WorldWideScience

Sample records for radium bearing material

  1. Radium bearing waste disposal

    International Nuclear Information System (INIS)

    Tope, W.G.; Nixon, D.A.; Smith, M.L.; Stone, T.J.; Vogel, R.A.; Schofield, W.D.

    1995-01-01

    Fernald radium bearing ore residue waste, stored within Silos 1 and 2 (K-65) and Silo 3, will be vitrified for disposal at the Nevada Test Site (NTS). A comprehensive, parametric evaluation of waste form, packaging, and transportation alternatives was completed to identify the most cost-effective approach. The impacts of waste loading, waste form, regulatory requirements, NTS waste acceptance criteria, as-low-as-reasonably-achievable principles, and material handling costs were factored into the recommended approach

  2. Interagency cooperation in the development of a cost-effective transportation and disposal solution for vitrified radium bearing material

    International Nuclear Information System (INIS)

    Smith, M.L.; Nixon, D.A.; Stone, T.J.; Tope, W.G.; Vogel, R.A.; Allen, R.B.; Schofield, W.D.

    1996-01-01

    Fernald radium bearing ore residue waste, stored within Silos 1 and 2 (K-65) and Silo 3 waste, will be vitrified for disposal at the Nevada Test Site (NTS). A comprehensive, parametric evaluation of waste form, shielding requirements, packaging, and transportation alternatives was completed to identify the safest, most cost-effective approach. The impacts of waste loading, waste form, regulatory requirements, NTS waste acceptance criteria, as-low-as-resonably-achievable principles, and material handling costs were factored into the recommended approach. Through cooperative work between the U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT), the vitrified K-65 and Silo 3 radioactive material will be classified consistent with the regulations promulgated by DOT in the September 28, 1995 Federal Register. These new regulations adopt International Atomic Energy Agency language to promote a consistent approach for the transportation and management of radioactive material between the international community and the DOT. Use of the new regulations allows classification of the vitrified radioactive material from the Fernald silos under the designation of low specific activity-II and allows the development of a container that is optimized to maximize payload while minimizing internal void space, external surface radiation levels, and external volume. This approach minimizes the required number of containers and shipments, and the related transportation and disposal costs

  3. Interagency cooperation in the development of a cost-effective transportation and disposal solution for vitrified radium bearing material

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.L.; Nixon, D.A.; Stone, T.J.; Tope, W.G.; Vogel, R.A. [Fernald Environmental Restoration Management Corp., Cincinnati, OH (United States); Allen, R.B. [USDOE, Fernald Area Office, Cincinnati, OH (United States); Schofield, W.D. [Foster Wheeler Environmental Corp. (United States)

    1996-02-01

    Fernald radium bearing ore residue waste, stored within Silos 1 and 2 (K-65) and Silo 3 waste, will be vitrified for disposal at the Nevada Test Site (NTS). A comprehensive, parametric evaluation of waste form, shielding requirements, packaging, and transportation alternatives was completed to identify the safest, most cost-effective approach. The impacts of waste loading, waste form, regulatory requirements, NTS waste acceptance criteria, as-low-as-resonably-achievable principles, and material handling costs were factored into the recommended approach. Through cooperative work between the U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT), the vitrified K-65 and Silo 3 radioactive material will be classified consistent with the regulations promulgated by DOT in the September 28, 1995 Federal Register. These new regulations adopt International Atomic Energy Agency language to promote a consistent approach for the transportation and management of radioactive material between the international community and the DOT. Use of the new regulations allows classification of the vitrified radioactive material from the Fernald silos under the designation of low specific activity-II and allows the development of a container that is optimized to maximize payload while minimizing internal void space, external surface radiation levels, and external volume. This approach minimizes the required number of containers and shipments, and the related transportation and disposal costs.

  4. Radium Adsorption to Iron Bearing Minerals in Variable Salinity Waters

    Science.gov (United States)

    Chen, M.; Kocar, B. D.

    2014-12-01

    Radium is a common, naturally occurring radioactive metal found in many subsurface environments. Radium isotopes are a product of natural uranium and thorium decay, and are particularly abundant within groundwaters where minimal flux leads to accumulation within porewaters. Radium has been used as a natural tracer to estimate submarine groundwater discharge (SGD) [1], where the ratios of various radium isotopes are used to estimate total groundwater flux to and from the ocean [2]. Further, it represents a substantial hazard in waste water produced after hydraulic fracturing for natural gas extraction [3], resulting in a significant risk of environmental release and increased cost for water treatment or disposal. Adsorption to mineral surfaces represents a primary pathway of radium retention within subsurface environments. For SGD studies, it is important to understand adsorption processes to correctly estimate GW fluxes, while in hydraulic fracturing, radium adsorption to aquifer solids will mediate the activities of radium within produced water. While some studies of radium adsorption to various minerals have been performed [4], there is a limited understanding of the surface chemistry of radium adsorption, particularly to iron-bearing minerals such as pyrite, goethite and ferrihydrite. Accordingly, we present the results of sorption experiments of radium to a suite of iron-bearing minerals representative of those found within deep saline and near-surface (freshwater) aquifers, and evaluate impacts of varying salinity solutions through the use of artificial groundwater, seawater, and shale formation brine. Further, we explore the impacts of pyrite oxidation and ferrihydrite transformation to other iron-bearing secondary minerals on the retention of radium. This work lays the groundwork for further study of radium use as a tracer for SGD, as well as understanding mechanisms of radium retention and release from deep aquifer materials following hydraulic fracturing

  5. Radium-bearing waters in the Upper Silesian Coal Basin

    International Nuclear Information System (INIS)

    Tomza, I.; Lebecka, J.; Pluta, I.

    1986-01-01

    Natural waters with a high radium content occuring in underground workings of coal mines in Upper Silesia are described. Above 1500 water samples from carbonifereous aquifers were taken and the concentration of 226 Ra was measured. In about 100 samples also uranium was determined. The 226 Ra concentration varied in a wide range from 0.01 kBq/m 3 to 270 kBq/m 3 , while the uranium content was usually much lower than one could expect from the equilibrium between radium and uranium. It was observed that the 226 Ra concentration increases with mineralization of water, however the correlation was rather poor. Two types of radium-bearing waters were distinguished. Waters type A - containing Ba 2+ ions and waters type B - containing SO 4 2- ions. Waters type A are always reach in radium and usually have higher concentration of 226 Ra than waters type B. The described waters have one of the highest radium concentration which have been found so far in the natural environment. (author)

  6. Barium and radium migration in unconsolidated Canadian geological materials

    International Nuclear Information System (INIS)

    Gillham, R.W.; Sharma, H.D.; Reddy, M.R.; Cooper, E.L.; Cherry, J.A.

    1981-05-01

    This report describes the results of laboratory studies on the distribution coefficients of radium and barium in samples of unconsolidated geologic materials. Graphs of Ksub(d) versus solution concentration for the respective elements showed constant Ksub(d) values in the low concentration range suggesting that, at low concentrations, a distribution coefficient is a valid means of representing the geochemical reactions of both barium and radium. The Ksub(d) values for barium range between 60 and 3500 ml/g. The values appear to be influenced by the amount of barium occurring naturally in the soil materials and thus there is little possiblility of using barium as an analog of radium in laboratory experiments. The Ksub(d) values of radium vary from 50 to 1000 ml/g indicating that a wide range of geological materials have a substantial capacity to retard the migration of radium

  7. Contamination of settling ponds and rivers as a result of discharge of radium-bearing waters from Polish coal mines.

    Science.gov (United States)

    Chalupnik, S; Michalik, B; Wysocka, M; Skubacz, K; Mielnikow, A

    2001-01-01

    Saline waters from underground coal mines in Poland often contain natural radioactive isotopes, mainly 226Ra from the uranium decay series and 228Ra from the thorium series. Approximately 40% of the total amount of radium remains underground as radioactive deposits, but 225 MBq of 226Ra and 400 MBq of 228Ra are released daily into the rivers along with the other mine effluents from all Polish coal mines. Technical measures such as inducing the precipitation of radium in gobs, decreasing the amount of meteoric inflow water into underground workings, etc. have been undertaken in several coal mines, and as a result of these measures, the total amount of radium released to the surface waters has diminished by about 60% during the last 5-6 years. Mine water can have a severe impact on the natural environment, mainly due to its salinity. However, associated high levels of radium concentration in river waters, bottom sediments and vegetation have also been observed. Sometimes radium concentrations in rivers exceed 0.7 kBq/m3, which is the permitted level for waste waters under Polish law. The extensive investigations described here were carried out for all coal mines and on this basis the total radium balance in the effluents has been calculated. Measurements in the vicinity of mine settling ponds and in rivers have given us an opportunity to study radium behaviour in river waters and to assess the degree of contamination. Solid waste materials with enhanced natural radioactivity have been produced in huge amounts in the power and coal industries in Poland. As a result of the combustion of coal in power plants, low-radioactive waste materials are produced, with 226Ra concentration seldom exceeding a few hundreds of Bq/kg. A different situation is observed in coal mines, where, as a result of precipitation of radium from radium-bearing waters, highly radioactive deposits are formed. Sometimes the radioactivity of such materials is extremely high; precipitates from coal

  8. Radium

    International Nuclear Information System (INIS)

    Cerskov-Klika, Midana; Lokner, Vladimir

    1999-01-01

    This paper describes the problem of control and/or storage of radiation sources used in hospitals in Croatia. The administration organization of the country, now being established; work on the new legislation, and the regulatory framework for protection against radiation, combined with a desire to achieve the systematic and safe storage of all existing radioactive waste, until the construction of a disposal site for low- and medium - level radiation waste, have all contributed to the decision whereby all radiation sources in Croatia are to be located and made safe. Accordingly, it was agreed that a commission, involving Croatian Health Ministry, the Hazardous Waste Management Agency, the Institute for Medical Research, and the Ruder Boskovic Institute, should organize the search, collection and conditioning of all radium sources which have been used in medical establishments throughout Croatia. The subsequent investigation revealed that almost half of all radium sources are located in an old storage facility at the Institute for Medical Research. Those sources, as well as others located in hospitals following months of investigation, have now been collected together in one place - the Ruder Boskovic Institute. Following a process of identification, and entry in a relevant data base, all sources were subject to a conditioning procedure. They were placed in stainless-steel capsules, each capsule containing approximately 50 milli curries of radium. The capsules are scaled with a lid, welded in a place using a special procedure, which totally isolates the contents from the environment. Neither radium nor its products are able to escape from the capsule. Then, the capsules, in groups of ten, are placed in a massive lead container, which prevents leakage of radiation resulting from disintegration. The lead container is placed inside a stainless-steel barrel filled with concrete. In this way, the radium sources no longer pose any threat to the environment. Due to its long

  9. Distribution of radon and radium in the ocean and its bearing on some oceanographic problems

    International Nuclear Information System (INIS)

    Miyake, Y.; Sugimura, Y.; Saruhashi, K.

    1980-01-01

    Radon and radium contents in seawater near the ocean floor and in the surface layer of the ocean were studied. The results showed a fairly large amount of excess of radon over radium (1520 to 315%) near the ocean floor. The vertical eddy-diffusion coefficient, D, near the seabed was calculated from a vertical distribution of the excess amount of radon. In the surface layer of the ocean, a remarkable deficiency of radon with respect to radium (50 to 70%) was observed. The mass balance of radium in the mixed layer was considered using a box model. The results showed that the residence time of radon in the mixed layer was about 8 days

  10. Preparation and multi-properties determination of radium-containing rocklike material

    Science.gov (United States)

    Hong, Changshou; Li, Xiangyang; Zhao, Guoyan; Jiang, Fuliang; Li, Ming; Zhang, Shuai; Wang, Hong; Liu, Kaixuan

    2018-02-01

    The radium-containing rocklike material were fabricated using distilled water, ordinary Portland cement and additives mixed aggregates and admixtures according to certain proportion. The physico-mechanical properties as well as radioactive properties of the prepared rocklike material were measured. Moreover, the properties of typical granite sample were also investigated. It is found on one hand, similarities exist in physical and mechanical properties between the rocklike material and the granite sample, this confirms the validity of the proposed method; on the other hand, the rocklike material generally performs more remarkable radioactive properties compared with the granite sample, while radon diffusive properties in both materials are essentially matching. This study will provide a novel way to prepare reliable radium-containing samples for radon study of underground uranium mine.

  11. Determining Radium-226 concentration from Radon-222 emanation in building materials: a theoretical model

    International Nuclear Information System (INIS)

    Barreto, Rafael C.; Perna, Allan F.N.; Narloch, Danielle C.; Del Claro, Flavia; Correa, Janine N.; Paschuk, Sergei A.

    2017-01-01

    It was developed an improved theoretical model capable to estimate the radium concentration in building materials solely measuring the radon-222 concentration in a con ned atmosphere. This non-destructive technique is not limited by the size of the samples, and it intrinsically includes back diffusion. The resulting equation provides the exact solution for the concentration of radon-222 as a function of time and distance in one dimension. The effective concentration of radium-226 is a fit parameter of this equation. In order to reduce its complexity, this equation was simplified considering two cases: low diffusion in the building material compared to the air, and a building material initially saturated with radon-222. These simplified versions of the exact one dimension solution were used to t experimental data. Radon-222 concentration was continuously measured for twelve days with an AlphaGUARD TM detector, located at the Laboratory of Applied Nuclear Physics at Universidade Tecnologica Federal do Parana (UTFPR). This model was applied to two different materials: cement mortar and concrete, which results were respectively (15:7 ±8:3) Bq=kg and (10:5±2:4) Bq=kg for the radium-226 effective concentration. This estimation was confronted with the direct measurements of radium in the same materials (same sources) using gamma-ray spectrometry, fulfilled at Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), which results were respectively (13:81±0:23) Bq=kg and (12:61±0:22) Bq=kg. (author)

  12. Determining Radium-226 concentration from Radon-222 emanation in building materials: a theoretical model

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, Rafael C.; Perna, Allan F.N.; Narloch, Danielle C.; Del Claro, Flavia; Correa, Janine N.; Paschuk, Sergei A., E-mail: baarreth@gmail.com, E-mail: allan_perna@hotmail.com, E-mail: daninarloch@hotmail.com, E-mail: aviadelclaro@gmail.com, E-mail: janine_nicolosi@hotmail.com, E-mail: spaschuk@gmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil). Departamento Academico de Fisica e Departamento Academico de Construcao Civil

    2017-07-01

    It was developed an improved theoretical model capable to estimate the radium concentration in building materials solely measuring the radon-222 concentration in a con ned atmosphere. This non-destructive technique is not limited by the size of the samples, and it intrinsically includes back diffusion. The resulting equation provides the exact solution for the concentration of radon-222 as a function of time and distance in one dimension. The effective concentration of radium-226 is a fit parameter of this equation. In order to reduce its complexity, this equation was simplified considering two cases: low diffusion in the building material compared to the air, and a building material initially saturated with radon-222. These simplified versions of the exact one dimension solution were used to t experimental data. Radon-222 concentration was continuously measured for twelve days with an AlphaGUARD{sup TM} detector, located at the Laboratory of Applied Nuclear Physics at Universidade Tecnologica Federal do Parana (UTFPR). This model was applied to two different materials: cement mortar and concrete, which results were respectively (15:7 ±8:3) Bq=kg and (10:5±2:4) Bq=kg for the radium-226 effective concentration. This estimation was confronted with the direct measurements of radium in the same materials (same sources) using gamma-ray spectrometry, fulfilled at Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), which results were respectively (13:81±0:23) Bq=kg and (12:61±0:22) Bq=kg. (author)

  13. Remedial measures in Czech houses with high radium content in building material

    International Nuclear Information System (INIS)

    Hulka, J.; Thomas, J.

    1999-01-01

    Three groups of houses built from materials having elevated natural radioactivity content were found in the Czech republic. These are: 1) about hundred old houses in Jachymov (Joachimstal) in Northern Bohemia, where residues from factory producing uranium paints were used as plaster and mortar before the World War II (radium concentration up to 1 MBq/kg, indoor gamma dose rate up to 10-100 μGy/h); 2) some 20 000 family houses built from highly emanating aerated concrete with radium content 500-1000 Bq/kg (produced from flying ash) in the period 1963-1980; 3) more than 2000 family houses from slag concrete of radium content about 3 kBq/kg in average (indoor gamma dose rate up to 2 μGy/h) made in the period 1972-83. Remedy measures were undertaken with state financial support. Intervention levels were laid down 200 Bq/m 3 for EEC (equivalent equilibrium radon concentration - it is equivalent to radon gas concentration 500 Bq/m 3 ), 2 μGy/h for indoor gamma dose rate. Weighted sum of indoor radon and indoor gamma dose rate was used if the latter was above 0,5 μGy/h. The central heat recovery ventilation units were used largely as the remedy measures. Some houses were demolished, in some houses local contamination of plasters was removed. Other tested measures (removal of the contaminated building material in great amount, gamma shielding, wall coating, etc.) proved to be not effective or not acceptable in practice. (author)

  14. Electron beam melting of bearing materials

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmied, G.; Schuler, A. (Technische Univ., Vienna (Austria). Inst. fuer Allgemeine Elektrotechnik); Elsinger, G.; Koroschetz, F. (MIBA Gleitlager AG, Laakirchen (Austria)); Tschegg, E.K. (Technische Univ., Vienna (Austria). Inst. fuer Angewandte und Technische Physik)

    1990-06-01

    This paper reports on a surface treatment method for the bearing materials AlSn6 which permits the use of this material without the overlay usually required. Microstructural refinement is achieved by means of a surface melting technique using an electron beam with successive rapid solidification. Extremely fine tin precipitates are formed in the melted surface layer which lead to significantly better tribological properties of the bearing material. Tests compared the tribological properties for AlSn6 bearings treated by the surface melting technique with those of untreated bearings. Whereas all untreated bearings failed by seizure after only 2 h of testing, 30% of the tested bearings which had been surface melted survived the entire testing program without damage.

  15. Recycling radium

    International Nuclear Information System (INIS)

    Blair, J.A.

    1997-01-01

    The Technology Programs Department of Fluor Daniel Fernald investigated alternatives for dealing with the World's largest concentrated supply of radium, the K-65 silos at Fernald, the United States Department of Energy's (DOE) former uranium processing facility near Cincinnati, Ohio. These two silos contain nearly 3,770 curies (by definition 3,770 grams) primarily of Ra-226 (T 1/2 = 1600 a) within 10,000 metric tons of material. Material contents of the silos were to be vitrified according to a Record of Decision (ROD) between the DOE and the United States Environmental Protection Agency (EPA). Because of cost considerations, that alternative must be reconsidered. Research showed that although Ra-226 had come mostly into disfavor as a therapeutic agent for cancer, isotopes derived from the neutron bombardment of pure Ra-226 and radioactive decay of the resulting purified isotopes could be used to good effect. One of these isotopes, bismuth-213 (Bi-213, T 1/2 = 45.6 m), is being used in clinical trials against acute myelogenous leukemia. The isotope is attached to an antibody that seeks out cancer cells. Because alpha particles dissipate most of their energy within the space of one or a few cells, virtually all the surrounding healthy tissue remains unharmed. Because of the short half life, waste disposal is no problem. Because of past policies, radium for feedstock is difficult to find. A new policy is needed in the United States acknowledging radium's value for feedstock while continuing to control its health and environmental consequences

  16. Radium equivalent activity of building materials and gamma ray dose rates in ordinary houses of Sao Paulo, Brazil

    International Nuclear Information System (INIS)

    Campos, M.P.; Pecequilo, B.R.S.

    1994-01-01

    The external radiation exposure from natural radioactivity represents, approximately, 50% of the average annual dose caused to the human body by all natural and artificial radiation sources. Natural radioactivity in building materials is the most important source of external radiation exposure in dwellings because of the gamma rays emitted from potassium 40 and member of the uranium 238 and thorium 232 decay chains. Concrete is one of the most potential sources of elevated radiation exposure, however, little is known about the natural radioactivity of Brazilian construction materials. A study to predict the exposure rates of several ordinary houses built almost of concrete, consisting of 38 samples of 6 different materials was conducted by using high resolution gamma-ray spectrometry. The radium equivalent activity was calculated for all 38 samples in order to compare the specific activities of the construction materials containing different amounts of radium, thorium, and potassium. The effective dose rate due to the indoor gamma radiation from the building materials was performed following the 1988 UNSCEAR procedures

  17. The environmental behaviour of radium

    International Nuclear Information System (INIS)

    Sheppard, M.I.

    1980-09-01

    Radium-226 and its daughter, radon-222, an inert gas, are important members of the uranium decay series as far as human exposure is concerned. Radon diffuses from rocks, soil and water into the atmosphere, and its daughter products polonium-218 and polonium-214 can be retained in the lungs. Radium and radon are contained in emissions from fossil fuel plants, fertilizers, natural gas, building materials and uranium ore. To assess the impact of man's use, intentional or not, of radium and its daughters, we must know their physical, chemical and biological behaviour. This report examines the literature pertinent to the natural levels of radium found in rock, soil, water and plants. Information concerning radium is integrated from several disciplines. The radiological properties and chemistry of radium, and radium-soil interactions are discussed as well as the soil distribution coefficient and the mode of soil transport of radium. Plant transfer coefficients for radium and methods of analysis and measurement are given. A list of topics requiring further research concludes the report. (auth)

  18. Do pyrotechnics contain radium?

    Energy Technology Data Exchange (ETDEWEB)

    Steinhauser, Georg; Musilek, Andreas, E-mail: georg.steinhauser@ati.ac.a [Vienna University of Technology, Atominstitut der Oesterreichischen Universitaeten, Stadionallee 2, A-1020 Wien (Austria)

    2009-07-15

    Many pyrotechnic devices contain barium nitrate which is used as an oxidizer and colouring agent primarily for green-coloured fireworks. Similarly, strontium nitrate is used for red-coloured pyrotechnic effects. Due to their chemical similarities to radium, barium and strontium ores can accumulate radium, causing a remarkable activity in these minerals. Radium in such contaminated raw materials can be processed together with the barium or strontium, unless extensive purification of the ores was undertaken. For example, the utilization of 'radiobarite' for the production of pyrotechnic ingredients can therefore cause atmospheric pollution with radium aerosols when the firework is displayed, resulting in negative health effects upon inhalation of these aerosols. In this study, we investigated the occurrence of gamma-photon-emitting radionuclides in several pyrotechnic devices. The highest specific activities were due to K-40 (up to 20 Bq g{sup -1}, average value 14 Bq g{sup -1}). Radium-226 activities were in the range of 16-260 mBq g{sup -1} (average value 81 mBq g{sup -1}). Since no uranium was found in any of the samples, indeed, a slight enrichment of Ra-226 in coloured pyrotechnics can be observed. Radioactive impurities stemming from the Th-232 decay chain were found in many samples as well. In the course of novel developments aiming at the 'greening' of pyrotechnics, the potential radioactive hazard should be considered as well.

  19. Do pyrotechnics contain radium?

    International Nuclear Information System (INIS)

    Steinhauser, Georg; Musilek, Andreas

    2009-01-01

    Many pyrotechnic devices contain barium nitrate which is used as an oxidizer and colouring agent primarily for green-coloured fireworks. Similarly, strontium nitrate is used for red-coloured pyrotechnic effects. Due to their chemical similarities to radium, barium and strontium ores can accumulate radium, causing a remarkable activity in these minerals. Radium in such contaminated raw materials can be processed together with the barium or strontium, unless extensive purification of the ores was undertaken. For example, the utilization of 'radiobarite' for the production of pyrotechnic ingredients can therefore cause atmospheric pollution with radium aerosols when the firework is displayed, resulting in negative health effects upon inhalation of these aerosols. In this study, we investigated the occurrence of gamma-photon-emitting radionuclides in several pyrotechnic devices. The highest specific activities were due to K-40 (up to 20 Bq g -1 , average value 14 Bq g -1 ). Radium-226 activities were in the range of 16-260 mBq g -1 (average value 81 mBq g -1 ). Since no uranium was found in any of the samples, indeed, a slight enrichment of Ra-226 in coloured pyrotechnics can be observed. Radioactive impurities stemming from the Th-232 decay chain were found in many samples as well. In the course of novel developments aiming at the 'greening' of pyrotechnics, the potential radioactive hazard should be considered as well.

  20. Behaviour of radium isotopes released with brines and sediments from coal mines in Poland

    International Nuclear Information System (INIS)

    Wysocka, M.; Chalupnik, S.; Mielnikow, A.; Lebecka, J.; Skubacz, K.

    1998-01-01

    Saline waters occurring in underground coal mines in Poland often contain natural radioactive isotopes, mainly 226 Ra from uranium series and 228 Ra from thorium series. Approximately 40% of total amount of radium remains underground in a form of radioactive deposits, but 225 MBq of 226 Ra and 380 MBq of 228 Ra are released daily to the rivers with mine effluents. Technical measures as spontaneous precipitation of radium in gobs, decreasing of amounts of water inflowing into underground working etc. have been undertaken in several coal mines and in the result total amount of radium released to the surface waters diminished by about 60% during last 5-6 years. Mine waters can cause a severe impact on the natural environment. The enhancement of radium concentration in river waters, bottom sediments and vegetation is observed. Sometimes radium concentration in rivers exceeds 0.7 kBq/m 3 , which is due to Polish law a permissible level for liquid radioactive waste. It was necessary to undertake investigations for development the methods of the purification of mine waters from radium. The radium balance in effluents has been calculated and a map of radioactive contamination of river waters have been prepared. Solid wastes with enhanced natural radioactivity have been produced in huge amounts in energy and coal industries in Poland. There are two main sources of these waste products. As a result of combustion of coal in power plants low radioactive waste materials are produced, with 226 Ra concentration seldom exceeding few hundreds of Bq/kg. Different situation is be observed in coal mines, where as a result of precipitation of radium from radium-bearing waters radioactive deposits are formed. Sometimes natural radioactivity of such materials is very high, in case of scaling from coal mines radium concentration may reach 4x10 5 Bq/kg - similar activity as for 3% uranium ore. Therefore maintenance of solid waste with technologically enhanced natural radioactivity (TENR

  1. Correlation between radon exhalation and radium content in granite samples used as construction material in Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Jarallah, M.I. [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia)]. E-mail: mibrahim@kfupm.edu.sa; Fazal-ur-Rehman [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Musazay, M.S. [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Aksoy, A. [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia)

    2005-11-15

    Measurements of radon exhalation for a total of 205 selected samples of construction materials used in Saudi Arabia were carried out using an active radon gas analyzer with an emanation container. It was found that granite samples were the main source of radon exhalation. The radon exhalation rates per unit area from these granite samples varied from below the minimum detection limit up to 13.1Bqm{sup -2}h{sup -1} with an average of 1.5 +/-1.9(1{sigma})Bqm{sup -2}h{sup -1}. The radium contents of 27 granite samples were measured using an HPGe-based {gamma} spectroscopy setup. The {sup 226}Ra content of the granites varied from below the minimum detection limit up to 297Bqkg{sup -1}, with an average of 83+/-73(1{sigma})Bqkg{sup -1}. The linear correlation coefficient between exhaled radon and radium content was found to be 0.90.

  2. Dosimetry of radium equivalent in construction material of brick works in Sao Jose do Sabugi City - Paraiba, Brazil

    International Nuclear Information System (INIS)

    Araujo, Eduardo Eudes Nobrega de; Santos Junior, Jose Araujo dos; Amaral, Romilton dos Santos; Santos, Josineide Marques do Nascimento; Spacov, Isabel Cristina Guerra; Fernandez, Zahily Herrero

    2015-01-01

    The earth's crust has in its composition the Naturally Occurring Radioactive Material (NORM) that may have increased concentration due to activities of exploration and extraction of environmental resources. The civil construction is an economic activity that requires the use of much of the natural resources, such as the raw material of brick works, like clays, mainly used for the production of bricks and tiles. These construction materials may contain high levels of natural radioactive elements, even with concentrations higher than the limits established, given that the levels vary according to the composition of rocks and soil, due to the geological formation and may result in increased exposure of humans to natural radioactive activities. In this context, the radioecological dosimetry is defined in terms of Radium Equivalent activity (Ra eq ), that ensure radiometric conditions for the use of material derived from clays before its final application in housing construction, an initiative that ensures the radioecological safety of population. Thus, this study aimed to establish the calculation of Ra eq in the raw material of brick works located in Sao Jose do Sabugi city, state of Paraiba, in an area adjacent to the uranium deposits of Espinharas, to estimate the risks associated with primordial radionuclides attributed to TENORM activities (Technologically Enhanced Naturally Occurring Radioactive Materials) from the extraction and use of clay as a raw material in the manufacture of bricks and tiles. Analyses were performed by High Resolution Gamma Spectrometry, with HPGe-Be detector, assuming the state of secular radioactive equilibrium. The results ranged from 183.2 to 747.78 Bq/kg, with an average of 494.6 Bq/kg which exceeded the limit of 370 Bq/kg established by UNSCEAR for construction materials. Some samples obtained values exceeded by up the double this limit, suggesting control and radiometric certification for application of this material. (author)

  3. Dosimetry of radium equivalent in construction material of brick works in Sao Jose do Sabugi City - Paraiba, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Eduardo Eudes Nobrega de; Santos Junior, Jose Araujo dos; Amaral, Romilton dos Santos; Santos, Josineide Marques do Nascimento; Spacov, Isabel Cristina Guerra; Fernandez, Zahily Herrero, E-mail: eduardo.eudes@ufpe.br, E-mail: jaraujo@ufpe.br, E-mail: romilton@ufpe.br, E-mail: neideden@hotmail.com, E-mail: isabelspacov@gmail.com, E-mail: zahily1985@gmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear. Grupo de Radioecologia

    2015-07-01

    The earth's crust has in its composition the Naturally Occurring Radioactive Material (NORM) that may have increased concentration due to activities of exploration and extraction of environmental resources. The civil construction is an economic activity that requires the use of much of the natural resources, such as the raw material of brick works, like clays, mainly used for the production of bricks and tiles. These construction materials may contain high levels of natural radioactive elements, even with concentrations higher than the limits established, given that the levels vary according to the composition of rocks and soil, due to the geological formation and may result in increased exposure of humans to natural radioactive activities. In this context, the radioecological dosimetry is defined in terms of Radium Equivalent activity (Ra{sub eq}), that ensure radiometric conditions for the use of material derived from clays before its final application in housing construction, an initiative that ensures the radioecological safety of population. Thus, this study aimed to establish the calculation of Ra{sub eq} in the raw material of brick works located in Sao Jose do Sabugi city, state of Paraiba, in an area adjacent to the uranium deposits of Espinharas, to estimate the risks associated with primordial radionuclides attributed to TENORM activities (Technologically Enhanced Naturally Occurring Radioactive Materials) from the extraction and use of clay as a raw material in the manufacture of bricks and tiles. Analyses were performed by High Resolution Gamma Spectrometry, with HPGe-Be detector, assuming the state of secular radioactive equilibrium. The results ranged from 183.2 to 747.78 Bq/kg, with an average of 494.6 Bq/kg which exceeded the limit of 370 Bq/kg established by UNSCEAR for construction materials. Some samples obtained values exceeded by up the double this limit, suggesting control and radiometric certification for application of this material

  4. Leaching of radium from mine deposits - application for planning of ground reclamation

    International Nuclear Information System (INIS)

    Chalupnik, S.

    2002-01-01

    Saline waters occurring in underground coal mines in Poland often contain natural radioactive isotopes, mainly 226 Ra from uranium series and 228 Ra from thorium series. Approximately 40% of total amount of radium remains underground in a form of radioactive deposits, but 225 MBq of 226 Ra and 400 MBq of 228 Ra are released daily into the rivers with mine effluents through surface settling ponds. Very peculiar situation is observed in coal mines, where as a result of precipitation of radium from radium-bearing waters radioactive deposits are formed. Sometimes natural radioactivity of such materials is very high, in case of scaling from coal mines radium concentration may reach 400000 Bq/kg - similar activity as for 3% uranium ore. Usually such deposits can be found underground, but sometimes co-precipitation of radium and barium takes place on the surface, in settling pond and in rivers. Therefore maintenance of solid and liquid waste with technologically enhanced natural radioactivity (TENORM) is a very important subject. Lately another problem appeared - due to the decrease of the production in Poland coal industry and dismantling of several coal mines, also the ground reclamation should be done in their vicinity. But in several cases deposits in the ponds contain enhanced levels of radium concentration. Therefore laboratory tests were done to investigate a possibility of the re-entry of radium into ground water or river waters from such deposits. Results show, that in the case of insoluble barium and radium sulphates co-precipitated out from waters type A, re-entry ratio is very small. Different situation can be observed in case of radium, adsorbed on bottom of sediments from waters type B, because re-entry ratio is much higher. Nevertheless, this phenomenon seems to be not so important and significant for the further pollution of the adjacent areas of the settling ponds in the future. (author)

  5. Radium-226

    International Nuclear Information System (INIS)

    Ammerich, Marc; Frot, Patricia; Gambini, Denis-Jean; Gauron, Christine; Moureaux, Patrick; Herbelet, Gilbert; Lahaye, Thierry; Pihet, Pascal; Rannou, Alain

    2014-03-01

    This sheet belongs to a collection which relates to the use of radionuclides essentially in unsealed sources. Its goal is to gather on a single document the most relevant information as well as the best prevention practices to be implemented. These sheets are made for the persons in charge of radiation protection: users, radioprotection-skill persons, labor physicians. Each sheet treats of: 1 - the radio-physical and biological properties; 2 - the main uses; 3 - the dosimetric parameters; 4 - the measurement; 5 - the protection means; 6 - the areas delimitation and monitoring; 7 - the personnel classification, training and monitoring; 8 - the effluents and wastes; 9 - the authorization and declaration administrative procedures; 10 - the transport; and 11 - the right conduct to adopt in case of incident or accident. This sheet deals specifically with Radium-226

  6. Hydrogen Bearing Material in the Lunar Exosphere

    Science.gov (United States)

    Hurley, D.; Benna, M.; Colaprete, A.; Retherford, K. D.; Cook, J. C.; Elphic, R. C.; Farrell, W. M.; Killen, R. M.; Sarantos, M.

    2015-12-01

    We report on observations of water and its daughters in the lunar exosphere. Data from LADEE NMS, LADEE UVS, and LRO LAMP indicating the presence of H, H2, OH, and H2O are presented in terms of their relationship to external drivers. These observations point to the roles of solar wind and micrometeoroids in the source and release of hydrogen-bearing atoms and molecules in the exosphere. In particular, the implantation of H via solar wind is found to be the largest contributor to H2 in the moon's exosphere. However, the spatial distribution is more consistent with a release mechanism centered on the morning hemisphere. Thus the data are consistent with H2 created through a 2-step process involving the implantation of solar wind and subsequent release by micrometeoroids. This accounts for >12% of the solar wind H budget, leaving day water cycle occurring on the Moon.

  7. Certified Reference Material IAEA-448: Soil from Oil Field Contaminated with Technically Enhanced Radium-226

    International Nuclear Information System (INIS)

    2013-01-01

    To ensure reliable evaluation of potential radiological hazards and proper decision making related to radiation protection measures, the IAEA, through the IAEA Environment Laboratories, supports Member State laboratories in their efforts to maintain readiness and to improve the quality of analytical results. It does so by producing reference materials, by developing standardized methods for sample collection and analysis, and by conducting interlaboratory comparisons and proficiency tests as tools for external quality control of analytical results. The problem of naturally occurring radioactive material (NORM) contamination is known to be widespread, occurring in oil and gas production facilities throughout the world. It has become a subject of attention in many IAEA Member States. In response to this radiological concern, facilities in many Member States have been characterizing the nature and extent of NORM in oil and gas installations and in the surrounding environment, evaluating the potential for exposure to workers and the public, and developing methods for properly managing these relatively high massic activity residues. Within this context, the IAEA Environment Laboratories, in cooperation with the Atomic Energy Commission of Syria, an IAEA Collaborating Centre, have prepared a new certified reference material of soil contaminated with NORM, identified as IAEA-448, certified for the massic activity of 226Ra. This report presents the methodologies used for the production and certification of IAEA-448

  8. Radium in diesel oil

    International Nuclear Information System (INIS)

    Kulich, J.

    1977-05-01

    In order to determine the addition of radon and radium to the air in mines, originatiny from the combustion of petroleum, measurements of the content of radium in diesel oil have been performed. Knowing the radium content theradon content can easily be calculated. The procedures used for the chemical analysis of radium is desribed. The ash remaining after combustion of the diesel oil is soluted in water and radium is precipiated as sulphate. The radium is detected by a ZnS (Ag) detector. The diesel oils from different petroleum companies contained between o.019-0.5pCi radium - 226. The conclution is that the consumption of diesel oils in motors used in mines does not contribute to the radium - 226 content at the air move than permissible according to norms.(K.K.)

  9. Mobile gamma-ray scanning system for detecting radiation anomalies associated with 226Ra-bearing materials

    International Nuclear Information System (INIS)

    Myrick, T.E.; Blair, M.S.; Doane, R.W.; Goldsmith, W.A.

    1982-11-01

    A mobile gamma-ray scanning system has been developed by Oak Ridge National Laboratory for use in the Department of Energy's remedial action survey programs. The unit consists of a NaI(T1) detection system housed in a specially-equipped van. The system is operator controlled through an on-board mini-computer, with data output provided on the computer video screen, strip chart recorders, and an on-line printer. Data storage is provided by a floppy disk system. Multichannel analysis capabilities are included for qualitative radionuclide identification. A 226 Ra-specific algorithm is employed to identify locations containing residual radium-bearing materials. This report presents the details of the system description, software development, and scanning methods utilized with the ORNL system. Laboratory calibration and field testing have established the system sensitivity, field of view, and other performance characteristics, the results of which are also presented. Documentation of the instrumentation and computer programs are included

  10. Biological effects of radium

    International Nuclear Information System (INIS)

    Drosselmeyer, E.

    1982-12-01

    It is evident from a survey of the current literature that a problem exists in finding the correlation between the exposure of the human body to radiation, with the subsequent development of diseases, particularly for certain types of cancer. A brief history of the early experiences of radium incorporation into humans is given followed by data collected on some important polulation groups exposed to radium body burden, such as miners in rare metal and uranium mines, dial painters and some groups of patients. The medical and technical applications of radium are discussed. A summary is also given of the natural occurence of radium and the amounts in which it is present in the environment. Incorporation, retention and excretion pathways are outlined. In order to study the metabolism and the induction of diseases by radium several animal studies have been performed. The ICRP regards radium-226 as the best known and most studied radionuclide. It can thus serve as a guideline for setting limits for other radionuclides, e.g. plutonium. The valid limiting value for radium-226 of 0.1 μCi for whole body exposure is generally accepted and regarded as sufficiently safe. Finally, transfer factors have been collected as fas as they were available in the literature. (orig./MG) [de

  11. Mine water purify from radium

    International Nuclear Information System (INIS)

    Lebecka, J.

    1996-01-01

    The article describes purification of radium containing water in coal mines. Author concludes that water purification is relatively simple and effective way to decrease environmental pollution caused by coal mining. The amount of radium disposed with type A radium water has been significantly decreased. The results of investigations show that it will be soon possible to purify also type B radium water. Article compares the amounts of radium disposed by coal mines in 1990, 1995 and forecast for 2000

  12. Overview of radium legacies in Belgium - 59367

    International Nuclear Information System (INIS)

    Dehandschutter, B.; Jadoul, L.; Mannaerts, K.; Pepin, S.; Poffijn, A.; Blommaert, W.; Sonck, M.

    2012-01-01

    The Belgian metallurgical company, Union Miniere, has been a key-player in the sector of radium production between 1922 and 1969. The factory based in Olen has extracted radium from minerals and produced radium sources during that period. The radium production facilities have been dismantled in the 70's but legacies of the former production have still to be remediated. An overview of these legacies and of their radiological characteristics will be given. Next to the sites related to radium production, other radium legacies are related to NORM industries, essentially from the phosphate sector (phosphogypsum and CaF 2 stacks). The issue of radium legacies in Belgium encompasses a variety of concrete situations. Next to the issue of the legacies of the former radium production, the other radium contaminated sites are related to current or former NORM industries, especially from the phosphate sector. The methodological and regulatory approaches towards these sites have been described elsewhere in these proceedings. The outcome differs according to the specificities of the site: it will not be the same for the legacies of former radium production where the inventory of radioactivity includes materials which have to be considered and treated as radioactive waste (for example, disused radium sources) than for phosphogypsum stacks where a sufficient level of protection may be brought by relatively simple measures such as restrictions on the use of the site. For these sites, like PG stacks, where radon is the most important exposure pathway in case of intrusion scenario, regulatory measures similar to the ones applied to 'radon-prone areas' (restrictions in the construction of buildings, compulsory radon monitoring in workplaces present on the site,...) may be implemented. In all cases, the radiological risk-assessment will be crucial for the decision-making process. The examples given showed that the probability of occurrence of 'intrusion scenario' (like construction of

  13. Electrodeposition of Radium

    International Nuclear Information System (INIS)

    Crespo, M.T.; Jimenez, A.S.

    1996-01-01

    A study of different electrodeposition methods of radium for its measurement by alpha-spectrometry is presented. The recommended procedure uses an aqueous solution of ammonium oxalate and nitric acid in the presence of microgram amounts of platinum as electrolyte

  14. Radium dial workers

    International Nuclear Information System (INIS)

    Rowland, R.E.; Lucas, H.F. Jr.

    1982-01-01

    The population of radium dial workers who were exposed to radium 30 to 50 years ago are currently being followed by the Center for Human Radiobiology at the Argonne National Laboratory. It is not clear that radium has induced additional malignancies in this population, other than the well-known bone sarcomas and head carcinomas, but elevated incidence rates for multiple myeloma and cancers of the colon, rectum, stomach, and breast suggest that radium might be involved. Continued follow-up of this population may resolve these questions. Finally, the question of the effect of fetal irradiation on the offspring of these women remains to be resolved. No evidence exists to suggest that any effects have occurred, but there is no question that a chronic irradiation of the developing fetus did take place. No formal follow-up of these children has yet been initiated

  15. Spectroscopy of neutral radium

    Energy Technology Data Exchange (ETDEWEB)

    Mol, Aran; De, Subhadeep; Jungmann, Klaus; Wilschut, Hans; Willmann, Lorenz [KVI, University of Groningen, Groningen (Netherlands)

    2008-07-01

    The heavy alkaline earth atoms radium is uniquely sensitive towards parity and time reversal symmetry violations due to a large enhancement of an intrinsic permanent electric dipole moment of the nucleous or the electron. Furthermore, radium is sensitive to atomic parity violation and the nuclear anapole moment. To prepare such experiments spectroscopy of relevant atomic states need to be done. At a later stage we will build a neutral atom trap for radium. We have built an atomic beam of the short lived isotope {sup 225}Ra with a flux of several 10{sup 4} atoms/sec. We are preparing the laser spectroscopy using this beam setup. In the preparation for efficient laser cooling and trapping we have successfully trapped barium, which is similar in it's requirements for laser cooling. The techniques which we have developed with barium can be used to trap rare radium isotopes. We report on the progress of the experiments.

  16. Comparison of radiological changes in humans exposed to radium and in beagle dogs injected with radium

    International Nuclear Information System (INIS)

    Morgan, J.P.; Kirsh, J.E.; Pool, R.R.

    1982-01-01

    Data from MIT and New Jersey studies were combined with data from the Center for Human Radiobiology, Argonne National Laboratory, to create a material of 2259 persons occupationaly exposed to radium. The population studied consisted of radium-dial painters, radium chemists, and persons who had received radium in past years in attempts to treat various medical conditions. Within a colony of beagle dogs at the LEHR, UCD, which received eight semi-monthly injections of 226 Ra were 28 dogs that received a dosage of 80 to 130 times maximum permissible skeletal burden for man (0.1 μCi 226 Ra). The intravenous injections of 226 Ra began at 435 days of age

  17. Controls on radium transport by adsorption to iron minerals

    Science.gov (United States)

    Chen, M.; Wang, T.; Kocar, B. D.

    2015-12-01

    Radium is a naturally occurring radioactive metal found in many subsurface environments. Radium isotopes are generated by uranium and thorium decay, and are particularly abundant within groundwaters where minimal porewater flux leads to accumulation. These isotopes are used as natural tracers for estimating submarine groundwater discharge (SGD) [1], allowing for large scale estimation of GW fluxes into and out of the ocean [2]. They also represent a substantial hazard in wastewater produced after hydraulic fracturing for natural gas extraction [3], resulting in a significant risk of environmental release to surface and near-surface waters, and increased cost for water treatment or disposal. Adsorption to mineral surfaces represents a dominant pathway of radium retention in subsurface environments. For SGD studies, adsorption processes impact estimates of GW fluxes, while in hydraulic fracturing, radium adsorption to aquifer solids mediates wastewater radium activities. Analysis of past sorption studies revealed large variability in partition coefficients [4], while examination of radium adsorption kinetics and surface complexation have only recently started [5]. Accordingly, we present the results of sorption and column experiments of radium with a suite of iron minerals representative of those found within deep saline and near-surface (freshwater) aquifers, and evaluate impacts of varying salinity solutions through artificial waters. Further, we explore the impacts of pyrite oxidation and ferrihydrite transformation to other iron-bearing secondary minerals on the transport and retention of radium. These results will provide critical information on the mineralogical controls on radium retention in subsurface environments, and will therefore improve predictions of radium groundwater transport in natural and contaminated systems. [1] Charette, M.A., Buesseler, K.O. & Andrews, J.E., Limnol. Oceanogr. (2001). [2] Moore, W.S., Ann. Rev. Mar. Sci. (2010). [3] Vengosh, A

  18. Radioactive artifacts: historical sources of modern radium contamination

    International Nuclear Information System (INIS)

    Blaufox, M.D.

    1988-01-01

    Radium has been distributed in a wide variety of devices during the early part of this century. Antique objects containing significant amounts of radium turn up at flea markets, antique shows, and antique dealers, in a variety of locations. These objects include radium in devices which were used by legitimate medical practitioners for legitimate medical purposes such as therapy, as well as a wide variety of quack cures. These devices may contain anywhere from a few nanocuries to as much as several hundred microcuries of radium. In addition to medical sources, a large variety of scientific instruments utilize radium in luminous dials. These instruments include compasses, azimuth indicators, and virtually any object which might require some form of calibration. In addition, the consumer market utilized a large amount of radium in the production of wrist watches, pocket watches, and clocks with luminous dials. Some of these watches contained as much as 4.5 microCi of radium, and between 1913 and 1920 about 70 gm was produced for the manufacture of luminous compounds. In addition to the large amount of radium produced for scientific and consumer utilization, there were a number of materials produced which were claimed to contain radium but in fact did not, further adding to the confusion in this area. The wide availability of radium is a result of the public's great fascination with radioactivity during the early part of this century and a belief in its curative properties. A number of objects were produced in order to trap the emanations of radium in water for persons to drink in order to benefit from their healing effects. Since the late 20s and early 30s the public's attitude towards radiation has shifted 180 degrees and it is now considered an extremely dangerous and harmful material

  19. Materials and lubrication for gear and bearing surfaces in uhv

    International Nuclear Information System (INIS)

    Kirby, R.E.; Collet, G.J.; Garwin, E.L.

    1980-06-01

    During design and construction of the SLAC polarized LEED (PLEED) system, a search was made for a dependable gear, bearing, and lubrication system for the computer-controlled Faraday cup used to measure diffracted beams. Components must be nonmagnetic, bakeable to 250 0 C, and at room temperature must operate at pressures in the 10 -9 to 10 -10 Pa range. A test system was constructed which incorporated a meshed pair of dissimilar pitch diameter spur gears, one of which was confined to (by bushings) and rotated on a fixed shaft, while the other gear was driven by a commercial rotary motion feedthrough which was rotated by a servo motor driven in sine fashion with a direction reversal every six turns and peak speeds of 50 rpm. The criterion for a successful pair was approx. 10 5 turns, the life rating for the feedthrough. Pairs had actual turn counts from less than 1 to 91,000. Materials for gears included stainless steel, beryllium copper, and aluminum alloys. Lubricants used singly and in concert were MoS 2 , WS 2 , Ag, hard chrome, and a MoS 2 -graphite-sodium silicate mixture. The successful gear pair was Ag-plated Al alloy and MoS 2 -graphite-sodium silicate-coated Be-Cu. Subsequent performance in the PLEED system after repeated bakeouts will also be discussed

  20. Materials and lubrication for gear and bearing surfaces in UHV

    International Nuclear Information System (INIS)

    Kirby, R.E.; Collet, G.J.; Garwin, E.L.

    1981-01-01

    During design and construction of the SLAC polarized LEED (PLEED) system, a search was made for a dependable gear, bearing and lubrication system for the computer-controlled Faraday cup used to measure diffracted beams. Components must be nonmagnetic, bakeable to 250 0 C, and at room temperature must operate at pressures in the 10 -9 to 10 -10 Pa range. A test system was constructed which incorporated a meshed pair of dissimilar pitch diameter spur gears, one of which was confined by bushings to a fixed shaft on which it rotated, while the other gear was driven through a commercial rotary motion feedthrough rotated by a servo motor driven in sine fashion with a direction reversal every six turns and peak speeds of 50 rpm. The criterion for a successful pair was approx. equal to 10 5 turns, the life rating for the feedthrough. Pairs had actual turn counts from less than 1 to 91 000. Materials for gears included stainless steel, beryllium copper and aluminium alloys. Lubricants used singly and in concert were MoS 2 , WS 2 , Ag, hard chrome and a MoS 2 -graphite-sodium silicate-coated Be-Cu. Subsequent performance in the PLEED system after repeated bakeouts will also be discussed. (orig.)

  1. The behaviour of radium in soil and in uranium mine-tailings

    International Nuclear Information System (INIS)

    Shoesmith, D.W.

    1984-09-01

    The existence of a number of historical wastes has prompted the need to develop a disposal strategy for material contaminated with radium-226. This report reviews the pertinent radiological and chemical properties of radium. Chemical factors that determine the mobility of radium in soil/groundwater environments are discussed. The mineralogy of mine tailings and attempts to leach them are reviewed. Radium levels in leached residues are compared to the standards for radium levels, and realistic targets are suggested for leaching methods. Techniques for scrubbing soil, immobilizing radium and treating wastewater containing radium are reviewed. Recommendations are made for a possible leaching strategy for radium-contaminated soil, and for further research to develop an effective disposal strategy

  2. Radium diagnosis campaign - 59327

    International Nuclear Information System (INIS)

    Gabillaud Poillion, Florence

    2012-01-01

    In line with the approaches already adopted in France during the 90's on various sites where research and/or radium-extraction activities were mostly conducted in the past, the French public authorities wish from now on to pursue their prevention and site-rehabilitation approach inherited from the French craftsman and medical sectors that used that radioelement. As a matter of fact, radium has been in use in several medical activities, notably in the initial methods of cancer therapy. Similarly, it was also used in some craftsman activities, such as the clock industry, for its radioluminescent properties, the fabrication of lightning conductors or cosmetics until the 60's. Those activities have generated various traces of pollution that have remained today. On the basis of the different inventories of industrial sites where radium may have been held or used, and notably the inventory updated by the French Institute for Radiation Protection and Nuclear Safety (Institut de radioprotection et de surete nucleaire - IRSN) in 2007 at the request of the French Nuclear Safety Authority (Autorite de surete nucleaire - ASN), French State services have potentially identified 134 sites that hosted radium-related activities in France. The radiological status of those sites is either unknown or very partially known by State services. Sites include both dwellings or commercial premises and derelict lands. The 'Radium Diagnosis Campaign' (Operation Diagnostic Radium), consists of a radiological survey carried out by the IRSN. In cases where traces of radium are detected, plans call for the implementation of precautionary measures and of a medical follow-up of the relevant populations. Lastly, radium-contaminated sites are rehabilitated by the French National Radioactive Waste Management Agency (Agence nationale pour la gestion des dechets radioactifs - Andra). That voluntary and positive approach on the part of public authorities is fully financed by public funds, and consequently

  3. Radium in Humans: A Review of U.S. Studies.

    Science.gov (United States)

    Rowland, R. E.

    1994-09-01

    This document was originally conceived as a description of the radium studies that took place at Argonne National Laboratory. It soon became evident, however, that to document the widespread use of radium, a brief review of the application of radium in medicine and in the US dial painting industry is required. Further, because the Argonne studies were not the only such efforts, brief overviews of the other radium programs are included. Even so, much material has been omitted. The extensive references included will allow the interested reader to find additional information. The effects of internally deposited radium in humans have been studied in this country for more than 75 years. Some 2,400 subjects have had their body contents of radium measured, and a majority of them have been followed for most of their adult lives, to understand and quantify the effects of radium. Many more individuals acquired radium internally but were never measured. Some of this group have been located and followed until death; in these cases the cause of death is known without a body content measurement. As a consequence of the efforts made to locate, measure, and follow exposed individuals, a great deal of information about the effects of radium is available. Nevertheless, great gaps remain in the knowledge of radium toxicity. The Argonne study is the largest every undertaken of the effects on humans of an internally deposited radioelement, in which the insult has been quantitated by actual measurements of the retained radioisotope. The study has now been terminated, even though more than 1,000 subjects with measured radium burdens are still alive. This document is written as a brief summary of current knowledge accumulated in this incomplete study.

  4. Radium in humans: A review of U.S. studies

    International Nuclear Information System (INIS)

    Rowland, R.E.

    1995-01-01

    This document was originally conceived as a description of the radium studies that took place at Argonne National Laboratory. It soon became evident, however, that to document the widespread use of radium, a brief review of the application of radium in medicine and in the US dial painting industry is required. Further, because the Argonne studies were not the only such efforts, brief overviews of the other radium programs are included. Even so, much material has been omitted. The extensive references included will allow the interested reader to find additional information. The effects of internally deposited radium in humans have been studied in this country for more than 75 years. Some 2,400 subjects have had their body contents of radium measured, and a majority of them have been followed for most of their adult lives, to understand and quantify the effects of radium. Many more individuals acquired radium internally but were never measured. Some of this group have been located and followed until death; in these cases the cause of death is known without a body content measurement. As a consequence of the efforts made to locate, measure, and follow exposed individuals, a great deal of information about the effects of radium is available. Nevertheless, great gaps remain in the knowledge of radium toxicity. The Argonne study is the largest every undertaken of the effects on humans of an internally deposited radioelement, in which the insult has been quantitated by actual measurements of the retained radioisotope. The study has now been terminated, even though more than 1,000 subjects with measured radium burdens are still alive. This document is written as a brief summary of current knowledge accumulated in this incomplete study

  5. 41 CFR 109-45.1003 - Recovery of silver from precious metals bearing materials.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Recovery of silver from precious metals bearing materials. 109-45.1003 Section 109-45.1003 Public Contracts and Property Management... of Precious Metals § 109-45.1003 Recovery of silver from precious metals bearing materials. The...

  6. Use of carriers for to electrodeposited radium 226

    International Nuclear Information System (INIS)

    Iturbe, J.L.

    1991-10-01

    The form of the energy distribution of a monoenergetic alpha particle starting from some emitting source of these particles, it depends on the quantity of material that its cross before being detected. Some authors deposit to the radium-226 by means of direct evaporation of the solution on metallic supports, on millipore paper and by electrodeposition. Some other ones place the radium solution in scintillation liquid, to quantify it by this technique. The objective of the present work is using carriers with the same oxidation state of the radium, that is to say of 2 + , for treating to be electrodeposited to the radium-226 with the biggest possible percentage for later use the alpha spectroscopy technique to quantify it. The carriers that have been used until its they are barium and zinc in form of barium chloride, zinc nitrate and zinc sulfate. The first results indicate that with the zinc solution a yield of 40% of electrodeposited radium has been reached. (Author)

  7. Microstructural and Material Quality Effects on Rolling Contact Fatigue of Highly Elastic Intermetallic Ball Bearings

    Science.gov (United States)

    DellaCorte, Christopher; Howard, S. Adam; Thomas, Fransua; Stanford, Malcolm K.

    2016-01-01

    Rolling element bearings made from highly-elastic intermetallic materials (HIM)s, such as 60NiTi, are under development for applications that require superior corrosion and shock resistance. Compared to steel, intermetallics have been shown to have much lower rolling contact fatigue (RCF) stress capability in simplified 3-ball on rod (ASTM STP 771) fatigue tests. In the 3-ball tests, poor material quality and microstructural flaws negatively affect fatigue life but such relationships have not been established for full-scale 60NiTi bearings. In this paper, 3-ball-on-rod fatigue behavior of two quality grades of 60NiTi are compared to the fatigue life of full-scale 50mm bore ball bearings made from the same materials. 60NiTi RCF rods with material or microstructural flaws suffered from infant mortality failures at all tested stress levels while high quality 60NiTi rods exhibited no failures at lower stress levels. Similarly, tests of full-scale bearings made from flawed materials exhibited early surface fatigue and through crack type failures while bearings made from high quality material did not fail even in long-term tests. Though the full-scale bearing test data is yet preliminary, the results suggest that the simplified RCF test is a good qualitative predictor of bearing performance. These results provide guidance for materials development and to establish minimum quality levels required for successful bearing operation and life.

  8. Nondestructive Examination Of Plutonium-Bearing Material Containers

    International Nuclear Information System (INIS)

    Yerger, L.; Mcclard, J.; Traver, L.; Grim, T.

    2010-01-01

    The first nondestructive examination (NDE) of 3013-type containers as part of the Department of Energy's (DOE's) Integrated Surveillance Program (ISP) was performed in February, 2005. Since that date 280 NDE surveillances on 255 containers have been conducted. These containers were packaged with plutonium-bearing materials at multiple DOE sites. The NDE surveillances were conducted at Hanford, Lawrence Livermore National Laboratory (LLNL), and Savannah River Site (SRS). These NDEs consisted of visual inspection, mass verification, radiological surveys, prompt gamma analysis, and radiography. The primary purpose of performing NDE surveillances is to determine if there has been a significant pressure buildup inside the inner 3013 container. This is done by measuring the lid deflection of the inner 3013 container using radiography images. These lid deflection measurements are converted to pressure measurements to determine if a container has a pressure of a 100 psig or greater. Making this determination is required by Surveillance and Monitoring Plan (S and MP). All 3013 containers are designed to withstand at least 699 psig as specified by DOE-STD-3013. To date, all containers evaluated have pressures under 50 psig. In addition, the radiography is useful in evaluating the contents of the 3013 container as well as determining the condition of the walls of the inner 3013 container and the convenience containers. The radiography has shown no signs of degradation of any container, but has revealed two packaging anomalies. Quantitative pressure measurements based on lid deflections, which give more information than the 'less than or greater than 100 psig' (pass/fail) data are also available for many containers. Statistical analyses of the pass/fail data combined with analysis of the quantitative data show that it is extremely unlikely that any container in the population of 3013 containers considered in this study (e.g., containers packaged according to the DOE-STD-3013

  9. Properties of New Glass Ionomer Restorative Materials Marketed for Stress Bearing Areas

    Science.gov (United States)

    2018-03-22

    REPORT TYPE 22/03/2018 Poster 4. TITLE AND SUBTITLE Prope1iies of New Glass-Ionomer Restorative Materials Marketed for Stress -Bearing Areas 6...Adobe Professional 7 .0 INTRODUCTION Equia Forte is a new GIC which is marketed for posterior stress bearing restorations due to its newer...research on this and other newer glass ionomer systems being indicated for use in class II posterior stress - bearing preparations. OBJECTIVE The

  10. Friction and wear properties of Cu and Fe-based P/M bearing materials

    International Nuclear Information System (INIS)

    Tufekci, Kenan; Kurbanoglu, Cahit; Durak, Ertugrul; Tunay, R. Fatih

    2006-01-01

    The performances of porous bearings under different operating conditions were experimentally investigated in this study. Material groups studied are 90%Cu + 10%Sn bronze and 1%C + % balance Fe iron-based self-lubricating P/M bearings at constant (85%) density. In the experiments, the variation of the coefficient of friction and wear ratio of those two different group materials for different sliding speeds, loads, and temperatures were investigated. As a result, the variation of the friction coefficient - temperature for both constant load, and constant sliding speed, friction coefficient - average bearing pressure, PV - wear loss and temperature-wear loss curves were plotted and compared with each other for two materials, separately. The test results showed that Cu-based bearings have better friction and wear properties than Fe-based bearings

  11. Purification of mine water of radium - The implementation of the technology in a coal mine

    International Nuclear Information System (INIS)

    Chalupnik, S.

    2002-01-01

    In underground coal mines in the Upper Silesian Coal Basin there are inflows of highly mineralised waters containing radium isotopes. These waters cause radioactive pollution of the natural environment in mining areas. Therefore cleaning of saline waters of radium is very important. Two types of radium-bearing waters were distinguished - one type containing radium and barium ions, but no sulphates (type A) and another one in which radium and sulphate ions are present but no barium (type B). A very efficient and inexpensive method of purification of saline waters, of Ba 2+ and Ra 2+ ions was developed and implemented in two coal mines. As the result of used technology, based on application of phosphogypsum as the cleaning agent, a significant decrease of radium discharge was achieved - daily of about 120 MBq of 226 Ra and 80 MBq of 228 Ra. Another type of radium waters does not contain barium ions, but contains sulphate ions SO 4 2- . There is no carrier for co-precipitation of radium so radium is transported with discharged waters to main rivers. Different method of purification from radium must be applied for such waters. Laboratory and field experiments were performed, and a cleaning method was chosen. For purification of saline waters - waste products from other industrial processes are applied. The method of purification have been applied in full technical scale in coal mine with very good results - of about 6 m 3 /min of radium-bearing waters is cleaned. Whole this process takes place in underground old workings without any contact of mining crew with radioactive deposits, which are produced during the process. As a result radium amount released to the natural environment was significantly diminished - approximately of about 90 MBq of 226 Ra per day and 150 MBq of 228 Ra. (author)

  12. Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines

    DEFF Research Database (Denmark)

    Klit, Peder; Persson, Sebastian; Vølund, Anders

    2013-01-01

    In large two-stroke marine diesel engines bearings are designed with the intention that these need not be replaced during the life of the engine. The design has shown very good service experiences. The design parameters of the main bearings are, among others, based on the average maximum specific...... load which the bearing should operate under. In general, the frictional loss is less than 1% of the nominal power of the engine but is still a target for optimization. Fatigue mechanisms of bearing lining material are not fully understood and the design limits with regards to minimum oil film thickness...

