WorldWideScience

Sample records for provosts compensation packages

  1. An Examination of Superintendent Salaries and Compensation Packages in Kentucky

    Science.gov (United States)

    Carroll, Lisa M.

    2014-01-01

    The salaries and compensation packages of women in the United States fall short of those to men holding similar employment positions. This study will look specifically at the salaries and compensation packages of current Kentucky school superintendents and investigate whether or not there exists discrepencies among them along gender lines. The…

  2. Compensation packages: a strategic tool for employees’ performance and retention

    Directory of Open Access Journals (Sweden)

    Omotayo Adewale OSIBANJO

    2014-02-01

    Full Text Available The rate at which employees in private universities in Nigeria jump from one university to the other is becoming more disturbing and this could be as a result of compensation packages of different universities to attract competent employees. The aim of this study was to examine the effect of compensation packages on employees’ job performance and retention in a selected private University in Ogun State, South-West Nigeria. A model was developed and tested using one hundred and eleven valid questionnaires which were completed by academics and non-academic staff of the university. The collected data were carefully analyzed using simple percentage supported by structural equation modelling to test the hypotheses and relationships that may exist among the variables under consideration. The results showed strong relationship between compensation packages and employees’ performance and retention. The summary of the findings indicates that there is strong correlation between the tested dependent and independent variables (salary, bonus, incentives, allowances, and fringe benefits. However, management and decision makers should endeavour to review compensation packages at various levels in order to earn employees’ satisfaction and prevention of high labour turnover among the members of staff.

  3. Administrative Competencies Of Provosts Of Colleges Of Education ...

    African Journals Online (AJOL)

    A research instrument titled “Assessing the competencies of Provosts of Colleges of Education” was developed and administered to 448 academic and administrative staff of the Federal College of Education Obudu and that of Cross River College of Education Akamkpa. Means and t-test statistics were used for data analysis ...

  4. Perceptions of Canadian Provosts on the Institutional Role of Academic Libraries

    Science.gov (United States)

    Robertson, Mark

    2015-01-01

    This study examines perceptions of provosts from Canadian research-intensive universities regarding their institution's academic libraries. Interviews conducted with nine provosts explored how they perceive academic libraries in terms of alignment with institutional mission, how they envision the future of their libraries, and what they interpret…

  5. KEPEMIMPINAN TRANSFORMASIONAL, TRANSAKSIONAL, MOTIVASI KERJA, DAN KINERJA PERSONEL SATUAN PROVOST DETASEMEN MARKAS MABES ANGKATAN LAUT

    Directory of Open Access Journals (Sweden)

    Lutfi Adin Affandi

    2017-09-01

    Full Text Available The study aimed to investigate the effect of transformational leadership, transactional leadership and work of motivation on performance of personnel (Y provost detachment headquarter of Indonesian Navy, either simultaneously or partialy. 59 respondent from provost detachment headquarter of Indonesian Navy, completed 71 item self-reorted measures. The data collected survey and quesionares distributed to respondent. The statistic methode used was Multiple Regression. As expected, result indicated that transformational leadership, transactional leadership and work of motivation has positive effects on performance personnel. The result show that Fcount26.154 is greater than Ftable 2.77 at significant level 0.05 then H0 is rejected, which means that the transformational leadership (X1, transactional leadership (X2 and work of motivation (X3 together-equally significant effect on performance of personnel (Y. Partial test, all the independent variables have a value of significant alpa below 0.05 or tcount independent variables is greater than ttables thus proving the influence of transformational leadership, transactional leadership and work of motivation partially on performance personnel.

  6. Use of spectral pre-processing methods to compensate for the presence of packaging film in visible–near infrared hyperspectral images of food products

    Directory of Open Access Journals (Sweden)

    A.A. Gowen

    2010-10-01

    Full Text Available The presence of polymeric packaging film in images of food products may modify spectra obtained in hyperspectral imaging (HSI experiments, leading to undesirable image artefacts which may impede image classification. Some pre-processing of the image is typically required to reduce the presence of such artefacts. The objective of this research was to investigate the use of spectral pre-processing techniques to compensate for the presence of packaging film in hyperspectral images obtained in the visible–near infrared wavelength range (445–945 nm, with application in food quality assessment. A selection of commonly used pre-processing methods, used individually and in combination, were applied to hyperspectral images of flat homogeneous samples, imaged in the presence and absence of different packaging films (polyvinyl chloride and polyethylene terephthalate. Effects of the selected pre-treatments on variation due to the film’s presence were examined in principal components score space. The results show that the combination of first derivative Savitzky–Golay followed by standard normal variate transformation was useful in reducing variations in spectral response caused by the presence of packaging film. Compared to other methods examined, this combination has the benefits of being computationally fast and not requiring a priori knowledge about the sample or film used.

  7. Compensation and Voluntary Participation in a Continuum of Service

    Science.gov (United States)

    2006-03-01

    literature that discusses compensation " menus ," or cafeteria -style compensation packages. 14 Of course, it is important to set the levels of these...compensation. A compensation " menu " Another approach would be to offer reservists a choice of compensa- tion packages. 8 So-called compensation menus , or... cafeteria -style compensation packages, allow reservists to choose the form of com- pensation that has the most appeal to their unique situations and

  8. Equality and Equity in Compensation

    OpenAIRE

    Bao, Jiayi; Wu, Andy

    2017-01-01

    Equity compensation is widely used for incentivizing skilled employees, particularly in new technology businesses. Traditional theories explaining why firms offer equity suggest that workers with higher rank should receive compensation packages more heavily weighted in equity. However, we observe the puzzle that many firms adopt an equality-in-equity strategy: they offer different cash salaries across all jobs but the same equity compensation. We propose a behavioral theory of domain-continge...

  9. Losses compensation; Compensation des pertes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    One mission of RTE (Electric Power Transportation), is to watch over the losses compensation resulting from the power transport on the electric power network. Since january 2001, RTE makes good the electric losses by the purchase of energy. To choose the marketers, a consultation has been realized by RTE. This document presents the rules concerning these losses compensation. (A.L.B.)

  10. Packaging fluency

    DEFF Research Database (Denmark)

    Mocanu, Ana; Chrysochou, Polymeros; Bogomolova, Svetlana

    2011-01-01

    Research on packaging stresses the need for packaging design to read easily, presuming fast and accurate processing of product-related information. In this paper we define this property of packaging as “packaging fluency”. Based on the existing marketing and cognitive psychology literature...

  11. Microelectronic packaging

    CERN Document Server

    Datta, M; Schultze, J Walter

    2004-01-01

    Microelectronic Packaging analyzes the massive impact of electrochemical technologies on various levels of microelectronic packaging. Traditionally, interconnections within a chip were considered outside the realm of packaging technologies, but this book emphasizes the importance of chip wiring as a key aspect of microelectronic packaging, and focuses on electrochemical processing as an enabler of advanced chip metallization.Divided into five parts, the book begins by outlining the basics of electrochemical processing, defining the microelectronic packaging hierarchy, and emphasizing the impac

  12. Employee Compensation.

    Science.gov (United States)

    Osif, Bonnie A.; Harwood, Richard L.

    1995-01-01

    Presents an overview of selected literature about employee compensation. Highlights include the foundations of reward and recognition systems, incentive plans, problems with merit pay, a historical perspective on performance pay, evaluation criteria and processes, self-rating, job motivation and satisfaction, employee attitudes, collective…

  13. Distortion compensator

    NARCIS (Netherlands)

    Sakamoto, K.; Nauta, Bram

    2013-01-01

    PROBLEM TO BE SOLVED: To improve distortion compensation accuracy of a power amplifier. :SOLUTION: An LMS algorithm using a feedback signal that is an output signal of a power amplifier 1 input via an attenuator 15 and pseudorandom data calculates a delay of an input signal to the power amplifier 1.

  14. Distortion Compensator

    NARCIS (Netherlands)

    Sakamoto, K.; Nauta, Bram

    2013-01-01

    PROBLEM TO BE SOLVED: To improve distortion compensation accuracy of a power amplifier. ;SOLUTION: An LMS algorithm using a feedback signal that is an output signal of a power amplifier 1 input via an attenuator 17 and pseudorandom data calculates a delay of an input signal to the power amplifier 1

  15. Distortion Compensator

    NARCIS (Netherlands)

    Sakamoto, K.; Nauta, Bram

    2013-01-01

    PROBLEM TO BE SOLVED: To improve the accuracy of distortion compensation of a power amplifier. SOLUTION: An LMS algorithm using a feedback signal that is an output signal of a power amplifier 1 input via an attenuator 17 and pseudorandom data calculates a delay of an input signal to the power

  16. MEMS packaging

    CERN Document Server

    Hsu , Tai-Ran

    2004-01-01

    MEMS Packaging discusses the prevalent practices and enabling techniques in assembly, packaging and testing of microelectromechanical systems (MEMS). The entire spectrum of assembly, packaging and testing of MEMS and microsystems, from essential enabling technologies to applications in key industries of life sciences, telecommunications and aerospace engineering is covered. Other topics included are bonding and sealing of microcomponents, process flow of MEMS and microsystems packaging, automated microassembly, and testing and design for testing.The Institution of Engineering and Technology is

  17. 8 February 2010: University College London President & Provost M. Grant signing the guest book with CERN Director-General R.Heuer and Coordinator for External Relations F. Pauss; visiting the ATLAS control room with Collaboration Spokesperson F. Gianotti and Adviser for Non-Member States J. Ellis.

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    Caption for photograph 1002015 01: 8 February 2010: University College London President & Provost M. Grant (6th from left) visiting ATLAS control room with, from left to right, ATLAS Deputy Spokesperson and University of Birmingham D. Charlton; UCL Head of the HEP group M. Lancaster; UCL Vice Provost for research D. Price; ATLAS Collaboration Spokesperson F. Gianotti; UCL Department of Physics and Astronomy N. Konstantinidis; UCL Head of Physics Department J. Tennyson; Head of the UCL-ATLAS group and Vice-Dean for Research in the faculty of Mathematical and Physical Sciences J. Butterworth, visiting the ATLAS control room.

  18. Compensation Trends into the 21st Century.

    Science.gov (United States)

    Stelluto, George L.; Klein, Deborah P.

    1990-01-01

    Dramatic changes in the work force and society--increasing numbers of women workers, early retirement, structural changes in the economy, and changes in employer-employee relationships--have had substantial impact on the compensation package. These trends point to continued changes in pay, paid leave, insurance, and retirement and savings plans.…

  19. Environmental packaging

    OpenAIRE

    Davies, Gareth Benjamin Harverd

    2006-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. The food packaging industry is a £300bn global industry growing at a rate of 12% per year and increasingly favouring polymer or polymer-based materials. This generates 58m tonnes of "plastic" packaging waste annually in the EU and poses significant challenges for management given existing legislative constraints and increasing concerns surrounding the environmental impacts. The government, co...

  20. Top executive compensation and company performance in Finland

    DEFF Research Database (Denmark)

    Vittaniemi, Jukka

    1997-01-01

    The compensation of Chief Executive Officers (CEOs) has attracted a lot of attention in recent years. The current value of stock options in CEOs' compensation packages may exceed several million Finnish marks and at the same time companies are firing thousands of employees. In this paper we examine...

  1. Tunnel-proofing the executive suite: temptation, and the design of executive compensation

    OpenAIRE

    Thomas H. Noe

    2008-01-01

    This paper considers optimal compensation for a CEO who is entrusted with administering corporate assets honestly. Optimal compensation designs maximize integrity at minimum cost. These designs are very ‘low powered,’ i.e., while specifying a lower bound for performance and increasing pay with performance, they increase compensation at a rapidly decreasing rate. Thus, integrity considerations engender optimal compensation packages that closely resemble the very pervasive 80/120 bonus plan...

  2. Options in Compensation

    DEFF Research Database (Denmark)

    Flor, Christian Riis; Frimor, Hans; Munk, Claus

    2014-01-01

    to motivate effort. If rewarding low outcomes is infeasible, compensation consisting of stocks and options is a near-efficient means of overcoming the manager's induced aversion to undertaking risky investments, whereas stock compensation is not. However, stock plus option compensation may induce excessively......We derive the optimal compensation contract in a principal–agent setting in which outcome is used to provide incentives for both effort and risky investments. To motivate investment, optimal compensation entails rewards for high as well as low outcomes, and it is increasing at the mean outcome...... risky investments, and capping pay can be important in curbing such behavior....

  3. Top executive compensation and company performance in Finland

    OpenAIRE

    Vittaniemi, Jukka

    1997-01-01

    The compensation of Chief Executive Officers (CEOs) has attracted a lot of attention in recent years. The current value of stock options in CEOs' compensation packages may exceed several million Finnish marks and at the same time companies are firing thousands of employees. In this paper we examine whether the CEOs in our sample are rewarded for good economic performance or if pay increases occur irrespective of share performance and financial performance of their firms? The sample of thi...

  4. Gender and CEO Compensation

    OpenAIRE

    Jun Tang; Yan Wang

    2014-01-01

    The gender pay gap issues have long been debated. Prior research has shown significant or insignificant relations between gender differences on pay gap. This paper focuses on studying the relation of CEO gender on CEO compensation. We examine whether gender is related to both base salary and total compensation of CEOs. Further, by controlling for firm-fixed effect, we are able to come close to better understand the relation between gender and CEO compensation. In essence, firm-fixed effect an...

  5. Indexing executive compensation contracts

    NARCIS (Netherlands)

    Dittmann, I.; Maug, E.; Spalt, O.G.

    2013-01-01

    We analyze the efficiency of indexing executive pay by calibrating the standard compensation model to a large sample of U.S. CEOs. The benefits from indexing the strike price of options are small, and fully indexing all options would increase compensation costs by 50% for most firms. Indexing has

  6. Parent Training Packages

    Science.gov (United States)

    Stowitschek, Joseph J.; Hofmeister, Alan

    1975-01-01

    Discusses the current development of training packages for educating parents to help their children develop self-help, math, reading, and spelling skills. Two packages are described: (1) a multimedia package monitored by a professional in training workshops for parents of mentally retarded children; and (2) pencil and paper packages in which…

  7. Climate change and compensation

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint; Flanagan, Tine Bech

    2013-01-01

    This paper presents a case for compensation of actual harm from climate change in the poorest countries. First, it is shown that climate change threatens to reverse the fight to eradicate poverty. Secondly, it is shown how the problems raised in the literature for compensation to some extent...... are based on misconceptions and do not apply to compensation of present actual harm. Finally, two arguments are presented to the effect that, in so far as developed countries accept a major commitment to mitigate climate change, they should also accept a commitment to address or compensate actual harm from...... climate change. The first argument appeals to the principle that if it is an injustice to cause risk of incurring harm in the future, then it is also an injustice to cause a similar harm now. The second argument appeals to the principle that if there is moral reason to reduce the risk of specific harms...

  8. Workers Compensation Claim Data -

    Data.gov (United States)

    Department of Transportation — This data set contains DOT employee workers compensation claim data for current and past DOT employees. Types of data include claim data consisting of PII data (SSN,...

  9. Waste Package Lifting Calculation

    Energy Technology Data Exchange (ETDEWEB)

    H. Marr

    2000-05-11

    The objective of this calculation is to evaluate the structural response of the waste package during the horizontal and vertical lifting operations in order to support the waste package lifting feature design. The scope of this calculation includes the evaluation of the 21 PWR UCF (pressurized water reactor uncanistered fuel) waste package, naval waste package, 5 DHLW/DOE SNF (defense high-level waste/Department of Energy spent nuclear fuel)--short waste package, and 44 BWR (boiling water reactor) UCF waste package. Procedure AP-3.12Q, Revision 0, ICN 0, calculations, is used to develop and document this calculation.

  10. Packaging for Food Service

    Science.gov (United States)

    Stilwell, E. J.

    1985-01-01

    Most of the key areas of concern in packaging the three principle food forms for the space station were covered. It can be generally concluded that there are no significant voids in packaging materials availability or in current packaging technology. However, it must also be concluded that the process by which packaging decisions are made for the space station feeding program will be very synergistic. Packaging selection will depend heavily on the preparation mechanics, the preferred presentation and the achievable disposal systems. It will be important that packaging be considered as an integral part of each decision as these systems are developed.

  11. Dual Use Packaging Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA seeks down-weighted packaging compatible with microwave preparation and perhaps high hydrostatic pressure processing. New packaging must satisfy NASA's 3-year...

  12. Merganser Download Package

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data download package contains an Esri 10.0 MXD, file geodatabase and copy of this FGDC metadata record. The data in this package are used in support of the...

  13. Comparative Packaging Study

    Science.gov (United States)

    Perchonok, Michele; Antonini, David

    2008-01-01

    This viewgraph presentation describes a comparative packaging study for use on long duration space missions. The topics include: 1) Purpose; 2) Deliverables; 3) Food Sample Selection; 4) Experimental Design Matrix; 5) Permeation Rate Comparison; and 6) Packaging Material Information.

  14. Openability of tamperproof packaging

    OpenAIRE

    Del Castillo C., A.; Wever, R; Buijs, P.J.; Stevels, A.

    2007-01-01

    Communication, product protection and presentation are three key aspects in the world of packaging nowadays. Due to a retail landscape consisting of large stores, displaying packed products on the shelves in self-service environments, these aspects become increasingly important, not only for Fast Moving Consumer Goods, but for consumer durables as well. In the communication aspect, the package delivers a promise to the customer contained in the package, but the package itself is part of this ...

  15. Packaging Printing Today

    OpenAIRE

    Bolanča, Stanislav; Majnarić, Igor; Golubović, Kristijan

    2015-01-01

    Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. T...

  16. Trends in Food Packaging.

    Science.gov (United States)

    Ott, Dana B.

    1988-01-01

    This article discusses developments in food packaging, processing, and preservation techniques in terms of packaging materials, technologies, consumer benefits, and current and potential food product applications. Covers implications due to consumer life-style changes, cost-effectiveness of packaging materials, and the ecological impact of…

  17. Central heating: package boilers

    Energy Technology Data Exchange (ETDEWEB)

    Farahan, E.

    1977-05-01

    Performance and cost data for electrical and fossil-fired package boilers currently available from manufacturers are provided. Performance characteristics investigated include: unit efficiency, rated capacity, and average expected lifetime of units. Costs are tabulated for equipment and installation of various package boilers. The information supplied in this report will simplify the process of selecting package boilers required for industrial, commercial, and residential applications.

