Behavior problems of children in foster care: Associations with foster mothers' representations, commitment, and the quality of mother-child interaction.

Science.gov (United States)

Dubois-Comtois, Karine; Bernier, Annie; Tarabulsy, George M; Cyr, Chantal; St-Laurent, Diane; Lanctôt, Anne-Sophie; St-Onge, Janie; Moss, Ellen; Béliveau, Marie-Julie

2015-10-01

This study investigated different environmental and contextual factors associated with maltreated children's adjustment in foster care. Participants included 83 children (52 boys), ages 1-7 years, and their foster caregivers. Quality of interaction with the foster caregiver was assessed from direct observation of a free-play situation; foster caregiver attachment state of mind and commitment toward the child were assessed using two interviews; disruptive behavior symptoms were reported by foster caregivers. Results showed that quality of interaction between foster caregivers and children were associated with behavior problems, such that higher-quality interactions were related to fewer externalizing and internalizing problems. Foster caregivers' state of mind and commitment were interrelated but not directly associated with behavior problems of foster children. Type of placement moderated the association between foster caregiver commitment and foster child behavior problems. Whereas greater foster caregiver commitment was associated with higher levels of adjustment for children in foster families (kin and non-kin), this was not the case in foster-to-adopt families. Finally, the associations between foster child behavior problems and history of maltreatment and placement related-risk conditions fell below significance after considering child age and quality of interaction with the foster caregiver. Findings underscore the crucial contribution of the foster caregiver-child relationship to fostering child adjustment and, thereby, have important implications for clinical services offered to this population. Copyright © 2015 Elsevier Ltd. All rights reserved.

Investigation And Mitigation Techniques Of Power Quality Problems In Nuclear Installations

International Nuclear Information System (INIS)

Ayad, N.; Elsherbiny, E.; Eleissawi, H.; Zaher, M.; AbdelSalam, G.

2013-01-01

The electrical power systems are exposed to different types of power quality disturbances problems. Investigation and monitoring of power quality is necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. The present research discusses investigation and monitoring of power quality problems for the electrical sources of nuclear installations. Field power quality data is collected by power analyzer and analyzed with reference to power quality standards. There were several disturbances exceeded the thresholds, they were voltage harmonics and voltage flicker. Mitigation techniques were suggested to install a passive filter at low voltage side and all sensitive and critical loads should be isolated and fed through uninterruptible power supply (UPS)

The quality of life of adolescents with menstrual problems.

Science.gov (United States)

Nur Azurah, Abdul Ghani; Sanci, Lena; Moore, Elya; Grover, Sonia

2013-04-01

To date, very few publications have examined the health related quality of life (HRQL) in the younger population with menstrual problems, despite their high prevalence in adolescent girls. We describe the health-related quality of life (HRQL) among adolescents with menstrual problems and identified factors that have an impact on it. The study was a questionnaire study (using PedsQL 4.0) of adolescents aged 13-18 referred to a tertiary gynecology center for menstrual problems between June 2009 and August 2010. One hundred eighty-four adolescents completed the questionnaires. The mean age was 15.10 ± 1.49 with the mean body mass index (BMI) of 22.83 ± 4.82 kg/m(2). The most common menstrual problems seen in the clinic were dysmenorrhea (38.6%) followed by heavy bleeding (33.6%), oligomenorrhea (19.6%), and amenorrhea (8.2%). The mean overall score was 70.40 ± 16.36 with 42.3% having a score below 1 standard deviation (SD) from the norms. Adolescents with dysmenorrhea had the poorest score in physical function, whereas those with amenorrhea had the lowest score in psychosocial function. Maternal parenting style, parental anxiety, adolescents' ill-health behavior, and BMI have been found to have impact on the girls' quality of life (QoL). Although menstrual problems are not life threatening, they can pose a significant impact on the quality of life of these patients. Identification of these impacts might lead to the recognition of potential services or education to improve this. Understanding the characteristics that predict QoL may help a clinician identify patients who are risk for poor QoL. Copyright © 2013 North American Society for Pediatric and Adolescent Gynecology. All rights reserved.

Benchmarking strategies for measuring the quality of healthcare: problems and prospects.

Science.gov (United States)

Lovaglio, Pietro Giorgio

2012-01-01

Over the last few years, increasing attention has been directed toward the problems inherent to measuring the quality of healthcare and implementing benchmarking strategies. Besides offering accreditation and certification processes, recent approaches measure the performance of healthcare institutions in order to evaluate their effectiveness, defined as the capacity to provide treatment that modifies and improves the patient's state of health. This paper, dealing with hospital effectiveness, focuses on research methods for effectiveness analyses within a strategy comparing different healthcare institutions. The paper, after having introduced readers to the principle debates on benchmarking strategies, which depend on the perspective and type of indicators used, focuses on the methodological problems related to performing consistent benchmarking analyses. Particularly, statistical methods suitable for controlling case-mix, analyzing aggregate data, rare events, and continuous outcomes measured with error are examined. Specific challenges of benchmarking strategies, such as the risk of risk adjustment (case-mix fallacy, underreporting, risk of comparing noncomparable hospitals), selection bias, and possible strategies for the development of consistent benchmarking analyses, are discussed. Finally, to demonstrate the feasibility of the illustrated benchmarking strategies, an application focused on determining regional benchmarks for patient satisfaction (using 2009 Lombardy Region Patient Satisfaction Questionnaire) is proposed.

Problem of quality assurance during metal constructions welding via robotic technological complexes

Science.gov (United States)

Fominykh, D. S.; Rezchikov, A. F.; Kushnikov, V. A.; Ivashchenko, V. A.; Bogomolov, A. S.; Filimonyuk, L. Yu; Dolinina, O. N.; Kushnikov, O. V.; Shulga, T. E.; Tverdokhlebov, V. A.

2018-05-01

The problem of minimizing the probability for critical combinations of events that lead to a loss in welding quality via robotic process automation is examined. The problem is formulated, models and algorithms for its solution are developed. The problem is solved by minimizing the criterion characterizing the losses caused by defective products. Solving the problem may enhance the quality and accuracy of operations performed and reduce the losses caused by defective product

Citrus Quality Control: An NMR/MRI Problem-Based Experiment

Science.gov (United States)

Erhart, Sarah E.; McCarrick, Robert M.; Lorigan, Gary A.; Yezierski, Ellen J.

2016-01-01

An experiment seated in an industrial context can provide an engaging framework and unique learning opportunity for an upper-division physical chemistry laboratory. An experiment that teaches NMR/MRI through a problem-based quality control of citrus products was developed. In this experiment, using a problem-based learning (PBL) approach, students…

Quality assurance methods and procedures for accepting radioactive waste for final storage

International Nuclear Information System (INIS)

Wenger, R.

1992-01-01

The concept of quality assurance for the final storage of radioactive materials is presented together with the procedure, characterisation, procedural development and documentation involved. Other topics include the assessment of the material to find its suitability for final storage and the tests for transport. 4 figs., 9 refs

Identification and simulation of the power quality problems using computer models

International Nuclear Information System (INIS)

Abro, M.R.; Memon, A.P.; Memon, Z.A.

2005-01-01

The Power Quality has become the main factor in our life. If this quality of power is being polluted over the Electrical Power Network, serious problems could arise within the modem social structure and its conveniences. The Nonlinear Characteristics of various office and Industrial equipment connected to the power grid could cause electrical disturbances to poor power quality. In many cases the electric power consumed is first converted to different form and such conversion process introduces harmonic pollution in the grid. These electrical disturbances could destroy certain sensitive equipment connected to the grid or in some cases could cause them to malfunction. In the huge power network identifying the source of such disturbance without causing interruption to the supply is a big problem. This paper attempts to study the power quality problem caused by typical loads using computer models paving the way to identify the source of the problem. PSB (Power System Blockset) Toolbox of MATLAB is used for this paper, which is designed to provide modem tool that rapidly and easily builds models and simulates the power system. The blockset uses the Simulink environment, allowing a model to be built using simple click and drag procedures. (author)

Quality control in diagnostic mammography: myths, realities and their importance in the final image quality

International Nuclear Information System (INIS)

Mora Rodriguez, Patricia

2011-01-01

Mammography is the most used tool for early detection of breast cancer and reduce mortality from this cause. Studies with ionizing radiation it is important that be justified and provide a quality image to make the diagnosis, to get more benefits and fewer risks. The problem is the difficult to obtain an image of the breast. Therefore, the commitment to quality mammography is to maximize the contrast, definition, resolution and reliability, thus minimizing noise and dose. A mammogram performed without quality don't detect early breast cancer and the study doesn't have sense. Quality mammography requires trained and experienced staff, modern equipment and in good conditions, correct positioning, right technical factors and appropriate viewing conditions. In addition, quality programs are required to reach to ensure quality, control in testing techniques and image quality. (author) [es

Benchmarking Strategies for Measuring the Quality of Healthcare: Problems and Prospects

Science.gov (United States)

Lovaglio, Pietro Giorgio

2012-01-01

Over the last few years, increasing attention has been directed toward the problems inherent to measuring the quality of healthcare and implementing benchmarking strategies. Besides offering accreditation and certification processes, recent approaches measure the performance of healthcare institutions in order to evaluate their effectiveness, defined as the capacity to provide treatment that modifies and improves the patient's state of health. This paper, dealing with hospital effectiveness, focuses on research methods for effectiveness analyses within a strategy comparing different healthcare institutions. The paper, after having introduced readers to the principle debates on benchmarking strategies, which depend on the perspective and type of indicators used, focuses on the methodological problems related to performing consistent benchmarking analyses. Particularly, statistical methods suitable for controlling case-mix, analyzing aggregate data, rare events, and continuous outcomes measured with error are examined. Specific challenges of benchmarking strategies, such as the risk of risk adjustment (case-mix fallacy, underreporting, risk of comparing noncomparable hospitals), selection bias, and possible strategies for the development of consistent benchmarking analyses, are discussed. Finally, to demonstrate the feasibility of the illustrated benchmarking strategies, an application focused on determining regional benchmarks for patient satisfaction (using 2009 Lombardy Region Patient Satisfaction Questionnaire) is proposed. PMID:22666140

Teaching Mathematical Word Problem Solving: The Quality of Evidence for Strategy Instruction Priming the Problem Structure

Science.gov (United States)

Jitendra, Asha K.; Petersen-Brown, Shawna; Lein, Amy E.; Zaslofsky, Anne F.; Kunkel, Amy K.; Jung, Pyung-Gang; Egan, Andrea M.

2015-01-01

This study examined the quality of the research base related to strategy instruction priming the underlying mathematical problem structure for students with learning disabilities and those at risk for mathematics difficulties. We evaluated the quality of methodological rigor of 18 group research studies using the criteria proposed by Gersten et…

Teaching mathematical word problem solving: the quality of evidence for strategy instruction priming the problem structure.

Science.gov (United States)

Jitendra, Asha K; Petersen-Brown, Shawna; Lein, Amy E; Zaslofsky, Anne F; Kunkel, Amy K; Jung, Pyung-Gang; Egan, Andrea M

2015-01-01

This study examined the quality of the research base related to strategy instruction priming the underlying mathematical problem structure for students with learning disabilities and those at risk for mathematics difficulties. We evaluated the quality of methodological rigor of 18 group research studies using the criteria proposed by Gersten et al. and 10 single case design (SCD) research studies using criteria suggested by Horner et al. and the What Works Clearinghouse. Results indicated that 14 group design studies met the criteria for high-quality or acceptable research, whereas SCD studies did not meet the standards for an evidence-based practice. Based on these findings, strategy instruction priming the mathematics problem structure is considered an evidence-based practice using only group design methodological criteria. Implications for future research and for practice are discussed. © Hammill Institute on Disabilities 2013.

Longitudinal effects of sibling relationship quality on adolescent problem behavior: a cross-ethnic comparison.

Science.gov (United States)

Buist, Kirsten L; Paalman, Carmen H; Branje, Susan J T; Deković, Maja; Reitz, Ellen; Verhoeven, Marjolein; Meeus, Wim H J; Koot, Hans M; Hale, William W

2014-04-01

The aim of the present study was to examine whether adolescents of Moroccan and Dutch origin differ concerning sibling relationship quality and to examine whether the associations between quality of the sibling relationship and level and change in externalizing and internalizing problem behavior are comparable for Moroccan and Dutch adolescents. Five annual waves of questionnaire data on sibling support and conflict as well as externalizing problems, anxiety and depression were collected from 159 ethnic Moroccan adolescents (Mage = 13.3 years) and from 159 ethnic Dutch adolescents (Mage = 13.0 years). Our findings demonstrated significant mean level differences between the Moroccan and Dutch sample in sibling relationship quality, externalizing problems, and depression, with Moroccan adolescents reporting higher sibling relationship quality and less problem behavior. However, effects of sibling relationship quality on externalizing problems, anxiety, and depression were similar for the Moroccan and Dutch samples. Sibling support was not related to level of externalizing problems, nor to changes in externalizing problems, anxiety, and depression. Additionally, more sibling conflict was related to a higher starting level of and faster decreases in problem behaviors. Our results support the ethnic equivalence model, which holds that the influence of family relationships is similar for different ethnic groups. Moreover, sibling support and conflict affect both the level and the fluctuations in problem behavior over time in specific ethnic groups similarly. Implications for future studies and interventions are subsequently discussed.

California Air Quality State Implementation Plans; Final Approval; Butte County Air Quality Management District; Stationary Source Permits

Science.gov (United States)

EPA is taking final action to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California State Implementation Plan (SIP). This revision concerns the District's New Source Review (NSR) permitting program.

Relationships between undergraduates' argumentation skills, conceptual quality of problem solutions, and problem solving strategies in introductory physics

Science.gov (United States)

Rebello, Carina M.

This study explored the effects of alternative forms of argumentation on undergraduates' physics solutions in introductory calculus-based physics. A two-phase concurrent mixed methods design was employed to investigate relationships between undergraduates' written argumentation abilities, conceptual quality of problem solutions, as well as approaches and strategies for solving argumentative physics problems across multiple physics topics. Participants were assigned via stratified sampling to one of three conditions (control, guided construct, or guided evaluate) based on gender and pre-test scores on a conceptual instrument. The guided construct and guided evaluate groups received tasks and prompts drawn from literature to facilitate argument construction or evaluation. Using a multiple case study design, with each condition serving as a case, interviews were conducted consisting of a think-aloud problem solving session paired with a semi-structured interview. The analysis of problem solving strategies was guided by the theoretical framework on epistemic games adapted by Tuminaro and Redish (2007). This study provides empirical evidence that integration of written argumentation into physics problems can potentially improve the conceptual quality of solutions, expand their repertoire of problem solving strategies and show promise for addressing the gender gap in physics. The study suggests further avenues for research in this area and implications for designing and implementing argumentation tasks in introductory college physics.

HACCP-based quality risk management approach to udder health problems on dairy farms.

Science.gov (United States)

Noordhuizen, Jptm; Cannas da Silva, J

2009-04-01

Against the background of prevailing udder health problems on dairy farms, this paper discusses a new approach to mastitis control. Current udder health control programmes, such as the 'five-point plan', are highlighted and their drawbacks indicated. The concept and principles of hazard analysis critical control points (HACCP) are introduced. The eight core elements of this concept are dealt with by using the example of a dairy herd with a mastitis problem due to Staphylococcus aureus. The various steps to be taken in the development of a HACCP-based quality risk management programme are illustrated through the application of core elements. Finally, it is shown that the HACCP key words, structure, organisation, planning, communication and formalisation; which do not frequently appear in conventional herd health and production management programmes can contribute to better udder health. The role of the veterinarian can be paramount and of added value, if he/she is willing to invest in new knowledge and skills, such as the HACCP concept, farm economics, animal nutrition, and particularly the role of coach to the dairy farmer in the implementation of preventative measures in relation to udder health.

HACCP-based quality risk management approach to udder health problems on dairy farms

Directory of Open Access Journals (Sweden)

Noordhuizen JPTM

2009-04-01

Full Text Available Abstract Against the background of prevailing udder health problems on dairy farms, this paper discusses a new approach to mastitis control. Current udder health control programmes, such as the 'five-point plan', are highlighted and their drawbacks indicated. The concept and principles of hazard analysis critical control points (HACCP are introduced. The eight core elements of this concept are dealt with by using the example of a dairy herd with a mastitis problem due to Staphylococcus aureus. The various steps to be taken in the development of a HACCP-based quality risk management programme are illustrated through the application of core elements. Finally, it is shown that the HACCP key words, structure, organisation, planning, communication and formalisation; which do not frequently appear in conventional herd health and production management programmes can contribute to better udder health. The role of the veterinarian can be paramount and of added value, if he/she is willing to invest in new knowledge and skills, such as the HACCP concept, farm economics, animal nutrition, and particularly the role of coach to the dairy farmer in the implementation of preventative measures in relation to udder health.

Coping and social problem solving correlates of asthma control and quality of life.

Science.gov (United States)

McCormick, Sean P; Nezu, Christine M; Nezu, Arthur M; Sherman, Michael; Davey, Adam; Collins, Bradley N

2014-02-01

In a sample of adults with asthma receiving care and medication in an outpatient pulmonary clinic, this study tested for statistical associations between social problem-solving styles, asthma control, and asthma-related quality of life. These variables were measured cross sectionally as a first step toward more systematic application of social problem-solving frameworks in asthma self-management training. Recruitment occurred during pulmonology clinic service hours. Forty-four adults with physician-confirmed diagnosis of asthma provided data including age, gender, height, weight, race, income, and comorbid conditions. The Asthma Control Questionnaire, the Mini Asthma Quality of Life Questionnaire (Short Form), and peak expiratory force measures offered multiple views of asthma health at the time of the study. Maladaptive coping (impulsive and careless problem-solving styles) based on transactional stress models of health were assessed with the Social Problem-Solving Inventory-Revised: Short Form. Controlling for variance associated with gender, age, and income, individuals reporting higher impulsive-careless scores exhibited significantly lower scores on asthma control (β = 0.70, p = 0.001, confidence interval (CI) [0.37-1.04]) and lower asthma-related quality of life (β = 0.79, p = 0.017, CI [0.15-1.42]). These findings suggest that specific maladaptive problem-solving styles may uniquely contribute to asthma health burdens. Because problem-solving coping strategies are both measureable and teachable, behavioral interventions aimed at facilitating adaptive coping and problem solving could positively affect patient's asthma management and quality of life.

The 'final order' problem

NARCIS (Netherlands)

Teunter, RH; Haneveld, WKK

1998-01-01

When the service department of a company selling machines stops producing and supplying spare parts for certain machines, customers are offered an opportunity to place a so-called final order for these spare parts. We focus on one customer with one machine. The customer plans to use this machine up

Internalizing Problems among Cyberbullying Victims and Moderator Effects of Friendship Quality

Science.gov (United States)

Aoyama, Ikuko; Saxon, Terrill F.; Fearon, Danielle D.

2011-01-01

Purpose: The purpose of this paper is to examine the relationship between cyberbullying victimization and internalizing problems among the youth. Moderator effects of a friendship quality were also investigated to examine if higher friendship quality moderated the negative effects of cyberbullying on psychological states of students.…

Assessment and mitigation of power quality problems for PUSPATI TRIGA Reactor (RTP)

Science.gov (United States)

Zakaria, Mohd Fazli; Ramachandaramurthy, Vigna K.

2017-01-01

An electrical power systems are exposed to different types of power quality disturbances. Investigation and monitoring of power quality are necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. This paper will discuss the power quality problems observed at the electrical sources of PUSPATI TRIGA Reactor (RTP). Assessment of power quality requires the identification of any anomalous behavior on a power system, which adversely affects the normal operation of electrical or electronic equipment. A power quality assessment involves gathering data resources; analyzing the data (with reference to power quality standards) then, if problems exist, recommendation of mitigation techniques must be considered. Field power quality data is collected by power quality recorder and analyzed with reference to power quality standards. Normally the electrical power is supplied to the RTP via two sources in order to keep a good reliability where each of them is designed to carry the full load. The assessment of power quality during reactor operation was performed for both electrical sources. There were several disturbances such as voltage harmonics and flicker that exceeded the thresholds. To reduce these disturbances, mitigation techniques have been proposed, such as to install passive harmonic filters to reduce harmonic distortion, dynamic voltage restorer (DVR) to reduce voltage disturbances and isolate all sensitive and critical loads.

Sleep quality and sleep associated problems in female pharmacy students

Directory of Open Access Journals (Sweden)

Vivek Jain

2013-01-01

Full Text Available Background: Sleep is an essential element for adolescent mental and physical growth and development, but today′s young adolescents are deprived of this. Earlier studies in Europe and America showed pitiable sleep quality of young college students, which affect their academic growth. However, as per our literature search there is a lack of such studies in Indian context especially, within pharmacy education. Objective: The present study was designed to investigate the interrelation between the demographic characteristics, life-style, and academic progress with sleep quality and sleep problems along with daytime and nighttime habits in young female pharmacy students of India. Materials and Methods: Questionnaire on sleep and daytime habits (QS and DH was prepared. Our sample survey consists of 226 female pharmacy students of Banasthali University. QS and DH of multiple choice type, covered demographic characteristic (3 questions sleep and daytime habits (25 questions, life-style and academic progress (3 questions, and one question of course curriculum. Parameters were co-related by point scale method using the SPSS 16.0 software. Results: Data derived and analyze from survey illustrated that quality of sleep was as: Excellent - 20.4%, good - 38.5%, satisfactory - 35.8%, poor - 4%, and very poor - 1.3% of participants. Living condition (ρ=0.168, P =0.011, academic progress (ρ=0.151, P=0.023, leisure activity (ρ=0.133, P<0.05, and daytime naps (ρ=0.160, P=0.016 were significantly correlated with sleep quality. In addition, daytime sleepiness caused a significant problem for students and created a number of sleep disorders. Nevertheless, Sleep quality was not associated with age, body mass index, and coffee in the late evening. Conclusion: Study reported that sleep associated problems were common complaints in female pharmacy students.

Identifying Problems in Students’ Final Projects Based on Scientific Writing Guidelines

Directory of Open Access Journals (Sweden)

Endang Ernawati

2010-11-01

Full Text Available Article analyzed student’s difficulties and abilities in writing their final projects, which were undergraduate theses and undergraduate paper conducted by some students at the English Department, Bina Nusantara University. This was a preliminary study to support an appropriate student guideline in writing their final project. The study was conducted by applying qualitative methods that was by analyzing the four theses and one paper in terms of their format: titles, introduction, theoretical background, analysis, conclusion, bibliography, and paper rubric to analyze the contents. It can be concluded that generally, students, guided by their mentor/lecturer, understand the final paper guidelines and they are able to apply it in their thesis and paper. But, there are still lack of clarity and relevancy in expressing their ideas properly, and their ability in writing in both English and Bahasa Indonesia must be improved. These problems can be overcome by socializing the writing guidelines to both students and lecturers, providing them with critical thinking skills, cooperation with library that will guide them in information literacy skills, and language center that will improve their writing skills. 

Exploring the relationship between quality of life and mental health problems in children: implications for measurement and practice.

Science.gov (United States)

Sharpe, Helen; Patalay, Praveetha; Fink, Elian; Vostanis, Panos; Deighton, Jessica; Wolpert, Miranda

2016-06-01

Quality of life is typically reduced in children with mental health problems. Understanding the relationship between quality of life and mental health problems and the factors that moderate this association is a pressing priority. This was a cross-sectional study involving 45,398 children aged 8-13 years from 880 schools in England. Self-reported quality of life was assessed using nine items from the KIDSCREEN-10 and mental health was assessed using the Me and My School Questionnaire. Demographic information (gender, age, ethnicity, socio-economic status) was also recorded. Quality of life was highest in children with no problems and lowest in children with both internalising and externalising problems. There was indication that quality of life may be reduced in children with internalising problems compared with externalising problems. Approximately 12 % children with mental health problems reported high quality of life. The link between mental health and quality of life was moderated by gender and age but not by socio-economic status or ethnicity. This study supports previous work showing mental health and quality of life are related but not synonymous. The findings have implications for measuring quality of life in child mental health settings and the need for approaches to support children with mental health problems that are at particular risk of poor quality of life.

Seven Basic Tools of Quality Control: An Appropriate Tools for Solving Quality Problems in the Organizations

OpenAIRE

Neyestani, Behnam

2017-01-01

Dr. Kaoru Ishikawa was first total quality management guru, who has been associated with the development and advocacy of using the seven quality control (QC) tools in the organizations for problem solving and process improvements. Seven old quality control tools are a set of the QC tools that can be used for improving the performance of the production processes, from the first step of producing a product or service to the last stage of production. So, the general purpose of this paper was to...

Storage Solutions for Power Quality Problems in Cyprus Electricity Distribution Network

Directory of Open Access Journals (Sweden)

Andreas Poullikkas

2014-01-01

Full Text Available In this work, a prediction of the effects of introducing energy storage systems on the network stability of the distribution network of Cyprus and a comparison in terms of cost with a traditional solution is carried out. In particular, for solving possible overvoltage problems, several scenarios of storage units' installation are used and compared with the alternative solution of extra cable connection between the node with the lowest voltage and the node with the highest voltage of the distribution network. For the comparison, a case study of a typical LV distribution feeder in the power system of Cyprus is used. The results indicated that the performance indicator of each solution depends on the type, the size and the position of installation of the storage unit. Also, as more storage units are installed the better the performance indicator and the more attractive is the investment in storage units to solve power quality problems in the distribution network. In the case where the technical requirements in voltage limitations according to distribution regulations are satisfied with one storage unit, the installation of an additional storage unit will only increase the final cost. The best solution, however, still remains the alternative solution of extra cable connection between the node with the lowest voltage and the node with the highest voltage of the distribution network, due to the lower investment costs compared to that of the storage units.

Quality of life of people with mental health problems: a synthesis of qualitative research.

Science.gov (United States)

Connell, Janice; Brazier, John; O'Cathain, Alicia; Lloyd-Jones, Myfanwy; Paisley, Suzy

2012-11-22

To identify the domains of quality of life important to people with mental health problems. A systematic review of qualitative research undertaken with people with mental health problems using a framework synthesis. We identified six domains: well-being and ill-being; control, autonomy and choice; self-perception; belonging; activity; and hope and hopelessness. Firstly, symptoms or 'ill-being' were an intrinsic aspect of quality of life for people with severe mental health problems. Additionally, a good quality of life was characterised by the feeling of being in control (particularly of distressing symptoms), autonomy and choice; a positive self-image; a sense of belonging; engagement in meaningful and enjoyable activities; and feelings of hope and optimism. Conversely, a poor quality life, often experienced by those with severe mental health difficulties, was characterized by feelings of distress; lack of control, choice and autonomy; low self-esteem and confidence; a sense of not being part of society; diminished activity; and a sense of hopelessness and demoralization. Generic measures fail to address the complexity of quality of life measurement and the broad range of domains important to people with mental health problems.

Quality of life of people with mental health problems: a synthesis of qualitative research

Directory of Open Access Journals (Sweden)

Connell Janice

2012-11-01

Full Text Available Abstract Purpose To identify the domains of quality of life important to people with mental health problems. Method A systematic review of qualitative research undertaken with people with mental health problems using a framework synthesis. Results We identified six domains: well-being and ill-being; control, autonomy and choice; self-perception; belonging; activity; and hope and hopelessness. Firstly, symptoms or ‘ill-being’ were an intrinsic aspect of quality of life for people with severe mental health problems. Additionally, a good quality of life was characterised by the feeling of being in control (particularly of distressing symptoms, autonomy and choice; a positive self-image; a sense of belonging; engagement in meaningful and enjoyable activities; and feelings of hope and optimism. Conversely, a poor quality life, often experienced by those with severe mental health difficulties, was characterized by feelings of distress; lack of control, choice and autonomy; low self-esteem and confidence; a sense of not being part of society; diminished activity; and a sense of hopelessness and demoralization. Conclusions Generic measures fail to address the complexity of quality of life measurement and the broad range of domains important to people with mental health problems.

Quality Education Improvement: Yemen and the Problem of the "Brain Drain"

Science.gov (United States)

Muthanna, Abdulghani

2015-01-01

This paper presents an overview of the problems that hinder improvement of the quality of education in Yemen, with a particular focus on higher education institutions. It discusses in particular the problem of the brain drain and why this phenomenon is occurring in Yemen. Semi-structured interviews with three professors at higher education…

Language Problems and the Final Act. Esperanto Documents, New Series No. 11A.

Science.gov (United States)

Universal Esperanto Association, Rotterdam (Netherlands).

The Final Act of the Conference on Security and Co-operation in Europe, linguistic problems in the way of cooperation, language differences and the potential for discriminatory practice, and the need for a new linguistic order are discussed. It is suggested that misunderstandings arising from differences of language reduce the ability of the 35…

The Profile of Creativity and Proposing Statistical Problem Quality Level Reviewed From Cognitive Style

Science.gov (United States)

Awi; Ahmar, A. S.; Rahman, A.; Minggi, I.; Mulbar, U.; Asdar; Ruslan; Upu, H.; Alimuddin; Hamda; Rosidah; Sutamrin; Tiro, M. A.; Rusli

2018-01-01

This research aims to reveal the profile about the level of creativity and the ability to propose statistical problem of students at Mathematics Education 2014 Batch in the State University of Makassar in terms of their cognitive style. This research uses explorative qualitative method by giving meta-cognitive scaffolding at the time of research. The hypothesis of research is that students who have field independent (FI) cognitive style in statistics problem posing from the provided information already able to propose the statistical problem that can be solved and create new data and the problem is already been included as a high quality statistical problem, while students who have dependent cognitive field (FD) commonly are still limited in statistics problem posing that can be finished and do not load new data and the problem is included as medium quality statistical problem.

Classroom Quality at Pre-kindergarten and Kindergarten and Children’s Social Skills and Behavior Problems

Science.gov (United States)

Broekhuizen, Martine L.; Mokrova, Irina L.; Burchinal, Margaret R.; Garrett-Peters, Patricia T.

2016-01-01

Focusing on the continuity in the quality of classroom environments as children transition from preschool into elementary school, this study examined the associations between classroom quality in pre-kindergarten and kindergarten and children’s social skills and behavior problems in kindergarten and first grade. Participants included 1175 ethnically-diverse children (43% African American) living in low-wealth rural communities of the US. Results indicated that children who experienced higher levels of emotional and organizational classroom quality in both pre-kindergarten and kindergarten demonstrated better social skills and fewer behavior problems in both kindergarten and first grade comparing to children who did not experience higher classroom quality. The examination of the first grade results indicated that the emotional and organizational quality of pre-kindergarten classrooms was the strongest predictor of children’s first grade social skills and behavior problems. The study results are discussed from theoretical, practical, and policy perspectives. PMID:26949286

Second-order polynomial model to solve the least-cost lumber grade mix problem

Science.gov (United States)

Urs Buehlmann; Xiaoqiu Zuo; R. Edward. Thomas

2010-01-01

Material costs when cutting solid wood parts from hardwood lumber for secondary wood products manufacturing account for 20 to 50 percent of final product cost. These costs can be minimized by proper selection of the lumber quality used. The lumber quality selection problem is referred to as the least-cost lumber grade mix problem in the industry. The objective of this...

Fact Sheet: Notice of Ambient Water Quality Criteria Document for Tributyltin (TBT) - Final

Science.gov (United States)

Information pertaining to 2004 Final Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Tributyltin (TBT) for freshwater and saltwater. This fact sheet includes the safe levels of TBT that should protect the majority of species.

Addressing the Wicked Problem of Quality in Higher Education: Theoretical Approaches and Implications

Science.gov (United States)

Krause, Kerri-Lee

2012-01-01

This article explores the wicked problem of quality in higher education, arguing for a more robust theorising of the subject at national, institutional and local department level. The focus of the discussion rests on principles for theorising in more rigorous ways about the multidimensional issue of quality. Quality in higher education is proposed…

Relationship Between Sleep Problems and Quality of Life in Children With ADHD.

Science.gov (United States)

Yürümez, Esra; Kılıç, Birim Günay

2016-01-01

The purpose of this study is to assess the sleep behaviors, sleep problems and frequency, and relationship with psychiatric comorbidities in ADHD Combined type and to evaluate the effect of sleep problems on quality of life. Forty-six boys, aged 7 to 13 years, with ADHD-combined type and 31 healthy boys were included. ADHD children were never treated for sleep or psychiatric disorders. Intelligence quotient (IQ) test scores were minimum 80, body mass index were normal and did not have medical disorders. Parents completed Children's Sleep Habits Questionnaire, Conners' Parent Rating Scale and The Pediatric Quality of Life Inventory (PedsQL) and participants were asked about sleep behaviors and were administered PedsQL and Schedule for Affective Disorders and Schizophrenia. The frequency of sleep problems in ADHD is 84.8%, higher than the control group (p = .002). Evaluating PedsQL scores, the quality of life is worse in physical, psychosocial health, and total life quality (p children with ADHD compared with healthy control participants. As the ADHD group have more night wakings than the control group through the night, it is thought that night wakings that cause a partitioned sleep may be important signs seen in ADHD. That could be suggested by two hypotheses. First one is that, daytime sleepiness is more common in ADHD and those children present excessive hyperactivity during the day to stay awake and the second one is the improvement of ADHD signs when the drugs for sleepiness are used. Usage of standardized and valid diagnostic criteria, exclusion of adolescence, gender, socioeconomic level, primary sleep problems, medical disorders and low IQ level, making allowances for effect of comorbidities and having compared with the control group are the important methodological features of this study. The most important limitation of this study is small sample size that makes the findings less generalizable to other groups of children with ADHD, and another one is not

Helping nursing homes "at risk" for quality problems: a statewide evaluation.

Science.gov (United States)

Rantz, Marilyn J; Cheshire, Debra; Flesner, Marcia; Petroski, Gregory F; Hicks, Lanis; Alexander, Greg; Aud, Myra A; Siem, Carol; Nguyen, Katy; Boland, Clara; Thomas, Sharon

2009-01-01

The Quality Improvement Program for Missouri (QIPMO), a state school of nursing project to improve quality of care and resident outcomes in nursing homes, has a special focus to help nursing homes identified as "at risk" for quality concerns. In fiscal year 2006, 92 of 492 Medicaid-certified facilities were identified as "at risk" using quality indicators (QIs) derived from Minimum Data Set (MDS) data. Sixty of the 92 facilities accepted offered on-site clinical consultations by gerontological expert nurses with graduate nursing education. Content of consultations include quality improvement, MDS, care planning, evidence-based practice, and effective teamwork. The 60 "at-risk" facilities improved scores 4%-41% for 5 QIs: pressure ulcers (overall and high risk), weight loss, bedfast residents, and falls; other facilities in the state did not. Estimated cost savings (based on prior cost research) for 444 residents who avoided developing these clinical problems in participating "at-risk" facilities was more than $1.5 million for fiscal year 2006. These are similar to estimated savings of $1.6 million for fiscal year 2005 when 439 residents in "at-risk" facilities avoided clinical problems. Estimated savings exceed the total program cost by more than $1 million annually. QI improvements demonstrate the clinical effectiveness of on-site clinical consultation by gerontological expert nurses with graduate nursing education.

Legal problems inherent in the development of geopressured and geothermal resources in Louisiana. Final report

Energy Technology Data Exchange (ETDEWEB)

Harrell, T.A.; Pike, R.W.; Wilkins, B.; Hill, T.M.

1978-03-01

The legal framework within which the geopressured resource will have to be developed in Louisiana is discussed generally. Those problems which may be created by its development within that framework are identified. Where possible, solutions are offered to those problems or at least techniques or devices are indicated which might be considered in their resolution. Finally, a compendium is assembled of those statutory or regulatory provisions which may regulate or affect the resource to the end that it might serve as a handbook for the evaluation of the legal and institutional problems which will face a prospective developer, when and if the resource development is undertaken in Louisiana. (MHR)

THE DISCRETE TIME, COST AND QUALITY TRADE-OFF PROBLEM IN PROJECT SCHEDULING: AN EFFICIENT SOLUTION METHOD BASED ON CELLDE ALGORITHM

Directory of Open Access Journals (Sweden)

Gh. Assadipour

2012-01-01

Full Text Available

ENGLISH ABSTRACT:The trade-off between time, cost, and quality is one of the important problems of project management. This problem assumes that all project activities can be executed in different modes of cost, time, and quality. Thus a manager should select each activity’s mode such that the project can meet the deadline with the minimum possible cost and the maximum achievable quality. As the problem is NP-hard and the objectives are in conflict with each other, a multi-objective meta-heuristic called CellDE, which is a hybrid cellular genetic algorithm, is implemented as the optimisation method. The proposed algorithm provides project managers with a set of non-dominated or Pareto-optimal solutions, and enables them to choose the best one according to their preferences. A set of problems of different sizes is generated and solved using the proposed algorithm. Three metrics are employed for evaluating the performance of the algorithm, appraising the diversity and convergence of the achieved Pareto fronts. Finally a comparison is made between CellDE and another meta-heuristic available in the literature. The results show the superiority of CellDE.

AFRIKAANSE OPSOMMING: ‘n Balans tussen tyd, koste en gehalte is een van die belangrike probleme van projekbestuur. Die vraagstuk maak gewoonlik die aanname dat alle projekaktiwiteite uitgevoer kan word op uiteenlopende wyses wat verband hou met koste, tyd en gehalte. ‘n Projekbestuurder selekteer gewoonlik die uitvoeringsmetodes sodanig per aktiwiteit dat gehoor gegegee word aan minimum koste en maksimum gehalte teen die voorwaarde van voltooiingsdatum wat bereik moet word.

Aangesien die beskrewe problem NP-hard is, word dit behandel ten opsigte van konflikterende doelwitte met ‘n multidoelwit metaheuristiese metode (CellDE. Die metode is ‘n hibride-sellulêre genetiese algoritme. Die algoritme lewer aan die besluitvormer ‘n versameling van ongedomineerde of Pareto

Facing a Problem of Electrical Energy Quality in Ship Networks-measurements, Estimation, Control

Institute of Scientific and Technical Information of China (English)

Tomasz Tarasiuk; Janusz Mindykowski; Xiaoyan Xu

2003-01-01

In this paper, electrical energy quality and its indices in ship electric networks are introduced, especially the meaning of electrical energy quality terms in voltage and active and reactive power distribution indices. Then methods of measurement of marine electrical energy indices are introduced in details and a microprocessor measurement-diagnosis system with the function of measurement and control is designed. Afterwards, estimation and control of electrical power quality of marine electrical power networks are introduced. And finally, according to the existing method of measurement and control of electrical power quality in ship power networks, the improvement of relative method is proposed.

Quality of life of people with mental health problems: a synthesis of qualitative research

OpenAIRE

Connell, Janice; Brazier, John; O?Cathain, Alicia; Lloyd-Jones, Myfanwy; Paisley, Suzy

2012-01-01

Abstract Purpose To identify the domains of quality of life important to people with mental health problems. Method A systematic review of qualitative research undertaken with people with mental health problems using a framework synthesis. Results We identified six domains: well-being and ill-being; control, autonomy and choice; self-perception; belonging; activity; and hope and hopelessness. Firstly, symptoms or ‘ill-being’ were an intrinsic aspect of quality of life for people with severe m...

76 FR 57646 - Final Withdrawal of Certain Federal Aquatic Life Water Quality Criteria Applicable to Wisconsin

Science.gov (United States)

2011-09-16

... Final Withdrawal of Certain Federal Aquatic Life Water Quality Criteria Applicable to Wisconsin AGENCY... aquatic life water quality criteria applicable to Wisconsin? C. Why is the EPA not withdrawing Wisconsin's chronic endrin aquatic life use criterion for waters designated as Warm Water Sportfish and Warm Water...

Epidemiological comparisons of problems and positive qualities reported by adolescents in 24 countries

DEFF Research Database (Denmark)

Rescorla, Leslie; Achenbach, Thomas M; Ivanova, Masha Y

2007-01-01

In this study, the authors compared ratings of behavioral and emotional problems and positive qualities on the Youth Self-Report (T. M. Achenbach & L. A. Rescorla, 2001) by adolescents in general population samples from 24 countries (N = 27,206). For problem scales, country effect sizes (ESs) ran...

75 FR 29976 - Certain Cut-to-Length Carbon-Quality Steel Plate Products From Italy: Extension of the Final...

Science.gov (United States)

2010-05-28

... DEPARTMENT OF COMMERCE International Trade Administration [A-475-826] Certain Cut-to-Length Carbon-Quality Steel Plate Products From Italy: Extension of the Final Results of Antidumping Duty Administrative...-quality steel plate products from Italy. See Certain Cut-to-Length Carbon-Quality Steel Plate Products...

Impact of initial surface parameters on the final quality of laser micro-polished surfaces

Science.gov (United States)

Chow, Michael; Bordatchev, Evgueni V.; Knopf, George K.

2012-03-01

Laser micro-polishing (LμP) is a new laser-based microfabrication technology for improving surface quality during a finishing operation and for producing parts and surfaces with near-optical surface quality. The LμP process uses low power laser energy to melt a thin layer of material on the previously machined surface. The polishing effect is achieved as the molten material in the laser-material interaction zone flows from the elevated regions to the local minimum due to surface tension. This flow of molten material then forms a thin ultra-smooth layer on the top surface. The LμP is a complex thermo-dynamic process where the melting, flow and redistribution of molten material is significantly influenced by a variety of process parameters related to the laser, the travel motions and the material. The goal of this study is to analyze the impact of initial surface parameters on the final surface quality. Ball-end micromilling was used for preparing initial surface of samples from H13 tool steel that were polished using a Q-switched Nd:YAG laser. The height and width of micromilled scallops (waviness) were identified as dominant parameter affecting the quality of the LμPed surface. By adjusting process parameters, the Ra value of a surface, having a waviness period of 33 μm and a peak-to-valley value of 5.9 μm, was reduced from 499 nm to 301 nm, improving the final surface quality by 39.7%.

Problems of Clinical Nurse Performance Appraisal System: A Qualitative Study

Directory of Open Access Journals (Sweden)

Nasrin Nikpeyma

2014-03-01

Conclusion: The findings of this study reveal that the nurse performance appraisal system confronts with various problems. Some of these problems are related to organizational context while the others concerned structure, process and results of the performance appraisal system. In order to achieve high quality of patient care as the final goal of performance appraisal, changing and revision of this system is necessary.

Classroom quality at pre-kindergarten and kindergarten and children's social skills and behavior problems

NARCIS (Netherlands)

Broekhuizen, Martine L.; Mokrova, Irina L.; Burchinal, Margaret R.; Garrett-Peters, Patricia T.

2016-01-01

Focusing on the continuity in the quality of classroom environments as children transition from preschool into elementary school, this study examined the associations between classroom quality in pre-kindergarten and kindergarten and children's social skills and behavior problems in kindergarten and

Relationships between Undergraduates' Argumentation Skills, Conceptual Quality of Problem Solutions, and Problem Solving Strategies in Introductory Physics

Science.gov (United States)

Rebello, Carina M.

2012-01-01

This study explored the effects of alternative forms of argumentation on undergraduates' physics solutions in introductory calculus-based physics. A two-phase concurrent mixed methods design was employed to investigate relationships between undergraduates' written argumentation abilities, conceptual quality of problem solutions, as well…

78 FR 29113 - Certain Cut-to-Length Carbon-Quality Steel Plate Products From the Republic of Korea: Final...

Science.gov (United States)

2013-05-17

...-Quality Steel Plate Products From the Republic of Korea: Final Results of Antidumping Duty Administrative... administrative review of the antidumping duty order on certain cut-to-length carbon-quality steel plate products... duty order on certain cut-to-length carbon-quality steel plate products from the Republic of Korea...

75 FR 64254 - Certain Hot-Rolled Flat-Rolled Carbon Quality Steel Products From Brazil; Final Results of...

Science.gov (United States)

2010-10-19

...-Rolled Carbon Quality Steel Products From Brazil; Final Results of Antidumping Duty Administrative Review... for the Final Results, 75 FR 19369 (April 14, 2010) (Preliminary Results). This review covers sales of... Products from Brazil,'' dated June 22, 2010 (USIMINAS Sales Verification Report). Following the release of...

Using creative problem solving (TRIZ) in improving the quality of hospital services.

Science.gov (United States)

LariSemnani, Behrouz; Mohebbi Far, Rafat; Shalipoor, Elham; Mohseni, Mohammad

2014-08-14

TRIZ is an initiative and SERVQUAL is a structured methodology for quality improvement. Using these tools, inventive problem solving can be applied for quality improvement, and the highest quality can be reached using creative quality improvement methodology. The present study seeks to determine the priority of quality aspects of services provided for patients in the hospital as well as how TRIZ can help in improving the quality of those services. This Study is an applied research which used a dynamic qualitative descriptive survey method during year 2011. Statistical population includes every patient who visited in one of the University Hospitals from March 2011. There existed a big gap between patients' expectations from what seemingly is seen (the design of the hospital) and timely provision of services with their perceptions. Also, quality aspects of services were prioritized as follows: keeping the appearance of hospital (the design), accountability, assurance, credibility and having empathy. Thus, the only thing which mattered most for all staff and managers of studied hospital was the appearance of hospital as well as its staff look. This can grasp a high percentage of patients' satisfaction. By referring to contradiction matrix, the most important principles of TRIZ model were related to tangible factors including principles No. 13 (discarding and recovering), 25 (self-service), 35 (parameter changes), and 2 (taking out). Furthermore, in addition to these four principles, principle No. 24 (intermediary) was repeated most among the others. By utilizing TRIZ, hospital problems can be examined with a more open view, Go beyond The conceptual framework of the organization and responded more quickly to patients ' needs.

Epidemiological Comparisons of Problems and Positive Qualities Reported by Adolescents in 24 Countries

Science.gov (United States)

Rescorla, Leslie; Achenbach, Thomas M.; Ivanova, Masha Y.; Dumenci, Levent; Almqvist, Fredrik; Bilenberg, Niels; Bird, Hector; Broberg, Anders; Dobrean, Anca; Dopfner, Manfred; Erol, Nese; Forns, Maria; Hannesdottir, Helga; Kanbayashi, Yasuko; Lambert, Michael C.; Leung, Patrick; Minaei, Asghar; Mulatu, Mesfin S.; Novik, Torunn S.; Oh, Kyung-Ja; Roussos, Alexandra; Sawyer, Michael; Simsek, Zeynep; Steinhausen, Hans-Christoph; Weintraub, Sheila; Metzke, Christa Winkler; Wolanczyk, Tomasz; Zilber, Nelly; Zukauskiene, Rita; Verhulst, Frank

2007-01-01

In this study, the authors compared ratings of behavioral and emotional problems and positive qualities on the Youth Self-Report (T. M. Achenbach & L. A. Rescorla, 2001) by adolescents in general population samples from 24 countries (N = 27,206). For problem scales, country effect sizes (ESs) ranged from 3% to 9%, whereas those for gender and age…

Longitudinal effects of sibling relationship quality on adolescent problem behavior : A cross-ethnic comparison

NARCIS (Netherlands)

Buist, K.L.; Paalman, C.H.; Branje, S.T.J.; Dekovic, M.; Reitz, E.; Verhoeven, M.; Meeus, W.H.J.; Koot, H.M.; Hale III, W.W.

2014-01-01

The aim of the present study was to examine whether adolescents of Moroccan and Dutch origin differ concerning sibling relationship quality and to examine whether the associations between quality of the sibling relationship and level and change in externalizing and internalizing problem behavior are

Longitudinal effects of sibling relationship quality on adolescent problem behavior: A cross-ethnic comparison

NARCIS (Netherlands)

Buist, K.L.; Paalman, C.H.; Branje, S.J.T.; Dekovic, M.; Reitz, E.; Verhoeven, M.; Meeus, W.H.J.; Koot, H.M.; Hale, W.W.

2014-01-01

The aim of the present study was to examine whether adolescents of Moroccan and Dutch origin differ concerning sibling relationship quality and to examine whether the associations between quality of the sibling relationship and level and change in externalizing and internalizing problem behavior are

Rich Vehicle Routing Problems and Applications

DEFF Research Database (Denmark)

Wen, Min

very short computational time on real-life data involving up to 200 pairs of suppliers and customers. The second problem we consider is a dynamic vehicle routing problem with multiple objectives over a planning horizon that consists of multiple periods. In this problem, customer orders are revealed...... the company’s solution in terms of all the objectives, including the travel time, customer waiting and daily workload balances, under the given constraints considered in the work. Finally, we address an integrated vehicle routing and driver scheduling problem, in which a large number of practical constraints....... The method is implemented and tested on real-life data involving up to 2000 orders. It is shown that the method is able to provide solutions of good quality within reasonable running time....

