Towards Signalling Maintenance Scheduling for European Railway Traffic Management System

DEFF Research Database (Denmark)

M. Pour, Shahrzad

signalling system. Therefore, the entire maintenance system needs to change from the previous system to the newest system, and hence, new optimisation techniques need to be established so as to facilitate managers in creating ideal maintenance strategies. The aim of this thesis is to develop new maintenance......The European Railway Traffic Management System (ERTMS) is the newest signalling standard that has been introduced in the railway industry. The aim of ERTMS is to ensure better signalling communication amongst various train systems, and hence, to help in attaining improved connectivity and commuting...... between European countries. In various countries across the world, there is a gradual shift from the current signalling systems to ERTMS. Amongst the European countries, Denmark was the first country to commence a full upgrading of its signalling system to ERTMS. A variety of maintenance requirements...

Burden of disease from road traffic and railway noise - a quantification of healthy life years lost in Sweden.

Science.gov (United States)

Eriksson, Charlotta; Bodin, Theo; Selander, Jenny

2017-11-01

Objectives National quantifications of the health burden related to traffic noise are still rare. In this study, we use disability-adjusted life-years (DALY) measure to assess the burden of disease from road traffic and railway noise in Sweden. Methods The number of DALY was assessed for annoyance, sleep disturbance, hypertension, myocardial infarction (MI) and stroke using a method previously implemented by the World Health Organization (WHO). Population exposure to noise was obtained from the Swedish Environmental Protection Agency and the Swedish Transport Administration. Data on disease occurrence were gathered from registers held by the National Board of Health and Welfare and Statistics Sweden. Disability weights (DW) and duration were based on WHO definitions. Finally, we used research-based exposure-response functions or relative risks to estimate disease attributable to noise in each exposure category. Results The number of DALY attributed to traffic noise in Sweden was estimated to be 41 033 years; 36 711 (90%) related to road traffic and 4322 (10%) related to railway traffic. The most important contributor to the disease burden was sleep disturbances, accounting for 22 218 DALY (54%), followed by annoyance, 12 090 DALY (30%), and cardiovascular diseases, 6725 DALY (16%). Conclusions Road traffic and railway noise contribute significantly to the burden of disease in Sweden each year. The total number of DALY should, however, be interpreted with caution due to limitations in data quality.

Research on noise and vibration reduction at DB to improve the environmental friendliness of railway traffic

Science.gov (United States)

Schulte-Werning, B.; Beier, M.; Degen, K. G.; Stiebel, D.

2006-06-01

One of the most prominent keywords relating to the environmental friendliness of railway traffic is noise reduction. Thus, the research and development programme "Low Noise Railway" of Deutsche Bahn (DB) is under way to treat the noise of the vehicles and infrastructure. The noise reduction of the trains and the rail/wheel system are being tackled within several projects. The direct noise experienced by railway-lineside residents due to train movements on the track can be reduced by minimising the sound radiation directly at the source. This is the first-choice solution, as it proves to be the most effective countermeasure regarding a cost-benefit relation. The limit values for the noise emission as specified in the technical specification for interoperability are an essential criterion to be confirmed during the procurement process of railway vehicles. A recently developed acoustical quality management scheme establishes systematic noise management to complete the vehicle procurement process in the phases of concept, design, construction and manufacturing. In freight traffic quiet railway wheels for block brake operation will play an important role in the future to meet the goal of a low-noise railway system. A first attempt to realise successfully the low-noise potential of such optimised wheels was performed, even if with mixed results. To show ways of reducing the noise of the cooling ventilation in locomotives, DB is a partner in a development project led by Siemens. A notable 8 dB(A) noise reduction was measured. Concerning bridge noise, a project was started based on an effective and cost-efficient combination of experiments and simulations in order to develop specifications for the construction of generic low-noise bridges.

A comprehensive model for the prediction of vibrations due to underground railway traffic: formulation and validation

International Nuclear Information System (INIS)

Costa, Pedro Alvares; Cardoso Silva, Antonio; Calçada, Rui; Lopes, Patricia; Fernandez, Jesus

2016-01-01

n this communication, a numerical approach for the prediction of vibrations induced in buildings due to railway traffic in tunnels is presented. The numerical model is based on the concept of dynamic sub structuring, being composed by three autonomous models to simulate the following main parts of the problem: i) generation of vibrations (train-track interaction); ii) propagation of vibrations (track - tunnel-ground system); iii) reception of vibrations (building coupled to the ground). The methodology proposed allows dealing with the three-dimensional characteristics of the problem with a reasonable computational effort [ 1 , 2 ] . After the brief description of the model, its experimental validation is performed. For that, a case study about vibrations inside of a building close to a shallow railway tunnel in Madrid are simulated and the experimental data [ 3 ] is compared with the predicted results [ 4 ]. Finally, the communication finishes with some insights about the potentialities and challenges of this numerical modelling approach on the prediction of the behavior of ancient structures subjected to vibrations induced by human sources (railway and road traffic, pile driving, etc)

Railway noise annoyance on the railway track in northwest slovakia.

Science.gov (United States)

Pultznerova, Alzbeta; Eva, Panulinova; Kucharova, Daniela; Argalasova, Lubica

2018-01-01

This paper describes an assessment of noise caused by railway traffic in a large high-loaded railway track in Northwest Slovakia. The measurements of noise levels generated by trains passing through residential neighborhoods were taken. Noise maps were also calculated showing noise pollution generated by the train traffic. In addition, the annoyance level and sleep disturbance of residents affected by railway noise were evaluated by a validated questionnaire on a pilot sample of 107 respondents living near the important railway track. The measurements indicated that the noise levels generated by the passage of the train were extremely high especially at night, clearly exceeding the nighttime limits of equivalent sound pressure level established by the Decree of the Slovak Ministry of Health (No.549/2007) (L Aeq  = 55 dB). Measurements at one point during the night exceeded the limit values of up to 17.4 dB. The residents reported feeling affected by the noise generated by passing trains, which caused irritability, headache, poor concentration, and insomnia. In addition, 19.64% of the residents claimed that nocturnal noise pollution was the most distressing. The results of bivariate analysis showed a higher risk of annoyance especially for railway noise [OR MH  = 7.80 (4.02-15.14)] and the noise from industry [OR MH  = 3.08 (1.72-5.50)] in the exposed location. The effects of railway traffic on annoyance/sleep and psychosocial well-being were evaluated in a few studies. In accordance with our results the railway noise mostly disturbs sleep and rest of the respondents. The pilot survey showed the importance of sleep and rest disturbance by railway noise and the possibilities of getting worse health condition in the future. Noise abatement measures and strategies should, therefore, be implemented in an effective and manageable way increasing the environmental advantages of rail transport.

Communication Technologies Support to Railway Infrastructure and Operations

DEFF Research Database (Denmark)

Sniady, Aleksander

GSM-Railways (GSM-R), which is state-of-the-art railway mobile communication technology, is gradually replacing legacy analogue radio systems. Although GSM-R is an unquestionable achievement in terms of European railway interoperability, from a telecommunication point of view, it is an obsolete...... are considered to replace GSM-R in the future. This thesis is focused on Long Term Evolution (LTE) as one of the most likely successors to GSM-R. As a technology designed for commercial purposes, LTE has to be investigated specifically in railway environment. Using computer-based simulations, the LTE network...... important railway applications: European Train Control System (ETCS) signalling and railway-specific voice communication. Therefore, LTE is technically capable of replacing GSM-R as the communication network for the European Rail Traffic Management System (ERTMS). Moreover, the simulation results show...

Wind farms' influences for traffic safety. Study of distance requirements for road traffic, railway traffic, sea traffic and air travel; Tuulivoimaloiden vaikutukset liikenneturvallisuuteen. Selvitys etaeisyysvaatimuksista tie-, rautatie-, meri- ja lentoliikenteen osalta

Energy Technology Data Exchange (ETDEWEB)

Hytoenen, K.; Harju, M.; Piispanen, J.; Haulos, S.

2012-11-15

As wind power projects, both design and implementation, have increased rapidly, wind power manufacturers have stated that infrastructure of traffic restricts and complicates implementation of wind power projects. Failure of wind farm and both snow and ice thrown from blades and tower are commonly thought to be dangerous for settlement and for road, railway and sea traffic. Based on the accessible information accidents, which are connected to wind farms, won't cause notable harm for outsiders. Majority of the human injury and fatal accidents concerns the personnel of the wind farm in implementation and operational phases, not outsiders. Purpose of this study has been to clarify how distances requirements in different forms of traffic in Finland differ from other countries that are included in this comparison, and to find grounds for possibly revising these guidelines. In Finland there are still longest distance requirements when placing wind farm nearby the main roads, even after Finnish Traffic Agency revised guidelines in 2012. Regarding roads, differences between all the countries were minor. Also distance requirements regarding railways differ relatively little. Sweden has shortest distance requirement. Distance requirements in Finland and Denmark have been reduced in past few years. Any of these countries have not stated actual defined distance requirements related for example to shipping channels or lanes. International Civil Aviation Organization ICAO has settled internationally rules for obstacle limitation surface nearby airports and marking flight obstacles. Countries have stated national aviation regulations according to these rules and for this reason these regulations are quite consistent. In this study distance requirements are recommended to be calculated for certain basis. In case of roads and railways a general minimum distance requirement is suggested to be 1 x wind farm overall height. Road owner is allowed to require higher distance for

Introducing gaming simulation in the Dutch railways

NARCIS (Netherlands)

Meijer, S.

2012-01-01

Innovation in the Dutch railways in the domain of capacity management and traffic control is increasingly difficult to implement because of the large interconnectedness of all processes and separation into different institutions and organizations. Meanwhile there is a push for quality improvements

Logistic system as an essential element of modern organization of railway passenger traffic

Directory of Open Access Journals (Sweden)

O.A. Khodoskina

2012-04-01

Full Text Available The role and place of passenger transport services in the modern structure of rail transportation is considered. The need for approach to rail passenger transport as a logistics system, which is characterized by a set of parameters corresponding to the concept of logistics system in general and taking into account the peculiarities of railway passenger transportation is determined. The features of formation of such a system, taking into account the generally accepted theoretical approach and the specifics of rail transport are also presented. The concept of logistic system for railway vehicles is given; its overall structure is reviewed. The structure of the particular transport is defined by rail freight and in passenger traffic. Is an example of a mathematical model of the logistics system of rail passenger services on the basis of sets of incoming and outgoing parameters is determined. The structure of technologic process for goods and passenger transportation by rail from the perspective of logistics is characterized.

Real-time Railway Traffic Management : Dispatching in complex, large and busy railway networks

NARCIS (Netherlands)

Corman, F.

2010-01-01

Railway is an important and sustainable transportation mode, which despite good potentials results in a limited attractiveness, mostly due to the perceived consequences of unreliability. In fact, busy railway networks with frequent and heterogeneous services are highly sensitive to delay

Features of formation of car-traffic in a regional transportation system in conditions the multi-agents organization of a railway transportation

Directory of Open Access Journals (Sweden)

Aleksandr Leonidovich Kazakov

2011-09-01

Full Text Available As a result of structural reform of Russian railways, a host of agents that provide customers with loading resources, especially wagons for transport by railway. These processes reduce in efficiency of the car fleet, increasing transportation costs, shortage of cars for many customers, an increase of empty runs and, as a result, a depletion of a number of sections of the network carrying capacity at a reduced total volume of rail traffic. The article describes the reasons for this situation due to the mismatch occurred heterogeneity of rolling stock to existing planning conditions and tariffs. It is also shown that the inefficiency of decentralized car fleet contributes to the predominance of tree-type network, and the importance of this factor in the new environment has increased substantially. To ensure the efficient operation of rail transport as a systemic industry, providing mass-haul transport, it is proposed for integration into a regional logistics. Freight terminals regional logistics transportation and distribution system (RLTRS is appropriate to create on the basis of major freight railway stations. Thus, the adaptation of planning car traffic volume and train formation to modern standards, the establishment of tariff incentives and long-term changes in network configuration are considered as a prerequisite for the transformation of local transport and technological systems on the network of Russian railways into the integrated transport and logistics systems.

The liberalisation of the railways in Europe

OpenAIRE

Trampus, Francesca

2000-01-01

It is certainly high time to talk about policy for the railways not only in the Russian Federation but also in Europe, where the railways are vital part of the Community transport sector and need to be promoted and revitalized, especially considering the increasing air-traffic and railroad congestion, the environmental problems, the traffic noise, the accidents and the growing opposition to the unchecked development of the new road infrastructure. Railtrack’s business is supported by state-fu...

Electrical railway transportation systems

CERN Document Server

Brenna, Morris; Zaninelli, Dario

2018-01-01

Allows the reader to deepen their understanding of various technologies for both fixed power supply installations of railway systems and for railway rolling stock. This book explores the electric railway systems that play a crucial role in the mitigation of congestion and pollution caused by road traffic. It is divided into two parts: the first covering fixed power supply systems, and the second concerning the systems for railway rolling stock. In particular, after a historical introduction to the framework of technological solutions in current use, the authors investigate electrification systems for the power supply of rail vehicles, trams, and subways. Electrical Railway Transportation Systems explores the direct current systems used throughout the world for urban and suburban transport, which are also used in various countries for regional transport. It provides a study of alternating current systems, whether for power supply frequency or for special railway frequency, that are used around the world for ...

Residential traffic noise exposure and vestibular schwannoma - a Danish case-control study

DEFF Research Database (Denmark)

Roswall, Nina; Stangerup, Sven-Eric; Cayé-Thomasen, Per

2017-01-01

of birth. Road and railway traffic noise at the residence was calculated for all present and historical addresses between 1987 and index date. Associations between traffic noise and risk for VS were estimated using conditional logistic regression, adjusted for education, disposable personal income...

Towards a real-time Structural Health Monitoring of railway bridges

OpenAIRE

Vagnoli, Matteo; Remenyte-Prescott, Rasa; Andrews, John

2017-01-01

More than 350,000 railway bridges are present on the European railway network, making them a key infrastructure of the whole railway network. Railway bridges are continuously exposed to changing environmental threats, such as wind, floods and traffic load, which can affect safety and reliability of the bridge. Furthermore, a problem on a bridge can affect the whole railway network by increasing the vulnerability of the geographic area, served by the railway network. In this paper a Bayesian B...

Traffic-days at Aalborg University 1996. Conference report 1

International Nuclear Information System (INIS)

Lahrmann, H.; Hald Pedersen, L.

1996-01-01

Volume 1 (of two volumes) of the report on the conference 'Traffic days '96' held at Aalborg University (Denmark) on August 19-20, 1996, contains the papers presented at the conference under the general headings of the role of the car in the transport system of the future, traffic models, urban planning and traffic, traffic control, traffic and the urban environment, traffic and emissions, freight transport and railways. (EG)

Model of traffic access mode and railway station choice of suburban railway system in Slovenia

Directory of Open Access Journals (Sweden)

Gregor RAK

2014-12-01

Full Text Available This article presents the establishment of a model of understanding the access mode and railway station choice of Slovenian passengers. Therefore, a model has been designed to predict the determination of existing decision making preferences of railway users about the access mode and railway station choice with a stated preference survey and face to face method. The target group in the survey were railway passengers in the suburban environment that use the rail for work and school purposes. The total number of respondents was 412. The survey showed that most passengers access the railway station with car (60,2%, by foot (26,2%, with public transport (bus – 8,3% and with bike (5,3%. Average distance to the station is 4,9 km, average time of access is 10,5 min. Upon exit most passengers walk to the final destination (84,5%, use the public transport (bus – 14,1%, car (1,2% or bike (0,2%. Average time from exit of the train to final destination is 13,1 min, average distance is 1,58 km.

Dataset Documentation for the ERTMS-Oriented Signalling Maintenance in the Danish Railway System

DEFF Research Database (Denmark)

M. Pour, Shahrzad

2017-01-01

This documentation provides information about the dataset generated as part of a PhD thesis (Towards Signalling Maintenance Scheduling Problem for European Railway Traffic Management System ) for the signaling maintenance of the Danish railway system . The data instances (M.Pour 2018a; M.Pour 2018b......) have been created for the purpose of adaptation to the newest railway signalling standard which is so called European Railway Traffic Management System(ERTMS). The chapter provides explanation of the different types of maintenance tasks in the ERTMS, followed by data definition. Furthermore...

Maintenance management of railway infrastructures based on reliability analysis

International Nuclear Information System (INIS)

Macchi, Marco; Garetti, Marco; Centrone, Domenico; Fumagalli, Luca; Piero Pavirani, Gian

2012-01-01

Railway infrastructure maintenance plays a crucial role for rail transport. It aims at guaranteeing safety of operations and availability of railway tracks and related equipment for traffic regulation. Moreover, it is one major cost for rail transport operations. Thus, the increased competition in traffic market is asking for maintenance improvement, aiming at the reduction of maintenance expenditures while keeping the safety of operations. This issue is addressed by the methodology presented in the paper. The first step of the methodology consists of a family-based approach for the equipment reliability analysis; its purpose is the identification of families of railway items which can be given the same reliability targets. The second step builds the reliability model of the railway system for identifying the most critical items, given a required service level for the transportation system. The two methods have been implemented and tested in practical case studies, in the context of Rete Ferroviaria Italiana, the Italian public limited company for railway transportation.

Mathematical model of optimal empty rail car distribution at railway transport nodes

Directory of Open Access Journals (Sweden)

Aleksandr RAKHMANGULOV

2014-09-01

Full Text Available At present there are two trends in the market of rail freight transportation in Russia: freight owners put forward higher demands to the transportation quality (promptness of delivery in an effort to reduce storage costs by means of reducing the size of freight shipment; the structure of railcar traffic volume of the railways of Russia is getting more complex due to the reduction of the average shipment size and due to the transfer of railcar fleet ownership to a large number of operating companies. These trends significantly complicate operational management supervision of railway stations and transport nodes. Application of typical data from the information system about the railcar location at the transportation node is not enough for the dispatchers to make the best decision concerning the car traffic management. The dispatcher traffic control service needs some software-based models of efficient railcar distribution. The article is concerned with the description and development of the mathematical model of empty railcar distribution for loading at the railway transport node; this model will take into account the requirements of railcar owners in terms of their cars application, the operating work level of railroad stations of the transportation node and the possibility of adding the groups of empty railcars to the transfer trains, clean-up trains and industrial railway trains operating on a tight schedule. The developed model and the software package were implemented in the information system of the industrial railway of the major metallurgical enterprise - OJSC «Magnitogorsk Metallurgical Works», which processes up to two thousand of railcars belonging to different owners. This model made it possible to reduce the labour intensity of dispatcher operation planning the empty railcar distribution for loading and reduce the total time the railcars spend in the enterprise railway system.

A Control Simulation Method of High-Speed Trains on Railway Network with Irregular Influence

International Nuclear Information System (INIS)

Yang Lixing; Li Xiang; Li Keping

2011-01-01

Based on the discrete time method, an effective movement control model is designed for a group of highspeed trains on a rail network. The purpose of the model is to investigate the specific traffic characteristics of high-speed trains under the interruption of stochastic irregular events. In the model, the high-speed rail traffic system is supposed to be equipped with the moving-block signalling system to guarantee maximum traversing capacity of the railway. To keep the safety of trains' movements, some operational strategies are proposed to control the movements of trains in the model, including traction operation, braking operation, and entering-station operation. The numerical simulations show that the designed model can well describe the movements of high-speed trains on the rail network. The research results can provide the useful information not only for investigating the propagation features of relevant delays under the irregular disturbance but also for rerouting and rescheduling trains on the rail network. (general)

Evaluation of the Favourable Ecological Impact of the Railway on the Environment

Directory of Open Access Journals (Sweden)

Jasna Golubić

2012-10-01

Full Text Available The railway has advantages over other branches of longdistancetransportation from the ecological, economic, safety,and technological point of view.The paper gives an evaluation of the favourable influenceof railway traffic on the environment reflected in the rationalenergy consumption, significantly reduced need of physicalspace, and reduced air pollution.Having these data in mind, the railway is considered tohave a negligible influence on environmental pollution. However,studying even such small amounts plays a significant rolein the traffic safety and in the lives of people and nature itself

Diurnally varying annoyance due to railway and road traffic noise; Laermbelaestigung durch Strassen- und Schienenverkehr zu unterschiedlichen Tageszeiten

Energy Technology Data Exchange (ETDEWEB)

Schreckenberg, D. [Zentrum fuer Angewandte Psychologie, Umwelt- und Sozialforschung (ZEUS GmbH), Bochum (Germany); Guski, R. [Ruhr-Univ. Bochum, Fakultaet fuer Psychologie, Bochum (Germany)

2005-07-01

One of the most prominent non-auditory effects of noise influencing the life quality of human beings is the disturbance of activities (i.e. communicating, relaxing, working, sleeping). The disturbance of activities results in noise annoyance, and in the long run may lead to further health effects. Due to the fact that activities vary diurnally it is plausible to assume that peoples'' responses to noise differ depending on the times of day. The aim of the study, which is part of the German research network ''Quiet Traffic'' is to provide empirical data of dose-response relationships for different times of day (excluding the night). 1110 residents from four areas with dominant road traffic noise (683 subjects) and from two areas with dominant railway noise (427 subjects) have been asked in a face-to-face interview for contentment with house and living environment and noise reactions. 131 persons of the total sample took part in an additional study (experience-sampling study) in which the hourly noise annoyance was measured for three consecutive days using a handheld computer. For each subject individual source-specific immission noise level for each hour of the day has been calculated. There is higher annoyance due to road traffic noise in the late afternoon/evening from 4 pm to 7 pm. For railway noise higher annoyance is reported in the evening from 6 pm to 10 am. The reported differences in noise annoyance depending on the times of day are higher with increasing noise level. (orig.)

Application of data clustering to railway delay pattern recognition

DEFF Research Database (Denmark)

Cerreto, Fabrizio; Nielsen, Bo Friis; Nielsen, Otto Anker

2018-01-01

K-means clustering is employed to identify recurrent delay patterns on a high traffic railway line north of Copenhagen, Denmark. The clusters identify behavioral patterns in the very large (“big data”) data sets generated automatically and continuously by the railway signal system. The results re...

Life cycle assessment of railways and rail transports - Application in environmental product declarations (EPDs) for the Bothnia Line

Energy Technology Data Exchange (ETDEWEB)

Stripple, Haakan; Uppenberg, Stefan

2010-09-15

Environmental aspects are today highly important issues in the transport sector especially from a society perspective. Most likely, our society is facing considerable changes in the transport sector due to changes in the energy/environmental situation in the future. Strategic decisions concerning the development of the transport sector must be based on solid facts concerning both the transport infrastructure and the transport traffic on the infrastructure. The transport infrastructure is often complex and difficult to analyse but of great interest in a society perspective. In this project, we have performed a comprehensive view of a modern railway infrastructure system including the traffic on the infrastructure. A Life Cycle Assessment (LCA) methodology has been used for the study and several LCA models of the railway system have been designed. Due to the complexity of the models, several general railway component models have been developed. The component models can then be integrated to form a large model of an entire railway system. The component models (sub-models) are: 'Railway track foundation model', 'Railway track model', 'Railway electric power and control system model', 'Railway tunnel model', 'Railway bridge model', 'Railway passenger station and freight terminal model', 'Passenger and freight train model including train operation'. The LCA models have then been used to analyse the environmental performance of the Bothnia Line and to develop Environmental Product Declarations (EPDs) for the Bothnia Line

Past and future of a regional railway network in Mezohegyes (Hungary area

Directory of Open Access Journals (Sweden)

Brigitta ZSOTER

2011-01-01

Full Text Available The role of railway network in the internal passenger and heavy traffic is continuously decreasing. Regarding the number of passengers, proportion of the railway out of the internal passenger transport was more than 20% less in 2000. The railway passenger transportation suffered a setback in shorter distances in the last decades. In case of railway transportation of goods both the carriage distance and the quantity of goods have decreased. Content of the load has changed, too. Comparing to the previous one, quantity of the transported building materials, metal waste, ores and coal etc. lessened. In contrast with it proportion of agricultural products, machines has increased. It is worth examining the changes in connection with the passenger and heavy traffic in the last few years not only in country level but in the level of several settlements, as well. In settlements’ life a transportation route of the infrastructural sphere plays an important role. In this essay it is aiming to examine the changes in railway traffic of town Mezohegyes, a settlement on the Southern part of the Hungarian Plain, between 1990 and 2006. Research work of this kind has been carried out about town Mezohegyes earlier.

Efficient Development and Verification of Safe Railway Control Software

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan

2013-01-01

the monitoring process; hydraulic absorbers as dampers to dissipate the energy of oscillations in railway electric equipment; development of train fare calculation and adjustment systems using VDM++; efficient development and verification of safe railway control software; and evolution of the connectivity...

Communication and Sensemaking in the Dutch Railway System: Explaining coordination failure between teams using a mixed methods approach

NARCIS (Netherlands)

D. Schipper (Danny); L.M. Gerrits (Lasse)

2017-01-01

textabstractEarly in 2014, the Dutch railway system spiralled out of control after traffic management was confronted with the decision to take four double switches and two rail tracks out of service. A lack of coordination between the responsible teams resulted in the decision to stop all traffic in

Traffic and transport technology-road, railway, and water-borne transportation

Science.gov (United States)

1990-01-01

This is "Part 2: Case Studies - Chapter 9" of the book, "The Japanese Experience in Technology", and includes the following subsections: Modernization and the railway; The transportation network; Issues in railway policy; Original design and producti...

Railway line capacity consumption of different railway signalling systems under scheduled and disturbed conditions

NARCIS (Netherlands)

Goverde, R.M.P.; Corman, F.; D'Ariano, A.

2013-01-01

This paper evaluates the capacity consumption on a Dutch railway line both under scheduled and disturbed traffic conditions. For the scheduled condition the standard UIC compression method is used, while the computation of capacity consumption under disturbed conditions requires multiple simulation

Model for Railway Infrastructure Management Organization

Directory of Open Access Journals (Sweden)

Gordan Stojić

2012-03-01

Full Text Available The provision of appropriate quality rail services has an important role in terms of railway infrastructure: quality of infrastructure maintenance, regulation of railway traffic, line capacity, speed, safety, train station organization, the allowable lines load and other infrastructure parameters.The analysis of experiences in transforming the railway systems points to the conclusion that there is no unique solution in terms of choice for institutional rail infrastructure management modes, although more than nineteen years have passed from the beginning of the implementation of the Directive 91/440/EEC. Depending on the approach to the process of restructuring the national railway company, adopted regulations and caution in its implementation, the existence or absence of a clearly defined transport strategy, the willingness to liberalize the transport market, there are several different ways for institutional management of railway infrastructure.A hybrid model for selection of modes of institutional rail infrastructure management was developed based on the theory of artificial intelligence, theory of fuzzy sets and theory of multicriteria optimization.KEY WORDSmanagement, railway infrastructure, organizational structure, hybrid model

The present condition and projection of construction of railway net of the Danube-Morava corridor

Directory of Open Access Journals (Sweden)

Vemić Mirčeta

2005-01-01

Full Text Available The railway net of the Danube-Morava corridor, together with the road net represent the central section of the Pan-European transport corridor X. According to the traffic and economic standards, the railway net represents the second main traffic direction of this corridor as the area-functioning system of the territory of Serbia. Main railway lines have favourable positions as they are located along prominent geographical features, namely river valleys thus enabling considerable flow of goods, passengers and information. The paper presents some characteristics of the present condition of the railway net, its functioning and safety, with certain ideas of its future construction and expected exploitation till 2015. Traffic infrastructure represents the initial factor of overall development of a state and its connection with the surrounding countries. It is considered to be of strategic importance for a country to built railway net. Improvement and additional construction of railway lines is of the greatest priority for the purpose of enlargement of overall mobility and quality of life of population, to make urban areas closer, to improve connections, functions efficiency and level of services of railway system, reduction of negative influence on other economic systems and human environment, better safety etc.

Diagnosis diagrams for passing signals on an automatic block signaling railway section

Science.gov (United States)

Spunei, E.; Piroi, I.; Chioncel, C. P.; Piroi, F.

2018-01-01

This work presents a diagnosis method for railway traffic security installations. More specifically, the authors present a series of diagnosis charts for passing signals on a railway block equipped with an automatic block signaling installation. These charts are based on the exploitation electric schemes, and are subsequently used to develop a diagnosis software package. The thus developed software package contributes substantially to a reduction of failure detection and remedy for these types of installation faults. The use of the software package eliminates making wrong decisions in the fault detection process, decisions that may result in longer remedy times and, sometimes, to railway traffic events.

H∞ control of railway vehicle suspension with MR damper using scaled roller rig

International Nuclear Information System (INIS)

Shin, Yu-Jeong; You, Won-Hee; Hur, Hyun-Moo; Park, Joon-Hyuk

2014-01-01

In this paper, a magneto-rheological (MR) damper was applied to the secondary suspension to reduce the vibration of a car body. The control performance of the MR damper was verified by numerical analysis with a 1/5 scale railway vehicle model in accordance with the similarity law. The analysis results were then validated in tests. In particular, the objective of the study was to understand how the control performance affected the dynamic characteristics of a railway vehicle and to systematically analyze the relationship between control performance and dynamic characteristics depending on various running speeds. To achieve this, experimental results for the dynamic characteristics of the scaled MR damper designed for the 1/5 scale railway vehicle model were applied to the railway vehicle model. The H ∞ control method was applied to the controller. The means of designing the railway vehicle body vibration controller and the effectiveness of its results were studied. (paper)

Intelligent control for braking-induced longitudinal vibration responses of floating-type railway bridges

Science.gov (United States)

Qu, Wei-Lian; Qin, Shun-Quan; Tu, Jian-Weia; Liu, Jia; Zhou, Qiang; Cheng, Haibin; Pi, Yong-Lin

2009-12-01

This paper presents an intelligent control method and its engineering application in the control of braking-induced longitudinal vibration of floating-type railway bridges. Equations of motion for the controlled floating-type railway bridges have been established based on the analysis of the longitudinal vibration responses of floating-type railway bridges to train braking and axle-loads of moving trains. For engineering applications of the developed theory, a full-scale 500 kN smart magnetorheologic (MR) damper has been designed, fabricated and used to carry out experiments on the intelligent control of braking-induced longitudinal vibration. The procedure for using the developed intelligent method in conjunction with the full-scale 500 kN MR dampers has been proposed and used to control the longitudinal vibration responses of the deck of floating-type railway bridges induced by train braking and axle-loads of moving trains. This procedure has been applied to the longitudinal vibration control of the Tian Xingzhou highway and railway cable-stayed bridge over the Yangtze River in China. The simulated results have shown that the intelligent control system using the smart MR dampers can effectively control the longitudinal response of the floating-type railway bridge under excitations of braking and axle-loads of moving trains.

Intelligent control for braking-induced longitudinal vibration responses of floating-type railway bridges

International Nuclear Information System (INIS)

Qu, Wei-Lian; Tu, Jian-Weia; Liu, Jia; Zhou, Qiang; Qin, Shun-Quan; Cheng, Haibin; Pi, Yong-Lin

2009-01-01

This paper presents an intelligent control method and its engineering application in the control of braking-induced longitudinal vibration of floating-type railway bridges. Equations of motion for the controlled floating-type railway bridges have been established based on the analysis of the longitudinal vibration responses of floating-type railway bridges to train braking and axle-loads of moving trains. For engineering applications of the developed theory, a full-scale 500 kN smart magnetorheologic (MR) damper has been designed, fabricated and used to carry out experiments on the intelligent control of braking-induced longitudinal vibration. The procedure for using the developed intelligent method in conjunction with the full-scale 500 kN MR dampers has been proposed and used to control the longitudinal vibration responses of the deck of floating-type railway bridges induced by train braking and axle-loads of moving trains. This procedure has been applied to the longitudinal vibration control of the Tian Xingzhou highway and railway cable-stayed bridge over the Yangtze River in China. The simulated results have shown that the intelligent control system using the smart MR dampers can effectively control the longitudinal response of the floating-type railway bridge under excitations of braking and axle-loads of moving trains

Estimating national exhaust emissions from railway vehicles in Turkey

International Nuclear Information System (INIS)

Dincer, Faruk; Elbir, Tolga

2007-01-01

The estimated exhaust emissions from railway vehicles in Turkey were presented. The emissions of nitrogen oxides (NO x ), hydrocarbon compounds (HC), carbon monoxide (CO), particulate matter (PM), sulfur dioxide (SO 2 ) and carbon dioxide (CO 2 ) from the diesel locomotives and railcars were calculated using the railway traffic data recorded by Turkish State Railways (TSR) for the period of 2000-2005. EPA emission factors were used for different vehicle types and operation modes such as shunting and line-hauling. Total emissions from railway vehicles in Turkey were estimated as 384 t y - 1 for HC, 1016 t y - 1 for CO, 6799 t y - 1 for NO X , 256 t y - 1 for PM, 357 t y - 1 for SO 2 and 383 537 t y - 1 for CO 2 for the year 2005. The distribution of emissions with respect to type of railway vehicles shows that the mainline locomotives contribute ∝ 91% to the total emissions. The increases of 22%, 39% and 49% in the current numbers of mainline locomotives, shunting locomotives and diesel railcars, respectively corresponding to the full capacity of railway network in Turkey will increase the annual emissions to 431 t y - 1 for HC, 1121 t y - 1 for CO, 7399 t y - 1 for NO X , 342 t y - 1 for PM, 552 t y - 1 for SO 2 and 420 256 t y - 1 for CO 2 . Total railway emissions constitute 0.15%, 0.08% and 4.21% of total Turkish traffic emissions for HC, CO and NO X , respectively. (author)

Model petri net of adaptive traffic lights and its collaboration with a special event

Directory of Open Access Journals (Sweden)

Tristono Tomi

2018-01-01

Full Text Available Traffic lights have an important role as the system control of vehicles flow on the urban network. Commonly, most countries still using fixed time strategy. Our research proposes the adaptive traffic lights model to response the traffic demand. It uses basic Petri net as a general modeling framework. Foractuating method of minimum and maximum green signal time interval, the green traffic lights have three-time extension units. Next, we collaborate on a case of the existence of railways that crosses on the southern arm of an intersection. We introduce both of collaboration model design of traffic lights and the railway's gate which always closes while a train passing. Verification and validation of the model are based on the simulation result of vehicles queue. The collaboration model design of traffic lights has excellent performance, and it can resolve the congestion problem better than conventional schedule.

Price Analysis of Railway Freight Transport under Marketing Mechanism

Science.gov (United States)

Shi, Ying; Fang, Xiaoping; Chen, Zhiya

Regarding the problems in the reform of the railway tariff system and the pricing of the transport, by means of assaying the influence of the price elasticity on the artifice used for price, this article proposed multiple regressive model which analyzed price elasticity quantitatively. This model conclude multi-factors which influences on the price elasticity, such as the averagely railway freight charge, the averagely freight haulage of proximate supersede transportation mode, the GDP per capita in the point of origin, and a series of dummy variable which can reflect the features of some productive and consume demesne. It can calculate the price elasticity of different classes in different domains, and predict the freight traffic volume on different rate levels. It can calculate confidence-level, and evaluate the relevance of each parameter to get rid of irrelevant or little relevant variables. It supplied a good theoretical basis for directing the pricing of transport enterprises in market economic conditions, which is suitable for railway freight, passenger traffic and other transportation manner as well. SPSS (Statistical Package for the Social Science) software was used to calculate and analysis the example. This article realized the calculation by HYFX system(Ministry of Railways fund).

A methodology for evaluating environmental impacts of railway freight transportation policies

International Nuclear Information System (INIS)

Lopez, Ignacio; Rodriguez, Javier; Buron, Jose Manuel; Garcia, Alberto

2009-01-01

Railway freight transportation presents a degree of complexity which frequently makes impossible to model it with sufficient precision. Currently, energetic and environmental impacts of freight transportation are usually modelled following average data, which do not reflect the characteristics of specific lines. These models allow qualitative approximations which may be used as criteria for designing high-level transportation policies: road-train modal shift, regional energetic planning or environmental policies. This paper proposes a methodology for estimating railway consumption associated to a specific railway line which yields a new degree of precision. It is based on estimating different contributions to railway consumption by a collection of factors, mobility, operation, or infrastructure-related. This procedure also allows applying the methodology for designing transportation policies in detail: evaluating impact of modal shift, consumption and pollutant emissions on a specific line, as well as the effect of building tunnels, reducing slopes, improving traffic control, etc. A comparison of the estimations given by the conventional approach and the proposed methodology is offered, as well as further comments on the results.

An Improved Walk Model for Train Movement on Railway Network

International Nuclear Information System (INIS)

Li Keping; Mao Bohua; Gao Ziyou

2009-01-01

In this paper, we propose an improved walk model for simulating the train movement on railway network. In the proposed method, walkers represent trains. The improved walk model is a kind of the network-based simulation analysis model. Using some management rules for walker movement, walker can dynamically determine its departure and arrival times at stations. In order to test the proposed method, we simulate the train movement on a part of railway network. The numerical simulation and analytical results demonstrate that the improved model is an effective tool for simulating the train movement on railway network. Moreover, it can well capture the characteristic behaviors of train scheduling in railway traffic. (general)

Effective Development and Verification of Railway Control Software

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth

2011-01-01

This document presents a method for effective development of software for a product line of similar railway control systems. The software is constructed in three steps: first a specifications in a domain-specific language is created, then a formal behavioural controller model is automatically...

Distributed optical fiber sensors for integrated monitoring of railway infrastructures

Science.gov (United States)

Minardo, Aldo; Coscetta, Agnese; Porcaro, Giuseppe; Giannetta, Daniele; Bernini, Romeo; Zeni, Luigi

2014-05-01

We propose the application of a distributed optical fiber sensor based on stimulated Brillouin scattering, as an integrated system for safety monitoring of railway infrastructures. The strain distribution was measured dynamically along a 60 meters length of rail track, as well as along a 3-m stone arch bridge. The results indicate that distributed sensing technology is able to provide useful information in railway traffic and safety monitoring.

Noise-induced hearing loss in a longitudinal study of Norwegian railway workers.

Science.gov (United States)

Lie, Arve; Skogstad, Marit; Johnsen, Torstein Seip; Engdahl, Bo; Tambs, Kristian

2016-09-02

The aim of this study was to analyse longitudinal data to assess the risk of noise-induced hearing loss (NIHL) in Norwegian railway workers. Longitudinal. A major Norwegian railway company. We examined data from the first and last audiograms for the period 1991-2014, from 9640 railway workers with varying occupational noise exposure and with an average observation period of 10 years. The course of hearing acuity in seven groups of railway workers (train drivers, conductors, bus drivers, traffic controllers, train maintenance workers, track maintenance workers and others) were compared with each other and with ISO standards (ISO 1999). The change in hearing threshold during the observation period was 2-3 dB in the 0.5-4 kHz range and 6-7 dB in the 3-6 kHz range adjusted for age and sex, for all occupational groups, which is slightly less than expected (8 dB) according to ISO 1999. The risk of NIHL in Norwegian railway workers during the period 1991-2014 has been negligible. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Automatic Railway Traffic Object Detection System Using Feature Fusion Refine Neural Network under Shunting Mode

Directory of Open Access Journals (Sweden)

Tao Ye

2018-06-01

Full Text Available Many accidents happen under shunting mode when the speed of a train is below 45 km/h. In this mode, train attendants observe the railway condition ahead using the traditional manual method and tell the observation results to the driver in order to avoid danger. To address this problem, an automatic object detection system based on convolutional neural network (CNN is proposed to detect objects ahead in shunting mode, which is called Feature Fusion Refine neural network (FR-Net. It consists of three connected modules, i.e., the depthwise-pointwise convolution, the coarse detection module, and the object detection module. Depth-wise-pointwise convolutions are used to improve the detection in real time. The coarse detection module coarsely refine the locations and sizes of prior anchors to provide better initialization for the subsequent module and also reduces search space for the classification, whereas the object detection module aims to regress accurate object locations and predict the class labels for the prior anchors. The experimental results on the railway traffic dataset show that FR-Net achieves 0.8953 mAP with 72.3 FPS performance on a machine with a GeForce GTX1080Ti with the input size of 320 × 320 pixels. The results imply that FR-Net takes a good tradeoff both on effectiveness and real time performance. The proposed method can meet the needs of practical application in shunting mode.

76 FR 59482 - The New Brunswick Railway Company-Continuance in Control Exemption-Maine Northern Railway Company...

Science.gov (United States)

2011-09-26

... requirements of 49 U.S.C. 11323-25, for Eastern Maine Railway, a Class III rail common carrier to continue in... Exemption-- Montreal, Maine & Atlantic Railway, Ltd.; Maine Northern Railway Company--Modified Rail...

Delay propagation and process management at railway stations

NARCIS (Netherlands)

Goverde, R.M.P.; Hansen, I.A.

2001-01-01

Process operators at large railway stations have the difficult task to secure a fluent train traffic flow while minimizing deviations from established timetables. Variation in actual train departure times is inevitable due to many circumstances such as arrival delays and fluctuations in alighting

Railway noise reduction by the application of CHFC material on the rail

Directory of Open Access Journals (Sweden)

Brigita ALTENBAHER

2015-06-01

Full Text Available Traffic is the most widespread source of environmental noise. Railway noise has become increasingly common in urban areas in the past few decades. Therefore environmental requirements for railway operations regarding noise are becoming very strict and will become even tighter in future. In the present paper we present actual track-based field test performed on Slovenian Railways. The significant noise reduction (up to 30dBA was achieved by the application of CHFC material on the rail using CL-E1 top anti noise system.

Leukemia and brain tumors in Norwegian railway workers, a nested case-control study.

Science.gov (United States)

Tynes, T; Jynge, H; Vistnes, A I

1994-04-01

In an attempt to assess whether exposure to electromagnetic fields on Norwegian railways induces brain tumors or leukemia, the authors conducted a nested case-control study of railway workers based on incident cases from the Cancer Registry of Norway in a cohort of 13,030 male Norwegian railway workers who had worked on either electric or non-electric railways. The cohort comprised railway line, outdoor station, and electricity workers. The case series comprised 39 men with brain tumors and 52 men with leukemia (follow-up, 1958-1990). Each case was matched on age with four or five controls selected from the same cohort. The exposure of each study subject to electric and magnetic fields was evaluated from cumulative exposure measures based on present measurements and historical data. Limited information on potential confounders such as creosote, solvents, and herbicides was also collected; information on whether the subject had smoked was obtained by interviews with the subjects or work colleagues. The case-control analysis showed that men employed on electric railways, compared with non-electric ones, had an odds ratio for leukemia of 0.70 (adjusted for smoking) and an odds ratio for brain tumor of 0.87. No significant trend was shown for exposure to either magnetic or electric fields. These results do not support an association between exposure to 16 2/3-Hertz electric or magnetic fields and the risk for leukemia or brain tumors.

