WorldWideScience

Sample records for radiogallium scans concise

  1. Extrapulmonary sites of radiogallium accumulation in sarcoidosis

    Energy Technology Data Exchange (ETDEWEB)

    Sulavik, S.B.; Palestro, C.J.; Spencer, R.P.; Swyer, A.J.; Goldsmith, S.J.; Tierstein, A.S. (Univ. of Connecticut Health Center, Farmington (USA))

    1990-12-01

    In an effort to detect extrapulmonary sites of radiogallium accumulation in cases of sarcoidosis, 145 separate Ga-67 citrate studies of 114 patients with biopsy-proven sarcoidosis were examined. The most characteristic extrapulmonary radiogallium uptake pattern was the panda sign in 47 patients (41%). The most common site of prominent extrapulmonary radiogallium uptake was the lacrimal glands in 101 patients (88%). Second most common was activity in one or more superficial lymph node regions such as the cervical, axillary, femoral, or inguinal in 19 patients (17%). Other extrapulmonary sites included breast uptake in 6 out of 80 women (8%), prominent splenic and nasal uptake in 9 (8%) patients, periportal accumulation in 7 (6%), and cutaneous/subcutaneous activity in 4 (4%). Because many of these individuals were receiving corticosteroids, the natural (untreated) prevalence of extrapulmonary findings may be even higher. Although the sensitivity and specificity of extrapulmonary radiogallium accumulation has still to be determined, many of the sites may be accessible to biopsy both for diagnostic purposes and to follow the effects of medications. It is therefore suggested that whole-body imaging be performed when radiogallium is administered to patients with suspected or known sarcoidosis.

  2. A technical study to economize the amount of zinc used in the production of radiogallium

    Energy Technology Data Exchange (ETDEWEB)

    Kandil, Shaban A.; Al-Abyad, Mogahed [Atomic Energy Authority, Cairo (Egypt). Physics Dept. - Cyclotron Facility; Szuecs, Zoltan [Hungarian Academy of Sciences (ATOMKI), Debrecen (Hungary). Inst. of Nuclear Research

    2017-04-01

    For the production of radiogallium, the targets were prepared in two forms, namely, electroplated metal and pressed oxide. The target holder was selected from Cu-metal as a circular disk. The experimental yields of {sup 66,67,68}Ga produced from both irradiated {sup nat}ZnO and zinc metal targets are given and compared with the estimated yields as well as with the previously reported values. The ZnO target developed in this work appears to be more convenient and economical for local production of short-lived radiogallium, e.g. {sup 66}Ga and {sup 68}Ga.

  3. Computer science a concise introduction

    CERN Document Server

    Sinclair, Ian

    2014-01-01

    Computer Science: A Concise Introduction covers the fundamentals of computer science. The book describes micro-, mini-, and mainframe computers and their uses; the ranges and types of computers and peripherals currently available; applications to numerical computation; and commercial data processing and industrial control processes. The functions of data preparation, data control, computer operations, applications programming, systems analysis and design, database administration, and network control are also encompassed. The book then discusses batch, on-line, and real-time systems; the basic

  4. The Concise Encyclopedia of Statistics

    CERN Document Server

    Dodge, Yadolah

    2008-01-01

    The Concise Encyclopedia of Statistics presents the essential information about statistical tests, concepts, and analytical methods in language that is accessible to practitioners and students of the vast community using statistics in medicine, engineering, physical science, life science, social science, and business/economics. The reference is alphabetically arranged to provide quick access to the fundamental tools of statistical methodology and biographies of famous statisticians. The more than 500 entries include definitions, history, mathematical details, limitations, examples, references,

  5. Concise Synthesis of Broussonone A

    Directory of Open Access Journals (Sweden)

    Hyeju Jo

    2015-09-01

    Full Text Available A concise and expeditious approach to the total synthesis of broussonone A, a p-quinol natural compound, has been developed. The key features of the synthesis include the Grubbs II catalyst mediated cross metathesis of two aromatic subunits, and a chemoselective oxidative dearomatizationin the presence of two phenol moieties. Especially, optimization associated with the CM reaction of ortho-alkoxystyrenes was also studied, which are known to be ineffective for Ru-catalyzed metathesis reactions under conventional reaction conditions because ortho-alkoxy group could coordinate to the ruthenium center, resulting in the potential complication of catalyst inhibition.

  6. A concise introduction to analysis

    CERN Document Server

    Stroock, Daniel W

    2015-01-01

    This book provides an introduction to the basic ideas and tools used in mathematical analysis. It is a hybrid cross between an advanced calculus and a more advanced analysis text and covers topics in both real and complex variables. Considerable space is given to developing Riemann integration theory in higher dimensions, including a rigorous treatment of Fubini's theorem, polar coordinates and the divergence theorem. These are used in the final chapter to derive Cauchy's formula, which is then applied to prove some of the basic properties of analytic functions. Among the unusual features of this book is the treatment of analytic function theory as an application of ideas and results in real analysis. For instance, Cauchy's integral formula for analytic functions is derived as an application of the divergence theorem. The last section of each chapter is devoted to exercises that should be viewed as an integral part of the text. A Concise Introduction to Analysis should appeal to upper level undergraduate math...

  7. CRC concise encyclopedia of mathematics

    CERN Document Server

    Weisstein, Eric W

    2003-01-01

    Upon publication, the first edition of the CRC Concise Encyclopedia of Mathematics received overwhelming accolades for its unparalleled scope, readability, and utility. It soon took its place among the top selling books in the history of Chapman & Hall/CRC, and its popularity continues unabated. Yet also unabated has been the dedication of author Eric Weisstein to collecting, cataloging, and referencing mathematical facts, formulas, and definitions. He has now updated most of the original entries and expanded the Encyclopedia to include 1000 additional pages of illustrated entries. The accessibility of the Encyclopedia along with its broad coverage and economical price make it attractive to the widest possible range of readers and certainly a must for libraries, from the secondary to the professional and research levels. For mathematical definitions, formulas, figures, tabulations, and references, this is simply the most impressive compendium available.

  8. Materials handbook: a concise desktop reference

    National Research Council Canada - National Science Library

    Cardarelli, François

    2008-01-01

    ... and extensive interest in both science and technology, and excessive consumption of scientific and technical literature. François Cardarelli Dedication for the Second Edition The Materials Handbook: A Concise Desktop Reference is dedicated to my father, Antonio, and my mother, Claudine, to my sister, Elsa, and to my wife Elizabeth I.R. Cardarelli for thei...

  9. The Concise Guide to PHARMACOLOGY 2015/16: Overview

    National Research Council Canada - National Science Library

    ...; Alexander, Stephen PH; Kelly, Eamonn; Marrion, Neil; Peters, John A; Benson, Helen E; Faccenda, Elena; Pawson, Adam J; Sharman, Joanna L; Southan, Christopher; Buneman, O Peter; Catterall, William A; Cidlowski, John A; Davenport, Anthony P; Fabbro, Doriano; Fan, Grace; McGrath, John C; Spedding, Michael; Davies, Jamie A; Aldrich, R; Attali, B; Bäck, Ml; Barnes, NM; Bathgate, R; Beart, PM; Becirovic, E; Biel, M; Birdsall, NJ; Boison, D; Bräuner‐Osborne, H; Bröer, S; Bryant, C; Burnstock, G; Burris, T; Cain, D; Calo, G; Chan, SL; Chandy, KG; Chiang, N; Christakos, S; Christopoulos, A; Chun, JJ; Chung, J‐J; Clapham, DE; Connor, MA; Coons, L; Cox, HM; Dautzenberg, FM; Dent, G; Douglas, SD; Dubocovich, ML; Edwards, DP; Farndale, R; Fong, TM; Forrest, D; Fowler, CJ; Fuller, P; Gainetdinov, RR; Gershengorn, MA; Goldin, A; Goldstein, SAN; Grimm, SL; Grissmer, S; Gundlach, AL; Hagenbuch, B; Hammond, JR; Hancox, JC; Hartig, S; Hauger, RL; Hay, DL; Hébert, T; Hollenberg, AN; Holliday, ND; Hoyer, D; Ijzerman, AP; Inui, KI; Ishii, S; Jacobson, KA; Jan, LY; Jarvis, GE; Jensen, R; Jetten, A; Jockers, R; Kaczmarek, LK; Kanai, Y; Kang, HS; Karnik, S; Kerr, ID; Korach, KS; Lange, CA; Larhammar, D; Leeb‐Lundberg, F; Leurs, R; Lolait, SJ; Macewan, D; Maguire, JJ; May, JM; Mazella, J; Mcardle, CA; Mcdonnell, DP; Michel, MC

    2015-01-01

    The Concise Guide to PHARMACOLOGY 2015/16 provides concise overviews of the key properties of over 1750 human drug targets with their pharmacology, plus links to an open access knowledgebase of drug...

  10. Concise encyclopedia of history of energy

    CERN Document Server

    2009-01-01

    "The Concise Encyclopedia of the History of Energy" draws together in a single volume a comprehensive account of the field from the prestigious and award-winning "Encyclopedia of Energy" (2004). This volume covers all aspects of energy history with authoritative articles authoritatively contributed and edited by an interdisciplinary team of experts. Extensively revised since the original publication of the "Encylopedia of Energy", this work describes the most interesting historical developments of the past five years in the energy sector. It is a concise desk reference for researchers and those interested in any aspect of the history of energy science. It provides eminently cost-effective access to some of the most interesting articles in "Encyclopedia of Energy". It is significantly revised to accommodate the latest trends in each field of enquiry.

  11. Balmer-Dominated Shocks: A Concise Review

    OpenAIRE

    Heng, Kevin

    2009-01-01

    A concise and critical review of Balmer-dominated shocks (BDSs) is presented, summarizing the state of theory and observations, including models with/without shock precursors and their synergy with atomic physics. Observations of BDSs in supernova remnants are reviewed on an object-by-object basis. The relevance of BDSs towards understanding the acceleration of cosmic rays in shocks is emphasized. Probable and possible detections of BDSs in astrophysical objects other than supernova remnants,...

  12. A Concise Contrastive Grammar of English

    DEFF Research Database (Denmark)

    Hjulmand, Lise-Lotte

    Like the first edition, this second revised edition of the workbook is intended to be used together with A Concise Contrastive Grammar of English for Danish Students, which is a systematic and pedagogical introduction to English grammar for Danish students of English at bachelor level. The purpose...... of the workbook is to supply students and teachers with material which can be used in connection with the study of grammar. The workbook is organised so that each chapter in the grammar book matches a chapter in the workbook. There are exercises of many different kinds in the workbook. Some aim at explanation...

  13. Logic and discrete mathematics a concise introduction

    CERN Document Server

    Conradie, Willem

    2015-01-01

    A concise yet rigorous introduction to logic and discrete mathematics. This book features a unique combination of comprehensive coverage of logic with a solid exposition of the most important fields of discrete mathematics, presenting material that has been tested and refined by the authors in university courses taught over more than a decade.  The chapters on logic - propositional and first-order - provide a robust toolkit for logical reasoning, emphasizing the conceptual understanding of the language and the semantics of classical logic as well as practical applications through the easy

  14. Concise Synthesis of v-Coelenterazines.

    Science.gov (United States)

    Hosoya, Takamitsu; Iimori, Rie; Yoshida, Suguru; Sumida, Yuto; Sahara-Miura, Yuiko; Sato, Jun-ichi; Inouye, Satoshi

    2015-08-07

    A novel synthetic method for v-coelenterazine (v-CTZ), which is a vinylene-bridged analog of native CTZ with a large red-shifted luminescence property, is described. The synthesis was achieved in a concise way through the use of three sequential cross-coupling reactions and ring-closing metathesis (RCM). A newly synthesized C2-modified trifluoromethyl analog cf3-v-CTZ showed slightly more red-shifted luminescence than v-CTZ when it was used as a substrate for Renilla luciferases.

  15. Basic theoretical physics a concise overview

    CERN Document Server

    Krey, Uwe

    2007-01-01

    This concise treatment embraces, in four parts, all the main aspects of theoretical physics (I . Mechanics and Basic Relativity, II. Electrodynamics and Aspects of Optics, III. Non-relativistic Quantum Mechanics, IV. Thermodynamics and Statistical Physics). It summarizes the material that every graduate student, physicist working in industry, or physics teacher should master during his or her degree course. It thus serves both as an excellent revision and preparation tool, and as a convenient reference source, covering the whole of theoretical physics. It may also be successfully employed to deepen its readers' insight and add new dimensions to their understanding of these fundamental concepts. Recent topics such as holography and quantum cryptography are included, thus making this a unique contribution to the learning material for theoretical physics.

  16. A concise guide to chaotic electronic circuits

    CERN Document Server

    Buscarino, Arturo; Frasca, Mattia; Sciuto, Gregorio

    2014-01-01

    This brief provides a source of instruction from which students can be taught about the practicalities of designing and using chaotic circuits. The text provides information on suitable materials, circuit design and schemes for design realization. Readers are then shown how to reproduce experiments on chaos and to design new ones. The text guides the reader easily from the basic idea of chaos to the laboratory test providing an experimental basis that can be developed for such applications as secure communications. This brief provides introductory information on sample chaotic circuits, includes coverage of their development, and the “gallery” section provides information on a wide range of circuits. Concise Guide to Chaotic Electronic Circuits will be useful to anyone running a laboratory class involving chaotic circuits and to students wishing to learn about them.

  17. The concise guide to pharmacology 2017/18: Overview

    NARCIS (Netherlands)

    Alexander, Stephen Ph; Kelly, Eamonn; Marrion, Neil V.; Peters, John A.; Faccenda, Elena; Harding, Simon D.; Pawson, Adam J.; Sharman, Joanna L.; Southan, Christopher; Buneman, O. Peter; Cidlowski, John A.; Christopoulos, Arthur; Davenport, Anthony P.; Fabbro, Doriano; Spedding, Michael; Striessnig, Jörg; Davies, Jamie A.; Abbracchio, M.-P.; Aldrich, R.; Al-Hosaini, K.; Arumugam, T. V.; Attali, B.; Bäck, M.; Barnes, N. M.; Bathgate, R.; Beart, P. M.; Becirovic, E.; Bettler, B.; Biel, M.; Birdsall, N. J.; Blaho, V.; Boison, D.; Bräuner-Osborne, H.; Bröer, S.; Bryant, C.; Burnstock, G.; Calo, G.; Catterall, W. A.; Ceruti, S.; Chan, S. L.; Chandy, K. G.; Chazot, P.; Chiang, N.; Chun, J. J.; Chung, J.-J.; Clapham, D. E.; Clapp, L.; Connor, M. A.; Cox, H. M.; Davies, P.; Dawson, P. A.; Decaen, P.; Dent, G.; Doherty, P.; Douglas, S. D.; Dubocovich, M. L.; Fong, T. M.; Fowler, C. J.; Frantz, A.; Fuller, P.; Fumagalli, M.; Futerman, A. H.; Gainetdinov, R. R.; Gershengorn, M. A.; Goldin, A.; Goldstein, San; Goudet, C.; Gregory, K.; Grissmer, S.; Gundlach, A. L.; Hagenbuch, B.; Hamann, Jörg; Hammond, J. R.; Hancox, J. C.; Hanson, J.; Hanukoglu, I.; Hay, D. L.; Hobbs, A. J.; Hollenberg, A. N.; Holliday, N. D.; Hoyer, D.; IJzerman, A. P.; Inui, K. I.; Irving, A. J.; Ishii, S.; Jacobson, K. A.; Jan, L. Y.; Jarvis, M. F.; Jensen, R.; Jockers, R.; Kaczmarek, L. K.; Kanai, Y.; Karnik, S.; Kellenberger, S.; Kemp, Stephan; Kennedy, C.; Kerr, I. D.; Kihara, Y.; Kukkonen, J.; Larhammar, D.; Leach, K.; Lecca, D.; Leeman, S.; Leprince, J.; Lolait, S. J.; MacEwan, D.; Maguire, J. J.; Marshall, F.; Mazella, J.; McArdle, C. A.; Michel, M. C.; Miller, L. J.; Mitolo, V.; Mizuno, H.; Monk, P. N.; Mouillac, B.; Murphy, P. M.; Nahon, J.-L.; Nerbonne, J.; Nichols, C. G.; Norel, X.; Offermanns, S.; Palmer, L. G.; Panaro, M. A.; Papapetropoulos, A.; Perez-Reyes, E.; Pertwee, R. G.; Pintor, S.; Pisegna, J. R.; Plant, L. D.; Poyner, D. R.; Prossnitz, E. R.; Pyne, S.; Ramachandran, R.; Ren, D.; Rondard, P.; Ruzza, C.; Sackin, H.; Sanger, G.; Sanguinetti, M. C.; Schild, L.; Schiöth, H.; Schulte, G.; Schulz, S.; Segaloff, D. L.; Serhan, C. N.; Singh, K. D.; Slesinger, P. A.; Snutch, T. P.; Sobey, C. G.; Stewart, G.; Stoddart, L. A.; Summers, R. J.; Szabo, C.; Thwaites, D.; Toll, L.; Trimmer, J. S.; Tucker, S.; Vaudry, H.; Verri, T.; Vilargada, J.-P.; Waldman, S. A.; Ward, D. T.; Waxman, S. G.; Wei, A. D.; Willars, G. B.; Wong, S. S.; Woodruff, T. M.; Wulff, H.; Ye, R. D.; Yung, Y.; Zajac, J.-M.

    2017-01-01

    The Concise Guide to PHARMACOLOGY 2017/18 is the third in this series of biennial publications. This version provides concise overviews of the key properties of nearly 1800 human drug targets with an emphasis on selective pharmacology (where available), plus links to an open access knowledgebase of

  18. Practical IT service management a concise guide for busy executives

    CERN Document Server

    Thejendra, BS

    2008-01-01

    Practical IT Service Management is a clear, concise and to the point guide to implementing IT service management (ITSM). It is based on ITIL Version 3, one of the most widely accepted best-practice approaches to ITSM

  19. The Dirty Dozen: A Concise Measure of the Dark Triad

    Science.gov (United States)

    Jonason, Peter K.; Webster, Gregory D.

    2010-01-01

    There has been an exponential increase of interest in the dark side of human nature during the last decade. To better understand this dark side, the authors developed and validated a concise, 12-item measure of the Dark Triad: narcissism, psychopathy, Machiavellianism. In 4 studies involving 1,085 participants, they examined its structural…

  20. Metabolic surgery: a concise overview and understanding of ...

    African Journals Online (AJOL)

    2011-09-12

    Sep 12, 2011 ... The long-term mortality rate of gastric bypass procedure. (GBP) patients is reduced by up to 40%.10,11 Currently, the general death rate from bariatric surgery seems to. Metabolic surgery: a concise overview and understanding of potential complications. Potgieter AJ, MBChB (Stell), MMed (Chir), FCS(SA).

  1. A Concise Introduction to Mechanics of Rigid Bodies Multidisciplinary Engineering

    CERN Document Server

    Huang, L

    2012-01-01

    A Concise Introduction to Mechanics of Rigid Bodies: Multidisciplinary Engineering presents concise, key concepts of kinematics and dynamics of rigid bodies. This compact volume bridges the steep gap between  introductory texts on engineering mechanics, which focus on one and two dimensional motions of particles and rigid bodies, and advanced texts on multi-body dynamics in high dimension spaces  found in multidisciplinary areas like mechatronics, robotics and biomechanics. In the book, rigid body motions in the spaces with different dimensions are described in addition to studies in a uniform framework supported by vector and matrix operations. Rigorous mathematic tools and explanations are provided to clarify the most complex concepts. This book also: Provides practical examples from different engineering areas, offering a link between theoretical fundamentals and everyday applications Offers simplified mathematical equations to clearly present essential theories in robotics and mechanics Presents statics...

  2. Concise encyclopedia of semiconducting materials and related technologies

    CERN Document Server

    Mahajan, S M

    1992-01-01

    The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layer

  3. The Concise Guide to PHARMACOLOGY 2015/16: Overview.

    Science.gov (United States)

    Alexander, Stephen Ph; Kelly, Eamonn; Marrion, Neil; Peters, John A; Benson, Helen E; Faccenda, Elena; Pawson, Adam J; Sharman, Joanna L; Southan, Christopher; Buneman, O Peter; Catterall, William A; Cidlowski, John A; Davenport, Anthony P; Fabbro, Doriano; Fan, Grace; McGrath, John C; Spedding, Michael; Davies, Jamie A

    2015-12-01

    The Concise Guide to PHARMACOLOGY 2015/16 provides concise overviews of the key properties of over 1750 human drug targets with their pharmacology, plus links to an open access knowledgebase of drug targets and their ligands (www.guidetopharmacology.org), which provides more detailed views of target and ligand properties. The full contents can be found at http://onlinelibrary.wiley.com/doi/10.1111/bph.13347/full. This compilation of the major pharmacological targets is divided into eight areas of focus: G protein-coupled receptors, ligand-gated ion channels, voltage-gated ion channels, other ion channels, nuclear hormone receptors, catalytic receptors, enzymes and transporters. These are presented with nomenclature guidance and summary information on the best available pharmacological tools, alongside key references and suggestions for further reading. The Concise Guide is published in landscape format in order to facilitate comparison of related targets. It is a condensed version of material contemporary to late 2015, which is presented in greater detail and constantly updated on the website www.guidetopharmacology.org, superseding data presented in the previous Guides to Receptors & Channels and the Concise Guide to PHARMACOLOGY 2013/14. It is produced in conjunction with NC-IUPHAR and provides the official IUPHAR classification and nomenclature for human drug targets, where appropriate. It consolidates information previously curated and displayed separately in IUPHAR-DB and GRAC and provides a permanent, citable, point-in-time record that will survive database updates. © 2015 The Authors. British Journal of Pharmacology published by John Wiley & Sons Ltd on behalf of The British Pharmacological Society.

  4. Gastrin releasing peptide (GRP) receptor targeted radiopharmaceuticals: A concise update

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.J.; Volkert, W.A.; Hoffman, T.J. E-mail: HoffmanT@health.missouri.edu

    2003-11-01

    The gastrin releasing peptide (GRP) receptor is becoming an increasingly attractive target for development of new radiolabeled peptides with diagnostic and therapeutic potential. The attractiveness of the GRP receptor as a target is based upon the functional expression of GRP receptors in several tumors of neuroendocrine origin including prostate, breast, and small cell lung cancer. This concise review outlines some of the efforts currently underway to develop new GRP receptor specific radiopharmaceuticals by employing a variety of radiometal chelation systems.

  5. Transport phenomena in Newtonian fluids a concise primer

    CERN Document Server

    Olsson, Per

    2013-01-01

    This short primer provides a concise and tutorial-style introduction to transport phenomena in Newtonian fluids , in particular the transport of mass, energy and momentum.  The reader will find detailed derivations of the transport equations for these phenomena, as well as selected analytical solutions to the transport equations in some simple geometries. After a brief introduction to the basic mathematics used in the text, Chapter 2, which deals with momentum transport, presents a derivation of the Navier-Stokes-Duhem equation describing the basic flow in a Newtonian fluid.  Also provided at

  6. Logic and discrete mathematics a concise introduction : solutions manual

    CERN Document Server

    Conradie, Willem; Robinson, Claudette

    2015-01-01

    Solutions manual to accompany Logic and Discrete Mathematics: A Concise Introduction This book features a unique combination of comprehensive coverage of logic with a solid exposition of the most important fields of discrete mathematics, presenting material that has been tested and refined by the authors in university courses taught over more than a decade. Written in a clear and reader-friendly style, each section ends with an extensive set of exercises, most of them provided with complete solutions which are available in this accompanying solutions manual.

  7. A concise introduction to image processing using C++

    CERN Document Server

    Wang, Meiqing

    2008-01-01

    Image recognition has become an increasingly dynamic field with new and emerging civil and military applications in security, exploration, and robotics. Written by experts in fractal-based image and video compression, A Concise Introduction to Image Processing using C++ strengthens your knowledge of fundamentals principles in image acquisition, conservation, processing, and manipulation, allowing you to easily apply these techniques in real-world problems. The book presents state-of-the-art image processing methodology, including current industrial practices for image compression, image de-noi

  8. The geometry of special relativity a concise course

    CERN Document Server

    Dragon, Norbert

    2012-01-01

    In this concise primer it is shown that, with simple diagrams, the phenomena of time dilatation, length contraction and Lorentz transformations can be deduced from the fact that in a vacuum one cannot distinguish physically straight and uniform motion from rest, and that the speed of light does not depend on the speed of either the source or the observer. The text proceeds to derive the important results of relativistic physics and to resolve its apparent paradoxes. A short introduction into the covariant formulation of electrodynamics is also given. This publication addresses, in particular, students of physics and mathematics in their final undergraduate year.

  9. A Concise Introduction to Multiagent Systems and Distributed Artificial Intelligence

    CERN Document Server

    Vlassis, Nikos

    2007-01-01

    Multiagent systems is an expanding field that blends classical fields like game theory and decentralized control with modern fields like computer science and machine learning. This monograph provides a concise introduction to the subject, covering the theoretical foundations as well as more recent developments in a coherent and readable manner. The text is centered on the concept of an agent as decision maker. Chapter 1 is a short introduction to the field of multiagent systems. Chapter 2 covers the basic theory of singleagent decision making under uncertainty. Chapter 3 is a brief introductio

  10. The Concise Guide to Pharmacology 2013/14: Overview

    Science.gov (United States)

    Alexander, Stephen PH; Benson, Helen E; Faccenda, Elena; Pawson, Adam J; Sharman, Joanna L; McGrath, John C; Catterall, William A; Spedding, Michael; Peters, John A; Harmar, Anthony J

    2013-01-01

    The Concise Guide to PHARMACOLOGY 2013/14 provides concise overviews of the key properties of over 2000 human drug targets with their pharmacology, plus links to an open access knowledgebase of drug targets and their ligands (www.guidetopharmacology.org), which provides more detailed views of target and ligand properties from the IUPHAR database. The full contents can be found at http://onlinelibrary.wiley.com/doi/10.1111/bph.12444/full. This compilation of the major pharmacological targets is divided into seven areas of focus: G protein-coupled receptors, ligand-gated ion channels, ion channels, catalytic receptors, nuclear hormone receptors, transporters and enzymes. These are presented with nomenclature guidance and summary information on the best available pharmacological tools, alongside key references and suggestions for further reading. A new landscape format has easy to use tables comparing related targets. It is a condensed version of material contemporary to late 2013, which is presented in greater detail and constantly updated on the website www.guidetopharmacology.org, superseding data presented in previous Guides to Receptors & Channels. It is produced in conjunction with NC-IUPHAR and provides the official IUPHAR classification and nomenclature for human drug targets, where appropriate. It consolidates information previously curated and displayed separately in IUPHAR-DB and GRAC and provides a permanent, citable, point-in-time record that will survive database updates. PMID:24528237

  11. Nuclear Scans

    Science.gov (United States)

    Nuclear scans use radioactive substances to see structures and functions inside your body. They use a special ... images. Most scans take 20 to 45 minutes. Nuclear scans can help doctors diagnose many conditions, including ...

  12. Quantum spin systems on infinite lattices a concise introduction

    CERN Document Server

    Naaijkens, Pieter

    2017-01-01

    This course-based primer offers readers a concise introduction to the description of quantum mechanical systems with infinitely many degrees of freedom – and quantum spin systems in particular – using the operator algebraic approach. Here, the observables are modeled using elements of some operator algebra, usually a C*-algebra. This text introduces readers to the framework and the necessary mathematical tools without assuming much mathematical background, making it more accessible than advanced monographs. The book also highlights the usefulness of the so-called thermodynamic limit of quantum spin systems, which is the limit of infinite system size. For example, this makes it possible to clearly distinguish between local and global properties, without having to keep track of the system size. Together with Lieb-Robinson bounds, which play a similar role in quantum spin systems to that of the speed of light in relativistic theories, this approach allows ideas from relativistic field theories to be implemen...

  13. Extraintestinal manifestations of Helicobacter pylori: A concise review

    Science.gov (United States)

    Wong, Frank; Rayner-Hartley, Erin; Byrne, Michael F

    2014-01-01

    Helicobacter pylori (H. pylori) infection has been clearly linked to peptic ulcer disease and some gastrointestinal malignancies. Increasing evidence demonstrates possible associations to disease states in other organ systems, known as the extraintestinal manifestations of H. pylori. Different conditions associated with H. pylori infection include those from hematologic, cardiopulmonary, metabolic, neurologic, and dermatologic systems. The aim of this article is to provide a concise review of the evidence that supports or refutes the associations of H. pylori and its proposed extraintestinal manifestations. Based on data from the literature, PUD, mucosal associated lymphoid tumors lymphoma, and gastric adenocarcinoma has well-established links. Current evidence most supports extraintestinal manifestations with H. pylori in immune thrombocytopenic purpura, iron deficiency anemia, urticaria, Parkinson’s, migraines and rosacea; however, there is still plausible link with other diseases that requires further research. PMID:25232230

  14. Continuum mechanics through the twentieth century a concise historical perspective

    CERN Document Server

    Maugin, Gerard A

    2013-01-01

    This overview of the development of continuum mechanics throughout the twentieth century is unique and ambitious. Utilizing a historical perspective, it combines an exposition on the technical progress made in the field and a marked interest in the role played by remarkable individuals and scientific schools and institutions on a rapidly evolving social background. It underlines the newly raised technical questions and their answers, and the ongoing reflections on the bases of continuum mechanics associated, or in competition, with other branches of the physical sciences, including thermodynamics. The emphasis is placed on the development of a more realistic modeling of deformable solids and the exploitation of new mathematical tools. The book presents a balanced appraisal of advances made in various parts of the world. The author contributes his technical expertise, personal recollections, and international experience to this general overview, which is very informative albeit concise.

  15. A concise quantum efficiency measurement system for gaseous photomultipliers

    Energy Technology Data Exchange (ETDEWEB)

    Moriya, Toru [Department of Physics, Yamagata University, Yamagata 990-8560 (Japan); Tokanai, Fuyuki, E-mail: tokanai@sci.kj.yamagata-u.ac.jp [Department of Physics, Yamagata University, Yamagata 990-8560 (Japan); Okazaki, Keisuke; Sakurai, Hirohisa; Gunji, Shuichi [Department of Physics, Yamagata University, Yamagata 990-8560 (Japan); Kawabata, Hironobu; Sohtome, Takayuki [BUNKOUKEIKI Co., Ltd., Hachioji, Tokyo 192-0033 (Japan); Sumiyoshi, Takayuki [Graduate School of the Faculty of Science and Engineering, Tokyo Metropolitan University, Tokyo 192-0397 (Japan); Sugiyama, Hirioyuki; Okada, Teruyuki; Ohishi, Noboru [Electron Tube Division, Hamamatsu Photonics K.K., Shizuoka 438-0193 (Japan); Kishimoto, Syunji [Institute of Material Structure Science, KEK, Tsukuba 305-0801 (Japan)

    2013-12-21

    We have been developing gaseous photomultiplier tubes (PMTs) with a bialkali photocathode combined with micropattern gas detectors (MPGDs). The sensitivity of a PMT is described in terms of its quantum efficiency (QE). The QE is very important in many experiments, particularly when dealing with low photon statistics. A concise QE measurement system has been developed to evaluate the characteristics of a sealed gaseous PMT with a bialkali photocathode. This QE measurement system consists of a Xe arc lamp source, reflective optics and filters, a monochromator, and a reference Si photodiode detector. Using the system, we evaluated the QE, gain, and long-term stability of the gaseous PMT. Here, we report the results of our evaluation.

  16. A Concise Introduction to the Statistical Physics of Complex Systems

    CERN Document Server

    Bertin, Eric

    2012-01-01

    This concise primer (based on lectures given at summer schools on complex systems and on a masters degree course in complex systems modeling) will provide graduate students and newcomers to the field with the basic knowledge of the concepts and methods of statistical physics and its potential for application to interdisciplinary topics.  Indeed, in recent years, statistical physics has begun to attract the interest of a broad community of researchers in the field of complex system sciences, ranging from biology to the social sciences, economics and computer science. More generally, a growing number of graduate students and researchers feel the need to learn some basic concepts and questions originating in other disciplines without necessarily having to master all of the corresponding technicalities and jargon. Generally speaking, the goals of statistical physics may be summarized as follows: on the one hand to study systems composed of a large number of interacting ‘entities’, and on the other to predict...

  17. Renal scan

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003790.htm Renal scan To use the sharing features on this ... anaphylaxis . Alternative Names Renogram; Kidney scan Images Kidney anatomy Kidney - blood and urine flow References Chernecky CC, ...

  18. Concise Synthesis of (2R,4R)-Monatin.

    Science.gov (United States)

    Amino, Yusuke

    2016-01-01

    Monatin, 4-hydroxy-4-(3-indolylmethyl)-glutamic acid, is a naturally occurring sweet amino acid. The (2R,4R)-monatin isomer has been found to be the sweetest among its four stereoisomers. A concise and efficient synthesis of (2R,4R)-monatin was accomplished by the alkylation of (4R)-N-tert-butoxycarbonyl (tBoc)-4-tert-butyldimethylsilyoxy-D-pyroglutamic acid methyl ester with tert-butyl 3-(bromomethyl)-1H-indole-1-carboxylate to give (4R)-N-tBoc-4-tert-butyldimethylsilyloxy-4-(N-tBoc-3-indolylmethyl)-D-pyroglutamic acid methyl ester, i.e., the lactam form of (2R,4R)-monatin with protecting groups. This was followed by the hydrolysis of the lactam ring and deprotection. The 4-hydroxyl D-pyroglutamic acid derivative was demonstrated to be a suitable precursor for the efficient preparation of (2R,4R)-monatin in high optical purity because the alkylation proceeded in regioselective and stereoselective manners at C4 to form appropriate asymmetric tetra-substituted carbon center; the resulting alkylated pyroglutamic acid derivative was then easily converted into the linear form of monatin.

  19. Cooperative scans

    NARCIS (Netherlands)

    M. Zukowski (Marcin); P.A. Boncz (Peter); M.L. Kersten (Martin)

    2004-01-01

    textabstractData mining, information retrieval and other application areas exhibit a query load with multiple concurrent queries touching a large fraction of a relation. This leads to individual query plans based on a table scan or large index scan. The implementation of this access path in most

  20. Economic Evaluation of Concise Cognitive Behavioural Therapy and/or Pharmacotherapy for Depressive and Anxiety Disorders.

    Science.gov (United States)

    Meuldijk, Denise; Carlier, Ingrid V E; van Vliet, Irene M; van Hemert, Albert M; Zitman, Frans G; van den Akker-van Marle, M Elske

    2015-12-01

    Depressive and anxiety disorders cause great suffering and disability and are associated with high health care costs. In a previous conducted pragmatic randomised controlled trial, we have shown that a concise format of cognitive behavioural- and/or pharmacotherapy is as effective as standard care in reducing depressive and anxiety symptoms and in improving subdomains of general health and quality of life in secondary care psychiatric outpatients. In this economic evaluation, we examined whether a favourable cost-utility of concise care compared to standard care was attained. The economic evaluation was performed alongside a pragmatic randomised controlled trial. Health-related quality of life was measured using the Short-Form (SF-36) questionnaire. Cost of healthcare utilization and productivity loss (absenteeism and presenteeism) were assessed using the Trimbos/iMTA questionnaire for Costs associated with Psychiatric Illness (TiC-P). A cost-utility analysis, using cost-effectiveness acceptability curves, comparing differences in societal costs and Quality-Adjusted Life Years (QALYs) at 1 year was performed. One year after study entry, the difference in mean cost per patient of the two primary treatments was not significant between both groups. No significant differences in other healthcare and non- healthcare costs could be detected between patients receiving concise care and standard care. Also, QALYs were not statistically different between the groups during the study period. From both the societal and healthcare perspective, the probability that concise care is more cost-effective compared to standard care remains below the turning point of 0.5 for all acceptable values of the willingness to pay for a QALY. The economic evaluation suggests that concise care is unlikely to be cost-effective compared to standard care in the treatment for depressive- and anxiety disorders in secondary mental health care during a one year follow up period. Total costs and QALYs

  1. MRI Scans

    Science.gov (United States)

    Magnetic resonance imaging (MRI) uses a large magnet and radio waves to look at organs and structures inside your body. Health care professionals use MRI scans to diagnose a variety of conditions, from ...

  2. Bone Scan

    Science.gov (United States)

    ... posts Join Mayo Clinic Connect Bone scan About Advertisement Mayo Clinic does not endorse companies or products. ... a Job Site Map About This Site Twitter Facebook Google YouTube Pinterest Mayo Clinic is a not- ...

  3. Scanning table

    CERN Multimedia

    1960-01-01

    Before the invention of wire chambers, particles tracks were analysed on scanning tables like this one. Today, the process is electronic and much faster. Bubble chamber film - currently available - (links can be found below) was used for this analysis of the particle tracks.

  4. Scan Statistics

    CERN Document Server

    Glaz, Joseph

    2009-01-01

    Suitable for graduate students and researchers in applied probability and statistics, as well as for scientists in biology, computer science, pharmaceutical science and medicine, this title brings together a collection of chapters illustrating the depth and diversity of theory, methods and applications in the area of scan statistics.

  5. Quantum Mechanics A Modern and Concise Introductory Course

    CERN Document Server

    Bes, Daniel R

    2007-01-01

    Starting from basic principles, the book systematically covers both Heisenberg and Schrödinger realizations of quantum mechanics (in this order). The material traditionally presented in quantum textbooks is illustrated with applications which are (or will become) cornestones of future technologies. The emphasis in the matrix formulation focus the atention on the spin, the most important quantum observable, and paves the way to chapters on quantum information (including crytography, teleportation and computation), on recent tests of quantum physics and on decoherence. Additions and changes found in the second edition include; a more friendly presentation to Hilbert spaces; more practical applications e.g. scanning tunneling microscope (potential barrier); quantum dots (single-particle states in semiconductors); lasers and masers (induced emission); real experiments that have recently provided a qualitative change in the foundations of quantum physics; and an outline of the density matrix formalism as applied ...

  6. Saying more with less? Disclosure conciseness, completeness and balance in Integrated Reports

    NARCIS (Netherlands)

    G. Melloni (Gaia); A. Caglio (Ariela); P.M. Perego (Paolo)

    2017-01-01

    textabstractThe Integrated Reporting Framework of 2013 represents the latest international attempt to connect a firm's financial and sustainability (i.e., environmental, social and governance) performance in one company report. An Integrated Report (IR) should communicate "concisely" about how a

  7. Concise enantioselective synthesis of duloxetine via direct catalytic asymmetric aldol reaction of thioamide.

    Science.gov (United States)

    Suzuki, Yuta; Iwata, Mitsutaka; Yazaki, Ryo; Kumagai, Naoya; Shibasaki, Masakatsu

    2012-05-04

    Direct catalytic asymmetric aldol reaction of thioamide offers a new entry to the concise enantioselective synthesis of duloxetine. The direct aldol protocol was scalable (>20 g) to afford the aldol product in 92% ee after LiAlH(4) reduction, and 84% of the chiral ligand was recovered after recrystallization. The following four steps of transformation delivered duloxetine.

  8. 22 CFR 216.9 - Bilateral and multilateral studies and concise reviews of environmental issues.

    Science.gov (United States)

    2010-04-01

    ... reviews of environmental issues. 216.9 Section 216.9 Foreign Relations AGENCY FOR INTERNATIONAL... environmental issues. Notwithstanding anything to the contrary in these procedures, the Administrator may... United States is a member or participant; or (b) Concise reviews of the environmental issues involved...

  9. Vinyl quinones as Diels-Alder dienes: concise synthesis of (-)-halenaquinone.

    Science.gov (United States)

    Kienzler, Michael A; Suseno, Sandy; Trauner, Dirk

    2008-07-09

    A concise asymmetric synthesis of (-)-halenaquinone is described. The synthesis features a diastereoselective Heck cyclization to set a quaternary center as well as a novel intramolecular inverse-electron-demand Diels-Alder reaction involving a vinyl quinone. The synthesis is highly convergent and features a minimal amount of protecting group manipulations.

  10. Concise large-scale synthesis of psilocin and psilocybin, principal hallucinogenic constituents of "magic mushroom".

    Science.gov (United States)

    Shirota, Osamu; Hakamata, Wataru; Goda, Yukihiro

    2003-06-01

    The concise large-scale syntheses of psilocin (1) and psilocybin (2), the principal hallucinogenic constituents of "magic mushroom", were achieved without chromatographic purification. The key step in the synthesis of 2 was the isolation of the dibenzyl-protected intermediate (7) as a zwitterionic derivative (8), which was completely identified by means of 2D NMR analyses.

  11. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake Thyroid scan and uptake uses ... the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is a ...

  12. Thyroid Scan and Uptake

    Science.gov (United States)

    ... News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake Thyroid scan and uptake uses ... the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is a ...

  13. Concise Neural Nonaffine Control of Air-Breathing Hypersonic Vehicles Subject to Parametric Uncertainties

    Directory of Open Access Journals (Sweden)

    Xiangwei Bu

    2017-01-01

    Full Text Available In this paper, a novel simplified neural control strategy is proposed for the longitudinal dynamics of an air-breathing hypersonic vehicle (AHV directly using nonaffine models instead of affine ones. For the velocity dynamics, an adaptive neural controller is devised based on a minimal-learning parameter (MLP technique for the sake of decreasing computational loads. The altitude dynamics is rewritten as a pure feedback nonaffine formulation, for which a novel concise neural control approach is achieved without backstepping. The special contributions are that the control architecture is concise and the computational cost is low. Moreover, the exploited controller possesses good practicability since there is no need for affine models. The semiglobally uniformly ultimate boundedness of all the closed-loop system signals is guaranteed via Lyapunov stability theory. Finally, simulation results are presented to validate the effectiveness of the investigated control methodology in the presence of parametric uncertainties.

  14. A concise guide to effective management of the public works equipment fleet

    OpenAIRE

    De Armas, Vicente.

    1996-01-01

    CIVINS (Civilian Institutions) Thesis document Approved for public release ; distribution is unlimited The purpose of this report is to present in a concise form the principles and fundamentals of managing the public works equipment fleet, providing a basis from which to develop an effective fleet management program. The report begins with a review of today's trends in fleet management, including, organization, privatization, effects of environmental regulations and a discussion on info...

  15. A concise drug alerting rule set for Chinese hospitals and its application in computerized physician order entry (CPOE)

    OpenAIRE

    ZHANG, Yinsheng; Long, Xin; Chen, Weihong; Li,Haomin; Duan, Huilong; Shang, Qian

    2016-01-01

    Background A minimized and concise drug alerting rule set can be effective in reducing alert fatigue. Objectives This study aims to develop and evaluate a concise drug alerting rule set for Chinese hospitals. The rule set covers not only western medicine, but also Chinese patent medicine that is widely used in Chinese hospitals. Setting A 2600-bed general hospital in China. Methods In order to implement the drug rule set in clinical information settings, an information model for drug rules wa...

  16. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... limitations of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... top of page What are some common uses of the procedure? The thyroid scan is used to ...

  17. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... of page What are some common uses of the procedure? The thyroid scan is used to determine ...

  18. Lumbar spine CT scan

    Science.gov (United States)

    CAT scan - lumbar spine; Computed axial tomography scan - lumbar spine; Computed tomography scan - lumbar spine; CT - lower ... The lumbar CT scan is good for evaluating large herniated disks, ... smaller ones. This test can be combined with a myelogram to get ...

  19. Arm CT scan

    Science.gov (United States)

    CAT scan - arm; Computed axial tomography scan - arm; Computed tomography scan - arm; CT scan - arm ... stopping.) A computer creates separate images of the arm area, called slices. These images can be stored, ...

  20. Thoracic spine CT scan

    Science.gov (United States)

    CAT scan - thoracic spine; Computed axial tomography scan - thoracic spine; Computed tomography scan - thoracic spine; CT scan - ... Philadelphia, PA: Elsevier Mosby; 2013:chap 44. US Food and Drug Administration. Computed tomography (CT). Updated August ...

  1. Concise Review

    DEFF Research Database (Denmark)

    Rumman, Mohammad; Dhawan, Jyotsna; Kassem, Moustapha

    2015-01-01

    Adult stem cells (ASCs) are tissue resident stem cells responsible for tissue homeostasis and regeneration following injury. In uninjured tissues, ASCs exist in a nonproliferating, reversibly cell cycle-arrested state known as quiescence or G0. A key function of the quiescent state is to preserve...... of this review is to provide an update regarding the biological mechanisms of ASC quiescence and their role in tissue regeneration....

  2. Concise Review

    DEFF Research Database (Denmark)

    Osorio, M Joana; Rowitch, David H; Tesar, Paul

    2017-01-01

    therapy. Yet as relatively pure CNS hypomyelinating disorders, with limited involvement of the PNS and relatively little attendant neuronal pathology, PMD and similar hypomyelinating disorders are attractive therapeutic targets for neural stem cell and glial progenitor cell transplantation, efforts...

  3. Concise Review

    DEFF Research Database (Denmark)

    Toyserkani, Navid Mohamadpour; Jørgensen, Mads Gustaf; Tabatabaeifar, Siavosh

    2017-01-01

    review all clinical studies using adipose-derived cell therapy to identify reported adverse events with a special focus on risk of thromboembolic, immunological and oncological safety concerns. Our systematic search resulted in 70 included studies involving more than 1,400 patients that were treated....... Adipose-derived cell therapy has so far shown a favourable safety profile, but safety assessment description has, in general, been of poor quality, and only adverse events that are looked for will be found. We encourage future studies to maintain a strong focus on the safety profile of cell therapy, so...

  4. Concise review

    DEFF Research Database (Denmark)

    Dawson, Jonathan I; Kanczler, Janos; Tare, Rahul

    2014-01-01

    of diseases associated with an increasingly aged population. This review describes the state of the field and current steps to translate and apply skeletal stem cell biology in the clinic and the problems therein. Challenges are described along with key strategies including the isolation and ex vivo expansion...

  5. Dopant profiling with the scanning electron microscope

    CERN Document Server

    Elliott, S L

    2001-01-01

    This dissertation is a detailed study of dopant profiling with the scanning electron microscope (SEM) using secondary electrons. The technique has been applied to a wide variety of doped silicon, gallium arsenide and gallium nitride semiconductor test structures as well as a metal-oxide field effect transistor and several light emitting diodes. A concise set of guide-lines are provided for users of this technique, including the optimum SEM operating conditions that should be used for maximum contrast, an image manipulation procedure, and the resolution and sensitivity limits that can be expected. Dopant contrast observed with the SEM has been studied over the past few years by a number of researchers, and a theory for the contrast has evolved. This theory considers the patch fields outside the specimen to be the dominant factor determining the secondary electron intensity. In this dissertation the contrast mechanism has been further investigated by examining the contrast at different temperatures and after su...

  6. Total synthesis of (-)-brevenal: a concise synthetic entry to the pentacyclic polyether core.

    Science.gov (United States)

    Ebine, Makoto; Fuwa, Haruhiko; Sasaki, Makoto

    2008-06-05

    Total synthesis of (-)-brevenal, a novel marine polycyclic ether natural product, is described. Highly efficient and scalable entries to the AB-ring exo-olefin and the DE-ring enol phosphate and a rapid construction of the C-ring by means of our Suzuki-Miyaura coupling-based strategy realized a concise synthesis of the pentacyclic skeleton of (-)-brevenal. The present synthesis is considerably more efficient than our previous synthesis (longest linear sequence: 50 steps from 2-deoxy-d-ribose).

  7. Brain PET scan

    Science.gov (United States)

    ... have false results on a PET scan. Blood sugar or insulin levels may affect the test results in people with diabetes . PET scans may be done along with a CT scan. This combination scan is called a PET/CT. Alternative Names Brain positron emission tomography; PET scan - brain References Chernecky ...

  8. Coronary Calcium Scan

    Science.gov (United States)

    ... Back To Health Topics / Coronary Calcium Scan Coronary Calcium Scan Also known as Calcium Scan Test A coronary calcium scan is a CT scan of your heart that detects and measures the amount of calcium in the walls of your coronary arteries. Overview ...

  9. The Concise Guide to Pharmacology 2013/14: G Protein-Coupled Receptors

    Science.gov (United States)

    Alexander, Stephen PH; Benson, Helen E; Faccenda, Elena; Pawson, Adam J; Sharman, Joanna L; Spedding, Michael; Peters, John A; Harmar, Anthony J

    2013-01-01

    The Concise Guide to PHARMACOLOGY 2013/14 provides concise overviews of the key properties of over 2000 human drug targets with their pharmacology, plus links to an open access knowledgebase of drug targets and their ligands (www.guidetopharmacology.org), which provides more detailed views of target and ligand properties. The full contents can be found at http://onlinelibrary.wiley.com/doi/10.1111/bph.12444/full. G protein-coupled receptors are one of the seven major pharmacological targets into which the Guide is divided, with the others being G protein-coupled receptors, ligand-gated ion channels, ion channels, catalytic receptors, nuclear hormone receptors, transporters and enzymes. These are presented with nomenclature guidance and summary information on the best available pharmacological tools, alongside key references and suggestions for further reading. A new landscape format has easy to use tables comparing related targets. It is a condensed version of material contemporary to late 2013, which is presented in greater detail and constantly updated on the website www.guidetopharmacology.org, superseding data presented in previous Guides to Receptors and Channels. It is produced in conjunction with NC-IUPHAR and provides the official IUPHAR classification and nomenclature for human drug targets, where appropriate. It consolidates information previously curated and displayed separately in IUPHAR-DB and the Guide to Receptors and Channels, providing a permanent, citable, point-in-time record that will survive database updates. PMID:24517644

  10. Concise informed consent to increase data and biospecimen access may accelerate innovative Alzheimer's disease treatments.