Identifying and attributing common data quality problems: temperature and precipitation observations in Bolivia and Peru

Science.gov (United States)

Hunziker, Stefan; Gubler, Stefanie; Calle, Juan; Moreno, Isabel; Andrade, Marcos; Velarde, Fernando; Ticona, Laura; Carrasco, Gualberto; Castellón, Yaruska; Oria Rojas, Clara; Brönnimann, Stefan; Croci-Maspoli, Mischa; Konzelmann, Thomas; Rohrer, Mario

2016-04-01

Assessing climatological trends and extreme events requires high-quality data. However, for many regions of the world, observational data of the desired quality is not available. In order to eliminate errors in the data, quality control (QC) should be applied before data analysis. If the data still contains undetected errors and quality problems after QC, a consequence may be misleading and erroneous results. A region which is seriously affected by observational data quality problems is the Central Andes. At the same time, climatological information on ongoing climate change and climate risks are of utmost importance in this area due to its vulnerability to meteorological extreme events and climatic changes. Beside data quality issues, the lack of metadata and the low station network density complicate quality control and assessment, and hence, appropriate application of the data. Errors and data problems may occur at any point of the data generation chain, e.g. due to unsuitable station configuration or siting, poor station maintenance, erroneous instrument reading, or inaccurate data digitalization and post processing. Different measurement conditions in the predominantly conventional station networks in Bolivia and Peru compared to the mostly automated networks e.g. in Europe or Northern America may cause different types of errors. Hence, applying QC methods used on state of the art networks to Bolivian and Peruvian climate observations may not be suitable or sufficient. A comprehensive amount of Bolivian and Peruvian maximum and minimum temperature and precipitation in-situ measurements were analyzed to detect and describe common data quality problems. Furthermore, station visits and reviews of the original documents were done. Some of the errors could be attributed to a specific source. Such information is of great importance for data users, since it allows them to decide for what applications the data still can be used. In ideal cases, it may even allow to

The assessment of quality of products using selected quality instruments

Directory of Open Access Journals (Sweden)

Edyta Kardas

2016-03-01

Full Text Available The quality parameters of products should be controlled at every stage of the production process, since it allows detection of any problems even in the initial stages of production processes and removes their causes during manufacturing. Final control of products is intended to capture non-conforming products that did not go to the customers. The results of such controls should constantly be analysed. Such analysis can help to detect the most common problems, determine some dependences or identify the causes of such situations. A lot of different instruments that can support improvement of processes can be used for this kind of analysis. The paper presents the possibility of using some tools which can be utilized to support the analysis and assessment of quality of products at different stages of the production process. The quality analysis of exemplary products using selected quality methods and tolls is carried out. Metal sleeve, that is part of electronic control subassembly of anti-blocking system of ABS, which was the research component being studied.

Modelling of air quality for Winter and Summer episodes in Switzerland. Final report

Energy Technology Data Exchange (ETDEWEB)

Andreani-Aksoyoglu, S.; Keller, J.; Barmpadimos, L.; Oderbolz, D.; Tinguely, M.; Prevot, A. [Paul Scherrer Institute (PSI), Laboratory of Atmospheric Chemistry, Villigen (Switzerland); Alfarra, R. [University of Manchester, Manchester (United Kingdom); Sandradewi, J. [Jisca Sandradewi, Hoexter (Germany)

2009-05-15

This final report issued by the General Energy Research Department and its Laboratory of Atmospheric Chemistry at the Paul Scherrer Institute (PSI) reports on the results obtained from the modelling of regional air quality for three episodes, January-February 2006, June 2006 and January 2007. The focus of the calculations is on particulate matter concentrations, as well as on ozone levels in summer. The model results were compared with the aerosol data collected by an Aerosol Mass Spectrometer (AMS), which was operated during all three episodes as well as with the air quality monitoring data from further monitoring programs. The air quality model used in this study is described and the results obtained for various types of locations - rural, city, high-altitude and motorway-near - are presented and discussed. The models used are described.

Discussion in primary ecological environmental problems and relevant countermeasures in China

International Nuclear Information System (INIS)

An Yongfeng

2003-01-01

On the basis of sufficient statistical data, the primary ecological environmental problems, including water/soil loss and dissertation, water resource shortage and water pollution, deterioration of air quality and air pollution, despoilation of biodiversity, and environmental pollution, are listed in this paper. In addition, the causes of these problems are analyzed. Finally, relevant strategies and measures for environmental protection are brought forward. (authors)

Overlapping genetic and environmental influences among men's alcohol consumption and problems, romantic quality and social support.

Science.gov (United States)

Salvatore, J E; Prom-Wormley, E; Prescott, C A; Kendler, K S

2015-08-01

Alcohol consumption and problems are associated with interpersonal difficulties. We used a twin design to assess in men the degree to which genetic or environmental influences contributed to the covariance between alcohol consumption and problems, romantic quality and social support. The sample included adult male-male twin pairs (697 monozygotic and 487 dizygotic) for whom there were interview-based data on: alcohol consumption (average monthly alcohol consumption in the past year); alcohol problems (lifetime alcohol dependence symptoms); romantic conflict and warmth; friend problems and support; and relative problems and support. Key findings were that genetic and unique environmental factors contributed to the covariance between alcohol consumption and romantic conflict; genetic factors contributed to the covariance between alcohol problems and romantic conflict; and common and unique environmental factors contributed to the covariance between alcohol problems and friend problems. Recognizing and addressing the overlapping genetic and environmental influences that alcohol consumption and problems share with romantic quality and other indicators of social support may have implications for substance use prevention and intervention efforts.

Air quality in inter-city buses : final report

International Nuclear Information System (INIS)

2005-01-01

Various studies have suggested that air quality inside automobiles and school buses may be poorer than ambient or nearby air quality, and that concentrations of vehicle-related pollutants in city buses may be sufficiently elevated to pose concerns for vehicle occupants and operators. This paper presented the results of preliminary investigation of levels of some pollutants in inter-city buses to determine whether a fuller investigation is warranted. Another objective of the investigation was to develop methods for assessing air quality within road vehicles. Students carried monitoring equipment on 28 inter-city trips made by Greyhound Canada buses during July and August 2004. The equipment recorded average levels of carbon monoxide (CO) and nitrogen dioxide (NO 2 ), as well as concentrations of particulate matter. Bus routes were selected that allowed for an average of 10 hours of total sampling time in a day. Data was recorded on pumps, run times and routes taken. Results indicated that levels of CO in the buses were much lower than the national standard of acceptable levels for CO. Levels of NO 2 were on average lower, but 5 of the 19 recorded values exceeded acceptable levels. Average particulate levels recorded in the buses were considered acceptable, although some of the recorded levels were higher than desirable. It was concluded that further work on in-vehicle levels of NO 2 and particulate matter could be warranted. Although several procedural and equipment problems were encountered, the methods used in the investigation appeared to be valid, and were thought to be suitable for further work on in-vehicle concentrations of pollutants. 21 refs

Health related quality of life, cognitive functioning and behaviour problems in children

NARCIS (Netherlands)

Vrijmoet-Wiersma, C.M.J.; Kooloos, V.M.; Koopman, H.M.; Kolk, A.M.; van der Laan, I.; Grootenhuis, M.A.; Egeler, R.M.

2009-01-01

Background: This study was designed to evaluate generic and disease-specific health-related quality of life (HRQoL), cognitive functioning and behaviour problems of children with Langerhans Cell Histiocytosis (LCH). Furthermore, we investigated which medical determinants and social demographic

Neuropsychiatric symptoms and quality of life in patients in the final phase of dementia.

NARCIS (Netherlands)

Koopmans, R.T.C.M.; Molen, M. van der; Raats, M.; Ettema, T.P.

2009-01-01

OBJECTIVES: To assess neuropsychiatric symptoms and quality of life in a group of patients in the final phase of dementia. METHODS: All patients with dementia (n = 216) residing on dementia special care units of two Dutch nursing homes were included in the study provided they met the criteria for

An Investigation Into HPLC Data Quality Problems

Science.gov (United States)

Hooker, Stanford B.; VanHeukelem, Laurie

2011-01-01

This report summarizes the analyses and results produced by a five-member investigative team of Government, university, and industry experts, established by NASA HQ. The team examined data quality problems associated with high performance liquid chromatography (HPLC) analyses of pigment concentrations in seawater samples produced by the San Diego State University (SDSU) Center for Hydro-Optics and Remote Sensing (CHORS). This report shows CHORS did not validate the methods used before placing them into service to analyze field samples for NASA principal investigators (PIs), even though the HPLC literature contained easily accessible method validation procedures, and the importance of implementing them, more than a decade ago. In addition, there were so many sources of significant variance in the CHORS methodologies, that the HPLC system rarely operated within performance criteria capable of producing the requisite data quality. It is the recommendation of the investigative team to a) not correct the data, b) make all the data that was temporarily sequestered available for scientific use, and c) label the affected data with an appropriate warning, e.g., "These data are not validated and should not be used as the sole basis for a scientific result, conclusion, or hypothesis--independent corroborating evidence is required."

Work stressors, sleep quality, and alcohol-related problems across deployment: A parallel process latent growth modeling approach among Navy members.

Science.gov (United States)

Bravo, Adrian J; Kelley, Michelle L; Hollis, Brittany F

2017-10-01

This study examined how work stressors were associated with sleep quality and alcohol-related problems among U.S. Navy members over the course of deployment. Participants were 101 U.S. Navy members assigned to an Arleigh Burke-class destroyer who experienced an 8-month deployment after Operational Enduring Freedom/Operation Iraqi Freedom. Approximately 6 weeks prior to deployment, 6 weeks after deployment, and 6 months reintegration, participants completed measures that assessed work stressors, sleep quality, and alcohol-related problems. A piecewise latent growth model was conducted in which the structural paths assessed if work stressors influenced sleep quality or its growth over time, and in turn if sleep quality influenced alcohol-related problems intercepts or growth over time. A significant indirect effect was found such that increases in work stressors from pre- to postdeployment predicted decreases in sleep quality, which in turn were associated with increases in alcohol-related problems from pre- to postdeployment. These effects were maintained from postdeployment through the 6-month reintegration. Findings suggest that work stressors may have important implications for sleep quality and alcohol-related problems. Positive methods of addressing stress and techniques to improve sleep quality are needed as both may be associated with alcohol-related problems among current Navy members. Copyright © 2016 John Wiley & Sons, Ltd.

75 FR 39252 - Release of Final Documents Related to the Review of the National Ambient Air Quality Standards...

Science.gov (United States)

2010-07-08

... Quality Standards: Scope and Methods Plan for Health Risk and Exposure Assessment and Particulate Matter... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OAR-2007-0492; FRL-9171-8] Release of Final Documents...: Environmental Protection Agency (EPA). ACTION: Notice of Availability. SUMMARY: The Office of Air Quality...

Innovation of Supervision System for Quality and Safety of Edible Agricultural Products

Institute of Scientific and Technical Information of China (English)

Xingxing; MEI; Zhongchao; FENG

2014-01-01

This paper elaborated multidimensional characteristics of quality and safety of agricultural products,introduced current situation of quality and safety supervision of edible agricultural products in China,analyzed existing problems of quality and safety supervision system and corresponding reasons,and finally came up with recommendations for innovation of supervision system for quality and safety of agricultural products.

THE QUALITY MANAGEMENT SYSTEM AT THE UNIVERSITY. PROBLEMS IN IMPLEMENTING

Directory of Open Access Journals (Sweden)

L. I. Nazina

2014-01-01

Full Text Available Summary. Beginning of the XXI century marked the active integration of Russia and the world community, including entry into the world educational space. The international activities of the leading universities of the country depends on the level of cooperation with foreign countries in the field of scientific and educational activities. Today topical issue recognition of the quality of Russian education abroad. One way to confirm this is the certification of the quality management system of the university. As long-term, mostly foreign experience, achieving the required level of quality and continue to improve the most productive is accomplished by implementing a quality management system in accordance with ISO 9000. In the modern system of higher education a lot of attention paid to quality, to ensure the competitiveness of the institution in the education market by training qualified specialists. Implementation of the quality management system is to move the university to process management prepared in accordance with approved and enacted by the QMS documents. Workplaces should determine the duties, powers and responsibilities of each employee within the quality management system, develop and implement the job descriptions, staff verify documented procedures. Implementation of the certification must be accompanied by specific and persistent administration by management in conjunction with the training and retraining of all managers and employees involved in the work on the implementation of the QMS in the organization. This article describes the goals, objectives in the formation and implementation of QMS in higher education arising from this problem and barriers (information, methodological, psychological, multiple ways to address them.

MATERNAL INTERACTION QUALITY MODERATES EFFECTS OF PRENATAL MATERNAL EMOTIONAL SYMPTOMS ON GIRLS' INTERNALIZING PROBLEMS.

Science.gov (United States)

Endendijk, Joyce J; De Bruijn, Anouk T C E; Van Bakel, Hedwig J A; Wijnen, Hennie A A; Pop, Victor J M; Van Baar, Anneloes L

2017-09-01

The role of mother-infant interaction quality is studied in the relation between prenatal maternal emotional symptoms and child behavioral problems. Healthy pregnant, Dutch women (N = 96, M = 31.6, SD = 3.3) were allocated to the "exposed group" (n = 46), consisting of mothers with high levels of prenatal feelings of anxiety and depression, or the "low-exposed group" (n = 50), consisting of mothers with normal levels of depressive or anxious symptoms during pregnancy. When the children (49 girls, 47 boys) were 23 to 60 months of age (M = 39.0, SD = 9.6), parents completed the Child Behavior Checklist (T.M. Achenbach & L.A. Rescorla, ), and mother-child interaction quality during a home visit was rated using the Emotional Availability Scales. There were no differences in mother-child interaction quality between the prenatally exposed and low-exposed groups. Girls exposed to high prenatal emotional symptoms showed more internalizing problems, if maternal interaction quality was less optimal. No significant effects were found for boys. © 2017 Michigan Association for Infant Mental Health.

Child Reactivity Moderates the Over-Time Association between Mother-Child Conflict Quality and Externalizing Problems

Science.gov (United States)

Nelson, Jackie A.

2015-01-01

Constructive parent-child conflict interactions that teach children to problem-solve and negotiate can enhance children's social adjustment. This paper identifies constructive and destructive qualities of mother-child conflict and explores whether child temperament moderated associations with changes in externalizing problems over time. One…

77 FR 21527 - Certain Cut-to-Length Carbon-Quality Steel Plate Products From the Republic of Korea: Final...

Science.gov (United States)

2012-04-10

... from the Republic of Korea. The review covers one manufacturer/ exporter. The period of review is...-Quality Steel Plate Products From the Republic of Korea: Final Results of Antidumping Duty Administrative... duty order on certain cut-to-length carbon-quality steel plate products (CTL plate) from the Republic...

ADOLESCENTS WITH BEHAVIORAL PROBLEMS: PERSONALITY, QUALITY OF LIFE AND SOCIAL HEALTH CARE

Directory of Open Access Journals (Sweden)

S. Ya. Volgina

2013-01-01

Full Text Available Deviant behavior of adolescents is a serious social problem in today's society because of the significant prevalence of this phenomenon. Authors present the results of the study of adolescents with behavioral problems. Aim: optimization of medical and social care for adolescents with behavioral problems. Patients and methods: the authors studied the incidence of this condition among children aged from 15 to 17 years using the software package «SOC/PEDIATRIA-2». The features of the personality structure of adolescents with deviant behavior were revealed using the adopted Russian short version of MMPI-MINI-MULT. Demographic and social characteristics of the families of adolescents were assessed. SF-36 questionnaire was applied for the quality of life assessment of the studied category. Results: increasing morbidity among adolescents was revealed due to various reasons: economic, medical and social. The study allowed to develop personal characteristics of the criteria in order to timely identify adolescents with accentuated and psychopathological features. The characteristics of quality of life were used as criteria of health care for adolescents with behavioral problems. The measures for the prevention and correction of deviant behavior among adolescents were proposed, including intersectoral integration and active participation of family in the process of rehabilitation. Conclusions: it is necessary to identify adolescents with deviant behavior timely, followed by a set of measures to provide them with health and social care to protect their health.

Modeling and Negotiating Service Quality

Science.gov (United States)

Benbernou, Salima; Brandic, Ivona; Cappiello, Cinzia; Carro, Manuel; Comuzzi, Marco; Kertész, Attila; Kritikos, Kyriakos; Parkin, Michael; Pernici, Barbara; Plebani, Pierluigi

In this chapter the research problems of specifying and negotiating QoS and its corresponding quality documents are analyzed. For this reason, this chapter is separated into two main sections, Section 6.1 and 6.2, with each dedicated to one of the two problems, i.e., QoS specification and negotiation, respectively. Each section has a similar structure: they first introduce the problem and then, in the remaining subsections, review related work. Finally, the chapter ends with Section 6.3, which identifies research gaps and presents potential research challenges in QoS modelling, specification and negotiation.

Benchmark problems for radiological assessment codes. Final report

International Nuclear Information System (INIS)

Mills, M.; Vogt, D.; Mann, B.

1983-09-01

This report describes benchmark problems to test computer codes used in the radiological assessment of high-level waste repositories. The problems presented in this report will test two types of codes. The first type of code calculates the time-dependent heat generation and radionuclide inventory associated with a high-level waste package. Five problems have been specified for this code type. The second code type addressed in this report involves the calculation of radionuclide transport and dose-to-man. For these codes, a comprehensive problem and two subproblems have been designed to test the relevant capabilities of these codes for assessing a high-level waste repository setting

Content and quality of workplace guidelines developed to prevent mental health problems

DEFF Research Database (Denmark)

Nexø, Mette Andersen; Kristensen, Josefine Vejlby; Grønvad, Majbritt Thorhauge

2018-01-01

Objectives A wide range of guidelines have been developed to prevent work-related mental health problems (MHP), but little is known about the quality of such guidelines. We systematically reviewed the content and quality of workplace guidelines aiming to prevent, detect, and/or manage work......-related MHP. Methods We conducted systematic online and database searches (MEDLINE; Web of Science; PsychNET; occupational safety and health databases) to identify guidelines. Eligibility criteria included guidelines recommending primary, secondary, or tertiary preventive interventions to be implemented...... at the workplace by employers, employees or organizational staff. A minimum of minimum three independent reviewers assessed the quality of guidelines using the Guidelines for Research and Evaluation (AGREE II). Guidelines rated ≥65% with regards to domain I, II, and III were considered to be of good developmental...

Ostomy-related problems and their impact on quality of life of colorectal cancer ostomates: a systematic review

NARCIS (Netherlands)

Sylvia M. Vonk-Klaassen; Hilde M. de Vocht; Erik Hans Eddes; Prof. Dr. Marieke J. Schuurmans; Marjolein E.M. den Ouden

2016-01-01

Aim Many long-term ostomates are ‘out-of-sight’ of healthcare, and it is unknown how ostomates deal with ostomy- related problems and how these problems affect their quality of life (QOL). The aim is to examine patient-related studies describing ostomy-related problems and their impact on the

Ostomy-related problems and their impact on quality of life of colorectal cancer ostomates : a systematic review

NARCIS (Netherlands)

Vonk-Klaassen, Sylvia M.; de Vocht, Hilde M.; den Ouden, Marjolein E M; Eddes, Eric Hans; Schuurmans, Marieke J.

2016-01-01

Aim: Many long-term ostomates are ‘out-of-sight’ of healthcare, and it is unknown how ostomates deal with ostomy-related problems and how these problems affect their quality of life (QOL). The aim is to examine patient-related studies describing ostomy-related problems and their impact on the

Problem-solving and developing quality management methods and techniques on the example of automotive industry

OpenAIRE

Jacek Łuczak; Radoslaw Wolniak

2015-01-01

The knowledge about methods and techniques of quality management together with their effective use can be definitely regarded as an indication of high organisational culture. Using such methods and techniques in an effective way can be attributed to certain level of maturity, as far as the quality management system in an organisation is concerned. There is in the paper an analysis of problem-solving methods and techniques of quality management in the automotive sector in Poland. The survey wa...

Non-linear optics for the final focus of the single-pass-collider

International Nuclear Information System (INIS)

Brown, K.L.; Spencer, J.E.

1981-02-01

The purpose of the final focus system (FFS) is to demagnify the beam envelope in the Collider arc lattice to a size suitable for beam collisions at the interaction region. The final spot size is determined by the beam emittance, the beta function β* at the IR, the momentum spread in the beam, and the quality of the FFS optics. In particular, if the focusing system is not chromatically corrected, the momentum dispersion in the beam can lead to a substantial degradation in the quality of the final focus. The objective is to design a FFS for 50 GeV/c within approx. 100 meters having an IR spot size sigma/sub xy/ of approximately 2 μm for a beam emittance of epsilon = 3 x 10 -10 m-rad and a momentum spread of delta = +-0.5%. This requires a β/sub x,y/ equal to or less than 1 cm. This report considers the problems encountered in the design of a final focus system that will reliably provide the desired beam size for collisions

Rock quality designation of the hydraulic properties in the near field of a final repository for spent nuclear fuel

International Nuclear Information System (INIS)

Carlsson, Hans; Carlsson, Leif; Pusch, Roland

1989-06-01

Quality assurance of a final repository for spent nuclear fuel requires detailed information on the characteristics of the rock, backfill, canisters and the waste itself. Furthermore, and of fundamental importance, is the knowledge of the behaviour of the integrated system of the waste and the different barriers. The in-situ characteristics of the rock must therefore be assessed and their influence on and interactions with the remaining barriers must be predicted and verified. A rock quality designation process of the hydraulic properties in the near-field is out-lined both for the KBS-3 system as well as for the WP-cave system. The process, once updated and approved, will be included in a Quality Assurance Program for the final repository for spent nuclear fuel. Some of the available methods for the near-field designation process are presented as well as techniques that need further development or are not developed at all. Finally, a presentation is given of a generic designation process of the KBS-3 and WP-cave repository systems in the previously investigated area in Central Sweden, where the final repository for reactor waste, SFR, is located. Geological and hydrogeological data are here at hand and it is therefore possible to carry out a simulation of how the designation process would be accomplished. (authors) (72 figs., 12 tabs., 43 refs.)

Early Childhood Educators' Meta-Cognitive Knowledge of Problem-Solving Strategies and Quality of Childcare Curriculum Implementation

Science.gov (United States)

Kim, Yeon Ha

2016-01-01

This study aims to explore the impact of early childhood educators' meta-cognitive knowledge on the quality of their childcare curriculum implementation, and to gain insights regarding successful problem-solving strategies associated with early education and care. Early childhood educators' implementation of general problem-solving strategies in…

75 FR 10207 - Certain Cut-to-Length Carbon-Quality Steel Plate From the Republic of Korea: Final Results of...

Science.gov (United States)

2010-03-05

...-Quality Steel Plate From the Republic of Korea: Final Results of Antidumping Duty Administrative Review... cut-to-length carbon-quality steel plate from the Republic of Korea and the intent to rescind the... 1, 2008, through January 31, 2009. We have rescinded the review with respect to one company and we...

Effects of stress management training and problem solving on quality of life and life expectancy among infertile women

Directory of Open Access Journals (Sweden)

Mohammad Reza Zarbakhsh Bahri

2013-08-01

Full Text Available Introduction: This study aims to evaluate the effectiveness of stress management training and problem-solving training on quality of life and life expectancy of infertile women was conducted.Material and Methods: The method of this study was experimental with pretest – posttest design with a control group. population of 400 infertile women who referred to infertility center in Rasht were randomized to 250 of them were selected and the quality of life and life expectancy of the study were the 45 members of the quality of life and life expectancy lower were more randomly in three groups of 15 people, including two experimental groups and one control group were replaced. Each experimental groups were trained for 10 sessions of 90 minutes, respectively, stress management and problem-solving. Upon completion of the training program, participants were assessed again.Results: The result of present study showed that there was a significant difference between the experimental groups and control group in the scores of quality of life and life expectancy (p0.05.Conclusion: Stress management and problem solving training were effective on life expectancy and quality of life of infertile women but there was no significant difference between the effectiveness of these two methods on life expectancy and quality of life of infertile women.

International Standard Problem 40 - Aerosol Deposition and Resuspension. Final Comparison Report

International Nuclear Information System (INIS)

De Los Reyes, Alfredo Castelo; Areia Capitao, Joaquim; De Santi, Giovanni

1999-02-01

-October 1997 and the deadline for submission of the results of this second phase was the end of January 1998. A first draft of this comparison report was produced in March 1998, followed by a workshop in Ispra in mid-March. Two errors in the supplied data had been detected and were communicated to the participants in this workshop, one concerning the steam flow rate in the deposition phase of the exercise and the other the size distribution of the resuspended aerosols in the resuspension phase. The decision whether or not to re-do their calculations was left to the each ISP participant and the deadline for the submission of new results, with these or other modifications relative to the previous ones, was the end of May 1998. These new calculations, having been performed in open conditions, are presented separately in this report. The final draft of the comparison report was distribute in June 1998, followed by a final workshop in Ispra the same month. This report is divided into six main sections, one concerning the experimental set-up and results, two each for the deposition and resuspension phases of the International Standard Problem (blind and open calculations), and one on general conclusions and recommendations. According to the opinion of the ISP participants, the results in the two sections on the deposition and resuspension exercises are listed by computer code and, for each code, by organisation. The calculations submitted by the Joint Research Centre are included together with the others. Although the JRC staff who performed the calculations did not have access to the experimental results before submitting their results, their knowledge of the facility puts their calculations in a separate class

Medicare and Medicaid programs: Hospital Outpatient Prospective Payment and Ambulatory Surgical Center Payment Systems and Quality Reporting Programs; electronic reporting pilot; Inpatient Rehabilitation Facilities Quality Reporting Program; revision to Quality Improvement Organization regulations. Final rule with comment period.

Science.gov (United States)

2012-11-15

This final rule with comment period revises the Medicare hospital outpatient prospective payment system (OPPS) and the Medicare ambulatory surgical center (ASC) payment system for CY 2013 to implement applicable statutory requirements and changes arising from our continuing experience with these systems. In this final rule with comment period, we describe the changes to the amounts and factors used to determine the payment rates for Medicare services paid under the OPPS and those paid under the ASC payment system. In addition, this final rule with comment period updates and refines the requirements for the Hospital Outpatient Quality Reporting (OQR) Program, the ASC Quality Reporting (ASCQR) Program, and the Inpatient Rehabilitation Facility (IRF) Quality Reporting Program. We are continuing the electronic reporting pilot for the Electronic Health Record (EHR) Incentive Program, and revising the various regulations governing Quality Improvement Organizations (QIOs), including the secure transmittal of electronic medical information, beneficiary complaint resolution and notification processes, and technical changes. The technical changes to the QIO regulations reflect CMS' commitment to the general principles of the President's Executive Order on Regulatory Reform, Executive Order 13563 (January 18, 2011).

REDUCTION OF MORTADELLA COOKING TIME AND EVALUATION OF THE FINAL PRODUCT QUALITY

Directory of Open Access Journals (Sweden)

Diones Orsolin

2015-10-01

Full Text Available In food industry, the cooking is one of the most important processes for the conservation and quality assurance of the final product, especially mortadella. However, this process requires high investment in modern equipment besides having energy and steam expenses.. In this context, the objective of this study was to propose a cooking method of mortadella produced with pork and chicken, by reducing time and increasing temperature inside the baking oven. Evaluations of behavior of water activity, pH and texture of the mortadella were carried out throughout shelf life. From the results, we found that both pork and chicken mortadella that were cooked by the current process and those that passed through the cooking process with reduced time showed no significant differences at the level of 95% confidence for the analyzed characteristics. Therefore, all treatments had similar values and can be considered within the established standards of product quality for both water activity and for pH and texture.

77 FR 64473 - Circular Welded Carbon-Quality Steel Pipe From the Sultanate of Oman: Final Affirmative...

Science.gov (United States)

2012-10-22

...-Quality Steel Pipe From the Sultanate of Oman: Final Affirmative Countervailing Duty Determination AGENCY... Sultanate of Oman (``Oman''). DATES: Effective Date: October 22, 2012. FOR FURTHER INFORMATION CONTACT... Sultanate of Oman (``GSO'') on April 5, April 20, and May 10, 2012. We received the GSO's responses...

A study with ESI PAM-STAMP® on the influence of tool deformation on final part quality during a forming process

Science.gov (United States)

Vrolijk, Mark; Ogawa, Takayuki; Camanho, Arthur; Biasutti, Manfredi; Lorenz, David

2018-05-01

As a result from the ever increasing demand to produce lighter vehicles, more and more advanced high-strength materials are used in automotive industry. Focusing on sheet metal cold forming processes, these materials require high pressing forces and exhibit large springback after forming. Due to the high pressing forces deformations occur in the tooling geometry, introducing dimensional inaccuracies in the blank and potentially impact the final springback behavior. As a result the tool deformations can have an impact on the final assembly or introduce cosmetic defects. Often several iterations are required in try-out to obtain the required tolerances, with costs going up to as much as 30% of the entire product development cost. To investigate the sheet metal part feasibility and quality, in automotive industry CAE tools are widely used. However, in current practice the influence of the tool deformations on the final part quality is generally neglected and simulations are carried out with rigid tools to avoid drastically increased calculation times. If the tool deformation is analyzed through simulation it is normally done at the end of the drawing prosses, when contact conditions are mapped on the die structure and a static analysis is performed to check the deflections of the tool. But this method does not predict the influence of these deflections on the final quality of the part. In order to take tool deformations into account during drawing simulations, ESI has developed the ability to couple solvers efficiently in a way the tool deformations can be real-time included in the drawing simulation without high increase in simulation time compared to simulations with rigid tools. In this paper a study will be presented which demonstrates the effect of tool deformations on the final part quality.

Development of methods for evaluating options for improving air quality in Santiago, Chile and its environs. Final report

Energy Technology Data Exchange (ETDEWEB)

Williams, M.D.; Brown, M.J.

1993-10-01

Santiago, Chile has a serious air pollution problem. Aerosols reach very high levels and ozone exceeds US ambient standards on over 100 days a year. Chileans are very concerned about the poor air quality of Santiago and the effect of emissions from their copper smelters both near Santiago and at other sites. Officials from both the Santiago metropolitan air quality commission (La Comision Especial de Descontaminacion de le Region Metropolitana) and a government owned copper development company (La Empress Nacional de Mineria (ENAMI)) have asked for assistance to deal with the air quality problems in the city and associated with smelter emissions. This report describes the first steps in that effort. Santiago lies in a valley between a small coastal range to the west and the towering Andes to the cast. Air motion is greatly affected by the major topographical features which include the Pacific Ocean, the coastal range, and the Andes. In this first year of work the authors concentrated on gathering information on the meteorology, topography, and air quality of the metropolitan region. They examined two smelter sites and applied models to them to help their understanding and to provide assistance to ENAMI. One smelter, Ventanas, was located on the Pacific coast to the northwest of Santiago, while the other, Paipote, was located several hundred kilometers to the north. The Ventanas emissions may potentially affect Santiago air quality. Several advantages of working with the smelters in the first phase of the project are: (1) there is more monitoring in the vicinity of the smelters, (2) the development of a useful emission inventory is easier, (3) they pose a simpler problem of immediate interest whose resolution will provide an early benefit to the Chilean colleagues, and (4) the authors gain important experience as they prepare to delve deeper into Santiago`s air pollution problems.

Mapping online transportation service quality and multiclass classification problem solving priorities

Science.gov (United States)

Alamsyah, Andry; Rachmadiansyah, Imam

2018-03-01

Online transportation service is known for its accessibility, transparency, and tariff affordability. These points make online transportation have advantages over the existing conventional transportation service. Online transportation service is an example of disruptive technology that change the relationship between customers and companies. In Indonesia, there are high competition among online transportation provider, hence the companies must maintain and monitor their service level. To understand their position, we apply both sentiment analysis and multiclass classification to understand customer opinions. From negative sentiments, we can identify problems and establish problem-solving priorities. As a case study, we use the most popular online transportation provider in Indonesia: Gojek and Grab. Since many customers are actively give compliment and complain about company’s service level on Twitter, therefore we collect 61,721 tweets in Bahasa during one month observations. We apply Naive Bayes and Support Vector Machine methods to see which model perform best for our data. The result reveal Gojek has better service quality with 19.76% positive and 80.23% negative sentiments than Grab with 9.2% positive and 90.8% negative. The Gojek highest problem-solving priority is regarding application problems, while Grab is about unusable promos. The overall result shows general problems of both case study are related to accessibility dimension which indicate lack of capability to provide good digital access to the end users.

Associations of Perceived Sibling and Parent-Child Relationship Quality with Internalizing and Externalizing Problems: Comparing Indian and Dutch Early Adolescents

Science.gov (United States)

Buist, Kirsten L.; Verhoeven, Marjolein; Hoksbergen, René; ter Laak, Jan; Watve, Sujala; Paranjpe, Analpa

2017-01-01

The aims of the present study were (a) to examine whether Dutch and Indian early adolescents differ concerning sibling and parent-child relationship quality and externalizing and internalizing problems, and (b) to compare the associations between sibling and parent-child relationship quality and externalizing and internalizing problems for Indian…

Implications of Declining Enrolment for the Schools of Ontario. A Statement of Effects and Solutions. Final Report. [Incidences de la Baisse des Effectifs Scolaires sur les Ecoles de l'Ontario. Problemes et Solutions. Rapport Final].

Science.gov (United States)

Jackson, R. W. B.

In this final report concerning declining enrollments in Ontario, the problems are defined almost entirely in economic and financial terms, and the solutions expressed in those terms. The first section of the report briefly reviews the essential background, the economic and financial constraints, and finally the demographic facts. The arguments…

Dual-Readout Calorimetry for High-Quality Energy Measurements. Final Report

International Nuclear Information System (INIS)

Wigmans, Richard; Nural, Akchurin

2013-01-01

This document constitutes the final report on the project Dual-Readout Calorimetry for High-Quality Energy Measurements. The project was carried out by a consortium of US and Italian physicists, led by Dr. Richard Wigmans (Texas tech University). This consortium built several particle detectors and tested these at the European Center for Nuclear Research (CERN) in Geneva, Switzerland. The idea arose to use scintillating crystals as dual-readout calorimeters. Such crystals were of course already known to provide excellent energy resolution for the detection of particles developing electromagnetic (em) showers. The efforts to separate the signals from scintillating crystals into scintillation and Cerenkov components led to four different methods by which this could be accomplished. These methods are based on a) the directionality, b) spectral differences, c) the time structure, and d) the polarization of the signals

Sexual functioning, beliefs about sexual functioning and quality of life of women with infertility problems

Directory of Open Access Journals (Sweden)

Prathibha Agustus

2017-01-01

Full Text Available Background: The study was conducted in the background of paucity of studies examining the sexual and psychosocial functioning of women with infertility. Aims: The study explored sexual functioning in women with infertility problems, their beliefs about sexuality and their quality of life. Settings and Design: A single group exploratory design with non-probability purposive sampling was used. A total of 30 participants diagnosed with primary infertility were included in the study. Materials and Methods: The data were obtained by individual administration of the following tools: Semi-structured interview schedule, Female Sexual Functioning Inventory, Sexual Dysfunctional Beliefs Questionnaire, World Health Organization Quality of Life Scale − BREF Version and General Health Questionnaire-12. The data obtained were analyzed using descriptive statistics and non-parametric tests. Results: About half of the participants had sexual dysfunction. Pain-related problems were most commonly reported (50%. Factors contributing to dysfunction included inadequate knowledge about sex, sexual stimulation and sexual communication. Along with inadequate self-image, negative childhood experiences, financial difficulties and marital discord in parents influenced the perception of self. Majority of the women had dysfunctional beliefs about sexuality (56%, and greater beliefs were found to be in the domain of sexual conservatism. The overall quality of life was poor, and 56% of women experienced psychological distress. There was significant positive correlation between sexual conservatism and experience of pain and overall sexual functioning. Conclusion: Women with infertility bear dysfunctional beliefs and suffer from problems in sexual functioning, have low quality of life and high psychological distress.

Detection and Solution of Indoor Air Quality Problems in a Danish Town Hall

DEFF Research Database (Denmark)

Hyldgård, Carl-Erik; Brohus, Henrik

In connection with the research programme "Healthy Buildings", a building with indoor air quality problems was selected for further investigations. A Danish town hall was chosen because of many complaints over several years. A full-scale mock-up of a typical town hall office was built...... in the climate laboratory. A new heating and ventilating system and a new control strategy were chosen and implemented into the town hall. It was found that air supply upwards along a window may make it nearly impossible to achieve comfort and a good air quality the year round without full-scale measurements....

Data Quality Objectives for Regulatory Requirements for Dangerous Waste Sampling and Analysis; FINAL

International Nuclear Information System (INIS)

MULKEY, C.H.

1999-01-01

This document describes sampling and analytical requirements needed to meet state and federal regulations for dangerous waste (DW). The River Protection Project (RPP) is assigned to the task of storage and interim treatment of hazardous waste. Any final treatment or disposal operations, as well as requirements under the land disposal restrictions (LDRs), fall in the jurisdiction of another Hanford organization and are not part of this scope. The requirements for this Data Quality Objective (DQO) Process were developed using the RPP Data Quality Objective Procedure (Banning 1996), which is based on the U.S. Environmental Protection Agency's (EPA) Guidance for the Data Quality Objectives Process (EPA 1994). Hereafter, this document is referred to as the DW DQO. Federal and state laws and regulations pertaining to waste contain requirements that are dependent upon the composition of the waste stream. These regulatory drivers require that pertinent information be obtained. For many requirements, documented process knowledge of a waste composition can be used instead of analytical data to characterize or designate a waste. When process knowledge alone is used to characterize a waste, it is a best management practice to validate the information with analytical measurements

Differential susceptibility effects: the interaction of negative emotionality and sibling relationship quality on childhood internalizing problems and social skills.

Science.gov (United States)

Morgan, Judith K; Shaw, Daniel S; Olino, Thomas M

2012-08-01

Whereas socialization influences in early childhood have been linked to children's emerging internalizing problems and prosocial behavior, relatively few studies have examined how NE might moderate such associations in both advantageous and maladaptive ways. Furthermore, more research is needed to evaluate the impact of sibling relationships as an influential socialization influence on these child outcomes. In the current study we examined how NE might differentially moderate the associations between quality of relationships with siblings and both internalizing problems and social skills at school entry. NE moderated the effects of positive and destructive sibling relationship quality on child internalizing problems. Specifically, for boys high on NE, more positive sibling relationship quality predicted fewer internalizing problems, but more destructive sibling conflict predicted more internalizing problems. NE also moderated the effects of destructive sibling conflict on child social skills. For boys high on NE, destructive sibling conflict predicted fewer social skills. Boys high on NE appear to show greater susceptibility to the effects of sibling socialization on child outcomes, relative to boys low on NE. The implications of these interactions are discussed with respect to differential susceptibility theory.

Non-Conformitity in raw material: Quality problems and environmental impacts in a dairy processor in Paraná

Directory of Open Access Journals (Sweden)

Jacqueline Ruelis Fabbro

2012-12-01

Full Text Available Environmental management has been discussed by researchers and practitioners along recent years. Relations between quality and environmental issues have been treated, since quality problems interfere on environmental impacts. In dairy system, according to a report on dairy cleaner production by FIESP (2008, processors are concerned especially with rational use of water, energy saving techniques and equipment, use of less toxic raw materials, recycling, water and effluent treatment. Some studies have highlighted the importance of agriculture (milk producers when it comes to environmental problems along the chain, giving less relevance to dairy processing, packaging, consume phase and waste management. Thus, milk reception control in dairy companies is an important stage for environmental management. Considering the importance of coordination among agents, the aim of this paper was to analyze processor conduct concerning raw material non-conformity, linking quality and environmental issues. This qualitative research was accomplished through a study in a dairy plant in Paraná, which processes200,000 liters of milk per day and sells products nationally. The company works with 1,500 milk suppliers on average. Legal requirements are followed along the process, and ISO 1400 implementation in the company is in progress. According to interviews with quality supervisor and industrial manager, one of the most important critical point is milk reception, and a number of non-conformities are controlled. The presence of antibiotics is the most relevant of them, since it results in material rejection. Other problems, such as acidity and cryoscopy, are less critical, since it is possible to direct input to co-products. Interviewees informed that a low amount of milk is contaminated with antibiotics (about 1% of total input. Concerning antibiotic contamination, intensive training and constant visits have been developed with producers, especially to inform them

USE OF INTELLECTUAL TECHNOLOGIES FOR QUALITY CONTROL OF CURD

Directory of Open Access Journals (Sweden)

M. M. Blagoveshchenskaia

2014-01-01

Full Text Available Summary. Method of curds quality control, based on neural network model is introduced in the paper. It allows to give fair estimate of final product’s quality without use of professional degustators. Method consists in construction of neural network model to estimate quality of curds by input and output parameters. Hardware software complex of curds taste control is proposed to apply in industry for independent estimate of final product. Operation of neural network model based on usage of artificial neural networks, which is one of directions of artificial intelligence theory. Neural network model consists of several artificial neurons layers, which emulate nerve cells functioning. Feed forward network of MLP type was used in solving of curds taste control problem. Feature of this network is that signals passed from one layer’s neurons to next layer’s neurons only from input layer to output, not the other way. Neural network was trained for its correct operation by selection of optimal synaptic factors. Flow diagram of training algorithm is introduced in the paper. Algorithm of neural network tuning is described in the paper. Author proposed set of recommendations for software-hardware complex deployment. Experiment results show that this taste estimate method based on neural net works simplify a problem of final product control as allow to react to deviations in production process on proper time.

Model quality and safety studies

DEFF Research Database (Denmark)

Petersen, K.E.

1997-01-01

The paper describes the EC initiative on model quality assessment and emphasizes some of the problems encountered in the selection of data from field tests used in the evaluation process. Further, it discusses the impact of model uncertainties in safety studies of industrial plants. The model...... that most of these have never been through a procedure of evaluation, but nonetheless are used to assist in making decisions that may directly affect the safety of the public and the environment. As a major funder of European research on major industrial hazards, DGXII is conscious of the importance......-tain model is appropriate for use in solving a given problem. Further, the findings from the REDIPHEM project related to dense gas dispersion will be highlighted. Finally, the paper will discuss the need for model quality assessment in safety studies....

Sleep Characteristics, Sleep Problems, and Associations to Quality of Life among Psychotherapists.

Science.gov (United States)

Schlarb, Angelika A; Reis, Dorota; Schröder, Annette

2012-01-01

Sleep problems, especially insomnia, are a common complaint among adults. International studies have shown prevalence rates between 4.7 and 36.2% for sleep difficulties in general, whereas 13.1-28.1% report insomnia symptoms. Sleep problems are associated with lower social and academic performance and can have a severe impact on psychological and physical health. Psychotherapists are suppliers within the public health system. The goal of this study was to outline sleep characteristics, prevalence of sleep problems, insomnia, and associations of quality of life among psychotherapists. A total of 774 psychotherapists (74.7% women; mean age 46 years) participated in the study. Sleep characteristics, sleep problems, well-being, life satisfaction and workload, as well as specific job demands, were assessed via a questionnaire. Analyses revealed that more than 4.2% of the surveyed psychotherapists have difficulties falling asleep, 12.7% often wake up in the night, and 26.6% feel tired, and 3.4% think that their interrupted sleep affects work performance. About 44.1% of them suffer from symptoms of insomnia. Path models showed that insomnia is significantly related to well-being and life satisfaction.

Sleep Characteristics, Sleep Problems, and Associations to Quality of Life among Psychotherapists

Directory of Open Access Journals (Sweden)

Angelika A. Schlarb

2012-01-01

Full Text Available Sleep problems, especially insomnia, are a common complaint among adults. International studies have shown prevalence rates between 4.7 and 36.2% for sleep difficulties in general, whereas 13.1–28.1% report insomnia symptoms. Sleep problems are associated with lower social and academic performance and can have a severe impact on psychological and physical health. Psychotherapists are suppliers within the public health system. The goal of this study was to outline sleep characteristics, prevalence of sleep problems, insomnia, and associations of quality of life among psychotherapists. A total of 774 psychotherapists (74.7% women; mean age 46 years participated in the study. Sleep characteristics, sleep problems, well-being, life satisfaction and workload, as well as specific job demands, were assessed via a questionnaire. Analyses revealed that more than 4.2% of the surveyed psychotherapists have difficulties falling asleep, 12.7% often wake up in the night, and 26.6% feel tired, and 3.4% think that their interrupted sleep affects work performance. About 44.1% of them suffer from symptoms of insomnia. Path models showed that insomnia is significantly related to well-being and life satisfaction.

Problem-solving and developing quality management methods and techniques on the example of automotive industry

Directory of Open Access Journals (Sweden)

Jacek Łuczak

2015-12-01

Full Text Available The knowledge about methods and techniques of quality management together with their effective use can be definitely regarded as an indication of high organisational culture. Using such methods and techniques in an effective way can be attributed to certain level of maturity, as far as the quality management system in an organisation is concerned. There is in the paper an analysis of problem-solving methods and techniques of quality management in the automotive sector in Poland. The survey was given to the general population, which in case of the study consisted of companies operating in Poland that had certified quality management systems against ISO/TS 16949. The results of the conducted survey and the conclusions of the author can show actual and potential OEM suppliers (both 1st and 2nd tier in which direction their strategies for development and improvement of quality management systems should go in order to be effective. When the universal character of methods and techniques used in the surveyed population of companies is taken into consideration, it can be assumed that the results of the survey are also universal for all organisations realising the TQM strategy. The results of the research confirmed that methods which are also the basis for creating key system documents are the most relevant ones, i.e. flowcharts and FMEA, and moreover process monitoring tools (SPC and problem solving methods -above all 8D.

Analysis of raw hams using SELDI-TOF-MS to predict the final quality of dry-cured hams

NARCIS (Netherlands)

Marcos, B.; Gou, P.; Serra, X.; Guardia, M.D.; Zhen, Z.Y.; Hortos, M.; Mach Casellas, N.; Pas, te M.F.W.; Keuning, E.; Kruijt, L.; Font I Furnols, M.; Arnau, J.

2013-01-01

The relationship between protein profiles of Gluteus medius (GM) muscles of raw hams obtained from 4 pure breed pigs (Duroc, Large White, Landrace, and Piétrain) with the final quality of the Semimembranosus and Biceps femoris muscles of dry-cured hams was investigated. As expected, Duroc hams

Evolutionary multi-objective optimization for software development teams building: a way of obtaining quality in the final product

Directory of Open Access Journals (Sweden)

Yasnalla Rivero Peña

2015-03-01

Full Text Available (Received: 2015/01/29 - Accepted: 2015/03/25In this research a mathematical model to approach the process of creating software development teams as a discrete multi-objective problem is proposed. The objectives considered are the level of competition and the level of utilization of professionals in the team. Given the complexity of the problem search space, the application of an approximate optimization method is proposed. Specifically, the genetic algorithm NSGA-II based on the concept of Pareto dominance was selected. This method was applied in six different scenarios in order to analyze the quality of the obtained solutions. In general we can say that the method is efficient and gets solutions (assignments of high quality.

Using ecotechnology to address water quality and wetland habitat loss problems in the Mississippi basin: a hierarchical approach.

Science.gov (United States)

Day, John W; Yañéz Arancibia, Alejandro; Mitsch, William J; Lara-Dominguez, Ana Laura; Day, Jason N; Ko, Jae-Young; Lane, Robert; Lindsey, Joel; Lomeli, David Zarate

2003-12-01

Human activities are affecting the environment at continental and global scales. An example of this is the Mississippi basin where there has been a large scale loss of wetlands and water quality deterioration over the past century. Wetland and riparian ecosystems have been isolated from rivers and streams. Wetland loss is due both to drainage and reclamation, mainly for agriculture, and to isolation from the river by levees, as in the Mississippi delta. There has been a decline in water quality due to increasing use of fertilizers, enhanced drainage and the loss of wetlands for cleaning water. Water quality has deteriorated throughout the basin and high nitrogen in the Mississippi river is causing a large area of hypoxia in the Gulf of Mexico adjacent to the Mississippi delta. Since the causes of these problems are distributed over the basin, the solution also needs to be distributed over the basin. Ecotechnology and ecological engineering offer the only ecologically sound and cost-effective method of solving these problems. Wetlands to promote nitrogen removal, mainly through denitrification but also through burial and plant uptake, offer a sound ecotechnological solution. At the level of the Mississippi basin, changes in farming practices and use of wetlands for nitrogen assimilation can reduce nitrogen levels in the River. There are additional benefits of restoration of wetland and riverine ecosystems, flood control, reduction in public health threats, and enhanced wildlife and fisheries. At the local drainage basin level, the use of river diversions in the Mississippi delta can address both problems of coastal land loss and water quality deterioration. Nitrate levels in diverted river water are rapidly reduced as water flows through coastal watersheds. At the local level, wetlands are being used to treat municipal wastewater. This is a cost-effective method, which results in improved water quality, enhanced wetland productivity and increased accretion. The

Maternal interaction quality moderates effects of prenatal maternal emotional symptoms on girls’ internalizing problems

NARCIS (Netherlands)

Endendijk, J. J.; de Bruijn, A.; van Bakel, H.J.A.; Wijnen, H.; Pop, V.J.M.; van Baar, A.L.