Comparison of Annoyance from Railway Noise and Railway Vibration.

Science.gov (United States)

Ögren, Mikael; Gidlöf-Gunnarsson, Anita; Smith, Michael; Gustavsson, Sara; Persson Waye, Kerstin

2017-07-19

The aim of this study is to compare vibration exposure to noise exposure from railway traffic in terms of equal annoyance, i.e., to determine when a certain noise level is equally annoying as a corresponding vibration velocity. Based on questionnaire data from the Train Vibration and Noise Effects (TVANE) research project from residential areas exposed to railway noise and vibration, the dose response relationship for annoyance was estimated. By comparing the relationships between exposure and annoyance for areas both with and without significant vibration exposure, the noise levels and vibration velocities that had an equal probability of causing annoyance was determined using logistic regression. The comparison gives a continuous mapping between vibration velocity in the ground and a corresponding noise level at the facade that are equally annoying. For equivalent noise level at the facade compared to maximum weighted vibration velocity in the ground the probability of annoyance is approximately 20% for 59 dB or 0.48 mm/s, and about 40% for 63 dB or 0.98 mm/s.

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

Science.gov (United States)

Zong, Lu-Hang; Gong, Xing-Long; Xuan, Shou-Hu; Guo, Chao-Yang

2013-05-01

In this paper, semi-active H∞ control with magnetorheological (MR) dampers for railway vehicle suspension systems to improve the lateral ride quality is investigated. The proposed semi-active controller is composed of a H∞ controller as the system controller and an adaptive neuro-fuzzy inference system (ANFIS) inverse MR damper model as the damper controller. First, a 17-degree-of-freedom model for a full-scale railway vehicle is developed and the random track irregularities are modelled. Then a modified Bouc-Wen model is built to characterise the forward dynamic characteristics of the MR damper and an inverse MR damper model is built with the ANFIS technique. Furthermore, a H∞ controller composed of a yaw motion controller and a rolling pendulum motion (lateral motion+roll motion) controller is established. By integrating the H∞ controller with the ANFIS inverse model, a semi-active H∞ controller for the railway vehicle is finally proposed. Simulation results indicate that the proposed semi-active suspension system possesses better attenuation ability for the vibrations of the car body than the passive suspension system.

INTELLECTUAL MODEL FORMATION OF RAILWAY STATION WORK DURING THE TRAIN OPERATION EXECUTION

Directory of Open Access Journals (Sweden)

O. V. Lavrukhin

2014-11-01

Full Text Available Purpose. The aim of this research work is to develop an intelligent technology for determination of the optimal route of freight trains administration on the basis of the technical and technological parameters. This will allow receiving the operational informed decisions by the station duty officer regarding to the train operation execution within the railway station. Metodology. The main elements of the research are the technical and technological parameters of the train station during the train operation. The methods of neural networks in order to form the self-teaching automated system were put in the basis of the generated model of train operation execution. Findings. The presented model of train operation execution at the railway station is realized on the basis of artificial neural networks using learning algorithm with a «teacher» in Matlab environment. The Matlab is also used for the immediate implementation of the intelligent automated control system of the train operation designed for the integration into the automated workplace of the duty station officer. The developed system is also useful to integrate on workplace of the traffic controller. This proposal is viable in case of the availability of centralized traffic control on the separate section of railway track. Originality. The model of train station operation during the train operation execution with elements of artificial intelligence was formed. It allows providing informed decisions to the station duty officer concerning a choice of rational and a safe option of reception and non-stop run of the trains with the ability of self-learning and adaptation to changing conditions. This condition is achieved by the principles of the neural network functioning. Practical value. The model of the intelligent system management of the process control for determining the optimal route receptionfor different categories of trains was formed.In the operational mode it offers the possibility

LTE Micro-cell Deployment for High-Density Railway Areas

DEFF Research Database (Denmark)

Sniady, Aleksander; Kassab, Mohamed; Soler, José

2014-01-01

Long Term Evolution (LTE) is a serious candidate for the future releases of the European Rail Traffic Management System (ERTMS). LTE offers more capacity and supports new communication-based applications and services for railways. Nevertheless, even with this technology, the classical macro...

An innovative localisation algorithm for railway vehicles

Science.gov (United States)

Allotta, B.; D'Adamio, P.; Malvezzi, M.; Pugi, L.; Ridolfi, A.; Rindi, A.; Vettori, G.

2014-11-01

In modern railway automatic train protection and automatic train control systems, odometry is a safety relevant on-board subsystem which estimates the instantaneous speed and the travelled distance of the train; a high reliability of the odometry estimate is fundamental, since an error on the train position may lead to a potentially dangerous overestimation of the distance available for braking. To improve the odometry estimate accuracy, data fusion of different inputs coming from a redundant sensor layout may be used. The aim of this work has been developing an innovative localisation algorithm for railway vehicles able to enhance the performances, in terms of speed and position estimation accuracy, of the classical odometry algorithms, such as the Italian Sistema Controllo Marcia Treno (SCMT). The proposed strategy consists of a sensor fusion between the information coming from a tachometer and an Inertial Measurements Unit (IMU). The sensor outputs have been simulated through a 3D multibody model of a railway vehicle. The work has provided the development of a custom IMU, designed by ECM S.p.a, in order to meet their industrial and business requirements. The industrial requirements have to be compliant with the European Train Control System (ETCS) standards: the European Rail Traffic Management System (ERTMS), a project developed by the European Union to improve the interoperability among different countries, in particular as regards the train control and command systems, fixes some standard values for the odometric (ODO) performance, in terms of speed and travelled distance estimation. The reliability of the ODO estimation has to be taken into account basing on the allowed speed profiles. The results of the currently used ODO algorithms can be improved, especially in case of degraded adhesion conditions; it has been verified in the simulation environment that the results of the proposed localisation algorithm are always compliant with the ERTMS requirements

ON OPERATION OF 740 M LONG FREIGHT TRAINS ON CZECH TEN-T RAILWAY NETWORK

Directory of Open Access Journals (Sweden)

Michal Drábek

2016-09-01

Full Text Available Regulation (EU No 1315/2013 defines actual scope of core and comprehensive TEN-T network, including both networks for railway freight transport. For the core network, possibility to operate 740 m long freight trains is required. The aim of this paper is to analyse availability of appropriate overtaking tracks for 740 m long freight trains. Due to ETCS braking curves and odometry, such trains, after ETCS implementation, will require 780-800 m long overtaking tracks. For practical reasons (e.g. bypass lines, whole Czech railway TEN-T network is analysed. The overtaking track, whose occupation means influence on scheduled traffic or threat to boarding passengers, are excluded. The data was collected from station schemes from Collection of Official Requisites for 2015/16 Timetable, issued by SŽDC, Czech state Infrastructure Manager. Most of appropriate tracks are over 800 m long, but their density in the network and in particular directions varies considerably. For freight traffic, gradient of the line is important, so in the resulting figure, there are marked significant peaks for particular lines as well. Czech TEN-T lines are further segmented on the basis of number of tracks and their traffic character. Then, specific issues on overtaking or crossing of 740 m long freight trains are discussed. As a conclusion, for long-term development of Czech TEN-T lines, targeted investment is recommended not only for passenger railway, but also for freight railway. An attractive capacity offer for railway undertakings, which can stimulate freight traffic on European Rail freight corridors, can be represented by network-bound periodic freight train paths with suitable long overtaking tracks outside bottlenecks. After the overtaking by passenger trains, a freight train should run without stop through large node station or a bottleneck area. Before the sections with high gradients, coupling of additional locomotives should be connected with the overtaking

Analysis of the process related to the operations management of the rail traction vehicles in JSC 'Serbian Railways'

Directory of Open Access Journals (Sweden)

Vukadinović Vojislav

2016-01-01

Full Text Available In the study, issues related to the operations management in railway were elaborated, with special emphasis on the operations management of rail vehicles and main parameters in its activities and in the railway functioning. The analysis of the current status, operation and functioning of the Serbian Railways was also provided, with a special focus on the study of the technical condition regarding exploitation, reliability, and availability of traction vehicles operation which is always actual and particularly important for ensuring the regular and safe functioning of train traffic in all railways in the world as well as in the railway of Serbia. The issue related to the exploitation reliability and availability regarding traction vehicles operation is also being analyzed which is reflected in development of the concept and creation of the methodology for assessment of the technical condition and indicators for determining the level of exploitation reliability, availability of the traction vehicle operation as well as functioning of train traffic and the models related to the operations management of rail traction vehicles.

Occupational Stress and Hypertension among Railway Loco Pilots and Section Controllers

OpenAIRE

Jayakumar, Devasigamoney

2017-01-01

Introduction: A cross-sectional study on occupational stress was conducted on loco pilots in 2008, in view of loco pilots being one of the high strain jobs in Indian Railways. Subsequently, a comparative cross-sectional study on occupational stress was conducted among section controllers in 2011, which is another high strain job of Indian Railways. Objective: The studies were conducted to analyze and compare occupational stress and hypertension. Setting and Design: A cross-sectional study on ...

Examining nocturnal railway noise and aircraft noise in the field: sleep, psychomotor performance, and annoyance.

Science.gov (United States)

Elmenhorst, Eva-Maria; Pennig, Sibylle; Rolny, Vinzent; Quehl, Julia; Mueller, Uwe; Maaß, Hartmut; Basner, Mathias

2012-05-01

Traffic noise is interfering during day- and nighttime causing distress and adverse physiological reactions in large parts of the population. Railway noise proved less annoying than aircraft noise in surveys which were the bases for a so called 5 dB railway bonus regarding noise protection in many European countries. The present field study investigated railway noise-induced awakenings during sleep, nighttime annoyance and the impact on performance the following day. Comparing these results with those from a field study on aircraft noise allowed for a ranking of traffic modes concerning physiological and psychological reactions. 33 participants (mean age 36.2 years ± 10.3 (SD); 22 females) living alongside railway tracks around Cologne/Bonn (Germany) were polysomnographically investigated. These data were pooled with data from a field study on aircraft noise (61 subjects) directly comparing the effects of railway and aircraft noise in one random subject effects logistic regression model. Annoyance was rated in the morning evaluating the previous night. Probability of sleep stage changes to wake/S1 from railway noise increased significantly from 6.5% at 35 dB(A) to 20.5% at 80 dB(A) LAFmax. Rise time of noise events had a significant impact on awakening probability. Nocturnal railway noise led to significantly higher awakening probabilities than aircraft noise, partly explained by the different rise times, whereas the order was inversed for annoyance. Freight train noise compared to passenger train noise proved to have the most impact on awakening probability. Nocturnal railway noise had no effect on psychomotor vigilance. Nocturnal freight train noise exposure in Germany was associated with increased awakening probabilities exceeding those for aircraft noise and contrasting the findings of many annoyance surveys and annoyance ratings of our study. During nighttime a bonus for railway noise seems not appropriate. Copyright © 2012 Elsevier B.V. All rights reserved.

Formal Development and Verification of a Distributed Railway Control System

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan

1999-01-01

In this article we introduce the concept for a distributed railway control system and present the specification and verification of the main algorithm used for safe distributed control. Our design and verification approach is based on the RAISE method, starting with highly abstract algebraic...

Formal Development and Verification of a Distributed Railway Control System

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan

1998-01-01

In this article we introduce the concept for a distributed railway control system and present the specification and verification of the main algorithm used for safe distributed control. Our design and verification approach is based on the RAISE method, starting with highly abstract algebraic spec...

Air traffic control activity increases attention capacity in air traffic controllers.

Science.gov (United States)

Ribas, Valdenilson Ribeiro; Martins, Hugo André de Lima; Amorim, Gutemberg Guerra; Ribas, Renata de Melo Guerra; de Almeida, Cláudia Ângela Vilela; Ribas, Valéria Ribeiro; de Vasconcelos, Carlos Augusto Carvalho; Lima, Murilo Duarte Costa; Sougey, Everton Botelho; de Castro, Raul Manhães

2010-01-01

Air traffic controllers simultaneously develop complex and multiple tasks in the course of their activities. In this context, concern is raised over the high level of attention needed by these professionals which can ultimately be affected by stress and fatigue. The objective of this study was to assess attention level in air traffic controllers (ATCo). 45 flight protection professionals were evaluated, comprising 30 ATCo, subdivided into ATCo with ten or more years in the profession (ATCo≥10, n=15) and ATCo with less than ten years in the profession (ATCo air traffic control activity after ten years may be associated with a high level of attention.

Sustainable railway bridges with higher axle loads:monitoring examples from northern Sweden

OpenAIRE

Elfgren, Lennart; Enochsson, Ola; Täljsten, Björn; Paulsson, Björn

2007-01-01

Monitoring of several railway bridges has been carried out in northern Sweden in order to increase the allowable axle load. The work is part of a European Integrated Project "Sustainable Bridges - Assessment for Future Traffic Demands and Longer Lives". The paper describes the project and gives some examples of applications. Monitoring of several railway bridges has been carried out in northern Sweden in order to increase the allowable axle load. The work is part of a European Integrated P...

VoLTE performance in railway scenarios

DEFF Research Database (Denmark)

Sniady, Aleksander; Sønderskov, Morten; Soler, José

2015-01-01

GSM-Railways (GSM-R) is the current standard for railway voice and data communication. GSM-R provides railway specific voice services, such as Railway Emergency Call (REC). GSM-R provides also the European Train Control System (ETCS), which offers in-cab signaling and Automatic Train Protection...... (ATP). Despite these features and services, GSM-R has various major shortcomings. Therefore, alternative technologies are considered to replace GSM-R and become the next generation railway mobile communication network. 3GPP Long Term Evolution (LTE) is a likely candidate for GSM-R replacement. LTE...... is more efficient, flexible and offers much higher capacity, which allows the railway network to provide new communication-based applications for railways. Most of the research on LTE in railways has been focused on data-based railway applications (ETCS signaling and other). Nevertheless, voice...

VoLTE Performance in Railway Scenarios

DEFF Research Database (Denmark)

Sniady, Aleksander; Sønderskov, Morten; Soler, José

2015-01-01

GSM-Railways (GSM-R) is the current standard for railway voice and data communication. GSM-R provides railway specific voice services, such as Railway Emergency Call (REC). GSM-R provides also the European Train Control System (ETCS), which offers in-cab signaling and Automatic Train Protection...... (ATP). Despite these features and services, GSM-R has various major shortcomings. Therefore, alternative technologies are considered to replace GSM-R and become the next generation railway mobile communication network. 3GPP Long Term Evolution (LTE) is a likely candidate for GSM-R replacement. LTE...... is more efficient, flexible and offers much higher capacity, which allows the railway network to provide new communication-based applications for railways. Most of the research on LTE in railways has been focused on data-based railway applications (ETCS signaling and other). Nevertheless, voice...

Developing noise control strategies for entire railway networks

Science.gov (United States)

Oertli, Jakob

2006-06-01

The EU Environmental Noise Directive (2002/49) requires member states to deliver noise maps to the commission by 2007 and action plans by 2008 both for agglomerations as well as for major roads, railways and airports. Noise mitigation projects resulting from action plans are usually very expensive and therefore may threaten the economic viability of the railways in the current harsh competitive transport market, thus hindering sustainable transport policies. It is therefore of vital interest that the action plans and the resulting projects are designed in the most cost-effective way possible. The EU and Union of Railways (UIC) sponsored project Strategies and Tools to Assess and Implement noise Reducing measures for Railway Systems (STAIRRS) recognized this need and developed a tool, with which such optimal solutions can be obtained for entire railway networks. Since data collection is the most expensive part of the analysis, noise mapping data is ideally collected in such a way that it can be used for the calculation of the different scenarios, from which the most cost-effective action plans are chosen. The paper shows how the STAIRRS tool is used for this purpose and how cost-effectiveness considerations have led to optimal railway noise mitigation strategies in Switzerland and have given a basis for noise related decision making in Luxembourg.

Sweden goes in for railways - an example to Norway

International Nuclear Information System (INIS)

Killingland, Tore

2004-01-01

It is a sad fact that in their 150th anniversary, with very few exceptions, the Norwegian railways still use the first generation network, which dates back to the late 1800s. Off course, this puts the train at a serious disadvantage in the competition with cars and buses, which run on a third or four generation network of roads. The Norwegian Parliament has cut down on the fuel tax for the road traffic. They might have used this tax to provide much more environmentally friendly transport facilities. Green taxes are a proper means of adapting society to a sustainable way of using energy. The article contrasts the Norwegian policy with the Swedish one. The Swedes are preparing to invest twice as much in railways as in roads for the period of 2004 - 2015, while in Norway three times as much money will be spent on roads as on railways. Politicians in Norway essentially agree to concentrate on the railway, but they do not do it. Conservationists expect a clear change of course in the communications policy, with Sweden as a model

Intelligent Traffic Light Based on PLC Control

Science.gov (United States)

Mei, Lin; Zhang, Lijian; Wang, Lingling

2017-11-01

The traditional traffic light system with a fixed control mode and single control function is contradicted with the current traffic section. The traditional one has been unable to meet the functional requirements of the existing flexible traffic control system. This paper research and develop an intelligent traffic light called PLC control system. It uses PLC as control core, using a sensor module for receiving real-time information of vehicles, traffic control mode for information to select the traffic lights. Of which control mode is flexible and changeable, and it also set the countdown reminder to improve the effectiveness of traffic lights, which can realize the goal of intelligent traffic diversion, intelligent traffic diversion.

Railway Reform in China.

OpenAIRE

Wu, J. H.; Nash, C.

1998-01-01

The purpose of this working paper is to consider the current situation of Chinese Railways, the progress of reforms to date, and possible future developments. The first section describes the current problems of Chinese Railways, as a vast organisation subject to strong central control, facing enormous and rapidly growing demands which it is unable to satisfy. The progress of reform in Chinese Railways to date, and in particular the Economic Contract Responsibility System instituted in the lat...

Experimental Analysis of Stiffness of the Riveted Steel Railway Bridge Deck Members’ Joints

Directory of Open Access Journals (Sweden)

Gocál Jozef

2014-12-01

Full Text Available The paper deals with the real behaviour of the riveted steel railway bridge deck members’ connections with respect to their bending stiffness. Attention is paid to the stringer-to-cross beam connection as well as the cross beam-to-main girder connection. The stiffness of the two connections is investigated on the basis of evaluation of the experimentally determined stress response of the observed structural members to the actual traffic load on an existing railway bridge.

76 FR 63991 - Midwest Rail d/b/a Toledo, Lake Erie and Western Railway-Lease and Operation Exemption-Toledo...

Science.gov (United States)

2011-10-14

... provide common carrier rail service over the Line, connecting with and interchanging traffic with NSR, and... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35555] Midwest Rail d/b/a... Railway and Museum, Inc. Midwest Rail d/b/a Toledo, Lake Erie and Western Railway (Toledo), a noncarrier...

Study of Drivers’ Behaviour at a Passive Railway Crossing

Directory of Open Access Journals (Sweden)

Sandra Kasalica

2012-05-01

Full Text Available Problem: The number of killed and injured persons in incidents at railway level crossings is generally increasing on the Serbian Railways, particularly at passive crossings. In this paper we researched the direct behaviour of road traffic participants at a conventional railway passive crossing. Method: Direct observational study of drivers’ behaviour at a level crossing. Results: Sixty-one road vehicle drivers were observed in the moments of train approach. The probability of crossing varies depending on the train distance and the time the driver has to cross the crossing. The drivers who have limited visibility cannot estimate the speed of the approaching train well and make more risky decisions. Conclusion: This study shows that the number of “risky crossings” is worrying as the result of such crossings is a large number of accidents with fatal consequences at the passive crossings in Serbia.

75 FR 29805 - CSX Transportation, Inc. and Delaware and Hudson Railway Company, Inc.-Joint Use Agreement

Science.gov (United States)

2010-05-27

... attach a document and otherwise comply with the instructions found on the Board's website at `` www.stb... Syracuse and Huntingdon, Que. CSXT interchanges this cross-border rail traffic with Canadian National Railway Company (CN) at Huntingdon, with CN handling the traffic to and from the Montreal terminal area...

Comparison of Community Annoyance from Railway Noise Evaluated by Different Category Scales

Science.gov (United States)

Yano, T.; Yamashita, T.; Izumi, K.

1997-08-01

A considerable number of reviews on community responses to noise have been carried out to compare dose-response relationships obtained from different noise sources and to investigate the effects of various factors on noise annoyance by using the data from different surveys. In order to compare the findings from various surveys precisely, it is very important to know how the different subjective or objective scales are transformed to unified scale. The present paper discusses the effect of four kinds of category scale on the annoyance response by using the data obtained from a social survey on community response to railway noise and compares the dose-response relationships between railway and road traffic noise obtained with the same scale. The extent of annoyance, such as % very annoyed, is strongly affected by the descriptors just below the annoyance range. This means that the descriptors are very important in constructing questionnaires and comparing the findings of different surveys. No systematic difference is found in dose-response relationships between railway and road traffic noises, using data obtained with the same method in the same area. This finding is quite different from those of European studies.

Simulation of traffic control signal systems

Science.gov (United States)

Connolly, P. J.; Concannon, P. A.; Ricci, R. C.

1974-01-01

In recent years there has been considerable interest in the development and testing of control strategies for networks of urban traffic signal systems by simulation. Simulation is an inexpensive and timely method for evaluating the effect of these traffic control strategies since traffic phenomena are too complex to be defined by analytical models and since a controlled experiment may be hazardous, expensive, and slow in producing meaningful results. This paper describes the application of an urban traffic corridor program, to evaluate the effectiveness of different traffic control strategies for the Massachusetts Avenue TOPICS Project.

Traffic days '95 at AUC. Conference report. Vol. 1

International Nuclear Information System (INIS)

Lohmann-Hansen, A.

1995-01-01

Volume one of Traffic days '95 at AUC (Aalborg University, Denmark) contains 28 papers presented at the conference held on August 21 - 22, 1995, at Aalborg University in Jutland, Denmark. The papers in this volume are ranged under the general headings of: The road to sustainable transport, the evaluation of traffic and infrastructure planning - decision-making procedures, traffic and the environment in towns, railways, traffic information + signals, and environmental conditions relative to shipping

Model Predictive Control for Integrating Traffic Control Measures

NARCIS (Netherlands)

Hegyi, A.

2004-01-01

Dynamic traffic control measures, such as ramp metering and dynamic speed limits, can be used to better utilize the available road capacity. Due to the increasing traffic volumes and the increasing number of traffic jams the interaction between the control measures has increased such that local

Examining perimeter gating control of urban traffic networkswith locally adaptive traffic signals

NARCIS (Netherlands)

Keyvan Ekbatani, M.; Gao, X.; Gayah, V.V.; Knoop, V.L.

2015-01-01

Traditionally, urban traffic is controlled by traffic lights. Recent findings of the Macroscopic or Network Fundamental Diagram (MFD or NFD) have led to the development of novel traffic control strategies that can be applied at a networkwide level. One pertinent example is perimeter flow control

Formal Development and Verification of Railway Control Systems - In the context of ERTMS/ETCS Level 2

DEFF Research Database (Denmark)

Vu, Linh Hong

This dissertation presents a holistic, formal method for efficient modelling and verification of safety-critical railway control systems that have product line characteristics, i.e., each individual system is constructed by instantiating common generic applications with concrete configuration dat...... standardized railway control systems ERTMS/ETCS Level 2. Experiments showed that the method can be used for specification, verification and validation of systems of industrial size....

Impact of service quality management (SQM) practices on Indian railways : study of South Central Railways.

Science.gov (United States)

2010-09-01

The main objective of this study is to present a framework developed for assisting Railways to monitor and : control the quality of services provided to passengers. The study evaluated the passenger Rail Service quality of : Indian Railways by develo...

Controlled Blasting for Deconstruction of a Railway Bridge Near Sahibganj

Science.gov (United States)

Mandal, S. K.; Ghosh, A. K.; Oraon, S.

2018-06-01

Some of the Indian Railway bridges require reconstruction for electrification and expansion of railway tracks. Dismantling of bridge within time schedule in densely populated area requires controlled and pre-planned blasting methodology for safe pulling down of the structure and quick removal of blasted debris for fast restoration of tracks and smooth plying of trains. The three arched railway bridge (Bridge No. 61) located between Sahibganj and Karamtola cases one such example where the bridge was dismantled and the track was restored within 4 h of blasting, though the stipulated block period for demolition and restoration of tracks was 6 h. The 25.48 m long three-arched bridge was drilled and blasted with 225 number of blastholes (32 mm diameter) and 100 kg explosive (25 mm diameter). Length of blastholes varied between 0.5 and 1.8 m with blast geometry of 0.3-0.35 m burden and 0.33 m spacing. This paper deals with the conceptual and theoretical model developed for identification of the key locations for drilling and implementation of the same. It also discusses about the precautionary measures and the drilling pattern adopted for quick demolition and speedy restoration of tracks.

Controlled Blasting for Deconstruction of a Railway Bridge Near Sahibganj

Science.gov (United States)

Mandal, S. K.; Ghosh, A. K.; Oraon, S.

2018-02-01

Some of the Indian Railway bridges require reconstruction for electrification and expansion of railway tracks. Dismantling of bridge within time schedule in densely populated area requires controlled and pre-planned blasting methodology for safe pulling down of the structure and quick removal of blasted debris for fast restoration of tracks and smooth plying of trains. The three arched railway bridge (Bridge No. 61) located between Sahibganj and Karamtola cases one such example where the bridge was dismantled and the track was restored within 4 h of blasting, though the stipulated block period for demolition and restoration of tracks was 6 h. The 25.48 m long three-arched bridge was drilled and blasted with 225 number of blastholes (32 mm diameter) and 100 kg explosive (25 mm diameter). Length of blastholes varied between 0.5 and 1.8 m with blast geometry of 0.3-0.35 m burden and 0.33 m spacing. This paper deals with the conceptual and theoretical model developed for identification of the key locations for drilling and implementation of the same. It also discusses about the precautionary measures and the drilling pattern adopted for quick demolition and speedy restoration of tracks.

Pedestrian Friendly Traffic Signal Control.

Science.gov (United States)

2016-01-01

This project continues research aimed at real-time detection and use of pedestrian : traffic flow information to enhance adaptive traffic signal control in urban areas : where pedestrian traffic is substantial and must be given appropriate attention ...

CATS-based Air Traffic Controller Agents

Science.gov (United States)

Callantine, Todd J.

2002-01-01

This report describes intelligent agents that function as air traffic controllers. Each agent controls traffic in a single sector in real time; agents controlling traffic in adjoining sectors can coordinate to manage an arrival flow across a given meter fix. The purpose of this research is threefold. First, it seeks to study the design of agents for controlling complex systems. In particular, it investigates agent planning and reactive control functionality in a dynamic environment in which a variety perceptual and decision making skills play a central role. It examines how heuristic rules can be applied to model planning and decision making skills, rather than attempting to apply optimization methods. Thus, the research attempts to develop intelligent agents that provide an approximation of human air traffic controller behavior that, while not based on an explicit cognitive model, does produce task performance consistent with the way human air traffic controllers operate. Second, this research sought to extend previous research on using the Crew Activity Tracking System (CATS) as the basis for intelligent agents. The agents use a high-level model of air traffic controller activities to structure the control task. To execute an activity in the CATS model, according to the current task context, the agents reference a 'skill library' and 'control rules' that in turn execute the pattern recognition, planning, and decision-making required to perform the activity. Applying the skills enables the agents to modify their representation of the current control situation (i.e., the 'flick' or 'picture'). The updated representation supports the next activity in a cycle of action that, taken as a whole, simulates air traffic controller behavior. A third, practical motivation for this research is to use intelligent agents to support evaluation of new air traffic control (ATC) methods to support new Air Traffic Management (ATM) concepts. Current approaches that use large, human

A Formal Approach for the Construction and Verification of Railway Control Systems

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, Jan; Kinder, Sebastian

2011-01-01

This paper describes a complete model-based development and verification approach for railway control systems. For each control system to be generated, the user makes a description of the application-specific parameters in a domain-specific language. This description is automatically transformed...

Traffic light control by multiagent reinforcement learning systems

NARCIS (Netherlands)

Bakker, B.; Whiteson, S.; Kester, L.; Groen, F.C.A.; Babuška, R.; Groen, F.C.A.

2010-01-01

Traffic light control is one of the main means of controlling road traffic. Improving traffic control is important because it can lead to higher traffic throughput and reduced traffic congestion. This chapter describes multiagent reinforcement learning techniques for automatic optimization of

Traffic Light Control by Multiagent Reinforcement Learning Systems

NARCIS (Netherlands)

Bakker, B.; Whiteson, S.; Kester, L.J.H.M.; Groen, F.C.A.

2010-01-01

Traffic light control is one of the main means of controlling road traffic. Improving traffic control is important because it can lead to higher traffic throughput and reduced traffic congestion. This chapter describes multiagent reinforcement learning techniques for automatic optimization of

Controlled Traffic Farming

OpenAIRE

Controlled Traffic Farming Europe

2011-01-01

Metadata only record Controlled Traffic Farming (CTF) is a farming method used to reduce soil compaction, decrease inputs, and improve soil structure when coupled with reduced-till or no-till practices. This practices utilizes permanent traffic/wheel zones to limit soil compaction to a specific area. This website provides practical information on CTF, case studies, workshops, and links to additional resources.

GPR Laboratory Tests For Railways Materials Dielectric Properties Assessment

Directory of Open Access Journals (Sweden)

Francesca De Chiara

2014-10-01

Full Text Available In railways Ground Penetrating Radar (GPR studies, the evaluation of materials dielectric properties is critical as they are sensitive to water content, to petrographic type of aggregates and to fouling condition of the ballast. Under the load traffic, maintenance actions and climatic effects, ballast condition change due to aggregate breakdown and to subgrade soils pumping, mainly on existing lines with no sub ballast layer. The main purpose of this study was to validate, under controlled conditions, the dielectric values of materials used in Portuguese railways, in order to improve the GPR interpretation using commercial software and consequently the management maintenance planning. Different materials were tested and a broad range of in situ conditions were simulated in laboratory, in physical models. GPR tests were performed with five antennas with frequencies between 400 and 1800 MHz. The variation of the dielectric properties was measured, and the range of values that can be obtained for different material condition was defined. Additionally, in situ GPR measurements and test pits were performed for validation of the dielectric constant of clean ballast. The results obtained are analyzed and the main conclusions are presented herein.

30 CFR 56.9100 - Traffic control.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Traffic control. 56.9100 Section 56.9100 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Dumping Traffic Safety § 56.9100 Traffic control. To provide for the safe movement of self-propelled...

A Two-Stage Fuzzy Logic Control Method of Traffic Signal Based on Traffic Urgency Degree

OpenAIRE

Yan Ge

2014-01-01

City intersection traffic signal control is an important method to improve the efficiency of road network and alleviate traffic congestion. This paper researches traffic signal fuzzy control method on a single intersection. A two-stage traffic signal control method based on traffic urgency degree is proposed according to two-stage fuzzy inference on single intersection. At the first stage, calculate traffic urgency degree for all red phases using traffic urgency evaluation module and select t...

Residential exposure to traffic noise and leisure-time sports - A population-based study.

Science.gov (United States)

Roswall, Nina; Ammitzbøll, Gunn; Christensen, Jeppe Schultz; Raaschou-Nielsen, Ole; Jensen, Steen Solvang; Tjønneland, Anne; Sørensen, Mette

2017-08-01

Traffic levels have been found a significant environmental predictor for physical inactivity. A recent study suggested that traffic noise annoyance was associated with lower physical activity. We investigated associations between modelled residential traffic noise and leisure-time sports. In the Diet, Cancer and Health cohort, we performed cross-sectional analyses using data from the baseline questionnaire (1993-97), and longitudinal analyses of change between baseline and follow-up (2000-02). People reported participation (yes/no) and hours of leisure-time sport, from which we calculated MET hrs/week. Present and historical addresses from 1987 to 2002 were found in national registries, and traffic noise was modelled 1 and 5 years before enrolment, and from baseline to follow-up. Analyses were performed using logistic and linear regression. Traffic noise exposure 5 years before baseline was associated with higher prevalence odds ratio of non-participation in leisure-time sports; significantly for road traffic noise (odds ratio (OR): 1.10; 95% confidence interval (CI): 1.07-1.13) and borderline for railway noise (OR: 1.03; 95% CI: 0.99-1.07), per 10dB. In longitudinal analyses, a 10dB higher road traffic noise was associated with a higher prevalence odds ratio of ceasing (OR: 1.12; 95% CI: 1.07-1.18) and a lower prevalence odds ratio of initiating (OR: 0.92; 95% CI: 0.87-0.96) leisure-time sports. Exposure to railway noise was negatively associated with baseline MET hrs/week, whereas no association was found in longitudinal analyses, or for road traffic noise. The study suggests that long-term exposure to residential road traffic noise is negatively associated with leisure-time sports. Results for railway noise were less consistent. Copyright © 2017 Elsevier GmbH. All rights reserved.

Opportunity to Save Historical Railway Infrastructure - Adaptation and Functional Conversion of Facilities

Science.gov (United States)

Podwojewska, Magdalena

2017-10-01

After years of neglect and underinvestment, the Polish railways are now witnessing a rapid modernization of both their technical facilities and rolling stock. However, this is true only of the main railway lines connecting major urban complexes. It is worth pointing out that a great number of secondary lines, railway stations and halts still has not been covered by the transformation process. Railway facilities, warehouses and service features are in decay. Rapid technological developments have caused numerous architectural structures of historical interest and service features to fall out of use. There are historical railway facilities dating back to the late 19th or early 20th centuries, whose condition is constantly deteriorating. The only way to save these structures is to change the manner, in which they are being used, and attract new investors and operators. The adaptation of buildings may be carried out in a number of ways by following different strategies. The process depends on the structure’s current condition and significance for the railway network. The facilities which are disused as a result of technological changes in the rolling stock and infrastructure include workshops, steam locomotive bays, turntables and warehouses. Their size and location within a city make them a perfect place for commercial services, exhibitions, heritage sites, concerts and other events attracting great numbers of people. Other strategies may be used for constructions located next to railways lines, whose role has declined. Such constructions include small railway stations, warehouses, reloading and forwarding facilities, railway ramps, railway staff buildings as well as residences for railway employees. Railway stations located at large junctions can handle passenger traffic or freight loading operations. As well as acting as the only window to the world, railway stations in small towns housed all the services available in the place. At the same time, they served as

Building collaboration? Co-location and territoriality in a railway control center

NARCIS (Netherlands)

Willems, T.A.H.; van Marrewijk, A.H.

2017-01-01

This paper studies the design of co-located spaces and how organizational actors experience such spaces. The literature on co-location is ambiguous about how reduced physical distance increases collaboration. To address this problem, we draw on an ethnographic study of a co-located railway control

Analysis of Traffic Safety Factors at Level Rail-Road Crossings

Directory of Open Access Journals (Sweden)

Tomislav Mlinarić

2012-10-01

Full Text Available The paper analyses the main factors of traffic safety andreliabilityat level crossings. The number and causes of accidentsare stated, that result from ignorance, insufficient training ofthe traffic participants, their ilnsponsibility and insufficient orincomplete legislation, as well as from insufficiently professionaland scientifically not serious enough approach to solvingthis cardinal problem in road and railway traffic. Based on theanalysis the causes are determined and solutions proposed, aswell as more efficient methods to improve safety and reduce thenumber of traffic accidents at level crossings.

75 FR 21718 - Canadian National Railway Company and Grand Trunk Corporation-Control-EJ&E West Company 1

Science.gov (United States)

2010-04-26

... headquarters in Washington, DC. The purpose of the hearing is for Canadian National Railway Company (CN) to... Railway Company and Grand Trunk Corporation-- Control--EJ&E West Company \\1\\ \\1\\ This decision also... Room on the first floor of the Board's headquarters at Patriot's Plaza, 395 E Street, SW., Washington...

An overview of natural hazard impacts to railways and urban transportation systems

Science.gov (United States)

Bíl, Michal; Nezval, Vojtěch; Bílová, Martina; Andrášik, Richard; Kubeček, Jan

2017-04-01

We present an overview and two case studies of natural hazard impacts on rail transportation systems in the Czech Republic. Flooding, landsliding, heavy snowfall, windstorms and glaze (black ice) are the most common natural processes which occur in this region. Whereas flooding and landsliding usually cause direct damage to the transportation infrastructure, other hazards predominantly cause indirect losses. Railway and urban tramline networks are almost fully dependent on electricity which is provided by a system of overhead lines (electric lines above the tracks). These lines are extremely susceptible to formation of glaze which blocks conduction of electric current. A December 2014 glaze event caused significant indirect losses in the largest Czech cities and railways due to the above-mentioned process. Details of this event will be provided during the presentation. Windstorms usually cause tree falls which can affect overhead lines and physically block railway tracks. Approximately 30 % of the Czech railway network is closer than 50 m from the nearest forest. This presents significant potential for transport interruption due to falling trees. Complicated legal relations among the owners of the plots of land along railways, the environment (full-grown trees and related habitat), and the railway administrator are behind many traffic interruptions due to falling trees. We have registered 2040 tree falls between 2012 and 2015 on the railway network. A model of the fallen tree hazard was created for the entire Czech railway network. Both above-mentioned case studies provide illustrative examples of the increased fragility of the modern transportation systems which fully rely on electricity. Natural processes with a low destructive power are thereby able to cause network wide service cut-offs.

Air Traffic Control Tools Assessment

Directory of Open Access Journals (Sweden)

Tomáš Noskievič

2017-04-01

Full Text Available Undoubtedly air transport in today’s world wouldn’t be able to exist without any air traffic control service. As the air transport has been coming through major changes and it has been expanding, it is assumed that its volume will be doubled in the next 15 years. Air traffic control uses strictly organised procedures to ensure safe course of air operations. With the skies covered with more airplanes every year, new tools must be introduced to allow the controllers to manage this rising amount of flying aircraft and to keep the air transport safe. This paper provides a comprehensive and organized material, which describes the newest tools and systems used by air traffic control officers. It proposes improvements for further research and development of ATC tools.

Adaptive neuro fuzzy system for modelling and prediction of distance pantograph catenary in railway transportation

Science.gov (United States)

Panoiu, M.; Panoiu, C.; Lihaciu, I. L.

2018-01-01

This research presents an adaptive neuro-fuzzy system which is used in the prediction of the distance between the pantograph and contact line of the electrical locomotives used in railway transportation. In railway transportation any incident that occurs in the electrical system can have major negative effects: traffic interrupts, equipment destroying. Therefore, a prediction as good as possible of such situations is very useful. In the paper was analyzing the possibility of modeling and prediction the variation of the distance between the pantograph and the contact line using intelligent techniques

Railway cognitive radio to enhance safety, security, and performance of positive train control.

Science.gov (United States)

2013-02-01

Robust and interoperable wireless communications are vital to Positive Train Control (PTC). The railway industry has started adopting software-defined radios (SDRs) for packet-data transmission. SDR systems realize previously fixed components as reco...

Fixed Point Learning Based Intelligent Traffic Control System

Science.gov (United States)

Zongyao, Wang; Cong, Sui; Cheng, Shao

2017-10-01

Fixed point learning has become an important tool to analyse large scale distributed system such as urban traffic network. This paper presents a fixed point learning based intelligence traffic network control system. The system applies convergence property of fixed point theorem to optimize the traffic flow density. The intelligence traffic control system achieves maximum road resources usage by averaging traffic flow density among the traffic network. The intelligence traffic network control system is built based on decentralized structure and intelligence cooperation. No central control is needed to manage the system. The proposed system is simple, effective and feasible for practical use. The performance of the system is tested via theoretical proof and simulations. The results demonstrate that the system can effectively solve the traffic congestion problem and increase the vehicles average speed. It also proves that the system is flexible, reliable and feasible for practical use.

Traffic control concepts for incident clearance

Science.gov (United States)

2009-01-01

This document discusses various aspects of traffic control for incidents with the focus on the traffic control roles and responsibilities of the responders as well as the safety of the responders and the motoring public. It also recognizes that activ...

Freight railway transport: Critical variables to improve the transport applied to infrastructure costs and its associated traffic flow

Energy Technology Data Exchange (ETDEWEB)

Zakowska, L.; Pulawska-Obiedowska, S.

2016-07-01

The developed societies have as challenge, among others, to achieve a mobility development based on economic models of low carbon and energy efficient, making it accessible to the entire population. In this context, the sustainable mobility seems to meet the economic, social and environmental needs, minimizing their negative impact. There are three factors that are relevant: (1) infrastructures; (2) modes of transport more ecological and safe, and (3) operations and services for passengers and freights.The objective of this research is to provide guidance to investment in sustainable transport infrastructures that are truly useful and effective. In particular we have studied the case of the railway, using the following information: details of the infrastructure; cost of construction (per kilometre); maintenance cost, and life cycle. This information may be relevant to consider their possible business models.The methodology of this research was focused in the detailed analysis of the infrastructure use and maintenance criteria, the market opportunities for freight development and the available data to validate the obtained results from the software tool reached in this work. Our research includes the different following aspects:• Evaluation of the supported traffic by the rail line.• Relevant items to be considered in the rail infrastructure. Defining the track, we can group items in two sets: civil and rail installations.• Rolling stock available. Locomotives and wagons are modelled to introduce the data as convenience for the user.Besides our research includes the development of software, Decision System Tool (DST), for studying the construction and maintenance cost of railway infrastructure. It is developed in a common and open source program, providing the user the interaction with the critical variable of the line. It has been adjusted using the following references: MOM PlanCargorail; EcoTransIT, and Projects funded by Framework Program of EU (New

Regulation of the Dynamic Live Load Factor for Calculation of Bridge Structures on High-Speed Railway Mainlines

Science.gov (United States)

Dyachenko, Leonid K.; Benin, Andrey V.

2017-06-01

When the high-speed railway traffic is being organized, it becomes necessary to elaborate bridge design standards for high-speed railways (HSR). Methodology of studying the issues of HSR bridge design is based on the comprehensive analysis of domestic research as well as international experience in design, construction and operation of high-speed railways. Serious requirements are imposed on the HSR artificial structures, which raise a number of scientific tasks associated mainly with the issues of the dynamic interaction of the rolling stock and the bridge elements. To ensure safety of traffic and reliability of bridges during the whole period of operation one needs to resolve the dynamic problems of various types of high-speed trains moving along the structures. The article analyses dependences of the magnitude of inertial response on the external stress parameters and proposes a simplified method of determination of the dynamic live load factor caused by the passage of high-speed trains. The usefulness of the given research arises from the reduction of complexity of the complicated dynamic calculations needed to describe a high-speed train travelling along the artificial structures.