    Science.gov (United States)

    Hake, Ann M; Dacks, Penny A; Arnerić, Stephen P

    2017-11-01

    Informed consent forms that restrict the distribution of data and samples have been an impediment to advancing Alzheimer's disease (AD) understandings and treatments. The Coalition Against Major Disease public-private partnership developed concise addenda to responsibly broaden data access of informed consent forms. Coalition Against Major Disease members identified key elements for ensuring data and biospecimen access, and patient privacy protection according to applicable US law. Collaboration with the Alzheimer's Association established the understandability and relevance of the addenda with AD patients and Care Partners. Two key findings are (1) patients with dementia and Care Partners were shocked that their data and samples are not broadly shared and (2) with diverse feedback, two concise addenda were created to enable data and sample sharing both within and outside future sponsored studies (see Boxes). Increasing the access of valuable anonymized patient-level clinical trial data has the potential to inform the foundational and regulatory science required to deliver innovative treatments for AD.

  11. A concise rehabilitation protocol for sub-acute and chronic non-specific neck pain.

    Science.gov (United States)

    Noormohammadpour, Pardis; Tayyebi, Fereshte; Mansournia, Mohammad Ali; Sharafi, Elham; Kordi, Ramin

    2017-07-01

    There is increasing evidence in support of multidisciplinary approaches for management of chronic neck pain. Although presence of different team members is one of the strengths of these approaches, it can limit the access to these treatments. The main objective of this study is designing and investigating the efficacy of a concise rehabilitation program. Thirty-nine patients with sub-acute and chronic non-specific neck pain underwent an 8-week rehabilitation program. Baseline and 8 weeks' follow-up data regarding neck pain (visual analog scale, neck disability index and quality of life) were compared using paired T test. After eight weeks of study, pain and disability significantly decreased: -3.8 of 10 (95% CI: -4.6 to -3.0) (p-value < 0.001) for pain and -18.4 of 100 (95% CI: -23.7 to -13.2) (p-value < 0.001) for disability. Also, all SF-36 domain scales improved significantly. By using this concise rehabilitation approach, pain, disability, and quality of life improved significantly in patients with sub-acute and chronic non-specific neck pain. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Unique and concise system translation matrices for evaluating optical aberration variations.

    Science.gov (United States)

    Chen, Chaohsien

    2017-08-01

    New unique and concise translation matrices are derived for evaluating the aberration variations of conceptual and real lenses when the paraxial marginal and chief ray paths are arbitrarily changed. They are helpful in investigating the general behaviors of lenses and optimizing the balanced aberrations of lens components in prime and zoom lenses. These new matrices, with a dimension of 9×9 for monochromatic aberrations and a dimension of 4×4 for chromatic aberrations, are derived based on our earlier algorithms of which four cases with distinct translation factors and matrices are required according to the relationships of the original and new positions of the object and pupil; otherwise, division-by-zero errors or insufficient numerical accuracy will be encountered. As a comparison, the new matrices have several advantages. First, by introducing four meaningful equivalent optical invariants, multiplying the old matrices, and simplifying the new matrices, they have concise expressions to significantly reduce the calculation time. Second, they are unique and always accurate to apply for all kinds of object and pupil positions without suffering any mathematical problems, i.e., four separated algorithms are no longer necessary. Third, due to the unique property, the component contributions of original aberrations to new aberrations can be directly evaluated and analyzed.

  13. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... code: Phone no: Thank you! Do you have a personal story about radiology? Share your patient story ...

  14. Heart PET scan

    Science.gov (United States)

    ... nuclear medicine scan; Heart positron emission tomography; Myocardial PET scan ... A PET scan requires a small amount of radioactive material (tracer). This tracer is given through a vein (IV), ...

  15. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... taking our brief survey: Survey Do you have a personal story about radiology? Share your patient story ...

  16. Concise synthesis of the A/BCD-ring fragment of gambieric acid A

    Science.gov (United States)

    Fuwa, Haruhiko; Fukazawa, Ryo; Sasaki, Makoto

    2014-12-01

    Gambieric acid A (GAA) and its congeners belong to the family of marine polycyclic ether natural products. Their highly complex molecular architecture and unique biological activities have been of intense interest within the synthetic community. We have previously reported the first total synthesis, stereochemical reassignment, and preliminary structure-activity relationships of GAA. Here we disclose a concise synthesis of the A/BCD-ring fragment of GAA. The synthesis started from our previously reported synthetic intermediate that represents the A/B-ring. The C-ring was synthesized via an oxiranyl anion coupling and a 6-endo cyclization, and the D-ring was forged by means of an oxidative lactonization and subsequent palladium-catalyzed functionalization of the lactone ring. In this manner, the number of linear synthetic steps required for the construction of the C- and D-rings was reduced from 22 to 11.

  17. Granulocyte Colony-Stimulating Factor in the Treatment of Acute Radiation Syndrome: A Concise Review

    Directory of Open Access Journals (Sweden)

    Michal Hofer

    2014-04-01

    Full Text Available This article concisely summarizes data on the action of one of the principal and best known growth factors, the granulocyte colony-stimulating factor (G-CSF, in a mammalian organism exposed to radiation doses inducing acute radiation syndrome. Highlighted are the topics of its real or anticipated use in radiation accident victims, the timing of its administration, the possibilities of combining G-CSF with other drugs, the ability of other agents to stimulate endogenous G-CSF production, as well as of the capability of this growth factor to ameliorate not only the bone marrow radiation syndrome but also the gastrointestinal radiation syndrome. G-CSF is one of the pivotal drugs in the treatment of radiation accident victims and its employment in this indication can be expected to remain or even grow in the future.

  18. Concise review: Current concepts in bone marrow microenvironmental regulation of hematopoietic stem and progenitor cells.

    Science.gov (United States)

    Smith, Julianne N P; Calvi, Laura M

    2013-06-01

    Hematopoietic stem cell (HSC) behavior is governed in large part by interactions of the blood system with the bone microenvironment. Increasing evidence demonstrates the profound role the local HSC microenvironment or niche plays in normal stem cell function, in therapeutic activation and in the setting of malignancy. A number of cellular and molecular components of the microenvironment have been identified thus far, several of which are likely to provide exciting therapeutic targets in the near future. Clinically effective strategies for niche manipulation, however, require careful study of the interaction of these niche components. Some of the key findings defining these regulatory interactions are explored in this concise review, with special emphasis on potential translational applications. Copyright © 2013 AlphaMed Press.

  19. Concise dictionary of engineering a guide to the language of engineering

    CERN Document Server

    Hanifan, Ron

    2014-01-01

    This reference defines the principle and most commonly used terms found in engineering documents and drawings across multiple disciplines and explains them in plain, unambiguous English. Concise Dictionary of Engineering: A Guide to the Language of Engineering also distinguishes how some terms take on different meanings in different engineering contexts—critical knowledge when working on collaborative projects with diverse elements and colleagues. Based on an edition developed for researchers and technicians at Lockheed Martin, each entry in this volume is written in clear, everyday English without confusing jargon and “techno-speak.” The book is ideal for students, professional engineers, industrial personnel, managers, and anyone else who requires a solid understanding of the language of engineers. This dictionary also: ·         Clarifies technical terms often intermixed or misused ·         Spans a range of engineering disciplines, including mechanical, electrical, materials, and c...

  20. Concise synthesis of the A/BCD-ring fragment of gambieric acid A

    Directory of Open Access Journals (Sweden)

    Haruhiko eFuwa

    2015-01-01

    Full Text Available Gambieric acid A (GAA and its congeners belong to the family of marine polycyclic ether natural products. Their highly complex molecular architecture and unique biological activities have been of intense interest within the synthetic community. We have previously reported the first total synthesis, stereochemical reassignment, and preliminary structure–activity relationships of GAA. Here we disclose a concise synthesis of the A/BCD-ring fragment of GAA. The synthesis started from our previously reported synthetic intermediate that represents the A/B-ring. The C-ring was synthesized via an oxiranyl anion coupling and a 6-endo cyclization, and the D-ring was forged by means of an oxidative lactonization and subsequent palladium-catalyzed functionalization of the lactone ring. In this manner, the number of linear synthetic steps required for the construction of the C- and D-rings was reduced from 22 to 11.

  1. A concise course on the theory of classical liquids basics and selected topics

    CERN Document Server

    Santos, Andrés

    2016-01-01

    This short primer offers non-specialist readers a concise, yet comprehensive introduction to the field of classical fluids – providing both fundamental information and a number of selected topics to bridge the gap between the basics and ongoing research. In particular, hard-sphere systems represent a favorite playground in statistical mechanics, both in and out of equilibrium, as they represent the simplest models of many-body systems of interacting particles, and at higher temperature and densities they have proven to be very useful as reference systems for real fluids. Moreover, their usefulness in the realm of soft condensed matter has become increasingly recognized – for instance, the effective interaction among (sterically stabilized) colloidal particles can be tuned to almost perfectly match the hard-sphere model. These lecture notes present a brief, self-contained overview of equilibrium statistical mechanics of classical fluids, with special applications to both the structural and thermodynamic pr...

  2. A concise biogas plant construction suitable for Ghana and other tropical countries

    Energy Technology Data Exchange (ETDEWEB)

    Gbagbo, J.K.N.

    1997-04-01

    This report is intended to be used by people in the field of biogas for workshops, technicians, teachers to educate as well as to carry out hands on constructions in Ghana and other tropical countries. Chapter 1, discusses the biogas technology, what a biogas plant is, and how it functions. Chapter 2, describes the entire process. Chapter 3, discusses the necessary conditions for fermentation. Chapter 4, the measuring parameters for monitoring the system. Chapter 5, describes the various types of biogas plants suitable for tropical countries. Chapter 6, describes a planning guide for Ghana and other tropical countries. Chapter 7, discusses digester sizing and finally, Chapter 8, describes a concise biogas plant construction suitable for the rural areas of Ghana and other tropical countries. (au)

  3. The Eastern Scheldt Survey : A concise overview of the estuary pre- and post barrier - Part 2: SURVEY

    NARCIS (Netherlands)

    Brand, A.D.; Kothuis, B.L.M.; van Prooijen, B.C.

    The aim of this survey is to give a concise overview of the pre- and post-barrier functioning of the Eastern Scheldt estuary. The survey builds upon the Eastern Scheldt Memo (dated March 2016), which explored possible sources and shortlisted leading publications, key institutes and contacts. In

  4. The Eastern Scheldt Survey : A concise overview of the estuary pre- and post barrier - Part 1: MEMO

    NARCIS (Netherlands)

    Brand, A.D.; Kothuis, B.L.M.; van Prooijen, B.C.

    The aim of this survey is to give a concise overview of the pre- and post-barrier functioning of the Eastern Scheldt estuary. The survey builds upon the Eastern Scheldt Memo (dated March 2016), which explored possible sources and shortlisted leading publications, key institutes and contacts. In

  5. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... concern for you. If you had an intravenous line inserted for the procedure, it will usually be ... procedure that same day that requires an intravenous line. Actual scanning time for a thyroid scan is ...

  6. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... the limitations of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid ... body converts food to energy. top of page What are some common uses of the procedure? The ...

  7. RBC nuclear scan

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003835.htm RBC nuclear scan To use the sharing features on this page, please enable JavaScript. An RBC nuclear scan uses small amounts of radioactive material to ...

  8. Concise set of files for smooth return to work in employees with mental disorders.

    Science.gov (United States)

    Yoshitsugu, Kiyoshi; Kuroda, Yuko; Hiroyama, Yuji; Nagano, Nobuhisa

    2013-01-01

    Sick leave due to mental disorders is a societal problem. It carries a high cost in terms of loss of labor productivity and absenteeism. Partial remission increases the risk of relapse after a return to work. There is sometimes a difference between the ability to return to work as judged by a general practitioner (GP) and the needs of the workplace. GPs are the main controllers of treatment and tend to protect their patients. Communication and agreement by GPs and occupational physicians play an effective role in the return to work. However, it requires considerable effort for both of them to make time to do this. We have developed a concise set of files for a smooth return to work. The files consist of three parts: "Suggestions for corresponding with employees taking sick leave"; "Checklist for smooth return to work"; and "Pattern of living". We put them into practice among 20 companies in Japan from January 2012 to October 2013. The companies had 8244 workers in total and 116 workers were on sick-leave due to mental disorders. Our set of files contributed to sharing the written basic policy of return to work among employees on sick leave with mental disorders, GPs, occupational physicians and personnel officers. That sharing led to facilitating a smooth return to work. Although there are differences in the legal and medical systems between Japan and other countries, our concept of sharing the written basic policy may give some help to occupational physicians in other parts of the world as well.

  9. Measuring oral health self perceptions as part of a concise patient survey.

    Science.gov (United States)

    Busby, M; Burke, F J T; Matthews, R; Cyrta, J; Mullins, A

    2012-12-01

    To investigate the measurement of oral health self perceptions, as part of a concise patient survey, and to consider the potential value of including this aspect in survey instruments. In 2011, the data collected from 42,794 patients attending 276 practices participating in a voluntary accreditation programme patient survey were reviewed, with a particular emphasis on three oral health impact questions (OHIQs) included in the instrument. These three questions were about comfort (pain), function and dental appearance. Patient self perceptions of oral health varied with age. For each of the three OHIQs the percentage of patients reporting 'ideal' health fell with age to some extent, although for each of the OHIQs the percentage of patients reporting 'unacceptable' health remained below 3% and varied little with age. Statistically significant variations from the mean scores for these OHIQs were observed for some of the participating practices, which would not be explained by age variations in their patient sample alone. Patient surveys are a useful opportunity to elicit collective feedback from patients on self perceived oral health. When results are benchmarked they can inform practices, particularly when reviewed together with additional relevant data, of opportunities to develop clinical services to produce still higher standards of oral health and wellbeing for their patients.

  10. A Concise and Comprehensive Description of Shoulder Pathology and Procedures: The 4D Code System

    Directory of Open Access Journals (Sweden)

    Laurent Lafosse

    2012-01-01

    Full Text Available Background. We introduce a novel description system of shoulder pathoanatomy. Its goal is to provide a comprehensive three-dimensional picture, with an additional component of time; thus, we call it the 4D code. Methods. Each line of the code starts with right versus left and a time designation. The pillar components are recorded regardless of pathology; they include subscapularis, long head of biceps tendon, supraspinatus, infraspinatus, and teres minor. Secondary elements can be added if there is observed pathology, including acromioclavicular joint, glenohumeral joint, labrum, tear configuration, location and extent of partial cuff tear, calcific tendonitis, fatty infiltration, and neuropathy. Results. We provide two illustrative examples of patients which show the ease and effectiveness of the 4D code. With a few simple lines, significant amount of information about patients’ pathology, surgery, and recovery can be easily conveyed. Discussion. We utilize existing validated classification systems for parts of the shoulder and provide a frame work to build a comprehensive picture. The alphanumeric code provides a simple language that is universally understood. The 4D code is concise yet complete. It seeks to improve efficiency and accuracy of the communication, documentation, and visualization of shoulder pathology within individual practices and between providers.

  11. Concise synthesis and two-photon-excited deep-blue emission of 1,8-diazapyrenes.

    Science.gov (United States)

    He, Tingchao; Too, Pei Chui; Chen, Rui; Chiba, Shunsuke; Sun, Handong

    2012-09-01

    Efficient violet-blue-emitting molecules are especially useful for applications in full-color displays, solid-state lighting, as well as in two-photon absorption (TPA) excited frequency-upconverted violet-blue lasing. However, the reported violet-blue-emitting molecules generally possess small TPA cross sections. In this work, new 1,8-diazapyrenes derivatives 3 with blue two-photon-excited fluorescence emission were concisely synthesized by the coupling reaction of readily available 1,4-naphthoquinone O,O-diacetyl dioxime (1) with internal alkynes 2 under the [{RhCl(2)Cp*}(2)]-Cu(OAc)(2) (Cp*=pentamethylcyclopentadienyl ligand) bimetallic catalytic system. Elongation of the π-conjugated length of 1,8-diazapyrenes 3 led to the increase of TPA cross sections without the expense of a redshift of the emission wavelength, probably due to the rigid planar structure of chromophores. It is especially noteworthy that 2,3,6,7-tetra(4-bromophenyl)-1,8-diazapyrene (3c) has a larger TPA cross section than those of other molecules reported so far. These experimental results are explained in terms of the effects of extension of the π-conjugated system, intramolecular charge transfer, and reduced detuning energy. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Concise catalog of deep-sky objects astrophysical information for 550 galaxies, clusters and nebulae

    CERN Document Server

    Finlay, Warren H

    2014-01-01

    This book is for the amateur astronomer who wants to know about the astrophysical nature of deep sky objects. The information is presented in a concise format and is equally valuable when used as background reading or, alternatively, at the telescope eyepiece.   The past decades have seen an unprecedented increase in professional astronomers' understanding of astronomical objects. However, generally this information is contained in journal publications that most amateur astronomers either do not have access to or would find difficult to read. In this book, basic data on each object (e.g., magnitude, location, distance, age if known) is presented in a way that allows the reader to quickly access the information. This is followed by some remarks that capture the most fascinating astrophysical facts.   Although there are thousands of deep sky objects observed by astronomers, only a small number of these are commonly observed by a wide audience. Thus, coverage here is limited to approximately 500 of the most co...

  13. 7-endo selective aryl radical cyclization onto enamides leading to 3-benzazepines: concise construction of a cephalotaxine skeleton.

    Science.gov (United States)

    Taniguchi, Tsuyoshi; Ishita, Atsuko; Uchiyama, Masahiko; Tamura, Osamu; Muraoka, Osamu; Tanabe, Genzoh; Ishibashi, Hiroyuki

    2005-03-04

    Bu3SnH-mediated radical cyclizations of 2-(2-bromophenyl)-N-ethenylacetamide gave 6-exo cyclization product 15 as the major product, whereas N-[2-(2-bromophenyl)ethyl]-N-ethenylamides gave almost exclusively 7-endo cyclization products. These results indicated that the position of the carbonyl group on enamide played an important role in deciding the course of the cyclization. The 7-endo selective cyclization was applied to concise construction of a cephalotaxine skeleton.

  14. Preparation of novel pyrrolo [2,3-b]pyridine derivatives via a new concise synthetic approach

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Na; Jia, Haiyong; You, Xing; Jiang, Du; Lu, Kui; Yu, Peng [Key Laboratory of Industrial Microbiology, Ministry of Education, College of Biotechnology, Tianjin Key Laboratory of Industry Microbiology, College of Biotechnology, Sino-French Joint Lab of Food Nutrition/Safety and Medicinal Chemistry, Tianjin University of Science and Technology, Tianjin (China)

    2015-04-15

    The pyrrolo[2,3-b]pyridine core structure, a bioisostere of quinolones, is found in several molecules that possess important biological activity. We describe here a new, concise, three-step synthesis of pyrrolo[2,3-b]pyridines starting from L-alanine. A series of 4,7-dihydro-4-oxo-1H-pyrrolo[2,3-b]pyridine-5-carboxylic acid derivatives, which have not been previously reported, were synthesized using this approach.

  15. Detection of degenerative disease of the temporomandibular joint by bone scintigraphy: concise communication

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, H.A.; Bloom, C.Y.

    1980-10-01

    Nine patients with facial pain were evaluated with limited bone scans. The scintigrams correlated with microscopy in all patients, although radiographs correlated with microscopy in only five patients. The degenerative disease process in the temporomandibular joint was more extensive in the patients with radiographic and scintigraphic abnormalities than in those with scintigraphic abnormalities alone. The limited bone scan appears useful in detecting early degenerative changes in the temporomandibular joint.

  16. Concise Health Risk Tracking scale: a brief self-report and clinician rating of suicidal risk.

    Science.gov (United States)

    Trivedi, Madhukar H; Wisniewski, Stephen R; Morris, David W; Fava, Maurizio; Gollan, Jackie K; Warden, Diane; Nierenberg, Andrew A; Gaynes, Bradley N; Husain, Mustafa M; Luther, James F; Zisook, Sidney; Rush, A John

    2011-06-01

    Monitoring suicidality and risk following initiation of antidepressant treatment is an essential component of clinical care, but few brief, reliable ratings of suicidal ideation and behavior in adults are available. This report evaluates the psychometric properties of a brief self- and clinician-rated measure of factors related to the risk of suicide attempt or completion. Adult outpatients with nonpsychotic major depressive disorder (MDD) (n = 240) were enrolled from July 2007 through February 2008 and treated in an 8-week, open-label trial with the clinician's choice of a selective serotonin reuptake inhibitor at 6 primary care and 9 psychiatric clinical care settings in the National Institute of Mental Health-funded Depression Trials Network. Diagnosis of MDD was determined by the Psychiatric Diagnostic Screening Questionnaire and an MDD checklist based on DSM-IV-TR criteria. Suicidal ideation and behavior are 1 of 9 symptoms of MDD (depressed mood, loss of interest, appetite or weight change, sleep disturbance, reduced concentration or indecisiveness, fatigue or decreased energy, psychomotor agitation or retardation, feelings of worthlessness, or excessive guilt). The newly developed Concise Health Risk Tracking (CHRT) scale was administered both as the CHRT Self-Report (CHRT-SR) and Clinician Rating (CHRT-C) scales. Psychometric evaluations were conducted on both scales. The internal consistency (Cronbach α) was .77 for the 7-item CHRT-C and .78 for the 7-item CHRT-SR with a consistent factor structure, and 3 independent factors (current suicidal thoughts and plans, perceived lack of social support, and hopelessness) for both versions. The 7-item CHRT-C and the 7-item CHRT-SR have excellent psychometric properties and can be used to monitor suicidal risk in clinical practice and research settings. Whether either scale will predict suicide attempts or completions in actual practice would require a very large prospective study sample. Clinicaltrials

  17. Highly concise routes to epothilones: the total synthesis and evaluation of epothilone 490.

    Science.gov (United States)

    Biswas, Kaustav; Lin, Hong; Njardarson, Jon T; Chappell, Mark D; Chou, Ting-Chao; Guan, Yongbiao; Tong, William P; He, Lifeng; Horwitz, Susan B; Danishefsky, Samuel J

    2002-08-21

    A concise modular laboratory construction of the epothilone class of promising antitumor agents has been accomplished. For the first time in the epothilone area, the new synthesis exploits the power of ring-closing olefin metathesis (RCM) in a stereospecific way. Previous attempts at applying RCM to epothilone syntheses have been repeatedly plagued by complete lack of stereocontrol in the generation of the desired 12,13-olefin geometry in the products. The isolation of epothilone 490 (3) prompted us to reevaluate the utility of the RCM procedure for fashioning the 10,11-olefin, with the Z-12,13-olefin geometry already in place. Olefin metathesis of the triene substrate 12 afforded the product diene macrolide in stereoselective fashion. For purposes of greater synthetic convergency, the C3-(S)-alcohol was fashioned late in the synthesis, using chiral titanium-mediated aldol conditions with the entire O-alkyl fragment as a C15 acetate as the enolate component. Examination of the effects of protecting groups on the RCM process showed that deprotection of the C7 alcohol has a beneficial effect on the reaction yield. Performing the RCM as the last synthetic step in the sequence afforded a 64% yield of only the desired E-olefin. Selective diimide reduction of the new 10,11-olefin yielded 12,13-desoxyepothilone B, our current clinical candidate, demonstrating the utility of this new RCM-reduction protocol in efficiently generating the epothilone framework. Furthermore, the new olefin was selectively funtionalized to demonstrate the advantage conferred by this route for the construction of new analogues for SAR studies, in cytoxicity and microtubule affinity screens. Also described is the surprisingly poor in vivo performance of epothilone 490 in xenografts in the light of very promising in vitro data. This disappointing outcome was traced to unfavorable pharmacokinetic features of the drug in murine plasma. By the pharmacokinetic criteria, the prognosis for the

  18. M2Di: Concise and efficient MATLAB 2-D Stokes solvers using the Finite Difference Method

    Science.gov (United States)

    Räss, Ludovic; Duretz, Thibault; Podladchikov, Yury Y.; Schmalholz, Stefan M.

    2017-02-01

    Recent development of many multiphysics modeling tools reflects the currently growing interest for studying coupled processes in Earth Sciences. The core of such tools should rely on fast and robust mechanical solvers. Here we provide M2Di, a set of routines for 2-D linear and power law incompressible viscous flow based on Finite Difference discretizations. The 2-D codes are written in a concise vectorized MATLAB fashion and can achieve a time to solution of 22 s for linear viscous flow on 10002 grid points using a standard personal computer. We provide application examples spanning from finely resolved crystal-melt dynamics, deformation of heterogeneous power law viscous fluids to instantaneous models of mantle flow in cylindrical coordinates. The routines are validated against analytical solution for linear viscous flow with highly variable viscosity and compared against analytical and numerical solutions of power law viscous folding and necking. In the power law case, both Picard and Newton iterations schemes are implemented. For linear Stokes flow and Picard linearization, the discretization results in symmetric positive-definite matrix operators on Cartesian grids with either regular or variable grid spacing allowing for an optimized solving procedure. For Newton linearization, the matrix operator is no longer symmetric and an adequate solving procedure is provided. The reported performance of linear and power law Stokes flow is finally analyzed in terms of wall time. All MATLAB codes are provided and can readily be used for educational as well as research purposes. The M2Di routines are available from Bitbucket and the University of Lausanne Scientific Computing Group website, and are also supplementary material to this article.

  19. A method for concise reporting of joint reaction forces orientation during gait.

    Science.gov (United States)

    Fraysse, François; Arnold, John; Thewlis, Dominic

    2016-10-03

    Estimation of joint reaction forces (JRF) is critical for the understanding of load-related pathologies, such as osteoarthritis (OA). Typically, singular components at discrete time-points are presented without knowledge of their orientation over time. The aim of this study was to develop and demonstrate the utility of a method for the concise and intuitive representation of JRF orientation. A scaled musculoskeletal model of the lower limbs was informed by walking gait data from adults with knee OA (n=10) and healthy controls (C) (n=10). Muscle forces and subsequently JRF were computed. The intersections of the JRF vector and a transverse plane proximal to the joint were computed. The 95% confidence ellipse was computed for these points. This allowed the following metrics to be calculated: the normalised area of the ellipse (A); the ratio of the long and short axes (R); the angle between the long axis of the ellipse and the anterior-posterior axis of the distal segment (α) and the position of the centre of the ellipse relative to the origin of the segment (XC, ZC). At the knee, the OA group displayed a more AP-oriented JRF (OA: α=3.0±28.2°C: α=-15.3±37.1°, p= 0.03), less overall variation in the JRF orientation (OA: A=0.04±0.03C: A=0.07±0.03, pjoint contact forces in clinically relevant pathologies. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Scanning laser Doppler vibrometry

    DEFF Research Database (Denmark)

    Brøns, Marie; Thomsen, Jon Juel

    With a Scanning Laser Doppler Vibrometer (SLDV) a vibrating surface is automatically scanned over predefined grid points, and data processed for displaying vibration properties like mode shapes, natural frequencies, damping ratios, and operational deflection shapes. Our SLDV – a PSV-500H from...

  1. Frequency scanning microstrip antennas

    DEFF Research Database (Denmark)

    Danielsen, Magnus; Jørgensen, Rolf

    1979-01-01

    The principles of using radiating microstrip resonators as elements in a frequency scanning antenna array are described. The resonators are cascade-coupled. This gives a scan of the main lobe due to the phase-shift in the resonator in addition to that created by the transmission line phase...

  2. The clinical effectiveness of concise cognitive behavioral therapy with or without pharmacotherapy for depressive and anxiety disorders; a pragmatic randomized controlled equivalence trial in clinical practice.

    Science.gov (United States)

    Meuldijk, D; Carlier, I V E; van Vliet, I M; van Veen, T; Wolterbeek, R; van Hemert, A M; Zitman, F G

    2016-03-01

    Depressive and anxiety disorders contribute to a high disease burden. This paper investigates whether concise formats of cognitive behavioral- and/or pharmacotherapy are equivalent with longer standard care in the treatment of depressive and/or anxiety disorders in secondary mental health care. A pragmatic randomized controlled equivalence trial was conducted at five Dutch outpatient Mental Healthcare Centers (MHCs) of the Regional Mental Health Provider (RMHP) 'Rivierduinen'. Patients (aged 18-65 years) with a mild to moderate anxiety and/or depressive disorder, were randomly allocated to concise or standard care. Data were collected at baseline, 3, 6 and 12 months by Routine Outcome Monitoring (ROM). Primary outcomes were the Brief Symptom Inventory (BSI) and the Web Screening Questionnaire (WSQ). We used Generalized Estimating Equations (GEE) to assess outcomes. Between March 2010 and December 2012, 182 patients, were enrolled (n=89 standard care; n=93 concise care). Both intention-to-treat and per-protocol analyses demonstrated equivalence of concise care and standard care at all time points. Severity of illness reduced, and both treatments improved patient's general health status and subdomains of quality of life. Moreover, in concise care, the beneficial effects started earlier. Concise care has the potential to be a feasible and promising alternative to longer standard secondary mental health care in the treatment of outpatients with a mild to moderate depressive and/or anxiety disorder. For future research, we recommend adhering more strictly to the concise treatment protocols to further explore the beneficial effects of the concise treatment. The study is registered in the Netherlands Trial Register, number NTR2590. Clinicaltrials.gov identifier: NCT01643642. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Laser Scanning in Forests

    Directory of Open Access Journals (Sweden)

    Håkan Olsson

    2012-09-01

    Full Text Available The introduction of Airborne Laser Scanning (ALS to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System, IMU (Inertial Measurement Unit and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based forest inventory approaches have been reported feasible for operational activities [8–12]. ALS is currently operationally applied for stand level forest inventories, for example, in Nordic countries. In Finland alone, the adoption of ALS for forest data collection has led to an annual savings of around 20 M€/year, and the work is mainly done by companies instead of governmental organizations. In spite of the long implementation times and there being a limited tradition of making changes in the forest sector, laser scanning was commercially and operationally applied after about only one decade of research. When analyzing high-ranked journal papers from ISI Web of Science, the topic of laser scanning of forests has been the driving force for the whole laser scanning research society over the last decade. Thus, the topic “laser scanning in forests” has provided a significant industrial, societal and scientific impact. [...

  4. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... energy. top of page What are some common uses of the procedure? The thyroid scan is used ... gland evaluate changes in the gland following medication use, surgery, radiotherapy or chemotherapy top of page How ...

  5. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... nuclear medicine procedures are able to pinpoint molecular activity within the body, they offer the potential to ... tells you otherwise, you may resume your normal activities after your nuclear medicine scan. If any special ...

  6. Body CT (CAT Scan)

    Science.gov (United States)

    ... Professions Site Index A-Z Computed Tomography (CT) - Body Computed tomography (CT) of the body uses special ... the Body? What is CT Scanning of the Body? Computed tomography, more commonly known as a CT ...

  7. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... scan and uptake uses small amounts of radioactive materials called radiotracers, a special camera and a computer ... last two months that used iodine-based contrast material. Your doctor will instruct you on how to ...

  8. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... evaluate changes in the gland following medication use, surgery, radiotherapy or chemotherapy top of page How should ... such as an x-ray or CT scan, surgeries or treatments using iodinated contrast material within the ...

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... imaging procedures. For many diseases, nuclear medicine scans yield the most useful information needed to make a ... any. Nuclear medicine is less expensive and may yield more precise information than exploratory surgery. Risks Because ...

  10. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Actual scanning time for each thyroid uptake is five minutes or less. top of page What will ... diagnostic procedures have been used for more than five decades, and there are no known long-term ...

  11. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) is ... thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that uses ...

  12. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... several hours before your exam because eating can affect the accuracy of the uptake measurement. Jewelry and ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information ...

  13. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... iodine, medications and anesthetics. are breastfeeding. In the days prior to your examination, blood tests may be ... are scheduled for an additional procedure that same day that requires an intravenous line. Actual scanning time ...

  14. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... gland in the neck that controls metabolism , a chemical process that regulates the rate at which the body converts food to energy. top of page What are some common uses of the procedure? The thyroid scan is ...

  15. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... liquid or capsule form, it is typically swallowed up to 24 hours before the scan. The radiotracer given by intravenous injection is usually given up to 30 minutes prior to the test. When ...

  16. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... regulates the rate at which the body converts food to energy. top of page What are some ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information ...

  17. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Because nuclear medicine procedures are able to pinpoint molecular activity within the body, they offer the potential ... or imaging device that produces pictures and provides molecular information. The thyroid scan and thyroid uptake provide ...

  18. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... body. top of page How does the procedure work? With ordinary x-ray examinations, an image is ... with other imaging techniques, such as CT or MRI. However, nuclear medicine scans are more sensitive than ...

  19. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... a special camera or imaging device that produces pictures and provides molecular information. The thyroid scan and ... and with the help of a computer, create pictures offering details on both the structure and function ...

  20. Pediatric CT Scans

    Science.gov (United States)

    The Radiation Epidemiology Branch and collaborators have initiated a retrospective cohort study to evaluate the relationship between radiation exposure from CT scans conducted during childhood and adolescence and the subsequent development of cancer.

  1. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... abnormal was found, and should not be a cause of concern for you. If you had an ... abnormal was found, and should not be a cause of concern for you. Actual scanning time for ...

  2. Scanning Auger Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — A JEOL model 7830F field emission source, scanning Auger microscope.Specifications / Capabilities:Ultra-high vacuum (UHV), electron gun range from 0.1 kV to 25 kV,...

  3. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... scan and thyroid uptake provide information about the structure and function of the thyroid. The thyroid is ... computer, create pictures offering details on both the structure and function of organs and tissues in your ...

  4. The Scanning Optical Microscope.

    Science.gov (United States)

    Sheppard, C. J. R.

    1978-01-01

    Describes the principle of the scanning optical microscope and explains its advantages over the conventional microscope in the improvement of resolution and contrast, as well as the possibility of producing a picture from optical harmonies generated within the specimen.

  5. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... scan you are undergoing. top of page What does the equipment look like? The special camera and ... area of your body. top of page How does the procedure work? With ordinary x-ray examinations, ...

  6. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... eat for several hours before your exam because eating can affect the accuracy of the uptake measurement. ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information ...

  7. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... found, and should not be a cause of concern for you. If you had an intravenous line ... found, and should not be a cause of concern for you. Actual scanning time for each thyroid ...

  8. Slow Scan Telemedicine

    Science.gov (United States)

    1984-01-01

    Originally developed under contract for NASA by Ball Bros. Research Corporation for acquiring visual information from lunar and planetary spacecraft, system uses standard closed circuit camera connected to a device called a scan converter, which slows the stream of images to match an audio circuit, such as a telephone line. Transmitted to its destination, the image is reconverted by another scan converter and displayed on a monitor. In addition to assist scans, technique allows transmission of x-rays, nuclear scans, ultrasonic imagery, thermograms, electrocardiograms or live views of patient. Also allows conferencing and consultation among medical centers, general practitioners, specialists and disease control centers. Commercialized by Colorado Video, Inc., major employment is in business and industry for teleconferencing, cable TV news, transmission of scientific/engineering data, security, information retrieval, insurance claim adjustment, instructional programs, and remote viewing of advertising layouts, real estate, construction sites or products.

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of page What are some common uses of the procedure? The thyroid scan is used to determine ... you are undergoing. top of page What does the equipment look like? The special camera and imaging ...

  10. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... to identify disease in its earliest stages as well as a patient’s immediate response to therapeutic interventions. ... but is often performed on hospitalized patients as well. Thyroid Scan You will be positioned on an ...

  11. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Uptake? A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) ... of thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that ...

  12. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... medical tests that help physicians diagnose and evaluate medical conditions. These imaging scans use radioactive materials called radiopharmaceuticals or radiotracers . Depending on the type of nuclear medicine exam, the radiotracer is either injected into the body, ...

  13. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... many types of cancers, heart disease, gastrointestinal, endocrine, neurological disorders and other abnormalities within the body. Because ... with other imaging techniques, such as CT or MRI. However, nuclear medicine scans are more sensitive than ...

  14. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... are noninvasive and, with the exception of intravenous injections, are usually painless medical tests that help physicians ... before the scan. The radiotracer given by intravenous injection is usually given up to 30 minutes prior ...

  15. Scanning ultrafast electron microscopy

    OpenAIRE

    Yang, Ding-Shyue; Mohammed, Omar F.; Zewail, Ahmed H.

    2010-01-01

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for whic...

  16. Laser Scanning Fluorescence Microscope

    Science.gov (United States)

    Hansen, Eric W.; Zelten, J. Peter; Wiseman, Benjamin A.

    1988-06-01

    We report on the development of a laser scanning fluorescence microscope possessing several features which facilitate its application to biological and biophysical analyses in living cells. It is built around a standard inverted microscope stand, enabling the use of standard optics, micromanipulation apparatus, and conventional (including video) microscopy in conjunction with laser scanning. The beam is scanned across the specimen by a pair of galvanometer-mounted mirrors, driven by a programmable controller which can operate in three modes: full raster scan, region of interest, and random-access. A full 512x512 pixel image can be acquired in one second. In region of interest mode, several subareas of the field can be selected for more rapid or detailed analysis. For those cases where the time scale of the observed phenomenon precludes full-field imaging, or where a full-field image is unnecessary, the random access mode enables an arbitrary pattern of isolated points to be selected and rapidly sequenced through. Via a graphical user interface implemented on the system's host computer, a user will be able to take a scout image either with video or a full-field laser scan, select regions or points on the scout image with a mouse, and set up experimental parameters such as detector integration times with a window-style menu. The instrument is designed to be a flexible testbed for investigating new techniques, without compromising its utility as a tool for biological research.

  17. Resistência ao cisalhamento da colagem dos compósitos Concise e Transbond XT com e sem agente de união Shear bond strength of Concise and Transbond XT composites with and without bonding agent

    Directory of Open Access Journals (Sweden)

    Alexandre Maêda Neves

    2011-12-01

    Full Text Available OBJETIVO: avaliar a resistência ao cisalhamento da colagem de braquetes e o Índice de Remanescente de Adesivo (IRA dos compósitos Concise e Transbond XT com ou sem agente de união. MÉTODOS: a amostra consistiu de 60 incisivos bovinos divididos em 4 grupos (n=15. Em todos os corpos de prova foram realizados profilaxia com pedra-pomes e condicionamento do esmalte com ácido fosfórico a 37%. Nos Grupos 1 e 2, foram colados braquetes com o compósito Concise, respectivamente, com e sem aplicação da resina fluida. Nos Grupos 3 e 4, utilizou-se o Transbond XT, respectivamente, com e sem aplicação do XT Primer. Nesses dois últimos grupos, as colagens foram fotopolimerizadas por 40 segundos. O ensaio de resistência ao cisalhamento da amostra foi realizado em máquina Instron à velocidade de 0,5mm/min e, em seguida, foi avaliado o IRA. RESULTADOS: com relação à resistência ao cisalhamento, o Grupo 4 foi estatisticamente superior aos Grupos 1 e 2 (p0,05. Não foram encontradas diferenças estatísticas significativas entre os Grupos 1, 2 e 3 (p>0,05. Como resultados do IRA, o Grupo 3 foi estatisticamente superior ao Grupo 2 (p0,05. Não foram encontradas diferenças estatísticas significativas entre os grupos 1, 2 e 4 (p>0,05. CONCLUSÃO: os compósitos Concise e Transbond XT obtiveram valores de resistência adesiva adequados com ou sem a utilização de seus respectivos agentes de união.Transbond XT composites with and without the use of a bonding agent. METHODS: The sample consisted of 60 bovine incisors divided into four groups (n=15. All teeth were subjected to prophylaxis with pumice and enamel etching with phosphoric acid at 37%. In Groups 1 and 2 brackets were bonded with Concise composite with and without application of enamel bond resin, respectively. In Groups 3 and 4, Transbond XT was used with and without XT Primer application, respectively. In these latter groups bonding was light cured for 40 seconds. Specimen shear

  18. Scanning laser video camera/ microscope

    Science.gov (United States)

    Wang, C. P.; Bow, R. T.

    1984-10-01

    A laser scanning system capable of scanning at standard video rate has been developed. The scanning mirrors, circuit design and system performance, as well as its applications to video cameras and ultra-violet microscopes, are discussed.

  19. Calibration of scanning Lidar

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Courtney, Michael

    This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Høvsøre. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibrations at two heights against two cup anemometers mounted on a mast. Additio......This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Høvsøre. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibrations at two heights against two cup anemometers mounted on a mast...

  20. Tomographic scanning imager.

    Science.gov (United States)

    Hovland, Harald

    2009-07-06

    In tomographic scanning (TOSCA) imaging, light from a scene is focused onto a reticle mask using conical scan optics, and collected on a single element detector. Alternatively, one or several detectors replace the reticle. Tomographic processing techniques are then applied to the one-dimensional signal to reproduce a two-dimensional image. The TOSCA technique is presented in detail, including its mathematical foundations and some of its limitations. It is shown how TOSCA imaging can be used in a multispectral configuration, and compares well with more conventional alternatives both in simplicity and performance. Examples of image reconstruction using TOSCA techniques are shown.

  1. Scanning the phenomenological MSSM

    CERN Document Server

    Wuerzinger, Jonas

    2017-01-01

    A framework to perform scans in the 19-dimensional phenomenological MSSM is developed and used to re-evaluate the ATLAS experiments' sensitivity to R-parity-conserving supersymmetry with LHC Run 2 data ($\\sqrt{s}=13$ TeV), using results from 14 separate ATLAS searches. We perform a $\\tilde{t}_1$ dedicated scan, only considering models with $m_{\\tilde{t}_1}<1$ TeV, while allowing both a neutralino ($\\tilde{\\chi}_1^0$) and a sneutrino ($\\tilde{\

  2. A concise drug alerting rule set for Chinese hospitals and its application in computerized physician order entry (CPOE).

    Science.gov (United States)

    Zhang, Yinsheng; Long, Xin; Chen, Weihong; Li, Haomin; Duan, Huilong; Shang, Qian

    2016-01-01

    A minimized and concise drug alerting rule set can be effective in reducing alert fatigue. This study aims to develop and evaluate a concise drug alerting rule set for Chinese hospitals. The rule set covers not only western medicine, but also Chinese patent medicine that is widely used in Chinese hospitals. A 2600-bed general hospital in China. In order to implement the drug rule set in clinical information settings, an information model for drug rules was designed and a rule authoring tool was developed accordingly. With this authoring tool, clinical pharmacists built a computerized rule set that contains 150 most widely used and error-prone drugs. Based on this rule set, a medication-related clinical decision support application was built in CPOE. Drug alert data between 2013/12/25 and 2015/07/01 were used to evaluate the effect of the rule set. Number of alerts, number of corrected/overridden alerts, accept/override rate. Totally 18,666 alerts were fired and 2803 alerts were overridden. Overall override rate is 15.0% (2803/18666) and accept rate is 85.0%. The rule set has been well received by physicians and can be used as a preliminary medical order screening tool to reduce pharmacists' workload. For Chinese hospitals, this rule set can serve as a starter kit for building their own pharmaceutical systems or as a reference to tier commercial rule set.

  3. A Concise Design for the Irradiation of U–10Zr Metallic Fuel at a Very Low Burnup

    Directory of Open Access Journals (Sweden)

    Haibing Guo

    2017-06-01

    Full Text Available In order to investigate the swelling behavior and fuel–cladding interaction mechanism of U–10Zr alloy metallic fuel at very low burnup, an irradiation experiment was concisely designed and conducted on the China Mianyang Research Reactor. Two types of irradiation samples were designed for studying free swelling without restraint and the fuel–cladding interaction mechanism. A new bonding material, namely, pure aluminum powder, was used to fill the gap between the fuel slug and sample shell for reducing thermal resistance and allowing the expansion of the fuel slug. In this paper, the concise irradiation rig design is introduced, and the neutronic and thermal–hydraulic analyses, which were carried out mainly using MCNP (Monte Carlo N-Particle and FLUENT codes, are presented. Out-of-pile tests were conducted prior to irradiation to verify the manufacturing quality and hydraulic performance of the rig. Nondestructive postirradiation examinations using cold neutron radiography technology were conducted to check fuel cladding integrity and swelling behavior. The results of the preliminary examinations confirmed the safety and effectiveness of the design.

  4. A concise design o the irradiation of U-10Zr metallic fuel at a very low burnup

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Hai Bing; Zhou, Wei; Sun, Yong; Qian, Dazhi; Ma, Jimin; Leng, Jun; Huo, Hyoung; Wang, Shaohua [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang (China)

    2017-06-15

    In order to investigate the swelling behavior and fuel–cladding interaction mechanism of U–10Zr alloy metallic fuel at very low burnup, an irradiation experiment was concisely designed and conducted on the China Mianyang Research Reactor. Two types of irradiation samples were designed for studying free swelling without restraint and the fuel–cladding interaction mechanism. A new bonding material, namely, pure aluminum powder, was used to fill the gap between the fuel slug and sample shell for reducing thermal resistance and allowing the expansion of the fuel slug. In this paper, the concise irradiation rig design is introduced, and the neutronic and thermal–hydraulic analyses, which were carried out mainly using MCNP (Monte Carlo N-Particle) and FLUENT codes, are presented. Out-of-pile tests were conducted prior to irradiation to verify the manufacturing quality and hydraulic performance of the rig. Nondestructive postirradiation examinations using cold neutron radiography technology were conducted to check fuel cladding integrity and swelling behavior. The results of the preliminary examinations confirmed the safety and effectiveness of the design.

  5. Scanning transmission electron microscope

    NARCIS (Netherlands)

    Kruit, P.

    2006-01-01

    The invention relates to a scanning transmission electron microscope comprising an electron source, an electron accelerator and deflection means for directing electrons emitted by the electron source at an object to be examined, and in addition a detector for detecting electrons coming from the

  6. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... you: have had any tests, such as an x-ray or CT scan, surgeries or treatments using iodinated ... page How does the procedure work? With ordinary x-ray examinations, an image is made by passing x- ...

  7. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... may be performed to measure the level of thyroid hormones in your blood. You may be told not to eat for several hours before your exam because eating can affect the ... as well. Thyroid Scan You will be positioned on an examination ...

  8. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... or less. top of page What will I experience during and after the procedure? Most thyroid scan ... areas. Outside links: For the convenience of our users, RadiologyInfo .org provides links to relevant websites. RadiologyInfo. ...

  9. Scanning bubble chamber pictures

    CERN Multimedia

    1974-01-01

    These were taken at the 2 m hydrogen bubble chamber. The photo shows an early Shiva system where the pre-measurements needed to qualify the event were done manually (cf photo 7408136X). The scanning tables were located in bld. 12. Gilberte Saulmier sits on foreground, Inge Arents at centre.

  10. Cervical MRI scan

    Science.gov (United States)

    ... cancer in the spine Arthritis in the spine MRI works better than CT scan in diagnosing these problems ... test. The strong magnetic fields created during an MRI can cause heart pacemakers and other implants to not work as well. It can also cause a piece ...

  11. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of page Additional Information and Resources RTAnswers.org Radiation Therapy for Head and Neck Cancer top of page ... and Neck Cancer Treatment Radioactive Iodine (I-131) Therapy Head and Neck Cancer X-ray, Interventional Radiology and Nuclear ... to Thyroid Scan and Uptake ...

  12. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) is also known as a thyroid uptake. ... a patient’s immediate response to therapeutic interventions. Nuclear ... medical tests that help physicians diagnose and evaluate medical conditions. ...

  13. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available Toggle navigation Test/Treatment Patient Type Screening/Wellness Disease/Condition Safety En Español More Info Images/Videos About Us News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake ...

  14. Terahertz scanning probe microscope

    NARCIS (Netherlands)

    Klapwijk, T.M.

    2014-01-01

    The invention provides aterahertz scanning probe microscope setup comprising (i) a terahertz radiation source configured to generate terahertz radiation; (ii) a terahertz lens configured to receive at least part of the terahertz radiation from the terahertz radiation source; (iii) a cantilever unit

  15. SPM: Scanning positron microscope

    Directory of Open Access Journals (Sweden)

    Marcel Dickmann

    2015-08-01

    Full Text Available The Munich scanning positron microscope, operated by the Universität der Bundeswehr München and the Technische Universität München, located at NEPOMUC, permits positron lifetime measurements with a lateral resolution in the µm range and within an energy range of 1 – 20 keV.

  16. Laser Beam Scanning Device.

    Science.gov (United States)

    metal mirror. Multiple thermocouple wires attached to the rear of the mirror provide temperature (and hence beam power) information at various points...on the mirror. Scanning is achieved by means of a selector switch which sequentially samples the thermocouple outputs. The thermocouple output voltages are measured and recorded as a function of laser beam power.

  17. Mammographic scanning equalization radiography.

    Science.gov (United States)

    Sabol, J M; Soutar, I C; Plewes, D B

    1993-01-01

    It is well recognized that variations in breast thickness and parenchymal composition can produce a range of exposure which exceeds the latitude of high contrast mammographic film/screen combinations. Optimal imaging of the dense breast is desired since 30%-60% of women present with dense breasts, and they are believed to be at the highest relative risk of developing breast cancer. The application of scanning equalization radiography to mammography has been investigated through the construction and characterization of a prototype mammographic scanning equalization radiography (MSER) system, designed to image mammographic phantoms. The MSER system exposes a Min-R/MRH cassette by raster scanning a 2.0 x 1.6 cm beam of pulsed x-rays across the cassette. A scanning detector behind the cassette measures the local x-ray transmission of the breast. Feedback of the transmission information is used to modulate the duration of each x-ray pulse, to equalize the film exposure. The effective dynamic range of the MSER system is 25 times greater than that of conventional mammography. Artifact-free images of mammographic phantoms show that MSER effectively overcomes the latitude limitations of film/screen mammography, enabling high contrast imaging over a wide range of object x-ray transmission. Anthropomorphic phantom images show that MSER offers up to a sixfold increase in film contrast in the normally underexposed regions of conventional mammograms. Characterization of the entrance exposure shows that there is not a significant difference in exposure between MSER and conventional mammographic techniques, suggesting that both would pose comparable risk to the patient. Calculations show that the construction of a clinical multiple beam MSER system is feasible with minor changes to existing technology.