  18. (statcom) in synchronous compensator

    African Journals Online (AJOL)

    eobe

    The conventional and modified Newton bus power system. The conventional and modified Newton-Raphson-based power flow equations based power flow equations describing the steady state conditions before and after compensation was made to the system were presented. Solutions to the developed equations were ...

  19. Edible packaging materials.

    Science.gov (United States)

    Janjarasskul, Theeranun; Krochta, John M

    2010-01-01

    Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

  20. RELIABILITY OF LENTICULAR EXPANSION COMPENSATORS

    Directory of Open Access Journals (Sweden)

    Gabriel BURLACU,

    2011-11-01

    Full Text Available Axial lenticular compensators are made to take over the longitudinal heat expansion, shock , vibration and noise, made elastic connections for piping systems. In order to have a long life for installations it is necessary that all elements, including lenticular compensators, have a good reliability. This desire can be did by technology of manufactoring and assembly of compensators, the material for lenses and by maintenance.of compensator

  1. Stress Compensating Multilayers

    Science.gov (United States)

    Broadway, David M.; Ramsey, Brian D.; O'dell, Stephen; Gurgew, Danielle

    2017-01-01

    We present in-situ stress measurement results for single and multilayer thin-films deposited by magnetron sputtering. In particular, we report on the influence of the material interfaces on the ensuing stress in both the transient and steady-state regimes of film growth. This behavior is used to determine the appropriate thicknesses of the constituent layers that will result in a net tensile stress in multilayers composed of various material combinations. These multilayers can then be used to compensate the compressive integrated stress in single and multilayer EUV and x-ray optical coatings. The use of multilayers to compensate the integrated stress might be advantageous because, unlike single layers of chromium, the roughness is not expected to increase with the total thickness of the multilayer. In this paper, we demonstrate the technique for W/Si and Mo/Si multilayers and discuss its application to other material combinations.

  2. Compensability index for compensation radiotherapy after treatment interruptions

    Directory of Open Access Journals (Sweden)

    Putora Paul

    2012-12-01

    Full Text Available Abstract Background The goal of our work was to develop a simple method to evaluate a compensation treatment after unplanned treatment interruptions with respect to their tumour- and normal tissue effect. Methods We developed a software tool in java programming language based on existing recommendations to compensate for treatment interruptions. In order to express and visualize the deviations from the originally planned tumour and normal tissue effects we defined the compensability index. Results The compensability index represents an evaluation of the suitability of compensatory radiotherapy in a single number based on the number of days used for compensation and the preference of preserving the originally planned tumour effect or not exceeding the originally planned normal tissue effect. An automated tool provides a method for quick evaluation of compensation treatments. Conclusions The compensability index calculation may serve as a decision support system based on existing and established recommendations.

  3. Packaging for Sustainability

    CERN Document Server

    Lewis, Helen; Fitzpatrick, Leanne

    2012-01-01

    The packaging industry is under pressure from regulators, customers and other stakeholders to improve packaging’s sustainability by reducing its environmental and societal impacts. This is a considerable challenge because of the complex interactions between products and their packaging, and the many roles that packaging plays in the supply chain. Packaging for Sustainability is a concise and readable handbook for practitioners who are trying to implement sustainability strategies for packaging. Industry case studies are used throughout the book to illustrate possible applications and scenarios. Packaging for Sustainability draws on the expertise of researchers and industry practitioners to provide information on business benefits, environmental issues and priorities, environmental evaluation tools, design for environment, marketing strategies, and challenges for the future.

  4. SOFIA image motion compensation

    Science.gov (United States)

    Dunham, Edward; Collins, Peter; Reinacher, Andreas; Lampater, Ulrich

    2010-07-01

    We describe a laboratory simulation of an image motion compensation system for SOFIA that uses high-speed image acquisition from the science instrument HIPO as the sensing element of the system and a Newport voice-coil actuated fast steering mirror as the correcting actuator. Performance of the system when coupled to the SOFIA secondary mirror is estimated based on the known current performance of the secondary mirror controller. The system is described and the observed performance is presented together with expectations for applicability in flight with SOFIA.

  5. WASTE PACKAGE TRANSPORTER DESIGN

    Energy Technology Data Exchange (ETDEWEB)

    D.C. Weddle; R. Novotny; J. Cron

    1998-09-23

    The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

  6. User friendly packaging

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte

    2010-01-01

    “User-friendly Packaging” aims to create a platform for developing more user-friendly packaging. One intended outcome of the project is a guideline that industry can use in development efforts. The project also points the way for more extended collaboration between companies and design researchers. How...... can design research help industry in packaging innovation?...

  7. The BINSYN Program Package

    Directory of Open Access Journals (Sweden)

    Albert P. Linnell

    2012-06-01

    Full Text Available The BINSYN program package, recently expanded to calculate synthetic spectra of cataclysmic variables, is being further extended to include synthetic photometry of ordinary binary stars in addition to binary stars with optically thick accretion disks. The package includes a capability for differentials correction optimization of eclipsing binary systems using synthetic photometry.

  8. New Finsler package

    Science.gov (United States)

    Youssef, Nabil L.; Elgendi, S. G.

    2014-03-01

    The book “Handbook of Finsler geometry” has been included with a CD containing an elegant Maple package, FINSLER, for calculations in Finsler geometry. Using this package, an example concerning a Finsler generalization of Einstein’s vacuum field equations was treated. In this example, the calculation of the components of the hv-curvature of Cartan connection leads to wrong expressions. On the other hand, the FINSLER package works only in dimension four. We introduce a new Finsler package in which we fix the two problems and solve them. Moreover, we extend this package to compute not only the geometric objects associated with Cartan connection but also those associated with Berwald, Chern and Hashiguchi connections in any dimension. These improvements have been illustrated by a concrete example. Furthermore, the problem of simplifying tensor expressions is treated. This paper is intended to make calculations in Finsler geometry more easier and simpler.

  9. Fiber Based Dispersion Compensation

    CERN Document Server

    Ramachandran, Siddharth

    2007-01-01

    Dispersion management is a critical design criterion that characterizes the performance of an optical network, and has impacted almost every aspect of the physical layer of an optical transmission line. The past 10 years have seen an explosion in the variety of device effects exploited to obtain optimal performance from dispersion compensators, and this is the first book that deals exclusively with this technology. It starts with an exposition on the fundamental physics underlying dispersion and its effects on optical pulses, followed by at least one chapter devoted to each of the fiber-based dispersion-compensating devices that have either been deployed or are considered as serious candidates for future networks. The final section of this book then describes the systems-level impact of these devices, hence providing a one-stop reference for all aspects of optical-communication-network design pertaining to dispersion-management. Each chapter is written by the leading experts in the field, drawn from both acad...

  10. Prevalence and compensation of academic leaders, professors, and trustees on publicly traded US healthcare company boards of directors: cross sectional study.

    Science.gov (United States)

    Anderson, Timothy S; Good, Chester B; Gellad, Walid F

    2015-09-29

    To identify the prevalence, characteristics, and compensation of members of the boards of directors of healthcare industry companies who hold academic appointments as leaders, professors, or trustees. Cross sectional study. US healthcare companies publicly traded on the NASDAQ or New York Stock Exchange in 2013. 3434 directors of pharmaceutical, biotechnology, medical equipment and supply, and healthcare provider companies. Prevalence, annual compensation, and beneficial stock ownership of directors with affiliations as leaders, professors, or trustees of academic medical and research institutions. 446 healthcare companies met the study search criteria, of which 442 (99%) had publicly accessible disclosures on boards of directors. 180 companies (41%) had one or more academically affiliated directors. Directors were affiliated with 85 geographically diverse non-profit academic institutions, including 19 of the top 20 National Institute of Health funded medical schools and all of the 17 US News honor roll hospitals. Overall, these 279 academically affiliated directors included 73 leaders, 121 professors, and 85 trustees. Leaders included 17 chief executive officers and 11 vice presidents or executive officers of health systems and hospitals; 15 university presidents, provosts, and chancellors; and eight medical school deans or presidents. The total annual compensation to academically affiliated directors for their services to companies was $54,995,786 (£35,836,000; €49,185,900) (median individual compensation $193,000) and directors beneficially owned 59,831,477 shares of company stock (median 50,699 shares). A substantial number and diversity of academic leaders, professors, and trustees hold directorships at US healthcare companies, with compensation often approaching or surpassing common academic clinical salaries. Dual obligations to for profit company shareholders and non-profit clinical and educational institutions pose considerable personal, financial, and

  11. Packaging Printing Today

    Directory of Open Access Journals (Sweden)

    Stanislav Bolanča

    2015-12-01

    Full Text Available Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. The possibilities of particular printing techniques for optimal production of the determined packaging were studied in the paper. The problem was viewed from the technological and economical aspect. The possible printing quality and the time necessary for the printing realization were taken as key parameters. An important segment of the production and the way of life is alocation value and it had also found its place in this paper. The events in the field of packaging printing in the whole world were analyzed. The trends of technique developments and the printing technology for packaging printing in near future were also discussed.

  12. Consumer response to packaging design

    NARCIS (Netherlands)

    Steenis, Nigel D.; Herpen, van Erica; Lans, van der Ivo A.; Ligthart, Tom N.; Trijp, van Hans C.M.

    2017-01-01

    Building on theories of cue utilization, this paper investigates whether and how packaging sustainability influences consumer perceptions, inferences and attitudes towards packaged products. A framework is tested in an empirical study among 249 students using soup products varying in packaging

  13. Compensations during Unsteady Locomotion.

    Science.gov (United States)

    Qiao, Mu; Jindrich, Devin L

    2014-12-01

    Locomotion in a complex environment is often not steady, but the mechanisms used by animals to power and control unsteady locomotion (stability and maneuverability) are not well understood. We use behavioral, morphological, and impulsive perturbations to determine the compensations used during unsteady locomotion. At the level both of the whole-body and of joints, quasi-stiffness models are useful for describing adjustments to the functioning of legs and joints during maneuvers. However, alterations to the mechanics of legs and joints often are distinct for different phases of the step cycle or for specific joints. For example, negotiating steps involves independent changes of leg stiffness during compression and thrust phases of stance. Unsteady locomotion also involves parameters that are not part of the simplest reduced-parameter models of locomotion (e.g., the spring-loaded inverted pendulum) such as moments of the hip joint. Extensive coupling among translational and rotational parameters must be taken into account to stabilize locomotion or maneuver. For example, maneuvers with morphological perturbations (increased rotational inertial turns) involve changes to several aspects of movement, including the initial conditions of rotation and ground-reaction forces. Coupled changes to several parameters may be employed to control maneuvers on a trial-by-trial basis. Compensating for increased rotational inertia of the body during turns is facilitated by the opposing effects of several mechanical and behavioral parameters. However, the specific rules used by animals to control translation and rotation of the body to maintain stability or maneuver have not been fully characterized. We initiated direct-perturbation experiments to investigate the strategies used by humans to maintain stability following center-of-mass (COM) perturbations. When walking, humans showed more resistance to medio-lateral perturbations (lower COM displacement). However, when running, humans

  14. Hermeticity of electronic packages

    CERN Document Server

    Greenhouse, Hal; Romenesco, Bruce

    2011-01-01

    This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the packageùespecially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to so

  15. Hermeticity of electronic packages

    CERN Document Server

    Greenhouse, Hal

    2000-01-01

    This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the package-especially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to so

  16. Compensation Performance for Induction Motor Load of Voltage Dip Compensator

    Science.gov (United States)

    Nagamoto, Takamichi; Takayama, Katsumi; Kai, Takaaki

    The variable speed drives of the power electronics application are the most sensitive to the voltage dip that is caused by power system fault. Variable speed drives are composed by the converter, the voltage source inverter and induction motor. They could fall into operation failure by wrong control in the converter when degree of the voltage dip exceeds 15% and 10ms. Therefore, important loads are equipped with the voltage dip compensation. Since the load characteristic of the converter equals nearly the impedance load, the induction motors connected directly to power supply are more sensitive to the output voltage waveform of the compensator than the converter. Thus, the induction motors are used as the important load (compensated load) on the simulation. The simulations of the compensation performance to the induction motors are carried out by using simulation tool PSCAD/EMTDC. It is confirmed that the goal of the compensation performance is able to be achieved.

  17. An Integrated Thermal Compensation System for MEMS Inertial Sensors

    Directory of Open Access Journals (Sweden)

    Sheng-Ren Chiu

    2014-03-01

    Full Text Available An active thermal compensation system for a low temperature-bias-drift (TBD MEMS-based gyroscope is proposed in this study. First, a micro-gyroscope is fabricated by a high-aspect-ratio silicon-on-glass (SOG process and vacuum packaged by glass frit bonding. Moreover, a drive/readout ASIC, implemented by the 0.25 µm 1P5M standard CMOS process, is designed and integrated with the gyroscope by directly wire bonding. Then, since the temperature effect is one of the critical issues in the high performance gyroscope applications, the temperature-dependent characteristics of the micro-gyroscope are discussed. Furthermore, to compensate the TBD of the micro-gyroscope, a thermal compensation system is proposed and integrated in the aforementioned ASIC to actively tune the parameters in the digital trimming mechanism, which is designed in the readout ASIC. Finally, some experimental results demonstrate that the TBD of the micro-gyroscope can be compensated effectively by the proposed compensation system.

  18. Materials for advanced packaging

    CERN Document Server

    Wong, CP

    2017-01-01

    This second edition continues to be the most comprehensive review on the developments in advanced electronic packaging technologies, with a focus on materials and processing. Recognized experts in the field contribute to 22 updated and new chapters that provide comprehensive coverage on various 3D package architectures, novel bonding and joining techniques, wire bonding, wafer thinning techniques, organic substrates, and novel approaches to make electrical interconnects between integrated circuit and substrates. Various chapters also address advances in several key packaging materials, including: Lead-free solders Flip chip underfills Epoxy molding compounds Conductive adhesives Die attach adhesives/films Thermal interface materials (TIMS) Materials for fabricating embedded passives including capacitors, inductors, and resistors Materials and processing aspects on wafer-level chip scale package (CSP) and MicroElectroMechanical system (MEMS) Contributors also review new and emerging technologies such as Light ...

  19. Orbital heat rate package

    Science.gov (United States)

    Lovin, J. K.; Spradley, L. W.

    1979-01-01

    Package consisting of three separate programs used to accurately predict temperature distribution of spacecraft in planetary orbit is invaluable tool for design and analysis of other structures that must function in complex thermal environment.

  20. FLEXIBLE FOOD PACKAGING LABORATORY

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains equipment to fabricate and test prototype packages of many types and sizes (e.g., bags, pouches, trays, cartons, etc.). This equipment can...

  1. Packaging for Posterity.

    Science.gov (United States)

    Sias, Jim

    1990-01-01

    A project in which students designed environmentally responsible food packaging is described. The problem definition; research on topics such as waste paper, plastic, metal, glass, incineration, recycling, and consumer preferences; and the presentation design are provided. (KR)

  2. Dual Use Packaging Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA calculation that over a kg of packaging waste are generated per day for a 6 member crew. This represents over 1.5 metric tons of waste during a Mars mission....

  3. Informative document packaging waste

    NARCIS (Netherlands)

    Joosten JM; Nagelhout D; Duvoort GL; Weerd M de

    1989-01-01

    This "informative document packaging waste" forms part of a series of "informative documents waste materials". These documents are conducted by RIVM on the instructions of the Direcotrate General for the Environment, Waste Materials Directorate, in behalf of the program of

  4. The ENSDF Java Package

    Science.gov (United States)

    Sonzogni, A. A.

    2005-05-01

    A package of computer codes has been developed to process and display nuclear structure and decay data stored in the ENSDF (Evaluated Nuclear Structure Data File) library. The codes were written in an object-oriented fashion using the java language. This allows for an easy implementation across multiple platforms as well as deployment on web pages. The structure of the different java classes that make up the package is discussed as well as several different implementations.

  5. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2002-03-04

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT Shipping Package, and directly related components. This document complies with the minimum requirements as specified in TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event there is a conflict between this document and the SARP or C of C, the SARP and/or C of C shall govern. C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SAR P charges the WIPP Management and Operation (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 CFR 71.11. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document details the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize these operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs.

  6. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2003-04-30

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SARP charges the WIPP management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 CFR 71.11. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document provides the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs.

  7. Takeovers and (Excess) CEO Compensation

    NARCIS (Netherlands)

    Feito Ruiz, Isabel; Renneboog, Luc

    2017-01-01

    We study if a CEO’s equity-based compensation affects the expected value generation in takeovers. When the objectives of management and shareholders are more aligned, as proxied by the use of equity-based compensation, more value-maximizing acquisitions are expected. Whereas in widely-held firms the

  8. RH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2008-01-12

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package (also known as the "RH-TRU 72-B cask") and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a

  9. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-06-01

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  10. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-09-11

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the pplication." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  11. RH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-11-07

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to

  12. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-02-28

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.

  13. Food Packaging Materials

    Science.gov (United States)

    1978-01-01

    The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

  14. Food packages for Space Shuttle

    Science.gov (United States)

    Fohey, M. F.; Sauer, R. L.; Westover, J. B.; Rockafeller, E. F.

    1978-01-01

    The paper reviews food packaging techniques used in space flight missions and describes the system developed for the Space Shuttle. Attention is directed to bite-size food cubes used in Gemini, Gemini rehydratable food packages, Apollo spoon-bowl rehydratable packages, thermostabilized flex pouch for Apollo, tear-top commercial food cans used in Skylab, polyethylene beverage containers, Skylab rehydratable food package, Space Shuttle food package configuration, duck-bill septum rehydration device, and a drinking/dispensing nozzle for Space Shuttle liquids. Constraints and testing of packaging is considered, a comparison of food package materials is presented, and typical Shuttle foods and beverages are listed.

