance technique (PR), and the electrochemical impedance spectroscopy (EIS) were employed. These studies corroborate the findings of stress corrosion studies performed earlier, in that the material is highly resistant to corrosion.

  15. Corrosion Properties of Sintered and Wrought Stainless Seel

    DEFF Research Database (Denmark)

    Mathiesen, Troels; Maahn, Ernst Emanuel

    1997-01-01

    The corrosion properties of a range of stainless steels produced by powder metallurgy (PM) are compared with wrought AISI304 and AISI316 Steel. Characterisation of the passivation properties in 0.5M H2SO4 and pittingresistance in 0.3% chloride solution by polarisation show properties...

  16. Standard practice for ultrasonic testing of wrought products

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2013-01-01

    1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products. Note 1—This standard was adopted to replace MIL-STD-2154, 30 Sept. 1982. This standard is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new, or different applications, or both. 1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products. 1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B 594. 1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified. 1.4 Ord...

  17. Microwave single-scattering properties of randomly oriented soft-ice hydrometeors

    Directory of Open Access Journals (Sweden)

    D. Casella

    2008-11-01

    Full Text Available Large ice hydrometeors are usually present in intense convective clouds and may significantly affect the upwelling radiances that are measured by satellite-borne microwave radiometers – especially, at millimeter-wavelength frequencies. Thus, interpretation of these measurements (e.g., for precipitation retrieval requires knowledge of the single scattering properties of ice particles. On the other hand, shape and internal structure of these particles (especially, the larger ones is very complex and variable, and therefore it is necessary to resort to simplifying assumptions in order to compute their single-scattering parameters.

    In this study, we use the discrete dipole approximation (DDA to compute the absorption and scattering efficiencies and the asymmetry factor of two kinds of quasi-spherical and non-homogeneous soft-ice particles in the frequency range 50–183 GHz. Particles of the first kind are modeled as quasi-spherical ice particles having randomly distributed spherical air inclusions. Particles of the second kind are modeled as random aggregates of ice spheres having random radii. In both cases, particle densities and dimensions are coherent with the snow hydrometeor category that is utilized by the University of Wisconsin – Non-hydrostatic Modeling System (UW-NMS cloud-mesoscale model. Then, we compare our single-scattering results for randomly-oriented soft-ice hydrometeors with corresponding ones that make use of: a effective-medium equivalent spheres, b solid-ice equivalent spheres, and c randomly-oriented aggregates of ice cylinders. Finally, we extend to our particles the scattering formulas that have been developed by other authors for randomly-oriented aggregates of ice cylinders.

  18. Macroscopic optical constants of a cloud of randomly oriented nonspherical scatterers

    International Nuclear Information System (INIS)

    Borghese, F.; Denti, P.; Saija, R.; Toscano, G.; Sindoni, O.I.

    1984-01-01

    A method to calculate the macroscopic optical constants of a low-density medium consisting of a cloud of identical nonspherical scatterers is presented. The scatterers in the medium are clusters of dielectric spheres and the electromagnetic field scattered by each of the clusters is obtained as a superposition of multipole fields, as previously proposed by the authors. The transformation properties of the spherical multipoles under rotation allow the orientation-dependent terms in the expression for the forward-scattering amplitude of each of the clusters to be factored out. In this way the sum of the scattering amplitudes of the clusters with different orientations, needed to calculate the optical response of the medium, is greatly facilitated and admits a simple analytic expression in the case of randomly oriented clusters. Results of calculations of the optical constants for a few model media are presented

  19. Graded index and randomly oriented core-shell silicon nanowires for broadband and wide angle antireflection

    Directory of Open Access Journals (Sweden)

    P. Pignalosa

    2011-09-01

    Full Text Available Antireflection with broadband and wide angle properties is important for a wide range of applications on photovoltaic cells and display. The SiOx shell layer provides a natural antireflection from air to the Si core absorption layer. In this work, we have demonstrated the random core-shell silicon nanowires with both broadband (from 400nm to 900nm and wide angle (from normal incidence to 60º antireflection characteristics within AM1.5 solar spectrum. The graded index structure from the randomly oriented core-shell (Air/SiOx/Si nanowires may provide a potential avenue to realize a broadband and wide angle antireflection layer.

  20. Distribution of orientation selectivity in recurrent networks of spiking neurons with different random topologies.

    Science.gov (United States)

    Sadeh, Sadra; Rotter, Stefan

    2014-01-01

    Neurons in the primary visual cortex are more or less selective for the orientation of a light bar used for stimulation. A broad distribution of individual grades of orientation selectivity has in fact been reported in all species. A possible reason for emergence of broad distributions is the recurrent network within which the stimulus is being processed. Here we compute the distribution of orientation selectivity in randomly connected model networks that are equipped with different spatial patterns of connectivity. We show that, for a wide variety of connectivity patterns, a linear theory based on firing rates accurately approximates the outcome of direct numerical simulations of networks of spiking neurons. Distance dependent connectivity in networks with a more biologically realistic structure does not compromise our linear analysis, as long as the linearized dynamics, and hence the uniform asynchronous irregular activity state, remain stable. We conclude that linear mechanisms of stimulus processing are indeed responsible for the emergence of orientation selectivity and its distribution in recurrent networks with functionally heterogeneous synaptic connectivity.

  1. Current distributions in superconducting wires subject to a random orientation magnetic field, and corresponding to the Tokamak usual conditions

    International Nuclear Information System (INIS)

    Artaud, J.F.

    1994-01-01

    The main themes of this thesis are: review of superconductivity principles; critical current in a random orientation magnetic field; the MHD model applied to superconductors (with comprehensive calculation of the field in a plate type conductor); the magnetization created by a variation of a random orientation magnetic field; the electric field in a superconductor in steady or quasi-steady state (MHD displacement, pinning and thermal effects). 145 figs., 166 refs

  2. Effect of NICU Department Orientation Program on Mother’s Anxiety: a Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    Leila Valizadeh

    2016-09-01

    Full Text Available Introduction: Neonatal intensive care unit induces the high level of anxiety for mothers. The aim of this study was to evaluate the effectiveness of NICU orientation program on the anxiety of mothers who had preterm newborns hospitalized in NICU. Methods: This study was a randomized clinical trial (three parallel groups. Participants included 99 mothers with preterm newborns hospitalized in NICU of Al- Zahra hospital, affiliated to Tabriz University of Medical Sciences in 2015. Mothers were randomly assigned to one of three groups (film, booklet, and control. Mothers completed the State- Trait Anxiety Inventory before entering to the NICU, and then mothers in the experiment groups became familiar with the NICU environment through watching a film or reading booklet. After the first NICU visit, all mothers completed the STAI and Cattell's Anxiety Questionnaires. Data were analyzed using SPSS ver. 13 software. Results: There was no significant difference between three groups regarding state- trait anxiety before the intervention. After the first NICU visit, a significant reduction in maternal state anxiety was seen in the both experiment groups. There was no statistical significant difference regarding trait anxiety. Data obtained from Cattell's anxiety questionnaire after intervention, showed significant difference in state anxiety between groups. Conclusion: Employing film and booklet orientation strategy after preterm delivery can reduce the mother’s anxiety and beneficent for the mother, baby, family and health care system.

  3. Performance of Novel Randomly Oriented High Graphene Carbon in Lithium Ion Capacitors

    Directory of Open Access Journals (Sweden)

    Rahul S. Kadam

    2018-01-01

    Full Text Available The structure of carbon material comprising the anode is the key to the performance of a lithium ion capacitor. In addition to determining the capacity, the structure of the carbon material also determines the diffusion rate of the lithium ion into the anode which in turn controls power density which is vital in high rate applications. This paper covers details of systematic investigation of the performance of a structurally novel carbon, called Randomly Oriented High Graphene (ROHG carbon, and graphite in a high rate application device, that is, lithium ion capacitor. Electrochemical impedance spectroscopy shows that ROHG is less resistive and has faster lithium ion diffusion rates (393.7 × 10−3 S·s(1/2 compared to graphite (338.1 × 10−3 S·s(1/2. The impedance spectroscopy data is supported by the cell data showing that the ROHG carbon based device has energy density of 22.8 Wh/l with a power density of 4349.3 W/l, whereas baseline graphite based device has energy density of 5 Wh/l and power density of 4243.3 W/l. This data clearly shows advantage of the randomly oriented graphene platelet structure of ROHG in lithium ion capacitor performance.

  4. Real-Space x-ray tomographic reconstruction of randomly oriented objects with sparse data frames.

    Science.gov (United States)

    Ayyer, Kartik; Philipp, Hugh T; Tate, Mark W; Elser, Veit; Gruner, Sol M

    2014-02-10

    Schemes for X-ray imaging single protein molecules using new x-ray sources, like x-ray free electron lasers (XFELs), require processing many frames of data that are obtained by taking temporally short snapshots of identical molecules, each with a random and unknown orientation. Due to the small size of the molecules and short exposure times, average signal levels of much less than 1 photon/pixel/frame are expected, much too low to be processed using standard methods. One approach to process the data is to use statistical methods developed in the EMC algorithm (Loh & Elser, Phys. Rev. E, 2009) which processes the data set as a whole. In this paper we apply this method to a real-space tomographic reconstruction using sparse frames of data (below 10(-2) photons/pixel/frame) obtained by performing x-ray transmission measurements of a low-contrast, randomly-oriented object. This extends the work by Philipp et al. (Optics Express, 2012) to three dimensions and is one step closer to the single molecule reconstruction problem.

  5. Photoionization cross-section for atomic orbitals with random and fixed spatial orientation

    International Nuclear Information System (INIS)

    Goldberg, S.M.; Fadley, C.S.; Kono, S.

    1981-01-01

    Atomic photoionization subshell cross-sections and asymmetry parameters necessary for determining the differential cross-sections of randomly-oriented atoms have been calculated within the one-electron, central-potential model and the dipole approximation for all subshells of C, O, Al, Si, S, Ni, Cu, Ga, Ge, As, Se, In, Sb, Cs, Ba, Ce, Ta, W, Pt, Au, and Pb for a photon energy range from 20 to 1500 eV, and the relevant Cooper minima located to within 10 eV. These values are tabulated for general use, together with the associated radial matrix elements and phase shifts. Differential photoionization cross-sections for fixed-orientation s-, p- and d-orbitals have also been derived within the same model for a completely general experimental geometry, and closed-form expressions depending on radial matrix elements and phase shifts are given. For the special geometry of a polarized excitation source with polarization parallel to the electron emission direction, it is further shown that such oriented-atom cross-sections are exactly proportional to the probability distribution of the initial orbital, a result equivalent to that derived by using a plane-wave final-state approximation. However, detailed numerical calculations of cross-sections for oriented Cu 3d and O 2p orbitals in various general geometries and at various energies exhibit significant differences in comparison to plane-wave cross-sections. By contrast, certain prior angular-resolved X-ray photoemission studies of single-crystal valence bands are found to have been carried out in an experimental geometry that fortuitously gave cross-sections close to the plane-wave predictions. (orig.)

  6. Guiding the orientation of smooth muscle cells on random and aligned polyurethane/collagen nanofibers.

    Science.gov (United States)

    Jia, Lin; Prabhakaran, Molamma P; Qin, Xiaohong; Ramakrishna, Seeram

    2014-09-01

    Fabricating scaffolds that can simulate the architecture and functionality of native extracellular matrix is a huge challenge in vascular tissue engineering. Various kinds of materials are engineered via nano-technological approaches to meet the current challenges in vascular tissue regeneration. During this study, nanofibers from pure polyurethane and hybrid polyurethane/collagen in two different morphologies (random and aligned) and in three different ratios of polyurethane:collagen (75:25; 50:50; 25:75) are fabricated by electrospinning. The fiber diameters of the nanofibrous scaffolds are in the range of 174-453 nm and 145-419 for random and aligned fibers, respectively, where they closely mimic the nanoscale dimensions of native extracellular matrix. The aligned polyurethane/collagen nanofibers expressed anisotropic wettability with mechanical properties which is suitable for regeneration of the artery. After 12 days of human aortic smooth muscle cells culture on different scaffolds, the proliferation of smooth muscle cells on hybrid polyurethane/collagen (3:1) nanofibers was 173% and 212% higher than on pure polyurethane scaffolds for random and aligned scaffolds, respectively. The results of cell morphology and protein staining showed that the aligned polyurethane/collagen (3:1) scaffold promote smooth muscle cells alignment through contact guidance, while the random polyurethane/collagen (3:1) also guided cell orientation most probably due to the inherent biochemical composition. Our studies demonstrate the potential of aligned and random polyurethane/collagen (3:1) as promising substrates for vascular tissue regeneration. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  7. Formability of a wrought Mg alloy evaluated by impression testing

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed, Walid; Gollapudi, Srikant; Charit, Indrajit; Murty, K. Linga

    2018-01-17

    This study is focused on furthering our understanding of the different factors that influence the formability of Magnesium alloys. Towards this end, formability studies were undertaken on a wrought Mg-2Zn-1Mn (ZM21) alloy. In contrast to conventional formability studies, the impression testing method was adopted here to evaluate the formability parameter, B, at temperatures ranging from 298 to 473 K. The variation of B of ZM21 with temperature and its rather limited values were discussed in the light of different deformation mechanisms such as activation of twinning, slip, grain boundary sliding (GBS) and dynamic recrystallization (DRX). It was found that the material characteristics such as grain size, texture and testing conditions such as temperature and strain rate, were key determinants of the mechanism of plastic deformation. A by-product of this analysis was the observation of an interesting correlation between the Zener-Hollomon parameter, Z, and the ability of Mg alloys to undergo DRX.

  8. Growth and structural discrimination of cortical neurons on randomly oriented and vertically aligned dense carbon nanotube networks

    Directory of Open Access Journals (Sweden)

    Christoph Nick

    2014-09-01

    Full Text Available The growth of cortical neurons on three dimensional structures of spatially defined (structured randomly oriented, as well as on vertically aligned, carbon nanotubes (CNT is studied. Cortical neurons are attracted towards both types of CNT nano-architectures. For both, neurons form clusters in close vicinity to the CNT structures whereupon the randomly oriented CNTs are more closely colonised than the CNT pillars. Neurons develop communication paths via neurites on both nanoarchitectures. These neuron cells attach preferentially on the CNT sidewalls of the vertically aligned CNT architecture instead than onto the tips of the individual CNT pillars.

  9. Influence of cerium on passivity behavior of wrought AZ91 alloy

    International Nuclear Information System (INIS)

    Wang Henan; Li Ying; Wang Fuhui

    2008-01-01

    In this paper, more focus had been put on the passivity behavior of wrought AZ91 alloy with 1.5 mass% Ce. The passive current density of wrought AZ91 alloy increased with addition of Ce and the passive film became unstable. Structures and compositions of the passive films formed on wrought AZ91 alloy without and with Ce in 0.01 M NaOH aqueous solution were analyzed by potentiostatic polarization, potentiostatic-galvanostatic (P-G) transient technique and X-ray photoelectron spectroscopy (XPS). The results showed that Ce only accumulated in the inner layer of passive film in the form of CeO 2 . Further analysis revealed that there were two main effects of Ce on the passive process of wrought AZ91 alloy: first, the existence of CeO 2 in inner layer of passive film made mass transport through the passive film follow tangent hyperbolic (T) impedance instead of Warburg impedance (W); second, donor concentration (N d ) of the passive film increased by a factor 10 when 1.5 mass% Ce existed in wrought AZ91 alloy, which led to the higher passivity current density

  10. Influence of crystal shapes on radiative fluxes in visible wavelength: ice crystals randomly oriented in space

    Directory of Open Access Journals (Sweden)

    P. Chervet

    1996-08-01

    Full Text Available Radiative properties of cirrus clouds are one of the major unsolved problems in climate studies and global radiation budget. These clouds are generally composed of various ice-crystal shapes, so we tried to evaluate effects of the ice-crystal shape on radiative fluxes. We calculated radiative fluxes of cirrus clouds with a constant geometrical depth, composed of ice crystals with different shapes (hexagonal columns, bullets, bullet-rosettes, sizes and various concentrations. We considered ice particles randomly oriented in space (3D case and their scattering phase functions were calculated by a ray-tracing method. We calculated radiative fluxes for cirrus layers for different microphysical characteristics by using a discrete-ordinate radiative code. Results showed that the foremost effect of the ice-crystal shape on radiative properties of cirrus clouds was that on the optical thickness, while the variation of the scattering phase function with the ice shape remained less than 3% for our computations. The ice-water content may be a better choice to parameterize the optical properties of cirrus, but the shape effect must be included.

  11. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms' Movements.

    Directory of Open Access Journals (Sweden)

    Sophie Bertrand

    Full Text Available How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD. GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS, both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1 providing a synthetic and pattern-oriented description of movement, (2 using top predators as ecosystem indicators and (3 studying the variability of spatial behaviour among species or among individuals with different personalities.

  12. Oriented Markov random field based dendritic spine segmentation for fluorescence microscopy images.

    Science.gov (United States)

    Cheng, Jie; Zhou, Xiaobo; Miller, Eric L; Alvarez, Veronica A; Sabatini, Bernardo L; Wong, Stephen T C

    2010-10-01

    Dendritic spines have been shown to be closely related to various functional properties of the neuron. Usually dendritic spines are manually labeled to analyze their morphological changes, which is very time-consuming and susceptible to operator bias, even with the assistance of computers. To deal with these issues, several methods have been recently proposed to automatically detect and measure the dendritic spines with little human interaction. However, problems such as degraded detection performance for images with larger pixel size (e.g. 0.125 μm/pixel instead of 0.08 μm/pixel) still exist in these methods. Moreover, the shapes of detected spines are also distorted. For example, the "necks" of some spines are missed. Here we present an oriented Markov random field (OMRF) based algorithm which improves spine detection as well as their geometric characterization. We begin with the identification of a region of interest (ROI) containing all the dendrites and spines to be analyzed. For this purpose, we introduce an adaptive procedure for identifying the image background. Next, the OMRF model is discussed within a statistical framework and the segmentation is solved as a maximum a posteriori estimation (MAP) problem, whose optimal solution is found by a knowledge-guided iterative conditional mode (KICM) algorithm. Compared with the existing algorithms, the proposed algorithm not only provides a more accurate representation of the spine shape, but also improves the detection performance by more than 50% with regard to reducing both the misses and false detection.

  13. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms' Movements.

    Science.gov (United States)

    Bertrand, Sophie; Joo, Rocío; Fablet, Ronan

    2015-01-01

    How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW) models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD). GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS), both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1) providing a synthetic and pattern-oriented description of movement, (2) using top predators as ecosystem indicators and (3) studying the variability of spatial behaviour among species or among individuals with different personalities.

  14. Bilateral robotic priming before task-oriented approach in subacute stroke rehabilitation: a pilot randomized controlled trial.

    Science.gov (United States)

    Hsieh, Yu-Wei; Wu, Ching-Yi; Wang, Wei-En; Lin, Keh-Chung; Chang, Ku-Chou; Chen, Chih-Chi; Liu, Chien-Ting

    2017-02-01

    To investigate the treatment effects of bilateral robotic priming combined with the task-oriented approach on motor impairment, disability, daily function, and quality of life in patients with subacute stroke. A randomized controlled trial. Occupational therapy clinics in medical centers. Thirty-one subacute stroke patients were recruited. Participants were randomly assigned to receive bilateral priming combined with the task-oriented approach (i.e., primed group) or to the task-oriented approach alone (i.e., unprimed group) for 90 minutes/day, 5 days/week for 4 weeks. The primed group began with the bilateral priming technique by using a bimanual robot-aided device. Motor impairments were assessed by the Fugal-Meyer Assessment, grip strength, and the Box and Block Test. Disability and daily function were measured by the modified Rankin Scale, the Functional Independence Measure, and actigraphy. Quality of life was examined by the Stroke Impact Scale. The primed and unprimed groups improved significantly on most outcomes over time. The primed group demonstrated significantly better improvement on the Stroke Impact Scale strength subscale ( p = 0.012) and a trend for greater improvement on the modified Rankin Scale ( p = 0.065) than the unprimed group. Bilateral priming combined with the task-oriented approach elicited more improvements in self-reported strength and disability degrees than the task-oriented approach by itself. Further large-scale research with at least 31 participants in each intervention group is suggested to confirm the study findings.

  15. Method and alloys for fabricating wrought components for high-temperature gas-cooled reactors

    International Nuclear Information System (INIS)

    Thompson, L.D.; Johnson, W.R.

    1983-01-01

    Wrought, nickel-based alloys, suitable for components of a high-temperature gas-cooled reactor exhibit strength and excellent resistance to carburization at elevated temperatures and include aluminum and titanium in amounts and ratios to promote the growth of carburization resistant films while preserving the wrought character of the alloys. These alloys also include substantial amounts of molybdenum and/or tungsten as solid-solution strengtheners. Chromium may be included in concentrations less than 10% to assist in fabrication. Minor amounts of carbon and one or more carbide-forming metals also contribute to high-temperature strength. The range of compositions of these alloys is given. (author)

  16. Hindrance Velocity Model for Phase Segregation in Suspensions of Poly-dispersed Randomly Oriented Spheroids

    Science.gov (United States)

    Faroughi, S. A.; Huber, C.

    2015-12-01

    Crystal settling and bubbles migration in magmas have significant effects on the physical and chemical evolution of magmas. The rate of phase segregation is controlled by the force balance that governs the migration of particles suspended in the melt. The relative velocity of a single particle or bubble in a quiescent infinite fluid (melt) is well characterized; however, the interplay between particles or bubbles in suspensions and emulsions and its effect on their settling/rising velocity remains poorly quantified. We propose a theoretical model for the hindered velocity of non-Brownian emulsions of nondeformable droplets, and suspensions of spherical solid particles in the creeping flow regime. The model is based on three sets of hydrodynamic corrections: two on the drag coefficient experienced by each particle to account for both return flow and Smoluchowski effects and a correction on the mixture rheology to account for nonlocal interactions between particles. The model is then extended for mono-disperse non-spherical solid particles that are randomly oriented. The non-spherical particles are idealized as spheroids and characterized by their aspect ratio. The poly-disperse nature of natural suspensions is then taken into consideration by introducing an effective volume fraction of particles for each class of mono-disperse particles sizes. Our model is tested against new and published experimental data over a wide range of particle volume fraction and viscosity ratios between the constituents of dispersions. We find an excellent agreement between our model and experiments. We also show two significant applications for our model: (1) We demonstrate that hindered settling can increase mineral residence time by up to an order of magnitude in convecting magma chambers. (2) We provide a model to correct for particle interactions in the conventional hydrometer test to estimate the particle size distribution in soils. Our model offers a greatly improved agreement with

  17. A Randomized Trial to Measure the Efficacy of Applying Task Oriented Role Assignment to Improve Neonatal Resuscitation

    Science.gov (United States)

    2017-05-06

    In an effort to address performance gaps we devised a teaching paradigm, called Task-Oriented Role Ass ignment’, in which we have delegated a...task delegation , thereby improving NRP performance. Health care professionals taking the NRP course were randomized to either the control group, which...such as leadership (mean = 4· control, s study; p = 0.05). However, both groups scored similarly in overall NRP task performance with mean scores of

  18. Semi-solid near-net shape rheocasting of heat treatable wrought aluminum alloys

    CSIR Research Space (South Africa)

    Curle, UA

    2010-09-01

    Full Text Available Flexibility of the CSIR-RCS, induction stirring with simultaneous air cooling process, in combination with high pressure die casting is successfully demonstrated by semi-solid rheocasting of plates performed on commercial 2024, 6082 and 7075 wrought...

  19. Dynamic compressive response of wrought and additive manufactured 304L stainless steels

    Directory of Open Access Journals (Sweden)

    Nishida Erik

    2015-01-01

    Full Text Available Additive manufacturing (AM technology has been developed to fabricate metal components that include complex prototype fabrication, small lot production, precision repair or feature addition, and tooling. However, the mechanical response of the AM materials is a concern to meet requirements for specific applications. Differences between AM materials as compared to wrought materials might be expected, due to possible differences in porosity (voids, grain size, and residual stress levels. When the AM materials are designed for impact applications, the dynamic mechanical properties in both compression and tension need to be fully characterized and understood for reliable designs. In this study, a 304L stainless steel was manufactured with AM technology. For comparison purposes, both the AM and wrought 304L stainless steels were dynamically characterized in compression Kolsky bar techniques. They dynamic compressive stress-strain curves were obtained and the strain rate effects were determined for both the AM and wrought 304L stainless steels. A comprehensive comparison of dynamic compressive response between the AM and wrought 304L stainless steels was performed. SAND2015-0993 C.

  20. Comparison of the heat treatment response of wrought and SSM-HPDC alloy 6082

    CSIR Research Space (South Africa)

    Möller, H

    2011-06-01

    Full Text Available The natural and artificial aging responses of wrought and SSM-HPDC alloy 6082 are compared. It is shown that the heat treatment response of this Al-Mg-Si alloy is not influenced by differences in microstructures produced by different processing...

  1. Task-Oriented Training with Computer Games for People with Rheumatoid Arthritis or Hand Osteoarthritis: A Feasibility Randomized Controlled Trial.

    Science.gov (United States)

    Srikesavan, Cynthia Swarnalatha; Shay, Barbara; Szturm, Tony

    2016-09-13

    To examine the feasibility of a clinical trial on a novel, home-based task-oriented training with conventional hand exercises in people with rheumatoid arthritis or hand osteoarthritis. To explore the experiences of participants who completed their respective home exercise programmes. Thirty volunteer participants aged between 30 and 60 years and diagnosed with rheumatoid arthritis or hand osteoarthritis were proposed for a single-center, assessor-blinded, randomized controlled trial ( ClinicalTrials.gov : NCT01635582). Participants received task-oriented training with interactive computer games and objects of daily life or finger mobility and strengthening exercises. Both programmes were home based and were done four sessions per week with 20 minutes each session for 6 weeks. Major feasibility outcomes were number of volunteers screened, randomized, and retained; completion of blinded assessments, exercise training, and home exercise sessions; equipment and data management; and clinical outcomes of hand function. Reaching the recruitment target in 18 months and achieving exercise compliance >80% were set as success criteria. Concurrent with the trial, focus group interviews explored experiences of those participants who completed their respective programmes. After trial initiation, revisions in inclusion criteria were required to promote recruitment. A total of 17 participants were randomized and 15 were retained. Completion of assessments, exercise training, and home exercise sessions; equipment and data collection and management demonstrated excellent feasibility. Both groups improved in hand function outcomes and exercise compliance was above 85%. Participants perceived both programmes as appropriate and acceptable. Participants who completed task-oriented training also agreed that playing different computer games was enjoyable, engaging, and motivating. Findings demonstrate initial evidence on recruitment, feasibility of trial procedures, and acceptability of

  2. Do Savings Mediate Changes in Adolescents' Future Orientation and Health-Related Outcomes? Findings From Randomized Experiment in Uganda.

    Science.gov (United States)

    Karimli, Leyla; Ssewamala, Fred M

    2015-10-01

    This present study tests the proposition that an economic strengthening intervention for families caring for AIDS-orphaned adolescents would positively affect adolescent future orientation and psychosocial outcomes through increased asset accumulation (in this case, by increasing family savings). Using longitudinal data from the cluster-randomized experiment, we ran generalized estimating equation models with robust standard errors clustering on individual observations. To examine whether family savings mediate the effect of the intervention on adolescents' future orientation and psychosocial outcomes, analyses were conducted in three steps: (1) testing the effect of intervention on mediator; (2) testing the effect of mediator on outcomes, controlling for the intervention; and (3) testing the significance of mediating effect using Sobel-Goodman method. Asymmetric confidence intervals for mediated effect were obtained through bootstrapping-to address the assumption of normal distribution. Results indicate that participation in a matched Child Savings Account (CSA) program improved adolescents' future orientation and psychosocial outcomes by reducing hopelessness, enhancing self-concept, and improving adolescents' confidence about their educational plans. However, the positive intervention effect on adolescent future orientation and psychosocial outcomes was not transmitted through saving. In other words, participation in the matched CSA program improved adolescent future orientation and psychosocial outcomes regardless of its impact on reported savings. Further research is necessary to understand exactly how participation in economic strengthening interventions, for example, those that employ matched CSAs, shape adolescent future orientation and psychosocial outcomes: what, if not savings, transmits the treatment effect and how? Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  3. A Novel Screen for Suppressors of Breast Tumor Cell Growth Using an Oriented Random Peptide Library Method to Identify Inhibitors of the ErbB2 Tyrosine Kinase

    National Research Council Canada - National Science Library

    Carraway, Kermit

    1998-01-01

    .... To identify potential antagonists, the extracellular ligand binding domain of the ErbB2 is immobilized on a column support, and used to affinity purify cyclic peptides from oriented random peptide libraries...

  4. A Novel Screen for Suppressors of Breast Tumor Cell Growth Using an Oriented Random Peptide Library Method to Identify Inhibitors of the ErbB2 Tyrosine Kinase

    National Research Council Canada - National Science Library

    Carraway, Kermit

    1999-01-01

    .... To identify potential antagonists, the extracellular ligand binding domain of the ErbB2 is immobilized on a column support, and used to affinity purify cyclic peptides from oriented random peptide libraries...

  5. Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

    International Nuclear Information System (INIS)

    Alavudeen, A.; Rajini, N.; Karthikeyan, S.; Thiruchitrambalam, M.; Venkateshwaren, N.

    2015-01-01

    Highlights: • This paper is presents the fabrications of kenaf/banana fiber hybrid composites. • Effect of weaving pattern and random orientation on mechanical properties was studied. • Role of interfacial adhesion due to chemical modifications were analyzed with the aid of SEM. • Hybridization of kenaf and banana fibers in plain woven composites exhibits maximum mechanical strength. - Abstract: The present work deals with the effect of weaving patterns and random orientatation on the mechanical properties of banana, kenaf and banana/kenaf fiber-reinforced hybrid polyester composites. Composites were prepared using the hand lay-up method with two different weaving patterns, namely, plain and twill type. Of the two weaving patterns, the plain type showed improved tensile properties compared to the twill type in all the fabricated composites. Furthermore, the maximum increase in mechanical strength was observed in the plain woven hybrid composites rather than in randomly oriented composites. This indicates minimum stress development at the interface of composites due to the distribution of load transfer along the fiber direction. Moreover, alkali (NaOH) and sodium lauryl sulfate (SLS) treatments appear to provide an additional improvement in mechanical strength through enhanced interfacial bonding. Morphological studies of fractured mechanical testing samples were performed by scanning electron microscopy (SEM) to understand the de-bonding of fiber/matrix adhesion

  6. The Influence of Coping-oriented Hypnotic Suggestions on Chronic Pain in Patients with Spinal Cord Injury (SCI): A Randomized Controlled Study

    DEFF Research Database (Denmark)

    Knudsen, Lone; Kjøgx, Heidi; Kasch, Helge

    -hypnosis is unknown. The aim is to investigate the effect of coping-oriented hypnotic suggestions on chronic pain post-hypnosis. Methods: Seventy-five SCI-patients with chronic pain (>3, NRS 0-10) are randomized into one of three conditions; 1) coping-oriented hypnosis plus current treatment, 2) neutral hypnosis plus...

  7. Effects of Coping-Oriented Couples Therapy on Depression: A Randomized Clinical Trial

    Science.gov (United States)

    Bodenmann, Guy; Plancherel, Bernard; Beach, Steven R. H.; Widmer, Kathrin; Gabriel, Barbara; Meuwly, Nathalie; Charvoz, Linda; Hautzinger, Martin; Schramm, Elisabeth

    2008-01-01

    The aim of this study was to evaluate the effectiveness of treating depression with coping-oriented couples therapy (COCT) as compared with cognitive-behavioral therapy (CBT; A. T. Beck, C. Ward, & M. Mendelson, 1961) and interpersonal psychotherapy (IPT; M. M. Weissman, J. C. Markowitz, & G. L. Klerman, 2000). Sixty couples, including 1…

  8. Random Pattern Vertically Oriented, Partial Thickness Buccinator Myomucosal Flap for Intraoral Reconstruction: A Report of Two Cases

    Directory of Open Access Journals (Sweden)

    Amin Rahpeyma

    2016-05-01

    Full Text Available Introduction: Reconstruction of the oral cavity witha flap design containing the buccal mucosa and buccinator muscle but excluding the facial artery and vein is the topic of these case reports. Case Reports: This article uses random pattern vertically oriented partial thickness buccinator myomucosal flap for intraoral reconstruction in two cases. The first was for lining the mandibular anterior vestibule in a trauma patient. The second was for oral side coverage of bone graft in special cleft patient. In both patients, this flap survived and good bone coverage with non-keratinized mucosa was obtained. Conclusion:  Thin long buccal myomucosal flap not including facial artery and vein can survive.

  9. Shape dependency of the extinction and absorption cross sections of dust aerosols modeled as randomly oriented spheroids

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2011-09-01

    Full Text Available We present computational results on the shape dependency of the extinction and absorption cross sections of dustlike aerosol particles that were modeled as randomly oriented spheroids. Shape dependent variations in the extinction cross sections are largest in the size regime that is governed by the interference structure. Elongated spheroids best fitted measured extinction spectra of re-dispersed Saharan dust samples. For dust particles smaller than 1.5 μm in diameter and low absorption potential, shape effects on the absorption cross sections are very small.

  10. Multi-step wrought processing of TiAl-based alloys

    International Nuclear Information System (INIS)

    Fuchs, G.E.

    1997-04-01

    Wrought processing will likely be needed for fabrication of a variety of TiAl-based alloy structural components. Laboratory and development work has usually relied on one-step forging to produce test material. Attempts to scale-up TiAl-based alloy processing has indicated that multi-step wrought processing is necessary. The purpose of this study was to examine potential multi-step processing routes, such as two-step isothermal forging and extrusion + isothermal forging. The effects of processing (I/M versus P/M), intermediate recrystallization heat treatments and processing route on the tensile and creep properties of Ti-48Al-2Nb-2Cr alloys were examined. The results of the testing were then compared to samples from the same heats of materials processed by one-step routes. Finally, by evaluating the effect of processing on microstructure and properties, optimized and potentially lower cost processing routes could be identified

  11. Analysis of the potential for new automotive uses of wrought magnesium

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.; Cuenca, R.; Wu, S. [Argonne National Lab., IL (United States); Stodolsky, F. [Argonne National Lab., IL (United States)]|[Argonne National Lab., Washington, DC (United States)

    1996-02-01

    The Center for Transportation Research at Argonne National Laboratory has performed a study for the Lightweight Materials Program within the US Department of Energy`s Office of Transportation Materials to evaluate the suitability of wrought magnesium and its alloys to replace steel or aluminum for automotive structural and sheet applications. Vehicle weight reduction is one of the major means available for improving automotive fuel efficiency. Although high-strength steels, Al, and polymers are already being used to achieve significant weight reductions, substantial additional weight reductions could be achieved by increased use of Mg (whose density is less than one-fourth that of steel and only two-thirds that of Al). This study shows that Mg sheet could be used in automotive body nonstructural and semistructural applications, whereas extrusions could be used in such structural applications as spaceframes. The primary barrier to such uses of wrought Mg is high cost.

  12. A Short review on wrought austenitic stainless steels at high temperatures: processing, microstructure, properties and performance

    Directory of Open Access Journals (Sweden)

    Ronald Lesley Plaut

    2007-12-01

    Full Text Available Wrought austenitic stainless steels are widely used in high temperature applications. This short review discusses initially the processing of this class of steels, with emphasis on solidification and hot working behavior. Following, a brief summary is made on the precipitation behavior and the numerous phases that may appear in their microstructures. Creep and oxidation resistance are, then, briefly discussed, and finalizing their performance is compared with other high temperature metallic materials.

  13. Analysis and modeling of resistive switching mechanisms oriented to resistive random-access memory

    International Nuclear Information System (INIS)

    Huang Da; Wu Jun-Jie; Tang Yu-Hua

    2013-01-01

    With the progress of the semiconductor industry, the resistive random-access memory (RAM) has drawn increasing attention. The discovery of the memristor has brought much attention to this study. Research has focused on the resistive switching characteristics of different materials and the analysis of resistive switching mechanisms. We discuss the resistive switching mechanisms of different materials in this paper and analyze the differences of those mechanisms from the view point of circuitry to establish their respective circuit models. Finally, simulations are presented. We give the prospect of using different materials in resistive RAM on account of their resistive switching mechanisms, which are applied to explain their resistive switchings

  14. Mindfulness-Oriented Recovery Enhancement for Internet Gaming Disorder in U.S. Adults: A Stage 1 Randomized Controlled Trial

    Science.gov (United States)

    Li, Wen; Garland, Eric L.; McGovern, Patricia; O'Brien, Jennifer E.; Tronnier, Christine; Howard, Matthew O.

    2017-01-01

    Empirical studies have identified increasing rates of Internet Gaming Disorder (IGD) and associated adverse consequences. However, very few evidence-based interventions have been evaluated for IGD or problematic video gaming behaviors. This study evaluated Mindfulness-Oriented Recovery Enhancement (MORE) as a treatment for IGD. Thirty adults (M age = 25.0, SD = 5.4) with IGD or problematic video gaming behaviors were randomized to 8 weeks of group-based MORE or 8 weeks of a support group (SG) control condition. Outcome measures were administered at pre-and posttreatment, and 3-month following treatment completion using self-report instruments. Linear mixed models were used for outcome analyses. MORE participants had significantly greater reductions in the number of DSM-5 IGD criteria they met, craving for video gaming, and maladaptive cognitions associated with gaming than SG participants, and therapeutic benefits were maintained at 3-month follow-up. MORE is a promising treatment approach for IGD. PMID:28437120

  15. Highly efficient hybrid energy generator: coupled organic photovoltaic device and randomly oriented electrospun poly(vinylidene fluoride) nanofiber.

    Science.gov (United States)

    Park, Boongik; Lee, Kihwan; Park, Jongjin; Kim, Jongmin; Kim, Ohyun

    2013-03-01

    A hybrid architecture consisting of an inverted organic photovoltaic device and a randomly-oriented electrospun PVDF piezoelectric device was fabricated as a highly-efficient energy generator. It uses the inverted photovoltaic device with coupled electrospun PVDF nanofibers as tandem structure to convert solar and mechanical vibrations energy to electricity simultaneously or individually. The power conversion efficiency of the photovoltaic device was also significantly improved up to 4.72% by optimized processes such as intrinsic ZnO, MoO3 and active layer. A simple electrospinning method with the two electrode technique was adopted to achieve a high voltage of - 300 mV in PVDF piezoelectric fibers. Highly-efficient HEG using voltage adder circuit provides the conceptual possibility of realizing multi-functional energy generator whenever and wherever various energy sources are available.

  16. Random oriented hexagonal nickel hydroxide nanoplates grown on graphene as binder free anode for lithium ion battery with high capacity

    Science.gov (United States)

    Du, Yingjie; Ma, Hu; Guo, Mingxuan; Gao, Tie; Li, Haibo

    2018-05-01

    In this work, two-step method has been employed to prepare random oriented hexagonal hydroxide nanoplates on graphene (Ni(OH)2@G) as binder free anode for lithium ion battery (LIB) with high capacity. The morphology, microstructure, crystal phase and elemental bonding have been characterized. When evaluated as anode for LIB, the Ni(OH)2@G exhibited high initial discharge capacity of 1318 mAh/g at the current density of 50 mA/g. After 80 cycles, the capacity was maintained at 834 mAh/g, implying 63.3% remaining. Even the charge rate was increased to 2000 mA/g, an impressive capacity of 141 mAh/g can be obtained, indicating good rate capability. The superior LIB behavior of Ni(OH)2@G is ascribed to the excellent combination between Ni(OH)2 nanoplates and graphene via both covalent chemical bonding and van der Waals interactions.

  17. Comparison of antiemetic efficacy of granisetron and ondansetron in Oriental patients: a randomized crossover study.

    Science.gov (United States)

    Poon, R. T.; Chow, L. W.

    1998-01-01

    A double-blind randomized crossover trial was performed to compare the antiemetic efficacy of two 5-HT3 receptor antagonists, granisetron and ondansetron, in Chinese patients receiving adjuvant chemotherapy (cyclophosphamide, methotrexate and 5-fluorouracil) for breast cancer. Twenty patients were randomized to receive chemotherapy with either granisetron on day 1 and ondansetron on day 8 of the first cycle followed by the reverse order in the second cycle, or vice versa. The number of vomiting episodes and the severity of nausea in the first 24 h (acute vomiting/nausea) and the following 7 days (delayed vomiting/nausea) were studied. Acute vomiting was completely prevented in 29 (72.5%) cycles with granisetron and 27 (67.5%) cycles with ondansetron, and treatment failure (>5 vomiting episodes) occurred in two (5%) cycles with each agent (P = NS). Acute nausea was completely controlled in 15 (37.5%) cycles with granisetron and 14 (35%) cycles with ondansetron, whereas severe acute nausea occurred in four (10%) cycles with each agent (P = NS). However, complete response for delayed vomiting was observed in only 21 (52.5%) cycles with granisetron and 22 (55%) cycles with ondansetron (P = NS), and delayed nausea was completely controlled in only 11 (27.5%) and ten (25%) cycles respectively (P = NS). In conclusion, both granisetron and ondansetron are effective in controlling acute nausea and vomiting in Chinese patients, with equivalent antiemetic efficacy. Control of delayed nausea and vomiting is less satisfactory. PMID:9635849

  18. Mechanical properties of unidirectional and randomly oriented kenaf bast fibre composites using polypropylene resin matrix

    International Nuclear Information System (INIS)

    Sharifah Hanisah Syed Abd Aziz; Khairul Zaman Mohd Dahlan

    2004-01-01

    Fibres are known to confer strength and rigidity to the weak and brittle matrix and currently, research in composite materials is being directed at using natural fibers instead of synthetic fibres. In this work long and random kenaf fibers were used in the as-received condition and alkalized with a 0.06M NaOH solution. They were combined with polypropylene thin sheets and hot-pressed to form natural fibre composites. The mechanical properties of the composites were investigated to observe the effect of fibre alignment, fibre treatment, and the method of moulding technique used. A general trend was observed whereby alkalized and long fibre composites give higher flexural modulus and flexural strength compared with random mat and untreated fibres. The long fibre composites also gave a higher work of fracture. However, the correlation between fibre surface treatment and the work of fracture was less clear. The method of moulding used also need to be improved to optimize the performance of the composites manufactured as the overall mechanical test result showed some irregularities. Pre-irradiation on the polypropylene pellets before the composite is manufactured will be considered as one of the mechanism in enhancing the mechanical performance of the composites in future work. (Author)

  19. Resource-oriented coaching for reduction of examination-related stress in medical students: an exploratory randomized controlled trial.

    Science.gov (United States)

    Kötter, Thomas; Niebuhr, Frank

    2016-01-01

    The years spent in acquiring medical education is considered a stressful period in the life of many students. Students whose mental health deteriorates during this long period of study are less likely to become empathic and productive physicians. In addition to other specific stressors, academic examinations seem to further induce medical school-related stress and anxiety. Combined group and individual resource-oriented coaching early in medical education might reduce examination-related stress and anxiety and, consequently, enhance academic performance. Good quality evidence, however, remains scarce. In this study, therefore, we explored the question of whether coaching affects examination-related stress and health in medical students. We conducted a randomized controlled trial. Students who registered for the first medical academic examination in August 2014 at the University of Lübeck were recruited and randomized into three groups. The intervention groups 1 and 2 received a 1-hour psychoeducative seminar. Group 1 additionally received two 1-hour sessions of individual coaching during examination preparation. Group 3 served as a control group. We compared changes in self-rated general health (measured by a single item), anxiety and depression (measured by the hospital anxiety and depression scale), as well as medical school stress (measured by the perceived medical school stress instrument). In order to further investigate the influence of group allocation on perceived medical school stress, we conducted a linear regression analysis. We saw a significant deterioration of general health and an increase in anxiety and depression scores in medical students while preparing for an examination. We found a small, but statistically significant, effect of group allocation on the development of perceived medical school stress. However, we could not differentiate between the effects of group coaching only and group coaching in combination with two sessions of individual

  20. Structural and magnetic properties of Co films on highly textured and randomly oriented C_6_0 layers

    International Nuclear Information System (INIS)

    Kim, Dong-Ok; Choi, Jun Woo; Lee, Dong Ryeol

    2016-01-01

    The structural and magnetic properties of Co/C_6_0/pentacene and Co/C_6_0 thin film structures were investigated. Atomic force microscopy and x-ray reflectivity analysis show that the presence or absence of a pentacene buffer layer leads to a highly textured or randomly oriented C_6_0 layer, respectively. A Co film deposited on a randomly oriented C_6_0 layer penetrates into the C_6_0 layer when it is deposited at a slow deposition rate. The Co penetration can be minimized, regardless of the Co deposition rate, by growth on a highly textured and nanostructured C_6_0/pentacene layer. Vibrating sample magnetometry measurements show that the saturation magnetization of Co/C_6_0/pentacene is significantly reduced compared to that of Co/C_6_0. On the other hand, the Co penetration does not seem to have an effect on the magnetic properties, suggesting that the structural properties of the Co and C_6_0 layer, rather than the Co penetration into the organic C_6_0 layer, are critical to the magnetic properties of the Co/C_6_0. - Highlights: • Structural and magnetic properties of metal(Co)-organic(C_6_0) interface is studied. • Highly textured C_6_0 layer was grown on a pentacene buffer layer (C_6_0/pentacene). • Co penetration into the C_6_0 is significantly suppressed in Co/C_6_0/pentacene. • The Co magnetization in Co/C_6_0/pentacene is reduced than that in Co/C_6_0.

  1. Structural and magnetic properties of Co films on highly textured and randomly oriented C{sub 60} layers

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong-Ok [Department of Physics, Soongsil University, Seoul 156-743 (Korea, Republic of); Choi, Jun Woo, E-mail: junwoo@kist.re.kr [Center for Spintronics Research, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Lee, Dong Ryeol, E-mail: drlee@ssu.ac.kr [Department of Physics, Soongsil University, Seoul 156-743 (Korea, Republic of)

    2016-03-01

    The structural and magnetic properties of Co/C{sub 60}/pentacene and Co/C{sub 60} thin film structures were investigated. Atomic force microscopy and x-ray reflectivity analysis show that the presence or absence of a pentacene buffer layer leads to a highly textured or randomly oriented C{sub 60} layer, respectively. A Co film deposited on a randomly oriented C{sub 60} layer penetrates into the C{sub 60} layer when it is deposited at a slow deposition rate. The Co penetration can be minimized, regardless of the Co deposition rate, by growth on a highly textured and nanostructured C{sub 60}/pentacene layer. Vibrating sample magnetometry measurements show that the saturation magnetization of Co/C{sub 60}/pentacene is significantly reduced compared to that of Co/C{sub 60}. On the other hand, the Co penetration does not seem to have an effect on the magnetic properties, suggesting that the structural properties of the Co and C{sub 60} layer, rather than the Co penetration into the organic C{sub 60} layer, are critical to the magnetic properties of the Co/C{sub 60}. - Highlights: • Structural and magnetic properties of metal(Co)-organic(C{sub 60}) interface is studied. • Highly textured C{sub 60} layer was grown on a pentacene buffer layer (C{sub 60}/pentacene). • Co penetration into the C{sub 60} is significantly suppressed in Co/C{sub 60}/pentacene. • The Co magnetization in Co/C{sub 60}/pentacene is reduced than that in Co/C{sub 60}.

  2. Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Najib Souissi

    2014-04-01

    Full Text Available This study applies the Taguchi method to investigate the relationship between the ultimate tensile strength, hardness and process variables in a squeeze casting 2017 A wrought aluminium alloy. The effects of various casting parameters including squeeze pressure, melt temperature and die temperature were studied. Therefore, the objectives of the Taguchi method for the squeeze casting process are to establish the optimal combination of process parameters and to reduce the variation in quality between only a few experiments. The experimental results show that the squeeze pressure significantly affects the microstructure and the mechanical properties of 2017 A Al alloy.

  3. Assessment of wrought ASTM F1058 cobalt alloy properties for permanent surgical implants.

    Science.gov (United States)

    Clerc, C O; Jedwab, M R; Mayer, D W; Thompson, P J; Stinson, J S

    1997-01-01

    The behavior of the ASTM F1058 wrought cobalt-chromium-nickel-molybdenum-iron alloy (commonly referred to as Elgiloy or Phynox) is evaluated in terms of mechanical properties, magnetic resonance imaging, corrosion resistance, and biocompatibility. The data found in the literature, the experimental corrosion and biocompatibility results presented in this article, and its long track record as an implant material demonstrate that the cobalt superalloy is an appropriate material for permanent surgical implants that require high yield strength and fatigue resistance combined with high elastic modulus, and that it can be safely imaged with magnetic resonance.

  4. Defect Investigation of Plastically Deformed Al 5454 Wrought Alloy using PADBS and Electrical Measurements

    International Nuclear Information System (INIS)

    Abdel-Rahman, M.; Kamel, N.A.; Lotfy, Y.A.; Badawi, E.A.; Abdel-Rahman, M.A.

    2009-01-01

    Positron Annihilation Doppler Broadening Spectroscopy (PADPS) is a nondestructive technique used in material science. Electrical measurements are one of the oldest techniques used also in material science. This paper aimed to discuss the availability of using both PADPS and electrical measurements as diagnostic techniques to detect the defects in a set of plastically deformed 5454 wrought aluminum alloy. The results of the positron annihilation measurements and the electrical measurements were analyzed in terms of the two-state trapping model. This model can be used to investigate both defect and dislocation densities of the samples under investigation. Results obtained by both nuclear and electrical techniques have been reportedity

  5. Ni-base wrought alloy development for USC steam turbine rotor applications

    International Nuclear Information System (INIS)

    Penkalla, H.-J.; Schubert, F.

    2004-01-01

    For the development of a new generation of steam turbines for use in advanced power plants with prospective operating temperatures of about 700 o C the ferritic steels for rotor applications must be replaced by advanced wrought Ni-base superalloys as the most qualified candidate materials for this purpose. In this paper three different potential candidates are discussed under the aspects of fabricability, sufficient microstructural and mechanical stability. As a result of theoretical and experimental investigation suitable strategies for the development two modified alloys are proposed to improve the fabricability and microstructural stability. (author)

  6. Infrared Extinction Performance of Randomly Oriented Microbial-Clustered Agglomerate Materials.

    Science.gov (United States)

    Li, Le; Hu, Yihua; Gu, Youlin; Zhao, Xinying; Xu, Shilong; Yu, Lei; Zheng, Zhi Ming; Wang, Peng

    2017-11-01

    In this study, the spatial structure of randomly distributed clusters of fungi An0429 spores was simulated using a cluster aggregation (CCA) model, and the single scattering parameters of fungi An0429 spores were calculated using the discrete dipole approximation (DDA) method. The transmittance of 10.6 µm infrared (IR) light in the aggregated fungi An0429 spores swarm is simulated by using the Monte Carlo method. Several parameters that affect the transmittance of 10.6 µm IR light, such as the number and radius of original fungi An0429 spores, porosity of aggregated fungi An0429 spores, and density of aggregated fungi An0429 spores of the formation aerosol area were discussed. Finally, the transmittances of microbial materials with different qualities were measured in the dynamic test platform. The simulation results showed that the parameters analyzed were closely connected with the extinction performance of fungi An0429 spores. By controlling the value of the influencing factors, the transmittance could be lower than a certain threshold to meet the requirement of attenuation in application. In addition, the experimental results showed that the Monte Carlo method could well reflect the attenuation law of IR light in fungi An0429 spore agglomerates swarms.

  7. Static magnetism and thermal switching in randomly oriented L10 FePt thin films

    Science.gov (United States)

    Lisfi, A.; Pokharel, S.; Alqarni, A.; Akioya, O.; Morgan, W.; Wuttig, M.

    2018-05-01

    Static magnetism and thermally activated magnetic relaxation were investigated in granular FePt films (20 nm-200 nm thick) with random magnetic anisotropy through hysteresis loop, torque curve and magnetization time dependence measurements. While the magnetism of thicker film (200 nm thick) is dominated by a single switching of the ordered L10 phase, thinner film (20 nm) displays a double switching, which is indicative of the presence of the disordered cubic phase. The pronounced behavior of double switching in thinner film suggests that the film grain boundary is composed of soft cubic magnetic phase. The magnetic relaxation study reveals that magnetic viscosity S of the films is strongly dependent on the external applied field and exhibits a maximum value (12 kAm) around the switching field and a vanishing behavior at low (1 kOe) and large (12 kOe) fields. The activation volume of the thermal switching was found to be much smaller than the physical volume of the granular structure due to the incoherent rotation mode of the magnetization reversal mechanism, which is established to be domain wall nucleation.