  18. Scanning transmission electron microscope

    OpenAIRE

    Kruit, P.

    2006-01-01

    The invention relates to a scanning transmission electron microscope comprising an electron source, an electron accelerator and deflection means for directing electrons emitted by the electron source at an object to be examined, and in addition a detector for detecting electrons coming from the object and, connected to the detector, a device for processing the detected electrons so as to form an object image, wherein a beam splitter is provided for dividing the electron beam from the electron...

  19. Scanning micro-sclerometer

    Science.gov (United States)

    Oliver, Warren C.; Blau, Peter J.

    1994-01-01

    A scanning micro-sclerometer measures changes in contact stiffness and correlates these changes to characteristics of a scratch. A known force is applied to a contact junction between two bodies and a technique employing an oscillating force is used to generate the contact stiffness between the two bodies. As the two bodies slide relative to each other, the contact stiffness changes. The change is measured to characterize the scratch.

  20. Scanning drop sensor

    Science.gov (United States)

    Jin, Jian; Xiang, Chengxiang; Gregoire, John M.; Shinde, Aniketa A.; Guevarra, Dan W.; Jones, Ryan J.; Marcin, Martin R.; Mitrovic, Slobodan

    2017-05-09

    Electrochemical or electrochemical and photochemical experiments are performed on a collection of samples by suspending a drop of electrolyte solution between an electrochemical experiment probe and one of the samples that serves as a test sample. During the electrochemical experiment, the electrolyte solution is added to the drop and an output solution is removed from the drop. The probe and collection of samples can be moved relative to one another so the probe can be scanned across the samples.

  1. Scanning ultrafast electron microscopy.

    Science.gov (United States)

    Yang, Ding-Shyue; Mohammed, Omar F; Zewail, Ahmed H

    2010-08-24

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability.

  2. Concise Review: Dental Pulp Stem Cells: A Novel Cell Therapy for Retinal and Central Nervous System Repair.

    Science.gov (United States)

    Mead, Ben; Logan, Ann; Berry, Martin; Leadbeater, Wendy; Scheven, Ben A

    2017-01-01

    Dental pulp stem cells (DPSC) are neural crest-derived ecto-mesenchymal stem cells that can relatively easily and non-invasively be isolated from the dental pulp of extracted postnatal and adult teeth. Accumulating evidence suggests that DPSC have great promise as a cellular therapy for central nervous system (CNS) and retinal injury and disease. The mode of action by which DPSC confer therapeutic benefit may comprise multiple pathways, in particular, paracrine-mediated processes which involve a wide array of secreted trophic factors and is increasingly regarded as the principal predominant mechanism. In this concise review, we present the current evidence for the use of DPSC to repair CNS damage, including recent findings on retinal ganglion cell neuroprotection and regeneration in optic nerve injury and glaucoma. Stem Cells 2017;35:61-67. © 2016 AlphaMed Press.

  3. Catalyst-controlled stereoselective olefin metathesis as a principal strategy in multistep synthesis design: a concise route to (+)-neopeltolide.

    Science.gov (United States)

    Yu, Miao; Schrock, Richard R; Hoveyda, Amir H

    2015-01-02

    Molybdenum-, tungsten-, and ruthenium-based complexes that control the stereochemical outcome of olefin metathesis reactions have been recently introduced. However, the complementary nature of these systems through their combined use in multistep complex molecule synthesis has not been illustrated. A concise diastereo- and enantioselective route that furnishes the anti-proliferative natural product neopeltolide is now disclosed. Catalytic transformations are employed to address every stereochemical issue. Among the featured processes are an enantioselective ring-opening/cross-metathesis promoted by a Mo monoaryloxide pyrrolide (MAP) complex and a macrocyclic ring-closing metathesis that affords a trisubstituted alkene and is catalyzed by a Mo bis(aryloxide) species. Furthermore, Z-selective cross-metathesis reactions, facilitated by Mo and Ru complexes, have been employed in the stereoselective synthesis of the acyclic dienyl moiety of the target molecule. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Concise and Accessible Representations for Multidimensional Datasets: Introducing a Framework Based on the nD-EVM and Kohonen Networks

    Directory of Open Access Journals (Sweden)

    Ricardo Pérez-Aguila

    2015-01-01

    Full Text Available A new framework intended for representing and segmenting multidimensional datasets resulting in low spatial complexity requirements and with appropriate access to their contained information is described. Two steps are going to be taken in account. The first step is to specify (n-1D hypervoxelizations, n≥2, as Orthogonal Polytopes whose nth dimension corresponds to color intensity. Then, the nD representation is concisely expressed via the Extreme Vertices Model in the n-Dimensional Space (nD-EVM. Some examples are presented, which, under our methodology, have storing requirements minor than those demanded by their original hypervoxelizations. In the second step, 1-Dimensional Kohonen Networks (1D-KNs are applied in order to segment datasets taking in account their geometrical and topological properties providing a non-supervised way to compact even more the proposed n-Dimensional representations. The application of our framework shares compression ratios, for our set of study cases, in the range 5.6496 to 32.4311. Summarizing, the contribution combines the power of the nD-EVM and 1D-KNs by producing very concise datasets’ representations. We argue that the new representations also provide appropriate segmentations by introducing some error functions such that our 1D-KNs classifications are compared against classifications based only in color intensities. Along the work, main properties and algorithms behind the nD-EVM are introduced for the purpose of interrogating the final representations in such a way that it efficiently obtains useful geometrical and topological information.

  5. Scanning radiographic apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Albert, R.D.

    1980-04-01

    Visual display of dental, medical or other radiographic images is realized with an x-ray tube in which an electron beam is scanned through an x-y raster pattern on a broad anode plate, the scanning being synchronized with the x-y sweep signals of a cathode ray tube display and the intensity signal for the display being derived from a small x-ray detector which receives x-rays that have passed through the subject to be imaged. Positioning and support of the detector are provided for by disposing the detector in a probe which may be attached to the x-ray tube at any of a plurality of different locations and by providing a plurality of such probes of different configuration in order to change focal length, to accommodate to different detector placements relative to the subject, to enhance patient comfort and to enable production of both periapical images and wider angle pantomographic images. High image definition with reduced radiation dosage is provided for by a lead glass collimator situated between the x-ray tube and subject and having a large number of spaced-apart minute radiation transmissive passages convergent on the position of the detector. Releasable mounting means enable changes of collimator in conjunction with changes of the probe to change focal length. A control circuit modifies the x-y sweep signals applied to the x-ray tube and modulates electron beam energy and current in order to correct for image distortions and other undesirable effects which can otherwise be present in a scanning x-ray system.

  6. Horizon Scanning for Pharmaceuticals

    DEFF Research Database (Denmark)

    Lepage-Nefkens, Isabelle; Douw, Karla; Mantjes, GertJan

    In 2016, the Belgian, Dutch, Luxembourg and Austrian governments declared their intention to collaborate on pharmaceutical policy (BeNeLuxA Collaboration). KCE was asked to lead a task force responsible for developing a Horizon Scanning methodology for pharmaceuticals and a possible model...... and filtration of new and emerging pharmaceutical products. It will maintain and update the HS database, organise company pipeline meetings, and disseminate the HSS’s outputs.  The HS unit works closely together with the designated national HS experts in each collaborating country. The national HS experts...

  7. Surface micromachined scanning mirrors

    DEFF Research Database (Denmark)

    Mattsson, Kent Erik

    1992-01-01

    Both aluminum cantilever and torsional scanning mirrors have been fabricated and their static and dynamic properties are studied experimentally and theoretically. The experiments showed resonance frequencies in the range of 163 k-Hz - 632 kHz for cantilever beams with Q values between 5 and 11....... Torsional mirrors showed resonance frequencies in the range of 410 kHz - 667 kHz with Q values of 10 - 17. All measurements performed at atmospheric pressure. Both types of mechanical structures were deflected electrostatically at large angles (± 5°) more than 1011 times without breaking and without any...

  8. Concise synthesis of didebromohamacanthin A and demethylaplysinopsine: addition of ethylenediamine and guanidine derivatives to the pyrrole-amino acid diketopiperazines in oxidative conditions.

    Science.gov (United States)

    Ermolenko, Ludmila; Zhaoyu, Hu; Lejeune, Clarisse; Vergne, Carine; Ratinaud, Céline; Nguyen, Thanh Binh; Al-Mourabit, Ali

    2014-02-07

    Oxidative nucleophilic addition of ethylenediamine and guanidine derivatives to pyrrole-amino acid diketopiperazines was shown to provide substituted 5,6-dihydro-2(1H)-piperazinones, quinoxalinones, and 2-aminoimidazolones. On the basis of this methodology, a concise approach to natural products didebromohamacanthin A and demethylaplysinopsine has been demonstrated.

  9. Confocal scanning Mueller polarimeter

    Science.gov (United States)

    Lompado, Arthur

    2009-08-01

    We describe the design, construction, calibration and testing of a confocal scanning Mueller polarimeter. A polarization state generator and polarization state analyzer have been inserted into the optical path of a conventional confocal scanning imager to collect the reflectance Muller matrix of samples measuring up to 6.26 mm on a side. Four sources are available for sample interrogation using diode lasers centered at 532 nm, 635 nm, 670 nm, and 785 nm. The device captures all required imagery to calculate the Mueller matrix of each image pixel in approximately 90 s. These matrices are then reduced into polarization imagery such as the diattenuation, retardance and depolarization index. Oftentimes this polarization imagery is quite different and potentially more informative than a conventional intensity image. There are a number of fields that can benefit from alternative/enhanced imagery, most notably in the biomedical, discrimination, and target recognition communities. The sensor has been designed for biomedical applications aimed at improving the technique of noninvasive detection of melanoma lesions.

  10. Scanning quantum decoherence microscopy.

    Science.gov (United States)

    Cole, Jared H; Hollenberg, Lloyd C L

    2009-12-09

    The use of qubits as sensitive nanoscale magnetometers has been studied theoretically and recently demonstrated experimentally. In this paper we propose a new concept, in which a scanning two-state quantum system is used to probe a sample through the subtle effects of decoherence. Mapping both the Hamiltonian and decoherence properties of a qubit simultaneously provides a unique image of the magnetic (or electric) field properties at the nanoscale. The resulting images are sensitive to the temporal as well as spatial variation in the fields created by the sample. As examples we theoretically study two applications; one from condensed matter physics, the other biophysics. The individual components required to realize the simplest version of this device (characterization and measurement of qubits, nanoscale positioning) have already been demonstrated experimentally.

  11. Automatic Ultrasound Scanning

    DEFF Research Database (Denmark)

    Moshavegh, Ramin

    Medical ultrasound has been a widely used imaging modality in healthcare platforms for examination, diagnostic purposes, and for real-time guidance during surgery. However, despite the recent advances, medical ultrasound remains the most operator-dependent imaging modality, as it heavily relies...... on the user adjustments on the scanner interface to optimize the scan settings. This explains the huge interest in the subject of this PhD project entitled “AUTOMATIC ULTRASOUND SCANNING”. The key goals of the project have been to develop automated techniques to minimize the unnecessary settings...... on the scanners, and to improve the computer-aided diagnosis (CAD) in ultrasound by introducing new quantitative measures. Thus, four major issues concerning automation of the medical ultrasound are addressed in this PhD project. They touch upon gain adjustments in ultrasound, automatic synthetic aperture image...

  12. LANL Robotic Vessel Scanning

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Nels W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    Los Alamos National Laboratory in J-1 DARHT Operations Group uses 6ft spherical vessels to contain hazardous materials produced in a hydrodynamic experiment. These contaminated vessels must be analyzed by means of a worker entering the vessel to locate, measure, and document every penetration mark on the vessel. If the worker can be replaced by a highly automated robotic system with a high precision scanner, it will eliminate the risks to the worker and provide management with an accurate 3D model of the vessel presenting the existing damage with the flexibility to manipulate the model for better and more in-depth assessment.The project was successful in meeting the primary goal of installing an automated system which scanned a 6ft vessel with an elapsed time of 45 minutes. This robotic system reduces the total time for the original scope of work by 75 minutes and results in excellent data accumulation and transmission to the 3D model imaging program.

  13. GPR scan assessment

    Directory of Open Access Journals (Sweden)

    Abbas M. Abbas

    2015-06-01

    Full Text Available Mekaad Radwan monument is situated in the neighborhood of Bab Zuweila in the historical Cairo, Egypt. It was constructed at the middle XVII century (1635 AD. The building has a rectangle shape plan (13 × 6 m with the longitudinal sides approximately WNW-ESE. It comprises three storages namely; the ground floor; the opened floor (RADWAN Bench and the living floor with a total elevation of 15 m above the street level. The building suffers from severe deterioration phenomena with patterns of damage which have occurred over time. These deterioration and damages could be attributed to foundation problems, subsoil water and also to the earthquake that affected the entire Greater Cairo area in October 1992. Ground Penetrating Radar (GPR scan was accomplished against the walls of the opened floor (RADWAN Bench to evaluate the hazard impact on the walls textures and integrity. The results showed an anomalous feature through the southern wall of RADWAN Bench. A mathematical model has been simulated to confirm the obtained anomaly and the model response exhibited a good matching with the outlined anomaly.

  14. Concise Arm and Hand Rehabilitation Approach in Stroke (CARAS: A practical and evidence-based framework for clinical rehabilitation management

    Directory of Open Access Journals (Sweden)

    Johan A. Franck

    2015-10-01

    Full Text Available The volume of information on new treatment techniques supporting the restoration of arm-hand function (AHF and arm-hand skill performance (ASHP in stroke survivors overwhelms therapists in everyday clinical practice when choosing the appropriate therapy. The Concise Arm and Hand Rehabilitation Approach in Stroke (CARAS is designed for paramedical staff to structure and implement training of AHF and AHSP in stroke survivors. The CARAS is based on four constructs: (a stratification according to the severity of arm–hand impairment (using the Utrecht Arm/Hand -Test [UAT], (b the individual’s rehabilitation goals and concomitant potential rehabilitation outcomes, (c principles of self-efficacy, and (d possibilities to systematically incorporate (new technology and new evidence-based training elements swiftly. The framework encompasses three programs aimed at treating either the severely (UAT 0-1, moderately (UAT 2-3, or mildly (UAT 4-7 impaired arm-hand. Program themes are: taking care of the limb and prevention of complications (Program 1, task-oriented gross motor grip performance (Program 2, and functional AHSP training (Program 3. Each program is preceded and followed by an assessment. Training modularity facilitates rapid interchange/adaptation of sub-elements. Proof-of-principle in clinical rehabilitation has been established. The CARAS facilitates rapid structured design and provision of state-of-the-art AHF and ASHP treatment in stroke patients.

  15. Palladium(0)-Catalyzed Benzylic C(sp(3))-H Functionalization for the Concise Synthesis of Heterocycles and Its Applications.

    Science.gov (United States)

    Tsukano, Chihiro

    2017-01-01

    C-H functionalization reactions involve the activation of otherwise unreactive C-H bonds, and represent atom economical methods for the direct transformation of simple substrates to complex molecules. While transition metal-catalyzed C(sp(2))-H functionalization reactions are regularly used in synthesis, C(sp(3))-H functionalization is rarely applied to the synthesis of complex natural products because of the difficulties associated with controlling selectivity. With this in mind, we focused on the development of new palladium (Pd)(0)-catalyzed C(sp(3))-H functionalization reactions for the synthesis of complex molecules, resulting in several new methods capable of solving these problems. We initially developed a concise synthetic method for the facile construction of oxindoles and spirooxindoles via a Pd-catalyzed benzylic C(sp(3))-H functionalization reaction. This method was subsequently extended to the synthesis of various heterocycles, including 2-arylindoles, benzocarbazole, indolocarbazole, indoloquinazolinone, and indoloquinazolinedione, as well as the total synthesis of several pyrrolophenanthridine alkaloids without the need for any protecting groups. This method was also successfully applied to the synthesis of the right-hand fragment of benzohopane from tetrahydro-2H-fluorene, which was constructed by a Pd-catalyzed benzylic C(sp(3))-H functionalization. In this review, we provide a detailed discussion of our most recent investigations pertaining to Pd(0)-catalyzed benzylic C(sp(3))-H functionalization.

  16. Hyperchromatic laser scanning cytometry

    Science.gov (United States)

    Tárnok, Attila; Mittag, Anja

    2007-02-01

    In the emerging fields of high-content and high-throughput single cell analysis for Systems Biology and Cytomics multi- and polychromatic analysis of biological specimens has become increasingly important. Combining different technologies and staining methods polychromatic analysis (i.e. using 8 or more fluorescent colors at a time) can be pushed forward to measure anything stainable in a cell, an approach termed hyperchromatic cytometry. For cytometric cell analysis microscope based Slide Based Cytometry (SBC) technologies are ideal as, unlike flow cytometry, they are non-consumptive, i.e. the analyzed sample is fixed on the slide. Based on the feature of relocation identical cells can be subsequently reanalyzed. In this manner data on the single cell level after manipulation steps can be collected. In this overview various components for hyperchromatic cytometry are demonstrated for a SBC instrument, the Laser Scanning Cytometer (Compucyte Corp., Cambridge, MA): 1) polychromatic cytometry, 2) iterative restaining (using the same fluorochrome for restaining and subsequent reanalysis), 3) differential photobleaching (differentiating fluorochromes by their different photostability), 4) photoactivation (activating fluorescent nanoparticles or photocaged dyes), and 5) photodestruction (destruction of FRET dyes). With the intelligent combination of several of these techniques hyperchromatic cytometry allows to quantify and analyze virtually all components of relevance on the identical cell. The combination of high-throughput and high-content SBC analysis with high-resolution confocal imaging allows clear verification of phenotypically distinct subpopulations of cells with structural information. The information gained per specimen is only limited by the number of available antibodies and by sterical hindrance.

  17. New and concise syntheses of the bicyclic oxamazin core using an intramolecular nitroso Diels-Alder reaction and ring-closing olefin metathesis.

    Science.gov (United States)

    Watson, Kyle D; Carosso, Serena; Miller, Marvin J

    2013-01-18

    Herein two new and concise synthetic approaches for making an unsaturated bicyclic oxamazin core are reported. The first involves the use of an intramolecular Diels-Alder reaction to form both of the fused rings in one step. The second approach incorporates ring-closing olefin metathesis in the final step to form the second fused ring of the core. The scope of the second approach was also expanded further to afford larger ringed bicyclic systems.

  18. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1995-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in STM I, these studies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described in chapters on scanning force microscopy, magnetic force microscopy, and scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Together, the two volumes give a comprehensive account of experimental aspects of STM. They provide essential reading and reference material for all students and researchers involved in this field. In this second edition the text has been updated and new methods are discussed.

  19. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1992-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in Vol. I, these sudies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described inchapters on scanning force microscopy, magnetic force microscopy, scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Togehter, the two volumes give a comprehensive account of experimental aspcets of STM. They provide essentialreading and reference material for all students and researchers involvedin this field.

  20. Scanning Productivity in Interlibrary Loan

    Science.gov (United States)

    Pedersen, Wayne A.; Runestad, Anders

    2009-01-01

    The authors report findings of a research study conducted at the Iowa State University Library. Data was gathered on the scanning of library materials by students working in the Interlibrary Loan (ILL) unit. The goals of the study were fourfold: (1) Develop measures of scanning productivity in ILL, (2) Determine if it is more productive to scan…

  1. Scan converting video tape recorder

    Science.gov (United States)

    Holt, N. I. (Inventor)

    1971-01-01

    A video tape recorder is disclosed of sufficient bandwidth to record monochrome television signals or standard NTSC field sequential color at current European and American standards. The system includes scan conversion means for instantaneous playback at scanning standards different from those at which the recording is being made.

  2. Detectors for scanning video imagers

    Science.gov (United States)

    Webb, Robert H.; Hughes, George W.

    1993-11-01

    In scanning video imagers, a single detector sees each pixel for only 100 ns, so the bandwidth of the detector needs to be about 10 MHz. How this fact influences the choice of detectors for scanning systems is described here. Some important parametric quantities obtained from manufacturer specifications are related and it is shown how to compare detectors when specified quantities differ.

  3. Second Unusual Guidebook to Terrestrial Field Work Studies: Astronauts with Roving Vehicle, Robotic Rovers on Planetary Surfaces (Seventh Concise Atlas in the Solar System Series of Textbooks at Eötvös University, Hungary)

    Science.gov (United States)

    Mészáros, I.; Hargitai, H.; Horváth, A.; Kereszturi, A.; Sik, A.; Bérczi, Sz.

    2005-03-01

    Our new concise atlas of Solar System Environmental Studies shows a) Apollo's field works in lunar rock deserts, b) Lunokhod rovers' field works, c) Pathfinder's Sojourner's works around Sagan Station, and d) MER rovers' field works.

  4. Concise chemical thermodynamics

    CERN Document Server

    Peters, APH

    2010-01-01

    EnergyThe Realm of ThermodynamicsEnergy BookkeepingNature's Driving ForcesSetting the Scene: Basic IdeasSystem and SurroundingsFunctions of StateMechanical Work and Expanding GasesThe Absolute Temperature Scale Forms of Energy and Their Interconversion Forms of Renewable Energy Solar Energy Wind Energy Hydroelectric Power Geothermal Energy Biomass Energy References ProblemsThe First Law of Thermodynamics Statement of the First Law Reversible Expansion of an Ideal GasConstant-Volume ProcessesConstant-Pressure ProcessesA New Function: EnthalpyRelationship between ?H and ?UUses and Conventions of

  5. Bone Densitometry (Bone Density Scan)

    Science.gov (United States)

    ... back pain. if a DEXA scan gives borderline readings. top of page How should I prepare? On the day ... radiology protection organizations continually review and update the technique ... that those parts of a patient's body not being imaged receive minimal ...

  6. Concise Associated Symptoms Tracking scale: a brief self-report and clinician rating of symptoms associated with suicidality.

    Science.gov (United States)

    Trivedi, Madhukar H; Wisniewski, Stephen R; Morris, David W; Fava, Maurizio; Kurian, Benji T; Gollan, Jackie K; Nierenberg, Andrew A; Warden, Diane; Gaynes, Bradley N; Luther, James F; Rush, A John

    2011-06-01

    US Food and Drug Administration (FDA) warnings recommend monitoring negative symptoms associated with the initiation of antidepressant medications as these symptoms may interfere with full recovery and pose safety concerns. There is currently no brief, reliable rating instrument for assessing treatment-emergent, negative symptoms. We evaluated the psychometric properties of 2 versions of the newly developed 17-item Concise Associated Symptom Tracking (CAST) scale, the CAST Clinician Rating (CAST-C) and CAST Self-Rated (CAST-SR), which are brief instruments designed to measure the 5 relevant associated symptom domains (irritability, anxiety, mania, insomnia, and panic). The study enrolled 265 outpatients with major depressive disorder (MDD), from July 2007 through February 2008, into an 8-week, open-label trial with a selective serotonin reuptake inhibitor. Diagnosis of MDD was determined by the Psychiatric Diagnostic Screening questionnaire and an MDD checklist based on DSM-IV-TR criteria. Suicidality (suicidal ideation with associated behaviors) is 1 of 9 symptoms of MDD (depressed mood, loss of interest, appetite or weight change, sleep disturbance, reduced concentration or indecisiveness, fatigue or decreased energy, psychomotor agitation or retardation, feelings of worthlessness or excessive guilt). Psychometric evaluations were conducted on both versions of the CAST. Cronbach α was .80 (CAST-C) and .81 (CAST-SR). Factor analysis identified 5 factors for each scale: (1) irritability, (2) anxiety, (3) mania, (4) insomnia, and (5) panic. When the item that cross-loaded on 2 factors was eliminated, the 16-item solution had a better goodness of fit (CAST-C: 0.90 vs 0.87; CAST-SR: 0.88 vs 0.84). Cronbach α for the 16-item versions was .77 (CAST-C) and .78 (CAST-SR). The 5 associated CAST symptom domains correlated well with other standard measures of these domains. The 16-item CAST-C and CAST-SR demonstrated excellent psychometric properties. These are potentially

  7. Lidar arc scan uncertainty reduction through scanning geometry optimization

    Science.gov (United States)

    Wang, Hui; Barthelmie, Rebecca J.; Pryor, Sara C.; Brown, Gareth.

    2016-04-01

    Doppler lidars are frequently operated in a mode referred to as arc scans, wherein the lidar beam scans across a sector with a fixed elevation angle and the resulting measurements are used to derive an estimate of the n minute horizontal mean wind velocity (speed and direction). Previous studies have shown that the uncertainty in the measured wind speed originates from turbulent wind fluctuations and depends on the scan geometry (the arc span and the arc orientation). This paper is designed to provide guidance on optimal scan geometries for two key applications in the wind energy industry: wind turbine power performance analysis and annual energy production prediction. We present a quantitative analysis of the retrieved wind speed uncertainty derived using a theoretical model with the assumption of isotropic and frozen turbulence, and observations from three sites that are onshore with flat terrain, onshore with complex terrain and offshore, respectively. The results from both the theoretical model and observations show that the uncertainty is scaled with the turbulence intensity such that the relative standard error on the 10 min mean wind speed is about 30 % of the turbulence intensity. The uncertainty in both retrieved wind speeds and derived wind energy production estimates can be reduced by aligning lidar beams with the dominant wind direction, increasing the arc span and lowering the number of beams per arc scan. Large arc spans should be used at sites with high turbulence intensity and/or large wind direction variation.

  8. Evaluation of radiogallium-labeled, folate-embedded superparamagnetic nanoparticles in fibrosarcoma-bearing mice

    Directory of Open Access Journals (Sweden)

    Seyyedeh Leila Hosseini-Salekdeh

    2012-01-01

    Full Text Available Context: Elevated expression of the folate receptor (FR occurs in many human malignancies. Thus, folate targeting is widely utilized in drug delivery purposes specially using nano-radioactive agents. Aims: In this work, we report production and biological evaluation of gallium-67 labeled superparamagnetic iron oxide nanoparticles, embedded by folic acid ( 67 Ga-SPION-folate complex especially in tumor-bearing mice for tumor imaging studies. Settings and Design: The structure of SPION-folate was confirmed by X-ray diffraction (XRD, transmission electron microscopy (TEM and foureir transform infrared spectroscopy (FT-IR analyses. The radiolabeled SPION-folate formation was confirmed by instant thin layer chromatography (ITLC. Tumor induction was performed by the use of poly-aromatic hydrocarbon injection in rodents as reported previously. Materials and Methods: [ 67 Ga]-SPION-folate was shown to possess a particle size of ≈5-10 nm using instrumental methods followed by ITLC test. Biocompatibility of the compound was investigated using an 3-(4,5-Dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT assay followed by stability tests and tumor accumulation studies in fibrosarcoma-bearing mice after subcutaneous (s.c. application. Statistical Analysis Used: All values were expressed as mean ± standard deviation (mean ± SD and the data were compared using Student t-test. Statistical significance was defined as P95% radiochemical purity. Biodistribution studies demonstrated tumor:blood, tumor:bone and tumor:muscle ratios of 4.23, 4.98 and 11.54 respectively after 24 h. Conclusions: Due to the nano-scale size and high-penetrative property of the developed folate-containing nano-complex, this system can be an interesting drug delivery modality with therapeutic applications and folate receptor-targeting behavior, while possessing paramagnetic properties for thermotherapy.

  9. Obstacles to Industrial Implementation of Scanning Systems

    Science.gov (United States)

    Anders Astrom; Olog Broman; John Graffman; Anders Gronlund; Armas Jappinene; Jari Luostarinen; Jan Nystrom; Daniel L. Schmoldt

    1998-01-01

    Initially the group discussed what is meant by scanning systems. An operational definition was adopted to consider scanning system in the current context to be nontraditional scanning. Where, traditional scanning is defined as scanning that has been industrially operational and relatively common for several years-a mature technology. For example,...

  10. Concise Total Synthesis of Trichodermamides A, B, and C Enabled by an Efficient Construction of the 1,2-Oxazadecaline Core.

    Science.gov (United States)

    Mfuh, Adelphe M; Zhang, Yu; Stephens, David E; Vo, Anh X T; Arman, Hadi D; Larionov, Oleg V

    2015-07-01

    We report herein a facile and efficient method of the construction of the cis-1,2-oxazadecaline system, distinctive of (pre)trichodermamides, aspergillazine A, gliovirin, and FA-2097. The formation of the 1,2-oxazadecaline core was accomplished by a 1,2-addition of an αC-lithiated O-silyl ethyl pyruvate oxime to benzoquinone, which is followed by an oxa-Michael ring-closure. The method was successfully applied to the concise total synthesis of trichodermamide A (in gram quantities) and trichodermamide B, as well as the first synthesis of trichodermamide C.

  11. Remotely scanned multiphoton temporal focusing by axial grism scanning.

    Science.gov (United States)

    Dana, Hod; Shoham, Shy

    2012-07-15

    A simple technique for remote scanning of the focal plane in temporal focusing multiphoton microscopy is demonstrated both theoretically and experimentally. A new on-axis light propagation optical setup design enables this scanning, which was considered not feasible in previous studies. The focal plane is axially displaced by the movement of a remote optical device, consisting of a double prism grating, and optionally a cylindrical lens. The displacement is linear, and its slope is inversely proportional to the square of the optical system's magnification.

  12. The boundary-scan handbook

    CERN Document Server

    Parker, Kenneth P

    2016-01-01

    Aimed at electronics industry professionals, this 4th edition of the Boundary Scan Handbook describes recent changes to the IEEE1149.1 Standard Test Access Port and Boundary-Scan Architecture. This updated edition features new chapters on the possible effects of the changes on the work of the practicing test engineers and the new 1149.8.1 standard. Anyone needing to understand the basics of boundary scan and its practical industrial implementation will need this book. Provides an overview of the recent changes to the 1149.1 standard and the effect of the changes on the work of test engineers;   Explains the new IEEE 1149.8.1 subsidiary standard and applications;   Describes the latest updates on the supplementary IEEE testing standards. In particular, addresses: IEEE Std 1149.1                      Digital Boundary-Scan IEEE Std 1149.4                      Analog Boundary-Scan IEEE Std 1149.6                      Advanced I/O Testing IEEE Std 1149.8.1           �...

  13. Nanobits: customizable scanning probe tips

    DEFF Research Database (Denmark)

    Kumar, Rajendra; Shaik, Hassan Uddin; Sardan Sukas, Özlem

    2009-01-01

    We present here a proof-of-principle study of scanning probe tips defined by planar nanolithography and integrated with AFM probes using nanomanipulation. The so-called 'nanobits' are 2-4 mu m long and 120-150 nm thin flakes of Si3N4 or SiO2, fabricated by electron beam lithography and standard...... silicon processing. Using a microgripper they were detached from an array and fixed to a standard pyramidal AFM probe or alternatively inserted into a tipless cantilever equipped with a narrow slit. The nanobit-enhanced probes were used for imaging of deep trenches, without visible deformation, wear...... or dislocation of the tips of the nanobit after several scans. This approach allows an unprecedented freedom in adapting the shape and size of scanning probe tips to the surface topology or to the specific application....

  14. Footwear scanning systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Justin L.; McMakin, Douglas L.; Sheen, David M.; Tedeschi, Jonathan R.

    2017-07-25

    Methods and apparatus for scanning articles, such as footwear, to provide information regarding the contents of the articles are described. According to one aspect, a footwear scanning system includes a platform configured to contact footwear to be scanned, an antenna array configured to transmit electromagnetic waves through the platform into the footwear and to receive electromagnetic waves from the footwear and the platform, a transceiver coupled with antennas of the antenna array and configured to apply electrical signals to at least one of the antennas to generate the transmitted electromagnetic waves and to receive electrical signals from at least another of the antennas corresponding to the electromagnetic waves received by the others of the antennas, and processing circuitry configured to process the received electrical signals from the transceiver to provide information regarding contents within the footwear.

  15. RPC High Voltage Scan 2015

    CERN Document Server

    CMS Collaboration

    2016-01-01

    During the LS1 the CMS RPC system has been upgraded with 144 new chambers installed on the forth endcap stations. An annual HV (RPC efficiency vs HV) scan for the entire RPC system has been performed during the Run2 data taking period in 2015. The obtained results have been compared to the HV scans performed in 2011 and 2012. No significant differences are observed in the compared results. The optimal HV working points for the newly installed chambers have been evaluated for the first time with collision data.

  16. Pyrophosphate heart scan in cardiomyopathies

    Energy Technology Data Exchange (ETDEWEB)

    Duska, F.; Novak, J.; Kubicek, J.; Vizda, J.; Kafka, P.; Blaha, V.; Nesvadba, Z.; Zdansky, P. (Karlova Univ., Hradec Kralove (Czechoslovakia). Lekarska Fakulta)

    1982-01-01

    Scintigraphic examination of the heart with pyrophosphate labelled sup(99m)Tc was made in 26 patients with cardiomyopathies of different etiology. From a total of 11 children with secondary affections of the myocardium in myodystrophia musculorum progressiva a positive scintigraphic finding was only obtained in two cases. 12 patients with primary non-obstructive cardiomyopathies the scan was positive in nine cases. One positive scintigraphic finding was shown in examinating three patients with obstructive cardiomyopathies (subvalvular aortic stenosis). The positive scan suggests acute progress of the pathological process in the heart.

  17. Integrated micromachined scanning display systems

    Science.gov (United States)

    Hagelin, Paul M.; Krishnamoorthy, Uma; Conant, Robert A.; Muller, Richard S.; Lau, Kam Y.; Solgaard, Olav

    1999-07-01

    We describe a raster-scanning display system comprised of two tilt-up micromachined polysilicon mirrors that rotate about orthogonal axes. We have demonstrated a resolution of 102 X 119 pixels. The optical efficiency of our two- mirror micro-optical raster-scanning system is comparable to that of micromachined display systems developed by Texas Instruments and Silicon Light Machines. Ease of integration with on-chip light sources and lenses has the potential to reduce packaging size, complexity and cost of the display system and makes it well suited for head-mounted display applications.

  18. Infrared Scanning For Electrical Maintenance

    Science.gov (United States)

    Eisenbath, Steven E.

    1983-03-01

    Given the technological age that we have now entered, the purpose of this paper is to relate how infrared scanning can be used for an electrical preventative maintenance program. An infrared scanner is able to produce an image because objects give off infrared radiation in relationship to their temperature. Most electrical problems will show up as an increase in temperature, thereby making the infrared scanner a useful preventative maintenance tool. Because of the sensitivity of most of the scanners, .1 to .2 of a degree, virtually all electrical problems can be pinpointed long before they become a costly failure. One of the early uses of infrared scanning was to check the power company's electrical distribution system. Most of this was performed via aircraft or truck mounted scanning devices which necessitated its semi-permanent mounting. With the advent of small hand held infrared imagers, along with more portability of the larger systems, infrared scanning has gained more popularity in checking electrical distribution systems. But the distribution systems are now a scaled down model, mainly the in-plant electrical systems. By in-plant, I mean any distribution of electricity; once it leaves the power company's grid. This can be in a hospital, retail outlet, warehouse or manufacturing facility.

  19. Vacuum scanning capillary photoemission microscopy

    DEFF Research Database (Denmark)

    Aseyev, S.A.; Cherkun, A P; Mironov, B N

    2017-01-01

    We demonstrate the use of a conical capillary in a scanning probe microscopy for surface analysis. The probe can measure photoemission from a substrate by transmitting photoelectrons along the capillary as a function of probe position. The technique is demonstrated on a model substrate consisting...

  20. High Resolution Scanning Ion Microscopy

    NARCIS (Netherlands)

    Castaldo, V.

    2011-01-01

    The structure of the thesis is the following. The first chapter is an introduction to scanning microscopy, where the path that led to the Focused Ion Beam (FIB) is described and the main differences between electrons and ion beams are highlighted. Chapter 2 is what is normally referred to (which I

  1. Phase sensitive scanning optical microscope

    Energy Technology Data Exchange (ETDEWEB)

    Jungerman, R.L.; Hobbs, P.C.D.; Kino, G.S.

    1984-10-15

    An electronically scanned optical microscope which quantitatively measures amplitude and phase is described. The system is insenstive to mechanical vibrations. The phase infromation makes it possible to measure surface height variations with an accuracy of better than 100 A and can also be used to improve the lateral resolution.

  2. Electronically-Scanned Pressure Sensors

    Science.gov (United States)

    Coe, C. F.; Parra, G. T.; Kauffman, R. C.

    1984-01-01

    Sensors not pneumatically switched. Electronic pressure-transducer scanning system constructed in modular form. Pressure transducer modules and analog to digital converter module small enough to fit within cavities of average-sized wind-tunnel models. All switching done electronically. Temperature controlled environment maintained within sensor modules so accuracy maintained while ambient temperature varies.

  3. Introduction to scanning tunneling microscopy

    CERN Document Server

    Chen, C Julian

    2008-01-01

    The scanning tunneling and the atomic force microscope, both capable of imaging individual atoms, were crowned with the Physics Nobel Prize in 1986, and are the cornerstones of nanotechnology today. This is a thoroughly updated version of this 'bible' in the field.

  4. Scanning Quantum Cryogenic Atom Microscope

    Science.gov (United States)

    Yang, Fan; Kollár, Alicia J.; Taylor, Stephen F.; Turner, Richard W.; Lev, Benjamin L.

    2017-03-01

    Microscopic imaging of local magnetic fields provides a window into the organizing principles of complex and technologically relevant condensed-matter materials. However, a wide variety of intriguing strongly correlated and topologically nontrivial materials exhibit poorly understood phenomena outside the detection capability of state-of-the-art high-sensitivity high-resolution scanning probe magnetometers. We introduce a quantum-noise-limited scanning probe magnetometer that can operate from room-to-cryogenic temperatures with unprecedented dc-field sensitivity and micron-scale resolution. The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) employs a magnetically levitated atomic Bose-Einstein condensate (BEC), thereby providing immunity to conductive and blackbody radiative heating. The SQCRAMscope has a field sensitivity of 1.4 nT per resolution-limited point (approximately 2 μ m ) or 6 nT /√{Hz } per point at its duty cycle. Compared to point-by-point sensors, the long length of the BEC provides a naturally parallel measurement, allowing one to measure nearly 100 points with an effective field sensitivity of 600 pT /√{Hz } for each point during the same time as a point-by-point scanner measures these points sequentially. Moreover, it has a noise floor of 300 pT and provides nearly 2 orders of magnitude improvement in magnetic flux sensitivity (down to 10-6 Φ0/√{Hz } ) over previous atomic probe magnetometers capable of scanning near samples. These capabilities are carefully benchmarked by imaging magnetic fields arising from microfabricated wire patterns in a system where samples may be scanned, cryogenically cooled, and easily exchanged. We anticipate the SQCRAMscope will provide charge-transport images at temperatures from room temperature to 4 K in unconventional superconductors and topologically nontrivial materials.

  5. Seismic scanning tunneling macroscope - Theory

    KAUST Repository

    Schuster, Gerard T.

    2012-09-01

    We propose a seismic scanning tunneling macroscope (SSTM) that can detect the presence of sub-wavelength scatterers in the near-field of either the source or the receivers. Analytic formulas for the time reverse mirror (TRM) profile associated with a single scatterer model show that the spatial resolution limit to be, unlike the Abbe limit of λ/2, independent of wavelength and linearly proportional to the source-scatterer separation as long as the point scatterer is in the near-field region; if the sub-wavelength scatterer is a spherical impedance discontinuity then the resolution will also be limited by the radius of the sphere. Therefore, superresolution imaging can be achieved as the scatterer approaches the source. This is analogous to an optical scanning tunneling microscope that has sub-wavelength resolution. Scaled to seismic frequencies, it is theoretically possible to extract 100 Hz information from 20 Hz data by imaging of near-field seismic energy.

  6. Scanning of Markov Random Processes

    Directory of Open Access Journals (Sweden)

    Gustav Cepciansky

    2003-01-01

    Full Text Available Function of most electronic devices is based on the microprocessor control. A microprocessor must scan and evaluate function of many controlled equipment that can be transformed into 2 statuses - "free" or "busy". Microprocessors in a digital exchange are the typical example of that. It can be said the microprocessors are in a discrete dialogue with the controlled parts. They ascertain in regular time intervals whether the status of the controlled equipment has changed. 1 or more "busy" statuses may exist in the same time. As the changes from "free" to "busy" and from "busy" to "free" occur randomly, the state of i busy statuses lasts for a random period too. If the changes have pro-perties of Markov process, the probability which each change will be detected with and hence the scanning rate needed can be derived.

  7. ceramics by differential scanning calorimetry

    Indian Academy of Sciences (India)

    Administrator

    YbxGd2–xZr2O7 (x = 0, 1, 2) ceramics were pressureless-sintered using ceramic powders acquired by chemical-coprecipitation and calcination methods. Heat capacities of YbxGd2–xZr2O7 were measured with a heat flux-type differential scanning calorimetry in the temperature range of 298–1200 K. At 298 K, the heat.

  8. A fluorescence scanning electron microscope

    OpenAIRE

    Kanemaru, Takaaki; Hirata, Kazuho; Takasu, Shin-ichi; Isobe, Shin-Ichiro; Mizuki, Keiji; Mataka, Shuntaro; Nakamura, Kei-ichiro

    2010-01-01

    Fluorescence techniques are widely used in biological research to examine molecular localization, while electron microscopy can provide unique ultrastructural information. To date, correlative images from both fluorescence and electron microscopy have been obtained separately using two different instruments, i.e. a fluorescence microscope (FM) and an electron microscope (EM). In the current study, a scanning electron microscope (SEM) (JEOL JXA8600 M) was combined with a fluorescence digital c...

  9. New Snail Mail Scanning Service

    CERN Multimedia

    2012-01-01

    Modernisation does not stop at the CERN postal service (GS/PS). “With more and more digitisation and the prevalence of e-mail throughout the site, we were hoping to provide more timely delivery of letters and make further saving in resources”, said Tueri Datta, head of GS/PS.   Instead of the standard delivery to your P.O. box, the CERN postal service will digitally scan all letters and books up to 100 pages on reception. These scans will subsequently be sent via e-mail to the corresponding recipient as PDF (Portable Data Format - you will need to install “Acrobat Reader” on your PC). Express mail will be handled with priority. Users without a valid CERN mailbox can register at mail.scan.service@cern.ch in order to have their letters read to them via the phone line (we are currently investigating whether we can use the voices of the last five DGs).   This service will start on 1st April 2012 on the Meyrin site and will gradually replace th...

  10. Simplified method of selective spleen scintigraphy with Tc-99m-labeled erythrocytes: clinical applications. Concise communication

    Energy Technology Data Exchange (ETDEWEB)

    Armas, R.R.; Thakur, M.L.; Gottschalk, A.

    1980-05-01

    We report our initial clinical experience with a simplified spleen-imaging technique that requires no red cell washing or special kits. Thirty minutes after an injection of ''cold'' pyrophosphate containing 0.5 mg of stannous chloride or fluoride, a blood sample is drawn, 2 mCi of pertechnetate (Tc-99m) are added, the sample is incubated at 49 to 50/sup 0/ for 35 min, and then reinjected into the patient. We have studied 13 patients with this technique, and have found it useful in the clarification of various questionable splenic abnormalities found on the sulfur colloid scan, as well as in the detection of splenosis.

  11. Concise synthesis of anti-HIV-1 active (+)-inophyllum B and (+)-calanolide A by application of (-)-quinine-catalyzed intramolecular oxo-Michael addition.

    Science.gov (United States)

    Sekino, Etsuko; Kumamoto, Takuya; Tanaka, Tomohiro; Ikeda, Tomoko; Ishikawa, Tsutomu

    2004-04-16

    (-)-Quinine-catalyzed intramolecular oxo-Michael addition (IMA) of 7-hydroxy-5-methoxy-8-tigloylcoumarins was developed for the enantioselective construction of 2,3-dimethyl-4-chromanone systems in the context of the asymmetric synthesis of anti-HIV-1 active Calophyllum coumarins. Combination of the IMA and MgI(2)-assisted demethylation of the 5-methoxy group along with isomerization of the formed chromanone systems as key steps successfully led to the concise synthesis of (+)-inophyllum B and (+)-calanolide A, possible candidates for AIDS drugs. Further examination of the asymmetric IMA with cinchona alkaloids lacking a methoxy group on the quinoline skeleton suggested the influence of the methoxy substituent on stereoselectivity at the stereogenic centers of the chromanone systems.

  12. Catalyst-Controlled Stereoselective Olefin Metathesis as a Principal Strategy in Multi-Step Synthesis Design. A Concise Route to (+)-Neopeltolide**

    Science.gov (United States)

    Yu, Miao; Schrock, Richard R.

    2014-01-01

    Mo-, W- and Ru-based complexes that control the stereochemical outcome of olefin metathesis reactions have been recently introduced. However, the complementary nature of these systems through their combined use in multistep complex molecule synthesis has not been illustrated. Here, we disclose a concise diastereo- and enantioselective route that furnishes the anti-proliferative natural product neopeltolide. Catalytic transformations are employed to address every stereochemical issue. Among the featured processes are an enantioselective ring-opening/cross-metathesis promoted by a Mo monopyrrolide aryloxide (MAP) complex and a macrocyclic ring-closing metathesis affording a trisubstituted alkene catalyzed by a Mo bis-aryloxide species. Furthermore, Z-selective cross-metathesis reactions, facilitated by Mo and Ru complexes, have been employed in stereoselective synthesis of the acyclic dienyl moiety of the target molecule. PMID:25377347

  13. ABS: Sequence alignment by scanning

    KAUST Repository

    Bonny, Mohamed Talal

    2011-08-01

    Sequence alignment is an essential tool in almost any computational biology research. It processes large database sequences and considered to be high consumers of computation time. Heuristic algorithms are used to get approximate but fast results. We introduce fast alignment algorithm, called Alignment By Scanning (ABS), to provide an approximate alignment of two DNA sequences. We compare our algorithm with the well-known alignment algorithms, the FASTA (which is heuristic) and the \\'Needleman-Wunsch\\' (which is optimal). The proposed algorithm achieves up to 76% enhancement in alignment score when it is compared with the FASTA Algorithm. The evaluations are conducted using different lengths of DNA sequences. © 2011 IEEE.

  14. Scanning mirror for infrared sensors

    Science.gov (United States)

    Anderson, R. H.; Bernstein, S. B.

    1972-01-01

    A high resolution, long life angle-encoded scanning mirror, built for application in an infrared attitude sensor, is described. The mirror uses a Moire' fringe type optical encoder and unique torsion bar suspension together with a magnetic drive to meet stringent operational and environmental requirements at a minimum weight and with minimum power consumption. Details of the specifications, design, and construction are presented with an analysis of the mirror suspension that allows accurate prediction of performance. The emphasis is on mechanical design considerations, and brief discussions are included on the encoder and magnetic drive to provide a complete view of the mirror system and its capabilities.

  15. Effectiveness and usability of Scanning Wizard software: a tool for enhancing switch scanning.

    Science.gov (United States)

    Koester, Heidi Horstmann; Simpson, Richard C

    2017-11-24

    Scanning Wizard software helps scanning users improve the setup of their switch and scanning system. This study evaluated Scanning Wizard's effectiveness and usability. Ten people who use switch scanning and ten practitioners used Scanning Wizard in the initial session. Usability was high, based on survey responses averaging over 4.5 out of 5, and qualitative feedback was very positive. Five switch users were able to complete the multi-week protocol, using settings on their own scanning system that were recommended from the Scanning Wizard session. Using these revised settings, text entry rates improved by an average of 71%, ranging from 29% to 172% improvement. Results suggest that Scanning Wizard is a useful tool for improving the configuration of scanning systems for people who use switch scanning to communicate. Implications for Rehabilitation Some individuals with severe physical impairments use switch scanning for spoken and written communication. Scanning Wizard software helps scanning users improve the setup of their switch and scanning system. This study demonstrated high usability of Scanning Wizard (with 10 switch userpractitioner teams) and increased text entry rate by an average of 71% (for five switch users). Results suggest that Scanning Wizard is a useful tool for improving the configuration of scanning systems for people who use switch scanning to communicate.

  16. Multifunctional scanning ion conductance microscopy.

    Science.gov (United States)

    Page, Ashley; Perry, David; Unwin, Patrick R

    2017-04-01

    Scanning ion conductance microscopy (SICM) is a nanopipette-based technique that has traditionally been used to image topography or to deliver species to an interface, particularly in a biological setting. This article highlights the recent blossoming of SICM into a technique with a much greater diversity of applications and capability that can be used either standalone, with advanced control (potential-time) functions, or in tandem with other methods. SICM can be used to elucidate functional information about interfaces, such as surface charge density or electrochemical activity (ion fluxes). Using a multi-barrel probe format, SICM-related techniques can be employed to deposit nanoscale three-dimensional structures and further functionality is realized when SICM is combined with scanning electrochemical microscopy (SECM), with simultaneous measurements from a single probe opening up considerable prospects for multifunctional imaging. SICM studies are greatly enhanced by finite-element method modelling for quantitative treatment of issues such as resolution, surface charge and (tip) geometry effects. SICM is particularly applicable to the study of living systems, notably single cells, although applications extend to materials characterization and to new methods of printing and nanofabrication. A more thorough understanding of the electrochemical principles and properties of SICM provides a foundation for significant applications of SICM in electrochemistry and interfacial science.

  17. Schistosomiasis collection at NHM (SCAN

    Directory of Open Access Journals (Sweden)

    Emery Aidan M

    2012-09-01

    Full Text Available Abstract Background The Natural History Museum (NHM is developing a repository for schistosomiasis-related material, the Schistosomiasis Collection at NHM (SCAN as part of its existing Wolfson Wellcome Biomedical Laboratory (WWBL. This is timely because a major research and evaluation effort to understand control and move towards elimination of schistosomiasis in Africa has been initiated by the Schistosomiasis Consortium for Operational Research and Evaluation (SCORE, resulting in the collection of many important biological samples, including larval schistosomes and snails. SCAN will collaborate with a number of research groups and control teams and the repository will acquire samples relevant to both immediate and future research interest. The samples collected through ongoing research and field activities, WWBL’s existing collections, and other acquisitions will be maintained over the long term and made available to the global research community for approved research purposes. Goals include: · Consolidation of the existing NHM schistosome and snail collections and transfer of specimens into suitable long-term storage systems for DNA retrieval, · Long-term and stable storage of specimens collected as part of on going field programmes initially in Africa especially relating to the SCORE research programmes, · Provision of access to snail and schistosome collections for approved research activities.