Regulation of the Dynamic Live Load Factor for Calculation of Bridge Structures on High-Speed Railway Mainlines

Directory of Open Access Journals (Sweden)

Dyachenko Leonid K.

2017-06-01

Full Text Available When the high-speed railway traffic is being organized, it becomes necessary to elaborate bridge design standards for high-speed railways (HSR. Methodology of studying the issues of HSR bridge design is based on the comprehensive analysis of domestic research as well as international experience in design, construction and operation of high-speed railways. Serious requirements are imposed on the HSR artificial structures, which raise a number of scientific tasks associated mainly with the issues of the dynamic interaction of the rolling stock and the bridge elements. To ensure safety of traffic and reliability of bridges during the whole period of operation one needs to resolve the dynamic problems of various types of high-speed trains moving along the structures. The article analyses dependences of the magnitude of inertial response on the external stress parameters and proposes a simplified method of determination of the dynamic live load factor caused by the passage of high-speed trains. The usefulness of the given research arises from the reduction of complexity of the complicated dynamic calculations needed to describe a high-speed train travelling along the artificial structures.

Light signals for road traffic control.

NARCIS (Netherlands)

Schreuder, D.A.

1981-01-01

Signals for road traffic control are a major constituent of the modern traffic scene, particularly in built-up areas. A vast amount of research has been executed in the last two decennia, resulting in a fairly generally accepted view on what the requirements for effective traffic lights are. For the

Evaluating efficiency of passenger railway stations: a DEA approach

OpenAIRE

Khadem Sameni, Melody; Preston, John; Khadem Sameni, Mona

2016-01-01

Stations are bottlenecks for railway transportation as they are where traffics merge and diverge. Numerous activities such as passengers boarding, alighting and interchanging, train formation and technical checks are also done at these points. The number of platforms is limited and it is vital to do all the work efficiently. For the first time in the literature, we implement a methodology based on data envelopment analysis which is benchmarked from ports and airport efficiency studies. It can...

Future alternatives to GSM-R

DEFF Research Database (Denmark)

Sniady, Aleksander; Soler, José; Dittmann, Lars

Signalling is as fundamental contributor to a robust railway system. European Railway Traffic Management System (ERTMS) enhances dynamic train control, interoperability and track utilization. GSM-R is a communication subsystem in ERTMS.......Signalling is as fundamental contributor to a robust railway system. European Railway Traffic Management System (ERTMS) enhances dynamic train control, interoperability and track utilization. GSM-R is a communication subsystem in ERTMS....

Adaptive traffic control systems for urban networks

Directory of Open Access Journals (Sweden)

Radivojević Danilo

2017-01-01

Full Text Available Adaptive traffic control systems represent complex, but powerful tool for improvement of traffic flow conditions in locations or zones where applied. Many traffic agencies, especially those that have a large number of signalized intersections with high variability of the traffic demand, choose to apply some of the adaptive traffic control systems. However, those systems are manufactured and offered by multiple vendors (companies that are competing for the market share. Due to that fact, besides the information available from the vendors themselves, or the information from different studies conducted on different continents, very limited amount of information is available about the details how those systems are operating. The reason for that is the protecting of the intellectual property from plagiarism. The primary goal of this paper is to make a brief analysis of the functionalities, characteristics, abilities and results of the most recognized, but also less known adaptive traffic control systems to the professional public and other persons with interest in this subject.

PROFESSIONAL RISK ASSESSMENT DURING PERFORMING OFFICIAL DUTIES OF STATION DIS-PATCHERS ON PRYDNIPROVSK RAILWAY

Directory of Open Access Journals (Sweden)

O. A. Nykyforova

2014-03-01

Full Text Available Purpose. To substantiate the importance of psychophysiological selection for the traffic safety prevention, increase of the human factor reliability on the basis of erroneous actions analysis of the Prydniprovsk railway workers of operator type and literature data. Methodology. Studies have been conducted among operation personnel (station dispatchers (n = 62, 32 − women, 30 − men. The method of social survey, psychological techniques using the personal, «NPN-A» (neuropsychic instability − accentuations, individual and typological questionnaire were used. Findings. Typical mistakes of Prydniprovsk railway workers of operator type were analyzed. It was found out that a large group of errors is connected with the failure of staff job descriptions and requirements of labor protection instructions, negligence and carelessness, irresponsible attitude to their duties, inadequate personnel training. Originality. The necessity of new approaches development to the systematic analysis on a quantitative basis of management and assessment of the human factor reliability, which can be provided by professional psychophysiological selection of persons related to traffic safety was grounded. Practical value. The obtained results can be the basis for the development of new methods of physiological investigations concerning occupational selection of railway workers of leading professions. It would accurately predict the performance and reliability of the operators and would provide an opportunity to identify contraindications to the professional activity.

Using Improved Entropy-Cloud Model to Select High-Speed Railway Express Freight Train Service Sites

Directory of Open Access Journals (Sweden)

Wencheng Huang

2017-01-01

Full Text Available High-speed railway (HSR express freight train service sites selection is critical to the development of China’s Third Party Logistics market. In this paper, we formulate an improved entropy-cloud model based approach to solve the HSR express sites selection problem for the first time. The basic data of the indicators, for example, existing railway network conditions, traffic environment, express freight market demand, and policy, will be used as the inputs. We apply improved entropy method to obtain each subindicator’s weight. The cloud model will be used to select and classify each station under evaluation.

Moving of the traffic belt in the working zone of the Frimmersdorf opencast mine. [3 refs

Energy Technology Data Exchange (ETDEWEB)

Berkenbusch, J; Wuerz, W

1976-10-01

The traffic belt, comprising a public road, a railway line of the Federal German railways and a river, the Erft, had to be moved to exploit the Frimmersdorf-Sued opencast mine still further. Some years ago the River Erft had been rerouted in a series of operations. Now the final location of the traffic belt was to follow to the east on the overburden dump behind the opencast mine. After describing the construction engineering plans for the complete project the authors describe the planning sequence, how approval was obtained and construction procedure. Finally, brief mention is made of the landscaping.

The railway as a system - a safety view of the interface between track and operations; System Bahn - Sicherheitsbetrachtung der Schnittstelle zwischen Fahrweg und Betrieb

Energy Technology Data Exchange (ETDEWEB)

Grauf, H.H. [Eisenbahn-Bundesamt, Bonn (Germany)

2004-07-01

The opinion is often expressed that one of the essential advantages of rail compared with road traffic is that it forms a coherent closed system. In engineering terms, trains and the permanent way are parts of a single whole. The central monitoring and control of all process not only offers various different opportunities for economic optimization but also for making sure that technical safety is engineered in. However, there are objectives, such as the unimpeded movement of goods within Europe, competition of the railways and access to the railway infrastructure free from any form of discrimination, that mean that there has to be a differentiation between infrastructure providers and transport operators. Critics see this as a wilful dismembering of the system and express fears that safety could be jeopardized. The author sets out to explain the essentials of how the various components of the railway system interact with one another and to discuss implications for safety. (orig.)

Analysis and forecast of railway coal transportation volume based on BP neural network combined forecasting model

Science.gov (United States)

Xu, Yongbin; Xie, Haihong; Wu, Liuyi

2018-05-01

The share of coal transportation in the total railway freight volume is about 50%. As is widely acknowledged, coal industry is vulnerable to the economic situation and national policies. Coal transportation volume fluctuates significantly under the new economic normal. Grasp the overall development trend of railway coal transportation market, have important reference and guidance significance to the railway and coal industry decision-making. By analyzing the economic indicators and policy implications, this paper expounds the trend of the coal transportation volume, and further combines the economic indicators with the high correlation with the coal transportation volume with the traditional traffic prediction model to establish a combined forecasting model based on the back propagation neural network. The error of the prediction results is tested, which proves that the method has higher accuracy and has practical application.

DEVELOPMENT OF RAILWAY TOURISM IN UKRAINE AS MEANS OF AVAILABLE REST ORGANIZATION

Directory of Open Access Journals (Sweden)

L. V. Martseniuk

2015-10-01

Full Text Available Purpose. In highly developed countries, railway tourism is very popular, through it the tourists can comfortably and within their financial capacity to travel all around the world. Ukraine has faced with the problem of significant reduction of the tourist volume flows, aging of fixed assets, lack of investments on their renewal, reduction in passenger traffic and a sharp drop in people income. The purpose of the article is to justify the development of railway tourism in Ukraine. Methodology. Theoretical and methodological basis of the research is built on analysis of problems to ensure the competitiveness of the tourism industry in the area of passenger transportation, theoretical principles of economic science in the field of railway tourism efficiency and management of tourist flows. The authors suggest the development of railway tourism in Ukraine. In particular it concerns the introduction of new services in the field of tourism, management of tourist flows and others. The attention is focused on the development of the internal railway tourism. Findings. As a result of the assigned tasks the following results should be achieved: improving the image of Ukrainian railways; creation of an attractive investment climate for the greater involvement of investments into the tourism, engineering, transport and municipal infrastructures; improving the safety of tourists; ensuring effective protection of their rights, legitimate interests and property maintenance. Originality. The authors justified the need and potential of rail tourism on the territory of Ukraine taking into account the experience of foreign developed countries. Рractical value. Researchers presented theoretical generalization and new solution of scientific tasks. It manifests itself in the development of theoretical and methodological approaches to the development of railway tourism. Rationally applied measures of proposed by the authors ways of tourist flow management will

Calculation of vehicle delay at signal-controlled intersections with adaptive traffic control algorithm

Directory of Open Access Journals (Sweden)

Andronov Roman

2018-01-01

Full Text Available By widely introducing information technology tools in the field of traffic control, it is possible to increase the capacity of hubs and reduce vehicle delays. Adaptive traffic light control is one of such tools. Its effectiveness can be assessed through traffic flow simulation. The aim of this study is to create a simulation model of a signal-controlled intersection that can be used to assess the effectiveness of adaptive control in various traffic situations, including the presence or absence of pedestrian traffic through an intersection. The model is based on a numerical experiment conducted using the Monte Carlo method. As a result of the study, vehicle delays, queue length and duration of traffic light cycles are calculated subject to different intensities of incoming traffic flows, and the presence or absence of pedestrian traffic.

Automobile control technology and traffic control

Energy Technology Data Exchange (ETDEWEB)

Takaba, Sadao [Univ. of Tokyo (Japan)

1988-09-05

In the field of automobile control technology, electronic was first adopted for the electronic fuel control as an answer to the exhaust gas regulations. The operations of the driving system, frame system or the automobile itself which is the combination of the two were optimized by adding sensors, computers, actuators, etc. to alleviate the burden of the driver, offering easier drivability and confortableness. For local driving control, measurement of distance up to obstacle has been practiced using the ultrasonic radar sensor. Research and development of microwave radar sensor have been carried out for years. Automatic driving has been a dream technology, and the study for the technology was started since early times. Remarkable progress was made recently in the navigation system for traffic control in wide area. New automobile traffic information communication and other systems are being developed. Historical description is made on the control and information systems for road transportation, dividing the period into the 1st, 2nd and 3rd generations. 10 references.

Simplified Transit Procedure in Railway Transport

Directory of Open Access Journals (Sweden)

Željko Kokorović

2008-11-01

Full Text Available The current transit procedure in railway transport that iscarried out on the basis of the Customs Act [ 11 of the Republicof Croatia is applied only up to the border, i. e. the issued documentsand guarantees are valid only up to the border, and byjoining the Convention on Common transit procedure, i. e. integrationof the Republic of Croatia in the European Union, theRepublic of Croatia will also have to implement the regulationsand rules of Simplified transit procedure valid in each of thethirty member states. In international railway traffic, the transportof goods is regulated by the Convention concerning InternationalCarriage by Rail- COT IF [2 1 and usage of the CIMwaybill (Contract for International Carriage of Goods by Rail.If the goods are transported in Simplified transit procedure, theformalities regarding the transport of goods performed by railcarriers using the international waybill CIM will be significantlysimplified and accelerated. In principle there are no delays dueto customs on the borders when crossing the EU borders andborders of the Convention member states, contributing greatlyto the acceleration of the transport of goods, reduction of waitingcosts and paperwork, as well as influence on the schedulereliability.

MODELS OF AIR TRAFFIC CONTROLLERS ERRORS PREVENTION IN TERMINAL CONTROL AREAS UNDER UNCERTAINTY CONDITIONS

Directory of Open Access Journals (Sweden)

Volodymyr Kharchenko

2017-03-01

Full Text Available Purpose: the aim of this study is to research applied models of air traffic controllers’ errors prevention in terminal control areas (TMA under uncertainty conditions. In this work the theoretical framework descripting safety events and errors of air traffic controllers connected with the operations in TMA is proposed. Methods: optimisation of terminal control area formal description based on the Threat and Error management model and the TMA network model of air traffic flows. Results: the human factors variables associated with safety events in work of air traffic controllers under uncertainty conditions were obtained. The Threat and Error management model application principles to air traffic controller operations and the TMA network model of air traffic flows were proposed. Discussion: Information processing context for preventing air traffic controller errors, examples of threats in work of air traffic controllers, which are relevant for TMA operations under uncertainty conditions.

Intelligent Traffic Control System Implementation for Traffic Violation Control, Congestion Control and Stolen Vehicle Detection

Directory of Open Access Journals (Sweden)

Swarup Suresh Kulkarni

2017-07-01

Full Text Available Traffic is significant issue in our nation, particularly in urban ranges. Aftereffect of this, activity clog issue happens. Crisis vehicle like rescue vehicle, fire unit, squad cars confront bunches of issue to achieve their goal on account of congested driving conditions, coming about loss of human lives. To minimize this issue we approach new idea name as ”Traffic control framework for blockage control and stolen Vehicle location”. In this framework activity freedom done by transforming Red flag into Green flag. We demonstrate idea of what is called ”Green wave”. Alongside this, we distinguish stolen vehicle by utilizing extremely advantageous RFID innovation. In the event that stolen vehicle is been distinguished, the framework gives ready sign through ringer. Framework sends Message with the assistance of GSM to Police station. In this framework we Use diverse RFID labels for recognizing rescue vehicle, stolen Vehicles. On the off chance that Red flag is on and IR sensor is initiated, then framework gives ringer alarm to movement police. This is novel framework which encourage great answer for comprehend traffic clog.

A knowledge-based system for controlling automobile traffic

Science.gov (United States)

Maravas, Alexander; Stengel, Robert F.

1994-01-01

Transportation network capacity variations arising from accidents, roadway maintenance activity, and special events as well as fluctuations in commuters' travel demands complicate traffic management. Artificial intelligence concepts and expert systems can be useful in framing policies for incident detection, congestion anticipation, and optimal traffic management. This paper examines the applicability of intelligent route guidance and control as decision aids for traffic management. Basic requirements for managing traffic are reviewed, concepts for studying traffic flow are introduced, and mathematical models for modeling traffic flow are examined. Measures for quantifying transportation network performance levels are chosen, and surveillance and control strategies are evaluated. It can be concluded that automated decision support holds great promise for aiding the efficient flow of automobile traffic over limited-access roadways, bridges, and tunnels.

Bottom to Top Approach for Railway KPI Generation

Science.gov (United States)

Villarejo, Roberto; Johansson, Carl-Anders; Leturiondo, Urko; Simon, Victor; Seneviratne, Dammika; Galar, Diego

2017-09-01

Railway maintenance especially on infrastructure produces a vast amount of data. However, having data is not synonymous with having information; rather, data must be processed to extract information. In railway maintenance, the development of key performance indicators (KPIs) linked to punctuality or capacity can help planned and scheduled maintenance, thus aligning the maintenance department with corporate objectives. There is a need for an improved method to analyse railway data to find the relevant KPIs. The system should support maintainers, answering such questions as what maintenance should be done, where and when. The system should equip the user with the knowledge of the infrastructure's condition and configuration, and the traffic situation so maintenance resources can be targeted to only those areas needing work. The amount of information is vast, so it must be hierarchized and aggregated; users must filter out the useless indicators. Data are fused by compiling several individual indicators into a single index; the resulting composite indicators measure multidimensional concepts which cannot be captured by a single index. The paper describes a method of monitoring a complex entity. In this scenario, a plurality of use indices and weighting values are used to create a composite and aggregated use index from a combination of lower level use indices and weighting values. The resulting composite and aggregated indicators can be a decision-making tool for asset managers at different hierarchical levels.

Determination of traffic noise nuisance as a function of traffic type and density in a heavily populated area

Science.gov (United States)

Heimerl, G.; Holzmann, E.

1979-01-01

On the basis of a study including noise level measurements during the day and night and 1125 interviews with residents, it was found that railway noise creates less of a disturbance than street traffic noise. By far the largest majority of respondents experienced the greatest disturbance during the day. The difference in nuisance decreases as noise level rises.

Probabilistic Fatigue Life Updating for Railway Bridges Based on Local Inspection and Repair.

Science.gov (United States)

Lee, Young-Joo; Kim, Robin E; Suh, Wonho; Park, Kiwon

2017-04-24

Railway bridges are exposed to repeated train loads, which may cause fatigue failure. As critical links in a transportation network, railway bridges are expected to survive for a target period of time, but sometimes they fail earlier than expected. To guarantee the target bridge life, bridge maintenance activities such as local inspection and repair should be undertaken properly. However, this is a challenging task because there are various sources of uncertainty associated with aging bridges, train loads, environmental conditions, and maintenance work. Therefore, to perform optimal risk-based maintenance of railway bridges, it is essential to estimate the probabilistic fatigue life of a railway bridge and update the life information based on the results of local inspections and repair. Recently, a system reliability approach was proposed to evaluate the fatigue failure risk of structural systems and update the prior risk information in various inspection scenarios. However, this approach can handle only a constant-amplitude load and has limitations in considering a cyclic load with varying amplitude levels, which is the major loading pattern generated by train traffic. In addition, it is not feasible to update the prior risk information after bridges are repaired. In this research, the system reliability approach is further developed so that it can handle a varying-amplitude load and update the system-level risk of fatigue failure for railway bridges after inspection and repair. The proposed method is applied to a numerical example of an in-service railway bridge, and the effects of inspection and repair on the probabilistic fatigue life are discussed.

Formal development and verification of a distributed railway control system

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Peleska, J.

2000-01-01

specifications which are transformed into directly implementable distributed control processes by applying a series of refinement and verification steps. Concrete safety requirements are derived from an abstract version that can be easily validated with respect to soundness and completeness. Complexity......The authors introduce the concept for a distributed railway control system and present the specification and verification of the main algorithm used for safe distributed control. Our design and verification approach is based on the RAISE method, starting with highly abstract algebraic...... is further reduced by separating the system model into a domain model and a controller model. The domain model describes the physical system in absence of control and the controller model introduces the safety-related control mechanisms as a separate entity monitoring observables of the physical system...

Adaptive traffic signal control with actor-critic methods in a real-world traffic network with different traffic disruption events

NARCIS (Netherlands)

Aslani, Mohammad; Mesgari, Mohammad Saadi; Wiering, Marco

2017-01-01

The transportation demand is rapidly growing in metropolises, resulting in chronic traffic con-gestions in dense downtown areas. Adaptive traffic signal control as the principle part of in-telligent transportation systems has a primary role to effectively reduce traffic congestion by making a

An assessment of the dynamic interaction of the rolling stock and the long-span bridges on high-speed railways

Directory of Open Access Journals (Sweden)

K. Dyachenko Leonid

2017-01-01

Full Text Available When the high-speed railway traffic is being organized, it becomes necessary to elaborate bridge design standards for high-speed railways. To ensure safety of traffic and reliability of bridges one needs to resolve the dynamic problems of various types of high-speed trains moving along the structures. The article analyzes the magnitude of inertial response as the function of the external stress parameters. A simplified structure assessment technique is offered based on the criterion of passenger comfort while crossing the bridges. The usefulness of the given research arises from the reduction of complexity of the complicated dynamic calculations needed to describe a high-speed train travelling along the artificial structures. Dependences of relative elastic deflection values from the span length are proposed, which allows designing and calculating long-span structures using the simplified dynamic models.

Development and Evaluation of a Control System for Regional Traffic Management

Directory of Open Access Journals (Sweden)

John L. McLin

2011-01-01

Full Text Available Traffic congestion is a worsening problem in metropolitan areas which will require integrated regional traffic control systems to improve traffic conditions. This paper presents a regional traffic control system which can detect incident conditions and provide integrated traffic management during nonrecurrent congestion events. The system combines advanced artificial intelligence techniques with a traffic performance model based on HCM equations. Preliminary evaluation of the control system using traffic microsimulation demonstrates that it has the potential to improve system conditions during traffic incidents. In addition, several enhancements were identified which will make the system more robust in a real traffic control setting. An assessment of the control system elements indicates that there are no substantial technical barriers in implementing this system in a large traffic network.

Electromagnetic Vibration Energy Harvesting for Railway Applications

Directory of Open Access Journals (Sweden)

Bradai S.

2018-01-01

Full Text Available Safe localization of trains via GPS and wireless sensors is essential for railway traffic supervision. Especially for freight trains and because normally no power source is available on the wagons, special solutions for energy supply have to be developed based on energy harvesting techniques. Since vibration is available in this case, it provides an interesting source of energy. Nevertheless, in order to have an efficient design of the harvesting system, the existing vibration needs to be investigated. In this paper, we focus on the characterization of vibration parameters in railway application. We propose an electromagnetic vibration converter especially developed to this application. Vibration profiles from a train traveling between two German cities were measured using a data acquisition system installed on the train’s wagon. Results show that the measured profiles present multiple frequency signals in the range of 10 to 50 Hz and an acceleration of up to 2 g. A prototype for a vibration converter is designed taking into account the real vibration parameters, robustness and integrability requirements. It is based on a moving coil attached to a mechanical spring. For the experimental emulation of the train vibrations, a shaker is used as an external artificial vibration source controlled by a laser sensor in feedback. A maximum voltage of 1.7 V peak to peak which corresponds to a maximum of 10 mW output power where the applied excitation frequency is close to the resonant frequency of the converter which corresponds to 27 Hz.

Consensus-Based Cooperative Control Based on Pollution Sensing and Traffic Information for Urban Traffic Networks.

Science.gov (United States)

Artuñedo, Antonio; Del Toro, Raúl M; Haber, Rodolfo E

2017-04-26

Nowadays many studies are being conducted to develop solutions for improving the performance of urban traffic networks. One of the main challenges is the necessary cooperation among different entities such as vehicles or infrastructure systems and how to exploit the information available through networks of sensors deployed as infrastructures for smart cities. In this work an algorithm for cooperative control of urban subsystems is proposed to provide a solution for mobility problems in cities. The interconnected traffic lights controller ( TLC ) network adapts traffic lights cycles, based on traffic and air pollution sensory information, in order to improve the performance of urban traffic networks. The presence of air pollution in cities is not only caused by road traffic but there are other pollution sources that contribute to increase or decrease the pollution level. Due to the distributed and heterogeneous nature of the different components involved, a system of systems engineering approach is applied to design a consensus-based control algorithm. The designed control strategy contains a consensus-based component that uses the information shared in the network for reaching a consensus in the state of TLC network components. Discrete event systems specification is applied for modelling and simulation. The proposed solution is assessed by simulation studies with very promising results to deal with simultaneous responses to both pollution levels and traffic flows in urban traffic networks.

Consensus-Based Cooperative Control Based on Pollution Sensing and Traffic Information for Urban Traffic Networks

Directory of Open Access Journals (Sweden)

Antonio Artuñedo

2017-04-01

Full Text Available Nowadays many studies are being conducted to develop solutions for improving the performance of urban traffic networks. One of the main challenges is the necessary cooperation among different entities such as vehicles or infrastructure systems and how to exploit the information available through networks of sensors deployed as infrastructures for smart cities. In this work an algorithm for cooperative control of urban subsystems is proposed to provide a solution for mobility problems in cities. The interconnected traffic lights controller (TLC network adapts traffic lights cycles, based on traffic and air pollution sensory information, in order to improve the performance of urban traffic networks. The presence of air pollution in cities is not only caused by road traffic but there are other pollution sources that contribute to increase or decrease the pollution level. Due to the distributed and heterogeneous nature of the different components involved, a system of systems engineering approach is applied to design a consensus-based control algorithm. The designed control strategy contains a consensus-based component that uses the information shared in the network for reaching a consensus in the state of TLC network components. Discrete event systems specification is applied for modelling and simulation. The proposed solution is assessed by simulation studies with very promising results to deal with simultaneous responses to both pollution levels and traffic flows in urban traffic networks.

Delays at signalised intersections with exhaustive traffic control

NARCIS (Netherlands)

Boon, M.A.A.; Adan, I.J.B.F.; Winands, E.M.M.; Down, D.G.

2010-01-01

In this paper we study a traffic intersection with vehicle-actuated traffic signal control. Traffic lights stay green until all lanes within a group are emptied. Assuming general renewal arrival processes, we derive exact limiting distributions of the delays under Heavy Traffic (HT) conditions,

Delays at signalized intersections with exhaustive traffic control

NARCIS (Netherlands)

Boon, M.A.A.; Adan, I.J.B.F.; Winands, E.M.M.; Down, D.G.

2012-01-01

In this paper, we study a traffic intersection with vehicle-actuated traffic signal control. Traffic lights stay green until all lanes within a group are emptied. Assuming general renewal arrival processes, we derive exact limiting distributions of the delays under heavy traffic (HT) conditions.

Delays at signalised intersections with exhaustive traffic control

NARCIS (Netherlands)

Boon, M.A.A.; Adan, I.J.B.F.; Winands, E.M.M.; Down, D.G.

2012-01-01

In this paper, we study a traffic intersection with vehicle-actuated traffic signal control. Traffic lights stay green until all lanes within a group are emptied. Assuming general renewal arrival processes, we derive exact limiting distributions of the delays under heavy traffic (HT) conditions.

Function of Train Traction Department and Railway Vehicles in Logistic Centres

Directory of Open Access Journals (Sweden)

Velimir Kolar

2007-05-01

Full Text Available The increasing globalization has spread the production locationsto every part of the world thus increasing even more therole of transport in determining the price and quality of a product.Therefore, the producers and carriers join together moreand more frequently through the supply chains. Railway carriershave a very significant role in supply chains, both throughorganization of transport and forming the trains as final products,and through forming the logistic centres. Logistic centresare the starting and the final railway stations but also the meetingpoints of the national carrier with other carriers (sea, road,river as well as other railway carriers and they also represent informationcentres. For the quality of service at logistic centres, itis important to have well organized operation of train traction.In order to keep up the regulmity of trains and the quality oftransport at logistic centres, among other things, it is necessaryto provide an optimal number of locomotives and to providethe technical inspection place. Special attention should be paidto the organization of work peiformed by the engine staff At logisticcentres it is possible to organize high-quality technical inspectionof wagons thus increasing the traffic safety.

CONTROLLING TRAFFIC FLOW IN MULTILANE-ISOLATED INTERSECTION USING ANFIS APPROACH TECHNIQUES

Directory of Open Access Journals (Sweden)

G. R. LAI

2015-08-01

Full Text Available Many controllers have applied the Adaptive Neural-Fuzzy Inference System (ANFIS concept for optimizing the controller performance. However, there are less traffic signal controllers developed using the ANFIS concept. ANFIS traffic signal controller with its fuzzy rule base and its ability to learn from a set of sample data could improve the performance of Existing traffic signal controlling system to reduce traffic congestions at most of the busy traffic intersections in city such as Kuala Lumpur, Malaysia. The aim of this research is to develop an ANFIS traffic signals controller for multilane-isolated four approaches intersections in order to ease traffic congestions at traffic intersections. The new concept to generate sample data for ANFIS training is introduced in this research. The sample data is generated based on fuzzy rules and can be analysed using tree diagram. This controller is simulated on multilane-isolated traffic intersection model developed using M/M/1 queuing theory and its performance in terms of average waiting time, queue length and delay time are compared with traditional controllers and fuzzy controller. Simulation result shows that the average waiting time, queue length, and delay time of ANFIS traffic signal controller are the lowest as compared to the other three controllers. In conclusion, the efficiency and performance of ANFIS controller are much better than that of fuzzy and traditional controllers in different traffic volumes.

Using Automated Planning for Traffic Signals Control

Directory of Open Access Journals (Sweden)

Matija Gulić

2016-08-01

Full Text Available Solving traffic congestions represents a high priority issue in many big cities. Traditional traffic control systems are mainly based on pre-programmed, reactive and local techniques. This paper presents an autonomic system that uses automated planning techniques instead. These techniques are easily configurable and modified, and can reason about the future implications of actions that change the default traffic lights behaviour. The proposed implemented system includes some autonomic properties, since it monitors the current traffic state, detects if the system is degrading its performance, sets up new sets of goals to be achieved by the planner, triggers the planner that generates plans with control actions, and executes the selected courses of actions. The obtained results in several artificial and real world data-based simulation scenarios show that the proposed system can efficiently solve traffic congestion.

Distributed traffic signal control using fuzzy logic

Science.gov (United States)

Chiu, Stephen

1992-01-01

We present a distributed approach to traffic signal control, where the signal timing parameters at a given intersection are adjusted as functions of the local traffic condition and of the signal timing parameters at adjacent intersections. Thus, the signal timing parameters evolve dynamically using only local information to improve traffic flow. This distributed approach provides for a fault-tolerant, highly responsive traffic management system. The signal timing at an intersection is defined by three parameters: cycle time, phase split, and offset. We use fuzzy decision rules to adjust these three parameters based only on local information. The amount of change in the timing parameters during each cycle is limited to a small fraction of the current parameters to ensure smooth transition. We show the effectiveness of this method through simulation of the traffic flow in a network of controlled intersections.

A digital filter-based approach to the remote condition monitoring of railway turnouts

International Nuclear Information System (INIS)

Garcia Marquez, Fausto Pedro; Schmid, Felix

2007-01-01

Railway operations in Europe have changed dramatically since the early 1990s, partly as a result of new European Union Directives. Performance targets have become more and more exacting, due to reductions in state support for railways and the need to increasing traffic. More intensive operations also place greater demands on the hardware of the railway. This is true for both rolling stock and infrastructure subsystems and components, particularly so in the case of the latter where the time available for maintenance is being reduced. The authors of this paper focus on the railway infrastructure, and more specifically on points. These are critical elements whose reliability is key to the operation of the whole system. Using intelligent monitoring systems, it is possible to predict problems and enable quick recovery before component failures disrupt operations. The authors have studied the application of remote condition monitoring to point mechanisms and their operation, and have identified algorithms which may be used to identify incipient failures. In this paper, the authors propose a Kalman filter for the linear discrete data filtering problem encountered when using current sensor data in a point condition monitoring system. The reason for applying Kalman filtering in this study was to increase the reliability of the model presented to the rule-based decision mechanism

Discrete event simulation of Maglev transport considering traffic waves

Directory of Open Access Journals (Sweden)

Moo Hyun Cha

2014-10-01

Full Text Available A magnetically levitated vehicle (Maglev system is under commercialization as a new transportation system in Korea. The Maglev is operated by an unmanned automatic control system. Therefore, the plan of train operation should be carefully established and validated in advance. In general, when making a train operation plan, statistically predicted traffic data is used. However, a traffic wave often occurs in real train service, and demand-driven simulation technology is required to review a train operation plan and service quality considering traffic waves. We propose a method and model to simulate Maglev operation considering continuous demand changes. For this purpose, we employed a discrete event model that is suitable for modeling the behavior of railway passenger transportation. We modeled the system hierarchically using discrete event system specification (DEVS formalism. In addition, through implementation and an experiment using the DEVSim++ simulation environment, we tested the feasibility of the proposed model. Our experimental results also verified that our demand-driven simulation technology can be used for a priori review of train operation plans and strategies.

Synthesis of railway-signaling plans using reachability games

DEFF Research Database (Denmark)

Kasting, Patrick Frederik Soelmark; Hansen, Michael Reichhardt; Vester, Steen

2016-01-01

(the control system) controls signals and points and the universal player (the antagonistic environment) controls movement of trains. A winning strategy for the existential player provides a signaling plan that will safely guide trains through the network. The concepts from the railway network model......In this work, we show the feasibility of using functional programming (more specifically F#) in connection with gamebased methods for synthesis of correct-by-construction controllers (also called signaling plans) for railway networks. This is a massively resource-demanding application. A model...

5 CFR 842.207 - Air traffic controllers.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Air traffic controllers. 842.207 Section 842.207 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES RETIREMENT SYSTEM-BASIC ANNUITY Eligibility § 842.207 Air traffic controllers. (a) An employee who separates from...

Urban Traffic Signal System Control Structural Optimization Based on Network Analysis

Directory of Open Access Journals (Sweden)

Li Wang

2013-01-01

Full Text Available Advanced urban traffic signal control systems such as SCOOT and SCATS normally coordinate traffic network using multilevel hierarchical control mechanism. In this mechanism, several key intersections will be selected from traffic signal network and the network will be divided into different control subareas. Traditionally, key intersection selection and control subareas division are executed according to dynamic traffic counts and link length between intersections, which largely rely on traffic engineers’ experience. However, it omits important inherent characteristics of traffic network topology. In this paper, we will apply network analysis approach into these two aspects for traffic system control structure optimization. Firstly, the modified C-means clustering algorithm will be proposed to assess the importance of intersections in traffic network and furthermore determine the key intersections based on three indexes instead of merely on traffic counts in traditional methods. Secondly, the improved network community discovery method will be used to give more reasonable evidence in traffic control subarea division. Finally, to test the effectiveness of network analysis approach, a hardware-in-loop simulation environment composed of regional traffic control system, microsimulation software and signal controller hardware, will be built. Both traditional method and proposed approach will be implemented on simulation test bed to evaluate traffic operation performance indexes, for example, travel time, stop times, delay and average vehicle speed. Simulation results show that the proposed network analysis approach can improve the traffic control system operation performance effectively.

Automatic generation and verification of railway interlocking control tables using FSM and NuSMV

Directory of Open Access Journals (Sweden)

Mohammad B. YAZDI

2009-01-01

Full Text Available Due to their important role in providing safe conditions for train movements, railway interlocking systems are considered as safety critical systems. The reliability, safety and integrity of these systems, relies on reliability and integrity of all stages in their lifecycle including the design, verification, manufacture, test, operation and maintenance.In this paper, the Automatic generation and verification of interlocking control tables, as one of the most important stages in the interlocking design process has been focused on, by the safety critical research group in the School of Railway Engineering, SRE. Three different subsystems including a graphical signalling layout planner, a Control table generator and a Control table verifier, have been introduced. Using NuSMV model checker, the control table verifier analyses the contents of control table besides the safe train movement conditions and checks for any conflicting settings in the table. This includes settings for conflicting routes, signals, points and also settings for route isolation and single and multiple overlap situations. The latest two settings, as route isolation and multiple overlap situations are from new outcomes of the work comparing to works represented on the subject recently.

Task Analysis Assessment on Intrastate Bus Traffic Controllers

Science.gov (United States)

Yen Bin, Teo; Azlis-Sani, Jalil; Nur Annuar Mohd Yunos, Muhammad; Ismail, S. M. Sabri S. M.; Tajedi, Noor Aqilah Ahmad

2016-11-01

Public transportation acts as social mobility and caters the daily needs of the society for passengers to travel from one place to another. This is true for a country like Malaysia where international trade has been growing significantly over the past few decades. Task analysis assessment was conducted with the consideration of cognitive ergonomic view towards problem related to human factors. Conducting research regarding the task analysis on bus traffic controllers had allowed a better understanding regarding the nature of work and the overall monitoring activities of the bus services. This paper served to study the task analysis assessment on intrastate bus traffic controllers and the objectives of this study include to conduct task analysis assessment on the bus traffic controllers. Task analysis assessment for the bus traffic controllers was developed via Hierarchical Task Analysis (HTA). There are a total of five subsidiary tasks on level one and only two were able to be further broken down in level two. Development of HTA allowed a better understanding regarding the work and this could further ease the evaluation of the tasks conducted by the bus traffic controllers. Thus, human error could be reduced for the safety of all passengers and increase the overall efficiency of the system. Besides, it could assist in improving the operation of the bus traffic controllers by modelling or synthesizing the existing tasks if necessary.

Numerical modelling of ground vibration caused by elevated high-speed railway lines considering structure-soil-structure interaction

DEFF Research Database (Denmark)

Bucinskas, Paulius; Andersen, Lars Vabbersgaard; Persson, Kent

2016-01-01

Construction of high speed railway lines has been an increasing trend in recent years. Countries like Denmark and Sweden plan to expand and upgrade their railways to accommodate high-speed traffic. To benefit from the full potential of the reduced commuting times, these lines must pass through...... densely populated urban areas with the collateral effect of increased noise and vibrations levels. This paper aims to quantify the vibrations levels in the area surrounding an elevated railway line built as a multi-span bridge structure. The proposed model employs finite-element analysis to model......-space. The paper analyses the effects of structure-soil-structure interaction on the dynamic behaviour of the surrounding soil surface. The effects of different soil stratification and material properties as well as different train speeds are assessed. Finally, the drawbacks of simplifying the numerical model...

Railway infrastructure security

CERN Document Server

Sforza, Antonio; Vittorini, Valeria; Pragliola, Concetta

2015-01-01

This comprehensive monograph addresses crucial issues in the protection of railway systems, with the objective of enhancing the understanding of railway infrastructure security. Based on analyses by academics, technology providers, and railway operators, it explains how to assess terrorist and criminal threats, design countermeasures, and implement effective security strategies. In so doing, it draws upon a range of experiences from different countries in Europe and beyond. The book is the first to be devoted entirely to this subject. It will serve as a timely reminder of the attractiveness of the railway infrastructure system as a target for criminals and terrorists and, more importantly, as a valuable resource for stakeholders and professionals in the railway security field aiming to develop effective security based on a mix of methodological, technological, and organizational tools. Besides researchers and decision makers in the field, the book will appeal to students interested in critical infrastructur...

Traffic analysis and control using image processing

Science.gov (United States)

Senthilkumar, K.; Ellappan, Vijayan; Arun, A. R.

2017-11-01

This paper shows the work on traffic analysis and control till date. It shows an approach to regulate traffic the use of image processing and MATLAB systems. This concept uses computational images that are to be compared with original images of the street taken in order to determine the traffic level percentage and set the timing for the traffic signal accordingly which are used to reduce the traffic stoppage on traffic lights. They concept proposes to solve real life scenarios in the streets, thus enriching the traffic lights by adding image receivers like HD cameras and image processors. The input is then imported into MATLAB to be used. as a method for calculating the traffic on roads. Their results would be computed in order to adjust the traffic light timings on a particular street, and also with respect to other similar proposals but with the added value of solving a real, big instance.

BOTTOM TO TOP APPROACH FOR RAILWAY KPI GENERATION

Directory of Open Access Journals (Sweden)

Roberto VILLAREJO

2017-07-01

Full Text Available Railway maintenance especially on infrastructure produces a vast amount of data. However, having data is not synony-mous with having information; rather, data must be processed to extract information. In railway maintenance, the de-velopment of key performance indicators (KPIs linked to punctuality or capacity can help planned and scheduled maintenance, thus aligning the maintenance department with corporate objectives. There is a need for an improved method to analyse railway data to find the relevant KPIs. The system should support maintainers, answering such ques-tions as what maintenance should be done, where and when. The system should equip the user with the knowledge of the infrastructure's condition and configuration, and the traffic situation so maintenance resources can be targeted to only those areas needing work. The amount of information is vast, so it must be hierarchized and aggregated; users must filter out the useless indicators. Data are fused by compiling several individual indicators into a single index; the resulting composite indicators measure multidimensional concepts which cannot be captured by a single index. The paper describes a method of monitoring a complex entity. In this scenario, a plurality of use indices and weighting values are used to create a composite and aggregated use index from a combination of lower level use indices and weighting values. The resulting composite and aggregated indicators can be a decision-making tool for asset managers at different hierarchical levels.

[Emergency response management near the tracks of the public railway network: special aspects of missions connected with the German national railway system].

Science.gov (United States)

Krämer, P; Aul, A; Vock, B; Frank, C

2010-11-01

Emergency response management and rescue operations concerning the railway network in Germany need special attention and implementation in several ways. The emergency response concerning the German national railway network managed by Deutsche Bahn AG is subject to various rules and regulations which have to be followed precisely. Only by following these rules and procedures is the safety of all emergency staff at the scene ensured. The German national railway network (Deutsche Bahn AG) provides its own emergency response control center, which specializes in managing its response to emergencies and dispatches an emergency response manager to the scene. This person serves as the primary Deutsche Bahn AG representative at the scene and is the only person who is allowed to earth the railway electrical power lines. This article will discuss different emergency situations concerning railway accidents and the emergency medical response to them based on a near collision with a high speed train during a rescue mission close to the railway track. Injury to personnel could only be avoided by chance and luck. The dangers and risks for rescue staff are specified. Furthermore, the article details practical guidelines for rescue operations around the German national railway track system.

A computerized traffic control algorithm to determine optimal traffic signal settings. Ph.D. Thesis - Toledo Univ.

Science.gov (United States)

Seldner, K.

1977-01-01

An algorithm was developed to optimally control the traffic signals at each intersection using a discrete time traffic model applicable to heavy or peak traffic. Off line optimization procedures were applied to compute the cycle splits required to minimize the lengths of the vehicle queues and delay at each intersection. The method was applied to an extensive traffic network in Toledo, Ohio. Results obtained with the derived optimal settings are compared with the control settings presently in use.

CONTROLLING TRAFFIC FLOW IN MULTILANE-ISOLATED INTERSECTION USING ANFIS APPROACH TECHNIQUES

OpenAIRE

G. R. LAI; A. CHE SOH; H. MD. SARKAN; R. Z. ABDUL RAHMAN; M. K. HASSAN

2015-01-01

Many controllers have applied the Adaptive Neural-Fuzzy Inference System (ANFIS) concept for optimizing the controller performance. However, there are less traffic signal controllers developed using the ANFIS concept. ANFIS traffic signal controller with its fuzzy rule base and its ability to learn from a set of sample data could improve the performance of Existing traffic signal controlling system to reduce traffic congestions at most of the busy traffic intersections in city such as Kuala L...