  15. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-12-13

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  16. CH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2006-04-25

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package TransporterModel II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant| (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations(CFR) §71.8. Any time a user suspects or has indications that the conditions ofapproval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are

  17. Aging: compensation or maturation?

    Science.gov (United States)

    Aine, Cheryl J; Woodruff, Chad C; Knoefel, Janice E; Adair, John C; Hudson, David; Qualls, Clifford; Bockholt, Jeremy; Best, Elaine; Kovacevic, Sanja; Cobb, Wayne; Padilla, Denise; Hart, Blaine; Stephen, Julia M

    2006-10-01

    Neuroimaging studies of healthy aging often reveal differences in neural activation patterns between young and elderly groups for episodic memory tasks, even though there are no differences in behavioral performance. One explanation typically offered is that the elderly compensate for their memory deficiencies through the recruitment of additional prefrontal regions. The present study of healthy aging compared magnetoencephalographic (MEG) time-courses localized to specific cortical regions in two groups of subjects (20-29 years and >or=65 years) during a visual delayed-match-to-sample (DMS) task. MR morphometrics and neuropsychological test results were also examined with the hope of providing insight into the nature of the age-related differences. The behavioral results indicated no differences in performance between young and elderly groups. Although there was a main effect of age on the latency of the initial peak in primary/secondary visual cortex, these longer latencies were not correlated with the performance of elderly on the DMS task. The lateral occipital gyrus (LOG) revealed qualitatively different patterns of activity for the two age groups corroborated by neuropsychological test results. Morphometric results for the young versus elderly groups revealed less white (WM) and gray matter (GM) volumes in the frontal lobes of the elderly. When a group of middle-aged subjects (33-43 years) was included in the morphometric analyses, the middle-aged subjects revealed statistically greater WM volumes in frontal and parietal cortex suggesting immature WM tracts in the young. Perhaps our elderly utilized a different strategy compared to the young due to the different brain maturation levels of these groups.

  18. Executive Compensation: Six Questions That Need Answering

    OpenAIRE

    Abowd, John M.; Kaplan, David S.

    1999-01-01

    In this article, we focus on how recent research advances can be used to address the following six questions: (1) How much does executive compensation cost the firm? (2) How much is executive compensation worth to the recipient? (3) How well does executive compensation work? (4) What are the effects of executive compensation? (5) How much executive compensation is enough? (6) Could executive compensation be improved? We stress the formal link between executive pay and performance that is prov...

  19. Workers' compensation and hepatitis C

    National Research Council Canada - National Science Library

    Sfikas, P M

    2000-01-01

    Dentists may be required to pay workers' compensation benefits for an employee with hepatitis C even if the employee was not working at the dentist's office at the time he or she contracted the disease...

  20. Future trends in electronic packaging

    Science.gov (United States)

    Elshabini, Aicha; Wang, Gangqiang; Barlow, Fred

    2006-03-01

    Electronic packaging is traditionally defined as the back-end process that transforms bare integrated circuits (IC) into functional products. As the IC feature size decreases and the size of silicon wafer increases, the cost per IC is reduced and the performance is enhanced. The future IC chips will be larger in size, have more input/output terminals (I/Os), and require higher power. In addition to the advancements in IC technology, electronic packaging is also driven by the market requirements for low cost, small size, and multi-functional electronic products. In response to these requirements, packaging related areas such as design, packaging architectures, materials, processes, and manufacturing equipment are all changing rapidly. Wafer-level packaging (WLP) offers the benefits of low cost and smallest size for single chip packages, since the package is done at wafer level other than individual die. After packages reach the horizontal limit of dimensions, 3D stacking solution provides more efficient packages through expanding packages in the vertical dimension. Functional integration is achieved with 3D stacking architectures. System in package (SiP), one of the solutions to system integration, incorporates electronics, non-electronic devices such as optical devices, biological devices, micro-electro-mechanical systems (MEMS), etc, and interconnection in a single package, to form smart structures or microsystems. MEMS devices require specialized packaging to serve new market applications. This paper and presentation describe the technology requirements and challenges of these advancing packaging areas. The potential solutions and future trends are presented.

  1. Geothermal Greenhouse Information Package

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, K. [P.E.; Boyd, T. [ed.

    1997-01-01

    This package of information is intended to provide a foundation of background information for developers of geothermal greenhouses. The material is divided into seven sections covering such issues as crop culture and prices, operating costs for greenhouses, heating system design, vendors and a list of other sources of information.

  2. Aquaculture Information Package

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, T.; Rafferty, K. [editors

    1998-01-01

    This package of information is intended to provide background to developers of geothermal aquaculture projects. The material is divided into eight sections and includes information on market and price information for typical species, aquaculture water quality issues, typical species culture information, pond heat loss calculations, an aquaculture glossary, regional and university aquaculture offices and state aquaculture permit requirements.

  3. Waste disposal package

    Science.gov (United States)

    Smith, M.J.

    1985-06-19

    This is a claim for a waste disposal package including an inner or primary canister for containing hazardous and/or radioactive wastes. The primary canister is encapsulated by an outer or secondary barrier formed of a porous ceramic material to control ingress of water to the canister and the release rate of wastes upon breach on the canister. 4 figs.

  4. Openability of tamperproof packaging

    NARCIS (Netherlands)

    Del Castillo C., A.; Wever, R.; Buijs, P.J.; Stevels, A.

    2007-01-01

    Communication, product protection and presentation are three key aspects in the world of packaging nowadays. Due to a retail landscape consisting of large stores, displaying packed products on the shelves in self-service environments, these aspects become increasingly important, not only for Fast

  5. Radioactive waste disposal package

    Science.gov (United States)

    Lampe, Robert F.

    1986-11-04

    A radioactive waste disposal package comprising a canister for containing vitrified radioactive waste material and a sealed outer shell encapsulating the canister. A solid block of filler material is supported in said shell and convertible into a liquid state for flow into the space between the canister and outer shell and subsequently hardened to form a solid, impervious layer occupying such space.

  6. High Efficiency Integrated Package

    Energy Technology Data Exchange (ETDEWEB)

    Ibbetson, James

    2013-09-15

    Solid-state lighting based on LEDs has emerged as a superior alternative to inefficient conventional lighting, particularly incandescent. LED lighting can lead to 80 percent energy savings; can last 50,000 hours – 2-50 times longer than most bulbs; and contains no toxic lead or mercury. However, to enable mass adoption, particularly at the consumer level, the cost of LED luminaires must be reduced by an order of magnitude while achieving superior efficiency, light quality and lifetime. To become viable, energy-efficient replacement solutions must deliver system efficacies of ≥ 100 lumens per watt (LPW) with excellent color rendering (CRI > 85) at a cost that enables payback cycles of two years or less for commercial applications. This development will enable significant site energy savings as it targets commercial and retail lighting applications that are most sensitive to the lifetime operating costs with their extended operating hours per day. If costs are reduced substantially, dramatic energy savings can be realized by replacing incandescent lighting in the residential market as well. In light of these challenges, Cree proposed to develop a multi-chip integrated LED package with an output of > 1000 lumens of warm white light operating at an efficacy of at least 128 LPW with a CRI > 85. This product will serve as the light engine for replacement lamps and luminaires. At the end of the proposed program, this integrated package was to be used in a proof-of-concept lamp prototype to demonstrate the component’s viability in a common form factor. During this project Cree SBTC developed an efficient, compact warm-white LED package with an integrated remote color down-converter. Via a combination of intensive optical, electrical, and thermal optimization, a package design was obtained that met nearly all project goals. This package emitted 1295 lm under instant-on, room-temperature testing conditions, with an efficacy of 128.4 lm/W at a color temperature of ~2873

  7. In-Package Chemistry Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    P.S. Domski

    2003-07-21

    The work associated with the development of this model report was performed in accordance with the requirements established in ''Technical Work Plan for Waste Form Degradation Modeling, Testing, and Analyses in Support of SR and LA'' (BSC 2002a). The in-package chemistry model and in-package chemistry model abstraction are developed to predict the bulk chemistry inside of a failed waste package and to provide simplified expressions of that chemistry. The purpose of this work is to provide the abstraction model to the Performance Assessment Project and the Waste Form Department for development of geochemical models of the waste package interior. The scope of this model report is to describe the development and validation of the in-package chemistry model and in-package chemistry model abstraction. The in-package chemistry model will consider chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) and codisposed high-level waste glass (HLWG) and N Reactor spent fuel (CDNR). The in-package chemistry model includes two sub-models, the first a water vapor condensation (WVC) model, where water enters a waste package as vapor and forms a film on the waste package components with subsequent film reactions with the waste package materials and waste form--this is a no-flow model, the reacted fluids do not exit the waste package via advection. The second sub-model of the in-package chemistry model is the seepage dripping model (SDM), where water, water that may have seeped into the repository from the surrounding rock, enters a failed waste package and reacts with the waste package components and waste form, and then exits the waste package with no accumulation of reacted water in the waste package. Both of the submodels of the in-package chemistry model are film models in contrast to past in-package chemistry models where all of the waste package pore space was filled with water. The

  8. 48 CFR 970.2270 - Unemployment compensation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Unemployment compensation... Unemployment compensation. (a) Each state has its own unemployment compensation system to provide payments to... unemployment compensation benefits through a payroll tax on employers. Most DOE contractors are subject to the...

  9. Lakes Ecosystem Services Download Package

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data download package contains Esri 10.0 MXDs, file geodatabases and copy of this FGDC metadata record. The data in this package are used in support of the Lake...

  10. Food packaging history and innovations.

    Science.gov (United States)

    Risch, Sara J

    2009-09-23

    Food packaging has evolved from simply a container to hold food to something today that can play an active role in food quality. Many packages are still simply containers, but they have properties that have been developed to protect the food. These include barriers to oxygen, moisture, and flavors. Active packaging, or that which plays an active role in food quality, includes some microwave packaging as well as packaging that has absorbers built in to remove oxygen from the atmosphere surrounding the product or to provide antimicrobials to the surface of the food. Packaging has allowed access to many foods year-round that otherwise could not be preserved. It is interesting to note that some packages have actually allowed the creation of new categories in the supermarket. Examples include microwave popcorn and fresh-cut produce, which owe their existence to the unique packaging that has been developed.

  11. Crime victims‘ right to compensation

    Directory of Open Access Journals (Sweden)

    Mrvić-Petrović Nataša

    2012-01-01

    Full Text Available This paper analyzes the most important documents of the United Nations, Council of Europe and the European Union relating to rights to damage compensation (restitution from offender and state compensation. The analysis shows that there is a gradual move from the concept of exercising the rights of victims in favor of a solidaristic model that takes less into account the rights of victims, and more the need to satisfy their legitimate interests. The economic crisis that is undermining the foundations of the welfare state could jeopardize the realization of this concept, especially in those European countries where the criminal justice system focuses solely on the offender, as is the case in Serbia. In such circumstances, regulation which protects the right to compensation, other rights and interests of victims, shall apply only to the extent that serves crime prevention. So it happens that in spite of a suitable normative framework and developments regarding the protection of victims of domestic violence and trafficking, the right to compensation and other rights of the victims do not actually get actualized in practice. In order to overcome this, a systemic reform to the criminal justice system should be undertaken with the aim to redirect the system towards the victim of the offense. Within these reforms a public fund for compensation of the victims of violence should be established and the process of mediation between the victim and the offender with the goal to make a settlement should be regulated, because these mechanisms do not exist in Serbia.

  12. Anticounterfeit packaging technologies

    Directory of Open Access Journals (Sweden)

    Ruchir Y Shah

    2010-01-01

    Full Text Available Packaging is the coordinated system that encloses and protects the dosage form. Counterfeit drugs are the major cause of morbidity, mortality, and failure of public interest in the healthcare system. High price and well-known brands make the pharma market most vulnerable, which accounts for top priority cardiovascular, obesity, and antihyperlipidemic drugs and drugs like sildenafil. Packaging includes overt and covert technologies like barcodes, holograms, sealing tapes, and radio frequency identification devices to preserve the integrity of the pharmaceutical product. But till date all the available techniques are synthetic and although provide considerable protection against counterfeiting, have certain limitations which can be overcome by the application of natural approaches and utilization of the principles of nanotechnology.

  13. RH Packaging Program Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions, LLC

    2003-08-25

    The purpose of this program guidance document is to provide technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the SARP and/or C of C shall govern. The C of C states: ''...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, ''Operating Procedures,'' of the application.'' It further states: ''...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, ''Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC approved, users need to be familiar with 10 CFR {section} 71.11, ''Deliberate Misconduct.'' Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document details the instructions to be followed to operate, maintain, and test the RH-TRU 72-B packaging. This Program Guidance standardizes instructions for all users. Users shall follow these instructions. Following these instructions assures that operations are safe and meet the requirements of the SARP. This document is available on the Internet at: ttp://www.ws/library/t2omi/t2omi.htm. Users are responsible for ensuring they are using the current

  14. The Swarm Magnetometry Package

    DEFF Research Database (Denmark)

    Merayo, José M.G.; Jørgensen, John Leif; Friis-Christensen, Eigil

    2008-01-01

    The Swarm mission under the ESA's Living Planet Programme is planned for launch in 2010 and consists of a constellation of three satellites at LEO. The prime objective of Swarm is to measure the geomagnetic field with unprecedented accuracy in space and time. The magnetometry package consists of ...... of an extremely accurate and stable vector magnetometer, which is co-mounted in an optical bench together with a start tracker system to ensure mechanical stability of the measurements....

  15. Amdahl 470 Chip Package

    CERN Multimedia

    1975-01-01

    In the late 70s the larger IBM computers were water cooled. Amdahl, an IBM competitor, invented an air cooling technology for it's computers. His company worked hard, developing a computer that was faster and less expensive than the IBM System/360 mainframe computer systems. This object contains an actual Amdahl series 470 computer logic chip with an air cooling device mounted on top. The package leads and cooling tower are gold-plated.

  16. Aquaculture information package

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, T.; Rafferty, K.

    1998-08-01

    This package of information is intended to provide background information to developers of geothermal aquaculture projects. The material is divided into eight sections and includes information on market and price information for typical species, aquaculture water quality issues, typical species culture information, pond heat loss calculations, an aquaculture glossary, regional and university aquaculture offices and state aquaculture permit requirements. A bibliography containing 68 references is also included.

  17. Compensation for electrical converter nonlinearities

    Energy Technology Data Exchange (ETDEWEB)

    Perisic, Milun; Ransom, Ray M; Kajouke, Lateef A

    2013-11-19

    Systems and methods are provided for delivering energy from an input interface to an output interface. An electrical system includes an input interface, an output interface, an energy conversion module between the input interface and the output interface, an inductive element between the input interface and the energy conversion module, and a control module. The control module determines a compensated duty cycle control value for operating the energy conversion module to produce a desired voltage at the output interface and operates the energy conversion module to deliver energy to the output interface with a duty cycle that is influenced by the compensated duty cycle control value. The compensated duty cycle control value is influenced by the current through the inductive element and accounts for voltage across the switching elements of the energy conversion module.

  18. Depth Compensated Spectral Domain Optical Coherence Tomography via Digital Compensation

    CERN Document Server

    Boroomand, Ameneh; Shafiee, Mohammad Javad; Bizheva, Kostadinka; Wong, Alexander

    2015-01-01

    Spectral Domain Optical Coherence Tomography (SD-OCT) is a well-known imaging modality which allows for \\textit{in-vivo} visualization of the morphology of different biological tissues at cellular level resolutions. The overall SD-OCT imaging quality in terms of axial resolution and Signal-to-Noise Ratio (SNR) degrades with imaging depth, while the lateral resolution degrades with distance from the focal plane. This image quality degradation is due both to the design of the SD-OCT imaging system and the optical properties of the imaged object. Here, we present a novel Depth Compensated SD-OCT (DC-OCT) system that integrates a Depth Compensating Digital Signal Processing (DC-DSP) module to improve the overall imaging quality via digital compensation. The designed DC-DSP module can be integrated to any SD-OCT system and is able to simultaneously compensate for the depth-dependent loss of axial and lateral resolutions, depth-varying SNR, as well as sidelobe artifact for improved imaging quality. The integrated D...

  19. Adaptive Motion Compensation in Radiotherapy

    CERN Document Server

    Murphy, Martin J

    2011-01-01

    External-beam radiotherapy has long been challenged by the simple fact that patients can (and do) move during the delivery of radiation. Recent advances in imaging and beam delivery technologies have made the solution--adapting delivery to natural movement--a practical reality. Adaptive Motion Compensation in Radiotherapy provides the first detailed treatment of online interventional techniques for motion compensation radiotherapy. This authoritative book discusses: Each of the contributing elements of a motion-adaptive system, including target detection and tracking, beam adaptation, and pati

  20. Electronic amplifiers for automatic compensators

    CERN Document Server

    Polonnikov, D Ye

    1965-01-01

    Electronic Amplifiers for Automatic Compensators presents the design and operation of electronic amplifiers for use in automatic control and measuring systems. This book is composed of eight chapters that consider the problems of constructing input and output circuits of amplifiers, suppression of interference and ensuring high sensitivity.This work begins with a survey of the operating principles of electronic amplifiers in automatic compensator systems. The succeeding chapters deal with circuit selection and the calculation and determination of the principal characteristics of amplifiers, as

  1. Optical biosensor with dispersion compensation.

    Science.gov (United States)

    Zong, W; Thirstrup, C; Sørensen, M H; Pedersen, H C

    2005-05-15

    Dispersion limits performance in many optical systems. In surface plasmon resonance (SPR) biosensors, the sensing area is an optical element in which the dispersion depends on the effective refractive index of the biochemical compounds to be measured. We report a method of compensating for wavelength dispersion in SPR biosensors employing two integrated diffractive optical coupling elements in a polymer substrate. The dispersion compensation is achieved over the whole dynamic measurement range and provides a biosensor more robust to wavelength fluctuations than prism-coupler SPR systems. The concept can readily be employed in other types of sensor measuring refractive-index changes.

  2. Packaging based on polymeric materials

    Directory of Open Access Journals (Sweden)

    Jovanović Slobodan M.

    2005-01-01

    Full Text Available In the past two years the consumption of common in the developed countries world wide (high tonnage polymers for packaging has approached a value of 50 wt.%. In the same period more than 50% of the packaging units on the world market were made of polymeric materials despite the fact that polymeric materials present 17 wt.% of all packaging materials. The basic properties of polymeric materials and their environmental and economical advantages, providing them such a position among packaging materials, are presented in this article. Recycling methods, as well as the development trends of polymeric packaging materials are also presented.

  3. Plutonium stabilization and packaging system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This document describes the functional design of the Plutonium Stabilization and Packaging System (Pu SPS). The objective of this system is to stabilize and package plutonium metals and oxides of greater than 50% wt, as well as other selected isotopes, in accordance with the requirements of the DOE standard for safe storage of these materials for 50 years. This system will support completion of stabilization and packaging campaigns of the inventory at a number of affected sites before the year 2002. The package will be standard for all sites and will provide a minimum of two uncontaminated, organics free confinement barriers for the packaged material.