  18. 3D Scanning technology for offshore purposes

    DEFF Research Database (Denmark)

    Christoffersen, Morten Thoft

    2005-01-01

    New scanning technology makes for construction of precision 3D models of production plants and offshore production facilities......New scanning technology makes for construction of precision 3D models of production plants and offshore production facilities...

  19. CDMP Scan Task Production Flow Sheets

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Climate Database Modernization Program contractor documentation of batches scanned. Details include the name of the operator, time/date of scans, duplicates,...

  20. Knowledge Discovery of Port Scans from Darknet

    OpenAIRE

    Lagraa, Sofiane; Francois, Jerome

    2017-01-01

    International audience; Port scanning is widely used in Internet prior for attacks in order to identify accessible and potentially vulnerable hosts. In this work, we propose an approach that allows to discover port scanning behavior patterns and group properties of port scans. This approach is based on graph modelling and graph mining. It provides to security analysts relevant information of what services are jointly targeted, and the relationship of the scanned ports. This is helpful to asse...

  1. Parallel line scanning ophthalmoscope for retinal imaging

    NARCIS (Netherlands)

    Vienola, Kari V.; Damodaran, Mathi; Braaf, Boy; Vermeer, Koenraad A.; de Boer, Johannes F.

    2016-01-01

    Purpose: To visualize retinal structures using a newly developed parallel line scanning ophthalmoscope (PLSO). Methods: A PLSO was built using a digital micromirror device (DMD) instead of traditional scanning mirrors to scan lines over the field of view (FOV). The DMD consists of 912 × 1140

  2. Suspension system for gimbal supported scanning payloads

    Science.gov (United States)

    Polites, Michael E.

    1995-03-01

    Gimballed scanning devices or instruments are the subject of this invention. Scanning is an important aspect of space science. To achieve a scan pattern some means must be provided which impart to the payload an oscillatory motion. Various forms of machines have been employed for controllably conferring on scanning instruments predetermined scan patterns. They include control moment gyroscopes, reaction wheels, torque motors, reaction control systems, and the like. But rotating unbalanced mass (RUM) devices are a new and efficient way to generate scans in gimballed payloads. RUM devices are superior to previous scanning apparatus, but they require power consuming and frequently complex auxiliary control systems to position and reposition the particular scan pattern relative to a target or a number of targets. Herein the control system is simplified. The most frequently employed method for achieving the various scan patterns is to gimbal the scanning device. Gimbals are suspended in such a way that they can be activated to generate the scan pattern. The suspension means described is for payloads supported in gimbals wherein the payload rotation is restricted by a flex pivot so that the payload oscillates, thereby moving in a scan pattern.

  3. Getting a CAT Scan (For Kids)

    Science.gov (United States)

    ... Too Tall or Too Short Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for ... what's going on inside your body. The scan itself is painless. All you'll need to ...

  4. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Too Tall or Too Short Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for ... what's going on inside your body. The scan itself is painless. All you'll need to ...

  5. QUANTITATIVE CONFOCAL LASER SCANNING MICROSCOPY

    Directory of Open Access Journals (Sweden)

    Merete Krog Raarup

    2011-05-01

    Full Text Available This paper discusses recent advances in confocal laser scanning microscopy (CLSM for imaging of 3D structure as well as quantitative characterization of biomolecular interactions and diffusion behaviour by means of one- and two-photon excitation. The use of CLSM for improved stereological length estimation in thick (up to 0.5 mm tissue is proposed. The techniques of FRET (Fluorescence Resonance Energy Transfer, FLIM (Fluorescence Lifetime Imaging Microscopy, FCS (Fluorescence Correlation Spectroscopy and FRAP (Fluorescence Recovery After Photobleaching are introduced and their applicability for quantitative imaging of biomolecular (co-localization and trafficking in live cells described. The advantage of two-photon versus one-photon excitation in relation to these techniques is discussed.

  6. Scanning strategies for imaging arrays

    Science.gov (United States)

    Kovács, Attila

    2008-07-01

    Large-format (sub)millimeter wavelength imaging arrays are best operated in scanning observing modes rather than traditional position-switched (chopped) modes. The choice of observing mode is critical for isolating source signals from various types of noise interference, especially for ground-based instrumentation operating under a bright atmosphere. Ideal observing strategies can combat 1/f noise, resist instrumental defects, sensitively recover emission on large scales, and provide an even field coverage - all under feasible requirements of telescope movement. This work aims to guide the design of observing patterns that maximize scientific returns. It also compares some of the popular choices of observing modes for (sub)millimeter imaging, such as random, Lissajous, billiard, spiral, On-The-Fly (OTF), DREAM, chopped and stare patterns. Many of the conclusions are also applicable other imaging applications and imaging in one dimension (e.g. spectroscopic observations).

  7. Scanning laser polarimetry in glaucoma.

    Science.gov (United States)

    Dada, Tanuj; Sharma, Reetika; Angmo, Dewang; Sinha, Gautam; Bhartiya, Shibal; Mishra, Sanjay K; Panda, Anita; Sihota, Ramanjit

    2014-11-01

    Glaucoma is an acquired progressive optic neuropathy which is characterized by changes in the optic nerve head and retinal nerve fiber layer (RNFL). White-on-white perimetry is the gold standard for the diagnosis of glaucoma. However, it can detect defects in the visual field only after the loss of as many as 40% of the ganglion cells. Hence, the measurement of RNFL thickness has come up. Optical coherence tomography and scanning laser polarimetry (SLP) are the techniques that utilize the evaluation of RNFL for the evaluation of glaucoma. SLP provides RNFL thickness measurements based upon the birefringence of the retinal ganglion cell axons. We have reviewed the published literature on the use of SLP in glaucoma. This review elucidates the technological principles, recent developments and the role of SLP in the diagnosis and monitoring of glaucomatous optic neuropathy, in the light of scientific evidence so far.

  8. UAVSAR Active Electronically Scanned Array

    Science.gov (United States)

    Sadowy, Gregory, A.; Chamberlain, Neil F.; Zawadzki, Mark S.; Brown, Kyle M.; Fisher, Charles D.; Figueroa, Harry S.; Hamilton, Gary A.; Jones, Cathleen E.; Vorperian, Vatche; Grando, Maurio B.

    2011-01-01

    The Uninhabited Airborne Vehicle Synthetic Aperture Radar (UAVSAR) is a pod-based, L-band (1.26 GHz), repeatpass, interferometric, synthetic aperture radar (InSAR) used for Earth science applications. Repeat-pass interferometric radar measurements from an airborne platform require an antenna that can be steered to maintain the same angle with respect to the flight track over a wide range of aircraft yaw angles. In order to be able to collect repeat-pass InSAR data over a wide range of wind conditions, UAVSAR employs an active electronically scanned array (AESA). During data collection, the UAVSAR flight software continuously reads the aircraft attitude state measured by the Embedded GPS/INS system (EGI) and electronically steers the beam so that it remains perpendicular to the flight track throughout the data collection

  9. Scanning ARM Cloud Radar Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Widener, K; Bharadwaj, N; Johnson, K

    2012-06-18

    The scanning ARM cloud radar (SACR) is a polarimetric Doppler radar consisting of three different radar designs based on operating frequency. These are designated as follows: (1) X-band SACR (X-SACR); (2) Ka-band SACR (Ka-SACR); and (3) W-band SACR (W-SACR). There are two SACRs on a single pedestal at each site where SACRs are deployed. The selection of the operating frequencies at each deployed site is predominantly determined by atmospheric attenuation at the site. Because RF attenuation increases with atmospheric water vapor content, ARM's Tropical Western Pacific (TWP) sites use the X-/Ka-band frequency pair. The Southern Great Plains (SGP) and North Slope of Alaska (NSA) sites field the Ka-/W-band frequency pair. One ARM Mobile Facility (AMF1) has a Ka/W-SACR and the other (AMF2) has a X/Ka-SACR.

  10. Scanning Electrochemical Microscopy in Neuroscience

    Science.gov (United States)

    Schulte, Albert; Nebel, Michaela; Schuhmann, Wolfgang

    2010-07-01

    This article reviews recent work involving the application of scanning electrochemical microscopy (SECM) to the study of individual cultured living cells, with an emphasis on topographical and functional imaging of neuronal and secretory cells of the nervous and endocrine system. The basic principles of biological SECM and associated negative amperometric-feedback and generator/collector-mode SECM imaging are discussed, and successful use of the methodology for screening soft and fragile membranous objects is outlined. The drawbacks of the constant-height mode of probe movement and the benefits of the constant-distance mode of SECM operation are described. Finally, representative examples of constant-height and constant-distance mode SECM on a variety of live cells are highlighted to demonstrate the current status of single-cell SECM in general and of SECM in neuroscience in particular.

  11. Transmittance measurement using scanning LED

    Science.gov (United States)

    Ping, Yao; Mohan, Rosmin Elsa; Lau, Gih-Keong; Asundi, Anand Krishna

    2017-06-01

    In order to measure the transmittance for a large field of view (FOV), a system based on scanning LED is developed. The system mainly consists of tunable LEDs, a glass diffuser and a camera. The LED panel would display different colors in the CIE color space. An algorithm of converting the light wavelength to the RGB values is adopted. The images are captured using a monochrome camera. Depending on the number of colors displayed, the transmittance map for the entire spread of visible colors can be determined. Results are compared with those measured through a spectrometer. The spectral transmittance for the two methods exhibit good similarity. The system provides a means of measuring transmittance with no moving parts and can be extended to other hyperspectral imaging applications.

  12. Scanning laser polarimetry in glaucoma

    Directory of Open Access Journals (Sweden)

    Tanuj Dada

    2014-01-01

    Full Text Available Glaucoma is an acquired progressive optic neuropathy which is characterized by changes in the optic nerve head and retinal nerve fiber layer (RNFL. White-on-white perimetry is the gold standard for the diagnosis of glaucoma. However, it can detect defects in the visual field only after the loss of as many as 40% of the ganglion cells. Hence, the measurement of RNFL thickness has come up. Optical coherence tomography and scanning laser polarimetry (SLP are the techniques that utilize the evaluation of RNFL for the evaluation of glaucoma. SLP provides RNFL thickness measurements based upon the birefringence of the retinal ganglion cell axons. We have reviewed the published literature on the use of SLP in glaucoma. This review elucidates the technological principles, recent developments and the role of SLP in the diagnosis and monitoring of glaucomatous optic neuropathy, in the light of scientific evidence so far.

  13. Scanning Probe Microscopy of Graphene

    Science.gov (United States)

    Tautz, Pamela

    2011-10-01

    Scanning tunneling microscopy has been used to study the unusual electronic properties of graphene. In an effort to support the graphene with minimal interaction with the substrate, we used a hexagonal boron nitride (hBN) substrate. To minimize contaminants between the CVD graphene and boron nitride, the graphene samples were cleaned with distilled water and isopropanol prior to transfer to hBN substrate. We have also examined the growth of graphene flakes by chemical vapor deposition. In particular, we examined the relationship between the orientations of the first and second layer of CVD grown graphene. We found the growth mechanism preferentially resulted in rotations of 9^o or less indicating flakes with first and second layers aligned.

  14. The utility of bone scans in rheumatology

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, I.; Dorai-Raj, A.; Khoo, K.; Tymans, K.; Brook, A. [The Canberra Hospital, Canberra, ACT, (Australia)

    1997-09-01

    Full text: Introduction: Bone scans are the commonest diagnostic imaging services requested by Australian rheumatologists. Medicare figures suggest that an average rheumatologist orders about $50 000 (AUS) of bone scans annually. Aims: To ascertain the reasons why rheumatologists request bone scans and how it affects their patient management. Methods: A two-part prospective survey was administered before and after every bone scan ordered by four rheumatologists over a six-month period in 1996. Results: A total of 136 bone scans were requested (66.2% whole body; 33.8% regional; 6% SPECT). The primary indications for scanning were (1) to confirm a clinical diagnosis (38%); (2) to exclude a diagnosis (34%); (3) to localize site of pain (17%); and (4) to assist in management (6%). The common diseases that rheumatologists were attempting to confirm/exclude with bone scanning were inflammatory arthritis, malignancy, and fracture. However, the commonest provisional and final diagnosis was soft tissue rheumatism (18%) followed by inflammatory arthritis (15%) and osteoarthritis (11%). In 24% of patients with a provisional diagnosis of soft tissue rheumatism the diagnosis was changed by the bone scan. The scan was successful in excluding a diagnosis in 88 per cent where this was the primary indication for the test. It was successful in confirming a diagnosis in 79 per cent where this was the primary indication. In 32 per cent the bone scan altered the clinical diagnosis and in 43 per cent it altered management. The bone scan result prevented further investigations in 60 per cent. Conclusions: The commonest pre-scan and post-scan diagnosis is soft tissue rheumatism. Rheumatologists predominantly request bone scanning to confirm or exclude their clinical suspicion of inflammatory arthritis, malignancy, and fracture. Bone scans were successful in achieving these objectives in at least 79 per cent of cases.

  15. Spiral scanning method for atomic force microscopy.

    Science.gov (United States)

    Hung, Shao-Kang

    2010-07-01

    A spiral scanning method is proposed for atomic force microscopy with thoroughgoing analysis and implementation. Comparing with the traditional line-by-line scanning method, the spiral scanning method demonstrates higher imaging speed, minor image distortion, and lower acceleration, which can damage the piezoelectric scanner. Employing the spiral scanning method to replace the line-by-line scanning method, the experiment shows that the time to complete an imaging cycle can be reduced from 800 s to 314 s without sacrificing the image resolution.

  16. Examples of geodiversity - biodiversity interactions in the concise guide Inspiration Treasure House Earth, a tool for spatial planning with geodiversity and geoheritage at community level

    Science.gov (United States)

    van den Ancker, Hanneke; Jungerius, Pieter Dirk; van der Graaff, Evert; de Groof, Arthur; Doornbos, Gerard

    2014-05-01

    SIKB is a Dutch network organisation, set up to guarantee a minimum quality of soil management. The network encompasses both the private and the public sector. Their activities include the development of decision-making procedures and rendering of services for soil remediation and soil handling, i.a. through standardisation and certification. Each year SIKB produces concise hand-outs to assist and improve soil management. In 2000 the Dutch Ministry of Agriculture then responsible for earth heritage management, commissioned the Stichting Geomorfologie & Landschap to find out how geoheritage and geodiversity were cared for at the community level. The conclusion was that concern for geomorphology, geology, soil and their importance for landscape management and spatial planning was minimal in most Dutch communities. They were only mentioned in the descriptive paragraphs of the local community plan, often very short and using complex terminology not to be understood by any community member. Only in few communities it had resulted in geoheritage protection or attention for preserving the geodiversity of the area. Therefore, in 2007, SIKB and Geoheritage NL produced a hand-out to improve attention for geoheritage and geodiversity at the level of the local community. They produced a concise guide to get geoheritage and geodiversity within the different levels of the spatial plan of the local communities, then called bestemmingsplan now named structuurplan. This hand-out was a success: it had four re-prints and people are still interested in receiving a copy, although it is out of print. Yet, those working with it explained in a special meeting to evaluate the hand-out that it was too thorough a product to inspire decision makers and their colleagues in the local community. Apart from this, SIKB preferred not to make a reprint, but to come with a new product to revive attention. In 2013 we started to develop a hand-out which focusses on examples clarifying why attention for

  17. Performance scan thermal climate. Assessment of the energy performance level; Performance scan thermisch klimaat. Beoordeling energieprestatieniveau

    Energy Technology Data Exchange (ETDEWEB)

    Rouleaux, W. [DHV Bouw en Industrie, Amersfoort (Netherlands)

    2004-11-01

    By means of the performance scan the indoor climate and the energetic performance level of a building can be assessed. The most important outcome of the scan is increase of the productivity. [Dutch] Met de performance scan kan het binnenklimaat en het energetisch prestatieniveau van een gebouw worden beoordeeld. De belangrijkste uitkomst van de scan is verhoging van de productiviteit.

  18. Scanning electron microscopy of bone.

    Science.gov (United States)

    Boyde, Alan

    2012-01-01

    This chapter described methods for Scanning Electron Microscopical imaging of bone and bone cells. Backscattered electron (BSE) imaging is by far the most useful in the bone field, followed by secondary electrons (SE) and the energy dispersive X-ray (EDX) analytical modes. This chapter considers preparing and imaging samples of unembedded bone having 3D detail in a 3D surface, topography-free, polished or micromilled, resin-embedded block surfaces, and resin casts of space in bone matrix. The chapter considers methods for fixation, drying, looking at undersides of bone cells, and coating. Maceration with alkaline bacterial pronase, hypochlorite, hydrogen peroxide, and sodium or potassium hydroxide to remove cells and unmineralised matrix is described in detail. Attention is given especially to methods for 3D BSE SEM imaging of bone samples and recommendations for the types of resin embedding of bone for BSE imaging are given. Correlated confocal and SEM imaging of PMMA-embedded bone requires the use of glycerol to coverslip. Cathodoluminescence (CL) mode SEM imaging is an alternative for visualising fluorescent mineralising front labels such as calcein and tetracyclines. Making spatial casts from PMMA or other resin embedded samples is an important use of this material. Correlation with other imaging means, including microradiography and microtomography is important. Shipping wet bone samples between labs is best done in glycerol. Environmental SEM (ESEM, controlled vacuum mode) is valuable in eliminating -"charging" problems which are common with complex, cancellous bone samples.

  19. Advanced oxidation scanning probe lithography

    Science.gov (United States)

    Ryu, Yu K.; Garcia, Ricardo

    2017-04-01

    Force microscopy enables a variety of approaches to manipulate and/or modify surfaces. Few of those methods have evolved into advanced probe-based lithographies. Oxidation scanning probe lithography (o-SPL) is the only lithography that enables the direct and resist-less nanoscale patterning of a large variety of materials, from metals to semiconductors; from self-assembled monolayers to biomolecules. Oxidation SPL has also been applied to develop sophisticated electronic and nanomechanical devices such as quantum dots, quantum point contacts, nanowire transistors or mechanical resonators. Here, we review the principles, instrumentation aspects and some device applications of o-SPL. Our focus is to provide a balanced view of the method that introduces the key steps in its evolution, provides some detailed explanations on its fundamentals and presents current trends and applications. To illustrate the capabilities and potential of o-SPL as an alternative lithography we have favored the most recent and updated contributions in nanopatterning and device fabrication.

  20. Tandem catalysis in domino olefin cross-metathesis/intramolecular oxa-conjugate cyclization: concise synthesis of 2,6-cis-substituted tetrahydropyran derivatives.

    Science.gov (United States)

    Fuwa, Haruhiko; Noguchi, Takuma; Noto, Kenkichi; Sasaki, Makoto

    2012-10-28

    Herein, we describe the concise synthesis of 2,6-cis-substituted tetrahydropyran derivatives based on a domino olefin cross-metathesis/intramolecular oxa-conjugate cyclization (CM/IOCC) reaction. We have found that the domino CM/IOCC of δ-hydroxy olefins with α,β-unsaturated carbonyl compounds (e.g., trans-crotonaldehyde or N-acryloyl-2,5-dimethylpyrrole) could be efficiently achieved in the presence of the second-generation Hoveyda-Grubbs catalyst under elevated temperature conditions, directly affording 2,6-cis-substituted tetrahydropyrans in excellent yields with synthetically useful diastereoselectivity ("auto-tandem catalysis"). In addition, we have found that the domino CM/IOCC of δ-hydroxy olefins with α,β-unsaturated carbonyl compounds could be achieved simply by performing CM in the presence of a Brønsted acid in CH(2)Cl(2) at 25-35 °C, which delivered 2,6-cis-substituted tetrahydropyrans in good yields with excellent diastereoselectivity ("orthogonal-tandem catalysis"). To understand the mechanism of auto-tandem catalysis in the domino CM/IOCC reaction, we have investigated the role of ruthenium hydride complexes in the IOCC of a ζ-hydroxy α,β-unsaturated ketone as a model case.

  1. Concise Review: Heteroplasmic Mitochondrial DNA Mutations and Mitochondrial Diseases: Toward iPSC-Based Disease Modeling, Drug Discovery, and Regenerative Therapeutics.

    Science.gov (United States)

    Hatakeyama, Hideyuki; Goto, Yu-Ichi

    2016-04-01

    Mitochondria contain multiple copies of their own genome (mitochondrial DNA; mtDNA). Once mitochondria are damaged by mutant mtDNA, mitochondrial dysfunction is strongly induced, followed by symptomatic appearance of mitochondrial diseases. Major genetic causes of mitochondrial diseases are defects in mtDNA, and the others are defects of mitochondria-associating genes that are encoded in nuclear DNA (nDNA). Numerous pathogenic mutations responsible for various types of mitochondrial diseases have been identified in mtDNA; however, it remains uncertain why mitochondrial diseases present a wide variety of clinical spectrum even among patients carrying the same mtDNA mutations (e.g., variations in age of onset, in affected tissues and organs, or in disease progression and phenotypic severity). Disease-relevant induced pluripotent stem cells (iPSCs) derived from mitochondrial disease patients have therefore opened new avenues for understanding the definitive genotype-phenotype relationship of affected tissues and organs in various types of mitochondrial diseases triggered by mtDNA mutations. In this concise review, we briefly summarize several recent approaches using patient-derived iPSCs and their derivatives carrying various mtDNA mutations for applications in human mitochondrial disease modeling, drug discovery, and future regenerative therapeutics. © 2016 AlphaMed Press.

  2. A longitudinal investigation of the Concise Health Risk Tracking Self-Report (CHRT-SR) in suicidal patients during and after hospitalization.

    Science.gov (United States)

    Villegas, Ana C; DuBois, Christina M; Celano, Christopher M; Beale, Eleanor E; Mastromauro, Carol A; Stewart, Jeremy G; Auerbach, Randy P; Huffman, Jeff C; Hoeppner, Bettina B

    2017-09-20

    The Concise Health Risk Tracking Self-Report (CHRT-SR) scale is a brief self-report instrument to assess suicide risk. Initial investigations have indicated good psychometric properties in psychiatric outpatients. The aims of this paper were to examine the construct validity and factor structure of the twelve- (CHRT-SR12) and seven-item (CHRT-SR7) versions and to test if clinically expected within-person changes in suicide risk over time were measurable using the CHRT-SR in two study cohorts hospitalized for suicidal ideation or behavior: (1) patients with major depressive disorder (MDD) who participated in a psychological intervention trial, n = 65, and (2) participants with bipolar disorder or MDD in an observational study, n = 44. The CHRT-SR12 and self-report measures of hopelessness, depression, and positive psychological states were administered during admission and several times post-discharge. Both versions showed good internal consistency in inpatients and confirmed the three-factor structure (i.e., hopelessness, perceived lack of social support and active suicidal ideation and plans) found in outpatients. CHRT-SR scores had strong correlations with negative and positive affective constructs in the expected directions, and indicated decreases in suicide risk following discharge, in line with clinical expectations. The CHRT-SR12 and CHRT-SR7 are promising self-report measures for assessing suicide risk in very high-risk patient populations. Copyright © 2017. Published by Elsevier B.V.

  3. Structural defects in cubic semiconductors characterized by aberration-corrected scanning transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Arroyo Rojas Dasilva, Yadira; Kozak, Roksolana; Erni, Rolf; Rossell, Marta D., E-mail: marta.rossell@empa.ch

    2017-05-15

    The development of new electro-optical devices and the realization of novel types of transistors require a profound understanding of the structural characteristics of new semiconductor heterostructures. This article provides a concise review about structural defects which occur in semiconductor heterostructures on the basis of micro-patterned Si substrates. In particular, one- and two-dimensional crystal defects are being discussed which are due to the plastic relaxation of epitaxial strain caused by the misfit of crystal lattices. Besides a few selected examples from literature, we treat in particular crystal defects occurring in GaAs/Si, Ge/Si and β-SiC/Si structures which are studied by high-resolution annular dark-field scanning transmission electron microscopy. The relevance of this article is twofold; firstly, it should provide a collection of data which are of help for the identification and characterization of defects in cubic semiconductors by means of atomic-resolution imaging, and secondly, the experimental data shall provide a basis for advancing the understanding of device characteristics with the aid of theoretical modelling by considering the defective nature of strained semiconductor heterostructures. - Highlights: • The heterogeneous integration of high-quality compound semiconductors remains a challenge. • Lattice defects cause severe degradation of the semiconductor device performances. • Aberration-corrected HAADF-STEM allows atomic-scale characterization of defects. • An overview of lattice defects found in cubic semiconductors is presented. • Theoretical modelling and calculations are needed to determine the defect properties.

  4. Laser line scan performance prediction

    Science.gov (United States)

    Mahoney, Kevin L.; Schofield, Oscar; Kerfoot, John; Giddings, Tom; Shirron, Joe; Twardowski, Mike

    2007-09-01

    The effectiveness of sensors that use optical measurements for the laser detection and identification of subsurface mines is directly related to water clarity. The primary objective of the work presented here was to use the optical data collected by UUV (Slocum Glider) surveys of an operational areas to estimate the performance of an electro-optical identification (EOID) Laser Line Scan (LLS) system during RIMPAC 06, an international naval exercise off the coast of Hawaii. Measurements of optical backscattering and beam attenuation were made with a Wet Labs, Inc. Scattering Absorption Meter (SAM), mounted on a Rutgers University/Webb Research Slocum glider. The optical data universally indicated extremely clear water in the operational area, except very close to shore. The beam-c values from the SAM sensor were integrated to three attenuation lengths to provide an estimate of how well the LLS would perform in detecting and identifying mines in the operational areas. Additionally, the processed in situ optical data served as near-real-time input to the Electro-Optic Detection Simulator, ver. 3 (EODES-3; Metron, Inc.) model for EOID performance prediction. Both methods of predicting LLS performance suggested a high probability of detection and probability of identification. These predictions were validated by the actual performance of the LLS as the EOID system yielded imagery from which reliable mine identification could be made. Future plans include repeating this work in more optically challenging water types to demonstrate the utility of pre-mission UUV surveys of operational areas as a tactical decision aid for planning EOID missions.

  5. Human Digital Modeling & Hand Scanning Lab

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory incorporates specialized scanning equipment, computer workstations and software applications for the acquisition and analysis of digitized models of...

  6. Influence of scanning strategies on the accuracy of digital intraoral scanning systems.

    Science.gov (United States)

    Ender, A; Mehl, A

    2013-01-01

    The digital intraoral impression is a central part in today's CAD/CAM dentistry. With its possibilities, new treatment options for the patient is provided and the prosthetic workflow is accelerated. Nowadays, the major issue with intraoral scanning systems is to gain more accuracy especially for larger scan areas and to simplify clinical handling for the dentist. The aim of this study was to investigate different scanning strategies regardingtheir accuracy with full arch scans in an in-vitro study design. A reference master model was used for the digital impressions with the Lava COS, the Cerec Bluecam and a powderfree intraoral scanning system, Cadent iTero. The trueness and precision of each scanning protocol was measured. Lava COS provides the a trueness of 45.8 microm with the scanning protocol recommended from the manufacturer. A different scanning protocol shows significantly lower accuracy (trueness +/- 90.2 microm). Cerec Bluecam also benefits from an optimal scanning protocol with a trueness of +/- 23.3 microm compared to +/- 52.5 microm with a standard protocol. The powderfree impression system Cadent iTero shows also a high accurate full-arch scan with a trueness of +/- 35.0 microm and a precision of +/- 30.9 microm. With the current intraoral scanning systems, full arch dental impressions are possible with a high accuracy, if adequate scan strategies are used. The powderfree scanning system provides the same level of accuracy compared to scanning systems with surface pretreatment.

  7. Low Temperature Scanning Tunneling Spectroscopy

    Science.gov (United States)

    Kirk, Michael Dominic

    A scanning tunneling microscope (STM) was designed and built to operate at liquid helium temperature and was used to measure highly localized electron tunneling spectroscopy. Several instruments were built, all capable of operating in many different environments: air, vacuum, liquid helium and in a transfer gas. An adaptation of one particular design was made into an atomic force microscope capable of operating at low temperatures. Using a low temperature STM, three adsorbed molecular species (liquid crystals, sorbic acid, and carbon monoxide), deposited on a graphite substrate, have been imaged at 4.2K. The inelastic tunneling spectra of these adsorbates show strong peaks in dI/dV vs V curves at energies that correspond to known vibrational modes. The increase in conductance at the onset of inelastic tunneling was measured to be as high as 100 times. The spatial variation of the spectra was measured and was seen to change dramatically on the scale of angstroms, suggesting that individual molecular bonds could be measured. A theoretical model is presented to explain the contrast seen in the STM images of adsorbed molecules, thereby explaining why adsorbed molecules appear to be more conductive than the background. The microscope proved very useful for measuring the energy gap of high temperature superconductors. These materials often have submicron grain sizes. For LaSrCuO, YBaCuO, and BiCaSrCuO, the conductance curves showed a large energy gap suggesting a strongly coupled superconductor. The conductance curves also indicated that intergrain tunneling may occur and that the background conductance varied linearly with the applied voltage. The crystalline structure of rm Bi_2 Sr_2 CaCu_2 O_ {8 + delta} was imaged by an STM operating in air and in ultra-high vacuum. From the STM images the bulk crystal structure model for this material was refined. Finally, the STM was used to make holes reproducibly on a graphite surface with diameters less than 40A. Because the

  8. A concise and unified strategy for synthesis of the C1-C18 macrolactone fragments of FD-891, FD-892 and their analogues: formal total synthesis of FD-891.

    Science.gov (United States)

    Kanoh, Naoki; Kawamata, Ayano; Itagaki, Tomohiro; Miyazaki, Yuta; Yahata, Kenzo; Kwon, Eunsang; Iwabuchi, Yoshiharu

    2014-10-03

    A concise and unified strategy for the synthesis of C1-C18 macrolactone fragments of FD-891 and FD-892 as well as their analogues is reported. The strategy includes a stereoselective vinylogous Mukaiyama aldol reaction (VMAR) using chiral silyl ketene N,O-acetal to construct C6-C7 stereocenters, an E-selective ring closing metathesis to construct a C12-C13 olefin, and stereodivergent construction of a C8-C9 epoxide.

  9. Scan image compression-encryption hardware system

    Science.gov (United States)

    Bourbakis, Nikolaos G.; Brause, R.; Alexopoulos, C.

    1995-04-01

    This paper deals with the hardware design of an image compression/encryption scheme called SCAN. The scheme is based on the principles and ideas reflected by the specification of the SCAN language. SCAN is a fractal based context-free language which accesses sequentially the data of a 2D array, by describing and generating a wide range (near (nxn)) of space filling curves (or SCAN patterns) from a short set of simple ones. The SCAN method uses the algorithmic description of each 2D image as SCAN patterns combinations for the compression and encryption of the image data. Note that each SCAN letter or word accesses the image data with a different order (or sequence), thus the application of a variety of SCAN words associated with the compression scheme will produce various compressed versions of the same image. The compressed versions are compared in memory size and the best of them with the smallest size in bits could be used for the image compression/encryption. Note that the encryption of the image data is a result of the great number of possible space filling curves which could be generated by SCAN. Since the software implementation of the SCAN compression/encryption scheme requires some time, the hardware design and implementation of the SCAN scheme is necessary in order to reduce the image compression/encryption time to the real-time one. The development of such an image compression encryption system will have a significant impact on the transmission and storage of images. It will be applicable in multimedia and transmission of images through communication lines.

  10. Security scanning of Web sites at CERN

    CERN Multimedia

    IT Department

    2010-01-01

    As of early 2010, the CERN Computer Security Team will start regular scanning of all Web sites and Web applications at CERN, visible on the Internet, or on the General Purpose Network (office network). The goal of this scanning is to improve the quality of CERN Web sites. All deficits found will be reported by e-mail to the relevant Web site owners, and must be fixed in a timely manner. Web site owners may also request one-off scans of their Web site or Web application, by sending an e-mail to Computer.Security@cern.ch. These Web scans are designed to limit the impact on the scanned Web sites. Nevertheless, in very rare cases scans may cause undesired side-effects, e.g. generate a large number of log entries, or cause particularly badly designed or less robust Web applications to crash. If a Web site is affected by these security scans, it will also be susceptible to any more aggressive scan that can be performed any time by a malicious attacker. Such Web applications should be fixed, and also additionally...

  11. Multibeam scanning electron microscope : Experimental results

    NARCIS (Netherlands)

    Mohammadi-Gheidari, A.; Hagen, C.W.; Kruit, P.

    2010-01-01

    The authors present the first results obtained with their multibeam scanning electron microscope. For the first time, they were able to image 196 (array of 14×14) focused beams of a multielectron beam source on a specimen using single beam scanning electron microscope (SEM) optics. The system

  12. A Student-Built Scanning Tunneling Microscope

    Science.gov (United States)

    Ekkens, Tom

    2015-01-01

    Many introductory and nanotechnology textbooks discuss the operation of various microscopes including atomic force (AFM), scanning tunneling (STM), and scanning electron microscopes (SEM). In a nanotechnology laboratory class, students frequently utilize microscopes to obtain data without a thought about the detailed operation of the tool itself.…

  13. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Feeling Too Tall or Too Short Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that means ...

  14. Live ultrasound volume reconstruction using scout scanning.

    Science.gov (United States)

    Meyer, Amelie; Lasso, Andras; Ungi, Tamas; Fichtinger, Gabor

    2015-02-21

    Ultrasound-guided interventions often necessitate scanning of deep-seated anatomical structures that may be hard to visualize. Visualization can be improved using reconstructed 3D ultrasound volumes. High-resolution 3D reconstruction of a large area during clinical interventions is challenging if the region of interest is unknown. We propose a two-stage scanning method allowing the user to perform quick low-resolution scouting followed by high-resolution live volume reconstruction. Scout scanning is accomplished by stacking 2D tracked ultrasound images into a low-resolution volume. Then, within a region of interest defined in the scout scan, live volume reconstruction can be performed by continuous scanning until sufficient image density is achieved. We implemented the workflow as a module of the open-source 3D Slicer application, within the SlicerIGT extension and building on the PLUS toolkit. Scout scanning is performed in a few seconds using 3 mm spacing to allow region of interest definition. Live reconstruction parameters are set to provide good image quality (0.5 mm spacing, hole filling enabled) and feedback is given during live scanning by regularly updated display of the reconstructed volume. Use of scout scanning may allow the physician to identify anatomical structures. Subsequent live volume reconstruction in a region of interest may assist in procedures such as targeting needle interventions or estimating brain shift during surgery.

  15. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... I Help a Kid Who's Bullied? Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that means ...

  16. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... A Real Lifesaver Kids Talk About: Coaches Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía ...

  17. Optimal stimulation settings for CMAP scan registrations

    NARCIS (Netherlands)

    E.M. Maathuis (Ellen); R.D. Henderson (Robert); J. Drenthen (Judith); N.M. Hutchinson (Nicole); J.R. Daube (Jasper); J.H. Blok (Joleen); G.H. Visser (Gerhard Henk)

    2012-01-01

    textabstractBackground: The CMAP (Compound Muscle Action Potential) scan is a non-invasive electrodiagnostic tool, which provides a quick and visual assessment of motor unit potentials as electrophysiological components that together constitute the CMAP. The CMAP scan records the electrical activity

  18. Towards high-speed scanning tunneling microscopy

    NARCIS (Netherlands)

    Tabak, Femke Chantal

    2013-01-01

    In this thesis, two routes towards high-speed scanning tunneling microscopy (STM) are described. The first possibility for high-speed scanning that is discussed is the use of MEMS (Micro-Electro Mechanical Systems) devices as high-speed add-ons in STM microscopes. The functionality of these devices

  19. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... You Go to School? Breast Cancer Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that means ...

  20. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    The spatial scan statistic is widely used to search for clusters in epidemiologic data. This paper shows that the usually applied elimination of secondary clusters as implemented in SatScan is sensitive to smooth changes in the shape of the clusters. We present an algorithm for generation of set...

  1. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    2006-01-01

    The spatial scan statistic is widely used to search for clusters. This article shows that the usually applied elimination of secondary clusters as implemented in SatScan is sensitive to smooth changes in the shape of the clusters. We present an algorithm for generation of a set of confocal elliptic...

  2. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... With Stepparents Be a Green Kid Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that means ...

  3. Ultrasonic scanning for pallet part grading

    Science.gov (United States)

    Mohammed F. Kabir; Daniel L. Schmoldt; Mark E. Schafer; Philip A. Araman

    2000-01-01

    Sorting and grading of wooden pallet parts are key factors for pallet manufacturing quality and pallet durability. The feasibility of ultrasonic scanning for defect detection in pallet manufacturing is examined in this report. Scanning was conducted by two pressure-contact rolling transducers in a pitch-catch arrangement. Pallet part deckboards were fed through the...

  4. Gender, environmental scanning and performance of micro ...

    African Journals Online (AJOL)

    The current business environment for micro enterprises in South Africa is very competitive, turbulent and constantly changing. Micro entrepreneurs need to gain knowledge of the business environment through environmental scanning. The study examined the frequency of environmental scanning practices by micro ...

  5. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... to School? Breast Cancer Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that ...

  6. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Is an Intellectual Disability? Movie: Endocrine System Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía ...

  7. Full cycle rapid scan EPR deconvolution algorithm

    Science.gov (United States)

    Tseytlin, Mark

    2017-08-01

    Rapid scan electron paramagnetic resonance (RS EPR) is a continuous-wave (CW) method that combines narrowband excitation and broadband detection. Sinusoidal magnetic field scans that span the entire EPR spectrum cause electron spin excitations twice during the scan period. Periodic transient RS signals are digitized and time-averaged. Deconvolution of absorption spectrum from the measured full-cycle signal is an ill-posed problem that does not have a stable solution because the magnetic field passes the same EPR line twice per sinusoidal scan during up- and down-field passages. As a result, RS signals consist of two contributions that need to be separated and postprocessed individually. Deconvolution of either of the contributions is a well-posed problem that has a stable solution. The current version of the RS EPR algorithm solves the separation problem by cutting the full-scan signal into two half-period pieces. This imposes a constraint on the experiment; the EPR signal must completely decay by the end of each half-scan in order to not be truncated. The constraint limits the maximum scan frequency and, therefore, the RS signal-to-noise gain. Faster scans permit the use of higher excitation powers without saturating the spin system, translating into a higher EPR sensitivity. A stable, full-scan algorithm is described in this paper that does not require truncation of the periodic response. This algorithm utilizes the additive property of linear systems: the response to a sum of two inputs is equal the sum of responses to each of the inputs separately. Based on this property, the mathematical model for CW RS EPR can be replaced by that of a sum of two independent full-cycle pulsed field-modulated experiments. In each of these experiments, the excitation power equals to zero during either up- or down-field scan. The full-cycle algorithm permits approaching the upper theoretical scan frequency limit; the transient spin system response must decay within the scan

  8. Scanning tunneling microscope assembly, reactor, and system

    Science.gov (United States)

    Tao, Feng; Salmeron, Miquel; Somorjai, Gabor A

    2014-11-18

    An embodiment of a scanning tunneling microscope (STM) reactor includes a pressure vessel, an STM assembly, and three spring coupling objects. The pressure vessel includes a sealable port, an interior, and an exterior. An embodiment of an STM system includes a vacuum chamber, an STM reactor, and three springs. The three springs couple the STM reactor to the vacuum chamber and are operable to suspend the scanning tunneling microscope reactor within the interior of the vacuum chamber during operation of the STM reactor. An embodiment of an STM assembly includes a coarse displacement arrangement, a piezoelectric fine displacement scanning tube coupled to the coarse displacement arrangement, and a receiver. The piezoelectric fine displacement scanning tube is coupled to the coarse displacement arrangement. The receiver is coupled to the piezoelectric scanning tube and is operable to receive a tip holder, and the tip holder is operable to receive a tip.

  9. Significance of leukocyte scanning in infected endoprostheses

    Energy Technology Data Exchange (ETDEWEB)

    Becker, W.; Pasurka, B.; Boerner, W.

    1989-03-01

    31 patients with suspected septic loosening of an endoprosthesis (hip endoprosthesis n=30; knee endoprosthesis n=1) were examined with leukocyte scans (10 MBq /sup 111/In-oxine: n=22; 300 MBq /sup 99m/Tc-HMPAO: n=9). The results were compared with results of the bacterial growth (n=22), the histology (n=12) and of the bone scans (/sup 99m/Tc-MDP: n=20) which were performed within 4 days. The sensitivity of the bone scan was 100%, the specificity 30% and the diagnostic accuracy regarding a septic loosening of the arthroplasty was 55%. For the leukocyte scans a comparable sensitivity of 100%, but a higher specificity (86%) and accuracy (91%) could be calculated. A false positive leukocyte scan could be observed in a periprosthetic granuloma, an ossifying periarthritis and in a patient with negative bacterial growth with the histological proof of an inflammation.

  10. Speckle suppression in scanning laser display.

    Science.gov (United States)

    Yurlov, Victor; Lapchuk, Anatoly; Yun, Sangkyeong; Song, Jonghyeong; Yang, Haengseok

    2008-01-10

    The theory of speckle noise in a scanning beam is presented. The general formulas for the calculation of speckle contrast, which apply to any scanning display, are obtained. It is shown that the main requirement for successful speckle suppression in a scanning display is a narrow autocorrelation peak and low sidelobe level in the autocorrelation function of the complex amplitude distribution across a scanning light beam. The simple formulas for speckle contrast for a beam with a narrow autocorrelation function peak were obtained. It was shown that application of a diffractive optical element (DOE) with a Barker code phase shape could use only natural display scanning motion for speckle suppression. DOE with a Barker code phase shape has a small size and may be deposited on the light modulator inside the depth of the focus of the reflected beam area, and therefore, it does not need an additional image plane and complicated relay optics.

  11. A Novel Scan Architecture for Low Power Scan-Based Testing

    Directory of Open Access Journals (Sweden)

    Mahshid Mojtabavi Naeini

    2015-01-01

    Full Text Available Test power has been turned to a bottleneck for test considerations as the excessive power dissipation has serious negative effects on chip reliability. In scan-based designs, rippling transitions caused by test patterns shifting along the scan chain not only elevate power consumption but also introduce spurious switching activities in the combinational logic. In this paper, we propose a novel area-efficient gating scan architecture that offers an integrated solution for reducing total average power in both scan cells and combinational part during shift mode. In the proposed gating scan structure, conventional master/slave scan flip-flop has been modified into a new gating scan cell augmented with state preserving and gating logic that enables average power reduction in combinational logic during shift mode. The new gating scan cells also mitigate the number of transitions during shift and capture cycles. Thus, it contributes to average power reduction inside the scan cell during scan shifting with low impact on peak power during capture cycle. Simulation results have shown that the proposed gating scan cell saves 28.17% total average power compared to conventional scan cell that has no gating logic and up to 44.79% compared to one of the most common existing gating architectures.

  12. Astronomical measurement a concise guide

    CERN Document Server

    Lawrence, Andy

    2014-01-01

    This book on astronomical measurement takes a fresh approach to teaching the subject. After discussing some general principles, it follows the chain of measurement through atmosphere, imaging, detection, spectroscopy, timing, and hypothesis testing. The various wavelength regimes are covered in each section, emphasising what is the same, and what is different. The author concentrates on the physics of detection and the principles of measurement, aiming to make this logically coherent. The book is based on a short self contained lecture course for advanced undergraduate students developed and taught by the author over several years.

  13. Concise guide to information literacy

    CERN Document Server

    Lanning, Scott

    2012-01-01

    At a time when students are bombarded with a seemingly infinite variety of information sources, this invaluable guide helps them build the skills they need to distinguish good sources from those that are less reliable.

  14. A concise history of mathematics

    CERN Document Server

    Struik, Dirk J

    1987-01-01

    This compact, well-written history - first published in 1948, and now in its fourth revised edition - describes the main trends in the development of all fields of mathematics from the first available records to the middle of the 20th century. Students, researchers, historians, specialists - in short, everyone with an interest in mathematics - will find it engrossing and stimulating.Beginning with the ancient Near East, the author traces the ideas and techniques developed in Egypt, Babylonia, China, and Arabia, looking into such manuscripts as the Egyptian Papyrus Rhind, the Ten Classics of C

  15. Pancreatic trauma: A concise review

    Science.gov (United States)

    Debi, Uma; Kaur, Ravinder; Prasad, Kaushal Kishor; Sinha, Saroj Kant; Sinha, Anindita; Singh, Kartar

    2013-01-01

    Traumatic injury to the pancreas is rare and difficult to diagnose. In contrast, traumatic injuries to the liver, spleen and kidney are common and are usually identified with ease by imaging modalities. Pancreatic injuries are usually subtle to identify by different diagnostic imaging modalities, and these injuries are often overlooked in cases with extensive multiorgan trauma. The most evident findings of pancreatic injury are post-traumatic pancreatitis with blood, edema, and soft tissue infiltration of the anterior pararenal space. The alterations of post-traumatic pancreatitis may not be visualized within several hours following trauma as they are time dependent. Delayed diagnoses of traumatic pancreatic injuries are associated with high morbidity and mortality. Imaging plays an important role in diagnosis of pancreatic injuries because early recognition of the disruption of the main pancreatic duct is important. We reviewed our experience with the use of various imaging modalities for diagnosis of blunt pancreatic trauma. PMID:24379625

  16. Concise Lexicon for Sign Linguistics

    NARCIS (Netherlands)

    dr. Jan Nijen Twilhaar; Dr. Beppie van den Bogaerde

    2016-01-01

    This extensive, well-researched and clearly formatted lexicon of a wide variety of linguistic terms is a long overdue. It is an extremely welcome addition to the bookshelves of sign language teachers, interpreters, linguists, learners and other sign language users, and of course of the Deaf

  17. Statistical theory a concise introduction

    CERN Document Server

    Abramovich, Felix

    2013-01-01

    Introduction Preamble Likelihood Sufficiency Minimal sufficiency Completeness Exponential family of distributionsPoint Estimation Introduction Maximum likelihood estimation Method of moments Method of least squares Goodness-of-estimation. Mean squared error. Unbiased estimationConfidence Intervals, Bounds, and Regions Introduction Quoting the estimation error Confidence intervalsConfidence bounds Confidence regionsHypothesis Testing Introduction Simple hypothesesComposite hypothesesHypothesis testing and confidence intervals Sequential testingAsymptotic Analysis Introduction Convergence and consistency in MSE Convergence and consistency in probability Convergence in distribution The central limit theorem Asymptotically normal consistency Asymptotic confidence intervals Asymptotic normality of the MLE Multiparameter case Asymptotic distribution of the GLRT. Wilks' theorem.Bayesian Inference Introduction Choice of priors Point estimation Interval estimation. Credible sets. Hypothesis testingElements of Statisti...

  18. Nursing leadership: a concise encyclopedia

    National Research Council Canada - National Science Library

    Feldman, Harriet R

    2008-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 569This page intentionally left blank List of EntriesList of Entries A Academic...

  19. Plantar fasciitis: a concise review.

    Science.gov (United States)

    Schwartz, Emily N; Su, John

    2014-01-01

    One challenge in the treatment of plantar fasciitis is that very few high-quality studies exist comparing different treatment modalities to guide evidence-based management. Current literature suggests a change to the way that plantar fasciitis is managed. This article reviews the most current literature on plantar fasciitis and showcases recommended treatment guidelines. This serves to assist physicians in diagnosing and treating heel pain with plantar fasciitis.

  20. Plantar Fasciitis: A Concise Review

    OpenAIRE

    Schwartz, Emily N; Su, John

    2014-01-01

    One of the challenges in the treatment of plantar fasciitis is that there are very few high-quality studies comparing different treatment modalities to guide evidence-based management. Current literature suggests a change to the way that plantar fasciitis is managed. This article reviews the most current literature on plantar fasciitis and showcases recommended treatment guidelines.

  1. Microscopic colitis: a concise review.

    Science.gov (United States)

    Zippi, M; Marcheggiano, A; Crispino, P; Occhigrossi, G; Severi, C

    2010-01-01

    Microscopic colitis is an increasingly common cause of chronic watery diarrhoea, and often a causes of abdominal pain of unknown origins. The increase of interest for this clinical entity is due to a misdiagnosis of any symptoms that have been frequently attributed to diarrhea-predominant irritable bowel syndrome, often for many years before diagnosis. Presumably, most estimates of incidence and prevalence understate the true frequency of microscopic colitis for this reason. The aim of this paper is to evaluate the importance of microscopic colitis as cause of chronic non bloody diarrhoea, on the basis of literature review. These kind of colitis are characterized by normal colonic mucosa at endoscopy or barium enema but with increased inflammation in colonic biopsies. Microscopic colitis consists of two main subtypes, collagenous colitis and lymphocytic colitis, distinguished by the presence of absence of a thickened subepithelial collagen band. Several models of pathogenesis has been proposed but no convincing mechanism has been identified, although is difficult to characterize this clinical entity as an independent phenomenon or a simple manifestation or related factors active to induce microscopic changing in the colonic mucosa. A rational approach to therapy does not exist and was conduct with several types of drugs after the exclusion of other causes, commonly characterized by this symptoms and the definitive histological assessment in the biopsies specimens. In the majority of cases this condition tends to follow a self-limited course but potentially can assume the characteristics of relapsing course with the necessity to a chronic therapy. Several long-term follow-up studies excluded a possible progression to neoplastic malignancies of microscopic colitis.

