Erfolgreiches Lernen in einem Blended Learning-Szenario im Vergleich mit der Präsenzausbildung - am Beispiel einer MTA-Ausbildung der Fachrichtung Radiologie [Successful learning in a blended learning scenario in comparison with face-to-face instruction - illustrated by the example of the training of medical technical assistants specialising in radiology

Directory of Open Access Journals (Sweden)

Hohenberg, Gregor

2009-11-01

Full Text Available [english] Purpose: This article presents partial results of an evaluation study which compared a three-year blended learning scenario with traditional face-to-face training for medical technical assistants specialising in radiology. Methods: The blended learning approach investigated here is based on an individual tutoring approach, i.e. students work on the necessary training units during self-learning periods, while a tutor is available at all times via the Internet. Following the theory of constructivism, the tutor should see him- or herself as a coach supporting the learner working on the individual training units. As the Saarland University Hospital offers both face-to-face training and the blended learning course, it was possible to perform direct comparative tests. Results: On the basis of the final state examination results, it could be shown that the participants of the blended learning course achieved equivalent or slightly better exam results. Conclusion: The positive results of the blended learning participants gain increased significance against the backdrop of the demographic data of both groups of participants: with an average age of 43 (median: 43, the blended learning participants show a significantly higher life experience compared to the face-to-face training participants, who had an average age of 28 (median: 25. That shows that the blended learning method is a good method to be used by people working in radiology. [german] Zielsetzung: Dieser Artikel stellt Teilergebnisse einer Evaluationsstudie dar, deren Zielsetzung es ist, ein dreijähriges Blended learning-Szenario mit einer klassischen Präsenzausbildung für medizinisch-technische Assistenten der Fachrichtung Radiologie zu vergleichen. Methodik: Der hier untersuchte Blended Learning-Ansatz beruht auf einem individuellen Betreuungsansatz, d. h. während die Teilnehmenden in den Selbstlernphasen die Unterrichtseinheiten bearbeiten, steht jederzeit via Internet ein

Head-neck-radiology; Kopf-Hals-Radiologie

Energy Technology Data Exchange (ETDEWEB)

Cohnen, Mathias (ed.) [Staedtische Kliniken Neuss Lukaskrankenhaus GmbH (Germany). Institut fuer klinische Radiologie

2012-11-01

The book on head-neck-radiology covers the following issues: (1) Methodic fundamentals: conventional radiography, angiography, sonography, computerized tomography, digital volume tomography, NMR imaging, nuclear medicine. (2) Base of the skull. (3) Petrous bone. (4) Pharynx. (5) Paranasal sinuses. (6) Eye socket. (7) Temporomandibular joint. (8) Salivary gland. (9) Oral cavity. (19) Parynx. (11) Neck soft tissue and lymph nodes. (12) Thyroid and parathyroid. (13) Teeth and jaw. (14) Interventions.

Incidental findings in musculoskeletal radiology; Zufallsbefunde in der muskuloskeletalen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Wuennemann, F.; Rehnitz, C.; Weber, M.A. [Universitaetsklinikum Heidelberg, Klinik fuer Diagnostische und Interventionelle Radiologie, Heidelberg (Germany)

2017-04-15

Increasing numbers of conventional X-rays, computed tomography and magnetic resonance imaging in the inpatient, outpatient and scientific routine leads to an increasing number of incidental findings. The correct interpretation of these incidental findings with respect to the relevance and the evaluation concerning further work-up is an important task of radiologists. Description of common incidental findings in musculoskeletal imaging and their clinical classification. A PubMed literature search was performed using the following terms: incidental findings, population-based imaging, musculoskeletal imaging, non-ossifying fibroma, enchondroma, osteodystrophia deformans, chondrosarcoma, fibrous dysplasia, simple bone cyst, unicameral bone cyst, solitary bone cyst, aneurysmal bone cyst, vertebral hemangioma, bone island, osteopoikilosis, Tarlov cyst and diffuse idiopathic skeletal hyperostosis (DISH). Incidental findings are observed in up to 40% of imaging procedures. In up to 6% these incidental findings involve the skeletal system. Common incidental findings are discussed and their clinical relevance is explained. (orig.) [German] Mit steigender Menge an konventionellen Roentgen- sowie CT- und MRT-Bildern im stationaeren, ambulanten und wissenschaftlichen Alltag steigt unweigerlich auch die Zahl der Zufallsbefunde. Die korrekte Einordnung bzgl. deren Relevanz, ob eine weitere Abklaerung notwendig ist oder nicht, stellt eine wichtige Aufgabe des Radiologen dar. Vorstellung haeufiger Zufallsbefunde des muskuloskeletalen Systems und deren klinische Einordnung. Pubmed-Literaturrecherche zu den Stichworten ''incidental findings'', ''population-based imaging'', ''musculoskeletal imaging'', ''non-ossifying fibroma'', ''enchondroma'', ''osteodysthrophia deformans'', ''chondrosarcoma'', ''fibrous dysplasia'', &apos

Images in medicine

African Journals Online (AJOL)

abp

11 mars 2016 ... &Corresponding author: Youssef Omor, Service d'Imagerie Médicale, Radiologie Centrale, CHU Avicenne, Rabat, Maroc. Key words: Sarcome d´Ewing, parties molles, région cervicale. Key words: Ewing's sarcoma, soft parts, cervical region. Received: 02/11/2015 - Accepted: 03/01/2016 - Published: ...

Case report

African Journals Online (AJOL)

abp

27 avr. 2016 ... Dysphagia revealing aberrant right subclavian artery: about a case. Abdelilah Mouhsine1,&, Oualid Bakzaza2, El Mehdi Atmane1, Ahmed Belkouch3, Redouane Rokhssi1, Youssef Berrada1, Mostapha. Alaoui2, M'barek Mahfoudi1, Abdelghani El Fikri1. 1Service de Radiologie, HMA, Marrakech, Maroc, ...

Connaissances et attitudes des manipulateurs radio du Togo sur l ...

African Journals Online (AJOL)

Objectif : Evaluer les connaissances et les attitudes des manipulateurs togolais sur l'irradiation médicale des grossesses. Matériels et Méthode : Etude transversale menée en Avril 2011 chez 72 manipulateurs de radiologie des structures sanitaires publiques et privées du Togo. Résultats : Le quart des manipulateurs ...

Women authorship in radiology research in France: An analysis of the last three decades.

Science.gov (United States)

Pyatigorskaya, N; Di Marco, L

2017-11-01

The aim of this study was to evaluate the evolution of women authorship in France and to analyze the recent trends of the evolution of gender differences in French academic radiology. A retrospective bibliometric analysis was performed by searching for articles published in Diagnostic and Interventional Imaging (Diagn Interv Imaging) and in Journal de Radiologie (J Radiol) in Pubmed over the last three decades. For each of these articles, we determined the gender of the first and last author. The specific radiological field of each article was also determined. The proportion of women authors has significantly increased from 12% in 1984 to 34% in 2014 (Pauthorship in Diagnostic and Interventional Imaging has increased over the last years together with the proportion of women first authors. However, the fraction of women last authors is still underrepresented. More women need to become leaders in radiological research to contribute to stimulate women authorship. Copyright © 2017 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Les fractures pathologiques secondaires des tumeurs bénignes ...

African Journals Online (AJOL)

Les fractures pathologiques secondaires des tumeurs bénignes chez l'enfant: à propos de 20 cas. ... La prise en charge de ces fractures dépend surtout de la tumeur causale et des caractéristiques de la fracture. Le rôle de la radiologie est incontournable et let traitement doit se faire selon une méthodologie précise.

Case report

African Journals Online (AJOL)

abp

4 nov. 2015 ... alimentaire. Le diagnostic préopératoire est difficile et fait appel à la radiologie. La mortalité liée aux complications varie entre 80% et 100%. Nous rapportons .... douleurs étaient consécutives à une alimentation importante suite à la rupture du jeûn .... gastric bypass operation in long-standing type I diabetic.

Materials management system in interventional radiology - initial experience with a computer-supported program; Materialverwaltung in der interventionellen Radiologie - erste Erfahrungen mit einem computergestuetzten Programm

Energy Technology Data Exchange (ETDEWEB)

Clevert, D.-A.; Reiser, M. [Universitaetsklinikum Muenchen (Germany). Institut fuer klinische Radiologie; Jung, E.M.; Rupp, N. [Institut fuer diagnostische Radiologie, Passau (Germany)

2004-10-01

Purpose: To perform a cost analysis for assessing options of reorganizing material supplies and reducing costs of the radiology division through the introduction of a materials management system. Materials and Methods: A materials management system (Piranha, Boston Scientific) was installed on an existing computer system. All consumables were inventoried and entered into the system. An ABC analysis determined further action. On the basis of order frequencies and availability requirements for emergencies, safety levels were agreed with physicians and other medical staff. Inventory costs were computed using these data. The interest rate for the capital tied up in the inventory was 8% per year. Results: The inventory showed that the capital tied up in stocks was Euro 260,000 and 2001 and Euro 190,000 in 2002. A change in supply strategy reduced inventory cost in 2001 and 2002. Annual interest expense was lowered by Euro 18,420. Another saving of Euro 2,700 was achieved by a reduction in storage cost. Annual inventory turnover totaled Euro 298,000. The total cost cut through improved inventory management was Euro 21,120 per year, which is equivalent to 7% of the annual expenses. Adding the decline in the cost of shelf time overruns equal to 5% of the annual expenses, the saving was approximately 12% of total interventional radiology cost in 2001 and some 11% in 2002. Conclusion: Flexible supply strategies and the introduction of a materials management program can help to reduce inventory costs in interventional radiology divisions without any impact on service levels. (orig.)

Evaluation de la mise en oeuvre des mesures de radioprotection ...

African Journals Online (AJOL)

Résultats : Sur les 62 services de radiologie recensés, 27.4% avaient des surfaces des salles comprises entre 10-20 m2 et 87.6% avaient des parois en briques pleines. Les portes des services étaient en bois dans 67.7% et en aluminium dans 32.3%. La grande majorité (95.2%) de ses portes étaient plombées.

20. meeting of the Gesellschaft fuer Paediatrische Radiologie

International Nuclear Information System (INIS)

The 54 papers presented at the meeting deal with the methods, reliability and specific problems of paediatric radiology. Sonography is given particular attention. Apart from conventional radiological techniques, also CT and nuclear techniques are reviewed. (MG) [de

Radiology trainer. Torso, internal organs and vessels. 2. ed.; Radiologie-Trainer. Koerperstamm, innere Organe und Gefaesse

Energy Technology Data Exchange (ETDEWEB)

Staebler, Axel [Orthopaedische Klinik Harlaching, Muenchen (Germany). Radiologische Praxis; Erlt-Wagner, Birgit (eds.) [Klinikum der Universitaet Muenchen (Germany). Inst. fuer Klinische Radiologie

2013-11-01

The radiology training textbook is based on case studies of the clinical experience, including radiological imaging and differential diagnostic discussion. The scope of this volume covers the torso, internal organs and vessels. The following issues are discussed: lungs, pleura, mediastinum; heart and vascular system; upper abdomen organs; gastrointestinal tract; urogenital system.

Short hookwire placement under imaging guidance before thoracic surgery: A review.

Science.gov (United States)

Iguchi, T; Hiraki, T; Matsui, Y; Fujiwara, H; Masaoka, Y; Uka, M; Gobara, H; Toyooka, S; Kanazawa, S

2018-05-07

During video-assisted thoracic surgery (VATS), localization is sometimes needed to detect a target lesion that is too small and/or too far from the pleura. In 1995, Kanazawa et al. developed short hookwire and suture system. Since then, this system has been placed often for selected targets before VATS in Japan. This short hookwire and suture system is a representative preoperative localization method and the placement procedure is well-established. Its placement success rates are very high (range: 97.6%-99.6%), and dislodgement of this short hookwire rarely occurs with an incidence of 0.4%-2.5%. The most common complication of short hookwire placement is pneumothorax (incidence: 32.1%-68.1%), followed by pulmonary hemorrhage (incidence: 8.9%-41.6%). Complications are frequent; however, most complications are minor and asymptomatic. Copyright © 2018 Société française de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Profil des examens radiographiques spéciaux conventionnels dans ...

African Journals Online (AJOL)

But : Montrer l'apport des examens spéciaux dans la démarche diagnostique Méthodologie : Il s'agit d'une étude rétrospective qui a porté sur les résultats de 249 examens spéciaux colligés dans le service de radiologie du CHU- Tokoin de Lomé du 1er mars 2003 au 1er mars 2004. Résultats : L'âge de nos patients varie ...

Semi-empirical model for the generation of dose distributions produced by a scanning electron beam

International Nuclear Information System (INIS)

Nath, R.; Gignac, C.E.; Agostinelli, A.G.; Rothberg, S.; Schulz, R.J.

1980-01-01

There are linear accelerators (Sagittaire and Saturne accelerators produced by Compagnie Generale de Radiologie (CGR/MeV) Corporation) which produce broad, flat electron fields by magnetically scanning the relatively narrow electron beam as it emerges from the accelerator vacuum system. A semi-empirical model, which mimics the scanning action of this type of accelerator, was developed for the generation of dose distributions in homogeneous media. The model employs the dose distributions of the scanning electron beams. These were measured with photographic film in a polystyrene phantom by turning off the magnetic scanning system. The mean deviation calculated from measured dose distributions is about 0.2%; a few points have deviations as large as 2 to 4% inside of the 50% isodose curve, but less than 8% outside of the 50% isodose curve. The model has been used to generate the electron beam library required by a modified version of a commercially-available computerized treatment-planning system. (The RAD-8 treatment planning system was purchased from the Digital Equipment Corporation. It is currently available from Electronic Music Industries

Sedoanalgesia in interventional radiology; Analgosedierung in der interventionellen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Linsenmaier, U.; Pfeifer, K.J.; Reiser, M. [Klinikum der Universitaet Muenchen, Muenchen (Germany). Inst. fuer Klinische Radiologie; Wagner, P. [Klinikum der Universitaet Muenchen, Muenchen (Germany). Inst. fuer Anaesthesiologie und Intensivmedizin; Ambulantes Operationszentrum, Muenchen Pasing (Germany)

2002-02-01

Purpose: Development of a save and effective protocol for analgosedation of patients undergoing painful interventional procedures. Material and Methods: In a prospective trial a consecutive series of 72 adult patients underwent analgosedation during painful interventions. A radiologist performed the analgosedation, the patients received a combination of a shortly effective piperidine derivative (Alfentanil [Rapifen {sup trademark} ]; 7.5-15 {mu}g/kg body weight) and Benzodiazepine (midazolam [Dormicum {sup trademark} ]; 20 {mu}g/kg body weight). After pre-procedure oxygenation patients were continuously monitored. Pain and discomfort were scored using an established visual-analog pain score (0-10). A control group (n=24) had received midazolam, pentazocine or fentanyl according to the study protocol. Results: All procedures could be carried out by an interventional radiologist and a nurse and/or technologist only. In 69/72 cases adequate analgosedation could be achieved. Injection of alfentanil was titrated, with a rapid onset and short acting effect of the analgesia. Patients reported an average pain score of 2.6 vs. 4.5 in the control group. Over 55% experienced no or mild pain (score 0-3), in the control group only 8% reached this level. Conclusion: A combination of shortly effective alfentanil and midazolam allows interventional radiologists to perform major procedures alone under effective analgosedation. This medication scheme is superior to the medication upon demand. (orig.) [German] Ziel: Die Entwicklung eines einfach zu handhabenden Protokolls fuer Radiologen zur Analgosedierung bei schmerzhaften interventionellen Eingriffen. Methoden: Prospektiv wurden 72 konsekutive Patienten zusammengefasst, bei denen schmerzhafte interventionelle Eingriffe geplant waren. Die Anlagosedierung erfolgte mit einer Kombinationsmedikation aus kurzwirksamem Piperidinderivat (Alfentanil [Rapifen {sup trademark} ]; 7,5-15 {mu}g/kg KG) und Benzodiazepin (Midazolam [Dormicum {sup trademark} ]; 20 {mu}g/kg KG). Nach praeinterventioneller Oxygenierung wurde ein kontinuierliches Monitoring durchgefuehrt. Das subjektive Schmerzempfinden der Patienten wurde mit einem visuellen Analogscore (0-10) erfasst. Die Kontrollgruppe (n=24) hatte nach Bedarf Midazolam, Pentazocin (Fortral {sup trademark}) oder Fentanylcitrat (Fentanyl {sup trademark}) erhalten. Ergebnisse: Analgosedierung war in allen Faellen jeweils von einem Radiologen und einer Assistenzperson durchfuehrbar gewesen, in 69/72 Faellen wurde eine ausreichende Analgesie erreicht. Die Gabe von Alfentanil (Rapifen {sup trademark}) wurde titriert (0,4-2,5 mg). Das maximale Schmerzempfinden (0-10) der Patienten betrug durchschnittlich 2,6, in der Kontrollgruppe 4.5. Ueber 55% der Patienten gaben keine oder nur geringe Schmerzen (score 0-3) an, in der Kontrollgruppe waren dies lediglich 8%. Schlussfolgerungen: Der kombinierte Einsatz von kurzwirksamem Alfentanil und Midazolam ermoeglicht interventionellen Radiologen eine effektive Analgosedierung von Patienten bei schmerzhaften interventionellen Eingriffen. Diese Form der Analgosedierung ist der Medikation bei Bedarf deutlich ueberlegen. (orig.)

Neoplastic lesions of the temporomandibular joint (TMJ): diagnosis, differential diagnosis and intervention; Neoplasien des Temporomandibulargelenks (TMG). Diagnostik, Differenzialdiagnostik und Intervention

Energy Technology Data Exchange (ETDEWEB)

Vogl, T.J.; Abolmaali, N.; Schedel, H.; Bergh, B. [Frankfurt Univ. (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie; Maeurer, J. [Radiologische Praxis am Prinzregentenplatz, Muenchen (Germany)

2001-09-01

Purpose. To evaluate the effectiveness of diagnostic and interventional radiological techniques for neoplastic lesions of the temporomandibular joint (TMJ). Material and methods. Modern diagnosis of the TMJ is based on the clinical use of conventional X-ray techniques, computed tomography (CT), magnetic resonance imaging (MRI) and interventional techniques like biopsies, vascular occlusion and ablation. Results. Conventional X-ray still forms the basic diagnostic procedure applied in open and closed mouth position. CT improves the diagnostic information and serves as the standard diagnostical instrument for cartaliganeous or osseous neoplastic lesions. MRI evaluates soft tissue infiltration in multiplanar techniques and high spatial resolution. Interventional vascular and ablative techniques improve the treatment of neoplastic disorders. (orig.) [German] Zielsetzung. Vorstellung der Wertigkeit bildgebender Verfahren fuer die diagnostische und interventionelle Radiologie des Temporomandibulargelenks (TMG). Material und Methodik. Die moderne Radiologie des TMG basiert auf dem Einsatz der konventionellen Roentgendiagnostik, der Computertomographie (CT) und der Magnetresonanztomographie (MRT), sowie interventioneller Verfahren wie der Biopsie, vaskulaerer Embolisationsverfahren und tumorablativer Verfahren. Ergebnisse. Als Basisdiagnostik dient die konventionelle Diagnostik in offener und geschlossener Mundposition der Erfassung von Funktionsstoerungen sowie ossaerer Destruktionen. Die CT erweitert das diagnostische Spektrum und verbessert die Differenzialdiagnostik fuer ossifizierende Prozesse. Der Einsatz der MRT erlaubt die Erfassung der Weichteilinfiltration sowie der Gelenkstrukturen. Vaskulaere interventionelle Verfahren dienen der praetherapeutischen Okklusion bzw. der palliativen Tumortherapie in Form der okklusiven Embolisation, der Chemoembolisation, oder auch der Tumorablation. (orig.)

''Leave me alone lesions'' of the bone. Part 1

International Nuclear Information System (INIS)

Hamers, S.; Freyschmidt, J.

2002-01-01

''Leave me alone lesions'' are found in such a wide variety of diseases that the survey is published in two parts, in order to be able to devote appropriate space to the description of the various lesions. This part 1 discusses the ''leave me alone lesions'' involved in juvenile bone cysts, metaphyseal cortical irregularities, fibrous metaphyseal defect (FMD), calcifying osteochondroma, osteomas and lipomas. Part 2 will be published in the next following issue of Radiologie up2date, (No.3/2002). (orig./CB) [de

Combined PACS and intranet information system in a University Hospital; Kombiniertes PACS und Intranet-Informationssystem an einem Universitaetsklinikum

Energy Technology Data Exchange (ETDEWEB)

Heiss, D.; Pfluger, T.; Pfeifer, K.J.; Hahn, K. [Muenchen Univ. (Germany). Inst. fuer Radiologische Diagnostik; Koenig, A.; Endres, S. [Muenchen Univ. (Germany). Medizinische Klinik Innenstadt

2000-06-01

Purpose: The Department of Radiology at the University Hospital Innenstadt Munich provides all clinical departments of a large university hospital with several radiology units at different locations. During the last four years all units have been fully digitalized with a stepwise installation of a PACS. The PACS also processes images from the Nuclear Medicine Department. Methods: As image modalities, archive systems and review workstations, we use devices from multiple vendors, which are integrated into a consistent system using the DICOM standard. The hospital has developed its own RIS and an intranet information system, which provides access to all reports and images from radiology for all clinical departments inside the hospital. Additionally, other clinical information such as laboratory results or ECG examinations are available through the system. Results: After one year of operation, the system succeeded in the clinical routine work as the primary source for radiological reports and images as well as for laboratory values. Conclusion: The advantages of digitalization were, besides reduction of film cost, especially optimizations of work flow with access to digital images from every where at any time. (orig.) [German] Ziel: Das Institut fuer Radiologische Diagnostik am Universitaetsklinikum Muenchen - Innenstadt versorgt mit mehreren, dezentral gelegenen Roentgenbereichen alle klinischen Abteilungen eines grossen Universitaetsklinikums. In einem Projekt der vergangenen vier Jahre wurden alle Bereiche durch die schrittweise Installation eines PACS vollstaendig digitalisiert. Dabei wurden auch nuklearmedizinische Bilddaten aus der Klinik und Poliklinik fuer Nuklearmedizin im System verarbeitet. Methoden: Eingesetzt wurden als Bilderzeuger, Archivsystem und Befundungsstationen Geraete unterschiedlicher Hersteller, die dank des DICOM Standards in einem einheitlichen System integriert sind. Neben dem PACS wurde von Mitarbeitern der Klinik ein RIS und ein Intranet

Radio-toxicological analysis of urine; Analyses radiotoxicologiques urinaires

Energy Technology Data Exchange (ETDEWEB)

Jeanmaire, L.; Jammet, H. [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

1959-07-01

The article is divided into two parts: general and technical. In the general part, a study of the behaviour of radioisotopes in the organism shows the hazards of internal contamination. In addition, the principle of the different methods for the estimation of this contamination is indicated. The second part, which is purely technical, describes some of the methods for urine analysis used in the S.H.A.R.P. radiotoxicology laboratory at the Saclay Nuclear Research Centre. The techniques relate to {sup 239}Pu, {sup 226}Ra, {sup 90}Sr, natural Th, natural U and {sup 233}U. Reprint of a paper published in Annales de Radiologie, Vol. 2, no. 9-10, p. 703-722, 1959 [French] L'article est divise en deux parties: generalites et techniques. Dans les generalites, l'etude du comportement des radioelements dans l'organisme met en evidence les dangers de la contamination interne. De plus le principe des differents moyens permettant d'apprecier cette contamination est indique. La seconde partie, purement technique, expose un certain nombre de methodes d'analyse urinaire utilisees au laboratoire de radiotoxicologie du S.H.A.R.P. au Centre d'Etudes nucleaires de Saclay. Les techniques concernent {sup 239}Pu, {sup 226}Ra, {sup 90}Sr, Th naturel, U naturel et {sup 233}U. Reproduction d'un article publie dans les Annales de Radiologie, Vol. 2, no. 9-10, p. 703-722, 1959.

APPROCHE MORPHOLOGIQUE DE L’ÉCREVISSE ASTACUS ASTACUS L. 1758 ASSOCIÉE À L’IMAGERIE (TOMOSCANNER ET ÉCHO-DOPPLER ET AUX TECHNIQUES IMMUNOHISTOCHIMIQUES

Directory of Open Access Journals (Sweden)

BENYAHIA T. M.

2002-07-01

Full Text Available Après avoir souligné, d’une manière concrète, les difficultés de la dissection et le repérage par les méthodes classiques, nous avons essayé dans ce travail d’aborder l’apport de la macroscopie indirecte de l’animal grâce à la radiologie (échographie, tomoscanner, lavement baryté afin de vérifier les donnés anatomiques sur l’écrevisse à pattes rouges, complété par des techniques microscopiques. Dans notre travail, l’adaptation pour l’écrevisse de techniques nouvelles de radiologie (tomoscanner et échographie complétées par les études d’histologie (colorations et immunohistochimie ont permis de se rendre compte des possibilités qu’elles offrent pour l’exploration dynamique et le repérage précis des organes et pour le diagnostic de maladies histopathologiques et ceci sans porter atteinte à l’animal. Le but de cette approche est de mettre au point des moyens d’investigation sur l’animal vivant pour mieux cerner les éventuels états pathologiques touchant surtout ses organes profonds et contribuer ainsi à préserver cette espèce menacée par la pollution des milieux astacicoles et par la sécheresse persistante que connaît le Maroc ces dernières années.

From 'Roentgen' to 'effective dose'. Cooperation of PTR/PTB with Standard Committee Radiology in the development of radiation protection dosimetry

International Nuclear Information System (INIS)

Alberts, W.G.; Dietze, G.; Hohlfeld, K.

1995-01-01

The development of quantities and units in the field of radiation protection dosimetry is demonstrated by some examples. This development is strongly connected with work performed at the PTR/PTB and the work of the ''Normenausschuss Radiologie (NAR) im DIN''. In the following the new radiation protection operational quantities are described which have been recommended by the international commissions ICRU and ICRP for use in area and individual monitoring of external radiation. It is aimed to introduce these quantities in Germany in 1995 - also in legal metrology. (orig.) [de

Radiation protection in interventional radiology; Strahlenschutz in der interventionellen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Adamus, R.; Loose, R.; Galster, M. [Klinikum Nuernberg Nord, Institut fuer Diagnostische und Interventionelle Radiologie, Nuernberg (Germany); Wucherer, M. [Klinikum Nuernberg Nord, Institut fuer Medizinische Physik, Nuernberg (Germany); Uder, M. [Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Institut fuer Radiologie, Erlangen (Germany)

2016-03-15

The application of ionizing radiation in medicine seems to be a safe procedure for patients as well as for occupational exposition to personnel. The developments in interventional radiology with fluoroscopy and dose-intensive interventions require intensified radiation protection. It is recommended that all available tools should be used for this purpose. Besides the options for instruments, x-ray protection at the intervention table must be intensively practiced with lead aprons and mounted lead glass. A special focus on eye protection to prevent cataracts is also recommended. The development of cataracts might no longer be deterministic, as confirmed by new data; therefore, the International Commission on Radiological Protection (ICRP) has lowered the threshold dose value for eyes from 150 mSv/year to 20 mSv/year. Measurements show that the new values can be achieved by applying all X-ray protection measures plus lead-containing eyeglasses. (orig.) [German] Die Anwendung ionisierender Strahlung in der Medizin scheint sowohl fuer Patienten als auch fuer beruflich exponierte Personen sicher zu sein. Die interventionellen Entwicklungen der letzten Jahre mit sehr durchleuchtungs- und dosisintensiven Eingriffen erfordern allerdings eine Intensivierung des Strahlenschutzes. Es empfiehlt sich, die zur Verfuegung stehenden Moeglichkeiten auszuschoepfen. Neben den Geraeteoptionen muss der Strahlenschutz am Eingriffstisch durch Bleilamellenaufstecker und montiertes Bleiglas intensiv betrieben werden. Besonderen Fokus muss auf den Schutz der Augen zur Kataraktvermeidung gelegt werden. Da dessen Ausbildung nach neuen Erkenntnissen moeglicherweise nicht mehr deterministisch zu sehen ist, hat die Internationale Strahlenschutzkommission (IRCP) den Grenzwert von 150 auf 20 Mikrosievert (mSv)/Jahr erniedrigt. Messungen belegen, dass unter Einhaltung aller Strahlenschutzmassnahmen plus Bleiglasbrille dieser einzuhalten ist. (orig.)

Ultrasound elastography: advantages, limitations and artefacts of the different techniques from a study on a phantom.

Science.gov (United States)

Franchi-Abella, S; Elie, C; Correas, J-M

2013-05-01

Ultrasound elastography is a technique currently under development. Its use in clinical practice is complicated because of the wide range of techniques used by the different manufacturers and the parameters proposed to characterise tissues. A comparative analysis on five ultrasound diagnostic systems has been performed on a calibrated elasticity phantom and demonstrated that: (1) all systems tested are reliable for simple qualitative analysis: is a nodule present and is it harder or softer than neighbouring tissues? (2) the deformation or hardness ratios between two regions are usually, however, not proportional to the theoretical ratios and only a binary analysis greater than 1 (harder) and less than 1 (softer) is reliable and could be used as a negative predictive value (NPV) for malignant lesions, as has been suggested by some authors; (3) finally, quantitative analysis using shear wave techniques performed variably, reliable measurements being obtained with only one of the systems. Measurements produced by these different systems must not be compared in clinical practice to monitor a patient and the threshold values proposed in the literature must only be used in an analysis carried out with the same system and same probe. Copyright © 2013 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Radiation protection in the intervenmtional radiology; Strahlenschutz in der interventionellen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Becker, Benjamin V. [Institut fuer Radiobiologie der Bundeswehr, Muenchen (Germany); Ulm Univ. (Germany); Lissek, Friedrich; Waldeck, Stephan [Bundeswehrzentralkrankenhaus Koblenz (Germany). Klinik fuer Radiologie und Neuroradiologie

2017-07-01

Interventional radiology and neuroradiology covers a variety of diagnostic and therapeutic methods. A minimal invasive percutaneous access under imaging guidance is common for all these methods. The legal regulations for quality assurance are reviewed, technical possibilities for dose reduction and the importance of modern radiation protection procedures are discussed.

Study design in clinical radiology; Studiendesign in der klinisch radiologischen Forschung

Energy Technology Data Exchange (ETDEWEB)

Knopp, M.V.; Floemer, F.; Zuna, I.; Kaick, G. van [Deutsches Krebsforschungszentrum (DKFZ) Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie

1998-04-01

Purpose: To review important aspects of study design in clinical radiology and to introduce the reader to the requirements of Good Clinical Practice (GCP). Methods: The European guidelines for GCP, the Declaration of Helsinki, the differentiation into study phases and the authors` own experience in open and sponsored clinical trials are the basis of this analysis. Results: Guideline such as GCP do not limit scientific freedom in research but define high standards for the well-being of patients and volunteers as well as guaranteeing scientific honesty. The benefits of defined data monitoring and the necessity of a prospective statistical concept are frequently underestimated. Conclusion: Correct study design has to be expected in radiology too. High standards guarantee accuracy and honesty of scientific studies. Only this can warrant the value for the patient of radiological diagnostics and therapy. (orig.) [Deutsch] Ziel dieses Artikels ist es, auf wesentliche Aspekte des Studiendesigns in der klinischen Radiologie aufmerksam zu machen und den Leser mit den Anforderungen der `good clinical practice` (GCP) vertraut zumachen. Die Europaeischen Richtlinien zur GCP, die Deklaration von Helsinki, die Einteilung in Studienphasen und eigene Erfahrungen in freien und gesponsorten klinischen Studien sind die Grundlage der Analyse. Richtlinien wie GCP und andere stellen keine Einschraenkung der wissenschaftlichen Freiheit dar, sondern definieren hohe Standards zum Schutz der Patienten und Probanden sowie zur Sicherstellung der wissenschaftlichen Wahrheit. Positive Auswirkungen eines definierten Datenmonitorings sowie die Notwendigkeit einer prospektiven statistischen Konzeption werden haeufig unterschaetzt. Regelrechtes Studiendesign ist auch in der Radiologie zu fordern. Hohe Standards garantieren die Aussagekraft und Wahrheit wissenschaftlicher Untersuchungen. Nur so kann die Wertigkeit radiologischer Diagnostik und Therapie fuer den Patienten sichergestellt werden. (orig.)

Organizing pneumonia: what is it? A conceptual approach and pictorial review.

Science.gov (United States)

Baque-Juston, M; Pellegrin, A; Leroy, S; Marquette, C H; Padovani, B

2014-09-01

Organizing pneumonia (formerly named bronchiolitis obliterans with organizing pneumonia or BOOP) is a clinical, radiological and histological entity that is classified as an Interstitial Lung Disease. The understanding of this family of diseases has seen great progress over the past twenty years. CT presentation of organizing pneumonia is polymorphous but a few patterns have been recently recognized as being more specific to this diagnosis. The aim of this work is to summarize new understandings of the clinical and histological presentation of the disease and to review the most relevant CT features. Copyright © 2014 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Quality assurance in radiation therapy for ensuring the radiation protection of the patient

International Nuclear Information System (INIS)

Arndt, D.; Eichhorn, H.J.

1987-01-01

This issue contains (1) the full text of two pieces of legislation covering the legal requirements for the execution of radiotherapeutic treatments, which came into effect in March 1986; (2) specimen programmes meant to provide guidance on the legally required establishment of test programmes for the routine inspection of radiotherapy equipment in order to demonstrate that it will perform satisfactorily in service; and (3) five papers that have been presented at a workshop organized by 'Gesellschaft fuer Medizinische Radiologie der DDR', held in Bansin, 16-18 May 1985. They deal with the usefulness of the NSD concept in clinical practice including some recommendations aimed to standardize its handling. (author)

Postsurgical telecobalt radiotherapy of mammary carcinomas

International Nuclear Information System (INIS)

Liebl, R.

1980-01-01

The first part of the study is a literature survey. The second part deals with patients and results of radiotherapy of the Klinik and Poliklinik fuer Radiologie der Universitaet Muenchen. The patients with mammary carcinomas, who were treated between 1960 and 1969 were classified according to the TNM classification or they were attributed to stage I or II or III. When the therapy was begun, the mean age of the patients was 55 years, 80% of the patients was between 40 and 60 years old, 45% of the patients were in stage I, 35% in stage II and almost 20% in stage III. (orig./MG) [de

[Evolution of the pelvis and hip throughout history: from primates to modern man].

Science.gov (United States)

Lapègue, F; Jirari, M; Sethoum, S; Faruch, M; Barcelo, C; Moskovitch, G; Ponsot, A; Rabat, M-C; Labarre, D; Vial, J; Chiavassa, H; Baunin, C; Railhac, J-J; Sans, N

2011-06-01

The evolution to a bipedal mode of locomotion was accompanied by a verticalization of the spine and a modification in the shape of the pelvis: horizontal curvature and sagittal rotation. Phylogenesis meets ontogenesis: flat bones in fetuses similar to the monkey, australopithecus features at birth and "human-like" features by 7 or 8years of age. These anatomical modifications explain the characteristics of human bipedalism: stable, economical, with hip and knee extension in the standing position with little lateral motion. Some pathologies induce a regression to a more archaic mode of bipedal locomotion. Copyright © 2011 Elsevier Masson SAS and Éditions françaises de radiologie. All rights reserved.

The battered child syndrome; Die nicht unfallbedingte Verletzung (battered child)

Energy Technology Data Exchange (ETDEWEB)

Sorantin, E.; Lindbichler, F. [Universitaetsklinik fuer Radiologie, Graz (Austria). Abt. fuer Kinderradiologie

2002-03-01

The recognition of a battered child represents a challenge for all groups of adults dealing with children. Radiology plays a special role in this setting. By detection typical injuries, imaging is able to confirm the suspicion of a battered child. Recognition of those injuries on films, taken for other reasons, gives the caretaker an important hint, thus maybe preventing a fatal outcome for the child. One of the most important injury types is represented by the so called ''shakin baby syndrome''. The infant is held by the thorax and shaken. Thus causing a repetitive acceleration-deceleration trauma, which leads to the typical paravertebral rib fractures, intracranial bleeding and eye injuries. After shaking the child is thrown away, with subsequent injuries. The aim of this article is the presentation of an overview regarding the radiology of the battered child. Typical examples will be shown. (orig.) [German] Die Aufdeckung einer Kindesmisshandlung stellt eine grosse Herausforderung fuer alle in der Kinderbetreuung taetigen Berufsgruppen dar. Der Radiologie kommt eine besondere Rolle zu, da sie einerseits durch die Erkennung typischer Verletzungsmuster einen Verdacht bestaetigen, als auch bei ''Zufallsbefunden'' die moeglicherweise fatalen Folgen fuer die betroffenen Kinder verhindern kann. Der typische Verletzungsmechanismus im Rahmen einer Kindesmisshandlung stellt das sog. ''shakin baby syndrome'' dar. Dabei wird der Thorax mit beiden Haenden umfasst und das Kind geschuettelt. Durch dieses repetitive Akzelerations-Dezelerationstrauma entstehen typische Verletzungen mit paravertebralen Rippenfrakturen, ZNS- sowie Retinablutungen. Anschliessend wird das Kind weggeworfen mit entsprechend weiteren Verletzungen. Ziel dieses Artikels ist es, einen Ueberblick ueber die Radiologie der wichtigsten Verletzungen und deren Abklaerung im Rahmen einer Kindesmisshandlung zu geben sowie die Demonstration der Befunde

Radio-toxicological analysis of urine

International Nuclear Information System (INIS)

Jeanmaire, L.; Jammet, H.

1959-01-01

The article is divided into two parts: general and technical. In the general part, a study of the behaviour of radioisotopes in the organism shows the hazards of internal contamination. In addition, the principle of the different methods for the estimation of this contamination is indicated. The second part, which is purely technical, describes some of the methods for urine analysis used in the S.H.A.R.P. radiotoxicology laboratory at the Saclay Nuclear Research Centre. The techniques relate to 239 Pu, 226 Ra, 90 Sr, natural Th, natural U and 233 U. Reprint of a paper published in Annales de Radiologie, Vol. 2, no. 9-10, p. 703-722, 1959 [fr

Imaging features of lower limb malformations above the foot.

Science.gov (United States)

Bergère, A; Amzallag-Bellenger, E; Lefebvre, G; Dieux-Coeslier, A; Mezel, A; Herbaux, B; Boutry, N

2015-09-01

Lower limb malformations are generally isolated or sporadic events. However, they are sometimes associated with other anomalies of the bones and/or viscera in patients with constitutional syndromes or disorders of the skeleton. This paper reviews the main imaging features of these abnormalities, which generally exhibit a broad spectrum. This paper focuses on several different bone malformations: proximal focal femoral deficiency, congenital short femur and femoral duplication for the femur, tibial hemimelia (aplasia/hypoplasia of the tibia) and congenital bowing for the tibia, fibular hemimelia (aplasia/hypoplasia) for the fibula, and aplasia, hypoplasia and congenital dislocation for the patella. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Medical assistance in the management of nuclear power plant accidents. Guide for: medical personnel of emergency preparedness services, doctors of emergency departments, doctors for out-patient or in-patient treatment. 2. rev. ed.

International Nuclear Information System (INIS)

Gumprecht, D.; Haehnel, S.

1995-01-01

The guide explains the medical tasks and activities in the context of the emergency preparedness programmes and provisions established by the Laender. The medical expert for radiation injuries is a particularly important function in the radiologial accident management services. The provisions for medical care have been determined on the basis of knowledge drawn among other sources from the German Nuclear Power Plant Risk Study, Phase B. In addition, the guide's provisions are based on international knowledge about the consequences of enhanced radiation exposure, and the medical tasks and the required organisational infrastructure have been determined accordingly. A further source of reference for planning the activities are the data accumulated during emergency preparedness training activities in the various Laender. (orig./MG). 3 figs., 5 tabs [de

Contribution of renal X-ray examinations to the radiation exposure to the population

Energy Technology Data Exchange (ETDEWEB)

Radtke, I [Staedtisches Klinikum Berlin-Buch (German Democratic Republic). Roentgendiagnostisches Zentrum; Angerstein, W [Forschungsinstitut fuer Tuberkulose und Lungenkrankheiten, Berlin (German Democratic Republic); Koenig, W; Menzel, B [Staatliches Amt fuer Atomsicherheit und Strahlenschutz, Berlin (German Democratic Republic)

1978-04-02

Measured values of the radiation exposure of patients by urography published in the literature are summarized and critically reviewed. The gonad dose to men, women and children has been determined in 6 series of measurements performed according to the recommendations of the Gesellschaft fuer Medizinische Radiologie. Altogether, the determination of the gonad dose based on 927 individual measurements, 230 of them intravaginally, on 226 patients. The surface dose has been determined from 335 measurements. With exact collimation and shielding values of 250 mR for men and 650 mR for women have been obtained as the most probable ones. For 350,000 urographs equally distributed to both sexes and performed under correct working conditions an average per capita dose of 9.2 mR would result.

Pocket atlas of radiographic anatomy. 2. rev. ed.; Taschenatlas der Roentgenanatomie

Energy Technology Data Exchange (ETDEWEB)

Moeller, T.B.; Reif, E. [Caritas-Krankenhaus, Dillingen (Germany)

1998-07-01

This pocket atlas is the second, revised German edition of the pocket atlas of radiographic anatomy. All anatomic structures of clinical relevance are reproduced according to the split page concept, showing the radiographs, the accompanying drawings and the clinical terminology. (orig./CB) [German] Diese 2. ueberarbeitete Auflage des Taschenatlas der Roentgenanatomie und zeichnet sich aus durch folgende Aspekte: - Hoher Informationsgehalt: alle gaengigen Standard- und Spezialeinstellungen der konventionellen Radiologie einschliesslich aller Kontrastmitteluntersuchungen werden beschrieben. - Praezise im Detail: alle klinisch relevanten anatomischen Strukturen werden in einer dem Roentgenbild direkt gegenuebergestellten Zeichnung wiedergegeben und benannt. Der Benennung liegt die klinisch gebraeuchliche Terminologie zugrunde. - Immer griffbereit, handlich und uebersichtlich: das praktische Taschenbuchformat macht es leicht, das Buch immer dabeizuhaben. Der einfache Aufbau erspart muehsames Suchen in Inhalts- oder Sachverzeichnissen. (orig.)

Advantages of gadobenate dimeglumine-enhanced MR cholangiography in the diagnosis of post-liver transplant bile leakage.

Science.gov (United States)

Fontarensky, M; Montoriol, P-F; Buc, E; Poincloux, L; Petitcolin, V; Da Ines, D

2013-04-01

To assess the value of magnetic resonance cholangiography with gadobenate dimeglumine (Gd-BOPTA) where there is a suspicion of bile leakage in the post-liver transplant patient. Eight patients who had undergone a liver transplant underwent 14 MR cholangiograms, five of whom presented bile leakage while the other three had no biliary system complications. The results were compared to conventional bile duct opacification (by endoscopy or t-tube cholangiogram). The analysis covered whether there was opacification of the common bile duct and intrahepatic bile ducts on T1-weighted sequences after an injection of Gd-BOPTA on delayed biliary excretion phase sequences that were carried out on average 74 min after the injection. Enhancing perihepatic collections were also taken into account. Opacification of the bile ducts on delayed-phase MR cholangiogram sequences was always seen in the absence of bile leakage, and was never found when leakage was present. Enhancing perihepatic collections pointed to bile leakage every time. Gd-BOPTA-enhanced MR cholangiography is a simple and non-invasive technique for detecting bile leakage in the post-liver transplant patient. Copyright © 2013 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Integrative teaching in Radiology. A survey; Integrative Lehre in der Radiologie. Eine Bestandsaufnahme

Energy Technology Data Exchange (ETDEWEB)

Dettmer, S.; Weidemann, J.; Wacker, F. [Hannover Medical School, Hannover (Germany). Inst. for Diagnostic and Interventional Radiology; Fischer, V. [Hannover Medical School, Hannover (Germany). Office for Medical Education

2015-04-15

To survey integrative teaching in radiology at German universities. A questionnaire about radiological education was sent electronically to all 37 chairpersons of university radiology departments in Germany. The questions included the course type, teaching methods, concept, perception, and advantages and disadvantages of integrative teaching. Statistical analysis was performed with nonparametric statistics and chi-square test. The survey was considered representative with a return rate of 68%. Integrative teaching is established at 4/5 of all departments. Integrative teaching is well accepted with an acceptance rate that is significantly higher in so-called 'Modellstudiengaengen' (model courses of study) (100%) compared to conventional courses of study (72%). The advantages of integrative teaching include linking of content (92%) and preparation for interdisciplinary work (76%). The disadvantages include high effort (75%) and time (67%) for organization. Furthermore, there is a risk that basic radiological facts and knowledge cannot be conveyed and that the visibility of radiology as an independent discipline is lost. Conventional radiological teaching has a similarly high acceptance (84%) compared to integrative courses (76%). Integrative teaching has a high acceptance among chairpersons in radiology in Germany despite the greater effort. A good interdisciplinary collaboration is essential for integrative teaching and at the same time this can be conveyed to the students. However, the visibility of radiology as a discipline and the possibility to cover basic radiological content must be ensured. Therefore, both conventional courses and integrative teaching seems reasonable, especially in cross-disciplinary subjects such as radiology.

Diagnostic imaging in pregraduate integrated curricula; Radiologie in einem praegraduellen problembasiert-integrierten Medizincurriculum

Energy Technology Data Exchange (ETDEWEB)

Kainberger, F.; Kletter, K. [Universitaetsklinik fuer Radiodiagnostik, Medizinische Univ. Wien (Austria)

2007-11-15

Pregraduate medical curricula are currently undergoing a reform process that is moving away from a traditional discipline-related structure and towards problem-based integrated forms of teaching. Imaging sciences, with their inherently technical advances, are specifically influenced by the effects of paradigm shifts in medical education. The teaching of diagnostic radiology should be based on the definition of three core competencies: in vivo visualization of normal and abnormal morphology and function, diagnostic reasoning, and interventional treatment. On the basis of these goals, adequate teaching methods and e-learning tools should be implemented by focusing on case-based teaching. Teaching materials used in the fields of normal anatomy, pathology, and clinical diagnosis may help diagnostic radiology to play a central role in modern pregraduate curricula. (orig.)

Mountain biking. Breezy ups and traumatic downs; Mountainbiking. Luftige Hoehen und traumatische Tiefen

Energy Technology Data Exchange (ETDEWEB)

Schueller, G. [Medizinische Universitaet Wien, Univ.-Klinik fuer Radiodiagnostik, Wien (Austria)

2010-05-15

For more than two decades the popularity of mountain biking as a national pastime as well as a competitive sport has been undiminished. However, its related risks are not monitored as closely as those, for example, of skiing. The injuries caused by mountain biking are specific and cannot be compared with those caused by other cycling sports. This is due not only to the characteristics of the terrain but also to the readiness to assume a higher risk compared to cycle racing. The particular value of radiology is in the acute trauma setting. Most often musculoskeletal lesions must be examined and digital radiography and MRI are the most useful techniques. Severe trauma of the cranium, face, spine, thorax and abdomen are primarily evaluated with CT, particularly in dedicated trauma centers. Therefore, radiology can play a role in the rapid diagnosis and optimal treatment of the trauma-related injuries of mountain biking. Thus, the unnecessarily high economical damage associated with mountain biking can be avoided. (orig.) [German] Mountainbiking erfreut sich seit mehr als 2 Jahrzehnten sowohl im Breiten- als auch Wettkampfsport einer ungebrochenen Popularitaet. Die assoziierten Risiken werden allerdings nicht mit derselben Aufmerksamkeit beobachtet wie etwa jene des Skisports. Die Verletzungen beim Mountainbiking sind spezifisch und nicht mit den Verletzungen vergleichbar, die bei anderen Radsportarten entstehen. Dies ist z. T. durch die Besonderheiten des Terrains und z. T. durch eine im Vergleich zum Rennradfahren hoehere Risikobereitschaft zu erklaeren. Die Radiologie hat ihren Stellenwert besonders in der Akutdiagnostik. Hier beschaeftigt sie sich v. a. mit muskuloskelettalen Verletzungen und setzt in erster Linie auf die digitale Projektionsradiographie und die MRT. Zur Evaluierung schwerer Verletzungen des Kopfs, der Wirbelsaeule, des Thorax und des Abdomens wird die CT bevorzugt, insbesondere in dezidierten Traumazentren. Damit kann die Radiologie ihren Teil

Contribution of renal X-ray examinations to the radiation exposure to the population

International Nuclear Information System (INIS)

Radtke, I.; Koenig, W.; Menzel, B.

1978-01-01

Measured values of the radiation exposure of patients by urography published in the literature are summarized and critically reviewed. The gonad dose to men, women and children has been determined in 6 series of measurements performed according to the recommendations of the Gesellschaft fuer Medizinische Radiologie. Altogether, the determination of the gonad dose based on 927 individual measurements, 230 of them intravaginally, on 226 patients. The surface dose has been determined from 335 measurements. With exact collimation and shielding values of 250 mR for men and 650 mR for women have been obtained as the most probable ones. For 350,000 urographs equally distributed to both sexes and performed under correct working conditions an average per capita dose of 9.2 mR would result. (author)

Functional morphological imaging of autism spectrum disorders: current position and theories proposed.