2017-01-01

The role of mother-infant interaction quality is studied in the relation between prenatal maternal emotional symptoms and child behavioral problems. Healthy pregnant, Dutch women (N = 96, M = 31.6, SD = 3.3) were allocated to the "exposed group" (n = 46), consisting of mothers with high levels of

Problem trap final repository. Social challenges concerning nuclear waste

International Nuclear Information System (INIS)

Brunnengraeber, Achim

2016-01-01

How is it possible that there is still no final storage facility in the entire world for highly radioactive waste from nuclear power stations? How is it possible that electricity has been generated by industrial-scale nuclear installations for decades without the issue of the disposal of nuclear waste having been resolved? The events in Chernobyl in 1986 and Fukushima in 2011 have made it blatantly obvious how risky this technology is and how important it is to keep humans and the environment at a safe distance from radioactivity. This anthology examines the technological, political, social and economic dimensions of the permanent disposal of nuclear waste. It provides an insight into the emergence of the problem and the people involved and their interests. It describes and analyses the changes that are taking place in Germany (for instance, in relation to the government's commission on nuclear repositories) and other countries with regard to how they handle nuclear waste. The book deals with both questions related to socio-technical aspects of the permanent disposal of nuclear waste and calls for the democratic need for participation and new ways of doing so, without which the search for a permanent disposal site will not bear fruit. This anthology presents a comprehensive discussion of the disposal of nuclear waste and the search for a permanent repository for it. Not only will students and teachers find it extremely useful, but so will any readers who are interested in its subject matter and wish to gain a more in-depth insight into it.

Coping, problem solving, depression, and health-related quality of life in patients receiving outpatient stroke rehabilitation.

Science.gov (United States)

Visser, Marieke M; Heijenbrok-Kal, Majanka H; Spijker, Adriaan Van't; Oostra, Kristine M; Busschbach, Jan J; Ribbers, Gerard M

2015-08-01

To investigate whether patients with high and low depression scores after stroke use different coping strategies and problem-solving skills and whether these variables are related to psychosocial health-related quality of life (HRQOL) independent of depression. Cross-sectional study. Two rehabilitation centers. Patients participating in outpatient stroke rehabilitation (N=166; mean age, 53.06±10.19y; 53% men; median time poststroke, 7.29mo). Not applicable. Coping strategy was measured using the Coping Inventory for Stressful Situations; problem-solving skills were measured using the Social Problem Solving Inventory-Revised: Short Form; depression was assessed using the Center for Epidemiologic Studies Depression Scale; and HRQOL was measured using the five-level EuroQol five-dimensional questionnaire and the Stroke-Specific Quality of Life Scale. Independent samples t tests and multivariable regression analyses, adjusted for patient characteristics, were performed. Compared with patients with low depression scores, patients with high depression scores used less positive problem orientation (P=.002) and emotion-oriented coping (Pproblem orientation (Pproblem orientation was independently related to psychosocial HRQOL (β=.086; P=.018) and total HRQOL (β=.058; P=.031). Patients with high depression scores use different coping strategies and problem-solving skills than do patients with low depression scores. Independent of depression, positive problem-solving skills appear to be most significantly related to better HRQOL. Copyright © 2015 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Organic pork: Consumer quality perception: Final report

DEFF Research Database (Denmark)

Scholderer, Joachim; Nielsen, Niels Asger; Bredahl, Lone

2004-01-01

Previous research indicates that consumers expect substantially higher eating quality in pork that was produced in organic and free-range systems. Sensory studies and comparisons of objective quality suggest that these expectations are not completely realistic: in most cases, the performance...... of organic and free-range pork is equal to, and in some times even lower than that of conventional pork. However, consumers' expectations may be so strong that they may override differences in experienced quality. An experiment was conducted with 185 consumers to separate these effects and estimate...... were (a) organic pork, (b) free-range pork, (c) conventional pork, and (d) no information. Samples were prepared at a sensory lab following a standardised protocol. Serial positions of samples were counterbalanced across subjects. Before tasting each sample, consumers rated expected quality. After...

Decreased health-related quality of life in patients with diabetic foot problems

Directory of Open Access Journals (Sweden)

Sothornwit J

2018-03-01

Full Text Available Jin Sothornwit,1 Gulapar Srisawasdi,2 Atchara Suwannakin,2 Apiradee Sriwijitkamol1 1Division of Endocrinology and Metabolism, Department of Medicine, Faculty of Medicine Siriraj Hospital, Mahidol University, Bangkok Noi, Bangkok, Thailand; 2Foot Clinic, Department of Rehabilitation Medicine, Faculty of Medicine Siriraj Hospital, Mahidol University, Bangkok Noi, Bangkok, Thailand Purpose: The aim of this study was to investigate health-related quality of life (HRQoL in patients with diabetic foot problems and compare the HRQoL between diabetic patients with: 1 diabetic foot problems (DF, including diabetic foot ulcer (DFU or amputation (AMPU; 2 other diabetic complications (COM, such as diabetic retinopathy (DR, end-stage renal disease (ESRD, or coronary artery disease (CAD; and 3 no diabetic complication (CON.Patients and methods: A total of 254 diabetic patients were studied in a cross-sectional setting. HRQoL was evaluated using Thai version of the Euro Quality of Life Questionnaire (EuroQoL, with five dimensions and five-level scale (EQ-5D-5L. Utility scores were calculated using time trade-off methods.Results: A total of 141 patients in the DF group (98 DFU and 43 AMPU groups, 82 in the COM group (27 DR, 28 ESRD, and 27 CAD groups, and 31 in the CON group were interviewed. The mean age was 63.2±12.1 years, body mass index was 24.9±4.7 kg/m2, mean hemoglobin A1c was 7.7±2.1%, duration of diabetes was 13.1±9.9 years, and the mean utility scores were 0.799±0.25. After having DF, 21% of patients had lost their jobs. The COM group had lower utility scores than the CON group. Among the diabetic complications, the DF group had the lowest mean utility scores as compared to the COM and CON groups (0.703±0.28 in the DF group, 0.903±0.15 in the COM group, and 0.961±0.06 in the CON group, P<0.01. There was no difference in the mean utility scores between DFU and AMPU groups. Patients in the DF group reported moderate-to-severe problem in all

Problem of data quality and the limitations of the infrastructure approach

Science.gov (United States)

Behlen, Fred M.; Sayre, Richard E.; Rackus, Edward; Ye, Dingzhong

1998-07-01

The 'Infrastructure Approach' is a PACS implementation methodology wherein the archive, network and information systems interfaces are acquired first, and workstations are installed later. The approach allows building a history of archived image data, so that most prior examinations are available in digital form when workstations are deployed. A limitation of the Infrastructure Approach is that the deferred use of digital image data defeats many data quality management functions that are provided automatically by human mechanisms when data is immediately used for the completion of clinical tasks. If the digital data is used solely for archiving while reports are interpreted from film, the radiologist serves only as a check against lost films, and another person must be designated as responsible for the quality of the digital data. Data from the Radiology Information System and the PACS were analyzed to assess the nature and frequency of system and data quality errors. The error level was found to be acceptable if supported by auditing and error resolution procedures requiring additional staff time, and in any case was better than the loss rate of a hardcopy film archive. It is concluded that the problem of data quality compromises but does not negate the value of the Infrastructure Approach. The Infrastructure Approach should best be employed only to a limited extent, and that any phased PACS implementation should have a substantial complement of workstations dedicated to softcopy interpretation for at least some applications, and with full deployment following not long thereafter.

Placebo Problem In Acupuncture Studies and Interventions to Increase Report Quality

Directory of Open Access Journals (Sweden)

H. Volkan Acar

2012-07-01

Full Text Available Studies for acupuncture that has been used as a medical therapeutic method for thousands of years in Far East, is being increased in Western world. In parallel to this increase, there raised several methodologic problems. The most important one of these is the choice of control procedure. If a valid and credible control method has not been chosen, these ‘placebo acupuncture’ or ‘sham acupuncture’ controls could make a negative impact on the study results. In this paper, these different sham acupuncture methods are dis-cussed to find an optimal control procedure. The second major problem which was encountered with acupuncture studies is related with the reporting of interventions. Like CONSORT checklist in conventional medicine, STRICTA recommendations list is prepared for the controlled acupuncture trials. In conclusion, to choose a valid and credible control procedure and to follow CONSORT checklist and STRICTA recommendations will improve the quality of acupuncture studies.

Study on the Application of 6σ Method in Shoemaking Enterprise Quality Improvement

Directory of Open Access Journals (Sweden)

Wang Ting

2017-01-01

Full Text Available With the development of science as well as technology and the influx of shoemaking companies abroad, our traditional shoemaking enterprises face greater pressure to survive, and product quality problems are in urgent need of improvement. Aiming at the quality problems of M shoemaking enterprise, DMAIC method is used to conduct the product quality improvement, and a mathematical statistics software Minitab is used to analyze the data. Moreover, the optimum combination of the key influencing factors is determined by orthogonal experiment design as well as a set of specific quality improvement plans are put forward. Finally, the production process capability of M enterprise is improved, the product bonding strength is enhanced, customer satisfaction is improved, and the thoughts of product quality improvement and reference are provided for domestic traditional shoemaking enterprises.

ACTUAL PROBLEMS OF THE THEORY OF QUALITY

OpenAIRE

V. P. Panasyuk; A. Lymar

2016-01-01

The aim of the publication is the analysis of the place and the role of scientific categories and application of the concept of «quality» as a threepronged science of quality, quality management, quality assessment in contemporary global processes, as well as applied aspects with regard to the adoption of specific management decisions.Methods. Methodology of interdisciplinary approach to the analysis of the "quality" category is used; the methods of theoretical analysis, synthesis and general...

Problem Solving in the Presence of Others: How Rank and Relationship Quality Impact Resource Acquisition in Chimpanzees (Pan troglodytes)

Science.gov (United States)

Cronin, Katherine A.; Pieper, Bridget A.; van Leeuwen, Edwin J. C.; Mundry, Roger; Haun, Daniel B. M.

2014-01-01

In the wild, chimpanzees (Pan troglodytes) are often faced with clumped food resources that they may know how to access but abstain from doing so due to social pressures. To better understand how social settings influence resource acquisition, we tested fifteen semi-wild chimpanzees from two social groups alone and in the presence of others. We investigated how resource acquisition was affected by relative social dominance, whether collaborative problem solving or (active or passive) sharing occurred amongst any of the dyads, and whether these outcomes were related to relationship quality as determined from six months of observational data. Results indicated that chimpanzees obtained fewer rewards when tested in the presence of others compared to when they were tested alone, and this loss tended to be greater when paired with a higher ranked individual. Individuals demonstrated behavioral inhibition; chimpanzees who showed proficient skill when alone often abstained from solving the task when in the presence of others. Finally, individuals with close social relationships spent more time together in the problem solving space, but collaboration and sharing were infrequent and sessions in which collaboration or sharing did occur contained more instances of aggression. Group living provides benefits and imposes costs, and these findings highlight that one cost of group living may be diminishing productive individual behaviors. PMID:24695486

Problem solving in the presence of others: how rank and relationship quality impact resource acquisition in chimpanzees (Pan troglodytes.

Directory of Open Access Journals (Sweden)

Katherine A Cronin

Full Text Available In the wild, chimpanzees (Pan troglodytes are often faced with clumped food resources that they may know how to access but abstain from doing so due to social pressures. To better understand how social settings influence resource acquisition, we tested fifteen semi-wild chimpanzees from two social groups alone and in the presence of others. We investigated how resource acquisition was affected by relative social dominance, whether collaborative problem solving or (active or passive sharing occurred amongst any of the dyads, and whether these outcomes were related to relationship quality as determined from six months of observational data. Results indicated that chimpanzees obtained fewer rewards when tested in the presence of others compared to when they were tested alone, and this loss tended to be greater when paired with a higher ranked individual. Individuals demonstrated behavioral inhibition; chimpanzees who showed proficient skill when alone often abstained from solving the task when in the presence of others. Finally, individuals with close social relationships spent more time together in the problem solving space, but collaboration and sharing were infrequent and sessions in which collaboration or sharing did occur contained more instances of aggression. Group living provides benefits and imposes costs, and these findings highlight that one cost of group living may be diminishing productive individual behaviors.

Photovoltaic module quality in the Kenyan solar home systems market

International Nuclear Information System (INIS)

Duke, R.D.; Jacobson, A.; Kammen, D.M.

2002-01-01

As one of the largest unsubsidized markets for solar home systems (SHSs) in the world, Kenya represents a promising model for rural electrification based on private purchases of clean decentralized photovoltaic technologies. Small amorphous-silicon modules dominate the market and most brands provide high quality and affordable service. Product quality varies widely, however, and the public has limited capacity to distinguish among competing brands. This imposes direct hardships on households with the misfortune to purchase low-quality equipment, and it constrains sales as some customers refrain from purchasing solar equipment due to the associated performance uncertainty. This article analyzes market failure associated with photovoltaic module quality in the Kenyan SHS market and develops strategies to address the problem - emphasizing that similar quality problems may exist for other SHS components and in other markets. The principal conclusion is that domestic product testing with public disclosure represents an inexpensive low-risk strategy, but it may prove inadequate. Mandatory product quality standards based on international testing regimes (e.g. IEC standards), augmented with a basic domestic testing option, would provide stronger assurance, but the risks associated with this intervention suggest caution. An emerging multilateral SHS market support effort (PVMTI) should ensure quality for the credit-based sales it promotes in Kenya; however, the long-term impact of this approach is not yet clear and it is unlikely to address quality problems associated with the unsubsidized sales-based markets for SHSs. Finally, fee-for-service models would decisively address quality problems, but launching this model in the Kenyan market would likely require large subsidies. (author)

Development of Management Quality Assessment Methodology in the Public Sector: Problems and Contradictions

Directory of Open Access Journals (Sweden)

Olga Vladimirovna Kozhevina

2015-09-01

Full Text Available The development management quality assessment methodology in the public sector is relevant scientific and practical problem of economic research. The utilization of the results of the assessment on the basis of the authors’ methodology allows us to rate the public sector organizations, to justify decisions on the reorganization and privatization, and to monitor changes in the level of the management quality of the public sector organizations. The study determined the place of the quality of the control processes of the public sector organization in the system of “Quality of public administration — the effective operation of the public sector organization,” the contradictions associated with the assessment of management quality are revealed, the conditions for effective functioning of the public sector organizations are proved, a mechanism of comprehensive assessment and algorithm for constructing and evaluating the control models of management quality are developed, the criteria for assessing the management quality in the public sector organizations, including economic, budgetary, social and public, informational, innovation and institutional criteria are empirically grounded. By utilizing the proposed algorithm, the assessment model of quality management in the public sector organizations, including the financial, economic, social, innovation, informational and institutional indicators is developed. For each indicator of quality management, the coefficients of importance in the management quality assessment model, as well as comprehensive and partial evaluation indicators are determined on the basis of the expert evaluations. The main conclusion of the article is that management quality assessment for the public sector organizations should be based not only on the indicators achieved in the dynamics and utilized for analyzing the effectiveness of management, but also should take into account the reference levels for the values of these

QUALITY MANAGEMENT: EFFORTS AND PROBLEMS IN ...

African Journals Online (AJOL)

improvements in information flow capabilities, have made competition ... economic globalization has an impact both on developed .... should apply quality control to improve their output. Second ... After the quality management system has Inatured .... internal standardization into consideration. In 1998, The Ethiopia Standard.

Indoor Air Quality Problem Solving Tool

Science.gov (United States)

Use the IAQ Problem Solving Tool to learn about the connection between health complaints and common solutions in schools. This resource provides an easy, step-by-step process to start identifying and resolving IAQ problems found at your school.

Common issues raised during the quality assurance process of WHO guidelines: a cross-sectional study.

Science.gov (United States)

Porgo, Teegwendé V; Ferri, Mauricio; Norris, Susan L

2018-02-07

In 2007, WHO established the Guidelines Review Committee (GRC) to ensure that WHO guidelines adhere to the highest international standards. The GRC reviews guideline proposals and final guidelines. The objectives of this study were to examine the rates of and reasons for conditional approval and non-approval of documents submitted for the first time to the GRC, and calculate the time intervals and numbers of submissions to achieve approval for documents conditionally approved or not approved at first submission. All initial submissions to the GRC between 2014 and 2017 were examined. Data were extracted from the GRC's records of written comments and discussions. Of a total of 85 proposals and 88 final guidelines, 32 (37.6%) proposals and 37 (42.0%) final guidelines were conditionally approved, and 15 (17.6%) proposals and 28 (31.8%) final guidelines were not. For both conditionally approved and not approved proposals, the most frequent reasons were suboptimal composition or inadequate description of the guideline contributor groups (in all proposals), followed by inadequate formulation of key questions (in 90.6% of conditionally approved proposals and all not approved proposals). For both conditionally approved and not approved final guidelines, the most frequent reasons were problems with recommendations (in all final guidelines), followed by inappropriate methods for evidence retrieval or an inadequate description thereof (in all conditionally approved final guidelines and 75.0% of not approved final guidelines). The median time to achieve approval was 2 months for proposals and 1-2 months for final guidelines. The median number of submissions was 2 for proposals and 2-2.5 for final guidelines. The GRC implements a rigorous quality assurance process and identifies problems with a significant percentage of initial submissions. WHO needs to continuously evaluate its guideline development processes to inform effective quality improvement measures and optimise the

Quality indicators in radiotherapy

International Nuclear Information System (INIS)

Cionini, Luca; Gardani, Gianstefano; Gabriele, Pietro; Magri, Secondo; Morosini, Pier Luigi; Rosi, Antonella; Viti, Vincenza

2007-01-01

Background and purpose: There is a widespread and increasing tendency to develop hospital performance indicators in the field of accreditation/certification systems and quality benchmarking. A study has been undertaken to develop a set of performance indicators for a typical radiotherapy Centre and to evaluate their ability to provide a continuous quality improvement. Materials and methods: A working group consisting of radiation oncologists, medical physicists and radiation technologists under the coordination of experts in health technology assessment has elaborated a set of general indicators able to monitor performances and the quality level of a typical radiotherapy Centre. The work has been carried out through four steps: a preliminary set of indicators was selected; data on these indicators were collected in a number of Italian radiotherapy Centres and medical physics Services; problems in collection and analysis of data were discussed; a final set of indicators was developed. Results: A final set of 13 indicators is here presented. They concern general structural and/or operational features, health physics activities and accuracy and technical complexity of the treatment. Conclusions: The indicators tested in a few Italian Centres of radiotherapy and medical physics Services are now ready to be utilized by a larger community

Comparison of Decisions Quality of Heuristic Methods with Limited Depth-First Search Techniques in the Graph Shortest Path Problem

Directory of Open Access Journals (Sweden)

Vatutin Eduard

2017-12-01

Full Text Available The article deals with the problem of analysis of effectiveness of the heuristic methods with limited depth-first search techniques of decision obtaining in the test problem of getting the shortest path in graph. The article briefly describes the group of methods based on the limit of branches number of the combinatorial search tree and limit of analyzed subtree depth used to solve the problem. The methodology of comparing experimental data for the estimation of the quality of solutions based on the performing of computational experiments with samples of graphs with pseudo-random structure and selected vertices and arcs number using the BOINC platform is considered. It also shows description of obtained experimental results which allow to identify the areas of the preferable usage of selected subset of heuristic methods depending on the size of the problem and power of constraints. It is shown that the considered pair of methods is ineffective in the selected problem and significantly inferior to the quality of solutions that are provided by ant colony optimization method and its modification with combinatorial returns.

Comparison of Decisions Quality of Heuristic Methods with Limited Depth-First Search Techniques in the Graph Shortest Path Problem

Science.gov (United States)

Vatutin, Eduard

2017-12-01

The article deals with the problem of analysis of effectiveness of the heuristic methods with limited depth-first search techniques of decision obtaining in the test problem of getting the shortest path in graph. The article briefly describes the group of methods based on the limit of branches number of the combinatorial search tree and limit of analyzed subtree depth used to solve the problem. The methodology of comparing experimental data for the estimation of the quality of solutions based on the performing of computational experiments with samples of graphs with pseudo-random structure and selected vertices and arcs number using the BOINC platform is considered. It also shows description of obtained experimental results which allow to identify the areas of the preferable usage of selected subset of heuristic methods depending on the size of the problem and power of constraints. It is shown that the considered pair of methods is ineffective in the selected problem and significantly inferior to the quality of solutions that are provided by ant colony optimization method and its modification with combinatorial returns.

Health-related quality of life, cognitive functioning and behaviour problems in children with Langerhans cell histiocytosis

NARCIS (Netherlands)

Vrijmoet-Wiersma, C. M. Jantien; Kooloos, Vicky M.; Koopman, Hendrik M.; Kolk, Annemarie M.; van der Laan, Ingrid; Grootenhuis, Martha A.; Egeler, R. Maarten

2009-01-01

BACKGROUND: This study was designed to evaluate generic and disease-specific health-related quality of life (HRQoL), cognitive functioning and behaviour problems of children with Langerhans Cell Histiocytosis (LCH). Furthermore, we investigated which medical determinants and social demographic

STRATEGY AND EVALUATION OF THE OPERATION OF QUALITY MANAGEMENT SYSTEMS MEDICAL EDUCATION. THE FIRST MESSAGE. PROBLEM FORMULATION

Directory of Open Access Journals (Sweden)

O. P. Mintser

2015-09-01

Full Text Available The article is devoted to functioning of the quality management by ISO 9001 standard. The problem of inefficient and non-working systems is pointed out, the causes of their inefficiency are investigated. The phenomenon of simultaneous existence of two parallel management systems: formal quality management system and living systems of managerial decisions making is studied. To study this situation the measure of «efficiency of quality management system» is introduced; further tasks for creating indicators and mechanisms for its evaluation are defined.

The quality-value proposition in health care.

Science.gov (United States)

Feazell, G Landon; Marren, John P

2003-01-01

Powerful forces are converging in US health care to finally cause recognition of the inherently logical relationship between quality and money. The forces, or marketplace "drivers," which are converging to compel recognition of the relationship between cost and quality are: (1) the increasing costs of care; (2) the recurrence of another medical malpractice crisis; and (3) the recognition inside and outside of health care that quality is inconsistent and unacceptable. It is apparent that hospital administrators, financial officers, board members, and medical staff leadership do not routinely do two things: (1) relate quality to finance; and (2) appreciate the intra-hospital structural problems that impede quality attainment. This article discusses these factors and offers a positive method for re-structuring quality efforts and focusing the hospital and its medical staff on quality. The simple but compelling thesis of the authors is that health care must immediately engage in the transformation to making quality of medical care the fundamental business strategy of the organization.

[Current situations and problem analysis of influencing factors of traditional Chinese medicine tablets on forming quality].

Science.gov (United States)

Li, Yan-Nian; Wu, Zhen-Feng; Wan, Na; Li, Yuan-Hui; Li, Hui-Ting; Yang, Ming

2018-04-01

The compressibility of tablets is the essential operating unit during the preparation of traditional Chinese medicine tablets, as well as a complicated process. Therefore, it is of great significance to comprehensively study the influencing factors on the formation process. This paper aimed to review the evaluation methods for the tablet forming quality and highlight the effects of material powder properties, excipients and preparation technology on the quality of traditional Chinese medicine tablets on the basis of relevant literatures. Furthermore, the common problems in tablet forming process are also analyzed to provide useful references for the development of tablet forming quality of traditional Chinese medicines. Copyright© by the Chinese Pharmaceutical Association.

Final Approval of California Air Plan Revision; Antelope Valley Air Quality Management District; VOCs From Motor Vehicle Assembly Coating Operations

Science.gov (United States)

EPA is taking final action to approve a revision to the Antelope Valley Air Quality Management District (AVAQMD) portion of the California SIP concerning the emissions of volatile organic compounds (VOCs) from motor vehicle assembly coating operations.

Problem of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks

International Nuclear Information System (INIS)

Shorikov, A. F.

2015-01-01

This article discusses a discrete-time dynamical system consisting of a set a controllable objects (region and forming it municipalities). The dynamics each of these is described by the corresponding vector nonlinear discrete-time recurrent vector equations and its control system consist from two levels: basic (control level I) that is dominating and subordinate level (control level II). Both levels have different criterions of functioning and united a priori by determined informational and control connections defined in advance. In this paper we study the problem of optimization of guaranteed result for program control by the final state of regional social and economic system in the presence of risks. For this problem we proposed in this work an economical and mathematical model of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks and the general scheme for its solving

Problem of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks

Energy Technology Data Exchange (ETDEWEB)

Shorikov, A. F., E-mail: afshorikov@mail.ru [Ural Federal University, 19 S. Mira, Ekaterinburg, 620002, Russia Institute of Mathematics and Mechanics, Ural Branch of Russian Academy of Sciences, 16 S. Kovalevskaya, Ekaterinburg, 620990 (Russian Federation)

2015-11-30

This article discusses a discrete-time dynamical system consisting of a set a controllable objects (region and forming it municipalities). The dynamics each of these is described by the corresponding vector nonlinear discrete-time recurrent vector equations and its control system consist from two levels: basic (control level I) that is dominating and subordinate level (control level II). Both levels have different criterions of functioning and united a priori by determined informational and control connections defined in advance. In this paper we study the problem of optimization of guaranteed result for program control by the final state of regional social and economic system in the presence of risks. For this problem we proposed in this work an economical and mathematical model of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks and the general scheme for its solving.

Impact of the codec and various QoS methods on the final quality of the transferred voice in an IP network

International Nuclear Information System (INIS)

Slavata, Oldřich; Holub, Jan

2015-01-01

This paper deals with an analysis of the relation between the codec that is used, the QoS method, and the final voice transmission quality. The Cisco 2811 router is used for adjusting QoS. VoIP client Linphone is used for adjusting the codec. The criterion for transmission quality is the MOS parameter investigated with the ITU-T P.862 PESQ and P.863 POLQA algorithms

77 FR 64475 - Notice of Final Determination of Sales at Less Than Fair Value: Circular Welded Carbon-Quality...

Science.gov (United States)

2012-10-22

... Determination of Sales at Less Than Fair Value: Circular Welded Carbon-Quality Steel Pipe From the United Arab... be, sold in the United States at less than fair value (LTFV), as provided in section 735 of the... of Sales at Less Than Fair Value and Postponement of Final Determination, 77 FR 32539 (June 1, 2012...

Qualification, certification and training of quality assurance personnel

International Nuclear Information System (INIS)

Ribeiro da Costa, J.

1982-01-01

The qualification and certification of technical personnel for activities related to nuclear quality is one of the most critical problems in developing countries which use nuclear power for peaceful purposes. A careful analysis of industrial quality levels is required in order to determine existing weaknesses, to correct deviations and to regulate quality-related activities so that nuclear power programmes can be implemented with no difficulties other than those inherent in the very complexity of nuclear technology. In this connection, indoctrination, training and qualification of technical personnel, in line with the requirements to quality assurance (QA), are tasks which must be undertaken right at the outset, taking into account the country's stage of technological development, its objectives and the necessity to increase its direct participation in QA activities in the shortest possible time. The paper shows how the problem was approached in Brazil, beginning with an analysis of the situation of industry in this field, the evolution of QA training programmes through several stages, leading to systematic training in the field of nuclear quality and, finally, the introduction of training in the more specific and sophisticated field of nuclear reliability. (author)

Problems in Systematic Application of Software Metrics and Possible Solution

OpenAIRE

Rakic, Gordana; Budimac, Zoran

2013-01-01

Systematic application of software metric techniques can lead to significant improvements of the quality of a final software product. However, there is still the evident lack of wider utilization of software metrics techniques and tools due to many reasons. In this paper we investigate some limitations of contemporary software metrics tools and then propose construction of a new tool that would solve some of the problems. We describe the promising prototype, its internal structure, and then f...

A nationwide study of health-related quality of life, stress, pain or discomfort and the use of medicine among problem gamblers

DEFF Research Database (Denmark)

Ekholm, Ola; Davidsen, Michael; Larsen, Christina Viskum Lytken

2018-01-01

AIM: The aim of this study was to investigate the associations between problem gambling and health-related quality of life, stress, pain or discomfort and the use of analgesics and sleeping pills. METHODS: Data derives from the Danish Health and Morbidity Survey 2010. The survey was based......, high perception of stress, headache, fatigue and sleeping problems. Furthermore, previous problem gambling was generally associated with poorer health outcomes. Thus, current and previous problem gamblers had 2.36 times (95% confidence interval [CI] 1.44-3.87) and 1.66 times (95% CI 1.07-2.55) higher...... included topics such as health-related quality of life (Short Form-12), perceived stress, pain and discomforts within the past two weeks, as well as the use of medication within the past two weeks. RESULTS: Current problem gambling was strongly associated with negative outcomes such as poor mental health...

Associations of Perceived Sibling and Parent-Child Relationship Quality With Internalizing and Externalizing Problems: Comparing Indian and Dutch Early Adolescents

NARCIS (Netherlands)

Buist, K. L.|info:eu-repo/dai/nl/241099218; Verhoeven, Marjolein|info:eu-repo/dai/nl/304349747; Hoksbergen, R.|info:eu-repo/dai/nl/068229127; Ter Laak, J.; Watve, S.; Paranjpe, A.

2017-01-01

The aims of the present study were (a) to examine whether Dutch and Indian early adolescents differ concerning sibling and parent-child relationship quality and externalizing and internalizing problems, and (b) to compare the associations between sibling and parent-child relationship quality and

Problems of psychological monitoring in astronaut training.

Science.gov (United States)

Morgun, V V

1997-10-01

Monitoring of the goal-oriented psychological changes of a man during professional training is necessary. The level development of the astronaut psychic features is checked by means of psychological testing with the final aim to evaluate each professionally important psychological qualities and to evaluate in general. The list of psychological features needed for evaluation is determined and empirically selected weight factors based on wide statistical sampling is introduced. Accumulation of psychological test results can predict an astronaut's ability of solving complicated problems in a flight mission. It can help to correct the training process and reveal weakness.

Application of an Integrated Model with MCDM and IPA to Evaluate the Service Quality of Transshipment Port

Directory of Open Access Journals (Sweden)

Chien-Chang Chou

2013-01-01

Full Text Available It is often to solve complex decision-making problems in the marine transportation environment, such as the evaluation of service quality and the location choice of ports. In this paper, an integrated model with multiple-criteria decision making (MCDM and importance-performance analysis (IPA is presented and then is applied to solve the problem of service quality evaluation of transshipment port. The MCDM approach can be used to deal with both quantitative data and qualitative ratings simultaneously. The IPA approach can be applied to realize the shortcomings of service quality of ports and rank the ranking of strategies for improving service quality of transshipment port. Finally, some useful suggestions for improving the service quality of ports are given in the paper.

The role of marital quality and spousal support in behaviour problems of children with and without intellectual disability.

Science.gov (United States)

Wieland, Natalie; Baker, B L

2010-07-01

Children with intellectual disability (ID) have been found to be at an increased risk for developing behavioural problems. The purpose of this study was to examine the relationship between the marital domain, including marital quality and spousal support, and behaviour problems in children with and without ID. The relationship between the marital domain and child behaviour problems was examined in 132 families of 6-year-olds with and without ID. Using hierarchical regression, these relationships were also studied over time from child ages 6-8 years. Child behaviour problems were assessed with mother-reported Child Behavior Checklist. The marital domain was measured using the Dyadic Adjustment Scale-7 and the Spousal Support and Agreement Scale. Mother-reported parenting stress and observed parenting practices were tested as potential mediators of the relationship between the marital domain and child behaviour problems. Mean levels of the marital domain were not significantly different between typically developing (TD) and ID groups, but there were significantly greater levels of variance in reported marital quality in the ID group at ages 6, 7 and 8. The marital domain score at child age 6 years predicted child behaviour problems at age 8 for the TD group only. This predictive relationship appeared to be a unidirectional effect, as child behaviour problems at age 6 were not found to predict levels of the marital domain at age 8. Parenting stress partially mediated this relationship for the TD group. The marital domain may have a greater impact on behavioural outcomes for TD children. Implications for future research and interventions are discussed.

Problems of systems dataware using optoelectronic measuring means of linear displacement

Science.gov (United States)

Bazykin, S. N.; Bazykina, N. A.; Samohina, K. S.

2017-10-01

Problems of the dataware of the systems with the use of optoelectronic means of the linear displacement are considered in the article. The classification of the known physical effects, realized by the means of information-measuring systems, is given. The organized analysis of information flows in technical systems from the standpoint of determination of inaccuracies of measurement and management was conducted. In spite of achieved successes in automation of machine-building and instruments-building equipment in the field of dataware of the technical systems, there are unresolved problems, concerning the qualitative aspect of the production process. It was shown that the given problem can be solved using optoelectronic lazer information-measuring systems. Such information-measuring systems are capable of not only executing the measuring functions, but also solving the problems of management and control during processing, thereby guaranteeing the quality of final products.

Recording of measurement results und data evaluation in water quality. Final report. Pt. 1

International Nuclear Information System (INIS)

Hanisch, H.H.; Krahe, P.

1989-05-01

The report presented includes different hydrological contributions which deal predominantly with the possibilities of evaluating and representing water quality data with statistical and graphical methods, with the exception of the contributions on guidelines for oil barriers and calculations on the progression of a pollutant wave in the Rhine. Experience gained on the basis of practical examples shows that techniques and methods of data interpretation ought to be taken into consideration in measurement programmes in order to be able to attain problem-related results. (orig.). 123 figs., 3 tabs., 14 refs [de

Quality control process improvement of flexible printed circuit board by FMEA

Science.gov (United States)

Krasaephol, Siwaporn; Chutima, Parames

2018-02-01

This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

Relations of Parenting Quality, Interparental Conflict, and Overnights with Mental Health Problems of Children in Divorcing Families with High Legal Conflict

Science.gov (United States)

Sandler, Irwin N.; Wheeler, Lorey A.; Braver, Sanford L.

2013-01-01

The current study examined the associations between child mental health problems and the quality of maternal and paternal parenting, and how these associations were moderated by three contextual factors, quality of parenting by the other parent, interparental conflict, and the number of overnights parents had with the child. Data for the current study come from a sample of divorcing families who are in high legal conflict over developing or maintaining a parenting plan following divorce. Analyses revealed that the associations between child mental health problems and positive maternal and paternal parenting were moderated by the quality of parenting provided by the other parent and by the number of overnights children spent with parents, but not by the level of interparental conflict. When both parenting by the other parent and number of overnights were considered in the same model, only number of overnights moderated the relations between parenting and child behavior problems. The results support the proposition that the well-being of children in high conflict divorcing families is better when they spend adequate time with at least one parent who provides high quality parenting. PMID:24098960

Design and Optimization of Capacitated Supply Chain Networks Including Quality Measures

Directory of Open Access Journals (Sweden)

Krystel K. Castillo-Villar

2014-01-01

Full Text Available This paper presents (1 a novel capacitated model for supply chain network design which considers manufacturing, distribution, and quality costs (named SCND-COQ model and (2 five combinatorial optimization methods, based on nonlinear optimization, heuristic, and metaheuristic approaches, which are used to solve realistic instances of practical size. The SCND-COQ model is a mixed-integer nonlinear problem which can be used at a strategic planning level to design a supply chain network that maximizes the total profit subject to meeting an overall quality level of the final product at minimum costs. The SCND-COQ model computes the quality-related costs for the whole supply chain network considering the interdependencies among business entities. The effectiveness of the proposed solution approaches is shown using numerical experiments. These methods allow solving more realistic (capacitated supply chain network design problems including quality-related costs (inspections, rework, opportunity costs, and others within a reasonable computational time.

Understanding sleep problems in children with epilepsy: Associations with quality of life, Attention-Deficit Hyperactivity Disorder and maternal emotional symptoms.

Science.gov (United States)

Ekinci, Ozalp; Isik, Uğur; Gunes, Serkan; Ekinci, Nuran

2016-08-01

This study aimed to (1) compare sleep problems between children and adolescents with epilepsy and non-epileptic controls, and (2) examine whether there is an association between sleep problems and quality of life, Attention-Deficit Hyperactivity Disorder (ADHD) and mothers' emotional symptoms. Fifty-three patients from a cohort of epilepsy (aged 7-18 years) and 28 controls with minor medical problems (aged 7-18 years) were included. Parents completed Children's Sleep Habits Questionnaire (CSHQ) and Kinder Lebensqualitätsfragebogen: Children's Quality of Life Questionnaire-revised (KINDL-R) for patients and controls. Turgay DSM-IV Disruptive Behavior Disorders Rating Scale (T-DSM-IV-S) parent and teacher forms were used to assess ADHD symptoms for patients. Mothers of the patients completed Beck Depression Inventory and State-Trait Anxiety Inventory (STAI). Neurology clinic charts were reviewed for the epilepsy-related variables. Children with epilepsy had a higher CSHQ Total score than the control group. Those with a CSHQ score >56 (which indicates moderate to severe sleep problems) had lower scores on KINDL-R. Parent-rated T-DSM-IV-S Total and Hyperactivity-Impulsivity scores, STAI trait and Beck scores were found to be higher in those with a CSHQ score >56. Significant positive correlations were found between CSHQ Total score and T-DSM-IV-S, STAI trait and Beck scores. Binary logistic regression analysis revealed that T-DSM-IV-S Total, Inattention and Hyperactivity-Impulsivity scores were significantly associated with a higher CSHQ Total score. None of the epilepsy-related variables were found to be related with the CSHQ Total score. Among children with epilepsy, sleep problems lead to a poor quality of life. The link between sleep problems and psychiatric symptoms must be conceptualized as a bilateral relationship. ADHD appears to be the strongest predictor of sleep problems. Copyright © 2016 British Epilepsy Association. Published by Elsevier Ltd. All rights

An asthma-related quality of life instrument is unable to identify asthmatic children with major psychosocial problems.

NARCIS (Netherlands)

Tibosch, M.M.; Reidsma, C.; Landstra, A.; Hugen, C.A.C.; Gerrits, P.; Brouwer, M.; Gent, R. van; Merkus, P.J.F.M.; Verhaak, C.M.

2010-01-01

Evidence shows that psychosocial problems among children and adolescents with asthma interfere with adherence to treatment and therefore need attention in asthma care. It is unknown whether the already frequently implemented asthma-related quality of life (QoL) instruments reflect psychosocial

SIMULATION OF QUALITY GOALS: A MISSING LINK BETWEEN CORPORATE STRATEGY AND BUSINESS PROCESS MANAGEMENT

Directory of Open Access Journals (Sweden)

Zora Arsovski

2009-12-01

Full Text Available This paper describes design methodology for quality goals simulation model as a supporting tool for quality goal-directed decision-making at strategic management level. The paper presents such an integrated, system (MIS/DES and draw attention to the essential role of simulation based strategic quality goal-directed decision-making within it. With proposed approach it is possible to converge, or focus, comprehensive but static MIS knowledge in dynamic simulation models and to fully utilize prediction power of simulation for effective and integrated quality goal-directed strategic decision making. Importance of modeling in field of control, equality of knowledge and models, dynamic nature and complexity of models and real systems from viewpoint of modern cybernetic science are also presented in the paper. The final goal is a purposeful decision-making simulation system that guides in the right direction strategically focused management action promising implementation of strategic plans and achievement of related quality goals. In its experimental section the paper describes a quality goals model designed for concrete environment. Overall model structure, components structure, components relations, mathematical models, and other elements of modeling approach are also given in this section. Finally, an example of successfully designed simulation solution is given. The approach presented in the paper gives verbal and mathematical problem description, builds ontology of quality goals problem domain, uses Extended Petri Nets as modeling tools in order to obtain faithful model which easily can be replicated in object oriented class and object hierarchy.

Motivation of student teachers in educational psychology course: Its relation to the quality of seminar work and final achievement

Directory of Open Access Journals (Sweden)

Melita Puklek Levpušček

2007-11-01

Full Text Available The study examines various aspects of student teachers' initial motivation for educational psychology course and the motivation's effect on student teachers' engagement in a specific academic activity and on the final course achievement. At the beginning of the academic year 2004/2005 undergraduate student teachers filled in the Motivated Strategies for Learning Questionnaire (MSLQ, Pintrich et al., 1991, the part which assesses students' motivational orientations. During the academic year students prepared and then presented to their colleagues their seminar work in groups. After each presentation, members of the group assessed the quality of their individual preparation, analyzed the quality of group work and assessed their part of the seminar presentation. Students' achievement was measured by an exam after completing the entire educational psychology course. The results showed that those students who had found the educational psychology course interesting and useful, and who had participated in the course because of extrinsic reasons prepared seminar work better and assessed their seminar presentation with higher marks than those with low motivation for the course. Students' engagement in individual study and self-assessment of seminar presentation were related to the final course grade. In addition, students' perception of the course as interesting and useful (task value independently predicted final course grade, over and above the account of previous academic achievement.

Power quality problems and mitigation techniques

CERN Document Server

Singh, Bhim; Al-Haddad, Kamal

2014-01-01

Maintaining a stable level of power quality in the distribution network is a growing challenge due to increased use of power electronics converters in domestic, commercial and industrial sectors. Power quality deterioration is manifested in increased losses; poor utilization of distribution systems; mal-operation of sensitive equipment and disturbances to nearby consumers, protective devices, and communication systems. However, as the energy-saving benefits will result in increased AC power processed through power electronics converters, there is a compelling need for improved understanding o

Quality system in Malaysian National Tissue Bank

International Nuclear Information System (INIS)

Go Boon Thong; Firdaus, M. N.; Abd Rani Shamsudin

1999-01-01

Quality System in Malaysian National Tissue Bank is based on the Quality Manual which has been drawn up by the chairman, who is the Dean, School of Medical Sciences. The Quality Manual include general standard for Tissue Banking in University Science of Malaysia which describe and explain a set of general standard similar to the EATB standard. The primary aim of the quality system is to produce a safe and effective tissue graft for successful clinical use and to ensure the safety of tissue bank operators. The Quality Manual also related the role of a Technical Manual, which explain the standard of technical aspect of tissue bank in a Quality Assurance. The safe working environment and Good Laboratory Practice is highlight in Quality System. Documentation of tissue bank activities is the key to the administration to tissue bank. Finally Quality System in tissue banking will never be complete without a Tissue Bank Auditing System which allow the tissue bank coordinator and staff to look into the problem and further enhance the progress of the tissue bank

Problems concerning product quality enhancement

Directory of Open Access Journals (Sweden)

Marek Krynke

2016-03-01

Full Text Available In the article analysis of the discrepancies in the production process for selected products in a company producing candles was carried out. Using the Pareto-Lorenzdiagram and the FMEA method the most essential areas having influence on the production of candles were shown. Apart from factors connected with the manufacturing side of the process, factors of the labour organization and requirements concerning the quality of material were also noted. An appropriate quality of equipment constitutes one of the essential conditions of production process functioning and this directly influences manufacturing possibilities of the enterprise. A synthesis of immaterial factors that influence the production of the enterprise, taking into consideration conditions of functioning the production system, was also carried out. The set of factors selected for description was the fourteenth Toyota management principle. Respondents were asked to provide answers which could bring the best improvements.

[Systematic economic assessment and quality evaluation for traditional Chinese medicines].

Science.gov (United States)

Sun, Xiao; Guo, Li-ping; Shang, Hong-cai; Ren, Ming; Lei, Xiang

2015-05-01

To learn about the economic studies on traditional Chinese medicines in domestic literatures, in order to analyze the current economic assessment of traditional Chinese medicines and explore the existing problems. Efforts were made to search CNKI, VIP, Wanfang database and CBM by computer and include all literatures about economic assessment of traditional Chinese medicines published on professional domestic journals in the systematic assessment and quality evaluation. Finally, 50 articles were included in the study, and the systematic assessment and quality evaluation were made for them in terms of titles, year, authors' identity, expense source, disease type, study perspective, study design type, study target, study target source, time limit, cost calculation, effect indicator, analytical technique and sensitivity analysis. The finally quality score was 0.74, which is very low. The results of the study showed insufficient studies on economics of traditional Chinese medicines, short study duration and simple evaluation methods, which will be solved through unremitting efforts in the future.

No Problem? No Research, Little Learning ... Big Problem!

Directory of Open Access Journals (Sweden)

Fernando Ornelas Marques

2012-06-01

Full Text Available The motivation to carry out this study stemmed from the generalized perception that nowadays youth lacks the skills for the 21st century. Especially the high-level competences like critical thinking, problem solving and autonomy. Several tools can help to improve these competences (e.g. the SCRATCH programming language, but, as researchers and educators, we are mostly concerned with the skill to recognize problems. What if we do not find problems to solve? What if we do not even feel the need to find or solve problems? The problem is to recognize the problem; the next step is to equate the problem; finally we have to feel the need to solve it. No need? No invention. Recognizing a problem is probably the biggest problem of everyday life, because we are permanently faced with problems (many ill-defined problems, which we need to identify, equate and solve.

Reduce of adherence problems in galvanised processes through data mining techniques

International Nuclear Information System (INIS)

Martinez de Pison, F. J.; Ordieres, J.; Pernia, A.; Alba, F.; Torre, V.

2007-01-01

This paper presents an example of the application of data mining techniques to obtain hidden knowledge from the historical data of a hot dip galvanizing process and to establish rules to improve quality in the final product and to reduce errors in the process. For this purpose, the tuning records of a hot dip galvanizing line where coils with adherence problems in the zinc coating had been identified were used as starting point. From the database of the process, the classical data mining approach was applied to obtain and analyze a number of decision trees hat classified two types of coils, i.e. those with the right adherence and those with irregular adherence. The variables and values that might have influenced the quality of the coating were extracted from these tress. Several rules that may be applied to reduce the number of faulty coils with adherence problems were also established. (Author) 24 refs

PRA quality and use

International Nuclear Information System (INIS)

Okrent, D.; Apostolakis, G.; Whitley, R.; Garrick, B.J.

1982-10-01

This report deals with several inter-related aspects of probabilistic risk assessment. Some prior opinion regarding quality assurance, methodology and questions of peer review are reviewed, followed by comments by the authors on these and related subjects. Problems arising in decision-making by different groups concerning the meaning and validity of a PRA are examined, and the role of performance criteria in helping to achieve consensus is treated. Finally, a general approach to the development of performance criteria for systems and functions by the retrospective comparison of existing PRAs is proposed and examined in a preliminary fashion

Joint application of AI techniques, PRA and disturbance analysis methodology to problems in the maintenance and design of nuclear power plants. Final report

Energy Technology Data Exchange (ETDEWEB)

Okrent, D.

1989-03-01

This final report summarizes the accomplishments of a two year research project entitled ``Joint Application of Artificial Intelligence Techniques, Probabilistic Risk Analysis, and Disturbance Analysis Methodology to Problems in the Maintenance and Design of Nuclear Power Plants. The objective of this project is to develop and apply appropriate combinations of techniques from artificial intelligence, (AI), reliability and risk analysis and disturbance analysis to well-defined programmatic problems of nuclear power plants. Reactor operations issues were added to those of design and maintenance as the project progressed.

Health-related quality of life among children with mental health problems: a population-based approach

Directory of Open Access Journals (Sweden)

Dey Michelle

2012-06-01

Full Text Available Abstract Background Children with mental health problems have been neglected in health-related quality of life (HRQOL studies. Therefore, the aims of the current study were 1 to assess the influence of the presence of mental or physical health problems on HRQOL; and 2 to analyze the effects of item overlap between mental health problems and HRQOL-measurements. Methods Proxy- and self-rated HRQOL (KIDSCREEN-27 of children 9–14 years old was assessed across children with mental health problems (n = 535, children with physical health problems (n = 327, and healthy controls (n = 744. Multiple linear regression analyses were conducted with health status, severity of symptoms, status of medication use, gender and nationality as independent, and HRQOL scores as dependent variables. The effects of item overlap were analyzed by repeating regression analyses while excluding those HRQOL items that contextually overlapped the most frequently-occurring mental health problem (attention deficits. Results Severity of symptoms was the strongest predictor of reduced HRQOL. However, all other predictors (except for the status of medication use also contributed to the prediction of some HRQOL scores. Controlling for item overlap did not meaningfully alter the results. Conclusions When children with different health constraints are compared, the severity of their particular health problems should be considered. Furthermore, item overlap seems not to be a major problem when the HRQOL of children with mental health problems is studied. Hence, HRQOL assessments are useful to gather information that goes beyond the clinical symptoms of a health problem. This information can, for instance, be used to improve clinical practice.