Long-Term Deflection Prediction from Computer Vision-Measured Data History for High-Speed Railway Bridges

Directory of Open Access Journals (Sweden)

Jaebeom Lee

2018-05-01

Full Text Available Management of the vertical long-term deflection of a high-speed railway bridge is a crucial factor to guarantee traffic safety and passenger comfort. Therefore, there have been efforts to predict the vertical deflection of a railway bridge based on physics-based models representing various influential factors to vertical deflection such as concrete creep and shrinkage. However, it is not an easy task because the vertical deflection of a railway bridge generally involves several sources of uncertainty. This paper proposes a probabilistic method that employs a Gaussian process to construct a model to predict the vertical deflection of a railway bridge based on actual vision-based measurement and temperature. To deal with the sources of uncertainty which may cause prediction errors, a Gaussian process is modeled with multiple kernels and hyperparameters. Once the hyperparameters are identified through the Gaussian process regression using training data, the proposed method provides a 95% prediction interval as well as a predictive mean about the vertical deflection of the bridge. The proposed method is applied to an arch bridge under operation for high-speed trains in South Korea. The analysis results obtained from the proposed method show good agreement with the actual measurement data on the vertical deflection of the example bridge, and the prediction results can be utilized for decision-making on railway bridge maintenance.

Long-Term Deflection Prediction from Computer Vision-Measured Data History for High-Speed Railway Bridges.

Science.gov (United States)

Lee, Jaebeom; Lee, Kyoung-Chan; Lee, Young-Joo

2018-05-09

Management of the vertical long-term deflection of a high-speed railway bridge is a crucial factor to guarantee traffic safety and passenger comfort. Therefore, there have been efforts to predict the vertical deflection of a railway bridge based on physics-based models representing various influential factors to vertical deflection such as concrete creep and shrinkage. However, it is not an easy task because the vertical deflection of a railway bridge generally involves several sources of uncertainty. This paper proposes a probabilistic method that employs a Gaussian process to construct a model to predict the vertical deflection of a railway bridge based on actual vision-based measurement and temperature. To deal with the sources of uncertainty which may cause prediction errors, a Gaussian process is modeled with multiple kernels and hyperparameters. Once the hyperparameters are identified through the Gaussian process regression using training data, the proposed method provides a 95% prediction interval as well as a predictive mean about the vertical deflection of the bridge. The proposed method is applied to an arch bridge under operation for high-speed trains in South Korea. The analysis results obtained from the proposed method show good agreement with the actual measurement data on the vertical deflection of the example bridge, and the prediction results can be utilized for decision-making on railway bridge maintenance.

Proactive Traffic Information Control in Emergency Evacuation Network

Directory of Open Access Journals (Sweden)

Zhengfeng Huang

2015-01-01

Full Text Available Traffic demand in emergency evacuation is usually too large to be effectively managed with reactive traffic information control methods. These methods adapt to the road traffic passively by publishing real-time information without consideration of the routing behavior feedback produced by evacuees. Other remedy measures have to be prepared in case of nonrecurring congestion under these methods. To use the network capacity fully to mitigate near-future evacuation traffic congestion, we propose proactive traffic information control (PTIC model. Based on the mechanism between information and routing behavior feedback, this model can change the route choice of evacuees in advance by dissipating strategic traffic information. Generally, the near-future traffic condition is difficult to accurately predict because it is uncertain in evacuation. Assume that the value of traffic information obeys certain distribution within a range, and then real-time traffic information may reflect the most-likely near-future traffic condition. Unlike the real-time information, the proactive traffic information is a selection within the range to achieve a desired level of the road network performance index (total system travel time. In the aspect of the solution algorithm, differential equilibrium decomposed optimization (D-EDO is proposed to compare with other heuristic methods. A field study on a road network around a large stadium is used to validate the PTIC.

Logistic centres in the Hungarian traffic network -A Current Smvey

Directory of Open Access Journals (Sweden)

Geza Schubert

2003-07-01

Full Text Available As Europe's economic integration proceeds, Hungary- situatedin the continent's geometric centre - is called upon to accommodatea huge volume of transit traffic. Congestion on thecountry's highways, already a serious problem, makes it desirableto shift transit freight traffic onto railways. For this purpose,and also to make transportation generally more efficient,the so-called logistic service centres are being established. Theseare expected to play a decisive role in the European freight trafficnetwork. An expeditious extension of their services is urgentlyneeded.

Control of Networked Traffic Flow Distribution - A Stochastic Distribution System Perspective

Energy Technology Data Exchange (ETDEWEB)

Wang, Hong [Pacific Northwest National Laboratory (PNNL); Aziz, H M Abdul [ORNL; Young, Stan [National Renewable Energy Laboratory (NREL); Patil, Sagar [Pacific Northwest National Laboratory (PNNL)

2017-10-01

Networked traffic flow is a common scenario for urban transportation, where the distribution of vehicle queues either at controlled intersections or highway segments reflect the smoothness of the traffic flow in the network. At signalized intersections, the traffic queues are controlled by traffic signal control settings and effective traffic lights control would realize both smooth traffic flow and minimize fuel consumption. Funded by the Energy Efficient Mobility Systems (EEMS) program of the Vehicle Technologies Office of the US Department of Energy, we performed a preliminary investigation on the modelling and control framework in context of urban network of signalized intersections. In specific, we developed a recursive input-output traffic queueing models. The queue formation can be modeled as a stochastic process where the number of vehicles entering each intersection is a random number. Further, we proposed a preliminary B-Spline stochastic model for a one-way single-lane corridor traffic system based on theory of stochastic distribution control.. It has been shown that the developed stochastic model would provide the optimal probability density function (PDF) of the traffic queueing length as a dynamic function of the traffic signal setting parameters. Based upon such a stochastic distribution model, we have proposed a preliminary closed loop framework on stochastic distribution control for the traffic queueing system to make the traffic queueing length PDF follow a target PDF that potentially realizes the smooth traffic flow distribution in a concerned corridor.

Discrete event model-based simulation for train movement on a single-line railway

International Nuclear Information System (INIS)

Xu Xiao-Ming; Li Ke-Ping; Yang Li-Xing

2014-01-01

The aim of this paper is to present a discrete event model-based approach to simulate train movement with the considered energy-saving factor. We conduct extensive case studies to show the dynamic characteristics of the traffic flow and demonstrate the effectiveness of the proposed approach. The simulation results indicate that the proposed discrete event model-based simulation approach is suitable for characterizing the movements of a group of trains on a single railway line with less iterations and CPU time. Additionally, some other qualitative and quantitative characteristics are investigated. In particular, because of the cumulative influence from the previous trains, the following trains should be accelerated or braked frequently to control the headway distance, leading to more energy consumption. (general)

A Sarsa(λ)-based control model for real-time traffic light coordination.

Science.gov (United States)

Zhou, Xiaoke; Zhu, Fei; Liu, Quan; Fu, Yuchen; Huang, Wei

2014-01-01

Traffic problems often occur due to the traffic demands by the outnumbered vehicles on road. Maximizing traffic flow and minimizing the average waiting time are the goals of intelligent traffic control. Each junction wants to get larger traffic flow. During the course, junctions form a policy of coordination as well as constraints for adjacent junctions to maximize their own interests. A good traffic signal timing policy is helpful to solve the problem. However, as there are so many factors that can affect the traffic control model, it is difficult to find the optimal solution. The disability of traffic light controllers to learn from past experiences caused them to be unable to adaptively fit dynamic changes of traffic flow. Considering dynamic characteristics of the actual traffic environment, reinforcement learning algorithm based traffic control approach can be applied to get optimal scheduling policy. The proposed Sarsa(λ)-based real-time traffic control optimization model can maintain the traffic signal timing policy more effectively. The Sarsa(λ)-based model gains traffic cost of the vehicle, which considers delay time, the number of waiting vehicles, and the integrated saturation from its experiences to learn and determine the optimal actions. The experiment results show an inspiring improvement in traffic control, indicating the proposed model is capable of facilitating real-time dynamic traffic control.

A Sarsa(λ-Based Control Model for Real-Time Traffic Light Coordination

Directory of Open Access Journals (Sweden)

Xiaoke Zhou

2014-01-01

Full Text Available Traffic problems often occur due to the traffic demands by the outnumbered vehicles on road. Maximizing traffic flow and minimizing the average waiting time are the goals of intelligent traffic control. Each junction wants to get larger traffic flow. During the course, junctions form a policy of coordination as well as constraints for adjacent junctions to maximize their own interests. A good traffic signal timing policy is helpful to solve the problem. However, as there are so many factors that can affect the traffic control model, it is difficult to find the optimal solution. The disability of traffic light controllers to learn from past experiences caused them to be unable to adaptively fit dynamic changes of traffic flow. Considering dynamic characteristics of the actual traffic environment, reinforcement learning algorithm based traffic control approach can be applied to get optimal scheduling policy. The proposed Sarsa(λ-based real-time traffic control optimization model can maintain the traffic signal timing policy more effectively. The Sarsa(λ-based model gains traffic cost of the vehicle, which considers delay time, the number of waiting vehicles, and the integrated saturation from its experiences to learn and determine the optimal actions. The experiment results show an inspiring improvement in traffic control, indicating the proposed model is capable of facilitating real-time dynamic traffic control.

A Network Traffic Control Enhancement Approach over Bluetooth Networks

DEFF Research Database (Denmark)

Son, L.T.; Schiøler, Henrik; Madsen, Ole Brun

2003-01-01

This paper analyzes network traffic control issues in Bluetooth data networks as convex optimization problem. We formulate the problem of maximizing of total network flows and minimizing the costs of flows. An adaptive distributed network traffic control scheme is proposed as an approximated solu...... as capacity limitations and flow requirements in the network. Simulation shows that the performance of Bluetooth networks could be improved by applying the adaptive distributed network traffic control scheme...... solution of the stated optimization problem that satisfies quality of service requirements and topologically induced constraints in Bluetooth networks, such as link capacity and node resource limitations. The proposed scheme is decentralized and complies with frequent changes of topology as well......This paper analyzes network traffic control issues in Bluetooth data networks as convex optimization problem. We formulate the problem of maximizing of total network flows and minimizing the costs of flows. An adaptive distributed network traffic control scheme is proposed as an approximated...

Improving Punctuality and Transfer Reliability by Railway Timetable Optimization

NARCIS (Netherlands)

Goverde, R.M.P.

1999-01-01

The Dutch railway network is operated close to capacity with the current safety system. This leaves little space for control by process operators by which a delayed train can cause severe delay propagation. The NS currently invest a large amount in punctuality improvement of the railway operations.

TCP/IP Communication System for Controlling a Vehicular Traffic Intersection

Directory of Open Access Journals (Sweden)

Pedraza-Martínez Luis Fernando

2013-10-01

Full Text Available This paper describes the development of a prototype of a vehicular traffic controller, whose system of communication is based on the TCP/IP protocol, in order to re- motely monitor and control the operation of traffic lights for a vehicular intersection. The results show the times of communication between the central and the traffic controller. The conclusions highlight the importance of using the TCP/IP protocol in traffic light systems.

Capacity Utilization in European Railways

DEFF Research Database (Denmark)

Khadem Sameni, Melody; Landex, Alex

2013-01-01

and unprecedented approach for this aim. Relative operational efficiency of 24 European railways in capacity utilization is studied for the first time by data envelopment analysis (DEA). It deviates from previous applications of DEA in the railway industry that are conducted to analyze cost efficiency of railways....... Six DEA models quantify various aspects of micro, macro and quality of railway capacity utilization in these countries. New inputs like gross domestic product, population and area of the country help to provide a better picture of the status of railways. Passenger satisfaction data about different...... aspects of railway services in European countries has recently been quantified by European commission and are used for the first time in the literature. Invaluable insights can be inferred from the results which can provide a ground basis for railway practitioners and policy makers....

Air Traffic ControL : FAA Order 7110.65K

Science.gov (United States)

1997-07-17

This order prescribes air traffic control procedures and phraseology for use by : personnel providing air traffic control services. Controllers are required to : be familiar with the provisions of this order that pertain to their operational : respon...

Formal Methods and Safety Certification: Challenges in the Railways Domain

DEFF Research Database (Denmark)

Fantechi, Alessandro; Ferrari, Alessio; Gnesi, Stefania

2016-01-01

The railway signalling sector has historically been a source of success stories about the adoption of formal methods in the certification of software safety of computer-based control equipment.......The railway signalling sector has historically been a source of success stories about the adoption of formal methods in the certification of software safety of computer-based control equipment....

Associations between residential traffic noise exposure and smoking habits and alcohol consumption-A population-based study.

Science.gov (United States)

Roswall, Nina; Christensen, Jeppe Schultz; Bidstrup, Pernille Envold; Raaschou-Nielsen, Ole; Jensen, Steen Solvang; Tjønneland, Anne; Sørensen, Mette

2018-05-01

Traffic noise stresses and disturbs sleep. It has been associated with various diseases, and has recently also been associated with lifestyle. Hence, the association between traffic noise and disease could partly operate via a pathway of lifestyle habits, including smoking and alcohol intake. We investigated associations between modelled residential traffic noise and smoking habits and alcohol consumption. In a cohort of 57,053 participants, we performed cross-sectional analyses using data from a baseline questionnaire (1993-97), and longitudinal analyses of change between baseline and follow-up (2000-02). Smoking status (never, former, current) and intensity (tobacco, g/day) and alcohol consumption (g/day) was self-reported at baseline and follow-up. Address history from 1987-2002 for all participants were found in national registries, and road traffic and railway noise was modelled 1 and 5 years before enrolment, and from baseline to follow-up. Analyses were performed using logistic and linear regression, and adjusted for demographics, socioeconomic variables, leisure-time sports, and noise from the opposite source (road/railway). Road traffic noise exposure 5 years before baseline was positively associated with alcohol consumption (adjusted difference per 10 dB: 1.38 g/day, 95% confidence interval (CI): 1.10-1.65), smoking intensity (adjusted difference per 10 dB: 0.40 g/day, 95% CI: 0.19-0.61), and odds for being a current vs. never/former smoker at baseline (odds ratio (OR): 1.14; 95% CI: 1.10-1.17). In longitudinal analyses, we found no association between road traffic noise and change in smoking and alcohol habits. Railway noise was not associated with smoking habits and alcohol consumption, neither in cross-sectional nor in longitudinal analyses. The study suggests that long-term exposure to residential road traffic is associated with smoking habits and alcohol consumption, albeit only in cross-sectional, but not in longitudinal analyses. Copyright �

Human performance interfaces in air traffic control.

Science.gov (United States)

Chang, Yu-Hern; Yeh, Chung-Hsing

2010-01-01

This paper examines how human performance factors in air traffic control (ATC) affect each other through their mutual interactions. The paper extends the conceptual SHEL model of ergonomics to describe the ATC system as human performance interfaces in which the air traffic controllers interact with other human performance factors including other controllers, software, hardware, environment, and organisation. New research hypotheses about the relationships between human performance interfaces of the system are developed and tested on data collected from air traffic controllers, using structural equation modelling. The research result suggests that organisation influences play a more significant role than individual differences or peer influences on how the controllers interact with the software, hardware, and environment of the ATC system. There are mutual influences between the controller-software, controller-hardware, controller-environment, and controller-organisation interfaces of the ATC system, with the exception of the controller-controller interface. Research findings of this study provide practical insights in managing human performance interfaces of the ATC system in the face of internal or external change, particularly in understanding its possible consequences in relation to the interactions between human performance factors.

Fiber Bragg grating sensors for structural and railway applications

Science.gov (United States)

Tam, H. Y.; Liu, S. Y.; Guan, B. O.; Chung, W. H.; Chan, T. H.; Cheng, L. K.

2005-02-01

Historically, due to the high cost of optical devices, fiber-optics sensor systems were only employed in niche areas where conventional electrical sensors are not suitable. This scenario changed dramatically in the last few years following the explosion of the Internet which caused the rapid expansion of the optical fiber telecommunication industry and substantially driven down the cost of optical components. In recent years, fiber-optic sensors and particularly fiber Bragg grating (FBG) sensors have attracted a lot of interests and are being used in numerous applications. We have conducted several field trials of FBG sensors for railway applications and structural monitoring. About 30 FBG sensors were installed on the rail tracks of Kowloon-Canton Railway Corp. for train identification and speed measurements and the results obtained show that FBG sensors exhibit very good performance and could play a major role in the realization of "Smart Railway". FBG sensors were also installed on Hong Kong's landmark TsingMa Bridge, which is the world longest suspension bridge (2.2 km) that carries both trains and regular road traffic. The trials were carried out with a high-speed (up to 20 kHz) interrogation system based on CCD and also with a interrogation unit that based on scanning optical filter (up to 70 Hz). Forty FBGs sensors were divided into 3 arrays and installed on different parts of the bridge (suspension cable, rocker bearing and truss girders). The objectives of the field trial on the TsingMa Bridge are to monitor the strain of different parts of the bridge under railway load and highway load, and to compare the FBG sensors' performance with conventional resistive strain gauges already installed on the bridge. The measured results show that excellent agreement was obtained between the 2 types of sensors.

 Railway Reforms

DEFF Research Database (Denmark)

Asmild, Mette; Holvad, Torben; Hougaard, Jens Leth

This paper considers railway operations in 23 European countries during 1995-2001, where a series of reform initiatives were launched by the European Commission, and analyses whether these reform initiatives improved the operating efficiency of the railways. Efficiency is measured using Multi......-directional Efficiency Analysis, which enables investigation of how railway reforms affect the inefficiencies of specific cost drivers. The main findings are that the reform initiatives generally improve operating efficiency but potentially differently for different cost drivers. Specifically, the paper provides clear...

Power-Electronics Issues of Modern Electric Railway Systems

Directory of Open Access Journals (Sweden)

STEIMEL, A.

2010-05-01

Full Text Available After de-regulation of the former state-owned railways and severe restructuring of the railway industry in the last 15 years, more innovative vehicle concepts saw the light of the day. Power electronics, already formerly being a pacemaker for progress of traction vehicles, brought forth an utmost standardization of the main drive by means of the IGBT-converter-fed induction motor drive. This is independent of the railway supply voltage system or of a diesel prime mover, for locomotives, high-speed and mass-transit trains as well as for tramways. Vehicles able to operate on all four European railway voltage systems have become feasible and are used now widely. New trends as Permanent-Magnet Synchronous Motors or Medium-Frequency Transformers are discussed, and a short overlook over actual field-oriented high-performance motor control systems - including a speed-sensorless variant - is given. Power electronics dominates the field of conversion of the 16.7-Hz railway supply power, typical for Central Europe, from the 50-Hz three-phase utility grid.

Evaluation of Intersection Traffic Control Measures through Simulation

Science.gov (United States)

Asaithambi, Gowri; Sivanandan, R.

2015-12-01

Modeling traffic flow is stochastic in nature due to randomness in variables such as vehicle arrivals and speeds. Due to this and due to complex vehicular interactions and their manoeuvres, it is extremely difficult to model the traffic flow through analytical methods. To study this type of complex traffic system and vehicle interactions, simulation is considered as an effective tool. Application of homogeneous traffic models to heterogeneous traffic may not be able to capture the complex manoeuvres and interactions in such flows. Hence, a microscopic simulation model for heterogeneous traffic is developed using object oriented concepts. This simulation model acts as a tool for evaluating various control measures at signalized intersections. The present study focuses on the evaluation of Right Turn Lane (RTL) and Channelised Left Turn Lane (CLTL). A sensitivity analysis was performed to evaluate RTL and CLTL by varying the approach volumes, turn proportions and turn lane lengths. RTL is found to be advantageous only up to certain approach volumes and right-turn proportions, beyond which it is counter-productive. CLTL is found to be advantageous for lower approach volumes for all turn proportions, signifying the benefits of CLTL. It is counter-productive for higher approach volume and lower turn proportions. This study pinpoints the break-even points for various scenarios. The developed simulation model can be used as an appropriate intersection lane control tool for enhancing the efficiency of flow at intersections. This model can also be employed for scenario analysis and can be valuable to field traffic engineers in implementing vehicle-type based and lane-based traffic control measures.

Digital Model of Railway Electric Traction Lines

Science.gov (United States)

Garg, Rachana; Mahajan, Priya; Kumar, Parmod

2017-08-01

The characteristic impedance and propagation constant define the behavior of signal propagation over the transmission lines. The digital model for railway traction lines which includes railway tracks is developed, using curve fitting technique in MATLAB. The sensitivity of this model has been computed with respect to frequency. The digital sensitivity values are compared with the values of analog sensitivity. The developed model is useful for digital protection, integrated operation, control and planning of the system.

Stochastic Channel Modeling for Railway Tunnel Scenarios at 25 GHz

Directory of Open Access Journals (Sweden)

Danping He

2018-02-01

Full Text Available More people prefer using rail traffic for travel or for commuting owing to its convenience and flexibility. The railway scenario has become an important communication scenario in the fifth generation era. The communication system should be designed to support high‐data‐rate demands with seamless connectivity at a high mobility. In this paper, the channel characteristics are studied and modeled for the railway tunnel scenario with straight and curved route shapes. On the basis of measurements using the “Mobile Hotspot Network” system, a three‐dimensional ray tracer (RT is calibrated and validated for the target scenarios. More channel characteristics are explored via RT simulations at 25.25 GHz with a 500‐MHz bandwidth. The key channel parameters are extracted, provided, and incorporated into a 3rd‐Generation‐Partnership‐Project‐like stochastic channel generator. The necessary channel information can be practically realized, which can support the link‐level and system‐level design of the communication system in similar scenarios.

Cognitive process modelling of controllers in en route air traffic control.

Science.gov (United States)

Inoue, Satoru; Furuta, Kazuo; Nakata, Keiichi; Kanno, Taro; Aoyama, Hisae; Brown, Mark

2012-01-01

In recent years, various efforts have been made in air traffic control (ATC) to maintain traffic safety and efficiency in the face of increasing air traffic demands. ATC is a complex process that depends to a large degree on human capabilities, and so understanding how controllers carry out their tasks is an important issue in the design and development of ATC systems. In particular, the human factor is considered to be a serious problem in ATC safety and has been identified as a causal factor in both major and minor incidents. There is, therefore, a need to analyse the mechanisms by which errors occur due to complex factors and to develop systems that can deal with these errors. From the cognitive process perspective, it is essential that system developers have an understanding of the more complex working processes that involve the cooperative work of multiple controllers. Distributed cognition is a methodological framework for analysing cognitive processes that span multiple actors mediated by technology. In this research, we attempt to analyse and model interactions that take place in en route ATC systems based on distributed cognition. We examine the functional problems in an ATC system from a human factors perspective, and conclude by identifying certain measures by which to address these problems. This research focuses on the analysis of air traffic controllers' tasks for en route ATC and modelling controllers' cognitive processes. This research focuses on an experimental study to gain a better understanding of controllers' cognitive processes in air traffic control. We conducted ethnographic observations and then analysed the data to develop a model of controllers' cognitive process. This analysis revealed that strategic routines are applicable to decision making.

Brazilian air traffic controllers exhibit excessive sleepiness.

Science.gov (United States)

Ribas, Valdenilson Ribeiro; de Almeida, Cláudia Ângela Vilela; Martins, Hugo André de Lima; Alves, Carlos Frederico de Oliveira; Alves, Marcos José Pinheiro Cândido; Carneiro, Severino Marcos de Oliveira; Ribas, Valéria Ribeiro; de Vasconcelos, Carlos Augusto Carvalho; Sougey, Everton Botelho; de Castro, Raul Manhães

2011-01-01

Excessive sleepiness (ES) is an increased tendency to initiate involuntary sleep for naps at inappropriate times. The objective of this study was to assess ES in air traffic controllers (ATCo). 45 flight protection professionals were evaluated, comprising 30 ATCo, subdivided into ATCo with ten or more years in the profession (ATCo≥10, n=15) and ATCo with less than ten years in the profession (ATCoair traffic controllers exhibit excessive sleepiness.

Evaluation of ETCS performance with LTE as alternative railway communication network using OPNET

DEFF Research Database (Denmark)

Sniady, Aleksander; Soler, José

2013-01-01

GSM-Railways (GSM-R) is a communication mobile network designed to fulfill specific communication needs of railways. GSM-R is being widely deployed across Europe and other countries around the world for providing railway voice and train control services (ETCS). Despite that, GSM-R already shows...

A semi-active control suspension system for railway vehicles with magnetorheological fluid dampers

Science.gov (United States)

Wei, Xiukun; Zhu, Ming; Jia, Limin

2016-07-01

The high-speed train has achieved great progress in the last decades. It is one of the most important modes of transportation between cities. With the rapid development of the high-speed train, its safety issue is paid much more attention than ever before. To improve the stability of the vehicle with high speed, extra dampers (i.e. anti-hunting damper) are used in the traditional bogies with passive suspension system. However, the curving performance of the vehicle is undermined due to the extra lateral force generated by the dampers. The active suspension systems proposed in the last decades attempt to solve the vehicle steering issue. However, the active suspension systems need extra actuators driven by electrical power or hydraulic power. There are some implementation and even safety issues which are not easy to be overcome. In this paper, an innovative semi-active controlled lateral suspension system for railway vehicles is proposed. Four magnetorheological fluid dampers are fixed to the primary suspension system of each bogie. They are controlled by online controllers for enhancing the running stability on the straight track line on the one hand and further improving the curving performance by controlling the damper force on the other hand. Two control strategies are proposed in the light of the pure rolling concept. The effectiveness of the proposed strategies is demonstrated by SIMPACK and Matlab co-simulation for a full railway vehicle with two conventional bogies.

A hierarchical framework for air traffic control

Science.gov (United States)

Roy, Kaushik

Air travel in recent years has been plagued by record delays, with over $8 billion in direct operating costs being attributed to 100 million flight delay minutes in 2007. Major contributing factors to delay include weather, congestion, and aging infrastructure; the Next Generation Air Transportation System (NextGen) aims to alleviate these delays through an upgrade of the air traffic control system. Changes to large-scale networked systems such as air traffic control are complicated by the need for coordinated solutions over disparate temporal and spatial scales. Individual air traffic controllers must ensure aircraft maintain safe separation locally with a time horizon of seconds to minutes, whereas regional plans are formulated to efficiently route flows of aircraft around weather and congestion on the order of every hour. More efficient control algorithms that provide a coordinated solution are required to safely handle a larger number of aircraft in a fixed amount of airspace. Improved estimation algorithms are also needed to provide accurate aircraft state information and situational awareness for human controllers. A hierarchical framework is developed to simultaneously solve the sometimes conflicting goals of regional efficiency and local safety. Careful attention is given in defining the interactions between the layers of this hierarchy. In this way, solutions to individual air traffic problems can be targeted and implemented as needed. First, the regional traffic flow management problem is posed as an optimization problem and shown to be NP-Hard. Approximation methods based on aggregate flow models are developed to enable real-time implementation of algorithms that reduce the impact of congestion and adverse weather. Second, the local trajectory design problem is solved using a novel slot-based sector model. This model is used to analyze sector capacity under varying traffic patterns, providing a more comprehensive understanding of how increased automation

A study of modelling simplifications in ground vibration predictions for railway traffic at grade

Science.gov (United States)

Germonpré, M.; Degrande, G.; Lombaert, G.

2017-10-01

Accurate computational models are required to predict ground-borne vibration due to railway traffic. Such models generally require a substantial computational effort. Therefore, much research has focused on developing computationally efficient methods, by either exploiting the regularity of the problem geometry in the direction along the track or assuming a simplified track structure. This paper investigates the modelling errors caused by commonly made simplifications of the track geometry. A case study is presented investigating a ballasted track in an excavation. The soil underneath the ballast is stiffened by a lime treatment. First, periodic track models with different cross sections are analyzed, revealing that a prediction of the rail receptance only requires an accurate representation of the soil layering directly underneath the ballast. A much more detailed representation of the cross sectional geometry is required, however, to calculate vibration transfer from track to free field. Second, simplifications in the longitudinal track direction are investigated by comparing 2.5D and periodic track models. This comparison shows that the 2.5D model slightly overestimates the track stiffness, while the transfer functions between track and free field are well predicted. Using a 2.5D model to predict the response during a train passage leads to an overestimation of both train-track interaction forces and free field vibrations. A combined periodic/2.5D approach is therefore proposed in this paper. First, the dynamic axle loads are computed by solving the train-track interaction problem with a periodic model. Next, the vibration transfer to the free field is computed with a 2.5D model. This combined periodic/2.5D approach only introduces small modelling errors compared to an approach in which a periodic model is used in both steps, while significantly reducing the computational cost.

Traffic improvement and transportation pollution control in Xiamen

Energy Technology Data Exchange (ETDEWEB)

Dongxing Yuan; Zilin, Wu

1996-12-31

in this paper, the urban traffic improvement and transportation control in Xiamen are highlighted. Xiamen is a port city and an economical special zone of China. As the economy grows, the transportation is developing dramatically and becoming the key for further economic development. The air quality is threatened by the rapid growth of the vehicles in the city. The most urgent task in improving urban traffic is to establish a sound traffic system. The municipal government takes great effort to improve the traffic condition, as well as to reduce green house gases and protect air environment. Some management and technical measures are carried out. Those management measures are mainly as follows: (1) systematic planning of the city arrangement and city functional division, and integrated planning of the urban roads system, (2) putting great emphasis on tail gas monitoring and management, and (3) establishing optimized utilization of motor vehicles. Those included in the main technical measures are (1) making the roads clear, (2) enlarging traffic capacity, and (3) developing the public transport. The most urgent task in improving urban traffic is to establish a sound traffic system. The city municipal government and Transportation Management Bureau plan to make a series of reforms to improve the urban traffic condition, such as building high quality road around the city, reducing the number of one way roads and replacing gasoline buses with electric buses. An optimized traffic system of Xiamen, taking public transport as the main means, is the key to meet the needs of both traffic improvement and urban transportation pollution control.

Võitlus Tartu–Petseri raudtee ümber 1920. aastatel / The struggle for the Tartu–Pechory railway in the 1920s

Directory of Open Access Journals (Sweden)

Kersti Taal

2012-01-01

Full Text Available The railway first reached Estonia in 1870, when the Tallinn–St. Petersburg line was opened on 24 October. As early as 1849 and 1857, Fr. R. Kreutzwald and J. W. Jannsen had introduced the Estonians to a steam carriage moving on rails. Both men considered railway very important both from the point of view of traffic flow and economy. The railway soon reached the southern part of the Government of Livonia. The Tapa–Tartu railway was completed in 1876, and in 1888, Tartu got a railway connection with Riga via Valga. People dreamt of a Tallinn–Pskov railway via Pechory as early as the last decades of the 19th century, but the actual construction began only in the late 1920s. As early as 1920, the route of the Tartu–Pechory railway was marked at ground level, but the construction failed to begin due to economic difficulties. Transit to Russia was also considered (Tallinn–Moscow direct line. Early in 1928, people in south-eastern Estonia (Põlva, Kanepi, Kambja, and Räpina parishes became active in their demands for rail connections. Meetings were arranged, signatures gathered, and petitions sent to the Prime Minister, the government and ministries. In the petitions sent early in the year, the reasons given for the importance of the railway for the region were economic and strategic. The railway was considered so important that each village and small town wanted it to pass them as near to them as possible. The eastern route via Kauksi was supported by the people in Räpina parish, whereas the western route via Põlva was favoured by the people in Põlva parish, as well as, by the communes in Kanepi and Kambja parishes. On 25 May 1928, the Third Estonian Parliament passed the Railway Network Development Act, but it did not fix precisely the middle section of the route. The marking of the route began in June; the engineers who worked on it proposed that the railway should be built along the western route: it would be considerably cheaper

78 FR 56769 - South Carolina Division of Public Railways, d/b/a Palmetto Railways-Intra-Corporate Family...

Science.gov (United States)

2013-09-13

... Cooper and Berkeley Railroad Company South Carolina Division of Public Railways, d/b/a Palmetto Railways... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35762] South Carolina Division of Public Railways, d/b/a Palmetto Railways--Intra-Corporate Family Transaction Exemption--The...

Measurement of Temporal Awareness in Air Traffic Control

Science.gov (United States)

Rantanen, E.M.

2009-01-01

Temporal awareness, or level 3 situation awareness, is critical to successful control of air traffic, yet the construct remains ill-defined and difficult to measure. This research sought evidence for air traffic controllers awareness of temporal characteristics of their tasks in data from a high-fidelity system evaluation simulation. Five teams of controllers worked on four scenarios with different traffic load. Several temporal parameters were defined for each task controllers performed during a simulation run and their actions on the tasks were timed relative to them. Controllers showed a strong tendency to prioritize tasks according to a first come, first served principle. This trend persisted as task load increased. Also evident was awareness of the urgency of tasks, as tasks with impending closing of a window of opportunity were performed before tasks that had longer time available before closing of the window.

Performance evaluation of traffic sensing and control devices.

Science.gov (United States)

2011-01-01

High quality vehicle detection is essential to properly operate actuated phases at traffic signals and to facilitate effective : management of technician and engineering resources. INDOT operates over 2600 traffic signal controllers, approximately 20...

Multiagent reinforcement learning for urban traffic control using coordination graphs

NARCIS (Netherlands)

Kuyer, L.; Whiteson, S.; Bakker, B.; Vlassis, N.

2008-01-01

Since traffic jams are ubiquitous in the modern world, optimizing the behavior of traffic lights for efficient traffic flow is a critically important goal. Though most current traffic lights use simple heuristic protocols, more efficient controllers can be discovered automatically via multiagent

Design and Operational Evaluation of the Traffic Management Advisor at the Ft. Worth Air Route Traffic Control Center

Science.gov (United States)

Swenson, Harry N.; Vincent, Danny; Tobias, Leonard (Technical Monitor)

1997-01-01

NASA and the FAA have designed and developed and an automation tool known as the Traffic Management Advisor (TMA). The system was operationally evaluated at the Ft. Worth Air Route Traffic Control Center (ARTCC). The TMA is a time-based strategic planning tool that provides Traffic Management Coordinators and En Route Air Traffic Controllers the ability to efficiently optimize the capacity of a demand impacted airport. The TMA consists of trajectory prediction, constraint-based runway scheduling, traffic flow visualization and controllers advisories. The TMA was used and operationally evaluated for forty-one rush traffic periods during a one month period in the Summer of 1996. The evaluations included all shifts of air traffic operations as well as periods of inclement weather. Performance data was collected for engineering and human factor analysis and compared with similar operations without the TMA. The engineering data indicates that the operations with the TMA show a one to two minute per aircraft delay reduction during rush periods. The human factor data indicate a perceived reduction in en route controller workload as well as an increase in job satisfaction. Upon completion of the evaluation, the TMA has become part of the normal operations at the Ft. Worth ARTCC.

Fatal accidents at railway level crossings in Great Britain 1946-2009.

Science.gov (United States)

Evans, Andrew W

2011-09-01

This paper investigates fatal accidents and fatalities at level crossings in Great Britain over the 64-year period 1946-2009. The numbers of fatal accidents and fatalities per year fell by about 65% in the first half of that period, but since then have remained more or less constant at about 11 fatal accidents and 12 fatalities per year. At the same time other types of railway fatalities have fallen, so level crossings represent a growing proportion of the total. Nevertheless, Britain's level crossing safety performance remains good by international standards. The paper classifies level crossings into three types: railway-controlled, automatic, and passive. The safety performance of the three types of crossings has been very different. Railway-controlled crossings are the best-performing crossing type, with falling fatal accident rates. Automatic crossings have higher accident rates per crossing than railway controlled or passive crossings, and the accident rates have not decreased. Passive crossings are by far the most numerous, but many have low usage by road users. Their fatal accident rate has remained remarkably constant over the whole period at about 0.9 fatal accidents per 1000 crossings per year. A principal reason why fatal accidents and fatalities have not fallen in the second half of the period as they did in the first half is the increase in the number of automatic crossings, replacing the safer railway controlled crossings on some public roads. However, it does not follow that this replacement was a mistake, because automatic crossings have advantages over controlled crossings in reducing delays to road users and in not needing staff. Based on the trends for each type of crossing and for pedestrian and non-pedestrian accidents separately, in 2009 a mean of about 5% of fatal accidents were at railway controlled crossings, 52% were at automatic crossings, and 43% were at passive crossings. Fatalities had similar proportions. About 60% of fatalities were

The design of traffic signal coordinated control

Science.gov (United States)

Guo, Xueting; Sun, Hongsheng; Wang, Xifu

2017-05-01

Traffic as the tertiary industry is an important pillar industry to support the normal development of the economy. But now China's road traffic development and economic development has shown a great imbalance and fault phenomenon, which greatly inhibited the normal development of China's economy. Now in many large and medium-sized cities in China are implementing green belt construction. The so-called green band is when the road conditions to meet the conditions for the establishment of the green band, the sections of the intersection of several planning to a traffic coordination control system, so that when the driver at a specific speed can be achieved without stopping the continuous Through the intersection. Green belt can effectively reduce the delay and queuing length of vehicle driving, the normal function of urban roads and reduce the economic losses caused by traffic congestion is a great help. In this paper, the theoretical basis of the design of the coordinated control system is described. Secondly, the green time offset is calculated by the analytic method and the green band is established. And then the VISSIM software is used to simulate the traffic system before and after the improvement. Finally, the results of the two simulations are compared.

Decentralized Traffic Management: A Synchronization-Based Intersection Control --- Extended Version

OpenAIRE

Tlig , Mohamed; Buffet , Olivier; Simonin , Olivier

2014-01-01

Controlling the vehicle traffic in large networks remains an important challenge in urban environments and transportation systems. Autonomous vehicles are today considered as a promising approach to deal with traffic control. In this paper, we propose a synchronization-based intersection control mechanism to allow the autonomous vehicle-agents to cross without stopping, i.e., in order to avoid congestions (delays) and energy loss. We decentralize the problem by managing the traffic of each in...

Development of Traffic Accidents Control System

Directory of Open Access Journals (Sweden)

Andrey Borisovich Nikolaev

2015-05-01

Full Text Available Proposed a structure of traffic accidents control system included three main parts: pre-processing, decision support and monitoring. For decision support systems we propose a method that allows to make decisions on the basis of fuzzy situational management. The advantage of the method: it allows to formalize a set of typical traffic situations, using the theory of fuzzy sets and to carry out selection of the desired management action.

76 FR 6517 - Carolina Coastal Railway, Inc.-Lease and Operation Exemption-Norfolk Southern Railway Company

Science.gov (United States)

2011-02-04

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35461] Carolina Coastal Railway, Inc.--Lease and Operation Exemption-- Norfolk Southern Railway Company Carolina Coastal Railway, Inc. (CLNA), a Class III carrier, has filed a verified notice of exemption \\1\\ under 49 CFR 1150.41 to...

Automatic Verification of Railway Interlocking Systems: A Case Study

DEFF Research Database (Denmark)

Petersen, Jakob Lyng

1998-01-01

This paper presents experiences in applying formal verification to a large industrial piece of software. The are of application is railway interlocking systems. We try to prove requirements of the program controlling the Swedish railway Station Alingsås by using the decision procedure which...... express thoughts on what is needed in order to be able to successfully verify large real-life systems....

Continuous residual reinforcement learning for traffic signal control optimization

NARCIS (Netherlands)

Aslani, Mohammad; Seipel, Stefan; Wiering, Marco

2018-01-01

Traffic signal control can be naturally regarded as a reinforcement learning problem. Unfortunately, it is one of the most difficult classes of reinforcement learning problems owing to its large state space. A straightforward approach to address this challenge is to control traffic signals based on

Safety motion increase of trains by improvement diagnostics process devices of railway automation

Directory of Open Access Journals (Sweden)

B.M.Bondarenko

2012-12-01

Full Text Available The complex use of methods of nondestructive check for the automated diagnostics electromagnetic relays of railway automation the first class reliability is offered. The methods determination of their mechanical parameters are resulted, that allows to exclude a human factor from the control, promote reliability of devices railway automation and safety motion of railway transport.

77 FR 68886 - Aiken Railway Company, LLC-Lease and Operation Exemption-Lines of Norfolk Southern Railway...

Science.gov (United States)

2012-11-16

... Carolina Railway Service Corporation (WCRS), and Steven C. Hawkins and Cheryl R. Hawkins (collectively, the Hawkins) seek Board approval to continue in control of AIKR upon AIKR's becoming a Class III rail carrier... 5, 2012. WCRS and the Hawkins are reminded that they are not authorized to control AIKR until the...

ATC-lab(Advanced): an air traffic control simulator with realism and control.

Science.gov (United States)

Fothergill, Selina; Loft, Shayne; Neal, Andrew

2009-02-01

ATC-lab(Advanced) is a new, publicly available air traffic control (ATC) simulation package that provides both realism and experimental control. ATC-lab(Advanced) simulations are realistic to the extent that the display features (including aircraft performance) and the manner in which participants interact with the system are similar to those used in an operational environment. Experimental control allows researchers to standardize air traffic scenarios, control levels of realism, and isolate specific ATC tasks. Importantly, ATC-lab(Advanced) also provides the programming control required to cost effectively adapt simulations to serve different research purposes without the need for technical support. In addition, ATC-lab(Advanced) includes a package for training participants and mathematical spreadsheets for designing air traffic events. Preliminary studies have demonstrated that ATC-lab(Advanced) is a flexible tool for applied and basic research.

Dynamic Traffic Congestion Simulation and Dissipation Control Based on Traffic Flow Theory Model and Neural Network Data Calibration Algorithm

Directory of Open Access Journals (Sweden)

Li Wang

2017-01-01

Full Text Available Traffic congestion is a common problem in many countries, especially in big cities. At present, China’s urban road traffic accidents occur frequently, the occurrence frequency is high, the accident causes traffic congestion, and accidents cause traffic congestion and vice versa. The occurrence of traffic accidents usually leads to the reduction of road traffic capacity and the formation of traffic bottlenecks, causing the traffic congestion. In this paper, the formation and propagation of traffic congestion are simulated by using the improved medium traffic model, and the control strategy of congestion dissipation is studied. From the point of view of quantitative traffic congestion, the paper provides the fact that the simulation platform of urban traffic integration is constructed, and a feasible data analysis, learning, and parameter calibration method based on RBF neural network is proposed, which is used to determine the corresponding decision support system. The simulation results prove that the control strategy proposed in this paper is effective and feasible. According to the temporal and spatial evolution of the paper, we can see that the network has been improved on the whole.

Comparision by Simulation of Different Approaches to the Urban Traffic Control

Czech Academy of Sciences Publication Activity Database

Přikryl, Jan; Tichý, T.; Bělinová, Z.; Kapitán, J.

2012-01-01

Roč. 5, č. 4 (2012), s. 26-30 ISSN 1899-8208 R&D Projects: GA TA ČR TA01030603 Institutional support: RVO:67985556 Keywords : traffic * ITS * telematics * urban traffic control Subject RIV: BC - Control Systems Theory http://library.utia.cas.cz/separaty/2012/AS/prikryl-comparision by simulation of different approaches to the urban traffic control.pdf

Traffic noise control of a city

International Nuclear Information System (INIS)

Ahmed, A.; Khan, J.A.; Lakhani, A.H.; Hyder, F.G.; Shamsuddin, S.A.

