WorldWideScience

Sample records for publicly released version

  1. NESHAP Area-Specific Dose-Release Factors for Potential Onsite Member-of-the-Public Locations at SRS using CAP88-PC Version 4.0

    Energy Technology Data Exchange (ETDEWEB)

    Trimor, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-08-09

    The Environmental Protection Agency (EPA) requires the use of the computer model CAP88-PC to estimate the total effective doses (TED) for demonstrating compliance with 40 CFR 61, Subpart H (EPA 2006), the National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. As such, CAP88 Version 4.0 was used to calculate the receptor dose due to routine atmospheric releases at the Savannah River Site (SRS). For estimation, NESHAP dose-release factors (DRFs) have been supplied to Environmental Compliance and Area Closure Projects (EC&ACP) for many years. DRFs represent the dose to a maximum receptor exposed to 1 Ci of a specified radionuclide being released into the atmosphere. They are periodically updated to include changes in the CAP88 version, input parameter values, site meteorology, and location of the maximally exposed individual (MEI). In this report, the DRFs were calculated for potential radionuclide atmospheric releases from 13 SRS release points. The three potential onsite MEI locations to be evaluated are B-Area, Three Rivers Landfill (TRL), and Savannah River Ecology Lab Conference Center (SRELCC) with TRL’s onsite workers considered as members-of-the-public, and the potential future constructions of dormitories at SRELCC and Barracks at B-Area. Each MEI location was evaluated at a specified compass sector with different area to receptor distances and was conducted for both ground-level and elevated release points. The analysis makes use of area-specific meteorological data (Viner 2014). The resulting DRFs are compared to the 2014 NESHAP offsite MEI DRFs for three operational areas; A-Area, H-Area, and COS for a release rate of 1 Ci of tritium oxide at 0 ft. elevation. CAP88 was executed again using the 2016 NESHAP MEI release rates for 0 and 61 m stack heights to determine the radionuclide dose at TRL from the center-of-site (COS).

  2. MCNP Version 6.2 Release Notes

    Energy Technology Data Exchange (ETDEWEB)

    Werner, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bull, Jeffrey S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Solomon, C. J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McKinney, Gregg Walter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dixon, David A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Martz, Roger Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hughes, Henry G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cox, Lawrence James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zukaitis, Anthony J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Armstrong, J. C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Forster, Robert Arthur [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Casswell, Laura [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-05

    Monte Carlo N-Particle or MCNP® is a general-purpose Monte Carlo radiation-transport code designed to track many particle types over broad ranges of energies. This MCNP Version 6.2 follows the MCNP6.1.1 beta version and has been released in order to provide the radiation transport community with the latest feature developments and bug fixes for MCNP. Since the last release of MCNP major work has been conducted to improve the code base, add features, and provide tools to facilitate ease of use of MCNP version 6.2 as well as the analysis of results. These release notes serve as a general guide for the new/improved physics, source, data, tallies, unstructured mesh, code enhancements and tools. For more detailed information on each of the topics, please refer to the appropriate references or the user manual which can be found at http://mcnp.lanl.gov. This release of MCNP version 6.2 contains 39 new features in addition to 172 bug fixes and code enhancements. There are still some 33 known issues the user should familiarize themselves with (see Appendix).

  3. New Open-Source Version of FLORIS Released | News | NREL

    Science.gov (United States)

    New Open-Source Version of FLORIS Released New Open-Source Version of FLORIS Released January 26 , 2018 National Renewable Energy Laboratory (NREL) researchers recently released an updated open-source simplified and documented. Because of the living, open-source nature of the newly updated utility, NREL

  4. Public information plan. Version 2

    International Nuclear Information System (INIS)

    1993-01-01

    The Public Information Plan is intended to be used in conjunction with the U.S. Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project Public Participation Plan. The Public Participation Pion describes the DOE procedure for involving the public in the decision-making process related to the UMTRA Project during the stages at which public participation is required and solicited. This Public Information Plan describes the department's procedure for communicating with the public about project policies, plans, and activities. Together, these complementary plans describe the DOE public affairs program for the UMTRA Project. This project was authorized by Congress in the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, (Public Law (PL) 95-6041), as amended. The Act provides for a cooperative effort with affected states and Indian tribes for the cleanup of designated abandoned or inactive uranium mill tailings sites, which are located in 10 states, 9 of them west of the Mississippi River. The public has a right to know about proposed government actions and to be heard in the planning of activities that influence their lives. The UMTRA Project is unclassified and the DOE provides accurate information about policy and project activities to interested stakeholders, including the news media, in a timely way. The DOE encourages states and local governments, as well as individuals, to join actively in the decision-making process. This is intended to ensure that the resulting decisions are made with full knowledge of the public's views and that these decisions address the public's concerns to the extent possible within the law. The DOE, through the implementation of the Public Information Plan, keeps the public informed on matters such as health concerns, environmental issues, remedial action construction plans, project costs, and specific site activities

  5. Release Early, Release Often: Predicting Change in Versioned Knowledge Organization Systems on the Web

    OpenAIRE

    Meroño-Peñuela, Albert; Guéret, Christophe; Schlobach, Stefan

    2015-01-01

    The Semantic Web is built on top of Knowledge Organization Systems (KOS) (vocabularies, ontologies, concept schemes) that provide a structured, interoperable and distributed access to Linked Data on the Web. The maintenance of these KOS over time has produced a number of KOS version chains: subsequent unique version identifiers to unique states of a KOS. However, the release of new KOS versions pose challenges to both KOS publishers and users. For publishers, updating a KOS is a knowledge int...

  6. SHAKER Version 0.0/5 Pre-release Notes

    CERN Document Server

    CERN. Geneva

    1993-01-01

    SHAKER V0.0/5 is a pre-release of a simple cocktail central rapidity phase space event generator developed for the simulation of LHC Heavy Ion events. A modified version of JETSET 7.3 (the / LUJETS / common has been enlarged to 50000 particles and the LUEDIT routine has been modified to rearrange the particle weights vectors when called with MEDIT=1) is used to manage the events. All event information is included in / LUJETS / according to Lund conventions [1].

  7. History of the CERN Web Software Public Releases

    CERN Document Server

    Fluckiger, Francois; CERN. Geneva. IT Department

    2016-01-01

    This note is an extended version of the article “Licencing the Web” (http://home.web.cern.ch/topics/birthweb/licensing-web) published by CERN, Nov 2013, in the “Birth of the Web” series of articles (http://home.cern/topics/birth-web). It describes the successive steps of the public release of the CERN Web software, from public domain to open source, and explains their rationale. It provides in annexes historical documents including release announcement and texts of the licences used by CERN and MIT in public software distributions.

  8. EPA Releases Neonicotinoid Assessments for Public Comment

    Science.gov (United States)

    Release of preliminary ecological and human health risk assessments for the neonicotinoid insecticides clothianidin, thiamethoxam, and dinotefuran, and a preliminary ecological risk assessment for imidacloprid, assessing risks to birds,mammals, non-target

  9. Urban Terrain Building Types: Second Edition Public Releasable Version

    Science.gov (United States)

    2012-11-01

    Biographies xv 1. Need 1 2. Goals 2 3. Approach 2 4. Method 3 5. Introduction to Tables 2 Through 6 4 6. An Overview of the UTBT Catalog by...173 xv Authors’ Biographies Richard A. Ellefsen, Ph.D. is a professor...Iran Tehran, Elburz Mountains Israel Haifa, Jerusalem , Tel Aviv Japan Tokyo Macao Macao Malaysia Kuala Lulmpur Philippines Manila Singapore

  10. Soil Moisture Active Passive Mission L4_SM Data Product Assessment (Version 2 Validated Release)

    Science.gov (United States)

    Reichle, Rolf Helmut; De Lannoy, Gabrielle J. M.; Liu, Qing; Ardizzone, Joseph V.; Chen, Fan; Colliander, Andreas; Conaty, Austin; Crow, Wade; Jackson, Thomas; Kimball, John; hide

    2016-01-01

    During the post-launch SMAP calibration and validation (Cal/Val) phase there are two objectives for each science data product team: 1) calibrate, verify, and improve the performance of the science algorithm, and 2) validate the accuracy of the science data product as specified in the science requirements and according to the Cal/Val schedule. This report provides an assessment of the SMAP Level 4 Surface and Root Zone Soil Moisture Passive (L4_SM) product specifically for the product's public Version 2 validated release scheduled for 29 April 2016. The assessment of the Version 2 L4_SM data product includes comparisons of SMAP L4_SM soil moisture estimates with in situ soil moisture observations from core validation sites and sparse networks. The assessment further includes a global evaluation of the internal diagnostics from the ensemble-based data assimilation system that is used to generate the L4_SM product. This evaluation focuses on the statistics of the observation-minus-forecast (O-F) residuals and the analysis increments. Together, the core validation site comparisons and the statistics of the assimilation diagnostics are considered primary validation methodologies for the L4_SM product. Comparisons against in situ measurements from regional-scale sparse networks are considered a secondary validation methodology because such in situ measurements are subject to up-scaling errors from the point-scale to the grid cell scale of the data product. Based on the limited set of core validation sites, the wide geographic range of the sparse network sites, and the global assessment of the assimilation diagnostics, the assessment presented here meets the criteria established by the Committee on Earth Observing Satellites for Stage 2 validation and supports the validated release of the data. An analysis of the time average surface and root zone soil moisture shows that the global pattern of arid and humid regions are captured by the L4_SM estimates. Results from the

  11. Release the power of the public purse

    International Nuclear Information System (INIS)

    Borg, Nils; Blume, Ylva; Thomas, Stefan; Irrek, Wolfgang; Faninger-Lund, Heidrun; Lund, Peter; Pindar, Andrew

    2006-01-01

    This article presents the findings of a European study on energy efficiency in the public sector, entitled 'Public procurement of Energy Saving Technologies in Europe' (PROST), completed in 2003. Energy efficiency in the public sector goes far beyond energy savings and climate protection. Energy efficiency must be seen as a strategy, which deals both with scarce public funds and with profound energy and climate challenges. The gains to be made are substantial. The study assessed the potential for energy and cost savings and the greenhouse gas reductions that are linked to energy efficiency in the European public sector. To the knowledge of the authors, this is the first time such an analysis has been carried out. The study concluded that there are no fundamental legal obstacles that would a priori disable the public sector from procuring energy efficient technologies or applying energy efficiency considerations in its daily building management routines. However, at the level of implementation obstacles can occur. It is therefore of paramount importance that there is sufficient political will and adequate incentive systems at all relevant levels. It appeared to be particularly effective when public procurement is energy-efficiency minded in all its operations and life cycle costing is applied for investments instead of conventional public budgeting procedures. The study demonstrates that consistent and EU-wide application of these principles and instruments can result in rather substantial savings both in terms of energy and in terms of money. With additional annual investments in energy efficiency of 80 million Euro, energy savings in the (EU15) Member States' public sector worth up to 12 billion Euro per year can be achieved. A supplementary analysis was performed for a selection of the new Member States, which indicated that the potential for energy and fiscal savings is substantial in those countries as well

  12. FY17Q4 Ristra project: Release Version 1.0 of a production toolkit

    Energy Technology Data Exchange (ETDEWEB)

    Hungerford, Aimee L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Daniel, David John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-21

    The Next Generation Code project will release Version 1.0 of a production toolkit for multi-physics application development on advanced architectures. Features of this toolkit will include remap and link utilities, control and state manager, setup, visualization and I/O, as well as support for a variety of mesh and particle data representations. Numerical physics packages that operate atop this foundational toolkit will be employed in a multi-physics demonstration problem and released to the community along with results from the demonstration.

  13. Ladtap XL Version 2017: A Spreadsheet For Estimating Dose Resulting From Aqueous Releases

    Energy Technology Data Exchange (ETDEWEB)

    Minter, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jannik, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-15

    LADTAP XL© is an EXCEL© spreadsheet used to estimate dose to offsite individuals and populations resulting from routine and accidental releases of radioactive materials to the Savannah River. LADTAP XL© contains two worksheets: LADTAP and IRRIDOSE. The LADTAP worksheet estimates dose for environmental pathways including external exposure resulting from recreational activities on the Savannah River and internal exposure resulting from ingestion of water, fish, and invertebrates originating from the Savannah River. IRRIDOSE estimates offsite dose to individuals and populations from irrigation of foodstuffs with contaminated water from the Savannah River. In 2004, a complete description of the LADTAP XL© code and an associated user’s manual was documented in LADTAP XL©: A Spreadsheet for Estimating Dose Resulting from Aqueous Release (WSRC-TR-2004-00059) and revised input parameters, dose coefficients, and radionuclide decay constants were incorporated into LADTAP XL© Version 2013 (SRNL-STI-2011-00238). LADTAP XL© Version 2017 is a slight modification to Version 2013 with minor changes made for more user-friendly parameter inputs and organization, updates in the time conversion factors used within the dose calculations, and fixed an issue with the expected time build-up parameter referenced within the population shoreline dose calculations. This manual has been produced to update the code description, verification of the models, and provide an updated user’s manual. LADTAP XL© Version 2017 has been verified by Minter (2017) and is ready for use at the Savannah River Site (SRS).

  14. World Digital Magnetic Anomaly Map version 2 (WDMAM v.2) - released for research and education

    Science.gov (United States)

    CHOI-Dyment, Y.; Lesur, V.; Dyment, J.; Hamoudi, M.; Thebault, E.; Catalan, M.

    2015-12-01

    The World Digital Magnetic Anomaly Map is an international initiative carried out under the auspices of the International Association of Geomagnetism and Aeronomy (IAGA) and the Commission for the Geological Map of the World (CGMW). A first version of the map has been published and distributed eight years ago (WDMAM v1; Korhonen et al., 2007). We have produced a candidate which has been accepted as the second version of this map (WDMAM v2) at the International Union of Geophysics and Geodesy in Prag, in June 2015. On land, we adopted an alternative approach avoiding any unnecessary processing on existing aeromagnetic compilations. When available, we used the original aeromagnetic data. As a result the final compilation remains an acceptable representation of the national and international data grids. Over oceanic areas the marine data have been extended. In areas of insufficient data coverage, a model has been computed based on a modified digital grid of the oceanic lithosphere age, considering plate motions in the determination of magnetization vector directions. This model has been further adjusted to the available data, resulting in a better representation of the anomalies. The final grid will be periodically upgraded. Version 2.0 has been released and is available at wdmam.org to support both research and education projects. Colleagues willing to contribute data for future releases (and become a co-author of the map) should contact any of the authors or Jerome Dyment (chair of the WDMAM Task Force) at jdy@ipgp.fr .

  15. MACCS version 1.5.11.1: A maintenance release of the code

    International Nuclear Information System (INIS)

    Chanin, D.; Foster, J.; Rollstin, J.; Miller, L.

    1993-10-01

    A new version of the MACCS code (version 1.5.11.1) has been developed by Sandia National Laboratories under sponsorship of the US Nuclear Regulatory Commission. MACCS was developed to support evaluations of the off-site consequences from hypothetical severe accidents at commercial power plants. MACCS is the only current public domain code in the US that embodies all of the following modeling capabilities: (1) weather sampling using a year of recorded weather data; (2) mitigative actions such as evacuation, sheltering, relocation, decontamination, and interdiction; (3) economic costs of mitigative actions; (4) cloudshine, groundshine, and inhalation pathways as well as food and water ingestion; (5) calculation of both individual and societal doses to various organs; and (6) calculation of both acute (nonstochastic) and latent (stochastic) health effects and risks of health effects. All of the consequence measures may be fun generated in the form of a complementary cumulative distribution function (CCDF). The current version implements a revised cancer model consistent with recent reports such as BEIR V and ICRP 60. In addition, a number of error corrections and portability enhancements have been implemented. This report describes only the changes made in creating the new version. Users of the code will need to obtain the code's original documentation, NUREG/CR-4691

  16. Preliminary analysis of public dose from CFETR gaseous tritium release

    Energy Technology Data Exchange (ETDEWEB)

    Nie, Baojie [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); University of Science and Technology of China, Hefei, Anhui 230027 (China); Ni, Muyi, E-mail: muyi.ni@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Lian, Chao; Jiang, Jieqiong [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

    2015-02-15

    Highlights: • Present the amounts and limit dose of tritium release to the environment for CFETR. • Perform a preliminary simulation of radiation dose for gaseous tritium release. • Key parameters about soil types, wind speed, stability class, effective release height and age were sensitivity analyzed. • Tritium release amount is recalculated consistently with dose limit in Chinese regulation for CFETR. - Abstract: To demonstrate tritium self-sufficiency and other engineering issues, the scientific conception of Chinese Fusion Engineering Test Reactor (CFETR) has been proposed in China parallel with ITER and before DEMO reactor. Tritium environmental safety for CFETR is an important issue and must be evaluated because of the huge amounts of tritium cycling in reactor. In this work, different tritium release scenarios of CFETR and dose limit regulations in China are introduced. And the public dose is preliminarily analyzed under normal and accidental events. Furthermore, after finishing the sensitivity analysis of key input parameters, the public dose is reevaluated based on extreme parameters. Finally, tritium release amount is recalculated consistently with the dose limit in Chinese regulation for CFETR, which would provide a reference for tritium system design of CFETR.

  17. Modeling Inhalational Tularemia: Deliberate Release and Public Health Response

    Science.gov (United States)

    Hall, Ian M.; Leach, Steve

    2011-01-01

    Two epidemic modeling studies of inhalational tularemia were identified in the published literature, both demonstrating the high number of potential casualties that could result from a deliberate aerosolized release of the causative agent in an urban setting. However, neither study analyzed the natural history of inhalational tularemia nor modeled the relative merits of different mitigation strategies. We first analyzed publicly available human/primate experimental data and reports of naturally acquired inhalational tularemia cases to better understand the epidemiology of the disease. We then simulated an aerosolized release of the causative agent, using airborne dispersion modeling to demonstrate the potential number of casualties and the extent of their spatial distribution. Finally, we developed a public health intervention model that compares 2 mitigation strategies: targeting antibiotics at symptomatic individuals with or without mass distribution of antibiotics to potentially infected individuals. An antibiotic stockpile that is sufficient to capture all areas where symptomatic individuals were infected is likely to save more lives than treating symptomatic individuals alone, providing antibiotics can be distributed rapidly and their uptake is high. However, with smaller stockpiles, a strategy of treating symptomatic individuals alone is likely to save many more lives than additional mass distribution of antibiotics to potentially infected individuals. The spatial distribution of symptomatic individuals is unlikely to coincide exactly with the path of the dispersion cloud if such individuals are infected near their work locations but then seek treatment close to their homes. The optimal mitigation strategy will depend critically on the size of the release relative to the stockpile level and the effectiveness of treatment relative to the speed at which antibiotics can be distributed. PMID:22044315

  18. Big Bang pour le grand public - French version only

    CERN Multimedia

    2004-01-01

    Pour commémorer les 50 ans du CERN et l'année de la physique en 2005, la section de physique de l'Université de Genève ouvre une fois de plus ses portes aux non initiés et organise une série de conférences de vulgarisation scientifique. La première conférence, le 7 décembre prochain aura pour thème le Big-Bang et les observations qui corroborent cette théorie. Le Professeur Georges Meylan, Directeur du Laboratoire d'Astrophysique de l'EPFL, donnera cette conférence destinée à tous les publics. Chacune des conférences débutera par une démonstration de détection de rayons cosmiques dans l'auditoire et l'utilisation de ces signaux venus du fond de l'univers pour créer une ?musique cosmique', en collaboration avec le Professeur Ellberger et Nikolai Mihailov du conservatoire de musique de Genève. Ces processus cosmiques étant aléatoires, chacun de ces concerts sera unique. Les preuves observationnelles du Big Bang par le Professeur Georges Meylan Directeur du Laboratoire d'Astrophysique ...

  19. Nuclear power: Accidental releases - practical guidance for public health action

    International Nuclear Information System (INIS)

    1987-01-01

    The disaster at Chernobyl, USSR, has caused a major crisis of confidence in nuclear safety, and highlighted the need for comprehensive contingency planning for - and emergency response to - such accidents. This report gives practical guidance on how the authorities should deal with an accident in any type of nuclear installation, whether it involves accidental releases to the air or into water. It is based on principles developed in a previous WHO report published in 1984. It summarizes the range of accidents for which plans need to be made to protect the public, the measures to be taken and the levels of dose at which they should be applied. It indicates how to measure the levels of exposure and what are the most likely routes of exposure. It then outlines the problems faced by public health authorities and medical practitioners, and the administrative arrangements that will have to be made. The example used is of a standard pressurized light water reactor of the type currently used for electricity generation, but many of the features will be common to other nuclear installations as well. This report is addressed to those organizations and individuals responsible for public health in the event of a nuclear accident. It will also be of use to those medical practitioners who are not administratively responsible in an accident, but who may need to be aware of the consequences and of the action to be taken in the aftermath of an accident. Coordination is vital between the public health administration and the organizations with direct responsibilities in the event of an accident, and this report is essential reading for them all. 29 refs, 2 figs, 7 tabs

  20. 32 CFR 705.6 - Releasing public information material to the media.

    Science.gov (United States)

    2010-07-01

    ... UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS PUBLIC AFFAIRS REGULATIONS § 705.6 Releasing public... and/or as approved by the Assistant Secretary of Defense (Public Affairs). (i) Overall responsibility for release of information rests with the Assistant Secretary of Defense (Public Affairs). The Chief...

  1. JaxoDraw: A graphical user interface for drawing Feynman diagrams. Version 2.0 release notes

    Science.gov (United States)

    Binosi, D.; Collins, J.; Kaufhold, C.; Theussl, L.

    2009-09-01

    variety of new features and bug fixes. Summary of revisions: Major revisions since the last published user guide were versions 1.1, 1.2 and 1.3 with several minor bug-fix releases in between. Restrictions: To make use of the latex export/preview functionality, a latex style file has to be installed separately. Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Running time: As an interactive program, the running time depends on the complexity of the diagram to be drawn.

  2. 14 CFR 1206.800 - Failure to release records to the public.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Failure to release records to the public. 1206.800 Section 1206.800 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION AVAILABILITY OF AGENCY RECORDS TO MEMBERS OF THE PUBLIC Failure To Release Records to the Public § 1206.800...

  3. Angular power spectrum in publically released ALICE events

    Science.gov (United States)

    Llanes-Estrada, Felipe J.; Muñoz Martinez, Jose L.

    2018-02-01

    We study the particles emitted in the fireball following a Relativistic Heavy Ion Collision with the traditional angular analysis employed in cosmology and earth sciences, producing Mollweide plots of the number and pt distribution of a few actual, publically released ALICE-collaboration events and calculating their angular power spectrum. We also examine the angular spectrum of a simple two-particle correlation. While this may not be the optimal way of analyzing heavy ion data, our intention is to provide a one to one comparison to analysis in cosmology. With the limited statistics at hand, we do not find evidence for acoustic peaks but a decrease of Cl that is reminiscent of viscous attenuation, but subject to a strong effect from the rapidity acceptance which probably dominates (so we also subtract the m = 0 component). As an exercise, we still extract a characteristic Silk damping length (proportional to the square root of the viscosity over entropy density ratio) to illustrate the method. The absence of acoustic-like peaks is also compatible with a crossover from the QGP to the hadron gas (because a surface tension at domain boundaries would effect a restoring force that could have driven acoustic oscillations). Presently we do not understand a depression of the l = 6 multipole strength; perhaps ALICE could reexamine it with full statistics.

  4. CALIFA, the Calar Alto Legacy Integral Field Area survey. IV. Third public data release

    Science.gov (United States)

    Sánchez, S. F.; García-Benito, R.; Zibetti, S.; Walcher, C. J.; Husemann, B.; Mendoza, M. A.; Galbany, L.; Falcón-Barroso, J.; Mast, D.; Aceituno, J.; Aguerri, J. A. L.; Alves, J.; Amorim, A. L.; Ascasibar, Y.; Barrado-Navascues, D.; Barrera-Ballesteros, J.; Bekeraitè, S.; Bland-Hawthorn, J.; Cano Díaz, M.; Cid Fernandes, R.; Cavichia, O.; Cortijo, C.; Dannerbauer, H.; Demleitner, M.; Díaz, A.; Dettmar, R. J.; de Lorenzo-Cáceres, A.; del Olmo, A.; Galazzi, A.; García-Lorenzo, B.; Gil de Paz, A.; González Delgado, R.; Holmes, L.; Iglésias-Páramo, J.; Kehrig, C.; Kelz, A.; Kennicutt, R. C.; Kleemann, B.; Lacerda, E. A. D.; López Fernández, R.; López Sánchez, A. R.; Lyubenova, M.; Marino, R.; Márquez, I.; Mendez-Abreu, J.; Mollá, M.; Monreal-Ibero, A.; Ortega Minakata, R.; Torres-Papaqui, J. P.; Pérez, E.; Rosales-Ortega, F. F.; Roth, M. M.; Sánchez-Blázquez, P.; Schilling, U.; Spekkens, K.; Vale Asari, N.; van den Bosch, R. C. E.; van de Ven, G.; Vilchez, J. M.; Wild, V.; Wisotzki, L.; Yıldırım, A.; Ziegler, B.

    2016-10-01

    This paper describes the third public data release (DR3) of the Calar Alto Legacy Integral Field Area (CALIFA) survey. Science-grade quality data for 667 galaxies are made public, including the 200 galaxies of the second public data release (DR2). Data were obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5 m telescope at the Calar Alto Observatory. Three different spectral setups are available: I) a low-resolution V500 setup covering the wavelength range 3745-7500 Å (4240-7140 Å unvignetted) with a spectral resolution of 6.0 Å (FWHM) for 646 galaxies, II) a medium-resolution V1200 setup covering the wavelength range 3650-4840 Å (3650-4620 Å unvignetted) with a spectral resolution of 2.3 Å (FWHM) for 484 galaxies, and III) the combination of the cubes from both setups (called COMBO) with a spectral resolution of 6.0 Å and a wavelength range between 3700-7500 Å (3700-7140 Å unvignetted) for 446 galaxies. The Main Sample, selected and observed according to the CALIFA survey strategy covers a redshift range between 0.005 and 0.03, spans the color-magnitude diagram and probes a wide range of stellar masses, ionization conditions, and morphological types. The Extension Sample covers several types of galaxies that are rare in the overall galaxy population and are therefore not numerous or absent in the CALIFA Main Sample. All the cubes in the data release were processed using the latest pipeline, which includes improved versions of the calibration frames and an even further improved image reconstruction quality. In total, the third data release contains 1576 datacubes, including ~1.5 million independent spectra. Based on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck-Institut für Astronomie (MPIA) and the Instituto de Astrofísica de Andalucía (CSIC).The spectra are available at http://califa.caha.es/DR3

  5. Validation of the state version of the Self-Statement during Public Speaking Scale.

    Science.gov (United States)

    Osório, Flávia L; Crippa, José Alexandre S; Loureiro, Sonia Regina

    2013-03-01

    To adapt the trait version of the Self Statements during Public Speaking (SSPS) scale to a state version (SSPS-S) and to assess its discriminative validity for use in the Simulated Public Speaking Test (SPST). Subjects with and without social anxiety disorder (n = 45) were assessed while performing the SPST, a clinical-experimental model of anxiety with seven different phases. Alterations in negative self-assessment occurred with significant changes throughout the different phases of the procedure (p = .05). Non-cases presented significantly higher mean values of the SSPS-S in all phases of the procedure than cases (p < .01). Cases assessed themselves in a less positive and more negative manner during the SPST than did non-cases. SSPS-S is adequate for this assessment, especially its negative subscale, and shows good psychometric qualities.

  6. The OCO-2 Version 8 XCO2 Data Product Fall 2017 Release: Description and Preliminary Validation

    Science.gov (United States)

    O'Dell, C.; Eldering, A.; Crisp, D.; Fisher, B.; Gunson, M. R.; Kiel, M.; Mandrake, L.; Taylor, T. L.; Wennberg, P. O.

    2017-12-01

    Since beginning its science mission in September 2014, the Orbiting Carbon Observatory-2 (OCO-2) has provided 1-2 million estimates of the column average carbon dioxide (CO2) dry air mole fraction, XCO2, each month. While the Version-7 (V7) OCO-2 data product is generally of high quality, it includes some notable biases, including low and high biases in the tropical and extratropical oceans, respectively, and biases associated with unscreened clouds and variable topography. Because even small (top-down inversion approaches. We present significant changes introduced in the new Version 8 (V8) XCO2 data product. These changes reflect improvements in instrument calibration, cloud filtering, the retrieval algorithm itself, and post-filtering methods. The most noteworthy change involved the inclusion of an optically-thin, upper-tropospheric/lower stratospheric aerosol type which simulates small aerosol particles high in the atmosphere, such as the Junge Layer and aerosols due to volcanic eruptions. It also mitigates the impact of zero level offsets due to a thin layer of ice that accumulates on the OCO-2 detectors, which actually mimics a small, lofted aerosol particle in the retrieval forward model. We show comparisons of the new XCO2 product to both TCCON and models. Improvements in the V8 screening also provides additional data over tropical oceans, which may enhance coverage in these regions. These data are currently being evaluated. Similarly, the new version 8 data may enable improved coverage at higher latitudes via a renewed focus on the challenging retrievals at higher solar zenith angles and over snow and ice covered surfaces.

  7. EPA Releases Update to Popular School Integrated Pest Management Publication

    Science.gov (United States)

    An updated version reflects recent innovations in school IPM, provides links to new information, and has been redesigned into an easily printable format. It provides an overview of IPM and details the steps a school can follow to establish an IPM program.

  8. Validation of the Chinese version of public attitudes toward epilepsy scale in Mainland China.

    Science.gov (United States)

    Yue, Zongwei; Ma, Chanthia; Lim, Kheng-Seang; Xiao, Bo; Wu, Qian; Shu, Yi; Yue, Zhiping; Wang, Yelan; Feng, Li

    2017-07-01

    Epilepsy is a significant yet seriously underappreciated public health issue in Mainland China. The stigma and discrimination toward people with epilepsy (PWE) and their families are especially severe in China based on cultural misconceptions which cause tremendous psychological, economic and social burdens. It is imperative to formulate a targeted public intervention to eliminate knowledge gaps and correct these misconceptions of epilepsy. However, to date, the essential tools that may drive such an intervention by measuring the public perspective on PWEs is lacking in China. The goal of this study is to test the reliability and validity of a Simplified Chinese version of the "Public Attitude Toward Epilepsy" scale (PATE) in Mainland China which can be used to understand the content and identify the possible sources of stigma to better inform the design and focus of future stigma reduction interventions. The standard procedure of cross-cultural adaptation was used in the translation process. Subjects from different economic and social backgrounds were enrolled by convenience sampling in central China. Exploratory factor analysis and confirmatory factor analysis were used to check the underlying factor structure of the items. Furthermore, Cronbach's alpha was utilized to assess internal consistency. 199 respondents were included in the final analysis. Content validity of this Chinese PATE was assessed to be adequate for assessing public attitudes toward epilepsy among the mainland Chinese. Two factors were extracted from the data by exploratory factor analysis; confirmatory factor analysis further confirmed good consistency of theoretical constructs between the original Public Attitudes Toward Epilepsy scale and our Chinese PATE. Our Chinese PATE presented excellent internal consistency (α=0.853-0.909). This version of the Chinese PATE showed acceptable psychometric properties, indicating that it can be implemented in surveying public attitudes toward epilepsy in

  9. The Systems Biology Markup Language (SBML) Level 3 Package: Qualitative Models, Version 1, Release 1.

    Science.gov (United States)

    Chaouiya, Claudine; Keating, Sarah M; Berenguier, Duncan; Naldi, Aurélien; Thieffry, Denis; van Iersel, Martijn P; Le Novère, Nicolas; Helikar, Tomáš

    2015-09-04

    Quantitative methods for modelling biological networks require an in-depth knowledge of the biochemical reactions and their stoichiometric and kinetic parameters. In many practical cases, this knowledge is missing. This has led to the development of several qualitative modelling methods using information such as, for example, gene expression data coming from functional genomic experiments. The SBML Level 3 Version 1 Core specification does not provide a mechanism for explicitly encoding qualitative models, but it does provide a mechanism for SBML packages to extend the Core specification and add additional syntactical constructs. The SBML Qualitative Models package for SBML Level 3 adds features so that qualitative models can be directly and explicitly encoded. The approach taken in this package is essentially based on the definition of regulatory or influence graphs. The SBML Qualitative Models package defines the structure and syntax necessary to describe qualitative models that associate discrete levels of activities with entity pools and the transitions between states that describe the processes involved. This is particularly suited to logical models (Boolean or multi-valued) and some classes of Petri net models can be encoded with the approach.

  10. Soil Moisture Active Passive Mission L4_C Data Product Assessment (Version 2 Validated Release)

    Science.gov (United States)

    Kimball, John S.; Jones, Lucas A.; Glassy, Joseph; Stavros, E. Natasha; Madani, Nima; Reichle, Rolf H.; Jackson, Thomas; Colliander, Andreas

    2016-01-01

    The SMAP satellite was successfully launched January 31st 2015, and began acquiring Earth observation data following in-orbit sensor calibration. Global data products derived from the SMAP L-band microwave measurements include Level 1 calibrated and geolocated radiometric brightness temperatures, Level 23 surface soil moisture and freezethaw geophysical retrievals mapped to a fixed Earth grid, and model enhanced Level 4 data products for surface to root zone soil moisture and terrestrial carbon (CO2) fluxes. The post-launch SMAP mission CalVal Phase had two primary objectives for each science product team: 1) calibrate, verify, and improve the performance of the science algorithms, and 2) validate accuracies of the science data products as specified in the L1 science requirements. This report provides analysis and assessment of the SMAP Level 4 Carbon (L4_C) product pertaining to the validated release. The L4_C validated product release effectively replaces an earlier L4_C beta-product release (Kimball et al. 2015). The validated release described in this report incorporates a longer data record and benefits from algorithm and CalVal refinements acquired during the SMAP post-launch CalVal intensive period. The SMAP L4_C algorithms utilize a terrestrial carbon flux model informed by SMAP soil moisture inputs along with optical remote sensing (e.g. MODIS) vegetation indices and other ancillary biophysical data to estimate global daily net ecosystem CO2 exchange (NEE) and component carbon fluxes for vegetation gross primary production (GPP) and ecosystem respiration (Reco). Other L4_C product elements include surface (10 cm depth) soil organic carbon (SOC) stocks and associated environmental constraints to these processes, including soil moisture and landscape freeze/thaw (FT) controls on GPP and respiration (Kimball et al. 2012). The L4_C product encapsulates SMAP carbon cycle science objectives by: 1) providing a direct link between terrestrial carbon fluxes and

  11. Decennial scheme of grid development 2016: National component + synthesis, Regional component, Regional sheets. Version 1 submitted to public consultation - December 2016, final version after public consultation - January 2017

    International Nuclear Information System (INIS)

    2016-12-01

    Two versions of the same decennial scheme are gathered. The first one has been published before public consultation, and the second one after, and thus contains some evolutions. This decennial scheme presents an overview of the main electric power transport infrastructures envisaged for the ten years to come. It notably highlights the different orientations of the planned development: to streamline transits and to ease mutual supports between neighbouring countries, to streamline transits between French regions, to support consumption evolution in territories, to integrate electric power production means, and to ensure a safe operation of the power system. Main projects are more precisely presented while maps and synthetic tables propose a general overview. After this national approach, the report proposes syntheses for the different French regions. These syntheses address the present grid situation, and propose a list and a map of works which have been commissioned in 2016, a recall of regional ambitions regarding climate and energy (Climate-air-energy regional scheme, SRCAE) and renewable energies (regional scheme for the connection of renewable energies to the grid, S3REnR), a list and a map of planned projects, and a presentation of perspectives of grid development beyond a 10 year horizon

  12. Cementitious Barriers Partnership (CBP): Training and Release of CBP Toolbox Software, Version 1.0 - 13480

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.G.; Kosson, D.S.; Garrabrants, A.C.; Sarkar, S. [Vanderbilt University, School of Engineering, CRESP, Nashville, TN 37235 (United States); Flach, G.; Langton, C.; Smith, F.G. III; Burns, H. [Savannah River National Laboratory, Aiken, SC 29808 (United States); Van der Sloot, H. [Hans Van der Sloot Consultancy, Dorpsstraat 216, 1721BV Langedijk (Netherlands); Meeussen, J.C.L. [Nuclear Research and Consultancy Group, Westerduinweg 3, Petten (Netherlands); Samson, E. [SIMCO Technologies, Inc., Quebec (Canada); Mallick, P.; Suttora, L. [U.S. Department of Energy, Washington, DC (United States); Esh, D.; Fuhrmann, M.; Philip, J. [U.S. Nuclear Regulatory Commission, Washington, DC (United States)

    2013-07-01

    by discussions of enhancements desired by participants. Tools were revised based on feedback obtained during the workshops held from April through June 2012. The resulting improved CBP Software Toolbox, including evaluation versions of and LeachXS{sup TM}/ORCHESTRA and STADIUM{sup R} has been made available to workshop and selected other participants for further assessment. Inquiries about future workshops and requests for access to the Toolbox software can be made via the CBP web site [1]. (authors)

  13. Cementitious Barriers Partnership (CBP): Training and Release of CBP Toolbox Software, Version 1.0 - 13480

    International Nuclear Information System (INIS)

    Brown, K.G.; Kosson, D.S.; Garrabrants, A.C.; Sarkar, S.; Flach, G.; Langton, C.; Smith, F.G. III; Burns, H.; Van der Sloot, H.; Meeussen, J.C.L.; Samson, E.; Mallick, P.; Suttora, L.; Esh, D.; Fuhrmann, M.; Philip, J.

    2013-01-01

    of enhancements desired by participants. Tools were revised based on feedback obtained during the workshops held from April through June 2012. The resulting improved CBP Software Toolbox, including evaluation versions of and LeachXS TM /ORCHESTRA and STADIUM R has been made available to workshop and selected other participants for further assessment. Inquiries about future workshops and requests for access to the Toolbox software can be made via the CBP web site [1]. (authors)

  14. The Spanish Version of the Self-Statements during Public Speaking Scale: Validation in Adolescents.

    Science.gov (United States)

    Rivero, Raul; Garcia-Lopez, Luisjoaquin; Hofmann, Stefan G

    2010-01-01

    Contemporary theories of social anxiety emphasize the role of cognitive processes. Although social anxiety disorder is one of the most common mental health problems in adolescents, there are very few self-report instruments available to measure cognitive processes related to social anxiety in adolescents, let alone non-English instruments. The Self-Statements during Public Speaking Scale (SSPS; Hofmann & DiBartolo, 2000) is a brief self-report measure designed to assess self-statements related to public speaking, the most commonly feared social performance situation. In order to fill this gap in the literature, we translated the SSPS into Spanish and administered it to 1,694 adolescents from a community sample, a clinical sample composed of 71 subjects with a principal diagnosis of social anxiety disorder; and a clinical control group consisting of 154 patients. The scale showed good psychometric properties, supporting the use of the Spanish version of the SSPS in adolescents.

  15. Nuclear power: Accidental releases - principles of public health action

    International Nuclear Information System (INIS)

    1984-01-01

    This report is based on the collective knowledge and experience of the members of a Working Group, convened by WHO in collaboration with the Government of Belgium in Brussels on 23-27 November 1981, to discuss and appraise the different actions that might be taken following accidental radioactive releases from nuclear plants. It does not provide detailed technical data, but broadly surveys the rational basis for decision-making, indicating the present position as assessed by members of the Working Group. Four major disciplines (radiological protection, health physics, environmental science and technology, and human biology) and three main professional categories (physicians, engineers and physicists) were represented, providing a comprehensive multidisciplinary approach to the topic. The purpose of this report is to give guidance to national authorities on how to develop the capacity to take action in a nuclear emergency

  16. Arthropods (http://www.iaees.org/publications/journals/arthropods/online-version.asp

    Directory of Open Access Journals (Sweden)

    arthropods@iaees.org

    Full Text Available Arthropods ISSN 2224-4255 URL: http://www.iaees.org/publications/journals/arthropods/online-version.asp RSS: http://www.iaees.org/publications/journals/arthropods/rss.xml E-mail: arthropods@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope ARTHROPODS (ISSN 2224-4255 is an international journal devoted to the publication of articles on various aspects of arthropods, e.g., ecology, biogeography, systematics, biodiversity (species diversity, genetic diversity, et al., conservation, control, etc. The journal provides a forum for examining the importance of arthropods in biosphere (both terrestrial and marine ecosystems and human life in such fields as agriculture, forestry, fishery, environmental management and human health. The scope of Arthropods is wide and embraces all arthropods-insects, arachnids, crustaceans, centipedes, millipedes, and other arthropods. Articles/short communications on new taxa (species, genus, families, orders, etc. and new records of arthropods are particularly welcome. Authors can submit their works to the email box of this journal, arthropods@iaees.org. All manuscripts submitted to this journal must be previously unpublished and may not be considered for publication elsewhere at any time during review period of this journal. Authors are asked to read Author Guidelines before submitting manuscripts. In addition to free submissions from authors around the world, special issues are also accepted. The organizer of a special issue can collect submissions (yielded from a research project, a research group, etc. on a specific research topic, or submissions of a scientific conference for publication of special issue.

  17. Environmental Skeptics and Critics (http://www.iaees.org/publications/journals/environsc/online-version.asp

    Directory of Open Access Journals (Sweden)

    environsc@iaees.org

    Full Text Available Environmental Skeptics and Critics ISSN 2224-4263 URL: http://www.iaees.org/publications/journals/environsc/online-version.asp RSS: http://www.iaees.org/publications/journals/environsc/rss.xml E-mail: environsc@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope The more truth is debated, the clearer it becomes. Science will not proceed without debate and controversy. Wide and in-depth debate and controversy on human's knowledge, attitudes, policies and practices on the environment determines the future of our planet. There are numerous controversial and potentially controversial issues on environmental sciences and practices. ENVIRONMENTAL SKEPTICS and CRITICS (ISSN 2224-4263 is an international journal devoted to the publication of skeptical and critical articles/short communications/letters on theories, viewpoints, methodologies, practices, policies, etc., in ecological and environmental areas. The journal provides a forum for questioning, disputing, arguing, challenging, criticizing and judging known theories, methdologies, practices, and policies, etc., or presenting different ideas. The scope of Environmental Skeptics and Critics is wide and embraces all controversial, non-conclusive or unexplained issues in ecological and environmental areas. Authors can submit their works to the email box of this journal, environsc@iaees.org. All manuscripts submitted to this journal must be previously unpublished and may not be considered for publication elsewhere at any time during review period of this journal. Authors are asked to read Author Guidelines before submitting manuscripts. In addition to free submissions from authors around the world, special issues are also accepted. The organizer of a special issue can collect submissions (yielded from a research project, a research group, etc. on a specific research topic, or submissions of a scientific conference for publication of special issue.

  18. Computational Ecology and Software (http://www.iaees.org/publications/journals/ces/online-version.asp

    Directory of Open Access Journals (Sweden)

    ces@iaees.org

    Full Text Available Computational Ecology and Software ISSN 2220-721X URL: http://www.iaees.org/publications/journals/ces/online-version.asp RSS: http://www.iaees.org/publications/journals/ces/rss.xml E-mail: ces@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope COMPUTATIONAL ECOLOGY AND SOFTWARE (ISSN 2220-721X is an open access, peer-reviewed online journal that considers scientific articles in all different areas of computational ecology. It is the transactions of the International Society of Computational Ecology. The journal is concerned with the ecological researches, constructions and applications of theories and methods of computational sciences including computational mathematics, computational statistics and computer science. It features the simulation, approximation, prediction, recognition, and classification of ecological issues. Intensive computation is one of the major stresses of the journal. The journal welcomes research articles, short communications, review articles, perspectives, and book reviews. The journal also supports the activities of the International Society of Computational Ecology. The topics to be covered by CES include, but are not limited to: •Computation intensive methods, numerical and optimization methods, differential and difference equation modeling and simulation, prediction, recognition, classification, statistical computation (Bayesian computing, randomization, bootstrapping, Monte Carlo techniques, stochastic process, etc., agent-based modeling, individual-based modeling, artificial neural networks, knowledge based systems, machine learning, genetic algorithms, data exploration, network analysis and computation, databases, ecological modeling and computation using Geographical Information Systems, satellite imagery, and other computation intensive theories and methods. •Artificial ecosystems, artificial life, complexity of ecosystems and virtual reality. •The development, evaluation and validation of software and

  19. Network Biology (http://www.iaees.org/publications/journals/nb/online-version.asp

    Directory of Open Access Journals (Sweden)

    networkbiology@iaees.org

    Full Text Available Network Biology ISSN 2220-8879 URL: http://www.iaees.org/publications/journals/nb/online-version.asp RSS: http://www.iaees.org/publications/journals/nb/rss.xml E-mail: networkbiology@iaees.org Editor-in-Chief: WenJun Zhang Aims and Scope NETWORK BIOLOGY (ISSN 2220-8879; CODEN NBEICS is an open access, peer-reviewed international journal that considers scientific articles in all different areas of network biology. It is the transactions of the International Society of Network Biology. It dedicates to the latest advances in network biology. The goal of this journal is to keep a record of the state-of-the-art research and promote the research work in these fast moving areas. The topics to be covered by Network Biology include, but are not limited to: •Theories, algorithms and programs of network analysis •Innovations and applications of biological networks •Ecological networks, food webs and natural equilibrium •Co-evolution, co-extinction, biodiversity conservation •Metabolic networks, protein-protein interaction networks, biochemical reaction networks, gene networks, transcriptional regulatory networks, cell cycle networks, phylogenetic networks, network motifs •Physiological networks •Network regulation of metabolic processes, human diseases and ecological systems •Social networks, epidemiological networks •System complexity, self-organized systems, emergence of biological systems, agent-based modeling, individual-based modeling, neural network modeling, and other network-based modeling, etc. We are also interested in short communications that clearly address a specific issue or completely present a new ecological network, food web, or metabolic or gene network, etc. Authors can submit their works to the email box of this journal, networkbiology@iaees.org. All manuscripts submitted to this journal must be previously unpublished and may not be considered for publication elsewhere at any time during review period of this journal

  20. National preparedness guide for exiting the emergency phase subsequent to a nuclear accident causing moderate, short-term release on French soil - working document, version 0, May 2010

    International Nuclear Information System (INIS)

    2010-05-01

    This National Guide provides basic explanations and methods to assist in drawing up a local plan for the emergency phase way-out, subsequent to a nuclear accident of moderate magnitude causing short-term (under 24 hours) radioactive release, which could possibly occur in France. The accident situations considered in this Guide have little likelihood of arising and are representative of environmental contamination accidents that might occur at French nuclear facilities covered by a special intervention plan (plan particulier d'intervention, PPI). Such accidents may cause environmental contamination warranting action for post-accident impact management within a range of ten to fifty kilometres from the accident site. To provide some perspective, the accidents considered here would be classified Levels 3, 4 or 5 (incidents or accidents causing release into the environment) on the INES scale customarily used to help the public and media to immediately understand the severity of an incident or accident in the nuclear field. This Guide was drawn up subsequently to the work carried out by the Steering Committee on Post- Accident Phase Management in the Event of a Nuclear Accident or Radiological Emergency Situation (CODIRPA), instituted by the French Nuclear Safety Authority (ASN) in June 2005, and in charge of setting out the basic principles underlying the management of nuclear post-accident situations. This version of the Guide shall be updated on the basis of the operating experience feedback received on its use. The Guide is a planning tool, intended for the Prefectures of department where a basic nuclear facility PPI has been instituted. Its purpose is to enable Prefects to plan and effectively conduct preparedness measures at the local level with the aim of winding down the emergency phase, actively involving all of the relevant actors for this purpose. The exit period from the emergency phase is defined as extending approximately one week from the end of the

  1. 78 FR 6401 - Public Notice for Release of Aeronautical Property at the Wilkes-Barre/Scranton International...

    Science.gov (United States)

    2013-01-30

    ... listed above. SUPPLEMENTARY INFORMATION: The FAA invites public comment on the release of land and right... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Public Notice for Release of Aeronautical Property at the Wilkes- Barre/Scranton International Airport (AVP), Avoca, PA AGENCY: Federal...

  2. 77 FR 34010 - Notice of Opportunity To Submit Comment on the Public Release Time of Several Major USDA...

    Science.gov (United States)

    2012-06-08

    ... Statistics Service and Office of the Chief Economist, Department of Agriculture. ACTION: Notice and request... the Chief Economist are currently accepting stakeholder input on the public release time and... the Chief Economist are seeking comments on the release time of several of their major statistical...

  3. Toxic chemical release inventory reporting form R and instructions. Revised 1992 version. Section 313 of the Emergency Planning and Community Right-to-Know Act

    International Nuclear Information System (INIS)

    1993-01-01

    Reporting is required to provide the public with information on the releases of listed toxic chemicals in their communities and to provide EPA with release information to assist the Agency in determining the need for future regulations. Facilities must report the quantities of both routine and accidental releases of listed toxic chemicals, as well as the maximum amount of the listed toxic chemical on-site during the calendar year and the amount contained in wastes transferred off-site. These instructions supplement and elaborate on the requirements in the reporting rule (40 CFR Part 372). Together with the reporting rule, they constitute the reporting requirements. All references in these instructions are to sections in the reporting rule unless otherwise indicated

  4. Exploring Bioeconomy Growth through the Public Release of the Biomass Scenario Model

    Energy Technology Data Exchange (ETDEWEB)

    Newes, Emily K [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Biddy, Mary J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bush, Brian W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Inman, Daniel J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vimmerstedt, Laura J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Peterson, Steve [Lexidyne, LLC

    2017-08-02

    The Biomass Scenario Model (BSM) is an important tool for exploring vibrant future bioeconomy scenarios that leverage domestic resources. Developed by NREL and BETO, this model of the domestic biofuels supply chain has been used to explore success strategies for BETO's activities towards bioeconomy growth. The BSM offers a robust test bed for detailed exploration of effects of BETO activities within the complex context of resource availability; physical, technological, and economic constraints; behavior; and policy. The public release of the model in 2017 will allow broad engagement with the theme of the conference as model users can analyze bioeconomy growth, domestic biomass resource use, and associated effects. The BSM is a carefully validated, state-of-the-art, dynamic model of the biomass to biofuels supply chain. Using a system dynamics simulation modeling approach, the model tracks long-term deployment of biofuels given technology development and investment, considering land availability, the competing oil market, consumer demand, and government policies over time. Sample outputs include biofuels production, feedstock use, capital investment, incentives, and costs of feedstocks and fuels. BSM scenarios reveal technological, economic, and policy challenges, as well as opportunities for dynamic growth of the bioeconomy with strategic public and private investment at key points in the system. The model logic and results have been reviewed extensively, through collaborative analysis, expert reviews and external publications (https://www.zotero.org/groups/bsm_publications/).

  5. Popularization of Science in Brazil: getting onto the public agenda, but how? (Portuguese original version

    Directory of Open Access Journals (Sweden)

    Márcia Tait Lima

    2008-12-01

    Full Text Available The importance the Brazilian government has given in the last few years to the dissemination of science points out the necessity of a more discerning analysis about the establishment of this subject on the public agenda and the related public policies undertaken. This work tries to contribute to the debate as an inquiry about the policies to popularize and disseminate Science and Technology (S&T established by the Science and Technology Popularization and Dissemination Department, which was created in 2004. In order to do so, theoretical references from Public Policy Analysis, the Studies of Science, Technology and Society (SSTS, and Public Communication of Science are used. Furthermore, we analyze some of the results from research on Science and Technology Understanding carried out in Brazil in 2006. As a final point, this associated approach aims at identifying some of the limiting factors related to science dissemination actions in Brazil.

  6. "Blueprint version 2.0": updating public health surveillance for the 21st century.

    Science.gov (United States)

    Smith, Perry F; Hadler, James L; Stanbury, Martha; Rolfs, Robert T; Hopkins, Richard S

    2013-01-01

    Rapid changes to the United States public health system challenge the current strategic approach to surveillance. During 2011, the Council of State and Territorial Epidemiologists convened national experts to reassess public health surveillance in the United States and update surveillance strategies that were published in a 1996 report and endorsed by the Council of State and Territorial Epidemiologists. Although surveillance goals, historical influences, and most methods have not changed, surveillance is being transformed by 3 influences: public health information and preparedness as national security issues; new information technologies; and health care reform. Each offers opportunities for surveillance, but each also presents challenges that public health epidemiologists can best meet by rigorously applying surveillance evaluation concepts, engaging in national standardization activities driven by electronic technologies and health care reform, and ensuring an adequately trained epidemiology workforce.