  8. Resource-oriented coaching for reduction of examination-related stress in medical students: an exploratory randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Kötter T

    2016-08-01

    Full Text Available Thomas Kötter,1 Frank Niebuhr2 1Institute of Social Medicine and Epidemiology, 2Institute of Family Medicine, University of Lübeck, Lübeck, Germany Introduction: The years spent in acquiring medical education is considered a stressful period in the life of many students. Students whose mental health deteriorates during this long period of study are less likely to become empathic and productive physicians. In addition to other specific stressors, academic examinations seem to further induce medical school-related stress and anxiety. Combined group and individual resource-oriented coaching early in medical education might reduce examination-related stress and anxiety and, consequently, enhance academic performance. Good quality evidence, however, remains scarce. In this study, therefore, we explored the question of whether coaching affects examination-related stress and health in medical students.Methods: We conducted a randomized controlled trial. Students who registered for the first medical academic examination in August 2014 at the University of Lübeck were recruited and randomized into three groups. The intervention groups 1 and 2 received a 1-hour psychoeducative seminar. Group 1 additionally received two 1-hour sessions of individual coaching during examination preparation. Group 3 served as a control group. We compared changes in self-rated general health (measured by a single item, anxiety and depression (measured by the hospital anxiety and depression scale, as well as medical school stress (measured by the perceived medical school stress instrument. In order to further investigate the influence of group allocation on perceived medical school stress, we conducted a linear regression analysis.Results: We saw a significant deterioration of general health and an increase in anxiety and depression scores in medical students while preparing for an examination. We found a small, but statistically significant, effect of group allocation on

  9. Nanoscale charge localization induced by random orientations of organic molecules in hybrid perovskite CH3NH3PbI3

    Science.gov (United States)

    Ma, Jie; Wang, Lin-Wang

    2015-03-01

    Perovskite-based solar cells have achieved high solar-energy conversion efficiencies and attracted wide attentions nowadays. Despite the rapid progress in solar-cell devices, many fundamental issues of the hybrid perovskites have not been fully understood. Experimentally, it is well known that in CH3NH3PbI3, the organic molecules CH3NH3 are randomly orientated at the room temperature, but the impact of the random molecular orientation has not been investigated. Using linear-scaling ab-initiomethods, we have calculated the electronic structures of the tetragonal phase of CH3NH3PbI3 with randomly orientated organic molecules in large supercells up to ~20,000 atoms. Due to the dipole moment of the organic molecule, the random orientation creates a novel system with long-range potential fluctuations unlike alloys or other conventional disordered systems. We find that the charge densities of the conduction-band minimum and the valence-band maximum are localized separately in nanoscales due to the potential fluctuations. The charge localization causes electron-hole separation and reduces carrier recombination rates, which may contribute to the long carrier lifetime observed in experiments. We have also proposed a model to explain the charge localization.

  10. The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial

    NARCIS (Netherlands)

    Finnema, E.J.; Dr�es, R.M.; Ettema, T.P.; Ooms, M.E.; Adèr, H.J.; Ribbe, M.W.; van Tilburg, W.

    2005-01-01

    Objectives: To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. Design: A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. Setting: Sixteen psychogeriatric wards in

  11. The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial

    NARCIS (Netherlands)

    Finnema, E.J.; Dr�es, R.M.; Ettema, T.P.; Ooms, M.E.; Adèr, H.J.; Ribbe, M.W.; Tilburg, van W.

    2005-01-01

    OBJECTIVES: To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. DESIGN: A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. SETTING: Sixteen psychogeriatric wards in

  12. Quick synthesis of highly aligned or randomly oriented nanofibrous structures composed of C60 molecules via self-assembly

    International Nuclear Information System (INIS)

    Kurosu, Shunji; Fukuda, Takahiro; Maekawa, Toru

    2013-01-01

    Assemblies, which are composed of nanoparticles such as nanofibres, have been intensively studied in recent years. This has particularly been the case in the field of biomedicine, where the aim is to develop efficient methodologies for capturing and separating target biomolecules and cells and/or encouraging bio-chemical reactions, utilizing the extremely high surface area to volume ratio of assemblies. There is an urgent need for the development of a quick synthesis method of forming nanofibrous structures on the surface of biomedical microchips and devices for the investigation of the interactions between biomolecules/cells and the nanostructures. Here, we produce nanofibrous structures composed of C 60 molecules, which are aligned in one direction or randomly oriented, by dissolving C 60 molecules and sulphur in benzene and evaporating a droplet of the solution on a glass substrate under appropriate conditions. The synthesis time is as short as 30 s. Sulphur is extracted and nanofibres are crystallized by leaving them in supercritical carbon dioxide. (paper)

  13. Standard practice for X-Ray determination of retained austenite in steel with near random crystallographic orientation

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This practice covers the determination of retained austenite phase in steel using integrated intensities (area under peak above background) of X-ray diffraction peaks using chromium Kα or molybdenum Kα X-radiation. 1.2 The method applies to carbon and alloy steels with near random crystallographic orientations of both ferrite and austenite phases. 1.3 This practice is valid for retained austenite contents from 1 % by volume and above. 1.4 If possible, X-ray diffraction peak interference from other crystalline phases such as carbides should be eliminated from the ferrite and austenite peak intensities. 1.5 Substantial alloy contents in steel cause some change in peak intensities which have not been considered in this method. Application of this method to steels with total alloy contents exceeding 15 weight % should be done with care. If necessary, the users can calculate the theoretical correction factors to account for changes in volume of the unit cells for austenite and ferrite resulting from vari...

  14. Nuclear magnetic relaxation induced by exchange-mediated orientational randomization: longitudinal relaxation dispersion for spin I = 1.

    Science.gov (United States)

    Nilsson, Tomas; Halle, Bertil

    2012-08-07

    The frequency dependence of the longitudinal relaxation rate, known as the magnetic relaxation dispersion (MRD), can provide a frequency-resolved characterization of molecular motions in complex biological and colloidal systems on time scales ranging from 1 ns to 100 μs. The conformational dynamics of immobilized proteins and other biopolymers can thus be probed in vitro or in vivo by exploiting internal water molecules or labile hydrogens that exchange with a dominant bulk water pool. Numerous water (1)H and (2)H MRD studies of such systems have been reported, but the widely different theoretical models currently used to analyze the MRD data have resulted in divergent views of the underlying molecular motions. We have argued that the essential mechanism responsible for the main dispersion is the exchange-mediated orientational randomization (EMOR) of anisotropic nuclear (electric quadrupole or magnetic dipole) couplings when internal water molecules or labile hydrogens escape from orientationally confining macromolecular sites. In the EMOR model, the exchange process is thus not just a means of mixing spin populations but it is also the direct cause of spin relaxation. Although the EMOR theory has been used in several studies to analyze water (2)H MRD data from immobilized biopolymers, the fully developed theory has not been described. Here, we present a comprehensive account of a generalized version of the EMOR theory for spin I = 1 nuclides like (2)H. As compared to a previously described version of the EMOR theory, the present version incorporates three generalizations that are all essential in applications to experimental data: (i) a biaxial (residual) electric field gradient tensor, (ii) direct and indirect effects of internal motions, and (iii) multiple sites with different exchange rates. In addition, we describe and assess different approximations to the exact EMOR theory that are useful in various regimes. In particular, we consider the experimentally

  15. High-strength wrought magnesium alloy with dense nano-scale spherical precipitate

    Institute of Scientific and Technical Information of China (English)

    YU WenBin; CHEN ZhiQian; CHENG NanPu; GAN BingTai; HE Hong; LI XueLian; HU JinZhu

    2007-01-01

    This paper reported the influences of Yb addition on the precipitate and mechanical properties of wrought magnesium alloy ZK60. The ingots of ZK60-1.78Yb (wt%,0.26 at%) alloys were cast using permanent mould and extruded at 370℃. By means of TEM and HRTEM,it was observed that Yb affected the precipitate and precipitation of ZK60-1.78Yb alloys significantly. Dynamic precipitation occurred in the as-extruded alloy and spherical nano-scale precipitate with high density and homogeneity exhibited in the aged alloys. The precipitate particles were about 5-20 nm in diameter,10-30 nm in average space length. The tensile test results showed that the ZK60-1.78Yb alloy had excellent precipitation strengthening response with the maximum tensile strength 417.5 MPa at ambient temperature.

  16. A life evaluation under creep-fatigue-environment interaction of Ni-base wrought alloys

    International Nuclear Information System (INIS)

    Hattori, Hiroshi; Kitagawa, Masaki; Ohtomo, Akira; Itoh, Mitsuyoshi

    1986-01-01

    In order to determine a failure criteria under cyclic loading and affective environment for HTGR systems, a series of strain controlled low-cycle fatigue tests were carried out at HTGR maximum gas temperatures in air, in vacuum and in HTGR helium environments on two nickel-base wrought alloys, namely Inconel 617 and Hastelloy XR. This paper first describes the creep-fatigue-environment properties of these alloys followed by a proposal of an evaluation method of creep-fatigue-environment interaction based on the experimental data to define the more reasonable design criteria, which is a modification of the linear damage summation rule. Second, the creep-fatigue properties of Hastelloy XR at 900 deg C and the result evaluated by this proposed method are shown. This criterion is successfully applied to the life prediction at 900 deg C. In addition, the creep-fatigue properties of Hastelloy XR-II are discussed. (author)

  17. Effects of cobalt on structure, microchemistry and properties of a wrought nickel-base superalloy

    Science.gov (United States)

    Jarrett, R. N.; Tien, J. K.

    1982-01-01

    The effect of cobalt on the basic mechanical properties and microstructure of wrought nickel-base superalloys has been investigated experimentally by systematically replacing cobalt by nickel in Udimet 700 (17 wt% Co) commonly used in gas turbine (jet engine) applications. It is shown that the room temperature tensile yield strength and tensile strength only slightly decrease in fine-grained (disk) alloys and are basically unaffected in coarse-grained (blading) alloys as cobalt is removed. Creep and stress rupture resistances at 760 C are found to be unaffected by cobalt level in the blading alloys and decrease sharply only when the cobalt level is reduced below 8 vol% in the disk alloys. The effect of cobalt is explained in terms of gamma prime strengthening kinetics.

  18. Environmental fatigue behaviors of wrought and cast stainless steels in 310degC deoxygenated water

    International Nuclear Information System (INIS)

    Cho, Pyung-Yeon; Jang, Hun; Jang, Changheui; Jeong, Ill-Seok; Lee, Jae-Gon

    2009-01-01

    Environmental fatigue behaviors of wrought type 316LN stainless steel and cast CF8M stainless steel were investigated. Low cycle fatigue tests were performed in a 310degC deoxygenated water environment at a strain rate of 0.04%/s with various strain amplitudes. It was shown that the low cycle fatigue life of CF8M was slightly longer than that of 316LN. To understand the causes of the difference, fracture surface was observed and material factors like microstructure, mechanical properties, and chemical compositions of both materials were analyzed. In a duplex microstructure of CF8M, the fatigue crack growth was affected by barrier role of ferrite phase and acceleration role of microvoids in ferrite phase. Test results indicate that the former is greater than the latter, resulting in slower fatigue crack growth rate, or longer LCF lives in CF8M than in 316LN. (author)

  19. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial

    Science.gov (United States)

    2012-01-01

    Background Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as ‘anger syndrome’. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. Methods/design The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT) group and a control music therapy (CMT) group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2), all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each). Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI), and the secondary outcomes are the Hwa-byung scale (H-scale), the Center for Epidemiologic Studies Depression Scale (CES-D), the Hwa-byung visual analogue scale (H-VAS) for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF), and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2), after the last treatment session (visit 9), and at 4 weeks after the end of all trial sessions (visit 10). From the baseline (visit 2) through the follow-up (visit 10), the entire process will take a total of 53 days. Discussion This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in OMMT, patients

  20. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Park Jeong-Su

    2012-09-01

    Full Text Available Abstract Background Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as ‘anger syndrome’. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. Methods/design The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT group and a control music therapy (CMT group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2, all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each. Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI, and the secondary outcomes are the Hwa-byung scale (H-scale, the Center for Epidemiologic Studies Depression Scale (CES-D, the Hwa-byung visual analogue scale (H-VAS for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF, and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2, after the last treatment session (visit 9, and at 4 weeks after the end of all trial sessions (visit 10. From the baseline (visit 2 through the follow-up (visit 10, the entire process will take a total of 53 days. Discussion This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in

  1. Core stability exercise is as effective as task-oriented motor training in improving motor proficiency in children with developmental coordination disorder: a randomized controlled pilot study.

    Science.gov (United States)

    Au, Mei K; Chan, Wai M; Lee, Lin; Chen, Tracy Mk; Chau, Rosanna Mw; Pang, Marco Yc

    2014-10-01

    To compare the effectiveness of a core stability program with a task-oriented motor training program in improving motor proficiency in children with developmental coordination disorder (DCD). Randomized controlled pilot trial. Outpatient unit in a hospital. Twenty-two children diagnosed with DCD aged 6-9 years were randomly allocated to the core stability program or the task-oriented motor program. Both groups underwent their respective face-to-face training session once per week for eight consecutive weeks. They were also instructed to carry out home exercises on a daily basis during the intervention period. Short Form of the Bruininks-Oseretsky Test of Motor Proficiency (Second Edition) and Sensory Organization Test at pre- and post-intervention. Intention-to-treat analysis revealed no significant between-group difference in the change of motor proficiency standard score (P=0.717), and composite equilibrium score derived from the Sensory Organization Test (P=0.100). Further analysis showed significant improvement in motor proficiency in both the core stability (mean change (SD)=6.3(5.4); p=0.008) and task-oriented training groups (mean change(SD)=5.1(4.0); P=0.007). The composite equilibrium score was significantly increased in the task-oriented training group (mean change (SD)=6.0(5.5); P=0.009), but not in the core stability group (mean change(SD) =0.0(9.6); P=0.812). In the task-oriented training group, compliance with the home program was positively correlated with change in motor proficiency (ρ=0.680, P=0.030) and composite equilibrium score (ρ=0.638, P=0.047). The core stability exercise program is as effective as task-oriented training in improving motor proficiency among children with DCD. © The Author(s) 2014.

  2. Omitted Data in Randomized Controlled Trials for Anxiety and Depression: A Systematic Review of the Inclusion of Sexual Orientation and Gender Identity

    Science.gov (United States)

    Heck, Nicholas C.; Mirabito, Lucas A.; LeMaire, Kelly; Livingston, Nicholas A.; Flentje, Annesa

    2016-01-01

    Objective The current study examined the frequency with which randomized controlled trials (RCTs) of behavioral and psychological interventions for anxiety and depression include data pertaining to participant sexual orientation and non-binary gender identities. Method Using systematic review methodology, the databases PubMed and PsycINFO were searched to identify RCTs published in 2004, 2009, and 2014. Random selections of 400 articles per database per year (2400 articles in total) were considered for inclusion in the review. Articles meeting inclusion criteria were read and coded by the research team to identify whether the trial reported data pertaining to participant sexual orientation and non-binary gender identities. Additional trial characteristics were also identified and indexed in our database (e.g., sample size, funding source etc.). Results Of the 232 articles meeting inclusion criteria, only one reported participants’ sexual orientation and zero articles included non-binary gender identities. A total of 52,769 participants were represented in the trials, 93 of which were conducted in the U.S. and 43 acknowledged the National Institutes of Health as a source of funding. Conclusions Despite known mental health disparities on the basis of sexual orientation and non-binary gender identification, researchers evaluating interventions for anxiety and depression are not reporting on these important demographic characteristics. Reporting practices must change in order to ensure that our interventions generalize to lesbian, gay, bisexual, and transgender persons. PMID:27845517

  3. Biocompatibility of metal injection molded versus wrought ASTM F562 (MP35N) and ASTM F1537 (CCM) cobalt alloys.

    Science.gov (United States)

    Chen, Hao; Sago, Alan; West, Shari; Farina, Jeff; Eckert, John; Broadley, Mark

    2011-01-01

    We present a comparative analysis between biocompatibility test results of wrought and Metal Injection Molded (MIM) ASTM F562-02 UNS R30035 (MP35N) and F1537 UNS R31538 (CCM) alloy samples that have undergone the same generic orthopedic implant's mechanical, chemical surface pre-treatment, and a designed pre-testing sample preparation method. Because the biocompatibility properties resulting from this new MIM cobalt alloy process are not well understood, we conducted tests to evaluate cytotoxicity (in vitro), hemolysis (in vitro), toxicity effects (in vivo), tissue irritation level (in vivo), and pyrogenicity count (in vitro) on such samples. We show that our developed MIM MP35N and CCM materials and treatment processes are biocompatible, and that both the MIM and wrought samples, although somewhat different in microstructure and surface, do not show significant differences in biocompatibility.

  4. Effects of carbon nanotubes on the microstructure and mechanical properties of the wrought Mg–2.0Zn alloy

    International Nuclear Information System (INIS)

    Zeng, Xiao-shu; Liu, Yong; Huang, Qiu-yu; Zeng, Gang; Zhou, Guo-hua

    2013-01-01

    The effects of carbon nanotubes (CNTs) on the microstructure and mechanical properties of wrought Mg alloys with of 2.0 wt% of Zn content (Mg–2.0Zn) are investigated by the optical microscope (OM), transmission electron microscope (TEM), scanning electron microscope (SEM) and uniaxial tensile test. Different contents of CNTs are added separately in the as-cast ingots and as-extruded samples. The results showed that CNTs could greatly refine the microstructure of both as-cast alloy and as-extruded alloy. The tensile strength, yield strength, elongation and elasticity modulus of the alloy with CNTs were improved to different extents. Remarkably, the increase of elongation reached approximately 80%. The fracture surface of the alloy with CNTs mainly consisted of dimples with toughness rupture modes. Therefore, it suggests that CNTs could enhance the plasticity of wrought Mg–2.0Zn alloy without the reduction of strength

  5. Microstructure of Friction Stir Welded AlSi9Mg Cast with 5083 and 2017A Wrought Aluminum Alloys

    Science.gov (United States)

    Hamilton, C.; Kopyściański, M.; Dymek, S.; Węglowska, A.; Pietras, A.

    2018-03-01

    Wrought aluminum alloys 5083 and 2017A were each joined with cast aluminum alloy AlSi9Mg through friction stir welding in butt weld configurations. For each material system, the wrought and cast alloy positions, i.e., the advancing side or the retreating side, were exchanged between welding trials. The produced weldments were free from cracks and discontinuities. For each alloy configuration, a well-defined nugget comprised of alternating bands of the welded alloys characterized the microstructure. The degree of mixing, however, strongly depended on which wrought alloy was present and on its position during processing. In all cases, the cast AlSi9Mg alloy dominated the weld center regardless of its position during welding. Electron backscattered diffraction analysis showed that the grain size in both alloys (bands) constituting the nugget was similar and that the majority of grain boundaries exhibited a high angle character (20°-60°). Regardless of the alloy, however, all grains were elongated along the direction of the material plastic flow during welding. A numerical simulation of the joining process visualized the material flow patterns and temperature distribution and helped to rationalize the microstructural observations. The hardness profiles across the weld reflected the microstructure formed during welding and correlated well with the temperature changes predicted by the numerical model. Tensile specimens consistently fractured in the cast alloy near the weld nugget.

  6. Room Temperature Shear Band Development in Highly Twinned Wrought Magnesium AZ31B Sheet

    Science.gov (United States)

    Scott, Jon; Miles, Michael; Fullwood, David; Adams, Brent; Khosravani, Ali; Mishra, Raja K.

    2013-01-01

    Failure mechanisms were studied in wrought AZ31B magnesium alloy after forming under different strain paths. Optical micrographs were used to observe the shear band formation and regions of high twin density in samples strained under uniaxial, biaxial, and plane strain conditions. Interrupted testing at 4 pct effective strain increments, until failure, was used to observe the evolution of the microstructure. The results showed that shear bands, with a high percentage of twinned grains, appeared early in the samples strained under biaxial or plane strain tension. These bands are similar to those seen in uniaxial tension specimens just prior to failure where the uniaxial tensile ductility was much greater than that observed for plane strain or biaxial tension conditions. A forming limit diagram for AZ31B, which was developed from the strain data, showed that plane strain and biaxial tension had very similar limit strains; this contrasts with materials like steel or aluminum alloys, which typically have greater ductility in biaxial tension compared to plane strain tension.

  7. Castability of Traditionally Wrought Ni-Based Superalloys for USC Steam Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Jablonski, P D; Cowen, C J; Hawk, J A; Evens, N; Maziasz, P

    2011-02-27

    The high temperature components within conventional coal fired power plants are manufactured from ferritic/martensitic steels. In order to reduce greenhouse gas emissions the efficiency of pulverized coal steam power plants must be increased. The proposed steam temperature in the Advanced Ultra Supercritical (A-USC) power plant is high enough (760°C) that ferritic/martensitic steels will not work due to temperature limitations of this class of materials; thus Ni-based superalloys are being considered. The full size castings are quite substantial: ~4in thick, several feet in diameter and weigh 5-10,000lb each half. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled in order to produce relevant microstructures. A multi-step homogenization heat treatment was developed in order to better deploy the alloy constituents. The castability of two traditionally wrought Ni-based superalloys to which minor alloy adjustments have been made in order to improve foundry performance is further explored.

  8. Fracture toughness of irradiated wrought and cast austenitic stainless steels in BWR environment

    International Nuclear Information System (INIS)

    Chopra, O.K.; Gruber, E.E.; Shack, W.J.

    2007-01-01

    Experimental data are presented on the fracture toughness of wrought and cast austenitic stainless steels (SSs) that were irradiated to a fluence of ∼ 1.5 x 10 21 n/cm 2 (E > 1 MeV) * (∼ 2.3 dpa) at 296-305 o C. To evaluate the possible effects of test environment and crack morphology on the fracture toughness of these steels, all tests were conducted in normal-water-chemistry boiling water reactor (BWR) environments at ∼ 289 o C. Companion tests were also conducted in air on the same material for comparison. The fracture toughness J-R curves for SS weld heat-affected-zone materials in BWR water were found to be comparable to those in air. However, the results of tests on sensitized Type 304 SS and thermally aged cast CF-8M steel suggested a possible effect of water environment. The available fracture toughness data on irradiated austenitic SSs were reviewed to assess the potential for radiation embrittlement of reactor-core internal components. The synergistic effects of thermal and radiation embrittlement of cast austenitic SS internal components are also discussed. (author)

  9. Evaluation of creep-fatigue/ environment interaction in Ni-base wrought alloys for HTGR application

    International Nuclear Information System (INIS)

    Hattori, Hiroshi; Kitagawa, Masaki; Ohtomo, Akira

    1986-01-01

    High Temperature Gas-cooled Reactor (HTGR) systems should be designed based on the high temperature structural strength design procedures. On the development of design code, the determination of failure criteria under cyclic loading and severe environments is one of the most important items. By using the previous experimental data for Ni-base wrought alloys, Inconel 617 and Hastelloy XR, several evaluation methods for creep-fatigue interaction were examined for their capability to predict their cyclic loading behavior for HTGR application. At first, the strainrange partitioning method, the frequency modified damage function and the linear damage summation rule were discussed. However, these methods were not satisfactory with the above experimental results. Thus, in this paper, a new fracture criterion, which is a modification of the linear damage summation rule, is proposed based on the experimental data. In this criterion, fracture is considered to occur when the sum of the fatigue damage, which is the function of the applied cyclic strain magnitude, and the modified creep damage, which is the function of the applied cyclic stress magnitude (determined as time devided by cyclic creep rupture time reflecting difference of creep damages by tensile creep and compressive creep), reaches a constant value. This criterion was successfully applied to the life prediction of materials at HTGR temperatures. (author)

  10. Environmentally assisted fracture of cast and wrought mild steels in brine

    International Nuclear Information System (INIS)

    Pitman, S.G.; Hall, E.E.

    1984-01-01

    Two test methods, slow strain rate (SSR) tests and corrosion fatigue tests, are being used to investigate the susceptibility of wrought and cast mild steels to environmentally assisted fracture. The SSR test provides an assessment of relative cracking susceptibility, and is most useful for comparing the effects of different environments on a given material, and for measuring the relative susceptibility of different materials to environmentally assisted cracking in a given environment. The corrosion fatigue test measures the stress intensity (which is proportional to stress times the square root of crack length) below which an existing flaw or crack will not grow. The test may also prove useful in measuring the stress intensity that provides an acceptable rate of crack growth. The SSR test has been used to investigate the effects of strain rate, temperature, and solution oxygen content on fracture properties of mild steel. The results of currently available corrosion fatigue tests are limited to crack growth rate measurements at one frequency in air and in brine. These measurements will be part of an overall program to evaluate allowable stress intensities, but this evaluation cannot be made until measurements are taken at different frequencies and at lower stress intensities. This report, then discusses the background of SSR testing, experimental procedures, results, and conclusions

  11. Ductile long range ordered alloys with high critical ordering temperature and wrought articles fabricated therefrom

    Science.gov (United States)

    Liu, Chain T.; Inouye, Henry

    1979-01-01

    Malleable long range ordered alloys having high critical ordering temperatures exist in the V(Fe, Co).sub.3 and V(Fe, Co, Ni).sub.3 systems. These alloys have the following compositions comprising by weight: 22-23% V, 14-30% Fe, and the remainder Co or Co and Ni with an electron density no more than 7.85. The maximum combination of high temperature strength, ductility and creep resistance are manifested in the alloy comprising by weight 22-23% V, 14-20% Fe and the remainder Co and having an atomic composition of V(Fe .sub.0.20-0.26 C Co.sub.0.74-0.80).sub.3. The alloy comprising by weight 22-23% V, 16-17% Fe and 60-62% Co has excellent high temperature properties. The alloys are fabricable into wrought articles by casting, deforming, and annealing for sufficient time to provide ordered structure.

  12. Long-Term Cyclic Oxidation Behavior of Wrought Commercial Alloys at High Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Li, Bingtao [Iowa State Univ., Ames, IA (United States)

    2003-01-01

    The oxidation resistance of a high-temperature alloy is dependent upon sustaining the formation of a protective scale, which is strongly related to the alloying composition and the oxidation condition. The protective oxide scale only provides a finite period of oxidation resistance owing to its eventual breakdown, which is especially accelerated under thermal cycling conditions. This current study focuses on the long-term cyclic oxidation behavior of a number of commercial wrought alloys. The alloys studied were Fe- and Ni-based, containing different levels of minor elements, such as Si, Al, Mn, and Ti. Oxidation testing was conducted at 1000 and 1100 C in still air under both isothermal and thermal cycling conditions (1-day and 7-days). The specific aspects studied were the oxidation behavior of chromia-forming alloys that are used extensively in industry. The current study analyzed the effects of alloying elements, especially the effect of minor element Si, on cyclic oxidation resistance. The behavior of oxide scale growth, scale spallation, subsurface changes, and chromium interdiffusion in the alloy were analyzed in detail. A novel model was developed in the current study to predict the life-time during cyclic oxidation by simulating oxidation kinetics and chromium interdiffusion in the subsurface of chromia-forming alloys.

  13. Effect of Thermal Aging on the Corrosion Behavior of Wrought and Welded Alloy 22

    International Nuclear Information System (INIS)

    Rebak, R.B.; Edgecumbe Summers, T.S.; Lian, T.

    2002-01-01

    Alloy 22 (UNS N06022) is a candidate material for the external wall of the high level nuclear waste containers for the potential repository site at Yucca Mountain. In the mill-annealed (MA) condition, Alloy 22 is a single face centered cubic phase. When exposed to temperatures on the order of 600 C and above for times higher than 1 h, this alloy may develop secondary phases that are brittle and offer a lower corrosion resistance than the MA condition. The objective of this work was to age Alloy 22 at temperatures between 482 C and 800 C for times between 0.25 h and 3,000 h and to study the corrosion performance of the resulting material. Aging was carried out using wrought specimens as well as gas tungsten arc welded (GTAW) specimens. The corrosion performance was characterized using standard immersion tests in aggressive acidic solutions and electrochemical tests in multi-component solutions. Results show that, in general, in aggressive acidic solutions the corrosion rate increased as the aging temperature and aging time increased. However, in multi ionic environments that could be relevant to the potential Yucca Mountain site, the corrosion rate of aged material was the same as the corrosion rate of the MA material

  14. Effects of mirror therapy integrated with task-oriented exercise on the balance function of patients with poststroke hemiparesis: a randomized-controlled pilot trial.

    Science.gov (United States)

    Cha, Hyun-Gyu; Oh, Duck-Won

    2016-03-01

    This study aimed to explore the effects of mirror therapy integrated with task-oriented exercise on balance function in poststroke hemiparesis. Twenty patients with poststroke hemiparesis were assigned randomly to an experimental group (EG) and a control group (CG), with 10 individuals each. Participants of the EG and CG received a task-oriented exercise program with a focus on the strengthening of the lower limb and the practice of balance-related functional tasks. An additional option for the EG was front and side wall mirrors to provide visual feedback for their own movements while performing the exercise. The program was performed for 30 min, twice a day, five times per week for 4 weeks. Outcome measures included the Berg balance scale, the timed up-and-go test, and quantitative data (balance index and dynamic limits of stability). In the EG and CG, all variables showed significant differences between pretest and post-test (Phemiparesis.

  15. Task-oriented training with computer gaming in people with rheumatoid arthritisor osteoarthritis of the hand: study protocol of a randomized controlled pilot trial.

    Science.gov (United States)

    Srikesavan, Cynthia Swarnalatha; Shay, Barbara; Robinson, David B; Szturm, Tony

    2013-03-09

    Significant restriction in the ability to participate in home, work and community life results from pain, fatigue, joint damage, stiffness and reduced joint range of motion and muscle strength in people with rheumatoid arthritis or osteoarthritis of the hand. With modest evidence on the therapeutic effectiveness of conventional hand exercises, a task-oriented training program via real life object manipulations has been developed for people with arthritis. An innovative, computer-based gaming platform that allows a broad range of common objects to be seamlessly transformed into therapeutic input devices through instrumentation with a motion-sense mouse has also been designed. Personalized objects are selected to target specific training goals such as graded finger mobility, strength, endurance or fine/gross dexterous functions. The movements and object manipulation tasks that replicate common situations in everyday living will then be used to control and play any computer game, making practice challenging and engaging. The ongoing study is a 6-week, single-center, parallel-group, equally allocated and assessor-blinded pilot randomized controlled trial. Thirty people with rheumatoid arthritis or osteoarthritis affecting the hand will be randomized to receive either conventional hand exercises or the task-oriented training. The purpose is to determine a preliminary estimation of therapeutic effectiveness and feasibility of the task-oriented training program. Performance based and self-reported hand function, and exercise compliance are the study outcomes. Changes in outcomes (pre to post intervention) within each group will be assessed by paired Student t test or Wilcoxon signed-rank test and between groups (control versus experimental) post intervention using unpaired Student t test or Mann-Whitney U test. The study findings will inform decisions on the feasibility, safety and completion rate and will also provide preliminary data on the treatment effects of the task-oriented

  16. Economic evaluation of schema therapy and clarification-oriented psychotherapy for personality disorders: A multicenter, randomized controlled trial

    NARCIS (Netherlands)

    Bamelis, L.L.M.; Arntz, A.; Wetzelaer, P.; Verdoorn, R.; Evers, S.M.A.A.

    2015-01-01

    Purpose: To compare from a societal perspective the cost-effectiveness and cost-utility of schema therapy, clarification-oriented psychotherapy, and treatment as usual for patients with avoidant, dependent, obsessive-compulsive, paranoid, histrionic, and/or narcissistic personality disorder. Method:

  17. Irradiation damage behavior of low alloy steel wrought and weld materials

    International Nuclear Information System (INIS)

    Stofanak, R.J.; Poskie, T.J.; Li, Y.Y.; Wire, G.L.

    1993-01-01

    A study was undertaken to evaluate the irradiation damage response of several different types of low alloy steel: vintage type ASTM A302 Grade B (A302B) plates and welds containing different Ni and Cu concentrations, 3.5% Ni steels similar to ASTM A508 Class 4, welds containing about 1% Ni (similar to type 105S), and 3.5% Ni steels with ''superclean'' composition. All materials were irradiated at several different irradiation damage levels ranging from 0.0003 to 0.06 dpa at 232C (450F). Complete Charpy V-notch impact energy transition temperature curves were generated for all materials before and after irradiation to determine transition temperature at 4IJ (30 ft-lb) or 47J (35 ft-lb) and the upper shelf energy. Irradiation damage behavior was measured by shift in Charpy 41J or 47J transition temperature (ΔTT4 41J or ΔTT 47J ) and lowering of upper shelf Charpy energy at a given irradiation damage level. It was found that chemical composition greatly influenced irradiation damage behavior; highest irradiation damage (greatest ΔTT) was found in an A302B type weld containing 1.28% Ni and 0.20% Cu while the least damage was found in 3.5% Ni, 0.05% Cu, superclean wrought materials. Combination of Ni and Cu was found to affect irradiation damage behavior at higher irradiation damage levels in the A302B welds where the 1.28% Ni, 0.20% Cu weld showed more damage than a 0.60% Ni, 0.31% Cu weld. For the 3.5% Ni steels, fabrication influenced irradiation behavior in that a silicon (Si) killed material showed greater irradiation damage than a low silicon material. In general, the 3.5% Ni materials with low copper showed less irradiation damage than the A302B materials

  18. The role of Si and Ca on new wrought Mg-Zn-Mn based alloy

    International Nuclear Information System (INIS)

    Ben-Hamu, G.; Eliezer, D.; Shin, K.S.

    2007-01-01

    The development of new wrought magnesium alloys for automotive industry has increased in recent years due to their high potential as structural materials for low density and high strength/weight ratio demands. However, the poor mechanical properties of the magnesium alloys have led to search a new kind of magnesium alloys for better strength and ductility. Magnesium alloys show strong susceptibility to localized corrosion in chlorides solutions due to their inhomogeneous microstructure. The existence of intermetallics in the microstructure of magnesium alloys might represent initiation sites for localized corrosion. This is due to the formation of galvanic couples between the intermetallics and the surrounding matrix. The main objective of this research is to investigate the corrosion behavior of new magnesium alloys; Mg-Zn-Mn-Si-Ca (ZSMX) alloys. The ZSM6X1 + YCa alloys were prepared by using hot extrusion method. AC and DC polarization tests were carried out on the extruded rods, which contain different amounts of silicon or calcium. The potential difference in air between different phases and the matrix was examined using scanning Kelvin probe force microscopy (SKPFM). The phases present in the alloys have been identified by optical microscopy and scanning electron microscopy/energy dispersive X-ray spectroscopy. Four different phases were found, i.e. intermetallics containing Si-Mn, Mg-Si, Mg-Zn and Mg-Si-Ca phase. All phases exhibited higher potential differences relative to magnesium matrix indicating a cathodic behavior. The potential difference revealed significant dependence on the chemical composition of the phases. Based on the results obtained from the scanning Kelvin probe force microscopy, the cathodic phases are effective sites for the initiation of localized corrosion in Mg-Zn-Mn-Si-Ca alloys

  19. Scattering from randomly oriented scatterers of arbitrary shape in the low-frequency limit with application to vegetation

    Science.gov (United States)

    Karam, M. A.; Fung, A. K.

    1984-01-01

    A general theory of intensity scattering from small particles of arbitrary shape was developed based on the radiative transfer theory. Upon permitting the particles to orient in accordance with any prescribed distribution, scattering models can be derived. By making an appropriate choice of the particle size, the scattering model may be used to estimate scattering from media such as snow, vegetation and sea ice. For the purpose of illustration only comparisons with measurements from a vegetated medium are shown. The difference in scattering between elliptic and circular shaped leaves is demonstrated. In the low frequency limit, the major factors on backscattering from vegetation are found to be the depth of the vegetation layer and the orientation distribution of the leaves. The shape of the leaf is of secondary importance.

  20. Effects of carbon and hafnium concentrations in wrought powder-metallurgy superalloys based on nasa 2b-11 alloy

    International Nuclear Information System (INIS)

    Miner, R.V. Jr.

    1976-01-01

    A candidate alloy for advanced-temperature turbine engine disks and four modifications of that alloy with various C and Hf concentrations were produced as cross-rolled disks from prealloyed powder that was hot isostatically compacted. The mechanical properties, microstructures, and phase relations of the alloys are discussed in terms of their C and Hf concentrations. A low-C and high-Hf modification of IIB-11 had the best balance of mechanical properties for service below about 750 C. Because of their finer grain sizes, none of the powder-metallurgy alloys produced had the high-temperature rupture strength of conventionally cast and wrought IIB-11. (Author)

  1. Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition

    Directory of Open Access Journals (Sweden)

    Olgierd Janusz Goroch

    2017-12-01

    Full Text Available The results of studies concerning friction welding of Weight Heavy Alloy (WHA with AlMg3 alloy are presented. The friction welding of density 17,5 Mg/m3 with aluminum alloy showed that it is possible to reach the joints with the strength exceeding the yield strength of wrought AlMg3 alloy. This strength looks to be promising from point of view of condition which have to be fulfilled in case of armor subcaliber ammunition, where WHA rods play the role Kinetic Energy Penetrators and aluminum is used for projectile ballistic cup.

  2. Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition

    OpenAIRE

    Olgierd Janusz Goroch; Zbigniew Gulbinowicz

    2017-01-01

    The results of studies concerning friction welding of Weight Heavy Alloy (WHA) with AlMg3 alloy are presented. The friction welding of density 17,5 Mg/m3 with aluminum alloy showed that it is possible to reach the joints with the strength exceeding the yield strength of wrought AlMg3 alloy. This strength looks to be promising from point of view of condition which have to be fulfilled in case of armor subcaliber ammunition, where WHA rods play the role Kinetic Energy Penetrators and aluminum i...

  3. Semi-solid process of 2024 wrought aluminum alloy by strain induced melt activation

    Directory of Open Access Journals (Sweden)

    Surachai Numsarapatnuk

    2013-10-01

    Full Text Available The aim of this study is to develop a production process of a fine globular structure feedstock of the 2024 aluminumalloy suitable for subsequent semi-solid forming. The 2024 wrought aluminum alloy was first annealed to reduce the effect ofwork hardening. Then, strain was induced in the alloy by cold compression. After that the microstructural evolution duringpartial melting was investigated. The samples were subjected to full annealing at 415°C for 3 hrs prior to cold compression of40% reduction of area (RA with 3 mm/min strain rate. After that samples were partially melted at 620°C with varying holdingtime from 0 to 60 min followed by water quenching. The grain size and the average grain diameter of solid grains weremeasured using the linear intercept method. The globularization was interpreted in terms of shape factor. Liquid fraction andthe distribution of the eutectic liquid was also investigated. It was found that during partial melting, the globular morphologywas formed by the liquid wetting and fragmentation of high angle boundaries of recrystallized grains. The suitable semi-solidmicrostructure was obtained from a condition of full annealing, 40% cold working and partial melting at 620°C for 6 minholding time. The near globular grains obtained in the range of 0-60 min consisted of uniform spheroid grains with an averagegrain diameter ranged from 73 to 121 m, quenched liquid fraction was approximately 13–27% and the shape factor was greaterthan 0.6. At a holding time of less than 6 min, grain coarsening was dominant by the immigration of high-angle grainboundaries. At a longer holding time, liquid fraction increased and Ostwald ripening was dominant. The coarsening rateconstant for the 2024 Al alloy was 400.36 mm3.s-1. At a soaking time of 60 min, it was found that a minimum diameter differencewas 1.06% with coarsening index n=3 in a power law equation. The non-dendritic slug of 2024 alloy was rapid compressedinto a disc with 90%RA

  4. Quantitative time domain analysis of lifetime-based Förster resonant energy transfer measurements with fluorescent proteins: Static random isotropic fluorophore orientation distributions

    DEFF Research Database (Denmark)

    Alexandrov, Yuriy; Nikolic, Dino Solar; Dunsby, Christopher

    2018-01-01

    Förster resonant energy transfer (FRET) measurements are widely used to obtain information about molecular interactions and conformations through the dependence of FRET efficiency on the proximity of donor and acceptor fluorophores. Fluorescence lifetime measurements can provide quantitative...... into new software for fitting donor emission decay profiles. Calculated FRET parameters, including molar population fractions, are compared for the analysis of simulated and experimental FRET data under the assumption of static and dynamic fluorophores and the intermediate regimes between fully dynamic...... analysis of FRET efficiency and interacting population fraction. Many FRET experiments exploit the highly specific labelling of genetically expressed fluorescent proteins, applicable in live cells and organisms. Unfortunately, the typical assumption of fast randomization of fluorophore orientations...

  5. High electron mobility through the edge states in random networks of c-axis oriented wedge-shaped GaN nanowalls grown by molecular beam epitaxy

    International Nuclear Information System (INIS)

    Bhasker, H. P.; Dhar, S.; Sain, A.; Kesaria, Manoj; Shivaprasad, S. M.

    2012-01-01

    Transport and optical properties of random networks of c-axis oriented wedge-shaped GaN nanowalls grown spontaneously on c-plane sapphire substrates through molecular beam epitaxy are investigated. Our study suggests a one dimensional confinement of carriers at the top edges of these connected nanowalls, which results in a blue shift of the band edge luminescence, a reduction of the exciton-phonon coupling, and an enhancement of the exciton binding energy. Not only that, the yellow luminescence in these samples is found to be completely suppressed even at room temperature. All these changes are highly desirable for the enhancement of the luminescence efficiency of the material. More interestingly, the electron mobility through the network is found to be significantly higher than that is typically observed for GaN epitaxial films. This dramatic improvement is attributed to the transport of electrons through the edge states formed at the top edges of the nanowalls.

  6. Performance of inverted polymer solar cells with randomly oriented ZnO nanorods coupled with atomic layer deposited ZnO

    International Nuclear Information System (INIS)

    Zafar, Muhammad; Yun, Ju-Young; Kim, Do-Heyoung

    2017-01-01

    Highlights: • Hydrothermally grown, randomly oriented, and low areal density ZnO nanorods have been successfully adopted as the electron transport layer in inverted organic solar cells. • The addition of atomic layer deposited ZnO on the ZnO nanorods effectively enhance the photovoltaic performances of inverted organic solar cells. • The inverted organic solar cells with 5 nm thick-ALD ZnO showed the highest power conversion efficiency of 3.08%, which is an enhancement of approximately 80% compared to the cells without the ALD ZnO layer (PCE = 1.67%). - Abstract: Nanostructuring of the electron transport layer (ETL) in organic photovoltaic cells (OPV) is of great interest because it increases the surface area of the cell and electron transport. In this work, hydrothermally grown, randomly oriented, and low areal density ZnO nanorods (NRs) have been adopted as the ETL, and the effect of adding atomic layer deposited (ALD) ZnO on the ZnO NRs on the inverted organic solar cell performance has been investigated. The fabricated inverted organic solar cell with 5-nm-thick ALD-ZnO grown on the ZnO NRs showed the highest power conversion efficiency (PCE) of 3.08%, which is an enhancement of 85% from that of the cell without ALD-ZnO (PCE = 1.67%). The ultrathin ALD-ZnO was found to act as a curing layer of the surface defects on the hydrothermally grown ZnO NRs, resulting in an improvement in photovoltaic performance.

  7. Performance of inverted polymer solar cells with randomly oriented ZnO nanorods coupled with atomic layer deposited ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Zafar, Muhammad [School of Chemical Engineering, Chonnam National University, 300 Youngbong-dong, Gwangju 500-757 (Korea, Republic of); Yun, Ju-Young [Center for Vacuum, Korea Research Institute of Standards and Science, 267 Gajeong-ro, Daejeon 305-600 (Korea, Republic of); Kim, Do-Heyoung, E-mail: kdhh@chonnam.ac.kr [School of Chemical Engineering, Chonnam National University, 300 Youngbong-dong, Gwangju 500-757 (Korea, Republic of)

    2017-03-15

    Highlights: • Hydrothermally grown, randomly oriented, and low areal density ZnO nanorods have been successfully adopted as the electron transport layer in inverted organic solar cells. • The addition of atomic layer deposited ZnO on the ZnO nanorods effectively enhance the photovoltaic performances of inverted organic solar cells. • The inverted organic solar cells with 5 nm thick-ALD ZnO showed the highest power conversion efficiency of 3.08%, which is an enhancement of approximately 80% compared to the cells without the ALD ZnO layer (PCE = 1.67%). - Abstract: Nanostructuring of the electron transport layer (ETL) in organic photovoltaic cells (OPV) is of great interest because it increases the surface area of the cell and electron transport. In this work, hydrothermally grown, randomly oriented, and low areal density ZnO nanorods (NRs) have been adopted as the ETL, and the effect of adding atomic layer deposited (ALD) ZnO on the ZnO NRs on the inverted organic solar cell performance has been investigated. The fabricated inverted organic solar cell with 5-nm-thick ALD-ZnO grown on the ZnO NRs showed the highest power conversion efficiency (PCE) of 3.08%, which is an enhancement of 85% from that of the cell without ALD-ZnO (PCE = 1.67%). The ultrathin ALD-ZnO was found to act as a curing layer of the surface defects on the hydrothermally grown ZnO NRs, resulting in an improvement in photovoltaic performance.

  8. A Randomized Controlled Trial of Group Coping-Oriented Therapy vs Supportive Therapy in Schizophrenia: Results of a 2-Year Follow-up.

    Science.gov (United States)

    Schaub, Annette; Mueser, Kim T; von Werder, Thomas; Engel, Rolf; Möller, Hans-Jürgen; Falkai, Peter

    2016-07-01

    Over the past 30 years, illness management programs and cognitive-behavioral therapy for psychosis have gained prominence in the treatment of schizophrenia. However, little is known about the long-term benefits of these types of programs when delivered during inpatient treatment following a symptom exacerbation. To evaluate this question, we conducted a randomized controlled trial comparing the long-term effects of a group-based coping-oriented program (COP) that combined the elements of illness management with cognitive behavioral-therapy for psychosis, with an equally intensive supportive therapy (SUP) program. 196 inpatients with DSM-IV schizophrenia were randomized to COP or SUP, each lasting 12 sessions provided over 6-8 weeks. Outcome measures were collected in the hospital at baseline and post-assessment, and following discharge into the community 1 and 2 years later. We compared the groups on rehospitalizations, symptoms, psychosocial functioning, and knowledge about psychosis. Intent-to-treat analyses indicated that patients in COP learned significantly more information about psychosis, and had greater reductions in overall symptoms and depression/anxiety over the treatment and follow-up period than patients in SUP. Patients in both groups improved significantly in other symptoms and psychosocial functioning. There were no differences between the groups in hospitalization rates, which were low. People with schizophrenia can benefit from short-term COPs delivered during the inpatient phase, with improvements sustaining for 2 years following discharge from the hospital. More research is needed to evaluate the long-term impact of coping-oriented and similar programs provided during inpatient treatment. © The Author 2016. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  9. The PULSAR Specialist Care protocol: a stepped-wedge cluster randomized control trial of a training intervention for community mental health teams in recovery-oriented practice.

    Science.gov (United States)

    Shawyer, Frances; Enticott, Joanne C; Brophy, Lisa; Bruxner, Annie; Fossey, Ellie; Inder, Brett; Julian, John; Kakuma, Ritsuko; Weller, Penelope; Wilson-Evered, Elisabeth; Edan, Vrinda; Slade, Mike; Meadows, Graham N

    2017-05-08

    Recovery features strongly in Australian mental health policy; however, evidence is limited for the efficacy of recovery-oriented practice at the service level. This paper describes the Principles Unite Local Services Assisting Recovery (PULSAR) Specialist Care trial protocol for a recovery-oriented practice training intervention delivered to specialist mental health services staff. The primary aim is to evaluate whether adult consumers accessing services where staff have received the intervention report superior recovery outcomes compared to adult consumers accessing services where staff have not yet received the intervention. A qualitative sub-study aims to examine staff and consumer views on implementing recovery-oriented practice. A process evaluation sub-study aims to articulate important explanatory variables affecting the interventions rollout and outcomes. The mixed methods design incorporates a two-step stepped-wedge cluster randomized controlled trial (cRCT) examining cross-sectional data from three phases, and nested qualitative and process evaluation sub-studies. Participating specialist mental health care services in Melbourne, Victoria are divided into 14 clusters with half randomly allocated to receive the staff training in year one and half in year two. Research participants are consumers aged 18-75 years who attended the cluster within a previous three-month period either at baseline, 12 (step 1) or 24 months (step 2). In the two nested sub-studies, participation extends to cluster staff. The primary outcome is the Questionnaire about the Process of Recovery collected from 756 consumers (252 each at baseline, step 1, step 2). Secondary and other outcomes measuring well-being, service satisfaction and health economic impact are collected from a subset of 252 consumers (63 at baseline; 126 at step 1; 63 at step 2) via interviews. Interview-based longitudinal data are also collected 12 months apart from 88 consumers with a psychotic disorder

  10. MOVING: Motivation-Oriented interVention study for the elderly IN Greifswald: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Kleinke, Fabian; Schwaneberg, Thea; Weymar, Franziska; Penndorf, Peter; Ulbricht, Sabina; Lehnert, Kristin; Dörr, Marcus; Hoffmann, Wolfgang; van den Berg, Neeltje

    2018-01-22

    Cardiovascular diseases (CVD) are the leading cause of mortality. In 2014, they were responsible for 38.9% of all causes of death in Germany. One major risk factor for CVD is a lack of physical activity (PA). A health-promoting lifestyle including regular PA and minimizing sitting time (ST) in daily life is a central preventive measure. Previous studies have shown that PA decreases in older age; 2.4-29% of the people aged over 60 years achieve the World Health Organization recommendations. This age group spends on average 9.4 h per day in sedentary activities. To increase PA and decrease ST, a low-threshold intervention, consisting of individualized feedback letters based on objectively measured data of PA and ST, was developed. The research question is: Do individual feedback letters, based on accelerometer data, have a positive effect on PA and ST? MOVING is a two-arm, randomized controlled trial. Inclusion criteria are age ≥ 65 years and the ability to be physically active. Exclusion criteria are the permanent use of a wheelchair and simultaneous participation in another study on PA. At baseline participants who give informed consent will receive general information and recommendations about the positive effects of regular PA and less ST. Participants of both groups will receive an accelerometer device, which records PA and ST over a period of seven consecutive days following by a randomization. Participants in the intervention group will receive automatically generated, individualized feedback letters by mail based on their PA and ST at baseline and at 3-month follow-up. Further follow-up examinations will be carried out at 6 and 12 months. The primary outcome is the increase of PA and the reduction of ST after 6 months in the intervention group compared to the control group. The goal of the study is to examine the effects of a simple feedback intervention on PA and ST in elderly people. We aim to achieve an effect of 20% increase in moderate

  11. Patient Acceptance of Sexual Orientation and Gender Identity Questions on Intake Forms in Outpatient Clinics: A Pragmatic Randomized Multisite Trial.

    Science.gov (United States)

    Rullo, Jordan E; Foxen, Jilian L; Griffin, Joan M; Geske, Jennifer R; Gonzalez, Cesar A; Faubion, Stephanie S; van Ryn, Michelle

    2018-03-09

    To (1) test whether patient attitudes toward intake forms at three Midwestern outpatient clinics are significantly more negative among those who are asked to complete SOGI questions versus those who are not; and (2) gain an in-depth understanding of patient concerns about SOGI questions. Data were collected between 6/29/2015 and 2/29/2016 from new patients (N = 491) who presented at three outpatient clinics in a large academic medical center. This study was originally a quality improvement project, and later, institutional review board approval was obtained for secondary data analysis. Two-stage mixed-methods study. (1) Experimental: New patients at three sites were randomly assigned to complete either routine intake forms (control) or routine intake forms with SOGI questions (experimental); and (2) qualitative: interviews with patients who responded negatively to SOGI questions. There were no significant differences in patient attitudes between experimental and control groups (p > .05). Of those who received SOGI questions, only 3 percent reported being distressed, upset, or offended by the SOGI questions. Collection of SOGI data as a part of the routine clinical patient intake process is not distressing to 97 percent of patients who are heterosexual, cisgender, and older than 50 years. © Health Research and Educational Trust.

  12. Feeling Thanks and Saying Thanks: A Randomized Controlled Trial Examining If and How Socially Oriented Gratitude Journals Work.

    Science.gov (United States)

    O'Connell, Brenda H; O'Shea, Deirdre; Gallagher, Stephen

    2017-10-01

    This study examined the effect of a reflective interpersonal gratitude journal, a reflective-behavioral interpersonal gratitude journal and an active control journal, on primary qualities of well-being and depression. Participants (n = 192; 67.2% female) completed this 3-month longitudinal randomized controlled design. Participants in the reflective-behavioral condition experienced the greatest improvements in affect balance and reductions in depression at immediate posttest. Both gratitude interventions improved affect balance at 1 month, compared to the control. Changes in affect balance for those in the reflective-behavioral condition were mediated by the rate at which people expressed gratitude in their existing relationships. This effect was moderated by participant's baseline depressive status. Expressing felt gratitude to others appears to be a crucial step in deriving benefits, and these benefits may not be limited to the emotionally healthy. Given the applied popularity of gratitude interventions, understanding not only if but also how they work is essential. © 2017 Wiley Periodicals, Inc.