2003-01-01

Long exposure to noise due to traffic affects our health and comfort. A noise level up to 45 dB is acceptable for the buildings in the city. A traffic noise study was conducted in Karachi at places of high traffic flow. The noise level was between 75-85 dB. Residential and commercial buildings had sound level up to 79 dB. Reducing vehicle noise by using proper muffler and acoustic treatment should first control traffic noise. Then noise can be reduced by 10-15 dB by constructing barriers of wood or concrete along roadside. Barrier height for sound attenuation can be found from Fresnel Number. The barrier reduces noise better if width at the top is increased and an inward bend of 60 degree is placed at the top. Where feasible a 4-5 meter high concrete barrier is recommended otherwise the nearby buildings from the road should be insulated and acoustically treated. (author)

Breakdowns in Coordination Between Air Traffic Controllers

Science.gov (United States)

Bearman, Chris; Orasanu, Judith; Miller, Ronald C.

2011-01-01

This talk outlines the complexity of coordination in air traffic control, introduces the NextGen technologies, identifies common causes for coordination breakdowns in air traffic control and examines whether these causes are likely to be reduced with the introduction of NextGen technologies. While some of the common causes of breakdowns will be reduced in a NextGen environment this conclusion should be drawn carefully given the current stage of development of the technologies and the observation that new technologies often shift problems rather than reduce them.

Engineering Social Justice into Traffic Control for Self-Driving Vehicles?

Science.gov (United States)

Mladenovic, Milos N; McPherson, Tristram

2016-08-01

The convergence of computing, sensing, and communication technology will soon permit large-scale deployment of self-driving vehicles. This will in turn permit a radical transformation of traffic control technology. This paper makes a case for the importance of addressing questions of social justice in this transformation, and sketches a preliminary framework for doing so. We explain how new forms of traffic control technology have potential implications for several dimensions of social justice, including safety, sustainability, privacy, efficiency, and equal access. Our central focus is on efficiency and equal access as desiderata for traffic control design. We explain the limitations of conventional traffic control in meeting these desiderata, and sketch a preliminary vision for a next-generation traffic control tailored to address better the demands of social justice. One component of this vision is cooperative, hierarchically distributed self-organization among vehicles. Another component of this vision is a priority system enabling selection of priority levels by the user for each vehicle trip in the network, based on the supporting structure of non-monetary credits.

76 FR 13271 - Gulf & Ohio Railways, Inc., H. Peter Claussen and Linda C. Claussen-Continuance in Control...

Science.gov (United States)

2011-03-10

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35414] Gulf & Ohio Railways, Inc., H. Peter Claussen and Linda C. Claussen--Continuance in Control Exemption--Lancaster & Chester Railroad, LLC AGENCY: Surface Transportation Board, DOT. ACTION: Correction to notice of exemption...

Adaptive Traffic Signal Control: Deep Reinforcement Learning Algorithm with Experience Replay and Target Network

OpenAIRE

Gao, Juntao; Shen, Yulong; Liu, Jia; Ito, Minoru; Shiratori, Norio

2017-01-01

Adaptive traffic signal control, which adjusts traffic signal timing according to real-time traffic, has been shown to be an effective method to reduce traffic congestion. Available works on adaptive traffic signal control make responsive traffic signal control decisions based on human-crafted features (e.g. vehicle queue length). However, human-crafted features are abstractions of raw traffic data (e.g., position and speed of vehicles), which ignore some useful traffic information and lead t...

Rail-induced Traffic in China

Directory of Open Access Journals (Sweden)

Nan He

2017-11-01

Full Text Available The rapid development of China’s railway has exerted an enormous influence on the intercity passenger transport structure in recent years. However, it has not satisfied the passengers’ travel demand due to induced traffic. This paper is committed to solving such issue, with the aim of satisfying the current travel demand, and of anticipating the demand of the predicted traffic growth over the next 20 to 30 years. The paper has considered the increase in rail passenger kilometres caused by the growth of rail kilometres as rail-induced traffic. Based on the concept and former research of induced traffic, the panel data of 26 provinces and 3 municipalities of China between the year 2000 and 2014 were collected, and the elasticity models (including elasticity-based model, distributed lag model, high-speed rail (HSR elasticity model and rail efficiency model have been constructed. The results show the importance of model formation incorporation of rail-induced traffic. It is better to get the correct value in divided zones with different train frequencies or incorporation rail efficiency in cities or provinces. The lag time and rail types also need to be considered. In summary, the results analysis not only confirms the existence of rail-induced traffic, but also provides substantial recommendations to train operation planning.

Systematic review of research on railway and urban transit system suicides.

Science.gov (United States)

Mishara, Brian L; Bardon, Cécile

2016-03-15

indicators of suicide risk in attempters on railway property, and studies of how suicidal people on railway property are prevented from suicide. Changing beliefs and attitudes about railway suicides, reducing media reports, offering help onsite, controlling access at hotspots and better staff training in mental health facilities near tracks are promising prevention strategies. However, local specificities must be considered in planning prevention strategies. Copyright © 2016 Elsevier B.V. All rights reserved.

Fuzzy Logic Based Autonomous Traffic Control System

Directory of Open Access Journals (Sweden)

Muhammad ABBAS

2012-01-01

Full Text Available The aim of this paper is to design and implement fuzzy logic based traffic light Control system to solve the traffic congestion issues. In this system four input parameters: Arrival, Queue, Pedestrian and Emergency Vehicle and two output parameters: Extension in Green and Pedestrian Signals are used. Using Fuzzy Rule Base, the system extends or terminates the Green Signal according to the Traffic situation at the junction. On the presence of emergency vehicle, the system decides which signal(s should be red and how much an extension should be given to Green Signal for Emergency Vehicle. The system also monitors the density of people and makes decisions accordingly. In order to verify the proposed design algorithm MATLAB simulation is adopted and results obtained show concurrency to the calculated values according to the Mamdani Model of the Fuzzy Control System.

A Multi-Agent Traffic Control Model Based on Distributed System

Directory of Open Access Journals (Sweden)

Qian WU

2014-06-01

Full Text Available With the development of urbanization construction, urban travel has become a quite thorny and imminent problem. Some previous researches on the large urban traffic systems easily change into NPC problems. We purpose a multi-agent inductive control model based on the distributed approach. To describe the real traffic scene, this model designs four different types of intelligent agents, i.e. we regard each lane, route, intersection and traffic region as different types of intelligent agents. Each agent can achieve the real-time traffic data from its neighbor agents, and decision-making agents establish real-time traffic signal plans through the communication between local agents and their neighbor agents. To evaluate the traffic system, this paper takes the average delay, the stopped time and the average speed as performance parameters. Finally, the distributed multi-agent is simulated on the VISSIM simulation platform, the simulation results show that the multi-agent system is more effective than the adaptive control system in solving the traffic congestion.

Ecological Interface Design : Sensor Failure Diagnosis in Air Traffic Control

NARCIS (Netherlands)

Bijsterbosch, V.A.; Borst, C.; Mulder, M.; van Paassen, M.M.

2016-01-01

Future air traffic control will have to rely on more advanced automation in order to support controllers in their job of safely controlling increased traffic volumes. A prerequisite for the success of such automation is that the underlying data driving it is reliable. Current technology, however,

Efficient Algorithms for Network-Wide Road Traffic Control

NARCIS (Netherlands)

van de Weg, G.S.

2017-01-01

Controlling road traffic networks is a complex problem. One of the difficulties is the coordination of actuators, such as traffic lights, variables speed limits, ramp metering and route guidance, with the aim to improve the network performance over a near-future time horizon. This dissertation

design and implementation of a density-based traffic light control

African Journals Online (AJOL)

HOD

sensors, a new traffic light control system was developed to ease the flow of traffic at a particular ... of traffic on each lane at the intersection triggered when a vehicle comes between the ... change the sequence back to the normal sequence.

Studies on assessment of traffic noise level in Aurangabad city, India

Directory of Open Access Journals (Sweden)

B J Bhosale

2010-01-01

Full Text Available With the rapid rate of urbanization of Aurangabad city due to the expanding industrialization, the problem of noise pollution has become a concern for urban dwellers and government authority too. Noise pollution due to vehicular traffic is one of the growing environmental problems of urban centers. The study deals with the assessment of traffic noise levels in Aurangabad city. With respect to the total number of vehicles passing the road in unit time, which was surveyed by direct count method, six different sites from Aurangabad city, viz., Nagar Naka, Kranti Chowk, CIDCO bus stand, Railway station area, Dhoot Hospital and Baba petrol pump were selected to study the vehicular noise level. Noise measurements were carried out at these six locations on both working day and holiday during the peak traffic hours, i.e. 8:00 a.m. - 11:a.m., 1:00 p.m. - 4:00 p.m. and 5:00 p.m. - 8:00 p.m., in the morning, afternoon and evening sessions, respectively, after 5 minutes time interval. The noise level was monitored using noise level meter. The results obtained from this investigation showed that the Nagar Naka, Kranti chowk and CIDCO bus stand area have dense traffic zones when compared with the Railway station area, Dhoot Hospital and Baba petrol pump. The minimum and the maximum noise levels are 74 and 86 dB, respectively, on working day and 70 and 81 dB, respectively, on holiday. The measured noise level values exceed the prescribed noise level.

HIGH SPEED RAILWAY LINES – FUTURE PART OF CZECH RAILWAY NETWORK?

Directory of Open Access Journals (Sweden)

Lukáš Týfa

2017-08-01

Full Text Available The paper first describes high speed rail generally and explains the relationship between high speed and conventional railway networks (according to the vehicle types in operation on the network. The core of the paper is comprised of the methodology for choosing the best route for a railway line and its application to the high speed railway connection Praha – Brno. The Algorithm used assumes the existence of more route proposals, which could be different in terms of the operational conception, line routing or types of vehicles used. The optimal variant is the one with the lowest daily cost, which includes infrastructure and vehicle costs; investment and operational costs. The results from applying this model confirmed the assumption, that a dedicated high speed railway line, only for high speed trains, has the same or lower investment costs than a line for both high speed and conventional trains. Furthermore, a dedicated high line also has a lower cost for infrastructure maintenance but a higher cost for buying high speed multiple units.

STIMULATION METHODS IMPROVEMENT OF EXIT ROUTE ON RAILWAY TRANSPORT

Directory of Open Access Journals (Sweden)

A. I. Verlan

2014-01-01

Full Text Available Purpose. The purpose of the article is to assess the costs, which are redistributed in the system «shipper−railroad−consignee» during routing of rail transportation and the development of tariff simulation methods of shippers to the exit routes formation. Methodology. Using economic and mathematical analysis the distribution of costs among the various participants of transportation process during the exit routes formation is investigated in the article. Findings. For implementation of the tariff simulation methods of exit routes and retention of the existing tariff structure it is proposed to provide in the «Tariff catalogue for freight transportation by railway transport of Ukraine» the discount, differentiated from haulage distance. A new method for determining the fees amount for cars supply and removal on approach tracks by train locomotives was also offered. Originality. As a result of the research a new method for determination of the exit rout efficiency that, unlike the existing one, takes into account the various interests of the individual participants in the transportation process was proposed. The dependence of the correction factors to the tariff for freight transportation in their own cars by direct exit routes from distance haulage was obtained. Implementation of these coefficients provides an approximation of railway tariffs to the traffic handling costs. A method for determination the rate of fees for cars supply and removal on approach tracks by train locomotives was offered. Practical value. InUkraine creation of the tariff discounts system for freight transportation by exit routes consistent with international practice and allows bringing the tariff to the real traffic handling cost. This change on the one hand will provide stimulation for private capital investments in infrastructure development and shunting means of approach tracks, on the other – it will fix the shippers to the railroads and stop their outflow

An Adaptive Traffic Signal Control in a Connected Vehicle Environment: A Systematic Review

Directory of Open Access Journals (Sweden)

Peng Jing

2017-08-01

Full Text Available In the last few years, traffic congestion has become a growing concern due to increasing vehicle ownerships in urban areas. Intersections are one of the major bottlenecks that contribute to urban traffic congestion. Traditional traffic signal control systems cannot adjust the timing pattern depending on road traffic demand. This results in excessive delays for road users. Adaptive traffic signal control in a connected vehicle environment has shown a powerful ability to effectively alleviate urban traffic congestions to achieve desirable objectives (e.g., delay minimization. Connected vehicle technology, as an emerging technology, is a mobile data platform that enables the real-time data exchange among vehicles and between vehicles and infrastructure. Although several reviews about traffic signal control or connected vehicles have been written, a systemic review of adaptive traffic signal control in a connected vehicle environment has not been made. Twenty-six eligible studies searched from six databases constitute the review. A quality evaluation was established based on previous research instruments and applied to the current review. The purpose of this paper is to critically review the existing methods of adaptive traffic signal control in a connected vehicle environment and to compare the advantages or disadvantages of those methods. Further, a systematic framework on connected vehicle based adaptive traffic signal control is summarized to support the future research. Future research is needed to develop more efficient and generic adaptive traffic signal control methods in a connected vehicle environment.

A semi-empirical model for the prediction of fouling in railway ballast using GPR

Science.gov (United States)

Bianchini Ciampoli, Luca; Tosti, Fabio; Benedetto, Andrea; Alani, Amir M.; Loizos, Andreas; D'Amico, Fabrizio; Calvi, Alessandro

2016-04-01

The first step in the planning for a renewal of a railway network consists in gathering information, as effectively as possible, about the state of the railway tracks. Nowadays, this activity is mostly carried out by digging trenches at regular intervals along the whole network, to evaluate both geometrical and geotechnical properties of the railway track bed. This involves issues, mainly concerning the invasiveness of the operations, the impacts on the rail traffic, the high costs, and the low levels of significance concerning such discrete data set. Ground-penetrating radar (GPR) can represent a useful technique for overstepping these issues, as it can be directly mounted onto a train crossing the railway, and collect continuous information along the network. This study is aimed at defining an empirical model for the prediction of fouling in railway ballast, by using GPR. With this purpose, a thorough laboratory campaign was implemented within the facilities of Roma Tre University. In more details, a 1.47 m long × 1.47 m wide × 0.48 m height plexiglass framework, accounting for the domain of investigation, was laid over a perfect electric conductor, and filled up with several configuration of railway ballast and fouling material (clayey sand), thereby representing different levels of fouling. Then, the set of fouling configurations was surveyed with several GPR systems. In particular, a ground-coupled multi-channel radar (600 MHz and 1600 MHz center frequency antennas) and three air-launched radar systems (1000 MHz and 2000 MHz center frequency antennas) were employed for surveying the materials. By observing the results both in terms of time and frequency domains, interesting insights are highlighted and an empirical model, relating in particular the shape of the frequency spectrum of the signal and the percentage of fouling characterizing the surveyed material, is finally proposed. Acknowledgement The Authors thank COST, for funding the Action TU1208 "Civil

Railways: Gateways Between East and West in Europe

Directory of Open Access Journals (Sweden)

Hansjorg Kuster

2003-07-01

Full Text Available Railways have connected various far-flung parts of Europefor much of the last two centuries. Recent years, however, haveseen a decline in direct international connections. This is not somuch due to political developments (the Iron Curtain ceased toexist during the period in question, but rather technical advancesthat have resulted in the development of high-speed networksspecific to various countries. Problems associated withthe use of different gauges, and also electrical and sophisticatedelectronic systems in individual European countries have resultedin high-speed trains being confined mainly to individualstates. During the next years, it is highly desirable to re-establishan international European train or Transrapid network to avoidroad and air-traffic chaos as European integration proceedswith the planned eastwards expansion of the European Union.

Optimal Control of Hybrid Systems in Air Traffic Applications

Science.gov (United States)

Kamgarpour, Maryam

Growing concerns over the scalability of air traffic operations, air transportation fuel emissions and prices, as well as the advent of communication and sensing technologies motivate improvements to the air traffic management system. To address such improvements, in this thesis a hybrid dynamical model as an abstraction of the air traffic system is considered. Wind and hazardous weather impacts are included using a stochastic model. This thesis focuses on the design of algorithms for verification and control of hybrid and stochastic dynamical systems and the application of these algorithms to air traffic management problems. In the deterministic setting, a numerically efficient algorithm for optimal control of hybrid systems is proposed based on extensions of classical optimal control techniques. This algorithm is applied to optimize the trajectory of an Airbus 320 aircraft in the presence of wind and storms. In the stochastic setting, the verification problem of reaching a target set while avoiding obstacles (reach-avoid) is formulated as a two-player game to account for external agents' influence on system dynamics. The solution approach is applied to air traffic conflict prediction in the presence of stochastic wind. Due to the uncertainty in forecasts of the hazardous weather, and hence the unsafe regions of airspace for aircraft flight, the reach-avoid framework is extended to account for stochastic target and safe sets. This methodology is used to maximize the probability of the safety of aircraft paths through hazardous weather. Finally, the problem of modeling and optimization of arrival air traffic and runway configuration in dense airspace subject to stochastic weather data is addressed. This problem is formulated as a hybrid optimal control problem and is solved with a hierarchical approach that decouples safety and performance. As illustrated with this problem, the large scale of air traffic operations motivates future work on the efficient

Online Traffic Signal Control for Reducing Vehicle Carbon Dioxide Emissions

Science.gov (United States)

Oda, Toshihiko; Otokita, Tohru; Niikura, Satoshi

In Japan, carbon dioxide (CO2) emissions caused by vehicles have been increasing year by year and it is well known that CO2 causes a serious global warming problem. For urban traffic control systems, there is a great demand for realization of signal control measures as soon as possible due to the urgency of the recent environmental situation. This paper describes a new traffic signal control for reducing vehicle CO2 emissions on an arterial road. First, we develop a model for estimating the emissions using the traffic delay and the number of stops a driver makes. Second, to find the optimal control parameters, we introduce a random search method with rapid convergence suitable for an online traffic control. We conduct experiments in Kawasaki to verify the effectiveness of our method. The experiments show that our approach decreases not only the emissions but also congestion and travel time significantly, compared to the method implemented in the real system.

77 FR 69929 - Western Carolina Railway Service Corporation, Steven C. Hawkins and Cheryl R. Hawkins-Continuance...

Science.gov (United States)

2012-11-21

... Railway Service Corporation, Steven C. Hawkins and Cheryl R. Hawkins--Continuance in Control Exemption--Aiken Railway Company, LLC Western Carolina Railway Service Corporation (WCRS) and Steven C. Hawkins and Cheryl R. Hawkins (the Hawkins) (collectively, Applicants) have filed a verified notice of exemption...

Enhancement of organizational and technical solutions regarding anchoring of completed construction facilities of underground railway system to operating control

Directory of Open Access Journals (Sweden)

Е. Г. Козин

2017-12-01

Full Text Available Stages of practical realization of measures prescribed by requirements documents regarding anchoring of capital structures of underground railway system to operating control are considered in the article. On the basis of algorithm structure analysis, which includes obtaining a permit for putting into operation and cadastre works execution a range of solutions was proposed concerning optimization of construction project owner and operating organization activities with the purpose of terms reduction of capital structures handover to operation. The results of work of a commission responsible for completed underground railway system objects acceptance and putting into operation were analyzed. Considering example of object «Second entrance hall area of «Sportivnaya» station the statistical data of revealed snagging items is consolidated and dynamics of corrective actions is provided.Proposed solutions laid the foundation for corrections of requirements documents and were accepted for realization in the process of works acceptance of Saint-Petersburg underground railway system objects.

Assessment of potential energy efficiency improvements in the traction sector of the Swiss Federal Railways; Potentialermittlung Energieeffizienz Traktion bei den SBB - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Meyer, M.; Menth, S.; Lerjen, M.

2007-07-01

Possibilities to reduce the consumption of 16.7-Hz traction energy of Swiss Federal Railways (SBB) have been investigated. Various proposals have been discussed together with experts of SBB's Passenger, Cargo and Infrastructure divisions. Based on numerical simulations for representative train runs, the total consumption of the SBB network could be calculated and compared with real values. The possible reduction e.g. by energy optimised driving could be derived from this comparison; it is between 3 and 5 % of the specific consumption both for the influence by train driver and by traffic control. Technical measures in traction units and passenger coaches lead to reductions of up to about 3%, depending on the vehicle type. It is important that all measures take into account the extremely dense traffic on SBB's network and do not reduce the attractiveness for the customers. (author)

Delay-feedback control strategy for reducing CO2 emission of traffic flow system

Science.gov (United States)

Zhang, Li-Dong; Zhu, Wen-Xing

2015-06-01

To study the signal control strategy for reducing traffic emission theoretically, we first presented a kind of discrete traffic flow model with relative speed term based on traditional coupled map car-following model. In the model, the relative speed difference between two successive running cars is incorporated into following vehicle's acceleration running equation. Then we analyzed its stability condition with discrete control system stability theory. Third, we designed a delay-feedback controller to suppress traffic jam and decrease traffic emission based on modern controller theory. Last, numerical simulations are made to support our theoretical results, including the comparison of models' stability analysis, the influence of model type and signal control on CO2 emissions. The results show that the temporal behavior of our model is superior to other models, and the traffic signal controller has good effect on traffic jam suppression and traffic CO2 emission, which fully supports the theoretical conclusions.

Railway Track Allocation: Models and Methods

DEFF Research Database (Denmark)

Lusby, Richard Martin; Larsen, Jesper; Ehrgott, Matthias

2011-01-01

Efficiently coordinating the movement of trains on a railway network is a central part of the planning process for a railway company. This paper reviews models and methods that have been proposed in the literature to assist planners in finding train routes. Since the problem of routing trains......, and train routing problems, group them by railway network type, and discuss track allocation from a strategic, tactical, and operational level....... on a railway network entails allocating the track capacity of the network (or part thereof) over time in a conflict-free manner, all studies that model railway track allocation in some capacity are considered relevant. We hence survey work on the train timetabling, train dispatching, train platforming...

Railway Track Allocation: Models and Methods

DEFF Research Database (Denmark)

Lusby, Richard Martin; Larsen, Jesper; Ehrgott, Matthias

Eciently coordinating the movement of trains on a railway network is a central part of the planning process for a railway company. This paper reviews models and methods that have been proposed in the literature to assist planners in nding train routes. Since the problem of routing trains......, and train routing problems, group them by railway network type, and discuss track allocation from a strategic, tactical, and operational level....... on a railway network entails allocating the track capacity of the network (or part thereof) over time in a con ict-free manner, all studies that model railway track allocation in some capacity are considered relevant. We hence survey work on the train timetabling, train dispatching, train platforming...

76 FR 31678 - San Luis & Rio Grande Railroad-Continuance in Control Exemption-Saratoga and North Creek Railway...

Science.gov (United States)

2011-06-01

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35499] San Luis & Rio Grande Railroad--Continuance in Control Exemption--Saratoga and North Creek Railway, LLC San Luis & Rio Grande Railroad (SLRG), a Class III rail carrier, has filed a verified notice of exemption to continue in...

Vibrations in the urban environment controlling 222Rn migration in soils

International Nuclear Information System (INIS)

Wiegand, J.

1998-01-01

Comparable to investigations looking for a connection of 222 Rn and earthquakes, this study shows the influence of subsurface vibrations on the 222 Rn concentration of the soil-gas in urban environments. Generally, the 222 Rn concentration increases through vibrations induced by trains, street-traffic and activities at project sites. The spatial radius of the 222 Rn increase due to vibrations reach highest values at project sites where piled foundations or metal panels are rammed into the ground (> 60 m). Along railway tracks the radius is wider (> 30 m) than along heavy traffic roads ( 222 Rn concentrations in soil-gas due to vibrations is the highest at project sites (53%). Along heavy traffic roads the increase of 222 Rn concentrations by motor vehicle traffic is higher (37%) than that by railway traffic (11.5%). The maximum increase of 400% was observed in a distance of 1 m from a railway track. In the vicinity of railway tracks a difference of the vibration influence according to unconsolidated rock (11.1%) or solid rock (11.8%) was not noticed. Beside this vibration effect, the overall 222 Rn level decreases with increasing distance to the vibration source, but only at locations laying above solid rocks. The observation of the increase of 222 Rn concentrations can be explained by a 'pump effect': the mechanical vibration of soil and mineral particles leads to an upward motion of the whole volume of soil-gas. Therefore, 222 Rn is pumped out of the soil to the atmosphere and as a result the upward transport is increased. (author)

Traffic

International Nuclear Information System (INIS)

Lichtblau, G.

2001-01-01

This chapter deals with passenger and freight traffic, public and private transportation, traffic related environmental impacts, future developments, traffic indicators, regional traffic planning, health costs due to road traffic related air pollution, noise pollution, measures and regulations for traffic control and fuels for traffic. In particular energy consumption, energy efficiency, pollutant emissions ( CO 2 , SO 2 , NO x , HC, CO, N 2 O, NH 3 and particulates) and environmental effects of the different types of traffic and different types of fuels are compared and studied. Legal regulations and measures for an effective traffic control are discussed. (a.n.)

LTE for Railways: Impact on Performance of ETCS Railway Signaling

DEFF Research Database (Denmark)

Sniady, Aleksander; Soler, José

2014-01-01

The Global System for Mobile Communications-Railways (GSM-R) is an obsolete mobile technology with considerable shortcomings in terms of capacity and data transmission capabilities. Because of these shortcomings, GSM-R is becoming the element limiting the number of running trains in areas with high...... train concentration, such as major train stations. Moreover, GSM-R cannot support advanced data services. Hence, modern technologies, such as long-term evolution (LTE), have to be evaluated as possible railway communication technologies to replace GSM-R in the future. This article analyzes...... the characteristics of the LTE railway radio access network in terms of eNodeB (LTE base station) density and eNodeB transmission power. Based on this analysis, a set of computer-based simulation scenarios (e.g., OPNET) with varying numbers of eNodeBs is evaluated regarding the achieved transfer delay and data...

Robust, Optimal, Predictive, and Integrated Road Traffic Control : Research proposal

NARCIS (Netherlands)

Van de Weg, G.S.; Hegyi, A.; Hoogendoorn, S.P.

2014-01-01

The development of control strategies for traffic lights, ramp metering installations, and variable speed limits to improve the throughput of road traffic networks can contribute to a more efficient use of road networks. In this project, a hierarchical controller will be developed for the

Railway networks 2025/2030. Expansion concept for an efficient rail cargo traffic in Germany; Schienennetz 2025/2030. Ausbaukonzeption fuer einen leistungsfaehigen Schienengueterverkehr in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Holzhey, Michael [KCW GmbH, Berlin (Germany)

2010-08-15

This study investigated the need for the construction of new railway lines and expansion of the existing railway network in Germany. The target to be achieved was based on the UBA strategy of being able to absorb 213 billion tkm on the rail by 2025. The time factor is not really that important, however; what counts is the selection of a target that forces all parties concerned to make infrastructural plans and think ahead if they are convinced in principle of the advantages of railway cargo transport. (orig.)

Capacity at Railway Stations

DEFF Research Database (Denmark)

Landex, Alex

2011-01-01

zone(s) the possible conflicts with other trains (also in the opposite direction) are taken into account leading to more trustworthy results. Although the UIC 406 methodology proposes that the railway network should be divided into line sections when trains turn around and when the train order...... is changed, this paper recommends that the railway lines are not always be divided. In case trains turn around on open (single track) line, the capacity consumption may be too low if a railway line is divided. The same can be the case if only few trains are overtaken at an overtaking station. For dead end...

Optimization of traffic light control system of an intersection using ...

African Journals Online (AJOL)

This paper considers an automated static road traffic control system of an intersection for the purpose of minimizing the effects of traffic jam and hence its attendant consequences such as prolonged waiting time, emission of toxic hydrocarbons from automobiles, etc. Using real-time road traffic data, a dynamic round-robin ...

From Cellular Attractor Selection to Adaptive Signal Control for Traffic Networks.

Science.gov (United States)

Tian, Daxin; Zhou, Jianshan; Sheng, Zhengguo; Wang, Yunpeng; Ma, Jianming

2016-03-14

The management of varying traffic flows essentially depends on signal controls at intersections. However, design an optimal control that considers the dynamic nature of a traffic network and coordinates all intersections simultaneously in a centralized manner is computationally challenging. Inspired by the stable gene expressions of Escherichia coli in response to environmental changes, we explore the robustness and adaptability performance of signalized intersections by incorporating a biological mechanism in their control policies, specifically, the evolution of each intersection is induced by the dynamics governing an adaptive attractor selection in cells. We employ a mathematical model to capture such biological attractor selection and derive a generic, adaptive and distributed control algorithm which is capable of dynamically adapting signal operations for the entire dynamical traffic network. We show that the proposed scheme based on attractor selection can not only promote the balance of traffic loads on each link of the network but also allows the global network to accommodate dynamical traffic demands. Our work demonstrates the potential of bio-inspired intelligence emerging from cells and provides a deep understanding of adaptive attractor selection-based control formation that is useful to support the designs of adaptive optimization and control in other domains.

Magnetic levitation railways. 2. enlarged ed. Magnetschwebebahnen

Energy Technology Data Exchange (ETDEWEB)

Miedtank, R [comp.

1989-01-01

The bibliography contains 129 literature references, mostly with German abstracts on: Representation of the magnetic levitation railway (MAGLEV railway) as a fast modern railway; type of design of tracks and stations; manufacture of track supports made of steel and reinforced concrete with the accuracy required for this fast railway system. Introduction of experimental sections and planning study for this means of transport. (orig./HP).

An economic evaluation of setting up physical barriers in railway stations for preventing railway injury: evidence from Hong Kong.

Science.gov (United States)

Law, C K; Yip, P S F

2011-10-01

Setting physical barriers, for example platform screen doors (PSDs), has been proven to be effective in preventing falls onto railway tracks, but its cost-effectiveness is not known. For economic evaluation of public health interventions, the importance of including non-health factors has been noted despite a lack of empirical studies. This study aimed to investigate the effectiveness and cost-effectiveness of PSDs, which are installed in part of the Hong Kong railway system, for preventing railway injuries. Data on railway injuries from 1997 to 2007 were obtained from the railway operators. Poisson regression was used to examine the risk reduction. Two incremental cost-effectiveness ratios (ICER) were calculated to assess the cost-effectiveness based on (1) disability-adjusted life years (DALYs) only and (2) DALYs with potential fare revenue and passengers' waiting time lost due to railway circulation collapse. The PSD installation has effectively reduced railway injuries (adjusted 5-year average percentage change: -68.8%, pfair and appropriate value of the intervention's cost-effectiveness is needed.

Efficient Conversation: The Talk between Pilots and Air Traffic Controllers.

Science.gov (United States)

Simmons, James L.

Two-way radio communications between air traffic controllers using radar on the ground to give airplane pilots instructions are of interest within the developing framework of the sociology of language. The main purpose of air traffic control language is efficient communication to promote flight safety. This study describes the standardized format…

LaGuardia air traffic control tower.

Science.gov (United States)

2011-01-01

To celebrate FAA and its LaGuardia Airport employees past, : present, and future this booklet outlines the airports history and accomplishments and includes copies of some of the photographs in the : air traffic control towers history g...

The Conception Approach to the Traffic Control in Czech Cities - Examples from Prague

Science.gov (United States)

Tichý, Tomáš; Krajčír, Dušan

Modern and economic development of contemporary towns is without question highly dependent upon traffic infrastructure progress. Automobile transport intensity is dramatically rising in large towns and other Czech and European cities. At the same time number of traffic congestions and accidents is increasing, standing times are becoming longer and ecological stress is also escalated. To solve this situation seems to be the most effective solution to design intelligent traffic light intersection control system, variable message signs, preference of public transportation, road line traffic control and next telematics subsystems. This control system and subsystems should improve permeability of traffic road network with a respect for all demands on recent trends of traffic development in towns and regions.

An Adaptive Traffic Signal Control in a Connected Vehicle Environment: A Systematic Review

OpenAIRE

Peng Jing; Hao Huang; Long Chen

2017-01-01

In the last few years, traffic congestion has become a growing concern due to increasing vehicle ownerships in urban areas. Intersections are one of the major bottlenecks that contribute to urban traffic congestion. Traditional traffic signal control systems cannot adjust the timing pattern depending on road traffic demand. This results in excessive delays for road users. Adaptive traffic signal control in a connected vehicle environment has shown a powerful ability to effectively alleviate u...

Occupational Stress and Hypertension among Railway Loco Pilots and Section Controllers

Science.gov (United States)

Jayakumar, Devasigamoney

2017-01-01

Introduction: A cross-sectional study on occupational stress was conducted on loco pilots in 2008, in view of loco pilots being one of the high strain jobs in Indian Railways. Subsequently, a comparative cross-sectional study on occupational stress was conducted among section controllers in 2011, which is another high strain job of Indian Railways. Objective: The studies were conducted to analyze and compare occupational stress and hypertension. Setting and Design: A cross-sectional study on occupational stress and hypertension was conducted among 230 loco pilots in 2008, and subsequently, a comparative cross-sectional study was conducted among 82 section controllers in 2011. Materials and Methods: A closed end 24 item questionnaire on occupational stress was administered. Systolic blood pressure above 140 mmHg and diastolic blood pressure above 90 mmHg were considered as hypertension as per the VII Joint National Committee. Chi-square test and t-test were used for testing significance at P < 0.05. Results: The mean stress score was 8.56 in loco pilots and 7.32 in section controllers. The number of loco pilots with more than 12 stress factors was 49 (21.3%) and the number of section controllers with more than 12 stress factors was 7 (8.5%). The number employees with more than 12 stress factors in different categories of loco pilots were 30 (32%) in the goods category, 12 (12%) in the mail/passenger category, and 7 (19%) in the shunter category, and 3 (11%) in the supervisory category and 4 (7%) in the on-board category of section controllers. The prevalence of hypertension in loco pilots was 36.52% (84) and in the section controllers was 53.66% (44). The prevalence of hypertension in the category with more than 12 stress factors was 30.61% (15) in the loco pilots and 28.57% (2) in the section controllers. The prevalence of hypertension in the both the study groups were higher in the older age, with a family history of hypertension, and with a body mass index of

Occupational Stress and Hypertension among Railway Loco Pilots and Section Controllers.

Science.gov (United States)

Jayakumar, Devasigamoney

2017-01-01

A cross-sectional study on occupational stress was conducted on loco pilots in 2008, in view of loco pilots being one of the high strain jobs in Indian Railways. Subsequently, a comparative cross-sectional study on occupational stress was conducted among section controllers in 2011, which is another high strain job of Indian Railways. The studies were conducted to analyze and compare occupational stress and hypertension. A cross-sectional study on occupational stress and hypertension was conducted among 230 loco pilots in 2008, and subsequently, a comparative cross-sectional study was conducted among 82 section controllers in 2011. A closed end 24 item questionnaire on occupational stress was administered. Systolic blood pressure above 140 mmHg and diastolic blood pressure above 90 mmHg were considered as hypertension as per the VII Joint National Committee. Chi-square test and t -test were used for testing significance at P stress score was 8.56 in loco pilots and 7.32 in section controllers. The number of loco pilots with more than 12 stress factors was 49 (21.3%) and the number of section controllers with more than 12 stress factors was 7 (8.5%). The number employees with more than 12 stress factors in different categories of loco pilots were 30 (32%) in the goods category, 12 (12%) in the mail/passenger category, and 7 (19%) in the shunter category, and 3 (11%) in the supervisory category and 4 (7%) in the on-board category of section controllers. The prevalence of hypertension in loco pilots was 36.52% (84) and in the section controllers was 53.66% (44). The prevalence of hypertension in the category with more than 12 stress factors was 30.61% (15) in the loco pilots and 28.57% (2) in the section controllers. The prevalence of hypertension in the both the study groups were higher in the older age, with a family history of hypertension, and with a body mass index of more than 25 kg/m 2 . The mean occupational stress and employees with more than 12 stress

Traffic theory

National Research Council Canada - National Science Library

Gazis, Denos C

2002-01-01

... of traffic signal settings The vehicle-actuated traffic signal 87 89 77 CHAPTER 3. TRAFFIC CONTROL 101 Objectives of Traffic Control 103 Single, Isolated Intersection 105 Synchronization Scheme...

Application of lap laser welding technology on stainless steel railway vehicles

Science.gov (United States)

Wang, Hongxiao; Wang, Chunsheng; He, Guangzhong; Li, Wei; Liu, Liguo

2016-10-01

Stainless steel railway vehicles with so many advantages, such as lightweight, antirust, low cost of maintenance and simple manufacturing process, so the production of high level stainless steel railway vehicles has become the development strategy of European, American and other developed nations. The current stainless steel railway vehicles body and structure are usually assembled by resistance spot welding process. The weak points of this process are the poor surface quality and bad airtight due to the pressure of electrodes. In this study, the partial penetration lap laser welding process was investigated to resolve the problems, by controlling the laser to stop at the second plate in the appropriate penetration. The lap laser welding joint of stainless steel railway vehicle car body with partial penetration has higher strength and surface quality than those of resistance spot welding joint. The biggest problem of lap laser welding technology is to find the balance of the strength and surface quality with different penetrations. The mechanism of overlap laser welding of stainless steel, mechanical tests, microstructure analysis, the optimization of welding parameters, analysis of fatigue performance, the design of laser welding stainless steel railway vehicles structure and the development of non-destructive testing technology were systematically studied before lap laser welding process to be applied in manufacture of railway vehicles. The results of the experiments and study show that high-quality surface state and higher fatigue strength can be achieved by the partial penetration overlap laser welding of the side panel structure, and the structure strength of the car body can be higher than the requirements of En12663, the standard of structural requirements of railway vehicles bodies. Our company has produced the stainless steel subway and high way railway vehicles by using overlap laser welding technology. The application of lap laser welding will be a big

Multiobjective Reinforcement Learning for Traffic Signal Control Using Vehicular Ad Hoc Network

Directory of Open Access Journals (Sweden)

Houli Duan

2010-01-01

Full Text Available We propose a new multiobjective control algorithm based on reinforcement learning for urban traffic signal control, named multi-RL. A multiagent structure is used to describe the traffic system. A vehicular ad hoc network is used for the data exchange among agents. A reinforcement learning algorithm is applied to predict the overall value of the optimization objective given vehicles' states. The policy which minimizes the cumulative value of the optimization objective is regarded as the optimal one. In order to make the method adaptive to various traffic conditions, we also introduce a multiobjective control scheme in which the optimization objective is selected adaptively to real-time traffic states. The optimization objectives include the vehicle stops, the average waiting time, and the maximum queue length of the next intersection. In addition, we also accommodate a priority control to the buses and the emergency vehicles through our model. The simulation results indicated that our algorithm could perform more efficiently than traditional traffic light control methods.

Disruption Management in Passenger Railway Transportation

DEFF Research Database (Denmark)

Jespersen-Groth, Julie; Potthoff, Daniel; Clausen, Jens

This paper deals with disruption management in passenger railway transportation. In the disruption management process, many actors belonging to different organizations play a role. In this paper we therefore describe the process itself and the roles of the different actors. Furthermore, we discuss...... the three main subproblems in railway disruption management: timetable adjustment, and rolling stock and crew re-scheduling. Next to a general description of these problems, we give an overview of the existing literature and we present some details of the specific situations at DSB S-tog and NS....... These are the railway operators in the suburban area of Copenhagen, Denmark, and on the main railway lines in the Netherlands, respectively. Since not much research has been carried out yet on Operations Research models for disruption management in the railway context, models and techniques that have been developed...

THE BASING OF STABILIZATION PARAMETERS OF A FORTIFIED RAILWAY BED

Directory of Open Access Journals (Sweden)

V. D. Petrenko

2014-12-01

Full Text Available Purpose. The article is devoted to stabilization parameters determination of reinforced railway bed. At the present time, the railway plays the leading role in transport system to ensure the needs of freight and passenger traffic. In modern conditions railway operation concentrates on ensuring the necessary level of track reliability, including the roadbed, this is one of the main elements of road structures. The purpose of this article is the determination of basic parameters of stress-strain state to stabilize the soil subgrade embankment by reinforced materials. Methodology. To achieve this goal the following tasks of researches were solved: the effect of reinforcing layer of geomaterial on deformation properties of soil subgrade in various design of strengthening was investigated, the distributions of stresses in the subgrade were determined, reinforced of geomaterials under state load. Experimental studies to explore the nature of the deformation model subgrade at various degrees of stress were carried out. Findings. The analysis of the results of performed experimental and theoretical studies permitted to do the following conclusions. In conducting researches determined the distribution of stresses in the subgrade reinforced geomaterials under static load. The complex of experimental studies allows exploring the nature of the deformation model subgrade at various degrees of stress. Originality. On the basis of the theoretical studies have been regarded the problem of determining the stress-strain state of subgrade reinforced geomaterials by measuring stresses in its application for step loads. Practical value. The practical value was presented by the results of evaluating the effect of reinforcing way for changing the stress-strain state of subgrade.

Controlling traffic jams by time modulating the safety distance

DEFF Research Database (Denmark)

Gaididei, Yu B.; Gorria, C.; Berkemer, R.

2013-01-01

The possibility of controlling traffic dynamics by applying high-frequency time modulation of traffic flow parameters is studied. It is shown that the region of the car density where the uniform (free) flow is unstable changes in the presence of time modulation compared with the unmodulated case....

Traffic noise and vehicle movement at a controlled intersection

NARCIS (Netherlands)

Salomons, E.M.

2014-01-01

Traffic noise at an intersection controlled by traffic lights shows noise level variations due to the alternating green and red lights for the different trafficstreams. Noise peaks caused by automobiles pulling up or passing by at highspeed may be quite annoying for people living near the

PERSPECTIVES OF UKRAINIAN RAILWAY TOURISM DEVELOPMENT ON NARROW-GAUGE LINES OF ZAKARPATTIA

Directory of Open Access Journals (Sweden)

V. G. Kuznetsov

2015-07-01

and effective functioning of mountain railways with a width of 750 mm in the Carpathian region will give an impetus to the tourism development, engineering, construction and energy. At the same time, these actions will allow us to finally implement a scientifically-based effective flood control measures that will protect the population from natural environmental disasters.