  7. Publications in PubMed on Ebola and the 2014 outbreak [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Andrea Ballabeni

    2015-10-01

    Full Text Available In this research note we examine the biomedical publication output about Ebola in 2014. We show that the volume of publications has dramatically increased in the past year. In 2014 there have been over 888 publications with ‘ebola’ or ‘ebolavirus’ in the title, approximately 13 times the volume of publication of 2013. The rise reflects an impressive growth starting in the month of August, concomitant with or following the surge in infections, deaths and coverage in news and social media. Though non-research articles have been the major contributors to this growth, there has been a substantial increase in original research articles too, including many papers of basic science. The United States has been the country with the highest number of research articles, followed by Canada and the United Kingdom. We present a comprehensive set of charts and facts that, by describing the volumes and nature of publications in 2014, show how the scientific community has responded to the Ebola outbreak and how it might respond to future similar global threats and media events. This information will assist scholars and policymakers in their efforts to improve scientific research policies with the goal of maximizing both public health and knowledge advancement.

  8. The VIMOS Public Extragalactic Redshift Survey (VIPERS). Full spectroscopic data and auxiliary information release (PDR-2)

    Science.gov (United States)

    Scodeggio, M.; Guzzo, L.; Garilli, B.; Granett, B. R.; Bolzonella, M.; de la Torre, S.; Abbas, U.; Adami, C.; Arnouts, S.; Bottini, D.; Cappi, A.; Coupon, J.; Cucciati, O.; Davidzon, I.; Franzetti, P.; Fritz, A.; Iovino, A.; Krywult, J.; Le Brun, V.; Le Fèvre, O.; Maccagni, D.; Małek, K.; Marchetti, A.; Marulli, F.; Polletta, M.; Pollo, A.; Tasca, L. A. M.; Tojeiro, R.; Vergani, D.; Zanichelli, A.; Bel, J.; Branchini, E.; De Lucia, G.; Ilbert, O.; McCracken, H. J.; Moutard, T.; Peacock, J. A.; Zamorani, G.; Burden, A.; Fumana, M.; Jullo, E.; Marinoni, C.; Mellier, Y.; Moscardini, L.; Percival, W. J.

    2018-01-01

    We present the full public data release (PDR-2) of the VIMOS Public Extragalactic Redshift Survey (VIPERS), performed at the ESO VLT. We release redshifts, spectra, CFHTLS magnitudes and ancillary information (as masks and weights) for a complete sample of 86 775 galaxies (plus 4732 other objects, including stars and serendipitous galaxies); we also include their full photometrically-selected parent catalogue. The sample is magnitude limited to iAB ≤ 22.5, with an additional colour-colour pre-selection devised as to exclude galaxies at z automated pipeline; all redshift determinations were then visually validated and assigned a quality flag. Measurements with a quality flag ≥ 2 are shown to have a confidence level of 96% or larger and make up 88% of all measured galaxy redshifts (76 552 out of 86 775), constituting the VIPERS prime catalogue for statistical investigations. For this sample the rms redshift error, estimated using repeated measurements of about 3000 galaxies, is found to be σz = 0.00054(1 + z). All data are available at http://vipers.inaf.it and on the ESO Archive. Based on observations collected at the European Southern Observatory, Cerro Paranal, Chile, using the Very Large Telescope under programmes 182.A-0886 and partly 070.A-9007. Also based on observations obtained with MegaPrime/MegaCam, a joint project of CFHT and CEA/DAPNIA, at the Canada-France-Hawaii Telescope (CFHT), which is operated by the National Research Council (NRC) of Canada, the Institut National des Sciences de l'Univers of the Centre National de la Recherche Scientifique (CNRS) of France, and the University of Hawaii. This work is based in part on data products produced at TERAPIX and the Canadian Astronomy Data Centre as part of the Canada-France-Hawaii Telescope Legacy Survey, a collaborative project of NRC and CNRS. The VIPERS web site is http://www.vipers.inaf.it/

  9. What does the UK public want from academic science communication? [version 1; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    James Redfern

    2016-06-01

    Full Text Available The overall aim of public academic science communication is to engage a non-scientist with a particular field of science and/or research topic, often driven by the expertise of the academic. An e-survey was designed to provide insight into respondent’s current and future engagement with science communication activities. Respondents provided a wide range of ideas and concerns as to the ‘common practice’ of academic science communication, and whilst they support some of these popular approaches (such as open-door events and science festivals, there are alternatives that may enable wider engagement. Suggestions of internet-based approaches and digital media were strongly encouraged, and although respondents found merits in methods such as science festivals, limitations such as geography, time and topic of interest were a barrier to engagement for some. Academics and scientists need to think carefully about how they plan their science communication activities and carry out evaluations, including considering the point of view of the public, as although defaulting to hands-on open door events at their university may seem like the expected standard, it may not be the best way to reach the intended audience.

  10. Polarisation and consensus: Public acceptance of new technologies in the Federal Republic of Germany. Final version

    Energy Technology Data Exchange (ETDEWEB)

    Petermann, T; Thurn, G; Williams, R; Mills, S [eds.

    1985-01-01

    The report starts out with characterizing the 'climate of acceptance'. After a discussion of the results of surveys on public opinion and attitude, programmes and strategies of some actors in the field of technology policy are introduced; the role of the education system and the influence of the mass media are examined briefly in this context. Further, the paper deals with the development of the problem of acceptance in the course of the past two decades. The debates on nuclear energy and the introduction of new information technologies are analysed with an eye to structural differences. Finally the report turns to some considerations on the role of the acceptance issue in the context of structural problems in society. In an annex it is attempted both to obtain an overview of the various meanings of the term 'acceptance' and to summarise tendencies of social science research on acceptance. (orig./HSCH).

  11. Validity and Reliability of Malay Version of the Job Content Questionnaire among Public Hospital Female Nurses in Malaysia

    Directory of Open Access Journals (Sweden)

    NA Amin

    2015-10-01

    Full Text Available Background: The Job Content Questionnaire (M-JCQ is an established self-reported instrument used across the world to measure the work dimensions based on the Karasek's demand-control-support model. Objective: To evaluate the psychometrics properties of the Malay version of M-JCQ among nurses in Malaysia. Methods: This cross-sectional study was carried out on nurses working in 4 public hospitals in Klang Valley area, Malaysia. M-JCQ was used to assess the perceived psychosocial stressors and physical demands of nurses at their workplaces. Construct validity of the questionnaire was examined using exploratory factor analysis (EFA. Cronbach's α values were used to estimate the reliability (internal consistency of the M-JCQ. Results: EFA showed that 34 selected items were loaded in 4 factors. Except for psychological job demand (Cronbach's α 0.51, the remaining 3 α values for 3 subscales (job control, social support, and physical demand were greater than 0.70, indicating acceptable internal consistency. However, an item was excluded due to poor item-total correlation (r<0.3. The final M-JCQ was consisted of 33 items. Conclusion: The M-JCQ is a reliable and valid instrument to measure psychosocial and physical stressors in the workplace of public hospital nurses in Malaysia.

  12. Developing and validating a tablet version of an illness explanatory model interview for a public health survey in Pune, India.

    Directory of Open Access Journals (Sweden)

    Joseph G Giduthuri

    Full Text Available BACKGROUND: Mobile electronic devices are replacing paper-based instruments and questionnaires for epidemiological and public health research. The elimination of a data-entry step after an interview is a notable advantage over paper, saving investigator time, decreasing the time lags in managing and analyzing data, and potentially improving the data quality by removing the error-prone data-entry step. Research has not yet provided adequate evidence, however, to substantiate the claim of fewer errors for computerized interviews. METHODOLOGY: We developed an Android-based illness explanatory interview for influenza vaccine acceptance and tested the instrument in a field study in Pune, India, for feasibility and acceptability. Error rates for tablet and paper were compared with reference to the voice recording of the interview as gold standard to assess discrepancies. We also examined the preference of interviewers for the classical paper-based or the electronic version of the interview and compared the costs of research with both data collection devices. RESULTS: In 95 interviews with household respondents, total error rates with paper and tablet devices were nearly the same (2.01% and 1.99% respectively. Most interviewers indicated no preference for a particular device; but those with a preference opted for tablets. The initial investment in tablet-based interviews was higher compared to paper, while the recurring costs per interview were lower with the use of tablets. CONCLUSION: An Android-based tablet version of a complex interview was developed and successfully validated. Advantages were not compromised by increased errors, and field research assistants with a preference preferred the Android device. Use of tablets may be more costly than paper for small samples and less costly for large studies.

  13. Evaluation of Aquarius Version-5 Sea Surface Salinity on various spatial and temporal scales

    Science.gov (United States)

    Lee, T.

    2017-12-01

    Sea surface salinity (SSS) products from Aquarius have had three public releases with progressive improvement in data quality: Versions 2, 3, and 4, with the last one being released in October 2015. A systematic assessment of the Version-4, Level-3 Aquarius SSS product was performed on various spatial and temporal scales by comparing it with gridded Argo products (Lee 2016, Geophys. Res. Lett.). The comparison showed that the consistency of Aquarius Version-4 SSS with gridded Argo products is comparable to that between two different gridded Argo products. However, significant seasonal biases remain in high-latitude oceans. Further improvements are being made by the Aquarius team. Aquarius Version 5.0 SSS is scheduled to be released in October 2017 as the final version of the Aquarius Project. This presentation provides a similar evaluation of Version-5 SSS as reported by Lee (2016) and contrast it with the current Version-4 SSS.

  14. The effects of a Dutch version of an Internet-based treatment program for fear of public speaking: a controlled study

    NARCIS (Netherlands)

    Gallego, M.J.; Emmelkamp, P.M.G.; van der Kooij, M.; Mees, H.

    2011-01-01

    The present research is a randomized controlled trial in which the effects of a Dutch version of «Talk to me», an Internet-based cognitive-behavioral treatment for fear of public speaking were investigated. Forty one participants with a formal diagnosis of social phobia were assigned at random to

  15. Documentation to the NCES Common Core of Data Public Elementary/Secondary School Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-100

    Science.gov (United States)

    Keaton, Patrick

    2013-01-01

    The documentation for this provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Public Elementary/Secondary School Universe Survey for SY 2011-12, contains a brief description of the data collection, along with information required to understand and access the data file. The SY 2011-12…

  16. Validity and Reliability of Malay Version of the Job Content Questionnaire among Public Hospital Female Nurses in Malaysia.

    Science.gov (United States)

    Amin, N A; Quek, K F; Oxley, J A; Noah, R M; Nordin, R

    2015-10-01

    The Job Content Questionnaire (M-JCQ) is an established self-reported instrument used across the world to measure the work dimensions based on the Karasek's demand-control-support model. To evaluate the psychometrics properties of the Malay version of M-JCQ among nurses in Malaysia. This cross-sectional study was carried out on nurses working in 4 public hospitals in Klang Valley area, Malaysia. M-JCQ was used to assess the perceived psychosocial stressors and physical demands of nurses at their workplaces. Construct validity of the questionnaire was examined using exploratory factor analysis (EFA). Cronbach's α values were used to estimate the reliability (internal consistency) of the M-JCQ. EFA showed that 34 selected items were loaded in 4 factors. Except for psychological job demand (Cronbach's α 0.51), the remaining 3 α values for 3 subscales (job control, social support, and physical demand) were greater than 0.70, indicating acceptable internal consistency. However, an item was excluded due to poor item-total correlation (rMalaysia.

  17. 76 FR 66040 - NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft...

    Science.gov (United States)

    2011-10-25

    ...-01] NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft... draft version of the NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0... Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Release 2.0) (Draft) for public review and...

  18. Safeguarding National Security Through Public Release of Environmental Information: Moving the Debate to the Next Level

    National Research Council Canada - National Science Library

    Jacobson, Joseph

    2002-01-01

    ..., and the Chemical Safety Information, Site Security and Fuels Regulatory Relief Act The article then focuses on the current state of the law regarding release or withholding of chemical-hazard information...

  19. Radiological fundamentals for decision making on public radiation protection measures in case of accident caused radionuclide release

    International Nuclear Information System (INIS)

    Genkel, Simone

    2009-01-01

    Following the accepted revised version of the recommendations concerning in the frame of emergency management by the German SSK (radiation protection commission) the radiological fundamentals dating from 1990 were revised. The corrections of the dose benchmarks for children and juveniles for the case of iodine tablets intake that were included, in the chapter on radiation protection for the field and rescue personnel of fire brigade and police the new regulations of the radiation protection ordinance were added. The volume includes two parts: Guidelines for emergency planning in the environment of nuclear facilities; guideline on public information in nuclear emergency situations.

  20. NESHAP Dose-Release Factor Isopleths for Five Source-to-Receptor Distances from the Center of Site and H-Area for all Compass Sectors at SRS using CAP88-PC Version 4.0

    Energy Technology Data Exchange (ETDEWEB)

    Trimor, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-08-09

    The Environmental Protection Agency (EPA) requires the use of the computer model CAP88-PC to estimate the total effective doses (TED) for demonstrating compliance with 40 CFR 61, Subpart H (EPA 2006), the National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. As such, CAP88 Version 4.0 was used to calculate the receptor dose due to routine atmospheric releases at the Savannah River Site (SRS). For estimation, NESHAP dose-release factors (DRFs) have been supplied to Environmental Compliance and Area Closure Projects (EC&ACP) for many years. DRFs represent the dose to a maximum receptor exposed to 1 Ci of a specified radionuclide being released into the atmosphere. They are periodically updated to include changes in the CAP88 version, input parameter values, site meteorology, and location of the maximally exposed individual (MEI). This report presents the DRFs of tritium oxide released at two onsite locations, center-of-site (COS) and H-Area, at 0 ft. elevation to maximally exposed individuals (MEIs) located 1000, 3000, 6000, 9000, and 12000 meters from the release areas for 16 compass sectors. The analysis makes use of area-specific meteorological data (Viner 2014).

  1. VizieR Online Data Catalog: The Chandra Source Catalog, Release 1.1 (Evans+ 2012)

    Science.gov (United States)

    Evans, I. N.; Primini, F. A.; Glotfelty, C. S.; Anderson, C. S.; Bonaventura, N. R.; Chen, J. C.; Davis, J. E.; Doe, S. M.; Evans, J. D.; Fabbiano, G.; Galle, E. C.; Gibbs, D. G.; Grier, J. D.; Hain, R. M.; Hall, D. M.; Harbo, P. N.; He, X.; Houck, J. C.; Karovska, M.; Kashyap, V. L.; Lauer, J.; McCollough, M. L.; McDowell, J. C.; Miller, J. B.; Mitschang, A. W.; Morgan, D. L.; Mossman, A. E.; Nichols, J. S.; Nowak, M. A.; Plummer, D. A.; Refsdal, B. L.; Rots, A. H.; Siemiginowska, A.; Sundheim, B. A.; Tibbetts, M. S.; van Stone, D. W.; Winkelman, S. L.; Zografou, P.

    2014-01-01

    This version of the catalog is release 1.1. It includes the information contained in release 1.0.1, plus point and compact source data extracted from HRC imaging observations, and catch-up ACIS observations released publicly prior to the end of 2009. (1 data file).

  2. Ray-tracing 3D dust radiative transfer with DART-Ray: code upgrade and public release

    Science.gov (United States)

    Natale, Giovanni; Popescu, Cristina C.; Tuffs, Richard J.; Clarke, Adam J.; Debattista, Victor P.; Fischera, Jörg; Pasetto, Stefano; Rushton, Mark; Thirlwall, Jordan J.

    2017-11-01

    We present an extensively updated version of the purely ray-tracing 3D dust radiation transfer code DART-Ray. The new version includes five major upgrades: 1) a series of optimizations for the ray-angular density and the scattered radiation source function; 2) the implementation of several data and task parallelizations using hybrid MPI+OpenMP schemes; 3) the inclusion of dust self-heating; 4) the ability to produce surface brightness maps for observers within the models in HEALPix format; 5) the possibility to set the expected numerical accuracy already at the start of the calculation. We tested the updated code with benchmark models where the dust self-heating is not negligible. Furthermore, we performed a study of the extent of the source influence volumes, using galaxy models, which are critical in determining the efficiency of the DART-Ray algorithm. The new code is publicly available, documented for both users and developers, and accompanied by several programmes to create input grids for different model geometries and to import the results of N-body and SPH simulations. These programmes can be easily adapted to different input geometries, and for different dust models or stellar emission libraries.

  3. Advice concerning radionuclide release of nuclear power plants and public health

    International Nuclear Information System (INIS)

    1984-01-01

    Amongst the severe accidents with nuclear power plants, a number of scenario's is theoretically possible. These scenario's lead to more or less serious consequences for the environment. Characteristics for the category of accidents was the early breakdown of the containment of the reactor. In recent years more and more doubt has risen with regard to the most serious scenario KE. In the Netherlands the Committee for Reactor Safety (CRV) has reported on this subject (annex 1). According to the CRV the release of a number of important radionuclides, in the case of scenario KE, will be very much less than was supposed in the past. Also, the nuclides will be released much later than was supposed before. A committee of the Dutch Health Council, starting from the CRV-report, has made calculations on the radiological consequences of the KE-scenario, corrected in accordance with these new developments (KEH). As could be expected, this category KEH proves to be considerably less dangerous than was supposed before. Irradiation of the surrounding population with a lethal dose would not occur anymore. The number of somatic and genetic effects would be very small. The conclusions drawn from these calculations are given. These results are compared with calculated consequences of an accident of the KM-category. The CRV has defined a maximised accident from this category (KMM). The report includes the report of the Dutch Commission on Reactor Safety (CR-82-71) as an appendix. (Auth.)

  4. ACUTRI: a computer code for assessing doses to the general public due to acute tritium releases

    Energy Technology Data Exchange (ETDEWEB)

    Yokoyama, Sumi; Noguchi, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ryufuku, Susumu; Sasaki, Toshihisa; Kurosawa, Naohiro [Visible Information Center, Inc., Tokai, Ibaraki (Japan)

    2002-11-01

    Tritium, which is used as a fuel of a D-T burning fusion reactor, is the most important radionuclide for the safety assessment of a nuclear fusion experimental reactor such as ITER. Thus, a computer code, ACUTRI, which calculates the radiological impact of tritium released accidentally to the atmosphere, has been developed, aiming to be of use in a discussion of licensing of a fusion experimental reactor and an environmental safety evaluation method in Japan. ACUTRI calculates an individual tritium dose based on transfer models specific to tritium in the environment and ICRP dose models. In this calculation it is also possible to analyze statistically on meteorology in the same way as a conventional dose assessment method according to the meteorological guide of the Nuclear Safety Commission of Japan. A Gaussian plume model is used for calculating the atmospheric dispersion of tritium gas (HT) and/or tritiated water (HTO). The environmental pathway model in ACUTRI considers the following internal exposures: inhalation from a primary plume (HT and/or HTO) released from the facilities and inhalation from a secondary plume (HTO) reemitted from the ground following deposition of HT and HTO. This report describes an outline of the ACUTRI code, a user guide and the results of test calculation. (author)

  5. Reference computations of public dose and cancer risk from airborne releases of uranium and Class W plutonium

    International Nuclear Information System (INIS)

    Peterson, V.L.

    1995-01-01

    This report presents ''reference'' computations that can be used by safety analysts in the evaluations of the consequences of postulated atmospheric releases of radionuclides from the Rocky Flats Environmental Technology Site. These computations deal specifically with doses and health risks to the public. The radionuclides considered are Class W Plutonium, all classes of Enriched Uranium, and all classes of Depleted Uranium. (The other class of plutonium, Y, was treated in an earlier report.) In each case, one gram of the respirable material is assumed to be released at ground leveL both with and without fire. The resulting doses and health risks can be scaled to whatever amount of release is appropriate for a postulated accident being investigated. The report begins with a summary of the organ-specific stochastic risk factors appropriate for alpha radiation, which poses the main health risk of plutonium and uranium. This is followed by a summary of the atmospheric dispersion factors for unfavorable and typical weather conditions for the calculation of consequences to both the Maximum Offsite Individual and the general population within 80 km (50 miles) of the site

  6. ACUTRI a computer code for assessing doses to the general public due to acute tritium releases

    CERN Document Server

    Yokoyama, S; Noguchi, H; Ryufuku, S; Sasaki, T

    2002-01-01

    Tritium, which is used as a fuel of a D-T burning fusion reactor, is the most important radionuclide for the safety assessment of a nuclear fusion experimental reactor such as ITER. Thus, a computer code, ACUTRI, which calculates the radiological impact of tritium released accidentally to the atmosphere, has been developed, aiming to be of use in a discussion of licensing of a fusion experimental reactor and an environmental safety evaluation method in Japan. ACUTRI calculates an individual tritium dose based on transfer models specific to tritium in the environment and ICRP dose models. In this calculation it is also possible to analyze statistically on meteorology in the same way as a conventional dose assessment method according to the meteorological guide of the Nuclear Safety Commission of Japan. A Gaussian plume model is used for calculating the atmospheric dispersion of tritium gas (HT) and/or tritiated water (HTO). The environmental pathway model in ACUTRI considers the following internal exposures: i...

  7. Escitalopram prolonged fear induced by simulated public speaking and released hypothalamic-pituitary-adrenal axis activation.

    Science.gov (United States)

    Garcia-Leal, C; Del-Ben, C M; Leal, F M; Graeff, F G; Guimarães, F S

    2010-05-01

    Simulated public speaking (SPS) test is sensitive to drugs that interfere with serotonin-mediated neurotransmission and is supposed to recruit neural systems involved in panic disorder. The study was aimed at evaluating the effects of escitalopram, the most selective serotonin-selective reuptake inhibitor available, in SPS. Healthy males received, in a double-blind, randomized design, placebo (n = 12), 10 (n = 17) or 20 (n = 14) mg of escitalopram 2 hours before the test. Behavioural, autonomic and neuroendocrine measures were assessed. Both doses of escitalopram did not produce any effect before or during the speech but prolonged the fear induced by SPS. The test itself did not significantly change cortisol and prolactin levels but under the higher dose of escitalopram, cortisol and prolactin increased immediately after SPS. This fear-enhancing effect of escitalopram agrees with previously reported results with less selective serotonin reuptake inhibitors and the receptor antagonist ritanserin, indicating that serotonin inhibits the fear of speaking in public.

  8. Release of airborne radionuclides from Olympic Dam operations and exposure assessment for members of the public

    International Nuclear Information System (INIS)

    Harris, F.F.; Chandler, W.P.

    1992-01-01

    Olympic Dam Operations, a copper, uranium, silver and gold producing project, is situated in a semi-arid area 550 km north of Adelaide. Airborne dispersal is the major transport pathway of operation-related radionuclides to members of the public, and as such has become the focus of a major environmental monitoring program. Major emissions consist of radon and its associated daughters and radionuclides in dust that originate from mine, metallurgical plant, ore and mullock stockpiles and the tailings retention system. Dispersion modelling and measured ground level concentrations have been utilised to calculate the effective dose equivalent for three critical groups. All critical groups exposures are less than 0.2 mSv by the most conservative calculation and are well below the legislative limit of 1 mSv applicable to members of the public. 12 refs., 5 gabs., 12 figs

  9. COSY INFINITY Version 9

    International Nuclear Information System (INIS)

    Makino, Kyoko; Berz, Martin

    2006-01-01

    In this paper, we review the features in the newly released version of COSY INFINITY, which currently has a base of more than 1000 registered users, focusing on the topics which are new and some topics which became available after the first release of the previous versions 8 and 8.1. The recent main enhancements of the code are devoted to reliability and efficiency of the computation, to verified integration, and to rigorous global optimization. There are various data types available in COSY INFINITY to support these goals, and the paper also reviews the feature and usage of those data types

  10. Reference computations of public dose and cancer risk from airborne releases of plutonium. Nuclear safety technical report

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, V.L.

    1993-12-23

    This report presents results of computations of doses and the associated health risks of postulated accidental atmospheric releases from the Rocky Flats Plant (RFP) of one gram of weapons-grade plutonium in a form that is respirable. These computations are intended to be reference computations that can be used to evaluate a variety of accident scenarios by scaling the dose and health risk results presented here according to the amount of plutonium postulated to be released, instead of repeating the computations for each scenario. The MACCS2 code has been used as the basis of these computations. The basis and capabilities of MACCS2 are summarized, the parameters used in the evaluations are discussed, and results are presented for the doses and health risks to the public, both the Maximum Offsite Individual (a maximally exposed individual at or beyond the plant boundaries) and the population within 50 miles of RFP. A number of different weather scenarios are evaluated, including constant weather conditions and observed weather for 1990, 1991, and 1992. The isotopic mix of weapons-grade plutonium will change as it ages, the {sup 241}Pu decaying into {sup 241}Am. The {sup 241}Am reaches a peak concentration after about 72 years. The doses to the bone surface, liver, and whole body will increase slightly but the dose to the lungs will decrease slightly. The overall cancer risk will show almost no change over this period. This change in cancer risk is much smaller than the year-to-year variations in cancer risk due to weather. Finally, x/Q values are also presented for other applications, such as for hazardous chemical releases. These include the x/Q values for the MOI, for a collocated worker at 100 meters downwind of an accident site, and the x/Q value integrated over the population out to 50 miles.

  11. Caught you: threats to confidentiality due to the public release of large-scale genetic data sets.

    Science.gov (United States)

    Wjst, Matthias

    2010-12-29

    Large-scale genetic data sets are frequently shared with other research groups and even released on the Internet to allow for secondary analysis. Study participants are usually not informed about such data sharing because data sets are assumed to be anonymous after stripping off personal identifiers. The assumption of anonymity of genetic data sets, however, is tenuous because genetic data are intrinsically self-identifying. Two types of re-identification are possible: the "Netflix" type and the "profiling" type. The "Netflix" type needs another small genetic data set, usually with less than 100 SNPs but including a personal identifier. This second data set might originate from another clinical examination, a study of leftover samples or forensic testing. When merged to the primary, unidentified set it will re-identify all samples of that individual. Even with no second data set at hand, a "profiling" strategy can be developed to extract as much information as possible from a sample collection. Starting with the identification of ethnic subgroups along with predictions of body characteristics and diseases, the asthma kids case as a real-life example is used to illustrate that approach. Depending on the degree of supplemental information, there is a good chance that at least a few individuals can be identified from an anonymized data set. Any re-identification, however, may potentially harm study participants because it will release individual genetic disease risks to the public.

  12. Caught you: threats to confidentiality due to the public release of large-scale genetic data sets

    Directory of Open Access Journals (Sweden)

    Wjst Matthias

    2010-12-01

    Full Text Available Abstract Background Large-scale genetic data sets are frequently shared with other research groups and even released on the Internet to allow for secondary analysis. Study participants are usually not informed about such data sharing because data sets are assumed to be anonymous after stripping off personal identifiers. Discussion The assumption of anonymity of genetic data sets, however, is tenuous because genetic data are intrinsically self-identifying. Two types of re-identification are possible: the "Netflix" type and the "profiling" type. The "Netflix" type needs another small genetic data set, usually with less than 100 SNPs but including a personal identifier. This second data set might originate from another clinical examination, a study of leftover samples or forensic testing. When merged to the primary, unidentified set it will re-identify all samples of that individual. Even with no second data set at hand, a "profiling" strategy can be developed to extract as much information as possible from a sample collection. Starting with the identification of ethnic subgroups along with predictions of body characteristics and diseases, the asthma kids case as a real-life example is used to illustrate that approach. Summary Depending on the degree of supplemental information, there is a good chance that at least a few individuals can be identified from an anonymized data set. Any re-identification, however, may potentially harm study participants because it will release individual genetic disease risks to the public.

  13. USGS Environmental health science strategy: providing environmental health science for a changing world: public review release

    Science.gov (United States)

    Bright, Patricia R.; Buxton, Herbert T.; Balistrieri, Laurie S.; Barber, Larry B.; Chapelle, Francis H.; Cross, Paul C.; Krabbenhoft, David P.; Plumlee, Geoffrey S.; Sleeman, Jonathan M.; Tillitt, Donald E.; Toccalino, Patricia L.; Winton, James R.

    2012-01-01

    America has an abundance of natural resources. We have bountiful clean water, fertile soil, and unrivaled national parks, wildlife refuges, and public lands. These resources enrich our lives and preserve our health and wellbeing. These resources have been maintained because of our history of respect for their value and an enduring commitment to their vigilant protection. Awareness of the social, economic, and personal value of the health of our environment is increasing. The emergence of environmentally driven diseases caused by environmental exposure to contaminants and pathogens is a growing concern worldwide. New health threats and patterns of established threats are affected by both natural and anthropogenic changes to the environment. Human activities are key drivers of emerging (new and re-emerging) health threats. Societal demands for land and natural resources, a better quality of life, improved economic prosperity, and the environmental impacts associated with these demands will continue to increase. Natural earth processes, climate trends, and related climatic events will add to the environmental impact of human activities. These environmental drivers will influence exposure to disease agents, including viral, bacterial, prion, and fungal pathogens, parasites, natural earth materials, toxins and other biogenic compounds, and synthetic chemicals and substances. The U.S. Geological Survey (USGS) defines environmental health science broadly as the interdisciplinary study of relations among the quality of the physical environment, the health of the living environment, and human health. The interactions among these three spheres are driven by human activities, ecological processes, and natural earth processes; the interactions affect exposure to contaminants and pathogens and the severity of environmentally driven diseases in animals and people. This definition provides USGS with a framework for synthesizing natural science information from across the Bureau

  14. Guidelines To Provide Uniform Wiring Service for Telecommunications in North Carolina Public Schools. Version 1.1.0.

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh.

    The purpose of these guidelines, intended for the North Carolina public school administrator, the building architect, and the builder, is to facilitate the planning and installation of uniform wiring in a building regardless of the type of equipment that will ultimately be installed. This approach will allow for flexibility in curriculum…

  15. Development of Public Training System for Emergency Exercise Using Virtual Reality Technology Based on Radioactive Release Accident

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Il; Park, Seong Jun; Lee, Dewhey; Song, Sub Lee; Park, Younwon [BEES Inc., Daejeon (Korea, Republic of)

    2016-10-15

    An exercise is normally conducted for a day or two days depending on the scale of the exercise. What we have experienced up to date there are several limitations in the radiological emergency exercises such as low public acceptance, poor enthusiasm in the exercise participation, not very attracting exercise scenarios, low efficiency in conducting an exercise, and so on. In order to overcome the limitations of the present exercising system, we would like to develop a radiological emergency exercise system using VR (virtual reality) technology based on a radioactive release accident. In this paper, we just introduce some basic development methods and event tree based scenario as a beginning stage. After the accident in Fukushima Daiichi NPP, the importance of emergency exercise especially for the public is far more emphasized around the world more and more. However, the human labor focused radiological emergency exercise up to now has many limitations. After developing this system properly and by using it, we could even expect to estimate the weak points of the emergency arrangements and strategy we have.

  16. Development of Public Training System for Emergency Exercise Using Virtual Reality Technology Based on Radioactive Release Accident

    International Nuclear Information System (INIS)

    Lee, Byung Il; Park, Seong Jun; Lee, Dewhey; Song, Sub Lee; Park, Younwon

    2016-01-01

    An exercise is normally conducted for a day or two days depending on the scale of the exercise. What we have experienced up to date there are several limitations in the radiological emergency exercises such as low public acceptance, poor enthusiasm in the exercise participation, not very attracting exercise scenarios, low efficiency in conducting an exercise, and so on. In order to overcome the limitations of the present exercising system, we would like to develop a radiological emergency exercise system using VR (virtual reality) technology based on a radioactive release accident. In this paper, we just introduce some basic development methods and event tree based scenario as a beginning stage. After the accident in Fukushima Daiichi NPP, the importance of emergency exercise especially for the public is far more emphasized around the world more and more. However, the human labor focused radiological emergency exercise up to now has many limitations. After developing this system properly and by using it, we could even expect to estimate the weak points of the emergency arrangements and strategy we have

  17. Hypersensitivity reactions to anticancer agents: Data mining of the public version of the FDA adverse event reporting system, AERS

    Directory of Open Access Journals (Sweden)

    Sakaeda Toshiyuki

    2011-10-01

    Full Text Available Abstract Background Previously, adverse event reports (AERs submitted to the US Food and Drug Administration (FDA database were reviewed to confirm platinum agent-associated hypersensitivity reactions. The present study was performed to confirm whether the database could suggest the hypersensitivity reactions caused by anticancer agents, paclitaxel, docetaxel, procarbazine, asparaginase, teniposide, and etoposide. Methods After a revision of arbitrary drug names and the deletion of duplicated submissions, AERs involving candidate agents were analyzed. The National Cancer Institute Common Terminology Criteria for Adverse Events version 4.0 was applied to evaluate the susceptibility to hypersensitivity reactions, and standardized official pharmacovigilance tools were used for quantitative detection of signals, i.e., drug-associated adverse events, including the proportional reporting ratio, the reporting odds ratio, the information component given by a Bayesian confidence propagation neural network, and the empirical Bayes geometric mean. Results Based on 1,644,220 AERs from 2004 to 2009, the signals were detected for paclitaxel-associated mild, severe, and lethal hypersensitivity reactions, and docetaxel-associated lethal reactions. However, the total number of adverse events occurring with procarbazine, asparaginase, teniposide, or etoposide was not large enough to detect signals. Conclusions The FDA's adverse event reporting system, AERS, and the data mining methods used herein are useful for confirming drug-associated adverse events, but the number of co-occurrences is an important factor in signal detection.

  18. Public exposure from environmental release of radioactive material under normal operation of unit-1 Bushehr nuclear power plant

    International Nuclear Information System (INIS)

    Sohrabi, M.; Parsouzi, Z.; Amrollahi, R.; Khamooshy, C.; Ghasemi, M.

    2013-01-01

    Highlights: ► The unit-1 Bushehr nuclear power plant is a VVER type reactor with 1000 MWe power. ► Doses of public critical groups living around the plant were assessed under normal reactor operation conditions. ► PC-CREAM 98 computer code developed by the HPA was applied to assess the public doses. ► Doses are comparable with those in the FSAR, in the ER and doses monitored. ► The doses assessed are lower than the dose constraint of 0.1 mSv/y associated with the plant. - Abstract: The Unit-1 Bushehr Nuclear Power Plant (BNPP-1), constructed at the Hallileh site near Bushehr located at the coast of the Persian Gulf, Iran, is a VVER type reactor with 1000 MWe power. According to standard practices, under normal operation conditions of the plant, radiological assessment of atmospheric and aquatic releases to the environment and assessment of public exposures are considered essential. In order to assess the individual and collective doses of the critical groups of population who receive the highest dose from radioactive discharges into the environment (atmosphere and aquatic) under normal operation conditions, this study was conducted. To assess the doses, the PC-CREAM 98 computer code developed by the Radiation Protection Division of the Health Protection Agency (HPA; formerly called NRPB) was applied. It uses a standard Gaussian plume dispersion model and comprises a suite of models and data for estimation of the radiological impact assessments of routine and continuous discharges from an NPP. The input data include a stack height of 100 m annual radionuclides release of gaseous effluents from the stack and liquid effluents that are released from heat removal system, meteorological data from the Bushehr local meteorological station, and the data for agricultural products. To assess doses from marine discharges, consumption of sea fish, crustacean and mollusca were considered. According to calculation by PC-CREAM 98 computer code, the highest individual

  19. EnLightenment: High resolution smartphone microscopy as an educational and public engagement platform [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Laura C. Wicks

    2018-05-01

    Full Text Available We developed a simple, cost-effective smartphone microscopy platform for use in educational and public engagement programs. We demonstrated its effectiveness, and potential for citizen science through a national imaging initiative, EnLightenment. The cost effectiveness of the instrument allowed for the program to deliver over 500 microscopes to more than 100 secondary schools throughout Scotland, targeting 1000’s of 12-14 year olds. Through careful, quantified, selection of a high power, low-cost objective lens, our smartphone microscope has an imaging resolution of microns, with a working distance of 3 mm. It is therefore capable of imaging single cells and sub-cellular features, and retains usability for young children. The microscopes were designed in kit form and provided an interdisciplinary educational tool. By providing full lesson plans and support material, we developed a framework to explore optical design, microscope performance, engineering challenges on construction and real-world applications in life sciences, biological imaging, marine biology, art, and technology. A national online imaging competition framed EnLightenment; with over 500 high quality images submitted of diverse content, spanning multiple disciplines. With examples of cellular and sub-cellular features clearly identifiable in some submissions, we show how young public can use these instruments for research-level imaging applications, and the potential of the instrument for citizen science programs.

  20. EnLightenment: High resolution smartphone microscopy as an educational and public engagement platform [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Laura C. Wicks

    2017-11-01

    Full Text Available We developed a simple, cost-effective smartphone microscopy platform for use in educational and public engagement programs. We demonstrated its effectiveness, and potential for citizen science through a national imaging initiative, EnLightenment. The cost effectiveness of the instrument allowed for the program to deliver over 500 microscopes to more than 100 secondary schools throughout Scotland, targeting 1000’s of 12-14 year olds. Through careful, quantified, selection of a high power, low-cost objective lens, our smartphone microscope has an imaging resolution of microns, with a working distance of 3 mm. It is therefore capable of imaging single cells and sub-cellular features, and retains usability for young children. The microscopes were designed in kit form and provided an interdisciplinary educational tool. By providing full lesson plans and support material, we developed a framework to explore optical design, microscope performance, engineering challenges on construction and real-world applications in life sciences, biological imaging, marine biology, art, and technology. A national online imaging competition framed EnLightenment; with over 500 high quality images submitted of diverse content, spanning multiple disciplines. With examples of cellular and sub-cellular features clearly identifiable in some submissions, we show how young public can use these instruments for research-level imaging applications, and the potential of the instrument for citizen science programs.

  1. Cielo Computational Environment Usage Model With Mappings to ACE Requirements for the General Availability User Environment Capabilities Release Version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Vigil,Benny Manuel [Los Alamos National Laboratory; Ballance, Robert [SNL; Haskell, Karen [SNL

    2012-08-09

    Cielo is a massively parallel supercomputer funded by the DOE/NNSA Advanced Simulation and Computing (ASC) program, and operated by the Alliance for Computing at Extreme Scale (ACES), a partnership between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL). The primary Cielo compute platform is physically located at Los Alamos National Laboratory. This Cielo Computational Environment Usage Model documents the capabilities and the environment to be provided for the Q1 FY12 Level 2 Cielo Capability Computing (CCC) Platform Production Readiness Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory, or Sandia National Laboratories, but also addresses the needs of users working in the unclassified environment. The Cielo Computational Environment Usage Model maps the provided capabilities to the tri-Lab ASC Computing Environment (ACE) Version 8.0 requirements. The ACE requirements reflect the high performance computing requirements for the Production Readiness Milestone user environment capabilities of the ASC community. A description of ACE requirements met, and those requirements that are not met, are included in each section of this document. The Cielo Computing Environment, along with the ACE mappings, has been issued and reviewed throughout the tri-Lab community.

  2. Developments in consequence modelling of accidental releases of hazardous materials

    NARCIS (Netherlands)

    Boot, H.

    2012-01-01

    The modelling of consequences of releases of hazardous materials in the Netherlands has mainly been based on the “Yellow Book”. Although there is no updated version of this official publication, new insights have been developed during the last decades. This article will give an overview of new

  3. User Guide ECOREA-RICE (version 1.0). Program for assessing the transfer of radionuclides released accidentally onto flooded rice-fields

    International Nuclear Information System (INIS)

    Keum, Dong Kwon; Lee, Han Soo; Choi, Hei Hu; Kang, Hee Seok; Lee, Chang Woo

    2004-05-01

    The computer code ECOREA-RICE is a dynamic compartment model that is specially designed for estimating the transfer of radionuclides deposited onto flooded rice-fields after an accidental release. The model consists of six independent compartments including rice-body, grain, surface water, root-zone soil, fixed soil and deep soil, and takes into account the transfer processes including radioactive decay, percolation, leaching, shoot-base absorption, root-uptake, weathering, translocation, fixation in soil by adsorption and desorption, and soil-mixing by plowing. The rate of the change of radioactivity in compartments is expressed by a set of the first order ordinary differential equations, which are solved by the fourth order Runge-Kutta algorithm. Input to the program includes the deposition date, transplanting date, ear emergence date, harvest date, soil data, the biomass data of rice-plant, and rate constants associated with transfer processes. Output includes the list of input data, the activity of radionuclides in compartment, the rate constant, and the transfer factor of rice-body and grain with time

  4. Assessment of radionuclide databases in CAP88 mainframe version 1.0 and Windows-based version 3.0.

    Science.gov (United States)

    LaBone, Elizabeth D; Farfán, Eduardo B; Lee, Patricia L; Jannik, G Timothy; Donnelly, Elizabeth H; Foley, Trevor Q

    2009-09-01

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several U.S. Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants regulations. CAP88 Mainframe, referred to as version 1.0 on the U.S. Environmental Protection Agency Web site (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose, and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, 35 radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, 122 radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  5. Results for SEAFP-subtask A 10: Assessments of individual and collective doses to the public for routine and accidental releases of tritium and activation products

    International Nuclear Information System (INIS)

    Raskob, W.

    1995-04-01

    Dose calculations have been performed for accidental releases of tritium and activation products. Unit releases of 1 GBq per nuclide have been investigated for 31 fusion relevant nuclides. Additionally, unit releases of 1g of tritium and several activated materials have been studied. Under normal operation conditions, dose calculations have been performed for real source terms of tritium and activated materials. The individual dose values at the fence of the site (1 km) as well as the collective dose to the public (from 1 km to 100 km) have been obtained. As site specific parameters are still missing, different so called ''worst case'' release conditions have been applied. To have a first guess of the influence of the release duration on the dose to the Most Exposed Individual (MEI) in the vicinity of a reactor, different release durations, ranging from 1 hour up to 168 hours have been investigated, too. Finally, dose calculations have been performed for mobilisation source terms which take account of deposition and retention in the plant. This has been done for several RPM and APM source terms. The dose values of these final source terms seem to be less than every criteria to start emergency actions, however, some problems e.g. the behaviour of tritium in the plant, remain unsolved. (orig.)

  6. [Twenty-year History and Future Challenges in Transparency Enhancement of Review Process for Approval: Focus on Public Release of Review Reports regarding New Drugs and Medical Devices].

    Science.gov (United States)

    Morimoto, Kazushige; Kawasaki, Satoko; Yoshida, Yasunori

    2015-01-01

    For 20 years, the Ministry of Health, Labour and Welfare (MHLW, formerly Ministry of Health and Welfare (MHW)) has been trying to increase transparency of the review process for approving reports in order to promote the rational use of newly approved drugs and medical devices. The first Summary Basis of Approval (SBA) was published by MHW in 1994. In 1999, evaluation reports were prepared by MHW and the Pharmaceuticals and Medical Devices Evaluation Center to make them available to the public. In 2005, a notice from the Chief Executive of the Pharmaceuticals and Medical Devices Agency (PMDA) made procedures for public release of information on reviewing applications for new drugs. In 2006, 90 review reports of newly approved drugs and eight medical devices were revealed on PMDA websites. The dissemination of information by the United States Food and Drug Administration (FDA) and that of the European Medicines Agency (EMA) were studied and compared with that of the MHLW and PMDA. While common technical documents (CTD) for new drugs and summary technical documents (STED) for new medical devices have been released by PMDA, such documents are not released by the FDA and EMA. The European Public Assessment Report (EAPR) summary for the public is an interesting questionnaire approach that uses the "What," "How" and "Why" format. Finally, future proposals for the next decade are also outlined.

  7. Documentation for the NCES Common Core of Data National Public Education Financial Survey (NPEFS), School Year 2008-09 (Fiscal Year 2009). Revised File Version 1b. NCES 2011-330rev

    Science.gov (United States)

    Cornman, Stephen Q.; Zhou, Lei; Nakamoto, Nanae

    2012-01-01

    This documentation is for the revised file (Version 1b) of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) National Public Education Financial Survey (NPEFS) for school year 2008-2009, fiscal year 2009 (FY 09). It contains a brief description of the data collection along with information required to understand and…

  8. Particular intervention plan of the Civaux Nuclear Power Plant. Public version. Special provision of the organisation plan for civil protection response

    International Nuclear Information System (INIS)

    2016-04-01

    The Particular intervention plan (PPI in French) is an emergency plan which foresees the measures and means to be implemented to address the potential risks of the presence and operation of a nuclear facility. This plan is implemented and developed by the Prefect in case of nuclear accident (or incident leading to a potential accident), the impact of which extending beyond the facility perimeter. It represents a special section of the organisation plan for civil protection response (ORSEC plan). The PPI foresees the necessary measures and means for crisis management during the first hours following the accident and is triggered by the Department Prefect according to the information provided by the facility operator. Its aim is to protect the populations leaving within 10 km of the facility against a potential radiological hazard. The PPI describes: the facility, the intervention area, the protection measures for the population, the conditions of emergency plan triggering, the crisis organisation, the action forms of the different services, and the post-accident stage. This document is the public version of the Particular intervention plan of the Civaux nuclear power plant (Vienne, France)

  9. HANFORD TANK WASTE OPERATIONS SIMULATOR VERSION DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    ALLEN, G.K.

    2003-01-01

    This document describes the software version controls established for the Hanford Tank Waste Operations Simulator (HTWOS). It defines: the methods employed to control the configuration of HTWOS; the version of each of the 26 separate modules for the version 1.0 of HTWOS; the numbering rules for incrementing the version number of each module; and a requirement to include module version numbers in each case results documentation. Version 1.0 of HTWOS is the first version under formal software version control. HTWOS contains separate revision numbers for each of its 26 modules. Individual module version numbers do not reflect the major release HTWOS configured version number

  10. 77 FR 42076 - Notice of Opportunity for Public Comment on Surplus Property Release at Hancock County-Bar Harbor...

    Science.gov (United States)

    2012-07-17

    ... Comment on Surplus Property Release at Hancock County-Bar Harbor Airport, Trenton, ME AGENCY: Federal... located at Hancock County-Bar Harbor Airport, Trenton, Maine. DATES: Comments must be received on or... INFORMATION: The Federal Aviation Administration is reviewing a request by Hancock County-Bar Harbor Airport...

  11. 77 FR 30047 - Notice of Opportunity for Public Comment on Surplus Property Release at Michael J Smith Field...

    Science.gov (United States)

    2012-05-21

    ... Comment on Surplus Property Release at Michael J Smith Field, Beaufort, NC AGENCY: Federal Aviation... J Smith Field, be used for aeronautical purposes. DATES: Comments must be received on or before June... property at the Michael J Smith Field. The property consists of one parcel located on the north side of...

  12. The comparison of CAP88-PC version 2.0 versus CAP88-PC version 1.0

    International Nuclear Information System (INIS)

    Yakubovich, B.A.; Klee, K.O.; Palmer, C.R.; Spotts, P.B.

    1997-12-01

    40 CFR Part 61 (Subpart H of the NESHAP) requires DOE facilities to use approved sampling procedures, computer models, or other approved procedures when calculating Effective Dose Equivalent (EDE) values to members of the public. Currently version 1.0 of the approved computer model CAP88-PC is used to calculate EDE values. The DOE has upgraded the CAP88-PC software to version 2.0. This version provides simplified data entry, better printing characteristics, the use of a mouse, and other features. The DOE has developed and released version 2.0 for testing and comment. This new software is a WINDOWS based application that offers a new graphical user interface with new utilities for preparing and managing population and weather data, and several new decay chains. The program also allows the user to view results before printing. This document describes a test that confirmed CAP88-PC version 2.0 generates results comparable to the original version of the CAP88-PC program

  13. PVWatts Version 5 Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2014-09-01

    The NREL PVWatts calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes includes several built-in parameters that are hidden from the user. This technical reference describes the sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimate. This reference is applicable to the significantly revised version of PVWatts released by NREL in 2014.

  14. Recommendations for the drafting of annual reports of public information related to nuclear base installations - Guide nr 3, Release of the 20/10/2010

    International Nuclear Information System (INIS)

    2010-01-01

    After a recall of the regulatory context and references, this guide proposes a set of recommendations aiming at a better transparency of information in the nuclear sector. It contains general recommendations (notably making the report accessible to a large public, writing a document per site, limiting the size of reports, adopting a common plan for each report), proposes a typical plan (description of installations, measures related to nuclear security and radiation protection, incidents and accidents, releases, management of radioactive wastes and products, other risks and pollutions, actions regarding transparency and information, recommendations by the CHSCT), and addresses the report diffusion

  15. Malicious release of radioactive materials in urban area. Exposure of the public and emergency staff, protective measures

    International Nuclear Information System (INIS)

    Koch, Wolfgang; Lange, Florentin

    2016-01-01

    The preparedness for hypothetical radiological scenarios is part of the tasks for governmental authorities, safety and emergency organizations and the staff in case of the incident. The EURATOM guideline for radiation protection has to be implemented into national laws. According to the guidelines it is required that emergency planning has to be prepared for hypothetical radiological scenarios including terroristic or other maliciously motivated attacks using radioactive materials. The study includes assumptions on the released respirable radioactivity, restriction of the hazardous area, wind induced re-suspension of radioactive dusts and inhalation exposure, and mitigation measures.

  16. The Radiological Impact of 210Pb and 210Po Released from the Iron- and Steel-Making Plant ILVA in Taranto (Italy on the Environment and the Public

    Directory of Open Access Journals (Sweden)

    Guogang Jia

    2013-01-01

    Full Text Available Lead-210 and 210Po are naturally occurring radionuclides. Due to volatile characteristic of lead and polonium, environmental pollution of 210Pb and 210Po released from the coal power plant, steel-making industry and refractory material industry has been an exposure problem for the members of public. In this paper studies on the activity concentrations of 210Po and 210Pb in the raw materials, dust particles, surficial soils and atmospheric particulate samples collected in the area of the Iron- and Steel-Making Plant ILVA Taranto (Italy were made. These data have been used to evaluate the source-term, distributions, inventories, mass balance, biological availability, ecological migration processes and public exposure risk of 210Pb and 210Po in the concerned environment.

  17. Integration of ROOT Notebooks as a Web-based ATLAS Analysis tool for public data releases and outreach

    CERN Document Server

    Banda, Tea; CERN. Geneva. EP Department

    2016-01-01

    The project consists in the initial development of ROOT notebooks for a Z boson analysis in C++ programming language that will allow students and researches to perform fast and very useful data analysis, using ATLAS public data and Monte- Carlo simulations. Several tools are considered: ROOT Data Analysis Frame- work, Jupyter Notebook Technology and CERN-ROOT computing service so-called SWAN.

  18. Slow-release carbohydrates: growing evidence on metabolic responses and public health interest. Summary of the symposium held at the 12th European Nutrition Conference (FENS 2015

    Directory of Open Access Journals (Sweden)

    Sophie Vinoy

    2016-07-01

    Full Text Available To draw attention to the necessity of considering differences in the digestibility of carbohydrates, and more specifically of starch, a symposium was held at the 12th European Nutrition Conference (FENS, which took place in Berlin from October 20 to 23, 2015. The purpose of this session was to present the consolidated knowledge and recent advances regarding the relationship between slow-release carbohydrates, metabolic responses, and public health issues. Three main topics were presented: 1 the definition of, sources of, and recognised interest in the glycaemic response to slowly digestible starch (SDS; 2 clinical evidence regarding the physiological effects of slow-release carbohydrates from cereal foods; and 3 interest in reducing the postprandial glycaemic response to help prevent metabolic diseases. Foods with the highest SDS content induce the lowest glycaemic responses, as the starch is protected from gelatinisation during processing. In humans, high-SDS food consumption induces slower glucose release, lower postprandial insulinaemia, and stimulation of gut hormones. Moreover, postprandial hyperglycaemia is an independent risk factor for type two diabetes mellitus (T2DM and cardiovascular disease (CVD. Therefore, given the plausible aetiologic mechanisms, we argue that postprandial glucose levels are relevant for health and disease and represent a meaningful target for intervention, for example, through dietary factors. This symposium was organised by Mondelez International R&D.

  19. Slow-release carbohydrates: growing evidence on metabolic responses and public health interest. Summary of the symposium held at the 12th European Nutrition Conference (FENS 2015).