  13. Testing of bearing materials for large two-stroke marine diesel engines

    DEFF Research Database (Denmark)

    Vølund, Anders; Klit, Peder; Persson, Sebastian

    2017-01-01

    In large two-stroke marine diesel engines, bearings are designed to last the lifetime of the engine. The design has shown very good service experiences. The design parameters of the main bearings are, among others, based on the average maximum specific load which the bearing should operate under....... In general, the frictional loss is less than 1% of the nominal power of the engine but is still a target for optimization. Fatigue mechanisms of bearing lining material are not fully understood and the design limits with regards to minimum oil film thickness, max oil film pressure and oil film pressure...

  14. Denver radium site's - Case history

    International Nuclear Information System (INIS)

    Topolski, T.T.

    1985-01-01

    In developing this case history of the Denver radium sites, an attempt is made to establish the Colorado carnotite connection from the point of discovery to early development and its eventual role in the inception of the National Radium Institute and Denver's radium legacy. Early exploitive mining activities and the exportation of the highest grades of uranium ore to Europe greatly disturbed key officials at the U.S. Bureau of Mines. With its proximity to known carnotite deposits and industrial capacity, Denver's destiny as one of America's early radium production centers became a reality by 1914. With African pitchblend discoveries, Belgium competition spelled the beginning of the end of Denver's romance with radium by 1920. The sites where Denver made or used its radium were lost in obscurity for 60 years and rediscovered in 1979. Thirty one sites and a characterization of their radioactive impact are now a part of the Superfund National Priorities listing for eventual cleanup

  15. Self-Organization during Friction of Slide Bearing Antifriction Materials

    Directory of Open Access Journals (Sweden)

    Iosif S. Gershman

    2015-12-01

    Full Text Available This article discusses the peculiarities of self-organization behavior and formation of dissipative structures during friction of antifriction alloys for slide bearings against a steel counterbody. It shows that during self-organization, the moment of friction in a tribosystem may be decreasing with the load growth and in the bifurcations of the coefficient of friction with respect to load. Self-organization and the formation of dissipative structures lead to an increase in the seizure load.

  16. A Weldability Study of Structural Materials for Manufacturing Bearing Separators

    Directory of Open Access Journals (Sweden)

    V. S. Drizhov

    2016-01-01

    Full Text Available The aim is to analyze the possibility for using the 08YUT steel separator tape to manufacture separators, which are to be further applied to the bearing assembly via projection welding.Reliability of rolling bearings is determined by many factors such as surface quality of balls and rings and assembly precision, including the seal strength of hemiseparators.The technology based on the double-pulsed condenser projection welding belongs to one of the most efficient technologies to provide the assembly of bearing, for it allows welding of separator simultaneously in all currents. The paper shows that the required condition to assure high reliability of the bearing is induastial development and implementation of an effective and positive quality control system, which will reduce the probability of damages occurring both when welding and in the course of operation.The work used the static tensile test methods, as well as metallographic analysis.The experimental study used the 08YUT steel hemiseparators. A tape thickness of the hemiseparators was of 1.5mm. The number of simultaneously welded points were 8. The experimental studies of the metal damage of welding joints of the the 08YUT steel separator have shown that with a wide range of the changing welding current and compressed electrode force the quality assurance of welding points at the parent metal level could not be retrieved.The metallographic analysis of the metal damage nature of a welded joint revealed that between the atoms on the surfaces of hemiseparators there are no strong bonds – a bond was formed in the contact zone. This phenomenon leads to reduced tensile seal strength.The study has shown that aluminum and titanium added to the low-carbon steel in order to have a more fine-grained metal structure has a negative effect on the quality of welded joint via projection welding.

  17. Exposure data for radium patients

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This appendix summarizes exposure data collected as of 31 December 1981 for 2282 radium cases under study at the Center for Human Radiobiology. It includes all persons meaasured for radium since the start of te Center in 1969 and all persons for whom we have analytic data from earlier work at the Radioactivity Center of the Massachusetts Institute of Technology, the New Jersey Radium Research Project of the New Jersey department of Health, and the Argonne Radium Studies at the Argonne National Laboratory and the Argonne Cancer Research Hospital

  18. Conditioning radium needles for long term storage : Sri Lankan experience

    International Nuclear Information System (INIS)

    Ranjith, H.L.A.; Shantha, T.H.S.; Gunaratne, M.G.J.; De Silva, U.W.K.H.; Perera, H.P.H.

    2000-01-01

    Radium the first radioisotope invented by Madame Curie was used for cancer therapy for the intracavitory treatment of cervical cancers and as oral implants etc. Radium needles and other geometries were made in standard strengths and Radium therapy enjoyed a heyday during the 1st half of the 20th century. Radium-226 is a long-lived radioactive material with a half-life of 1600 years. The use of radium was abandoned in the world in 1980s with the invention of short lived radioactive materials offering remote after loading systems which minimise radiation protection and waste disposal problems associated with long lived radioactive materials. This paper reports the conditioning procedure of the spent radium sources for long term storage (less than 20 years) and transport to national/ international stores if needed. The dose received by those involved in this exercise is also discussed in terms of radiation protection. The Ra was contained for long term storage according to international radiation safety regulations with a surface dose of less than 2 mSv per hour in a conditioned package having 17.5 GBq activity and can be transported to national/international stores if needed. The highest dose received during the exercise is well within the recommended dose limits for occupational exposures (20 and 500 mSv per year) for whole body and extremities respectively

  19. Surface materials map of Afghanistan: iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Kokaly, Raymond F.; Hoefen, Todd M.; Dudek, Kathleen B.; Livo, Keith E.

    2012-01-01

    This map shows the distribution of selected iron-bearing minerals and other materials derived from analysis of HyMap imaging spectrometer data of Afghanistan. Using a NASA (National Aeronautics and Space Administration) WB-57 aircraft flown at an altitude of ~15,240 meters or ~50,000 feet, 218 flight lines of data were collected over Afghanistan between August 22 and October 2, 2007. The HyMap data were converted to apparent surface reflectance, then further empirically adjusted using ground-based reflectance measurements. The reflectance spectrum of each pixel of HyMap data was compared to the spectral features of reference entries in a spectral library of minerals, vegetation, water, ice, and snow. This map shows the spatial distribution of iron-bearing minerals and other materials having diagnostic absorptions at visible and near-infrared wavelengths. These absorptions result from electronic processes in the minerals. Several criteria, including (1) the reliability of detection and discrimination of minerals using the HyMap spectrometer data, (2) the relative abundance of minerals, and (3) the importance of particular minerals to studies of Afghanistan's natural resources, guided the selection of entries in the reference spectral library and, therefore, guided the selection of mineral classes shown on this map. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated. Minerals having similar spectral features were less easily discriminated, especially where the minerals were not particularly abundant and (or) where vegetation cover reduced the absorption strength of mineral features. Complications in reflectance calibration also affected the detection and identification of minerals.

  20. Eye changes induced by radium

    International Nuclear Information System (INIS)

    Taylor, G.N.; Lloyd, R.D.; Shabestari, L.; Angus, W.; Muggenburg, B.A.

    1989-01-01

    Radium-induced intraocular neoplasia has not been reported in people, nor were the intraocular pigmentary changes observed in the beagles described in the dial painters or the radium 226 iatrogenic cases. However, Spiess (1969) has observed a 25% incidence of multiple pigmented naevi in the iris of the radium 224 German cases and Stefani, Spiess and Mays (1986) have noted an abnormal incidence of cataracts in this same group of patients. The reasons for the absence of the much less severe radium-induced eye changes in man as compared to the dog has not been determined. Reference is also made to the authors radium 226 rodent studies with mouse strain onychomys leucogaster. (author)

  1. Embeddability behaviour of tin-based bearing material in dry sliding

    International Nuclear Information System (INIS)

    Zeren, Adalet

    2007-01-01

    In this study, tin-based bearing material has been investigated in dry sliding conditions. The low Sb content (7%) is known as SAE 12 and is Sn-Sb-Cu alloy and is widely used in the automotive industry. Wear and friction characteristics were determined with respect to sliding distance, sliding speed and bearing load, using a Tecquipment HFN type 5 journal bearing test equipment. Scanning electron microscopy (SEM) and energy-disperse X-ray spectrography (EDX) are used to understand the tribological events, especially embeddability. Thus, the purpose of this study is to investigate the tribological properties of tin-based bearing alloy used especially in heavy industrial service conditions. Tests were carried out in dry sliding conditions, since despite the presence of lubricant film, under heavy service conditions dry sliding may occur from time to time, causing local wear. As a result of local wear, bearing materials and bearing may be out of their tolerance limits in their early lifetime. Embeddability is an important property due to inversely affecting the hardness and the strength of the bearing

  2. State of art report for high temperature wear test of SMART MCP and CEDM bearing material

    International Nuclear Information System (INIS)

    Cho, Yong Hu; Lee, Jae Seon; Park, Jin Seok; Kim, Ji Ho; Kim, Jong In

    2000-03-01

    Wear resistance properties of machine elements has been more critical in view of its significant effect on life extension, economics and material saving because it has been recognized that nearly 80 percent of damages of mechanical elements in the friction pairs are due to the material loss by wear. And wear properties have direct influence on the life of a machine in a great extend under extremely severe operating condition. Therefore highly improved wear properties of machine elements operating in such circumstances is heavily required. The purpose of this report is to survey current technology for high temperature wear test in order to establish the test plan for the life evaluation of SMART MCP and CEDM bearing materials. Friction and wear test will be done under high pressure (170 MPa) and high temperature (350 degree C) with water as lubricant to simulate the operating condition of the nuclear power reactor. Because pump type for MCP is selected as the caned motor pump which needs no mechanical sealing, the rotating shaft on which bearing is fully submerged by main coolant with high temperature. So MCP bearing operates without additional lubricant. CEDM is adopted as the ball-screw type with fine controllability. So the driving part is designed as the immersed-in type by main coolant. Therefore the anti-wear and reliability of driving parts are much consequent to guarantee the lifetime and the safety of the whole system. Tribometer adapted to high temperature and pressure circumstance is needed to execute bearing material testing. Test parameters are material, sliding speed, sliding distance and applied load. In order to identify the wear mechanism, optical microscope and surface roughness testers are required. The result of this report will provide an elementary data to develop bearing materials and to estimate bearing lifetime for the bearings of MCP and CEDM in SMART. (author)

  3. Gas generation in pure and impure plutonium-bearing materials

    International Nuclear Information System (INIS)

    Mason, R.; Allen, T.; Eller, P.G.; Hagan, R.; Horrell, D.; Rink, N.

    1999-01-01

    The Los Alamos National Laboratory's (LANL's) materials identification and surveillance (MIS) project identifies materials to be stored in DOE-STD-3013-96 containers, determines the chemical and physical character of stored materials, and evaluates processing to be used to stabilize materials to meet the standard. The project has completed processing and analysis of 9 Hanford items and 24 Rocky Flats items, representing a substantial portion of the oxides to be packaged for long-term storage. The resultant data provide insight into the physical and chemical characteristics of the materials at the sites. A component of the study was to investigate gas generation for representative materials. These studies included headspace gas measurements over the 9 Hanford items, measurement of gas generation in 10-g surveillance samples of MIS powders, and pressure monitoring. Before examining the Hanford cans, sampling and analysis methods were demonstrated on HRA-905191, an item from the LANL vault. This item was not typical of materials designated to be stored in 3013 cans, as it contained plastic vials, emery cloths, paper towels, and a large percentage of thorium. However, it was one of the items that contained significant hydrogen in the headspace. A mass spectrometer was used to determine the composition of headspace gases. Oxygen was substantially depleted in all cases, and the percent of nitrogen in many items was greater than that found in air. In both cans with a high hydrogen content, the corresponding oxygen content was near zero (HRA905191 and ARF-102-85-365). In some cases, carbon dioxide was generated in the cans. Carbon monoxide was found in item BLO-39-11-85-295. This item has a high americium content, thus higher temperature than other materials examined. The only notable impurities in item BLO-39-11-85-295 were carbon at ≅0.1 wt% and chlorides at 0.2 wt%. Seven long-term surveillance vessels each holding approximately10 g of MIS powders have been monitored

  4. Processing Uranium-Bearing Materials Containing Coal and Loam

    Energy Technology Data Exchange (ETDEWEB)

    Civin, V; Prochazka, J [Research and Development Laboratory No. 3 of the Uranium Industry, Prague, Czechoslovakia (Czech Republic)

    1967-06-15

    Among the ores which are classified as low-grade in the CSSR are mixtures of coal and bentonitic loam of tertiary origin, containing approximately 0.1% U and with a moisture content at times well above 20-30%. The uranium is held mainly by the carbonaceous component. Conventional processing of these materials presents various difficulties which are not easily overcome. During leaching the pulp thickens and frequently becomes pasty, due to the presence of montmorillonites. Further complications arise from the high sorption capacity of the materials (again primarily due to montmorillonites) and poor sedimentation of the viscous pulps. In addition, the materials are highly refractory to the leaching agents. The paper presents experience gained in solving the problems of processing these ores. The following basic routes were explored: (1) separation of the carbonaceous and loamy components: The organic component appears to be the main activity carrier. Processing the concentrated material upon separation of the inactive or less active loam may not only remove the thixotropic behaviour but also substantially reduce the cost of the ore treatment; (2) 'liquifying' the pulps or preventing the thickening of the pulp by addition of suitable agents; (3) joint acid or carbonate processing of the materials in question with current ore types; (4) removal or suppression of thixotropic behaviour by thermal pretreatment of the material; and (5) application of the 'acid cure' method. The first method appears to be the most effective, but it presents considerable difficulties due to the extreme dispersion of the carbonaceous phase and further research is being carried out. Methods 2 and 3 proved to be unacceptable. Method 4, which includes roasting at 300-400{sup o}C, is now being operated on an industrial scale. The final method has also shown definite advantages for particular deposits of high montmorillonite content material. (author)

  5. Removal of radium from drinking water

    International Nuclear Information System (INIS)

    Lauch, R.P.

    1992-08-01

    The report summarizes processes for removal of radium from drinking water. Ion exchange, including strong acid and weak acid resin, is discussed. Both processes remove better than 95 percent of the radium from the water. Weak acid ion exchange does not add sodium to the water. Calcium cation exchange removes radium and can be used when hardness removal is not necessary. Iron removal processes are discussed in relation to radium removal. Iron oxides remove much less than 20 percent of the radium from water under typical conditions. Manganese dioxide removes radium from water when competition for sorption sites and clogging of sites is reduced. Filter sand that is rinsed daily with dilute acid will remove radium from water. Manganese dioxide coated filter sorption removes radium but more capacity would be desirable. The radium selective complexer selectively removes radium with significant capacity if iron fouling is eliminated

  6. Barium and radium radiopolarography

    International Nuclear Information System (INIS)

    Fourest, B.

    1979-01-01

    Radiopolarography has been applied to the study of two elements (barium and radium) which is difficult by classical polarography because of their strong electropositivity. Various parameters have been considered: nature, concentration and pH of supporting electrolyte. In any case of investigated mediums, the reduction to the metallic state reaction appeared to be reversible. An important variation of the barium half-wave potential E 1/2 with the ionic strength μ of the solution, imposed by LiCl used as supporting electrolyte, has been observed. It gives the possibility to estimate, for μ = 0, E 1/2 (Ba) = - 1.916 V/S.C.E. and E 1/2(Ra) = - 1.852 V/S.C.E. The values of barium and radium half wave potentials, obtained with a good accuracy in LiCl (or LiClO 4 ) 0.1 M medium, have been used to establish the amalgamation energy Δ 2 (M) of these elements. A linear variation of Δ 2 (M) with the metallic radius of the 2a elements has been obtained. On the other hand, by making the concentration of the complex forming agent (Cit 3- ) vary in the solution, we have a shift in the half wave potential from which we can deduce the stability constant of the complexe and its composition (BaCit - ; pK 1 =2). At last, nature and concentration of the supporting electrolyte (between 5.10 -2 M and 5M) have a determining influence on the extent of the polarogram plateau. This plateau is limited by an 'hollow effect' preceding the supporting electrolyte discharge. An interpretation of this effect is suggested which is based on the Stern model [fr

  7. Improved superheater tubing material - Ti and Nb bearing austenitic steel

    International Nuclear Information System (INIS)

    Kinoshita, K.; Mimino, T.; Minegishi, I.

    1975-01-01

    A newly developed 18 Cr-8 Ni stainless steel modified with small amounts of Ti and Nb has considerably high stress-rupture strength and is considered to be suitable for superheater material for power boilers. Data for stress-rupture and creep for long times, the strength of welded joints, the changes of characteristics due to exposure to high temperatures, etc., are presented and discussed. Some investigations after trial services indicate that the experimental data are applicable to actual applications. (author)

  8. Process for the removal of radium from acidic solutions containing same

    Science.gov (United States)

    Scheitlin, F.M.

    The invention is a process for the removal of radium from acidic aqueous solutions. In one aspect, the invention is a process for removing radium from an inorganic-acid solution. The process comprises contacting the solution with coal fly ash to effect adsorption of the radium on the ash. The radium-containing ash then is separated from the solution. The process is simple, comparatively inexpensive, and efficient. High radium-distribution coefficients are obtained even at room temperature. Coal fly ash is an inexpensive, acid-resistant, high-surface-area material which is available in large quantities throughout the United States. The invention is applicable, for example, to the recovery of /sup 226/Ra from nitric acid solutions which have been used to leach radium from uranium-mill tailings.

  9. Removal of radium from aqueous sulphate solutions

    International Nuclear Information System (INIS)

    Weir, D.R.; Masters, J.T.; Neven, M.

    1983-01-01

    Radium is often present in ores and an aqueous solution associated with the ore may consequently contain dissolved radium. It is frequently necessary to remove radium from such solutions to reduce the total radium content to a prescribed low level before the solution can be returned to the environment. The present invention is based on the discovery that the total radium content can be reduced to a satisfactory level within a reasonable time by adding a soluble barium salt to a radium-containing sulphate solution which also contains dissolved magnesium at a pH not greater than about 0 to precipitate radium as barium radium sulphate, raising the pH to at least 11 to precipitate an insoluble magnesium compound which collects the barium radium sulphate precipitate, and separating substantially all of the precipitates from the solution

  10. Research on shielding neutron efficiency of some boron-bearing fabric and transparent resin materials

    International Nuclear Information System (INIS)

    Chen Changmao; Liu Jinhua; Su Jingling; Wang Zheng

    1995-01-01

    The shielding neutron efficiency of boron-bearing materials developed recently is introduced. The thermal neutron shield ratios for two kinds of non-woven cloth with thickness of 58 mg/cm 2 and 153 mg/cm 2 are 51% and 79% respectively. Their mass attenuation coefficient for 0.186, 24.4 and 144 keV neutron are 1.56, 1.29 and 0.9 cm 2 /g respectively. The thermal neutron shield ratio is 85% for the natural boron-bearing transparent resin plate with the thickness of 0.59 g/cm 2 , and 97% for enriched boron or gadolinium bearing resin plate. The shield ratios of all three materials for 24.4 keV neutrons are 38%. The transparence of natural light for enriched boron-bearing resin plates shows no considerable change after they were exposed to thermal neutrons up to 6 Sv. After they were exposed up to 20 Sv, the transparence decreases to 50% but thermal neutron shield ratio does not change. The gadolinium-bearing plate has a very strong thermal neutron-capture gamma radiation and its dose-equivalent is greater than that of incident thermal neutrons

  11. UPTAKE OF HEAVY METALS IN BATCH SYSTEMS BY A RECYCLED IRON-BEARING MATERIAL

    Science.gov (United States)

    An iron-bearing material deriving from surface finishing operations in the manufacturing of cast-iron components demonstrates potential for removal of heavy metals from aqueous waste streams. Batch isotherm and rate experiments were conducted for uptake of cadmium, zinc, and lead...

  12. Removal of radium-226 from uranium mining effluents

    International Nuclear Information System (INIS)

    Averill, D.W.; Moffett, D.; Webber, R.T.; Whittle, L.; Wood, J.A.

    1984-12-01

    Uranium mining and milling operations usually generate large quantities of solid and liquid waste materials. A slurry, consisting of waste rock and chemical solutions from the milling operation, is discharged to impoundment areas (tailings basins). Most of the radioactive material dissolved in tailings slurries is precipitated by the addition of lime and limestone prior to discharge from the mill. However, the activity of one radioisotope, radium-226, remains relatively high in the tailings basin effluents. In Canada, radium-226 is removed from uranium mining and milling effluents by the addition of barium chloride to precipitate barium-radium sulphate [(Ba,Ra)SO 4 ]. Although dissolved radium-226 activities are generally reduced effectively, the process is considered to have two undesirable characteristics: the first related to suspended radium-226 in the effluents and the second to ultimate disposal of the (Ba,Ra)SO 4 sludge. A government-industry mining task force established a radioactivity sub-group in 1974 to assist in the development of effluent guidelines and regulations for the uranium mining industry (Radioactivity Sub-group, 1974). The investigation of more effective removal methods was recommended, including the development of mechanical treatment systems as alternatives to settling ponds. Environment Canada's Wastewater Technology Centre (WTC) initiated a bench scale study in March, 1976 which was designed to assess the feasibility of using precipitation, coagulation, flocculation and sedimentation for the removal of radium-226. In 1977, the study was accelerated with financial assistance from the Atomic Energy Control Board. The results were favourable, with improved radium removals obtained in bench scale batch tests using barium chloride as the precipitant and either alum or ferric chloride as the coagulant. A more comprehensive bench scale and pilot scale process development and demonstration program was formulated. The results of the joint study

  13. Parametric study of laminated composite material shaft of high speed rotor-bearing system

    Science.gov (United States)

    Gonsalves, Thimothy Harold; Kumar, G. C. Mohan; Ramesh, M. R.

    2018-04-01

    In this paper some of the important parameters that influence the effectiveness of composite material shaft of high speed rotor-bearing system on rotor dynamics are analyzed. The type of composite material composition, the number of layers along with their stacking sequences are evaluated as they play an important role in deciding the best configuration suitable for the high-speed application. In this work the lateral modal frequencies for five types of composite materials shaft of a high-speed power turbine rotor-bearing system and stresses due to operating torque are evaluated. The results are useful for the selection of right combination of material, number of layers and their stacking sequences. The numerical analysis is carried out using the ANSYS Rotor dynamic analysis features.

  14. Determination of radium in water

    Energy Technology Data Exchange (ETDEWEB)

    Hohorst, F.A.; Huntley, M.W.; Hartenstein, S.D.

    1995-10-01

    These detailed work instructions (DWIs) are tailored for the analysis of radium-226 and radium-228 in drinking water supplies from ground water and surface water sources and composites derived from them. The instructions have been adapted from several sources, including a draft EPA method. One objective was to minimize the generation of mixed wastes. Quantitative determinations of actinium-228 are made at 911 keV. The minimum detection level (MDL) for the gamma spectrometric measurements at this energy vary with matrix, volume, geometry, detector, background, and counting statistics. The range of MDL`s for current detectors is 0.07 to 0.5 Bq/sample. Quantitative determinations of radium-226 are made by counting the high energy alpha particles which radium-226 progeny emit using liquid scintillation counting (LSC). The minimum detectable activity (MDA) is 3.8 E-3 Bq/sample. The maximum concentration which may be counted on available instruments without dilution is about 2 E + 5 Bq/sample. Typically, this determination of radium in a 2 L sample has a yield of 80%. If radium-228 is determined using a 16 h count after 50 h grow-in, the typical MDL is 1 E-9 to 8 E-9 {mu}Ci/mL (1 to 8 pCi/L). If radium-226 is determined using a 2.5 h count after 150 h grow-in, the typical MDA is about 1 E-10 {mu}Ci/mL (0. 1 pCi/L).

  15. Determination of radium in water

    International Nuclear Information System (INIS)

    Hohorst, F.A.; Huntley, M.W.; Hartenstein, S.D.

    1995-10-01

    These detailed work instructions (DWIs) are tailored for the analysis of radium-226 and radium-228 in drinking water supplies from ground water and surface water sources and composites derived from them. The instructions have been adapted from several sources, including a draft EPA method. One objective was to minimize the generation of mixed wastes. Quantitative determinations of actinium-228 are made at 911 keV. The minimum detection level (MDL) for the gamma spectrometric measurements at this energy vary with matrix, volume, geometry, detector, background, and counting statistics. The range of MDL's for current detectors is 0.07 to 0.5 Bq/sample. Quantitative determinations of radium-226 are made by counting the high energy alpha particles which radium-226 progeny emit using liquid scintillation counting (LSC). The minimum detectable activity (MDA) is 3.8 E-3 Bq/sample. The maximum concentration which may be counted on available instruments without dilution is about 2 E + 5 Bq/sample. Typically, this determination of radium in a 2 L sample has a yield of 80%. If radium-228 is determined using a 16 h count after 50 h grow-in, the typical MDL is 1 E-9 to 8 E-9 μCi/mL (1 to 8 pCi/L). If radium-226 is determined using a 2.5 h count after 150 h grow-in, the typical MDA is about 1 E-10 μCi/mL (0. 1 pCi/L)

  16. Determination of natural uranium, thorium and radium isotopes in water and soil samples by alpha spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hao, Le Cong; Tao, Chau Van; Thong, Luong Van; Linh, Duong Mong [University of Science Ho Chi Minh City (Viet Nam). Faculty of Physics and Engineering Physics; Dong, Nguyen Van [University of Science Ho Chi Minh City (Viet Nam). Faculty of Chemistry

    2011-08-15

    In this study, a simple procedure for the determination of natural uranium, thorium and radium isotopes in water and soil samples by alpha spectroscopy is described. This procedure allows a sequential extraction polonium, uranium, thorium and radium radionuclides from the same sample in two to three days. It was tested and validated with the analysis of certified reference materials from the IAEA. (orig.)

  17. 60NiTi Intermetallic Material Evaluation for Lightweight and Corrosion Resistant Spherical Sliding Bearings for Aerospace Applications

    Science.gov (United States)

    DellaCorte, Christopher; Jefferson, Michael

    2015-01-01

    NASA Glenn Research Center and the Kamatics subsidiary of the Kaman Corporation conducted the experimental evaluation of spherical sliding bearings made with 60NiTi inner races. The goal of the project was to assess the feasibility of manufacturing lightweight, corrosion resistant bearings utilizing 60NiTi for aerospace and industrial applications. NASA produced the bearings in collaboration with Abbott Ball Corporation and Kamatics fabricated bearing assemblies utilizing their standard reinforced polymer liner material. The assembled bearings were tested in oscillatory motion at a load of 4.54kN (10,000 lb), according to the requirements of the plain bearing specification SAE AS81820. Several test bearings were exposed to hydraulic fluid or aircraft deicing fluid prior to and during testing. The results show that the 60NiTi bearings exhibit tribological performance comparable to conventional stainless steel (440C) bearings. Further, exposure of 60NiTi bearings to the contaminant fluids had no apparent performance effect. It is concluded that 60NiTi is a feasible bearing material for aerospace and industrial spherical bearing applications.

  18. Modern engines need friction bearing from modern materials; Moderne Motoren benoetigen Gleitlager aus modernen Werkstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M. [KS Gleitlager GmbH, St. Leon-Rot (Germany)

    1997-11-01

    The encreasing performance of Otto and Diesel engines leads to an increase of the cylinder pressures and, therefore, to higher loading of the engine bearings. It is necessary to recognise the future requirements especially for main and con rod bearings of the engines in order to be able to accurately develop and to launch the appropriate bearing materials respectively material combinations into series. Thereby, the functional security of the bearings meeting a complex requirement profile has priority. It is, however, just as important to offer the customer an optimal cost and advantage ratio. (orig.) [Deutsch] Bei Otto- und Dieselmotoren nahmen in den letzten Jahren die Zylinderdruecke immer mehr zu. Von 1986 bis zum Jahr 2000 wird die Gaskraft bei Pkw-Dieselmotoren um 30% von 120 auf 160 bar steigen, bei Ottomotoren betraegt der Zuwachs ebenfalls 30% von 60 auf 80 bar. Die spezifische Lagerbelastung wird sich im gleichen Zeitraum aehnlich entwickeln. Das hat direkten Einfluss auf die Belastung der Haupt- und Pleuellager und somit auch auf die Werkstoff-Entwicklung. Dieser Beitrag zeigt die wichtigsten Entwicklungen der KS Gleitlager GmbH auf. (orig.)

  19. Microstructural and Material Quality Effects on Rolling Contact Fatigue of Highly Elastic Intermetallic NiTi Ball Bearings

    Science.gov (United States)

    Dellacorte, Christopher; Howard, S. Adam; Thomas, Fransua; Stanford, Malcolm K.

    2017-01-01

    Rolling element bearings made from highly-elastic intermetallic materials (HIM)s, such as 60NiTi, are under development for applications that require superior corrosion and shock resistance. Compared to steel, intermetallics have been shown to have much lower rolling contact fatigue (RCF) stress capability in simplified 3-ball on rod (ASTM STP 771) fatigue tests. In the 3-ball tests, poor material quality and microstructural flaws negatively affect fatigue life but such relationships have not been established for full-scale 60NiTi bearings. In this paper, 3-ball-on-rod fatigue behavior of two quality grades of 60NiTi are compared to the fatigue life of full-scale 50mm bore ball bearings made from the same materials. 60NiTi RCF rods with material or microstructural flaws suffered from infant mortality failures at all tested stress levels while high quality 60NiTi rods exhibited no failures at lower stress levels. Similarly, tests of full-scale bearings made from flawed materials exhibited early surface fatigue and through crack type failures while bearings made from high quality material did not fail even in long-term tests. Though the full-scale bearing test data is yet preliminary, the results suggest that the simplified RCF test is a good qualitative predictor of bearing performance. These results provide guidance for materials development and to establish minimum quality levels required for successful bearing operation and life.

  20. Remediation of Canada's historic haul route for radium and uranium ores - the northern transportation route - 59303

    International Nuclear Information System (INIS)

    Geddes, Brian; Wenzel, Chris; Owen, Michael; Gardiner, Mark; Brown, Julie

    2012-01-01

    Established in the 1930's, the Northern Transportation Route (NTR) served to transport pitchblende ore 2,200 km from the Port Radium Mine in Canada's Northwest Territories to Fort McMurray in Alberta. From there, the ore was shipped 3,000 km by rail to the Town of Port Hope, Ontario, where it was refined for its radium content and used for medical purposes. Later, transport and refinement focussed on uranium. The corridor of lakes, rivers, portages and roads that made up the NTR included a number of transfer points, where ore was unloaded and transferred to other barges or trucks. Ore was occasionally spilled during these transfer operations and, in some cases, subsequently distributed over larger areas as properties were re-developed or modified. In addition, relatively small volumes of ore were sometimes transported by air to the south. Since 1991, the Low-Level Radioactive Waste Management Office (LLRWMO), working with communities and its consulting contractors, has conducted surveys to identify and characterize spill sites along the NTR where soils exhibit elevated concentrations of uranium, radium and/or arsenic. In addition to significant areas of impact in Fort McMurray, contamination along the NTR was centered in the Sahtu region near Great Bear Lake and along the southern part of the Slave River. Early radiological investigations found contaminated buildings and soil and occasionally discrete pieces of pitchblende ore at many transfer points and storage areas along the NTR. Where possible, survey work was undertaken in conjunction with property redevelopment activity requiring the relocation of impacted soils (e.g., at Tulita, Fort Smith, Hay River, and Fort McMurray). When feasible to consolidate contaminated material locally, it was placed into Long Term Management Facilities developed to manage and monitor the materials over extended timelines. Radiological activity generated by these engineered facilities are generally below thresholds established by

  1. Health risk assessment for radium discharged in produced waters

    International Nuclear Information System (INIS)

    Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

    1991-01-01

    Produced water generated during the production of oil and gas can contain enhanced levels of radium. This naturally occurring radioactive material (NORM) is discharged into freshwater streams, estuarine, coastal and outer continental shelf waters. Large volumes of produced waters are discharged to coastal waters along the Gulf Coast of Louisiana. The Gulf of Mexico is an important producer of fish and shellfish, and there is concern that radium discharged to coastal Louisiana could contaminate fish and shellfish used by people for food, and present a significant increase in cancer risk. This paper describes a screening-level assessment of the potential cancer risks posed by radium discharged to coastal Louisiana in oil-field produced waters. This screening analysis was performed to determine if a more comprehensive and realistic assessment is necessary, and because of the conservative assumptions embedded in the analysis overestimates the risk associated with the discharge of radium in produced waters. Two isotopes of radium (Ra-226 and Ra-228) are the radionuclides of most concern in produced water in terms of potential human health effects

  2. Improved method for the determination of dissolved radium-226

    International Nuclear Information System (INIS)

    Yang, I.C.

    1984-01-01

    Most of the current techniques for radium determination involve chemical separation of radium from major sample constituents by coprecipitation with barium or lead sulfate, followed by further radium purification. However, when samples contain biological materials, such as algae in wastewater from uranium millponds, or brine water from oil fields, the precipitation and purification processes become tedious and time-consuming. An improved method has been developed for the determination of radium-226 in such water samples, which also is applicable to natural waters. This method is based on a radon determination of alpha activity of the radon and its short-lived daughters in an alpha-scintillation cell. The radon-bubbler volume is either 90 millimeters for concentrated samples or 800 milliliters for dilute samples. For radium concentrations less than 1 picocurie per liter, 2 liters of water sample can be concentrated several-fold by simple evaporation, and decreased to 800 milliliters prior to deemanation. Because the process involves no chemical separations, chemical recoveries are nearly 100 percent. The lower limit of detection is 0.05 picocurie per liter for a 1-liter water sample and a counting time of 1000 minutes. 19 references, 3 figures, 3 tables

  3. A brownfield to greenfield success story: Denver Radium Superfund Site

    International Nuclear Information System (INIS)

    Baracani, E.; Bruskin, L.J.

    1996-01-01

    The Denver Radium Site consists of forty-nine separate sites divided into 11 operable units throughout the city of Denver, Colorado. The sites contained radioactive soils and residues (310,000 tons) from processing of radium in the early 1900s. The majority of the radioactive material was removed, transported by rail, and disposed offsite in Utah. During radiologic cleanup at the former Robinson Brick Company Site (ROBCO), (OU No. 4/5), metal contaminated soils from previous smelting operations were encountered. The Denver Radium Site was placed on the National Priorities List (NPL), and through cooperation of private parties, the state and federal governments, the land was cleaned up and restored to productive use

  4. Radium in consumer products: an historical perspective

    International Nuclear Information System (INIS)

    Holm, W.M.

    1978-01-01

    This paper demonstrates in historical and technical perspective how radium began to be used in consumer products and how changing conditions in technology and regulations have greatly modified the use of radium. In addition, the various uses of radium that have been tried or have been used in consumer products have been described, and whenever possible, the historical perspective has been used to show when devices were needed and when changing conditions caused the products to be no longer required. The historical perspective attitude is again used in the evaluation of the risks and benefits of radium in comparison to radium substitutes

  5. The centenary of discovery of radium

    International Nuclear Information System (INIS)

    Mazeron, J.-J.; Gerbaulet, A.

    1998-01-01

    Henri Becquerel presented the discovery of radium by Pierre and Marie Curie at the Paris Academy of Science on 26th December 1898. One century later, radium has been abandoned, mainly for radiation protection difficulties. It is, however, likely that modern techniques of brachytherapy have inherited to those designed for radium sources, and that radium has cured thousands and thousands patients all over the world for about eighty years. The history of discovery and medical use of radium is summarised. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  6. Eye changes induced by radium

    International Nuclear Information System (INIS)

    Taylor, G.N.; Lloyd, R.D.; Shabestari, Lorraine; Angus, Walter; Muggenburg, B.A.

    1989-01-01

    This report presents some features of the radium induced eye syndrome observed in beagles, including the prominence of intraocular pigmentary lesions and compares these with the results of rodent studies (Onychomys leucogaster) featuring a heavily pigmented uvea, and with the radiation syndrome reported in humans. (author)

  7. Inspection of radium-needles

    International Nuclear Information System (INIS)

    Stekelenburg, L.H.M. van.

    1976-01-01

    A method for leak testing of a radium point source is given. The point source was placed for three days in a closed bottle containing 15 ml of scintillation liquid (Instagel). After removing the point source, the decrease in activity was measured over a 25 day period

  8. Prehistory of Z=88 radium

    International Nuclear Information System (INIS)

    Schwankner, R.J.; Schoeffl, P.; Lieckfeld, G.

    1994-01-01

    Radium discovery in tailings of early uranium industry was the beginning of its widespread use e.g. in research, medicine and luminous paint production. It is this development taking place in various fields as well as recent results of custodian radiometry, that will be subject of the presentation. (orig.) [de

  9. Process for the removal of radium from acidic solutions containing same

    International Nuclear Information System (INIS)

    Scheitlin, F.M.

    1984-01-01

    Radium is removed from an inorganic-acid solution contacting the solution with coal fly ash to effect adsorption of the radium on the ash. The radium-containing ash then is separated from the solution. The process is simple and efficient. High radium-distribution coefficients are obtained even at room temperature. Coal fly ash is an inexpensive, acid-resistant, high-surface-area material which is available in large quantities. The invention is applicable, for example, to the recovery of 226 Ra from nitric acid solutions which have been used to leach radium from uranium-mill tailings, and thus contain thorium and uranium. The contaminated fly ash may be incorporated in a suitable matrix and stored, and the residual solutions processed to separate uranium and thorium. (author)

  10. Use of carriers for to electrodeposited radium 226; Utilizacion de portadores para electrodepositar radio 226

    Energy Technology Data Exchange (ETDEWEB)

    Iturbe, J.L

    1991-10-15

    The form of the energy distribution of a monoenergetic alpha particle starting from some emitting source of these particles, it depends on the quantity of material that its cross before being detected. Some authors deposit to the radium-226 by means of direct evaporation of the solution on metallic supports, on millipore paper and by electrodeposition. Some other ones place the radium solution in scintillation liquid, to quantify it by this technique. The objective of the present work is using carriers with the same oxidation state of the radium, that is to say of 2{sup +}, for treating to be electrodeposited to the radium-226 with the biggest possible percentage for later use the alpha spectroscopy technique to quantify it. The carriers that have been used until its they are barium and zinc in form of barium chloride, zinc nitrate and zinc sulfate. The first results indicate that with the zinc solution a yield of 40% of electrodeposited radium has been reached. (Author)

  11. Occurrence of Radium-224, Radium-226 and Radium-228 in Water from the Vincentown and Wenonah-Mount Laurel Aquifers, the Englishtown Aquifer System, and the Hornerstown and Red Bank Sands, Southwestern and South-Central New Jersey

    Science.gov (United States)

    dePaul, Vincent T.; Szabo, Zoltan

    2007-01-01

    This investigation is the first regionally focused study of the presence of natural radioactivity in water from the Vincentown and Wenonah-Mount Laurel aquifers, Englishtown aquifer system, and the Hornerstown and Red Bank Sands. Geologic materials composing the Vincentown and Wenonah-Mount Laurel aquifers and the Hornerstown and Red Bank Sands previously have been reported to contain radioactive (uranium-enriched) phosphatic strata, which is common in deposits from some moderate-depth coastal marine environments. The decay of uranium and thorium gives rise to natural radioactivity and numerous radioactive progeny, including isotopes of radium. Naturally occurring radioactive isotopes, especially those of radium, are of concern because radium is a known human carcinogen and ingestion (especially in water used for drinking) can present appreciable health risks. A regional network in southwestern and south-central New Jersey of 39 wells completed in the Vincentown and Wenonah-Mount Laurel aquifers, the Englishtown aquifer system, and the Hornerstown and Red Bank Sands was sampled for determination of gross alpha-particle activity; concentrations of radium radionuclides, major ions, and selected trace elements; and physical properties. Concentrations of radium-224, radium-226, and radium-228 were determined for water from 28 of the 39 wells, whereas gross alpha-particle activity was determined for all 39. The alpha spectroscopic technique was used to determine concentrations of radium-224, which ranged from less than 0.5 to 2.7 pCi/L with a median concentration of less than 0.5pCi/L, and of radium-226, which ranged from less than 0.5 to 3.2 pCi/L with a median concentration of less than 0.5 pCi/L. The beta-counting technique was used to determine concentrations of radium-228. The concentration of radium-228 ranged from less than 0.5 to 4.3 pCi/L with a median of less than 0.5. Radium-228, when quantifiable, had the greatest concentration of the three radium

  12. Removal of radium-226 from radium-contaminated soil using humic acid by column leaching method

    International Nuclear Information System (INIS)

    Esther Phillip; Muhamad Samudi Yasir

    2012-01-01

    In this study, evaluation of radium-226 removal from radium-contaminated soil using humic acid extracted from peat soil by column leaching method was carried out. Humic acid of concentration 100 ppm and pH 7 was leached through a column packed with radium-contaminated soil and leachates collected were analysed with gamma spectrometer to determine the leached radium-226. Results obtained indicated low removal of radium-226 between 1 - 4 %. Meanwhile, leaching profile revealed that radium-226 was bound to soil components with three different strength, thus resulting in three phases of radium-226 removal. It was estimated that the total removal of radium-226 from 10 g radium-contaminated soil sample studied could be achieved using approximately 31500 - 31850 ml HA solutions with leaching rate of 1 ml/ min. (author)

  13. Selection of contact bearing couple materials for hip prosthesis using finite element analysis under static conditions

    Science.gov (United States)

    Arirajan, K. A.; Chockalingam, K.; Vignesh, C.

    2018-04-01

    Implants are the artificial parts to replace the missing bones or joints in human anatomy to give mechanical support. Hip joint replacement is an important issue in orthopaedic surgery. The main concern limiting the long-run success of the total hip replacement is the limited service life. Hip replacement technique is widely used in replacing the femur head and acetabular cup by materials that are highly biocompatible. The success of the artificial hip replacement depends upon proper material selection, structure, and shape of the hip prosthesis. Many orthopaedic analyses have been tried with different materials, but ended with partial success on the application side. It is a critical task for selecting the best material pair in the hip prosthesis design. This work develops the finite element analysis of an artificial hip implant to study highest von Mises stress, contact pressure and elastic strain occurs for the dissimilar material combination. The different bearing couple considered for the analysis are Metal on Metal, Metal on Plastic, Metal on Ceramic, Ceramic on Plastic, Ceramic on Ceramic combinations. The analysis is carried out at different static positions of a human (i.e) standing, sitting. The results reveals that the combination with metal in contact with plastic (i.e) Titanium femoral head paired with Ultra High Molecular Weight Poly Ethylene acetabular cup reduces maximum von Mises stress and also it gives lowest contact pressure than other combination of bearing couples.

  14. X-ray fluorescence spectroscopy for the elemental analysis of plutonium-bearing materials for the materials disposition program

    International Nuclear Information System (INIS)

    Voit, S.L.; Boerigter, S.T.; Rising, T.L.

    1997-01-01

    The US Fissile Materials Disposition (MD) program will disposition about 50 MT of plutonium in the next century. Both of the alternative technologies for disposition, MOX Fuel and Immobilization require knowledge of the incoming composition to 1--5 wt%. Wavelength Dispersive X-Ray Fluorescence (WDXRF) systems, a common elemental analysis technology with a variety of industrial applications and commercial vendors, can readily achieve this level of characterization. Since much of the excess plutonium will be packaged in a long-term storage container as part of the DOE Environmental Management (DOE-EM) program to stabilize plutonium-bearing materials, the characterization system must be implemented during the packaging process. The authors describe a preliminary design for the integration of the WDXRF system into the packaging system to be used at the Rocky Flats site. The Plutonium Stabilization and Packaging System (PuSPS), coupled with the WDXRF characterization system will provide MD with stabilized plutonium-bearing excess material that can be more readily fed to an immobilization facility. The overall added expense to the MD program of obtaining analytical information after materials have been packaged in long-term storage containers could far exceed the expense of implementing XRF analysis during the packaging process

  15. Determination of radium in urine; Dosage du radium dans l'urine

    Energy Technology Data Exchange (ETDEWEB)

    Fourniguet, H; Jeanmaire, L; Jammet, H [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    A procedure for the quantitative analysis of radium in urine is described. The radium is carried by a barium sulfate precipitate. The precipitate is mixed with zinc sulfide and the activity measured by scintillation counting. It is thus possible to detect an amount of radium less than 1 pico-curie in the sample. (author) [French] Cet article decrit une technique de dosage du radium dans l'urine. Le radium entraine par un precipite de sulfate de baryum est compte par scintillation apres melange du precipite avec du sulfure de zinc. Cette methode permet de deceler moins de 1 picocurie de radium dans l'echantillon. (auteur)

  16. Case report 361: Radium intoxication with radium-induced osteonecrosis

    Energy Technology Data Exchange (ETDEWEB)

    Milgram, J.W.; Jasty, M.

    1986-03-01

    In summary, a male patient was treated with radium chloride for arthritis involving both knees at a time when he had gonococcal urethritis. He was then 20 years of age and was followed until his death 40 years later at the age of 60 years. During that interval this individual, who possessed one of the largest burdens of radium ever recorded in man, developed spontaneous fractures of both femori and one humerus, symptomatic osteonecrosis of both femoral heads, dramatic progressive radiological findings of bone, and finally, a carcinoma of the maxillary sinus which proved to be the cause of his death. Tissue was obtained from both cortical and cancellous bone at four different times during the patient's life and again at post-mortem. Progressive ischemia with abnormal calcification and then necrosis of both bone and bone marrow were demonstrated in the skeletal tissues. The pathological chances are correlated superbly with the roentgenograms in this report.

  17. Examination of Phyllosilicate-bearing Materials in the Vicinity of the Nili Fossae Using Thermal Infrared Data

    Science.gov (United States)

    McDowell, M. L.; Hamilton, V. E.

    2007-07-01

    We examine THEMIS and TES TIR data in areas OMEGA identified as containing phyllosilicates to better understand the spectral characteristics of phyllosilicate-bearing materials and reliable TES detection limits for modeled phyllosilicate abundances.

  18. Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry.

    Science.gov (United States)

    Gligorijevic, Jovan; Gajic, Dragoljub; Brkovic, Aleksandar; Savic-Gajic, Ivana; Georgieva, Olga; Di Gennaro, Stefano

    2016-03-01

    The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings.

  19. Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry

    Directory of Open Access Journals (Sweden)

    Jovan Gligorijevic

    2016-03-01

    Full Text Available The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings.

  20. Gamma-spectrometric determination of {sup 232}U in uranium-bearing materials

    Energy Technology Data Exchange (ETDEWEB)

    Zsigrai, Jozsef [European Commission, Joint Research Centre (JRC), Institute for Transuranium Elements (ITU), 76125 Karlsruhe, P.O. Box 2340 (Germany); Nguyen, Tam Cong [Centre for Energy Research of the Hungarian Academy of Sciences (EK), 1525 Budapest 114, P.O. Box 49 (Hungary); Berlizov, Andrey [European Commission, Joint Research Centre (JRC), Institute for Transuranium Elements (ITU), 76125 Karlsruhe, P.O. Box 2340 (Germany)

    2015-09-15

    The {sup 232}U content of various uranium-bearing items was measured using low-background gamma spectrometry. The method is independent of the measurement geometry, sample form and chemical composition. Since {sup 232}U is an artificially produced isotope, it carries information about previous irradiation of the material, which is relevant for nuclear forensics, nuclear safeguards and for nuclear reactor operations. A correlation between the {sup 232}U content and {sup 235}U enrichment of the investigated samples has been established, which is consistent with theoretical predictions. It is also shown how the correlation of the mass ratio {sup 232}U/{sup 235}U vs. {sup 235}U content can be used to distinguish materials contaminated with reprocessed uranium from materials made of reprocessed uranium.

  1. Unusual case of radium exposure

    International Nuclear Information System (INIS)

    Toohey, R.E.; Sha, J.Y.; Urnezis, P.W.; Hwang, E.Y.

    1984-01-01

    We have determined the body content, distribution, retention, and excretion rate of 226 Ra for a uranium mill worker who inhaled 226 Ra in an unknown form. Radium was retained in the lung with a biological half-life of 120 days, an the amount initially inhaled was estimated to be 180 +- 30 Bq. These values, combined with an observed radon retention factor of 71%, implied a 50-year dose commitment of 0.16 +- 0.04 Sv to the lung. Although it is believed that this case represents an isolated incident, it is possible that some uranium mill workers may form a contemporary population that is occupationally exposed to radium. 5 references, 2 figures, 2 tables

  2. Evaluation of cermet materials suitable for lithium lubricated thrust bearings for high temperature operation

    Science.gov (United States)

    Sinclair, J. H.; Hendrixson, W. H.

    1974-01-01

    Cerment materials (HfC - 10 wt% W; HfC - 10 wt% TaC - 10 wt%W; HfC - 2 wt% CbC - 8 wt% Mo;Hfn - 10 wt% W; Hfn - 10 wt% TaN - 10 wt% W; and ZrC - 17 wt% W) were evaluated for possible use as lithium-lubricated bearings in the control system of a nuclear reactor. Tests of compatibility with lithium were made in T-111 (Ta-8W-2Hf) capsules at temperatures up to 1090 C. The tendencies of HfC-TaC-W, HfC-CbC-Mo, and HfN-W to bond to themselves and to the refractory alloys T-111 and TZM when enclosed in lithium-filled capsules under a pressure of 2000 psi at 980 and 1200 C for 1933 hours were evaluated. Thermal expansion characteristics were determined for the same three materials from room temperature to 1200 C. On the basis of these tests, HfC-10 TaC-10W and HfN-10W were selected as the best and second best candidates, respectively, of the materials tested for the bearing application.

  3. Self-lubricating tribological characterization of lead free Fe-Cu based plain bearing material

    Directory of Open Access Journals (Sweden)

    Shuhaib Mushtaq

    2017-03-01

    Full Text Available The negative impact of lead on environment and thereby its reciprocity on the health of mankind, there is a growing emphasis on resisting the usage of lead in bearings. Owing to this, new bearing materials that provide comparable tribological performance to that of lead containing alloys are being developed. In this study, lead free Fe-Cu based powders with addition of elements such as tin, molybdenum disulfide and Nano boron nitride (BN have been developed by powder metallurgy (PM technique in order to improve the tribological and mechanical properties. The powder mixtures were compressed at a pressure of 500 MPa, and then sintered in dry hydrogen atmosphere at 9000C for 50 minutes. The mechanical and tribological properties obtained due to addition of the said elements is presented in this study. The tribological behavior of the selected alloys is analyzed by reciprocating-sliding tests under dry conditions. The morphology of wear scars and the microstructure of the wear surfaces were investigated. The material with 2.5 wt.% of Sn exhibited the highest value of hardness, the material with 7.5 wt.% of Nano BN comparably shows the low coefficient of friction and wear rate as compared with 5 wt.% of Nano BN.

  4. Strength of briquettes made of Cu concentrate and carbon-bearing materials

    Directory of Open Access Journals (Sweden)

    B. Oleksiak

    2015-01-01

    Full Text Available In the present paper, results of the research on application of residual fine-grained, carbon-bearing materials as coke substitutes in the shaft process of copper matter smelting are discussed. The addition was introduced into the charge as a component of concentrate-made briquettes, then, its effects on properties of the obtained briquettes were analysed for their compressive and drop strengths. The results of investigations confirmed the potential use of proposed alternative fuels (as briquette components in the process of copper matte smelting.

  5. Leukemia and radium groundwater contamination

    International Nuclear Information System (INIS)

    Tracy, B.L.; Letourneau, E.G.

    1986-01-01

    In the August 2, 1985, issue of JAMMA, Lyman et al claim to have shown an association between leukemia incidence in Florida and radium in groundwater supplies. Although cautious in their conclusions, the authors imply that this excess in leukemia was in fact caused by radiation. The authors believe they have not presented a convincing argument for causation. The radiation doses at these levels of exposure could account for only a tiny fraction of the leukemia excess

  6. Plutonium-bearing materials feed report for the DOE Fissile Materials Disposition Program alternatives

    International Nuclear Information System (INIS)

    Brough, W.G.; Boerigter, S.T.

    1995-01-01

    This report has identified all plutonium currently excess to DOE Defense Programs under current planning assumptions. A number of material categories win clearly fan within the scope of the MD (Materials Disposition) program, but the fate of the other categories are unknown at the present time. MD planning requires that estimates be made of those materials likely to be considered for disposition actions so that bounding cases for the PEIS (Programmatic Environmental Impact Statement) can be determined and so that processing which may be required can be identified in considering the various alternatives. A systematic analysis of the various alternatives in reachmg the preferred alternative requires an understanding of the possible range of values which may be taken by the various categories of feed materials. One table identifies the current total inventories excess to Defense Program planning needs and represents the bounding total of Pu which may become part of the MD disposition effort for all materials, except site return weapons. The other categories, principally irradiated fuel, rich scrap, and lean scrap, are discussed. Another table summarizes the ranges and expected quantities of Pu which could become the responsibility of the MD program. These values are to be used for assessing the impact of the various alternatives and for scaling operations to assess PEIS impact. Determination of the actual materials to be included in the disposition program will be done later

  7. Radium issues at Hunters Point Annex

    International Nuclear Information System (INIS)

    Dean, S.M.

    1994-01-01

    Radium was a common source of illumination used in numerous instruments and gauges for military equipment prior to 1970. As a result of its many military applications radium 226 is now a principle radionuclide of concern at military base closures sites throughout the United States. This is an overview of the site characterization strategy employed and a potential site remediation technology being considered at a radium contaminated landfill at Hunters Point Annex, a former U.S. Navy shipyard in San Francisco, California

  8. Modelisation and distribution of neutron flux in radium-beryllium source (226Ra-Be)

    Science.gov (United States)

    Didi, Abdessamad; Dadouch, Ahmed; Jai, Otman

    2017-09-01

    Using the Monte Carlo N-Particle code (MCNP-6), to analyze the thermal, epithermal and fast neutron fluxes, of 3 millicuries of radium-beryllium, for determine the qualitative and quantitative of many materials, using method of neutron activation analysis. Radium-beryllium source of neutron is established to practical work and research in nuclear field. The main objective of this work was to enable us harness the profile flux of radium-beryllium irradiation, this theoretical study permits to discuss the design of the optimal irradiation and performance for increased the facility research and education of nuclear physics.

  9. Port Radium Canada's Original Radium/Uranium Mine, The Complete Story of Canada's Historic Radium/Uranium Mine, 1932 to 2012 - 13159

    Energy Technology Data Exchange (ETDEWEB)

    Chambers, Doug; Wiatzka, Gerd [SENES Consultants Limited, 121 Granton Drive, Unit 12, Richmond Hill, ON L4B 3N4 (United States); Brown, Steve [SENES Consultants Limited, 8310 South Valley Highway, Suite 3016, Englewood, Colorado 80112 (United States)

    2013-07-01

    This paper provides the life story of Canada's original radium/uranium mine. In addition to the history of operations, it discusses the unique and successful approach used to identify the key issues and concerns associated with the former radium, uranium and silver mining property and the activities undertaken to define the remedial actions and subsequent remedial plan. The Port Radium Mine site, situated approximately 275 km north of Yellowknife on the east shore of Great Bear Lake, Northwest Territories, was discovered in 1930 and underground mining began in 1932. The mine operated almost continuously from 1932 to 1982, initially for recovery of radium, then uranium and finally, for recovery of silver. Tailings production totaled an estimated 900,000 tons and 800,000 tons from uranium and silver processing operations respectively. In the early days of mining, Port Radium miners were exposed to radon and associated decay product levels (in Working Level Months of exposure - WLM) hundreds of times greater than modern standards. The experience of the Port Radium miners provides important contribution to understanding the risks from radon. While the uranium mine was originally decommissioned in the early 1960's, to the standards of the day, the community of Deline (formerly Fort Franklin) had concerns about residual contamination at the mine site and the potential effects arising from use of traditional lands. The Deline people were also concerned about the possible risks to Deline Dene arising from their work as ore carriers. In the late 1990's, the community of Deline brought these concerns to national attention and consequently, the Government of Canada and the community of Deline agreed to move forward in a collaborative manner to address these concerns. The approach agreed to was to establish the Canada-Deline Uranium Table (CDUT) to provide a joint process by which the people of Deline could have their concerns expressed and addressed. A great

  10. Port Radium Canada's Original Radium/Uranium Mine, The Complete Story of Canada's Historic Radium/Uranium Mine, 1932 to 2012 - 13159

    International Nuclear Information System (INIS)

    Chambers, Doug; Wiatzka, Gerd; Brown, Steve

    2013-01-01

    This paper provides the life story of Canada's original radium/uranium mine. In addition to the history of operations, it discusses the unique and successful approach used to identify the key issues and concerns associated with the former radium, uranium and silver mining property and the activities undertaken to define the remedial actions and subsequent remedial plan. The Port Radium Mine site, situated approximately 275 km north of Yellowknife on the east shore of Great Bear Lake, Northwest Territories, was discovered in 1930 and underground mining began in 1932. The mine operated almost continuously from 1932 to 1982, initially for recovery of radium, then uranium and finally, for recovery of silver. Tailings production totaled an estimated 900,000 tons and 800,000 tons from uranium and silver processing operations respectively. In the early days of mining, Port Radium miners were exposed to radon and associated decay product levels (in Working Level Months of exposure - WLM) hundreds of times greater than modern standards. The experience of the Port Radium miners provides important contribution to understanding the risks from radon. While the uranium mine was originally decommissioned in the early 1960's, to the standards of the day, the community of Deline (formerly Fort Franklin) had concerns about residual contamination at the mine site and the potential effects arising from use of traditional lands. The Deline people were also concerned about the possible risks to Deline Dene arising from their work as ore carriers. In the late 1990's, the community of Deline brought these concerns to national attention and consequently, the Government of Canada and the community of Deline agreed to move forward in a collaborative manner to address these concerns. The approach agreed to was to establish the Canada-Deline Uranium Table (CDUT) to provide a joint process by which the people of Deline could have their concerns expressed and addressed. A great deal of work was

  11. Removal of radium from drinking water

    International Nuclear Information System (INIS)

    Clifford, D.A.

    1990-01-01

    The traditional, proven process for radium removal are sodium ion exchange softening, lime softening, and reverse osmosis. The newer, radium-specific column processes include adsorption onto the Dow RSC and BaSO 4 -impregnated alumina. The most promising new radium-specific treatment process for large-scale use is adsorption onto preformed manganese dioxide followed by multimedia or diatomaceous earth filtration The disposal of radium-contaminated wastewaters and sludges from processes under consideration will be a major factor in process selection. The processes of choice for municipal water supply treatment to remove radium are sodium ion exchange softening, lime softening, manganese dioxide adsorption-filtration, and selective adsorption onto the Dow RSC or BaSO 4 -impregnated alumina. Where the water is brackish, reverse osmosis hyperfiltration should also be considered. The radium removal process of choice for whole-house or point-of-entry treatment is sodium ion exchange softening. For point-of-use radium removal, a standard reverse osmosis system including cartridge filtration, activated carbon adsorption, and reverse osmosis hyperfiltration is recommended. Although no cost estimates have been made, the relative costs from most expensive to least expansive, for radium removal in small community water supplies are reverse osmosis, sodium ion exchange softening, lime soda softening, manganese dioxide adsorption-filtration, and the radium-selective adsorbents. 34 refs., 7 figs., 2 tabs

  12. Toxicological profile for radium. Final report

    International Nuclear Information System (INIS)

    1990-12-01

    The ATSDR Toxicological Profile for Radium is intended to characterize succinctly the toxicological and health effects information for the substance. It identifies and reviews the key literature that describes the substances' toxicological properties. Other literature is presented but described in less detail. The profile is not intended to be an exhaustive document; however, more comprehensive sources of specialty information are referenced. The profile begins with a public health statement, which describes in nontechnical language the substance's relevant toxicological properties. Following the statement is material that presents levels of significant human exposure and, where known, significant health effects. The adequacy of information to determine the substance's health effects is described. Research gaps in nontoxic and health effects information are described. Research gaps that are of significance to the protection of public health will be identified in a separate effort. The focus of the document is on health and toxicological information

  13. Radium organisation and radiation protection

    International Nuclear Information System (INIS)

    Goyal, D.R.; Negi, P.S.; Dutta, T.K.; Gupta, B.D.

    1977-01-01

    In India, the brachytherapy sources used are mostly 226 Ra, 137 Cs and 60 CO. Radiotherapy of patients with these sources may also result in some degree of radiation exposure of radiologists, technologists, radiation source porters and even other workers in rooms around radiotherapy unit. Proper organization of radiotherapy unit leads to accuracy in treatment and protection to patients as well as medical and paramedical personnel. With this objective in view, a set of instructions to be followed while working with radiation sources, particularly radium; guidelines for the physical layout of the unit and staffing and a list of essential monitoring instruments are given. (M.G.B.)