  13. Molybdeno-Aluminizing of Powder Metallurgy and Wrought Ti and Ti-6Al-4V alloys by Pack Cementation process

    International Nuclear Information System (INIS)

    Tsipas, Sophia A.; Gordo, Elena

    2016-01-01

    Wear and high temperature oxidation resistance of some titanium-based alloys needs to be enhanced, and this can be effectively accomplished by surface treatment. Molybdenizing is a surface treatment where molybdenum is introduced into the surface of titanium alloys causing the formation of wear-resistant surface layers containing molybdenum, while aluminizing of titanium-based alloys has been reported to improve their high temperature oxidation properties. Whereas pack cementation and other surface modification methods have been used for molybdenizing or aluminizing of wrought and/or cast pure titanium and titanium alloys, such surface treatments have not been reported on titanium alloys produced by powder metallurgy (PM). Also a critical understanding of the process parameters for simultaneous one step molybdeno-aluminizing of titanium alloys by pack cementation and the predominant mechanism for this process have not been reported. The current research work describes the surface modification of titanium and Ti-6Al-4V prepared by PM by molybdeno-aluminizing and analyzes thermodynamic aspects of the deposition process. Similar coatings are also deposited to wrought Ti-6Al-4V and compared. Characterization of the coatings was carried out using scanning electron microscopy and x-ray diffraction. For both titanium and Ti-6Al-4V, the use of a powder pack containing ammonium chloride as activator leads to the deposition of molybdenum and aluminium into the surface but also introduces nitrogen causing the formation of a thin titanium nitride layer. In addition, various titanium aluminides and mixed titanium aluminium nitrides are formed. The appropriate conditions for molybdeno-aluminizing as well as the phases expected to be formed were successfully determined by thermodynamic equilibrium calculations. - Highlights: •Simultaneous co-deposition of Mo-Al onto powder metallurgy and wrought Ti alloy •Thermodynamic calculations were used to optimize deposition conditions

  14. Molybdeno-Aluminizing of Powder Metallurgy and Wrought Ti and Ti-6Al-4V alloys by Pack Cementation process

    Energy Technology Data Exchange (ETDEWEB)

    Tsipas, Sophia A., E-mail: stsipas@ing.uc3m.es; Gordo, Elena

    2016-08-15

    Wear and high temperature oxidation resistance of some titanium-based alloys needs to be enhanced, and this can be effectively accomplished by surface treatment. Molybdenizing is a surface treatment where molybdenum is introduced into the surface of titanium alloys causing the formation of wear-resistant surface layers containing molybdenum, while aluminizing of titanium-based alloys has been reported to improve their high temperature oxidation properties. Whereas pack cementation and other surface modification methods have been used for molybdenizing or aluminizing of wrought and/or cast pure titanium and titanium alloys, such surface treatments have not been reported on titanium alloys produced by powder metallurgy (PM). Also a critical understanding of the process parameters for simultaneous one step molybdeno-aluminizing of titanium alloys by pack cementation and the predominant mechanism for this process have not been reported. The current research work describes the surface modification of titanium and Ti-6Al-4V prepared by PM by molybdeno-aluminizing and analyzes thermodynamic aspects of the deposition process. Similar coatings are also deposited to wrought Ti-6Al-4V and compared. Characterization of the coatings was carried out using scanning electron microscopy and x-ray diffraction. For both titanium and Ti-6Al-4V, the use of a powder pack containing ammonium chloride as activator leads to the deposition of molybdenum and aluminium into the surface but also introduces nitrogen causing the formation of a thin titanium nitride layer. In addition, various titanium aluminides and mixed titanium aluminium nitrides are formed. The appropriate conditions for molybdeno-aluminizing as well as the phases expected to be formed were successfully determined by thermodynamic equilibrium calculations. - Highlights: •Simultaneous co-deposition of Mo-Al onto powder metallurgy and wrought Ti alloy •Thermodynamic calculations were used to optimize deposition conditions

  15. Comparison of the heat treatment response of SSM-HPDC 6082 and 6004 wrought alloys with A356 and F357 casting alloys

    CSIR Research Space (South Africa)

    Müller, H

    2011-06-01

    Full Text Available advantages, including a faster artificial aging response, higher strength for comparable Mg contents and less sensitivity to prior natural aging on peak strength. However, over-aging occurs earlier in the casting alloys than in the wrought alloys....

  16. Mobile Augmented Reality as a Feature for Self-Oriented, Blended Learning in Medicine: Randomized Controlled Trial

    Science.gov (United States)

    2017-01-01

    Background Advantages of mobile Augmented Reality (mAR) application-based learning versus textbook-based learning were already shown in a previous study. However, it was unclear whether the augmented reality (AR) component was responsible for the success of the self-developed app or whether this was attributable to the novelty of using mobile technology for learning. Objective The study’s aim was to test the hypothesis whether there is no difference in learning success between learners who employed the mobile AR component and those who learned without it to determine possible effects of mAR. Also, we were interested in potential emotional effects of using this technology. Methods Forty-four medical students (male: 25, female: 19, mean age: 22.25 years, standard deviation [SD]: 3.33 years) participated in this study. Baseline emotional status was evaluated using the Profile of Mood States (POMS) questionnaire. Dermatological knowledge was ascertained using a single choice (SC) test (10 questions). The students were randomly assigned to learn 45 min with either a mobile learning method with mAR (group A) or without AR (group B). Afterwards, both groups were again asked to complete the previous questionnaires. AttrakDiff 2 questionnaires were used to evaluate the perceived usability as well as pragmatic and hedonic qualities. For capturing longer term effects, after 14 days, all participants were again asked to complete the SC questionnaire. All evaluations were anonymous, and descriptive statistics were calculated. For hypothesis testing, an unpaired signed-rank test was applied. Results For the SC tests, there were only minor differences, with both groups gaining knowledge (average improvement group A: 3.59 [SD 1.48]; group B: 3.86 [SD 1.51]). Differences between both groups were statistically insignificant (exact Mann Whitney U, U=173.5; P=.10; r=.247). However, in the follow-up SC test after 14 days, group A had retained more knowledge (average decrease of the

  17. Mobile Augmented Reality as a Feature for Self-Oriented, Blended Learning in Medicine: Randomized Controlled Trial.

    Science.gov (United States)

    Noll, Christoph; von Jan, Ute; Raap, Ulrike; Albrecht, Urs-Vito

    2017-09-14

    Advantages of mobile Augmented Reality (mAR) application-based learning versus textbook-based learning were already shown in a previous study. However, it was unclear whether the augmented reality (AR) component was responsible for the success of the self-developed app or whether this was attributable to the novelty of using mobile technology for learning. The study's aim was to test the hypothesis whether there is no difference in learning success between learners who employed the mobile AR component and those who learned without it to determine possible effects of mAR. Also, we were interested in potential emotional effects of using this technology. Forty-four medical students (male: 25, female: 19, mean age: 22.25 years, standard deviation [SD]: 3.33 years) participated in this study. Baseline emotional status was evaluated using the Profile of Mood States (POMS) questionnaire. Dermatological knowledge was ascertained using a single choice (SC) test (10 questions). The students were randomly assigned to learn 45 min with either a mobile learning method with mAR (group A) or without AR (group B). Afterwards, both groups were again asked to complete the previous questionnaires. AttrakDiff 2 questionnaires were used to evaluate the perceived usability as well as pragmatic and hedonic qualities. For capturing longer term effects, after 14 days, all participants were again asked to complete the SC questionnaire. All evaluations were anonymous, and descriptive statistics were calculated. For hypothesis testing, an unpaired signed-rank test was applied. For the SC tests, there were only minor differences, with both groups gaining knowledge (average improvement group A: 3.59 [SD 1.48]; group B: 3.86 [SD 1.51]). Differences between both groups were statistically insignificant (exact Mann Whitney U, U=173.5; P=.10; r=.247). However, in the follow-up SC test after 14 days, group A had retained more knowledge (average decrease of the number of correct answers group A: 0

  18. Impairment-oriented training or Bobath therapy for severe arm paresis after stroke: a single-blind, multicentre randomized controlled trial.

    Science.gov (United States)

    Platz, T; Eickhof, C; van Kaick, S; Engel, U; Pinkowski, C; Kalok, S; Pause, M

    2005-10-01

    To study the effects of augmented exercise therapy time for arm rehabilitation as either Bobath therapy or the impairment-oriented training (Arm BASIS training) in stroke patients with arm severe paresis. Single blind, multicentre randomized control trial. Three inpatient neurorehabilitation centres. Sixty-two anterior circulation ischaemic stroke patients. Random assignment to three group: (A) no augmented exercise therapy time, (B) augmented exercise therapy time as Bobath therapy and (C) augmented exercise therapy time as Arm BASIS training. Fugl-Meyer arm motor score. Secondary measure: Action Research Arm Test (ARA). Ancillary measures: Fugl-Meyer arm sensation and joint motion/pain scores and the Ashworth Scale (elbow flexors). An overall effect of augmented exercise therapy time on Fugl-Meyer scores after four weeks was not corroborated (mean and 95% confidence interval (CI) of change scores: no augmented exercise therapy time (n=20) 8.8, 5.2-12.3; augmented exercise therapy time (n=40) 9.9, 6.8-13.9; p = 0.2657). The group who received the augmented exercise therapy time as Arm BASIS training (n=20) had, however, higher gains than the group receiving the augmented exercise therapy time as Bobath therapy (n=20) (mean and 95% CI of change scores: Bobath 7.2, 2.6-11.8; BASIS 12.6, 8.4-16.8; p = 0.0432). Passive joint motion/pain deteriorated less in the group who received BASIS training (mean and 95% CI of change scores: Bobath -3.2, -5.2 to -1.1; BASIS 0.1, -1.8-2.0; p = 0.0090). ARA, Fugl-Meyer arm sensation, and Ashworth Scale scores were not differentially affected. The augmented exercise therapy time as Arm BASIS training enhanced selective motor control. Type of training was more relevant for recovery of motor control than therapeutic time spent.

  19. Cognitively oriented behavioral rehabilitation in combination with Qigong for patients on long-term sick leave because of burnout: REST--a randomized clinical trial.

    Science.gov (United States)

    Stenlund, Therese; Ahlgren, Christina; Lindahl, Bernt; Burell, Gunilla; Steinholtz, Katarina; Edlund, Curt; Nilsson, Leif; Knutsson, Anders; Birgander, Lisbeth Slunga

    2009-01-01

    Despite an increase in the occurrence of burnout, there is no agreement on what kind of rehabilitation these patients should be offered. Primary aim of this study was to evaluate effects on psychological variables and sick leave rates by two different group rehabilitation programs for patients on long-term sick leave because of burnout. Rehabilitation program A (Cognitively oriented Behavioral Rehabilitation (CBR) and Qigong) was compared with rehabilitation program B (Qigong only). In a randomized clinical trial, 96 women and 40 men with a mean age of 41.6 +/- 7.4 years were allocated to one of the two rehabilitation programs. A per-protocol analysis showed no significant difference in treatment efficacy between the groups. Both groups improved significantly over time with reduced levels of burnout, self-rated stress behavior, fatigue, depression, anxiety, obsessive-compulsive symptoms, and sick leave rates. In an intention-to-treat analysis, patients in program A had fewer obsessive-compulsive symptoms and larger effect sizes in self-rated stress behavior and obsessive-compulsive symptoms compared to patients in program B. This study showed no differences in effect between CBR and Qigong compared with Qigong only in a per-protocol analysis. Both rehabilitation programs showed positive effect for patients with burnout.

  20. Designing an orientation program for new faculty.

    Science.gov (United States)

    Holyfield, Lavern J; Berry, Charles W

    2008-12-01

    The Faculty Development Committee (FDC) at Baylor College of Dentistry (BCD) is charged with providing programs and activities that facilitate the success of existing faculty in the constantly changing environment of academia. In response to concerns regarding the challenges wrought by current and projected shortages of dental faculty across the nation, the FDC was prompted to assess development opportunities available to BCD faculty. A professional development resource that we found deficient was a formal, comprehensive orientation program for newly hired faculty. To guide the efforts of the committee in developing this program, a survey was designed and administered during an annual faculty retreat. Respondents were new and junior faculty, senior faculty, and some administrators. The results of the survey to determine requirements for new faculty orientation became the basis for formalizing BCD's new faculty orientation program. This article provides an overview of the new faculty orientation process from design to program implementation and describes the development and use of a faculty survey to determine the fundamental elements of a faculty development program, identification of essential individuals for designing/implementing the program, and implementation of a new faculty orientation program at BCD.

  1. Arm rehabilitation in post stroke subjects: A randomized controlled trial on the efficacy of myoelectrically driven FES applied in a task-oriented approach.

    Science.gov (United States)

    Jonsdottir, Johanna; Thorsen, Rune; Aprile, Irene; Galeri, Silvia; Spannocchi, Giovanna; Beghi, Ettore; Bianchi, Elisa; Montesano, Angelo; Ferrarin, Maurizio

    2017-01-01

    Motor recovery of persons after stroke may be enhanced by a novel approach where residual muscle activity is facilitated by patient-controlled electrical muscle activation. Myoelectric activity from hemiparetic muscles is then used for continuous control of functional electrical stimulation (MeCFES) of same or synergic muscles to promote restoration of movements during task-oriented therapy (TOT). Use of MeCFES during TOT may help to obtain a larger functional and neurological recovery than otherwise possible. Multicenter randomized controlled trial. Eighty two acute and chronic stroke victims were recruited through the collaborating facilities and after signing an informed consent were randomized to receive either the experimental (MeCFES assisted TOT (M-TOT) or conventional rehabilitation care including TOT (C-TOT). Both groups received 45 minutes of rehabilitation over 25 sessions. Outcomes were Action Research Arm Test (ARAT), Upper Extremity Fugl-Meyer Assessment (FMA-UE) scores and Disability of the Arm Shoulder and Hand questionnaire. Sixty eight subjects completed the protocol (Mean age 66.2, range 36.5-88.7, onset months 12.7, range 0.8-19.1) of which 45 were seen at follow up 5 weeks later. There were significant improvements in both groups on ARAT (median improvement: MeCFES TOT group 3.0; C-TOT group 2.0) and FMA-UE (median improvement: M-TOT 4.5; C-TOT 3.5). Considering subacute subjects (time since stroke rehabilitation (57.9%) than in the C-TOT group (33.2%) (difference in proportion improved 24.7%; 95% CI -4.0; 48.6), though the study did not meet the planned sample size. This is the first large multicentre RCT to compare MeCFES assisted TOT with conventional care TOT for the upper extremity. No adverse events or negative outcomes were encountered, thus we conclude that MeCFES can be a safe adjunct to rehabilitation that could promote recovery of upper limb function in persons after stroke, particularly when applied in the subacute phase.

  2. Effect of a Family-Oriented Communication Skills Training Program on Depression, Anxiety, and Stress in Older Adults: A Randomized Clinical Trial.

    Science.gov (United States)

    Ghazavi, Zahra; Feshangchi, Simin; Alavi, Mousa; Keshvari, Mahrokh

    2016-03-01

    Older adults face several physical and psychological problems such as hearing loss, vision loss, and memory loss, which diminish the quality of their communication. Poor communication in turn affects their psychological wellbeing and induces substantial depression, anxiety, and stress. The family has an important role in the mental health of older adults. This study aimed to investigate the effect of a family-oriented communication skills training program on depression, anxiety, and stress in older adults. For this randomized controlled clinical trial, we enrolled 64 older adults from two healthcare centers affiliated to the Isfahan University of Medical Sciences. The subjects were randomly allocated to an experimental group (n = 32) and a control group (n = 32). In the experimental group, older adults along with their primary caregiver participated in six sessions of communication skill education. The control group participated in two training sessions on nutrition and exercise. All participants answered the DASS21 questionnaire three times-at the start of the study, at the end of the sixth week, and a month after the last educational session of the experimental group. Data were analyzed using chi-square, Fisher's exact and t tests and by repeated measures analysis of variance (ANOVA). In the experimental group, the mean depression score significantly reduced from 10.56 ± 3.34 before intervention to 7.46 ± 2.80 and 6.30 ± 2.75 after intervention and at follow-up, respectively; the mean anxiety score significantly reduced from 8.46 ± 1.88 before intervention to 5.83 ± 1.93 and 5.80 ± 2.12 after intervention and at follow-up, respectively; and the mean stress score significantly decreased from 11.40 ± 4.53 before intervention to 8.90 ± 3.81 and 8.43 ± 3.31 after intervention and at follow-up, respectively (P communication skills could reduce depression, anxiety, and stress in the elderly. Therefore, such programs should be adopted as a non

  3. Polarized Radiative Transfer of a Cirrus Cloud Consisting of Randomly Oriented Hexagonal Ice Crystals: The 3 x 3 Approximation for Non-Spherical Particles

    Science.gov (United States)

    Stamnes, S.; Ou, S. C.; Lin, Z.; Takano, Y.; Tsay, S. C.; Liou, K.N.; Stamnes, K.

    2016-01-01

    The reflection and transmission of polarized light for a cirrus cloud consisting of randomly oriented hexagonal columns were calculated by two very different vector radiative transfer models. The forward peak of the phase function for the ensemble-averaged ice crystals has a value of order 6 x 10(exp 3) so a truncation procedure was used to help produce numerically efficient yet accurate results. One of these models, the Vectorized Line-by-Line Equivalent model (VLBLE), is based on the doubling- adding principle, while the other is based on a vector discrete ordinates method (VDISORT). A comparison shows that the two models provide very close although not entirely identical results, which can be explained by differences in treatment of single scattering and the representation of the scattering phase matrix. The relative differences in the reflected I and Q Stokes parameters are within 0.5 for I and within 1.5 for Q for all viewing angles. In 1971 Hansen showed that for scattering by spherical particles the 3 x 3 approximation is sufficient to produce accurate results for the reflected radiance I and the degree of polarization (DOP), and he conjectured that these results would hold also for non-spherical particles. Simulations were conducted to test Hansen's conjecture for the cirrus cloud particles considered in this study. It was found that the 3 x 3 approximation also gives accurate results for the transmitted light, and for Q and U in addition to I and DOP. For these non-spherical ice particles the 3 x 3 approximation leads to an absolute error 2 x 10(exp -6) for the reflected and transmitted I, Q and U Stokes parameters. Hence, it appears to be an excellent approximation, which significantly reduces the computational complexity and burden required for multiple scattering calculations.

  4. Nuclear magnetic relaxation induced by exchange-mediated orientational randomization: longitudinal relaxation dispersion for a dipole-coupled spin-1/2 pair.

    Science.gov (United States)

    Chang, Zhiwei; Halle, Bertil

    2013-10-14

    In complex biological or colloidal samples, magnetic relaxation dispersion (MRD) experiments using the field-cycling technique can characterize molecular motions on time scales ranging from nanoseconds to microseconds, provided that a rigorous theory of nuclear spin relaxation is available. In gels, cross-linked proteins, and biological tissues, where an immobilized macromolecular component coexists with a mobile solvent phase, nuclear spins residing in solvent (or cosolvent) species relax predominantly via exchange-mediated orientational randomization (EMOR) of anisotropic nuclear (electric quadrupole or magnetic dipole) couplings. The physical or chemical exchange processes that dominate the MRD typically occur on a time scale of microseconds or longer, where the conventional perturbation theory of spin relaxation breaks down. There is thus a need for a more general relaxation theory. Such a theory, based on the stochastic Liouville equation (SLE) for the EMOR mechanism, is available for a single quadrupolar spin I = 1. Here, we present the corresponding theory for a dipole-coupled spin-1/2 pair. To our knowledge, this is the first treatment of dipolar MRD outside the motional-narrowing regime. Based on an analytical solution of the spatial part of the SLE, we show how the integral longitudinal relaxation rate can be computed efficiently. Both like and unlike spins, with selective or non-selective excitation, are treated. For the experimentally important dilute regime, where only a small fraction of the spin pairs are immobilized, we obtain simple analytical expressions for the auto-relaxation and cross-relaxation rates which generalize the well-known Solomon equations. These generalized results will be useful in biophysical studies, e.g., of intermittent protein dynamics. In addition, they represent a first step towards a rigorous theory of water (1)H relaxation in biological tissues, which is a prerequisite for unravelling the molecular basis of soft

  5. X-ray photoelectron spectroscopy study of the passive films formed on thermally sprayed and wrought Inconel 625

    Energy Technology Data Exchange (ETDEWEB)

    Bakare, M.S. [Materials, Mechanics and Structures Research Division, Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD (United Kingdom); Voisey, K.T., E-mail: Katy.voisey@nottingham.ac.uk [Materials, Mechanics and Structures Research Division, Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD (United Kingdom); Roe, M.J.; McCartney, D.G. [Materials, Mechanics and Structures Research Division, Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD (United Kingdom)

    2010-11-15

    There is a well known performance gap in corrosion resistance between thermally sprayed corrosion resistant coatings and the equivalent bulk materials. Interconnected porosity has an important and well known effect, however there are additional relevant microstructural effects. Previous work has shown that a compositional difference exists between the regions of resolidified and non-melted material that exist in the as-sprayed coatings. The resolidified regions are depleted in oxide forming elements due to formation of oxides during coating deposition. Formation of galvanic cells between these different regions is believed to decrease the corrosion resistance of the coating. In order to increase understanding of the details of this effect, this work uses X-ray photoelectron spectroscopy (XPS) to study the passive films formed on thermally sprayed coatings (HVOF) and bulk Inconel 625, a commercially available corrosion resistant Ni-Cr-Mo-Nb alloy. Passive films produced by potentiodynamic scanning to 400 mV in 0.5 M sulphuric acid were compared with air-formed films. The poorer corrosion performance of the thermally sprayed coatings was attributed to Ni(OH){sub 2}, which forms a loose, non-adherent and therefore non-protective film. The good corrosion resistance of wrought Inconel 625 is due to formation of Cr, Mo and Nb oxides.

  6. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment

    Directory of Open Access Journals (Sweden)

    Mianmian Bao

    2018-03-01

    Full Text Available Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate, but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti2Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800–850 MPa and antibacterial rate (>91.32%. It was demonstrated that homogeneous distribution and fine Ti2Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

  7. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment.

    Science.gov (United States)

    Bao, Mianmian; Liu, Ying; Wang, Xiaoyan; Yang, Lei; Li, Shengyi; Ren, Jing; Qin, Gaowu; Zhang, Erlin

    2018-03-01

    Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate), but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti 2 Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800-850 MPa and antibacterial rate (>91.32%). It was demonstrated that homogeneous distribution and fine Ti 2 Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

  8. Effect of grain refiner on intermetallic phase formation in directional solidification of 6xxx series wrought Al alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sha, G.; O' Reilly, K.; Cantor, B. [Oxford Univ. (United Kingdom). Centre for Adv. Mat. and Composites; Hamerton, R.; Worth, J.

    2000-07-01

    The effect of a grain refiner on the formation of intermetallic phases in a directionally solidified (Bridgman grown) model 6xxx series wrought Al alloy has been investigated using X-ray diffractometry (XRD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). A base alloy with and without Al-Ti-B grain refiner was directionally solidified in a Bridgman furnace at growth velocities in the range of 5-120 mm/min. In both cases, the Fe-containing intermetallic phases present were found to be mainly {alpha}-AlFeSi and {beta}-AlFeSi. However, in the alloy with grain refiner solidified at 5mm/min, Al{sub 13}Fe{sub 4} was also observed. Quantitative XRD results indicated that the addition of Al-Ti-B grain refiner has a strong influence on the relative quantities of intermetallic phases forming during solidification at different growth velocities, which was also confirmed by TEM observations. TEM observations also show that depending on where the {beta}-AlFeSi particles solidified e.g. grain boundaries or triple grain junctions, the size and morphology of the particles may change dramatically. TiB{sub 2} particles were observed to nucleate {beta}-AlFeSi at low and high growth velocities in the 6xxx series Al alloys. (orig.)

  9. The PULSAR primary care protocol: a stepped-wedge cluster randomized controlled trial to test a training intervention for general practitioners in recovery-oriented practice to optimize personal recovery in adult patients.

    Science.gov (United States)

    Enticott, Joanne C; Shawyer, Frances; Brophy, Lisa; Russell, Grant; Fossey, Ellie; Inder, Brett; Mazza, Danielle; Vasi, Shiva; Weller, Penelope June; Wilson-Evered, Elisabeth; Edan, Vrinda; Meadows, Graham

    2016-12-20

    General practitioners (GPs) in Australia play a central role in the delivery of mental health care. This article describes the PULSAR (Principles Unite Local Services Assisting Recovery) Primary Care protocol, a novel mixed methods evaluation of a training intervention for GPs in recovery-oriented practice. The aim of the intervention is to optimize personal recovery in patients consulting study GPs for mental health issues. The intervention mixed methods design involves a stepped-wedge cluster randomized controlled trial testing the outcomes of training in recovery-oriented practice, together with an embedded qualitative study to identify the contextual enablers and challenges to implementing recovery-oriented practice. The project is conducted in Victoria, Australia between 2013 and 2017. Eighteen general practices and community health centers are randomly allocated to one of two steps (nine months apart) to start an intervention comprising GP training in the delivery of recovery-oriented practice. Data collection consists of cross-sectional surveys collected from patients of participating GPs at baseline, and again at the end of Steps 1 and 2. The primary outcome is improvement in personal recovery using responses to the Questionnaire about the Process of Recovery. Secondary outcomes are improvements in patient-rated measures of personal recovery and wellbeing, and of the recovery-oriented practice they have received, using the INSPIRE questionnaire, the Warwick-Edinburgh Mental Well-being Scale, and the Kessler Psychological Distress Scale. Participant data will be analyzed in the group that the cluster was assigned to at each study time point. Another per-protocol dataset will contain all data time-stamped according to the date of intervention received at each cluster site. Qualitative interviews with GPs and patients at three and nine months post-training will investigate experiences and challenges related to implementing recovery-oriented practice in primary

  10. The effect of Sn addition on aging behavior and mechanical properties of wrought AZ80 magnesium alloy

    International Nuclear Information System (INIS)

    Jiang, Luyao; Zhang, Dingfei; Fan, Xiaowei; Guo, Fei; Hu, Guangshan; Xue, Hansong; Pan, Fusheng

    2015-01-01

    Highlights: • Thermodynamic and precipitation kinetics calculation was used to analyze aging hardening after addition of Sn. • Precipitation sequences were determined by the content of Sn element. • The microstructure of Mg 17 Al 12 discontinuous precipitates were influenced by Mg 2 Sn precipitates. - Abstract: The microstructure and mechanical properties of AZ80 wrought magnesium alloys with varying Sn contents (0, 1, 2 and 4 wt.%) have been studied by thermodynamic and precipitation kinetics calculation and examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), hardness test and uniaxial tensile test at room temperature in this paper. The results of thermodynamic and precipitation kinetics calculation showed that the precipitation sequences were determined by the content of Sn element. It was found that in the aging treatment of this work, Mg 17 Al 12 phase precipitated sooner than Mg 2 Sn phase in the alloys with less than 1.72 wt.% Sn and there was a contrary precipitation sequence of these two phases in the alloys with more than 1.72 wt.% Sn. Experimental results were in agreement with those of calculation. According to SEM and TEM observation, Sn promoted precipitation of Mg 17 Al 12 on aging temperature, however the preferential Mg 2 Sn phase suppressed discontinuous Mg 17 Al 12 precipitates by hindering the growth of these in their growth direction. AZ80 with 1–2 wt.% Sn as-aged alloys exhibited outstanding mechanical property that UTS, YS and EL were ∼420 MPa, ∼290 MPa and ∼5%, respectively

  11. German Orientalism

    OpenAIRE

    Margaret Olin

    2011-01-01

    Review of: Suzanne L. Marchand, German Orientalism in the Age of Empire: Religion, Race and Scholarship, Cambridge and Washington, D.C.: Cambridge University Press, 2009. This analysis of Suzanne L. Marchand’s German Orientalism in the Age of Empire: Religion, Race and Scholarship reads her contribution in part against the background of Edward Said’s path breaking book Orientalism. Differences lie in her more expansive understanding of the term ‘Oriental’ to include the Far East and her conce...

  12. What Women Have Wrought.

    Science.gov (United States)

    Murphy, Marjorie

    1988-01-01

    Reviews four books: "Counter Cultures" (Susan Porter Benson); "Once a Cigar Maker" (Patricia A. Cooper); "To Toil the Livelong Day" (Carol Groneman and Mary Beth North eds.); and "Gender at Work" (Ruth Milkman). The works examine cultural stereotypes about the nature of work and women and they attempt to dispel the ideas that women are less…

  13. Final Report, Volume 4, The Develpoment of Qualification Standards forCast Super Duplex Stainless Steel (2507 Wrought Equivalent)

    Energy Technology Data Exchange (ETDEWEB)

    Hariharan, Vasudevan; Lundin, Carl, D.

    2005-09-30

    The objective of the program is to determine the suitability of ASTM A923 Standard Test methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic-Ferritic Stainless Steels for 25 Cr Cast Super Duplex Stainless Steels (ASTM A890-5A). Different tests were carried out on the materials procured from various steel foundries as stated in the ASTM A923. The foundries were designated as Foundry A, B, C and D. All the materials were foundry solution annealed. Materials from Foundry D were solution heat treated at The University of Tennessee also and then they were subjected to heat treatment schedule which was derived from the testing of wrought DSS to establish the A923 specification. This was possible because the material from the same heat was sufficient for conducting the full scope of heat treatment. This was done prior to carrying out various other tests. Charpy samples were machined. The Ferrite content was measured in all the Charpy samples using Feritscope{reg_sign} and ASTM E562 Manual Point Count Method. After the ferrite content was measured the samples were sent to AMC-Vulcan, Inc. in Alabama to conduct the Charpy impact test based on ASTM A923 Test Method B. This was followed by etch testing and corrosion analysis based on ASTM A923 Test Methods A and C respectively at University of Tennessee. Hardness testing using Rockwell B and C was also carried out on these samples. A correlation was derived between all the three test methods and the best method for evaluating the presence of intermetallic in the material was determined. The ferrite content was correlated with the toughness values. Microstructural analysis was carried out on the etch test samples using Scanning Electron Microscopy in order to determine if intermetallic phases were present. The fracture surfaces from Charpy test specimens were also observed under SEM in order to determine the presence of any cracks and whether it was a brittle or a ductile fracture. A correlation

  14. Final Report, Volume 4, The Development of Qualification Standards for Cast Super Duplex Stainless Steel (2507 Wrought Equivalent)

    Energy Technology Data Exchange (ETDEWEB)

    Hariharan, Vasudevan; Lundin, Carl, W.

    2005-09-30

    The objective of the program is to determine the suitability of ASTM A923 Standard Test methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic-Ferritic Stainless Steels for 25 Cr Cast Super Duplex Stainless Steels (ASTM A890-5A). Different tests were carried out on the materials procured from various steel foundries as stated in the ASTM A923. The foundries were designated as Foundry A, B, C and D. All the materials were foundry solution annealed. Materials from Foundry D were solution heat treated at The University of Tennessee also and then they were subjected to heat treatment schedule which was derived from the testing of wrought DSS to establish the A923 specification. This was possible because the material from the same heat was sufficient for conducting the full scope of heat treatment. This was done prior to carrying out various other tests. Charpy samples were machined. The Ferrite content was measured in all the Charpy samples using Feritscope® and ASTM E562 Manual Point Count Method. After the ferrite content was measured the samples were sent to AMC-Vulcan, Inc. in Alabama to conduct the Charpy impact test based on ASTM A923 Test Method B. This was followed by etch testing and corrosion analysis based on ASTM A923 Test Methods A and C respectively at University of Tennessee. Hardness testing using Rockwell B and C was also carried out on these samples. A correlation was derived between all the three test methods and the best method for evaluating the presence of intermetallic in the material was determined. The ferrite content was correlated with the toughness values. Microstructural analysis was carried out on the etch test samples using Scanning Electron Microscopy in order to determine if intermetallic phases were present. The fracture surfaces from Charpy test specimens were also observed under SEM in order to determine the presence of any cracks and whether it was a brittle or a ductile fracture. A correlation was

  15. Orienteering injuries

    OpenAIRE

    Folan, Jean M.

    1982-01-01

    At the Irish National Orienteering Championships in 1981 a survey of the injuries occurring over the two days of competition was carried out. Of 285 individual competitors there was a percentage injury rate of 5.26%. The article discusses the injuries and aspects of safety in orienteering.

  16. Pattern recognition in bees : orientation discrimination

    NARCIS (Netherlands)

    Hateren, J.H. van; Srinivasan, M.V.; Wait, P.B.

    1990-01-01

    Honey bees (Apis mellifera, worker) were trained to discriminate between two random gratings oriented perpendicularly to each other. This task was quickly learned with vertical, horizontal, and oblique gratings. After being trained on perpendicularly-oriented random gratings, bees could discriminate

  17. Exfoliation of GaAs caused by MeV 1H and 4He ion implantation at left angle 100 right angle , left angle 110 right angle axial and random orientations

    International Nuclear Information System (INIS)

    Rauhala, E.; Raeisaenen, J.

    1994-01-01

    The exfoliation procedure of the ion range determination of gaseous implants in single crystal GaAs is investigated. The correlation of the observed crater depth with the ion range is studied for random, left angle 100 right angle and left angle 110 right angle axial orientation high dose implantations of 1.5-2.5 MeV 1 H and 4 He ions. Depending on the experimental conditions, the crater depths corresponded to range values between the modal range and the range maximum. The observed crater depths could be related to the actual He concentration depth distributions by determining the profiles of the 4 He implants by 2.7 MeV proton backscattering. The implantation parameters affecting the exfoliation process, and especially the increase rate of the sample temperature, are investigated. The range distribution parameters for the 1.5 MeV 4 He implants are presented. ((orig.))

  18. Soft and Hard Tissue Changes around Tissue-Oriented Tulip-Design Implant Abutments: A 1-Year Randomized Prospective Clinical Trial.

    Science.gov (United States)

    Gutmacher, Zvi; Levi, Guy; Blumenfeld, Israel; Machtei, Eli E

    2015-10-01

    The advantages of platform switching using narrower abutments remain controversial. Many researchers suggest that platform switching can yield enhanced clinical results, while others remain skeptical. We hypothesize that the effectiveness of platform switching might be associated with the degree of reduction in size of the abutment. To radiographically and clinically examine a new abutment design created to move the implant-abutment interface farther medially. This was a prospective, randomized controlled clinical trial that included 27 patients (41 MIS Lance Plus® implants; MIS Implant Technologies, Karmiel, Israel). The patients' age ranged from 39 to 75 years. At the second stage of the surgery, the implants were randomly assigned to either the new platform switch Tulip abutment (TA) design or to the standard platform abutment (SA). Implant probing depth (IPD) and bleeding on probing (BOP) were recorded at baseline and after 12 months. Standardized periapical radiographs were taken (at baseline and at 12 months) and the marginal bone height measured. All implants were successfully integrated. The mean IPD at 1 year post-op was 2.91 mm for the SA group and 2.69 mm for the TA group (p > .05). Similarly, the BOP at 1 year was almost identical in both groups. The mean values of bone resorption at baseline were 0.98 ± 0.37 mm and 0.69 ± 0.20 for the TA and SA groups, respectively (p > .05). Bone loss (baseline to 12 months) was significantly greater in the SA group compared with the TA group. Use of the new TA, with its significantly downsized diameter, resulted in reduced bone loss at 1 year. Further research will be required to assess the long-term effect of this abutment on peri-implant health. © 2014 Wiley Periodicals, Inc.

  19. Orienteering club

    CERN Multimedia

    Club d'orientation

    2015-01-01

    Course d'orientation La reprise des courses d’orientation était attendue dans la région puisque près de 150 coureurs ont participé à la première épreuve automnale organisée par le club d’orientation du CERN sur le site de La Faucille. Les circuits ont été remportés par Yann Locatelli du club d’Orientation Coeur de Savoie avec 56 secondes d’avance sur Damien Berguerre du club SOS Sallanches pour le parcours technique long, Marie Vuitton du club CO CERN (membre également de l’Equipe de France Jeune) pour le parcours technique moyen avec presque 4 minutes d’avance sur Jeremy Wichoud du club Lausanne-Jorat, Victor Dannecker pour le circuit technique court devant Alina Niggli, Elliot Dannecker pour le facile moyen et Alice Merat sur le facile court, tous membres du club O’Jura. Les résultats comp...

  20. Oriental cholangiohepatitis

    International Nuclear Information System (INIS)

    Scheible, F.W.; Davis, G.B.; California Univ., San Diego, La Jolla

    1981-01-01

    The recent influx of immigrants from Southeast Asia into the United States has increased the likelihood of encountering unusual diseases heretofore rarely seen in this country. Among these disorders is Oriental cholangiohepatitis, a potentially life-threatening process whose early diagnosis is facilitated by roentgenographic findings. Ultrasonography can also provide useful information, although potential pitfalls in diagnosis should be recognized. (orig.)

  1. Oriental cholangiohepatitis

    Energy Technology Data Exchange (ETDEWEB)

    Scheible, F.W.; Davis, G.B.

    1981-07-15

    The recent influx of immigrants from Southeast Asia into the United States has increased the likelihood of encountering unusual diseases heretofore rarely seen in this country. Among these disorders is Oriental cholangiohepatitis, a potentially life-threatening process whose early diagnosis is facilitated by roentgenographic findings. Ultrasonography can also provide useful information, although potential pitfalls in diagnosis should be recognized.

  2. Orientation Club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    COURSE ORIENTATION Résultats de samedi 10 mai    C’est sur une carte entièrement réactualisée dans les bois de Versoix, que plus de 100 coureurs sont venus participer à la course d’orientation, type longue distance, préparée par des membres du club du CERN. Le terrain plutôt plat nécessitait une orientation à grande vitesse, ce qui a donné les podiums suivants :  Technique long avec 17 postes : 1er Jurg Niggli, O’Jura en 52:48, 2e Beat Muller, COLJ Lausanne-Jorat en 58:02, 3e Christophe Vuitton, CO CERN en 58:19 Technique moyen avec 13 postes : 1er Jean-Bernard Zosso, CO CERN, en 46:05 ; 2e Yves Rousselot, Balise 25 Besançon, en 55:11 ; 3e Laurent Merat, O'Jura, en 55:13 Technique court avec 13 postes : 1er Julien Vuitton, CO CERN en 40:59, 2e Marc Baumgartner, CO CERN en 43:18, 3e Yaelle Mathieu en 51:42 Su...

  3. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation ce printemps Le Club d’orientation du CERN vous invite à venir découvrir la course d’orientation et vous propose, en partenariat avec d’autres clubs de la région, une dizaine de courses populaires. Celles-ci ont lieu les samedis après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Si vous êtes débutant vous pouvez profiter d’une petite initiation offerte par l’organisateur avant de vous lancer sur un parcours. Divers types de parcours sont à votre choix lors de chaque épreuve : facile court (2-3 km), facile moyen (3-5 km), technique court (3-4 km), technique moyen (4-5 km) et technique long (5-7 km). Les dates à retenir sont les suivantes : Samedi 23 mars: Pully (Vd) Samedi 13 avril: Pougny...

  4. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Le soleil enfin de retour a incité nombre de sportifs et promeneurs à nous rejoindre dans la belle forêt de Challex /Pougny pour la deuxième étape de notre coupe de printemps 2013. Certains sont revenus crottés et fourbus alors que d’autres avaient les joues bien roses après un grand bol d’air frais. Mais tous avaient passé un agréable moment dans la nature. Nous rappelons que nos activités sont ouvertes à tous, jeunes, moins jeunes, sportifs, familles, du CERN ou d’ailleurs, et que le seul inconvénient est que si vous goûtez à la course d’orientation, il vous sera difficile de ne pas y revenir ! Samedi 20 avril 2013, nous serons sur le Mont Mourex (entre Gex et Divonne) pour notre prochaine épreuve et vous y serez les bienvenus. Les inscriptions et les départ...

  5. Orienteering club

    CERN Multimedia

    Club d’Orientation du CERN

    2015-01-01

    Courses d’orientation Nouvelle saison nouveau programme Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une dizaine de courses populaires comptant pour la coupe Genevoise de printemps: samedi 28 mars: Vernand Dessus samedi 18 avril: Pougny/Challex samedi 25 avril: Chancy/Valleiry samedi 2 mai: Mauvernay samedi 9 mai: Longchaumois samedi 16 mai: Genolier samedi 30 mai: Prevondavaux samedi 6 juin: Biere-Ballens samedi 13 juin: Haut-Jura samedi 20 juin: Bonmont - Finale Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Les inscriptions se font sur place le jour de l’épreuve. Si vous êtes débutant, vous pouvez profiter d’une initiation offerte par l’organisateur avant de vous lancer sur un parcours. Le club propose aussi...

  6. Orienteering club

    CERN Multimedia

    Orienteering Club

    2016-01-01

    Course d'orientation Calendrier des courses d’orientation Coupe genevoise d’automne 2016 Samedi 3 septembre : La Faucille (01) Samedi 10 septembre : Prémanon (39) Samedi 17 septembre : Saint-Cergue (VD) Samedi 24 septembre : Jorat / Corcelles (VD) Samedi 1 octobre: Bière - Ballens (VD) -relais Vendredi 14 octobre : Parc Mon Repos (GE) - nocturne Samedi 15 octobre : Terrasse de Genève (74) Samedi 29 octobre : Bonmont (VD) Samedi 5 novembre : Pomier (74) – one-man-relay - Finale   Courses ouvertes à toutes et à tous, sportifs, familles, débutants ou confirmés, du CERN ou d’ailleurs. Cinq circuits disponibles, ceci va du facile court (2 km) adapté aux débutants et aux enfants jusqu’au parcours technique long de 6 km pour les chevronnés en passant par les parcours facile moyen (4&am...

  7. COURSE ORIENTATION

    CERN Multimedia

    Club d'orientation du CERN

    2015-01-01

      Les coureurs d’orientation de la région se sont donné rendez-vous samedi dernier dans les bois de Pougny/Challex lors de l’épreuve organisée par le club d’orientation du CERN. La carte proposée pour les 5 circuits offrait aussi bien un coté très technique avec un relief pentu qu’un coté avec de grandes zones plates à forêt claire. Le parcours technique long comportant 20 postes a été remporté par Beat Muller du COLJ Lausanne en 56:26 devançant Denis Komarov, CO CERN en 57:30 et Yvan Balliot, ASO Annecy en 57:46. Pour les autres circuits les résultats sont les suivants: Technique moyen (13 postes): 1er Joël Mathieu en 52:32 à une seconde du 2e Vladimir Kuznetsov, COLJ Lausanne-Jorat, 3e Jean-Bernard Zosso, CO CERN, en 54:01 Technique court (12 postes): 1er Lennart Jirden, ...

  8. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2013-01-01

    Course d’orientation Face aux Championnats de France des Clubs à Poitiers, et à une météo hivernale (vent glaciale et pluie), il ne restait qu’une cinquantaine d’orienteurs pour participer à l’épreuve organisée le samedi 25 mai à Grange-Malval. Les participants ont tout de même bien apprécié les 5 circuits proposés par le Satus Genève. Les résultats sont disponibles sur notre site http://cern.ch/club-orientation. En plus des résultats, vous pourrez noter des informations sur la nouvelle école de CO encadrée par B. Barge, Prof. EPS à Ferney-Voltaire pour les jeunes à partir de 6 ans. La prochaine étape de la coupe genevoise se déroulera samedi 1er juin à Morez (39). Epreuve organisée par le club O’Jura&nb...

  9. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    COURSE ORIENTATION Finale de la coupe d’automne Le club d’orientation du CERN (COC Genève) a organisé sa dernière course populaire de la saison samedi 4 novembre au lieu-dit Les Terrasses de Genève (74). Cette 9e épreuve qui se courait sous la forme d’un One-Man-Relay, clôturait ainsi la coupe genevoise d’automne dont les lauréats sont : Circuit technique long : 1. Julien Vuitton (COC Genève), 2. Berni Wehrle (COC Genève), 3. Christophe Vuitton (COC Genève). Circuit technique moyen : 1. Vladimir Kuznetsov (Lausanne-Jorat), 2. J.-Bernard Zosso (COC Genève), 3. Laurent Merat (O’Jura). Circuit technique court : 1. Thibault Rouiller (COC Genève), 2. exæquo Lennart Jirden (COC Genève) et Katya Kuznetsova (Lausanne-Jorat). Circuit facile moyen : 1. Tituan Barge ...

  10. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    COURSE ORIENTATION Finale de la coupe d’automne Le club d’orientation du CERN (COC Genève) a organisé sa dernière course populaire de la saison samedi 4 novembre au lieu-dit Les Terrasses de Genève (74). Cette 9e épreuve qui se courait sous la forme d’un One-Man-Relay, clôturait ainsi la coupe genevoise d’automne dont les lauréats sont : Circuit technique long : 1. Julien Vuitton (COC Genève), 2. Berni Wehrle (COC Genève), 3. Christophe Vuitton (COC Genève). Circuit technique moyen : 1. Vladimir Kuznetsov (Lausanne-Jorat), 2. J.-Bernard Zosso (COC Genève), 3. Laurent Merat (O’Jura). Circuit technique court : 1. Thibault Rouiller (COC Genève), 2. exæquo Lennart Jirden (COC Genève) et Katya Kuznetsova (Lausanne-Jorat). Circuit facile moyen : 1. Tituan Barge...

  11. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2015-01-01

    Course orientation C’est au pied du Salève, proche du Golf de Bosset, que le club d’orientation du CERN (CO CERN) a organisé samedi 19 septembre une nouvelle épreuve comptant pour la Coupe Genevoise d’automne. La zone « des Terrasses de Genève » avait été cartographiée et mise en service l’année dernière. Les participants ont pu apprécier un terrain ludique avec beaucoup de microreliefs, de points d’eau et de gros rochers, le tout au milieu d’une forêt assez claire et agréable à courir. Sur le parcours technique long, le résultat a été très serré puisque Pierrick Merino du club d’Annecy a gagné avec seulement 9 secondes d’avance sur Gaëtan Vuitton (CO CERN) qui confiait avoir perdu beaucoup du te...

  12. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    Course orientation Les courses d’orientation comptant pour la coupe genevoise de printemps s’enchainent dans la région franco-suisse. Samedi dernier, une bonne centaine de coureurs se sont retrouvés au Mont Mourex où le club du CERN avait préparé la sixième épreuve. A l’issue de la course, les participants confirmaient l’exigence des circuits, à savoir la condition physique et le côté technique du traçage. Le parcours technique long comportant 20 postes a été remporté par Darrell High du Care Vevey en 1:22:38 devançant Beat Muller du COLJ Lausanne-Jorat en 1:25:25 et Alison High également du Care Vevey en 1:28:51. Le circuit technique moyen a été remporté par Christophe Vuitton du CO CERN et le circuit technique court par Claire-Lise Rouiller, CO CERN. Les trois pr...

  13. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    COURSE D’ORIENTATION La finale de la coupe de printemps Après avoir remporté le challenge club, samedi 29 juin lors du relais inter-club à Lausanne, le Club d’orientation du CERN organisait la dernière étape de la coupe genevoise de printemps samedi 5 juin à Saint-Cergue dans les bois de Monteret (Canton de Vaud). Plus de 100 participants se sont déplacés pour venir participer à la finale et découvrir une toute nouvelle carte dans une forêt vallonnée. Les résultats pour chaque circuit de cette étape sont : Technique long : 1. Jurg Niggli du club O’Jura, 2. Clément Poncet, 3. Oystein Midttun. Technique moyen : 1. Zoltan Trocsanyi CO CERN, 2. Christophe Ingold, 3. Christina Falga. Technique court : 1. Pierre-Andre Baum, CARE Vevey, 2. Emese Szunyog, 3. Solène Balay. Facile moyen : 1. Elisa P...

  14. Club Orientation

    CERN Multimedia

    Club d'orientation

    2014-01-01

      COURSE ORIENTATION   Pas moins de 100 concurrents sont venus s’affronter sur les parcours proposés par le club d’orientation du CERN ce samedi 26 avril lors de la 4e étape de la coupe genevoise de printemps. Les podiums ont été attribués à :  Technique long avec 19 postes : 1er Yvan Balliot, ASO Annecy en 1:01:39 ; 2e Dominique Fleurent, ASO Annecy, en 1:05:12 ; 3e Rémi Fournier, SOS Sallanches, en 1:05:40. Technique moyen avec 14 postes : 1er Jean-Bernard Zosso, CO CERN, en 46:42 ; 2e Céline Zosso, CO CERN, en 50:51 ; 3e Clément Poncet, O’Jura Prémanon, en 51:27. Technique court avec 13 postes : 1er Jaakko Murtomaki, YKV Seinaejoki, en 36:04 ; 2e Marc Baumgartner en 41:27 ; 3e Natalia Niggli, O’Jura Prémanon, en 52:43. Sur les parcours facile moyen et facile court, victoire respectivement de Stéphanie...

  15. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    Calendrier des courses de la Coupe Genevoise – printemps 2017 Club d'orientation - Julien,  jeune membre du club. Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une série de courses populaires, qui se dérouleront des deux côtés de la frontière franco-suisse, à savoir : Samedi 1 avril : Pougny/Challex (01) Samedi 8 avril: Ballens (VD) Samedi 22 avril: Apples (VD) Samedi 29 avril: Mont Mussy (01) Samedi 6 mai: Prémanon (39) Samedi 13 mai: Mont Mourex (01) Samedi 20 mai: Prévondavaux (VD) Samedi 10 juin: Chancy/Valleiry (74) Samedi 17 juin: Trélex - Finale (VD) Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel. Les inscriptions sur un des 5 parcours proposés se font sur place le jour de l...

  16. Effects of as-cast and wrought Cobalt-Chrome-Molybdenum and Titanium-Aluminium-Vanadium alloys on cytokine gene expression and protein secretion in J774A.1 macrophages

    DEFF Research Database (Denmark)

    Jakobsen, Stig Storgaard; Larsen, Agnete; Stoltenberg, Meredin

    2007-01-01

    to the metal implant and wear-products. The aim of the present study was to compare surfaces of as-cast and wrought Cobalt-Chrome-Molybdenum (CoCrMo) alloys and Titanium-Aluminium-Vanadium (TiAlV) alloy when incubated with mouse macrophage J774A.1 cell cultures. Changes in pro- and anti-inflammatory cytokines...... transcription, the chemokine MCP-1 secretion, and M-CSF secretion by 77%, 36%, and 62%, respectively. Furthermore, we found that reducing surface roughness did not affect this reduction. The results suggest that as-cast CoCrMo alloy is more inert than wrought CoCrMo and wrought TiAlV alloys and could prove...... the cell viability. Surface properties of the discs were characterised with a profilometer and with energy dispersive X-ray spectroscopy. We here report, for the first time, that the prosthetic material surface (non-phagocytable) of as-cast high carbon CoCrMo reduces the pro-inflammatory cytokine IL-6...

  17. Effects of Process Conditions on the Mechanical Behavior of Aluminium Wrought Alloy EN AW-2219 (AlCu6Mn Additively Manufactured by Laser Beam Melting in Powder Bed

    Directory of Open Access Journals (Sweden)

    Michael Cornelius Hermann Karg

    2017-01-01

    Full Text Available Additive manufacturing is especially suitable for complex-shaped 3D parts with integrated and optimized functionality realized by filigree geometries. Such designs benefit from low safety factors in mechanical layout. This demands ductile materials that reduce stress peaks by predictable plastic deformation instead of failure. Al–Cu wrought alloys are established materials meeting this requirement. Additionally, they provide high specific strengths. As the designation “Wrought Alloys” implies, they are intended for manufacturing by hot or cold working. When cast or welded, they are prone to solidification cracks. Al–Si fillers can alleviate this, but impair ductility. Being closely related to welding, Laser Beam Melting in Powder Bed (LBM of Al–Cu wrought alloys like EN AW-2219 can be considered challenging. In LBM of aluminium alloys, only easily-weldable Al–Si casting alloys have succeeded commercially today. This article discusses the influences of boundary conditions during LBM of EN AW-2219 on sample porosity and tensile test results, supported by metallographic microsections and fractography. Load direction was varied relative to LBM build-up direction. T6 heat treatment was applied to half of the samples. Pronounced anisotropy was observed. Remarkably, elongation at break of T6 specimens loaded along the build-up direction exceeded the values from literature for conventionally manufactured EN AW-2219 by a factor of two.