On the Feasibility of High Speed Railway mmWave Channels in Tunnel Scenario

Directory of Open Access Journals (Sweden)

Guangkai Li

2017-01-01

Full Text Available Rail traffic is widely acknowledged as an efficient and green transportation pattern and its evolution attracts a lot of attention. However, the key point of the evolution is how to develop the railway services from traditional handling of the critical signaling applications only to high data rate applications, such as real-time videos for surveillance and entertainments. The promising method is trying to use millimeter wave which includes dozens of GHz bandwidths to bridge the high rate demand and frequency shortage. In this paper, the channel characteristics in an arched railway tunnel are investigated owing to their significance of designing reliable communication systems. Meantime, as millimeter wave suffers from higher propagation loss, directional antenna is widely accepted for designing the communication system. The specific changes that directional antenna brings to the radio channel are studied and compared to the performances of omnidirectional antenna. Note that the study is based on enhanced wide-band ray tracing tool where the electromagnetic and scattering parameters of the main materials of the tunnel are measured and fitted with predicting models.

In-Trail Procedure Air Traffic Control Procedures Validation Simulation Study

Science.gov (United States)

Chartrand, Ryan C.; Hewitt, Katrin P.; Sweeney, Peter B.; Graff, Thomas J.; Jones, Kenneth M.

2012-01-01

In August 2007, Airservices Australia (Airservices) and the United States National Aeronautics and Space Administration (NASA) conducted a validation experiment of the air traffic control (ATC) procedures associated with the Automatic Dependant Surveillance-Broadcast (ADS-B) In-Trail Procedure (ITP). ITP is an Airborne Traffic Situation Awareness (ATSA) application designed for near-term use in procedural airspace in which ADS-B data are used to facilitate climb and descent maneuvers. NASA and Airservices conducted the experiment in Airservices simulator in Melbourne, Australia. Twelve current operational air traffic controllers participated in the experiment, which identified aspects of the ITP that could be improved (mainly in the communication and controller approval process). Results showed that controllers viewed the ITP as valid and acceptable. This paper describes the experiment design and results.

Experimental Stress Analysis at Railway Inspection Pit

Directory of Open Access Journals (Sweden)

Nicuşor Laurentiu Zaharia

2008-10-01

Full Text Available Railway inspection pits are used in railway halls. The purpose of inspection pits is to allow the working under the vehicle. Inspection pits can be found in locomotive depots, factories etc. The new design for a inspection pit in a railway hall involve tests in purpose of homologations the railway infrastructure. Before the homologation committee meeting, tests are made; after the test, a testing report is made which it will be part at homologation documents.

The Use of the Dynamic Solution Space to Assess Air Traffic Controller Workload

NARCIS (Netherlands)

D'Engelbronner, J.G.; Mulder, M.; Van Paassen, M.M.; De Stigter, S.; Huisman, H.

2010-01-01

Air traffic capacity is mainly bound by air traffic controller workload. In order to effectively find solutions for this problem, off-line pre-experimental workload assessment methods are desirable. In order to better understand the workload associated with air traffic control, previous research

A Domain-specific Framework for Automated Construction and Verification of Railway Control Systems

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth

2009-01-01

in a demand for a higher degree of automation for the development verification, validation and test phases of projects, without impairing the thoroughness of safety-related quality measures and certification activities. Motivated by these considerations, this presentation describes an approach for automated...... elaborate safety mechanisms in order to keep the risk at the same low level that has been established for European railways until today. The challenge is further increased by the demand for shorter time-to-market periods and higher competition among suppliers of the railway domain; both factors resulting...

Traffic Flow Visualization and Control

National Research Council Canada - National Science Library

Larson, Robert

1999-01-01

.... Air Force Research Laboratory. It is a video-camera-based, wide-area, traffic surveillance and detection system that provides real-time traffic information to traffic management center operators...

Flight to the future : human factors in air traffic control

Science.gov (United States)

1997-01-01

The nation's air traffic control system is responsible for managing a complex : mixture of air traffic from commercial, general, corporate, and military : aviation. Despite a strong safety record, the system does suffer occasional : serious disruptio...

development of an electronic vehicular traffic signal controller

African Journals Online (AJOL)

INTRODUCTION ... The SCOOT (Split Cycle Offset Optimization Technique) signal control system implements an adaptive ... An electronic traffic signal controller is basically a sequential machine whose operation can be modeled using finite ...

TASAR Flight Trial 2: Assessment of Air Traffic Controller Acceptability of TASAR Requests

Science.gov (United States)

Idris, Husni; Enea, Gabriele

2016-01-01

In support of the Flight Trial (FT-2) of NASA's prototype of the Traffic Aware Strategic Aircrew Requests (TASAR) concept, observations were conducted at the air traffic facilities to identify and assess the main factors that affect the acceptability of pilot requests by air traffic controllers. Two observers shadowed air traffic controllers at the Atlanta (ZTL) and Jacksonville (ZJX) air traffic control centers as the test flight pilot made pre-scripted requests to invoke acceptability issues and then they interviewed the observed and other controllers voluntarily. Fifty controllers were interviewed with experience ranging from one to thirty-five years. All interviewed controllers were enthusiastic about the technology and accounting for sector boundaries in pilot requests, particularly if pilots can be made aware of high workload situations. All interviewed controllers accept more than fifty percent of pilot requests; forty percent of them reject less than ten percent of requests. The most common reason for rejecting requests is conflicting with traffic followed by violating letters of agreement (LOAs) and negatively impacting neighboring sector workload, major arrival and departure flows and flow restrictions. Thirty-six requests were made during the test, eight of which were rejected due to: the aircraft already handed off to another sector, violating LOA, opposing traffic, intruding into an active special use airspace (SUA), intruding into another center, weather, and unfamiliarity with the requested waypoint. Nine requests were accepted with delay mostly because the controller needed to locate unfamiliar waypoints or to coordinate with other controllers.

[Research on China railway health campaign in 1930s].

Science.gov (United States)

Huang, Huaping

2015-01-01

The motivation factors of China's railway health campaign in 1930s included avocation by the government, mass media mobilization, railway authorities' hygiene awareness and the systematization of the construction of organization. During the health campaign, the railway authorities adopted various approaches for its formation, including the rally speeches, distribution of materials, cleaning and vaccination etc. Unfortunately, the actual effect of railway health campaign was not satisfactory, yet, it enhanced theoretically railway employees' health knowledge and contributed to the promotion of modernization of hygienic knowledge. Meanwhile, there still existed many problems in the railway health campaign, for example, lack of funds, formalism and uneven development among the railway bureaus.

High Performance and Energy Efficient Traffic Light Controller Design Using FPGA

DEFF Research Database (Denmark)

Pandey, Sujeet; Shrivastav, Vivek Kumar; Sharma, Rashmi

2017-01-01

and then we have analyzed power consumption for traffic light controller on different FPGA. Leakage power is in range of 97.5-99% of total power consumption by traffic light controller on Virtex-7 FPGA. Signal power, clock power and IOs power are almost negligible. Power dissipation is measured on XPOWER......In this work, Verilog is used as hardware description language for implementation of traffic light controller. It shows Red, Green and Yellow color at a predefined interval. Technology scaling is used as energy efficient technique. We have used 90nm, 65nm, 40nm and 28nm technology based FPGA...

The Effectiveness of Yoga on Spiritual Intelligence in Air Traffic Controllers of Tehran Flight Control Center

Science.gov (United States)

Safara, Maryam; Ghasemi, Pejman

2017-01-01

The aim of this study was to evaluate the efficacy of yoga on spiritual intelligence in air traffic controllers in Tehran flight control center. This was a quasi-experimental research and the study population includes all air traffic controllers in Tehran flight control center. The sample consisted of 40 people of the study population that were…

Automated Air Traffic Control Operations with Weather and Time-Constraints: A First Look at (Simulated) Far-Term Control Room Operations

Science.gov (United States)

Prevot, Thomas; Homola, Jeffrey R.; Martin, Lynne H.; Mercer, Joey S.; Cabrall, Christopher C.

2011-01-01

In this paper we discuss results from a recent high fidelity simulation of air traffic control operations with automated separation assurance in the presence of weather and time-constraints. We report findings from a human-in-the-loop study conducted in the Airspace Operations Laboratory (AOL) at the NASA Ames Research Center. During four afternoons in early 2010, fifteen active and recently retired air traffic controllers and supervisors controlled high levels of traffic in a highly automated environment during three-hour long scenarios, For each scenario, twelve air traffic controllers operated eight sector positions in two air traffic control areas and were supervised by three front line managers, Controllers worked one-hour shifts, were relieved by other controllers, took a 3D-minute break, and worked another one-hour shift. On average, twice today's traffic density was simulated with more than 2200 aircraft per traffic scenario. The scenarios were designed to create peaks and valleys in traffic density, growing and decaying convective weather areas, and expose controllers to heavy and light metering conditions. This design enabled an initial look at a broad spectrum of workload, challenge, boredom, and fatigue in an otherwise uncharted territory of future operations. In this paper we report human/system integration aspects, safety and efficiency results as well as airspace throughput, workload, and operational acceptability. We conclude that, with further refinements. air traffic control operations with ground-based automated separation assurance can be an effective and acceptable means to routinely provide very high traffic throughput in the en route airspace.

Automated mixed traffic vehicle control and scheduling study

Science.gov (United States)

Peng, T. K. C.; Chon, K.

1976-01-01

The operation and the expected performance of a proposed automatic guideway transit system which uses low speed automated mixed traffic vehicles (AMTVs) were analyzed. Vehicle scheduling and headway control policies were evaluated with a transit system simulation model. The effect of mixed traffic interference on the average vehicle speed was examined with a vehicle pedestrian interface model. Control parameters regulating vehicle speed were evaluated for safe stopping and passenger comfort. Some preliminary data on the cost and operation of an experimental AMTV system are included. These data were the result of a separate task conducted at JPL, and were included as background information.

An intelligent vehicular traffic signal control system with state flow chart design and fpga prototyping

International Nuclear Information System (INIS)

Solangi, U.S.; Memon, T.D.; Noonari, A.S.; Ansari, O.A.

2017-01-01

The problem of vehicular traffic congestion is a persistent constraint in the socio-economic development of Pakistan. This paper presents design and implementation of an intelligent traffic controller based on FPGA (Field Programmable Gate Array) to provide an efficient traffic management by optimizing functioning of traffic lights which will result in minimizing traffic congestion at intersections. The existent Traffic Signal system in Pakistan is fixed-time based and offers only Open Loop method for Traffic Control. The Intelligent Traffic Controller presented here uses feedback sensors to read the Traffic density present at a four way intersection to provide an efficient alternative for better supervisory Control of Traffic flow. The traffic density based control logic has been developed in a State Flow Chart for improved visualization of State Machine based operation, and implemented as a Subsystem in Simulink and transferred into VHDL (Hardware Description Language) code using HDL Coder for reducing development time and time to market, which are essential to capitalize Embedded Systems Market. The VHDL code is synthesized with Altera QUARTUS, simulated timing waveform is obtained to verify correctness of the algorithm for different Traffic Scenarios. For implementation purpose estimations were obtained for Cyclone-III and Stratix-III. (author)

An Intelligent Vehicular Traffic Signal Control System with State Flow Chart Design and FPGA Prototyping

Directory of Open Access Journals (Sweden)

UMAIR SAEEDSOLANGI

2017-04-01

Full Text Available The problem of vehicular traffic congestion is a persistent constraint in the socio-economic development of Pakistan. This paper presents design and implementation of an intelligent traffic controller based on FPGA (Field Programmable Gate Array to provide an efficient traffic management by optimizing functioning of traffic lights which will result in minimizing traffic congestion at intersections. The existent Traffic Signal system in Pakistan is fixed-time based and offers only Open Loop method for Traffic Control. The Intelligent Traffic Controller presented here uses feedback sensors to read the Traffic density present at a four way intersection to provide an efficient alternative for better supervisory Control of Traffic flow. The traffic density based control logic has been developed in a State Flow Chart for improved visualization of State Machine based operation, and implemented as a Subsystem in Simulink and transferred into VHDL (Hardware Description Language code using HDL Coder for reducing development time and time to market, which are essential to capitalize Embedded Systems Market. The VHDL code is synthesized with Altera QUARTUS, simulated timing waveform is obtained to verify correctness of the algorithm for different Traffic Scenarios. For implementation purpose estimations were obtained for Cyclone-III and Stratix-III.

Railway safety climate: a study on organizational development.

Science.gov (United States)

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

A sensemaking perspective on framing the mental picture of air traffic controllers.

Science.gov (United States)

Malakis, Stathis; Kontogiannis, Tom

2013-03-01

It has long been recognized that controller strategies are based on a 'mental picture' or representation of traffic situations. Earlier studies indicated that controllers tend to maintain a selective representation of traffic flows based on a few salient traffic features that point out to interesting events (e.g., potential conflicts). A field study is presented in this paper that examines salient features or 'knowledge variables' that constitute the building blocks of controller mental pictures. Verbal reports from participants, a field experiment and observations of real-life scenarios provided insights into the cognitive processes that shape and reframe the mental pictures of controllers. Several cognitive processes (i.e., problem detection, elaboration, reframing and replanning) have been explored within a particular framework of sensemaking stemming from the data/frame theory (Klein et al., 2007). Cognitive maps, representing standard and non-standard air traffic flows, emerged as an explanatory framework for making sense of traffic patterns and for reframing mental pictures. The data/frame theory proved to be a useful theoretical tool for investigating complex cognitive phenomena. The findings of the study have implications for the design of training curricula and decision support systems in air traffic control systems. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Study of Parameters that Determine Railway Line Capacity

Directory of Open Access Journals (Sweden)

Josip Kukec

2005-07-01

Full Text Available In this work the study focuses on:- determining the elements required to determine the locationfor the installation of the main signals,- calculated block lengths, and- calculations of optimal head ways, that have not been studiedin detail although they deserve special attention due totheir impact.Generally speaking, the signals are installed in compliancewith the local circumstances, i. e. according to the technicaland technological characteristics and conditions determinedby the traffic places of work they protect.The distribution and length of the blocks depend on: therailway line and its exploitation characteristics, structure andtype of trains that run on the railway line, traffic organisationand signalisation system, as well as technical and exploitationcharacte1istics of the traction vehicles and the rolling stock.What has to be considered is that the minimum section lengthcannot be shorter than the length of the braking distance, i. e.the length of the longest train which runs on the respective railwayline.The study of these parameters is supplemented by the calculationof the reduction in throughput capacity depending on thelack of uniformity in the operation of trains, which, in order tomaintain the design quality of the transportation se1vice, and inthe activities of establishing and implementing the business policyshouldn't be left out nor bypassed.

Improvement of Ride Quality of Railway Vehicle by Semiactive Secondary Suspension System on Roller Rig Using Magnetorheological Damper

Directory of Open Access Journals (Sweden)

Yu-Jeong Shin

2014-07-01

Full Text Available Ride quality became a very important factor in the performance of railway vehicles according to the expansion of high-speed railways and speedup of velocity of railway vehicles. In this study, the results of applying the MR (magnetorheological lateral damper on the secondary suspension to reduce the vibration of the car body, directly relating to the ride quality of railway vehicles, were mentioned. In order to verify the control performance of MR dampers, a 1/5 scaled railway vehicle model was constructed, and numerical simulation and experimental tests were conducted. The MR damper for the experimental tests was produced and was attached between the car body and bogie of a full scaled vehicle, and a vibration controlling test was performed to improve ride quality on a roller rig. The skyhook control algorithm was used as the controlling technique, and regarding the test results, the RMS (root mean square value was found by compensating the frequency of the lateral vibration based on the UIC 513 R Standard about the ride quality of railway vehicles. As a result of the test, it could be confirmed that vibration was reduced by approximately 24% when attaching the MR damper between the bogie and the car body compared to when applying a passive damper.

Existing Noise Level at Railway Stations in Malaysia

Directory of Open Access Journals (Sweden)

Shahidan Shahiron

2017-01-01

Full Text Available Railway transportation known as one of the most environmental friendly transportation mode. However, the significance problems of railway transportation are noise pollution and negatively impact the wellbeing of the whole community. Unfortunately, there has been lack of public awareness about the noise level produce by the railway transportation in Malaysia. This study investigates the noise level produced by railway transportation in Malaysia specifically by Keretapi Tanah Melayu Berhad (KTMB. Methods of collecting existing noise level at railway stations in Malaysia are briefly discussed in this study. The finding indicates that the noise level produced by the railway transportation in Malaysia which is by KTMB is considered as dangerous to human being and also exceed the noise limit that has been assigned by Department of Environment Ministry of Natural Resources and Environment of Malaysia. A better noise barrier and improved material should be developed to mitigate the existing noise level produced by railway transportations in Malaysia.

20 CFR 202.15 - Railway labor organizations.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Railway labor organizations. 202.15 Section... EMPLOYERS UNDER THE ACT § 202.15 Railway labor organizations. Railway labor organizations, national in scope... bylaws of such organizations, shall be employers within the meaning of the act. (a) An organization doing...

The Combined Effects of Aircraft and Road Traffic Noise and Aircraft and Railway Noise on Noise Annoyance—An Analysis in the Context of the Joint Research Initiative NORAH

Directory of Open Access Journals (Sweden)

Jördis Wothge

2017-08-01

Full Text Available The Noise Related Annoyance Cognition and Health (NORAH research initiative is one of the most extensive studies on the physiological and psychological long-term effects of transportation noise in Europe. It includes research on the quality of life and annoyance as well as cardiovascular effects, sleep disturbance, breast cancer, blood pressure, depression and the cognitive development of children. Within the realm of the annoyance module of the study approximately 10,000 residents of the Rhine-Main district were surveyed on the combined effects of transportation noise. This included combined noise from aircraft and road traffic noise (N = 4905, or aircraft and railway noise (N = 4777. Results show that judgment of the total noise annoyance of participants was strongly determined by the sound source which was judged as more annoying (in this case aircraft noise. To a lesser extent, the average sound pressure level of the two present sources was also of relevance.

Theoretical Aspects of Erroneous Actions During the Process of Decision Making by Air Traffic Control

Directory of Open Access Journals (Sweden)

Andersone Silva

2017-08-01

Full Text Available The Theoretical Aspects of Erroneous Actions During the Process of Decision Making by Air Traffic Control evaluates the factors affecting the operational decision-making of a human air traffic controller, interacting in a dynamic environment with the flight crew, surrounding aircraft traffic and environmental conditions of the airspace. This article reviews the challenges of air traffic control in different conditions, ranging from normal and complex to emergency and catastrophic. Workload factors and operating conditions make an impact on air traffic controllers’ decision-making. The proposed model compares various operating conditions within an assumed air traffic control environment subsequently comparing them against a theoretically “perfect” air traffic control system. A mathematical model of flight safety assessment has been proposed for the quantitative assessment of various hazards arising during the process of Air Traffic Control. The model assumes events of various severity and probability ranging from high frequency and low severity up to less likely and catastrophic ones. Certain limitations of the model have been recognised and further improvements for effective hazard evaluation have been suggested.

Control de tráfico vehicular usando ANFIS Vehicular traffic control using ANFIS

Directory of Open Access Journals (Sweden)

Luis Fernando Pedraza

2012-04-01

Full Text Available Diferentes estrategias para el control del tráfico urbano se han presentado a lo largo del tiempo. Este artículo presenta el diseño de un modelo de tráfico vehicular, el cual examina el tráfico existente en una vía a través de una serie de semáforos. A partir de este modelo se sincronizan los tiempos de duración y de desfase de los semáforos, utilizando para ello el Sistema de Inferencia Difusa Basado en Redes Adaptativas (ANFIS. El modelo es simulado y los resultados se evalúan a nivel macroscópico con el modelo de tiempos fijos, que funciona actualmente en Bogotá-Colombia.Different strategies for urban traffic control have been presented over time. This paper presents the design of a vehicular traffic model, examining the existing traffic through a serie of traffic lights on a road. From this model the times of duration and phase of the traffic lights are synchronized, using the Adaptive Network Based Fuzzy Inference Systems (ANFIS. The model is simulated and the results are evaluated at macroscopic level with the fixed time model, currently operating in Bogota-Colombia.

RESEARCH OF ENGINEERING TRAFFIC IN COMPUTER UZ NETWORK USING MPLS TE TECHNOLOGY

Directory of Open Access Journals (Sweden)

V. M. Pakhomovа

2014-12-01

Full Text Available Purpose. In railway transport of Ukraine one requires the use of computer networks of different technologies: Ethernet, Token Bus, Token Ring, FDDI and others. In combined computer networks on the railway transport it is necessary to use packet switching technology in multiprotocol networks MPLS (MultiProtocol Label Switching more effectively. They are based on the use of tags. Packet network must transmit different types of traffic with a given quality of service. The purpose of the research is development a methodology for determining the sequence of destination flows for the considered fragment of computer network of UZ. Methodology. When optimizing traffic management in MPLS networks has the important role of technology traffic engineering (Traffic Engineering, TE. The main mechanism of TE in MPLS is the use of unidirectional tunnels (MPLS TE tunnel to specify the path of the specified traffic. The mathematical model of the problem of traffic engineering in computer network of UZ technology MPLS TE was made. Computer UZ network is represented with the directed graph, their vertices are routers of computer network, and each arc simulates communication between nodes. As an optimization criterion serves the minimum value of the maximum utilization of the TE-tunnel. Findings. The six options destination flows were determined; rational sequence of flows was found, at which the maximum utilization of TE-tunnels considered a simplified fragment of a computer UZ network does not exceed 0.5. Originality. The method of solving the problem of traffic engineering in Multiprotocol network UZ technology MPLS TE was proposed; for different classes its own way is laid, depending on the bandwidth and channel loading. Practical value. Ability to determine the values of the maximum coefficient of use of TE-tunnels in computer UZ networks based on developed software model «TraffEng». The input parameters of the model: number of routers, channel capacity, the

ASN.1 notation for exchange of data in computer-based railway control systems

Directory of Open Access Journals (Sweden)

Zbigniew ŁUKASIK

2009-01-01

Full Text Available Development of railway control systems aims at computerization. In most cases these systems are Distributed Real Time Systems. However, a huge problem in their putting into practice is the lack of interface standardization in the range of data structures and information exchange methods. It results in a variety of solutions, and thus in problems concerning cooperation of systems that come from different software vendors. Specification of protocols for data exchanging applications should therefore be created with the use of generally accepted standards. One of them is ASN.1 (Abstract Syntax Notation One language, which shall be presented in this article.

Pilot visual acquisition of traffic : operational communications from air traffic control operational communication.

Science.gov (United States)

2001-05-01

Avionics devices designed to provide pilots with graphically displayed traffic information will enable pilots to acquire and verify the identity of any intruder aircraft within the general area, either before or in accordance with a controller-issued...

Detection of Botnet Command and Control Traffic by the Multistage Trust Evaluation of Destination Identifiers

Directory of Open Access Journals (Sweden)

Pieter Burghouwt

2015-10-01

Full Text Available Network-based detection of botnet Command and Control communication is a difficult task if the traffic has a relatively low volume and if popular protocols, such as HTTP, are used to resemble normal traffic. We present a new network-based detection approach that is capable of detecting this type of Command and Control traffic in an enterprise network by estimating the trustworthiness of the traffic destinations. If the destination identifier of a traffic flow origins directly from: human input, prior traffic from a trusted destination, or a defined set of legitimate applications, the destination is trusted and its associated traffic is classified as normal. Advantages of this approach are: the ability of zero day malicious traffic detection, low exposure to malware by passive host-external traffic monitoring, and the applicability for real-time filtering. Experimental evaluation demonstrates successful detection of diverse types of Command and Control Traffic.

RESTRUCTURING INDONESIAN RAILWAY – INTEGRATION OR SEPARATION

Directory of Open Access Journals (Sweden)

Utut Widyanto

2013-05-01

The study found that the separation model is still the best approach for restructuring Indonesian railway but if looking at the Indonesian railway current condition with its problem of backlog assets it would be better that the separation approach is used in the development of railway in other islands. Keywords: Restructuration, separation, funds, operator.

How to reduce workload--augmented reality to ease the work of air traffic controllers.

Science.gov (United States)

Hofmann, Thomas; König, Christina; Bruder, Ralph; Bergner, Jörg

2012-01-01

In the future the air traffic will rise--the workload of the controllers will do the same. In the BMWi research project, one of the tasks is, how to ensure safe air traffic, and a reasonable workload for the air traffic controllers. In this project it was the goal to find ways how to reduce the workload (and stress) for the controllers to allow safe air traffic, esp. at huge hub-airports by implementing augmented reality visualization and interaction.

The Auto control System Based on InTouch Configuration software for High-gravity Oil Railway Tank Feeding

Directory of Open Access Journals (Sweden)

Xu De-Kai

2015-01-01

Full Text Available This paper provides automatic design for high-gravity oil railway tank feeding system of some refinery uses distributive control system. The system adopts the automatic system of Modicon TSX Quantum or PLC as monitor and control level and uses a PC-based plat form as principal computer running on the Microsoft Windows2000. An automatic control system is developed in the environment of InTouch configuration software. This system implements automatic high-gravity oil tank feeding with pump controlling function. And it combines automatic oil feeding controlling, pump controlling and tank monitoring function to implement the automation of oil feeding with rations and automatic control.

Traffic Congestion Evaluation and Signal Control Optimization Based on Wireless Sensor Networks: Model and Algorithms

Directory of Open Access Journals (Sweden)

Wei Zhang

2012-01-01

Full Text Available This paper presents the model and algorithms for traffic flow data monitoring and optimal traffic light control based on wireless sensor networks. Given the scenario that sensor nodes are sparsely deployed along the segments between signalized intersections, an analytical model is built using continuum traffic equation and develops the method to estimate traffic parameter with the scattered sensor data. Based on the traffic data and principle of traffic congestion formation, we introduce the congestion factor which can be used to evaluate the real-time traffic congestion status along the segment and to predict the subcritical state of traffic jams. The result is expected to support the timing phase optimization of traffic light control for the purpose of avoiding traffic congestion before its formation. We simulate the traffic monitoring based on the Mobile Century dataset and analyze the performance of traffic light control on VISSIM platform when congestion factor is introduced into the signal timing optimization model. The simulation result shows that this method can improve the spatial-temporal resolution of traffic data monitoring and evaluate traffic congestion status with high precision. It is helpful to remarkably alleviate urban traffic congestion and decrease the average traffic delays and maximum queue length.

Capacity gain with an alternative LTE railway communication network

DEFF Research Database (Denmark)

Sniady, Aleksander; Soler, José

2014-01-01

, such as 3GPP Long Term Evolution (LTE). T his paper describe s how to adapt the reversible multi - chain/channel queuing system to model an LTE cell serving ETCS - equipped trains . It is proposed to use the multiple user chains available in the model to represent varying bitrate in LTE radio access network....... Usin g this model , LTE and GSM - R are compare d in terms of capacity on an example at Copenhagen Main Train Station . The purpose of this work is to demonstrate the benefits that railway operators and infrastructure managers can expect from the introduc tion of LTE , as a telecommunication technology...... Control System (ETCS) signaling , the capacity of GSM - R turns out to be insufficient . GSM - R cannot ful fill the railway requirements , in terms of the number of simultaneous ETCS connections . This is why , alternative , more efficient communication technologies should be considered by railways...

Assessing The Impact Of Railway Restructuring In Nigeria | Ibe ...

African Journals Online (AJOL)

The study presents railway restructuring as a solution option to railway problems in Nigeria. It aims at ascertaining the efficiency of the critical input factors of Nigerian Railway corporation (NRC) while comparing it with that of the restructured developed and best practices railways to establish the basis for restructuring.

Dynamic control of traffic lights

NARCIS (Netherlands)

Haijema, Rene; Hendrix, Eligius M.T.; Wal, van der Jan

2017-01-01

Traffic lights are put in place to dynamically change priority between traffic participants. Commonly, the duration of green intervals and the grouping, and ordering in which traffic flows are served are pre-fixed. In this chapter, the problem of minimizing vehicle delay at isolated intersections is

ROLE OF PEDAGOGY COMPETENCE OF A CONTROLLER-TRAINER IN SIMU-TRAINING OF AIR TRAFFIC CONTROLLERS

Directory of Open Access Journals (Sweden)

О. Петращук

2012-04-01

Full Text Available The article focuses on the issue of pedagogy competence of an ATCO-trainer as a constituent of hisoverall professional competency/capacity to provide quality SIMU- training of the air traffic controllers. Thecurrent University curriculum for abinitio controllers does not provide developing of the pedagogicalcompetence. But it is requested very much when an air traffic controller is employed as a controller-trainerfor SIMU-training. It is suggested to include pedagogical science as a course in the University programme

Interdisciplinary safety analysis of complex socio-technological systems based on the functional resonance accident model: An application to railway trafficsupervision

International Nuclear Information System (INIS)

Belmonte, Fabien; Schoen, Walter; Heurley, Laurent; Capel, Robert

2011-01-01

This paper presents an application of functional resonance accident models (FRAM) for the safety analysis of complex socio-technological systems, i.e. systems which include not only technological, but also human and organizational components. The supervision of certain industrial domains provides a good example of such systems, because although more and more actions for piloting installations are now automatized, there always remains a decision level (at least in the management of degraded modes) involving human behavior and organizations. The field of application of the study presented here is railway traffic supervision, using modern automatic train supervision (ATS) systems. Examples taken from railway traffic supervision illustrate the principal advantage of FRAM in comparison to classical safety analysis models, i.e. their ability to take into account technical as well as human and organizational aspects within a single model, thus allowing a true multidisciplinary cooperation between specialists from the different domains involved. A FRAM analysis is used to interpret experimental results obtained from a real ATS system linked to a railway simulator that places operators (experimental subjects) in simulated situations involving incidents. The first results show a significant dispersion in performances among different operators when detecting incidents. Some subsequent work in progress aims to make these 'performance conditions' more homogeneous, mainly by ergonomic modifications. It is clear that the current human-machine interface (HMI) in ATS systems (a legacy of past technologies that used LED displays) has reached its limits and needs to be improved, for example, by highlighting the most pertinent information for a given situation (and, conversely, by removing irrelevant information likely to distract operators).

Interdisciplinary safety analysis of complex socio-technological systems based on the functional resonance accident model: An application to railway trafficsupervision

Energy Technology Data Exchange (ETDEWEB)

Belmonte, Fabien, E-mail: fabien.belmonte@transport.alstom.co [Alstom Transport, 48 rue Albert Dhalenne, 93482 Saint-Ouen cedex (France); Schoen, Walter [Universite de Technologie de Compiegne, Laboratoire Heudiasyc, Centre de Recherches de Royallieu, BP20529, 60205 Compiegne cedex (France); Heurley, Laurent [Universite de Picardie Jules Verne, Equipe Cognition, Langage, Emotion et Acquisition (CLEA), EA 4296, UFR de Philosophie, Sciences Humaines et Sociales, Chemin du Thil, 80025 Amiens, Cedex 1 (France); Capel, Robert [Alstom Transport, 48 rue Albert Dhalenne, 93482 Saint-Ouen cedex (France)

2011-02-15

This paper presents an application of functional resonance accident models (FRAM) for the safety analysis of complex socio-technological systems, i.e. systems which include not only technological, but also human and organizational components. The supervision of certain industrial domains provides a good example of such systems, because although more and more actions for piloting installations are now automatized, there always remains a decision level (at least in the management of degraded modes) involving human behavior and organizations. The field of application of the study presented here is railway traffic supervision, using modern automatic train supervision (ATS) systems. Examples taken from railway traffic supervision illustrate the principal advantage of FRAM in comparison to classical safety analysis models, i.e. their ability to take into account technical as well as human and organizational aspects within a single model, thus allowing a true multidisciplinary cooperation between specialists from the different domains involved. A FRAM analysis is used to interpret experimental results obtained from a real ATS system linked to a railway simulator that places operators (experimental subjects) in simulated situations involving incidents. The first results show a significant dispersion in performances among different operators when detecting incidents. Some subsequent work in progress aims to make these 'performance conditions' more homogeneous, mainly by ergonomic modifications. It is clear that the current human-machine interface (HMI) in ATS systems (a legacy of past technologies that used LED displays) has reached its limits and needs to be improved, for example, by highlighting the most pertinent information for a given situation (and, conversely, by removing irrelevant information likely to distract operators).

Operating a railway system within a challenging environment: Economic history and experiences of Zimbabwe’s national railways

OpenAIRE

Charles Mbohwa

2008-01-01

This paper presents a historical background to the development of the railways in Zimbabwe and then discusses their current state. Besides being a landlocked country in Southern Africa, Zimbabwe has since 2000 been saddled with socio-economic and political challenges which have seen a decline in all economic indices, hence posing some challenges to its railways. This article discusses the challenges faced by the railways as a result of high inflation, unstable currency exchange rate, brain dr...

Railway power supply - free of crises and independent

International Nuclear Information System (INIS)

Weigert, E.

1981-01-01

The German Federal Railway realizes 84% of its transport performance by electric traction. The prevailing primary energy source of the railway electric power supply is coal, but the DB uses also furnace gas, nuclear energy and hydroelectric power. The shave of mineral oil lies by about 5%. The public utilities deliver about 15%. The dispersed situation of the power stations and converter stations over the whole supply area offers the advantage of short transport distances. Therefore the 110-kV-railway mains especially meets distribution demands. Very useful is the compound operation with the Austrian Federal Railways and the Swiss Federal Railways. (orig.) [de

Numerical Modelling of the Dynamic Response of High-Speed Railway Bridges Considering Vehicle-Structure and Structure-Soil-Structure Interaction

DEFF Research Database (Denmark)

Bucinskas, Paulius; Agapii, L.; Sneideris, J.

2015-01-01

is idealized as a multi-degree-of-freedom system, modelled with two layers of spring-dashpot suspension systems. Coupling the vehicle system and railway track is realized through interaction forces between the wheels and the rail, where the irregularities of the track are implemented as a random stationary......The aim of this paper is the dynamic analysis of a multi-support bridge structure exposed to high-speed railway traffic. The proposed computational model has a unified approach for simultaneously accounting for the bridge structure response, soil response and forces induced by the vehicle....... The bridge structure is modelled in three dimensions based on the finite element method using two-noded three-dimensional beam elements. The track structure is composed of three layers: rail, sleepers and deck which are connected through spring-dashpot systems. The vehicle travelling along a bridge...

Railway traffic noise pollution. Source, propagation and abatement systems; L'inquinamento acustico prodotto da traffico ferroviario. Origine, propagazione e sistemi di attenuazione. Progetto Apparati silenti

Energy Technology Data Exchange (ETDEWEB)

Lanchi, M.; Salernitano, E. [ENEA, Div. Nuovi Materiali, Centro Ricerche Casaccia, Rome (Italy)

2001-07-01

Noise pollution is one of the hardest environmental problems connected with railway transport system nowadays. The recent grow of the railways network has caused an increased attention to the acoustic levels along the rail tracks, especially in residential areas. This review aims to supply a synthesis of the issues related to railway noise pollution, including economical, social and medical aspects. Italian legislation about environmental noise and its effect on population is based on the law n. 447/1995 and establishes the fundamental principles on both outdoor and indoor environmental protection from acoustic pollution. Many norms followed this statutory law, trying to cover all areas of the noise related problems. A possible solution to the railway traffic noise mitigation should be based on the reduction of the noise produced by trains (active action on the noise sources) and on the use of acoustic barriers beside the track (passive systems). This work describes noise generation and propagation mechanisms as well as sound attenuation with natural and artificial obstacles. Many screening configurations are described and different materials are compared on the basis of technical (experimental measurements and analytical results), economical and feasibility considerations. [Italian] Il problema della rumorosita' connessa all'esercizio di veicoli ferroviari e' diventato di notevole importanza da quando, col diffondersi dei trasporti di mssa ad alta velocita', e' aumentata la sensibilita' della collettivita' al mantenimento di bassi livelli di inquinamento acustico, soprattutto in zone abitative e residenziali. Il presente lavoro si propone di fornire un quadro sintetico, ma esaustivo, delle problematiche connesse al rumore ferroviario, dalle implicazioni sociali, agli aspetti piu' prettamente tecnici. Viene innanzitutto affrontato il tema della normativa nel campo del fonoinquinamento prodotto da rotabili, con riferimento

Traffic Control Device Evaluation Program : FY 2017

Science.gov (United States)

2018-03-01

This report presents findings on the activities conducted in the Traffic Control Device Evaluation Program during the 2017 fiscal year. The research on sponsored changeable message signs (continued from the previous year) was terminated by the Federa...

Intelligent Control in Automation Based on Wireless Traffic Analysis

Energy Technology Data Exchange (ETDEWEB)

Kurt Derr; Milos Manic

2007-08-01

Wireless technology is a central component of many factory automation infrastructures in both the commercial and government sectors, providing connectivity among various components in industrial realms (distributed sensors, machines, mobile process controllers). However wireless technologies provide more threats to computer security than wired environments. The advantageous features of Bluetooth technology resulted in Bluetooth units shipments climbing to five million per week at the end of 2005 [1, 2]. This is why the real-time interpretation and understanding of Bluetooth traffic behavior is critical in both maintaining the integrity of computer systems and increasing the efficient use of this technology in control type applications. Although neuro-fuzzy approaches have been applied to wireless 802.11 behavior analysis in the past, a significantly different Bluetooth protocol framework has not been extensively explored using this technology. This paper presents a new neurofuzzy traffic analysis algorithm of this still new territory of Bluetooth traffic. Further enhancements of this algorithm are presented along with the comparison against the traditional, numerical approach. Through test examples, interesting Bluetooth traffic behavior characteristics were captured, and the comparative elegance of this computationally inexpensive approach was demonstrated. This analysis can be used to provide directions for future development and use of this prevailing technology in various control type applications, as well as making the use of it more secure.

Intelligent Control in Automation Based on Wireless Traffic Analysis

Energy Technology Data Exchange (ETDEWEB)

Kurt Derr; Milos Manic

2007-09-01

Wireless technology is a central component of many factory automation infrastructures in both the commercial and government sectors, providing connectivity among various components in industrial realms (distributed sensors, machines, mobile process controllers). However wireless technologies provide more threats to computer security than wired environments. The advantageous features of Bluetooth technology resulted in Bluetooth units shipments climbing to five million per week at the end of 2005 [1, 2]. This is why the real-time interpretation and understanding of Bluetooth traffic behavior is critical in both maintaining the integrity of computer systems and increasing the efficient use of this technology in control type applications. Although neuro-fuzzy approaches have been applied to wireless 802.11 behavior analysis in the past, a significantly different Bluetooth protocol framework has not been extensively explored using this technology. This paper presents a new neurofuzzy traffic analysis algorithm of this still new territory of Bluetooth traffic. Further enhancements of this algorithm are presented along with the comparison against the traditional, numerical approach. Through test examples, interesting Bluetooth traffic behavior characteristics were captured, and the comparative elegance of this computationally inexpensive approach was demonstrated. This analysis can be used to provide directions for future development and use of this prevailing technology in various control type applications, as well as making the use of it more secure.

Using spatial context to support prospective memory in simulated air traffic control.

Science.gov (United States)

Loft, Shayne; Finnerty, Dannielle; Remington, Roger W

2011-12-01

The aim was to examine whether prospective memory error and response costs to ongoing tasks in an air traffic control simulation could be reduced by providing spatial context. Prospective memory refers to remembering to perform an intended action at an appropriate point in the future. Failures of prospective memory can occur in air traffic control. For this study, three conditions of participants performed an air traffic control task that required them to accept and hand off aircraft and to prevent conflicts. The prospective memory task required participants to remember to press an alternative key rather than the routine key when accepting target aircraft. A red line separated the display into upper and lower regions. Participants in the context condition were told that the prospective memory instruction would apply only to aircraft approaching from one region (upper or lower). Those in the standard condition were not provided this information. In the control condition, participants did not have to perform the prospective memory task. In the context condition, participants made fewer prospective memory errors than did those in the standard condition and made faster acceptance decisions for aircraft approaching from irrelevant compared with relevant regions. Costs to hand-off decision time were also reduced in the context condition. Spatial context provided no benefit to conflict detection. Participants could partially localize their allocation of attentional resources to the prospective memory task to relevant display regions. The findings are potentially applicable to air traffic control, whereby regularities in airspace structure and standard traffic flows allow controllers to anticipate the location of specific air traffic events.

Parameters of passenger facilities according to railway station characteristics

Directory of Open Access Journals (Sweden)

Ondřej HAVLENA

2014-12-01

Full Text Available The article presents ways and goals of categorization of railway stations and stops in the Czech railway network. The aim of this categorization is to classify railway stations (or stops in the railway network according to a suite of entrance parameters (e.g. municipality population, transfer links, job opportunities, tourist attractiveness. On the basis of these parameters, railway stations and stops will be classified into several categories, which will be used to specify the conclusions for station equipment concerning ticket offices, commercial services, waiting rooms and other accessories. Research results can be used as a support for infrastructure managers and railway operators to optimise the scale of their services.

Taking Over Control From Highly Automated Vehicles in Complex Traffic Situations: The Role of Traffic Density.

Science.gov (United States)

Gold, Christian; Körber, Moritz; Lechner, David; Bengler, Klaus

2016-06-01

The aim of this study was to quantify the impact of traffic density and verbal tasks on takeover performance in highly automated driving. In highly automated vehicles, the driver has to occasionally take over vehicle control when approaching system limits. To ensure safety, the ability of the driver to regain control of the driving task under various driving situations and different driver states needs to be quantified. Seventy-two participants experienced takeover situations requiring an evasive maneuver on a three-lane highway with varying traffic density (zero, 10, and 20 vehicles per kilometer). In a between-subjects design, half of the participants were engaged in a verbal 20-Questions Task, representing speaking on the phone while driving in a highly automated vehicle. The presence of traffic in takeover situations led to longer takeover times and worse takeover quality in the form of shorter time to collision and more collisions. The 20-Questions Task did not influence takeover time but seemed to have minor effects on the takeover quality. For the design and evaluation of human-machine interaction in takeover situations of highly automated vehicles, the traffic state seems to play a major role, compared to the driver state, manipulated by the 20-Questions Task. The present results can be used by developers of highly automated systems to appropriately design human-machine interfaces and to assess the driver's time budget for regaining control. © 2016, Human Factors and Ergonomics Society.

Traffic Accident Propagation Properties and Control Measures for Urban Links Based on Cellular Automata

Directory of Open Access Journals (Sweden)

Xian-sheng Li

2013-01-01

Full Text Available With the rapid development of urban transport and the sharp increase in vehicle population, traffic accidents form one of the most important causes of urban traffic congestion other than the imbalance between traffic supply and demand. Traffic congestion causes severe problems, such as environment contamination and energy dissipation. Therefore, it would be useful to analyze the congestion propagation characteristics after traffic accidents. Numerical analysis and computer simulation were two of the typical methods used at present to study the traffic congestion propagation properties. The latter was more widespread as it is more consistent with the actual traffic flow and more visual than the former. In this paper, an improved cellular automata (CA model was presented to analyze traffic congestion propagation properties and to evaluate control strategies. In order to apply them to urban traffic flow simulation, the CA models have been improved and expanded on. Computer simulations were built for congestion not only extending to the upstream intersection, but also the upstream intersection and the entire road network, respectively. Congestion propagation characteristics after road traffic accidents were obtained, and controls of different severities and durations were analyzed. The results provide the theoretical foundation and practical means for the control of congestion.