  14. Formerly utilized MED/AEC Sites Remedial Action Program. Radiological survey of the former VITRO Rare Metals Plant, Canonsburg, Pennsylvania. Final report. [Plant to extract radium and uranium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-06-01

    This 18-acre site was used from 1911 to 1922 to extract radium from carnotite ore, from 1930 to 1942 to extract radium and uranium salts from onsite residues and carnotite ore, and from 1942 to 1957 to recover uranium from various ores and scrap materials. The radiological survey was conducted in two phases, Phase I included measurement of radon and radon daughter concentrations in onsite buildings; concentrations measured in this part of the survey were all above guideline levels. Phase II consisted of measurement of surface contamination levels on the site, external gamma radiation levels at 1 m above surfaces on and near the site, radionuclide concentrations in surface and subsurface soil and water on and near the site, and radon concentrations in air at offsite locations. The results of the second phase of the survey indicate that large quantities of the radioactive wastes generated during radium and uranium recovery operations still remain on the site. Radium-bearing wastes are present in soil beneath or adjacent to each of the buildings on the site and in the top few feet of soil over almost the entire site, with some areas being contaminated to a depth of 16 ft or more. Alpha contamination levels, beta--gamma dose rates, and external gamma radiation levels in some areas of the buildings and outdoors on the site are above current federal guidelines concerning the release of property for unrestricted use. Concentrations of /sup 226/Ra in water in holes drilled on the site are above the maximum permissible concentration (MPC/sub w/). Also, measurements made offsite show that contamination from the site has spread to nearby offsite locations, and that there is significant atmospheric transport of /sup 222/Rn from the site.

  15. Radium in baggerspecie afkomstig uit het Rijnmondgebied

    NARCIS (Netherlands)

    Bijwaard H; Overwater RMW; Glastra P; Nissan LA; LSO

    2003-01-01

    The radium concentration was measured in 25 samples of harbour sludge taken from the Rijnmond area (Rotterdam harbours and the Nieuwe Waterweg) in 2002. High radium levels were found near the former discharge points of the phosphate ore processing plants, confirming the results of previous

  16. Cancer incidence after nasopharyngeal radium irradiation

    NARCIS (Netherlands)

    Ronckers, Cécile M.; van Leeuwen, Flora E.; Hayes, Richard B.; Verduijn, Pieter G.; Stovall, Marilyn; Land, Charles E.

    2002-01-01

    From 1940 until 1970, nasopharyngeal radium irradiation was used to treat children and military personnel suffering from Eustachian tube failure attributable to local lymphoid hyperplasia. We studied cancer incidence in a cohort of 4339 Dutch patients treated with nasopharyngeal radium irradiation,

  17. NiTi Alloys: New Materials that enable Shockproof, Corrosion Immune Bearings

    Science.gov (United States)

    DellaCorte, Christopher

    2017-01-01

    Though steel is the dominant material of choice for mechanical components (bearings and gears) it has intrinsic limitations related to corrosion and plastic deformation. In contrast, dimensionally stable nickel-rich Ni-Ti alloys, such as Nitinol 60, are intrinsically rustproof and can withstand high contact loads without damage (denting). Over the last decade, focused RD to exploit these alloys for new applications has revealed the science behind NiTi's remarkable properties. In this presentation, the state-of-the-art of nickel-rich NiTi alloys will be introduced along with a discussion of how NASA is adopting this new technology inside the space station water recycling system as a pathfinder for more down-to-earth tribological challenges.

  18. Association of leukemia with radium groundwater contamination

    International Nuclear Information System (INIS)

    Lyman, G.H.; Lyman, C.G.; Johnson, W.

    1985-01-01

    Radiation exposure, including the ingestion of radium, has been causally associated with leukemia in man. Groundwater samples from 27 counties on or near Florida phosphate lands were found to exceed 5 pCi/L total radium in 12.4% of measurements. The incidence of leukemia was greater in those counties with high levels of radium contamination (greater than 10% of the samples contaminated) than in those with low levels of contamination. Rank correlation coefficients of .56 and .45 were observed between the radium contamination level and the incidence of total leukemia and acute myeloid leukemia, respectively. The standardized incidence density ratio for those in high-contamination counties was 1.5 for total leukemia and 2.0 for acute myeloid leukemia. Further investigation is necessary, however, before a causal relationship between groundwater radium content and human leukemia can be established

  19. Procedures for sampling radium-contaminated soils

    International Nuclear Information System (INIS)

    Fleischhauer, H.L.

    1985-10-01

    Two procedures for sampling the surface layer (0 to 15 centimeters) of radium-contaminated soil are recommended for use in remedial action projects. Both procedures adhere to the philosophy that soil samples should have constant geometry and constant volume in order to ensure uniformity. In the first procedure, a ''cookie cutter'' fashioned from pipe or steel plate, is driven to the desired depth by means of a slide hammer, and the sample extracted as a core or plug. The second procedure requires use of a template to outline the sampling area, from which the sample is obtained using a trowel or spoon. Sampling to the desired depth must then be performed incrementally. Selection of one procedure over the other is governed primarily by soil conditions, the cookie cutter being effective in nongravelly soils, and the template procedure appropriate for use in both gravelly and nongravelly soils. In any event, a minimum sample volume of 1000 cubic centimeters is recommended. The step-by-step procedures are accompanied by a description of the minimum requirements for sample documentation. Transport of the soil samples from the field is then addressed in a discussion of the federal regulations for shipping radioactive materials. Interpretation of those regulations, particularly in light of their application to remedial action soil-sampling programs, is provided in the form of guidance and suggested procedures. Due to the complex nature of the regulations, however, there is no guarantee that our interpretations of them are complete or entirely accurate. Preparation of soil samples for radium-226 analysis by means of gamma-ray spectroscopy is described

  20. Contact Mechanics and Failure Modes of Compliant Polymeric Bearing Materials for Knee Cartilage Replacement

    Science.gov (United States)

    Tohfafarosh, Mariya Shabbir

    control samples. However, chemical spectra of electron beam sterilized samples revealed minor changes, which were absent in unsterilized and gamma sterilized samples. Upon successful sterilization evaluation, both polycarbonate urethane and the novel hydrogel were investigated for the contact mechanics of compliant-on-compliant artificial knee bearings using a finite element analysis approach. A simplified, axisymmetric, finite element model of a medial knee compartment was developed and validated, and a design of simulation experiments was carried out to evaluate the effect of implant conformity, implant thickness and material properties on the contact mechanics of compliant knee bearings under normal walking and stair climbing loads. All input parameters, namely, implant conformity, implant thickness and material properties, significantly (pengineering strain (39 - 53% true strain) without any signs of cracking or fracture. The tension was determined to be the primary failure mode for the proposed materials, and the tensile test was used to define the failure criteria of the materials. The unconfined compression tests were used to define the yield stresses and strains under compression, which is the main mode of loading for the knee joint. The results of the plane strain compression were modeled using a finite element model and the maximum principal stress, von Mises stress, maximum shear stress, and maximum principal strain failure criteria were predicted at the corresponding yield strain of each material formulation. Upon comparing the knee model contact stress and strain prediction under normal walking and stair climbing loads with those of the empirical failure criteria at yield, the polycarbonate urethane showed better overall potential for use in compliant knee implants, while the hydrogels exhibited higher potential for delamination or fracture, especially if appropriate implant conformity and thickness are not employed. The outcome of this study and the previous

  1. Development of a container for the transportation and storage of plutonium bearing materials

    International Nuclear Information System (INIS)

    Ammerman, D.; Geinitz, R.; Thorp, D.; Rivera, M.

    1998-03-01

    There is a large backlog of plutonium contaminated materials at the Rocky Flats Environmental Technology Site near Denver, Colorado, USA. The clean-up of this site requires this material to be packaged in such a way as to allow for efficient transportation to other sites or to a permanent geologic repository. Prior to off-site shipment of the material, it may be stored on-site for a period of time. For this reason, it is desirable to have a container capable of meeting the requirements for storage as well as the requirements for transportation. Most of the off-site transportation is envisioned to take place using the TRUPACT-II Type B package, with the Waste Isolation Pilot Plant (WIPP) as the destination. Prior to the development of this new container, the TRUPACT-II had a limit of 325 FGE (fissile gram equivalents) of plutonium due to criticality control concerns. Because of the relatively high plutonium content in the material to be transported, transporting 325 FGE per TRUPACT-II is uneconomical. Thus, the purpose of the new containers is to provide criticality control to increase the allowed TRUPACT-II payload and to provide a safe method for on-site storage prior to transport. This paper will describe the analysis and testing used to demonstrate that the Pipe Overpack Container provides safe on-site storage of plutonium bearing materials in unhardened buildings and provides criticality control during transportation within the TRUPACT-II. Analyses included worst-case criticality analyses, analyses of fork-lift time impacts, and analyses of roof structure collapse onto the container. Testing included dynamic crush tests, bare pipe impact tests, a 30-minute totally engulfing pool-fire test, and multiple package impact tests in end-on and side-on orientations

  2. Redistribution of elements between wastes and organic-bearing material in the dispersion train of gold-bearing sulfide tailings: Part I. Geochemistry and mineralogy.

    Science.gov (United States)

    Saryg-Ool, B Yu; Myagkaya, I N; Kirichenko, I S; Gustaytis, M A; Shuvaeva, O V; Zhmodik, S M; Lazareva, E V

    2017-03-01

    Migration and redistribution of elements during prolonged interaction of cyanide wastes with the underlying natural organic-bearing material have been studied in two ~40cm deep cores that sample primary ores and their weathering profile (wastes I and II, respectively) in the dispersion train of gold-bearing sulfide tailings in Siberia. Analytical results of SR-XRF, whole-rock XRF, AAS, CHNS, and SEM measurements of core samples show high K, Sr, Ti, and Fe enrichments and correlation of P 2 O 5 and Mn with LOI and C org . Organic material interlayered or mixed with the wastes accumulates Cu, Zn, Se, Cd, Ag, Au, and Hg. The peat that contacts wastes II bears up to 3wt.% Zn, 1000g/t Se, 100g/t Cd, and 8000g/t Hg. New phases of Zn and Hg sulfides and Hg selenides occur as abundant sheaths over bacterial cells suggesting microbial mediation in sorption of elements. Organic-bearing material in the cores contains 10-30g/t Au in 2-5cm thick intervals, both within and outside the intervals rich in sulfides and selenides. Most of gold is invisible but reaches 345g/t and forms 50nm to 1.5μm Au 0 particles in a thin 2-3cm interval of organic remnants mixed with wastes I. Vertical and lateral infiltration of AMD waters in peat and oxidative dissolution of wastes within the dispersion train of the Ursk tailings lead to redistribution of elements and their accumulation by combined physical (material's permeability, direction AMD), chemical (complexing, sorption by organic matter and Fe(III) hydroxides) and biochemical (metabolism of sulfate-reducing bacteria) processes. The accumulated elements form secondary sulfates, and Hg and Zn selenides. The results provide insights into accumulation of elements in the early history of coal and black shale deposits and have implications for remediation of polluted areas and for secondary enrichment technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Covalent Organic Framework Material bearing Phloroglucinol Building Units as a Potent Anticancer Agent

    KAUST Repository

    Bhanja, Piyali; Mishra, Snehasis; Manna, Krishnendu; Mallick, Arijit; Das Saha, Krishna; Bhaumik, Asim

    2017-01-01

    Covalent organic frameworks (COFs) having periodicity in pores of nanoscale dimensions can be suitably designed for the organic building units bearing reactive functional groups at their surfaces. Thus, they are an attractive option as an anticancer agent to overcome the limitations of chemotherapy. Herein, we first report a new porous biodegradable nitrogen containing COF material, EDTFP-1 (ethylenedianiline-triformyl phloroglucinol), synthesized using 4,4'-ethylenedianiline and 2,4,6-triformylphloroglucinol via Schiff base condensation reaction. EDTFP-1 exhibited 3D-hexagonal porous structure with average pores of ca. 1.5 nm dimension. Here, we have explored the anti-cancer potentiality of EDTFP-1. Result demonstrated an enhanced cytotoxicity was observed against four cancer cells HCT 116, HepG2, A549, and MIA-Paca2 with significant lower IC50 on HCT116 cells. Additionally, EDTFP-1-induced cell death was associated with the characteristic apoptotic changes like cell membrane blebbing, nuclear DNA fragmentation, externalization of phosphatidylserine from the cell membrane followed by a loss of mitochondrial membrane potential as well as modulation of pro and anti-apoptotic proteins. Further, the result depicted a direct correlation between the generations of ROS with mitochondrial-dependant apoptosis through the involvement of p53 phosphorylation upon EDTFP-1 induction, suggesting this COF material is a novel chemotherapeutic agent for cancer treatment.

  4. Covalent Organic Framework Material bearing Phloroglucinol Building Units as a Potent Anticancer Agent

    KAUST Repository

    Bhanja, Piyali

    2017-08-23

    Covalent organic frameworks (COFs) having periodicity in pores of nanoscale dimensions can be suitably designed for the organic building units bearing reactive functional groups at their surfaces. Thus, they are an attractive option as an anticancer agent to overcome the limitations of chemotherapy. Herein, we first report a new porous biodegradable nitrogen containing COF material, EDTFP-1 (ethylenedianiline-triformyl phloroglucinol), synthesized using 4,4\\'-ethylenedianiline and 2,4,6-triformylphloroglucinol via Schiff base condensation reaction. EDTFP-1 exhibited 3D-hexagonal porous structure with average pores of ca. 1.5 nm dimension. Here, we have explored the anti-cancer potentiality of EDTFP-1. Result demonstrated an enhanced cytotoxicity was observed against four cancer cells HCT 116, HepG2, A549, and MIA-Paca2 with significant lower IC50 on HCT116 cells. Additionally, EDTFP-1-induced cell death was associated with the characteristic apoptotic changes like cell membrane blebbing, nuclear DNA fragmentation, externalization of phosphatidylserine from the cell membrane followed by a loss of mitochondrial membrane potential as well as modulation of pro and anti-apoptotic proteins. Further, the result depicted a direct correlation between the generations of ROS with mitochondrial-dependant apoptosis through the involvement of p53 phosphorylation upon EDTFP-1 induction, suggesting this COF material is a novel chemotherapeutic agent for cancer treatment.

  5. The Environmental Behaviour of Radium: Revised Ed

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-15

    A number of industrial activities produce residues containing either uranium or thorium series radionuclides or both. These include the mining and milling of uranium and of other metalliferous and non-metallic ores; the production of coal, oil and gas; the extraction and purification of water; and the production of industrial minerals such as phosphates. Residues from such activities have become of increasing interest from a radiological impact assessment point of view in recent years and isotopes of radium are often of particular interest in such assessments. The IAEA attaches high importance to the dissemination of information that can assist Member States with the implementation and improvement of activities related to radiation safety standards, including management of radioactive residues containing natural radionuclides, such as radium isotopes. In 1990, the IAEA published Technical Reports Series No. 310 (TRS 310), The Environmental Behaviour of Radium. Since the publication of TRS 310, a considerable number of publications related to the environmental behaviour of radium have appeared in the literature. It was therefore considered timely to produce a replacement report providing up to date information on key transfer processes, concepts and models that are important in radiological assessments and environmental applications of radium. This report outlines radium behaviour in terrestrial, freshwater and marine environments. The primary objective of the report is to provide IAEA Member States with information for use in the radiological assessment of accidental releases and routine discharges of radium in the environment, and in remediation planning for areas contaminated by radium. Additionally, applications of radium isotopes as tracers of environmental processes are discussed.

  6. The Environmental Behaviour of Radium: Revised Ed

    International Nuclear Information System (INIS)

    2014-01-01

    A number of industrial activities produce residues containing either uranium or thorium series radionuclides or both. These include the mining and milling of uranium and of other metalliferous and non-metallic ores; the production of coal, oil and gas; the extraction and purification of water; and the production of industrial minerals such as phosphates. Residues from such activities have become of increasing interest from a radiological impact assessment point of view in recent years and isotopes of radium are often of particular interest in such assessments. The IAEA attaches high importance to the dissemination of information that can assist Member States with the implementation and improvement of activities related to radiation safety standards, including management of radioactive residues containing natural radionuclides, such as radium isotopes. In 1990, the IAEA published Technical Reports Series No. 310 (TRS 310), The Environmental Behaviour of Radium. Since the publication of TRS 310, a considerable number of publications related to the environmental behaviour of radium have appeared in the literature. It was therefore considered timely to produce a replacement report providing up to date information on key transfer processes, concepts and models that are important in radiological assessments and environmental applications of radium. This report outlines radium behaviour in terrestrial, freshwater and marine environments. The primary objective of the report is to provide IAEA Member States with information for use in the radiological assessment of accidental releases and routine discharges of radium in the environment, and in remediation planning for areas contaminated by radium. Additionally, applications of radium isotopes as tracers of environmental processes are discussed

  7. Radium removal from Australian spa waters

    International Nuclear Information System (INIS)

    Dickson, B.L.; Meakins, R.L.; Bland, C.J.

    1982-01-01

    The dissolved radium content of some mineral spring waters in Victoria and Queensland has been found to exceed the maximum permissible concentration in drinking water. Activities in excess of 40 pCi/1 were measured in some bottles. Studies revealed that the dissolved radium content decreased markedly if the spring water was aerated and filtered prior to bottling. The sediment removed contained ferric hydroxide which is a natural scavenging agent for radium. The formation of such sediments in storage tanks and their removal prior to bottling may create a possible radiation hazard

  8. Radium removal from Canadian uranium mining effluents by a radium-selective ion exchange complexer

    International Nuclear Information System (INIS)

    1984-07-01

    A laboratory test program was initiated by the Department of Energy, Mines and Resources as part of the National Uranium Tailings Program to investigate the applicability of a radium-selective ion exchange complexer for removing radium from Canadian uranium mining effluents. The ion exchange complexer was shown to be efficient in removing radium from contaminated water of uranium mining operations, with the ultimate loading capacity of the resin on one type of water treated being determined as approximately 1,600 Bq/cm 3 of new resin. The results showed that the resin was effective in removing radium but not any other contaminants

  9. Superfund Record of Decision (EPA Region 8): Denver Radium Site Streets, Colorado, March 1986. Final report

    International Nuclear Information System (INIS)

    1986-01-01

    Denver Radium Site Streets is located in Denver, Colorado. The operable unit is comprised of eight street segments in the Cheesman Park area and one segment in the upper downtown area. The nine contaminated street segments are owned by the City and County of Denver and extend approximately 4.5 miles through largely residential areas. The Denver Radium Site Streets contain a 4- to 6-inch layer of radium-contaminated asphalt. The contaminated layer is underlain by compacted gravel road base and is usually overlain by 4 to 12 inches of uncontaminated asphalt pavement. There is an estimated 38,500 cubic yards of contaminated material covering approximately 832,000 square feet. The selected remedial action for the site includes: leaving the contaminated material in place; improving institutional controls; and removing any contaminated material excavated during routine maintenance, repair, or construction activities in the affected streets to a facility approved for storage or disposal of contaminated material

  10. Recent cases of radium-induced malignancy

    International Nuclear Information System (INIS)

    Brues, A.M.

    1978-01-01

    Five cases of malignant disease attributed to radium in patients with measured body burdens have been discovered since 1974, including three bone sarcomas and two mastoid carcinomas. Pertinent findings in these cases are summarized here

  11. Preliminary study of radium-contaminated soils

    Energy Technology Data Exchange (ETDEWEB)

    Healy, J.W.; Rodgers, J.C.

    1978-10-01

    A preliminary study was made of the potential radiation exposures to people from radium-226 contamination in the soil in order to provide guidance on limits to be applied in decontaminating land. Pathways included were inhalation of radium from resuspension; ingestion of radium with foods; external gamma radiation from radium daughters; inhalation of radon and daughter, both in the open air and in houses; and the intake of /sup 210/Pb and /sup 210/Po from both inhalation and ingestion. The depth of the contaminated layer is of importance for external exposure and especially for radon emanation. The most limiting pathway was found to be emanation of the radon into buildings with limiting values comparable to those found naturally in many areas.

  12. Preliminary study of radium-contaminated soils

    International Nuclear Information System (INIS)

    Healy, J.W.; Rodgers, J.C.

    1978-10-01

    A preliminary study was made of the potential radiation exposures to people from radium-226 contamination in the soil in order to provide guidance on limits to be applied in decontaminating land. Pathways included were inhalation of radium from resuspension; ingestion of radium with foods; external gamma radiation from radium daughters; inhalation of radon and daughter, both in the open air and in houses; and the intake of 210 Pb and 210 Po from both inhalation and ingestion. The depth of the contaminated layer is of importance for external exposure and especially for radon emanation. The most limiting pathway was found to be emanation of the radon into buildings with limiting values comparable to those found naturally in many areas

  13. Recent cases of radium-induced malignancy

    International Nuclear Information System (INIS)

    Adams, E.E.

    1984-01-01

    Three cases of malignant disease attributed to radium in patients with measured body burdens have been observed since 1978 - one paranasal sinus carcinoma, one mastoid carcinoma, and one fibrosarcoma of bone. These cases are summarized here. 4 references

  14. Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 2: Materials and coatings

    Science.gov (United States)

    Bhushan, B.; Ruscitto, D.; Gray, S.

    1978-01-01

    Material coatings for an air-lubricated, compliant journal bearing for an automotive gas turbine engine were exposed to service test temperatures of 540 C or 650 C for 300 hours, and to 10 temperature cycles from room temperatures to the service test temperatures. Selected coatings were then put on journal and partial-arc foils and tested in start-stop cycle tests at 14 kPa (2 psi) loading for 2000 cycles. Half of the test cycles were performed at a test chamber service temperature of 540 C (1000 F) or 650 C (1200 F); the other half were performed at room temperature. Based on test results, the following combinations and their service temperature limitations are recommended: HL-800 TM (CdO and graphite) on foil versus chrome carbide on journal up to 370 C (700 F); NASA PS 120 (Tribaloy 400, silver and CaF2 on journal versus uncoated foil up to 540 C (1000 F); and Kaman DES on journal and foil up to 640 C (1200 F). Kaman DES coating system was further tested successfully at 35 kPa (5 psi) loading for 2000 start-stop cycles.

  15. 60NiTi Intermetallic Material Evaluation for Lightweight and Corrosion Resistant Spherical Sliding Bearings for Aerospace Applications, Report on NASA-Kamatics SAA3-1288

    Science.gov (United States)

    Dellacorte, Christopher; Jefferson, Michael

    2015-01-01

    Under NASA Space Act Agreement (SAA3-1288), NASA Glenn Research Center and the Kamatics subsidiary of the Kaman Corporation conducted the experimental evaluation of spherical sliding bearings made with 60NiTi inner races. The goal of the project was to assess the feasibility of manufacturing lightweight, corrosion resistant bearings utilizing 60NiTi for aerospace and industrial applications. NASA produced the bearings in collaboration with Abbott Ball Corporation and Kamatics fabricated bearing assemblies utilizing their standard reinforced polymer liner material. The assembled bearings were tested in oscillatory motion at a load of 4.54 kN (10,000 lb), according to the requirements of the plain bearing specification SAE AS81820. Several test bearings were exposed to hydraulic fluid or aircraft deicing fluid prior to and during testing. The results show that the 60NiTi bearings exhibit tribological performance comparable to conventional stainless steel (440C) bearings. Further, exposure of 60NiTi bearings to the contaminant fluids had no apparent performance effect. It is concluded that 60NiTi is a feasible bearing material for aerospace and industrial spherical bearing applications.

  16. Dosimetry of head carcinomas in radium cases

    International Nuclear Information System (INIS)

    Schlenker, R.A.; Harris, M.J.

    1979-01-01

    Dose rate calculations, combined with observations of tissue dimensions, lead to the conclusion that radon and its daughters in the airspace produce a greater dose rate in the mastoid air cell epithelium, the tissue at risk for mastoid carcinomas in radium cases, than do radium and its daughters in bone. As the conclusion is based on limited tissue data, assumed values for the radioactivity in bone and airspace, and a number of important assumptions, it must be considered tentative

  17. Campaign to gather medical devices containing radium: results

    International Nuclear Information System (INIS)

    Pierre, J.P.; Vidal, J.P.; Martin, J.C.; Pasquier, J.L.

    2002-01-01

    Campaign to gather medical devices containing radium: results. On December 1, 1999, at the request of the French Health Ministry, OPRI and ANDRA launched a campaign to gather medical devices containing radium, formerly used in brachytherapy. This campaign addressed a public health issue because of the risks actually involved in a careless handling of these objects. Moreover the growing number of reported scattered radium medical devices in the last few years reinforced the necessity of the campaign. The gathering was initiated by a call of the owners (hospitals, caring centers, retired doctors or their heirs) to a toll free number. OPRI or ANDRA then appreciated the situation urgency. Priority was given to private people because most of them did not have suitable storage facilities. OPRI teams operated according a strict protocol guaranteeing their own safety, proper procedures and compliance with transport regulations for radioactive materials. 517 objects amounting to an activity of 1.32 x 10 11 Bq have been gathered in 90 operations. Properly packaged they were transported to and safely stored at the CEA Saclay site before their permanent storage in the ANDRA facilities. (author)

  18. Radium - 226 levels in some sudanese plants and soils

    International Nuclear Information System (INIS)

    Sam, A.K.

    1993-01-01

    The natural levels of 226 Ra in plant and soil samples have been studied. The field study was mainly conducted in western Sudan (Darfur and Kurdofan) where areas of high natural background radiation have been identified and Khartoum area was taken as a control to (i) assess in natural setting the soil-to-plant concentration ratios (concentration in dry sample / concentration in dry soil) of the naturally occurring radionuclide 226 Ra, (ii) establish base-line data on Radium activity concentration levels in environmental materials and (iii) explore the area of high natural radiation background in western Sudan.Low level gamma spectrometry, employing high purity germanium detector (HPGe) of relative efficiency 12%, has been used for the determination of 226 Ra activity concentrations in plant and soil samples. The mean Radium activity concentration found in soil ranged from 14.41 Bq/Kg to 79.08 Bq/Kg, the values correspond to the reported normal background levels of 226 Ra in soils worldwide. Radium activity concentrations found in Sudanese plants were significantly higher compared to those related to plants from normal background regions and significantly lower than those reported for plants from high background regions in other countries. The mean soil/plant concentration ratios (CRs) found in this study were 0.12, 0.15, 0.17 and 0.08 for whole plants, fruits and leafy vegetables, root vegetables and grains, respectively. These ranges of CR values are comparable with overall range of CR where environmental conditions are normal. The estimated daily intakes by individuals consuming foods of local origin were 1.00, 10.4 and 7.91 Bq/Day of radium Khour Abu Habil, Arkuri and Dumpir, respectively. Since the dietary habits were different, as it was noticed, these results have been much lower in comparison with those obtained from some European countries and United States. (author), 44 refs., 18 tabs., 13 figs

  19. Ageing of fibre reinforced polymer composite selected as a bearing material for Rams of 540 MWe fuelling machine

    International Nuclear Information System (INIS)

    Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

    2006-01-01

    Fibre-reinforced-polymer-composite material has been suggested as a bearing material to overcome tribological problems witnessed during the testing of Ram assembly of the 540 MWe fuelling machine at RTD. After successful trials at B-Ram the composite material has been adapted for B-RAM, C-Ram and RDB head at fuelling machines being tested at RTD, Hall 7 and at Tarapur. Laboratory evaluations were also carried out at Tribology Lab RTD to study effect of radiation on the composite. Paper deals with the various aspects of life prediction of this material in term of wear and radiation damage. (author)

  20. Personal characteristics relating to radium loss over a decade or more in radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Jansen, A.; Kotek, T.J.

    1986-01-01

    Personal habits and biological characteristics of 42 female Illinois radium workers first employed during the 1920s were analyzed in relationship to radium loss in late adult life. The 42 women met the criteria that they first were examined between 1957 and 1969 and are no longer employed, have had two or more radium body-burden measurements by gamma spectroscopy, 10-year minimum interval exists between initial and final measurements, and exhibit a RaC body burden in 1970 or later of ≥.137 kBQ. High radium body burdens are associated with decreased rates of radium elimination, as previously described. However, the most powerful predictor was coffee/tea consumption, increased consumption being associated with increased rates of radium elimination and explaining ∼35% of the variance. The effect persisted after deletion of smokers and subjects with x-ray evidence of bone damage. Weight/height ratios were positively associated with radium excretion. Individuals smoking cigarettes throughout the study period had significantly low rates of elimination of radium, similar to subjects with x-ray evidence of significant radiation-induced bone damage. Both smokers and subjects with x-ray evidence of radiation damage to bone had low weight/height ratios, suggesting that biological promoters of radiation damage to bone may exist. Rates of radium elimination were significantly associated with (linear) bone density, demonstrating that rates of loss of radium cannot be assumed to be independent of adult or postmenopausal bone density losses. Number of children and age of menopause did not have demonstrable effects on radium elimination. 9 refs., 2 figs., 7 tabs

  1. Personal characteristics relating to radium loss over a decade or more in radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Kotek, T.J.; Jansen, A.

    1987-01-01

    Personal habits and biological characteristics of 42 female Illinois radium workers first employed during the 1920s were analyzed in relationship to radium loss in late adult life. The 42 women met the following criteria: (1) first examined between 1957 and 1969, and no longer employed; (2) two or more radium body-burden measurements by gamma spectroscopy; (3) 10-year minimum interval between initial and final measurements; and (4) a RaC body burden in 1970 or later of ≥0.137 kBq. High radium body burdens were significantly associated with decreased rates of radium elimination; however, the most powerful predictor was coffee/tea consumption (p<.005), increased consumption being associated with increased rates of radium elimination and explaining ∼35% of the variance. The effect persisted after deletion of smokers and subjects with X-ray evidence of bone damage. Weight/height ratios were positively associated with radium excretion (p<.025). Smokers throughout the study period had significantly low rates of elimination of radium, similar to subjects with X-ray evidence of significant radiation-induced bone damage. Both smokers and subjects with X-ray evidence of radiation damage to bone had low weight/height ratios, suggesting that biological promoters of radiation damage to bone may exist. Rates of radium elimination were significantly associated with bone density, demonstrating that rates of loss of radium cannot be assumed to be independent of adult or postmenopausal bone density losses. Parity and age of menopause did not demonstrably affect radium elimination. 7 refs.; 2 figs.; 7 tabs

  2. 40 CFR Appendix Xii to Part 266 - Nickel or Chromium-Bearing Materials that may be Processed in Exempt Nickel-Chromium Recovery...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Nickel or Chromium-Bearing Materials that may be Processed in Exempt Nickel-Chromium Recovery Furnaces XII Appendix XII to Part 266... FACILITIES Pt. 266, App. XII Appendix XII to Part 266—Nickel or Chromium-Bearing Materials that may be...

  3. Radium and uranium concentrations and associated hydrogeochemistry in ground water in southwestern Pueblo County, Colorado

    Science.gov (United States)

    Felmlee, J. Karen; Cadigan, Robert Allen

    1979-01-01

    Radium and uranium concentrations in water from 37 wells tapping the aquifer system of the Dakota Sandstone and Purgatoire Formation in southwestern Pueblo County, Colorado, have a wide range of values and define several areas of high radioactivity in the ground water. Radium ranges from 0.3 to 420 picocuries per liter and has a median value of 8.8, and uranium ranges from 0.02 to 180 micrograms per liter and has a median value of 2.4. Radon concentrations, measured in 32 of the 37 wells, range from less than 100 picocuries per liter to as much as 27,000 and have a median value of 580. Relationships among the radioactive elements and 28 other geochemical parameters were studied by using correlation coefficients and R-mode factor analysis. Five factor groups were determined to represent major influences on water chemistry: (1) short-term solution reactions, (2) oxidation reactions, (3) hydrolysis reactions, (4) uranium distribution, and (5) long-term solution reactions. Uranium concentrations are most strongly influenced by oxidation reactions but also are affected by solution reactions and distribution of uranium in the rocks of the aquifer system. Radon and radium concentrations are mostly controlled by uranium distribution; radium also shows a moderate negative relationship with oxidation. To explain the statistical and spatial relationships among the parameters, a model was developed involving the selective leaching of uranium-bearing phases and metal sulfides which occur in discontinuous zones in sandstone and shale. When reducing conditions prevail, uranium is immobile, but radium can be taken into solution. When faults and associated fractured rocks allow oxidizing conditions to dominate, uranium can be taken into solution; radium can also be taken into solution, or it may become immobilized by coprecipitation with iron and manganese oxides or with barite. Several areas within the study area are discussed in terms of the model.

  4. Radium-226 and radium-228 in shallow ground water, southern New Jersey

    Science.gov (United States)

    Szabo, Zoltan; dePaul, Vincent T.

    1998-01-01

    Concentrations of total radium (the sum of radium-226 and radium-228) and gross alpha-particle activities in drinking water that exceed the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Levels (MCLs) are known to cause cancer. Results of investigations by the U.S. Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection (NJDEP) indicate that concentrations of total radium in water samples from 33 percent of 170 wells in the Kirkwood-Cohansey aquifer system in southern New Jersey exceeded the MCL of 5 pCi/L (picocuries per liter) (fig. 1). Wells containing water in which concentrations of total radium were greater than the MCL typically are found where the Bridgeton Formation crops out, in or near an agricultural area, where ground water is acidic (pH less than 5), and where nitrate concentrations generally exceed 5 mg/L (milligrams per liter). Leaching of nitrogen, calcium, and magnesium from agricultural chemicals (fertilizer, lime) applied to cropland may increase the mobility of radium in ground water. Gross alphaparticle activities exceeded the USEPA MCL of 15 pCi/L in water from 14 percent of 127 wells. A statistically significant 2:1 ratio between gross alpha-particle activity and concentration of total radium indicates that gross alpha-particle activity can be used as a screening tool to predict the presence of water that may have a high total-radium concentration.

  5. Shaft-retort for treating waste materials, like washery waste, bituminous shale, oil-bearing sands and the like

    Energy Technology Data Exchange (ETDEWEB)

    Koppers, H

    1916-10-29

    A shaft-retort for converting waste materials, like washery waste, bituminous shale, oil-bearing sands, brown coal and non-coking mineral coal to oil and tar by supplying heat through the shaft wall formed of an iron-sheet to the material, which is forced through a feeding member perforated for the removal of gases and vapors, and moved downward in a thin layer on the shaft wall; that is characterized by the fact that the iron heating sheet is made rotatable for the purpose of equalizing overheating of itself and the material to be treated.

  6. The use of radium isotopic ratio in groundwater as a tool for pollution source identification

    International Nuclear Information System (INIS)

    Agudo, E.G.; Goncalves, S.; Francisco, J.T.; Shinomiya, C.N.

    1992-01-01

    Radium isotopes in groundwater, with concentration above natural values have been measured near a radioactive material storage facility, with underground sealed concrete reservoirs, containing pasty residues from monazite sand industrial processing. This situation became a problem last decade, because of general public concern with radium contamination as being a consequence of leaks in reservoirs that could spread in the environment the contained radioactivity. There is a general claim against this stored material, because rain and underground water drain into a nearby creek, which flows to a river, that is used for public water supply of Itu city, (Sao Paulo state, Brazil), some 12 km away. (author)

  7. A programme for Euratom safeguards inspectors, used in the assay of plutonium bearing materials by passive neutron interrogation

    International Nuclear Information System (INIS)

    Vocino, V.; Farese, N.; Maucq, T.; Nebuloni, M.

    1991-01-01

    The programme PECC (Passive Euratom Coincidence Counters) has been developed at the Joint Research Center, Ispra by the Euratom Safeguards Directorate, Luxembourg and the Safety Technology Institute, Ispra for the acquisition, evaluation, management and storage of measurements data originating from passive neutron assay of plutonium bearing materials. The software accommodates the implementation of the NDA (Non Destructive Assay) procedures for all types of passive neutron coincidence deployed by the Euratom Safeguards Directorate, Luxembourg

  8. Mineral composition and heavy metal contamination of sediments originating from radium rich formation water.

    Science.gov (United States)

    Bzowski, Zbigniew; Michalik, Bogusław

    2015-03-01

    Radium rich formation water is often associated with fossil fuels as crude oil, natural gas and hard coal. As a result of fossil fuels exploitation high amount of such water is released into environment. In spite of the high radium content such waters create a serious radiation risk neither to humans nor biota directly. First and foremost due to very high mineralization they are not drinkable at all. But after discharge chemical and physical conditions are substantially changed and sediments which additionally concentrated radium are arising. Due to features of technological processes such phenomenon is very intensive in underground coal mining where huge volume of such water must be pumped into surface in order to keep underground galleries dry. Slightly different situation occurs in oil rigs, but finally also huge volume of so called process water is pumped into environment. Regardless their origin arising sediments often contain activity concentration of radium isotopes exceeding the clearance levels set for naturally occurring radioactive materials (NORM) (Council Directive, 2013). The analysis of metals and minerals content showed that besides radioactivity such sediments contain high amount of metals geochemically similar to radium as barium, strontium and lead. Correlation analysis proved that main mechanism leading to sediment creation is co-precipitation radium with these metals as a sulfate. The absorption on clay minerals is negligible even when barium is not present in significant quantities. Owing to very low solubility of sulfates radium accumulated in this way should not migrate into environment in the neighborhood of a site where such sediment were deposited. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. New Jersey Radium Research Project: final report

    International Nuclear Information System (INIS)

    Sharpe, W.D.

    1979-01-01

    Cancers among dead New Jersey subjects were almost three times the expected number. Their radiation experience apparently acted as a generalized carcinogen. Conventional clinical, laboratory and roentgenographic tests neither correlated with calculated radiation exposure nor predicted which subjects subsequently developed cancer. More subjects than expected were deaf and enough of the subjects had increased erythrocyte sedimentation rates and decreased alpha-1 serum globulin levels that both hearing tests and tests of immune competence should be undertaken among asymptomatic exposed populations at regular intervals to see whether these may indicate radiation effects prior to a fatal cancer or blood dyscrasia. If pre-terminal radium-226 burdens validly express total irradiation experience, and past exposure to shorter-lived radium-228 (mesothorium) makes it unlikely that this is so, the distribution of radium osteitis among our subjects suggests that anatomically demonstrable radiation injury occurs in the vast majority of subjects with any radium-226 burden that can be measured above background levels after twenty-five years, and in almost half of those exposed whose measured radium-226 burdens are indistinguishable from background levels. Modification of the occupational exposure standard is recommended

  10. New Jersey Radium Research Project: final report

    Energy Technology Data Exchange (ETDEWEB)

    Sharpe, W.D.

    1979-01-01

    Cancers among dead New Jersey subjects were almost three times the expected number. Their radiation experience apparently acted as a generalized carcinogen. Conventional clinical, laboratory and roentgenographic tests neither correlated with calculated radiation exposure nor predicted which subjects subsequently developed cancer. More subjects than expected were deaf and enough of the subjects had increased erythrocyte sedimentation rates and decreased alpha-1 serum globulin levels that both hearing tests and tests of immune competence should be undertaken among asymptomatic exposed populations at regular intervals to see whether these may indicate radiation effects prior to a fatal cancer or blood dyscrasia. If pre-terminal radium-226 burdens validly express total irradiation experience, and past exposure to shorter-lived radium-228 (mesothorium) makes it unlikely that this is so, the distribution of radium osteitis among our subjects suggests that anatomically demonstrable radiation injury occurs in the vast majority of subjects with any radium-226 burden that can be measured above background levels after twenty-five years, and in almost half of those exposed whose measured radium-226 burdens are indistinguishable from background levels. Modification of the occupational exposure standard is recommended. (PCS)

  11. Conditioning experience for spent radium sources

    International Nuclear Information System (INIS)

    Kang, I. S.; Shon, J. S.; Kim, K. J.; Min, D. K.

    2001-01-01

    In order to avoid accidents that could be resulted from improper storage of spent radium sources, it is necessary to condition and store them safely. The program for safe conditioning of spent radium sources by IAEA has been established to assist the developing countries. The main object of this paper is to apply the technology that was adapted by IAEA for the conditioning the national inventory of Ra-226 sources in member states, as a part of IAEA's project with the Korean expert team. This paper is the result that the Korean expert team carried out spent radium conditioning, under the project title 'Radium Conditioning in Myanmar(INT4131-06646C)'. The whole inventory of spent radium sources 1,429.5mCi, was safely conditioned by the Korean expert team according to the manual under the supervision of IAEA's technical officer and the control of Myanmar authority on behalf of Myanmar. These sources were encapsuled and welded into 27 small capsules and 3 large capsules, and conditioned in 3 lead shields, producing 3 concrete-shielded drums. The inventories were distributed into 3 shielding devices, holding 500mCi, 459.5mCi, and 470mCi

  12. Radium isotopes as a tool for the study of water mixing in the Paraiba do Sul River Estuary

    International Nuclear Information System (INIS)

    Souza, Thaisa Abreu de; Moreira, Isabel M.N.S.; Rezende, Carlos E. de

    2008-01-01

    Four isotopes of radium with different half-lives exist in nature. In aquatic systems, radium isotopes present distinct characteristics in salt water and fresh water environments. In fresh waters, radium appears adsorbed to particulate material while in sea water radium presents a conservative behavior, being the concentration of different isotopes of radium governed by the processes of dilution, advection and diffusion, as well as radioactive decay. The four natural isotopes of radium are tracers extensively used to determine ratios of water mixture and to calculate the period since the radium was added to the water column. The short-lived isotopes, 223 Ra (half-life = 11.4 days) and 224 Ra (half-life = 3.66 days), are continually regenerated from decay of their thorium parents, which are perpetually bound to particles surfaces. On the other hand, the long-lived isotopes, 226 Ra (half-life = 1600 yrs) and 228 Ra (half-life = 5.7 yrs), require considerable time for regeneration. These fluxes must be sustained by input water from rivers, sediments, SGD, or other sources. In the present work, developed at the estuary of the Paraiba do Sul River, the short half-lived radium isotopes ( 224 Ra and 223 Ra) were determined using the technique of coincidence delayed developed. The isotopes of long half-lifed ( 22 26Ra and 22 28Ra) were determined by the technique of total alpha and beta counting, after the dissolution of the MnO 2 fiber used to pre-concentrate radium. (author)

  13. Achievement report for fiscal 1998. Research and development of nano-structural materials for ceramic bearing application (the second year); 1998 nendo seika hokokusho. Ceramic bearing yo nano seigyo zairyo no kenkyu kaihatsu (dai 2 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Development is made on ceramic bearing using high-performance and low-cost nano-structural materials, and its application is performed to high-quality bearings suitable for energy conservation in automobiles and industrial machines, and bearings for office automation devices, electronics, and aeronautic and maritime development. To achieve these goals, raw material synthesizing technologies, forming technologies, structural control technologies, processing technologies and mass production technologies shall be established. Fiscal 1998 had the following achievements: establishment of nano-structure controlled ceramic material powder synthesizing technology (nano-lamination type composite powder made by using the beads mill co-precipitation method, nano-lamination type composite powder made by using the New Mymill co-precipitation method, nano-lamination type composite powder made by using the controlled liquid phase method, composite nano-structured gel, and nano-powder synthesis); near net forming technology for spherical ceramics; high-speed processing technology for ultra smooth surface; evaluation of rolling fatigue properties of ceramic bearings; and analysis and evaluation of nano-structured materials. Since this alumina-based ceramic bearing can be produced at reduced cost with performance comparable to silicon nitride based bearing, investigations and discussions are being given on the application thereof. (NEDO)

  14. Uranium, thorium and radium in soil and crops

    International Nuclear Information System (INIS)

    Evans, S.; Eriksson, Aa.

    1983-06-01

    The distribution of the naturally occuring radionuclides uranium, thorium and radium in soil, plant material and drainage water was evaluated. The plant/soil concentration factors showed that very small fractions of the nuclides were available for the plants. The water/soil concentration factors were calculated; the nuclide content in drainage water generally indicated very low leaching rates. The distribution of the radionuclides was utilized with the aim to obtain reliable concentration factors which in turn could be used to calculate the transfer of nuclides within the agricultural ecosystem. Dose calculations were performed using plant/soil concentration factors based on geometric mean values. (authors)

  15. The environmental behaviour of radium. V.2

    International Nuclear Information System (INIS)

    1990-01-01

    The objective of this publication is to provide an up to date review of the environmental behaviour of radium, including methods for analysis, assessment and control. The need for a reference text on the subject was identified at an early stage of the International Atomic Energy Agency's Co-ordinated Research Programme (CRP) on radium behaviour in relation to uranium mining and milling wastes. This publication deals with the sources, properties, environmental behaviour and the methods of analysis, control and assessment of 226 Ra. It is an outgrowth of Agency programmes directed towards the environmental problems involved in uranium mining and milling. The emphasis in several of the sections reflects these origins. For example, many of the contributions in Volume 2 of this report on technologically enhanced sources of radium (Part 1), methods of control and abatement (Part 2) and the impact on man (Part 3) are concerned with uranium mining and milling. Refs, figs and tabs

  16. Health consequences of nasopharyngeal radium exposure

    International Nuclear Information System (INIS)

    Sandler, D.P.; Matanoski, G.; Comstock, G.W.; Mitchell, T.

    1980-01-01

    The study was undertaken to determine whether a population of children with hearing loss who were irradiated with radium applicators in the forties and fifties would have an increased risk of tumors in the area of the nasopharynx, thyroid, and other surrounding tissues or would have other long-term results of radium treatments such as signs of hormonal changes related to radiation exposure of the pituitary glands. The results of the study of the chronic effects from irradiation of adenoids suggests a significant excess risk of head and neck cancers, especially brain tumors. The increased incidence of thyrotoxicosis in the exposed population may have resulted from hormonal imbalance secondary to pituitary gland irradiation and should receive further study. Chronic hearing loss occurred more frequently in the irradiated group but it is difficult to be sure whether this indicated an ineffectiveness of the treatment or differences in the characteristics of the deafness in individuals selected for radium treatments

  17. Survey of medical radium installations in Wisconsin

    International Nuclear Information System (INIS)

    Tapert, A.C.; Lea, W.L.

    1975-05-01

    A radiation protection survey was performed at 70 medical radium installations in the State of Wisconsin. The requirements of the State's Radiation Protection Code were used as survey criteria. Radiation measurements of radium storage containers, radium capsule leakage tests, and monitoring of work surfaces for contamination were performed. Film badge monitoring data of whole body and extremity doses are presented for 221 individuals at 17 hospitals. Whole body doses during single treatments ranged from 10 to 1360 mrems per individual. The estimate of 500 mrems per treatment was determined as the dose aggregate to hospital personnel. Whole body doses from film badges are compared with analogous TLD doses. Four physicians and six technicians at nine hospitals participated in a study for monitoring the extremities with TLD. Cumulative extremity doses ranged from 28 to 6628 mrems per participant during the study. (U.S.)

  18. The environmental behaviour of radium. V.1

    International Nuclear Information System (INIS)

    1990-01-01

    The objective of this publication is to provide an up to date review of the environmental behaviour of radium, including methods for analysis, assessment and control. The need for a reference text on the subject was identified at an early stage of the International Atomic Energy Agency's Co-ordinated Research Programme (CRP) on radium behaviour in relation to uranium mining and milling wastes, which began in 1976. There were two CRPs: (1) The Source, Distribution, Movement and Deposition of Radium in Inland Waterways and Aquifers (1976-1980; final report: IAEA-TECDOC-301, published in 1984). (2) The Environmental Migration of Radium and Other Contaminants Present in Liquid and Solid Wastes from the Mining and Milling of Uranium (1981-1985; final report: IAEA-TECDOC-370, published in 1986). This publication deals with the sources, properties, environmental behaviour and the methods of analysis, control and assessment of 226 Ra. It is an outgrowth of Agency programmes directed towards the environmental problems involved in uranium mining and milling. The emphasis in several of the sections reflects these origins. For example, many of the contributions in Volume 2 of this report on technologically enhanced sources of radium (Part 1), methods of control and abatement (Part 2) and the impact on man (Part 3) are concerned with uranium mining and milling. In Volume 1, coverage of the natural distribution (Part 2), analytical methods (Part 3), environmental migration (Part 4) and biological uptake (Part 5), is more general. It is likely that the reader will find the information needed on the environmental behaviour of radium in this report, or will at least find references to other, more appropriate, texts contained in it. Refs, figs and tabs

  19. Radiation exposure from radium-226 ingestion

    International Nuclear Information System (INIS)

    Keefer, D.H.; Fenyves, E.J.

    1980-01-01

    The contribution of radium to total radiation exposure resulting from the consumption of natural levels of 226 Ra in several public water supplies in an Oklahoma county was determined. A pilot-level study of total dietary intake indicated that the culinary use of water anomalously high in radium and the consumption of water-based beverages contributed significantly to radiation exposure. The mean dietary intake of 226 Ra was 20.6 pCi/day in one community and resulted in an estimated bone dose of 310 mrem/year

  20. Track detection methods of radium measurements

    International Nuclear Information System (INIS)

    Somogyi, G.

    1986-06-01

    The principles of tack formation and processing including the description of etching and etch-track evaluation for the preferably used plastic track detectors are discussed. Measuring methods to determine 226 Ra activity based either on the mapping of alpha-decaying elements in the complete U-Ra series by alpha-radiography, or on the measurement of uranium alone by neutron induced fissionography, or on the alpha-decay measurement of 222 Rn, the first daughter element of radium, and finally on the measurement of alpha-tracks originating from radium itself, which is separated from its parent nuclides are described in detail. (V.N.)

  1. Microbial accumulation of uranium, radium, and cesium

    International Nuclear Information System (INIS)

    Strandberg, G.W.; Shumate, S.E. II; Parrott, J.R. Jr.; North, S.E.

    1981-05-01

    Diverse microbial species varied considerably in their ability to accumulate uranium, cesium, and radium. Mechanistic differences in uranium uptake by Saccharomyces cerevisiae and Pseudomonas aeruginosa were indicated. S. serevisiae exhibited a slow (hours) surface accumulation of uranium which was subject to environmental factors, while P. aeruginosa accumulated uranium rapidly (minutes) as dense intracellular deposits and did not appear to be affected by environmental parameters. Metabolism was not required for uranium uptake by either organism. Cesium and radium were concentrated to a considerably lesser extent than uranium by the several species tested

  2. Protease-Sensitive Liposomes in Chemotherapy & Chemoradiotherapy: From Material Development to In Vivo Application in Tumor-Bearing Mice

    DEFF Research Database (Denmark)

    Brogaard, Rikke Yding; Melander, Fredrik

    to enhance therapeutic efficacies. In this thesis, the development, characterization, and evaluation of an advanced liposomal DDS and its potential in chemoradiotherapy is presented from material development to in vivo application in tumor*bearing mice. In the first part of the thesis, we report the design...... concept of the liposomal DDS, which leads to rapid cellular uptake. Various lipid compositions are tested in uptake and cytotoxicity experiments in vitro, followed by in vivo experiments where the ability of the liposomal DDS to accumulate in tumors together with its anti*cancer activity is explored...... in tumor*bearing mice. The in vivo data demonstrates superior anti*cancer activity relative to the free drug and to conventional, long circulating liposomes. This indicates that the MMP*sensitive liposomal DDS holds potential in therapeutic applications. In the second part of the thesis, the potential...

  3. Superfund Record of Decision (EPA Region 2): Glen Ridge Radium, NJ. (First Remedial Action), June 1989

    International Nuclear Information System (INIS)

    1989-01-01

    The Glen Ridge Radium site is in the Borough of Glen Ridge and the town of East Orange in Essex County, New Jersey. The soil at the site is contaminated to varying degrees with radioactive waste materials suspected to have originated from radium processing or utilization facilities located nearby during the early 1900s. Temporary radon ventilation systems and gamma-radiation shielding have been installed and maintained by EPA and the State to reduce indoor exposures. The primary contaminant of concern affecting the soil and structures in radium 226 which delays to radon gas. The selected remedial action includes excavation of approximately 41,000 cu yd of highly contaminated soil and an unspecified amount of debris followed by offsite disposal; installation and maintenance of indoor engineering controls at less contaminated properties; environmental monitoring to ensure remedy effectiveness; and continuation of a treatment technology study for future actions

  4. Radium balance in discharge waters from coal mines in Poland the ecological impact of underground water treatment

    International Nuclear Information System (INIS)

    Chalupnik, S.; Wysocka, M.

    2008-01-01

    Saline waters from underground coal mines in Poland often contain natural radioactive isotopes, mainly 226 Ra from the uranium decay series and 228 Ra from the thorium series. More than 70% of the total amount of radium remains underground as radioactive deposits due to spontaneous co-precipitation or water treatment technologies, but several tens of MBq of 226 Ra and even higher activity of 228 Ra are released daily into the rivers along with the other mine effluents from all Polish coal mines. Mine waters can have a severe impact on the natural environment, mainly due to its salinity. Additionally high levels of radium concentration in river waters, bottom sediments and vegetation were also observed. Sometimes radium concentrations in rivers exceeded 0.7 kBq/m 3 , which was the permitted level for wastewaters under Polish law. The investigations described here were carried out for all coal mines and on this basis the total radium balance in effluents has been calculated. Measurements in the vicinity of mine settling ponds and in rivers have given an opportunity to study radium behaviour in river waters and to assess the degree of contamination. For removal of radium from saline waters a method of purification has been developed and implemented in full technical scale in two of Polish coal mines. The purification station in Piast Colliery was unique, the first underground installation for the removal of radium isotopes from saline waters. Very good results have been achieved - approximately 6 m 3 /min of radium-bearing waters were treated there, more than 100 MBq of 226 Ra and 228 Ra remained underground each day. Purification has been started in 1999, therefore a lot of experiences have been gathered during this period. Since year 2006, a new purification station is working in another colliery, Ziemowit, at the level -650 meters. Barium chloride is used as a cleaning , agent, and amount of water to be purified is reaching 9 m 3 /min. Technical measures such as

  5. Superelastic Ball Bearings: Materials and Design to Avoid Mounting and Dismounting Brinell Damage in an Inaccessible Press-fit Application-. II; Detailed Analysis

    Science.gov (United States)

    Howard, S. Adam; Dellacorte, Christopher

    2015-01-01

    Rolling element bearings utilized in precision rotating machines require proper alignment, preload, and interference fits to ensure overall optimum performance. Hence, careful attention must be given to bearing installation and disassembly procedures to ensure the above conditions are met. Usually, machines are designed in such a way that bearings can be pressed into housings or onto shafts through the races without loading the rolling elements. However, in some instances, either due to limited size or access, a bearing must be installed or removed in such a way that the load path travels through the rolling elements. This can cause high contact stresses between the rolling elements and the races and introduces the potential for Brinell denting of the races. This paper is a companion to the Part I paper by the authors that discusses material selection and the general design philosophy for the bearing. Here, a more in-depth treatment is given to the design of a dent-resistant bearing utilizing a superelastic alloy, 60NiTi, for the races. A common bearing analysis tool based on rigid body dynamics is used in combination with finite element simulations to design the superelastic bearing. The primary design constraints are prevention of denting and avoiding the balls riding over the edge of the race groove during a blind disassembly process where the load passes through the rolling elements. Through an iterative process, the resulting bearing geometry is tailored to improve axial static load capability compared to a deep-groove ball bearing of the same size. The results suggest that careful selection of materials and bearing geometry can enable blind disassembly without damage to the raceways, which is necessary in the current application (a compressor in the International Space Station Environmental Control and Life Support System), and results in potential design flexibility for other applications, especially small machines with miniature bearings.

  6. Radium, for the best and the worst

    International Nuclear Information System (INIS)

    Boudia, S.

    1998-01-01

    This digest paper describes how radium became a common constituent of consumer products (medicines, beauty creams, soaps, tooth-pastes, mineral waters etc..) a few years after its discovery. Its use in France was prohibited only in the 1970's. (J.S.)

  7. Conditioning technology of spent radium sources

    International Nuclear Information System (INIS)

    Kang, Il Sik; Kim, K. J.; Jang, K. D.

    2001-03-01

    In order to avoid accidents that could be resulted from improper storage of spent radium sources, it is necessary to condition and store them safely. The program for safe conditioning of spent radium sources by IAEA has been established to assist the developing countries. The main object of this report is to understand well and apply the technology that was applied in conditioning the national inventory of Ra-226 sources in Myanmar, as a part of IAEA's project by the Korean expert team. The report is the result that the Korean expert team carried out in Myanmar under the project title 'Radium Conditioning Service in Myanmar(INT4131-06646C)'. As a result of the mission, a whole inventory, 1,429.5 mCi of spent radium sources was safely conditioned by the Korean expert team according to the manual under the supervision of IAEA's technical officer, Mr. Al-Mughrabi, and under the control of DAE authority. These sources were encapsuled in 27 small capsules and 3 large capsules, and conditioned in 3 lead shields, producing 3 packages. The inventories were distributed into 3 shielding devices, holding 500, 459.5, and 470 mCi

  8. Removal method of radium in mine water by filter sand

    International Nuclear Information System (INIS)

    Taki, Tomihiro; Naganuma, Masaki

    2003-01-01

    Trace radium is contained in mine water from the old mine road in Ningyo-Toge Environmental Engineering Center, JNC. We observed that filter sand with hydrated manganese oxide adsorbed radium in the mine water safely for long time. The removal method of radium by filter sand cladding with hydrated manganese oxide was studied. The results showed that radium was removed continuously and last for a long time from mine water with sodium hypochlorite solution by passing through the filter sand cladding with hydrated manganese. Only sodium hypochlorite solution was used. When excess of it was added, residue chlorine was used as chlorine disinfection. Filter sand cladding with hydrated manganese on the market can remove radium in the mine water. The removal efficiency of radium is the same as the radium coprecipitation method added with barium chloride. The cost is much lower than the ordinary methods. Amount of waste decreased to about 1/20 of the coprecipitation method. (S.Y.)

  9. Bone sarcoma in humans induced by radium: A threshold response?

    International Nuclear Information System (INIS)

    Rowland, R.E.

    1996-01-01

    The radium 226 and radium 228 have induced malignancies in the skeleton (primarily bone sarcomas) of humans. They have also induced carcinomas in the paranasal sinuses and mastoid air cells. There is no evidence that any leukemias or any other solid cancers have been induced by internally deposited radium. This paper discuses a study conducted on the dial painter population. This study made a concerted effort to verify, for each of the measured radium cases, the published values of the skeletal dose and the initial intake of radium. These were derived from body content measurements made some 40 years after the radium intake. Corrections to the assumed radium retention function resulted in a considerable number of dose changes. These changes have changed the shape of the dose response function. It now appears that the induction of bone sarcomas is a threshold process

  10. Origin of radium in high-mineralised waters

    International Nuclear Information System (INIS)

    Wiegand, J.W.; Sebastian, F.

    2002-01-01

    High-mineralised waters are showing frequently high concentrations of 226 Ra and 228 Ra, which are positively correlated with salinity. The investigated pit water is a high mineralised, reducing NaCl-brine (up to 230 g/l), which contains in coexcidence with Ba (up to 2500 ppm) and Sr, high 226 Ra concentrations (up to 63 Bq/l) and 228 Ra concentrations (up to 28 Bq/l). Feeding river systems with this water, the contact of the pit water with sulphate bearing surface water results in a precipitation of Ba and Ra as radiobaryte, with 226 Ra concentrations up to several tens of kBq/kg. The pit waters originate from a mixture of formation and meteoric waters, older than 20 Ma. High concentrations of mainly Na + and C1 - , but K + , Ca 2+ and HCO 3 - as well, are explained by dissolution of Permian salt deposits. Ba 2+ is enriched by sulphate-reducing bacteria, which destroy detrital baryte. Radium enters the water by leaching and alpha-recoil effect, but a large fraction of it is adsorbed at the surfaces of mineral grains. Mainly Ba 2+ and Sr 2+ , but univalent ions like Na + and K + as well, are desorbing Ra 2+ from the surface of minerals and take their place. Elution experiments show that beside the ion exchange of the cations, the type and amount of anions control the radium mobilisation. It seems that large anions like NO 3 - are disturbing the hydrate coat around minerals and therefore, enhance the ion exchange process. (author)

  11. Effect of a self-adhesive coating on the load-bearing capacity of tooth-coloured restorative materials.

    Science.gov (United States)

    Bagheri, R; Palamara, Jea; Mese, A; Manton, D J

    2017-03-01

    The aim of this study was to compare the flexural strength and Vickers hardness of tooth-coloured restorative materials with and without applying a self-adhesive coating for up to 6 months. Specimens were prepared from three resin composites (RC), two resin-modified glass-ionomer cements (RM-GIC) and two conventional glass-ionomer cements (CGIC). All materials were tested both with and without applying G-Coat Plus (GCP). Specimens were conditioned in 37 °C distilled deionized water for 24 h, and 1, 3 and 6 months. The specimens were strength tested using a four-point bend test jig in a universal testing machine. The broken specimen's halves were used for Vickers hardness testing. Representative specimens were examined under an environmental scanning electron microscope. Data analysis showed that regardless of time and materials, generally the surface coating was associated with a significant increase in the flexural strength of the materials. Applying the GCP decreased the hardness of almost all materials significantly (P < 0.05) and effect of time intervals on hardness was material dependent. The load-bearing capacity of the restorative materials was affected by applying self-adhesive coating and ageing. The CGIC had significantly higher hardness but lower flexural strength than the RM-GIC and RC. © 2016 Australian Dental Association.

  12. Investigation on the Mechanical and Tribological Properties of Aluminium-Tin Based Plain Bearing Material

    Directory of Open Access Journals (Sweden)

    T. Rameshkumar

    2010-06-01

    Full Text Available The purpose of this study is to investigate the Mechanical and Tribological properties of plain bearing alloys used especially in internal combustion engines. The mechanical properties namely Tensile strength and Hardness were investigated according to standard procedure. The sliding friction and wear properties of aluminium-tin alloy against high carbon high chromium steel were investigated at different normal loads as (29.43 N, 33.35 N and 36.25 N. Tests were carried in oil lubricated conditions with a sliding speed of 1 m/s. Prior to experimentation, the circulating engine oil 20w40 was heated to temperature of 800C using heater. The frictional behavior and wear property of aluminium-tin alloy were studied by means of pin-on-disk tribometer. The weight loss of the specimen was measured and wear and friction characteristics were calculated with respect to time, depth of wear track, sliding speed and bearing load. To determine the wear mechanism, the worn surfaces of the samples were examined using Scanning Electron Microscope (SEM. The optimum wear reduction was obtained at different normal loads and at same sliding speed.