Science.gov (United States)

Lauvin, M-A; Martineau, J; Destrieux, C; Andersson, F; Bonnet-Brilhault, F; Gomot, M; El-Hage, W; Cottier, J-P

2012-03-01

Autism is a pervasive disorder of childhood development. Polymorphous clinical profiles combining various degrees of communication and social interaction with restricted and stereotyped behaviour are grouped under the heading of 'autism spectrum disorders' (ASD). Many teams are trying to pick out the underlying cerebral abnormalities in order to understand the neuronal networks involved in relationships with others. Here we review the morphological, spectroscopic and functional abnormalities in the amygdala-hippocampal circuit, the caudate nuclei, the cerebellum, and the frontotemporal regions, which have been described in subjects with ASD. White matter abnormalities have also been described in diffusion tensor imaging, leading to suspected damage to the subjacent neural networks, such as mirror neurones or the social brain. Copyright © 2012 Éditions Françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

French days of radiology (J.F.R.) 2005; Journees francaises de radiologie (JFR) 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Five parts are presented, the nuclear safety authority informs the radiologists on the evolution of the regulation in radiation protection and its practical application; statements of medical and dental radiodiagnosis equipments; licensing for use of radiodiagnosis installation; to use the diagnosis reference levels in radiology to optimize the practices; radiation protection in interventional radiology. (N.C.)

Radiation induced DNA double-strand breaks in radiology; Strahleninduzierte DNA-Doppelstrangbrueche in der Radiologie

Energy Technology Data Exchange (ETDEWEB)

Kuefner, M.A. [Dornbirn Hospital (Austria). Dept. of Radiology; Brand, M.; Engert, C.; Uder, M. [Erlangen University Hospital (Germany). Dept. of Radiology; Schwab, S.A. [Radiologis, Oberasbach (Germany)

2015-10-15

Shortly after the discovery of X-rays, their damaging effect on biological tissues was observed. The determination of radiation exposure in diagnostic and interventional radiology is usually based on physical measurements or mathematical algorithms with standardized dose simulations. γ-H2AX immunofluorescence microscopy is a reliable and sensitive method for the quantification of radiation induced DNA double-strand breaks (DSB) in blood lymphocytes. The detectable amount of these DNA damages correlates well with the dose received. However, the biological radiation damage depends not only on dose but also on other individual factors like radiation sensitivity and DNA repair capacity. Iodinated contrast agents can enhance the x-ray induced DNA damage level. After their induction DSB are quickly repaired. A protective effect of antioxidants has been postulated in experimental studies. This review explains the principle of the γ-H2AX technique and provides an overview on studies evaluating DSB in radiologic examinations.

Radio-contaminated patients intake at the Nancy teaching hospital: study of the resources and implication possibilities of radiation protection referent personnel

International Nuclear Information System (INIS)

Guionnet, Christophe

2011-01-01

In the events implying radioactive materials, the organization of care in the health facilities requires both the implementation of some skills, which go beyond the usual trade and professional duties of each of the partners, and the identification of the departments and referent staff that are likely to be most affected by these risks. This study, which was conducted within the Radiologie and Medecine Nucleaire Departments of the Centre Hospitalier Universitaire de Nancy, highlights the existence of reference material as means of detecting radiation, the conditions under which they will be developed remain to be defined. Human means can be called for for missions of information, detection, patient screening and decontamination. Volunteering persons, with competences in radiation protection (Personnes Competentes en Radioprotection), and radiographers can lead to the realization of their missions, after an practical training. (author) [fr

Spontaneous soft tissue hematomas.

Science.gov (United States)

Dohan, A; Darnige, L; Sapoval, M; Pellerin, O

2015-01-01

Spontaneous muscle hematomas are a common and serious complication of anticoagulant treatment. The incidence of this event has increased along with the rise in the number of patients receiving anticoagulants. Radiological management is both diagnostic and interventional. Computed tomography angiography (CTA) is the main tool for the detection of hemorrhage to obtain a positive, topographic diagnosis and determine the severity. Detection of an active leak of contrast material during the arterial or venous phase is an indication for the use of arterial embolization. In addition, the interventional radiological procedure can be planned with CTA. Arterial embolization of the pedicles that are the source of the bleeding is an effective technique. The rate of technical and clinical success is 90% and 86%, respectively. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Temporomandibular Joint: MRT Diagnostics; Temporomandibulargelenk: MRT-Diagnostik

Energy Technology Data Exchange (ETDEWEB)

Kress, B. [Universitaetsklinikum Heidelberg (Germany). Abteilung Neuroradiologie; Universitaetsklinikum Heidelberg (Germany). Neurologische Klinik; Schmitter, M. [Universitaetsklinikum Heidelberg (Germany). Poliklinik fuer zahnaerztliche Prothetik; Universitaetsklinikum Heidelberg (Germany). Abteilung Neuroradiologie

2005-09-01

MRI of the temporomandibular joint (TMJ) requires 1.5 T. The radiologist must be familiar with the anatomy and pathology of the TMJ. This review gives a description of MRI protocols for the TMJ, and MRI anatomy and pathology of the TMJ (open and closed mouth) by means of MR images and drawings. Diagnosing of the TMJ related diseases depends on standardized clinical and MR examinations. Therefore close interdisciplinary cooperation between dentist and radiologist is necessary. (orig.) [German] Magnetresonanztomographie bei Kiefergelenkbeschwerden erfordert neben guter technischer Ausstattung Kenntnisse der Anatomie und Pathologie des Kiefergelenks. Diese Uebersicht stellt neben MRT-Protokollen die Anatomie und die pathologischen Befunde des Kiefergelenks bei geoeffnetem und geschlossenem Mund anhand von Abbildungen und Graphiken systematisch dar. Bildgebende Diagnostik des Kiefergelenks gruendet sich auf eine standardisierte klinische und magnetresonanztomographische Untersuchung und erfordert eine enge interdisziplinaere Kooperation zwischen Zahnmedizin und Radiologie. (orig.)

Structured diagnostic imaging in patients with multiple trauma; Strukturierte radiologische Diagnostik beim Polytrauma

Energy Technology Data Exchange (ETDEWEB)

Linsenmaier, U.; Rieger, J.; Rock, C.; Pfeifer, K.J.; Reiser, M. [Institut fuer Klinische Radiologie, Klinikum der Universitaet Muenchen, Innenstadt (Germany); Kanz, K.G. [Chirurgische Klinik, Klinikum der Universitaet Muenchen, Innenstadt (Germany)

2002-07-01

ein interdisziplinaeres Behandlungsteam, bestehend aus Anaesthesie, Radiologie und Unfallchirurgie. Die Radiologie ihrerseits bedarf eines standardisierten apparativen, personellen, und logistischen Konzeptes zur Durchfuehrung der bildgebenden Diagnostik polytraumatisierter Patienten bei gleichbeliebender Qualitaet im 24-h-Betrieb.Ergebnisse. Die vorliegende Arbeit beschreibt anerkannte Kriterien fuer die Einleitung einer Schockraumbehandlung, Methoden der Traumadokumentation und interdisziplinaere Algorithmen, die die Diagnostik und Therapie in der fruehen klinischen Behandlungsphase nach standardisierten Bedingungen koordinieren.Die Radiologische Diagnostik umfasste die Basisdiagnostik mit radiologischer ABC-Regel, radiologischem Follow-up und die Organdiagnostik mittels Computertomographie (CT). Die Einfuehrung eines Schemas zum radiologischen Traumascoring ermoeglicht eine Qualitaetskontrolle von Diagnostik und Therapie.Schlussfolgerungen. Strukturierte radiologische Diagnostik fuehrt zu einer Standardisierung des Vorgehens bei gleichbleibender Qualitaet. (orig.)

Transcatheter arterial embolization for acute nonvariceal upper gastrointestinal bleeding: Indications, techniques and outcomes.

Science.gov (United States)

Loffroy, R; Favelier, S; Pottecher, P; Estivalet, L; Genson, P Y; Gehin, S; Cercueil, J P; Krausé, D

2015-01-01

Over the past three decades, transcatheter arterial embolization has become the first-line therapy for the management of acute nonvariceal upper gastrointestinal bleeding that is refractory to endoscopic hemostasis. Advances in catheter-based techniques and newer embolic agents, as well as recognition of the effectiveness of minimally invasive treatment options, have expanded the role of interventional radiology in the treatment of bleeding for a variety of indications. Transcatheter arterial embolization is a fast, safe, and effective minimally invasive alternative to surgery, when endoscopic treatment fails to control acute bleeding from the upper gastrointestinal tract. This article describes the role of arterial embolization in the management of acute nonvariceal upper gastrointestinal bleeding and summarizes the literature evidence on the outcomes of endovascular therapy in such a setting. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Digitised and intervention radiology in cardiovascular disorders. Digitale und interventionelle Radiologie bei Herz- und Gefaesskrankheiten

Energy Technology Data Exchange (ETDEWEB)

Richter, K. (Herz-Kreislaufklinik, Berlin-Buch (Germany)) (ed.)

1992-01-01

This volume offers a selection of scientific assessments and data contributed by numerous experts that were based on recent experience in various fields, which include in particular: contrast echocardiography, quantitative characterisation of myocardial tissue, filmless cardangiography, quantitative DSA, digitised luminescence radiology of the thorax, on-line computer-aided cardiac evaluations, automatic recognition of image characteristics, ROC analysis, trends in PACS development, contrast media including their influences on microcirculation, recent developments and trends of non-surgical angioplasty, newly devised stents, atherectomy, the use of excimer lasers in coronaries and other vessels and of microcoils in neuroradiology. (MG).

Measuring methods and classification in the muscoskeletal radiology; Messverfahren und Klassifikationen in der muskuloskelettalen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Waldt, Simone; Eiber, Matthias; Woertler, Klaus [Klinikum rechts der Isar der Technischen Univ. Muenchen (TUM), Muenchen (Germany). Inst. fuer Radiologie

2011-07-01

The book on measuring methods and classification in the musculoskeletal radiology covers the following topics: legs; hip joint; knee joint; foot; shoulder joint; elbow joint; wrist joint; spinal column; craniocervical transition region and cervical spine; muscular-skeletal carcinomas; osteoporosis; arthrosis; articular cartilage; hemophilia; rheumatic arthritis; muscular injuries; skeleton age.

``Battered child`` syndrome; Das ``Battered-Child``-Syndrom

Energy Technology Data Exchange (ETDEWEB)

Elsner, K.; Merk, J.; Sokiranski, R. [Ulm Univ. (Germany). Abt. Diagnostische Radiologie

1997-10-01

Synonyms for the `battered child` syndrome (BCS) are terms describing the physical and body aspects of the process, such as `child abuse`, or `non-accidental injury`. These are to be distinguished from the psychic aspects and abuse, emotional and bodily neglect, and sexual abuse. Most cases are one or another combination of these aspects. Radiology is the essential method for giving proof of such abuses, identifying the signs of maltreatment in a medical record, or for disproving suspected abuse. (orig./AJ) [Deutsch] Als Synonym fuer das `Battered-Child`-Syndrom (BCS) stehen die Begriffe der koerperlichen-/physikalischen-Kindesmisshandlung, im angelsaechsischen Sprachraum die Begriffe `Child Abuse` und `Nonaccidental Injury`. Vom Syndrom abzugrenzen sind die seelische Misshandlung, die seelische und koerperliche Vernachlaessigung, und der sexuelle Missbrauch. Kombinationsformen sind nicht selten. Bei der Diagnostik des Syndroms spielt die Radiologie eine entscheidende Rolle. So hilft der Einsatz adaequater Untersuchungsmethoden, den Tatbestand der Misshandlung zu identifizieren und zu dokumentieren, aber auch einen Verdacht zu widerlegen. (orig./AJ)

Teleradiology and PACS - strategy of the Innsbruck University Hospital; Teleradiologie und PACS - das Konzept des Universitaetsklinikums Innsbruck

Energy Technology Data Exchange (ETDEWEB)

Vogl, R. [HITT - Health Information Technologies Tirol, Innsbruck (Austria)

2005-08-01

Systems for management of digital imaging data are very important and widespread at the Innsbruck University Hospital and constitute a central component of the IT strategies followed by the hospital operating company TILAK (Tyrolean public hospitals). The particular goal is to integrate all imaging data into the electronic medical records and make these available online to each of the approx. 2500 clinic workstations and ensure electronic data exchange with other healthcare services. Teleradiology connections have been established at the University Clinic for Radiology since 1995; these have been continually expanded and linked to the central PACS. An eHealth web portal was recently established to facilitate transfer of images and findings from TILAK hospitals to other healthcare organizations. Registered users can be cleared for a limited time to access all radiological imaging data via this web portal. (orig.) [German] Die Systeme zum digitalen Bilddatenmanagement haben grosse Bedeutung und weite Verbreitung an der Universitaetsklinik Innsbruck und sind zentraler Bestandteil der IT-Strategie der Krankenhausbetreibergesellschaft TILAK (Tiroler Landeskrankenanstalten). Ziel dabei ist es insbesondere, saemtliche Bilddaten in die elektronische Krankengeschichte zu integrieren und von jedem der ca. 2500 klinischen Arbeitsplaetze aus online zugreifbar zu machen sowie den elektronischen Datenaustausch mit anderen Gesundheitsdiensteanbietern zu gewaehrleisten. Seit 1995 bestehen Teleradiologieverbindungen der Universitaetsklinik fuer Radiologie; diese wurden laufend ausgebaut und die Einbindung in das zentrale PACS hergestellt. Zur Kommunikation von Bild- und Befunddaten aus den Krankenhaeusern der TILAK an andere Gesundheitseinrichtungen wurde kuerzlich ein eHealth WebPortal geschaffen, ueber das saemtliche radiologischen Bilddaten durch zeitbefristete Freigaben fuer registrierte Benutzer zugaenglich gemacht werden koennen. (orig.)

Endovascular interventions for multiple trauma; Endovaskulaere Interventionen beim Polytrauma

Energy Technology Data Exchange (ETDEWEB)

Kinstner, C.; Funovics, M. [Klinik fuer Radiologie und Nuklearmedizin, Medizinische Universitaet Wien, Klinische Abteilung fuer Kardiovaskulaere und Interventionelle Radiologie, Wien (Austria)

2014-09-15

In recent years interventional radiology has significantly changed the management of injured patients with multiple trauma. Currently nearly all vessels can be reached within a reasonably short time with the help of specially preshaped catheters and guide wires to achieve bleeding control of arterial und venous bleeding. Whereas bleeding control formerly required extensive open surgery, current interventional methods allow temporary vessel occlusion (occlusion balloons), permanent embolization and stenting. In injured patients with multiple trauma preinterventional procedural planning is performed with the help of multidetector computed tomography whenever possible. Interventional radiology not only allows minimization of therapeutic trauma but also a considerably shorter treatment time. Interventional bleeding control has developed into a standard method in the management of vascular trauma of the chest and abdomen as well as in vascular injuries of the upper and lower extremities when open surgical access is associated with increased risk. Additionally, pelvic trauma, vascular trauma of the superior thoracic aperture and parenchymal arterial lacerations of organs that can be at least partially preserved are primarily managed by interventional methods. In an interdisciplinary setting interventional radiology provides a safe and efficient means of rapid bleeding control in nearly all vascular territories in addition to open surgical access. (orig.) [German] Innerhalb der letzten Jahre hat die interventionelle Radiologie das Management des Polytraumas massiv beeinflusst. Um eine Kontrolle einer arteriellen oder venoesen Blutung zu erreichen, koennen heute nahezu alle Gefaesse mithilfe spezieller Katheter und Draehte in kuerzester Zeit erreicht werden. Waehrend frueher eine Blutung nur in einem aufwendigen operativen Eingriff kontrolliert werden konnte, stehen heute Methoden zur Verfuegung, die Gefaesse temporaer zu okkludieren (Okklusionsballon), zu embolisieren

Medical radiology terminology. French - English - German. Woerterbuch der physikalisch-technischen Begriffe der medizinischen Radiologie. Franzoesisch - Englisch - Deutsch

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

Standardization achievements in the field of radiology induced the IEC to compile the terminology used in its safety and application standards and present it in publication 788 (1984 issue), entitled 'Medical radiology terminology'. The objective pursued is to foster the use of standard terminology in the radiology standards. The value of publication 788 lies in the fact that it presents definitions of terms used in the French and English versions of IEC standards in the field of radiology, and thus facilitates adequate translation of these terms into other languages. In the glossary in hand, German-language definitions have been adopted from the DIN standards in cases where the French or English versions of definitions are identical with the German wording or meaning. The numbers of DIN standards or sections are then given without brackets, ahead of the text of the definition. In cases where correspondance of the various texts is not so good, or reference should be made to a term in a DIN standard, the numbers are given in brackets.

Arthroplasty of the rheumatoid hand. Pre- and postoperative imaging with special consideration of biomechanical and pathobiomechanical aspects and its radiological evaluation; Arthroplastik der rheumatischen Hand. Prae- und postoperative Bildgebung mit besonderer Beruecksichtigung der Biomechanik und Pathobiomechanik und ihrer Evaluation am Roentgenbild

Energy Technology Data Exchange (ETDEWEB)

Sommer, O.J. [Krankenhaus Hietzing mit Neurologischem Zentrum Rosenhuegel, Zentralroentgeninstitut mit Schnittbildzentrum, Wien (Austria); Sekyra, K. [Medizinische Universitaet Innsbruck/Oesterreich, Klinik fuer Orthopaedie (Austria)

2006-09-15

Radiology plays a key role when the indications for arthroplasties of the hand and finger joints are determined and for the postoperative follow-up. On the one hand, the degree of inflammatory changes in all affected compartments is to be evaluated and graded; on the other hand, conventional radiograms allow for a first assessment of possible joint instability and impaired biomechanics. Both aspects influence the choice of the proper surgical therapeutic strategy. Osteolysis, deformity, fracture, prosthesis loosening or failure, heterotopic ossification, and foreign body-associated formation of granulation tissue are complications which can be detected on follow-up radiographs early on. (orig.) [German] Bei der Indikationsstellung und Verlaufskontrolle von Arthroplastien der Hand kommt der Radiologie eine wesentliche Rolle zu. Einerseits ist das Ausmass der entzuendlichen Veraenderungen in allen Kompartimenten umfassend zu beurteilen und graduieren, andererseits lassen sich bereits im konventionellen Roentgenbild Rueckschluesse auf etwaige Instabilitaet oder gestoerte Biomechanik ziehen. Beide Aussagen wirken sich auf die operative Therapieentscheidung massgeblich aus. Osteolyse, Deformitaet, Fraktur, Implantatlockerung oder -versagen, heterotope Knochenneubildung und fremdkoerperassoziierte Granulationsgewebebildung sind Komplikationen, die in den postoperativen Verlaufskontrollen fruehzeitig erfasst werden koennen. (orig.)

Clinical use of MR imaging-guided interventions; Klinischer Einsatz der interventionellen MRT (iMRT)

Energy Technology Data Exchange (ETDEWEB)

Kahn, T.; Schulz, T.; Moche, M.; Prothmann, S.; Schneider, J.P. [Klinik und Poliklinik fuer Diagnostische Radiologie, Univ. Leipzig (Germany)

2003-07-01

The integration of diagnostic and therapeutic procedures by MRI is based on the combination of excellent morphologic and functional imaging. The spectrum of MR-guided interventions includes biopsies, thermal ablation procedures, vascular applications, and intraoperative MRI. In all these applications, different scientific groups have obtained convincing results in basic developments as well as in clinical use. Interventional MRI (iMRI) is expected to attain an important role in interventional radiology, minimal invasive therapy, and monitoring of surgical procedures. (orig.) [German] Die Integration diagnostischer und therapeutischer Massnahmen durch die MRT basiert auf der Kombination von exzellenter morphologischer und funktioneller Bildgebung. Das Spektrum MR-gefuehrter Eingriffe reicht von Biopsien, thermischen Therapieverfahren, vaskulaeren Applikationen bis hin zum intraoperativen Einsatz der MRT. Auf allen Gebieten konnten von verschiedenen Arbeitsgruppen ueberzeugende Ergebnisse sowohl im Bereich der Grundlagenentwicklung als auch bei klinischen Anwendungen vorgelegt werden. Es ist davon auszugehen, dass die interventionelle MRT einen hohen Stellenwert im Bereich der interventionellen Radiologie, der minimal-invasiven Therapie und der Ueberwachung von operativen Eingriffen erlangen wird. (orig.)

[Value of CT lymphangiography in the detection of lymphatic leakage: a report of nine cases].

Science.gov (United States)

Safar, K; Aouaifia, A; Oudjit, A; Le Pimpec-Barthes, F; Riquet, M; Legmann, P

2011-01-01

To demonstrate the value of CT lymphangiography to detect lymphatic leakage, especially at the thoracic level, prior to therapeutic intervention. Between 2004 and 2008, nine patients underwent lymphangiography, followed by CT for the evaluation of intractable lymphatic leakage in spite of optimal medical management. Patients included seven females and two males, with age ranging between 25 and 58 years. Lymphangiography was performed after unilateral or bilateral foot injection(s) of Lipiodol ultrafluid followed by standard radiographs of the chest and abdomen and CT of the chest, abdomen and pelvis. The images were reviewed by two experienced radiologists. Lipiodol leakage was observed in six patients, while three patients showed evidence of lymphangiectasia of the abdominal and/or thoracic lymphatics. Spontaneous resolution of leakage after lymphangiography occurred in three cases. CT lymphangiography allows direct evaluation of lymphatics, from pelvis to chest, in order to detect the site of leakage at the origin of a chylous effusion and assist in its management. Copyright © 2010 Elsevier Masson SAS and Éditions françaises de radiologie. All rights reserved.

Evaluation of radiation exposure in interventional radiology (IR) using active personal dosimeters (APD); Evaluierung der Strahlenexposition in der Interventionellen Radiologie (IR) mit Hilfe von Aktiv-Personen-Dosimetern (APD)

Energy Technology Data Exchange (ETDEWEB)

Neugschwandtner, K. [KH Hietzing mit NZ Rosenhuegel, Wien (Austria). Inst. fuer Krankenhausphysik; TU Wien (Austria). Atominstitut; Freund, R. [KH Hietzing mit NZ Rosenhuegel, Wien (Austria). Inst. fuer Krankenhausphysik; Mertikian, G. [KH Hietzing mit NZ Rosenhuegel, Wien (Austria). Inst. fuer Radiologie; Poljanc, K. [TU Wien (Austria). Atominstitut; Ibi, B. [KA Rudolfstiftung, Wien (Austria). Stabstelle Medizinphysik

2015-07-01

Increased awareness of high personal dose exposure of medical staff in interventional radiology (IR) demands an assessment of radiation protection procedures. Mandatory dose monitoring systems do not allow to relate dose to specific actions of the staff as they just accumulate a total dose per month. Doses of head and limbs are expected to be high as those body parts which are not protected by the lead apron. We decided to use a measuring system by Unfors, RaySafe i2 which is built for real- time- dosimetry of scattered radiation in pulsed X-ray fields. An increased dose of the body side closer to the X-ray source (left body side) was detected. This is due to the position and the posture of the radiologist during intervention. Separating the phases of digital subtraction angiography (DSA) from those of fluoroscopy allowed not only to list the separate accumulated doses, but showed as well a big difference in dose rate. The measurements revealed the need of an improvement of common radiation protection, especially while DSA.

Textbook on X-ray diagnostics. Substantiated by Marianne Zimmer-Brossy. 6. new rev. ed.; Lehrbuch der roentgendiagnostischen Einstelltechnik. Begruendet von Marianne Zimmer-Brossy

Energy Technology Data Exchange (ETDEWEB)

Becht, Stefanie [Unfallkrankenhaus Berlin (Germany). Inst. fuer Radiologie; Bittner, Roland C. [Helios Klinikum Emil von Behring, Berlin (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie; Ohmstede, Anke [Klinikum Oldenburg gGmbH (Germany). MTA-Schule; Pfeiffer, Andreas [Klinikum Stuttgart (Germany). Servicecenter Informationstechnik; Rossdeutscher, Reinhard [Johanniter-Krankenhaus im Flaeming, Treuenbrietzen (Germany). Abt. fuer Roentgendiagnostik

2008-07-01

The standard textbook on x-ray diagnostics has been revised by the MTRA team and radiologists: The book covers the following topics: General information: the profession of a radiologist, the x-ray department, radiation protection, quality assurance, basic physics, x-ray imaging, analog and digital image processing, archives, image interpretation. Skeleton diagnostics; Inner organs (thorax organs, neck, abdomen, gastrointestinal tract, colon, gall bladder and biliary tract): Special x-ray diagnostic methods: x-ray diagnostic of the female and male chest, x-ray diagnostics of bone joints (arthrography, and contrast media), x-ray diagnostics of the urinary-genital system, x-ray diagnostics of cavities and syrinx, x-ray diagnostics of arteries (arteriography, angiography), percutaneous transluminal angioplasty, x-ray diagnostics of veins (phlebography), x-ray diagnostics of lymphatic vessels and lymph nodes, x-ray diagnostics of spinal cord (myelography); Specific imaging methods: computerized tomography. [German] Ein erfahrenes Team aus MTRA und Radiologen ueberarbeitete und verbesserte das bewaehrte Standardwerk grundlegend. Detailliert, praezise und ausfuehrlich erlaeutert die 6. Neuauflage technische und physikalische Grundlagen, Strahlenschutz, alle wichtigen Einstellungen (vom Skelettsystem bis hin zur Mammadiagnostik) und aktuelle Leitlinien. Nah an der Praxis sind insbesondere die Hinweise zur Patientenvorbereitung und -lagerung, Qualitaetskriterien und Bildmerkmale sowie viele Tipps und Checklisten. Alle Einstellbilder sowie die Mehrzahl der radiologischen Aufnahmen sind erneuert. Die Kapitel zur digitalen Radiographie und den Grundlagen der MRT sind neu, die Kapitel zu CT-Protokollen und zur interventionellen Radiologie erweitert. Ein ausfuehrliches Glossar rundet das Buch ab. Insgesamt ein wertvolles und unverzichtbares Standardwerk fuer Ausbildung und Beruf. (orig.)

The Nuclear Safety Authority: statement and perspectives; L'Autorite de Surete Nucleaire: constats et perspectives en radiologie

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

This Power Point presentation gives the distribution of exposure sources among different sectors and origins, the level of medical exposures in the USA in 1983 and 2006, an assessment of the evolution of patient exposure in the world, the number of scanners in some countries and the corresponding average dose per inhabitant, the importance of the use of a scanner in diagnosis examinations. It comments the increase of the average efficient dose per inhabitant in radiology, shows that a major part of it is due to scanners. Other data are presented regarding patient age and gender. The contributions of radiography and scanner are compared for several western countries. Then the author addresses several issues: the value of the actual dose, and the associated risks. He outlines how to control the observed dose increase

Dose monitoring in radiology departments. Status quo and future perspectives; Dosismonitoring in der Radiologie. Status quo und Zukunftsperspektiven

Energy Technology Data Exchange (ETDEWEB)

Boos, J. [Harvard Medical School, Boston, MA (United States). Dept. of Radiology; Duesseldorf Univ. (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie; Meineke, A. [Cerner Healthcare Services, Idstein (Germany); Bethge, O.T.; Antoch, G.; Kroepil, P. [Duesseldorf Univ. (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie

2016-05-15

The number of computed tomography examinations has continuously increased over the last decades and accounts for a major part of the collective radiation dose from medical investigations. For purposes of quality assurance in modern radiology a systematic monitoring and analysis of dose related data from radiological examinations is mandatory. Various ways of collecting dose data are available today, for example the Digital Imaging and Communication in Medicine - Structured Report (DICOM-SR), optical character recognition and DICOM-modality performed procedure steps (MPPS). The DICOM-SR is part of the DICOM-standard and provides the DICOM-Radiation Dose Structured Report, which is an easily applicable and comprehensive solution to collect radiation dose parameters. This standard simplifies the process of data collection and enables comprehensive dose monitoring. Various commercial dose monitoring software devices with varying characteristics are available today. In this article, we discuss legal obligations, various ways to monitor dose data, current dose monitoring software solutions and future perspectives in regard to the EU Council Directive 2013/59/EURATOM.

Cross-disciplinary management of polytrauma patients: radiological screening and comparison; Interdisziplinaeres Management von polytraumatisierten Patienten: Beitrag der Radiologie

Energy Technology Data Exchange (ETDEWEB)

Messmer, P. [Universitaetskliniken Basel, Dept. Chirurgie, Allgemeinchirurgische Klinik, Abt. Traumatologie (Switzerland); Loew, R.; Jacob, A.L. [Universitaetskliniken Basel, Dept. Medizinische Radiologie, Abt. Diagnostische Radiologie (Switzerland)

2001-09-01

The comprehensive survey addresses the various modalities available today for trauma screening and presents a comparative assessment of their value in respect of type of trauma and evidence provided. (orig./CB) [German] Die Versorgung polytraumatischer Patienten stellt hoechste Anforderungen an das Koennen des Radiologen. Neben einer schnellen und schonenden Durchfuehrung der notwendigen Diagnostik darf keine potenziell lebensbedrohende Verletzung uebersehen werden. Die Kriterien fuer eine rationelle Diagnostik wurden im ATLS-Kurs (Advanced Trauma Life Support) zusammengefasst. Es gilt, die sog. 'golden hour' moeglichst effektiv fuer die Primaerdiagnostik und -therapie zu nutzen. Haeufige Verletzungsformen beim Polytrauma sind das Schaedel-Hirn-Trauma, Thoraxverletzungen, Milzverletzungen, Leberverletzungen und Frakturen von Becken, Wirbelsaeule und Extremitaeten. Die Primaere und Sekundaere Radiologische Diagnostik ist abhaengig von der Ausstattung der Klinik und besteht aus einer abdominellen Sonographie, Thorax ap, Beckenuebersicht ap, Halswirbelsaeule seitlich sowie falls vorhanden aus CT und Angiographie. Ein definitiver Schritt zur Verkuerzung der Zeit bis zur Behandlung waeren sterile OP-Einheiten mit integrierter Roentgendiagnostik (moeglichst nativ und CT), die ein staendiges Umlagern und Transportieren des Patienten verhindern koennten. (orig.)

Radiation exposure of patients and personnel in pediatric radiology. Strahlenexposition von Patienten und Personal in der Paediatrischen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Wallbaum, F

1980-01-01

Skin, gonadal and eye lens exposure of children up to the age of 14, X-ray personnel and accompanying adults (mother and nurses) in gastroenterological and urological examinations are investigated. Particular interest is taken in combined examinations, i.e. radiography combined with radioscopy, as these are strongly dependent on the examiner.

Radiation exposure of patients and personnel in pediatric radiology. Strahlenexposition von Patienten und Personal in der Paediatrischen Radiologie

Energy Technology Data Exchange (ETDEWEB)

Wallbaum, F

1980-04-23

Skin, gonadal and eye lens exposure of children up to the age of 14, X-ray personnel and accompanying adults (mother and nurses) in gastroenterological and urological examinations are investigated. Particular interest is taken in combined examinations, i.e. radiography combined with radioscopy, as these are strongly dependent on the examiner.

Radiological procedures: Quality criteria and dose optimisation: French status

International Nuclear Information System (INIS)

Grenier, Ph.; Marshall-Depommier, E.; Bourguignon, M.; Beauvais-March, H.; Valero, M.; Lacronique, J.F.; Frijal, G.

2001-01-01

The Council Directive 97/43/Euratom of June 30 1997 on health protection of individuals against the dangers of ionising radiation in relation to medical exposure has come into force on May, 13 th 2000. French health directorate has entrusted the 'Office de Protection contre les Rayonnements Ionisants (OPRI)' together with the 'Societe Francaise de Radiologie' (SFR) to implement article 6 related to radiological procedures, in order to bring into operation the principle of optimisation. The most frequent diagnostic radiology and interventional procedures (120 protocols) have been standardised in writing. Corresponding patient dosimetry has been determined from measurements on site, calculations and literature review. The criteria for optimisation have been highlighted for each protocols. With the help of the French Society of Medical Physicists (SFPM), measurements are being collected on a large scale in France. Then, knowing more precisely the patient dosimetry of each protocol, referral criteria will be reviewed and prioritised to implement the principle of justification. The authors will present and explain the chosen methodology (methodology of the Accreditation and Evaluation in Health Agency: ANAES) for completing this two years workload program, and will demonstrate clinical examples as well. (author)

Radiation protection in the diagnostic radiology. General viewpoint including CT; Strahlenschutz in der diagnostischen Radiologie. Allgemeine Sichtweise einschliesslich CT

Energy Technology Data Exchange (ETDEWEB)

Kroepil, Patric [Universitaetsklinikum Duesseldorf (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie

2017-07-01

Radiation protection in radiology has received public attention due to reports in the media on radiation hazards due to CT. The contribution covers the issues radiation protection in radiology, including the documentation of dose information, the responsibility of radiologists for their patients, new developments with respect to dose intensive CT and the changes due to the new radiation protection law.

S2k guidelines for diverticular disease and diverticulitis. Diagnosis, classification, and therapy for the radiologist; S2k-Leitlinie Divertikelkrankheit und Divertikulitis. Diagnostik, Klassifikation und Therapie fuer die Radiologie

Energy Technology Data Exchange (ETDEWEB)

Schreyer, A.G. [University Hospital Regensburg (Germany). Inst. of Radiology; Layer, G. [Ludwigshafen Hospital (Germany). Central Inst. for Diagnostic and Interventional Radiology

2015-08-15

Diverticular disease and diverticulitis represent an increasingly common disease especially in patients with advanced age. The German Society of Digestive and Metabolic Diseases (DGVS) as well as the German Society of General and Visceral Surgery (DGAV) in collaboration with the German Radiology Society (DRG) created and published S2k guidelines regarding this topic. Knowledge of the diagnosis and therapy of this common disease is extremely important for the radiologist for the daily clinical routine. In this article we review and discuss the most important clinical situations and algorithms of this disease focusing on radiological topics. Additionally, we introduce the new CCD (classification of diverticular disease) system regarding radiology.

[Evaluation of the knowledge of physicians prescribing CT examinations on the radiation protection of patients].

Science.gov (United States)

Gervaise, A; Esperabe-Vignau, F; Pernin, M; Naulet, P; Portron, Y; Lapierre-Combes, M

2011-01-01

To evaluate the knowledge of physicians prescribing CT examinations on the radiation protection of patients. A questionnaire was distributed to all clinicians on medical staff who prescribe CT examinations. Several questions related to their prescription pattern and their knowledge of radiation protection. Forty-four questionnaires were analyzed. While 70% of physicians claimed that they considered the risks from exposure to ionizing radiation when prescribing a CT examination, only 25% informed their patients about those risks. Knowledge of the radiation dose delivered during CT evaluation of the abdomen and pelvis was poorly understood and the risks related to small doses of radiation were grossly underestimated. Finally, only a third of clinicians had received training with regards to radiation protection. While most clinicians claim that they consider the risks from exposure to ionizing radiation when prescribing a CT examination, the risks are either not well known or not known at all. Increased formation of clinicians with regards to the radiation protection of patients, maybe through a dedicated clinical rotation while in medical school, could be a solution to improve the knowledge of hospital clinicians with regards to radiation protection. Copyright © 2011 Elsevier Masson SAS and Éditions françaises de radiologie. All rights reserved.

Innovations in radiation oncology

International Nuclear Information System (INIS)

Withers, H.R.

1988-01-01

The series 'Medical Radiology - Diagnostic Imaging and Radiation Oncology' is the successor to the well known 'Encyclopedia of Medical Radiology/Handbuch der medizinischen Radiologie'. 'Medical Radiology' brings the state of the art on special topics in a timely fashion. This volume 'Innovation in Radiation Oncology', edited by H.R. Withers and L.J. Peters, presents data on the development of new therapeutic strategies in different oncologic diseases. 57 authors wrote 32 chapters covering a braod range of topics. The contributors have written their chapters with the practicing radiation oncologist in mind. The first chapter sets the stage by reviewing the quality of radiation oncology as it is practiced in the majority of radiation oncology centers in the United States. The second chapter examines how we may better predict the possible causes of failure of conventional radiotherapy in order that the most appropriate of a variety of therapeutic options may eventually be offered to patients on an individual basis. The third chapter discussed how our therapeutic endeavors affect the quality of life, a problem created by our ability to be successful. Following these three introductory chapters there are 29 chapters by highly qualified specialists discussing the newest ideas in subjects of concern to the practicing radiation oncologist. With 111 figs

Investigation of alleged releases of the High Flux Reactor (HFR) in Petten, Netherlands. Measured data from the Nuclear Research and consultancy Group (NRG) in the period September 2001; Onderzoek naar vermeende lozingen HFR Petten. Meetgegevens van NRG in de periode september 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-15

During the open house at the Nuclear Research and consultancy Group (NRG) on May 28th 2006 NRG publicly presented the measuring values of the Central Radiological Monitoring System (CRM). On detailed inquiry of a visitor strongly increased brief peak values appeared on 19 and 26 September 2001. This resulted in questions from many parties (Meldpunt Nucleaire Veiligheid Noord-Holland (Registration office Nuclear Safety North Holland), Provinciale States North Holland, Greenpeace Netherlands and Vereniging Pettemerduinen Kernreactorvrij (Association against Nuclear reactor in the dunes of Petten)) about a possible radiological emission. The press reported a radioactive gas cloud. The Department of Nuclear Safety, Security and Safeguards of the Netherlands Ministry of Housing, Spatial Planning and the Environment has examined the circumstances. The following research questions were examined: (1) How is the CRM system composed? (2) Has there been a radiological emission? (3) How can the peak values be explained? (4) What conclusions can be drawn from the National Measuring network for Radiology of the RIVM? [mk]. [Dutch] Tijdens een open dag bij Nuclear Research and consultancy Group (NRG) op 28 mei 2006 werden door NRG publiekelijk meetwaarden gepresenteerd van het Centraal Radiologisch Monitoring Systeem (CRM). Bij gedetailleerde navraag van een bezoeker manifesteerden zich op twee dagen, 19 en 26 september 2001, sterk verhoogde kort durende piekwaarden. Dit heeft ertoe geleid dat van diverse zijden (Meldpunt Nucleaire Veiligheid Noord-Holland, Provinciale Staten Noord-Holland, Greenpeace Nederland en Vereniging Pettemerduinen Kernreactorvrij!) de KFD vragen bereikten of er sprake zou kunnen zijn van een radiologische emissie. In de publiciteit werd gewag gemaakt van een 'radioactieve gaswolk'. De KFD van de VROM-Inspectie heeft de toedracht hiervan onderzocht. Hierbij zijn de volgende onderzoeksvragen gesteld: (1) Hoe zit het CRM-systeem in elkaar?; (2) Is

Compression of digital images in radiology. Results of a consensus conference; Kompression digitaler Bilddaten in der Radiologie. Ergebnisse einer Konsensuskonferenz

Energy Technology Data Exchange (ETDEWEB)

Loose, R. [Klinikum Nuernberg-Nord (Germany). Inst. fuer Diagnostische und Interventionelle Radiologie; Braunschweig, R. [BG Kliniken Bergmannstrost, Halle/Saale (Germany). Klinik fuer Bildgebende Diagnostik und Interventionsradiologie; Kotter, E. [Universitaetsklinikum Freiburg (Germany). Abt. Roentgendiagnostik; Mildenberger, P. [Mainz Univ. (Germany). Klinik und Poliklinik fuer Diagnostische und Interventionelle Radiologie; Simmler, R.; Wucherer, M. [Klinikum Nuernberg (Germany). Inst. fuer Medizinische Physik

2009-01-15

Purpose: Recommendations for lossy compression of digital radiological DICOM images in Germany by means of a consensus conference. The compression of digital radiological images was evaluated in many studies. Even though the results demonstrate full diagnostic image quality of modality-dependent compression between 1:5 and 1:200, there are only a few clinical applications. Materials and Methods: A consensus conference with approx. 80 interested participants (radiology, industry, physics, and agencies) without individual invitation was organized by the working groups AGIT and APT of the German Roentgen Society DRG to determine compression factors without loss of diagnostic image quality for different anatomical regions for CT, CR/DR, MR, RF/XA examinations. The consent level was specified as at least 66 %. Results: For individual modalities the following compression factors were recommended: CT (brain) 1:5, CT (all other applications) 1:8, CR/DR (all applications except mammography) 1:10, CR/DR (mammography) 1:15, MR (all applications) 1:7, RF/XA (fluoroscopy, DSA, cardiac angio) 1:6. The recommended compression ratios are valid for JPEG and JPEG 2000 /Wavelet compressions. Conclusion: The results may be understood as recommendations and indicate limits of compression factors with no expected reduction of diagnostic image quality. They are similar to the current national recommendations for Canada and England. (orig.)

Research trends in radiobiology since 40 years. a new approach: the enzymatic repair function of DNA, internal factor in evolution of biological systems under irradiation; Etude des tendances des recherches en radiologie depuis 40 ans. Une nouvelle voie de recherche: la fonction de reparation enzymatique de l'ADN, facteur interne d'evolution des systemes biologiques sous rayonnement

Energy Technology Data Exchange (ETDEWEB)

Mouton, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

In the first part of the report, the author attempts to draw an historical scheme of successive research working hypotheses in radiobiology since 1924. Less than a generation ago the effect of radiation exposure were viewed as being direct, immediate, irreparable and unmodifiable. Now it is generally accepted that radiation lesion can also be indirect, delayed, reparable and often modified with appropriate chemical or biochemical treatment. It was however in 1962-1964 that came the decisive breakthrough in radiobiology with the discovery that the cell possesses a natural active self-defense mechanism against whatever stress would affect the integrity of the genetic message contained in the DNA structure itself. The existence of what could be considered as a fourth DNA function i.e. self-repair by enzymatic action under genetic control-brings at least to radiobiology the missing molecular biology basis it needed to get out of its 'phenomenological night' after abandon of the generalization of Lea's theory through lack of experimental evidence. In the second part, which is a prospective one, the author tries to set an enlarged synthesis considering the possible role of DNA repair system not only in cell survival - in presence or absence of dose modifiers or mutagens - but also in the artificial and natural evolution of biological system exposed to sub-lethal doses of radiation. Most recent data from the literature fit well with what must be still considered as a general working hypothesis. Studies dealing with phenotypic and genotypic characters linked with the acquisition of gamma and UV radiation resistance in 'Escherichia coli K12' has been started by the author, in collaboration with O. Tremeau, in order to bring a new experimental contribution in this respect. (author) [French] Dans la premiere partie, l'auteur tente de retracer l'historique des hypotheses successives qui ont jalonne les avances de la radiobiologie depuis 1924. Il y a moins d'une generation, l

Research trends in radiobiology since 40 years. a new approach: the enzymatic repair function of DNA, internal factor in evolution of biological systems under irradiation; Etude des tendances des recherches en radiologie depuis 40 ans. Une nouvelle voie de recherche: la fonction de reparation enzymatique de l'ADN, facteur interne d'evolution des systemes biologiques sous rayonnement

Energy Technology Data Exchange (ETDEWEB)

Mouton, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

In the first part of the report, the author attempts to draw an historical scheme of successive research working hypotheses in radiobiology since 1924. Less than a generation ago the effect of radiation exposure were viewed as being direct, immediate, irreparable and unmodifiable. Now it is generally accepted that radiation lesion can also be indirect, delayed, reparable and often modified with appropriate chemical or biochemical treatment. It was however in 1962-1964 that came the decisive breakthrough in radiobiology with the discovery that the cell possesses a natural active self-defense mechanism against whatever stress would affect the integrity of the genetic message contained in the DNA structure itself. The existence of what could be considered as a fourth DNA function i.e. self-repair by enzymatic action under genetic control-brings at least to radiobiology the missing molecular biology basis it needed to get out of its 'phenomenological night' after abandon of the generalization of Lea's theory through lack of experimental evidence. In the second part, which is a prospective one, the author tries to set an enlarged synthesis considering the possible role of DNA repair system not only in cell survival - in presence or absence of dose modifiers or mutagens - but also in the artificial and natural evolution of biological system exposed to sub-lethal doses of radiation. Most recent data from the literature fit well with what must be still considered as a general working hypothesis. Studies dealing with phenotypic and genotypic characters linked with the acquisition of gamma and UV radiation resistance in 'Escherichia coli K12' has been started by the author, in collaboration with O. Tremeau, in order to bring a new experimental contribution in this respect. (author) [French] Dans la premiere partie, l'auteur tente de retracer l'historique des hypotheses successives qui ont jalonne les avances de la radiobiologie depuis 1924

Radiology. Vol. 2. Radiologie. Bd. 2. Lehrbuch fuer den 2. Abschnitt der Aerztlichen Pruefung, das praktische Jahr und die fachaerztliche Weiterbildung

Energy Technology Data Exchange (ETDEWEB)

Lissner, J

1979-01-01

The present volume 2 of the radiology compendium discusses clinical radiology with the list of subjects to be studied in the 2nd section of clinical training. It is dealing with the following themes: Internal medicine, paediatrics, urology, general surgery, radiological methods in gynaecology and obstetrics, orthopaedics, neurology, ophthalmology, otolaryngology, dentistry and orthodontology, radiotherapy in dermatology.

Can we assess healing of surgically treated long bone fractures on radiograph?

Science.gov (United States)

Perlepe, V; Omoumi, P; Larbi, A; Putineanu, D; Dubuc, J-E; Schubert, T; Vande Berg, B

2018-06-01

To determine the frequency and causes for limitations in the radiographic evaluation of surgically treated long bone fractures. Six readers separately scored 140 sets of antero-posterior (AP) and lateral radiographs of surgically treated long bone fractures, using a radiographic union score (RUS). We determined the rate of assessability of the fracture edges at each of the four cortical segments (n=560) seen tangentially on the two radiographs and the causes for non-assessability. The rate of feasibility of the RUS (more than two fracture edges assessable per fracture) was determined and compared according to different parameters. Fracture edges were visible in 71% to 81% of the 560 cortical segments. Metal hardware superimposition was the most frequent cause for non-assessability (79-95%). RUS values could be calculated in 58% to 75% of fractures. Scoring was statistically significantly less frequently calculable in plated (31-56%) than in nailed fractures (90-97%), in distal (47-61%) than in proximal (78-89%) bones and in upper (27-49%) than in lower (76-91%) limb bones (P≤0.01). The type of stabilization hardware is the main limiting factor in the radiographic assessment of surgically treated long bone fractures. Scoring was feasible in only 31% to 56% of plated fractures. Copyright © 2018 Société française de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Fat suppression at three-dimensional T1-weighted MR imaging of the hands: Dixon method versus CHESS technique.

Science.gov (United States)

Kirchgesner, T; Perlepe, V; Michoux, N; Larbi, A; Vande Berg, B

2018-01-01

To compare the effectiveness of fat suppression and the image quality of the Dixon method with those of the chemical shift-selective (CHESS) technique in hands of normal subjects at non-enhanced three-dimensional (3D) T1-weighted MR imaging. Both hands of 14 healthy volunteers were imaged with 3D fast spoiled gradient echo (FSPGR) T1-weighted Dixon, 3D FSPGR T1-weighted CHESS and 3D T1-weighted fast spin echo (FSE) CHESS sequences in a 1.5T MR scanner. Three radiologists scored the effectiveness of fat suppression in bone marrow (EFS BM ) and soft tissues (EFS ST ) in 20 joints per subject. One radiologist measured the signal-to-noise ratio (SNR) in 10 bones per subject. Statistical analysis used two-way ANOVA with random effects (PCHESS sequence and the 3D FSE T1-weighted CHESS sequence (PCHESS sequence (PCHESS sequence in the axial plane (P=0.0028). Mean SNR was statistically significantly higher for 3D FSPGR T1-weighted Dixon sequence than for 3D FSPGR T1-weighted CHESS and 3D FSE T1-weighted CHESS sequences (PCHESS technique at 3D T1-weighted MR imaging of the hands. Copyright © 2017 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Diagnostic accuracy of point shear wave elastography in the detection of portal hypertension in pediatric patients.

Science.gov (United States)

Burak Özkan, M; Bilgici, M C; Eren, E; Caltepe, G

2018-03-01

The purpose of this study was to determine the usefulness of point shear wave elastography (p-SWE) of the liver and spleen for the detection of portal hypertension in pediatric patients. The study consisted of 38 healthy children and 56 pediatric patients with biopsy-proven liver disease who underwent splenic and liver p-SWE. The diagnostic performance of p-SWE in detecting clinically significant portal hypertension was assessed using receiver operating characteristic (ROC) curves. Reliable measurements of splenic and liver stiffness with p-SWE were obtained in 76/94 (81%) and 80/94 patients (85%), respectively. The splenic stiffness was highest in the portal hypertension group (Pportal hypertension was lower for splenic p-SWE than for liver p-SWE (0.906 vs. 0.746; P=0.0239). The cut-off value of splenic p-SWE for portal hypertension was 3.14m/s, with a specificity of 98.59% and a sensitivity of 68.18%. The cut-off value of liver p-SWE for portal hypertension was 2.09m/s, with a specificity of 80.28% and a sensitivity of 77.27%. In pediatric patients, p-SWE is a reliable method for detecting portal hypertension. However, splenic p-SWE is less accurate than liver p-SWE for the diagnosis of portal hypertension. Copyright © 2017 Editions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Clinical value of SPECT/CT imaging in the diagnosis of bone metastasis

International Nuclear Information System (INIS)

Wang Xinhua; Zhao Yanping; Lu Haijian; Dong Zhanfei

2010-01-01

Objective: To evaluate the clinical value of 99 Tc m -methylene diphosphonic acid (MDP) SPECT/CT imaging for the diagnosis of bone metastasis. Methods: Patients suspected for bone metastasis and with bone pain of unknown origin were included in this study (n=237). All cases underwent SPECT and CT imaging at 180 min after 99 Tc m -MDP injection. Diagnosis was confirmed by pathology (n=21), more than 2 kinds of radiologieal imaging (MRI, CT, X-ray) (n=106), and clinical follow up in 2 years (n=110). χ 2 -test was used to compare the results of planar and SPECT/CT imaging using SAS 6.12 software. Results: In 237 patients, planar imaging of 142 cases matched the final diagnosis in which 72 had benign lesions and 70 had bone metastases. The definite coincidence rate was 95.30% (142/149). SPECT/CT imaging of 224 cases matched the final diagnosis in which 104 had benign lesions and 120 cases diagnosed as bone metastases. The coincidence and definite coincidence rates were 94.51% (224/237), and 99.48% (192/193). Difference in the definite coincidence rate between planar and SPECT/CT imaging was statistically significant (χ 2 = 5.37, P=0.024). Conclusion: SPECT/CT imaging is valuable for accurate localization of osseous pathology and for improvement of diagnosing bone metastasis. (authors)

Fibroadenoma: can fine needle aspiration biopsy avoid short term follow-up?