Lane Changing Control to Reduce Traffic Load Effect on Long-Span Bridges

OpenAIRE

Caprani, Colin C; Enright, Bernard; Carey, Colm

2012-01-01

Long span bridges are critical parts of a nation’s infrastructure network and congested traffic loading is the governing form of traffic loading. Groups of trucks travelling in conveys are created when fast-er moving vehicles, such as cars, change lane. In this research the authors investigate how the control of these lane-changing events can help reduce the traffic load effects on long span bridges. Real traffic data is used to simulate a traffic stream on a virtual road and bridge using a m...

Automated Conflict Resolution For Air Traffic Control

Science.gov (United States)

Erzberger, Heinz

2005-01-01

The ability to detect and resolve conflicts automatically is considered to be an essential requirement for the next generation air traffic control system. While systems for automated conflict detection have been used operationally by controllers for more than 20 years, automated resolution systems have so far not reached the level of maturity required for operational deployment. Analytical models and algorithms for automated resolution have been traffic conditions to demonstrate that they can handle the complete spectrum of conflict situations encountered in actual operations. The resolution algorithm described in this paper was formulated to meet the performance requirements of the Automated Airspace Concept (AAC). The AAC, which was described in a recent paper [1], is a candidate for the next generation air traffic control system. The AAC's performance objectives are to increase safety and airspace capacity and to accommodate user preferences in flight operations to the greatest extent possible. In the AAC, resolution trajectories are generated by an automation system on the ground and sent to the aircraft autonomously via data link .The algorithm generating the trajectories must take into account the performance characteristics of the aircraft, the route structure of the airway system, and be capable of resolving all types of conflicts for properly equipped aircraft without requiring supervision and approval by a controller. Furthermore, the resolution trajectories should be compatible with the clearances, vectors and flight plan amendments that controllers customarily issue to pilots in resolving conflicts. The algorithm described herein, although formulated specifically to meet the needs of the AAC, provides a generic engine for resolving conflicts. Thus, it can be incorporated into any operational concept that requires a method for automated resolution, including concepts for autonomous air to air resolution.

Simulating and evaluating an adaptive and integrated traffic lights control system for smart city application

Science.gov (United States)

Djuana, E.; Rahardjo, K.; Gozali, F.; Tan, S.; Rambung, R.; Adrian, D.

2018-01-01

A city could be categorized as a smart city when the information technology has been developed to the point that the administration could sense, understand, and control every resource to serve its people and sustain the development of the city. One of the smart city aspects is transportation and traffic management. This paper presents a research project to design an adaptive traffic lights control system as a part of the smart system for optimizing road utilization and reducing congestion. Research problems presented include: (1) Congestion in one direction toward an intersection due to dynamic traffic condition from time to time during the day, while the timing cycles in traffic lights system are mostly static; (2) No timing synchronization among traffic lights in adjacent intersections that is causing unsteady flows; (3) Difficulties in traffic condition monitoring on the intersection and the lack of facility for remotely controlling traffic lights. In this research, a simulator has been built to model the adaptivity and integration among different traffic lights controllers in adjacent intersections, and a case study consisting of three sets of intersections along Jalan K. H. Hasyim Ashari has been simulated. It can be concluded that timing slots synchronization among traffic lights is crucial for maintaining a steady traffic flow.

ISSUES OF ORGANIZING THE PASSENGER TRANSPORTATION ON US RAILWAYS

Directory of Open Access Journals (Sweden)

R. H. Korobiova

2017-04-01

Full Text Available Purpose. The paper focuses on a study of the US railway transport organization management during passenger transportation. Methodology. Studies were carried out on the basis of the analysis of literature sources and reporting data on passenger transportation in the USA. Findings. Negative trends in the work of the passenger complex of the Ukrainian railways are the slowdown in the volumes of transportation, the progressive aging of the rolling stock and the overall activity running at a loss for Ukrzaliznytsia. In this regard, the actual task for domestic rail transport is the implementation of industry reforms. Therefore, the paper presented the study of the experience of organizing the passenger transportation on US railways, whose peculiarity is the extremely high degree of competition between modes of transport. As a result of the conducted analysis for working conditions of the US and Ukrainian railways, the general conditions for the functioning of the railways in both countries connected with passenger transportation securing have been established. It was found that general condition for execution of railway passenger transportation for the United States and Ukraine is the subsidization of this activity and combined use of infrastructure for the freight and passengers’ transportations. In this connection, when developing approaches to reforming the passenger economy of Ukraine's railways, it is advisable to use the experience of the United States in assessing the social effectiveness of rail transport, the impact of passenger transportation on the conditions of freight trains handling, and combined use of railway infrastructure by freight and passenger companies. Originality. The author determined the general trends in the development of passenger railway transportation in the US and Ukraine. Practical value. The resulted methods of organizing the operation of the US railway passenger transportation complex can be adapted to solve

The keys to Europe : regulating railways

NARCIS (Netherlands)

2012-01-01

The expansion of the railways in Europe in the middle of the nineteenth century quickly raised new questions about harmonizing standards to allow them to travel over national borders. Negotiations regarding how to run international railways involved entrepreneurs, engineers, and politicians from

Air Traffic Controller Acceptability of Unmanned Aircraft System Detect-and-Avoid Thresholds

Science.gov (United States)

Mueller, Eric R.; Isaacson, Douglas R.; Stevens, Derek

2016-01-01

A human-in-the-loop experiment was conducted with 15 retired air traffic controllers to investigate two research questions: (a) what procedures are appropriate for the use of unmanned aircraft system (UAS) detect-and-avoid systems, and (b) how long in advance of a predicted close encounter should pilots request or execute a separation maneuver. The controller participants managed a busy Oakland air route traffic control sector with mixed commercial/general aviation and manned/UAS traffic, providing separation services, miles-in-trail restrictions and issuing traffic advisories. Controllers filled out post-scenario and post-simulation questionnaires, and metrics were collected on the acceptability of procedural options and temporal thresholds. The states of aircraft were also recorded when controllers issued traffic advisories. Subjective feedback indicated a strong preference for pilots to request maneuvers to remain well clear from intruder aircraft rather than deviate from their IFR clearance. Controllers also reported that maneuvering at 120 seconds until closest point of approach (CPA) was too early; maneuvers executed with less than 90 seconds until CPA were more acceptable. The magnitudes of the requested maneuvers were frequently judged to be too large, indicating a possible discrepancy between the quantitative UAS well clear standard and the one employed subjectively by manned pilots. The ranges between pairs of aircraft and the times to CPA at which traffic advisories were issued were used to construct empirical probability distributions of those metrics. Given these distributions, we propose that UAS pilots wait until an intruder aircraft is approximately 80 seconds to CPA or 6 nmi away before requesting a maneuver, and maneuver immediately if the intruder is within 60 seconds and 4 nmi. These thresholds should make the use of UAS detect and avoid systems compatible with current airspace procedures and controller expectations.

Control techniques for an automated mixed traffic vehicle

Science.gov (United States)

Meisenholder, G. W.; Johnston, A. R.

1977-01-01

The paper describes an automated mixed traffic vehicle (AMTV), a driverless low-speed tram designed to operate in mixed pedestrian and vehicular traffic. The vehicle is a six-passenger electric tram equipped with sensing and control which permit it to function on existing streets in an automatic mode. The design includes established wire-following techniques for steering and near-IR headway sensors. A 7-mph cruise speed is reduced to 2 mph or a complete stop in response to sensor (or passenger) inputs. The AMTV performance is evaluated by operation on a loop route and by simulation. Some necessary improvements involving sensors, sensor pattern, use of an audible signal, and control lag are discussed. It is suggested that appropriate modifications will eliminate collision incidents.

Seismic Retrofitting of an Existing Steel Railway Bridge by Fluid Viscous Dampers

Science.gov (United States)

Gangopadhyay, Avijit; Ghosh, Aparna Dey

2016-09-01

There are over a lakh of bridges in the Indian Railways, many of which have become seismically deficient, either through aging or due to inadequate seismic design considerations. The extensive damage of bridges all over the world in recent earthquakes has propelled significant advancement in earthquake protection and retrofitting of bridges. Amongst various passive control systems that are reliable as well as cost-effective, Fluid Viscous Dampers (FVDs) are proving to be successful in bridge vibration control. Orificed FVDs, commercially available as Taylor Devices, have already been successfully installed in several bridges worldwide. However, there has been no such application or study related to Indian railway bridges. In this paper, an existing thirty years' old railway bridge in Jharkhand, India, has been analyzed in SAP2000v14 considering reduced stiffness and found deficient when subjected to spectrum-compatible accelerograms. Subsequent retrofitting of the bridge superstructure with FVDs has been carried out and the results indicate substantial reductions in the responses of the bridge deck.

Dynamic response of railway tracks in tunnel

OpenAIRE

Hoang , T; Duhamel , Denis; Forêt , Gilles; Yin , H.P.; Joyez , P; Caby , R

2014-01-01

International audience; Periodically supported beams subjected to a moving load are often used for modelling the railway dynamics and analytical solutions have been developed for such modelling [3, 4]. More complex models can be constructed by including supports with damping or non-linear stiffness elements. This study deals with the dynamical modelling of non-ballasted railways, especially railways in tunnels. The model is developed as a dynamical system of multi-degree of freedom. Under the...

Hoarseness and vocal tract discomfort and associated risk factors in air traffic controllers.

Science.gov (United States)

Korn, Gustavo Polacow; Villar, Anna Carolina; Azevedo, Renata Rangel

2018-04-05

An air traffic controller is a professional who performs air traffic control functions in air traffic control units and is responsible for controlling the various stages of a flight. To compare hoarseness and vocal tract discomfort and their risk factors among air traffic controllers in the approach control of São Paulo. In a cross-sectional survey, a voice self-evaluation adapted from to self-evaluation prepared by the Brazilian Ministry of Labor for teachers was administered to 76 air traffic controllers at approach control of São Paulo, Brazil. The percentage of hoarseness and vocal tract discomfort was 19.7% and 38.2%, respectively. In relation to air pollution, the percentages of hoarseness and vocal tract discomfort were higher among those who consider their working environment to be intolerable than among those in a comfortable or disturbing environment. The percentage of hoarseness was higher among those who seek medical advice due to vocal complaints and among those who experience difficulty using their voice at work than among those who experience mild or no difficulty. The percentage of vocal tract discomfort was higher among those in a very tense and stressful environment than among those who consider their work environment to be mild or moderately tense and stressful. The percentage of vocal tract discomfort was higher among those who describe themselves as very tense and stressed or tense and stressed than among those who describe themselves as calm. Additionally, the percentage of vocal tract discomfort was higher among those who care about their health. Among air traffic controllers, the percentage of vocal tract discomfort was almost twice that of hoarseness. Both symptoms are prevalent among air traffic controllers who considered their workplace intolerable in terms of air pollution. Vocal tract discomfort was related to a tense and stressful environment, and hoarseness was related to difficulty using the voice at work. Copyright © 2018 Associa

An Analytical Design Method for a Regenerative Braking Control System for DC-electrified Railway Systems under Light Load Conditions

Science.gov (United States)

Saito, Tatsuhito; Kondo, Keiichiro; Koseki, Takafumi

A DC-electrified railway system that is fed by diode rectifiers at a substation is unable to return the electric power to an AC grid. Accordingly, the braking cars have to restrict regenerative braking power when the power consumption of the powering cars is not sufficient. However, the characteristics of a DC-electrified railway system, including the powering cars, is not known, and a mathematical model for designing a controller has not been established yet. Hence, the object of this study is to obtain the mathematical model for an analytical design method of the regenerative braking control system. In the first part of this paper, the static characteristics of this system are presented to show the position of the equilibrium point. The linearization of this system at the equilibrium point is then performed to describe the dynamic characteristics of the system. An analytical design method is then proposed on the basis of these characteristics. The proposed design method is verified by experimental tests with a 1kW class miniature model, and numerical simulations.

Adaptive Traffic Control Systems in a medium-sized Scandinavian city

DEFF Research Database (Denmark)

Agerholm, Niels; Olesen, Anne Vingaard

2018-01-01

Adaptive Traffic Control Systems (ATCS) are aimed at reducing congestion. ATCS adapt to approaching traffic to continuously optimise the traffic flows in question. ATCS have been implemented in many locations, including the Scandinavian countries, with various effects. Due to congestion problems......, and GPS data from a range of cars driving on the ring road formed the basis for the study. The result of ATCS implementation was a significant 17% reduction in transportation time on the ring road in the most congested period, the afternoon peak. Less significant effects were found regarding the morning...

Annoyance and activity disturbance induced by high-speed railway and conventional railway noise: a contrastive case study.

Science.gov (United States)

Di, Guo-Qing; Lin, Qi-Li; Li, Zheng-Guang; Kang, Jian

2014-03-07

High-speed railway (HR, Electrified railway with service speed above 200 km/h.) noise and conventional railway (CR, Electrified railway with service speed under 200 km/h.) noise are different in both time and frequency domain. There is an urgent need to study the influence of HR noise and consequently, develop appropriate noise evaluation index and limits for the total railway noise including HR and CR noise. Based on binaural recording of HR and CR noises in a approximate semi-free field, noise annoyance and activity disturbance induced by maximal train pass-by events in China were investigated through laboratory subjective evaluation. 80 students within recruited 102 students, 40 males and 40 females, 23.9 ± 2.1 years old, were finally selected as the subjects. After receiving noise stimulus via headphone of a binaural audio playback system, subjects were asked to express the annoyance or activity disturbance due to railway noise at a 0-100 numerical scale. The results show that with the same annoyance rating (A) or activity disturbance rating (D), the A-weighted equivalent sound pressure level (LAeq) of CR noise is approximately 7 dB higher than that of HR noise. Linear regression analysis between some acoustical parameters and A (or D) suggests that the coefficient of determination (R2) is higher with the instantaneous fast A-weighted sound pressure level (LAFmax) than that with LAeq. A combined acoustical parameter, LHC = 1.74LAFmax + 0.008LAFmax(Lp-LAeq), where Lp is the sound pressure level, was derived consequently, which could better evaluate the total railway noise, including HR and CR noise. More importantly, with a given LHC, the noise annoyance of HR and CR noise is the same. Among various acoustical parameters including LHC and LAeq, A and D have the highest correlation with LHC. LHC has been proved to be an appropriate index to evaluate the total railway noise, including both HR and CR. However, it should be pointed out that this study provides

Web-based Traffic Noise Control Support System for Sustainable Transportation

Science.gov (United States)

Fan, Lisa; Dai, Liming; Li, Anson

Traffic noise is considered as one of the major pollutions that will affect our communities in the future. This paper presents a framework of web-based traffic noise control support system (WTNCSS) for a sustainable transportation. WTNCSS is to provide the decision makers, engineers and publics a platform to efficiently access the information, and effectively making decisions related to traffic control. The system is based on a Service Oriented Architecture (SOA) which takes the advantages of the convenience of World Wide Web system with the data format of XML. The whole system is divided into different modules such as the prediction module, ontology-based expert module and dynamic online survey module. Each module of the system provides a distinct information service to the decision support center through the HTTP protocol.

Railway timetabling from an operations research

NARCIS (Netherlands)

L.G. Kroon (Leo); D. Huisman (Dennis); G. Maróti (Gábor)

2007-01-01

textabstractIn this paper we describe Operations Research (OR) models and techniques that can be used for determining (cyclic) railway timetables. We discuss the two aspects of railway timetabling: ($i$) the determination of arrival and departure times of the trains at the stations and other

Processes mediating expertise in air traffic control

NARCIS (Netherlands)

Van Meeuwen, Ludo; Jarodzka, Halszka; Brand-Gruwel, Saskia; Van Merriënboer, Jeroen; De Bock, Jeano; Kirschner, Paul A.

2011-01-01

Van Meeuwen, L. W., Jarodzka, H., Brand-Gruwel, S., Van Merriënboer, J. J. G., De Bock, J. J. P. R., & Kirschner, P. A. (2010, September). Processes mediating expertise in air traffic control. Poster presented at the European Association for Aviation Psychology Conference, Budapest.

An optimal general type-2 fuzzy controller for Urban Traffic Network

DEFF Research Database (Denmark)

Khooban, Mohammad Hassan; Vafamand, Navid; Liaghat, Alireza

2017-01-01

Urban traffic network model is illustrated by state-charts and object-diagram. However, they have limitations to show the behavioral perspective of the Traffic Information flow. Consequently, a state space model is used to calculate the half-value waiting time of vehicles. In this study......, a combination of the general type-2 fuzzy logic sets and the Modified Backtracking Search Algorithm (MBSA) techniques are used in order to control the traffic signal scheduling and phase succession so as to guarantee a smooth flow of traffic with the least wait times and average queue length. The parameters...

Local cyclic deformation behavior and microstructure of railway wheel materials

International Nuclear Information System (INIS)

Walther, F.; Eifler, D.

2004-01-01

The current investigations concentrate on the relation between the loading and environmental conditions, the local microstructure and the fatigue behavior of highly stressed railway wheel and tire steels. Experiments under stress control and total strain control were performed at ambient temperature with servohydraulic testing systems. Superimposed mean loadings allow an evaluation of cyclic creep and mean stress relaxation effects. Strain, temperature and electrical measuring techniques were used to characterize the cyclic deformation behavior of specimens from different depth positions of the cross-sections of UIC-specified wheel components (UIC: International Railway Union). The measured values show a strong interrelation. The microstructural characterization of the different material conditions was done by light and scanning electron microscopy together with digital image processing

Comparison of Socioeconomic Factors between Surrounding and Non-Surrounding Areas of the Qinghai–Tibet Railway before and after Its Construction

Directory of Open Access Journals (Sweden)

Shicheng Li

2016-08-01

Full Text Available As the world’s highest railway, and the longest highland railway, the Qinghai–Tibet Railway (QTR has been paid considerable attention by researchers. However, most attention has been paid to the ecological and environmental issues affecting it, and sustainable ecological, social, and economic development-related studies of the QTR are rare. In this study, by analyzing the passenger traffic, freight traffic, passenger-kilometers, and freight-kilometers of the QTR for the period 1982–2013 and the transport structure of the Tibetan Plateau (TP for 1990–2013, the evolutionary process of the transport system in the TP following the construction of the QTR has been revealed. Subsequently, by comparing Gross Domestic Product (GDP, population, industrial structure, and urbanization level at the county and 1 km scales between surrounding and non-surrounding areas of the QTR, the differences in socioeconomic performance before and after its construction were detected. The results show that (1 in the TP, the highway-dominated transport system will break up and an integrated and sustainable transport system will form; (2 at the county scale, the annual growth rates of GDP of counties surrounding the QTR were greater than those of non-surrounding counties for the period 2000–2010. At the 1 km scale, following the opening of the completed line, the GDP of surrounding areas had a greater growth rate than before; (3 analysis at the county and 1 km scales indicated that population was not aggregated into the surrounding areas of the QTR in the period 2000–2010; (4 in terms of industrial structure, the proportion of primary industry decreased continuously, while the proportion of secondary and tertiary industries increased overall in the period 1984–2012. The QTR had no obvious impact on changes in the urbanization level of its surrounding areas.

A new traffic control design method for large networks with signalized intersections

Science.gov (United States)

Leininger, G. G.; Colony, D. C.; Seldner, K.

1979-01-01

The paper presents a traffic control design technique for application to large traffic networks with signalized intersections. It is shown that the design method adopts a macroscopic viewpoint to establish a new traffic modelling procedure in which vehicle platoons are subdivided into main stream queues and turning queues. Optimization of the signal splits minimizes queue lengths in the steady state condition and improves traffic flow conditions, from the viewpoint of the traveling public. Finally, an application of the design method to a traffic network with thirty-three signalized intersections is used to demonstrate the effectiveness of the proposed technique.

Creating a systems engineering approach for the manual on uniform traffic control devices.

Science.gov (United States)

2011-03-01

The Manual on Uniform Traffic Control Devices (MUTCD) provides basic principles for use of traffic : control devices (TCD). However, most TCDs are not explicitly required, and the decision to use a given : TCD in a given situation is typically made b...

DC Cable for Railway

Science.gov (United States)

Tomita, Masaru

The development of a superconducting cable for railways has commenced, assuming that a DC transmission cable will be used for electric trains. The cable has been fabricated based on the results of current testing of a superconducting wire, and various evaluation tests have been performed to determine the characteristics of the cable. A superconducting transmission cable having zero electrical resistance and suitable for railway use is expected to enhance regeneration efficiency, reduce power losses, achieve load leveling and integration of sub-stations, and reduce rail potential.

Positive well-being and work-life balance among UK railway staff

OpenAIRE

Fan, Jialin; Smith, Andrew

2017-01-01

Failure to manage the well-being and work-life balance of railway workers\\ud may result in an increased risk to train safety and employees’ health. This article\\ud reports the findings of a study that measured positive well-being and\\ud work-life balance, and identified the factors affecting these among UK railway\\ud staff. On the whole, staff who perceived high levels of control and support had\\ud a better work-life balance and an increased sense of well-being. A positive\\ud personality was ...

User’s Manual for the Simulation of Energy Consumption and Emissions from Rail Traffic Software Package

DEFF Research Database (Denmark)

Cordiero, Tiago M.; Lindgreen, Erik Bjørn Grønning; Sorenson, Spencer C

2005-01-01

The ARTEMIS rail emissions model was implemented in a Microsoft Excel software package that includes data from the GISCO database on railway traffic. This report is the user’s manual for the aforementioned software that includes information on how to run the program and an overview on how...... of Excel Macros (Visual Basic) and database sheets included in one Excel file...

Controlling Air Traffic (Simulated) in the Presence of Automation (CATS PAu) 1995: A Study of Measurement Techniques for Situation Awareness in Air Traffic Control

Science.gov (United States)

French, Jennifer R.

1995-01-01

As automated systems proliferate in aviation systems, human operators are taking on less and less of an active role in the jobs they once performed, often reducing what should be important jobs to tasks barely more complex than monitoring machines. When operators are forced into these roles, they risk slipping into hazardous states of awareness, which can lead to reduced skills, lack of vigilance, and the inability to react quickly and competently when there is a machine failure. Using Air Traffic Control (ATC) as a model, the present study developed tools for conducting tests focusing on levels of automation as they relate to situation awareness. Subjects participated in a two-and-a-half hour experiment that consisted of a training period followed by a simulation of air traffic control similar to the system presently used by the FAA, then an additional simulation employing automated assistance. Through an iterative design process utilizing numerous revisions and three experimental sessions, several measures for situational awareness in a simulated Air Traffic Control System were developed and are prepared for use in future experiments.

Passenger Perspectives in Railway Timetabling: A Literature Review

DEFF Research Database (Denmark)

Jensen, Jens Parbo; Nielsen, Otto Anker; Prato, Carlo Giacomo

2016-01-01

When looking at railway planning, a discrepancy exists between planners who focus on the train operations and publish fixed railway schedules, and passengers who look not only at the schedules but also at the entirety of their trip, from access to waiting to on-board travel and egress. Looking...... with fluctuating passenger demand. A key aspect is the robustness of railway timetables. Empirical evidence indicates that passengers give more importance to travel time certainty than travel time reductions, as passengers associate an inherent disutility with travel time uncertainty. This disutility may...... be broadly interpreted as an anxiety cost for the need for having contingency plans in case of disruptions, and may be looked at as the motivator for the need for delay-robust railway timetables. Interestingly, passenger-oriented optimisation studies considering robustness in railway planning typically limit...

Evaluation of a Trapezoidal Predictive Controller for a Four-Wire Active Power Filter for Utility Equipment of Metro Railway, Power-Land Substations

Directory of Open Access Journals (Sweden)

Sergio Salas-Duarte

2016-01-01

Full Text Available The realization of an improved predictive current controller based on a trapezoidal model is described, and the impact of this technique is assessed on the performance of a 2 kW, 21.6 kHz, four-wire, Active Power Filter for utility equipment of Metro Railway, Power-Land Substations. The operation of the trapezoidal predictive current controller is contrasted with that of a typical predictive control technique, based on a single Euler approximation, which has demonstrated generation of high-quality line currents, each using a 400 V DC link to improve the power quality of an unbalanced nonlinear load of Metro Railway. The results show that the supply current waveforms become virtually sinusoidal waves, reducing the current ripple by 50% and improving its power factor from 0.8 to 0.989 when the active filter is operated with a 1.6 kW load. The principle of operation of the trapezoidal predictive controller is analysed together with a description of its practical development, showing experimental results obtained with a 2 kW prototype.

The Network effects of Railway Investments

DEFF Research Database (Denmark)

Hansen, Sten; Landex, Alex; Kaas, Anders H.

2006-01-01

Network effects is when a change at one place in the railway network results in changes elsewhere in the network – maybe even far away from the original change. Railway investments have network effects, and therefore, this paper describes the network effects and how these network effects can...

Property relationships of the physical infrastructure and the traffic flow networks

Science.gov (United States)

Zhou, Ta; Zou, Sheng-Rong; He, Da-Ren

2010-03-01

We studied both empirically and analytically the correlation between the degrees or the clustering coefficients, respectively, of the networks in the physical infrastructure and the traffic flow layers in three Chinese transportation systems. The systems are bus transportation systems in Beijing and Hangzhou, and the railway system in the mainland. It is found that the correlation between the degrees obey a linear function; while the correlation between the clustering coefficients obey a power law. A possible dynamic explanation on the rules is presented.

Dynamics of railway bridges, analysis and verification by field tests

Directory of Open Access Journals (Sweden)

Andersson Andreas

2015-01-01

Full Text Available The following paper discusses different aspects of railway bridge dynamics, comprising analysis, modelling procedures and experimental testing. The importance of realistic models is discussed, especially regarding boundary conditions, load distribution and soil-structure interaction. Two theoretical case studies are presented, involving both deterministic and probabilistic assessment of a large number of railway bridges using simplified and computationally efficient models. A total of four experimental case studies are also introduced, illustrating different aspects and phenomena in bridge dynamics. The excitation consists of both ambient vibrations, train induced vibrations, free vibrations after train passages and controlled forced excitation.

Operating a railway system within a challenging environment: Economic history and experiences of Zimbabwe’s national railways

Directory of Open Access Journals (Sweden)

Charles Mbohwa

2008-11-01

Full Text Available This paper presents a historical background to the development of the railways in Zimbabwe and then discusses their current state. Besides being a landlocked country in Southern Africa, Zimbabwe has since 2000 been saddled with socio-economic and political challenges which have seen a decline in all economic indices, hence posing some challenges to its railways. This article discusses the challenges faced by the railways as a result of high inflation, unstable currency exchange rate, brain drain, poor management, government interference in management, customs border delays, and energy shortage. The problems have been addressed in unique ways and unusual solutions are proposed. These include customer financing for maintenance and spares and the resuscitation of steam locomotives. The presented solutions, lessons and issues from this experience contribute to discussions and study of railway logistics in challenging environments. Finally, current and future research issues, which have a global appeal, are presented.

Characteristics of suicide hotspots on the Belgian railway network.

Science.gov (United States)

Debbaut, Kevin; Krysinska, Karolina; Andriessen, Karl

2014-01-01

In 2004, railway suicide accounted for 5.3% of all suicides in Belgium. In 2008, Infrabel (Manager of the Belgian Railway Infrastructure) introduced a railway suicide prevention programme, including identification of suicide hotspots, i.e., areas of the railway network with an elevated incidence of suicide. The study presents an analysis of 43 suicide hotspots based on Infrabel data collected during field visits and semi-structured interviews conducted in mental health facilities in the vicinity of the hotspots. Three major characteristics of the hotspots were accessibility, anonymity, and vicinity of a mental health institution. The interviews identified several risk and protective factors for railway suicide, including the training of staff, introduction of a suicide prevention policy, and the role of the media. In conclusion, a comprehensive railway suicide prevention programme should continuously safeguard and monitor hotspots, and should be embedded in a comprehensive suicide prevention programme in the community.

Approaches for reducing structural vibration of the carbody railway vehicles

Directory of Open Access Journals (Sweden)

Dumitriu Mădălina

2017-01-01

Full Text Available Reducing the weight of the railway vehicles stands as a decisive rule in their design, entailed by higher velocities, the need to consume less energy and lower the manufacturing costs, along with the maximization of the use of loads on the axle. Once complied with this rule, the vehicle flexibility increases and leads to an easy excitation of the structural vibrations in the carbody, with an impact upon the ride comfort in the railway vehicle. For a better ride comfort in lightweight railway vehicles, both vibration isolation approaches and structural damping approaches have been introduced. The paper herein submits a brief review of the main structural damping approaches aiming to reduce the amplitude in the carbody structural vibrations, based on the use of the piezoelectric elements in passive control schemes. The paper outcomes show the potential of the presented methods concerning the reduction of the flexible vibrations in the carbody and the ride comfort improvement.

Air Traffic Controllers' Control Strategies in the Terminal Area Under Off-Nominal Conditions

Science.gov (United States)

Martin, Lynne; Mercer, Joey; Callantine, Todd; Kupfer, Michael; Cabrall, Christopher

2012-01-01

A human-in-the-loop simulation investigated the robustness of a schedule-based terminal-area air traffic management concept, and its supporting controller tools, to off-nominal events - events that led to situations in which runway arrival schedules required adjustments and controllers could no longer use speed control alone to impose the necessary delays. The main research question was exploratory: to assess whether controllers could safely resolve and control the traffic during off-nominal events. A focus was the role of the supervisor - how he managed the schedules, how he assisted the controllers, what strategies he used, and which combinations of tools he used. Observations and questionnaire responses revealed supervisor strategies for resolving events followed a similar pattern: a standard approach specific to each type of event often resolved to a smooth conclusion. However, due to the range of factors influencing the event (e.g., environmental conditions, aircraft density on the schedule, etc.), sometimes the plan required revision and actions had a wide-ranging effect.

A three-level framework for performance-based railway timetabling

NARCIS (Netherlands)

Goverde, R.M.P.; Besinovic, N.; Binder, A.; Cacchiani, V.; Quaglietta, E.; Roberti, R.; Toth, P.

2015-01-01

The performance of railway operations depends highly on the quality of the railway timetable. In particular for dense railway networks it can be a challenge to obtain a stable robust conflict-free and energy-efficient timetable with acceptable infrastructure occupation and short travel times. This

Multiobjective Traffic Signal Control Model for Intersection Based on Dynamic Turning Movements Estimation

Directory of Open Access Journals (Sweden)

Pengpeng Jiao

2014-01-01

Full Text Available The real-time traffic signal control for intersection requires dynamic turning movements as the basic input data. It is impossible to detect dynamic turning movements directly through current traffic surveillance systems, but dynamic origin-destination (O-D estimation can obtain it. However, the combined models of dynamic O-D estimation and real-time traffic signal control are rare in the literature. A framework for the multiobjective traffic signal control model for intersection based on dynamic O-D estimation (MSC-DODE is presented. A state-space model using Kalman filtering is first formulated to estimate the dynamic turning movements; then a revised sequential Kalman filtering algorithm is designed to solve the model, and the root mean square error and mean percentage error are used to evaluate the accuracy of estimated dynamic turning proportions. Furthermore, a multiobjective traffic signal control model is put forward to achieve real-time signal control parameters and evaluation indices. Finally, based on practical survey data, the evaluation indices from MSC-DODE are compared with those from Webster method. The actual and estimated turning movements are further input into MSC-DODE, respectively, and results are also compared. Case studies show that results of MSC-DODE are better than those of Webster method and are very close to unavailable actual values.

High-speed railways in Japan

International Nuclear Information System (INIS)

Kyotani, Y.

1974-01-01

This paper reviews the development of conventional railways in Japan, leading up to the Shinkansen line, which at present runs at speeds up to 210km/h, and will in the future be speeded up to 260km/h. It then goes on to review the development of a superconductive, magnetically levitated train, which will constitute the next generation of railways, running at speeds of up to 500km/h. (author)

How do Air Traffic Controllers Use Automation and Tools Differently During High Demand Situations?

Science.gov (United States)

Kraut, Joshua M.; Mercer, Joey; Morey, Susan; Homola, Jeffrey; Gomez, Ashley; Prevot, Thomas

2013-01-01

In a human-in-the-loop simulation, two air traffic controllers managed identical airspace while burdened with higher than average workload, and while using advanced tools and automation designed to assist with scheduling aircraft on multiple arrival flows to a single meter fix. This paper compares the strategies employed by each controller, and investigates how the controllers' strategies change while managing their airspace under more normal workload conditions and a higher workload condition. Each controller engaged in different methods of maneuvering aircraft to arrive on schedule, and adapted their strategies to cope with the increased workload in different ways. Based on the conclusions three suggestions are made: that quickly providing air traffic controllers with recommendations and information to assist with maneuvering and scheduling aircraft when burdened with increased workload will improve the air traffic controller's effectiveness, that the tools should adapt to the strategy currently employed by a controller, and that training should emphasize which traffic management strategies are most effective given specific airspace demands.

Towards the Internet of Smart Trains: A Review on Industrial IoT-Connected Railways.

Science.gov (United States)

Fraga-Lamas, Paula; Fernández-Caramés, Tiago M; Castedo, Luis

2017-06-21

Nowadays, the railway industry is in a position where it is able to exploit the opportunities created by the IIoT (Industrial Internet of Things) and enabling communication technologies under the paradigm of Internet of Trains. This review details the evolution of communication technologies since the deployment of GSM-R, describing the main alternatives and how railway requirements, specifications and recommendations have evolved over time. The advantages of the latest generation of broadband communication systems (e.g., LTE, 5G, IEEE 802.11ad) and the emergence of Wireless Sensor Networks (WSNs) for the railway environment are also explained together with the strategic roadmap to ensure a smooth migration from GSM-R. Furthermore, this survey focuses on providing a holistic approach, identifying scenarios and architectures where railways could leverage better commercial IIoT capabilities. After reviewing the main industrial developments, short and medium-term IIoT-enabled services for smart railways are evaluated. Then, it is analyzed the latest research on predictive maintenance, smart infrastructure, advanced monitoring of assets, video surveillance systems, railway operations, Passenger and Freight Information Systems (PIS/FIS), train control systems, safety assurance, signaling systems, cyber security and energy efficiency. Overall, it can be stated that the aim of this article is to provide a detailed examination of the state-of-the-art of different technologies and services that will revolutionize the railway industry and will allow for confronting today challenges.

Towards the Internet of Smart Trains: A Review on Industrial IoT-Connected Railways

Science.gov (United States)

Fraga-Lamas, Paula; Fernández-Caramés, Tiago M.; Castedo, Luis

2017-01-01

Nowadays, the railway industry is in a position where it is able to exploit the opportunities created by the IIoT (Industrial Internet of Things) and enabling communication technologies under the paradigm of Internet of Trains. This review details the evolution of communication technologies since the deployment of GSM-R, describing the main alternatives and how railway requirements, specifications and recommendations have evolved over time. The advantages of the latest generation of broadband communication systems (e.g., LTE, 5G, IEEE 802.11ad) and the emergence of Wireless Sensor Networks (WSNs) for the railway environment are also explained together with the strategic roadmap to ensure a smooth migration from GSM-R. Furthermore, this survey focuses on providing a holistic approach, identifying scenarios and architectures where railways could leverage better commercial IIoT capabilities. After reviewing the main industrial developments, short and medium-term IIoT-enabled services for smart railways are evaluated. Then, it is analyzed the latest research on predictive maintenance, smart infrastructure, advanced monitoring of assets, video surveillance systems, railway operations, Passenger and Freight Information Systems (PIS/FIS), train control systems, safety assurance, signaling systems, cyber security and energy efficiency. Overall, it can be stated that the aim of this article is to provide a detailed examination of the state-of-the-art of different technologies and services that will revolutionize the railway industry and will allow for confronting today challenges. PMID:28635672

Proposal of Wireless Traffic Control Schemes for Wireless LANs

Science.gov (United States)

Hiraguri, Takefumi; Ichikawa, Takeo; Iizuka, Masataka; Kubota, Shuji

This paper proposes two traffic control schemes to support the communication quality of multimedia streaming services such as VoIP and audio/video over IEEE 802.11 wireless LAN systems. The main features of the proposed scheme are bandwidth control for each flow of the multimedia streaming service and load balancing between access points (APs) of the wireless LAN by using information of data link, network and transport layers. The proposed schemes are implemented on a Linux machine which is called the wireless traffic controller (WTC). The WTC connects a high capacity backbone network and an access network to which the APs are attached. We evaluated the performance of the proposed WTC and confirmed that the communication quality of the multimedia streaming would be greatly improved by using this technique.

Truck circuits diagnosis for railway lines equipped with an automatic block signalling system

Science.gov (United States)

Spunei, E.; Piroi, I.; Muscai, C.; Răduca, E.; Piroi, F.

2018-01-01

This work presents a diagnosis method for detecting track circuits failures on a railway traffic line equipped with an Automatic Block Signalling installation. The diagnosis method uses the installation’s electrical schemas, based on which a series of diagnosis charts have been created. Further, the diagnosis charts were used to develop a software package, CDCBla, which substantially contributes to reducing the diagnosis time and human error during failure remedies. The proposed method can also be used as a training package for the maintenance staff. Since the diagnosis method here does not need signal or measurement inputs, using it does not necessitate additional IT knowledge and can be deployed on a mobile computing device (tablet, smart phone).

Information Presentation and Control in a Modern Air Traffic Control Tower Simulator

Science.gov (United States)

Haines, Richard F.; Doubek, Sharon; Rabin, Boris; Harke, Stanton

1996-01-01

The proper presentation and management of information in America's largest and busiest (Level V) air traffic control towers calls for an in-depth understanding of many different human-computer considerations: user interface design for graphical, radar, and text; manual and automated data input hardware; information/display output technology; reconfigurable workstations; workload assessment; and many other related subjects. This paper discusses these subjects in the context of the Surface Development and Test Facility (SDTF) currently under construction at NASA's Ames Research Center, a full scale, multi-manned, air traffic control simulator which will provide the "look and feel" of an actual airport tower cab. Special emphasis will be given to the human-computer interfaces required for the different kinds of information displayed at the various controller and supervisory positions and to the computer-aided design (CAD) and other analytic, computer-based tools used to develop the facility.

From Goods to Traffic:First Steps Toward an Auction-based Traffic Signal Controller

OpenAIRE

Raphael, Jeffery; Maskell, Simon; Sklar, Elizabeth Ida

2015-01-01

Traffic congestion is a major issue that plagues many urban road networks large and small. Traffic engineers are now leaning towards Intelligent Traffic Systems as many physical changes to road networks are costly or infeasible. Multi-Agent Systems (MAS) have become a popular paradigm for intelligent solutions to traffic management problems. There are many MAS approaches to traffic management that utilise market mechanisms. In market-based approaches, drivers “pay” to use the roadways. Howeve...

Reverse Stackelberg Games : Theory and Applications in Traffic Control

NARCIS (Netherlands)

Groot, N.B.

2013-01-01

One of the major challenges in optimization-based control of large-scale intelligent infrastructural networks such as traffic networks is to find efficient multilevel optimization schemes through which decisions can be made by agents or controllers of different interacting layers. The hierarchical

Processes mediating expertise in air traffic control

NARCIS (Netherlands)

Van Meeuwen, Ludo; Jarodzka, Halszka; Brand-Gruwel, Saskia; Van Merriënboer, Jeroen; De Bock, Jeano; Kirschner, Paul A.

2010-01-01

Van Meeuwen, L., Jarodzka, H., Brand-Gruwel, S., Van Merriënboer, J. J. G., De Bock, J. J. P. R., & Kirschner, P. A. (2010, August). Processes mediating expertise in air traffic control. Meeting of the EARLI SIG6/7 Instructional Design and Learning and Instruction with Computers, Ulm, Germany.

A PROPOSAL FOR MAKING A RISK MAP OF ROCKFALL BY EVALUATING THE INFLUENCE TO RAILWAY TRACK

Science.gov (United States)

Fukata, Takahiro; Mori, Taiki; Shibuya, Satoru

An incident of rockfall may trigger serious damage to the safety as well as the after-the-event maintenance of railway transportation. In an attempt to minimize such damage caused by rockfall incident, the railway companies regularly in spect the concerned slopes along the railway, and take necessary measures. In the current practice, however, it is very difficult to make a full control of slopes in danger spreading over the wide area due to the limited human and financial resources. Accordingly, it is urgently needed for the railway firms to establish cost-effective as well as reliable system for the slope management. A risk map based on the impact statement of rockfall to railway track is of great use for not only enhancing the efficiency of slope inspection, but also planning the disaster prevention of railway. In this paper, a methodology for establishing a risk map by considering the impact statement to railway truck in a quantitative manner is proposed. In so doing, the rockfall movement on a slope was numerically simulated in match with each categorized type of slopes. The applicability of this proposed method for the slope management practice is examined based on a number of case histories.

14 CFR Special Federal Aviation... - Air Traffic Control System Emergency Operation

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Air Traffic Control System Emergency Operation Federal Special Federal Aviation Regulation No. 60 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Pt. 91, SFAR No. 60...

Lifecycle Assessments of Railway Bridge Transitions Exposed to Extreme Climate Events

Directory of Open Access Journals (Sweden)

Sadudee Setsobhonkul

2017-06-01

Full Text Available Railway track components located at bridge transition zones or approach areas suffer from impact load and vibrations caused by abrupt changes in track stiffness on the bridge and the subgrade. The numerous strategies that can be used to mitigate these abrupt track stiffness changes rely on one of two concepts. The first concept is that of providing a gradual stiffness change, and the second is that of equalizing the track stiffness. A number of such mitigation methods have been developed and implemented over recent decades. Construction activities associated with these methods require various materials, processes, and uses of time, costs, and carbon emissions. In this study, eight of the most common techniques for railway bridge transition mitigation, including under ballast mats (UBMs, soft baseplates, under sleeper pads (USPs, rail pads, embankment treatments, transition slabs, ballast bonding, and wide sleepers, are compared. This study benchmarks the costs and carbon emissions of these eight mitigation techniques over the 50-year lifespan of a railway system subject to identical probabilities of four environmental scenarios: a control case, extremely high temperatures, extremely low temperatures, and flash flooding. This unprecedented study systemically investigates the effectiveness of the mitigation methods while considering the effects of 30 and 100 m bridge span lengths. Our results indicate that railway engineers should adopt different mitigation methods for different scenarios. The soft baseplate is the most appropriate method for a short-span bridge in the control case and the case of flash flooding, while ballast bonding is better for long-span railway bridges. Embankment treatment is recommended for both high- and low-extreme temperatures. However, its applicability is limited when the differential track stiffness is extremely high. Hence, alternatives that are 5–25% more expensive are proposed in parallel. The alternative

Air Traffic Control Officer AFSC 13MX OSSN 2335

National Research Council Canada - National Science Library

1999-01-01

The Air Traffic Control Officer utilization field was surveyed to better understand the utilization of AFSC 1 3MX personnel, validate training requirements, empirically determine career progression...