  13. Co-precipitation of radium with barium and strontium sulfate and its impact on the fate of radium during treatment of produced water from unconventional gas extraction.

    Science.gov (United States)

    Zhang, Tieyuan; Gregory, Kelvin; Hammack, Richard W; Vidic, Radisav D

    2014-04-15

    Radium occurs in flowback and produced waters from hydraulic fracturing for unconventional gas extraction along with high concentrations of barium and strontium and elevated salinity. Radium is often removed from this wastewater by co-precipitation with barium or other alkaline earth metals. The distribution equation for Ra in the precipitate is derived from the equilibrium of the lattice replacement reaction (inclusion) between the Ra(2+) ion and the carrier ions (e.g., Ba(2+) and Sr(2+)) in aqueous and solid phases and is often applied to describe the fate of radium in these systems. Although the theoretical distribution coefficient for Ra-SrSO4 (Kd = 237) is much larger than that for Ra-BaSO4 (Kd = 1.54), previous studies have focused on Ra-BaSO4 equilibrium. This study evaluates the equilibria and kinetics of co-precipitation reactions in Ra-Ba-SO4 and Ra-Sr-SO4 binary systems and the Ra-Ba-Sr-SO4 ternary system under varying ionic strength (IS) conditions that are representative of brines generated during unconventional gas extraction. Results show that radium removal generally follows the theoretical distribution law in binary systems and is enhanced in the Ra-Ba-SO4 system and restrained in the Ra-Sr-SO4 system by high IS. However, the experimental distribution coefficient (Kd') varies widely and cannot be accurately described by the distribution equation, which depends on IS, kinetics of carrier precipitation and does not account for radium removal by adsorption. Radium removal in the ternary system is controlled by the co-precipitation of Ra-Ba-SO4, which is attributed to the rapid BaSO4 nucleation rate and closer ionic radii of Ra(2+) with Ba(2+) than with Sr(2+). Carrier (i.e., barite) recycling during water treatment was shown to be effective in enhancing radium removal even after co-precipitation was completed. Calculations based on experimental results show that Ra levels in the precipitate generated in centralized waste treatment facilities far

  14. Evolution of ore-bearing material sources of endogenous uranium deposits

    International Nuclear Information System (INIS)

    Kazansk, V.I.; Laverov, N.P.; Tugarinov, A.I.

    1976-01-01

    Considered are the regularities of changes in types and conditions of uranium deposit formation in connection with the general development of the earth crust tectonic structures. Out of pre-Kembrian uranium deposits considered are Vitwatersrand conglomerates, hydrothermal deposits in pre-Kembrian iron quartzites in the areas of regional fractures in exocontacts of big multiphase granitoid massifs of Proterozoic age and in the fundament folded structures. The hydrothermal-metamorphogen theory is supported of the origin of uranium-bearing sodium metasomatite of Proterozoic, including uranium deposits in the area of the Atabaska lake. Four genetic classes of Palaeozoic deposits are considered. Four periods are singled out in the development of Palaeozoic uranium provinces. Most of the Palaeozoic deposits are shown to be of polygenous origin. Mesozoic deposits are also polygenous, but the combination of ore substance sources in them is more complex

  15. From the Lost Radium Files: Misadventures in the Absence of Training, Regulation, and Accountability

    Energy Technology Data Exchange (ETDEWEB)

    Aronowitz, Jesse N., E-mail: jesse.aronowitz@umassmemorial.org [Department of Radiation Oncology, University of Massachusetts Medical School, Worcester, Massachusetts (United States); Lubenau, Joel O. [Department of Radiation Oncology, University of Massachusetts Medical School, Worcester, Massachusetts (United States)

    2012-11-15

    Purpose: Radium was the foundation of brachytherapy in the early decades of the 20th century. Despite being a most precious and perilous substance, it was mislaid with surprising frequency. This essay explores how it was lost, the efforts taken to recover it, and measures instituted to prevent mishandling. Methods and Materials: Review of contemporary literature, government publications, archives, and lay press. Results: Radium is a particularly dangerous substance because of its long half-life, its gaseous daughter (radon), and the high-energy emissions of its decay products. Despite the hazard, it was unregulated for most of the century. Any physician could obtain and administer it, and protocols for safe handling were generally lacking. Change came with appreciation of the danger, regulation, mandated training, and the institution of a culture of accountability. Unfortunately, careless management of medical radionuclides remains a global hazard. Conclusion: Responsible stewardship of radioactive material was not a high priority, for practitioners or the federal government, for much of the 20{sup th} century. As a result, large quantities of radium had gone astray, possibly subjecting the general public to continued radiation exposure. Lessons from the radium era remain relevant, as medical radionuclides are still mishandled.

  16. Superelastic Ball Bearings: Materials and Design to Avoid Mounting and Dismounting Brinell Damage in an Inaccessible Press-Fit Application-. I ; Design Approach

    Science.gov (United States)

    Dellacorte, Christopher; Howard, S. Adam

    2015-01-01

    Ball bearings require proper fit and installation into machinery structures (onto shafts and into bearing housings) to ensure optimal performance. For some applications, both the inner and outer race must be mounted with an interference fit and care must be taken during assembly and disassembly to avoid placing heavy static loads between the balls and races otherwise Brinell dent type damage can occur. In this paper, a highly dent resistant superelastic alloy, 60NiTi, is considered for rolling element bearing applications that encounter excessive static axial loading during assembly or disassembly. A small (R8) ball bearing is designed for an application in which access to the bearing races to apply disassembly tools is precluded. First Principles analyses show that by careful selection of materials, raceway curvature and land geometry, a bearing can be designed that allows blind assembly and disassembly without incurring raceway damage due to ball denting. Though such blind assembly applications are uncommon, the availability of bearings with unusually high static load capability may enable more such applications with additional benefits, especially for miniature bearings.

  17. Applications of Radium Isotopes to Ocean Studies

    Energy Technology Data Exchange (ETDEWEB)

    Moore, W. S. [Department of Earth and Ocean Sciences, University of South Carolina, Columbia, SC (United States)

    2013-07-15

    With half-lives ranging from 3.7 days to 1600 a, naturally occurring radium isotopes have been used to study a variety of processes in the ocean. New techniques, which allow rapid analyses of the short lived isotopes, {sup 224}Ra (half-life = 3.7 days) and {sup 223}Ra (half-life = 11 days), have lead to many novel ways to apply radium to oceanography. This paper will focus on how the use of these isotopes has led to breakthroughs in quantifying: (1) the residence time of water in estuaries, (2) coastal ocean mixing rates and (3) submarine groundwater discharge (SGD). With this new understanding of rates and fluxes in the near shore environment, scientists and coastal managers are now able to evaluate sources of nutrients, carbon, and metals and their impact on the coastal ocean. For example, it is now known that SGD rivals rivers as a nutrient source to many coastal environments. (author)

  18. Radium therapy for carcinoma of the tongue

    International Nuclear Information System (INIS)

    Matsuura, Shizumi; Makino, Sohtaro; Satake, Bunsuke; Takahashi, Keiichi; Sakaino, Kohji; Nakajima, Nobuaki

    1984-01-01

    Results of radium therapy with or without multi-disciplinary treatment for carcinoma of the tongue were studied in 117 patients treated from 1973 to 1981 at Gunma Cancer Center. 1. The patients were classified according to the TNM classification of UICC (1978). Seventeen patients were T1, 42 were T2, 31 were T3, 27 were T4, 92 were NO, 18 were N1, 2 were N2 and 5 were N3. 2. The treatment methods included external irradiation with 1,000-2,000 rads by 6MV X-ray followed by radium interstitial implants of 6,000-8,000 rads in 93 patients (73.9 per cent), radium therapy with additional Bleomycin 45-60 mg in 24 patients (20.5 per cent), and cryosurgery in 3 patients. 3. The five year survival rate was 41.6 per cent; 100.0 per cent for T1, 50.0 per cent for T2, 38.8 per cent for T3 and 10.5 per cent for T4. The overall five-year cumulative survival rate was 46.9 per cent. For primary lesions of T3 or T4, greater efforts should be made with combined modalities, such as planned multi-disciplinary treatments with combined radiation and major surgery. (author)

  19. Immunological studies in the human radium population

    International Nuclear Information System (INIS)

    Lloyd, E.L.; Menon, M.

    1976-01-01

    Sera from patients carrying high body burdens of radium were evaluated by indirect immunofluorescence for antibodies reactive with tissue culture cell lines derived from five osteosarcomas and one malignant melanoma. These were compared with the sera from normal controls and patients with sarcomas and other malignancies. No significant difference could be detected between the number of reactions seen with the radium patients and the controls. By contrast, cross reactions between sera from all the tumor patients tested were greatly increased over the controls. With one osteosarcoma cell line, RPMI-41, 11 out of 12 of the tumor patients' sera reacted compared with 6 out of 17 for the controls. In addition, 30 out of 32 of the tumor patients' sera reacted with the malignant melanoma cell line compared with only 3 out of 12 for the controls. This suggests that if serum from a radium patient could be shown to cross react with a large number of carefully selected cell lines, the presence of a tumor might be suspected

  20. Remedial action of radium contaminated residential properties

    International Nuclear Information System (INIS)

    White, D.; Eng, J.

    1986-01-01

    Since November 1983, the New Jersey Department of Environmental Protection (NJDEP) and the US Environmental Protection Agency (USEPA) have been in the process of identifying properties in Montclair, Glen Ridge and West Orange, New Jersey, which were built over radium contaminated soil landfilled areas. Elevated indoor radon concentrations prompted the Centers for Disease Control (CDC) to issue a health advisory which included permanent remediation of radon progeny levels in excess of 0.02 Working Levels within two years of discovery. In order to expedite remedial action, NJDEP undertook a ten million dollar cleanup program. Remedial Action at the 12 residential properties encountered some unanticipated problems despite the efforts of numerous government agencies and their contractors to characterize the contamination as much as possible prior to remediation. Some of the unanticipated issues include contamination from other radionuclides, underestimation of removal volumes, and controversy over the transportation and disposal of the radium contaminated soil at a commercial facility in Nevada. This paper will review the approach taken by NJDEP to the remedial action for radium contaminated soil, discuss some of the issues encountered during the remedial action, and provide post remedial action data

  1. Factors affecting radium removal using mixed iron-manganese oxides

    International Nuclear Information System (INIS)

    Mott, H.V. Singh, S.; Kondapally, V.R.

    1993-01-01

    Batch experiments confirmed that sorption of radium by a mixed iron-manganese oxide solid phase shows promise for treating radium-contaminated water. The capacities of these mixed oxides for sorption of radium depend on the composition of the solid phase, the pH of the aqueous solution, and the presence of competing cations. The removal of the oxide-radium complexes from aqueous suspension by manganese greensand filtration was also investigated. It was found that influent radium concentrations of 100 pCi/L were reduced to 2--9 pCi/L by this process. Additional study of the fate of radium in manganese greensand filters is recommended before this procedure is used for drinking water treatment

  2. Factors affecting radium removal using mixed iron-manganese oxides

    Energy Technology Data Exchange (ETDEWEB)

    Mott, H.V. Singh, S.; Kondapally, V.R. (South Dakota School of Mines and Technology, Rapid City, SD (United States))

    1993-10-01

    Batch experiments confirmed that sorption of radium by a mixed iron-manganese oxide solid phase shows promise for treating radium-contaminated water. The capacities of these mixed oxides for sorption of radium depend on the composition of the solid phase, the pH of the aqueous solution, and the presence of competing cations. The removal of the oxide-radium complexes from aqueous suspension by manganese greensand filtration was also investigated. It was found that influent radium concentrations of 100 pCi/L were reduced to 2--9 pCi/L by this process. Additional study of the fate of radium in manganese greensand filters is recommended before this procedure is used for drinking water treatment.

  3. Characterization of Uranium-Bearing Material by Passive Non-Destructive Gamma Spectrometry

    International Nuclear Information System (INIS)

    Lakosi, L.; Zsigrai, J.; Nguyen, C.T.

    2009-01-01

    Characterization of nuclear materials is equally important in nuclear safeguards (inventory verification) and in nuclear security (revealing illicit trafficking). Analysis of materials is a key issue in both fields. Natural (NU), depleted (DU), low-enriched (LEU), and high-enriched uranium (HEU) samples were analysed by high resolution gamma spectrometry (HRGS). Isotopic composition and total U-content of reactor fuel pellets and powder were determined. A unique HRGS method was developed for the first time for determining the production date of the material of unknown origin. Identifying reprocessed uranium proved to be possible by HRGS as well.

  4. Effective electroluminescent materials for OLED applications based on lanthanide 1.3-diketonates bearing pyrazole moiety

    Energy Technology Data Exchange (ETDEWEB)

    Taydakov, Ilya V. [D. Mendeleyev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow (Russian Federation); P. N. Lebedev Institute of Physics of RAS, Leninskiy pr-t, 53, 119991 Moscow (Russian Federation); Akkuzina, Alina A.; Avetisov, Roman I.; Khomyakov, Andrew V.; Saifutyarov, Rasim R. [D. Mendeleyev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow (Russian Federation); Avetissov, Igor Ch., E-mail: igor_avetisov@mail.ru [D. Mendeleyev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow (Russian Federation)

    2016-09-15

    A series of new pyrazole substituted 1.3-diketones bearing fluorinated alkyl groups were prepared and systematically explored as a ligands for the preparation of luminescent complexes with Eu(III) ion. First triplet levels energy values (T1) of above mentioned ligands were determined by low temperature (77K) phosphorescent spectra measurements of Gd(III) complexes. It was found that 4,4,5,5,6,6,6-heptafluoro-1-(1-methyl-1H-pyrazol-4-yl)hexane-1,3-dione is a superior ligand for synthesis of highly luminescent Eu (III) complexes with 1.10-phenanthroline or similar Lewis bases as auxiliary ligands. The complexes are sufficiently thermal stable, transparent, volatile in high vacuum and soluble in common solvents which make possible to produce OLEDs by dry and wet technology. OLED structures fabricated on the base of the above Eu(III) complexes demonstrated the higher energy efficacy comparing to the standard Eu(TTA){sub 3}(Phen) phosphor.

  5. A study of TiN-coated metal-on-polymer bearing materials for hip prosthesis

    Science.gov (United States)

    Lee, Sung Bai; Choi, Jin Young; Park, Won Woong; Jeon, Jun Hong; Won, Sung Ok; Byun, Ji Young; Lim, Sang Ho; Han, Seung Hee

    2010-08-01

    The TiN-coated metal-on-polymer hip prosthetic pair has the potential to reduce wear debris of UHMWPE (ultra-high molecular weight polyethylene) and to prevent metallic-ion-induced cytotoxicity. However, high quality and adherent film is a key to the clinical success of hip prostheses. In this study, titanium nitride (TiN) films were deposited on stainless steel using plasma immersion ion implantation & deposition (PIII&D) technique to create high-quality film and an adherent interface. The chemical state and composition were analyzed by X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and energy dispersive spectroscopy (EDS). The mechanical properties of the films were characterized using a micro-hardness tester and a pin-on-disk wear tester, and an x-ray diffractometer (XRD) was used for a crystallographic analysis. The PIII&D-treated TiN films showed a stoichiometric and (200) preferred orientation and micro-hardness up to 150 % higher than untreated film. A TiN-coated specimen using the PIII&D process also showed less UHMWPE wear compared to untreated specimens. The volumetric wear rate of UHMWPE could be reduced by as much as 42 % compared to when Co-Cr alloy was used. The results of this study show that advanced TiN-coating via the PIII&D process is a viable means of reducing UHMWPE wear in the metal-on-polymer bearing couple.

  6. Uranium in phosphorus-bearing raw materials and technological problems of its recovery

    Energy Technology Data Exchange (ETDEWEB)

    Gorecki, H; Gorecka, H [Politechnika Wroclawska (Poland)

    1981-01-01

    A problem of uranium recovery from phosphorus-bearinq raw materials is discussed. The different methods of uranium recovery from extractive phosphoric acid are briefly described. The information on their applications in the industry is also given.

  7. Investigation of the Effect of Recycled Asphalt Pavement Material on Permeability and Bearing Capacity in the Base Layer

    Directory of Open Access Journals (Sweden)

    Ayşegül Güneş Seferoğlu

    2018-01-01

    Full Text Available The purpose of this research was to investigate the effects of recycled asphalt pavement (RAP and cement content on the permeability and bearing capacity characteristics of aggregate base courses. Mixtures containing untreated RAP ranging between 0 and 100 percent and 1, 2, and 3% cement-treated RAP were subjected to laboratory tests (bitumen content, sieve analysis, modified proctor, soaked California bearing ratio (CBR, and constant-level permeability tests. The results showed that, as the RAP percentage in the mixture increased, CBR values decreased considerably. Moreover, there is a linear increase in the CBR values with cement treatment. Optimum moisture contents (OMC and maximum dry densities (MDD showed a decreasing trend. Increasing the cement percentages in 100% RAP blend increases the OMC and MDD values. The permeability of RAP showed a decrease as the percentage of RAP and cement increased in blends. The study showed that the CBR value of the 20% RAP blend is also obtained in the 100% RAP/3% cement-treated blend. Thus, it has been understood that cement is a suitable material in order to increase the use of RAP. In addition, the increase in the percentage of RAP and cement made the base course more impermeable.

  8. Radium and thorium with barium in micronodules of cattle thyroids

    International Nuclear Information System (INIS)

    Van Middlesworth, L.

    1980-01-01

    Radium isotopes were found concentrated in thyroid glands of cattle. The incidence of measurable radium varied from 80% to less than 0.1% in thyroids from different abattoirs. The radium was concentrated in microscopic bodies containing predominantly barium and sulfur and lying within the storage of thyroglobulin, adjacent to follicular cells. Some thyroid cells may receive biologically significant doses of alpha radiation from these sources

  9. Reverse osmosis separation of radium from dilute aqueous solutions

    International Nuclear Information System (INIS)

    Subramanian, K.S.; Sastri, V.S.

    1980-01-01

    Porous cellulose acetate membranes obtained from Osmonics Inc. were characterized in terms of pure water permeability constant, solute transport parameter, and mass transfer coefficient with aqueous sodium chloride solution as the reference system. Reverse osmosis separation behavior of radium-226 as nitrate, chloride, and sulfate salts was studied. Reverse osmosis method of removing radium-226 from aqueous solutions has been compared with other methods, and it has been shown to be one of the best methods for alleviating radium contamination problems

  10. DEVELOPMENT AND RESEARCH OF THE MODIFIED WHITE METAL MATERIAL WITH THE PURPOSE OF ITS USE AT REPAIR OF HEAVY-LOADED BEARINGS OF SLIPPING

    Directory of Open Access Journals (Sweden)

    A. V. Alifanov

    2012-01-01

    Full Text Available The paper shows that wear resistance of new modified babbit material (MBM is by an order of magnitude higher than that of the Б83 State Standard 1320-74 standard babbit material. Therefore, the latter can be recommended for restoration of sliding bearings that are used in gascompressor units.

  11. Radium behaviour during ferric oxi-hydroxides crystallization

    International Nuclear Information System (INIS)

    Bassot, S.; Stammose, D.; Benitah, S.

    2004-01-01

    In uranium mill tailings, oxides and oxi-hydroxides are responsible of about 70% of the radium immobilization, half being associated to amorphous forms (mainly hydrous ferric oxides and hydrous manganese oxides). With time, crystallization of these amorphous forms can occur, inducing a redistribution of radium between solid and solution. If the amount of mobile radium increases, the impact of these tailings on the environment may become significant. The aim of this study is to determine the amount of radium released in solution during the crystallization process of hydrous ferric oxide (HFO). The transformation of Ra-HFO co-precipitate in crystallized forms (goethite, hematite, is studied by ageing at 40 deg C for different solution compositions. Both solids and solutions are sampled for different times and analysed. The solid evolution is followed by specific area measurements (about 250 m2/g for HFO and about 10-20 m 2 /g for crystallized form) and by determination of the amorphous fraction according to a selective extraction procedure. The solutions were analysed for 226 radium activity, iron concentration and pH. In order to discriminate the part of radium included in the solid and the part of radium fixed on the solid surface, radium sorption onto HFO and crystallized forms is studied as a function of pH. The modelling of the sorption curves with JCHESS 2.0 code allow to point out the mechanisms responsible of the 226-radium distribution between solid and solution during the crystallization process of HFO. (author)

  12. Radium: a miracle cure{exclamation_point} (invited paper)

    Energy Technology Data Exchange (ETDEWEB)

    Genet, M

    1998-07-01

    In 1896, the general population had little enthusiasm for the recent discovery of radioactivity by Henri Becquerel. There was certainly much less than for X rays which had appeared, 3 months earlier, as a 'magic radiation'. However, polonium and radium, discovered by the Curies in 1898, aroused new interest in 'uranic rays'. The first weighable amounts of radium, prepared at the beginning of this century, were used for medical applications. Immediately, the therapeutic properties of radium rays against cancer were recognised. The use of radium in medicine became so common that every kind of disease was treated by radium therapy: not only breast cancer, but also, diabetes, sciatica, uraemia, rheumatism, and even impotence{exclamation_point} As a consequence of this tremendous success, the radium industry grew rapidly during the 1920s and numerous goods, especially cosmetics, doped with radium were on sale. It was even considered that in order to be in good health, one should drink a glass of radioactive water every day, prepared by using a radium percolator. This period lasted for more than 25 years, then, just before World War II radium use was considered dangerous and the number of its applications decreased. (author)

  13. Radium-226 in wetland birds from Florida phosphate mines

    International Nuclear Information System (INIS)

    Myers, O.B.; Marion, W.R.; O'Meara, T.E.; Roessler, C.E.

    1989-01-01

    Radium-226 is a naturally-occurring radionuclide found in enhanced levels at Florida phosphate mines. We inventoried levels of radium-226 in the tissues of 4 wetland bird species from 2 mined and 2 umined areas in Florida. Bone tissues of wood duck (Aix sponsa), mottled duck (Anas fulvigula), common moorhen (Gallinula chloropus), and double-crested cormorant (Phalacrocorax auritus) colleted at phosphate mines contained more radium-226 than tissues from unmined areas. Radium-226 concentrations in these birds were within guidelines inferred from radiological standards designed for human protection and should not adversely affect bird populations

  14. Removal of Radium-226 from Radium-Contaminated Soil using Distilled Water and Humic Acid: Effect of pH

    International Nuclear Information System (INIS)

    Phillips, E.; Muhammad Samudi Yasir; Muhamat Omar

    2011-01-01

    Effect of washing solutions' pH removal of radium-226 from radium-contaminated soil using distilled water and humic acid extracted from Malaysian peat soil was studied by batch washing method. The study encompassed the extraction of humic acid and the washing of radium-contaminated soil using distilled water and humic acid solutions of 100 ppm, both with varying pHs in the range of 3 to 11. The radioactivity concentration of radium-226 was determined by gamma spectrometer.The removal of radium-226 was greater when humic acid solutions were used compared to distilled water at the pH range studied and both washing solutions showed greater removal of radium-226 when basic solutions were used. Nevertheless, comparable removal efficiencies were observed when neutral and highly basic humic acid solutions were used. (author)

  15. Redox Bias in Loss on Ignition Moisture Measurement for Relatively Pure Plutonium-Bearing Oxide Materials

    International Nuclear Information System (INIS)

    Eller, P. G.; Stakebake, J. L.; Cooper, T. D.

    2002-01-01

    This paper evaluates potential analytical bias in application of the Loss on Ignition (LOI) technique for moisture measurement to relatively pure (plutonium assay of 80 wt.% or higher) oxides containing uranium that have been stabilized according to stabilization and storage standard DOE-STD-3013-2000 (STD- 3013). An immediate application is to Rocky Flats (RF) materials derived from high-grade metal hydriding separations subsequently treated by multiple calcination cycles. Specifically evaluated are weight changes due to oxidation/reduction of multivalent impurity oxides that could mask true moisture equivalent content measurement. Process knowledge and characterization of materials representing complex-wide materials to be stabilized and packaged according to STD-3013, and particularly for the immediate RF target stream, indicate that oxides of uranium, iron and gallium are the only potential multivalent constituents expected to be present above 0.5 wt.%. The evaluation show s that of these constituents, with few exceptions, only uranium oxides can be present at a sufficient level to produce weight gain biases significant with respect to the LOI stability test. In general, these formerly high-value, high-actinide content materials are reliably identifiable by process knowledge and measurement. Significant bias also requires that UO2 components remain largely unoxidized after calcination and are largely converted to U3O8 during LOI testing at only slightly higher temperatures. Based on well-established literature, it is judged unlikely that this set of conditions will be realized in practice. We conclude that it is very likely that LOI weight gain bias will be small for the immediate target RF oxide materials containing greater than 80 wt.% plutonium plus a much smaller uranium content. Recommended tests are in progress to confirm these expectations and to provide a more authoritative basis for bounding LOI oxidation/reduction biases. LOI bias evaluation is more

  16. Plastic material investment in load-bearing silk attachments in spiders.

    Science.gov (United States)

    Wolff, Jonas O; Jones, Braxton; Herberstein, Marie E

    2018-05-17

    The nature and size of attachments is a fundamental element of animal constructions. Presumably, these adhesive structures are plastically deployed to balance material investment and attachment strength. Here we studied plasticity in dragline anchorages of the golden orb web spider, Nephila plumipes. Specifically, we predict that spiders adjust the size and structure of dragline anchorages with load, i.e. spider mass. Mass was manipulated by attaching lead pieces to the spider's abdomen resulting in a 50 percent increase in mass. Loaded spiders spun larger but structurally similar thread anchorages than unloaded spiders. Thus, the spinning program that determines the overall anchor structure is highly stereotypic, and flexibility is introduced through varying the anchor size by increasing material investment. Our study showcases substrate attachments as suitable models to investigate the interplay between innate and changeable elements in the economy of building behaviours. Copyright © 2018 Elsevier GmbH. All rights reserved.

  17. Radioactivity and the French uranium bearing minerals

    International Nuclear Information System (INIS)

    Guiollard, P.Ch.; Boisson, J.M.; Leydet, J.C.; Meisser, N.

    1998-01-01

    This special issue of Regne Mineral journal is entirely devoted to the French uranium mining industry. It comprises 4 parts dealing with: the uranium mining industry in France (history, uranium rush, deposits, geologic setting, prosperity and recession, situation in 1998, ore processing); radioactivity and the uranium and its descendants (discovery, first French uranium bearing ores, discovery of radioactivity, radium and other uranium descendants, radium mines, uranium mines, atoms, elements and isotopes, uranium genesis, uranium decay, isotopes in an uranium ore, spontaneous fission, selective migration of radionuclides, radon in mines and houses, radioactivity units, radioprotection standards, new standards and controversies, natural and artificial radioactivity, hazards linked with the handling and collecting of uranium ores, conformability with radioprotection standards, radioactivity of natural uranium minerals); the French uranium bearing minerals (composition, crystal structure, reference, etymology, fluorescence). (J.S.)

  18. Using Finite Element Method to Estimate the Material Properties of a Bearing Cage

    Science.gov (United States)

    2018-02-01

    result, a novel approach was developed to empirically test the phenolic cage and to determine the respective elastic and failure material properties...was available. As a result, a novel approach was developed to empirically test the phenolic cage and to determine the respective elastic and...was defeatured to decrease computing time, and the tooling was made rigid. The elements employed were 8-node brick elements with reduced integrations

  19. Decree of the 23-rd of June 2015 related to installations implementing radioactive materials, radioactive wastes or solid residues of uranium, thorium or radium ore submitted to authorization according to entry 1716, to entry 1735 and to entry 2797 of the nomenclature of classified installations

    International Nuclear Information System (INIS)

    Blanc, P.

    2015-01-01

    This decree defines general prescriptions applicable to installations implementing radioactive materials, to installations used as depository, warehousing or storage of radioactive materials under the form of solid residues of radium, thorium or uranium ore, as well as some processing products, and to installations used for the management of radioactive wastes in an industrial or commercial facility. The decree contains general arrangements about authorisation request, financial guarantees and conditions of exploitation. It addresses measures and arrangements for the management of installations, for the management of radioactive materials and wastes, for the prevention of atmospheric pollution, for the protection of water resources and aquatic media. It also contains general rules for waste management, specific rules for radioactive waste management. It addresses measures and arrangements regarding the prevention of technological risks, the monitoring of installations and of their impact. An appendix addresses the various aspects of the quality management system: organisation and personnel, risk identification and assessment, process management and exploitation monitoring, management of modifications, planning of emergency situation, return on experience, performance monitoring. A last appendix addresses the monitoring of underground waters

  20. Certified reference materials of agricultural products and foods bearing radioactivity from the Fukushima nuclear accident

    International Nuclear Information System (INIS)

    Minai, Y.; Miura, T.; Yonezawa, C.; Iwamoto, H.; Shibukawa, M.; Takagai, Y.; Furukawa, M.; Arakawa, F.; Okada, Y.; Kakita, K.

    2016-01-01

    Certified reference materials (CRMs) for food analysis were developed in an inter-laboratory experiment for validation of measurement of radiocesium in foodstuffs. Since 2012, five series of CRMs were developed, including for brown rice grain, soybean powder, beef flake, shiitake mushroom powder and marine fish (meat and bone parts). This paper discusses the strategy of development, including choice of CRMs developed and the preparation and certification procedures applied for CRM development. In particular, some detailed data are presented for the most popular CRMs developed: brown rice grain, soybean powder and beef flake. (author)

  1. Determination of radioactive scales in oil industry using naturally occurring radioactive materials

    International Nuclear Information System (INIS)

    Al-Masri, M. S.

    2006-06-01

    In the present study, naturally occurring radioactive materials (Radium isotopes) present in produced water and radiation measurements have been used to study the formation of scales, evaluate their age, determination of geological formations and between wells interactions. Produced water samples were collected and analyzed monthly for 5 months from 11 oil wells in three Syrian oil fields. Analysis includes radium isotopes and anions and cations concentrations in addition to radiation measurements at the well heads. The highest mean values of radium 226, Radium 228 and Radium 224 concentration in produced were 41 Bq/1, 57.1 Bq/1 and 1.1 Bq/1, respectively. The values obtained for Radium 226, Radium 228 and the activity ratio were statistically evaluated and the results were presented using the box plot method. The mean value of the activity ration of Radium 226 and Radium 228 was used to determine the age of scales accumulated inside tubulars. (author)

  2. Nasopharyngeal radium irradiation: The lessons of history.

    Science.gov (United States)

    Graamans, Kees

    2017-02-01

    In the Netherlands, nasopharyngeal radium irradiation was started in 1945. The indications included refractory symptoms of otitis media with effusion and other adenoid-related disorders after adenoidectomy. It was considered a safe and effective therapy. Its use decreased sharply in 1958, following a worldwide media avalanche around the dramatic events in the treatment of a 5-year-old child in Utrecht, enhancing the widespread fear of radioactivity. This case history illustrates the powerful role of the media in medical decision-making. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  3. Field measurements of radium in the human body

    International Nuclear Information System (INIS)

    Toohey, R.E.; May, H.A.

    1978-01-01

    Two whole body counting systems have been developed and employed for field measurements. The radium contents of nine previously unmeasured cases have been determined during three field trips. Future trips are being scheduled to make body radioactivity measurements on a specific subpopulation of CHR radium cases

  4. Radium in humans: A review of U.S. studies

    Energy Technology Data Exchange (ETDEWEB)

    Rowland, R.E.

    1994-09-01

    This document was originally conceived as a compilation of activities at Argonne National Laboratory that were directed toward the study of radium in humans. However, it soon became obvious that this was a very limited approach, because such a compilation would include no background on the widespread uses of radium in industry and in the medical profession, nor would it address the early history of the discovery of the hazards of radium. Such an approach would also ignore contributions to the study of radium effects made at other laboratories. This document now addresses these topics, in order to give an overall picture of what might be called the radium era, that period from the early part of this century, when radium was rapidly exploited as a tool and a medication, to the present time, when radium is not generally used and the study of its effects has been terminated. The appendix to this review lists all of the measured radium cases, a total of 2,403 individuals whose records were in the files at the end of 1990. For each case the route of exposure, the dates of exposure, the years of birth and death, the measured body content, the calculated intake and dose, and the cause of death have been listed. 165 refs.

  5. Radium in baggerspecie afkomstig uit het Rijnmondgebied. Resultaten over 2001

    NARCIS (Netherlands)

    Lembrechts J; Glastra P; Nissan LA; Overwater RMW; LSO

    2002-01-01

    The radium concentration was measured in 25 samples of harbour sludge taken in 2001 from the Rijnmond area (Rotterdam harbours and the Nieuwe Waterweg). High radium levels were found near the former discharge points of the phosphate ore processing plants, confirming the results of previous

  6. State of uranium and radium radionuclides in the soil medium

    International Nuclear Information System (INIS)

    Vojnikova, E.V.; Sokolik, G.A.; Ovsyannikova, S.V.; Popenya, M.V.

    2010-01-01

    The reserves of migratory active, potentially mobile and potentially biologically available forms of uranium and radium in the mineral and organic soils of Belarus have been established. The uranium and radium species in the soil pore waters have been also studied. The received data makes possible the estimation of the radionuclide ability to participate in the processes of biogeochemical migration in terrestrial ecosystems. (authors)

  7. Determination of radium 226 and 228 in water

    International Nuclear Information System (INIS)

    Jeanmaire, L.; Willemot, J.M.; Verry, M.

    1989-01-01

    Usually, only radium 226 is measured in water since determination of radium 228 is not easy at the natural levels. A technique has therefore been developed to measure, at the same time and at low radioactivity levels, two radionuclides most often associated in water and with similar toxicity. Computer data processing brings significant improvements though calculation can be manually done [fr

  8. Bearing system

    Science.gov (United States)

    Kapich, Davorin D.

    1987-01-01

    A bearing system includes backup bearings for supporting a rotating shaft upon failure of primary bearings. In the preferred embodiment, the backup bearings are rolling element bearings having their rolling elements disposed out of contact with their associated respective inner races during normal functioning of the primary bearings. Displacement detection sensors are provided for detecting displacement of the shaft upon failure of the primary bearings. Upon detection of the failure of the primary bearings, the rolling elements and inner races of the backup bearings are brought into mutual contact by axial displacement of the shaft.

  9. The behaviour of radium in waterways and aquifers

    International Nuclear Information System (INIS)

    1984-01-01

    The Coordinated Research Program was designed to develop systematic information on the form and movement of radium in water under a range of environmental conditions. The final report contains: a) Selection and standardization of methods for determination of radium in water; b) The distribution of soluble and insoluble radium in natural waters, affected by mining or milling operations; c) The factors affecting the leaching rate from ore heaps and tailings piles; d) The uptake of radium by biological systems, especially those which form part of man's food chain. This information being of great value to those authorities responsible for assessing the consequences of radium releases to water and to those responsible for setting discharge limits

  10. Techniques for long term conditioning and storage of radium sources

    International Nuclear Information System (INIS)

    Dogaru, Gheorghe; Dragolici, Felicia; Nicu, Mihaela

    2008-01-01

    The Horia Hulubei National Institute of Research and Development for Physics and Nuclear Engineering developed its own technology for conditioning the radium spent sealed radioactive sources. The laboratory dedicated to radiological characterization, identification of radium sources as well as the encapsulation of spent sealed radioactive sources was equipped with a local ventilation system, welding devices, tightness test devices as well as radiometric portable devices. Two types of capsules have been designed for conditioning of radium spent sealed radioactive sources. For these kinds of capsules different types of storage packaging were developed. Data on the radium inventory will be presented in the paper. The paper contains the description of the process of conditioning of spent sealed radioactive sources as well as the description of the capsules and packaging. The paper describes the equipment used for the conditioning of the radium spent sealed sources. (authors)

  11. Radium 226 in the deep north-eastern Atlantic Ocean

    International Nuclear Information System (INIS)

    Rhein, M.

    1986-01-01

    With reference to the distribution of radium-226 in the western equatorial and north-eastern deep Atlantic Ocean it was possible to establish structures in the correlations of radium-226 to its chemical homologue Ba and dissolved SiO 2 . An 11-box model of the deep Atlantic Ocean was used to obtain information on the size of the radium-226 and Ba sources. The soil source derives mainly from the dissolution of barite. For the first time, an evaluation of the radium-226 flow resulting from the dissolution of particulate matter is presented. The box model and the radium-226 concentrations measured put down the value as 23-46·10 -21 mol/m 2 s. (DG) [de

  12. Hyperspectral surface materials map of quadrangle 3264, Naw Zad-Musa Qala (423) and Dihrawud (424) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  13. Hyperspectral surface materials map of quadrangle 3266, Uruzgan (519) and Moqur (520) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  14. Hyperspectral surface materials map of quadrangle 3464, Shahrak (411) and Kasi (412) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  15. Hyperspectral surface materials map of quadrangle 3466, La`l wa Sar Jangal (507) and Bamyan (508) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  16. Hyperspectral surface materials map of quadrangle 3260, Dasht-e-Chah-e-Mazar (419) and Anar Darah (420) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  17. Hyperspectral surface materials map of quadrangle 3470, Jalalabad (511) and Chaghasaray (512) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  18. Hyperspectral surface materials map of quadrangle 3570, Tagab-e-Munjan (505) and Asmar-Kamdesh (506) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  19. Hyperspectral surface materials map of quadrangle 3364, Pasaband (417) and Markaz-e Kajiran (418) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  20. Hyperspectral surface materials map of quadrangle 3462, Herat (409) and Chishti Sharif (410) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  1. Hyperspectral surface materials map of quadrangle 3468, Chak-e Wardak-Siyahgird (509) and Kabul (510) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  2. Hyperspectral surface materials map of quadrangle 3368, Ghazni (515) and Gardez (516) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  3. Hyperspectral surface materials map of quadrangle 3162, Chakhansur (603) and Kotalak (604) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  4. Hyperspectral surface materials map of quadrangle 3362, Shindand (415) and Tulak (416) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  5. Hyperspectral surface materials map of quadrangle 3366, Gizab (513) and Nawer (514) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  6. Hyperspectral surface materials map of quadrangle 3770, Faizabad (217) and Parkhaw (218) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  7. Hyperspectral surface materials map of quadrangle 3564, Jowand (405) and Gurziwan (406) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  8. Hyperspectral surface materials map of quadrangle 3166, Jaldak (701) and Maruf-Nawa (702) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  9. Hyperspectral surface materials map of quadrangle 3566, Sangcharak (501) and Sayghan-o-Kamard (502) quadrangles, Afghanistan, showing iron-bearing minerals and other material

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  10. Hyperspectral surface materials map of quadrangle 3670, Jurm-Kishim (223) and Zebak (224) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  11. Hyperspectral surface materials map of quadrangle 3568, Pul-e Khumri (503) and Charikar (504) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  12. Hyperspectral surface materials map of quadrangle 3262, Farah (421) and Hokumat-e-pur-Chaman (422) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  13. Hyperspectral surface materials map of quadrangle 3164, Lashkar Gah (605) and Kandahar (606) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  14. Hyperspectral surface materials map of quadrangle 3562, Khawja-Jir (403) and Murghab (404) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  15. Hyperspectral Surface Materials Map of Quadrangle 3268, Khayr Kot (521) and Urgun (522) Quadrangles, Afghanistan, Showing Iron-bearing Minerals and Other Materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  16. Formerly utilized MED/AEC sites Remedial Action Program. Radiological survey of the St. Louis Airport Storage Site, St. Louis, Missouri. Final report. [U, Ra-bearing wastes stored in 1940-60's

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-09-01

    Results of two radiological surveys of the St. Louis-Lambert Airport property, formerly known as the Airport Storage Site, St. Louis, Missouri, are presented. Uranium- and radium-bearing waste materials were stored from the 1940's to the late 1960's in this area. The surveys included direct measurements of beta-gamma radiation; determination of uranium, actinium, and radium concentrations in soil samples and from bore holes; determination of radionuclide concentrations in groundwater and surface water; measurement of radon flux from the ground surface; and measurements of /sup 222/Rn in air near the site. Results indicate that some offsite drainage pathways are becoming contaminated, probably by runoff from the site; no migration of /sup 222/Rn from the site was observed.

  17. Influence of carbon-bearing raw material on microfungus Blakeslea Trispora biomass producing

    Directory of Open Access Journals (Sweden)

    L. Myronenko

    2015-05-01

    Full Text Available Introduction. This paper investigates influence of hydrated fullerenes on degree of accumulation bioactive substances of microfungus Blakeslea trispora. Materials and methods. In this research effort detection of fatty-acid composition in amino acids, carotenoids and sterols biomass by means of using methods of high-performance liquid chromatography, adsorption and disjunctive chromatography in thin-layer sorbent and spectrophotometric; gravimetric method; method of direct spectrophotometration in benzene took place. Results and discussion. It has been induced that application of hydrated fullerenes in microfungus Blakeslea trispora nutrient medium promotes increasing accumulation in biomass quantity of carotene on 32,3 %; asparaginic, glutamic acids and leucine. Reproportion carbon to nitrogen by means of adding to microfungus Blakeslea trispora nutrient culture medium hydrated fullerenes did not influence on the biomass amino acid structure any. Obtained data of fatty-acid composition in microfungus Blakeslea trispora lipoid fraction indicate about significant predominance unsaturated fatty acids and, as a result of this, we have advance of use microfungus Blakeslea trispora biomass as a source of biologically active substances for establishing a new kind of prophylactic action goods.

  18. Collinear resonance ionization spectroscopy of radium ions

    CERN Multimedia

    We propose to study the neutron-deficient radium isotopes with high-resolution collinear resonance ionization spectroscopy. Probing the hyperfine structure of the $7{s}\\,^2\\!{S}\\!_{1/2}\\,\\rightarrow\\,7{p}\\,^{2}\\!{P}\\!_{1/2}$ and $7{s}\\,^{2}\\!{S}\\!_{1/2}\\,\\rightarrow\\,7{p}\\,^{2}\\!{P}\\!_{3/2}$ transitions in Ra II will provide atomic-structure measurements that have not been achieved for $^{{A}<208}$Ra. Measurement of the $7{s}\\,^{2}\\!{S}\\!_{1/2}\\,\\rightarrow\\,7{p}\\,^{2}\\!{P}\\!_{3/2}$ transition in $^{{A}<214}$Ra will allow the spectroscopic quadrupole moments to be directly measured for the first time. In addition, the technique will allow tentative spin assignments to be confirmed and the magnetic dipole moments measured for $^{\\textit{A}<208}$Ra. Measurement of the hyperfine structure (in particular the isotope shifts) of the neutron-deficient radium will provide information to further constrain the nuclear models away from the N=126 shell closure.

  19. Microbial uptake of uranium, cesium, and radium

    Energy Technology Data Exchange (ETDEWEB)

    Strandberg, G.W.; Shumate, S.E. II; Parrott, J.R. Jr.; McWhirter, D.A.

    1980-01-01

    The ability of diverse microbial species to concentrate uranium, cesium, and radium was examined. Saccharomyces cerevisiae, Pseudomonas aeruginosa, and a mixed culture of denitrifying bacteria accumulated uranium to 10 to 15% of the dry cell weight. Only a fraction of the cells in a given population had visible uranium deposits in electron micrographs. While metabolism was not required for uranium uptake, mechanistic differences in the metal uptake process were indicated. Uranium accumulated slowly (hours) on the surface of S. cerevisiae and was subject to environmental factors (i.e., temperature, pH, interfering cations and anions). In contrast, P. aeruginosa and the mixed culture of denitrifying bacteria accumulated uranium rapidly (minutes) as dense, apparently random, intracellular deposits. This very rapid accumulation has prevented us from determining whether the uptake rate during the transient between the initial and equilibrium distribution of uranium is affected by environmental conditions. However, the final equilibrium distributions are not affected by those conditions which affect uptake by S. cerevisiae. Cesium and radium were concentrated to a considerably lesser extent than uranium by the several microbial species tested. The potential utility of microorganisms for the removal and concentration of these metals from nuclear processing wastes and several bioreactor designs for contacting microorganisms with contaminated waste streams will be discussed.

  20. Superfund Record of Decision (EPA Region 2): Montclair/West Orange, Radium, NJ. (First Remedial Action), June 1989

    International Nuclear Information System (INIS)

    1989-01-01

    The Montclair/West Orange Radium site is in the towns of Montclair and West Orange in Essex County, New Jersey. The soil at the site is contaminated with radioactive-waste materials suspected to have originated from radium processing or utilization facilities located nearby during the early 1900s. Temporary radon ventilation systems and gamma-radiation shielding have been installed and maintained by EPA and the State to reduce indoor exposures. The primary contaminant of concern affecting the soil and structures is radium 226 which decays to radon gas. The selected remedial action for the site includes excavation of approximately 41,000 cu yd of highly contaminated soil and an unspecified amount of debris followed by offsite disposal; installation and maintenance of indoor engineering controls at less contaminated properties; environmental monitoring to ensure remedy effectiveness; and continuation of a treatment technology study for future actions. EPA deferred a final continuation of a treatment-technology study for future action

  1. Health assessment for US Radium-West Orange, Orange, Essex County, New Jersey, Region 2. CERCLIS No. NJD980654172. Preliminary report

    International Nuclear Information System (INIS)

    1989-01-01

    The U.S. Radium-West Orange site is on the National Priorities List. The two-acre site was the site of the former U.S. Radium processing facility where radium extraction, production, application, and distribution may have taken place. The principal environmental contamination at the site and the vicinity consists of isotopes of radon, radon daughters, and radium-226. The site is considered to be of public health concern, ranging from potential to imminent, depending on the individual area in question, because of the risk to human health caused by exposure to radioactive materials via inhalation of contaminated particulate and gaseous radiation, ingestion of contaminated particulate, and external exposure to gamma radiation

  2. Case study: Montclair/West Orange and Glen Ridge Radium Superfund sites

    International Nuclear Information System (INIS)

    Pezzella, R.; Seppi, P.; Watson, D.

    1994-01-01

    The Montclair/West Orange and Glen Ridge Radium Sites are located 12 miles west of New York City in three residential communities in Essex County, New Jersey. The sites are contaminated with waste materials from a local radium processing facility which ceased operations in 1926. Houses were subsequently constructed on or near the radium waste disposal areas. The waste material was also used as backfill, which caused contamination to be spread randomly over the communities. There are 769 properties between four townships that comprise the Superfund sites. The Environmental Protection Agency (EPA) conducted an aerial survey in 1981 which identified the boundaries of the sites. In 1985, the New Jersey Department of Environmental Protection (NJDEP) began a pilot study to examine the feasibility of excavation and off-site disposal of contaminated material as a permanent solution. The study was interrupted when the permit for the disposal site was revoked by the state of Nevada. Since 1990 field testing has been completed on over 725 properties and remediation and restoration has been completed on 75 properties

  3. The effects of microhardnesses and friction coefficients of GCr15 and Cr4Mo4V bearing materials by ion implantation

    International Nuclear Information System (INIS)

    Yang Qifa; Xiang Deguang; Lu Haolin

    1988-01-01

    Some experimental results of microhardnesses and friction coefficients of GCr15 and Cr4Mo4V bearing materials which were implanted with Cr, Mo, N and B ions are reported in this paper. It is found that the microhardnesses are increased and the friction coefficients are reduced by Cr, Mo, N and B ion implantation for two materials. The friction coefficients of Cr + Mo + N , Cr + Mo + B ion implanted samples are reduced to 1/3 of the unimplanted samples

  4. Celebration of the radium and polonium discovery as a promotion of nuclear energy in Poland

    International Nuclear Information System (INIS)

    Latek, Stanislaw

    1998-01-01

    The radium and polonium discovery centennial was inaugurated in April 1997. The first event was a Polish-French show of scientific documentary movies on the uses of ionizing radiation and nuclear power. A symposium Radiation - History and Modern Times was organized in spring 1997. Many other interesting events were held throughout 1997. Warsaw hosted an interesting exhibition 'From the Radium Needle to the Medical Accelerators'. A seminar and an exhibition on Radiation Technique in Environmental Protection were organized in cooperation with the IAEA. The Council for Atomic Energy initiated and conducted a workshop on Radioactivity - Risk and Hope. The Polish Academy of Science and the Society of Nuclear Medicine organised a symposium on Polonium and Radium Discovery Impact on Medicine, Radiation Protection and Medical Industry. The National Atomic Energy was the initiator of film shows held for school youth, which turned out to be a great success. The youngsters, mainly from schools bearing the name of Marie Curie, had an opportunity to see films about the great scientist and her discoveries, and on the very phenomenon of radiation. They also had a chance to visit Maria research reactor in the Institute of Atomic Energy in Swierk. Now, at the beginning of February 1998, a three-day scientific session is being held in Warsaw, to commemorate the radium and polonium discovery. Many other events will take place in the coming months. In particular, June 1998, an international conference on Nuclear Physics Close to the Barriers will be held. Another conference, closing the centennial sponsored by UNESCO will focus on the Scientific and Philosophical Consequences of Discovery of Plutonium and Radium, Benefits and Threats to Mankind. Public opinion polls, similar to those conducted in 1996, are planned for spring 1998. The 1996 polls, conducted 10 years after the Chernobyl accident, showed that the majority of Poles feared ionizing radiation and opposed the nuclear power

  5. Improved online δ18O measurements of nitrogen- and sulfur-bearing organic materials and a proposed analytical protocol

    Science.gov (United States)

    Qi, H.; Coplen, T.B.; Wassenaar, L.I.

    2011-01-01

    It is well known that N2 in the ion source of a mass spectrometer interferes with the CO background during the δ18O measurement of carbon monoxide. A similar problem arises with the high-temperature conversion (HTC) analysis of nitrogenous O-bearing samples (e.g. nitrates and keratins) to CO for δ18O measurement, where the sample introduces a significant N2 peak before the CO peak, making determination of accurate oxygen isotope ratios difficult. Although using a gas chromatography (GC) column longer than that commonly provided by manufacturers (0.6 m) can improve the efficiency of separation of CO and N2 and using a valve to divert nitrogen and prevent it from entering the ion source of a mass spectrometer improved measurement results, biased δ18O values could still be obtained. A careful evaluation of the performance of the GC separation column was carried out. With optimal GC columns, the δ18O reproducibility of human hair keratins and other keratin materials was better than ±0.15 ‰ (n = 5; for the internal analytical reproducibility), and better than ±0.10 ‰ (n = 4; for the external analytical reproducibility).

  6. Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution

    Directory of Open Access Journals (Sweden)

    Zoran Anđić

    2016-12-01

    Full Text Available Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that occur in the accident, as well as the modeling of the system of protection against air-pollution due to the cancellation of work the bag filter was carried out. Applying the model (Aloha software package provides an overview of possible developments of events and zones of propagation of the precipitated particulate matter through the share of cadmium (Cd in them. In the case of malfunction of filter system, emissions of particulate matter enormously exceed the permitted values. In the conditions of the simulated accident, particle velocity of flue gases was amounted E≈738mg/s or 2657g/h of dust. The propagation of the precipitated particulate matter in the lower layer of the atmosphere, downwind, given trough the share of Cd in them, is 100m from the source of pollution for the characteristic density of 5mg/m2×day and 140m for the characteristic density of 2mg/m2×day, in the stable state of the atmosphere, i.e. 870m and 1100m, respectively, in the neutral state of the atmosphere.

  7. Placement of radium/barium sludges in tailings areas

    International Nuclear Information System (INIS)

    Murphy, K.L.; Multamaki, G.E.

    1980-01-01

    Currently radium is removed from uranium mining and milling effluents by the addition of barium chloride to precipitate the radium as radium/barium sulphate. The precipitate is allowed to settle in sedimentation basins prior to discharge of the effluent. The sedimentation basins are not suitable for final disposal of the sludge, and placement of the sludges in the tailings area has been proposed. The geochemical environment of fresh tailings areas was characterized as an acidic, oxidized surface zone underlain by an alkaline, reduced zone comprising the rest of the tailings. The quantity of sludge produced was estimated to be small relative to the quantity of tailings, and therefor a relatively small amount of radium would be added to the tailings disposal area by the addition of sludge. To confirm whether sludge addition affected radionuclide solubilization, laboratory leaching tests were conducted on slurries of acid leach tailings, and sludge-tailings mixtures. Radium in the (Ra,Ba)SO 4 sludge was at least as stable as radium in the tailings, and the sludge was able to absorb radium released from the tailings. The addition of sludge did not affect uranium and thorium solubilization. From these results it appears that the placement of sludge in tailings areas would not adversely affect the stability of radionuclides in the tailings or sludge. (auth)

  8. Radithor and the era of mild radium therapy

    International Nuclear Information System (INIS)

    Macklis, R.M.

    1990-01-01

    Soon after the discovery of radium, a school of practitioners arose who were interested primarily in the physiological rather than the tumoricidal powers of this new radioactive element. This treatment philosophy was called mild radium therapy and involved the oral or parenteral administration of microgram quantities of radium and its daughter isotopes, often as cures for rheumatic diseases, hypertension, and metabolic disorders. Manufacturers of patent medicines responded to this market by producing a variety of over-the-counter radioactive preparations including pills, elixirs, and salves. One such nostrum was Radithor, a popular and expensive mixture of radium 226 and radium 228 in distilled water. Radithor was advertised as an effective treatment for over 150 endocrinologic diseases, especially lassitude and sexual impotence. Over 400,000 bottles, each containing over 2 muCi (74 kBq) of radium, were apparently marketed and sold worldwide between 1925 and 1930. The death of the Pittsburgh millionaire sportsman Eben M. Byers, who was an avid Radithor user, by radium poisoning in 1932 brought an end to this era and prompted the development of regulatory controls for all radiopharmaceuticals

  9. Study of the radium sorption/desorption on goethite

    International Nuclear Information System (INIS)

    Bassot, S.; Stammose, D.; Mallet, C.; Lefebvre, C.; Ferreux, J.-M.

    2000-01-01

    The oxi-hydroxides, present at trace level in uranium mill tailings, are responsible of about 70% of the 226 radium sorption, half being fixed on crystallized forms. This radionuclide (half time=1622y), present at high level (50 to 100kBq.kg -1 ), can be released in groundwater, involving a possible contamination of the food chain (actual concentration limit=0.37Bq.1 -1 ). So, it is very important to point out the mechanisms of the radium sorption/desorption on crystallized oxi-hydroxides as a function of chemical conditions of the system. The radium sorption on synthetic goethite α-FeOOH has been studied as a function of contact time, initial radium activity, pH, sodium and calcium concentrations. The results show that, after one hour of contact time (necessary to reach equilibrium), the radium sorption increases widely in a pH range 6-7. The increase of Na + concentration is without influence on the radium sorption, indicating the low interactions between sodium and surface sites. At the opposite, the presence of calcium in solution decreases widely the radium sorption, that indicates a competition between calcium and radium for the same kind of sorption sites of the oxi-hydroxide surface. The percentage of radium desorbed increases widely with time, from 1 to 120h and becomes constant at a time higher than 120h. This long equilibrium time for desorption in comparison with sorption one can be explain by a local evolution of the sorption sites of the solid, which become less accessible for the solution in contact. (author)

  10. X-ray and radium gamma radiation injuries

    International Nuclear Information System (INIS)

    Fokkema, R.E.

    1993-05-01

    During the period 1896-1939 a number of maxima could be distinguished in the incidence of X-ray and radium gamma ray injuries in patients. An explanation for these fluctuations is investigated in this study. The first distinguishable maximum in the number of reported cases of X-ray injuries can be found in the period 1896-1897 and mainly concerns skin lesions, caused by the lack of shielding and ignorance of the effects. In the period 1904-1905 there was once again an apparent prevalence of radiation injuries to patients. After 1905 the incidence of radiation injuries decreased due to a wider use of dosimetric methods. The third phase of increased injuries may be subdivided into three components. In diagnostic roentgenology from 1896 to 1926 a number of causes of roentgen burns persisted: multiple or long exposures, the use of a short focus-skin-distance and a lack of suitable dosimetric methods. The reduction of complications after 1923 can be attributed to several factors: systematic training of physics who wished to become roentgenologists, greater care of doctors, the use of an alternative method of radiotherapy according to Coutard's method, the introduction of dosimetry with ionization chambers (after 1924), the consensus reached over the roentgen as a unit of applied dosage (in 1928), and the introduction of absorption curves for radiation quality (in 1933). Around 1920 a high complication rate arose as a result of exposure to radiation emitted by radium. In 1922 the first reliable radium dosimetry method came available. This applied to external radium therapy by regular shaped applicators. After 1938 reliable dosimetry was achieved in the field of interstitial radium therapy (brachytherapy). Injuries from radium therapy, however, persisted till about 1940, caused not only by the delayed availability of radium dosimetry, but also to the use of radium therapy by poorly trained radium therapists. 28 figs., 5 tabs

  11. Spatial distribution of radium in coastal marine waters of Tamil Nadu

    International Nuclear Information System (INIS)

    Hemalatha, P.; Jha, S.K.; Rajaram, S.; Puranik, V.D.

    2010-01-01

    This paper presents the radium activity levels in the coastal area covering the entire south eastern coast of Tamil Nadu from Chennai to Kanyakumari. Radium-226 (T 1/2 =1620 y), a α-emitter in the decay chain of elements, of the primordial uranium, is a ubiquitous component of the natural radiation in marine environment. It has a high degree of radiotoxicity, and is found in most abiotic and biotic materials, leading to direct exposure to biota and indirect human radiation exposure. Uptake of 226 Ra in biological systems depends upon the availability of the nuclide. In the light of the possible radio ecological significance in the environment, the present study has been undertaken to investigate the distribution of 226 Ra in the marine components of the Tamil Nadu coast for which no such data are available

  12. Study of radium extraction mechanisms from scales by leaching in different acidic and alkaline media

    International Nuclear Information System (INIS)

    Al-Masri, M. S.; Gafar, M.; Al-Kurdi, H.

    2002-07-01

    The present report shows the results of leaching experiments for scales containing naturally occuring radioactive materials using different acidic and alkaline media. The obtained result can be used for defining the method of safe disposal of such waste. Leaching solutions used in this study were distilled water, mineral acids (sulpharic acid, hydrochloric acid and nitric acid), sodium, potassium hydroxides, ammonium oxalate EDTA, sodium carbonate, potassium acetate, and a mixture of potassium chloride and hydrochloric acid. The results have shown that the extraction ratio of radium-226, the most abundant isotope in scales, is very low and even negligible using all different media. This indicates that all scales produced in Syrian oil fields do not require any chemical preparation before disposal. In addition, the effect of both stirring time of phrases and concentration of leaching media that may affect the radium transfer process from solid phase to aqueous phase have been investigated were no measurable amount being observed in the leachate. (author)

  13. Radon generator and the method of radium carrier fabrication

    International Nuclear Information System (INIS)

    Czerski, B.

    1992-01-01

    The radon generator construction and the method of radium carrier fabrication has been the subject of the patent. The generator is a cylindrical vessel with gas valves system and two filters inside. Between them the radium carrier has been located. As a carrier polyurethane foam has been used. The carrier is obtained in a generator vessel from polyester resin in the presence of activated mixture of engine oil, zinc-organic catalyst and toluene. To the obtained mixture the radium chloride in the solution of hydrochloric acid is added. The carrier foam is produced by mechanical stirring of substrates inside the vessel and drying in 50 C in a heater. 1 fig

  14. Florence Kelley and the radium dial painters

    International Nuclear Information System (INIS)

    Cloutier, R.J.

    1980-01-01

    All health physicists are familiar with the radium dial painter episode of the early 1900s and how one of today's primary radiation limits was set after studying both the health effects of these workers. The social history of this event is not as well known to health physicists. This paper tells of the efforts by Florence Kelley of the National Consumers League and others on behalf of the dial painters and of the events that led to Kelley's interest in the problem. Known as the 'Impatient Crusader', Florence Kelley worked to have legislation passed that would eliminate the radiation hazards of dial painting and to obtain compensation for those who were injured. (author)

  15. Biosorption of uranium, radium, and cesium

    International Nuclear Information System (INIS)

    Strandberg, G.W.

    1982-01-01

    Some fundamental aspects of the biosorption of metals by microbial cells were investigated. These studies were carried out in conjunction with efforts to develop a process to utilize microbial cells as biosorbents for the removal of radionuclides from waste streams generated by the nuclear fuel cycle. It was felt that an understanding of the mechanism(s) of metal uptake would potentially enable the enhancement of the metal uptake phenomenon through environmental or genetic manipulation of the microorganisms. Also presented are the results of a preliminary investigation of the applicability of microorganisms for the removal of 137 cesium and 226 radium from existing waste solutions. The studies were directed primarily at a characterization of uranium uptake by the yeast, Saccharomyces cerevisiae, and the bacterium, Pseudomonas aeruginosa

  16. [Precarious matters. The radium economy, episteme of risk and the emergence of tracer technique in national socialism].

    Science.gov (United States)

    von Schwerin, Alexander

    2009-01-01

    Following the traces of radioactive material is--as scholars have recently shown--a valuable historical approach in order to evaluate the material 'factor' of science in action. Even though the origins of materials like radium and artificial isotopes are quite different, their circulation is interconnected. A material pathway can be drawn from the radium industry to the scientific rise of artificial isotopes as indicator substances in the 1930s, continuing to the building of networks by German scientists working for the war efforts. Also, this pathway reveals the role of radiation protection in establishing that material culture. Finally, the dynamics of material traces and institutional linkages is shown by the tracer work of biophysicists and radiation biologists working at the Genetic Department of the Kaiser Wilhelm Institute for Brain Research in Berlin and at the Institut de Chimie Nucléaire at Paris, which at that time was occupied by German troops.