  2. Concise revision of the Sarcospermataceae

    NARCIS (Netherlands)

    Lam, H.J.; Royen, van P.

    1952-01-01

    After the senior writer, together with W. W. Varossieau, had published a revision of this monogeneric family (Blumea III, 1938—’39 and IV, 1941), some more material has been examined by us and, moreover, some new species have been described. Thanks to the courtesy of Prof. F. Gagnepain of Paris, and

  3. Probability theory a concise course

    CERN Document Server

    Rozanov, Y A

    1977-01-01

    This clear exposition begins with basic concepts and moves on to combination of events, dependent events and random variables, Bernoulli trials and the De Moivre-Laplace theorem, a detailed treatment of Markov chains, continuous Markov processes, and more. Includes 150 problems, many with answers. Indispensable to mathematicians and natural scientists alike.

  4. Optimal stimulation settings for CMAP scan registrations

    Directory of Open Access Journals (Sweden)

    Maathuis Ellen M

    2012-06-01

    Full Text Available Abstract Background The CMAP (Compound Muscle Action Potential scan is a non-invasive electrodiagnostic tool, which provides a quick and visual assessment of motor unit potentials as electrophysiological components that together constitute the CMAP. The CMAP scan records the electrical activity of the muscle (CMAP in response to transcutaneous stimulation of the motor nerve with gradual changes in stimulus intensity. Large MUs, including those that result from collateral reinnervation, appear in the CMAP scan as so-called steps, i.e., clearly visible jumps in CMAP amplitude. The CMAP scan also provides information on nerve excitability. This study aims to evaluate the influence of the stimulation protocol used on the CMAP scan and its quantification. Methods The stimulus frequency (1, 2 and 3 Hz, duration (0.05, 0.1 and 0.3 ms, or number (300, 500 and 1000 stimuli in CMAP scans of 23 subjects was systematically varied while the other two parameters were kept constant. Pain was measured by means of a visual analogue scale (VAS. Non-parametric paired tests were used to assess significant differences in excitability and step variables and VAS scores between the different stimulus parameter settings. Results We found no effect of stimulus frequency on CMAP scan variables or VAS scores. Stimulus duration affected excitability variables significantly, with higher stimulus intensity values for shorter stimulus durations. Step variables showed a clear trend towards increasing values with decreasing stimulus number. Conclusions A protocol delivering 500 stimuli at a frequency of 2 Hz with a 0.1 ms pulse duration optimized CMAP scan quantification with a minimum of subject discomfort, artefact and duration of the recording. CMAP scan variables were influenced by stimulus duration and number; hence, these need to be standardized in future studies.

  5. Clinical applications of Genome Polymorphism Scans

    Directory of Open Access Journals (Sweden)

    Weber James L

    2006-06-01

    Full Text Available Abstract Applications of Genome Polymorphism Scans range from the relatively simple such as gender determination and confirmation of biological relationships, to the relatively complex such as determination of autozygosity and propagation of genetic information throughout pedigrees. Unlike nearly all other clinical DNA tests, the Scan is a universal test – it covers all people and all genes. In balance, I argue that the Genome Polymorphism Scan is the most powerful, affordable clinical DNA test available today. Reviewers: This article was reviewed by Scott Weiss (nominated by Neil Smalheiser, Roberta Pagon (nominated by Jerzy Jurka and Val Sheffield (nominated by Neil Smalheiser.

  6. A High Rigidity and Precision Scanning Tunneling Microscope with Decoupled XY and Z Scans

    Directory of Open Access Journals (Sweden)

    Xu Chen

    2017-01-01

    Full Text Available A new scan-head structure for the scanning tunneling microscope (STM is proposed, featuring high scan precision and rigidity. The core structure consists of a piezoelectric tube scanner of quadrant type (for XY scans coaxially housed in a piezoelectric tube with single inner and outer electrodes (for Z scan. They are fixed at one end (called common end. A hollow tantalum shaft is coaxially housed in the XY-scan tube and they are mutually fixed at both ends. When the XY scanner scans, its free end will bring the shaft to scan and the tip which is coaxially inserted in the shaft at the common end will scan a smaller area if the tip protrudes short enough from the common end. The decoupled XY and Z scans are desired for less image distortion and the mechanically reduced scan range has the superiority of reducing the impact of the background electronic noise on the scanner and enhancing the tip positioning precision. High quality atomic resolution images are also shown.

  7. A High Rigidity and Precision Scanning Tunneling Microscope with Decoupled XY and Z Scans.

    Science.gov (United States)

    Chen, Xu; Guo, Tengfei; Hou, Yubin; Zhang, Jing; Meng, Wenjie; Lu, Qingyou

    2017-01-01

    A new scan-head structure for the scanning tunneling microscope (STM) is proposed, featuring high scan precision and rigidity. The core structure consists of a piezoelectric tube scanner of quadrant type (for XY scans) coaxially housed in a piezoelectric tube with single inner and outer electrodes (for Z scan). They are fixed at one end (called common end). A hollow tantalum shaft is coaxially housed in the XY-scan tube and they are mutually fixed at both ends. When the XY scanner scans, its free end will bring the shaft to scan and the tip which is coaxially inserted in the shaft at the common end will scan a smaller area if the tip protrudes short enough from the common end. The decoupled XY and Z scans are desired for less image distortion and the mechanically reduced scan range has the superiority of reducing the impact of the background electronic noise on the scanner and enhancing the tip positioning precision. High quality atomic resolution images are also shown.

  8. SCAN secure processor and its biometric capabilities

    Science.gov (United States)

    Kannavara, Raghudeep; Mertoguno, Sukarno; Bourbakis, Nikolaos

    2011-04-01

    This paper presents the design of the SCAN secure processor and its extended instruction set to enable secure biometric authentication. The SCAN secure processor is a modified SparcV8 processor architecture with a new instruction set to handle voice, iris, and fingerprint-based biometric authentication. The algorithms for processing biometric data are based on the local global graph methodology. The biometric modules are synthesized in reconfigurable logic and the results of the field-programmable gate array (FPGA) synthesis are presented. We propose to implement the above-mentioned modules in an off-chip FPGA co-processor. Further, the SCAN-secure processor will offer a SCAN-based encryption and decryption of 32 bit instructions and data.

  9. Can Scans Predict Some Autism Cases?

    Science.gov (United States)

    ... news/fullstory_167668.html Can Scans Predict Some Autism Cases? When the disorder is caused by a ... News) -- People with a particular genetic cause of autism show structural abnormalities in the brain that are ...

  10. Intelligent Classification and Visualization of Network Scans

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L; Muelder, C; Ma, K; Bartoletti, A

    2007-03-01

    Network scans are a common first step in a network intrusion attempt. In order to gain information about a potential network intrusion, it is beneficial to analyze these network scans. Statistical methods such as wavelet scalogram analysis have been used along with visualization techniques in previous methods. However, applying these statistical methods to reduce the data causes a substantial amount of data loss. This paper presents a study of using associative memory learning techniques to directly compare network scans in order to create a classification which can be used by itself or in conjunction with existing visualization techniques to better characterize the sources of these scans. This produces an integrated system of visual and intelligent analysis which is applicable to real world data.

  11. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Kids for Teens Search Kids Home How the Body Works Puberty & Growing Up Staying Healthy Recipes & Cooking ... computer pictures of what's going on inside your body. The scan itself is painless. All you'll ...

  12. Performance of the SRRC scanning photoelectron microscope

    CERN Document Server

    Hong, I H; Yin, G C; Wei, D H; Juang, J M; Dann, T E; Klauser, R; Chuang, T J; Chen, C T; Tsang, K L

    2001-01-01

    A scanning photoelectron microscope has been constructed at SRRC. This SPEM system consists primarily of a Fresnel zone plate (ZP) with an order-selection aperture, a flexure scanning stage, a hemispherical electron analyzer, and sample/ZP insertion system. The flexure stage is used to scan the sample. A hemispherical analyzer with Omni V lens and a 16-channel multichannel detector (MCD) is used to collect photoelectrons. A set of 16 photoelectron images at different kinetic energies can be simultaneously acquired in one single scan. The data acquisition system is designed to collect up to 32 images concurrently, including 16 MCD signals, total electron yield and transmitted photon flux. The design and some initial test results of this SPEM station are presented and discussed.

  13. A Scanning Quantum Cryogenic Atom Microscope

    CERN Document Server

    Yang, Fan; Taylor, Stephen F; Turner, Richard W; Lev, Benjamin L

    2016-01-01

    Microscopic imaging of local magnetic fields provides a window into the organizing principles of complex and technologically relevant condensed matter materials. However, a wide variety of intriguing strongly correlated and topologically nontrivial materials exhibit poorly understood phenomena outside the detection capability of state-of-the-art high-sensitivity, high-resolution scanning probe magnetometers. We introduce a quantum-noise-limited scanning probe magnetometer that can operate from room-to-cryogenic temperatures with unprecedented DC-field sensitivity and micron-scale resolution. The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) employs a magnetically levitated atomic Bose-Einstein condensate (BEC), thereby providing immunity to conductive and blackbody radiative heating. The SQCRAMscope has a noise floor of 300 pT and provides a 100x improvement in magnetic flux sensitivity over previous atomic scanning probe magnetometers. These capabilities are carefully benchmarked by imaging magnet...

  14. EO Scanned Micro-LADAR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase II SBIR we will design, build, test, and deliver new scanning based micro-ladar sensors with unprecedented small size, weight, and power (SWaP),...

  15. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... computer pictures of what's going on inside your body. The scan itself is painless. All you'll need to do is hold ... All rights reserved. Images provided by The Nemours Foundation, iStock, Getty Images, ...

  16. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Weight for Me? What Is an Intellectual Disability? Movie: Endocrine System Getting a ... Translated, that means a scanner takes computer pictures of what's going on inside your body. The scan itself is painless. All you'll ...

  17. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Health Food & Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Getting a CAT Scan (Video) KidsHealth / For ...

  18. EO Scanned Micro-LADAR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR program we will develop, design and build new scanning based micro-ladar sensors with unprecedented small size, weight, and power (SWaP), thereby...

  19. Slow-Scan TV Bibliography, 1988.

    Science.gov (United States)

    Colorado Video, Inc., Boulder.

    This 175-item bibliography on slow-scan television lists journal articles, monographs, research reports, and conference proceedings under the following headings: (1) Instructional Applications; (2) Medical Applications; and (3) General Applications. (MES)

  20. Analysing magnetism using scanning SQUID microscopy.

    Science.gov (United States)

    Reith, P; Renshaw Wang, X; Hilgenkamp, H

    2017-12-01

    Scanning superconducting quantum interference device microscopy (SSM) is a scanning probe technique that images local magnetic flux, which allows for mapping of magnetic fields with high field and spatial accuracy. Many studies involving SSM have been published in the last few decades, using SSM to make qualitative statements about magnetism. However, quantitative analysis using SSM has received less attention. In this work, we discuss several aspects of interpreting SSM images and methods to improve quantitative analysis. First, we analyse the spatial resolution and how it depends on several factors. Second, we discuss the analysis of SSM scans and the information obtained from the SSM data. Using simulations, we show how signals evolve as a function of changing scan height, SQUID loop size, magnetization strength, and orientation. We also investigated 2-dimensional autocorrelation analysis to extract information about the size, shape, and symmetry of magnetic features. Finally, we provide an outlook on possible future applications and improvements.

  1. Multicolor Scanning Laser Imaging in Diabetic Retinopathy.

    Science.gov (United States)

    Ahmad, Mohammad S Z; Carrim, Zia Iqbal

    2017-11-01

    Diabetic retinopathy is a common cause of blindness in individuals younger than 60 years. Screening for retinopathy is undertaken using conventional color fundus photography and relies on the identification of hemorrhages, vascular abnormalities, exudates, and cotton-wool spots. These can sometimes be difficult to identify. Multicolor scanning laser imaging, a new imaging modality, may have a role in improving screening outcomes, as well as facilitating treatment decisions. Observational case series comprising two patients with known diabetes who were referred for further examination after color fundus photography revealed abnormal findings. Multicolor scanning laser imaging was undertaken. Features of retinal disease from each modality were compared. Multicolor scanning laser imaging provides superior visualization of retinal anatomy and pathology, thereby facilitating risk stratification and treatment decisions. Multicolor scanning laser imaging is a novel imaging technique offering the potential for improving the reliability of screening for diabetic retinopathy. Validation studies are warranted.

  2. Scanning Electron Microscopy in modern dentistry research

    OpenAIRE

    Paradella, Thaís Cachuté; Unesp-FOSJC; Bottino, Marco Antonio; Unesp-FOSJC

    2012-01-01

    The purpose of this article was to review the usage of Scanning Electron Microscopy (SEM) in dentistry research nowadays, through a careful and updated literature review. By using the key-words Scanning Electron Microscopy and one of the following areas of research in dentistry (Endodontics, Periodontics and Implant), in international database (PubMed), in the year of 2012 (from January to September), a total of 112 articles were found. This data was tabled and the articles were classified ac...

  3. [Preoperative CT Scan in middle ear cholesteatoma].

    Science.gov (United States)

    Sethom, Anissa; Akkari, Khemaies; Dridi, Inès; Tmimi, S; Mardassi, Ali; Benzarti, Sonia; Miled, Imed; Chebbi, Mohamed Kamel

    2011-03-01

    To compare preoperative CT scan finding and per-operative lesions in patients operated for middle ear cholesteatoma, A retrospective study including 60 patients with cholesteatoma otitis diagnosed and treated within a period of 5 years, from 2001 to 2005, at ENT department of Military Hospital of Tunis. All patients had computed tomography of the middle and inner ear. High resolution CT scan imaging was performed using millimetric incidences (3 to 5 millimetres). All patients had surgical removal of their cholesteatoma using down wall technic. We evaluated sensitivity, specificity and predictive value of CT-scan comparing otitic damages and CT finding, in order to examine the real contribution of computed tomography in cholesteatoma otitis. CT scan analysis of middle ear bone structures shows satisfaction (with 83% of sensibility). The rate of sensibility decrease (63%) for the tympanic raff. Predictive value of CT scan for the diagnosis of cholesteatoma was low. However, we have noticed an excellent sensibility in the analysis of ossicular damages (90%). Comparative frontal incidence seems to be less sensible for the detection of facial nerve lesions (42%). But when evident on CT scan findings, lesions of facial nerve were usually observed preoperatively (spécificity 78%). Predictive value of computed tomography for the diagnosis of perilymphatic fistulae (FL) was low. In fact, CT scan imaging have showed FL only for four patients among eight. Best results can be obtained if using inframillimetric incidences with performed high resolution computed tomography. Preoperative computed tomography is necessary for the diagnosis and the evaluation of chronic middle ear cholesteatoma in order to show extending lesion and to detect complications. This CT analysis and surgical correlation have showed that sensibility, specificity and predictive value of CT-scan depend on the anatomic structure implicated in cholesteatoma damages.

  4. Differential-concentration scanning ion conductance microscopy

    OpenAIRE

    Perry, David; Page, Ashley; Chen, Baoping; Frenguelli, Bruno G.; Unwin, Patrick R.

    2017-01-01

    Scanning ion conductance microscopy (SICM) is a nanopipette-based scanning probe microscopy technique that utilizes the ionic current flowing between an electrode inserted inside a nanopipette probe containing electrolyte solution and a second electrode placed in a bulk electrolyte bath, to provide information on a substrate of interest. For most applications to date, the composition and concentration of the electrolyte inside and outside the nanopipette is identical, but it is shown herein t...

  5. Galvanometer scanning technology for laser additive manufacturing

    Science.gov (United States)

    Luo, Xi; Li, Jin; Lucas, Mark

    2017-02-01

    A galvanometer laser beam scanning system is an essential element in many laser additive manufacturing (LAM) technologies including Stereolithography (SLA), Selective Laser Sintering (SLS) and Selective Laser Melting (SLM). Understanding the laser beam scanning techniques and recent innovations in this field will greatly benefit the 3D laser printing system integration and technology advance. One of the challenges to achieve high quality 3D printed parts is due to the non-uniform laser power density delivered on the materials caused by the acceleration and deceleration movements of the galvanometer at ends of the hatching and outlining patterns. One way to solve this problem is to modulate the laser power as the function of the scanning speed during the acceleration or deceleration periods. Another strategy is to maintain the constant scanning speed while accurately coordinating the laser on and off operation throughout the job. In this paper, we demonstrate the high speed, high accuracy and low drift digital scanning technology that incorporates both techniques to achieve uniform laser density with minimal additional process development. With the constant scanning speed method, the scanner not only delivers high quality and uniform results, but also a throughput increase of 23% on a typical LAM job, compared to that of the conventional control method that requires galvanometer acceleration and deceleration movements.

  6. Role of bone scan in rheumatic disease

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yun Young [Hanyang University College of Medicine, Seoul (Korea, Republic of)

    2003-06-01

    Rheumatic diseases can be categorized by pathology into several specific types of musculoskeletal problems, including synovitis (e.g. rheumatoid arthritis), enthesopathy (e.g. ankylosing spondylitis) and cartilage degeneration (e.g. osteoarthritis). Skeletal radiographs have contributed to the diagnosis of these articular diseases, and some disease entities need typical radiographic changes as a factor of the diagnostic criteria. However, they sometimes show normal radiographic findings in the early stage of disease, when there is demineralization of less than 30-50%. Bone scans have also been used in arthritis, but not widely because the findings are nonspecific and it is thought that bone scans do not add significant information to routine radiography. Bone scans do however play a different role than simple radiography, and it is a complementary imaging method in the course of management of arthritis. The image quality of bone scans can be improved by obtaining regional views and images under al pin-hole collimator, and through a variety of scintigraphic techniques including the three phase bone scan and bone SPECT. Therefore, bone scans could improve the diagnostic value, and answer multiple clinical questions, based on the pathophysiology of various forms of arthritis.

  7. On the instability and constraints of the interaction between number representation and spatial attention in healthy humans: A concise review of the literature and new experimental evidence.

    Science.gov (United States)

    Fattorini, E; Pinto, M; Merola, S; D'Onofrio, M; Doricchi, F

    2016-01-01

    The relationship between number and space representation is still one of the most debated topics in studies of mathematical cognition. Here we offer a concise review of two important behavioral effects that have pointed out the use of a spatially left-to-right oriented mental number line (MNL) in healthy participants: the SNARC effect and the attentional SNARC effect (Att-SNARC). Following a brief summary of seminal investigations on the introspective properties of the MNL, we review recent empirical evidence and theories on the functional origin of the SNARC effect, where upon left/right response choices faster reaction times are found for small numbers with left-side responses and for large numbers with right-side responses. Then we offer a summary of the studies that have investigated whether the mere perception of visual Arabic numbers presented at central fixation can engender spatially congruent lateral shifts of attention, ie, leftward for small numbers and rightward for large ones, ie, the Att-SNARC effect. Finally, we summarize four experiments that tested whether the Att-SNARC depends on an active rather than passive processing of centrally presented digit cues. In line with other recent studies, these experiment do not replicate the original Att-SNARC and show that the mere perception of Arabic numerals does not trigger automatic shifts of attention. These shifts are instead found when the task requires the explicit left/right spatial coding of digit cues, ie, Spatial Att-SNARC (Fattorini et al., 2015b). Nonetheless, the reliability of the Spatial Att-SNARC effect seems not as strong as that of conventional SNARC effects where left/right codes are mapped onto responses rather than directly mapped on digit cues. Comparing the magnitude of digits to a numerical reference, ie, "5," also produced a Magnitude Comparison Att-SNARC that was weaker than the spatial one. However, the reliability of this Magnitude Comparison Att-SNARC should be considered with

  8. Radiation exposure from musculoskeletal computerized tomographic scans.

    Science.gov (United States)

    Biswas, Debdut; Bible, Jesse E; Bohan, Michael; Simpson, Andrew K; Whang, Peter G; Grauer, Jonathan N

    2009-08-01

    Computerized tomographic scans are routinely obtained to evaluate a number of musculoskeletal conditions. However, since computerized tomographic scans expose patients to the greatest amounts of radiation of all imaging modalities, the physician must be cognizant of the effective doses of radiation that are administered. This investigation was performed to quantify the effective doses of computerized tomographic scans that are performed for various musculoskeletal applications. The digital imaging archive of a single institution was retrospectively reviewed to identify helical computerized tomographic scans that were completed to visualize the extremities or spine. Imaging parameters were recorded for each examination, and dosimetry calculator software was used to calculate the effective dose values according to a modified protocol derived from publication SR250 of the National Radiological Protection Board of the United Kingdom. Computerized tomographic scans of the chest, abdomen, and pelvis were also collected, and the effective doses were compared with those reported by prior groups in order to validate the results of the current study. The mean effective doses for computerized tomographic scans of the chest, abdomen, and pelvis (5.27, 4.95, and 4.85 mSv, respectively) were consistent with those of previous investigations. The highest mean effective doses were recorded for studies evaluating the spine (4.36, 17.99, and 19.15 mSv for the cervical, thoracic, and lumbar spines, respectively). In the upper extremity, the effective dose of a computerized tomographic scan of the shoulder (2.06 mSv) was higher than those of the elbow (0.14 mSv) and wrist (0.03 mSv). Similarly, the effective dose of a hip scan (3.09 mSv) was significantly higher than those observed with knee (0.16 mSv) and ankle (0.07 mSv) scans. Computerized tomographic scans of the axial and appendicular skeleton are associated with substantially elevated radiation exposures, but the effective dose

  9. Development of novel radiogallium-labeled bone imaging agents using oligo-aspartic acid peptides as carriers.

    Directory of Open Access Journals (Sweden)

    Kazuma Ogawa

    Full Text Available (68Ga (T 1/2 = 68 min, a generator-produced nuclide has great potential as a radionuclide for clinical positron emission tomography (PET. Because poly-glutamic and poly-aspartic acids have high affinity for hydroxyapatite, to develop new bone targeting (68Ga-labeled bone imaging agents for PET, we used 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA as a chelating site and conjugated aspartic acid peptides of varying lengths. Subsequently, we compared Ga complexes, Ga-DOTA-(Aspn (n = 2, 5, 8, 11, or 14 with easy-to-handle (67Ga, with the previously described (67Ga-DOTA complex conjugated bisphosphonate, (67Ga-DOTA-Bn-SCN-HBP. After synthesizing DOTA-(Aspn by a Fmoc-based solid-phase method, complexes were formed with (67Ga, resulting in (67Ga-DOTA-(Aspn with a radiochemical purity of over 95% after HPLC purification. In hydroxyapatite binding assays, the binding rate of (67Ga-DOTA-(Aspn increased with the increase in the length of the conjugated aspartate peptide. Moreover, in biodistribution experiments, (67Ga-DOTA-(Asp8, (67Ga-DOTA-(Asp11, and (67Ga-DOTA-(Asp14 showed high accumulation in bone (10.5 ± 1.5, 15.1 ± 2.6, and 12.8 ± 1.7% ID/g, respectively but were barely observed in other tissues at 60 min after injection. Although bone accumulation of (67Ga-DOTA-(Aspn was lower than that of (67Ga-DOTA-Bn-SCN-HBP, blood clearance of (67Ga-DOTA-(Aspn was more rapid. Accordingly, the bone/blood ratios of (67Ga-DOTA-(Asp11 and (67Ga-DOTA-(Asp14 were comparable with those of (67Ga-DOTA-Bn-SCN-HBP. In conclusion, these data provide useful insights into the drug design of (68Ga-PET tracers for the diagnosis of bone disorders, such as bone metastases.

  10. Special raster scanning for reduction of charging effects in scanning electron microscopy.

    Science.gov (United States)

    Suzuki, Kazuhiko; Oho, Eisaku

    2014-01-01

    A special raster scanning (SRS) method for reduction of charging effects is developed for the field of SEM. Both a conventional fast scan (horizontal direction) and an unusual scan (vertical direction) are adopted for acquiring raw data consisting of many sub-images. These data are converted to a proper SEM image using digital image processing techniques. About sharpness of the image and reduction of charging effects, the SRS is compared with the conventional fast scan (with frame-averaging) and the conventional slow scan. Experimental results show the effectiveness of SRS images. By a successful combination of the proposed scanning method and low accelerating voltage (LV)-SEMs, it is expected that higher-quality SEM images can be more easily acquired by the considerable reduction of charging effects, while maintaining the resolution. © 2013 Wiley Periodicals, Inc.

  11. Scan path entropy and Arrow plots: Capturing scanning behavior of multiple observers

    Directory of Open Access Journals (Sweden)

    Ignace T C Hooge

    2013-12-01

    Full Text Available Designers of visual communication material want their material to attract and retain attention. In marketing research, heat maps, dwell time, and time to AOI first hit are often used as evaluation parameters. Here we present two additional measures 1 scan path entropy to quantify gaze guidance and 2 the arrow plot to visualize the average scan path. Both are based on string representations of scan paths. The latter also incorporates transition matrices and time required for 50% of the observers to first hit AOIs (T50. The new measures were tested in an eye tracking study (48 observers, 39 advertisements. Scan path entropy is a sensible measure for gaze guidance and the new visualization method reveals aspects of the average scan path and gives a better indication in what order global scanning takes place.

  12. Clinical evaluation of chest x-rays, gallium-67 scans and CT scans in sarcoidosis

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, S.; Maeda, T. (Kochi Medical School (Japan)); Itoh, K.; Yamamoto, Y.; Machida, K.

    1981-10-01

    A comparative study of the accuracy of chest X-rays, Gallium-67 scans and CT scans for mediastinal lymphadenopathy of pulmonary sarcoidosis was performed. The ability of each examination to detect the lymphadenopathy of following 5 lymph node groups was evaluated, such as paratracheal, aorto-pulmonic window, subcarinal and both hilar lymph nodes. The results on 5 patients indicated that in the detection of right paratracheal and subcarinal lymphadenopathy, Gallium scans and CT scans were more sensitive than chest x-rays. Chest x-rays and Gallium scans were superior than CT in detecting bilateral hilar lymphadenopathy. In the involvement of aorto-pulmonic window nodes, Gallium scans and chest x-rays were more informative than CT. Combination of these three examination is effective in the detection of the above described lymphadenopathy.

  13. Postprocessing Algorithm for Driving Conventional Scanning Tunneling Microscope at Fast Scan Rates

    Directory of Open Access Journals (Sweden)

    Hao Zhang

    2017-01-01

    Full Text Available We present an image postprocessing framework for Scanning Tunneling Microscope (STM to reduce the strong spurious oscillations and scan line noise at fast scan rates and preserve the features, allowing an order of magnitude increase in the scan rate without upgrading the hardware. The proposed method consists of two steps for large scale images and four steps for atomic scale images. For large scale images, we first apply for each line an image registration method to align the forward and backward scans of the same line. In the second step we apply a “rubber band” model which is solved by a novel Constrained Adaptive and Iterative Filtering Algorithm (CIAFA. The numerical results on measurement from copper(111 surface indicate the processed images are comparable in accuracy to data obtained with a slow scan rate, but are free of the scan drift error commonly seen in slow scan data. For atomic scale images, an additional first step to remove line-by-line strong background fluctuations and a fourth step of replacing the postprocessed image by its ranking map as the final atomic resolution image are required. The resulting image restores the lattice image that is nearly undetectable in the original fast scan data.

  14. Comparison of the VISX WaveScan and OPD-Scan Ⅲ with the subjective refraction

    Directory of Open Access Journals (Sweden)

    Ran Zhu

    2014-10-01

    Full Text Available AIM: To compare the refractive errors measured by the VISX WaveScan, OPD-Scan Ⅲ and the subjective refraction.METHODS: Seventy-six patients(152 eyeswere recruited from January 2013 to December 2013. All patients were measured with subjective refraction by the phoropter(NIDEK, RT-5 100, objective refraction by the WaveScan(AMO Company, USA, OPD-Scan Ⅲ(Nidek Technologies, Japan. The sphere, cylinder, axis of the three methods were compared and analyzed.RESULTS: The sphere measured by WaveScan was lower than that by subjective refraction, the difference was 0.13±0.30D(t=3.753, Pt=3.664, PP>0.05. The value of the difference between WaveScan and subjective refraction was 5.87°±6.19° for the axis and the difference between OPD-Scan Ⅲ and subjective refraction was 3.82°±3.95°. There was statistic significance(t=2.817, P=0.006. CONCLUSION: For sphere and cylinder,WaveScan generated some deviation relative to subjective refraction. The Nidek OPD-Scan Ⅲ gives more accurate measures of objective refraction when compared with subjective refraction.

  15. Anticipating, measuring, and minimizing MEMS mirror scan error to improve laser scanning microscopy's speed and accuracy.

    Science.gov (United States)

    Giannini, John P; York, Andrew G; Shroff, Hari

    2017-01-01

    We describe a method to speed up microelectromechanical system (MEMS) mirror scanning by > 20x, while also improving scan accuracy. We use Landweber deconvolution to determine an input voltage which would produce a desired output, based on the measured MEMS impulse response. Since the MEMS is weakly nonlinear, the observed behavior deviates from expectations, and we iteratively improve our input to minimize this deviation. This allows customizable MEMS angle vs. time with <1% deviation from the desired scan pattern. We demonstrate our technique by optimizing a point scanning microscope's raster patterns to image mammal submandibular gland and pollen at ~10 frames/s.

  16. About infrared scanning of photovoltaic solar plant

    Science.gov (United States)

    Kauppinen, T.; Panouillot, P.-E.; Siikanen, S.; Athanasakou, E.; Baltas, P.; Nikopoulous, B.

    2015-05-01

    The paper is discussing about infrared scanning of PV solar plants. It is important that the performance of each solar panel and cell is verified. One new possibility compared to traditional ground-based scanning (handheld camera) is the utilization of UAV (Unmanned Aerial Vehicle). In this paper results from a PV solar Plant in Western Greece are introduced. The nominal power of the solar plants were 0, 9 MW and 2 MW and they were scanned both by a ground-controlled drone and by handheld equipment. It is essential to know all the factors effecting to results and also the time of scanning is important. The results done from the drone and from ground-based scanning are compared; also results from various altitudes and time of day are discussed. The UAV (Unmanned Aerial Vehicle/RPAS (Remote Piloted Aircraft Systems) will give an excellent opportunity to monitor various targets which are impossible or difficult to access from the ground. Compared to fixed-wing and helicopter-based platforms it will give advantages but also this technology has limitations. One limitation is the weight of the equipment and the short operational range and short flight time. Also valid procedures must be created for different solutions in the future. The most important thing, as in all infrared thermography applications, is the proper interpretation of results.

  17. Scanning-time evaluation of Digimarc Barcode

    Science.gov (United States)

    Gerlach, Rebecca; Pinard, Dan; Weaver, Matt; Alattar, Adnan

    2015-03-01

    This paper presents a speed comparison between the use of Digimarc® Barcodes and the Universal Product Code (UPC) for customer checkout at point of sale (POS). The recently introduced Digimarc Barcode promises to increase the speed of scanning packaged goods at POS. When this increase is exploited by workforce optimization systems, the retail industry could potentially save billions of dollars. The Digimarc Barcode is based on Digimarc's watermarking technology, and it is imperceptible, very robust, and does not require any special ink, material, or printing processes. Using an image-based scanner, a checker can quickly scan consumer packaged goods (CPG) embedded with the Digimarc Barcode without the need to reorient the packages with respect to the scanner. Faster scanning of packages saves money and enhances customer satisfaction. It reduces the length of the queues at checkout, reduces the cost of cashier labor, and makes self-checkout more convenient. This paper quantifies the increase in POS scanning rates resulting from the use of the Digimarc Barcode versus the traditional UPC. It explains the testing methodology, describes the experimental setup, and analyzes the obtained results. It concludes that the Digimarc Barcode increases number of items per minute (IPM) scanned at least 50% over traditional UPC.

  18. Conductivity map from scanning tunneling potentiometry.

    Science.gov (United States)

    Zhang, Hao; Li, Xianqi; Chen, Yunmei; Durand, Corentin; Li, An-Ping; Zhang, X-G

    2016-08-01

    We present a novel method for extracting two-dimensional (2D) conductivity profiles from large electrochemical potential datasets acquired by scanning tunneling potentiometry of a 2D conductor. The method consists of a data preprocessing procedure to reduce/eliminate noise and a numerical conductivity reconstruction. The preprocessing procedure employs an inverse consistent image registration method to align the forward and backward scans of the same line for each image line followed by a total variation (TV) based image restoration method to obtain a (nearly) noise-free potential from the aligned scans. The preprocessed potential is then used for numerical conductivity reconstruction, based on a TV model solved by accelerated alternating direction method of multiplier. The method is demonstrated on a measurement of the grain boundary of a monolayer graphene, yielding a nearly 10:1 ratio for the grain boundary resistivity over bulk resistivity.

  19. Conductivity map from scanning tunneling potentiometry

    Science.gov (United States)

    Zhang, Hao; Li, Xianqi; Chen, Yunmei; Durand, Corentin; Li, An-Ping; Zhang, X.-G.

    2016-08-01

    We present a novel method for extracting two-dimensional (2D) conductivity profiles from large electrochemical potential datasets acquired by scanning tunneling potentiometry of a 2D conductor. The method consists of a data preprocessing procedure to reduce/eliminate noise and a numerical conductivity reconstruction. The preprocessing procedure employs an inverse consistent image registration method to align the forward and backward scans of the same line for each image line followed by a total variation (TV) based image restoration method to obtain a (nearly) noise-free potential from the aligned scans. The preprocessed potential is then used for numerical conductivity reconstruction, based on a TV model solved by accelerated alternating direction method of multiplier. The method is demonstrated on a measurement of the grain boundary of a monolayer graphene, yielding a nearly 10:1 ratio for the grain boundary resistivity over bulk resistivity.

  20. Investigation into scanning tunnelling luminescence microscopy

    CERN Document Server

    Manson-Smith, S K

    2001-01-01

    This work reports on the development of a scanning tunnelling luminescence (STL) microscope and its application to the study of Ill-nitride semiconductor materials used in the production of light emitting devices. STL microscopy is a technique which uses the high resolution topographic imaging capabilities of the scanning tunnelling microscope (STM) to generate high resolution luminescence images. The STM tunnelling current acts as a highly localised source of electrons (or holes) which generates luminescence in certain materials. Light generated at the STM tunnelling junction is collected concurrently with the height variation of the tunnelling probe as it is scanned across a sample surface, producing simultaneous topographic and luminescence images. Due to the very localised excitation source, high resolution luminescence images can be obtained. Spectroscopic resolution can be obtained by using filters. Additionally, the variation of luminescence intensity with tunnel current and with bias voltage can provi...

  1. Human performance in radiological survey scanning

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Abelquist, E.W. [Oak Ridge Inst. for Science and Education, TN (United States)

    1998-03-01

    The probability of detecting residual contamination in the field using portable radiological survey instruments depends not only on the sensitivity of the instrumentation used in scanning, but also on the surveyor`s performance. This report provides a basis for taking human performance into account in determining the minimum level of activity detectable by scanning. A theoretical framework was developed (based on signal detection theory) which allows influences on surveyors to be anticipated and understood, and supports a quantitative assessment of performance. The performance of surveyors under controlled yet realistic field conditions was examined to gain insight into the task and to develop means of quantifying performance. Then, their performance was assessed under laboratory conditions to quantify more precisely their ability to make the required discriminations. The information was used to characterize surveyors` performance in the scanning task and to provide a basis for predicting levels of radioactivity that are likely to be detectable under various conditions by surveyors using portable survey instruments.

  2. MutScan: fast detection and visualization of target mutations by scanning FASTQ data.

    Science.gov (United States)

    Chen, Shifu; Huang, Tanxiao; Wen, Tiexiang; Li, Hong; Xu, Mingyan; Gu, Jia

    2018-01-22

    Some types of clinical genetic tests, such as cancer testing using circulating tumor DNA (ctDNA), require sensitive detection of known target mutations. However, conventional next-generation sequencing (NGS) data analysis pipelines typically involve different steps of filtering, which may cause miss-detection of key mutations with low frequencies. Variant validation is also indicated for key mutations detected by bioinformatics pipelines. Typically, this process can be executed using alignment visualization tools such as IGV or GenomeBrowse. However, these tools are too heavy and therefore unsuitable for validating mutations in ultra-deep sequencing data. We developed MutScan to address problems of sensitive detection and efficient validation for target mutations. MutScan involves highly optimized string-searching algorithms, which can scan input FASTQ files to grab all reads that support target mutations. The collected supporting reads for each target mutation will be piled up and visualized using web technologies such as HTML and JavaScript. Algorithms such as rolling hash and bloom filter are applied to accelerate scanning and make MutScan applicable to detect or visualize target mutations in a very fast way. MutScan is a tool for the detection and visualization of target mutations by only scanning FASTQ raw data directly. Compared to conventional pipelines, this offers a very high performance, executing about 20 times faster, and offering maximal sensitivity since it can grab mutations with even one single supporting read. MutScan visualizes detected mutations by generating interactive pile-ups using web technologies. These can serve to validate target mutations, thus avoiding false positives. Furthermore, MutScan can visualize all mutation records in a VCF file to HTML pages for cloud-friendly VCF validation. MutScan is an open source tool available at GitHub: https://github.com/OpenGene/MutScan.

  3. Tree Height Growth Measurement with Single-Scan Airborne, Static Terrestrial and Mobile Laser Scanning

    Directory of Open Access Journals (Sweden)

    Yi Lin

    2012-09-01

    Full Text Available This study explores the feasibility of applying single-scan airborne, static terrestrial and mobile laser scanning for improving the accuracy of tree height growth measurement. Specifically, compared to the traditional works on forest growth inventory with airborne laser scanning, two issues are regarded: “Can the new technique characterize the height growth for each individual tree?” and “Can this technique refine the minimum growth-discernable temporal interval further?” To solve these two puzzles, the sampling principles of the three laser scanning modes were first examined, and their error sources against the task of tree-top capturing were also analyzed. Next, the three-year growths of 58 Nordic maple trees (Crimson King for test were intermittently surveyed with one type of laser scanning each time and then analyzed by statistics. The evaluations show that the height growth of each individual tree still cannot be reliably characterized even by single-scan terrestrial laser scanning, and statistical analysis is necessary in this scenario. After Gaussian regression, it is found that the minimum temporal interval with distinguishable tree height growths can be refined into one month based on terrestrial laser scanning, far better than the two years deduced in the previous works based on airborne laser scanning. The associated mean growth was detected to be about 0.12 m. Moreover, the parameter of tree height generally under-estimated by airborne and even mobile laser scanning can be relatively revised by means of introducing static terrestrial laser scanning data. Overall, the effectiveness of the proposed technique is primarily validated.

  4. A Scanning Microwave Radar and Radiometer

    DEFF Research Database (Denmark)

    Skou, Niels

    1995-01-01

    The Scanning Microwave Radar and Radiometer (SMRR) is a line scanner featuring a combined radar and radiometer system operating around 35 and 94 GHz. The layout of the SMRR is shown. The 2 offset antenna parabolas scan in synchronism, the receiver antenna has the highest gain in order to ensure...... that footprints are identical for the radar and the radiometer. The instrument will be flown in a pod under a Gulfstream G3 normally cruising with 240 m/sec at 12500 m, and will thus be able to sense clouds and precipitation from above...

  5. Gallium-67 citrate scan in extrapulmonary tuberculosis

    Energy Technology Data Exchange (ETDEWEB)

    Lin Wanyu [Taichung Veterans General Hospital (Taiwan). Dept. of Nuclear Medicine; Hsieh Jihfang [Chi-Mei Foundation Hospital, Tainan (Taiwan)

    1999-07-01

    Aim: Whole-body gallium scan was performed to evaluate the usefulness of gallium scan for detecting extrapulmonary tuberculosis (TB) lesions. Methods: Thirty-seven patients with extrapulmonary TB were included in this study. Four patients were found to have two lesions. Totally, 41 lesions were identified, including 19 TB arthritis, 8 spinal TB, 5 TB meningitis, 3 TB lymphadenopathy, 2 TB pericarditis, 1 TB peritonitis, 1 intestinal TB, 1 skin TB and 1 renal TB. Results: Of the 41 extrapulmonary TB lesions, gallium scan detected 32 lesions with a sensitivity of 78%. All the patients with TB meningitis showed negative gallium scan. When the five cases of TB meningitis were excluded, the detection sensitivity of gallium scan increased to 88.9% (32/36). Conclusion: Our data revealed that gallium scan is a convenient and useful method for evaluating extrapulmonary TB lesions other than TB-meningitis. We suggest that gallium scan be included in the clinical routine for patients with suspected extrapulmonary TB. (orig.) [German] Ziel: Es wurden Ganzkoerper-Gallium-Szintigramme angefertigt, um den Nutzen der Gallium-Szintigraphie zur Erfassung von extrapulmonalen Tuberkuloseherden (TB) zu erfassen. Methoden: 37 Patienten mit extrapulmonaler TB wurden eingeschlossen. 4 Patienten hatten 2 Laesionen. Insgesamt wurden 41 Laesionen identifiziert, hierunter 19 TB-Arthritis, 8 spinale TB, 5 TB-Meningitis, 3 TB-Lymphadenopathie, 2 TB-Perikarditis, 1 TB-Peritonitis, 1 intestinale TB, 1 Haut-TB und eine Nieren-TB. Ergebnisse: Von den 41 extrapulmonalen TB-Herden erfasste die Gallium-Szintigraphie 32 Herde mit einer Sensitivitaet von 78%. Alle Patienten mit TB-Meningitis zeigten einen negativen Gallium-Scan. Wenn die 5 Faelle mit TB-Meningitis ausgeschlossen wurden, stieg die Sensitivititaet der Gallium-Szintigraphie auf 88,9% (32/36). Schlussfolgerung: Die Daten zeigen, dass die Gallium-Szintigraphie eine einfache und nuetzliche Methode zur Erfassung extrapulmonaler TB-Herde ist

  6. inner-sphere complexation of cations at the rutile-water interface: A concise surface structural interpretation with the CD and MUSIC model

    Energy Technology Data Exchange (ETDEWEB)

    Ridley, Mora K. [Texas Tech University, Lubbock; Hiemstra, T [Oak Ridge National Laboratory (ORNL); Van Riemsdijk, Willem H. [Wageningen University and Research Centre, The Netherlands; Machesky, Michael L. [Illinois State Water Survey, Champaign, IL

    2009-01-01

    Acid base reactivity and ion-interaction between mineral surfaces and aqueous solutions is most frequently investigated at the macroscopic scale as a function of pH. Experimental data are then rationalized by a variety of surface complexation models. These models are thermodynamically based which in principle does not require a molecular picture. The models are typically calibrated to relatively simple solid-electrolyte solution pairs and may provide poor descriptions of complex multicomponent mineral aqueous solutions, including those found in natural environments. Surface complexation models may be improved by incorporating molecular-scale surface structural information to constrain the modeling efforts. Here, we apply a concise, molecularly-constrained surface complexation model to a diverse suite of surface titration data for rutile and thereby begin to address the complexity of multi-component systems. Primary surface charging curves in NaCl, KCl, and RbCl electrolyte media were fit simultaneously using a charge distribution (CD) and multisite complexation (MUSIC) model [Hiemstra T. and Van Riemsdijk W. H. (1996) A surface structural approach to ion adsorption: the charge distribution (CD) model. J. Colloid Interf. Sci. 179, 488 508], coupled with a Basic Stern layer description of the electric double layer. In addition, data for the specific interaction of Ca2+ and Sr2+ with rutile, in NaCl and RbCl media, were modeled. In recent developments, spectroscopy, quantum calculations, and molecular simulations have shown that electrolyte and divalent cations are principally adsorbed in various inner-sphere configurations on the rutile 110 surface [Zhang Z., Fenter P., Cheng L., Sturchio N. C., Bedzyk M. J., Pr edota M., Bandura A., Kubicki J., Lvov S. N., Cummings P. T., Chialvo A. A., Ridley M. K., Be ne zeth P., Anovitz L., Palmer D. A., Machesky M. L. and Wesolowski D. J. (2004) Ion adsorption at the rutile water interface: linking molecular and macroscopic

  7. Ionizing Radiation and Human Gender Proportion at Birth: A Concise Review of the Literature and A Complementary Analysis of Historical and Recent Data

    Directory of Open Access Journals (Sweden)

    Eslami J.

    2017-12-01

    Full Text Available Dear Editor, This letter considers an article by Scherb et al. entitled “Ionizing radiation and the human gender proportion at birth: A concise review of the literature and a complementary analysis of historical and recent data” published in Early Human Development (DOI: http://dx.doi.org/10.1016/j.earlhumdev.2015.10.012 [1]. The authors of this challenging paper have reviewed the literature regarding the effect of exposure to ionizing radiation on gender ratio at birth. Scherb et al. have stated that above-thebackground levels of ionizing radiation may alter the gender ratio at birth: “We are of the strong opinion that gradually increasing the level of background radiation poses an increased genetic risk to humans and creature and that more research should be initiated in this respect. This has implications for the nuclear power industry, and emphasizes the importance of finding safe methods for processing and storing nuclear waste”. They also claimed that the data they presented confirm the existence of an impact of ionizing radiation on human secondary sex. This paper bears a very basic shortcoming. We know that at present, the level of natural background radiation varies on Earth at least two orders of magnitude [2]. Mortazavi et al. have previously published reports on the health effects of exposure to elevated levels of natural ionizing radiation in HBNRAs of Ramsar [2-6]. While radiation level in Ramsar is up to 260 mSv y−1 (the highest background radiation levels known among inhabited areas, up to 13 times higher than the recommended dose limit for radiation workers in Iran that is 20 mSv y−1, people living in high background radiation areas of Ramsar show no observable detrimental effect. It is worth mentioning that if a radiation dose of a few hundred mSv per year has adverse health effects and causes genetic abnormalities or an increased risk of cancer, it should be evident to the residents of these hot areas [6]. Moreover

  8. [Fast 2-dimension scanning and line-scanning of intracellular Ca2+ transients in cardiac myocytes].

    Science.gov (United States)

    Shen, Jian-xin; Wang, Hai-yan; Li, Chao-yan; Xiao, Jian-feng

    2008-11-01

    Fast 2-dimension scanning and line-scanning of confocal imaging were employed for measurement of cardiac Ca2+ transients, and the advantages and disadvantages about these two scannings were discussed. Single adult SD rat cardiac myocytes were made freshly and loaded with fluo4-AM. Intracellular Ca2+ was imaging by the LSMS10 META system. The Ca2+ transients were evoked by electrical field stimulation from an electronic stimulator which was triggered to work synchronically with the confocal imaging system. Fast 2-dimension scanning showed the global Ca2+ signal clearly, which would be more helpful especially in monitoring a cell of Ca2+ overload or in other pathological conditions. And the images could be packaged into a vivid animation, which showed the process of Ca2+ transients and cell contraction visually and virtually. Line-scanning showed the Ca2+ transients in good temporal and spacial resolutions along the long axis of the cell. And the dynamic shortening of the cell length could be used for indicating the contraction of the cell. Data from line-scanning would be helpful for drawing some more exact conclusions. In general, fast 2-dimension scanning and line-scanning could work reciprocally to show a more perfect picture of the intracellular Ca2+ transients in cardiac myocytes.

  9. High-speed Lissajous-scan atomic force microscopy: Scan pattern planning and control design issues

    Science.gov (United States)

    Bazaei, A.; Yong, Yuen K.; Moheimani, S. O. Reza

    2012-06-01

    Tracking of triangular or sawtooth waveforms is a major difficulty for achieving high-speed operation in many scanning applications such as scanning probe microscopy. Such non-smooth waveforms contain high order harmonics of the scan frequency that can excite mechanical resonant modes of the positioning system, limiting the scan range and bandwidth. Hence, fast raster scanning often leads to image distortion. This paper proposes analysis and design methodologies for a nonlinear and smooth closed curve, known as Lissajous pattern, which allows much faster operations compared to the ordinary scan patterns. A simple closed-form measure is formulated for the image resolution of the Lissajous pattern. This enables us to systematically determine the scan parameters. Using internal model controllers (IMC), this non-raster scan method is implemented on a commercial atomic force microscope driven by a low resonance frequency positioning stage. To reduce the tracking errors due to actuator nonlinearities, higher order harmonic oscillators are included in the IMC controllers. This results in significant improvement compared to the traditional IMC method. It is shown that the proposed IMC controller achieves much better tracking performances compared to integral controllers when the noise rejection performances is a concern.

  10. The Scanning Theremin Microscope: A Model Scanning Probe Instrument for Hands-On Activities

    Science.gov (United States)

    Quardokus, Rebecca C.; Wasio, Natalie A.; Kandel, S. Alex

    2014-01-01

    A model scanning probe microscope, designed using similar principles of operation to research instruments, is described. Proximity sensing is done using a capacitance probe, and a mechanical linkage is used to scan this probe across surfaces. The signal is transduced as an audio tone using a heterodyne detection circuit analogous to that used in…

  11. Scan posture definition and hip girth measurement: the impact on clothing design and body scanning.

    Science.gov (United States)

    Gill, Simeon; Parker, Christopher J

    2017-08-01

    Ergonomic measurement is central to product design and development; especially for body worn products and clothing. However, there is a large variation in measurement definitions, complicated by new body scanning technology that captures measurements in a posture different to traditional manual methods. Investigations of hip measurement definitions in current clothing measurement practices supports analysis of the effect of scan posture and hip measurement definition on the circumferences of the hip. Here, the hip girth is a key clothing measurement that is not defined in current body scanning measurement standards. Sixty-four participants were scanned in the standard scan posture of a [TC] 2 body scanner, and also in a natural posture similar to that of traditional manual measurement collection. Results indicate that scan posture affects hip girth circumferences, and that some current clothing measurement practices may not define the largest lower body circumference. Recommendations are made concerning how the hip is defined in measurement practice and within body scanning for clothing product development. Practitioner Summary: The hip girth is an important measurement in garment design, yet its measurement protocol is not currently defined. We demonstrate that body posture during body scanning affects hip circumferences, and that current clothing measurement practices may not define the largest lower body circumference. This paper also provides future measurement practice recommendations.