  4. The case for the plain packaging of tobacco products.

    Science.gov (United States)

    Freeman, Becky; Chapman, Simon; Rimmer, Matthew

    2008-04-01

    The Framework Convention on Tobacco Control (FCTC) requires nations that have ratified the convention to ban all tobacco advertising and promotion. In the face of these restrictions, tobacco packaging has become the key promotional vehicle for the tobacco industry to interest smokers and potential smokers in tobacco products. This paper reviews available research into the probable impact of mandatory plain packaging and internal tobacco industry statements about the importance of packs as promotional vehicles. It critiques legal objections raised by the industry about plain packaging violating laws and international trade agreements. Searches for available evidence were conducted within the internal tobacco industry documents through the online document archives; tobacco industry trade publications; research literature through the Medline and Business Source Premier databases; and grey literature including government documents, research reports and non-governmental organization papers via the Google internet search engine. Plain packaging of all tobacco products would remove a key remaining means for the industry to promote its products to billions of the world's smokers and future smokers. Governments have required large surface areas of tobacco packs to be used exclusively for health warnings without legal impediment or need to compensate tobacco companies. Requiring plain packaging is consistent with the intention to ban all tobacco promotions. There is no impediment in the FCTC to interpreting tobacco advertising and promotion to include tobacco packs.

  5. Can Education Compensate for Society?

    Science.gov (United States)

    Pring, Richard

    2011-01-01

    The extent to which education can compensate for social disadvantage is a matter of political controversy, especially in the context of policies for social mobility. On the one hand, to blame poor achievement on social class or poverty was seen to dodge the professional responsibility of teachers. On the other, the strong correlation between…

  6. Quantitative evaluation of turbulence compensation

    NARCIS (Netherlands)

    Eekeren, A.W.M. van; Schutte, K.; Dijk, J.; Schwering, P.B.W.

    2013-01-01

    A well-known phenomena that diminishes the recognition range in infrared imagery is atmospheric turbulence. In literature many methods are described that try to compensate for the distortions caused by atmospheric turbulence. Most of these methods use a global processing approach in which they

  7. Addressing inadequate compensation | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-08-12

    Aug 12, 2016 ... Researchers in some projects are using “participatory valuation” processes with communities to help them appraise their lands' value and strengthening procedural protections so they can leverage compensation and benefit sharing. This is one of five cross-cutting issues that have emerged from early ...

  8. Mother-baby package.

    Science.gov (United States)

    Tamburlini, G

    1995-07-01

    The World Health Organization (WHO) Maternal Health and Safe Motherhood Programme developed the Mother-Baby package to facilitate the development of national strategies and plans of action. It was presented at an international meeting in Geneva in April 1994. The goals of the package are by the year 2000 to reduce maternal mortality by half and perinatal and neonatal mortality by 30-40% of 1990 levels. The package comprises: 1) a section on the technical basis and underlying strategies, 2) a section describing intervention before and during pregnancy, and during and after delivery, and 3) detailed recommendations on operating the program. The underlying strategy aims to reduce the number of high-risk and unwanted pregnancies; the number of obstetric complications; and the case fatality rate in women with complications. Interventions are based on a fourfold approach of family planning, quality antenatal care, clean and safe delivery, and access to essential obstetric care for high-risk pregnancies and complications. The district health system is the basic unit for planning and implementing the interventions. Midwives who live in the community are best equipped to provide appropriate community-based care to pregnant women. Pregnancy and obstetric complications requiring surgery and anesthesia should be available in the district hospital with an adequate referral system. Upgrading the skills of traditional birth attendants is also essential. National authorities should undertake a series of steps to carry out the interventions. A basic infrastructure, the upgrading of peripheral facilities, the development of human resources for safe motherhood, the effective delegation of responsibility, information, education, and communication (IEC), the involvement of nongovernmental organizations and women's groups, and the monitoring of results are other important elements in carrying out the interventions.

  9. Packaging - Materials review

    Science.gov (United States)

    Herrmann, Matthias

    2014-06-01

    Nowadays, a large number of different electrochemical energy storage systems are known. In the last two decades the development was strongly driven by a continuously growing market of portable electronic devices (e.g. cellular phones, lap top computers, camcorders, cameras, tools). Current intensive efforts are under way to develop systems for automotive industry within the framework of electrically propelled mobility (e.g. hybrid electric vehicles, plug-in hybrid electric vehicles, full electric vehicles) and also for the energy storage market (e.g. electrical grid stability, renewable energies). Besides the different systems (cell chemistries), electrochemical cells and batteries were developed and are offered in many shapes, sizes and designs, in order to meet performance and design requirements of the widespread applications. Proper packaging is thereby one important technological step for designing optimum, reliable and safe batteries for operation. In this contribution, current packaging approaches of cells and batteries together with the corresponding materials are discussed. The focus is laid on rechargeable systems for industrial applications (i.e. alkaline systems, lithium-ion, lead-acid). In principle, four different cell types (shapes) can be identified - button, cylindrical, prismatic and pouch. Cell size can be either in accordance with international (e.g. International Electrotechnical Commission, IEC) or other standards or can meet application-specific dimensions. Since cell housing or container, terminals and, if necessary, safety installations as inactive (non-reactive) materials reduce energy density of the battery, the development of low-weight packages is a challenging task. In addition to that, other requirements have to be fulfilled: mechanical stability and durability, sealing (e.g. high permeation barrier against humidity for lithium-ion technology), high packing efficiency, possible installation of safety devices (current interrupt device

  10. New package for CMOS sensors

    Science.gov (United States)

    Diot, Jean-Luc; Loo, Kum Weng; Moscicki, Jean-Pierre; Ng, Hun Shen; Tee, Tong Yan; Teysseyre, Jerome; Yap, Daniel

    2004-02-01

    Cost is the main drawback of existing packages for C-MOS sensors (mainly CLCC family). Alternative packages are thus developed world-wide. And in particular, S.T.Microelectronics has studied a low cost alternative packages based on QFN structure, still with a cavity. Intensive work was done to optimize the over-molding operation forming the cavity onto a metallic lead-frame (metallic lead-frame is a low cost substrate allowing very good mechanical definition of the final package). Material selection (thermo-set resin and glue for glass sealing) was done through standard reliability tests for cavity packages (Moisture Sensitivity Level 3 followed by temperature cycling, humidity storage and high temperature storage). As this package concept is new (without leads protruding the molded cavity), the effect of variation of package dimensions, as well as board lay-out design, are simulated on package life time (during temperature cycling, thermal mismatch between board and package leads to thermal fatigue of solder joints). These simulations are correlated with an experimental temperature cycling test with daisy-chain packages.

  11. Safety Analysis Report for packaging (onsite) steel waste package

    Energy Technology Data Exchange (ETDEWEB)

    BOEHNKE, W.M.

    2000-07-13

    The steel waste package is used primarily for the shipment of remote-handled radioactive waste from the 324 Building to the 200 Area for interim storage. The steel waste package is authorized for shipment of transuranic isotopes. The maximum allowable radioactive material that is authorized is 500,000 Ci. This exceeds the highway route controlled quantity (3,000 A{sub 2}s) and is a type B packaging.

  12. CH Packaging Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-09-11

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing "Short" 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing "Tall" 85-gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing SWB Payload Assembly; and 1.7, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence.

  13. CH Packaging Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-05-27

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing "Short" 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing "Tall" 85-Gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing Shielded Container Payload Assembly; 1.7, Preparing SWB Payload Assembly; and 1.8, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence, except as noted.

  14. 22 CFR 96.34 - Compensation.

    Science.gov (United States)

    2010-04-01

    ... Financial and Risk Management § 96.34 Compensation. (a) The agency or person does not compensate any... non-adoption services and discloses to the accrediting entity any corporate or financial arrangements...

  15. Functional Package Management with Guix

    OpenAIRE

    Courtès, Ludovic

    2013-01-01

    International audience; We describe the design and implementation of GNU Guix, a purely functional package manager designed to support a complete GNU/Linux distribution. Guix supports transactional upgrades and roll-backs, unprivileged package management, per-user profiles, and garbage collection. It builds upon the low-level build and deployment layer of the Nix package manager. Guix uses Scheme as its programming interface. In particular, we devise an embedded domain-specific language (EDSL...

  16. Biodegradable packaging materials : case: PLA

    OpenAIRE

    Jama, Mohamed

    2017-01-01

    The main aim of this bachelor thesis was to investigate the possibility of biodegradable packaging materials. Plastics and other non-degradable packaging materials have been used for many years and they have a negative impact on the environment since they do not degrade. Different research methods are used to get authentic results, which simplifies using biodegradable packaging materials. There were two biodegradability testing methods, which has been applied to this task:-, testing biode...

  17. IN-PACKAGE CHEMISTRY ABSTRACTION

    Energy Technology Data Exchange (ETDEWEB)

    E. Thomas

    2005-07-14

    This report was developed in accordance with the requirements in ''Technical Work Plan for Postclosure Waste Form Modeling'' (BSC 2005 [DIRS 173246]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as a function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model, which uses the EQ3/6 geochemistry-modeling tool, and a surface complexation model, which is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials, and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed (CDSP) waste packages containing high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor diffusing into the waste package, and (2) seepage water entering the waste package as a liquid from the drift. (1) Vapor-Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H{sub 2}O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Liquid-Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package.

  18. Pharmacists' acceptable levels of compensation for MTM services: a conjoint analysis.

    Science.gov (United States)

    Wang, Junling; Hong, Song Hee; Meng, Songmei; Brown, Lawrence M

    2011-12-01

    The Medicare Modernization Act of 2003 requires prescription drug plans to provide medication therapy management (MTM) services to Medicare beneficiaries who are at high risk for inappropriate use of medications. However, inadequate compensation has been a barrier for MTM expansion among pharmacists. The objective of this study was to determine pharmacists' acceptable levels of compensation for MTM services. A preference-based fractional factorial design of conjoint analysis was used by surveying 1524 active pharmacists in Tennessee. Pharmacists were asked to select between packages (scenarios) of MTM services that represented combinations of MTM attributes (characteristics). The MTM attributes included type of patient (new or returning), patient's number of chronic conditions (1, 3, or 6), patient's number of medications (4, 8, or 16), patient's annual drug costs ($2000, $3000, or $4000), service duration (15 minutes, 30 minutes, or 45 minutes), and price of MTM services ($30, $60, or $120). A survival analysis model was used to predict pharmacists' willingness to select 1 versus another MTM service package. Pharmacists' acceptable level of compensation was estimated as the marginal rate of substitution between the parameter estimates of an attribute and the price attribute of MTM. The parameter estimates were -0.0303 (PMTM services, respectively, so pharmacists were willing to accept $1.44/min (0.0303/0.0210), or $86.4/h, for MTM services. Pharmacists' characteristics were associated significantly with their acceptable levels of compensation: years of practice was associated with a higher need for compensation, pharmacy ownership (vs nonowner) associated with a lower need, and having provided MTM previously (vs having not provided MTM) was associated with a higher need. Pharmacists' acceptable level of compensation is in the higher part of current ranges from $30 to $100/h. To increase participation in MTM services, pharmacist compensation needs to be increased

  19. About the ZOOM minimization package

    Energy Technology Data Exchange (ETDEWEB)

    Fischler, M.; Sachs, D.; /Fermilab

    2004-11-01

    A new object-oriented Minimization package is available for distribution in the same manner as CLHEP. This package, designed for use in HEP applications, has all the capabilities of Minuit, but is a re-write from scratch, adhering to modern C++ design principles. A primary goal of this package is extensibility in several directions, so that its capabilities can be kept fresh with as little maintenance effort as possible. This package is distinguished by the priority that was assigned to C++ design issues, and the focus on producing an extensible system that will resist becoming obsolete.

  20. Federal workers' compensation program basics.

    Science.gov (United States)

    Mallon, Timothy M; Grizzell, Tifani L; Nelson, Cameron J L; Nelson, Cameron L; Hodgson, Michael

    2015-03-01

    Primary health care providers may not be familiar with the Federal Employees' Compensation Act (FECA) and Department of Defense regulations that govern injured workers' rights, benefits, and procedures to follow when an injured employee is seen in the military medical treatment facility. The FECA program was examined and each section reviewed to facilitate provider involvement from time of injury to final disposition of a claim and employee return to work. The best practices in case management are highlighted as well. Several areas of the FECA program require coordination between members of the installation Federal Worker's Compensation team. Areas requiring extensive communication by all team members were emphasized. Successful installation FECA programs engage all members of the FECA team in a collaborative fashion to share information, prevent injuries, and keep costs low.

  1. Frequency Compensation of an Audio Power Amplifier

    NARCIS (Netherlands)

    van der Zee, Ronan A.R.; van Heeswijk, R.

    2006-01-01

    A car audio power amplifier is presented that uses a frequency compensation scheme which avoids large compensation capacitors around the MOS power transistors, while retaining the bandwidth and stable load range of nested miller compensation. THD is 0.005%@(1kHz, 10W), SNR is 108dB, and the

  2. Dynamic Phase Compensation of wind turbines

    DEFF Research Database (Denmark)

    Soerensen, P.; Skaarup, J.; Iov, Florin

    2004-01-01

    This paper describes a dynamic phase compensation unit for a wind turbine with directly connected induction generators. The compensation unit is based on thyristor switched capacitors, where conventional wind turbine compensations use mechanical contactors to switch the capacitors. The unit modules...

  3. 77 FR 4885 - Patent Compensation Board Regulations

    Science.gov (United States)

    2012-02-01

    ... Part 780 RIN 1990-AA33 Patent Compensation Board Regulations AGENCY: Office of the General Counsel... Patent ] Compensation Board regulations to provide that the Secretary of Energy, or a person acting in that position, shall appoint, as needed, a three member panel to serve as the Patent Compensation Board...

  4. 12 CFR 2.5 - Bank compensation.

    Science.gov (United States)

    2010-01-01

    ... compensation in recognition of the role played by its personnel, premises, and good will in credit life... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Bank compensation. 2.5 Section 2.5 Banks and... compensation. (a) Nothing contained in this part prohibits a bank employee, officer, director, or principal...

  5. Personality Differences and Executive Compensation

    OpenAIRE

    Robin L. Bartlett; James H. Grant; Timothy I. Miller

    1990-01-01

    When estimating executive compensation structures econometrically, it is incorrect to ignore an executive's personality type. The problem becomes one of identifying managers and leaders. This study asserts that the key to distinguishing these two types of executives is in their personality types as reflected in their willingness to belong to various kinds of clubs. The authors' findings give new life to the debate over the relative importance of profitability versus sales as determinants of e...

  6. Compensation Techniques in Accelerator Physics

    Energy Technology Data Exchange (ETDEWEB)

    Sayed, Hisham Kamal [Old Dominion Univ., Norfolk, VA (United States)

    2011-05-01

    Accelerator physics is one of the most diverse multidisciplinary fields of physics, wherein the dynamics of particle beams is studied. It takes more than the understanding of basic electromagnetic interactions to be able to predict the beam dynamics, and to be able to develop new techniques to produce, maintain, and deliver high quality beams for different applications. In this work, some basic theory regarding particle beam dynamics in accelerators will be presented. This basic theory, along with applying state of the art techniques in beam dynamics will be used in this dissertation to study and solve accelerator physics problems. Two problems involving compensation are studied in the context of the MEIC (Medium Energy Electron Ion Collider) project at Jefferson Laboratory. Several chromaticity (the energy dependence of the particle tune) compensation methods are evaluated numerically and deployed in a figure eight ring designed for the electrons in the collider. Furthermore, transverse coupling optics have been developed to compensate the coupling introduced by the spin rotators in the MEIC electron ring design.

  7. Vestibular compensation following vestibular neurotomy.

    Science.gov (United States)

    Devèze, A; Montava, M; Lopez, C; Lacour, M; Magnan, J; Borel, L

    2015-09-01

    Four studies assessing vestibular compensation in Menière's disease patients undergoing unilateral vestibular neurotomy, using different analysis methods, are reviewed, with a focus on the different strategies used by patients according to their preoperative sensory preference. Four prospective studies performed in a university tertiary referral center were reviewed, measuring the pattern of vestibular compensation in Menière's disease patients before and after unilateral vestibular neurotomy on various assessment protocols: postural syndrome assessed on static posturography and gait analysis; perceptual syndrome assessed on subjective visual vertical perception; and oculomotor syndrome assessed on ocular cyclotorsion. Vestibular compensation occurred at variable intervals depending on the parameter investigated. Open-eye postural control and gait/walking returned to normal one month after neurotomy. Fine balance analysis found that visual perception of the vertical and ocular cyclotorsion impairment persisted at long-term follow-up. Clinical postural disturbance persisted only when visual afferents were cut off (eyes closed). These impairments were the expression of a postoperative change in postural strategy related to the new use of visual and non-visual references. Understanding pre-operative interindividual variation in balance strategy is critical to screening for postural instability and tailoring vestibular rehabilitation. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  8. The LISA Technology Package

    Science.gov (United States)

    Livas, Jeff

    2009-01-01

    The LISA Technology Package (LTP) is the payload of the European Space Agency's LISA Pathfinder mission. LISA Pathfinder was instigated to test, in a flight environment, the critical technologies required by LISA; namely, the inertial sensing subsystem and associated control laws and micro-Newton thrusters required to place a macroscopic test mass in pure free-fall. The UP is in the late stages of development -- all subsystems are currently either in the final stages of manufacture or in test. Available flight units are being integrated into the real-time testbeds for system verification tests. This poster will describe the UP and its subsystems, give the current status of the hardware and test campaign, and outline the future milestones leading to the UP delivery.

  9. Tritium waste package

    Science.gov (United States)

    Rossmassler, Rich; Ciebiera, Lloyd; Tulipano, Francis J.; Vinson, Sylvester; Walters, R. Thomas

    1995-01-01

    A containment and waste package system for processing and shipping tritium xide waste received from a process gas includes an outer drum and an inner drum containing a disposable molecular sieve bed (DMSB) seated within outer drum. The DMSB includes an inlet diffuser assembly, an outlet diffuser assembly, and a hydrogen catalytic recombiner. The DMSB absorbs tritium oxide from the process gas and converts it to a solid form so that the tritium is contained during shipment to a disposal site. The DMSB is filled with type 4A molecular sieve pellets capable of adsorbing up to 1000 curies of tritium. The recombiner contains a sufficient amount of catalyst to cause any hydrogen add oxygen present in the process gas to recombine to form water vapor, which is then adsorbed onto the DMSB.