  17. Rates of leaching of radium from contaminated soils: an experimental investigation of radium bearing soils from Port Hope, Ontario

    International Nuclear Information System (INIS)

    Nathwani, J.S.; Phillips, C.R.

    1978-01-01

    The leachability of Ra-226 from soil at Port Hope, Ontario contaminated by waste from a long established U refinery is described here. A small-scale static leach test was devised to provide information to permit an assessment of hazard due to leaching in the environment. Two different leaching solutions were prepared to simulate a range of infiltrating water quality in disposal environments: one by bubbling CO 2 into distilled water to pH 5.5, and another by bubbling SO 2 into water to pH 3.5. Narrow-range size fractions of the soils (i.e. 0.250 to 0.105 mm) were leached for 30 to 45 days (equivalent rainfall of 2 to 3 yr). It was found that leaching is significantly affected by soil texture, total amounts leached and the maximum concentrations reached being much greater for coarser, and intermediate size fractions than for fine soil fractions. Also, leachant acidity significantly increased leaching rates and resulted in enhanced mobility in soils. A straight line for the plot of Q/Q 0 (cumulative fraction released) vs. Tsup(1/2) (T is leaching time in days) indicated that leaching could be considered to be a diffusion phenomenon in accordance with Fick's law. Diffusion coefficients ranging from 5 X 10 -11 to 2 X 10 -13 cm 2 day -1 were found. These coefficients provide a basis for estimating the fraction that would be leached over longer periods. (Auth.)

  18. Superfund Record of Decision (EPA Region 8): Denver Radium/Card Corporation Property, Colorado (third remedial action), June 1987. Final report

    International Nuclear Information System (INIS)

    1987-01-01

    The Denver Radium/Card Corporation property is a 17.2-acre site located in Denver, Colorado. In 1979, the EPA discovered a reference to the National Radium Institute in 1916 U.S. Bureau of Mines report. Subsequent field research revealed the presence of thirty-one radioactive sites in the Denver Metropolitan area, one of these being Card property, the location of the original Pittsburgh Radium Company processing facility. The site consists of five buildings and an oil and waste water pond at the eastern boundary. There is no serious public health risk at present from radium or its decay products, most notable radion gas. However, there is the potential for increased public health risk if the radium contaminated materials are misused or inadvertently spread. Currently, radium has been detected in the soil, sediment, and underneath the True Truss building. EPA's preferred remedial action for the Card property is permanent offsite disposal. However, the alternative can not be implemented until a suitable offsite facility is designated

  19. Bio leaching of Uranium - bearing material from Abu Thor area, West Central Sinai, Egypt for recovering uranium

    International Nuclear Information System (INIS)

    Abd El Wahab, G.M.; Amin, M.M.; Aita, S.K.

    2012-01-01

    A uranium-bearing material was recorded within the Intra-Carboniferous Paleokarst Profile of Um-Bogma Formation at Abu Thor area, West Central Sinai, Egypt. The present paper is concerned with the bio leaching of U and Cu using Aspergillus Niger (A. Niger) followed their proper recovery. The working Abu Thor representative sample assays 0.22% U as the element of interest as well as up to 25% CuO beside the other rock constituents SiO 2 (33%), Al 2 O 3 (10.4%) and CaO(8.5%). The effective bio leaching of U and Cu from Abu Thor ore sample using A.Niger was performed at the following optimum conditions: an incubation time of 6 days, sample/ liquid (S/L) ratio of 1/10, ph value of 1 and a temperature of 60 degree C. The prepared bio leach liquor assays 0.19 g/l of U and 15.8 g/l of Cu with leaching efficiencies of 97% and 79%, respectively. Uranium was recovered using 25% TBP in kerosene at O/A ratio of 1/1 and contact time of 5 min with achieved extraction efficiency of 96%. However the stripping of U was conducted by using 8% Na 2 CO 3 at A/O ratio of 1/1 and contact time of 5 min with stripping efficiency reached 99%. On the other hand, Cu was directly precipitated as CuS using the freshly released H 2 S gas with the addition of solid Na 2 S. The optimum precipitation conditions were S/L ratio of 1/100, ph 1.5 and room temperature where the precipitation efficiency of Cu achieved 99%

  20. Phyllosilicate weathering pathways in chlorite-talc bearing soil parent materials, D.R. Congo: early findings.

    Science.gov (United States)

    Dumon, Mathijs; Oostermeyer, Fran; Timmermans, Els; De Meulemeester, Aschwin; Mees, Florias; Van Driessche, Isabel; Erens, Hans; Bazirake Mujinya, Basile; Van Ranst, Eric

    2015-04-01

    The study of the formation and transformation of clay minerals is of the upmost importance to understand soil formation and to adjust land-use management to the land surface conditions. These clay minerals determine to a large extent the soil physical and chemical properties. It is commonly observed that over time the mineralogy of any parent material is transformed to a simple assemblage composed mostly of Al and Fe oxides and low-activity clays, e.g. kaolinite. This is especially obvious in the humid tropics, which have been protected from glacial erosion, allowing deep, highly weathered soils to form. Despite the abundant presence of kaolinite in these soils, its formation pathways are still under debate: either neoformation by dissolution-crystallisation reactions or solid-state transformation of 2:1 phyllosilicates. To elucidate this, weathering sequences in a unique 40 m core taken below a termite mound, reaching a talc-chlorite bearing substrate in the Lubumbashi area, Katanga, DR Congo are being investigated in detail using a.o. quantitative X-ray diffraction analysis, chemical characterization, micromorphology and µXRF-scanning with the main objective to improve the understanding of the formation pathways of kaolinite subgroup minerals in humid tropical environments. Based on an initial characterization of the core, two zones of interest were selected for more detailed analysis, for which the early findings will be presented. The first zone extends from ca. 9 m to 11 m below the surface is dominated by kaolinite but shows early traces of primary talc and micas. The second zone extends from 34 to 36 m below the surface and contains large amounts of chlorite, with smaller amounts of talc, micas and kaolinite.

  1. Lead-Radium Activity Ratios From Otoliths of Regional Bottomfishes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains lead-radium dating of opakapaka (Pristipomoides filamentosus) otoliths from recent and archival collections (1987-2009).

  2. Some scientific landmarks of the MIT radium toxicity studies

    International Nuclear Information System (INIS)

    Maletskos, C.J.

    1996-01-01

    Until the recent forced termination of the studies on radium toxicity, more than six decades of investigation and research have been devoted to them. These studies involve ∼2400 subjects who were exposed to long-term internally deposited radium [high linear energy transfer (LET)], whose health status was evaluated in great detail and whose radiation dosimetry was based on measurements of their actual radium body burdens. The quality and usefulness of these studies are, therefore, in sharp contrast to other human radiation-exposure studies that involve instantaneous or somewhat protracted external low-LET exposures and inferred radiation dose, as in the atomic-bomb survivor studies. As a consequence of national news in 1932 concerning the gruesome death of a prominent Pittsburgh businessman and sportsman, Robley D. Evans became involved with radium toxicity, and its study became an important project when he joined the faculty of the Massachusetts Institute of Technology physics department and set up the interdisciplinary Radioactivity Center

  3. Potential toxic elements in stream sediments, soils and waters in an abandoned radium mine (central Portugal).

    Science.gov (United States)

    Antunes, I M H R; Neiva, A M R; Albuquerque, M T D; Carvalho, P C S; Santos, A C T; Cunha, Pedro P

    2018-02-01

    The Alto da Várzea radium mine (AV) exploited ore and U-bearing minerals, such as autunite and torbernite. The mine was exploited underground from 1911 to 1922, closed in 1946 without restoration, and actually a commercial area is deployed. Stream sediments, soils and water samples were collected between 2008 and 2009. Stream sediments are mainly contaminated in As, Th, U and W, which is related to the AV radium mine. The PTEs, As, Co, Cr, Sr, Th, U, W, Zn, and electrical conductivity reached the highest values in soils collected inside the mine influence. Soils are contaminated with As and U and must not be used for any purpose. Most waters have pH values ranging from 4.3 to 6.8 and are poorly mineralized (EC = 41-186 µS/cm; TDS = 33-172 mg/L). Groundwater contains the highest Cu, Cr and Pb contents. Arsenic occurs predominantly as H 2 (AsO 4 ) - and H(AsO 4 ) 2- . Waters are saturated in goethite, haematite and some of them also in lepidocrocite and ferrihydrite, which adsorbs As (V). Lead is divalent in waters collected during the warm season, being mobile in these waters. Thorium occurs mainly as Th(OH) 3 (CO 3 ) - , Th(OH) 2 (CO 3 ) and Th(OH) 2 (CO 3 ) 2 2- , which increase water Th contents. Uranium occurs predominantly as UO 2 CO 3 , but CaUO 2 (CO 3 ) 3 2- and CaUO 2 (CO 3 ) 3 also occur, decreasing its mobility in water. The waters are contaminated in NO 2 - , Mn, Cu, As, Pb and U and must not be used for human consumption and in agricultural activities. The water contamination is mainly associated with the old radium mine and human activities. A restoration of the mining area with PTE monitoring is necessary to avoid a public hazard.

  4. Immobilization of radium in uranium mine and mill tailings

    International Nuclear Information System (INIS)

    Lutwick, G.D.; Mosher, J.; Tizzard, R.

    1982-01-01

    Radium has been coprecipitated from solution as the arsenate in which ferric iron, barium, copper and lead are the macro ions. The order of efficiency of the macro ions in removing radium was found to be Ba > Fe > Pb > Cu at a pH of 6. It is expected that at higher pH's i.e., greater than 8, ferric iron will change positions. This change in position will be caused by the formation of ferrate ion hence increasing the solubility of ferric arsenate. The removal of radium from solution by ion exchangers consisting of the arsenates of ferric iron, barium, copper and lead was successful. As the pH is increased from 4 to 10 the efficiency of these exchangers in removing radium increases. The columns removed over 99 percent of the radium at pH's of 5.6 and higher. The order of efficiency of the exchangers in removing radium is not well defined. Thorium has been precipitated as the arsenate over the pH range of 2 to 9.6. This reaction suggests the possibility of using arsenate to remove thorium from uranium mill plant streams and as a reagent to keep thorium in the tailings ponds

  5. Radioactivity of building materials

    International Nuclear Information System (INIS)

    Terpakova, E.

    2000-01-01

    In this paper the gamma-spectrometric determination of natural radioactivity in the different building materials and wares applied in Slovakia was performed. The specific activities for potassium-40, thorium, radium as well as the equivalent specific activities are presented

  6. Purification of radium-226 for the manufacturing of actinium-225 in a cyclotron for alpha-immunotherapy; Radium-Aufreinigung zur Herstellung von Actinium-225 am Zyklotron fuer die Alpha-Immuntherapie

    Energy Technology Data Exchange (ETDEWEB)

    Marx, Sebastian Markus

    2014-09-23

    The thesis describes the development of methods for the purification of Ra-226. The objective was to obtain the radionuclide in the quality that is needed to be used as starting material in the manufacturing process for Ac-225 via proton-irradiated Ra-226. The radionuclide has been gained efficiently out of huge excesses of impurities. The high purity of the obtained radium affords its use as staring material in a pharmaceutical manufacturing process.

  7. Hydrogeology of the Dakota Group aquifer with emphasis on the radium-226 content of its contained ground water, Canon City Embayment, Fremont and Pueblo Counties, Colorado

    International Nuclear Information System (INIS)

    Vinckier, T.A.

    1982-01-01

    The Dakota Group aquifer of the Canon City embayment comprises two primary water-bearing units, the Lytle Sandstone Member at the base and the Dakota Sandstone at the top, separated by the semiconfining, arenaceous Glencairn Shale Member. The ground water in this area probably represents a mixture of some or all of the following genetic types: (1) ground water connate to the Dakota Group; (2) ground water, connate or otherwise, entering the aquifer as leakage from adjacent semiconfining strata; (3) deeply circulated meteoric ground water; and (4) hydrothermal fluids (magmatic or metamorphic ground water) purged from the crystalline basement complex underlying the embayment. The contents of the radium-226 in ground water from 117 wells completed in part or all of the Dakota Group were determined by the dissolved radon-222 emanation method. Sixty-seven percent of the ground water samples have radium-226 activities greater than 5.0 picocuries per liter of water (5.0 pCi/1), the recommended maximum permissible concentration of radium-226 in drinking water established by the Environmental Protection Agency in 1973. Inspection of gamma-ray logs of about 20 wells revealed the presence of moderate to extremely high gamma radiation in strata of the Dakota Group, the Morrison Formation, the Fountain Formation, and in the crystalline basement rocks. High levels of radium-226 in drinking water supplies pose potentially serious health hazards to the users. Owners of wells producing such water supplies are advised to (1) install, at the homesite, ion exchange (filtering units) capable of removing 226 Ra 2 + ions and other aqueous radium species from the water or (2) effectively case out those stratigraphic intervals in the bore hole showing high gamma radiation preventing possible radium-rich ground water within these intervals from entering the well

  8. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  9. Estimating remediation costs for the Montclair radium superfund sites

    International Nuclear Information System (INIS)

    Turner, M.J.

    1995-01-01

    The Montclair/West Orange and Glen Ridge Superfund Sites, located in Essex County, NJ, are contaminated to varying degrees with radioactive materials. The waste originated from radium processing facilities prevalent in the area during the early 1900s. The design for remediation of these sites is managed by Bechtel National, Inc. on behalf of the United States Army Corps of Engineers, Kansas City District, which administers the project through an interagency agreement with the US Environmental Protection Agency (EPA). Design efforts for the project began in 1990. A portion of the scope, which is the topic of this article, was preparing the remediation costs estimates. These estimates were to be prepared from the detailed design packages; the Corps of Engineers required that the estimates were prepared using the Micro Computer-Aided Cost Estimating System (MCACES). This article discusses the design methods used, provides an overview of MCACES, and discusses the structure and preparation of the cost estimate and its uses. However, the main focus of the article is the methods used to generate the required project-specific cost estimate format for this project. 6 figs

  10. Purification of radium-226 for the manufacturing of actinium-225 in a cyclotron for alpha-immunotherapy

    International Nuclear Information System (INIS)

    Marx, Sebastian Markus

    2014-01-01

    The thesis describes the development of methods for the purification of Ra-226. The objective was to obtain the radionuclide in the quality that is needed to be used as starting material in the manufacturing process for Ac-225 via proton-irradiated Ra-226. The radionuclide has been gained efficiently out of huge excesses of impurities. The high purity of the obtained radium affords its use as staring material in a pharmaceutical manufacturing process.

  11. Behaviour of Radium in coastal marine water of India - Behaviour of Radium in coastal marine environment of India

    Energy Technology Data Exchange (ETDEWEB)

    Jha, S.K.; Sartandel, S.; Tripathi, R.M. [Environmental Radioactivity measurement Section, Health Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India)

    2014-07-01

    Kanyakumari which comprises the high natural background region reflects different ratio varying from 3.5 to 6.9. The Higher concentration ratio of {sup 228}Ra to {sup 226}Ra in coastal water of Rameswaram and Kanyakumari reflecting {sup 232}Th rich sources of terrigenous material in regions. The findings supported the fact that the area also comes under natural high radiation background at the south west of Indian peninsula due to the presence of heavy mineral containing monazite in the beach sand. In Arabian sea, {sup 226}Ra activity concentration were observed to be in the range of 1.5-2.9 Bq m{sup -3} with a mean of 2.2 Bq m{sup -3} while {sup 228}Ra was in the range of 2.5-8.6 Bq m{sup -3} with mean of 4.9 Bq m{sup -3}. The observed ratio at locations in Arabian sea indicates restricted circulation pattern of sea water. The activity concentrations for radium isotopes were found within the reported range of values from other coastal area. The radioactive database can be used as tracer for understanding processes and for assessing radioactivity inventory in the coastal marine environment in India. (authors)

  12. Port Radium start to finish life cycle: a case study on Canada's historic radium/uranium mine, initial operation and closure, concerns of the aboriginal Dene people, subsequent assessments, remediation - 59332

    International Nuclear Information System (INIS)

    Wiatzka, Gerd; Brown, Steve

    2012-01-01

    Document available in abstract form only. Full text of publication follows: This paper provides a life study cycle case study on the historic Port Radium mine. In addition to the history of operations, it discusses the unique and successful approach used to identify the key issues and concerns associated with the former radium, uranium and silver mining property and the program activities undertaken to define the remedial issues and options that ultimately lead to the development of a preferred remedial plan. The Port Radium Mine site, situated approximately 275 km north of Yellowknife on the east shore of Great Bear Lake, Northwest Territories, was operated almost continuously between 1932 and 1982, initially for recovery of radium and uranium and subsequently for recovery of silver. Tailings production equalled an estimated 900, 000 tons from uranium ore processing and 800, 000 tons from silver processing operations. While the site was decommissioned at mine closure, site investigations were undertaken to address concerns expressed by residents of the community of Deline about residual contamination at the site and exposure of Deline residents as traditional land users and to identify residual environmental and safety issues based on current closure standards. Assessment of past radiation exposures of worker based on past practices associated with ore handling and concentrate shipping were also addressed. The paper provides insights into the approach and activities undertaken over a seven (7) year period that ultimately concluded with the final decommissioning of the site in 2007 and post remedial actions being carried out under the long term care and maintenance program. (authors)

  13. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  14. Depletion of barium and radium-226 in Black Sea surface waters over the past thirty years

    International Nuclear Information System (INIS)

    Kenison Falkner, K.K.; Edmond, J.M.; O'Neill, D.J.; Todd, J.F.; Moore, W.S.

    1991-01-01

    The nearly landlocked waters of the Black Sea support a valuable fishery, but are also particularly vulnerable to anthropogenic disturbance. Here we use dissolved barium and radium-226 as tracers, to investigate the biogeochemical health of the sea. Both elements are brought to surface waters by vertical mixing of deeper, enriched waters, and by rivers; these inputs should ordinarily be balanced by outflow of surface waters at the Bosphorus, and by biologically mediated removal of 226 Ra-bearing barite. We show, however, that surface-water inventories have been substantially depleted over the past few decades: recent (1988-89) barium concentrations were 1.6 times lower than in 1958 and 1967. These observations suggest that steady-state cycling of these elements has been perturbed by increased primary productivity, presumably fuelled by nutrients from industry and agricultural runoff, and to a lesser extent by decreased fluvial sediment loads owing to extensive impoundment of rivers in the region. (author)

  15. Radium activity measurements in bottled mineral water

    International Nuclear Information System (INIS)

    Kappke, Jaqueline; Paschuk, Sergei A.; Correa, Janine N.; Denyak, Valeriy; Reque, Marilson; Rocha, Paschuk; Rocha, Zildete; Santos, Talita O.

    2011-01-01

    This work presents the preliminary results of 226 Ra activity measurements of fifteen samples of bottled mineral water acquired at markets of Curitiba-PR, Brazil. The measurements were performed at the Laboratory of Applied Nuclear Physics of the Federal University of Technology - Parana (UTFPR) in collaboration with the Center of Nuclear Technology Development of Brazilian Nuclear Energy Committee (CNEN). The experimental setup was based on the electronic radon detector RAD7 (Durridge Company, Inc.). The measurements were carried out with a special kit of accessory vessels (vials) RAD7 H 2 O, which allows one to identify the 222 Rn activity concentration in small water samples of 40 mL and 250 mL in the range going from less than 30 pCi/L to greater than 10 5 pCi/L. During each measurement a vial from RAD H 2 O was poured with a sample of water. The air pump, included in the close loop aeration circuit and connected to the vial and RAD7 detector, operated for five minutes to snatch the sample of air maintained above the level of water sample and transporting it from the vial through the system. Evaluation of the concentration of soluble radium ( 226 Ra) salts in water and their activity was performed after 30 days when 222 Rn in the water samples reached secular equilibrium. The background measurements were performed using the samples of the distilled water. Considering the importance of background measurements, it was found that the value suggested by user Manual protocol (RAD7) for the case of low activity radon measurements, has to be slightly modified. (author)

  16. Sulphur-bearing Compounds Detected by MSL SAM Evolved Gas Analysis of Materials from Yellowknife Bay, Gale Crater, Mars

    Science.gov (United States)

    McAdam, A. C.; Franz, H. B.; Archer, P. D. Jr.; Sutter, B.; Eigenbrode, J. L.; Freissinet, C.; Atreya, S. K.; Bish, D. L.; Blake, D. F.; Brunner, A.; hide

    2014-01-01

    The Sample Analysis at Mars (SAM) and Chemistry and Mineralogy (CheMin) instruments on the Mars Science Laboratory (MSL) analysed several subsamples of sample fines (bearing phases present below the CheMin detection limit or difficult to characterize with XRD (e.g., X-ray amorphous phases). Here, we focus on potential constraints on phases that evolved SO2, H2S, OCS, and CS2 during thermal analysis.

  17. Nitric acid leaching of radium and other significant radionuclides from uranium ores and tailings

    International Nuclear Information System (INIS)

    Ryon, A.D.; Hurst, F.J.; Seeley, F.G.

    1977-08-01

    Nitric acid leaching of representative uranium ores and mill tailings from the western U.S. mining districts removes up to 98% of the 226 Ra and 230 Th, yielding a residue containing 17 to 60 pCi of radium per gram. At best, this is an order of magnitude greater than that in surrounding soils, but about the same level as a standard proposed for building materials in the United Kingdom. Data are also presented on the water penetration and leaching of tailings, the solubility of BaSO 4 , and radon emanation coefficients of ores, tailings, and nitric acid-leached residues

  18. The determination of radium-226 in uranium ores and mill products by alpha energy spectrometry

    International Nuclear Information System (INIS)

    Zimmerman, J.B.; Armstrong, V.C.

    1975-12-01

    A reliable routine procedure for determining 226 Ra by alpha energy spectrometry is described. Radium is isolated as sulphate from the sample matrix by co-precipitation with a small mass of barium and analysed using a ruggedized silicon surface barrier detector. The method is capable of providing high accuracy over a large 226 Ra concentration range and is applicable to materials such as uranium ores, uranium mill products and effluent streams. Samples resulting from nitric acid leach experiments with Elliot Lake ores were examined using the procedure. The distribution of 223 Ra, 224 Ra and 226 Ra between the leach products, (residue and leach liquor), is discussed. (author)

  19. Determination of Uranium, Thorium and Radium 226 in Zircon containig sands by alpha spectrometry

    International Nuclear Information System (INIS)

    Spezzano, P.

    1985-01-01

    The industrial utilization of Zircon sands for the production of refractories presents radiological problems owing to the risk of inhalation of Uranium, Thorium and their decay products, present in high concentrations in such materials. A method of analysis was realized for the determination of Uranium, Thorium and Radium-226 in Zircon sands, including the total dissolution of the sample, radiochemical separation and final measurement by alpha spectrometry with surface barrier detector. The concentrations of the main alpha-emitting radionuclides presents in two samples of Zircon sands have been determined and the possibility of disequilibrium along the decay series has been pointed out

  20. Quality control of the analysis of IAEA samples in the radium institute

    International Nuclear Information System (INIS)

    Belyaev, B.N.; Lovtsus, A.V.; Makarova, T.P.; Stepanov, A.V.

    1989-01-01

    Metrological chracteristics of mass and alpha spectrometric methods in the Radium Institute for analysis of spent fuel control samples are evaluated. The techniques of analysis and the procedure of quality control for isotopic ratio measurements based on the use of uranium and plutonium standard reference materials (NBS, NBL, SAL made in USSR) are described. The results of measurements performed during cooperation with IAEA are discussed, and the sources of systematic and random errors are analyzed. The results obtained agree well with the target values. (author)

  1. GAS BEARING

    Science.gov (United States)

    Skarstrom, C.W.

    1960-09-01

    A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

  2. Physico-chemical forms and migration in continental waters of radium from uranium mining and milling

    International Nuclear Information System (INIS)

    Benes, P.

    1982-01-01

    Recent advances in knowledge of the physico-chemical forms and migration of radium in continental waters are reviewed and recommendations for future research in this field are given. Computations of solution equilibria based on the reported and newly determined stability constants and solubilities of radium compounds show that a significant percentage of dissolved radium can exist in some waste and natural waters as an RaSO 4 ion pair, besides a significant percentage of Ra 2+ ions. The formation of a solid phase consisting mainly of sparingly soluble radium compounds can be excluded in waste and natural waters. Model experiments revealed that radium can be bound in complexes with some as yet unidentified ligands, probably of organic nature. Direct determinations of the physico-chemical forms of radium in surface and groundwaters were mostly confined to the analysis of the ratio of dissolved to particulate forms of radium. Ratios from 0.01 to 100 were found, depending on the type of water examined. Recently a newly suggested method of selective dissolution was applied to characterize the nature of particulate forms of radium in surface waters. Migration of radium is reviewed, covering the release of radium from its source, its transport in ground and surface waters and its deposition in various sinks. Factors influencing radium release from the sources into the hydrosphere are discussed. The following processes affecting radium migration are discussed: adsorption of dissolved radium on suspended solids and bottom sediments, coprecipitation of radium with solids formed in waste waters or in natural waters, sedimentation of particulate forms of radium in reservoirs and streams, resuspension of bottom sediments and dissolution of radium from suspended solids or bottom sediments

  3. Principal aquifers can contribute radium to sources of drinking water under certain geochemical conditions

    Science.gov (United States)

    Szabo, Zoltan; Fischer, Jeffrey M.; Hancock, Tracy Connell

    2012-01-01

    What are the most important factors affecting dissolved radium concentrations in principal aquifers used for drinking water in the United States? Study results reveal where radium was detected and how rock type and chemical processes control radium occurrence. Knowledge of the geochemical conditions may help water-resource managers anticipate where radium may be elevated in groundwater and minimize exposure to radium, which contributes to cancer risk. Summary of Major Findings: * Concentrations of radium in principal aquifers used for drinking water throughout the United States generally were below 5 picocuries per liter (pCi/L), the U.S. Environmental Protection Agency (USEPA) maximum contaminant level (MCL) for combined radium - radium-226 (Ra-226) plus radium-228 (Ra-228) - in public water supplies. About 3 percent of sampled wells had combined radium concentrations greater than the MCL. * Elevated concentrations of combined radium were more common in groundwater in the eastern and central United States than in other regions of the Nation. About 98 percent of the wells that contained combined radium at concentrations greater than the MCL were east of the High Plains. * The highest concentrations of combined radium were in the Mid-Continent and Ozark Plateau Cambro-Ordovician aquifer system and the Northern Atlantic Coastal Plain aquifer system. More than 20 percent of sampled wells in these aquifers had combined radium concentrations that were greater than or equal to the MCL. * Concentrations of Ra-226 correlated with those of Ra-228. Radium-226 and Ra-228 occur most frequently together in unconsolidated sand aquifers, and their presence is strongly linked to groundwater chemistry. * Three common geochemical factors are associated with the highest radium concentrations in groundwater: (1) oxygen-poor water, (2) acidic conditions (low pH), and (3) high concentrations of dissolved solids.

  4. Grizzly bear

    Science.gov (United States)

    Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

    2003-01-01

    The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

  5. Effect of duration of exposure to RaCl2 and a radium apatite from freshwater mussels on intestinal transport and bone deposition of radium

    International Nuclear Information System (INIS)

    Domel, R.U.; Beal, A.M.

    1997-01-01

    Natural leaching of uranium ore bodies can result in 226 Ra pollution of adjacent waterways and consequent incorporation of radium into the food chain. Mining has the potential to augment this effect. In the Magela flood plain, Northern Territory, the freshwater mussel (Velesunio angasi) concentrates radium in its tissues as a phosphate compound. The availability of mussel radium for uptake and tissue incorporation was assessed relative to radium chloride using rats. The results were compared for jejunal transport (in situ in vivo, ligated segment using anaesthetised animals) and feed trial experiments. In addition, the influence of age and duration of dosage (hours in the case of the jejunal transport and weeks in the feed trial studies) were investigated. Mussel radium transport across the jejunum of adults and juveniles (<0.3%) was very small when compared to radium chloride (50% injected dose). The amount of mussel radium available for intestinal uptake in the feed trials was also low (<0.5%) but significant when compared to the uptake of radium chloride (< 1.5%). Incorporation of mussel radium into bone was less than that of radium chloride (p=0.0001) for both adults and juveniles. Extrapolation of the data from the animal model to humans suggests that eating these mussels carries with it only a low risk of exceeding the Annual Limit of Intake (ALI) set for members of the public, even in juveniles

  6. Effect of duration of exposure to RaCl{sub 2} and a radium apatite from freshwater mussels on intestinal transport and bone deposition of radium

    Energy Technology Data Exchange (ETDEWEB)

    Domel, R U [Australian Nuclear Science and Technology Organsiation, Lucas Heights, NSW (Australia). Environment Division; Beal, A M [University of New South Wales, NSW (Australia). Biological Science

    1997-10-01

    Natural leaching of uranium ore bodies can result in {sup 226}Ra pollution of adjacent waterways and consequent incorporation of radium into the food chain. Mining has the potential to augment this effect. In the Magela flood plain, Northern Territory, the freshwater mussel (Velesunio angasi) concentrates radium in its tissues as a phosphate compound. The availability of mussel radium for uptake and tissue incorporation was assessed relative to radium chloride using rats. The results were compared for jejunal transport (in situ in vivo, ligated segment using anaesthetised animals) and feed trial experiments. In addition, the influence of age and duration of dosage (hours in the case of the jejunal transport and weeks in the feed trial studies) were investigated. Mussel radium transport across the jejunum of adults and juveniles (<0.3%) was very small when compared to radium chloride (50% injected dose). The amount of mussel radium available for intestinal uptake in the feed trials was also low (<0.5%) but significant when compared to the uptake of radium chloride (< 1.5%). Incorporation of mussel radium into bone was less than that of radium chloride (p=0.0001) for both adults and juveniles. Extrapolation of the data from the animal model to humans suggests that eating these mussels carries with it only a low risk of exceeding the Annual Limit of Intake (ALI) set for members of the public, even in juveniles 18 refs., 5 figs.

  7. Dose-effect relationships for the US radium dial painters

    International Nuclear Information System (INIS)

    Thomas, R.G.

    1995-01-01

    Dose-response data are presented from a large percentage of the US workers who were exposed to radium through the painting of luminous dials. The data in this paper are only from females, because very few males worked in this occupation. Log-normal analyses were done for radium-induced bone sarcomas and head carcinomas after the populations of the respective doses were first determined to be log-normally distributed. These populations included luminisers who expressed no radium-related cancerous condition. In this study of the female radium luminisers, the most important data concerning radiation protection are probably from workers who were exposed to radium but showed no cancer incidence. A total of 1391 subjects with average measured skeletal doses below 10 Gy are in this category. A primary purpose is to illustrate the strong case that 226,228 Ra is representative of those radionuclides that exemplify in humans a 'threshold' dose, a dose below which there has been no observed health effects on the exposed individual. Application of a threshold dose for radium deposited in the skeleton does not mean to imply that any other source of skeletal irradiation should be considered to follow a similar pattern. Second, a policy issue that begs for attention is the economic consequence of forcing radiation to appear as a highly toxic insult. It is time to evaluate the data objectively instead of formatting the extrapolation scheme beforehand and forcing the data to fit a preconceived pattern such as linearity through the dose-effect origin. In addition, it is time to re-evaluate (again) variations in background radiation levels throughout the world and to cease being concerned with, and regulating against, miniscule doses for which no biomedical effects on humans have ever been satisfactorily identified or quantified. (author)

  8. Natural Radium-226 accumulation in the human thyroid gland

    International Nuclear Information System (INIS)

    Simon, Steven L.; Ibrahim, Shawki A.; Barden, Adam O.; VanMiddlesworth, Lester

    2008-01-01

    Full text: Small amounts of Ra-226 and other radium isotopes routinely enter the human body through normal dietary intake and, in some cases, through occupational exposure. Currently accepted biokinetic models for radium in the human body assume a uniform distribution among all soft tissues and a short retention time in those tissues. These assumptions persist despite publications in the mid-1980s indicating that radium concentrations in tissue are related to calcium levels in each organ, implying that the thyroid gland could accumulate greater concentrations of radium isotopes than any other tissue. Moreover, the natural intake or production of sulfate or barium compounds in the body could serve to precipitate radium in the thyroid gland, thereby immobilizing it, with the result that the radionuclide stays resident for many years. Evidence of both accumulation and immobilization of Ra-226 in thyroids of grazing animals has been documented since the 1960s by one of us (LVM). Little is known, however, about the concentration and retention of radium in the human thyroid. Reported here, for the first time, are Ra-226 measurement data from about 100 human thyroids collected from over 95 persons with no known occupational exposure to radium with lifetime residences in the US and other countries, one person who routinely ingested a homeopathic preparation containing Ra-226, and three uranium miners. Sensitive measurements were made using the radon emanation technique. Regardless of the origin of the thyroid sample, Ra-226 activity was almost always detected above the detection limit of 0.65 mBq when at least 10 g of thyroid tissue were available. Our analyses to-date suggests a background concentration in human thyroids of about 0.1 ±0.01 Bq/kg, considerably greater than the commonly reported literature value of 0.003 Bq/kg in soft tissues. In addition, our measurements indicate concentrations of Ra-226 in the three uranium miners (whose exact job description was

  9. Radon/radium detection increases uranium drilling effectiveness

    International Nuclear Information System (INIS)

    Morse, R.H.; Cook, L.M.

    1979-01-01

    The use of portable radon detectors has become routine in reconnaissance uranium surveys where water and sediment samples are analyzed in field labs for radon and radium, and in detailed work where drill hole locations are pinpointed by field determinations of radon in soil gas from shallow holes. During the drilling program itself, however, very few operators are taking advantage of radon and radium analyses to decide whether a barren drill hole was a near miss or whether the immediate area can be written off. The technique, which is outlined here, is effective both above and below the water table

  10. Regularities of radium coprecipitation with barium sulfate from salt solutions

    International Nuclear Information System (INIS)

    Kudryavskij, Yu.P.; Rakhimova, O.V.

    2007-01-01

    Coprecipitation of radium with barium sulfate from highly concentrated NaCl solutions is studied, including the effects of the initial solution composition, alkaline reagent (CaO, NaOH), supporting electrolyte (NaCl) concentration, and pH. The process is promoted by high NaCl concentration in the initial solution, which is due to structural transformation and change in the sorption activity of the BaSO 4 precipitate in salt solutions. The results obtained were applied to recovery of radium from process solutions during the development and introduction of improved procedure for disinfection and decontamination of waste yielded by chlorination of loparite concentrates [ru

  11. The influence of radium therapie on the yeast contamination of the vagina

    International Nuclear Information System (INIS)

    Mendling, W.; Schnell, J.D.; Spiecker, R.; Sankt Franziskus-Hospital, Bielefeld

    1979-01-01

    Before the beginning of radium therapy a vaginal yeast contamination of 9,7% was found of 113 patients with various genital carcinomas. However, the incidence of vaginal yeast contamination increased suddenly to 30,9% under the contac irradiation therapy with radium. The radiation effect of radium is not sufficient for a 'selfsterilisation' of the radium-carrier in the case of yeast contamination. Therefore, a chemic desinfection of the radium-carriers is principly necessary. The significance is discussed and the recommendation is made that routine mycological supervision be carried out on all patients with gynaecological carcinomas and appropriate antimycotic therapy initiated where necessary. (orig.) [de

  12. Encapsulation, shielding, and packaging for conditioning of spent radium sources

    International Nuclear Information System (INIS)

    Kang, I. S.; Kim, T. K.; Lee, B. C.; Kim, G. J.; Hong, K. P.

    2002-01-01

    The appropriate management and conditioning of spent radium sources have been risen to one of the greatest challenges faced by the international society. The expert teams in Korea were organized to tackle this problem by the request of IAEA and supported to condition sources in Southeastern Asia. The main object of this paper is to apply safely and effectively conditioning of spent sealed sources in our country near future by virtue of describing the technology on conditioning the national inventory of spent radium sources in Singapore. The paper is the result that the Korean expert team successfully carried out the conditioning of spent radium sources in Singapore with accumulated experiences. The conditioning operation was carried out under the supervision of IAEA's technical officer, Mr. Al-Mughrabi and Singapore Nuclear Cancer Centre. The 204 sources of spent radium stored in Singapore were encapsuled and welded in 17 small capsules and a large capsule, and conditioned in 2 lead shields, producing 2 package. As a result of this operation, a total amount of 938.56mg were conditioned and distributed into 2 shielding devices, holding 497.5mg and 441.06mg. In addition, the contaminated objects and the secondary wastes produced during segregation and dismantling of sources were immobilized in a plastic box

  13. The removal of radium during the production of nitrophosphate fertilizer

    International Nuclear Information System (INIS)

    Awadalla, F.T.; Habashi, F.

    1985-01-01

    In the nitric acid leaching of phosphate rock 20 kg of barium nitrate can be added to the leach solution followed by 20 kg of potassium sulfate per ton rock to produce 23 kg of a precipitate having the composition Basub(0.6)Casub(0.4)SO 4 containing nearly all the radium present in the rock. (orig.)

  14. Marie Sklodowska-Curie, polonium, radium and radiochemistry

    International Nuclear Information System (INIS)

    Guillaumont, R.

    2011-01-01

    In this work, the author describes how the methodology developed by Marie Curie in discovering polonium and radium has contributed to greater scientific discoveries and how these discoveries have played a great part in the development of science in general and have particularly enriched chemistry. (O.M.)

  15. Survival times of pre-1950 US women radium dial workers

    International Nuclear Information System (INIS)

    Stehney, A.F.

    1994-01-01

    Survival times of US women radium dial workers to the end of 1989 were examined by life table methods. Included were 1301 women rust employed before 1930 and 1242 first employed in 1930-1949. Expected numbers of deaths were estimated from age- and time-specific death rates for US white females. In the early group, 85 deaths from the well-known radium-induced cancers - bone sarcomas and head carcinomas - were observed, but only 724 deaths from aH other causes were observed vs 755 expected. Life shortening (±S.E.) of 1.8 ±0.5 y compared to the general population of US white females was calculated from the time distribution of all deaths in the pre-1930 group. In the 1930--1949 group, 350 deaths were observed vs 343 expected and no bone sarcomas or head carcinomas occurred. Among women who survived at least 2 y after rust measurement of body radium, a significant excess of observed vs expected deaths was found only for radium intakes greater than 1.85 MBq of 226 Ra + 228 Ra, and no trend of deaths or reduction of life expectancy was found with length of employment

  16. Denver Radium Boom and the Colorado School of Mines

    International Nuclear Information System (INIS)

    Hart, S.S.

    1986-01-01

    The November 7, 1985, Rocky Mountain News, proclaimed Radiation hot spot detected at Mines. This hot spot discovery was the result of investigative reports by a local television station, with follow-up radiation monitoring by the Colorado Department of Health. Not an isolated occurrence of alpha and gamma radiation contamination, the School of Mines discovery is only the latest in a five-year series of discoveries of radioactive waste disposal sites in the Denver metropolitan area. These discoveries have involved not only the Colorado Department of Health, but also the Environmental Protection Agency, at least five consulting firms, and numerous businessmen and homeowners. In 1982, the sites were combined into a single project called the Denver Radium Site and selected for clean-up under the Federal Superfund program. This paper reviews the historical aspects of these hot spots by describing the history of radium processing in Denver; early work of the Colorado School of Mines, National Radium Institute, the Golden Experiment Station, and other institutional research; and the commercial production of radium. 20 references

  17. The rays of life, centennial of discovery of Radium

    International Nuclear Information System (INIS)

    Constantin, Enrique; Plazas, Maria C.

    1999-01-01

    The authors make a recount from the discovery of the rays X for William Conrad Roentgen, in November of 1.985, until our days of the main discoveries and advances in medicine, having like base the radium and their importance in the treatment of the cancer

  18. Searches for permanent electric dipole moments in Radium isotopes

    NARCIS (Netherlands)

    Willmann, L.; Jungmann, K.; Wilschut, H.W.

    2010-01-01

    Permanent electric dipole moments are uniquely sensitive to sources of T and P violation in fundamental interactions. In particular radium isotopes offer the largest intrinsic sensitivity. We want to explore the prospects for utilizing the high intense beams from HIE-ISOLDE to boost the statistical

  19. Prevalence of technical mesothorium in self-luminous compounds used by New Jersey radium dial workers

    International Nuclear Information System (INIS)

    Keane, A.T.; Holtzmann, R.B.; Rundo, J.

    1994-01-01

    Forty-five sealed glass ampoules containing samples of radium dial paint prepared by the US Radium Corporation (USRC) and used by New Jersey dial workers in the period 1915--1928, were analyzed for radium-226 and radium-228 activity by high-resolution gamma-ray spectrometry. Radium-228 was found to be the dominant activating agent at the probable time of use in most of the sampled paints in which the ratio of radium-228 to radium-226 activity was determinable, the calculated radium-228 to radium-226 activity ratio in 1920 in these ranging from 7.2 to 10 (median 8.4), indicating that radium element chemically separated from commercialthorium ores (technical mesothorium) was used as the activator. Published isotopic activity ratios in USRC dial-paint samples that were appreciably in excess of those we found are shown invariably to be due to errors in calculation. Our results and information in the early literature suggested the hypothesis that dial paints used at USRC before July 1919 were activated with isotopically pure radium-226 whereas compounds used thereafter until the year 1925 were activated with technical mesothorium- Isotopic activity ratios predicted by the hypothesis compared well with median ratios observed in two groups of former workers. We conclude that inaccuracies in dates of hire and termination at USRC might well be the principal source of uncertainty in estimates of skeletal dose for former workers in whom the isotopic activity ratio has not been measured

  20. Radium 226 and uranium isotopes simultaneously determination in water samples using liquid scintillation counter

    International Nuclear Information System (INIS)

    Al-Masri, M.S.; Al-Akel, B.; Saaid, S.; Nashawati, A.

    2007-04-01

    In this work a method has been developed to determine simultaneously Radium 226 and Uranium isotopes in water samples by low back ground Liquid Scintillation Counter. Radium 226 was determined by its progeny Polonium 214 after one month of sample storage in order to achieve the equilibrium between Radium 226 and Polonium 214. Uranium isotopes were determined by subtracting Radium 226 activity from total alpha activity. The method detection limits were 0.049 Bq/L and 0.176 Bq/L for Radium 226 and Uranium isotopes respectively. The repeatability limits were ± 0.32 Bq/L and ± 0.9 Bq/L for Radium 226 and Uranium isotopes respectively. While relative errors were % 9.5 and %18.2 for Radium 226 and Uranium isotopes respectively. On the other hand, the report presented the results of different standard and natural samples.(author)

  1. Determination of radium-226 by high-resolution alpha spectrometry

    International Nuclear Information System (INIS)

    Sill, C.W.

    1983-01-01

    The determination of radium-226 by alpha spectrometry has been investigated critically to determine experimental conditions under which high resolution and accurate and reliable results can be obtained. Refractory solids such as soils, ores, and tailings from uranium mills are dissolved completely by fusion with potassium fluoride in the presence of barium-133 tracer. The fluoride cake is then transposed with sulfuric acid to a pyrosulfate fusion with simultaneous volatilization of all silica and fluoride. Radium is precipitated with barium already present in the sample by addition of lead perchlorate to a dilute hydrochloric acid solution of the pyrosulfate cake. The resulting insoluble sulfates are dissolved in an alkaline solution of diethylenetriaminepentaacetic acid, and the radium and barium sulfates are reprecipitated with acetic acid. The precipitate is mounted on a membrane filter and analyzed by alpha spectrometry. Water samples are partially evaporated and treated similarly. Resolution of the subsequent alpha spectra is much better than has been achieved previously from barium sulfate, and is almost as good as is obtainable with actinides electrodeposited on polished steel plates. The resolution is about 60 keV full-width-half-maximum with 100 μg of barium on a 1-inch filter with a 450 mm 2 detector at 20% counting efficiency. Recovery is about 97% and accuracy is generally as good as the counting statistics obtained will permit. Grossly inaccurate results can be obtained under certain conditions when barium-133 tracer is used to determine the chemical yield of radium-226. Severe contamination of the surface-barrier detector by polonium-210 and by recoil products of the radium isotopes being counted is demonstrated, amd methods for virtual elimination of both problems are discussed

  2. Public health implications of radioluminous materials

    International Nuclear Information System (INIS)

    Moghissi, A.A.; Carter, M.W.

    1975-07-01

    The safety, efficacy, and relative merits of radium, tritium, and promethium in radioluminous materials, particularly as used in the dial paint of timepieces and instruments, were evaluated. The reduced use of radium in recent years is reflected in estimates of the population dose for 1973--3600 person-rem from 24 million tritium watches versus 2500 person-rem from 8.4 million radium clocks. Had radium still been used in watches, the dose could have been significantly higher. No reliable data are available on the activity of promethium used for this purpose. Assuming a minimum dose of 6100 person-rem from all these radionuclides, an average of 0.03 mrem/year is estimated for the U.S. population. Because of the unavoidable radiation hazard, it is recommended that radium no longer be used in radioluminous materials. Furthermore, the 'frivolous' use of other radionuclides for this purpose should be discouraged

  3. Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

    NARCIS (Netherlands)

    Jamari, J.; Ismail, R.; Anwar, I.B.; Saputra, E.; Tauviqirrahman, M.; Heide, E. van der

    2016-01-01

    Tribological properties of materials used in biomedical implants will critically affect the performance of the implant. Ultra-high molecular weight polyethylene (UHMWPE) material is popular due to its great properties. Surface texturing is one of the methods to minimize friction and wear. In this

  4. Buildings materials and raw materials as a source of exposition of population of the Slovak Republic

    International Nuclear Information System (INIS)

    Cabanekova, H.

    2005-01-01

    In this presentation author presents specific activities of potassium-40, radium-226, thorium-232 and equivalent of specific activity in some building materials and raw materials used at building-up of flats in the Slovak Republic

  5. Practical recommendations for radium-223 treatment of metastatic castration-resistant prostate cancer

    International Nuclear Information System (INIS)

    Du, Yong; Carrio, Ignasi; De Vincentis, Giuseppe; Fanti, Stefano; Ilhan, Harun; Mommsen, Caroline; Nitzsche, Egbert; Sundram, Francis; Vogel, Wouter; Oyen, Wim; Lewington, Val

    2017-01-01

    Radium Ra 223 dichloride (radium-223, Xofigo registered) is the first targeted alpha therapy for patients with castration-resistant prostate cancer and symptomatic bone metastases. Radium-223 provides a new treatment option for this setting, but also necessitates a new treatment management approach. We provide straightforward and practical recommendations for European nuclear medicine centres to optimize radium-223 service provision. An independent research consultancy agency observed radium-223 procedures and conducted interviews with all key staff members involved in radium-223 treatment delivery in 11 nuclear medicine centres across six countries (Germany, Italy, the Netherlands, Spain, Switzerland and the UK) experienced in administering radium-223. The findings were collated and discussed at a meeting of experts from these centres, during which key consensus recommendations were defined. The recommendations cover centre organization and preparation; patient referral; radium-223 ordering, preparation and disposal; radium-223 treatment delivery/administration; and patient experience. Guidance includes structured coordination and communication within centres and multidisciplinary teams, focusing on sharing best practice to provide high-quality, patient-centred care throughout the treatment pathway. These expert recommendations are intended to complement existing management guidelines. Sharing best practice and experience will help nuclear medicine centres to optimize radium-223 service provision and improve patient care. (orig.)

  6. Practical recommendations for radium-223 treatment of metastatic castration-resistant prostate cancer

    Energy Technology Data Exchange (ETDEWEB)

    Du, Yong [The Royal Marsden NHS Foundation Trust, Department of Nuclear Medicine and PET/CT, London (United Kingdom); Carrio, Ignasi [Hospital Sant Pau, Barcelona (Spain); De Vincentis, Giuseppe [Policlinico Umberto I University Hospital Rome, Rome (Italy); Fanti, Stefano [University Hospital Bologna, Bologna (Italy); Ilhan, Harun [Ludwig-Maximilians-University Hospital, Munich (Germany); Mommsen, Caroline [Praxis fuer diagnostische und therapeutische Nuklearmedizin Berlin, Berlin (Germany); Nitzsche, Egbert [Canton Hospital Aarau, Aarau (Switzerland); Sundram, Francis [University Hospital Southampton NHS Foundation Trust, Southampton (United Kingdom); Vogel, Wouter [The Netherlands Cancer Institute, Amsterdam (Netherlands); Oyen, Wim [The Royal Marsden NHS Foundation Trust, Department of Nuclear Medicine and PET/CT, London (United Kingdom); The Institute of Cancer Research, London (United Kingdom); Lewington, Val [Guy' s and St Thomas' NHS Foundation Trust, London (United Kingdom)

    2017-09-15

    Radium Ra 223 dichloride (radium-223, Xofigo registered) is the first targeted alpha therapy for patients with castration-resistant prostate cancer and symptomatic bone metastases. Radium-223 provides a new treatment option for this setting, but also necessitates a new treatment management approach. We provide straightforward and practical recommendations for European nuclear medicine centres to optimize radium-223 service provision. An independent research consultancy agency observed radium-223 procedures and conducted interviews with all key staff members involved in radium-223 treatment delivery in 11 nuclear medicine centres across six countries (Germany, Italy, the Netherlands, Spain, Switzerland and the UK) experienced in administering radium-223. The findings were collated and discussed at a meeting of experts from these centres, during which key consensus recommendations were defined. The recommendations cover centre organization and preparation; patient referral; radium-223 ordering, preparation and disposal; radium-223 treatment delivery/administration; and patient experience. Guidance includes structured coordination and communication within centres and multidisciplinary teams, focusing on sharing best practice to provide high-quality, patient-centred care throughout the treatment pathway. These expert recommendations are intended to complement existing management guidelines. Sharing best practice and experience will help nuclear medicine centres to optimize radium-223 service provision and improve patient care. (orig.)

  7. Superconducting composite for magnetic bearings

    International Nuclear Information System (INIS)

    Rigney, T.K. II.

    1995-01-01

    A composite includes granules of Type II superconducting material and granules of rare-earth permanent magnets that are distributed in a binder. The composite is a two-phase structure that combines the properties of the superconductor and magnets with the flexibility and toughness of a polymeric material. A bearing made from this composite has the load capacity and stiffness of a permanent magnet bearing with added stability from a Type II superconducting material. 7 figs

  8. Determination of uranium, thorium and radium isotope ratio

    International Nuclear Information System (INIS)

    Sokolova, Z.A.

    1983-01-01

    The problems connected with the study of isotope composition of natural radioactive elements in natural objects are considered. It is pointed out that for minerals, ores and rocks the following ratios are usually determined: 234 U/ 238 U, 230 Th/ 238 U, 226 Ra/ 238 U, 228 Th/ 230 Th, 228 Th/ 232 Th and lead isotopes; for natural waters, besides the enumerated - 226 Ra/ 228 Ra. General content of uranium and thorium in the course of isotope investigations is determined from separate samples, most frequently by the X-ray spectral method, radium content - by usual radiochemical method, uranium and radium content in waters -respectively by calorimetric and emanation methods. Radiochemical preparation of geologic powder and aqueous samples for isotope analysis is described in detail. The technique of measuring and calculating isotope ratios (α-spectrometry for determining isotope composition of uranium and thorium and emanation method for determining 226 Ra/ 228 Ra) is presented

  9. Collinear resonance ionization spectroscopy of exotic francium and radium isotopes

    CERN Document Server

    AUTHOR|(CDS)2094150

    Two experimental campaigns were performed at the Collinear Resonance Ionization Spectroscopy (CRIS) experiment, located at the ISOLDE radioactive-beam facility. The spectroscopic quadrupole moment of $^{203}$Fr was measured. Its magnitude with respect to the other even-$N$ francium isotopes below $N = 126$ suggests an onset of static deformation. However, calculations of the static and total deformation parameters reveal that it cannot be considered as purely statically deformed. The neutron-rich radium isotopes were investigated. The spectroscopic quadrupole moment of $^{231}$Ra was measured and the continuation of increasing quadrupole deformation with neutron number in neutron-rich radium isotopes was further established. Measurements of the changes in mean-square charge radii of $^{231,233}$Ra allowed the odd-even staggering parameter to be calculated for $^{230-232}$Ra. A normal odd-even staggering which increases in magnitude with neutron number was observed in these isotopes.

  10. The Radium Terrors. Science Fiction and Radioactivity before the Bomb.

    Science.gov (United States)

    Candela, Andrea

    2015-01-01

    At the beginning of the 20th century the collective imagination was fascinated and terrified by the discovery of radium. A scientific imagery sprang up around radioactivity and was disseminated by public lectures and newspaper articles discussing the ambiguous power of this strange substance. It was claimed that radium could be used to treat cholera, typhus and tuberculosis, but at the same time there were warnings that it could be used for military purposes. The media and the scientists themselves employed a rich vocabulary influenced by religion, alchemy and magic. The ambivalent power of radioactive elements exerted a great influence on science fiction novelists. This paper will examine some significant works published in Europe, America and Russia during the first decades of the 20th century and their role in the creation of the complex imagery of radioactivity that seized the public imagination long before the invention of the atomic bomb.

  11. Neoplasms following childhood radium irradiation of the nasopharynx

    International Nuclear Information System (INIS)

    Sandler, D.P.; Comstock, G.W.; Matanoski, G.M.

    1982-01-01

    Eighteen to 35 years after admission to a clinic for the prevention of deafness, no increased overall cancer risk could be detected among 904 persons who had been treated with nasopharyngeal radium irradiation when compared with the risk among 2,021 persons who were either treated surgically or not treated at all, although there were differences at specific sites. An increased risk of developing both benign and malignant head and neck tumors was found among irradiated persons. Whereas no one head and neck site showed a statistically significant excess, a slight excess of brain cancer occurred 15-20 years after radium treatment. No increase in thyroid cancer risk was observed, a result possibly attributable to the low radiation doses to this organ, and the relatively small population irradiated

  12. Determination of radium-226 in fresh water, using alpha spectroscopy

    International Nuclear Information System (INIS)

    Byrakdar, M. E.

    2006-12-01

    Four radium isotopes are present in nature, i.e. Ra-223, Ra-224, Ra-226, and Ra-228. The first three are alpha emitters while the last is a beta emitter. Because of the importance of the determination of Alpha isotope emitters in pure water (drinking water), this work focuses on the determination of radium-226 as it has the longest half-life (1600 years, in comparison to 11.4 day, 3.66 days for Ra-223 and Ra-224, respectively) using Alpha spectroscopy. This method has the capability to be applied in sampling fields and low detection limit which in turn makes the analysis of low-level radioactive environmental water samples, with hardness does not exceed 40 French Degree, satisfying for health and environment control programmes. However, counting the samples using Alpha spectroscopy has to be immediate (or within 48 hours). (author)

  13. Radium-226 in waters of the Amazon river

    International Nuclear Information System (INIS)

    Shirshova, M.P.; Vinogradova, A.S.; Popov, N.I.

    1987-01-01

    Analysis of the Amazon river waters for 226 Ra content is carried out. Exploration works are carried out in the framework of the soviet investigations of the Amazon river in 1983 by the Academy of Science of USSR on board a research ship ''Professor Schtokman'' with the agreement and participation of brazilian scientists. Radium determination has been carried out in reference with equilibrium radon preliminary accumulated in samples (30 y) tightly closed. The general 226 Ra concentrations observed in the Amazon waters exceed 4-6 times the values known before relating to a ''diluted'' element fraction. It happens due to the presence of the river suspended matter in the water analysed; it is a carrier of additional quantities of 226 Ra, and considerable. The mixture zone of river and ocean waters is shown to be no ''geochemical barrier'' on the way to the ocean for river radium inlike the other microelements of the river run-off

  14. Physicians, reformers and occupational disease: the discovery of radium poisoning

    International Nuclear Information System (INIS)

    Clark, C.

    1987-01-01

    Teenage girls and young women, whose job it was to apply luminous paint containing radium to watches during World War I, were among the first industrial radiation poisoning victims in the United States. This paper recounts both the story of how their afflictions became recognized occupational diseases and of the tangled web of governmental-industrial-academic collusion (largely based on industrial funding of research and experts) which delayed this recognition. It shows how these industrial-academic arrangements led to the establishment of the major academic training programs in occupational medical and industrial hygiene still in existence. Using historical sources, this study provides evidence of moral lapses by medical researchers, including directly lying to the victims, withholding data on the true extent of illness and radiation contamination and of distorting evidence. The pivotal role of the Consumers League and of Dr. Alice Hamilton in establishing the truth of the radium dial painting poisonings is discussed

  15. Dosimetric characterization of two radium sources for retrospective dosimetry studies

    Energy Technology Data Exchange (ETDEWEB)

    Candela-Juan, C., E-mail: ccanjuan@gmail.com [Radiation Oncology Department, La Fe University and Polytechnic Hospital, Valencia 46026, Spain and Department of Atomic, Molecular and Nuclear Physics, University of Valencia, Burjassot 46100 (Spain); Karlsson, M. [Division of Radiological Sciences, Department of Medical and Health Sciences, Linköping University, Linköping SE 581 85 (Sweden); Lundell, M. [Department of Medical Physics and Oncology, Karolinska University Hospital and Karolinska Institute, Stockholm SE 171 76 (Sweden); Ballester, F. [Department of Atomic, Molecular and Nuclear Physics, University of Valencia, Burjassot 46100 (Spain); Tedgren, Å. Carlsson [Division of Radiological Sciences, Department of Medical and Health Sciences, Linköping University, Linköping SE 581 85, Sweden and Swedish Radiation Safety Authority, Stockholm SE 171 16 (Sweden)

    2015-05-15

    Purpose: During the first part of the 20th century, {sup 226}Ra was the most used radionuclide for brachytherapy. Retrospective accurate dosimetry, coupled with patient follow up, is important for advancing knowledge on long-term radiation effects. The purpose of this work was to dosimetrically characterize two {sup 226}Ra sources, commonly used in Sweden during the first half of the 20th century, for retrospective dose–effect studies. Methods: An 8 mg {sup 226}Ra tube and a 10 mg {sup 226}Ra needle, used at Radiumhemmet (Karolinska University Hospital, Stockholm, Sweden), from 1925 to the 1960s, were modeled in two independent Monte Carlo (MC) radiation transport codes: GEANT4 and MCNP5. Absorbed dose and collision kerma around the two sources were obtained, from which the TG-43 parameters were derived for the secular equilibrium state. Furthermore, results from this dosimetric formalism were compared with results from a MC simulation with a superficial mould constituted by five needles inside a glass casing, placed over a water phantom, trying to mimic a typical clinical setup. Calculated absorbed doses using the TG-43 formalism were also compared with previously reported measurements and calculations based on the Sievert integral. Finally, the dose rate at large distances from a {sup 226}Ra point-like-source placed in the center of 1 m radius water sphere was calculated with GEANT4. Results: TG-43 parameters [including g{sub L}(r), F(r, θ), Λ, and s{sub K}] have been uploaded in spreadsheets as additional material, and the fitting parameters of a mathematical curve that provides the dose rate between 10 and 60 cm from the source have been provided. Results from TG-43 formalism are consistent within the treatment volume with those of a MC simulation of a typical clinical scenario. Comparisons with reported measurements made with thermoluminescent dosimeters show differences up to 13% along the transverse axis of the radium needle. It has been estimated that

  16. Radium and radium-daughter nuclides in carbonates: a brief overview of strategies for determining chronologies

    International Nuclear Information System (INIS)

    Schmidt, Sabine; Cochran, J. Kirk

    2010-01-01

    Radium isotopes have been used extensively to trace the movement of groundwater as well as oceanic water masses, but these radionuclides (and their daughters) are also useful chronometers for the determination of the time scales of other Earth and environmental processes. The purpose of this overview is to present the application of Ra and Ra daughters in the dating of carbonates. We show that the choice of dating method (decay of excess radionuclide or ingrowth of daughter) depends strongly on the parent/daughter activity ratios in the water in which the carbonate was precipitated. Thus freshly precipitated carbonates uniformly show excesses of 226 Ra relative to its parent 230 Th, and 226 Ra decay can provide ages of carbonates over Holocene time scales. In contrast, carbonates are precipitated in waters of greatly varying 210 Pb/ 226 Ra. Corals, deep-sea hydrothermal vent clams and the shelled cephalopod Nautilus live in waters with significant dissolved 210 Pb and all show excesses of 210 Pb in their carbonate. Bivalve molluscs from nearshore and coastal waters, and carbonates deposited from groundwater environments (e.g. travertines) in which 210 Pb is efficiently scavenged from solution, show deficiencies of 210 Pb relative to 226 Ra. In contrast, fish otoliths strongly discriminate against 210 Pb regardless of the environment in which the fish lives. Deficiencies of 228 Th relative to 228 Ra are common in all carbonates. Useful time ranges for the 210 Pb/ 226 Ra and 228 Th/ 228 Ra chronometers are ∼100 y and ∼10 y, respectively.

  17. Internal emitter limits for iodine, radium and radon daughters

    Energy Technology Data Exchange (ETDEWEB)

    Schlenker, R.A.

    1984-08-15

    This paper identifies some of the issues which arise in the consideration of the derivation of new limits on exposure to internal emitters. Basic and secondary radiation protection limits are discussed. Terms are defined and applied to the limitation of risk from stochastic effects. Non-stochastic data for specific internal emitters (/sup 131/I and the radium isotopes) are presented. Emphasis is placed on the quantitative aspects of the limit setting problem. 65 references, 2 figures, 12 tables.