[Discussion on agricultural product quality and safety problem from ecological view].

Science.gov (United States)

Xiao, Ming; Dong, Nan; Lyu, Xin

2015-08-01

There are many different perspectives about the sustainable agriculture, which had been proposed since the last three decades in the world. While China's ecologists and agronomists proposed a similar concept named 'ecological agriculture'. Although ecological agriculture in China has achieved substantial progress, including theory, models and supporting technologies nearly several decades of practice and development, its application guidance still is not yet clear. The organic agriculture model proposed by European Union is popular, but it is limited in the beneficiary groups and the social and ecological responsibility. In this context, the article based on an ecological point of view, analyzed the shortcomings of ecological imbalance caused by a single mode of agricultural production and the negative impact on the quality of agricultural products, and discussed the core values of ecological agriculture. On this basis, we put forward the concept of sustainable security of agricultural products. Based on this concept, an agricultural platform was established under the healthy ecosysphere environment, and from this agricultural platform, agricultural products could be safely and sustainably obtained. Around the central value of the concept, we designed the agricultural sustainable and security production model. Finally, we compared the responsibility, benefiting groups, agronomic practices selection and other aspects of sustainable agriculture with organic agriculture, and proved the advancement of sustainable agricultural model in agricultural production quality and safety.

Predictive value of general movements' quality in low-risk infants for minor neurological dysfunction and behavioural problems at preschool age.

Science.gov (United States)

Bennema, Anne N; Schendelaar, Pamela; Seggers, Jorien; Haadsma, Maaike L; Heineman, Maas Jan; Hadders-Algra, Mijna

2016-03-01

General movement (GM) assessment is a well-established tool to predict cerebral palsy in high-risk infants. Little is known on the predictive value of GM assessment in low-risk populations. To assess the predictive value of GM quality in early infancy for the development of the clinically relevant form of minor neurological dysfunction (complex MND) and behavioral problems at preschool age. Prospective cohort study. A total of 216 members of the prospective Groningen Assisted Reproductive Techniques (ART) cohort study were included in this study. ART did not affect neurodevelopmental outcome of these relatively low-risk infants born to subfertile parents. GM quality was determined at 2 weeks and 3 months. At 18 months and 4 years, the Hempel neurological examination was used to assess MND. At 4 years, parents completed the Child Behavior Checklist; this resulted in the total problem score (TPS), internalizing problem score (IPS), and externalizing problem score (EPS). Predictive values of definitely (DA) and mildly (MA) abnormal GMs were calculated. DA GMs at 2 weeks were associated with complex MND at 18 months and atypical TPS and IPS at 4 years (all ppredictive value of DA GMs at 2 weeks were rather low (13%-60%); specificity and negative predictive value were excellent (92%-99%). DA GMs at 3 months occurred too infrequently to calculate prediction. MA GMs were not associated with outcome. GM quality as a single predictor for complex MND and behavioral problems at preschool age has limited clinical value in children at low risk for developmental disorders. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Probability evaluation in problems of structural safety and quality assurance through oriented simulation

International Nuclear Information System (INIS)

Puppo, A.H.

1990-01-01

The procedure described in this work may be considered to improve the Harbitz method by a limitation of the directions corresponding to the sampling points. By the introduction of polar coordinates n-dimensional system, these directions may be limited to those contained in an hypercone, whose axis contains the design point. Some problems with strongly convex failure domain presented in some structural systems (Igusa and Der Kiureghian, 1988; Nadim, 1990) and also in the acceptance probability of analysis and rejection of quality assurance methods may be efficiently treated. (Author) [es

Decision theory on the quality evaluation of medical images

International Nuclear Information System (INIS)

Lessa, Patricia Silva

2001-10-01

The problem of quality has been a constant issue in every organization.One is always seeking to produce more, to do it at a lower cost, and to do it with better quality. However, in this country, there is no radiographic film quality control system for radiographic services. The tittle that actually gets done is essentially ad hoc and superficial. The implications of this gap, along with some other shortcomings that exist in process as a whole (the state of the x-ray equipment, the adequate to use in order to obtain a radiography, the quality of the film, the processing of the film, the brightness and homogeneity of the viewing boxes, the ability of the radiologist), have a very negative impact on the quality of the medical image, and, as result, to the quality of the medical diagnosis and therapy. It frequently happens that many radiographs have to be repeated, which leads to an increase of the patient's exposure to radiation, as well as of the cost of the procedure for the patient. Low quality radiographs that are not repeated greatly increase the probability of a wrong diagnosis, and consequently, of inadequate therapeutical procedures, thus producing increased incidence of bad outcomes and higher costs. The paradigm proposed in order to establish a system for the measurement of the image's quality is Decision Theory. The problem of the assessment of the image is studied by proposing a Decision Theory approach. The review of the literature reveals a great concern with the quality of the image, along with an absence of an adequate paradigm and several essentially empirical procedures. Image parameters are developed in order to formalize the problem in terms of Decision Theory, and various aspects of image digitalisation are exposed. Finally, a solution is presented, including a protocol for quality control. (author)

Quality prediction modeling for multistage manufacturing based on classification and association rule mining

Directory of Open Access Journals (Sweden)

Kao Hung-An

2017-01-01

Full Text Available For manufacturing enterprises, product quality is a key factor to assess production capability and increase their core competence. To reduce external failure cost, many research and methodology have been introduced in order to improve process yield rate, such as TQC/TQM, Shewhart CycleDeming's 14 Points, etc. Nowadays, impressive progress has been made in process monitoring and industrial data analysis because of the Industry 4.0 trend. Industries start to utilize quality control (QC methodology to lower inspection overhead and internal failure cost. Currently, the focus of QC is mostly in the inspection of single workstation and final product, however, for multistage manufacturing, many factors (like equipment, operators, parameters, etc. can have cumulative and interactive effects to the final quality. When failure occurs, it is difficult to resume the original settings for cause analysis. To address these problems, this research proposes a combination of principal components analysis (PCA with classification and association rule mining algorithms to extract features representing relationship of multiple workstations, predict final product quality, and analyze the root-cause of product defect. The method is demonstrated on a semiconductor data set.

Causes of Indoor Air Quality Problems in Schools: Summary of Scientific Research

Energy Technology Data Exchange (ETDEWEB)

Bayer, C.W.

2001-02-22

In the modern urban setting, most individuals spend about 80% of their time indoors and are therefore exposed to the indoor environment to a much greater extent than to the outdoors (Lebowitz 1992). Concomitant with this increased habitation in urban buildings, there have been numerous reports of adverse health effects related to indoor air quality (IAQ) (sick buildings). Most of these buildings were built in the last two decades and were constructed to be energy-efficient. The quality of air in the indoor environment can be altered by a number of factors: release of volatile compounds from furnishings, floor and wall coverings, and other finishing materials or machinery; inadequate ventilation; poor temperature and humidity control; re-entrainment of outdoor volatile organic compounds (VOCs); and the contamination of the indoor environment by microbes (particularly fungi). Armstrong Laboratory (1992) found that the three most frequent causes of IAQ are (1) inadequate design and/or maintenance of the heating, ventilation, and air-conditioning (HVAC) system, (2) a shortage of fresh air, and (3) lack of humidity control. A similar study by the National Institute for Occupational Safety and Health (NIOSH 1989) recognized inadequate ventilation as the most frequent source of IAQ problems in the work environment (52% of the time). Poor IAQ due to microbial contamination can be the result of the complex interactions of physical, chemical, and biological factors. Harmful fungal populations, once established in the HVAC system or occupied space of a modern building, may episodically produce or intensify what is known as sick building syndrome (SBS) (Cummings and Withers 1998). Indeed, SBS caused by fungi may be more enduring and recalcitrant to treatment than SBS from multiple chemical exposures (Andrae 1988). An understanding of the microbial ecology of the indoor environment is crucial to ultimately resolving many IAQ problems. The incidence of SBS related to multiple

Final Report

Energy Technology Data Exchange (ETDEWEB)

Gurney, Kevin R. [Arizona Univ., Mesa, AZ (United States)

2015-01-12

This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

Economic Stress, Emotional Quality of Life, and Problem Behavior in Chinese Adolescents with and without Economic Disadvantage

Science.gov (United States)

Shek, Daniel T. L.

2005-01-01

The relationships between perceived economic stress (current economic hardship and future economic worry) and emotional quality of life (existential well-being, life satisfaction, self-esteem, sense of mastery, psychological morbidity) as well as problem behavior (substance abuse and delinquency) were examined in 1519 Chinese adolescents with and…

Advances in Rosetta structure prediction for difficult molecular-replacement problems

International Nuclear Information System (INIS)

DiMaio, Frank

2013-01-01

Modeling advances using Rosetta structure prediction to aid in solving difficult molecular-replacement problems are discussed. Recent work has shown the effectiveness of structure-prediction methods in solving difficult molecular-replacement problems. The Rosetta protein structure modeling suite can aid in the solution of difficult molecular-replacement problems using templates from 15 to 25% sequence identity; Rosetta refinement guided by noisy density has consistently led to solved structures where other methods fail. In this paper, an overview of the use of Rosetta for these difficult molecular-replacement problems is provided and new modeling developments that further improve model quality are described. Several variations to the method are introduced that significantly reduce the time needed to generate a model and the sampling required to improve the starting template. The improvements are benchmarked on a set of nine difficult cases and it is shown that this improved method obtains consistently better models in less running time. Finally, strategies for best using Rosetta to solve difficult molecular-replacement problems are presented and future directions for the role of structure-prediction methods in crystallography are discussed

PACS quality control and automatic problem notifier

Science.gov (United States)

Honeyman-Buck, Janice C.; Jones, Douglas; Frost, Meryll M.; Staab, Edward V.

1997-05-01

One side effect of installing a clinical PACS Is that users become dependent upon the technology and in some cases it can be very difficult to revert back to a film based system if components fail. The nature of system failures range from slow deterioration of function as seen in the loss of monitor luminance through sudden catastrophic loss of the entire PACS networks. This paper describes the quality control procedures in place at the University of Florida and the automatic notification system that alerts PACS personnel when a failure has happened or is anticipated. The goal is to recover from a failure with a minimum of downtime and no data loss. Routine quality control is practiced on all aspects of PACS, from acquisition, through network routing, through display, and including archiving. Whenever possible, the system components perform self and between platform checks for active processes, file system status, errors in log files, and system uptime. When an error is detected or a exception occurs, an automatic page is sent to a pager with a diagnostic code. Documentation on each code, trouble shooting procedures, and repairs are kept on an intranet server accessible only to people involved in maintaining the PACS. In addition to the automatic paging system for error conditions, acquisition is assured by an automatic fax report sent on a daily basis to all technologists acquiring PACS images to be used as a cross check that all studies are archived prior to being removed from the acquisition systems. Daily quality control is preformed to assure that studies can be moved from each acquisition and contrast adjustment. The results of selected quality control reports will be presented. The intranet documentation server will be described with the automatic pager system. Monitor quality control reports will be described and the cost of quality control will be quantified. As PACS is accepted as a clinical tool, the same standards of quality control must be established

River water quality modelling under drought situations – the Turia River case

Directory of Open Access Journals (Sweden)

J. Paredes-Arquiola

2016-10-01

Full Text Available Drought and water shortage effects are normally exacerbated due to collateral impacts on water quality, since low streamflow affects water quality in rivers and water uses depend on it. One of the most common problems during drought conditions is maintaining a good water quality while securing the water supply to demands. This research analyses the case of the Turia River Water Resource System located in Eastern Spain. Its main water demand comes as urban demand from Valencia City, which intake is located in the final stretch of the river, where streamflow may become very low during droughts. As a result, during drought conditions concentrations of pathogens and other contaminants increase, compromising the water supply to Valencia City. In order to define possible solutions for the above-mentioned problem, we have developed an integrated model for simulating water management and water quality in the Turia River Basin to propose solutions for water quality problems under water scarcity. For this purpose, the Decision Support System Shell AQUATOOL has been used. The results demonstrate the importance of applying environmental flows as a measure of reducing pollutant's concentration depending on the evolution of a drought event and the state of the water resources system.

Analysis of problems in the implementation of management systems of quality in the energy industry, oil and gas

Energy Technology Data Exchange (ETDEWEB)

Borhi, Juan Carlos

2010-09-15

The aim of this paper is to describe the problem in the development of systems of quality management based on ISO 9001:2008 to implement in energy companies involved in the extraction, distribution and processing of oil and gas.

Quality management: efforts and problems in Ethiopian ...

African Journals Online (AJOL)

This paper deals with the analysis and the current quality management practices in Ethiopian manufacturing industries. The research is based on a survey conducted on 55 representative industries all over the country. A brief introduction is given on the fundamental concepts of quality with reference to the recent literature ...

SIAM conference on inverse problems: Geophysical applications. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

This conference was the second in a series devoted to a particular area of inverse problems. The theme of this series is to discuss problems of major scientific importance in a specific area from a mathematical perspective. The theme of this symposium was geophysical applications. In putting together the program we tried to include a wide range of mathematical scientists and to interpret geophysics in as broad a sense as possible. Our speaker came from industry, government laboratories, and diverse departments in academia. We managed to attract a geographically diverse audience with participation from five continents. There were talks devoted to seismology, hydrology, determination of the earth`s interior on a global scale as well as oceanographic and atmospheric inverse problems.

Radiation quality and radiation risks - some current problems

International Nuclear Information System (INIS)

Kellerer, A.M.; Hahn, K.

1989-01-01

The newly evaluated cancer mortality data of the atomic bomb survivors suggest substantially enhanced risk estimates, and the various factors that are involved in the change are considered. The enhanced risk estimates have already led to added restrictions in the dose limits for radiation workers, and there may be a further tightening of regulations in the future. The impending revision of the quality factors in radiation protection may, therefore, lead to practical difficulties, and a careful consideration of the various aspects involved in a revision is required. A liaison group of ICRU and ICRP has proposed a reformulation of the quality factor that is related not to the LET, but to the microdosimetric variably y. The relation leads to increased quality factors for neutrons, but also to a quality factor for γ rays of only 0.5. Alternatives are presented that relate the quality factor to LET and that retain γ- rays as the reference radiation. One option corresponds to different quality factors for γ rays and X-rays, the other option sets the quality factor for photons approximately equal to unity, irrespective of energy. (author)

New options for optical quality tolerances

Science.gov (United States)

Aikens, Dave

2017-11-01

The optics community has long recognized the problems of misinterpretation of the surface quality specification and the potential for conflict1-2. Finally in 2017 there are new versions of the ISO and ANSI standards for surface imperfection tolerances which provide vastly improved alternatives to the existing options, especially the use of the US Military standard for specifying optical quality tolerances. This paper will review the existing standards in common use for specifying surface imperfections, and then describe in detail the new versions of the ISO and ANSI standards which are available in 2017. The details of the notations and inspection methods for each of the optics specifications will be provided, and the differences between the various alternatives will be discussed.

An overview on polynomial approximation of NP-hard problems

Directory of Open Access Journals (Sweden)

Paschos Vangelis Th.

2009-01-01

Full Text Available The fact that polynomial time algorithm is very unlikely to be devised for an optimal solving of the NP-hard problems strongly motivates both the researchers and the practitioners to try to solve such problems heuristically, by making a trade-off between computational time and solution's quality. In other words, heuristic computation consists of trying to find not the best solution but one solution which is 'close to' the optimal one in reasonable time. Among the classes of heuristic methods for NP-hard problems, the polynomial approximation algorithms aim at solving a given NP-hard problem in poly-nomial time by computing feasible solutions that are, under some predefined criterion, as near to the optimal ones as possible. The polynomial approximation theory deals with the study of such algorithms. This survey first presents and analyzes time approximation algorithms for some classical examples of NP-hard problems. Secondly, it shows how classical notions and tools of complexity theory, such as polynomial reductions, can be matched with polynomial approximation in order to devise structural results for NP-hard optimization problems. Finally, it presents a quick description of what is commonly called inapproximability results. Such results provide limits on the approximability of the problems tackled.

QUALITY HACCP APPLIED TO FLIGHT CATERING INDUSTRY

Directory of Open Access Journals (Sweden)

David Souza Vaz

2016-07-01

Full Text Available The quality industry try to standardize the production procedures, actions and controls work in a uniform manner so as not to cause errors in operation and customer dissatisfaction, bringing the final product according to the requested specifications. With the duty to commitment with the consumer, many companies try to answer the questions of the quality applying techniques so that their processes are so tiny they are done in the most correct and accurate as possible. Since 2008 noted a growing importance as the HACCP due the major problems occurred in the handling of food, such as food poisoning, foreign objects and sanitary quality, which are the largest and most serious problems resulting from the production process, thus generating a new culture and the care of the food. Considering the importance of the issue of the impending population growth that carry air travel as well as international agreements between countries and continents, it has being demonstrated the effectiveness of the system demonstrating in practice how they work their analysis of points of danger and an investigation into the operational process within the context of the food industry.

Gender-Related Quality of Parent-Child Interactions and Early Adolescent Problem Behaviors: Exploratory Study with Midwestern Samples

Science.gov (United States)

Spoth, Richard; Neppl, Tricia; Goldberg-Lillehoj, Catherine; Jung, Tony; Ramisetty-Mikler, Suhasini

2006-01-01

This article reports two exploratory studies testing a model guided by a social interactional perspective, positing an inverse relation between the quality of parent-child interactions and adolescent problem behaviors. It addresses mixed findings in the literature related to gender differences. Study 1 uses cross-sectional survey data from…

Simple Solutions to Complex Problems: Moral Panic and the Fluid Shift from "Equity" to "Quality" in Education

Science.gov (United States)

Mockler, Nicole

2014-01-01

Education is increasingly conceptualised by governments and policymakers in western democracies in terms of productivity and human capital, emphasising elements of individualism and competition over concerns around democracy and equity. More and more, solutions to intransigent educational problems related to equity are seen in terms of quality and…

Malting and Brewing Industries Encounter Fusarium spp. Related Problems

Directory of Open Access Journals (Sweden)

Kristina Mastanjević

2018-01-01

Full Text Available Versatile microbiota are inevitably naturally present on cereals. Fungi, yeasts and bacteria and their metabolites all contribute to the quality and safety of the final products derived from most common beer cereals—barley and wheat. The microorganisms that are most often associated with the safety and quality of cereals for beer production belong to the Fusarium spp. They greatly influence yields from the field, and can modify and diminish economic success for farmers. However, the real problem is their harmful metabolites—mycotoxins—that affect the health of humans and animals. In the era of emerging analytical methodologies, the spectrum of known toxins originating from microorganisms that can pose a threat to humans has grown tremendously. Therefore, it is necessary to monitor microflora throughout the productive “barley to beer” chain and to act suppressive on the proliferation of unwanted microorganisms, before and during malting, preventing the occurrence of mycotoxins in final products and by-products. Multi-mycotoxin analyses are very advanced and useful tools for the assessment of product safety, and legislation should follow up and make some important changes to regulate as yet unregulated, but highly occurring, microbial toxins in malt and beer.

Decreased health-related quality of life in patients with diabetic foot problems

Science.gov (United States)

Sothornwit, Jin; Srisawasdi, Gulapar; Suwannakin, Atchara; Sriwijitkamol, Apiradee

2018-01-01

Purpose The aim of this study was to investigate health-related quality of life (HRQoL) in patients with diabetic foot problems and compare the HRQoL between diabetic patients with: 1) diabetic foot problems (DF), including diabetic foot ulcer (DFU) or amputation (AMPU); 2) other diabetic complications (COM), such as diabetic retinopathy (DR), end-stage renal disease (ESRD), or coronary artery disease (CAD); and 3) no diabetic complication (CON). Patients and methods A total of 254 diabetic patients were studied in a cross-sectional setting. HRQoL was evaluated using Thai version of the Euro Quality of Life Questionnaire (EuroQoL), with five dimensions and five-level scale (EQ-5D-5L). Utility scores were calculated using time trade-off methods. Results A total of 141 patients in the DF group (98 DFU and 43 AMPU groups), 82 in the COM group (27 DR, 28 ESRD, and 27 CAD groups), and 31 in the CON group were interviewed. The mean age was 63.2±12.1 years, body mass index was 24.9±4.7 kg/m2, mean hemoglobin A1c was 7.7±2.1%, duration of diabetes was 13.1±9.9 years, and the mean utility scores were 0.799±0.25. After having DF, 21% of patients had lost their jobs. The COM group had lower utility scores than the CON group. Among the diabetic complications, the DF group had the lowest mean utility scores as compared to the COM and CON groups (0.703±0.28 in the DF group, 0.903±0.15 in the COM group, and 0.961±0.06 in the CON group, Pdiabetic foot care should be emphasized in clinical practice to prevent foot complications. PMID:29563821

Decreased health-related quality of life in patients with diabetic foot problems.

Science.gov (United States)

Sothornwit, Jin; Srisawasdi, Gulapar; Suwannakin, Atchara; Sriwijitkamol, Apiradee

2018-01-01

The aim of this study was to investigate health-related quality of life (HRQoL) in patients with diabetic foot problems and compare the HRQoL between diabetic patients with: 1) diabetic foot problems (DF), including diabetic foot ulcer (DFU) or amputation (AMPU); 2) other diabetic complications (COM), such as diabetic retinopathy (DR), end-stage renal disease (ESRD), or coronary artery disease (CAD); and 3) no diabetic complication (CON). A total of 254 diabetic patients were studied in a cross-sectional setting. HRQoL was evaluated using Thai version of the Euro Quality of Life Questionnaire (EuroQoL), with five dimensions and five-level scale (EQ-5D-5L). Utility scores were calculated using time trade-off methods. A total of 141 patients in the DF group (98 DFU and 43 AMPU groups), 82 in the COM group (27 DR, 28 ESRD, and 27 CAD groups), and 31 in the CON group were interviewed. The mean age was 63.2±12.1 years, body mass index was 24.9±4.7 kg/m 2 , mean hemoglobin A1c was 7.7±2.1%, duration of diabetes was 13.1±9.9 years, and the mean utility scores were 0.799±0.25. After having DF, 21% of patients had lost their jobs. The COM group had lower utility scores than the CON group. Among the diabetic complications, the DF group had the lowest mean utility scores as compared to the COM and CON groups (0.703±0.28 in the DF group, 0.903±0.15 in the COM group, and 0.961±0.06 in the CON group, P diabetic foot care should be emphasized in clinical practice to prevent foot complications.

An algorithm for the split-feasibility problems with application to the split-equality problem.

Science.gov (United States)

Chuang, Chih-Sheng; Chen, Chi-Ming

2017-01-01

In this paper, we study the split-feasibility problem in Hilbert spaces by using the projected reflected gradient algorithm. As applications, we study the convex linear inverse problem and the split-equality problem in Hilbert spaces, and we give new algorithms for these problems. Finally, numerical results are given for our main results.

Family Emotional Climate and Sibling Relationship Quality: Influences on Behavioral Problems and Adaptation in Preschool-Aged Children

Science.gov (United States)

Modry-Mandell, Kerri L.; Gamble, Wendy C.; Taylor, Angela R.

2007-01-01

We examined the impact of family emotional climate and sibling relationship quality on behavioral problems and adaptation in preschool-aged children. Participants were 63 mothers with a preschool-aged child enrolled in a Southern Arizona Head Start Program. Siblings were identified as children closest in age to target child. Mothers of…

[Current situations and problems of quality control for medical imaging display systems].

Science.gov (United States)

Shibutani, Takayuki; Setojima, Tsuyoshi; Ueda, Katsumi; Takada, Katsumi; Okuno, Teiichi; Onoguchi, Masahisa; Nakajima, Tadashi; Fujisawa, Ichiro

2015-04-01

Diagnostic imaging has been shifted rapidly from film to monitor diagnostic. Consequently, Japan medical imaging and radiological systems industries association (JIRA) have recommended methods of quality control (QC) for medical imaging display systems. However, in spite of its need by majority of people, executing rate is low. The purpose of this study was to validate the problem including check items about QC for medical imaging display systems. We performed acceptance test of medical imaging display monitors based on Japanese engineering standards of radiological apparatus (JESRA) X-0093*A-2005 to 2009, and performed constancy test based on JESRA X-0093*A-2010 from 2010 to 2012. Furthermore, we investigated the cause of trouble and repaired number. Medical imaging display monitors had 23 inappropriate monitors about visual estimation, and all these monitors were not criteria of JESRA about luminance uniformity. Max luminance was significantly lower year-by-year about measurement estimation, and the 29 monitors did not meet the criteria of JESRA about luminance deviation. Repaired number of medical imaging display monitors had 25, and the cause was failure liquid crystal panel. We suggested the problems about medical imaging display systems.

Students’ Mathematical Problem-Solving Abilities Through The Application of Learning Models Problem Based Learning

Science.gov (United States)

Nasution, M. L.; Yerizon, Y.; Gusmiyanti, R.

2018-04-01

One of the purpose mathematic learning is to develop problem solving abilities. Problem solving is obtained through experience in questioning non-routine. Improving students’ mathematical problem-solving abilities required an appropriate strategy in learning activities one of them is models problem based learning (PBL). Thus, the purpose of this research is to determine whether the problem solving abilities of mathematical students’ who learn to use PBL better than on the ability of students’ mathematical problem solving by applying conventional learning. This research included quasi experiment with static group design and population is students class XI MIA SMAN 1 Lubuk Alung. Class experiment in the class XI MIA 5 and class control in the class XI MIA 6. The instrument of final test students’ mathematical problem solving used essay form. The result of data final test in analyzed with t-test. The result is students’ mathematical problem solving abilities with PBL better then on the ability of students’ mathematical problem solving by applying conventional learning. It’s seen from the high percentage achieved by the group of students who learn to use PBL for each indicator of students’ mathematical problem solving.

Statistical method for quality control in presence of measurement errors

International Nuclear Information System (INIS)

Lauer-Peccoud, M.R.

1998-01-01

In a quality inspection of a set of items where the measurements of values of a quality characteristic of the item are contaminated by random errors, one can take wrong decisions which are damageable to the quality. So of is important to control the risks in such a way that a final quality level is insured. We consider that an item is defective or not if the value G of its quality characteristic is larger or smaller than a given level g. We assume that, due to the lack of precision of the measurement instrument, the measurement M of this characteristic is expressed by ∫ (G) + ξ where f is an increasing function such that the value ∫ (g 0 ) is known and ξ is a random error with mean zero and given variance. First we study the problem of the determination of a critical measure m such that a specified quality target is reached after the classification of a lot of items where each item is accepted or rejected depending on whether its measurement is smaller or greater than m. Then we analyse the problem of testing the global quality of a lot from the measurements for a example of items taken from the lot. For these two kinds of problems and for different quality targets, we propose solutions emphasizing on the case where the function ∫ is linear and the error ξ and the variable G are Gaussian. Simulation results allow to appreciate the efficiency of the different considered control procedures and their robustness with respect to deviations from the assumptions used in the theoretical derivations. (author)

Quality factor: conceptual problems and practical solutions

International Nuclear Information System (INIS)

Dennis, J.A.

1988-01-01

In the past ten years a growing divide has become apparent between the dosimetric concepts designed to provide measures of stochastic risks and those designed for the measurement and control of exposures to radiation. Those designed to provide estimates of risk, e.g. effective dose equivalent, might need to be further refined to incorporate the latest scientific beliefs and evidence about the dependence on radiation quality and dose rate as well as on age and sex. Both animal and human evidence strongly supports a belief that different tissues and different types of neoplasm will have different dependencies on radiation quality and dose rate. For practical purposes of risk estimation it is necessary to select the same values for all human neoplasms. There are reasons for using life shortening in animals as a basis for this purpose, but the data for the dependence on the whole range of radiation qualities is meagre. To provide some stability for the new concepts of measurement and calibration it may be better to accommodate changing perceptions on radiation risks by specifying different levels of exposure for different types of radiation without changing the current quality factors for the measurement quantities. (author)

Quality Assurance Strategy for Existing Homes: Final Quality Management Primer for High Performing Homes

Energy Technology Data Exchange (ETDEWEB)

Del Bianco, M.; Taggart, J.; Sikora, J.; Wood, A.

2012-12-01

This guide is designed to help Building America (BA) Teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

Quality Assurance Strategy for Existing Homes. Final Quality Management Primer for High Performing Homes

Energy Technology Data Exchange (ETDEWEB)

Del Bianco, M. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Taggart, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Sikora, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Wood, A. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States)

2012-12-01

This guide is designed to help Building America (BA) teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

Quality dependent fusion of intramodal and multimodal biometric experts

Science.gov (United States)

Kittler, J.; Poh, N.; Fatukasi, O.; Messer, K.; Kryszczuk, K.; Richiardi, J.; Drygajlo, A.

2007-04-01

We address the problem of score level fusion of intramodal and multimodal experts in the context of biometric identity verification. We investigate the merits of confidence based weighting of component experts. In contrast to the conventional approach where confidence values are derived from scores, we use instead raw measures of biometric data quality to control the influence of each expert on the final fused score. We show that quality based fusion gives better performance than quality free fusion. The use of quality weighted scores as features in the definition of the fusion functions leads to further improvements. We demonstrate that the achievable performance gain is also affected by the choice of fusion architecture. The evaluation of the proposed methodology involves 6 face and one speech verification experts. It is carried out on the XM2VTS data base.

The quality cost loop in quality assurance

International Nuclear Information System (INIS)

Grabowski, S.P.

1979-01-01

A system to determine quality cost is described which solves two major problems: - Determination of quality cost with sufficient accuracy in consideration of rentability - Implementation of quality cost in cost accounting. (RW) [de

QUALITY, OBSOLESCENCE AND UNSUSTAINABLE INNOVATION

Directory of Open Access Journals (Sweden)

Rudi Kurz

2015-12-01

Full Text Available One of the negative side effects of the consumer society and the increasing number of consumer goods available to the average household is the intransparency of product quality, especially product lifetime. There are many examples on failing products and premature obsolescence. Often this phenomenon is related to companies’ profit maximization strategies (planned obsolescence and consumer protection policy is mobilized to stop this type of exploitation. The paper applies micro-economic analysis to discuss the problem of optimal product quality (e.g. lifetime in terms of cost-benefit-analysis and under imperfect information (based on Akerlof’s lemon problem. Given consumers’ actual willingness to pay there is an optimal quality which is lower than the technically possible. If the innovation perspective (Schumpeter’s “creative destruction” is added to the analysis, increasing global competition and speed of product innovation are identified as core drivers for shorter product lifecycles and tend to be the actual limiting factor of product lifetime (economic vs. technical obsolescence. Even if the goals of sustainable development are included in the analysis, this does not provide an unambiguous argument for long-life products as new products tend to be more eco-efficient. A broader discussion on optimal quality (lifetime of products is necessary, based on holistic life-cycle assessment of alternative product quality options. And finally: The tendency of increasing aftersales disappointment of consumers’ expectations and conflicts with sustainable development goals need to be addressed in a more general debate on (limits of consumerism. Minor changes in the laws for protecting consumers (e.g. longer warranty will not do the job.

Improving Multi-Objective Management of Water Quality Tipping Points: Revisiting the Classical Shallow Lake Problem

Science.gov (United States)

Quinn, J. D.; Reed, P. M.; Keller, K.

2015-12-01

Recent multi-objective extensions of the classical shallow lake problem are useful for exploring the conceptual and computational challenges that emerge when managing irreversible water quality tipping points. Building on this work, we explore a four objective version of the lake problem where a hypothetical town derives economic benefits from polluting a nearby lake, but at the risk of irreversibly tipping the lake into a permanently polluted state. The trophic state of the lake exhibits non-linear threshold dynamics; below some critical phosphorus (P) threshold it is healthy and oligotrophic, but above this threshold it is irreversibly eutrophic. The town must decide how much P to discharge each year, a decision complicated by uncertainty in the natural P inflow to the lake. The shallow lake problem provides a conceptually rich set of dynamics, low computational demands, and a high level of mathematical difficulty. These properties maximize its value for benchmarking the relative merits and limitations of emerging decision support frameworks, such as Direct Policy Search (DPS). Here, we explore the use of DPS as a formal means of developing robust environmental pollution control rules that effectively account for deeply uncertain system states and conflicting objectives. The DPS reformulation of the shallow lake problem shows promise in formalizing pollution control triggers and signposts, while dramatically reducing the computational complexity of the multi-objective pollution control problem. More broadly, the insights from the DPS variant of the shallow lake problem formulated in this study bridge emerging work related to socio-ecological systems management, tipping points, robust decision making, and robust control.

Quality of Work Life: Theoretical and Methodological Problems, and Presentation of a New Model and Measuring Instrument

Science.gov (United States)

Martel, Jean-Pierre; Dupuis, Gilles

2006-01-01

Purpose: Ever since the concept of Quality of Work Life (QWL) was first used over 30 years ago, a range of definitions and theoretical constructs have succeeded each other with the aim of mitigating the many problems facing the concept. A historical overview of the concept of QWL is presented here. Given the lack of consensus concerning the…

Evaluating supplier quality performance using analytical hierarchy process

Science.gov (United States)

Kalimuthu Rajoo, Shanmugam Sundram; Kasim, Maznah Mat; Ahmad, Nazihah

2013-09-01

This paper elaborates the importance of evaluating supplier quality performance to an organization. Supplier quality performance evaluation reflects the actual performance of the supplier exhibited at customer's end. It is critical in enabling the organization to determine the area of improvement and thereafter works with supplier to close the gaps. Success of the customer partly depends on supplier's quality performance. Key criteria as quality, cost, delivery, technology support and customer service are categorized as main factors in contributing to supplier's quality performance. 18 suppliers' who were manufacturing automotive application parts evaluated in year 2010 using weight point system. There were few suppliers with common rating which led to common ranking observed by few suppliers'. Analytical Hierarchy Process (AHP), a user friendly decision making tool for complex and multi criteria problems was used to evaluate the supplier's quality performance challenging the weight point system that was used for 18 suppliers'. The consistency ratio was checked for criteria and sub-criteria. Final results of AHP obtained with no overlap ratings, therefore yielded a better decision making methodology as compared to weight point rating system.

Health-related quality of life, emotional and behavioral problems in mild to moderate prematures at (pre-)school age

NARCIS (Netherlands)

Ketharanathan, N.; Lee, W.; Mol, A.C. de

2011-01-01

BACKGROUND: There is a gap in the knowledge of longterm outcome of mild to moderate prematures compared to the extreme prematures or very low birth weight infants. AIM: Determine health-related quality of life (HRQoL) and prevalence of emotional and behavioral problems in (pre-)school age children

Electric power quality analysis methods. Application to voltage dips and harmonic disturbances

International Nuclear Information System (INIS)

Vanya, Ignatova

2006-10-01

The power quality concerns all the actors in the energy domains, that they are network administrators, suppliers, producers, or consumers of electricity. The research work presented in this PhD thesis is situated in the field of the power quality monitoring. Its objective is to introduce new techniques for analysis of power quality problems. There are different methods designed for the analysis of the power quality disturbances. This method reaches very good performances in the voltage dips analysis, as it allows segmenting, classifying and characterising these power quality disturbances. The periodic systems method allows the theoretical study of the generation and the propagation of harmonic disturbances in the network. Finally, the statistical matrix method has the objective to represent statistically electrical signals without loss of important information. (author)

New approach to equipment quality evaluation method with distinct functions

Directory of Open Access Journals (Sweden)

Milisavljević Vladimir M.

2016-01-01

Full Text Available The paper presents new approach for improving method for quality evaluation and selection of equipment (devices and machinery by applying distinct functions. Quality evaluation and selection of devices and machinery is a multi-criteria problem which involves the consideration of numerous parameters of various origins. Original selection method with distinct functions is based on technical parameters with arbitrary evaluation of each parameter importance (weighting. Improvement of this method, presented in this paper, addresses the issue of weighting of parameters by using Delphi Method. Finally, two case studies are provided, which included quality evaluation of standard boilers for heating and evaluation of load-haul-dump (LHD machines, to demonstrate applicability of this approach. Analytical Hierarchical Process (AHP is used as a control method.

Quantitative research versus quality assurance, quality improvement, total quality management, and continuous quality improvement.

Science.gov (United States)

Vogelsang, J

1999-04-01

The purpose of this report is to provide a review of the scientific method used in the quantitative research studies for consumers, evaluators, and applied nurse researchers. The fundamental characteristics of the problem-solving/ performance-improvement processes of quality assurance, quality improvement, total quality management, and continuous quality improvement are described. Research is compared with these processes, and is followed by a discussion about the publication of quantitative research findings.

Water quality criteria for hexachloroethane: Final report

Energy Technology Data Exchange (ETDEWEB)

Davidson, K.A.; Hovatter, P.S.; Ross, R.H.

1988-03-01

The available data regarding the environmental fate, aquatic toxicity, and mammalian toxicity of hexachloroethane, which is used in military screening smokes, were reviewed. The USEPA guidelines were used to generate water quality criteria for the protection of aquatic life and its uses and of human health. 16 tabs.

Mathematical Problems in Synthetic Aperture Radar

Science.gov (United States)

Klein, Jens

2010-10-01

This thesis is concerned with problems related to Synthetic Aperture Radar (SAR). The thesis is structured as follows: The first chapter explains what SAR is, and the physical and mathematical background is illuminated. The following chapter points out a problem with a divergent integral in a common approach and proposes an improvement. Numerical comparisons are shown that indicate that the improvements allow for a superior image quality. Thereafter the problem of limited data is analyzed. In a realistic SAR-measurement the data gathered from the electromagnetic waves reflected from the surface can only be collected from a limited area. However the reconstruction formula requires data from an infinite distance. The chapter gives an analysis of the artifacts which can obscure the reconstructed images due to this problem. Additionally, some numerical examples are shown that point to the severity of the problem. In chapter 4 the fact that data is available only from a limited area is used to propose a new inversion formula. This inversion formula has the potential to make it easier to suppress artifacts due to limited data and, depending on the application, can be refined to a fast reconstruction formula. In the penultimate chapter a solution to the problem of left-right ambiguity is presented. This problem exists since the invention of SAR and is caused by the geometry of the measurements. This leads to the fact that only symmetric images can be obtained. With the solution from this chapter it is possible to reconstruct not only the even part of the reflectivity function, but also the odd part, thus making it possible to reconstruct asymmetric images. Numerical simulations are shown to demonstrate that this solution is not affected by stability problems as other approaches have been. The final chapter develops some continuative ideas that could be pursued in the future.

Qualification and training of quality assurance personnel

International Nuclear Information System (INIS)

Ribeiro da Costa, J.

1980-01-01

Introduction. Qualification and certification: definitions; approach of the problem. A first attempt for its solutions. The 'sample' course; results and conclusions. Planning a comprehensive program: results. Analysis and preliminary conclusions. Absorption of the know-how and planning further programs for training. Development and updating the general training course with the introduction of German experience - summary of results. General planning of a training course for quality and reliability are as for the next courses. Evaluation, grading and final results awarded to participants, as followed in QA-Training courses - certification. Future trends (tentative) - conclusions. (orig./RW)

Employability Skills, Personal Qualities, and Early Employment Problems of Entry-Level Auditors: Perspectives from Employers, Lecturers, Auditors, and Students

Science.gov (United States)

Lim, Yet-Mee; Lee, Teck Heang; Yap, Ching Seng; Ling, Chui Ching

2016-01-01

The authors examine the issue of employability of university accounting students from the perspectives of accounting firm employers, junior auditors, accounting lecturers, and accounting students. Areas of investigation include perceived importance of employability skills and desirable personal qualities; and early employment problems encountered…

Final Exam Weighting as Part of Course Design

Directory of Open Access Journals (Sweden)

Matthew Franke

2018-03-01

Full Text Available The weighting of a final exam or a final assignment is an essential part of course design that is rarely discussed in pedagogical literature. Depending on the weighting, a final exam or assignment may provide unequal benefits to students depending on their prior performance in the class. Consequently, uncritical grade weighting can discount student learning, by ensuring that improved mastery of material at the semester’s end is not reflected in the course grade. Problems related to several common final exam weights are explored, as are potential solutions to unequal student outcomes made possible by uncritical grade weighting. Ultimately, this essay argues that choosing a weight for a final exam or a final assignment determines what types of student success ought to be possible in the class; therefore, instructors should assign exam weights intentionally, being fully aware of the potential benefits and problems of the weights that they choose.

Columbia River final environmental impact statement. Appendix B: Air quality

International Nuclear Information System (INIS)

1995-11-01

The System Operation Review (SOR) is a study and environmental compliance process being used by the three Federal agencies to analyze future operations of the system and river use issues. The goal of the SOR is to achieve a coordinated system operation strategy for the river that better meets the needs of all river users. This technical appendix addresses only the effects of alternative system operating strategies for managing the Columbia River system. This appendix consists of eight chapters. Chapter 1 describes the air quality issues that were raised in the SOR scoping process and provides an overview of the study process used to evaluate air quality effects from various system operation alternatives. Chapter 2 describes the Federal, state, and local programs that regulate air quality and discusses the air quality standards that are relevant to the analysis. It also gives an overview of the limatology of the region and the existing air quality in the Columbia River Basin, including areas of non-attainment for relevant air quality standards. Chapter 3 presents the methods this study uses for the analysis of air quality and for the evaluation of human health effects from air pollutants. Chapter 4 provides the study results for the System Operating Strategy (SOS) alternatives and potential mitigation measures. Chapter 5 compares impacts on air quality and human health across alternatives, and discusses mitigation measures and cumulative effects. Chapters 6, 7, and 8 contain the list of preparers, glossary, and references, respectively. Technical exhibits supporting the analysis are also included

Utilizing Problem Structure in Optimization of Radiation Therapy

International Nuclear Information System (INIS)

Carlsson, Fredrik

2008-04-01

segment shapes and weights is presented in the third paper. Numerical results demonstrate that the adjustment of leaf positions improves the plan quality and that satisfactory treatment plans are found with few segments. The method provides a tool for exploring the trade-off between plan quality and treatment complexity by generating a sequence of deliverable plans of increasing quality. The final paper is devoted to understanding the ability of the column generation approach in the third paper to find near-optimal solutions with very few columns compared to the problem dimension. The impact of different restrictions on the generated columns is studied, both in terms of numerical behaviour and convergence properties. A bound on the two-norm of the columns results in the conjugate-gradient method. Numerical results indicate that the appealing properties of the conjugate-gradient method on ill-conditioned problems are inherited in the column generation approach of the third paper

Further Understanding of the Food Safety Problem

Institute of Scientific and Technical Information of China (English)

Xingxing; MEI; Zhongchao; FENG; Pinghua; HE; Yawen; GAO; Yuqin; DAI

2015-01-01

Frequent occurrence of food quality and safety proves that it is not effective to solve the Problem only from mechanism and supervision mechanism. Instead,it may expand solution ideas from external environment inducing changes of social institutions. Edible agricultural products are raw materials of foods,so their quality and safety are decisive for food quality and safety. Combining with concept of quality and safety of edible agricultural products,from social economy,science,technology and culture,environment cognition,this paper made a further understanding of food quality and safety. It found that the quality and safety of domestic edible agricultural products are not completely resulted from human factor,and not completely quality and safety problem in practical sense. Design of problem solutions should consider such external factors as economic level and consumption concept,dual character of science and technology,cultural quality of the masses,and moral trait of the masses,and enhance matching of building of regulation tools with external environment.

Performance of clustering techniques for solving multi depot vehicle routing problem

Directory of Open Access Journals (Sweden)

Eliana M. Toro-Ocampo

2016-01-01

Full Text Available The vehicle routing problem considering multiple depots is classified as NP-hard. MDVRP determines simultaneously the routes of a set of vehicles and aims to meet a set of clients with a known demand. The objective function of the problem is to minimize the total distance traveled by the routes given that all customers must be served considering capacity constraints in depots and vehicles. This paper presents a hybrid methodology that combines agglomerative clustering techniques to generate initial solutions with an iterated local search algorithm (ILS to solve the problem. Although previous studies clustering methods have been proposed like strategies to generate initial solutions, in this work the search is intensified on the information generated after applying the clustering technique. Besides an extensive analysis on the performance of techniques, and their effect in the final solution is performed. The operation of the proposed methodology is feasible and effective to solve the problem regarding the quality of the answers and computational times obtained on request evaluated literature

A multidisciplinary approach to the air quality and health problems in indoor arenas

Energy Technology Data Exchange (ETDEWEB)

Salonen, R.O.; Pennanen, A.S.; Alm, S.; Randell, J.T.; Haelinen, A.I.; Husman, T.; Jantunen, M.J. [National Public Health Inst., Kuopio (Finland). Div. of Environmental Health; Eklund, T. [Technical Research Centre of Finland, Espoo (Finland); Lee, Kiyoung; Spengler, J.D. [Harvard School of Public Health, Boston (United States). Dept. of Environmental Health

1995-12-31

Most ice resurfacing machines used in indoor ice arenas have internal combustion engines. They use either propane or petrol as fuel. The main exhaust pollutants are carbon monoxide (CO), nitrogen oxides (NO{sub x}), volatile organic compounds (VOC) and fine particles. In general, propane engines emit more NO{sub x} than petrol engines, but their CO emissions are smaller. The levels of these pollutants in indoor air depend on total amount of emissions volume of arena and effectiveness of ventilation. However, due to large variations in engine emissions the air quality in any single arena cannot be estimated without direct measurements. High levels of CO and nitrogen dioxide (NO{sub 2}) have been measured in indoor ice arenas of North America since 1960`s, and it is only recently that high NO{sub 2} levels have been measured also in Sweden. In health studies, attention has been paid mostly to epidemic acute poisonings among ice hockey players and spectators caused by large concentrations of CO. However, some cases of acute NO{sub 2} poisonings have also been described. The aims of this project are: (1) to examine the air quality in Finnish indoor ice arenas, (2) to study associations between the air quality and the major technical features of the arenas, (3) to assess personal exposures of ice hockey players, spectators and maintenance personnel to CO and NO{sub 2}, (4) to investigate short-term and longer-term health effects of CO and NO{sub 2} exposures on ice hockey players and maintenance personnel, (5) to inform the managers of ice arenas and the health authorities on the current air quality problems and health risks in Finnish indoor ice arenas. (author)

A multidisciplinary approach to the air quality and health problems in indoor arenas

Energy Technology Data Exchange (ETDEWEB)

Salonen, R O; Pennanen, A S; Alm, S; Randell, J T; Haelinen, A I; Husman, T; Jantunen, M J [National Public Health Inst., Kuopio (Finland). Div. of Environmental Health; Eklund, T [Technical Research Centre of Finland, Espoo (Finland); Lee, Kiyoung; Spengler, J D [Harvard School of Public Health, Boston (United States). Dept. of Environmental Health

1996-12-31

Most ice resurfacing machines used in indoor ice arenas have internal combustion engines. They use either propane or petrol as fuel. The main exhaust pollutants are carbon monoxide (CO), nitrogen oxides (NO{sub x}), volatile organic compounds (VOC) and fine particles. In general, propane engines emit more NO{sub x} than petrol engines, but their CO emissions are smaller. The levels of these pollutants in indoor air depend on total amount of emissions volume of arena and effectiveness of ventilation. However, due to large variations in engine emissions the air quality in any single arena cannot be estimated without direct measurements. High levels of CO and nitrogen dioxide (NO{sub 2}) have been measured in indoor ice arenas of North America since 1960`s, and it is only recently that high NO{sub 2} levels have been measured also in Sweden. In health studies, attention has been paid mostly to epidemic acute poisonings among ice hockey players and spectators caused by large concentrations of CO. However, some cases of acute NO{sub 2} poisonings have also been described. The aims of this project are: (1) to examine the air quality in Finnish indoor ice arenas, (2) to study associations between the air quality and the major technical features of the arenas, (3) to assess personal exposures of ice hockey players, spectators and maintenance personnel to CO and NO{sub 2}, (4) to investigate short-term and longer-term health effects of CO and NO{sub 2} exposures on ice hockey players and maintenance personnel, (5) to inform the managers of ice arenas and the health authorities on the current air quality problems and health risks in Finnish indoor ice arenas. (author)

Power Quality Problems Mitigation using Dynamic Voltage Restorer in Egypt Thermal Research Reactor (ETRR-2)

International Nuclear Information System (INIS)

Kandil, T.; Ayad, N.M.; Abdel Haleam, A.; Mahmoud, M.