  10. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  11. 38 CFR 21.3023 - Nonduplication; pension, compensation, and dependency and indemnity compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Nonduplication; pension, compensation, and dependency and indemnity compensation. 21.3023 Section 21.3023 Pensions, Bonuses, and... Nonduplication; pension, compensation, and dependency and indemnity compensation. (a) Child; age 18. A child who...

  12. Study on Reactive Automatic Compensation System Design

    Science.gov (United States)

    Zhe, Sun; Qingyang, Liang; Peiqing, Luo; Chenfei, Zhang

    At present, low-voltage side of transformer is public in urban distribution network, as inductive load of household appliances is increasing, the power factor decreased, this lead to a large loss of public transformer low voltage side, the supply voltage indicators can not meet user's requirements. Therefore, the design of reactive power compensation system has become another popular research. This paper introduces the principle of reactive power compensation, analyzes key technologies of reactive power compensation, design an overall program of reactive power automatic compensation system to conquer various deficiencies of reactive power automatic compensation equipment.

  13. Ensuring socially responsible packaging design

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte

    Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...

  14. Packaging perspective, 1910-1985

    Science.gov (United States)

    John W. Koning; James F. Laundrie

    1985-01-01

    For 75 years the Forest Products Laboratory has been concerned for the wise use of wood. One of the major uses of wood is packaging. This report summarizes the research reports completed in packaging and relates the output in terms of forest management and return on the taxpayer’s investment.

  15. Gentoo package dependencies over time

    NARCIS (Netherlands)

    Bloemen, Remco; Amrit, Chintan Amrit; Kuhlmann, Stefan; Ordonez Matamoros, Hector Gonzalo

    2014-01-01

    Open source distributions such as Gentoo need to accurately track dependency relations between software packages in order to install working systems. To do this, Gentoo has a carefully authored database containing those relations. In this paper, we extract the Gentoo package dependency graph and its

  16. Packaging Software Assets for Reuse

    Science.gov (United States)

    Mattmann, C. A.; Marshall, J. J.; Downs, R. R.

    2010-12-01

    The reuse of existing software assets such as code, architecture, libraries, and modules in current software and systems development projects can provide many benefits, including reduced costs, in time and effort, and increased reliability. Many reusable assets are currently available in various online catalogs and repositories, usually broken down by disciplines such as programming language (Ibiblio for Maven/Java developers, PyPI for Python developers, CPAN for Perl developers, etc.). The way these assets are packaged for distribution can play a role in their reuse - an asset that is packaged simply and logically is typically easier to understand, install, and use, thereby increasing its reusability. A well-packaged asset has advantages in being more reusable and thus more likely to provide benefits through its reuse. This presentation will discuss various aspects of software asset packaging and how they can affect the reusability of the assets. The characteristics of well-packaged software will be described. A software packaging domain model will be introduced, and some existing packaging approaches examined. An example case study of a Reuse Enablement System (RES), currently being created by near-term Earth science decadal survey missions, will provide information about the use of the domain model. Awareness of these factors will help software developers package their reusable assets so that they can provide the most benefits for software reuse.

  17. One Size Does Not Fit All: Personalized Incentives in Military Compensation

    Science.gov (United States)

    2013-03-25

    ORGANIZATION NAME(S) AND ADDRESS(ES) AND ADDRESS(ES) Graduate School of Business & Public Policy Naval Postgraduate School 555 Dyer Road, Monterey, CA...personalized NMI packages in military compensation through a sealed-bid reverse auction, where service members select individual NMIs from a “ cafeteria ...Coughlan William R. Gates Research Associate Professor Dean Graduate School of Business & Graduate School of Business & Public Policy Public

  18. 19 CFR 191.13 - Packaging materials.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Packaging materials. 191.13 Section 191.13 Customs... (CONTINUED) DRAWBACK General Provisions § 191.13 Packaging materials. (a) Imported packaging material... packaging material when used to package or repackage merchandise or articles exported or destroyed pursuant...

  19. Compensating for Missing Data from Longitudinal Studies Using WinBUGS

    Directory of Open Access Journals (Sweden)

    Gretchen Carrigan

    2007-06-01

    Full Text Available Missing data is a common problem in survey based research. There are many packages that compensate for missing data but few can easily compensate for missing longitudinal data. WinBUGS compensates for missing data using multiple imputation, and is able to incorporate longitudinal structure using random effects. We demonstrate the superiority of longitudinal imputation over cross-sectional imputation using WinBUGS. We use example data from the Australian Longitudinal Study on Women’s Health. We give a SAS macro that uses WinBUGS to analyze longitudinal models with missing covariate date, and demonstrate its use in a longitudinal study of terminal cancer patients and their carers.

  20. DC-Compensated Current Transformer.

    Science.gov (United States)

    Ripka, Pavel; Draxler, Karel; Styblíková, Renata

    2016-01-20

    Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component.

  1. In-Package Chemistry Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    E. Thomas

    2004-11-09

    This report was developed in accordance with the requirements in ''Technical Work Plan for: Regulatory Integration Modeling and Analysis of the Waste Form and Waste Package'' (BSC 2004 [DIRS 171583]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model that uses the EQ3/6 geochemistry-modeling tool, and a surface complexation model that is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed waste packages that contain both high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor that diffuses into the waste package, and (2) seepage water that enters the waste package from the drift as a liquid. (1) Vapor Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H2O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Water Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package. TSPA-LA uses the vapor influx case for the nominal scenario for simulations where the waste

  2. Naval Waste Package Design Sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    T. Schmitt

    2006-12-13

    The purpose of this calculation is to determine the sensitivity of the structural response of the Naval waste packages to varying inner cavity dimensions when subjected to a comer drop and tip-over from elevated surface. This calculation will also determine the sensitivity of the structural response of the Naval waste packages to the upper bound of the naval canister masses. The scope of this document is limited to reporting the calculation results in terms of through-wall stress intensities in the outer corrosion barrier. This calculation is intended for use in support of the preliminary design activities for the license application design of the Naval waste package. It examines the effects of small changes between the naval canister and the inner vessel, and in these dimensions, the Naval Long waste package and Naval Short waste package are similar. Therefore, only the Naval Long waste package is used in this calculation and is based on the proposed potential designs presented by the drawings and sketches in References 2.1.10 to 2.1.17 and 2.1.20. All conclusions are valid for both the Naval Long and Naval Short waste packages.

  3. Perfume Packaging, Seduction and Gender

    Directory of Open Access Journals (Sweden)

    Magdalena Petersson McIntyre

    2013-06-01

    Full Text Available This article examines gender and cultural sense-making in relation to perfumes and their packaging. Gendered meanings of seduction, choice, consumption and taste are brought to the fore with the use of go-along interviews with consumers in per-fume stores. Meeting luxury packages in this feminized environment made the interviewed women speak of bottles as objects to fall in love with and they de-scribed packages as the active part in an act of seduction where they were expect-ing packages to persuade them into consumption. The interviewed men on the other hand portrayed themselves as active choice-makers and stressed that they were always in control and not seduced by packaging. However, while their ways of explaining their relationship with packaging on the surface seems to confirm cultural generalizations in relation to gender and seduction, the article argues that letting oneself be seduced is no less active than seducing. Based on a combination of actor network theories and theories of gender performativity the article points to the agency of packaging for constructions of gender and understands the inter-viewees as equally animated by the flows of passion which guide their actions.

  4. Safety evaluation for packaging (onsite) concrete-lined waste packaging

    Energy Technology Data Exchange (ETDEWEB)

    Romano, T.

    1997-09-25

    The Pacific Northwest National Laboratory developed a package to ship Type A, non-transuranic, fissile excepted quantities of liquid or solid radioactive material and radioactive mixed waste to the Central Waste Complex for storage on the Hanford Site.

  5. International Oil Pollution Compensation Fund

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    The International Oil Pollution Compensation Fund was established under a 1971 Intergovernmental Maritime Consultative Organization Convention to supplement the 1969 Civil Liability Convention (CLC) under which shipowners were held liable for damage caused by oil spills up to $18 million per incident; the new fund increases the amount payable per incident to $57 million as of April 1979. A further increase up to about $76 million is now under consideration. During 1979, the Fund has been concerned in particular with claims arising out of oil spills in Japan and the Baltic Sea. In the former case, some 540 tons of oil was lost by Miya Maru No. 8 after a collision in March 1979 in the Japanese Inland Sea; cleanup costs and compensation to fishermen were about (pound sterling)400,000. In the latter phase, crude oil apparently coming from the Russian tanker Antonio Gramsci, which grounded off Ventspils in February 1979, drifted across the Baltic and was trapped in or under the ice. After the ice melted, it spread to more than 2000 islands in the Swedish Archipelaso; cleanup measures may result in claims as high as (pound sterling) 8 million.

  6. Characterization of integrated circuit packaging materials

    CERN Document Server

    Moore, Thomas

    1993-01-01

    Chapters in this volume address important characteristics of IC packages. Analytical techniques appropriate for IC package characterization are demonstrated through examples of the measurement of critical performance parameters and the analysis of key technological problems of IC packages. Issues are discussed which affect a variety of package types, including plastic surface-mount packages, hermetic packages, and advanced designs such as flip-chip, chip-on-board and multi-chip models.

  7. Large area LED package

    Science.gov (United States)

    Goullon, L.; Jordan, R.; Braun, T.; Bauer, J.; Becker, F.; Hutter, M.; Schneider-Ramelow, M.; Lang, K.-D.

    2015-03-01

    Solid state lighting using LED-dies is a rapidly growing market. LED-dies with the needed increasing luminous flux per chip area produce a lot of heat. Therefore an appropriate thermal management is required for general lighting with LEDdies. One way to avoid overheating and shorter lifetime is the use of many small LED-dies on a large area heat sink (down to 70 μm edge length), so that heat can spread into a large area while at the same time light also appears on a larger area. The handling with such small LED-dies is very difficult because they are too small to be picked with common equipment. Therefore a new concept called collective transfer bonding using a temporary carrier chip was developed. A further benefit of this new technology is the high precision assembly as well as the plane parallel assembly of the LED-dies which is necessary for wire bonding. It has been shown that hundred functional LED-dies were transferred and soldered at the same time. After the assembly a cost effective established PCB-technology was applied to produce a large-area light source consisting of many small LED-dies and electrically connected on a PCB-substrate. The top contacts of the LED-dies were realized by laminating an adhesive copper sheet followed by LDI structuring as known from PCB-via-technology. This assembly can be completed by adding converting and light forming optical elements. In summary two technologies based on standard SMD and PCB technology have been developed for panel level LED packaging up to 610x 457 mm2 area size.

  8. Packaging systems for animal origin food

    Directory of Open Access Journals (Sweden)

    2011-03-01

    Full Text Available The main task of food packaging is to protect the product during storage and transport against the action of biological, chemical and mechanical factors. The paper presents packaging systems for food of animal origin. Vacuum and modified atmosphere packagings were characterised together with novel types of packagings, referred to as intelligent packaging and active packaging. The aim of this paper was to present all advantages and disadvantages of packaging used for meat products. Such list enables to choose the optimal type of packaging for given assortment of food and specific conditions of the transport and storing.

  9. Applications of Active Packaging in Breads

    Directory of Open Access Journals (Sweden)

    Ali Göncü

    2017-10-01

    Full Text Available Changes on consumer preferences lead to innovations and improvements in new packaging technologies. With these new developments passive packaging technologies aiming to protect food nowadays have left their place to active and intelligent packaging technologies that have other various functions beside protection of food. Active packaging is defined as an innovative packaging type and its usage increases the shelf life of food significantly. Applications of active packaging have begun to be used for packaging of breads. In this study active packaging applications in breads have been reviewed.

  10. Magnetizing process control for compensation ferrometers

    Science.gov (United States)

    Havránek, Aleš; Zemánek, Ivan

    2017-12-01

    The magnetomotive force (MMF) compensation method is the powerful one for the measurement of open specimen soft magnetic materials parameters at AC magnetization. Although the effective control of the MMF compensation magnetizing process is relatively complicated, the other compensation method properties make this method excellent for precise absolute measurements. Compensation ferrometers (SSTs based on the compensation method) could be improved by more efficient magnetizing process control. This paper deals with the magnetizing process regulator based on the model of the compensation ferrometer magnetizing equipment. The regulator design, its properties, implementation and results of the measurements with described regulator are presented in this paper. The regulator improves the precision of the hysteresis loop measurement by more than ten times. It could be simplified for the IEC method magnetizing equipment.

  11. Loss Aversion, Stochastic Compensation, and Team Incentives

    OpenAIRE

    大洞, 公平; Murooka, Takeshi

    2013-01-01

    We investigate moral-hazard problems with limited liability where agents have expectation-based reference-dependent preferences. We show that stochastic compensation for low performance can be optimal. Because of loss aversion, the agents have first-order risk aversion to wage uncertainty. This causes the agents to work harder when their low performance is stochastically compensated. We also examine team incentives for credibly employing such stochastic compensation. In an optimal contract, l...

  12. Emotional response towards food packaging

    DEFF Research Database (Denmark)

    Liao, Lewis Xinwei; Corsi, Armando M.; Chrysochou, Polymeros

    2015-01-01

    In this paper we investigate consumers’ emotional responses to food packaging. More specifically, we use self-report and physiological measures to jointly assess emotional responses to three typical food packaging elements: colours (lowwavelength vs. high-wavelength), images (positive vs. negative......) and typefaces (simple vs. ornate). A sample of 120 participants was exposed to mock package design concepts of chocolate blocks. The results suggest that images generate an emotional response that can be measured by both self-report and physiological measures, whereas colours and typefaces generate emotional...... response that can only be measured by self-report measures. We propose that a joint application of selfreport and physiological measures can lead to richer information and wider interpretation of consumer emotional responses to food packaging elements than using either measure alone....

  13. New Packaging for Amplifier Slabs

    Energy Technology Data Exchange (ETDEWEB)

    Riley, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thorsness, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Suratwala, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Steele, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rogowski, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-03-18

    The following memo provides a discussion and detailed procedure for a new finished amplifier slab shipping and storage container. The new package is designed to maintain an environment of <5% RH to minimize weathering.

  14. Packaging Review Guide for Reviewing Safety Analysis Reports for Packagings

    Energy Technology Data Exchange (ETDEWEB)

    DiSabatino, A; Biswas, D; DeMicco, M; Fisher, L E; Hafner, R; Haslam, J; Mok, G; Patel, C; Russell, E

    2007-04-12

    This Packaging Review Guide (PRG) provides guidance for Department of Energy (DOE) review and approval of packagings to transport fissile and Type B quantities of radioactive material. It fulfills, in part, the requirements of DOE Order 460.1B for the Headquarters Certifying Official to establish standards and to provide guidance for the preparation of Safety Analysis Reports for Packagings (SARPs). This PRG is intended for use by the Headquarters Certifying Official and his or her review staff, DOE Secretarial offices, operations/field offices, and applicants for DOE packaging approval. This PRG is generally organized at the section level in a format similar to that recommended in Regulatory Guide 7.9 (RG 7.9). One notable exception is the addition of Section 9 (Quality Assurance), which is not included as a separate chapter in RG 7.9. Within each section, this PRG addresses the technical and regulatory bases for the review, the manner in which the review is accomplished, and findings that are generally applicable for a package that meets the approval standards. This Packaging Review Guide (PRG) provides guidance for DOE review and approval of packagings to transport fissile and Type B quantities of radioactive material. It fulfills, in part, the requirements of DOE O 460.1B for the Headquarters Certifying Official to establish standards and to provide guidance for the preparation of Safety Analysis Reports for Packagings (SARPs). This PRG is intended for use by the Headquarters Certifying Official and his review staff, DOE Secretarial offices, operations/field offices, and applicants for DOE packaging approval. The primary objectives of this PRG are to: (1) Summarize the regulatory requirements for package approval; (2) Describe the technical review procedures by which DOE determines that these requirements have been satisfied; (3) Establish and maintain the quality and uniformity of reviews; (4) Define the base from which to evaluate proposed changes in scope

  15. AliPDU Package Upgrade

    CERN Document Server

    "Martin, Michael

    2015-01-01

    "AliPDU Package" is a set of script, panels, and datapoints designed in WinCC to manage and monitor PDU's. PDU is an essential component in the data center, in order to make data center working properly through the monitoring of power distribution and environmental condition of the data center. In this project "AliPDU Package" is upgraded so it can be used to monitor environmental condition of data center using PDU's and external environmental sensor connected to PDU.

  16. AliPDU Package Upgrade

    CERN Document Server

    Martin, Michael

    2015-01-01

    AliPDU Package is a set of script, panels, and datapoints designed in WinCC to manage and monitor PDU's. PDU is an essential component in the data center, in order to make data center working properly through the monitoring of power distribution and environmental condition of the data center. In this project "AliPDU Package" is upgraded so it can be used to monitor environmental condition of data center using PDU's and external environmental sensor connected to PDU.

  17. Food Packaging for Sustainable Development

    OpenAIRE

    Williams, Helén

    2011-01-01

    Packaging has been on the environmental agenda for decades. It has been discussed and debated within the society mainly as an environmental problem. Production, distribution and consumption of food and drinks contribute significant to the environmental impact. However, consumers in the EU waste about 20% of the food they buy. The function of packaging in reducing the amount of food losses is an important but often neglected environmental issue. This thesis focuses on the functions of packagin...

  18. Watermarking spot colors in packaging

    Science.gov (United States)

    Reed, Alastair; Filler, TomáÅ.¡; Falkenstern, Kristyn; Bai, Yang

    2015-03-01

    In January 2014, Digimarc announced Digimarc® Barcode for the packaging industry to improve the check-out efficiency and customer experience for retailers. Digimarc Barcode is a machine readable code that carries the same information as a traditional Universal Product Code (UPC) and is introduced by adding a robust digital watermark to the package design. It is imperceptible to the human eye but can be read by a modern barcode scanner at the Point of Sale (POS) station. Compared to a traditional linear barcode, Digimarc Barcode covers the whole package with minimal impact on the graphic design. This significantly improves the Items per Minute (IPM) metric, which retailers use to track the checkout efficiency since it closely relates to their profitability. Increasing IPM by a few percent could lead to potential savings of millions of dollars for retailers, giving them a strong incentive to add the Digimarc Barcode to their packages. Testing performed by Digimarc showed increases in IPM of at least 33% using the Digimarc Barcode, compared to using a traditional barcode. A method of watermarking print ready image data used in the commercial packaging industry is described. A significant proportion of packages are printed using spot colors, therefore spot colors needs to be supported by an embedder for Digimarc Barcode. Digimarc Barcode supports the PANTONE spot color system, which is commonly used in the packaging industry. The Digimarc Barcode embedder allows a user to insert the UPC code in an image while minimizing perceptibility to the Human Visual System (HVS). The Digimarc Barcode is inserted in the printing ink domain, using an Adobe Photoshop plug-in as the last step before printing. Since Photoshop is an industry standard widely used by pre-press shops in the packaging industry, a Digimarc Barcode can be easily inserted and proofed.