  18. Internal emitter limits for iodine, radium and radon daughters

    International Nuclear Information System (INIS)

    Schlenker, R.A.

    1984-01-01

    This paper identifies some of the issues which arise in the consideration of the derivation of new limits on exposure to internal emitters. Basic and secondary radiation protection limits are discussed. Terms are defined and applied to the limitation of risk from stochastic effects. Non-stochastic data for specific internal emitters ( 131 I and the radium isotopes) are presented. Emphasis is placed on the quantitative aspects of the limit setting problem. 65 references, 2 figures, 12 tables

  19. Measurements of radium in water using impregnated fibers

    International Nuclear Information System (INIS)

    Bland, C.J.

    1980-01-01

    The technique perfected by Moore and Reid for sampling radium in seawater is well adapted for environmental sampling. Using this method, we have examined runoff from mine tailings and have observed relatively high amounts of 223 Ra (from the 235 U series). Apparently the fiber is able to absorb a precursor, 231 Pa or 227 Ac, and hence retains the 223 Ra concentrations for long storage periods. Examples of high-resolution alpha spectrometry of these activities are presented

  20. Indoor radon and lung cancer in the radium dial workers

    International Nuclear Information System (INIS)

    Neuberger, J.S.; Rundo, J.

    1996-01-01

    Internally deposited radium has long been known to have tumorigenic effects in the form of sarcomas of the bone and carcinomas of the paranasal sinuses and mastoid air cells. However, the radium dial workers were also exposed to radiation hazards other than that occurring from ingestion of the radium paint, viz., external gamma radiation and elevated concentrations of airborne radon. The uranium miners were also exposed to high concentrations of radon in the 1950s and later, and numerous cases of lung cancer have occurred in that population. However, unlike the atmosphere in the uranium mines, the air in the dial painting plants was probably rather clean and perhaps not much different from the air in many houses. In view of the current concern over the possibility of lung cancer fin the general population being caused by radon (progeny) in houses, it is important to examine the mortality due to this usually fatal disease in the dial workers and to attempt to relate it to their exposure to radon, to the extent that this is possible

  1. Spent sealed radium sources conditioning in Latin America

    International Nuclear Information System (INIS)

    Mourao, R.P.

    1999-01-01

    The management of spent sealed sources is considered by the International Atomic Energy Agency (IAEA) one of the greatest challenges faced by nuclear authorities today, especially in developing countries. One of the Agency's initiatives to tackle this problem is the Spent Radium Sources Conditioning Project, a worldwide project relying on the regional co-operation between countries. A team from the Brazilian nuclear research institute Centro de Desenvolvimento da Tecnologia Nuclear (CDTN) was chosen as the expert team to carry out the operations in Latin America; since December 1996 radium sources have been safely conditioned in Uruguay, Nicaragua, Guatemala, Ecuador and Paraguay. A Quality Assurance Program was established, encompassing the qualification of the capsule welding process, written operational procedures referring to all major steps of the operation, calibration of monitors and information retrievability. A 200L carbon steel drum-based packaging concept was used to condition the sources, its cavity being designed to receive the lead shield device containing stainless steel capsules with the radium sources. As a result of these operations, a total amount of 2,897 mg of needles, tubes, medical applicators, standard sources for calibration, lightning rods, secondary wastes and contaminated objects were stored in proper conditions and are now under control of the nuclear authorities of the visited countries

  2. Spent sealed radium sources conditioning in Latin America

    International Nuclear Information System (INIS)

    Mourao, Rogerio Pimenta

    1999-01-01

    The management of spent sealed sources is considered by the IAEA one of the greatest challenges faced by nuclear authorities today, especially in developing countries. One of the Agency's initiatives to tackle this problem is the 'Spent Radium Sources Conditioning Project', a worldwide project relying on the regional cooperation between countries. A CDTN team was chooses as the expert team to carry out the operations in Latin America; since Dec 96 radium sources have been safely conditioned in Uruguay, Nicaragua, Guatemala and Ecuador. A Quality Assurance Program was established, encompassing the qualification of the capsule welding process, written operational procedures referring to all major steps of the operation, calibration of monitors and information retrievability. A 200L carbon steel drum-based packaging concept was used to condition the sources, its cavity being designed to receive the lead shield device containing stainless steel capsules with the radium sources. As a result of these operations, a total amount of 2,629 mg (approx. 98 GBq) of needles, tubes, medical applicators, standard sources for calibration, lightning rods, secondary wastes (generated during the operations) and contaminated objects were stored in proper conditions and are now under control, of the nuclear authorities of the visited countries. (author)

  3. Distribution of radium and plutonium in human bone

    International Nuclear Information System (INIS)

    Schlenker, R.A.

    1985-01-01

    This review covers studies of the microdistribution of radium and plutonium in human bone, conducted at Argonne with emphasis on the alpha-spectrometric method of measurement. Alpha spectrometry offers high spatial resolution and is well suited to the measurement of radionuclide concentrations near bone surfaces. With these techniques surface deposit thicknesses have been measured to be about 1 μm thick for isotopes of lead, radium and the actinides, and volume deposits of 226 Ra have been found to be quite nonuniform near bone surfaces, leading to endosteal tissue dose rates that are higher than expected under the assumption of uniform volume concentration normally used in radiation protection calculations. With autoradiography, the bony septa of the mastoid air cell system have been found to be depleted in radium relative to the bone tissue surrounding them; this is expected to have a significant influence on the dosimetry of the mastoid epithelia. A combination of autoradiographic and morphometric measurements indicates that specific activities in the axial skeleton are higher than in the appendicular skeleton, primarily because the former has higher bone surface-to-volume ratios and higher bone surface concentrations of plutonium. 19 references, 14 figures, 6 tables

  4. Restoring a neighborhood: Radium cleanup eases fears, rebuilds community

    International Nuclear Information System (INIS)

    Ranney, C.A.; Gaddis, D.M.

    1993-01-01

    Contaminated property is every homeowner's nightmare. That is even more true if the contamination is radioactive. But for the residents of the Monclair, West Orange, and Glen Ridge neighborhoods in Essex County, New Jersey, the nightmare became reality in the early 1980s. These three communities--representing some 750 modest, neatly kept homes--rested on radium-contaminated soils, the result of backfilling and dumping operations from 80 years ago. Residents first became alarmed in 1984, following regulatory action that triggered public awareness of excessive indoor radon gas readings, ambient gamma radiation 150 times normal levels and soil radium concentrations up to 2000 times greater than background. The worst contamination was limited to about 150 of the homes, but community concern--and the threat of the unknown--was tremendous. Not only were soils contaminated, but radon--a gas that forms during the decay of radium--with readings as high as 300 pCi/L in some homes was affecting air quality as well. Because both surficial and deeper soils were found to contain radioactive wastes, runoff and groundwater contamination was feared

  5. Problems in the separation of radium from uranium ore tailings

    Energy Technology Data Exchange (ETDEWEB)

    Seeley, F.G.

    1976-01-01

    The radium content of a representative sandstone type of uranium ore was found to be distributed uniformly according to particle size before leaching, but in sulfuric acid-leached tailings was found predominantly in the -325 mesh fraction. The radium leaching characteristics from both ore and sulfate-leached tailings were investigated. Several 1 M salt solutions showed poor to moderate RaSO/sub 4/ dissolution from ''slimes solids'' tailings, while 3 M HNO/sub 3/ or HCl solutions dissolved approximately 95% of the radium content of either ore or tailings. Tests are reported in which -325 mesh sand particles were coated with alkaline-earth sulfates by a special technique to simulate slime solids tailings. The dissolution of RaSO/sub 4/ from these coated sands was decreased by the presence of BaSO/sub 4/, but increased by the presence of CaSO/sub 4/. The interrelationships in the dissolution of mixtures of CaSO/sub 5/, SrSO/sub 4/, BaSO/sub 4/, and RaSO/sub 4/ are shown, and a generalized equation for the estimation of the dissolution of a minor component is presented.

  6. Wear studies on ZrO2-filled PEEK as coating bearing materials for artificial cervical discs of Ti6Al4V

    International Nuclear Information System (INIS)

    Song, Jian; Liu, Yuhong; Liao, Zhenhua; Wang, Song; Tyagi, Rajnesh; Liu, Weiqiang

    2016-01-01

    Polyetheretherketone (PEEK) and its composite coatings are believed to be the potential candidates' bio-implant materials. However, these coatings have not yet been used on the surface of titanium-based orthopedics and joint products and very few investigations on the tribological characteristics could be found in the published literature till date. In this study, the wettabilities, composition and micro-hardness were characterized using contact angle measurement, scanning electron microscopy (SEM) and hardness tester. The tribological tests were conducted using a ball-on-disc contact pair under 25% newborn calf serum (NCS) lubricated condition. For comparison, bare Ti6Al4V was studied. The obtained results revealed that those PEEK/ZrO 2 composite coatings could improve the tribological properties of Ti6Al4V significantly. Adhesive wear and mild abrasive wear might be the dominant wear and failure mechanisms for PEEK/ZrO 2 composite coatings in NCS lubricated condition. After comprehensive evaluation in the present study, 5 wt.% ZrO 2 nanoparticles filled PEEK coating displayed the optimum tribological characteristics and could be taken as a potential candidate for the bearing material of artificial cervical disc. - Graphical abstract: Polyetheretherketone (PEEK) is a type of biomaterial which might be used in surface modification. In this study, the wettabilities, composition, hardness, friction and wear characteristics of PEEK/ZrO 2 coatings were investigated, compared with bare Ti6Al4V sample. After comprehensive evaluation, 5 wt.% ZrO 2 nanoparticles filled PEEK coating displayed the optimum tribological characteristics and could be taken as a potential candidate for the bearing material of artificial cervical disc. - Highlights: • PEEK coating were filled by ZrO 2 nanoparticles with different weight percentage. • The lubrication regime of all the tested samples are boundary lubrication. • Adhesive wear and mild abrasive wear were the dominant wear

  7. Wear studies on ZrO{sub 2}-filled PEEK as coating bearing materials for artificial cervical discs of Ti6Al4V

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jian [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Liu, Yuhong, E-mail: liuyuhong@tsinghua.edu.cn [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Liao, Zhenhua; Wang, Song [Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Tyagi, Rajnesh [Department of Mechanical Engineering, Indian Institute of Technology (BHU) Varanasi, Varanasi 221005 (India); Liu, Weiqiang, E-mail: weiqliu@hotmail.com [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China)

    2016-12-01

    Polyetheretherketone (PEEK) and its composite coatings are believed to be the potential candidates' bio-implant materials. However, these coatings have not yet been used on the surface of titanium-based orthopedics and joint products and very few investigations on the tribological characteristics could be found in the published literature till date. In this study, the wettabilities, composition and micro-hardness were characterized using contact angle measurement, scanning electron microscopy (SEM) and hardness tester. The tribological tests were conducted using a ball-on-disc contact pair under 25% newborn calf serum (NCS) lubricated condition. For comparison, bare Ti6Al4V was studied. The obtained results revealed that those PEEK/ZrO{sub 2} composite coatings could improve the tribological properties of Ti6Al4V significantly. Adhesive wear and mild abrasive wear might be the dominant wear and failure mechanisms for PEEK/ZrO{sub 2} composite coatings in NCS lubricated condition. After comprehensive evaluation in the present study, 5 wt.% ZrO{sub 2} nanoparticles filled PEEK coating displayed the optimum tribological characteristics and could be taken as a potential candidate for the bearing material of artificial cervical disc. - Graphical abstract: Polyetheretherketone (PEEK) is a type of biomaterial which might be used in surface modification. In this study, the wettabilities, composition, hardness, friction and wear characteristics of PEEK/ZrO{sub 2} coatings were investigated, compared with bare Ti6Al4V sample. After comprehensive evaluation, 5 wt.% ZrO{sub 2} nanoparticles filled PEEK coating displayed the optimum tribological characteristics and could be taken as a potential candidate for the bearing material of artificial cervical disc. - Highlights: • PEEK coating were filled by ZrO{sub 2} nanoparticles with different weight percentage. • The lubrication regime of all the tested samples are boundary lubrication. • Adhesive wear and mild abrasive

  8. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  9. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  10. Assessment of technological solutions for removal of radium discharged to sea from offshore oil and gas installations

    Energy Technology Data Exchange (ETDEWEB)

    Eriksen, Dag Oeistein [Primus.inter.pares AS, Kongsberggata 20, NO-0468 Oslo (Norway); Hylland, Ketil [University of Oslo (Norway); Andersen, Knut Inge [Statoil ASA (Norway); Sidhu, Rajdeep Singh [Institute for Energy Technology - IFE (Norway)

    2014-07-01

    On the Norwegian sector of the North-Sea the oil- and gas-producing fields Troll B and C are the main contributors to radium discharged to the sea (190 GBq/a {sup 226}Ra and 150 GBq/a {sup 228}Ra). Thus, to observe effects caused by the emission of radioactivity and to consider remedial action one should focus on these two installations. Both installations are now operated by Statoil. In a previous comprehensive study of the speciation of discharged radium the conclusion was that it is impossible to detect any effect from radiation doses. The incremental doses due to the emissions were found to be in the nSv-range. The study covered precipitation by sulfate in the sea water, absorption on organic and inorganic materials, uptake in cod eggs and in juvenile cod, effect on sediment living organisms, background levels of pelagic fish and in sediments, and modeling of the distribution in the water column as well the distribution along the coastal stream. Despite the lack of radiation effects, an assessment of possible technological solution for removal of the radium has been undertaken. Such methods must meet the severe requirements imposed by the oil recovery process at Troll B and C: High produced water rates (>1000 m{sup 3}/h), high salinity and content of water soluble carboxylic acids originating from the crude oil, in addition to a relatively high content of barium (3 550 tonnes/a). For implementation on an offshore installation the footprint and weight of the equipment would have to be as low as possible. It is also imperative that the radiation doses to operators are as low as possible. This puts strict requirements on the shielding of the absorbents accumulating {sup 226}Ra and {sup 228}Ra. No commercially available methods were identified, but one new conceptual method based on absorption of radium on barite has been proposed. Barite is also a good shielding material. Tests performed at Institute for Energy Technology show, however, that the kinetics of the

  11. Carbothermic reduction of pyrolusite for obtaining carbon bearing ferromanganese and slags, adequated to the development of welding materials

    International Nuclear Information System (INIS)

    Cruz-Crespo, A.; Garcia-Sanchez, L. L.; Quintana-Puchol, R.; Perdomo Gonzalez, L.; Gomez-Perez, C. R.; Jimenez-Vielsa, G. E.; Cores-Sanchez, A.

    2004-01-01

    The high carbon ferromanganese obtained by means of carbothermic reduction in an electric arc furnace of direct current is proposed. the ideal composition of slag oxides to achieve a flux to be used in the submerged arc welding (SAW) is established. Calculation for charge components (pyrolusite, coke, steel wool, lime, rutile and fluorite) for no fluxes technology for FeMn is carried out taking into account the welding fluxes characteristics of the SiO 2 -MnO-CaO system. Change materials reduction experiments to obtain FeMn and slag are used to develop a SAW flux. (Author) 21 refs

  12. Imaging response during therapy with radium-223 for castration-resistant prostate cancer with bone metastases

    DEFF Research Database (Denmark)

    Keizman, D; Fosboel, M O; Reichegger, H

    2017-01-01

    BACKGROUND: The imaging response to radium-223 therapy is at present poorly described. We aimed to describe the imaging response to radium-223 treatment. METHODS: We retrospectively evaluated the computed tomography (CT) and bone scintigraphy response of metastatic castration-resistant prostate c....../or radiological) may be noted during the first 3 months, and should not be confused with progression. Imaging by CT scan should be considered after three and six doses of radium-223 to rule out extraskeletal disease progression....

  13. Eliminating radium from uranium mill acid effluent with barium chloride-sodium carbonate precipitation

    International Nuclear Information System (INIS)

    Xiao Jiayuan

    1998-01-01

    The eliminating radium procedure, barium chloride-sodium carbonate-sand filtering, being used, radium can be eliminated to 3.7 x 10 -2 Bq/L order of magnitude from uranium mill acid effluents which contain 3.7 Bq/L Ra and pH 6∼9 when Ba 2+ is added by 3∼5 mg per litre, Na 2 CO 3 5mg. The radium elimination rate is more than 90%

  14. Radiochemical determination and separation or total radium, 226Ra and 224Ra

    International Nuclear Information System (INIS)

    Suarez, J. A.; Gonzalez, J. A.; Pablo, M. A. de

    1987-01-01

    Radiochemical purification and separation of radium has been carried out and the determination of total radium solubilized in aqueous samples has been studied assuming that all the alpha emitters of the sample have their origin in the 226Ra and elements of its desintegration chain. Also, the activities of 22Ra and 226 Ra have been evaluated separately doing a measurement after the chemical separation of the radium and another one 10 days after. (Author) 9 refs

  15. Statistical signal processing and artificial intelligence applications in the nondestructive assay of U/Pu bearing materials

    International Nuclear Information System (INIS)

    Aumeier, S.E.; Forsmann, J.H.

    1997-01-01

    Over the years a number of techniques have been developed to determine the quantity and distribution of radiative isotopes contained in given assay samples through the measurement and analysis of penetrating characteristic radiations. An active technique of particular utility when assaying samples containing very small quantities of fissionable material or when high gamma ray backgrounds are encountered is the delayed neutron nondestructive assay (DN-NDA) technique. Typically, analysis of the delayed neutron signal involves relating the gross delayed neutron count observed following neutron irradiation of an assay sample to total fissionable material present via a linear calibration curve. In this way, the technique is capable of yielding the mass of a single dominant fissionable isotope or the total fissionable mass contained in a sample. Using this approach the only way to determine the mass of individual fissionable isotopes contained in a sample is to correlate total fissionable mass to individual isotopics via calculations or other means, yielding an indirect measure of isotopics. However, there is isotope specific information in the temporal delayed neutron signal due to differences in the delayed neutron precursor yields resulting from the fissioning of different isotopes. The authors present the results of an analysis to evaluate the feasibility of using Kalman filters and genetic algorithms to determine multiple specific fissionable isotopic masses contained in an assay sample from a cumulative delayed neutron signal measured following neutron irradiation of the sample

  16. Comparison of techniques for pre-concentrating radium from seawater

    International Nuclear Information System (INIS)

    Bourquin, M.; Van Beek, P.; Souhaut, M.; Jeandel, C.; Reyss, J.L.; Charette, M.A.

    2008-01-01

    In the framework of the KEOPS project (Kerguelen: compared study of the Ocean and the Plateau in Surface water), we aimed to provide information on the water mass pathways and vertical mixing on the Kerguelen Plateau, Southern Ocean, based on 228 Ra profiles. Because 228 Ra activities are extremely low in this area (∼ 0.1 dpm/100 kg or ∼ 2.10 -18 g kg -1 ), the filtration of large volumes of seawater was required in order to be able to detect it with minimal uncertainty. This challenging study was an opportunity for us to test and compare methods aimed at removing efficiently radium isotopes from seawater. We used Mn-fiber that retains radium and that allows the measurement of all four radium isotopes ( 226 Ra, 228 Ra, 223 Ra, 224 Ra). First, we used Niskin bottles or the ship's seawater intake to collect large volumes of seawater that were passed onto Mn-fiber in the laboratory. Second, we filled cartridges with Mn-fiber that we placed in tandem on in situ pumps. Finally, we fixed nylon nets filled with Mn-fiber on the frame of in situ pumps to allow the passive filtration of seawater during the pump deployment. Yields of radium fixation on the cartridges filled with Mn-fiber and placed on in situ pumps are ca. 30% when combining the two cartridges. Because large volumes of seawater can be filtered with these pumps, this yields to effective volumes of 177-280 kg (that is, higher than that recovered from fourteen 12-1 Niskin bottles). Finally, the effective volume of seawater that passed through Mn-fiber placed in nylon nets and deployed during 4 h ranged between 125 and 364 kg. Consequently, the two techniques that separate Ra isotopes in situ are good alternatives for pre-concentrating radium from seawater. They can save ship-time by avoiding repeated CTD casts to obtain the large volumes of seawater. This is especially true when in situ pumps are deployed to collect suspended particles. However, both methods only provide 228 Ra/ 226 Ra ratios. The

  17. Accumulation of radium in relation to some chemical analogues in Dicranopteris linearis

    International Nuclear Information System (INIS)

    Chao, J.H.; Chuang, C.Y.

    2011-01-01

    This study elucidates the uptake and accumulation of radium in the field-growing fern Dicranopteris linearis by relating the radium concentration to some potential chemical analogues, including alkaline earth metals, rare earth elements, and some important heavy metals. Time-dependent accumulation of radium and these chemical analogues for D. linearis were described by the 228 Th/ 228 Ra activity ratio, an index for inferring plant age. The correlation between radium and these elements was assessed by statistical analysis and used as a reference to elucidate the uptake and accumulation of radium in relation to the chemical analogues. Analytical and statistical results showed that the concentrations of alkaline earth metals (except for Mg) rare earth elements and some heavy metals in D. linearis increased linearly with plant age. These elements, exhibiting a similar accumulation pattern to radium and significant correlation coefficients with radium, were considered as the chemical analogues to radium. Additionally, the plant/soil concentration ratios (CRs) for radium and most of these analogues in D. linearis exceeded 1, consistent with the definition of hyper-accumulator plants.

  18. Distribution of radium in oil and gas industry wastes from Malaysia

    International Nuclear Information System (INIS)

    Omar, M.; Ali, H.M.; Abu, M.P.; Kontol, K.M.; Ahmad, Z.; Ahmad, S.H.S.S.; Sulaiman, I.; Hamzah, R.

    2004-01-01

    Radium concentrations in 470 samples of the various types of waste from oil and gas industries were analysed using gamma spectrometers. The results showed that the radium concentration varied within a wide range. The highest mean 226 Ra and 228 Ra concentrations of 114,300 and 130,120 Bq/kg, respectively, were measured in scales. Overall, 75% of the waste, mostly sludge and extraction residue lies within the normal range of radium concentration in soils of Malaysia. However, some platform sludge can have radium concentration up to 560 Bq/kg

  19. Distribution of radium in oil and gas industry wastes from Malaysia.

    Science.gov (United States)

    Omar, M; Ali, H M; Abu, M P; Kontol, K M; Ahmad, Z; Ahmad, S H S S; Sulaiman, I; Hamzah, R

    2004-05-01

    Radium concentrations in 470 samples of the various types of waste from oil and gas industries were analysed using gamma spectrometers. The results showed that the radium concentration varied within a wide range. The highest mean 226Ra and 228Ra concentrations of 114,300 and 130,120 Bq/kg, respectively, were measured in scales. Overall, 75% of the waste, mostly sludge and extraction residue lies within the normal range of radium concentration in soils of Malaysia. However, some platform sludge can have radium concentration up to 560 Bq/kg.

  20. Radium-226 content and emanating power of some timepieces manufactured in the years 1926--1951

    International Nuclear Information System (INIS)

    Keane, A.T.; Huff, D.R.

    Thirty-two radium-dial timepieces manufactured in the years 1926 to 1951 by a company in Connecticut were individually sealed in small steel cans for determination of radium-C ( 214 Bi) activity by γ-ray spectroscopy. Each can was counted within a few hours after sealing and again 5 or 6 days later; from the two observations, radium-C activities at time of sealing (nonemanating radium content) and at equilibrium (total radium content) were calculated. The mean radium-226 content of 22 pocket watches was 348 nCi (range, 159 to 606), and the mean emanating power (1-nonemanating Ra/total Ra) was 0.175 (range, 0.09 to 0.33). The mean radium-226 content of 9 wrist watches was 150 nCi (range, 54 to 449), and the mean emanating power was 0.242 (range, 0.12 to 0.34). The radium-226 content of the one small clock was 633 nCi, and its emanating power was 0.15. The concentration of radon-222 in the air of a sealed room of dimensions 3 x 3 x 3 m would be increased by about 3 pCi/l if a watch containing 400 nCi of radium-226 with an emanating power of 0.2 were left in the room for a few weeks. (U.S.)

  1. Breast cancer in female radium dial workers first employed before 1930

    International Nuclear Information System (INIS)

    Adams, E.E.; Brues, A.M.

    1980-01-01

    Female radium dial workers first employed before 1930 were analyzed for breast cancer mortality and incidence using method and rate tables described by Monson and the Mantel-Haenszel summary chi-square test for significance. Of 1180 located women, 736 were measured to estimate radium intake. This measured group was analyzed for breast cancer mortality and incidence according to four possible risk factors: radium intake dose, duration of employment, age at first exposure, and parity. The measured women showed a significant excess of breast cancer incidence and mortality only among those women with a radium intake of 50 μCi or greater

  2. Processing of spent Ni-MH batteries for the recovery of cobalt, nickel and rare earth elements bearing materials by means of a chemical and electrochemical sequential process

    Science.gov (United States)

    Delvasto, P.; Orta Rodríguez, R.; Blanco, S.

    2016-02-01

    Rechargeable Ni-MH batteries contain strategic metal values which are worth to be recovered. In the present work, a preliminary sequential chemical and electrochemical procedure is proposed, in order to reclaim materials bearing Ni, Co and rare earth elements (REE) from Ni-MH spent batteries. Initially, spent batteries are disassembled to separate the electrode materials (anode and cathode), which are then leached with an aqueous solution of 5w% sulphuric acid. The metal content of this solution is checked by atomic absorption spectrometry techniques. The obtained solution is pH-adjusted (with NaOH), until pH is between 4.0 and 4.3; then, it is heated up to 70°C to precipitate a rare earth elements sulphate (Nd, La, Pr, Ce), as determined by means of x-ray fluorescence techniques. The solids-free solution is then electrolyzed, in order to recover a Ni-Co alloy. The electrolysis conditions were established through a cyclic voltammetry technique.

  3. Bearing structures

    International Nuclear Information System (INIS)

    Lee, A.S.; Preece, G.E.

    1988-01-01

    A hydrostatic bearing for the lower end of the vertical shaft of a sodium pump comprises a support shell encircling the shaft and a bush located between the shell and shaft. Liquid sodium is fed from the pump outlet to the bush/shaft and bush/shell interfaces to provide hydrostatic support. The bush outer surface and the shell inner surface are of complementary part-spherical shape and the bush floats relative to the shaft so that the bush can align itself with the shaft axis. Monitoring of the relative rotational speed of the bush with respect to the shaft (such rotation being induced by the viscous drag forces present) is also performed for the purposes of detecting abnormal operation of the bearing or partial seizure, at least one magnet is rotatable with the bush, and a magnetic sensor provides an output having a frequency related to the speed of the bush. (author)

  4. Journal Bearings

    Directory of Open Access Journals (Sweden)

    Renato Brancati

    1999-01-01

    determined after acquiring and analysing the orbits described by the journal axis for assigned unbalance values in different operating conditions. Analysis of the results shows some particular operating features that were not entirely predicted by the theoretical model and which may give rise to malfunctions in the rotor-tilting pad bearings system. The tests were carried out in the rotor dynamics laboratory of the Dipartimento di Ingegneria Meccanica per l'Energetica at the University of Naples.

  5. Camshaft bearing arrangement

    Energy Technology Data Exchange (ETDEWEB)

    Aoi, K.; Ozawa, T.

    1986-06-10

    A bearing arrangement is described for the camshaft of an internal combustion engine or the like which camshaft is formed along its length in axial order with a first bearing surface, a first cam lobe, a second bearing surface, a second cam lobe, a third bearing surface, a third cam lobe and a fourth bearing surface, the improvement comprising first bearing means extending around substantially the full circumference of the first bearing surface and journaling the first bearing surface, second bearing means extending around substantially less than the circumference of the second bearing surface and journaling the second bearing surface, third bearing means extending around substantially less than the circumference of the third bearing surface and journaling the third bearing surface, and fourth bearing means extending around substantially the full circumference of the fourth bearing surface and journaling the first bearing surface.

  6. Leaching characteristics of encapsulated controlled low-strength materials containing arsenic-bearing waste precipitates from refractory gold bioleaching.

    Science.gov (United States)

    Bouzalakos, S; Dudeney, A W L; Chan, B K C

    2016-07-01

    We report on the leaching of heavy elements from cemented waste flowable fill, known as controlled low-strength materials (CLSM), for potential mine backfill application. Semi-dynamic tank leaching tests were carried out on laboratory-scale monoliths cured for 28 days and tested over 64 days of leaching with pure de-ionised water as leachant. Mineral processing waste include flotation tailings from a Spanish nickel-copper sulphide concentrate, and two bioleach neutralisation precipitates (from processing at 35°C and 70°C) from a South African arsenopyrite concentrate. Encapsulated CLSM formulations were evaluated to assess the reduction in leaching by encapsulating a 'hazardous' CLSM core within a layer of relatively 'inert' CLSM. The effect of each bioleach waste in CLSM core and tailings in CLSM encapsulating medium, are assessed in combination and in addition to CLSM with ordinary silica sand. Results show that replacing silica sand with tailings, both as core and encapsulating matrix, significantly reduced leachability of heavy elements, particularly As (from 0.008-0.190 mg/l to 0.008-0.060 mg/l), Ba (from 0.435-1.540 mg/l to 0.050-0.565 mg/l), and Cr (from 0.006-0.458 mg/l to 0.004-0.229 mg/l), to below the 'Dutch List' of groundwater contamination intervention values. Arsenic leaching was inherently high from both bioleach precipitates but was significantly reduced to below guideline values with encapsulation and replacing silica sand with tailings. Tailings proved to be a valuable encapsulating matrix largely owing to small particle size and lower hydraulic conductivity reducing diffusion transport of heavy elements. Field-scale trials would be necessary to prove this concept of encapsulation in terms of scale and construction practicalities, and further geochemical investigation to optimise leaching performance. Nevertheless, this work substantiates the need for alternative backfill techniques for sustainable management of hazardous finely-sized bulk

  7. 10 CFR 31.12 - General license for certain items and self-luminous products containing radium-226.

    Science.gov (United States)

    2010-01-01

    ... centuries, such as radium emanator jars, revigators, radium water jars, radon generators, refrigerator cards..., U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001 within 30 days. (2) Shall not abandon...

  8. Radium isotopes in the Orinoco estuary and Eastern Caribbean Sea

    International Nuclear Information System (INIS)

    Moore, W.S.; Todd, J.F.

    1993-01-01

    Radium isotopes provide a means of identifying the source of freshened waters in the ocean and determining the time elapsed since these waters were in the estuary. The authors present evidence that during April, waters from the Amazon mixing zone pass within 50 km of the mouth of the Orinoco River. These Amazon waters are characterized by a lower 228 Ra/ 226 Ra activity ratio (AR) than are waters from the Orinoco at similar salinities. During autumn, the increased discharge of the Orinoco displaces the freshened Amazon waters seaward, yet the two can be distinguished clearly. Within the Caribbean Sea, waters of Orinoco origin carry a characteristic radium signature including excess activities of 224 Ra. This isotope may be used to estimate the time elapsed since the waters were removed from contact with sediments. Current speeds based on 224 Ra dating ranged from 15 to 33 cm/s during April. The radium isotopes also provide an assessment of sediment mixing in the estuary. During low discharge (April), considerable mixing of older sediment by physical or biological processes or dredging maintained high activities of 228 Ra in the estuary and produced the highest 228 Ra/ 226 Ra AR's yet measured in any estuary. During high discharge (September), a large fraction of the 228 Ra was derived from desorption from fresh sediment rather than mixing of older sediments. Activities of 224 Ra were high in the estuary during both high and low discharge, indicating that considerable mixing of recently introduced sediment must occur during each period. During April, 224 Ra and 228 Ra activities in the water were about equal, indicating that most of the sediment being resuspended had been stored in the estuary long enough to reestablish radioactive equilibrium in the 232 Th decay series (i.e., 20 years). 19 refs., 11 figs., 3 tabs

  9. A radiation protection initiative to map old radium sources

    International Nuclear Information System (INIS)

    Risica, S.; Grisanti, G.; Masi, R.; Melfi, A.

    2008-01-01

    Due to a legacy of past events, the Technology and Health Department of the Instituto Superiore di Sanita (ISS) has preserved an old, large archive of the allocation of radium sources in public hospitals. These sources were purchased by the Ministry of Interior first, then by the Ministry of Health, and provided to hospitals for cancer brachytherapy. After a retrieval initiative - organised in the 1980's, but discontinued some years later owing to the saturation of the temporary storage site - a considerable number of these sources remained in the hospitals. As a result of an incomplete transfer of the retrieval data, some events connected with the second world war, and the decision of some hospitals to dispose directly of their sources without informing the ISS, the archive was not completed and a series of initiatives were undertaken by the ISS to update it. On the other hand, following the concerns that arose after September 11th, 2001 about the possible criminal use of radioactive sources, the Carabinieri Environmental Care Command (CCTA) were required by the Minister of Environment to carry out a thorough investigation into all possible nuclear sources and waste in the country. Special attention was devoted to radium sources because of the high risk their loss or theft entails. For this reason, in 2004, the CCTA made an agreement with the ISS to acquire a final, updated picture of the distribution of these radium sources. In March 2007 a comprehensive report on this collaborative action and its conclusions was officially sent to both the Ministry of Health and the Ministry of the Environment. The paper describes the involvement of these two bodies in the issue, their collaborative action and the most relevant results. (author)

  10. Dose-response relationships for radium-induced bone sarcomas

    International Nuclear Information System (INIS)

    Rowland, R.E.; Stehney, A.F.; Lucas, H.F. Jr.

    1981-01-01

    The incidence of bone sarcomas among 3055 female radium-dial workers who entered the dial industry before 1950 was used to determine dose-response relationships for the induction of bone sarcomas by radium. Two subpopulations were analyzed: all measured cases who survived at last five years after the start of employment and all cases who survived at least two years after first measurement. The first constituted a group based on year of entry; it contained 1468 women who experienced 42 bone sarcomas; the expected number was 0.4. The second comprised a group based on first measurement; it contained 1257 women who experienced 13 bone sarcomas; the expected number was 0.2. The dose-response function, I = (C + αD + #betta#D 2 )e/sup -#betta#D/, and simplifications of this general form, were fit to each data set. Two functions, I = (C + αD + #betta#D 2 )e/sup -#betta#D/ and I = (C + #betta#D 2 )e/sup -#betta#D/, fit the data for year of entry (p greater than or equal to 0.05); both these functions and I = (C + αD) fit the data for first measurement. The function I = (C + #betta#D 2 )e/sup -#betta#D/ was used to predict the number of bone sarcomas in all other pre-1950 radium cases (medical, laboratory, and other exposure); fewer were actually observed than the fit of this function to the female dial workers predicted

  11. Remedial design process for Montclair/West Orange and Glen Ridge radium sites

    International Nuclear Information System (INIS)

    MacIndoe, M.; Johnson, R.; Paez-Restrepo, A.; Wilkinson, S.; Hyman, M.

    1994-01-01

    The Montclair/West Orange and Glen Ridge Superfund Sites, located in Essex County, New Jersey, are contaminated to varying degrees with radioactive materials. The waste materials originated from radium processing facilities prevalent in the area during the early 1900's. The two sites consist of 769 residential and commercial properties having a combined land area of approximately 210 acres. Historically, radioactive waste materials were disposed as landfill material in what were once rural areas. As development flourished, homes and streets were constructed over the landfilled waste. In 1981 the EPA conducted an aerial gamma radiation survey of the area to determine the presence of radioactive materials. It was from this survey that subsequent ground studies where initiated, and elevated gamma radiation and radon levels were discovered. The paper will discuss the methods used to obtain data through field investigations; the relationship between the interpretation of data to define the vertical and lateral limits of contamination and the selection of remedial design methods used to develop excavation plans; the evolution of remediation methods and technologies relative to the remediation of structures by underpinning basements, on-grade structures, and chimneys; removal of contaminated material beneath footings without cribbing; and demolition of basement foundation walls (where contaminated) without use of traditional support methods. Finally, the paper will discuss remedial action execution of the work

  12. Energy Efficiency Indicators for Assessing Construction Systems Storing Renewable Energy: Application to Phase Change Material-Bearing Façades

    Directory of Open Access Journals (Sweden)

    José A. Tenorio

    2015-08-01

    Full Text Available Assessing the performance or energy efficiency of a single construction element by itself is often a futile exercise. That is not the case, however, when an element is designed, among others, to improve building energy performance by harnessing renewable energy in a process that requires a source of external energy. Harnessing renewable energy is acquiring growing interest in Mediterranean climates as a strategy for reducing the energy consumed by buildings. When such reduction is oriented to lowering demand, the strategy consists in reducing the building’s energy needs with the use of construction elements able to passively absorb, dissipate, or accumulate energy. When reduction is pursued through M&E services, renewable energy enhances building performance. The efficiency of construction systems that use renewable energy but require a supplementary power supply to operate can be assessed by likening these systems to regenerative heat exchangers built into the building. The indicators needed for this purpose are particularly useful for designers, for they can be used to compare the efficiency or performance to deliver an optimal design for each building. This article proposes a series of indicators developed to that end and describes their application to façades bearing phase change materials (PCMs.

  13. Mad on radium New Zealand in the atomic age

    CERN Document Server

    Priestley, Rebecca

    2012-01-01

    Although New Zealander Lord Rutherford was the first to split the atom, the country has since been known around the world for its nuclear-free stance. In this engaging and accessible book, an alternative history is revealed of ""nuclear New Zealand""-when there was much enthusiasm for nuclear science and technology. From the first users of X-rays and radium in medicine to the plans for a nuclear power station on the Kaipara Harbour, this account uncovers the long and rich history of New Zealanders' engagement with the nuclear world and the roots

  14. Simultaneous determination of radium and uranium in soil

    International Nuclear Information System (INIS)

    Yamamoto, Takashi; Yuki, Eiji; Ishida, Tatsuo

    1977-01-01

    Radium and uranium contents in soil are the fundamental indexes for natural radioactivity. In this connection, the simultaneous determination of Ra and U has been studied. To a soil sample, 133 Ba is added and the mixture is dried. It is decomposed with sulfuric and nitric acids. Then a Ba-carrier is added, and the insoluble residue (Ra analysis sample) and the solution (U analysis sample) are obtained for simultaneous determination of Ra and U. The rates of recovery of Ra and U in soil are both over 90%. (Mori, K.)

  15. Radium and barium in the Amazon River system

    International Nuclear Information System (INIS)

    Moore, W.S.; Edmond, J.M.

    1984-01-01

    Data for 226 Ra and 228 Ra in the Amazon River system show that the activity of each radium isotope is strongly correlated with barium concentrations. Two trends are apparent, one for rivers which drain shield areas and another for all other rivers. These data suggest that there has been extensive fractionation of U, Th, and Ba during weathering in the Amazon basin. The 226 Ra data fit a flux model for the major ions indicating that 226 Ra behaves conservatively along the main channel of the Amazon River

  16. Design of semi industrial radium separator by a new bacterium MGF-48

    International Nuclear Information System (INIS)

    Ghafourian, H.; Emami, M.R.; Farazmand, A.

    1998-01-01

    Following of a research work which has been recently published in AEOI scientific Bulletin no. 14, a semi industrial bioreactor has been designed for separation of radium using a new bacterium MGF-48. This bioreactor could be utilized for a high rate separation of radium in semi industrial scale. (author)

  17. Remediation of soil/concrete contaminated with uranium and radium by biological method

    International Nuclear Information System (INIS)

    Gye-Nam Kim; Seung-Su Kim; Hye-Min Park; Won-Suk Kim; Uk-Ryang Park; Jei-Kwon Moon

    2013-01-01

    Biological method was studied for remediation of soil/concrete contaminated with uranium and radium. Optimum experiment conditions for mixing ratios of penatron and soil, and the pH of soil was obtained through several bioremediations with soil contaminated with uranium and radium. It was found that an optimum mixing ratio of penatron for bioremediation of uranium soil was 1 %. Also, the optimum pH condition for bioremediation of soil contaminated with uranium and radium was 7.5. The removal efficiencies of uranium and radium from higher concentration of soil were rather reduced in comparison with those from lower concentration of soil. Meanwhile, the removal of uranium and radium in concrete by bioremediation is possible but the removal rate from concrete was slower than that from soil. The removal efficiencies of uranium and radium from soil under injection of 1 % penatron at pH 7.5 for 120 days were 81.2 and 81.6 %, respectively, and the removal efficiencies of uranium and radium from concrete under the same condition were 63.0 and 45.2 %, respectively. Beyond 30 days, removal rates of uranium and radium from soil and concrete by bioremediation was very slow. (author)

  18. Skeletal and tissue lesions resulting from exposure to radium and fission products

    International Nuclear Information System (INIS)

    Warren, S.

    1973-01-01

    The chief effects of absorbed radionuclides and external radiation are radiation osteitis, disturbed bone growth, myelofibrosis, and bone tumors. The lesions in part are dependent on localization and character of the radiation, in part on dose. Data on radium were derived from dial painters, radium chemists and those treated some years ago by oral or parenteral administration. (U.S.)

  19. Method for analysing radium in powder samples and its application to uranium prospecting

    International Nuclear Information System (INIS)

    Gong Xinxi; Hu Minzhi.

    1987-01-01

    The decayed daughter of Rn released from the power sample (soil) in a sealed bottle were collected on a piece of copper and the radium in the sample can be measured by counting α-particles with an Alphameter for uranium prospection, thus it is called the radium method. This method has many advantages, such as high sensitivity (the lowest limit of detection for radium sample per gram is 2.7 x 10 -15 g), high efficiency, low cost and easy to use. On the basis of measuring more than 700 samples taken along 20 sections in 8 deposits, the results show that the radium method is better than γ-measurement and equal to 210 Po method for the capability to descover anomalies. The author also summarizes the anomaly intensities of radium method, 210 Po method and γ-measurement respectively at the surface with deep blind ores, with or without surficial mineralization, and the figures of their profiles and the variation of Ra/ 210 Po ratios. According to the above-mentioned distinguishing features, the uranium mineralization located in deep and/or shallow parts can be distinguishd. The combined application of radium, 210 Po and γ-measurement methods may be regarded as one of the important methods used for anomaly assessment. Based on the experiments of the radium measurements with 771 stream sediments samples in an area of 100 km 2 , it is demonstrated that the radium mehtod can be used in the stages of uranium reconnaissance and prospecting

  20. Stacked magnet superconducting bearing

    International Nuclear Information System (INIS)

    Rigney, T.K. II; Saville, M.P.

    1993-01-01

    A superconducting bearing is described, comprising: a plurality of permanent magnets magnetized end-to-end and stacked side-by-side in alternating polarity, such that flux lines flow between ends of adjacent magnets; isolating means, disposed between said adjacent magnets, for reducing flux leakage between opposing sides of said adjacent magnets; and a member made of superconducting material having at least one surface in communication with said flux lines

  1. Study of possible economical ways of removing radium from drinking water

    International Nuclear Information System (INIS)

    Valentine, R.L.; Splinter, R.C.; Mulholland, T.S.; Baker, J.M.; Nogaj, T.M.

    1988-01-01

    This study was undertaken to determine variables that control the incidental removal of radium that has been observed to occur as a consequence of treatment to remove iron by oxidation--sand filtration. The study also evaluated the possibility of exploiting these factors to provide an inexpensive means of removing radium using existing or modified iron removal facilities. Studies were also conducted to evaluate radium sorption to hydrous manganese oxides and to evaluate the potential of radium sorption to filter sand as a novel removal technology. Results showed that radium sorption to iron and manganese oxides and filter sand appear to be controlled primarily by the presence of calcium and magnesium, which are believed to compete for sorption sites

  2. Removal of radium from aqueous solutions using adsorbent produced from coconut coir pith

    International Nuclear Information System (INIS)

    Zalina Laili; Muhamat Omar; Mohd Zaidi Ibrahim; Esther Phillip; Mohd Abdul Wahab Yusof; Hassan, A.

    2008-08-01

    A study was conducted to evaluate the potential use of the coconut coir pith as an adsorbent for the removal of radium from aqueous solutions. Experiments to establish adsorptions as a function of pH and contact time were carried out. The results showed that radium adsorption are dependent upon pH and contact time of coconut coir pith with aqueous solutions. 70-80% of radium were adsorbed in the neutral to alkaline pH range. The amount of radium adsorbed also increased with contact time, reaching an optimum after 250 min. Thus, it can be concluded that the coconut coir pith has the potential to be used as an adsorbent in radium removal from aqueous solutions. (Author)

  3. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / development of nano-structured materials for ceramic bearing application (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / ceramic bearing yo nano seigyo zairyo no kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of developing high efficient ceramic bearing using nano-structured materials, technical development was proceeded with of raw material powder treatment, forming sintering, processing, structural analysis, property evaluation, etc. As to the study of manufacturing of ceramic balls, the following were conducted by the method developed at Osaka Prefectural Institute of Industrial Technology: coprecipitation laminate processing of ZrO2-Al2O3 system to alumina powder at Okumura Crucible Mfg. Co. Ltd., spherial press processing and sintering at Kyocera Co. Ltd., and precise machining at Nippon Pillow Block Mfg., Co. Ltd. The performance as bearing was measured of the ceramic balls obtained such as surface coarseness, sphericity, crush strength and fatigue life. Surface coarseness and sphericity were the same as those of bearing use silicon nitride, but crush strength was considerably low. In the experiment on rolling fatigue strength as bearing, separation occurred within 100 hours even at a load of 100kgf. It is thought that this is because of the pores remaining on the surface, and the measures to be taken for long life were studied. 12 refs., 64 figs., 27 tabs.

  4. Determination of radium isotopes by BaSO4 coprecipitation for the preparation of alpha-spectrometric sources

    International Nuclear Information System (INIS)

    Lozano, J.C.; Fernandez, F.; Gomez, J.M.G.

    1997-01-01

    A coprecipitation procedure for the preparation of α-spectrometric sources for radium, using BaSO 4 as carrier, has been applied to the determination of alpha radium isotopes in water samples. The use of 133 Ba as a suitable tracer for radium determination and possible losses of radon isotopes from the sources are studied and discussed. (author)

  5. Hyperspectral surface materials map of quadrangles 3664 and 3764, Char Shengo (123), Shibirghan (124), Jalajin (117), and Kham-Ab (118) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  6. Hyperspectral surface materials map of quadrangles 3666 and 3766, Balkh (219), Mazar-e Sharif (220), Qarqin (213), and Hazara Toghai (214) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  7. Hyperspectral surface materials map of quadrangles 3668 and 3768, Baghlan (221), Taluqan (222), Imam Sahib (215), and Rustaq (216) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  8. Hyperspectral surface materials map of quadrangles 2962 and 3062, Gawdezereh (615), Galachah (616), Chahar Burjak (609), and Khan Neshin (610) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    Hoefen, Todd M.; King, Trude V.V.; Kokaly, Raymond F.; Livo, Keith E.; Giles, Stuart A.; Johnson, Michaela R.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan. Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines. The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  9. Hyperspectral surface materials map of quadrangles 3360 and 3460, Kawir-e Naizar (413), Kohe-Mahmudo-Esmailjan (414), Kol-e Namaksar (407), and Ghoriyan (408) quadrangles, Afghanistan, showing iron-bearing minerals and other materials

    Science.gov (United States)

    King, Trude V.V.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, Keith E.; Johnson, Michaela R.; Giles, Stuart A.

    2013-01-01

    This map shows the spatial distribution of selected iron-bearing minerals and other materials derived from analysis of airborne HyMap™ imaging spectrometer (hyperspectral) data of Afghanistan collected in late 2007. This map is one in a series of U.S. Geological Survey/Afghanistan Geological Survey quadrangle maps covering Afghanistan.Flown at an altitude of 50,000 feet (15,240 meters (m)), the HyMap™ imaging spectrometer measured reflected sunlight in 128 channels, covering wavelengths between 0.4 and 2.5 μm. The data were georeferenced, atmospherically corrected and converted to apparent surface reflectance, empirically adjusted using ground-based reflectance measurements, and combined into a mosaic with 23-m pixel spacing. Variations in water vapor and dust content of the atmosphere, in solar angle, and in surface elevation complicated correction; therefore, some classification differences may be present between adjacent flight lines.The reflectance spectrum of each pixel of HyMap™ imaging spectrometer data was compared to the reference materials in a spectral library of minerals, vegetation, water, and other materials. Minerals occurring abundantly at the surface and those having unique spectral features were easily detected and discriminated, while minerals having slightly different compositions but similar spectral features were less easily discriminated; thus, some map classes consist of several minerals having similar spectra, such as “Goethite and jarosite.” A designation of “Not classified” was assigned to the pixel when there was no match with reference spectra.

  10. Radon in air concentrations arising from storage of articles containing radium or thorium

    International Nuclear Information System (INIS)

    Slater, M.; Gooding, M.

    2006-01-01

    A major component of public and occupational radiation exposure worldwide arises from the inhalation of radon and thoron gases, produced during the decay of naturally occurring uranium and thorium respectively. Whilst radon and thoron exposures are normally associated with the natural environment, there may also be a risk associated with sources, manufactured articles and waste produced through refining and concentration of naturally occurring radioactive material. Sources and articles manufactured from refined uranium do not normally give rise to the release of radon as the uranium progeny are largely removed during production and, if removed, will take thousands of years to reach full equilibrium with the uranium parent isotopes. Exposure to radon -222 ( 222 Rn) may, however, arise in areas where the uranium-238 ( 238 U) daughter radium-226 ( 226 Ra) is concentrated, for example in the form of sources, luminous articles or low-specific activity (LSA) scale. Exposure to radon- 220 ( 220 Rn), otherwise known as thoron, may occur in areas where thorium isotopes are concentrated, for example as manufactured laboratory thorium compounds. This paper explores the issues affecting radon and thoron release from manufactured articles containing uranium and thorium and their progeny. A methodology is provided for the calculation of 222 Rn and 220 Rn in air concentrations likely to arise as a result of the storage and use of articles containing radium-226 ( 226 Ra) or thorium-232 ( 232 Th). The methodology provided in the document allows derivation of the equilibrium equivalent radon concentration and the radon exposure rate in circumstances where the ventilation rate and volume of the facility can be reliably estimated and the quantities of 226 Ra or 232 Th held are known. A critical variable in the calculation is the release fraction (i.e. the proportion of radon generated that is release to atmosphere), and this paper considers methods for estimating this parameter

  11. A new method for the determination of radium-228, thorium-228, and radium-224 in groundwaters via thoron (radon-220)

    International Nuclear Information System (INIS)

    Smith, M.R.; Lautensleger, A.W.; Laul, J.C.

    1988-01-01

    An improved method for determining radium and thorium from the 232 Th decay series has been developed which measures the activity of 220 Rn as an assay of its parents. Although some ingrowth corrections and minor separation procedures for Th are required, the results to date show that the dynamic counting of 220 Rn via de-emanation and alpha counting by the alpha-scintillation method is preferable. The method for lower limit detection depends on the emanation rate. (author) 3 refs.; 6 figs

  12. Effects of radium-226 on bone from a radium dial painter at 12 years and 55 years after ingestion

    International Nuclear Information System (INIS)

    Henning, C.B.; Lloyd, E.L.

    1982-01-01

    Samples of bone from two different sites in a female former radium dial painter, collected 43 years apart, were examined with the electron microscope. The results show further evidence for the presence of a fibrotic layer of tissue covering bone mineral which separates the bone lining cells from the source of the radioactive deposits in bone mineral. This work further confirms our contention that many of the cells at risk for the production of bone tumors probably lie outside the single bone lining cell layer which characteristically lies about 1 to 2 μm away from bone mineral in normal control bone

  13. Evaluation of the Equivalent Radium Activity of Clay Brickworks in Backlands of Paraiba, Brazil

    International Nuclear Information System (INIS)

    Nobrega de Araujo, E. E.; Araujo dos Santos Jr, J.; Andrade de Oliveira, I.; Santos Amaral, R. dos; Dias Bezerra, J.; Jimenez Charfuelan, J. M.; Araujo Costa, M. C.; Marques do Nacimento Santos, J.

    2015-01-01

    The natural radioactivity can reach high levels, depending on the geological formation of each area of the planet. Construction materials contain amounts of natural radioactive elements that may have concentrations upper of established limits, varying according to the composition of rock and soil from which they originated, causing greater exposure to human beings through the use of clay as raw material for ceramics used in construction. The radioecology dosimetry of these materials is defined in terms of the Equivalent Radium activity (Ra Eq ). In this context, this study aimed to establish the calculation of RaEq in the raw material of potteries in the badlands of Paraiba, area adjacent to the uranium deposits of Espinharas, to estimate the risks associated with primordial radionuclides attributed to TENORM activities from the extraction and use of clay in manufacture of bricks and tiles. Analysis were performed by high resolution gamma spectrometry with HPGe detector-Be, assuming the state of secular radioactive equilibrium. The results ranged from 84.49 to 747.78 Nq.kg -1 , with a mean 333.97 Bq.kg -1 . Some samples had values that exceeded the limit of 370 Bq.kg -1 established by UNSCEAR for construction materials, surpassing until on doubled, suggesting greater monitoring and control of these mining areas. (Author)

  14. MEASUREMENT OF RADON EXHALATION RATE, RADIUM ACTIVITY AND ANNUAL EFFECTIVE DOSE FROM BRICKS AND CEMENT SAMPLES COLLECTED FROM DERA ISMAIL KHAN

    OpenAIRE

    Nisar Ahmad; Mohamad Suhaimi Jaafar; Sohail Aziz Khan; Tabassum Nasir; Sajjad Ahmad; Muhammad Rahim

    2014-01-01

    Radon concentration, exhalation rate, radium activity and annual effective dose have been measured from baked and unbaked bricks and cement samples commonly used as construction material in the dwellings of Dera Ismail Khan City, Pakistan. CR-39 based NRPB radon dosimeters and RAD7 have been used as passive and active devises. The values of radon concentration for baked, unbaked bricks and cements obtained from passive and active techniques were found in good agreement. Average values of rado...

  15. The Search for Fundamental Symmetry Violation in Radium Nuclei

    Science.gov (United States)

    Dietrich, Matthew; Bishof, Michael; Bailey, Kevin; Greene, John; Mueller, Peter; O'Connor, Thomas; Lu, Zheng-Tian; Rabga, Tenzin; Ready, Roy; Singh, Jaideep

    2017-09-01

    Electric dipole moments (EDMs) are signatures of time-reversal, parity, and charge-parity (CP) violation, which makes them a sensitive probe of expected new physics beyond the Standard Model. Due to its large nuclear octupole deformation and high atomic mass, the radioactive Ra-225 isotope is a favorable EDM case; it is particularly sensitive to CP-violating interactions in the nuclear medium. We have developed a cold-atom approach of measuring the atomic EDM of atoms held stationary in an optical dipole trap, which we have used to place the only upper limit on the EDM of radium, |d(225Ra)|EDM, but also the first time the EDM of any octupole deformed species has been measured. We will present results on a new approach to spin detection that we expect to improve our EDM sensitivity by a factor of 20. Combined with upcoming improvements to our electric field generation, the next measurement should be competitive with the best neutron EDM result, in terms of sensitivity to CP-violating interactions. The Search for Fudamental Symmetry Violation in Radium Nuclei. This work is supported by the U.S. DOE, Office of Science, Office of Nuclear Physics, under Contract DE-AC02-06CH11357.

  16. The radium contamination in the southern Black Forest

    International Nuclear Information System (INIS)

    Schuttelkopf, H.; Kiefer, H.

    1980-01-01

    The high natural radium contamination in the Southern Black Forest was used to evaluate the extent of contamination in the environment, the mechanisms of radium transport to man, and the radiation burden of the population due to natural Ra-226. Ra-226 was measured in air, soil, sediment and rock samples. Spring, surface and drinking water were examined. The contamination of fish, milk and practically all foodstuffs produced in the Southern Black Forest was measured. Grass and hay samples and many wild plants were also analyzed for Ra-226. Since water and fish samples, grass and milk samples, soil and grass samples were collected jointly in every case, it was possible to calculate the following transfer factors: fish/water, grass/soil, milk/grass, water/sediments, foodstuffs/soil. The latter includes the transfer factors for wheat, barley, oat, eggs, beef and deer, potatoes and vegetables. The natural radiation burden was calculated on the basis of the consumption habits by the average member of the population. Measurement in the body counter of the Ra-226 body burden of 28 persons living in the area under consideration concluded the research program. The radio-ecological and health physics aspects of the results are discussed. (H.K.)

  17. Environmental review of the Radium hill mine site, South Australia

    International Nuclear Information System (INIS)

    Lottermoser, B.G.; Ashley, P.M.

    2005-01-01

    The Radium Hill uranium deposit, in semi-arid eastern South Australia, was discovered in 1906 and mined for radium between 1906 and 1931 and for uranium between 1954 and 1961 (production of 969,300 t of davidite ore averaging 0.12% U 3 O 8 ). Rehabilitation was limited to removal of mine facilities, sealing of underground workings and capping of selected waste repositories. In 2002, gamma-ray data, plus tailings, uncrushed and crushed waste rock, stream sediment, topsoil and vegetation samples were collected to assist in the examination of the current environmental status of the mine site. The preliminary data indicate that capping of tailings storage facilities did not ensure the long-term containment of the low-level radioactive wastes due to the erosion of sides of the impoundments. Moreover, active wind erosion of waste fines from various, physically unstable waste repositories causes increasing radiochemical (up to 0.94 μSv/h) and geochemical (Ce, La, Sc, Th, U, V, Y) impacts on local soils and sediments. However, measured radiation levels of soils and sediments are at or below Australian Radiation Protection Standards (20 mSv/a averaged over five consecutive years). Additional capping and landform design of the crushed waste and tailings repositories are required in order to minimise erosion and impacts on surrounding soils and sediments. (orig.)

  18. Studies of Stable Octupole Deformations in the Radium Region

    CERN Multimedia

    2002-01-01

    The purpose of the present project is to locate and identify states in the atomic nuclei possessing stable pearshaped octupole deformation. Such states, formally related to the structures known in molecular physics, manifest themselves as families of parity doublets in odd nuclei.\\\\ \\\\ The best possibilities for observing stable octupole deformations are offered in the Ra-region. Both theoretical calculations and experimental indications support such expectations. Such indications are the non-observation of two-phonon octupole vibrational states in the ISOLDE studies of the even-even radium nuclei, and the reversed sign of the decoupling factor of the ground state band in |2|2|5Ra observed in the single-neutron transfer reactions. In order to establish the predicted strong E1 and E3-transitions between the parity doublets in odd nuclei with stable octupole deformations it is proposed to study conversion electrons in odd-mass francium radium and radon isotopes following the @b-decay of francium and astatine. \\...

  19. Radium removal processes capital and operating cost estimates

    International Nuclear Information System (INIS)

    Kelly, F.J.

    1979-09-01

    An estimate of the fixed capital and operating costs for two alternative processes for the removal of dissolved Ra-226 from uranium mill effluent in Elliot Lake, Ontario is presented. Process 1 consists of barium-radium coprecipitation followed by coagulation, flocculation and sedimentation. Process 2 consists of barium-radium coprecipitation followed by gravity media filtration, sand filter backwashing and sedimentation. Cost estimates were prepared for 18 different plant configurations designed to treat 1000 and 4000 imperial gallons per minute (ig/m) of effluent, 24 hrs per day, 7 days per week and 365 days per year with several equipment options. The estimated fixed capital costs for plants equipped with gravity filters were less than those equipped with circular clarifiers. The capital costs ranged from $552,000 with a flow rate of 1000 ig/m to $2,578,000 with a flow rate of 4000 ig/m. Estimated annual operating costs, based on a plant life of 10 years, ranged from $298,000 with a flow rate of 1000 ig/m to $1,061,000 with a flow rate of 4000 ig/m

  20. Radionuclides, trace elements, and radium residence in phosphogypsum of Jordan

    Science.gov (United States)

    Zielinski, R.A.; Al-Hwaiti, M. S.; Budahn, J.R.; Ranville, J.F.

    2011-01-01

    Voluminous stockpiles of phosphogypsum (PG) generated during the wet process production of phosphoric acid are stored at many sites around the world and pose problems for their safe storage, disposal, or utilization. A major concern is the elevated concentration of long-lived 226Ra (half-life = 1,600 years) inherited from the processed phosphate rock. Knowledge of the abundance and mode-of-occurrence of radium (Ra) in PG is critical for accurate prediction of Ra leachability and radon (Rn) emanation, and for prediction of radiation-exposure pathways to workers and to the public. The mean (??SD) of 226Ra concentrations in ten samples of Jordan PG is 601 ?? 98 Bq/kg, which falls near the midrange of values reported for PG samples collected worldwide. Jordan PG generally shows no analytically significant enrichment (age of PG. Water-insoluble residues from Jordan PG constitute environmental mobility of radium and the radiation-exposure pathways near PG stockpiles. ?? 2010 US Government.

  1. The radium contamination in the Southern Black Forest

    International Nuclear Information System (INIS)

    Schuettelkopf, H.; Kiefer, H.

    1980-01-01

    The high natural radium contamination prevailing in the Southern Black Forest was used to assess the degree of contamination of the environment, the mechanisms of radium transport to man, as well as the radiation impact on the population from natural Ra-226. The Ra-226 concentration was determined in samples of soil, river and lake water, ground and spring water, drinking water and foodstuffs including potatoes, corn, flour, meat, milk, vegetables, fish, eggs and entrails; these values were compared to a summary of values taken from the literature. Ra-226 concentrations were also determined in the environmental air, grass and hay samples and wild plants. Transfer factors were calculated for fish/water, sediment/water, grass/milk, grass/soil, milk/soil and the individual foodstuffs. The maximum permissible intake per annum for the population living in this region was calculated to be 7.1 nCi/a, assuming that the total demand for foodstuffs is satisfied by local produces; this corresponds to a body burden of 7.4 nCi of Ra-226. Whole-body counting of a sample of the population showed the calculated level of Ra-226 intake to be an overestimate. (UK)

  2. Biological uptake and transfer of radium-226: a review

    International Nuclear Information System (INIS)

    Williams, A.R.