  18. Orienting hypnosis.

    Science.gov (United States)

    Hope, Anna E; Sugarman, Laurence I

    2015-01-01

    This article presents a new frame for understanding hypnosis and its clinical applications. Despite great potential to transform health and care, hypnosis research and clinical integration is impaired in part by centuries of misrepresentation and ignorance about its demonstrated efficacy. The authors contend that advances in the field are primarily encumbered by the lack of distinct boundaries and definitions. Here, hypnosis, trance, and mind are all redefined and grounded in biological, neurological, and psychological phenomena. Solutions are proposed for boundary and language problems associated with hypnosis. The biological role of novelty stimulating an orienting response that, in turn, potentiates systemic plasticity forms the basis for trance. Hypnosis is merely the skill set that perpetuates and influences trance. This formulation meshes with many aspects of Milton Erickson's legacy and Ernest Rossi's recent theory of mind and health. Implications of this hypothesis for clinical skills, professional training, and research are discussed.

  19. Oriented Approach

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Moghimi

    2013-12-01

    Full Text Available Promoting productivity is one of the goals of usinginformation technology in organizations. The purpose of this research isexamining the impact of IT on organizational productivity andrecognizing its mechanisms based on process-oriented approach. For thisend, by reviewing the literature of the subject a number of impacts of ITon organizational processes were identified. Then, through interviewswith IT experts, seven main factors were selected and presented in aconceptual model. This model was tested through a questionnaire in 148industrial companies. Data analysis shows that impact of IT onproductivity can be included in the eight major categories: Increasing ofthe Automation, Tracking, Communication, Improvement, Flexibility,Analytic, Coordination and Monitoring in organizational processes.Finally, to improve the impact of information technology onorganizational productivity, some suggestions are presented.

  20. EDITORIAL: Optical orientation Optical orientation

    Science.gov (United States)

    SAME ADDRESS *, Yuri; Landwehr, Gottfried

    2008-11-01

    priority of the discovery in the literature, which was partly caused by the existence of the Iron Curtain. I had already enjoyed contact with Boris in the 1980s when the two volumes of Landau Level Spectroscopy were being prepared [2]. He was one of the pioneers of magneto-optics in semiconductors. In the 1950s the band structure of germanium and silicon was investigated by magneto-optical methods, mainly in the United States. No excitonic effects were observed and the band structure parameters were determined without taking account of excitons. However, working with cuprous oxide, which is a direct semiconductor with a relative large energy gap, Zakharchenya and his co-worker Seysan showed that in order to obtain correct band structure parameters, it is necessary to take excitons into account [3]. About 1970 Boris started work on optical orientation. Early work by Hanle in Germany in the 1920s on the depolarization of luminescence in mercury vapour by a transverse magnetic field was not appreciated for a long time. Only in the late 1940s did Kastler and co-workers in Paris begin a systematic study of optical pumping, which led to the award of a Nobel prize. The ideas of optical pumping were first applied by Georges Lampel to solid state physics in 1968. He demonstrated optical orientation of free carriers in silicon. The detection method was nuclear magnetic resonance; optically oriented free electrons dynamically polarized the 29Si nuclei of the host lattice. The first optical detection of spin orientation was demonstrated by with the III-V semiconductor GaSb by Parsons. Due to the various interaction mechanisms of spins with their environment, the effects occurring in semiconductors are naturally more complex than those in atoms. Optical detection is now the preferred method to detect spin alignment in semiconductors. The orientation of spins in crystals pumped with circularly polarized light is deduced from the degree of circular polarization of the recombination

  1. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Course d'orientation Le coup d’envoi de la coupe genevoise a été donné samedi 31 août dans les bois de Combe Froide à Prémanon. Plus de 150 coureurs avaient fait le déplacement. Les parcours facile court, facile moyen et technique court ont été remportés par des coureurs du club O’Jura - Ulysse Dannecker, Léo Lonchampt, Franck Lonchampt, le technique moyen par Pekka Marti du club Ol Biel Seeland et le technique long par Térence Risse du CA Rosé – également membre de l’équipe nationale suisse des moins de 20 ans. Pour le club du CERN, les meilleures résultats ont été obtenus pas Emese Szunyog sur technique court et Marie Vuitton sur technique moyen avec une 4e place. La prochaine course aura lieu samedi 14 septembre à La Faucille. Le club propose aussi...

  2. Orienteering club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Course d'orientation Finale de la coupe d’automne La dernière épreuve de la coupe d’automne organisée par le club s’est déroulée ce samedi 1er novembre avec une course type «one-man-relay» dans la forêt de Trelex (Vd). Les concurrents des circuits techniques devaient parcourir trois boucles et ceux des circuits «faciles» deux boucles, avec changements de carte. Le parcours technique long a été remporté par un membre du club, Berni Wehrle. A l’issue de cette course, le Président du club, L. Jirden annonçait le classement général de la coupe d’automne, basé sur les 6 meilleurs résultats de la saison : Circuit technique long : 1er Juerg Niggli (O’Jura), 2e Berni Wehrle, 3e Beat Mueller. Circuit technique moyen : 1er Laurent Merat (O&r...

  3. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Course d'orientation Finale de la coupe genevoise Rapide et méthodique, voilà les qualités dont il fallait faire preuve pour remporter la dernière étape de la coupe organisée par le club du CERN dans les bois de Monteret. Il s’agissait d’une course au score où chaque concurrent disposait d’un temps imparti pour poinçonner le maximum de balises. Le parcours technique a été remporté par Tomas Shellman et le parcours facile par Victor Dannecker. Cette dernière étape était aussi décisive pour la désignation des lauréats de la coupe genevoise de printemps. Les résultats officiels étaient donnés par le président du club, L. Jirden : Circuit Technique Long : Berni Wehrle, Bruno Barge, Edvins Reisons Circuit Technique Moyen : J.-Bernard Zosso, ...

  4. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2011-01-01

    Course d'orientation Avec la CO en nocturne organisée par le club du CERN vendredi 14 octobre au stade des Eveaux (Ge), et la CO à Savigny (Vd) proposée par le club de Lausanne-Jorat le lendemain, les étapes de la coupe genevoise d’automne s’enchainent rapidement. Il ne reste plus que 3 rendez-vous pour boucler la saison. Les premières places devraient certainement se jouer entre des membres du club du CERN, du O’Jura ou de Lausanne-Jorat. La prochaine course du club est programmée pour samedi 22 octobre à Pomier, près de Cruseilles. L’accueil se fera à partir de 12h30 et les départs s’échelonneront de 13h à 15h. * * * * * * * Nouvelle belle victoire samedi 8 octobre à Saint Cergue du jeune finlandais Ville Keskisaari (COLJ) en 50:56 devant Jürg Niggli (O’Jura) en 1:03:32, et Alexandre...

  5. Orienteering Club

    CERN Document Server

    Club d'orientation

    2013-01-01

    De jour comme de nuit Les amateurs de course d’orientation ont pu s’en donner à cœur joie ce week-end puisqu’ils avaient la possibilité de courir sur deux épreuves en moins de 24 heures. En effet, le club du CERN organisait une course de nuit aux Evaux et la 7e étape de la coupe genevoise se tenait samedi après-midi dans les bois du Grand Jorat à Savigny. Les vainqueurs pour chaque course sont : Technique long CO de nuit: Julien Charlemagne, SOS Sallanches CO samedi: Philipp Khlebnikov, ANCO   Technique moyen CO de nuit: Céline Zosso, CO CERN CO samedi: Pavel Khlebnikov, ANCO Technique court CO de nuit: Colas Ginztburger, SOS Sallanches CO samedi: Victor Kuznetsov, COLJ Lausannne Facile moyen CO de nuit: Gaëtan Rickenbacher, CO CERN CO samedi: Tamas Szoke   Facile court CO de nuit:Oriane Rickenbacher, CO CERN CO samedi: Katya Kuznetsov...

  6. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2015-01-01

    Course orientation Finale de la coupe genevoise La série des courses de printemps s’est achevée samedi dernier dans les bois de Bonmont (Vaud) avec une épreuve «one-man-relay» organisée par le club. Le vainqueur du parcours technique  long, Yann Locatelli (Club de Chambéry Savoie) a réalisé les deux boucles comportant 24 balises avec presque 6 minutes d’avance sur le second concurrent Domenico Lepori (Club CARE Vevey). Cette dernière étape était aussi décisive pour la désignation des lauréats de la coupe genevoise de printemps, en comptabilisant les 6 meilleurs résultats sur les 10 épreuves. Le podium officiel était donné par le président du club, L. Jirden, qui profitait de l’occasion pour remercier tous les participants et également tous les...

  7. Orienteering Club

    CERN Multimedia

    CLUB D'ORIENTATION

    2013-01-01

    Calendrier de la coupe d’automne Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose, pour cette nouvelle coupe d’automne genevoise, une série de 10 courses. Le club du O’Jura donnera le coup d’envoi le samedi 31 août. Les courses s’enchaîneront selon le calendrier suivant : Samedi 31 août : Prémanon (39) - longue distance Samedi 14 septembre : La Faucille (01) - longue distance Samedi 21 septembre : Saint Cergue (VD) - longue distance Samedi 28 septembre : Ballens (VD) - relais Samedi 5 octobre : La Pile (VD) - longue distance Vendredi 11 octobre : Les Evaux (GE) - nocturne Samedi 12 octobre : Grand Jorat, Savigny (VD) - longue distance Samedi 19 octobre : Terrasses de Genève (74) - longue distance Samedi 26 octobre : Prémanon (39) - longue distance Samedi 2 novembre : Bois Tollot (GE) - score - Finale Les &a...

  8. Orienteering club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Course d'orientation C’est sous un beau soleil samedi 4 octobre que s’est déroulée la 6e étape de la Coupe genevoise d’automne organisée par le club. Plus d’une centaine de concurrents provenant de 7 clubs de CO avaient fait le déplacement pour courir sur un des cinq parcours proposés dans les bois de Trélex-Génolier (VD). Le podium est le suivant : Technique long (5,9 km, 19 postes) : 1er Jurg Niggli, O’Jura (1:00:02); 2e Berni Wehrle, CO CERN (1:06:44); 3e Konrad Ehrbar, COLJ (1:07:08) Technique moyen (4,8 km, 18 postes) : 1er Christophe Vuitton, CO CERN (54:25); 2e J.B. Zosso, CO CERN (1:01:19); 3e Jeremy Wichoud, COLJ (1:06:21) Technique court (3,8 km, 14 postes) : 1er Julien Vuitton, CO CERN (36:19); 2e Vladimir Kuznetsov, COLJ (48:47); 3e Natalia Niggli, O’Jura (50:38) Facile moyen (3,2 km, 11 postes) : 1ère Alina Niggli, O&...

  9. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

    Relais inter-club/Challenge Carlo Milan Samedi dernier, lors de l’épreuve de course d’orientation organisée par le club du O’Jura, le moteur de la discipline était l’esprit d’équipe, puisqu’il était question d’un relais inter-club avec le Challenge Carlo Milan. Les clubs avaient aligné leurs coureurs soit sur le relais technique (trois participants) soit sur le relais facile (deux participants). Côté O’Jura, il fallait noter la participation de François Gonon, champion du monde 2011, côté club du CERN, Marie et Gaëtan Vuitton, jeunes espoirs du club, devaient préparer la piste pour lancer le dernier relayeur. Côté Lausanne-Jorat, il fallait compter sur le très jeune Viktor Kuznetsov. Les 31 équipes engagées n’ont pas m&ea...

  10. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

     Finale de la coupe de printemps   La dernière course d’orientation comptant pour la Coupe de printemps a eu lieu samedi dernier dans le village des Rousses et vers le Fort. Il s’agissait d’un sprint organisé par le club O’Jura. Les temps de course ont avoisiné les 20 minutes que ce soit pour le parcours technique moyen ou technique long. Tous les habitués étaient au rendez-vous pour venir consolider ou améliorer leur place au classement. A l’issue de cette course, le classement général de la Coupe de printemps prenant en compte les 6 meilleurs résultats des 9 courses était établi et les lauréats de chaque catégorie sont les suivants: Circuit technique long : 1er Berni Wehrle, 2e Bruno Barge, 3e Edvins Reisons. Circuit technique moyen : 1er Jean-Bernard Zosso, 2e Cédric Wehrl&...

  11. Orienteering club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    COURSE D’ORIENTATION  De La Rippe à Sauvabellin, la coupe genevoise continue ! Le rendez-vous était donné samedi 8 mai aux amateurs de course d’orientation dans les bois de La Rippe (Canton de Vaud). Cette 6e épreuve était organisée par le Club Satus Grutli de Genève. Il est dommage que les participants n’aient pas été aussi nombreux que lors des dernières courses, les Championnats de France des clubs à Dijon ayant certainement retenus plus d’un compétiteur. La première place est revenue à : – Technique long : Berni Wehrle – Technique moyen : Jean-Bernard Zosso – Technique court : Berni Wehrle – Facile moyen : Peter Troscanyi – Facile court : Claire Droz. Il ne restera plus que deux épreuves ...

  12. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Samedi 20 avril, les organisateurs du Club de CO du CERN ont accueilli au Mont Mourex 70 participants qui n’ont pas hésité à venir malgré la forte bise. Berni Wehrle du CO CERN s’est octroyé la première place en 1:04:49 sur le parcours technique long devant Pyry Kettunen du Saynso Juankoski en 1:06:52, la 3e place revenant à Bruno Barge, CO CERN, à 7 secondes. Les autres parcours ont été remportés par : Technique moyen : 1er Jacques Moisset, Chamonix (47:44), 2e Yves Rousselot, Balise 25 Besançon (57:16), 3e Jean-Bernard Zosso, CO CERN (59:28). Technique court : 1er Victor Kuznetsov, COLJ (51:53), 2e Pierrick Collet, CO CERN (1:12:52), 3e Dominique Balay, CO CERN (1:16:04). Pour les parcours facile moyen et facile court, Ralf Nardini et Léa Nicolas, tous deux du CO CERN, terminaient respectivement premier. Voi...

  13. Effectiveness of a combination of cognitive behavioral therapy and task-oriented balance training in reducing the fear of falling in patients with chronic stroke: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Liu, Tai-Wa; Ng, Gabriel Y F; Ng, Shamay S M

    2018-03-07

    The consequences of falls are devastating for patients with stroke. Balance problems and fear of falling are two major challenges, and recent systematic reviews have revealed that habitual physical exercise training alone cannot reduce the occurrence of falls in stroke survivors. However, recent trials with community-dwelling healthy older adults yielded the promising result that interventions with a cognitive behavioral therapy (CBT) component can simultaneously promote balance and reduce the fear of falling. Therefore, the aim of the proposed clinical trial is to evaluate the effectiveness of a combination of CBT and task-oriented balance training (TOBT) in promoting subjective balance confidence, and thereby reducing fear-avoidance behavior, improving balance ability, reducing fall risk, and promoting independent living, community reintegration, and health-related quality of life of patients with stroke. The study will constitute a placebo-controlled single-blind parallel-group randomized controlled trial in which patients are assessed immediately, at 3 months, and at 12 months. The selected participants will be randomly allocated into one of two parallel groups (the experimental group and the control group) with a 1:1 ratio. Both groups will receive 45 min of TOBT twice per week for 8 weeks. In addition, the experimental group will receive a 45-min CBT-based group intervention, and the control group will receive 45 min of general health education (GHE) twice per week for 8 weeks. The primary outcome measure is subjective balance confidence. The secondary outcome measures are fear-avoidance behavior, balance ability, fall risk, level of activities of daily living, community reintegration, and health-related quality of life. The proposed clinical trial will compare the effectiveness of CBT combined with TOBT and GHE combined with TOBT in promoting subjective balance confidence among chronic stroke patients. We hope our results will provide evidence of a safe

  14. Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate

    International Nuclear Information System (INIS)

    Chen, J.-Y.; Conlon, K.; Xue, L.; Rogge, R.

    2010-01-01

    Research highlights: → Laser cladding of P20 tool steel. → Residual stress analysis of laser clad P20 tool steel. → Microstructure of laser clad P20 tool steel. → Tooling Repair using laser cladding. → Stress reliving treatment of laser clad P20 tool steel. - Abstract: Laser cladding is to deposit desired material onto the surface of a base material (or substrate) with a relatively low heat input to form a metallurgically sound and dense clad. This process has been successfully applied for repairing damaged high-value tooling to reduce their through-life cost. However, laser cladding, which needs to melt a small amount of a substrate along with cladding material, inevitably introduces residual stresses in both clad and substrate. The tensile residual stresses in the clad could adversely affect mechanical performance of the substrate being deposited. This paper presents an experimental study on process-induced residual stresses in laser clad AISI P20 tool steel onto pre-hardened wrought P20 base material and the correlation with microstructures using hole-drilling and neutron diffraction methods. Combined with X-ray diffraction and scanning electron microscopic analyses, the roles of solid-state phase transformations in the clad and heat-affected zone (HAZ) of the substrate during cladding and post-cladding heat treatments on the development and controllability of residual stresses in the P20 clad have been investigated, and the results could be beneficial to more effective repair of damaged plastic injection molds made by P20 tool steel.

  15. Evaluation of wrought Zn-Al alloys (1, 3, and 5 wt % Al) through mechanical and in vivo testing for stent applications.

    Science.gov (United States)

    Bowen, Patrick K; Seitz, Jan-Marten; Guillory, Roger J; Braykovich, Jacob P; Zhao, Shan; Goldman, Jeremy; Drelich, Jaroslaw W

    2018-01-01

    Special high grade zinc and wrought zinc-aluminum (Zn-Al) alloys containing up to 5.5 wt % Al were processed, characterized, and implanted in rats in search of a new family of alloys with possible applications as bioabsorbable endovascular stents. These materials retained roll-induced texture with an anisotropic distribution of the second-phase Al precipitates following hot-rolling, and changes in lattice parameters were observed with respect to Al content. Mechanical properties for the alloys fell roughly in line with strength (190-240 MPa yield strength; 220-300 MPa ultimate tensile strength) and elongation (15-30%) benchmarks, and favorable elastic ranges (0.19-0.27%) were observed. Intergranular corrosion was observed during residence of Zn-Al alloys in the murine aorta, suggesting a different corrosion mechanism than that of pure zinc. This mode of failure needs to be avoided for stent applications because the intergranular corrosion caused cracking and fragmentation of the implants, although the composition of corrosion products was roughly identical between non- and Al-containing materials. In spite of differences in corrosion mechanisms, the cross-sectional reduction of metals in murine aorta was nearly identical at 30-40% and 40-50% after 4.5 and 6 months, respectively, for pure Zn and Zn-Al alloys. Histopathological analysis and evaluation of arterial tissue compatibility around Zn-Al alloys failed to identify areas of necrosis, though both chronic and acute inflammatory indications were present. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 245-258, 2018. © 2017 Wiley Periodicals, Inc.

  16. Sexual Orientation (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Sexual Orientation KidsHealth / For Parents / Sexual Orientation What's in this ... orientation is part of that process. What Is Sexual Orientation? The term sexual orientation refers to the gender ( ...

  17. Read/write properties of oriented longitudinal recording media

    International Nuclear Information System (INIS)

    Uesaka, Y.; Nakatani, Y.; Hayashi, N.; Fukushima, H.

    2001-01-01

    The effect of orientation on the maximum recording density including the thermal stability effect was investigated using computer simulation. The necessary head current for a highly oriented medium is at most 10% larger than that for a 2D random medium. A recording density larger than 300 Gb/in 2 can be achieved with highly oriented media with 30 nm flying height

  18. Effects of as-cast and wrought Cobalt-Chrome-Molybdenum and Titanium-Aluminium-Vanadium alloys on cytokine gene expression and protein secretion in J774A.1 macrophages.

    Science.gov (United States)

    Jakobsen, Stig S; Larsen, A; Stoltenberg, M; Bruun, J M; Soballe, K

    2007-09-11

    Insertion of metal implants is associated with a possible change in the delicate balance between pro- and anti-inflammatory proteins, probably leading to an unfavourable predominantly pro-inflammatory milieu. The most likely cause is an inappropriate activation of macrophages in close relation to the metal implant and wear-products. The aim of the present study was to compare surfaces of as-cast and wrought Cobalt-Chrome-Molybdenum (CoCrMo) alloys and Titanium-Aluminium-Vanadium (TiAlV) alloy when incubated with mouse macrophage J774A.1 cell cultures. Changes in pro- and anti-inflammatory cytokines (TNF-alpha, IL-6, IL-alpha, IL-1beta, IL-10) and proteins known to induce proliferation (M-CSF), chemotaxis (MCP-1) and osteogenesis (TGF-beta, OPG) were determined by ELISA and Real Time reverse transcriptase - PCR (Real Time rt-PCR). Lactate dehydrogenase (LDH) was measured in the medium to asses the cell viability. Surface properties of the discs were characterised with a profilometer and with energy dispersive X-ray spectroscopy. We here report, for the first time, that the prosthetic material surface (non-phagocytable) of as-cast high carbon CoCrMo reduces the pro-inflammatory cytokine IL-6 transcription, the chemokine MCP-1 secretion, and M-CSF secretion by 77%, 36%, and 62%, respectively. Furthermore, we found that reducing surface roughness did not affect this reduction. The results suggest that as-cast CoCrMo alloy is more inert than wrought CoCrMo and wrought TiAlV alloys and could prove to be a superior implant material generating less inflammation which might result in less osteolysis.

  19. Entrepreneurial orientation, market orientation, and competitive environment

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Cadogan, John W.

    This study sheds light on the role that the competitive environment plays in determining how elements of market orientation and elements of entrepreneurial orientation interact to influence business success. We develop a model in which we postulate that market orientation, entrepreneurial...... orientation, and competitive environment shape business performance via a three-way interaction. We test the model using primary data from the CEOs of 270 CEO of manufacturing firms, together with secondary data on these firms' profit performance. An assessment of the results indicates that customer...... orientation moderates the positive relationships between the competitiveness element of entrepreneurial orientation and market share and return on assets (ROA): the positive relationships between competitiveness and market share and competitiveness and ROA become stronger the greater the firms' customer...

  20. Diffusion of oriented particles in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Haber, René [Institut für Physik, Technische Universität Chemnitz, D-09107 Chemnitz (Germany); Centre for Nonlinear Studies, Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn (Estonia); Prehl, Janett [Institut für Physik, Technische Universität Chemnitz, D-09107 Chemnitz (Germany); Herrmann, Heiko [Centre for Nonlinear Studies, Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn (Estonia); Hoffmann, Karl Heinz, E-mail: hoffmann@physik.tu-chemnitz.de [Institut für Physik, Technische Universität Chemnitz, D-09107 Chemnitz (Germany)

    2013-11-29

    Diffusion of particles in porous media often shows subdiffusive behavior. Here, we analyze the dynamics of particles exhibiting an orientation. The features we focus on are geometrical restrictions and the dynamical consequences of the interactions between the local surrounding structure and the particle orientation. This interaction can lead to particles getting temporarily stuck in parts of the structure. Modeling this interaction by a particular random walk dynamics on fractal structures we find that the random walk dimension is not affected while the diffusion constant shows a variety of interesting and surprising features.

  1. Diffusion of oriented particles in porous media

    International Nuclear Information System (INIS)

    Haber, René; Prehl, Janett; Herrmann, Heiko; Hoffmann, Karl Heinz

    2013-01-01

    Diffusion of particles in porous media often shows subdiffusive behavior. Here, we analyze the dynamics of particles exhibiting an orientation. The features we focus on are geometrical restrictions and the dynamical consequences of the interactions between the local surrounding structure and the particle orientation. This interaction can lead to particles getting temporarily stuck in parts of the structure. Modeling this interaction by a particular random walk dynamics on fractal structures we find that the random walk dimension is not affected while the diffusion constant shows a variety of interesting and surprising features.

  2. Theories of Sexual Orientation.

    Science.gov (United States)

    Storms, Michael D.

    1980-01-01

    Results indicated homosexuals, heterosexuals, and bisexuals did not differ within each sex on measures of masculinity and femininity. Strong support was obtained for the hypothesis that sexual orientation relates primarily to erotic fantasy orientation. (Author/DB)

  3. Understanding political market orientation

    DEFF Research Database (Denmark)

    Ormrod, Robert P.; Henneberg, Stephan C.

    influences of such behavior. The study includes structural equation modeling to investigate several propositions. While the results show that political parties need to focus on several different aspects of market-oriented behavior, especially using an internal and external orientation as cultural antecedents......This article develops a conceptual framework and measurement model of political market orientation that consists of attitudinal and behavioural constructs. The article reports on perceived relationships among different behavioral aspects of political market orientation and the attitudinal......, a more surprising result is the inconclusive effect of a voter orientation on market-oriented behaviours. The article discusses the findings in the context of the existing literature in political marketing and commercial market orientation....

  4. Effects of as-cast and wrought Cobalt-Chrome-Molybdenum and Titanium-Aluminium-Vanadium alloys on cytokine gene expression and protein secretion in J774A.1 macrophages

    DEFF Research Database (Denmark)

    Jakobsen, Stig Storgaard; Larsen, Agnete; Stoltenberg, Meredin

    2007-01-01

    the cell viability. Surface properties of the discs were characterised with a profilometer and with energy dispersive X-ray spectroscopy. We here report, for the first time, that the prosthetic material surface (non-phagocytable) of as-cast high carbon CoCrMo reduces the pro-inflammatory cytokine IL-6......Insertion of metal implants is associated with a possible change in the delicate balance between pro- and anti-inflammatory proteins, probably leading to an unfavourable predominantly pro-inflammatory milieu. The most likely cause is an inappropriate activation of macrophages in close relation...... to the metal implant and wear-products. The aim of the present study was to compare surfaces of as-cast and wrought Cobalt-Chrome-Molybdenum (CoCrMo) alloys and Titanium-Aluminium-Vanadium (TiAlV) alloy when incubated with mouse macrophage J774A.1 cell cultures. Changes in pro- and anti-inflammatory cytokines...

  5. On the adaptivity gap of stochastic orienteering

    NARCIS (Netherlands)

    Bansal, N.; Nagarajan, V.

    2013-01-01

    The input to the stochastic orienteering problem consists of a budget $B$ and metric $(V,d)$ where each vertex $v$ has a job with deterministic reward and random processing time (drawn from a known distribution). The processing times are independent across vertices. The goal is to obtain a

  6. On the Adaptivity Gap of Stochastic Orienteering

    NARCIS (Netherlands)

    N. Bansal (Nikhil); V. Nagarajan

    2013-01-01

    htmlabstractThe input to the stochastic orienteering problem consists of a budget B and metric (V,d) where each vertex v has a job with deterministic reward and random processing time (drawn from a known distribution). The processing times are independent across vertices. The goal is to obtain a

  7. On the adaptivity gap of stochastic orienteering

    NARCIS (Netherlands)

    Bansal, N.; Nagarajan, V.; Lee, J.; Vygen, J.

    2014-01-01

    The input to the stochastic orienteering problem [14] consists of a budget B and metric (V,d) where each vertex v¿¿¿V has a job with a deterministic reward and a random processing time (drawn from a known distribution). The processing times are independent across vertices. The goal is to obtain a

  8. On the adaptivity gap of stochastic orienteering

    NARCIS (Netherlands)

    Bansal, N.; Nagarajan, V.

    2015-01-01

    The input to the stochastic orienteering problem (Gupta et al. in SODA, pp 1522–1538,  2012) consists of a budget B and metric (V, d) where each vertex(Formula presented.) has a job with a deterministic reward and a random processing time (drawn from a known distribution). The processing times are

  9. Orientation correlations in aluminium deformed by ECAE

    DEFF Research Database (Denmark)

    Bowen, Jacob R.; Mishin, Oleg; Prangnell, P.B.

    2002-01-01

    Distributions of boundary misorientations measured in an Al–0.13%Mg alloy, processed by equal channel angular extrusion to a von Mises effective strain of 10, have been compared to misorientation distributions generated from a random mix of orientations present in the microstructure. A significan...

  10. Semiconductor monolayer assemblies with oriented crystal faces

    KAUST Repository

    Ma, Guijun; Takata, Tsuyoshi; Katayama, Masao; Zhang, Fuxiang; Moriya, Yosuke; Takanabe, Kazuhiro; Kubota, Jun; Domen, Kazunari

    2012-01-01

    Fabrication of two-dimensional monolayers of crystalline oxide and oxynitride particles was attempted on glass plate substrates. X-Ray diffraction patterns of the assemblies show only specific crystal facets, indicative of the uniform orientation of the particles on the substrate. The selectivity afforded by this immobilization technique enables the organization of randomly distributed polycrystalline powders in a controlled manner.

  11. Entrepreneurial Orientation and Internationalisation

    DEFF Research Database (Denmark)

    Decker, Arnim; Rollnik-Sadowska, Ewa; Servais, Per

    Entrepreneurial orientation is a multidimensional construct that determines the strategic posture of a firm. In this study we investigate a sample of six manufacturing firms which are located both in a remote area and in a transition economy. Through interpreting the construct of entrepreneurial...... orientation as an attitude held by principals we investigate how entrepreneurial orientation affected the behaviour of these firms, specifically in terms of their internationalisation. Despite the fact that all firms have identical roots we find that entrepreneurial orientation held by their principals affect...

  12. Randomization tests

    CERN Document Server

    Edgington, Eugene

    2007-01-01

    Statistical Tests That Do Not Require Random Sampling Randomization Tests Numerical Examples Randomization Tests and Nonrandom Samples The Prevalence of Nonrandom Samples in Experiments The Irrelevance of Random Samples for the Typical Experiment Generalizing from Nonrandom Samples Intelligibility Respect for the Validity of Randomization Tests Versatility Practicality Precursors of Randomization Tests Other Applications of Permutation Tests Questions and Exercises Notes References Randomized Experiments Unique Benefits of Experiments Experimentation without Mani

  13. Random packing of colloids and granular matter

    NARCIS (Netherlands)

    Wouterse, A.

    2008-01-01

    This thesis deals with the random packing of colloids and granular matter. A random packing is a stable disordered collection of touching particles, without long-range positional and orientational order. Experimental random packings of particles with the same shape but made of different materials

  14. Wildlife value orientations

    DEFF Research Database (Denmark)

    Gamborg, Christian; Jensen, Frank Søndergaard

    2016-01-01

    This article examined value orientations toward wildlife among the adult general Danish public in relation to age, sex, past and present residence, education, and income, using a U.S. survey instrument on Wildlife Value Orientations (WVO). The study used an Internet-based questionnaire sent...

  15. Edward Said and "Orientalism"

    Science.gov (United States)

    Chronicle of Higher Education, 2007

    2007-01-01

    In the nearly 30 years since Edward Said published the hugely influential Orientalism, his indictment of racism and imperialism in Western scholarship on the Orient has had its share of plaudits and condemnations. Now Robert Irwin, the Middle East editor of The Times Literary Supplement, has reignited the controversy with his broadside against the…

  16. Orientalism/Occidentalism

    NARCIS (Netherlands)

    Minca, C.; Ong, C.E.

    2017-01-01

    Orientalism and Occidentalism are interrelated concepts. Orientalism is defined in three keys ways: (i) as a study of “the Orient”; (ii) as a cultural and aesthetic concern with “the Orient”; and (iii) as a critical approach to understanding the construction of “the Orient” by European and American

  17. Aspect-Oriented Programming

    NARCIS (Netherlands)

    Bergmans, Lodewijk; Videira Lopes, Cristina; Moreira, Ana; Demeyer, Serge

    1999-01-01

    Aspect-oriented programming is a promising idea that can improve the quality of software by reduce the problem of code tangling and improving the separation of concerns. At ECOOP'97, the first AOP workshop brought together a number of researchers interested in aspect-orientation. At ECOOP'98, during

  18. Object oriented programming

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1990-01-01

    This paper is an introduction to object oriented programming techniques. It tries to explain the concepts by using analogies with traditional programming. The object oriented approach not inherently difficult, but most programmers find a relatively high threshold in learning it. Thus, this paper will attempt to convey the concepts with examples rather than explain the formal theory

  19. Friction Welding For Cladding Applications: Processing, Microstructure and Mechanical Properties of Inertia Friction Welds of Stainless Steel to Low Carbon Steel and Evaluation of Wrought and Welded Austenitic Stainless Steels for Cladding Applications in Acidchloride Service

    Science.gov (United States)

    Switzner, Nathan

    -state mixing. Thirdly, the corrosion resistance of multiple austenitic stainless steels (types 304, 316, and 309) processed in varying ways was compared for acid chloride environments using advanced electrochemical techniques. Physical simulation of fusion claddings and friction weld claddings (wrought stainless steels) was used for sample preparation to determine compositional and microstructural effects. Pitting resistance correlated firstly with Cr content, with N and Mo additions providing additional benefits. The high ferrite fraction of as-welded samples reduced their corrosion resistance. Wrought type 309L outperformed as-welded type 309L in dissolved mass loss and reverse corrosion rate from the potentiodynamic scan in 1.0 N HCl/3.5% NaCl solution. Electrochemical impedance results indicated that wrought 309L and 316L developed a corrosion resistant passive film more rapidly than other alloys in 0.1 N HCl/3.5% NaCl, and also performed well in long term (160-day) corrosion testing in the same environment. Fourthly, to prove the concept of internal CR lining by friction welding, a conical work piece of 304L stainless steel was friction welded internally to 1018 steel.

  20. Rigorous theory of molecular orientational nonlinear optics

    International Nuclear Information System (INIS)

    Kwak, Chong Hoon; Kim, Gun Yeup

    2015-01-01

    Classical statistical mechanics of the molecular optics theory proposed by Buckingham [A. D. Buckingham and J. A. Pople, Proc. Phys. Soc. A 68, 905 (1955)] has been extended to describe the field induced molecular orientational polarization effects on nonlinear optics. In this paper, we present the generalized molecular orientational nonlinear optical processes (MONLO) through the calculation of the classical orientational averaging using the Boltzmann type time-averaged orientational interaction energy in the randomly oriented molecular system under the influence of applied electric fields. The focal points of the calculation are (1) the derivation of rigorous tensorial components of the effective molecular hyperpolarizabilities, (2) the molecular orientational polarizations and the electronic polarizations including the well-known third-order dc polarization, dc electric field induced Kerr effect (dc Kerr effect), optical Kerr effect (OKE), dc electric field induced second harmonic generation (EFISH), degenerate four wave mixing (DFWM) and third harmonic generation (THG). We also present some of the new predictive MONLO processes. For second-order MONLO, second-order optical rectification (SOR), Pockels effect and difference frequency generation (DFG) are described in terms of the anisotropic coefficients of first hyperpolarizability. And, for third-order MONLO, third-order optical rectification (TOR), dc electric field induced difference frequency generation (EFIDFG) and pump-probe transmission are presented

  1. Selective enhancement of orientation tuning before saccades.

    Science.gov (United States)

    Ohl, Sven; Kuper, Clara; Rolfs, Martin

    2017-11-01

    Saccadic eye movements cause a rapid sweep of the visual image across the retina and bring the saccade's target into high-acuity foveal vision. Even before saccade onset, visual processing is selectively prioritized at the saccade target. To determine how this presaccadic attention shift exerts its influence on visual selection, we compare the dynamics of perceptual tuning curves before movement onset at the saccade target and in the opposite hemifield. Participants monitored a 30-Hz sequence of randomly oriented gratings for a target orientation. Combining a reverse correlation technique previously used to study orientation tuning in neurons and general additive mixed modeling, we found that perceptual reports were tuned to the target orientation. The gain of orientation tuning increased markedly within the last 100 ms before saccade onset. In addition, we observed finer orientation tuning right before saccade onset. This increase in gain and tuning occurred at the saccade target location and was not observed at the incongruent location in the opposite hemifield. The present findings suggest, therefore, that presaccadic attention exerts its influence on vision in a spatially and feature-selective manner, enhancing performance and sharpening feature tuning at the future gaze location before the eyes start moving.

  2. Internal stress relaxation and load redistribution during the twinning-detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A

    International Nuclear Information System (INIS)

    Wu, L.; Agnew, S.R.; Brown, D.W.; Stoica, G.M.; Clausen, B.; Jain, A.; Fielden, D.E.; Liaw, P.K.

    2008-01-01

    A study of the internal strain (stress) evolution during cyclic deformation dominated by {101-bar2} twinning and detwinning mechanisms within a magnesium alloy, ZK60A, was conducted using in situ neutron diffraction. It is shown that once the matrix grains twin, the (00.2) matrix and twin grains are relaxed relative to the neighbors. This load redistribution between the soft- and hard-grain orientations is a result of plastic anisotropy. The twins which formed during the initial compression sustain a tensile stress along the c-axis, when the applied compressive stress is less than ∼80 MPa upon unloading. This local (intergranular) tensile stress is hypothesized to be effective for driving the detwinning event under a macroscopic compressive field along the c-axis. The activation stresses, 15 and 6 MPa, respectively, for the {101-bar2} extension twinning and detwinning, are approximated, based on the relaxation of the internal stresses in the matrix and twin grains

  3. Implementing Strategic Orientation

    Science.gov (United States)

    Fischer, Arthur K.; Brownback, Sarah

    2012-01-01

    An HRM case dealing with problems and issues of setting up orientation programs which align with corporate strategy. Discussion concerns how such a case can be used to exhibit the alignment between HRM and business strategy.

  4. FAMily-Oriented Support (FAMOS)

    DEFF Research Database (Denmark)

    Salem, Hanin; Johansen, Christoffer; Schmiegelow, Kjeld

    2017-01-01

    BACKGROUND: We developed and tested the feasibility of a manualized psychosocial intervention, FAMily-Oriented Support (FAMOS), a home-based psychosocial intervention for families of childhood cancer survivors. The aim of the intervention is to support families in adopting healthy strategies...... to cope with the psychological consequences of childhood cancer. The intervention is now being evaluated in a nationwide randomized controlled trial (RCT). METHODS AND DESIGN: FAMOS is based on principles of family systems therapy and cognitive behavioral therapy, and is delivered in six sessions at home...... satisfaction with the format, timing, and content of the intervention. CONCLUSION: The results indicate that the FAMOS intervention is feasible in terms of recruitment, retention, and acceptability. The effects of the intervention on post-traumatic stress, depression, anxiety, family functioning, and quality...

  5. Epitaxy-enabled vapor-liquid-solid growth of tin-doped indium oxide nanowires with controlled orientations

    KAUST Repository

    Shen, Youde; Turner, Stuart G.; Yang, Ping; Van Tendeloo, Gustaaf; Lebedev, Oleg I.; Wu, Tao

    2014-01-01

    challenges in reliably achieving these goals of orientation-controlled nanowire synthesis and assembly. Here we report that growth of planar, vertical and randomly oriented tin-doped indium oxide (ITO) nanowires can be realized on yttria-stabilized zirconia

  6. Use of a fermented dairy probiotic drink containing Lactobacillus casei (DN-114 001) to decrease the rate of illness in kids: the DRINK study. A patient-oriented, double-blind, cluster-randomized, placebo-controlled, clinical trial.

    Science.gov (United States)

    Merenstein, D; Murphy, M; Fokar, A; Hernandez, R K; Park, H; Nsouli, H; Sanders, M E; Davis, B A; Niborski, V; Tondu, F; Shara, N M

    2010-07-01

    To evaluate whether a fermented dairy drink containing the probiotic strain Lactobacillus casei DN-114 001 could reduce the incidence of common infectious diseases (CIDs) and the change of behavior because of illness in children. We conducted a double-blinded, randomized, placebo-controlled allocation concealment clinical trial in the Washington, DC metropolitan area. Participants were 638 children 3-6 years old in daycare/schools. The intervention was a fermented dairy drink containing a specific probiotic strain or matching placebo with no live cultures for 90 consecutive days. Two primary outcomes were assessed: incidence of CIDs and change of behavior because of illness (both assessed by parental report). The rate of change of behavior because of illness was similar among active and control groups. However, the incidence rate for CIDs in the active group (0.0782) is 19% lower than that of the control group (0.0986) (incidence rate ratio=0.81, 95% CI: 0.65, 099) P=0.046. Daily intake of a fermented dairy drink containing the probiotic strain L. casei DN-114 001 showed some promise in reducing overall incidence of illness, but was primarily driven by gastrointestinal infections and there were no differences in change of behavior.

  7. Random sequential adsorption of cubes

    Science.gov (United States)

    Cieśla, Michał; Kubala, Piotr

    2018-01-01

    Random packings built of cubes are studied numerically using a random sequential adsorption algorithm. To compare the obtained results with previous reports, three different models of cube orientation sampling were used. Also, three different cube-cube intersection algorithms were tested to find the most efficient one. The study focuses on the mean saturated packing fraction as well as kinetics of packing growth. Microstructural properties of packings were analyzed using density autocorrelation function.

  8. Random walk on random walks

    NARCIS (Netherlands)

    Hilário, M.; Hollander, den W.Th.F.; Sidoravicius, V.; Soares dos Santos, R.; Teixeira, A.

    2014-01-01

    In this paper we study a random walk in a one-dimensional dynamic random environment consisting of a collection of independent particles performing simple symmetric random walks in a Poisson equilibrium with density ¿¿(0,8). At each step the random walk performs a nearest-neighbour jump, moving to

  9. Oriental upper blepharoplasty.

    Science.gov (United States)

    Weng, Chau-Jin

    2009-02-01

    Aesthetic surgery of the upper eyelids is a very common procedure performed in cosmetic practices around the world. The word blepharoplasty, however, has a different meaning in Asia than it does elsewhere. Orientals have different periorbital anatomic characteristics, their motivations for seeking eyelid treatment are different, and operative techniques have been adapted consequently. There are also many eyelid shapes among Orientals, mostly with regard to the presence and location of the supratarsal fold and/or presence of an epicanthal fold. The surgeon must therefore master a range of surgical procedures to treat these variations adequately. It is critical to know the indications for each blepharoplasty technique as well as their complications to select the right surgery and avoid unfavorable results. Epicanthoplasty performed on the right patient can greatly improve aesthetic results while retaining ethnic characteristics. This article will discuss Oriental eyelid characteristics, preoperative patient assessment, commonly used corrective techniques for the "double-eyelid" creation, and complications and how to avoid them.

  10. Future-Oriented LCA

    DEFF Research Database (Denmark)

    Olsen, Stig Irving; Borup, Mads; Andersen, Per Dannemand

    2018-01-01

    LCA is often applied for decision-making that concerns actions reaching near or far into the future. However, traditional life cycle assessment methodology must be adjusted for the prospective and change-oriented purposes, but no standardised way of doing this has emerged yet. In this chapter some...... challenges are described and some learnings are derived. Many of the future-oriented LCAs published so far perform relatively short-term prediction of simple comparisons. But for more long-term time horizons foresight methods can be of help. Scenarios established by qualified experts about future...... technological and economic developments are indispensable in future technology assessments. The uncertainties in future-oriented LCAs are to a large extent qualitative and it is important to emphasise that LCA of future technologies will provide a set of answers and not ‘the’ answer....

  11. Cultural Orientation and Interdisciplinarity

    DEFF Research Database (Denmark)

    Nielsen, Sofie Søndergaard

    2004-01-01

    I begin the article with an account of the background to the German debate on ‘Literaturwissenschaft als Kulturwissenschaft’, including the introduction of the concept of ’cultural orientation’ as a strategy for achieving interdisciplinarity. This is followed by a consideration of the discussion ...... of the object of literary studies as a way of defining the disciplinarity or identity of literary studies. Finally I summarize some of the characteristics of culturally orientated literary studies.......I begin the article with an account of the background to the German debate on ‘Literaturwissenschaft als Kulturwissenschaft’, including the introduction of the concept of ’cultural orientation’ as a strategy for achieving interdisciplinarity. This is followed by a consideration of the discussion...

  12. Measuring market orientation: further evidence on Narver and Slater's three-component scale.

    Science.gov (United States)

    Chakrabarty, Subhra; Rogé, Joseph N

    2003-12-01

    A mail survey of a national random sample of 2,000 marketing managers was conducted. The data provided by 222 respondents were analyzed to assess the dimensionality of Narver and Slater's 15-item measure of market orientation. A confirmatory factor analysis, using LISREL 8.53, provided support for each of the separate dimensions of customer orientation, competitor orientation, and interfunctional coordination. However, a combined 3-factor model of market orientation was not supported. Directions for research are suggested.

  13. Age and Value Orientations

    Directory of Open Access Journals (Sweden)

    Asya Kh. Kukubayeva

    2013-01-01

    Full Text Available The present article deals with value orientations and their role in men’s lives, particularly, in young people’s lives. This notion was introduced by the American theoretical sociologist T. Parsons, one of the creators of modern theoretical sociology. The scientist made an attempt to construct the structural and analytical theory of social action, combining personal interests (needs and aims and situation, it takes place in. The issue of value orientations remains acute for psychology. Herein we have considered several most important works, relating to the considered issue. Age aspects of young people’s value orientations are of peculiar interest to us. When analyzing this phenomenon, one should take into consideration the psychological formations, inhere for a certain age. In fact every age has its unique structure, which may change when passing from one development stage to another. Basing on this fact, we’ve considered the values, depending on the age features of the youth, relying upon the works of the scientists, working with different categories of the youth, such as: teenagers, students, children of different nationalities. It is not surprising that most scientists have come to the conclusion that the chief role in value orientation belongs to a family, originates in relations with parents and teachers. The positive reinforcement to the future develops throughout life in accordance with a lifestyle of a family, society and political situation in a state.Life orientations as a type of value orientations show different types of young people’s preferences. Value structure of its consciousness has its own specific character, depending on the age peculiarities. The dynamics of the transition from one age to another is accompanied with the reappraisal of values, eventually, influencing the life strategy of the future generation

  14. Off-resonant vibrational excitation: Orientational dependence and spatial control of photofragments

    DEFF Research Database (Denmark)

    Machholm, Mette; Henriksen, Niels Engholm

    2000-01-01

    Off-resonant and resonant vibrational excitation with short intense infrared (IR) laser pulses creates localized oscillating wave packets, but differs by the efficiency of the excitation and surprisingly by the orientational dependence. Orientational selectivity of the vibrational excitation...... of randomly oriented heteronuclear diatomic molecules can be obtained under simultaneous irradiation by a resonant and an off-resonant intense IR laser pulse: Molecules with one initial orientation will be vibrationally excited, while those with the opposite orientation will be at rest. The orientation-dependent...... distribution. (C) 2000 American Institute of Physics....

  15. Object-oriented communications

    International Nuclear Information System (INIS)

    Chapman, L.J.

    1989-01-01

    OOC is a high-level communications protocol based on the object-oriented paradigm. OOC's syntax, semantics, and pragmatics balance simplicity and expressivity for controls environments. While natural languages are too complex, computer protocols are often insufficiently expressive. An object-oriented communications philosophy provides a base for building the necessary high-level communications primitives like I don't understand and the current value of X is K. OOC is sufficiently flexible to express data acquisition, control requests, alarm messages, and error messages in a straightforward generic way. It can be used in networks, for inter-task communication, and even for intra-task communication

  16. Random magnetism

    International Nuclear Information System (INIS)

    Tahir-Kheli, R.A.

    1975-01-01

    A few simple problems relating to random magnetic systems are presented. Translational symmetry, only on the macroscopic scale, is assumed for these systems. A random set of parameters, on the microscopic scale, for the various regions of these systems is also assumed. A probability distribution for randomness is obeyed. Knowledge of the form of these probability distributions, is assumed in all cases [pt

  17. QUANTIFYING WILDLIFE ORIENTATION

    African Journals Online (AJOL)

    environment (P);. Attitudes expressed towards the natural environment (A);. Activity, or the involvement of a person in conservation actions in the broader sense {I). Different combinations of these functions give rise to four typologies of orientation. (Newgard et al., 1986) in the following way: TYPOLOGY. CHARACTERISTICS.

  18. Orientals and Orientalists

    DEFF Research Database (Denmark)

    Reade, Julian

    2004-01-01

    Reviews three books on archaeology. "Possessors and Possessed: Museums, Archaeology, and the Visualization of History in the Late Ottoman Empire," by Wendy M. K. Shaw; "Orientalism and Visual Culture: Imagining Mesapotamia in Nineteenth-Century Europe," by Frederick N. Bohrer; "Empires of the Pla......: Henry Rawlinson and the Lost Languages of Babylon," by Lesley Adkins....

  19. Management oriented process

    International Nuclear Information System (INIS)

    2004-01-01

    ANAV decided to implement process-oriented management by adopting the U. S. NEI (Nuclear Electric Industry) model. The article describes the initial phases of the project, its current status and future prospects. The project has been considered as an improvement in the areas of organization and human factors. Recently, IAEA standard drafts are including processes as an accepted management model. (Author)

  20. Aspect-Oriented Programming

    NARCIS (Netherlands)

    Lopes, C.; Bergmans, Lodewijk; Lopes, C.

    1999-01-01

    Aspect-oriented programming is a promising idea that can improve the quality of software by reduce the problem of code tangling and improving the separation of concerns. At ECOOP’97, the first AOP workshop brought together a number of researchers interested in aspectorientation. At ECOOP’98, during

  1. Managing Entrepreneurial Orientation

    NARCIS (Netherlands)

    S. van Doorn (Sebastiaan)

    2012-01-01

    textabstractIn this dissertation, we evaluate the roles senior management teams and individual middle managers play in realizing the performance benefits of entrepreneurial orientations. We investigate the role of senior management teams by focusing on a sample of 9.000 firms in the Netherlands. The

  2. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  3. Effects of orientation on Rey complex figure performance.

    Science.gov (United States)

    Ferraro, F Richard; Grossman, Jennifer; Bren, Amy; Hoverson, Allysa

    2002-10-01

    An experiment was performed that examined the impact of stimulus orientation on performance on the Rey complex figure. A total of 48 undergraduates (24 men, 24 women) were randomly assigned to one of four Rey figure orientation groups (0 degrees, 90 degrees, 180 degrees, and 270 degrees ). Participants followed standard procedures for the Rey figure, initially copying it in whatever orientation group they were assigned to. Next, all participants performed a 15-20 min lexical decision experiment, used as a filler task. Finally, and unbeknownest to them, participants were asked to recall as much of the figure as they could. As expected, results revealed a main effect of Task (F = 83.92, p orientation was not significant, nor did orientation interact with task (Fs .57). The results are important from an applied setting, especially if testing conditions are less than optimal and a fixed stimulus position is not possible (e.g., testing at the bedside).

  4. Randomized random walk on a random walk

    International Nuclear Information System (INIS)

    Lee, P.A.

    1983-06-01

    This paper discusses generalizations of the model introduced by Kehr and Kunter of the random walk of a particle on a one-dimensional chain which in turn has been constructed by a random walk procedure. The superimposed random walk is randomised in time according to the occurrences of a stochastic point process. The probability of finding the particle in a particular position at a certain instant is obtained explicitly in the transform domain. It is found that the asymptotic behaviour for large time of the mean-square displacement of the particle depends critically on the assumed structure of the basic random walk, giving a diffusion-like term for an asymmetric walk or a square root law if the walk is symmetric. Many results are obtained in closed form for the Poisson process case, and these agree with those given previously by Kehr and Kunter. (author)

  5. Three-dimensional image reconstruction. I. Determination of pattern orientation

    International Nuclear Information System (INIS)

    Blankenbecler, Richard

    2004-01-01

    The problem of determining the Euler angles of a randomly oriented three-dimensional (3D) object from its 2D Fraunhofer diffraction patterns is discussed. This problem arises in the reconstruction of a positive semidefinite 3D object using oversampling techniques. In such a problem, the data consist of a measured set of magnitudes from 2D tomographic images of the object at several unknown orientations. After the orientation angles are determined, the object itself can then be reconstructed by a variety of methods using oversampling, the magnitude data from the 2D images, physical constraints on the image, and then iteration to determine the phases

  6. Value oriented strategic marketing

    Directory of Open Access Journals (Sweden)

    Milisavljević Momčilo

    2013-01-01

    Full Text Available Changes in today's business environment require companies to orient to strategic marketing. The company accepting strategic marketing has a proactive approach and focus on continuous review and reappraisal of existing and seeking new strategic business areas. Difficulties in achieving target profit and growth require turning marketing from the dominant viewpoint of the tangible product to creating superior value and developing relationships with customers. Value orientation implies gaining competitive advantage through continuous research and understanding of what value represents to the consumers and discovering new ways to meet their required values. Strategic marketing investment requires that the investment in the creation of values should be regularly reviewed in order to ensure a focus on customers with high profit potential and environmental value. This increases customer satisfaction and retention and long-term return on investment of companies.

  7. Flight calls and orientation

    DEFF Research Database (Denmark)

    Larsen, Ole Næsbye; Andersen, Bent Bach; Kropp, Wibke

    2008-01-01

    flight calls was simulated by sequential computer controlled activation of five loudspeakers placed in a linear array perpendicular to the bird's migration course. The bird responded to this stimulation by changing its migratory course in the direction of that of the ‘flying conspecifics' but after about......  In a pilot experiment a European Robin, Erithacus rubecula, expressing migratory restlessness with a stable orientation, was video filmed in the dark with an infrared camera and its directional migratory activity was recorded. The flight overhead of migrating conspecifics uttering nocturnal...... 30 minutes it drifted back to its original migration course. The results suggest that songbirds migrating alone at night can use the flight calls from conspecifics as additional cues for orientation and that they may compare this information with other cues to decide what course to keep....