Science.gov (United States)

Leconte, I; Abraham, C; Galant, C; Sy, M; Berlière, M; Fellah, L

2012-10-01

To confirm whether fine needle aspiration biopsy (FNAB) can avoid close monitoring, a source of worry for women patients with a suspected fibroadenoma found by ultrasound, and requiring their compliance. Over 39months, 427 nodules with a diagnosis of fibroadenoma were sampled in 372 patients using ultrasound-guided FNAB. The sonographic appearance of all the nodules suggested BI-RADS category 3 fibroadenomas. The mean size of the fibroadenomas was 9mm. The mean duration of follow-up was 29.7months. Seven nodules had atypical cytology: a microbiopsy and/or excision found a simple fibroadenoma (n=3), mastitis (n=1), a fibroadenoma associated with a papilloma (n=1), fibrosis (n=1) and normal tissue (n=1). Seven other nodules were resected during treatment for synchronous cancer, and were diagnosed as fibroadenomas. Two hundred and seventy-six nodules were followed-up (121 patients were lost to follow-up [n=132]) and the appearance of 263 nodules (95.29%) was stable. Seven nodules, which had increased in size, underwent another FNAB or microbiopsy or surgery. Five nodules were not found again. The borders of one nodule showed modifications. The use of fine needle aspiration biopsy, interpreted by an experienced cytologist, means that short term follow-up of fibroadenomas can be avoided. Copyright © 2012 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Overview of digital breast tomosynthesis: Clinical cases, benefits and disadvantages.

Science.gov (United States)

Nguyen, T; Levy, G; Poncelet, E; Le Thanh, T; Prolongeau, J F; Phalippou, J; Massoni, F; Laurent, N

2015-09-01

In France, the national breast cancer-screening program is based on mammography combined with clinical breast examination, and sometimes breast ultrasound for patients with high breast density. Digital breast tomosynthesis is a currently assessed 3D imaging technique in which angular projections of the stationary compressed breast are acquired automatically. When combined with mammography, clinicians can review both conventional (2D) as well as three-dimensional (3D) data. The purpose of this article is to review recent reports on this new breast imaging technique and complements this information with our personal experience. The main advantages of tomosynthesis are that it facilitates the detection and characterization of breast lesions, as well as the diagnosis of occult lesions in dense breasts. However, to do this, patients are exposed to higher levels of radiation than with 2D mammography. In France, the indications for tomosynthesis and its use in breast cancer-screening (individual and organized) are yet to be defined, as is its role in the diagnosis and staging of breast cancer (multiple lesions). Further studies assessing in particular the combined reconstruction of the 2D view using 3D tomosynthesis data acquired during a single breast compression event, and therefore reducing patient exposure to radiation, are expected to provide valuable insight. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Emergency arterial embolization of upper gastrointestinal and jejunal tumors: An analysis of 12 patients with severe bleeding.

Science.gov (United States)

Zandrino, F; Tettoni, S M; Gallesio, I; Summa, M

2017-01-01

The goal of this study was to retrospectively assess the efficacy of emergency percutaneous transcatheter arterial embolization in patients with severe bleeding due to upper gastrointestinal or jejunal tumor. Twelve patients (7 men, 5 women; mean age, 74 years±14 (SD); range: 54-86 years) with severe bleeding from the upper gastrointestinal tract, with failed endoscopic treatment not eligible for emergency surgery were treated by emergency percutaneous transcatheter arterial embolization. The bleeding cause was gastric tumor in 7 patients, duodenal tumor in 4 patients and jejunal tumor in one patient. Procedure details and follow-up were reviewed. Twelve embolization procedures were performed using various embolic agents. Embolization was achieved and bleeding was stopped in all patients. Five patients underwent surgery within the 30 days following embolization. In the remaining 7 patients, no bleeding occurred at 1 month follow-up in 6 patients and bleeding recurred in one patient at 1 month. In this later patient, endoscopic treatment was successful. The results of our study suggest that transcatheter arterial embolization is safe and effective in patients with severe arterial bleeding due to upper gastrointestinal or jejunal tumor. In some patients, transcatheter arterial embolization can be used as a bridge to surgery. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Correlation between apparent diffusion coefficient value on diffusion-weighted MR imaging and Gleason score in prostate cancer.

Science.gov (United States)

Wu, X; Reinikainen, P; Vanhanen, A; Kapanen, M; Vierikko, T; Ryymin, P; Hyödynmaa, S; Kellokumpu-Lehtinen, P-L

2017-01-01

To investigate whether diffusion-weighted imaging (DWI) apparent diffusion coefficient (ADC) correlates with prostate cancer aggressiveness and further to compare the diagnostic performance of ADC and normalized ADC (nADC: normalized to non-tumor tissue). Thirty pre-treatment patients (mean age, 69years; range: 59-78years) with prostate cancer underwent magnetic resonance imaging (MRI) examination, including DWI with three b values: 50, 400, and 800s/mm 2 . Both ADC and nADC were correlated with the Gleason score obtained through transrectal ultrasound-guided biopsy. The tumor minimum ADC (ADC min : the lowest ADC value within tumor) had an inverse correlation with the Gleason score (r=-0.43, Pcorrelated with the Gleason score (r=-0.52 and r=-0.55, P<0.01; respectively), and they were lower in patients with Gleason score 3+4 than those with Gleason score 3+3 (P<0.01; respectively). Receiver operating characteristic (ROC) analysis showed that the area under the ROC curve was 0.765, 0.818, or 0.833 for the ADC min , nADC min , or nADC mean ; respectively, in differentiating between Gleason score 3+4 and 3+3 tumors. Tumor ADC min , nADC min , and nADC mean are useful markers to predict the aggressiveness of prostate cancer. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Radioanatomy of the retroperitoneal space.

Science.gov (United States)

Coffin, A; Boulay-Coletta, I; Sebbag-Sfez, D; Zins, M

2015-02-01

The retroperitoneum is a space situated behind the parietal peritoneum and in front of the transversalis fascia. It contains further spaces that are separated by the fasciae, between which communication is possible with both the peritoneal cavity and the pelvis, according to the theory of interfascial spread. The perirenal space has the shape of an inverted cone and contains the kidneys, adrenal glands, and related vasculature. It is delineated by the anterior and posterior renal fasciae, which surround the ureter and allow communication towards the pelvis. At the upper right pole, the perirenal space connects to the retrohepatic space at the bare area of the liver. There is communication between these two spaces through the Kneeland channel. The anterior pararenal space contains the duodenum, pancreas, and the ascending and descending colon. There is free communication within this space, and towards the mesenteries along the vessels. The posterior pararenal space, which contains fat, communicates with the preperitoneal space at the anterior surface of the abdomen between the peritoneum and the transversalis fascia, and allows communication with the contralateral posterior pararenal space. This space follows the length of the ureter to the pelvis, which explains the communication between these areas and the length of the pelvic fasciae. Copyright © 2014 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Occurrence of undesirable tissue reaction in interventional vascular radiology; La radiologie interventionnelle et les risques associes: etude d'un cas clinique

Energy Technology Data Exchange (ETDEWEB)

Thouveny, Francine [Service de radiologie, Centre Hospitalier Universitaire d' Angers, 4, rue Larrey, 49933 Angers Cedex 9 (France)

2011-07-15

After lengthy technological development, the constantly evolving diagnostic and therapeutic interventional radiology procedures have become vital factors in patient care. X-rays remain the key tool for these techniques in a large number of cases, including certain complex vascular pathologies for which endovascular treatment is associated with prolonged irradiation. The risk they represent are however outweighed by the underlying therapeutic stakes and remains of secondary medical concern. In these difficult cases, which require maximum concentration on the intervention, the practitioner will need to be aided by tools that strictly limit and monitor the dose. The manufacturers and radiological physicists must be involved in configuring the facilities used and the health professionals in determining reference levels and professional recommendations that take account of the dose optimisation tools. (authors)

Diagnostics of pleural effusions and atelectases: A comparison of sonography and radiology. Diagnostik von Pleuraerguessen und Atelektasen: Sonographie und Radiologie im Vergleich

Energy Technology Data Exchange (ETDEWEB)

Kelbel, C.; Boerner, N.; Weilemann, L.S.; Meyer, J. (Mainz Univ. (Germany, F.R.). 2. Medizinische Klinik und Poliklinik); Schadmand, S.; Klose, K.J.; Thelen, M. (Mainz Univ. (Germany, F.R.). Radiologische Klinik)

1991-02-01

In a prospective study it was shown that chest ultrasonography is superior to conventional X-ray diagnosis of recumbent patients in diagnosing pleural effusion and lung atelectasis. In 110 supine radiographs we found a sensitivity of 47% and a specificity of 71% for right pleural effusions and a sensitivity of 55% and a specificity of 93% for left pleural effusions in comparison to 110 sonographic examinations. The results of supine radiographs in detection of atelectasis were less efficient: sensitivity for the right side: 7%; sensitivity for the left side: 13,5%. Hence, the knowledge of chest ultrasonographic diagnosis can improve the interpretation of supine radiographs. (orig.).

Acute deep vein thrombosis and endovascular techniques: It is time for a new aggiornamento!

Science.gov (United States)

Pernès, J-M; Auguste, M; Kovarski, S; Borie, H; Renaudin, J-M; Coppe, G

2012-10-01

The stated aims of treating acute deep vein thrombosis (DVT) are to prevent a pulmonary embolism, stop the clot from spreading, reduce the risk of a recurrence; they are less concerned with the late morbidity associated with post-thrombotic syndrome (PTS). In accordance with the French (Afssaps, 2009) and North American (ACCP, 2008) recommendations, anticoagulants (LMWH, heparin, AVK) form the cornerstone for treating DVT. These treatments appear to be far less effective in preventing post-thrombotic syndrome (PTS), associated with venous hypertension, residual occlusion, and with reflux caused by valve incompetence. Given that, the new aim is to optimise the prevention of PTS, the ACCP guidelines, unlike those of Afssaps, "suggest" for selected patients suffering from acute iliofemoral DVT, the use of both classic anticoagulants, and in situ percutaneous administration of thrombolytic drugs (recommendation grade 2B) and simultaneous correction of any underlying anatomical anomalies using angioplasty and stenting (recommendation 2C). Contemporary endovascular methods, referred to collectively as "facilitated" thrombolysis, combine low doses of rtPa or Urokinase administered locally, and the removal of the clot using various mechanical, rotating, rheolytic systems, or using ultrasound. The results of non-randomised, heterogeneous studies objectivised a lysis rate of 80%, a 50% lower risk of haemorrhage complications compared with systemic thrombolysis (modern "open vein" concept which underpins the hope of an improvement in the late prognosis of acute DVT, through the removal of a clot, thereby improving permeability and valve integrity; this hypothesis is supported by the results at 24 months of a randomised CaVent objectifying absolute risk reduction of 15% in the thrombolysis in situ. The current randomised study (ATTRACT trial) comparing the combination of "facilitated thrombolysis" in addition to the usual treatment with the traditional treatment alone for

Effect of background parenchymal enhancement on breast cancer detection with magnetic resonance imaging.

Science.gov (United States)

Telegrafo, M; Rella, L; Stabile Ianora, A A; Angelelli, G; Moschetta, M

2016-03-01

To investigate whether background parenchymal enhancement (BPE) may influence the sensitivity of dynamic contrast-enhanced magnetic resonance (DCE-MR) imaging in breast cancer detection. A total of 180 consecutive women with 194 breast cancers underwent MR imaging examination. Women were assigned to two different groups depending on the degree of BPE. Group 1 consisted of women with minimal or mild BPE and group 2 of women with moderate or marked BPE. The distributions of histotypes of tumors within the two groups were compared using the χ(2) test. Difference in sensitivities of DCE-MR imaging for tumor detection between the two groups was searched for using the Student t-test. No differences in terms of distributions of histotypes of tumors between the two groups of women were found (P=0.5). The 11% difference in sensitivity of DCE-MR imaging for tumor detection between group 1 (91/92; 99%; 95% CI: 94-100%) and group 2 (90/102; 88%; 95% CI: 80-94%) was statistically significant (P=0.0058). The sensitivity of DCE-MR imaging is significantly lower in women with moderate and marked BPE as compared with women with minimal and mild BPE regardless of cancer histotype. BPE could represent a limitation for breast MR imaging interpretation and should be indicated in MR imaging reports. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Diagnostic value of 18F-FDG-PET/CT for the follow-up and restaging of soft tissue sarcomas in adults.

Science.gov (United States)

Kassem, T W; Abdelaziz, O; Emad-Eldin, S

2017-10-01

The purpose of this study was to evaluate the clinical utility of 2-[ 18 F] fluoro-2-deoxy-D-glucose ( 18 FDG) positron emission tomography (PET)/computed tomography (CT) ( 18 F-FDG-PET/CT) in the follow-up of adult patients with soft tissue sarcomas. We prospectively evaluated 37 consecutive patients with known soft tissue sarcoma with 18 F-FDG-PET/CT examination for suspected recurrence of disease. They were 21 men and 16 women with a mean age of 49.6±10.6 (SD) years (range, 34-75years). The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and accuracy of 18 F-FDG-PET/CT examination were calculated on a per patient basis. 18 F-FDG-PET/CT showed an overall diagnostic accuracy of 91.8%, sensitivity of 90% and a specificity of 100%. The positive predictive value and negative predictive value were 100 and 70%, respectively. The 18 F-FDG-PET/CT interpretations were correct in 34/37 patients (91.8%). Incorrect interpretations occurred in three patients (8.1%). Reasons for false negative findings were low 18 F-FDG uptake of local recurrence in one patient and low 18 F-FDG uptake of subcentimetric inguinal lymph node metastases. 18 F-FDG-PET/CT has a high diagnostic value in the follow-up of patients with soft tissue sarcoma. Copyright © 2017 Editions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Push versus pull gastrostomy in cancer patients: A single center retrospective analysis of complications and technical success rates.

Science.gov (United States)

Currie, B M; Getrajdman, G I; Covey, A M; Alago, W; Erinjeri, J P; Maybody, M; Boas, F E

2018-04-28

To compare the technical success and complication rates of push versus pull gastrostomy tubes in cancer patients, and to examine their dependence on operator experience. A retrospective review was performed of 304 cancer patients (170 men, 134 women; mean age 60.3±12.6 [SD], range: 19-102 years) referred for primary gastrostomy tube placement, 88 (29%) of whom had a previously unsuccessful attempt at percutaneous endoscopic gastrostomy (PEG) placement. Analyzed variables included method of insertion (push versus pull), indication for gastrostomy, technical success, operator experience, and procedure-related complications within 30 days of placement. Gastrostomy tubes were placed for feeding in 189 patients and palliative decompression in 115 patients. Technical success was 91%: 78% after endoscopy had previously been unsuccessful and 97% when excluding failures associated with prior endoscopy. In the first 30 days, there were 29 minor complications (17.2%) associated with push gastrostomies, and only 8 minor complications (7.5%) with pull gastrostomies (Ptechnical success rates for more versus less experienced operators. Pull gastrostomy tube placement had a lower rate of complications than push gastrostomy tube placement, especially when the indication was decompression. The technical success rate was high, even after a failed attempt at endoscopic placement. Both the rates of success and complications were independent of operator experience. Copyright © 2018 Société française de radiologie. Published by Elsevier Masson SAS. All rights reserved.

The role of tomosynthesis in breast cancer staging in 75 patients.

Science.gov (United States)

Mercier, J; Kwiatkowski, F; Abrial, C; Boussion, V; Dieu-de Fraissinette, V; Marraoui, W; Petitcolin-Bidet, V; Lemery, S

2015-01-01

Compare tomosynthesis to mammography, ultrasound, MRI, and histology for the detection and staging of BI-RADS 4-5 anomalies, as a function of breast composition, lesion location, size, and histology. Seventy-five patients underwent mammography, tomosynthesis, ultrasound, and MRI. The diagnostic accuracy of the different examinations was compared. The sensitivities for detection were as follows: 92.5% with MRI, 79% for ultrasound, 75% for tomosynthesis, and 59.5% for mammography. Tomosynthesis improves the sensitivity of mammography (P=0.00013), but not the specificity. The detection of multifocality and multicentricity was improved, but not significantly. Tomosynthesis identified more lesions than mammography in 10% of cases and improved lesion staging irrespective of the density, but was still inferior to MRI. The detection of ductal neoplasia was superior with tomosynthesis than with mammography (P=0.016), but this was not the case with lobular cancer. The visualization of masses was improved with tomosynthesis (P=0.00012), but not microcalcifications. Tomosynthesis was capable of differentiating lesions of all sizes, but the smaller lesions were easier to see. Lesion sizes measured with tomosynthesis, excluding the spicules, concurred with histological dimensions. Spicules lead to an overestimation of the size. In our series, tomosynthesis found more lesions than mammography in 10% of patients, resulting in an adaption of the surgical plan. Copyright © 2014 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Prophylaxis and treatment of side effects due to iodinated contrast media relevant to radiological practice; Radiologisch praxisrelevante Prophylaxe und Therapie von Nebenwirkungen jodhaltiger Kontrastmittel

Energy Technology Data Exchange (ETDEWEB)

Becker, C. [Klinikum Grosshadern der Ludwig-Maximilians-Universitaet Muenchen, Institut fuer Klinische Radiologie, Muenchen (Germany)

2007-09-15

Increased utilization of iodinated contrast media may be associated with increased incidence of adverse events. The most important side effects include contrast-induced nephropathy, anaphylactoid reaction, thyrotoxicosis, and extravasation. In patients with moderate renal dysfunction, saline hydration and reduction of contrast media volume are recommended. No regime to prevent anaphylactoid reactions has yet proven to be efficient. If subclinical hyperthyroidism has been determined, prophylaxis with sodium perchlorate is advised. Contrast-induced nephropathy is commonly transient and needs to be followed over time. Mild general anaphylactoid reactions may be treated with antihistaminic drugs and corticosteroids. Furthermore the choice of the X-ray contrast media might influence the risk of any adverse effects. (orig.) [German] Durch den zunehmenden Einsatz jodhaltiger Kontrastmittel in der Radiologie steigt auch die Rate der Nebenwirkungen; zu den wichtigsten gehoeren die kontrastmittelinduzierte Nephropathie, anaphylaktoide Reaktion, thyreotoxische Krise und Extravasation. Bei Patienten mit mittelgradig eingeschraenkter Nierenfunktion wird eine Prophylaxe durch Hydrierung und Reduktion der KM-Menge empfohlen. Bei hochgradig eingeschraenkter Nierenfunktion sollte die Kontrastmittelgabe nur noch kontrolliert im interdisziplinaeren Konsens erfolgen. Eine nachgewiesen wirkungsvolle Prophylaxe anaphylaktoider Reaktionen ist bisher nicht bekannt. Bei Nachweis einer sublatenten Hyperthyreose ist die Gabe von Natriumperchlorat eine sinnvolle Gegenmassnahme. Eine kontrastmittelinduzierte Nephropathie ist meistens transient und sollte mehrfach im Verlauf kontrolliert werden. Leichte allgemeine anaphylaktoide Reaktionen koennen mit Antihistaminika und Kortikosteroiden behandelt werden. Auch die Wahl des Roentgenkontrastmittels koennte Einfluss auf das Risiko von Nebenwirkungen haben. (orig.)

Evaluation of conventional and digital radiography capacities for distinguishing dental materials on radiograms depending on the present radiopacifying agent.

Science.gov (United States)

Antonijević, Djordje; Ilić, Dragan; Medić, Vesna; Dodić, Slobodan; Obradović-Djuriĉić, Kosovka; Rakoĉević, Zoran

2014-11-01

The radiopacity of an endodontic material can considerably vary as measured on film and a digital sensor. Digital radiography offers numerous advantages over conventional film-based radiography in dental clinical practice regarding both diagnostic capabilities and postintervention procedures. The aim of this study was to investigate the capacity of conventional and charge-conpled device (CCD) based digital radiography to detect material on radiograph depending on the radio-pacifying agent present in the mate- rial. Experimental cements were formulated by mixing Portland cement with the following radiopacifying agents: zinc oxide (ZnO), zirconium oxide (ZrO2), titanium dioxide (TiO2), barium sulphate (BaSO4), iodoform (CHI3), bismuth oxide (Bi2O3) and ytterbium trifluoride (YbF3). In addition, 5 endodontic materials comprising Endometh- asone, Diaket, N2, Roth 801 and Acroseal were investigated to serve as control. Per three specimens of each material were radiographed alongside an aluminum step wedge on film (Eastman Kodak Company, Rochester, NY) and a CCD-based digital sensor (Trophy Radiologie, Cedex, France). Radiopacity values were calculated by converting the radiographic densities of the specimens expressed as a mean optical densities or mean grey scale values into equivalent thickness of aluminum. Two-way ANOVA detected no significant differences with respect to the imaging system (p > 0.05), but the differences were significant with respect to radiopacifier (p < 0.001) and the interaction of the two factors (p < 0.05). Paired t-test revealed significant differences between the methods used for pure Portland cement, all concentrations of BaSO4 and CHI3, 10% and 20% additions of ZrO2 and Bi2O3 and 10% and 30% additions of YbF3 (p < 0.05). The materials which incorporate CHI3 OR BaSO4 as radiopacifying agents are expected to be significantly more radiopaque on a digital sensor than on film. During clinical practice one should concern to the quality of contrast

The use of X Rays in diagnostic and interventional imaging, excluding radiotherapy. Report and recommendations

International Nuclear Information System (INIS)

Dubousset, Jean

2016-01-01

The X-Ray discovery (W.C. Roentgen, 1895) offers an immediate progress to the medical efficiency. Today, the medical diagnostic imaging knows a considerable and constant growing when becoming 'interventional', as a surgical help in the operating room. These 'ionizing' radiations, simultaneously, are the first treatment for cancers (A. Beclere, 1900's). But their use in diagnostic presents a potential danger, in children and young people who are the most sensible. The medical and paramedical members of the team are dangerously exposed, too, through the accumulative exposure. Our group reminds the consequences of the ionizing radiations. Invisible, they do not create the suspicion. Therefore, the radioprotection is mandatory because of the all-lifelong cumulative dose of exposure. Many Rules and obligations, international (WHO), European (EU), and national (Agencies, HAS, Ministry of health) with the close cooperation of Societe Francaise de Radiologie (SFR) and Societe Francaise de Radioprotection (SFRP) either in radiodiagnosis or in interventional (500.000 procedures each year in France). Closely concerned by the observance of this radioprotection, the ANM had given information and texts from more than 10 years. Alas, as a pediatric orthopedist surgeon, we observe that today half of the irradiation complications (in the past from radiotherapy) went from interventional radiological procedures (and dental exercise). We went to a 30 years bibliography about this question and to a memorandum about the new indications in modern imaging and its indications with minimization of the dose delivery. We insist on the non-ionizing radiations (MRI, echography, photonic techniques). Five guidelines, concluding the text are underlined. (authors)

Leakage and scattered radiation from hand-held dental x-ray unit

International Nuclear Information System (INIS)

Kim, Eun Kyung

2007-01-01

To compare the leakage and scattered radiation from hand-held dental X-ray unit with radiation from fixed dental X-ray unit. For evaluation we used one hand-held dental X-ray unit and Oramatic 558 (Trophy Radiologie, France), a fixed dental X-ray unit. Doses were measured with Unfors Multi-O-Meter 512L at the right and left hand levels of X-ray tube head part for the scattered and leakage radiation when human skull DXTTR ΙΙΙ was exposed to both dental X-ray units. And for the leakage radiation only, doses were measured at the immediately right, left, superior and posterior side of the tube head part when air was exposed. Exposure parameters of hand-held dental X-ray unit were 70 kVp, 3 mA , 0.1 second, and of fixed X-ray unit 70 kVp, 8 mA, 0.45 second. The mean dose at the hand level when human skull DXTTR ΙΙΙ was exposed with portable X-ray unit 6.39 μGy, and the mean dose with fixed X-ray unit 3.03 μGy (p<0.001). The mean dose at the immediate side of the tube head part when air was exposed with portable X-ray unit was 2.97 μGy and with fixed X-ray unit the mean dose was 0.68 μGy (p<0.01). The leakage and scattered radiation from hand-held dental radiography was greater than from fixed dental radiography

Apparent diffusion coefficient measurement of ovarian stroma: A potential tool for the diagnosis of polycystic ovary syndrome.

Science.gov (United States)

Samanci, C; Alis, D; Ustabasioglu, F E; Ozmen, E; Ucar, A K; Aslan, M; Habibi, H A; Bakan, S; Ozcabi, B; Evliyaoğlu, S O; Adaletli, I

2017-01-01

The purpose of this study was to assess the diagnostic value of measuring the apparent diffusion coefficient (ADC) of ovarian stroma in polycystic ovary syndrome (PCOS). This study was approved by the institutional review board and informed consent was obtained from each women. A total of 17 women (mean age, 22.2 years±5.1 [SD]; range, 16-33 years) with a diagnosis of PCOS according to the Androgen Excess and PCOS Society criteria and 18 healthy women (mean age, 22.8 years±5.2 [SD]; range, 16-31 years) who served as a control group were included in this prospective study. ADC values of the ovarian stroma during the early follicular phase were calculated by two observers in the two groups. Comparisons were performed using the Student t-test. The mean ADC value in woman with PCOS (1.29±0.27×10 -3  mm 2 /s; range: 0.59×10 -3 - 1.88×10 -3  mm 2 /s) was significantly lower than that in the control group (1.48±0.17×10 -3 mm 2 /s; range: 1.12×10 -3 - 1.86×10 -3 mm 2 /s) (Povarian stroma are lower in patients with PCOS than in control subjects. ADC measurement of ovarian stroma in women with PCOS might help improve the diagnosis of PCOS. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Safety and efficacy of superior rectal artery embolization with particles and metallic coils for the treatment of hemorrhoids (Emborrhoid technique).

Science.gov (United States)

Zakharchenko, A; Kaitoukov, Y; Vinnik, Y; Tradi, F; Sapoval, M; Sielezneff, I; Galkin, E; Vidal, V

2016-11-01

The purpose of this study was to comprehensively evaluate the short-term outcomes after percutaneous embolization of the superior rectal artery (SRA) with metallic coils and particles for the management of hemorrhoids. Forty patients (15 men, 25 women) with a mean age of 35±5 years (SD) (range: 25-65 years) were prospectively enrolled. All patients had symptomatic hemorrhoids. The distribution of internal hemorrhoids was as follows: grade I (n=6, 16%); grade II (n=28, 69%) and grade III (n=6; 15%). All patients had percutaneous embolization of the SRA with metallic coils and synthetic polyvinyl alcohol particles. Follow-up evaluation included clinical examination, rectoscopy, histopathological analysis of rectal mucosa, duplex Doppler blood flow quantification, electromyography, sphincterometry of the anal sphincter and analysis of patient satisfaction. No immediate complications were observed and no patients had anal pain syndrome after embolization. Hemorrhoids showed a 43% size reduction after embolization (Phemorrhoids and 32/34 patients (94%) with grades I-II hemorrhoids. One month after embolization, anal sphincter contractility normalized and no changes in anal electromyography were observed. Blood flow in the hemorrhoidal plexus dropped from 109±1.2ml/min/100g (SD) before treatment to 60.2±4.4ml/min/100g (SD) (Phemorrhoids. Short-term results with regard to symptom management for hemorrhoidal disease are very encouraging and should stimulate further prospective and multicenter studies. Copyright © 2016 Editions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Leakage and scattered radiation from hand-held dental x-ray unit

Energy Technology Data Exchange (ETDEWEB)

Kim, Eun Kyung [Dankook Univ. School of Dentistry, Seoul (Korea, Republic of)

2007-06-15

To compare the leakage and scattered radiation from hand-held dental X-ray unit with radiation from fixed dental X-ray unit. For evaluation we used one hand-held dental X-ray unit and Oramatic 558 (Trophy Radiologie, France), a fixed dental X-ray unit. Doses were measured with Unfors Multi-O-Meter 512L at the right and left hand levels of X-ray tube head part for the scattered and leakage radiation when human skull DXTTR {iota}{iota}{iota} was exposed to both dental X-ray units. And for the leakage radiation only, doses were measured at the immediately right, left, superior and posterior side of the tube head part when air was exposed. Exposure parameters of hand-held dental X-ray unit were 70 kVp, 3 mA , 0.1 second, and of fixed X-ray unit 70 kVp, 8 mA, 0.45 second. The mean dose at the hand level when human skull DXTTR {iota}{iota}{iota} was exposed with portable X-ray unit 6.39 {mu}Gy, and the mean dose with fixed X-ray unit 3.03 {mu}Gy (p<0.001). The mean dose at the immediate side of the tube head part when air was exposed with portable X-ray unit was 2.97 {mu}Gy and with fixed X-ray unit the mean dose was 0.68 {mu}Gy (p<0.01). The leakage and scattered radiation from hand-held dental radiography was greater than from fixed dental radiography.

Prevalence and clinical significance of supra- or infraclavicular drainage on preoperative lymphoscintigraphy in women with breast cancer.

Science.gov (United States)

Tanaka, T; Sato, S; Tada, A; Inai, R; Taira, N; Doihara, H; Kanazawa, S

2016-06-01

Preoperative sentinel lymph node (SLN) mapping by lymphoscintigraphy is helpful to evaluate extra-axillary SLNs over a wider range than the blue dye method. However, the clinical value of extra-axillary SLNs remains uncertain. The goal of this study was to determine the prevalence and clinical significance of supra- or infraclavicular drainage on preoperative lymphoscintigraphy in women with breast cancer. We retrospectively reviewed the files of 942 consecutive breast cancer women who underwent preoperative lymphoscintigraphy for SLN biopsy at our institution between April 2004 and March 2015. Supra- or infraclavicular drainage was detected in 5/942 women (0.5%) on preoperative lymphoscintigraphy. An axillary hot spot was detected in all five women, and a positive axillary SLN was detected in four women. Breast tumor locations were the upper inner or outer quadrants in four women and the lower outer quadrant in one woman. The median follow-up period was 75 months (mean: 92; range: 26-111 months). Recurrence outside the axilla was found in three (60%) women. The woman with a negative SLN status did not undergo adjuvant chemotherapy, but developed extra-axillary lymph node recurrence 3 years after primary surgery. No patient died of metastatic breast cancer at the last follow-up. The detection of the supra- or infraclavicular SLNs on lymphoscintigraphy may provide additional staging information to tailor individual treatment regimens with regard to the potential risk of recurrence or metastasis of breast cancer. Copyright © 2016 Editions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

The lower cranial nerves: IX, X, XI, XII.

Science.gov (United States)

Sarrazin, J-L; Toulgoat, F; Benoudiba, F

2013-10-01

The lower cranial nerves innervate the pharynx and larynx by the glossopharyngeal (CN IX) and vagus (CN X) (mixed) nerves, and provide motor innervation of the muscles of the neck by the accessory nerve (CN XI) and the tongue by the hypoglossal nerve (CN XII). The symptomatology provoked by an anomaly is often discrete and rarely in the forefront. As with all cranial nerves, the context and clinical examinations, in case of suspicion of impairment of the lower cranial nerves, are determinant in guiding the imaging. In fact, the impairment may be located in the brain stem, in the peribulbar cisterns, in the foramens or even in the deep spaces of the face. The clinical localization of the probable seat of the lesion helps in choosing the adapted protocol in MRI and eventually completes it with a CT-scan. In the bulb, the intra-axial pathology is dominated by brain ischemia (in particular, with Wallenberg syndrome) and multiple sclerosis. Cisternal pathology is tumoral with two tumors, schwannoma and meningioma. The occurrence is much lower than in the cochleovestibular nerves as well as the leptomeningeal nerves (infectious, inflammatory or tumoral). Finally, foramen pathology is tumoral with, outside of the usual schwannomas and meningiomas, paragangliomas. For radiologists, fairly hesitant to explore these lower cranial pairs, it is necessary to be familiar with (or relearn) the anatomy, master the exploratory technique and be aware of the diagnostic possibilities. Copyright © 2013 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Protocol optimization of sacroiliac joint MR Imaging at 3 Tesla: Impact of coil design and motion resistant sequences on image quality.

Science.gov (United States)

Gondim Teixeira, P A; Bravetti, M; Hossu, G; Lecocq, S; Petit, D; Loeuille, D; Blum, A

2017-12-01

To evaluate the impact of coil design and motion-resistant sequences on the quality of sacroiliac magnetic resonance imaging (MRI) examination in patients with spondyloarthropathy. One hundred and twenty-one patients with suspected sacroiliitis and referred for MRI of the sacroiliac joints were retrospectively evaluated with MRI at 3-Tesla. There were 78 women and 43 men with a mean age of 36.7±11.5 (SD) years (range: 15.8-78.4 years). Conventional and motion-resistant fat-saturated fast-spin echo T2-weighted sequences were performed with two different coils. Image quality was subjectively evaluated by two independent readers (R1 and R2) using a four-point scale. Confidence in the identification of bone marrow edema pattern (BMEP) was also evaluated subjectively using a three-point scale. Phased array body coil yielded improved image quality compared to surface coil (14.1 to 30.4% for R1 and 14.6 to 25.7% for R2; Pcoil with motion-resistant T2-weighted sequence (kappa 0.990). The smallest number of indeterminate BMEP zones was seen on MRI set acquired with the phased-array body coil and motion-resistant T2-weighted sequence. Phased array body coil and motion-resistant T2-weighted sequences perform better than surface coil and conventional T2-weighted sequences for the evaluation of sacroiliac joints, increasing confidence in the identification of BMEP. Copyright © 2017 Editions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Radiological evaluation of the fetal face using three-dimensional ultrasound imaging

Directory of Open Access Journals (Sweden)

Bäumler M

2012-12-01

Full Text Available Marcel Bäumler,1–3 Michèle Bigorre,1,4 Jean-Michel Faure1,51CHU Montpellier, Centre de Compétence des Fentes Faciales, Hôpital Lapeyronie, Montpellier, 2Clinique du Parc, Imagerie de la Femme, Castelnau-le-Lez, 3Cabinet de Radiologie du Trident, Lunel, 4CHU Service de Chirurgie Plastique Pédiatrique, Hôpital Lapeyronie, Montpellier, 5CHU Montpellier, Service de Gynécologie-Obstétrique, Hôpital Arnaud de Villeneuve, Montpellier, FranceAbstract: This paper reviews screening and three-dimensional diagnostic ultrasound imaging of the fetal face. The different techniques available for analyzing biometric and morphological items of the profile, eyes, ears, lips, and hard and soft palate are commented on and briefly compared with the respective bi-dimensional techniques. The available literature supports the use of three-dimensional ultrasound in difficult prenatal diagnostic conditions because of its diagnostic accuracy, enabling improved safety of perinatal care. Globally, a marked increase has been observed in the accuracy of three-dimensional ultrasound in comparison with the bi-dimensional approach. Because there is no consensus about the performance of the different three-dimensional techniques, future studies are needed in order to compare them and to find the best technique for analysis of each of the respective facial elements. Universal prenatal standards may integrate these potential new findings in the future. At this time, the existing guidelines for prenatal facial screening should not be changed.Keywords: prenatal three-dimensional ultrasound, prenatal screening, prenatal diagnosis, cleft lip and palate, fetal profile, retrognathism

Diffusion-weighted MR imaging of the normal pancreas: reproducibility and variations of apparent diffusion coefficient measurement at 1.5- and 3.0-Tesla.

Science.gov (United States)

Barral, M; Soyer, P; Ben Hassen, W; Gayat, E; Aout, M; Chiaradia, M; Rahmouni, A; Luciani, A

2013-04-01

To evaluate reproducibility and variations in apparent diffusion coefficient (ADC) measurement in normal pancreatic parenchyma at 1.5- and 3.0-Tesla and determine if differences may exist between the four pancreatic segments. Diffusion-weighted MR imaging of the pancreas was performed at 1.5-Tesla in 20 patients and at 3.0-Tesla in other 20 patients strictly matched for gender and age using the same b values (0, 400 and 800s/mm(2)). Two independent observers placed regions of interest within the four pancreatic segments to measure ADC at both fields. Intra- and inter-observer agreement in ADC measurement was assessed using Bland-Altman analysis and comparison between ADC values obtained at both fields using non-parametrical tests. There were no significant differences in ADC between repeated measurements and between ADC obtained at 1.5-Tesla and those at 3.0-Tesla. The 95% limits of intra-observer agreement between ADC were 2.3%-22.7% at 1.5-Tesla and 1%-24.2% at 3.0-Tesla and those for inter-observer agreement between 1.9%-14% at 1.5-Tesla and 8%-25% at 3.0-Tesla. ADC values were similar in all pancreatic segments at 3.0-T whereas the tail had lower ADC at 1.5-Tesla. ADC measurement conveys high degrees of intra- and inter-observer reproducibility. ADC have homogeneous distribution among the four pancreatic segments at 3.0-Tesla. Copyright © 2012 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Systems integration (automation system). System integration (automation system)

Energy Technology Data Exchange (ETDEWEB)

Fujii, K; Komori, T; Fukuma, Y; Oikawa, M [Nippon Steal Corp., Tokyo (Japan)

1991-09-26

This paper introduces business activities on an automation systems integration (SI) started by a company in July,1988, and describes the SI concepts. The business activities include, with the CIM (unified production carried out on computers) and AMENITY (living environment) as the mainstays, a single responsibility construction ranging from consultation on structuring optimal systems for processing and assembling industries and intelligent buildings to system design, installation and after-sales services. With an SI standing on users {prime} position taken most importantly, the business starts from a planning and consultation under close coordination. On the conceptual basis of structuring optimal systems using the ompany {prime}s affluent know-hows and tools and adapting and applying with multi-vendors, open networks, centralized and distributed systems, the business is promoted with the accumulated technologies capable of realizing artificial intelligence and neural networks in its background, and supported with highly valuable business results in the past. 10 figs., 1 tab.

94th German Roentgen congress. Program and abstracts; 94. Deutscher Roentgenkongress ''Radiologie ist Zukunft''. Vollstaendiges Kongressprogramm und Abstracts der wissenschaftlichen Beitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-05-15

The volume includes the abstracts of the 94th German Roentgen congress concerning the following topics: Interventional oncology; mammary carcinoma; medical care and imaging; news in radio-oncology; regional therapy of lung malign tumors; medical ontology intelligent searching strategy; image fusion; oncology - imaging in screening; cardiovascular emergency - an update; innovations in the physics of radiology; risk management and budget; mobile computing; mammary diagnostics; elucidation and liability benchmarking in radiology; cost and performance in the medical office; research: innovation or self-purpose; cost refunding PET/CT and MRT PET; economic strategy in health care; options of radiological practice in medical offices and hospitals; trends in imaging; radiological diagnostics in emergency cases; X-ray regulations; neuroradiology; muscuskeletal radiology; chest radiology; pediatric radiology, radiation protection for the medical personnel.

Patients and personnel radiation protection in interventional radiology and in surgery;La radioprotection des patients et des travailleurs en radiologie interventionnelle et au bloc operatoire

Energy Technology Data Exchange (ETDEWEB)

Menechal, P. [Centre de Recherches en Psychopathologie et Psychologie Clinique - CRPPC, 69 - Lyon (France); Valero, M.; Godet, J.L. [Lyon-3 Univ. Jean Moulin, 69 (France)

2009-10-15

The development of the interventional radiology and acts realised under radiological guiding is a real benefit for patients. The doses delivered can however, generate important detriments (determinist effects). the patients and the personnel are exposed to important doses, heterogeneous and very different doses according the operator, the patient morphology and the treated pathology. This theme is considered by the the nuclear safety Authority as a priority in the medical medium. (N.C.)

Evaluation of conventional and digital radiography capacities for distinguishing dental materials on radiograms depending on the present radiopacifying agent

Directory of Open Access Journals (Sweden)

Antonijević Đorđe

2014-01-01

Full Text Available Bacgroun/Aim. The radiopacity of an endodontic material can considerably vary as measured on film and a digital sensor. Digital radiography offers numerous advantages over convential film-based radiography in dental clinical practice regarding both diagnostic capabilities and postintervention procedures. The aim of this study was to investigate the capacity of conventional and charge-conpled device (CCD based digital radiography to detect material on radiograph depending on the radio-pacifying agent present in the material. Methods. Experimental cements were formulated by mixing Portland cement with the following radiopacifying agents: zinc oxide (ZnO, zirconium oxide (ZrO2, titanium dioxide (TiO2, barium sulphate (BaSO4, iodoform (CHI3, bismuth oxide (Bi2O3 and ytterbium trifluoride (YbF3. In addition, 5 endodontic materials comprising Endomethasone®, Diaket®, N2®, Roth 801® and Acroseal® were investigated to serve as control. Per three specimens of each material were radiographed alongside an aluminum step wedge on film (Eastman Kodak Company®, Rochester, NY and a CCD-based digital sensor (Trophy Radiologie®, Cedex, France. Radiopacity values were calculated by converting the radiographic densities of the specimens expressed as a mean optical densities or mean grey scale values into equivalent thickness of aluminum. Results. Twoway ANOVA detected no significant differences with respect to the imaging system (p > 0.05, but the differences were significant with respect to radiopacifier (p < 0.001 and the interaction of the two factors (p < 0.05. Paired ttest revealed significant differences between the methods used for pure Portland cement, all concentrations of BaSO4 and CHI3, 10% and 20% additions of ZrO2 and Bi2O3 and 10% and 30% addition of YbF3 (p < 0.05. Conclusion. The materials which incorporate CHI3 or BaSO4 as radiopacifying agents are expected to be significantly more radiopaque on a digital sensor than on film. During clinical

Osler's disease; Morbus Osler

Energy Technology Data Exchange (ETDEWEB)

Ahlhelm, F.; Mueller, U. [Kantonsspital Baden AG, Institut fuer Radiologie, Baden (Switzerland); Lieb, J. [Universitaetsspital Basel, Klinik fuer Radiologie und Nuklearmedizin, Basel (Switzerland); Schneider, G. [Universitaetskliniken des Saarlandes, Klinik fuer Diagnostische und Interventionelle Radiologie, Homburg/Saar (Germany); Ulmer, S. [Medizinisch-Radiologisches Institut, Zuerich (Switzerland)

2013-12-15

Osler's disease, also known as hereditary hemorrhagic telangiectasia (HHT) and Osler-Weber-Rendu syndrome, is an autosomal dominant disorder leading to abnormal blood vessel formation in the skin, mucous membranes and often in organs, such as the lungs, liver and brain (arteriovenous malformations AVM). Various types are known. Patients may present with epistaxis. Teleangiectasia can be identified by visual inspection during physical examination of the skin or oral cavity or by endoscopy. Diagnosis is made after clinical examination and genetic testing based on the Curacao criteria. Modern imaging modalities, such as computed tomography (CT) or magnetic resonance imaging (MRI) have become more important as they can depict the AVMs. Pulmonary AVMs can be depicted in CT imaging even without the use of a contrast agent while other locations including the central nervous system (CNS) usually require administration of contrast agents. Knowledge of possible clinical manifestations in various organs, possible complications and typical radiological presentation is mandatory to enable adequate therapy of these patients. Interventional procedures are becoming increasingly more important in the treatment of HHT patients. (orig.) [German] Der Mobus Osler (Synonyme: hereditaere haemorrhagische Teleangiektasie [HHT], Morbus Rendu-Osler-Weber) ist eine Multisystemerkrankung und gehoert zur Gruppe der vaskulaeren haemorrhagischen Erkrankungen. Bei der autosomal dominanten Erkrankung, die zu den haeufigsten Phakomatosen zaehlt, kann je nach Gendefekt zwischen verschiedenen Formen, die zu einer Stoerung der Blutgefaessbildung fuehren, unterschieden werden. Neben der genetischen Diagnostik und der klinischen Untersuchung sind bildgebende Verfahren entscheidend fuer die Diagnose. Klinisch stehen die Epistaxis, mukokutane Teleangiektasien und viszerale arteriovenoese Malformationen (AVM) v. a. in Lunge, Leber und Hirn sowie die Folgen dieser Gefaesspathologien wie z. B

Dynamic contrast-enhanced MR imaging of the rectum: Correlations between single-section and whole-tumor histogram analyses.

Science.gov (United States)

Choi, M H; Oh, S N; Park, G E; Yeo, D-M; Jung, S E

2018-05-10

To evaluate the interobserver and intermethod correlations of histogram metrics of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) parameters acquired by multiple readers using the single-section and whole-tumor volume methods. Four DCE parameters (K trans , K ep , V e , V p ) were evaluated in 45 patients (31 men and 14 women; mean age, 61±11 years [range, 29-83 years]) with locally advanced rectal cancer using pre-chemoradiotherapy (CRT) MRI. Ten histogram metrics were extracted using two methods of lesion selection performed by three radiologists: the whole-tumor volume method for the whole tumor on axial section-by-section images and the single-section method for the entire area of the tumor on one axial image. The interobserver and intermethod correlations were evaluated using the intraclass correlation coefficients (ICCs). The ICCs showed excellent interobserver and intermethod correlations in most of histogram metrics of the DCE parameters. The ICCs among the three readers were > 0.7 (Phistogram metrics, except for the minimum and maximum. The intermethod correlations for most of the histogram metrics were excellent for each radiologist, regardless of the differences in the radiologists' experience. The interobserver and intermethod correlations for most of the histogram metrics of the DCE parameters are excellent in rectal cancer. Therefore, the single-section method may be a potential alternative to the whole-tumor volume method using pre-CRT MRI, despite the fact that the high agreement between the two methods cannot be extrapolated to post-CRT MRI. Copyright © 2018 Société française de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Evaluation of tumor response to intra-arterial chemoembolization of hepatocellular carcinoma: Comparison of contrast-enhanced ultrasound with multiphase computed tomography.

Science.gov (United States)

Paul, S B; Dhamija, E; Gamanagatti, S R; Sreenivas, V; Yadav, D P; Jain, S; Shalimar; Acharya, S K

2017-03-01

To compare the diagnostic accuracy of contrast-enhanced ultrasound (CEUS) with that of multiphase computed tomography (CT) in the evaluation of tumor response to transarterial chemoembolization (TACE) of hepatocellular carcinoma (HCC). Fifty patients (41 men, 9 women; mean age, 53 years±12.5 [SD]) with a total of 70 HCCs (mean size, 5cm±3 [SD]) were evaluated. Post-TACE therapeutic assessment of HCC was done at 4 weeks. Patients with TACE done earlier and reporting with suspicion for recurrence were also included. Patients with hepatic masses seen on ultrasound were enrolled and subjected to CEUS, multiphase CT and magnetic resonance imaging (MRI). Hyperenhancing area at the tumor site on arterial phase of CEUS/multiphase CT/MRI was termed as residual disease (RD), the patterns of which were described on CEUS. Diagnostic accuracies of CEUS and MPCT were compared to that of MRI that was used as the reference standard. CEUS detected RD in 43/70 HCCs (61%). RD had a heterogeneous pattern in 22/43 HCCs (51%). Sensitivities of CEUS and multiphase CT were 94% (34/36; 95% CI: 81-99%) and 50% (18/36; 95% CI: 33-67%) respectively. Significant difference in sensitivity was found between CEUS and multiphase CT (P=0.0001). CEUS and multiphase CT had 100% specificity (95% CI: 83-100%). CEUS is a useful technique for detecting RD in HCC after TACE. For long term surveillance, CEUS should be complemented with multiphase CT/MRI for a comprehensive evaluation. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Dynamic MR defecography of the posterior compartment: Comparison with conventional X-ray defecography.

Science.gov (United States)

Poncelet, E; Rock, A; Quinton, J-F; Cosson, M; Ramdane, N; Nicolas, L; Feldmann, A; Salleron, J

2017-04-01

The goal of this study was to compare conventional X-ray defecography and dynamic magnetic resonance (MR) defecography in the diagnosis of pelvic floor prolapse of the posterior compartment. Fifty women with a mean age of 65.5 years (range: 53-72 years) who underwent X-ray defecography and MR defecography for clinical suspicion of posterior compartment dysfunction, were included in this retrospective study. X-ray defecography and dynamic MR defecography were reviewed separately for the presence of pelvic organ prolapse. The results of the combination of X-ray defecography and MR defecography were used as the standard of reference. Differences in sensitivities between X-ray defecography and MR defecography were compared using the McNemar test. With the gold standard, we evidenced a total of 22 cases of peritoneocele (17 elytroceles, 3 hedroceles and 2 elytroceles+hedroceles), including 15 cases of enterocele, 28 patients with rectocele including 16 that retained contrast, 37 cases of rectal prolapse, and 11 cases of anismus. The sensitivities of X-ray defecography were 90.9% for the diagnosis of peritoneocele, 71.4% for rectocele, 81.1% for rectal prolapse and 63.6% for anismus. The sensitivities of MR defecography for the same diagnoses were 86.4%, 78.6%, 62.2% and 63.6%, respectively. For all these pathologies, no significant differences between X-ray defecography and MR defecography were found. Dynamic MR defecography is equivalent to X-ray defecography for the diagnosis of abnormalities of the posterior compartment of the pelvic floor. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

CT fluoroscopy-guided core needle biopsy of anterior mediastinal masses.