    1982-01-01

    The theoretical basis of the biological uptake of radium is poorly developed. The simple linear concentration factor model has been used almost exclusively and often without any appreciation of its limitations. An analysis of the available data reveals that this model can be adequately validated only for freshwater algae. Deviations from this model are due to non-linearity of uptake response to increased radium concentration in the medium, to the lack of equilibrium being established within the time scale of the food-chain transfer, and to the existence of multiple sources (e.g. food and water) in some of the food-chain compartments. These theoretical weaknesses and the large errors of prediction indicate a need for more rigorous theoretical and experimental work. This need is further supported by the revised dose limits for the long-lived daughter products of uranium recently recommended by the International Commission on Radiological Protection (ICRP). These revised limits suggest that 226 Ra may no longer be a singularly critical nuclide, and thus dose assessment models will have to incorporate more radionuclide transfer terms, for which the errors are additive, and so should be made as low as possible. (author)

  3. Study on Tribological Properties of CoCrMo Alloys against Metals and Ceramics as Bearing Materials for Artificial Cervical Disc

    Science.gov (United States)

    Xiang, Dingding; Song, Jian; Wang, Song; Liao, Zhenhua; Liu, Yuhong; Tyagi, Rajnesh; Liu, Weiqiang

    2018-02-01

    CoCrMo alloys are believed to be a kind of potential material for artificial cervical disc. However, the tribological properties of CoCrMo alloys against different metals and ceramics are not systematically studied. In this study, the tribological behaviors of CoCrMo alloys against metals (316L, Ti6Al4V) and ceramics (Si3N4, ZrO2) were focused under dry friction and 25 wt.% newborn calf serum (NCS)-lubricated conditions using a ball-on-disc apparatus under reciprocating motion. The microstructure, composition and hardness of CoCrMo alloys were characterized using x-ray diffraction, scanning electron microscopy (SEM) and hardness testers, respectively. The contact angles of the CoCrMo alloys with deionized water and 25 wt.% NCS were measured by the OCA contact angle measuring instrument. The maximum wear width, wear depth and wear volume were measured by three-dimensional white light interference. The morphology and the EDX analysis of the wear marks on CoCrMo alloys were examined by SEM to determine the basic mechanism of friction and wear. The dominant wear mechanism in dry friction for CoCrMo alloys against all pairings was severe abrasive wear, accompanied with a lot of material transfer. Under 25 wt.% NCS-lubricated condition, the wear mechanism for CoCrMo alloys against ceramics (Si3N4, ZrO2) was also mainly severe abrasive wear. However, severe abrasive wear and electrochemical corrosion occurred for the CoCrMo-316L pairing under lubrication. Severe abrasive wear, adhesive wear and electrochemical corrosion occurred for the CoCrMo-Ti6Al4V pairing under lubrication. According to the results, the tribological properties of CoCrMo alloys against ceramics were better than those against metals. The CoCrMo-ZrO2 pairing displayed the best tribological behaviors and could be taken as a potential candidate bearing material for artificial cervical disc.

  4. High frequency circular translation pin-on-disk method for accelerated wear testing of ultrahigh molecular weight polyethylene as a bearing material in total hip arthroplasty.

    Science.gov (United States)

    Saikko, Vesa

    2015-01-21

    The temporal change of the direction of sliding relative to the ultrahigh molecular weight polyethylene (UHMWPE) component of prosthetic joints is known to be of crucial importance with respect to wear. One complete revolution of the resultant friction vector is commonly called a wear cycle. It was hypothesized that in order to accelerate the wear test, the cycle frequency may be substantially increased if the circumference of the slide track is reduced in proportion, and still the wear mechanisms remain realistic and no overheating takes place. This requires an additional slow motion mechanism with which the lubrication of the contact is maintained and wear particles are conveyed away from the contact. A three-station, dual motion high frequency circular translation pin-on-disk (HF-CTPOD) device with a relative cycle frequency of 25.3 Hz and an average sliding velocity of 27.4 mm/s was designed. The pins circularly translated at high frequency (1.0 mm per cycle, 24.8 Hz, clockwise), and the disks at low frequency (31.4mm per cycle, 0.5 Hz, counter-clockwise). In a 22 million cycle (10 day) test, the wear rate of conventional gamma-sterilized UHMWPE pins against polished CoCr disks in diluted serum was 1.8 mg per 24 h, which was six times higher than that in the established 1 Hz CTPOD device. The wear mechanisms were similar. Burnishing of the pin was the predominant feature. No overheating took place. With the dual motion HF-CTPOD method, the wear testing of UHMWPE as a bearing material in total hip arthroplasty can be substantially accelerated without concerns of the validity of the wear simulation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Comparative uptake of thorium-230, radium-226, lead-210 and polonium-210 by plants

    Energy Technology Data Exchange (ETDEWEB)

    D' Souza, T J; Mistry, K B

    1970-01-01

    The entry and translocation of /sup 230/thorium, /sup 226/radium, /sup 210/lead, and /sup 210/polonium were examined in nutrient culture experiments. Strontium-89 was included for comparison. Red kidney beans (Phaseolus vulgaris L.) were treated for a period of 15 days. Results indicate that accumulation of /sup 230/thorium, /sup 210/lead and /sup 210/polonium occurs predominantly in roots and only very small amounts of these nuclides are translocated to shoots. Over comparable periods, the accumulation of /sup 226/radium in roots is 2-3 times lower than that of the other nuclides of uranium series. However, the most significant difference between /sup 226/radium and other nuclides is in the extent of their upward transport which for radium is 50-200 times greater. The amount of radium translocated to shoots is comparable to that of strontium. The present evidence of rapid transfer of /sup 226/radium to shoots suggests that among the nuclides examined, /sup 226/radium is likely to make the major contribution to radioactivity in aerial tissues of plants grown under conditions where root absorption is the principal route of entry of the nuclides.

  6. The uptake of uranium and radium from food and water in relation to calcium

    International Nuclear Information System (INIS)

    Wrenn, M.E.

    1988-01-01

    Observed ratios for dietary radium and calcium suggest that at least a 20 to 70 fold discrimination exists against radium uptake in the skeleton relative to calcium. It has been widely shown in many countries around the world that the relative radium to calcium ratio in the human skeleton varies from country to country, but within geographic areas, it appears to be relatively invariant with age. The ratio of radium-226 to calcium in intake, relative to the radium-226 to calcium value in the skeleton, is called the observed ratio, and varies over the world from a value of 0.013 to 0.039, with a mean of 0.024. In 1975, I inferred a mean observed ratio for uranium of 0.057 for the US. These findings suggest that man is in equilibrium with radium-226 with respect to the calcium in food and water. Most of the calcium would be ingested in diet, as would a significant amount, but not necessarily all, of the radium. The role of calcium for intake in water has not been examined

  7. Bone sarcoma induction by radium 224 in C57BL/Do mice

    International Nuclear Information System (INIS)

    Mays, C.W.; Lloyd, R.D.; Taylor, G.N.; Jones, C.W.

    1989-01-01

    Ninety-five C57BL/Do mice received radium 224 in ten weekly intraperitoneal injections. Doses ranged from 0.5 to 11.6 Gy. Twelve mice developed bone sarcoma. The risk coefficient ±SD was 2.8 ± 0.8%/Gy and the toxicity of shortlived radium 224 relative to longlived radium 226 was 5.4 ± 2.0. Concurrently, a single injection of 33 kBq/kg plutonium 239 was given to 47 similar mice which had a bone sarcoma risk coefficient of 8.4 ± 0.8%/Gy and toxicity relative to longlived radium 226 of 16 ± 4. Based on the studies of Mueller et al that established the increase in effectiveness with increased protraction of radium 224 dose, it is possible, if the radium 224 total dose had been spread continually over about 1 year, that the toxicity of the radium 224 might have been similar to that of plutonium 239. (author)

  8. Full-scale radium-removal system for a small community. Research report, 1 October 1985-30 September 1987

    International Nuclear Information System (INIS)

    Lauch, R.P.; Mangelson, K.A.

    1988-08-01

    A radium-removal treatment plant was constructed for the small community of Redhill Forest in the central mountains of Colorado. The plant consists of iron removal using oxidation, filtration, and settling; radium and hardness removal using ion exchange; and radium removal from the waste brine using Dow Chemical Company's Radium Selective Complexer (RSC). The raw water comes from deep wells and has naturally occuring radium and iron concentrations of about 30-40 pC/L and 7-10 mg/L, respectively, and is aerated before entering the main treatment plant to remove radon gas and carbon dioxide. A unique feature of the plant is the process that removes radium from the waste brine. The process removes only radium from the spent ion-exchange regeneration water by permanently complexing the radium on the RSC. The RSC is replaced when exhausted and sent to a final disposal site that is acceptable to state regulatory agencies. The overall plant reduces radium from about 35 pCi/L to less than 4 pCi/L. The RSC system has consistently removed over 99% of the radium from the spent ion exchange regenerant. The average inflow radium concentration to the RSC was about 1180 pCi/L, and the average effluent was about 9 pCi/L

  9. Occurrence of mammary tumors in beagls given radium-226

    International Nuclear Information System (INIS)

    Bruenger, F.W.; Lloyd, R.D.; Miller, S.C.; Taylor, G.N.; Angus, W.; Huth, D.A.

    1994-01-01

    A total of 128 primary mammary tumors (66 of them malignant) occurred in 35 female beagles injected with 226 Ra at eight dose levels ranging from 0.2 to 440 kBq/kg body mass as young adults, while a total of 156 mammary tumors (57 of them malignant) were seen in 46 female control beagles not given any radioactivity. Sixty-three of 65 control dogs and 59 of 61 dogs given 226 Ra survived the minimum age for diagnosis of mammary tumors of 3.75 years. Based on the observed age-dependent tumor incidence rates in the controls and on the corresponding number of dog-years at risk, the total number of observed malignant tumors in the radium group was statistically greater than the number of expected malignant tumors (66 observed vs 34 expected, P < 0.005). There was no such difference for the benign tumors. Cox regression analysis indicated no increased risk for the first tumor occurrence in irradiated dogs. Cox regression analysis of the multivariate risk sets showed no significantly increased risk for the occurrence of benign tumors but a statistically higher risk of 1.66 with a confidence interval of 1.15-2.40 for the occurrence of malignant tumors. The increased risk was dependent on dose, but a dependence on the frequency of previous occurrence of mammary tumors could not be confirmed. Censoring ovariectomized dogs at time of surgery decreased the relative risks slightly but did not alter the significance. Exposure to diagnostic X rays with cumulative exposures below 0.2 Gy had no effect on tumor formation. It is unknown whether the increased risk for malignant mammary tumors was due to some initial deposition of radium in sensitive tissue, a possible irradiation of fatty mammary tissue from transient radon → polonium deposition, or a general effect of the overall radium deposition on the immune system of the dogs that lowered their resistance to formation of mammary tumors. 27 refs., 5 figs., 4 tabs

  10. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in

  11. The determination of radium-226 in the tailings of gold mines and their environment

    International Nuclear Information System (INIS)

    Malan, J.J.

    1981-10-01

    Radium-226, a daughter product in the uranium-238 decay series, is present in ore mined for the production of both gold and uranium. In this way the radium-226 finds its way into the tailings of mines and is therefore present in all the mine sand dumps and slimes dams in the Republic. Although this radium-226 is in a relatively stable and practically insoluble matrix, it is nevertheless possible for it to migrate from such slimes dams or sand dumps under the influence of various mechanisms. In order to make a survey in these mining environments, it was necessary to adapt an existing emanometric method. In this method radium-226 is co-precipitated from 5 dm 3 water samples with barium sulphate. An investigation was carried out on the recoverability of the radium-226 in this way and it was found that the best results were achieved at a pH of 1 with co-precipitation from a homogenous or a simulated homogenous medium. The barium sulphate precipitate was dissolved by a sodium carbonate fusion with the resulting carbonates dissolving in hydrochloric acid. The back-ground reading due to the presence of radium-266 in the reagents used and the radium-226 slightly contaminating the glassware, was determined with blank measurements. This mean background value was used to determine the detection limit. In the survey, samples of water, slimes, sand and sediment were taken in the main gold-mining areas of the RSA. From the results of the survey it appears that radium-226 is definitely present in the abovementioned environments, but that the concentrations are very low. It was, furthermore, evident that, in contrast with the relatively high concentrations measured near the pollution source, the measured quantity of radium-226 decreases rapidly with increasing distance from the source

  12. Producing a problem? Effects of produced water contaminants (PAHs, radium-226, barium and scale inhibitor) on the copepod Calanus finmarchicus

    Energy Technology Data Exchange (ETDEWEB)

    Kiel Jensen, Louise [Norwegian Radiation Protection Authority, Fram Centre, 9296 Tromsoe (Norway); Halvorsen, Elisabeth; Gammelsaeter Hallanger, Ingeborg [UiT The Arctic University of Norway, Department of Arctic and Marine Biology, P.O. box 6050 Langnes, 9037 Tromsoe (Norway); Tollefsen, Knut Erik; Brooks, Steven [Norwegian Institute for Water Research, Gaustadalleen 21, 0349 Oslo (Norway); Hansen, Bjoern Henrik [SINTEF Materials and Chemistry, Marine Environmental Technology, Brattoerkaia 17B, 7010 Trondheim (Norway)

    2014-07-01

    In the Barents Sea region new petroleum fields are discovered yearly and the extraction of petroleum products are expected to increase in the upcoming years. Despite enhanced technology and stricter governmental legislation, establishing the petroleum industry in the Barents Sea will introduce a new source of Naturally Occurring Radioactive Material (NORM) to the area as some discharges of produced water will be allowed. Whether the presence of produced water poses a risk to the Arctic marine life remains to be examined. We examined effects on the copepod species Calanus finmarchicus after exposure to several compounds found in produced water. A mixture of polycyclic aromatic hydrocarbons and alkyl phenols commonly found in produced water was used as a proxy of the organic fraction of the produced water (hereafter termed APW (Artificial Produced Water)). In addition, exposures were done using radium-226 (proxy for NORM), barium (proxy for metals) and a scale inhibitor (SI -4470, M-I SWACO, Schlumberger Norge AS). Short-term screening tests on a range of concentrations of all compounds were run to assess the hatchability of the eggs and early survival of the nauplii. Long-term experiments were carried out with exposure concentrations at realistic levels found in the vicinity of known discharge points. The copepod C. finmarchicus is considered a keystone species in the Barents Sea ecosystem as it represents the major pathway of energy transfer from lower to higher trophic levels. We have examined sub-lethal effects on early life stages and on adult females. The hatchability of the eggs was not affected by concentrations well above realistic environmental levels. However, the instant mortality of the hatched larvae increased with higher concentrations of barium, scale inhibitor and APW, though not with higher radium-226 concentration. When examining the long-term growth of the nauplii, we found that the survival was poor in the APW treatment, and in the barium

  13. A rapid method of radium-226 analysis in water samples using an alpha spectroscopic technique

    International Nuclear Information System (INIS)

    Lim, T.P.

    1981-01-01

    A fast, reliable and accurate method for radium-226 determination in environmental water samples has been devised, using an alpha spectroscopic technique. The correlation between barium-133 and radium-226 in the barium-radium sulphate precipitation mechanism was studied and in the limited experimental recovery range, the coefficient of correlation was r = 0.986. A self-absorption study for various barium carrier concentrations was also undertaken to obtain the least broadening of alpha energy line widths. An optimum value of 0.3 mg barium carrier was obtained for chemical recovery in the range of 85 percent. (auth)

  14. Processes for extracting radium from uranium mill tailings

    International Nuclear Information System (INIS)

    Nirdosh, I.; Baird, M.H.; Muthuswami, S.V.

    1987-01-01

    This patent describes a process for the extraction of radium from uranium mill tailings solids including the steps of contacting the tailings with a liquid leaching agent, leaching the tailings therewith and subsequently separating the leachate liquid and the leached solids. The improvement described here is wherein the leaching agent comprises: (a) a complexing agent in an amount of from 2 to 10 times the stoichiometric amount needed to complex the metal ions to be removed thereby from the tailings; and (b) a reducing agent reducing the hydrolysable ions of the metal ions to be removed to their lower oxidation states, the reduction agent being present in an amount from 2 to 10 times the stoichiometric amount needed for reducing the hydrolysable metals present in the tailings

  15. Radium uptake by recrystallized gypsum: an incorporation study

    International Nuclear Information System (INIS)

    Lestini, Leslie; Beaucaire, Catherine; Vercouter, Thomas; Descostes, Michael

    2013-01-01

    Batch experiments of 226 Ra uptake by recrystallized gypsum CaSO 4 .2H 2 O(s), monitored over 200 days, have shown that the published value for the distribution coefficient of 226 Ra between gypsum and an aqueous phase, 0.03 (Gnanapragasam and Lewis, 1995), is an upper limit. This suggests that this value needs to be confirmed. A solid solution between gypsum and radium sulfate (Ca,Ra)SO 4 .2H 2 O(s) cannot be considered per se, which is not surprising considering gypsum's high solubility product (lg Ks = -4.58) and the ionic radius of VIII Ra (1.48 A), when compared to that of VIII Ca (1.12 A). (authors)

  16. An age dependent model for radium metabolism in man.

    Science.gov (United States)

    Johnson, J R

    1983-01-01

    The model developed by a Task Group of Committee 2 of ICRP to describe Alkaline Earth Metabolism in Adult Man (ICRP Publication 20) has been modified so that recycling is handled explicitly, and retention in mineral bone is represented by second compartments rather than by the product of a power function and an exponential. This model has been extended to include all ages from birth to adult man, and has been coupled with modified "ICRP" lung and G.I. tract models so that activity in organs can be calculated as functions of time during or after exposures. These activities, and age dependent "specific effective energy" factors, are then used to calculate age dependent dose rates, and dose commitments. This presentation describes this work, with emphasis on the model parameters and results obtained for radium.

  17. Radium 226 in waters of the Magela creek, Northern Australia

    International Nuclear Information System (INIS)

    Sauerland, C.; Medley, P.; Martin, P.

    2004-01-01

    The Magela Creek is located in the tropical monsoonal belt of Australia, which is characterised by contrasting wet (December to March) and dry (April to November) seasons. Magela Creek drains a catchment of which about half of the total area lies upstream of the open-cut Ranger uranium mine. The main risk identified for ecosystems surrounding this mine site is from dispersion of mine waste waters during the wet season. Monitoring of biological indicator organisms, water quality (physical and chemical) and radionuclide concentrations in surface water, groundwater and biota is conducted upstream and downstream of the Ranger mine to measure possible environmental impacts of mining. Of special interest is the radionuclide radium-226, as it is predicted to dominate the effective dose to members of the critical group (i.e. the Aboriginal population living downstream of the mining site) resulting from any release of waters from the mine site, in particular through intake of food items such as freshwater mussels and fish. Receiving water standards for radium-226 have been set for the mine on the basis of radiological dose assessments in accordance with the recommendations of the International Commission on Radiological Protection (ICRP 1996). It is proposed in this paper to compare trigger values based on ICRP recommendations with trigger values developed in line with the philosophy of the new Australian Water Quality Guidelines (ANZECC and ARMCANZ 2000). Total Ra-226 activity concentrations were determined in Magela creek both upstream and downstream of the Ranger uranium mine, using alpha spectrometry with a detection limit of about 0.5 mBq/L. According to the new Water Quality Guidelines site-specific trigger values for total Ra-226 activity concentrations were statistically derived from a reference dataset. They are intended to provide an early warning system for the management of a pollutant source for the purpose of environmental protection of downstream ecosystems

  18. Uranium and radium-226 in the environment of the post-uranium mining areas in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Kardas, M.; Suplinska, M.; Ciupek, K. [Central Laboratory for Radiological Protection (Poland)

    2014-07-01

    The work carried out under the project NCBiR - 'Technologies Supporting Development of Safe Nuclear Power Engineering'; Task 3: Meeting the Polish nuclear power engineering's demand for fuel - fundamental aspects. Depending on location, environmental components may have different concentration levels of radionuclides. Main source of uranium and radium in the natural environment is atmospheric precipitation of the material resulting weathering and erosion of older rocks, enhanced due to human activity by fertilizers used in agriculture and fossil fuel combustion. The waste heaps and dumps, especially derived from post-uranium mining and phosphate fertilizer industry are the another source of uranium and radium in the environment. Our studies include post-uranium mining areas (inactive mines and waste dumps) and those adjacent meadows and grassland at the area of the Giant Mountains (Karkonosze Mountains) in the south-west Poland. Samples of soil and mineral material from mine shafts, water samples from ponds, streams and small rivers and vegetation samples (grass, alfalfa, birch leaves) were analyzed. Also, similar samples from agricultural regions of Poland were examined as a reference level. Uranium isotopes were determined by radiochemical method (ion exchange and extraction) and activity measurement using alpha spectrometry. Concentration of {sup 226}Ra was determined radiochemically using emanation method. For the validation of the method, determinations of uranium isotopes and radium-226 in reference samples were performed. Depending on location, the different levels of activity concentration of analyzed radionuclides were detected. Samples from the mine shafts and dumps, both water and soil, were characterized by the activity concentrations of {sup 238}U and {sup 226}Ra even by several orders higher than outside of those areas. The concentrations of the radionuclides in the areas located in further distances from mine and dumps are similar to

  19. Effects of a natural sepiolite bearing material and lime on the immobilization and persistence of cadmium in a contaminated acid agricultural soil.

    Science.gov (United States)

    Cao, Xueying; Hu, Pengjie; Tan, Changyin; Wu, Longhua; Peng, Bo; Christie, Peter; Luo, Yongming

    2018-05-25

    Soil contamination with cadmium (Cd) represents a substantial threat to human health and environmental quality. Long-term effectiveness and persistence of remediation are two important criteria for the evaluation of amendment techniques used to remediate soils polluted with potentially toxic metals. In the current study, we investigated the remediation persistence of a natural sepiolite bearing material (NSBM, containing 15% sepiolite) and ground limestone (equivalent to > 98.0% CaO) on soil pH, Cd bioavailability, and Cd accumulation by pak choi (Brassica chinensis L.) during the growth of four consecutive crops in a Cd-contaminated acid soil with different amounts of NSBM (0, 0.2, 0.5, 1, 2, and 5%). Soil pH levels ranged from 5.21 to 7.76 during the first crop, 4.30 to 7.34 during the second, 4.23 to 7.80 during the third, and 4.33 to 6.98 during the fourth, and increased significantly with increasing the application rate of NSBM. Soil CaCl 2 -Cd and shoot Cd concentrations decreased by 8.11 to 99.2% and 6.58 to 94.5%, respectively, compared with the control throughout the four cropping seasons. A significant negative correlation was found between soil CaCl 2 -Cd and soil pH. Combined use of 0.1% lime and NSBM showed greater effects than NSBM alone, especially, when the application rate of NSBM was ˂ 2%. Moreover, pak choi tissue Cd concentrations in the treatments with NSBM addition alone at ≥ 2% or at ≥ 1% NSBM combined with 0.1% lime met the maximum permissible concentration (MPC) over the four crops, allowed by the Chinese and European regulations. Based on the present study, safe crop production in the test soil is possible at a soil pH > 6.38 and CaCl 2 -Cd soil Cd immobilization by NSBM without or with lime is a potentially feasible method of controlling the transfer of soil Cd into the food chain.

  20. Resolution of lead-210 chronologies in lake sediments: problems of mid-core fluctuations in lead-210/radium-226 ratios

    Energy Technology Data Exchange (ETDEWEB)

    Haworth, R. [New England Univ., Armidale, NSW (Australia). Dept. of Geography; Heijnis, H. [Australian Inst. of Nuclear Science and Engineering, Lucas Heights, NSW (Australia)

    1997-12-31

    With a range in excess of 150 years under optimum conditions, lead-210 dating represents a valuable tool for studying recent human impacts on the environment, particularly the effects of European settlement in Australia. It is therefore also useful for establishing the start of the pre-European record in a sediment profile. Despite these advantages, there are some unresolved problems that prevent the full potential of an atmospherically-derived lead-210 profile being extended as far into the past as the activity signal allows. lead 210 has a half-life of 22.26 years, and a capacity to precipitate and be adsorbed by terrestrial material, particularly lake and marine sediments. This out-of-phase (or unsupported) lead-210 thus returns to a specific terrigenous location where it is added to the lead- 210 formed continuously in situ from the local radium-226 (equivalent to supported lead-210). Dating is based on the measurement of the decline of this unsupported lead-210 against the equilibrium ratio of in situ lead-210/radium-226. Paper no. 13; Extended abstract. 2 refs., 1 fig.

  1. Resolution of lead-210 chronologies in lake sediments: problems of mid-core fluctuations in lead-210/radium-226 ratios

    International Nuclear Information System (INIS)

    Haworth, R.

    1997-01-01

    With a range in excess of 150 years under optimum conditions, lead-210 dating represents a valuable tool for studying recent human impacts on the environment, particularly the effects of European settlement in Australia. It is therefore also useful for establishing the start of the pre-European record in a sediment profile. Despite these advantages, there are some unresolved problems that prevent the full potential of an atmospherically-derived lead-210 profile being extended as far into the past as the activity signal allows. lead 210 has a half-life of 22.26 years, and a capacity to precipitate and be adsorbed by terrestrial material, particularly lake and marine sediments. This out-of-phase (or unsupported) lead-210 thus returns to a specific terrigenous location where it is added to the lead- 210 formed continuously in situ from the local radium-226 (equivalent to supported lead-210). Dating is based on the measurement of the decline of this unsupported lead-210 against the equilibrium ratio of in situ lead-210/radium-226

  2. Multiple myeloma, leukemia, and breast cancer among the US radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Lucas, H.F.; Stehney, A.F.

    1984-01-01

    The relationships of radium exposure to mortality from multiple myeloma, leukemia, and breast cancer were studied in three cohorts of female dial workers defined by year of first employment. A three-fold excess risk of multiple myeloma occurred in the pre-1930 cohort; however, analyses of body burdens and durations of employment suggest that external radiation was more likely to have been responsible than was internal radium. Leukemia incidence and mortality have not been elevated overall among the female dial workers, either in the pre-1930 or the post-1930 cohorts, but cases have tended to occur early and in subjects with higher body burdens of radium. Extensive analyses of breast cancer data have uncovered several observations weighing against a causal interpretation of the association between radium body burdens and breast cancer

  3. Breast cancer in female radium dial workers first employed before 1930

    International Nuclear Information System (INIS)

    Adams, E.E.; Brues, A.M.

    1982-01-01

    Female radium dial workers first employed before 1930 were analyzed for breast cancer mortality and incidence using method and rate tables described by Manson and the Mantel-Haenszel summary chi-square test for significance. Of 1180 located women, 736 were measured to estimate radium intake. This measured group was analyzed for breast cancer mortality and incidence according to four possible risk factors: radium intake dose, duration of employment, age at first exposure, and parity. The located women had a mortality ratio of 1.51 (p < 0.05). The measured women showed a significant excess of breast cancer incidence and mortality only among those women with a radium intake of 50 μCi or greater. Although not significant, incidence and mortality ratios were slightly higher for nulliparous women

  4. Uranium and radium in Finnsjoen - an experimental approach for calculation of transfer factors

    International Nuclear Information System (INIS)

    Evans, S.; Bergman, R.

    1981-01-01

    The radiological safety studies for underground disposal of HLW show that the future individual and collective doses to an important extent may originate from groundwater borne radium and uranium which reach the biosphere. Indications that the dispersion rates presently used give rise to overestimations of calculated doses justified an investigation for more realistic turnover rates of radium and uranium than those which now are in use. Within one of the sites selected for testing, the area around lake Finnsjoen, a small number of environmental samples were collected and analyzed with respect to radium and uranium and the new transfer coefficients between soil and lake water were derived. The dose rates obtained with the new transfer factors show a close agreement for radium and a slight increase for uranium compared with earlier calculations. (Auth.)

  5. The fantastic history of radium: when a radioactive element becomes a magic potion; La fantastique histoire du radium: Quand un element radioactif devient potion magique

    Energy Technology Data Exchange (ETDEWEB)

    Cosset, Jean-Marc; Huynh, Renaud

    2011-04-18

    More than a century after its discovery, radium has never lost its symbolic power: the symbol of scientific perseverance with Marie Curie handling quintals of ore to extract this 'fabulous metal', symbol of radiations efficiency against cancer, symbol of eternity and value - like diamond, and many more. The power of such a symbol led some mercantile minds to make radium a panacea capable to cure any illness. Then between the first and the second World war, radium became a society phenomenon: popular book writers held of the magic name to imagine wild stories and the advertisers started to link it to any type of product (beverages, shoe polish, razor blades, cigarettes, cheese, condoms..). This book relates the story of this symbol over more than a century, with its successes, its excesses and sometimes its dramas. (J.S.)

  6. Procedure to remove dissolved nickel and/or radium compounds from water and facility therefor

    International Nuclear Information System (INIS)

    Moravec, J.

    2004-01-01

    Dissolved nickel and/or radium compounds are removed from water on a granular material such as quartz sand, crushed coal or granulated MnO 2 whose surface contains oxides of manganese MnO x . The compounds to be removed are adsorbed into the MnO x layer. Subsequently the adsorbed compounds are desorbed with a reductant, such as sodium sulfite, which is present in a concentration forming a redox potential of -5 to -120 mV, and with a solution of sodium polyphosphate, such as sodium hexametaphosphate (NaPO 3 ) n . Two variants are possible: either MnO x is first acted upon with the reductant and subsequently with the polyphosphate, or a mixed solution of the two agents is used. The excess of the agents is removed with water or with a KMnO 4 solution at 0.001 to 25 g/L. The granular material as well as the agent solutions (after concentration) are reusable. (P.A.)

  7. Development and Evaluation of Titanium Spacesuit Bearings

    Science.gov (United States)

    Rhodes, Richard; Battisti, Brian; Ytuarte, Raymond, Jr.; Schultz, Bradley

    2016-01-01

    The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z-series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z-series space suit architecture allows us to reduce mass by an estimated 23 lbs per suit system compared to the previously used stainless steel bearing race designs, without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race- 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility (WSTF) that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approx. 3 years), design parameters for maximum contact stress need to be identified. To identify these design parameters, bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination and design around a cycle life requirement for an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an

  8. Consideration of age-dependent radium retention in people on the basis of the beagle model

    International Nuclear Information System (INIS)

    Parks, N.J.; Keane, A.T.

    1982-01-01

    Skeletal calcification as a function of age has been estimated for human females on the basis of the beagle model. The interspecies scaling of radium retention characteristics has been described in terms of skeletal calcium addition rates for beagles and humans. radium retention in humans exposed to less than 200 μCi was greatest in individuals who were less than 18 years old when exposed

  9. Uptake of Radium by Grass and Shrubs Grown on Mineral Heaps: A Preliminary Study

    International Nuclear Information System (INIS)

    Laili, Z.; Omar, M.; Yusof, M.A. Wahab; Ibrahim, M.Z.

    2015-01-01

    A preliminary study of the uptake of 226 Ra and 228 Ra by grass and shrubs grown on mineral heaps was carried out. Activity concentrations of 226 Ra and 228 Ra in grass and shrubs were measured using gamma spectrometry. The result showed that grass and shrubs grown on mineral heaps contained elevated levels of radium compared to grass and shrubs grown on normal soils. Thus, these plants might be used for phytoremediation of radium contaminated soil. (author)

  10. Calculations of energy levels and lifetimes of low-lying states of barium and radium

    International Nuclear Information System (INIS)

    Dzuba, V. A.; Ginges, J. S. M.

    2006-01-01

    We use the configuration-interaction method and many-body perturbation theory to perform accurate calculations of energy levels, transition amplitudes, and lifetimes of low-lying states of barium and radium. Calculations for radium are needed for the planning of measurements of parity- and time-invariance-violating effects which are strongly enhanced in this atom. Calculations for barium are used to control the accuracy of the calculations

  11. Nuclear fuel handling grapple carriage with self-lubricating bearing

    International Nuclear Information System (INIS)

    Wade, E.E.

    1978-01-01

    Disclosed is a nuclear fuel handling grapple carriage having a bearing with a lubricant reservoir that is capable of being refilled when the bearing and reservoir are submerged in a lubricant pool. The lubricant reservoir supplies lubricant to the bearing while the bearing allows a small amount of lubricant to leak passed appropriately placed seals creating a positive out flow of lubricant thereby preventing foreign material from entering the bearing

  12. Scaling laws for radial foil bearings

    Science.gov (United States)

    Honavara Prasad, Srikanth

    The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort (time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings of various sizes, NASA developed the "rule of thumb" design guidelines for estimation of journal bearing load capacity. The guidelines are based on extensive experimental data. The goal of the current work is the development of scaling laws for radial foil bearings to establish an analytical "rule of thumb" for bearing clearance and bump stiffness. The use of scale invariant Reynolds equation and experimentally observed NASA "rule of thumb" yield scale factors which can be deduced from first principles. Power-law relationships between: a. Bearing clearance and bearing radius, and b. bump stiffness and bearing radius, are obtained. The clearance and bump stiffness values obtained from scaling laws are used as inputs for Orbit simulation to study various cases. As the clearance of the bearing reaches the dimensions of the material surface roughness, asperity contact breaks the fluid film which results in wear. Similarly, as the rotor diameter increases (requiring larger bearing diameters), the load capacity of the fluid film should increase to prevent dry rubbing. This imposes limits on the size of the rotor diameter and consequently bearing diameter. Therefore, this thesis aims

  13. Geological implications of radium and helium in oil-field brines: observations, inferences and speculations

    International Nuclear Information System (INIS)

    Lerche, I.

    1993-01-01

    The 1600 yr half-life of radium restricts the time and thus the distance over which radium can migrate in sediments. The dominant source of unsupported radium in sandstone reservoir brines must then be close by and is likely in shales adjacent to the oil-field reservoirs. The chemical similarity of calcium and radium can be used to argue for a local shale-source contribution to the calcium in reservoir sands -suggesting the probability of calcite cementation early in the sedimentary sequence. Helium production by radium decay increases with time. Concentrations of helium found in reservoir oil field brines are then used to suggest that: (a) such reservoirs are dominantly closed systems over geological times; (b) neither methane nor helium in the reservoirs have migrated any significant distance; and (c) the mechanism responsible for the observed helium in the brine is a continuous on-going process operative today. Diagenetic studies should then deal with both sands and shales interdependently, the two are not separable. Shales control the transport mechanisms of migration so that the primary migration of hydrocarbons, the result of kerogen catagenesis in shales, should occur sufficiently early in the sedimentary sequence in order to avoid exclusion from the reservoir by calcite cementation in association with radium transport. (author)

  14. Dose-response relationships for female radium dial workers: A new look

    International Nuclear Information System (INIS)

    Rowland, R.E.

    1994-01-01

    The values of initial systemic intake and of skeletal dose for all of the U.S. radium cases have recently been revised. This revision was required following the demonstrations by Rundo and by Keane that humans who were exposed to radium as adults lost radium at a rate that depended on the quantity of radium originally deposited within their bodies. These new values have been used to define new dose-response relationships for both the bone sarcomas and the carcinomas arising in the paranasal sinuses and mastoid air cells induced by internally deposited radium. The population examined was employed in the U.S. dial painting industry prior to 1950 and consisted of 1530 female dial workers for whom radium body burden measurements were available. By the end of 1990, 46 cases of bone sarcomas and 19 cases of head carcinomas had been diagnosed in this cohort. The head carcinoma incidence can be adequately fitted by a simple linear function, as was found in previous analyses. The bone sarcoma cases were previously fitted by a dose-squared-exponential function. With the revised values of systemic intake, the sarcoma results could not be satisfactorily fitted with this expression. When the exponent on D was increased to larger values, excellent fits were obtained

  15. Long term consumption of mineral spring water containing natural radium-226

    International Nuclear Information System (INIS)

    Aulenbach, D.B.; Davis, R.E.

    1976-01-01

    The presence of naturally occurring 226 radium in several of the spring waters of Saratoga Springs, New York has been known for some time. However, recently the recommended maximum acceptable limit for consumption of water containing radium has been lowered to the point that the limits are now lower than the concentration of radium observed in several of the wells. A survey was made of 27 individuals who have consumed water from the Hathorn No. 1 Spring for periods varying from 5-65 years. A calculation was made of the 226 radium body burden from equations provided in the literature. The calcium concentration of the springs was determined in consideration of the still unknown comparative selectivity of the body between radium and calcium. Waters from two of the springs were analzyed for 226 radium using the radon emanation method. No adverse effects of consuming the mineral water were observed in the individuals interviewed nor were there any increased incidences of broken or brittle bones among these individuals

  16. Removal of Radium isotopes from oil co-produced water using Bentonite

    International Nuclear Information System (INIS)

    Al Masri, M.S.; Al Attar, L.; Budeir, Y.; Al Chayah, O.

    2010-01-01

    In view of environmental concern, sorption of radium on natural bentonite mineral (Aleppo, Syria) was investigated using batch-type method. Data were expressed in terms of distribution coefficients. An attempt to increase the selectivity of bentonite for radium was made by preparing M-derivatives. Loss of mineral crystallinity in acidic media and the formation of new phase, such as BaCO 3 , in Ba-derivative were imposed by XRD characterisations. Of the cationic forms, Na-bentonite had shown the highest affinity. Mechanisms of radium uptake were pictured using M-derivatives and simulated radium solutions. The obtained results indicated that surface sorption/surface ion exchange were the predominated processes. The distinct sorption behaviour observed with Ba-form was, possibly, a reflection of radium co-precipitation with barium carbonate. The competing order of macro component, likely present in waste streams, was drawn by studying different concentrations of the corresponding salt media. As an outcome, sodium was the weakest inhibitor. The performance of natural bentonite and the most selective forms, i.e. Ba- and Na-derivatives, to sorb radium from actual oil co-produced waters, collected form Der Ezzor Petroleum Company (DEZPC), was studied. This mirrored the influential effect of waters pH over other comparable parameters. (author)

  17. Radium variability produced by shelf-water transport and mixing in the western Gulf of Mexico

    International Nuclear Information System (INIS)

    Reid, D.F.

    1984-01-01

    226 Ra and 228 Ra exhibit significant temporal and spatial variability in the near-surface western Gulf of Mexico. Concentrations of both isotopes during March 1976 were approx. 22 to 26% greater than those observed during February 1973. It is shown that analytical differences cannot account for this increase. Consideration of radium levels in the western Caribbean Sea indicates that there must be an internal source of radium that has a significant but temporally variable influence on near-surface radium concentrations in the western Gulf. Comparisons of radium, salinity, and temperature data from 1973 and 1976 provide evidence that advective transport and mixing of radium-rich shelf water with the interior water column of the western basin is responsible for the variability. By plotting 228 Ra vs 226 Ra from this region, estimates of the apparent shelf-water component in the upper water column can be made. The results indicate 36% over the northern slope, 10 to 18% in the central western Gulf, and 3 to 7% over Campeche Bank. In addition to explaining observed short-term variations of radium in this region, this information should be useful for environmental impact assessments concerned with industrial discharges on the northern shelf. (author)

  18. Alteration of the retinoblastoma gene locus in radium-exposed individuals

    International Nuclear Information System (INIS)

    Hardwick, J.P.; Schlenker, R.; Huberman, E.

    1991-01-01

    This study was performed to determine if the retinoblastoma suppressor gene was altered in individuals exposed to radium. We analyzed the Rb gene in 30 individuals, 17 of whom were exposed to radium either occupationally or iatrogenically. In the kidney DNA from four of nine radium-exposed individuals, the Rb gene was deleted. Three of these alterations in the Rb gene were internal deletions, which resulted in the absence of Rb mRNA accumulation. These results imply that the Rb gene is susceptible to radium-induced damage and confirm previous showing that radiation preferentially causes genomic deletions. The pronounced alterations in the non-tumorigenic femurs from radium-exposed individuals suggests that in the many years of exposure there was a selection of cells with alterations, presumably because of their growth advantage. Also it implies that deletions of one of the Rb alleles can be one of the events (perhaps an initial one) in the progression of radium-induced sarcomas. 11 refs., 2 figs

  19. Radiobiological Parameters in Human Cancers Attributable to Long-Term Radium Deposition

    Energy Technology Data Exchange (ETDEWEB)

    Finkel, A. J.; Miller, C. E.; Hasterlik, R. J. [Argonne National Laboratory, Argonne, IL (United States); Argonne Cancer Research Hospital, Chicago, IL (United States)

    1969-11-15

    A mixed population of about 300 persons that acquired appreciable body burdens of radium 35 to 50 years ago has been followed by our group for the past 20 years. Radium was acquired by these patients by occupational exposure and from administration orally and intravenously by their physicians. To date, a number of these patients have developed fibrosarcomas and osteogenic sarcomas of skeletal tissues, carcinomas and sarcomas of the mastoids and paranasal sinuses, and serious blood dyscrasias. In many cases, analysis of the exposure history and of contemporary, body burdens has enabled us to reconstruct the patterns of radium retention. From these computations, we have been able to analyse the appearance of neoplasms in terms of: (1) contemporary or terminal radium burdens, (2) estimated maximum (i.e. peak initial) radium burdens, and (3) estimated daily and total amounts of radium entering the blood stream during exposure. The ranges of values of these various indices for groups of patients with and without malignant disease and other disabling conditions may serve to characterize the likelihood of radiation carcinogenesis in these and similar patients. (author)

  20. Changes in plain bearing technology

    CERN Document Server

    Koring, Rolf

    2012-01-01

    A unique fusion of theoretical and practical knowledge, Changes in Plain Bearing Technology, by Rolf Koring, covers a meaningful range of expertise in this field.Drawing from years of experience in design development, materials selection, and their correlation to real-life part failure, this title, co-published by SAE International and expert Verlag (Germany), concentrates on hydrodynamic bearings lined with white metals, also known as Babbits.Written under the assumption that even the most mature body of knowledge can be revisited and improved, Changes in Plain Bearing Technology is a courageous and focused approach to questioning accepted test results and looking at alternative material compounds, and their application suitability.The process, which leads to innovative answers on how the technology is transforming itself to respond to new market requirements, shows how interdisciplinary thinking can recognize new potential in long-established industrial modus operandi.Tackling the highly complex issue of co...

  1. Passive magnetic bearing configurations

    Science.gov (United States)

    Post, Richard F [Walnut Creek, CA

    2011-01-25

    A journal bearing provides vertical and radial stability to a rotor of a passive magnetic bearing system when the rotor is not rotating and when it is rotating. In the passive magnetic bearing system, the rotor has a vertical axis of rotation. Without the journal bearing, the rotor is vertically and radially unstable when stationary, and is vertically stable and radially unstable when rotating.

  2. Environmental considerations on uranium and radium from phosphate fertilizers

    International Nuclear Information System (INIS)

    Cioroianu, T.M.; Bunus, F.; Filip, D.; Filip, Gh.

    2001-01-01

    In the process of fertilizer production from natural phosphates of sedimentary origin, most of the existing radioactivity will be found in the final product. The phosphates exploited for fertilizer production at about 150 mill. tons/year are processed by two chemical methods: sulphuric and nitric acid attack. In the process of sulphuric acid attack of the phosphate rock, phosphoric acid and phosphogypsum are produced. The first product is used for fertilizer production, either as triplesuperphosphate (TSP) or diammonium phosphate (DAP). The phosphogypsum waste is deposited on stacks thus becoming a source of concern. In the case of nitric acid attack, the result is a phosphonitric (PN) solution, which is used to produce a complex fertilizer NPK. Uranium and 226Ra (usually in secular equilibrium) are dissolved and distributed between the intermediary products. Thus the average concentration of 100 mg/kg U in the phosphate rock is dissolved in 90-95 % in phosphoric acid while the 226Ra of initial 1000 / 2000 Bq/kg concentration is completely precipitated together with phosphogypsum. Therefore phosphogypsum waste has 1000-1500 Bq/kg 226Ra. The TSP fertilizer being produced by partial neutralization of phosphoric acid with phosphate rock with 100-150 mg/kg U, while 226Ra is only introduced in the neutralization process i.e. 500-800 Bq/kg. In the case of DAP, the uranium content is 140-170 mg/kg without the present of 226Ra. The complex fertilizer obtained through the process of nitric acid attack will have the whole uranium and radium of the phosphate rock (both are dissolved in nitric acid) with uranium and radium contents of 120-160 mg/kg, 1000-1500 Bq/kg respectively. The radioactivities of fertilizers produced may be a source of concern since both uranium and radium are exceeding the present accepted limits for their disposal in the environment. About 10,000-15,000 tons/yr. of uranium is spread every year on the agricultural lands worldwide by the use of phosphate

  3. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium on energy research in its 3rd year (Development of nano-structured materials for ceramic bearing applications); 1999 nendo ceramic bearing yo nano seigyo zairyo no kenkyu kaihatsu seika hokokusho. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Coprecipitation in a chloride-containing water solution is utilized to deposit zirconia nano-particles on alumina particles for the manufacture of a composite powder and a sintered body. As compared with a conventional CIP (cold isostatic press)-molded compact, a slip-cast compact is improved in flexural strength from 1.1 to 1.36Gpa. A composite powder granulating unit is installed. Although it is known that use of the citric acid as gelatinizer in the coprecipitation process results in a homogenous ZrO{sub 2}-Al{sub 2}O{sub 3} composite powder, yet a method is contrived to achieve high crystallinity without gelatinizer by freezing and drying a chloride-containing water solution in a microgravity field. In the near-net molding of spherical ceramic particles, an error in diameter of not more than 50{mu}m is realized. A mass production technology is established by which an inexpensive general-purpose alumina nano-structured material is die-compacted for the manufacture of low-cost ceramic bearings. A high-speed super-flat spherical surface processing technology is developed. In a 25kg-load fatigue test conducted for a combination of nano-structured ceramic balls and steel flat plates that bear the balls, a 240-hour life is attained. The bearing steel stands comparison with those available on the market. (NEDO)

  4. Evaluation of Temperature and Material Combinations on Several Lubricants for Use in the Geostationary Operational Environmental Satellite (GOES) Mission Filter Wheel Bearings

    Science.gov (United States)

    Jansen, Mark J.; Jones, William R., Jr.; Predmore, Roamer E.

    2001-01-01

    A bearing test apparatus was used to investigate lubricant degradation rates and elastohydrodynamic transition temperatures for several perfluoropolyether (Krytox) formulations, a pentasilahydrocarbon, and a synthetic hydrocarbon (Pennzane 2001 A) in an MPB 1219 bearing, which is used in the geostationary operational environmental satellite (GOES) mission filter wheel assembly. Test conditions were the following: 1000-hr duration, 75 C, 20 lb axial load, vacuum level less than 1 x 10(exp -6) Torr, and a 600-rpm rotational speed. Baseline tests were performed using unformulated Krytox 143AB, the heritage lubricant. Krytox additive formulations showed small reductions in degradation rate. Krytox GPL-105, a higher viscosity version, yielded the least amount of degradation products. Both the silahydrocarbon and Pennzane 2001A showed no signs of lubricant degradation and had ample amounts of free oil at test conclusion.

  5. Development of internal CRD for next generation BWR-endurance and robustness tests of ball-bearing materials in high-pressure and high-temperature water

    International Nuclear Information System (INIS)

    Shoji Goto; Shuichi Ohmori; Michitsugu Mori; Shohei Kawano; Tadashi Narabayashi; Shinichi Ishizato

    2005-01-01

    An internal CRD using a heatproof ceramics insulated coil is under development to be a competitive and higher performance as Next- Generation BWR. In the case of the 1700MWe next generation BWR, adapting the internal CRDs, the reactor pressure vessel is almost equivalent to that of 1356 MWe ABWR. The endurance and robustness tests were examined in order to confirm the durability of the bearing for the internal CRD. The durability of the ball bearing for the internal CRD was performed in the high-pressure and high-temperature reactor water of current BWR conditions. The experimental results confirmed the durability of rotational numbers for the operation length of 60 years. We added the cruds into water to confirm the robustness of the ball bearing. The test results also showed good robustness even in high-density crud conditions, compared with the current BWR. This program is conducted as one of the selected offers for the advertised technical developments of the Institute of Applied Energy founded by METI (Ministry of Economy, Trade and Industry) of Japan. (authors)

  6. Measurement of Wear in Radial Journal Bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Ligterink, D.J.; de Gee, A.W.J.

    1996-01-01

    this article, the measurement of wear in radial journal bearings is discussed, where a distinction is made between stationary and non-stationary contact conditions. Starting with Holm/Archard's wear law, equations are derived for the calculation of the specific wear rate k of the bearing material as

  7. Release of radium and other decay-series isotopes from Florida phosphate rock. Final report

    International Nuclear Information System (INIS)

    Burnett, W.C.; Chin, P.; Deetae, S.; Panik, P.

    1988-01-01

    The purpose of this research was to determine the conditions under which uranium decay-series isotopes are released from phosphate rock into the environment. Particular attention was given to the behavior of radium, radon, and polonium. The emphasis was justified because of several documented cases citing elevated concentrations of these radioelements occurring in Florida ground waters. When it became clear that polonium was occasionally present at exceedingly high concentrations in shallow ground waters, the scope of the project was expanded to include a study of the distribution of Po-210 in the surficial aquifer of west central Florida. Studies of a series of phosphate rock samples representing various degrees of chemical weathering show that almost all uranium-series radionuclides display higher activities in weathered samples compared to fresh material. Most samples display a Pb-210/Ra-226 activity ratio less than secular equilibrium because of Rn-222 leakage. An unexpected result was the deficiency of Po-210, relative to Pb-210 in several samples. This implies that polonium, under certain conditions, may be more mobile than lead. Many wells in central Florida contain high concentrations of Po-210. Characteristics which high-polonium groundwaters have in common include low pH, presence of sulfide, and at least moderately high radon

  8. A Radium-223 microgenerator from cyclotron-produced trace Actinium-227

    International Nuclear Information System (INIS)

    Abou, Diane S.; Pickett, Juile; Mattson, John E.; Thorek, Daniel L.J.

    2017-01-01

    The alpha particle emitter Radium-223 dichloride ("2"2"3RaCl_2) has recently been approved for treatment of late-stage bone metastatic prostate cancer. There is considerable interest in studying this new agent outside of the clinical setting, however the supply of "2"2"3Ra is limited and expensive. We have engineered a "2"2"3Ra microgenerator using traces of "2"2"7Ac previously generated from cyclotron-produced "2"2"5Ac. Radiochemically pure "2"2"3RaCl_2 was made, characterized, evaluated in vivo, and the source was recovered in high yield for regeneration of the microgenerator. - Highlights: • A "2"2"3Ra microgenerator was built using residual "2"2"7Ac from cyclotron-produced "2"2"5Ac. • Following "2"2"5Ac decay, the residual "2"2"7Ac was processed into pure "2"2"3Ra. • "2"2"7Ac and "2"2"7Th were recovered in high yield for a permanent supply of "2"2"3Ra. • Clinically supplied and generator-produced "2"2"3Ra have equivalent in vivo distribution. • Microdose column provides sufficient material for research use.

  9. Study of Behavior and detection of radon in environmental samples by scintillation method. Application for radium

    International Nuclear Information System (INIS)

    ZAFIMANJATO, J.L.R.

    2007-01-01

    Radon is considered as the major source of radiological exposure of natural radiations to the population. On an international scale, it represents about the half of exposures of natural radiation sources (UNSCEAR, 1993) Radon gets into human body with inhaled air and sometimes with drinking water. Then, the objective of this work is to know the radon concentrations in water and in indoor atmosphere, and the risk in order to set up a method of monitoring and to identify high radon level areas. A specific method of detection using liquid scintillation with special emphasis on α/β discrimination, the use of solvent extractive and enrichment of radionuclides have been developed for the determination of both 222 Rn and 226 Ra in water. The method is simple, rapid and sensitive. In a pilot project for a monitoring of drinking water in Madagascar, it was shown that the proposed method was suitable for a large scale monitoring and routine analysis. Considerable concentrations of radon were found in water and air samples from Vinaninkarena. Radon concentrations obtained by in situ and in laboratory measurements have been compared to the results of an international intercomparison campaigns organised by the German Society for Liquid Scintillation Spectrometry in 2011. A theoretical study of the behavior of radon is porous material containing radium is detailed in order to describe its exhalation phenomena. An assessment model of the dose due to ingestion and liberation of radon from water is presented and compared with other models especially to the Crawford Brown's model. [fr

  10. Radium and barium removal through blending hydraulic fracturing fluids with acid mine drainage.

    Science.gov (United States)

    Kondash, Andrew J; Warner, Nathaniel R; Lahav, Ori; Vengosh, Avner

    2014-01-21

    Wastewaters generated during hydraulic fracturing of the Marcellus Shale typically contain high concentrations of salts, naturally occurring radioactive material (NORM), and metals, such as barium, that pose environmental and public health risks upon inadequate treatment and disposal. In addition, fresh water scarcity in dry regions or during periods of drought could limit shale gas development. This paper explores the possibility of using alternative water sources and their impact on NORM levels through blending acid mine drainage (AMD) effluent with recycled hydraulic fracturing flowback fluids (HFFFs). We conducted a series of laboratory experiments in which the chemistry and NORM of different mix proportions of AMD and HFFF were examined after reacting for 48 h. The experimental data combined with geochemical modeling and X-ray diffraction analysis suggest that several ions, including sulfate, iron, barium, strontium, and a large portion of radium (60-100%), precipitated into newly formed solids composed mainly of Sr barite within the first ∼ 10 h of mixing. The results imply that blending AMD and HFFF could be an effective management practice for both remediation of the high NORM in the Marcellus HFFF wastewater and beneficial utilization of AMD that is currently contaminating waterways in northeastern U.S.A.

  11. Packaging and Disposal of a Radium-beryllium Source using Depleted Uranium Polyethylene Composite Shielding

    International Nuclear Information System (INIS)

    Keith Rule; Paul Kalb; Pete Kwaschyn

    2003-01-01

    Two, 111-GBq (3 Curie) radium-beryllium (RaBe) sources were in underground storage at the Brookhaven National Laboratory (BNL) since 1988. These sources originated from the Princeton Plasma Physics Laboratory (PPPL) where they were used to calibrate neutron detection diagnostics. In 1999, PPPL and BNL began a collaborative effort to expand the use of an innovative pilot-scale technology and bring it to full-scale deployment to shield these sources for eventual transport and burial at the Hanford Burial site. The transport/disposal container was constructed of depleted uranium oxide encapsulated in polyethylene to provide suitable shielding for both gamma and neutron radiation. This new material can be produced from recycled waste products (depleted uranium and polyethylene), is inexpensive, and can be disposed with the waste, unlike conventional lead containers, thus reducing exposure time for workers. This paper will provide calculations and information that led to the initial design of the shielding. We will also describe the production-scale processing of the container, cost, schedule, logistics, and many unforeseen challenges that eventually resulted in the successful fabrication and deployment of this shield. We will conclude with a description of the final configuration of the shielding container and shipping package along with recommendations for future shielding designs

  12. Conditioning and storage of spent sealed radium sources

    International Nuclear Information System (INIS)

    Cholerzynski, A.; Tomczak, W.

    2001-01-01

    In Poland sealed radioactive sources (SRS) are extensively used in medicine and in industry. There are mainly Co-60, Cs-137, lr-192 and also historical sources contain in Ra-226. The Radioactive Waste Management Department (ZDUOP) of the Institute of Atomic Energy at Swierk is the only organization licensed for the management, storage and disposal of radioactive waste in Poland. ZDUOP deals with all radioactive waste in the country. Storage and disposal of SRS is one of the most important part of its activity. Every year ZDUOP collects about 1000 spent SRS which total activity is near 600 GBq. Spent Ra-226 sources are a special case and therefore are required suitable procedures. Due to their production according to earlier standards and their undesirable characteristics, leakage of these sources is highly possible and practically observed. For this reason conditioning of radium sources needs strict requirements and quality assurance procedure to guarantee their safe storage for an extended period of time (e.g. 40-70 years). The National Radioactive Waste Repository is superficial type repository and considered as temporary storage site for long-lived waste. A storage facility for spent SRS has been properly prepared and licensed by the regulatory body. This facility consist of several concrete chambers which floor is lined stainless steel. The existing regulatory framework for sealed radioactive sources entered into force with issue of the Atomic Law in 1986

  13. Determination of radium-226 by high-resolution alpha spectrometry

    International Nuclear Information System (INIS)

    Sill, C.W.

    1983-01-01

    Condition were determined under which high resolution and accurate and reliable results can be obtained. Refractory solids are dissolved completely by fusion with KF and Ba-133 tracer. The fluoride cake is then transposed with sulfuric acid to a pyrosulfate fusion. Radium is precipitated with barium by addition of lead perchlorate to a dilute HCl solution of the pyrosulfate cake. The resulting insoluble sulfates are dissolved in an alkaline solution of DTPA and the Ra and Ba sulfates are reprecipitated with acetic acid to produce very small crystals. The precipitate is mounted on 0.1-μm membrane filter and analyzed by alpha spectrometry. Water samples are partially evaporated and treated similarly. Resolution, almost as good as with actinides electrodeposited on polished steel plates, is about 60 keV full-width-half-maximum with 100 μg of barium on a 1-inch filter with a 450 mm 2 detector at 20% counting efficiency. Recovery is about 97%. One solid sample can be prepared for counting in less than 2 hours. Methods are discussed for ensuring reliability of the results. Severe contamination of the surface-barrier detector by polonium-210 and recoil products is discussed

  14. Radium-224, 226 and 228 activity in Brazil nuts

    International Nuclear Information System (INIS)

    Andrello, Avacir Casanova; Appoloni, Carlos Roberto; Martins, Maristela; Pacheco, Ariane Mendonca

    2010-01-01

    Full text: Recently, Brazil nuts have received a special attention because they contain large quantities of omega 6, antioxidant fat and selenium. Omega 6 and antioxidant fat prevent body cells inflammation and selenium combats cellular aging, guaranteeing a long and healthy life. One cashew per day is sufficient to assure the minimum amount of selenium necessary to the body. The aim of this work was to study radium (224, 226 and 228) concentration in Brazil nuts of the Amazon region. Thirty samples of different size (10 small, 10 medium and 10 large) exportation-type Brazil nuts, peeled and dehydrated, from the 2009 harvest, were analysed. Each sample, with 1.8 kg mass, was milled and then incinerated, resulting in 48 grams of ashes, that were placed in a 300 ml cylindrical recipient for gamma-ray spectrometry. Ra-224, Ra-226 and Ra-228 activities were determined using the gamma-rays of 234 keV following Pb-214 decay, 352 keV and 609 keV from Pb-212 and Bi-212, and the 911 keV from Ac-228, respectively. The incinerated samples average activities were 1100 Bq/kg for Ra-224, 4500 Bq/kg for Ra-226 and 3500 Bq/kg for Ra-228, corresponding to activities of 29.3 Bq/kg for Ra-224, 120 Bq/kg for Ra-226 and 93.9 Bq/kg for Ra-228 in raw Brazil nuts. (author)

  15. Haemangiopericytoma - Queensland Radium Institute experience and review of the literature

    International Nuclear Information System (INIS)

    Ahern, V.A.; Roberts, S.J.

    1991-01-01

    The clinical characteristics, management, relapse patterns and survival of 17 patients with haemangiopericytoma treated at the Queensland Radium Institute, Australia from 1962 to 1989 are reported. Twelve patients were referred at the time of first diagnosis and were treated with curative intent. Three patients were treated with palliative intent when referred following initial diagnosis, and the remaining two patients were referred at the time of relapse. Disease was metastatic at presentation in 4 patients. Radiotherapy was used as a component of primary treatment of disease in 11 patients, in both patients referred for management of local relapse of haemangiopericytoma, and for palliation of metastatic disease. One patient received chemotherapy as part of initial treatment. Nine patients have died with survival from first treatment ranging from 3 to 139 months. All 8 surviving patients remain free of disease at 6 to 94 months from first treatment. It is concluded that haemangiopericytoma has an unpredictable clinical course, and may be indolent in some patients thus validating intensive local therapy and that there is no apparent benefit from incorporating chemotherapy in the primary management of haemangiopericytoma, although it may provide worth-while palliation in selected patients. Surgery combined with pre-or post-operative radiotherapy is recommended. 30 refs., 3 tabs

  16. A study of electrochemical precipitation as a possible method of removing radium from uranium industry liquid wastes

    International Nuclear Information System (INIS)

    Paiva, M.I.F. de

    1996-09-01

    the cell). It was shown that the increase of flow through the cell raised the total amount of ion precipitated in the membrane and that the application of the current improves substantially the removal of barium. It has also been demonstrated that loss of sulphate from the membrane is linear with flow. Comparisons made between two types of conventional cell (sealed and unsealed cell) and a continuous cell assembled with 'precipitative membranes on the removal of barium ions, demonstrated that the sealing of the cell does not seem to improve significatively the performance of the cell and that the best performance is achieved with the continuous system. The additional use of commercial cation-exchange membranes have been shown to reduce the loss of material from the membrane but decreased the overall barium removal. The existence of a precipitative step involving the removal of barium ions was clarified through the study of the effect of other ions as a feed. It was shown that using sodium nitrate as a feed, higher sulphate as well as lower strontium outlet concentrations were obtained showing, therefore, absence of a precipitation process. The efficiency of removal for barium ions with membranes' age and utilization was also studied. It exhibited a clear reduction in performance as the membrane ages. The mathematical model linking the Nernst-Plank transport equations and the solubility products of different ions in the membrane was developed for the conventional cell when working to remove barium and radium ions. It underpredicted barium removal at low flows. This implies that the ionic transport was not only driven by the electrical field. The model showed good agreement with experimental data. Some comparisons between three techniques tested to remove radium from real wastes are also made: electrochemical precipitation, reverse osmosis (tested in a parallel european programme) and the classical process using barium chloride. (author)

  17. Radium on soil mineral surfaces: Its mobility under environmental conditions and its role in radon emanation. Final report

    International Nuclear Information System (INIS)

    Turekian, K.K.