2013-01-01

Egypt thermal research reactor (ETRR-2) was subjected to several Power Quality Problems such as voltage sags/swells, harmonics distortion, and short interruption. ETRR-2 encompasses a wide range of loads which are very sensitive to voltage variations and this leads to several unplanned shutdowns of the reactor due to trigger of the Reactor Protection System (RPS). The Dynamic Voltage Restorer (DVR) has recently been introduced to protect sensitive loads from voltage sags and other voltage disturbances. It is considered as one of the most efficient and effective solution. Its appeal includes smaller size and fast dynamic response to the disturbance. This paper describes a proposal of a DVR to improve power quality in ETRR-2 electrical distribution systems . The control of the compensation voltage is based on d-q-o algorithm. Simulation is carried out by Matlab/Simulink to verify the performance of the proposed method

Chemical engineering problems of radioactive waste fixation by vitrification

International Nuclear Information System (INIS)

Taylor, R.F.

1985-01-01

Basic features are reviewed of the chemical engineering problems faced in the vitrification of the high-level radioactive liquid wastes resulting from the reprocessing of nuclear fuel. After an outline of glass solution properties and formation kinetics the constituent elements of the vitrification route are examined in turn: waste feed evaporation and denitration, calcination, offgas treatment, and finally melting and product quality. Plant and experimental data for each stage are discussed with comparison between process routes and with reference to the underlying principles. Attention is drawn to the future need for higher trapping efficiencies and for dealing with a wider range of species in offgas treatments as higher burnup fuels are processed after shorter cooling times from reactor. Two areas of present study where deeper insight into underlying process mechanics is needed are, firstly, the association of waste material with glass formers in the wet or sinter stages and secondly their incorporation and mixing reaction in the melt. Fuller understanding here would bring direct benefit to process performance and handling. The problems discussed are not of a nature to jeopardize the vitrification routes but if product quality does come to rely heavily on process control then demonstrable confidence in the behaviour of the central physico-chemical interactions is indispensable. (author)

[Problems with Using Hospital Quality Reports as a Secondary Data Source for Health Services Research in Germany].

Science.gov (United States)

Kraska, R A; de Cruppe, W; Geraedts, M

2017-07-01

Background Since 2005, German hospitals are required by law to publish structured quality reports (QRs). Because of the detailed data basis, the QRs are being increasingly used for secondary data analyses in health services research. Up until now, methodological difficulties that can cause distorted results of the analyses have essentially been overlooked. The aim of this study is to systematically list the methodological problems associated with using QR and to suggest solution strategies. Methods The QRs from 2006-2012 form the basis of the analyses and were aggregated in a database using an individualized data linkage procedure. Thereafter, a correlation analysis between a quality indicator and the staffing of hospitals was conducted, serving as an example for both cross-sectional as well as longitudinal studies. The resulting methodological problems are described qualitatively and quantitatively, and potential solutions are derived from the statistical literature. Results In each reporting year, 2-15% of the hospitals delivered no QR. In 2-16% of the QRs, it is not recognizable whether a report belongs to a hospital network or a single location. In addition, 6-66% of the location reports falsely contain data from the hospital network. 10% of the hospitals changed their institution code (IC), in 5% of the cases, the same "IC-location-number-combination" was used for different hospitals over the years. Therefore, 10-20% of the QRs cannot be linked with the IC as key variable. As a remedy for the linking of QR, the combination of the IC, the address and the number of beds represents a suitable solution. Using this solution, hospital network reports, location reports and missing reports can be identified and considered in an analysis. Conclusions Secondary data analyses with quality reports provide a high potential for error due to the inconsistent data base and the problems of the data linkage procedure. These can distort calculated parameters and limit the

Design of a Quality Control Program for the Measurement of Gross Alpha and Gross Beta Activities (LMPR-CIEMAT)

International Nuclear Information System (INIS)

Alvarez, A.; Yague, L.; Gasco, C.; Navarro, N.; Higueras, E.; Noguerales, C.

2010-01-01

In accordance with international standards, general requirements for testing laboratories have to include a quality system for planning, implementing, and assessing the work performed by the organization and for carrying out required quality assurance and quality control. The purpose of internal laboratory quality control is to monitor performance, identify problems, and initiate corrective actions. This report describes the internal quality control to monitor the gross alpha and beta activities determination. Identification of specific performance indicators, the principles that govern their use and statistical means of evaluation are explained. Finally, calculation of alpha and beta specific activities, uncertainties and detection limits are performed. (Author) 10 refs.

Overt and subtle discrimination, subjective well-being and physical health-related quality of life in an obese sample.

Science.gov (United States)

Magallares, Alejandro; Benito de Valle, Pilar; Irles, Jose Antonio; Jauregui-Lobera, Ignacio

2014-10-27

Obesity represents a serious health issue affecting millions of people in Western industrialized countries. The severity of the medical problems it causes is paralleled by the fact that obesity has become a social stigma that affects the psychological health-related quality of life of individuals with weight problems. Our study, with 111 obese patients of a Spanish hospital, focused specifically on how overt and subtle discrimination is related to subjective well-being (affect balance and life satisfaction) and physical health-related quality of life. It was shown that overt (r = -.28, p life satisfaction) and subtle discrimination (r = -.28, p life satisfaction) were negatively linked with subjective well-being, and that there was a negative correlation between overt discrimination and physical health-related quality of life (r = -.26, p quality of life and subjective well-being using the Baron and Kenny procedure. Finally, it is discussed the relationship between discrimination, subjective well-being and physical health-related quality of life in obese people.

Power quality assessment

International Nuclear Information System (INIS)

Fathi, H.M.E.

2012-01-01

The electrical power systems are exposed to different types of power quality disturbances problems. Assessment of power quality is necessary for maintaining accurate operation of sensitive equipment's especially for nuclear installations, it also ensures that unnecessary energy losses in a power system are kept at a minimum which lead to more profits. With advanced in technology growing of industrial / commercial facilities in many region. Power quality problems have been a major concern among engineers; particularly in an industrial environment, where there are many large-scale type of equipment. Thus, it would be useful to investigate and mitigate the power quality problems. Assessment of Power quality requires the identification of any anomalous behavior on a power system, which adversely affects the normal operation of electrical or electronic equipment. The choice of monitoring equipment in a survey is also important to ascertain a solution to these power quality problems. A power quality assessment involves gathering data resources; analyzing the data (with reference to power quality standards); then, if problems exist, recommendation of mitigation techniques must be considered. The main objective of the present work is to investigate and mitigate of power quality problems in nuclear installations. Normally electrical power is supplied to the installations via two sources to keep good reliability. Each source is designed to carry the full load. The Assessment of power quality was performed at the nuclear installations for both sources at different operation conditions. The thesis begins with a discussion of power quality definitions and the results of previous studies in power quality monitoring. The assessment determines that one source of electricity was deemed to have relatively good power quality; there were several disturbances, which exceeded the thresholds. Among of them are fifth harmonic, voltage swell, overvoltage and flicker. While the second

Ostomy-related problems and their impact on quality of life of colorectal cancer ostomates: a systematic review.

Science.gov (United States)

Vonk-Klaassen, Sylvia M; de Vocht, Hilde M; den Ouden, Marjolein E M; Eddes, Eric Hans; Schuurmans, Marieke J

2016-01-01

Many long-term ostomates are 'out-of-sight' of healthcare, and it is unknown how ostomates deal with ostomy-related problems and how these problems affect their quality of life (QOL). The aim is to examine patient-related studies describing ostomy-related problems and their impact on the perceived QOL of long-term colostomates. The electronic databases PubMed (MEDLINE), CINAHL, Cochrane Library and PsycINFO were systematically searched. All studies were included in which ostomy-specific QOL was measured using validated multidimensional instruments. Of the 6447 citations identified, 14 prevailingly descriptive cross-sectional studies were included. Three different validated multidimensional instruments for measuring QOL in ostomates were used (EORTC C30/CR38, MCOHQOLQO, Stoma QOL Questionnaire). All studies demonstrated that living with a colostomy influences the overall QOL negatively. The ostomy-related problems described included sexual problems, depressive feelings, gas, constipation, dissatisfaction with appearance, change in clothing, travel difficulties, feeling tired and worry about noises. In conclusion, all 14 studies gave an indication of the impact of ostomy-related problems on the perceived QOL and demonstrated that a colostomy influences the QOL negatively. There is a wide range of ostomy-specific QOL scores, and there seem to be higher QOL scores in the studies where the MCOHQOLQO instrument was used. The MCOHQOLQO and the Stoma QOL Questionnaire gave the most detailed information about which ostomy-related problems were experienced. This review adds knowledge about the impact of stoma-related problems on QOL of long-term ostomates, but more research has to be conducted, to detect ostomy-related problems and especially possible care needs.

Direct and inverse source problems for a space fractional advection dispersion equation

KAUST Repository

Aldoghaither, Abeer

2016-05-15

In this paper, direct and inverse problems for a space fractional advection dispersion equation on a finite domain are studied. The inverse problem consists in determining the source term from final observations. We first derive the analytic solution to the direct problem which we use to prove the uniqueness and the unstability of the inverse source problem using final measurements. Finally, we illustrate the results with a numerical example.

Comparison of Quality of Life and Social Skills between Students with Visual Problems (Blind and Partially Blind) and Normal Students

OpenAIRE

Fereshteh Kordestani; Azam Daneshfar; Davood Roustaee

2014-01-01

This study aimed to compare the quality of life and social skills between students who are visually impaired (blind and partially blind) and normal students. The population consisted of all students with visual problems (blind and partially blind) and normal students in secondary schools in Tehran in the academic year 2013-2014. Using a multi-stage random sampling method, 40 students were selected from each group. The SF-36s quality of life questionnaire and Foster and Inderbitzen social skil...

The growth of public debt in Italy: past experience, perspectives and policy problems

Directory of Open Access Journals (Sweden)

Lugi Spaventa

2013-09-01

Full Text Available The work surveys the Italian experience with reference to growth and public debt. It does not seek to test conflicting views, as the effects of some financial and policy innovations are too recent and some data is of poor quality. Rather, its more limited scope is to draw on past experience and, more importantly, assess future prospects in order to discuss some problems regarding both fiscal and monetary policy. The author examines debt formation with reference to borrowing requirements, their composition and their adjusted measure, before taking into consideration financing policies pursued by the authorities and the changes in the composition, ownership and cost of debt. Finally, possible future developments and some connected policy problems are examined.

Popular Problems

DEFF Research Database (Denmark)

Skovhus, Randi Boelskifte; Thomsen, Rie

2017-01-01

This article introduces a method to critical reviews and explores the ways in which problems have been formulated in knowledge production on career guidance in Denmark over a 10-year period from 2004 to 2014. The method draws upon the work of Bacchi focussing on the ‘What's the problem represented...... to be’ (WPR) approach. Forty-nine empirical studies on Danish youth career guidance were included in the study. An analysis of the issues in focus resulted in nine problem categories. One of these, ‘targeting’, is analysed using the WPR approach. Finally, the article concludes that the WPR approach...... provides a constructive basis for a critical analysis and discussion of the collective empirical knowledge production on career guidance, stimulating awareness of problems and potential solutions among the career guidance community....

Development, problem behavior, and quality of life in a population based sample of eight-year-old children with down syndrome

NARCIS (Netherlands)

Gameren-Oosterom, H.B.M. van; Fekkes, M.; Buitendijk, S.E.; Mohangoo, A.D.; Bruil, J.; Wouwe, J.P. van

2011-01-01

Objective: Children with Down syndrome (DS) have delayed psychomotor development. We investigated levels of development, problem behavior, and Health-Related Quality of Life (HRQoL) in a population sample of Dutch eight-year-old children with DS. Developmental outcomes were compared with normative

The Fourth/Final-Year University Student Future Professional Career: Analysis of Factors and Personal Qualities

Directory of Open Access Journals (Sweden)

V. Lamanauskas

2017-12-01

Full Text Available Career management as a lifelong lasting process becomes very actual in today's modern society because of many reasons. The environment becomes turbulent, in a general sense; therefore, it is natural that career environment, basically, is chaotic as well. Nevertheless, career for many people is, undoubtedly, very important, because it is directly related to life quality. Professional activity satisfies almost all human needs: physiological, safety, social, attainment, self-realisation, independence, autonomy and other. The efficiency of the mentioned activity and the ability of the personality to construct his career are closely related things. Individual's career process studies are especially popular recently, because deeper career perception helps to understand the most important relations between man and work, career management and constant learning, helps not only to know man's abilities, but also the abilities to give oneself to modern environment, to understand career projection possibilities, to plan one's professional future. Seeking to analyse final-year university student position regarding career questions, a written form survey was carried out. The research was carried out between September 2015 and March 2016. The research sample (185 was structured applying a consecutive 'bunch' system. The respondents from three Lithuanian universities Klaipėda, Vilnius and Šiauliai, were selected in the sample. Professional career parameters were evaluated: career conception, the importance of work values and abilities, study influence, promoting and limiting factors and personal qualities. The research is grounded on a mixed strategy, when quantitative and qualitative research approach is combined. The obtained results, based on qualitative analysis, about professional personal career promoting and limiting factors and personal qualities are presented in this research.

Transmutation of radioactive wastes from nuclear power plants. A contribution to the reduction of the final repository problem; Transmutation radioaktiver Reststoffe aus Kernkraftwerken. Ein Beitrag zur Verringerung der Endlagerproblematik

Energy Technology Data Exchange (ETDEWEB)

Mach, Manfred [Technische Univ. Berlin (Germany). Inst. fuer Technologie und Management

2015-07-01

The brochure on transmutation of radioactive wastes from nuclear power plants - a contribution to the reduction of the final repository problem covers the following issues: What is transmutation? Nuclear power in Germany; energy density of fuels; time span of energy resources; CO{sub 2} emissions from different energy sources; types of nuclear power plants in Germany; cost of German electricity generation plants; nuclear power plants worldwide; wastes from nuclear electricity production; radiation from fission products; radiation effects on humans, the nuclear fuel cycle, direct final disposal of radioactive wastes; risk assessment of the direct final disposal; partitioning of actinides; transmutation of actinides.

COLLABORATIVE TRIAL AND QUALITY CONTROL IN CHEMICAL ANALYSIS

Directory of Open Access Journals (Sweden)

Narsito Narsito

2010-06-01

Full Text Available Abstract                                                             This paper deals with some practical problems related to the quality of analytical chemical data usually met in practice. Special attention is given to the topic of quality control in analytical chemistry, since analytical data is one of the primary information from which some important scientifically based decision are to be made. The present paper starts with brief description on some fundamental aspects associated with quality of analytical data, such as sources of variation of analytical data, criteria for quality of analytical method, quality assurance in chemical analysis. The assessment of quality parameter for analytical method like the use of standard materials as well as standard methods is given. Concerning with the quality control of analytical data, the use of several techniques, such as control samples and control charts, in monitoring analytical data in quality control program are described qualitatively.  In the final part of this paper, some important remarks for the preparation of collaborative trials, including the evaluation of accuracy and reproducibility of analytical method are also given Keywords: collaborative trials, quality control, analytical data Abstract                                                             This paper deals with some practical problems related to the quality of analytical chemical data usually met in practice. Special attention is given to the topic of quality control in analytical chemistry, since analytical data is one of the primary information from which some important scientifically based decision are to be made. The present paper starts with brief description on some fundamental aspects associated with quality of analytical data, such as sources of variation of analytical data, criteria for quality of

Problems of administration of ACCOUNTING OF QUALITY OF LANDs in system of state land of Ukraine

Directory of Open Access Journals (Sweden)

Tykhenko O.V.

2016-08-01

Full Text Available Conditions of land resources of Ukraine and quality of soil getting worse, increasing areas of technogenic pollution. Uncontrolled land use leads to deterioration of soil fertility. To maintain a high level of natural properties of lands is necessary to monitor over their use, which can be achieved by accounting of land quality. Information about the quantity and quality of lands summarizing by the central executive authority that implements the state policy in the sphere of land relations. Summarized information on the quantity and quality of land on gratis personnel provided to state authorities and local governments according to Order of conducting of State Land Cadastre. One of the main problems of accounting quality of lands is in Ukraine now is not only the absence of regulatory documents, but also the reliability of available information According to it’s providing is necessary of availability of actual information about the status of land resources. The absence of qualitative characteristics land plots in cadastral system complicates state control over land use and protection, because there are no grounds for levy fines for the catastrophic decline of soil fertility. One of the layers of Public Cadastral Map of Ukraine are soils. Nowadays is approved by the Cabinet of Ministers of Ukraine ( № 1051 nomenclature list of agro-industrial group of soils, which includes 222 of the agro groups with deciphering by granulometric composition. If with soil units identified, so the indicators that characterize them more difficult. That indicators, which were the basis for accounting of the quality of lands should check up to modern realities and condition of soils. According to the Law of Ukraine "On Land Protection", in the field of land protection and restoration of soil fertility establishes the following standards: maximum allowable soil contamination; qualitative condition of soils; the optimum ratio of lands; indicators of land and soils

Problems and prospects of neutron imaging

International Nuclear Information System (INIS)

Kobayashi, Hisao

2008-01-01

Technical problems and future prospects of neutron imaging and neutron radiography are reviewed and discussed for further development. For technical problems, neutron sources together with cold neutron, ultra-cold neutron, epithermal and fast-neutron beams, energy converters, and the intensity of neutron beam, dynamic range associated with imaging procedure, etc, are reviewed. As standardization, such indicators as beam purity, sensitivity, image quality, and beam quality are discussed and limitation of neutron radiography is also presented. As neutron imaging has developed as a nondestructive testing technique in industrial applications, further problems and prospects of quality control and qualification to perform neutron radiography, standardization and international cooperation of neutron imaging are discussed. (S. Ohno)

Quality of Life in Persons with Intellectual Disabilities and Mental Health Problems: An Explorative Study

Directory of Open Access Journals (Sweden)

Filip Morisse

2013-01-01

Full Text Available The field of intellectual disability (ID is strongly influenced by the Quality of Life paradigm (QOL. We aimed at investigating whether or not the QOL paradigm also applies to clients with ID and cooccurring mental health problems. This paper aims at stimulating a debate on this topic, by investigating whether or not QOL domains are universal. Focus groups with natural and professional network members were organized to gather qualitative data, in order to answer two questions: (1 Are the QOL dimensions conceptualized in the model of Schalock et al. applicable for persons with ID and mental health problems? (2 What are indicators relating to the above-mentioned dimensions in relation to persons with ID and mental health problems? The results offer some proof for the assumption that the QOL construct seems to have universal properties. With regard to the second question, the study revealed that the natural and professional network members are challenged to look for the most appropriate support strategies, taking specific indicators of QOL into account. When aspects of empowerment and regulation are used in an integrated manner, the application of the QOL paradigm could lead to positive outcomes concerning self-determination, interdependence, social inclusion, and emotional development.

Perceptions of final-year nursing students on the facilities, resources and quality of education provided by schools in Turkey.

Science.gov (United States)

Güner, Perihan

2015-01-01

The purpose of this study is to determine the perceptions of final-year nursing students regarding the adequacy of education, resources and internships in preparation for graduation. The study design was a descriptive cross-sectional study of nursing students (n: 1804) in their final year of education and questionnaires were used to collect data. Information related to student-to-instructor ratios and internships was obtained from each institution. Most students reported receiving instruction or supervision by lecturers and clinicians who did not specialise in the field. Overall, students did not find the facilities, educational or technological resources and the quality of education offered by their respective schools adequate. The proportion of students who found the level of theoretical education, clinical practice and instructor support adequate was higher in state university colleges of nursing/faculties of health sciences than in state university schools of health sciences.

Problems in laser repair welding of polished surfaces

Directory of Open Access Journals (Sweden)

A. Skumavc

2014-10-01

Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

Combining FMEA with DEMATEL models to solve production process problems.

Science.gov (United States)

Tsai, Sang-Bing; Zhou, Jie; Gao, Yang; Wang, Jiangtao; Li, Guodong; Zheng, Yuxiang; Ren, Peng; Xu, Wei

2017-01-01

Failure mode and effects analysis (FMEA) is an analysis tool for identifying and preventing flaws or defects in products during the design and process planning stage, preventing the repeated occurrence of problems, reducing the effects of these problems, enhancing product quality and reliability, saving costs, and improving competitiveness. However, FMEA can only analyze one influence factor according to its priority, rendering this method ineffective for systems containing multiple FMs whose effects are simultaneous or interact with one another. Accordingly, when FMEA fails to identify the influence factors and the factors being influenced, the most crucial problems may be placed in lower priority or remain unresolved. Decision-Making Trial and Evaluation Laboratory (DEMATEL) facilitates the determination of cause and effect factors; by identifying the causal factors that should be prioritized, prompt and effective solutions to core problems can be derived, thereby enhancing performance. Using the photovoltaic cell manufacturing industry in China as the research target, the present study combined FMEA with DEMATEL to amend the flaws of FMEA and enhance its effectiveness. First, FMEA was used to identify items requiring improvement. Then, DEMATEL was employed to examine the interactive effects and causal relationships of these items. Finally, the solutions to the problems were prioritized. The proposed method effectively combined the advantages of FMEA and DEMATEL to facilitate the identification of core problems and prioritization of solutions in the Chinese photovoltaic cell industry.

Quality control of recycled asphaltic concrete : final report.

Science.gov (United States)

1982-07-01

This study examined the variations found in recycled asphaltic concrete mix based upon plant quality control data and verification testing. The data was collected from four recycled hot-mix projects constructed in 1981. All plant control and acceptan...

Relationships between parental sleep quality, fatigue, cognitions about infant sleep, and parental depression pre and post-intervention for infant behavioral sleep problems.

Science.gov (United States)

Hall, Wendy A; Moynihan, Melissa; Bhagat, Radhika; Wooldridge, Joanne

2017-04-04

Maternal and paternal depression has been associated with infants' behavioral sleep problems. Behavioral sleep interventions, which alter parental cognitions about infant sleep, have improved infant sleep problems. This study reports relationships between parental depression, fatigue, sleep quality, and cognitions about infant sleep pre and post-intervention for a behavioral sleep problem. This secondary analysis of data from Canadian parents (n = 455), with healthy infants aged 6-to-8-months exposed to a behavioral sleep intervention, examined baseline data and follow-up data from 18 or 24 weeks post intervention (group teaching or printed material) exposure. Parents reported on sleep quality, fatigue, depression, and cognitions about infant sleep. Data were analyzed using Pearson's r and stepwise regression analysis. Parents' fatigue, sleep quality, sleep cognitions, and depression scores were correlated at baseline and follow-up. At baseline, sleep quality (b = .52, 95% CI .19-.85), fatigue (b = .48, 95% CI .33-.63), doubt about managing infant sleep (b = .44, 95% CI .19-.69), and anger about infant sleep (b = .69, 95% CI .44-.94) were associated with mothers' depression. At baseline, fathers' depression related to sleep quality (b = .42, 95% CI .01-.83), fatigue (b = .47, 95% CI .32-.63), and doubt about managing infant sleep (b = .50, 95% CI .24-.76). At follow-up, mothers' depression was associated with sleep quality (b = .76, 95% CI .41-1.12), fatigue (b = .25, 95% CI .14-.37), doubt about managing infant sleep (b = .44, 95% CI .16-.73), sleep anger (b = .31, 95% CI .02-.59), and setting sleep limits (b = -.22, 95% CI -.41-[-.03]). At follow-up, fathers' depression related to sleep quality (b = .84, 95% CI .46-1.22), fatigue (b = .31, 95% CI .17-.45), sleep doubt (b = .34, 95% CI .05-.62), and setting sleep limits (b = .25, 95% CI .01-.49). Mothers' and fathers' cognitions about infant

Development of a health-based air quality index for Canada : public opinion research 2004-05 : final report

International Nuclear Information System (INIS)

2005-05-01

Canadians rely on an air quality indexes (AQIs) to inform them about air pollution conditions in their communities. However, there is no AQI common to all of Canada, and there is a lack of consistency in the way in which air quality is calculated and reported, as well as in the use of health-based messages. This paper reported findings of a public opinion research survey conducted to gauge Canadians' awareness, perceptions and behavioural responses to air quality, air pollution and AQIs. The aim of the study was to guide the development of health messages to more effectively communicate the AQI to Canadians with respect to the health risks associated with poor air quality. Telephone surveys were conducted immediately following a poor air quality episode to measure the public's awareness and response to these events, as well as residents' general awareness and use of AQIs. A separate research project was then conducted which consisted of in-depth qualitative interviews with 28 individuals recruited from the general population. A comprehensive national telephone survey was then conducted following the summer 2004 'smog season', which focused on the public's awareness of air pollution and AQIs. Results from the first 2 phases of the research were then presented at a workshop comprised of health and environmental communities specializing in air issues in Canada. Focus groups were then held to test public reaction to new AQI communications concepts derived from the research. Results indicated that Canadians widely identify air pollution as a significant environmental problem. However, the information from AQIs had a limited impact in terms of prompting actions to reduce personal exposure. A new type of national AQI for Canada was developed that conveyed information on air quality conditions and their significance. Key features include a 0 to 10 point unbounded scale showing current air quality conditions; a forecast of future conditions; standardized information

California State Implementation Plan; Final Approval of Revision; Yolo-Solano Air Quality Management District; Reasonably Available Control Technology Requirements for 1997 8-hour Ozone NAAQS

Science.gov (United States)

EPA is taking final action to approve a revision to the Yolo-Solano Air Quality Management District (YSAQMD) portion of the California SIP concerning YSAQMD regarding RACT)requirements the 1997 8-hour ozone NAAQS and approve negative declarations into SIP.

Principles of urban quality of life for a neighborhood

Directory of Open Access Journals (Sweden)

Hamam Serag El Din

2013-04-01

Full Text Available Urban quality of life is a notion that has been discussed recently in various studies as a response to many problems facing the new towns all over the world as well as in Egypt. The purpose of this paper is to decompose the term urban quality of life into other more precise terms such as quality, quality of life and urban/urban planning. The paper also aims to address the notion of sustainable development and tries to understand its relationship with the notion of quality of life. Further, it deduces urban quality of life definition and dimensions. On the other hand this paper discusses contemporary urban planning theories and approaches raised in the late of twentieth century in order to provide a high and sustainable quality of life and protect the natural environment. Finally, a matrix concluding the relationship between the principles of these contemporary urban planning theories and approaches and urban quality of life dimensions is developed, in order to achieve a set of principles that address environmental, physical, mobility, social, psychological, economical and political concerns called urban quality of life principles. These principles represent a guide useful for participants of the design process and for policy makers.

Creativity for Problem Solvers

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui

2009-01-01

This paper presents some modern and interdisciplinary concepts about creativity and creative processes specially related to problem solving. Central publications related to the theme are briefly reviewed. Creative tools and approaches suitable to support problem solving are also presented. Finally......, the paper outlines the author’s experiences using creative tools and approaches to: Facilitation of problem solving processes, strategy development in organisations, design of optimisation systems for large scale and complex logistic systems, and creative design of software optimisation for complex non...

Severe interpersonal violence against children in sport: Associated mental health problems and quality of life in adulthood.

Science.gov (United States)

Vertommen, Tine; Kampen, Jarl; Schipper-van Veldhoven, Nicolette; Uzieblo, Kasia; Van Den Eede, Filip

2018-02-01

In a recent large-scale prevalence study of interpersonal violence (IV) against child athletes in the Netherlands and Belgium we found that 9% of adult respondents who participated in organized sports before the age of 18 had experienced severe psychological violence, 8% severe physical violence, and 6% severe sexual violence in various sport settings. While the general literature has repeatedly shown that exposure to IV during childhood is associated with mental health problems in adulthood and to a lesser extent with reduced quality of life (QOL), these relationships have not been demonstrated in (former) athletes. Thus, the current study aims to assess the association of severe childhood IV in sport and adult wellbeing. Depression, anxiety, and somatization were assessed in the same general population sample (N = 4043) using the Brief Symptom Inventory (BSI-18) and QOL with the World Health Organization Quality of Life questionnaire (WHOQOL-Brèf). The association between severe IV in sport and adult wellbeing was investigated using multiple linear regression while controlling for demographics, recent life events, and relatives' psychological problems. We found severe sexual, physical, and psychological childhood IV in sport to be associated with more adult psychological distress and reduced QOL. Polyvictimization shows the strongest correlation with poorer wellbeing and QOL. Recent life events, relatives' psychological problems, marital status, and level of education were significant covariates in the psychological symptoms and QOL assessed. We hope that these new insights prompt sport administrators to implement broad spectrum child protection measures and raise the awareness of mental health professionals about the necessity to also screen for adverse childhood experiences in the sport context. Copyright © 2017 Elsevier Ltd. All rights reserved.

Requirements of quality standards

International Nuclear Information System (INIS)

Mueller, J.

1977-01-01

The lecture traces the development of nuclear standards, codes, and Federal regulations on quality assurance (QA) for nuclear power plants and associated facilities. The technical evolution of the last twelve years, especially in the area of nuclear technology, led to different activities and regulatory initiatives, and the present result is: several nations have their own homemade standards. The lecture discusses the former and especially current activities in standard development, and gives a description of the requirements of QA-standards used in USA and Europe, especially Western Germany. Furthermore the lecture attempts to give a comparison and an evaluation of the international quality standards from the author's viewpoint. Finally the lecture presents an outlook for the future international implications of QA-standards. There is an urgent need within the nuclear industry for simplification and standardization of QA-standards. The relationship between the various standards, and the applicability of the standards need clarification and a better transparancy. To point out these problems is the purpose of the lecture. (orig.) [de

Radioactive waste products - suitability for final disposal

International Nuclear Information System (INIS)

Merz, E.; Odoj, R.; Warnecke, E.

1985-06-01

48 papers were read at the conference. Separate records are available for all of them. The main problem in radioactive waste disposal was the long-term sealing to prevent pollution of the biosphere. Problems of conditioning, acceptance, and safety measures were discussed. Final disposal models and repositories were presented. (PW) [de

Problem-focused coping and self-efficacy as correlates of quality of life and severity of fibromyalgia in primary fibromyalgia patients.

Science.gov (United States)

Alok, Ragini; Das, Siddharth Kumar; Agarwal, Girdhar Gopal; Tiwari, Sarvada Chand; Salwahan, Latika; Srivastava, Ragini

2014-09-01

Patients with fibromyalgia syndrome (FMS) often experience problems such as poor quality of life (QoL), loss of self-efficacy (SE), inappropriate coping behavior, and chronic widespread pain along with other symptoms. Recent studies have indicated that sense of SE and effective coping strategies (CSs) are the crux on which the management of chronic pain and enrichment of QoL of FMS patients depend. Realizing the importance of this subject for the rehabilitation of the people with FMS, this study aimed at analyzing the correlation between severity of FMS, and QoL, SE, and CSs among the patients of FMS. One hundred patients with fibromyalgia (FM) and 100 control subjects were studied. Fibromyalgia Impact Questionnaire-Revised, Quality of Life Scale, Arthritis Self-efficacy Scale, and COPE Scales for CSs were administered to both the groups. Significantly lower SE, poor QoL, and less use of CSs were reported by FM patients (P Fibromyalgia Impact Questionnaire-Revised, namely, pain, function, and symptoms, were found to be significantly and negatively associated with problem-focused coping (P < 0.05), SE (P < 0.01), and QoL (P < 0.01). This study confirms that problem-focused CSs and SE are important correlates of QoL and severity of FM in Indian as well as other populations.

Quality assurance plan for Final Waste Forms project in support of the development, demonstration, testing and evaluation efforts associated with the Oak Ridge reservation's LDR/FFCA compliance

International Nuclear Information System (INIS)

Gilliam, T.M.; Mattus, C.H.

1994-07-01

This quality assurance project plan specifies the data quality objectives for Phase I of the Final Waste Forms Project and defines specific measurements and processes required to achieve those objectives. Although the project is funded by the U.S. Department of Energy (DOE), the ultimate recipient of the results is the U.S. Environmental Protection Agency (EPA). Consequently, relevant quality assurance requirements from both organizations must be met. DOE emphasizes administrative structure to ensure quality; EPA's primary focus is the reproducibility of the generated data. The ten criteria of DOE Order 5700.6C are addressed in sections of this report, while the format used is that prescribed by EPA for quality assurance project plans

Effects of School Quality, School Citizenship Policy, and Student Body Composition on the Acquisition of Citizenship Competences in the Final Year of Primary Education

Science.gov (United States)

Dijkstra, Anne Bert; Geijsel, Femke; Ledoux, Guuske; van der Veen, Ineke; ten Dam, Geert

2015-01-01

This study examines the effects of general educational quality of schools, school citizenship policy, and ethnic homogeneity of the student body on the acquisition of citizenship competences in the final year of primary education. The theoretical framework is based on developmental, psychological, and sociological studies into effects of social…

Overview of Power Quality and Integrated Testing at JSC

Science.gov (United States)

Davies, Francis

2018-01-01

This presentation describes the basic philosophy behind integrated testing and partially integrated testing. It lists some well known errors in space systems that were or could have been caught during integrated testing. Two examples of integrated testing at the Johnson Space Center (JSC) are mentioned, and then an overview of two test facilities that do power testing (partially integrated testing) at JSC are presented, with information on the capabilities of each. Finally a list of three projects that has problems caught during power quality or Electromagnetic Interference (EMI) testing is presented.

The Solving of Problems in Chemistry: the more open-ended problems

Science.gov (United States)

Reid, Norman; Yang, Mei-Jung

2002-01-01

Most problem solving in chemistry tends to be algorithmic in nature, while problems in life tend to be very open ended. This paper offers a simple classification of problems and seeks to explore the many factors which may be important in the successful solving of problems. It considers the place of procedures and algorithms. It analyses the role of long-term memory, not only in terms of what is known, but how that knowledge was acquired. It notes the great importance of the limitations of working memory space and the importance of confidence which comes from experience. Finally, various psychological factors are discussed. This paper argues that solving open-ended problems is extremely important in education and that offering learners experience of this in a group work context is a helpful way forward.

Associations between Psychological Problems and Quality of Life in Pediatric Short Stature from Patients’ and Parents’ Perspectives

Science.gov (United States)

Bullinger, Monika; Sommer, Rachel; Rohenkohl, Anja Christine; Bernardino Da Silva, Neuza Maria

2016-01-01

Short stature has been associated with psychosocial impairments, but whether treatments and achieved height impact on health-related quality of life (HrQoL) and psychological functioning of children/adolescents is still controversial. This study aimed to examine the effects of height deviation and treatment status on psychosocial adaptation outcomes and to identify clinical and psychosocial determinants of internalizing/externalizing problems in a large cohort of short statured children/adolescents from seven European countries. Participants were 345 children aged 8–18 years with a clinical diagnosis of short stature and 421 parents of 4–18 year-old patients. Children and parents reported on psychological problems (Strengths and Difficulties Questionnaire), generic (KIDSCREEN) and condition-specific HrQoL (QoLISSY). According to analyses of covariance, children/adolescents with current short stature presented more parent-reported internalizing problems and lower self- and parent-reported condition-specific HrQoL, compared to patients with an achieved height above -2SD. Treated children self-reported better HrQoL than the untreated group. Hierarchical regression analysis showed that, rather than height–related clinical variables, children’s sex, younger age and poorer HrQoL were the best predictors of psychological problems, explaining 39% of the variance in patient- and 42% in parent-reported internalizing problems, and 22% of the variance in patient- and 24% in parent-reported externalizing problems. Treatment status also moderated the negative links between patient-reported HrQoL and internalizing problems, explaining 2% of additional variance. These results suggest that children with current short stature are at greater risk for internalizing problems. Routine assessment of HrQoL in pediatric healthcare may help identify children for referral to specialized psychological assessment and intervention. PMID:27097033

LHC Report: finalizing the shutdown activities

CERN Multimedia

CERN Bulletin

2011-01-01

The maintenance work and other activities scheduled for the LHC technical stop have now been completed and the electrical, quality assurance and powering tests are in full swing.   These hardware tests, or hardware re-commissioning as it is known in the CERN Control Centre, are complete for Sectors 5-6 and 6-7. The re-commissioning process is almost complete in Sectors 7-8 and 8-1, but a problem with the emergency stop safety system last week, and the failure of a turbine in the cryogenic plant at Point 8, mean that the final part of the re-commissioning for these two sectors has been delayed and will be completed this week. Preparations for the re-commissioning in the other 4 sectors are going well, and everything is on schedule for the LHC to restart with beam as planned on 18 February. At the SPS, all the technical stop work and magnet changes have been completed and the machine has been handed over to the Operations Group for the usual set of hardware tests and preparations for beam operation. ...

Table - Impacts of the Proposed Transport Rule on Counties with Monitors Projected to have Ozone and/or Fine Particle Air Quality Problems

Science.gov (United States)

This table shows the impacts of the proposed Transport Rule on Counties with Monitors Projected to have Ozone and/or Fine Particle Air Quality Problems, both with and without the Cross-State Air Pollution Rule.

QUALITY IMPROVEMENT USING STATISTICAL PROCESS CONTROL TOOLS IN GLASS BOTTLES MANUFACTURING COMPANY

Directory of Open Access Journals (Sweden)

Yonatan Mengesha Awaj

2013-03-01

Full Text Available In order to survive in a competitive market, improving quality and productivity of product or process is a must for any company. This study is about to apply the statistical process control (SPC tools in the production processing line and on final product in order to reduce defects by identifying where the highest waste is occur at and to give suggestion for improvement. The approach used in this study is direct observation, thorough examination of production process lines, brain storming session, fishbone diagram, and information has been collected from potential customers and company's workers through interview and questionnaire, Pareto chart/analysis and control chart (p-chart was constructed. It has been found that the company has many problems; specifically there is high rejection or waste in the production processing line. The highest waste occurs in melting process line which causes loss due to trickle and in the forming process line which causes loss due to defective product rejection. The vital few problems were identified, it was found that the blisters, double seam, stone, pressure failure and overweight are the vital few problems. The principal aim of the study is to create awareness to quality team how to use SPC tools in the problem analysis, especially to train quality team on how to held an effective brainstorming session, and exploit these data in cause-and-effect diagram construction, Pareto analysis and control chart construction. The major causes of non-conformities and root causes of the quality problems were specified, and possible remedies were proposed. Although the company has many constraints to implement all suggestion for improvement within short period of time, the company recognized that the suggestion will provide significant productivity improvement in the long run.

Applications of a saving method with max-min ant system to a vehicle routing problem with time windows and speed limits

Directory of Open Access Journals (Sweden)

Suphan Sodsoon

2014-06-01

Full Text Available This study aims to solve a Vehicle Routing Problem with Time Windows and Speed Limits (VRPTWSL, which has received considerable attention in recent years. The vehicle routing problem with time windows is an extension of the well-known Vehicle Routing Problem (VRP and involves a fleet of vehicles set of from a depot to serve a number of customers at different geographic locations with various demands within specific time and speed limits before returning to the depot eventually. To solve the problem, an efficient Saving Method-Max Min Ant System (Saving-MMAS with Local Search algorithm is applied. Using minimization of the total transportation costs as the objective of the extension VRPTWSL, a mathematic model is constructed. Finally, the Saving-MMAS algorithms indicated the good quality of the method in this problem.

The Use of Tracer Gas Measurements in Detection and Solution of Indoor Air Quality Problems in a Danish Town Hall

DEFF Research Database (Denmark)

Brohus, Henrik; Hyldgård, Carl-Erik

A Danish town hall with substantial complaints of poor indoor air quality is examined. This paper describes ·the use of traGer gas measurements which form an important part in the detection and solution of the problems. Investigations are carried out both in the field and in the laboratory using...

The new Space Shuttle Transportation System (STS) - Problem, performance, supportability, and programmatic trending program

Science.gov (United States)

Crawford, J. L.; Rodney, G. A.

1989-01-01

This paper describes the NASA Space Shuttle Trend Analysis program. The four main areas of the program - problem/reliability, performance, supportability, and programmatic trending - are defined, along with motivation for these areas, the statistical methods used, and illustrative Space Shuttle applications. Also described is the NASA Safety, Reliability, Maintainability and Quality Assurance (SRM&QA) Management Information Center, used to focus management attention on key near-term launch concerns and long-range mission trend issues. Finally, the computer data bases used to support the program and future program enhancements are discussed.

Imaging Food Quality

DEFF Research Database (Denmark)

Møller, Flemming

Imaging and spectroscopy have long been established methods for food quality control both in the laboratories and online. An ever increasing number of analytical techniques are being developed into imaging methods and existing imaging methods to contain spectral information. Images and especially...... spectral images contain large amounts of data which should be analysed appropriately by techniques combining structure and spectral information. This dissertation deals with how different types of food quality can be measured by imaging techniques, analysed with appropriate image analysis techniques...... and finally use the image data to predict or visualise food quality. A range of different food quality parameters was addressed, i.e. water distribution in bread throughout storage, time series analysis of chocolate milk stability, yoghurt glossiness, graininess and dullness and finally structure and meat...

Quality education as quality system support

International Nuclear Information System (INIS)

Crnoshia, L.; Gavriloska, M.; Denkovska, J.; Dimitrovski, A.

1999-01-01

Within the last ten years we are witnesses of the political and economical system transformation, that imposed the need for changing the way of thinking and work planning. The quality has become the imperative of working and a precondition for survival in the market. Solving the quality problems seeks planned and systematic approach that supposed appropriate personnel with adequate knowledge in the field of quality management and implementation of the quality system. Having in mind the need for documented quality system and quality management OKTA, has already started with personnel educational process for quality as a precondition for successful establishment of quality system. In this paper we present quality education approach and manner of its realization in OKTA Crude Oil Refinery - Skopje, Macedonia. (Original)

The role of context in preschool learning: a multilevel examination of the contribution of context-specific problem behaviors and classroom process quality to low-income children's approaches to learning.

Science.gov (United States)

Domínguez, Ximena; Vitiello, Virginia E; Fuccillo, Janna M; Greenfield, Daryl B; Bulotsky-Shearer, Rebecca J

2011-04-01

Research suggests that promoting adaptive approaches to learning early in childhood may help close the gap between advantaged and disadvantaged children. Recent research has identified specific child-level and classroom-level variables that are significantly associated with preschoolers' approaches to learning. However, further research is needed to understand the interactive effects of these variables and determine whether classroom-level variables buffer the detrimental effects of child-level risk variables. Using a largely urban and minority sample (N=275) of preschool children, the present study examined the additive and interactive effects of children's context-specific problem behaviors and classroom process quality dimensions on children's approaches to learning. Teachers rated children's problem behavior and approaches to learning and independent assessors conducted classroom observations to assess process quality. Problem behaviors in structured learning situations and in peer and teacher interactions were found to negatively predict variance in approaches to learning. Classroom process quality domains did not independently predict variance in approaches to learning. Nonetheless, classroom process quality played an important role in these associations; high emotional support buffered the detrimental effects of problem behavior, whereas high instructional support exacerbated them. The findings of this study have important implications for classroom practices aimed at helping children who exhibit problem behaviors. Copyright © 2010 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Quality of semantic standards

NARCIS (Netherlands)

Folmer, Erwin Johan Albert

2012-01-01

Little scientific literature addresses the issue of quality of semantic standards, albeit a problem with high economic and social impact. Our problem survey, including 34 semantic Standard Setting Organizations (SSOs), gives evidence that quality of standards can be improved, but for improvement a

Fifth technical meeting on quality

International Nuclear Information System (INIS)

Girard, A.

1998-01-01

This article reports on the 5th Technical Meeting on Quality which was held in San Diego on 20-22 October 1997 and which was attended by representatives of the Home and Joint Central Team and of manufacturers currently involved in the Large R and D projects. The meeting made progress towards the finalization of the ITER Quality Manual document for inclusion in the Final Design Report and the definition of the quality necessary for ITER procurement and construction

Quality Control in Production Processes

Directory of Open Access Journals (Sweden)

Prístavka Miroslav

2016-09-01

Full Text Available The tools for quality management are used for quality improvement throughout the whole Europe and developed countries. Simple statistics are considered one of the most basic methods. The goal was to apply the simple statistical methods to practice and to solve problems by using them. Selected methods are used for processing the list of internal discrepancies within the organization, and for identification of the root cause of the problem and its appropriate solution. Seven basic quality tools are simple graphical tools, but very effective in solving problems related to quality. They are called essential because they are suitable for people with at least basic knowledge in statistics; therefore, they can be used to solve the vast majority of problems.

The ALICE data quality monitoring system

International Nuclear Information System (INIS)

Haller, B von; Telesca, A; Chapeland, S; Carena, F; Carena, W; Barroso, V Chibante; Costa, F; Denes, E; Divià, R; Fuchs, U; Simonetti, G; Soós, C; Vyvre, P Vande

2011-01-01

ALICE (A Large Ion Collider Experiment) is the heavy-ion detector designed to study the physics of strongly interacting matter and the quark-gluon plasma at the CERN Large Hadron Collider (LHC). The online Data Quality Monitoring (DQM) is a key element of the Data Acquisition's software chain. It provide shifters with precise and complete information to quickly identify and overcome problems, and as a consequence to ensure acquisition of high quality data. DQM typically involves the online gathering, the analysis by user-defined algorithms and the visualization of monitored data. This paper describes the final design of ALICE'S DQM framework called AMORE (Automatic MOnitoRing Environment), as well as its latest and coming features like the integration with the offline analysis and reconstruction framework, a better use of multi-core processors by a parallelization effort, and its interface with the eLogBook. The concurrent collection and analysis of data in an online environment requires the framework to be highly efficient, robust and scalable. We will describe what has been implemented to achieve these goals and the procedures we follow to ensure appropriate robustness and performance. We finally review the wide range of usages people make of this framework, from the basic monitoring of a single sub-detector to the most complex ones within the High Level Trigger farm or using the Prompt Reconstruction and we describe the various ways of accessing the monitoring results. We conclude with our experience, before and after the LHC startup, when monitoring the data quality in a challenging environment.

The ALICE data quality monitoring system

Science.gov (United States)

von Haller, B.; Telesca, A.; Chapeland, S.; Carena, F.; Carena, W.; Chibante Barroso, V.; Costa, F.; Denes, E.; Divià, R.; Fuchs, U.; Simonetti, G.; Soós, C.; Vande Vyvre, P.; ALICE Collaboration

2011-12-01

ALICE (A Large Ion Collider Experiment) is the heavy-ion detector designed to study the physics of strongly interacting matter and the quark-gluon plasma at the CERN Large Hadron Collider (LHC). The online Data Quality Monitoring (DQM) is a key element of the Data Acquisition's software chain. It provide shifters with precise and complete information to quickly identify and overcome problems, and as a consequence to ensure acquisition of high quality data. DQM typically involves the online gathering, the analysis by user-defined algorithms and the visualization of monitored data. This paper describes the final design of ALICE'S DQM framework called AMORE (Automatic MOnitoRing Environment), as well as its latest and coming features like the integration with the offline analysis and reconstruction framework, a better use of multi-core processors by a parallelization effort, and its interface with the eLogBook. The concurrent collection and analysis of data in an online environment requires the framework to be highly efficient, robust and scalable. We will describe what has been implemented to achieve these goals and the procedures we follow to ensure appropriate robustness and performance. We finally review the wide range of usages people make of this framework, from the basic monitoring of a single sub-detector to the most complex ones within the High Level Trigger farm or using the Prompt Reconstruction and we describe the various ways of accessing the monitoring results. We conclude with our experience, before and after the LHC startup, when monitoring the data quality in a challenging environment.

Evaluation of the information quality in a company of metal-mechanical industry

Directory of Open Access Journals (Sweden)

Guilherme Augusto Spiegel Gualazzi

2012-11-01

Full Text Available This paper presents the application of an instrument for assessing the quality of information based on attributes such as accuracy, reliability, performance, among others. This instrument was applied in order to evaluate and identify ineffective information in a specific scenario of an engineering company in the metal-mechanic sector from the point of view of users of technical information. The case study aimed to demonstrate the applicability and functionality of the assessment instrument, the interest of people in evaluating their information and, finally, evaluate the scope of their results. The result of this evaluation allowed the company researched a plan of action to correct problems in its processes and identified inaccuracies in the information, indicating that the problem was solved by the method of problem solving.

Developing cross-sectoral quality assurance for cataract surgery in the statutory quality assurance program of the German health care system: Experiences and lessons learned.