Science.gov (United States)

Iguchi, T; Hiraki, T; Matsui, Y; Fujiwara, H; Sakurai, J; Masaoka, Y; Uka, M; Tanaka, T; Gobara, H; Kanazawa, S

2018-02-01

To retrospectively evaluate the safety, diagnostic yield, and risk factors of diagnostic failure of computed tomography (CT) fluoroscopy-guided biopsies of anterior mediastinal masses. Biopsy procedures and results of anterior mediastinal masses in 71 patients (32 women/39 men; mean [±standard deviation] age, 53.8±20.0years; range, 14-88years) were analyzed. Final diagnoses were based on surgical outcomes, imaging findings, or clinical follow-up findings. The biopsy results were compared with the final diagnosis, and the biopsy procedures grouped by pathologic findings into diagnostic success and failure groups. Multiple putative risk factors for diagnostic failure were then assessed. Seventy-one biopsies (71 masses; mean size, 67.5±27.3mm; range 8.6-128.2mm) were analyzed. We identified 17 grade 1 and one grade 2 adverse events (25.4% overall) according to the National Cancer Institute Common Terminology Criteria for Adverse Events version 4.0. Sixty-nine biopsies (97.2%) provided samples fit for pathologic analysis. Diagnostic failure was found for eight (11.3%) masses; the 63 masses diagnosed successfully included thymic carcinoma (n=17), lung cancer (n=14), thymoma (n=12), malignant lymphoma (n=11), germ cell tumor (n=3), and others (n=6). Using a thinner needle (i.e., a 20-gauge needle) was the sole significant risk factor for diagnostic failure (P=0.039). CT fluoroscopy-guided biopsy of anterior mediastinal masses was safe and had a high diagnostic yield; however, using a thinner biopsy needle significantly increased the risk of a failed diagnosis. Copyright © 2017 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Mechanisms of Günther Tulip filter tilting during transfemoral placement.

Science.gov (United States)

Matsui, Y; Horikawa, M; Ohta, K; Jahangiri Noudeh, Y; Kaufman, J A; Farsad, K

The purpose of this study was to characterize the mechanisms of Günther Tulip filter (GTF) tilting during transfemoral placement in an experimental model with further validation in a clinical series. In an experimental study, 120 GTF placements in an inferior vena cava (IVC) model were performed using 6 configurations of pre-deployment filter position. The angle between the pre-deployment filter axis and IVC axis, and the proximity of the constrained filter legs to IVC wall prior to deployment were evaluated. The association of those pre-deployment factors with post-deployment filter tilting was analyzed. The association noted in the experimental study was then evaluated in a retrospective clinical series of 21 patients. In the experimental study, there was a significant association between the pre-deployment angle and post-deployment filter tilting (P<0.0001). With a low pre-deployment angle (≤5°), a significant association was noted between filter tilting and the proximity of the constrained filter legs to the far IVC wall (P=0.001). In a retrospective clinical study, a significant association between the pre-deployment angle and post-deployment filter tilting was also noted with a linear regression model (P=0.026). Significant association of the pre-deployment angle with post-deployment GTF tilting was shown in both the experimental and clinical studies. The experimental study also showed that proximity of filter legs is relevant when pre-deployment angle is small. Addressing these factors may result in a lower incidence of filter tilting. Copyright © 2017 Editions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Coupling component systems towards systems of systems

OpenAIRE

Autran , Frédéric; Auzelle , Jean-Philippe; Cattan , Denise; Garnier , Jean-Luc; Luzeaux , Dominique; Mayer , Frédérique; Peyrichon , Marc; Ruault , Jean-René

2008-01-01

International audience; Systems of systems (SoS) are a hot topic in our "fully connected global world". Our aim is not to provide another definition of what SoS are, but rather to focus on the adequacy of reusing standard system architecting techniques within this approach in order to improve performance, fault detection and safety issues in large-scale coupled systems that definitely qualify as SoS, whatever the definition is. A key issue will be to secure the availability of the services pr...

Digital processing data communication systems (bus systems). Digitale Prozessdaten-Kommunikations-Systeme (Bus Systeme)

Energy Technology Data Exchange (ETDEWEB)

Fleck, K

1980-01-01

After an introduction to the technology of digital processing data communication systems there are the following chapters: digital communication of processing data in automation technology, the technology of biserial communication, the implementaiton of a bus system, the data transmission of the TDC-2000 system of Honeywell's and the process bus CS 275 in the automation system TELEPERM M of Siemens AG.

Protecting information in systems of systems

NARCIS (Netherlands)

Trivellato, D.

2012-01-01

Systems of systems are coalitions of autonomous and heterogeneous systems that collaborate to achieve a common goal. The component systems of a system of systems often belong to different security domains, which are governed by different authorities (hereafter called parties). Furthermore, systems

Ewing's sarcoma, fibrogenic tumors, giant cell tumor, hemangioma of bone. Radiology and pathology; Ewing-Sarkom, fibrogene Tumoren, Riesenzelltumor, Haemangiom des Skeletts. Radiologie und Pathologie

Energy Technology Data Exchange (ETDEWEB)

Freyschmidt, J. [Beratungsstelle und Referenzzentrum fuer Osteoradiologie, Bremen (Germany); Ostertag, H. [Klinikum Region Hannover GmbH, Pathologisches Institut, Hannover (Germany)

2016-06-15

Radiological imaging only reflects the anatomy and its pathological abnormalities. Therefore, the radiologist should be able to recognize the basic features of the pathological anatomy of bone tumors. This can only be learned working closely with a pathologist who is experienced in this field. On the other hand, the pathologist needs from the radiologist their diagnostic assessment with information on size, location, aggressiveness and the existence of a bone tumor's matrix, of the whole lesion, because he usually only receives a small part for examination in the form of a biopsy. In this article, the features and fundamentals (standards) of radiological-pathological cooperation as the mainstay for a precise diagnosis in bone tumors are outlined. The radiological appearance and the histopathological features behind it are presented for Ewing's sarcoma, fibrogenic tumors, giant cell tumor, and hemangioma of the bone. (orig.) [German] Radiologische Bilder spiegeln nichts anderes als die Anatomie und ihre pathologischen Abweichungen wider. Deshalb sollte der Radiologe die Grundzuege der pathologischen Anatomie auch von Knochentumoren kennen. Das kann er nur durch eine enge Zusammenarbeit mit einem auf diesem Gebiet erfahrenen Pathologen erlernen. Andererseits braucht der Pathologe vom Radiologen dessen diagnostische Einschaetzung mit Informationen ueber die Groesse, Lage, Aggressivitaet und das Vorhandensein einer Matrix eines Knochentumors und zwar von der gesamten Laesion, denn er bekommt inform einer Biopsie i. d. R. nur einen mehr oder weniger kleinen Teil zur Untersuchung. In diesem Beitrag werden die Grundzuege und Standards der radiologisch-pathologischen Zusammenarbeit aufgezeigt, auf denen eine praezise Diagnosestellung beruht. Radiologisches Erscheinungsbild und die dahintersteckenden - und erklaerenden - histopathologischen Merkmale werden fuer das Ewing-Sarkom, fuer fibrogene Tumoren, den Riesenzelltumor und das Haemangiom des Knochens praesentiert. (orig.)

A feasibility inquiry on the radiodermatitis secondary to an interventional radiology act;Une enquete de faisabilite sur les radiodermites secondaires a un geste de radiologie interventionnelle

Energy Technology Data Exchange (ETDEWEB)

Roudier, C.; Pirard, Ph.; Donadieu, J. [Institut de veille sanitaire, Saint-Maurice (France)

2006-04-15

The radiodermatitis is a burning of skin tissue and subcutaneous tissue in relation with ionizing radiation. In the medical practice, outside radiotherapy excluded of our study, it is observed only with acts of interventional radiology. The consequences of a radiodermatitis can be aesthetic, with appearance of a scar or a definitive alopecia, functional with loss of substance needing sometimes a remedial surgical act and finally oncologic with a risk of localised skin cancer. A radiodermatitis can appear with a radiation dose of 2 grays and its intensity worsens with the dose. Since the late 1970's about 200 cases of radiodermatitis have been reported. the most of cases have been reported between 1993 and 2000 and less than ten cases have been reported since 2000, suggesting a possible reduction of incidence explainable by a concomitant improvement of technological quality of the equipment. In order to confirm this eventual trend az feasibility study has been organised and is reported in this article. Given the results, this complication is still existing. In spite of the small number of observed cases, it is to notice that every procedures of interventional radiology are concerned. The preliminary character of this study encourages the institute of Health surveillance to work on the elaboration of a program of radiodermatitis surveillance. It could be associated to actions of improvement of the prevention and follow-up of patients, of feedback, and making easy an optimization of the practices. (N.C.)

Data Systems vs. Information Systems

OpenAIRE

Amatayakul, Margret K.

1982-01-01

This paper examines the current status of “hospital information systems” with respect to the distinction between data systems and information systems. It is proposed that the systems currently existing are incomplete data dystems resulting in ineffective information systems.

Situation awareness with systems of systems

CERN Document Server

Tretmans, Jan; Borth, Michael

2013-01-01

This book discusses various aspects, challenges, and solutions for developing systems-of-systems for situation awareness, using applications in the domain of maritime safety and security.  Topics include advanced, multi-objective visualization methods for situation awareness, stochastic outlier selection, rule-based anomaly detection, an ontology-based event model for semantic reasoning, new methods for semi-automatic generation of adapters bridging communication gaps, security policies for systems-of-systems, trust assessment, and methods to deal with the dynamics of systems-of-systems in run-time monitoring, testing, and diagnosis. Architectural considerations for designing information-centric systems-of-systems such as situation awareness systems, and an integrated demonstrator implementing many of the investigated aspects, complete the book.

Intelligent Control Systems with an Introduction to System of Systems Engineering

CERN Document Server

Nanayakkara, Thrishantha

2009-01-01

From aeronautics and manufacturing to healthcare and disaster management, systems engineering (SE) focuses on designing applications that ensure performance optimization. This title integrates the fundamentals of artificial intelligence and systems control in a framework applicable to both simple dynamic systems and large-scale system of systems

Upgraded RECOVER system - CASDAC system

International Nuclear Information System (INIS)

Yamamoto, Yoichi; Koyama, Kinji

1992-03-01

The CASDAC (Containment And Surveillance Data Authenticated Communication) system has been developed by JAERI for nuclear safeguards and physical protection of nuclear material. This system was designed and constructed as an upgraded RECOVER system, design concept of which was based on the original RECOVER system and also the TRANSEAVER system. Both of them were developed several years ago as a remote monitoring system for continual verification of security and safeguards status of nuclear material. The system consists of two subsystems, one of them is a Grand Command Center (GCC) subsystem and the other is a facility subsystem. Communication between the two subsystems is controlled through the international telephone line network. Therefore all communication data are encrypted to prevent access by an unauthorized person who may intend to make a falsification, or tapping. The facility subsystem has an appropriate measure that ensure data security and reliable operation under unattended mode of operator. The software of this system is designed so as to be easily used in other different types of computers. This report describes the outline of the CASDAC system and the results of its performance test. This work has been carried out in the framework of Japan Support Programme for Agency Safeguards (JASPAS) as a project, JA-1. (author)

System design specification Brayton Isotope Power System (BIPS) Flight System (FS), and Ground Demonstration System (GDS)

International Nuclear Information System (INIS)

1976-01-01

The system design specification for ground demonstration, development, and flight qualification of a Brayton Isotope Power System (BIPS) is presented. The requirements for both a BIPS conceptual Flight System (FS) and a Ground Demonstration System (GDS) are defined

Profiling Systems Using the Defining Characteristics of Systems of Systems (SoS)

Science.gov (United States)

2010-02-01

system exhaust and emissions system gas engine heating and air conditioning system fuel system regenerative braking system safety system...overcome the limitations of these fuzzy scales, measurement scales are often divided into a relatively small number of disjoint categories so that the...precision is not justified. This lack of precision can typically be addressed by breaking the measurement scale into a set of categories , the use of

Superspeed Maglev system Transrapid. System decription

Energy Technology Data Exchange (ETDEWEB)

Miller, L [Thyssen Henschel AG,, Maglev Transportation Technology, Muenchen (Germany)

1996-12-31

The superspeed maglev system Transrapid is a track-bound transportation system for passengern and priority freight transport. The transrapid trainsets are composed of self-sufficient vehicle section coupled together. The superspeed maglev system Transrapid is capable of revenue operation at speeds of 100 to 500 km/h. Besides the description of the system concept and system characteristics safety and availability are discussed. (HW)

Linking Political Systems and War Systems

DEFF Research Database (Denmark)

Harste, Gorm

2009-01-01

Decisive parts of the Western political system have demonstrated a seemingly surprising misinterpretation of military might. As Madelaine Albright has suggested, the mighty perceived themselves as "almighty". Political power seems to have invested in instrumental coercive power relations and found...... military coercion to be the appropriate mean. Using the system theory and the theory of systemic risks displayed by the German sociologist Niklas Luhmann the article demonstrates how military systems due to their own autonomy and autopoiesis do not fit into the idea of political government....... The Clausewitzian ideal of a political system that could continue its power games by means of war was moderated by Clausewitz' own analysis of "friction". How can a political system be so blind towards the possibilities of another system? What are the risks of systemic blind spots? The argument of the paper...

From systems biology to systems biomedicine.

Science.gov (United States)

Antony, Paul M A; Balling, Rudi; Vlassis, Nikos

2012-08-01

Systems Biology is about combining theory, technology, and targeted experiments in a way that drives not only data accumulation but knowledge as well. The challenge in Systems Biomedicine is to furthermore translate mechanistic insights in biological systems to clinical application, with the central aim of improving patients' quality of life. The challenge is to find theoretically well-chosen models for the contextually correct and intelligible representation of multi-scale biological systems. In this review, we discuss the current state of Systems Biology, highlight the emergence of Systems Biomedicine, and highlight some of the topics and views that we think are important for the efficient application of Systems Theory in Biomedicine. Copyright © 2011 Elsevier Ltd. All rights reserved.

Computer System Design System-on-Chip

CERN Document Server

Flynn, Michael J

2011-01-01

The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses th

The systems integration modeling system

International Nuclear Information System (INIS)

Danker, W.J.; Williams, J.R.

1990-01-01

This paper discusses the systems integration modeling system (SIMS), an analysis tool for the detailed evaluation of the structure and related performance of the Federal Waste Management System (FWMS) and its interface with waste generators. It's use for evaluations in support of system-level decisions as to FWMS configurations, the allocation, sizing, balancing and integration of functions among elements, and the establishment of system-preferred waste selection and sequencing methods and other operating strategies is presented. SIMS includes major analysis submodels which quantify the detailed characteristics of individual waste items, loaded casks and waste packages, simulate the detailed logistics of handling and processing discrete waste items and packages, and perform detailed cost evaluations

System specifications for the NDS Dictionary System

International Nuclear Information System (INIS)

Attree, P.M.; Smith, P.M.

1979-09-01

The NDS Dictionary System is a computerized system for maintaining and distributing the EXFOR dictionaries and for preparing internal versions of these dictionaries for use in the NDS EXFOR System and other NDS systems. This document is an internal manual for the system specifications of the NDS Dictionary System. It includes flow charts, system and program summaries, input and output specifications and file and record descriptions. This manual is updated from time to time when system modifications are made; this is the version of January 1979

Protecting Information in Systems of Systems

NARCIS (Netherlands)

Trivellato, Daniel; Zannone, Nicola; Etalle, Sandro

2011-01-01

Systems of Systems (SoS) are dynamic, distributed coalitions of autonomous and heterogeneous systems that collaborate to achieve a common goal. While offering several advantages in terms of scalability and flexibility, the SoS paradigm has a strong impact on system interoperability and on the

Vertebroplasty - state of the art; Vertebroplastie - ''state of the art''

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, K. [Akademisches Lehrkrankenhaus der Rheinischen Friedrich-Wilhelms-Universitaet Bonn, Radiologie und Nuklearmedizin, Johanniter-Krankenhaus - Johanniter GmbH, Bonn (Germany)

2015-10-15

Percutaneous vertebroplasty (PVP) using PMMA (polymethyl methacrylate) was first described in 1987 by Gallibert and Deramond for the treatment of vertebral body instability in patients with aggressive forms of vertebral hemangioma. Other types of painful osteolytic bone lesions, such as osteoporotic vertebral fractures and vertebral metastasis are in the meantime more commonly treated using this method. Within the last few years, this technique has become widely accepted and it is proposed for osteolytic bone lesions in areas that are more difficult to approach surgically, e.g., the pelvis and sacrum. Rapid pain relief and resulting stability have conferred an important role upon osteoplasty especially in palliative tumor-treatment for patients with shortened expected life spans. In addition, combined treatment of painful osteolytic metastases with image-guided thermoablation and percutaneous cement injection has been shown to be a safe palliative modality in the therapy of nonresectable tumors. (orig.) [German] Die Vertebroplastie ist ein minimal-invasives Verfahren, bei dem unter Durchleuchtung oder im CT Knochenzement mithilfe einer Hohlnadel in einen schmerzhaften Wirbelkoerper eingebracht wird. Die Technik wurde initial zur Behandlung aggressiver Wirbelkoerperhaemangiome beschrieben. Inzwischen stellen andere schmerzhafte Wirbelkoerperprozesse, vornehmlich osteolytische Metastasen sowie osteoporotische Wirbelkoerperfrakturen die haeufigsten Indikationen zur Durchfuehrung einer Vertebroplastie dar. Methode und Technik der Zementapplikation werden zwischenzeitlich erfolgreich auch bei ausserhalb der Wirbelsaeule bestehenden gutartigen Pathologien, z. B. bei Ermuedungsfrakturen des Os sacrum in Form der Sakroplastie sowie insbesondere schmerzhaften, metastatisch-osteolytischen Befunden als palliative Therapiemassnahme (Osteoplastie) eingesetzt. Im Rahmen palliativer Therapiekonzepte wird die Vertebroplastie in der Radiologie zunehmend in Kombination mit

Incidental findings in chest X-rays; Zufallsbefunde im Roentgenthorax

Energy Technology Data Exchange (ETDEWEB)

Wielpuetz, M.O.; Kauczor, H.U. [Universitaetsklinikum Heidelberg, Klinik fuer Diagnostische und Interventionelle Radiologie, Heidelberg (Germany); Universitaet Heidelberg, Translational Lung Research Center (TLRC), Deutsches Zentrum fuer Lungenforschung (DZL), Heidelberg (Germany); Universitaetsklinikum Heidelberg, Klinik fuer Diagnostische und Interventionelle Radiologie mit Nuklearmedizin, Thoraxklinik, Heidelberg (Germany); Weckbach, S. [Universitaetsklinikum Heidelberg, Klinik fuer Diagnostische und Interventionelle Radiologie, Heidelberg (Germany); Universitaet Heidelberg, Translational Lung Research Center (TLRC), Deutsches Zentrum fuer Lungenforschung (DZL), Heidelberg (Germany)

2017-04-15

Conventional projection radiography (chest x-ray) is one of the most frequently requested procedures in radiology. Even though chest x-ray imaging is frequently performed in asymptomatic patients for preoperative assessment, clinically relevant incidental findings are relatively scarce. This is due to the relatively low sensitivity of chest x-rays where few clinically relevant incidental findings are to be expected, as any detectable pathologies will as a rule already be clinically symptomatic. Recommendations from relevant societies for the management of incidental findings, apart from the clarification of incidental nodules, do not exist. This review article therefore describes the most frequent and typical incidental findings of lung parenchyma (apart from pulmonary nodules), mediastinal structures including the hilum of the lungs, pleura, chest wall and major vessels. Also described are those findings which can be diagnosed with sufficient certainty from chest x-rays so that further clarification is not necessary and those which must be further clarified by multislice imaging procedures or other techniques. (orig.) [German] Eine der haeufigsten Untersuchungen in der Radiologie ist die konventionelle Projektionsradiographie des Thorax (Roentgenthorax). Auch wenn projektionsradiographische Aufnahmen im Rahmen einer praeoperativen Abklaerung haeufig als orientierende Untersuchung angefertigt werden, sind - bedingt durch die relativ geringe Sensitivitaet des Roentgenthorax - wenig klinisch relevante Zufallsbefunde zu erwarten, da nachweisbare Pathologien in der Regel bereits auch klinisch apparent sind. Empfehlungen entsprechender Fachgesellschaften zu Zufallsbefunden im Roentgenthorax jenseits der Abklaerung von Rundherden liegen nicht vor. Die vorliegende Arbeit beleuchtet daher haeufige und typische Zufallsbefunde des Lungenparenchyms (ausser den Lungenrundherden), der mediastinalen Strukturen einschliesslich der Hili, der Pleura, der Thoraxwand sowie der

Predicting inferior vena cava (IVC) filter retrievability using positional parameters: A comparative study of various filter types.

Science.gov (United States)

Gotra, A; Doucet, C; Delli Fraine, P; Bessissow, A; Dey, C; Gallix, B; Boucher, L-M; Valenti, D

2018-05-14

To compare changes in inferior vena cava (IVC) filter positional parameters from insertion to removal and examine how they affect retrievability amongst various filter types. A total of 447 patients (260 men, 187 women) with a mean age of 55 years (range: 13-91 years) who underwent IVC filter retrieval between 2007-2014 were retrospectively included. Post-insertion and pre-retrieval angiographic studies were assessed for filter tilt, migration, strut wall penetration and retrieval outcomes. ANCOVA and multiple logistic regression models were used to analyze factors affecting retrieval success. Pairwise comparisons between filter types were performed. Of 488 IVC filter retrieval attempts, 94.1% were ultimately successful. The ALN filter had the highest mean absolute value of tilt (5.6 degrees), the Optease filter demonstrated the largest mean migration (-8.0mm) and the Bard G2 filter showed highest mean penetration (5.2mm). Dwell time of 0-90 days (OR, 11.1; P=0.01) or 90-180 days (OR, 2.6; P=0.02), net tilt of 10-15 degrees (OR 8.9; P=0.05), caudal migration of -10 to 0mm (OR, 3.46; P=0.03) and penetration less than 3mm (OR, 2.6; P=0.01) were positive predictors of successful retrievability. Higher odds of successful retrieval were obtained for the Bard G2X, Bard G2 and Cook Celect when compared to the ALN and Cordis Optease filters. Shorter dwell time, lower mean tilt, caudal migration and less caval wall penetration are positive predictors of successful IVC filter retrieval. Copyright © 2018 Société française de radiologie. Published by Elsevier Masson SAS. All rights reserved.

The internet and intelligent machines: search engines, agents and robots; Radiologische Informationssuche im Internet: Datenbanken, Suchmaschinen und intelligente Agenten

Energy Technology Data Exchange (ETDEWEB)

Achenbach, S; Alfke, H [Marburg Univ. (Germany). Abt. fuer Strahlendiagnostik

2000-04-01

in die naehere Zukunft mit moeglichen Auswirkungen auf die Radiologie gegeben. (orig.)

Analysis of subsequent publication of scientific orally presented abstracts of the French National Congress of Radiology. Part II: Focus on the French abstracts.

Science.gov (United States)

Dangouloff-Ros, V; Ronot, M; Lagadec, M; Vilgrain, V

2015-05-01

To evaluate the publication rate of scientific abstracts that were presented orally at the 2008, 2009, and 2010 annual meetings of the French Society of Radiology by French radiologists, and to perform a French regional analysis. Orally presented abstracts were identified by examining online abstract books of the 2008, 2009, and 2010 annual meetings of the French Society of Radiology, and cross-checked by reviewing the paper version of abstracts for the same period. Only abstracts from French teams were selected. The administrative region of submission was noted for each abstract and for each region the total population, the number of active radiologists, the number of active members of the French Society of Radiology and the number of academic radiologists were noted. Imaging subspecialties were also noted. 625 abstracts were identified resulting in 268 publications (publication rate: 43%). The median number of presentations and publications per region was 18 (range: 1-255) and 7 (range: 0-101), respectively. The ratio per million inhabitants was 7.5 and 3 respectively. The median number of presentations and publications per 100 active radiologists (respectively members of the FSR) was 7 and 3 (respectively 10 and 4). The median number of presentations and publications per academic radiologist were 2.6, and 1.2, respectively. The regional variations for each indicator were high (40-180%). Three subspecialties had a publication rate of more than 50%: thoracic imaging (58%), abdominal imaging (52%), and genitourinary imaging (51%). The publication rate of orally presented French scientific abstracts was high, with important variations according to the regions of origin and imaging subspecialties. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

Expert Systems: What Is an Expert System?

Science.gov (United States)

Duval, Beverly K.; Main, Linda

1994-01-01

Describes expert systems and discusses their use in libraries. Highlights include parts of an expert system; expert system shells; an example of how to build an expert system; a bibliography of 34 sources of information on expert systems in libraries; and a list of 10 expert system shells used in libraries. (Contains five references.) (LRW)

Hot Spot Removal System: System description

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

Hot Spot Removal System: System description

International Nuclear Information System (INIS)

1997-09-01

Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

Evidence-based radiology: a new approach to evaluate the clinical practice of radiology; Evidenzbasierte Radiologie: Ein neuer Ansatz zur Bewertung von klinisch angewandter radiologischer Diagnostik und Therapie

Energy Technology Data Exchange (ETDEWEB)

Puig, S. [Univ.Klinik fuer Radiodiagnostik, Medizinische Univ. Wien (Austria); Forschungsprogramm fuer Evidenzbasierte Medizinische Diagnostik, Inst. fuer Public Health, Paracelsus Medizinische Privatuniversitaet, Salzburg (Austria); Felder-Puig, R. [Ludwig-Boltzmann-Inst. fuer Health Technology Assessment, Vienna (Austria)

2006-07-15

Over the last several years, the concept and methodology of evidence-based medicine (EBM) have received significant attention in the scientific community. However, compared to therapeutic medical disciplines, EBM-based radiological publications are still underrepresented. This article summarizes the principles of EBM and discusses the possibilities of their application in radiology. The presented topics include the critical appraisal of studies on the basis on EBM principles, the explanation of EBM-relevant statistical outcome parameters (e.g., ''likelihood ratio'' for diagnostic and ''number needed to treat'' for interventional procedures), as well as the problems facing evidence-based radiology. Evidence-based evaluation of radiological procedures does not only address aspects of cost-effectiveness, but is also particularly helpful in identifying patient-specific usefulness. Therefore it should become an integral part of radiologist training. (orig.)

D0 Cryo System Control System Autodialer

Energy Technology Data Exchange (ETDEWEB)

Urbin, J.; /Fermilab

1990-04-17

The DO cryogenic system is controlled by a TI565-PLC based control system. This allows the system to be unmanned when in steady state operation. System experts will need to be contacted when system parameters exceed normal operating points and reach alarm setpoints. The labwide FIRUS system provides one alarm monitor and communication link. An autodialer provides a second and more flexible alarm monitor and communication link. The autodialer monitors contact points in the control system and after receiving indication of an alarm accesses a list of experts which it calls until it receives an acknowledgement. There are several manufacturers and distributors of autodialer systems. This EN explains the search process the DO cryo group used to fmd an autodialer system that fit the cryo system's needs and includes information and specs for the unit we chose.

Networked control of microgrid system of systems

Science.gov (United States)

Mahmoud, Magdi S.; Rahman, Mohamed Saif Ur; AL-Sunni, Fouad M.

2016-08-01

The microgrid has made its mark in distributed generation and has attracted widespread research. However, microgrid is a complex system which needs to be viewed from an intelligent system of systems perspective. In this paper, a network control system of systems is designed for the islanded microgrid system consisting of three distributed generation units as three subsystems supplying a load. The controller stabilises the microgrid system in the presence of communication infractions such as packet dropouts and delays. Simulation results are included to elucidate the effectiveness of the proposed control strategy.

System program for MICRO-CAMAC terminal system

International Nuclear Information System (INIS)

Sasajima, Yoji; Yamada, Takayuki; Yagi, Hideyuki; Ishiguro, Misako

1979-08-01

A JAERI on-line network system was developed and exists for on-line data processing of nuclear instrumentation. As terminal systems for the network system, the one with a Micro -8 micro-computer is used. By modifying the control program for Micro-8 terminal system, a system program has been developed for a MICRO-CAMAC terminal system, which is controlled by a micro-computer framed within the CAMAC Crate Controller. In this report are described software specifications of the MICRO -CAMAC terminal system and its operation method. (author)

System design in an evolving system-of-systems architecture and concept of operations

Science.gov (United States)

Rovekamp, Roger N., Jr.

Proposals for space exploration architectures have increased in complexity and scope. Constituent systems (e.g., rovers, habitats, in-situ resource utilization facilities, transfer vehicles, etc) must meet the needs of these architectures by performing in multiple operational environments and across multiple phases of the architecture's evolution. This thesis proposes an approach for using system-of-systems engineering principles in conjunction with system design methods (e.g., Multi-objective optimization, genetic algorithms, etc) to create system design options that perform effectively at both the system and system-of-systems levels, across multiple concepts of operations, and over multiple architectural phases. The framework is presented by way of an application problem that investigates the design of power systems within a power sharing architecture for use in a human Lunar Surface Exploration Campaign. A computer model has been developed that uses candidate power grid distribution solutions for a notional lunar base. The agent-based model utilizes virtual control agents to manage the interactions of various exploration and infrastructure agents. The philosophy behind the model is based both on lunar power supply strategies proposed in literature, as well as on the author's own approaches for power distribution strategies of future lunar bases. In addition to proposing a framework for system design, further implications of system-of-systems engineering principles are briefly explored, specifically as they relate to producing more robust cross-cultural system-of-systems architecture solutions.

Lighting system with thermal management system

Science.gov (United States)

Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2013-05-07

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Intelligent car guidance system (parking support system); Chiteki sharyo yudo system (chusha shien system)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This system enables a driver to park the car at a predetermined spot without the driver seeing the outside scene. The system shows on a driver seat display the steps that the driver is to follow and thereby supports the driver when visibility is poor, when the parking space is difficult to approach, when the driver is a novice, or when the driver is aged. The system ensures accurate positioning of the car by showing the steering direction and angle, the car speed, and the force of braking to the driver. For this purpose, the system knows the absolute car position by the use of an RFID (Radio Frequency Identification) tag which is a kind of IC (Integrated Circuit) card and D-GPS (Differential-Global Positioning System), grasps the relative car position by the use of a gyroscope, and collects data from plural sensors, which are complementary to each other, such as a car-speed sensor and a steering sensor. (translated by NEDO)

SystemC and systemC-AMS in practice systemC 2.3, 2.2 and systemC-AMS 1.0

CERN Document Server

Banerjee, Amal

2013-01-01

This book describes how engineers can make optimum use of the two industry standard analysis/design tools, SystemC and SystemC-AMS.  The authors use a system-level design approach, emphasizing how SystemC and SystemC-AMS features can be exploited most effectively to analyze/understand a given electronic system and explore the design space. The approach taken by this book enables system engineers to concentrate on only those SystemC/SystemC-AMS features that apply to their particular problem, leading to more efficient design. The presentation includes numerous, realistic and complete examples,

Systems engineering for very large systems

Science.gov (United States)

Lewkowicz, Paul E.

Very large integrated systems have always posed special problems for engineers. Whether they are power generation systems, computer networks or space vehicles, whenever there are multiple interfaces, complex technologies or just demanding customers, the challenges are unique. 'Systems engineering' has evolved as a discipline in order to meet these challenges by providing a structured, top-down design and development methodology for the engineer. This paper attempts to define the general class of problems requiring the complete systems engineering treatment and to show how systems engineering can be utilized to improve customer satisfaction and profit ability. Specifically, this work will focus on a design methodology for the largest of systems, not necessarily in terms of physical size, but in terms of complexity and interconnectivity.

Mapping biological systems to network systems

CERN Document Server

Rathore, Heena

2016-01-01

The book presents the challenges inherent in the paradigm shift of network systems from static to highly dynamic distributed systems – it proposes solutions that the symbiotic nature of biological systems can provide into altering networking systems to adapt to these changes. The author discuss how biological systems – which have the inherent capabilities of evolving, self-organizing, self-repairing and flourishing with time – are inspiring researchers to take opportunities from the biology domain and map them with the problems faced in network domain. The book revolves around the central idea of bio-inspired systems -- it begins by exploring why biology and computer network research are such a natural match. This is followed by presenting a broad overview of biologically inspired research in network systems -- it is classified by the biological field that inspired each topic and by the area of networking in which that topic lies. Each case elucidates how biological concepts have been most successfully ...

Man-systems distributed system for Space Station Freedom

Science.gov (United States)

Lewis, J. L.

1990-01-01

Viewgraphs on man-systems distributed system for Space Station Freedom are presented. Topics addressed include: description of man-systems (definition, requirements, scope, subsystems, and topologies); implementation (approach, tools); man-systems interfaces (system to element and system to system); prime/supporting development relationship; selected accomplishments; and technical challenges.

Systems Biology as an Integrated Platform for Bioinformatics, Systems Synthetic Biology, and Systems Metabolic Engineering

Science.gov (United States)

Chen, Bor-Sen; Wu, Chia-Chou

2013-01-01

Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i) system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii) system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii) system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv) systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering. PMID:24709875

Systems Biology as an Integrated Platform for Bioinformatics, Systems Synthetic Biology, and Systems Metabolic Engineering

Directory of Open Access Journals (Sweden)

Bor-Sen Chen

2013-10-01

Full Text Available Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering.

Cascade system using both trough system and dish system for power generation

International Nuclear Information System (INIS)

Zhang, Cheng; Zhang, Yanping; Arauzo, Inmaculada; Gao, Wei; Zou, Chongzhe

2017-01-01

Highlights: • A novel solar cascade system using both trough and dish collectors is proposed. • Heat rejected by the Stirling engines is collected by the condensed water. • The directions to increase the efficiency improvement has been pointed out • Influence of flow type of heating/cooling fluids of Stirling engines is considered. - Abstract: This paper represents a novel solar thermal cascade system using both trough and dish systems for power generation. An effective structure using the condensed fluid of Rankine cycle to cool the Stirling engines to use the heat released by Stirling engines was proposed. The cascade system model with different fluid circuits was developed. The models of some important components of the system, such as dish collector, trough collector and Stirling engine array, are presented with detail explanation in this paper. Corresponding stand-alone systems were also developed for comparison. Simulations were conducted with the models to find out efficiency difference between cascade system and corresponding stand-alone systems. The directions to increase the efficiency difference were also considered. Results show that the cascade system can achieve a higher efficiency with a high solar irradiance (>550 W/m"2). The flow type of fluids between heating and cooling Stirling engine array is also required to concern on designing a cascade system with Stirling engine array.

Hybrid Propulsion Systems for Remotely Piloted Aircraft Systems

Directory of Open Access Journals (Sweden)

Mithun Abdul Sathar Eqbal

2018-03-01

Full Text Available The development of more efficient propulsion systems for aerospace vehicles is essential to achieve key objectives. These objectives are to increase efficiency while reducing the amount of carbon-based emissions. Hybrid electric propulsion (HEP is an ideal means to maintain the energy density of hydrocarbon-based fuels and utilize energy-efficient electric machines. A system that integrates different propulsion systems into a single system, with one being electric, is termed an HEP system. HEP systems have been studied previously and introduced into Land, Water, and Aerial Vehicles. This work presents research into the use of HEP systems in Remotely Piloted Aircraft Systems (RPAS. The systems discussed in this paper are Internal Combustion Engine (ICE–Electric Hybrid systems, ICE–Photovoltaic (PV Hybrid systems, and Fuel-Cell Hybrid systems. The improved performance characteristics in terms of fuel consumption and endurance are discussed.

System Budgets

DEFF Research Database (Denmark)

Jeppesen, Palle

1996-01-01

The lecture note is aimed at introducing system budgets for optical communication systems. It treats optical fiber communication systems (six generations), system design, bandwidth effects, other system impairments and optical amplifiers.......The lecture note is aimed at introducing system budgets for optical communication systems. It treats optical fiber communication systems (six generations), system design, bandwidth effects, other system impairments and optical amplifiers....

Systems Biology, Systems Medicine, Systems Pharmacology: The What and The Why.

Science.gov (United States)

Stéphanou, Angélique; Fanchon, Eric; Innominato, Pasquale F; Ballesta, Annabelle

2018-05-09

Systems biology is today such a widespread discipline that it becomes difficult to propose a clear definition of what it really is. For some, it remains restricted to the genomic field. For many, it designates the integrated approach or the corpus of computational methods employed to handle the vast amount of biological or medical data and investigate the complexity of the living. Although defining systems biology might be difficult, on the other hand its purpose is clear: systems biology, with its emerging subfields systems medicine and systems pharmacology, clearly aims at making sense of complex observations/experimental and clinical datasets to improve our understanding of diseases and their treatments without putting aside the context in which they appear and develop. In this short review, we aim to specifically focus on these new subfields with the new theoretical tools and approaches that were developed in the context of cancer. Systems pharmacology and medicine now give hope for major improvements in cancer therapy, making personalized medicine closer to reality. As we will see, the current challenge is to be able to improve the clinical practice according to the paradigm shift of systems sciences.

A contemporary view of systems engineering. [definition of system and discussion of systems approach

Science.gov (United States)

Miles, R. F., Jr.

1974-01-01

The concept of a 'system' is defined, and the 'systems approach' is discussed. Four contemporary examples of the systems approach are presented: an operations research project, the planning-programming-budgeting system, an information processing system, and aerospace programs.

A security framework for systems of systems

NARCIS (Netherlands)

Trivellato, D.; Zannone, N.; Etalle, S.

2011-01-01

Systems of systems consist of a wide variety of dynamic, distributed coalitions of autonomous and heterogeneous systems that collaborate to achieve a common goal. While offering several advantages in terms of scalability and flexibility, this new paradigm has a strong impact on system

A Security Framework for Systems of Systems

NARCIS (Netherlands)

Trivellato, Daniel; Zannone, Nicola; Etalle, Sandro

2011-01-01

Systems of systems consist of a wide variety of dynamic, distributed coalitions of autonomous and heterogeneous systems that collaborate to achieve a common goal. While offering several advantages in terms of scalability and flexibility, this new paradigm has a strong impact on system

Smart electromechanical systems the central nervous system

CERN Document Server

Kurbanov, Vugar

2017-01-01

This book describes approaches to solving the problems of developing the central nervous system of robots (CNSR) based on smart electromechanical systems (SEMS) modules, principles of construction of the various modules of the central nervous system and variants of mathematical software CNSR in control systems for intelligent robots. It presents the latest advances in theory and practice at the Russian Academy of Sciences. Developers of intelligent robots to solve modern problems in robotics are increasingly addressing the use of the bionic approach to create robots that mimic the complexity and adaptability of biological systems. These have smart electromechanical system (SEMS), which are used in various cyber-physical systems (CPhS), and allow the functions of calculation, control, communications, information storage, monitoring, measurement and control of parameters and environmental parameters to be integrated. The behavior of such systems is based on the information received from the central nervous syst...

Non linear system become linear system

Directory of Open Access Journals (Sweden)

Petre Bucur

2007-01-01

Full Text Available The present paper refers to the theory and the practice of the systems regarding non-linear systems and their applications. We aimed the integration of these systems to elaborate their response as well as to highlight some outstanding features.

Epilogue: Systems Approaches and Systems Practice

Science.gov (United States)

Reynolds, Martin; Holwell, Sue

Each of the five systems approaches discussed in this volume: system dynamics (SD), the viable systems model (VSM), strategic options development and analysis (SODA), soft systems methodology (SSM) and critical systems heuristics (CSH) has a pedigree. Not in the sense of the sometimes absurd spectacle of animals paraded at dog shows. Rather, their pedigree derives from their systems foundations, their capacity to evolve and their flexibility in use. None of the five approaches has developed out of use in restricted and controlled contexts of either low or high levels of complicatedness. Neither has any one of them evolved as a consequence of being applied only to situations with either presumed stakeholder agreement on purpose, or courteous disagreement amongst stakeholders, or stakeholder coercion. The compilation is not a celebration of abstract ‘methodologies', but of theoretically robust approaches that have a genuine pedigree in practice.

Systems theory of interconnected port contact systems

NARCIS (Netherlands)

Eberard, D.; Maschke, B.M.; Schaft, A.J. van der

2005-01-01

Port-based network modeling of a large class of complex physical systems leads to dynamical systems known as port-Hamiltonian systems. The key ingredient of any port-Hamiltonian system is a power-conserving interconnection structure (mathematically formalized by the geometric notion of a Dirac

System specifications for the NDS EXFOR System

International Nuclear Information System (INIS)

Attree, P.M.; Smith, P.M.

1979-07-01

EXFOR is the agreed exchange format for the magnetic-tape exchange of nuclear reaction data between national and international nuclear data centres for the benefit of nuclear data users in all countries. The NDS EXFOR System is a computerized system for the storage and retrieval of EXFOR information compiled or received by the IAEA. This document is an internal manual for the system specifications of the NDS EXFOR System. It includes flow charts, system and program summaries, input and output specifications and file and record descriptions. The manual is updated from time to time when system modifications are made

A Systems Thinking Approach to Engineering Challenges of Military Systems-of-Systems

Science.gov (United States)

2016-09-01

as part of organizational thinking , processes and practice; and 2) an adequate SoSE practice supporting environment created and used to enable SoS...UNCLASSIFIED UNCLLASIFIED A Systems Thinking Approach to Engineering Challenges of Military Systems-of-Systems Pin Chen and Mark...their products and outcomes. This report introduces a systems thinking -based approach, SoS thinking , which offers a language and a thoughtful process

Activity System Theory Approach to Healthcare Information System

OpenAIRE

Bai, Guohua

2004-01-01

Healthcare information system is a very complex system and has to be approached from systematic perspectives. This paper presents an Activity System Theory (ATS) approach by integrating system thinking and social psychology. First part of the paper, the activity system theory is presented, especially a recursive model of human activity system is introduced. A project ‘Integrated Mobile Information System for Diabetic Healthcare (IMIS)’ is then used to demonstrate a practical application of th...

Role of imaging procedures in clarification of complications of pneumonia; Rolle der bildgebenden Verfahren zur Abklaerung von Pneumoniekomplikationen

Energy Technology Data Exchange (ETDEWEB)

Lampichler, K. [Medizinische Universitaet Wien, Universitaetsklinik fuer Radiologie und Nuklearmedizin, Allgemeines Krankenhaus, Wien (Austria)

2017-01-15

Despite a considerable number of antimicrobial agents and interdisciplinary treatment options, lower respiratory tract infections are still associated with high morbidity and mortality rates. Infections of the respiratory tract can lead to severe complications, such as empyema, lung abscesses and acute respiratory distress syndrome (ARDS). Besides intrapulmonary complications pneumonia can also impair other organs due to a systemic inflammatory response. Underlying cardiovascular diseases, such as chronic heart failure, arteriosclerosis and dysrhythmia can either deteriorate due to infections or be newly manifested as a result of pneumonia. Early diagnosis and therapy of these sometimes life-threatening complications are crucial and can have a severe impact on disease outcome. The most important imaging techniques include chest X-ray and computed tomography (CT) of the chest. Although a definite diagnosis is sometimes difficult or even impossible to establish using chest X-ray or CT, there are several findings indicative of intrapulmonary or extrapulmonary complications of pneumonia. Another useful and portable tool is thoracic ultrasound directly on the patient, which can be used to further define the underlying disease or as guidance during procedures. The chest X-ray is useful in initial diagnosis and follow-up. If complications or disease progression are suspected or the clinical course differs from the X-ray interpretation, a subsequent CT of the chest should be performed. (orig.) [German] Pneumonien sind trotz antimikrobieller Therapien und multidisziplinaerer Behandlungsstrategien unveraendert mit einer hohen Morbiditaets- und Mortalitaetsrate verbunden. Eine Infektion des Respirationstrakts kann zu Komplikationen wie Lungenempyem, -abszess und akutem Lungenversagen fuehren. Zusaetzlich kommt es neben den intrapulmonalen Komplikationen haeufig auch zur Beeintraechtigung anderer Organe. Kardiovaskulaere Grunderkrankungen wie Herzinsuffizienz, Arteriosklerose

Complex Adaptive Systems of Systems (CASOS) engineering environment.

Energy Technology Data Exchange (ETDEWEB)

Detry, Richard Joseph; Linebarger, John Michael; Finley, Patrick D.; Maffitt, S. Louise; Glass, Robert John, Jr.; Beyeler, Walter Eugene; Ames, Arlo Leroy

2012-02-01

Complex Adaptive Systems of Systems, or CASoS, are vastly complex physical-socio-technical systems which we must understand to design a secure future for the nation. The Phoenix initiative implements CASoS Engineering principles combining the bottom up Complex Systems and Complex Adaptive Systems view with the top down Systems Engineering and System-of-Systems view. CASoS Engineering theory and practice must be conducted together to develop a discipline that is grounded in reality, extends our understanding of how CASoS behave and allows us to better control the outcomes. The pull of applications (real world problems) is critical to this effort, as is the articulation of a CASoS Engineering Framework that grounds an engineering approach in the theory of complex adaptive systems of systems. Successful application of the CASoS Engineering Framework requires modeling, simulation and analysis (MS and A) capabilities and the cultivation of a CASoS Engineering Community of Practice through knowledge sharing and facilitation. The CASoS Engineering Environment, itself a complex adaptive system of systems, constitutes the two platforms that provide these capabilities.

Power Systems Integration Laboratory | Energy Systems Integration Facility

Science.gov (United States)

| NREL Power Systems Integration Laboratory Power Systems Integration Laboratory Research in the Energy System Integration Facility's Power Systems Integration Laboratory focuses on the microgrid applications. Photo of engineers testing an inverter in the Power Systems Integration Laboratory

Automatic TLI recognition system. Part 1: System description

Energy Technology Data Exchange (ETDEWEB)

Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

1994-05-01

This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume gives a general description of the ATR system.

Systems integration of business systems. Business system ni kanshite

Energy Technology Data Exchange (ETDEWEB)

Furukawa, H [Nippon Steel Corp., Tokyo (Japan)

1991-09-26

System integration (SI) is defined as combining hardwares and softwares as the infrastructures with know-hows for their use comprehensively to respond to high-level needs of users. This paper reports the features of an SI being developed by a company (E Company), its concept on the systematized development methodology, and the conceptual models. With the primary policy placed on creative integration standing on customers positions, the SI concept comprises three parts of models for evaluations as seen from the customers, evaluations as seen from the E Company, and the development object systems to link both parts. The third part is further consisted of several lower hierarchies including a customer controlled system hierarchy (this enables customers to control the system through visualization, for example, and includes three logic models (multiple solution selection, optimal solution under restricted conditions, and numerical solution)). 2 refs., 9 figs.

Fiscal system analysis - contractual systems

International Nuclear Information System (INIS)

Kaiser, M.J.

2006-01-01

Production sharing contracts are one of the most popular forms of contractual system used in petroleum agreements around the world, but the manner in which the fiscal terms and contract parameters impact system measures is complicated and not well understood. The purpose of this paper is to quantify the influence of private and market uncertainty in contractual fiscal systems. A meta-modelling approach is employed that couples the results of a simulation model with regression analysis to construct numerical functionals that quantify the fiscal regime. Relationships are derived that specify how the present value, rate of return, and take statistics vary as a function of the system parameters. The deepwater Girassol field development in Angola is taken as a case study. (author)

System Entropy Measurement of Stochastic Partial Differential Systems

Directory of Open Access Journals (Sweden)

Bor-Sen Chen

2016-03-01

Full Text Available System entropy describes the dispersal of a system’s energy and is an indication of the disorder of a physical system. Several system entropy measurement methods have been developed for dynamic systems. However, most real physical systems are always modeled using stochastic partial differential dynamic equations in the spatio-temporal domain. No efficient method currently exists that can calculate the system entropy of stochastic partial differential systems (SPDSs in consideration of the effects of intrinsic random fluctuation and compartment diffusion. In this study, a novel indirect measurement method is proposed for calculating of system entropy of SPDSs using a Hamilton–Jacobi integral inequality (HJII-constrained optimization method. In other words, we solve a nonlinear HJII-constrained optimization problem for measuring the system entropy of nonlinear stochastic partial differential systems (NSPDSs. To simplify the system entropy measurement of NSPDSs, the global linearization technique and finite difference scheme were employed to approximate the nonlinear stochastic spatial state space system. This allows the nonlinear HJII-constrained optimization problem for the system entropy measurement to be transformed to an equivalent linear matrix inequalities (LMIs-constrained optimization problem, which can be easily solved using the MATLAB LMI-toolbox (MATLAB R2014a, version 8.3. Finally, several examples are presented to illustrate the system entropy measurement of SPDSs.