    Science.gov (United States)

    Vinoy, Sophie; Laville, Martine; Feskens, Edith J M

    2016-01-01

    To draw attention to the necessity of considering differences in the digestibility of carbohydrates, and more specifically of starch, a symposium was held at the 12th European Nutrition Conference (FENS), which took place in Berlin from October 20 to 23, 2015. The purpose of this session was to present the consolidated knowledge and recent advances regarding the relationship between slow-release carbohydrates, metabolic responses, and public health issues. Three main topics were presented: 1) the definition of, sources of, and recognised interest in the glycaemic response to slowly digestible starch (SDS); 2) clinical evidence regarding the physiological effects of slow-release carbohydrates from cereal foods; and 3) interest in reducing the postprandial glycaemic response to help prevent metabolic diseases. Foods with the highest SDS content induce the lowest glycaemic responses, as the starch is protected from gelatinisation during processing. In humans, high-SDS food consumption induces slower glucose release, lower postprandial insulinaemia, and stimulation of gut hormones. Moreover, postprandial hyperglycaemia is an independent risk factor for type two diabetes mellitus (T2DM) and cardiovascular disease (CVD). Therefore, given the plausible aetiologic mechanisms, we argue that postprandial glucose levels are relevant for health and disease and represent a meaningful target for intervention, for example, through dietary factors. This symposium was organised by Mondelez International R&D.

  20. Assessment of the Public Health impact from the accidental release of UF6 at the Sequoyah Fuels Corporation Facility at Gore, Oklahoma (Docket No. 40-8027). Volume 2

    International Nuclear Information System (INIS)

    1986-03-01

    Following the accidental release of UF 6 from the Sequoyah Fuels Facility on January 4, 1986, an Ad Hoc Interagency Public Health Assessment Task Force was established. The Task Force consists of technical staff members from various agencies who have prepared this assessment of the public health impact associated with the accidental release. Volume 2 of the report contains Appendices which provide more detailed information used in the assessment and support the discussion in Volume 1

  1. Integration of ROOT Notebooks as a Web-based ATLAS Analysis tool for Public Data Releases and Outreach

    CERN Document Server

    Abah, Anthony

    2016-01-01

    The project worked on the development of a physics analysis and its software under ROOT framework and Jupyter notebooks for the the ATLAS Outreach and the Naples teams. This analysis is created in the context of the release of data and Monte Carlo samples by the ATLAS collaboration. The project focuses on the enhancement of the recent opendata.atlas.cern web platform to be used as educational resources for university students and new researches. The generated analysis structure and tutorials will be used to extend the participation of students from other locations around the World. We conclude the project with the creation of a complete notebook representing the so-called W analysis in C + + language for the mentioned platform.

  2. Publicity.

    Science.gov (United States)

    Chisholm, Joan

    Publicity for preschool cooperatives is described. Publicity helps produce financial support for preschool cooperatives. It may take the form of posters, brochures, newsletters, open house, newspaper coverage, and radio and television. Word of mouth and general good will in the community are the best avenues of publicity that a cooperative nursery…

  3. TOUGH2 User's Guide Version 2

    International Nuclear Information System (INIS)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-01-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data

  4. Emergency planning and the Control of Major Accident Hazards (COMAH/Seveso II) Directive: An approach to determine the public safety zone for toxic cloud releases

    International Nuclear Information System (INIS)

    O'Mahony, Mary T.; Doolan, Donal; O'Sullivan, Alice; Hession, Michael

    2008-01-01

    The EU Control of Major Accidents Hazards Directive (Seveso II) requires an external emergency plan for each top tier site. This paper sets out a method to build the protection of public health into emergency planning for Seveso sites in the EU. The method involves the review of Seveso site details prescribed under the directive. The site safety report sets out the potential accident scenarios. The safety report's worst-case scenario, and chemical involved, is used as the basis for the external emergency plan. A decision was needed on the appropriate threshold value to use as the level of concern to protect public health. The definitions of the regulatory standards (air quality standards and occupational standards) in use were studied, how they are derived and for what purpose. The 10 min acute exposure guideline level (AEGL) for a chemical is recommended as the threshold value to inform decisions taken to protect public health from toxic cloud releases. The area delimited by AEGL 1 defines the population who may be concerned about being exposed. They need information based on comprehensive risk assessment. The area delimited by AEGL 2 defines the population for long-term surveillance when indicated and may include first responders. The area delimited by AEGL 3 defines the population who may present acutely to the medical services. It ensures that the emergency responders site themselves safely. A standard methodology facilitates discussions with plant operators and concerned public. Examples show how the methodology can be adapted to suit explosive risk and response to fire

  5. A review of public concerns and reactions about food safety following a release of food contaminants (radioactive or otherwise)

    International Nuclear Information System (INIS)

    Lambert, B.

    1999-01-01

    This study was carried out, by questionnaire and personal interview, to assess the extent of the public's knowledge of the procedures employed by MAFF, and other agencies following a food contamination incident involving radioactive contamination. It was also designed to gauge the public's perception of relative risk from routine discharges into the environment and other agents. The study populations were located in 5 locations - 3 near nuclear facilities, and 2 control groups (1 close to a potential chemical polluting plant). The study was not intended to be rigorous (in terms of sex, age and socio-economic group) in random selection of subjects for interview but it was judged that a fairly representative selection of views was obtained from about 50 people at each location. Overall, and importantly, although about 60% claimed that some their diet was locally grown, most people even in these rural areas purchased nearly all of their food and milk in supermarkets. It was difficult to get the interviewees to take the concept of a large incident involving food bans seriously but they seemed to expect the local authority and the police to be prominent in announcing the news. They did not seem to have much confidence in the broadcast media but, when prompted, thought that a MAFF 'hot-line' would be of greatest use in obtaining on-going information. House to house leaf letting was also mentioned as an effective means of disseminating information. Every-one seemed to want more clear information about food contamination in advance of it becoming a real problem - although how they would react to this information was not clear. All groups were fairly conservative when asked about personal risk but became more extreme over risks to society as a whole, particularly in relation to transport and the environment. Overall, as expected, the public perception of relative risk was somewhat divorced from reality. Because of their geographical location and confidents, the study group

  6. version 10

    African Journals Online (AJOL)

    lviljoen

    In South Africa, 70% of the country's population is dependent on the public health care sector ... (231.23% more than the actual budget allocation) is needed for the optimal functioning .... on average 98% or R214.8-billion of their adjusted bud- ... achieve better control and estimation of projected ... stratified sampling system.

  7. SPEEDI: a computer code system for the real-time prediction of radiation dose to the public due to an accidental release

    International Nuclear Information System (INIS)

    Imai, Kazuhiko; Chino, Masamichi; Ishikawa, Hirohiko

    1985-10-01

    SPEEDI, a computer code system for prediction of environmental doses from radioactive materials accidentally released from a nuclear plant has been developed to assist the organizations responsible for an emergency planning. For realistic simulation, have been developed a model which statistically predicts the basic wind data and then calculates the three-dimensional mass consistent wind field by interpolating these predicted data, and a model for calculation of the diffusion of released materials using a combined model of random-walk and PICK methods. These calculation in the system is carried out in conversational mode with a computer so that we may use the system with ease in an emergency. SPEEDI has also versatile files, which make it easy to control the complicated flows of calculation. In order to attain a short computation time, a large-scale computer with performance of 25 MIPS and a vector processor of maximum 250 MFLOPS are used for calculation of the models so that quick responses have been made. Simplified models are also prepared for calculation in a minicomputer widely used by local governments and research institutes, although the precision of calculation as same with the above models can not be expected to obtain. The present report outlines the structure and functions of SPEEDI, methods for prediction of the wind field and the models for calculation of the concentration of released materials in air and on the ground, and the doses to the public. Some of the diffusion models have been compared with the field experiments which had been carried out as a part of the SPEEDI development program. The report also discusses the reliability of the diffusion models on the basis of the compared results, and shows that they can reasonably simulate the diffusion in the internal boundary layer which commonly occurs near the coastal region. (J.P.N.)

  8. The Citadel of Alessandria: Values and strategies involved in the process of releasing from the public ownership

    Directory of Open Access Journals (Sweden)

    Cristina Coscia

    2015-06-01

    Full Text Available The issues concerning the valorization of assets state property, their management and financial rebalancing through a careful policy of disposals and growth of profitability. These dynamics, through the grant or lease to third parties, have been expanding and pay increasing attention to issues of public finance. A radical change of perspective has started in the evaluation of the role of asset management in the field of local authorities. The heritage is no longer considered static, but dynamic; it is gained as a strategic asset in the overall financial management. Local governments make use of this to ensure their service delivery goals and to maximize the well-being of the community. The asset of Defense Ministry transferred to the State Property Office, offers important opportunities for development: not only properties to insert in the real estate market for monetary returns profits to help the Local Governments finance (strategy that did not lead to the desired results, but also opportunities to initiate processes of valorization affecting the industrial area and the surrounding geographical area. In this sense, the case of the Citadel of Alessandria becomes a paradigmatic work to simulate technical decision making application to simulate applications (SWOT, Analytic Hierarchy Process, Analytic Network Process, etc.. Regarding the process and tools that can act as support in delineating the most compatible functional scenario.

  9. Proposed new regulations for the limitation of releases of radioactive substances from nuclear power stations with light water reactors

    International Nuclear Information System (INIS)

    1975-07-01

    In this publication the Swedish National Institute of Radiation Protection presents a proposed version of new regulations concerning the way in which the release of radioactive substances from nuclear power stations is to be limited. The regulations come into force on 1st January 1976. (Auth.)

  10. GENII Version 2 Users’ Guide

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.

    2004-03-08

    The GENII Version 2 computer code was developed for the Environmental Protection Agency (EPA) at Pacific Northwest National Laboratory (PNNL) to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) and the radiological risk estimating procedures of Federal Guidance Report 13 into updated versions of existing environmental pathway analysis models. The resulting environmental dosimetry computer codes are compiled in the GENII Environmental Dosimetry System. The GENII system was developed to provide a state-of-the-art, technically peer-reviewed, documented set of programs for calculating radiation dose and risk from radionuclides released to the environment. The codes were designed with the flexibility to accommodate input parameters for a wide variety of generic sites. Operation of a new version of the codes, GENII Version 2, is described in this report. Two versions of the GENII Version 2 code system are available, a full-featured version and a version specifically designed for demonstrating compliance with the dose limits specified in 40 CFR 61.93(a), the National Emission Standards for Hazardous Air Pollutants (NESHAPS) for radionuclides. The only differences lie in the limitation of the capabilities of the user to change specific parameters in the NESHAPS version. This report describes the data entry, accomplished via interactive, menu-driven user interfaces. Default exposure and consumption parameters are provided for both the average (population) and maximum individual; however, these may be modified by the user. Source term information may be entered as radionuclide release quantities for transport scenarios, or as basic radionuclide concentrations in environmental media (air, water, soil). For input of basic or derived concentrations, decay of parent radionuclides and ingrowth of radioactive decay products prior to the start of the exposure scenario may be considered. A single code run can

  11. CERT (registered trademark) Resilience Management Model (CERT (registered trademark)-RMM) V1.1: NIST Special Publication Crosswalk Version 2

    Science.gov (United States)

    2014-06-01

    27000 series, COBIT, the British Standards Institution’s BS 25999, and ISO 24762  includes quantitative process measurements that can be used to...the NIST special publications 800 series, the International Organization for Standards ( ISO ) and International Electrotechnical Commission (IEC

  12. EJSCREEN Indexes--2016 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — EJSCREEN is an environmental justice (EJ) screening and mapping tool that provides EPA with a nationally consistent dataset and methodology for calculating "EJ...

  13. EJSCREEN Indexes--2017 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — EJSCREEN is an environmental justice (EJ) screening and mapping tool that provides EPA with a nationally consistent dataset and methodology for calculating "EJ...

  14. EJSCREEN Data--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — EJSCREEN is an environmental justice (EJ) screening and mapping tool that provides EPA with a nationally consistent dataset and methodology for calculating "EJ...

  15. The 2017 Release Cloudy

    Science.gov (United States)

    Ferland, G. J.; Chatzikos, M.; Guzmán, F.; Lykins, M. L.; van Hoof, P. A. M.; Williams, R. J. R.; Abel, N. P.; Badnell, N. R.; Keenan, F. P.; Porter, R. L.; Stancil, P. C.

    2017-10-01

    We describe the 2017 release of the spectral synthesis code Cloudy, summarizing the many improvements to the scope and accuracy of the physics which have been made since the previous release. Exporting the atomic data into external data files has enabled many new large datasets to be incorporated into the code. The use of the complete datasets is not realistic for most calculations, so we describe the limited subset of data used by default, which predicts significantly more lines than the previous release of Cloudy. This version is nevertheless faster than the previous release, as a result of code optimizations. We give examples of the accuracy limits using small models, and the performance requirements of large complete models. We summarize several advances in the H- and He-like iso-electronic sequences and use our complete collisional-radiative models to establish the densities where the coronal and local thermodynamic equilibrium approximations work.

  16. The internet trade of counterfeit spirits in Russia – an emerging problem undermining alcohol, public health and youth protection policies? [version 2; referees: 2 approved

    OpenAIRE

    Maria Neufeld; Dirk W. Lachenmeier; Stephan G. Walch; Jürgen Rehm

    2017-01-01

    Counterfeit alcohol belongs to the category of unrecorded alcohol not reflected in official statistics. The internet trade of alcoholic beverages has been prohibited by the Russian Federation since 2007, but various sellers still offer counterfeit spirits (i.e., forged brand spirits) over the internet to Russian consumers, mostly in a non-deceptive fashion at prices up to 15 times lower than in regular sale. The public health issues arising from this unregulated trade include potential harm t...

  17. The internet trade of counterfeit spirits in Russia – an emerging problem undermining alcohol, public health and youth protection policies? [version 1; referees: 2 approved

    OpenAIRE

    Maria Neufeld; Dirk W. Lachenmeier; Stephan G. Walch; Jürgen Rehm

    2017-01-01

    Counterfeit alcohol belongs to the category of unrecorded alcohol not reflected in official statistics. The internet trade of alcoholic beverages has been prohibited by the Russian Federation since 2007, but various sellers still offer counterfeit spirits (i.e., forged brand spirits) over the internet to Russian consumers, mostly in a non-deceptive fashion at prices up to 15 times lower than in regular sale. The public health issues arising from this unregulated trade include potential harm t...

  18. Public relations

    International Nuclear Information System (INIS)

    1997-01-01

    Nuclear Regulatory Authority of the Slovak Republic (NRA SR) started building up a broad information publicity conception resulting in NRA SR Information Centre establishment in 1995. The Centre provides information on the NRA SR activities. The Authority's speaker provides information about NRA SR domestic and foreign activities for TASR, newspapers, Slovak radio and television. Information on nuclear energy facilities situation is given to state authorities, organizations as well as to domestic and foreign mass-media on request. 41 press releases, 3 radio interviews and 5 television records providing information on some important NRA SR events was worked out in 1996. 4 basic NRA SR document have been presented by the Slovak Information Agency, consequently 3 press-conferences were held. Concerning some less frequent communication activities, NRA SR can present the NRA SR annual report in three versions (for the Slovak Government, for public and detailed report for experts). NRA SR and State Authority for Nuclear Safety of the Czech Republic issue together Nuclear Energy Safety News every two months. NRA SR activities Bulletin started issuing in 1996 3 to 4 volumes per year. Newspaper, radio and television news monitoring is performed for Bratislava and Trnava offices providing interesting papers or important events records and photos of NRA SR visits. Practical experience of the information activities performance in connection with the Authority mission and liability was obtained last year. Methodical and organizational guidelines to adjust the state regulatory authority activities in this field have been prepared

  19. Lightning Injury is a disaster in Bangladesh? - Exploring its magnitude and public health needs [version 1; referees: 3 approved, 1 approved with reservations

    Directory of Open Access Journals (Sweden)

    Animesh Biswas

    2016-12-01

    Full Text Available Background: Lightning injury is a global public health issue. Low and middle-income countries in the tropical and subtropical regions of the world are most affected by lightning. Bangladesh is one of the countries at particular risk, with a high number of devastating lightning injuries in the past years, causing high mortality and morbidity. The exact magnitude of the problem is still unknown and therefore this study investigates the epidemiology of lightning injuries in Bangladesh, using a national representative sample. Methods: A mixed method was used. The study is based on results from a nationwide cross-sectional survey performed in 2003 in twelve randomly selected districts. In the survey, a total of 819,429 respondents from 171,336 households were interviewed using face-to-face interviews. In addition, qualitative information was obtained by reviewing national and international newspaper reports of lightning injuries sustained in Bangladesh between 13 and 15 May 2016. Results: The annual mortality rate was 3.661 (95% CI 0.9313–9.964 per 1,000,000 people. The overall incidence of lightning injury was 19.89/100,000 people. Among the victims, 60.12% (n=98 were males and 39.87% (n=65 were females. Males were particularly vulnerable, with a 1.46 times increased risk compared with females (RR 1.46, 95% CI 1.06–1.99. Rural populations were more vulnerable, with a 8.73 times higher risk, than urban populations (RR 8.73, 95% CI 5.13–14.86. About 43% of injuries occurred between 12 noon and 6 pm. The newspapers reported 81 deaths during 2 days of electric storms in 2016. Lightning has been declared a natural disaster in Bangladesh. Conclusions: The current study indicates that lightning injuries are a public health problem in Bangladesh. The study recommends further investigations to develop interventions to reduce lightning injuries, mortality and related burden in Bangladesh.

  20. Montage Version 3.0

    Science.gov (United States)

    Jacob, Joseph; Katz, Daniel; Prince, Thomas; Berriman, Graham; Good, John; Laity, Anastasia

    2006-01-01

    The final version (3.0) of the Montage software has been released. To recapitulate from previous NASA Tech Briefs articles about Montage: This software generates custom, science-grade mosaics of astronomical images on demand from input files that comply with the Flexible Image Transport System (FITS) standard and contain image data registered on projections that comply with the World Coordinate System (WCS) standards. This software can be executed on single-processor computers, multi-processor computers, and such networks of geographically dispersed computers as the National Science Foundation s TeraGrid or NASA s Information Power Grid. The primary advantage of running Montage in a grid environment is that computations can be done on a remote supercomputer for efficiency. Multiple computers at different sites can be used for different parts of a computation a significant advantage in cases of computations for large mosaics that demand more processor time than is available at any one site. Version 3.0 incorporates several improvements over prior versions. The most significant improvement is that this version is accessible to scientists located anywhere, through operational Web services that provide access to data from several large astronomical surveys and construct mosaics on either local workstations or remote computational grids as needed.

  1. School version of ESTE EU

    International Nuclear Information System (INIS)

    Carny, P.; Suchon, D.; Chyly, M.; Smejkalova, E.; Fabova, V.

    2008-01-01

    ESTE EU is information system and software for radiological impacts assessment to the territory of the country in case of radiation accident inside/outside of the country .The program enables to model dispersion of radioactive clouds in small-scale and meso-scale. The system enables the user to estimate prediction of the source term (release to the atmosphere ) for any point of radiation/nuclear accident in Europe (for any point of the release, but especially for the sites of European power reactors ). The system enables to utilize results of real radiological monitoring in the process of source term estimation. Radiological impacts of release to the atmosphere are modelled and calculated across the Europe and displayed in the geographical information system (GIS). The school version of ESTE EU is intended for students of the universities which are interested in or could work in the field of emergency response, radiological and nuclear accidents, dispersion modelling, radiological impacts calculation and urgent or preventive protective measures implementation. The school version of ESTE EU is planned to be donated to specialized departments of faculties in Slovakia, Czech Republic, etc. System can be fully operated in Slovak, Czech or English language. (authors)

  2. School version of ESTE EU

    International Nuclear Information System (INIS)

    Carny, P.; Suchon, D.; Chyly, M.; Smejkalova, E.; Fabova, V.

    2009-01-01

    ESTE EU is information system and software for radiological impacts assessment to the territory of the country in case of radiation accident inside/outside of the country .The program enables to model dispersion of radioactive clouds in small-scale and meso-scale. The system enables the user to estimate prediction of the source term (release to the atmosphere ) for any point of radiation/nuclear accident in Europe (for any point of the release, but especially for the sites of European power reactors ). The system enables to utilize results of real radiological monitoring in the process of source term estimation. Radiological impacts of release to the atmosphere are modelled and calculated across the Europe and displayed in the geographical information system (GIS). The school version of ESTE EU is intended for students of the universities which are interested in or could work in the field of emergency response, radiological and nuclear accidents, dispersion modelling, radiological impacts calculation and urgent or preventive protective measures implementation. The school version of ESTE EU is planned to be donated to specialized departments of faculties in Slovakia, Czech Republic, etc. System can be fully operated in Slovak, Czech or English language. (authors)

  3. The internet trade of counterfeit spirits in Russia – an emerging problem undermining alcohol, public health and youth protection policies? [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Maria Neufeld

    2017-06-01

    Full Text Available Counterfeit alcohol belongs to the category of unrecorded alcohol not reflected in official statistics. The internet trade of alcoholic beverages has been prohibited by the Russian Federation since 2007, but various sellers still offer counterfeit spirits (i.e., forged brand spirits over the internet to Russian consumers, mostly in a non-deceptive fashion at prices up to 15 times lower than in regular sale. The public health issues arising from this unregulated trade include potential harm to underage drinkers, hazards due to toxic ingredients such as methanol, but most importantly alcohol harms due to potentially increased drinking volumes due to low prices and high availability on the internet. The internet sale also undermines existing alcohol policies such as restrictions of sale locations, sale times and minimum pricing. The need to enforce measures against counterfeiting of spirits, but specifically their internet trade should be implemented as key elements of alcohol policies to reduce unrecorded alcohol consumption, which is currently about 33 % of total consumption in Russia.

  4. The internet trade of counterfeit spirits in Russia – an emerging problem undermining alcohol, public health and youth protection policies? [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Maria Neufeld

    2017-04-01

    Full Text Available Counterfeit alcohol belongs to the category of unrecorded alcohol not reflected in official statistics. The internet trade of alcoholic beverages has been prohibited by the Russian Federation since 2007, but various sellers still offer counterfeit spirits (i.e., forged brand spirits over the internet to Russian consumers, mostly in a non-deceptive fashion at prices up to 15 times lower than in regular sale. The public health issues arising from this unregulated trade include potential harm to underage drinkers, hazards due to toxic ingredients such as methanol, but most importantly alcohol harms due to potentially increased drinking volumes due to low prices and high availability on the internet. The internet sale also undermines existing alcohol policies such as restrictions of sale locations, sale times and minimum pricing. The need to enforce measures against counterfeiting of spirits, but specifically their internet trade should be implemented as key elements of alcohol policies to reduce unrecorded alcohol consumption, which is currently about 33 % of total consumption in Russia.

  5. Solar Access to Public Capital (SAPC) Working Group: Best Practices in PV System Installation; Version 1.0, March 2015; Period of Performance, October 2014 - September 2015

    Energy Technology Data Exchange (ETDEWEB)

    Doyle, C. [IBTS and Dividend Solar, Austin, TX (United States). Dividend Solar; Truitt, A. [Acuity Power Group, Denver, CO (United States); Inda, D. [Clean Power Finance, San Francisco, CA (United States); Lawrence, R. [North American Board of Certified Energy Practitioners, Clifton Park, NY (United States); Lockhart, R. [Acuity Power Group, Wellesley Hills, MA (United States); Golden, M. [Efficiency.org and IBTS, Sausalito, CA (United States)

    2015-03-01

    The following Photovoltaics Installation Best Practices Guide is one of several work products developed by the Solar Access to Public Capital (SAPC) working group, which works to open capital market investment. SAPC membership includes over 450 leading solar developers, financiers and capital managers, law firms, rating agencies, accounting and engineering firms, and other stakeholders engaged in solar asset deployment. SAPC activities are directed toward foundational elements necessary to pool project cash flows into tradable securities: standardization of power purchase and lease contracts for residential and commercial end customers; development of performance and credit data sets to facilitate investor due diligence activities; comprehension of risk perceived by rating agencies; and the development of best practice guides for PV system installation and operations and maintenance (O&M) in order to encourage high-quality system deployment and operation that may improve lifetime project performance and energy production. This PV Installation Best Practices Guide was developed through the SAPC Installation Best Practices subcommittee, a subgroup of SAPC comprised of a wide array of solar industry leaders in numerous fields of practice. The guide was developed over roughly one year and eight months of direct engagement by the subcommittee and two working group comment periods.

  6. Sellafield (release of radioactivity)

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, J; Goodlad, A; Morris, M

    1986-02-06

    A government statement is reported, about the release of plutonium nitrate at the Sellafield site of British Nuclear Fuels plc on 5 February 1986. Matters raised included: details of accident; personnel monitoring; whether radioactive material was released from the site; need for public acceptance of BNFL activities; whether plant should be closed; need to reduce level of radioactive effluent; number of incidents at the plant.

  7. East Asian Seas Regional Climatology Version 2.0 from 1804 to 2014 (NODC Accession 0123300)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The East Asian Seas Regional Climatology Version 2.0 is an update to the preliminary version released in May 2012. This update includes new temperature and salinity...

  8. Particle and heavy ion transport code system, PHITS, version 2.52

    International Nuclear Information System (INIS)

    Sato, Tatsuhiko; Matsuda, Norihiro; Hashimoto, Shintaro; Iwamoto, Yosuke; Noda, Shusaku; Ogawa, Tatsuhiko; Nakashima, Hiroshi; Fukahori, Tokio; Okumura, Keisuke; Kai, Tetsuya; Niita, Koji; Iwase, Hiroshi; Chiba, Satoshi; Furuta, Takuya; Sihver, Lembit

    2013-01-01

    An upgraded version of the Particle and Heavy Ion Transport code System, PHITS2.52, was developed and released to the public. The new version has been greatly improved from the previously released version, PHITS2.24, in terms of not only the code itself but also the contents of its package, such as the attached data libraries. In the new version, a higher accuracy of simulation was achieved by implementing several latest nuclear reaction models. The reliability of the simulation was improved by modifying both the algorithms for the electron-, positron-, and photon-transport simulations and the procedure for calculating the statistical uncertainties of the tally results. Estimation of the time evolution of radioactivity became feasible by incorporating the activation calculation program DCHAIN-SP into the new package. The efficiency of the simulation was also improved as a result of the implementation of shared-memory parallelization and the optimization of several time-consuming algorithms. Furthermore, a number of new user-support tools and functions that help users to intuitively and effectively perform PHITS simulations were developed and incorporated. Due to these improvements, PHITS is now a more powerful tool for particle transport simulation applicable to various research and development fields, such as nuclear technology, accelerator design, medical physics, and cosmic-ray research. (author)

  9. The Health of the Public Charter School Movement: A State-by-State Analysis. Second Edition

    Science.gov (United States)

    Ziebarth, Todd; Bierlein Palmer, Louann

    2016-01-01

    In October 2014, the first edition of "The Health of the Public Charter School Movement: A State-by-State Analysis" was released. Both encouraging words and constructive criticism for how to improve the report going forward were received. This second edition builds on the solid foundation of the inaugural version, while making…

  10. Zombies—A Pop Culture Resource for Public Health Awareness

    Centers for Disease Control (CDC) Podcasts

    2013-04-24

    Reginald Tucker reads an abridged version of the Emerging Infectious Diseases Another Dimension, Zombies—A Pop Culture Resource for Public Health Awareness.  Created: 4/24/2013 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 4/24/2013.

  11. Assessment of the public health impact from the accidental release of UF6 at the Sequoyah Fuels Corporation Facility at Gore, Oklahoma (Docket No. 40-8027, License No. SUB-1010). Main report. Volume 1

    International Nuclear Information System (INIS)

    1986-03-01

    Following the accidental release of UF 6 from the Sequoyah Fuels Facility on January 4, 1986, an Ad Hoc Interagency Public Health Assessment Task Force was established. The Task Force consists of technical staff members from various agencies who have prepared this assessment of the public health impact associated with the accidental release. The assessment consists of two volumes and is based on data from the accident available as of February 14, 1986. Volume 1 of the report describes the effects from the intake of uranium and fluoride and summarizes the findings and recommendations of the Task Force. Volume 2 of the report contains Appendices which provide more detailed information used in the assessment and support the discussion in Volume 1. 57 refs., 26 figs., 12 tabs

  12. Global Historical Climatology Network - Monthly Temperature, Version 4 (BETA)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Only available as BETA release. The GHCN-Monthly Temperature Version 4 dataset consists of monthly mean temperature - both raw and bias corrected data. A full...

  13. TOUGH2 User's Guide Version 2

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-11-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data.

  14. HALE UAS Concept of Operations. Version 3.0

    Science.gov (United States)

    2006-01-01

    This document is a system level Concept of Operations (CONOPS) from the perspective of future High Altitude Long Endurance (HALE) Unmanned Aircraft Systems (UAS) service providers and National Airspace System (NAS) users. It describes current systems (existing UAS), describes HALE UAS functions and operations to be performed (via sample missions), and offers insight into the user s environment (i.e., the UAS as a system of systems). It is intended to be a source document for NAS UAS operational requirements, and provides a construct for government agencies to use in guiding their regulatory decisions, architecture requirements, and investment strategies. Although it does not describe the technical capabilities of a specific HALE UAS system (which do, and will vary widely), it is intended to aid in requirements capture and to be used as input to the functional requirements and analysis process. The document provides a basis for development of functional requirements and operational guidelines to achieve unrestricted access into the NAS. This document is an FY06 update to the FY05 Access 5 Project-approved Concept of Operations document previously published in the Public Domain on the Access 5 open website. This version is recommended to be approved for public release also. The updates are a reorganization of materials from the previous version with the addition of an updated set of operational requirements, inclusion of sample mission scenarios, and identification of roles and responsibilities of interfaces within flight phases.

  15. The ESA/ESO/NASA Photoshop fits Liberator Version 2

    Science.gov (United States)

    Christensen, L. L.; Nielsen, L. H.; Nielsen, K. K.; Johansen, T.

    2005-12-01

    Since the fi rst version of the FITS Liberator software was released on the 8th July 2004 more than 50,000 people worldwide have looked over the scientists' shoulders and worked with digital images from telescopes in space and on the ground themselves. In this way the Liberator has become the `industry standard' for the production of astronomical colour images. The new version 2 of the software has recently been released and opens up a signifi cant number of new possibilities.

  16. Sexual Capital in the Public Version

    Directory of Open Access Journals (Sweden)

    Hanna Steppa

    2014-01-01

    Full Text Available The main intention of Samuel Nowak—the author of Sexual Capital—is to define “what the mass media are for men labelling themselves as gay, taking into account various, although always treated collectively, contexts: economic, political and medial”(p. 9. The sub-title of the study, which defines the direction of the whole text, is Wyobrażone wspólnotysmaku i medialne tożsamości polskich gejów (“Imagined Communities of Taste and Medial Identities of Polish Gay Persons”. In the Nowak’s study, important is the evaluation from outside (as viewed by science and from within (as viewed by proponents of LGBT. The critical review of Sexual Capital is compatible with the structure of the original text: originally focuses on scientific theories in order to end with the examples from Polish medial realities.

  17. Drinking Water Mapping Application (DWMA) - Public Version

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Drinking Water Mapping Application (DWMA) is a web-based geographic information system (GIS) that enhances the capabilities to identify major contaminant risks...

  18. The National Energy Audit (NEAT) Engineering Manual (Version 6)

    Energy Technology Data Exchange (ETDEWEB)

    Gettings, M.B.

    2001-04-20

    Government-funded weatherization assistance programs resulted from increased oil prices caused by the 1973 oil embargo. These programs were instituted to reduce US consumption of oil and help low-income families afford the increasing cost of heating their homes. In the summer of 1988, Oak Ridge National Laboratory (ORNL) began providing technical support to the Department of Energy (DOE) Weatherization Assistance Program (WAP). A preliminary study found no suitable means of cost-effectively selecting energy efficiency improvements (measures) for single-family homes that incorporated all the factors seen as beneficial in improving cost-effectiveness and usability. In mid-1989, ORNL was authorized to begin development of a computer-based measure selection technique. In November of 1992 a draft version of the program was made available to all WAP state directors for testing. The first production release, Version 4.3, was made available in october of 1993. The Department of Energy's Weatherization Assistance Program has continued funding improvements to the program increasing its user-friendliness and applicability. initial publication of this engineering manual coincides with availability of Version 6.1, November 1997, though algorithms described generally apply to all prior versions. Periodic updates of specific sections in the manual will permit maintaining a relevant document. This Engineering Manual delineates the assumptions used by NEAT in arriving at the measure recommendations based on the user's input of the building characteristics. Details of the actual data entry are available in the NEAT User's Manual (ORNL/Sub/91-SK078/1) and will not be discussed in this manual.

  19. [External cephalic version].

    Science.gov (United States)

    Navarro-Santana, B; Duarez-Coronado, M; Plaza-Arranz, J

    2016-08-01

    To analyze the rate of successful external cephalic versions in our center and caesarean sections that would be avoided with the use of external cephalic versions. From January 2012 to March 2016 external cephalic versions carried out at our center, which were a total of 52. We collected data about female age, gestational age at the time of the external cephalic version, maternal body mass index (BMI), fetal variety and situation, fetal weight, parity, location of the placenta, amniotic fluid index (ILA), tocolysis, analgesia, and newborn weight at birth, minor adverse effects (dizziness, hypotension and maternal pain) and major adverse effects (tachycardia, bradycardia, decelerations and emergency cesarean section). 45% of the versions were unsuccessful and 55% were successful. The percentage of successful vaginal delivery in versions was 84% (4% were instrumental) and 15% of caesarean sections. With respect to the variables studied, only significant differences in birth weight were found; suggesting that birth weight it is related to the outcome of external cephalic version. Probably we did not find significant differences due to the number of patients studied. For women with breech presentation, we recommend external cephalic version before the expectant management or performing a cesarean section. The external cephalic version increases the proportion of fetuses in cephalic presentation and also decreases the rate of caesarean sections.

  20. Versioning Complex Data

    Energy Technology Data Exchange (ETDEWEB)

    Macduff, Matt C.; Lee, Benno; Beus, Sherman J.

    2014-06-29

    Using the history of ARM data files, we designed and demonstrated a data versioning paradigm that is feasible. Assigning versions to sets of files that are modified with some special assumptions and domain specific rules was effective in the case of ARM data, which has more than 5000 datastreams and 500TB of data.

  1. FORM version 4.0

    Science.gov (United States)

    Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

    2013-05-01

    We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged

  2. Guidelines for calculating radiation doses to the public from a release of airborne radioactive material under hypothetical accident conditions in nuclear reactors

    International Nuclear Information System (INIS)

    1989-09-01

    This Standard provides guidelines and a methodology for calculating effective doses and thyroid doses to people (either individually or collectively) in the path of airborne radioactive material released from a nuclear facility following a hypothetical accident. The specific radionuclides considered in the Standard are those associated with substances having the greatest potential for becoming airborne in reactor accidents (eg, tritium (HTO), noble gases and their daughters (Kr-Rb, Xe-Cs), and radioiodines (I)); and certain radioactive particulates (eg, Cs, Ru, Sr, Te) that may become airborne under exceptional circumstances

  3. Nuclear criticality safety handbook. Version 2

    International Nuclear Information System (INIS)

    1999-03-01

    The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modelled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision is made based on previous studies for the chapter that treats modelling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, and burnup credit. This revision solves the inconsistencies found in the first version between the evaluation of errors found in JACS code system and criticality condition data that were calculated based on the evaluation. (author)

  4. Version pressure feedback mechanisms for speculative versioning caches

    Science.gov (United States)

    Eichenberger, Alexandre E.; Gara, Alan; O& #x27; Brien, Kathryn M.; Ohmacht, Martin; Zhuang, Xiaotong

    2013-03-12

    Mechanisms are provided for controlling version pressure on a speculative versioning cache. Raw version pressure data is collected based on one or more threads accessing cache lines of the speculative versioning cache. One or more statistical measures of version pressure are generated based on the collected raw version pressure data. A determination is made as to whether one or more modifications to an operation of a data processing system are to be performed based on the one or more statistical measures of version pressure, the one or more modifications affecting version pressure exerted on the speculative versioning cache. An operation of the data processing system is modified based on the one or more determined modifications, in response to a determination that one or more modifications to the operation of the data processing system are to be performed, to affect the version pressure exerted on the speculative versioning cache.

  5. MCNP(trademark) Version 5

    International Nuclear Information System (INIS)

    Cox, Lawrence J.; Barrett, Richard F.; Booth, Thomas Edward; Briesmeister, Judith F.; Brown, Forrest B.; Bull, Jeffrey S.; Giesler, Gregg Carl; Goorley, John T.; Mosteller, Russell D.; Forster, R. Arthur; Post, Susan E.; Prael, Richard E.; Selcow, Elizabeth Carol; Sood, Avneet

    2002-01-01

    The Monte Carlo transport workhorse, MCNP, is undergoing a massive renovation at Los Alamos National Laboratory (LANL) in support of the Eolus Project of the Advanced Simulation and Computing (ASCI) Program. MCNP Version 5 (V5) (expected to be released to RSICC in Spring, 2002) will consist of a major restructuring from FORTRAN-77 (with extensions) to ANSI-standard FORTRAN-90 with support for all of the features available in the present release (MCNP-4C2/4C3). To most users, the look-and-feel of MCNP will not change much except for the improvements (improved graphics, easier installation, better online documentation). For example, even with the major format change, full support for incremental patching will still be provided. In addition to the language and style updates, MCNP V5 will have various new user features. These include improved photon physics, neutral particle radiography, enhancements and additions to variance reduction methods, new source options, and improved parallelism support (PVM, MPI, OpenMP).

  6. Guidelines for calculating radiation doses to the public from a release of airborne radioactive material under hypothetical accident conditions in nuclear reactors

    International Nuclear Information System (INIS)

    1991-04-01

    This standard provides guidelines and a methodology for calculating effective doses and thyroid doses to people (either individually or collectively) in the path of airborne radioactive material released from a nuclear facility following a hypothetical accident. The radionuclides considered are those associated with substances having the greatest potential for becoming airborne in reactor accidents: tritium (HTO), noble gases and their daughters, radioiodines, and certain radioactive particulates (Cs, Ru, Sr, Te). The standard focuses on the calculation of radiation doses for external exposures from radioactive material in the cloud; internal exposures for inhalation of radioactive material in the cloud and skin penetration of tritium; and external exposures from radionuclides deposited on the ground. It uses as modified Gaussian plume model to evaluate the time-integrated concentration downwind. (52 refs., 12 tabs., 21 figs.)

  7. ARTS, the Atmospheric Radiative Transfer Simulator - version 2.2, the planetary toolbox edition

    Science.gov (United States)

    Buehler, Stefan A.; Mendrok, Jana; Eriksson, Patrick; Perrin, Agnès; Larsson, Richard; Lemke, Oliver

    2018-04-01

    This article describes the latest stable release (version 2.2) of the Atmospheric Radiative Transfer Simulator (ARTS), a public domain software for radiative transfer simulations in the thermal spectral range (microwave to infrared). The main feature of this release is a planetary toolbox that allows simulations for the planets Venus, Mars, and Jupiter, in addition to Earth. This required considerable model adaptations, most notably in the area of gaseous absorption calculations. Other new features are also described, notably radio link budgets (including the effect of Faraday rotation that changes the polarization state) and the treatment of Zeeman splitting for oxygen spectral lines. The latter is relevant, for example, for the various operational microwave satellite temperature sensors of the Advanced Microwave Sounding Unit (AMSU) family.

  8. Determining Optimal Decision Version

    Directory of Open Access Journals (Sweden)

    Olga Ioana Amariei

    2014-06-01

    Full Text Available In this paper we start from the calculation of the product cost, applying the method of calculating the cost of hour- machine (THM, on each of the three cutting machines, namely: the cutting machine with plasma, the combined cutting machine (plasma and water jet and the cutting machine with a water jet. Following the calculation of cost and taking into account the precision of manufacturing of each machine, as well as the quality of the processed surface, the optimal decisional version needs to be determined regarding the product manufacturing. To determine the optimal decisional version, we resort firstly to calculating the optimal version on each criterion, and then overall using multiattribute decision methods.

  9. Version 2 of RSXMULTI

    International Nuclear Information System (INIS)

    Heinicke, P.; Berg, D.; Constanta-Fanourakis, P.; Quigg, E.K.

    1985-01-01

    MULTI is a general purpose, high speed, high energy physics interface to data acquisition and data investigation system that runs on PDP-11 and VAX architecture. This paper describes the latest version of MULTI, which runs under RSX-11M version 4.1 and supports a modular approach to the separate tasks that interface to it, allowing the same system to be used in single CPU test beam experiments as well as multiple interconnected CPU, large scale experiments. MULTI uses CAMAC (IEE-583) for control and monitoring of an experiment, and is written in FORTRAN-77 and assembler. The design of this version, which simplified the interface between tasks, and eliminated the need for a hard to maintain homegrown I/O system is also discussed

  10. Low-threshold extended-release naltrexone for high utilizers of public services with severe alcohol use disorder: A pilot study.

    Science.gov (United States)

    Smith-Bernardin, Shannon; Rowe, Chris; Behar, Emily; Geier, Michelle; Washington, Stuart; Santos, Glenn-Milo; Euren, Jason; Martin, Judith; Gleghorn, Alice; Coffin, Phillip O

    2018-02-01

    Extended-release naltrexone (XRNTX) is an effective treatment for alcohol use disorder (AUD). We sought to evaluate the feasibility, acceptability, and preliminary effectiveness and cost-effectiveness of XRNTX delivered as a stand-alone service to persons with severe AUD who are high utilizers of multiple urgent and emergency medical services (HUMS). Of 15 HUMS persons with severe AUD selected based on chart review, 11 agreed to participate. Participants received a mean of 4.5 injections (range 2-7). Modest benefits from XRNTX were observed in terms of patients' Urge-to-Drink Score and the costs of emergency medical services utilized. Though limited by a small sample size, costs including client utilization and study related expenses during the post-enrollment period were less than client utilization costs in the pre-enrollment period. We also observed non-significant improvements in the number of drinking days, but no change in quality of life as measured by the EQ-5D. Eighty-eight percent of participants perceived XRNTX as helping with their drinking. Findings need to be replicated in a larger study, however if replicated, the cost savings could be substantial. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Versioning of printed products

    Science.gov (United States)

    Tuijn, Chris

    2005-01-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  12. Herwig++ 2.5 release note

    International Nuclear Information System (INIS)

    Gieseke, S.; Roehr, C.A.; Siodmok, A.

    2011-02-01

    A new release of the Monte Carlo program Herwig++ (version 2.5) is now available. This version comes with a number of improvements including: new next-to-leading order matrix elements, including weak boson pair production; a colour reconnection model; diffractive processes; additional models of physics beyond the Standard Model; new leading-order matrix elements for hadron-hadron and lepton-lepton collisions as well as photon-initiated processes. (orig.)

  13. Herwig++ 2.5 release note

    Energy Technology Data Exchange (ETDEWEB)

    Gieseke, S.; Roehr, C.A.; Siodmok, A. [Karlsruher Institut fuer Technologie, Karlsruhe (DE). Inst. fuer Theoretische Physik] (and others)

    2011-02-15

    A new release of the Monte Carlo program Herwig++ (version 2.5) is now available. This version comes with a number of improvements including: new next-to-leading order matrix elements, including weak boson pair production; a colour reconnection model; diffractive processes; additional models of physics beyond the Standard Model; new leading-order matrix elements for hadron-hadron and lepton-lepton collisions as well as photon-initiated processes. (orig.)

  14. GLEAM version 3: Global Land Evaporation Datasets and Model

    Science.gov (United States)

    Martens, B.; Miralles, D. G.; Lievens, H.; van der Schalie, R.; de Jeu, R.; Fernandez-Prieto, D.; Verhoest, N.

    2015-12-01

    Terrestrial evaporation links energy, water and carbon cycles over land and is therefore a key variable of the climate system. However, the global-scale magnitude and variability of the flux, and the sensitivity of the underlying physical process to changes in environmental factors, are still poorly understood due to limitations in in situ measurements. As a result, several methods have risen to estimate global patterns of land evaporation from satellite observations. However, these algorithms generally differ in their approach to model evaporation, resulting in large differences in their estimates. One of these methods is GLEAM, the Global Land Evaporation: the Amsterdam Methodology. GLEAM estimates terrestrial evaporation based on daily satellite observations of meteorological variables, vegetation characteristics and soil moisture. Since the publication of the first version of the algorithm (2011), the model has been widely applied to analyse trends in the water cycle and land-atmospheric feedbacks during extreme hydrometeorological events. A third version of the GLEAM global datasets is foreseen by the end of 2015. Given the relevance of having a continuous and reliable record of global-scale evaporation estimates for climate and hydrological research, the establishment of an online data portal to host these data to the public is also foreseen. In this new release of the GLEAM datasets, different components of the model have been updated, with the most significant change being the revision of the data assimilation algorithm. In this presentation, we will highlight the most important changes of the methodology and present three new GLEAM datasets and their validation against in situ observations and an alternative dataset of terrestrial evaporation (ERA-Land). Results of the validation exercise indicate that the magnitude and the spatiotemporal variability of the modelled evaporation agree reasonably well with the estimates of ERA-Land and the in situ

  15. Methane release

    International Nuclear Information System (INIS)

    Seifert, M.

    1999-01-01

    The Swiss Gas Industry has carried out a systematic, technical estimate of methane release from the complete supply chain from production to consumption for the years 1992/1993. The result of this survey provided a conservative value, amounting to 0.9% of the Swiss domestic output. A continuation of the study taking into account new findings with regard to emission factors and the effect of the climate is now available, which provides a value of 0.8% for the target year of 1996. These results show that the renovation of the network has brought about lower losses in the local gas supplies, particularly for the grey cast iron pipelines. (author)

  16. The equity of the initial allocation of the greenhouse gases releases permits to firms: an approach of the public choice by the moral philosophy and the economic analysis

    International Nuclear Information System (INIS)

    Leseur, A.

    2004-10-01

    In order to fight against the climatic change, the European directive 87/2003 provides for 2005 the adoption of a European market of negotiable releases permits but entrusts each state with choosing the method of permits allocation to the concerned domestic firms. Underwriting the reaching of the aim of pollution abatement in minimizing the global costs developed, the permits market is an economical tool of environmental policy chose for this double efficiency. But on which criteria determine the initial allocation? One of the most pertinent referents is the equity. What are the requirements for this in this situation? Seizing on this question, the thesis considers the contribution that can bring the moral and political philosophy, in particular the theories of the distributive justice, taking into account of two important aspects of the problem: 1)the property to distribute has particular characteristics, particularly the negotiability; 2)the attributing agents are firms and not the physical persons. In the first part, the thesis reveals, via the economical analysis, the operation of a permit competitive market and identifies the stakes, both at the pollution decision level than of the firms production in various contexts of market, and at those of the input or output decisions. In the second part, this work deals with the justice theories. The approach consists at first to establish their relevance showing that a firm can be considered as a moral entity, and be subject of duties and rights. Then, the question is to adapt the theories argumentation to this entity. This work emphasizes particularly the idea of a right to the chances equality for the competitiveness. It is then in the tension between this right and the duty to comply with the environmental policy that is found the equitable allocation. (O.M.)

  17. Original Research Psychometric evaluation of the Shona version of ...

    African Journals Online (AJOL)

    ... version of the. Multidimensional Scale of Perceived Social Support ... informal caregivers in the management of long term health conditions ... cultural translations and adaptations of PROs.15 Given how ...... Asia Pac J Public Health. 2015 ...

  18. Training Materials for Release 3

    DEFF Research Database (Denmark)

    Wake, Jo Dugstad; Hansen, Cecilie; Debus, Kolja

    This document, D7.4 – training materials for release 3, provides an overview of the training material for version 3 of the NEXT-TELL tools and methods. Previous documents submitted as part of work package 7, which is about teacher training, are D7.1 – Training Concept, D7.2 – Training Materials...... for Release 1 and D7.3 – Training Materials for Release 2. D7.4 builds on D7.1 and D7.2 and D7.3. D7.4 contains further development of previous work within WP7, essentially a revised theoretical approach to the teacher training, and expansion of the notion of tool training. The media in use have been expanded...

  19. Contact: Releasing the news

    Science.gov (United States)

    Pinotti, Roberto

    The problem of mass behavior after man's future contacts with other intelligences in the universe is not only a challenge for social scientists and political leaders all over the world, but also a cultural time bomb as well. In fact, since the impact of CETI (Contact with Extraterrestrial Intelligence) on human civilization, with its different cultures, might cause a serious socio-anthropological shock, a common and predetermined worldwide strategy is necessary in releasing the news after the contact, in order to keep possible manifestations of fear, panic and hysteria under control. An analysis of past studies in this field and of parallel historical situations as analogs suggests a definite "authority crisis" in the public as a direct consequence of an unexpected release of the news, involving a devastating "chain reaction" process (from both the psychological and sociological viewpoints) of anomie and maybe the collapse of today's society. The only way to prevent all this is to prepare the world's public opinion concerning contact before releasing the news, and to develop a long-term strategy through the combined efforts of scientists, political leaders, intelligence agencies and the mass media, in order to create the cultural conditions in which a confrontation with ETI won't affect mankind in a traumatic way. Definite roles and tasks in this multi-level model are suggested.

  20. Version control with Git

    CERN Document Server

    Loeliger, Jon

    2012-01-01

    Get up to speed on Git for tracking, branching, merging, and managing code revisions. Through a series of step-by-step tutorials, this practical guide takes you quickly from Git fundamentals to advanced techniques, and provides friendly yet rigorous advice for navigating the many functions of this open source version control system. This thoroughly revised edition also includes tips for manipulating trees, extended coverage of the reflog and stash, and a complete introduction to the GitHub repository. Git lets you manage code development in a virtually endless variety of ways, once you understand how to harness the system's flexibility. This book shows you how. Learn how to use Git for several real-world development scenarios ; Gain insight into Git's common-use cases, initial tasks, and basic functions ; Use the system for both centralized and distributed version control ; Learn how to manage merges, conflicts, patches, and diffs ; Apply advanced techniques such as rebasing, hooks, and ways to handle submodu...

  1. Global Historical Climatology Network (GHCN), Version 1 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  2. COSY INFINITY version 8

    International Nuclear Information System (INIS)

    Makino, Kyoko; Berz, Martin

    1999-01-01

    The latest version of the particle optics code COSY INFINITY is presented. Using Differential Algebraic (DA) methods, the code allows the computation of aberrations of arbitrary field arrangements to in principle unlimited order. Besides providing a general overview of the code, several recent techniques developed for specific applications are highlighted. These include new features for the direct utilization of detailed measured fields as well as rigorous treatment of remainder bounds

  3. EASI graphics - Version II

    International Nuclear Information System (INIS)

    Allensworth, J.A.

    1984-04-01

    EASI (Estimate of Adversary Sequence Interruption) is an analytical technique for measuring the effectiveness of physical protection systems. EASI Graphics is a computer graphics extension of EASI which provides a capability for performing sensitivity and trade-off analyses of the parameters of a physical protection system. This document reports on the implementation of the Version II of EASI Graphics and illustrates its application with some examples. 5 references, 15 figures, 6 tables

  4. Public Waters Inventory Maps

    Data.gov (United States)

    Minnesota Department of Natural Resources — This theme is a scanned and rectified version of the Minnesota DNR - Division of Waters "Public Waters Inventory" (PWI) maps. DNR Waters utilizes a small scale...

  5. Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). User's Manual for the ECLS-K:2011 Kindergarten-First Grade Data File and Electronic Codebook, Public Version. NCES 2015-078

    Science.gov (United States)

    Tourangeau, Karen; Nord, Christine; Lê, Thanh; Wallner-Allen, Kathleen; Hagedorn, Mary C.; Leggitt, John; Najarian, Michelle

    2015-01-01

    This manual provides guidance and documentation for users of the longitudinal kindergarten-first grade (K-1) data file of the Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). It mainly provides information specific to the first-grade rounds of data collection. Data for the ECLS-K:2011 are released in both a…

  6. Future directions in nuclear data publication

    International Nuclear Information System (INIS)

    Firestone, R.B.; Chu, S.Y.F.; Ekstroem, L.P.; Nordberg, H.

    1997-01-01

    Rapid advances in computer based technologies provide enormous opportunities and great challenges to the way nuclear data is disseminated. Simple text databases and linear, command driven software are giving way to more complex, indexed databases and object-oriented, menu-driven applications. The Internet will clearly dominate dissemination of nuclear data in for foreseeable future, and CD-ROM technology (or similar high-density media) will replace hard-copy publication. The Isotopes Project has released Version 1.0 of VuENSDF, a versatile, 32-bit, C ++ , Internet enabled application for disseminating nuclear data. VuENSDF can automatically retrieve data over Internet; display decay scheme drawings, level tables, and references; and perform limited database searching of nuclear bands, transition coincidences, and reference authors. Version 2.0 of VuENSDF is being developed and will offer more complete database searches, plotting, and data entry utilities. The Isotopes Project has established a series of home pages on the WWW to provide data for various topics of nuclear physics. The group has also published a CD-ROM version of the Table of Isotopes using Adobe Acrobat software. Updated, Internet versions of the Table of Isotopes are planned. (author)

  7. The Unified Extensional Versioning Model

    DEFF Research Database (Denmark)

    Asklund, U.; Bendix, Lars Gotfred; Christensen, H. B.