  19. Compensation for industrial injuries and occupational diseases

    Directory of Open Access Journals (Sweden)

    Jana Mervartová

    2011-01-01

    Full Text Available According to the current legislation in the Labour Code the employer’s liability for personal injury resulting from industrial injury or disease is objective, i.e. liability for result. Employer has always an obligation to pay damages if the employer has not liberated himself from no-fault liability. In terms which are explicitly defined by the Labour Code the employer can relieved from fully liability or in part. The injured party is entitled to compensation for loss of earnings and compensation for pain and diminished social capability, and compensation for reasonably incurred expenses related to medical treatment and compensation for damage. Additional compensation is provided in the case of an employee’s death which occurred due to an industrial injury or occupational disease. This may be compensation for reasonable funeral expenses, reimbursement for dependent survivors, one- off compensation for dependents and damage compensation. Each employer now has to pay compulsory insurance against injury. The new law on accident insurance of employees makes the principle of compensation redundant and establishes the principle of insurance. Employers will pay premiums to the Czech Social Security Administration, who will pay allowances from the accident insurance directly to the injured employees. The aim of the new law on accident insurance of employees is to motivate employees to return to work and curb abuse of the insurance. The law should come into effect on 1st January 2013.

  20. Undulator with dynamic compensation of magnetic forces

    Science.gov (United States)

    Gluskin, Efim; Trakhtenberg, Emil; Xu, Joseph Z.

    2016-05-31

    A method and apparatus for implementing dynamic compensation of magnetic forces for undulators are provided. An undulator includes a respective set of magnet arrays, each attached to a strongback, and placed on horizontal slides and positioned parallel relative to each other with a predetermined gap. Magnetic forces are compensated by a set of compensation springs placed along the strongback. The compensation springs are conical springs having exponential-force characteristics that substantially match undulator magnetic forces independently of the predetermined gap. The conical springs are positioned along the length of the magnets.

  1. Packaging food for radiation processing

    Science.gov (United States)

    Komolprasert, Vanee

    2016-12-01

    Irradiation can play an important role in reducing pathogens that cause food borne illness. Food processors and food safety experts prefer that food be irradiated after packaging to prevent post-irradiation contamination. Food irradiation has been studied for the last century. However, the implementation of irradiation on prepackaged food still faces challenges on how to assess the suitability and safety of these packaging materials used during irradiation. Irradiation is known to induce chemical changes to the food packaging materials resulting in the formation of breakdown products, so called radiolysis products (RP), which may migrate into foods and affect the safety of the irradiated foods. Therefore, the safety of the food packaging material (both polymers and adjuvants) must be determined to ensure safety of irradiated packaged food. Evaluating the safety of food packaging materials presents technical challenges because of the range of possible chemicals generated by ionizing radiation. These challenges and the U.S. regulations on food irradiation are discussed in this article.

  2. Antimicrobial Food Packaging: Potential & Pitfalls

    Directory of Open Access Journals (Sweden)

    BHANU eMALHOTRA

    2015-06-01

    Full Text Available Nowadays food preservation, quality maintenance, and safety are major growing concerns of the food industry. It is evident that over time consumers’ demand for natural and safe food products with stringent regulations to prevent food-borne infectious diseases. Antimicrobial packaging which is thought to be a subset of active packaging and controlled release packaging is one such promising technology which effectively impregnates the antimicrobial into the food packaging film material and subsequently delivers it over the stipulated period of time to kill the pathogenic microorganisms affecting food products thereby increasing the shelf life to severe folds. This paper presents a picture of the recent research on antimicrobial agents that are aimed at enhancing and improving food quality and safety by reduction of pathogen growth and extension of shelf life, in a form of a comprehensive review. Examination of the available antimicrobial packaging technologies is also presented along with their significant impact on food safety. This article entails various antimicrobial agents for commercial applications, as well as the difference between the use of antimicrobials under laboratory scale and real time applications. Development of resistance amongst microorganisms is considered as a future implication of antimicrobials with an aim to come up with actual efficacies in extension of shelf life as well as reduction in bacterial growth through the upcoming and promising use of antimicrobials in food packaging for the forthcoming research down the line.

  3. Rapid Active Sampling Package

    Science.gov (United States)

    Peters, Gregory

    2010-01-01

    A field-deployable, battery-powered Rapid Active Sampling Package (RASP), originally designed for sampling strong materials during lunar and planetary missions, shows strong utility for terrestrial geological use. The technology is proving to be simple and effective for sampling and processing materials of strength. Although this originally was intended for planetary and lunar applications, the RASP is very useful as a powered hand tool for geologists and the mining industry to quickly sample and process rocks in the field on Earth. The RASP allows geologists to surgically acquire samples of rock for later laboratory analysis. This tool, roughly the size of a wrench, allows the user to cut away swaths of weathering rinds, revealing pristine rock surfaces for observation and subsequent sampling with the same tool. RASPing deeper (.3.5 cm) exposes single rock strata in-situ. Where a geologist fs hammer can only expose unweathered layers of rock, the RASP can do the same, and then has the added ability to capture and process samples into powder with particle sizes less than 150 microns, making it easier for XRD/XRF (x-ray diffraction/x-ray fluorescence). The tool uses a rotating rasp bit (or two counter-rotating bits) that resides inside or above the catch container. The container has an open slot to allow the bit to extend outside the container and to allow cuttings to enter and be caught. When the slot and rasp bit are in contact with a substrate, the bit is plunged into it in a matter of seconds to reach pristine rock. A user in the field may sample a rock multiple times at multiple depths in minutes, instead of having to cut out huge, heavy rock samples for transport back to a lab for analysis. Because of the speed and accuracy of the RASP, hundreds of samples can be taken in one day. RASP-acquired samples are small and easily carried. A user can characterize more area in less time than by using conventional methods. The field-deployable RASP used a Ni

  4. 75 FR 32293 - Nonduplication; Pension, Compensation, and Dependency and Indemnity Compensation; Correction

    Science.gov (United States)

    2010-06-08

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 21 Nonduplication; Pension, Compensation, and Dependency and Indemnity Compensation; Correction AGENCY: Department of Veterans Affairs. ACTION: Correcting amendment. SUMMARY: This document...

  5. Compensating for synaptic loss in Alzheimer's disease.

    Science.gov (United States)

    Abuhassan, Kamal; Coyle, Damien; Belatreche, Ammar; Maguire, Liam

    2014-02-01

    Confirming that synaptic loss is directly related to cognitive deficit in Alzheimer's disease (AD) has been the focus of many studies. Compensation mechanisms counteract synaptic loss and prevent the catastrophic amnesia induced by synaptic loss via maintaining the activity levels of neural circuits. Here we investigate the interplay between various synaptic degeneration and compensation mechanisms, and abnormal cortical oscillations based on a large-scale network model consisting of 100,000 neurons exhibiting several cortical firing patterns, 8.5 million synapses, short-term plasticity, axonal delays and receptor kinetics. The structure of the model is inspired by the anatomy of the cerebral cortex. The results of the modelling study suggest that cortical oscillations respond differently to compensation mechanisms. Local compensation preserves the baseline activity of theta (5-7 Hz) and alpha (8-12 Hz) oscillations whereas delta (1-4 Hz) and beta (13-30 Hz) oscillations are maintained via global compensation. Applying compensation mechanisms independently shows greater effects than combining both compensation mechanisms in one model and applying them in parallel. Consequently, it can be speculated that enhancing local compensation might recover the neural processes and cognitive functions that are associated with theta and alpha oscillations whereas inducing global compensation might contribute to the repair of neural (cognitive) processes which are associated with delta and beta band activity. Compensation mechanisms may vary across cortical regions and the activation of inappropriate compensation mechanism in a particular region may fail to recover network dynamics and/or induce secondary pathological changes in the network.

  6. Prevention policies addressing packaging and packaging waste: Some emerging trends.

    Science.gov (United States)

    Tencati, Antonio; Pogutz, Stefano; Moda, Beatrice; Brambilla, Matteo; Cacia, Claudia

    2016-10-01

    Packaging waste is a major issue in several countries. Representing in industrialized countries around 30-35% of municipal solid waste yearly generated, this waste stream has steadily grown over the years even if, especially in Europe, specific recycling and recovery targets have been fixed. Therefore, an increasing attention starts to be devoted to prevention measures and interventions. Filling a gap in the current literature, this explorative paper is a first attempt to map the increasingly important phenomenon of prevention policies in the packaging sector. Through a theoretical sampling, 11 countries/states (7 in and 4 outside Europe) have been selected and analyzed by gathering and studying primary and secondary data. Results show evidence of three specific trends in packaging waste prevention policies: fostering the adoption of measures directed at improving packaging design and production through an extensive use of the life cycle assessment; raising the awareness of final consumers by increasing the accountability of firms; promoting collaborative efforts along the packaging supply chains. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. 38 CFR 3.351 - Special monthly dependency and indemnity compensation, death compensation, pension and spouse's...

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Special monthly dependency and indemnity compensation, death compensation, pension and spouse's compensation ratings. 3.351 Section 3.351 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension...

  8. 9 CFR 381.144 - Packaging materials.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Packaging materials. 381.144 Section... Packaging materials. (a) Edible products may not be packaged in a container which is composed in whole or in... to health. All packaging materials must be safe for the intended use within the meaning of section...

  9. 77 FR 10358 - Investment Adviser Performance Compensation

    Science.gov (United States)

    2012-02-22

    ... COMMISSION 17 CFR Part 275 RIN 3235-AK71 Investment Adviser Performance Compensation AGENCY: Securities and... ``SEC'') is adopting amendments to the rule under the Investment Advisers Act of 1940 that permits investment advisers to charge performance based compensation to ``qualified clients.'' The amendments...

  10. A brief history of dosage compensation

    Indian Academy of Sciences (India)

    ... postulated the origin of the Y chromosome as having resulted from restricted recombination between homologous sex chromosomes in the male and the accumulation of deleterious mutations. This evolutionary process leads to dosage compensation. This article lays out a brief history of dosage compensation in genetics.

  11. 14 CFR 1253.515 - Compensation.

    Science.gov (United States)

    2010-01-01

    ... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 1253.515 Compensation. A recipient... rates of pay or other compensation; (b) Results in the payment of wages to employees of one sex at a...

  12. 40 CFR 5.515 - Compensation.

    Science.gov (United States)

    2010-07-01

    ... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 5.515 Compensation. A recipient shall... of pay or other compensation; (b) Results in the payment of wages to employees of one sex at a rate...

  13. 15 CFR 8a.515 - Compensation.

    Science.gov (United States)

    2010-01-01

    ... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 8a.515 Compensation. A recipient shall... of pay or other compensation; (b) Results in the payment of wages to employees of one sex at a rate...

  14. 31 CFR 28.515 - Compensation.

    Science.gov (United States)

    2010-07-01

    ... SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 28.515 Compensation. A... in rates of pay or other compensation; (b) Results in the payment of wages to employees of one sex at...

  15. 28 CFR 54.515 - Compensation.

    Science.gov (United States)

    2010-07-01

    ... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 54.515 Compensation. A recipient shall... of pay or other compensation; (b) Results in the payment of wages to employees of one sex at a rate...

  16. Workers’ Compensation Insurance and Occupational Injuries

    Directory of Open Access Journals (Sweden)

    Ilsoon Shin

    2011-06-01

    Conclusion: Private insurance system, fixed flat rate employers’ funding mechanism, and higher coverage of compensation scheme are significantly and positively correlated with lower level of occupational accidents compared with the public insurance system, risk-based funding system, and lower coverage of compensation scheme.

  17. Compensation Services Advisor | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Job Summary The Compensation Services Advisor is accountable for the effective provision of professional advisory services for a full range of compensation and benefits services, including but not limited to insurance, pension, leave, disability management, and termination benefits to head office and foreign employees ...

  18. Engineering Compensations in Web Service Environment

    DEFF Research Database (Denmark)

    Schäfer, Micahel; Dolog, Peter; Nejdl, Wolfgang

    2007-01-01

    in such an environment occurs, a compensation can be initiated to recover from the failure. However, current environments have only limited capabilities for compensations, and are usually based on backward recovery. In this paper, we introduce an engineering approach and an environment to deal with advanced...

  19. 77 FR 5381 - Plum Pox Compensation

    Science.gov (United States)

    2012-02-03

    ... leaves of susceptible Prunus spp.) from quarantined areas to prevent the spread of plum pox virus (PPV... Animal and Plant Health Inspection Service 7 CFR Part 301 RIN 0579-AD58 Plum Pox Compensation AGENCY...: We are amending the plum pox regulations to provide for the payment of compensation to eligible...

  20. Time-varying phase diversity turbulence compensation

    NARCIS (Netherlands)

    Eekeren, A.W.M. van; Schutte, K.; Dijk, J.; Schwering, P.B.W.

    2011-01-01

    Long range object identification needs visual identification over large distances. However, atmospheric turbulence does hinder long range imaging. Therefore it is crucial to compensate the visual artifacts due to atmospheric turbulence. In this paper we propose a new method to compensate these

  1. 45 CFR 86.54 - Compensation.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Compensation. 86.54 Section 86.54 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NONDISCRIMINATION ON THE BASIS OF SEX IN... in Employment in Education Programs or Activities Prohibited § 86.54 Compensation. A recipient shall...

  2. Ownership Concentration, Top Management and Board Compensation

    Directory of Open Access Journals (Sweden)

    Marcos Barbosa Pinto

    2013-05-01

    Full Text Available The degree of ownership concentration may influence executive and board compensation (Bebchuk & Fried, 2003. This article analyzes this relationship. Detailed information about top management and board compensation became available starting in 2010 through new Securities Commission filings. Linear regression models applied to a sample of 315 Brazilian companies traded on the national exchange indicate a negative and statistically significant economic correlation between executive compensation and the degree of ownership concentration. Ceteris paribus, companies with a lower degree of ownership concentration pay higher compensation to top executives. Family controlled companies pay more to their chief executive, but not to the managerial team as a whole, and the compensation of directors increases with a greater proportion of control group members or their relatives on the board. There was support for the Managerial Power Hypothesis in companies with a lower degree of ownership concentration and for the extraction of private benefits in companies where it is greater.

  3. Compensation of Disadvantages in University Examination Procedures

    Directory of Open Access Journals (Sweden)

    Ulrike Quapp

    2016-08-01

    Full Text Available Active social participation of disabled people is one of the major tasks of modern society. That also includes access to the academic community by higher education. Universities all over the world work hard to give handicapped students a chance to graduate. In this context, compensation of disadvantages in examination procedures is an important matter. But, also chronic illness may impair the student's examination performance. To ensure equal examination opportunities for all students, responsible university officials must be creative to find individual compensation solutions. The paper analyzes examination regulations at universities in different countries and offers solutions to compensate disabled and chronic ill students' disadvantages. It discusses the necessity of compensation for different types of disability and chronic illness. Finally, an overview of current German case law and solutions for compensation problems are provided.

  4. Comprehensive Monitor-Oriented Compensation Programming

    Directory of Open Access Journals (Sweden)

    Christian Colombo

    2014-04-01

    Full Text Available Compensation programming is typically used in the programming of web service compositions whose correct implementation is crucial due to their handling of security-critical activities such as financial transactions. While traditional exception handling depends on the state of the system at the moment of failure, compensation programming is significantly more challenging and dynamic because it is dependent on the runtime execution flow — with the history of behaviour of the system at the moment of failure affecting how to apply compensation. To address this dynamic element, we propose the use of runtime monitors to facilitate compensation programming, with monitors enabling the modeller to be able to implicitly reason in terms of the runtime control flow, thus separating the concerns of system building and compensation modelling. Our approach is instantiated into an architecture and shown to be applicable to a case study.

  5. Nanocellulose in green food packaging.

    Science.gov (United States)

    Vilarinho, Fernanda; Sanches Silva, Ana; Vaz, M Fátima; Farinha, José Paulo

    2017-01-26

    The development of packaging materials with new functionalities and lower environmental impact is now an urgent need of our society. On one hand, the shelf-life extension of packaged products can be an answer to the exponential increase of worldwide demand for food. On the other hand, uncertainty of crude oil prices and reserves has imposed the necessity to find raw materials to replace oil-derived polymers. Additionally, consumers' awareness toward environmental issues increasingly pushes industries to look with renewed interest to "green" solutions. In response to these issues, numerous polymers have been exploited to develop biodegradable food packaging materials. Although the use of biopolymers has been limited due to their poor mechanical and barrier properties, these can be enhanced by adding reinforcing nanosized components to form nanocomposites. Cellulose is probably the most used and well-known renewable and sustainable raw material. The mechanical properties, reinforcing capabilities, abundance, low density, and biodegradability of nanosized cellulose make it an ideal candidate for polymer nanocomposites processing. Here we review the potential applications of cellulose based nanocomposites in food packaging materials, highlighting the several types of biopolymers with nanocellulose fillers that have been used to form bio-nanocomposite materials. The trends in nanocellulose packaging applications are also addressed.

  6. The reduction of packaging waste

    Energy Technology Data Exchange (ETDEWEB)

    Raney, E.A.; Hogan, J.J.; McCollom, M.L.; Meyer, R.J.

    1994-04-01

    Nationwide, packaging waste comprises approximately one-third of the waste disposed in sanitary landfills. the US Department of Energy (DOE) generated close to 90,000 metric tons of sanitary waste. With roughly one-third of that being packaging waste, approximately 30,000 metric tons are generated per year. The purpose of the Reduction of Packaging Waste project was to investigate opportunities to reduce this packaging waste through source reduction and recycling. The project was divided into three areas: procurement, onsite packaging and distribution, and recycling. Waste minimization opportunities were identified and investigated within each area, several of which were chosen for further study and small-scale testing at the Hanford Site. Test results, were compiled into five ``how-to`` recipes for implementation at other sites. The subject of the recipes are as follows: (1) Vendor Participation Program; (2) Reusable Containers System; (3) Shrink-wrap System -- Plastic and Corrugated Cardboard Waste Reduction; (4) Cardboard Recycling ; and (5) Wood Recycling.