System specifications for the NDS EXFOR System

Energy Technology Data Exchange (ETDEWEB)

Attree, P M; Smith, P M

1982-06-01

EXFOR is the agreed exchange format for the magnetic-tape exchange of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The NDS EXFOR System is a computerized system for the storage and retrieval of EXFOR information compiled or received of the IAEA. This document is an internal manual for the system specifications of the NDS EXFOR System. It includes flow charts, system and program summaries, input and output specifications and file and record descriptions. The manual is updated from time to time when system modifications are made; the first version was issued in July 1979. (author)

Performance of integrated systems of automated roller shade systems and daylight responsive dimming systems

Energy Technology Data Exchange (ETDEWEB)

Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon [Department of Architectural Engineering, Sejong University, Kunja-Dong, Kwangjin-Gu, Seoul (Korea, Republic of); Lee, Eleanor S. [Building Technologies Department, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

2011-03-15

Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90% of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system. (author)

Reliability-Based Optimization of Series Systems of Parallel Systems

DEFF Research Database (Denmark)

Enevoldsen, I.; Sørensen, John Dalsgaard

1993-01-01

Reliability-based design of structural systems is considered. In particular, systems where the reliability model is a series system of parallel systems are treated. A sensitivity analysis for this class of problems is presented. Optimization problems with series systems of parallel systems...... optimization of series systems of parallel systems, but it is also efficient in reliability-based optimization of series systems in general....

Cobit system in the audit processes of the systems of computer systems

Directory of Open Access Journals (Sweden)

Julio Jhovany Santacruz Espinoza

2017-12-01

Full Text Available The present research work has been carried out to show the benefits of the use of the COBIT system in the auditing processes of the computer systems, the problem is related to: How does it affect the process of audits in the institutions, use of the COBIT system? The main objective is to identify the incidence of the use of the COBIT system in the auditing process used by computer systems within both public and private organizations; In order to achieve our stated objectives of the research will be developed first with the conceptualization of key terms for an easy understanding of the subject, as a conclusion: we can say the COBIT system allows to identify the methodology by using information from the IT departments, to determine the resources of the (IT Information Technology, specified in the COBIT system, such as files, programs, computer networks, including personnel that use or manipulate the information, with the purpose of providing information that the organization or company requires to achieve its objectives.

Chaos synchronization between Chen system and Genesio system

International Nuclear Information System (INIS)

Wu Xianyong; Guan Zhihong; Wu Zhengping; Li Tao

2007-01-01

This Letter presents two synchronization schemes between two different chaotic systems. Active control synchronization and adaptive synchronization between Chen system and Genesio system are studied, different controllers are designed to synchronize the drive and response systems, active control synchronization is used when system parameters are known; adaptive synchronization is employed when system parameters are unknown or uncertain. Simulation results show the effectiveness of the proposed schemes

Embedded systems design with special arithmetic and number systems

CERN Document Server

Sousa, Leonel; Chang, Chip-Hong

2017-01-01

This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System Double-Base Number System, Decimal Floating Point Number System and Continuous Valued Number System. Readers will learn the strategies and trade-offs of using unconventional number systems in application-specific processors and be able to apply and design appropriate arithmetic operations from these number systems to boost the performance of digital systems. • Serves as a single-source reference to designing embedded systems with unconventional number systems • Covers theory as well as implementation on application-specific processors • Explains mathematical concepts in a manner accessible to readers with diverse backgrounds.

Expert systems in process control systems

International Nuclear Information System (INIS)

Wittig, T.

1987-01-01

To illustrate where the fundamental difference between expert systems in classical diagnosis and in industrial control lie, the work of process control instrumentation is used as an example for the job of expert systems. Starting from the general process of problem-solving, two classes of expert systems can be defined accordingly. (orig.) [de

Amotosalen: Allogeneic Cellular Immunotherapies system, INTERCEPT Plasma System, INTERCEPT Platelet System, S 59.

Science.gov (United States)

2003-01-01

Adis CommentsCerus Corporation is developing a variety of pathogen-inactivation systems, based on its Helinx technology. Three of the systems include amotosalen [S 59] as the inactivation compound. Amotosalen is a light-activated, DNA-, RNA-crosslinking psoralen compound, which is used to neutralise pathogens. The systems that utilise amotosalen are called the INTERCEPT Platelet System, the INTERCEPT Plasma System and the Allogeneic Cellular Immunotherapies (ACIT) system. The INTERCEPT Platelet System and INTERCEPT Plasma System are two of the systems that make up Cerus' INTERCEPT Blood Systems. The other system is the INTERCEPT Red Blood Cell System, which contains S 303 as the inactivation compound rather than amotosalen. Cerus' Helinx technology is able to prevent replication of DNA or RNA that is present in pathogens but not in the blood components being treated (e.g. platelets and plasma). When added to the blood components, the inactivation agent (in this case amotosalen) crosses the membrane or cell wall of the pathogen. When activated by light, amotosalen binds to the nucleic acid of the pathogen and prevents replication. This process prevents infection. INTERCEPT Platelet System: Cerus developed its INTERCEPT Platelet System, in collaboration with Baxter Healthcare, for use in blood centres. Platelets are an essential component of the coagulation process and may be required by patients undergoing surgery, cancer chemotherapy, transplantation or with bleeding disorders. The system is made up of an illuminator device, a compound absorption device and a processing kit containing amotosalen. In October 2002, the two companies announced that CE Mark approval had been received for the illuminator device for the INTERCEPT trade mark Blood System. Application of this technology to platelets is the first to be approved. As it is a new technology, the system is currently undergoing process validation in accordance with European Blood Bank GMP requirements. This

Manager's assistant systems for space system planning

Science.gov (United States)

Bewley, William L.; Burnard, Robert; Edwards, Gary E.; Shoop, James

1992-01-01

This paper describes a class of knowledge-based 'assistant' systems for space system planning. Derived from technology produced for the DARPA/USAF Pilot's Associate program, these assistant systems help the human planner by doing the bookkeeping to maintain plan data and executing the procedures and heuristics currently used by the human planner to define, assess, diagnose, and revise plans. Intelligent systems for Space Station Freedom assembly sequence planning and Advanced Launch System modeling will be presented as examples. Ongoing NASA-funded work on a framework supporting the development of such tools will also be described.

Systems of Systems: Scaling Up the Development Process

National Research Council Canada - National Science Library

Humphrey, Watts

2006-01-01

... of massive systems into system-of-systems structures Section 3 points out how large-scale systems development efforts have typically failed because of project-management and not technical problems...

Digital processing data communication systems (bus systems)

International Nuclear Information System (INIS)

Fleck, K.

1980-01-01

After an introduction to the technology of digital processing data communication systems there are the following chapters: digital communication of processing data in automation technology, the technology of biserial communication, the implementaiton of a bus system, the data transmission of the TDC-2000 system of Honeywell's and the process bus CS 275 in the automation system TELEPERM M of Siemens AG. (WB) [de

System-of-Systems Approach for Integrated Energy Systems Modeling and Simulation: Preprint

Energy Technology Data Exchange (ETDEWEB)

Mittal, Saurabh; Ruth, Mark; Pratt, Annabelle; Lunacek, Monte; Krishnamurthy, Dheepak; Jones, Wesley

2015-08-21

Today’s electricity grid is the most complex system ever built—and the future grid is likely to be even more complex because it will incorporate distributed energy resources (DERs) such as wind, solar, and various other sources of generation and energy storage. The complexity is further augmented by the possible evolution to new retail market structures that provide incentives to owners of DERs to support the grid. To understand and test new retail market structures and technologies such as DERs, demand-response equipment, and energy management systems while providing reliable electricity to all customers, an Integrated Energy System Model (IESM) is being developed at NREL. The IESM is composed of a power flow simulator (GridLAB-D), home energy management systems implemented using GAMS/Pyomo, a market layer, and hardware-in-the-loop simulation (testing appliances such as HVAC, dishwasher, etc.). The IESM is a system-of-systems (SoS) simulator wherein the constituent systems are brought together in a virtual testbed. We will describe an SoS approach for developing a distributed simulation environment. We will elaborate on the methodology and the control mechanisms used in the co-simulation illustrated by a case study.

Linear Actuator System for the NASA Docking System

Science.gov (United States)

Dick, Brandon N.; Oesch, Christopher; Rupp, Timothy W.

2017-01-01

The Linear Actuator System (LAS) is a major sub-system within the NASA Docking System (NDS). The NDS Block 1 will be used on the Boeing Crew Space Transportation (CST-100) system to achieve docking with the International Space Station. Critical functions in the Soft Capture aspect of docking are performed by the LAS. This paper describes the general function of the LAS, the system's key requirements and technical challenges, and the development and qualification approach for the system.

Methods, apparatus, and systems for monitoring transmission systems

Science.gov (United States)

Polk, Robert E [Idaho Falls, ID; Svoboda, John M [Idaho Falls, ID; West, Phillip B [Idaho Falls, ID; Heath, Gail L [Iona, ID; Scott, Clark L [Idaho Falls, ID

2010-08-31

A sensing platform for monitoring a transmission system, and method therefor, may include a sensor that senses one or more conditions relating to a condition of the transmission system and/or the condition of an environment around the transmission system. A control system operatively associated with the sensor produces output data based on an output signal produced by the sensor. A transmitter operatively associated with the control system transmits the output data from the control system.

System Engineering of Photonic Systems for Space Application

Science.gov (United States)

Watson, Michael D.; Pryor, Jonathan E.

2014-01-01

The application of photonics in space systems requires tight integration with the spacecraft systems to ensure accurate operation. This requires some detailed and specific system engineering to properly incorporate the photonics into the spacecraft architecture and to guide the spacecraft architecture in supporting the photonics devices. Recent research in product focused, elegant system engineering has led to a system approach which provides a robust approach to this integration. Focusing on the mission application and the integration of the spacecraft system physics incorporation of the photonics can be efficiently and effectively accomplished. This requires a clear understanding of the driving physics properties of the photonics device to ensure proper integration with no unintended consequences. The driving physics considerations in terms of optical performance will be identified for their use in system integration. Keywords: System Engineering, Optical Transfer Function, Optical Physics, Photonics, Image Jitter, Launch Vehicle, System Integration, Organizational Interaction

Systems

International Nuclear Information System (INIS)

Anon.

1980-01-01

Papers in this session describe the concept of mined geologic disposal system and methods for ensuring that the system, when developed, will meet all technical requirements. Also presented in the session are analyses of system parameters, such as cost and nuclear criticality potential, as well as a technical analysis of a requirement that the system permit retrieval of the waste for some period of time. The final paper discusses studies under way to investigate technical alternatives or complements to the mined geologic disposal system. Titles of the presented papers are: (1) Waste Isolation System; (2) Waste Isolation Economics; (3) BWIP Technical Baseline; (4) Criticality Considerations in Geologic Disposal of High-Level Waste; (5) Retrieving Nuclear Wastes from Repository; (6) NWTS Programs for the Evaluation of Technical Alternatives or Complements to Mined Geologic Repositories - Purpose and Objectives

systems

Directory of Open Access Journals (Sweden)

Alexander Leonessa

2000-01-01

Full Text Available A nonlinear robust control-system design framework predicated on a hierarchical switching controller architecture parameterized over a set of moving nominal system equilibria is developed. Specifically, using equilibria-dependent Lyapunov functions, a hierarchical nonlinear robust control strategy is developed that robustly stabilizes a given nonlinear system over a prescribed range of system uncertainty by robustly stabilizing a collection of nonlinear controlled uncertain subsystems. The robust switching nonlinear controller architecture is designed based on a generalized (lower semicontinuous Lyapunov function obtained by minimizing a potential function over a given switching set induced by the parameterized nominal system equilibria. The proposed framework robustly stabilizes a compact positively invariant set of a given nonlinear uncertain dynamical system with structured parametric uncertainty. Finally, the efficacy of the proposed approach is demonstrated on a jet engine propulsion control problem with uncertain pressure-flow map data.

Ventilation systems

International Nuclear Information System (INIS)

Gossler

1980-01-01

The present paper deals with - controlled area ventilation systems - ventilation systems for switchgear-building and control-room - other ventilation systems for safety equipments - service systems for ventilation systems. (orig./RW)

The thickened left ventricle: etiology, differential diagnosis and implications for cardiovascular radiology; Der dicke linke Ventrikel. Ursachen und Differenzialdiagnose der linksventrikulaeren Hypertrophie und Implikationen fuer die kardiovaskulaere Radiologie

Energy Technology Data Exchange (ETDEWEB)

Bischoff, P.; Barkhausen, J.; Hunold, P. [Universitaetsklinikum Schleswig-Holstein, Luebeck (Germany). Klinik fuer Radiologie und Nuklearmedizin; Radke, P.W. [Universitaetsklinikum Schleswig Holstein, Luebeck (Germany). Medizinische Klinik II

2012-08-15

Hypertrophy of the left ventricular myocardium is a common finding and can be reliably detected by echocardiography, CT and MRI. Common causes include diseases associated with increased cardiac afterload as well as primary and secondary cardiomyopathy. With the opportunity to determine functional parameters and myocardial mass precisely as well as to detect structural changes of the cardiac muscle simultaneously, cardiac MRI is the most precise imaging method for quantifying left ventricular hypertrophy as well as determining the cause and the exact characterization of the myocardial changes. It is mandatory, however, to create a flexible, individually adapted examination protocol. This review presents useful diagnostic algorithms in relation to different underlying pathologies in patients with left ventricular hypertrophy. (orig.)

SSDL personel dosimetry system: migration from a client - server system into a web-based system

International Nuclear Information System (INIS)

Maizura Ibrahim; Rosnah Shariff; Ahmad Bazlie Abdul Kadir; John Konsoh Sangau; Mohd Amin Sharifuldin Salleh; Taiman Kadni; Noriah Mod Ali

2007-01-01

Personnel Dosimetry System has been used by the Secondary Standard Dosimetry Laboratory (SSDL), Nuclear Malaysia since ten years ago. The system is a computerized database system with a client-server concept. This system has been used by Film Badge Laboratory, SSDL to record details of clients, calculation of Film Badge dosage, management of radiation workers data's, generating of dosage report, retrieval of statistical reports regarding film badge usage for the purpose of reporting to monitoring bodies such as Atomic Energy Licensing Board (AELB), Ministry of Health and others. But, due to technical problems that frequently occurs, the system is going to be replaced by a newly developed web- based system called e-SSDL. This paper describe the problems that regularly occurs in the previous system, explains how the process of replacing the client-server system with a web-based system is done and the differences between the previous and current system. This paper will also present details architecture of the new system and the new process introduced in processing film badges. (Author)

Real-Time Operating Systems for Multicore Embedded Systems

OpenAIRE

Tomiyama, Hiroyuki; Honda, Shinya; Takada, Hiroaki

2008-01-01

Multicore systems-on-chip have become popular inthe design of embedded systems in order to simultaneously achieve high performance and low power consumption. On the software side, real-time operating systems are necessary in orderto handle growing complexity of embedded software. This paper describes requirements, design principles and implementation techniques for real-time operating systems to be used inasymmetric multicore systems.

EXPERT SYSTEMS

OpenAIRE

Georgiana Marin; Mihai Catalin Andrei

2011-01-01

In recent decades IT and computer systems have evolved rapidly in economic informatics field. The goal is to create user friendly information systems that respond promptly and accurately to requests. Informatics systems evolved into decision assisted systems, and such systems are converted, based on gained experience, in expert systems for creative problem solving that an organization is facing. Expert systems are aimed at rebuilding human reasoning on the expertise obtained from experts, sto...

A master system for power system fault phenomena

Energy Technology Data Exchange (ETDEWEB)

Yoo, Myung Ho; Jang, Sang Ho; Hong, Joon Hee; Min, Wan Ki; Yoo, Chang Hwan [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

1995-12-31

This report includes as follows - Real time digital simulator - Remote measuring, analyzing and reproducing system of power system fault data -Power system reduction method program using EMTP -Test system for protection device. (author). 22 refs., 38 figs.

T-systems and Y-systems in integrable systems

International Nuclear Information System (INIS)

Kuniba, Atsuo; Nakanishi, Tomoki; Suzuki, Junji

2011-01-01

T- and Y-systems are ubiquitous structures in classical and quantum integrable systems. They are difference equations having a variety of aspects related to commuting transfer matrices in solvable lattice models, q-characters of Kirillov-Reshetikhin modules of quantum affine algebras, cluster algebras with coefficients, periodicity conjectures of Zamolodchikov and others, dilogarithm identities in conformal field theory, difference analog of L-operators in KP hierarchy, Stokes phenomena in 1D Schroedinger problem, AdS/CFT correspondence, Toda field equations on discrete spacetime, Laplace sequence in discrete geometry, Fermionic character formulas and combinatorial completeness of Bethe ansatz, Q-system and ideal gas with exclusion statistics, analytic and thermodynamic Bethe ansaetze, quantum transfer matrix method and so forth. This review is a collection of short reviews on these topics which can be read more or less independently. (topical review)

T-systems and Y-systems in integrable systems

Energy Technology Data Exchange (ETDEWEB)

Kuniba, Atsuo [Institute of Physics, University of Tokyo, Komaba, Tokyo 153-8902 (Japan); Nakanishi, Tomoki [Graduate School of Mathematics, Nagoya University, Nagoya 464-8604 (Japan); Suzuki, Junji, E-mail: atsuo@gokutan.c.u-tokyo.ac.jp [Department of Physics, Faculty of Science, Shizuoka University, Ohya 836 (Japan)

2011-03-11

T- and Y-systems are ubiquitous structures in classical and quantum integrable systems. They are difference equations having a variety of aspects related to commuting transfer matrices in solvable lattice models, q-characters of Kirillov-Reshetikhin modules of quantum affine algebras, cluster algebras with coefficients, periodicity conjectures of Zamolodchikov and others, dilogarithm identities in conformal field theory, difference analog of L-operators in KP hierarchy, Stokes phenomena in 1D Schroedinger problem, AdS/CFT correspondence, Toda field equations on discrete spacetime, Laplace sequence in discrete geometry, Fermionic character formulas and combinatorial completeness of Bethe ansatz, Q-system and ideal gas with exclusion statistics, analytic and thermodynamic Bethe ansaetze, quantum transfer matrix method and so forth. This review is a collection of short reviews on these topics which can be read more or less independently. (topical review)

Sail GTS ground system analysis: Avionics system engineering

Science.gov (United States)

Lawton, R. M.

1977-01-01

A comparison of two different concepts for the guidance, navigation and control test set signal ground system is presented. The first is a concept utilizing a ground plate to which crew station, avionics racks, electrical power distribution system, master electrical common connection assembly and marshall mated elements system grounds are connected by 4/0 welding cable. An alternate approach has an aluminum sheet interconnecting the signal ground reference points between the crew station and avionics racks. The comparison analysis quantifies the differences between the two concepts in terms of dc resistance, ac resistance and inductive reactance. These parameters are figures of merit for ground system conductors in that the system with the lowest impedance is the most effective in minimizing noise voltage. Although the welding cable system is probably adequate, the aluminum sheet system provides a higher probability of a successful system design.

Multiple Energy System Analysis of Smart Energy Systems

DEFF Research Database (Denmark)

Thellufsen, Jakob Zinck

2015-01-01

thermal grids and smart gas grids, Smart Energy Systems moves the flexibility away from the fuel as is the case in current energy systems and into the system itself. However, most studies applying a Smart Energy System approach deals with analyses for either single countries or whole continents......To eliminate the use of fossil fuels in the energy sector it is necessary to transition to future 100% renewable energy systems. One approach for this radical change in our energy systems is Smart Energy Systems. With a focus on development and interaction between smart electricity grids, smart......, but it is unclear how regions, municipalities, and communities should deal with these national targets. It is necessary to be able to provide this information since Smart Energy Systems utilize energy resources and initiatives that have strong relations to local authorities and communities, such as onshore wind...

Cooling system for the IFMIF-EVEDA radiofrequency system

International Nuclear Information System (INIS)

Perez Pichel, G. D.

2012-01-01

The IFMIF-EVEDA project consists on an accelerator prototype that will be installed at Rokkasho (Japan). Through CIEMAT, that is responsible of the development of many systems and components. Empresarios Agrupados get the responsibility of the detailed design of the cooling system for the radiofrequency system (RF system) that must feed the accelerator. the RF water cooling systems is the water primary circuit that provides the required water flow (with a certain temperature, pressure and water quality) and also dissipates the necessary thermal power of all the radiofrequency system equipment. (Author) 4 refs.

Tritium system test assembly control system cost estimate

International Nuclear Information System (INIS)

Stutz, R.A.

1979-01-01

The principal objectives of the Tritium Systems Test Assembly (TSTA), which includes the development, demonstration and interfacing of technologies related to the deuterium--tritium fuel cycle for fusion reactor systems, are concisely stated. The various integrated subsystems comprising TSTA and their functions are discussed. Each of the four major subdivisions of TSTA, including the main process system, the environmental and safety systems, supporting systems and the physical plant are briefly discussed. An overview of the Master Data Acquisition and Control System, which will control all functional operation of TSTA, is provided

Site systems engineering: Systems engineering management plan

Energy Technology Data Exchange (ETDEWEB)

Grygiel, M.L. [Westinghouse Hanford Co., Richland, WA (United States)

1996-05-03

The Site Systems Engineering Management Plan (SEMP) is the Westinghouse Hanford Company (WHC) implementation document for the Hanford Site Systems Engineering Policy, (RLPD 430.1) and Systems Engineering Criteria Document and Implementing Directive, (RLID 430.1). These documents define the US Department of Energy (DOE), Richland Operations Office (RL) processes and products to be used at Hanford to implement the systems engineering process at the site level. This SEMP describes the products being provided by the site systems engineering activity in fiscal year (FY) 1996 and the associated schedule. It also includes the procedural approach being taken by the site level systems engineering activity in the development of these products and the intended uses for the products in the integrated planning process in response to the DOE policy and implementing directives. The scope of the systems engineering process is to define a set of activities and products to be used at the site level during FY 1996 or until the successful Project Hanford Management Contractor (PHMC) is onsite as a result of contract award from Request For Proposal DE-RP06-96RL13200. Following installation of the new contractor, a long-term set of systems engineering procedures and products will be defined for management of the Hanford Project. The extent to which each project applies the systems engineering process and the specific tools used are determined by the project`s management.

System safety education focused on system management

Science.gov (United States)

Grose, V. L.

1971-01-01

System safety is defined and characteristics of the system are outlined. Some of the principle characteristics include role of humans in hazard analysis, clear language for input and output, system interdependence, self containment, and parallel analysis of elements.

Modeling Power Systems as Complex Adaptive Systems

Energy Technology Data Exchange (ETDEWEB)

Chassin, David P.; Malard, Joel M.; Posse, Christian; Gangopadhyaya, Asim; Lu, Ning; Katipamula, Srinivas; Mallow, J V.

2004-12-30

Physical analogs have shown considerable promise for understanding the behavior of complex adaptive systems, including macroeconomics, biological systems, social networks, and electric power markets. Many of today's most challenging technical and policy questions can be reduced to a distributed economic control problem. Indeed, economically based control of large-scale systems is founded on the conjecture that the price-based regulation (e.g., auctions, markets) results in an optimal allocation of resources and emergent optimal system control. This report explores the state-of-the-art physical analogs for understanding the behavior of some econophysical systems and deriving stable and robust control strategies for using them. We review and discuss applications of some analytic methods based on a thermodynamic metaphor, according to which the interplay between system entropy and conservation laws gives rise to intuitive and governing global properties of complex systems that cannot be otherwise understood. We apply these methods to the question of how power markets can be expected to behave under a variety of conditions.

Integrated Systems Health Management for Intelligent Systems

Science.gov (United States)

Figueroa, Fernando; Melcher, Kevin

2011-01-01

The implementation of an integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive at an accurate and reliable assessment of its health. In this paper, concepts, procedures, and approaches are presented as a foundation for implementing an intelligent systems ]relevant ISHM capability. The capability stresses integration of DIaK from all elements of a system. Both ground-based (remote) and on-board ISHM capabilities are compared and contrasted. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems.

Systems Measures of Water Distribution System Resilience

Energy Technology Data Exchange (ETDEWEB)

Klise, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Murray, Regan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walker, La Tonya Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-01-01

Resilience is a concept that is being used increasingly to refer to the capacity of infrastructure systems to be prepared for and able to respond effectively and rapidly to hazardous events. In Section 2 of this report, drinking water hazards, resilience literature, and available resilience tools are presented. Broader definitions, attributes and methods for measuring resilience are presented in Section 3. In Section 4, quantitative systems performance measures for water distribution systems are presented. Finally, in Section 5, the performance measures and their relevance to measuring the resilience of water systems to hazards is discussed along with needed improvements to water distribution system modeling tools.

Instrument air system - Aging impact on system availability

International Nuclear Information System (INIS)

Villaran, M.; Subudhi, M.

1989-01-01

As part of ongoing efforts to understand and manage the effects of aging in nuclear power plants, an aging assessment was performed for the Instrument Air (IA) system, a system that has been the subject of much scrutiny in recent years. Despite its non-safety classification, instrument air has been a factor in a number of potentially serious events. This report presents the results of the assessment and discusses the impact of instrument air system aging on system availability and plant safety. This work was performed for the US Nuclear Regulatory Commission (NRC) as part of the Nuclear Plant Aging Research (NPAR) program. To perform the complex task of analyzing an entire system, the Aging and Life Extension Assessment Program (ALEAP) System Level Plan was developed by Brookhaven National Laboratory and applied successfully in previous system aging studies. The work presented herein was performed using two parallel work paths, as described in the ALEAP plant. One path used deterministic techniques to assess the impact of aging on compressed air system performance, while the second path used probabilistic methods. Results from both paths then were used to characterize aging in the instrument air system. Some conclusions from this work are: compressors, air system valves, and air dryers were found to make up the majority of failures; the effectiveness and quantity of preventive maintenance devoted to a component significantly affected the amount of failures experienced; review of compressed air system designs and studies using a PRA-based system model revealed that the redundancy of key components (compressors, dryers, IA/SA crossconnect valve) was an important factor in system availability; total loss of air events are uncommon

Airport Information Retrieval System (AIRS) System Design

Science.gov (United States)

1974-07-01

This report presents the system design for a prototype air traffic flow control automation system developed for the FAA's Systems Command Center. The design was directed toward the immediate automation of airport data for use in traffic load predicti...

System description of the Basic MRS System for the FY 1990 Systems Integration Program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Basic MRS System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the Office of Civilian Radioactive Waste Management Office (OCRWM). Two specific systems studies initiated in FY 1990, the Reference System Performance Evaluation and the Aggregate Receipt Rate Study, utilize the information in this document. The Basic MRS System is the current OCRWM reference high-level radioactive wastes repository system concept. It is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes. The Basic MRS System includes a storage-only MRS that provides for a limited amount of commercial spent fuel storage capacity prior to acceptance by the geologic repository for disposal. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. The basic MRS system contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, an MRS facility that provides interim storage wastes accepted from the waste generators, a repository facility that packages the wastes and then emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the waste between these major facilities

Systems Biology and Health Systems Complexity in;

NARCIS (Netherlands)

Donald Combs, C.; Barham, S.R.; Sloot, P.M.A.

2016-01-01

Systems biology addresses interactions in biological systems at different scales of biological organization, from the molecular to the cellular, organ, organism, societal, and ecosystem levels. This chapter expands on the concept of systems biology, explores its implications for individual patients

Triggering system innovation in agricultural innovation systems

NARCIS (Netherlands)

Turner, James A.; Williams, Tracy; Nicholas, Graeme; Foote, Jeff; Rijswijk, Kelly; Barnard, Tim; Beechener, Sam; Horita, Akiko

2017-01-01

This article describes a process for stimulating engagement among change agents to develop a shared understanding of systemic problems in the agricultural innovation system (AIS), challenge prevalent institutional logics and identify actions they might undertake to stimulate system innovation.

Port contact systems for irreversible thermodynamical systems

NARCIS (Netherlands)

Eberard, D.; Maschke, B.M.; Schaft, A.J. van der

2005-01-01

In this paper we propose a definition of control contact systems, generalizing input-output Hamiltonian systems, to cope with models arising from irreversible Thermodynamics. We exhibit a particular subclass of these systems, called conservative, that leaves invariant some Legendre submanifold (the

Lectures on algebraic system theory: Linear systems over rings

Science.gov (United States)

Kamen, E. W.

1978-01-01

The presentation centers on four classes of systems that can be treated as linear systems over a ring. These are: (1) discrete-time systems over a ring of scalars such as the integers; (2) continuous-time systems containing time delays; (3) large-scale discrete-time systems; and (4) time-varying discrete-time systems.

IDAPS (Image Data Automated Processing System) System Description

Science.gov (United States)

1988-06-24

This document describes the physical configuration and components used in the image processing system referred to as IDAPS (Image Data Automated ... Processing System). This system was developed by the Environmental Research Institute of Michigan (ERIM) for Eglin Air Force Base. The system is designed

A semantic security framework for systems of systems

NARCIS (Netherlands)

Trivellato, Daniel; Zannone, Nicola; Glaundrup, Maurice; Skowronek, Jacek; Etalle, Sandro

2013-01-01

Systems of systems (SoS) are dynamic coalitions of distributed, autonomous and heterogeneous systems that collaborate to achieve a common goal. While offering several advantages in terms of scalability and flexibility, the SoS paradigm has a strong impact on systems interoperability and on the

Thermal Distribution System | Energy Systems Integration Facility | NREL

Science.gov (United States)

Thermal Distribution System Thermal Distribution System The Energy Systems Integration Facility's . Photo of the roof of the Energy Systems Integration Facility. The thermal distribution bus allows low as 10% of its full load level). The 60-ton chiller cools water with continuous thermal control

Seamless integrated network system for wireless communication systems

NARCIS (Netherlands)

Wu, Gang; Mizuno, Mitsuhiko; Hase, Yoshihiro; Havinga, Paul J.M.

2006-01-01

To create a network that connects a plurality of wireless communication systems to create optimal systems for various environments, and that seamlessly integrates the resulting systems together in order to provide more efficient and advanced service in general. A network system that can seamlessly

Seamless integrated network system for wireless communication systems

NARCIS (Netherlands)

Wu, Gang; Mizuno, Mitsuhiko; Hase, Yoshihiro; Havinga, Paul J.M.

2002-01-01

To create a network that connects a plurality of wireless communication systems to create optimal systems for various environments, and that seamlessly integrates the resulting systems together in order to provide more efficient and advanced service in general. A network system that can seamlessly

Modeling learning technology systems as business systems

NARCIS (Netherlands)

Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

2003-01-01

The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering

Database management system for large container inspection system

International Nuclear Information System (INIS)

Gao Wenhuan; Li Zheng; Kang Kejun; Song Binshan; Liu Fang

1998-01-01

Large Container Inspection System (LCIS) based on radiation imaging technology is a powerful tool for the Customs to check the contents inside a large container without opening it. The author has discussed a database application system, as a part of Signal and Image System (SIS), for the LCIS. The basic requirements analysis was done first. Then the selections of computer hardware, operating system, and database management system were made according to the technology and market products circumstance. Based on the above considerations, a database application system with central management and distributed operation features has been implemented

Verification and Validation Issues in Systems of Systems

Directory of Open Access Journals (Sweden)

Eric Honour

2013-11-01

Full Text Available The cutting edge in systems development today is in the area of "systems of systems" (SoS large networks of inter-related systems that are developed and managed separately, but that also perform collective activities. Such large systems typically involve constituent systems operating with different life cycles, often with uncoordinated evolution. The result is an ever-changing SoS in which adaptation and evolution replace the older engineering paradigm of "development". This short paper presents key thoughts about verification and validation in this environment. Classic verification and validation methods rely on having (a a basis of proof, in requirements and in operational scenarios, and (b a known system configuration to be proven. However, with constant SoS evolution, management of both requirements and system configurations are problematic. Often, it is impossible to maintain a valid set of requirements for the SoS due to the ongoing changes in the constituent systems. Frequently, it is even difficult to maintain a vision of the SoS operational use as users find new ways to adapt the SoS. These features of the SoS result in significant challenges for system proof. In addition to discussing the issues, the paper also indicates some of the solutions that are currently used to prove the SoS.

Systems Theory and Systems Approach to Leadership

Directory of Open Access Journals (Sweden)

Dr.Sc. Berim Ramosaj

2014-06-01

Full Text Available Systems theory is product of the efforts of many researchers to create an intermediate field of coexistence of all sciences. If not for anything else, because of the magnitude that the use of systemic thinking and systemic approach has taken, it has become undisputed among the theories. Systems theory not only provides a glossary of terms with which researchers from different fields can be understood, but provides a framework for the presentation and interpretation of phenomena and realities. This paper addresses a systematic approach to leadership, as an attempt to dredge leadership and systems theory literature to find the meeting point. Systems approach is not an approach to leadership in terms of a manner of leader’s work, but it’s the leader's determination to factorize in his leadership the external environment and relationships with and among elements. Leader without followers is unable to exercise his leadership and to ensure their conviction he should provide a system, a structure, a purpose, despite the alternative chaos. Systems approach clarifies the thought on the complexity and dynamism of the environment and provides a framework for building ideas. If the general system theory is the skeleton of science (Boulding: 1956, this article aims to replenish it with leadership muscles by prominent authors who have written on systems theory and leadership, as well as through original ideas. In this work analytical methods were used (by analyzing approaches individually as well as synthetic methods (by assaying individual approaches in context of entirety. The work is a critical review of literature as well as a deductive analysis mingled with models proposed by authors through inductive analysis. Meta-analysis has been used to dissect the interaction and interdependence between leadership approaches.

Peripheral Nervous System Manifestations in Systemic Autoimmune Diseases

OpenAIRE

COJOCARU, Inimioara Mihaela; COJOCARU, Manole; SILOSI, Isabela; VRABIE, Camelia Doina

2014-01-01

The peripheral nervous system refers to parts of the nervous system outside the brain and spinal cord. Systemic autoimmune diseases can affect both the central and peripheral nervous systems in a myriad of ways and through a heterogeneous number of mechanisms leading to many different clinical manifestations. As a result, neurological complications of these disorders can result in significant morbidity and mortality. The most common complication of peripheral nervous system (PNS) involvement ...

Multibody Systems

DEFF Research Database (Denmark)

Wagner, Falko Jens

1999-01-01

Multibody Systems is one area, in which methods for solving DAEs are of special interst. This chapter is about multibody systems, why they result in DAE systems and what kind of problems that can arise when dealing with multibody systems and formulating their corresponding DAE system....

Engineering Elegant Systems: Postulates, Principles, and Hypotheses of Systems Engineering

Science.gov (United States)

Watson, Michael D.

2018-01-01

Definition: System Engineering is the engineering discipline which integrates the system functions, system environment, and the engineering disciplines necessary to produce and/or operate an elegant system; Elegant System - A system that is robust in application, fully meeting specified and adumbrated intent, is well structured, and is graceful in operation. Primary Focus: System Design and Integration: Identify system couplings and interactions; Identify system uncertainties and sensitivities; Identify emergent properties; Manage the effectiveness of the system. Engineering Discipline Integration: Manage flow of information for system development and/or operations; Maintain system activities within budget and schedule. Supporting Activities: Process application and execution.

Applying System of Systems Engineering(SoSE) to VIVO?

OpenAIRE

Wang, Jing

2015-01-01

System of systems (SoS) refers to a set of operational and managerial independent systems interacting with each other to provide capabilities which cannot be accomplished by any single system. SoS has its own characteristics and challenges, such as emergent behavior and evolutionary development. This presentation will: Introduce the concepts and characteristics of system of systems (SoS) and system thinking practice. discuss SoS challenges using SoS case studies such as Global Earth Observati...

Systems integration.

Science.gov (United States)

Siemieniuch, C E; Sinclair, M A

2006-01-01

The paper presents a view of systems integration, from an ergonomics/human factors perspective, emphasising the process of systems integration as is carried out by humans. The first section discusses some of the fundamental issues in systems integration, such as the significance of systems boundaries, systems lifecycle and systems entropy, issues arising from complexity, the implications of systems immortality, and so on. The next section outlines various generic processes for executing systems integration, to act as guides for practitioners. These address both the design of the system to be integrated and the preparation of the wider system in which the integration will occur. Then the next section outlines some of the human-specific issues that would need to be addressed in such processes; for example, indeterminacy and incompleteness, the prediction of human reliability, workload issues, extended situation awareness, and knowledge lifecycle management. For all of these, suggestions and further readings are proposed. Finally, the conclusions section reiterates in condensed form the major issues arising from the above.

Formal heterogeneous system modeling with SystemC

DEFF Research Database (Denmark)

Niaki, Seyed Hosein Attarzadeh; Jakobsen, Mikkel Koefoed; Sulonen, Tero

2012-01-01

Electronic System Level (ESL) design of embedded systems proposes raising the abstraction level of the design entry to cope with the increasing complexity of such systems. To exploit the benefits of ESL, design languages should allow specification of models which are a) heterogeneous, to describe...

System description of the Repository-Only System for the FY 1990 systems integration program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Repository-Only System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The Repository-Only System is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes disposal in the geologic repository. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. These descriptions contain the level of detail needed for the projected systems analysis studies. The Repository-Only System contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, a repository facility that packages the wastes and than emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the wastes between these major facilities. 18 refs., 39 figs

Tank waste remediation system systems engineering management plan

International Nuclear Information System (INIS)

Peck, L.G.

1998-01-01

This Systems Engineering Management Plan (SEMP) describes the Tank Waste Remediation System (TWRS) implementation of the US Department of Energy (DOE) systems engineering policy provided in 97-IMSD-193. The SEMP defines the products, process, organization, and procedures used by the TWRS Project to implement the policy. The SEMP will be used as the basis for tailoring the systems engineering applications to the development of the physical systems and processes necessary to achieve the desired end states of the program. It is a living document that will be revised as necessary to reflect changes in systems engineering guidance as the program evolves. The US Department of Energy-Headquarters has issued program management guidance, DOE Order 430. 1, Life Cycle Asset Management, and associated Good Practice Guides that include substantial systems engineering guidance

JOSHUA system

International Nuclear Information System (INIS)

Honeck, H.C.

1975-04-01

A major computational system called JOSHUA has been under development at the Savannah River Laboratory since 1968. The JOSHUA System has two major parts: the Operating System and the Application System. The Operating System has been in production use since 1970 and provides data management, terminal, and job execution facilities. The Application System uses these facilities in solving problems in reactor physics and engineering. Features of the Application System are the two-dimensional lattice physics and three-dimensional transient reactor physics capabilities, which have been in use since 1971 and 1974, respectively. The capabilities of the JOSHUA System are summarized, and statistics on size, use, and development effort are provided. (U.S.)

Integrating system safety into the basic systems engineering process

Science.gov (United States)

Griswold, J. W.

1971-01-01

The basic elements of a systems engineering process are given along with a detailed description of what the safety system requires from the systems engineering process. Also discussed is the safety that the system provides to other subfunctions of systems engineering.

A behavioral framework for compositionality: linear systems, discrete event systems and hybrid systems

NARCIS (Netherlands)

Anak Agung Julius, A.A.J.; van der Schaft, Arjan

2004-01-01

In this paper we formulate a general framework based on the behavioral approach to dynamical systems, in which various issues regarding interconnection of systems can be addressed. The main part of the framework is that interconnections or compositions of systems can be modelled with interconnection

The Creation of Differential Correction Systems and the Systems of Global Navigation Satellite System Monitoring

National Research Council Canada - National Science Library

Polishchuk, G. M; Kozlov, V. I; Urlichich, Y. M; Dvorkin, V. V; Gvozdev, V. V

2002-01-01

... for the Russian Federation and a system of global navigation satellite system monitoring. These projects are some of the basic ones in the Federal program "Global Navigation System," aimed at maintenance and development of the GLONASS system...

Solar power satellite system; Uchu hatsuden system

Energy Technology Data Exchange (ETDEWEB)

Sasaki, S [Institute of Space and Astronautical Science, Tokyo (Japan)

1995-09-05

The solar power satellite system is a system that converts solar energy into electric energy in the space, transmits power to earth through wireless resort such as microwave and supplies energy of new concept. In order to realize this system it is necessary to have new technologies such as space power transmission at low cost, construction of large space buildings and wireless high power transmission. In this paper, the principles, characteristics and the necessary technology of this system were explained. Besides Japan`s SPS2000 Plan (cooperative research by universities, government agencies and private corporations on the model of solar power satellite) the group of Europe, Russia and the United States has also proposed some ideas concerning the solar power satellite system. As far as the microwave power transmission, which is the key technology for solar power satellite system, is concerned, ground demonstration tests at the level of several tens of kW are discussed in Canada and France. 3 refs., 3 figs.

System Analysis and Risk Assessment (SARA) system

International Nuclear Information System (INIS)

Krantz, E.A.; Russell, K.D.; Stewart, H.D.; Van Siclen, V.S.

1986-01-01

Utilization of Probabilistic Risk Assessment (PRA) related information in the day-to-day operation of plant systems has, in the past, been impracticable due to the size of the computers needed to run PRA codes. This paper discusses a microcomputer-based database system which can greatly enhance the capability of operators or regulators to incorporate PRA methodologies into their routine decision making. This system is called the System Analysis and Risk Assessment (SARA) system. SARA was developed by EG and G Idaho, Inc. at the Idaho National Engineering Laboratory to facilitate the study of frequency and consequence analyses of accident sequences from a large number of light water reactors (LWRs) in this country. This information is being amassed by several studies sponsored by the United States Nuclear Regulatory Commission (USNRC). To meet the need of portability and accessibility, and to perform the variety of calculations necessary, it was felt that a microcomputer-based system would be most suitable

Dynamic Systems Modeling in Educational System Design & Policy

Science.gov (United States)

Groff, Jennifer Sterling

2013-01-01

Over the last several hundred years, local and national educational systems have evolved from relatively simple systems to incredibly complex, interdependent, policy-laden structures, to which many question their value, effectiveness, and direction they are headed. System Dynamics is a field of analysis used to guide policy and system design in…

Optimization of large-scale heterogeneous system-of-systems models.

Energy Technology Data Exchange (ETDEWEB)

Parekh, Ojas; Watson, Jean-Paul; Phillips, Cynthia Ann; Siirola, John; Swiler, Laura Painton; Hough, Patricia Diane (Sandia National Laboratories, Livermore, CA); Lee, Herbert K. H. (University of California, Santa Cruz, Santa Cruz, CA); Hart, William Eugene; Gray, Genetha Anne (Sandia National Laboratories, Livermore, CA); Woodruff, David L. (University of California, Davis, Davis, CA)

2012-01-01

Decision makers increasingly rely on large-scale computational models to simulate and analyze complex man-made systems. For example, computational models of national infrastructures are being used to inform government policy, assess economic and national security risks, evaluate infrastructure interdependencies, and plan for the growth and evolution of infrastructure capabilities. A major challenge for decision makers is the analysis of national-scale models that are composed of interacting systems: effective integration of system models is difficult, there are many parameters to analyze in these systems, and fundamental modeling uncertainties complicate analysis. This project is developing optimization methods to effectively represent and analyze large-scale heterogeneous system of systems (HSoS) models, which have emerged as a promising approach for describing such complex man-made systems. These optimization methods enable decision makers to predict future system behavior, manage system risk, assess tradeoffs between system criteria, and identify critical modeling uncertainties.

System Design of the SWRL Financial System.

Science.gov (United States)

Ikeda, Masumi

To produce various management and accounting reports in order to maintain control of SWRL (Southwest Regional Laboratory) operational and financial activities, a computer-based SWRL financial system was developed. The system design is outlined, and various types of system inputs described. The kinds of management and accounting reports generated…

Test System Impact on System Availability

DEFF Research Database (Denmark)

Pau, L. F.

1987-01-01

The specifications are presented for an imperfect automatic test system (ATS) (test frequency distribution, reliability, false alarm rate, nondetection rate) in order to account for the availability, readiness, mean time between unscheduled repairs (MTBUR), reliability, and maintenance of the sys......The specifications are presented for an imperfect automatic test system (ATS) (test frequency distribution, reliability, false alarm rate, nondetection rate) in order to account for the availability, readiness, mean time between unscheduled repairs (MTBUR), reliability, and maintenance...... of the system subject to monitoring and test. A time-dependent Markov model is presented, and applied in three cases, with examples of numerical results provided for preventive maintenance decisions, design of an automatic test system, buffer testing in computers, and data communications....

Cognitive Systems

DEFF Research Database (Denmark)

The tutorial will discuss the definition of cognitive systems as the possibilities to extend the current systems engineering paradigm in order to perceive, learn, reason and interact robustly in open-ended changing environments. I will also address cognitive systems in a historical perspective...... to be modeled within a limited set of predefined specifications. There will inevitably be a need for robust decisions and behaviors in novel situations that include handling of conflicts and ambiguities based on the capability and knowledge of the artificial cognitive system. Further, there is a need...... in cognitive systems include e.g. personalized information systems, sensor network systems, social dynamics system and Web2.0, and cognitive components analysis. I will use example from our own research and link to other research activities....

What Is Energy Systems Integration? | Energy Systems Integration Facility |

Science.gov (United States)

NREL What Is Energy Systems Integration? What Is Energy Systems Integration? Energy systems integration (ESI) is an approach to solving big energy challenges that explores ways for energy systems to Research Community NREL is a founding member of the International Institute for Energy Systems Integration

MARBLE: A system for executing expert systems in parallel

Science.gov (United States)

Myers, Leonard; Johnson, Coe; Johnson, Dean

1990-01-01

This paper details the MARBLE 2.0 system which provides a parallel environment for cooperating expert systems. The work has been done in conjunction with the development of an intelligent computer-aided design system, ICADS, by the CAD Research Unit of the Design Institute at California Polytechnic State University. MARBLE (Multiple Accessed Rete Blackboard Linked Experts) is a system of C Language Production Systems (CLIPS) expert system tool. A copied blackboard is used for communication between the shells to establish an architecture which supports cooperating expert systems that execute in parallel. The design of MARBLE is simple, but it provides support for a rich variety of configurations, while making it relatively easy to demonstrate the correctness of its parallel execution features. In its most elementary configuration, individual CLIPS expert systems execute on their own processors and communicate with each other through a modified blackboard. Control of the system as a whole, and specifically of writing to the blackboard is provided by one of the CLIPS expert systems, an expert control system.

System dynamics

International Nuclear Information System (INIS)

Kim, Do Hun; Mun, Tae Hun; Kim, Dong Hwan

1999-02-01

This book introduces systems thinking and conceptual tool and modeling tool of dynamics system such as tragedy of single thinking, accessible way of system dynamics, feedback structure and causal loop diagram analysis, basic of system dynamics modeling, causal loop diagram and system dynamics modeling, information delay modeling, discovery and application for policy, modeling of crisis of agricultural and stock breeding products, dynamic model and lesson in ecosystem, development and decadence of cites and innovation of education forward system thinking.

Thermal systems; Systemes thermiques

Energy Technology Data Exchange (ETDEWEB)

Lalot, S. [Valenciennes Univ. et du Hainaut Cambresis, LME, 59 (France); Lecoeuche, S. [Ecole des Mines de Douai, Dept. GIP, 59 - Douai (France)]|[Lille Univ. des Sciences et Technologies, 59 - Villeneuve d' Ascq (France); Ahmad, M.; Sallee, H.; Quenard, D. [CSTB, 38 - Saint Martin d' Heres (France); Bontemps, A. [Universite Joseph Fourier, LEGI/GRETh, 38 - Grenoble (France); Gascoin, N.; Gillard, P.; Bernard, S. [Laboratoire d' Energetique, Explosion, Structure, 18 - Bourges (France); Gascoin, N.; Toure, Y. [Laboratoire Vision et Robotique, 18 - Bourges (France); Daniau, E.; Bouchez, M. [MBDA, 18 - Bourges (France); Dobrovicescu, A.; Stanciu, D. [Bucarest Univ. Polytechnique, Faculte de Genie Mecanique (Romania); Stoian, M. [Reims Univ. Champagne Ardenne, Faculte des Sciences, UTAP/LTM, 51 (France); Bruch, A.; Fourmigue, J.F.; Colasson, S. [CEA Grenoble, Lab. Greth, 38 (France); Bontemps, A. [Universite Joseph Fourier, LEGI/GRETh, 38 - Grenoble (France); Voicu, I.; Mare, T.; Miriel, J. [Institut National des Sciences Appliquees (INSA), LGCGM, IUT, 35 - Rennes (France); Galanis, N. [Sherbrooke Univ., Genie Mecanique, QC (Canada); Nemer, M.; Clodic, D. [Ecole des Mines de Paris, Centre Energetique et Procedes, 75 (France); Lasbet, Y.; Auvity, B.; Castelain, C.; Peerhossaini, H. [Nantes Univ., Ecole Polytechnique, Lab. de Thermocinetiquede Nantes, UMR-CNRS 6607, 44 (France)

2005-07-01

This session about thermal systems gathers 26 articles dealing with: neural model of a compact heat exchanger; experimental study and numerical simulation of the thermal behaviour of test-cells with walls made of a combination of phase change materials and super-insulating materials; hydraulic and thermal modeling of a supercritical fluid with pyrolysis inside a heated channel: pre-dimensioning of an experimental study; energy analysis of the heat recovery devices of a cryogenic system; numerical simulation of the thermo-hydraulic behaviour of a supercritical CO{sub 2} flow inside a vertical tube; mixed convection inside dual-tube exchangers; development of a nodal approach with homogenization for the simulation of the brazing cycle of a heat exchanger; chaotic exchanger for the cooling of low temperature fuel cells; structural optimization of the internal fins of a cylindrical generator; a new experimental approach for the study of the local boiling inside the channels of exchangers with plates and fins; experimental study of the flow regimes of boiling hydrocarbons on a bundle of staggered tubes; energy study of heat recovery exchangers used in Claude-type refrigerating systems; general model of Carnot engine submitted to various operating constraints; the free pistons Stirling cogeneration system; natural gas supplied cogeneration system with polymer membrane fuel cell; influence of the CRN coating on the heat flux inside the tool during the wood unrolling process; transport and mixture of a passive scalar injected inside the wake of a Ahmed body; control of a laser welding-brazing process by infrared thermography; 2D self-adaptative method for contours detection: application to the images of an aniso-thermal jet; exergy and exergy-economical study of an 'Ericsson' engine-based micro-cogeneration system; simplified air-conditioning of telephone switching equipments; parametric study of the 'low-energy' individual dwelling; brief synthesis of

Embedded Systems

Indian Academy of Sciences (India)

Embedded system, micro-con- troller ... Embedded systems differ from general purpose computers in many ... Low cost: As embedded systems are extensively used in con- .... operating systems for the desktop computers where scheduling.