  8. Cerro Largo South orientation

    International Nuclear Information System (INIS)

    Pradier, B.

    1982-01-01

    This work is about Cerro Largo South orientation. The site is located in the northeast of Uruguay in the south of Melo city, Department of Cerro Largo. The study was carried out in the young edge socket in the East side of a small valley. This metamorphic socket constituted by gneisses and crystalline limestone are in contact with upper carboniferous formations and basal deposits composed by sandstones and conglomerates

  9. Editorial: International Entrepreneurial Orientation

    OpenAIRE

    Krzysztof Wach

    2015-01-01

    In recent decades, both the theory of internationalisation of the firm and/or the theory of international business have developed. Recent developments in international business studies prove that entrepreneurial orientation (EO) emerges as one of the important potential factors contributing to the intensification of the processes of internationalisation of the firm (Etemad, 2015; Gupta & Gupta, 2015). It seems that international entrepreneurship (IE) has been flourishing. The general theory o...

  10. Club d'orientation

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Courses d’orientation ce printemps Le Club d’orientation du CERN vous invite à venir découvrir la course d’orientation et vous propose, en partenariat avec d’autres clubs de la région, une dizaine de courses populaires. Celles-ci ont lieu les samedis après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Si vous êtes débutant vous pouvez profiter d’une petite initiation offerte par l’organisateur avant de vous lancer sur un parcours. Divers types de parcours sont à votre choix lors de chaque épreuve: facile court (2-3 km), facile moyen (3-5 km), technique court (3-4 km), technique moyen (4-5 km) et technique long (5-7 km). Les dates à retenir sont les suivantes pour la coupe genevoise de printemps: Samedi 22 mars: Apples (...

  11. Evaluation of trauma service orientation.

    Science.gov (United States)

    Schott, Eric

    2010-02-01

    Orientation of residents to clinical services may be criticized as cumbersome, dull, and simplytoo much information. With the mandated resident-hour restrictions, the question arose: Do residents perceive the orientation to our trauma service as worthwhile? Residents attend a standardized orientation lecture on the first day of the rotation. Three weeks later, an eight-item, five-point Likert-scale survey is distributed to assess the residents' perceptions of the value of the orientation. Responses to each item were examined. Fifty-four (92%) of the residents completed the questionnaire between September 2005 and August 2006. Most indicated that orientation was helpful (85%), the Trauma Resuscitation DVD was informative (82%), the review of procedures was helpful (82%), and the instructor's knowledge was adequate (94%). Most (92%) disagreed with the statement that orientation should not be offered. Careful attention to orientation content and format is important to the perception that the orientation is worthwhile.

  12. The effects of market orientation

    OpenAIRE

    Sandvik, Kåre

    1998-01-01

    This research is designed to accomplish three goals. The first goal is to revisit the market orientation construct in order to define the different facets of it. A review of the market orientation literature is made to assess and synthesize the stock of accumulated knowledge regarding the market orientation construct. The second goal of the research is to develop a theory of the effects ofmarket orientation. Using the literature concerning resource-based theory and organization...

  13. Moral Orientation, Gender, and Salary.

    Science.gov (United States)

    Manning, Roger W.

    A study examined the relationship among gender, moral orientation, and pay. Although the participants were about equal in terms of gender, 48 males and 53 females, males tended to hold higher degrees. The researcher hypothesized that salaries would be differentiated based on gender and moral orientation. Assumptions were that care-oriented males…

  14. Community Orientation and Media Use.

    Science.gov (United States)

    Neuwirth, Kurt; And Others

    1989-01-01

    Examines the relationship among media use, participation in local shopping and leisure activities, and orientation toward the local community. Reexamines Robert Merton's Cosmopolitan scale, finding it to have both localite (exclusively local orientation) and cosmopolite (orientation to events outside the local community) dimensions. (MM)

  15. Strategies for processing diffraction data from randomly oriented particles

    International Nuclear Information System (INIS)

    Elser, Veit

    2011-01-01

    The high intensity of free-electron X-ray light sources may enable structure determinations of viruses or even individual proteins without the encumbrance of first forming crystals. This note compares two schemes of non-crystalline diffraction data collection that have been proposed: serial single-shot data from individual particles, and averaged cross-correlation data from particle ensembles. The information content of these schemes is easily compared and we show that the single-shot approach, although experimentally more challenging, is always superior in this respect. In fact, for 3D structure determination a constraint counting argument shows that the cross-correlation scheme suffers from data deficiency. -- Research Highlights: →We compare two data collection schemes for imaging single particles with x-rays. →Cross-correlation data suffers an information deficit relative to single-shot data. →We recognize John Spence for his many contributions to single particle imaging.

  16. Understanding voter orientation in the context of political market orientation

    DEFF Research Database (Denmark)

    Ormrod, Robert P.; Henneberg, Stephan C.

    2010-01-01

    This article develops a conceptual framework and measurement model of political market orientation. The relationships between different behavioural aspects of political market orientation and the attitudinal influences of such behaviour are analysed, and the study includes structural equation...... modelling to test several hypotheses. While the results show that political parties focus on several different aspects of market-oriented behaviour, especially using an internal and societal orientation as cultural antecedents, a more surprising result is the inconclusive effect of a voter orientation...... on political market orientation. This lends support to the argument of 'looking beyond the customer' in political marketing research and practice. The article discusses the findings in the context of the existing literature on political marketing and commercial market orientation....

  17. Fibril orientation redistribution induced by stretching of cellulose nanofibril hydrogels

    International Nuclear Information System (INIS)

    Josefsson, Gabriella; Gamstedt, E. Kristofer; Ahvenainen, Patrik; Mushi, Ngesa Ezekiel

    2015-01-01

    The mechanical performance of materials reinforced by cellulose nanofibrils is highly affected by the orientation of these fibrils. This paper investigates the nanofibril orientation distribution of films of partly oriented cellulose nanofibrils. Stripes of hydrogel films were subjected to different amount of strain and, after drying, examined with X-ray diffraction to obtain the orientation of the nanofibrils in the films, caused by the stretching. The cellulose nanofibrils had initially a random in-plane orientation in the hydrogel films and the strain was applied to the films before the nanofibrils bond tightly together, which occurs during drying. The stretching resulted in a reorientation of the nanofibrils in the films, with monotonically increasing orientation towards the load direction with increasing strain. Estimation of nanofibril reorientation by X-ray diffraction enables quantitative comparison of the stretch-induced orientation ability of different cellulose nanofibril systems. The reorientation of nanofibrils as a consequence of an applied strain is also predicted by a geometrical model of deformation of nanofibril hydrogels. Conversely, in high-strain cold-drawing of wet cellulose nanofibril materials, the enhanced orientation is promoted by slipping of the effectively stiff fibrils

  18. Random Fields

    Science.gov (United States)

    Vanmarcke, Erik

    1983-03-01

    Random variation over space and time is one of the few attributes that might safely be predicted as characterizing almost any given complex system. Random fields or "distributed disorder systems" confront astronomers, physicists, geologists, meteorologists, biologists, and other natural scientists. They appear in the artifacts developed by electrical, mechanical, civil, and other engineers. They even underlie the processes of social and economic change. The purpose of this book is to bring together existing and new methodologies of random field theory and indicate how they can be applied to these diverse areas where a "deterministic treatment is inefficient and conventional statistics insufficient." Many new results and methods are included. After outlining the extent and characteristics of the random field approach, the book reviews the classical theory of multidimensional random processes and introduces basic probability concepts and methods in the random field context. It next gives a concise amount of the second-order analysis of homogeneous random fields, in both the space-time domain and the wave number-frequency domain. This is followed by a chapter on spectral moments and related measures of disorder and on level excursions and extremes of Gaussian and related random fields. After developing a new framework of analysis based on local averages of one-, two-, and n-dimensional processes, the book concludes with a chapter discussing ramifications in the important areas of estimation, prediction, and control. The mathematical prerequisite has been held to basic college-level calculus.

  19. Sacral orientation and spondylolysis.

    Science.gov (United States)

    Peleg, Smadar; Dar, Gali; Steinberg, Nili; Masharawi, Youssef; Been, Ella; Abbas, Janan; Hershkovitz, Israel

    2009-12-01

    A descriptive study (based on skeletal material) was designed to measure sacral anatomic orientation (SAO) in individuals with and without spondylolysis. To test whether a relationship between SAO and spondylolysis exists. Spondylolysis is a stress fracture in the pars interarticularis (mainly of L5). The natural history of the phenomenon has been debated for years with opinions divided, i.e., is it a developmental condition or a stress fracture phenomenon. There is some evidence to suggest that sacral orientation can be a "key player" in revealing the etiology of spondylolysis. The pelvis was anatomically reconstructed and SAO was measured as the angle created between the intersection of a line running parallel to the superior surface of the sacrum and a line running between the anterior superior iliac spine (ASIS) and the anterior-superior edge of the symphysis pubis (PUBIS).SAO was measured in 99 adult males with spondylolysis and 125 adult males without spondylolysis. The difference between the groups was tested using an unpaired t test. Spondylolysis prevalence is significantly higher in African-Americans compared to European-Americans: 5.4% versus 2.04% in males (P < 0.001) and 2.31% versus 0.4%, P < 0.001 in females. SAO was significantly lower in the spondylolytic group (44.07 degrees +/- 11.46 degrees) compared to the control group (51.07 degrees +/- 8.46 degrees, P < 0.001). A more horizontally oriented sacrum leads to direct impingement on L5 pars interarticularis by both L4 inferior articular facet superiorly and S1 superior articular facet inferiorly. Repetitive stress due to standing (daily activities) or sitting increases the "pincer effect" on this area, and eventually may lead to incomplete synostosis of the neural arch.

  20. Emotion-oriented systems

    CERN Document Server

    Pelachaud, Catherine

    2013-01-01

    The Affective Computing domain, term coined by Rosalind Picard in 1997, gathers several scientific areas such as computer science, cognitive science, psychology, design and art. The humane-machine interaction systems are no longer solely fast and efficient. They aim to offer to users affective experiences: user's affective state is detected and considered within the interaction; the system displays affective state; it can reason about their implication to achieve a task or resolve a problem. In this book, we have chosen to cover various domains of research in emotion-oriented systems. Our aim

  1. Mina Oriental report

    International Nuclear Information System (INIS)

    Cicalese, H.; Mari, C.; Lema, F.; Valverde, C.; Haut, R.

    1986-01-01

    This report refers to the obtained results of those geophysical works practiced during the year 1985 in Mina Oriental region, located in the department of Maldonado. The same ones had like object to supplement geophysical studies previous carried out in the area and to investigate a possible connection mineralized in the geologic context with Mina La Esperanza that , where they arose anomalous indications in geochemical prospecting. They were applied the following methods: Induced Polarization, Magnetometry and Electromagnetism. The conclusions and recommendations arrived express one discontinuity among the referred areas, even subtracting some explanations on the detected lateral anomalies.

  2. Club d'orientation

    CERN Document Server

    Le Club d’Orientation du CERN

    2011-01-01

      Course d’orientation : Coupe Genevoise de printemps 2011 Nouvelle saison – nouveau programme Le Club d’Orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une dizaine de courses pour la coupe de printemps. Elles se dérouleront des deux cotés de la frontière franco-suisse, à savoir : Samedi 19 mars: Vidy/Dorigny (Vd) - Score Samedi 26 mars: Attalens (Vd) Samedi 2 avril: Vulbens (74) Samedi 9 avril: Challex (74) Samedi 16 avril: Vernand-Dessus (Vd) Samedi 7 mai: Trelex (Vd) Samedi 14 mai: Chancy/Valleiry (Ge/74) Samedi 21 mai: Prémanon (39) Samedi 28 mai : Semnoz (74) Samedi 18 juin: La Faucille (01) – Finale Ces courses populaires ont lieu le samedi après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé...

  3. Milestones Universidad de Oriente

    Directory of Open Access Journals (Sweden)

    Julio A. Villalón-Infante

    2016-09-01

    Full Text Available On October 10, 1947, the University of Oriente is founded with the presence of local authorities and the historic Bell of the Damajagua. Since then it has generated outstanding events that have drawn guidelines in its history. These landmarks have taken place in different spheres of social, political and economic life. We have found that most workers and students from the University know less than fifty percent of such events, and we assume that the population outside the walls must have a greater ignorance. The present paper aims to spread these crucial events because knowing them will help appreciate better the real prestige of this house of higher learning through its rich  history, which will result in feelings of admiration and respect for this university. Thus, it is necessary to make a wider propagation through the press, radio and television programs and digital media such as Multimedia, Web Pages and the Internet.The theme landmark at the Universidad de Oriente of the subject Historical and Contemporary Debates implemented in the disciplines of all careers at this university gives freshmen the opportunity to investigate and learn about these remarkable  facts with some impact outside our national territory.

  4. Club d'orientation

    CERN Multimedia

    Le Club d’Orientation du CERN

    2011-01-01

    La première course d’orientation comptant pour la Coupe Genevoise de printemps a eu lieu près de Cossonay samedi 19 mars ; une bonne soixantaine de coureurs avaient fait le déplacement. Les vainqueurs sont : technique long, Domenico Lepori (Care Vevey) s’imposant d’une minute devant Yannick Gagneret (O’Jura) ; technique moyen, Jean-Rodolphe Knuchel (CO Lausanne-Jorat) devant Cédric Wehrle (CO CERN) ; technique court, Marie Droz (ANCO) ; facile moyen, Elia Martarelli devant Konstantinos Haider (CO CERN); facile court, Sarah Stuber (CO Lausanne-Jorat). Prochain rendez-vous à noter : samedi 26 mars dans la forêt d’Attalens (Canton de Vaud), parking au terrain de foot. Les inscriptions et départs de la course populaire se feront entre 13h et 15h. Pour ceux qui ne connaissent pas l’orientation, c’est l&am...

  5. Course d'Orientation

    CERN Multimedia

    Course d'Orientation

    2012-01-01

      Coupe de printemps La deuxième étape de la coupe de printemps organisée par le club d’orientation du CERN s’est déroulée le samedi 21 avril dans la forêt de Pougny-Challex. étant donné le temps très humide qui domine depuis début avril, les coureurs ne pouvaient trouver qu’un terrain gras et trempé, mais cela fait partie des défis de la course d’orientation. Le parcours technique long a été remporté par Yvan Balliot, CO Annecy en 51:18 devant Jean-Charles Baritaux en 56:21 et Bruno Barge, CO CERN en 59:39. La prochaine CO populaire se courra à Vulbens le samedi 28 avril. Les inscriptions et les départs se feront entre 13h et 15h. A noter les courses en mai : • Samedi 5 mai : Trelex • Samedi 12 mai : Chancy / Valleiry • Samedi 19 mai : Lausan...

  6. Fuel cycle oriented approach

    International Nuclear Information System (INIS)

    Petit, A.

    1987-01-01

    The term fuel cycle oriented approach is currently used to designate two quite different things: the attempt to consider all or part of a national fuel cycle as one material balance area (MBA) or to consider individual MBAs existing in a state while designing a unique safeguards approach for each and applying the principle of nondiscrimination to fuel cycles as a whole, rather than to individual facilities. The merits of such an approach are acceptability by the industry and comparison with the contemplated establishment of long-term criteria. The following points concern the acceptability by the industry: (1) The main interest of the industry is to keep an open international market and therefore, to have effective and efficient safeguards. (2) The main concerns of the industry regarding international safeguards are economic burden, intrusiveness, and discrimination. Answers to these legitimate concerns, which retain the benefits of a fuel cycle oriented approach, are needed. More specifically, the problem of reimbursing the operator the costs that he has incurred for the safeguards must be considered

  7. Investigations of the microstructural stability of wrought Ni-(Fe)-based syperalloys for steam turbine rotor application beyond 700 C; Untersuchungen der Strukturstabilitaet von Ni-(Fe)-Basislegierungen fuer Rotorwellen in Dampfturbinen mit Arbeitstemperaturen ueber 700 C

    Energy Technology Data Exchange (ETDEWEB)

    Seliga, T.

    2005-07-01

    There is a continuous trend to improve the efficiency of modern power plants with steam turbine require operating steam temperature from 700 to 720 C. For substantial parts like turbine rotors and discs this means increased requirements on the high temperature resistance, which can not longer be fulfilled by the presently used steel. As new materials for the components, which are thermo-mechanically loaded, only Ni-based superalloys are suitable for their fabrication, structure stability and thermo-mechanical characteristics. With view on creep and creep crack growth resistance as suitable candidates in the context a DFG research project wrought Ni-based superalloy Waspaloy and Ni-Fe-based alloy Inconel 706 were selected, which exhibited different hardening mechanisms. Waspaloy is a {gamma}'-hardened material with small portion of carbides on the grain boundaries. Inconel 706 is a particle hardened alloy with a very complex microstructure, it consists of {gamma}', {gamma}{sup ''}-particle, {eta}-phase und carbides. Concerning to their castability, forgeability, creep and creep crack growth and microstructural stability these candidate materials have been investigated and modelled. The knowledge about their long time stability of the microstructure, castability, forgeability and mechanical properties leads to the two new modification (Waspaloy{yields}DT750 and Inconel 706{yields}DT706). The modification of the Waspaloy to DT 750 served better castability (elimination of the Freckle formation). An improvement of the long-term stability of the microstructure was not necessary, by a changed heat treatment was reached a homogeneous, monomodale {gamma}'-particle distribution. The modification of Inconel 706 to DT 706 served to stabilize the {gamma}'-phase and to reduce of the {gamma}{sup ''} phase without suppressing the cellular {eta}-phase colonies on the grain boundaries. This work presents the test results for the structural

  8. Numerical study of microphase separation in gels and random media

    International Nuclear Information System (INIS)

    Uchida, Nariya

    2004-01-01

    Microphase separation in gels and random media is numerically studied using a Ginzburg-Landau model. A random field destroys long-range orientational (lamellar) order and gives rise to a disordered bicontinuous morphology. The dependence of the correlation length on the field strength is distinct from that of random-field magnets

  9. Task-Oriented Gaming for Transfer to Prosthesis Use

    NARCIS (Netherlands)

    van Dijk, Ludger; Sluis, van der Corry K.; van Dijk, Hylke W.; Bongers, Raoul M.

    2016-01-01

    The aim of this study is to establish the effect of task-oriented video gaming on using a myoelectric prosthesis in a basic activity of daily life (ADL). Forty-one able-bodied right-handed participants were randomly assigned to one of four groups. In three of these groups the participants trained to

  10. Fit between Future Thinking and Future Orientation on Creative Imagination

    Science.gov (United States)

    Chiu, Fa-Chung

    2012-01-01

    The purpose of the current study is to investigate the impact of future thinking, and the fit between future thinking and future orientation on creative thinking. In Study 1, 83 undergraduates were randomly assigned to three groups: 50-year future thinking, 5-year future thinking, and the present-day thinking. First, the priming tasks, in which…

  11. Art of Wrought Copper in Turkey

    Directory of Open Access Journals (Sweden)

    Nuran KAYABAŞI

    2014-07-01

    Full Text Available Among the handicraft, art of being a coppersmith has been occurred intensively in the past. The fast developing socio - economic structure diminished the value and the place of the copper vessels. Heavy and beautiful vessels made by beating left their places to thin, light aluminum, pl astic, glass and steel vessels made by machinery. The demand for copper is diminished. Therefore being a coppersmith has become less and less important every day. However, in the last few years, copper vessels becoming a touristic souvenir became a source of hope for the traditional coppersmith art to live on. Copperworking is applied in our country in some regions and there are people who live off it. Souvenirs, daily used vessels, and requirements of the rural areas are produced in centers such as İstanb ul, Ankara, Tokat, Çorum, Erzincan, Diyarbakır, Kahramanmaraş, Gaziantep, Bursa, Kastamonu, Çankırı, Giresun and Trabzon. The situation of being a coppersmith in Turkey is explained, examples are given from souvenir copper items produced in Ankara, and sug gestions are made to keep this craft alive.

  12. Applications of the rotating orientation XRD method to oriented materials

    International Nuclear Information System (INIS)

    Guo Zhenqi; Li Fei; Jin Li; Bai Yu

    2009-01-01

    The rotating orientation x-ray diffraction (RO-XRD) method, based on conventional XRD instruments by a modification of the sample stage, was introduced to investigate the orientation-related issues of such materials. In this paper, we show its applications including the determination of single crystal orientation, assistance in crystal cutting and evaluation of crystal quality. The interpretation of scanning patterns by RO-XRD on polycrystals with large grains, bulk material with several grains and oriented thin film is also presented. These results will hopefully expand the applications of the RO-XRD method and also benefit the conventional XRD techniques. (fast track communication)

  13. Engineering of oriented carbon nanotubes in composite materials

    Science.gov (United States)

    Beigmoradi, Razieh; Mohebbi-Kalhori, Davod

    2018-01-01

    The orientation and arrangement engineering of carbon nanotubes (CNTs) in composite structures is considered a challenging issue. In this regard, two groups of in situ and ex situ techniques have been developed. In the first, the arrangement is achieved during CNT growth, while in the latter, the CNTs are initially grown in random orientation and the arrangement is then achieved during the device integration process. As the ex situ techniques are free from growth restrictions and more flexible in terms of controlling the alignment and sorting of the CNTs, they are considered by some as the preferred technique for engineering of oriented CNTs. This review focuses on recent progress in the improvement of the orientation and alignment of CNTs in composite materials. Moreover, the advantages and disadvantages of the processes are discussed as well as their future outlook. PMID:29515955

  14. MRI of oriental cholangiohepatitis

    Energy Technology Data Exchange (ETDEWEB)

    Wani, N.A., E-mail: ahmad77chinar@gmail.co [Department of Radiodiagnosis and Imaging, Sher-I-Kashmir Institute of Medical Sciences (SKIMS), Srinagar (India); Robbani, I.; Kosar, T. [Department of Radiodiagnosis and Imaging, Sher-I-Kashmir Institute of Medical Sciences (SKIMS), Srinagar (India)

    2011-02-15

    Oriental cholangiohepatitis (OCH) also called recurrent pyogenic cholangitis is characterized by intrahepatic duct calculi, strictures, and recurrent infections. In turn cholangitis can result in multiple hepatic abscesses, further biliary strictures, and in severe cases, progressive hepatic parenchymal destruction, cirrhosis, and portal hypertension. Magnetic resonance cholangiopancreatography (MRCP) and conventional T1-weighted (T1 W) and T2-weighted (T2 W) magnetic resonance imaging (MRI) findings have been described in patients with OCH. MRCP findings include duct dilation, strictures, and calculi. MRCP can help to localize the diseased ducts and determine the severity of involvement. T1 and T2 W sequences reveal the parenchymal changes of atrophy, abscess formation, and portal hypertension in addition to calculi. Post-treatment changes are also well depicted using MRI. Comprehensive, non-invasive assessment is achieved by using conventional MRI and MRCP in OCH providing a roadmap for endoscopic or surgical management.

  15. El oriente de Chillida

    Directory of Open Access Journals (Sweden)

    Paloma Galante Rodero

    2011-01-01

    Full Text Available Todo el arte es influyente porque todo arte nace del hombre. Esta pequeña reflexión quiere resaltar cómo el arte y el pensamiento oriental han sido más influyentes, no sólo en el ámbito estético, sino en la concepción espacial y del propio hecho creador, en el arte occidental de lo que a primera vista podemos apreciar. En el caso de Chillida es una influencia no intencionada, muy sutil y analizada desde dos perspectivas, la primera, a partir de sus contactos directos con Japón como Homenaje a Hokusai, exposiciones realizadas y premios concedidos en el país nipón y por otro lado, los contactos indirectos con Oriente como su biblioteca personal, sus colaboraciones editoriales con Heidegger y Valente y su encuentro con Mark Tobey en la Bienal de Venecia de 1958.All art is influential because all art is born of man. This short reflection wants to highlight how eastern art and Eastern thought have been most influential, not only in the aesthetic realm, in spatial conception and creative act, in Western art more than at first glance we can see. In the case of Chillida’s unintentional influence, very subtle and analyzed from two perspectives, first from direct contacts with Japan as Tribute to Hokusai, exhibitions and prizes awarded in the japanese country, and on the other hand, indirect contacts with the East as his personal library, his collaborations with Heidegger and Valente and his encounter with Mark Tobey at the Venice Biennale of 1958.

  16. Impact Orientation in Austria

    Directory of Open Access Journals (Sweden)

    Benedikt SPEER

    2015-12-01

    Full Text Available The implementation of impact orientation within the public sector constitutes an en-tirely new approach of governance. Until recently – and in many cases still so – public administration was primarily input-oriented, which means focusing on the resources (financial, personnel etc. needed to fulfil existing public tasks instead of focusing on the results and final effects which are intended to be reached ultimately by these often long ago defined assignments. As experience shows, the pressing challenge of increasing steadily the effectiveness and efficiency within public administration cannot be reached by such a one-sided and consequently limited approach. Thus, a wider and more comprehensive concept is necessary to optimize the public sector in all its dimensions. As a result of prevalent budget crises, increasing pressure of stakeholders towards public administration and generally less room for manoeuver due to a growing regulatory burden, new/adapted and more flexible ways of thinking and acting within the public sector are required. Hence, modern concepts of steering and control – not only in Europe but in a larger number of OECD countries – now tend to give more importance to the targets and effects of public administration and its activities within the societal context. This rather new concept – the so called “impact orientation” which has been introduced in Austria as core element of the Federal Budget Law Reform 2009/2013 – requires a fundamental alignment of governmental actions and a new focus on the outputs and even on the outcomes of political and administrative strategies. The results until now have been primarily “outwardly-oriented” reform concepts concentrating on the external societal effects of politico-administrative actions. However, recent research results show for Austria, that this external dimension has to be linked more closely with internal reform efforts and internal impact targets in order to

  17. Effect of whey protein hydrolysate on performance and recovery of top-class orienteering runners

    DEFF Research Database (Denmark)

    Hansen, Mette; Bangsbo, Jens; Jensen, Jørgen

    2015-01-01

    This trial aimed to examine the effect of whey protein hydrolysate intake before and after exercise sessions on endurance performance and recovery in elite orienteers during a training camp. Eighteen elite orienteers participated in a randomized controlled intervention trial during a 1-week...... a strenuous 1-week training camp. The results indicate that protein supplementation in conjunction with each exercise session facilitates the recovery from strenuous training in elite orienteers....

  18. Influence of fibre orientation on the performance of steel fibre-reinforced concrete

    OpenAIRE

    Grünewald, Steffen; Laranjeira de Oliveira, Filipe; Walraven, Joost; Aguado de Cea, Antonio; Molins i Borrell, Climent

    2012-01-01

    The performance of fibre-reinforced materials in the hardened state depends on the material behaviour, the production method and influences related to the structure. The position and the orientation of fibres in a structure can differ from the homogenous distribution and the random orientation in a mixer. Due to the flow of the concrete, fibres are able to orient which makes the prediction of the structural behaviour of fibre-reinforced concrete more complex, but it also offers the potential ...

  19. Oriented Poly(dialkylstannane)s

    DEFF Research Database (Denmark)

    Choffat, Fabien; Fornera, Sara; Smith, Paul

    2008-01-01

    The inorganic (or 'organometallic') polymers poly(dibutylstannane), poly(dioctylstannane), and poly(didodecylstannane) have been oriented by shear forces, the tensile drawing of blends with polyethylene, and deposition from solution onto glass slides coated with all oriented, friction-deposited p......The inorganic (or 'organometallic') polymers poly(dibutylstannane), poly(dioctylstannane), and poly(didodecylstannane) have been oriented by shear forces, the tensile drawing of blends with polyethylene, and deposition from solution onto glass slides coated with all oriented, friction......-deposited poly(tetrafluoroethylene) (PTFE) layer. Orientation of the polystannanes has been examined by polarization microscopy, UV-vis spectroscopy with polarized light, and X-ray diffraction and their direction is found to depend on the length of the alkyl side groups and the method of orientation. Remarkably...

  20. Feature-based attentional modulation of orientation perception in somatosensation

    Directory of Open Access Journals (Sweden)

    Meike Annika Schweisfurth

    2014-07-01

    Full Text Available In a reaction time study of human tactile orientation detection the effects of spatial attention and feature-based attention were investigated. Subjects had to give speeded responses to target orientations (parallel and orthogonal to the finger axis in a random stream of oblique tactile distractor orientations presented to their index and ring fingers. Before each block of trials, subjects received a tactile cue at one finger. By manipulating the validity of this cue with respect to its location and orientation (feature, we provided an incentive to subjects to attend spatially to the cued location and only there to the cued orientation. Subjects showed quicker responses to parallel compared to orthogonal targets, pointing to an orientation anisotropy in sensory processing. Also, faster reaction times were observed in location-matched trials, i.e. when targets appeared on the cued finger, representing a perceptual benefit of spatial attention. Most importantly, reaction times were shorter to orientations matching the cue, both at the cued and at the uncued location, documenting a global enhancement of tactile sensation by feature-based attention. This is the first report of a perceptual benefit of feature-based attention outside the spatial focus of attention in somatosensory perception. The similarity to effects of feature-based attention in visual perception supports the notion of matching attentional mechanisms across sensory domains.

  1. Scattering phase functions of horizontally oriented hexagonal ice crystals

    International Nuclear Information System (INIS)

    Chen Guang; Yang Ping; Kattawar, George W.; Mishchenko, Michael I.

    2006-01-01

    Finite-difference time domain (FDTD) solutions are first compared with the corresponding T-matrix results for light scattering by circular cylinders with specific orientations. The FDTD method is then utilized to study the scattering properties of horizontally oriented hexagonal ice plates at two wavelengths, 0.55 and 12 μm. The phase functions of horizontally oriented ice plates deviate substantially from their counterparts obtained for randomly oriented particles. Furthermore, we compute the phase functions of horizontally oriented ice crystal columns by using the FDTD method along with two schemes for averaging over the particle orientations. It is shown that the phase functions of hexagonal ice columns with horizontal orientations are not sensitive to the rotation about the principal axes of the particles. Moreover, hexagonal ice crystals and circular cylindrical ice particles have similar optical properties, particularly, at a strongly absorbing wavelength, if the two particle geometries have the same length and aspect ratio defined as the ratio of the radius or semi-width of the cross section of a particle to its length. The phase functions for the two particle geometries are slightly different in the case of weakly absorbing plates with large aspect ratios. However, the solutions for circular cylinders agree well with their counterparts for hexagonal columns

  2. The theory of experience orientation

    DEFF Research Database (Denmark)

    Jensen, Jesper Legaard

    2012-01-01

    This paper describes the theory of experience orientation, which builds on the division of experiences in two categories: Goal-oriented and Omni-oriented. The theory comes from preliminary studies of userexperiences in a work-context, where I have found this distinction to be beneficial....... In this paper I explain the theory behind it and the practical application of such a distinction when designing for an experience....

  3. Task oriented training improves the balance outcome & reducing fall risk in diabetic population

    OpenAIRE

    Ghazal, Javeria; Malik, Arshad Nawaz; Amjad, Imran

    2016-01-01

    Objectives: The objective was to determine the balance impairments and to compare task oriented versus traditional balance training in fall reduction among diabetic patients. Methods: The randomized control trial with descriptive survey and 196 diabetic patients were recruited to assess balance impairments through purposive sampling technique. Eighteen patients were randomly allocated into two groups; task oriented balance training group TOB (n=8) and traditional balance training group TBT (n...

  4. Report of the Orientation Workshop

    DEFF Research Database (Denmark)

    Nunez, Heilyn Camacho; Buus, Lillian; Ogange, Betty

    2014-01-01

    This Orientation Workshops is part of MAAGART project. The workshop is divided in three parts: 1) pre-Orientation Workshop stage, 2) Face-to-Face stage and 3) post-Orientation stage. Pre and post stages will be developed online. All the activities will take place in a virtual learning environment...... created for this purpose. Participants will receive all the information about how to access the virtual learning environment (Moodle) prior to the pre-orientation workshop. In this report we cover only the two first stages. Jørgen Bang, as a part of the Community of Practice activity, will be facilitating...

  5. Orientation decoding: Sense in spirals?

    Science.gov (United States)

    Clifford, Colin W G; Mannion, Damien J

    2015-04-15

    The orientation of a visual stimulus can be successfully decoded from the multivariate pattern of fMRI activity in human visual cortex. Whether this capacity requires coarse-scale orientation biases is controversial. We and others have advocated the use of spiral stimuli to eliminate a potential coarse-scale bias-the radial bias toward local orientations that are collinear with the centre of gaze-and hence narrow down the potential coarse-scale biases that could contribute to orientation decoding. The usefulness of this strategy is challenged by the computational simulations of Carlson (2014), who reported the ability to successfully decode spirals of opposite sense (opening clockwise or counter-clockwise) from the pooled output of purportedly unbiased orientation filters. Here, we elaborate the mathematical relationship between spirals of opposite sense to confirm that they cannot be discriminated on the basis of the pooled output of unbiased or radially biased orientation filters. We then demonstrate that Carlson's (2014) reported decoding ability is consistent with the presence of inadvertent biases in the set of orientation filters; biases introduced by their digital implementation and unrelated to the brain's processing of orientation. These analyses demonstrate that spirals must be processed with an orientation bias other than the radial bias for successful decoding of spiral sense. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Subcortical orientation biases explain orientation selectivity of visual cortical cells.

    Science.gov (United States)

    Vidyasagar, Trichur R; Jayakumar, Jaikishan; Lloyd, Errol; Levichkina, Ekaterina V

    2015-04-01

    The primary visual cortex of carnivores and primates shows an orderly progression of domains of neurons that are selective to a particular orientation of visual stimuli such as bars and gratings. We recorded from single-thalamic afferent fibers that terminate in these domains to address the issue whether the orientation sensitivity of these fibers could form the basis of the remarkable orientation selectivity exhibited by most cortical cells. We first performed optical imaging of intrinsic signals to obtain a map of orientation domains on the dorsal aspect of the anaesthetized cat's area 17. After confirming using electrophysiological recordings the orientation preferences of single neurons within one or two domains in each animal, we pharmacologically silenced the cortex to leave only the afferent terminals active. The inactivation of cortical neurons was achieved by the superfusion of either kainic acid or muscimol. Responses of single geniculate afferents were then recorded by the use of high impedance electrodes. We found that the orientation preferences of the afferents matched closely with those of the cells in the orientation domains that they terminated in (Pearson's r = 0.633, n = 22, P = 0.002). This suggests a possible subcortical origin for cortical orientation selectivity. © 2015 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of the American Physiological Society and The Physiological Society.

  7. Random magnetism

    International Nuclear Information System (INIS)

    Tsallis, C.

    1980-03-01

    The 'ingredients' which control a phase transition in well defined system as well as in random ones (e.g. random magnetic systems) are listed and discussed within a somehow unifying perspective. Among these 'ingredients' we find the couplings and elements responsible for the cooperative phenomenon, the topological connectivity as well as possible topological incompatibilities, the influence of new degrees of freedom, the order parameter dimensionality, the ground state degeneracy and finally the 'quanticity' of the system. The general trends, though illustrated in magnetic systems, essentially hold for all phase transitions, and give a basis for connection of this area with Field theory, Theory of dynamical systems, etc. (Author) [pt

  8. Random magnetism

    International Nuclear Information System (INIS)

    Tsallis, C.

    1981-01-01

    The 'ingredients' which control a phase transition in well defined systems as well as in random ones (e.q. random magnetic systems) are listed and discussed within a somehow unifying perspective. Among these 'ingredients' the couplings and elements responsible for the cooperative phenomenon, the topological connectivity as well as possible topological incompatibilities, the influence of new degrees of freedom, the order parameter dimensionality, the ground state degeneracy and finally the 'quanticity' of the system are found. The general trends, though illustrated in magnetic systems, essentially hold for all phase transitions, and give a basis for connection of this area with Field theory, Theory of dynamical systems, etc. (Author) [pt

  9. COURSE D'ORIENTATION

    CERN Multimedia

    COURSE D'ORIENTATION

    2010-01-01

    Coupe d’automne Samedi 25 septembre, certains courageux ont osé affronter le temps pluvieux et frais et se sont rendus aux Pléiades pour participer à la quatrième étape de la coupe Genevoise d’automne. Le Club du CARE-Vevey avait préparé 5 jolis circuits : 3 techniques et 2 faciles. Félicitations à tous les concurrents et plus particulièrement aux vainqueurs de chaque parcours. Les résultats complets sont sur le site du club http://cern.ch/club-orientation. Technique long : 1. Samy Vaehaenen (CO CERN), 2. Clément Poncet (O’Jura), 3. Bernhard Wehrle (CO CERN). Technique moyen : 1. Sampo Vallotton (RTB), 2. Guillaume Ladine (RTB), 3. Anne Godel (CA Rosé). Technique court : 1. Miles Marston (Gimel), 2. Alison High (CARE Vevey), 3. Emese Szwuyog (CO CERN). Facile moyen : 1. Nicolas M&u...

  10. COURSE D'ORIENTATION

    CERN Multimedia

    CLUB D'ORIENTATION

    2010-01-01

      Finale de la coupe d’automne La coupe d’automne organisée par le club d’orientation du CERN s’est terminée ce samedi 23 octobre après 7 épreuves. Les deux dernières courses se sont déroulées en l’espace de 24 heures, puisque le club organisait une course type nocturne vendredi 22 octobre sur le site du CERN et la dernière étape avait lieu dans la forêt de Merdisel sous la forme d’une course aux points samedi 23 après-midi. Les participants avaient à cœur de bien terminer lors de ces deux épreuves pour consolider ou améliorer leur place au classement général. Le classement général de la coupe d’automne, basé sur les 4 meilleurs résultats de la saison, est ainsi le suivant : Circuit ...

  11. Club d’orientation

    CERN Multimedia

    Club d’orientation

    2010-01-01

    On s’approche vers la finale ! Samedi 29 juin, le club d’orientation de Lausanne-Jorat (Canton de Vaud) a accueilli le relais inter-club. Douze équipes de deux coureurs étaient venues s’affronter sur le parcours de type «facile», et vingt-six équipes de trois coureurs du côté «technique». Tous ces parcours étaient proposés sur une zone semi-urbaine où il fallait alterner entre habitations, rues, bois, parc et adapter sa vitesse de course. Le suspens était bien présent notamment sur le relais technique. La victoire est revenue à l’équipe de l’OLG Huttwil composée de Thomas Hofer, Janick Zappa et Philipp Zappa en un temps de 2:14:07. Juste derrière à 50 secondes on trouve l’équipe CO CERN T1 avec Emese&am...

  12. Course d'Orientation

    CERN Multimedia

    Course d'Orientation

    2012-01-01

      Tous à vos boussoles, cap sur une nouvelle saison! Le Club d’Orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose à nouveau une série de courses comptant pour la coupe genevoise. Le coup d’envoi sera donné samedi 17 mars au Flon dans le canton de Vaud  avec une course longue distance. Puis le programme sera le suivant: Samedi 21 avril : Challex Samedi 28 avril : Vulbens Samedi 5 mai : Trelex Samedi 12 mai : Chancy Samedi 19 mai : Lausanne/Sauvabelin Samedi 2 juin: La Faucille Samedi 9 juin: Bonmont/La Rippe Finale Ces courses populaires ont lieu le samedi après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Pour participer aux épreuves sur le territoire français, il faut être en possession soit ...

  13. COURSE D'ORIENTATION

    CERN Multimedia

    Course d'Orientation

    2010-01-01

    Du Mont Mussy à Lamoura C’est au Mont Mussy près de Divonne que s’est déroulée la deuxième course comptant pour la coupe d’automne. Une bonne centaine de participants n’ont pas hésité à venir découvrir, sous un magnifique soleil, les 5 parcours proposés par la famille Williams/Hatzifotiadou. La plupart des participants ont couru en individuel, certains ont choisi de chercher les balises en famille. C’est un effet une possibilité qu’offrent nos courses d’orientation du samedi, à savoir que l’on peut pratiquer individuellement, en famille ou entre amis. Les résultats sur les 5 parcours sont les suivants : Technique long : Yannick Gagneret en 1.08:09, suivi par F. Janod en 1.09:41 et de Bruno Barge en 1.11:23. Technique moyen : Victoire pour Rémi...

  14. Club d'orientation

    CERN Multimedia

    Club d'orientation du CERN

    2010-01-01

    COURSE D’ORIENTATION  1er mai: muguet et balises à Vulbens Les week-ends s’enchainent et les courses aussi. La quatrième manche de la coupe genevoise organisée par le club sous la direction de J. Zosso, J. Iven et W. Heinze a eu lieu sur le site de Genolier (canton de Vaud) samedi dernier. Le soleil a, une nouvelle fois, accompagné les participants sur les cinq circuits proposés. On notera la jolie performance de Sami Vaehaenen élite finlandais (CO CERN) sur le parcours technique long en 49:09 avec une avance de presque 10 mm sur le second concurrent, le junior Clément Poncet (O’Jura). Les résultats complets de cette étape sont consultables en ligne à l’adresse suivante : http://cern.ch/club-orientation. La prochaine étape est prévue dans la forêt de Vulbens (Haute Savoie) samedi 1er mai sur une toute nouvelle carte. Les...

  15. Editorial: International Entrepreneurial Orientation

    Directory of Open Access Journals (Sweden)

    Krzysztof Wach

    2015-06-01

    Full Text Available In recent decades, both the theory of internationalisation of the firm and/or the theory of international business have developed. Recent developments in international business studies prove that entrepreneurial orientation (EO emerges as one of the important potential factors contributing to the intensification of the processes of internationalisation of the firm (Etemad, 2015; Gupta & Gupta, 2015. It seems that international entrepreneurship (IE has been flourishing. The general theory of entrepreneurship indicates that market opportunities are a common and dominant link for all entrepreneurial activities. The entrepreneurship theory refers to the identification or creation opportunities, their evaluation and exploitation. The expansion into new geographic markets is undoubtedly an important market opportunity for growth and development. The internationalisation as a response to the market opportunity takes diverse paths. Based on the in-depth literature search, this issue of our journal aims to determine whether, why and how, in the context of diverse environmental conditions, the pursuit of market opportunities contributes to the increase of internationalisation of the firm (Dimitratos & Plakoyiannaki, 2003; Dimitratos, Voudouris, Plakoyiannaki & Nakos,. 2012; Wach. 2015.

  16. Impression block with orientator

    International Nuclear Information System (INIS)

    Brilin, V I; Ulyanova, O S

    2015-01-01

    Tool review, namely the impression block, applied to check the shape and size of the top of fish as well as to determine the appropriate tool for fishing operation was realized. For multiple application and obtaining of the impress depth of 3 cm and more, the standard volumetric impression blocks with fix rods are used. However, the registered impress of fish is not oriented in space and the rods during fishing are in the extended position. This leads to rods deformation and sinking due to accidental impacts of impression block over the borehole irregularity and finally results in faulty detection of the top end of fishing object in hole. The impression blocks with copy rods and fixed magnetic needle allow estimating the object configuration and fix the position of magnetic needle determining the position of the top end of object in hole. However, the magnetic needle fixation is realized in staged and the rods are in extended position during fishing operations as well as it is in standard design. The most efficient tool is the impression block with copy rods which directs the examined object in the borehole during readings of magnetic needles data from azimuth plate and averaging of readings. This significantly increases the accuracy of fishing toll direction. The rods during fishing are located in the body and extended only when they reach the top of fishing object

  17. Value oriented marketing strategies

    Directory of Open Access Journals (Sweden)

    Stanković Ljiljana

    2009-01-01

    Full Text Available The complexity of business environment imposes the need for continuous change and reexamination of business marketing strategies of enterprises. Theory and practice of strategic management and marketing show that the activities of marketing, which are closely connected to corporate strategy, are the key drivers of growth. There is a positive correlation between competition intensity, marketing strategy and business performance of companies. Even though, managers of many companies don't see a clear connection between marketing strategy and business performance, numerous empirical research show that the companies which possess and efficiently use marketing resources and capabilities are more successful. In knowledge-based economics, the development of value oriented marketing strategies for all participants in the chain is a supposition of the survival, growth and development of companies. Competitive advantage is the essence of any strategy. Acquisition and maintenance of competitive advantage is more successful if the potentials for value creation are used efficiently. The paper examines the critical factors that influence alignment and transformation of marketing strategies in accordance with changes in value estimation. Superior value, is created in different network classes. Theory and practice researches create a reliable basis for the development of new concepts, marketing strategy business models that will contribute to competitive advantage of enterprises and the economy.

  18. CERN Orienteering Club

    CERN Multimedia

    Club d’Orientation du CERN

    2018-01-01

    Calendrier des courses de la Coupe Genevoise – printemps 2018 C’est reparti pour une nouvelle saison ! Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une série de courses populaires pour ce printemps. Le coup d’envoi sera donné samedi 7 avril à 13h à Trélex dans le canton de Vaud avec une course longue distance. Puis le programme sera le suivant : Samedi 14 avril : Mont Mourex (01) Samedi 21 avril : Pougny (01) Samedi 28 avril : Vulbens (74) Samedi 5 mai : Dorigny (VD) Samedi 19 mai : Prémanon (39) Samedi 26 mai : Chancy (GE) Samedi 2 juin : Monteret (VD) Samedi 9 juin : Bonmont (VD) Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel. Les inscriptions sur un des 5 parcours proposés se font sur place le jour de l&...

  19. Orientation of llama antibodies strongly increases sensitivity of biosensors.

    Science.gov (United States)

    Trilling, Anke K; Hesselink, Thamara; van Houwelingen, Adèle; Cordewener, Jan H G; Jongsma, Maarten A; Schoffelen, Sanne; van Hest, Jan C M; Zuilhof, Han; Beekwilder, Jules

    2014-10-15

    Sensitivity of biosensors depends on the orientation of bio-receptors on the sensor surface. The objective of this study was to organize bio-receptors on surfaces in a way that their analyte binding site is exposed to the analyte solution. VHH proteins recognizing foot-and-mouth disease virus (FMDV) were used for making biosensors, and azides were introduced in the VHH to function as bioorthogonal reactive groups. The importance of the orientation of bio-receptors was addressed by comparing sensors with randomly oriented VHH (with multiple exposed azide groups) to sensors with uniformly oriented VHH (with only a single azide group). A surface plasmon resonance (SPR) chip exposing cyclooctyne was reacted to azide functionalized VHH domains, using click chemistry. Comparison between randomly and uniformly oriented bio-receptors showed up to 800-fold increase in biosensor sensitivity. This technique may increase the containment of infectious diseases such as FMDV as its strongly enhanced sensitivity may facilitate early diagnostics. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Archives: Orient Journal of Medicine

    African Journals Online (AJOL)

    Items 1 - 26 of 26 ... Archives: Orient Journal of Medicine. Journal Home > Archives: Orient Journal of Medicine. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 26 of 26 Items ...

  1. Problem-Oriented Project Work

    DEFF Research Database (Denmark)

    Olsen, Poul Bitsch; Pedersen, Nils Kaare

    This book is meant to support problem-oriented learning activities. Problem-orientation concerns the reasoning about lack of knowledge, while project work includes the ethnomethods that are practiced when collectives produce scientific knowledge. This book reflects particular methods related...

  2. Orientation-crowding within contours.

    Science.gov (United States)

    Glen, James C; Dakin, Steven C

    2013-07-15

    We examined how crowding (the breakdown of object recognition in the periphery caused by interference from "clutter") depends on the global arrangement of target and distracting flanker elements. Specifically we probed orientation discrimination using a near-vertical target Gabor flanked by two vertical distractor Gabors (one above and one below the target). By applying variable (opposite-sign) horizontal offsets to the positions of the two flankers we arranged the elements so that on some trials they formed contours with the target and on others they did not. While the presence of flankers generally elevated orientation discrimination thresholds for the target we observe maximal crowding not when flanker and targets were co-aligned but when a small spatial offset was applied to flanker location, so that contours formed between flanker and targets only when the target orientation was cued. We also report that observers' orientation judgments are biased, with target orientation appearing either attracted or repulsed by the global/contour orientation. A second experiment reveals that the sign of this effect is dependent both on observer and on eccentricity. In general, the magnitude of repulsion is reduced with eccentricity but whether this becomes attraction (of element orientation to contour orientation) is dependent on observer. We note however that across observers and eccentricities, the magnitude of repulsion correlates positively with the amount of release from crowding observed with co-aligned targets and flankers, supporting the notion of fluctuating bias as the basis for elevated crowding within contours.

  3. Postdictive modulation of visual orientation.

    Directory of Open Access Journals (Sweden)

    Takahiro Kawabe

    Full Text Available The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1 or whether the target was vertical or not (Supplementary experiment. The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation. The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2. Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

  4. Postdictive modulation of visual orientation.

    Science.gov (United States)

    Kawabe, Takahiro

    2012-01-01

    The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1) or whether the target was vertical or not (Supplementary experiment). The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation). The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2). Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

  5. Assessing New Employee Orientation Programs

    Science.gov (United States)

    Acevedo, Jose M.; Yancey, George B.

    2011-01-01

    Purpose: This paper aims to examine the importance of new employee orientation (NEO) programs, the quality of typical NEOs, and how to improve NEOs. Design/methodology/approach: The paper provides a viewpoint of the importance of new employee orientation programs, the quality of typical NEOs, and how to improve NEOs. Findings: Although western…

  6. Patterns of Wildlife Value Orientations

    Science.gov (United States)

    Harry C. Zinn; Michael J. Manfredo; Susan C. Barro

    2002-01-01

    Public value orientations toward wildlife may be growing less utilitarian and more protectionist. To better understand one aspect of this trend, we investigated patterns of wildlife value orientations within families. Using a mail survey, we sampled Pennsylvania and Colorado hunting license holders 50 or older; obtaining a 54% response rate (n = 599). Males (94% of...

  7. Different facets of market orientation

    DEFF Research Database (Denmark)

    Ormrod, Robert P.; Henneberg, Stephan C.

    2009-01-01

    the UK parties generally exhibited similar levels of market orientation on each of the relevant construct dimensions, the German parties had more distinct profiles; thus the applied dimensions of political market orientation show discriminatory power within and across electoral systems. In the UK......In this study we employ the concept of political market orientation to better understand how the main political parties in the UK and Germany relate to other stakeholders in the political sphere through an exploratory content analysis of their core election offering, the manifesto. This study has...... two aims: firstly, we will discuss the different facets of the market orientation of the main UK and German parties in their respective 2005 General Elections through an exploratory content analysis, and secondly, we will compare characteristics of market orientation between the two countries. Whilst...

  8. Customizable Time-Oriented Visualizations

    DEFF Research Database (Denmark)

    Kuhail, Mohammad Amin; Pantazos, Kostas; Lauesen, Søren

    2012-01-01

    Most commercial visualization tools support an easy and quick creation of conventional time-oriented visualizations such as line charts, but customization is limited. In contrast, some academic visualization tools and programming languages support the creation of some customizable time......-oriented visualizations but it is time consuming and hard. To combine efficiency, the effort required to develop a visualization, and customizability, the ability to tailor a visualization, we developed time-oriented building blocks that address the specifics of time (e.g. linear vs. cyclic or point-based vs. interval......-based) and consist of inner customizable parts (e.g. ticks). A combination of the time-oriented and other primitive graphical building blocks allowed the creation of several customizable advanced time-oriented visualizations. The appearance and behavior of the blocks are specified using spreadsheet-like formulas. We...

  9. Random Decrement

    DEFF Research Database (Denmark)

    Asmussen, J.C.; Ibrahim, S.R.; Brincker, Rune

    Abstraet Thispaper demansirates how to use the Random Decrement (RD) technique for identification o flinear structures subjected to ambient excitation. The theory behind the technique will be presented and guidelines how to choose the different variables will be given. This is done by introducing...

  10. Random Decrement

    DEFF Research Database (Denmark)

    Asmussen, J. C.; Ibrahim, S. R.; Brincker, Rune

    This paper demonstrates how to use the Random Decrement (RD) technique for identification of linear structures subjected to ambient excitation. The theory behind the technique will be presented and guidelines how to choose the different variables will be given. This is done by introducing a new...

  11. Random Decrement

    DEFF Research Database (Denmark)

    Asmussen, J. C.; Ibrahim, R.; Brincker, Rune

    1998-01-01

    This paper demonstrates how to use the Random Decrement (RD) technique for identification of linear structures subjected to ambient excitation. The theory behind the technique will be presented and guidelines how to choose the different variables will be given. This is done by introducing a new...

  12. Random dynamics

    International Nuclear Information System (INIS)

    Bennett, D.L.; Brene, N.; Nielsen, H.B.

    1986-06-01

    The goal of random dynamics is the derivation of the laws of Nature as we know them (standard model) from inessential assumptions. The inessential assumptions made here are expressed as sets of general models at extremely high energies: gauge glass and spacetime foam. Both sets of models lead tentatively to the standard model. (orig.)