  7. Package power stations for export

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    The cheap and efficient generation of power is an essential requirement for the success and prosperity of any community and is especially important to third world countries. It is therefore logical that the more technologically advanced nations should seek to produce power stations for the developing countries. Power plant can now be designed into a packaged form that may be readily exported and commissioned. This valuable and interesting collection of papers were originally presented at a seminar organised by the Power Industries Division of the Institution of Mechanical Engineers. Topics considered include the developing world market for packaged power stations using indigenous fuels; multi-fuel systems for power generation; packaging, modularisation, and containerisation of equipment for power boilers for export; compact coal-fired industrial plant; rural woodburning power stations; biomass gasification based power generation technology and potential; gas fed reciprocating engine development; packaged heavy duty gas turbines for power generation; and criteria for assessing the appropriateness of package power technologies in developing countries.

  8. Package inspection using inverse diffraction

    Science.gov (United States)

    McAulay, Alastair D.

    2008-08-01

    More efficient cost-effective hand-held methods of inspecting packages without opening them are in demand for security. Recent new work in TeraHertz sources,1 millimeter waves, presents new possibilities. Millimeter waves pass through cardboard and styrofoam, common packing materials, and also pass through most materials except those with high conductivity like metals which block light and are easily spotted. Estimating refractive index along the path of the beam through the package from observations of the beam passing out of the package provides the necessary information to inspect the package and is a nonlinear problem. So we use a generalized linear inverse technique that we first developed for finding oil by reflection in geophysics.2 The computation assumes parallel slices in the packet of homogeneous material for which the refractive index is estimated. A beam is propagated through this model in a forward computation. The output is compared with the actual observations for the package and an update computed for the refractive indices. The loop is repeated until convergence. The approach can be modified for a reflection system or to include estimation of absorption.

  9. Standardised Packaging of Tobacco Products Evidence Review

    OpenAIRE

    Department of Health (Ireland)

    2014-01-01

    The current report reviews the scientific evidence on standardised or “plain” packaging, and the extent to which plain packaging regulations would help Ireland to achieve its tobacco control objectives.   Plain packaging is a form of marketing restriction that prohibits the use of logos, colours, brand images and promotional information on tobacco packaging. Under plain packaging regulations, the colour of the pack is uniform across different brands and varieties. Regulations ma...

  10. Advanced organics for electronic substrates and packages

    CERN Document Server

    Fletcher, Andrew E

    1992-01-01

    Advanced Organics for Electronic Substrates and Packages provides information on packaging, which is one of the most technologically intensive activities in the electronics industry. The electronics packaging community has realized that while semiconductor devices continue to be improved upon for performance, cost, and reliability, it is the interconnection or packaging of these devices that will limit the performance of the systems. Technology must develop packaging for transistor chips, with high levels of performance and integration providing cooling, power, and interconnection, and yet pre

  11. Semiconductor packaging materials interaction and reliability

    CERN Document Server

    Chen, Andrea

    2012-01-01

    In semiconductor manufacturing, understanding how various materials behave and interact is critical to making a reliable and robust semiconductor package. Semiconductor Packaging: Materials Interaction and Reliability provides a fundamental understanding of the underlying physical properties of the materials used in a semiconductor package. The book focuses on an important step in semiconductor manufacturing--package assembly and testing. It covers the basics of material properties and explains how to determine which behaviors are important to package performance. The authors also discuss how

  12. The paradox of packaging optimization – a characterization of packaging source reduction in the Netherlands

    NARCIS (Netherlands)

    van Sluisveld, M.A.E.; Worrell, E.|info:eu-repo/dai/nl/106856715

    2013-01-01

    The European Council Directive 94/62/EC for Packaging and Packaging Waste requires that Member States implement packaging waste prevention measures. However, consumption and subsequently packaging waste figures are still growing annually. It suggests that policies to accomplish packaging waste

  13. Compensation following bilateral vestibular damage

    Directory of Open Access Journals (Sweden)

    Bill J Yates

    2011-12-01

    Full Text Available Bilateral loss of vestibular inputs affects far fewer patients than unilateral inner ear damage, and thus has been understudied. In both animal subjects and human patients, bilateral vestibular hypofunction (BVH produces a variety of clinical problems, including impaired balance control, inability to maintain stable blood pressure during postural changes, difficulty in visual targeting of images, and disturbances in spatial memory and navigational performance. Experiments in animals have shown that nonlabyrinthine inputs to the vestibular nuclei are rapidly amplified following the onset of BVH, which may explain the recovery of postural stability and orthostatic tolerance that occurs within 10 days. However, the loss of the vestibulo-ocular reflex and degraded spatial cognition appear to be permanent in animals with BVH. Current concepts of the compensatory mechanisms in humans with BVH are largely inferential, as there is a lack of data from patients early in the disease process. Translation of animal studies of compensation for BVH into therapeutic strategies and subsequent application in the clinic is the most likely route to improve treatment. In addition to physical therapy, two types of prosthetic devices have been proposed to treat individuals with bilateral loss of vestibular inputs: those that provide tactile stimulation to indicate body position in space, and those that deliver electrical stimuli to branches of the vestibular nerve in accordance with head movements. The relative efficacy of these two treatment paradigms, and whether they can be combined to facilitate recovery, is yet to be ascertained.

  14. Compensation following bilateral vestibular damage.

    Science.gov (United States)

    McCall, Andrew A; Yates, Bill J

    2011-01-01

    Bilateral loss of vestibular inputs affects far fewer patients than unilateral inner ear damage, and thus has been understudied. In both animal subjects and human patients, bilateral vestibular hypofunction (BVH) produces a variety of clinical problems, including impaired balance control, inability to maintain stable blood pressure during postural changes, difficulty in visual targeting of images, and disturbances in spatial memory and navigational performance. Experiments in animals have shown that non-labyrinthine inputs to the vestibular nuclei are rapidly amplified following the onset of BVH, which may explain the recovery of postural stability and orthostatic tolerance that occurs within 10 days. However, the loss of the vestibulo-ocular reflex and degraded spatial cognition appear to be permanent in animals with BVH. Current concepts of the compensatory mechanisms in humans with BVH are largely inferential, as there is a lack of data from patients early in the disease process. Translation of animal studies of compensation for BVH into therapeutic strategies and subsequent application in the clinic is the most likely route to improve treatment. In addition to physical therapy, two types of prosthetic devices have been proposed to treat individuals with bilateral loss of vestibular inputs: those that provide tactile stimulation to indicate body position in space, and those that deliver electrical stimuli to branches of the vestibular nerve in accordance with head movements. The relative efficacy of these two treatment paradigms, and whether they can be combined to facilitate recovery, is yet to be ascertained.

  15. Flexible packaging for PV modules

    Science.gov (United States)

    Dhere, Neelkanth G.

    2008-08-01

    Economic, flexible packages that provide needed level of protection to organic and some other PV cells over >25-years have not yet been developed. However, flexible packaging is essential in niche large-scale applications. Typical configuration used in flexible photovoltaic (PV) module packaging is transparent frontsheet/encapsulant/PV cells/flexible substrate. Besides flexibility of various components, the solder bonds should also be flexible and resistant to fatigue due to cyclic loading. Flexible front sheets should provide optical transparency, mechanical protection, scratch resistance, dielectric isolation, water resistance, UV stability and adhesion to encapsulant. Examples are Tefzel, Tedlar and Silicone. Dirt can get embedded in soft layers such as silicone and obscure light. Water vapor transmittance rate (WVTR) of polymer films used in the food packaging industry as moisture barriers are ~0.05 g/(m2.day) under ambient conditions. In comparison, light emitting diodes employ packaging components that have WVTR of ~10-6 g/(m2.day). WVTR of polymer sheets can be improved by coating them with dense inorganic/organic multilayers. Ethylene vinyl acetate, an amorphous copolymer used predominantly by the PV industry has very high O2 and H2O diffusivity. Quaternary carbon chains (such as acetate) in a polymer lead to cleavage and loss of adhesional strength at relatively low exposures. Reactivity of PV module components increases in presence of O2 and H2O. Adhesional strength degrades due to the breakdown of structure of polymer by reactive, free radicals formed by high-energy radiation. Free radical formation in polymers is reduced when the aromatic rings are attached at regular intervals. This paper will review flexible packaging for PV modules.

  16. Plastic food packaging and health

    OpenAIRE

    Raika Durusoy; Ali Osman Karababa

    2011-01-01

    Plastics have a wide usage in our daily lives. One of their uses is for food packaging and food containers. The aim of this review is to introduce different types of chemicals that can leach from food packaging plastics into foods and cause human exposure and to mention their effects on health. The types of plastics were reviewed under the 13 headings in Turkish Codex Alimentarius and plastics recycling symbols were provided to enable the recognition of the type of plastic when applicable. Ch...

  17. GNS-12 Packaging design criteria

    Energy Technology Data Exchange (ETDEWEB)

    Clements, E.P., Westinghouse Hanford

    1996-07-24

    The purpose of this Packaging Design Criteria (PDC) is to provide criteria for the Safety Analysis Report for Packaging (SARP)(Onsite). The SARP provides the evaluation to demonstrate that the onsite transportation safety criteria are met for the transport and storage of the 324 Building vitrified encapsulated material in the GNS-12 cask. In this application, the approved PDC provides a formal set of standards for the payload requirements, and guidance for the current cask transport configuration and a revised storage seal and primary lid modification design.

  18. Family of Packaged Water/Packaged Water System

    Science.gov (United States)

    1994-03-01

    equipment were surveyed. These companies were selected from: a. Thomas Register - Pharmaceutical , Blood Processing Equipment, and Intravenous Equipment...Engineering Center, ASTM- CCM , Fort Lee, VA. 4. U.S. Army Quartermaster Center and School. 1992. Draft Study Plan for the Packaged Water System

  19. Compensator configurations for load currents' symmetrization

    Science.gov (United States)

    Rusinaru, D.; Manescu, L. G.; Dinu, R. C.

    2016-02-01

    This paper approaches aspects regarding the mitigation effects of asymmetries in 3-phase 3-wire networks. The measure consisting in connecting of load current symmetrization devices at the load coupling point is presented. A time-variation of compensators parameters is determined as a function of the time-recorded electrical values. The general sizing principle of the load current symmetrization reactive components is based on a simple equivalent model of the unbalanced 3-phase loads. By using these compensators a certain control of the power components transits is ensured in the network. The control is based on the variations laws of the compensators parameters as functions of the recorded electrical values: [B] = [T]·[M]. The link between compensator parameters and measured values is ensured by a transformation matrix [T] for each operation conditions of the supply network. Additional conditions for improving of energy and efficiency performance of the compensator are considered: i.e. reactive power compensation. The compensator sizing algorithm was implemented into a MATLAB environment software, which generate the time-evolution of the parameters of load current symmetrization device. The input data of application takes into account time-recording of the electrical values. By using the compensator sizing software, some results were achieved for the case of a consumer connected at 20 kV busbar of a distribution substation, during 24 hours measurement session. Even the sizing of the compensators aimed some additional network operation aspects (power factor correction) correlated with the total or major load symmetrizations, the harmonics aspects of the network values were neglected.

  20. 38 CFR 3.708 - Federal Employees' Compensation.

    Science.gov (United States)

    2010-07-01

    ... ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation Concurrent Benefits and Elections..., hospitalization or hospital care, training, or compensated work therapy program. See §§ 3.358 and 3.361. (b...

  1. Intelligent food packaging - research and development

    Directory of Open Access Journals (Sweden)

    Renata Dobrucka

    2015-03-01

    Full Text Available Packaging also fosters effective marketing of the food through distribution and sale channels. It is of the utmost importance to optimize the protection of the food, a great quality and appearance - better than typical packaged foods. In recent years, intelligent packaging became very popular. Intelligent packaging is becoming more and more widely used for food products. Application of this type of solution contributes to improvement of the quality consumer life undoubtedly. Intelligent packaging refers to a package that can sense environmental changes, and in turn, informs the users about the changes. These packaging systems contain devices that are capable of sensing and providing information about the functions and properties of the packaged foods. Also, this paper will review intelligent packaging technologies and describe different types of indicators (time-temperature indicators, freshness indicators.

  2. Health Insurance Costs and Employee Compensation: Evidence from the National Compensation Survey.

    Science.gov (United States)

    Anand, Priyanka

    2016-12-27

    This paper examines the relationship between rising health insurance costs and employee compensation. I estimate the extent to which total compensation decreases with a rise in health insurance costs and decompose these changes in compensation into adjustments in wages, non-health fringe benefits, and employee contributions to health insurance premiums. I examine this relationship using the National Compensation Survey, a panel dataset on compensation and health insurance for a sample of establishments across the USA. I find that total hourly compensation reduces by $0.52 for each dollar increase in health insurance costs. This reduction in total compensation is primarily in the form of higher employee premium contributions, and there is no evidence of a change in wages and non-health fringe benefits. These findings show that workers are absorbing at least part of the increase in health insurance costs through lower compensation and highlight the importance of examining total compensation, and not just wages, when examining the relationship between health insurance costs and employee compensation. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  3. Assessing Information on Food Packages

    DEFF Research Database (Denmark)

    Clement, Jesper; Smith, Viktor; Zlatev, Jordan

    2017-01-01

    Purpose: This paper presents an experimental study which aims at assessing the potentially misleading effect of graphic elements on food packaging. We call these elements potentially misleading elements (PMEs) as they can give customers false expectations. They are either (a) highlighted numerical...

  4. Annual Symposium in Electronics Packaging

    CERN Document Server

    1991-01-01

    Each May, the Continuing Education Division of the T.J.Watson School of Engineering, Applied Science and Technology at the State University of New York at Binghamton sponsors an Annual Symposium in Electronics Packaging in cooperation with local professional societies (IEEE, ASME, SME, IEPS) and UnlPEG (the University-Industry Partnership for Economic Growth.) Each volume of this Electronics Packaging Forum series is based on the the preceding Symposium, with Volume Two based on the 1990 presentations. The Preface to Volume One included a brief definition of the broad scope of the electronics packaging field with some comments on why it has recently assumed such a more prominent priority for research and development. Those remarks will not be repeated here; at this point it is assumed that the reader is a professional in the packaging field, or possibly a student of one of the many academic disciplines which contribute to it. It is worthwhile repeating the series objectives, however, so the reader will be cle...

  5. The ssWavelets package

    Science.gov (United States)

    Jeffrey H. Gove

    2017-01-01

    This package adds several classes, generics and associated methods as well as a few various functions to help with wavelet decomposition of sampling surfaces generated using sampSurf. As such, it can be thought of as an extension to sampSurf for wavelet analysis.

  6. Food Nanotechnology - Food Packaging Applications

    Science.gov (United States)

    Astonishing growth in the market for nanofoods is predicted in the future, from the current market of $2.6 billion to $20.4 billion in 2010. The market for nanotechnology in food packaging alone is expected to reach $360 million in 2008. In large part, the impetus for this predicted growth is the ...

  7. Hanford Site radioactive hazardous materials packaging directory

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, T.L.

    1995-12-01

    The Hanford Site Radioactive Hazardous Materials Packaging Directory (RHMPD) provides information concerning packagings owned or routinely leased by Westinghouse Hanford Company (WHC) for offsite shipments or onsite transfers of hazardous materials. Specific information is provided for selected packagings including the following: general description; approval documents/specifications (Certificates of Compliance and Safety Analysis Reports for Packaging); technical information (drawing numbers and dimensions); approved contents; areas of operation; and general information. Packaging Operations & Development (PO&D) maintains the RHMPD and may be contacted for additional information or assistance in obtaining referenced documentation or assistance concerning packaging selection, availability, and usage.

  8. SMART PACKAGING FOR FOOD PRESERVATION

    Directory of Open Access Journals (Sweden)

    Raquel Rodríguez-Sauceda

    2014-07-01

    Full Text Available One of the biggest challenges of the food industry is the preservation of its products, that is, to prevent them from being attacked by microorganisms that decompose them hauling economic losses and severe health damage to the consumer. Today, competition in the food industry is very high and any company that does not offer the quality products is doomed to fail. Consumers demand more and the industry still stands offering what is asked: quality, security and safety. The package, in addition to fulfilling its core functions is becoming a means of sophisticated interactions with content and a record of relevant information for both the end consumer and intermediate players in the value chain and concepts are born of active and intelligent packaging. A smart container is defined as a system that monitors the condition of the packaged product, being able to register and provide information about product quality or condition of the container, showing the possible "abnormal" practices that have suffered the product or the container during the entire supply chain, such as transportation or storage. These systems monitor the mechanisms of altered food due to physiological, chemical and biological processes that respond and communicate changes in the status of the product as time-temperature, Oxygen, Carbon dioxide, microbial growth, etc. There are different types of smart packaging such as time-temperature indicators, color indicators, indicators of pathogens and indicators of leaks, to name a few. Through literature review, arguments that demonstrate the usefulness and necessity of the use of smart packaging to preserve the quality and safety of the product it contains, from manufacturing to the time it is used by consumers were found, as these besides communicating or providing information about their state, acting as a marketing tool.

  9. Plastic food packaging and health

    Directory of Open Access Journals (Sweden)

    Raika Durusoy

    2011-02-01

    Full Text Available Plastics have a wide usage in our daily lives. One of their uses is for food packaging and food containers. The aim of this review is to introduce different types of chemicals that can leach from food packaging plastics into foods and cause human exposure and to mention their effects on health. The types of plastics were reviewed under the 13 headings in Turkish Codex Alimentarius and plastics recycling symbols were provided to enable the recognition of the type of plastic when applicable. Chemicals used during the production and that can cause health risks are investigated under the heading of the relevant type of plastic. The most important chemicals from plastic food packaging that can cause toxicity are styrene, 1,3-butadiene, melamine, formaldehyde, acrylamide, di-2-ethylhexyl phthalate, di-2-ethylhexyl adipate, vinyl chloride and bisphenol A. These chemicals have endocrine disrupting, carcinogenic and/or development disrupting effects. These chemicals may leach into foods depending on the chemical properties of the plastic or food, temperature during packaging, processing and storage, exposure to UV and duration of storage. Contact with fatty/oily or acidic foods, heating of the food inside the container, or drinking hot drinks from plastic cups, use of old and scratched plastics and some detergents increase the risk of leaching. The use of plastic containers and packaging for food and beveradges should be avoided whenever possible and when necessary, less harmful types of plastic should be preferred. [TAF Prev Med Bull 2011; 10(1.000: 87-96

  10. voltage compensation using artificial neural network

    African Journals Online (AJOL)

    Offor Theophilos

    VOLTAGE COMPENSATION USING ARTIFICIAL NEURAL NETWORK: A CASE STUDY OF. RUMUOLA ... using artificial neural network (ANN) controller based dynamic voltage restorer (DVR). ... substation by simulating with sample of average voltage for Omerelu, Waterlines, Rumuola, Shell Industrial and Barracks.