Understanding Patterns for System-of-Systems Integration

DEFF Research Database (Denmark)

Kazman, Rick; Nielsen, Claus Ballegård; Schmid, Klaus

Creating a successful system of systems—one that meets the needs of its stakeholders today and can evolve and scale to sustain those stakeholders into the future—is a very complex engineering challenge. In a system of systems (SoS), one of the biggest challenges is in achieving cooperation and in...

Cold Vacuum Drying (CVD) Facility Vacuum Purge System Chilled Water System Design Description. System 47-4

International Nuclear Information System (INIS)

IRWIN, J.J.

2000-01-01

This system design description (SDD) addresses the Vacuum Purge System Chilled Water (VPSCHW) system. The discussion that follows is limited to the VPSCHW system and its interfaces with associated systems. The reader's attention is directed to Drawings H-1-82162, Cold Vacuum Drying Facility Process Equipment Skid PandID Vacuum System, and H-1-82224, Cold Vacuum Drying Facility Mechanical Utilities Process Chilled Water PandID. Figure 1-1 shows the location and equipment arrangement for the VPSCHW system. The VPSCHW system provides chilled water to the Vacuum Purge System (VPS). The chilled water provides the ability to condense water from the multi-canister overpack (MCO) outlet gases during the MCO vacuum and purge cycles. By condensing water from the MCO purge gas, the VPS can assist in drying the contents of the MCO

Power system protection 2 systems and methods

CERN Document Server

1995-01-01

The worldwide growth in demand for electricity has forced the pace of developments in electrical power system design to meet consumer needs for reliable, secure and cheap supplies. Power system protection, as a technology essential to high quality supply, is widely recognised as a specialism of growing and often critical importance, in which power system needs and technological progress have combined to result in rapid developments in policy and practice in recent years. In the United Kingdom, the need for appropriate training in power system protection was recognised in the early 1960s with t

Degradable Systems: A Survey of Multistate System Theory.

Science.gov (United States)

1982-08-01

and Subtitle) S. TYPE OF REPORT & PERIOD COVERED C. O DEGRADABLE SYSTEMS: A SURVEY OF MULTISTATE TECHNICAL SYSTEM THEORY 6. PERFORMING ORG. REPORT...THIS PAGE(R7,en Date £nt.,.d) AEoS-T- 8- 9 2 0 Degradable Systems: A Survey of Multistate System Theory by 1 2Emad El-Neweihi and Frank Proschan

Holographic representation of space-variant systems: system theory.

Science.gov (United States)

Marks Ii, R J; Krile, T F

1976-09-01

System theory for holographic representation of linear space-variant systems is derived. The utility of the resulting piecewise isoplanatic approximation (PIA) is illustrated by example application to the invariant system, ideal magnifier, and Fourier transformer. A method previously employed to holographically represent a space-variant system, the discrete approximation, is shown to be a special case of the PIA.

General Systems Theory and Instructional Systems Design.

Science.gov (United States)

Salisbury, David F.

1990-01-01

Describes basic concepts in the field of general systems theory (GST) and identifies commonalities that exist between GST and instructional systems design (ISD). Models and diagrams that depict system elements in ISD are presented, and two matrices that show how GST has been used in ISD literature are included. (11 references) (LRW)

Construction of test-bed system of voltage management system to ...

African Journals Online (AJOL)

Construction of test-bed system of voltage management system to apply physical power system. ... Journal of Fundamental and Applied Sciences ... system of voltage management system (VMS) in order to apply physical power system.

Next generation railway system. ; Control system for JR Maglev. Jisedai tetsudo system. ; Rinia shinkansen no seigyo system

Energy Technology Data Exchange (ETDEWEB)

Matsuda, K [Central Japan Railway Company, Nagoya (Japan)

1993-07-10

Aiming at achieving a maglev Shinkansen that links Tokyo with Osaka at a speed of 500 km/h, an experimental maglev line is being constructed in Yamanashi Prefecture. This paper explains a train control system as the main subject. The system mounts superconductive magnets directly on bogies to propel a train using actions of moving magnet fields generated from propulsion coils paved on ground. Because of its mechanism to levitate and guide the train using induction coils superposed on the propulsion coils, no special control device is required for the levitation and guidance. This is a difference from a normal conduction magnet levitation system. Its speed control also differs from the conventional railway systems. It uses a ground primary control system that controls supply currents from substations on the ground, including braking control. One substation controls one train only. Automatic control is made on all controls related to travelling, including a control from train movement start to stops at predetermined positions, scheduled-time operation control, and jerk control. The construction of the experimental line is under steady progress. 5 figs.

78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

Science.gov (United States)

2013-03-26

...-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System... applicable sections. The Federal Prevailing Rate Advisory Committee, the national labor- management committee... proposing to amend 5 CFR part 532 as follows: PART 532--PREVAILING RATE SYSTEMS 0 1. The authority citation...

Systems engineering simplified

CERN Document Server

Cloutier, Robert; Bone, Mary Alice

2015-01-01

IntroductionOverviewDiscussion of Common TerminologyThe Case for Systems EngineeringA Brief History of Systems EngineeringSystem ExamplesSummaryThe System Life CycleManaging System Development-The Vee ModelSystem ProductionSystem Utilization and SupportSystem Retirement and DisposalOther Systems Engineering Development ModelsSpiral ModelAgile Model for Systems EngineeringSystem of InterestAbstraction and DecompositionIntegrationDeveloping and Managing RequirementsCyclone Requiremen

Expert Systems for auditing management information systems

Directory of Open Access Journals (Sweden)

Gheroghe Popescu

2007-05-01

Full Text Available Expert systems are built with the help of: specialised programming languages or expert system generators (shell. But this structure was reached after tens of years of work and research, because expert systems are nothing but pragmatic capitalisation of the results of research carried out in artificial intelligence and theory of knowledge.

System and method for creating expert systems

Science.gov (United States)

Hughes, Peter M. (Inventor); Luczak, Edward C. (Inventor)

1998-01-01

A system and method provides for the creation of a highly graphical expert system without the need for programming in code. An expert system is created by initially building a data interface, defining appropriate Mission, User-Defined, Inferred, and externally-generated GenSAA (EGG) data variables whose data values will be updated and input into the expert system. Next, rules of the expert system are created by building appropriate conditions of the rules which must be satisfied and then by building appropriate actions of rules which are to be executed upon corresponding conditions being satisfied. Finally, an appropriate user interface is built which can be highly graphical in nature and which can include appropriate message display and/or modification of display characteristics of a graphical display object, to visually alert a user of the expert system of varying data values, upon conditions of a created rule being satisfied. The data interface building, rule building, and user interface building are done in an efficient manner and can be created without the need for programming in code.

Bitcoin System

Directory of Open Access Journals (Sweden)

Jan Lánský

2017-06-01

Full Text Available Cryptocurrency systems are purely digital and decentralized systems that use cryptographic principles to confirm transactions. Bitcoin is the first and also the most widespread cryptocurrency. The aim of this article is to introduce Bitcoin system using a language understandable also to readers without computer science education. This article captures the Bitcoin system from three perspectives: internal structure, network and users. Emphasis is placed on brief and clear definitions (system components and their mutual relationships. A new system view of the stated terms constitutes author’s own contribution.

Waste receiving and processing plant control system; system design description

Energy Technology Data Exchange (ETDEWEB)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

Waste receiving and processing plant control system; system design description

International Nuclear Information System (INIS)

LANE, M.P.

1999-01-01

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1

Supporting Space Systems Design via Systems Dependency Analysis Methodology

Science.gov (United States)

Guariniello, Cesare

The increasing size and complexity of space systems and space missions pose severe challenges to space systems engineers. When complex systems and Systems-of-Systems are involved, the behavior of the whole entity is not only due to that of the individual systems involved but also to the interactions and dependencies between the systems. Dependencies can be varied and complex, and designers usually do not perform analysis of the impact of dependencies at the level of complex systems, or this analysis involves excessive computational cost, or occurs at a later stage of the design process, after designers have already set detailed requirements, following a bottom-up approach. While classical systems engineering attempts to integrate the perspectives involved across the variety of engineering disciplines and the objectives of multiple stakeholders, there is still a need for more effective tools and methods capable to identify, analyze and quantify properties of the complex system as a whole and to model explicitly the effect of some of the features that characterize complex systems. This research describes the development and usage of Systems Operational Dependency Analysis and Systems Developmental Dependency Analysis, two methods based on parametric models of the behavior of complex systems, one in the operational domain and one in the developmental domain. The parameters of the developed models have intuitive meaning, are usable with subjective and quantitative data alike, and give direct insight into the causes of observed, and possibly emergent, behavior. The approach proposed in this dissertation combines models of one-to-one dependencies among systems and between systems and capabilities, to analyze and evaluate the impact of failures or delays on the outcome of the whole complex system. The analysis accounts for cascading effects, partial operational failures, multiple failures or delays, and partial developmental dependencies. The user of these methods can

Embedded systems handbook networked embedded systems

CERN Document Server

Zurawski, Richard

2009-01-01

Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area

Modern system architectures in embedded systems

International Nuclear Information System (INIS)

Korhonen, T.

2012-01-01

Several new technologies are making their way also in embedded systems. In addition to the FPGA technology which has become commonplace, multi-core CPUs and I/O virtualization (the implementation of the tasks of a software hyper-visor in hardware to improve the efficiency) are being introduced to the embedded systems. In this paper we review the trends and discuss how to take advantage of these features in control systems. Some potential application examples like parallelization, data streaming, high-speed data acquisition and virtualization are discussed

Nonlinearity of colloid systems oxyhydrate systems

CERN Document Server

Sucharev, Yuri I

2008-01-01

The present monograph is the first systematic study of the non-linear characteristic of gel oxy-hydrate systems involving d- and f- elements. These are the oxyhydrates of rare-earth elements and oxides - hydroxides of d- elements (zirconium, niobium, titanium, etc.) The non-linearity of these gel systems introduces fundamental peculiarities into their structure and, consequently, their properties. The polymer-conformational diversity of energetically congenial gel fragments, which continu-ously transform under the effect of, for instance, system dissipation heat, is central to the au-thor's hy

Systems of Systems: Scaling up the Development Program

National Research Council Canada - National Science Library

Humphrey, Watts

2006-01-01

... into system-of-systems structures. Section 3 points out how large-scale systems development efforts have typically failed because of project-management and not technical problems, and that the solutions to these problems...

COGNITIVE SYSTEMS. REDEFINING THE COOPERATION BETWEEN MAN AND SYSTEM

Directory of Open Access Journals (Sweden)

Diana-Aderina MOISUC

2016-12-01

Full Text Available Cognitive systems appeared as a response to the real challenges brought by the Big Data phenomenon. It was found that the solutions for solving difficult problems caused by this phenomenon could be brought by using artificial intelligence tools. In this context a convergence between Big Data and Artificial Intelligence happened, which determined the start of a new stage in system development, namely the era of cognitive systems. The potential of these systems is given by the characteristics that differentiate them from other systems. The cognitive systems offered solutions and were used with success in complex projects from the medical and financial sectors. The architecture of cognitive systems is complex. These systems are designed so that they use artificial intelligence tools when processing source content, producing analytical solutions which can be used in the decision process. In this paper base concepts, the characteristics and architecture of cognitive systems, the benefits brought by the development and use of them were presented.

Systems effectiveness

CERN Document Server

Habayeb, A R

1987-01-01

Highlights three principal applications of system effectiveness: hardware system evaluation, organizational development and evaluation, and conflict analysis. The text emphasizes the commonality of the system effectiveness discipline. The first part of the work presents a framework for system effectiveness, partitioning and hierarchy of hardware systems. The second part covers the structure, hierarchy, states, functions and activities of organizations. Contains an extended Appendix on mathematical concepts and also several project suggestions.

Auxiliary systems

International Nuclear Information System (INIS)

Meyer, P.J.

1981-01-01

Systems included under the heading ''Reactor Auxillary Systems'' are those immediately involved with the reactor operation. These include the systems for dosing and letdown of reactor coolant, as well as for the chemical dosing, purification and treatment of the reactor coolant and the cooling system in the controlled area. The ancillary systems are mainly responsible for liquid and gaseous treatment and the waste treatment for final storage. (orig.)

Situation Awareness with Systems of Systems

NARCIS (Netherlands)

Laar, P. van de; Tretmans, J.; Borth, M.

2013-01-01

This book discusses various aspects, challenges, and solutions for developing systems-of-systems for situation awareness, using applications in the domain of maritime safety and security. Topics include advanced, multi-objective visualization methods for situation awareness, stochastic outlier

3S - Systematic, systemic, and systems biology and toxicology.

Science.gov (United States)

Smirnova, Lena; Kleinstreuer, Nicole; Corvi, Raffaella; Levchenko, Andre; Fitzpatrick, Suzanne C; Hartung, Thomas

2018-01-01

A biological system is more than the sum of its parts - it accomplishes many functions via synergy. Deconstructing the system down to the molecular mechanism level necessitates the complement of reconstructing functions on all levels, i.e., in our conceptualization of biology and its perturbations, our experimental models and computer modelling. Toxicology contains the somewhat arbitrary subclass "systemic toxicities"; however, there is no relevant toxic insult or general disease that is not systemic. At least inflammation and repair are involved that require coordinated signaling mechanisms across the organism. However, the more body components involved, the greater the challenge to reca-pitulate such toxicities using non-animal models. Here, the shortcomings of current systemic testing and the development of alternative approaches are summarized. We argue that we need a systematic approach to integrating existing knowledge as exemplified by systematic reviews and other evidence-based approaches. Such knowledge can guide us in modelling these systems using bioengineering and virtual computer models, i.e., via systems biology or systems toxicology approaches. Experimental multi-organ-on-chip and microphysiological systems (MPS) provide a more physiological view of the organism, facilitating more comprehensive coverage of systemic toxicities, i.e., the perturbation on organism level, without using substitute organisms (animals). The next challenge is to establish disease models, i.e., micropathophysiological systems (MPPS), to expand their utility to encompass biomedicine. Combining computational and experimental systems approaches and the chal-lenges of validating them are discussed. The suggested 3S approach promises to leverage 21st century technology and systematic thinking to achieve a paradigm change in studying systemic effects.

Smart power systems and renewable energy system integration

CERN Document Server

2016-01-01

This monograph presents a wider spectrum of researches, developments, and case specific studies in the area of smart power systems and integration of renewable energy systems. The book will be for the benefit of a wider audience including researchers, postgraduate students, practicing engineers, academics, and regulatory policy makers. It covers a wide range of topics from fundamentals, and modelling and simulation aspects of traditional and smart power systems to grid integration of renewables; Micro Grids; challenges in planning and operation of a smart power system; risks, security, and stability in smart operation of a power system; and applied research in energy storage. .

An algebraic method for system reduction of stationary Gaussian systems

NARCIS (Netherlands)

D. Jibetean; J.H. van Schuppen (Jan)

2003-01-01

textabstractSystem identification for a particular approach reduces to system reduction, determining for a system with a high state-space dimension a system of low state-space dimension. For Gaussian systems the problem of system reduction is considered with the divergence rate criterion. The

Open systems dependability dependability engineering for ever-changing systems

CERN Document Server

Tokoro, Mario

2015-01-01

The book describes a fundamentally new approach to software dependability, considering a software system as an ever-changing system due to changes in service objectives, users' requirements, standards and regulations, and to advances in technology. Such a system is viewed as an Open System since its functions, structures, and boundaries are constantly changing. Thus, the approach to dependability is called Open Systems Dependability. The DEOS technology realizes Open Systems Dependability. It puts more emphasis on stakeholders' agreement and accountability achievement for business/service cont

System of Systems Analytic Workbench - 2017

Science.gov (United States)

2017-08-31

Genetic Algorithm and Particle Swarm Optimization with Type-2 Fuzzy Sets for Generating Systems of Systems Architectures. Procedia Computer Science...The application effort involves modeling an existing messaging network to perform real-time situational awareness. The Analytical Workbench’s

System Modeling and Trust Evaluation of Distributed Systems

OpenAIRE

Alhadad , Nagham; Serrano-Alvarado , Patricia; Busnel , Yann; Lamarre , Philippe

2015-01-01

International audience; Nowadays, digital systems are connected through complex architectures. These systems involve persons, physical and digital resources such that we can consider that a system consists of elements from two worlds, the social world and the digital world, and their relations. Users perform activities like chatting, buying, sharing data, etc. Evaluating and choosing appropriate systems involve aspects like functionality, performance, QoS, ease of use, or price. Recently, tru...

Systems thinking.

Science.gov (United States)

Cabrera, Derek; Colosi, Laura; Lobdell, Claire

2008-08-01

Evaluation is one of many fields where "systems thinking" is popular and is said to hold great promise. However, there is disagreement about what constitutes systems thinking. Its meaning is ambiguous, and systems scholars have made diverse and divergent attempts to describe it. Alternative origins include: von Bertalanffy, Aristotle, Lao Tsu or multiple aperiodic "waves." Some scholars describe it as synonymous with systems sciences (i.e., nonlinear dynamics, complexity, chaos). Others view it as taxonomy-a laundry list of systems approaches. Within so much noise, it is often difficult for evaluators to find the systems thinking signal. Recent work in systems thinking describes it as an emergent property of four simple conceptual patterns (rules). For an evaluator to become a "systems thinker", he or she need not spend years learning many methods or nonlinear sciences. Instead, with some practice, one can learn to apply these four simple rules to existing evaluation knowledge with transformative results.

Physical system requirements: Overall system

International Nuclear Information System (INIS)

1992-01-01

The Nuclear Waste Policy Act (NWPA) of 1982 assigned to the Department of Energy (DOE) the responsibility for managing the disposal of spent nuclear fuel and high-level radioactive waste and established the Office of Civilian Radioactive Waste Management (OCRWM) for that purpose. The Secretary of Energy, in his November 1989 report to Congress (DOE/RW-0247), announced three new initiatives for conduct of the Civilian Radioactive Waste Management (CRWM) program. One of these initiatives was to establish improved management structure and procedures. In response, OCRWM performed a management study and the Direct subsequently issued the Management Systems Improvement Strategy (MSIS) on August 10, 1990, calling for a rigorous implementation of systems engineering principles with a special emphasis on functional analysis. This approach establishes a framework for integrating the program management efforts with the technical requirements analysis into a single, unified, and consistent program. The functional analysis approach recognizes that just the facilities and equipment comprising the physical waste management system must perform certain functions, so must certain programmatic and management functions be performed within the program in order to successfully bring the physical system into being

Using system dynamics simulation for assessment of hydropower system safety

Science.gov (United States)

King, L. M.; Simonovic, S. P.; Hartford, D. N. D.

2017-08-01

Hydropower infrastructure systems are complex, high consequence structures which must be operated safely to avoid catastrophic impacts to human life, the environment, and the economy. Dam safety practitioners must have an in-depth understanding of how these systems function under various operating conditions in order to ensure the appropriate measures are taken to reduce system vulnerability. Simulation of system operating conditions allows modelers to investigate system performance from the beginning of an undesirable event to full system recovery. System dynamics simulation facilitates the modeling of dynamic interactions among complex arrangements of system components, providing outputs of system performance that can be used to quantify safety. This paper presents the framework for a modeling approach that can be used to simulate a range of potential operating conditions for a hydropower infrastructure system. Details of the generic hydropower infrastructure system simulation model are provided. A case study is used to evaluate system outcomes in response to a particular earthquake scenario, with two system safety performance measures shown. Results indicate that the simulation model is able to estimate potential measures of system safety which relate to flow conveyance and flow retention. A comparison of operational and upgrade strategies is shown to demonstrate the utility of the model for comparing various operational response strategies, capital upgrade alternatives, and maintenance regimes. Results show that seismic upgrades to the spillway gates provide the largest improvement in system performance for the system and scenario of interest.

System Study: Emergency Power System 1998-2014

Energy Technology Data Exchange (ETDEWEB)

Schroeder, John Alton [Idaho National Lab. (INL), Idaho Falls, ID (United States). Risk Assessment and Management Services Dept.

2015-12-01

This report presents an unreliability evaluation of the emergency power system (EPS) at 104 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2014 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10 year period while yearly estimates for system unreliability are provided for the entire active period. An extremely statistically significant increasing trend was observed for EPS system unreliability for an 8-hour mission. A statistically significant increasing trend was observed for EPS system start-only unreliability.

A Sustainable, Reliable Mission-Systems Architecture that Supports a System of Systems Approach to Space Exploration

Science.gov (United States)

Watson, Steve; Orr, Jim; O'Neil, Graham

2004-01-01

A mission-systems architecture based on a highly modular "systems of systems" infrastructure utilizing open-standards hardware and software interfaces as the enabling technology is absolutely essential for an affordable and sustainable space exploration program. This architecture requires (a) robust communication between heterogeneous systems, (b) high reliability, (c) minimal mission-to-mission reconfiguration, (d) affordable development, system integration, and verification of systems, and (e) minimum sustaining engineering. This paper proposes such an architecture. Lessons learned from the space shuttle program are applied to help define and refine the model.

Conceptual System of Systems Enabling Maritime Dominance in the Littorals

National Research Council Canada - National Science Library

Holmes, Matt

2004-01-01

.... Focusing on only system-of systems (SoS) concepts, we consider a system of only manned platforms, a system of primarily unmanned platforms, and a balanced hybrid system of manned and unmanned platforms...

Airport Information Retrieval System (AIRS) System Support Manual

Science.gov (United States)

1973-01-01

This handbook is a support manual for prototype air traffic flow control automation system developed for the FAA's Systems Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load prediction...

Reliability-Based Optimization of Series Systems of Parallel Systems

DEFF Research Database (Denmark)

Enevoldsen, I.; Sørensen, John Dalsgaard

Reliability-based design of structural systems is considered. Especially systems where the reliability model is a series system of parallel systems are analysed. A sensitivity analysis for this class of problems is presented. Direct and sequential optimization procedures to solve the optimization...

NASA Advanced Exploration Systems: Advancements in Life Support Systems

Science.gov (United States)

Shull, Sarah A.; Schneider, Walter F.

2016-01-01

The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA’s Habitability Architecture Team.

Supervisory Control and Diagnostics System Distributed Operating System

International Nuclear Information System (INIS)

McGoldrick, P.R.

1979-01-01

This paper contains a description of the Supervisory Control and Diagnostics System (SCDS) Distributed Operating System. The SCDS consists of nine 32-bit minicomputers with shared memory. The system's main purpose is to control a large Mirror Fusion Test Facility

Optimization of System Maturity and Equivalent System Mass for Exploration Systems Development Planning

Science.gov (United States)

Magnaye, Romulo; Tan, Weiping; Ramirez-Marquez, Jose; Sauser, Bruce

2010-01-01

The Exploration Systems Mission Directorate of the National Aeronautics and Space Administration (NASA) is currently pursuing the development of the next generation of human spacecraft and exploration systems throughout the Constellation Program. This includes, among others, habitation technologies for supporting lunar and Mars exploration. The key to these systems is the Exploration Life Support (ELS) system that composes several technology development projects related to atmosphere revitalization, water recovery, waste management and habitation. The proper functioning of these technologies is meant to produce sufficient and balanced resources of water, air, and food to maintain a safe and comfortable environment for long-term human habitation and exploration of space.

Measurement system as a subsystem of the quality management system

Directory of Open Access Journals (Sweden)

Ľubica Floreková

2006-12-01

Full Text Available Each measurement system and a control principle must be based on certain facts about the system behaviour (what, operation (how and structure (why. Each system is distributed into subsystems that provide an input for the next subsystem. For each system, start is important the begin, that means system characteristics, collecting of data, its hierarchy and the processes distribution.A measurement system (based on the chapter 8 of the standard ISO 9001:2000 Quality management system, requirements defines the measurement, analysis and improvement for each organization in order to present the products conformity, the quality management system conformity guarantee and for the continuously permanent improvement of effectivity, efficiency and economy of quality management system.

Emergent nested systems a theory of understanding and influencing complex systems as well as case studies in urban systems

CERN Document Server

Walloth, Christian

2016-01-01

This book presents a theory as well as methods to understand and to purposively influence complex systems. It suggests a theory of complex systems as nested systems, i. e. systems that enclose other systems and that are simultaneously enclosed by even other systems. According to the theory presented, each enclosing system emerges through time from the generative activities of the systems they enclose. Systems are nested and often emerge unplanned, and every system of high dynamics is enclosed by a system of slower dynamics. An understanding of systems with faster dynamics, which are always guided by systems of slower dynamics, opens up not only new ways to understanding systems, but also to effectively influence them. The aim and subject of this book is to lay out these thoughts and explain their relevance to the purposive development of complex systems, which are exemplified in case studies from an urban system. The interested reader, who is not required to be familiar with system-theoretical concepts or wit...

Quality management system

Energy Technology Data Exchange (ETDEWEB)

Lee, Mu Sung

2009-08-15

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Quality management system

International Nuclear Information System (INIS)

Lee, Mu Sung

2009-08-01

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Proposing a Process-Oriented Systems Research for Systems Thinking Development

Directory of Open Access Journals (Sweden)

Jae Eon Yu

2017-04-01

Full Text Available This paper discusses systems thinking development from Churchman’s systems ideas related to critical systems practice that appreciates the use of systems methods from sociolinguistic perspectives and poststructuralist thought. Systems research enabled us to understand and reinterpret Churchman’s philosophy and systems approach through the works of Deleuze and Foucault. Based upon the interpretation of Churchman’s philosophy and systems approach, I propose ‘process-oriented systems research’ developed from the use of social appreciative process and Churchman’s metasystem approach. By applying a metasystem approach into practice, I basically appreciate Deleuzian ethics and Foucault’s theory of discourse in order to deal with issues of power and knowledge, and metaethics or moral epistemology, where the meaning of good or bad is discussed. A detailed account of an application of process-oriented systems research is given to demonstrate how I use systems methods to examine the usefulness of the systems research in practice.

Measurement system as a subsystem of the quality management system

OpenAIRE

Ľubica Floreková; Ján Terpák; Marcela Čarnogurská

2006-01-01

Each measurement system and a control principle must be based on certain facts about the system behaviour (what), operation (how) and structure (why). Each system is distributed into subsystems that provide an input for the next subsystem. For each system, start is important the begin, that means system characteristics, collecting of data, its hierarchy and the processes distribution.A measurement system (based on the chapter 8 of the standard ISO 9001:2000 Quality management system, requirem...

Study on Korean Radiological Emergency System-Care System- and National Nuclear Emergency Preparedness System Development

International Nuclear Information System (INIS)

Akhmad Khusyairi; Yudi Pramono

2008-01-01

Care system; Radiological Emergency Supporting System. Environmental radiology level is the main aspect that should be concerned deal with the utilization of nuclear energy. The usage of informational technology in nuclear area gives significant contribution to anticipate and to protect human and environment. Since 1960, South Korea has developed environment monitoring system as the effort to protect the human and environment in the radiological emergency condition. Indonesia has possessed several nuclear installations and planned to build and operate nuclear power plants (PLTN) in the future. Therefore, Indonesia has to prepare the integrated system, technically enables to overcome the radiological emergency. Learning from the practice in South Korea, the system on the radiological emergency should be prepared and applied in Indonesia. However, the government regulation draft on National Radiological Emergency System, under construction, only touches the management aspect, not the technical matters. Consequently, when the regulation is implemented, it will need an additional regulation on technical aspect including the consideration on the system (TSS), the organization of operator and the preparation of human resources development of involved institution. For that purpose, BAPETEN should have a typical independence system in regulatory frame work. (author)

System-level musings about system-level science (Invited)

Science.gov (United States)

Liu, W.

2009-12-01

In teleology, a system has a purpose. In physics, a system has a tendency. For example, a mechanical system has a tendency to lower its potential energy. A thermodynamic system has a tendency to increase its entropy. Therefore, if geospace is seen as a system, what is its tendency? Surprisingly or not, there is no simple answer to this question. Or, to flip the statement, the answer is complex, or complexity. We can understand generally why complexity arises, as the geospace boundary is open to influences from the solar wind and Earth’s atmosphere and components of the system couple to each other in a myriad of ways to make the systemic behavior highly nonlinear. But this still begs the question: What is the system-level approach to geospace science? A reductionist view might assert that as our understanding of a component or subsystem progresses to a certain point, we can couple some together to understand the system on a higher level. However, in practice, a subsystem can almost never been observed in isolation with others. Even if such is possible, there is no guarantee that the subsystem behavior will not change when coupled to others. Hence, there is no guarantee that a subsystem, such as the ring current, has an innate and intrinsic behavior like a hydrogen atom. An absolutist conclusion from this logic can be sobering, as one would have to trace a flash of aurora to the nucleosynthesis in the solar core. The practical answer, however, is more promising; it is a mix of the common sense we call reductionism and awareness that, especially when strongly coupled, subsystems can experience behavioral changes, breakdowns, and catastrophes. If the stock answer to the systemic tendency of geospace is complexity, the objective of the system-level approach to geospace science is to define, measure, and understand this complexity. I will use the example of magnetotail dynamics to illuminate some key points in this talk.

Open System Architecture design for planet surface systems

Science.gov (United States)

Petri, D. A.; Pieniazek, L. A.; Toups, L. D.

1992-01-01

The Open System Architecture is an approach to meeting the needs for flexibility and evolution of the U.S. Space Exploration Initiative program of the manned exploration of the solar system and its permanent settlement. This paper investigates the issues that future activities of the planet exploration program must confront, defines the basic concepts that provide the basis for establishing an Open System Architecture, identifies the appropriate features of such an architecture, and discusses examples of Open System Architectures.

System theory as applied differential geometry. [linear system

Science.gov (United States)

Hermann, R.

1979-01-01

The invariants of input-output systems under the action of the feedback group was examined. The approach used the theory of Lie groups and concepts of modern differential geometry, and illustrated how the latter provides a basis for the discussion of the analytic structure of systems. Finite dimensional linear systems in a single independent variable are considered. Lessons of more general situations (e.g., distributed parameter and multidimensional systems) which are increasingly encountered as technology advances are presented.

Data monitoring system of technical diagnosis system for EAST

International Nuclear Information System (INIS)

Qian Jing; Weng Peide; Chen Zhuomin; Wu Yu; Xi Weibin; Luo Jiarong

2010-01-01

Technical diagnosis system (TDS) is an important subsystem to monitor status parameters of EAST (experimental advanced superconducting tokamak). The upgraded TDS data monitoring system is comprised of management floor, monitoring floor and field floor.. Security protection, malfunction record and analysis are designed to make the system stable, robust and friendly. During the past EAST campaigns, the data monitoring system has been operated reliably and stably. The signal conditioning system and software architecture are described. (authors)

Systems engineering: A formal approach. Part 1: System concepts

Science.gov (United States)

Vanhee, K. M.

1993-03-01

Engineering is the scientific discipline focused on the creation of new artifacts that are supposed to be of some use to our society. Different types of artifacts require different engineering approaches. However, in all these disciplines the development of a new artifact is divided into stages. Three stages can always be recognized: Analysis, Design, and Realization. The book considers only the first two stages of the development process. It focuses on a specific type of artifacts, called discrete dynamic systems. These systems consist of active components of actors that consume and produce passive components or tokens. Three subtypes are studied in more detail: business systems (like a factory or restaurant), information systems (whether automated or not), and automated systems (systems that are controlled by an automated information system). The first subtype is studied by industrial engineers, the last by software engineers and electrical engineers, whereas the second is a battlefield for all three disciplines. The union of these disciplines is called systems engineering.

Systems integration processes for space nuclear electric propulsion systems

International Nuclear Information System (INIS)

Olsen, C.S.; Rice, J.W.; Stanley, M.L.

1991-01-01

The various components and subsystems that comprise a nuclear electric propulsion system should be developed and integrated so that each functions ideally and so that each is properly integrated with the other components and subsystems in the optimum way. This paper discusses how processes similar to those used in the development and intergration of the subsystems that comprise the Multimegawatt Space Nuclear Power System concepts can be and are being efficiently and effectively utilized for these purposes. The processes discussed include the development of functional and operational requirements at the system and subsystem level; the assessment of individual nuclear power supply and thruster concepts and their associated technologies; the conduct of systems integration efforts including the evaluation of the mission benefits for each system; the identification and resolution of concepts development, technology development, and systems integration feasibility issues; subsystem, system, and technology development and integration; and ground and flight subsystem and integrated system testing

Airborne Collision Avoidance System as a Cyber-Physical System

Directory of Open Access Journals (Sweden)

Andrei C. NAE

2015-12-01

Full Text Available In this paper the key concepts of ITS - Intelligent Transport Systems, CPS - Cyber-Physical Systems and SM - Smart Mobility are defined and correlated with the need for ACAS – Airborne Collision Avoidance System, as the last resort safety net and indispensable ingredient in civil aviation. Smart Mobility is addressed from a Cyber Physical-Systems perspective, detailing some of the elements that this entails. Here we consider the Air Transportations System of the future as a Cyber-Physical System and analyze the implications of doing so from different perspectives. The objective is to introduce a 4D collision avoidance shield technology which forms a last resort safety net technology for the next generation air transport (2050 and beyond. The new system will represent a step change over the performance of current technology. As conclusions, the benefits of implementing Transport Cyber-Physical Systems are discussed, as well as what this would require for future deployment.

Photovoltaic systems engineering

CERN Document Server

Messenger, Roger A

2010-01-01

BackgroundPopulation and Energy DemandEnergy UnitsCurrent World Energy Use PatternsExponential GrowthHubbert's Gaussian ModelNet Energy, Btu Economics, and the Test for SustainabilityDirect Conversion of Sunlight to Electricity with PhotovoltaicsThe SunThe Solar SpectrumThe Effect of Atmosphere on SunlightSunlight SpecificsCapturing SunlightIntroduction to PV SystemsThe PV CellThe PV ModuleThe PV ArrayEnergy StoragePV System LoadsPV System AvailabilityAssociated System Electronic ComponentsGeneratorsBalance of System (BOS) ComponentsGrid-Connected Utility-Interactive PV SystemsApplicable Codes and StandardsDesign Considerations for Straight Grid-Connected PV SystemsDesign of a System Based on Desired Annual System PerformanceDesign of a System Based on Available Roof SpaceDesign of a Microinverter-Based SystemDesign of a Nominal 21 kW System that Feeds a Three-Phase Distribution PanelDesign of a Nominal 250 kW SystemSystem Performance MonitoringMechanical ConsiderationsImportant Properties of MaterialsEstabli...

Ternary systems

International Nuclear Information System (INIS)

Kagan, D.N.; Hubberstey, P.; Barker, M.G.

1985-01-01

The paper reviews the experimental and theoretical studies carried out on multicomponent alkali metal systems. Solid-liquid phase equilibria studies are mainly concerned with the systems Na-K-Rb and Na-K-Cs, and data on the liquidus temperatures in these systems are presented. The thermodynamic properties of the ternary Na-K-Cs eutectic system have been determined experimentally, and the enthalpy, heat capacity and excess functions of the alloy are given. An analysis of calculational methods used in determining thermodynamic functions of ternary liquid metals systems is described. Finally, data are tabulated for the density, compressibility, saturated vapour pressure, viscosity and thermal conductivity of the ternary Na-K-Cs eutectic system. (UK)

System Frequency as Information Carrier in AC Power Systems

DEFF Research Database (Denmark)

Douglass, Philip James; Heussen, Kai; You, Shi

2015-01-01

Power generators contain control systems able to regulate system frequency, but the frequency setpoint values are only rarely modified from nominal values. This paper describes design considerations for a communication system from generators to frequency sensitive distributed energy resourc es (FS......-DER) using changes to frequency setpoint values of genera- tors. Signaling discrete system states by generating off-nominal system frequency values can be used as a novel narrowband unidirectional broadcast communications channel. This paper describes two protocols for utilizing off-nominal frequencies...... to carry information: First, a protocol for dispatching blocks of FS- DER that is suitable for systems restricted to relatively slow rates of change of frequency (ROCOF). Second, for systems that allow higher ROCOF values, the feasibility of using power generation resources as a power line communication...

Operating systems

CERN Document Server

Tsichritzis, Dionysios C; Rheinboldt, Werner

1974-01-01

Operating Systems deals with the fundamental concepts and principles that govern the behavior of operating systems. Many issues regarding the structure of operating systems, including the problems of managing processes, processors, and memory, are examined. Various aspects of operating systems are also discussed, from input-output and files to security, protection, reliability, design methods, performance evaluation, and implementation methods.Comprised of 10 chapters, this volume begins with an overview of what constitutes an operating system, followed by a discussion on the definition and pr

Systems design methodology to develop chrysanthemum growing systems

NARCIS (Netherlands)

Blok, C.; Vermeulen, T.

2012-01-01

When chrysanthemum growers change soil for a soilless growing system they aim for labour cost reduction, quality and yield improvement and reduced emissions of nutrients. Because many attempts to come up with a viable soilless system failed, improvements and systemizations of the design process were

Supermarket Refrigeration System - Benchmark for Hybrid System Control

DEFF Research Database (Denmark)

Sloth, Lars Finn; Izadi-Zamanabadi, Roozbeh; Wisniewski, Rafal

2007-01-01

This paper presents a supermarket refrigeration system as a benchmark for development of new ideas and a comparison of methods for hybrid systems' modeling and control. The benchmark features switch dynamics and discrete valued input making it a hybrid system, furthermore the outputs are subjected...

On Mario Bunge's Definition of System and System Boundary

Science.gov (United States)

Cavallo, Andrew M.

2012-01-01

In this short paper we discuss Mario Bunge's definition of system boundary. It is quickly discovered that Bunge's definition of system and system boundary are both deficient. We thus propose new definitions, which (hopefully) improve the situation. Our definition of system boundary works off the same intuition behind Bunge's.

ERP–systems

OpenAIRE

Shustova I.

2016-01-01

In this work, we analyzed the existing ERP–systems of foreign and domestic manufacturers. Popular ERP–systems in the Republic of Belarus were considered. The leading ERP-systems in the domestic market and their features were described in detail. Finally, we described the steps that must be taken to select the most suitable ERP-system for a particular company.

Infinite Particle Systems: Complex Systems III

Directory of Open Access Journals (Sweden)

Editorial Board

2008-06-01

Full Text Available In the years 2002-2005, a group of German and Polish mathematicians worked under a DFG research project No 436 POL 113/98/0-1 entitled "Methods of stochastic analysis in the theory of collective phenomena: Gibbs states and statistical hydrodynamics". The results of their study were summarized at the German-Polish conference, which took place in Poland in October 2005. The venue of the conference was Kazimierz Dolny upon Vistula - a lovely town and a popular place for various cultural, scientific, and even political events of an international significance. The conference was also attended by scientists from France, Italy, Portugal, UK, Ukraine, and USA, which predetermined its international character. Since that time, the conference, entitled "Infinite Particle Systems: Complex Systems" has become an annual international event, attended by leading scientists from Germany, Poland and many other countries. The present volume of the "Condensed Matter Physics" contains proceedings of the conference "Infinite Particle Systems: Complex Systems III", which took place in June 2007.

L-system fractals

CERN Document Server

Mishra, Jibitesh

2007-01-01

The book covers all the fundamental aspects of generating fractals through L-system. Also it provides insight to various researches in this area for generating fractals through L-system approach & estimating dimensions. Also it discusses various applications of L-system fractals. Key Features: - Fractals generated from L-System including hybrid fractals - Dimension calculation for L-system fractals - Images & codes for L-system fractals - Research directions in the area of L-system fractals - Usage of various freely downloadable tools in this area - Fractals generated from L-System including hybrid fractals- Dimension calculation for L-system fractals- Images & codes for L-system fractals- Research directions in the area of L-system fractals- Usage of various freely downloadable tools in this area

Operating System for Runtime Reconfigurable Multiprocessor Systems

Directory of Open Access Journals (Sweden)

Diana Göhringer

2011-01-01

Full Text Available Operating systems traditionally handle the task scheduling of one or more application instances on processor-like hardware architectures. RAMPSoC, a novel runtime adaptive multiprocessor System-on-Chip, exploits the dynamic reconfiguration on FPGAs to generate, start and terminate hardware and software tasks. The hardware tasks have to be transferred to the reconfigurable hardware via a configuration access port. The software tasks can be loaded into the local memory of the respective IP core either via the configuration access port or via the on-chip communication infrastructure (e.g. a Network-on-Chip. Recent-series of Xilinx FPGAs, such as Virtex-5, provide two Internal Configuration Access Ports, which cannot be accessed simultaneously. To prevent conflicts, the access to these ports as well as the hardware resource management needs to be controlled, e.g. by a special-purpose operating system running on an embedded processor. For that purpose and to handle the relations between temporally and spatially scheduled operations, the novel approach of an operating system is of high importance. This special purpose operating system, called CAP-OS (Configuration Access Port-Operating System, which will be presented in this paper, supports the clients using the configuration port with the services of priority-based access scheduling, hardware task mapping and resource management.

Business system: Sustainable development and anticipatory system

Directory of Open Access Journals (Sweden)

Vojko Potočan

2002-01-01

Full Text Available The existence and development of humankind depends mainly upon the co-ordinated operation of all areas and levels of human activity. However, in theory and in practice there is no model of operation, which would provide a harmonized and target oriented development. A partial solution is offered by sustainable development, which tries to define and carry out common goals of mankind with a harmonized implementation of human activities at all levels of its living and behaviour. Companies belong to central institutions of modern society which essentially co–create the sustainability of society. The company’s endeavour by simulation to prepare models of their goals concerning their internal and external environment. On the base of systemic treatment, we can define companies as business system, which can survive in a log-run only on the basis of sustainable development. The business system can also be supported by the application of the anticipatory systems. The anticipatory systems can be, in this sense, understood as an entity of the methodological approach, techniques and modes of work. Their characteristics have, a direct impact on the determination of goals, on the orientation of operation, and hence on the achievement of the business system results.

Photons-based medical imaging - Radiology, X-ray tomography, gamma and positrons tomography, optical imaging; Imagerie medicale a base de photons - Radiologie, tomographie X, tomographie gamma et positons, imagerie optique

Energy Technology Data Exchange (ETDEWEB)

Fanet, H.; Dinten, J.M.; Moy, J.P.; Rinkel, J. [CEA Leti, Grenoble (France); Buvat, I. [IMNC - CNRS, Orsay (France); Da Silva, A. [Institut Fresnel, Marseille (France); Douek, P.; Peyrin, F. [INSA Lyon, Lyon Univ. (France); Frija, G. [Hopital Europeen George Pompidou, Paris (France); Trebossen, R. [CEA-Service hospitalier Frederic Joliot, Orsay (France)

2010-07-01

This book describes the different principles used in medical imaging. The detection aspects, the processing electronics and algorithms are detailed for the different techniques. This first tome analyses the photons-based techniques (X-rays, gamma rays and visible light). Content: 1 - physical background: radiation-matter interaction, consequences on detection and medical imaging; 2 - detectors for medical imaging; 3 - processing of numerical radiography images for quantization; 4 - X-ray tomography; 5 - positrons emission tomography: principles and applications; 6 - mono-photonic imaging; 7 - optical imaging; Index. (J.S.)

Ecological and general systems an introduction to systems ecology

CERN Document Server

Odum, Howard T.

1994-01-01

Using an energy systems language that combines energetics, kinetics, information, cybernetics, and simulation, Ecological and General Systems compares models of many fields of science, helping to derive general systems principles. First published as Systems Ecology in 1983, Ecological and General Systems proposes principles of self-organization and the designs that prevail by maximizing power and efficiency. Comparisons to fifty other systems languages are provided. Innovative presentations are given on earth homeostasis (Gaia); the inadequacy of presenting equations without network relationships and energy constraints; the alternative interpretation of high entropy complexity as adaptive structure; basic equations of ecological economics; and the energy basis of scientific hierarchy.

Composite Socio-Technical Systems: A Method for Social Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); He, Fulin [Huazhong University of Science & Technology; Hao, Jun [University of Denver; Dai, Xiaoxiao [University of Denver; Zhang, Jun Jason [University of Denver; Wei, Jiaolong [Huazhong University of Science & Technology

2017-12-01

In order to model and study the interactions between social on technical systems, a systemic method, namely the composite socio-technical systems (CSTS), is proposed to incorporate social systems, technical systems and the interaction mechanism between them. A case study on University of Denver (DU) campus grid is presented in paper to demonstrate the application of the proposed method. In the case study, the social system, technical system, and the interaction mechanism are defined and modelled within the framework of CSTS. Distributed and centralized control and management schemes are investigated, respectively, and numerical results verifies the feasibility and performance of the proposed composite system method.

Operating System Security

CERN Document Server

Jaeger, Trent

2008-01-01

Operating systems provide the fundamental mechanisms for securing computer processing. Since the 1960s, operating systems designers have explored how to build "secure" operating systems - operating systems whose mechanisms protect the system against a motivated adversary. Recently, the importance of ensuring such security has become a mainstream issue for all operating systems. In this book, we examine past research that outlines the requirements for a secure operating system and research that implements example systems that aim for such requirements. For system designs that aimed to

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov (United States)

the Energy Systems Integration Facility as part of NREL's work with SolarCity and the Hawaiian Electric Companies. Photo by Amy Glickson, NREL Welcome to Energy Systems Integration News, NREL's monthly date on the latest energy systems integration (ESI) developments at NREL and worldwide. Have an item

System Architecture Design for Electric Vehicle (EV) Systems

DEFF Research Database (Denmark)

Xu, Zhao; Wu, Qiuwei; Nielsen, Arne Hejde

2010-01-01

The electric vehicle (EV) system should fulfill the energy needs of EVs to meet the EV users’ driving requirements and enable the system service from EVs to support the power system operation with high penetration of renewable energy resources (RES) by providing necessary infrastructures. In orde...

Analyzing Systemic Risk in the Chinese Banking System

NARCIS (Netherlands)

Huang, Qiubin; de Haan, Jakob; Scholtens, Bert

We examine systemic risk in the Chinese banking system by estimating the conditional value at risk (CoVaR), the marginal expected shortfall (MES), the systemic impact index (SII) and the vulnerability index (VI) for 16 listed banks in China. Although these measures show different patterns, our

Systems analysis of a security alarm system

International Nuclear Information System (INIS)

Schiff, A.

1975-01-01

When the Lawrence Livermore Laboratory found that its security alarm system was causing more false alarms and maintenance costs than LLL felt was tolerable, a systems analysis was undertaken to determine what should be done about the situation. This report contains an analysis of security alarm systems in general and ends with a review of the existing Security Alarm Control Console (SACC) and recommendations for its improvement, growth and change. (U.S.)

System Identification, Environmental Modelling, and Control System Design

CERN Document Server

Garnier, Hugues

2012-01-01

System Identification, Environmetric Modelling, and Control Systems Design is dedicated to Professor Peter Young on the occasion of his seventieth birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume is comprised of a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as ...

Human performance modeling for system of systems analytics.

Energy Technology Data Exchange (ETDEWEB)

Dixon, Kevin R.; Lawton, Craig R.; Basilico, Justin Derrick; Longsine, Dennis E. (INTERA, Inc., Austin, TX); Forsythe, James Chris; Gauthier, John Henry; Le, Hai D.

2008-10-01

A Laboratory-Directed Research and Development project was initiated in 2005 to investigate Human Performance Modeling in a System of Systems analytic environment. SAND2006-6569 and SAND2006-7911 document interim results from this effort; this report documents the final results. The problem is difficult because of the number of humans involved in a System of Systems environment and the generally poorly defined nature of the tasks that each human must perform. A two-pronged strategy was followed: one prong was to develop human models using a probability-based method similar to that first developed for relatively well-understood probability based performance modeling; another prong was to investigate more state-of-art human cognition models. The probability-based modeling resulted in a comprehensive addition of human-modeling capability to the existing SoSAT computer program. The cognitive modeling resulted in an increased understanding of what is necessary to incorporate cognition-based models to a System of Systems analytic environment.

Millimeter-scale MEMS enabled autonomous systems: system feasibility and mobility

Science.gov (United States)

Pulskamp, Jeffrey S.

2012-06-01

Millimeter-scale robotic systems based on highly integrated microelectronics and micro-electromechanical systems (MEMS) could offer unique benefits and attributes for small-scale autonomous systems. This extreme scale for robotics will naturally constrain the realizable system capabilities significantly. This paper assesses the feasibility of developing such systems by defining the fundamental design trade spaces between component design variables and system level performance parameters. This permits the development of mobility enabling component technologies within a system relevant context. Feasible ranges of system mass, required aerodynamic power, available battery power, load supported power, flight endurance, and required leg load bearing capability are presented for millimeter-scale platforms. The analysis illustrates the feasibility of developing both flight capable and ground mobile millimeter-scale autonomous systems while highlighting the significant challenges that must be overcome to realize their potential.