  13. Random dynamics

    International Nuclear Information System (INIS)

    Bennett, D.L.

    1987-01-01

    The goal of random dynamics is the derivation of the laws of Nature as we know them (standard model) from inessential assumptions. The inessential assumptions made here are expressed as sets of general models at extremely high energies: Gauge glass and spacetime foam. Both sets of models lead tentatively to the standard model. (orig.)

  14. Random Dynamics

    Science.gov (United States)

    Bennett, D. L.; Brene, N.; Nielsen, H. B.

    1987-01-01

    The goal of random dynamics is the derivation of the laws of Nature as we know them (standard model) from inessential assumptions. The inessential assumptions made here are expressed as sets of general models at extremely high energies: gauge glass and spacetime foam. Both sets of models lead tentatively to the standard model.

  15. Strong orientational coordinates and orientational order parameters for symmetric objects

    International Nuclear Information System (INIS)

    Haji-Akbari, Amir; Glotzer, Sharon C

    2015-01-01

    Recent advancements in the synthesis of anisotropic macromolecules and nanoparticles have spurred an immense interest in theoretical and computational studies of self-assembly. The cornerstone of such studies is the role of shape in self-assembly and in inducing complex order. The problem of identifying different types of order that can emerge in such systems can, however, be challenging. Here, we revisit the problem of quantifying orientational order in systems of building blocks with non-trivial rotational symmetries. We first propose a systematic way of constructing orientational coordinates for such symmetric building blocks. We call the arising tensorial coordinates strong orientational coordinates (SOCs) as they fully and exclusively specify the orientation of a symmetric object. We then use SOCs to describe and quantify local and global orientational order, and spatiotemporal orientational correlations in systems of symmetric building blocks. The SOCs and the orientational order parameters developed in this work are not only useful in performing and analyzing computer simulations of symmetric molecules or particles, but can also be utilized for the efficient storage of rotational information in long trajectories of evolving many-body systems. (paper)

  16. Chromosome Gene Orientation Inversion Networks (GOINs) of Plasmodium Proteome.

    Science.gov (United States)

    Quevedo-Tumailli, Viviana F; Ortega-Tenezaca, Bernabé; González-Díaz, Humbert

    2018-03-02

    The spatial distribution of genes in chromosomes seems not to be random. For instance, only 10% of genes are transcribed from bidirectional promoters in humans, and many more are organized into larger clusters. This raises intriguing questions previously asked by different authors. We would like to add a few more questions in this context, related to gene orientation inversions. Does gene orientation (inversion) follow a random pattern? Is it relevant to biological activity somehow? We define a new kind of network coined as the gene orientation inversion network (GOIN). GOIN's complex network encodes short- and long-range patterns of inversion of the orientation of pairs of gene in the chromosome. We selected Plasmodium falciparum as a case of study due to the high relevance of this parasite to public health (causal agent of malaria). We constructed here for the first time all of the GOINs for the genome of this parasite. These networks have an average of 383 nodes (genes in one chromosome) and 1314 links (pairs of gene with inverse orientation). We calculated node centralities and other parameters of these networks. These numerical parameters were used to study different properties of gene inversion patterns, for example, distribution, local communities, similarity to Erdös-Rényi random networks, randomness, and so on. We find clues that seem to indicate that gene orientation inversion does not follow a random pattern. We noted that some gene communities in the GOINs tend to group genes encoding for RIFIN-related proteins in the proteome of the parasite. RIFIN-like proteins are a second family of clonally variant proteins expressed on the surface of red cells infected with Plasmodium falciparum. Consequently, we used these centralities as input of machine learning (ML) models to predict the RIFIN-like activity of 5365 proteins in the proteome of Plasmodium sp. The best linear ML model found discriminates RIFIN-like from other proteins with sensitivity and

  17. Biomass equations for forest regrowth in the eastern Amazon using randomized branch sampling Equações alométricas para estimativa de biomassa de floresta secundária na Amazônia Oriental usando amostragem aleatória de ramos

    Directory of Open Access Journals (Sweden)

    Mark Jonathan Ducey

    2009-01-01

    Full Text Available Forest regrowth occupies an extensive and increasing area in the Amazon basin, but accurate assessment of the impact of regrowth on carbon and nutrient cycles has been hampered by a paucity of available allometric equations. We develop pooled and species-specific equations for total aboveground biomass for a study site in the eastern Amazon that had been abandoned for 15 years. Field work was conducted using randomized branch sampling, a rapid technique that has seen little use in tropical forests. High consistency of sample paths in randomized branch sampling, as measured by the standard error of individual paths (14%, suggests the method may provide substantial efficiencies when compared to traditional procedures. The best fitting equations in this study used the traditional form Y=a×DBHb, where Y is biomass, DBH is diameter at breast height, and a and b are both species-specific parameters. Species-specific equations of the form Y=a(BA×H, where Y is biomass, BA is tree basal area, H is tree height, and a is a species-specific parameter, fit almost as well. Comparison with previously published equations indicated errors from -33% to +29% would have occurred using off-site relationships. We also present equations for stemwood, twigs, and foliage as biomass components.Florestas secundárias ocupam uma área extensa e crescente na bacia Amazônica, porém determinações acuradas do impacto dessas florestas nos ciclos de carbono e nutrientes têm sido dificultadas pelo número reduzido de equações alométricas. Neste estudo, nós desenvolvemos equações em nível de comunidade e espécies individuais para estimar a biomassa total da parte aérea de uma floresta secundária com 15 anos de idade na Amazônia oriental. O trabalho de campo utilizou amostragem aleatória de ramos, que é uma técnica rápida, porém pouco utilizada em florestas tropicais. Baseada no erro padrão da série de segmentos individuais (14%, a consistência da s

  18. Texture orientation of glancing angle deposited copper nanowire arrays

    International Nuclear Information System (INIS)

    Alouach, H.; Mankey, G.J.

    2004-01-01

    Self-assembled copper nanowires were deposited on native oxide Si(100) substrates using glancing angle deposition with and without substrate rotation. Wire morphology, texture and crystallographic orientation are strongly dependent on the deposition parameters. A method for determining the preferred crystal orientation is described. This orientation is found to be different from what is expected from the geometric orientation of the wires. For wires deposited without substrate rotation, the face-centered-cubic (fcc)(111) crystal orientation, which corresponds to the close-packed, low surface energy (111) plane of copper, lies between the long axis of the wire and that normal to the substrate. X-ray diffraction data show that the wires exhibit bundling behavior perpendicular to the plane of incidence. For samples deposited with azimuthal rotation of the substrate, the fcc(111) directions in the wires are evenly distributed in a cone around the long axis of the wires, which point normal to the substrate. When the substrate is rotated during deposition at an angle of 75 deg., the wires exhibit a strong fcc(220) texture. These observations show that wires deposited with substrate rotation are highly textured and have random orientations in the plane of the substrate

  19. The influence of career orientations on subjective work experiences

    Directory of Open Access Journals (Sweden)

    Melinde Coetzee

    2010-11-01

    Research purpose: The study empirically assessed the causal influence of individuals’ career orientations on their perceived life satisfaction, job or career satisfaction, sense of happiness and their perceptions of work as a valuable activity as aspects of their subjective work experiences. Motivation for study: From an organisational perspective, research on individuals’ inner definitions of career success and satisfaction is needed to guide current selection, placement, development, reward and retention practices. Research design, approach and method: A quantitative survey was conducted on a random sample of 2997 participants at predominantly managerial and supervisory level in the service industry. The measuring instruments consisted of an adapted five-factor career orientations model of the Career Orientations Inventory and a 4-item global subjective work experiences scale. Structural equation modelling (SEM was conducted to achieve the aim of the study. Main findings/results: Statistically significant causal relationships were observed between the career orientations and subjective work experiences variables. Practical implications: Individuals’ career orientations influence their general sense of life and job or career satisfaction, happiness and perceptions of work as a valuable activity. Organisations concerned with the retention of staff need to find a way of aligning individuals’ career needs and motives with the goals and aspirations of the organisation. Contribution/value-add: The research confirms the need for assessing the inner career orientations of employees as these provide valuable information regarding the motives and values driving individuals’ career decision making and subjective experiences of their working lives.

  20. The equivalent internal orientation and position noise for contour integration.

    Science.gov (United States)

    Baldwin, Alex S; Fu, Minnie; Farivar, Reza; Hess, Robert F

    2017-10-12

    Contour integration is the joining-up of local responses to parts of a contour into a continuous percept. In typical studies observers detect contours formed of discrete wavelets, presented against a background of random wavelets. This measures performance for detecting contours in the limiting external noise that background provides. Our novel task measures contour integration without requiring any background noise. This allowed us to perform noise-masking experiments using orientation and position noise. From these we measure the equivalent internal noise for contour integration. We found an orientation noise of 6° and position noise of 3 arcmin. Orientation noise was 2.6x higher in contour integration compared to an orientation discrimination control task. Comparing against a position discrimination task found position noise in contours to be 2.4x lower. This suggests contour integration involves intermediate processing that enhances the quality of element position representation at the expense of element orientation. Efficiency relative to the ideal observer was lower for the contour tasks (36% in orientation noise, 21% in position noise) compared to the controls (54% and 57%).

  1. Low-temperature nuclear orientation

    International Nuclear Information System (INIS)

    Stone, N.J.; Postma, H.

    1986-01-01

    This book comprehensively surveys the many aspects of the low temperature nuclear orientation method. The angular distribution of radioactive emissions from nuclei oriented by hyperfine interactions in solids, is treated experimentally and theoretically. A general introductory chapter is followed by formal development of the theory of the orientation process and the anisotropic emission of decay products from oriented nuclei, applied to radioactive decay and to reactions. Five chapters on applications to nuclear physics cover experimental studies of alpha, beta and gamma emission, nuclear moment measurement and level structure information. Nuclear orientation studies of parity non-conservation and time reversal asymmetry are fully described. Seven chapters cover aspects of hyperfine interactions, magnetic and electric, in metals, alloys and insulating crystals, including ordered systems. Relaxation phenomena and the combined technique of NMR detection using oriented nuclei are treated at length. Chapters on the major recent development of on-line facilities, giving access to short lived nuclei far from stability, on the use of nuclear orientation for thermometry below 1 Kelvin and on technical aspects of the method complete the main text. Extensive appendices, table of relevant parameters and over 1000 references are included to assist the design of future experiments. (Auth.)

  2. Oriented active shape models.

    Science.gov (United States)

    Liu, Jiamin; Udupa, Jayaram K

    2009-04-01

    Active shape models (ASM) are widely employed for recognizing anatomic structures and for delineating them in medical images. In this paper, a novel strategy called oriented active shape models (OASM) is presented in an attempt to overcome the following five limitations of ASM: 1) lower delineation accuracy, 2) the requirement of a large number of landmarks, 3) sensitivity to search range, 4) sensitivity to initialization, and 5) inability to fully exploit the specific information present in the given image to be segmented. OASM effectively combines the rich statistical shape information embodied in ASM with the boundary orientedness property and the globally optimal delineation capability of the live wire methodology of boundary segmentation. The latter characteristics allow live wire to effectively separate an object boundary from other nonobject boundaries with similar properties especially when they come very close in the image domain. The approach leads to a two-level dynamic programming method, wherein the first level corresponds to boundary recognition and the second level corresponds to boundary delineation, and to an effective automatic initialization method. The method outputs a globally optimal boundary that agrees with the shape model if the recognition step is successful in bringing the model close to the boundary in the image. Extensive evaluation experiments have been conducted by utilizing 40 image (magnetic resonance and computed tomography) data sets in each of five different application areas for segmenting breast, liver, bones of the foot, and cervical vertebrae of the spine. Comparisons are made between OASM and ASM based on precision, accuracy, and efficiency of segmentation. Accuracy is assessed using both region-based false positive and false negative measures and boundary-based distance measures. The results indicate the following: 1) The accuracy of segmentation via OASM is considerably better than that of ASM; 2) The number of landmarks

  3. Deconstructing sexual orientation: understanding the phenomena of sexual orientation.

    Science.gov (United States)

    Stein, T S

    1997-01-01

    The very terms of a debate about whether or not sexual orientation is primarily a biological phenomenon fail to consider the complex origins of the phenomenon. Deconstruction of the term "homosexuality" shows that it refers to multiple factors which cannot be studied as or subsumed under a unitary concept. Adequate understanding of sexual orientation must consider the developmental, interpersonal, experiential, and cultural dimensions of sexuality, as well as any biological contributions to sexual attraction, behavior, and identity.

  4. Freely oriented portable superconducting magnet

    Science.gov (United States)

    Schmierer, Eric N [Los Alamos, NM; Prenger, F Coyne [Los Alamos, NM; Hill, Dallas D [Los Alamos, NM

    2010-01-12

    A freely oriented portable superconducting magnet is disclosed. Coolant is supplied to the superconducting magnet from a repository separate from the magnet, enabling portability of the magnet. A plurality of support assemblies structurally anchor and thermally isolate the magnet within a thermal shield. A plurality of support assemblies structurally anchor and thermally isolate the thermal shield within a vacuum vessel. The support assemblies restrain movement of the magnet resulting from energizing and cooldown, as well as from changes in orientation, enabling the magnet to be freely orientable.

  5. Thermoregulatory behavior and orientation preference in bearded dragons.

    Science.gov (United States)

    Black, Ian R G; Tattersall, Glenn J

    2017-10-01

    The regulation of body temperature is a critical function for animals. Although reliant on ambient temperature as a heat source, reptiles, and especially lizards, make use of multiple voluntary and involuntary behaviors to thermoregulate, including postural changes in body orientation, either toward or away from solar sources of heat. This thermal orientation may also result from a thermoregulatory drive to maintain precise control over cranial temperatures or a rostrally-driven sensory bias. The purpose of this work was to examine thermal orientation behavior in adult and neonatal bearded dragons (Pogona vitticeps), to ascertain its prevalence across different life stages within a laboratory situation and its interaction with behavioral thermoregulation. Both adult and neonatal bearded dragons were placed in a thermal gradient and allowed to voluntarily select temperatures for up to 8h to observe the presence and development of a thermoregulatory orientation preference. Both adult and neonatal dragons displayed a non-random orientation, preferring to face toward a heat source while achieving mean thermal preferences of ~ 33-34°C. Specifically, adult dragons were more likely to face a heat source when at cooler ambient temperatures and less likely at warmer temperatures, suggesting that orientation behavior counter-balances local selected temperatures but contributes to their thermoregulatory response. Neonates were also more likely to select cooler temperatures when facing a heat source, but required more experience before this orientation behavior emerged. Combined, these results demonstrate the importance of orientation to behavioral thermoregulation in multiple life stages of bearded dragons. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. The relationships between market orientation and alternative strategic orientations : A meta-analysis

    NARCIS (Netherlands)

    Grinstein, A.

    2008-01-01

    Purpose - One of the strongest convictions in marketing is that market orientation contributes to firms' performance substantially more than alternative strategic orientations such as innovation and entrepreneurial orientations. Still, some studies show that alternative orientations can also

  7. Object-Oriented Type Systems

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    a type system that generalizes and explains them. The theory is based on an idealized object-oriented language called BOPL (Basic Object Programming Language), containing common features of the above languages. A type system, type inference algorithm, and typings of inheritance and genericity......Object-Oriented Type Systems Jens Palsberg and Michael I. Schwartzbach Aarhus University, Denmark Type systems are required to ensure reliability and efficiency of software. For object-oriented languages, typing is an especially challenging problem because of inheritance, assignment, and late...... are provided for BOPL. Throughout, the results are related to the languages on which BOPL is based. This text offers advanced undergraduates and professional software developers a sound understanding of the key aspects of object-oriented type systems. All algorithms are implemented in a freely available...

  8. Position and orientation tracking system

    International Nuclear Information System (INIS)

    Burks, B.L.; DePiero, F.W.; Armstrong, G.A.; Jansen, J.F.; Muller, R.C.; Gee, T.F.

    1998-01-01

    A position and orientation tracking system presents a laser scanning apparatus having two measurement pods, a control station, and a detector array. The measurement pods can be mounted in the dome of a radioactive waste storage silo. Each measurement pod includes dual orthogonal laser scanner subsystems. The first laser scanner subsystem is oriented to emit a first line laser in the pan direction. The second laser scanner is oriented to emit a second line laser in the tilt direction. Both emitted line lasers scan planes across the radioactive waste surface to encounter the detector array mounted on a target robotic vehicle. The angles of incidence of the planes with the detector array are recorded by the control station. Combining measurements describing each of the four planes provides data for a closed form solution of the algebraic transform describing the position and orientation of the target robotic vehicle. 14 figs

  9. Laser induced nuclear orientation effects

    International Nuclear Information System (INIS)

    Burns, M.; Pappas, P.; Feld, M.S.; Murnick, D.E.

    1977-01-01

    Resonant laser radiation can orient metastable nuclei, resulting in spatially anisotropic emission of β or γ radiation. This technique can be used to obtain isomer shifts and nuclear moments and can lead to isomer separation. (Auth.)

  10. Laser Controlled Molecular Orientation Dynamics

    International Nuclear Information System (INIS)

    Atabek, O.

    2004-01-01

    Molecular orientation is a challenging control issue covering a wide range of applications from reactive collisions, high order harmonic generation, surface processing and catalysis, to nanotechnologies. The laser control scenario rests on the following three steps: (i) depict some basic mechanisms producing dynamical orientation; (ii) use them both as computational and interpretative tools in optimal control schemes involving genetic algorithms; (iii) apply what is learnt from optimal control to improve the basic mechanisms. The existence of a target molecular rotational state combining the advantages of efficient and post-pulse long duration orientation is shown. A strategy is developed for reaching such a target in terms of a train of successive short laser pulses applied at predicted time intervals. Each individual pulse imparts a kick to the molecule which orients. Transposition of such strategies to generic systems is now under investigation

  11. Interdisciplinary Problem Oriented Project Work

    DEFF Research Database (Denmark)

    Blomhøj, Morten; Kjeldsen, Tinne Hoff

    2018-01-01

    In this chapter, we analyze the problem oriented project work practiced at the Bachelor Study Program in Natural Science (Nat Bach) at Roskilde University (RU) as a learning environment for developing students’ mathematical modelling competence. The projects are conducted in a rather sophisticated...... and radical learning environment grounded on the four pedagogical key principles of, problem orientation, participant directed group work, interdisciplinarity and exemplarity. We illustrate and discuss the interplay between the aim of developing the students’ modelling competence on the one hand...

  12. Security for service oriented architectures

    CERN Document Server

    Williams, Walter

    2014-01-01

    Although integrating security into the design of applications has proven to deliver resilient products, there are few books available that provide guidance on how to incorporate security into the design of an application. Filling this need, Security for Service Oriented Architectures examines both application and security architectures and illustrates the relationship between the two. Supplying authoritative guidance on how to design distributed and resilient applications, the book provides an overview of the various standards that service oriented and distributed applications leverage, includ

  13. Enrollment of SME Managers to Growth-oriented Training Programs

    DEFF Research Database (Denmark)

    Bager, Torben; Jensen, Kent Wickstrøm; Schou Nielsen, Pia

    2015-01-01

    Purpose: Entrepreneurial learning through formal growth-oriented training programs for SME managers promises to enhance the growth competences and growth intentions of the enrolled managers. The impact of such programs, however, depends on who enrolls since initial competence and growth-intention......Purpose: Entrepreneurial learning through formal growth-oriented training programs for SME managers promises to enhance the growth competences and growth intentions of the enrolled managers. The impact of such programs, however, depends on who enrolls since initial competence and growth...... has from 2012 to 2015 trained about 700 SME managers. Data are currently available for 366 of these participants. This evidence is compared with survey results from a randomly selected control group of 292 growth oriented SME managers in the same firm-size group. The data were analyzed through...... of the program. Originality/value The paper is the first systematic study of the importance of who enrolls in training programs for SME managers....

  14. On Generalization in Qualitatively Oriented Research

    Directory of Open Access Journals (Sweden)

    Philipp Mayring

    2007-09-01

    Full Text Available In this article, I open a debate about the importance and possibilities of generalization in qualitative oriented research. Generalization traditionally is seen as a central aim of science, as a process of theory formulation for further applications. Others criticize the concept in general, either because of the insufficiency of inductive arguments (POPPER, 1959 or because of context specificity of all scientific findings (LINCOLN & GUBA, 1985. In this paper, I argue that generalization is necessary in qualitative research, but we have to differentiate different aims of generalization: laws, rules, context specific statements, similarities and differences, and procedures. There are different possibilities to arrive at a generalization: analysis of total population, falsification, random or stratified samples, argumentative generalization, theoretical sampling, variation, and triangulation. Depending on the type of research or research design some of those strategies of generalization can be important for qualitative oriented research. This is discussed especially in respect to single case analysis. URN: urn:nbn:de:0114-fqs0703262

  15. Orientation of crystals in alanine dosimeter assessed by DRS, as seen in EPR spectra evaluation

    International Nuclear Information System (INIS)

    Grazyna Przybytniak; Zagorski, Z.P.

    1996-01-01

    The alanine dosimeter made for evaluation by diffuse light reflection spectrophotometry (ALA/DRS) does not show the effect of orientation of crystals. Supposed deviation from random orientation has been investigated by EPR spectroscopy. EPR investigation shows that in spite of the very fine size of L-alanine crystals, they are oriented in thin layers of the polyethylene matrix. Specially prepared films with deliberately well oriented crystals have confirmed this observation. Our ALA/DRS dosimeter can be evaluated by the EPR method for the concentration of free radicals, providing that the dominating crystal orientation in the dosimetric film is indicated on it as an arrow, and the sample is inserted into the magnetic cavity always in the same orientation as has been done during the calibration operation. (author). 6 refs., 2 figs

  16. Picosecond orientational dynamics of water in living cells.

    Science.gov (United States)

    Tros, Martijn; Zheng, Linli; Hunger, Johannes; Bonn, Mischa; Bonn, Daniel; Smits, Gertien J; Woutersen, Sander

    2017-10-12

    Cells are extremely crowded, and a central question in biology is how this affects the intracellular water. Here, we use ultrafast vibrational spectroscopy and dielectric-relaxation spectroscopy to observe the random orientational motion of water molecules inside living cells of three prototypical organisms: Escherichia coli, Saccharomyces cerevisiae (yeast), and spores of Bacillus subtilis. In all three organisms, most of the intracellular water exhibits the same random orientational motion as neat water (characteristic time constants ~9 and ~2 ps for the first-order and second-order orientational correlation functions), whereas a smaller fraction exhibits slower orientational dynamics. The fraction of slow intracellular water varies between organisms, ranging from ~20% in E. coli to ~45% in B. subtilis spores. Comparison with the water dynamics observed in solutions mimicking the chemical composition of (parts of) the cytosol shows that the slow water is bound mostly to proteins, and to a lesser extent to other biomolecules and ions.The cytoplasm's crowdedness leads one to expect that cell water is different from bulk water. By measuring the rotational motion of water molecules in living cells, Tros et al. find that apart from a small fraction of water solvating biomolecules, cell water has the same dynamics as bulk water.

  17. Nuclear orientation studies of rare-earth metals

    International Nuclear Information System (INIS)

    Krane, K.S.; Morgan, G.L.; Moses, J.D.

    1981-01-01

    The angular distributions of gamma rays from 166 sup(m)Ho and 160 Tb aligned at low temperatures in, respectively, Ho metal and Tb metal have been measured. Large hyperfine splittings, expected for the rare earths, have been deduced from the temperature dependence of the gamma ray anisotropies. Both samples show a macroscopic magnetic anisotropy which is not consistent with an interpretation in terms of a randomly oriented polycrystalline structure. (orig.)

  18. Preferred orientation determination using line source x-ray diffraction

    International Nuclear Information System (INIS)

    Kimmel, G.; Shmarjahu, D.

    1977-10-01

    A texture goniometer has been attached to a diffractometer connected to a line-focus x-ray source. Reasonable results are obtained for the texture of rolled sheets and the test procedure is given. To illustrate the test procedure, the determination of preferred orientation in cold-rolled copper is described, as compared with random powder of sintered copper. Improvements of the measurements are proposed

  19. Random tensors

    CERN Document Server

    Gurau, Razvan

    2017-01-01

    Written by the creator of the modern theory of random tensors, this book is the first self-contained introductory text to this rapidly developing theory. Starting from notions familiar to the average researcher or PhD student in mathematical or theoretical physics, the book presents in detail the theory and its applications to physics. The recent detections of the Higgs boson at the LHC and gravitational waves at LIGO mark new milestones in Physics confirming long standing predictions of Quantum Field Theory and General Relativity. These two experimental results only reinforce today the need to find an underlying common framework of the two: the elusive theory of Quantum Gravity. Over the past thirty years, several alternatives have been proposed as theories of Quantum Gravity, chief among them String Theory. While these theories are yet to be tested experimentally, key lessons have already been learned. Whatever the theory of Quantum Gravity may be, it must incorporate random geometry in one form or another....

  20. Fundamentals of randomized clinical trials in wound care

    DEFF Research Database (Denmark)

    Eskes, Anne M; Brölmann, Fleur E; Sumpio, Bauer E

    2012-01-01

    randomization is a necessary feature of a robust comparative study, it is not sufficient to ensure a study at low risk of bias. Randomized clinical trials should also ensure adequate allocation concealment and blinding of outcome assessors, apply intention-to-treat analysis, and use patient-oriented outcomes...

  1. Technology and developments for the Random Positioning Machine, RPM

    NARCIS (Netherlands)

    Borst, A.G.; van Loon, J.J.W.A.

    2009-01-01

    A Random Positioning Machine (RPM) is a laboratory instrument to provide continuous random change in orientation relative to the gravity vector of an accommodated (biological) experiment. The use of the RPM can generate eff ects comparable to the eff ects of true microgravity when the changes in

  2. Monetary rewards influence retrieval orientations.

    Science.gov (United States)

    Halsband, Teresa M; Ferdinand, Nicola K; Bridger, Emma K; Mecklinger, Axel

    2012-09-01

    Reward anticipation during learning is known to support memory formation, but its role in retrieval processes is so far unclear. Retrieval orientations, as a reflection of controlled retrieval processing, are one aspect of retrieval that might be modulated by reward. These processes can be measured using the event-related potentials (ERPs) elicited by retrieval cues from tasks with different retrieval requirements, such as via changes in the class of targeted memory information. To determine whether retrieval orientations of this kind are modulated by reward during learning, we investigated the effects of high and low reward expectancy on the ERP correlates of retrieval orientation in two separate experiments. The reward manipulation at study in Experiment 1 was associated with later memory performance, whereas in Experiment 2, reward was directly linked to accuracy in the study task. In both studies, the participants encoded mixed lists of pictures and words preceded by high- or low-reward cues. After 24 h, they performed a recognition memory exclusion task, with words as the test items. In addition to a previously reported material-specific effect of retrieval orientation, a frontally distributed, reward-associated retrieval orientation effect was found in both experiments. These findings suggest that reward motivation during learning leads to the adoption of a reward-associated retrieval orientation to support the retrieval of highly motivational information. Thus, ERP retrieval orientation effects not only reflect retrieval processes related to the sought-for materials, but also relate to the reward conditions with which items were combined during encoding.

  3. Effects of Schwann cell alignment along the oriented electrospun chitosan nanofibers on nerve regeneration.

    Science.gov (United States)

    Wang, Wei; Itoh, Soichiro; Konno, Katsumi; Kikkawa, Takeshi; Ichinose, Shizuko; Sakai, Katsuyoshi; Ohkuma, Tsuneo; Watabe, Kazuhiko

    2009-12-15

    We have constructed a chitosan nonwoven nanofiber mesh tube consisting of oriented fibers by the electrospinning method. The efficacy of oriented nanofibers on Schwann cell alignment and positive effect of this tube on peripheral nerve regeneration were confirmed. The physical properties of the chitosan nanofiber mesh sheets prepared by electrospinning with or without fiber orientation were characterized. Then, immortalized Schwann cells were cultured on these sheets. Furthermore, the chitosan nanofiber mesh tubes with or without orientation, and bilayered chitosan mesh tube with an inner layer of oriented nanofibers and an outer layer of randomized nanofibers were bridgegrafted into rat sciatic nerve defect. As a result of fiber orientation, the tensile strength along the axis of the sheet increased. Because Schwann cells aligned along the nanofibers, oriented fibrous sheets could exhibit a Schwann cell column. Functional recovery and electrophysiological recovery occurred in time in the oriented group as well as in the bilayered group, and approximately matched those in the isograft. Furthermore, histological analysis revealed that the sprouting of myelinated axons occurred vigorously followed by axonal maturation in the isograft, oriented, and bilayered group in the order. The oriented chitosan nanofiber mesh tube may be a promising substitute for autogenous nerve graft.

  4. Sexual orientation and spatial memory.

    Science.gov (United States)

    Cánovas, Ma Rosa; Cimadevilla, José Manuel

    2011-11-01

    The present study aimed at determining the influence of sexual orientation in human spatial learning and memory. Participants performed the Boxes Room, a virtual reality version of the Holeboard. In Experiment I, a reference memory task, the position of the hidden rewards remained constant during the whole experiment. In Experiment II, a working memory task, the position of rewards changed between blocks. Each block consisted of two trials: One trial for acquisition and another for retrieval. The results of Experiment I showed that heterosexual men performed better than homosexual men and heterosexual women. They found the rewarded boxes faster. Moreover, homosexual participants committed more errors than heterosexuals. Experiment II showed that working memory abilities are the same in groups of different sexual orientation. These results suggest that sexual orientation is related to spatial navigation abilities, but mostly in men, and limited to reference memory, which depends more on the function of the hippocampal system.

  5. Object-Oriented Type Systems

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    binding. Existing languages employ different type systems, and it can be difficult to compare, evaluate and improve them, since there is currently no uniform theory for such languages. This book provides such a theory. The authors review the type systems of Simula, Smalltalk, C++ and Eiffel and present......Object-Oriented Type Systems Jens Palsberg and Michael I. Schwartzbach Aarhus University, Denmark Type systems are required to ensure reliability and efficiency of software. For object-oriented languages, typing is an especially challenging problem because of inheritance, assignment, and late...... a type system that generalizes and explains them. The theory is based on an idealized object-oriented language called BOPL (Basic Object Programming Language), containing common features of the above languages. A type system, type inference algorithm, and typings of inheritance and genericity...

  6. Moessbauer effects on oriented nuclei

    International Nuclear Information System (INIS)

    Sayouti, E.H.

    1984-01-01

    Standard nuclear orientation methods (not sensitive to the polarization) do not give information on the sign of the magnetic moment. Mossbauer effect separates right-hand and left-hand circularly polarized components, thus its detection on oriented nuclei (T approximately 10 mK) gives the sign of the magnetic moment of oriented state. In this thesis we applied this method to study the 3/2 - ground states of 191 Pt and 193 Os, which are in the prolate-oblate transition region, where assignement of experimental levels to theoretical states is often umbiguous. We show that for those nuclei the sign of the magnetic moment is the signature of the configuration, and its determination establishes the correspondance between experimental and theoretical levels [fr

  7. Competing strategically through market orientation.

    Science.gov (United States)

    Rapert, M I; Yarbrough, L

    1997-01-01

    As organizations seek to better understand their customers, competitors, and environments, the marketing function effectively serves as the support mechanism for these activities in many industries. Accordingly, in many organizations the marketing concept has been elevated to the stature of a strategic weapon, manifested in the form of market orientation. Market-oriented firms emphasize the collection, organization, and dissemination of information regarding both customers and competitors. This strategy is especially well-suited for the health care industry where customer knowledge is of paramount importance, customer interaction is instantaneous, and customer satisfaction is essential. Results of a national study of general service hospitals suggest that firms which embrace a market orientation benefit through enhanced customer satisfaction and quality.

  8. Experimental Object-Oriented Modelling

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius

    through, e.g., technical prototyping and active user involvement. We introduce and examine “experimental object-oriented modelling” as the intersection of these practices. The contributions of this thesis are expected to be within three perspectives on models and modelling in experimental system...... development: Grounding We develop an empirically based conceptualization of modelling and use of models in system development projects characterized by a high degree of uncertainty in requirements and point to implications for tools and techniques for modelling in such a setting. Techniques We introduce......This thesis examines object-oriented modelling in experimental system development. Object-oriented modelling aims at representing concepts and phenomena of a problem domain in terms of classes and objects. Experimental system development seeks active experimentation in a system development project...

  9. From service-oriented architecture to service-oriented enterprise

    NARCIS (Netherlands)

    van Sinderen, Marten J.; Cordeiro, J.; Ivanov, I.; Shishkov, Boris

    2009-01-01

    Service-Oriented Architecture (SOA) was originally motivated by enterprise demands for better business-technology alignment and higher flexibility and reuse. SOA evolved from an initial set of ideas and principles to Web services (WS) standards now widely accepted by industry. The next phase of SOA

  10. Social Dominance Orientation, Language Orientation, and Deaf Identity

    Science.gov (United States)

    Marschark, Marc; Zettler, Ingo; Dammeyer, Jesper

    2017-01-01

    The notion of the Deaf community as a linguistic-cultural minority has been increasingly recognized and studied over the last two decades. However, significant differences of opinion and perspective within that population typically have been neglected in the literature. Social dominance orientation (SDO), a theoretical construct, typically…

  11. Spin orientation for nearby galaxies

    International Nuclear Information System (INIS)

    Karachentsev, I.D.

    1989-01-01

    The spatial orientations and the absolute values of angular momentum are determined for galaxies in the Local Group and the M 81/IC 342 group. For this purpose, the data on both velocity field and the dust knots configuration have been used. The spin direction has been established unambiguously for 21 objects; however, for the remaining 14 dwarf members the spin orientations are presented by pairs of alternative directions. The distribution of the spin vectors on the sky does not slow pronounced sings of anisotropy

  12. Aspect-oriented programming evaluated

    CERN Document Server

    Kleinschmager, Sebastian

    2012-01-01

    Hauptbeschreibung Aspect-oriented-programming is a relatively new technique that has evolved on top of the already well-established approach of object-oriented programming. When it is used correctly, it promises to remove many redundant parts of a code that appear repeatedly in an application, essentially untangling the original code. Thus, it can lead to a cleaner, more separated software design, to greater modularity and maintainability. Time-savings in software engineering can also be huge cost-savings, and anything that increases software quality is a welcome sight in an industr

  13. Random pulse generator

    International Nuclear Information System (INIS)

    Guo Ya'nan; Jin Dapeng; Zhao Dixin; Liu Zhen'an; Qiao Qiao; Chinese Academy of Sciences, Beijing

    2007-01-01

    Due to the randomness of radioactive decay and nuclear reaction, the signals from detectors are random in time. But normal pulse generator generates periodical pulses. To measure the performances of nuclear electronic devices under random inputs, a random generator is necessary. Types of random pulse generator are reviewed, 2 digital random pulse generators are introduced. (authors)

  14. Random matrices and random difference equations

    International Nuclear Information System (INIS)

    Uppuluri, V.R.R.

    1975-01-01

    Mathematical models leading to products of random matrices and random difference equations are discussed. A one-compartment model with random behavior is introduced, and it is shown how the average concentration in the discrete time model converges to the exponential function. This is of relevance to understanding how radioactivity gets trapped in bone structure in blood--bone systems. The ideas are then generalized to two-compartment models and mammillary systems, where products of random matrices appear in a natural way. The appearance of products of random matrices in applications in demography and control theory is considered. Then random sequences motivated from the following problems are studied: constant pulsing and random decay models, random pulsing and constant decay models, and random pulsing and random decay models

  15. The Management of the Citizen Oriented Applications

    OpenAIRE

    Ion IVAN; Bogdan VINTILĂ

    2010-01-01

    The context of the knowledge based society is presented. The new user requirements in the context of the new society are analyzed. Basic concepts regarding the citizen oriented applications are presented. Issues specific to the citizen oriented applications are presented. The development cycle of the citizen oriented applications is analyzed. The particular elements for developing citizen oriented applications are described. The quality concept for the citizen oriented applications is defined...

  16. Diversity-oriented peptide stapling

    DEFF Research Database (Denmark)

    Tran, Thu Phuong; Larsen, Christian Ørnbøl; Røndbjerg, Tobias

    2017-01-01

    as a powerful method for peptide stapling. However, to date CuAAC stapling has not provided a simple method for obtaining peptides that are easily diversified further. In the present study, we report a new diversity-oriented peptide stapling (DOPS) methodology based on CuAAC chemistry. Stapling of peptides...

  17. Object-Oriented Type Inference

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    1991-01-01

    We present a new approach to inferring types in untyped object-oriented programs with inheritance, assignments, and late binding. It guarantees that all messages are understood, annotates the program with type information, allows polymorphic methods, and can be used as the basis of an op...

  18. Market Orientation and Organizational Performance

    Directory of Open Access Journals (Sweden)

    Chee-Hua Chin

    2013-11-01

    Full Text Available Orientation plays a vital role for organizations to compete to create sustainable competitive advantage. The objective of this study is to examine the relationship between market orientation (MO and organizational performance (OP with service quality (SQ as a moderator in the context of the hotel industry in Malaysia. MO and OP were conceptualized as three- and two-dimensional constructs, respectively, whereas SQ, which consists of two-dimensional constructs, namely, technical quality and functional quality, was used as a moderator. Data were gathered through a survey using a structured questionnaire with a sample of 187 executive-level employees employed in hotels rated three stars and above in Malaysia. SmartPLS 2.0 (M3 with path modeling and bootstrapping was used to examine the standard error of the estimate and t-values. The findings suggest that only competitor orientation dimension of MO was significantly related to OP, whereas customer orientation and inter-functional coordination were not related. Interestingly, SQ was found to have moderated the relationship between MO and performance of the hotels in Malaysia. SQ exists to fill in the gap between customers’ expectations and their perception of the service providers’ performance that further creates differentiation and competitive advantage, which enhance MO practices and ultimately lead to improvements in the firm’s performance. Implications of the findings, potential limitations of the study, and directions for future research are highlighted.

  19. Communication Apprehension and People Orientations.

    Science.gov (United States)

    Ambler, Bob

    Assuming that different programs for communication apprehensive/avoidant students attract different types of students according to their needs and apprehension types, a study examined the relationship between communication apprehension (CA) and general people orientations, as measured by the Personal Record of Communication Apprehension-24…

  20. Retention-Oriented Curricular Design

    Science.gov (United States)

    Milanovic, Ivana; Eppes, Tom A.; Girouard, Janice; Townsend, Lee

    2010-01-01

    This paper presents a retention-oriented approach to the educational value stream within the STEM undergraduate area. Faced with several strategic challenges and opportunities, a Flex Advantage Plan was developed to enhance the undergraduate engineering technology programs and better utilize the curricular flexibilities inherent in the current…

  1. Time orientation and construal level

    NARCIS (Netherlands)

    Beek, van Jannette; Handgraaf, Michel J.J.; Antonides, Gerrit

    2017-01-01

    Eating and exercising behaviour are both characterized by immediate and future consequences. Consequently, consideration of these consequences (i.e. time orientation) predicts eating and exercising behaviour. We investigate whether construal level acts as an underlying mechanism of these

  2. Particle detection from oriented nuclei

    International Nuclear Information System (INIS)

    Wouters, J.; Moor, P. de; Schuurmans, P.; Severijns, N.; Vanderpoorten, W.; Vanneste, L.

    1992-01-01

    A survey is given of particle emission from nuclei that have been spin oriented by cryogenical means. Experiments and recent developments with detectors in the low temperature environment and their on-line application are reviewed. The most recent results are mentioned. Some phenomena to be unraveled in future studies are pointed out. (orig.)

  3. Political Orientations, Intelligence and Education

    Science.gov (United States)

    Rindermann, Heiner; Flores-Mendoza, Carmen; Woodley, Michael A.

    2012-01-01

    The social sciences have traditionally assumed that education is a major determinant of citizens' political orientations and behavior. Several studies have also shown that intelligence has an impact. According to a theory that conceptualizes intelligence as a "burgher" (middle-class, civil) phenomenon--intelligence should promote civil…

  4. Strategy, market orientation and performance

    DEFF Research Database (Denmark)

    Ormrod, R.P.; Zaefarian, Ghasem; Henneberg, Stephan C.

    2014-01-01

    This paper investigates the fit between the strategic posture of a political party and its political market orientation, and analyses the impact of this fit on party performance. For this purpose, a configuration theory logic is applied to the context of the political market; in particular, we de...

  5. Sexual orientation, prejudice and segregation

    NARCIS (Netherlands)

    Plug, E.; Webbink, D.; Martin, N.

    2014-01-01

    This article examines whether gay and lesbian workers sort into tolerant occupations. With information on sexual orientation, prejudice, and occupational choice taken from Australian Twin Registers, we find that gays and lesbians shy away from prejudiced occupations. We show that our segregation

  6. Context-Oriented Language Engineering

    NARCIS (Netherlands)

    T. van der Storm (Tijs)

    2017-01-01

    textabstractContext-oriented programming (COP) facilitates creating software that can dynamically adapt to its environment, such as device, user preferences, sensor inputs and so on. Software language engineering (SLE) is the discipline of principled methods and techniques for creating software

  7. Dimensionality of Women's Career Orientation.

    Science.gov (United States)

    Marshall, Sandra J.; Wijting, Jan P.

    1982-01-01

    Factor analysis of data from two samples identified nine indices of women's career orientation. Two factors accounted for significant variance common to the indices: career centeredness, which reflects the importance attached to a career relative to other life activities, and career commitment, which implies a commitment to lifetime employment.…

  8. Young people and sexual orientation

    NARCIS (Netherlands)

    Lisette Kuyper

    2015-01-01

    Original title: Young people and sexual orientation The Netherlands Institute for Social Research ¦ SCP carries out regular research on lesbian, gay, bisexual and transgender (LGBT) individuals. In this report, the focus is on young people in the Netherlands. The report addresses two issues:

  9. Object Oriented Programming in Director

    Directory of Open Access Journals (Sweden)

    Marian DARDALA

    2006-01-01

    Full Text Available Director is one of the most popular authoring software. As software for developing multimedia applications, Director is an object oriented programming environment. A very important issue to develop multimedia applications is the designing of their own classes. This paper presents the particular aspects concerning the available facilities offered by Lingo to design classes and to generate objects.

  10. Properties of horizontally oriented ice crystals observed by polarization lidar over summit, Greenland

    Directory of Open Access Journals (Sweden)

    Neely Ryan R.

    2018-01-01

    Full Text Available A source of error in microphysical retrievals and model simulations is the assumption that clouds are composed of only randomly oriented ice crystals. This assumption is frequently not true, as evidenced by optical phenomena such as parhelia. Here, observations from the Cloud, Aerosol and Polarization Backscatter Lidar at Summit, Greenland are utilized along with other sensors and beam imaging to examine the properties of horizontally oriented ice crystals and the environment conditions in which they occur.

  11. Dual-task results and the lateralization of spatial orientation: artifact of test selection?

    Science.gov (United States)

    Bowers, C A; Milham, L M; Price, C

    1998-01-01

    An investigation was conducted to identify the degree to which results regarding the lateralization of spatial orientation among men and women are artifacts of test selection. A dual-task design was used to study possible lateralization differences, providing baseline and dual-task measures of spatial-orientation performance, right- and left-hand tapping, and vocalization of "cat, dog, horse." The Guilford-Zimmerman Test (Guilford & Zimmerman, 1953), the Eliot-Price Test (Eliot & Price, 1976), and the Stumpf-Fay Cube Perspectives Test (Stumpf & Fay, 1983) were the three spatial-orientation tests used to investigate possible artifacts of test selection. Twenty-eight right-handed male and 39 right-handed female undergraduates completed random baseline and dual-task sessions. Analyses indicated no significant sex-related differences in spatial-orientation ability for all three tests. Furthermore, there was no evidence of differential lateralization of spatial orientation between the sexes.

  12. Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, Faiz, E-mail: faizahmad@petronas.com.my; Aslam, Muhammad, E-mail: klaira73@gmail.com; Altaf, Khurram, E-mail: khurram.altaf@petronas.com.my; Shirazi, Irfan, E-mail: irfanshirazi@hotmail.com [Mechanical Engineering Universiti Teknologi PETRONAS Malaysia (Malaysia)

    2015-07-22

    Fiber orientations in metal matrix composites have significant effect on improving tensile properties. Control of fiber orientations in metal injection molded metal composites is a difficult task. In this study, two mold cavities of dimensions 6x6x90 mm and 10x20x180 mm were used for comparison of fiber orientation in injection molded metal composites test parts. In both mold cavities, convergent and divergent flows were developed by modifying the sprue dimensions. Scanning electron microscope (SEM) was used to examine the fiber orientations within the test samples. The results showed highly aligned fiber in injection molded test bars developed from the convergent melt flow. Random orientation of fibers was noted in the composites test bars produced from divergent melt flow.

  13. Large diffusion anisotropy and orientation sorting of phosphorene nanoflakes under a temperature gradient.

    Science.gov (United States)

    Cheng, Yuan; Zhang, Gang; Zhang, Yingyan; Chang, Tienchong; Pei, Qing-Xiang; Cai, Yongqing; Zhang, Yong-Wei

    2018-01-25

    We perform molecular dynamics simulations to investigate the motion of phosphorene nanoflakes on a large graphene substrate under a thermal gradient. It is found that the atomic interaction between the graphene substrate and the phosphorene nanoflake generates distinct rates of motion for phosphorene nanoflakes with different orientations. Remarkably, for square phosphorene nanoflakes, the motion of zigzag-oriented nanoflakes is 2-fold faster than those of armchair-oriented and randomly-oriented nanoflakes. This large diffusion anisotropy suggests that sorting of phosphorene nanoflakes into specific orientations can be realized by a temperature gradient. The findings here provide interesting insights into strong molecular diffusion anisotropy and offer a novel route for manipulating two-dimensional materials.

  14. Topics in random walks in random environment

    International Nuclear Information System (INIS)

    Sznitman, A.-S.

    2004-01-01

    Over the last twenty-five years random motions in random media have been intensively investigated and some new general methods and paradigms have by now emerged. Random walks in random environment constitute one of the canonical models of the field. However in dimension bigger than one they are still poorly understood and many of the basic issues remain to this day unresolved. The present series of lectures attempt to give an account of the progresses which have been made over the last few years, especially in the study of multi-dimensional random walks in random environment with ballistic behavior. (author)

  15. What predicts recovery orientation in county departments of mental health? A pilot study.

    Science.gov (United States)

    Brown, Timothy T; Mahoney, Christine B; Adams, Neal; Felton, Mistique; Pareja, Candy

    2010-09-01

    In this pilot study we examined the determinants of recovery orientation among employees and influential stakeholders in a sample of 12 county departments of mental health in California. A two-level hierarchical linear model with random intercepts was estimated. Analyses show that recovery orientation has a U-shaped relationship with the age of staff/influential stakeholders and is negatively related to the difference between the desired level of adhocracy and the current level of adhocracy. Recovery orientation is positively related to the education level of staff/influential stakeholders, satisfying transformational leadership outcomes, and larger mental health budgets per capita. Policy implications are discussed.

  16. Crystal orientation dependent thermoelectric properties of highly oriented aluminum-doped zinc oxide thin films

    KAUST Repository

    Abutaha, Anas I.; Sarath Kumar, S. R.; Alshareef, Husam N.

    2013-01-01

    We demonstrate that the thermoelectric properties of highly oriented Al-doped zinc oxide (AZO) thin films can be improved by controlling their crystal orientation. The crystal orientation of the AZO films was changed by changing the temperature

  17. Organizing for Customer and Competitor Orientation

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Slater, Stanley F.

    2007-01-01

    The purpose of this study is to investigate the role of structural liaison devices, specialization, the presence of a marketing function, and competitive intensity as antecedents to firms' customer and competitor orientation. Results based on a sample of 99 medium-sized (50-250 employees......) manufacturing firms indicate, that while specialization and liaison devices facilitate customer orientation only liaison devices facilitate competitor orientation. Competitive intensity has no effects on customer orientation but influence competitor orientation. The results also indicate that the presence...... of a marketing function has no influence on the level of firms' customer and competitor orientation....

  18. Micro-orientation control of silicon polymer thin films on graphite surfaces modified by heteroatom doping

    Energy Technology Data Exchange (ETDEWEB)

    Shimoyama, Iwao, E-mail: shimoyama.iwao@jaea.go.jp [Material Science Research Center, Atomic Energy Agency, Tokai-mura 2-4, Naka-gun, Ibaraki 319-1195 (Japan); Baba, Yuji [Fukushima Administrative Department, Atomic Energy Agency, Tokai-mura 2-4, Naka-gun, Ibaraki 319-1195 (Japan); Hirao, Norie [Material Science Research Center, Atomic Energy Agency, Tokai-mura 2-4, Naka-gun, Ibaraki 319-1195 (Japan)

    2017-05-31

    Highlights: • Micro-orientation control method for organic polysilane thin films is proposed. • This method utilizes surface modification of graphite using heteroatom doping. • Lying, standing, and random orientations can be freely controlled by this method. • Micro-pattering of a polysilane film with controlled orientations is achieved. - Abstract: Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy is applied to study orientation structures of polydimethylsilane (PDMS) films deposited on heteroatom-doped graphite substrates prepared by ion beam doping. The Si K-edge NEXAFS spectra of PDMS show opposite trends of polarization dependence for non irradiated and N{sub 2}{sup +}-irradiated substrates, and show no polarization dependence for an Ar{sup +}-irradiated substrate. Based on a theoretical interpretation of the NEXAFS spectra via first-principles calculations, we clarify that PDMS films have lying, standing, and random orientations on the non irradiated, N{sub 2}{sup +}-irradiated, and Ar{sup +}-irradiated substrates, respectively. Furthermore, photoemission electron microscopy indicates that the orientation of a PDMS film can be controlled with microstructures on the order of μm by separating irradiated and non irradiated areas on the graphite surface. These results suggest that surface modification of graphite using ion beam doping is useful for micro-orientation control of organic thin films.

  19. Market Orientation Capabilities: A Study of Learning Processes in Market-Oriented Companies

    OpenAIRE

    Silkoset, Ragnhild

    2009-01-01

    The literature operates with three perspectives on market orientation. These include market orientation as behavior (Kohli and Jaworski 1990; Narver and Slater 1990), market orientation as a unique resource (Hunt and Morgan 1995) and market orientation as a dynamic learning capability (Sinkula 1994; Day 1994b). A company's level of market orientation will vary with regard to the perspectives, including factors affecting a company’s degree of market orientation and the effect...

  20. Role-Oriented Enterprise Systems

    DEFF Research Database (Denmark)

    Holst, Philip; Beringer, Joerg; Winther, Jacob

    This paper examines the concept of role-­oriented enterprise systems by investigating motivations for and approaches to constructing and reflecting predefined organizational roles in user interfaces of packaged enterprise systems. The research is conducted as case studies of Microsoft and SAP......, constructed from interviews, documents, and examples of role-­‐oriented enterprise system packages from both vendors. The research indicates that the primary motivation of the vendors for including predefined roles is to complement a function-­‐centric approach with a user-­‐centric approach to the design...... of user interfaces of enterprise systems. The research furthermore identifies strategies of an embedded and an independent approach to modeling the role concept and a unified and a componentized approach to reflecting role aggregation in user interfaces....

  1. Organizational search and market orientation

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Stieglitz, Nils

    2008-01-01

      Market orientation has evolved into a key construct in the marketing and strategy literature. While much progress has been made in empirical research, the concept lacks a coherent theoretical foundation. Essentially, much prior research has pointed to the role of market-sensing capabilities...... to explain performance differentials among firms (Day, 1994). We open up the black box of market-sensing capabilities by treating the issue of choosing marketing attributes of products as a problem of organizational search. Despite much robust research on organizational search in the strategy......, with their effectiveness depending on organizational and environmental factors. We provide an elaborate outline of the multidimensional aspect of firms' responsive and proactive search processes. First, we highlight the role of organizational aspiration-levels for market orientation. We then investigate the mechanisms...

  2. Constituency Orientation in Irish Politics

    DEFF Research Database (Denmark)

    Kusche, Isabel

    2017-01-01

    The constituency orientation of Irish politicians is a recurring topic in Irish political science. Its analysis has predominantly focused on TDs. This article uses a content analysis of candidate video statements in the general election 2016 in order to assess the strength of constituency...... this pattern, indicated by the weak constituency orientation in Dublin and Cork constituencies. Results also indicate differences between parties and some political statuses, while the gender of the candidates is of no relevance. Although the material does not permit a clear distinction between effects...... of political culture and short-term considerations, taken together the results indicate that localism in Irish politics matters, but in more complicated ways than usually depicted....

  3. Exploring object-oriented technologies

    CERN Multimedia

    2000-01-01

    Object oriented technologies are the corner stone of modern software development. A piece of software is today conceived, constructed and tested as a set of objects interacting with each other, rather than as a large sequential program. OO is present throughout the whole software life cycle allowing for maintainable code re-use, clean design and manageable complexity. OO is also the seed upon which other technologies are being built and deployed, such as distributed computing, component models, open interoperability, etc.This series of three seminars will provide a pragmatic overview on the main ideas behind OO software development and will explain the inner workings of the most outstanding technologies being built on OO, such as UML, CORBA, Component Models, Agent Oriented Computing, Business Objects, etc.