    1997-01-01

    The ultimate source of 222 Rn to the atmosphere is, of course, 226 Ra. Tracking the mobility of radium therefore is part of the story of radon flux assessment. The study of radium mobility and radon flux measurements has involved virtually all the reservoirs at the Earth's surface. These include soils, groundwaters, coastal waters and the atmosphere. The attempt to understand the mobility of radium involved the study of almost all the radium isotopes ( 226 Ra, 228 Ra, 224 Ra) and the parent and daughters of these isotopes

  18. Denver Radium Site -- Operable Unit I closeout report for the US Environmental Protection Agency

    International Nuclear Information System (INIS)

    1992-08-01

    The Denver Radium Site consists of properties in the Denver, Colorado, area having radioactive contamination left from radium processing in the early 1900s. The properties are divided into 11 gaps or operable units to facilitate remedial action of the Site. Operable Unit I is an 8-acre block bounded by Quivas Street to the east, Shoshone Street to the west, West 12th Avenue to the south, and West 13th Avenue to the north. The primary focus of interest concerning investigations of radiological contamination was a radium, vanadium, and uranium processing facility at 1201 Quivas Street owned by the Pittsburgh Radium Company (PRC) from 1925 until 1926. The Radium Ores Company, which was associated with PRC, operated the facility until 1927. A Remedial investigation (RI) of Operable Unit I was prepared by Jacobs Engineering Group and CH 2 M Hill on behalf of EPA in April 1986. The draft Feasibility Study (FS), prepared by Jacobs Engineering Group and CH 2 M Hill, was issued in July 1987 (the final FS is the Community Relations Responsiveness Summary with an errata to the draft, issued September 1987). The RI focused on radium uranium processing residues discarded in the early 1900s. These residues contained uranium, radium, and thorium. EPA s Community Relations Plan involved the community in the decision-making process relating to the remedy to be implemented at Operable Unit X, and promoted communications among interested parties throughout the course of the project. The remedial action alternative preferred by EPA for Operable Unit I was Off-Site Permanent Disposal. Because a permanent disposal facility was not available at the time the Record of Decision was issued in September 1987, EPA selected the On-Site Temporary Containment (capping) with the Off-Site Permanent Disposal alternative

  19. Retention of radium from thermal waters on sand filters and adsorbents

    International Nuclear Information System (INIS)

    Elejalde, C.; Herranz, M.; Idoeta, R.; Legarda, F.; Romero, F.; Baeza, A.

    2007-01-01

    This study was focussed on laboratory experiences of retention of radium from one thermal water on sand filters and adsorbents, trying to find an easy method for the elimination in drinkable waters polluted with this natural radio-nuclide. A thermal water from Cantabria (Spain) was selected for this work. Retention experiences were made with columns of 35 mm of diameter containing 15 cm layers of washed river sand or 4 cm layers of zeolite A3, passing known volumes of thermal water at flows between 4 and 40 ml/min with control of the retained radium by determining the amount in the water after the treatment. The statistical analysis of data suggests that retention depends on the flow and the volume passed through the columns. As additional adsorbents were used kaolin and a clay rich in illite. Jar-test experiences were made agitating known weights of adsorbents with the selected thermal water, with addition of flocculants and determination of radium in filtrated water after the treatment. Data suggest that retention is related to the weight of adsorbent used, but important quantities of radium seem remain in solution for higher amounts of adsorbents, according to the statistical treatment of data. The elution of retained radium from columns or adsorbents, previously used in experiences, should be the aim of a future research

  20. Retention of radium from thermal waters on sand filters and adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Elejalde, C. [Dpto. de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria, Alameda de Urquijo s/n, 48013 Bilbao (Spain)]. E-mail: inpelsac@bi.ehu.es; Herranz, M. [Dpto. de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Idoeta, R. [Dpto. de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Legarda, F. [Dpto. de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Romero, F. [Dpto. de Ingenieria Quimica y del Medio Ambiente, Escuela Tecnica Superior de Ingenieria, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Baeza, A. [Dpto. de Fisica, Facultad de Veterinaria, Universidad de Extremadura, Avda. Universidad s/n, 10071 Caceres (Spain)

    2007-06-18

    This study was focussed on laboratory experiences of retention of radium from one thermal water on sand filters and adsorbents, trying to find an easy method for the elimination in drinkable waters polluted with this natural radio-nuclide. A thermal water from Cantabria (Spain) was selected for this work. Retention experiences were made with columns of 35 mm of diameter containing 15 cm layers of washed river sand or 4 cm layers of zeolite A3, passing known volumes of thermal water at flows between 4 and 40 ml/min with control of the retained radium by determining the amount in the water after the treatment. The statistical analysis of data suggests that retention depends on the flow and the volume passed through the columns. As additional adsorbents were used kaolin and a clay rich in illite. Jar-test experiences were made agitating known weights of adsorbents with the selected thermal water, with addition of flocculants and determination of radium in filtrated water after the treatment. Data suggest that retention is related to the weight of adsorbent used, but important quantities of radium seem remain in solution for higher amounts of adsorbents, according to the statistical treatment of data. The elution of retained radium from columns or adsorbents, previously used in experiences, should be the aim of a future research.

  1. Natural radium and radon tracers to quantify water exchange and movement in reservoirs

    Science.gov (United States)

    Smith, Christopher G.; Baskaran, Mark

    2011-01-01

    Radon and radium isotopes are routinely used to quantify exchange rates between different hydrologic reservoirs. Since their recognition as oceanic tracers in the 1960s, both radon and radium have been used to examine processes such as air-sea exchange, deep oceanic mixing, benthic inputs, and many others. Recently, the application of radon-222 and the radium-quartet (223,224,226,228Ra) as coastal tracers has seen a revelation with the growing interest in coastal groundwater dynamics. The enrichment of these isotopes in benthic fluids including groundwater makes both radium and radon ideal tracers of coastal benthic processes (e.g. submarine groundwater discharge). In this chapter we review traditional and recent advances in the application of radon and radium isotopes to understand mixing and exchange between various hydrologic reservoirs, specifically: (1) atmosphere and ocean, (2) deep and shallow oceanic water masses, (3) coastal groundwater/benthic pore waters and surface ocean, and (4) aquifer-lakes. While the isotopes themselves and their distribution in the environment provide qualitative information about the exchange processes, it is mixing/exchange and transport models for these isotopes that provide specific quantitative information about these processes. Brief introductions of these models and mixing parameters are provided for both historical and more recent studies.

  2. Long-term loss of radium in 63 subjects first exposed at ages 6 to 46

    International Nuclear Information System (INIS)

    Keane, A.T.; Schlenker, R.A.

    1986-01-01

    The absorbed dose to bone following the deposition of radium in the skeleton is principally determined by its long-term rate of clearance. In mice, rats, and dogs injected with alkaline-earth radionuclides at various ages between puberty and young adulthood, a negative correlation was observed between the age at injection and the skeletal uptake of the radionuclide and, at short times after injection, a positive correlation was observed between the age at injection and the fraction of the contemporary body content of the radionuclide excreted per unit of time, whereas at long times after injection the fractional clearance rate was found to be largely independent of the age at injection. Age-dependent models of radium retention proposed for man conform to the metabolic observations in animals in their assumption that at long times after intake the fraction of the contemporary body content of radium excreted per unit of time is independent of the age at intake. In this paper, we investigate whether this assumption is supported by the data on the long-term retention of radium in radium-exposed persons

  3. Long-term retention of radium in female former dial workers

    International Nuclear Information System (INIS)

    Rundo, J.; Keane, A.T.; Essling, M.A.

    1984-01-01

    The results of measurements of radium contents in 13 women made over 20 years or more were used to measure radium retention. The women were all employed at different studios of the same Illinois plant as luminous dial workers for up to 4 years. The data for each woman were fitted to an exponential function of time, yielding a biological half-life of approximately 30 to 60 years. There was a strong negative correlation between elimination rate and body content, suggesting an effect of radiation of bone resorption or remodelling. A strong negative correlation was observed between the elimination rate and the reduced x-ray score, a measure of bone damage observed radiographically in the same subjects. Age at first exposure and duration of exposure were not significantly correlated with the elimination rate. The concentration of radium in soft tissues from eight other subjects, expressed as a percentage of the terminal radium content, decreased with increasing body content, providing further evidence that radiation was affecting the elimination rate. An effect of radiation on the late retention of radium has been demonstrated. 10 references, 4 figures, 2 tables

  4. Measurements of radon and radium activity in bottled mineral water

    Energy Technology Data Exchange (ETDEWEB)

    Kappke, Jaqueline; Paschuk, Sergei A.; Correa, Janine N.; Reque, Marilson; Tabuchi, Camila Garcia; Del Claro, Flavia; Perna, Allan Felipe, E-mail: jaquelinekappke@gmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Deniak, Valeriy [Instituto de Pesquisa Pele Pequeno Principe, Curitiba, PR (Brazil)

    2013-07-01

    Current work presents the results of further development of optimized experimental protocol for RAD7 instant radon detector (Durridge Company Inc.) usage in low level radon in water measurements and the results concerning Ra-226 activity evaluation in bottled mineral water samples purchased at Brazilian market. With the purpose to achieve the statistically consistent results for the activity levels of 0.1Bq/L for radon (radium) activity in water, present study used modified experimental protocol which consists of: 1) water samples were stored in hermetically sealed glass vials of 250mL during 30 days to guarantee that Rn-222 will reach the secular equilibrium; 2) the measurements were performed using WAT250 protocol of RAD7 detector; 3) with an aim to decrease the background, the cleaning (activated carbon filter) and drying (DRIERITE desiccant) vessels, which have a function to retain the radioactive decay product of Rn-222 and humidity, were connected to a closed air loop of RAD7 permanently by means of valves and taps, which gave a possibility to repeat all sequence of measurements (including background evaluation) three or four times without to open the air loop and disconnect the sample vial with water. Each water sample was submitted to such measurements two or three times. Obtained results presented the level of Ra-226 activity in studied samples of bottled mineral water that varied from 0.007 ± 0.061 Bq/L to 0.145 ± 0.049 Bq/L, which is below the limit of 0,5 Bq/L established by the World Health Organization (WHO) in 2011 for drinking water. (author)

  5. Measurements of radon and radium activity in bottled mineral water

    International Nuclear Information System (INIS)

    Kappke, Jaqueline; Paschuk, Sergei A.; Correa, Janine N.; Reque, Marilson; Tabuchi, Camila Garcia; Del Claro, Flavia; Perna, Allan Felipe; Deniak, Valeriy

    2013-01-01

    Current work presents the results of further development of optimized experimental protocol for RAD7 instant radon detector (Durridge Company Inc.) usage in low level radon in water measurements and the results concerning Ra-226 activity evaluation in bottled mineral water samples purchased at Brazilian market. With the purpose to achieve the statistically consistent results for the activity levels of 0.1Bq/L for radon (radium) activity in water, present study used modified experimental protocol which consists of: 1) water samples were stored in hermetically sealed glass vials of 250mL during 30 days to guarantee that Rn-222 will reach the secular equilibrium; 2) the measurements were performed using WAT250 protocol of RAD7 detector; 3) with an aim to decrease the background, the cleaning (activated carbon filter) and drying (DRIERITE desiccant) vessels, which have a function to retain the radioactive decay product of Rn-222 and humidity, were connected to a closed air loop of RAD7 permanently by means of valves and taps, which gave a possibility to repeat all sequence of measurements (including background evaluation) three or four times without to open the air loop and disconnect the sample vial with water. Each water sample was submitted to such measurements two or three times. Obtained results presented the level of Ra-226 activity in studied samples of bottled mineral water that varied from 0.007 ± 0.061 Bq/L to 0.145 ± 0.049 Bq/L, which is below the limit of 0,5 Bq/L established by the World Health Organization (WHO) in 2011 for drinking water. (author)

  6. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  7. Some similarities of radium and plutonium toxicity in the beagle and man

    International Nuclear Information System (INIS)

    Taylor, G.N.; Jee, W.S.S.; Mays, C.W.

    1976-01-01

    The value of many toxicity studies, involving various experimental animals, is contingent on how reliably the data can be related to man. An equation has been proposed for extrapolating the Pu syndrome from dog studies to man. It employs the extensive human radium experience and a plutonium-radium toxicity ratio in the dog. The validity of this method is contingent on similar target tissues for both Pu and Ra and approximately equal RBE's for Pu relative to Ra in both man and the dog. Thus, although the radiosensitivity might be significantly different, the endpoints within a given tissue in man and the animal model must necessarily be comparative. The degree of parallelism in the radium-induced syndromes of man and the beagle are examined in order to assess the practicability of estimating Pu risk in man through use of a Pu-Ra toxicity ratio in the beagles

  8. The fantastic history of radium: when a radioactive element becomes a magic potion

    International Nuclear Information System (INIS)

    Cosset, Jean-Marc; Huynh, Renaud

    2011-01-01

    More than a century after its discovery, radium has never lost its symbolic power: the symbol of scientific perseverance with Marie Curie handling quintals of ore to extract this 'fabulous metal', symbol of radiations efficiency against cancer, symbol of eternity and value - like diamond, and many more. The power of such a symbol led some mercantile minds to make radium a panacea capable to cure any illness. Then between the first and the second World war, radium became a society phenomenon: popular book writers held of the magic name to imagine wild stories and the advertisers started to link it to any type of product (beverages, shoe polish, razor blades, cigarettes, cheese, condoms..). This book relates the story of this symbol over more than a century, with its successes, its excesses and sometimes its dramas. (J.S.)

  9. Radiological health risk evaluation of radium contaminated land: A real life implementation

    International Nuclear Information System (INIS)

    Paridaens, J.

    2005-01-01

    A plot of land, currently used for dairy farming, has been contaminated over the years with radium due to the operation of one of the world's largest radium production plants. Within the framework of a global remediation approach for the plant surroundings, the land owner needed advice for a future destination of the land. Therefore, the radium contamination was accurately mapped, and on the basis of its severity a practically feasible subdivision of the land into four plots was proposed. For all four plots, the radiological risk was evaluated for the current type of land use and for possible alternative types. Hence a clear and usable advice could be formulated to the authorities reconciling public health, economic and practical issues. (authors)

  10. Analytical Methodology for the Determination of Radium Isotopes in Environmental Samples

    International Nuclear Information System (INIS)

    2010-01-01

    Reliable, comparable and 'fit for purpose' results are an essential requirement for any decision based on analytical measurements. For the analyst, the availability of tested and validated analytical procedures is an extremely important tool for production of such analytical measurements. For maximum utility, such procedures should be comprehensive, clearly formulated, and readily available to both the analyst and the customer for reference. Since 2004, the environment programme of the IAEA has included activities aimed at the development of a set of procedures for the determination of radionuclides in terrestrial environmental samples. Measurements of radium isotopes are important for radiological and environmental protection, geochemical and geochronological investigations, hydrology, etc. The suite of isotopes creates and stimulates continuing interest in the development of new methods for determination of radium in various media. In this publication, the four most routinely used analytical methods for radium determination in biological and environmental samples, i.e. alpha spectrometry, gamma spectrometry, liquid scintillation spectrometry and mass spectrometry, are reviewed

  11. Method for determination of radium-226 in water by liquid scintillation counting

    International Nuclear Information System (INIS)

    Suomela, J.

    1993-07-01

    The chemical procedure involves the isolation or radium from the sample solution by co-precipitation with lead sulphate. The precipitate is dissolved in alkaline DTPA. The radium isotopes are separated from other radionuclides by co-precipitation with barium sulphate. The barium/radium precipitate is dissolved in alkaline EDTA, the solution is transfered to a liquid scintillation vial and the organic scintillant is added. After sealing, the sample is left until equilibrium between Ra-226 and Rn-222 is established or until a suitable ingrowth time has elapsed. The alpha activity of Rn-222 and its short-lived daughters, Po-218 and Po-214, are measured by the use of a commercial liquid scintillation counter. By using the following procedure and a low level LSC a lover limit of detection of 2 mBq/sample can be achieved

  12. Clinical results in carcinoma of the cervix: radium compared to caesium using remote afterloading

    International Nuclear Information System (INIS)

    Jackson, S.M.; Fairey, R.N.; Kornelsen, R.O.; Young, M.E.J.; Wong, F.L.

    1989-01-01

    In 1979 the Cancer Control Agency of British Columbia changed from radium to remote controlled afterloaded caesium in the treatment of carcinoma of the cervix. In 3 years prior to the change, 139 patients received radium as part of their treatment and in the 3 years after the change, 158 patients received caesium. Overall referral patterns, patient and cancer demographics, and treatment policies were stable throughout the 6-year period. Radiotherapy technique, dose, dose distribution and dose rate were comparable for both radium and caesium treated patients. The results of treatment in the two time periods showed no difference in survival, local tumour control or complications. The use of afterloading has not compromised treatment results and has allowed better nursing care for patients and protection from radiation for all staff. (author)

  13. ''Normal'' tissues from humans exposed to radium contain an alteration in the c-mos locus

    International Nuclear Information System (INIS)

    Huberman, E.; Schlenker, R.A.; Hardwick, J.P.

    1989-01-01

    The structures of a number of human proto-oncogenes from persons with internal systemic exposure to radium were analyzed by restriction enzyme digestion and southern blotting of their DNA. Two extra c-mos Eco R1 restriction-fragment-length bands of 5.0 kb and 5.5 kb were found in tissue DNA from six of seven individuals. The extra c-mos bands were detected in DNA from many, but not all, of the tissues of the individuals exposed to radium. Our results suggest that the c-mos restriction-fragment-length alterations (RFLA) found in individuals exposed to radium were induced rather than inherited, are epigenetic in origin, and most likely result from changes in the methylation of bases surrounding the single exon of the c-mos proto-oncogene. 7 refs., 3 figs., 2 tabs

  14. Human-health effects of radium: an epidemiolgic perspective of research at Argonne National Laboratory

    International Nuclear Information System (INIS)

    Stebbings, J.H.

    1982-01-01

    The topic of health effects of radium has recently been considerably broadened by the identification of multiple myeloma as a specific outcome of bone-seeking radionuclides, and by evidence that the incidence of breast cancer may be significantly increased by radium exposure. All soft-tissue tumors are now suspect, especially leukemias. Concepts of dose-response need to be broadened to include the concept of risk factors, or, if one prefers, of susceptible subgroups. Biological factors relating to radium uptake and retention require study, as do risk factors modifying risk of both the clasical tumors, osteosarcoma and nasal sinus/mastoid, and the more recently suspect soft-tissue tumors. The history, organization, and current research activities in epidemiology at Argonne National Laboratory are described, and findings of the last decade and a half reviewed. Plans for future research are briefly discussed

  15. Human health effects of radium: an epidemiologic perspective of research at Argonne National Laboratory

    International Nuclear Information System (INIS)

    Stebbings, J.H.

    1982-01-01

    The topic of health effects of radium has recently been considerably broadened by the identification of multiple myeloma as a specific outcome of bone-seeking radionuclides, and by evidence that the incidence of breast cancer may be significantly increased by radium exposure. All soft-tissue tumors are now suspect, especially leukemias. Concepts of dose-response need to be broadened to include the concept of risk factors, or, if one prefers, of susceptible subgroups. Biological factors relating to radium uptake and retention require study, as do risk factors modifying risk of both the classical tumors, osteosarcoma and nasal sinus/mastoid, and the more recently suspect soft-tissue tumors. The history, organization, and current research activities in epidemiology at Argonne National Laboratory are described, and findings of the last decade and a half reviewed. Plans for future research are briefly discussed

  16. Uranium and radium content in the soil solutions of the south-western part of Belarus

    International Nuclear Information System (INIS)

    Sokolik, G.A.; Ovsyannikova, S.V.; Vojnikova, E.V.; Popenya, M.V.

    2008-01-01

    The contents of uranium and radium in the pore soil solutions, which are the main chain in the geochemical and biological migration of the chemical elements, has been determined for the first time in Belarus. The control sites have been located outside the zone of Chernobyl fallout radionuclide contamination, that allowed evaluating the current background level of uranium and radium content in the soil solutions. The data on accumulation of the radioactive elements in the pore solutions give the opportunity to estimate the reserve of the radioactive elements in the migratory active forms in the soils. In the majority of soils studied, uranium content in the pore solution is higher than radium content, that points to the higher migratory ability of uranium. The direct correlation between content of fulvic acids' components in the soil solutions and accumulation of uranium in such solutions has been established. (authors)

  17. Uranium, radium and radon exhalation study in some soil samples using track etch technique

    International Nuclear Information System (INIS)

    Harmanjit, Singh; Joga, Singh; Surinder, Singh; Bajwa, B.S.

    2006-01-01

    Full text of publication follows: Uranium, radium concentration and radon exhalation rates have been determined in the soil samples collected from some areas of Punjab using the L.R.-115 nuclear track detectors. Radium concentration in these samples has been found to be varying from 0.80 to 5.34 Bq Kg-1. The radon exhalation rate in these samples has been found to be varying from 0.99 to 6.60 mBq Kg -1 h -1 (32.82 to 218.49 mBqm -2 h -1 ). A good correlation has been observed between radon exhalation rate and radium concentration observed in the soil samples. The uranium concentration in all these samples is being carried out and the other correlations will also be established. (authors)

  18. Myeloid leukaemia/osteosarcoma ratio in CBA/H mice given radium 224

    International Nuclear Information System (INIS)

    Humphreys, E.R.; Stones, V.A.

    1989-01-01

    Four groups of 400 12-week-old CBA/H mice were injected intraperitoneally with mean amounts of 69, 139, 280 and 550 Bq/g -1 radium 224. A further group of 400 mice were injected intraperitoneally with diluting solution only. The mice were allowed unrestricted access to food and water until they died or were killed. To date (September 1988) about 40% of the mice are dead, and 28 cases of myeloid leukaemia and four cases of osteosarcoma have been diagnosed in the animals given radium 224. The relationship between the yield of myeloid leukaemia and the amount of radium 224 injected was found to be curvilinear. The determined value of the myeloid leukaemia:osteosarcoma ratio is discussed. (author)

  19. Interaction of radium with freshwater sediments and their mineral components Pt. 4

    International Nuclear Information System (INIS)

    Benes, P.; Strejc, P.

    1986-01-01

    A radiotracer method was used for investigating the adsorption and desorption of radium on stream sediments under conditions similar to those prevailing in waste and surface waters. The effects of pH, ionic strength and Casup(2+) or SOsub(4)sup(2+) ions were studied. The results were compared with analogous data characterizing radium interaction with model solids representing components of the sediments. It was found that the adsorption affinity of the sediments for radium cannot be easily derived from their composition or other properties. No simple correlation with specific surface area, organic matter, oxidic coatings or other components of the sediments was observed. However, an exceptional role of barite (barium sulfate) in the sediments was noted. (author)

  20. Human-health effects of radium: an epidemiolgic perspective of research at Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Stebbings, J.H.

    1982-01-01

    The topic of health effects of radium has recently been considerably broadened by the identification of multiple myeloma as a specific outcome of bone-seeking radionuclides, and by evidence that the incidence of breast cancer may be significantly increased by radium exposure. All soft-tissue tumors are now suspect, especially leukemias. Concepts of dose-response need to be broadened to include the concept of risk factors, or, if one prefers, of susceptible subgroups. Biological factors relating to radium uptake and retention require study, as do risk factors modifying risk of both the clasical tumors, osteosarcoma and nasal sinus/mastoid, and the more recently suspect soft-tissue tumors. The history, organization, and current research activities in epidemiology at Argonne National Laboratory are described, and findings of the last decade and a half reviewed. Plans for future research are briefly discussed.

  1. Quantitative laws governing the migration of magnesium, calcium, radium-226, thorium-228 in the link between soils and plants

    International Nuclear Information System (INIS)

    Ashkinazi, E.I.

    1982-02-01

    Concentrations of magnesium, calcium, radium 226 and thorium 228 in podsolized chernozem and medium-loamy soils and in agricultural plants (wheat, barley, peas, potatoes, beets, and carrots) were determined. Transition coefficients of magnesium, calcium and radium 226 from soils to plants were calculated

  2. PROVIDING SERVICEABILITY OF STRUCTURAL BEARING TYPES FOR ROADWAY BRIDGES

    Directory of Open Access Journals (Sweden)

    R. I. Polyuga

    2010-03-01

    Full Text Available In the article the description of structural bearing types for roadway bridges and their classification is given. Special attention is paid to effective bearings with elastomeric materials – rubber, pot, spherical ones. Characteristic defects of structural bearings and demands of serviceability are noticed.

  3. Determination of radon and radium concentrations in drinking water samples around the city of Kutahya

    International Nuclear Information System (INIS)

    Sahin, L.; Cetinkaya, H.; Murat Sac, M.; Ichedef, M.

    2013-01-01

    The concentration of radium and radon has been determined in drinking water samples collected from various locations of Kutahya city, Turkey. The water samples are taken from public water sources and tap water, with the collector chamber method used to measure the radon and radium concentration. The radon concentration ranges between 0.1 and 48.6±1.7 Bq l -1 , while the radium concentration varies from a minimum detectable activity of -1 in Kutahya city. In addition to the radon and radium levels, parameters such as pH, conductivity and temperature of the water, humidity, pressure, elevation and the coordinates of the sampling points have also been measured and recorded. The annual effective dose from radon and radium due to typical water usage has been calculated. The resulting contribution to the annual effective dose due to radon ingestion varies between 0.3 and 124.2 μSv y -1 ; the contribution to the annual effective dose due to radium ingestion varies between 0 and 143.3 μSv y -1 ; the dose contribution to the stomach due to radon ingestion varies between 0.03 and 14.9 μSv y -1 . The dose contribution due to radon inhalation ranges between 0.3 and 122.5 μSv y -1 , assuming a typical transfer of radon in water to the air. For the overwhelming majority of the Kutahya population, it is determined that the average radiation exposure from drinking water is less than 73.6μmSv y -1 . (authors)

  4. The concentration of radon in a town where radium-activated paints were used

    International Nuclear Information System (INIS)

    Lauffenburger, T.; Auf der Maur, A.

    1984-01-01

    In a particular town in the Swiss Jura, important for its watch industry, probably 20 workshops existed between 1920 and 1963, where dials and faces were painted with radium-activated paints. Some workshops produced even their own paints. After removal of the radium and complete decontamination of such workshops, which presents its own problems, one sometimes still finds a high radon concentration in the cellar of such a workshop. Similar high values are sometimes found also in adjacent houses. In that particular town, however, a larger area was concerned. (orig.)

  5. Experimental study of radium partitioning between anorthite and melt at 1 atm

    Energy Technology Data Exchange (ETDEWEB)

    Miller, S; Burnett, D; Asimow, P; Phinney, D; Hutcheon, I

    2007-03-08

    We present the first experimental radium mineral/melt partitioning data, specifically between anorthite and a CMAS melt at atmospheric pressure. Ion microprobe measurement of coexisting anorthite and glass phases produces a molar D{sub Ra} = 0.040 {+-} 0.006 and D{sub Ra}/D{sub Ba} = 0.23 {+-} 0.05 at 1400 C. Our results indicate that lattice strain partitioning models fit the divalent (Ca, Sr, Ba, Ra) partition coefficient data of this study well, supporting previous work on crustal melting and magma chamber dynamics that has relied on such models to approximate radium partitioning behavior in the absence of experimentally determined values.

  6. Quantitative regularities of magnesium, calcium, radium-226, and thorium migration from soils to plants

    International Nuclear Information System (INIS)

    Ashkinazi, Eh.I.

    1980-01-01

    Concentrations of magnesium, calcium, radium 226, thorium 228 in podsolized chernozem and grey medium-loamy soils were determined under conditions of ordinary farming. Concentrations of these elements were determined in soils and main agricultural plants: wheat, barley, peas, potatoes, beets, and carrots. Transition coefficients of magnesium, calcium, and radium 226 from soils to plants were calculated and the following series of transition coefficients were determined: to Mg> to Ca> to Ra. Transition coefficients from dern-podsolic soils were 3-27 times higher than from chernozem

  7. Radium remediation - History and Present Day. A Worldwide Overview Compendium (DVD) first Edition

    International Nuclear Information System (INIS)

    Zelmer, Robert; Ouzounian, Gerald; Cochard, Guillaume; Huchette, Nathalie; Fowlie, Glenna

    2011-09-01

    The environmental impact of radium remains even today. The legacy of radio-luminescent paints, radium therapy needles, mining and processing and associated contamination has long been pursued in France, Belgium, Canada, the USA and other countries. The management of these tasks provides a rich and fascinating history as well as successes and lessons learned in environmental remediation. This Compendium provides an immediate resource to those who wish to investigate these subjects further and a means of adding to the resource. It contains links, movies, documents and references

  8. Central nervous system tumors and related intracranial pathologies in radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Semkiw, W.

    1988-01-01

    Among the female radiation workers in the radium dial industry there is no overall excess of brain or central nervous system tumors. A significant excess did appear, however, in one of three major cohorts; the excess was not due to an excess of gliomas and cannot be ascribed with certainty to radium or external radiation. A significant proportional excess of tumors outside the brain was observed, and is consistent with irradiation of nervous system tissue from adjacent bone. Early deaths from brain abscess or mastoiditis, which are coded as diseases of the nervous system and sense organs, were observed. 12 refs., 11 tabs

  9. Collecting campaign for dials and hands with radium or tritium paint

    International Nuclear Information System (INIS)

    Hammans, M.; Grunder, R.; Schaellibaum, H.

    2005-01-01

    The production of radium paint has been stopped in Switzerland nearly 40 years ago. Nevertheless high quantities of dials and hands with radium paint could be found in the stocks of watch companies. In addition these parts of watches were thrown away illegally as scrap metal or as rubbish. As a consequence the Swiss National Accident Insurance Fund (Suva) has organized a collecting campaign in collaboration with the Federal Office of Public Health (BAG). It was the fourth one during the last 20 years. The procedure and the experiences will be described in more details. (orig.)

  10. Central nervous system tumours and related intracranial pathologies in radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Semkiw, W.

    1989-01-01

    Among female radiation workers in the radium dial industry there is no overall excess of fatal brain or central nervous system tumours. A significant excess did appear, in one of three major cohorts; the excess was not due to an excess of gliomas and cannot be ascribed with certainty to radium or external radiation. A significant proportional excess of tumours outside of the brain was observed, consistent with irradiation of nervous system tissue from adjacent bone. Excess tumours of the eye, pituitary or pineal did not occur. Early deaths from brain abscess or mastoiditis, coded as diseases of the nervous system and sense organs, were observed. (author)

  11. Environmental consequences of the placement of radium-barium sludge in tailings areas

    International Nuclear Information System (INIS)

    Huck, P.M.; Brown, J.R.; Multimaki, G.; Murphy, K.L.

    1982-01-01

    A preliminary evaluation was made of the implications of placing radium-barium sludge in tailings areas. The study was restricted to a consideration of possible increases in the quantities of radionuclides escaping to the environment through either groundwater or surface water, considering the types of tailings treated and the effluent treatment systems currently operating in Canada. It was concluded that the placement of radium/barium sludge in tailings areas should not adversely affect the long-term stability of the radionuclides in the tailings or sludge, based on geochemical inorganic reactions

  12. Radium removal for a small community water-supply system. Research report, 1 October 1985-30 September 1987

    International Nuclear Information System (INIS)

    Mangelson, K.A.

    1988-07-01

    In 1984, a radium-removal treatment plant was constructed for the small community of Redhill Forest located in the central mountains of Colorado. The treatment plant consists of a process for removing iron and manganese ahead of an ion-exchange process for the removal of radium. The raw water comes from deep wells and has naturally occurring radium and iron concentrations of about 30-40 pCi/L and 7-10 mg/L, respectively. Before the raw water enters the main treatment plant, the raw water is aerated to remove radon gas and carbon dioxide. The unique features of the Redhill Forest Treatment Plant are related to the ways in which the radium removed from the raw water is further treated and eventually disposed of as treatment plant waste. A separate system removes only radium from the backwash/regeneration water of the ion exchange process and the radium is permanently complexed on a Radium Selective Complexer (RSC) resin made by Dow Chemical. The RSC resin containing radium is replaced with virgin resin as needed and the resin waste transported to a permanent final disposal site in Beatty, NV. This report presents a detailed description of the Redhill Forest treatment system and the results of in-depth monitoring of the processes and other factors relating to the overall operation of the radium-removal system. Included are descriptions of modifications made in the plant operation to improve the overall system operation and of the procedures for final disposal of the RSC resin-containing radium

  13. The determination, by x-ray spectrometry, of trace amounts of tin in titanium-bearing ores and concentrates and in siliceous materials

    International Nuclear Information System (INIS)

    Jacobs, J.J.; Balaes, A.M.E.

    1980-01-01

    The method involves the preparation of briquettes, one of which consists of the sample material and an inert diluent, the other of the sample material and a standard reference material. After the briquettes have been analysed, a correction is made for the background of the matrix, which is based on the intensity function, (peak - background)/background. No calibration graph is required. The lower level of detection of the method is 10 p.p.m., and the relative standard deviation is 0,1 at a tin concentration of 100 p.p.m. A computer programme for the off-line processing of intensity data is listed in an appendix

  14. Radium equivalent in clays extracted in Northeast cities of Brazil and used in civil construction

    International Nuclear Information System (INIS)

    Araujo, Eduardo E.N.; Junior, Jose Araujo S.; Amaral, Romilton S.; Santos, Josineide M.N.; Rojas, Lino A.V.; Fernandez, Zahily H.

    2017-01-01

    The Earth's crust may have different levels of natural radioactivity as a consequence of the different types of minerals that form its composition. Exploration activities of natural sources may have a high radiometric impact for the radionuclides of the natural series and contributes to radionuclides transitions to others areas. The distribution of natural radioactive elements 226 Ra, 232 Th, and 40 K in rock and soil is not uniform and as a consequence all building materials contain amounts of natural radioactive substances. This study aimed to establish the calculation of the Equivalent Radium Activity (Ra Eq ) in brickwork's clays in the adjacent area to the uranium deposits in Northeast Brazil cities in the states of Paraiba and Rio Grande do Norte. The analyses were performed using the non-destructive method HPGe-Be gamma spectrometry. Twenty-eight samples were collected from ten brickworks in the cities of Sao Jose do Sabugi and Santa Luzia, in Paraiba State and Santana do Serido and Parelhas, in Rio Grande do Norte State. The activities of RaEq ranged from 84.5 to 747.8 Bq/kg with an average of 334.0 Bq/kg. Approximately 29% of the analyzed samples had activities of RaEq above the limit defined by UNSCEAR (the limit is 370 Bq/kg), where the clays must have its sources of extraction monitored, respecting the radioecological protection rules. From the qualification of the samples, it has been certified that the radionuclides present in this study are exclusively of natural origin. (author)

  15. Radium equivalent in clays extracted in Northeast cities of Brazil and used in civil construction

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Eduardo E.N.; Junior, Jose Araujo S.; Amaral, Romilton S.; Santos, Josineide M.N.; Rojas, Lino A.V.; Fernandez, Zahily H., E-mail: eduardo.eudes@ufpe.br, E-mail: jaraujo@ufpe.br, E-mail: romilton@ufpe.br, E-mail: josineide.santos@ufpe.br, E-mail: lino.valcarcel@ufpe.br, E-mail: zahily1985@gmail.com [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear

    2017-11-01

    The Earth's crust may have different levels of natural radioactivity as a consequence of the different types of minerals that form its composition. Exploration activities of natural sources may have a high radiometric impact for the radionuclides of the natural series and contributes to radionuclides transitions to others areas. The distribution of natural radioactive elements {sup 226}Ra, {sup 232}Th, and {sup 40}K in rock and soil is not uniform and as a consequence all building materials contain amounts of natural radioactive substances. This study aimed to establish the calculation of the Equivalent Radium Activity (Ra{sub Eq}) in brickwork's clays in the adjacent area to the uranium deposits in Northeast Brazil cities in the states of Paraiba and Rio Grande do Norte. The analyses were performed using the non-destructive method HPGe-Be gamma spectrometry. Twenty-eight samples were collected from ten brickworks in the cities of Sao Jose do Sabugi and Santa Luzia, in Paraiba State and Santana do Serido and Parelhas, in Rio Grande do Norte State. The activities of RaEq ranged from 84.5 to 747.8 Bq/kg with an average of 334.0 Bq/kg. Approximately 29% of the analyzed samples had activities of RaEq above the limit defined by UNSCEAR (the limit is 370 Bq/kg), where the clays must have its sources of extraction monitored, respecting the radioecological protection rules. From the qualification of the samples, it has been certified that the radionuclides present in this study are exclusively of natural origin. (author)

  16. Polar bears, Ursus maritimus

    Science.gov (United States)

    Rode, Karyn D.; Stirling, Ian

    2017-01-01

    Polar bears are the largest of the eight species of bears found worldwide and are covered in a pigment-free fur giving them the appearance of being white. They are the most carnivorous of bear species consuming a high-fat diet, primarily of ice-associated seals and other marine mammals. They range throughout the circumpolar Arctic to the southernmost extent of seasonal pack ice.

  17. Radium 226 and lead 210 water extraction from mill tailings samples

    International Nuclear Information System (INIS)

    Fourcade, N.; Zettwoog, P.; Mery, G.

    1994-01-01

    Depositories for waste from the processing of uranium ore may release seepage waters into the environment through their impoundments. Seepage waters, when percolating through the wastes, extract radium 226. In the design or rehabilitation stage of such depositories, the exposure of critical groups of the population to radium 226 from the ground water pathway must be assessed. The same applies to lead 210. The first step is to assess the possibility of extracting the radium 226 and the lead 210 from samples of solid wastes and sludges in laboratory tests using water from the site. Extensive tests of this type were carried out in our laboratories between 1982 and 1991 on samples of mill tailings which had been collected in six installations of COGEMA and its subsidiaries. The main results are presented and analyzed. Physical, chemical and mineralogical factors influencing the leaching rates and the total quantity of water-extractable radium 226 are identified. In the case of a wet storage option, a tentative modelling of the water extraction phenomenon is proposed for the prediction of the source term both in the short term, and in the long term when all more or less soluble salts have been eliminated from the solid wastes

  18. Carcinoma of the vagina. [Complications following whole-pelvis. gamma. irradiation and radium implant therapy

    Energy Technology Data Exchange (ETDEWEB)

    Marcus, R.B. Jr.; Million, R.R.; Daly, J.W.

    1978-11-01

    Twenty-two patients with Stage I through IV primary vaginal squamous cell carcinomas treated for cure with radiation therapy are reviewed, with particular emphasis on the relationship of dose to complications and local control. All but 2 patients received 4000 to 6000 rad whole pelvis irradiation plus at least one radium application. Local control was 91%, with an absolute 2-year disease-free survival of 82%. The degree of anaplasia was found to influence prognosis, with all local and distant failures resulting from high-grade lesions. The complication rate was modest, with no fistulae or serious bowel complications. An analysis of total dose (external plus radium) with respect to local failure and complications showed that no major complications occurred at a combined dose below 9000 rad. An analysis of the individual contributions of external irradiation and radium implants showed that all but one very minor complication occurred at a radium dose of 4000 rad or higher. From these data, overall treatment planning and total dose recommendations are made.

  19. Uranium,Radium and Iron Absorption from Liquid Waste Uranium Ore Processing by Zeolite

    International Nuclear Information System (INIS)

    Wismawati, T; Sorot sudiro, A; Herjati, T

    1998-01-01

    The aim of this work is to determine zeolites sorption capacity and the distribution coefficient of uranium, radium, and iron in zeolite-liquid waste system. Mineralogical composition of zeolite used in the experiment has been determine by examining the thin sections of zeolite grains under a microscope. Zeolite has ben activated by the dilute sulfuric acid or sodium hydroxide solution. The results show that the use of 0.25 N sodium hydroxide solution could be optimizing the zeolite for uranium and iron ions sorption and that of 0.1 N sulfuric acid solution is for radium sorption. The re-activation process has been carried out in three hours. Under such a condition, the sorption efficiency of zeolite to those ions have been known to be 45.85% for uranium, 96.63 % for iron and 87.80 % for radium. The distribution coefficients of uranium, radium and iron ion in zeolite-liquid waste system have been calculated 0.85, 7.02, and 28.65 ml/g respectively

  20. Alpha low activity determination from limitter isotopes of uranium, thorium ands radium in natural waters

    International Nuclear Information System (INIS)

    Gascon, J.L.; Crespo, M.T.; Acena, M.L.

    1989-01-01

    A method to concentrate uranium, thorium and radium in natural waters has been developed. The method, based on the adsorbing propert-ies of manganes dioxide, has been applied to determine the alpha emitter isotopes of these elements in drinking water of Madrid. In this work we present the description of the method, the analytical procedu-res and the obtained results. (Author)

  1. Multiple myeloma, leukemia, and breast cancer among the US radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Lucas, H.F.; Stehney, A.F.

    1983-01-01

    The relationships of radium exposure to mortality from multiple myeloma, leukemia, and breast cancer were studied in three cohorts of female dial workers defined by year of first employment. Mortality was compared with that expected from US white female rates, with and without adjustment for local mortality rates. Dose-response relationships of these cancers to systemic intake of radium were determined in workers whose body burdens had been measured in vivo since 1955. Incident cases of multiple myeloma occurred in the pre-1930 cohort; however, analyses of body burdens and durations of employment suggest that external radiation was more likely to have been responsible than was internal radium. Leukemia incidence and mortality have not been elevated overall among the female dial workers, either in the pre-1930 or the post-1930 cohorts, but cases have tended to occur early and in subjects with higher body burdens. Extensive analyses of breast cancer data have uncovered several observations weighing against a causal interpretation of the association between radium and breast cancer

  2. Detecting buried radium contamination using soil-gas and surface-flux radon meaurements

    International Nuclear Information System (INIS)

    Karp, K.E.

    1988-06-01

    The Technical Measurements Center (TMC) has investigated the effectiveness of using radon soil-gas under surface-flux measurments to locate radium contamination that is buried sufficiently deep to be undetectable by surface gamma methods. At the first test site studied, an indication of a buried source was revealed by mapping anomalous surface-flux and soil-gas concentrations in the near surface overburden. The mapped radon anomalies were found to correspond in rough outline to the shape of the areal extent of the deposit as determined by borehole gamma-ray logs. The 5.9pCi/g radium deposit, buried 2 feet below the surface, went undetected by conventional surface gamma measurements. Similar results were obtained at the second test site where radon and conventional surface gamma measurements were taken in an area having radium concentrations ranging from 13.3 to 341.0 pCi/g at a depth of 4 feet below the surface. The radon methods were found to have a detection limit for buried radium lower than that of the surface gamma methods, as evidenced by the discovery of the 13.3 pCi/g deposit which went undetected by the surface gamma methods. 15 refs., 33 figs., 8 tabs

  3. Non-neoplastic calcified tissue pathologies among radium workers and plutonium injectees

    International Nuclear Information System (INIS)

    Stebbings, J.H.

    1997-01-01

    Two human studies of deterministic effects of radium and plutonium are summarized. Histopathology data from femurs of New Jersey radium workers demonstrate effects of radium at ∼0.8 Gy skeletal dose. Toxicity ratio data from beagles suggest equivalent histopathological effects from 239 Pu may occur in humans at skeletal doses of ∼0.12 Gy in compact bone or at ∼0.01-0.02 Gy in spongy bone. These results support observations that subjects injected with plutonium in the 1940s showed bone changes typical of alpha radiation exposures, extensive osteoporosis with related fractures, and hearing disorders or vertigo related to bone damage and/or middle ear inflammation, all findings suggested by the clinical radium literature. A probable case of extensive pathologic calcification from a plutonium injection also occurred. In two cases suspect findings occurred at skeletal doses of ∼0.05 Gy. It is hypothesized that subjects with collagen disorders and uremic insufficiencies, as well as females late in life, form subpopulations susceptible to non-stochastic effects of internal alpha-emitters. In general, bone fractures late in life secondary to osteoporosis are associated with increased disability, increased risk of institutionalization, and with diminished survival rates. (author)

  4. New technique of uterine body carcinoma brachytherapy. Pt. 1. Radium chain

    Energy Technology Data Exchange (ETDEWEB)

    Rattka, P.; Jedrus, S. (Instytut Onkologii, Gliwice (Poland))

    1980-01-01

    A simple technique of uterine cavity tamponade with radium charges arranged in a chain has been evolved, establishing at the same time an optimal dose on the basis of computer calculations. Own experiences with the use of this technique in 31 patients are presented.

  5. Late health effects of childhood nasopharyngeal radium irradiation: nonmelanoma skin cancers, benign tumors, and hormonal disorders

    NARCIS (Netherlands)

    Ronckers, Cécile M.; Land, Charles E.; Hayes, Richard B.; Verduijn, Pieter G.; Stovall, Marilyn; van Leeuwen, Flora E.

    2002-01-01

    Nasopharyngeal radium irradiation (NRI) was widely used from 1940 through 1970 to treat otitis serosa in children and barotrauma in airmen and submariners. We assessed whether NRI-exposed individuals were at higher risk for benign tumors, nonmelanoma skin cancer, thyroid disorders, and conditions

  6. Radium-228 and -226 levels in a river environment and its modification by human activities

    International Nuclear Information System (INIS)

    Paul, A.C.; Londhe, V.S.; Pillai, K.C.

    1978-01-01

    The river Periyar is of prime importance in the economy of Kerala State due to the anifold utility of its waters. Consistently high background levels of radium-228 in the river water amounting to 10% of (MPC)sub(w) during the peak and lean flow periods suggest geochemical transport from the drainage areas. Industrial discharges enhance Ra levels by an order of magnitude in downstream locations. Monazite and rockp2hosphate processes, predominently contributing radium-228 and radium-226 respectively, change the nuclide ratio in the river environment due to differential inputs. Contribution of radium-226 through liquid effluents to the river from either process is of the same order of magnitude which together account for only 5% of the process output, the remaining 95%, held in the fertilizer sludges of CaCO 3 /CaCO 4 , disposed off on land, is a potential source of this activity in the environment. River bed sediments carrying bulk of Ra get displaced to backwaters where partial solubilisation takes place due to monsoon flushes. Uptake of Ra by fish in industrial and downstream locations in the river were evident. Analysis of paddy indicates higher uptake by soil and hay due to irrigation by river water drawn from downstream and marginal increase of activity in the fertilizer applied field. (author)

  7. Local bone mineral mass as a function of dose in radium cases

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Bone mineral mass at specific sites in the forearms and fingers of females with exposure to radium and mesothorium appears to have no dependence on dose. Data analysis is continuing, so these results should be considered preliminary. Future analyses will include males

  8. Influence of mine waste water purification on radium concentration in desalinisation products

    International Nuclear Information System (INIS)

    Chalupnik, S.

    2005-01-01

    The effects of mine waste water treatment in the desalination process on radium concentration in final products have been shown on the example of installations working in 'Ziemowit' and 'Piast' Polish coal mines. The environmental impact and health hazard resulting deposition of waste water treatment plant by-products have been also discussed

  9. Lymphoblastogenesis in response to phytohemagglutinin in radium patients: quantitative aspects and reproducibility

    International Nuclear Information System (INIS)

    Serio, C.S.; Henning, C.B.; Lloyd, E.L.

    1978-01-01

    Lymphocyte stimulation by different concentrations of phytohemmagglutinin (PHA) provided a profile of lymphocyte responsiveness in 5 normal subjects and 40 radium dial painters. This profile will, hopefully, improve detection of lymphocyte defects in patients with impairment of cellular immunity. When a suboptimal dose (0.15 μg PHA-protein) was used, decreased lymphocyte responsiveness was observed in patients with high body burdens of 226 Ra (> 0.1 μCi) compared with patients with low body burdens (< 0.1 μCi) and normal subjects. At all other PHA concentrations, the lymphocyte responsiveness was not significantly different in these three groups. A decrease in lymphocyte response was found with age in both normal controls and in the radium patients, but the decrease appeared to be somewhat greater in the radium patients above 50 years of age. To test the significance of these findings, larger numbers of control subjects in the higher age groups and low body burden radium patients known not to be on any type of medication will have to be examined

  10. Natural radioactivity of building materials

    International Nuclear Information System (INIS)

    Mrnustik, J.

    1988-01-01

    Within a study of the natural radioactivity of building materials, coefficients were determined of the emanation from selected materials and raw materials, such as porous concrete, bricks, marlite, quartzite, etc. Measurements were made of ground samples using Lucas scintillation chambers which give an accuracy of determination of the coefficient of about 10%. Specific radium activity was also determined for the samples. Tabulated is a comparison of the average specific activity of radium in concrete, power plant ash and porous concrete in Czechoslovakia and abroad. It is stated that monitoring the content of natural radionuclides in building materials is an indispensable part of the production process in the building industry, this with regard to the radiation protection of the population. This will be enhanced by the new Czechoslovak standard determining methods of measuring the content of natural radionuclides and the coefficient of radon emanation, and the subsequent evaluation of the properties of building materials. (Z.M.) 3 figs., 3 tabs

  11. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  12. Bearing restoration by grinding

    Science.gov (United States)

    Hanau, H.; Parker, R. J.; Zaretsky, E. V.; Chen, S. M.; Bull, H. L.

    1976-01-01

    A joint program was undertaken by the NASA Lewis Research Center and the Army Aviation Systems Command to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. No bearing failures occurred related to the restoration by grinding process. The risk and cost of a bearing restoration by grinding programs was analyzed. A microeconomic impact analysis was performed.

  13. Polar bears at risk

    Energy Technology Data Exchange (ETDEWEB)

    Norris, S.; Rosentrater, L.; Eid, P.M. [WWF International Arctic Programme, Oslo (Norway)

    2002-05-01

    Polar bears, the world's largest terrestrial carnivore, spend much of their lives on the arctic sea ice. This is where they hunt and move between feeding, denning, and resting areas. The world population, estimated at 22,000 bears, is made up of 20 relatively distinct populations varying in size from a few hundred to a few thousand animals. About 60 per cent of all polar bears are found in Canada. In general, the status of this species is stable, although there are pronounced differences between populations. Reductions in the extent and thickness of sea ice has lead the IUCN Polar Bear Specialist Group to describe climate change as one of the major threats facing polar bears today. Though the long-term effects of climate change will vary in different areas of the Arctic, impacts on the condition and reproductive success of polar bears and their prey are likely to be negative. Longer ice-free periods resulting from earlier break-up of sea ice in the spring and later formation in the fall is already impacting polar bears in the southern portions of their range. In Canada's Hudson Bay, for example, bears hunt on the ice through the winter and into early summer, after which the ice melts completely, forcing bears ashore to fast on stored fat until freeze-up in the fall. The time bears have on the ice to hunt and build up their body condition is cut short when the ice melts early. Studies from Hudson Bay show that for every week earlier that ice break-up occurs, bears will come ashore 10 kg lighter and in poorer condition. It is likely that populations of polar bears dividing their time between land and sea will be severely reduced and local extinctions may occur as greenhouse gas emissions continue to rise and sea ice melts. Expected changes in regional weather patterns will also impact polar bears. Rain in the late winter can cause maternity dens to collapse before females and cubs have departed, thus exposing occupants to the elements and to predators. Such

  14. Radium-226 in vegetation and substrates at inactive uranium mill sites

    International Nuclear Information System (INIS)

    Marple, M.L.

    1980-01-01

    Results of a study of the content of radium-226 in plants growing on inactive uranium mill tailings sites in the Four Corners Region of the southwestern United States and in plants grown under greenhouse conditions with minimal surficial contamination are reported. Field plant samples and associated substrates were analyzed from two carbonate tailings sites in the Grants Mineral Belt of New Mexico. Radium activities in air-cleaned samples ranged from 5 to 368 pCi/g (dry weight) depending on species and location: activities in plants growing on local soils averaged 1.0 pCi/g. The talings and local soils contain 140 to 1400 pCi/g and 2.1 pCi/g, respectively. An evaluation of cleaning methods on selected samples showed that from 17 to 79% of the radium activity measured in air-cleaned samples was due to surficial contamination, which varied with species and location. A survey of 18 inactive uranium mill sites in the Four Corners Region was performed. Radium activity in plant tissues from nine species ranged from 2 to 210 pCi/g on bare tailings and from 0.3 to 30 pCi/g on covered tailings The radium content in most of the soil overburdens on the covered tailings piles was 10 to 17 pCi/g. An experiment was performed to measure radium-226 uptake by two species grown on tailings covered with a shallow (5 cm) soil layer. A grass, Sporobolus airoides (alkali sacaton) and a shrub, Atriplex canescens (four-wing saltbush), were studied. The tailings were a mixture of sands and slimes from a carbonate pile. The tailings treatments were plants grown in a soil cover over tailings; the controls were plants grown only in soil. Three soil types, dune sand, clay loam, and loam, were used. The radium activity of the plant tissue from the tailings treatment compared to that of the appropriate control was 1 to 19 times greater for the grass and 4 to 27 times greater for the shrub

  15. Travel report on a preparatory mission to the Agencija RAO, Ljubljana for a radium conditioning operation

    International Nuclear Information System (INIS)

    Neubauer, J.

    2001-07-01

    The purpose of the trip was to establish the current status of radioactive waste management in Slovenia, to discuss their plans for the future management of their radioactive wastes and to prepare for a radium source conditioning operation to make safe and secure their known inventory of radium withdrawn from service. The IAEA are considering placing a contract on the Oesterreichisches Forschungszentrum Seibersdorf (OeFZS) to carry out the radium conditioning operation on the agency's behalf in a manner used successfully on a number of previous occasions. In Slovenia responsibility for the management of radioactive wastes arising from nuclear applications in medicine research and industry is delegated to 'Agencija Rao'. First a visit was made to the storage building in which such wastes are stored, the building being within the grounds of the Josef Stefan Institute in Ljubljana. The possibility of carrying out the radium conditioning operation in the building and the improvements and modifications necessary was discussed. The inventory of stored waste was reviewed, the packages containing radium were identified and located in the store. Some of these contained radium-beryllium sources. It was agreed that such sources would not be conditioned during the forthcoming operation. Next a visit was made to the chemistry laboratories of the Josef Stefan Institute, these being a possible alternative location for the operation. On returning to the 'Agencija Rao' office in Ljubljana detail discussion of the merits of the alternative locations were discussed. It was realized that the operation could proceed quicker and at less cost if the existing laboratory was chosen, the unknown factor is the time taken to obtain regulatory approval. Next detailed discussion took place of the availability of necessary equipment and consumable items and agreement reached on what should be supplied locally and what should be brought to Slovenia, by the conditioning team. Plans were made to

  16. Radium-226 in vegetation and substrates at inactive uranium mill sites

    Energy Technology Data Exchange (ETDEWEB)

    Marple, M.L.

    1980-01-01

    Results of a study of the content of radium-226 in plants growing on inactive uranium mill tailings sites in the Four Corners Region of the southwestern United States and in plants grown under greenhouse conditions with minimal surficial contamination are reported. Field plant samples and associated substrates were analyzed from two carbonate tailings sites in the Grants Mineral Belt of New Mexico. Radium activities in air-cleaned samples ranged from 5 to 368 pCi/g (dry weight) depending on species and location: activities in plants growing on local soils averaged 1.0 pCi/g. The talings and local soils contain 140 to 1400 pCi/g and 2.1 pCi/g, respectively. An evaluation of cleaning methods on selected samples showed that from 17 to 79% of the radium activity measured in air-cleaned samples was due to surficial contamination, which varied with species and location. A survey of 18 inactive uranium mill sites in the Four Corners Region was performed. Radium activity in plant tissues from nine species ranged from 2 to 210 pCi/g on bare tailings and from 0.3 to 30 pCi/g on covered tailings The radium content in most of the soil overburdens on the covered tailings piles was 10 to 17 pCi/g. An experiment was performed to measure radium-226 uptake by two species grown on tailings covered with a shallow (5 cm) soil layer. A grass, Sporobolus airoides (alkali sacaton) and a shrub, Atriplex canescens (four-wing saltbush), were studied. The tailings were a mixture of sands and slimes from a carbonate pile. The tailings treatments were plants grown in a soil cover over tailings; the controls were plants grown only in soil. Three soil types, dune sand, clay loam, and loam, were used. The radium activity of the plant tissue from the tailings treatment compared to that of the appropriate control was 1 to 19 times greater for the grass and 4 to 27 times greater for the shrub.

  17. Estimating SGD flux in the Pingtung Plain coastal area by using Radon and Radium isotopes

    Science.gov (United States)

    Li Chang, Yao; Chieh Su, Chih

    2015-04-01

    In the past two decades, submarine groundwater discharge (SGD) has been recognized as an important pathway to transport material into coastal area. Our study area is located at Pingtung Plain which is the second largest plain in Taiwan with three major rivers, including Gaoping, Donggang and Linbian Rivers, flow through the plain. The Gaoping River, which has the largest drainage area, flows throughout the central part of the plain. The Pingtung Plain composed by four aquifers in different depths (0, 50, 100, and 200 m) and each layer extends to coastal area. Groundwater is an important water resource for local agriculture and aquaculture. However, the long-term over-pumping induced subsidence problem makes salinization at some coastal area. Some previous studies pointed out the SGD accounts for 80% or more of the mass of freshwater in Fangshan coast, depends on salinity and stable isotopes research. In this study, the radioactive tracers, Radon (222Rn, T1/2=3.8 d) and short-lived Ra isotopes (223Ra, T1/2=11.4 d & 224Ra, T1/2=3.6 d) are used in tracing SGD off the Pingtung Plain. During 2013 to 2014, the terrestrial water samples were collected from Gaoping, Donggang, Linbian Rivers and springs in different seasons. We also conducted two coastal waters cruises by using R/V Ocean Researcher 3 (OR3-1768 and 1799 cruises in May and September 2014). Continuous 222Rn was measured by RAD7 equipped with RAD-AQUA system and large volume (20 L) seawater samples were collected by CTD/Rosette water sampler with Niskin sterile bottles. Water samples were flow through Mn-fiber (flow rate < 1 LPM) to concentrate the Ra isotopes, and counted via RaDeCC system. In spatial variation, our result shows the excess 224Ra in the downstream of Gaoping River (2.39 dpm 100L-1) is higher than upstream (1.09 dpm 100L-1). It indicates the groundwater input may play an important role at the downstream of Gaoping River. For temporal variation, excess 224Ra in the Gaoping River are higher in wet

  18. Monitoring of lubrication conditions in journal bearing by acoustic emission

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Jung, Min Hwa

    1993-01-01

    Systems with journal bearings generally operate in large scale and under severe loading conditions such as steam generator turbines and internal combustion engines, in contrast to the machinery using rolling element bearings. Failure of the bearings in these machinery can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings.

  19. Fatigue life of drilling bit bearings under arbitrary random loads

    Energy Technology Data Exchange (ETDEWEB)

    Talimi, M.; Farshidi, R. [Calgary Univ., AB (Canada)

    2009-07-01

    A fatigue analysis was conducted in order to estimate the bearing life of a roller cone rock bit under arbitrary random loads. The aim of the study was to reduce bearing failures that can interrupt well operations. Fatigue was considered as the main reason for bearing failure. The expected value of cumulative fatigue damage was used to estimate bearing life. An equation was used to express the relation between bearing life and bearing load when the bearing was subjected to a steady load and constant speed. The Palmgren-Miner hypothesis was used to determine the ultimate tensile strength of the material. The rain flow counting principle was used to determine distinct amplitude cycles. Hertzian equations were used to determine maximum stress loads. Fourier series were used to obtain simple harmonic functions for estimating stress-life relations. It was concluded that the method can be used during the well planning phase to prevent bearing failures. 6 refs.

  20. High porewater exchange in a mangrove-dominated estuary revealed from short-lived radium isotopes

    Science.gov (United States)

    Sadat-Noori, Mahmood; Santos, Isaac R.; Tait, Douglas R.; Reading, Michael J.; Sanders, Christian J.

    2017-10-01

    We hypothesise that mangroves play an important role in groundwater exchange processes in sub-tropical and tropical estuarine waters. To investigate this, multiple high resolution time series measurements of radium across a tidal estuary (Coffs Creek, NSW, Australia) were performed as well as a spatial survey in both bottom and surface layers. Results from the spatial survey revealed increasing radium concentrations in parts of the estuary surrounded by mangroves. The average radium concentration in estuary areas lined with mangroves was 2.5 times higher than the average concentration at the mouth of the estuary and 6.5-fold higher than upstream freshwater areas. Additionally, the area enriched in radium coincided with low dissolved oxygen concentrations, implying that porewater exchange may drive anoxia. A radium mass balance model based on 223Ra and 224Ra isotopes at different sections of the estuary confirmed higher porewater exchange rates from areas fringed with mangrove vegetation. Estimated porewater exchange rates were 27.8 ± 5.3 and 13.6 ± 2.1 cm d-1 (0.8 ± 0.1 and 0.4 ± 0.1 m3 s-1) based on 223Ra and 224Ra isotopes, respectively. The average saline porewater exchange was ∼ 10-fold larger than the upstream surface freshwater inputs to the estuary. We suggest that mangrove environments within subtropical estuaries are hotspots for porewater exchange due to the complex belowground structure of crab burrows and the effect of tidal pumping. Because porewater exchange releases carbon and nitrogen from coastal sediments, development and modification of mangrove areas in subtropical estuaries have a significant effect on coastal biogeochemical cycles.