NASA's Earth Observing System Data and Information System - EOSDIS

Science.gov (United States)

Ramapriyan, Hampapuram K.

2011-01-01

This slide presentation reviews the work of NASA's Earth Observing System Data and Information System (EOSDIS), a petabyte-scale archive of environmental data that supports global climate change research. The Earth Science Data Systems provide end-to-end capabilities to deliver data and information products to users in support of understanding the Earth system. The presentation contains photographs from space of recent events, (i.e., the effects of the tsunami in Japan, and the wildfires in Australia.) It also includes details of the Data Centers that provide the data to EOSDIS and Science Investigator-led Processing Systems. Information about the Land, Atmosphere Near-real-time Capability for EOS (LANCE) and some of the uses that the system has made possible are reviewed. Also included is information about how to access the data, and evolutionary plans for the future of the system.

Optimum Design Of On Grid Pv System Using Tracking System

Directory of Open Access Journals (Sweden)

Saeed Mansour

2015-05-01

Full Text Available Abstract The fossil fuel is a main issue in the world due to the increase of fossil fuel cost and the depletion of the fossil fuel with continuous increasing demand on electricity. With continuous decrease of PV panels cost it is interesting to consider generation of electricity from PV system. To provide electric energy to a load in a remote area where electric grid utility is not available or connection with grid utility is available there are two approaches of photovoltaic system PV without tracking system Fixed System and PV with tracking systems. The result shows that the energy production by using PV with tracking system generates more energy in comparison with fixed panels system. However the cost per produced KWH is less in case of using fixed panels. This is the backbone in choice between two approaches of photovoltaic system. In this work a system design and cost analysis for two approaches of photovoltaic system are considered.

Preliminary System Design of the SWRL Financial System.

Science.gov (United States)

Ikeda, Masumi

The preliminary system design of the computer-based Southwest Regional Laboratory's (SWRL) Financial System is outlined. The system is designed to produce various management and accounting reports needed to maintain control of SWRL operational and financial activities. Included in the document are descriptions of the various types of system…

System-Awareness for Agent-based Power System Control

DEFF Research Database (Denmark)

Heussen, Kai; Saleem, Arshad; Lind, Morten

2010-01-01

transition. This paper presents a concept for the representation and organization of control- and resource-allocation, enabling computational reasoning and system awareness. The principles are discussed with respect to a recently proposed Subgrid operation concept.......Operational intelligence in electric power systems is focused in a small number of control rooms that coordinate their actions. A clear division of responsibility and a command hierarchy organize system operation. With multi-agent based control systems, this control paradigm may be shifted...... to a more decentralized openaccess collaboration control paradigm. This shift cannot happen at once, but must fit also with current operation principles. In order to establish a scalable and transparent system control architecture, organizing principles have to be identified that allow for a smooth...

Is the system really the solution? Operating costs in hospital systems.

Science.gov (United States)

Burns, Lawton Robert; McCullough, Jeffrey S; Wholey, Douglas R; Kruse, Gregory; Kralovec, Peter; Muller, Ralph

2015-06-01

Hospital system formation has recently accelerated. Executives emphasize scale economies that lower operating costs, a claim unsupported in academic research. Do systems achieve lower costs than freestanding facilities, and, if so, which system types? We test hypotheses about the relationship of cost with membership in systems, larger systems, and centralized and local hub-and-spoke systems. We also test whether these relationships have changed over time. Examining 4,000 U.S. hospitals during 1998 to 2010, we find no evidence that system members exhibit lower costs. However, members of smaller systems are lower cost than larger systems, and hospitals in centralized systems are lower cost than everyone else. There is no evidence that the system's spatial configuration is associated with cost, although national system hospitals exhibit higher costs. Finally, these results hold over time. We conclude that while systems in general may not be the solution to lower costs, some types of systems are. © The Author(s) 2015.

Real-time reactor coolant system pressure/temperature limit system

International Nuclear Information System (INIS)

Newton, D.G.; Schemmel, R.R.; Van Scooter, W.E. Jr.

1991-01-01

This patent describes an system, used in controlling the operating of a nuclear reactor coolant system, which automatically calculates and displays allowable reactor coolant system pressure/temperature limits within the nuclear reactor coolant system based upon real-time inputs. It comprises: means for producing signals representative of real-time operating parameters of the nuclear reactor cooling system; means for developing pressure and temperature limits relating the real-time operating parameters of the nuclear reactor coolant system, for normal and emergency operation thereof; means for processing the signals representative of real-time operating parameters of the nuclear reactor coolant system to perform calculations of a best estimate of signals, check manual inputs against permissible valves and test data acquisition hardware for validity and over/under range; and means for comparing the representative signals with limits for the real-time operating parameters to produce a signal for a real-time display of the pressure and temperature limits and of the real-time operating parameters use an operator in controlling the operation of the nuclear reactor coolant system

SAMS--a systems architecture for developing intelligent health information systems.

Science.gov (United States)

Yılmaz, Özgün; Erdur, Rıza Cenk; Türksever, Mustafa

2013-12-01

In this paper, SAMS, a novel health information system architecture for developing intelligent health information systems is proposed and also some strategies for developing such systems are discussed. The systems fulfilling this architecture will be able to store electronic health records of the patients using OWL ontologies, share patient records among different hospitals and provide physicians expertise to assist them in making decisions. The system is intelligent because it is rule-based, makes use of rule-based reasoning and has the ability to learn and evolve itself. The learning capability is provided by extracting rules from previously given decisions by the physicians and then adding the extracted rules to the system. The proposed system is novel and original in all of these aspects. As a case study, a system is implemented conforming to SAMS architecture for use by dentists in the dental domain. The use of the developed system is described with a scenario. For evaluation, the developed dental information system will be used and tried by a group of dentists. The development of this system proves the applicability of SAMS architecture. By getting decision support from a system derived from this architecture, the cognitive gap between experienced and inexperienced physicians can be compensated. Thus, patient satisfaction can be achieved, inexperienced physicians are supported in decision making and the personnel can improve their knowledge. A physician can diagnose a case, which he/she has never diagnosed before, using this system. With the help of this system, it will be possible to store general domain knowledge in this system and the personnel's need to medical guideline documents will be reduced.

System for Collecting Biosignal Data from Multiple Patient Monitoring Systems.

Science.gov (United States)

Yoon, Dukyong; Lee, Sukhoon; Kim, Tae Young; Ko, JeongGil; Chung, Wou Young; Park, Rae Woong

2017-10-01

Biosignal data include important physiological information. For that reason, many devices and systems have been developed, but there has not been enough consideration of how to collect and integrate raw data from multiple systems. To overcome this limitation, we have developed a system for collecting and integrating biosignal data from two patient monitoring systems. We developed an interface to extract biosignal data from Nihon Kohden and Philips monitoring systems. The Nihon Kohden system has a central server for the temporary storage of raw waveform data, which can be requested using the HL7 protocol. However, the Philips system used in our hospital cannot save raw waveform data. Therefore, our system was connected to monitoring devices using the RS232 protocol. After collection, the data were transformed and stored in a unified format. From September 2016 to August 2017, we collected approximately 117 patient-years of waveform data from 1,268 patients in 79 beds of five intensive care units. Because the two systems use the same data storage format, the application software could be run without compatibility issues. Our system collects biosignal data from different systems in a unified format. The data collected by the system can be used to develop algorithms or applications without the need to consider the source of the data.

Standard diffusive systems are well-posed linear systems

NARCIS (Netherlands)

Matignon, Denis; Zwart, Heiko J.

2004-01-01

The class of well-posed linear systems as introduced by Salamon has become a well-understood class of systems, see e.g. the work of Weiss and the book of Staffans. Many partial partial differential equations with boundary control and point observation can be formulated as a well-posed linear system.

A Ground Systems Template for Remote Sensing Systems

Science.gov (United States)

McClanahan, Timothy P.; Trombka, Jacob I.; Floyd, Samuel R.; Truskowski, Walter; Starr, Richard D.; Clark, Pamela E.; Evans, Larry G.

2002-10-01

Spaceborne remote sensing using gamma and X-ray spectrometers requires particular attention to the design and development of reliable systems. These systems must ensure the scientific requirements of the mission within the challenging technical constraints of operating instrumentation in space. The Near Earth Asteroid Rendezvous (NEAR) spacecraft included X-ray and gamma-ray spectrometers (XGRS), whose mission was to map the elemental chemistry of the 433 Eros asteroid. A remote sensing system template, similar to a blackboard systems approach used in artificial intelligence, was identified in which the spacecraft, instrument, and ground system was designed and developed to monitor and adapt to evolving mission requirements in a complicated operational setting. Systems were developed for ground tracking of instrument calibration, instrument health, data quality, orbital geometry, solar flux as well as models of the asteroid's surface characteristics, requiring an intensive human effort. In the future, missions such as the Autonomous Nano-Technology Swarm (ANTS) program will have to rely heavily on automation to collectively encounter and sample asteroids in the outer asteroid belt. Using similar instrumentation, ANTS will require information similar to data collected by the NEAR X-ray/Gamma-Ray Spectrometer (XGRS) ground system for science and operations management. The NEAR XGRS systems will be studied to identify the equivalent subsystems that may be automated for ANTS. The effort will also investigate the possibility of applying blackboard style approaches to automated decision making required for ANTS.

A ground systems template for remote sensing systems

International Nuclear Information System (INIS)

McClanahan, Timothy P.; Trombka, Jacob I.; Floyd, Samuel R.; Truskowski, Walter; Starr, Richard D.; Clark, Pamela E.; Evans, Larry G.

2002-01-01

Spaceborne remote sensing using gamma and X-ray spectrometers requires particular attention to the design and development of reliable systems. These systems must ensure the scientific requirements of the mission within the challenging technical constraints of operating instrumentation in space. The Near Earth Asteroid Rendezvous (NEAR) spacecraft included X-ray and gamma-ray spectrometers (XGRS), whose mission was to map the elemental chemistry of the 433 Eros asteroid. A remote sensing system template, similar to a blackboard systems approach used in artificial intelligence, was identified in which the spacecraft, instrument, and ground system was designed and developed to monitor and adapt to evolving mission requirements in a complicated operational setting. Systems were developed for ground tracking of instrument calibration, instrument health, data quality, orbital geometry, solar flux as well as models of the asteroid's surface characteristics, requiring an intensive human effort. In the future, missions such as the Autonomous Nano-Technology Swarm (ANTS) program will have to rely heavily on automation to collectively encounter and sample asteroids in the outer asteroid belt. Using similar instrumentation, ANTS will require information similar to data collected by the NEAR X-ray/Gamma-Ray Spectrometer (XGRS) ground system for science and operations management. The NEAR XGRS systems will be studied to identify the equivalent subsystems that may be automated for ANTS. The effort will also investigate the possibility of applying blackboard style approaches to automated decision making required for ANTS

Working with Systems and Thinking Systemically--Disentangling the Crossed Wires

Science.gov (United States)

Fox, Mark

2009-01-01

This article explores two separate traditions that educational psychologists (EPs) in the UK have for working with systems. One of these is "systems work" with organisations such as schools. The other is "systemic thinking" for working with families. Over the years these two traditions, systems work and systemic thinking, have…

Execution Of Systems Integration Principles During Systems Engineering Design

Science.gov (United States)

2016-09-01

application utilized a paper-based approach to systems design. The customer directed utilization of an SE Waterfall process model . These new...regarding requirements, stakeholders, testing, and system boundaries. Additionally, this thesis discusses use of systems architecture frameworks and models ...and the consistent use of model - based systems engineering throughout development. Lastly, it proposes formal methods language for improving models

System solution to improve energy efficiency of HVAC systems

Science.gov (United States)

Chretien, L.; Becerra, R.; Salts, N. P.; Groll, E. A.

2017-08-01

According to recent surveys, heating and air conditioning systems account for over 45% of the total energy usage in US households. Three main types of HVAC systems are available to homeowners: (1) fixed-speed systems, where the compressor cycles on and off to match the cooling load; (2) multi-speed (typically, two-speed) systems, where the compressor can operate at multiple cooling capacities, leading to reduced cycling; and (3) variable-speed systems, where the compressor speed is adjusted to match the cooling load of the household, thereby providing higher efficiency and comfort levels through better temperature and humidity control. While energy consumption could reduce significantly by adopting variable-speed compressor systems, the market penetration has been limited to less than 10% of the total HVAC units and a vast majority of systems installed in new construction remains single speed. A few reasons may explain this phenomenon such as the complexity of the electronic circuitry required to vary compressor speed as well as the associated system cost. This paper outlines a system solution to boost the Seasonal Energy Efficiency Rating (SEER) of a traditional single-speed unit through using a low power electronic converter that allows the compressor to operate at multiple low capacity settings and is disabled at high compressor speeds.

Expert systems

International Nuclear Information System (INIS)

Haldy, P.A.

1988-01-01

The definitions of the terms 'artificial intelligence' and 'expert systems', the methodology, areas of employment and limits of expert systems are discussed. The operation of an expert system is described, especially the presentation and organization of knowledge as well as interference and control. Methods and tools for expert system development are presented and their application in nuclear energy are briefly addressed. 7 figs., 2 tabs., 6 refs

Expert System

DEFF Research Database (Denmark)

Hildebrandt, Thomas Troels; Cattani, Gian Luca

2016-01-01

An expert system is a computer system for inferring knowledge from a knowledge base, typically by using a set of inference rules. When the concept of expert systems was introduced at Stanford University in the early 1970s, the knowledge base was an unstructured set of facts. Today the knowledge b...... for the application of expert systems, but also raises issues regarding privacy and legal liability....

Multifunction system

International Nuclear Information System (INIS)

Wauthier, J.; Fiori, R.

1990-01-01

The development, the characteristics and the applications of a multifunction system are presented. The system is used on the RBES laboratory pipes, at Marcoule. The system was developed in order to allow, without time loss, the modification of the circuit function by replacing only one component. The following elements form the multifunction system: a fixed base, which is part of the tube, a removable piece, which is inserted into the base, a cover plate and its locking system. The material, chosen among commercial trade marks, required small modifications in order to be used in the circuit [fr

AutoBayes Program Synthesis System System Internals

Science.gov (United States)

Schumann, Johann Martin

2011-01-01

This lecture combines the theoretical background of schema based program synthesis with the hands-on study of a powerful, open-source program synthesis system (Auto-Bayes). Schema-based program synthesis is a popular approach toward program synthesis. The lecture will provide an introduction into this topic and discuss how this technology can be used to generate customized algorithms. The synthesis of advanced numerical algorithms requires the availability of a powerful symbolic (algebra) system. Its task is to symbolically solve equations, simplify expressions, or to symbolically calculate derivatives (among others) such that the synthesized algorithms become as efficient as possible. We will discuss the use and importance of the symbolic system for synthesis. Any synthesis system is a large and complex piece of code. In this lecture, we will study Autobayes in detail. AutoBayes has been developed at NASA Ames and has been made open source. It takes a compact statistical specification and generates a customized data analysis algorithm (in C/C++) from it. AutoBayes is written in SWI Prolog and many concepts from rewriting, logic, functional, and symbolic programming. We will discuss the system architecture, the schema libary and the extensive support infra-structure. Practical hands-on experiments and exercises will enable the student to get insight into a realistic program synthesis system and provides knowledge to use, modify, and extend Autobayes.

Expert system for nuclear power plant feedwater system diagnosis

International Nuclear Information System (INIS)

Meguro, R.; Kinoshita, Y.; Sato, T.; Yokota, Y.; Yokota, M.

1987-01-01

The Expert System for Nuclear Power Plant Feedwater System Diagnosis has been developed to assist maintenance engineers in nuclear power plants. This system adopts the latest process computer TOSBAC G8050 and the expert system developing tool TDES2, and has a large scale knowledge base which consists of the expert knowledge and experience of engineers in many fields. The man-machine system, which has been developed exclusively for diagnosis, improves the man-machine interface and realizes the graphic displays of diagnostic process and path, stores diagnostic results and searches past reference

Modernization of control system using the digital control system

International Nuclear Information System (INIS)

Carrasco, J. A.; Fernandez, L.; Jimenez, A.

2002-01-01

Nowadays, all plant automation tendencies are based on the use of Digital Control System. In big industrial plants the control systems employed are Distributed Control Systems (DCS). The addition of these systems in nuclear power plants,implies an important adaptation process, because most of them were installed using analog control systems. This paper presents the objectives and the first results obtained, in a modernization project, focused in obtaining an engineering platform for making test and analysis of changes prior to their implementation in a nuclear plant. Modernization, Upgrade, DCS, Automation, Simulation, Training. (Author)

Consultation system for image diagnosis: Report formation support system

International Nuclear Information System (INIS)

Ikeda, M.; Sakuma, S.; Ishigaki, T.; Suzuki, K.; Oikawa, K.

1987-01-01

The authors developed a consultation system for image diagnosis, involving artificial intelligence ideas. In this system, the authors proposed a new report formation support system and implemented it in lymphangiography. This support system starts with the input of image interpretation. The input process is made mainly by selecting items. This system encodes the input findings into the semantic network, which is represented as a directed graph, and it reserves them into the knowledge database in the above structure. Finally, the output (report) is made in the near natural language, which corresponds to the input findings

Software control and system configuration management: A systems-wide approach

Science.gov (United States)

Petersen, K. L.; Flores, C., Jr.

1984-01-01

A comprehensive software control and system configuration management process for flight-crucial digital control systems of advanced aircraft has been developed and refined to insure efficient flight system development and safe flight operations. Because of the highly complex interactions among the hardware, software, and system elements of state-of-the-art digital flight control system designs, a systems-wide approach to configuration control and management has been used. Specific procedures are implemented to govern discrepancy reporting and reconciliation, software and hardware change control, systems verification and validation testing, and formal documentation requirements. An active and knowledgeable configuration control board reviews and approves all flight system configuration modifications and revalidation tests. This flexible process has proved effective during the development and flight testing of several research aircraft and remotely piloted research vehicles with digital flight control systems that ranged from relatively simple to highly complex, integrated mechanizations.

Dual-systems and the development of reasoning: competence-procedural systems.

Science.gov (United States)

Overton, Willis F; Ricco, Robert B

2011-03-01

Dual-system, dual-process, accounts of adult cognitive processing are examined in the context of a self-organizing relational developmental systems approaches to cognitive growth. Contemporary adult dual-process accounts describe a linear architecture of mind entailing two split-off, but interacting systems; a domain general, content-free 'analytic' system (system 2) and a domain specific highly contextualized 'heuristic' system (system 1). In the developmental literature on deductive reasoning, a similar distinction has been made between a domain general competence (reflective, algorithmic) system and a domain specific procedural system. In contrast to the linear accounts offered by empiricist, nativist, and/or evolutionary explanations, the dual competence-procedural developmental perspective argues that the mature systems emerge through developmental transformations as differentiations and intercoordinations of an early relatively undifferentiated action matrix. This development, whose microscopic mechanism is action-in-the-world, is characterized as being embodied, nonlinear, and epigenetic. WIREs Cogni Sci 2011 2 231-237 DOI: 10.1002/wcs.120 For further resources related to this article, please visit the WIREs website. © 2010 John Wiley & Sons, Ltd.

The Norwegian Electric Power System - System Description and Future Developments; Norsk kraftforsyning - dagens system og fremtidig utvikling

Energy Technology Data Exchange (ETDEWEB)

Hagen, Janne Merete; Nystuen, Kjell Olav; Fridheim, Haavard; Rutledal, Frode

2000-09-01

This report presents a description of the present Norwegian electric power system, as well as a discussion of emerging trends and future developments in this system. The report provides the basis for FFI's current vulnerability analysis of the electric power system. Norway's electric power system is getting increasingly complex, due to a large-scale implementation of electronic components and information systems. Workforce reductions and efficiency improvements dominate the development of the electric power sector. Norway is also becoming increasingly dependent on foreign power sources. These trends provide for an entirely different electric power system than just a few years ago. Also, these trends make it virtually impossible to present a ''static'' description of the system. Thus, the report also contains a scenario, describing possible future developments of the system until 2010. (author)

PWR auxiliary systems, safety and emergency systems, accident analysis, operation

International Nuclear Information System (INIS)

Meyer, P.J.

1976-01-01

The author presents a description of PWR auxiliary systems like volume control, boric acid control, coolant purification, -degassing, -storage and -treatment system and waste processing systems. Residual heat removal systems, emergency systems and containment designs are discussed. As an accident analysis the author gives a survey over malfunctions and disturbances in the field of reactor operations. (TK) [de

Prototype of smart office system using based security system

Science.gov (United States)

Prasetyo, T. F.; Zaliluddin, D.; Iqbal, M.

2018-05-01

Creating a new technology in the modern era gives a positive impact on business and industry. Internet of Things (IoT) as a new communication technology is very useful in realizing smart systems such as: smart home, smart office, smart parking and smart city. This study presents a prototype of the smart office system which was designed as a security system based on IoT. Smart office system development method used waterfall model. IoT-based smart office system used platform (project builder) cayenne so that. The data can be accessed and controlled through internet network from long distance. Smart office system used arduino mega 2560 microcontroller as a controller component. In this study, Smart office system is able to detect threats of dangerous objects made from metals, earthquakes, fires, intruders or theft and perform security monitoring outside the building by using raspberry pi cameras on autonomous robots in real time to the security guard.

Integrated Knowledge Based Expert System for Disease Diagnosis System

Science.gov (United States)

Arbaiy, Nureize; Sulaiman, Shafiza Eliza; Hassan, Norlida; Afizah Afip, Zehan

2017-08-01

The role and importance of healthcare systems to improve quality of life and social welfare in a society have been well recognized. Attention should be given to raise awareness and implementing appropriate measures to improve health care. Therefore, a computer based system is developed to serve as an alternative for people to self-diagnose their health status based on given symptoms. This strategy should be emphasized so that people can utilize the information correctly as a reference to enjoy healthier life. Hence, a Web-based Community Center for Healthcare Diagnosis system is developed based on expert system technique. Expert system reasoning technique is employed in the system to enable information about treatment and prevention of the diseases based on given symptoms. At present, three diseases are included which are arthritis, thalassemia and pneumococcal. Sets of rule and fact are managed in the knowledge based system. Web based technology is used as a platform to disseminate the information to users in order for them to optimize the information appropriately. This system will benefit people who wish to increase health awareness and seek expert knowledge on the diseases by performing self-diagnosis for early disease detection.

System for chemical decontamination of nuclear reactor primary systems

International Nuclear Information System (INIS)

Schlonski, J.S.; McGiure, M.F.; Corpora, G.J.

1992-01-01

This patent describes a method of chemically decontaminating a nuclear reactor primary system, having a residual heat removal system with one or more residual heat removal heat exchangers, each having an upstream and a downstream side, at or above ambient pressure. It comprises: injecting decontamination chemicals using an injection means; circulating the injected decontamination chemicals throughout the primary system; directing the circulated decontamination chemicals and process fluids to a means for removing suspended solids and dissolved materials after the circulated chemicals and process fluids have passed through the residual heat removal heat exchanger; decontaminating the process fluids; and feeding the decontaminated process fluids to the injection means. This patent also describes a chemical decontamination system for use at, or above, ambient pressure in a nuclear reactor primary system having a residual heat removal system. It comprises: means for injecting decontamination chemicals into the primary system; means for removing dissolved and suspended materials and decontamination chemicals from the primary system; one or more residual heat removal pumps; means located downstream of one of the residual heat removal heat exchangers; and a return line connecting the means

Systemic darwinism.

Science.gov (United States)

Winther, Rasmus Grønfeldt

2008-08-19

Darwin's 19th century evolutionary theory of descent with modification through natural selection opened up a multidimensional and integrative conceptual space for biology. We explore three dimensions of this space: explanatory pattern, levels of selection, and degree of difference among units of the same type. Each dimension is defined by a respective pair of poles: law and narrative explanation, organismic and hierarchical selection, and variational and essentialist thinking. As a consequence of conceptual debates in the 20th century biological sciences, the poles of each pair came to be seen as mutually exclusive opposites. A significant amount of 21st century research focuses on systems (e.g., genomic, cellular, organismic, and ecological/global). Systemic Darwinism is emerging in this context. It follows a "compositional paradigm" according to which complex systems and their hierarchical networks of parts are the focus of biological investigation. Through the investigation of systems, Systemic Darwinism promises to reintegrate each dimension of Darwin's original logical space. Moreover, this ideally and potentially unified theory of biological ontology coordinates and integrates a plurality of mathematical biological theories (e.g., self-organization/structure, cladistics/history, and evolutionary genetics/function). Integrative Systemic Darwinism requires communal articulation from a plurality of perspectives. Although it is more general than these, it draws on previous advances in Systems Theory, Systems Biology, and Hierarchy Theory. Systemic Darwinism would greatly further bioengineering research and would provide a significantly deeper and more critical understanding of biological reality.

System identification of the Arabidopsis plant circadian system

Science.gov (United States)

Foo, Mathias; Somers, David E.; Kim, Pan-Jun

2015-02-01

The circadian system generates an endogenous oscillatory rhythm that governs the daily activities of organisms in nature. It offers adaptive advantages to organisms through a coordination of their biological functions with the optimal time of day. In this paper, a model of the circadian system in the plant Arabidopsis (species thaliana) is built by using system identification techniques. Prior knowledge about the physical interactions of the genes and the proteins in the plant circadian system is incorporated in the model building exercise. The model is built by using primarily experimentally-verified direct interactions between the genes and the proteins with the available data on mRNA and protein abundances from the circadian system. Our analysis reveals a great performance of the model in predicting the dynamics of the plant circadian system through the effect of diverse internal and external perturbations (gene knockouts and day-length changes). Furthermore, we found that the circadian oscillatory rhythm is robust and does not vary much with the biochemical parameters except those of a light-sensitive protein P and a transcription factor TOC1. In other words, the circadian rhythmic profile is largely a consequence of the network's architecture rather than its particular parameters. Our work suggests that the current experimental knowledge of the gene-to-protein interactions in the plant Arabidopsis, without considering any additional hypothetical interactions, seems to suffice for system-level modeling of the circadian system of this plant and to present an exemplary platform for the control of network dynamics in complex living organisms.

'System-of-systems' approach for interdependent critical infrastructures

International Nuclear Information System (INIS)

Eusgeld, Irene; Nan, Cen; Dietz, Sven

2011-01-01

The study of the interdependencies within critical infrastructures (CI) is a growing field of research as the importance of potential failure propagation among infrastructures may lead to cascades affecting all supply networks. New powerful methods are required to model and describe such 'systems-of-systems' (SoS) as a whole. An overall model is required to provide security and reliability assessment taking into account various kinds of threats and failures. A significant challenge associated with this model may be to create 'what-if' scenarios for the analysis of interdependencies. In this paper the interdependencies between industrial control systems (ICS), in particular SCADA (Supervisory Control and Data Acquisition), and the underlying critical infrastructures to address the vulnerabilities related to the coupling of these systems are analyzed. The modeling alternatives for system-of-systems, integrated versus coupled models, are discussed. An integrated model contains detailed low level models of (sub)systems as well as a high level model, covering all hierarchical levels. On the other hand, a coupled model aggregates different simulated outputs of the low level models as inputs at a higher level. Strengths and weaknesses of both approaches are analyzed and a model architecture for SCADA and the 'system under control' are proposed. Furthermore, the HLA simulation standard is introduced and discussed in this paper as a promising approach to represent interdependencies between infrastructures. To demonstrate the capabilities of the HLA standard for the interdependencies study, an exemplary application and some first results are also briefly presented in this paper.

78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

Science.gov (United States)

2013-09-23

... American Industry Classification System Based Federal Wage System Wage Surveys AGENCY: U.S. Office of... in Federal Wage System wage survey industry regulations with the 2012 NAICS revisions published by.... Applicability date: This rule applies for local wage surveys beginning on or after February 21, 2014. FOR...

A coordination model for ultra-large scale systems of systems

Directory of Open Access Journals (Sweden)

Manuela L. Bujorianu

2013-11-01

Full Text Available The ultra large multi-agent systems are becoming increasingly popular due to quick decay of the individual production costs and the potential of speeding up the solving of complex problems. Examples include nano-robots, or systems of nano-satellites for dangerous meteorite detection, or cultures of stem cells for organ regeneration or nerve repair. The topics associated with these systems are usually dealt within the theories of intelligent swarms or biologically inspired computation systems. Stochastic models play an important role and they are based on various formulations of the mechanical statistics. In these cases, the main assumption is that the swarm elements have a simple behaviour and that some average properties can be deduced for the entire swarm. In contrast, complex systems in areas like aeronautics are formed by elements with sophisticated behaviour, which are even autonomous. In situations like this, a new approach to swarm coordination is necessary. We present a stochastic model where the swarm elements are communicating autonomous systems, the coordination is separated from the component autonomous activity and the entire swarm can be abstracted away as a piecewise deterministic Markov process, which constitutes one of the most popular model in stochastic control. Keywords: ultra large multi-agent systems, system of systems, autonomous systems, stochastic hybrid systems.

Multiobjective Collaborative Optimization of Systems of Systems

National Research Council Canada - National Science Library

Wolf, Robert A

2005-01-01

...; in other words an inefficient design of the system of systems. This thesis examines the simultaneous design of several ships using the sea base concept as an example application of a network of ships working together...

Nova control system: goals, architecture, and system design

International Nuclear Information System (INIS)

Suski, G.J.; Duffy, J.M.; Gritton, D.G.; Holloway, F.W.; Krammen, J.R.; Ozarski, R.G.; Severyn, J.R.; Van Arsdall, P.J.

1982-01-01

The control system for the Nova laser must operate reliably in a harsh pulse power environment and satisfy requirements of technical functionality, flexibility, maintainability and operability. It is composed of four fundamental subsystems: Power Conditioning, Alignment, Laser Diagnostics, and Target Diagnostics, together with a fifth, unifying subsystem called Central Controls. The system architecture utilizes a collection of distributed microcomputers, minicomputers, and components interconnected through high speed fiber optic communications systems. The design objectives, development strategy and architecture of the overall control system and each of its four fundamental subsystems are discussed. Specific hardware and software developments in several areas are also covered

Systems Engineering Leadership Development: Advancing Systems Engineering Excellence

Science.gov (United States)

Hall, Phil; Whitfield, Susan

2011-01-01

This slide presentation reviews the Systems Engineering Leadership Development Program, with particular emphasis on the work being done in the development of systems engineers at Marshall Space Flight Center. There exists a lack of individuals with systems engineering expertise, in particular those with strong leadership capabilities, to meet the needs of the Agency's exploration agenda. Therefore there is a emphasis on developing these programs to identify and train systems engineers. The presentation reviews the proposed MSFC program that includes course work, and developmental assignments. The formal developmental programs at the other centers are briefly reviewed, including the Point of Contact (POC)

Development of brake assist system. Summary of hydraulic brake assist system; Brake assist system no kaihatsu. Ekiatsushiki brake assist system no gaiyo

Energy Technology Data Exchange (ETDEWEB)

Hara, M; Ota, M; Shimizu, S [Toyota, Motor Corp., Aichi (Japan)

1997-10-01

We have already developed vacuum-booster-type Brake Assist System that supplies additional braking power when panic braking is recognized. We are convinced that the expansion of Brake Assist System will become more important issue in the future. Therefore we have developed hydraulic Brake Assist System with increasing its controllability and reducing its discomfort. This system have a brake pressure sensor to detect emergency braking operation and an antilock device to supply additional braking power. 8 refs., 11 figs.

Symmetric linear systems - An application of algebraic systems theory

Science.gov (United States)

Hazewinkel, M.; Martin, C.

1983-01-01

Dynamical systems which contain several identical subsystems occur in a variety of applications ranging from command and control systems and discretization of partial differential equations, to the stability augmentation of pairs of helicopters lifting a large mass. Linear models for such systems display certain obvious symmetries. In this paper, we discuss how these symmetries can be incorporated into a mathematical model that utilizes the modern theory of algebraic systems. Such systems are inherently related to the representation theory of algebras over fields. We will show that any control scheme which respects the dynamical structure either implicitly or explicitly uses the underlying algebra.

Designing information systems

CERN Document Server

Blethyn, Stanley G

2014-01-01

Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

Bioregenerative Life Support Systems Test Complex (Bio-Plex) Food Processing System: A Dual System

Science.gov (United States)

Perchonok, Michele; Vittadini, Elena; Peterson, Laurie J.; Swango, Beverly E.; Toerne, Mary E.; Russo, Dane M. (Technical Monitor)

2001-01-01

A Bioregenerative Life Support Test Complex, BIO-Plex, is currently being constructed at the Johnson Space Center (JSC) in Houston, TX. This facility will attempt to answer the questions involved in developing a lunar or planetary base. The Food Processing System (FPS) of the BIO-Plex is responsible for supplying food to the crew in coordination with the chosen mission scenario. Long duration space missions require development of both a Transit Food System and of a Lunar or Planetary Food System. These two systems are intrinsically different since the first one will be utilized in the transit vehicle in microgravity conditions with mostly resupplied foods, while the second will be used in conditions of partial gravity (hypogravity) to process foods from crops grown in the facility. The Transit Food System will consist of prepackaged food of extended shelf life. It will be supplemented with salad crops that will be consumed fresh. Microgravity imposes significant limitation on the ability to handle food and allows only for minimal processing. The challenge is to develop food systems similar to the International Space Station or Shuttle Food Systems but with a shelf life of 3 - 5 years. The Lunar or Planetary Food System will allow for food processing of crops due to the presence of some gravitational force (1/6 to 1/3 that of Earth). Crops such as wheat, soybean, rice, potato, peanut, and salad crops, will be processed to final products to provide a nutritious and acceptable diet for the crew. Not only are constraints imposed on the FPS from the crops (e.g., crop variation, availability, storage and shelf-life) but also significant requirements are present for the crew meals (e.g., RDA, high quality, safety, variety). The FPS becomes a fulcrum creating the right connection from crops to crew meals while dealing with issues of integration within a closed self-regenerative system (e.g., safe processing, waste production, volumes, air contaminations, water usage, etc

Solar/electric heating systems for the future energy system

Energy Technology Data Exchange (ETDEWEB)

Furbo, S.; Dannemand, M.; Perers, B. [and others

2013-05-15

The aim of the project is to elucidate how individual heating units for single family houses are best designed in order to fit into the future energy system. The units are based on solar energy, electrical heating elements/heat pump, advanced heat storage tanks and advanced control systems. Heat is produced by solar collectors in sunny periods and by electrical heating elements/heat pump. The electrical heating elements/heat pump will be in operation in periods where the heat demand cannot be covered by solar energy. The aim is to use the auxiliary heating units when the electricity price is low, e.g. due to large electricity production by wind turbines. The unit is equipped with an advanced control system where the control of the auxiliary heating is based on forecasts of the electricity price, the heat demand and the solar energy production. Consequently, the control is based on weather forecasts. Three differently designed heating units are tested in a laboratory test facility. The systems are compared on the basis of: 1) energy consumption for the auxiliary heating; 2) energy cost for the auxiliary heating; 3) net utilized solar energy. Starting from a normal house a solar combi system (for hot water and house heating) can save 20-30% energy cost, alone, depending on sizing of collector area and storage volume. By replacing the heat storage with a smart tank based on electric heating elements and a smart control based on weather/load forecast and electricity price information 24 hours ahead, another 30-40% can be saved. That is: A solar heating system with a solar collector area of about 10 m{sup 2}, a smart tank based on electric heating element and a smart control system, can reduce the energy costs of the house by at least 50%. No increase of heat storage volume is needed to utilize the smart control. The savings in % are similar for different levels of building insulation. As expected a heat pump in the system can further reduce the auxiliary electricity

Spill operation system decision support system

International Nuclear Information System (INIS)

Clark, R.

1992-01-01

The MSRC Spill Operation System (SOS) is a tool for the support of decision-making at the time of a catastrophic oil spill. SOS provides MSRC decision-makers with access to information about the source of the spill, the spill environment, and the availability of spill response resources. This system is designed to meet the information needs of a Response Supervisor, an Environmental Advisor, Logistics/Maintenance Supervisor, Operations Supervisor, and the MSRC Regional General Manager. The SOS project Objectives are: (1) integrate currently available data, systems, and technologies; (2) develop an application that effectively supports mobilized operations and can be adapted to support normal operations; (3) ensure that the development of computer applications is driven by user needs and not by technology; and (4) coordinate with government and other industry organizations to avoid duplication of effort. Design Objectives for SOS are: (1) centralize management information storage while decentralizing decision making capabilities; (2) boost User confidence by providing a system that is easy to learn, easy to use, and is open-quotes Sailor Proofclose quotes; and (3) use visualization technology in providing spill related information. This approach includes the use of Geographic Information System (GIS) technology for maps and geographically associated resource; and support MSRC's concept of operation which includes - a swift notification of response personnel; fast mobilization of response resources; and accurate tracking of resources during a spill. MSRC is organized into five responsibility regions

Internet based remote cooperative engineering system for NSSS system design

International Nuclear Information System (INIS)

Kim, Y. S.; Lee, S. L.

2000-01-01

Implementation of information technology system through the nuclear power plant life cycle which covers site selection, design, construction, operation and decommission has been suggested continually by the reports or guidelines from NIRMA, INPO, NUMARC, USNRC and EPRI since late 1980's, and some of it has been actually implemented and applied partially to the practical design process. However, for the NSSS system design, a high level activity of nuclear power plant design phase, none of the effects has been reported with regard to implementing the information system. In Korea, KAERI studied NuIDEAS(Nuclear Integrated Database and Design Advancement System) in 1995, and KAERI (Korea Electric Power Research Institute) worked with CENP (Combustion Engineering Nuclear Power) for KNGR IMS(Information Management System) in 1997 as trials to adopt information system for NSSS system design. In this paper, after reviewing the pre-studied two information system, we introduce implementation of the information system for NSSS system design which is compatible with the on-going design works and can be used as means of concurrent engineering through internet. With this electronic design system, we expect increase of the design efficiency and productivity by switching from hard copy based design flow to internet based system. In addition, reliability and traceability of the design data is highly elevated by containing the native document file together with all the review, comment and resolution history in one database

Design Flaws and Service System Breakdowns: Learning from Systems Thinking

Directory of Open Access Journals (Sweden)

David Ing

2014-12-01

Full Text Available In what ways might systems thinking be helpful to designers?  In the 21st century, the types of project with which designers have become engaged has expanded to include service systems.  Service systems are typically composites of mechanisms, organisms, human beings and ecologies.  Systems thinking is a perspective with theories, methods and practices that enables transcending disciplinary boundaries.  Application of systems thinking in designing a service system can aid in surfacing potential flaws and/or anticipating future breakdowns in functions, structures and/or processes. Designers and systems thinkers should work together to improve the nature of service systems.  As a starter set into these conversations, seven conditions are proposed as a starting context.  These conditions are presented neither as rigourously defined nor as exhaustive, but as an entry point into future joint engagement.

Communication Systems and Study Method for Active Distribution Power systems

DEFF Research Database (Denmark)

Wei, Mu; Chen, Zhe

Due to the involvement and evolvement of communication technologies in contemporary power systems, the applications of modern communication technologies in distribution power system are becoming increasingly important. In this paper, the International Organization for Standardization (ISO......) reference seven-layer model of communication systems, and the main communication technologies and protocols on each corresponding layer are introduced. Some newly developed communication techniques, like Ethernet, are discussed with reference to the possible applications in distributed power system....... The suitability of the communication technology to the distribution power system with active renewable energy based generation units is discussed. Subsequently the typical possible communication systems are studied by simulation. In this paper, a novel method of integrating communication system impact into power...

Automation of Aditya vacuum control system based on CODAC Core System

Energy Technology Data Exchange (ETDEWEB)

Raulji, Vismaysinh D., E-mail: vismay@ipr.res.in; Pujara, Harshad; Arambhadiya, Bharat; Jadeja, Kumarpalsinh; Bhatt, Shailesh; Rajpal, Rachana

2016-11-15

Highlights: • Monitor and control of vacuum control system based on CODAC Core System. • Communication between SIEMENS PLC and open source software EPICS. • With CODAC Core easy to configure and programming of slow controller. - Abstract: The main objective of vacuum control system is to provide ultrahigh vacuum for Aditya Tokamak operations. Aditya Vacuum vessel is having four vacuum pumping lines. To demonstrate implementation of automation; a study case is under taken by automating single Pumping Line of the Aditya vacuum system using CODAC Core System (CCS). Currently, vacuum system is operated manually. The CCS based control system allows remote control, monitoring, alarm handling of vacuum parameters. The CODAC Core System is the Linux based software package that is distributed by ITER Organization for the development of Plant System I&C software. CODAC Core System includes EPICS, CSS (Control System Studio) etc. CSS is used for HMI (Human Machine Interface), alarms and archives. SDD (Self Description Data) tool is used to configure plant system I&C. SDD Editor is an Eclipse based application to define the plant system, interface, I&C component, interfaced signals, configure variable. SCADA (Supervisory Control and Data Acquisition) system is developed in CSS. Data is transferred between PLC and CSS through EPICS. The complete system is tested with Aditya Vacuum Control System with process interlocks. Operator interface is also developed using Lab VIEW as a choice of the user. This paper will describe the salient features of the developed control system in detail.

National Ignition Facility system design requirements Laser System SDR002

International Nuclear Information System (INIS)

Larson, D.W.; Bowers, J.M.; Bliss, E.S.; Karpenko, V.P.; English, E.

1996-01-01

This System Design Requirement document establishes the performance, design, development, and test requirements for the NIP Laser System. The Laser System generates and delivers high-power optical pulses to the target chamber, and is composed of all optical puke creating and transport elements from Puke Generation through Final Optics as well as the special equipment that supports, energizes and controls them. The Laser System consists of the following WBS elements: 1.3 Laser System 1.4 Beam Transport System 1.6 Optical Components 1.7 Laser Control 1.8.7 Final Optics

2014 Runtime Systems Summit. Runtime Systems Report

Energy Technology Data Exchange (ETDEWEB)

Sarkar, Vivek [US Dept. of Energy, Washington, DC (United States); Budimlic, Zoran [US Dept. of Energy, Washington, DC (United States); Kulkani, Milind [US Dept. of Energy, Washington, DC (United States)

2016-09-19

This report summarizes runtime system challenges for exascale computing, that follow from the fundamental challenges for exascale systems that have been well studied in past reports, e.g., [6, 33, 34, 32, 24]. Some of the key exascale challenges that pertain to runtime systems include parallelism, energy efficiency, memory hierarchies, data movement, heterogeneous processors and memories, resilience, performance variability, dynamic resource allocation, performance portability, and interoperability with legacy code. In addition to summarizing these challenges, the report also outlines different approaches to addressing these significant challenges that have been pursued by research projects in the DOE-sponsored X-Stack and OS/R programs. Since there is often confusion as to what exactly the term “runtime system” refers to in the software stack, we include a section on taxonomy to clarify the terminology used by participants in these research projects. In addition, we include a section on deployment opportunities for vendors and government labs to build on the research results from these projects. Finally, this report is also intended to provide a framework for discussing future research and development investments for exascale runtime systems, and for clarifying the role of runtime systems in exascale software.

A Review of Decisions Support Systems for Manufacturing Systems

OpenAIRE

Felsberger, Andreas; Oberegger, Bernhard; Reiner, Gerald

2017-01-01

In the field of manufacturing systems automated data acquisition and development of technological innovations like manufacturing execution systems (MES), Enterprise Resource Planning (ERP), Advanced Planning Systems (APS) and new trends in Big Data and Business Intelligence (BI) have given rise to new applications and methods of existing decisionsupport technologies. Today manufacturers need an adaptive system that helps to react and adapt to the constantly changing business environment. The ...

Novel electro-hydraulic position control system for primary mirror supporting system

Directory of Open Access Journals (Sweden)

Xiongbin Peng

2016-05-01

Full Text Available In the field of modern large-scale telescope, primary mirror supporting system technology faces the difficulties of theoretically uniform output force request and bias compensation. Therefore, a novel position control system combining hydraulic system with servo motor system is introduced. The novel system ensures uniform output force on supporting points without complicating the mechanical structure. The structures of both primary mirror supporting system and novel position system are described. Then, the mathematical model of novel position control system is derived for controller selection. A proportional–derivative controller is adopted for simulations and experiments of step response and triangle path tracking. The results show that proportional–derivative controller guarantees the system with micrometer-level positioning ability. A modified proportional–derivative controller is utilized to promote system behavior with faster response overshoot. The novel position control system is then applied on primary mirror supporting system. Coupling effect is observed among actuator partitions, and relocation of virtual pivot supporting point is chosen as the decoupling measurement. The position keeping ability of the primary mirror supporting system is verified by rotating the mirror cell at a considerably high rate. The experiment results show that the decoupled system performs better with smaller bias and shorter recovery time.

Expert systems and computer based industrial systems

International Nuclear Information System (INIS)

Dunand, R.

1989-01-01

Framentec is the artificial intelligence subsidiary of FRAMATOME. It is involved in expert-system activities of Shells, developments, methodology and software for maintenance (Maintex) and consulting and methodology. Specific applications in the nuclear field are presented. The first is an expert system to assist in the piping support design prototype, the second is an expert system that assists an ultrasonic testing operator in determining the nature of a welding defect and the third is a welding machine diagnosis advisor. Maintex is a software tool to provide assistance in the repair of complex industrial equipment. (author)

Expert-systems and computer-based industrial systems

International Nuclear Information System (INIS)

Terrien, J.F.

1987-01-01

Framatome makes wide use of expert systems, computer-assisted engineering, production management and personnel training. It has set up separate business units and subsidiaries and also participates in other companies which have the relevant expertise. Five examples of the products and services available in these are discussed. These are in the field of applied artificial intelligence and expert-systems, in integrated computer-aid design and engineering, structural analysis, computer-related products and services and document management systems. The structure of the companies involved and the work they are doing is discussed. (UK)

Information system development activities and inquiring systems

DEFF Research Database (Denmark)

Carugati, Andrea

2008-01-01

This article presents a framework that maps information system development (ISD) activities on systems for the creation of knowledge. This work addresses the relevant and persisting problem of improving the chances of ISD success. The article builds upon previous research on knowledge aspects...... based on ISD literature and on Churchman's (1971) inquiring systems. The second part presents the use of the framework in an ISD project. The case is used to show the applicability of the framework and to highlight the advantages of this approach. The main theoretical implication is that the framework...

The Physics of transmutation systems : system capabilities and performances

International Nuclear Information System (INIS)

Finck, P. J.

2002-01-01

This document is complementary to a document produced by Prof. Salvatores on ''The Physics of Transmutation in Critical or Subcritical Reactors and the Impact on the Fuel Cycle''. In that document, Salvatores describes the fundamental of transmutation, through basic physics properties and general parametric studies. In the present document we try to go one step further towards practical implementation (while recognizing that the practical issues such as technology development and demonstration, and economics, can only be mentioned in a very superficial manner). Section 1 briefly overviews the possible objectives of transmutation systems, and links these different objectives to possible technological paths. It also describes the overall constraints which have to be considered when developing and implementing transmutation systems. In section 2 we briefly overview the technological constraints which need to be accounted for when designing transmutation systems. In section 3 we attempt to provide a simplified classification of transmutation systems in order to clarify later comparisons. It compares heterogeneous and homogeneous recycle strategies, and single and multi-tier systems. Section 4 presents case analyses for assessing the transmutation performance of various individual systems, starting with LWR's ((1) generic results; (2) multirecycle of plutonium; (3) an alternative: transmutation based on a Thorium fuel cycle), followed by Gas-Cooled Reactors (with an emphasis on the ''deep burn'' approach), and followed by Fast Reactors and Accelerator Driven systems ((1) generic results; (2) homogeneous recycle of transuranics; (3) practical limit between Fast Reactors and Accelerator Driven Systems) Section 5 summarizes recent results on integrated system performances. It focuses first on interface effects between the two elements of a dual tier system, and then summarizes the major lessons learned from recent global physics studies

Development of field navigation system; Field navigation system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Ibara, S; Minode, M; Nishioka, K [Daihatsu Motor Co. Ltd., Osaka (Japan)

1995-04-20

This paper describes the following matters on a field navigation system developed for the purpose of covering a field of several kilometer square. This system consists of a center system and a vehicle system, and the center system comprises a map information computer and a communication data controlling computer; since the accuracy for a vehicle position detected by a GPS is not sufficient, an attempt of increasing the accuracy of vehicle position detection is made by means of a hybrid system; the hybrid system uses a satellite navigation method of differential system in which the error components in the GPS are transmitted from the center, and also uses a self-contained navigation method which performs an auxiliary function when the accuracy in the GPS has dropped; corrected GPS values, emergency messages to all of the vehicles and data of each vehicle position are communicated by wireless transmission in two ways between the center and vehicles; and accommodation of the map data adopted a system that can respond quickly to any change in roads and facilities. 3 refs., 13 figs., 1 tab.

GEOMASS system

International Nuclear Information System (INIS)

Ohyama, Takuya; Saegusa, Hiromitsu

2009-03-01

As a part of the research and development regarding characterisation of deep geological environment, the GEOMASS (GEOLOGICAL MODELLING ANALYSIS AND SIMULATION SOFTWARE) system has been developed by the Japan Atomic Energy Agency in order to carry out geological and hydrogeological modelling and groundwater flow simulation and so on. The GEOMASS system integrates a commercial geological interpretation system (EarthVision), which is used for geological modelling and visualisation, with a proprietary code for groundwater flow (FracAffinity). This integrated system allows users to make rapid improvement of models as data increases. Also, it is possible to perform more realistic groundwater flow simulation due to the capability of modelling the rock mass as a continuum with discrete hydro-structural features in the rock mass. This paper consists of 'Overview of GEOMASS system', FracAffinity Theoretical Background' and 'FracAffinity User Guide' and is edited as a GEOMASS system manual. 'Overview of GEOMASS system' describes the outline of this system. 'FracAffinity Theoretical Background' describes the information of technical background of FracAffinity software. FracAffinity User Guide' describes the structure of the FracAffinity input files, the usage of FracAffinity Interface and flow-solver. Updating of the FracAffinity has been continued as needed and FracAffinity version3.3 is the latest version at present (July 2008). (author)

Automated Information System (AIS) Alarm System

International Nuclear Information System (INIS)

Hunteman, W.