    1999-01-01

    Versioning of components in a system is a well-researched field where various adequate techniques have already been established. In this paper, we look at how versioning can be extended to cover also the structural aspects of a system. There exist two basic techniques for versioning - intentional...

  8. The Second Data Release of the Sloan Digital Sky Survey

    CERN Document Server

    Abazajian, Kevork; ̈ueros, Marcel A. Ag; Allam, Sahar S.; Anderson, KurtS. J.; Anderson, Scott F.; Annis, James; Bahcall, Neta A.; Baldry, Ivan K.; StevenBastian; Berlind, Andreas; Bernardi, Mariangela; Blanton, Michael R.; BochanskiJr., John J.; Boroski, William N.; Briggs, John W.; Brinkmann, J.; Brunner, Robert J.; ́ari, Tam ́asBudav; Carey, Larry N.; Carliles, Samuel; Castander, Francisco J.; Connolly, A. J.; Csabai, Istvan; Doi, Mamoru; Dong, Feng; Eisenstein, Daniel J.; Evans, Michael L.; Fan, Xiaohui; Finkbeiner, Douglas P.; Friedman, Scott D.; Frieman, Joshua A.; Fukugita, Masataka; Gal, RoyR.; Gillespie, Bruce; Glazebrook, Karl; Gray, Jim; Grebel, Eva K.; Gunn, James E.; Gurbani, Vijay K.; Hall, Patrick B.; Hamabe, Masaru; Harris, Frederick H.; C.Harris, Hugh; Harvanek, Michael; Heckman, Timothy M.; Hendry, John S.; Hennessy, Gregory S.; Hindsley, Robert B.; Hogan, Craig J.; Hogg, David W.; Holmgren, Donald J.; Ichikawa, Shin-ichi; Ichikawa, Takashi; Ivezic, Zeljko; Jester, Sebastian; Johnston, David E.; Jorgensen, AndersM.; Kent, Stephen M.; Kleinman, S. J.; Knapp, G. R.; Kniazev, Alexei Yu.; Kron, Richard G.; Krzesinski, Jurek; Kunszt, Peter Z.; Kuropatkin, Nickolai; Q.Lamb, Donald; Lampeitl, Hubert; Lee, Brian C.; Leger, R. French; Li, Nolan; Lin, Huan; Loh, Yeong-Shang; Long, Daniel C.; Loveday, Jon; Lupton, Robert H.; Malik, Tanu; BruceMargon; Matsubara, Takahiko; McGehee, Peregrine M.; McKay, Timothy A.; AveryMeiksin; Munn, Jeffrey A.; Nakajima, Reiko; Nash, Thomas; Neilsen, Eric H. Jr.; JoNewberg, Heidi; Newman, Peter R.; Nichol, Robert C.; Nicinski, Tom; Nieto-Santisteban, Maria; Nitta, Atsuko; Okamura, Sadanori; O'Mullane, William; Ostriker, Jeremiah P.; Owen, Russell; Padmanabhan, Nikhil; Peoples, John; Pier, Jeffrey R.; Pope, Adrian C.; Quinn, Thomas R.; Richards, Gordon T.; Richmond, Michael W.; Rix, Hans-Walter; Rockosi, Constance M.; Schlegel, David J.; Schneider, Donald P.; Scranton, Ryan; Sekiguchi, Maki; Seljak, Uros; Sergey, Gary; Sesar, Branimir; Sheldon, Erin; Shimasaku, Kazu; Siegmund, Walter A.; Silvestri, Nicole M.; Smith, J. Allyn; ́c, Vernesa Smolči; Snedden, Stephanie A.; AlbertStebbins; Stoughton, Chris; Strauss, Michael A.; SubbaRao, Mark; Szalay, Alexander S.; Szapudi, Istv ́an; Szkody, Paula; Szokoly, Gyula P.; Tegmark, Max; Teodoro, Luis; Thakar, AniruddhaR.; Tremonti, Christy; Tucker, Douglas L.; Uomoto, Alan; Vanden Berk, Daniel E.; Vandenberg, Jan; Vogeley, Michael S.; Voges, Wolfgang; Vogt, Nicole P.; M.Walkowicz, Lucianne; Wang, Shu-i; Weinberg, David H.; West, Andrew A.; White, Simon D.M.; Wilhite, BrianC.; Xu, Yongzhong; Yanny, Brian; Yasuda, Naoki; Yip, Ching-Wa; Yocum, D. R.; York, Donald G.; Zehavi, Idit; Zibetti, Stefano; Zucker, Daniel B.

    2004-01-01

    The Sloan Digital Sky Survey has validated and made publicly available its Second Data Release. This data release consists of 3324 square degrees of five-band (u g r i z) imaging data with photometry for over 88 million unique objects, 367,360 spectra of galaxies, quasars, stars and calibrating blank sky patches selected over 2627 degrees of this area, and tables of measured parameters from these data. The imaging data reach a depth of r ~ 22.2 (95% completeness limit for point sources) and are photometrically and astrometrically calibrated to 2% rms and 100 milli-arcsec rms per coordinate, respectively. The imaging data have all been processed through a new version of the SDSS imaging pipeline, in which the most important improvement since the last data release is fixing an error in the model fits to each object. The result is that model magnitudes are now a good proxy for point spread function (PSF) magnitudes for point sources, and Petrosian magnitudes for extended sources. The spectroscopy extends from 38...

  9. URGENCES NOUVELLE VERSION

    CERN Multimedia

    Medical Service

    2002-01-01

    The table of emergency numbers that appeared in Bulletin 10/2002 is out of date. The updated version provided by the Medical Service appears on the following page. Please disregard the previous version. URGENT NEED OF A DOCTOR GENEVAPATIENT NOT FIT TO BE MOVED: Call your family doctor Or SOS MEDECINS (24H/24H) 748 49 50 Or ASSOC. OF GENEVA DOCTORS (7H-23H) 322 20 20 PATIENT CAN BE MOVED: HOPITAL CANTONAL 24 Micheli du Crest 372 33 11 382 33 11 CHILDREN'S HOSPITAL 6 rue Willy Donzé 382 68 18 382 45 55 MATERNITY 24 Micheli du Crest 382 68 16 382 33 11 OPHTALMOLOGY 22 Alcide Jentzer 382 84 00 HOPITAL DE LA TOUR Meyrin 719 61 11 CENTRE MEDICAL DE MEYRIN Champs Fréchets 719 74 00 URGENCES : FIRE BRIGADE 118 FIRE BRIGADE CERN 767 44 44 BESOIN URGENT D'AMBULANCE (GENEVE ET VAUD) : 144 POLICE 117 ANTI-POISON CENTRE 24H/24H 01 251 51 510 EUROPEAN EMERGENCY CALL: 112 FRANCE PATIENT NOT FIT TO BE MOVED: call your family doctor PATIENT CAN BE MOVED: ST. JULIE...

  10. Evaluation of unique identifiers used as keys to match identical publications in Pure and SciVal – a case study from health science [version 2; referees: 1 approved, 2 approved with reservations

    Directory of Open Access Journals (Sweden)

    Heidi Holst Madsen

    2016-09-01

    Full Text Available Unique identifiers (UID are seen as an effective key to match identical publications across databases or identify duplicates in a database. The objective of the present study is to investigate how well UIDs work as match keys in the integration between Pure and SciVal, based on a case with publications from the health sciences. We evaluate the matching process based on information about coverage, precision, and characteristics of publications matched versus not matched with UIDs as the match keys. We analyze this information to detect errors, if any, in the matching process. As an example we also briefly discuss how publication sets formed by using UIDs as the match keys may affect the bibliometric indicators number of publications, number of citations, and the average number of citations per publication.  The objective is addressed in a literature review and a case study. The literature review shows that only a few studies evaluate how well UIDs work as a match key. From the literature we identify four error types: Duplicate digital object identifiers (DOI, incorrect DOIs in reference lists and databases, DOIs not registered by the database where a bibliometric analysis is performed, and erroneous optical or special character recognition. The case study explores the use of UIDs in the integration between the databases Pure and SciVal. Specifically journal publications in English are matched between the two databases. We find all error types except erroneous optical or special character recognition in our publication sets. In particular the duplicate DOIs constitute a problem for the calculation of bibliometric indicators as both keeping the duplicates to improve the reliability of citation counts and deleting them to improve the reliability of publication counts will distort the calculation of average number of citations per publication. The use of UIDs as a match key in citation linking is implemented in many settings, and the availability of

  11. LHC brochure (Italian version)

    CERN Multimedia

    Lefevre, Christiane

    2011-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  12. LHC brochure (German version)

    CERN Multimedia

    Lefevre, Christiane

    2011-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  13. LHC brochure (French version)

    CERN Multimedia

    Lefevre, C

    2010-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  14. LHC brochure (Danish version)

    CERN Multimedia

    Lefevre, C

    2010-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  15. LHC brochure (English version)

    CERN Multimedia

    Lefevre, C

    2010-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  16. LHC brochure (French version)

    CERN Multimedia

    Marcastel, Fabienne

    2014-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  17. LHC brochure (English version)

    CERN Multimedia

    AUTHOR|(CDS)2070305

    2014-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  18. LHC Brochure (german version)

    CERN Multimedia

    Vanoli, C.

    2006-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  19. LHC brochure (German version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  20. LHC brochure (German version)

    CERN Multimedia

    Marcastel, Fabienne

    2014-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  1. LHC brochure (Spanish version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  2. NODC Standard Product: World Ocean Database 1998 version 2 (5 disc set) (NODC Accession 0098461)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Since the first release of WOD98, the staff of the Ocean Climate Laboratory have performed additional quality control on the database. Version 2.0 also includes...

  3. Recent development of BOA version 3

    International Nuclear Information System (INIS)

    Deshon, J.; Hussey, D.; Westacott, J.; Young, M.; Secker, J.; Epperson, K.; McGurk, J.; Henshaw, J.

    2010-01-01

    BOA is the EPRI code developed to help understand material transport issues in PWR systems. In particular, BOA was developed to investigate the problem of crud induced power shifts (CIPS) or axial offset anomalies (AOA) that are related to crud accumulation on fuel clad and the subsequent uptake of boron within this crud. Over the last few years significant developments of BOA have taken place; these include new models for release and deposition of soluble and particulate material as well as new models for boron capture in the crud. The new version of BOA (version 3), as well as predicting the extent of AOA a plant might expect during a cycle, also predicts soluble and particulate Ni/Fe levels in the coolant, end of cycle Ni shut-down releases and the relative amounts of Ni/Fe within the fuel crud. The model is being validated against plant data and this paper briefly discusses the recent developments, the fundamental scientific basis for these changes and some of the validation studies. (author)

  4. Nuclear Criticality Safety Handbook, Version 2. English translation

    International Nuclear Information System (INIS)

    2001-08-01

    The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of the Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modeled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision has been made based on previous studies for the chapter that treats modeling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, an burnup credit. This revision has solved the inconsistencies found in the first version between the evaluation of errors found in JACS code system and the criticality condition data that were calculated based on the evaluation. This report is an English translation of the Nuclear Criticality Safety Handbook, Version 2, originally published in Japanese as JAERI 1340 in 1999. (author)

  5. Git version control cookbook

    CERN Document Server

    Olsson, Aske

    2014-01-01

    This practical guide contains a wide variety of recipes, taking you through all the topics you need to know about to fully utilize the most advanced features of the Git system. If you are a software developer or a build and release engineer who uses Git in your daily work and want to take your Git knowledge to the next level, then this book is for you. To understand and follow the recipes included in this book, basic knowledge of Git command-line code is mandatory.

  6. An update to the Surface Ocean CO2 Atlas (SOCAT version 2)

    NARCIS (Netherlands)

    Bakker, D.C.E.; Pfeil, B.; Smith, K.; Hankin, S.; Olsen, A.; Alin, S. R.; Cosca, C.; Harasawa, S.; Kozyr, A.; Nojiri, Y.; O'Brien, K. M.; Schuster, U.; Telszewski, M.; Tilbrook, B.; Wada, C.; Akl, J.; Barbero, L.; Bates, N. R.; Boutin, J.; Bozec, Y.; Cai, W. -J.; Castle, R. D.; Chavez, F. P.; Chen, L.; Chierici, M.; Currie, K.; de Baar, H. J. W.; Evans, W.; Feely, R. A.; Fransson, A.; Gao, Z.; Hales, B.; Hardman-Mountford, N. J.; Hoppema, M.; Huang, W. -J.; Hunt, C. W.; Huss, B.; Ichikawa, T.; Johannessen, T.; Jones, E. M.; Jones, S. D.; Jutterstrom, S.; Kitidis, V.; Koertzinger, A.; Landschuetzer, P.; Lauvset, S. K.; Lefevre, N.; Manke, A. B.; Mathis, J. T.; Merlivat, L.; Metzl, N.; Murata, A.; Newberger, T.; Omar, A. M.; Ono, T.; Park, G. -H.; Paterson, K.; Pierrot, D.; Rios, A. F.; Sabine, C. L.; Saito, S.; Salisbury, J.; Sarma, V. V. S. S.; Schlitzer, R.; Sieger, R.; Skjelvan, I.; Steinhoff, T.; Sullivan, K. F.; Sun, H.; Sutton, A. J.; Suzuki, T.; Sweeney, C.; Takahashi, T.; Tjiputra, J.; Tsurushima, N.; van Heuven, S. M. A. C.; Vandemark, D.; Vlahos, P.; Wallace, D. W. R.; Wanninkhof, R.; Watson, A.J.

    2014-01-01

    The Surface Ocean CO2 Atlas (SOCAT), an activity of the international marine carbon research community, provides access to synthesis and gridded fCO(2) (fugacity of carbon dioxide) products for the surface oceans. Version 2 of SOCAT is an update of the previous release (version 1) with more data

  7. Fuel behaviour calculations with version 2.0 of the code FUROM

    International Nuclear Information System (INIS)

    Kulacsy, K.

    2011-01-01

    The fuel modelling code FUROM (FUel ROd Model), suitable for calculating the normal operation condition behaviour of PWR and WWER fuels, has been developed at AEKI for several years. In 2010 the new version of the code, FUROM-2.0 was released. Calculations performed with this version and results are presented. (author)

  8. Recommended Parameter Values for GENII Modeling of Radionuclides in Routine Air and Water Releases

    Energy Technology Data Exchange (ETDEWEB)

    Snyder, Sandra F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Arimescu, Carmen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Napier, Bruce A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hay, Tristan R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-11-01

    The GENII v2 code is used to estimate dose to individuals or populations from the release of radioactive materials into air or water. Numerous parameter values are required for input into this code. User-defined parameters cover the spectrum from chemical data, meteorological data, agricultural data, and behavioral data. This document is a summary of parameter values that reflect conditions in the United States. Reasonable regional and age-dependent data is summarized. Data availability and quality varies. The set of parameters described address scenarios for chronic air emissions or chronic releases to public waterways. Considerations for the special tritium and carbon-14 models are briefly addressed. GENIIv2.10.0 is the current software version that this document supports.

  9. Documentation to the NCES Common Core of Data Public Elementary/Secondary School Universe Survey: School Year 2010-11. Version Provisional 2a. NCES 2012-338rev

    Science.gov (United States)

    Keaton, Patrick

    2012-01-01

    The Public Elementary/Secondary School Universe file includes data for the following variables: NCES school ID number, state school ID number, name of the school, name of the agency that operates the school, mailing address, physical location address, phone number, school type, operational status, locale code, latitude, longitude, county number,…

  10. IMG 4 version of the integrated microbial genomes comparative analysis system

    Science.gov (United States)

    Markowitz, Victor M.; Chen, I-Min A.; Palaniappan, Krishna; Chu, Ken; Szeto, Ernest; Pillay, Manoj; Ratner, Anna; Huang, Jinghua; Woyke, Tanja; Huntemann, Marcel; Anderson, Iain; Billis, Konstantinos; Varghese, Neha; Mavromatis, Konstantinos; Pati, Amrita; Ivanova, Natalia N.; Kyrpides, Nikos C.

    2014-01-01

    The Integrated Microbial Genomes (IMG) data warehouse integrates genomes from all three domains of life, as well as plasmids, viruses and genome fragments. IMG provides tools for analyzing and reviewing the structural and functional annotations of genomes in a comparative context. IMG’s data content and analytical capabilities have increased continuously since its first version released in 2005. Since the last report published in the 2012 NAR Database Issue, IMG’s annotation and data integration pipelines have evolved while new tools have been added for recording and analyzing single cell genomes, RNA Seq and biosynthetic cluster data. Different IMG datamarts provide support for the analysis of publicly available genomes (IMG/W: http://img.jgi.doe.gov/w), expert review of genome annotations (IMG/ER: http://img.jgi.doe.gov/er) and teaching and training in the area of microbial genome analysis (IMG/EDU: http://img.jgi.doe.gov/edu). PMID:24165883

  11. IMG 4 version of the integrated microbial genomes comparative analysis system

    Energy Technology Data Exchange (ETDEWEB)

    Markowitz, Victor M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Chen, I-Min A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Palaniappan, Krishna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Chu, Ken [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Szeto, Ernest [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Pillay, Manoj [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Ratner, Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Huang, Jinghua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Woyke, Tanja [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Huntemann, Marcel [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Anderson, Iain [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Billis, Konstantinos [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Varghese, Neha [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Mavromatis, Konstantinos [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Pati, Amrita [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Ivanova, Natalia N. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Kyrpides, Nikos C. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program

    2013-10-27

    The Integrated Microbial Genomes (IMG) data warehouse integrates genomes from all three domains of life, as well as plasmids, viruses and genome fragments. IMG provides tools for analyzing and reviewing the structural and functional annotations of genomes in a comparative context. IMG’s data content and analytical capabilities have increased continuously since its first version released in 2005. Since the last report published in the 2012 NAR Database Issue, IMG’s annotation and data integration pipelines have evolved while new tools have been added for recording and analyzing single cell genomes, RNA Seq and biosynthetic cluster data. Finally, different IMG datamarts provide support for the analysis of publicly available genomes (IMG/W: http://img.jgi.doe.gov/w), expert review of genome annotations (IMG/ER: http://img.jgi.doe.gov/er) and teaching and training in the area of microbial genome analysis (IMG/EDU: http://img.jgi.doe.gov/edu).

  12. News/Press Releases

    Data.gov (United States)

    Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

  13. Herwig++ 2.6 release note

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, K.; Gieseke, S.; Roehr, C. [Karlsruher Institut fuer Technologie, Karlsruhe (DE). Inst. fuer Theoretische Physik] (and others)

    2012-05-15

    A new release of the Monte Carlo event generator Herwig++ (version 2.6) is now available. This version comes with a number of improvements including: a new structure for the implementation of next-to-leading order matrix elements; an improved treatment of wide-angle gluon radiation; new hard-coded next-to-leading order matrix elements for deep inelastic scattering and weak vector boson fusion; additional models of physics beyond the StandardModel, including the production of colour sextet particles; a statistical colour reconnection model; automated energy scaling of underlying-event tunes.

  14. Herwig++ 2.6 release note

    International Nuclear Information System (INIS)

    Arnold, K.; Gieseke, S.; Roehr, C.

    2012-05-01

    A new release of the Monte Carlo event generator Herwig++ (version 2.6) is now available. This version comes with a number of improvements including: a new structure for the implementation of next-to-leading order matrix elements; an improved treatment of wide-angle gluon radiation; new hard-coded next-to-leading order matrix elements for deep inelastic scattering and weak vector boson fusion; additional models of physics beyond the StandardModel, including the production of colour sextet particles; a statistical colour reconnection model; automated energy scaling of underlying-event tunes.

  15. ERRATUM - French version only

    CERN Multimedia

    Le texte suivant remplace la version française de l'encadré paru en page 2 du Bulletin 28/2003 : Le 1er juillet 1953, les représentants des douze Etats Membres fondateurs du CERN signèrent la convention de l'Organisation. Aujourd'hui, le CERN compte vingt Etats Membres Européens : l'Allemagne, l'Autriche, la Belgique, la Bulgarie, le Danemark, l'Espagne, la Finlande, la France, la Grèce, la Hongrie, l'Italie, la Norvège, les Pays-Bas, la Pologne, le Portugal, la République Slovaque, la République Tchèque, le Royaume-Uni, la Suède, et la Suisse. Les Etats-Unis, l'Inde, l'Israël, le Japon, la Fédération Russe, la Turquie, la Commission Européenne et l'UNESCO ont un statut d'Etat observateur.

  16. Limited Releases of Krsko NPP

    International Nuclear Information System (INIS)

    Breznik, B.; Kovac, A.

    2001-01-01

    Full text: Krsko Nuclear Power Plant is about 700 MW Pressurised Water Reactor plant located in Slovenia close to the border with Croatia. The authorised limit for the radioactive releases is basically set to 50 μSv effective dose per year to the members of the public. There is also additional limitation of total activities released in a year and concentration. The poster presents the effluents of the year 2000 and evaluated dose referring to the limits and to the natural and other sources of radiation around the plant. (author)

  17. Publication of the Bulletin

    CERN Multimedia

    The final edition (Nos 51-52/2009 and 1-2/2010) of the last Weekly Bulletin of the year will be published on Friday 11 December and will cover events at CERN from 14 December 2009 to 8 January 2010. Announcements for publication in this issue should reach the Publication Section (Communications group) or the Staff Association, as appropriate, by noon on Tuesday 8 December. Bulletin publication 2010 The table below lists the 2010 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Paper version 2-3 Tuesday 5 January Friday 8 and 15 January Wednesday 13 J...

  18. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

  19. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (MACINTOSH VERSION)

    Science.gov (United States)

    Culbert, C.

    1994-01-01

    version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

  20. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (IBM PC VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory

  1. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (UNIX VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory

  2. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory

  3. In-vessel source term analysis code TRACER version 2.3. User's manual

    International Nuclear Information System (INIS)

    Toyohara, Daisuke; Ohno, Shuji; Hamada, Hirotsugu; Miyahara, Shinya

    2005-01-01

    A computer code TRACER (Transport Phenomena of Radionuclides for Accident Consequence Evaluation of Reactor) version 2.3 has been developed to evaluate species and quantities of fission products (FPs) released into cover gas during a fuel pin failure accident in an LMFBR. The TRACER version 2.3 includes new or modified models shown below. a) Both model: a new model for FPs release from fuel. b) Modified model for FPs transfer from fuel to bubbles or sodium coolant. c) Modified model for bubbles dynamics in coolant. Computational models, input data and output data of the TRACER version 2.3 are described in this user's manual. (author)

  4. EPICS application source/release control

    International Nuclear Information System (INIS)

    Zieman, B.; Anderson, J.; Kraimer, M.

    1995-01-01

    This manual describes a set of Application Source/Release Control tools (appSR) that can be used to develop software for EPICS based control systems. The Application Source/Release Control System (appSR) has been unbundled from base EPICS and is now available as an EPICS extension. Due to this unbundling, two new directories must be added to a user's path (see section ''Environment'' on page 3 for more information) and a new command getapp must be issued after the getrel command to get a specific version of appSR (see section ''Creating The Initial Application System Area'' on page 7 for more information). It is now required that GNU make version 3.71 or later be used for makes instead of SUN make. Users should now type gmake instead of make

  5. Enigma Version 12

    Science.gov (United States)

    Shores, David; Goza, Sharon P.; McKeegan, Cheyenne; Easley, Rick; Way, Janet; Everett, Shonn; Guerra, Mark; Kraesig, Ray; Leu, William

    2013-01-01

    Enigma Version 12 software combines model building, animation, and engineering visualization into one concise software package. Enigma employs a versatile user interface to allow average users access to even the most complex pieces of the application. Using Enigma eliminates the need to buy and learn several software packages to create an engineering visualization. Models can be created and/or modified within Enigma down to the polygon level. Textures and materials can be applied for additional realism. Within Enigma, these models can be combined to create systems of models that have a hierarchical relationship to one another, such as a robotic arm. Then these systems can be animated within the program or controlled by an external application programming interface (API). In addition, Enigma provides the ability to use plug-ins. Plugins allow the user to create custom code for a specific application and access the Enigma model and system data, but still use the Enigma drawing functionality. CAD files can be imported into Enigma and combined to create systems of computer graphics models that can be manipulated with constraints. An API is available so that an engineer can write a simulation and drive the computer graphics models with no knowledge of computer graphics. An animation editor allows an engineer to set up sequences of animations generated by simulations or by conceptual trajectories in order to record these to highquality media for presentation. Enigma Version 12 Lyndon B. Johnson Space Center, Houston, Texas 28 NASA Tech Briefs, September 2013 Planetary Protection Bioburden Analysis Program NASA's Jet Propulsion Laboratory, Pasadena, California This program is a Microsoft Access program that performed statistical analysis of the colony counts from assays performed on the Mars Science Laboratory (MSL) spacecraft to determine the bioburden density, 3-sigma biodensity, and the total bioburdens required for the MSL prelaunch reports. It also contains numerous

  6. GENIE Production Release 2.10.0

    Energy Technology Data Exchange (ETDEWEB)

    Alam, M. [Aligarh Muslim Univ., Aligarh (India). Dept. of Physics; Andreopoulos, C. [Univ. of Liverpool (United Kingdom). Dept. of Physics; Science and Technology Facilities Council (STFC), Oxford (United Kingdom). Rutherford Appleton Lab. (RAL); Athar, M. [Aligarh Muslim Univ., Aligarh (India). Dept. of Physics; Bodek, A. [Univ. of Rochester, NY (United States). Dept. of Physics; Christy, E. [Hampton Univ., Hampton, VA (United States). Dept. of Physics; Coopersmith, B. [Univ. of Rochester, NY (United States). Dept. of Physics; Dennis, S. [Univ. of Warwick, Coventry (United Kingdom). Dept .of Physics; Dytman, S. [Univ. of Pittsburgh, PA (United States). Dept. of Physics and Astronomy; Gallagher, H. [Tufts Univ., Medford, MA (United States). Dept. of Physics and Astronomy; Geary, N. [Univ. of Pittsburgh, PA (United States). Dept. of Physics and Astronomy; Golan, T. [Univ. of Rochester, NY (United States). Dept. of Physics; Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Hatcher, R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Hoshina, K. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Physics. Wisconsin IceCube Particle Astrophysics Center; Liu, J. [College of William and Mary, Williamsburg, VA (United States). Dept. of Physics; Mahn, K. [Michigan State Univ., East Lansing, MI (United States). Dept. of Physics and Astronomy; Marshall, C. [Univ. of Rochester, NY (United States). Dept. of Physics; Morrison, J. [Michigan State Univ., East Lansing, MI (United States). Dept. of Physics and Astronomy; Nirkko, M. [Univ. of Bern (Switzerland). Albert Einstein Center for Fundamental Physics. Lab. for High Energy Physics (LHEP); Nowak, J. [Lancaster Univ. (United Kingdom). Dept. of Physics; Perdue, G. N. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Yarba, J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2015-12-25

    GENIE is a neutrino Monte Carlo event generator that simulates the primary interaction of a neutrino with a nuclear target, along with the subsequent propagation of the reaction products through the nuclear medium. It additionally contains libraries for fully-featured detector geometries and for managing various types of neutrino flux. This note details recent updates to GENIE, in particular, changes introduced into the newest production release, version 2.10.0.

  7. GENIE Production Release 2.10.0

    International Nuclear Information System (INIS)

    Alam, M.; Athar, M.; Hatcher, R.; Hoshina, K.; Nowak, J.; Yarba, J.

    2015-01-01

    GENIE is a neutrino Monte Carlo event generator that simulates the primary interaction of a neutrino with a nuclear target, along with the subsequent propagation of the reaction products through the nuclear medium. It additionally contains libraries for fully-featured detector geometries and for managing various types of neutrino flux. This note details recent updates to GENIE, in particular, changes introduced into the newest production release, version 2.10.0.

  8. Latest NASA Instrument Cost Model (NICM): Version VI

    Science.gov (United States)

    Mrozinski, Joe; Habib-Agahi, Hamid; Fox, George; Ball, Gary

    2014-01-01

    The NASA Instrument Cost Model, NICM, is a suite of tools which allow for probabilistic cost estimation of NASA's space-flight instruments at both the system and subsystem level. NICM also includes the ability to perform cost by analogy as well as joint confidence level (JCL) analysis. The latest version of NICM, Version VI, was released in Spring 2014. This paper will focus on the new features released with NICM VI, which include: 1) The NICM-E cost estimating relationship, which is applicable for instruments flying on Explorer-like class missions; 2) The new cluster analysis ability which, alongside the results of the parametric cost estimation for the user's instrument, also provides a visualization of the user's instrument's similarity to previously flown instruments; and 3) includes new cost estimating relationships for in-situ instruments.

  9. TOUGHREACT Version 2.0: A simulator for subsurface reactive transport under non-isothermal multiphase flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Xu, T.; Spycher, N.; Sonnenthal, E.; Zhang, G.; Zheng, L.; Pruess, K.

    2010-08-01

    TOUGHREACT is a numerical simulation program for chemically reactive non-isothermal flows of multiphase fluids in porous and fractured media, and was developed by introducing reactive chemistry into the multiphase fluid and heat flow simulator TOUGH2 V2. The first version of TOUGHREACT was released to the public through the U.S. Department of Energy's Energy Science and Technology Software Center (ESTSC) in August 2004. It is among the most frequently requested of ESTSC's codes. The code has been widely used for studies in CO{sub 2} geological sequestration, nuclear waste isolation, geothermal energy development, environmental remediation, and increasingly for petroleum applications. Over the past several years, many new capabilities have been developed, which were incorporated into Version 2 of TOUGHREACT. Major additions and improvements in Version 2 are discussed here, and two application examples are presented: (1) long-term fate of injected CO{sub 2} in a storage reservoir and (2) biogeochemical cycling of metals in mining-impacted lake sediments.

  10. Comparing Danish and Swedish versions of PISA scientific literacy

    DEFF Research Database (Denmark)

    Serder, Malmø University, Margareta; Sørensen, Helene

    This paper presents a comparison between the Swedish, Danish, English, and French versions of three scientific literacy test-units from the released PISA items 2006. More specifically it compares how different words and concepts have been translated in the Swedish and Danish tests, compared...... to the English and French original versions. Differences that occur as a result of the translation process concerning words’ meaning are demonstrated. The possible consequences of such differences are exemplified by an excerpt from a situation in which Swedish 15-year-old students collaboratively worked...... with these three PISA units. In the paper we claim that in spite of detailed and strongly controlled methods for achieving translations of high standard used by the PISA, important and perhaps even decisive, differences between the four versions exist....

  11. A Statistical Review of CALIOP Version 3 and Version 4 Cloud Aerosol Discrimination

    Science.gov (United States)

    Zeng, S.

    2016-12-01

    The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission has now delivered a 10-year record of high-resolution profiles of backscatter at 532 nm and 1064 nm and linear depolarization at 532 nm. These long-term active sensor measurements at global scale have led to significant advances in our understanding of the vertical distribution of clouds and aerosols in the atmosphere. In the fall of 2016, the CALIPSO science team is scheduled to release a new version of their cloud and aerosol data products. The new cloud and aerosol discrimination products are derived using updated probability density functions that account for numerous improvements to the CALIOP calibration and the use of the GMAO MERRA-2 meteorological data. Moreover, the CAD algorithm is now applied to all layers detected, thus greatly improving the identification of such features as overshooting convective clouds, stratospheric aerosol layers, and high intensity dust storms. Post-processing modules are added to the standard CAD algorithm to ensure proper identification of (for example) the tenuous edges of cirrus clouds and water clouds lying beneath optically dense smoke layers. This work presents statistical comparisons between the CALIOP version 3 and version 4 data sets. Areas of improvement are highlighted, sources of continuing uncertainty are discussed and a list of best practices for data users is provided.

  12. Rock Visualization System. Technical description (RVS version 3.8)

    International Nuclear Information System (INIS)

    Curtis, P.; Elfstroem, M.; Markstroem, I.

    2007-06-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

  13. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  14. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

    2007-06-15

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  15. Rock Visualization System. Technical description (RVS version 3.8)

    International Nuclear Information System (INIS)

    Curtis, P.; Elfstroem, M.; Markstroem, I.

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

  16. Release of RANKERN 16A

    Directory of Open Access Journals (Sweden)

    Bird Adam

    2017-01-01

    Full Text Available RANKERN 16 is the latest version of the point-kernel gamma radiation transport Monte Carlo code from AMEC Foster Wheeler’s ANSWERS Software Service. RANKERN is well established in the UK shielding community for radiation shielding and dosimetry assessments. Many important developments have been made available to users in this latest release of RANKERN. The existing general 3D geometry capability has been extended to include import of CAD files in the IGES format providing efficient full CAD modelling capability without geometric approximation. Import of tetrahedral mesh and polygon surface formats has also been provided. An efficient voxel geometry type has been added suitable for representing CT data. There have been numerous input syntax enhancements and an extended actinide gamma source library. This paper describes some of the new features and compares the performance of the new geometry capabilities.

  17. Release of RANKERN 16A

    Science.gov (United States)

    Bird, Adam; Murphy, Christophe; Dobson, Geoff

    2017-09-01

    RANKERN 16 is the latest version of the point-kernel gamma radiation transport Monte Carlo code from AMEC Foster Wheeler's ANSWERS Software Service. RANKERN is well established in the UK shielding community for radiation shielding and dosimetry assessments. Many important developments have been made available to users in this latest release of RANKERN. The existing general 3D geometry capability has been extended to include import of CAD files in the IGES format providing efficient full CAD modelling capability without geometric approximation. Import of tetrahedral mesh and polygon surface formats has also been provided. An efficient voxel geometry type has been added suitable for representing CT data. There have been numerous input syntax enhancements and an extended actinide gamma source library. This paper describes some of the new features and compares the performance of the new geometry capabilities.

  18. National Radiobiology Archives Distributed Access User`s Manual, Version 1.1. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.K.; Prather, J.C.; Ligotke, E.K.; Watson, C.R.

    1992-06-01

    This supplement to the NRA Distributed Access User`s manual (PNL-7877), November 1991, describes installation and use of Version 1.1 of the software package; this is not a replacement of the previous manual. Version 1.1 of the NRA Distributed Access Package is a maintenance release. It eliminates several bugs, and includes a few new features which are described in this manual. Although the appearance of some menu screens has changed, we are confident that the Version 1.0 User`s Manual will provide an adequate introduction to the system. Users who are unfamiliar with Version 1.0 may wish to experiment with that version before moving on to Version 1.1.

  19. National Radiobiology Archives Distributed Access User's Manual, Version 1. 1

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.K.; Prather, J.C.; Ligotke, E.K.; Watson, C.R.

    1992-06-01

    This supplement to the NRA Distributed Access User's manual (PNL-7877), November 1991, describes installation and use of Version 1.1 of the software package; this is not a replacement of the previous manual. Version 1.1 of the NRA Distributed Access Package is a maintenance release. It eliminates several bugs, and includes a few new features which are described in this manual. Although the appearance of some menu screens has changed, we are confident that the Version 1.0 User's Manual will provide an adequate introduction to the system. Users who are unfamiliar with Version 1.0 may wish to experiment with that version before moving on to Version 1.1.

  20. CMS releases new batch of LHC open data

    CERN Document Server

    Achintya Rao

    2016-01-01

    CMS makes 300 TB of high-quality data from the LHC available to the public through the CERN Open Data Portal.   A CMS collision event as seen in the built-in event display on the CERN Open Data Portal (Image: CERN) The CMS collaboration has made 300 TB of high-quality data from the LHC available to the public through the CERN Open Data Portal. The collision data come in two types: The so-called “primary datasets” are in the same format used by the CMS Collaboration to perform research. The “derived datasets” on the other hand require a lot less computing power and can be readily analysed by university or even high-school students. Notably, CMS is also providing the simulated data generated with the same software version that should be used to analyse the primary datasets. Simulations play a crucial role in particle-physics research and CMS is also making available the protocols for generating the simulations that are provided. The data release is accompanie...

  1. Toxics Release Inventory (TRI)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Toxics Release Inventory (TRI) is a dataset compiled by the U.S. Environmental Protection Agency (EPA). It contains information on the release and waste...

  2. 50 CFR 600.425 - Release of statistics.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Release of statistics. 600.425 Section 600... ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Confidentiality of Statistics § 600.425 Release of statistics. (a) The Assistant Administrator will not release to the public any statistics...

  3. TAE+ 5.2 - TRANSPORTABLE APPLICATIONS ENVIRONMENT PLUS, VERSION 5.2 (DEC RISC ULTRIX VERSION)

    Science.gov (United States)

    TAE SUPPORT OFFICE

    1994-01-01

    programs to display and control the user interfaces. Since the WPTs access the workbench-generated resource files during each execution, details such as color, font, location, and object type remain independent from the application code, allowing changes to the user interface without recompiling and relinking. In addition to WPTs, TAE Plus can control interaction of objects from the interpreted TAE Command Language. TCL provides a means for the more experienced developer to quickly prototype an application's use of TAE Plus interaction objects and add programming logic without the overhead of compiling or linking. TAE Plus requires MIT's X Window System and the Open Software Foundation's Motif. The HP 9000 Series 700/800 version of TAE 5.2 requires Version 11 Release 5 of the X Window System. All other machine versions of TAE 5.2 require Version 11, Release 4 of the X Window System. The Workbench and WPTs are written in C++ and the remaining code is written in C. TAE Plus is available by license for an unlimited time period. The licensed program product includes the TAE Plus source code and one set of supporting documentation. Additional documentation may be purchased separately at the price indicated below. The amount of disk space required to load the TAE Plus tar format tape is between 35Mb and 67Mb depending on the machine version. The recommended minimum memory is 12Mb. Each TAE Plus platform delivery tape includes pre-built libraries and executable binary code for that particular machine, as well as source code, so users do not have to do an installation. Users wishing to recompile the source will need both a C compiler and either GNU's C++ Version 1.39 or later, or a C++ compiler based on AT&T 2.0 cfront. TAE Plus was developed in 1989 and version 5.2 was released in 1993. TAE Plus 5.2 is available on media suitable for five different machine platforms: (1) IBM RS/6000 series workstations running AIX (.25 inch tape cartridge in UNIX tar format), (2) DEC RISC

  4. GENII Version 2 Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

  5. JEnsembl: a version-aware Java API to Ensembl data systems.

    Science.gov (United States)

    Paterson, Trevor; Law, Andy

    2012-11-01

    The Ensembl Project provides release-specific Perl APIs for efficient high-level programmatic access to data stored in various Ensembl database schema. Although Perl scripts are perfectly suited for processing large volumes of text-based data, Perl is not ideal for developing large-scale software applications nor embedding in graphical interfaces. The provision of a novel Java API would facilitate type-safe, modular, object-orientated development of new Bioinformatics tools with which to access, analyse and visualize Ensembl data. The JEnsembl API implementation provides basic data retrieval and manipulation functionality from the Core, Compara and Variation databases for all species in Ensembl and EnsemblGenomes and is a platform for the development of a richer API to Ensembl datasources. The JEnsembl architecture uses a text-based configuration module to provide evolving, versioned mappings from database schema to code objects. A single installation of the JEnsembl API can therefore simultaneously and transparently connect to current and previous database instances (such as those in the public archive) thus facilitating better analysis repeatability and allowing 'through time' comparative analyses to be performed. Project development, released code libraries, Maven repository and documentation are hosted at SourceForge (http://jensembl.sourceforge.net).

  6. TRANSLATION, VALIDATION AND PSYCHOMETRIC EVALUATION OF PROBLEM AREAS IN DIABETES QUESTIONNAIRE: THE URDU VERSION

    OpenAIRE

    Sajjad Haider, Marvi Baloch, Qaiser Iqbal and Fahad Saleem

    2017-01-01

    Objective: The study aims to translate and examine the psychometric properties of the Urdu version of Problem Areas in Diabetes (PAID) questionnaire among Type 2 diabetic patients (T2DM) in Quetta, Pakistan. Method: A standard ‘‘forward–backward’’ procedure of translation was used to translate the English version of PAID into Urdu (official language of Pakistan). The translated version was then validated on a convenience sample of 120 T2DM patients attending a public hospital in Quetta, Pakis...

  7. ELIPGRID-PC: Upgraded version

    International Nuclear Information System (INIS)

    Davidson, J.R.

    1995-12-01

    Evaluating the need for and the effectiveness of remedial cleanup at waste sites often includes finding average contaminant concentrations and identifying pockets of contamination called hot spots. The standard tool for calculating the probability of detecting pockets of contamination called hot spots has been the ELIPGRID code of singer and Wickman. The ELIPGRID-PC program has recently made this algorithm available for an IBM reg-sign personal computer (PC) or compatible. A new version of ELIPGRID-PC, incorporating Monte Carlo test results and simple graphics, is herein described. Various examples of how to use the program for both single and multiple hot spot cases are given. The code for an American National Standards Institute C version of the ELIPGRID algorithm is provided, and limitations and further work are noted. This version of ELIPGRID-PC reliably meets the goal of moving Singer's ELIPGRID algorithm to the PC

  8. [Fetal version as ambulatory intervention].

    Science.gov (United States)

    Nohe, G; Hartmann, W; Klapproth, C E

    1996-06-01

    The external cephalic version (ECV) of the fetus at term reduces the maternal and fetal risks of intrapartum breech presentation and Caesarean delivery. Since 1986 over 800 external cephalic versions were performed in the outpatient Department of Obstetrics and Gynaecology of the Städtische Frauenklinik Stuttgart. 60.5% were successful. NO severe complications occurred. Sufficient amniotic fluid as well as the mobility of the fetal breech is a major criterion for the success of the ECV. Management requires a safe technique for mother and fetus. This includes ultrasonography, elektronic fetal monitoring and the ability to perform immediate caesarean delivery as well as the performance of ECV without analgesicas and sedatives. More than 70% of the ECV were successful without tocolysis. In unsuccessful cases the additional use of tocolysis improves the success rate only slightly. Therefore routine use of tocolysis does not appear necessary. External cephalic version can be recommended as an outpatient treatment without tocolysis.

  9. Expansion of ARAC for chemical releases

    International Nuclear Information System (INIS)

    Baskett, R.L.; Blair, M.D.; Foster, C.S.; Taylor, A.G.

    1997-01-01

    In 1996 the Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) completed an effort to expand its national emergency response modeling system for chemical releases. Key components of the new capability include the integration of (1) an extensive chemical property database, (2) source modeling for tanks and evaporating pools, (3) denser-than-air dispersion, (4) public exposure guidelines, and (5) an interactive graphical user interface (GUI). Recent use and the future of the new capability are also discussed

  10. EIA Publications Directory 1993

    International Nuclear Information System (INIS)

    1994-01-01

    This directory contains abstracts and ordering information for EIA publications released in the above time period. The abstracts are arranged by broad subject category such as coal, petroleum, natural gas, and electric power. A comprehensive subject index, a title index, and a report number index are included. Each entry gives the title, report number, publication frequency, date, number of pages, and ordering information

  11. BehavePlus fire modeling system, version 5.0: Variables

    Science.gov (United States)

    Patricia L. Andrews

    2009-01-01

    This publication has been revised to reflect updates to version 4.0 of the BehavePlus software. It was originally published as the BehavePlus fire modeling system, version 4.0: Variables in July, 2008.The BehavePlus fire modeling system is a computer program based on mathematical models that describe wildland fire behavior and effects and the...

  12. Publicity and public relations

    Science.gov (United States)

    Fosha, Charles E.

    1990-01-01

    This paper addresses approaches to using publicity and public relations to meet the goals of the NASA Space Grant College. Methods universities and colleges can use to publicize space activities are presented.

  13. HOTSPOT, Field Evaluation of Radiation Release from Nuclear Accident

    International Nuclear Information System (INIS)

    2001-01-01

    1 - Description of program or function: The HOTSPOT Health Physics codes were created to provide Health Physics personnel with a fast, field-portable calculational tool for evaluating accidents involving radioactive materials. HOTSPOT codes are a first-order approximation of the radiation effects associated with the atmospheric release of radioactive materials. HOTSPOT programs are reasonably accurate for a timely initial assessment. More importantly, HOTSPOT codes produce a consistent output for the same input assumptions and minimize the probability of errors associated with reading a graph incorrectly or scaling a universal nomogram during an emergency. Four general programs, PLUME, EXPLOSION, FIRE, and RESUSPENSION, calculate a downwind assessment following the release of radioactive material resulting from a continuous or puff release, explosive release, fuel fire, or an area contamination event. Other programs deal with the release of plutonium, uranium, and tritium to expedite an initial assessment of accidents involving nuclear weapons. Additional programs estimate the dose commitment from inhalation of any one of the radionuclides listed in the database of radionuclides, calibrate a radiation survey instrument for ground survey measurements, and screening of plutonium uptake in the lung. The HOTSPOT codes are fast, portable, easy to use, and fully documented. HOTSPOT supports color high resolution monitors and printers for concentration plots and contours. The codes have been extensively used by the DOS community since 1985. Version 8 allows users to add their own custom radionuclide library and to create custom radionuclide mixtures. It also includes wet deposition to approximate the enhanced plume depletion and ground deposition due to the effects of rain. Additional release geometry options for TRITIUM RELEASE and GENERAL PLUME were added, as well as several other enhancements and improvements. See info (f1) from the main HOTSPOT menu for additional

  14. MEASUREMENT AND PRECISION, EXPERIMENTAL VERSION.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    THIS DOCUMENT IS AN EXPERIMENTAL VERSION OF A PROGRAMED TEXT ON MEASUREMENT AND PRECISION. PART I CONTAINS 24 FRAMES DEALING WITH PRECISION AND SIGNIFICANT FIGURES ENCOUNTERED IN VARIOUS MATHEMATICAL COMPUTATIONS AND MEASUREMENTS. PART II BEGINS WITH A BRIEF SECTION ON EXPERIMENTAL DATA, COVERING SUCH POINTS AS (1) ESTABLISHING THE ZERO POINT, (2)…

  15. PATIENT - 2 year report (2013 - 2014) public version

    NARCIS (Netherlands)

    Drachsler, Hendrik; Henn, Patrick; Hynes, Helen; Stieger, Lina; Schroeder, Hanna; Sopka, Sasa; Hartkopf, Kathleen; Orrego, Carola

    2014-01-01

    This report extends the first project report with a summary of the latest activities of the second year of the PATIENT project. The first report provided an overview about empirical studies of the stakeholder needs, as conducted in WP2, and the target learning outcomes of the handover study

  16. A Nobel prize to public science communication (Italian original version

    Directory of Open Access Journals (Sweden)

    Pietro Greco

    2007-12-01

    Full Text Available The Norwegian Nobel Committee has bestowed the 2007 Nobel Peace Price equally upon the scientists of the Intergovernmental Panel on Climate Change (IPCC and Al Gore, former vice-President of the United States of America, with the same motivation: «for their efforts to build up and disseminate greater knowledge about man-made climate change, and to lay the foundations for the measures that are needed to counteract such change».

  17. Amyris, Inc. Integrated Biorefinery Project Summary Final Report - Public Version

    Energy Technology Data Exchange (ETDEWEB)

    Gray, David; Sato, Suzanne; Garcia, Fernando; Eppler, Ross; Cherry, Joel

    2014-03-12

    The Amyris pilot-scale Integrated Biorefinery (IBR) leveraged Amyris synthetic biology and process technology experience to upgrade Amyris’s existing Emeryville, California pilot plant and fermentation labs to enable development of US-based production capabilities for renewable diesel fuel and alternative chemical products. These products were derived semi-synthetically from high-impact biomass feedstocks via microbial fermentation to the 15-carbon intermediate farnesene, with subsequent chemical finishing to farnesane. The Amyris IBR team tested and provided methods for production of diesel and alternative chemical products from sweet sorghum, and other high-impact lignocellulosic feedstocks, at pilot scale. This enabled robust techno-economic analysis (TEA), regulatory approvals, and a basis for full-scale manufacturing processes and facility design.

  18. Bringing your tools to CyVerse Discovery Environment using Docker [version 2; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Upendra Kumar Devisetty

    2016-11-01

    Full Text Available Docker has become a very popular container-based virtualization platform for software distribution that has revolutionized the way in which scientific software and software dependencies (software stacks can be packaged, distributed, and deployed. Docker makes the complex and time-consuming installation procedures needed for scientific software a one-time process. Because it enables platform-independent installation, versioning of software environments, and easy redeployment and reproducibility, Docker is an ideal candidate for the deployment of identical software stacks on different compute environments such as XSEDE and Amazon AWS. Cyverse's Discovery Environment also uses Docker for integrating its powerful, community-recommended software tools into CyVerse's production environment for public use. This paper will help users bring their tools into CyVerse DE which will not only allows users to integrate their tools with relative ease compared to the earlier method of tool deployment in DE but also help users to share their apps with collaborators and also release them for public use.

  19. Bringing your tools to CyVerse Discovery Environment using Docker [version 3; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Upendra Kumar Devisetty

    2016-12-01

    Full Text Available Docker has become a very popular container-based virtualization platform for software distribution that has revolutionized the way in which scientific software and software dependencies (software stacks can be packaged, distributed, and deployed. Docker makes the complex and time-consuming installation procedures needed for scientific software a one-time process. Because it enables platform-independent installation, versioning of software environments, and easy redeployment and reproducibility, Docker is an ideal candidate for the deployment of identical software stacks on different compute environments such as XSEDE and Amazon AWS. Cyverse's Discovery Environment also uses Docker for integrating its powerful, community-recommended software tools into CyVerse's production environment for public use. This paper will help users bring their tools into CyVerse DE which will not only allows users to integrate their tools with relative ease compared to the earlier method of tool deployment in DE but also help users to share their apps with collaborators and also release them for public use.

  20. Bringing your tools to CyVerse Discovery Environment using Docker [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Upendra Kumar Devisetty

    2016-06-01

    Full Text Available Docker has become a very popular container-based virtualization platform for software distribution that has revolutionized the way in which scientific software and software dependencies (software stacks can be packaged, distributed, and deployed. Docker makes the complex and time-consuming installation procedures needed for scientific software a one-time process. Because it enables platform-independent installation, versioning of software environments, and easy redeployment and reproducibility, Docker is an ideal candidate for the deployment of identical software stacks on different compute environments such as XSEDE and Amazon AWS. CyVerse’s Discovery Environment also uses Docker for integrating its powerful, community-recommended software tools into CyVerse’s production environment for public use. This paper will help users bring their tools into CyVerse Discovery Environment (DE which will not only allows users to integrate their tools with relative ease compared to the earlier method of tool deployment in DE but will also help users to share their apps with collaborators and release them for public use.

  1. A fully updated version of the european utility requirement (EUR) document is available

    International Nuclear Information System (INIS)

    Berbey, P.

    2001-01-01

    The major European electricity producers have worked on a common requirement document for future LWR plants since 1992 to get specifications acceptable together by the owners, the public and the authorities. Thus the designers can develop standard LWR designs that could be acceptable everywhere in Europe and the utilities can open their consultations to vendors on common bases. Public and authority's acceptance should be improved as well. Significant savings are expected in development and construction costs. Since the release of the last versions of the EUR texts in 1996, a lot of work has been carried out: reviews by the regulators and other external organisations, comparisons, assessment of compliance of designs vs. EUR and clarification works on the controversial topics that deserved changes or clarification. At the beginning of 1999 enough material was available to start a complete revision of the EUR document. In-depth works have been carried out during the last couple of year to develop this revision. The European utilities and the vendors have now an updated and well-tuned tool that allow them to develop, to assess and eventually to order modern LWR designs well fitted to their actual needs. (author)

  2. Validation of software releases for CMS

    International Nuclear Information System (INIS)

    Gutsche, Oliver

    2010-01-01

    The CMS software stack currently consists of more than 2 Million lines of code developed by over 250 authors with a new version being released every week. CMS has setup a validation process for quality assurance which enables the developers to compare the performance of a release to previous releases and references. The validation process provides the developers with reconstructed datasets of real data and MC samples. The samples span the whole range of detector effects and important physics signatures to benchmark the performance of the software. They are used to investigate interdependency effects of all CMS software components and to find and fix bugs. The release validation process described here is an integral part of CMS software development and contributes significantly to ensure stable production and analysis. It represents a sizable contribution to the overall MC production of CMS. Its success emphasizes the importance of a streamlined release validation process for projects with a large code basis and significant number of developers and can function as a model for future projects.