  12. Lumber Scanning System for Surface Defect Detection

    Science.gov (United States)

    D. Earl Kline; Y. Jason Hou; Richard W. Conners; Daniel L. Schmoldt; Philip A. Araman

    1992-01-01

    This paper describes research aimed at developing a machine vision technology to drive automated processes in the hardwood forest products manufacturing industry. An industrial-scale machine vision system has been designed to scan variable-size hardwood lumber for detecting important features that influence the grade and value of lumber such as knots, holes, wane,...

  13. Internet access to scanned paper documents

    NARCIS (Netherlands)

    Worring, M.; Smeulders, A.W.M.; Witten, I.; Akscyn, R.; Shipman, F.M.

    1998-01-01

    In this contribution we identify the different structures to encounterin a hyperdocument. Methods are described for deriving those structures from scanned paper originals. The content and structure of the document is then made available in a form suited for an Internet browser. It provides

  14. Fiber coupled ultrafast scanning tunneling microscope

    DEFF Research Database (Denmark)

    Keil, Ulrich Dieter Felix; Jensen, Jacob Riis; Hvam, Jørn Märcher

    1997-01-01

    We report on a scanning tunneling microscope with a photoconductive gate in the tunneling current circuit. The tunneling tip is attached to a coplanar transmission line with an integrated photoconductive switch. The switch is illuminated through a fiber which is rigidly attached to the switch...

  15. Nanobits - exchangable and customisable scanning probe tips

    DEFF Research Database (Denmark)

    Yildiz, Izzet

    Invention of atomic force microscopy (AFM) pioneered a novel aspect for the surface metrology concept. A range of scanning probe methods have been developed over the years based on different sorts of tip-surface interaction: electrical, optical, thermal, force. Reproducible and fast fabrication...

  16. Digital weight watching: reconstruction of scanned documents

    NARCIS (Netherlands)

    Gielissen, T.; Marx, M.

    2009-01-01

    Scanned and OCRed data leads to large file sizes if facsimile images are included. This makes storage of, and providing online access to large data sets costly. Manually analyzing such data is cumbersome because of long download and processing times. It may thus be advantageous to reconstruct the

  17. Digital weight watching: reconstruction of scanned documents

    NARCIS (Netherlands)

    Marx, M.; Gielissen, T.

    2011-01-01

    A web portal providing access to over 250.000 scanned and OCRed cultural heritage documents is analyzed. The collection consists of the complete Dutch Hansard from 1917 to 1995. Each document consists of facsimile images of the original pages plus hidden OCRed text. The inclusion of images yields

  18. Remote Identification of Port Scan Toolchains

    NARCIS (Netherlands)

    Ghiëtte, Vincent; Blenn, N.; Doerr, C.; Badra, Mohamad; Pau, Giovanni; Vassiliou, Vasos

    2016-01-01

    Port scans are typically at the begin of a chain of events that will lead to the attack and exploitation of a host over a network. Since building an effective defense relies on information what kind of threat an organization is facing, threat intelligence outlining an actor’s modus operandi is a

  19. SCANNING KELVIN PROBE APPLIED TO LOCALISED ...

    African Journals Online (AJOL)

    2015-01-15

    Jan 15, 2015 ... SCANNING KELVIN PROBE APPLIED TO LOCALISED CORROSION. A. Hussain and Sk M. Haque. Department of Chemical Engineering and Process Technology, Jubail Industrial College,. P. O. Box. 10099, Al-Jubail, KSA. Received: 19 October 2014 / Accepted: 12 January 2015 / Published online: 15 ...

  20. Role of bone scanning in neonatal rickets

    Energy Technology Data Exchange (ETDEWEB)

    Saul, P.D.; Lloyd, D.J.; Smith, F.W.

    1983-03-01

    Preterm infants are at increased risk from rickets. Radionuclide bone scanning is a useful aid in suspected cases. It offers advantages over conventional radiology in terms of sensitivity, radiation dose and extent of examination. Unsuspected fractures of clinical or medicolegal significance may be detected. Two cases are described in which the technique confirmed the diagnosis and assisted management.

  1. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... More Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading Does Eating Turkey ... CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands ...

  2. Semiconductor Surface Characterization by Scanning Probe Microscopies

    Science.gov (United States)

    2001-01-01

    potentiometry (STP)8 and ballistic electron emission microscopy (BEEM)9 which allow mapping of lateral surface potential and local subsurface Schottky...A.P.Fein. "Tunneling Spectroscopy of the Si(1 1 1)2xl Surface", Surf.Sci. 181, 295- 306, 1987. 8. P.Muralt, D.W.Pohl, "Scanning tunneling potentiometry

  3. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... scanner takes computer pictures of what's going on inside your body. The scan itself is painless. All you'll need to do is hold still for a few minutes at a time so the pictures come out clear. About KidsHealth Nemours.org Reading BrightStart! Contact ...

  4. Parallel line scanning ophthalmoscope for retinal imaging

    NARCIS (Netherlands)

    Vienola, K.V.; Damodaran, M.; Braaf, B.; Vermeer, K.A.; de Boer, J.F.

    2015-01-01

    A parallel line scanning ophthalmoscope (PLSO) is presented using a digital micromirror device (DMD) for parallel confocal line imaging of the retina. The posterior part of the eye is illuminated using up to seven parallel lines, which were projected at 100 Hz. The DMD offers a high degree of

  5. Laser scan with upstream crystal #1

    CERN Document Server

    Gyr, Marcel

    1996-01-01

    A laser scan was performed with the new U-shaped crystal G5, which has a known miscut of +1 mrad and is installed at the upstream position #1 in the TEC. The aim was to cross-check the angular sensitivity of the stepping motor of the goniometer, which theoretically should be 1.98 µrad/step.

  6. Scanning Ion Conductance Microscopy of Live Keratinocytes

    Science.gov (United States)

    Hegde, V.; Mason, A.; Saliev, T.; Smith, F. J. D.; McLean, W. H. I.; Campbell, P. A.

    2012-07-01

    Scanning ion conductance microscopy (SICM) is perhaps the least well known technique from the scanning probe microscopy (SPM) family of instruments. As with its more familiar counterpart, atomic force microscopy (AFM), the technique provides high-resolution topographic imaging, with the caveat that target structures must be immersed in a conducting solution so that a controllable ion current may be utilised as the basis for feedback. In operation, this non-contact characteristic of SICM makes it ideal for the study of delicate structures, such as live cells. Moreover, the intrinsic architecture of the instrument, incorporating as it does, a scanned micropipette, lends itself to combination approaches with complementary techniques such as patch-clamp electrophysiology: SICM therefore boasts the capability for both structural and functional imaging. For the present observations, an ICnano S system (Ionscope Ltd., Melbourn, UK) operating in 'hopping mode' was used, with the objective of assessing the instrument's utility for imaging live keratinocytes under physiological buffers. In scans employing cultured HaCaT cells (spontaneously immortalised, human keratinocytes), we compared the qualitative differences of live cells imaged with SICM and AFM, and also with their respective counterparts after chemical fixation in 4% paraformaldehyde. Characteristic surface microvilli were particularly prominent in live cell imaging by SICM. Moreover, time lapse SICM imaging on live cells revealed that changes in the pattern of microvilli could be tracked over time. By comparison, AFM imaging on live cells, even at very low contact forces (monitoring the most delicate living structures with attendant high spatial resolutions.

  7. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading About Recipes for Kids With Diabetes Can ... Do I Help a Kid Who's Bullied? Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a ...

  8. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... More Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading Taking Charge of ... CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands ...

  9. Multiplatform Mobile Laser Scanning: Usability and Performance

    Directory of Open Access Journals (Sweden)

    Yuwei Chen

    2012-08-01

    Full Text Available Mobile laser scanning is an emerging technology capable of capturing three-dimensional data from surrounding objects. With state-of-the-art sensors, the achieved point clouds capture object details with good accuracy and precision. Many of the applications involve civil engineering in urban areas, as well as traffic and other urban planning, all of which serve to make 3D city modeling probably the fastest growing market segment in this field. This article outlines multiplatform mobile laser scanning solutions such as vehicle- and trolley-operated urban area data acquisition, and boat-mounted equipment for fluvial environments. Moreover, we introduce a novel backpack version of mobile laser scanning equipment for surveying applications in the field of natural sciences where the requirements include precision and mobility in variable terrain conditions. In addition to presenting a technical description of the systems, we discuss the performance of the solutions in the light of various applications in the fields of urban mapping and modeling, fluvial geomorphology, snow-cover characterization, precision agriculture, and in monitoring the effects of climate change on permafrost landforms. The data performance of the mobile laser scanning approach is described by the results of an evaluation of the ROAMER on a permanent MLS test field. Furthermore, an in situ accuracy assessment using a field of spherical 3D targets for the newly-introduced Akhka backpack system is conducted and reported on.

  10. Scanning electron microscopy study of Trichomonas gallinae.

    Science.gov (United States)

    Tasca, Tiana; De Carli, Geraldo A

    2003-12-01

    A scanning electron microscopy (SEM) study of Trichomonas gallinae (Rivolta, 1878), provided more information about the morphology of this flagellated protozoan. SEM showed the morphological features of the trophozoites; the emergence of the anterior flagella, the structure of the undulating membrane, the position and shape of the pelta, axostyle and posterior flagellum. Of special interest were the pseudocyst forms.

  11. Directional light scanning 3-D display

    Science.gov (United States)

    Aoki, Yoji; Horimai, Hideyoshi; Lim, Pang Boey; Watanabe, Kenjiro; Inoue, Mitsuteru

    2009-11-01

    This paper presents a new Three-Dimensional display method, so called Directional Light Scanning 3D display. By using holographic screen as a beam scanner and high frame rate Spatial Light Modulator (SLM), this method requires only one SLM but can display high resolution 3D images, solving the usual problem of lack of resolution.

  12. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... More Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading How to Be ... CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands ...

  13. On cylindrical near-field scanning techniques

    DEFF Research Database (Denmark)

    Appel-Hansen, Jørgen

    1980-01-01

    The agreement between the coupling equations obtained in the literature by using the reciprocity theorem and the scattering matrix formulation is demonstrated. The field is expanded in cylindrical vector wave functions and the addition theorem for these functions is used. The communication may se...... serve as a tutorial introduction to the cylindrical scanning techniques....

  14. Routine diagnostic antenatal ultrasound scan: knowledge and ...

    African Journals Online (AJOL)

    Objective: The aim of this study is to determine the knowledge and perception of pregnant women about antenatal ultrasound scan USS). It is also to determine factors that influence why women seek to do USS in pregnancy and the reasons for choosing a facility for the service. Method: Questionnaires were administered to ...

  15. Projections of scan patterns on human retina

    Science.gov (United States)

    Kelly, D. H.; Crane, H. D.

    1972-01-01

    Fundus camera tracks eye movements by using camera optics with the aid of an inverted system. Camera provides a flying-spot circular scanning light source in the normal film plane and a broadband photodetector in position normally occupied by light source.

  16. Left Ventricular Pseudoaneurysm Found by CT Scan

    OpenAIRE

    Hirose, Hitoshi; Matsunaga, Iwao; Strong, Michael D

    2008-01-01

    A 62-year-old male with a previous coronary artery bypass grafting underwent CT scan for evaluation of left epigastric pain. Findings showed a large left ventricular pseudoaneurysm, which was subsequently confirmed by left ventriculogram. The pseudoaneurysm was successfully repaired surgically.

  17. Computed Tomography Scan and ICD Interaction

    Directory of Open Access Journals (Sweden)

    Jose M. Porres

    2009-01-01

    Full Text Available Although it has been considered a safe procedure, computed tomography scanning uses high doses of radiation and can cause malfunctioning in those patients with ICD when the radiation is directly incident on the device. We present a case of ventricular oversensing during a thoracic computed tomography.

  18. Scanning laser microscope for biological investigations.

    Science.gov (United States)

    Davidovits, P; Egger, M D

    1971-07-01

    The theory and design of a special purpose scanning laser microscope are described. This microscope, particularly suited for biological investigations, is intended for the observation of objects embedded within transparent or translucent bodies, such as nerve cells in an intact brain. Some photographs made with a prototype are shown.

  19. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... More Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading Should You Fight ... CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands ...

  20. A Scanning Quantum Cryogenic Atom Microscope

    Science.gov (United States)

    Lev, Benjamin

    Microscopic imaging of local magnetic fields provides a window into the organizing principles of complex and technologically relevant condensed matter materials. However, a wide variety of intriguing strongly correlated and topologically nontrivial materials exhibit poorly understood phenomena outside the detection capability of state-of-the-art high-sensitivity, high-resolution scanning probe magnetometers. We introduce a quantum-noise-limited scanning probe magnetometer that can operate from room-to-cryogenic temperatures with unprecedented DC-field sensitivity and micron-scale resolution. The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) employs a magnetically levitated atomic Bose-Einstein condensate (BEC), thereby providing immunity to conductive and blackbody radiative heating. The SQCRAMscope has a field sensitivity of 1.4 nT per resolution-limited point (2 um), or 6 nT / Hz1 / 2 per point at its duty cycle. Compared to point-by-point sensors, the long length of the BEC provides a naturally parallel measurement, allowing one to measure nearly one-hundred points with an effective field sensitivity of 600 pT / Hz1 / 2 each point during the same time as a point-by-point scanner would measure these points sequentially. Moreover, it has a noise floor of 300 pT and provides nearly two orders of magnitude improvement in magnetic flux sensitivity (down to 10- 6 Phi0 / Hz1 / 2) over previous atomic probe magnetometers capable of scanning near samples. These capabilities are for the first time carefully benchmarked by imaging magnetic fields arising from microfabricated wire patterns and done so using samples that may be scanned, cryogenically cooled, and easily exchanged. We anticipate the SQCRAMscope will provide charge transport images at temperatures from room to \\x9D4K in unconventional superconductors and topologically nontrivial materials.

  1. Validation of burst overlapping for ALOS-2 PALSAR-2 ScanSAR-ScanSAR interferometry

    Science.gov (United States)

    Natsuaki, Ryo; Motohka, Takeshi; Ohki, Masato; Watanabe, Manabu; Suzuki, Shinichi

    2016-10-01

    The Phased Array type L-band Synthetic Aperture Radar-2 (PALSAR-2) aboard the Advanced Land Observing Satellite- 2 (ALOS-2, "DAICHI-2") is the latest L-band spaceborne synthetic aperture radar (SAR). PALSAR-2 observes the world mainly with 10 m resolution / 70 km swath Stripmap mode and 25 m resolution / 350 km swath ScanSAR mode. The 3-m resolution Stripmap mode is mainly used upon Japan. 350 km ScanSAR observation could detect large scale deformation e.g., the Mw 7.8 Gorkha, Nepal earthquake and its aftershocks in 2015. ALOS-2 ScanSAR is the first one that supports ScanSAR-ScanSAR interferometry in L-band spaceborne SAR. However, because of the parameter setting error for the orbit estimation, ALOS-2 PALSAR-2 ScanSAR could achieve little number of interferometric pair until the software modification on February 8, 2015. That is, the burst overlap timing required for the interferometric analysis was insufficient and it depends on the observation date. In this paper, we report the investigation results of this case and discuss the current status of the ALOS-2 ScanSAR InSAR. Some archives achieved before February 8, 2015 can be used for interferometric analysis with after Feb. 8. However, most of them have no interferometric pair. We also report that the archives acquired after February 8, have enough burst overlapping.

  2. Bone scanning as a routine examination of patients with mammary carcinoma; a critical consideration. [Preoperative scanning

    Energy Technology Data Exchange (ETDEWEB)

    Heslinga, J.M.; Pauwels, E.K.J.; Zwaveling, A. (Rijksuniversiteit Leiden (Netherlands). Academisch Ziekenhuis)

    1982-06-05

    The usefulness of bone scanning as a routine examination was evaluated in 136 female patients with mammary carcinoma of whom 81 were staged as Columbia A and 55 as Columbia B/C. The preoperative bone scanning was positive in only 4 patients (2.9%). Consequently, bone scanning is no longer performed in the authors clinic for the preoperative detection of skeletal metastases. Bone scanning as a routine examination at 6-month intervals does not appear to be useful for the first 4 years of the follow-up, either. Most of the patients with a positive bone scan displayed other signs of skeletal metastases at the same time, such as ostealgia and a raised serum alkaline phosphatase level. Further increase of the frequency of bone scanning during the follow-up period would increase the costs considerably, almost prohibitively, even apart from the question whether such a measure might indeed significantly influence the patient's prognosis. The authors conclude that bone scanning should only be performed on the basis of the anamnesis, physical and laboratory findings, both prior to operation and during the follow-up period.

  3. Scanning tunneling microscopy III theory of STM and related scanning probe methods

    CERN Document Server

    Güntherodt, Hans-Joachim

    1996-01-01

    Scanning Tunneling Microscopy III provides a unique introduction to the theoretical foundations of scanning tunneling microscopy and related scanning probe methods. The different theoretical concepts developed in the past are outlined, and the implications of the theoretical results for the interpretation of experimental data are discussed in detail. Therefore, this book serves as a most useful guide for experimentalists as well as for theoreticians working in the filed of local probe methods. In this second edition the text has been updated and new methods are discussed.

  4. Codification of scan path parameters and development of perimeter scan strategies for 3D bowl-shaped laser forming

    Science.gov (United States)

    Tavakoli, A.; Naeini, H. Moslemi; Roohi, Amir H.; Gollo, M. Hoseinpour; Shahabad, Sh. Imani

    2018-01-01

    In the 3D laser forming process, developing an appropriate laser scan pattern for producing specimens with high quality and uniformity is critical. This study presents certain principles for developing scan paths. Seven scan path parameters are considered, including: (1) combined linear or curved path; (2) type of combined linear path; (3) order of scan sequences; (4) the position of the start point in each scan; (5) continuous or discontinuous scan path; (6) direction of scan path; and (7) angular arrangement of combined linear scan paths. Regarding these path parameters, ten combined linear scan patterns are presented. Numerical simulations show continuous hexagonal, scan pattern, scanning from outer to inner path, is the optimized. In addition, it is observed the position of the start point and the angular arrangement of scan paths is the most effective path parameters. Also, further experimentations show four sequences due to creat symmetric condition enhance the height of the bowl-shaped products and uniformity. Finally, the optimized hexagonal pattern was compared with the similar circular one. In the hexagonal scan path, distortion value and standard deviation rather to edge height of formed specimen is very low, and the edge height despite of decreasing length of scan path increases significantly compared to the circular scan path. As a result, four-sequence hexagonal scan pattern is proposed as the optimized perimeter scan path to produce bowl-shaped product.

  5. Comparison of dimensional accuracy of digital dental models produced from scanned impressions and scanned stone casts

    Science.gov (United States)

    Subeihi, Haitham

    Introduction: Digital models of dental arches play a more and more important role in dentistry. A digital dental model can be generated by directly scanning intraoral structures, by scanning a conventional impression of oral structures or by scanning a stone cast poured from the conventional impression. An accurate digital scan model is a fundamental part for the fabrication of dental restorations. Aims: 1. To compare the dimensional accuracy of digital dental models produced by scanning of impressions versus scanning of stone casts. 2. To compare the dimensional accuracy of digital dental models produced by scanning of impressions made of three different materials (polyvinyl siloxane, polyether or vinyl polyether silicone). Methods and Materials: This laboratory study included taking addition silicone, polyether and vinyl polyether silicone impressions from an epoxy reference model that was created from an original typodont. Teeth number 28 and 30 on the typodont with a missing tooth number 29 were prepared for a metal-ceramic three-unit fixed dental prosthesis with tooth #29 being a pontic. After tooth preparation, an epoxy resin reference model was fabricated by duplicating the typodont quadrant that included the tooth preparations. From this reference model 12 polyvinyl siloxane impressions, 12 polyether impressions and 12 vinyl polyether silicone impressions were made. All 36 impressions were scanned before pouring them with dental stone. The 36 dental stone casts were, in turn, scanned to produce digital models. A reference digital model was made by scanning the reference model. Six groups of digital models were produced. Three groups were made by scanning of the impressions obtained with the three different materials, the other three groups involved the scanning of the dental casts that resulted from pouring the impressions made with the three different materials. Groups of digital models were compared using Root Mean Squares (RMS) in terms of their

  6. Optical advantages in retinal scanning displays

    Science.gov (United States)

    Urey, Hakan

    2000-06-01

    Virtual Retinal DisplayTM technology is a retinal scanning display (RSD) technology being developed at Microvision, Inc., for a variety of applications including microdisplays. An RSD scans a modulated light beam onto a viewer's retina to produce a perceived image. Red, green and blue light sources, such as lasers, laser diodes or LEDs combine with Microvision's proprietary miniaturized scanner designs to make the RSD very well suited for head-worn and helmet-mounted displays (HMD). This paper compares the features of RSD technology to other display technologies such as the cathode ray tubes or matrix-based displays for HMD and other wearable display applications, and notes important performance advantages due to the number of pixel- generating elements. Also discussed are some fundamental optical limitations for virtual displays used in the HMD applications.

  7. Laser scanning laser diode photoacoustic microscopy system.

    Science.gov (United States)

    Erfanzadeh, Mohsen; Kumavor, Patrick D; Zhu, Quing

    2018-03-01

    The development of low-cost and fast photoacoustic microscopy systems enhances the clinical applicability of photoacoustic imaging systems. To this end, we present a laser scanning laser diode-based photoacoustic microscopy system. In this system, a 905 nm, 325 W maximum output peak power pulsed laser diode with 50 ns pulsewidth is utilized as the light source. A combination of aspheric and cylindrical lenses is used for collimation of the laser diode beam. Two galvanometer scanning mirrors steer the beam across a focusing aspheric lens. The lateral resolution of the system was measured to be ∼21 μm using edge spread function estimation. No averaging was performed during data acquisition. The imaging speed is ∼370 A-lines per second. Photoacoustic microscopy images of human hairs, ex vivo mouse ear, and ex vivo porcine ovary are presented to demonstrate the feasibility and potentials of the proposed system.

  8. Development of Scanning Ultrafast Electron Microscope Capability.

    Energy Technology Data Exchange (ETDEWEB)

    Collins, Kimberlee Chiyoko [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Talin, Albert Alec [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Chandler, David W. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Michael, Joseph R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-11-01

    Modern semiconductor devices rely on the transport of minority charge carriers. Direct examination of minority carrier lifetimes in real devices with nanometer-scale features requires a measurement method with simultaneously high spatial and temporal resolutions. Achieving nanometer spatial resolutions at sub-nanosecond temporal resolution is possible with pump-probe methods that utilize electrons as probes. Recently, a stroboscopic scanning electron microscope was developed at Caltech, and used to study carrier transport across a Si p-n junction [ 1 , 2 , 3 ] . In this report, we detail our development of a prototype scanning ultrafast electron microscope system at Sandia National Laboratories based on the original Caltech design. This effort represents Sandia's first exploration into ultrafast electron microscopy.

  9. Soft stylus probes for scanning electrochemical microscopy.

    Science.gov (United States)

    Cortés-Salazar, Fernando; Träuble, Markus; Li, Fei; Busnel, Jean-Marc; Gassner, Anne-Laure; Hojeij, Mohamad; Wittstock, Gunther; Girault, Hubert H

    2009-08-15

    A soft stylus microelectrode probe has been developed to carry out scanning electrochemical microscopy (SECM) of rough, tilted, and large substrates in contact mode. It is fabricated by first ablating a microchannel in a polyethylene terephthalate thin film and filling it with a conductive carbon ink. After curing the carbon track and lamination with a polymer film, the V-shaped stylus was cut thereby forming a probe, with the cross section of the carbon track at the tip being exposed either by UV-photoablation machining or by blade cutting followed by polishing to produce a crescent moon-shaped carbon microelectrode. The probe properties have been assessed by cyclic voltammetry, approach curves, and line scans over electrochemically active and inactive substrates of different roughness. The influence of probe bending on contact mode imaging was then characterized using simple patterns. Boundary element method simulations were employed to rationalize the distance-dependent electrochemical response of the soft stylus probes.

  10. Automatic scanning of NTA film neutron dosimeters

    CERN Document Server

    Müller, R

    1999-01-01

    At the European Laboratory for Particle Physics CERN, personal neutron monitoring for over 4000 collaborators is performed with Kodak NTA film, one of the few suitable dosemeters in the stray radiation environment of a high energy accelerator. After development, films are scanned with a projection microscope. To overcome this lengthy and strenuous procedure an automated analysis system for the dosemeters has been developed. General purpose image recognition software, tailored to the specific needs with a macro language, analyses the digitised microscope image. This paper reports on the successful automatic scanning of NTA films irradiated with neutrons from a /sup 238/Pu-Be source (E approximately=4 MeV), as well as on the extension of the method to neutrons of higher energies. The question of detection limits is discussed in the light of an application of the method in routine personal neutron monitoring. (9 refs).

  11. Measuring Spatial Vibration Using Continuous Laser Scanning

    Directory of Open Access Journals (Sweden)

    Izhak Bucher

    2000-01-01

    Full Text Available This paper presents a method, which allows one to use a single point laser vibrometer as a continuous sensor measuring along a line or a 2D surface. The mathematical background of the curve-fitting procedure and the necessary signal processing allowing one to extract the amplitude of sinusoidal vibration are discussed. In the current work, use has been made with an ordinary laser interferometer equipped with glavanometer-based x, y mirros. This system is not designed for continuous scanning therefore some effort needs to be spent in order to overcome the dynamical characteristics of this system. The potential of such an instrument, as demonstrated in this work, may encourage the development of mechanically better scanning devices.

  12. Aberration corrected Lorentz scanning transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    McVitie, S., E-mail: stephen.mcvitie@glasgow.ac.uk; McGrouther, D.; McFadzean, S.; MacLaren, D.A.; O’Shea, K.J.; Benitez, M.J.

    2015-05-15

    We present results from an aberration corrected scanning transmission electron microscope which has been customised for high resolution quantitative Lorentz microscopy with the sample located in a magnetic field free or low field environment. We discuss the innovations in microscope instrumentation and additional hardware that underpin the imaging improvements in resolution and detection with a focus on developments in differential phase contrast microscopy. Examples from materials possessing nanometre scale variations in magnetisation illustrate the potential for aberration corrected Lorentz imaging as a tool to further our understanding of magnetism on this lengthscale. - Highlights: • Demonstration of nanometre scale resolution in magnetic field free environment using aberration correction in the scanning transmission electron microscope (STEM). • Implementation of differential phase contrast mode of Lorentz microscopy in aberration corrected STEM with improved sensitivity. • Quantitative imaging of magnetic induction of nanostructures in amorphous and cross-section samples.

  13. Quantitative bone scanning after asymptomatic Charnley arthroplasty

    Energy Technology Data Exchange (ETDEWEB)

    Mullaji, A.B. (University Department of Orthopedic and Accident Surgery, Royal Liverpool University Hospital, Lierpool (United Kingdom)); Tood, R.C. (Department of Orthopedics, Black Notley Hospital, Braintree (United Kingdom)); Robinson, S. (Department of MedicaL Physics, Colchester General Hospital, Colchester (United Kingdom)); Critchley, M. (Department of Nuclear Medicine, Royal Liverpool University Hospital, Liverpool (United Kingdom))

    1994-06-01

    To establish the normal pattern of postoperative tracer uptake we performed 73 [sup 99m]technetium methylene disphosphonate scans following primary Charnley hip replacements for arthrosis in 68 patients without clinical, hematological and radiographic complications. The patients were divided into 7 subgroups according to the period, 6-24 months, between surgery and scan. There were 10-12 patients in each subgroup. A high-resolution gamma camera with a large filed of view was used. Ratios of uptake in each of 10 peri-prosthetic zones to normal bone were calculated. Femoral uptake was found to decrease in linear fashion from 6 to 12 months after surgery. Thereafter the uptake remained unaltered at levels nearly twice the normal ones in the greater trochanter and nearly 1.5 times in the lesser trochanter, returning to almost normal levels in other zones. Acetabular uptake remained elevated throughout. (au) (20 refs.).

  14. Solving LR Conflicts Through Context Aware Scanning

    Science.gov (United States)

    Leon, C. Rodriguez; Forte, L. Garcia

    2011-09-01

    This paper presents a new algorithm to compute the exact list of tokens expected by any LR syntax analyzer at any point of the scanning process. The lexer can, at any time, compute the exact list of valid tokens to return only tokens in this set. In the case than more than one matching token is in the valid set, the lexer can resort to a nested LR parser to disambiguate. Allowing nested LR parsing requires some slight modifications when building the LR parsing tables. We also show how LR parsers can parse conflictive and inherently ambiguous languages using a combination of nested parsing and context aware scanning. These expanded lexical analyzers can be generated from high level specifications.

  15. Anthropometric data collection of Portuguese children using 3D body scanning: considerations about the scanning booth

    Science.gov (United States)

    de Campos, R.; Carvalho, M. A.; Lopes, H. P.; Xu, B.

    2017-10-01

    This paper presents some considerations regarding the scanning booth used in an anthropometric study done with a 3D body scanning technology. The data collected is part of a Ph.D. study conducted in Textile Engineering at University of Minho in Portugal, which aims to develop clothing for overweight and obese Portuguese children aged 2-11 years, of both genders. The challenges faced during data collection are described, and modifications of the scanning booth are proposed. It is possible to conclude that the importance of the scanning booth is key to an efficient anthropometric data collection, including the growth of this technology in the garment industry, Universities Research Institutes involved with anthropometric studies.

  16. Scanning gate imaging in confined geometries

    OpenAIRE

    Steinacher, R.; Kozikov, A. A.; Rössler, C.; Reichl, C.; Wegscheider, W.; Ensslin, K.; Ihn, T.

    2016-01-01

    This article reports on tunable electron backscattering investigated with the biased tip of a scanning force microscope. Using a channel defined by a pair of Schottky gates, the branched electron flow of ballistic electrons injected from a quantum point contact is guided by potentials of a tunable height well below the Fermi energy. The transition from injection into an open two-dimensional electron gas to a strongly confined channel exhibits three experimentally distinct regimes: one in whic...

  17. Fetal nuchal translucency scan in Nigeria

    OpenAIRE

    Oloyede, Olufemi Adebari; Abbey, Mkpe; Oloyede, Adeniyi Adebowale; Nwachukwu, Onyinye

    2014-01-01

    Introduction To evaluate the performance of first trimester nuchal translucency scan screening among pregnant women in Nigeria. Methods A prospective observational and questionnaire based study involving 510 pregnant women between 11+0 and 13+6 weeks. Routine counselling and nuchal translucency measurement was conducted using the FMF, London guidelines. Chorionic villous sampling was done at NT ? 2.5 mm or ? 95th centile. Results Five hundred and ten out of 542 (94.1%) were analysed, mainly r...

  18. High-speed scanning: an improved algorithm

    Science.gov (United States)

    Nachimuthu, A.; Hoang, Khoi

    1995-10-01

    In using machine vision for assessing an object's surface quality, many images are required to be processed in order to separate the good areas from the defective ones. Examples can be found in the leather hide grading process; in the inspection of garments/canvas on the production line; in the nesting of irregular shapes into a given surface... . The most common method of subtracting the total area from the sum of defective areas does not give an acceptable indication of how much of the `good' area can be used, particularly if the findings are to be used for the nesting of irregular shapes. This paper presents an image scanning technique which enables the estimation of useable areas within an inspected surface in terms of the user's definition, not the supplier's claims. That is, how much useable area the user can use, not the total good area as the supplier estimated. An important application of the developed technique is in the leather industry where the tanner (the supplier) and the footwear manufacturer (the user) are constantly locked in argument due to disputed quality standards of finished leather hide, which disrupts production schedules and wasted costs in re-grading, re- sorting... . The developed basic algorithm for area scanning of a digital image will be presented. The implementation of an improved scanning algorithm will be discussed in detail. The improved features include Boolean OR operations and many other innovative functions which aim at optimizing the scanning process in terms of computing time and the accurate estimation of useable areas.

  19. Abnormal bone scan : Importance of clinical correlation

    Directory of Open Access Journals (Sweden)

    Dharm Raj Singh

    2002-01-01

    Full Text Available A case of renal cell carcinoma which was diagnosed to have metastatic disease on the basis of two hot spots in ribs on bone scan, is presented. After careful and thor-ough history, it turned out to be fracture ribs which oc-curred due to bad positioning during radical nephrectoiny. This case highlights the importance of clinical judgement especially in the modern era of sophisticated investiga-tions.

  20. Scanning electron microscopic observations on bone.

    Science.gov (United States)

    Anderson, C; Danylchuk, K D

    1977-01-01

    The maceration technique employed in the preparation of specimens of bone for museum purposes has also been found to be of use in the preparation of fresh specimens for study with the scanning electron microscope. The technique requires less technical supervision, permits a greater underprocessing to overprocessing margin, and allows comparability of recent biopsy material with previously macerated bone specimens with no less detail than that found by other authors using other techniques on biopsy material.

  1. Scanning electron microscopy of superficial white onychomycosis*

    Science.gov (United States)

    de Almeida Jr., Hiram Larangeira; Boabaid, Roberta Oliveira; Timm, Vitor; Silva, Ricardo Marques e; de Castro, Luis Antonio Suita

    2015-01-01

    Superficial white onychomycosis is characterized by opaque, friable, whitish superficial spots on the nail plate. We examined an affected halux nail of a 20-year-old male patient with scanning electron microscopy. The mycological examination isolated Trichophyton mentagrophytes. Abundant hyphae with the formation of arthrospores were found on the nail's surface, forming small fungal colonies. These findings showed the great capacity for dissemination of this form of onychomycosis. PMID:26560225

  2. Scanning electron microscopy of molluscum contagiosum*

    OpenAIRE

    Almeida Jr,Hiram Larangeira de; Abuchaim,Martha Oliveira; Schneide, Maiko Abel; Marques, Leandra; Castro, Luis Antônio Suíta de

    2013-01-01

    Molluscum contagiosum is a disease caused by a poxvirus. It is more prevalent in children up to 5 years of age. There is a second peak of incidence in young adults. In order to examine its ultrastructure, three lesions were curetted without disruption, cut transversely with a scalpel, and routinely processed for scanning electron microscopy (SEM). The oval structure of molluscum contagiosum could be easily identified. In its core, there was a central umbilication and just below this depressio...

  3. SCANNING SPEED INFLUENCE ON THE PHYSICAL PROPERTIES ...

    African Journals Online (AJOL)

    The most commonly used aerospace titanium alloy, Ti6Al4V, was deposited on Ti6Al4V plate of dimension 72 x 72 x5mm. The laser power of 3 kW, powder flow rate of 1.44 g/min and gas flow rate of 4 l/min were used throughout the deposition process. The transverse/ scanning speed was varied between 0.005 to 0.095 ...

  4. Scanning electron microscopy of cold gases

    Science.gov (United States)

    Santra, Bodhaditya; Ott, Herwig

    2015-06-01

    Ultracold quantum gases offer unique possibilities to study interacting many-body quantum systems. Probing and manipulating such systems with ever increasing degree of control requires novel experimental techniques. Scanning electron microscopy is a high resolution technique which can be used for in situ imaging, single site addressing in optical lattices and precision density engineering. Here, we review recent advances and achievements obtained with this technique and discuss future perspectives.

  5. Angular Approach Scanning Ion Conductance Microscopy.

    Science.gov (United States)

    Shevchuk, Andrew; Tokar, Sergiy; Gopal, Sahana; Sanchez-Alonso, Jose L; Tarasov, Andrei I; Vélez-Ortega, A Catalina; Chiappini, Ciro; Rorsman, Patrik; Stevens, Molly M; Gorelik, Julia; Frolenkov, Gregory I; Klenerman, David; Korchev, Yuri E

    2016-05-24

    Scanning ion conductance microscopy (SICM) is a super-resolution live imaging technique that uses a glass nanopipette as an imaging probe to produce three-dimensional (3D) images of cell surface. SICM can be used to analyze cell morphology at nanoscale, follow membrane dynamics, precisely position an imaging nanopipette close to a structure of interest, and use it to obtain ion channel recordings or locally apply stimuli or drugs. Practical implementations of these SICM advantages, however, are often complicated due to the limitations of currently available SICM systems that inherited their design from other scanning probe microscopes in which the scan assembly is placed right above the specimen. Such arrangement makes the setting of optimal illumination necessary for phase contrast or the use of high magnification upright optics difficult. Here, we describe the designs that allow mounting SICM scan head on a standard patch-clamp micromanipulator and imaging the sample at an adjustable approach angle. This angle could be as shallow as the approach angle of a patch-clamp pipette between a water immersion objective and the specimen. Using this angular approach SICM, we obtained topographical images of cells grown on nontransparent nanoneedle arrays, of islets of Langerhans, and of hippocampal neurons under upright optical microscope. We also imaged previously inaccessible areas of cells such as the side surfaces of the hair cell stereocilia and the intercalated disks of isolated cardiac myocytes, and performed targeted patch-clamp recordings from the latter. Thus, our new, to our knowledge, angular approach SICM allows imaging of living cells on nontransparent substrates and a seamless integration with most patch-clamp setups on either inverted or upright microscopes, which would facilitate research in cell biophysics and physiology. Copyright © 2016 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  6. Circular zig-zag scan video format

    Science.gov (United States)

    Peterson, C. Glen; Simmons, Charles M.

    1992-01-01

    A circular, ziz-zag scan for use with vidicon tubes. A sine wave is generated, rectified and its fourth root extracted. The fourth root, and its inverse, are used to generate horizontal ramp and sync signals. The fourth root is also used to generate a vertical sync signal, and the vertical sync signal, along with the horizontal sync signal, are used to generate the vertical ramp signal. Cathode blanking and preamplifier clamp signals are also obtained from the vertical sync signal.

  7. Scanning Technique In Developing Students Reading Comprehension

    OpenAIRE

    Thamrin, Nur Sehang

    2012-01-01

    One of the objectives of teaching English for university students is the students are expected to understand the reading text. However, it is very difficult for the students to catch the message from the reading text as they have limited words and reading strategies. This research was intended to solve the students' problem relating to the reading comprehension. The aim of this research is to prove whether the implementation of scanning technique is effective to develop students' reading comp...

  8. Scanning Tunneling Spectroscopy of Graphene on Graphite

    OpenAIRE

    Li, Guohong; Luican, Adina; Andrei, Eva Y.

    2008-01-01

    We report low temperature high magnetic field scanning tunneling microscopy and spectroscopy of graphene flakes on graphite that exhibit the structural and electronic properties of graphene decoupled from the substrate. Pronounced peaks in the tunneling spectra develop with field revealing a Landau level sequence that provides a direct way to identify graphene and to determine the degree of its coupling to the substrate. The Fermi velocity and quasiparticle lifetime, obtained from the positio...

  9. Contextual Analysis of CT Scanned Pig Carcasses

    DEFF Research Database (Denmark)

    Lyckegaard, Allan; Larsen, Rasmus; Christensen, Lars Bager

    2006-01-01

    Knowledge of the weight of tissue types in pig carcasses is generally only available after manual dissection. The use of computed tomography (CT) has demonstrated to be a promising approach to gain knowledge on the lean meat weight (Romvari, 2005), but less effort has been put into gaining...... not consider the spatial context in CT scan. Applying contextual methods from the field of image analysis we hope to make a virtual dissection of pig carcasses....

  10. Designs for Environmental Scanning Systems: Tests of a Contingency Theory

    OpenAIRE

    Masoud Yasai-Ardekani; Paul C. Nystrom

    1996-01-01

    This study compared the relationships between organizational context and the designs of environmental scanning systems for organizational with effective and ineffective scanning systems. The study analyzed data from over 100 North American business organizations. Results indicate that organizations with effective scanning systems tend to align their scanning designs with the requirements of their context. On the other hand, the results show that organizations with ineffective scanning systems...

  11. Photometric Repeatability of Scanned Imagery: UVIS

    Science.gov (United States)

    Shanahan, Clare E.; McCullough, Peter; Baggett, Sylvia

    2017-08-01

    We provide the preliminary results of a study on the photometric repeatability of spatial scans of bright, isolated white dwarf stars with the UVIS channel of the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). We analyze straight-line scans from the first pair of identical orbits of HST program 14878 to assess if sub 0.1% repeatability can be attained with WFC3/UVIS. This study is motivated by the desire to achieve better signal-to-noise in the UVIS contamination and stability monitor, in which observations of standard stars in staring mode have been taken from the installation of WFC3 in 2009 to the present to assess temporal photometric stability. Higher signal to noise in this program would greatly benefit the sensitivity to detect contamination, and to better characterize the observed small throughput drifts over time. We find excellent repeatability between identical visits of program 14878, with sub 0.1% repeatability achieved in most filters. These! results support the initiative to transition the staring mode UVIS contamination and photometric stability monitor from staring mode images to spatial scans.

  12. Sagebrush Biomass Estimation Using Terrestrial Laser Scanning

    Science.gov (United States)

    Olsoy, P.; Glenn, N. F.; Clark, P. E.; Spaete, L.; Mitchell, J.; Shrestha, R.

    2012-12-01

    LiDAR (Light Detection and Ranging) is a proven tool for inventory of many vegetation types. Airborne laser scanning (ALS) has been demonstrated for estimation of biomass of trees, but the relatively low number of laser points (1-10 m-2) typical of ALS datasets makes estimating biomass of shrubs and small stature vegetation challenging. This study uses terrestrial laser scanning (TLS) to estimate sagebrush biomass (Artemisia tridentata subsp. wyomingensis) by relating destructively sampled estimates to TLS-derived volumetric estimates. At close range, TLS can commonly provide in excess of 100,000 3-D points for a single sagebrush of approximately 1 m3 in volume. In this study, thirty sagebrush were scanned and destructively sampled at 6 sites within Reynolds Creek Experimental Watershed in southwestern Idaho, USA. The 3-D point cloud data are converted into 1-cm voxels to give quantitative estimates of shrub volume. The accuracy of the TLS-based metrics for estimating biomass are then compared to several traditional plot sampling methods including point-intercept and simple crown dimension measurements. The findings of this study are expected to provide guidance on methods for data collection and analysis such that biomass can be accurately estimated across plot-scales (e.g., 100 m x 100 m).

  13. Shyness and face scanning in children.

    Science.gov (United States)

    Brunet, Paul M; Heisz, Jennifer J; Mondloch, Catherine J; Shore, David I; Schmidt, Louis A

    2009-10-01

    Contrary to popular beliefs, a recent empirical study using eye tracking has shown that a non-clinical sample of socially anxious adults did not avoid the eyes during face scanning. Using eye-tracking measures, we sought to extend these findings by examining the relation between stable shyness and face scanning patterns in a non-clinical sample of 11-year-old children. We found that shyness was associated with longer dwell time to the eye region than the mouth, suggesting that some shy children were not avoiding the eyes. Shyness was also correlated with fewer first fixations to the nose, which is thought to reflect the typical global strategy of face processing. Present results replicate and extend recent work on social anxiety and face scanning in adults to shyness in children. These preliminary findings also provide support for the notion that some shy children may be hypersensitive to detecting social cues and intentions in others conveyed by the eyes. Theoretical and practical implications for understanding the social cognitive correlates and treatment of shyness are discussed.

  14. Chemical Phenomena of Atomic Force Microscopy Scanning.

    Science.gov (United States)

    Ievlev, Anton V; Brown, Chance; Burch, Matthew J; Agar, Joshua C; Velarde, Gabriel A; Martin, Lane W; Maksymovych, Petro; Kalinin, Sergei V; Ovchinnikova, Olga S

    2018-02-12

    Atomic force microscopy is widely used for nanoscale characterization of materials by scientists worldwide. The long-held belief of ambient AFM is that the tip is generally chemically inert but can be functionalized with respect to the studied sample. This implies that basic imaging and scanning procedures do not affect surface and bulk chemistry of the studied sample. However, an in-depth study of the confined chemical processes taking place at the tip-surface junction and the associated chemical changes to the material surface have been missing as of now. Here, we used a hybrid system that combines time-of-flight secondary ion mass spectrometry with an atomic force microscopy to investigate the chemical interactions that take place at the tip-surface junction. Investigations showed that even basic contact mode AFM scanning is able to modify the surface of the studied sample. In particular, we found that the silicone oils deposited from the AFM tip into the scanned regions and spread to distances exceeding 15 μm from the tip. These oils were determined to come from standard gel boxes used for the storage of the tips. The explored phenomena are important for interpreting and understanding results of AFM mechanical and electrical studies relying on the state of the tip-surface junction.

  15. RubiShort: Reducing scan time in 82Rb heart scans to minimize movements artifacts

    DEFF Research Database (Denmark)

    Madsen, Jeppe; Vraa, Kaspar J.; Harms, Hans

    Aim: Relative and absolute myocardial blood flow (MBF) can derived from a single 82Rb PET/CT scan using list mode data to extract both static and dynamic PET series. However, patient movement and changes in breathing pattern, especially during pharmacological stress, reduce the quality of the scans...... and are known to introduce artifacts in 10-15% of all scans. By reducing scan time from 7 min. to 5 min, we expect to reduce the frequency of motion artifacts. This is, however, at the cost of information used for MBF calculation and count statistics in the relative blood flow images. We set out to examine...... if a reduction of scan time would affect the accuracy of the examination. Method: Both stress and rest 82Rb scans from 11 random clinical patients without motion artifacts were selected. Using list mode data, dynamic series from 0-7 min (standard) and 0-5 min (short) after 82Rb infusion as well as static series...

  16. Improving diagnosis of appendicitis. Early autologous leukocyte scanning.

    Science.gov (United States)

    DeLaney, A R; Raviola, C A; Weber, P N; McDonald, P T; Navarro, D A; Jasko, I

    1989-10-01

    A prospective nonrandomized study investigating the accuracy and utility of autologous leukocyte scanning in the diagnosis of apendicitis was performed. One hundred patients in whom the clinical diagnosis of appendicitis was uncertain underwent indium 111 oxyquinoline labelling of autologous leukocytes and underwent scanning 2 hours following reinjection. Of 32 patients with proved appendicitis, three scans revealed normal results (false-negative rate, 0.09). Of 68 patients without appendicitis, three scans had positive results (false-positive rate, 0.03; sensitivity, 0.91; specificity, 0.97; predictive value of positive scan, 0.94; predictive value of negative scan, 0.96; and overall accuracy, 0.95). Scan results altered clinical decisions in 19 patients. In 13 cases, the scan produced images consistent with diagnoses other than appendicitis, expediting appropriate management. Early-imaging111 In oxyquinoline autologous leukocyte scanning is a practical and highly accurate adjunct for diagnosing appendicitis.

  17. A concise methodology for the estimation of elemental concentration effects on mesoscale cohesion of non-ferrous covalent glasses: The case of Se(80−xGe(20−xInx=0,5,10,15

    Directory of Open Access Journals (Sweden)

    Georgios S.E. Antipas

    2015-09-01

    Full Text Available The link between the electronic state and the mesoscale of covalent glasses is not settled. A functional means of addressing the mesoscale is via generalizing glass properties (e.g. such as cohesion on the basis of atomic clusters. Derivation of the most representative such cluster formations is not streamlined, however. Here, numerical pair correlation and ab initio energetic datasets are presented for the case of amorphous Selenium-rich covalent glasses, which were obtained via a new, concise methodology, relating mesoscopic cohesion to local atomic order and to the system׳s electronic structure. The methodology consisted of selecting clusters on the basis of the variation of atomic environment statistics of total coordination, partial coordination by the matrix element and cluster number density along the radial direction of a Reverse Monte Carlo supercell, the latter attained by fitting total scattering data.

  18. Aligned ion implementation using scanning probes

    Energy Technology Data Exchange (ETDEWEB)

    Persaud, A.

    2006-12-12

    A new technique for precision ion implantation has been developed. A scanning probe has been equipped with a small aperture and incorporated into an ion beamline, so that ions can be implanted through the aperture into a sample. By using a scanning probe the target can be imaged in a non-destructive way prior to implantation and the probe together with the aperture can be placed at the desired location with nanometer precision. In this work first results of a scanning probe integrated into an ion beamline are presented. A placement resolution of about 120 nm is reported. The final placement accuracy is determined by the size of the aperture hole and by the straggle of the implanted ion inside the target material. The limits of this technology are expected to be set by the latter, which is of the order of 10 nm for low energy ions. This research has been carried out in the context of a larger program concerned with the development of quantum computer test structures. For that the placement accuracy needs to be increased and a detector for single ion detection has to be integrated into the setup. Both issues are discussed in this thesis. To achieve single ion detection highly charged ions are used for the implantation, as in addition to their kinetic energy they also deposit their potential energy in the target material, therefore making detection easier. A special ion source for producing these highly charged ions was used and their creation and interactions with solids of are discussed in detail. (orig.)

  19. Spin scan tomographic array-based imager.

    Science.gov (United States)

    Hovland, Harald

    2014-12-29

    This work presents a novel imaging device based on tomographic reconstruction. Similar in certain aspects to the earlier presented tomographic scanning (TOSCA) principle, it provides several important enhancements. The device described generates a stream of one-dimensional projections from a linear array of thin stripe detectors onto which the (circular) image of the scene is rotated. A two-dimensional image is then reproduced from the one-dimensional signals using tomographic processing techniques. A demonstrator is presented. Various aspects of the design and construction are discussed, and resulting images and movies are presented.

  20. ScanLab - Restauro e ricostruzione digitale

    Directory of Open Access Journals (Sweden)

    ScanLab ScanLab

    2014-09-01

    Full Text Available Inside the new reality of Scanlab, in the city of Palermo, specialized in innovative sectors like 3D printing and rapid prototyping, ScanArt is born, a macro project entirely dedicated to the study and safeguard of cultural heritage. Using new technologies of tridimensional remarking and augmented reality applications, the group is able to offer tecnological services aimed at improving the common instruments bound to the to the world of arts and at the fruition and divulgation of it.