Science.gov (United States)

Bramesfeld, Anke; Pauletzki, Jürgen; Behrenz, Lars; Szecsenyi, Joachim; Willms, Gerald; Broge, Björn

2015-08-01

Since 2001, statutory external quality assurance (QA) for hospital care has been in place in the German health system. In 2009, the decision was taken to expand it to cross-sectoral procedures. This novel and unprecedented form of national QA aims at (1) making the quality procedures comparable that are provided both in inpatient and outpatient care, (2) following-up outcomes of hospital care after patients' discharge and (3) measuring the quality of complex treatment chains across interfaces. As a pioneer procedure a QA procedure in cataract surgery QA was developed. Using this as an example, challenges of cross-sectoral QA are highlighted. These challenges relate, in particular, to three technical problems: triggering cases for documentation, following-up patients' after hospital discharge, and the burden of documentation in outpatient care. These problems resulted finally in the haltering of the development of the QA procedure. However, the experiences gained with this first development of cross-sectoral QA inspired the reorientation and further development of the field in Germany. Future cross-sectoral QA will rigorously aim at keeping burden of documentation small. It will draw data for QA mainly at three sources: routine data, patient surveys and peer reviews using indicators. Policy implications of this reorientation are discussed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Total Quality Management (TQM): Group Dynamics Workshop

Science.gov (United States)

1990-05-15

take for these changes to penetrate most OSD agencies. - The unique organizational culture, structure, and functioning of OSD (i.e., a gigantic size...Performing (group problem solving; Performing diagnosing and solving quality problems and sele2cting and implementing solutions). Total Quality Management...Stage, the quality improvement group diagnoses the quality problem/opportunity, gathers the right kind of quantitative data, and formulates, selects, and

Power theories for improved power quality

CERN Document Server

Pasko, Marian

2012-01-01

Power quality describes a set of parameters of electric power and the load’s ability to function properly under specific conditions. It is estimated that problems relating to power quality costs the European industry hundreds of billions of Euros annually. In contrast, financing for the prevention of these problems amount to fragments of these costs. Power Theories for Improved Power Quality addresses this imbalance by presenting and assessing a range of methods and problems related to improving the quality of electric power supply. Focusing particularly on active compensators and the DSP based control algorithms, Power Theories for Improved Power Quality introduces the fundamental problems of electrical power. This introduction is followed by chapters which discuss: •‘Power theories’ including their historical development and application to practical problems, •operational principles of active compensator’s DSP control based algorithms using examples and results from laboratory research, and •t...

Quality assurance. 6. ed.

International Nuclear Information System (INIS)

Masing, W.

1979-01-01

Brief introduction to the quality sector. After some explanations of the terms of quality, feature, and defect, the article discusses the planning of quality and testing, industrial metrology, the test risk, quality assurance, quality enhancement, quality cost, and organisational problems. (RW) [de

Assessment of the effectiveness of European air quality policies and measures. Final report on Task 3.3. Survey to access successes and failures of the EU Air Quality Policies

International Nuclear Information System (INIS)

2004-01-01

The main objective of Task 3.3 of the title project was to survey the views of European policy makers and other stakeholders directly involved in air quality policy development and implementation on the successes and failures of the present European air quality policies. The survey also included several decisionmakers from the USA, Japan and Switzerland to learn about these countries' experiences with specific air quality policies. A list of approximately 90 people to be surveyed during the project was developed. The list included representatives from the European Commission, the European Parliament, national-level representatives from the Member States, including those designated by the CAFE Steering Group, along with representatives of local authorities, NGOs, industry and academia. The survey was conducted through a questionnaire and follow-up interviews. The questionnaire consists of four major parts. Part 1 includes questions about the impact of EU legislation on air quality. Part 2 is designed to learn about stakeholder opinions on the adequacy of Community-level measures with respect to air quality protection. Part 3 asks for opinions about various measures used in Community-level legislation on air quality as well as ideas for new or modified measures that could be effective in achieving better air quality in the EU. Part 4 includes questions about stakeholder involvement and transparency and was designed to assist with the implementation of Task 3.4 (on public participation and transparency) of the project. The analysis of responses for this part of the questionnaire is presented in the parallel Report for Task 3.4. The final version of the questionnaire used to interview European stakeholders is attached as Appendix II. For the decision-makers from the USA, Switzerland, and Japan a separate questionnaire was developed, and is attached as Appendix III. In all, the team received 49 responses from the 90 enquiries.

Quality assurance plan for Final Waste Forms project in support of the development, demonstration, testing and evaluation efforts associated with the Oak Ridge reservation`s LDR/FFCA compliance

Energy Technology Data Exchange (ETDEWEB)

Gilliam, T.M.; Mattus, C.H.

1994-07-01

This quality assurance project plan specifies the data quality objectives for Phase I of the Final Waste Forms Project and defines specific measurements and processes required to achieve those objectives. Although the project is funded by the U.S. Department of Energy (DOE), the ultimate recipient of the results is the U.S. Environmental Protection Agency (EPA). Consequently, relevant quality assurance requirements from both organizations must be met. DOE emphasizes administrative structure to ensure quality; EPA`s primary focus is the reproducibility of the generated data. The ten criteria of DOE Order 5700.6C are addressed in sections of this report, while the format used is that prescribed by EPA for quality assurance project plans.

Introduction to quality assurance

International Nuclear Information System (INIS)

Kaden, W.

1980-01-01

In today's interpretation 'quality assurance' means 'good management'. Quality assurance has to cover all phases of a work, but all quality assurance measures must be adapted to the relevance and complexity of the actual task. Examples are given for the preparation of quality classes, the organization of quality assurance during design and manufacturing and for auditing. Finally, efficiency and limits of quality assurance systems are described. (orig.)

The Relationship between Sleep Problems, Neurobiological Alterations, Core Symptoms of Autism Spectrum Disorder, and Psychiatric Comorbidities

Directory of Open Access Journals (Sweden)

Luigi Mazzone

2018-05-01

Full Text Available Children with Autism Spectrum Disorder (ASD are at an increased risk for sleep disturbances, and studies indicate that between 50 and 80% of children with ASD experience sleep problems. These problems increase parental stress and adversely affect family quality of life. Studies have also suggested that sleep disturbances may increase behavioral problems in this clinical population. Although understanding the causes of sleep disorders in ASD is a clinical priority, the causal relationship between these two conditions remains unclear. Given the complex nature of ASD, the etiology of sleep problems in this clinical population is probably multi-factorial. In this overview, we discuss in detail three possible etiological explanations of sleep problems in ASD that can all contribute to the high rate of these symptoms in ASD. Specifically, we examine how neurobiological alterations, genetic mutations, and disrupted sleep architecture can cause sleep problems in individuals with ASD. We also discuss how sleep problems may be a direct result of core symptoms of ASD. Finally, a detailed examination of the relationship between sleep problems and associated clinical features and psychiatric comorbidities in individuals with ASD is described.

Automated processing of whole blood units: operational value and in vitro quality of final blood components.

Science.gov (United States)

Jurado, Marisa; Algora, Manuel; Garcia-Sanchez, Félix; Vico, Santiago; Rodriguez, Eva; Perez, Sonia; Barbolla, Luz

2012-01-01

The Community Transfusion Centre in Madrid currently processes whole blood using a conventional procedure (Compomat, Fresenius) followed by automated processing of buffy coats with the OrbiSac system (CaridianBCT). The Atreus 3C system (CaridianBCT) automates the production of red blood cells, plasma and an interim platelet unit from a whole blood unit. Interim platelet unit are pooled to produce a transfusable platelet unit. In this study the Atreus 3C system was evaluated and compared to the routine method with regards to product quality and operational value. Over a 5-week period 810 whole blood units were processed using the Atreus 3C system. The attributes of the automated process were compared to those of the routine method by assessing productivity, space, equipment and staffing requirements. The data obtained were evaluated in order to estimate the impact of implementing the Atreus 3C system in the routine setting of the blood centre. Yield and in vitro quality of the final blood components processed with the two systems were evaluated and compared. The Atreus 3C system enabled higher throughput while requiring less space and employee time by decreasing the amount of equipment and processing time per unit of whole blood processed. Whole blood units processed on the Atreus 3C system gave a higher platelet yield, a similar amount of red blood cells and a smaller volume of plasma. These results support the conclusion that the Atreus 3C system produces blood components meeting quality requirements while providing a high operational efficiency. Implementation of the Atreus 3C system could result in a large organisational improvement.

QUEST for Quality for Students: A Student Quality Concept. Volume 3

Science.gov (United States)

Galán Palomares, Fernando Miguel; Todorovski, Blazhe; Kažoka, Asnate; Saarela, Henni

2013-01-01

This is the final publication of the QUEST for Quality for Students (QUEST) project, run by the European Students' Union. The QUEST project has managed to analyse students' views on the quality of higher education to identify areas in which students can become increasingly involved in quality assurance and enhancement processes. This publication…

Combining FMEA with DEMATEL models to solve production process problems.

Directory of Open Access Journals (Sweden)

Sang-Bing Tsai

Full Text Available Failure mode and effects analysis (FMEA is an analysis tool for identifying and preventing flaws or defects in products during the design and process planning stage, preventing the repeated occurrence of problems, reducing the effects of these problems, enhancing product quality and reliability, saving costs, and improving competitiveness. However, FMEA can only analyze one influence factor according to its priority, rendering this method ineffective for systems containing multiple FMs whose effects are simultaneous or interact with one another. Accordingly, when FMEA fails to identify the influence factors and the factors being influenced, the most crucial problems may be placed in lower priority or remain unresolved. Decision-Making Trial and Evaluation Laboratory (DEMATEL facilitates the determination of cause and effect factors; by identifying the causal factors that should be prioritized, prompt and effective solutions to core problems can be derived, thereby enhancing performance. Using the photovoltaic cell manufacturing industry in China as the research target, the present study combined FMEA with DEMATEL to amend the flaws of FMEA and enhance its effectiveness. First, FMEA was used to identify items requiring improvement. Then, DEMATEL was employed to examine the interactive effects and causal relationships of these items. Finally, the solutions to the problems were prioritized. The proposed method effectively combined the advantages of FMEA and DEMATEL to facilitate the identification of core problems and prioritization of solutions in the Chinese photovoltaic cell industry.

Combining FMEA with DEMATEL models to solve production process problems

Science.gov (United States)

Tsai, Sang-Bing; Zhou, Jie; Gao, Yang; Wang, Jiangtao; Li, Guodong; Zheng, Yuxiang; Ren, Peng; Xu, Wei

2017-01-01

Failure mode and effects analysis (FMEA) is an analysis tool for identifying and preventing flaws or defects in products during the design and process planning stage, preventing the repeated occurrence of problems, reducing the effects of these problems, enhancing product quality and reliability, saving costs, and improving competitiveness. However, FMEA can only analyze one influence factor according to its priority, rendering this method ineffective for systems containing multiple FMs whose effects are simultaneous or interact with one another. Accordingly, when FMEA fails to identify the influence factors and the factors being influenced, the most crucial problems may be placed in lower priority or remain unresolved. Decision-Making Trial and Evaluation Laboratory (DEMATEL) facilitates the determination of cause and effect factors; by identifying the causal factors that should be prioritized, prompt and effective solutions to core problems can be derived, thereby enhancing performance. Using the photovoltaic cell manufacturing industry in China as the research target, the present study combined FMEA with DEMATEL to amend the flaws of FMEA and enhance its effectiveness. First, FMEA was used to identify items requiring improvement. Then, DEMATEL was employed to examine the interactive effects and causal relationships of these items. Finally, the solutions to the problems were prioritized. The proposed method effectively combined the advantages of FMEA and DEMATEL to facilitate the identification of core problems and prioritization of solutions in the Chinese photovoltaic cell industry. PMID:28837663

Guidelines for Preparing Final Technical Reports

International Development Research Centre (IDRC) Digital Library (Canada)

fdieudonne

Prior to submitting the Final Technical Report, any outstanding issues related to dissemination in accordance with ... The report should be an opportunity to reflect on the management of the project from various perspectives: .... of poor quality.

Optimum profit model considering production, quality and sale problem

Science.gov (United States)

Chen, Chung-Ho; Lu, Chih-Lun

2011-12-01

Chen and Liu ['Procurement Strategies in the Presence of the Spot Market-an Analytical Framework', Production Planning and Control, 18, 297-309] presented the optimum profit model between the producers and the purchasers for the supply chain system with a pure procurement policy. However, their model with a simple manufacturing cost did not consider the used cost of the customer. In this study, the modified Chen and Liu's model will be addressed for determining the optimum product and process parameters. The authors propose a modified Chen and Liu's model under the two-stage screening procedure. The surrogate variable having a high correlation with the measurable quality characteristic will be directly measured in the first stage. The measurable quality characteristic will be directly measured in the second stage when the product decision cannot be determined in the first stage. The used cost of the customer will be measured by adopting Taguchi's quadratic quality loss function. The optimum purchaser's order quantity, the producer's product price and the process quality level will be jointly determined by maximising the expected profit between them.

LDRD final report for improving human effectiveness for extreme-scale problem solving : assessing the effectiveness of electronic brainstorming in an industrial setting.

Energy Technology Data Exchange (ETDEWEB)

Dornburg, Courtney C.; Stevens, Susan Marie; Davidson, George S.; Hendrickson, Stacey M. Langfitt

2008-09-01

An experiment was conducted comparing the effectiveness of individual versus group electronic brainstorming in order to address difficult, real world challenges. While industrial reliance on electronic communications has become ubiquitous, empirical and theoretical understanding of the bounds of its effectiveness have been limited. Previous research using short-term, laboratory experiments have engaged small groups of students in answering questions irrelevant to an industrial setting. The present experiment extends current findings beyond the laboratory to larger groups of real-world employees addressing organization-relevant challenges over the course of four days. Employees and contractors at a national security laboratory participated, either in a group setting or individually, in an electronic brainstorm to pose solutions to a 'wickedly' difficult problem. The data demonstrate that (for this design) individuals perform at least as well as groups in producing quantity of electronic ideas, regardless of brainstorming duration. However, when judged with respect to quality along three dimensions (originality, feasibility, and effectiveness), the individuals significantly (p<0.05) out-performed the group working together. When idea quality is used as the benchmark of success, these data indicate that work-relevant challenges are better solved by aggregating electronic individual responses, rather than electronically convening a group. This research suggests that industrial reliance upon electronic problem solving groups should be tempered, and large nominal groups might be the more appropriate vehicle for solving wicked corporate issues.

The structure of algebraic problem in high schools

OpenAIRE

Chio, José Angel; Álvarez, Aida; Estrada, Pablo

2010-01-01

The paper is aimed at discussing the importance of pupil’s knowledge of algebraic problem structure. The research started by diagnosing pupil’s actual command of algebraic problem structure. Finally suggestions to teachers of mathematics for facing difficulties in solving problems are given.

THE APPLICATION OF QRQC METHOD TO SOLVE PROBLEMS AND TO IMPROVE THE PRODUCTION FLUX (1

Directory of Open Access Journals (Sweden)

Ancuţa BĂLTEANU

2015-05-01

Full Text Available ORQC is a quality management system which aims customer satisfaction through immediate action. The subject proposed will be developed over two parts. The first written work – respectively this - will presented initial situation within a production flow that is sensed in the appearance of defects and nonconformities in obtain the final products. In this second paper we will show the use of this method in a situation that requires elimination of a technological problem appeared in the production flux and in relieving its positive consequence.

Combination of graph heuristics in producing initial solution of curriculum based course timetabling problem

Science.gov (United States)

Wahid, Juliana; Hussin, Naimah Mohd

2016-08-01

The construction of population of initial solution is a crucial task in population-based metaheuristic approach for solving curriculum-based university course timetabling problem because it can affect the convergence speed and also the quality of the final solution. This paper presents an exploration on combination of graph heuristics in construction approach in curriculum based course timetabling problem to produce a population of initial solutions. The graph heuristics were set as single and combination of two heuristics. In addition, several ways of assigning courses into room and timeslot are implemented. All settings of heuristics are then tested on the same curriculum based course timetabling problem instances and are compared with each other in terms of number of population produced. The result shows that combination of saturation degree followed by largest degree heuristic produce the highest number of population of initial solutions. The results from this study can be used in the improvement phase of algorithm that uses population of initial solutions.

Supplier selection problem: A state-of-the-art review

Directory of Open Access Journals (Sweden)

Nilesh R. Ware

2012-08-01

Full Text Available In the global competitiveness and growing market environment, “Actual competition is not between firms against firm, than supplier against supplier”. Globally in the fastest market development world gets closer and closer. Consumers prefer fast delivery, economical product, excellent service and high quality product with desired service level. For successful management of this supply chain, supplier considered as the base source for all processes. Therefore, an efficient supplier selection and evaluation process needs to be incorporate. The main purpose of this paper is to provide an extensive state-of-the-art literature review and critique of the studies related to various aspects of supplier selection problem over the past two decades. Research papers appearing in the reputed and leading international journals from 1991 to 2011 are gathered and analyzed. Primary focus is given on more than 200 published and unpublished works. It has been referred extensively to carry out state-of-the-art review for supplier selection problem. Finally, paper provides future perspective based on current research trends available in the published literature.

Solving the flexible job shop problem by hybrid metaheuristics-based multiagent model

Science.gov (United States)

Nouri, Houssem Eddine; Belkahla Driss, Olfa; Ghédira, Khaled

2018-03-01

The flexible job shop scheduling problem (FJSP) is a generalization of the classical job shop scheduling problem that allows to process operations on one machine out of a set of alternative machines. The FJSP is an NP-hard problem consisting of two sub-problems, which are the assignment and the scheduling problems. In this paper, we propose how to solve the FJSP by hybrid metaheuristics-based clustered holonic multiagent model. First, a neighborhood-based genetic algorithm (NGA) is applied by a scheduler agent for a global exploration of the search space. Second, a local search technique is used by a set of cluster agents to guide the research in promising regions of the search space and to improve the quality of the NGA final population. The efficiency of our approach is explained by the flexible selection of the promising parts of the search space by the clustering operator after the genetic algorithm process, and by applying the intensification technique of the tabu search allowing to restart the search from a set of elite solutions to attain new dominant scheduling solutions. Computational results are presented using four sets of well-known benchmark literature instances. New upper bounds are found, showing the effectiveness of the presented approach.

Implementing Mixed Method of Peer Teaching and Problem Solving on Undergraduate Students

Directory of Open Access Journals (Sweden)

A. Firli

2017-02-01

Full Text Available This study examined the application of problem solving method combined with student centered learning (peer teaching method as a mixed method to improve student’s passing level of financial management course. The object of this study was the 84 students of financial management course separated within two classes during the odd semester period 2014/2015, July until December 2015 with fourteen meeting courses. Data used to measure the results of the application is mid and final exam scores of both classes. Researcher used observation, interview and documentation as data collect technique also triangulation technique as data validity check. This study used problem solving method combined with student centered learning (peer teaching method as a mixed method which included into the Classroom Action Research. The final results show the increase in class A passing level is 17%. Class B passing level increased 3%. From the research we also know that in practical use of mixed method learning, leader’s quality and conducive learning environment are influencing factors in improving student’s learning performance. While the result confirms that mixed method improving learning performance, this study also founds additional factors that might be considerably affecting the results of learning performance when implementing the mixed method.

Feed quality in swine diet

Directory of Open Access Journals (Sweden)

Živković Branislav

2002-01-01

Full Text Available The paper will demonstrate the quality of some feed used in swine diet. The emphasis will be on feed whose incorporation into mixes could result in unfavorable effects on production, health and economic production of swine. Data will be presented on maize and its possible negative effects, having in mind toxins. Soybean meal, or genetically modified soybean meal, will also be observed. The next feed which will be discussed will be soybean whey obtained by different procedures and the potential dangers of its use in swine diet rations. Sunflower meal, feed of animal origin, with emphasis on fish flour and meat-bone flour will also be covered in the work. A feed which has been attracting particular attention lately is yeast imported from Italy. Its quality characteristics will be discussed, the so-called non-protein nitrogen. Analyses of mineral feed will include sources of phosphorus, phosphates (monocalciumphosphate, dicalcium phosphate phytases and resolving the problem of phosphorus in swine rations. Finally, an inevitable segment are synthetic amino acids, especially lysine and its role in swine diet.

Obstacle mean-field game problem

KAUST Repository

Gomes, Diogo A.; Patrizi, Stefania

2015-01-01

In this paper, we introduce and study a first-order mean-field game obstacle problem. We examine the case of local dependence on the measure under assumptions that include both the logarithmic case and power-like nonlinearities. Since the obstacle operator is not differentiable, the equations for first-order mean field game problems have to be discussed carefully. Hence, we begin by considering a penalized problem. We prove this problem admits a unique solution satisfying uniform bounds. These bounds serve to pass to the limit in the penalized problem and to characterize the limiting equations. Finally, we prove uniqueness of solutions. © European Mathematical Society 2015.

Medicare Program: Hospital Outpatient Prospective Payment and Ambulatory Surgical Center Payment Systems and Quality Reporting Programs; Short Inpatient Hospital Stays; Transition for Certain Medicare-Dependent, Small Rural Hospitals Under the Hospital Inpatient Prospective Payment System; Provider Administrative Appeals and Judicial Review. Final rule with comment period; final rule.

Science.gov (United States)

2015-11-13

This final rule with comment period revises the Medicare hospital outpatient prospective payment system (OPPS) and the Medicare ambulatory surgical center (ASC) payment system for CY 2016 to implement applicable statutory requirements and changes arising from our continuing experience with these systems. In this final rule with comment period, we describe the changes to the amounts and factors used to determine the payment rates for Medicare services paid under the OPPS and those paid under the ASC payment system. In addition, this final rule with comment period updates and refines the requirements for the Hospital Outpatient Quality Reporting (OQR) Program and the ASC Quality Reporting (ASCQR) Program. Further, this document includes certain finalized policies relating to the hospital inpatient prospective payment system: Changes to the 2-midnight rule under the short inpatient hospital stay policy; and a payment transition for hospitals that lost their status as a Medicare-dependent, small rural hospital (MDH) because they are no longer in a rural area due to the implementation of the new Office of Management and Budget delineations in FY 2015 and have not reclassified from urban to rural before January 1, 2016. In addition, this document contains a final rule that finalizes certain 2015 proposals, and addresses public comments received, relating to the changes in the Medicare regulations governing provider administrative appeals and judicial review relating to appropriate claims in provider cost reports.

Computational methods for the nuclear and neutron matter problems: Final report

International Nuclear Information System (INIS)

Kalos, M.H.; Chen, J.M.C.

1988-01-01

This paper discusses the following topics: variational Monte Carlo study of oxygen 16; microscopic calculations of alpha-neutron scattering; exact Monte Carlo treatment of the fermion problem; and random field method

Study on the quality of FRP fishing vessel based on improved Fishbone Chart

Science.gov (United States)

Sui, J. H.; Yu, Y. F.; Du, Q. F.; Jiang, D. W.

2018-01-01

The construction quality of FRP fishing vessels influences their production, use and industry development. In order to explore the factors that affect the construction quality of FRP fishing vessels, key factors affecting the construction quality of FRP fishing vessels are determined based on the quality problems of FRP fishing vessels constructed. The improved Fishbone Chart is used to analyze the eight factors of “human, machine, material, process, environment, inspection, design and information”. Taking the factors that affect the construction quality of FRP fishing vessels as the central target, the eight influencing factors were condensed into five aspects and a composite Fishbone Chart is drawn. The Fishbone Chart is used as the basic model, the influencing factors are sorted, screened and discriminated, and the system model convenient for construction site management and control is established. Finally, the causes of poor construction of FRP fishing vessels are analyzed and discussed, and relevant suggestions are put forward.

Low physical activity and high screen time can increase the risks of mental health problems and poor sleep quality among Chinese college students.

Directory of Open Access Journals (Sweden)

Xiaoyan Wu

Full Text Available To test the independent and interactive associations of physical activity (PA and screen time (ST with self-reported mental health and sleep quality among Chinese college students.Data were collected in October, 2013. The gender, age, residential background, body mass index (BMI, perceived family economy and perceived study burden were obtained from a total of 4747 college students (41.6% males and 58.4% females. The outcomes were self-reported PA status, ST, anxiety, depression, psychopathological symptoms and sleep quality. Analyses were conducted with logistic regression models.Overall, 16.3%, 15.9% and 17.3% of the students had psychological problems, such as anxiety, depression and psychopathological symptoms, respectively. The prevalence of poor sleep quality was 9.8%. High ST was significantly positively associated with anxiety (OR=1.38, 95%CI: 1.15-1.65, depression (OR=1.76, 95%CI: 1.47-2.09, psychopathological symptoms (OR=1.69, 95%CI: 1.43-2.01 and poor sleep quality (OR=1.32, 95%CI: 1.06-1.65. High PA was insignificantly negatively associated with anxiety, depression, psychopathological symptoms and poor sleep. Low PA and high ST were independently and interactively associated with increased risks of mental health problems and poor sleep quality (p<0.05 for all.Interventions are needed to reduce ST and increase PA in the lifestyles of young people. Future research should develop and measure the impacts of interventions and their potential consequences on sleep, health, and well being.

XERG-mammography system: a solution to the dose-quality problem

Energy Technology Data Exchange (ETDEWEB)

Friedrich, M

1981-05-01

The XERG (Xonics-Electron-Radio-Graphy) system is the first ionographic system (High-Pressure-Gas-Iono-graphy) suitable for clinical application which became available for testing. The basic principle, the function and imaging qualities of the XERG system are described and first clinical experiences reported. The XERG mammogram is a transparent X-ray negative image, the image quality of which is characterized by good general image contrast, a moderate edge-effect and a high quantum-noise level but giving an extremely low dose rate (4.5% compared to screenless mammography film). Although the XERG quality is not satisfactory in contact technique, it yields results which are equal in quality, when using a 1.5-fold magnification technique, to the results obtained with screenless film mammography at one-tenth of the dose, and is superior to any commercially available film-screen system. Hence, in our opinion, the XERG mammography system is a step forward towards high-quality low-dose mammography.

A systematic review of the international published literature relating to quality of institutional care for people with longer term mental health problems

NARCIS (Netherlands)

Taylor, T.L.; Killaspy, H.; Wright, C.; Turton, P.; White, S.; Kallert, T.W.; Schuster, M.; Cervilla, J.A.; Brangier, P.; Raboch, J.; Kalisova, L.; Onchev, G.; Dimitrov, H.; Mezzina, R.; Wolf, Kinou; Wiersma, D.; Visser, E.; Kiejna, A.; Piotrowski, P.; Ploumpidis, D.; Gonidakis, F.; Caldas-de-Almeida, J.; Cardoso, G.; King, M.B.

2009-01-01

Background: A proportion of people with mental health problems require longer term care in a psychiatric or social care institution. However, there are no internationally agreed quality standards for institutional care and no method to assess common care standards across countries. We aimed to

Solving a Closed-Loop Location-Inventory-Routing Problem with Mixed Quality Defects Returns in E-Commerce by Hybrid Ant Colony Optimization Algorithm

Directory of Open Access Journals (Sweden)

Shuai Deng

2016-01-01

Full Text Available This paper presents a closed-loop location-inventory-routing problem model considering both quality defect returns and nondefect returns in e-commerce supply chain system. The objective is to minimize the total cost produced in both forward and reverse logistics networks. We propose a combined optimization algorithm named hybrid ant colony optimization algorithm (HACO to address this model that is an NP-hard problem. Our experimental results show that the proposed HACO is considerably efficient and effective in solving this model.

Permutation flow-shop scheduling problem to optimize a quadratic objective function

Science.gov (United States)

Ren, Tao; Zhao, Peng; Zhang, Da; Liu, Bingqian; Yuan, Huawei; Bai, Danyu

2017-09-01

A flow-shop scheduling model enables appropriate sequencing for each job and for processing on a set of machines in compliance with identical processing orders. The objective is to achieve a feasible schedule for optimizing a given criterion. Permutation is a special setting of the model in which the processing order of the jobs on the machines is identical for each subsequent step of processing. This article addresses the permutation flow-shop scheduling problem to minimize the criterion of total weighted quadratic completion time. With a probability hypothesis, the asymptotic optimality of the weighted shortest processing time schedule under a consistency condition (WSPT-CC) is proven for sufficiently large-scale problems. However, the worst case performance ratio of the WSPT-CC schedule is the square of the number of machines in certain situations. A discrete differential evolution algorithm, where a new crossover method with multiple-point insertion is used to improve the final outcome, is presented to obtain high-quality solutions for moderate-scale problems. A sequence-independent lower bound is designed for pruning in a branch-and-bound algorithm for small-scale problems. A set of random experiments demonstrates the performance of the lower bound and the effectiveness of the proposed algorithms.

Internet addiction, sleep and health-related life quality among obese individuals: a comparison study of the growing problems in adolescent health.

Science.gov (United States)

Eliacik, Kayi; Bolat, Nurullah; Koçyiğit, Cemil; Kanik, Ali; Selkie, Ellen; Yilmaz, Huseyin; Catli, Gonul; Dundar, Nihal Olgac; Dundar, Bumin Nuri

2016-12-01

The rapid rise in the global prevalence of obesity suggests that environmental factors may be responsible. The increased use of technology is associated with increased rates of obesity due to declines in physical activity and significant sedentary life style. Internet addiction is also a growing health issue associated with diminished physical activity and poor sleep quality as well as various health problems. The purpose of this study was to determine associations between Internet addiction and adolescent obesity-related problems. In this case-control study, 71 adolescents with obesity were recruited from the outpatient clinic at Tepecik Teaching Hospital and Katip Celebi University Hospital, Department of Pediatric Endocrinology in Izmir, Turkey. The control group consisted of 64 non-obese adolescents that were matched with patients in the study group by age and gender. All subjects completed socio-demographic forms, an Internet addiction scale, the Pediatric Quality of Life Inventory, the Pittsburgh Sleep Quality Index, and the Epworth Sleepiness Scale. Adolescents with obesity were significantly more likely to have Internet addiction (p = 0.002), lower quality of life (p Internet addiction and less physical activity were associated with increased odds of obesity. The results indicated a significant association between Internet addiction and obesity. Health practitioners should take possible Internet addiction, online activities, and physical activities into consideration in follow-up of obese adolescents. In addition to pharmacologic therapies and dietary interventions, providing behavioral therapy targeting healthy Internet use may be promising to reduce the effects of obesity in adolescence.

Quality control in the design, fabrication and operation of the ITER magnets

International Nuclear Information System (INIS)

Mitchell, N.

2006-01-01

The ITER magnets are a complex system involving interfaces between many advanced technologies (superconductors, forging/welding/machining of massive structures, cryogenics, composites and moulding, high voltage electrical), yet at the same time form part of the ITER 'basic machine' which is required to operate at the design parameters, broadly failure free, for the design life of the tokamak. This imposes special quality control problems for the ITER project integration by the ITER International Team (IT) through the design, fabrication and operation. The magnets are not a test bed for new technology but in spite of this must use it, successfully. There is little previous experience of such a system but full functionality is required from the start, with limited opportunity for adjustment. And, finally, costs and schedule must be contained. The procurement strategy for the machine, with magnet components being supplied 'in kind', requires particular attention to the specifications, scheduling and quality control (QC). Special issues here are the testing requirements on magnet components, especially before final installation but also at critical intermediate stages. Unnecessary or ineffective quality control procedures cause delay and high costs, and divert attention from critical items. The main points of the magnet QC programme are summarised, including the use of codes and standards, qualification, manufacturing quality assurance, commissioning and in-service inspection

The structure of algebraic problem in high schools

Directory of Open Access Journals (Sweden)

Chio, José Angel

2010-01-01

Full Text Available The paper is aimed at discussing the importance of pupil’s knowledge of algebraic problem structure. The research started by diagnosing pupil’s actual command of algebraic problem structure. Finally suggestions to teachers of mathematics for facing difficulties in solving problems are given.

Boiling heat transfer and stability problems. Final report, November 1, 1976--March 31, 1979

International Nuclear Information System (INIS)

Hsieh, D.Y.

1979-03-01

Substantial progress has been made in two areas relating to the boiling heat transfer: the stability of a vapor-liquid system and the dynamics of bubbles. For the stability problem, a simplified formulation retaining the essential feature of the interfacial mass transfer has been established for the complex interfacial stability problem with mass and heat transfer. The simplified version was first applied to the linear Rayleigh-Taylor and Kelvin--Helmholtz stability problems. General agreement with results from previous more comprehensive treatment is obtained. Then the simplified formulation is utilized to study the nonlinear Rayleigh-Taylor stability problem. It is found that the combined effects of finite amplitude and the heat and mass transfer can stabilize the system in a regime which is linearly unstable. A single non-dimensional parameter can be found to characterize the stability criterion for certain configuration relevant to the problem of boiling heat transfer. For the problem of bubble dynamics, the investigation of the nonlinear coupling between the subharmonic spherical oscillation and the nonspherical oscillation has been carried out

Life quality index revisited

DEFF Research Database (Denmark)

Ditlevsen, Ove Dalager

2004-01-01

The derivation of the life quality index (LQI) is revisited for a revision. This revision takes into account the unpaid but necessary work time needed to stay alive in clean and healthy conditions to be fit for effective wealth producing work and to enjoyable free time. Dimension analysis...... at birth should not vary between countries. Finally the distributional assumptions are relaxed as compared to the assumptions made in an earlier work by the author. These assumptions concern the calculation of the life expectancy change due to the removal of an accident source. Moreover a simple public...... consistency problems with the standard power function expression of the LQI are pointed out. It is emphasized that the combination coefficient in the convex differential combination between the relative differential of the gross domestic product per capita and the relative differential of the expected life...

Quality guidance and quality formation

DEFF Research Database (Denmark)

Poulsen, Carsten Stig; Juhl, Hans Jørn; Kristensen, Kai

1996-01-01

set on Danish butter cookies. Five plausible models of the relation between expectation, experience and perceived product quality are estimated. Finally one model is selected on the basis of three criteria: chi-square, RMSEA and AIC: The results show a model where expectations are indirectly related...

Application of Six-Sigma for Data Quality Improvement in an Insurance Company

Directory of Open Access Journals (Sweden)

Mohit Panwar

2015-08-01

Full Text Available Abstract Billions of dollars annually is what poor data quality costs Insurance businesses according to the Data Warehousing Institute. Poor data is also the leading cause of many IT project failures. Many companies are designing their data management programs and quality initiatives to deal with this problem of erroneous and inconsistent data. This paper discusses these topics as well as those detailing how companies can improve their data quality using the quality improvement technique of applying Six-Sigma. The method of creating a new initiative for identifying measuring and controlling the data errors is discussed in this paper. Finally the paper ends with a conclusion and expected results and benefits of the technique. The insurance industry is data-dependent. Today carriers and intermediaries are engaged in improving data capture to help them to better manage their business manage their risk and know their customers. Business and regulatory drivers are pushing the industry to manage its data better.

Carbon chain length and the stimulus problem in oldfaction

NARCIS (Netherlands)

Boesveldt, S.; Olsson, M.; Lundstrom, J.N.

2010-01-01

Understanding how odour quality perception is encoded in its molecular properties arguably poses one of the most significant problems in olfaction. Determining the odour structure–quality relationships of structurally similar odorants could provide a key tool to this problem. We tentatively explored

SCIENTIFIC AND INNOVATIVE APPROACH TO PROBLEM PERTAINING TO EVALUATION AND MONITORING OF ENVIRONMENT QUALITY IN REPUBLIC OF BELARUS

Directory of Open Access Journals (Sweden)

I. V. Voytov

2009-01-01

Full Text Available The paper proposes a scientific and innovative approach to solution of an important problem in the field of rational nature management and ecology which presupposes realization of evaluation, analysis and monitoring of environment  quality  (EQ in Belarus.  This  approach is based on methods and  facilities  of  administrative-command  and  partially  automatic-control  management.   The  main components of the innovative approach are an automatic  system for  evaluation and monitoring of EQ including estimation and formation of nature-resource potential within 11 cadaster and other data base, general principles on evaluation and monitoring of EQ, structural and algorithmic schemes for evaluation of ecological state of administrative territories, calculation of generalized indices of nature-territorial complexes and solution of nature protection problems in respect of EQ monitoring. A system of equation calculation for the analysis and evaluation of technogenic load on main nature components of the environment (free air, water objects, soil cover, realization of monitoring function in respect of EQ and ecological state of local and urban territories, nature resources  and enterprises, pollution and state of some recipients and also data resources for execution of analytical calculations and functions directed on monitoring quality of nature components of the environment is advanced in the paper.

Total quality accounting

Directory of Open Access Journals (Sweden)

Andrijašević Maja

2008-01-01

Full Text Available The focus of competitive "battle" shifted from the price towards non-price instruments, above all, towards quality that became the key variable for profitability increase and achievement of better comparative position of a company. Under such conditions, management of a company, which, according to the established and certified system of total quality, strives towards achieving of a better market position, faces the problem of quality cost measurement and determination. Management, above all, cost accounting can help in solving of this problem, but the question is how much of its potential is being used for that purpose.

An Artificial Bee Colony Algorithm for the Job Shop Scheduling Problem with Random Processing Times

Directory of Open Access Journals (Sweden)

Rui Zhang

2011-09-01

Full Text Available Due to the influence of unpredictable random events, the processing time of each operation should be treated as random variables if we aim at a robust production schedule. However, compared with the extensive research on the deterministic model, the stochastic job shop scheduling problem (SJSSP has not received sufficient attention. In this paper, we propose an artificial bee colony (ABC algorithm for SJSSP with the objective of minimizing the maximum lateness (which is an index of service quality. First, we propose a performance estimate for preliminary screening of the candidate solutions. Then, the K-armed bandit model is utilized for reducing the computational burden in the exact evaluation (through Monte Carlo simulation process. Finally, the computational results on different-scale test problems validate the effectiveness and efficiency of the proposed approach.

Accounting for failure: risk-based regulation and the problems of ensuring healthcare quality in the NHS.

Science.gov (United States)

Beaussier, Anne-Laure; Demeritt, David; Griffiths, Alex; Rothstein, Henry

2016-05-18

In this paper, we examine why risk-based policy instruments have failed to improve the proportionality, effectiveness, and legitimacy of healthcare quality regulation in the National Health Service (NHS) in England. Rather than trying to prevent all possible harms, risk-based approaches promise to rationalise and manage the inevitable limits of what regulation can hope to achieve by focusing regulatory standard-setting and enforcement activity on the highest priority risks, as determined through formal assessments of their probability and consequences. As such, risk-based approaches have been enthusiastically adopted by healthcare quality regulators over the last decade. However, by drawing on historical policy analysis and in-depth interviews with 15 high-level UK informants in 2013-2015, we identify a series of practical problems in using risk-based policy instruments for defining, assessing, and ensuring compliance with healthcare quality standards. Based on our analysis, we go on to consider why, despite a succession of failures, healthcare regulators remain committed to developing and using risk-based approaches. We conclude by identifying several preconditions for successful risk-based regulation: goals must be clear and trade-offs between them amenable to agreement; regulators must be able to reliably assess the probability and consequences of adverse outcomes; regulators must have a range of enforcement tools that can be deployed in proportion to risk; and there must be political tolerance for adverse outcomes.

Beyond memory problems: multiple obstacles to health and quality of life in older people seeking help for subjective memory complaints.

Science.gov (United States)

Rotenberg Shpigelman, Shlomit; Sternberg, Shelley; Maeir, Adina

2017-08-29

Preliminary evidence suggests that older people who seek medical help for subjective memory complaints (SMC) may be at risk for depression, poor quality of life (QoL), and functional limitations. This study aims to: (1) further investigate bio-psycho-social characteristics, participation in personally meaningful activities and QoL of help-seekers; and (2) examine the relationship of these characteristics to QoL, and explore the unique contribution of participation to QoL. Cognitive, meta-cognitive, emotional, social, participation, and QoL measures were used to compare 51 help-seekers referred from geriatric clinics to 40 age-matched controls who did not seek help for memory problems. Help-seekers exhibited lower participation and QoL, had lower mean cognitive scores, reported more memory mistakes and negative memory-beliefs, more depression, worse self-efficacy, and less positive social interaction than non-help-seekers. Quality of life in help-seekers was significantly correlated with most variables. Participation contributed to the explained variance of QoL in help-seekers, beyond that accounted for by cognition and emotional status. Help-seekers with SMC exhibited a complex health condition that includes not only SMC, but also objective memory impairment, depression, functional restrictions, negative memory beliefs, low perception of memory abilities, reduced self-efficacy and insufficient social interactions, all associated with lower QoL. This multi-faceted condition should be considered in the treatment of help-seekers. Implications for Rehabilitation Older people who seek help for subjective memory complaints may be facing a larger problem involving bio-psycho-social factors, affecting participation in meaningful activities and quality of life. Quality of life may be improved via treatment of depression, functional restrictions, memory beliefs, self-efficacy, and positive social interactions. Participation in meaningful activities is an especially important

Power Quality Improvement by Unified Power Quality Conditioner Based on CSC Topology Using Synchronous Reference Frame Theory

Directory of Open Access Journals (Sweden)

Rajasekaran Dharmalingam

2014-01-01

Full Text Available This paper deals with the performance of unified power quality conditioner (UPQC based on current source converter (CSC topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems.

Power quality improvement by unified power quality conditioner based on CSC topology using synchronous reference frame theory.

Science.gov (United States)

Dharmalingam, Rajasekaran; Dash, Subhransu Sekhar; Senthilnathan, Karthikrajan; Mayilvaganan, Arun Bhaskar; Chinnamuthu, Subramani

2014-01-01

This paper deals with the performance of unified power quality conditioner (UPQC) based on current source converter (CSC) topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems.

Power Quality Improvement by Unified Power Quality Conditioner Based on CSC Topology Using Synchronous Reference Frame Theory

Science.gov (United States)

Dharmalingam, Rajasekaran; Dash, Subhransu Sekhar; Senthilnathan, Karthikrajan; Mayilvaganan, Arun Bhaskar; Chinnamuthu, Subramani

2014-01-01

This paper deals with the performance of unified power quality conditioner (UPQC) based on current source converter (CSC) topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems. PMID:25013854

Terms and definitions of quality assurance/quality control

International Nuclear Information System (INIS)

Kaden, W.

1980-01-01

Terms of quality assurance are defined and interpreted. Reference is made to the IAEA Code of Practice and to other important Codes and Standards like ANSI, ASME and KTA. The relevance of these terms to everyday's work and problems of a quality assurance engineer is explained. (orig.)

Problem-Solving Therapy During Outpatient Stroke Rehabilitation Improves Coping and Health-Related Quality of Life: Randomized Controlled Trial.

Science.gov (United States)

Visser, Marieke M; Heijenbrok-Kal, Majanka H; Van't Spijker, Adriaan; Lannoo, Engelien; Busschbach, Jan J V; Ribbers, Gerard M

2016-01-01

This study investigated whether problem-solving therapy (PST) is an effective group intervention for improving coping strategy and health-related quality of life (HRQoL) in patients with stroke. In this multicenter randomized controlled trial, the intervention group received PST as add-on to standard outpatient rehabilitation, the control group received outpatient rehabilitation only. Measurements were performed at baseline, directly after the intervention, and 6 and 12 months later. Data were analyzed using linear-mixed models. Primary outcomes were task-oriented coping as measured by the Coping Inventory for Stressful Situations and psychosocial HRQoL as measured by the Stroke-Specific Quality of Life Scale. Secondary outcomes were the EuroQol EQ-5D-5L utility score, emotion-oriented and avoidant coping as measured by the Coping Inventory for Stressful Situations, problem-solving skills as measured by the Social Problem Solving Inventory-Revised, and depression as measured by the Center for Epidemiological Studies Depression Scale. Included were 166 patients with stroke, mean age 53.06 years (SD, 10.19), 53% men, median time poststroke 7.29 months (interquartile range, 4.90-10.61 months). Six months post intervention, the PST group showed significant improvement when compared with the control group in task-oriented coping (P=0.008), but not stroke-specific psychosocial HRQoL. Furthermore, avoidant coping (P=0.039) and the utility value for general HRQoL (P=0.034) improved more in the PST group than in the control after 6 months. PST seems to improve task-oriented coping but not disease-specific psychosocial HRQoL after stroke >6-month follow-up. Furthermore, we found indications that PST may improve generic HRQoL recovery and avoidant coping. URL: http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=2509. Unique identifier: CNTR2509. © 2015 American Heart Association, Inc.

Impact of dynamic traffic management on air quality. Final report of a study on the impact of dynamic traffic management on the air quality along highways; Invloed DVM op de luchtkwaliteit. Eindrapport onderzoek naar het effect van dynamisch verkeersmanagement op de luchtkwaliteit langs snelwegen

Energy Technology Data Exchange (ETDEWEB)

Drewes, W.; Fransen, W. [DHV, Amersfoort (Netherlands)

2009-12-15

Within the Air Quality Innovation programme (IPL) a broad survey has been carried out on the possibilities of Dynamic Traffic Management (DTM) to improve air quality. This report finalizes the survey that was carried out within the IPL, and summarizes the results of the separate reports. Next to this final report, also a recommendation was made with regard to applying DTM to improve air quality. The final report starts with a comprehensive summary of the results of all the sub-surveys. In addition, for each sub-survey and other relevant publications, used in preparing the recommendation, the key issues and abstracts are presented. [Dutch] Binnen het Innovatieprogramma Luchtkwaliteit (IPL) is breed onderzoek gedaan naar de mogelijkheden om met Dynamisch Verkeersmanagement (DVM) de luchtkwaliteit te verbeteren. Dit rapport sluit het onderzoek dat binnen het IPL is uitgevoerd af en vat de afzonderlijk gerapporteerde resultaten samen. Naast dit eindrapport is ook een toepassingsadvies gericht op het inzetten van DVM ter verbetering van de luchtkwaliteit opgesteld. Het eindrapport begint met een integrale samenvatting van de resultaten van alle deelonderzoeken. Daarnaast zijn van elk deelonderzoek en andere relevante publicaties die gebruikt zijn bij het opstellen van het toepassingsadvies de kernpunten en beknopte samenvattingen opgenomen.

Conceptual design of semi-automatic wheelbarrow to overcome ergonomics problems among palm oil plantation workers

Science.gov (United States)

Nawik, N. S. M.; Deros, B. M.; Rahman, M. N. A.; Sukadarin, E. H.; Nordin, N.; Tamrin, S. B. M.; Bakar, S. A.; Norzan, M. L.

2015-12-01

An ergonomics problem is one of the main issues faced by palm oil plantation workers especially during harvesting and collecting of fresh fruit bunches (FFB). Intensive manual handling and labor activities involved have been associated with high prevalence of musculoskeletal disorders (MSDs) among palm oil plantation workers. New and safe technology on machines and equipment in palm oil plantation are very important in order to help workers reduce risks and injuries while working. The aim of this research is to improve the design of a wheelbarrow, which is suitable for workers and a small size oil palm plantation. The wheelbarrow design was drawn using CATIA ergonomic features. The characteristic of ergonomics assessment is performed by comparing the existing design of wheelbarrow. Conceptual design was developed based on the problems that have been reported by workers. From the analysis of the problem, finally have resulting concept design the ergonomic quality of semi-automatic wheelbarrow with safe and suitable used for palm oil plantation workers.

Detecting effects of the indicated prevention Programme for Externalizing Problem behaviour (PEP) on child symptoms, parenting, and parental quality of life in a randomized controlled trial.

Science.gov (United States)

Hanisch, Charlotte; Freund-Braier, Inez; Hautmann, Christopher; Jänen, Nicola; Plück, Julia; Brix, Gabriele; Eichelberger, Ilka; Döpfner, Manfred

2010-01-01

Behavioural parent training is effective in improving child disruptive behavioural problems in preschool children by increasing parenting competence. The indicated Prevention Programme for Externalizing Problem behaviour (PEP) is a group training programme for parents and kindergarten teachers of children aged 3-6 years with externalizing behavioural problems. To evaluate the effects of PEP on child problem behaviour, parenting practices, parent-child interactions, and parental quality of life. Parents and kindergarten teachers of 155 children were randomly assigned to an intervention group (n = 91) and a nontreated control group (n = 64). They rated children's problem behaviour before and after PEP training; parents also reported on their parenting practices and quality of life. Standardized play situations were video-taped and rated for parent-child interactions, e.g. parental warmth. In the intention to treat analysis, mothers of the intervention group described less disruptive child behaviour and better parenting strategies, and showed more parental warmth during a standardized parent-child interaction. Dosage analyses confirmed these results for parents who attended at least five training sessions. Children were also rated to show less behaviour problems by their kindergarten teachers. Training effects were especially positive for parents who attended at least half of the training sessions. CBCL: Child Behaviour Checklist; CII: Coder Impressions Inventory; DASS: Depression anxiety Stress Scale; HSQ: Home-situation Questionnaire; LSS: Life Satisfaction Scale; OBDT: observed behaviour during the test; PCL: Problem Checklist; PEP: prevention programme for externalizing problem behaviour; PPC: Parent Problem Checklist; PPS: Parent Practices Scale; PS: Parenting Scale; PSBC: Problem Setting and Behaviour checklist; QJPS: Questionnaire on Judging Parental Strains; SEFS: Self-Efficacy Scale; SSC: Social Support Scale; TRF: Caregiver-Teacher Report Form.