  3. CALIPSO lidar calibration at 532 nm: version 4 nighttime algorithm

    Science.gov (United States)

    Kar, Jayanta; Vaughan, Mark A.; Lee, Kam-Pui; Tackett, Jason L.; Avery, Melody A.; Garnier, Anne; Getzewich, Brian J.; Hunt, William H.; Josset, Damien; Liu, Zhaoyan; Lucker, Patricia L.; Magill, Brian; Omar, Ali H.; Pelon, Jacques; Rogers, Raymond R.; Toth, Travis D.; Trepte, Charles R.; Vernier, Jean-Paul; Winker, David M.; Young, Stuart A.

    2018-03-01

    Data products from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) were recently updated following the implementation of new (version 4) calibration algorithms for all of the Level 1 attenuated backscatter measurements. In this work we present the motivation for and the implementation of the version 4 nighttime 532 nm parallel channel calibration. The nighttime 532 nm calibration is the most fundamental calibration of CALIOP data, since all of CALIOP's other radiometric calibration procedures - i.e., the 532 nm daytime calibration and the 1064 nm calibrations during both nighttime and daytime - depend either directly or indirectly on the 532 nm nighttime calibration. The accuracy of the 532 nm nighttime calibration has been significantly improved by raising the molecular normalization altitude from 30-34 km to the upper possible signal acquisition range of 36-39 km to substantially reduce stratospheric aerosol contamination. Due to the greatly reduced molecular number density and consequently reduced signal-to-noise ratio (SNR) at these higher altitudes, the signal is now averaged over a larger number of samples using data from multiple adjacent granules. Additionally, an enhanced strategy for filtering the radiation-induced noise from high-energy particles was adopted. Further, the meteorological model used in the earlier versions has been replaced by the improved Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), model. An aerosol scattering ratio of 1.01 ± 0.01 is now explicitly used for the calibration altitude. These modifications lead to globally revised calibration coefficients which are, on average, 2-3 % lower than in previous data releases. Further, the new calibration procedure is shown to eliminate biases at high altitudes that were present in earlier versions and consequently leads to an improved representation of

  4. Herwig++ 2.3 Release Note

    CERN Document Server

    Bähr, M; Gigg, M; Grellscheid, D; Hamilton, K; Plätzer, S; Richardson, P; Seymour, M H; Tully, J

    2008-01-01

    A new release of the Monte Carlo program Herwig++ (version 2.3) is now available. This version includes a number of improvements including: the extension of the program to lepton-hadron collisions; the inclusion of several processes accurate at next-to-leading order in the POsitive Weight Hardest Emission Generator (POWHEG) scheme; the inclusion of three-body decays and finite-width effects in Beyond the Standard Model (BSM) physics processes; a new procedure for reconstructing the kinematics of the parton shower based on the colour structure of the hard scattering process; a new model for baryon decays including excited baryon multiplets; the addition of a soft component to the multiple scattering model of the underlying event; new matrix elements for Deep Inelastic Scattering (DIS) and e+e- processes.

  5. Herwig++ 2.7 release note

    International Nuclear Information System (INIS)

    Bellm, J.; Gieseke, S.; Grellscheid, D.

    2013-10-01

    A new release of the Monte Carlo event generator Herwig++ (version 2.7) is now available. This version comes with a number of improvements including: an interface to the Universal FeynRules Output (UFO) format allowing the simulation of a wide range of new-physics models; developments of the Matchbox framework for next-to-leading order (NLO) simulations; better treatment of QCD radiation in heavy particle decays in new-physics models; a new tune of underlying event and colour connection parameters that allows a good simultaneous description of both Tevatron and LHC underlying event data and the effective cross-section parameter for double-parton scattering parameter σ eff .

  6. Herwig++ 2.7 release note

    Energy Technology Data Exchange (ETDEWEB)

    Bellm, J.; Gieseke, S. [Karlsruher Institut fuer Technologie, Karlsruhe (Germany). Inst. fuer Theoretische Physik; Grellscheid, D. [IPPP, Durham (United Kingdom). Dept. of Physics] [and others

    2013-10-15

    A new release of the Monte Carlo event generator Herwig++ (version 2.7) is now available. This version comes with a number of improvements including: an interface to the Universal FeynRules Output (UFO) format allowing the simulation of a wide range of new-physics models; developments of the Matchbox framework for next-to-leading order (NLO) simulations; better treatment of QCD radiation in heavy particle decays in new-physics models; a new tune of underlying event and colour connection parameters that allows a good simultaneous description of both Tevatron and LHC underlying event data and the effective cross-section parameter for double-parton scattering parameter {sigma}{sub eff}.

  7. User's Manual for LEWICE Version 3.2

    Science.gov (United States)

    Wright, William

    2008-01-01

    A research project is underway at NASA Glenn to produce a computer code which can accurately predict ice growth under a wide range of meteorological conditions for any aircraft surface. This report will present a description of the code inputs and outputs from version 3.2 of this software, which is called LEWICE. This version differs from release 2.0 due to the addition of advanced thermal analysis capabilities for de-icing and anti-icing applications using electrothermal heaters or bleed air applications, the addition of automated Navier-Stokes analysis, an empirical model for supercooled large droplets (SLD) and a pneumatic boot option. An extensive effort was also undertaken to compare the results against the database of electrothermal results which have been generated in the NASA Glenn Icing Research Tunnel (IRT) as was performed for the validation effort for version 2.0. This report will primarily describe the features of the software related to the use of the program. Appendix A has been included to list some of the inner workings of the software or the physical models used. This information is also available in the form of several unpublished documents internal to NASA. This report is intended as a replacement for all previous user manuals of LEWICE. In addition to describing the changes and improvements made for this version, information from previous manuals may be duplicated so that the user will not need to consult previous manuals to use this software.

  8. NCDC International Best Track Archive for Climate Stewardship (IBTrACS) Project, Version 2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2 of the dataset has been superseded by a newer version. Users should not use version 2 except in rare cases (e.g., when reproducing previous studies that...

  9. NCDC International Best Track Archive for Climate Stewardship (IBTrACS) Project, Version 1 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 1 of the dataset has been superseded by a newer version. Users should not use version 1 except in rare cases (e.g., when reproducing previous studies that...

  10. Large scientific releases

    International Nuclear Information System (INIS)

    Pongratz, M.B.

    1981-01-01

    The motivation for active experiments in space is considered, taking into account the use of active techniques to obtain a better understanding of the natural space environment, the utilization of the advantages of space as a laboratory to study fundamental plasma physics, and the employment of active techniques to determine the magnitude, degree, and consequences of artificial modification of the space environment. It is pointed out that mass-injection experiments in space plasmas began about twenty years ago with the Project Firefly releases. Attention is given to mass-release techniques and diagnostics, operational aspects of mass release active experiments, the active observation of mass release experiments, active perturbation mass release experiments, simulating an artificial modification of the space environment, and active experiments to study fundamental plasma physics

  11. The FORM version of MINCER

    International Nuclear Information System (INIS)

    Larin, S.A.; Academy of Sciences of the USSR, Moscow; Tkachov, F.V.; McGill Univ., Montreal, PQ; Academy of Sciences of the USSR, Moscow; Vermaseren, J.A.M.

    1991-01-01

    The program MINCER for massless three-loop Feynman diagrams of the propagator type has been reprogrammed in the language of FORM. The new version is thoroughly optimized and can be run from a utility like the UNIX make, which allows one to conveniently process large numbers of diagrams. It has been used for some calculations that were previously not practical. (author). 22 refs.; 14 figs

  12. Public communications at the UJD

    International Nuclear Information System (INIS)

    2002-01-01

    This bulletin contains information about activities of the Nuclear Regulatory Authority of the Slovak Republic (UJD). In this leaflet the public communications activities at the UJD are presented. The level of public relations is one of the most sensitive areas in society life and it is one of the crucial factors of nuclear power acceptability both currently and in the future. The 'Atomic Act (130/1998 Coll.)' and the 'Freedom Information Act (211/2000 Co/l.)' are directly related to the presentation of objective data on population health and safety protection and on nuclear facility impacts upon man and his environment. In Slovakia, UJD holds the supreme competencies on nuclear safety public information. A major element of the information is to demonstrate that the field of nuclear energy use has its binding rules in the Slovak Republic and their observance is guaranteed by the state. A central state administration authority, UJD furnishes regular, comprehensible and independent information on installation nuclear safety, including information on the management of RAW, spent nuclear fuel, nuclear material and control and records thereof. As early as 1995 were the foundations laid at UJD for the concept of wide-ranging public information on UJD activity and nuclear installation safety by opening the Information Centre that provides through its activity public and media communications, which helps create in the public a favourable image on independent state surveillance over nuclear safety. UJD sends out 70-80 press releases on its domestic and foreign activities annually to the Slovak Press, dailies and electronic media. UJD is together with SUJB the publisher of the journal N uclear Energy Safety'. UJD domestic and foreign activities are published in UJD bulletins, Slovak and European Nuclear Society journals. UJD submits the Government each year the Report on Safety of Nuclear Installations and the Management of Spent Nuclear Fuel and RAW in the Slovak Republic

  13. The Integrated Tiger Series version 5.0

    International Nuclear Information System (INIS)

    Laub, Th.W.; Kensek, R.P.; Franke, B.C.; Lorence, L.J.; Crawford, M.J.; Quirk, Th.J.

    2005-01-01

    The Integrated Tiger Series (ITS) is a powerful and user-friendly software package permitting Monte Carlo solution of linear time-independent coupled electron/photon radiation transport problems, with or without the presence of macroscopic electric and magnetic fields of arbitrary spatial dependence. The package contains programs to perform 1-, 2-, and 3-dimensional simulations. Improvements in the ITS code package since the release of version 3.0 include improved physics, multigroup and adjoint capabilities, Computer-Aided Design geometry tracking, parallel implementations of all ITS codes, and more automated sub-zoning capabilities. These improvements and others are described as current or planned development efforts. The ITS package is currently at version 5.0. (authors)

  14. Verification and validation of RADMODL Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, K.D.

    1993-03-01

    RADMODL is a system of linked computer codes designed to calculate the radiation environment following an accident in which nuclear materials are released. The RADMODL code and the corresponding Verification and Validation (V&V) calculations (Appendix A), were developed for Westinghouse Savannah River Company (WSRC) by EGS Corporation (EGS). Each module of RADMODL is an independent code and was verified separately. The full system was validated by comparing the output of the various modules with the corresponding output of a previously verified version of the modules. The results of the verification and validation tests show that RADMODL correctly calculates the transport of radionuclides and radiation doses. As a result of this verification and validation effort, RADMODL Version 1.0 is certified for use in calculating the radiation environment following an accident.

  15. Verification and validation of RADMODL Version 1.0

    International Nuclear Information System (INIS)

    Kimball, K.D.

    1993-03-01

    RADMODL is a system of linked computer codes designed to calculate the radiation environment following an accident in which nuclear materials are released. The RADMODL code and the corresponding Verification and Validation (V ampersand V) calculations (Appendix A), were developed for Westinghouse Savannah River Company (WSRC) by EGS Corporation (EGS). Each module of RADMODL is an independent code and was verified separately. The full system was validated by comparing the output of the various modules with the corresponding output of a previously verified version of the modules. The results of the verification and validation tests show that RADMODL correctly calculates the transport of radionuclides and radiation doses. As a result of this verification and validation effort, RADMODL Version 1.0 is certified for use in calculating the radiation environment following an accident

  16. New version of the web based CERN Phonebook

    CERN Multimedia

    GS Department

    2011-01-01

    A new version of CERN’s web-based phonebook will be deployed during the weekend of 17/18 December 2011. The most important new feature will be the possibility to see the CERN identity card photo of every person listed in the phonebook who has a registered photo.   The photo will be available on each person's details page and will be visible to all employed and associated members of the personnel who have the appropriate authentication (i.e. those who log in using their AIS login). More information about other new features of the release will be available from 19 December 2011 from the webpage detailing the version history of the CERN phonebook.

  17. Independent Verification and Validation SAPHIRE Version 8 Final Report Project Number: N6423 U.S. Nuclear Regulatory Commission

    Energy Technology Data Exchange (ETDEWEB)

    Kent Norris

    2010-04-01

    This report provides an evaluation of the SAPHIRE version 8 software product. SAPHIRE version 8 is being developed with a phased or cyclic iterative rapid application development methodology. Due to this approach, a similar approach has been taken for the IV&V activities on each vital software object. IV&V and Software Quality Assurance (SQA) activities occur throughout the entire development life cycle and therefore, will be required through the full development of SAPHIRE version 8. Later phases of the software life cycle, the operation and maintenance phases, are not applicable in this effort since the IV&V is being done prior to releasing Version 8.

  18. Senate Republican leadership releases revised ACA repeal and replace bill

    Directory of Open Access Journals (Sweden)

    Moore NS

    2017-07-01

    Full Text Available No abstract available. Article truncated after first 150 words. Today, the Senate Republican leadership released a revised version of a bill to repeal and replace the Affordable Care Act (ACA. The new bill draft includes an amendment sponsored by Sen. Cruz (R-TX that permits insurers to offer health insurance plans on the ACA exchanges that do not cover the ACA’s 10 essential health benefits (EHB as long as they offer at least one other plan that provides full coverage of EHB’s. The bill also includes more funding for opioid addiction and for state initiatives to reduce insurance premiums and additionally, some flexibility for state Medicaid funding in the event of a public health crisis. The bill must still receive a cost estimate from the Congressional Budget Office (CBO, which will include the impact of the bill on insurance coverage levels, expected out Monday. The ATS remains deeply concerned about the bill because under the Cruz proposal, insurance coverage costs …

  19. Malicious release of radioactive materials in urban area. Exposure of the public and emergency staff, protective measures; Boeswillige Freisetzung radioaktiver Stoffe in urbanen Bereichen. Exposition von Bevoelkerung und Einsatzpersonal, Schutzmassnahmen

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Wolfgang [Fraunhofer-Institut fuer Toxikologie und Experimentelle Medizin ITEM, Hannover (Germany). Bereich Aerosolforschung und Analytische Chemie; Lange, Florentin

    2016-07-01

    The preparedness for hypothetical radiological scenarios is part of the tasks for governmental authorities, safety and emergency organizations and the staff in case of the incident. The EURATOM guideline for radiation protection has to be implemented into national laws. According to the guidelines it is required that emergency planning has to be prepared for hypothetical radiological scenarios including terroristic or other maliciously motivated attacks using radioactive materials. The study includes assumptions on the released respirable radioactivity, restriction of the hazardous area, wind induced re-suspension of radioactive dusts and inhalation exposure, and mitigation measures.

  20. The propagation effect of paper version and the iPad version for periodicals

    Directory of Open Access Journals (Sweden)

    Cong Zhang

    2015-04-01

    Full Text Available Purpose: Digital journal created a new development pattern. We use journal APP as an example to analyze how to migrate the journal content to Internet and other kind of media. Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards operation of new media, offered the tendency of mobile device platform development for China’s periodical publications. Design/methodology/approach: control experiment. Findings: The authors give a stance that the print edition of periodical publication will being alive still, and conclude that journal APP and printed version can be mutually beneficial and achieve a win-win state. And we believe that the journal APP is good at advertising propagation, which will accelerate the development of journal APP in such the information age, and such kind of media can integrate many information with variety of media forms. Research limitations/implications: Because of the limitation of technology, the authors only have the experiment on fashion magazine, which might to some degree simplify the issue under discussion. Practical implications: According to the conclusion of a series of experiments, we can imply the future of the media, and give the suggestion of both paper version and ipad version of the journal. Social implications: Since people can not live without media and media has to develope with the help of public, we have to give the new way of both sunrise media and sunset media. Originality/value: Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards

  1. Gaia Data Release 1. Catalogue validation

    NARCIS (Netherlands)

    Arenou, F.; Luri, X.; Babusiaux, C.; Fabricius, C.; Helmi, A.; Robin, A. C.; Vallenari, A.; Blanco-Cuaresma, S.; Cantat-Gaudin, T.; Findeisen, K.; Reylé, C.; Ruiz-Dern, L.; Sordo, R.; Turon, C.; Walton, N. A.; Shih, I.-C.; Antiche, E.; Barache, C.; Barros, M.; Breddels, M.; Carrasco, J. M.; Costigan, G.; Diakité, S.; Eyer, L.; Figueras, F.; Galluccio, L.; Heu, J.; Jordi, C.; Krone-Martins, A.; Lallement, R.; Lambert, S.; Leclerc, N.; Marrese, P. M.; Moitinho, A.; Mor, R.; Romero-Gómez, M.; Sartoretti, P.; Soria, S.; Soubiran, C.; Souchay, J.; Veljanoski, J.; Ziaeepour, H.; Giuffrida, G.; Pancino, E.; Bragaglia, A.

    Context. Before the publication of the Gaia Catalogue, the contents of the first data release have undergone multiple dedicated validation tests. Aims: These tests aim to provide in-depth analysis of the Catalogue content in order to detect anomalies and individual problems in specific objects or in

  2. New Source Term Model for the RESRAD-OFFSITE Code Version 3

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States); Gnanapragasam, Emmanuel [Argonne National Lab. (ANL), Argonne, IL (United States); Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, Shih-Yew [Argonne National Lab. (ANL), Argonne, IL (United States)

    2013-06-01

    This report documents the new source term model developed and implemented in Version 3 of the RESRAD-OFFSITE code. This new source term model includes: (1) "first order release with transport" option, in which the release of the radionuclide is proportional to the inventory in the primary contamination and the user-specified leach rate is the proportionality constant, (2) "equilibrium desorption release" option, in which the user specifies the distribution coefficient which quantifies the partitioning of the radionuclide between the solid and aqueous phases, and (3) "uniform release" option, in which the radionuclides are released from a constant fraction of the initially contaminated material during each time interval and the user specifies the duration over which the radionuclides are released.

  3. Versions of the Waste Reduction Model (WARM)

    Science.gov (United States)

    This page provides a brief chronology of changes made to EPA’s Waste Reduction Model (WARM), organized by WARM version number. The page includes brief summaries of changes and updates since the previous version.

  4. GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (UNIX VERSION)

    Science.gov (United States)

    Desjardins, M. L.

    1994-01-01

    regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

  5. Implications of SNOMED CT versioning

    NARCIS (Netherlands)

    Lee, Dennis; Cornet, Ronald; Lau, Francis

    2011-01-01

    To determine the changes each Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT) release undergoes and the implications of those changes. (1) We reviewed the SNOMED CT Component History documentation and analyzed the Component History table in detail. (2) We outlined a list of semantic

  6. Public relations

    International Nuclear Information System (INIS)

    1998-01-01

    The Nuclear Regulatory Authority of the Slovak Republic (NRA SR) laid the foundation of a policy of keeping the public informed about the activities and the safety of nuclear installations in the SR already in its origins by opening the NRA Information Centre. The NRA SR issues the Bulletin on NRA SR for domestic and foreign use, the bilingual Annual report on NRA activities for domestic and foreign public - detailed report for the specialists and a version for the Slovak Republic state authorities. On the occasion of the anniversary of the IAEA a special publication on the IAEA was prepared. Forty-nine contributions on NRA national and foreign activities were trans-missed to the Press Agency of the SR (TASR) over the course of 1997. In the journal Safety of Nuclear Energy the column 'Information' periodically carries the briefs on NRA activities. Four essential articles on NRA mission and responsibility in the are of peaceful uses of atomic energy were published in the Newsletter of the Slovak Information Agency (SIA). Contributions on NRA activities and international co-operation are periodically put out in the 'Slovenske elektrarne' Newsletter, the Slovak Nuclear Society Bulletin. Report on the Safety of NPPs in the Slovak Republic is annually published in the Journal European Nuclear Society - Nuclear Europe Worldscan. Some articles on NRA activities were published in the world information agency NucNet. The NRA issued in 1997 four editions of the internal Bulletin on the NRA's national and foreign activities and personnel. Three press conferences were held and six events were arranged in radio broadcasting in 1997

  7. VizieR Online Data Catalog: The SDSS Photometric Catalogue, Release 12 (Alam+, 2015)

    Science.gov (United States)

    Alam, S.; et al.

    2016-03-01

    Data Release 12 (DR12) is the final data release of the SDSS-III, containing all SDSS observations through July 2014. It includes the complete dataset of the BOSS and APOGEE surveys, and also newly includes stellar radial velocity measurements from MARVELS. The principal changes from previous versions are summarized at http://www.sdss.org/dr12/whatsnew/ (1 data file).

  8. A Systems Engineering Capability Maturity Model, Version 1.1,

    Science.gov (United States)

    1995-11-01

    of a sequence of actions to be taken to perform a given task. [SECMM] 1. A set of activities ( ISO 12207 ). 2. A set of practices that address the...standards One of the design goals of the SE-CMM effort was to capture the salient concepts from emerging standards and initiatives (e.g.; ISO 9001...history for the SE-CMM: Version Designator Content Change Notes Release 1 • architecture rationale • Process Areas • ISO (SPICE) BPG 0.05 summary

  9. New features in McStas, version 1.5

    DEFF Research Database (Denmark)

    Åstrand, P.O.; Lefmann, K.; Farhi, E.

    2002-01-01

    The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components......, and interface to the Riso instrument-control software TASCOM. We give a general introduction to McStas and present the latest developments. In particular, we give an example of how the neutron-label option has been used to locate the origin of a spurious side-peak, observed in an experiment with RITA-1 at Riso....

  10. New features in McStas, version 1.5

    International Nuclear Information System (INIS)

    Aastrand, P.O.; Lefmann, K.; Nielsen, K.; Skaarup, P.; Farhi, E.

    2002-01-01

    The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components, and interface to the Riso instrument-control software TASCOM. We give a general introduction to McStas and present the latest developments. In particular, we give an example of how the neutron-label option has been used to locate the origin of a spurious side-peak, observed in an experiment with RITA-1 at Riso. (orig.)

  11. Inclusion in the Workplace - Text Version | NREL

    Science.gov (United States)

    Careers » Inclusion in the Workplace - Text Version Inclusion in the Workplace - Text Version This is the text version for the Inclusion: Leading by Example video. I'm Martin Keller. I'm the NREL of the laboratory. Another very important element in inclusion is diversity. Because if we have a

  12. A constructive version of AIP revisited

    NARCIS (Netherlands)

    Barros, A.; Hou, T.

    2008-01-01

    In this paper, we review a constructive version of the Approximation Induction Principle. This version states that bisimilarity of regular processes can be decided by observing only a part of their behaviour. We use this constructive version to formulate a complete inference system for the Algebra

  13. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    effects of an output with respect to a change in a particular input. The second method traces backward to determine what modules must be re-executed if the output of a module must be recomputed. DeMAID is available in three machine versions: a Macintosh version which is written in Symantec's Think C 3.01, a Sun version, and an SGI IRIS version, both of which are written in C language. The Macintosh version requires system software 6.0.2 or later and CLIPS 4.3. The source code for the Macintosh version will not compile under version 4.0 of Think C; however, a sample executable is provided on the distribution media. QuickDraw is required for plotting. The Sun version requires GKS 4.1 graphics libraries, OpenWindows 3, and CLIPS 4.3. The SGI IRIS version requires CLIPS 4.3. Since DeMAID is not compatible with CLIPS 5.0 or later, the source code for CLIPS 4.3 is included on the distribution media; however, the documentation for CLIPS 4.3 is not included in the documentation package for DeMAID. It is available from COSMIC separately as the documentation for MSC-21208. The standard distribution medium for the Macintosh version of DeMAID is a set of four 3.5 inch 800K Macintosh format diskettes. The standard distribution medium for the Sun version of DeMAID is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. The standard distribution medium for the IRIS version is a .25 inch IRIX compatible streaming magnetic tape cartridge in UNIX tar format. All versions include sample input. DeMAID was originally developed for use on VAX VMS computers in 1989. The Macintosh version of DeMAID was released in 1991 and updated in 1992. The Sun version of DeMAID was released in 1992 and updated in 1993. The SGI IRIS version was released in 1993.

  14. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    effects of an output with respect to a change in a particular input. The second method traces backward to determine what modules must be re-executed if the output of a module must be recomputed. DeMAID is available in three machine versions: a Macintosh version which is written in Symantec's Think C 3.01, a Sun version, and an SGI IRIS version, both of which are written in C language. The Macintosh version requires system software 6.0.2 or later and CLIPS 4.3. The source code for the Macintosh version will not compile under version 4.0 of Think C; however, a sample executable is provided on the distribution media. QuickDraw is required for plotting. The Sun version requires GKS 4.1 graphics libraries, OpenWindows 3, and CLIPS 4.3. The SGI IRIS version requires CLIPS 4.3. Since DeMAID is not compatible with CLIPS 5.0 or later, the source code for CLIPS 4.3 is included on the distribution media; however, the documentation for CLIPS 4.3 is not included in the documentation package for DeMAID. It is available from COSMIC separately as the documentation for MSC-21208. The standard distribution medium for the Macintosh version of DeMAID is a set of four 3.5 inch 800K Macintosh format diskettes. The standard distribution medium for the Sun version of DeMAID is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. The standard distribution medium for the IRIS version is a .25 inch IRIX compatible streaming magnetic tape cartridge in UNIX tar format. All versions include sample input. DeMAID was originally developed for use on VAX VMS computers in 1989. The Macintosh version of DeMAID was released in 1991 and updated in 1992. The Sun version of DeMAID was released in 1992 and updated in 1993. The SGI IRIS version was released in 1993.

  15. Earnings Public-Use File, 2006

    Data.gov (United States)

    Social Security Administration — Social Security Administration released Earnings Public-Use File (EPUF) for 2006. File contains earnings information for individuals drawn from a systematic random...

  16. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (DEC VAX VMS VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory

  17. EIA new releases

    International Nuclear Information System (INIS)

    1994-09-01

    This report is a compliation of news releases from the Energy Information Administration. The september-october report includes articles on energy conservation, energy consumption in commercial buildings, and a short term energy model for a personal computer

  18. Embrittlement data base, version 1

    International Nuclear Information System (INIS)

    Wang, J.A.

    1997-08-01

    The aging and degradation of light-water-reactor (LWR) pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel (RPV) materials depends on many different factors such as flux, fluence, fluence spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Based on embrittlement predictions, decisions must be made concerning operating parameters and issues such as low-leakage-fuel management, possible life extension, and the need for annealing the pressure vessel. Large amounts of data from surveillance capsules and test reactor experiments, comprising many different materials and different irradiation conditions, are needed to develop generally applicable damage prediction models that can be used for industry standards and regulatory guides. Version 1 of the Embrittlement Data Base (EDB) is such a comprehensive collection of data resulting from merging version 2 of the Power Reactor Embrittlement Data Base (PR-EDB). Fracture toughness data were also integrated into Version 1 of the EDB. For power reactor data, the current EDB lists the 1,029 Charpy transition-temperature shift data points, which include 321 from plates, 125 from forgoings, 115 from correlation monitor materials, 246 from welds, and 222 from heat-affected-zone (HAZ) materials that were irradiated in 271 capsules from 101 commercial power reactors. For test reactor data, information is available for 1,308 different irradiated sets (352 from plates, 186 from forgoings, 303 from correlation monitor materials, 396 from welds and 71 from HAZs) and 268 different irradiated plus annealed data sets

  19. Strong versions of Bell's theorem

    International Nuclear Information System (INIS)

    Stapp, H.P.

    1994-01-01

    Technical aspects of a recently constructed strong version of Bell's theorem are discussed. The theorem assumes neither hidden variables nor factorization, and neither determinism nor counterfactual definiteness. It deals directly with logical connections. Hence its relationship with modal logic needs to be described. It is shown that the proof can be embedded in an orthodox modal logic, and hence its compatibility with modal logic assured, but that this embedding weakens the theorem by introducing as added assumptions the conventionalities of the particular modal logic that is adopted. This weakening is avoided in the recent proof by using directly the set-theoretic conditions entailed by the locality assumption

  20. ASPEN Version 3.0

    Science.gov (United States)

    Rabideau, Gregg; Chien, Steve; Knight, Russell; Schaffer, Steven; Tran, Daniel; Cichy, Benjamin; Sherwood, Robert

    2006-01-01

    The Automated Scheduling and Planning Environment (ASPEN) computer program has been updated to version 3.0. ASPEN is a modular, reconfigurable, application software framework for solving batch problems that involve reasoning about time, activities, states, and resources. Applications of ASPEN can include planning spacecraft missions, scheduling of personnel, and managing supply chains, inventories, and production lines. ASPEN 3.0 can be customized for a wide range of applications and for a variety of computing environments that include various central processing units and random access memories.

  1. PAV ontology: provenance, authoring and versioning.

    Science.gov (United States)

    Ciccarese, Paolo; Soiland-Reyes, Stian; Belhajjame, Khalid; Gray, Alasdair Jg; Goble, Carole; Clark, Tim

    2013-11-22

    Provenance is a critical ingredient for establishing trust of published scientific content. This is true whether we are considering a data set, a computational workflow, a peer-reviewed publication or a simple scientific claim with supportive evidence. Existing vocabularies such as Dublin Core Terms (DC Terms) and the W3C Provenance Ontology (PROV-O) are domain-independent and general-purpose and they allow and encourage for extensions to cover more specific needs. In particular, to track authoring and versioning information of web resources, PROV-O provides a basic methodology but not any specific classes and properties for identifying or distinguishing between the various roles assumed by agents manipulating digital artifacts, such as author, contributor and curator. We present the Provenance, Authoring and Versioning ontology (PAV, namespace http://purl.org/pav/): a lightweight ontology for capturing "just enough" descriptions essential for tracking the provenance, authoring and versioning of web resources. We argue that such descriptions are essential for digital scientific content. PAV distinguishes between contributors, authors and curators of content and creators of representations in addition to the provenance of originating resources that have been accessed, transformed and consumed. We explore five projects (and communities) that have adopted PAV illustrating their usage through concrete examples. Moreover, we present mappings that show how PAV extends the W3C PROV-O ontology to support broader interoperability. The initial design of the PAV ontology was driven by requirements from the AlzSWAN project with further requirements incorporated later from other projects detailed in this paper. The authors strived to keep PAV lightweight and compact by including only those terms that have demonstrated to be pragmatically useful in existing applications, and by recommending terms from existing ontologies when plausible. We analyze and compare PAV with related

  2. An update to the Surface Ocean CO2 Atlas (SOCAT version 2)

    Digital Repository Service at National Institute of Oceanography (India)

    Bakker, D.C.E.; Hankin, S.; Olsen, A; Pfeil, B.; Smith, K.; Alin, S.R.; Cosca, C.; Hales, B.; Harasawa, S.; Kozyr, A; Nojiri, Y.; OBrien, K.M.; Schuster, U.; Telszewski, M.; Tilbrook, B.; Wada, C.; Akl, J.; Barbero, L.; Bates, N.; Boutin, J.; Cai, W.J.; Castle, R.D.; Chavez, F.; Chen, L.; Chierici, M.; Currie, K.; Evans, W.; Feely, R.A; Fransson, A; Gao, Z.; Hardman-Mountford, N.; Hoppema, M.; Huang, W.J.; Hunt, C.W.; Huss, B.; Ichikawa, T.; Jacobson, A; Johannessen, T.; Jones, E.M.; Jones, S.; Sara, J.; Kitidis, V.; Kortzinger, A.; Lauvset, S.; Lefevre, N.; Manke, A.B.; Mathis, J.; Metzl, N.; Monteiro, P.; Murata, A.; Newberger, T.; Nobuo, T.; Ono, T.; Paterson, K.; Pierrot, D.; Rios, A.F.; Sabine, C.L.; Saito, S.; Salisbury, J.; Sarma, V.V.S.S.; Schlitzer, R.; Sieger, R.; Skjelvan, I.; Steinhoff, T.; Sullivan, K.; Sutherland, S.C.; Suzuki, T.; Sutton, A.; Sweeney, C.; Takahashi, T.; Tjiputra, J.; VanHeuven, S.; Vandemark, D.; Vlahos, P.; Wallace, D.W.R.; Wanninkhof, R.; Watson, A.J.

    of SOCAT is an update of the previous release (version 1) with more data (increased from 6.3 million to 10.1 million surface water fCO2 values) and extended data coverage (from 1968–2007 to 1968–2011). The quality control criteria, while...

  3. Committed dose equivalent per intake of unit activity of radionuclides, for four age-groups, concerning the members of the public for the environmental impact evaluation's of radioactive releases

    International Nuclear Information System (INIS)

    Breuer, F.; Brofferio, C.; Sacripanti, A.

    1983-01-01

    In the present work, with the aim of estimating more realistically the committed dose equivalent for the members of the public in the environmental impact evaluation's of nuclear plants, the authors supply a methodology for calculating the committed dose equivalents for inhalation and ingestion, and the values for fiftheen organs and sixi-three radionuclides, concerning four specific age-groups on the ground of data published by Icrp n.30 part 1, 2, 3

  4. Release Notes for Whisper-1.1

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Alwin, Jennifer Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-04-27

    Whisper is a statistical analysis package developed in 2014 to support nuclear criticality safety (NCS) validation [1-3]. It uses the sensitivity profile data for an application as computed by MCNP6 [4-6] along with covariance files [7,8] for the nuclear data to determine a baseline upper-subcritical-limit (USL) for the application. Whisper version 1.0 was first developed and used at LANL in 2014 [3]. During 2015-2016, Whisper was updated to version 1.1 [9] and is to be included with the upcoming release of MCNP6.2. This document describes the Whisper-1.1 package that will be included with the MCNP6.2 release during 2017. Specific details are provided on the computer systems supported, the software quality assurance (SQA) procedures, installation, and testing. This document does not address other important topics, such as the importance of sensitivity-uncertainty (SU) methods to NCS validation, the theory underlying SU methodology, tutorials on the usage of MCNP-Whisper, practical approaches to using SU methodology to support and extend traditional validation, etc. There are over 50 documents included with Whisper-1.1 and available in the MCNP Reference Collection on the MCNP website (mcnp.lanl.gov) that address all of those topics and more. In this document, however, a complete bibliography of relevant MCNP-Whisper references is provided.

  5. Publication of the bulletin

    CERN Document Server

    DSU Unit

    2008-01-01

    The final edition (Nos 51-52/2008 and 1-2/2009) of the last Weekly Bulletin of the year will be published on Friday 12 December and will cover events at CERN from 15 December 2008 to 12 January 2009. Announcements for publication in this issue should reach the Publication Section (Communication group) or the Staff Association, as appropriate by noon, on Tuesday 9 December. Bulletin publication 2009 The table below lists the 2009 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Publication date 3-4 Tuesday 6 January Monday 12 January 5-6 Tuesday 20 January Monday 26 January 7-8 Tuesday 3 February Monday 9 February 9-10 Tuesday 17 Februar...

  6. USGS library for S-PLUS for Windows -- Release 4.0

    Science.gov (United States)

    Lorenz, David L.; Ahearn, Elizabeth A.; Carter, Janet M.; Cohn, Timothy A.; Danchuk, Wendy J.; Frey, Jeffrey W.; Helsel, Dennis R.; Lee, Kathy E.; Leeth, David C.; Martin, Jeffrey D.; McGuire, Virginia L.; Neitzert, Kathleen M.; Robertson, Dale M.; Slack, James R.; Starn, J. Jeffrey; Vecchia, Aldo V.; Wilkison, Donald H.; Williamson, Joyce E.

    2011-01-01

    Release 4.0 of the U.S. Geological Survey S-PLUS library supercedes release 2.1. It comprises functions, dialogs, and datasets used in the U.S. Geological Survey for the analysis of water-resources data. This version does not contain ESTREND, which was in version 2.1. See Release 2.1 for information and access to that version. This library requires Release 8.1 or later of S-PLUS for Windows. S-PLUS is a commercial statistical and graphical analysis software package produced by TIBCO corporation(http://www.tibco.com/). The USGS library is not supported by TIBCO or its technical support staff.

  7. Verification of RESRAD-build computer code, version 3.1

    International Nuclear Information System (INIS)

    2003-01-01

    RESRAD-BUILD is a computer model for analyzing the radiological doses resulting from the remediation and occupancy of buildings contaminated with radioactive material. It is part of a family of codes that includes RESRAD, RESRAD-CHEM, RESRAD-RECYCLE, RESRAD-BASELINE, and RESRAD-ECORISK. The RESRAD-BUILD models were developed and codified by Argonne National Laboratory (ANL); version 1.5 of the code and the user's manual were publicly released in 1994. The original version of the code was written for the Microsoft DOS operating system. However, subsequent versions of the code were written for the Microsoft Windows operating system. The purpose of the present verification task (which includes validation as defined in the standard) is to provide an independent review of the latest version of RESRAD-BUILD under the guidance provided by ANSI/ANS-10.4 for verification and validation of existing computer programs. This approach consists of a posteriori V and V review which takes advantage of available program development products as well as user experience. The purpose, as specified in ANSI/ANS-10.4, is to determine whether the program produces valid responses when used to analyze problems within a specific domain of applications, and to document the level of verification. The culmination of these efforts is the production of this formal Verification Report. The first step in performing the verification of an existing program was the preparation of a Verification Review Plan. The review plan consisted of identifying: Reason(s) why a posteriori verification is to be performed; Scope and objectives for the level of verification selected; Development products to be used for the review; Availability and use of user experience; and Actions to be taken to supplement missing or unavailable development products. The purpose, scope and objectives for the level of verification selected are described in this section of the Verification Report. The development products that were used

  8. Verification of the 2.00 WAPPA-B [Waste Package Performance Assessment-B version] code

    International Nuclear Information System (INIS)

    Tylock, B.; Jansen, G.; Raines, G.E.

    1987-07-01

    The old version of the Waste Package Performance Assessment (WAPPA) code has been modified into a new code version, 2.00 WAPPA-B. The input files and the results for two benchmarks at repository conditions are fully documented in the appendixes of the EA reference report. The 2.00 WAPPA-B version of the code is suitable for computation of barrier failure due to uniform corrosion; however, an improved sub-version, 2.01 WAPPA-B, is recommended for general use due to minor errors found in 2.00 WAPPA-B during its verification procedures. The input files and input echoes have been modified to include behavior of both radionuclides and elements, but the 2.00 WAPPA-B version of the WAPPA code is not recommended for computation of radionuclide releases. The 2.00 WAPPA-B version computes only mass balances and the initial presence of radionuclides that can be released. Future code development in the 3.00 WAPPA-C version will include radionuclide release computations. 19 refs., 10 figs., 1 tab

  9. FEAT - FAILURE ENVIRONMENT ANALYSIS TOOL (UNIX VERSION)

    Science.gov (United States)

    Pack, G.

    1994-01-01

    coprocessor or coprocessor emulator and a color monitor (or one with 256 gray scale capability). A minimum of 4Mb of free RAM is highly recommended. The UNIX version of FEAT includes both FEAT v3.6 for the Macintosh and XFEAT. XFEAT is written in C-language for Sun series workstations running SunOS, SGI workstations running IRIX, DECstations running ULTRIX, and Intergraph workstations running CLIX version 6. It requires the MIT X Window System, Version 11 Revision 4, with OSF/Motif 1.1.3, and 16Mb of RAM. The standard distribution medium for FEAT 3.6 (Macintosh version) is a set of three 3.5 inch Macintosh format diskettes. The standard distribution package for the UNIX version includes the three FEAT 3.6 Macintosh diskettes plus a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format which contains XFEAT. Alternate distribution media and formats for XFEAT are available upon request. FEAT has been under development since 1990. Both FEAT v3.6 for the Macintosh and XFEAT v3.5 were released in 1993.

  10. ATP Release Channels

    Directory of Open Access Journals (Sweden)

    Akiyuki Taruno

    2018-03-01

    Full Text Available Adenosine triphosphate (ATP has been well established as an important extracellular ligand of autocrine signaling, intercellular communication, and neurotransmission with numerous physiological and pathophysiological roles. In addition to the classical exocytosis, non-vesicular mechanisms of cellular ATP release have been demonstrated in many cell types. Although large and negatively charged ATP molecules cannot diffuse across the lipid bilayer of the plasma membrane, conductive ATP release from the cytosol into the extracellular space is possible through ATP-permeable channels. Such channels must possess two minimum qualifications for ATP permeation: anion permeability and a large ion-conducting pore. Currently, five groups of channels are acknowledged as ATP-release channels: connexin hemichannels, pannexin 1, calcium homeostasis modulator 1 (CALHM1, volume-regulated anion channels (VRACs, also known as volume-sensitive outwardly rectifying (VSOR anion channels, and maxi-anion channels (MACs. Recently, major breakthroughs have been made in the field by molecular identification of CALHM1 as the action potential-dependent ATP-release channel in taste bud cells, LRRC8s as components of VRACs, and SLCO2A1 as a core subunit of MACs. Here, the function and physiological roles of these five groups of ATP-release channels are summarized, along with a discussion on the future implications of understanding these channels.

  11. A multi-decade record of high-quality fCO2 data in version 3 of the Surface Ocean CO2 Atlas (SOCAT)

    Science.gov (United States)

    Bakker, Dorothee; Landa, Camilla S.; Pfeil, Benjamin; Metzl, Nicolas; O’Brien, Kevin; Olsen, Are; Smith, Karl; Cosca, Cathy; Harasawa, Sumiko; Nakaoka, Shin-ichiro; Jones, Stephen; Nojiri, Yukihiro; Steinhoff, Tobias; Sweeney, Colm; Schuster, Ute; Takahashi, Taro; Tilbrook, Bronte; Wada, Chisato; Wanninkhof, Rik; Alin, Simone R.; Balestrini, Carlos F.; Barbero, Leticia; Bates, Nicholas; Bianchi, Alejandro A.; Bonou, Frédéric; Boutin, Jacqueline; Bozec, Yann; Burger, Eugene F.; Cai, Wei-Jun; Castle, Robert D.; Chen, Liqi; Chierici, Melissa; Currie, Kim; Evans, Wiley; Featherstone, Charles; Feely, Richard; Fransson, Agneta; Goyet, Catherine; Greenwood, Naomi; Gregor, Luke; Hankin, Steven C.; Hardman-Mountford, Nick J.; Harlay, Jérôme; Hauck, Judith; Hoppema, Mario; Humphreys, Matthew P.; Hunt, Christopher W.; Huss, Betty; Ibánhez, J. Severino P.; Johannessen, Truls; Keeling, Ralph F.; Kitidis, Vassilis; Körtzinger, Arne; Kozyr, Alex; Krasakopoulou, Evangelia; Kuwata, Akira; Landschützer, Peter; Lauvset, Siv K.; Lefèvre, Nathalie; Lo Monaco, Claire; Manke, Ansley; Mathis, Jeremy T.; Merlivat, Liliane; Millero, Frank J.; Monteiro, Pedro M. S.; Munro, David R.; Murata, Akihiko; Newberger, Timothy; Omar, Abdirahman M.; Ono, Tsuneo; Paterson, Kristina; Pearce, David; Pierrot, Denis; Robbins, Lisa L.; Saito, Shu; Salisbury, Joe; Schlitzer, Reiner; Schneider, Bernd; Schweitzer, Roland; Sieger, Rainer; Skjelvan, Ingunn; Sullivan, Kevin F.; Sutherland, Stewart C.; Sutton, Adrienne J.; Tadokoro, Kazuaki; Telszewski, Maciej; Tuma, Matthias; van Heuven, Steven M. A. C.; Vandemark, Douglas; Ward, Brian; Watson, Andrew J.; Xu, Suqing

    2016-01-01

    The Surface Ocean CO2 Atlas (SOCAT) is a synthesis of quality-controlled f CO2 (fugacity of carbon dioxide) values for the global surface oceans and coastal seas with regular updates. Version 3 of SOCAT has 14.7 million f CO2 values from 3646 data sets covering the years 1957 to 2014. This latest version has an additional 4.6 million f CO2 values relative to version 2 and extends the record from 2011 to 2014. Version 3 also significantly increases the data availability for 2005 to 2013. SOCAT has an average of approximately 1.2 million surface water f CO2 values per year for the years 2006 to 2012. Quality and documentation of the data has improved. A new feature is the data set quality control (QC) flag of E for data from alternative sensors and platforms. The accuracy of surface water f CO2 has been defined for all data set QC flags. Automated range checking has been carried out for all data sets during their upload into SOCAT. The upgrade of the interactive Data Set Viewer (previously known as the Cruise Data Viewer) allows better interrogation of the SOCAT data collection and rapid creation of high-quality figures for scientific presentations. Automated data upload has been launched for version 4 and will enable more frequent SOCAT releases in the future. High-profile scientific applications of SOCAT include quantification of the ocean sink for atmospheric carbon dioxide and its long-term variation, detection of ocean acidification, as well as evaluation of coupled-climate and ocean-only biogeochemical models. Users of SOCAT data products are urged to acknowledge the contribution of data providers, as stated in the SOCAT Fair Data Use Statement. This ESSD (Earth System Science Data) “living data” publication documents the methods and data sets used for the assembly of this new version of the SOCAT data collection and compares these with those used for earlier versions of the data collection (Pfeil et al., 2013; Sabine et al., 2013; Bakker et al., 2014). 

  12. 42 CFR 35.13 - Entry for negotiation of release or settlement.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Entry for negotiation of release or settlement. 35.13 Section 35.13 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICAL CARE AND EXAMINATIONS HOSPITAL AND STATION MANAGEMENT General § 35.13 Entry for negotiation of release...

  13. Pressure releasing device for reactor container

    International Nuclear Information System (INIS)

    Takeda, Mika.

    1994-01-01

    In the present invention, dose rate to public caused by radioactive rare gases can be decreased. That is, a reactor container contains a reactor pressure vessel incorporating a reactor core. There are disposed a pressure releasing system for releasing the pressure in the reactor pressure vessel to the outside, and a burning device for burning gases released from the pressure releasing system. An exhaustion pipe is disposed to the pressure releasing system. A burning device is disposed to the exhaustion pipe. It is effective to dispose a ventilation port at a portion of the exhaustion pipe upstream of the burning device. In addition, the burning device may preferably be disposed in a multi-stage in the axial direction of the exhaustion pipe. With such procedures, hydrogen in gases discharged along with the release of the pressure in the container is burned. Buoyancy is caused to the exhaustion gases by heat energy upon burning. Since the exhaustion gases can reach a higher level by the buoyancy, the dose rate due to the rare gases can be reduced. (I.S.)

  14. Atmospheric dispersion models of radioactivity releases

    International Nuclear Information System (INIS)

    Oza, R.B.

    2016-01-01

    In view of the rapid industrialization in recent time, atmospheric dispersion models have become indispensible 'tools' to ensure that the effects of releases are well within the acceptable limits set by the regulatory authority. In the case of radioactive releases from the nuclear facility, though negligible in quantity and many a times not even measurable, it is required to demonstrate the compliance of these releases to the regulatory limits set by the regulatory authority by carrying out radiological impact assessment. During routine operations of nuclear facility, the releases are so low that environmental impact is usually assessed with the help of atmospheric dispersion models as it is difficult to distinguish negligible contribution of nuclear facility to relatively high natural background radiation. The accidental releases from nuclear facility, though with negligible probability of occurrence, cannot be ruled out. In such cases, the atmospheric dispersion models are of great help to emergency planners for deciding the intervention actions to minimize the consequences in public domain and also to workout strategies for the management of situation. In case of accidental conditions, the atmospheric dispersion models are also utilized for the estimation of probable quantities of radionuclides which might have got released to the atmosphere. Thus, atmospheric dispersion models are an essential tool for nuclear facility during routine operation as well as in the case of accidental conditions

  15. Summary of Information and Resources Related to Energy Use in Healthcare Facilities - Version 1

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Brett C.; Coughlin, Jennifer L.; Mathew, Paul A.

    2009-09-08

    This document presents the results of a review of publicly available information on energy use in health care facilities. The information contained in this document and in the sources cited herein provides the background and context for efforts to reduce energy use and costs in health care. Recognizing the breadth and diversity of relevant information, the author acknowledges that the report is likely not comprehensive. It is intended only to present a broad picture of what is currently known about health care energy use. This review was conducted as part of a 'High Performance Health Care Buildings' research study funded by the California Energy Commission. The study was motivated by the recognition that health care facilities collectively account for a substantial fraction of total commercial building energy use, due in large part to the very high energy intensity of hospitals and other inpatient care facilities. The goal of the study was to develop a roadmap of research, development and deployment (RD&D) needs for the health care industry. In addition to this information review, the road map development process included interviews with industry experts and a full-day workshop at LBNL in March 2009. This report is described as 'Version 1' with the intent that it will be expanded and updated as part of an ongoing LBNL program in healthcare energy efficiency. The document is being released in this form with the hope that it can assist others in finding and accessing the resources described within.

  16. RAVEN Beta Release

    International Nuclear Information System (INIS)

    Rabiti, Cristian; Alfonsi, Andrea; Cogliati, Joshua Joseph; Mandelli, Diego; Kinoshita, Robert Arthur; Wang, Congjian; Maljovec, Daniel Patrick; Talbot, Paul William

    2016-01-01

    This documents the release of the Risk Analysis Virtual Environment (RAVEN) code. A description of the RAVEN code is provided, and discussion of the release process for the M2LW-16IN0704045 milestone. The RAVEN code is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. RAVEN is capable of investigating the system response as well as the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused toward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. RAVEN has now increased in maturity enough for the Beta 1.0 release.

  17. RAVEN Beta Release

    Energy Technology Data Exchange (ETDEWEB)

    Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alfonsi, Andrea [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cogliati, Joshua Joseph [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kinoshita, Robert Arthur [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wang, Congjian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Maljovec, Daniel Patrick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Talbot, Paul William [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-02-01

    This documents the release of the Risk Analysis Virtual Environment (RAVEN) code. A description of the RAVEN code is provided, and discussion of the release process for the M2LW-16IN0704045 milestone. The RAVEN code is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. RAVEN is capable of investigating the system response as well as the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused toward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. RAVEN has now increased in maturity enough for the Beta 1.0 release.

  18. Publications | Page 631 | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Results 6301 - 6310 of 6389 ... ... and offer free training materials to guide researchers and institutions. ... Use this search tool to locate a specific publication for your field of research. ... Taxonomy of plants : simplified version (restricted access) ...

  19. Atmospheric Release Advisory Capability (ARAC)

    International Nuclear Information System (INIS)

    Dickerson, M.H.

    1975-01-01

    The chief purpose of ARAC data acquisition program is to provide site officials, who are responsible for ensuring maximum health protection for the endangered site personnel and public, with estimates of the effects of atmospheric releases of hazardous material as rapidly and accurately as possible. ARAC is in the initial stages of being implemented and is therefore susceptible to changes before it reaches its final form. However the concept of ARAC is fully developed and was successfully demonstrated during a feasibility study conducted in June 1974, as a joint effort between the Savannah River Laboratory (SRL) and Lawrence Livermore Laboratory (LLL). Additional tests between SRL and LLL are scheduled for December 1975. While the immediate goal is the application of ARAC to assist a limited number of ERDA sites, the system is designed with sufficient flexibility to permit expanding the service to a large number of sites. Success in ARAC application should provide nuclear facilities with a means to handle better the urgent questions concerning the potential accidental hazards from atmospheric releases in addition to providing the sites with a capability to assess the effort of their normal operations

  20. Fuel model studies. Comparison of our present version of GAPCON-THERMAL-2 with results from the EPRI code comparison study. Partial report

    International Nuclear Information System (INIS)

    Malen, K.; Jansson, L.

    1978-08-01

    Runs with our present version of GAPCON-THERMAL-2 have been compared to results from the EPRI code comparison study. Usually also our version of GAPCON predicts high temperatures, 100-300 K or 10-15% higher than average code predictions and experimental results. The well-known temperaturegas release instablility is found also with GAPCON. In this case one identifies the gas release limits 1400 deg C and 1700 deg C as instablility points. (author)

  1. Version 1 of the Hubble Source Catalog

    Science.gov (United States)

    Whitmore, Bradley C.; Allam, Sahar S.; Budavári, Tamás; Casertano, Stefano; Downes, Ronald A.; Donaldson, Thomas; Fall, S. Michael; Lubow, Stephen H.; Quick, Lee; Strolger, Louis-Gregory; Wallace, Geoff; White, Richard L.