  1. Phase retrieval based on pupil scanning modulation

    Science.gov (United States)

    Dou, Jiantai; Gao, Zhishan; Ma, Jun; Yuan, Caojin; Yang, Zhongming; Claus, Daniel; Zhang, Tianyu

    2017-08-01

    The pupil scanning modulation is a maneuverable method for retrieving the phase of the complex-valued object. It is based on changing the extent of the illumination function using an adaptive aperture. The apertures are fixed on the same border or point of intersection that ensures the location of the aperture. We sequentially increase the size of the aperture and guarantee the necessary overlap between adjacent object fields. An improved algorithm including the adaptive raised-power estimation constraint and gradient-descent step is proposed to accelerate convergence and avoid stagnation during iterations. Both the simulation and experiment have been conducted to verify the feasibility of this method.

  2. Trend scanning, scouting and foresight techniques

    DEFF Research Database (Denmark)

    Rohrbeck, René

    2013-01-01

    innovations, managing risk, and exploring new markets. The author identifies five challenges that companies may face when developing corporate foresight, which include the detection of signals that yield a competitive advantage, the detection of change when terminology is unclear, and the selection...... of an appropriate foresight method as well as the successful use of foresight methods in the highly iterative front end of innovation. Monitoring and scanning are two ways of conducting the search, with intelligent data mining and scouting networks as possible approaches. Foresight methods can be divided...

  3. Circular zig-zag scan video format

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, C.G.; Simmons, C.M.

    1992-06-09

    A circular, ziz-zag scan for use with vidicon tubes is disclosed. A sine wave is generated, rectified and its fourth root extracted. The fourth root, and its inverse, are used to generate horizontal ramp and sync signals. The fourth root is also used to generate a vertical sync signal, and the vertical sync signal, along with the horizontal sync signal, are used to generate the vertical ramp signal. Cathode blanking and preamplifier clamp signals are also obtained from the vertical sync signal. 10 figs.

  4. A video rate laser scanning confocal microscope

    Science.gov (United States)

    Ma, Hongzhou; Jiang, James; Ren, Hongwu; Cable, Alex E.

    2008-02-01

    A video-rate laser scanning microscope was developed as an imaging engine to integrate with other photonic building blocks to fulfill various microscopic imaging applications. The system is quipped with diode laser source, resonant scanner, galvo scanner, control electronic and computer loaded with data acquisition boards and imaging software. Based on an open frame design, the system can be combined with varies optics to perform the functions of fluorescence confocal microscopy, multi-photon microscopy and backscattering confocal microscopy. Mounted to the camera port, it allows a traditional microscope to obtain confocal images at video rate. In this paper, we will describe the design principle and demonstrate examples of applications.

  5. Circular zig-zag scan video format

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, C.G.; Simmons, C.M.

    1991-03-21

    This invention is comprised of a circular, zig-zag scan for use with vidicon tubes. A sine wave is generated, rectified and its fourth root extracted. The fourth root, and its inverse, are used to generate horizontal ramp and sync signals. The fourth root is also used to generate a vertical sync signal, and the vertical sync signal, along with the horizontal sync signal, are used to generate the vertical ramp signal. Cathode blanking and preamplifier clamp signals are also obtained from the vertical sync signal.

  6. Frequency scanning interferometry for CLIC component fiducialisation

    CERN Document Server

    Kamugasa, Solomon William; Mainaud Durand, Helene; CERN. Geneva. ATS Department

    2016-01-01

    We present a strategy for the fiducialisation of CLIC’s Main Beam Quadrupole (MBQ) magnets using Frequency Scanning Interferometry (FSI). We have developed complementary device for a commercial FSI system to enable coordinate determination via multilateration. Using spherical high index glass retroreflectors with a wide acceptance angle, we optimise the geometry of measurement stations with respect to fiducials -- thus improving the precision of coordinates. We demonstrate through simulations that the 10 μm uncertainty required in the vertical and lateral axes for the fiducialisation of the MBQ can be attained using FSI multilateration.

  7. CT scan of bacterial and aseptic meningitis

    Energy Technology Data Exchange (ETDEWEB)

    Takemoto, Kazumasa; Saiwai, Shigeo; Tamaoka, Koichi (Kobe Central Municipal Hospital (Japan))

    1983-01-01

    CT scans of the patients with aseptic and bacterial meningitis were reviewed and compared to previous reports. In aseptic meningitis, no abnormal CT findings were observed. In bacterial meningitis, CT findings were ventricular dilatation, subdural fluid collection, parenchymal low density, intracerebral hematoma and meningeal enhancement after contrast injection. Three patients among 48 suffered from status epileptics during the course of the illness. All of the 3 patients developed parenchymal inhomogeneous low density and progressive ventricular dilatation which did not improve after ventricular peritoneal shunt surgery. We believe that these changes are most likely due to hypoxic hypoxemia during epileptic seizure and meningitis itself seems to play a little role.

  8. Scanning tunneling spectroscopy of graphene on graphite.

    Science.gov (United States)

    Li, Guohong; Luican, Adina; Andrei, Eva Y

    2009-05-01

    We report low temperature high magnetic field scanning tunneling microscopy and spectroscopy of graphene flakes on graphite that exhibit the structural and electronic properties of graphene decoupled from the substrate. Pronounced peaks in the tunneling spectra develop with increasing field revealing a Landau level sequence that provides a direct way to identify graphene and to determine the degree of its coupling to the substrate. The Fermi velocity and quasiparticle lifetime, obtained from the positions and width of the peaks, provide access to the electron-phonon and electron-electron interactions.

  9. Cornea Optical Topographical Scan System (COTSS)

    Science.gov (United States)

    1986-01-01

    The Cornea Optical Topographical Scan System (COTSS) is an instrument designed for use by opthalmologist to aid in performing surgical procedures such as radial keratotomy and to provide quick accurate data to aid in prescribing contact lenses and eyeglasses. A breadboard of the system was built and demonstrated in June of 1984. Additional refinements to the breadboard are needed to meet systems requirements prior to proceeding with prototype development. The present status of the COTSS instrument is given and the areas in which system refinements are required, are defined.

  10. Maritime Laser Scanning as the Source for Spatial Data

    Directory of Open Access Journals (Sweden)

    Szulwic Jakub

    2015-12-01

    Full Text Available The rapid development of scanning technology, especially mobile scanning, gives the possibility to collect spatial data coming from maritime measurement platforms and autonomous manned or unmanned vehicles. Presented solution is derived from the mobile scanning. However we should keep in mind that the specificity of laser scanning at sea and processing collected data should be in the form acceptable in Geographical Information Systems, especially typical for the maritime needs. At the same time we should be aware that data coming from maritime mobile scanning constitutes a new approach to the describing of maritime environment and brings a new perspective that is completely different than air and terrestrial scanning.

  11. One-dimensional scatter grid for the SenoScan slot-scanning digital mammography system

    Science.gov (United States)

    Elbakri, Idris A.; shen, Sam; Bloomquist, Aili; Tesic, Mike M.; Mawdsley, Gordon; Yaffe, Martin

    2005-04-01

    The SenoScan full-field digital mammography scanner uses a scanning slot detector that is 10 mm wide and 220 mm long. The X-ray beam is collimated to just outside the area of the detector. One important advantage of slot scanning is its inherent scatter rejection. As previously reported, the SenoScan slot scatter rejection is better than that obtained using a 3.5:1 mammography grid, and somewhat worse than that with a 5:1 grid. Additional scatter reduction can potentially improve the contrast in images of thick breasts. We evaluate a custom-designed grid for the slot scanning system. The grid is one-dimensional, offering scatter rejection along the longitudinal axis of the detector. We evaluate the reduction in scatter fraction, grid absorption and changes in the signal-difference-to-noise ratio (SDNR). Based on phantom studies, our results show effective scatter reduction by the grid with minimal reduction of SDNR. Grid absorption and scatter elimination do not necessarily lead to an increase in patient dose, especially if there is a improvement in the number of digital values in the image that are within the useful dynamic range of the detector. A benefit of removing the scatter contribution is an improvement in system dynamic range, because electronic detector gain adjustments can compensate for the drop in the digital pixel values.

  12. Water-Immersible MEMS scanning mirror designed for wide-field fast-scanning photoacoustic microscopy

    Science.gov (United States)

    Yao, Junjie; Huang, Chih-Hsien; Martel, Catherine; Maslov, Konstantin I.; Wang, Lidai; Yang, Joon-Mo; Gao, Liang; Randolph, Gwendalyn; Zou, Jun; Wang, Lihong V.

    2013-03-01

    By offering images with high spatial resolution and unique optical absorption contrast, optical-resolution photoacoustic microscopy (OR-PAM) has gained increasing attention in biomedical research. Recent developments in OR-PAM have improved its imaging speed, but have sacrificed either the detection sensitivity or field of view or both. We have developed a wide-field fast-scanning OR-PAM by using a water-immersible MEMS scanning mirror (MEMS-ORPAM). Made of silicon with a gold coating, the MEMS mirror plate can reflect both optical and acoustic beams. Because it uses an electromagnetic driving force, the whole MEMS scanning system can be submerged in water. In MEMS-ORPAM, the optical and acoustic beams are confocally configured and simultaneously steered, which ensures uniform detection sensitivity. A B-scan imaging speed as high as 400 Hz can be achieved over a 3 mm scanning range. A diffraction-limited lateral resolution of 2.4 μm in water and a maximum imaging depth of 1.1 mm in soft tissue have been experimentally determined. Using the system, we imaged the flow dynamics of both red blood cells and carbon particles in a mouse ear in vivo. By using Evans blue dye as the contrast agent, we also imaged the flow dynamics of lymphatic vessels in a mouse tail in vivo. The results show that MEMS-OR-PAM could be a powerful tool for studying highly dynamic and time-sensitive biological phenomena.

  13. AlaScan: A Graphical User Interface for Alanine Scanning Free-Energy Calculations.

    Science.gov (United States)

    Ramadoss, Vijayaraj; Dehez, François; Chipot, Christophe

    2016-06-27

    Computation of the free-energy changes that underlie molecular recognition and association has gained significant importance due to its considerable potential in drug discovery. The massive increase of computational power in recent years substantiates the application of more accurate theoretical methods for the calculation of binding free energies. The impact of such advances is the application of parent approaches, like computational alanine scanning, to investigate in silico the effect of amino-acid replacement in protein-ligand and protein-protein complexes, or probe the thermostability of individual proteins. Because human effort represents a significant cost that precludes the routine use of this form of free-energy calculations, minimizing manual intervention constitutes a stringent prerequisite for any such systematic computation. With this objective in mind, we propose a new plug-in, referred to as AlaScan, developed within the popular visualization program VMD to automate the major steps in alanine-scanning calculations, employing free-energy perturbation as implemented in the widely used molecular dynamics code NAMD. The AlaScan plug-in can be utilized upstream, to prepare input files for selected alanine mutations. It can also be utilized downstream to perform the analysis of different alanine-scanning calculations and to report the free-energy estimates in a user-friendly graphical user interface, allowing favorable mutations to be identified at a glance. The plug-in also assists the end-user in assessing the reliability of the calculation through rapid visual inspection.

  14. Cathodoluminescence in the scanning transmission electron microscope

    Energy Technology Data Exchange (ETDEWEB)

    Kociak, M., E-mail: mathieu.kociak@u-psud.fr [Laboratoire de Physique des Solides, Université Paris-SudParis-Sud, CNRS-UMR 8502, Orsay 91405 (France); Zagonel, L.F. [“Gleb Wataghin” Institute of Physics University of Campinas - UNICAMP, 13083-859 Campinas, São Paulo (Brazil)

    2017-05-15

    Cathodoluminescence (CL) is a powerful tool for the investigation of optical properties of materials. In recent years, its combination with scanning transmission electron microscopy (STEM) has demonstrated great success in unveiling new physics in the field of plasmonics and quantum emitters. Most of these results were not imaginable even twenty years ago, due to conceptual and technical limitations. The purpose of this review is to present the recent advances that broke these limitations, and the new possibilities offered by the modern STEM-CL technique. We first introduce the different STEM-CL operating modes and the technical specificities in STEM-CL instrumentation. Two main classes of optical excitations, namely the coherent one (typically plasmons) and the incoherent one (typically light emission from quantum emitters) are investigated with STEM-CL. For these two main classes, we describe both the physics of light production under electron beam irradiation and the physical basis for interpreting STEM-CL experiments. We then compare STEM-CL with its better known sister techniques: scanning electron microscope CL, photoluminescence, and electron energy-loss spectroscopy. We finish by comprehensively reviewing recent STEM-CL applications. - Highlights: • Reviews the field of STEM-CL. • Introduces the technical requirements and challenges for STEM-CL. • Introduces the different types of excitations probed by STEM-CL. • Gives comprehensive overview of the last fifteenth years in the field.

  15. Reflective afocal broadband adaptive optics scanning ophthalmoscope

    Science.gov (United States)

    Dubra, Alfredo; Sulai, Yusufu

    2011-01-01

    A broadband adaptive optics scanning ophthalmoscope (BAOSO) consisting of four afocal telescopes, formed by pairs of off-axis spherical mirrors in a non-planar arrangement, is presented. The non-planar folding of the telescopes is used to simultaneously reduce pupil and image plane astigmatism. The former improves the adaptive optics performance by reducing the root-mean-square (RMS) of the wavefront and the beam wandering due to optical scanning. The latter provides diffraction limited performance over a 3 diopter (D) vergence range. This vergence range allows for the use of any broadband light source(s) in the 450-850 nm wavelength range to simultaneously image any combination of retinal layers. Imaging modalities that could benefit from such a large vergence range are optical coherence tomography (OCT), multi- and hyper-spectral imaging, single- and multi-photon fluorescence. The benefits of the non-planar telescopes in the BAOSO are illustrated by resolving the human foveal photoreceptor mosaic in reflectance using two different superluminescent diodes with 680 and 796 nm peak wavelengths, reaching the eye with a vergence of 0.76 D relative to each other. PMID:21698035

  16. Scan of the back of human eye

    Science.gov (United States)

    2003-01-01

    ProVision Technologies, a NASA commercial space center at Sternis Space Center in Mississippi, has developed a new hyperspectral imaging (HSI) system that is much smaller than the original large units used aboard remote sensing aircraft and satellites. The new apparatus is about the size of a breadbox. HSI may be useful to ophthalmologists to study and diagnose eye health, both on Earth and in space, by examining the back of the eye to determine oxygen and blood flow quickly and without any invasion. ProVision's hyperspectral imaging system can scan the human eye and produce a graph showing optical density or light absorption, which can then be compared to a graph from a normal eye. Scans of the macula, optic disk or optic nerve head, and blood vessels can be used to detect anomalies and identify diseases in this delicate and important organ. ProVision has already developed a relationship with the University of Alabama at Birmingham, but is still on the lookout for a commercial partner in this application.

  17. Global CKM Fits with the Scan Method

    CERN Document Server

    Eigen, Gerald; Hitlin, David G; Porter, Frank C

    2013-01-01

    We present results of a unitary triangle fit based on the scan method. This frequentist approach employs Gaussian uncertainties for experimental quantities, but makes no arbitrary assumptions about the distribution of theoretical errors. Instead, we perform a large number of fits, scanning over regions of plausible theory errors for each quantity, and retain those fits meeting a specific confidence level criterion, thereby constraining the $\\bar \\rho - \\bar \\eta $ plane using the standard input measurements (CKM matrix elements, $\\sin2 \\beta, B^0_{d,s}$ mixing, $\\epsilon_K$) as well as branching fraction and \\CP asymmetry measurements of B decays to $PP, PV, VV$, and $a_1 P$ final states to determine $\\alpha$, $D^{(*)}K^{(*)}$ modes to determine $\\gamma$, and $D^{(*)}\\pi$ and $D\\rho$ modes to determine $2\\beta +\\gamma$. We parameterize individual decay amplitudes in terms of color-allowed tree, color-suppressed tree, penguin, singlet penguin, electroweak penguin, as well as $W$-exchange and $W$-annihilation a...

  18. Laser scanning of experimental solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Plunkett, B.C.; Lasswell, P.G.

    1980-01-01

    An instrument is described which measures and displays the response of the solar cell to a precisely positioned spot of HeNe laser light. By scanning the spot across the cell surface, one can create a map of the spatial variation in response of the cell. This map allows one to isolate flaws in cell contact integrity, locate open top surface grid lines, and evaluate fundamental junction performance. The system is useful for identifying and locating changes in the cell as it progresses through various experiments (e.g. stability studies). The laser scanner system is designed to be flexible and can accommodate different types of solar cell materials and a wide range of spot and scan sizes. Several modes of operation of the equipment are described, and results from two photovoltaic materials (CdS/Cu/sub 2/S and Zn/sub 3/P/sub 2/) are presented which demonstrate the capabilities of the system. Finally some of the proposed future uses of the system are discussed. 6 refs.

  19. A Linear Magnetic Field Scan Driver.

    Science.gov (United States)

    Quine, Richard W; Czechowski, Tomasz; Eaton, Gareth R

    2009-02-01

    A linear magnetic field scan driver was developed to provide a rapidly scanning magnetic field for use in electron paramagnetic resonance (EPR) spectroscopy. The driver consists of two parts: a digitally synthesized ramp waveform generator and a power amplifier to drive the magnetic field coils. Additionally, the driver provides a trigger signal to a data collection digitizer that is synchronized to the ramp waveform. The driver can also drive an arbitrary current waveform supplied from an external source. The waveform generator is computer controlled through a serial data interface. Additional functions are controlled by the user from the driver front panel. The frequency and amplitude of the waveform are each separately controlled with 12-bit resolution (one part in 4,096). Several versions of the driver have been built with different frequency and amplitude ranges. Frequencies range from 500 to 20,000 Hz. Field sweep amplitudes range up to 80 G(pp). This article also gives a brief description of the field coils that are driven by the driver.

  20. Differential-Concentration Scanning Ion Conductance Microscopy.

    Science.gov (United States)

    Perry, David; Page, Ashley; Chen, Baoping; Frenguelli, Bruno G; Unwin, Patrick R

    2017-11-21

    Scanning ion conductance microscopy (SICM) is a nanopipette-based scanning probe microscopy technique that utilizes the ionic current flowing between an electrode inserted inside a nanopipette probe containing electrolyte solution and a second electrode placed in a bulk electrolyte bath, to provide information on a substrate of interest. For most applications to date, the composition and concentration of the electrolyte inside and outside the nanopipette is identical, but it is shown herein that it can be very beneficial to lift this restriction. In particular, an ionic concentration gradient at the end of the nanopipette, generates an ionic current with a greatly reduced electric field strength, with particular benefits for live cell imaging. This differential concentration mode of SICM (ΔC-SICM) also enhances surface charge measurements and provides a new way to carry out reaction mapping measurements at surfaces using the tip for simultaneous delivery and sensing of the reaction rate. Comprehensive finite element method (FEM) modeling has been undertaken to enhance understanding of SICM as an electrochemical cell and to enable the interpretation and optimization of experiments. It is shown that electroosmotic flow (EOF) has much more influence on the nanopipette response in the ΔC-SICM configuration compared to standard SICM modes. The general model presented advances previous treatments, and it provides a framework for quantitative SICM studies.

  1. Is scanning in probed order recall articulatory?

    Science.gov (United States)

    Farrell, Simon; Lelièvre, Anna

    2009-09-01

    We consider how theories of serial recall might apply to other short-term memory tasks involving recall of order. In particular, we consider the possibility that when participants are cued to recall an item at an arbitrary position in a sequence, they covertly serially recall the list up to the cued position. One question is whether such "scanning" is articulatory in nature. Two experiments are presented in which the syllabic length of words preceding and following target positions were manipulated, to test the prediction of an articulatory-based mechanism that time to recall an item at a particular position will depend on the number of preceding long words. Although latency was dependent on target position, no word length effects on latency were observed. Additionally, the effects of word length on accuracy replicate recent demonstrations in serial recall that recall accuracy is dependent on the word length of all list items, not just that of target items, in line with distinctiveness assumptions. It is concluded that if scanning does occur, it is not carried out by covert or overt articulation.

  2. Breast ultrasound scans – surgeons’ expectations

    Directory of Open Access Journals (Sweden)

    Piotr Bednarski

    2015-06-01

    Full Text Available Recent years have witnessed a dynamic development of mammary gland imaging techniques, particularly ultrasonography and magnetic resonance imaging. A challenge related to these studies is the increase in the precision of the anatomical assessment of breast, particularly for early detection of subclinical lesions, performance of ultrasound-guided biopsy procedures, and accurate preoperative location of pathological lesions so as to optimize the surgical treatment. Ultrasound imaging is a primary and baseline diagnostic procedure the patient with suspected pathological lesions within breast is referred to by the surgeon. Lesions visualized in ultrasound scans are classifi ed according to the BI-RADS US assessment categories. The successive categories (2 through 6 encompass individual pathological lesions, estimating the risk of malignancy and provide guidelines for further diagnostic and therapeutic management. This article described the important aspects of ultrasonographic imaging of focal lesions within the breasts as signifi cant from the standpoint of surgical treatment of patients falling within BI-RADS US categories 3, 4, 5, and 6. Attention is drawn to the importance of ultrasound scans in the assessment of axillary fossa lymph nodes before the decision regarding the surgical treatment.

  3. Multi-parameters scanning in HTI media

    KAUST Repository

    Masmoudi, Nabil

    2014-08-05

    Building credible anisotropy models is crucial in imaging. One way to estimate anisotropy parameters is to relate them analytically to traveltime, which is challenging in inhomogeneous media. Using perturbation theory, we develop traveltime approximations for transversely isotropic media with horizontal symmetry axis (HTI) as explicit functions of the anellipticity parameter η and the symmetry axis azimuth ϕ in inhomogeneous background media. Specifically, our expansion assumes an inhomogeneous elliptically anisotropic background medium, which may be obtained from well information and stacking velocity analysis in HTI media. This formulation has advantages on two fronts: on one hand, it alleviates the computational complexity associated with solving the HTI eikonal equation, and on the other hand, it provides a mechanism to scan for the best fitting parameters η and ϕ without the need for repetitive modeling of traveltimes, because the traveltime coefficients of the expansion are independent of the perturbed parameters η and ϕ. The accuracy of our expansion is further enhanced by the use of shanks transform. We show the effectiveness of our scheme with tests on a 3D model and we propose an approach for multi-parameters scanning in TI media.

  4. Side-Scan-Sonar Points for Hudson River, NY

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Side Scan Point Files. These points correspond to individual pings which produced hte side-scan-sonar backscatter imagery. Sonar data were collected November 6 to...

  5. Analyzing Protein Denaturation using Fast Differential Scanning Calorimetry

    NARCIS (Netherlands)

    Splinter, R.; Van Herwaarden, A.W.; Iervolino, E.; Vanden Poel, G.; Istrate, D.; Sarro, P.M.

    2012-01-01

    This paper investigates the possibility to measure protein denaturation with Fast Differential Scanning Calorimetry (FDSC). Cancer can be diagnosed by measuring protein denaturation in blood plasma using Differential Scanning Calorimetry (DSC). FDSC can reduce diagnosis time from hours to minutes,

  6. 4D computed tomography scans for conformal thoracic treatment planning: is a single scan sufficient to capture thoracic tumor motion?

    Science.gov (United States)

    Tseng, Yolanda D.; Wootton, Landon; Nyflot, Matthew; Apisarnthanarax, Smith; Rengan, Ramesh; Bloch, Charles; Sandison, George; St. James, Sara

    2018-01-01

    Four dimensional computed tomography (4DCT) scans are routinely used in radiation therapy to determine the internal treatment volume for targets that are moving (e.g. lung tumors). The use of these studies has allowed clinicians to create target volumes based upon the motion of the tumor during the imaging study. The purpose of this work is to determine if a target volume based on a single 4DCT scan at simulation is sufficient to capture thoracic motion. Phantom studies were performed to determine expected differences between volumes contoured on 4DCT scans and those on the evaluation CT scans (slow scans). Evaluation CT scans acquired during treatment of 11 patients were compared to the 4DCT scans used for treatment planning. The images were assessed to determine if the target remained within the target volume determined during the first 4DCT scan. A total of 55 slow scans were compared to the 11 planning 4DCT scans. Small differences were observed in phantom between the 4DCT volumes and the slow scan volumes, with a maximum of 2.9%, that can be attributed to minor differences in contouring and the ability of the 4DCT scan to adequately capture motion at the apex and base of the motion trajectory. Larger differences were observed in the patients studied, up to a maximum volume difference of 33.4%. These results demonstrate that a single 4DCT scan is not adequate to capture all thoracic motion throughout treatment.

  7. Scanning Probe Microscopy of Organic Solar Cells

    Science.gov (United States)

    Reid, Obadiah G.

    Nanostructured composites of organic semiconductors are a promising class of materials for the manufacture of low-cost solar cells. Understanding how the nanoscale morphology of these materials affects their efficiency as solar energy harvesters is crucial to their eventual potential for large-scale deployment for primary power generation. In this thesis we describe the use of optoelectronic scanning-probe based microscopy methods to study this efficiency-structure relationship with nanoscale resolution. In particular, our objective is to make spatially resolved measurements of each step in the power conversion process from photons to an electric current, including charge generation, transport, and recombination processes, and correlate them with local device structure. We have achieved two aims in this work: first, to develop and apply novel electrically sensitive scanning probe microscopy experiments to study the optoelectronic materials and processes discussed above; and second, to deepen our understanding of the physics underpinning our experimental techniques. In the first case, we have applied conductive-, and photoconductive atomic force (cAFM & pcAFM) microscopy to measure both local photocurrent collection and dark charge transport properties in a variety of model and novel organic solar cell composites, including polymer/fullerene blends, and polymer-nanowire/fullerene blends, finding that local heterogeneity is the rule, and that improvements in the uniformity of specific beneficial nanostructures could lead to large increases in efficiency. We have used scanning Kelvin probe microscopy (SKPM) and time resolved-electrostatic force microscopy (trEFM) to characterize all-polymer blends, quantifying their sensitivity to photochemical degradation and the subsequent formation of local charge traps. We find that while trEFM provides a sensitive measure of local quantum efficiency, SKPM is generally unsuited to measurements of efficiency, less sensitive than tr

  8. Optimal lens design and use in laser-scanning microscopy.

    NARCIS (Netherlands)

    Negrean, A.; Mansvelder, H.D.

    2014-01-01

    In laser-scanning microscopy often an off-the-shelf achromatic doublet is used as a scan lens which can reduce the available diffraction-limited field-of-view (FOV) by a factor of 3 and introduce chromatic aberrations that are scan angle dependent. Here we present several simple lens designs of

  9. Facial recognition and laser surface scan: a pilot study

    DEFF Research Database (Denmark)

    Lynnerup, Niels; Clausen, Maja-Lisa; Kristoffersen, Agnethe May

    2009-01-01

    Surface scanning of the face of a suspect is presented as a way to better match the facial features with those of a perpetrator from CCTV footage. We performed a simple pilot study where we obtained facial surface scans of volunteers and then in blind trials tried to match these scans with 2D...... in forensic facial identification....

  10. Total Navigation in Spine Surgery; A Concise Guide to Eliminate Fluoroscopy Using a Portable Intraoperative Computed Tomography 3-Dimensional Navigation System.

    Science.gov (United States)

    Navarro-Ramirez, Rodrigo; Lang, Gernot; Lian, Xiaofeng; Berlin, Connor; Janssen, Insa; Jada, Ajit; Alimi, Marjan; Härtl, Roger

    2017-04-01

    Portable intraoperative computed tomography (iCT) with integrated 3-dimensional navigation (NAV) offers new opportunities for more precise navigation in spinal surgery, eliminates radiation exposure for the surgical team, and accelerates surgical workflows. We present the concept of "total navigation" using iCT NAV in spinal surgery. Therefore, we propose a step-by-step guideline demonstrating how total navigation can eliminate fluoroscopy with time-efficient workflows integrating iCT NAV into daily practice. A prospective study was conducted on collected data from patients undergoing iCT NAV-guided spine surgery. Number of scans, radiation exposure, and workflow of iCT NAV (e.g., instrumentation, cage placement, localization) were documented. Finally, the accuracy of pedicle screws and time for instrumentation were determined. iCT NAV was successfully performed in 117 cases for various indications and in all regions of the spine. More than half (61%) of cases were performed in a minimally invasive manner. Navigation was used for skin incision, localization of index level, and verification of implant position. iCT NAV was used to evaluate neural decompression achieved in spinal fusion surgeries. Total navigation eliminates fluoroscopy in 75%, thus reducing staff radiation exposure entirely. The average times for iCT NAV setup and pedicle screw insertion were 12.1 and 3.1 minutes, respectively, achieving a pedicle screw accuracy of 99%. Total navigation makes spine surgery safer and more accurate, and it enhances efficient and reproducible workflows. Fluoroscopy and radiation exposure for the surgical staff can be eliminated in the majority of cases. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. The Enhancement of 3D Scans Depth Resolution Obtained by Confocal Scanning of Porous Materials

    Directory of Open Access Journals (Sweden)

    Martisek Dalibor

    2017-12-01

    Full Text Available The 3D reconstruction of simple structured materials using a confocal microscope is widely used in many different areas including civil engineering. Nonetheless, scans of porous materials such as concrete or cement paste are highly problematic. The well-known problem of these scans is low depth resolution in comparison to the horizontal and vertical resolution. The degradation of the image depth resolution is caused by systematic errors and especially by different random events. Our method is focused on the elimination of such random events, mainly the additive noise. We use an averaging method based on the Lindeberg-Lévy theorem that improves the final depth resolution to a level comparable with horizontal and vertical resolution. Moreover, using the least square method, we also precisely determine the limit value of a depth resolution. Therefore, we can continuously evaluate the difference between current resolution and the optimal one. This substantially simplifies the scanning process because the operator can easily determine the required number of scans.

  12. ComPoScan: Adaptive Scanning for Efficient Concurrent Communications and Positioning with 802.11

    DEFF Research Database (Denmark)

    King, Thomas; Kjærgaard, Mikkel Baun

    2008-01-01

    Using 802.11 concurrently for communications and positioning is problematic, especially if location-based services (e.g., indoor navigation) are concurrently executed with real-time applications (e.g., VoIP, video conferencing). Periodical scanning for measuring the signal strength interrupts...

  13. Scanning schemes in white light photoelasticity - Part II: Novel fringe resolution guided scanning scheme

    Science.gov (United States)

    Ramakrishnan, Vivek; Ramesh, K.

    2017-05-01

    Varied spatial resolution of isochromatic fringes over the domain influences the accuracy of fringe order estimation using TFP/RGB photoelasticity. This has been brought out in the first part of the work. The existing scanning schemes do not take this into account, which leads to the propagation of noise from the low spatial resolution zones. In this paper, a method is proposed for creating a whole field map which represents the spatial resolution of the isochromatic fringe pattern. A novel scanning scheme is then proposed whose progression is guided by the spatial resolution of the fringes in the isochromatic image. The efficacy of the scanning scheme is demonstrated using three problems - an inclined crack under bi-axial loading, a thick ring subjected to internal pressure and a stress frozen specimen of an aerospace component. The proposed scheme has use in a range of applications. The scanning scheme is effective even if the model has random zones of noise which is demonstrated using a plate subjected to concentrated load. This aspect is well utilised to extract fringe data from thin slices cut from a stereo-lithographic model that has characteristic random noise due to layered manufacturing.

  14. Towards Automated Nanomanipulation under Scanning Electron Microscopy

    Science.gov (United States)

    Ye, Xutao

    Robotic Nanomaterial Manipulation inside scanning electron microscopes (SEM) is useful for prototyping functional devices and characterizing one-dimensional nanomaterial's properties. Conventionally, manipulation of nanowires has been performed via teleoperation, which is time-consuming and highly skill-dependent. Manual manipulation also has the limitation of low success rates and poor reproducibility. This research focuses on a robotic system capable of automated pick-place of single nanowires. Through SEM visual detection and vision-based motion control, the system transferred individual silicon nanowires from their growth substrate to a microelectromechanical systems (MEMS) device that characterized the nanowires' electromechanical properties. The performances of the nanorobotic pick-up and placement procedures were quantified by experiments. The system demonstrated automated nanowire pick-up and placement with high reliability. A software system for a load-lock-compatible nanomanipulation system is also designed and developed in this research.

  15. Scanning electron microscopy of molluscum contagiosum*

    Science.gov (United States)

    de Almeida Jr, Hiram Larangeira; Abuchaim, Martha Oliveira; Schneider, Maiko Abel; Marques, Leandra; de Castro, Luis Antônio Suíta

    2013-01-01

    Molluscum contagiosum is a disease caused by a poxvirus. It is more prevalent in children up to 5 years of age. There is a second peak of incidence in young adults. In order to examine its ultrastructure, three lesions were curetted without disruption, cut transversely with a scalpel, and routinely processed for scanning electron microscopy (SEM). The oval structure of molluscum contagiosum could be easily identified. In its core, there was a central umbilication and just below this depression, there was a keratinized tunnel. Under higher magnification, a proliferation similar to the epidermis was seen. Moreover, there were areas of cells disposed like a mosaic. Under higher magnification, rounded structures measuring 0.4 micron could be observed at the end of the keratinized tunnel and on the surface of the lesion. PMID:23539009

  16. Development of an automatic pipeline scanning system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae H.; Lee, Jae C.; Moon, Soon S.; Eom, Heung S.; Choi, Yu R

    1999-11-01

    Pressure pipe inspection in nuclear power plants is one of the mandatory regulation items. Comparing to manual ultrasonic inspection, automatic inspection has the benefits of more accurate and reliable inspection results and reduction of radiation disposal. final object of this project is to develop an automatic pipeline inspection system of pressure pipe welds in nuclear power plants. We developed a pipeline scanning robot with four magnetic wheels and 2-axis manipulator for controlling ultrasonic transducers, and developed the robot control computer which controls the robot to navigate along inspection path exactly. We expect our system can contribute to reduction of inspection time, performance enhancement, and effective management of inspection results. The system developed by this project can be practically used for inspection works after field tests. (author)

  17. Hollow-tip scanning photoelectron microscopy

    Science.gov (United States)

    Cherkun, A. P.; Mironov, B. N.; Aseyev, S. A.; Chekalin, S. V.

    2014-07-01

    A new type of microscopy based on scanning in vacuum by a beam of charged particles transmitted through a hollow probe has been implemented. This approach provides controllable motion of spatially localized ion, electron, molecular (atomic), and soft X-ray beams and investigation of the surface in the shear force mode. In the photoelectron mode, in which electrons are transmitted through a 2-μm quartz capillary, a surface profile of gadolinium irradiated by 400-nm femtosecond laser pulses has been visualized with a subwave spatial resolution. The new method of microscopy opens an opportunity of investigations in the field of nanometer local photodesorption of molecular ions (one of the last ideas of V.S. Letokhov).

  18. Conically scanning lidar error in complex terrain

    Directory of Open Access Journals (Sweden)

    Ferhat Bingöl

    2009-05-01

    Full Text Available Conically scanning lidars assume the flow to be homogeneous in order to deduce the horizontal wind speed. However, in mountainous or complex terrain this assumption is not valid implying a risk that the lidar will derive an erroneous wind speed. The magnitude of this error is measured by collocating a meteorological mast and a lidar at two Greek sites, one hilly and one mountainous. The maximum error for the sites investigated is of the order of 10 %. In order to predict the error for various wind directions the flows at both sites are simulated with the linearized flow model, WAsP Engineering 2.0. The measurement data are compared with the model predictions with good results for the hilly site, but with less success at the mountainous site. This is a deficiency of the flow model, but the methods presented in this paper can be used with any flow model.

  19. Compressed-sensing wavenumber-scanning interferometry

    Science.gov (United States)

    Bai, Yulei; Zhou, Yanzhou; He, Zhaoshui; Ye, Shuangli; Dong, Bo; Xie, Shengli

    2018-01-01

    The Fourier transform (FT), the nonlinear least-squares algorithm (NLSA), and eigenvalue decomposition algorithm (EDA) are used to evaluate the phase field in depth-resolved wavenumber-scanning interferometry (DRWSI). However, because the wavenumber series of the laser's output is usually accompanied by nonlinearity and mode-hop, FT, NLSA, and EDA, which are only suitable for equidistant interference data, often lead to non-negligible phase errors. In this work, a compressed-sensing method for DRWSI (CS-DRWSI) is proposed to resolve this problem. By using the randomly spaced inverse Fourier matrix and solving the underdetermined equation in the wavenumber domain, CS-DRWSI determines the nonuniform sampling and spectral leakage of the interference spectrum. Furthermore, it can evaluate interference data without prior knowledge of the object. The experimental results show that CS-DRWSI improves the depth resolution and suppresses sidelobes. It can replace the FT as a standard algorithm for DRWSI.

  20. Spin-polarized scanning tunnelling microscopy

    CERN Document Server

    Bode, M

    2003-01-01

    The recent experimental progress in spin-polarized scanning tunnelling microscopy (SP-STM) - a magnetically sensitive imaging technique with ultra-high resolution - is reviewed. The basics of spin-polarized electron tunnelling are introduced as they have been investigated in planar tunnel junctions for different electrode materials, i.e. superconductors, optically excited GaAs, and ferromagnets. It is shown that ferromagnets and antiferromagnets are suitable tip materials for the realization of SP-STM. Possible tip designs and modes of operations are discussed for both classes of materials. The results of recent spatially resolved measurements as performed with different magnetic probe tips and using different modes of operation are reviewed and discussed in terms of applicability to surfaces, thin films, and nanoparticles. The limits of spatial resolution, and the impact of an external magnetic field on the imaging process.

  1. Potential biomedical applications of the scanned nanopipette.

    Science.gov (United States)

    Klenerman, David; Korchev, Yuri

    2006-06-01

    One grand challenge in current biology is to understand how individual cellular molecules interact together to form a functioning living cell. This requires new methods to image a live cell on the nanoscale. The scanned nanopipette can be used to obtain high resolution noncontact images of the surface of live cells under physiological conditions and has been used to develop a family of related methods that allow mapping of cell function on the nanoscale, and hence allow the relationship between cell structure and function to be probed. This is a powerful method to bridge the current gap between high resolution structures of individual molecular complexes and low resolution imaging of live cell structure and function.

  2. Scan Quantum Mechanics: Quantum Inertia Stops Superposition

    CERN Document Server

    Gato-Rivera, Beatriz

    2015-01-01

    A novel interpretation of the quantum mechanical superposition is put forward. Quantum systems scan all possible available states and switch randomly and very rapidly among them. The longer they remain in a given state, the larger the probability of the system to be found in that state during a measurement. A crucial property that we postulate is quantum inertia, that increases whenever a constituent is added, or the system is perturbed with all kinds of interactions. Once the quantum inertia $I_q$ reaches a critical value $I_{cr}$ for an observable, the switching among the different eigenvalues of that observable stops and the corresponding superposition comes to an end. Consequently, increasing the mass, temperature, gravitational force, etc. of a quantum system increases its quantum inertia until the superposition of states disappears for all the observables and the system transmutes into a classical one. The process could be reversible decreasing the size, temperature, gravitational force, etc. leading to...

  3. Scanning and georeferencing historical USGS quadrangles

    Science.gov (United States)

    Fishburn, Kristin A.; Davis, Larry R.; Allord, Gregory J.

    2017-06-23

    The U.S. Geological Survey (USGS) National Geospatial Program is scanning published USGS 1:250,000-scale and larger topographic maps printed between 1884, the inception of the topographic mapping program, and 2006. The goal of this project, which began publishing the Historical Topographic Map Collection in 2011, is to provide access to a digital repository of USGS topographic maps that is available to the public at no cost. For more than 125 years, USGS topographic maps have accurately portrayed the complex geography of the Nation. The USGS is the Nation’s largest producer of traditional topographic maps, and, prior to 2006, USGS topographic maps were created using traditional cartographic methods and printed using a lithographic process. The next generation of topographic maps, US Topo, is being released by the USGS in digital form, and newer technologies make it possible to also deliver historical maps in the same electronic format that is more publicly accessible.

  4. Differential Aging Signals in Abdominal CT Scans.

    Science.gov (United States)

    Orlov, Nikita V; Makrogiannis, Sokratis; Ferrucci, Luigi; Goldberg, Ilya G

    2017-12-01

    Changes in the composition of body tissues are major aging phenotypes, but they have been difficult to study in depth. Here we describe age-related change in abdominal tissues observable in computed tomography (CT) scans. We used pattern recognition and machine learning to detect and quantify these changes in a model-agnostic fashion. CT scans of abdominal L4 sections were obtained from Baltimore Longitudinal Study of Aging (BLSA) participants. Age-related change in the constituent tissues were determined by training machine classifiers to differentiate age groups within male and female strata ("Younger" at 50-70 years old vs "Older" at 80-99 years old). The accuracy achieved by the classifiers in differentiating the age cohorts was used as a surrogate measure of the aging signal in the different tissues. The highest accuracy for discriminating age differences was 0.76 and 0.72 for males and females, respectively. The classification accuracy was 0.79 and 0.71 for adipose tissue, 0.70 and 0.68 for soft tissue, and 0.65 and 0.64 for bone. Using image data from a large sample of well-characterized pool of participants dispersed over a wide age range, we explored age-related differences in gross morphology and texture of abdominal tissues. This technology is advantageous for tracking effects of biological aging and predicting adverse outcomes when compared to the traditional use of specific molecular biomarkers. Application of pattern recognition and machine learning as a tool for analyzing medical images may provide much needed insight into tissue changes occurring with aging and, further, connect these changes with their metabolic and functional consequences. Published by Elsevier Inc.

  5. Mutation scanning of peach floral genes

    Directory of Open Access Journals (Sweden)

    Wilde H Dayton

    2011-05-01

    Full Text Available Abstract Background Mutation scanning technology has been used to develop crop species with improved traits. Modifications that improve screening throughput and sensitivity would facilitate the targeted mutation breeding of crops. Technical innovations for high-resolution melting (HRM analysis are enabling the clinic-based screening for human disease gene polymorphism. We examined the application of two HRM modifications, COLD-PCR and QMC-PCR, to the mutation scanning of genes in peach, Prunus persica. The targeted genes were the putative floral regulators PpAGAMOUS and PpTERMINAL FLOWER I. Results HRM analysis of PpAG and PpTFL1 coding regions in 36 peach cultivars found one polymorphic site in each gene. PpTFL1 and PpAG SNPs were used to examine approaches to increase HRM throughput. Cultivars with SNPs could be reliably detected in pools of twelve genotypes. COLD-PCR was found to increase the sensitivity of HRM analysis of pooled samples, but worked best with small amplicons. Examination of QMC-PCR demonstrated that primary PCR products for further analysis could be produced from variable levels of genomic DNA. Conclusions Natural SNPs in exons of target peach genes were discovered by HRM analysis of cultivars from a southeastern US breeding program. For detecting natural or induced SNPs in larger populations, HRM efficiency can be improved by increasing sample pooling and template production through approaches such as COLD-PCR and QMC-PCR. Technical advances developed to improve clinical diagnostics can play a role in the targeted mutation breeding of crops.

  6. Cryogenic Scan Mechanism for Fourier Transform Spectrometer

    Science.gov (United States)

    Brasunas, John C.; Francis, John L.

    2011-01-01

    A compact and lightweight mechanism has been developed to accurately move a Fourier transform spectrometer (FTS) scan mirror (a cube corner) in a near-linear fashion with near constant speed at cryogenic temperatures. This innovation includes a slide mechanism to restrict motion to one dimension, an actuator to drive the motion, and a linear velocity transducer (LVT) to measure the speed. The cube corner mirror is double-passed in one arm of the FTS; double-passing is required to compensate for optical beam shear resulting from tilting of the moving cube corner. The slide, actuator, and LVT are off-the-shelf components that are capable of cryogenic vacuum operation. The actuator drives the slide for the required travel of 2.5 cm. The LVT measures translation speed. A proportional feedback loop compares the LVT voltage with the set voltage (speed) to derive an error signal to drive the actuator and achieve near constant speed. When the end of the scan is reached, a personal computer reverses the set voltage. The actuator and LVT have no moving parts in contact, and have magnetic properties consistent with cryogenic operation. The unlubricated slide restricts motion to linear travel, using crossed roller bearings consistent with 100-million- stroke operation. The mechanism tilts several arc seconds during transport of the FTS mirror, which would compromise optical fringe efficiency when using a flat mirror. Consequently, a cube corner mirror is used, which converts a tilt into a shear. The sheared beam strikes (at normal incidence) a flat mirror at the end of the FTS arm with the moving mechanism, thereby returning upon itself and compensating for the shear

  7. Effects of Optimizing the Scan-Path on Scanning Keyboards with QWERTY-Layout for English Text.

    Science.gov (United States)

    Sandnes, Frode Eika; Medola, Fausto Orsi

    2017-01-01

    Scanning keyboards can be essential tools for individuals with reduced motor function. However, most research addresses layout optimization. Learning new layouts is time-consuming. This study explores the familiar QWERTY layout with alternative scanning paths intended for English text. The results show that carefully designed scan-paths can help QWERTY nearly match optimized layouts in performance.

  8. Diagnosis of uveo-parotid fever by /sup 67/Ga-citrate imaging

    Energy Technology Data Exchange (ETDEWEB)

    Oren, V.O.; Uszler, J.M.; White, J.

    1978-04-01

    /sup 67/Ga-citrate scan from skull to mid-abdomen showed increased uptake in both parotid glands, mediastinum, lungs, uvei and/or enlarged lacrimal glands. The differential diagnosis of the positive radiogallium scan is discussed with emphasis on the value of the extrathoracic findings. Tissue diagnosis confirmed the imaging diagnosis of sarcoidosis. The case illustrates the usefulness of double radionuclide study - /sup 67/Ga and 99mTc-MAA - and of the tomographic scanner in defining the spread of the active granulomatous disease.

  9. Research on Network Scanning Strategy Based on Information Granularity

    Science.gov (United States)

    Qin, Futong; Shi, Pengfei; Du, Jing; Cheng, Ruosi; Zhou, Yunyan

    2017-10-01

    As the basic mean to obtain the information of the targets network, network scanning is often used to discover the security risks and vulnerabilities existing on the network. However, with the development of network technology, the scale of network is more and more large, and the network scanning efficiency put forward higher requirements. In this paper, the concept of network scanning information granularity is proposed, and the design method of network scanning strategy based on information granularity is proposed. Based on single information granularity and hybrid information granularity, four network scanning strategies were designed and verified experimentally. Experiments show that the network scanning strategies based on hybrid information granularity can improve the efficiency of network scanning.

  10. Anterior ethmoidal artery evaluation on coronal CT scans.

    Science.gov (United States)

    Souza, Soraia Ale; Souza, Marcia Maria Ale de; Gregório, Luís Carlos; Ajzen, Sergio

    2009-01-01

    The anterior ethmoidal artery (AEA) is an important point for frontal and ethmoid sinuses surgery. CT scans can identify landmarks to help the surgeon find the AEA. To identify the landmarks of the AEA on the orbital medial wall and on the lateral wall of the olfactory fossa. and to correlate the presence of supraorbital ethmoidal cells with spotting the anterior ethmoidal artery canal. Retrospective review of 198 direct coronal paranasal sinuses computed tomography (CT) scans from August to December, 2006. Supraorbital pneumatization was seen in 35% (70 scans). The AEA canal was seen in 41% (81 scans). The anterior ethmoidal sulcus was seen in 98% (194 scans) and the anterior ethmoidal foramen was seen in all the scans (100%). The anterior ethmoidal foramen and the anterior ethmoidal sulcus were anatomical landmarks present in almost 100% of the scans studied. There was a correlation between the presence of supraorbital pneumatization and AEA canal visualization.

  11. MONTE CARLO SIMULATION OF MULTIFOCAL STOCHASTIC SCANNING SYSTEM

    Directory of Open Access Journals (Sweden)

    LIXIN LIU

    2014-01-01

    Full Text Available Multifocal multiphoton microscopy (MMM has greatly improved the utilization of excitation light and imaging speed due to parallel multiphoton excitation of the samples and simultaneous detection of the signals, which allows it to perform three-dimensional fast fluorescence imaging. Stochastic scanning can provide continuous, uniform and high-speed excitation of the sample, which makes it a suitable scanning scheme for MMM. In this paper, the graphical programming language — LabVIEW is used to achieve stochastic scanning of the two-dimensional galvo scanners by using white noise signals to control the x and y mirrors independently. Moreover, the stochastic scanning process is simulated by using Monte Carlo method. Our results show that MMM can avoid oversampling or subsampling in the scanning area and meet the requirements of uniform sampling by stochastically scanning the individual units of the N × N foci array. Therefore, continuous and uniform scanning in the whole field of view is implemented.