Relaxations to Sparse Optimization Problems and Applications

Science.gov (United States)

Skau, Erik West

Parsimony is a fundamental property that is applied to many characteristics in a variety of fields. Of particular interest are optimization problems that apply rank, dimensionality, or support in a parsimonious manner. In this thesis we study some optimization problems and their relaxations, and focus on properties and qualities of the solutions of these problems. The Gramian tensor decomposition problem attempts to decompose a symmetric tensor as a sum of rank one tensors.We approach the Gramian tensor decomposition problem with a relaxation to a semidefinite program. We study conditions which ensure that the solution of the relaxed semidefinite problem gives the minimal Gramian rank decomposition. Sparse representations with learned dictionaries are one of the leading image modeling techniques for image restoration. When learning these dictionaries from a set of training images, the sparsity parameter of the dictionary learning algorithm strongly influences the content of the dictionary atoms.We describe geometrically the content of trained dictionaries and how it changes with the sparsity parameter.We use statistical analysis to characterize how the different content is used in sparse representations. Finally, a method to control the structure of the dictionaries is demonstrated, allowing us to learn a dictionary which can later be tailored for specific applications. Variations of dictionary learning can be broadly applied to a variety of applications.We explore a pansharpening problem with a triple factorization variant of coupled dictionary learning. Another application of dictionary learning is computer vision. Computer vision relies heavily on object detection, which we explore with a hierarchical convolutional dictionary learning model. Data fusion of disparate modalities is a growing topic of interest.We do a case study to demonstrate the benefit of using social media data with satellite imagery to estimate hazard extents. In this case study analysis we

Least Squares Problems with Absolute Quadratic Constraints

Directory of Open Access Journals (Sweden)

R. Schöne

2012-01-01

Full Text Available This paper analyzes linear least squares problems with absolute quadratic constraints. We develop a generalized theory following Bookstein's conic-fitting and Fitzgibbon's direct ellipse-specific fitting. Under simple preconditions, it can be shown that a minimum always exists and can be determined by a generalized eigenvalue problem. This problem is numerically reduced to an eigenvalue problem by multiplications of Givens' rotations. Finally, four applications of this approach are presented.

Investigating sexual problems, psychological distress and quality of life in female patients with Takotsubo cardiomyopathy: A prospective case-control study.

Science.gov (United States)

Saffari, Mohsen; Lin, Chung-Ying; Broström, Anders; Mårtensson, Jan; Malm, Dan; Burri, Andrea; Fridlund, Bengt; Pakpour, Amir H

2017-10-01

Takotsubo cardiomyopathy (TSCM) has detrimental effects on both physical and psychological health of sufferers. However, little is known whether TSCM also affects sexual functioning in female patients. The aim of this study was to investigate psychological distress (depression and anxiety), health-related quality of life, and sexual functioning in women with TSCM and compare them with women with acute myocardial infarction and with healthy controls. A three group prospective case-control design was used. Female patients with TSCM or acute myocardial infarction, as well as healthy controls (94 in each group), were recruited across eight Iranian university hospitals. Data were collected at baseline and after six and 18 months using the Hospital Anxiety and Depression Scale, the Short Form-12, the Female Sexual Function Index and the Female Sexual Distress Scale. Multilevel logistic regression was conducted. The TSCM group showed worst sexual functioning and the highest level of anxiety and depression at baseline ( pquality of life at baseline, which was lower in both groups compared with the healthy controls ( pquality of life showed a significant change over time, especially in the TSCM group, with health-related quality of life decreasing, while anxiety and depression were increasing. Compared with the acute myocardial infarction and healthy control groups, the TSCM group showed a higher prevalence of sexual problems (odds ratios = 3.10 and 2.28, respectively) across time. Moreover, sexual functioning was found to be a mediator between anxiety and health-related quality of life in the TSCM group. Depression, anxiety, health-related quality of life, and sexual dysfunction tend to increase over time in female patients with TSCM; thus, healthcare providers should pay attention to these problems and provide appropriate treatment where necessary.

Development, problem behavior, and quality of life in a population based sample of eight-year-old children with Down syndrome.

Directory of Open Access Journals (Sweden)

Helma B M van Gameren-Oosterom

Full Text Available OBJECTIVE: Children with Down syndrome (DS have delayed psychomotor development. We investigated levels of development, problem behavior, and Health-Related Quality of Life (HRQoL in a population sample of Dutch eight-year-old children with DS. Developmental outcomes were compared with normative data of eight-year-old children from the general population. METHOD: Over a three-year-period all parents with an eight-year-old child with DS were approached by the national parent organization. Developmental skills were assessed by means of the McCarthy Scales of Children's Ability. To measure emotional and behavioral problems we used the Child Behavior Checklist. HRQoL was assessed with the TNO-AZL Children's Quality of Life questionnaire. Analyses of variance were applied to compare groups. RESULTS: A total of 337 children participated. Mean developmental age was substantially lower than mean calendar age (3.9 years, SD 0.87 and 8.1 years, SD 0.15 respectively. Mean developmental age was significantly lower among boys than girls (3.6 (SD 0.85 and 4.2 years (SD 0.82 respectively; p<0.001. Compared with the general population, children with DS had more emotional and behavioral problems (p<0.001. However on the anxious/depressed scale, they scored significantly more favorably (p<0.001. Significantly lower HRQoL scores for the scales gross motor skills, autonomy, social functioning and cognitive functioning were found (p-values<0.001. Hardly any differences were observed for the scales physical complaints, positive and negative emotions. CONCLUSION: Eight-year-old children with DS have an average developmental delay of four years, more often have emotional and behavioral problems, and have a less favorable HRQoL compared with children from the general population.

Optimal Design of TCR/FC in Electric Arc Furnaces for Power Quality Improvement in Power Systems

Directory of Open Access Journals (Sweden)

Mahdi TORABIAN ESFAHANI

2009-12-01

Full Text Available Electric Arc Furnaces (EAFs are unbalanced, nonlinear and time varying loads, which can cause many problems in the power system quality. As the use of arc furnace loads increases in industry, the importance of the power quality problems also increase. So in order to optimize the usages of electric power in EAFs, it is necessary to minimize the effects of arc furnace loads on power quality in power systems as much as possible. Therefore, in this paper, design and simulation of an electric plant supplying an arc furnace is considered. For this purpose, a three phase arc furnace model, which can simulate all the mentioned power quality indices, is developed based on Hyperbolic -Exponential model (V-I model. Then by considering the high changes of reactive power and voltage flicker of nonlinear furnace load, a thyristor controlled reactor compensation with fixed capacitor (TCR/FC are designed and simulated. In this procedure, the reactive power is measured so that maximum speed and accuracy are achieved. Finally, simulation results verify the accuracy of the load modelling and show the effectiveness of the proposed TCR/FC model for reactive compensating of the EAF.

Sustainable urban environmental quality

Directory of Open Access Journals (Sweden)

Tošković Dobrivoje

2004-01-01

Full Text Available MEANING as the essential element of urban quality. The role of the three main factors for the urban quality achievement: PLANNING, DEVELOPMENT and PEOPLE. Next to that, it is important to assume the identity of the local CONTEXT as the essential base for designing and shaping of form development. The problems of the quality achievements in the situation of the permanent changes. In such an environment - the RENEWAL of the towns become the basic strategic orientation requiring - evaluation of the development policy instruments. On the road of changes there are PROBLEMS of a strategic nature which should be, firstly, defined and, then, solved before entering in the process of structuring and arrangement. One of these problems is NEW versus OLD. Transition to a new policy of urbanism relying, first of all, on the private investors and international funds of the local authorities - call for a NEW STRATEGY in urbanism, in the context of the sustainability of environment. The sustainability of quality and the categories of the influencing factors. The sustainability of quality as a twofold process of urban design. The quality of environment as an aesthetic phenomenon. The urban situation and environmental quality: feasibility of changes and effects; the environmental capacity as an indicator and quality determinant. The urban quality and international experience. The evaluation of our urban situation. INSTEAD OF CONCLUSION: A general review on the visions and urban quality policy and planning. Toward an evaluation of urban environmental quality: negative and positive indicators; sustainable communities environmental ruling and urban quality planning.

Improving Segmentation of 3D Retina Layers Based on Graph Theory Approach for Low Quality OCT Images

Directory of Open Access Journals (Sweden)

Stankiewicz Agnieszka

2016-06-01

Full Text Available This paper presents signal processing aspects for automatic segmentation of retinal layers of the human eye. The paper draws attention to the problems that occur during the computer image processing of images obtained with the use of the Spectral Domain Optical Coherence Tomography (SD OCT. Accuracy of the retinal layer segmentation for a set of typical 3D scans with a rather low quality was shown. Some possible ways to improve quality of the final results are pointed out. The experimental studies were performed using the so-called B-scans obtained with the OCT Copernicus HR device.

Problem representation and mathematical problem solving of students of varying math ability.

Science.gov (United States)

Krawec, Jennifer L

2014-01-01

The purpose of this study was to examine differences in math problem solving among students with learning disabilities (LD, n = 25), low-achieving students (LA, n = 30), and average-achieving students (AA, n = 29). The primary interest was to analyze the processes students use to translate and integrate problem information while solving problems. Paraphrasing, visual representation, and problem-solving accuracy were measured in eighth grade students using a researcher-modified version of the Mathematical Processing Instrument. Results indicated that both students with LD and LA students struggled with processing but that students with LD were significantly weaker than their LA peers in paraphrasing relevant information. Paraphrasing and visual representation accuracy each accounted for a statistically significant amount of variance in problem-solving accuracy. Finally, the effect of visual representation of relevant information on problem-solving accuracy was dependent on ability; specifically, for students with LD, generating accurate visual representations was more strongly related to problem-solving accuracy than for AA students. Implications for instruction for students with and without LD are discussed.

76 FR 72097 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

Science.gov (United States)

2011-11-22

... Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This rule establishes air quality designations for most areas in the United States for the 2008 lead (Pb) National Ambient Air Quality Standards...

Influence of final baking technologies in partially baked frozen gluten-free bread quality.

Science.gov (United States)

Aguilar, Núria; Albanell, Elena; Miñarro, Begoña; Gallardo, Joan; Capellas, Marta

2015-03-01

The effect of final baking in convection oven (FBC), microwave oven (FBM), and microwave oven with susceptor packaging material (FBMS) on partially baked (PB) frozen gluten-free bread characteristics was investigated. Specific volume and crust color of loaves were measured at day 0. Bread moisture, water activity, and crumb and crust texture (at 15, 45, and 90 min after baking) were analyzed at day 0 and after 28 d of frozen storage (-18 °C). Volatile compounds from breads baked in convection oven or microwave oven with susceptor packaging material were also evaluated. Bread finally baked in convection oven or in microwave oven with susceptor packaging increased crust browning. Crumb and roll hardness increased with time after final baking (measured at 15, 45, 90 min) and after 28 d of frozen storage. Bread finally baked in microwave oven was the hardest, due to high water losses. At day 0, bread finally baked in convection oven had softer crumb than bread finally baked in microwave oven with susceptor packaging but, after 28 d of frozen storage, there were no differences between them. Moreover, FBC and FBMS rendered gluten-free breads that could not be distinguished in a triangular test and had the same volatile compounds profile. In conclusion, FBMS could be an alternative to FBC. © 2015 Institute of Food Technologists®

An assessment of factorial structure and health-related quality of life in problem drug users using the Short Form 36 Health Survey

NARCIS (Netherlands)

Buchholz, Angela; Krol, Anneke; Rist, Fred; Nieuwkerk, Pythia T.; Schippers, Gerard M.

2008-01-01

AIMS: To confirm the factorial structure of the Short Form 36 Health Survey (SF-36) in problem drug users and to compare their health-related quality of life (HRQOL) with general Dutch population norms. METHOD: Data of 394 participants from the Amsterdam Cohort Study among drug users, who had

Reviewing the quality of strategic environmental assessment reports for English spatial plan core strategies

International Nuclear Information System (INIS)

Fischer, Thomas B.

2010-01-01

This paper summarises the results of a research project from early 2008, involving the author of this paper, as well as 18 post-graduate University of Liverpool students, in which the quality of European Directive based strategic environmental assessment (SEA) reports of English spatial plan core strategies (conducted within the context of the spatial planning sustainability appraisal-SA-regime) was reviewed. The project aimed at establishing the extensiveness of emerging spatial plan related SEA practice, as well as highlighting shortcomings and problems. Overall, it was found that whilst some aspects of assessment were done well, others were not of a satisfactory quality. Shortcomings were connected particularly with the practice of listing potentially relevant baseline documents and data without distinguishing sufficiently between those that are important in terms of significant impacts and those that are not. Problems were also found to exist with the evaluation of options and impacts, the consideration of substantive aspects, such as health, as well as regarding the formulation of final recommendations and monitoring.

Quality Minus Junk

DEFF Research Database (Denmark)

Asness, Clifford S.; Frazzini, Andrea; Heje Pedersen, Lasse

We define a quality security as one that has characteristics that, all-else-equal, an investor should be willing to pay a higher price for: stocks that are safe, profitable, growing, and well managed. High-quality stocks do have higher prices on average, but not by a very large margin. Perhaps....... The price of quality – i.e., how much investors pay extra for higher quality stocks – varies over time, reaching a low during the internet bubble. Further, a low price of quality predicts a high future return of QMJ. Finally, controlling for quality resurrects the otherwise moribund size effect....

Physics-based Inverse Problem to Deduce Marine Atmospheric Boundary Layer Parameters

Science.gov (United States)

2017-03-07

knowledge and capabilities in the use and development of inverse problem techniques to deduce atmospheric parameters. WORK COMPLETED The research completed...please find the Final Technical Report with SF 298 for Dr. Erin E. Hackett’s ONR grant entitled Physics -based Inverse Problem to Deduce Marine...From- To) 07/03/2017 Final Technica l Dec 2012- Dec 2016 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Physics -based Inverse Problem to Deduce Marine

DIAGNOSTIC PROBLEMS OF MUCOVISCIDOSIS AND WAYS OF SOLUTION IN RUSSIA

Directory of Open Access Journals (Sweden)

A. A. Baranov

2014-01-01

Full Text Available Mucoviscidosis is a monogenic autosomal recessive caused by the CFTR gene mutations and characterized by pronounced genetic heterogeneity and clinical polymorphism, which emphasizes the need in comprehensive diagnosis and molecular-genetic verification of the final diagnosis. Quality and duration of a mucoviscidosis patient depend on early diagnosis and timely adequate therapy. The article presents mucoviscidosis diagnostic methods and protocols and capabilities of the modern molecular-genetic pathological diagnosis; a review of DNA diagnostic sets has been performed. As sets of some of the genes typical to the Russian population have not been registered in the Russian Federation, mutations in 20% of the patients cannot be specified. In order to solve this problem it is necessary to develop DNA diagnostic sets specific for the Russian Federation, ensure genetic diagnosis of the disease, including sequencing methods at the expense of the federal budget, increase the amount of information and improve quality of teaching this discipline to  students of medial universities and at postgraduate courses for appropriate specialists. 

Construction quality assurance closure report, Lawrence Livermore National Laboratory Site 300, Pits 1 and 7

International Nuclear Information System (INIS)

1993-02-01

This document presents the Final Construction Quality Assurance (CQA) report for the closure cover system of two mixed, low-level radioactive and hazardous waste landfills (pits) at Site 300. Site 300, operated by the Lawrence Livermore National Laboratory (LLNL), is located in the Altamont Hills, approximately 15 miles southeast of Livermore, California. The purpose of this report is to document the CQA program established to assure that construction is completed in accordance with the design intent and the approved Closure and Post Closure Plans dated May 1989 and revised January 1990 (EPA ID Number: CA 2890090002). Inclusive within the Closure and Post Closure Plan were the CQA Plan and the Technical Specifications for the final cover system. This report contains a complete narrative with photographic documentation of the construction activities and progress, problems encountered and solutions utilized, and third party testing and monitoring results, thus establishing the verification of compliance with the Quality Assurance Plan for the project

Problem solving skills for schizophrenia.

Science.gov (United States)

Xia, J; Li, Chunbo

2007-04-18

The severe and long-lasting symptoms of schizophrenia are often the cause of severe disability. Environmental stress such as life events and the practical problems people face in their daily can worsen the symptoms of schizophrenia. Deficits in problem solving skills in people with schizophrenia affect their independent and interpersonal functioning and impair their quality of life. As a result, therapies such as problem solving therapy have been developed to improve problem solving skills for people with schizophrenia. To review the effectiveness of problem solving therapy compared with other comparable therapies or routine care for those with schizophrenia. We searched the Cochrane Schizophrenia Group's Register (September 2006), which is based on regular searches of BIOSIS, CENTRAL, CINAHL, EMBASE, MEDLINE and PsycINFO. We inspected references of all identified studies for further trials. We included all clinical randomised trials comparing problem solving therapy with other comparable therapies or routine care. We extracted data independently. For homogenous dichotomous data we calculated random effects, relative risk (RR), 95% confidence intervals (CI) and, where appropriate, numbers needed to treat (NNT) on an intention-to-treat basis. For continuous data, we calculated weighted mean differences (WMD) using a random effects statistical model. We included only three small trials (n=52) that evaluated problem solving versus routine care, coping skills training or non-specific interaction. Inadequate reporting of data rendered many outcomes unusable. We were unable to undertake meta-analysis. Overall results were limited and inconclusive with no significant differences between treatment groups for hospital admission, mental state, behaviour, social skills or leaving the study early. No data were presented for global state, quality of life or satisfaction. We found insufficient evidence to confirm or refute the benefits of problem solving therapy as an additional

A High-Performance Genetic Algorithm: Using Traveling Salesman Problem as a Case

Directory of Open Access Journals (Sweden)

Chun-Wei Tsai

2014-01-01

Full Text Available This paper presents a simple but efficient algorithm for reducing the computation time of genetic algorithm (GA and its variants. The proposed algorithm is motivated by the observation that genes common to all the individuals of a GA have a high probability of surviving the evolution and ending up being part of the final solution; as such, they can be saved away to eliminate the redundant computations at the later generations of a GA. To evaluate the performance of the proposed algorithm, we use it not only to solve the traveling salesman problem but also to provide an extensive analysis on the impact it may have on the quality of the end result. Our experimental results indicate that the proposed algorithm can significantly reduce the computation time of GA and GA-based algorithms while limiting the degradation of the quality of the end result to a very small percentage compared to traditional GA.

Computer software quality assurance

International Nuclear Information System (INIS)

Ives, K.A.

1986-06-01

The author defines some criteria for the evaluation of software quality assurance elements for applicability to the regulation of the nuclear industry. The author then analyses a number of software quality assurance (SQA) standards. The major extracted SQA elements are then discussed, and finally specific software quality assurance recommendations are made for the nuclear industry

Final disposition of MTR fuel

International Nuclear Information System (INIS)

Jonnson, Erik B.

1996-01-01

The final disposition of power reactor fuel has been investigated for a long time and some promising solutions to the problem have been shown. The research reactor fuels are normally not compatible with the zirkonium clad power reactor fuel and can thus not rely on the same disposal methods. The MTR fuels are typically Al-clad UAl x or U 3 Si 2 , HEU resp. LEU with essentially higher remaining enrichment than the corresponding power reactor fuel after full utilization of the uranium. The problems arising when evaluating the conditions at the final repository are the high corrosion rate of aluminum and uranium metal and the risk for secondary criticality due to the high content on fissionable material in the fully burnt MTR fuel. The newly adopted US policy to take back Foreign Research Reactor Spent Fuel of US origin for a period of ten years have given the research reactor society a reasonable time to evaluate different possibilities to solve the back end of the fuel cycle. The problem is, however, complicated and requires a solid engagement from the research reactor community. The task would be a suitable continuation of the RERTR program as it involves both the development of new fuel types and collecting data for the safe long-term disposal of the spent MTR fuel. (author)

Challenge Problem Development and Evaluation Management

National Research Council Canada - National Science Library

Schrag, Robert

2001-01-01

This final report describes work performed by Information Extraction & Transport (IET), Inc. on Challenge Problem Development and Evaluation Management for the Defense Advanced Research Projects Agency's...

Farmers' seed sources and seed quality: 1. Physical and physiological quality

NARCIS (Netherlands)

Bishaw, Z.; Struik, P.C.; Gastel, van A.J.G.

2012-01-01

Understanding farmers' seed quality problem will enable farmers to devise strategies to improve quality at the farm level. The study was conducted to assess the quality of seed used by farmers from different sources and regions. A total of 304 wheat (Trticium aestivum L. and T. durum L.) seed

Materials of conference: Hydrogeological Problems of South-West Poland

International Nuclear Information System (INIS)

1996-01-01

Hydrogeological problems of South-west Poland is the collection of conference papers held in Szklarska Poreba on 20-22 June 1996. The materials have been gathered in three topical groups: water quality problems in hydrological cycle, regional hydrogeology of South-west Poland, theoretical problems and research methods in hydrogeology. More of performed articles have a interdisciplinary character taking into account the precipitation and surface water quality and their influence on ground water features

Quality and safety of agri-food systems: technological and economic innovations

Directory of Open Access Journals (Sweden)

Domenico Ragazzi

2008-04-01

Full Text Available This study aims to point out the evolution of the economical approach to the topics of agri-food product quality and safety with particular attention to the schemes developed at European level. Thus, we wish to underline the forces which identified the insurance and certification systems as innovative tools for quality problem management in agri-food systems and what aspects they allow to manage according to the different needs of the stakeholders. In the last years, the proliferation of these schemes was so strong to considered the recent Iso 22000 Law as a possible solution for the harmonization process. Finally, some aspects of traceability systems are examined, apart from law obligations, identifying important opportunity of differentiation and acquisition of competitive advantages for the organization choosing them.

Improving ELM-Based Service Quality Prediction by Concise Feature Extraction

Directory of Open Access Journals (Sweden)

Yuhai Zhao

2015-01-01

Full Text Available Web services often run on highly dynamic and changing environments, which generate huge volumes of data. Thus, it is impractical to monitor the change of every QoS parameter for the timely trigger precaution due to high computational costs associated with the process. To address the problem, this paper proposes an active service quality prediction method based on extreme learning machine. First, we extract web service trace logs and QoS information from the service log and convert them into feature vectors. Second, by the proposed EC rules, we are enabled to trigger the precaution of QoS as soon as possible with high confidence. An efficient prefix tree based mining algorithm together with some effective pruning rules is developed to mine such rules. Finally, we study how to extract a set of diversified features as the representative of all mined results. The problem is proved to be NP-hard. A greedy algorithm is presented to approximate the optimal solution. Experimental results show that ELM trained by the selected feature subsets can efficiently improve the reliability and the earliness of service quality prediction.

Final disposition and quality auditing of the rehabilitation process in wild raptors admitted to a Wildlife Rehabilitation Centre in Catalonia, Spain, during a twelve year period (1995-2007).

Science.gov (United States)

Molina-López, Rafael A; Casal, Jordi; Darwich, Laila

2013-01-01

Variability in reporting and classification methods in previous published data of the final dispositions in the rehabilitation of wild raptors makes use of this data limited in trying to audit the quality of the rehabilitation process. Crude as well as stratified disposition rates are needed if quality auditing of the rehabilitation process is to be adequately performed. Final dispositions of 6221 hospitalized wild raptors admitted at a wildlife rehabilitation centre (WRC) of Catalonia during 1995-2007 were analyzed. These dispositions were calculated as the euthanasia (Er), unassisted mortality (Mr), release (Rr) and captivity rates (Cr)., time to death (Td) for dead and euthanized raptors, and length of stay for released (Tr) raptors was estimated. Stratified analyses by main causes of admission and clinical signs were performed. THE DISPOSITION FOR THE TOTAL POPULATION WERE: Er = 30.6%, Mr = 19.1%, Rr = 47.2%, and Cr = 3%. By main causes of admission, Er was higher in the trauma category (34.2%), whereas Mr was found similar between trauma (37.4%) and non-trauma categories (34.8%). The highest Rr was observed for the orphaned group (77.9%). Furthermore, Cr was low in all the categories (auditing of the rehabilitation process quality.

Software to implement the IAEA-TECDOC 1517: quality control in mammography

International Nuclear Information System (INIS)

Mora Rodriguez, Patricia

2011-01-01

Mammography quality control is presented; also, guidelines for establishing a quality control program through tests to be performed, equipment, frequencies and tolerances. The work is intended for radiologists, medical physicists and technologists. Also examples of data collection sheets, minimum equipment list and overview of a quality control program are included. Two projects (RLA/9/057 and RLA/9/067) raised the goal of developing a software that allows a simple and effective way to automate the evidence contained in the TECDOC. The V1 is presented in the IRPA 12 (2008), which was tested in some countries to detect problems in their use and include possible improvements. However, the final revised version for distribution in member countries was get in 2010. The way of work on the project is described and who has worked. Also, a complete program, its importance and the projection of the Universidad de Costa Rica to work with the same. (author) [es

Calculus problems

CERN Document Server

Baronti, Marco; van der Putten, Robertus; Venturi, Irene

2016-01-01

This book, intended as a practical working guide for students in Engineering, Mathematics, Physics, or any other field where rigorous calculus is needed, includes 450 exercises. Each chapter starts with a summary of the main definitions and results, which is followed by a selection of solved exercises accompanied by brief, illustrative comments. A selection of problems with indicated solutions rounds out each chapter. A final chapter explores problems that are not designed with a single issue in mind but instead call for the combination of a variety of techniques, rounding out the book’s coverage. Though the book’s primary focus is on functions of one real variable, basic ordinary differential equations (separation of variables, linear first order and constant coefficients ODEs) are also discussed. The material is taken from actual written tests that have been delivered at the Engineering School of the University of Genoa. Literally thousands of students have worked on these problems, ensuring their real-...

Psychrotrophic bacteria and their negative effects on milk and dairy products quality

Directory of Open Access Journals (Sweden)

Šimun Zamberlin

2012-06-01

Full Text Available The characteristics of bacterial populations in raw milk at the time of processing has a significant influence on shelf-life, organoleptic quality, spoilage and yields of raw milk, processed milk as well as on the other dairy products. Unfortunately, cold and extended storage of raw milk, as a common practice in dairy sector today, favour the growth of psychrotrophic bacteria. Therefore, their count in the refrigerated milk is more than the ideal limit of 10 % of the mesophilic count. Psychrotrophic bacteria are generally able to form extracellular or intracellular thermo-resistant enzymes (proteases, lipases, phospolipases which can contribute to milk and dairy products spoilage. In addition, besides exhibiting spoilage features, some species belonging to the psychrotrops are considered as emerging pathogens that carry innate resistance to antibiotics or produce toxins. In sense of quality, psychrotrophic bacteria have become major problem for today’s dairy industry as leading cause in spoilage of cold-storage milk and dairy products. This review article focuses on the impact of psychrotrops on quality problems associated with raw milk as well as on th final dairy products. Means of controlling the dominant psychrotrophic species responsible for undesirable activities in milk and dairy products were also discussed.

[Quality scale for preschool spirometry interpretation].

Science.gov (United States)

Gatto, Francisca; Bedregal, Paula; Ubilla, Carlos; Barrientos, Hortensia; Caussade, Solange

2017-02-01

Since 2007, there are international guidelines for implementation and interpretation of spirometry in preschool children. A percentage of these patients cannot obtain maneuvers that meet all eligibility criteria. The objective of this study was to develop a quality scale for interpreting these partially acceptable spirometry. Delphi methodology was used, which allows to reach consensus among experts analyzing a defined problem. We invited to participate pediatric pneumologists dedicated to lung function and who participated actively in scientific specialty societies in Chile. Successive rounds were conducted with questionnaires about criteria used to assess spirometry in preschool children. These criteria define the acceptability of spirometric maneuvers according to international guidelines. Proposed quality grades were “very good”, “good”, “fair” and “bad”. Thirteen of the 15 invited experts accepted our invitation. In the first round 9 disagreed with the degree of “regular” quality. In the second round this was removed and 11 experts answered, 9 of them agreed with the use of this new version. The most contentious criterion was the end of expiration. Most experts agreed with the final scale, using “very good”, “good” and “bad” judgments. This would help to improve the performance of spirometry in children between 2 and 5 years.

Student evaluation of a problem-oriented module of clinical medicine within a revised dental curriculum.

Science.gov (United States)

Tack, C J; Plasschaert, A J M

2006-05-01

As part of a revised dental curriculum, a 3(rd) year module on medical subjects was developed based on a mixture of self-study and problem-oriented approach using cases. Pairs of students had to select a specific medical problem and solve a paper patient case using a problem-solving cycle. Results were presented in working groups and by writing an essay. The quality of the presentations was assessed by colleague students and by the teacher supervisor; the expert teacher in the field graded the essay. The results contributed for 40% to the overall grade of the module. A questionnaire filled out by 94% of the participating students showed that 85% of the students agreed in preferring this way of handling medical problems as compared with conventional, lecture-based education. Almost all of them enjoyed the provided opportunity to give a case presentation. The problem-oriented model was assessed as useful by 73% of the students. Knowledge concerning the topic chosen turned out to be higher than knowledge of other topics. Although this study cannot prove that this mode of education actually results in a better ability to cope with medical problems, it may contribute in several ways to the final competences in the area of general medicine in the undergraduate dental curriculum.

A Very Different Non-Stressful Comprehensive Final Exam that Achieve Our Goals for Student Evaluation and Learning

Science.gov (United States)

Bhavsar, Suketu

2015-08-01

I will introduce the radical concept of a final exam where the questions are given beforehand, a method I first encountered as a graduate student at Princeton University from an outstanding and well known astrophysicist and exceptional teacher, Lyman Spitzer.Every Instructor aspires for students to master all the material covered. A comprehensive final can assess the breadth and depth of their learning. Students are required to review early material in light of later topics, create connections and integrate understanding, thus retaining knowledge for the long term. Comprehensive finals can therefore be a significant basis for student learning and evaluation, but are especially daunting for non-STEM majors in required GE synthesis STEM classes. The exam format proposed here calmed student fears and encouraged thorough review.Ten days before the exam students received 20-30 challenging, well-crafted, numbered questions that interconnected and spanned the entire range of topics. The key is crafting questions that lead to deeply understanding the subject matter and mastering skills to solve problems. At the final, each student was required to pick a number out of a hat and answer that numbered question in a 5-minute presentation. They also had to critically comment on 10 other presentations of their peers. They are graded equally on both.The exam sets up definite goals for a student. Equally important, it enhances collaborative learning and peer mentoring. The conceptual questions and problems that students are required to answer can be studied together in study groups. The final presentation is theirs and they are not only encouraged but required to be constructively critical of their peer presentations.I will provide examples of some of the conceptual and problem solving questions I used. These were crafted to interconnect and span the entire range of topics. This method requires students to be prepared for all of the multitude of crafted question encouraging

The development of the Quality Indicator for Rehabilitative Care (QuIRC: a measure of best practice for facilities for people with longer term mental health problems

Directory of Open Access Journals (Sweden)

Visser Ellen

2011-03-01

Full Text Available Abstract Background Despite the progress over recent decades in developing community mental health services internationally, many people still receive treatment and care in institutional settings. Those most likely to reside longest in these facilities have the most complex mental health problems and are at most risk of potential abuses of care and exploitation. This study aimed to develop an international, standardised toolkit to assess the quality of care in longer term hospital and community based mental health units, including the degree to which human rights, social inclusion and autonomy are promoted. Method The domains of care included in the toolkit were identified from a systematic literature review, international expert Delphi exercise, and review of care standards in ten European countries. The draft toolkit comprised 154 questions for unit managers. Inter-rater reliability was tested in 202 units across ten countries at different stages of deinstitutionalisation and development of community mental health services. Exploratory factor analysis was used to corroborate the allocation of items to domains. Feedback from those using the toolkit was collected about its usefulness and ease of completion. Results The toolkit had excellent inter-rater reliability and few items with narrow spread of response. Unit managers found the content highly relevant and were able to complete it in around 90 minutes. Minimal refinement was required and the final version comprised 145 questions assessing seven domains of care. Conclusions Triangulation of qualitative and quantitative evidence directed the development of a robust and comprehensive international quality assessment toolkit for units in highly variable socioeconomic and political contexts.

Some problems in methodology of economjc evaluation of radiation technique quality

International Nuclear Information System (INIS)

Kodyukov, V.M.; Purtova, M.I.; Sokolova, Z.I.; Smirnova, Z.M.

1976-01-01

The quality of radiation equipment (RE) should essentially be assessed when designing, standardizing, planning, and evaluating the cost and economy of RE. The basic factors are sited upon which subsequent economic assessment of quality levels were based. It also discusses the specifics involved in determining the principal quality factors for radioisotopic flaw-detection equipment and gamma-therapeutic instruments

Reactor physics problems on HCPWR

International Nuclear Information System (INIS)

Ishiguro, Yukio; Akie, Hiroshi; Kaneko, Kunio; Sasaki, Makoto.

1986-01-01

Reactor physics problems on high conversion pressurized water reactors (HCPWRs) are discussed. Described in this report are outline of the HCPWR, expected accuracy for the various reactor physical qualities, and method for K-effective calculation in the resonance energy area. And requested further research problems are shown. The target value of the conversion ratio are also discussed. (author)

Parental Problem-Solving Abilities and the Association of Sickle Cell Disease Complications with Health-related Quality of Life for School-age Children

Science.gov (United States)

Barakat, Lamia P.; Daniel, Lauren C.; Smith, Kelsey; Robinson, M. Renée; Patterson, Chavis A.

2013-01-01

Children with sickle cell disease (SCD) are at risk for poor health-related quality of life (HRQOL). The current analysis sought to explore parent problem-solving abilities/skills as a moderator between SCD complications and HRQOL to evaluate applicability to pediatric SCD. At baseline, 83 children ages 6–12 years and their primary caregiver completed measures of the child HRQOL. Primary caregivers also completed a measure of social problem-solving. A SCD complications score was computed from medical record review. Parent problem-solving abilities significantly moderated the association of SCD complications with child self-report psychosocial HRQOL (p = .006). SCD complications had a direct effect on parent proxy physical and psychosocial child HRQOL. Enhancing parent problem-solving abilities may be one approach to improve HRQOL for children with high SCD complications; however, modification of parent perceptions of HRQOL may require direct intervention to improve knowledge and skills involved in disease management. PMID:24222378

Quality of care and service trajectories for people with intellectual disabilities: defining the aspects of quality from the client's perspective.

Science.gov (United States)

Barelds, Anna; van de Goor, Ien; van Heck, Guus; Schols, Jos

2010-03-01

Care and service trajectories for people with intellectual disabilities (i.e. people with mental retardations) are routes within the healthcare delivery system that consist of all the steps that people with intellectual disabilities and their families have to take in order to realise the needed care and services. This article aims to identify the quality aspects of trajectories that are considered important by people with intellectual disabilities and their parents/relatives. In addition, it examines how these aspects are related to quality determinants mentioned in the literature on integrated care and to authoritative models for quality assessment of care and service delivery. Quality aspects were collected during eight focus group discussions with people with intellectual disabilities or their parents/relatives. In addition, quality determinants of integrated care and authoritative models for quality assessment were selected by means of a thorough review of the literature. Finally, the quality aspects identified using focus groups were compared to the determinants and models found in the literature. The quality aspects presented by people with intellectual disabilities referred particularly to the immediate situation in receiving care and services, such as 'keeping appointments' and 'time and attention', whereas parents/relatives also referred to broader 'organisational issues', such as 'access to support' and 'problems with placement'. The quality aspects, however, are minimally related to the quality determinants of integrated care, probably because clients and their parents/relatives find it difficult to have an overview of the coherence between the various actions that have to be performed, when going through the trajectories. In contrast, the quality aspects seem to fit into the domains of the authoritative models for quality assessment, probably because of the minimal focus of the models on long-term aspects in care and service delivery.

How to Measure and Interpret Quality Improvement Data.

Science.gov (United States)

McQuillan, Rory Francis; Silver, Samuel Adam; Harel, Ziv; Weizman, Adam; Thomas, Alison; Bell, Chaim; Chertow, Glenn M; Chan, Christopher T; Nesrallah, Gihad

2016-05-06

This article will demonstrate how to conduct a quality improvement project using the change idea generated in "How To Use Quality Improvement Tools in Clinical Practice: How To Diagnose Solutions to a Quality of Care Problem" by Dr. Ziv Harel and colleagues in this Moving Points feature. This change idea involves the introduction of a nurse educator into a CKD clinic with a goal of increasing rates of patients performing dialysis independently at home (home hemodialysis or peritoneal dialysis). Using this example, we will illustrate a Plan-Do-Study-Act (PDSA) cycle in action and highlight the principles of rapid cycle change methodology. We will then discuss the selection of outcome, process, and balancing measures, and the practicalities of collecting these data in the clinic environment. We will also introduce the PDSA worksheet as a practical way to oversee the progress of a quality improvement project. Finally, we will demonstrate how run charts are used to visually illustrate improvement in real time, and how this information can be used to validate achievement, respond appropriately to challenges the project may encounter, and prove the significance of results. This article aims to provide readers with a clear and practical framework upon which to trial their own ideas for quality improvement in the clinical setting. Copyright © 2016 by the American Society of Nephrology.

6 sigma quality performance

International Nuclear Information System (INIS)

Yu, Yeong Hak

2000-03-01

This deals with 6 sigma quality performance introducing company which has 6 sigma quality management, 6 sigma quality activity and customer, secret of success of 6 sigma quality management, what 6 sigma is, 6 sigma quality management propel system 5 propel steps of project like point of 6 sigma, flow of problem solution, tool for propel of project, performance of CTQ and total customer satisfaction, and quality management system and 6 sigma quality.

Quality prediction and mistake proofing: An LDRD final report

Energy Technology Data Exchange (ETDEWEB)

McDonald, M.J.

1998-03-01

Sandia National Laboratories is responsible for assuring that the US nuclear deterrent remains credible and that the one in a billion disaster of unintended nuclear detonation never occurs. Letting mistake-generated defects into the stockpile would undermine its mission. The current era of shrinking stockpiles is shrinking Sandia`s opportunities to discover and correct mistakes and fine tune processes over long production runs. In response, Sandia has chosen to develop and use a science-based, life cycle systems engineering practices that, in part, require understanding the design to manufacturing issues in enough detail to tune processes and eliminate mistakes before ever making a part. Defect prevention is a key area of concern that currently lacks sufficient theoretical understanding. This report is the result of a scoping study in the application of best-practice quality techniques that could address Sandia`s stockpile mission. The study provides detail on sources and control of mistakes, poka-yoke or mistake-proofing techniques, the Toyota Production system, and design theory in relation to manufacturing quality prediction. Scoping experiments are described and areas for future research are identified.

Improvement of power quality using distributed generation

Energy Technology Data Exchange (ETDEWEB)

Moreno-Munoz, A.; Lopez-Rodriguez, M.A.; Flores-Arias, J.M.; Bellido-Outerino, F.J. [Universidad de Cordoba, Departamento A.C., Electronica y T.E., Escuela Politecnica Superior, Campus de Rabanales, E-14071 Cordoba (Spain); de-la-Rosa, J.J.G. [Universidad de Cadiz, Area de Electronica, Dpto. ISA, TE y Electronica, Escuela Politecnica Superior Avda, Ramon Puyol, S/N, E-11202-Algeciras-Cadiz (Spain); Ruiz-de-Adana, M. [Universidad de Cordoba, Departamento de Quimica Fisica y Termodinamica Aplicada, Campus de Rabanales, E-14071 Cordoba (Spain)

2010-12-15

This paper addresses how Distributed Generation (DG), particularly when configured in Combined Heat and Power (CHP) mode, can become a powerful reliability solution in highlight automated factories, especially when integrated with complimentary Power Quality (PQ) measures. The paper presents results from the PQ audit conducted at a highly automated plant over last year. It was found that the main problems for the equipment installed were voltage sags. Among all categories of electrical disturbances, the voltage sag (dip) and momentary interruption are the nemeses of the automated industrial process. The paper analyzes the capabilities of modern electronic power supplies and the convenience of embedded solution. Finally it is addressed the role of the DG/CHP on the reliability of digital factories. (author)

Problem-based learning for technical students on the base TRIZ (theory of inventive problem solving

Directory of Open Access Journals (Sweden)

Babenko Oksana

2016-01-01

Full Text Available The basis of modern educational technology in teaching is problem-based learning through the use of educational technologies Powerful Thinking - Theory of Inventive Problem Solving (TRIZ, including a systematic approach to the complex organization of independent work of search and research character. Developed by systemic administration of the physical features workshops on the basis TRIZ in the cycle of the natural sciences with the implementation of all aspects of the educational activities - substantive, procedural and motivational. A new model of the physical design of the workshop and its form of organization, which is based on problem-based learning with the use of TRIZ Interactive form of organization of the workshop allows you to get high-quality substantive and personality of the students who have a significant role in the formation of professional competencies and affect the quality of produce practice-oriented specialists.

Quality assurance and quality control

International Nuclear Information System (INIS)

Anon.

1987-01-01

The practice of nuclear diagnostic imaging requires an appropriate quality assurance program to attain high standards of efficiency and reliability. The International Atomic Energy Agency defines the term quality assurance as ''the closeness with which the outcome of a given procedure approaches some ideal, free from all errors and artifacts.'' The term quality control is used in reference to the specific measures taken to ensure that one particular aspect of the procedure is satisfactory. Therefore, quality assurance is a hospital-wide concept that should involve all aspects of clinical practice. Quality control is concerned with the submission of requests for procedures; the scheduling of patients; the preparation and dispensing of radiopharmaceuticals; the protection of patients, staff, and the general public against radiation hazards and accidents caused by radioactive materials or by faulty equipment; the setting up, use, and maintenance of electronic instruments; the methodology of the actual procedures; the analysis and interpretation of data; the reporting of results; and, finally, the keeping of records. The chapter discusses each of these areas

Quality Assurance of technitium-labelled radiopharmaceuticals in the Radiation and Isotopes Centre of Khartoum (RICK)

International Nuclear Information System (INIS)

Adlan, A.A.

2005-09-01

This descriptive, exploratory study was conducted in the nuclear medicine department at the Radiation and Isotopes Center of Khartoum (RICK) during 2003-2005 the aim of the study was explore and define the dimensions of a problem which was regarded as urgent by the people working in the field of nuclear medicine in Sudan. The problem concerned the quality of technitium-labelled radiopharmaceuticals which are used in more than 90% of the nuclear medicine imaging studies performed in nuclear medicine. Impure 9 ''9''m Tc-labelled radiopharmaceuticals may create problems, and could lead to false diagnosis. These agents must be tested for determination of the levels of radionuclides, radiochemical and chemicals, before administration to patients. They should also be sterile and pyrogen-free. A number of data collection methods, were used by the researcher for adequate exploration of the dimensions of the problem including interviews, questionnaires and close observations to all activities related to the preparation of radiopharmaceuticals in the hot laboratory. Information concerning all the aspects of quality assurance were collected. These aspects were management and organisation of the work, equipment and tools, knowledge and practical experience of the staff members and methods of preparation and administration of the radioactive agents. Data from different sources were then compared with observation results for more validation and finally lead to the following results: All the quality control tests were not normally performed in the department, therefore the levels of impurities in these agents were not exactly determined, moreover these preparations were subject to contamination with microorganisms, due to low level of cleanliness at the work area. The study detected a number of defaults which were likely to be the causes behind these problems. These were, bad management and organisation, in availability of equipment, tools and materials necessary for testing

Make or buy analysis model based on tolerance allocation to minimize manufacturing cost and fuzzy quality loss

Science.gov (United States)

Rosyidi, C. N.; Puspitoingrum, W.; Jauhari, W. A.; Suhardi, B.; Hamada, K.

2016-02-01

The specification of tolerances has a significant impact on the quality of product and final production cost. The company should carefully pay attention to the component or product tolerance so they can produce a good quality product at the lowest cost. Tolerance allocation has been widely used to solve problem in selecting particular process or supplier. But before merely getting into the selection process, the company must first make a plan to analyse whether the component must be made in house (make), to be purchased from a supplier (buy), or used the combination of both. This paper discusses an optimization model of process and supplier selection in order to minimize the manufacturing costs and the fuzzy quality loss. This model can also be used to determine the allocation of components to the selected processes or suppliers. Tolerance, process capability and production capacity are three important constraints that affect the decision. Fuzzy quality loss function is used in this paper to describe the semantic of the quality, in which the product quality level is divided into several grades. The implementation of the proposed model has been demonstrated by solving a numerical example problem that used a simple assembly product which consists of three components. The metaheuristic approach were implemented to OptQuest software from Oracle Crystal Ball in order to obtain the optimal solution of the numerical example.

[Evolution of a quality assurance programme for physiotherapy schools - results of the first quality inspections].

Science.gov (United States)

Kainz, B; Schlag, B; Jäckel, W H

2004-02-01

In cooperation with the Hochrhein-Institute for Research in Rehabilitation (HRI), the Association for Assuring the Quality of Education in Physiotherapy Schools in Germany (ISQ) has developed a quality assurance programme for physiotherapy schools. It aims at assessing the quality of physiotherapy schools in Germany, and to award a quality seal based on compliance with defined criteria. First, a catalogue of quality features and criteria relevant for education in physiotherapy was developed. It is based on the analysis of questionnaires that had been sent to all German physiotherapy schools, to selected physiotherapists and leading physiotherapists in hospitals, to competent federal authorities, and to three school-classes with group discussions. The persons addressed named 360 different quality features. They were collected in a catalogue, revised in a multi-stage Delphi procedure, and approved consensually. The final criteria were transformed into basic quality requirements, and formulated as a check-list. Assessment of the quality features is carried out by trained visitors. In addition, the satisfaction of students is assessed with a questionnaire. The results of the interviews and the questionnaires are fed back to the schools in a quality report. Schools meeting all basic quality requirements are awarded the seal of quality. The seal is valid for three years. Since January 2003, this procedure is available for all schools in Germany. Until September 2002, a pretest of visitations and student questionnaires had been carried out with 31 member schools of the ISQ; according to the resulting quality reports, none of these schools would instantly be awarded the quality seal. In all, more than half of the schools do not meet 10 of the 42 basic criteria. Fundamental deficiencies have been found in the documentation pertaining to supervision of practical training. In terms of training, further training and professional development of their teachers and associated

Quality control of radiopharmaceuticals

International Nuclear Information System (INIS)

Kristensen, K.

1981-01-01

Quality assurance was introduced in the pharmaceutical field long before it was used in many other areas, and the term quality control has been used in a much broader sense than merely analytical quality control. The term Good Manufacturing Practice (GMP) has been used to describe the system used for producing safe and effective drugs of a uniform quality. GMP has also been used for the industrial production of radiopharmaceuticals. For the preparation and control of radiopharmaceuticals in hospitals a similar system has been named Good Radiopharmacy Practice (GRP). It contains the same elements as GMP but takes into account the special nature of this group of drugs. Data on the assessment of the quality of radiopharmaceuticals in relation to present standards are reviewed. The general conclusion is that the quality of radiopharmaceuticals appears comparable to that of other drugs. It seems possible to establish the production of radiopharmaceuticals, generators and preparation kits in such a way that analytical control of the final product at the hospital may be limited provided the final preparation work is carried out in accordance with GRP principles. The elements of GRP are reviewed. (author)

Sensitivity analysis in optimization and reliability problems

International Nuclear Information System (INIS)

Castillo, Enrique; Minguez, Roberto; Castillo, Carmen

2008-01-01

The paper starts giving the main results that allow a sensitivity analysis to be performed in a general optimization problem, including sensitivities of the objective function, the primal and the dual variables with respect to data. In particular, general results are given for non-linear programming, and closed formulas for linear programming problems are supplied. Next, the methods are applied to a collection of civil engineering reliability problems, which includes a bridge crane, a retaining wall and a composite breakwater. Finally, the sensitivity analysis formulas are extended to calculus of variations problems and a slope stability problem is used to illustrate the methods

Sensitivity analysis in optimization and reliability problems

Energy Technology Data Exchange (ETDEWEB)

Castillo, Enrique [Department of Applied Mathematics and Computational Sciences, University of Cantabria, Avda. Castros s/n., 39005 Santander (Spain)], E-mail: castie@unican.es; Minguez, Roberto [Department of Applied Mathematics, University of Castilla-La Mancha, 13071 Ciudad Real (Spain)], E-mail: roberto.minguez@uclm.es; Castillo, Carmen [Department of Civil Engineering, University of Castilla-La Mancha, 13071 Ciudad Real (Spain)], E-mail: mariacarmen.castillo@uclm.es

2008-12-15

The paper starts giving the main results that allow a sensitivity analysis to be performed in a general optimization problem, including sensitivities of the objective function, the primal and the dual variables with respect to data. In particular, general results are given for non-linear programming, and closed formulas for linear programming problems are supplied. Next, the methods are applied to a collection of civil engineering reliability problems, which includes a bridge crane, a retaining wall and a composite breakwater. Finally, the sensitivity analysis formulas are extended to calculus of variations problems and a slope stability problem is used to illustrate the methods.