    2016-06-01

    The Hubble Source Catalog is designed to help optimize science from the Hubble Space Telescope (HST) by combining the tens of thousands of visit-based source lists in the Hubble Legacy Archive (HLA) into a single master catalog. Version 1 of the Hubble Source Catalog includes WFPC2, ACS/WFC, WFC3/UVIS, and WFC3/IR photometric data generated using SExtractor software to produce the individual source lists. The catalog includes roughly 80 million detections of 30 million objects involving 112 different detector/filter combinations, and about 160,000 HST exposures. Source lists from Data Release 8 of the HLA are matched using an algorithm developed by Budavári & Lubow. The mean photometric accuracy for the catalog as a whole is better than 0.10 mag, with relative accuracy as good as 0.02 mag in certain circumstances (e.g., bright isolated stars). The relative astrometric residuals are typically within 10 mas, with a value for the mode (I.e., most common value) of 2.3 mas. The absolute astrometric accuracy is better than 0''\\hspace{-0.5em}. 1 for most sources, but can be much larger for a fraction of fields that could not be matched to the PanSTARRS, SDSS, or 2MASS reference systems. In this paper we describe the database design with emphasis on those aspects that enable the users to fully exploit the catalog while avoiding common misunderstandings and potential pitfalls. We provide usage examples to illustrate some of the science capabilities and data quality characteristics, and briefly discuss plans for future improvements to the Hubble Source Catalog.

  2. Versions in the lifecycle of academic papers user requirements and guidelins fo digital repositories

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    An academic research paper evolves through various stages during its lifecycle, for example from early conference presentation through working paper to final published refereed journal article. Different versions can co-exist in publicly available electronic form. Finding out researchers’ attitudes towards storing, labelling and making accessible these different versions, both of their own and of their peers’ work is at the heart of the VERSIONS Project, funded by the JISC under the Digital Repositories Programme. The project addresses the issues and uncertainties relating to versions of academic papers in digital repositories. By including a user requirements study, the project will clarify the needs of researchers and other stakeholders for deposit, storage and accessibility of different versions in the lifecycle of a digital resource. In addition to looking at user needs, the project will analyse researchers’ current practice in terms of retention of author copies of their own material. This investig...

  3. XTALOPT version r11: An open-source evolutionary algorithm for crystal structure prediction

    Science.gov (United States)

    Avery, Patrick; Falls, Zackary; Zurek, Eva

    2018-01-01

    Version 11 of XTALOPT, an evolutionary algorithm for crystal structure prediction, has now been made available for download from the CPC library or the XTALOPT website, http://xtalopt.github.io. Whereas the previous versions of XTALOPT were published under the Gnu Public License (GPL), the current version is made available under the 3-Clause BSD License, which is an open source license that is recognized by the Open Source Initiative. Importantly, the new version can be executed via a command line interface (i.e., it does not require the use of a Graphical User Interface). Moreover, the new version is written as a stand-alone program, rather than an extension to AVOGADRO.

  4. Effective recruitment of participants to a phase I study using the internet and publicity releases through charities and patient organisations: analysis of the adaptive study of IL-2 dose on regulatory T cells in type 1 diabetes (DILT1D).

    Science.gov (United States)

    Heywood, James; Evangelou, Marina; Goymer, Donna; Kennet, Jane; Anselmiova, Katerina; Guy, Catherine; O'Brien, Criona; Nutland, Sarah; Brown, Judy; Walker, Neil M; Todd, John A; Waldron-Lynch, Frank

    2015-03-11

    A barrier to the successful development of new disease treatments is the timely recruitment of participants to experimental medicine studies that are primarily designed to investigate biological mechanisms rather than evaluate clinical efficacy. The aim of this study was to analyse the performance of three recruitment sources and the effect of publicity events during the Adaptive study of IL-2 dose on regulatory T cells in type 1 diabetes (DILT1D). The final study outcome, demography, disease duration, residence and the effect of publicity events on the performance of three recruitment sources (clinics, type 1 diabetes (T1D) disease register and the internet) were analysed from a bespoke DILT1D recruitment database. For the internet source, the origin of website hits in relation to publicity events was also evaluated. A total of 735 potentially eligible participants were approached to identify the final 45 DILT1D participants. A total of 477 (64%) were identified via the disease register, but only 59 (12%) responded to contact. A total of 317 individuals registered with the DILT1D study team. Self-referral via the study website generated 170 (54%) registered individuals and was the most popular and successful source, with 88 (28%) sourced from diabetes clinics and 59 (19%) from the disease register. Of those with known T1D duration (N = 272), the internet and clinics sources identified a larger number (57, 21%) of newly diagnosed T1D (promotional events from organisations supporting T1D research and treatment during the trial were essential to the success of the internet recruitment strategy. Analysis of the DILT1D study recruitment outcomes illustrates the utility of an active internet recruitment strategy, supported by patient groups and charities, funding agencies and sponsors, in successfully conducting an early phase study in T1D. This recruitment strategy should now be evaluated in late-stage trials to develop treatments for T1D and other diseases. NCT

  5. Model-based version management system framework

    International Nuclear Information System (INIS)

    Mehmood, W.

    2016-01-01

    In this paper we present a model-based version management system. Version Management System (VMS) a branch of software configuration management (SCM) aims to provide a controlling mechanism for evolution of software artifacts created during software development process. Controlling the evolution requires many activities to perform, such as, construction and creation of versions, identification of differences between versions, conflict detection and merging. Traditional VMS systems are file-based and consider software systems as a set of text files. File based VMS systems are not adequate for performing software configuration management activities such as, version control on software artifacts produced in earlier phases of the software life cycle. New challenges of model differencing, merge, and evolution control arise while using models as central artifact. The goal of this work is to present a generic framework model-based VMS which can be used to overcome the problem of tradition file-based VMS systems and provide model versioning services. (author)

  6. Hydraulic release oil tool

    International Nuclear Information System (INIS)

    Mims, M.G.; Mueller, M.D.; Ehlinger, J.C.

    1992-01-01

    This patent describes a hydraulic release tool. It comprises a setting assembly; a coupling member for coupling to drill string or petroleum production components, the coupling member being a plurality of sockets for receiving the dogs in the extended position and attaching the coupling member the setting assembly; whereby the setting assembly couples to the coupling member by engagement of the dogs in the sockets of releases from and disengages the coupling member in movement of the piston from its setting to its reposition in response to a pressure in the body in exceeding the predetermined pressure; and a relief port from outside the body into its bore and means to prevent communication between the relief port and the bore of the body axially of the piston when the piston is in the setting position and to establish such communication upon movement of the piston from the setting position to the release position and reduce the pressure in the body bore axially of the piston, whereby the reduction of the pressure signals that the tool has released the coupling member

  7. APASS Data Release 10

    Science.gov (United States)

    Henden, Arne A.; Levine, Stephen; Terrell, Dirk; Welch, Douglas L.; Munari, Ulisse; Kloppenborg, Brian K.

    2018-06-01

    The AAVSO Photometric All-Sky Survey (APASS) has been underway since 2010. This survey covers the entire sky from 7.5 knowledge of the optical train distortions. With these changes, DR10 includes many more stars than prior releases. We describe the survey, its remaining limitations, and prospects for the future, including a very-bright-star extension.

  8. Release the Prisoners Game

    Science.gov (United States)

    Van Hecke, Tanja

    2011-01-01

    This article presents the mathematical approach of the optimal strategy to win the "Release the prisoners" game and the integration of this analysis in a math class. Outline lesson plans at three different levels are given, where simulations are suggested as well as theoretical findings about the probability distribution function and its mean…

  9. Principles for limiting releases of radioactive effluents into the environment

    International Nuclear Information System (INIS)

    1986-01-01

    This publication is concerned with the subject of limiting releases of radioactive effluents during normal, controlled operation of nuclear installations. It does not deal with releases from accidents where it is only possible to limit exposures by intervention. In 1978 the IAEA published guidance on the concepts and principles for use by the competent authorities in setting limits for planned releases of radioactive material into the environment (Safety Series No. 45). This publication is a complete revision of Safety Series No. 45 and its Annex

  10. Protecting Astronaut Medical Privacy: Review of Presentations and Publications for Attributability

    Science.gov (United States)

    Wear, M. L.; Charvat, J. M.; Lee, L. R.; Babiak-Vazquez, A.; Mason, S. S.; Van Baalen, M.

    2018-01-01

    Retrospective research and medical data collected on astronauts can be a valuable resource for researchers. This data can be requested from two separate NASA Archives. The Lifetime Surveillance of Astronaut Health (LSAH) holds astronaut medical data, and the Life Sciences Data Archive (LSDA) holds research data. One condition of use of astronaut research and medical data is the requirement that all abstracts, publications and presentations using this data must be reviewed for attributability. All final versions of abstracts, presentations, posters, and manuscripts must be reviewed by LSDA/LSAH prior to submission to a conference, journal, or other entities outside the Principal Investigator (PI) laboratory [including the NASA Export Control Document Availability Authorization (DAA) system]. If material undergoes multiple revisions (e.g., journal editor comments), the new versions must also be reviewed by LSDA/LSAH prior to re-submission to the journal. The purpose of this review is to ensure that no personally identifiable information (PII) is included in materials that are presented in a public venue or posted to the public domain. The procedures for submitting materials for review will be outlined. The process that LSAH/LSDA follows for assessing attributability will be presented. Characteristics and parameter combinations that often prompt attributability concerns will be identified. A published case report for a National Football League (NFL) player will be used to demonstrate how, in a population of public interest, a combination of information can result in inadvertent release of private or sensitive information.

  11. Environmental releases for calendar year 1994

    International Nuclear Information System (INIS)

    Gleckler, B.P.

    1995-07-01

    This report fulfills the annual environmental release reporting requirements of US Department of Energy (DOE) Orders. This report provides supplemental information to the Hanford Site Environmental Report. The Hanford Site Environmental Report provides an update on the environmental status of the entire Hanford Site. The sitewide annual report summarizes the degree of compliance of the Hanford Site with applicable environmental regulations and informs the public about the impact of Hanford operations on the surrounding environment. Like the Hanford Site Environmental Report, this annual report presents a summary of the environmental releases from facilities managed by the Westinghouse Hanford Company (WHC) and monitored by Bechtel Hanford, Incorporated (BHI). In addition to the summary data, this report also includes detailed data on air emissions, liquid effluents, and hazardous substances released to the environment during calendar year 1994 from these facilities

  12. Radioactive releases into the environment under accidental conditions

    International Nuclear Information System (INIS)

    Beninson, D.

    1976-01-01

    Although accidents involving the release of radioactive materials and the unplanned exposure of people can occur at any stage of the nuclear fuel cycle, most attention has been focused on reactor accidents. Although no power reactor accidents involving exposure of the public have yet occured, it should be recognized that the probability of such accidental releases cannot be reduced to zero. Since the inventory of radioactive materials in power reactors is very large, it is usual to postulate, for safety assessments, that a release of fission products takes place in spite of all protective measures. This postulated release is of importance for reactor siting and for preparing emergency plans. (HP) [de

  13. Release strategies for rehabilitated sea otters

    Science.gov (United States)

    DeGange, Anthony R.; Ballachey, Brenda E.; Bayha, Keith; Williams, Terrie M.; Davis, Randall W.

    1995-01-01

    According to the U.S. Fish and Wildlife Services’ (USFWS) Response Plan for sea otters (USFWS, in preparation), in the event of an oil spill, the decision to release sea otters from rehabilitation centers following treatment will be linked to the decision on whether to capture sea otters for treatment. Assuming a scenario similar to the Exxon Valdez oil spill (EVOS), once the decision to capture sea otters is made, the ultimate goal is to return as many sea otters to the wild as possible, even though the rescue may not be expected to produce results significant at the population level. The decision by the USFWS to proceed with capture, rehabilitation, and release will be made on a case-by-case basis (USFWS, in preparation). Many factors will influence the decision. Perhaps the most important factors in deciding when and where to release sea otters are the location and availability of suitable release sites and verification that the otters are free of diseases that might be transmitted to the wild population.Alternative release strategies for sea otters will be contained in the sea otter response portion of the USFWS’s oil spill contingency plans for Alaska and California that are being developed as required by the Oil Pollution Act of 1990. Public review of these plans before they are implemented will help to reduce public concern about the survival of rehabilitated otters, their biological effect on the release area, and the potential introduction or spread of disease into the wild sea otter population.The objective of this chapter is to review alternative strategies for the disposition of rehabilitated sea otters. Our assumption is that returning as many animals to the wild as possible, whether it be for humanitarian or biological reasons, is the ultimate goal of this effort (Figure 10.1).

  14. Site release in the decommissioning of nuclear installations

    International Nuclear Information System (INIS)

    Revilla, Jose Luis; Sanz, Maria Teresa; Marugan, Inmaculada; Simon, Inmaculada; Martin, Manuel; Solis, Susana; Sterling, Agustina

    2008-01-01

    Spanish regulatory framework for the decommissioning process of a nuclear facility ends up with a decommission statement, which releases the licence-holder of the facility from its responsibilities as an operator. It also establishes -where a restricted site release applies- the appropriate future use restrictions, and the responsible of both maintaining such restrictions and ensuring their compliance. Releasing a site implies eliminating all radiological monitoring. The Regulations, however, did not specify either the radiological conditions to be met for the site to be released, or the possibility of a partial release -with or without restrictions-. In case of restricted site release, the Regulations did not specify either the required criteria for such a release. This paper presents the main features of the Safety Instruction IS-13 'Radiological criteria for the release of nuclear facilities sites' issued recently by the Spanish Nuclear Safety Council as a new specific regulation. This Safety Instruction establishes the requirements and conditions for the release of nuclear facility sites, that is, radiological criteria on the effective dose to the public, partial release of nuclear facility sites and restricted release of nuclear facility sites. (author).

  15. Prime mission results of the dual-frequency precipitation radar on the global precipitation measurement core spacecraft and the version 5 GPM standard products

    Science.gov (United States)

    Furukawa, K.; Nio, T.; Oki, R.; Kubota, T.; Iguchi, T.

    2017-09-01

    The Dual-frequency Precipitation Radar (DPR) on the Global Precipitation Measurement (GPM) core satellite was developed by Japan Aerospace Exploration Agency (JAXA) and National Institute of Information and Communications Technology (NICT). The objective of the GPM mission is to observe global precipitation more frequently and accurately. The GPM core satellite is a joint product of National Aeronautics and Space Administration (NASA), JAXA and NICT. NASA developed the satellite bus and the GPM Microwave Imager (GMI), and JAXA and NICT developed the DPR. The inclination of the GPM core satellite is 65 degrees, and the nominal flight altitude is 407 km. The non-sunsynchronous circular orbit is necessary for measuring the diurnal change of rainfall. The DPR consists of two radars, which are Ku-band precipitation radar (KuPR) and Ka-band precipitation radar (KaPR). GPM core observatory was successfully launched by H2A launch vehicle on Feb. 28, 2014. DPR orbital check out was completed in May 2014. DPR products were released to the public on Sep. 2, 2014 and Normal Observation Operation period was started. JAXA is continuing DPR trend monitoring, calibration and validation operations to confirm that DPR keeps its function and performance on orbit. The results of DPR trend monitoring, calibration and validation show that DPR kept its function and performance on orbit during the 3 years and 2 months prime mission period. The DPR Prime mission period was completed in May 2017. The version 5 GPM products were released to the public in 2017. JAXA confirmed that GPM/DPR total system performance and the GPM version 5 products achieved the success criteria and the performance indicators that were defined for the JAXA GPM/DPR mission.

  16. StreamStats, version 4

    Science.gov (United States)

    Ries, Kernell G.; Newson, Jeremy K.; Smith, Martyn J.; Guthrie, John D.; Steeves, Peter A.; Haluska, Tana L.; Kolb, Katharine R.; Thompson, Ryan F.; Santoro, Richard D.; Vraga, Hans W.

    2017-10-30

    IntroductionStreamStats version 4, available at https://streamstats.usgs.gov, is a map-based web application that provides an assortment of analytical tools that are useful for water-resources planning and management, and engineering purposes. Developed by the U.S. Geological Survey (USGS), the primary purpose of StreamStats is to provide estimates of streamflow statistics for user-selected ungaged sites on streams and for USGS streamgages, which are locations where streamflow data are collected.Streamflow statistics, such as the 1-percent flood, the mean flow, and the 7-day 10-year low flow, are used by engineers, land managers, biologists, and many others to help guide decisions in their everyday work. For example, estimates of the 1-percent flood (which is exceeded, on average, once in 100 years and has a 1-percent chance of exceedance in any year) are used to create flood-plain maps that form the basis for setting insurance rates and land-use zoning. This and other streamflow statistics also are used for dam, bridge, and culvert design; water-supply planning and management; permitting of water withdrawals and wastewater and industrial discharges; hydropower facility design and regulation; and setting of minimum allowed streamflows to protect freshwater ecosystems. Streamflow statistics can be computed from available data at USGS streamgages depending on the type of data collected at the stations. Most often, however, streamflow statistics are needed at ungaged sites, where no streamflow data are available to determine the statistics.

  17. APGEN Version 5.0

    Science.gov (United States)

    Maldague, Pierre; Page, Dennis; Chase, Adam

    2005-01-01

    Activity Plan Generator (APGEN), now at version 5.0, is a computer program that assists in generating an integrated plan of activities for a spacecraft mission that does not oversubscribe spacecraft and ground resources. APGEN generates an interactive display, through which the user can easily create or modify the plan. The display summarizes the plan by means of a time line, whereon each activity is represented by a bar stretched between its beginning and ending times. Activities can be added, deleted, and modified via simple mouse and keyboard actions. The use of resources can be viewed on resource graphs. Resource and activity constraints can be checked. Types of activities, resources, and constraints are defined by simple text files, which the user can modify. In one of two modes of operation, APGEN acts as a planning expert assistant, displaying the plan and identifying problems in the plan. The user is in charge of creating and modifying the plan. In the other mode, APGEN automatically creates a plan that does not oversubscribe resources. The user can then manually modify the plan. APGEN is designed to interact with other software that generates sequences of timed commands for implementing details of planned activities.

  18. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION WITH CLIPSITS)

    Science.gov (United States)

    Riley, , .

    1994-01-01

    version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

  19. NOAA Climate Data Record (CDR) of Ocean Near Surface Atmospheric Properties, Version 1 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  20. NOAA Climate Data Record (CDR) of Ocean Heat Fluxes, Version 1.0 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  1. Global Historical Climatology Network - Daily (GHCN-Daily), Version 2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  2. NOAA Climate Data Record (CDR) of Sea Surface Temperature - WHOI, Version 1.0 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  3. VizieR Online Data Catalog: GOODS-MUSIC catalog updated version (Santini+, 2009)

    Science.gov (United States)

    Santini, P.; Fontana, A.; Grazian, A.; Salimbeni, S.; Fiore, F.; Fontanot, F.; Boutsia, K.; Castelllano, M.; Cristiani, S.; de Santis, C.; Gallozzi, S.; Giallongo, E.; Nonino, M.; Menci, N.; Paris, D.; Pentericci, L.; Vanzella, E.

    2009-06-01

    The GOODS-MUSIC multiwavelength catalog provides photometric and spectroscopic information for galaxies in the GOODS Southern field. It includes two U images obtained with the ESO 2.2m telescope and one U band image from VLT-VIMOS, the ACS-HST images in four optical (B,V,i,z) bands, the VLT-ISAAC J, H, and Ks bands as well as the Spitzer images at 3.6, 4.5, 5.8, and 8 micron (IRAC) and 24 micron (MIPS). Most of these images have been made publicly available in the coadded version by the GOODS team, while the U band data were retrieved in raw format and reduced by our team. We also collected all the available spectroscopic information from public spectroscopic surveys and cross-correlated the spectroscopic redshifts with our photometric catalog. For the unobserved fraction of the objects, we applied our photometric redshift code to obtain well-calibrated photometric redshifts. The final catalog is made up of 15208 objects, with 209 known stars and 61 AGNs. The major new feature of this updated release is the inclusion of 24 micron photometry. Further improvements concern a revised photometry in the four IRAC bands (mainly based on the use of new PSF-matching kernerls and on a revised procedure for estimating the background), the enlargement of the sample of galaxies with spectroscopic redshifts, the addition of objects selected on the IRAC 4.5 micron image and a more careful selection of AGN sources. (1 data file).

  4. Offsite doses from SRP radioactive releases - 1985

    International Nuclear Information System (INIS)

    Marter, W.L.

    1986-01-01

    This memorandum summarizes the offsite doses from releases of radioactive materials to the environment from SRP operations in 1985. These doses were calculated for inclusion in the environmental report for 1985 to be issued by the Health Protection Department (DPSPU-86-30-1). The environmental report is prepared annually for distribution to state environmental agencies, the news media, and interested members of the public. More detailed data on offsite exposures by radionuclide and exposure pathway will be included in the environmental report

  5. Decontamination for free release

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, K A; Elder, G R [Bradtec Ltd., Bristol (United Kingdom)

    1997-02-01

    Many countries are seeking to treat radioactive waste in ways which meet the local regulatory requirements, but yet are cost effective when all contributing factors are assessed. In some countries there are increasing amounts of waste, arising from nuclear plant decommissioning, which are categorized as low level waste: however with suitable treatment a large part of such wastes might become beyond regulatory control and be able to be released as non-radioactive. The benefits and disadvantages of additional treatment before disposal need to be considered. Several processes falling within the overall description of decontamination for free release have been developed and applied, and these are outlined. In one instance the process seeks to take advantage of techniques and equipment used for decontaminating water reactor circuits intermittently through reactor life. (author). 9 refs, 1 fig., 3 tabs.

  6. Atmospheric Release Advisory Capability

    International Nuclear Information System (INIS)

    Dickerson, M.H.; Gudiksen, P.H.; Sullivan, T.J.

    1983-02-01

    The Atmospheric Release Advisory Capability (ARAC) project is a Department of Energy (DOE) sponsored real-time emergency response service available for use by both federal and state agencies in case of a potential or actual atmospheric release of nuclear material. The project, initiated in 1972, is currently evolving from the research and development phase to full operation. Plans are underway to expand the existing capability to continuous operation by 1984 and to establish a National ARAC Center (NARAC) by 1988. This report describes the ARAC system, its utilization during the past two years, and plans for its expansion during the next five to six years. An integral part of this expansion is due to a very important and crucial effort sponsored by the Defense Nuclear Agency to extend the ARAC service to approximately 45 Department of Defense (DOD) sites throughout the continental US over the next three years

  7. Border cell release

    DEFF Research Database (Denmark)

    Mravec, Jozef

    2017-01-01

    Plant border cells are specialised cells derived from the root cap with roles in the biomechanics of root growth and in forming a barrier against pathogens. The mechanism of highly localised cell separation which is essential for their release to the environment is little understood. Here I present...... in situ analysis of Brachypodium distachyon, a model organism for grasses which possess type II primary cell walls poor in pectin content. Results suggest similarity in spatial dynamics of pectic homogalacturonan during dicot and monocot border cell release. Integration of observations from different...... species leads to the hypothesis that this process most likely does not involve degradation of cell wall material but rather employs unique cell wall structural and compositional means enabling both the rigidity of the root cap as well as detachability of given cells on its surface....

  8. Energy released in fission

    International Nuclear Information System (INIS)

    James, M.F.

    1969-05-01

    The effective energy released in and following the fission of U-235, Pu-239 and Pu-241 by thermal neutrons, and of U-238 by fission spectrum neutrons, is discussed. The recommended values are: U-235 ... 192.9 ± 0.5 MeV/fission; U-238 ... 193.9 ± 0.8 MeV/fission; Pu-239 ... 198.5 ± 0.8 MeV/fission; Pu-241 ... 200.3 ± 0.8 MeV/fission. These values include all contributions except from antineutrinos and very long-lived fission products. The detailed contributions are discussed, and inconsistencies in the experimental data are pointed out. In Appendix A, the contribution to the total useful energy release in a reactor from reactions other than fission are discussed briefly, and in Appendix B there is a discussion of the variations in effective energy from fission with incident neutron energy. (author)

  9. Public Relations in Special Libraries.

    Science.gov (United States)

    Rutkowski, Hollace Ann; And Others

    1991-01-01

    This theme issue includes 11 articles on public relations (PR) in special libraries. Highlights include PR at the Special Libraries Association (SLA); sources for marketing research for libraries; developing a library image; sample PR releases; brand strategies for libraries; case studies; publicizing a consortium; and a bibliography of pertinent…

  10. Slow-release fertilizer

    Science.gov (United States)

    Ming, Douglas W.; Golden, D. C.

    1992-10-01

    A synthetic apatite containing agronutrients and a method for making the apatite are disclosed. The apatite comprises crystalline calcium phosphate having agronutrients dispersed in the crystalline structure. The agronutrients can comprise potassium, magnesium, sulfur, iron, manganese, molybdenum, chlorine, boron, copper and zinc in amounts suited for plant growth. The apatite can optionally comprise a carbonate and/or silicon solubility control agent. The agronutrients are released slowly as the apatite dissolves.

  11. EIA new releases

    International Nuclear Information System (INIS)

    1994-12-01

    This report was prepared by the Energy Information Administration. It contains news releases on items of interest to the petroleum, coal, nuclear, electric and alternate fuels industries ranging from economic outlooks to environmental concerns. There is also a listing of reports by industry and an energy education resource listing containing sources for free or low-cost energy-related educational materials for educators and primary and secondary students

  12. Atmospheric release advisory capability

    International Nuclear Information System (INIS)

    Sullivan, T.J.

    1981-01-01

    The ARAC system (Atmospheric Release Advisory Capability) is described. The system is a collection of people, computers, computer models, topographic data and meteorological input data that together permits a calculation of, in a quasi-predictive sense, where effluent from an accident will migrate through the atmosphere, where it will be deposited on the ground, and what instantaneous and integrated dose an exposed individual would receive

  13. Slow-release fertilizer

    Science.gov (United States)

    Ming, Douglas W. (Inventor); Golden, Dadigamuwage C. (Inventor)

    1995-01-01

    A synthetic apatite containing agronutrients and a method for making the apatite are disclosed. The apatite comprises crystalline calcium phosphate having agronutrients dispersed in the crystalline structure. The agronutrients can comprise potassium, magnesium, sulfur, iron, manganese, molybdenum, chlorine, boron, copper and zinc in amounts suited for plant growth. The apatite can optionally comprise a carbonate and/or silicon solubility control agent. The agronutrients are released slowly as the apatite dissolves.

  14. Schema Versioning for Multitemporal Relational Databases.

    Science.gov (United States)

    De Castro, Cristina; Grandi, Fabio; Scalas, Maria Rita

    1997-01-01

    Investigates new design options for extended schema versioning support for multitemporal relational databases. Discusses the improved functionalities they may provide. Outlines options and basic motivations for the new design solutions, as well as techniques for the management of proposed schema versioning solutions, includes algorithms and…

  15. Several versions of forward gas ionization calorimeter

    International Nuclear Information System (INIS)

    Babintsev, V.V.; Kholodenko, A.G.; Rodnov, Yu.V.

    1994-01-01

    The properties of several versions of a gas ionization calorimeter are analyzed by means of the simulation with the GEANT code. The jet energy and coordinate resolutions are evaluated. Some versions of the forward calorimeter meet the ATLAS requirements. 13 refs., 15 figs., 7 tabs

  16. 14 CFR 1213.109 - News releases concerning international activities.

    Science.gov (United States)

    2010-01-01

    ... Headquarters offices of External Relations and Public Affairs. (b) NASA Centers and Headquarters offices will report all visits proposed by representatives of foreign news media to the Public Affairs Officer of the... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false News releases concerning international...

  17. Global Precipitation Climatology Project (GPCP) - Monthly, Version 2.2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2.2 of the dataset has been superseded by a newer version. Users should not use version 2.2 except in rare cases (e.g., when reproducing previous studies...

  18. Moxibustion for Cephalic Version of Breech Presentation.

    Science.gov (United States)

    Schlaeger, Judith M; Stoffel, Cynthia L; Bussell, Jeanie L; Cai, Hui Yan; Takayama, Miho; Yajima, Hiroyoshi; Takakura, Nobuari

    2018-05-01

    Moxibustion, a form of traditional Chinese medicine (TCM), is the burning of the herb moxa (Folium Artemisiae argyi or mugwort) over acupuncture points. It is often used in China to facilitate cephalic version of breech presentation. This article reviews the history, philosophy, therapeutic use, possible mechanisms of action, and literature pertaining to its use for this indication. For moxibustion, moxa can be rolled into stick form, placed directly on the skin, or placed on an acupuncture needle and ignited to warm acupuncture points. Studies have demonstrated that moxibustion may promote cephalic version of breech presentation and may facilitate external cephalic version. However, there is currently a paucity of research on the effects of moxibustion on cephalic version of breech presentation, and thus there is a need for further studies. Areas needing more investigation include efficacy, safety, optimal technique, and best protocol for cephalic version of breech presentation. © 2018 by the American College of Nurse-Midwives.

  19. Public Values

    DEFF Research Database (Denmark)

    Beck Jørgensen, Torben; Rutgers, Mark R.

    2015-01-01

    administration is approached in terms of processes guided or restricted by public values and as public value creating: public management and public policy-making are both concerned with establishing, following and realizing public values. To study public values a broad perspective is needed. The article suggest......This article provides the introduction to a symposium on contemporary public values research. It is argued that the contribution to this symposium represent a Public Values Perspective, distinct from other specific lines of research that also use public value as a core concept. Public...... a research agenda for this encompasing kind of public values research. Finally the contributions to the symposium are introduced....

  20. Protecting privacy in data release

    CERN Document Server

    Livraga, Giovanni

    2015-01-01

    This book presents a comprehensive approach to protecting sensitive information when large data collections are released by their owners. It addresses three key requirements of data privacy: the protection of data explicitly released, the protection of information not explicitly released but potentially vulnerable due to a release of other data, and the enforcement of owner-defined access restrictions to the released data. It is also the first book with a complete examination of how to enforce dynamic read and write access authorizations on released data, applicable to the emerging data outsou

  1. Triggered Release from Polymer Capsules

    Energy Technology Data Exchange (ETDEWEB)

    Esser-Kahn, Aaron P. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry; Odom, Susan A. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry; Sottos, Nancy R. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Materials Science and Engineering; White, Scott R. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Aerospace Engineering; Moore, Jeffrey S. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry

    2011-07-06

    Stimuli-responsive capsules are of interest in drug delivery, fragrance release, food preservation, and self-healing materials. Many methods are used to trigger the release of encapsulated contents. Here we highlight mechanisms for the controlled release of encapsulated cargo that utilize chemical reactions occurring in solid polymeric shell walls. Triggering mechanisms responsible for covalent bond cleavage that result in the release of capsule contents include chemical, biological, light, thermal, magnetic, and electrical stimuli. We present methods for encapsulation and release, triggering methods, and mechanisms and conclude with our opinions on interesting obstacles for chemically induced activation with relevance for controlled release.

  2. Modeling CANDU type fuel behaviour during extended burnup irradiations using a revised version of the ELESIM code

    International Nuclear Information System (INIS)

    Arimescu, V.I.; Richmond, W.R.

    1992-05-01

    The high-burnup database for CANDU fuel, with a variety of cases, offers a good opportunity to check models of fuel behaviour, and to identify areas for improvement. Good agreement of calculated values of fission-gas release, and sheath hoop strain, with experimental data indicates that the global behaviour of the fuel element is adequately simulated by a computer code. Using, the ELESIM computer code, the fission-gas release, swelling, and fuel pellet expansion models were analysed, and changes made for gaseous swelling, and diffusional release of fission-gas atoms to the grain boundaries. Using this revised version of ELESIM, satisfactory agreement between measured values of fission-gas release was found for most of the high-burnup database cases. It is concluded that the revised version of the ELESIM code is able to simulate with reasonable accuracy high-burnup as well as low-burnup CANDU fuel

  3. 41 CFR 102-37.465 - May a SASP modify or release any of the terms and conditions of donation?

    Science.gov (United States)

    2010-07-01

    ... release any of the terms and conditions of donation? 102-37.465 Section 102-37.465 Public Contracts and... REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY Donations to Public Agencies, Service... SASP modify or release any of the terms and conditions of donation? You may alter or grant releases...

  4. Development of environmental dose assessment system (EDAS) code of PC version

    CERN Document Server

    Taki, M; Kobayashi, H; Yamaguchi, T

    2003-01-01

    A computer code (EDAS) was developed to assess the public dose for the safety assessment to get the license of nuclear reactor operation. This code system is used for the safety analysis of public around the nuclear reactor in normal operation and severe accident. This code was revised and composed for personal computer user according to the Nuclear Safety Guidelines reflected the ICRP1990 recommendation. These guidelines are revised by Nuclear Safety Commission on March, 2001, which are 'Weather analysis guideline for the safety assessment of nuclear power reactor', 'Public dose around the facility assessment guideline corresponding to the objective value for nuclear power light water reactor' and 'Public dose assessment guideline for safety review of nuclear power light water reactor'. This code has been already opened for public user by JAERI, and English version code and user manual are also prepared. This English version code is helpful for international cooperation concerning the nuclear safety assessme...

  5. The Dark Energy Survey First Data Release

    Science.gov (United States)

    Carrasco Kind, Matias

    2018-01-01

    In this talk I will announce and highlight the main components of the first public data release (DR1) coming from the Dark Energy Survey (DES).In January 2016, the DES survey made available, in a simple unofficial release to the astronomical community, the first set of products. This data was taken and studied during the DES Science Verification period consisting on roughly 250 sq. degrees and 25 million objects at a mean depth of i=23.7 that led to over 80 publications from DES scientist.The DR1 release is the first official release from the main survey and it consists on the observations taken during the first 3 seasons from August 2013 to February 2016 (about 100 nights each season) of the survey which cover the entire DES footprint. All of the Single Epoch Images and the Year 3 Coadded images distributed in 10223 tiles are available for download in this release. The catalogs provide astrometry, photometry and basic classification for near 400M objects in roughly 5000 sq. degrees on the southern hemisphere with a approximate mean depth of i=23.3. Complementary footprint, masking and depth information is also available. All of the software used during the generation of these products are open sourced and have been made available through the Github DES Organization. Images, data and other sub products have been possible through the international and collaborative effort of all 25 institutions involved in DES and are available for exploration and download through the interfaces provided by a partnership between NCSA, NOAO and LIneA.

  6. Officially released mutant varieties in China

    International Nuclear Information System (INIS)

    Liu, L.; Van Zanten, L.; Shu, Q.Y.; Maluszynski, M.

    2004-01-01

    The use of mutation techniques for crop improvement in China has a long and well-established tradition of more than 50 years. As the result of intensive research in many institutes dealing with application of nuclear technologies more than 620 cultivars of 44 crop species have been released. Numerous mutant varieties have been grown on a large scale bringing significant economic impact, sustaining crop production and greatly contributing to increase of food production also in stress prone areas of the country. However, there is still missing information not only on the number of mutant varieties released in particular crop species but also on mutagens applied, selection approaches and on the use of mutants in cross breeding. Numerous Chinese scientists collected and systematized this information. Results of their work were often published in local scientific journals in the Chinese language and as such were unavailable to breeders from other countries. Having this in mind, we requested Dr. Liu Luxiang, the Director of the Department of Plant Mutation Breeding and Genetics, Institute for Application of Atomic Energy, Chinese Academy of Agricultural Sciences in Beijing to help us in finding as much information as possible on mutant varieties officially released in China. The data has been collected in close collaboration with his colleagues from various institutions all over the country and then evaluated, edited and prepared for publication by our team responsible for the FAO/IAEA Database of Officially Released Mutant Varieties. We would like to thank all Chinese colleagues who contributed to this list of Chinese mutant varieties. We hope that this publication will stimulate plant breeders in China to collect more information on released mutant varieties and especially on the use of mutated genes in cross breeding. (author)

  7. Riola release report

    Energy Technology Data Exchange (ETDEWEB)

    Woodward, E.C.

    1983-08-04

    Eleven hours after execution of the Riola Event (at 0826 PDT on 25 September 1980) in hole U2eq of the Nevada Test Site (NTS), a release of radioactivity began. When the seepage stopped at about noon the following day, up to some 3200 Ci of activity had been dispersed by light variable winds. On 26 September, examination of the geophone records showed six hours of low-level, but fairly continuous, activity before the release. Electrical measurements indicated that most cables were still intact to a depth below the stemming platform. A survey of the ground zero area showed that the seepage came through cracks between the surface conductor and the pad, through cracks in the pad, and through a crack adjacent to the pad around the mousehole (a small hole adjacent to the emplacement hole). To preclude undue radiation exposure or injury from a surprise subsidence, safety measures were instituted. Tritium seepage was suffucient to postpone site activities until a box and pipeline were emplaced to contain and remove the gas. Radiation release modeling and calculations were generally consistent with observations. Plug-hole interaction calculations showed that the alluvium near the bottom of the plug may have been overstressed and that improvements in the design of the plug-medium interface can be made. Experimental studies verified that the surface appearance of the plug core was caused by erosion, but, assuming a normal strength for the plug material, that erosion alone could not account for the disappearance of such a large portion of the stemming platform. Samples from downhole plug experiments show that the plug may have been considerably weaker than had been indicted by quality assurance (QA) samples. 19 references, 32 figures, 10 tables.

  8. Riola release report

    International Nuclear Information System (INIS)

    Woodward, E.C.

    1983-01-01

    Eleven hours after execution of the Riola Event (at 0826 PDT on 25 September 1980) in hole U2eq of the Nevada Test Site (NTS), a release of radioactivity began. When the seepage stopped at about noon the following day, up to some 3200 Ci of activity had been dispersed by light variable winds. On 26 September, examination of the geophone records showed six hours of low-level, but fairly continuous, activity before the release. Electrical measurements indicated that most cables were still intact to a depth below the stemming platform. A survey of the ground zero area showed that the seepage came through cracks between the surface conductor and the pad, through cracks in the pad, and through a crack adjacent to the pad around the mousehole (a small hole adjacent to the emplacement hole). To preclude undue radiation exposure or injury from a surprise subsidence, safety measures were instituted. Tritium seepage was suffucient to postpone site activities until a box and pipeline were emplaced to contain and remove the gas. Radiation release modeling and calculations were generally consistent with observations. Plug-hole interaction calculations showed that the alluvium near the bottom of the plug may have been overstressed and that improvements in the design of the plug-medium interface can be made. Experimental studies verified that the surface appearance of the plug core was caused by erosion, but, assuming a normal strength for the plug material, that erosion alone could not account for the disappearance of such a large portion of the stemming platform. Samples from downhole plug experiments show that the plug may have been considerably weaker than had been indicted by quality assurance (QA) samples. 19 references, 32 figures, 10 tables

  9. Allegheny County Toxics Release Inventory

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Toxics Release Inventory (TRI) data provides information about toxic substances released into the environment or managed through recycling, energy recovery, and...

  10. International safeguards data management system. System description: Version 1.1.; Release PLI 82

    International Nuclear Information System (INIS)

    Argentesi, T.; Casilli, T.; Costantini, L.; Dondi, M.G.; Franklin, M.

    1982-01-01

    This document describes a nuclear material accountancy system which has been developed using the ADABAS data base management system and is implemented on the JRC-Ispra computer. Throughout the report, the data base system is referred to as ''ISADAM'', i.e. International Safeguards Data Management System. The system provides tools for a safeguards authority to decide whether an operators MUF (Material Unaccounted For) can be accounted for as an accumulation of operator measurement errors. The principle objective of the applications programs described here is to provide a variance analysis of MUF in which the variance of MUF is computed as a function of the accounting declarations and the error characteristics of the operator measurement system. A overview of ISADAM is presented; then, a detailed description of the processing applied by the system is given. A description of the parameter information required by the four autonomous programs ISADAM is presented. In developing ISADAM, one of the prime factors taken into consideration was the ease with which it could be used

  11. The generic HASKELL user's guide : version 0.99 - Amber release

    NARCIS (Netherlands)

    Clarke, D.; Hinze, R.; Jeuring, J.T.; Löh, A.; Wit, J. de

    2001-01-01

    Software development often consists of designing datatypes around which functionality is added. Some functionality is datatype specific, whereas other functionality is defined on almost all datatypes in such a way that it depends only on the structure of the datatype. A function that works on

  12. The Generic Haskell user's guide, Version 1.60 - Diamond release

    NARCIS (Netherlands)

    Löh, A.; Jeuring, J.T.; Rodriguez, A.

    2006-01-01

    Software development often consists of designing datatypes around which functionality is added. Some functionality is datatype specific, whereas other functionality is defined on almost all datatypes in a way that depends only on the structure of the datatype. A function that works on many

  13. Appendix I. The commons deeds of the licenses (release 3.0, unported version)

    OpenAIRE

    2014-01-01

    taken from http://creativecommons.org/licenses/by/3.0 taken from http://creativecommons.org/licenses/by-sa/3.0 taken from http://creativecommons.org/licenses/by-nd/3.0 taken from http://creativecommons.org/licenses/by-nc/3.0 taken from http://creativecommons.org/licenses/by-nc-sa/3.0 taken from http://creativecommons.org/licenses/by-nc-nd/3.0

  14. 12 CFR 4.38 - Restrictions on dissemination of released information.

    Science.gov (United States)

    2010-01-01

    ... dissemination of released information. (a) Records. The OCC may condition a decision to release non-public OCC... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Restrictions on dissemination of released information. 4.38 Section 4.38 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY...

  15. Publication of the bulletin

    CERN Multimedia

    2007-01-01

    The final edition (Nos 51-52/2007 and 1-2-3/2008) of the last Bulletin of the year will appear on Friday 14 December and will cover events at CERN from 17 December 2007 to 18 January 2008. Announcements for publication in this issue should reach the Publication Section (Communication group) or the Staff Association, as appropriate, by noon on Tuesday 11 December. The table below lists the 2008 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin publication 2008 Bulletin N° 4-5 Publication: Monday 21 january Submission deadline for announcements: Tuesday 15 January Bulletin N° 6-7 Publication: Monday 4 february Submission deadline for announcements: Tuesday 29 January Bulletin N° 8-9 Publication: Monday 18 february Submission deadline for announcements: Tuesday 12 February Bulletin N° 10-11 P...

  16. Guidelines for Authors Version 2012

    Directory of Open Access Journals (Sweden)

    Perspectiva Geográfica

    2014-01-01

    Full Text Available Perspectiva Geográfica is a magazine specializing in geographic studies and spatial planning, aimed at academic communities, research and territorial development issues interested in geography and related sciences, which publishes original and unpublished scientific and technological research, reflection and revie warticles, referring to the spatiality of social, economic, political, cultural and natural phenomena, from various perspectives and theoretical approaches. This publication also welcomes studies on technical and methodological aspects of the work of geographers and applied geography work in the fields of geomatics and spatial planning and research frontier, which result in the development of geographical science.

  17. UNICOS Evolution: CPC Version 6

    CERN Document Server

    Blanco Vinuela, E; Bradu, B; Durand, Ph; Fernandez Adiego, B; Izquierdo Rosas, S; Merezhin, A; Ortola Vidal, J; Rochez, J; Willeman, D

    2011-01-01

    The UNICOS (UNified Industrial COntrol System) framework was created back in 1998. Since then a noticeable number of applications in different domains have used this framework. Furthermore UNICOS has been formalized and its supervision layer has been reused in other kinds of applications (e.g. monitoring or supervisory tasks) where a control layer is not necessarily UNICOS oriented. The process control package has been reformulated as the UNICOS CPC package (Continuous Process Control) and a reengineering process has been followed. The drive behind these noticeable changes was (1) being able to upgrade to the new more performing IT technologies in the automatic code generation, (2) being flexible enough to create new additional device types to cope with other needs (e.g. Vacuum or Cooling and Ventilation applications) without major impact on the framework or the PLC code baselines and (3) enhance the framework with new functionalities (e.g. recipes). This publication addresses the motivation, changes, new fun...

  18. Test documentation for the GENII Software Version 1.485

    International Nuclear Information System (INIS)

    Rittmann, P.D.

    1994-01-01

    Version 1.485 of the GENII software was released by the PNL GENII custodian in December of 1990. At that time the WHC GENII custodian performed several tests to verify that the advertised revisions were indeed present and that these changes had not introduced errors in the calculations normally done by WHC. These tests were not documented at that time. The purpose of this document is to summarize suitable acceptance tests of GENII and compare them with a few hand calculations. The testing is not as thorough as that used by the PNL GENII Custodian, but is sufficient to establish that the GENII program appears to work correctly on WHC managed personal computers

  19. CBP TOOLBOX VERSION 2.0: CODE INTEGRATION ENHANCEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Smith, F.; Flach, G.; BROWN, K.

    2013-06-01

    This report describes enhancements made to code integration aspects of the Cementitious Barriers Project (CBP) Toolbox as a result of development work performed at the Savannah River National Laboratory (SRNL) in collaboration with Vanderbilt University (VU) in the first half of fiscal year 2013. Code integration refers to the interfacing to standalone CBP partner codes, used to analyze the performance of cementitious materials, with the CBP Software Toolbox. The most significant enhancements are: 1) Improved graphical display of model results. 2) Improved error analysis and reporting. 3) Increase in the default maximum model mesh size from 301 to 501 nodes. 4) The ability to set the LeachXS/Orchestra simulation times through the GoldSim interface. These code interface enhancements have been included in a new release (Version 2.0) of the CBP Toolbox.

  20. [Guidelines on urolithiasis: an outline and effective use of the revised version].

    Science.gov (United States)

    Kohri, Kenjiro; Suzuki, Koji

    2012-12-01

    Progress has been made in the diagnosis and treatment of urolithiasis over the last 10 years, after the first version of the Guidelines on Urolithiasis was published in December 2002. Considering such a situation, the revised version is due for publication soon. At this symposium, 3 persons who were engaged in the revision of the guidelines presented its digest. The revised version is characterized by the adoption of a "Frequently asked questions style", aiming to facilitate its usage as a reference book or dictionary readers can refer to when a question is raised in practice. It may be possible to further promote the medical treatment of urolithiasis by effectively using this in combination with the relatively textbook-like first version.

  1. Features of the latest version of the PHITS code

    International Nuclear Information System (INIS)

    Sato, Tatsuhiko; Matsuda, Norihiro; Hashimoto, Shintaro; Iwamoto, Yosuke; Noda, Shusaku; Ogawa, Tatsuhiko; Nakajima, Hiroshi; Fukahori, Tokio; Okumura, Keisuke; Kai, Tetsuya; Chiba, Satoshi; Niita, Koji; Iwase, Hiroshi; Furuta, Takuya

    2013-01-01

    A Multi-purpose Monte Carlo Particle and Heavy Ion Transport code System, PHITS, developed through collaborations between JAEA and several institutes in Japan and Europe, and upgraded recently and released as PHITS2.52 is presented as an overview. In the new version, higher accuracy of the simulation was achieved by implementing the latest nuclear reaction models such as Liege intra-nuclear cascade version 4.6 (INCL4.6) and a statistical multi-fragmentation model including JAM and JQMD for high-energy regions. The reliability of the simulation code was improved by modifying both the algorithms for the electron-, positron-, and photon-transport simulations in terms of not only the code itself but also the contents of its package, such as the attached data libraries. More than 800 researchers have been registered as PHITS users, and they apply the code to various research and development fields such as nuclear technology, accelerator design, medical physics, and cosmic-ray research. (S. Ohno)

  2. A new version of the event generator Sibyll

    CERN Document Server

    Riehn, Felix; Fedynitch, Anatoli; Gaisser, Thomas K.; Stanev, Todor

    2016-01-01

    The event generator Sibyll can be used for the simulation of hadronic multiparticle production up to the highest cosmic ray energies. It is optimized for providing an economic description of those aspects of the expected hadronic final states that are needed for the calculation of air showers and atmospheric lepton fluxes. New measurements from fixed target and collider experiments, in particular those at LHC, allow us to test the predictive power of the model version 2.1, which was released more than 10 years ago, and also to identify shortcomings. Based on a detailed comparison of the model predictions with the new data we revisit model assumptions and approximations to obtain an improved version of the interaction model. In addition a phenomenological model for the production of charm particles is implemented as needed for the calculation of prompt lepton fluxes in the energy range of the astrophysical neutrinos recently discovered by IceCube. After giving an overview of the new ideas implemented in Sibyll...

  3. 2MASS Catalog Server Kit Version 2.1

    Science.gov (United States)

    Yamauchi, C.

    2013-10-01

    The 2MASS Catalog Server Kit is open source software for use in easily constructing a high performance search server for important astronomical catalogs. This software utilizes the open source RDBMS PostgreSQL, therefore, any users can setup the database on their local computers by following step-by-step installation guide. The kit provides highly optimized stored functions for positional searchs similar to SDSS SkyServer. Together with these, the powerful SQL environment of PostgreSQL will meet various user's demands. We released 2MASS Catalog Server Kit version 2.1 in 2012 May, which supports the latest WISE All-Sky catalog (563,921,584 rows) and 9 major all-sky catalogs. Local databases are often indispensable for observatories with unstable or narrow-band networks or severe use, such as retrieving large numbers of records within a small period of time. This software is the best for such purposes, and increasing supported catalogs and improvements of version 2.1 can cover a wider range of applications including advanced calibration system, scientific studies using complicated SQL queries, etc. Official page: http://www.ir.isas.jaxa.jp/~cyamauch/2masskit/

  4. Integrated Global Radiosonde Archive (IGRA) Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Integrated Global Radiosonde Archive (IGRA) Version 2 consists of quality-controlled radiosonde observations of temperature, humidity, and wind at stations across...

  5. Integrated Procurement Management System, Version II

    Science.gov (United States)

    Collier, L. J.

    1985-01-01

    Integrated Procurement Management System, Version II (IPMS II) is online/ batch system for collecting developing, managing and disseminating procurementrelated data at NASA Johnson Space Center. Portions of IPMS II adaptable to other procurement situations.

  6. TJ-II Library Manual (Version 2)

    International Nuclear Information System (INIS)

    Tribaldos, V.; Milligen, B. Ph. van; Lopez-Fraguas, A.

    2001-01-01

    This is a manual of use of the TJ2 Numerical Library that has been developed for making numerical computations of different TJ-II configurations. This manual is a new version of the earlier manual CIEMAT report 806. (Author)

  7. Cobalt release from inexpensive jewellery

    DEFF Research Database (Denmark)

    Thyssen, Jacob Pontoppidan; Jellesen, Morten Stendahl; Menné, Torkil

    2010-01-01

    . Conclusions: This study showed that only a minority of inexpensive jewellery purchased in Denmark released cobalt when analysed with the cobalt spot test. As fashion trends fluctuate and we found cobalt release from dark appearing jewellery, cobalt release from consumer items should be monitored in the future......Objectives: The aim was to study 354 consumer items using the cobalt spot test. Cobalt release was assessed to obtain a risk estimate of cobalt allergy and dermatitis in consumers who would wear the jewellery. Methods: The cobalt spot test was used to assess cobalt release from all items...

  8. WIMS-IJSO - An extended version of the WIMS group constant library

    International Nuclear Information System (INIS)

    Trkov, A.; Perdan, A.

    1982-11-01

    WIMS-IJSO is a preliminary extended version of the WIMS library as supplied with the CDC version of the S-WIMS-code. It is a result of the feasibility study of the possibility to update and extend the WIMS library. In the course of its preparation valuable experience was gained in understanding the definitions, the conventions and the structure of the WIMS library. This experience will be used in the preparation of an extended WIMS library for some materials from carefully chosen evaluated data. The library as supplied with the WIMS-D4 package will be used as the basis. The materials added to the library had been tested in reactor calculations and their performance was found to be satisfactory. The aim of releasing the preliminary version of the WIMS library is to allow different users to apply the data to various problems

  9. Fetomaternal hemorrhage during external cephalic version.

    Science.gov (United States)

    Boucher, Marc; Marquette, Gerald P; Varin, Jocelyne; Champagne, Josette; Bujold, Emmanuel

    2008-07-01

    To estimate the frequency and volume of fetomaternal hemorrhage during external cephalic version for term breech singleton fetuses and to identify risk factors involved with this complication. A prospective observational study was performed including all patients undergoing a trial of external cephalic version for a breech presentation of at least 36 weeks of gestation between 1987 and 2001 in our center. A search for fetal erythrocytes using the standard Kleihauer-Betke test was obtained before and after each external cephalic version. The frequency and volume of fetomaternal hemorrhage were calculated. Putative risk factors for fetomaternal hemorrhage were evaluated by chi(2) test and Mann-Whitney U test. A Kleihauer-Betke test result was available before and after 1,311 trials of external cephalic version. The Kleihauer-Betke test was positive in 67 (5.1%) before the procedure. Of the 1,244 women with a negative Kleihauer-Betke test before external cephalic version, 30 (2.4%) had a positive Kleihauer-Betke test after the procedure. Ten (0.8%) had an estimated fetomaternal hemorrhage greater than 1 mL, and one (0.08%) had an estimated fetomaternal hemorrhage greater than 30 mL. The risk of fetomaternal hemorrhage was not influenced by parity, gestational age, body mass index, number of attempts at version, placental location, or amniotic fluid index. The risk of detectable fetomaternal hemorrhage during external cephalic version was 2.4%, with fetomaternal hemorrhage more than 30 mL in less than 0.1% of cases. These data suggest that the performance of a Kleihauer-Betke test is unwarranted in uneventful external cephalic version and that in Rh-negative women, no further Rh immune globulin is necessary other than the routine 300-microgram dose at 28 weeks of gestation and postpartum. II.