A Polynomial Estimate of Railway Line Delay

DEFF Research Database (Denmark)

Cerreto, Fabrizio; Harrod, Steven; Nielsen, Otto Anker

2017-01-01

Railway service may be measured by the aggregate delay over a time horizon or due to an event. Timetables for railway service may dampen aggregate delay by addition of additional process time, either supplement time or buffer time. The evaluation of these variables has previously been performed...... by numerical analysis with simulation. This paper proposes an analytical estimate of aggregate delay with a polynomial form. The function returns the aggregate delay of a railway line resulting from an initial, primary, delay. Analysis of the function demonstrates that there should be a balance between the two...

A Cooperative Traffic Control of Vehicle–Intersection (CTCVI) for the Reduction of Traffic Delays and Fuel Consumption

Science.gov (United States)

Li, Jinjian; Dridi, Mahjoub; El-Moudni, Abdellah

2016-01-01

The problem of reducing traffic delays and decreasing fuel consumption simultaneously in a network of intersections without traffic lights is solved by a cooperative traffic control algorithm, where the cooperation is executed based on the connection of Vehicle-to-Infrastructure (V2I). This resolution of the problem contains two main steps. The first step concerns the itinerary of which intersections are chosen by vehicles to arrive at their destination from their starting point. Based on the principle of minimal travel distance, each vehicle chooses its itinerary dynamically based on the traffic loads in the adjacent intersections. The second step is related to the following proposed cooperative procedures to allow vehicles to pass through each intersection rapidly and economically: on one hand, according to the real-time information sent by vehicles via V2I in the edge of the communication zone, each intersection applies Dynamic Programming (DP) to cooperatively optimize the vehicle passing sequence with minimal traffic delays so that the vehicles may rapidly pass the intersection under the relevant safety constraints; on the other hand, after receiving this sequence, each vehicle finds the optimal speed profiles with the minimal fuel consumption by an exhaustive search. The simulation results reveal that the proposed algorithm can significantly reduce both travel delays and fuel consumption compared with other papers under different traffic volumes. PMID:27999333

A Cooperative Traffic Control of Vehicle–Intersection (CTCVI for the Reduction of Traffic Delays and Fuel Consumption

Directory of Open Access Journals (Sweden)

Jinjian Li

2016-12-01

Full Text Available The problem of reducing traffic delays and decreasing fuel consumption simultaneously in a network of intersections without traffic lights is solved by a cooperative traffic control algorithm, where the cooperation is executed based on the connection of Vehicle-to-Infrastructure (V2I. This resolution of the problem contains two main steps. The first step concerns the itinerary of which intersections are chosen by vehicles to arrive at their destination from their starting point. Based on the principle of minimal travel distance, each vehicle chooses its itinerary dynamically based on the traffic loads in the adjacent intersections. The second step is related to the following proposed cooperative procedures to allow vehicles to pass through each intersection rapidly and economically: on one hand, according to the real-time information sent by vehicles via V2I in the edge of the communication zone, each intersection applies Dynamic Programming (DP to cooperatively optimize the vehicle passing sequence with minimal traffic delays so that the vehicles may rapidly pass the intersection under the relevant safety constraints; on the other hand, after receiving this sequence, each vehicle finds the optimal speed profiles with the minimal fuel consumption by an exhaustive search. The simulation results reveal that the proposed algorithm can significantly reduce both travel delays and fuel consumption compared with other papers under different traffic volumes.

Modeling thermal effects in braking systems of railway vehicles

Directory of Open Access Journals (Sweden)

Milošević Miloš S.

2012-01-01

Full Text Available The modeling of thermal effects has become increasingly important in product design in different transport means, road vehicles, airplanes, railway vehicles, and so forth. The thermal analysis is a very important stage in the study of braking systems, especially of railway vehicles, where it is necessary to brake huge masses, because the thermal load of a braked railway wheel prevails compared to other types of loads. In the braking phase, kinetic energy transforms into thermal energy resulting in intense heating and high temperature states of railway wheels. Thus induced thermal loads determine thermomechanical behavior of the structure of railway wheels. In cases of thermal overloads, which mainly occur as a result of long-term braking on down-grade railroads, the generation of stresses and deformations occurs, whose consequences are the appearance of cracks on the rim of a wheel and the final total wheel defect. The importance to precisely determine the temperature distribution caused by the transfer process of the heat generated during braking due to the friction on contact surfaces of the braking system makes it a challenging research task. Therefore, the thermal analysis of a block-braked solid railway wheel of a 444 class locomotive of the national railway operator Serbian Railways is processed in detail in this paper, using analytical and numerical modeling of thermal effects during long-term braking for maintaining a constant speed on a down-grade railroad.

Traffic flow model at fixed control signals with discrete service time distribution

Directory of Open Access Journals (Sweden)

Lucky I. Igbinosun

2016-04-01

Full Text Available Most of the models of road traffic flow at fixed-cycle controlled intersection assume stationary distributions and provide steady state results. The assumption that a constant number of vehicles can leave the system during the green phase is unrealistic in real life situations. A discrete time queuing model was developed to describe the operation of traffic flow at a road intersection with fixed-cycle signalized control and to account for the randomness in the number of vehicles that can leave the system. The results show the expected queue size in the system when the traffic is light and for a busy period, respectively. For the light period, when the traffic intensity is less than one, it takes a shorter green cycle time for vehicles to clear up than during high traffic intensity (the road junction is saturated. Increasing the number of cars that can leave the junction at the turn of the green phase reduces the number of cycle times before the queue is cleared.

Data mining of air traffic control operational errors

Science.gov (United States)

2006-01-01

In this paper we present the results of : applying data mining techniques to identify patterns and : anomalies in air traffic control operational errors (OEs). : Reducing the OE rate is of high importance and remains a : challenge in the aviation saf...

Guideline for load and resistance assessment of existing european railway bridges

OpenAIRE

JENSEN, Jens S; CASAS, Joan R; KAROUMI, Raid; PLOS, Mario; CREMONA, Christian; MELBOURNE, Clive

2008-01-01

Many of the European railway bridges are getting close to the end of their service life. At the same time the railway operators demand higher axle loads for freight trains and higher speeds for passenger trains. This requires new and better approaches for assessing both the railway loads and the resistance of railway bridges. The main objective of the "Guideline for Load and Resistance Assessment of Existing European Railway Bridges", developed within EU founded project "Sustainable Bridge...

Vuosaari Harbour Road Tunnel Traffic Management and Incident Detection System Design Issues

Directory of Open Access Journals (Sweden)

Caj Holm

2006-11-01

Full Text Available Helsinki is constructing in Vuosaari a new modem and effectivecargo harbour. All cargo harbour activities will be concentratedthere. The total project includes the harbour, a logisticsarea, traffic connections (road, railway and fairway and aBusiness Park. The road connection goes through the Porvarinlahtiroad tunnel. The harbour will commence operatingin 2008. This paper gives an oveTView of the tunnel design phasefunctional studies and risk analysis tunnel incident detectionsystem design issues and some specific environmental featuresof the tunnel.

Relative position vectors: an alternative approach to conflict detection in air traffic control.

Science.gov (United States)

Vuckovic, Anita; Sanderson, Penelope; Neal, Andrew; Gaukrodger, Stephen; Wong, B L William

2013-10-01

We explore whether the visual presentation of relative position vectors (RPVs) improves conflict detection in conditions representing some aspects of future airspace concepts. To help air traffic controllers manage increasing traffic, new tools and systems can automate more cognitively demanding processes, such as conflict detection. However, some studies reveal adverse effects of such tools, such as reduced situation awareness and increased workload. New displays are needed that help air traffic controllers handle increasing traffic loads. A new display tool based on the display of RPVs, the Multi-Conflict Display (MCD), is evaluated in a series of simulated conflict detection tasks. The conflict detection performance of air traffic controllers with the MCD plus a conventional plan-view radar display is compared with their performance with a conventional plan-view radar display alone. Performance with the MCD plus radar was better than with radar alone in complex scenarios requiring controllers to find all actual or potential conflicts, especially when the number of aircraft on the screen was large. However performance with radar alone was better for static scenarios in which conflicts for a target aircraft, or target pair of aircraft, were the focus. Complementing the conventional plan-view display with an RPV display may help controllers detect conflicts more accurately with extremely high aircraft counts. We provide an initial proof of concept that RPVs may be useful for supporting conflict detection in situations that are partially representative of conditions in which controllers will be working in the future.

Numerical analysis to determine the impact of land subsidence on high-speed railway routes in Beijing, China

Science.gov (United States)

Ye, C.; Yang, Y.; Tian, F.; Luo, Y.; Zhou, Y.

2015-11-01

More than 10 high-speed railway routes with top speeds of 300 km h-1 are expected to be operational from Beijing by the year 2020. However, the safety of these routes is affected by the occurrence of land subsidence. This paper focuses on the Beijing-Tianjin Intercity High-Speed Railway (BTR), the first high-speed railway in China, to analyze the operational safety of high-speed railway routes by analyzing both regional land subsidence and local differential subsidence caused by groundwater drawing. The Beijing construction stratum is mainly composed of cohesive soil, and the BTR has a maximum accumulative subsidence of > 800 mm and a maximum subsidence rate of > 80 mm a-1. In this paper, finite-element software ABAQUS is used to analyze groundwater drawdown and land subsidence caused by local water drawing, and its effect on the bearing capacity of railway bridge pile foundations and the orbit concrete supporting course. The analysis provides a technical basis for developing prevention and control engineering measures against land subsidence so as to guarantee the safe operation of these high-speed railway routes.

Evaluation of railway transportation efficiency based on super-cross efficiency

Science.gov (United States)

Kuang, Xiuyuan

2018-01-01

The efficiency of railway transportation is an important index. It can measure the development of railway transportation enterprises, and the efficiency of railway transportation has become a hot issue in the study of railway development. Data envelopment analysis (DEA) has been widely applied to railway efficiency analysis. In this paper, BBC model and super-cross efficiency model are constructed by using DEA theory, taking the 18 Railway Bureau as the research object, with the mileage, the number of employees, locomotive number, average daily loading number as input indicators, the passenger turnover, freight turnover and transport income as output indicators, then calculated and evaluated comprehensive efficiency, pure technical efficiency and scale efficiency. We get that the super-cross efficiency is more in line with the actual situation. Getting the super-cross efficiency is more in line with the actual situation.

Performance evaluation of traffic sensing and control devices : [technical summary].

Science.gov (United States)

2011-01-01

High quality sensing and control systems are essential for providing efficient signalized arterial operations. INDOT operates over 2600 traffic signal controllers, approximately 2000 of which use some form of vehicle detection. The private sector con...

Vulnerability assessment and mitigation for the Chinese railway system under floods

International Nuclear Information System (INIS)

Hong, Liu; Ouyang, Min; Peeta, Srinivas; He, Xiaozheng; Yan, Yongze

2015-01-01

The economy of China and the travel needs of its citizens depend significantly on the continuous and reliable services provided by its railway system. However, this system is subject to frequent natural hazards, such as floods, earthquakes, and debris flow. A mechanism to assess the railway system vulnerability under these hazards and the design of effective vulnerability mitigation strategies are essential to the reliable functioning of the railway system. This article proposes a comprehensive methodology to quantitatively assess the railway system vulnerability under floods using historical data and GIS technology. The proposed methodology includes a network representation of the railway system, the generation of flood event scenarios, a method to estimate railway link vulnerability, and a quantitative vulnerability value computation approach. The railway system vulnerability is evaluated in terms of its service disruption related to the number of interrupted trains and the durations of interruption. A maintenance strategy to mitigate vulnerability is proposed that simultaneously considers link vulnerability and number of trains using it. Numerical experiments show that the flood-induced vulnerability of the proposed representation of the Chinese railway system reaches its maximum monthly value in July, and the proposed vulnerability mitigation strategy is more effective compared to other strategies. - Highlights: • We propose a methodology to assess flood-induced railway system vulnerability. • Railway system vulnerability is evaluated in terms of its service disruption. • Chinese railway system reaches its maximum monthly vulnerability in July. • We propose an effective maintenance strategy considering link vulnerability and burden

32 CFR 245.17 - U.S. civil and military air traffic control facilities.

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false U.S. civil and military air traffic control facilities. 245.17 Section 245.17 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS PLAN FOR THE EMERGENCY SECURITY CONTROL OF AIR TRAFFIC (ESCAT) Procedures for Implementation of ESCAT §...

SURVEY RESULTS AND TESTING OF RAILWAY BRIDGES

Directory of Open Access Journals (Sweden)

I. H. Haniiev

2010-03-01

Full Text Available The article is devoted to the survey and testing of railway bridges by the State Joint-Stock Railway Company «Uzbekiston Temir Yollari» («Uzbekistan Railways». It is stated that in the existing rules on determination of the capacity of bridges the recommendations on taking into account the cumulative deflection to the moment of technical diagnostics of spans on the bridge capacity are absent. The author states on the need to develop a method for determining the wear of spans on restriction of the residual deflection in the bridge floor slabs.

TRAFFIC SIMULATION FOR MIXED TRAFFIC SYSTEMS

African Journals Online (AJOL)

EGETE

2012-05-04

May 4, 2012 ... Traffic problem is classified into single and mixed, especially in most developing countries, where motorbikes are ..... The traffic light control system presented by its location on ... multi-destination dynamic routing and real-time.

Estimation and Control of Networked Distributed Parameter Systems: Application to Traffic Flow

KAUST Repository

Canepa, Edward

2016-11-01

The management of large-scale transportation infrastructure is becoming a very complex task for the urban areas of this century which are covering bigger geographic spaces and facing the inclusion of connected and self-controlled vehicles. This new system paradigm can leverage many forms of sensing and interaction, including a high-scale mobile sensing approach. To obtain a high penetration sensing system on urban areas more practical and scalable platforms are needed, combined with estimation algorithms suitable to the computational capabilities of these platforms. The purpose of this work was to develop a transportation framework that is able to handle different kinds of sensing data (e.g., connected vehicles, loop detectors) and optimize the traffic state on a defined traffic network. The framework estimates the traffic on road networks modeled by a family of Lighthill-Whitham-Richards equations. Based on an equivalent formulation of the problem using a Hamilton-Jacobi equation and using a semi-analytic formula, I will show that the model constraints resulting from the Hamilton-Jacobi equation are linear, albeit with unknown integer variables. This general framework solve exactly a variety of problems arising in transportation networks: traffic estimation, traffic control (including robust control), cybersecurity and sensor fault detection, or privacy analysis of users in probe-based traffic monitoring systems. This framework is very flexible, fast, and yields exact results. The recent advances in sensors (GPS, inertial measurement units) and microprocessors enable the development low-cost dedicated devices for traffic sensing in cities, 5 which are highly scalable, providing a feasible solution to cover large urban areas. However, one of the main problems to address is the privacy of the users of the transportation system, the framework presented here is a viable option to guarantee the privacy of the users by design.

75 FR 63533 - Gulf & Ohio Railways Holding Co., Inc., H. Peter Claussen and Linda C. Claussen-Continuance in...

Science.gov (United States)

2010-10-15

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35414] Gulf & Ohio Railways Holding Co., Inc., H. Peter Claussen and Linda C. Claussen--Continuance in Control Exemption--Lancaster & Chester Railroad, LLC Gulf & Ohio Railways Holding Co., Inc. (G&O), H. Peter Claussen and Linda...

Approach to Issues in Planning and Operation of Railway BOT Projects

Institute of Scientific and Technical Information of China (English)

Zhao Xianghong; Chen Min

2009-01-01

As an internationally popular mode of public infrastructures' investment,construction and operation,BOT (build-operate-transfer) has been successfully applied in some countries and regions of the world for their infrastructures' construction and playing an important role in promoting the construction of public infrastructures.The Ministry of Railways clearly proposed in its Suggestions for Implementation of Encouraging,Supporting and Guiding Participation of Non-public-owned Economy in Railway Construction and Operation that it was necessary to study and take for reference multiple modes of public infrastructures'investment,construction and operation including BOT.It is more complicated and risky for the process of planning and operation of BOT projects.The paper takes for reference the domestic and foreign experiences in the operation of BOT projects,analyzes the issues that will arise such as risk control in implementing railway BOT projects,employment of professional consultants,financing coordination,tariff making,non-commercial subsidy,as well as operation and management,and puts forward corresponding suggestions for these issues.

A Polynomial Estimate of Railway Line Delay

DEFF Research Database (Denmark)

Cerreto, Fabrizio; Harrod, Steven; Nielsen, Otto Anker

2017-01-01

Railway service may be measured by the aggregate delay over a time horizon or due to an event. Timetables for railway service may dampen aggregate delay by addition of additional process time, either supplement time or buffer time. The evaluation of these variables has previously been performed...

Analysis of learning curves in the on-the-job training of air traffic controllers

NARCIS (Netherlands)

Oprins, E.A.P.B.; Bruggraaff, E.; Roe, R.

2011-01-01

This chapter describes a competence-based assessment system, called CBAS, for air traffic control (ATC) simulator and on-the-job training (OJT), developed at Air Traffic Control The Netherlands (LVNL). In contrast with simulator training, learning processes in OJT are difficult to assess, because

A Traffic Prediction Algorithm for Street Lighting Control Efficiency

Directory of Open Access Journals (Sweden)

POPA Valentin

2013-01-01

Full Text Available This paper presents the development of a traffic prediction algorithm that can be integrated in a street lighting monitoring and control system. The prediction algorithm must enable the reduction of energy costs and improve energy efficiency by decreasing the light intensity depending on the traffic level. The algorithm analyses and processes the information received at the command center based on the traffic level at different moments. The data is collected by means of the Doppler vehicle detection sensors integrated within the system. Thus, two methods are used for the implementation of the algorithm: a neural network and a k-NN (k-Nearest Neighbor prediction algorithm. For 500 training cycles, the mean square error of the neural network is 9.766 and for 500.000 training cycles the error amounts to 0.877. In case of the k-NN algorithm the error increases from 8.24 for k=5 to 12.27 for a number of 50 neighbors. In terms of a root means square error parameter, the use of a neural network ensures the highest performance level and can be integrated in a street lighting control system.

Area-wide traffic calming for preventing traffic related injuries.

Science.gov (United States)

Bunn, F; Collier, T; Frost, C; Ker, K; Roberts, I; Wentz, R

2003-01-01

It is estimated that by 2020 road traffic crashes will have moved from ninth to third in the world disease burden ranking, as measured in disability adjusted life years, and second in developing countries. The identification of effective strategies for the prevention of traffic related injuries is of global health importance. Area-wide traffic calming schemes that discourage through traffic on residential roads is one such strategy. To evaluate the effectiveness of area-wide traffic calming in preventing traffic related crashes, injuries, and deaths. We searched the following electronic databases: Cochrane Injuries Group's Specialised Register, Cochrane Controlled Trials Register, MEDLINE, EMBASE and TRANSPORT (NTIS, TRIS, TRANSDOC). We searched the web sites of road safety organisations, handsearched conference proceedings, checked reference lists of relevant papers and contacted experts in the area. The search was not restricted by language or publication status. Randomised controlled trials, and controlled before-after studies of area-wide traffic calming schemes. Two reviewers independently extracted data on type of study, characteristics of intervention and control areas, and length of data collection periods. Before and after data were collected on the total number of road traffic crashes, all road user deaths and injuries, pedestrian-motor vehicle collisions and road user deaths. The statistical package STATA was used to calculate rate ratios for each study, which were then pooled to give an overall estimate using a random effects model. We found no randomised controlled trials, but 16 controlled before-after trials met our inclusion criteria. Seven studies were done in Germany, six in the UK, two in Australia and one in the Netherlands. There were no studies in low or middle income countries. Eight trials reported the number of road traffic crashes resulting in deaths. The pooled rate ratio was 0.63 (0.14, 2.59 95% CI). Sixteen studies reported the number

EFFECT OF GROUND VIBRATION TO SLOPE STABILITY, CASE STUDY LANDSLIDE ON THE MOUTH OF RAILWAY TUNNEL, GUNUNG GAJAH VILLAGE, LAHAT DISTRICT

Directory of Open Access Journals (Sweden)

Moamar Aprilian Ghadafi

2017-12-01

Full Text Available Slope stability around railway tunnel in Gunung Gajah Village, Lahat District needs to be analysed due to landslide which occurred on January, 23th 2016. That analysis needs to be done so that the railway transportation system can run safely. The purposes of this research are: to find out the factors that cause slope instability, to find out peak acceleration caused by railway traffic and earthquakes and its effects to the safety factor of slope, and determine stabilization method in order to prevent the occurrence of further landslide. The research activities include surveying, sampling, laboratory testing and analyzing slope stability using pseudo-static approach. Based on research result, the main factors that cause slope instability are morphology, structural geology, and ground vibration caused by earthquakes. Ground vibration are correlated to the slope instability. It shows that the higher of peak acceleration the lower of safety factor of slope. To prevent the occurrence of further landslide around research area, stabilization method should be applied in accordance with the conditions in that area such as building a retaining wall to increase safety factor of slope, building draining channels to reduce run off and performing shotcrete in the wall of landslide in order to avoid weathering.

Air Traffic Controller Training at the FAA Academy

Science.gov (United States)

Cummings, Roy J.

1970-01-01

Describes air traffic controller training by discussing: (1) job description, (2) centralized training, (3) method of training, (4) laboratory arrangement, (5) staffing, (6) curriculum development, (7) staff training, (8) student reaction, and (9) training results and suggested improvements. Training Technology is a quarterly supplement to…

Impacts of temporary traffic control measures on vehicular emissions during the Asian games in Guangzhou, China.

Science.gov (United States)

Yao, Zhiliang; Zhang, Yingzhi; Shen, Xianbao; Wang, Xintong; Wu, Ye; He, Kebin

2013-01-01

To guarantee good traffic and air quality during the 16th Asian Games in Guangzhou, China, the government carried out two traffic control Drills before the Games and adopted traffic control measures during the Games. Vehicle activities before and during the first and second Drills, and during the Games, were surveyed. Based on the data under investigation, the impacts of control measures on traffic volumes and driving characteristics were analyzed during the first and second Drills, and the Games. The emission reduction of traffic control measures was also evaluated during the three stages using the MOBILE-China model. The results show that there were significant effects of implementing temporary traffic control measures on transportation activity and vehicular emissions. During the first and second Drills, and the Games, the average traffic volumes in monitored roads decreased, and the average speed of vehicles increased significantly The co-effects of traffic flow reduction, traffic congestion improvement, and the banning of high-emitting vehicles helped to greatly reduce the estimated emissions from motor vehicles in Guangzhou during the first and second Drills, and the Games. Estimated vehicular emissions were reduced by 38-52% during the first Drill and 28-36% for the second Drill. During the Asian Games, vehicular emissions of carbon monoxide (CO), hydrocarbon (HC), oxides of nitrogen (NO), and particulate matter with an aerodynamic diameter vehicular emissions of CO, HC, NOx, and PM10. Motor vehicles have become the most prevalent source of emissions and subsequently air pollution within Chinese cities. Understanding the impacts that different control measures have on vehicular emissions is very important in order to be able to control vehicle emissions. The results of this study will be very helpful for the further control of vehicle emissions in Guangzhou in the future. In addition, the effects of temporary transportation control measures will provide

Acoustic energy propagation around railways

Science.gov (United States)

Cizkova, Petra

2017-09-01

The article deals with the issues of acoustic energy propagation around railways. The research subject was noise emission spreading into the surroundings during the passage of trains over a directly travelled steel bridge construction. Noise emissions were measured using direct measurements in the field. The measurements were performed in two measurement profiles. The noise exposures A LAE measured near the steel bridge construction were compared against the noise exposures A LAE captured on an open track. From the difference of these data, the noise level of the steel bridge structure was determined. Part of the research was to evaluate the effect of the reconstruction of the railway track superstructure on the acoustic situation in the given section of the railway track. The article describes the methodology of measurements, including the processing and evaluation of measured data. The article points out the noise levels of the steel bridge construction and assesses changes in the acoustic situation after the reconstruction.

Learning styles: The learning methods of air traffic control students

Science.gov (United States)

Jackson, Dontae L.

In the world of aviation, air traffic controllers are an integral part in the overall level of safety that is provided. With a number of controllers reaching retirement age, the Air Traffic Collegiate Training Initiative (AT-CTI) was created to provide a stronger candidate pool. However, AT-CTI Instructors have found that a number of AT-CTI students are unable to memorize types of aircraft effectively. This study focused on the basic learning styles (auditory, visual, and kinesthetic) of students and created a teaching method to try to increase memorization in AT-CTI students. The participants were asked to take a questionnaire to determine their learning style. Upon knowing their learning styles, participants attended two classroom sessions. The participants were given a presentation in the first class, and divided into a control and experimental group for the second class. The control group was given the same presentation from the first classroom session while the experimental group had a group discussion and utilized Middle Tennessee State University's Air Traffic Control simulator to learn the aircraft types. Participants took a quiz and filled out a survey, which tested the new teaching method. An appropriate statistical analysis was applied to determine if there was a significant difference between the control and experimental groups. The results showed that even though the participants felt that the method increased their learning, there was no significant difference between the two groups.

Routing trains through railway junctions: A new set-packing approach

DEFF Research Database (Denmark)

Lusby, Richard Martin; Larsen, Jesper; Ryan, David

2011-01-01

The problem of routing trains through railway junctions is an integral part of railway operations. Large junctions are highly interconnected networks of track where multiple railway lines merge, intersect, and split. The number of possible routings makes this a very complicated problem. We show h...

THE RAILWAYS THE

African Journals Online (AJOL)

Sout'h Africa's armed forces were small, and their material resources ... scheme, contingency planning proceeded. On the outbreak of ... hannesburg); a Railway Operating Company; a Mechanical .... ded his verdict that from the points of view.

Salmonella outbreak among railway and airline passengers.

Science.gov (United States)

Hatakka, M

1992-01-01

A widespread outbreak by Salmonella infantis, infecting a total of 226 people, occurred in Finland at the beginning of August 1986. Of those infected, 107 were railway passengers, 91 were airline passengers and 28 were employed in a food processing establishment. The outbreak among the railway passengers was caused by egg sandwiches, the airline passengers were infected by a meal served on board and the catering employees by the breakfast served in the establishment. The outbreak was caused by food prepared in the establishment's kitchen. The employees' breakfasts had probably been contaminated by an employee who was a symptom-free Salmonella infantis carrier, and a number of the employees subsequently became infected, leading to widespread contamination of the food prepared in the establishment. The spread of the outbreak was further influenced by a heatwave at the time and by shortcomings in the cold storage facilities. The kitchen's hygiene supervision and the quality control of its output were reorganized after the outbreak.

Discrete events simulation of a route with traffic lights through automated control in real time

Directory of Open Access Journals (Sweden)

Rodrigo César Teixeira Baptista

2013-03-01

Full Text Available This paper presents the integration and communication in real-time of a discrete event simulation model with an automatic control system. The simulation model of an intersection with roads having traffic lights was built in the Arena environment. The integration and communication have been made via network, and the control system was operated by a programmable logic controller. Scenarios were simulated for the free, regular and congested traffic situations. The results showed the average number of vehicles that entered in the system and that were retained and also the total average time of the crossing of the vehicles on the road. In general, the model allowed evaluating the behavior of the traffic in each of the ways and the commands from the controller to activation and deactivation of the traffic lights.

A tutorial on fundamental model structures for railway timetable optimization

DEFF Research Database (Denmark)

Harrod, Steven

2012-01-01

This guide explains the role of railway timetables relative to all other railway scheduling activities, and then presents four fundamental timetable formulations suitable for optimization. Timetabling models may be classified according to whether they explicitly model the track structure, and whe......This guide explains the role of railway timetables relative to all other railway scheduling activities, and then presents four fundamental timetable formulations suitable for optimization. Timetabling models may be classified according to whether they explicitly model the track structure...

Reliability analysis of maintenance operations for railway tracks

International Nuclear Information System (INIS)

Rhayma, N.; Bressolette, Ph.; Breul, P.; Fogli, M.; Saussine, G.

2013-01-01

Railway engineering is confronted with problems due to degradation of the railway network that requires important and costly maintenance work. However, because of the lack of knowledge on the geometrical and mechanical parameters of the track, it is difficult to optimize the maintenance management. In this context, this paper presents a new methodology to analyze the behavior of railway tracks. It combines new diagnostic devices which permit to obtain an important amount of data and thus to make statistics on the geometric and mechanical parameters and a non-intrusive stochastic approach which can be coupled with any mechanical model. Numerical results show the possibilities of this methodology for reliability analysis of different maintenance operations. In the future this approach will give important informations to railway managers to optimize maintenance operations using a reliability analysis

Effects of Automation Types on Air Traffic Controller Situation Awareness and Performance

Science.gov (United States)

Sethumadhavan, A.

2009-01-01

The Joint Planning and Development Office has proposed the introduction of automated systems to help air traffic controllers handle the increasing volume of air traffic in the next two decades (JPDO, 2007). Because fully automated systems leave operators out of the decision-making loop (e.g., Billings, 1991), it is important to determine the right level and type of automation that will keep air traffic controllers in the loop. This study examined the differences in the situation awareness (SA) and collision detection performance of individuals when they worked with information acquisition, information analysis, decision and action selection and action implementation automation to control air traffic (Parasuraman, Sheridan, & Wickens, 2000). When the automation was unreliable, the time taken to detect an upcoming collision was significantly longer for all the automation types compared with the information acquisition automation. This poor performance following automation failure was mediated by SA, with lower SA yielding poor performance. Thus, the costs associated with automation failure are greater when automation is applied to higher order stages of information processing. Results have practical implications for automation design and development of SA training programs.

Cognitive Task Analysis of Prioritization in Air Traffic Control.

Science.gov (United States)

Redding, Richard E.; And Others

A cognitive task analysis was performed to analyze the key cognitive components of the en route air traffic controllers' jobs. The goals were to ascertain expert mental models and decision-making strategies and to identify important differences in controller knowledge, skills, and mental models as a function of expertise. Four groups of…

75 FR 74128 - Manual on Uniform Traffic Control Devices (MUTCD) Compliance Dates

Science.gov (United States)

2010-11-30

... existing non-compliant devices based on what it believes to be a reasonable balance of the safety benefits... public works agencies, that State and local governments must balance with highway safety and traffic... service life of sign sheeting materials. \\7\\ D. Ripley. Quantifying the Safety Benefits of Traffic Control...

Air Traffic Control: Observations on FAA's Air Traffic Control Modernization Program

National Research Council Canada - National Science Library

1999-01-01

In 1981, FAA began a multibillion-dollar modernization effort to improve the safety, capacity, and efficiency of this system to meet the increasing demand for air traffic services and to replace aging equipment...

Air pollution of railways in urban areas. [Denmark]; Luftforurening fra togdrift i byomraeder

Energy Technology Data Exchange (ETDEWEB)

Roerdam Olesen, H.; Ellermann, T.; Winther, M.; Schmidt Plejdrup, M.; Brandt, J. [Aarhus Univ.. Institut for Miljoevidenskab, Roskilde (Denmark)

2013-05-01

The present report describes the results of a project on the air pollution impact of railways in the towns of Copenhagen and Aarhus. The project has comprised three activities. 1) Emission inventory. Detailed information about the activity of diesel fuelled trains in Copenhagen and Aarhus has been acquired. Based on this information emissions of NO{sub X} and PM{sub 2.5} (particles with a diameter of less than 2.5 micron) have been computed for railways and stations. 2) Computations of concentrations. The above mentioned emission data have provided a base for computation of concentrations of air pollutants close to railways and at further distances from them. 3) Indicative measurements. A number of indicative measurements of NO{sub 2} (nitrogen dioxide) have been carried out at a few selected locations - some with an assumed large exposure to road traffic and trains, and others with assumed exposure from trains only. These indicative measurements have been limited in various respects. The focus of the entire work was to obtain an overall assessment, where results are expressed in terms of annual mean values. Features at a scale of less than 100 meters have not been described in the emission inventories, neither in the majority of the dispersion model calculations. Assessments for particle pollution involve only direct emissions of particles as PM{sub 2.5}, whereas resuspension of dust and wear from brakes and rails has been disregarded. Neither has the number of ultrafine particles been considered. The environmental significance of railway service in the two towns can be summarized as: 1) On a national level trains account for 2 % of NO{sub X} emission and 0.3 % of PM{sub 2.5} emission. 2) In the Copenhagen area (defined as a circle with radius 5 km and centre at Copenhagen Central Station) trains account for 3 % on NO{sub X} emission and 0.6 % of PM{sub 2.5} emission. 3) In the Aarhus area (a similar circle around Aarhus Central Station) trains account for 2 % on

Traffic Control Models Based on Cellular Automata for At-Grade Intersections in Autonomous Vehicle Environment

OpenAIRE

Wei Wu; Yang Liu; Yue Xu; Quanlun Wei; Yi Zhang

2017-01-01

Autonomous vehicle is able to facilitate road safety and traffic efficiency and has become a promising trend of future development. With a focus on highways, existing literatures studied the feasibility of autonomous vehicle in continuous traffic flows and the controllability of cooperative driving. However, rare efforts have been made to investigate the traffic control strategies in autonomous vehicle environment on urban roads, especially in urban intersections. In autonomous vehicle enviro...

The Study of Reinforcement Learning for Traffic Self-Adaptive Control under Multiagent Markov Game Environment

Directory of Open Access Journals (Sweden)

Lun-Hui Xu

2013-01-01

Full Text Available Urban traffic self-adaptive control problem is dynamic and uncertain, so the states of traffic environment are hard to be observed. Efficient agent which controls a single intersection can be discovered automatically via multiagent reinforcement learning. However, in the majority of the previous works on this approach, each agent needed perfect observed information when interacting with the environment and learned individually with less efficient coordination. This study casts traffic self-adaptive control as a multiagent Markov game problem. The design employs traffic signal control agent (TSCA for each signalized intersection that coordinates with neighboring TSCAs. A mathematical model for TSCAs’ interaction is built based on nonzero-sum markov game which has been applied to let TSCAs learn how to cooperate. A multiagent Markov game reinforcement learning approach is constructed on the basis of single-agent Q-learning. This method lets each TSCA learn to update its Q-values under the joint actions and imperfect information. The convergence of the proposed algorithm is analyzed theoretically. The simulation results show that the proposed method is convergent and effective in realistic traffic self-adaptive control setting.

Traffic Responsive Control of Intersections with Predicted Arrival Times: A Markovian Approach

NARCIS (Netherlands)

Haijema, R.; Hendrix, E.M.T.

2014-01-01

The dynamic adaptive control of traffic lights can be formulated as a Markov decision problem (MDP). This framework is hardly used, as solving an MDP can be very time-consuming and is only possible for simple infrastructures with a small number of traffic flows. Nevertheless, we show that the MDP

Automated mixed traffic transit vehicle microprocessor controller

Science.gov (United States)

Marks, R. A.; Cassell, P.; Johnston, A. R.

1981-01-01

An improved Automated Mixed Traffic Vehicle (AMTV) speed control system employing a microprocessor and transistor chopper motor current controller is described and its performance is presented in terms of velocity versus time curves. The on board computer hardware and software systems are described as is the software development system. All of the programming used in this controller was implemented using FORTRAN. This microprocessor controller made possible a number of safety features and improved the comfort associated with starting and shopping. In addition, most of the vehicle's performance characteristics can be altered by simple program parameter changes. A failure analysis of the microprocessor controller was generated and the results are included. Flow diagrams for the speed control algorithms and complete FORTRAN code listings are also included.

Integrity Evaluation of Railway Bogie Using Infrared Thermography Technique

International Nuclear Information System (INIS)

Kim, Jeong Guk

2011-01-01

The lock-in thermography was employed to evaluate the integrity of railway bogies. Prior to the actual application on railway bogies, in order to assess the detectability of known flaws, the calibration reference panel was prepared with various dimensions of artificial flaws. The panel was composed of structural steel, which was the same material with actual bogies. Through lock-in thermography evaluation, the optimal frequency of heat source was determined for the best flaw detection. Based on the defects information, the actual defect assessments on railway bogie were conducted with different types of railway bogies, which were used for the current operation. In summary, the defect assessment results with thermography method showed a good agreement as compared with the conventional inspection techniques. Moreover, it was found that the novel infrared thermography technique could be an effective way for the inspection and the detection of surface defects on bogies since the infrared thermography method provided rapid and non-contact mode for the investigation of railway bogies

Innovative Railway Stations

Science.gov (United States)

Rzepnicka, Sylwia; Załuski, Daniel

2017-10-01

In relation to modern demographic trends, evolving technologies and environment-friendly solutions increases the potential of rail considered as sustainable form of public transport. Contemporary tendencies of designing railway stations in Europe are focused on lowering energy consumption and reducing carbon emission. The main goal of the designers is to create a friendly and intuitive space for its users and at the same time a building that uses renewable energy sources and minimizes negative impact on the environment by the increase of biologically active areas, reuse of rainwater and greywater, innovative heating and cooling solutions and reduction of energy losses. The optimisation of a life circle in railway architecture introduces new approach to passenger service. Examples mentioned in the content of this article help to synthesize changes in approach to the design within the context of sustainability.

Dimensions of Air Traffic Control Tower Information Needs: From Information Requests to Display Design

Science.gov (United States)

Durso, Francis T.; Johnson, Brian R.; Crutchfield, Jerry M.

2010-01-01

In an effort to determine the information needs of tower air traffic controllers, instructors from the Federal Aviation Administration's Academy in Oklahoma City were asked to control traffic in a high-fidelity tower cab simulator. Information requests were made apparent by eliminating access to standard tower information sources. Instead,…

Methodology for neural networks prototyping. Application to traffic control

Energy Technology Data Exchange (ETDEWEB)

Belegan, I.C.

1998-07-01

The work described in this report was carried out in the context of the European project ASTORIA (Advanced Simulation Toolbox for Real-World Industrial Application in Passenger Management and Adaptive Control), and concerns the development of an advanced toolbox for complex transportation systems. Our work was focused on the methodology for prototyping a set of neural networks corresponding to specific strategies for traffic control and congestion management. The tool used for prototyping is SNNS (Stuggart Neural Network Simulator), developed at the University of Stuggart, Institute for Parallel and Distributed High Performance Systems, and the real data from the field were provided by ZELT. This report is structured into six parts. The introduction gives some insights about traffic control and its approaches. The second chapter discusses the various control strategies existing. The third chapter is an introduction to the field of neural networks. The data analysis and pre-processing is described in the fourth chapter. In the fifth chapter, the methodology for prototyping the neural networks is presented. Finally, conclusions and further work are presented. (author) 14 refs.

ANALYSIS OF AIR TRAFFIC CONTROL MANAGEMENT AT AIRPORTS WITH LOW FLIGHT INTENSITY IN FOREIGN COUNTRIES

Directory of Open Access Journals (Sweden)

Evgenii E. Nechaev

2017-01-01

Full Text Available This article discusses various options for air traffic management at low flight intensity airports and airports located remotely in the North, where air traffic control service is not necessary.There are some examples of already implemented concepts in foreign countries: such as remote control tower, which allows to control air traffic, being at a considerable distance from the airport. Such a remote control tower is already put into operation at the Örnsköldsvik airport (Sweden. The prospects of this system development in other countries are observed in this article. A remote control tower will also appear in the United States in the nearest future. Also the paper considers the pros and cons of this system and its effect on flight safety.Moreover, there are given the examples of using non-towered and uncontrolled airports, where air traffic control service is not provided. This kind of airports is partly used in the USA and in New Zealand. The article describes flight procedures in the area of uncontrolled airports, including visual flight rules and instrument flight rules.We also analyze the possibilities of remote control towers and uncontrolled airports adaptation in the Russian Federation. It is a very important problem for Russia because most airports do not provide more than 10 movements per day. But air traffic control service exists in all airports.

Soil, crop and emission responses to seasonal-controlled traffic in organic vegetable farming on loam soil

NARCIS (Netherlands)

Vermeulen, G.D.; Mosquera Losada, J.

2009-01-01

Some organic arable and vegetable farms in the Netherlands use cm-precise guidance of machinery to restrict wheel traffic to fixed traffic lanes and to achieve non-trafficked cropping zones with optimized soil structure in between the lanes. Contrary to controlled traffic farming (CTF) the traffic

Monitoring of railway bridges in Japan

Science.gov (United States)

Abe, Makoto; Komon, Kazuki; Narumoto, Asao; Sugidate, Masao; Mori, Takeshi; Miki, Chitoshi

2000-06-01

In Japan, some monitoring systems have been introduced to evaluate conditions of the railway structures. In this work, we introduce the monitoring systems of railway bridges. Here, for example, we show the abstraction of fatigue damage monitoring system. The crack propagation properties of a side notched SUS304 thin sheet, which is affixed to a fatigue test specimen, is studied to develop a fatigue damage monitoring sensor. When cyclic loads are applied to the fatigue specimen, the side notched thin sheet behaves as a displacement controlled condition. The stress intensity factor (Delta) K is expressed by the following equation; (Delta) K equals (Delta) (sigma) (root)GL/2 where GL is the gauge length of the thin sheet. The thin sheet is fatigue pre-cracked, stress- relieved and affixed to a specimen. The results of fatigue crack propagation tests show that the crack propagation rate is dependent on stress range and gauge length, but not on crack length. Under sufficient mean stress conditions, the fatigue crack propagation rate is well expressed by a power low of (Delta) K even at such a low stress range as 20 MPa. Fatigue damage accumulated during a monitoring period can be estimated from crack propagation during the period. The sensitivity of the sensor is controlled through the gauge length of the sensor.

78 FR 2482 - Carload Express, Inc.-Continuance in Control Exemption-Ohio Terminal Railway Company

Science.gov (United States)

2013-01-11

... exemption in Ohio Terminal Railway Company--Operation Exemption-- Hannibal Real Estate, LLC, Docket No. FD..., from milepost 60.5 at or near Powhatan Point, to milepost 72.7 at or near Hannibal, in Monroe County...

Traffic Management by Using Admission Control Methods in Multiple Node IMS Network