Quality Tools and TRIZ Based Quality Improvement Case Study at PT ‘X’ A Plastic Moulding Manufacturing Industry

Science.gov (United States)

Wirawan, Christina; Chandra, Fory

2016-02-01

Theory of Inventive Problem Solving (TRIZ) is a creative encouraging problem solving method. TRIZ is prepared by Altshuller for product design. Altshuller prepared contradiction matrix and suggestion to solve contradictions usually occur in product design. This paper try to combine TRIZ with quality tools such as Pareto and Fault Tree Analysis (FTA) to solve contradiction in quality improvement problem, neither than product design problem. Pareto used to identify defect priority, FTA used to analysis and identify root cause of defect. When there is contradiction in solving defect causes, TRIZ used to find creative problem solving. As a case study, PT ’X’, a plastic molding manufacturing industry was taken. PT ‘X’ using traditional press machine to produce plastic thread cone. There are 5 defect types that might occur in plastic thread cone production, incomplete form, dirty, mottle, excessive form, rugged. Research about quality improvement effort using DMAIC at PT ‘X’ have been done by Fory Candra. From this research, defect types, priority, root cause from FTA, recommendation from FMEA. In this research, from FTA reviewed, contradictions found among causes troublesome quality improvement efforts. TRIZ used to solve the contradictions and quality improvement effort can be made effectively.

Summary of Documentation for DYNA3D-ParaDyn's Software Quality Assurance Regression Test Problems

Energy Technology Data Exchange (ETDEWEB)

Zywicz, Edward [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-08-18

The Software Quality Assurance (SQA) regression test suite for DYNA3D (Zywicz and Lin, 2015) and ParaDyn (DeGroot, et al., 2015) currently contains approximately 600 problems divided into 21 suites, and is a required component of ParaDyn’s SQA plan (Ferencz and Oliver, 2013). The regression suite allows developers to ensure that software modifications do not unintentionally alter the code response. The entire regression suite is run prior to permanently incorporating any software modification or addition. When code modifications alter test problem results, the specific cause must be determined and fully understood before the software changes and revised test answers can be incorporated. The regression suite is executed on LLNL platforms using a Python script and an associated data file. The user specifies the DYNA3D or ParaDyn executable, number of processors to use, test problems to run, and other options to the script. The data file details how each problem and its answer extraction scripts are executed. For each problem in the regression suite there exists an input deck, an eight-processor partition file, an answer file, and various extraction scripts. These scripts assemble a temporary answer file in a specific format from the simulation results. The temporary and stored answer files are compared to a specific level of numerical precision, and when differences are detected the test problem is flagged as failed. Presently, numerical results are stored and compared to 16 digits. At this accuracy level different processor types, compilers, number of partitions, etc. impact the results to various degrees. Thus, for consistency purposes the regression suite is run with ParaDyn using 8 processors on machines with a specific processor type (currently the Intel Xeon E5530 processor). For non-parallel regression problems, i.e., the two XFEM problems, DYNA3D is used instead. When environments or platforms change, executables using the current source code and the new

Quality of Industry Support to NPP Krsko

International Nuclear Information System (INIS)

Nemcic, K.

2008-01-01

NPP Krsko developed program for Supplier evaluation and performance. During the regular control of suppliers and evaluation of industry support to NPP Krsko quality problems were reported. Different quality systems were evaluated and different suppliers as: design organizations, equipment manufacturers, material vendors were audited or surveillance was performed. This paper discuss and report various cases where quality issues were problems based on audit results and present actions and efforts undertaken by the NE Krsko Quality Assurance Department to improve performance of the contractors, vendors, suppliers. New and different quality standards as approach in numerous articles are described as improvement or quality changes but also 'different opinion exist'. This paper also presents the author view and approach how to solve the possible future problems with different quality systems and organisations used by industry who support daily operation of NE Krsko and give recommendations for future nuclear projects.(author)

Video Quality Prediction over Wireless 4G

KAUST Repository

Lau, Chun Pong

2013-04-14

In this paper, we study the problem of video quality prediction over the wireless 4G network. Video transmission data is collected from a real 4G SCM testbed for investigating factors that affect video quality. After feature transformation and selection on video and network parameters, video quality is predicted by solving as regression problem. Experimental results show that the dominated factor on video quality is the channel attenuation and video quality can be well estimated by our models with small errors.

Video Quality Prediction over Wireless 4G

KAUST Repository

Lau, Chun Pong; Zhang, Xiangliang; Shihada, Basem

2013-01-01

In this paper, we study the problem of video quality prediction over the wireless 4G network. Video transmission data is collected from a real 4G SCM testbed for investigating factors that affect video quality. After feature transformation and selection on video and network parameters, video quality is predicted by solving as regression problem. Experimental results show that the dominated factor on video quality is the channel attenuation and video quality can be well estimated by our models with small errors.

Investigating the problems associated with interior air quality of bedroms in boarding schools and developing a new system

Directory of Open Access Journals (Sweden)

Mustafa Ertürk

2017-10-01

Full Text Available The problems associated with interior air quality in the dormitory of a vocational and technical training center that consist of six bedrooms with a capacity of sixty students are studied for December of 2016. Measurements are carried out with 11 Testo 535 CO2 measuring instruments, two and nine of which are used for exterior and interior air, respectively. The outdoor CO2 measurements are made in the garden and in front of open window situated at the second floor of the building. The data received from other nine measuring instruments placed at five different locations where the students are mostly present are recorded continuously and averaged manually. These measurements are conducted for seven different hours of four different days on December (1500, 1600, 1800, 2000, 2200, 0000, 0300, 0630. According to results obtained at 1500, it is found that the amount of CO2 level in rooms is measured to 1100 ppm, which is under the permitted amount of level. Students begin to enter the bedrooms from 1800, the amount of CO2 increase staidly to up to 2000. The free time of students from 930 to 2200 increases the amount of CO2 and continues until 0600 in the morning due to their increased activities in this period of times. To solve the problem associated with interior air quality of this dormitory, a novel system which controls the interior air quality continuously and keeps it stabile is developed. In this newly developed system, it is aimed to keep the amount of CO2 at 1100 ppm level by transferring the data collected from CO2 sensors in bedrooms to ABB brand driver, and designing a variable air flow system that controls the fresh air and exhaust fans. This system is also expected to constantly stabilize the blown air temperature at 25 °C by activating the electric resistances present in the air channel according to the load, when the outside air temperature drops below 20 °C.

Uncertain Quality Function Deployment Using a Hybrid Group Decision Making Model

Directory of Open Access Journals (Sweden)

Ze-Ling Wang

2016-11-01

Full Text Available Quality function deployment (QFD is a widely used quality system tool for translating customer requirements (CRs into the engineering design requirements (DRs of products or services. The conventional QFD analysis, however, has been criticized as having some limitations such as in the assessment of relationships between CRs and DRs, the determination of CR weights and the prioritization of DRs. This paper aims to develop a new hybrid group decision-making model based on hesitant 2-tuple linguistic term sets and an extended QUALIFLEX (qualitative flexible multiple criteria method approach for handling QFD problems with incomplete weight information. First, hesitant linguistic term sets are combined with interval 2-tuple linguistic variables to express various uncertainties in the assessment information of QFD team members. Borrowing the idea of grey relational analysis (GRA, a multiple objective optimization model is constructed to determine the relative weights of CRs. Then, an extended QUALIFLEX approach with an inclusion comparison method is suggested to determine the ranking of the DRs identified in QFD. Finally, an analysis of a market segment selection problem is conducted to demonstrate and validate the proposed QFD approach.

Quality management in industry

International Nuclear Information System (INIS)

Saegesser, R.

1992-01-01

Using the example of the introduction of quality management in industry, the procedure in the Sulzer Concern is described. After an historical review, the principles of quality management drawn up at Sulzer, their implementation, the training from top to bottom and quality assurance used as an instrument of quality management are described. Supporting measures and the periphery are also mentioned. Finally, the initial experience gained from this introduction, which is not yet complete, is presented. 4 figs

Quality and Quality Assurance in Ethiopian Higher Education. Critical Issues and Practical Implications.

NARCIS (Netherlands)

Kahsay, M.

2012-01-01

This book critically examines quality and quality assurance in the Ethiopian higher education context. More specifically, the main research problem that guided the study was: ‘how and under what circumstances do the public Universities in Ethiopia assure quality of their education, and what

Drawing a baseline in aesthetic quality assessment

Science.gov (United States)

Rubio, Fernando; Flores, M. Julia; Puerta, Jose M.

2018-04-01

Aesthetic classification of images is an inherently subjective task. There does not exist a validated collection of images/photographs labeled as having good or bad quality from experts. Nowadays, the closest approximation to that is to use databases of photos where a group of users rate each image. Hence, there is not a unique good/bad label but a rating distribution given by users voting. Due to this peculiarity, it is not possible to state the problem of binary aesthetic supervised classification in such a direct mode as other Computer Vision tasks. Recent literature follows an approach where researchers utilize the average rates from the users for each image, and they establish an arbitrary threshold to determine their class or label. In this way, images above the threshold are considered of good quality, while images below the threshold are seen as bad quality. This paper analyzes current literature, and it reviews those attributes able to represent an image, differentiating into three families: specific, general and deep features. Among those which have been proved more competitive, we have selected a representative subset, being our main goal to establish a clear experimental framework. Finally, once features were selected, we have used them for the full AVA dataset. We have to remark that to perform validation we report not only accuracy values, which is not that informative in this case, but also, metrics able to evaluate classification power within imbalanced datasets. We have conducted a series of experiments so that distinct well-known classifiers are learned from data. Like that, this paper provides what we could consider valuable and valid baseline results for the given problem.

Quality control and quality standards for the production of bone allografts in China

International Nuclear Information System (INIS)

Sun Shiquan; Li Youchen

1999-01-01

There is a rapid progress of tissue banking especially Bone Banking in China, In order to strengthen the control on medical devices, Ministry of Public Health (MPH) issued the 'Regulation on Supervision of Critical Medical Devices, MPH Decree No. 54' in 1997. The SPTB was requested to submit new application for the approval of production and providing of tissue allografts. The needed documents are clinical reports, package insert, quality standards of product, Quality System Regulation (QSR) and audit report. Quality System Regulation document adopted the GMP standard for medical devices of FDA, US (21 CFR 620-1997). SPTB will amend the existed Quality Manual to suit the requirement of QSR. Referring to the AATB Standards, SPTB established 'Technical Standards' for Tissue Banking and was approved by the local government, which will be the supplement of the submitted QSR document. Considering the need of market control, MPH requested to submit a 'Quality Standard of Product' and the method of inspection. SPTB has completed such standards for final inspection of bone products, which includes the test for residual water, microbiology, bone species, colour and structure. In addition, the Tissue Bank has completed standards for in process inspection, which includes residual blood, radiation sterilization, initial bioburden, package leakage and biomechanics. In-process inspection is important for the control of non-conforming final products to assure the safety and efficacy of bone grafts. Methods of in process inspection and final inspection are described and discussed in this paper

Association of problem behavior with sleep problems and gastroesophageal reflux symptoms.

Science.gov (United States)

Sakaguchi, Katsuyoshi; Yagi, Takakazu; Maeda, Aya; Nagayama, Kunihiro; Uehara, Sawako; Saito-Sakoguchi, Yoko; Kanematsu, Kyoko; Miyawaki, Shouichi

2014-02-01

There are few large-scale epidemiologic studies examining the associations between sleep problems, gastroesophageal reflux disease (GERD) symptoms, lifestyle and food habits and problem behaviors (PB) in adolescents. The aim of this study was to evaluate the associations among these factors in Japanese adolescents. A cross-sectional survey of 1840 junior high school students was carried out using questionnaires. The subjects were classified into PB or normal behavior (NB) groups using the Pediatric Symptom Checklist (PSC). The scores of the sleep-related factors, sleep bruxism, lifestyle and food habits, and GERD symptoms were compared. Logistic regression analysis was used to determine the factors related to PB. Mean subject age was 13.3 ± 1.8 years. The PB group had significantly longer sleep latency and higher GERD symptom score (P sleep bruxism, difficulty falling asleep within 30 min, nightmares, feeling of low sleep quality, daytime somnolence, and daytime lack of motivation. Feelings of low sleep quality had the strongest association with PB, with an adjusted odds ratio of 12.88 (95% confidence interval: 8.99-18.46). PB in adolescents are associated with sleep problems, including sleep bruxism, as well as lifestyle and food habits and GERD symptoms. © 2013 The Authors. Pediatrics International © 2013 Japan Pediatric Society.

Quality of Control of Clinical-Biochemical Laboratories – Serbian Case

Directory of Open Access Journals (Sweden)

Vinko Peric

2014-06-01

Full Text Available In the last 20 years in medical laboratories, numerous activities regarding quality and accreditation system were taken. Approach to this problem in European countries is different, so the task of the Accreditation Work Group of the Confederation of European societies for clinical chemistry (EC 4 to help the efforts to harmonize this issue. External quality control in clinical-chemical laboratories imposed the need for the implementation of quality management system. »Good laboratory practice« and its principles were adopted by nominated bodies, both international and national. In the beginning, the standard ISO 9001 was applied for certification and for accreditation EN 45001 and ISO Guide 25, which are prepared for testing and calibration laboratories. Standard ISO 17025 is the successor of the previous documents and for now it is a reference for mentioned laboratories. Accreditation Work Group of the Confederation of European societies for clinical chemistry (EC 4 made an amendment of the requirements for medical laboratories, which this standard describes. Standard draft ISO 15189 was adopted on February 2003 as a final version with requirements for medical laboratories.

Data quality system using reference dictionaries and edit distance algorithms

Science.gov (United States)

Karbarz, Radosław; Mulawka, Jan

2015-09-01

The real art of management it is important to make smart decisions, what in most of the cases is not a trivial task. Those decisions may lead to determination of production level, funds allocation for investments etc. Most of the parameters in decision-making process such as: interest rate, goods value or exchange rate may change. It is well know that these parameters in the decision-making are based on the data contained in datamarts or data warehouse. However, if the information derived from the processed data sets is the basis for the most important management decisions, it is required that the data is accurate, complete and current. In order to achieve high quality data and to gain from them measurable business benefits, data quality system should be used. The article describes the approach to the problem, shows the algorithms in details and their usage. Finally the test results are provide. Test results show the best algorithms (in terms of quality and quantity) for different parameters and data distribution.

An adaptive framework to differentiate receiving water quality impacts on a multi-scale level.

Science.gov (United States)

Blumensaat, F; Tränckner, J; Helm, B; Kroll, S; Dirckx, G; Krebs, P

2013-01-01

The paradigm shift in recent years towards sustainable and coherent water resources management on a river basin scale has changed the subject of investigations to a multi-scale problem representing a great challenge for all actors participating in the management process. In this regard, planning engineers often face an inherent conflict to provide reliable decision support for complex questions with a minimum of effort. This trend inevitably increases the risk to base decisions upon uncertain and unverified conclusions. This paper proposes an adaptive framework for integral planning that combines several concepts (flow balancing, water quality monitoring, process modelling, multi-objective assessment) to systematically evaluate management strategies for water quality improvement. As key element, an S/P matrix is introduced to structure the differentiation of relevant 'pressures' in affected regions, i.e. 'spatial units', which helps in handling complexity. The framework is applied to a small, but typical, catchment in Flanders, Belgium. The application to the real-life case shows: (1) the proposed approach is adaptive, covers problems of different spatial and temporal scale, efficiently reduces complexity and finally leads to a transparent solution; and (2) water quality and emission-based performance evaluation must be done jointly as an emission-based performance improvement does not necessarily lead to an improved water quality status, and an assessment solely focusing on water quality criteria may mask non-compliance with emission-based standards. Recommendations derived from the theoretical analysis have been put into practice.

Quality management

International Nuclear Information System (INIS)

1989-01-01

The 1989 Quality Management Conference focusses on process control and the thus achievable product quality. It is shown that the buyers' increasing demands on product quality require appropriate response in terms of enhanced efforts and methods for quality assurance in the production process. The connection between quality targets and the expenditure required is shown, as well as a comparative validation of efficiency of quality assurance methods. The firms selected for representation at this conference cover a wide range of products so that practically the entire scope of process control problems in the various industrial branches is discussed in the conference contributions. The last conference session is concerned with the strategies and technical developments for enhanced combination of quality assurance and control and production processes. (orig./HP) [de

Relationship between Problem-Solving Ability and Career Maturity ...

African Journals Online (AJOL)

This study investigated the relationship between problem-solving ability and career maturity of secondary school students in Ibadan, Oyo State, Nigeria. 230 final year secondary school students completed self-report measures of problem solving and career maturity. Multiple regression analysis was used to analyse the data ...

Improving data quality in the linked open data: a survey

Science.gov (United States)

Hadhiatma, A.

2018-03-01

The Linked Open Data (LOD) is “web of data”, a different paradigm from “web of document” commonly used today. However, the huge LOD still suffers from data quality problems such as completeness, consistency, and accuracy. Data quality problems relate to designing effective methods both to manage and to retrieve information at various data quality levels. Based on review from papers and journals, addressing data quality requires some standards functioning to (1) identification of data quality problems, (2) assessment of data quality for a given context, and (3) correction of data quality problems. However, mostly the methods and strategies dealing with the LOD data quality were not as an integrative approach. Hence, based on those standards and an integrative approach, there are opportunities to improve the LOD data quality in the term of incompleteness, inaccuracy and inconsistency, considering to its schema and ontology, namely ontology refinement. Moreover, the term of the ontology refinement means that it copes not only to improve data quality but also to enrich the LOD. Therefore, it needs (1) a standard for data quality assessment and evaluation which is more appropriate to the LOD; (2) a framework of methods based on statistical relational learning that can improve the correction of data quality problems as well as enrich the LOD.

Decision theory on the quality evaluation of medical images; A teoria da decisao na avaliacao da qualidade da imagem medica

Energy Technology Data Exchange (ETDEWEB)

Lessa, Patricia Silva

2001-10-01

The problem of quality has been a constant issue in every organization.One is always seeking to produce more, to do it at a lower cost, and to do it with better quality. However, in this country, there is no radiographic film quality control system for radiographic services. The tittle that actually gets done is essentially ad hoc and superficial. The implications of this gap, along with some other shortcomings that exist in process as a whole (the state of the x-ray equipment, the adequate to use in order to obtain a radiography, the quality of the film, the processing of the film, the brightness and homogeneity of the viewing boxes, the ability of the radiologist), have a very negative impact on the quality of the medical image, and, as result, to the quality of the medical diagnosis and therapy. It frequently happens that many radiographs have to be repeated, which leads to an increase of the patient's exposure to radiation, as well as of the cost of the procedure for the patient. Low quality radiographs that are not repeated greatly increase the probability of a wrong diagnosis, and consequently, of inadequate therapeutical procedures, thus producing increased incidence of bad outcomes and higher costs. The paradigm proposed in order to establish a system for the measurement of the image's quality is Decision Theory. The problem of the assessment of the image is studied by proposing a Decision Theory approach. The review of the literature reveals a great concern with the quality of the image, along with an absence of an adequate paradigm and several essentially empirical procedures. Image parameters are developed in order to formalize the problem in terms of Decision Theory, and various aspects of image digitalisation are exposed. Finally, a solution is presented, including a protocol for quality control. (author)

Product Quality Modelling Based on Incremental Support Vector Machine

International Nuclear Information System (INIS)

Wang, J; Zhang, W; Qin, B; Shi, W

2012-01-01

Incremental Support vector machine (ISVM) is a new learning method developed in recent years based on the foundations of statistical learning theory. It is suitable for the problem of sequentially arriving field data and has been widely used for product quality prediction and production process optimization. However, the traditional ISVM learning does not consider the quality of the incremental data which may contain noise and redundant data; it will affect the learning speed and accuracy to a great extent. In order to improve SVM training speed and accuracy, a modified incremental support vector machine (MISVM) is proposed in this paper. Firstly, the margin vectors are extracted according to the Karush-Kuhn-Tucker (KKT) condition; then the distance from the margin vectors to the final decision hyperplane is calculated to evaluate the importance of margin vectors, where the margin vectors are removed while their distance exceed the specified value; finally, the original SVs and remaining margin vectors are used to update the SVM. The proposed MISVM can not only eliminate the unimportant samples such as noise samples, but also can preserve the important samples. The MISVM has been experimented on two public data and one field data of zinc coating weight in strip hot-dip galvanizing, and the results shows that the proposed method can improve the prediction accuracy and the training speed effectively. Furthermore, it can provide the necessary decision supports and analysis tools for auto control of product quality, and also can extend to other process industries, such as chemical process and manufacturing process.

Mental Health, School Problems, and Social Networks: Modeling Urban Adolescent Substance Use

Science.gov (United States)

Mason, Michael J.

2010-01-01

This study tested a mediation model of the relationship with school problems, social network quality, and substance use with a primary care sample of 301 urban adolescents. It was theorized that social network quality (level of risk or protection in network) would mediate the effects of school problems, accounting for internalizing problems and…

The problem of final storage of radioactive waste - ethical considerations of the goods and evils

International Nuclear Information System (INIS)

Korff, W.; Feldhaus, S.

1996-01-01

The handling of radioactive remains proves to be separate, by now increasingly dominating problem in the discussion about nuclear energy. The application of the practical and concrete-ethical methodology of deliberation on goods and evils to the problems of permanent disposal, which is systematically expounded in the text, was able to show the following: 1. In the judgement on permanent disposal of nuclear waste we have to do with a prcedural-ethical process of deliberation as well. A morally justifiable and therefore responsible handling of our options has to be carried out in context of the individual, social and ecological requirements of the day as a continuous process of optimisation. Everywhere findable, on principle orientated attitudes of refusal against deliberation don't constitute an adequate solution of the problem. 2. The problems of permanent disposal have to be considered in the all-embracing context of the problems of waste disposal, in that occasion the waste disposal form of reprocessing has to be included into deliberation apart from that one of interim diposal, which is normally placed before permanent disposal. 3. The issue of permanent disposal can be discussed only in the extensive context of nuclear energy use and the problems of its ethical legitimation. 4. The problems of social acceptance of the nuclear energy use, fixed today essentially to the issue of permanent disposal of radioactive remains, cannot be easily equated with the question for its ehtical justification. (orig.) [de

75 FR 63823 - Final Guidance, “Federal Greenhouse Gas Accounting and Reporting”

Science.gov (United States)

2010-10-18

... COUNCIL ON ENVIRONMENTAL QUALITY Final Guidance, ``Federal Greenhouse Gas Accounting and Reporting...''), entitled ``Federal Leadership in Environmental, Energy, and Economic Performance.'' 74 FR 52117, Oct. 8... emissions associated with agency operations. This Final Guidance, ``Federal Greenhouse Gas Accounting and...

2004 Power marketing program final EIS - final environmental impact statement. Volume 2 - appendices

International Nuclear Information System (INIS)

1997-02-01

This volume contains appendices to the Final Environmental Impact Statement (FEIS) for the Power Marketing Program proposal of the Western Area Power Administration. The FEIS identified peaking power scheduling as the environmentally preferred alternative, and presented the analysis of alternatives and environmental impacts. Sixteen appendices to the FEIS are included in this document. The appendices are: Statutory and Legal Framework; Sierra Nevada Region Customer Groups and Economic Regions; Renewable Technology Cost Information Matrix; Hydrological Assumptions; Recreation Resources; Archaeological and Historical Resources; Incremental Power Resources; Air Quality Regulatory Structure; Energy Generation; Stage Contents Relationships for Regulating Reservoirs; Power Costs; Socioeconomic Impacts; Projected Air Resource Impacts; Land use, Water Quality, and Solid Waste Impact Factors; Draft Environmental Impact Statement Comments and Responses, and Contractor Disclosure Statements. 21 figs., 24 tabs

The data quality analyzer: a quality control program for seismic data

Science.gov (United States)

Ringler, Adam; Hagerty, M.T.; Holland, James F.; Gonzales, A.; Gee, Lind S.; Edwards, J.D.; Wilson, David; Baker, Adam

2015-01-01

The U.S. Geological Survey's Albuquerque Seismological Laboratory (ASL) has several initiatives underway to enhance and track the quality of data produced from ASL seismic stations and to improve communication about data problems to the user community. The Data Quality Analyzer (DQA) is one such development and is designed to characterize seismic station data quality in a quantitative and automated manner.

[Analytical quality in biological monitoring of workers exposed to chemicals: experience of the Prevention and Safety at the Workplace Service in Modena].

Science.gov (United States)

Alpaca, R I Paredes; Migliore, A; Di Rico, R; Canali, Claudia; Rota, Cristina; Trenti, T; Cariani, Elisabetta

2010-01-01

The quality of laboratory data is one of the main factors in guaranteeing efficacy of biological monitoring. To analyze the quality of laboratory data used for biological monitoring of exposed workers. A survey involving 18 companies employing 945 workers in the area of Modena, Italy, was carried out in 2008. Most of the 9 private laboratories receiving biological samples did not perform directly part or all of the laboratory assessments requested, but this was not indicated in the final report. Major problems were observed in the application of internal quality control, and only one laboratory participated in external quality assessment for blood lead measurements. Our results raise major concerns on the traceability and reliability of laboratory assessments performed for biomonitoring of exposed workers. Systematic evaluation of the quality of analytical data would be highly recommendable.

Low-quality birds do not display high-quality signals: The cysteine-pheomelanin mechanism of honesty

Science.gov (United States)

Galván, Ismael; Wakamatsu, Kazumasa; Camarero, Pablo R; Mateo, Rafael; Alonso-Alvarez, Carlos

2015-01-01

The mechanisms that make that the costs of producing high-quality signals are unaffordable to low-quality signalers are a current issue in animal communication. The size of the melanin-based bib of male house sparrows Passer domesticus honestly signals quality. We induced the development of new bibs while treating males with buthionine-sulfoximine (BSO), a substance that depletes the levels of the antioxidant glutathione (GSH) and the amino acid cysteine, two elements that switch melanogenesis from eumelanin to pheomelanin. Final bib size is negatively related to pheomelanin levels in the bib feathers. BSO reduced cysteine and GSH levels in all birds, but improved phenotypes (bibs larger than controls) were only expressed by high-quality birds (BSO birds with largest bibs initially). Negative associations between final bib size and cysteine levels in erythrocytes, and between pheomelanin and cysteine levels, were observed in high-quality birds only. These findings suggest that a mechanism uncoupling pheomelanin and cysteine levels may have evolved in low-quality birds to avoid producing bibs of size not corresponding to their quality and greater relative costs. Indeed, greater oxidative stress in cells was not observed in low-quality birds. This may represent the first mechanism maintaining signal honesty without producing greater relative costs on low-quality signalers. PMID:25330349

Food Security Problems in Borabu Division, Nyamira District ...

African Journals Online (AJOL)

Food Security Problems in Borabu Division, Nyamira District. ... Finally, the paper highlights some of the major problems associated with land use for instance, labour shortages, lack of credit facilities, type of farm implements used, overutilization of land, limited extension services, and extinction of indigenous crops. Last but ...

Rumination decreases parental problem-solving effectiveness in dysphoric postnatal mothers.

Science.gov (United States)

O'Mahen, Heather A; Boyd, Alex; Gashe, Caroline

2015-06-01

Postnatal depression is associated with poorer parenting quality, but there are few studies examining maternal-specific cognitive processes that may impact on parenting quality. In this study, we examined the impact of rumination on parental problem-solving effectiveness in dysphoric and non-dysphoric postnatal mothers. Fifty-nine mothers with a infant aged 12 months and under, 20 of whom had a Beck Depression Score II (BDI-II) score ≥ 14, and 39 who scored less than 14 on the BDI-II were randomly assigned to either a rumination or distraction condition. Problem-solving effectiveness was assessed post-induction with the "Postnatal Parental Problem-Solving Task" (PPST), which was adapted from the Means Ends Problem-solving task. Parental problem-solving confidence was also assessed. Dysphoric ruminating mothers exhibited poorer problem-solving effectiveness and poorer confidence regarding their problem-solving compared to dysphoric distracting, non-dysphoric distracting, and non-dysphoric ruminating mothers. A self-report measure of depressed mood was used. Rumination may be a key mechanism associated with both depressive mood and maternal parenting quality during the postnatal period. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Quality Assurance of ARM Program Climate Research Facility Data

Energy Technology Data Exchange (ETDEWEB)

Peppler, RA; Kehoe, KE; Sonntag, KL; Bahrmann, CP; Richardson, SJ; Christensen, SW; McCord, RA; Doty, DJ; Wagener, Richard [BNL; Eagan, RC; Lijegren, JC; Orr, BW; Sisterson, DL; Halter, TD; Keck, NN; Long, CN; Macduff, MC; Mather, JH; Perez, RC; Voyles, JW; Ivey, MD; Moore, ST; Nitschke, DL; Perkins, BD; Turner, DD

2008-03-01

This report documents key aspects of the Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) data quality assurance program as it existed in 2008. The performance of ACRF instruments, sites, and data systems is measured in terms of the availability, usability, and accessibility of the data to a user. First, the data must be available to users; that is, the data must be collected by instrument systems, processed, and delivered to a central repository in a timely manner. Second, the data must be usable; that is, the data must be inspected and deemed of sufficient quality for scientific research purposes, and data users must be able to readily tell where there are known problems in the data. Finally, the data must be accessible; that is, data users must be able to easily find, obtain, and work with the data from the central repository. The processes described in this report include instrument deployment and calibration; instrument and facility maintenance; data collection and processing infrastructure; data stream inspection and assessment; the roles of value-added data processing and field campaigns in specifying data quality and haracterizing the basic measurement; data archival, display, and distribution; data stream reprocessing; and engineering and operations management processes and procedures. Future directions in ACRF data quality assurance also are presented.

Quality Assurance of ARM Program Climate Research Facility Data

International Nuclear Information System (INIS)

Peppler, R.A.; Kehoe, K.E.; Sonntag, K.L.; Bahramann, C.P.; Richardson, S.J.; Christensen, S.W.; McCord, R.A.; Doty, D.J.; Wagener, R.; Eagan, R.C.; Lijegren, J.C.; Orr, B.W.; Sisterson, D.L.; Halter, T.D.; Keck, N.N.; Long, C.N.; Macduff, M.C.; Mather, J.H.; Perez, R.C.; Voyles, J.W.; Ivey, M.D.; Moore, S.T.; Nitschke, D.L.; Perkins, B.D.; Turner, D.D.

2008-01-01

This report documents key aspects of the Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) data quality assurance program as it existed in 2008. The performance of ACRF instruments, sites, and data systems is measured in terms of the availability, usability, and accessibility of the data to a user. First, the data must be available to users; that is, the data must be collected by instrument systems, processed, and delivered to a central repository in a timely manner. Second, the data must be usable; that is, the data must be inspected and deemed of sufficient quality for scientific research purposes, and data users must be able to readily tell where there are known problems in the data. Finally, the data must be accessible; that is, data users must be able to easily find, obtain, and work with the data from the central repository. The processes described in this report include instrument deployment and calibration; instrument and facility maintenance; data collection and processing infrastructure; data stream inspection and assessment; the roles of value-added data processing and field campaigns in specifying data quality and characterizing the basic measurement; data archival, display, and distribution; data stream reprocessing; and engineering and operations management processes and procedures. Future directions in ACRF data quality assurance also are presented

Performance analysis of the partial use of a local optimization operator on the genetic algorithm for the Travelling Salesman Problem

Directory of Open Access Journals (Sweden)

Milan Djordjevic

2012-01-01

Full Text Available Background: The Travelling Salesman Problem is an NP-hard problem in combinatorial optimization with a number of practical implications. There are many heuristic algorithms and exact methods for solving the problem. Objectives: In this paper we study the influence of hybridization of a genetic algorithm with a local optimizer on solving instances of the Travelling Salesman Problem. Methods/ Approach: Our algorithm uses hybridization that occurs at various percentages of generations of a genetic algorithm. Moreover, we have also studied at which generations to apply the hybridization and hence applied it at random generations, at the initial generations, and at the last ones. Results: We tested our algorithm on instances with sizes ranging from 76 to 439 cities. On the one hand, the less frequent application of hybridization decreased the average running time of the algorithm from 14.62 sec to 2.78 sec at 100% and 10% hybridization respectively, while on the other hand, the quality of the solution on average deteriorated only from 0.21% till 1.40% worse than the optimal solution. Conclusions: In the paper we have shown that even a small hybridization substantially improves the quality of the result. Moreover, the hybridization in fact does not deteriorate the running time too much. Finally, our experiments show that the best results are obtained when hybridization occurs in the last generations of the genetic algorithm.

Approximation Algorithm for a Heterogeneous Vehicle Routing Problem

Directory of Open Access Journals (Sweden)

Jungyun Bae

2015-08-01

Full Text Available This article addresses a fundamental path planning problem which aims to route a collection of heterogeneous vehicles such that each target location is visited by some vehicle and the sum of the travel costs of the vehicles is minimal. Vehicles are heterogeneous as the cost of traveling between any two locations depends on the type of the vehicle. Algorithms are developed for this path planning problem with bounds on the quality of the solutions produced by the algorithms. Computational results show that high quality solutions can be obtained for the path planning problem involving four vehicles and 40 targets using the proposed approach.

Impact of Psychological Problems and Marital Adjustment of Iranian Veterans on Their Children's Quality of Life and Happiness

Science.gov (United States)

Zargar, Fatemeh

2014-01-01

Background: The Iran-Iraq war during the 1980-1988 has left many consequences on veterans and their families that persist long after the war ended. Objectives: The aim of this study was to evaluate the impact of psychological problems and marital adjustment of Iranian veterans on their children's quality of life and happiness 24 years after the war ended. Patients and Methods: The sample was all children of veterans in Isfahan city that registered by Veterans and Martyrs Affair Foundation (VMAF). One hundred sixty-three veterans were selected by systematic randomized sampling and the symptom checklist-90-revised (SCL-90-R) and dyadic adjustment scale (DAS) were administered for them. Their wives filled out the DAS and their children answered to World Health Organization Quality of Life-Brief version (WHOQOL-BREF) and Oxford Happiness Inventory (OHI). The data from questionnaires completed by 149 families were analyzed using the multiple regressions analysis. Results: Global Severity Index (GSI) scores of veterans and veteran's age were inversely correlated with the scores of children's quality of life, while marital adjustment of parents and number of rooms in house were positively correlated. Mother's age was inversely correlated with the scores of children's happiness, while marital adjustment of the parents, the number of rooms in their house and the number of children were positively correlated. Conclusions: In veterans' family, psychological health of the veterans and marital adjustment of the parents have a significant relationship with their children's quality of life and happiness. PMID:25599063

Building air quality: A guide for building owners and facility managers

International Nuclear Information System (INIS)

1991-12-01

The guide was intended to help those individuals responsible for air quality control in buildings to prevent indoor air quality problems from developing and resolving such problems quickly should they develop. Background information and guidance on dealing with indoor air quality problems were provided. Specific topics included: factors which affect indoor air quality; sources of indoor air contaminants; heating, ventilation and air conditioning (HVAC) systems; the role of building occupants; effective communication between managers and others involved; developing an indoor air quality (IAQ) profile; managing a building for good IAQ; diagnosing IAQ problems; mitigating IAQ problems, hiring professional assistance to solve an IAQ problem; common IAQ measurements; HVAC systems and IAQ; moisture with resultant mold and mildew conditions; asbestos (1332214); radon (10043922); and resources through which additional information can be obtained. Indoor air quality forms were included which can be modified to meet individual needs

Regulatory impact analysis of the proposed great lakes water quality guidance. Final report

International Nuclear Information System (INIS)

Raucher, R.; Dixon, A.; Trabka, E.

1993-01-01

The Regulatory Impact Analysis provides direction to the Great Lakes States and Tribes on minimum water quality standards and contains numerical water quality criteria for 32 pollutants as well as methodologies for the development of water quality criteria for additional pollutants discharged to these waters. It also provides guidance to the Great Lakes States and Tribes on antidegradation policies and standards and implementation procedures

Acquisition of Single Crystal Growth and Characterization Equipment. Final report

International Nuclear Information System (INIS)

Maple, M. Brian; Zocco, Diego A.

2008-01-01

Final Report for DOE Grant No. DE-FG02-04ER46178 'Acquisition of Single Crystal Growth and Characterization Equipment'. There is growing concern in the condensed matter community that the need for quality crystal growth and materials preparation laboratories is not being met in the United States. It has been suggested that there are too many researchers performing measurements on too few materials. As a result, many user facilities are not being used optimally. The number of proficient crystal growers is too small. In addition, insufficient attention is being paid to the enterprise of finding new and interesting materials, which is the driving force behind much of condensed matter research and, ultimately, technology. While a detailed assessment of this situation is clearly needed, enough evidence of a problem already exists to compel a general consensus that the situation must be addressed promptly. This final report describes the work carried out during the last four years in our group, in which a state-of-the-art single crystal growth and characterization facility was established for the study of novel oxides and intermetallic compounds of rare earth, actinide and transition metal elements. Research emphasis is on the physics of superconducting (SC), magnetic, heavy fermion (HF), non-Fermi liquid (NFL) and other types of strongly correlated electron phenomena in bulk single crystals. Properties of these materials are being studied as a function of concentration of chemical constituents, temperature, pressure, and magnetic field, which provide information about the electronic, lattice, and magnetic excitations at the root of various strongly correlated electron phenomena. Most importantly, the facility makes possible the investigation of material properties that can only be achieved in high quality bulk single crystals, including magnetic and transport phenomena, studies of the effects of disorder, properties in the clean limit, and spectroscopic and scattering

Numerical convergence for a sewage disposal problem

OpenAIRE

Alvarez-Vázquez, L.J.; Martínez, A.; Rodríguez, C.; Vázquez-Méndez, M.E.

2001-01-01

The management of sewage disposal and the design of wastewater treatment systems can be formulated as a constrained pointwise optimal control problem. In this paper we study the convergence of the numerical resolution for the corresponding state system by means of a characteristics Galerkin method. The main difficulty of the problem is due to the existence of Radon measures in the right-hand side of the state system. Finally, we present numerical results for a realistic problem posed in a ria...

A non-standard optimal control problem arising in an economics application

Directory of Open Access Journals (Sweden)

Alan Zinober

2013-04-01

Full Text Available A recent optimal control problem in the area of economics has mathematical properties that do not fall into the standard optimal control problem formulation. In our problem the state value at the final time the state, y(T = z, is free and unknown, and additionally the Lagrangian integrand in the functional is a piecewise constant function of the unknown value y(T. This is not a standard optimal control problem and cannot be solved using Pontryagin's Minimum Principle with the standard boundary conditions at the final time. In the standard problem a free final state y(T yields a necessary boundary condition p(T = 0, where p(t is the costate. Because the integrand is a function of y(T, the new necessary condition is that y(T should be equal to a certain integral that is a continuous function of y(T. We introduce a continuous approximation of the piecewise constant integrand function by using a hyperbolic tangent approach and solve an example using a C++ shooting algorithm with Newton iteration for solving the Two Point Boundary Value Problem (TPBVP. The minimising free value y(T is calculated in an outer loop iteration using the Golden Section or Brent algorithm. Comparative nonlinear programming (NP discrete-time results are also presented.

Quality assurance in ionizing radiation application

International Nuclear Information System (INIS)

Rastkhah; Nasser.

1995-01-01

Quality assurance is a mean for controlling all the activities within an organization which affect the quality of the product or service. A series of international standards have been prepared which incorporate the accumulated knowledge and provide guidance on what activities within an organization should be controlled. A proposal on a quality assurance system to be implemented in ionizing radiation application centers is the primary concern of Atomic Energy Organization of Iran is represented. The Objectives were identification of quality related problems ;Comply with national and international requirements ;Controlling all activities within an organization which affects the quality and assurance of maintaining the quality within organization. In performing protection measures, risk, cost, benefit consideration, cause of problems and the classic solution are summarized in four chapters

Thermal shock problems in a plate

International Nuclear Information System (INIS)

Takeuti, Y.; Furukawa, T.

1981-01-01

The problems considered are coupled dynamic thermoelastic analysis in a plate. First we try to examine a problem of the coupled dynamic thermal stress problem with small time approximation for the finite region. Next, we treatise both effects individually by pursuing rigorous anaylsis without small time approximation. Finally we consider thermal shock problems in a plate against different values of heat transfer coefficient (Biot's number) for the time. In conclusion, for usual materials, the inertia effect may be disregarded in the pure thermal problems in contrast to the coupling effect which brings small lags in the temperature and thermal stress distributions. For the consideration of the maximum thermal stress problems, Manson's uncoupled quasi-static results give enough approximation to the thermal shock problems without significant error from our numerical results. The analysis is developed by the use of Laplace transforms and several useful graphical illustrations are given. (orig./HP)

Introduction to Indoor Air Quality

Science.gov (United States)

... Offices Regional Offices Labs and Research Centers Indoor Air Quality (IAQ) Contact Us Share Introduction to Indoor Air Quality Health Effects Primary Causes Identifying Problems Improving IAQ ...

Quality of Education in Madrasah

OpenAIRE

Ali, Mohammad; Kos, Julie; Lietz, Petra; Nugroho, Dita; Furqon; Zainul, Asmawi; Emilia, Emi

2011-01-01

The 'Quality of Education in Madrasah' (QEM) study aimed to provide high quality research into various dimensions of quality of education in Indonesian Madrasahs. The study focused on final year students in Islamic Junior Secondary Schools (Madrasah Tsanawiyah, MT). One hundred and fifty MTs were sampled from across Indonesia, with equal numbers selected from Java and the East and West of ...

Base problems and territories giving concern

International Nuclear Information System (INIS)

2005-01-01

This article presents three base groups of problems in the area of environment and security: access to natural resources and their quality (water and soil and also forests and biodiversity); existent or potential pollution, cause of which can be industry, regions of burial places of dangerous or radioactive wastes; general problems, as natural disasters, climate changes, ecology policy

A No Reference Image Quality Assessment Metric Based on Visual Perception

Directory of Open Access Journals (Sweden)

Yan Fu

2016-12-01

Full Text Available Nowadays, how to evaluate image quality reasonably is a basic and challenging problem. In view of the present no reference evaluation methods, they cannot reflect the human visual perception of image quality accurately. In this paper, we propose an efficient general-purpose no reference image quality assessment (NRIQA method based on visual perception, and effectively integrates human visual characteristics into the NRIQA fields. First, a novel algorithm for salient region extraction is presented. Two characteristics graphs of texture and edging of the original image are added to the Itti model. Due to the normalized luminance coefficients of natural images obey the generalized Gauss probability distribution, we utilize this characteristic to extract statistical features in the regions of interest (ROI and regions of non-interest respectively. Then, the extracted features are fused to be an input to establish the support vector regression (SVR model. Finally, the IQA model obtained by training is used to predict the quality of the image. Experimental results show that this method has good predictive ability, and the evaluation effect is better than existing classical algorithms. Moreover, the predicted results are more consistent with human subjective perception, which can accurately reflect the human visual perception to image quality.

The Quality of Basic Education as Being of All Human Right

Directory of Open Access Journals (Sweden)

Beatriz de Lima Fernandes Gottardo

2015-12-01

Full Text Available In this article, we address the question basic education as a right of every human being. To do this, we will use empirical data as well as literature review in the national and international levels. First, the article is talking about an ideal model of quality basic education for all, making general contours of the world stage, to specifically enter the state of education in Brazil. We discuss the text a study of the various existing regulatory provisions in Brazil that deal with the need to ensure quality basic education in an inclusive way that meets the different needs of students in different regions of our country, and thus try to find solutions to the problems we face when trying to bring quality education to all. Finally, we will address issues related to guaranteeing the right to education at the international level, pointing out the legal provisions that guarantee this right and approach the principle of human dignity as a means for the realization of this right.

Problems with provision: barriers to drinking water quality and public health in rural Tasmania, Australia.

Science.gov (United States)

Whelan, Jessica J; Willis, Karen

2007-01-01

Access to safe drinking water is essential to human life and wellbeing, and is a key public health issue. However, many communities in rural and regional parts of Australia are unable to access drinking water that meets national standards for protecting human health. The aim of this research was to identify the key issues in and barriers to the provision and management of safe drinking water in rural Tasmania, Australia. Semi-structured interviews were conducted with key local government employees and public health officials responsible for management of drinking water in rural Tasmania. Participants were asked about their core public health duties, regulatory responsibilities, perceptions and management of risk, as well as the key barriers that may be affecting the provision of safe drinking water. This research highlights the effect of rural locality on management and safety of fresh water in protecting public health. The key issues contributing to problems with drinking water provision and quality identified by participants included: poor and inadequate water supply infrastructure; lack of resources and staffing; inadequate catchment monitoring; and the effect of competing land uses, such as forestry, on water supply quality. This research raises issues of inequity in the provision of safe drinking water in rural communities. It highlights not only the increasing need for greater funding by state and commonwealth government for basic services such as drinking water, but also the importance of an holistic and integrated approach to managing drinking water resources in rural Tasmania.

Quality Analysis of Open Street Map Data

Science.gov (United States)

Wang, M.; Li, Q.; Hu, Q.; Zhou, M.

2013-05-01

Crowd sourcing geographic data is an opensource geographic data which is contributed by lots of non-professionals and provided to the public. The typical crowd sourcing geographic data contains GPS track data like OpenStreetMap, collaborative map data like Wikimapia, social websites like Twitter and Facebook, POI signed by Jiepang user and so on. These data will provide canonical geographic information for pubic after treatment. As compared with conventional geographic data collection and update method, the crowd sourcing geographic data from the non-professional has characteristics or advantages of large data volume, high currency, abundance information and low cost and becomes a research hotspot of international geographic information science in the recent years. Large volume crowd sourcing geographic data with high currency provides a new solution for geospatial database updating while it need to solve the quality problem of crowd sourcing geographic data obtained from the non-professionals. In this paper, a quality analysis model for OpenStreetMap crowd sourcing geographic data is proposed. Firstly, a quality analysis framework is designed based on data characteristic analysis of OSM data. Secondly, a quality assessment model for OSM data by three different quality elements: completeness, thematic accuracy and positional accuracy is presented. Finally, take the OSM data of Wuhan for instance, the paper analyses and assesses the quality of OSM data with 2011 version of navigation map for reference. The result shows that the high-level roads and urban traffic network of OSM data has a high positional accuracy and completeness so that these OSM data can be used for updating of urban road network database.

Elementary School Teacher Candidates' Perceptions of Good Problems

Science.gov (United States)

Lee, Ji-Eun; Kim, Kyoung-Tae

2005-01-01

This study describes a classroom action research activity regarding a group of elementary school teacher candidates' perceptions of good mathematics problems. A questionnaire containing 20 problems was given, and the candidates were asked to rate the quality of each problem on a 5-point scale. The results revealed that the majority of the teacher…

Robust Consumption-Investment Problem on Infinite Horizon

Energy Technology Data Exchange (ETDEWEB)

Zawisza, Dariusz, E-mail: dariusz.zawisza@im.uj.edu.pl [Jagiellonian University in Krakow, Institute of Mathematics, Faculty of Mathematics and Computer Science (Poland)

2015-12-15

In our paper we consider an infinite horizon consumption-investment problem under a model misspecification in a general stochastic factor model. We formulate the problem as a stochastic game and finally characterize the saddle point and the value function of that game using an ODE of semilinear type, for which we provide a proof of an existence and uniqueness theorem for its solution. Such equation is interested on its own right, since it generalizes many other equations arising in various infinite horizon optimization problems.

[Quality measurement using administrative data in mandatory quality assurance].

Science.gov (United States)

Heller, Günther; Szecsenyi, Joachim; Willms, Gerald; Broge, Björn

2014-01-01

For several years, the use of administrative data in mandatory quality measurement has been requested by several stakeholders in Germany. Main advantages of using administrative data include the reduction of documentary expenditures and the possibility to perform longitudinal quality analyses across different healthcare units. After a short introduction, a brief overview of the current use of administrative data for mandatory quality assurance as well as current developments is given, which will then be further exemplified by decubital ulcer prophylaxis. By using administrative data coding expenditures in this clinical area could be reduced by nine million data fields. At the same time the population analysed was expanded resulting in a more than tenfold increase in potentially quality-relevant events. Finally, perspectives, further developments, possibilities as well as limits of quality measurement with administrative data are discussed. Copyright © 2014. Published by Elsevier GmbH.