  4. Orientalism and Heart of Darkness

    Institute of Scientific and Technical Information of China (English)

    赵艳

    2012-01-01

      Heart of Darkness was written by Joseph Conrad and published as a whole in 1902. The story begins on a British ship“the Nellie”moored on the coast of the Thames. It mainly talks about what Marlow sees and thinks when he begins his journey up to the Congo Riveres and reveals a turning process of a white colonizer called Kurts who is at the very beginning, an idealistic white colonizer trying to bring“civilization”and“progress”to the Africa but in the end falls into a greedy, cruel person. The novel, on the one hand, describes the terrible life of African peple and reveals the tyranne, greed of western colo⁃nism and stong racism; and on the other hand, it also shows readers a strong orientalism towards the Africa. So my purpose of the paper is to analyse how Orientalism is revealed in the Heart of Darkness.

  5. Protonic decay of oriented nuclei

    International Nuclear Information System (INIS)

    Kadmensky, S.G.

    2002-01-01

    On the basis of the multiparticle theory of protonic decay, the angular distributions of protons emitted by oriented spherical and deformed nuclei in the laboratory frame and in the internal coordinate frame of deformed parent nuclei are constructed with allowance for symmetry with respect to time inversion. It is shown that, because of the deep-subbarrier character of protonic decay, the adiabatic approximation is not applicable to describing the angular distributions of protons emitted by oriented deformed nuclei and that the angular distribution of protons in the laboratory frame does not coincide with that in the internal coordinate frame. It is demonstrated that these angular distributions coincide only if the adiabatic and the semiclassical approximation are simultaneously valid

  6. Apparatus for orientating cylindrical articles

    International Nuclear Information System (INIS)

    Lauder, D.R.; Bailey, A.

    1984-01-01

    First and second chambers, each having a rotor, are interconnected by a passage. The first chamber has a contoured periphery to receive articles and the passage is shaped and dimensioned to permit travel therealong only of those articles which are orientated in the first chamber with their longitudinal axes either in the direction of travel or normal to the direction of travel. Articles in other orientations are carried round the first chamber by the rotor for representation at the passage. The rotor in the second chamber permits the passage of those articles which have their longitudinal axes in the direction of travel and topples by means of blades, the articles having their axes normal to the direction of travel into positions in which the axes are in the direction of travel. (author)

  7. Nuclear orientation and nuclear structure

    International Nuclear Information System (INIS)

    Krane, K.S.

    1988-01-01

    The present generation of on-line nuclear orientation facilities promises to revolutionize the gathering of nuclear structure information, especially for the hitherto poorly known and understood nuclei far from stability. Following a brief review of the technological developments that have facilitated these experiments, the nuclear spectroscopic information that can be obtained is summarized. Applications to understanding nuclear structure are reviewed, and challenges for future studies are discussed. (orig.)

  8. Architecting Service-Oriented Systems

    Science.gov (United States)

    2011-08-01

    Abstract Service orientation is an approach to software systems development that has become a popular way to implement distributed, loosely coupled...runtime. The later you defer binding the more flexibility service providers and service consumers have to develop their software systems independently...Enterprise Service Bus An Enterprise Service Bus (ESB) is a software pattern that can be part of a SOA infrastructure and acts as an intermediary

  9. Consumer oriented new product development

    DEFF Research Database (Denmark)

    van Trijp, Hans C.M.; Grunert, Klaus G

    2014-01-01

    New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

  10. Mastering object-oriented Python

    CERN Document Server

    Lott, Steven F

    2014-01-01

    This book follows a standard tutorial approach with approximately 750 code samples spread through the 19 chapters. This amounts to over 5,900 lines of code that illustrate each concept.This book is aimed at programmers who have already learned the basics of object-oriented Python and need to write more sophisticated, flexible code that integrates seamlessly with the rest of Python. This book assumes a computer science background, with experience of common Python design patterns.

  11. Sexual Orientation, Controversy, and Science.

    Science.gov (United States)

    Bailey, J Michael; Vasey, Paul L; Diamond, Lisa M; Breedlove, S Marc; Vilain, Eric; Epprecht, Marc

    2016-09-01

    SummaryOngoing political controversies around the world exemplify a long-standing and widespread preoccupation with the acceptability of homosexuality. Nonheterosexual people have seen dramatic surges both in their rights and in positive public opinion in many Western countries. In contrast, in much of Africa, the Middle East, the Caribbean, Oceania, and parts of Asia, homosexual behavior remains illegal and severely punishable, with some countries retaining the death penalty for it. Political controversies about sexual orientation have often overlapped with scientific controversies. That is, participants on both sides of the sociopolitical debates have tended to believe that scientific findings-and scientific truths-about sexual orientation matter a great deal in making political decisions. The most contentious scientific issues have concerned the causes of sexual orientation-that is, why are some people heterosexual, others bisexual, and others homosexual? The actual relevance of these issues to social, political, and ethical decisions is often poorly justified, however. © The Author(s) 2016.

  12. Distinct crystallinity and orientations of hydroxyapatite thin films deposited on C- and A-plane sapphire substrates

    Science.gov (United States)

    Akazawa, Housei; Ueno, Yuko

    2014-10-01

    We report how the crystallinity and orientation of hydroxyapatite (HAp) films deposited on sapphire substrates depend on the crystallographic planes. Both solid-phase crystallization of amorphous HAp films and crystallization during sputter deposition at elevated temperatures were examined. The low-temperature epitaxial phase on C-plane sapphire substrates has c-axis orientated HAp crystals regardless of the crystallization route, whereas the preferred orientation switches to the (310) direction at higher temperatures. Only the symmetric stretching mode (ν1) of PO43- units appears in the Raman scattering spectra, confirming well-ordered crystalline domains. In contrast, HAp crystals grown on A-plane sapphire substrates are always oriented toward random orientations. Exhibiting all vibrational modes (ν1, ν3, and ν4) of PO43- units in the Raman scattering spectra reflects random orientation, violating the Raman selection rule. If we assume that Raman intensities of PO43- units represent the crystallinity of HAp films, crystallization terminating the surface with the C-plane is hindered by the presence of excess H2O and OH species in the film, whereas crystallization at random orientations on the A-plane sapphire is rather promoted by these species. Such contrasting behaviors between C-plane and A-plane substrates will reflect surface-plane dependent creation of crystalline seeds and eventually determine the orientation of resulting HAp films.

  13. [Customer orientation in ambulant medicine].

    Science.gov (United States)

    Heinrich, M

    2014-07-01

    Due to developments of the health market, economic aspects of the health system are more relevant. In this upcoming market the patient is regarded as customer and the doctor as provider of medical services. Studies on customer orientation in the ambulant medicine lag behind this dynamic. An aim of the study is to comprehend the attitudes of the doctors referring to the customer orientation. In a second step the findings are discussed according to statements of health-care paticipants. Developments in role comprehension of doctor and patient are focused to gain results in scientific and practical applications. Guideline-supported, partly narrative interviews with n=9 gynaecologists and n=11 general practitioners in Freiburg/Germany are recorded, transcribed and reviewed in a qualitative analysis. The statements of the doctors show patient satisfaction has an incremental meaning sspecially regarding the sequence of patient relationship and economic management of the doctor's workplace. The doctor's role comprehension meets with a refusal of the role of salesman and the patient as customer. The method of interviews is suitable to gather empirical impressions of the doctors. The control sample is adequate, however a bias due to inhomogeneous thematic affinitiy and local social-demographics might be possible. The customer orientation has become an important factor in doctor-patient relationtships. The relevance of the doctor-patient conversation and the risk of misuse of the patient confidence are mentioned by the doctors. The doctor as paternalistic care provider gives way to the customer-focused service provider. The doctor's necessity of autonomyssss and dependency on patient satisfaction have potential for conflict. Intensive mention of customer orientation in medicine in the media emphasises its importance. Rational handling with the possibilities of individual health markets is a prospective challange. Further research could be established in all aspects of

  14. Why competitors matter for market orientation

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe

    2009-01-01

      Purpose - This paper investigates whether it is meaningful to decompose market orientation into customer orientation and competitor orientation and what possible implications this decomposition may have for researchers and business practitioners.   Design - Through a review of existing market...... orientation research, two of its salient dimensions, customer orientation and competitor orientation, are theoretically investigated. Then, two symmetric component measures are developed and tested on 308 manufacturing firms in a cross-sectional questionnaire survey, supplemented with census data.   Findings...... - Empirical evidence reveals that, while competitor orientation is positively related to a firm's market share, a customer orientation is detrimental to a firm's return on assets for firms in less competitive environments.   Research implications and limitations - The study advocates moving beyond ‘global...

  15. Why competitors matter for market orientation

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe

    2009-01-01

    and empirically tests two novel symmetric component measures of customer orientation and competitor orientation. Academicians are provided with insights with respect to the content and symmetry of component measures of the market orientation construct and their relation to firm performance. Furthermore, business......  Purpose - This paper investigates whether it is meaningful to decompose market orientation into customer orientation and competitor orientation and what possible implications this decomposition may have for researchers and business practitioners.   Design - Through a review of existing market...... - Empirical evidence reveals that, while competitor orientation is positively related to a firm's market share, a customer orientation is detrimental to a firm's return on assets for firms in less competitive environments.   Research implications and limitations - The study advocates moving beyond ‘global...

  16. Black Curriculum Orientations: A Preliminary Inquiry.

    Science.gov (United States)

    Watkins, William H.

    1993-01-01

    Six curriculum orientations predominate in African-American educational experience: functionalism, accommodation, liberalism, Black Nationalism, Afrocentrism, and social reconstruction. Tied to the history of slavery and oppression, these orientations will continue to develop separate from the mainstream. (SK)

  17. Characteristics of leadership-oriented women

    OpenAIRE

    Htun, Tin Tin; Yamamoto, Mariko

    2001-01-01

    The present study explores within-gender differences between high leadership-oriented women and low leadership-oriented women regarding their characteristics and attitudes. One hundred and ninety-two Japanese ...

  18. Cell orientation gradients on an inverse opal substrate.

    Science.gov (United States)

    Lu, Jie; Zou, Xin; Zhao, Ze; Mu, Zhongde; Zhao, Yuanjin; Gu, Zhongze

    2015-05-20

    The generation of cell gradients is critical for understanding many biological systems and realizing the unique functionality of many implanted biomaterials. However, most previous work can only control the gradient of cell density and this has no effect on the gradient of cell orientation, which has an important role in regulating the functions of many connecting tissues. Here, we report on a simple stretched inverse opal substrate for establishing desired cell orientation gradients. It was demonstrated that tendon fibroblasts on the stretched inverse opal gradient showed a corresponding alignment along with the elongation gradient of the substrate. This "random-to-aligned" cell gradient reproduces the insertion part of many connecting tissues, and thus, will have important applications in tissue engineering.

  19. 3D Representative Volume Element Reconstruction of Fiber Composites via Orientation Tensor and Substructure Features

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yi; Chen, Wei; Xu, Hongyi; Jin, Xuejun

    2016-01-01

    To provide a seamless integration of manufacturing processing simulation and fiber microstructure modeling, two new stochastic 3D microstructure reconstruction methods are proposed for two types of random fiber composites: random short fiber composites, and Sheet Molding Compounds (SMC) chopped fiber composites. A Random Sequential Adsorption (RSA) algorithm is first developed to embed statistical orientation information into 3D RVE reconstruction of random short fiber composites. For the SMC composites, an optimized Voronoi diagram based approach is developed for capturing the substructure features of SMC chopped fiber composites. The proposed methods are distinguished from other reconstruction works by providing a way of integrating statistical information (fiber orientation tensor) obtained from material processing simulation, as well as capturing the multiscale substructures of the SMC composites.

  20. How does firm performance influence market orientation?

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Stieglitz, Nils

    This paper contributes by investigating how firm performance influences its market orientation. We draw on the aspiration-level model from the behavioral theory of the firm to develop testable propositions that substantiate and extend prior market orientation research. Specifically, we address how...... performance influences firms' market-oriented search behavior (responsive or proactive) and the allocation of attention (customer and competitor orientation) as well as the formation of aspiration levels. Research and managerial implications are discussed....

  1. The Development of Citizen Oriented Informatics

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2010-01-01

    Full Text Available We define the concept of citizen-oriented computer application. Quality characteristics are set for computer applications developed in the conditions of citizen-oriented computing and outline the development cycle for these applications. It defines the conditions of existence for citizen-oriented applications. Average and long-term strategies are elaborated.

  2. The impact of interference on short-term memory for visual orientation.

    Science.gov (United States)

    Rademaker, Rosanne L; Bloem, Ilona M; De Weerd, Peter; Sack, Alexander T

    2015-12-01

    Visual short-term memory serves as an efficient buffer for maintaining no longer directly accessible information. How robust are visual memories against interference? Memory for simple visual features has proven vulnerable to distractors containing conflicting information along the relevant stimulus dimension, leading to the idea that interacting feature-specific channels at an early stage of visual processing support memory for simple visual features. Here we showed that memory for a single randomly orientated grating was susceptible to interference from a to-be-ignored distractor grating presented midway through a 3-s delay period. Memory for the initially presented orientation became noisier when it differed from the distractor orientation, and response distributions were shifted toward the distractor orientation (by ∼3°). Interestingly, when the distractor was rendered task-relevant by making it a second memory target, memory for both retained orientations showed reduced reliability as a function of increased orientation differences between them. However, the degree to which responses to the first grating shifted toward the orientation of the task-relevant second grating was much reduced. Finally, using a dichoptic display, we demonstrated that these systematic biases caused by a consciously perceived distractor disappeared once the distractor was presented outside of participants' awareness. Together, our results show that visual short-term memory for orientation can be systematically biased by interfering information that is consciously perceived. (c) 2015 APA, all rights reserved).

  3. Factors associated with students' orientations to nursing.

    Science.gov (United States)

    Vanhanen, L; Janhonen, S

    2000-05-01

    Factors associated with students' orientations to nursing This paper presents the results of a study focusing on the factors associated with orientations to nursing. Students' orientations to nursing have not as yet been a focus of nursing research. In some other professions, however, professional orientation has been associated with learning motivation and study performance, and has been seen as a predictor of work satisfaction. In this study, students' orientations to nursing were defined in terms of caring, nursing expertise and life orientation. The hypothesis of whether students' pre-educational experiences of nursing, gender, choice of nursing specialty, problems with nursing studies and intention to stay in nursing were associated with different orientations was tested. The extent to which students were orientated to caring, nursing expertise and their own life was also examined. The orientation to nursing measurement tool, which has been developed on the basis of a qualitative study, was used to collect the data. Nurse teachers collected the data from nursing students (n=184) who were studying in three different nursing programmes in Finland. Non-parametric assessments (Mann-Whitney U-test and Kruskal-Wallis test) of the differences between the students' orientations were carried out. A majority of the students were highly life-orientated, and two-thirds had average nursing expertise or caring orientation scores. The results supported the study hypothesis of an association between students' orientations and their gender, choice of nursing speciality, problems with nursing studies and intention to stay in nursing. However, the hypothesis of an association between students' pre-educational nursing experiences and orientation to nursing was not supported. The contradictions between students' orientation to nursing and the philosophy of nursing underlying the study programme may be a source of motivational problems and dissatisfaction with nursing education

  4. Pressure Safety Orientation Live #769

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-17

    Pressure Safety Orientation (course #769) introduces workers at Los Alamos National Laboratory (LANL) to the Laboratory Pressure Safety Program and to pressure-related hazards. This course also affords a hands-on exercise involving the assembly of a simple pressure system. This course is required for all LANL personnel who work on or near pressure systems and are exposed to pressure-related hazards. These personnel include pressure-system engineers, designers, fabricators, installers, operators, inspectors, maintainers, and others who work with pressurized fluids and may be exposed to pressure-related hazards.

  5. On-line nuclear orientation

    International Nuclear Information System (INIS)

    Krane, K.S.

    1990-01-01

    This grant has as its overall goal the pursuit of on-line nuclear orientation experiments for the purpose of eliciting details of nuclear structure from the decays of neutron-deficient nuclei, such as those produced by the Holifield Heavy-Ion Research Facility at Oak Ridge and extracted by the UNISOR Isotope Separator. This paper discusses: refrigerator development; the decay of 184 Au; the decay of 191 Hg to 191 Au; the decay of 189 Pt to 189 Ir; the decays of 109,111 Pd; the decay of 172 Er; and solid angle corrections

  6. Orientational epitaxy in adsorbed monolayers

    International Nuclear Information System (INIS)

    Novaco, A.D.; McTague, J.P.

    1977-01-01

    The ground state for adsorbed monolayers on crystalline substrates is shown to involve a definite relative orientation of the substrate and adsorbate crystal axes, even when the relative lattice parameters are incommensurate. The rotation angle which defines the structure of the monolayer-substrate system is determined by the competition between adsorbate-substrate and adsorbate-adsorbate energy terms, and is generally not a symmetry angle. Numerical predictions are presented for the rare gas-graphite systems, whose interaction potentials are rather well known. Recent LEED data for some of these systems appear to corroborate these predictions

  7. Objective - oriented financial analysis introduction

    Directory of Open Access Journals (Sweden)

    Dessislava Kostova – Pickett

    2018-02-01

    Full Text Available The practice of financial analysis has been immeasurably strengthened in recent years thanks to the ongoing evolution of computerized approaches in the form of spreadsheets and computer-based financial models of different types. These devices not only relieved the analyst's computing task, but also opened up a wide range of analyzes and research into alternative sensitivity, which so far has not been possible. The main potential for object-oriented financial analysis consists in enormously expanding the analyst's capabilities through an online knowledge and information interface that has not yet been achieved through existing methods and software packages.

  8. Problem-oriented project studies

    DEFF Research Database (Denmark)

    Nielsen, Jørgen Lerche; Danielsen, Oluf

    2010-01-01

    and marking papers / essays is complemented and in some way overruled by a new role as supervisor and facilitator for the group of students working with a research problem, they themselves have picked. However different dimensions of this new teacher role can be seen – from expert in an academic field (result......-oriented focusing on how the final product demonstrates the students’ ‘correct’ way to handle the academic aspects of the subject in mind) to a role more focusing on processes, methodological dimensions and stressing the importance of a reflexive approach. Some teachers may even tend to take on a role...

  9. Object oriented JavaScript

    CERN Document Server

    Stefanov, Stoyan

    2013-01-01

    You will first be introduced to object-oriented programming, then to the basics of objects in JavaScript. This book takes a do-it-yourself approach when it comes to writing code, because the best way to really learn a programming language is by writing code. You are encouraged to type code into Firebug's console, see how it works and then tweak it and play around with it. There are practice questions at the end of each chapter to help you review what you have learned.For new to intermediate JavaScript developer who wants to prepare themselves for web development problems solved by smart JavaSc

  10. 3D DIRECTIONAL MATHEMATICAL MORPHOLOGY FOR ANALYSIS OF FIBER ORIENTATIONS

    Directory of Open Access Journals (Sweden)

    Hellen Altendorf

    2011-05-01

    Full Text Available In this paper we present algorithms for measuring local characteristics of random fiber systems. The calculation of the local directions and radii is based on directional distance transforms and evaluation of the inertia moments and axes of the resulting extremities of the centralized, directed chords. The method provides continuous results while minimizing the runtime by using few sampled directions. Furthermore several steps of improvement for the computation of orientation and radius information are presented. The algorithms are evaluated using synthetic data and applied to images of realmicrostructures obtained by computer tomography.

  11. Production and Reliability Oriented SOFC Cell and Stack Design

    DEFF Research Database (Denmark)

    Hauth, Martin; Lawlor, Vincent; Cartellieri, Peter

    2017-01-01

    The paper presents an innovative development methodology for a production and reliability oriented SOFC cell and stack design aiming at improving the stacks robustness, manufacturability, efficiency and cost. Multi-physics models allowed a probabilistic approach to consider statistical variations...... in production, material and operating parameters for the optimization phase. A methodology for 3D description of spatial distribution of material properties based on a random field models was developed and validated by experiments. Homogenized material models on multiple levels of the SOFC stack were...... and output parameters and to perform a sensitivity analysis were developed and implemented. The capabilities of the methodology is illustrated on two practical cases....

  12. Oriented Shape Index Histograms for Cell Classification

    DEFF Research Database (Denmark)

    Larsen, Anders Boesen Lindbo; Dahl, Anders Bjorholm; Larsen, Rasmus

    2015-01-01

    We propose a novel extension to the shape index histogram feature descriptor where the orientation of the second-order curvature is included in the histograms. The orientation of the shape index is reminiscent but not equal to gradient orientation which is widely used for feature description. We...... evaluate our new feature descriptor using a public dataset consisting of HEp-2 cell images from indirect immunoflourescence lighting. Our results show that we can improve classification performance significantly when including the shape index orientation. Notably, we show that shape index orientation...

  13. Column-oriented database management systems

    OpenAIRE

    Možina, David

    2013-01-01

    In the following thesis I will present column-oriented database. Among other things, I will answer on a question why there is a need for a column-oriented database. In recent years there have been a lot of attention regarding a column-oriented database, even if the existence of a columnar database management systems dates back in the early seventies of the last century. I will compare both systems for a database management – a colum-oriented database system and a row-oriented database system ...

  14. Characterization of highly (110)- and (111)-oriented Pb(Zr,Ti)O3 films on BaPbO3 electrode using Ru conducting barrier

    International Nuclear Information System (INIS)

    Liang, C.-S.; Wu, J.-M.

    2005-01-01

    Highly non-(001)-oriented Pb(Zr,Ti)O 3 (PZT) films have been fabricated by rf-magnetron sputtering. The preferential (110)-oriented BaPbO 3 (BPO) deposited on Ru buffer layer induces the growth of (110)-oriented PZT film. With the aid of self-organized growth of PZT, the orientation of the film deposited on random-oriented BPO/Pt(111)/Ru(002) is (111)-preferred. The insertion of Pt layer between BPO and Ru changes the orientation of PZT from (110) to (111) and prevents the oxygen diffusion. These non-(001)-oriented PZT films possess more superior ferroelectric, fatigue, and retention properties than those of (001)-oriented PZT films

  15. TBV 361 RESOLUTION ANALYSIS: EMPLACEMENT DRIFT ORIENTATION

    International Nuclear Information System (INIS)

    Lin, M.; Kicker, D.C.; Sellers, M.D.

    1999-01-01

    The purpose of this To Be Verified/To Be Determined (TBX) resolution analysis is to release ''To Be Verified'' (TBV)-361 related to the emplacement drift orientation. The system design criterion in ''Subsurface Facility System Description Document'' (CRWMS M andO 1998a, p.9) specifies that the emplacement drift orientation relative to the dominant joint orientations should be at least 30 degrees. The specific objectives for this analysis include the following: (1) Collect and evaluate key block data developed for the repository host horizon rock mass. (2) Assess the dominant joint orientations based on available fracture data. (3) Document the maximum block size as a function of drift orientation. (4) Assess the applicability of the drift orientation/joint orientation offset criterion in the ''Subsurface Facility System Description Document'' (CRWMS M andO 1998a, p.9). (5) Consider the effects of seepage on drift orientation. (6) Verify that the viability assessment (VA) drift orientation complies with the drift orientation/joint orientation offset criterion, or provide justifications and make recommendations for modifying the VA emplacement drift layout. In addition to providing direct support to the System Description Document (SDD), the release of TBV-361 will provide support to the Repository Subsurface Design Department. The results from this activity may also provide data and information needs to support the MGR Requirements Department, the MGR Safety Assurance Department, and the Performance Assessment Organization

  16. Development of symptoms-oriented operating procedures

    International Nuclear Information System (INIS)

    Colquhoun, R.

    1984-01-01

    Until recently, the formal treatment of control room procedures for upset conditions in nuclear power plants has been event-oriented. This orientation was not so much a reflection of power plant operating practice as it was a reflection of design-oriented thinking - design-basis events, therefore event-oriented procedures. Event orientation is not common in other professions. In the medical profession, for example, the stabilization of vital functions through a symptoms-oriented approach has priority over diagnosis and prognosis. The American nuclear power industry has initiated programs for the development and application of a symptoms-oriented approach for handling upset conditions. Canadian programs have independently paralleled the US programs. This article describes the rationale and current applications of the Canadian programs and identifies the relevance of a generic symptoms-based emergency procedure to current operating practices

  17. The Service Orientation and Employee’s Customer Orientation in Public Services Organizations

    OpenAIRE

    Andrada Iacob

    2015-01-01

    This paper explores the relationships between service orientation and employees’ customer orientation in public services organizations. First, we will review the relevant literature on service orientation and employee’s customer orientation. Based on this theory, the research hypothesis is formulated. The research results will be followed by conclusions, limitations and future directions. At the construct level, we found positive direct relationships between service orientation and employees’...

  18. CLUB COURSE D'ORIENTATION

    CERN Multimedia

    CLUB COURSE D'ORIENTATION

    2010-01-01

    COURSE D’ORIENTATION    Automne 2010 : Quel programme!   Après une pause de deux mois, le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une nouvelle série de courses d’orientation pour cet automne. Ces courses ont lieu généralement le samedi entre 13h00 et 17h00. 5 circuits sont disponibles, ceci va du facile court (2 km) adapté aux débutants et aux enfants jusqu’au parcours technique long de 6 km pour les chevronnés en passant par les parcours facile moyen (4 km), technique court (3,5 km) ou technique moyen (4,5 km). Il y aura donc toujours un parcours à votre niveau. Un classement général est effectué pour vous motiver à persévérer ! Ces courses (ou promena...

  19. Tribological investigation of oriented HDPE.

    Science.gov (United States)

    Hoseini, Mohammed; Lausmaa, Jukka; Boldizar, Antal

    2002-09-15

    The possibility to control the wear properties of high-density polyethylene (HDPE) material at an early processing stage is explored. Wear measurements of cold roll-drawn HDPE with two different draw ratios were carried out for three sliding planes, each in two directions. The dependence of the wear properties on the degree and direction of orientation was investigated. The experiments were performed in a pin-on-disc machine in a dry environment. The tribo-couple consisted of HDPE plates versus a standardised diamond coated steel disc. The results show that the wear resistance of cold roll-drawn HDPE differ widely, by a factor up to 6, depending on the sliding direction relative to the drawing direction. The material has a significantly better wear resistance when the sliding direction was perpendicular to the processing direction. The best wear resistance was in the end plane and it was improved by a factor up to 3.6 when the draw ratio was increased from 2 to 4. These results indicate that molecular orientation by polymer processing is a promising method to improve the wear properties and decrease the wear debris production of HDPE. Copyright 2002 Wiley Periodicals, Inc.

  20. Phototactic orientation mechanism in the ciliate Fabrea salina, as inferred from numerical simulations.

    Science.gov (United States)

    Marangoni, R; Preosti, G; Colombetti, G

    2000-02-01

    The marine ciliate Fabrea salina shows a clear positive phototaxis, but the mechanism by which a single cell is able to detect the direction of light and orient its swimming accordingly is still unknown. A simple model of phototaxis is that of a biased random walk, where the bias due to light can affect one or more of the parameters that characterize a random walk, i.e., the mean speed, the frequency distribution of the angles of directional changes and the frequency of directional changes. Since experimental evidence has shown no effect of light on the mean speed of Fabrea salina, we have excluded models depending on this parameter. We have, therefore, investigated the phototactic orientation of Fabrea salina by computer simulation of two simple models, the first where light affects the frequency distribution of the angles of directional changes (model M1) and the second where the light bias modifies the frequency of directional changes (model M2). Simulated M1 cells directly orient their swimming towards the direction of light, regardless of their current swimming orientation; simulated M2 cells, on the contrary, are unable to actively orient their motion, but remain locked along the light direction once they find it by chance. The simulations show that these two orientation models lead to different macroscopic behaviours of the simulated cell populations. By comparing the results of the simulations with the experimental ones, we have found that the phototactic behaviour of real cells is more similar to that of the M2 model.

  1. Impact of Oriented Clay Particles on X-Ray Spectroscopy Analysis

    Science.gov (United States)

    Lim, A. J. M. S.; Syazwani, R. N.; Wijeyesekera, D. C.

    2016-07-01

    Understanding the engineering properties of the mineralogy and microfabic of clayey soils is very complex and thus very difficult for soil characterization. Micromechanics of soils recognize that the micro structure and mineralogy of clay have a significant influence on its engineering behaviour. To achieve a more reliable quantitative evaluation of clay mineralogy, a proper sample preparation technique for quantitative clay mineral analysis is necessary. This paper presents the quantitative evaluation of elemental analysis and chemical characterization of oriented and random oriented clay particles using X-ray spectroscopy. Three different types of clays namely marine clay, bentonite and kaolin clay were studied. The oriented samples were prepared by placing the dispersed clay in water and left to settle on porous ceramic tiles by applying a relatively weak suction through a vacuum pump. Images form a Scanning Electron Microscope (SEM) was also used to show the comparison between the orientation patterns of both the sample preparation techniques. From the quantitative analysis of the X-ray spectroscopy, oriented sampling method showed more accuracy in identifying mineral deposits, because it produced better peak intensity on the spectrum and more mineral content can be identified compared to randomly oriented samples.

  2. Three-dimensional pseudo-random number generator for implementing in hybrid computer systems

    International Nuclear Information System (INIS)

    Ivanov, M.A.; Vasil'ev, N.P.; Voronin, A.V.; Kravtsov, M.Yu.; Maksutov, A.A.; Spiridonov, A.A.; Khudyakova, V.I.; Chugunkov, I.V.

    2012-01-01

    The algorithm for generating pseudo-random numbers oriented to implementation by using hybrid computer systems is considered. The proposed solution is characterized by a high degree of parallel computing [ru

  3. Random broadcast on random geometric graphs

    Energy Technology Data Exchange (ETDEWEB)

    Bradonjic, Milan [Los Alamos National Laboratory; Elsasser, Robert [UNIV OF PADERBORN; Friedrich, Tobias [ICSI/BERKELEY; Sauerwald, Tomas [ICSI/BERKELEY

    2009-01-01

    In this work, we consider the random broadcast time on random geometric graphs (RGGs). The classic random broadcast model, also known as push algorithm, is defined as: starting with one informed node, in each succeeding round every informed node chooses one of its neighbors uniformly at random and informs it. We consider the random broadcast time on RGGs, when with high probability: (i) RGG is connected, (ii) when there exists the giant component in RGG. We show that the random broadcast time is bounded by {Omicron}({radical} n + diam(component)), where diam(component) is a diameter of the entire graph, or the giant component, for the regimes (i), or (ii), respectively. In other words, for both regimes, we derive the broadcast time to be {Theta}(diam(G)), which is asymptotically optimal.

  4. Quantumness, Randomness and Computability

    International Nuclear Information System (INIS)

    Solis, Aldo; Hirsch, Jorge G

    2015-01-01

    Randomness plays a central role in the quantum mechanical description of our interactions. We review the relationship between the violation of Bell inequalities, non signaling and randomness. We discuss the challenge in defining a random string, and show that algorithmic information theory provides a necessary condition for randomness using Borel normality. We close with a view on incomputablity and its implications in physics. (paper)

  5. Demographic influences on environmental value orientations and normative beliefs about national forest management

    Science.gov (United States)

    Jerry J. Vaske; Maureen P. Donnelly; Daniel R. Williams; Sandra Jonker

    2001-01-01

    Using the cognitive hierarchy as the theoretical foundation, this article examines the predictive influence of individuals' demographic characteristics on environmental value orientations and normative beliefs about national forest management. Data for this investigation were obtained from a random sample of Colorado residents (n = 960). As predicted by theory, a...

  6. Orientation correlations in metal structures from the micrometer to nanometer range

    DEFF Research Database (Denmark)

    Juul Jensen, D.; Bowen, Jacob R.; Mishin, Oleg

    2005-01-01

    Distributions of boundary misorientations in aluminium are measured as a function of deformation for strains up to 10. These experimental distributions are compared to misorientation distributions generated from a random mix of orientations present in the microstructure. It is found that for all ...

  7. Teachers' Use of Potentially Reinforcing Behaviors and Students' Task-Oriented Behavior.

    Science.gov (United States)

    Anderson, Lorin; And Others

    The present study focuses on two major questions. First, how often are potentially reinforcing behaviors emitted by teachers in naturally occurring classrooms? Second, what is the relationship between the display of potentially reinforcing behaviors by the teacher and the task-orientation of randomly selected students in the classrooms. Students…

  8. Effects of Task-Oriented Circuit Class Training on Walking Competency After Stroke A Systematic Review

    NARCIS (Netherlands)

    Wevers, Lotte; van de Port, Ingrid; Vermue, Mathijs; Mead, Gillian; Kwakkel, Gert

    Background and Purpose-There is increasing interest in the potential benefits of circuit class training after stroke, but its effectiveness is uncertain. Our aim was to systematically review randomized, controlled trials of task-oriented circuit class training on gait and gait-related activities in

  9. Surface electronic structure and molecular orientation of poly(9-vinylcarbazole) thin film: ARUPS and NEXAFS

    CERN Document Server

    Okudaira, K K; Hasegawa, S; Ishii, H; Azuma, Y; Imamura, M; Shimada, H; Seki, K; Ueno, N

    2001-01-01

    The molecular orientation at the surfaces of poly(9-vinylcarbazole) (PvCz) thin films was studied by angle-resolved ultraviolet photoelectron spectroscopy and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The observed take-off angle (theta) dependence of photoelectron intensities from top pi band peaks clearly at larger theta than the calculated one for the three-dimensional isotropic random orientation model. The results indicate that there are more pendant groups with large tilt angles than the three-dimensional isotropic random orientation model, which is in good agreement with the result obtained from NEXAFS spectroscopy. The surface electronic states of PvCz may be rather dominated by sigma(C-H) states at the pendant carbazole group than pi states

  10. Minimization over randomly selected lines

    Directory of Open Access Journals (Sweden)

    Ismet Sahin

    2013-07-01

    Full Text Available This paper presents a population-based evolutionary optimization method for minimizing a given cost function. The mutation operator of this method selects randomly oriented lines in the cost function domain, constructs quadratic functions interpolating the cost function at three different points over each line, and uses extrema of the quadratics as mutated points. The crossover operator modifies each mutated point based on components of two points in population, instead of one point as is usually performed in other evolutionary algorithms. The stopping criterion of this method depends on the number of almost degenerate quadratics. We demonstrate that the proposed method with these mutation and crossover operations achieves faster and more robust convergence than the well-known Differential Evolution and Particle Swarm algorithms.

  11. How random is a random vector?

    Science.gov (United States)

    Eliazar, Iddo

    2015-12-01

    Over 80 years ago Samuel Wilks proposed that the "generalized variance" of a random vector is the determinant of its covariance matrix. To date, the notion and use of the generalized variance is confined only to very specific niches in statistics. In this paper we establish that the "Wilks standard deviation" -the square root of the generalized variance-is indeed the standard deviation of a random vector. We further establish that the "uncorrelation index" -a derivative of the Wilks standard deviation-is a measure of the overall correlation between the components of a random vector. Both the Wilks standard deviation and the uncorrelation index are, respectively, special cases of two general notions that we introduce: "randomness measures" and "independence indices" of random vectors. In turn, these general notions give rise to "randomness diagrams"-tangible planar visualizations that answer the question: How random is a random vector? The notion of "independence indices" yields a novel measure of correlation for Lévy laws. In general, the concepts and results presented in this paper are applicable to any field of science and engineering with random-vectors empirical data.

  12. How random is a random vector?

    International Nuclear Information System (INIS)

    Eliazar, Iddo

    2015-01-01

    Over 80 years ago Samuel Wilks proposed that the “generalized variance” of a random vector is the determinant of its covariance matrix. To date, the notion and use of the generalized variance is confined only to very specific niches in statistics. In this paper we establish that the “Wilks standard deviation” –the square root of the generalized variance–is indeed the standard deviation of a random vector. We further establish that the “uncorrelation index” –a derivative of the Wilks standard deviation–is a measure of the overall correlation between the components of a random vector. Both the Wilks standard deviation and the uncorrelation index are, respectively, special cases of two general notions that we introduce: “randomness measures” and “independence indices” of random vectors. In turn, these general notions give rise to “randomness diagrams”—tangible planar visualizations that answer the question: How random is a random vector? The notion of “independence indices” yields a novel measure of correlation for Lévy laws. In general, the concepts and results presented in this paper are applicable to any field of science and engineering with random-vectors empirical data.

  13. Aggregated recommendation through random forests.

    Science.gov (United States)

    Zhang, Heng-Ru; Min, Fan; He, Xu

    2014-01-01

    Aggregated recommendation refers to the process of suggesting one kind of items to a group of users. Compared to user-oriented or item-oriented approaches, it is more general and, therefore, more appropriate for cold-start recommendation. In this paper, we propose a random forest approach to create aggregated recommender systems. The approach is used to predict the rating of a group of users to a kind of items. In the preprocessing stage, we merge user, item, and rating information to construct an aggregated decision table, where rating information serves as the decision attribute. We also model the data conversion process corresponding to the new user, new item, and both new problems. In the training stage, a forest is built for the aggregated training set, where each leaf is assigned a distribution of discrete rating. In the testing stage, we present four predicting approaches to compute evaluation values based on the distribution of each tree. Experiments results on the well-known MovieLens dataset show that the aggregated approach maintains an acceptable level of accuracy.

  14. The Management of the Citizen Oriented Applications

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2010-04-01

    Full Text Available The context of the knowledge based society is presented. The new user requirements in the context of the new society are analyzed. Basic concepts regarding the citizen oriented applications are presented. Issues specific to the citizen oriented applications are presented. The development cycle of the citizen oriented applications is analyzed. The particular elements for developing citizen oriented applications are described. The quality concept for the citizen oriented applications is defined. Quality characteristics and the costs of quality are defined and analyzed. A system of indicators for the quantification of the quality of the citizen oriented applications is developed. Ways of increasing the quality of the applications are analyzed. Issues as improving the users’ training level, implementing new development techniques, advanced testing techniques and the requirement of audit are approached. The concept of optimization is defined. Optimum criteria are defined and analyzed. Ways of optimizing applications are described. Security requirements are enumerated and described. The particularities of the security requirements for the citizen oriented applications are analyzed. Measures for ensuring the security of the citizen oriented applications are described. A citizen oriented application for the analysis of the structured entities is developed. The application collects data regarding the behavior of the users. The collected data are used for verifying the hypotheses regarding the quality characteristics if the citizen oriented informatics applications.

  15. Sexual orientation discrimination in hiring

    OpenAIRE

    Doris Weichselbaumer

    2000-01-01

    Little research has been done to examine discrimination against gays and lesbians in the labor market. Badgett (1995) conducted the only previous study investigating labor market outcomes of gays and lesbians using a random data set. However, due to the structure of the data, the wage differential between heterosexuals and gays and lesbians that is found can not be directly assigned to employer discrimination. Some gays and lesbians might deploy passing strategies to hide their sexual orienta...

  16. Understanding the role of emotion-oriented coping in women's motivation for change.

    Science.gov (United States)

    Wu, Qiong; Slesnick, Natasha; Zhang, Jing

    2018-03-01

    This study tested a sequential mediation model that emotion-oriented coping and motivation for change mediate the relations between anxiety and depressive symptoms and the change in substance use. Data included 183 substance using women, randomly assigned to family therapy (N=123) or individual therapy (N=60). They reported their baseline anxiety and depressive symptoms, emotion-oriented coping, as well as motivation for change throughout treatment, and substance use over a time period of 1.5years. Latent growth curve modeling showed that increased baseline motivation was associated with a faster decline in alcohol and drug use. Moreover, higher baseline anxiety and depressive symptoms were associated with a faster decrease in drug use through higher emotion-oriented coping and higher baseline motivation. This study underscores the importance of emotion-oriented coping in increasing clients' motivation and reducing their drug use. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Alignment of crystal orientations of the multi-domain photonic crystals in Parides sesostris wing scales

    Science.gov (United States)

    Yoshioka, S.; Fujita, H.; Kinoshita, S.; Matsuhana, B.

    2014-01-01

    It is known that the wing scales of the emerald-patched cattleheart butterfly, Parides sesostris, contain gyroid-type photonic crystals, which produce a green structural colour. However, the photonic crystal is not a single crystal that spreads over the entire scale, but it is separated into many small domains with different crystal orientations. As a photonic crystal generally has band gaps at different frequencies depending on the direction of light propagation, it seems mysterious that the scale is observed to be uniformly green under an optical microscope despite the multi-domain structure. In this study, we have carefully investigated the structure of the wing scale and discovered that the crystal orientations of different domains are not perfectly random, but there is a preferred crystal orientation that is aligned along the surface normal of the scale. This finding suggests that there is an additional factor during the developmental process of the microstructure that regulates the crystal orientation. PMID:24352678

  18. Perceived change in orientation from optic flow in the central visual field

    Science.gov (United States)

    Dyre, Brian P.; Andersen, George J.

    1988-01-01

    The effects of internal depth within a simulation display on perceived changes in orientation have been studied. Subjects monocularly viewed displays simulating observer motion within a volume of randomly positioned points through a window which limited the field of view to 15 deg. Changes in perceived spatial orientation were measured by changes in posture. The extent of internal depth within the display, the presence or absence of visual information specifying change in orientation, and the frequency of motion supplied by the display were examined. It was found that increased sway occurred at frequencies equal to or below 0.375 Hz when motion at these frequencies was displayed. The extent of internal depth had no effect on the perception of changing orientation.

  19. Who takes more sustainability-oriented entrepreneurial actions? The role of entrepreneurs' values, beliefs and orientations

    DEFF Research Database (Denmark)

    Jahanshahi, Asghar Afshar; Brem, Alexander; Bhattacharjee, Amitab

    2017-01-01

    We examine the relationships between entrepreneurs' values, beliefs and orientations with their firms' engagement in sustainability-oriented entrepreneurial actions, using a sample of 352 newly established businesses from two Asian countries (Bangladesh and Iran). Our results reveal a dual role o...... of sustainable entrepreneurship, by providing answers for recent calls for better understanding which entrepreneurial ventures engage more in sustainability-oriented actions.......We examine the relationships between entrepreneurs' values, beliefs and orientations with their firms' engagement in sustainability-oriented entrepreneurial actions, using a sample of 352 newly established businesses from two Asian countries (Bangladesh and Iran). Our results reveal a dual role...... of entrepreneurs' values, beliefs and orientations when taking sustainability-oriented actions. We confirm that individual differences in the set of values, beliefs and orientations can foster or hinder the sustainability-oriented actions across organizations. Our paper contributes to the growing literature...

  20. Lunar Rotation, Orientation and Science

    Science.gov (United States)

    Williams, J. G.; Ratcliff, J. T.; Boggs, D. H.

    2004-12-01

    The Moon is the most familiar example of the many satellites that exhibit synchronous rotation. For the Moon there is Lunar Laser Ranging measurements of tides and three-dimensional rotation variations plus supporting theoretical understanding of both effects. Compared to uniform rotation and precession the lunar rotational variations are up to 1 km, while tidal variations are about 0.1 m. Analysis of the lunar variations in pole direction and rotation about the pole gives moment of inertia differences, third-degree gravity harmonics, tidal Love number k2, tidal dissipation Q vs. frequency, dissipation at the fluid-core/solid-mantle boundary, and emerging evidence for an oblate boundary. The last two indicate a fluid core, but a solid inner core is not ruled out. Four retroreflectors provide very accurate positions on the Moon. The experience with the Moon is a starting point for exploring the tides, rotation and orientation of the other synchronous bodies of the solar system.

  1. Entrepreneurial Orientation in Mexican Microenterprises

    Directory of Open Access Journals (Sweden)

    Héctor Montiel Campos

    2013-01-01

    Full Text Available Over the past 30 years research on Entrepreneurship Orientation (EO has provided valuable information regarding strategy, entrepreneurship and aspects of performance at the firm-level. In the entrepreneurial universe, microenterprises play a very special role in the business context of the economy. However, they have not been relatively present in the EO research. This paper studies the EO-performance relationship in a group of microenterprises in Mexico and includes the Dominant Logic (DL as a variable that moderates this relationship. The results indicate that risk taking, proactiveness and competitive aggressiveness variables from the EO influence the microenterprise performance. In addition, the external DL conceptualization moderates the EO-performance relationship. This paper shows the conclusions of the investigation as well as the limitations and identifies future research methods.

  2. Orientation, distance, regulation and function of neighbouring genes

    Directory of Open Access Journals (Sweden)

    Gherman Adrian

    2009-01-01

    Full Text Available Abstract The sequencing of the human genome has allowed us to observe globally and in detail the arrangement of genes along the chromosomes. There are multiple lines of evidence that this arrangement is not random, both in terms of intergenic distances and orientation of neighbouring genes. We have undertaken a systematic evaluation of the spatial distribution and orientation of known genes across the human genome. We used genome-level information, including phylogenetic conservation, single nucleotide polymorphism density and correlation of gene expression to assess the importance of this distribution. In addition to confirming and extending known properties of the genome, such as the significance of gene deserts and the importance of 'head to head' orientation of gene pairs in proximity, we provide significant new observations that include a smaller average size for intervals separating the 3' ends of neighbouring genes, a correlation of gene expression across tissues for genes as far as 100 kilobases apart and signatures of increasing positive selection with decreasing interval size surprisingly relaxing for intervals smaller than ~500 base pairs. Further, we provide extensive graphical representations of the genome-wide data to allow for observations and comparisons beyond what we address.

  3. Perceptions of Sexual Orientation From Minimal Cues.

    Science.gov (United States)

    Rule, Nicholas O

    2017-01-01

    People derive considerable amounts of information about each other from minimal nonverbal cues. Apart from characteristics typically regarded as obvious when encountering another person (e.g., age, race, and sex), perceivers can identify many other qualities about a person that are typically rather subtle. One such feature is sexual orientation. Here, I review the literature documenting the accurate perception of sexual orientation from nonverbal cues related to one's adornment, acoustics, actions, and appearance. In addition to chronicling studies that have demonstrated how people express and extract sexual orientation in each of these domains, I discuss some of the basic cognitive and perceptual processes that support these judgments, including how cues to sexual orientation manifest in behavioral (e.g., clothing choices) and structural (e.g., facial morphology) signals. Finally, I attend to boundary conditions in the accurate perception of sexual orientation, such as the states, traits, and group memberships that moderate individuals' ability to reliably decipher others' sexual orientation.

  4. Perceptual load affects exogenous spatial orienting while working memory load does not.

    Science.gov (United States)

    Santangelo, Valerio; Finoia, Paola; Raffone, Antonino; Belardinelli, Marta Olivetti; Spence, Charles

    2008-01-01

    We examined whether or not increasing visual perceptual load or visual working memory (WM) load would affect the exogenous orienting of visuo-spatial attention, in order to assess whether or not exogenous orienting is genuinely automatic. In Experiment 1, we manipulated visual perceptual load by means of a central morphing shape that in some trials morphed into a particular target shape (a rectangle) that participants had to detect. In Experiment 2, the possibility that the presentation of any changing stimulus at fixation would eliminate exogenous orienting was ruled out, by presenting two alternating letters at fixation. In Experiment 3, we manipulated visual WM load by means of arrays consisting of three (low-load) or five (high-load) randomly located coloured squares. The participants had to remember these items in order to judge whether a cued square had been presented in the same or different colour at the end of each trial. In all the experiments, exogenous visuo-spatial attentional orienting was measured by means of an orthogonal spatial cuing task, in which the participants had to discriminate the elevation (up vs. down) of a visual target previously cued by a spatially nonpredictive visual cue. The results showed that increasing the perceptual load of the task eliminated the exogenous orienting of visuo-spatial attention. By contrast, increasing the WM load had no effect on spatial orienting. These results are discussed in terms of the light that they shed on claims regarding the automaticity of visuo-spatial exogenous orienting.

  5. A Mathematical Model to Capture Complex Microstructure Orientation on Insect Wings.

    Directory of Open Access Journals (Sweden)

    Delyle T Polet

    Full Text Available Microstructures on insect wings can promote directional drop shedding, and the local orientation of these structures is expected to facilitate drop removal. However, microstructures may exhibit very different orientations at different locations on the wing. Using the march fly Penthetria heteroptera, we propose that local orientation of small hairs (microtrichia reflects a balance of three nonexclusive strategies: (1 preventing water from becoming stuck in intervenous grooves (microtrichia point upslope, (2 shedding water off the wing as readily as possible (microtrichia point towards the nearest edge, and, (3 shedding water away from the body (microtrichia point distally. We present evidence for all three and show that local microtrichial orientation is seldom determined by any one factor. We develop a mathematical model that employs factor-specific weighting values determined via optimization. Our predictions are tested against the orientation of microtrichia randomly sampled from a P. heteroptera specimen. Using the best-fit weighting parameters, the model displays a median residual of 20°; no residual is greater than 46°. The model also reproduces qualitative aspects of microtrichial orientation, such as bifurcation midway between veins and convergence toward peaks. This strong correspondence between modelled and observed orientation supports the role of microtrichia as directional antiwetting devices and highlights the importance of considering both function and wing geometry to explain the organization of natural microstructure arrays.

  6. Laser method of free atom nuclei orientation

    International Nuclear Information System (INIS)

    Barabanov, A.L.

    1987-01-01

    Orientation process of free atom (atoms in beams) nuclei, scattering quanta of circularly polarized laser radiation is considered. A method for the evaluation of nuclei orientation parameters is developed. It is shown that in the process of pumping between the ground and first excited atomic states with electron shell spins J 1 and J 2 , so that J 2 = J 1 + 1, a complete orientation of nuclei can be attained

  7. Radiology image orientation processing for workstation display

    Science.gov (United States)

    Chang, Chung-Fu; Hu, Kermit; Wilson, Dennis L.

    1998-06-01

    Radiology images are acquired electronically using phosphor plates that are read in Computed Radiology (CR) readers. An automated radiology image orientation processor (RIOP) for determining the orientation for chest images and for abdomen images has been devised. In addition, the chest images are differentiated as front (AP or PA) or side (Lateral). Using the processing scheme outlined, hospitals will improve the efficiency of quality assurance (QA) technicians who orient images and prepare the images for presentation to the radiologists.

  8. The market orientation: competitive organizational strategy

    OpenAIRE

    Rivera Camino, Jaime

    1995-01-01

    This article reports a definition of Market Orientation whieh supported from a perspeetive of strategy implementation. It is different from the studies that eonsider the identity of Market Orientation as the adoption of the marketing eoncept or the implementation of a business culture. The results obtained from two eountries provide empirical support to our definition of Market Orientation as competitive strategy. This is reported independent from the marketing department and is capable of be...

  9. Navigations: The Road to a Better Orientation.

    Science.gov (United States)

    Rizzo, Leah Heather

    2016-01-01

    A team of nursing professional development specialists from a large Magnet® healthcare network transformed new employee orientation using a themed, interdisciplinary, learner-centered approach. Guided by project management principles, the nursing professional development team created an engaging program that serves as an interactive guide for new hires' orientation journey. This unique approach differs from traditional orientation programs through its incorporation of gaming, video clips, and group discussions.

  10. Self-Employment, Earnings, and Sexual Orientation

    OpenAIRE

    Jepsen, Christopher; Jepsen, Lisa K.

    2017-01-01

    Although many studies document differences by sexual orientation in earnings and other labor-market outcomes, little is known about differences in self-employment. Our study contributes to both the self-employment literature and sexual-orientation literature by analyzing differences in self-employment rates and earnings by sexual orientation. Gay men are less likely to be self-employed than married men, whereas lesbians are equally likely to be self-employed as married women. We find that gay...

  11. Service orientation of the restaurant employees

    OpenAIRE

    Gagić, Snježana; Vuković-Jovičić, Ana; Petrović, Marko D.

    2017-01-01

    The service orientation program developed for restaurant employees can be a competitive advantage for a restaurant operation. Service orientation has been characterized as the disposition of employees to be helpful, thoughtful, considerate, and co-operative towards customers. Customer-oriented behaviors include: helping customers; helping customers to assess their needs; offering service that will satisfy those needs; describing services accurately; avoiding deceptive manipulations; and avoid...

  12. Modelling and analysing oriented fibrous structures

    International Nuclear Information System (INIS)

    Rantala, M; Lassas, M; Siltanen, S; Sampo, J; Takalo, J; Timonen, J

    2014-01-01

    A mathematical model for fibrous structures using a direction dependent scaling law is presented. The orientation of fibrous nets (e.g. paper) is analysed with a method based on the curvelet transform. The curvelet-based orientation analysis has been tested successfully on real data from paper samples: the major directions of fibrefibre orientation can apparently be recovered. Similar results are achieved in tests on data simulated by the new model, allowing a comparison with ground truth

  13. The axiological orientation of students’ personalities

    OpenAIRE

    Sergey I. Kudinov; Stanislav S. Kudinov; Irina B. Kudinova; Sofia S. Belousova

    2018-01-01

    Background. Our empirical research and analysis revealed characteristics of the axiological orientation of students’ personalities. Objective.We identified the principal types of orientation, dominant values, and attitudes of the personality in the motivational-needs sphere through a variety of validated and reliable techniques and methods. Design We understand the axiological orientation of the personality as a relatively stable set of values, motivations, needs, and moral structure...