  10. Anesthetic management of external cephalic version.

    Science.gov (United States)

    Chalifoux, Laurie A; Sullivan, John T

    2013-09-01

    Breech presentation is common at term and its reduction through external cephalic version represents a noninvasive opportunity to avoid cesarean delivery and the associated maternal morbidity. In addition to uterine relaxants, neuraxial anesthesia is associated with increased success of version procedures when surgical anesthetic dosing is used. The intervention is likely cost effective given the effect size and the avoided high costs of cesarean delivery. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. SHUFFLE. Windows 95/98/2000 version

    International Nuclear Information System (INIS)

    Slavic, S.; Zefran, B.

    2000-01-01

    Program package SHUFFLE was developed to help the user during fuel loading and unloading operations at a nuclear power plant. The first version, developed in 1992, has been written in the CLIPPER program language and run under the DOS operating system. Since the DOS environment exhibits several drawbacks regarding code portability and flexibility, the recent SHUFFLE version has been transformed to run under the MS Windows operating system. (author)

  12. Ecodesign Directive version 2.0

    DEFF Research Database (Denmark)

    This present report reports on the main findings of the project Ecodesign Directive version 2.0 - from Energy Efficiency to Resource Efficiency. The project is financed by the Danish Environmental Protection Agency and ran from December 2012 to June 2014.......This present report reports on the main findings of the project Ecodesign Directive version 2.0 - from Energy Efficiency to Resource Efficiency. The project is financed by the Danish Environmental Protection Agency and ran from December 2012 to June 2014....

  13. Cubical version of combinatorial differential forms

    DEFF Research Database (Denmark)

    Kock, Anders

    2010-01-01

    The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry.......The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry....

  14. Implementing version support for complex objects

    OpenAIRE

    Blanken, Henk

    1991-01-01

    New applications in the area of office information systems, computer aided design and manufacturing make new demands upon database management systems. Among others highly structured objects and their history have to be represented and manipulated. The paper discusses some general problems concerning the access and storage of complex objects with their versions and the solutions developed within the AIM/II project. Queries related to versions are distinguished in ASOF queries (asking informati...

  15. A kernel version of multivariate alteration detection

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Vestergaard, Jacob Schack

    2013-01-01

    Based on the established methods kernel canonical correlation analysis and multivariate alteration detection we introduce a kernel version of multivariate alteration detection. A case study with SPOT HRV data shows that the kMAD variates focus on extreme change observations.......Based on the established methods kernel canonical correlation analysis and multivariate alteration detection we introduce a kernel version of multivariate alteration detection. A case study with SPOT HRV data shows that the kMAD variates focus on extreme change observations....

  16. Press releases — the new trend in science communication

    DEFF Research Database (Denmark)

    Autzen, Charlotte

    2014-01-01

    Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

  17. Bureau of Radiological Health publications index

    International Nuclear Information System (INIS)

    1979-08-01

    The Key Word in Context (KWIC) index to the publications of the Bureau of Radiological Health was prepared to aid in the retrieval and identification of publications originated or authored by Bureau staff or published by the Bureau. These publications include journal articles, government publications and technical reports, selected staff papers, and Bureau news releases issued by HEW. For convenience, the document is divided into four sections, KWIC Index, Author Index, Bibliography Index, and BRH Publications Subject Index

  18. Evaluation of a Swedish version of the Strengthening Families Programme.

    Science.gov (United States)

    Skärstrand, Eva; Sundell, Knut; Andréasson, Sven

    2014-08-01

    Adolescents' alcohol consumption is a public health concern in Sweden as well as in many other countries. Underage drinking is associated with increased risks of alcohol-related injuries, risky sexual behaviours and dependence later in life. Different strategies have been used in the effort to prevent this behaviour, and to postpone the onset of alcohol. The Strengthening Families Programme 10-14 (SFP 10-14) from the USA has been highlighted as one of the more effective prevention programmes. The aim of the present article was to evaluate the effectiveness of a culturally adapted Swedish version of the SFP 10-14. This was a cluster randomized controlled trial including 587 sixth-grade students (age 12) and their parents in 19 elementary schools in Stockholm. Schools were randomly assigned to either control (9 schools, 216 students) or to the family skills training intervention (10 schools, 371 students). The SFP Swedish version consisted of two parts with seven and five sessions, respectively, held separately for youths and parents except two joint family sessions. Measures of students' self-reported episodes of drunkenness, smoking, illicit drug use and other norm-breaking behaviours were collected at baseline (March 2003) and at three subsequent yearly surveys. Data were analysed using multilevel models with an intention-to-treat approach. No preventive effects were found for smoking, alcohol and illicit drug use and other norm-breaking behaviours, nor did moderators affect the outcome. The Swedish version of the SFP 10-14 was not effective in preventing youths' substance use in a Swedish context. © The Author 2013. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  19. Public lighting.

    NARCIS (Netherlands)

    Schreuder, D.A.

    1986-01-01

    The function of public lighting and the relationship between public lighting and accidents are considered briefly as aspects of effective countermeasures. Research needs and recent developments in installation and operational described. Public lighting is an efficient accident countermeasure, but

  20. Discussion on the methods for calculation release limits for low-level radioactive waste

    International Nuclear Information System (INIS)

    Cao Fengbo; Liu Xiaochao

    2012-01-01

    The release request for low-level radioactive waste are briefly described in this paper. Associating with the conditions of low-level radioactive waste of some radioactive waste processing station, the methods and gist for calculating release limits for low-level radioactive waste with national release limits and annual effective dose limit for the public or the occupation are discussed. Then release limits for the low-level radioactive waste are also proposed. (authors)

  1. First validation of the new continuous energy version of the MORET5 Monte Carlo code

    International Nuclear Information System (INIS)

    Miss, Joachim; Bernard, Franck; Forestier, Benoit; Haeck, Wim; Richet, Yann; Jacquet, Olivier

    2008-01-01

    The 5.A.1 version is the next release of the MORET Monte Carlo code dedicated to criticality and reactor calculations. This new version combines all the capabilities that are already available in the multigroup version with many new and enhanced features. The main capabilities of the previous version are the powerful association of a deterministic and Monte Carlo approach (like for instance APOLLO-MORET), the modular geometry, five source sampling techniques and two simulation strategies. The major advance in MORET5 is the ability to perform calculations either a multigroup or a continuous energy simulation. Thanks to these new developments, we now have better control over the whole process of criticality calculations, from reading the basic nuclear data to the Monte Carlo simulation itself. Moreover, this new capability enables us to better validate the deterministic-Monte Carlo multigroup calculations by performing continuous energy calculations with the same code, using the same geometry and tracking algorithms. The aim of this paper is to describe the main options available in this new release, and to present the first results. Comparisons of the MORET5 continuous-energy results with experimental measurements and against another continuous-energy Monte Carlo code are provided in terms of validation and time performance. Finally, an analysis of the interest of using a unified energy grid for continuous energy Monte Carlo calculations is presented. (authors)

  2. Continuous-energy version of KENO V.a for criticality safety applications

    International Nuclear Information System (INIS)

    Dunn, Michael E.; Greene, N. Maurice; Petrie, Lester M.

    2003-01-01

    KENO V.a is a multigroup Monte Carlo code that solves the Boltzmann transport equation and is used extensively in the criticality safety community to calculate the effective multiplication factor of systems with fissionable material. In this work, a continuous-energy or pointwise version of KENO V.a has been developed by first designing a new continuous-energy cross-section format and then by developing the appropriate Monte Carlo transport procedures to sample the new cross-section format. In order to generate pointwise cross sections for a test library, a series of cross-section processing modules were developed and used to process 50 ENDF/B-6 Release 7 nuclides for the test library. Once the cross-section processing procedures were in place, a continuous-energy version of KENO V.a was developed and tested by calculating 21 critical benchmark experiments. The point KENO-calculated results for the 21 benchmarks are in agreement with calculated results obtained with the multigroup version of KENO V.a using the 238-group ENDF/B-5 and 199-group ENDF/B-6 Release 3 libraries. Based on the calculated results with the prototypic cross-section library, a continuous-energy version of the KENO V.a code has been successfully developed and demonstrated for modeling systems with fissionable material. (author)

  3. Publicly Released Prompt Radiation Spectra Suitable for Nuclear Detonation Simulations

    Science.gov (United States)

    2017-03-01

    emission. During the Hiroshima and Nagasaki bombings , the prompt radiation contributed from 40%-70% of the free-in-air dose depending on distance from...intermediate- and low-yield thermonuclear weapons for initial radiation shielding calculations No Gritzner, et al. 1976 ( EM -1, Low, Henre...DNA 4267F ( EM -1 Fission) Neutron Gritzner, et al. 1976 1.00 x 1023 Glasstone (Thermonuclear) Neutron Glasstone & Dolan 1977 1.445 x 1023 ORNL-TM

  4. EJSCREEN States Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The States table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the state...

  5. EJSCREEN Regions Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regions table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the EPA...

  6. EJSCREEN National Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The USA table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the national...

  7. Released radioactivity reducing facility

    International Nuclear Information System (INIS)

    Tanaka, Takeaki.

    1992-01-01

    Upon occurrence of a reactor accident, penetration portions of a reactor container, as a main leakage source from a reactor container, are surrounded by a plurality of gas-tight chambers, the outside of which is surrounded by highly gas-tightly buildings. Branched pipelines of an emergency gas processing system are introduced to each of the gas-tight chambers and they are joined and in communication with an emergency gas processing device. With such a constitution, radioactive materials are prevented from leaking directly from the buildings. Further, pipeline openings of the emergency gas processing facility are disposed in the plurality highly gas-tight penetration chambers. If the radioactive materials are leaked from the reactor to elevate the pressure in the penetration chambers, the radioactive materials are introduced to a filter device in the emergency gas processing facility by way of the branched pipelines, filtered and then released to the atmosphere. Accordingly, the reliability and safety of the system can be improved. (T.M.)

  8. Containment and release management

    International Nuclear Information System (INIS)

    Lehner, J.R.; Pratt, W.T.

    1988-01-01

    Reducing the risk from potentially severe accidents by appropriate accident management strategies is receiving increased attention from the international reactor safety community. Considerable uncertainty still surrounds some of the physical phenomena likely to occur during a severe accident. The USNRC, in developing its research plan for accident management, wants to ensure that both the developers and implementers of accident management strategies are aware of the uncertainty associated with the plant operators' ability to correctly diagnose an accident, as well as the uncertainties associated with various preventive and mitigative strategies. The use of a particular accident management strategy can have both positive and negative effects on the status of a plant and these effects must be carefully weighed before a particular course of action is chosen and implemented. By using examples of severe accident scenarios, initial insights are presented here regarding the indications plant operators may have to alert them to particular accident states. Insights are also offered on the various management actions operators and plant technical staff might pursue for particular accident situations and the pros and cons associated with such actions. The examples given are taken for the most part from the containment and release phase of accident management, since this is the current focus of the effort in the accident management area at Brookhaven National Laboratory. 2 refs

  9. Released radioactivity reducing device

    International Nuclear Information System (INIS)

    Miyamoto, Yumi.

    1995-01-01

    A water scrubber is disposed in a scrubber tank and a stainless steel fiber filter is disposed above the water scrubber. The upper end of the scrubber tank is connected by way of a second bent tube to a capturing vessel incorporating a moisture removing layer and an activated carbon filter. The exit of the capturing vessel is connected to a stack. Upon occurrence of an accident of a BWR-type power plant, gases containing radioactive materials released from a reactor container are discharged into the water scrubber from a first bent tube through a venturi tube nozzle, and water soluble and aerosol-like radioactive materials are captured in the water. Aerosol and splashes of water droplets which can not be captured thoroughly by the water scrubber are captured by the stainless steel fiber filter. Gases passing through the scrubber tank are introduced to a capturing vessel through a second bent tube, and organic iodine is captured by the activated carbon filter. (I.N.)

  10. London SPAN version 4 parameter file format

    International Nuclear Information System (INIS)

    2004-06-01

    Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised trading system. Powernext SA collaborates with the clearing organization LCH.Clearnet SA to secure and facilitate the transactions. The French Standard Portfolio Analysis of Risk (SPAN) is a system used by LCH.Clearnet to calculate the initial margins from and for its clearing members. SPAN is a computerized system which calculates the impact of several possible variations of rates and volatility on by-product portfolios. The initial margin call is equal to the maximum probable loss calculated by the system. This document contains details of the format of the London SPAN version 4 parameter file. This file contains all the parameters and risk arrays required to calculate SPAN margins. London SPAN Version 4 is an upgrade from Version 3, which is also known as LME SPAN. This document contains the full revised file specification, highlighting the changes from Version 3 to Version 4

  11. COMMERCIAL SNF ACCIDENT RELEASE FRACTIONS

    Energy Technology Data Exchange (ETDEWEB)

    S.O. Bader

    1999-10-18

    The purpose of this design analysis is to specify and document the total and respirable fractions for radioactive materials that are released from an accident event at the Monitored Geologic Repository (MGR) involving commercial spent nuclear fuel (CSNF) in a dry environment. The total and respirable release fractions will be used to support the preclosure licensing basis for the MGR. The total release fraction is defined as the fraction of total CSNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. The radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses. This subset of the total release fraction is referred to as the respirable release fraction. Potential accidents may involve waste forms that are characterized as either bare (unconfined) fuel assemblies or confined fuel assemblies. The confined CSNF assemblies at the MGR are contained in shipping casks, canisters, or disposal containers (waste packages). In contrast to the bare fuel assemblies, the container that confines the fuel assemblies has the potential of providing an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. However, this analysis will not take credit for this additional bamer and will establish only the total release fractions for bare unconfined CSNF assemblies, which may however be

  12. COMMERCIAL SNF ACCIDENT RELEASE FRACTIONS

    International Nuclear Information System (INIS)

    S.O. Bader

    1999-01-01

    The purpose of this design analysis is to specify and document the total and respirable fractions for radioactive materials that are released from an accident event at the Monitored Geologic Repository (MGR) involving commercial spent nuclear fuel (CSNF) in a dry environment. The total and respirable release fractions will be used to support the preclosure licensing basis for the MGR. The total release fraction is defined as the fraction of total CSNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. The radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses. This subset of the total release fraction is referred to as the respirable release fraction. Potential accidents may involve waste forms that are characterized as either bare (unconfined) fuel assemblies or confined fuel assemblies. The confined CSNF assemblies at the MGR are contained in shipping casks, canisters, or disposal containers (waste packages). In contrast to the bare fuel assemblies, the container that confines the fuel assemblies has the potential of providing an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. However, this analysis will not take credit for this additional bamer and will establish only the total release fractions for bare unconfined CSNF assemblies, which may however be

  13. Simion 3D Version 6.0 User`s Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dahl, D.A.

    1995-11-01

    The original SIMION was an electrostatic lens analysis and design program developed by D.C. McGilvery at Latrobe University, Bundoora Victoria, Australia, 1977. SIMION for the PC, developed at the Idaho National Engineering Laboratory, shares little more than its name with the original McGilvery version. INEL`s fifth major SIMION release, version 6.0, represents a quantum improvement over previous versions. This C based program can model complex problems using an ion optics workbench that can hold up to 200 2D and/or 3D electrostatic/magnetic potential arrays. Arrays can have up to 10,000,000 points. SIMION 3D`s 32 bit virtual Graphics User Interface provides a highly interactive advanced user environment. All potential arrays are visualized as 3D objects that the user can cut away to inspect ion trajectories and potential energy surfaces. User programs have been greatly extended in versatility and power. A new geometry file option supports the definition of highly complex array geometry. Extensive algorithm modifications have dramatically improved this version`s computational speed and accuracy.

  14. Public safety around dams

    Energy Technology Data Exchange (ETDEWEB)

    Bourassa, H [Centre d' expertise hydrique du Quebec, Quebec, PQ (Canada)

    2009-07-01

    Fourty public dams are managed on a real-time basis by the Centre d'expertise hydrique du Quebec (CEHQ). This presentation described the public dams owned by the CEHQ and discussed the public safety measures at the dams. The dams serve various purposes, including protection against floods; industrial or drinking water supply; resort or recreational activities; hydroelectric development; and wildlife conservation. Trigger events were also discussed, such as the complaint at Rapides-des-Cedres dam and deaths that occurred in 2004 when water from a dam was released without warning. Several photographs were presented to illustrate that people were unaware of the danger. Initiatives aimed at raising awareness and studying public safety issues were discussed. A pilot project was launched and a permanent committee was created to evaluate all aspects of public safety at the dams owned by CEHQ. The first tasks of the committee were to establish requirements for waterway safety barriers, both upstream and downstream, for all public dams; to establish requirements for safety signage for all public dams; and to develop criteria to decide on safety signage at each dam. figs.

  15. Public safety around dams

    Energy Technology Data Exchange (ETDEWEB)

    Bourassa, H. [Centre d' expertise hydrique du Quebec, Quebec, PQ (Canada)

    2009-07-01

    Fourty public dams are managed on a real-time basis by the Centre d'expertise hydrique du Quebec (CEHQ). This presentation described the public dams owned by the CEHQ and discussed the public safety measures at the dams. The dams serve various purposes, including protection against floods; industrial or drinking water supply; resort or recreational activities; hydroelectric development; and wildlife conservation. Trigger events were also discussed, such as the complaint at Rapides-des-Cedres dam and deaths that occurred in 2004 when water from a dam was released without warning. Several photographs were presented to illustrate that people were unaware of the danger. Initiatives aimed at raising awareness and studying public safety issues were discussed. A pilot project was launched and a permanent committee was created to evaluate all aspects of public safety at the dams owned by CEHQ. The first tasks of the committee were to establish requirements for waterway safety barriers, both upstream and downstream, for all public dams; to establish requirements for safety signage for all public dams; and to develop criteria to decide on safety signage at each dam. figs.

  16. Underground water stress release models

    Science.gov (United States)

    Li, Yong; Dang, Shenjun; Lü, Shaochuan

    2011-08-01

    The accumulation of tectonic stress may cause earthquakes at some epochs. However, in most cases, it leads to crustal deformations. Underground water level is a sensitive indication of the crustal deformations. We incorporate the information of the underground water level into the stress release models (SRM), and obtain the underground water stress release model (USRM). We apply USRM to the earthquakes occurred at Tangshan region. The analysis shows that the underground water stress release model outperforms both Poisson model and stress release model. Monte Carlo simulation shows that the simulated seismicity by USRM is very close to the real seismicity.

  17. SHABERTH - ANALYSIS OF A SHAFT BEARING SYSTEM (CRAY VERSION)

    Science.gov (United States)

    Coe, H. H.

    1994-01-01

    IBM PC version is a set of two 5.25 inch 360K MS-DOS format diskettes. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. The standard distribution medium for the CRAY version is also a 5.25 inch 360K MS-DOS format diskette, but alternate distribution media and formats are available upon request. The original version of SHABERTH was developed in FORTRAN IV at Lewis Research Center for use on a UNIVAC 1100 series computer. The Cray version was released in 1988, and was updated in 1990 to incorporate fluid rheological data for Rocket Propellant 1 (RP-1), thereby allowing the analysis of bearings lubricated with RP-1. The PC version is a port of the 1990 CRAY version and was developed in 1992 by SRS Technologies under contract to NASA Marshall Space Flight Center.

  18. Flash release an alternative for releasing complex MEMS devices

    NARCIS (Netherlands)

    Deladi, S.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2004-01-01

    A novel time-saving and cost-effective release technique has been developed and is described. The physical nature of the process is explained in combination with experimental observations. The results of the flash release process are compared with those of freeze-drying and supercritical CO2

  19. bulletin Publication 2009

    CERN Document Server

    DSU Unit

    2008-01-01

    The table below lists the 2009 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Publication date 3-4 Tuesday 6 January Monday 12 January 5-6 Tuesday 20 January Monday 26 January 7-8 Tuesday 3 February Monday 9 February 9-10 Tuesday 17 February Monday 23 February 11-12 Tuesday 3 March Monday 9 March 13-14 Tuesday 17 March Monday 23 March 15-16-17 (Easter issue) Tuesday 31 March Monday 6 April 18-19 Tuesday 21 April Monday 27 April 20-21 Tuesday 5 May Monday 11 May 22-23 Tuesday 19 May Monday 25 May 24-25 ...

  20. New developments in program STANSOL version 3

    International Nuclear Information System (INIS)

    Gray, W.H.

    1981-10-01

    STANSOL is a computer program that applied a solution for the mechanical displacement, stress, and strain in rotationally-transversely isotropic, homogeneous, axisymmetric solenoids. Careful application of the solution permits the complex mechanical behavior of multilayered, nonhomogeneous solenoids to be examined in which the loads may vary arbitrarily from layer to layer. Loads applied to the solenoid model by program STANSOL may consist of differential temperature, winding preload, internal and/or external surface pressure, and electromagnetic Lorentz body forces. STANSOL version 3, the latest update to the original version of the computer program, also permits structural analysis of solenoid magnets in which frictionless interlayer gaps may open or close. This paper presents the new theory coded into version 3 of the STANSOL program, as well as the new input data format and graphical output display of the resulting analysis

  1. McXtrace 1.4: latest developments in the new release

    DEFF Research Database (Denmark)

    Knudsen, Erik B.; Willendrup, Peter Kjær; Garde, Jakob

    2017-01-01

    This paper presents details on some of the important new features in the newly released version of the x-ray tracing software package McXtrace. Although many developments have been made, this presentation is focused on the features that were required to meet the challenges posed for accurate simu...

  2. Public Sector IS Maturity Models

    DEFF Research Database (Denmark)

    Zinner Henriksen, Helle; Andersen, Kim Normann; Medaglia, Rony

    2011-01-01

    Online applications and processing of tax forms, driver licenses, and construction permits are examples of where policy attention and research have been united in efforts aiming to categorize the maturity level of e-services. Less attention has been attributed to policy areas with continuous online...... citizenpublic interaction, such as in public education. In this paper we use a revised version of the Public Sector Process Rebuilding (PPR) maturity model for mapping 200 websites of public primary schools in Denmark. Findings reveal a much less favorable picture of the digitization of the Danish public sector...... compared to the high ranking it has received in the international benchmark studies. This paper aims at closing the gap between the predominant scope of maturity models and the frequency of citizen-public sector interaction, and calls for increased attention to the activities of government where the scale...

  3. Chronic Condition Public Use File (PUF)

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Chronic Conditions Public Use Files (PUF) with information from Medicare claims. The CMS Chronic Conditions PUF is an aggregated file in...

  4. An Improved Version of TOPAZ 3D

    International Nuclear Information System (INIS)

    Krasnykh, Anatoly

    2003-01-01

    An improved version of the TOPAZ 3D gun code is presented as a powerful tool for beam optics simulation. In contrast to the previous version of TOPAZ 3D, the geometry of the device under test is introduced into TOPAZ 3D directly from a CAD program, such as Solid Edge or AutoCAD. In order to have this new feature, an interface was developed, using the GiD software package as a meshing code. The article describes this method with two models to illustrate the results

  5. A kernel version of spatial factor analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    2009-01-01

    . Schölkopf et al. introduce kernel PCA. Shawe-Taylor and Cristianini is an excellent reference for kernel methods in general. Bishop and Press et al. describe kernel methods among many other subjects. Nielsen and Canty use kernel PCA to detect change in univariate airborne digital camera images. The kernel...... version of PCA handles nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function and then performing a linear analysis in that space. In this paper we shall apply kernel versions of PCA, maximum autocorrelation factor (MAF) analysis...

  6. Stratified B-trees and versioning dictionaries

    OpenAIRE

    Twigg, Andy; Byde, Andrew; Milos, Grzegorz; Moreton, Tim; Wilkes, John; Wilkie, Tom

    2011-01-01

    A classic versioned data structure in storage and computer science is the copy-on-write (CoW) B-tree -- it underlies many of today's file systems and databases, including WAFL, ZFS, Btrfs and more. Unfortunately, it doesn't inherit the B-tree's optimality properties; it has poor space utilization, cannot offer fast updates, and relies on random IO to scale. Yet, nothing better has been developed since. We describe the `stratified B-tree', which beats all known semi-external memory versioned B...

  7. Why Should We Care What the Public Thinks?

    DEFF Research Database (Denmark)

    Thomsen, Frej Klem

    2014-01-01

    This chapter explores three versions of the argument to the effect that we ought to punish in accordance with popular sentiment: While the first two versions of the argument are rejected, it is held that the third argument may provide a reason in favour of incorporating public opinion....

  8. Public service motivation and job performance of public sector employees in the Netherlands

    NARCIS (Netherlands)

    Leisink, P.L.M.; Steijn, B.

    2009-01-01

    This article contributes in three ways to our understanding of public service motivation (PSM) and its effects. In the first place, it applies an abridged version of Perry's measurement scale in the Dutch public sector. Although the results of the analysis show that PSM is a valid concept in this

  9. System for Capturing/Storage/Retrieval/Sharing of Toxicological Information Required for Rapid Assessment of Risks Posed By Release of CBRN Materials in the Environment

    International Nuclear Information System (INIS)

    Taylor, M. L.; Ritondo, M.; Earp Singer, L.; Rogers, J. V.; Price, J. A.; Fleming, E. J.; Chappie, D.; McGonigle, D.; Nichols, T. L.; Sonich-Mullin, C.

    2007-01-01

    The Threat and Consequence Assessment Division (TCAD) of the U.S. Environmental Protection Agency's (EPA) National Homeland Security Research Center (NHSRC) is developing methodology for performing rapid risk assessments needed for incident management, cleanup, and mitigation of hazards in the aftermath of a terrorist event. TCAD, working with the Department of Defense's Chemical and Biological Defense Information Analysis Center (CBIAC, operated by Battelle) has developed SERRA - Support for Environmental Rapid Risk Assessment. This paper describes the methodology utilized to formulate SERRA, presents current contents of the SERRA database (information derived from assessments of over 3,000 publications selected from 10,000 citations), and describes SERRA implementation. The paper also discusses how an Internet-accessible version of the SERRA database could be utilized by a country or countries to prepare for and respond to the intentional release of chemical, biological or radiological materials.(author)

  10. ATLAS and CMS Data Release and Tools

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00355153; The ATLAS collaboration

    2016-01-01

    The data collected at the LHC has provided the basis for a vast body of scientific publications and the training of physicists. In light of these benefits it is desirable to also enable people outside the LHC collaborations to profit from the educational opportunities of the LHC data. The goal of the open data initiative is to provide these opportunities by making LHC data available to the general public. This talk will discuss the open data policies of both the ATLAS and CMS document and how these policies are implemented in practice. The open data portal will be presented and the contents made available by the collaborations reviewed emphasising possible use cases. The talk will be concluded with a summary of the plans for upcoming data releases.

  11. Survey of state funding for public transportation 2010

    Science.gov (United States)

    2010-07-01

    The AASHTO Standing Committee on Public Transportation is pleased to release the Survey of State : Funding for Public Transportation. The survey results reflect Fiscal Year 2008 data. This annual report : provides a snapshot of state-by-state investm...

  12. Communicating with the Public: Getting It into Print.

    Science.gov (United States)

    Dyal, Donald

    1988-01-01

    Discusses the advantages for libraries of utilizing print media for public information and public relations. News releases, interest stories, and feature stories are described, and hints on writing style for each format and on getting items printed are offered. (MES)

  13. Sustained release of radioprotective agents

    International Nuclear Information System (INIS)

    Shani, J.

    1980-11-01

    New pharmaceutical formulations for the sustained release into the G.I. tract of radioprotective agents have been developed by the authors. The experimental method initially consisted in the production of methylcellulose microcapsules. This method failed apparently because of the premature ''explosion'' of the microcapsules and the consequent premature release of massive amounts of the drug. A new method has been developed which consists in drying and pulverising cysteamine and cysteine preparations, mixing them in various proportions with stearic acid and ethylcellulose as carriers. The mixture is then compressed into cylindrical tablets at several pressure values and the leaching rate of the radioprotective agents is then measured by spectrophotometry. The relation between the concentration of the active drug and its rate of release, and the effect on the release rate of the pressure applied to the tablet during its formation were also investigated. Results indicating that the release rate was linearly related to the square root of ''t'' seem to be in agreement with what is predictable, according to Higuchi's equation, save for the very initial and terminal phases. A clear correlation was also established between the stearic acid/ethylcellulose ratios and the release of 20% cysteine, namely a marked decrease in the rate of cysteine release was observed with increasing concentrations of stearic acid. Finally, it was observed that a higher formation pressure results in quicker release of the drug

  14. Press Oil Final Release Survey

    Energy Technology Data Exchange (ETDEWEB)

    Whicker, Jeffrey Jay [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ruedig, Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-11

    There are forty-eight 55 gallon barrels filled with hydraulic oil that are candidates for release and recycle. This oil needs to be characterized prior to release. Principles of sampling as provided in MARSAME/MARSSIM approaches were used as guidance for sampling.

  15. Workload Control with Continuous Release

    NARCIS (Netherlands)

    Phan, B. S. Nguyen; Land, M. J.; Gaalman, G. J. C.

    2009-01-01

    Workload Control (WLC) is a production planning and control concept which is suitable for the needs of make-to-order job shops. Release decisions based on the workload norms form the core of the concept. This paper develops continuous time WLC release variants and investigates their due date

  16. Two studies: working in public

    OpenAIRE

    Sleeper, Clinton James

    2014-01-01

    Two Studies: Working in Public is comprised of release of an artist book and the presentation of several large-scale projections created from original recombinant video. Developed around research into generosity, maintenance, urbanism, and novel practices, this ambitious investigation of Mierle Laderman Ukeles’ Manifesto for Maintenance Art includes a generative video system; which sorts through source footage of the artist repairing public benches and playgrounds. The artwork also includes a...

  17. Development and Validation of the Pediatric Medical Complexity Algorithm (PMCA) Version 3.0.

    Science.gov (United States)

    Simon, Tamara D; Haaland, Wren; Hawley, Katherine; Lambka, Karen; Mangione-Smith, Rita

    2018-02-26

    To modify the Pediatric Medical Complexity Algorithm (PMCA) to include both International Classification of Diseases, Ninth and Tenth Revisions, Clinical Modification (ICD-9/10-CM) codes for classifying children with chronic disease (CD) by level of medical complexity and to assess the sensitivity and specificity of the new PMCA version 3.0 for correctly identifying level of medical complexity. To create version 3.0, PMCA version 2.0 was modified to include ICD-10-CM codes. We applied PMCA version 3.0 to Seattle Children's Hospital data for children with ≥1 emergency department (ED), day surgery, and/or inpatient encounter from January 1, 2016, to June 30, 2017. Starting with the encounter date, up to 3 years of retrospective discharge data were used to classify children as having complex chronic disease (C-CD), noncomplex chronic disease (NC-CD), and no CD. We then selected a random sample of 300 children (100 per CD group). Blinded medical record review was conducted to ascertain the levels of medical complexity for these 300 children. The sensitivity and specificity of PMCA version 3.0 was assessed. PMCA version 3.0 identified children with C-CD with 86% sensitivity and 86% specificity, children with NC-CD with 65% sensitivity and 84% specificity, and children without CD with 77% sensitivity and 93% specificity. PMCA version 3.0 is an updated publicly available algorithm that identifies children with C-CD, who have accessed tertiary hospital emergency department, day surgery, or inpatient care, with very good sensitivity and specificity when applied to hospital discharge data and with performance to earlier versions of PMCA. Copyright © 2018 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  18. DOE-2 supplement: Version 2.1E

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, F.C.; Birdsall, B.E.; Buhl, W.F.; Ellington, K.L.; Erdem, A.E. [Lawrence Berkeley Lab., CA (United States); Hirsch, J.J.; Gates, S. [Hirsch (James J.) and Associates, Camarillo, CA (United States)

    1993-11-01

    This publication updates the DOE-2 Supplement form version 2.1D to version to 2.1E. It contains detailed discussions and instructions for using the features and enhancements introduced into the 2.1B, 2.1C, 2.1D, and 2.1E versions of the program. The building description section contains information on input functions in loads and systems, hourly report frequencies, saving files of hourly output for post processing, sharing hourly report data among program modules, the metric option, and input macros and general library features. The loads section contains information on sunspaces, sunspace modeling, window management and solar radiation, daylighting, trombe walls, fixed shades, fins and overhangs, shade schedules, self shades, heat distribution from lights, the Sherman-Grimsrud infiltrations method. terrain and height modification to wind speed, floor multipliers and interior wall types, improved exterior infrared radiation loss calculation, improved outside air film conductance calculation, window library, window frames, and switchable glazing. The systems section contains information on energy end use and meters, powered induction units, a packaged variable volume -- variable temperature system, a residential variable volume -- variable temperature system, air source heat pump enhancements, water loop heat pump enhancements, variable speed electric heat pump, gas heat pumps, hot water heaters, evaporative cooling, total gas solid-desiccant systems, add on desiccant cooling, water cooled condensers, evaporative precoolers outside air economizer control, optimum fan start, heat recovery from refrigerated case work, night ventilation, baseboard heating, moisture balance calculations, a residential natural ventilation algorithm, improved cooling coil model, system sizing and independent cooling and heating sizing ratios. The plant section contains information on energy meters, gas fired absorption chillers, engine driven compressor chillers, and ice energy storage.

  19. Toxic releases from power plants

    International Nuclear Information System (INIS)

    Rubin, E.S.

    1999-01-01

    Beginning in 1998, electric power plants burning coal or oil must estimate and report their annual releases of toxic chemicals listed in the Toxics Release Inventory (TRI) published by the US Environmental Protection Agency (EPA). This paper identifies the toxic chemicals of greatest significance for the electric utility sector and develops quantitative estimates of the toxic releases reportable to the TRI for a representative coal-fired power plant. Key factors affecting the magnitude and types of toxic releases for individual power plants also are discussed. A national projection suggests that the magnitude of electric utility industry releases will surpass those of the manufacturing industries which current report to the TRI. Risk communication activities at the community level will be essential to interpret and provide context for the new TRI results

  20. Stress analysis for robot arm version 2

    International Nuclear Information System (INIS)

    Anwar Abdul Rahman; Fikri, A.; Salleh, M. S.; Mohd Arif Hamzah; Azraf Azman; Rosli Darmawan; Mohd Rizal Mamat

    2010-01-01

    The design of a robot needs to be analyzed to ensure the specification and requirement by the user is full filled. Therefore, stress analysis has been performed on the robot arm version 2 after its complete fabrication. This paper discusses the result of the analysis and proposed measures to improve the future design of robot arm. (author)

  1. PROSA version 4.0 manual

    International Nuclear Information System (INIS)

    Bicking, U.; Golly, W.; Peter, N.; Seifert, R.

    1991-05-01

    This report includes a comprehensive manual of the computer program PROSA which illustrate the handling and functioning of PROSA. The manual PROSA 4.0 (FORTRAN 77) describes the PC Version of PROSA including its program moduls. The PROSA program package is a statistical tool to decide on the basis of statistical assumptions whether in a given sequence of material balance periods a loss of material might have occurred. The evaluation of the material balance data is based on statistical test procedures. In the present PROSA Version 4.0 the three tests CUMUF test, PAGE's test and GEMUF test are applied to a sequence of material balances. PROSA Version 4.0 supports a real sequential evaluation. That means, PROSA is not only able to evaluate a series of MUF values sequentially after the campaign has finished, but also real sequentially during the campaign. PROSA Version 4.0 is a menu-guided computer program. Data input can be performed either by diskette or by key-enter. Result output is primarily an information whether or not an alarm is indicated. This information can be displayed either numerically or graphically. Therefore, a comfortable graphical output utility is attached to PROSA 4.0. The program moduls are compiled and linked with the Ryan Mc-Farland Compiler. The PROSA graphical utility uses the PLOT88 Library of Plotworks, Inc. (orig./HP) [de

  2. WIMSD4 Version 101 and cataloged procedure

    International Nuclear Information System (INIS)

    Roth, M.J.; Taubman, C.J.; Lawrence, J.H.

    1982-06-01

    The changes made to WIMSD4 to produce Version 101 on the Harwell IBM 3033 and the Winfrith ICL 2976 computers are summarised. A detailed description of the amended catalogued procedure for executing WIMSD4 on the Harwell Computer is given. (author)

  3. ICRAF Species Switchboard. Version 1.2

    DEFF Research Database (Denmark)

    Kindt, R.; Ordonez, J.; Smith, E.

    2015-01-01

    The current version of the Agroforestry Species Switchboard documents the presence of a total of 26,135 plant species (33,813 species including synonyms) across 19 web-based databases. When available, hyperlinks to information on the selected species in particular databases are provided. In total...

  4. Public Schools

    Data.gov (United States)

    Department of Homeland Security — This Public Schools feature dataset is composed of all Public elementary and secondary education in the United States as defined by the Common Core of Data, National...

  5. The version 3 OMI NO2 standard product

    Directory of Open Access Journals (Sweden)

    N. A. Krotkov

    2017-09-01

    Full Text Available We describe the new version 3.0 NASA Ozone Monitoring Instrument (OMI standard nitrogen dioxide (NO2 products (SPv3. The products and documentation are publicly available from the NASA Goddard Earth Sciences Data and Information Services Center (https://disc.gsfc.nasa.gov/datasets/OMNO2_V003/summary/. The major improvements include (1 a new spectral fitting algorithm for NO2 slant column density (SCD retrieval and (2 higher-resolution (1° latitude and 1.25° longitude a priori NO2 and temperature profiles from the Global Modeling Initiative (GMI chemistry–transport model with yearly varying emissions to calculate air mass factors (AMFs required to convert SCDs into vertical column densities (VCDs. The new SCDs are systematically lower (by ∼ 10–40 % than previous, version 2, estimates. Most of this reduction in SCDs is propagated into stratospheric VCDs. Tropospheric NO2 VCDs are also reduced over polluted areas, especially over western Europe, the eastern US, and eastern China. Initial evaluation over unpolluted areas shows that the new SPv3 products agree better with independent satellite- and ground-based Fourier transform infrared (FTIR measurements. However, further evaluation of tropospheric VCDs is needed over polluted areas, where the increased spatial resolution and more refined AMF estimates may lead to better characterization of pollution hot spots.

  6. Clearance and release from control - An international perspective

    International Nuclear Information System (INIS)

    Thierfeldt, S.

    2005-01-01

    This paper tries to give an overview of the clearance, or release from regulatory control, on an international scale, including some of those countries where clearance has become or is about to become vital for D and D. The emphasis lies on the impact of clearance, and in particular of differences between clearance levels of various countries, on D and D. Relevance of clearance for D and D of nuclear installations Clearance is an essential part of waste management (or more general, material management) in nuclear installations, and in particular during the decommissioning phase where waste streams continues to arise. Of course, the relevance of clearance in a particular country depends on a number of factors, like: availability of a final repository and its price; prevailing decommissioning strategy; number of nuclear installations reaching decommissioning phase. This small selection of reasons why clearance may be of varying importance for different countries may already suffice to illustrate why up to now clearance has been developed and implemented in quite different ways. If one thinks of additional reasons that may influence clearance, like politics, the public opinion, availability of funds etc., the situation becomes even more complex. It is, however safe to draw the conclusion that countries with a certain number of nuclear installations which have been or will soon be shut down or which are already in the decommissioning phase will need to implement provisions for clearance. This has indeed been the case with countries like the UK, Germany, the USA, Sweden, and a number of others. It is not essential for clearance levels to be exactly equal between various countries. They may differ as long as the difference is not too large, e.g. the values fall into the same order of magnitude. This is the reason why for example Germany has no problems with clearance levels which differ from the EU recommendation RP 122 partially adopted in a number of EU countries

  7. Public acceptability

    International Nuclear Information System (INIS)

    Bolter, H.E.

    1989-01-01

    An urgent need to rebuild public confidence after an incident attracting widespread adverse publicity led to the development by British Nuclear Fuels plc of a completely new approach to public relations. The Company's experience suggests that impressions count more than sheer information, provided the impressions have a firm base in reality. (author)

  8. Publication of the 'Smyth Report'

    Energy Technology Data Exchange (ETDEWEB)

    Smyth, H D

    1962-12-02

    The author discusses the problem of informing the public about the consequences of the discovery of chain reaction, as well about the possible use of atomic energy for military and civil purposes. The history of the releasing of the so called 'Smyth Report' is given

  9. The effects of FreeSurfer version, workstation type, and Macintosh operating system version on anatomical volume and cortical thickness measurements.

    Science.gov (United States)

    Gronenschild, Ed H B M; Habets, Petra; Jacobs, Heidi I L; Mengelers, Ron; Rozendaal, Nico; van Os, Jim; Marcelis, Machteld

    2012-01-01

    FreeSurfer is a popular software package to measure cortical thickness and volume of neuroanatomical structures. However, little if any is known about measurement reliability across various data processing conditions. Using a set of 30 anatomical T1-weighted 3T MRI scans, we investigated the effects of data processing variables such as FreeSurfer version (v4.3.1, v4.5.0, and v5.0.0), workstation (Macintosh and Hewlett-Packard), and Macintosh operating system version (OSX 10.5 and OSX 10.6). Significant differences were revealed between FreeSurfer version v5.0.0 and the two earlier versions. These differences were on average 8.8 ± 6.6% (range 1.3-64.0%) (volume) and 2.8 ± 1.3% (1.1-7.7%) (cortical thickness). About a factor two smaller differences were detected between Macintosh and Hewlett-Packard workstations and between OSX 10.5 and OSX 10.6. The observed differences are similar in magnitude as effect sizes reported in accuracy evaluations and neurodegenerative studies.The main conclusion is that in the context of an ongoing study, users are discouraged to update to a new major release of either FreeSurfer or operating system or to switch to a different type of workstation without repeating the analysis; results thus give a quantitative support to successive recommendations stated by FreeSurfer developers over the years. Moreover, in view of the large and significant cross-version differences, it is concluded that formal assessment of the accuracy of FreeSurfer is desirable.

  10. The effects of FreeSurfer version, workstation type, and Macintosh operating system version on anatomical volume and cortical thickness measurements.

    Directory of Open Access Journals (Sweden)

    Ed H B M Gronenschild

    Full Text Available FreeSurfer is a popular software package to measure cortical thickness and volume of neuroanatomical structures. However, little if any is known about measurement reliability across various data processing conditions. Using a set of 30 anatomical T1-weighted 3T MRI scans, we investigated the effects of data processing variables such as FreeSurfer version (v4.3.1, v4.5.0, and v5.0.0, workstation (Macintosh and Hewlett-Packard, and Macintosh operating system version (OSX 10.5 and OSX 10.6. Significant differences were revealed between FreeSurfer version v5.0.0 and the two earlier versions. These differences were on average 8.8 ± 6.6% (range 1.3-64.0% (volume and 2.8 ± 1.3% (1.1-7.7% (cortical thickness. About a factor two smaller differences were detected between Macintosh and Hewlett-Packard workstations and between OSX 10.5 and OSX 10.6. The observed differences are similar in magnitude as effect sizes reported in accuracy evaluations and neurodegenerative studies.The main conclusion is that in the context of an ongoing study, users are discouraged to update to a new major release of either FreeSurfer or operating system or to switch to a different type of workstation without repeating the analysis; results thus give a quantitative support to successive recommendations stated by FreeSurfer developers over the years. Moreover, in view of the large and significant cross-version differences, it is concluded that formal assessment of the accuracy of FreeSurfer is desirable.

  11. A fully updated version of the European utility requirement (EUR) documents is to be available

    International Nuclear Information System (INIS)

    Chatry, J.P.; Berbey, P.

    2001-01-01

    The major European electricity producers have worked on a common requirement document for future LWR plants since 1992 to get specifications acceptable together by the owners, the public and the authorities. Thus the designers can develop standard LWR designs that could be acceptable everywhere in Europe and the utilities can open their consultations to vendors on common bases. Public and authority's acceptance should be improved as well. Significant savings are expected in development and construction costs. Since the release of the last versions of the EUR texts in 1996, a lot of work has been carried out: reviews by the regulators and other external organisations, comparisons, assessment of compliance of designs vs. EUR and clarification works on the controversial topics that deserved changes or clarification. At the beginning of 1999 enough material was available to start a complete revision of the EUR document. Volumes 1 and 2 of the EUR document list generic nuclear island requirements. The main NPP vendors are developing advanced LWR designs for the European market, with reference to the EUR document. Volume 3 deals with the application of EUR to those designs. The EUR utilities -with contributions of the vendors- are writing specific parts of the EUR document that address some of these designs. Each part includes a plant description and an assessment of its level of compliance with EUR. The first three parts deal with EPR (1500 MW PWR developed by NPI, Framatome and Siemens), EPP (1000 MW PWR with passive safety features developed by Westinghouse and Ansaldo) and BWR 90 (1300 MW BWR developed by ABB Atom). Two other subsets are: one for ABWR (1300 MW BWR developed by GE), the other one for SWR 1000 (1000 MW BWR with passive safety features developed by Siemens). This large and diverse set of designs actually gives the EUR document a very strong base. Revision B of Volume 4 incorporates responses to the comments collected on revision A. Considering all that

  12. Savannah River release: test of the new ARAC capability

    International Nuclear Information System (INIS)

    Dickerson, M.H.

    1977-01-01

    Working jointly from opposite sides of the nation Lawrence Livermore Laboratory (LLL) and the Savannah River Laboratory (SRL) quickly assessed the consequences of an early-morning tritium release in May 1974 from the Savannah River Plant, in South Carolina. Measurements confirmed the accuracy of the LLL predictions. Due to the small quantity involved and to the release location (well within the plant confines), the release was not dangerous to the public. The emergency provided a dramatic test of procedures and capabilities of the new Atmospheric Release Advisory Capability (ARAC) center at Livermore, which was not yet operational, demonstrating the capacity for quick response, and the feasibility of real-time data acquisition and transmittal across the continent

  13. Should repository release criteria be based on collective dose, release limits, or individual doses?

    International Nuclear Information System (INIS)

    Channell, J.K.; Neill, R.H.

    1999-01-01

    The advantages and disadvantages of using each of 3 alternative methods (collective dose, release limits, and individual dose) as release criteria for determining long-term high level or transuranic waste repository performance of naturally occurring releases or man-made intrusions are evaluated. Each of the alternative approaches have positive aspects and each has uncertainties that require some arbitrary assumptions. A comparison of the numerical results from evaluating the three alternatives at WIPP leads to the conclusion that a collective dose is preferable because it is more site specific and allows consideration of the full effects of human intrusion. The main objection to release limits is they do not use site specific criteria to determine the radiological effect on local and regional populations. Individual dose criteria used and recommended in the United States have ignored doses to drillers and the public from wastes brought to the surface by human intrusion because these doses can be greater than acceptable limits. Also, there is disagreement about defining the location and lifestyle of the individual

  14. Versioning for CMIP6 in the Earth System Grid Federation

    Science.gov (United States)

    Weigel, Tobias; Kindermann, Stephan; Lautenschlager, Michael

    2015-04-01

    The Earth System Grid Federation (ESGF) has been used as the e-infrastructure to provide access to CMIP5 data and is expected to serve CMIP6 data as well. 2015 marks the year of continued planning and preparation where new concepts can still be implemented for the operational phase of CMIP6. A particular concern within ESGF operations is the versioning and automated replication of data. From CMIP5 experience we know that the pathway between initial submission of modelling data to the ESGF data space and quality-controlled long-term archival of the final products is long and far from linear. Data may be retracted, amended and updated, and metadata may accumulate at different stages. It is unrealistic to assume that a simple and straightforward process can be used as a role model to build ESGF services around the different stages data will pass through during the active phase of CMIP6. Nonetheless, at the technical level ESGF requires some form of automated control and management. At the same time, the accountability of data products must be made transparent to guard against misinterpretation, increase user experience and promote open and reproducible science. To address the challenges, first some essential versioning policies must be agreed upon and enforced through technical means and organizational processes. The volatile readiness state of CMIP data cannot be changed as it is given by the users; however its management can be improved. A promising approach is to embed persistent identifiers in all CMIP6 data objects and register them so they can be globally resolved by any user and used as reference points within ESGF management processes. A specific conceptual interpretation and management of such identifiers can ensure that they remain valid and useful even if the data objects change or become unavailable. For this, identifiers must be assigned to individual versions and aggregations, connected with each other and integrated in the existing ESGF publication

  15. Release plan for Big Pete

    International Nuclear Information System (INIS)

    Edwards, T.A.

    1996-11-01

    This release plan is to provide instructions for the Radiological Control Technician (RCT) to conduct surveys for the unconditional release of ''Big Pete,'' which was used in the removal of ''Spacers'' from the N-Reactor. Prior to performing surveys on the rear end portion of ''Big Pete,'' it shall be cleaned (i.e., free of oil, grease, caked soil, heavy dust). If no contamination is found, the vehicle may be released with the permission of the area RCT Supervisor. If contamination is found by any of the surveys, contact the cognizant Radiological Engineer for decontamination instructions

  16. Commercial SNF Accident Release Fractions

    Energy Technology Data Exchange (ETDEWEB)

    J. Schulz

    2004-11-05

    The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M&O 1999). In contrast to bare unconfined fuel assemblies, the

  17. Commercial SNF Accident Release Fractions

    International Nuclear Information System (INIS)

    Schulz, J.

    2004-01-01

    The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M andO 1999). In contrast to bare unconfined fuel assemblies, the

  18. Content and functions of the pilot version 1 of RODOS/RESY

    International Nuclear Information System (INIS)

    Benz, G.; Ehrhardt, J.; Faude, D.; Fischer, F.; Paesler-Sauer, J.; Rafat, M.; Schichtel, T.; Schuele, O.; Steinhauer, C.

    1994-01-01

    RODOS/RESY is an integrated real-time on-line decision support system for external emergency management after nuclear accidents. It is part of the comprehensive RODOS-system (real-time on-line decision support), which is designed for use in Europe after accidental releases of radioactive material to the atmosphere and hydrosphere. RODOS/RESY is limited in its applicability to the near range of nuclear facilities and the early phase of an accident with airborne radioactive releases. Therefore, it serves directly as a decision-aiding tool for countermeasure actions in the responsibility of local emergency management authorities. At present, RODOS is and RandD project which aims at the further development for operational use of the first prototype version completed in autumn 1992. A first step towards this goal will be the pilot version 1 of RODOS/RESY, which bill be ready by the end of 1994 for coupling to monitoring networks of nuclear reactor remote control surveillance systems and pre-operational use. The report describes the structure, content and functions of this pilot version. (orig.) [de

  19. FORECAST: Regulatory effects cost analysis software manual -- Version 4.1. Revision 1

    International Nuclear Information System (INIS)

    Lopez, B.; Sciacca, F.W.

    1996-07-01

    The FORECAST program was developed to facilitate the preparation of the value-impact portion of NRC regulatory analyses. This PC program integrates the major cost and benefit considerations that may result from a proposed regulatory change. FORECAST automates much of the calculations typically needed in a regulatory analysis and thus reduces the time and labor required to perform these analyses. More importantly, its integrated and consistent treatment of the different value-impact considerations should help assure comprehensiveness, uniformity, and accuracy in the preparation of NRC regulatory analyses. The Current FORECAST Version 4.1 has been upgraded from the previous version and now includes an uncertainty package, an automatic cost escalation package, and other improvements. In addition, it now explicitly addresses public health impacts, occupational health impacts, onsite property damage, and government costs. Thus, FORECAST Version 4.1 can treat all attributes normally quantified in a regulatory analysis

  20. A comparison of the Space Station version of ASTROMAG with two free-flyer versions

    International Nuclear Information System (INIS)

    Green, M.A.