1997-01-01

The Automated Information Alarm System is a joint effort between Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratory to demonstrate and implement, on a small-to-medium sized local area network, an automated system that detects and automatically responds to attacks that use readily available tools and methodologies. The Alarm System will sense or detect, assess, and respond to suspicious activities that may be detrimental to information on the network or to continued operation of the network. The responses will allow stopping, isolating, or ejecting the suspicious activities. The number of sensors, the sensitivity of the sensors, the assessment criteria, and the desired responses may be set by the using organization to meet their local security policies

Automated Information System (AIS) Alarm System

Energy Technology Data Exchange (ETDEWEB)

Hunteman, W.

1997-05-01

The Automated Information Alarm System is a joint effort between Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratory to demonstrate and implement, on a small-to-medium sized local area network, an automated system that detects and automatically responds to attacks that use readily available tools and methodologies. The Alarm System will sense or detect, assess, and respond to suspicious activities that may be detrimental to information on the network or to continued operation of the network. The responses will allow stopping, isolating, or ejecting the suspicious activities. The number of sensors, the sensitivity of the sensors, the assessment criteria, and the desired responses may be set by the using organization to meet their local security policies.

Licensing management system prototype system design

International Nuclear Information System (INIS)

Immerman, W.H.; Arcuni, A.A.; Elliott, J.M.; Chapman, L.D.

1983-11-01

This report is a design document for a prototype implementation of a licensing management system (LMS) as defined in SAND83-7080. It describes the concept of operations for full implementation of an LMS in accordance with the previously defined functional requirements. It defines a subset of a full LMS suitable for meeting prototype implementation goals, and proposes a system design for this subset. The report describes overall system design considerations consistent with, but more explicit than the general characteristics required by the LMS functional definition. A high level design is presented for just those functions selected for prototype implementation. The report also provides a data element dictionary describing the structured logical data elements required to implement the selected functions

Study of operational systems of gamma spectrometry systems

International Nuclear Information System (INIS)

Melo, M.C. de.

1985-07-01

The application of gamma spectrometers is tantamount to the perfect knowledge of their operational characteristics. Thus a study of the most significant characteristics (stability, linearity of response, energy resolution and peak efficiency) was carried out with an NaI(T1) and an (HP)Ge systems. Gamma standards with an energy range of 60 to 1300 KeV were used. Simple numerical methods were applied to the data, and the Behaviour of each system, with regard to the aforementioned characteristics, was observed for several operation voltages. It was evident the superiority of the (HP)Ge system in stability, linearity and resolution, whereas the NaI(T1) system showed a greater efficiency. The results obtained for each system were consistent with the ones found elsewhere, so that it may be concluded that both are working properly, and that the methodology proposed herein is appropriate for the test of such equipments [pt

System importance measures: A new approach to resilient systems-of-systems

Science.gov (United States)

Uday, Payuna

Resilience is the ability to withstand and recover rapidly from disruptions. While this attribute has been the focus of research in several fields, in the case of system-of-systems (SoSs), addressing resilience is particularly interesting and challenging. As infrastructure SoSs, such as power, transportation, and communication networks, grow in complexity and interconnectivity, measuring and improving the resilience of these SoSs is vital in terms of safety and providing uninterrupted services. The characteristics of systems-of-systems make analysis and design of resilience challenging. However, these features also offer opportunities to make SoSs resilient using unconventional methods. In this research, we present a new approach to the process of resilience design. The core idea behind the proposed design process is a set of system importance measures (SIMs) that identify systems crucial to overall resilience. Using the results from the SIMs, we determine appropriate strategies from a list of design principles to improve SoS resilience. The main contribution of this research is the development of an aid to design that provides specific guidance on where and how resources need to be targeted. Based on the needs of an SoS, decision-makers can iterate through the design process to identify a set of practical and effective design improvements. We use two case studies to demonstrate how the SIM-based design process can inform decision-making in the context of SoS resilience. The first case study focuses on a naval warfare SoS and describes how the resilience framework can leverage existing simulation models to support end-to-end design. We proceed through stages of the design approach using an agent-based model (ABM) that enables us to demonstrate how simulation tools and analytical models help determine the necessary inputs for the design process and, subsequently, inform decision-making regarding SoS resilience. The second case study considers the urban

Qt based GUI system for EPICS control systems

International Nuclear Information System (INIS)

Rhyder, A.; Fernandes, R.N.; Starritt, A.

2012-01-01

The Qt-based GUI system developed at the Australian Synchrotron for use on EPICS control systems has recently been enhanced to including support for imaging, plotting, user login, logging and configuration recipes. Plans are also being made to broaden its appeal within the wider EPICS community by expanding the range of development options and adding support for EPICS V4. Current features include graphical and non-graphical application development as well as simple 'code-free' GUI design. Additional features will allow developers to let the GUI system handle its own data using Qt-based EPICS-aware classes or, as an alternative, use other control systems data such as PSI's CAFE. (author)

LANL environmental restoration site ranking system: System description. Final report

International Nuclear Information System (INIS)

Merkhofer, L.; Kann, A.; Voth, M.

1992-01-01

The basic structure of the LANL Environmental Restoration (ER) Site Ranking System and its use are described in this document. A related document, Instructions for Generating Inputs for the LANL ER Site Ranking System, contains detailed descriptions of the methods by which necessary inputs for the system will be generated. LANL has long recognized the need to provide a consistent basis for comparing the risks and other adverse consequences associated with the various waste problems at the Lab. The LANL ER Site Ranking System is being developed to help address this need. The specific purpose of the system is to help improve, defend, and explain prioritization decisions at the Potential Release Site (PRS) and Operable Unit (OU) level. The precise relationship of the Site Ranking System to the planning and overall budget processes is yet to be determined, as the system is still evolving. Generally speaking, the Site Ranking System will be used as a decision aid. That is, the system will be used to aid in the planning and budgetary decision-making process. It will never be used alone to make decisions. Like all models, the system can provide only a partial and approximate accounting of the factors important to budget and planning decisions. Decision makers at LANL will have to consider factors outside of the formal system when making final choices. Some of these other factors are regulatory requirements, DOE policy, and public concern. The main value of the site ranking system, therefore, is not the precise numbers it generates, but rather the general insights it provides

LANL environmental restoration site ranking system: System description. Final report

Energy Technology Data Exchange (ETDEWEB)

Merkhofer, L.; Kann, A.; Voth, M. [Applied Decision Analysis, Inc., Menlo Park, CA (United States)

1992-10-13

The basic structure of the LANL Environmental Restoration (ER) Site Ranking System and its use are described in this document. A related document, Instructions for Generating Inputs for the LANL ER Site Ranking System, contains detailed descriptions of the methods by which necessary inputs for the system will be generated. LANL has long recognized the need to provide a consistent basis for comparing the risks and other adverse consequences associated with the various waste problems at the Lab. The LANL ER Site Ranking System is being developed to help address this need. The specific purpose of the system is to help improve, defend, and explain prioritization decisions at the Potential Release Site (PRS) and Operable Unit (OU) level. The precise relationship of the Site Ranking System to the planning and overall budget processes is yet to be determined, as the system is still evolving. Generally speaking, the Site Ranking System will be used as a decision aid. That is, the system will be used to aid in the planning and budgetary decision-making process. It will never be used alone to make decisions. Like all models, the system can provide only a partial and approximate accounting of the factors important to budget and planning decisions. Decision makers at LANL will have to consider factors outside of the formal system when making final choices. Some of these other factors are regulatory requirements, DOE policy, and public concern. The main value of the site ranking system, therefore, is not the precise numbers it generates, but rather the general insights it provides.

Improving electrical equipment and control systems for shield integrated mining systems

Energy Technology Data Exchange (ETDEWEB)

Rabinovich, Z.M.; Starikov, B.Ya.; Kibrik, I.S.

1984-06-01

The design and operation are discussed for electrical equipment and control systems for the 1AShchM, the ANShch and the 2ANShch shield integrated face systems consisting of shield supports, coal plow and chain conveyor. The shield system is used for mining inclined and steep coal seams endangered by coal dust explosions, methane or rock bursts. Control and electrical system for 3 types of shield face mining systems is similar. It cuts energy supply when methane content at working faces exceeds the maximum permissible level, controls haulage rate and cutting rate of a coal plow, controls operation of shield supports (using the Sirena system), controls dust suppression system and its water consumption. The system is also equipped with communications equipment. Tests of the control and electrical system for the integrated shield system carried out in the im. Gagarin mine in the Ukraine are described. The VAUS III control system developed by Dongiprouglemash was tested.

Radiometric system for clinical applications in the National Health System

International Nuclear Information System (INIS)

Mesa Perez, G.; Arteche Diaz, R.; Camejo Batista, A.; Fonfria Bragado, C.

2013-01-01

In this paper it is presented the radiometric detection system SRNIC-02, manufactured at CEADEN. The system has three major components: a well-type Nal(TI) scintillator detector with its collimator, a measurement module, and the application software, which allows fixing the working parameters of the system, as well as the acquisition and processing of data. The system has two main applications in the National Health System, one for the quality control in Radiopharmacy, and in RIA/IRMA blood tests. There are 16 systems installed, in 13 provinces of the country up to this date. (Author)

Marketing reporting system

OpenAIRE

Hanić Hasan M.

2004-01-01

The main components of a developed and good organized marketing information system are: internal reporting system, marketing reporting system, market research system and analytical marketing system. Marketing reporting system provides data and information about changes in business and micro marketing environment. This component of MIS ensures that marketing managers are up-to-date with what is going on, and to be informed about changes in company marketing environment.

Marketing reporting system

Directory of Open Access Journals (Sweden)

Hanić Hasan M.

2004-01-01

Full Text Available The main components of a developed and good organized marketing information system are: internal reporting system, marketing reporting system, market research system and analytical marketing system. Marketing reporting system provides data and information about changes in business and micro marketing environment. This component of MIS ensures that marketing managers are up-to-date with what is going on, and to be informed about changes in company marketing environment.

Knochen, Herz und Gefäße – „Bone-Vascular Axis“: Eine systematische Übersicht prospektiver Beobachtungsstudien // The Bone-Cardiovascular Axis: A Systematic Review of Prospective Studies

Directory of Open Access Journals (Sweden)

Tomaschitz A

2016-01-01

Full Text Available Both cardiovascular diseases and osteoporosis are related to an enormous economic burden and increased risk of morbidity and mortality. In the last years an intensive interplay between the bone and vasculature – the bone-vascular axis – and the cooccurrence of cardiovascular and bone diseases in various populations have been increasingly documented. The interdependence of heart and vascular physiology, skeletogenesis and bone mineralization is translated into clinically relevant associations between cardiovascular diseases and osteoporosis irrespective of kidney function or vascular calcification. Observational studies confirmed an independent relationship between bone loss, osteoporotic fractures and atherosclerotic diseases.br In a systematic literature search (Medline, Pubmed we identified 49 prospective observational studies which investigated the association between cardiovascular diseases, osteoporosis, bone mineral density and fracture risk. A great majority of these longitudinal analyses, which were however characterized by large heterogeneity in study population, duration of follow-up and considerations of potential confounders, revealed an increased risk of cardiovascular morbidity and mortality in women and men with low bone mineral density at different locations as well as in those with previous osteoporotic fractures. In addition, several studies noted a higher risk for the development of osteoporosis and osteoporotic fractures in patients with cardiovascular diseases. In particular, consistent associations were found between heart failure (7 studies, stroke (16 studies, peripheral arterial disease (3 studies and both osteoporosis and fracture risk, respectively.br Observational studies provided in this systemic review are limited in several fields similar to previous analyses, which identified currently accepted risk factors for osteoporosis and subsequent fracture risk. In view of the burden associated with cardiovascular and

Solar system astrophysics planetary atmospheres and the outer solar system

CERN Document Server

Milone, Eugene F

2014-01-01

The second edition of Solar System Astrophysics: Planetary Atmospheres and the Outer Solar System provides a timely update of our knowledge of planetary atmospheres and the bodies of the outer solar system and their analogs in other planetary systems. This volume begins with an expanded treatment of the physics, chemistry, and meteorology of the atmospheres of the Earth, Venus, and Mars, moving on to their magnetospheres and then to a full discussion of the gas and ice giants and their properties. From here, attention switches to the small bodies of the solar system, beginning with the natural satellites. Then comets, meteors, meteorites, and asteroids are discussed in order, and the volume concludes with the origin and evolution of our solar system. Finally, a fully revised section on extrasolar planetary systems puts the development of our system in a wider and increasingly well understood galactic context. All of the material is presented within a framework of historical importance. This book and its sist...

Pressurized water reactor system model for control system design and analysis

International Nuclear Information System (INIS)

Cooper, K.F.; Cain, J.T.

1975-01-01

Satisfactory operation of present generation Pressurized Water Reactor (PWR) Nuclear Power systems requires that several independent and interactive control systems be designed. Since it is not practical to use an actual PWR system as a design tool, a mathematical model of the system must be developed as a design and analysis tool. The model presented has been developed to be used as an aid in applying optimal control theory to design and implement new control systems for PWR plants. To be applicable, the model developed must represent the PWR system in its normal operating range. For safety analysis the operating conditions of the system are usually abnormal and, therefore, the system modeling requirements are different from those for control system design and analysis

Power system reliability memento; Memento de la surete du systeme electrique

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The reliability memento of the French power system (national power transmission grid) is an educational document which purpose is to point out the role of each one as regards power system operating reliability. This memento was first published in 1999. Extensive changes have taken place since then. The new 2002 edition shows that system operating reliability is as an important subject as ever: 1 - foreword; 2 - system reliability: the basics; 3 - equipment measures taken in order to guarantee the reliability of the system; 4 - organisational and human measures taken to guarantee the reliability of the system; appendix 1 - system operation: basic concepts; appendix 2 - guiding principles governing the reliability of the power system; appendix 3 - international associations of transmission system operators; appendix 4 - description of major incidents.

Development of personnel dose control system and whole body counter system

International Nuclear Information System (INIS)

Ooki, Yasushi; Harato, Kenji

2005-01-01

We delivered Personnel Dose Control System to Higashidohri nuclear plant of Tohoku Electric Power Company, in November 2004. In this system development, we automated the registration of radiation worker with close link between this system and Whole Body Counter System. In addition, this system enables the user to reduce workload for accumulation and notification of personal exposure data, because we adopted the system to extract the data effectively operating the terminal PC which the associate company gets ready in their office. We also delivered Whole body Counter System in December 2004, which was developed to measure internal exposure without feeling of oppression in chair-style device for the first time in Japan. This system enables non-operator system for measurement allowing workers to operate by themselves. (author)

Energy Systems High-Pressure Test Laboratory | Energy Systems Integration

Science.gov (United States)

Facility | NREL Energy Systems High-Pressure Test Laboratory Energy Systems High-Pressure Test Laboratory In the Energy Systems Integration Facility's High-Pressure Test Laboratory, researchers can safely test high-pressure hydrogen components. Photo of researchers running an experiment with a hydrogen fuel

System Engineering Analysis For Improved Scout Business Information Systems

Energy Technology Data Exchange (ETDEWEB)

Van Slyke, D. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-01-30

The project uses system engineering principles to address the need of Boy Scout leaders for an integrated system to facilitate advancement and awards records, leader training and planning for meetings and activities. Existing products to address needs of Scout leaders and relevant stakeholders function to support record keeping and some communication functions but opportunity exists for a better system to fully integrate these functions with training delivery and recording, activity planning along with feedback and information gathering from stakeholders. Key stakeholders for the sytem include Scouts and their families, leaders, training providers, sellers of supplies and awards, content generators and facilities that serve Scout activities. Key performance parameters for the system are protection of personal information, availability of current information, information accuracy and information content that has depth. Implementation concepts considered for the system include (1) owned and operated by Boy Scouts of America, (2) Contracted out to a vendor (3) distributed system that functions with BSA managed interfaces. The selected concept is to contract out to a vendor to maximize the likelihood of successful integration and take advantage of the best technology. Development of requirements considers three key use cases (1) System facilitates planning a hike with training needed satisfied in advance and advancement recording real time (2) Scheduling and documenting in-person training, (3) Family interested in Scouting receives information and can request follow-up. Non-functional requirements are analyzed with the Quality Function Deployment tool. Requirement addressing frequency of backup, compatibility with legacy and new technology, language support, software update are developed to address system reliability and intuitive interface. System functions analyzed include update of activity database, maintenance of advancement status, archive of documents, and

Adaptive security systems -- Combining expert systems with adaptive technologies

International Nuclear Information System (INIS)

Argo, P.; Loveland, R.; Anderson, K.

1997-01-01

The Adaptive Multisensor Integrated Security System (AMISS) uses a variety of computational intelligence techniques to reason from raw sensor data through an array of processing layers to arrive at an assessment for alarm/alert conditions based on human behavior within a secure facility. In this paper, the authors give an overview of the system and briefly describe some of the major components of the system. This system is currently under development and testing in a realistic facility setting

COGNITIVE SYSTEMS. REDEFINING THE COOPERATION BETWEEN MAN AND SYSTEM

OpenAIRE

Diana-Aderina MOISUC; Mihai-Constantin AVORNICULUI; Melinda Timea FÜLÖP

2016-01-01

Cognitive systems appeared as a response to the real challenges brought by the Big Data phenomenon. It was found that the solutions for solving difficult problems caused by this phenomenon could be brought by using artificial intelligence tools. In this context a convergence between Big Data and Artificial Intelligence happened, which determined the start of a new stage in system development, namely the era of cognitive systems. The potential of these systems is given by the characteristics t...

Computer systems and software description for gas characterization system

International Nuclear Information System (INIS)

Vo, C.V.

1997-01-01

The Gas Characterization System Project was commissioned by TWRS management with funding from TWRS Safety, on December 1, 1994. The project objective is to establish an instrumentation system to measure flammable gas concentrations in the vapor space of selected watch list tanks, starting with tank AN-105 and AW-101. Data collected by this system is meant to support first tank characterization, then tank safety. System design is premised upon Characterization rather than mitigation, therefore redundancy is not required

Micro Information Systems

DEFF Research Database (Denmark)

Ulslev Pedersen, Rasmus; Kühn Pedersen, Mogens

2014-01-01

such as medical and manufacturing. These new sensor applications have implications for information systems (IS) and, the authors visualize this new class of information systems as fractals growing from an established class of systems; namely that of information systems (IS). The identified applications...... and implications are used as an empirical basis for creating a model for these small new information systems. Such sensor systems are called embedded systems in the technical sciences, and the authors want to couple it with general IS. They call the merger of these two important research areas (IS and embedded...... systems) for micro information systems (micro-IS). It is intended as a new research field within IS research. An initial framework model is established, which seeks to capture both the possibilities and constraints of this new paradigm, while looking simultaneously at the fundamental IS and ICT aspects...

Systems Thinking : Ancient Maya's Evolution of Consciousness and Contemporary Systems Thinking

Science.gov (United States)

Jere Lazanski, Tadeja

2010-11-01

Systems thinking as a modern approach for problem solving was revived after WWII even though it had been an ancient philosophy. We can track systems thinking back to antiquity. Making a distinction from Western rationalist traditions of philosophy, C. West Churchman often identified with the I Ching as a systems approach sharing a frame of reference similar to pre-Socratic philosophy and Heraclitus. In this paper, we will compare the evolutionary system of consciousness, which was presented in the Tun calendar of Mayan Indians and contemporary systems theory and systems thinking, which is nothing else but highly evolved human consciousness in society. We will present Mayan calendar systems to contemporary systems thinking principles and explain the answer to the Ackoff's judgment on four hundred years of analytical thinking as the dominant mode of society. We will use the methods of historical comparison and a method of a systems approach. We will point out the big picture and Mayan divine plan as main systems principles. The Mayan numerical system and long count units has been proven as one of the most accurate systems for describing the present and future of the civilization in which we have all evolved. We will also explain the Mayan nine-level pyramids system that represents the evolutionary system, i.e. the consciousness, which in our time shows the actual level of human consciousness. Deriving from all described, we will show the main systems principles, discussed by contemporary systems authors and Mayan systems principles, which differ only in one expression—they named "the big picture" as "the divine plan". The final results can be perfectly applied to the society we live in. Seeing the world from the big picture point of view is reaching a level of awareness, in which linear thinking is replaced by systems thinking. The Mayans explained that the civilization would achieve the system of conscious co-creation. We can claim that linear thinking guides us

7th Annual Systems Biology Symposium: Systems Biology and Engineering

Energy Technology Data Exchange (ETDEWEB)

Galitski, Timothy P.

2008-04-01

Systems biology recognizes the complex multi-scale organization of biological systems, from molecules to ecosystems. The International Symposium on Systems Biology has been hosted by the Institute for Systems Biology in Seattle, Washington, since 2002. The annual two-day event gathers the most influential researchers transforming biology into an integrative discipline investingating complex systems. Engineering and application of new technology is a central element of systems biology. Genome-scale, or very small-scale, biological questions drive the enigneering of new technologies, which enable new modes of experimentation and computational analysis, leading to new biological insights and questions. Concepts and analytical methods in engineering are now finding direct applications in biology. Therefore, the 2008 Symposium, funded in partnership with the Department of Energy, featured global leaders in "Systems Biology and Engineering."

Cold Vacuum Drying Instrument Air System Design Description. System 12

International Nuclear Information System (INIS)

SHAPLEY, B.J.; TRAN, Y.S.

2000-01-01

This system design description (SDD) addresses the instrument air (IA) system of the spent nuclear fuel (SNF). This IA system provides instrument quality air to the Cold Vacuum Drying (CVD) Facility. The IA system is a general service system that supports the operation of the heating, ventilation, and air conditioning (HVAC) system, the process equipment skids, and process instruments in the CVD Facility. The following discussion is limited to the compressor, dryer, piping, and valving that provide the IA as shown in Drawings H-1-82222, Cold Vacuum Drying Facility Mechanical Utilities Compressed and Instrument Air PandID, and H-1.82161, Cold Vacuum Drying Facility Process Equipment Skid PandID MCO/Cusk Interface. Figure 1-1 shows the physical location of the 1A system in the CVD Facility

Environmental health surveillance system; Kankyo hoken surveillance system

Energy Technology Data Exchange (ETDEWEB)

Ono, M. [National Inst. for Environmental Studies, Tsukuba (Japan)

1998-02-01

The Central Environmental Pollution Prevention Council pointed out the necessity to establish an environmental health surveillance system (hereinafter referred to as System) in its report `on the first type district specified by the Environmental Pollution Caused Health Damages Compensation Act,` issued in 1986. A study team, established in Environment Agency, has been discussing to establish System since 1986. This paper outlines System, and some of the pilot surveillance results. It is not aimed at elucidation of the cause-effect relationships between health and air pollution but at discovery of problems, in which the above relationships in a district population are monitored periodically and continuously from long-term and prospective viewpoints, in order to help take necessary measures in the early stage. System is now collecting the data of the chronic obstructive lung diseases on a nation-wide scale through health examinations of 3-year-old and preschool children and daily air pollution monitoring. 6 refs., 3 figs., 1 tab.

Systemic design methodologies for electrical energy systems analysis, synthesis and management

CERN Document Server

Roboam, Xavier

2012-01-01

This book proposes systemic design methodologies applied to electrical energy systems, in particular analysis and system management, modeling and sizing tools. It includes 8 chapters: after an introduction to the systemic approach (history, basics & fundamental issues, index terms) for designing energy systems, this book presents two different graphical formalisms especially dedicated to multidisciplinary devices modeling, synthesis and analysis: Bond Graph and COG/EMR. Other systemic analysis approaches for quality and stability of systems, as well as for safety and robustness analysis tools are also proposed. One chapter is dedicated to energy management and another is focused on Monte Carlo algorithms for electrical systems and networks sizing. The aim of this book is to summarize design methodologies based in particular on a systemic viewpoint, by considering the system as a whole. These methods and tools are proposed by the most important French research laboratories, which have many scientific partn...

Review of Recommender Systems Algorithms Utilized in Social Networks based e-Learning Systems & Neutrosophic System

Directory of Open Access Journals (Sweden)

A. A. Salama

2015-03-01

Full Text Available In this paper, we present a review of different recommender system algorithms that are utilized in social networks based e-Learning systems. Future research will include our proposed our e-Learning system that utilizes Recommender System and Social Network. Since the world is full of indeterminacy, the neutrosophics found their place into contemporary research. The fundamental concepts of neutrosophic set, introduced by Smarandache in [21, 22, 23] and Salama et al. in [24-66].The purpose of this paper is to utilize a neutrosophic set to analyze social networks data conducted through learning activities.

MAINTENANCE MANAGEMENT ACCOUNTING SYSTEM OF WASTE WATER DISPOSAL SYSTEMS

Science.gov (United States)

Hori, Michihiro; Tsuruta, Takashi; Kaito, Kiyoyuki; Kobayashi, Kiyoshi

Sewage works facilities consist of various assets groups. And there are many kinds of financial resources. In order to optimize the maintenance plan, and to secure the stability and sustainability of sewage works management, it is necessary to carry out financial simulation based on the life-cycle cost analysis. Furthermore, it is important to develop management accounting system that is interlinked with the financial accounting system, because many sewage administration bodies have their financial accounting systems as public enterprises. In this paper, a management accounting system, which is designed to provide basic information for asset management of sewage works facilities, is presented. Also the applicability of the management accounting system presented in this paper is examined through financial simulations.

Radio frequency tags systems to initiate system processing

Science.gov (United States)

Madsen, Harold O.; Madsen, David W.

1994-09-01

This paper describes the automatic identification technology which has been installed at Applied Magnetic Corp. MR fab. World class manufacturing requires technology exploitation. This system combines (1) FluoroTrac cassette and operator tracking, (2) CELLworks cell controller software tools, and (3) Auto-Soft Inc. software integration services. The combined system eliminates operator keystrokes and errors during normal processing within a semiconductor fab. The methods and benefits of this system are described.

The System of Systems Architecture Feasibility Assessment Model

Science.gov (United States)

2016-06-01

can be used in conjunction with any specific systems engineering methodology (e.g., the waterfall, vee, or spiral ) (Beery 2016). The MEASA is...DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) This research presents the system of systems (SoS) tradespace definition methodology (SoS-TDM) and...SoSE) methodologies . In particular, they extend the methods of tradespace exploration to considerations of multiple perspectives of an SoS—the physical

System design considerations for fast-neutron interrogation systems

International Nuclear Information System (INIS)

Micklich, B.J.; Curry, B.P.; Fink, C.L.; Smith, D.L.; Yule, T.J.

1993-01-01

Nonintrusive interrogation techniques that employ fast neutrons are of interest because of their sensitivity to light elements such as carbon, nitrogen, and oxygen. The primary requirement of a fast-neutron inspection system is to determine the value of atomic densities, or their ratios, over a volumetric grid superimposed on the object being interrogated. There are a wide variety of fast-neutron techniques that can provide this information. The differences between the various nuclear systems can be considered in light of the trade-offs relative to the performance requirements for each system's components. Given a set of performance criteria, the operational requirements of the proposed nuclear systems may also differ. For instance, resolution standards will drive scanning times and tomographic requirements, both of which vary for the different approaches. We are modelling a number of the fast-neutron interrogation techniques currently under consideration, to include Fast Neutron Transmission Spectroscopy (FNTS), Pulsed Fast Neutron Analysis (PFNA), and its variant, 14-MeV Associated Particle Imaging (API). The goals of this effort are to determine the component requirements for each technique, identify trade-offs that system performance standards impose upon those component requirements, and assess the relative advantages and disadvantages of the different approaches. In determining the component requirements, we will consider how they are driven by system performance standards, such as image resolution, scanning time, and statistical uncertainty. In considering the trade-offs between system components, we concentrate primarily on those which are common to all approaches, for example: source characteristics versus detector array requirements. We will then use the analysis to propose some figures-of-merit that enable performance comparisons between the various fast-neutron systems under consideration. The status of this ongoing effort is presented

Nuclear instrumentation system for the integrated digital I and C system

International Nuclear Information System (INIS)

Isobe, Yuji; Nakamura, Shingo

2005-01-01

Development of a new nuclear instrumentation (NI) system has been done. The new system is suitable for the digital instrumentation and control (I and C) systems. Higher reliability and lower development costs have been achieved by applying good performance circuits with sufficient experience of the conventional NI system. Human-system interface (HSI) and maintainability have been improved comparing with the conventional NI system because of the partial digitalisation. The new NI system has been manufactured and validated. We are finally verifying the total performance now

Nuclear instrumentation system for the integrated digital I and C system

Energy Technology Data Exchange (ETDEWEB)

Isobe, Yuji [Mitsubishi Heavy Industries, Tokyo (Japan); Nakamura, Shingo [Mitsubishi, Electric Corporation, Tokyo (Japan)

2005-11-15

Development of a new nuclear instrumentation (NI) system has been done. The new system is suitable for the digital instrumentation and control (I and C) systems. Higher reliability and lower development costs have been achieved by applying good performance circuits with sufficient experience of the conventional NI system. Human-system interface (HSI) and maintainability have been improved comparing with the conventional NI system because of the partial digitalisation. The new NI system has been manufactured and validated. We are finally verifying the total performance now.

Operationalizing sustainability in urban coastal systems: a system dynamics analysis.

Science.gov (United States)

Mavrommati, Georgia; Bithas, Kostas; Panayiotidis, Panayiotis

2013-12-15

We propose a system dynamics approach for Ecologically Sustainable Development (ESD) in urban coastal systems. A systematic analysis based on theoretical considerations, policy analysis and experts' knowledge is followed in order to define the concept of ESD. The principles underlying ESD feed the development of a System Dynamics Model (SDM) that connects the pollutant loads produced by urban systems' socioeconomic activities with the ecological condition of the coastal ecosystem that it is delineated in operational terms through key biological elements defined by the EU Water Framework Directive. The receiving waters of the Athens Metropolitan area, which bears the elements of typical high population density Mediterranean coastal city but which currently has also new dynamics induced by the ongoing financial crisis, are used as an experimental system for testing a system dynamics approach to apply the concept of ESD. Systems' thinking is employed to represent the complex relationships among the components of the system. Interconnections and dependencies that determine the potentials for achieving ESD are revealed. The proposed system dynamics analysis can facilitate decision makers to define paths of development that comply with the principles of ESD. Copyright © 2013 Elsevier Ltd. All rights reserved.

Depth protection system

International Nuclear Information System (INIS)

Arita, Setsuo; Izumi, Shigeru; Suzuki, Satoru; Noguchi, Atomi.

1988-01-01

Purpose: To previously set a nuclear reactor toward safety side by the reactor scram if an emergency core cooling system is failed to operate. Constitution If abnormality occurs in an emergency core cooling system or an aqueous boric acid injection system, a reactor protection system is operated and, if the reactor protection system shows an abnormal state, a control rod withdrawal inhibition system is operated as a fundamental way. For instance, when the driving power source voltage for the emergency core cooling system is detected and, if it is lower than a predetermined value, the reactor protection system is operated. Alternatively, if the voltage goes lower than the predetermined value, the control rod withdrawal is inhibited. In addition, stopping for the feedwater system is inhibited. Further, integrity of the driving means for the emergency core cooling system is positively checked and the protection function is operated depending on the result of check. Since the nuclear reactor can be set toward the safety side even if the voltage for the driving power source of the aqueous boric acid injection system is lower than a predetermined value, the reactor safety can further be improved. (Horiuchi, T.)

Probabilistic fuzzy systems as additive fuzzy systems

NARCIS (Netherlands)

Almeida, R.J.; Verbeek, N.; Kaymak, U.; Costa Sousa, da J.M.; Laurent, A.; Strauss, O.; Bouchon-Meunier, B.; Yager, R.

2014-01-01

Probabilistic fuzzy systems combine a linguistic description of the system behaviour with statistical properties of data. It was originally derived based on Zadeh’s concept of probability of a fuzzy event. Two possible and equivalent additive reasoning schemes were proposed, that lead to the

Transdisciplinarity Needs Systemism

Directory of Open Access Journals (Sweden)

Wolfgang Hofkirchner

2017-02-01

Full Text Available The main message of this paper is that systemism is best suited for transdisciplinary studies. A description of disciplinary sciences, transdisciplinary sciences and systems sciences is given, along with their different definitions of aims, scope and tools. The rationale for transdisciplinarity is global challenges, which are complex. The rationale for systemism is the concretization of understanding complexity. Drawing upon Ludwig von Bertalanffy’s intention of a General System Theory, three items deserve attention—the world-view of a synergistic systems technology, the world picture of an emergentist systems theory, and the way of thinking of an integrationist systems method.

System specification for the integrated monitoring and surveillance system

International Nuclear Information System (INIS)

1997-09-01

This System Specification establishes the requirements for the Plutonium Focus Area (PFA) Integrated Monitoring and Surveillance System (IMSS). In this document, ''Integrated Monitoring and Surveillance System'' is used to describe the concept of integrated sensors, computers, personnel, and systems that perform the functions of sensing conditions, acquiring data, monitoring environmental safety and health, controlling and accounting for materials, monitoring material stability, monitoring container integrity, transferring data, and analyzing, reporting, and storing data. This concept encompasses systems (e.g. sensors, personnel, databases, etc.) that are already in place at the sites but may require modifications or additions to meet all identified surveillance requirements. The purpose of this System Specification is to provide Department of Energy (DOE) sites that store plutonium materials with a consolidation of all known requirements for the storage and surveillance of 3013 packages of stabilized plutonium metals and oxides. This compilation may be used (1) as a baseline for surveillance system design specifications where 3013 packages of stabilized plutonium metals and oxides will be stored and monitored; (2) as a checklist for evaluating existing surveillance systems to ensure that all requirements are met for the storage and surveillance of 3013 packages of stabilized plutonium metals and oxides; and (3) as a baseline for preparing procurement specifications tailored for site specific storage and surveillance of 3013 packages of stabilized plutonium metals and oxides

Commercial information system of Slovak Electricity Transmission System, Plc

International Nuclear Information System (INIS)

Laznicka, L.

2004-01-01

Commercial Information System (CIS), which main role of is to support the commercial activities of the company, is built up by business department of SEPS, Plc in close co-operation with the supplier company Sfera, Plc. The system entries are data from electricity meters obtained by automatized data acquisition and from bugging sheets, contractual hour diagrams, parameters of transmission system like measuring schemes and formulas for calculation of demand and supply, contractual data resulting from agreements, business conditions, URSO decisions and valid legislative. A part of the system is also support of process of data evaluation like calculation of transmitted energy quantity, calculation of actual output diagrams, comparison of actual and contractual diagrams, calculation of system divergence, calculation of demand divergence, etc. The final price for the drawings of services, which are joined with transmission of the electric power will be determined by the accounting process. In this causality there are automatically made out invoices for access, losses, system charges, system services, short-term and long-term transits, divergences and for cross-border transmission auctions. System also generates various specialized synopses and statistics for the evaluation requirements of important aspects and for parameter observations. Successive liberalisation of the electricity power market, changes in legislative and URSO decisions require CIS to be sufficiently configurable and to adapt flexible on the alternating environs. (author)

System architecture for microprocessor based protection system

International Nuclear Information System (INIS)

Gallagher, J.M. Jr.; Lilly, G.M.

1976-01-01

This paper discusses the architectural design features to be employed by Westinghouse in the application of distributed digital processing techniques to the protection system. While the title of the paper makes specific reference to microprocessors, this is only one (and the newest) of the building blocks which constitutes a distributed digital processing system. The actual system structure (as realized through utilization of the various building blocks) is established through considerations of reliability, licensability, and cost. It is the intent of the paper to address these considerations licenstions as they relate to the architectural design features. (orig.) [de

Navigation and Positioning System Using High Altitude Platforms Systems (HAPS)

Science.gov (United States)

Tsujii, Toshiaki; Harigae, Masatoshi; Harada, Masashi

Recently, some countries have begun conducting feasibility studies and R&D projects on High Altitude Platform Systems (HAPS). Japan has been investigating the use of an airship system that will function as a stratospheric platform for applications such as environmental monitoring, communications and broadcasting. If pseudolites were mounted on the airships, their GPS-like signals would be stable augmentations that would improve the accuracy, availability, and integrity of GPS-based positioning systems. Also, the sufficient number of HAPS can function as a positioning system independent of GPS. In this paper, a system design of the HAPS-based positioning system and its positioning error analyses are described.

NASA Advanced Explorations Systems: Advancements in Life Support Systems

Science.gov (United States)

Shull, Sarah A.; Schneider, Walter F.

2016-01-01

The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA's Habitability Architecture Team (HAT). The LSS project is focused on four areas: architecture and systems engineering for life support systems, environmental monitoring, air revitalization, and wastewater processing and water management. Starting with the international space station (ISS) LSS systems as a point of departure (where applicable), the mission of the LSS project is three-fold: 1. Address discrete LSS technology gaps 2. Improve the reliability of LSS systems 3. Advance LSS systems towards integrated testing on the ISS. This paper summarized the work being done in the four areas listed above to meet these objectives. Details will be given on the following focus areas: Systems Engineering and Architecture- With so many complex systems comprising life support in space, it is important to understand the overall system requirements to define life support system architectures for different space mission classes, ensure that all the components integrate well together and verify that testing is as representative of destination environments as possible. Environmental Monitoring- In an enclosed spacecraft that is constantly operating complex machinery for its own basic functionality as well as science experiments and technology demonstrations, it's possible for the environment to become compromised. While current environmental monitors aboard the ISS will alert crew members and mission control if there is an emergency, long-duration environmental monitoring cannot be done in-orbit as current methodologies

Intelligent systems

CERN Document Server

Irwin, J David

2011-01-01

Technology has now progressed to the point that intelligent systems are replacing humans in the decision making processes as well as aiding in the solution of very complex problems. In many cases intelligent systems are already outperforming human activities. Artificial neural networks are not only capable of learning how to classify patterns, such images or sequence of events, but they can also effectively model complex nonlinear systems. Their ability to classify sequences of events is probably more popular in industrial applications where there is an inherent need to model nonlinear system

A system of system lenses for leadership decision-making.

Science.gov (United States)

Cady, Phil

2016-01-01

The sheer volume and dynamics among system agents in healthcare makes decision-making a daunting task at all levels. Being clear about what leaders mean by "healthcare system" is critical in aligning system strategy and leadership decision-making. This article presents an emerging set of lenses (ideology and beliefs, rational and irrational information processing, interpersonal social dynamics, process and value creation, and context) to help frame leadership decision-making in healthcare systems. © 2015 The Canadian College of Health Leaders.

Remote diagnosis system for control and instrumentation systems

International Nuclear Information System (INIS)

Ito, Tetsuo; Suzuki, Satoshi; Nagaoka, Yukio.

1990-01-01

Control and instrumentation (C and I) systems for nuclear power plants tend to consist of many distributed digital controllers connected with transmission networks. Important parts of the C and I systems are redundantly constructed so that the failure of a component does not readily have a critical effect on the plant operation. It is necessary, however, to localize the faulty component for establishing better availability and maintainability of the plant. To diagnose failure of the C and I systems effectively, a remote diagnosis system is required that diagnoses anomalies of their controllers remotely from a central control room and identifies the fault location. Various fault diagnosis methods that apply artificial intelligence have been proposed for electronic circuits. Their knowledge bases are classified into two categories. One is rule-based knowledge, describing relations between anomaly phenomena and causes. The other is structure-based knowledge, which represents the configuration and functions of diagnosed objects. Though the latter is more suitable for deep inference, it is difficult to use for describing the detailed structure of large-scaled digital C and I systems. Then, a fault diagnosis system was developed that uses both knowledge bases and offers substantial man/machine interface functions for practical use

Effects of the Autonomic Nervous System, Central Nervous System ...

African Journals Online (AJOL)

The gastrointestinal tract is chiefly involved in the digestion of ingested food, facilitation of absorption process and expulsion of the undigested food material through motility process. Motility is influenced by neurohormonal system which is associated with the enteric nervous system , autonomic nervous system and the ...

Cut-and-Paste file-systems : integrating simulators and file systems

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1996-01-01

We have implemented an integrated and configurable file system called the PFS and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-system algorithms, PFS is used for on-line file-system data storage. Algorithms are first analyzed in Patsy and when we are

Transport concept of new waste management system (inner packaging system)

International Nuclear Information System (INIS)

Hakozaki, K.; Wada, R.

2004-01-01

Kobe Steel, Ltd. (KSL) and Transnuclear Tokyo (TNT) have jointly developed a new waste management system concept (called ''Inner packaging system'') for high dose rate wastes generated from nuclear power plants under cooperation with Tokyo Electric Power Company (TEPCO). The inner packaging system is designed as a total management system dedicated to the wastes from nuclear plants in Japan, covering from the wastes conditioning in power plants up to the disposal in final repository. This paper presents the new waste management system concept

One-dimensional autonomous systems and dissipative systems

International Nuclear Information System (INIS)

Lopez, G.

1996-01-01

The Lagrangian and the Generalized Linear Momentum are given in terms of a constant of motion for a one-dimensional autonomous system. The possibility of having an explicit Hamiltonian expression is also analyzed. The approach is applied to some dissipative systems. Copyright copyright 1996 Academic Press, Inc

Energy System Analysis of 100 Per cent Renewable Energy Systems

DEFF Research Database (Denmark)

Lund, Henrik; Mathiesen, Brian Vad

2007-01-01

This paper presents the methodology and results of the overall energy system analysis of a 100 per cent renewable energy system. The input for the systems is the result of a project of the Danish Association of Engineers, in which 1600 participants during more than 40 seminars discussed...... and designed a model for the future energy system of Denmark, putting emphasis on energy efficiency, CO2 reduction, and industrial development. The energy system analysis methodology includes hour by hour computer simulations leading to the design of flexible energy systems with the ability to balance...... the electricity supply and demand and to exchange electricity productions on the international electricity markets. The results are detailed system designs and energy balances for two energy target years: year 2050 with 100 per cent renewable energy from biomass and combinations of wind, wave and solar power...

Land system science and sustainable development of the earth system

DEFF Research Database (Denmark)

Verburg, Peter H.; Crossman, Neville; Ellis, Erle C.

2015-01-01

Land systems are the result of human interactions with the natural environment. Understanding the drivers, state, trends and impacts of different land systems on social and natural processes helps to reveal how changes in the land system affect the functioning of the socio-ecological system...... as a whole and the tradeoff these changes may represent. The Global Land Project has led advances by synthesizing land systems research across different scales and providing concepts to further understand the feedbacks between social-and environmental systems, between urban and rural environments and between...... distant world regions. Land system science has moved from a focus on observation of change and understanding the drivers of these changes to a focus on using this understanding to design sustainable transformations through stakeholder engagement and through the concept of land governance. As land use can...

Embedded System Implementation on FPGA System With μCLinux OS

International Nuclear Information System (INIS)

Amin, Ahmad Fairuz Muhd; Aris, Ishak; Abdullah, Raja Syamsul Azmir Raja; Sahbudin, Ratna Kalos Zakiah

2011-01-01

Embedded systems are taking on more complicated tasks as the processors involved become more powerful. The embedded systems have been widely used in many areas such as in industries, automotives, medical imaging, communications, speech recognition and computer vision. The complexity requirements in hardware and software nowadays need a flexibility system for further enhancement in any design without adding new hardware. Therefore, any changes in the design system will affect the processor that need to be changed. To overcome this problem, a System On Programmable Chip (SOPC) has been designed and developed using Field Programmable Gate Array (FPGA). A softcore processor, NIOS II 32-bit RISC, which is the microprocessor core was utilized in FPGA system together with the embedded operating system(OS), μClinux. In this paper, an example of web server is explained and demonstrated

Embedded System Implementation on FPGA System With μCLinux OS

Science.gov (United States)

Fairuz Muhd Amin, Ahmad; Aris, Ishak; Syamsul Azmir Raja Abdullah, Raja; Kalos Zakiah Sahbudin, Ratna

2011-02-01

Embedded systems are taking on more complicated tasks as the processors involved become more powerful. The embedded systems have been widely used in many areas such as in industries, automotives, medical imaging, communications, speech recognition and computer vision. The complexity requirements in hardware and software nowadays need a flexibility system for further enhancement in any design without adding new hardware. Therefore, any changes in the design system will affect the processor that need to be changed. To overcome this problem, a System On Programmable Chip (SOPC) has been designed and developed using Field Programmable Gate Array (FPGA). A softcore processor, NIOS II 32-bit RISC, which is the microprocessor core was utilized in FPGA system together with the embedded operating system(OS), μClinux. In this paper, an example of web server is explained and demonstrated

Embedded System Implementation on FPGA System With {mu}CLinux OS

Energy Technology Data Exchange (ETDEWEB)

Amin, Ahmad Fairuz Muhd [Institute of Advanced Technology, Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Aris, Ishak [Department of Electrical and Electronic Engineering, Universiti Putra Malaysia, 43400, Serdang, Selangor (Malaysia); Abdullah, Raja Syamsul Azmir Raja; Sahbudin, Ratna Kalos Zakiah, E-mail: gs20613@mutiara.upm.edu.my, E-mail: ishak@eng.upm.edu.my, E-mail: rsa@eng.upm.edu.my [Department of Computer and Communication Systems Engineering, Universiti Putra Malaysia, 43400, Serdang, Selangor (Malaysia)

2011-02-15

Embedded systems are taking on more complicated tasks as the processors involved become more powerful. The embedded systems have been widely used in many areas such as in industries, automotives, medical imaging, communications, speech recognition and computer vision. The complexity requirements in hardware and software nowadays need a flexibility system for further enhancement in any design without adding new hardware. Therefore, any changes in the design system will affect the processor that need to be changed. To overcome this problem, a System On Programmable Chip (SOPC) has been designed and developed using Field Programmable Gate Array (FPGA). A softcore processor, NIOS II 32-bit RISC, which is the microprocessor core was utilized in FPGA system together with the embedded operating system(OS), {mu}Clinux. In this paper, an example of web server is explained and demonstrated

Fault Diagnosis of Power Systems Using Intelligent Systems

Science.gov (United States)

Momoh, James A.; Oliver, Walter E. , Jr.

1996-01-01

The power system operator's need for a reliable power delivery system calls for a real-time or near-real-time Al-based fault diagnosis tool. Such a tool will allow NASA ground controllers to re-establish a normal or near-normal degraded operating state of the EPS (a DC power system) for Space Station Alpha by isolating the faulted branches and loads of the system. And after isolation, re-energizing those branches and loads that have been found not to have any faults in them. A proposed solution involves using the Fault Diagnosis Intelligent System (FDIS) to perform near-real time fault diagnosis of Alpha's EPS by downloading power transient telemetry at fault-time from onboard data loggers. The FDIS uses an ANN clustering algorithm augmented with a wavelet transform feature extractor. This combination enables this system to perform pattern recognition of the power transient signatures to diagnose the fault type and its location down to the orbital replaceable unit. FDIS has been tested using a simulation of the LeRC Testbed Space Station Freedom configuration including the topology from the DDCU's to the electrical loads attached to the TPDU's. FDIS will work in conjunction with the Power Management Load Scheduler to determine what the state of the system was at the time of the fault condition. This information is used to activate the appropriate diagnostic section, and to refine if necessary the solution obtained. In the latter case, if the FDIS reports back that it is equally likely that the faulty device as 'start tracker #1' and 'time generation unit,' then based on a priori knowledge of the system's state, the refined solution would be 'star tracker #1' located in cabinet ITAS2. It is concluded from the present studies that artificial intelligence diagnostic abilities are improved with the addition of the wavelet transform, and that when such a system such as FDIS is coupled to the Power Management Load Scheduler, a faulty device can be located and isolated

Small solar system bodies as granular systems

Science.gov (United States)

Hestroffer, Daniel; Campo Bagatín, Adriano; Losert, Wolfgang; Opsomer, Eric; Sánchez, Paul; Scheeres, Daniel J.; Staron, Lydie; Taberlet, Nicolas; Yano, Hajime; Eggl, Siegfried; Lecomte, Charles-Edouard; Murdoch, Naomi; Radjai, Fahrang; Richardson, Derek C.; Salazar, Marcos; Schwartz, Stephen R.; Tanga, Paolo

2017-06-01

Asteroids and other Small Solar System Bodies (SSSBs) are currently of great scientific and even industrial interest. Asteroids exist as the permanent record of the formation of the Solar System and therefore hold many clues to its understanding as a whole, as well as insights into the formation of planetary bodies. Additionally, SSSBs are being investigated in the context of impact risks for the Earth, space situational awareness and their possible industrial exploitation (asteroid mining). In all these aspects, the knowledge of the geophysical characteristics of SSSB surface and internal structure are of great importance. Given their size, constitution, and the evidence that many SSSBs are not simple monoliths, these bodies should be studied and modelled as self-gravitating granular systems in general, or as granular systems in micro-gravity environments in particular contexts. As such, the study of the geophysical characteristics of SSSBs is a multi-disciplinary effort that lies at the crossroads between Granular Mechanics, Celestial Mechanics, Soil Mechanics, Aerospace Engineering and Computer Sciences.