  12. Scanning tunneling spectroscopy of Pb thin films

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Michael

    2010-12-13

    The present thesis deals with the electronic structure, work function and single-atom contact conductance of Pb thin films, investigated with a low-temperature scanning tunneling microscope. The electronic structure of Pb(111) thin films on Ag(111) surfaces is investigated using scanning tunneling spectroscopy (STS). Quantum size effects, in particular, quantum well states (QWSs), play a crucial role in the electronic and physical properties of these films. Quantitative analysis of the spectra yields the QWS energies as a function of film thickness, the Pb bulk-band dispersion in {gamma}-L direction, scattering phase shifts at the Pb/Ag interface and vacuum barrier as well as the lifetime broadening at anti {gamma}. The work function {phi} is an important property of surfaces, which influences catalytic reactivity and charge injection at interfaces. It controls the availability of charge carriers in front of a surface. Modifying {phi} has been achieved by deposition of metals and molecules. For investigating {phi} at the atomic scale, scanning tunneling microscopy (STM) has become a widely used technique. STM measures an apparent barrier height {phi}{sub a}, which is commonly related to the sample work function {phi}{sub s} by: {phi}{sub a}=({phi}{sub s}+{phi}{sub t}- vertical stroke eV vertical stroke)/2, with {phi}{sub t} the work function of the tunneling tip, V the applied tunneling bias voltage, and -e the electron charge. Hence, the effect of the finite voltage in STM on {phi}{sub a} is assumed to be linear and the comparison of {phi}{sub a} measured at different surface sites is assumed to yield quantitative information about work function differences. Here, the dependence of {phi}{sub a} on the Pb film thickness and applied bias voltage V is investigated. {phi}{sub a} is found to vary significantly with V. This bias dependence leads to drastic changes and even inversion of contrast in spatial maps of {phi}{sub a}, which are related to the QWSs in the Pb

  13. MEMS-BASED 3D CONFOCAL SCANNING MICROENDOSCOPE USING MEMS SCANNERS FOR BOTH LATERAL AND AXIAL SCAN.

    Science.gov (United States)

    Liu, Lin; Wang, Erkang; Zhang, Xiaoyang; Liang, Wenxuan; Li, Xingde; Xie, Huikai

    2014-08-15

    A fiber-optic 3D confocal scanning microendoscope employing MEMS scanners for both lateral and axial scan was designed and constructed. The MEMS 3D scan engine achieved a lateral scan range of over ± 26° with a 2D MEMS scanning micromirror and a depth scan of over 400 μm with a 1D MEMS tunable microlens. The lateral resolution and axial resolution of this system were experimentally measured as 1.0 μm and 7.0 μm, respectively. 2D and 3D confocal reflectance images of micro-patterns, micro-particles, onion skins and acute rat brain tissue were obtained by this MEMS-based 3D confocal scanning microendoscope.

  14. If brain scans really detected deception, who would volunteer to be scanned?

    Science.gov (United States)

    Spence, Sean A; Hope-Urwin, Alexandra; Lankappa, Sudheer T; Woodhead, Jean; Burgess, Jenny C L; Mackay, Alice V

    2010-09-01

    Recent neuroimaging studies investigating the neural correlates of deception among healthy people, have raised the possibility that such methods may eventually be applied during legal proceedings. Were this so, who would volunteer to be scanned? We report a "natural experiment" casting some light upon this question. Following broadcast of a television series describing our team's investigative neuroimaging of deception in 2007, we received unsolicited (public) correspondence for 12 months. Using a customized template to examine this material, three independent assessors unanimously rated 30 of an initial 56 communications as unequivocally constituting requests for a "scan" (to demonstrate their author's "innocence"). Compared with the rest, these index communications were more likely to originate from incarcerated males, who were also more likely to engage in further correspondence. Hence, in conclusion, if neuroimaging were to become an acceptable means of demonstrating innocence then incarcerated males may well constitute those volunteering for such investigation. © 2010 American Academy of Forensic Sciences.

  15. A dark mode in scanning thermal microscopy

    Science.gov (United States)

    Ramiandrisoa, Liana; Allard, Alexandre; Joumani, Youssef; Hay, Bruno; Gomés, Séverine

    2017-12-01

    The need for high lateral spatial resolution in thermal science using Scanning Thermal Microscopy (SThM) has pushed researchers to look for more and more tiny probes. SThM probes have consequently become more and more sensitive to the size effects that occur within the probe, the sample, and their interaction. Reducing the tip furthermore induces very small heat flux exchanged between the probe and the sample. The measurement of this flux, which is exploited to characterize the sample thermal properties, requires then an accurate thermal management of the probe-sample system and to reduce any phenomenon parasitic to this system. Classical experimental methodologies must then be constantly questioned to hope for relevant and interpretable results. In this paper, we demonstrate and estimate the influence of the laser of the optical force detection system used in the common SThM setup that is based on atomic-force microscopy equipment on SThM measurements. We highlight the bias induced by the overheating due to the laser illumination on the measurements performed by thermoresistive probes (palladium probe from Kelvin Nanotechnology). To face this issue, we propose a new experimental procedure based on a metrological approach of the measurement: a SThM "dark mode." The comparison with the classical procedure using the laser shows that errors between 14% and 37% can be reached on the experimental data exploited to determine the heat flux transferred from the hot probe to the sample.

  16. MEMS scanned laser head-up display

    Science.gov (United States)

    Freeman, Mark O.

    2011-03-01

    Head-up displays (HUD) in automobiles and other vehicles have been shown to significantly reduce accident rates by keeping the driver's eyes on the road. The requirements for automotive HUDs are quite demanding especially in terms of brightness, dimming range, supplied power, and size. Scanned laser display technology is particularly well-suited to this application since the lasers can be very efficiently relayed to the driver's eyes. Additionally, the lasers are only turned on where the light is needed in the image. This helps to provide the required brightness while minimizing power and avoiding a background glow that disturbs the see-through experience. Microvision has developed a couple of HUD architectures that are presented herein. One design uses an exit pupil expander and relay optics to produce a high quality virtual image for built-in systems where the image appears to float above the hood of the auto. A second design uses a patented see-through screen technology and pico projector to make automotive HUDs available to anyone with a projector. The presentation will go over the basic designs for the two types of HUD and discuss design tradeoffs.

  17. Comparing laser printing and barcode scanning designs

    Science.gov (United States)

    MacArthur, Thomas D.

    1991-02-01

    A comparison of requirements and designs for barcode and non-impact printer scanners reveals similarities and differences that may be useful in leading to new solutions for barcode scanner problems. The non-impact printer scanner has been in volume production for over 10 years successfully achieving low cost high performance and high quality targets. Where requirements are found to overlap solutions already implemented and proven for printer applications may fmd further application in bar code scanners. Typical technologies used for printing include flying spot scanners liquid crystal shutters scophony scanners and LED arrays. Of primary concern in measuring figure of merit are such critical parameters as cost lifetime reliability conformance to regulatory standards environmental ruggedness power consumption compactness insensitivity to orientation acoustic noise produced modularity spot size depth of field exposure level and uniformity data rate scan length and uniformity and many more. A comparison of printing technologies their capabilities and their limitations with those used in barcode scanners may reveal common problems where we can take advantage of work already completed in similar application where requirements are found to overlap.

  18. Scanning anisotropy parameters in complex media

    KAUST Repository

    Alkhalifah, Tariq Ali

    2011-03-21

    Parameter estimation in an inhomogeneous anisotropic medium offers many challenges; chief among them is the trade-off between inhomogeneity and anisotropy. It is especially hard to estimate the anisotropy anellipticity parameter η in complex media. Using perturbation theory and Taylor’s series, I have expanded the solutions of the anisotropic eikonal equation for transversely isotropic (TI) media with a vertical symmetry axis (VTI) in terms of the independent parameter η from a generally inhomogeneous elliptically anisotropic medium background. This new VTI traveltime solution is based on a set of precomputed perturbations extracted from solving linear partial differential equations. The traveltimes obtained from these equations serve as the coefficients of a Taylor-type expansion of the total traveltime in terms of η. Shanks transform is used to predict the transient behavior of the expansion and improve its accuracy using fewer terms. A homogeneous medium simplification of the expansion provides classical nonhyperbolic moveout descriptions of the traveltime that are more accurate than other recently derived approximations. In addition, this formulation provides a tool to scan for anisotropic parameters in a generally inhomogeneous medium background. A Marmousi test demonstrates the accuracy of this approximation. For a tilted axis of symmetry, the equations are still applicable with a slightly more complicated framework because the vertical velocity and δ are not readily available from the data.

  19. Phase-contrast scanning transmission electron microscopy.

    Science.gov (United States)

    Minoda, Hiroki; Tamai, Takayuki; Iijima, Hirofumi; Hosokawa, Fumio; Kondo, Yukihito

    2015-06-01

    This report introduces the first results obtained using phase-contrast scanning transmission electron microscopy (P-STEM). A carbon-film phase plate (PP) with a small center hole is placed in the condenser aperture plane so that a phase shift is introduced in the incident electron waves except those passing through the center hole. A cosine-type phase-contrast transfer function emerges when the phase-shifted scattered waves interfere with the non-phase-shifted unscattered waves, which passed through the center hole before incidence onto the specimen. The phase contrast resulting in P-STEM is optically identical to that in phase-contrast transmission electron microscopy that is used to provide high contrast for weak phase objects. Therefore, the use of PPs can enhance the phase contrast of the STEM images of specimens in principle. The phase shift resulting from the PP, whose thickness corresponds to a phase shift of π, has been confirmed using interference fringes displayed in the Ronchigram of a silicon single crystal specimen. The interference fringes were found to abruptly shift at the edge of the PP hole by π. © The Author 2015. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  20. Scanning tunneling microscope spectroscopy of polymers.

    Science.gov (United States)

    Zypman, Fredy R

    2002-01-01

    This paper presents theoretical results on the relationship between density of states (DOS) and scanning tunneling microscope current-voltage curves in polymers. We considered samples of linear hydrocarbons electrically grounded at one of their extremes. The other extreme is electrically connected to the microscope tip via electron tunneling through vacuum. When a voltage, V, is applied to the tip, electric current, I, flows in the tip-sample circuit. This current varies as the voltage varies and depends on the DOS to the extent that no current would flow if no electron states exist at a certain energy (or voltage). The detailed relationship between DOS and the current-voltage (I-V) curve is not known a priori. We solve the corresponding quantum problem in the context of tight binding and find that I-V reproduces accurately the resonant energy peaks of the DOS. We apply the results to 100 atom-long alkane and alkene chains and found that there is a significant voltage shift in the corresponding curves as to discriminate one structure from the other.

  1. Horizon scanning for new genomic tests.

    Science.gov (United States)

    Gwinn, Marta; Grossniklaus, Daurice A; Yu, Wei; Melillo, Stephanie; Wulf, Anja; Flome, Jennifer; Dotson, W David; Khoury, Muin J

    2011-02-01

    The development of health-related genomic tests is decentralized and dynamic, involving government, academic, and commercial entities. Consequently, it is not easy to determine which tests are in development, currently available, or discontinued. We developed and assessed the usefulness of a systematic approach to identifying new genomic tests on the Internet. We devised targeted queries of Web pages, newspaper articles, and blogs (Google Alerts) to identify new genomic tests. We finalized search and review procedures during a pilot phase that ended in March 2010. Queries continue to run daily and are compiled weekly; selected data are indexed in an online database, the Genomic Applications in Practice and Prevention Finder. After the pilot phase, our scan detected approximately two to three new genomic tests per week. Nearly two thirds of all tests (122/188, 65%) were related to cancer; only 6% were related to hereditary disorders. Although 88 (47%) of the tests, including 2 marketed directly to consumers, were commercially available, only 12 (6%) claimed United States Food and Drug Administration licensure. Systematic surveillance of the Internet provides information about genomic tests that can be used in combination with other resources to evaluate genomic tests. The Genomic Applications in Practice and Prevention Finder makes this information accessible to a wide group of stakeholders.

  2. Automatic change detection using mobile laser scanning

    Science.gov (United States)

    Hebel, M.; Hammer, M.; Gordon, M.; Arens, M.

    2014-10-01

    Automatic change detection in 3D environments requires the comparison of multi-temporal data. By comparing current data with past data of the same area, changes can be automatically detected and identified. Volumetric changes in the scene hint at suspicious activities like the movement of military vehicles, the application of camouflage nets, or the placement of IEDs, etc. In contrast to broad research activities in remote sensing with optical cameras, this paper addresses the topic using 3D data acquired by mobile laser scanning (MLS). We present a framework for immediate comparison of current MLS data to given 3D reference data. Our method extends the concept of occupancy grids known from robot mapping, which incorporates the sensor positions in the processing of the 3D point clouds. This allows extracting the information that is included in the data acquisition geometry. For each single range measurement, it becomes apparent that an object reflects laser pulses in the measured range distance, i.e., space is occupied at that 3D position. In addition, it is obvious that space is empty along the line of sight between sensor and the reflecting object. Everywhere else, the occupancy of space remains unknown. This approach handles occlusions and changes implicitly, such that the latter are identifiable by conflicts of empty space and occupied space. The presented concept of change detection has been successfully validated in experiments with recorded MLS data streams. Results are shown for test sites at which MLS data were acquired at different time intervals.

  3. Scanning for piecewise holographic grating generation

    Science.gov (United States)

    Miler, Miroslav; Kostka, František; Dvořák, Martin

    2006-03-01

    Holographic gratings that are recorded as a whole in a single exposition are limited in size because of the available power of suitable laser sources and nonlinear response of and/or reciprocity effects in a recording medium. A sequential-illumination technique can help in this case. This technique relies on piecewise grating recording that consists in scanning with a relatively narrow laser beam, a pencil, across the grating surface employing an appropriate optical set up. The contribution describes a method utilizing a small parallel displacement of the laser pencil by turning a plane-parallel plate, which is then transferred to a larger angular deflection by a short focus lens. Simultaneously, the beam is expanded angularly. This all can take place either before light enters the beam-splitter or along paths of both the interfering beams. In this way, uniform diffraction efficiency gratings that are much larger than the cross-section of the beam can be achieved. The laser pencil can be moved in polar or rectangular coordinates. Recording of larger gratings supposes large precise collimating mirrors. If they are not available e.g. due to their high price, they can be replaced by long propagating homocentric beams with their origins in the same distance from the recording plate.

  4. Dental Wear: A Scanning Electron Microscope Study

    Directory of Open Access Journals (Sweden)

    Luca Levrini

    2014-01-01

    Full Text Available Dental wear can be differentiated into different types on the basis of morphological and etiological factors. The present research was carried out on twelve extracted human teeth with dental wear (three teeth showing each type of wear: erosion, attrition, abrasion, and abfraction studied by scanning electron microscopy (SEM. The study aimed, through analysis of the macro- and micromorphological features of the lesions (considering the enamel, dentin, enamel prisms, dentinal tubules, and pulp, to clarify the different clinical and diagnostic presentations of dental wear and their possible significance. Our results, which confirm current knowledge, provide a complete overview of the distinctive morphology of each lesion type. It is important to identify the type of dental wear lesion in order to recognize the contributing etiological factors and, consequently, identify other more complex, nondental disorders (such as gastroesophageal reflux, eating disorders. It is clear that each type of lesion has a specific morphology and mechanism, and further clinical studies are needed to clarify the etiological processes, particularly those underlying the onset of abfraction.

  5. New Applications of Scanning Tunneling Microscopy

    Science.gov (United States)

    Smith, Douglas Philip Edward

    This dissertation describes the application of the scanning tunneling microscope (STM) technique to four new fields of study: thin organic films, phonon spectroscopy of bulk surfaces, the vibrational spectroscopy of molecules, and the tribological forces which occur between STM tip and sample. Images with atomic resolution were obtained with speeds approaching video rates. Two types of microscopes were used: one operated at room temperature in air, another at 4.2K in liquid helium. At room temperature, the STM was able to image molecules of cadmium arachidate deposited onto graphite by the Langmuir-Blodgett technique. The packing of molecules in the lipid bilayer was found to be partially ordered, with density of 1 molecule per 19.4 square angstroms. At liquid-helium temperature, inelastic electron processes were detected, and it was possible to determine within an area of a few square angstroms where the vibrational excitations occurred. On a bare graphite substrate, phonons of the sample and tip caused step increases in the tunneling conductivity at the phonon energies. Molecules of sorbic acid could be resolved when deposited onto graphite, and these molecules caused spatially localized peaks in conductivity at the energies of the bond vibrations. Although the STM is usually considered a non-contact instrument, under certain circumstances the tip and sample exerted strong forces on each other. With a tungsten tip and a graphite sample, friction and mechanical deformations on the atomic scale were observed.

  6. Investigation of the Scanning Microarc Oxidation Process

    Directory of Open Access Journals (Sweden)

    Lingqin Xia

    2017-01-01

    Full Text Available Scanning microarc oxidation (SMAO is a coating process which is based on conventional microarc oxidation (MAO. The key difference is that deposition in SMAO is achieved by using a stainless steel nozzle to spray an electrolyte stream on the substrate surface as opposed to immersing the workpiece in an electrolyzer. In the present study, SMAO discharge characteristics, coating morphology, and properties are analyzed and compared to results obtained from MAO under similar conditions. Results show that MAO and SMAO have comparable spark and microarc lifetimes and sizes, though significant differences in incubation time and discharge distribution were evident. Results also showed that the voltage and current density for MAO and SMAO demonstrate similar behavior but have markedly different transient and steady-state values. Results obtained from coating A356 aluminum sheet show that oxide thickness and growth rate in SMAO are strongly dependent on interelectrode spacing and travel speed. Analysis of the SMAO coating morphology and structure showed that a denser and slightly harder layer was deposited in comparison to MAO and is attributed to reduced porosity and increased formation of α-Al2O3. Preliminary results indicate that SMAO represents a viable process for coating of aluminum surfaces.

  7. Patterns of pulmonary perfusion scans in normal subjects

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, J.M.; Moser, K.M.; Hartman, M.T.; Ashburn, W.L.

    1981-01-01

    A vital factor conditioning the usage of the pulmonary perfusion (Q) scan in the evaluation of patients suspected of pulmonary embolism is the prevalence of abnormal Q scans in subjects free of cardiopulmonary disease. Because this prevalence has not been well defined, we performed Q scans in 80 nonsmoking subjects 18 to 29 yr of age having no known active cardiopulmonary disease. Each subject underwent a history, physical examination, electrocardiogram, spirometry, and PA chest roentgenogram, followed by a 6-view Q scan. Two subjects in whom a Q defect was suspected underwent a /sup 133/Xe equilibrium-washout ventilation (V) scan. All Q scans were interpreted blindly and independently by 2 experienced readers. Seventy-nine of the 80 Q scans were read as normal. No subject demonstrated a lobar or segmental defect. One of the 80 subjects, who had a mild pectus excavatum, had a left upper lobe subsegmental defect, which was not seen on the V scan. Based on the statistical analysis of these data, no more than 3.68% of normal nonsmoking persons in this age group may have a lobar or segmental Q scan defect and no more than 6.77% may have a subsegmental defect (with 95% confidence). Therefore, our study indicated that Q scan defects, particularly lobar or segmental, are rarely present among normal nonsmokers in this age group.

  8. Implementation of 3D Optical Scanning Technology for Automotive Applications.

    Science.gov (United States)

    Kuş, Abdil

    2009-01-01

    Reverse engineering (RE) is a powerful tool for generating a CAD model from the 3D scan data of a physical part that lacks documentation or has changed from the original CAD design of the part. The process of digitizing a part and creating a CAD model from 3D scan data is less time consuming and provides greater accuracy than manually measuring the part and designing the part from scratch in CAD. 3D optical scanning technology is one of the measurement methods which have evolved over the last few years and it is used in a wide range of areas from industrial applications to art and cultural heritage. It is also used extensively in the automotive industry for applications such as part inspections, scanning of tools without CAD definition, scanning the casting for definition of the stock (i.e. the amount of material to be removed from the surface of the castings) model for CAM programs and reverse engineering. In this study two scanning experiments of automotive applications are illustrated. The first one examines the processes from scanning to re-manufacturing the damaged sheet metal cutting die, using a 3D scanning technique and the second study compares the scanned point clouds data to 3D CAD data for inspection purposes. Furthermore, the deviations of the part holes are determined by using different lenses and scanning parameters.

  9. Implementation of 3D Optical Scanning Technology for Automotive Applications

    Science.gov (United States)

    Kuş, Abdil

    2009-01-01

    Reverse engineering (RE) is a powerful tool for generating a CAD model from the 3D scan data of a physical part that lacks documentation or has changed from the original CAD design of the part. The process of digitizing a part and creating a CAD model from 3D scan data is less time consuming and provides greater accuracy than manually measuring the part and designing the part from scratch in CAD. 3D optical scanning technology is one of the measurement methods which have evolved over the last few years and it is used in a wide range of areas from industrial applications to art and cultural heritage. It is also used extensively in the automotive industry for applications such as part inspections, scanning of tools without CAD definition, scanning the casting for definition of the stock (i.e. the amount of material to be removed from the surface of the castings) model for CAM programs and reverse engineering. In this study two scanning experiments of automotive applications are illustrated. The first one examines the processes from scanning to re-manufacturing the damaged sheet metal cutting die, using a 3D scanning technique and the second study compares the scanned point clouds data to 3D CAD data for inspection purposes. Furthermore, the deviations of the part holes are determined by using different lenses and scanning parameters. PMID:22573995

  10. Safe Active Scanning for Energy Delivery Systems Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Helms, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Salazar, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Scheibel, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Engels, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reiger, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-30

    The Department of Energy’s Cybersecurity for Energy Delivery Systems Program has funded Safe(r) Active Scanning for Energy Delivery Systems, led by Lawrence Livermore National Laboratory, to investigate and analyze the impacts of active scanning in the operational environment of energy delivery systems. In collaboration with Pacific Northwest National Laboratory and Idaho National Laboratory, active scans across three testbeds including 38 devices were performed. This report gives a summary of the initial literature survey performed on the SASEDS project as well as industry partner interview summaries and main findings from Phase 1 of the project. Additionally, the report goes into the details of scanning techniques, methodologies for testing, testbed descriptions, and scanning results, with appendices to elaborate on the specific scans that were performed. As a result of testing, a single device out of 38 exhibited problems when actively scanned, and a reboot was required to fix it. This single failure indicates that active scanning is not likely to have a detrimental effect on the safety and resilience of energy delivery systems. We provide a path forward for future research that could enable wide adoption of active scanning and lead utilities to incorporate active scanning as part of their default network security plans to discover and rectify rogue devices, adversaries, and services that may be on the network. This increased network visibility will allow operational technology cybersecurity practitioners to improve their situational awareness of networks and their vulnerabilities.

  11. Timing to Block Scanning Malwares by Using Combinatorics Proliferation Model

    Science.gov (United States)

    Omote, Kazumasa; Shimoyama, Takeshi; Torii, Satoru

    One of the worst threats present in an enterprise network is the propagation of "scanning malware" (e.g., scanning worms and bots). It is important to prevent such scanning malware from spreading within an enterprise network. It is especially important to suppress scanning malware infection to less than a few infected hosts. We estimated the timing of containment software to block "scanning malware" in a homogeneous enterprise network. The "combinatorics proliferation model", based on discrete mathematics, developed in this study derives a threshold that gives the number of the packets sent by a victim that must not be exceeded in order to suppress the number of infected hosts to less than a few. This model can appropriately express the early state under which an infection started. The result from our model fits very well to the result of computer simulation using a typical existing scanning malware and an actual network.

  12. System and method for compressive scanning electron microscopy

    Science.gov (United States)

    Reed, Bryan W

    2015-01-13

    A scanning transmission electron microscopy (STEM) system is disclosed. The system may make use of an electron beam scanning system configured to generate a plurality of electron beam scans over substantially an entire sample, with each scan varying in electron-illumination intensity over a course of the scan. A signal acquisition system may be used for obtaining at least one of an image, a diffraction pattern, or a spectrum from the scans, the image, diffraction pattern, or spectrum representing only information from at least one of a select subplurality or linear combination of all pixel locations comprising the image. A dataset may be produced from the information. A subsystem may be used for mathematically analyzing the dataset to predict actual information that would have been produced by each pixel location of the image.

  13. Scan-rescan reproducibility of CT densitometric measures of emphysema

    Science.gov (United States)

    Chong, D.; van Rikxoort, E. M.; Kim, H. J.; Goldin, J. G.; Brown, M. S.

    2011-03-01

    This study investigated the reproducibility of HRCT densitometric measures of emphysema in patients scanned twice one week apart. 24 emphysema patients from a multicenter study were scanned at full inspiration (TLC) and expiration (RV), then again a week later for four scans total. Scans for each patient used the same scanner and protocol, except for tube current in three patients. Lung segmentation with gross airway removal was performed on the scans. Volume, weight, mean lung density (MLD), relative area under -950HU (RA-950), and 15th percentile (PD-15) were calculated for TLC, and volume and an airtrapping mask (RA-air) between -950 and -850HU for RV. For each measure, absolute differences were computed for each scan pair, and linear regression was performed against volume difference in a subgroup with volume difference emphysema treatment efficacy.

  14. Usefulness of Thallium Scan for Differential Diagnosis of Breast Mass

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Sang Kyun; Yum, Ha Yong; Lee, Chung Han; Choi, Kyung Hyun [Kosin University College of Medicine, Pusan (Korea, Republic of)

    1994-07-15

    The purpose of this study is to evaluate thallium scanning as a potential test in differentiating malignant from benign lesions of breast. Thirty-one female patients underwent thallium scan of the breast. After intravenous injection of 74-111 MBq(2-3 mCi)of thallium-201, anterior and lateral images were obtained. We compared thallium scans with pathological results. Of 11 patients with breast cancers, 10 cases (90.9%) were detected using thallium scan. Thallium scan obtained in one patient who had breast cancer but received several cycles of chemotherapy did not show thallium uptake. The smallest detectable cancer was 1.5 cm in diameter. In contrast, there is no thallium accumulation in breasts of 17 of 20 patients with benign disease (85%), Three cases of 13 fibrocystic disease show thallium uptake in their breast. In conclusion, thallium scan is an effective test in differentiating benign from malignant lesion.

  15. Willingness among Obese Pregnant Women to Accept MRI Scan

    DEFF Research Database (Denmark)

    Geiker, Nina Rica Wium; Thomsen, Henrik Segelcke; Astrup, Arne

    2015-01-01

    therefore undertook a study of the willingness of obese women to undergo MRI during pregnancy. Method: Obese pregnant women, body mass index (BMI) 30-45 kg/m2, participating in a weight management intervention study, were offered three MRI scans to be performed during pregnancy. One hundred and one women......Background/Aim: Magnetic resonance imaging (MRI) is considered safe to perform during pregnancy. In spite of this many women are reluctant to undergo the examination. Weight gain is to be expected during pregnancy, but little is known about changes in the compartmentalization of abdominal fat. We...... were offered MRI scanning in gestational week (GW) 15, 64 in GW 32, and 45 in GW 40. Results: Of 106 women offered MRI scans 102 completed (96%) at least one scan. In total 177 out of 210 possible scans were completed. The proportion of women who completed first, second and third MRI scans were 96%, 83...

  16. ROLE OF CT SCAN IN PARTIAL SEIZURES IN CHILDREN.

    Science.gov (United States)

    Kanitkar, M; Purkayastha, S B; Deshpande, N D

    1994-01-01

    50 consecutive cases of partial seizures hospitalised over a period of 2 years, were studied. CT Scans were done once at presentation and thereafter cases were followed up with repeat CT scans to evaluate treatment response wherever a treatable cause was found. CT scan diagnosis was correlated with clinical signs and other baseline investigations including an EEG. CT scan abnormality was detected in 66% cases. Single or multiple tuberculomas were noted in 24% cases, cortical atrophy in 14% cases, focal calcification in 10%, haemorrhage in 3% and subdural effusions in 2%. With positive clinical signs, 81% of CT scans were abnormal. 20% of patients with partial seizures having no clinical signs and normal base line investigations including an EEG, had a CT scan abnormality mainly a tuberculoma.

  17. Adaptive optics scanning ophthalmoscopy with annular pupils

    Science.gov (United States)

    Sulai, Yusufu N.; Dubra, Alfredo

    2012-01-01

    Annular apodization of the illumination and/or imaging pupils of an adaptive optics scanning light ophthalmoscope (AOSLO) for improving transverse resolution was evaluated using three different normalized inner radii (0.26, 0.39 and 0.52). In vivo imaging of the human photoreceptor mosaic at 0.5 and 10° from fixation indicates that the use of an annular illumination pupil and a circular imaging pupil provides the most benefit of all configurations when using a one Airy disk diameter pinhole, in agreement with the paraxial confocal microscopy theory. Annular illumination pupils with 0.26 and 0.39 normalized inner radii performed best in terms of the narrowing of the autocorrelation central lobe (between 7 and 12%), and the increase in manual and automated photoreceptor counts (8 to 20% more cones and 11 to 29% more rods). It was observed that the use of annular pupils with large inner radii can result in multi-modal cone photoreceptor intensity profiles. The effect of the annular masks on the average photoreceptor intensity is consistent with the Stiles-Crawford effect (SCE). This indicates that combinations of images of the same photoreceptors with different apodization configurations and/or annular masks can be used to distinguish cones from rods, even when the former have complex multi-modal intensity profiles. In addition to narrowing the point spread function transversally, the use of annular apodizing masks also elongates it axially, a fact that can be used for extending the depth of focus of techniques such as adaptive optics optical coherence tomography (AOOCT). Finally, the positive results from this work suggest that annular pupil apodization could be used in refractive or catadioptric adaptive optics ophthalmoscopes to mitigate undesired back-reflections. PMID:22808435

  18. Patterned retinal coagulation with a scanning laser

    Science.gov (United States)

    Palanker, Daniel; Jain, ATul; Paulus, Yannis; Andersen, Dan; Blumenkranz, Mark S.

    2007-02-01

    Pan-retinal photocoagulation in patients with diabetic retinopathy typically involves application of more than 1000 laser spots; often resulting in physician fatigue and patient discomfort. We present a semi-automated patterned scanning laser photocoagulator that rapidly applies predetermined patterns of lesions; thus, greatly improving the comfort, efficiency and precision of the treatment. Patterns selected from a graphical user interface are displayed on the retina with an aiming beam, and treatment can be initiated and interrupted by depressing a foot pedal. To deliver a significant number of burns during the eye's fixation time, each pulse should be considerably shorter than conventional 100ms pulse duration. We measured coagulation thresholds and studied clinical and histological outcomes of the application of laser pulses in the range of 1-200ms in pigmented rabbits. Laser power required for producing ophthalmoscopically visible lesions with a laser spot of 132μm decreased from 360 to 37mW with pulse durations increasing from 1 to 100ms. In the range of 10-100ms clinically and histologically equivalent light burns could be produced. The safe therapeutic range of coagulation (ratio of the laser power required to produce a rupture to that for a light burn) decreased with decreasing pulse duration: from 3.8 at 100ms, to 3.0 at 20ms, to 2.5 at 10ms, and to 1.1 at 1ms. Histology demonstrated increased confinement of the thermal damage with shorter pulses, with coagulation zone limited to the photoreceptor layer at pulses shorter than 10ms. Durations of 10-20ms appear to be a good compromise between the speed and safety of retinal coagulation. Rapid application of multiple lesions greatly improves the speed, precision, and reduces pain in retinal photocoagulation.

  19. Adaptive optics scanning ophthalmoscopy with annular pupils.

    Science.gov (United States)

    Sulai, Yusufu N; Dubra, Alfredo

    2012-07-01

    Annular apodization of the illumination and/or imaging pupils of an adaptive optics scanning light ophthalmoscope (AOSLO) for improving transverse resolution was evaluated using three different normalized inner radii (0.26, 0.39 and 0.52). In vivo imaging of the human photoreceptor mosaic at 0.5 and 10° from fixation indicates that the use of an annular illumination pupil and a circular imaging pupil provides the most benefit of all configurations when using a one Airy disk diameter pinhole, in agreement with the paraxial confocal microscopy theory. Annular illumination pupils with 0.26 and 0.39 normalized inner radii performed best in terms of the narrowing of the autocorrelation central lobe (between 7 and 12%), and the increase in manual and automated photoreceptor counts (8 to 20% more cones and 11 to 29% more rods). It was observed that the use of annular pupils with large inner radii can result in multi-modal cone photoreceptor intensity profiles. The effect of the annular masks on the average photoreceptor intensity is consistent with the Stiles-Crawford effect (SCE). This indicates that combinations of images of the same photoreceptors with different apodization configurations and/or annular masks can be used to distinguish cones from rods, even when the former have complex multi-modal intensity profiles. In addition to narrowing the point spread function transversally, the use of annular apodizing masks also elongates it axially, a fact that can be used for extending the depth of focus of techniques such as adaptive optics optical coherence tomography (AOOCT). Finally, the positive results from this work suggest that annular pupil apodization could be used in refractive or catadioptric adaptive optics ophthalmoscopes to mitigate undesired back-reflections.

  20. Vector sensor for scanning SQUID microscopy

    Science.gov (United States)

    Dang, Vu The; Toji, Masaki; Thanh Huy, Ho; Miyajima, Shigeyuki; Shishido, Hiroaki; Hidaka, Mutsuo; Hayashi, Masahiko; Ishida, Takekazu

    2017-07-01

    We plan to build a novel 3-dimensional (3D) scanning SQUID microscope with high sensitivity and high spatial resolution. In the system, a vector sensor consists of three SQUID sensors and three pick-up coils realized on a single chip. Three pick-up coils are configured in orthogonal with each other to measure the magnetic field vector of X, Y, Z components. We fabricated some SQUID chips with one uniaxial pick-up coil or three vector pick-up coils and carried out fundamental measurements to reveal the basic characteristics. Josephson junctions (JJs) of sensors are designed to have the critical current density J c of 320 A/cm2, and the critical current I c becomes 12.5 μA for the 2.2μm × 2.2μm JJ. We carefully positioned the three pickup coils so as to keep them at the same height at the centers of all three X, Y and Z coils. This can be done by arranging them along single line parallel to a sample surface. With the aid of multilayer technology of Nb-based fabrication, we attempted to reduce an inner diameter of the pickup coils to enhance both sensitivity and spatial resolution. The method for improving a spatial resolution of a local magnetic field image is to employ an XYZ piezo-driven scanner for controlling the positions of the pick-up coils. The fundamental characteristics of our SQUID sensors confirmed the proper operation of our SQUID sensors and found a good agreement with our design parameters.

  1. Low-temperature scanning tunneling spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, M.D.

    1989-01-01

    A scanning tunneling microscope (STM) was designed and built to operate at liquid helium temperature and was used to measure highly localized electron tunneling spectroscopy. Several instruments were built, all capable of operating in many different environments: air, vacuum, liquid helium and in a transfer gas. An adaptation of one particular design was made into an atomic force microscope capable of operating at low temperatures. Using a low temperature STM, three adsorbed molecular species (liquid crystals, sorbic acid, and carbon monoxide), deposited on a graphite substrate, have been imaged at 4.2K. The inelastic tunneling spectra of these adsorbates show strong peaks in dI/dV vs V curves at energies that correspond to known vibrational modes. The increase in conductance at the onset of inelastic tunneling was measured to be as high as 100 times. The spatial variation of the spectra was measured and was seen to change dramatically on the scale of angstroms, suggesting that individual molecular bonds could be measured. A theoretical model is presented to explain the contrast seen in the STM images of adsorbed molecules, thereby explaining why adsorbed molecules appear to be more conductive than the background. The microscope proved very useful for measuring the energy gap of high temperature superconductors. These materials often have submicron grain sizes. For LaSrCuO, YBaCuO, and BiCaSrCuO, the conductance curves showed a large energy gap suggesting a strongly coupled superconductor. The conductance curves also indicated that intergrain tunneling may occur and that the background conductance varied linearly with the applied voltage. The crystalline structure of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}} was imaged by an STM operating in air and in ultra-high vacuum.

  2. Scanned probe microscopy for thin film superconductor development

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, J. [National Institute of Standards and Technology, Boulder, CO (United States)

    1996-12-31

    Scanned probe microscopy is a general term encompassing the science of imaging based on piezoelectric driven probes for measuring local changes in nanoscale properties of materials and devices. Techniques like scanning tunneling microscopy, atomic force microscopy, and scanning potentiometry are becoming common tools in the production and development labs in the semiconductor industry. The author presents several examples of applications specific to the development of high temperature superconducting thin films and thin-film devices.

  3. Simulated SAM A-scans on multilayer MEMS components

    DEFF Research Database (Denmark)

    Janting, Jakob; Petersen, Dirch Hjorth; Greisen, Christoffer

    2002-01-01

    A spreadsheet program for simulation of Scanning Acoustic Microscopy (SAM) A-scans on multilayer structures has been developed. Using this program, structure variations in samples can be analysed better. Further samples can be prepared to get optimal signal for enhanced failure and materials anal....... The calculation of N, the program interface, and simulated A-scans on MEMS test structures for a pressure sensor are presented. (C) 2002 Elsevier Science Ltd. All rights reserved....

  4. SMEX03 Aircraft Polarimetric Scanning Radiometer (PSR) Data

    Data.gov (United States)

    National Aeronautics and Space Administration — The Polarimetric Scanning Radiometer (PSR) is an airborne microwave imaging radiometer developed and operated by the National Oceanic and Atmospheric Administration...

  5. SMEX02 Aircraft Polarimetric Scanning Radiometer (PSR) Data

    Data.gov (United States)

    National Aeronautics and Space Administration — The Polarimetric Scanning Radiometer (PSR) is an airborne microwave imaging radiometer developed and operated by the National Oceanic and Atmospheric Administration...

  6. Innovative advanced occlusion planning with superimposed CT and optical scans.

    Science.gov (United States)

    Tremblay, Gilbert

    2011-04-01

    In order to increase the likelihood of a successful treatment plan outcome, it is critical to be able to effectively view the patient's underlying bony skeletal relationship of his or her TMJ. An innovative approach suggested to achieve this is to use the CT scan, optical scan, and Kois deprogrammer. Once the vertical dimension has been increased, the novelty of this approach is the ability to superimpose both scans along with the Kois deprogrammer and, using computer software, evaluate the TMJ position in three dimensions. This case presentation describes how TMJ CT scan evaluation is used in planning a complex rehabilitation case, given that the occlusion structures can be visualized independently and interactively.

  7. Bone marrow scan evaluation of arthropathy in sickle cell disorders

    Energy Technology Data Exchange (ETDEWEB)

    Alavi, A.; Schumacher, H.R.; Dorwart, B.; Kuhl, D.E.

    1976-04-01

    Twelve patients with sickle cell hemoglobinopathies and arthropathy were studied, using technetium Tc 99m sulfur colloid bone marrow scans. Eight of 12 had decreased marrow radionuclide activity adjacent to painful joints, suggesting obliteration of vessels supplying bone marrow. Four patients without marrow defects on scanning had causes other than infarction for their joint symptoms, viz, small fractures, postinfectious synovitis, degenerative arthritis, and osteochondromas. Roentgenograms never showed bony abnormalities in five patients with marrow infarctions, and, in three others, showed defects several months later than did the marrow scans. Bone marrow scans offer a sensitive and early diagnostic aid in sickle cell hemoglobinopathies with arthropathy.

  8. Space Shuttle Orbiter Digital Outer Mold Line Scanning

    Science.gov (United States)

    Campbell, Charles H.; Wilson, Brad; Pavek, Mike; Berger, Karen

    2012-01-01

    The Space Shuttle Orbiters Discovery and Endeavor have been digitally scanned to produce post-flight configuration outer mold line surfaces. Very detailed scans of the windward side of these vehicles provide resolution of the detailed tile step and gap geometry, as well as the reinforced carbon carbon nose cap and leading edges. Lower resolution scans of the upper surface provide definition of the crew cabin windows, wing upper surfaces, payload bay doors, orbital maneuvering system pods and the vertical tail. The process for acquisition of these digital scans as well as post-processing of the very large data set will be described.

  9. ISBN and QR Barcode Scanning Mobile App for Libraries

    OpenAIRE

    Graham McCarthy; Sally Wilson

    2011-01-01

    This article outlines the development of a mobile application for the Ryerson University Library. The application provides for ISBN barcode scanning that results in a lookup of library copies and services for the book scanned, as well as QR code scanning. Two versions of the application were developed, one for iOS and one for Android. The article includes some details on the free packages used for barcode scanning functionality. Source code for the Ryerson iOS and Android applications are fre...

  10. Design of Test Wrapper Scan Chain Based on Differential Evolution

    Directory of Open Access Journals (Sweden)

    Aijun Zhu

    2013-08-01

    Full Text Available Integrated Circuit has entered the era of design of the IP-based SoC (System on Chip, which makes the IP core reuse become a key issue. SoC test wrapper design for scan chain is a NP Hard problem, we propose an algorithm based on Differential Evolution (DE to design wrapper scan chain. Through group’s mutation, crossover and selection operations, the design of test wrapper scan chain is achieved. Experimental verification is carried out according to the international standard benchmark ITC’02. The results show that the algorithm can obtain shorter longest wrapper scan chains, compared with other algorithms.

  11. Composite single crystal silicon scan mirror substrates Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Single crystal silicon is a desirable mirror substrate for scan mirrors in space telescopes. As diameters of mirrors become larger, existing manufacturing...

  12. Radar Scan Methods in Modern Multifunctional Radars

    Directory of Open Access Journals (Sweden)

    V. N. Skosyrev

    2014-01-01

    overview in elevation plane ray beam with high directivity and electronic scanning. This method is preferable from the viewpoint of the anti-jamming passive and active interference, as well as reducing electromagnetic visibility.

  13. The HEAO-1 Scanning Modulation Collimator

    Science.gov (United States)

    Schwartz, Daniel A.

    2013-01-01

    My niche on this panel seems to be the High Energy Astronomy Observatory-1 Scanning Modulation Collimator experiment. Our chair, Hale Bradt, and the late Herb Gursky each proposed a different version modulation collimator, which was condensed by NASA via "forced marriage," to the SMC. I worked as Project Scientist under Herb, later inheriting the PI role. The MIT Project Scientist, the late Rodger Doxsey, and I were told "this is your experiment," and "we are a seamless team regardless of institution." Rodger and I were young enough to believe this, and we made it happen (and not always with the best results vis a vis higher internal management). I was never interested in astronomy, and allegedly am still not. Why do an astro-metrical job of measuring and reporting the coordinates of X-ray sources? In fact we participated widely in the identification of the sources with astronomical object, and making each paper a discussion of the physics of the emission. An enjoyable way to learn some astronomy. The stated purpose of the Gursky/Bradt experiment was to enable optical identifications so that more detailed study could be done. I remember meeting with John Whelan to discuss his collaboration in making the optical identifications. He said he only wanted to study sources after they were identified. For many milliseconds I became very angry - "who is going to to the work to MAKE those identifications," but luckily before speaking I realized how satisfying it was that astronomers indeed wanted to study X-ray sources in other wavebands. The second biggest excitement in the HEAO-1 program was the "glitches" that appeared in the gyro data during final functional testing. This took some high-powered politics by all the PI's to convince MSFC to delay for 4 months, replacing the "funny" unit with one from HEAO-2 (Einstein) and later refurbishing that unit. Third biggest excitement was when a computer failed and final checkout during countdown at the Cape was done by looking at

  14. New Designs for NMR Core Scanning

    Science.gov (United States)

    Bluemich, B.; Anferova, S.; Talnishnikh, E.; Arnold, J.; Clauser, C.

    2006-12-01

    Within the last ten years, mobile magnetic resonance has moved from the oil field to many new areas of application. While the focus of mobile NMR in the past was on single-sided or inside-out NMR, the advent of tube-shaped Halbach magnets has introduced the conventional outside-in NMR concept to mobile NMR where the object is inside a magnet. Our Halbach magnet is constructed from small magnet blocks at light weight and low cost with a magnetic field sufficiently homogeneous. To automatize NMR measurements, the Halbach magnet is mounted on a sliding table to scan long core sections without human interaction. In homogeneous magnetic fields, the longitudinal relaxation time T1 and even the transverse relaxation time T2 are proportional to the pore diameters of rocks. Hence, the T1 and T2 signals map the pore-size distribution of the studied rock cores. For fully saturated samples the integral of the distribution curve is proportional to porosity. The porosity values from NMR measurements with the Halbach magnet are used to estimate permability. The Halbach magnet can be used for certain sample geometries in combination with exchangeable radio frequency (rf) coils with different diameters from 24 mm up to 80 mm. To measure standard Ocean Drilling Program (ODP)/Integrated Ocean Drilling Program (IODP) cores, which have a standard diameter of 60 mm and are split lengthwise after recovery, we use a surface figure-8 rf coil with an inner diameter of 60 mm. Besides 1D T2 measurements, we perform relaxation-relaxation correlation experiments, where T1 and T2 are measured in parallel. In this way, the influence of diffusion on the shape of the T2 distribution function is probed. A gradient coil system was designed to perform Pulsed Field Gradients (PFG) experiments. As the gradient coils restrict the axial access to the magnet, only cylindrical core plugs with 20 mm in diameter can be analysed by PFG NMR methods. The homogeneity of the magnetic field in the sensitive volume

  15. Applying Terrestrial Laser Scanning for Soil Surface Roughness Assessment

    Directory of Open Access Journals (Sweden)

    Milutin Milenković

    2015-02-01

    Full Text Available Terrestrial laser scanning can provide high-resolution, two-dimensional sampling of soil surface roughness. While previous studies demonstrated the usefulness of these roughness measurements in geophysical applications, questions about the number of required scans and their resolution were not investigated thoroughly. Here, we suggest a method to generate digital elevation models, while preserving the surface’s stochastic properties at high frequencies and additionally providing an estimate of their spatial resolution. We also study the impact of the number and positions of scans on roughness indices’ estimates. An experiment over a smooth and isotropic soil plot accompanies the analysis, where scanning results are compared to results from active triangulation. The roughness measurement conditions for ideal sampling are revisited and updated for diffraction-limited sampling valid for close-range laser scanning over smooth and isotropic soil roughness. Our results show that terrestrial laser scanning can be readily used for roughness assessment on scales larger than 5 cm, while for smaller scales, special processing is required to mitigate the effect of the laser beam footprint. Interestingly, classical roughness parametrization (correlation length, root mean square height (RMSh was not sensitive to these effects. Furthermore, comparing the classical roughness parametrization between one- and four-scan setups shows that the one-scan data can replace the four-scan setup with a relative loss of accuracy below 1% for ranges up to 3 m and incidence angles no larger than 50°, while two opposite scans can replace it over the whole plot. The incidence angle limit for the spectral slope is even stronger and is 40°. These findings are valid for scanning over smooth and isotropic soil roughness.

  16. EDITORIAL: Scanning probe microscopy: a visionary development Scanning probe microscopy: a visionary development

    Science.gov (United States)

    Demming, Anna

    2013-07-01

    The development of scanning probe microscopy repositioned modern physics. When Rohrer and Binnig first used electronic tunnelling effects to image atoms and quantum states they did more than pin down theoretical hypotheses to real-world observables; the scanning tunnelling microscope fed imaginations, prompting researchers to consider new directions and possibilities [1]. As Rohrer once commented, 'We could show that you can easily manipulate or position something small in space with an accuracy of 10 pm.... When you can do that, you simply have ideas of what you can do' [2]. The development heralded a cavalry of scanning probe techniques—such as atomic force microscopy (AFM) [3-5], scanning near-field optical microscopy (SNOM) [6-8] and Kelvin probe force microscopy (KPFM) [9, 10]—that still continue to bring nanomaterials and nanoscale phenomena into fresh focus. Not long after the development of scanning tunnelling microscopy, Binnig, Quate and Gerber collaborating in California in the US published work on a new type of microscope also capable of atomic level resolution [3]. The original concept behind scanning tunnelling microscopy uses electrical conductance, which places substantial limitations on the systems that it can image. Binnig, Quate and Gerber developed the AFM to 'feel' the topology of surfaces like the needle of an old fashioned vinyl player. In this way insulators could be imaged as well. The development of a force modulation mode AFM extended the tool's reach to soft materials making images of biological samples accessible with the technique [4]. There have now been a number of demonstrations of image capture at rates that allow dynamics at the nanoscale to be tracked in real time, opening further possibilities in applications of the AFM as described in a recent review by Toshio Ando at Kanazawa University [5]. Researchers also found a way to retrieve optical information at 'super-resolution' [6, 7]. Optical microscopy provides spectral

  17. Terrestrial radar and laser scanning for deformation monitoring: first steps towards assisted radar scanning

    Directory of Open Access Journals (Sweden)

    D. Wujanz

    2013-10-01

    Full Text Available Deformation analysis based on multi-temporal Terrestrial Laser Scanning (TLS surveys has been applied for many years in commercial and academic problem domains. Downsides of this technique are the sequential data acquisition as well as its limited accuracy compared to terrestrial InSAR or InRAR based technologies that are currently gaining attention of the geodetic community. A drawback of these instruments is its relative operation method while beneficially measurements within the entire field of view can be carried out simultaneously at high frequencies. At first comparative studies between TLS and InRAR scanning are presented which have been carried out at a quarry. Over the course of roughly two hours six epochs have been measured where geometric changes of different degrees have been purposely made. In order to ensure comparability concerning the outcome, both instrument coordinate systems have been transformed into a common coordinate system by applying corner cube reflectors. At last an assisted ground based RADAR approach is presented where advantages of both applied techniques are incorporated.

  18. Scanning tunneling microscopy III theory of STM and related scanning probe methods

    CERN Document Server

    Güntherodt, Hans-Joachim

    1993-01-01

    While the first two volumes on Scanning Tunneling Microscopy (STM) and its related scanning probe (SXM) methods have mainly concentrated on intro­ ducing the experimental techniques, as well as their various applications in different research fields, this third volume is exclusively devoted to the theory of STM and related SXM methods. As the experimental techniques including the reproducibility of the experimental results have advanced, more and more theorists have become attracted to focus on issues related to STM and SXM. The increasing effort in the development of theoretical concepts for STM/SXM has led to considerable improvements in understanding the contrast mechanism as well as the experimental conditions necessary to obtain reliable data. Therefore, this third volume on STM/SXM is not written by theorists for theorists, but rather for every scientist who is not satisfied by just obtaining real­ space images of surface structures by STM/SXM. After a brief introduction (Chap. 1), N. D. Lang first co...

  19. ORIGINAL ARTICLES FAST scanning in the developing world ...

    African Journals Online (AJOL)

    for 22 peripheral hospitals covering north-eastern KZN as far as 300 km ... most rural settings in South Africa CT scanning and radiology ... FAST scans may assist in the appropriate timely transfer of trauma patients for further imaging or definitive surgical intervention. S Afr Med J 2010; 100: 105-108. February 2010, Vol. 100 ...

  20. Evaluation of 3-D laser scanning equipment : 2016 interim report.

    Science.gov (United States)

    2017-05-01

    As a follow-up to ICT Project R27-030, Evaluation of 3-D Laser Scanning, this report provides findings of an evaluation of 3-D laser : scanning equipment to determine the tangible costs versus benefits and the manpower savings realized by using the e...