    1992-06-01

    This Report compares the Space Station version of ASTROMAG with free-flyer versions of ASTROMAG which could fly on an Atlas lla rocket and a Delta rocket. Launch with either free-flyer imposes severe weight limits on the magnet and its cryogenic system. Both versions of ASTROMAG magnet which fly on free-flying satellites do not have to be charged more than once during the mission. This permits one to simplify the charging system and the cryogenic system. The helium ll pump loop which supplies helium to the gas cooled electrical leads can be eliminated in both of the free-flyer versions of the ASTROMAG magnet. This report describes the superconducting dipole moment correction coils which are necessary for the magnet to operate on a free-flying satellite

  1. Major Upgrades to the AIRS Version-6 Ozone Profile Methodology

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena

    2015-01-01

    This research is a continuation of part of what was shown at the last AIRS Science Team Meeting in the talk Improved Water Vapor and Ozone Profiles in SRT AIRS Version-6.X and the AIRS February 11, 2015 NetMeeting Further improvements in water vapor and ozone profiles compared to Version-6.AIRS Version-6 was finalized in late 2012 and is now operational. Version-6 contained many significant improvements in retrieval methodology compared to Version-5. However, Version-6 retrieval methodology used for the water vapor profile q(p) and ozone profile O3(p) retrievals is basically unchanged from Version-5, or even from Version-4. Subsequent research has made significant improvements in both water vapor and O3 profiles compared to Version-6. This talk will concentrate on O3 profile retrievals. Improvements in water vapor profile retrievals are given in a separate presentation.

  2. APT - NASA ENHANCED VERSION OF AUTOMATICALLY PROGRAMMED TOOL SOFTWARE - STAND-ALONE VERSION

    Science.gov (United States)

    Premo, D. A.

    1994-01-01

    The APT code is one of the most widely used software tools for complex numerically controlled (N/C) machining. APT is an acronym for Automatically Programmed Tools and is used to denote both a language and the computer software that processes that language. Development of the APT language and software system was begun over twenty years ago as a U. S. government sponsored industry and university research effort. APT is a "problem oriented" language that was developed for the explicit purpose of aiding the N/C machine tools. Machine-tool instructions and geometry definitions are written in the APT language to constitute a "part program." The APT part program is processed by the APT software to produce a cutter location (CL) file. This CL file may then be processed by user supplied post processors to convert the CL data into a form suitable for a particular N/C machine tool. This June, 1989 offering of the APT system represents an adaptation, with enhancements, of the public domain version of APT IV/SSX8 to the DEC VAX-11/780 for use by the Engineering Services Division of the NASA Goddard Space Flight Center. Enhancements include the super pocket feature which allows concave and convex polygon shapes of up to 40 points including shapes that overlap, that leave islands of material within the pocket, and that have one or more arcs as part of the pocket boundary. Recent modifications to APT include a rework of the POCKET subroutine and correction of an error that prevented the use within a macro of a macro variable cutter move statement combined with macro variable double check surfaces. Former modifications included the expansion of array and buffer sizes to accommodate larger part programs, and the insertion of a few user friendly error messages. The APT system software on the DEC VAX-11/780 is organized into two separate programs: the load complex and the APT processor. The load complex handles the table initiation phase and is usually only run when changes to the

  3. CALIPSO lidar calibration at 532 nm: version 4 nighttime algorithm

    Directory of Open Access Journals (Sweden)

    J. Kar

    2018-03-01

    Full Text Available Data products from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP on board Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO were recently updated following the implementation of new (version 4 calibration algorithms for all of the Level 1 attenuated backscatter measurements. In this work we present the motivation for and the implementation of the version 4 nighttime 532 nm parallel channel calibration. The nighttime 532 nm calibration is the most fundamental calibration of CALIOP data, since all of CALIOP's other radiometric calibration procedures – i.e., the 532 nm daytime calibration and the 1064 nm calibrations during both nighttime and daytime – depend either directly or indirectly on the 532 nm nighttime calibration. The accuracy of the 532 nm nighttime calibration has been significantly improved by raising the molecular normalization altitude from 30–34 km to the upper possible signal acquisition range of 36–39 km to substantially reduce stratospheric aerosol contamination. Due to the greatly reduced molecular number density and consequently reduced signal-to-noise ratio (SNR at these higher altitudes, the signal is now averaged over a larger number of samples using data from multiple adjacent granules. Additionally, an enhanced strategy for filtering the radiation-induced noise from high-energy particles was adopted. Further, the meteorological model used in the earlier versions has been replaced by the improved Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2, model. An aerosol scattering ratio of 1.01 ± 0.01 is now explicitly used for the calibration altitude. These modifications lead to globally revised calibration coefficients which are, on average, 2–3 % lower than in previous data releases. Further, the new calibration procedure is shown to eliminate biases at high altitudes that were present in earlier versions and

  4. 77 FR 25012 - Notice of Intent To Rule on Request To Release Airport Property at the South Texas Regional...

    Science.gov (United States)

    2012-04-26

    ... To Release Airport Property at the South Texas Regional Airport at Hondo (formerly Hondo Municipal... Release Airport Property. SUMMARY: The FAA proposes to rule and invite public comment on the release of.... Ford Aviation Investment Reform Act for the 21st Century (AIR 21). DATES: Comments must be received on...

  5. Radiological effluents released from US continental tests, 1961 through 1992. Revision 1

    International Nuclear Information System (INIS)

    Schoengold, C.R.; DeMarre, M.E.; Kirkwood, E.M.

    1996-08-01

    This report documents all continental tests from September 15, 1961, through September 23, 1992, from which radioactive effluents were released. The report includes both updated information previously published in the publicly available May, 1990 report, DOE/NV-317, ''Radiological Effluents Released from Announced US Continental Tests 1961 through 1988'', and effluent release information on formerly unannounced tests. General information provided for each test includes the date, time, location, type of test, sponsoring laboratory and/or agency or other sponsor, depth of burial, purpose, yield or yield range, extent of release (onsite only or offsite), and category of release (detonation-time versus post-test operations). Where a test with simultaneous detonations is listed, location, depth of burial and yield information are given for each detonation if applicable, as well as the specific source of the release. A summary of each release incident by type of release is included. For a detonation-time release, the effluent curies are expressed at R+12 hours. For a controlled releases from tunnel-tests, the effluent curies are expressed at both time of release and at R+12 hours. All other types are listed at the time of the release. In addition, a qualitative statement of the isotopes in the effluent is included for detonation-time and controlled releases and a quantitative listing is included for all other types. Offsite release information includes the cloud direction, the maximum activity detected in the air offsite, the maximum gamma exposure rate detected offsite, the maximum iodine level detected offsite, and the maximum distance radiation was detected offsite. A release summary incudes whatever other pertinent information is available for each release incident. This document includes effluent release information for 433 tests, some of which have simultaneous detonations. However, only 52 of these are designated as having offsite releases

  6. Radiological effluents released from US continental tests, 1961 through 1992. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Schoengold, C.R.; DeMarre, M.E.; Kirkwood, E.M.

    1996-08-01

    This report documents all continental tests from September 15, 1961, through September 23, 1992, from which radioactive effluents were released. The report includes both updated information previously published in the publicly available May, 1990 report, DOE/NV-317, ``Radiological Effluents Released from Announced US Continental Tests 1961 through 1988``, and effluent release information on formerly unannounced tests. General information provided for each test includes the date, time, location, type of test, sponsoring laboratory and/or agency or other sponsor, depth of burial, purpose, yield or yield range, extent of release (onsite only or offsite), and category of release (detonation-time versus post-test operations). Where a test with simultaneous detonations is listed, location, depth of burial and yield information are given for each detonation if applicable, as well as the specific source of the release. A summary of each release incident by type of release is included. For a detonation-time release, the effluent curies are expressed at R+12 hours. For a controlled releases from tunnel-tests, the effluent curies are expressed at both time of release and at R+12 hours. All other types are listed at the time of the release. In addition, a qualitative statement of the isotopes in the effluent is included for detonation-time and controlled releases and a quantitative listing is included for all other types. Offsite release information includes the cloud direction, the maximum activity detected in the air offsite, the maximum gamma exposure rate detected offsite, the maximum iodine level detected offsite, and the maximum distance radiation was detected offsite. A release summary incudes whatever other pertinent information is available for each release incident. This document includes effluent release information for 433 tests, some of which have simultaneous detonations. However, only 52 of these are designated as having offsite releases.

  7. Birth control - slow release methods

    Science.gov (United States)

    Contraception - slow-release hormonal methods; Progestin implants; Progestin injections; Skin patch; Vaginal ring ... might want to consider a different birth control method. SKIN PATCH The skin patch is placed on ...

  8. DEVELOPMENT OF SUSTAINED RELEASE TABLETS ...

    African Journals Online (AJOL)

    2013-12-31

    Dec 31, 2013 ... The SR dosage forms that release drugs pH independently in .... were determined; Post compression parameters such as weight variation test, hardness, ... Based on the ICH guidelines 12, the stability studies were carried out ...

  9. An accuracy assessment of the CALIOP/CALIPSO version 2/version 3 daytime aerosol extinction product based on a detailed multi-sensor, multi-platform case study

    Directory of Open Access Journals (Sweden)

    M. Kacenelenbogen

    2011-04-01

    Full Text Available The Cloud Aerosol LIdar with Orthogonal Polarization (CALIOP, on board the CALIPSO platform, has measured profiles of total attenuated backscatter coefficient (level 1 products since June 2006. CALIOP's level 2 products, such as the aerosol backscatter and extinction coefficient profiles, are retrieved using a complex succession of automated algorithms. The goal of this study is to help identify potential shortcomings in the CALIOP version 2 level 2 aerosol extinction product and to illustrate some of the motivation for the changes that have been introduced in the next version of CALIOP data (version 3, released in June 2010. To help illustrate the potential factors contributing to the uncertainty of the CALIOP aerosol extinction retrieval, we focus on a one-day, multi-instrument, multiplatform comparison study during the CALIPSO and Twilight Zone (CATZ validation campaign on 4 August 2007. On that day, we observe a consistency in the Aerosol Optical Depth (AOD values recorded by four different instruments (i.e. space-borne MODerate Imaging Spectroradiometer, MODIS: 0.67 and POLarization and Directionality of Earth's Reflectances, POLDER: 0.58, airborne High Spectral Resolution Lidar, HSRL: 0.52 and ground-based AErosol RObotic NETwork, AERONET: 0.48 to 0.73 while CALIOP AOD is a factor of two lower (0.32 at 532 nm. This case study illustrates the following potential sources of uncertainty in the CALIOP AOD: (i CALIOP's low signal-to-noise ratio (SNR leading to the misclassification and/or lack of aerosol layer identification, especially close to the Earth's surface; (ii the cloud contamination of CALIOP version 2 aerosol backscatter and extinction profiles; (iii potentially erroneous assumptions of the aerosol extinction-to-backscatter ratio (Sa used in CALIOP's extinction retrievals; and (iv calibration coefficient biases in the CALIOP daytime attenuated backscatter coefficient profiles. The use of version 3 CALIOP extinction

  10. PCDD/PCDF release inventories

    Energy Technology Data Exchange (ETDEWEB)

    Fiedler, H. [UNEP Chemicals, Chatelaine (Switzerland)

    2004-09-15

    The Stockholm Convention on Persistent Organic Pollutants (POPs) entered into force on 17 May 2004 with 50 Parties. In May 2004, 59 countries had ratified or acceded the Convention. The objective of the Convention is ''to protect human health and the environment from persistent organic pollutants''. For intentionally produced POPs, e.g., pesticides and industrial chemicals such as hexachlorobenzene and polychlorinated biphenyls, this will be achieved by stop of production and use. For unintentionally generated POPs, such as polychlorinated dibenzo-pdioxins (PCDD) and polychlorinated dibenzofurans (PCDF), measures have to be taken to ''reduce the total releases derived from anthropogenic sources''; the final goal is ultimate elimination, where feasible. Under the Convention, Parties have to establish and maintain release inventories to prove the continuous release reduction. Since many countries do not have the technical and financial capacity to measure all releases from all potential PCDD/PCDF sources, UNEP Chemicals has developed the ''Standardized Toolkit for the Identification of Quantification of Dioxin and Furan Releases'' (''Toolkit'' for short), a methodology to estimate annual releases from a number of sources. With this methodology, annual releases can be estimated by multiplying process-specific default emission factors provided in the Toolkit with national activity data. At the seventh session of the Intergovernmental Negotiating Committee, the Toolkit was recommended to be used by countries when reporting national release data to the Conference of the Parties. The Toolkit is especially used by developing countries and countries with economies in transition where no measured data are available. Results from Uruguay, Thailand, Jordan, Philippines, and Brunei Darussalam have been published.

  11. RASCAL Version 2.0 workbook

    International Nuclear Information System (INIS)

    Athey, G.F.; McKenna, T.J.

    1993-05-01

    The Radiological Assessment System for Consequence Analysis, Version 2.0 (RASCAL 2.0) has been developed for use by the NRC personnel who respond to radiological emergencies. This workbook is intended to complement the RASCAL 2.0 User's Guide (NUREG/CR-5247, Vol. 1). The workbook contains exercises designed to familiarize the user with the computer based tools of RASCAL through hands-on problem solving. The workbook is composed of four major sections. The first part is a RASCAL familiarization exercise to acquaint the user with the operation of the forms, menus, on-line help, and documentation. The latter three parts contain exercises in using the three tools of RASCAL Version 2.0: DECAY, FM-DOSE, and ST-DOSE. Each section of exercises is followed by discussion on how the tools could be used to solve the problem

  12. HECTR Version 1.5 user's manual

    International Nuclear Information System (INIS)

    Dingman, S.E.; Camp, A.L.; Wong, C.C.; King, D.B.; Gasser, R.D.

    1986-04-01

    This report describes the use and features of HECTR Version 1.5. HECTR is a relatively fast-running, lumped-volume containment analysis computer program that is most useful for performing parametric studies. The main purpose of HECTR is to analyze nuclear reactor accidents involving the transport and combustion of hydrogen, but HECTR can also function as an experiment analysis tool and can solve a limited set of other types of containment problems. New models added to HECTR Version 1.5 include fan coolers, containment leakage, continuous burning, and the capability to treat carbon monoxide and carbon dioxide. Models for the ice condenser, sumps, and Mark III suppression pool were upgraded. HECTR is designed for flexibility and provides for user control of many important parameters, particularly those related to hydrogen combustion. Built-in correlations and default values of key parameters are also provided

  13. Kernel versions of some orthogonal transformations

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    Kernel versions of orthogonal transformations such as principal components are based on a dual formulation also termed Q-mode analysis in which the data enter into the analysis via inner products in the Gram matrix only. In the kernel version the inner products of the original data are replaced...... by inner products between nonlinear mappings into higher dimensional feature space. Via kernel substitution also known as the kernel trick these inner products between the mappings are in turn replaced by a kernel function and all quantities needed in the analysis are expressed in terms of this kernel...... function. This means that we need not know the nonlinear mappings explicitly. Kernel principal component analysis (PCA) and kernel minimum noise fraction (MNF) analyses handle nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function...

  14. User Manual for the NASA Glenn Ice Accretion Code LEWICE. Version 2.2.2

    Science.gov (United States)

    Wright, William B.

    2002-01-01

    A research project is underway at NASA Glenn to produce a computer code which can accurately predict ice growth under a wide range of meteorological conditions for any aircraft surface. This report will present a description of the code inputs and outputs from version 2.2.2 of this code, which is called LEWICE. This version differs from release 2.0 due to the addition of advanced thermal analysis capabilities for de-icing and anti-icing applications using electrothermal heaters or bleed air applications. An extensive effort was also undertaken to compare the results against the database of electrothermal results which have been generated in the NASA Glenn Icing Research Tunnel (IRT) as was performed for the validation effort for version 2.0. This report will primarily describe the features of the software related to the use of the program. Appendix A of this report has been included to list some of the inner workings of the software or the physical models used. This information is also available in the form of several unpublished documents internal to NASA. This report is intended as a replacement for all previous user manuals of LEWICE. In addition to describing the changes and improvements made for this version, information from previous manuals may be duplicated so that the user will not need to consult previous manuals to use this code.

  15. Integrated Reliability and Risk Analysis System (IRRAS), Version 2.5: Reference manual

    International Nuclear Information System (INIS)

    Russell, K.D.; McKay, M.K.; Sattison, M.B.; Skinner, N.L.; Wood, S.T.; Rasmuson, D.M.

    1991-03-01

    The Integrated Reliability and Risk Analysis System (IRRAS) is a state-of-the-art, microcomputer-based probabilistic risk assessment (PRA) model development and analysis tool to address key nuclear plant safety issues. IRRAS is an integrated software tool that gives the user the ability to create and analyze fault trees and accident sequences using a microcomputer. This program provides functions that range from graphical fault tree construction to cut set generation and quantification. Version 1.0 of the IRRAS program was released in February of 1987. Since that time, many user comments and enhancements have been incorporated into the program providing a much more powerful and user-friendly system. This version has been designated IRRAS 2.5 and is the subject of this Reference Manual. Version 2.5 of IRRAS provides the same capabilities as Version 1.0 and adds a relational data base facility for managing the data, improved functionality, and improved algorithm performance. 7 refs., 348 figs

  16. Integrated Reliability and Risk Analysis System (IRRAS) Version 2.0 user's guide

    International Nuclear Information System (INIS)

    Russell, K.D.; Sattison, M.B.; Rasmuson, D.M.

    1990-06-01

    The Integrated Reliability and Risk Analysis System (IRRAS) is a state-of-the-art, microcomputer-based probabilistic risk assessment (PRA) model development and analysis tool to address key nuclear plant safety issues. IRRAS is an integrated software tool that gives the user the ability to create and analyze fault trees and accident sequences using a microcomputer. This program provides functions that range from graphical fault tree construction to cut set generation and quantification. Also provided in the system is an integrated full-screen editor for use when interfacing with remote mainframe computer systems. Version 1.0 of the IRRAS program was released in February of 1987. Since that time, many user comments and enhancements have been incorporated into the program providing a much more powerful and user-friendly system. This version has been designated IRRAS 2.0 and is the subject of this user's guide. Version 2.0 of IRRAS provides all of the same capabilities as Version 1.0 and adds a relational data base facility for managing the data, improved functionality, and improved algorithm performance. 9 refs., 292 figs., 4 tabs

  17. The Gaia Framework: Version Support In Web Based Open Hypermedia

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Kejser, Thomas

    2004-01-01

    The GAIA framework prototype, described herein, explores the possibilities and problems that arise when combining versioning and open hypermedia paradigms. It will be argued that it - by adding versioning as a separate service in the hypermedia architecture – is possible to build consistent...... versioning field and GAIA is compared with previous attempts at defining hypermedia versioning frameworks. GAIA is capable of multi-level versioning and versioning of structures and supports freezing mechanisms for both documents and hyperstructure. The experiences from GAIA provide an input to new reference...

  18. The Gaia Framework: Version Support In Web Based Open Hypermedia

    DEFF Research Database (Denmark)

    Kejser, Thomas; Grønbæk, Kaj

    2003-01-01

    The GAIA framework prototype, described herein, explores the possibilities and problems that arise when combining versioning and open hypermedia paradigms. It will be argued that it - by adding versioning as a separate service in the hypermedia architecture - is possible to build consistent...... versioning field and GAIA is compared with previous attempts at defining hypermedia versioning frameworks. GAIA is capable of multi-level versioning and versioning of structures and supports freezing mechanisms for both documents and hyperstructure. The experiences from GAIA provide an input to new reference...

  19. MESOI Version 2.0: an interactive mesoscale Lagrangian puff dispersion model with deposition and decay

    International Nuclear Information System (INIS)

    Ramsdell, J.V.; Athey, G.F.; Glantz, C.S.

    1983-11-01

    MESOI Version 2.0 is an interactive Lagrangian puff model for estimating the transport, diffusion, deposition and decay of effluents released to the atmosphere. The model is capable of treating simultaneous releases from as many as four release points, which may be elevated or at ground-level. The puffs are advected by a horizontal wind field that is defined in three dimensions. The wind field may be adjusted for expected topographic effects. The concentration distribution within the puffs is initially assumed to be Gaussian in the horizontal and vertical. However, the vertical concentration distribution is modified by assuming reflection at the ground and the top of the atmospheric mixing layer. Material is deposited on the surface using a source depletion, dry deposition model and a washout coefficient model. The model also treats the decay of a primary effluent species and the ingrowth and decay of a single daughter species using a first order decay process. This report is divided into two parts. The first part discusses the theoretical and mathematical bases upon which MESOI Version 2.0 is based. The second part contains the MESOI computer code. The programs were written in the ANSI standard FORTRAN 77 and were developed on a VAX 11/780 computer. 43 references, 14 figures, 13 tables

  20. PC 386-based version of DORT

    International Nuclear Information System (INIS)

    Tanker, E.

    1992-01-01

    Problems encountered during the adaptation of DORT on a personal computer using a Fortran77 compiler are described, modifications done to solve these are explained. Three test cases were run with the modified version and results are compared with those obtained on an IBM 3090/200. Numerical differences were observed in the last three decimal digits of the computations at most. The running times on the PC were found to be satisfactory for these test cases

  1. UGV Control Interoperability Profile (IOP), Version 0

    Science.gov (United States)

    2011-12-21

    a tracked vehicle to climb stairs , traverse ditches/ruts, etc. The operator should be able to control the position of the flippers via the OCU and...Unclassified UGV Control Interoperability Profile (IOP) Version 0 Robotic Systems, Joint Project Office (RS JPO) SFAE-GCS-UGV MS...NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Robotic Systems, Joint Project Office (RS JPO),SFAE-GCS-UGV MS 266,6501 East 11 Mile Road

  2. The release code package REVOLS/RENONS for fission product release from a liquid sodium pool into an inert gas atmosphere

    International Nuclear Information System (INIS)

    Starflinger, J.; Scholtyssek, W.; Unger, H.

    1994-12-01

    For aerosol source term considerations in the field of nuclear safety, the investigation of the release of volatile and non-volatile species from liquid surfaces into a gas atmosphere is important. In case of a hypothetical liquid metal fast breeder reactor accident with tank failure, primary coolant sodium with suspended or solved fuel particles and fission products may be released into the containment. The computer code package REVOLS/RENONS, based on a theoretical mechanistic model with a modular structure, has been developed for the prediction of sodium release as well as volatile and non-volatile radionuclide release from a liquid pool surface into the inert gas atmosphere of the inner containment. Hereby the release of sodium and volatile fission products, like cesium and sodium iodide, is calculated using a theoretical model in a mass transfer coefficient formulation. This model has been transposed into the code version REVOLS.MOD1.1, which is discussed here. It enables parameter analysis under highly variable user-defined boundary conditions. Whereas the evaporative release of the volatile components is governed by diffusive and convective transport processes, the release of the non-volatile ones may be governed by mechanical processes which lead to droplet entrainment from the wavy pool surface under conditions of natural or forced convection into the atmosphere. The mechanistic model calculates the liquid entrainment rate of the non-volatile species, like the fission product strontium oxide and the fuel (uranium dioxide) from a liquid pool surface into a parallel gas flow. The mechanistic model has been transposed into the computer code package REVOLS/RENONS, which is discussed here. Hereby the module REVOLS (RElease of VOLatile Species) calculates the evaporative release of the volatile species, while the module RENONS (RElease of NON-Volatile Species) computes the entrainment release of the non-volatile radionuclides. (orig./HP) [de

  3. Nuclear power plants and the environment. Water samplings and releases

    International Nuclear Information System (INIS)

    Hartmann, Philippe; Bordet, Francois; Chevalier, Christian; Colin, Jean-Luc; Khalanski, Michel

    2013-01-01

    This voluminous and illustrated guide aims at giving detailed information on the nature of waters used by nuclear power plants and of releases, on how these samplings and controls are performed, on the associated risks for the environment and public health, and on how public is informed. After a general overview of these issues, a chapter addresses the protection of nature and biodiversity and the actions performed by EDF in this respect. The next chapter deals with public information. The next chapters discuss the water needs of a nuclear power plant, effluent releases and their impacts. Two chapters are dedicated to the monitoring and control of the environment, and to the various techniques of environmental metrology. Legal and regulatory aspects are then presented

  4. Tocolysis in term breech external cephalic version.

    Science.gov (United States)

    Nor Azlin, M I; Haliza, H; Mahdy, Z A; Anson, I; Fahya, M N; Jamil, M A

    2005-01-01

    To study the effect of ritodrine tocolysis on the success of external cephalic version (ECV) and to assess the role of ECV in breech presentation at our centre. A prospective randomized double-blind-controlled trial comparing ritodrine and placebo in ECV of singleton term breech pregnancy at a tertiary hospital. Among the 60 patients who were recruited, there was a success rate of 36.7%. Ritodrine tocolysis significantly improved the success rate of ECV (50% vs. 23%; P=0.032). There was a marked effect of ritodrine tocolysis on the ECV success in nulliparae (36.4% vs. 13.0%) and multiparae (87.5% vs. 57.1%). External cephalic version has shown to reduce the rate of cesarean section for breech presentation by 33.5% in our unit. External cephalic version significantly reduced the rate of cesarean section in breech presentation, and ritodrine tocolysis improved the success of ECV and should be offered to both nulliparous and parous women in the case of term breech presentation.

  5. Mission Data System Java Edition Version 7

    Science.gov (United States)

    Reinholtz, William K.; Wagner, David A.

    2013-01-01

    The Mission Data System framework defines closed-loop control system abstractions from State Analysis including interfaces for state variables, goals, estimators, and controllers that can be adapted to implement a goal-oriented control system. The framework further provides an execution environment that includes a goal scheduler, execution engine, and fault monitor that support the expression of goal network activity plans. Using these frameworks, adapters can build a goal-oriented control system where activity coordination is verified before execution begins (plan time), and continually during execution. Plan failures including violations of safety constraints expressed in the plan can be handled through automatic re-planning. This version optimizes a number of key interfaces and features to minimize dependencies, performance overhead, and improve reliability. Fault diagnosis and real-time projection capabilities are incorporated. This version enhances earlier versions primarily through optimizations and quality improvements that raise the technology readiness level. Goals explicitly constrain system states over explicit time intervals to eliminate ambiguity about intent, as compared to command-oriented control that only implies persistent intent until another command is sent. A goal network scheduling and verification process ensures that all goals in the plan are achievable before starting execution. Goal failures at runtime can be detected (including predicted failures) and handled by adapted response logic. Responses can include plan repairs (try an alternate tactic to achieve the same goal), goal shedding, ignoring the fault, cancelling the plan, or safing the system.

  6. Condiment: general synthesis of different versions

    International Nuclear Information System (INIS)

    Mangin, J.P.

    1990-01-01

    CONDIMENT is a code for the computation of ion migration and diffusion in areas close to radwaste storage facilities. This type of application was found to require a mesh pattern and boundary conditions different from the usual, which justifies the writing of a new code. A first version (version 2) only convers the migration of a single, non radioactive ion. The discretization, the selection of an implicit scheme, and the various boundary conditions are described. Physical quantities such as diffusion coefficient, porosity, retardation factor and permeability vary in space but not in time. A first extension consists of taking consideration radioactivity and filiation. Discretization with respect to time is modified, and a check performed on the original analytical solutions. In a second extension, consideration is given to non-linear adsorption, which makes it necessary to use the NEWTON-RAPHSON method. One can thus modelize the FREUNDLICH isotherms, in spite of the singular point at the origin. Diffusion, apparent porosity and permeability values can be changed as computed proceeds. The last extension is the introduction of two ions with the formation of precipitate. The formulation is derived from that used for non-linear adsorption, the precipitate playing a part similar to that of adsorbed concentration. Agreement with the original analytical solutions is verified. The case of migration with several interacting ions is approached from the theoretical standpoint. We described the discretization, which is similar to that in the first version, but involves many additional variables. Numerical stability is shown to be unconditional [fr

  7. Overview of MPLNET Version 3 Cloud Detection

    Science.gov (United States)

    Lewis, Jasper R.; Campbell, James; Welton, Ellsworth J.; Stewart, Sebastian A.; Haftings, Phillip

    2016-01-01

    The National Aeronautics and Space Administration Micro Pulse Lidar Network, version 3, cloud detection algorithm is described and differences relative to the previous version are highlighted. Clouds are identified from normalized level 1 signal profiles using two complementary methods. The first method considers vertical signal derivatives for detecting low-level clouds. The second method, which detects high-level clouds like cirrus, is based on signal uncertainties necessitated by the relatively low signal-to-noise ratio exhibited in the upper troposphere by eye-safe network instruments, especially during daytime. Furthermore, a multitemporal averaging scheme is used to improve cloud detection under conditions of a weak signal-to-noise ratio. Diurnal and seasonal cycles of cloud occurrence frequency based on one year of measurements at the Goddard Space Flight Center (Greenbelt, Maryland) site are compared for the new and previous versions. The largest differences, and perceived improvement, in detection occurs for high clouds (above 5 km, above MSL), which increase in occurrence by over 5%. There is also an increase in the detection of multilayered cloud profiles from 9% to 19%. Macrophysical properties and estimates of cloud optical depth are presented for a transparent cirrus dataset. However, the limit to which the cirrus cloud optical depth could be reliably estimated occurs between 0.5 and 0.8. A comparison using collocated CALIPSO measurements at the Goddard Space Flight Center and Singapore Micro Pulse Lidar Network (MPLNET) sites indicates improvements in cloud occurrence frequencies and layer heights.

  8. Academic Publications

    OpenAIRE

    Francisco H C Felix

    2017-01-01

    Alternative modes of academic publication. What it is: Page for the dissemination of academic papers in alternative formats. Aimed at the diffusion of the idea of open publication, or open access publication, a branch of open science, a multidisciplinary movement that seeks to modify the paradigm of knowledge production that centralizes it and prevents its spreading. Historically, Western tradition has become firmly rooted in the free dissemination of knowledge among peers. However, the c...

  9. Public transport

    OpenAIRE

    Lethbridge, Jane

    2008-01-01

    Public transport plays an essential role in enabling people from low income and other disadvantaged groups to access employment and services. It also contributes to the development of social networks and social capital, by helping people to visit friends and relatives and take part in community and other social activities. Public policy makers have begun to recognise that adequate public transport provision can play an important role in reducing social exclusion. [Taken from introductory para...

  10. Original article Validation of the Polish version of the Collective Self-Esteem Scale

    Directory of Open Access Journals (Sweden)

    Róża Bazińska

    2015-07-01

    Full Text Available Background The aim of this article is to present research on the validity and reliability of the Collective Self-Esteem Scale (CSES for the Polish population. The CSES is a measure of individual differences in collective self-esteem, understood as the global evaluation of one’s own social (collective identity. Participants and procedure Participants from two samples (n = 466 and n = 1,009 completed a paper-pencil set of questionnaires which contained the CSES and the Rosenberg Self-Esteem Scale (RSES, and subsets of participants completed scales related to a sense of belonging, well-being and psychological distress (anxiety and depression. Results Like the original version, the Polish version of the CSES comprises 16 items which form the four dimensions of collective self-esteem: Public collective self-esteem, Private collective self-esteem, Membership esteem and Importance of Identity. The results confirm the four-factor structure of the Polish version of the CSES, support the whole Polish version of the CSES as well as its subscales, which represent satisfactory reliability and stability, and provide initial evidence of construct validity. Conclusions As the results of the study indicate, the Polish version of the CSES is a valid and reliable self-report measure for assessing the global self-esteem derived from membership of a group and has proved to be useful in the Polish context.

  11. Hydraulic running and release tool with mechanical emergency release

    International Nuclear Information System (INIS)

    Baker, S.F.

    1991-01-01

    This patent describes a setting tool for connection in a well string to position a tubular member in a well bore. It comprises: a mandrel adapted to be connected to the well string; an outer sleeve surrounding the mandrel and releasably secured thereto; a latch nut releasably connected to the outer sleeve; piston means sealingly engaging the mandrel; shear means releasably securing the piston to the latch nut to maintain the latch nut releasably connected to the tubular member; the mandrel having port means for conducting fluid pressure from the well string to release the piston means from and the latch nut; cooperating engageable surfaces on the piston and latch nut to reengage them together after the piston moves a predetermined longitudinal distance relative to the latch nut; and additional cooperating engageable surfaces on the latch nut and the outer sleeve which are engageable when the piston and engaged latch nut are moved a predetermined additional longitudinal distance by fluid pressure to secure the engaged piston and latch nut with the outer sleeve for retrieval along with the mandrel from the well bore

  12. Provenance tracking for scientific software toolchains through on-demand release and archiving

    Science.gov (United States)

    Ham, David

    2017-04-01

    There is an emerging consensus that published computational science results must be backed by a provenance chain tying results to the exact versions of input data and the code which generated them. There is also now an impressive range of web services devoted to revision control of software, and the archiving in citeable form of both software and input data. However, much scientific software itself builds on libraries and toolkits, and these themselves have dependencies. Further, it is common for cutting edge research to depend on the latest version of software in online repositories, rather than the official release version. This creates a situation in which an author who wishes to follow best practice in recording the provenance chain of their results must archive and cite unreleased versions of a series of dependencies. Here, we present an alternative which toolkit authors can easily implement to provide a semi-automatic mechanism for creating and archiving custom software releases of the precise version of a package used in a particular simulation. This approach leverages the excellent services provided by GitHub and Zenodo to generate a connected set of citeable DOIs for the archived software. We present the integration of this workflow into the Firedrake automated finite element framework as a practical example of this approach in use on a complex geoscientific tool chain in practical use.

  13. Bullying Prevention for Public Health Practitioners

    Centers for Disease Control (CDC) Podcasts

    2012-01-19

    This podcast discusses bullying as a public health problem, and provides information and resources for public health practitioners.  Created: 1/19/2012 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 1/19/2012.

  14. Pig genome sequence - analysis and publication strategy

    DEFF Research Database (Denmark)

    Archibald, Alan L.; Bolund, Lars; Churcher, Carol

    2010-01-01

    preferentially selected for sequencing. In accordance with the Bermuda and Fort Lauderdale agreements and the more recent Toronto Statement the data have been released into public sequence repositories (Genbank/EMBL, NCBI/Ensembl trace repositories) in a timely manner and in advance of publication. CONCLUSIONS...

  15. A new version of transfer matrix method for multibody systems

    Energy Technology Data Exchange (ETDEWEB)

    Rui, Xiaoting, E-mail: ruixt@163.net [Nanjing University of Science and Technology, Institute of Launch Dynamics (China); Bestle, Dieter, E-mail: bestle@b-tu.de [Brandenburg University of Technology, Engineering Mechanics and Vehicle Dynamics (Germany); Zhang, Jianshu, E-mail: zhangdracpa@sina.com; Zhou, Qinbo, E-mail: zqb912-new@163.com [Nanjing University of Science and Technology, Institute of Launch Dynamics (China)

    2016-10-15

    In order to avoid the global dynamics equations and increase the computational efficiency for multibody system dynamics (MSD), the transfer matrix method of multibody system (MSTMM) has been developed and applied very widely in research and engineering in recent 20 years. It differs from ordinary methods in multibody system dynamics with respect to the feature that there is no need for a global dynamics equation, and it uses low-order matrices for high computational efficiency. For linear systems, MSTMM is exact even if continuous elements like beams are involved. The discrete time MSTMM, however, has to use local linearization. In order to release the method from such approximations, a new version of MSTMM is presented in this paper where translational and angular accelerations, on the one hand, and internal forces and moments, on the other hand, are used as state variables. Already linear relationships among these quantities are utilized, which results in new element transfer matrices and algorithms making the study of multibody systems as simple as the study of single bodies. The proposed approach also allows combining MSTMM with any general numerical integration procedure. Some numerical examples of MSD are given to demonstrate the proposed method.

  16. Reliability and validity of the Japanese version of the Resilience Scale and its short version

    Directory of Open Access Journals (Sweden)

    Kondo Maki

    2010-11-01

    Full Text Available Abstract Background The clinical relevance of resilience has received considerable attention in recent years. The aim of this study is to demonstrate the reliability and validity of the Japanese version of the Resilience Scale (RS and short version of the RS (RS-14. Findings The original English version of RS was translated to Japanese and the Japanese version was confirmed by back-translation. Participants were 430 nursing and university psychology students. The RS, Center for Epidemiologic Studies Depression Scale (CES-D, Rosenberg Self-Esteem Scale (RSES, Social Support Questionnaire (SSQ, Perceived Stress Scale (PSS, and Sheehan Disability Scale (SDS were administered. Internal consistency, convergent validity and factor loadings were assessed at initial assessment. Test-retest reliability was assessed using data collected from 107 students at 3 months after baseline. Mean score on the RS was 111.19. Cronbach's alpha coefficients for the RS and RS-14 were 0.90 and 0.88, respectively. The test-retest correlation coefficients for the RS and RS-14 were 0.83 and 0.84, respectively. Both the RS and RS-14 were negatively correlated with the CES-D and SDS, and positively correlated with the RSES, SSQ and PSS (all p Conclusions This study demonstrates that the Japanese version of RS has psychometric properties with high degrees of internal consistency, high test-retest reliability, and relatively low concurrent validity. RS-14 was equivalent to the RS in internal consistency, test-retest reliability, and concurrent validity. Low scores on the RS, a positive correlation between the RS and perceived stress, and a relatively low correlation between the RS and depressive symptoms in this study suggest that validity of the Japanese version of the RS might be relatively low compared with the original English version.

  17. DOE-2 sample run book: Version 2.1E

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, F.C.; Birdsall, B.E.; Buhl, W.F.; Ellington, K.L.; Erdem, A.E. [Lawrence Berkeley Lab., CA (United States); Hirsch, J.J.; Gates, S. [Hirsch (James J.) and Associates, Camarillo, CA (United States)

    1993-11-01

    The DOE-2 Sample Run Book shows inputs and outputs for a variety of building and system types. The samples start with a simple structure and continue to a high-rise office building, a medical building, three small office buildings, a bar/lounge, a single-family residence, a small office building with daylighting, a single family residence with an attached sunspace, a ``parameterized`` building using input macros, and a metric input/output example. All of the samples use Chicago TRY weather. The main purpose of the Sample Run Book is instructional. It shows the relationship of LOADS-SYSTEMS-PLANT-ECONOMICS inputs, displays various input styles, and illustrates many of the basic and advanced features of the program. Many of the sample runs are preceded by a sketch of the building showing its general appearance and the zoning used in the input. In some cases we also show a 3-D rendering of the building as produced by the program DrawBDL. Descriptive material has been added as comments in the input itself. We find that a number of users have loaded these samples onto their editing systems and use them as ``templates`` for creating new inputs. Another way of using them would be to store various portions as files that can be read into the input using the {number_sign}{number_sign} include command, which is part of the Input Macro feature introduced in version DOE-2.lD. Note that the energy rate structures here are the same as in the DOE-2.lD samples, but have been rewritten using the new DOE-2.lE commands and keywords for ECONOMICS. The samples contained in this report are the same as those found on the DOE-2 release files. However, the output numbers that appear here may differ slightly from those obtained from the release files. The output on the release files can be used as a check set to compare results on your computer.

  18. Toxic Release Inventory (TRI) Facility Points, Region 9, 2012, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) gives the public the right to know about toxic chemicals being released into the...

  19. Toxic Release Inventory (TRI) Facility Points, Region 9, 2014, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) gives the public the right to know about toxic chemicals being released into the...

  20. Toxic Release Inventory (TRI) Facility Points, Region 9, 2011, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) gives the public the right to know about toxic chemicals being released into the...

  1. Equations for estimating stand establishment, release, and thinning costs in the Lake States.

    Science.gov (United States)

    Jeffrey T. Olson; Allen L. Lundgren; Dietmar Rose

    1978-01-01

    Equations for estimating project costs for certain silvicultural treatments in the Lake States have been developed from project records of public forests. Treatments include machine site preparation, hand planting, aerial spraying, prescribed burning, manual release, and thinning.

  2. Tritium transport calculations for the IFMIF Tritium Release Test Module

    Energy Technology Data Exchange (ETDEWEB)

    Freund, Jana, E-mail: jana.freund@kit.edu; Arbeiter, Frederik; Abou-Sena, Ali; Franza, Fabrizio; Kondo, Keitaro

    2014-10-15

    Highlights: • Delivery of material data for the tritium balance in the IFMIF Tritium Release Test Module. • Description of the topological models in TMAP and the adapted fusion-devoted Tritium Permeation Code (FUS-TPC). • Computation of release of tritium from the breeder solid material into the purge gas. • Computation of the loss of tritium over the capsule wall, rig hull, container wall and purge gas return line. - Abstract: The IFMIF Tritium Release Test Module (TRTM) is projected to measure online the tritium release from breeder ceramics and beryllium pebble beds under high energy neutron irradiation. Tritium produced in the pebble bed of TRTM is swept out continuously by a purge gas flow, but can also permeate into the module's metal structures, and can be lost by permeation to the environment. According analyses on the tritium inventory are performed to support IFMIF plant safety studies, and to support the experiment planning. This paper describes the necessary elements for calculation of the tritium transport in the Tritium Release Test Module as follows: (i) applied equations for the tritium balance, (ii) material data from literature and (iii) the topological models and the computation of the five different cases; namely release of tritium from the breeder solid material into the purge gas, loss of tritium over the capsule wall, rig hull, container wall and purge gas return line in detail. The problem of tritium transport in the TRTM has been studied and analyzed by the Tritium Migration Analysis Program (TMAP) and the adapted fusion-devoted Tritium Permeation Code (FUS-TPC). TMAP has been developed at INEEL and now exists in Version 7. FUS-TPC Code was written in MATLAB with the original purpose to study the tritium transport in Helium Cooled Lead Lithium (HCLL) blanket and in a later version the Helium Cooled Pebble Bed (HCPB) blanket by [6] (Franza, 2012). This code has been further modified to be applicable to the TRTM. Results from the

  3. Tritium transport calculations for the IFMIF Tritium Release Test Module

    International Nuclear Information System (INIS)

    Freund, Jana; Arbeiter, Frederik; Abou-Sena, Ali; Franza, Fabrizio; Kondo, Keitaro

    2014-01-01

    Highlights: • Delivery of material data for the tritium balance in the IFMIF Tritium Release Test Module. • Description of the topological models in TMAP and the adapted fusion-devoted Tritium Permeation Code (FUS-TPC). • Computation of release of tritium from the breeder solid material into the purge gas. • Computation of the loss of tritium over the capsule wall, rig hull, container wall and purge gas return line. - Abstract: The IFMIF Tritium Release Test Module (TRTM) is projected to measure online the tritium release from breeder ceramics and beryllium pebble beds under high energy neutron irradiation. Tritium produced in the pebble bed of TRTM is swept out continuously by a purge gas flow, but can also permeate into the module's metal structures, and can be lost by permeation to the environment. According analyses on the tritium inventory are performed to support IFMIF plant safety studies, and to support the experiment planning. This paper describes the necessary elements for calculation of the tritium transport in the Tritium Release Test Module as follows: (i) applied equations for the tritium balance, (ii) material data from literature and (iii) the topological models and the computation of the five different cases; namely release of tritium from the breeder solid material into the purge gas, loss of tritium over the capsule wall, rig hull, container wall and purge gas return line in detail. The problem of tritium transport in the TRTM has been studied and analyzed by the Tritium Migration Analysis Program (TMAP) and the adapted fusion-devoted Tritium Permeation Code (FUS-TPC). TMAP has been developed at INEEL and now exists in Version 7. FUS-TPC Code was written in MATLAB with the original purpose to study the tritium transport in Helium Cooled Lead Lithium (HCLL) blanket and in a later version the Helium Cooled Pebble Bed (HCPB) blanket by [6] (Franza, 2012). This code has been further modified to be applicable to the TRTM. Results from the

  4. Public communication of science 2.0

    OpenAIRE

    Peters, Hans Peter; Dunwoody, Sharon; Allgaier, Joachim; Lo, Yin-Yueh; Brossard, Dominique

    2014-01-01

    he communication between scientists and the public is changing. Major drivers of this change are the rapid evolution of the Internet, now in its web 2.0 version with an abundance of video‐sharing websites, blogging platforms and social networks; the ubiquity of mobile devices; and the merging of individual and public communication. The new infrastructures allow nearly instantaneous access to information and make it much easier for communicators—both professionals and laypersons—to directly ad...

  5. Multisectoral studies in Public Health in Ukraine

    OpenAIRE

    Andreeva, Tatiana

    2011-01-01

    The second issue of the TCPHEE contains materials presented at the conference ‘Economics, sociology, theory and practice of public health’ conducted in Kiev on April 12-15, 2011. Conference participants were the faculty, doctoral and master students of the School of Public Health (SPH) at the National University of Kyiv-Mohyla Academy (NaUKMA). Reports were first discussed during the conference and then submitted as conference abstracts for the editorial review. The revised versions were then...

  6. 42 CFR 73.19 - Notification of theft, loss, or release.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Notification of theft, loss, or release. 73.19..., INSPECTION, LICENSING SELECT AGENTS AND TOXINS § 73.19 Notification of theft, loss, or release. (a) Upon discovery of the theft or loss of a select agent or toxin, an individual or entity must immediately notify...

  7. Comparing two versions of the Karolinska Sleepiness Scale (KSS).

    Science.gov (United States)

    Miley, Anna Åkerstedt; Kecklund, Göran; Åkerstedt, Torbjörn

    2016-01-01

    The Karolinska Sleepiness Scale (KSS) is frequently used to study sleepiness in various contexts. However, it exists in two versions, one with labels on every other step (version A), and one with labels on every step (version B) on the 9-point scale. To date, there are no studies examining whether these versions can be used interchangeably. The two versions were here compared in a 24 hr wakefulness study of 12 adults. KSS ratings were obtained every hour, alternating version A and B. Results indicated that the two versions are highly correlated, do not have different response distributions on labeled and unlabeled steps, and that the distributions across all steps have a high level of correspondence (Kappa = 0.73). It was concluded that the two versions are quite similar.

  8. United States Climate Reference Network (USCRN) Processed Data (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  9. Global Historical Climatology Network - Monthly (GHCN-M), Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, the temperature portion of this dataset has been superseded by a newer version. Users should not use this version except in rare cases (e.g., when...

  10. Gridded Species Distribution, Version 1: Global Amphibians Presence Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Amphibians Presence Grids of the Gridded Species Distribution, Version 1 is a reclassified version of the original grids of amphibian species distribution...

  11. Integrated Global Radiosonde Archive (IGRA) - Monthly Means (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  12. Public Transparency

    OpenAIRE

    UNCTAD; World Bank

    2018-01-01

    This note provides guidance on the type of information about agricultural investments that investors and governments can make publicly available. Transparency about certain aspects of investments can improve relations between investors and communities, enable external stakeholders to hold investors to commitments, and improve investors’ public image. Although some information should be kep...

  13. Public relations

    International Nuclear Information System (INIS)

    1998-01-01

    Public relations activities continued in a well-proved form of organizing plant visits and Information Centre off - site activities. Bohunice NPPs were visited by the number of 7294 visitors in 1997. A brief account of activities in public relations carried out by the Nuclear power plants Jaslovske Bohunice in 1997 is presented

  14. Xenotransplantation: science, ethics, and public policy

    National Research Council Canada - National Science Library

    Committee on Xenograft, Transplantation Institute; Institute of Medicine

    ... Division of Health Sciences Policy Division of Health Care Services INSTITUTE OF MEDICINE NATIONAL ACADEMY PRESS Washington, D.C. 1996 Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typesetting-specific created from the as publication files other XML and from this of recomp...

  15. Predicting hydrocarbon release from soil

    International Nuclear Information System (INIS)

    Poppendieck, D.; Loehr, R.C.

    2002-01-01

    'Full text:' The remediation of hazardous chemicals from soils can be a lengthy and costly process. As a result, recent regulatory initiatives have focused on risk-based corrective action (RBCA) approaches. Such approaches attempt to identify the amount of chemical that can be left at a site with contaminated soil and still be protective of human health and the environment. For hydrocarbons in soils to pose risk to human heath and the environment, the hydrocarbons must be released from the soil and accessible to microorganisms, earthworms, or other higher level organisms. The sorption of hydrocarbons to soil can reduce the availability of the hydrocarbon to receptors. Typically in soils and sediments, there is an initial fast release of a hydrocarbon from the soil to the aqueous phase followed by a slower release of the remaining hydrocarbon to the aqueous phase. The rate and extent of slow release can influence aqueous hydrocarbon concentrations and the fate and transport of hydrocarbons in the subsurface. Once the fast fraction of the chemical has been removed from the soil, the remaining fraction of a chemical may desorb at a rate that natural mechanisms can attenuate the released hydrocarbon. Hence, active remediation may be needed only until the fast fraction has been removed. However, the fast fraction is a soil and chemical specific parameter. This presentation will present a tier I type protocol that has been developed to quickly estimate the fraction of hydrocarbons that are readily released from the soil matrix to the aqueous phase. Previous research in our laboratory and elsewhere has used long-term desorption (four months) studies to determine the readily released fraction. This research shows that a single short-term (less than two weeks) batch extraction procedure provides a good estimate of the fast released fraction derived from long-term experiments. This procedure can be used as a tool to rapidly evaluate the release and bioavailability of

  16. Publications of LASL research, 1978

    International Nuclear Information System (INIS)

    Willis, J.K.; Salazar, C.A.

    1980-04-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos Scientific Laboratory for 1978. Papers published in 1978 are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations are also listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted. If a paper was published more than once, all places of publication are included. The bibliography includes Los Alamos Scientific Laboratory reports, papers released as non-LASL reports, journal articles, books, chapters of books, conference papers (whether published separately or as part of conference proceedings issued as books or reports), papers published in congressional hearings, theses, and US patents. Publications by LASL authors that are not records of Laboratory-sponsored work are also included

  17. Publications of LASL research, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Willis, J.K.; Salazar, C.A. (comps.)

    1980-04-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos Scientific Laboratory for 1978. Papers published in 1978 are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations are also listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted. If a paper was published more than once, all places of publication are included. The bibliography includes Los Alamos Scientific Laboratory reports, papers released as non-LASL reports, journal articles, books, chapters of books, conference papers (whether published separately or as part of conference proceedings issued as books or reports), papers published in congressional hearings, theses, and US patents. Publications by LASL authors that are not records of Laboratory-sponsored work are also included.

  18. The Expanded Capabilities Of The Cementitious Barriers Partnership Software Toolbox Version 2.0 - 14331

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Heather; Flach, Greg; Smith, Frank; Langton, Christine; Brown, Kevin; Kosson, David; Samson, Eric; Mallick, Pramod

    2014-01-10

    The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the U.S. Department of Energy (US DOE) Office of Tank Waste Management. The CBP program has developed a set of integrated tools (based on state-of-the-art models and leaching test methods) that help improve understanding and predictions of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The CBP Software Toolbox – “Version 1.0” was released early in FY2013 and was used to support DOE-EM performance assessments in evaluating various degradation mechanisms that included sulfate attack, carbonation and constituent leaching. The sulfate attack analysis predicted the extent and damage that sulfate ingress will have on concrete vaults over extended time (i.e., > 1000 years) and the carbonation analysis provided concrete degradation predictions from rebar corrosion. The new releaseVersion 2.0” includes upgraded carbonation software and a new software module to evaluate degradation due to chloride attack. Also included in the newer version are a dual regime module allowing evaluation of contaminant release in two regimes – both fractured and un-fractured. The integrated software package has also been upgraded with new plotting capabilities and many other features that increase the “user-friendliness” of the package. Experimental work has been generated to provide data to calibrate the models to improve the credibility of the analysis and reduce the uncertainty. Tools selected for and developed under this program have been used to evaluate and predict the behavior of cementitious barriers used in near-surface engineered waste disposal systems for periods of performance up to or longer than 100 years for operating facilities and longer than 1000 years for waste disposal. The CBP Software Toolbox is and will continue to produce tangible benefits to the working DOE

  19. GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (VAX VMS VERSION)

    Science.gov (United States)

    Des, Jardins M. L.

    1994-01-01

    regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

  20. GEWEX SRB Shortwave Release 4

    Science.gov (United States)

    Cox, S. J.; Stackhouse, P. W., Jr.; Mikovitz, J. C.; Zhang, T.

    2017-12-01

    The NASA/GEWEX Surface Radiation Budget (SRB) project produces shortwave and longwave surface and top of atmosphere radiative fluxes for the 1983-near present time period. Spatial resolution is 1 degree. The new Release 4 uses the newly processed ISCCP HXS product as its primary input for cloud and radiance data. The ninefold increase in pixel number compared to the previous ISCCP DX allows finer gradations in cloud fraction in each grid box. It will also allow higher spatial resolutions (0.5 degree) in future releases. In addition to the input data improvements, several important algorithm improvements have been made since Release 3. These include recalculated atmospheric transmissivities and reflectivities yielding a less transmissive atmosphere. The calculations also include variable aerosol composition, allowing for the use of a detailed aerosol history from the Max Planck Institut Aerosol Climatology (MAC). Ocean albedo and snow/ice albedo are also improved from Release 3. Total solar irradiance is now variable, averaging 1361 Wm-2. Water vapor is taken from ISCCP's nnHIRS product. Results from GSW Release 4 are presented and analyzed. Early comparison to surface measurements show improved agreement.