  14. Aesthetic Judgement of Orientation in Modern Art

    Directory of Open Access Journals (Sweden)

    George Mather

    2012-01-01

    Full Text Available When creating an artwork, the artist makes a decision regarding the orientation at which the work is to be hung based on their aesthetic judgement and the message conveyed by the piece. Is the impact or aesthetic appeal of a work diminished when it is hung at an incorrect orientation? To investigate this question, Experiment 1 asked whether naïve observers can appreciate the correct orientation (as defined by the artist of 40 modern artworks, some of which are entirely abstract. Eighteen participants were shown 40 paintings in a series of trials. Each trial presented all four cardinal orientations on a computer screen, and the participant was asked to select the orientation that was most attractive or meaningful. Results showed that the correct orientation was selected in 48% of trials on average, significantly above the 25% chance level, but well below perfect performance. A second experiment investigated the extent to which the 40 paintings contained recognisable content, which may have mediated orientation judgements. Recognition rates varied from 0% for seven of the paintings to 100% for five paintings. Orientation judgements in Experiment 1 correlated significantly with “meaningful” content judgements in Experiment 2: 42% of the variance in orientation judgements in Experiment 1 was shared with recognition of meaningful content in Experiment 2. For the seven paintings in which no meaningful content at all was detected, 41% of the variance in orientation judgements was shared with variance in a physical measure of image content, Fourier amplitude spectrum slope. For some paintings, orientation judgements were quite consistent, despite a lack of meaningful content. The origin of these orientation judgements remains to be identified.

  15. Surface immobilized antibody orientation determined using ToF-SIMS and multivariate analysis.

    Science.gov (United States)

    Welch, Nicholas G; Madiona, Robert M T; Payten, Thomas B; Easton, Christopher D; Pontes-Braz, Luisa; Brack, Narelle; Scoble, Judith A; Muir, Benjamin W; Pigram, Paul J

    2017-06-01

    Antibody orientation at solid phase interfaces plays a critical role in the sensitive detection of biomolecules during immunoassays. Correctly oriented antibodies with solution-facing antigen binding regions have improved antigen capture as compared to their randomly oriented counterparts. Direct characterization of oriented proteins with surface analysis methods still remains a challenge however surface sensitive techniques such as Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) provide information-rich data that can be used to probe antibody orientation. Diethylene glycol dimethyl ether plasma polymers (DGpp) functionalized with chromium (DGpp+Cr) have improved immunoassay performance that is indicative of preferential antibody orientation. Herein, ToF-SIMS data from proteolytic fragments of anti-EGFR antibody bound to DGpp and DGpp+Cr are used to construct artificial neural network (ANN) and principal component analysis (PCA) models indicative of correctly oriented systems. Whole antibody samples (IgG) test against each of the models indicated preferential antibody orientation on DGpp+Cr. Cross-reference between ANN and PCA models yield 20 mass fragments associated with F(ab') 2 region representing correct orientation, and 23 mass fragments associated with the Fc region representing incorrect orientation. Mass fragments were then compared to amino acid fragments and amino acid composition in F(ab') 2 and Fc regions. A ratio of the sum of the ToF-SIMS ion intensities from the F(ab') 2 fragments to the Fc fragments demonstrated a 50% increase in intensity for IgG on DGpp+Cr as compared to DGpp. The systematic data analysis methodology employed herein offers a new approach for the investigation of antibody orientation applicable to a range of substrates. Controlled orientation of antibodies at solid phases is critical for maximizing antigen detection in biosensors and immunoassays. Surface-sensitive techniques (such as ToF-SIMS), capable of direct

  16. Performance implications of waste package emplacement orientation

    International Nuclear Information System (INIS)

    Wilder, D.G.

    1991-05-01

    Emplacement borehole orientation directly impacts many aspects of the Engineered Barrier System (EBS) and interactions with the near field environment. This paper considers the impacts of orientation on the hydrologic portion of the environment and its interactions with the EBS. The hydrologic environment is considered from a conceptual standpoint, the numerical analyses are left for subsequent work. As reported in this paper, several aspects of the hydrological environment are more favorable for long term performance of vertically oriented rather than horizontally oriented Waste Packages. 19 refs., 15 figs

  17. Dynamics of market orientation in Croatian economy

    Directory of Open Access Journals (Sweden)

    Ivana First

    2011-12-01

    Full Text Available It was the goal of this research to examine the dynamics of Croatian transformation to market orientation and test whether the market orientation model changes with time as the business environment changes. Based on the literature analysis, we proposed a hypothetical model which relies on behavioural approach in understanding market orientation. To empirically test the hypothetical model, we used data previously collected for 2001, and by replicating the same questionnaire now collected data for 2011. Data was analyzed by hierarchical regression analysis on the two sets of data. Our findings reveal that Croatian organizations reached the level of moderate market orientation leaving space for improvement. Findings also reveal that higher level of market orientation correlates with higher business performance. Furthermore, with development of ICT, the model of market orientation modified in time in a way that in predicting successful market oriented reaction, specific information on consumer satisfaction gains importance, while general information from competitor and consumer databases lose importance. Despite the changes in the relationships among the elements of market orientation, the model itself similarly predicts performance today as it did ten years ago. Managers are advised to increase implementation of market orientation especially focusing on market responsiveness as such behaviour will lead to better performance.

  18. Open Issues in Object-Oriented Programming

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1995-01-01

    We discuss a number of open issues within object-oriented programming. The central mechanisms of object-oriented programming appeared with Simula, developed more than 30 years ago; these include class, subclass, virtual function, active object and the first application framework, Class Simulation....... The core parts of object-oriented programming should be well understood, but there are still a large number of issues where there is no consensus. The term object-orientation has been applied to many subjects, such as analysis, design implementation, data modeling in databases, and distribution...

  19. Programming in an object-oriented environment

    CERN Document Server

    Ege, Raimund K

    1992-01-01

    Programming in an Object-Oriented Environment provides an in-depth look at the concepts behind the technology of object-oriented programming.This book explains why object-oriented programming has the potential to vastly improve the productivity of programmers and how to apply this technology in a practical environment. Many programming examples are included, focusing on how different programming languages support the core of object-oriented concepts. C++ is used as the main sample language throughout this text.This monograph consists of two major parts. Part I provides an introduction to objec

  20. The necessity of randomness in tests of Bell inequalities

    Energy Technology Data Exchange (ETDEWEB)

    Bednorz, Adam; Zielinski, Jakub

    2003-08-11

    The possibility that detectors may affect the input quantum entangled state is pointed out. It is suggested that experiments testing Bell inequalities should be repeated with more randomly oriented polarizers to both close communication loophole and refute certain local variable theories with low efficiency bound.

  1. Electrospinning of oriented and nonoriented ultrafine fibers of biopolymers

    Science.gov (United States)

    Vu, David

    2005-07-01

    Chitosan has long been known as a biocompatible and biodegradable material suitable for tissue engineering applications. Unfortunately, conventional chitosan solutions cannot be used for electrospinning due to their high conductivity, viscosity and surface tension. We have developed a method to produce clear chitosan solutions with conductivities, surface tension and viscosities that facilitate their processing into micron and submicron fibers via electrospinning. Acetic acid, carbon dioxide and organic solvents are key ingredients in preparing the chitosan solutions. Oriented and non oriented chitosan fibers were produced with the ultimate goal of designing a suitable tissue engineering scaffold. Circularly oriented, continuous, and aligned nanofibers were produced via this technique in the form of a thin membrane or fibrous "mat". Chitosan fiber diameters ranged from 5 micrometers down to 100 nanometers. The structure and mechanical properties of oriented and randomly aligned chitosan fiber deposits could potentially be exploited for cartilage tissue engineering. Ultrafine fibers of starch acetate (SA) also were prepared by the electrospinning process. In this study, solvent mixtures based on DMF, DMSO, pyrindine, acetic acid, acetone, THF, DMC, chloroform were used. A two-solvent formulation was used to study the effect of viscosity, surface tension, and conductivity to the fiber diameter. Also, water and ethanol were used to decrease the boiling point of the solvent, and to make bundled fibers. Several techniques such as scanning electron microscopy, conductmetry, viscometry, and tensiometry were used in this study. The results showed that the combined effects of viscosity, surface tension, and conductivity are of great importance in controlling the diameter of the fibers. We were able to produce SA fibers that was less than 40 nm in diameter. The dependence of fiber diameter on flow-rate, electric field and solvents also was investigated. A rotating disk and a

  2. Highly oriented poly(di-n-alkylsilylene) films on oriented PTFE substrates

    NARCIS (Netherlands)

    Frey, H.H.; Frey, Holger; Sheiko, Sergej; Sheiko, S.; Moller, M.; Möller, Martin; Wittmann, Jean-Claude; Lot, Bernard

    1993-01-01

    Highly oriented polysilylene layers have potential applications in electrophotography, nonlinear optics, display fabrication, and microlithography. The preparation of such layers by crystallization on a highly oriented PTFE substrate is reported, and their assessment by optical birefringence,

  3. Red orientalism: Mikhail Pavlovich and Marxist Oriental studies in early Soviet Russia

    NARCIS (Netherlands)

    Kemper, M.

    2010-01-01

    Marxist Oriental Studies in early Soviet Russia emerged in opposition to the 'bourgeois' Russian tradition of classical Oriental scholarship; rather than studying texts and history, Bolshevik Orientalists saw their task in providing the Soviet government with the necessary political and

  4. Bioinspired orientation-dependent friction.

    Science.gov (United States)

    Xue, Longjian; Iturri, Jagoba; Kappl, Michael; Butt, Hans-Jürgen; del Campo, Aránzazu

    2014-09-23

    Spatular terminals on the toe pads of a gecko play an important role in directional adhesion and friction required for reversible attachment. Inspired by the toe pad design of a gecko, we study friction of polydimethylsiloxane (PDMS) micropillars terminated with asymmetric (spatular-shaped) overhangs. Friction forces in the direction of and against the spatular end were evaluated and compared to friction forces on symmetric T-shaped pillars and pillars without overhangs. The shape of friction curves and the values of friction forces on spatula-terminated pillars were orientation-dependent. Kinetic friction forces were enhanced when shearing against the spatular end, while static friction was stronger in the direction toward the spatular end. The overall friction force was higher in the direction against the spatula end. The maximum value was limited by the mechanical stability of the overhangs during shear. The aspect ratio of the pillar had a strong influence on the magnitude of the friction force, and its contribution surpassed and masked that of the spatular tip for aspect ratios of >2.

  5. Plenoptic background oriented schlieren imaging

    International Nuclear Information System (INIS)

    Klemkowsky, Jenna N; Fahringer, Timothy W; Clifford, Christopher J; Thurow, Brian S; Bathel, Brett F

    2017-01-01

    The combination of the background oriented schlieren (BOS) technique with the unique imaging capabilities of a plenoptic camera, termed plenoptic BOS, is introduced as a new addition to the family of schlieren techniques. Compared to conventional single camera BOS, plenoptic BOS is capable of sampling multiple lines-of-sight simultaneously. Displacements from each line-of-sight are collectively used to build a four-dimensional displacement field, which is a vector function structured similarly to the original light field captured in a raw plenoptic image. The displacement field is used to render focused BOS images, which qualitatively are narrow depth of field slices of the density gradient field. Unlike focused schlieren methods that require manually changing the focal plane during data collection, plenoptic BOS synthetically changes the focal plane position during post-processing, such that all focal planes are captured in a single snapshot. Through two different experiments, this work demonstrates that plenoptic BOS is capable of isolating narrow depth of field features, qualitatively inferring depth, and quantitatively estimating the location of disturbances in 3D space. Such results motivate future work to transition this single-camera technique towards quantitative reconstructions of 3D density fields. (paper)

  6. Transit oriented development in Belgrade

    Directory of Open Access Journals (Sweden)

    Sava Atanacković

    2005-01-01

    Full Text Available In Belgrade the process of transition from oriental kasaba to European city was long and thwarted by various economic political and social cultural factors. The European ideal still hasn’t been reached. Transition, as a development process in Belgrade, operates by a specific paradoxical inversion – the logic of harmonised development of urban transport, urban form and structure, which in theories of urban planning appears as a postulate, is in Belgrade influenced by incredible, ephemeral, disfigured, yet authentic transformation. However, quality solutions, conclusions and recommendations for further implementation of the idea about introducing the new public transport system, which is part of the main project for the first light metro line in Belgrade, establishment of a united group of experts, investors, negotiators, public opinion and all actors needed to make decisions, united and uncompromising idea about the future image and quality of urban life in Belgrade, have uncovered an until recently untried field of possibilities for transport management coupled with urban development as the optimal and acceptable model. City life could again become dynamic, productive and attractive.

  7. Danske retningsadverbier og rumlig orientering

    DEFF Research Database (Denmark)

    Hovmark, Henrik

    Denne ph.d.-afhandling rummer en undersøgelse af brugen af de danske ret­nings­adverbier (= RA) (ud, ind, op, ned, hen, over, om samt hjem og tilbage) som udtryk for rumlig orientering set ud fra en kognitiv-semantisk synsvinkel (Talmy, Langacker) og med fokus på forholdet mellem sprog, kultur og...... eventuelle sammenhænge mellem sproglig konceptualisering og kul­turel kontekst i brugen af RA. Afhandlingens undersøgelse falder i to hoveddele: 1) En beskrivelse af RAs kernesemantik på basis af undersøgelser i Ømålsordbogens samlinger, Korpus 2000 og Google. 2) En undersøgelse af variationen i brugen af RA......, primært på basis af en række interview med dialekttalende i et sydvestfynsk lokalområde (Helnæs). Afhandlingens analyse af RAs kernesemantik fokuserer på følgende: 1) en be­skrivelse af hvordan RA kan indkode en talers (eller protago­nists) synspunkt og dermed et deiktisk centrum i ytringen, 2) RAs rolle...

  8. Trunk orientation, stability and quadrupedalism

    Directory of Open Access Journals (Sweden)

    Yuri P Ivanenko

    2013-03-01

    Full Text Available Interesting cases of human quadrupedalism described by Uner Tan and colleagues (2005-2012 have attracted the attention of geneticists, neurologists and anthropologists. Since his first publications in 2005, the main attention has focused on the genetic aspects of disorders that lead to quadrupedalism within an evolutionary framework. In recent years this area has undergone a convincing critique (Downey 2010 and ended with a call "... to move in a different direction … away from thinking solely in terms of genetic abnormality and evolutionary atavism". We consider quadrupedalism as a ‘natural experiment’ that may contribute to our knowledge of the physiological mechanisms underlying our balance system and our tendency toward normal (upright posture. Bipedalism necessitates a number of characteristics that distinguish us from our ancestors and present-day mammals, including: size and shape of the bones of the foot, structure of the axial and proximal musculature, and the orientation of the human body and head. In this review we address the results of experimental studies on the mechanisms that stabilize the body in healthy people, as well as how these mechanisms may be disturbed in various forms of clinical pathology. These disturbances are related primarily to automatic rather than voluntary control of posture and suggest that human quadrupedalism is a behavior that can result from adaptive processes triggered by disorders in postural tone and environmental cues. These results will serve as a starting point for comparing and contrasting bi- and quadrupedalism.

  9. Testing Object-Oriented Software

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Madsen, Ole Lehrmann; Skov, Stefan H.

    The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto-types that......The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto......-types that are currently being developed into production versions. To assure a high quality in the product it was decided to carry out an activ-ity regarding issues in testing OO software. The purpose of this report is to discuss the issues of testing object-oriented software. It is often claimed that testing of OO...... software is radically different form testing traditional software developed using imperative/procedural programming. Other authors claim that there is no difference. In this report we will attempt to give an answer to these questions (or at least initiate a discussion)....

  10. Elastic properties of woven bone: effect of mineral content and collagen fibrils orientation.

    Science.gov (United States)

    García-Rodríguez, J; Martínez-Reina, J

    2017-02-01

    Woven bone is a type of tissue that forms mainly during fracture healing or fetal bone development. Its microstructure can be modeled as a composite with a matrix of mineral (hydroxyapatite) and inclusions of collagen fibrils with a more or less random orientation. In the present study, its elastic properties were estimated as a function of composition (degree of mineralization) and fibril orientation. A self-consistent homogenization scheme considering randomness of inclusions' orientation was used for this purpose. Lacuno-canalicular porosity in the form of periodically distributed void inclusions was also considered. Assuming collagen fibrils to be uniformly oriented in all directions led to an isotropic tissue with a Young's modulus [Formula: see text] GPa, which is of the same order of magnitude as that of woven bone in fracture calluses. By contrast, assuming fibrils to have a preferential orientation resulted in a Young's modulus in the preferential direction of 9-16 GPa depending on the mineral content of the tissue. These results are consistent with experimental evidence for woven bone in foetuses, where collagen fibrils are aligned to a certain extent.

  11. Injective Labeled Oriented Trees are Aspherical

    OpenAIRE

    Harlander, Jens; Rosebrock, Stephan

    2012-01-01

    A labeled oriented tree is called injective if each generator occurs at most once as an edge label. We show that injective labeled oriented trees are aspherical. The proof relies on a new relative asphericity test based on a lemma of Stallings.

  12. Market-oriented research and competence development

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    2002-01-01

    At MAPP, we are convinced that market orientation is a good thing. We know that it contributes to better company performance, in the food sector and elsewhere. We also believe in market orientation in our work. Among other things, this implies that our research has to be topical and relevant in t...

  13. Access control and service-oriented architectures

    NARCIS (Netherlands)

    Leune, C.J.

    2007-01-01

    Access Control and Service-Oriented Architectures" investigates in which way logical access control can be achieved effectively, in particular in highly dynamic environments such as service-oriented architectures (SOA's). The author combines state-of-the-art best-practice and projects these onto the

  14. Research oriented projects on design themese

    DEFF Research Database (Denmark)

    Tollestrup, Christian; Eriksen, Kaare; Ovesen, Nis

    2011-01-01

    How can design students do research-oriented projects about design themes? At the 3rd semester at the Industrial Design Master Program at Aalborg University this is done by taking research oriented learning objectives on design theories and methods and combining them with experimental case studie...... and professional self-reflection amongst students are improved....

  15. Plug & Play object oriented Bayesian networks

    DEFF Research Database (Denmark)

    Bangsø, Olav; Flores, J.; Jensen, Finn Verner

    2003-01-01

    been shown to be quite suitable for dynamic domains as well. However, processing object oriented Bayesian networks in practice does not take advantage of their modular structure. Normally the object oriented Bayesian network is transformed into a Bayesian network and, inference is performed...... dynamic domains. The communication needed between instances is achieved by means of a fill-in propagation scheme....

  16. The democratic role orientation by journalists

    DEFF Research Database (Denmark)

    Svith, Flemming

    This paper investigates the democratic role orientation in news media and the perception and preference in the population towards the democratic practice of these news media.......This paper investigates the democratic role orientation in news media and the perception and preference in the population towards the democratic practice of these news media....

  17. Distinctive Characteristics of Sexual Orientation Bias Crimes

    Science.gov (United States)

    Stacey, Michele

    2011-01-01

    Despite increased attention in the area of hate crime research in the past 20 years, sexual orientation bias crimes have rarely been singled out for study. When these types of crimes are looked at, the studies are typically descriptive in nature. This article seeks to increase our knowledge of sexual orientation bias by answering the question:…

  18. Employee Orientation: A Process, Not a Program.

    Science.gov (United States)

    Zemke, Ron

    1989-01-01

    No or poor orientation can reduce new employees' effectiveness and contribute to dissatisfaction and turnover, costing the company money. The orientation programs of large companies such as Disney, Texas Instruments, and Corning Glass are successful due to high expectations, supervisor and senior management involvement, anxiety reduction, and…

  19. FOOD ENTREPRENEUR SUSTAINABLE ORIENTATION AND FIRM PRACTICES

    OpenAIRE

    Mark A. Gagnon; Pamela A. Heinrichs

    2016-01-01

    This exploratory research examines the relationship between food entrepreneur sustainable orientation, mindset and firm sustainable practices in a mixed methods format. In particular we seek to address if entrepreneur behavior and firm practices are congruent with founding entrepreneur espoused support of sustainability. Our survey findings with thirty specialty food entrepreneurs suggest tenuous empirical support for the relationship of entrepreneur sustainable orientation, mindset and firm ...

  20. Parallel object-oriented specification language

    NARCIS (Netherlands)

    Florescu, O.; Voeten, J.P.M.; Theelen, B.D.; Geilen, M.C.W.; Corporaal, H.; Burns, Alan

    2008-01-01

    The Parallel Object-Oriented Specification Language (POOSL) is an expressive modelling language for hardware/software systems [10]. It was originally defined in [7] as an object-oriented extension of process algebra CCS [6], supporting (conditional) synchronous message passing between

  1. Object-Oriented Econometrics with Ox

    OpenAIRE

    Kulaksizoglu, Tamer

    2015-01-01

    This article reviews the object-oriented features of the Ox matrix programming language. We discuss object-oriented programming in general and give econometric examples coded in Ox. We also discuss some useful built-in classes that come with the Ox distribution.

  2. Getting started with OrientDB

    CERN Document Server

    Tesoriero, Claudio

    2013-01-01

    A standard tutorial aimed at making you an OrientDB expert, through the use of practical examples, explained in a step-by-step format.Getting Started with OrientDB 1.3.0 is great for database designers, developers, and systems engineers. It is assumed that you are familiar with NoSQL concepts, Java, and networking principles.

  3. Market Orientation in University: A Case Study

    Science.gov (United States)

    Kuster, Ines; Aviles-Valenzuela, Maria Elena

    2010-01-01

    Purpose: The paper aims to analyse the relationship between market orientation (MO) and results in the field of higher education, considering the importance of university teaching staff MO in relation to satisfaction and establishing that this orientation is directly and positively affected by the MO of the upper hierarchical levels. The focus is…

  4. An orientation theorem with parity conditions

    DEFF Research Database (Denmark)

    Frank, András; Jordan, Tibor; Szigeti, Zoltán

    2001-01-01

    Given a graph G=(V,E) and a set , an orientation of G is called T-odd if precisely the vertices of T get odd in-degree. We give a good characterization for the existence of a T-odd orientation for which there exist k edge-disjoint spanning arborescences rooted at a prespecified set of k roots. Ou...

  5. 36 CFR 13.1236 - Bear orientation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Bear orientation. 13.1236 Section 13.1236 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR... Developed Area § 13.1236 Bear orientation. All persons visiting the BCDA must receive an NPS-approved Bear...

  6. Human Resource Orientation and Corporate Performance.

    Science.gov (United States)

    Lam, Long W.; White, Louis P.

    1998-01-01

    A study of 14 manufacturing firms found significantly better financial performance among those that strongly emphasized recruitment, compensation, and training and development (a human resource orientation). Human resource development that helped sustain competence combined with that orientation to form a valuable competitive advantage. (SK)

  7. Molecule-oriented programming in Java

    NARCIS (Netherlands)

    Bergstra, J.A.

    2002-01-01

    Molecule-oriented programming is introduced as a programming style carrying some perspective for Java. A sequence of examples is provided. Supporting the development of the molecule-oriented programming style several matters are introduced and developed: profile classes allowing the representation

  8. 20 CFR 638.500 - Orientation program.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Orientation program. 638.500 Section 638.500 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Center Operations § 638.500 Orientation program. The...

  9. Towards "Bildung"-Oriented Chemistry Education

    Science.gov (United States)

    Sjöström, Jesper

    2013-01-01

    This paper concerns "Bildung"-oriented chemistry education, based on a reflective and critical discourse of chemistry. It is contrasted with the dominant type of chemistry education, based on the mainstream discourse of chemistry. "Bildung"-oriented chemistry education includes not only content knowledge in chemistry, but also…

  10. Galveston Orientation Amnesia Test (GOAT Galveston Orientation Amnesia Test (GOAT Galveston Orientation Amnesia Test (GOAT

    Directory of Open Access Journals (Sweden)

    Silvia Cristina Fürbringer e Silva

    2009-12-01

    Full Text Available O trauma crânio-encefálico contuso (TCEC é freqüentemente seguido pela amnésia pós-traumática (APT, caracterizada como um estado transitório de confusão e desorientação. Sua duração tem sido utilizada para quantificar a gravidade do TCEC e prever distúrbios nas funções cognitivas, assim como para antever as alterações na capacidade funcional das vítimas pós-trauma. O Galveston Orientation Amnesia Test (GOAT é o primeiro instrumento sistematizado criado e o mais amplamente utilizado para avaliar a APT. Este artigo apresenta esse instrumento, as bases conceituais para seu desenvolvimento e a adaptação e validação do GOAT para cultura brasileira. Além disso, descreve sua aplicação e comenta as restrições do seu uso. Resultados de pesquisas realizadas em nosso meio contribuíram para as evidências sobre a validade do GOAT. Também apontaram os indicadores do momento pós-trauma em que o GOAT deve ser aplicado e destacaram as dificuldades no uso desse instrumento.El trauma cráneo-encefálico contuso (TCEC es frecuentemente seguido por la amnesia pos-traumática (APT, caracterizada como un estado transitorio de confusión y desorientación. Su duración ha sido utilizada para cuantificar la severidad del TCEC y prever alteraciones en las funciones cognitivas, tanto como para antever las dificultades en la capacidad funcional de las víctimas pos-trauma. El Galveston Orientation Amnésia Test (GOAT es la primera encuesta sistematizada que fue creada y el mas ampliamente utilizada para evaluar la APT. Esta publicación presenta esta encuesta, las bases conceptuales para su desarrollo y la adaptación y validación del GOAT para la cultura brasileña. Además, describe su aplicación y limitaciones en el uso. Resultados de pesquisas brasileñas contribuyeron para las evidencias sobre la validad del GOAT. También apuntaron los indicadores del momento pos-trauma en que el GOAT debe ser aplicado y destacaron las dificultades

  11. Asymmetries in perception of 3D orientation.

    Directory of Open Access Journals (Sweden)

    Allan C Dobbins

    2010-03-01

    Full Text Available Visual scene interpretation depends on assumptions based on the statistical regularities of the world. People have some preference for seeing ambiguously oriented objects (Necker cubes as if tilted down or viewed from above. This bias is a near certainty in the first instant (approximately 1 s of viewing and declines over the course of many seconds. In addition, we found that there is modulation of perceived orientation that varies with position--for example objects on the left are more likely to be interpreted as viewed from the right. Therefore there is both a viewed-from-above prior and a scene position-dependent modulation of perceived 3-D orientation. These results are consistent with the idea that ambiguously oriented objects are initially assigned an orientation consistent with our experience of an asymmetric world in which objects most probably sit on surfaces below eye level.

  12. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    2017-01-01

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object......-oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  13. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object......-oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  14. Barriers to increased market-oriented activity

    DEFF Research Database (Denmark)

    Bisp, Søren

    1999-01-01

    and related activities still seem to attract relatively few resources is not answered by supplying another checklist or package of facilitators. Based on published conceptual writings and empirical studies this article makes an account of what the intra-organizational barriers may be to increased market......Most research on market orientation has dealt with assessing how market orientation behaviour is related to business performance. This work has established an intense market-oriented activity as significantly and positively related to business performance under most circumstances. In a maturing......-oriented activity. A framework of six generic domains is suggested: Organizational structure, human resource management, market-oriented activity competence, psychological climate, managers' personality characteristics, and individually held beliefs. A model is suggested inter-relating the domains....

  15. The influence of preferred orientation and poling temperature on the polarization switching current in PZT thin films

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Mi; Zhang, Weikang; Zhang, Zebin; Zhang, Ping [Tianjin University, School of Electrical and Information Engineering, Tianjin (China); Lan, Kuibo [Tianjin University, School of Microelectronics, Tianjin (China)

    2017-07-15

    In this paper, Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) thin films with different preferred orientation were prepared on platinized silicon substrates by a modified sol-gel method. Our results indicate that the polarization switching current in PZT thin films is dependent on preferred orientation and poling temperature. In our measurements, (111)-oriented PZT has a larger polarization switching current than randomly oriented PZT, and with the increase of the degree of (111) preferred orientation and the poling temperature, the polarization switching current gradually increase. Considering the contact of PZT thin film with electrodes, the space-charged limited conduction (SCLC) combined with domain switching mechanism may be responsible for such phenomena. By analyzing the conduction data, we found the interface-limited Schottky emission (ES) and bulk-limited Poole-Frenkel hopping (PF) are not suitable for our samples. (orig.)

  16. Fabrication of crystal-oriented barium-bismuth titanate ceramics in high magnetic field and subsequent reaction sintering

    International Nuclear Information System (INIS)

    Tanaka, Satoshi; Tomita, Yusuke; Furushima, Ryoichi; Uematsu, Keizo; Shimizu, Hiroyuki; Doshida, Yutaka

    2009-01-01

    High magnetic field was applied to fabricate novel lead-free piezoelectric ceramics with a textured structure. A compact of crystallographically oriented grains was prepared by dry forming in a high magnetic field from a mixed slurry of bismuth titanate and barium titanate powders. Bismuth titanate particles with a size of about 1 μ m were used as the host material. In the forming process, the slurry was poured into a mold and set in a magnetic field of 10 T until completely dried. Bismuth titanate particles were highly oriented in the slurry under the magnetic field. The dried powder compact consisted of highly oriented bismuth titanate particles and randomly oriented barium titanate particles. Barium bismuth titanate ceramics with a- and b-axis orientations were successfully produced from the dried compact by sintering at temperatures above 1100 deg. C.

  17. Value orientation and framing as determinants of stated willingness to pay for eco-labeled electricity

    Energy Technology Data Exchange (ETDEWEB)

    Hansla, A. [Department of Psychology, University of Gothenburg, P.O. Box 500, 40530 Goeteborg (Sweden)

    2011-03-15

    In the context of a survey, an experiment examined how egoistic, altruistic, and biospheric framing of consequences influence stated willingness to pay (SWTP) for eco-labeled electricity. The results for a random sample of 476 Swedish residents showed that SWTP decreases linearly with size of the surcharge for eco-labeled electricity, that SWPT is higher for biospheric framing than for altruistic and egoistic framing, and that SWPT does not differ for altruistic and egoistic framing. A higher SWPT is also observed for individuals with a self-transcendence value orientation than for individuals with a self-enhancement value orientation.

  18. Polarization difference due to nonrandomly oriented ice particles at millimeter/submillimeter waveband

    International Nuclear Information System (INIS)

    Xie Xinxin; Miao Jungang

    2011-01-01

    This paper presents polarized signature due to oriented circular columnar and planar ice crystals at millimeter/submillimeter (mm/sub-mm) waveband. DDSCAT 6.1 and RT4 code package are employed for scattering properties and radiative transfer simulations, respectively, at the three estimated window frequencies (150, 220 and 340 GHz) of FengYun-4 (FY-4). We use empirical formulas to describe realistic sizes of planar and columnar particles and assume that ice particles are in Gamma-size distribution in this study. A 'resonance' feature of polarized signals as a function of median mass diameter is notably found for horizontally oriented columns and blunt plates at the frequency of 340 GHz; however, there is no promising resonance characteristic for horizontally aligned plates with empirical sizes at the three window channels of FY-4. The position of the resonance peak is related to particle aspect ratio, frequency and ice water path (IWP), and it moves to a shorter median mass diameter when the particle aspect ratio decreases or IWP in clouds increases. Considering that particle canting angle distribution (Gaussian distribution in this study), polarization difference, as well as the brightness temperature difference between clear and cloudy sky, decreases rapidly when particles gradually change from horizontally oriented to randomly oriented. The upwelling brightness temperature is insensitive to particle size and shape but sensitive to particle orientation, the difference of brightness temperature between horizontal and random orientation up to 6 K, whereas polarized signature is quite sensitive to particle microphysics as well as orientation; polarized measurements thereby could benefit retrieval of cloud microphysical parameters.

  19. Le front oriental de Lille

    Directory of Open Access Journals (Sweden)

    Étienne Poncelet

    2011-06-01

    Full Text Available De la porte d’eau de la Basse Deûle jusqu’au fort Saint-Sauveur, le front oriental de Lille, fortifié à l’époque espagnole, glisse ses courtines dans les entrelacs du périphérique et des gares. L’enjeu urbain actuel consiste à s’appuyer sur ces murs historiques pour « passer malgré tout » à travers cet écheveau urbain et retisser les fils de la continuité des promenades au cœur de la ville. Moins connus que le front occidental de la reine des citadelles, ces anciens espaces militaires sont une chance pour l’urbanisme de demain dont les opérations en cours de la Porte de Gand et de la Basse Deûle témoignent déjà.The east wall, at Lille, fortified during the period of Spanish occupation, extends from the Porte d'Eau de la Basse-Deûle to the Saint-Sauveur fort. Its curtain walls emerge today in a landscape of ring roads and railway territories. The issue today is to profit from these historic walls in order to make some sense of the urban chaos and to reinstate some urban continuity in the city-centre walkways. Although they are not as well known as the western wall of this major fortified city, these former military properties are an exciting opportunity for tomorrow's town-planners, as the operations already underway at the Porte de Gand et de la Basse Deûle suggest.

  20. "Oriental anthropometry" in plastic surgery

    Directory of Open Access Journals (Sweden)

    Senna-Fernandes Vasco

    2008-01-01

    Full Text Available Background : According to Chinese medicine, the acupuncture-points′ (acupoints locations are proportionally and symmetrically distributed in well-defined compartment zones on the human body surface Oriental Anthropometry" (OA. Acupoints, if considered as aesthetic-loci, might be useful as reference guides in plastic surgery (PS. Aim: This study aimed to use aesthetic-loci as anatomical reference in surgical marking of Aesthetic Plastic Surgery. Method: This was an observational study based on aesthetic surgeries performed in private clinic. This study was based on 106 cases, comprising of 102 women and 4 men, with ages varying from 07 to 73 years, and with heights of between 1.34 m and 1.80 m. Patients were submitted to aesthetic surgical planning by relating aesthetic-loci to conventional surgical marking, including breast surgeries, abdominoplasty, rhytidoplasty, blepharoplasty, and hair implant. The aesthetic-surgical-outcome (ASO of the patients was assessed by a team of plastic surgeons (who were not involved in the surgical procedures over a follow-up period of one year by using a numeric-rating-scale in percentage (% terms. A four-point-verbal-rating-scale was used to record the patients′ opinion of therapeutic-satisfaction (TS. Results: ASO was 75.3 ± 9.4% and TS indicated that most patients (58.5% obtained "good" results. Of the remainder, 38.7% found the results "excellent", and 2.8% found them "fair". Discussion and Conclusion : The data suggested that the use of aesthetic-loci may be a useful tool for PS as an anatomical reference for surgical marking. However, further investigation is required to assess the efficacy of the OA by providing the patients more reliable balance and harmony in facial and body contours surgeries.

  1. Customer Orientation vs. Customer Orientation Perception : Case J & J Lakkapää Oy Tornio

    OpenAIRE

    Angeria, Heli

    2011-01-01

    Heli, Angeria 2011. Customer Orientation vs. Customer Orientation Perception. Case: J & J Lakkapää Oy Tornio. Kemi-Tornio University of Applied Sciences. Business and Culture. Pages 51. Appendices 5. The objective of this thesis is to study customer orientation with the help of a widely adapted Selling-Orientation-Customer Orientation (SOCO) scale, in order to find out what is the extent to which J & J Lakkapää Oy Tornio and its consumer customers agree or disagree about the company’s cus...

  2. Face perception is tuned to horizontal orientation in the N170 time window.

    Science.gov (United States)

    Jacques, Corentin; Schiltz, Christine; Goffaux, Valerie

    2014-02-07

    The specificity of face perception is thought to reside both in its dramatic vulnerability to picture-plane inversion and its strong reliance on horizontally oriented image content. Here we asked when in the visual processing stream face-specific perception is tuned to horizontal information. We measured the behavioral performance and scalp event-related potentials (ERP) when participants viewed upright and inverted images of faces and cars (and natural scenes) that were phase-randomized in a narrow orientation band centered either on vertical or horizontal orientation. For faces, the magnitude of the inversion effect (IE) on behavioral discrimination performance was significantly reduced for horizontally randomized compared to vertically or nonrandomized images, confirming the importance of horizontal information for the recruitment of face-specific processing. Inversion affected the processing of nonrandomized and vertically randomized faces early, in the N170 time window. In contrast, the magnitude of the N170 IE was much smaller for horizontally randomized faces. The present research indicates that the early face-specific neural representations are preferentially tuned to horizontal information and offers new perspectives for a description of the visual information feeding face-specific perception.

  3. On a randomly imperfect spherical cap pressurized by a random ...

    African Journals Online (AJOL)

    On a randomly imperfect spherical cap pressurized by a random dynamic load. ... In this paper, we investigate a dynamical system in a random setting of dual ... characterization of the random process for determining the dynamic buckling load ...

  4. Electroluminescence from completely horizontally oriented dye molecules

    Energy Technology Data Exchange (ETDEWEB)

    Komino, Takeshi [Education Center for Global Leaders in Molecular System for Devices, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Center for Organic Photonics and Electronics Research, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Japan Science and Technology Agency, ERATO, Adachi Molecular Exciton Engineering Project, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Sagara, Yuta [Center for Organic Photonics and Electronics Research, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Tanaka, Hiroyuki [Center for Organic Photonics and Electronics Research, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Department of Chemistry, Graduate School of Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Oki, Yuji [Japan Science and Technology Agency, ERATO, Adachi Molecular Exciton Engineering Project, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Department of Electronics, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Nakamura, Nozomi [Center for Organic Photonics and Electronics Research, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); International Institute for Carbon Neutral Energy Research (WPI-I2CNER), Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Fujimoto, Hiroshi [Center for Organic Photonics and Electronics Research, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Fukuoka i" 3-Center for Organic Photonics and Electronics Research (i3-OPERA), Fukuoka 819-0388 (Japan); and others

    2016-06-13

    A complete horizontal molecular orientation of a linear-shaped thermally activated delayed fluorescent guest emitter 2,6-bis(4-(10Hphenoxazin-10-yl)phenyl)benzo[1,2-d:5,4-d′] bis(oxazole) (cis-BOX2) was obtained in a glassy host matrix by vapor deposition. The orientational order of cis-BOX2 depended on the combination of deposition temperature and the type of host matrix. Complete horizontal orientation was obtained when a thin film with cis-BOX2 doped in a 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP) host matrix was fabricated at 200 K. The ultimate orientation of guest molecules originates from not only the kinetic relaxation but also the kinetic stability of the deposited guest molecules on the film surface during film growth. Utilizing the ultimate orientation, a highly efficient organic light-emitting diode with the external quantum efficiency of 33.4 ± 2.0% was realized. The thermal stability of the horizontal orientation of cis-BOX2 was governed by the glass transition temperature (T{sub g}) of the CBP host matrix; the horizontal orientation was stable unless the film was annealed above T{sub g}.

  5. Gender role, sexual orientation and suicide risk.

    Science.gov (United States)

    Fitzpatrick, Kathleen Kara; Euton, Stephanie J; Jones, Jamie N; Schmidt, Norman B

    2005-07-01

    There has been interest in the relationship between homosexuality, gender role and suicide risk. Though homosexuals are more likely to identify as cross-gender, research has not simultaneously examined sexual orientation and gender role in assessing suicide risk. In the current study, the unique and interactive effects of sexual orientation and gender role were assessed in regard to suicidal ideation, related psychopathology and measures of coping. 77 participants were recruited from an undergraduate psychology subject pool (n=47) or from gay, lesbian and transgender student organizations (n=30) and assessed on measures of gender role, homosexuality, and psychopathology. Consistent with expectations, cross-gender role (i.e., personality traits associated with the opposite sex) is a unique predictor of suicidal symptoms. Moreover, gender role accounted for more of the overall variance in suicidal symptoms, positive problem orientation, peer acceptance and support, than sexual orientation. After accounting for gender role, sexual orientation contributed little to the variance in suicidal symptoms, associated pathology and problem-solving deficits. There was no support for gender role by sexual orientation interaction effects. The cross-sectional nature of the data limits statements regarding causality. Cross-gendered individuals, regardless of sexual orientation, appear to have higher risk for suicidal symptoms. Researchers and clinicians should assess gender role in evaluations of youth samples.

  6. Physiological and biomechanical aspects of orienteering.

    Science.gov (United States)

    Creagh, U; Reilly, T

    1997-12-01

    Orienteering is an endurance running event which differs from other running sports both in its cognitive element and in the type of terrain encountered. The demands of overcoming this terrain are not manifest in significant differences between orienteers and road runners in somatotype, though elite female orienteers have consistently been shown to have higher levels of adiposity (> 19%) than elite road runners. High aerobic power in orienteers (up to 63 and 76 ml/kg/min in women and men, respectively) is coupled with lower anaerobic performance. While leg strength is generally not high when compared with other athletic specialties, female orienteers have relatively good leg flexion strength. The energy cost of running is greatly increased in rough terrain. Oxygen cost was 26% higher while running in a forest when compared with road running. Biomechanical differences in stride pattern contribute towards this increased demand. Despite the high energy demands during competition, orienteers pace themselves such that their mean heart rate remains within the range of 167 to 172 beats/min, despite large fluctuations. The rough terrain encountered in orienteering results not only in a high energy cost but also in a higher incidence of sport-specific injuries, particularly to the ankle. Minor injuries such as cuts and bruises are common during competition.

  7. Orientation aspects of growth during recrystallization

    International Nuclear Information System (INIS)

    Juul Jensen, D.

    1997-04-01

    Recrystallization of heavily cold rolled aluminium and copper is studied with the aim of achieving information about effects of crystallography orientation on the growth process. The potentials of several experimental techniques are analysed, and a method well suited for characterizing growth rates of grains with different orientations is developed. This method, which is referred to as the extended Cahn-Hagel method, is used for growth rate determinations in aluminium and copper deformed and annealed under five different conditions. In all the investigated cases, preferential growth of cube oriented grains is observed. Recrystallization models, which simulates the orientational as well as microstructural development, are described. selected models are applied for studies of recrystallization in aluminium and copper under specific deformation and annealing conditions as well as for more general studies of the effects of orientation dependent growth rates on the recrystallization microstructure and texture. Finally, reasons for the observed orientation dependent growth rates are discussed. A new mechanism, orientation pinning, is suggested and it is shown that this mechanism is necessary for the understanding of experimental results. (au) 4 tabs., 41 ills., 153 refs

  8. Orienteering World Cup hosted by CERN Club

    CERN Multimedia

    Katarina Anthony

    2010-01-01

    Elite runners took to the streets of Geneva for the last leg of the Orienteering World Cup, from 8-10 October. The Geneva finals were hosted by the CERN Orienteering Club and concluded months of competitions held across 5 countries.   Women's World-Cup winner, Simone Niggli (centre).  © Ilknur Colak The final events of the Orienteering World Cup took place in the Old Town of Geneva and Saint-Cergue, with runners following routes prepared by the CERN Orienteering Club. Orienteering is a sport of navigation, using only a compass, map and your sense of direction. The objective is to get to all the points on the map as quickly as possible, choosing your own paths as you run. This was the CERN club’s first successful participation in the World Cup, cementing its reputation as a fixture in the international orienteering world. Orienteering is not your typical Swiss pastime. Developed in Scandinavia, the sport has been gaining popularity internationally. “...

  9. Measuring Entrepreneurial Orientation in the Social Context

    Directory of Open Access Journals (Sweden)

    Rafał Kusa

    2016-09-01

    Full Text Available Objective: The objective of this paper is to identify differences between measurement of organisational entrepreneurship in for-profit and non-profit context and to propose the measures aligned to non-profit organisations. The main research question is whether the scales designed to measure entrepreneurial orientation can be used in non-profit organisations and under which conditions. Research Design & Methods: Research methodology is based on review of research tools and measurement scales related to organisational entrepreneurship and comparison of for-profit and non-profit organisations, as well as their characteristics in the context of entrepreneurial orientation. Findings: Entrepreneurial orientation can be measured in non-profit organisations using existing scales that have been designed for business organisations, however they have to be modified, mostly in the dimension of competitive aggressiveness and autonomy. Additionally, the scale should be enriched with items related to cooperation with other organisations. Implications & Recommendations: It is necessary to develop methods and tools that enable the measurement of entrepreneurial orientation in non-profit organisation as well as comparative research on entrepreneurial orientation in for-profit and non-profit organisations. Contribution & Value Added: The originality of this work lies in studying some aspects of entrepreneurial orientation, that apply to the social context. Some suggestions were formulated relating to the utilisation of entrepreneurial orientation scales (originally designed for business enterprises in non-profit organisations.

  10. Orientation aspects of growth during recrystallization

    Energy Technology Data Exchange (ETDEWEB)

    Juul Jensen, D.

    1997-04-01

    Recrystallization of heavily cold rolled aluminium and copper is studied with the aim of achieving information about effects of crystallography orientation on the growth process. The potentials of several experimental techniques are analysed, and a method well suited for characterizing growth rates of grains with different orientations is developed. This method, which is referred to as the extended Cahn-Hagel method, is used for growth rate determinations in aluminium and copper deformed and annealed under five different conditions. In all the investigated cases, preferential growth of cube oriented grains is observed. Recrystallization models, which simulates the orientational as well as microstructural development, are described. selected models are applied for studies of recrystallization in aluminium and copper under specific deformation and annealing conditions as well as for more general studies of the effects of orientation dependent growth rates on the recrystallization microstructure and texture. Finally, reasons for the observed orientation dependent growth rates are discussed. A new mechanism, orientation pinning, is suggested and it is shown that this mechanism is necessary for the understanding of experimental results. (au) 4 tabs., 41 ills., 153 refs.

  11. Blocked Randomization with Randomly Selected Block Sizes

    Directory of Open Access Journals (Sweden)

    Jimmy Efird

    2010-12-01

    Full Text Available When planning a randomized clinical trial, careful consideration must be given to how participants are selected for various arms of a study. Selection and accidental bias may occur when participants are not assigned to study groups with equal probability. A simple random allocation scheme is a process by which each participant has equal likelihood of being assigned to treatment versus referent groups. However, by chance an unequal number of individuals may be assigned to each arm of the study and thus decrease the power to detect statistically significant differences between groups. Block randomization is a commonly used technique in clinical trial design to reduce bias and achieve balance in the allocation of participants to treatment arms, especially when the sample size is small. This method increases the probability that each arm will contain an equal number of individuals by sequencing participant assignments by block. Yet still, the allocation process may be predictable, for example, when the investigator is not blind and the block size is fixed. This paper provides an overview of blocked randomization and illustrates how to avoid selection bias by using random block sizes.

  12. Orientation and direction-of-motion response in the middle temporal visual area (MT of New World owl monkeys as revealed by intrinsic-signal optical imaging

    Directory of Open Access Journals (Sweden)

    Peter M Kaskan

    2010-07-01

    Full Text Available Intrinsic-signal optical imaging was used to evaluate relationships of domains of neurons in visual area MT selective for stimulus orientation and direction of motion. Maps of activation were elicited in MT of owl monkeys by gratings drifting back-and-forth, flashed stationary gratings and unidirectionally drifting fields of random dots. Drifting gratings, typically used to reveal orientation preference domains, contain a motion component that may be represented in MT. Consequently, this stimulus could activate groups of cells responsive to the motion of the grating, its orientation or a combination of both. Domains elicited from either moving or static gratings were remarkably similar, indicating that these groups of cells are responding to orientation, although they may also encode information about motion. To assess the relationship between domains defined by drifting oriented gratings and those responsive to direction of motion, the response to drifting fields of random dots was measured within domains defined from thresholded maps of activation elicited by the drifting gratings. The optical response elicited by drifting fields of random dots was maximal in a direction orthogonal to the map of orientation preference. Thus, neurons in domains selective for stimulus orientation are also selective for motion orthogonal to the preferred stimulus orientation.

  13. Beginning C# Object-Oriented Programming

    CERN Document Server

    Clark, Dan

    2011-01-01

    Beginning C# Object-Oriented Programming brings you into the modern world of development as you master the fundamentals of programming with C# and learn to develop efficient, reusable, elegant code through the object-oriented programming (OOP) methodology. Take your skills out of the 20th century and into this one with Dan Clark's accessible, quick-paced guide to C# and object-oriented programming, completely updated for .NET 4.0 and C# 4.0. As you develop techniques and best practices for coding in C#, one of the world's most popular contemporary languages, you'll experience modeling a "real

  14. Three Object-Oriented enhancement for EPICS

    Science.gov (United States)

    Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.

    1994-12-01

    In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.

  15. Preferred orientation of ettringite in concrete fractures

    KAUST Repository

    Wenk, Hans-Rudolf

    2009-05-15

    Sulfate attack and the accompanying crystallization of fibrous ettringite [Ca6Al2(OH)12(SO4) 3·26H2O] cause cracking and loss of strength in concrete structures. Hard synchrotron X-ray microdiffraction is used to quantify the orientation distribution of ettringite crystals. Diffraction images are analyzed using the Rietveld method to obtain information on textures. The analysis reveals that the c axes of the trigonal crystallites are preferentially oriented perpendicular to the fracture surfaces. By averaging single-crystal elastic properties over the orientation distribution, it is possible to estimate the elastic anisotropy of ettringite aggregates. © 2009 International Union of Crystallography.

  16. Orientational diffusion of n-alkyl cyanides

    International Nuclear Information System (INIS)

    Zhu Xiang; Farrer, Richard A; Zhong Qin; Fourkas, John T

    2005-01-01

    Ultrafast optical Kerr effect spectroscopy has been used to study the temperature-dependent orientational dynamics of a series of nitriles with n-alkyl chains ranging from one to 11 carbons in length. In all cases the orientational diffusion is found to be described by a single-exponential decay. Analysis of the orientational correlation times using the Debye-Stokes-Einstein equation suggests that the molecules adopt extended configurations and reorient as rigid rods. The liquids with shorter alkyl chains undergo an apparent ordering transition as they are cooled

  17. Market-oriented search in differentiated industries

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Stieglitz, Nils

    2009-01-01

      How is the success of a firm's market-oriented activities influenced by the marketing mix? This paper contributes to existing marketing research by advancing our understanding of the process by which market orientation transforms into superior performance. This process is investigated...... on the basis of appropriate organizational search models drawn from the behavioral theory of the firm. Specifically, we draw on the NK model to develop testable propositions that substantiate and extend prior theoretical market orientation research. Our results provide new insight into organizational...... characteristics and consequences of responsive and proactive marketing behaviors, as well as the allocation of attention towards customers and competitors....

  18. FOOD ENTREPRENEUR SUSTAINABLE ORIENTATION AND FIRM PRACTICES

    Directory of Open Access Journals (Sweden)

    Mark A. Gagnon

    2016-10-01

    Full Text Available This exploratory research examines the relationship between food entrepreneur sustainable orientation, mindset and firm sustainable practices in a mixed methods format. In particular we seek to address if entrepreneur behavior and firm practices are congruent with founding entrepreneur espoused support of sustainability. Our survey findings with thirty specialty food entrepreneurs suggest tenuous empirical support for the relationship of entrepreneur sustainable orientation, mindset and firm sustainable practices. However our qualitative results indicate positive relationships between sustainable orientation, mindset and practices. Evidence from this work highlights the critical role of founding entrepreneurs for successful implementation of sustainability along its multiple fronts including profitability.

  19. Radiographic film orientation in radiotherapy dosimetry

    International Nuclear Information System (INIS)

    Suchowerska, N.; Davison, A.; Drew, J.; Metcalfe, P.

    1996-01-01

    Since the discovery of x-rays, film has been used as a detection medium for radiation. More recently radiographic film has become established as a practical tool for the measurement of dose distribution in radiotherapy. The accuracy and reproducibility of film dosimetry depends on photon energy, processing conditions and film plane orientation. The relationship between photon energy, processing conditions and film dosimetry accuracy has been studied. The role of film plane orientation is still controversial. The current work aims to clarify the effects film plane orientation has on film dosimetry. Poster 205. (author)

  20. An outline of object-oriented philosophy.

    Science.gov (United States)

    Harman, Graham

    2013-01-01

    This article summarises the principles of object-oriented philosophy and explains its similarities with, and differences from, the outlook of the natural sciences. Like science, the object-oriented position avoids the notion (quite common in philosophy) that the human-world relation is the ground of all others, such that scientific statements about the world would only be statements about the world as it is for humans. But unlike science, object-oriented metaphysics treats artificial, social, and fictional entities in the same way as natural ones, and also holds that the world can only be known allusively rather than directly.