  11. Calculating Employee Compensation Using An Economic Principle

    National Research Council Canada - National Science Library

    Puneet Jaiprakash

    2015-01-01

    .... This paper develops an intuitive method for calculating the minimum amount by which an employee's compensation must be adjusted taking into account changes in economic conditions since the start of employment...

  12. Comprehensive Environmental Response, Compensation and Liability Act

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), commonly known as Superfund, provides a federal "superfund" to clean up...

  13. 33 CFR 136.241 - Compensation allowable.

    Science.gov (United States)

    2010-07-01

    ... Section 136.241 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL SPILL LIABILITY TRUST FUND; CLAIMS... provided by the State or political subdivision. ...

  14. RF inhomogeneity compensation in structural brain imaging

    National Research Council Canada - National Science Library

    Deichmann, R; Good, C.D; Turner, R

    2002-01-01

    .... It is shown experimentally that images acquired with the compensation pulse may be segmented without using intensity correction algorithms during data postprocessing. Magn Reson Med 47:398–402, 2002. © 2002 Wiley‐Liss, Inc.

  15. Integrated open source mine workers compensation system

    CSIR Research Space (South Africa)

    Coetzee, L

    2006-08-01

    Full Text Available This article describes the Mine Workers Compensation System developed by the CSIR and Molepe Consulting for the South African Department of Health. Mining activities increase the risk of certain occupational lung diseases. South African legislation...

  16. Executive Compensation as an Agency Problem

    National Research Council Canada - National Science Library

    Arye Bebchuk, Lucian; Fried, Jesse M

    2003-01-01

    .... Under this approach, the design of executive compensation is viewed not only as an instrument for addressing the agency problem between managers and shareholders but also as part of the agency problem itself...

  17. Comprehensive Environmental Response, Compensation and Liability Act

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data represents geographic terms used within the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). CERCLA, commonly known as...

  18. Executive Compensation and Misconduct: Environmental Harm

    OpenAIRE

    Minor, Dylan Blu

    2016-01-01

    We explore the relationship between managerial incentives and misconduct using the setting of environmental harm. We find that high powered executive compensation can increase the odds of environmental law-breaking by 40-60% and the magnitude of environmental harm by over 100%. We document similar results for the setting of executive compensation and illegal financial accounting. Finally, we outline some managerial and policy implications to blunt these adverse incentive effects.

  19. Reversible thyristor converters of brushless synchronous compensators

    Directory of Open Access Journals (Sweden)

    А.М.Galynovskiy

    2013-12-01

    Full Text Available Behavior of models of three-phase-to-single-phase rotary reversible thyristor converters of brushless synchronous compensators in a circuit simulation system is analyzed. It is shown that combined control mode of opposite-connected thyristors may result in the exciter armature winding short circuits both at the thyristor feed-forward and lagging current delay angles. It must be taken into consideration when developing brushless compensator excitation systems.

  20. Executive Compensation as an Agency Problem

    OpenAIRE

    Lucian A. Bebchuk; Fried, Jesse M.

    2003-01-01

    This paper provides an overview of the main theoretical elements and empirical underpinnings of a "managerial power" approach to executive compensation. Under this approach, the design of executive compensation is viewed not only as an instrument for addressing the agency problem between managers and shareholders but also as part of the agency problem itself. Boards of publicly traded companies with dispersed ownership, we argue, cannot be expected to bargain at arm's length with managers. As...

  1. Reactive power compensation a practical guide

    CERN Document Server

    Hofmann, Wolfgang; Just, Wolfgang

    2012-01-01

    The comprehensive resource on reactive power compensation, presenting the design, application and operation of reactive power equipment and installations The area of reactive power compensation is gaining increasing importance worldwide. If suitably designed, it is capable of improving voltage quality significantly, meaning that losses in equipment and power systems are reduced, the permissible loading of equipment can be increased, and the over-all stability of system operation improved. Ultimately, energy use and CO2 emisson are reduced. This unique guide discusses the

  2. Geographical relationships and CEO compensation contracts

    OpenAIRE

    Junli Yu; Wei Xu; Ping Zhang

    2017-01-01

    In this paper, we empirically analyze the effects that the geographical relationships between chairman and CEO have on the latter’s compensation contracts, based on samples of listed A-share private firms from 2005 to 2014. We find that geographical relationships are related to lower pay–performance sensitivity, and that the correlation mainly exists in poor performance periods, suggesting that geographical relationships weaken the effectiveness of compensation contracts. We also find that ge...

  3. Environmental change, phenotypic plasticity, and genetic compensation.

    Science.gov (United States)

    Grether, Gregory F

    2005-10-01

    When a species encounters novel environmental conditions, some phenotypic characters may develop differently than in the ancestral environment. Most environmental perturbations of development are likely to reduce fitness, and thus selection would usually be expected to favor genetic changes that restore the ancestral phenotype. I propose the term "genetic compensation" to refer to this form of adaptive evolution. Genetic compensation is a subset of genetic accommodation and the reverse of genetic assimilation. When genetic compensation has occurred along a spatial environmental gradient, the mean trait values of populations in different environments may be more similar in the field than when representatives of the same populations are raised in a common environment (i.e., countergradient variation). If compensation is complete, genetic divergence between populations may be cryptic, that is, not detectable in the field. Here I apply the concept of genetic compensation to three examples involving carotenoid-based sexual coloration and then use these and other examples to discuss the concept in a broader context. I show that genetic compensation may lead to a cryptic form of reproductive isolation between populations evolving in different environments, may explain some puzzling cases in which heritable traits exposed to strong directional selection fail to show the expected evolutionary response, and may complicate efforts to monitor populations for signs of environmental deterioration.

  4. Goniometer crosstalk compensation for knee joint applications.

    Science.gov (United States)

    de Oliveira Sato, Tatiana; Hansson, Gert-Åke; Coury, Helenice Jane Cote Gil

    2010-01-01

    Electrogoniometers are prone to crosstalk errors related to endblocks rotation (general crosstalk) and to the characteristics of each sensor (individual crosstalk). The aim of this study was to assess the crosstalk errors due to endblock misalignments and to propose a procedure to compensate for these errors in knee applications. A precision jig was used to simulate pure ± 100° flexion/extension movements. A goniometer was mounted with various degrees of valgus/varus (± 20°) and rotation (± 30°) misalignments. For valgus/varus misalignments, although offset compensation eliminated the error in the valgus/varus recordings for 0° of flexion/extension and reduced it to a few degrees for small (± 30°) flexion/extension angles (root mean square error = 1.1°), the individual crosstalk caused pronounced errors for large (± 100°) angles (18.8°). Subsequent compensation for this crosstalk reduced these errors to 0.8° and 4.5°, respectively. For rotational misalignment, compensation for the general crosstalk by means of coordinate system rotation, in combination with compensation for the individual crosstalk, reduced the errors for small (± 30°) and large (± 100°) flexion/extension angles from 3.6° to 0.5° and from 15.5° to 2.4°, respectively. Crosstalk errors were efficiently compensated by the procedures applied, which might be useful in preprocessing of knee functional data, thereby substantially improving goniometer accuracy.

  5. Space charge compensation in the Linac4 low energy beam transport line with negative hydrogen ions.

    Science.gov (United States)

    Valerio-Lizarraga, Cristhian A; Lallement, Jean-Baptiste; Leon-Monzon, Ildefonso; Lettry, Jacques; Midttun, Øystein; Scrivens, Richard

    2014-02-01

    The space charge effect of low energy, unbunched ion beams can be compensated by the trapping of ions or electrons into the beam potential. This has been studied for the 45 keV negative hydrogen ion beam in the CERN Linac4 Low Energy Beam Transport using the package IBSimu [T. Kalvas et al., Rev. Sci. Instrum. 81, 02B703 (2010)], which allows the space charge calculation of the particle trajectories. The results of the beam simulations will be compared to emittance measurements of an H(-) beam at the CERN Linac4 3 MeV test stand, where the injection of hydrogen gas directly into the beam transport region has been used to modify the space charge compensation degree.

  6. Space charge compensation in the Linac4 low energy beam transport line with negative hydrogen ions

    Energy Technology Data Exchange (ETDEWEB)

    Valerio-Lizarraga, Cristhian A., E-mail: cristhian.alfonso.valerio.lizarraga@cern.ch [CERN, Geneva (Switzerland); Departamento de Investigación en Física, Universidad de Sonora, Hermosillo (Mexico); Lallement, Jean-Baptiste; Lettry, Jacques; Scrivens, Richard [CERN, Geneva (Switzerland); Leon-Monzon, Ildefonso [Facultad de Ciencias Fisico-Matematicas, Universidad Autónoma de Sinaloa, Culiacan (Mexico); Midttun, Øystein [CERN, Geneva (Switzerland); University of Oslo, Oslo (Norway)

    2014-02-15

    The space charge effect of low energy, unbunched ion beams can be compensated by the trapping of ions or electrons into the beam potential. This has been studied for the 45 keV negative hydrogen ion beam in the CERN Linac4 Low Energy Beam Transport using the package IBSimu [T. Kalvas et al., Rev. Sci. Instrum. 81, 02B703 (2010)], which allows the space charge calculation of the particle trajectories. The results of the beam simulations will be compared to emittance measurements of an H{sup −} beam at the CERN Linac4 3 MeV test stand, where the injection of hydrogen gas directly into the beam transport region has been used to modify the space charge compensation degree.

  7. The impact of packaging on product competition

    Directory of Open Access Journals (Sweden)

    Maryam Masoumi

    2012-09-01

    Full Text Available The primary objective of this paper is to detect important factors, which are influencing competitive advantage. The proposed model of this paper uses sampling technique to measure characteristics of society. There are eight independent variables for the proposed study of this paper including packaging endurance, easy distribution, customer promotion through packaging, packaging structure, packaging as silent advertiser, diversity of packaging, clean and healthy packaging and innovation in packaging. The proposed study uses structural equation modeling to either accept or reject all hypotheses associated with the proposed study of this paper. The population of this study includes all managers and experts who are involved in packaging products. We used simple sampling technique and chooses 300 from a population of 450 people who are considered as the population of this survey. Cronbach alpha was determined as 0.732, which is above the minimum acceptable level. The results confirm that all mentioned factors influence competitiveness, effectively.

  8. Integrated Approach to Industrial Packaging Design

    Science.gov (United States)

    Vorobeva, O.

    2017-11-01

    The article reviews studies in the field of industrial packaging design. The major factors which influence technological, ergonomic, economic and ecological features of packaging are established. The main modern trends in packaging design are defined, the principles of marketing communications and their influence on consumers’ consciousness are indicated, and the function of packaging as a transmitter of brand values is specified. Peculiarities of packaging technology and printing techniques in modern printing industry are considered. The role of designers in the stage-by-stage development of the construction, form and graphic design concept of packaging is defined. The examples of authentic packaging are given and the mention of the tetrahedron packaging history is made. At the end of the article, conclusions on the key research aspects are made.

  9. Automated packaging employing real-time vision

    Science.gov (United States)

    Chang, Wen-Chung; Wu, Chia-Hung

    2016-07-01

    Existing packaging systems rely on human operation to position a box in the packaging device perform do the packaging task. Current facilities are not capable of handling boxes with different sizes in a flexible way. In order to improve the above-mentioned problems, an eye-to-hand visual servo automated packaging approach is proposed in this paper. The system employs two cameras to observe the box and the gripper mounted on the robotic manipulator to precisely control the manipulator to complete the packaging task. The system first employs two-camera vision to determine the box pose. With appropriate task encoding, a closed-loop visual servoing controller is designed to drive a manipulator to accomplish packaging tasks. The proposed approach can be used to complete automated packaging tasks in the case of uncertain location and size of the box. The system has been successfully validated by experimenting with an industrial robotic manipulator for postal box packaging.

  10. Packaging glass with hierarchically nanostructured surface

    KAUST Repository

    He, Jr-Hau

    2017-08-03

    An optical device includes an active region and packaging glass located on top of the active region. A top surface of the packaging glass includes hierarchical nanostructures comprised of honeycombed nanowalls (HNWs) and nanorod (NR) structures extending from the HNWs.

  11. GRIP LIGHTNING INSTRUMENT PACKAGE (LIP) V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The GRIP Lightning Instrument Package (LIP) dataset was collected by the Lightning Instrument Package (LIP), which consists of 6 rotating vane type electric field...

  12. Multimedia package for LRFD concrete bridge design.

    Science.gov (United States)

    2009-02-01

    This Project developed a Load and Resistance Factor Design (LRFD) multimedia package to provide a practical introduction and an in-depth understanding of the technological advances in the design of concrete bridges. This package can be used to train ...

  13. 7 CFR 33.6 - Package.

    Science.gov (United States)

    2010-01-01

    ... the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... ISSUED UNDER AUTHORITY OF THE EXPORT APPLE ACT Definitions § 33.6 Package. Package means any container of apples. ...

  14. Development in the Active Packaging of Foods

    African Journals Online (AJOL)

    Active packaging is one of the innovative food packaging concepts that has been introduced as a ... dioxide, flavours/odours and those which release carbon dioxide, .... potential risk could be accidental .... moulds and aerobic bacteria.

  15. Sensory impacts of food-packaging interactions.

    Science.gov (United States)

    Duncan, Susan E; Webster, Janet B

    2009-01-01

    Sensory changes in food products result from intentional or unintentional interactions with packaging materials and from failure of materials to protect product integrity or quality. Resolving sensory issues related to plastic food packaging involves knowledge provided by sensory scientists, materials scientists, packaging manufacturers, food processors, and consumers. Effective communication among scientists and engineers from different disciplines and industries can help scientists understand package-product interactions. Very limited published literature describes sensory perceptions associated with food-package interactions. This article discusses sensory impacts, with emphasis on oxidation reactions, associated with the interaction of food and materials, including taints, scalping, changes in food quality as a function of packaging, and examples of material innovations for smart packaging that can improve sensory quality of foods and beverages. Sensory evaluation is an important tool for improved package selection and development of new materials.

  16. Globalization and Localization of the Management Control System package

    DEFF Research Database (Denmark)

    Toldbod, Thomas; Israelsen, Poul

    2015-01-01

    Through an empirical case study, this article examines the operation of multiple management control systems as a package in a Danish manufacturing company. The analysis focuses on four different management control systems – cybernetic controls, planning controls, reward controls, and administrative...... controls – through the theoretical lens of globalization, localization, and glocalization. Based on a single-case study, the analysis documents that these different management control systems are affected differently by the processes of globalization and localization, some of which are universal throughout...... the organization and others have more particular characteristics. Specifically, this study finds that cybernetic controls and administrative controls are designed as global management control systems. Planning controls and reward and compensation controls are glocal systems. The finding leads to the conclusion...

  17. Introducing Experience Goals into Packaging Design

    OpenAIRE

    Joutsela, Markus; Roto, Virpi; Lloyd, Peter; Bohemia, Erik

    2016-01-01

    Consumer experiences are an increasingly important driving force for commerce, affecting also packaging design. Yet, experience design for packages is rarely studied. Specifically, there is a gap in research regarding the integration of experiential goals, Xgoals, into the packaging design process. Open questions include how to describe Xgoals in design briefs when package design is outsourced, how to deal with changes during the design process, and how to evaluate whether the delivered desig...

  18. Comparison of environmental sustainability of pharmaceutical packaging

    OpenAIRE

    Geo Raju; Prabir Sarkar; Ekta Singla; Harpreet Singh; Rachit Kumar Sharma

    2016-01-01

    Pharmaceutical companies are increasingly imparting a lot of importance on becoming more sustainable by developing medicines that are having same medicinal value but with reduced environmental impact. Type of packaging of tablets affects the emission generated during packaging of medicines. Selection of an appropriate packaging of medicine also influences the emission added to the environment. This paper aims at the comparison of environmental impacts of two different types of packaging of ta...

  19. Developments in the active packaging of foods

    NARCIS (Netherlands)

    Vermeiren, L.; Devlieghere, F.; Beest, M. van; Kruijf, N. de; Debevere, J.

    1999-01-01

    Active packaging is one of the innovative food packaging concepts that has been introduced as a response to the continuous changes in current consumer demands and market trends. Major active packaging techniques are concerned with substances that absorb oxygen, ethylene, moisture, carbon dioxide,

  20. 9 CFR 317.24 - Packaging materials.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Packaging materials. 317.24 Section... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS General § 317.24 Packaging materials... packaging materials must be safe for their intended use within the meaning of section 409 of the Federal...

  1. Packaging of Sin Goods - Commitment or Exploitation?

    DEFF Research Database (Denmark)

    Nafziger, Julia

    to such self-control problems, and possibly exploit them, by offering different package sizes. In a competitive market, either one or three (small, medium and large) packages are offered. In contrast to common intuition, the large, and not the small package is a commitment device. The latter serves to exploit...

  2. 27 CFR 30.43 - Packaged spirits.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Packaged spirits. 30.43... Packaged spirits. When the quantity of spirits (including denatured spirits when gauged by weight) in... by weighing each package on an accurate weighing beam or platform scale having a beam or dial showing...

  3. Consumer perception: attributes considered important in packaging

    Directory of Open Access Journals (Sweden)

    Nara Medianeira Stefano

    2012-08-01

    Full Text Available Packaging has been considered the main vehicle for sales, brand building and product identity, since it is the first contact with the product that the consumer has, it is fundamental when choosing and buying a product. In this sense, the packaging is a silent salesperson, because it is up to the package to attract attention, create interest and desire, show the quality of the product and close the sale within seconds. Packaging has contributed to corporate communication with consumers; it provides product protection, storage and convenience, as products move through the value chain. Thinking about it, the product cannot be planned separately from its packaging, and it should not be defined based only on engineering, marketing, communications or economics. The packaging concept has expanded and gained product status; packaging is able to communicate the same language of convenience wherever it goes. Today, packaging industries are taking advantage of this opportunity to differentiate their products through packaging, finding that it is not enough for the package to be beautiful, unbreakable, or preserve the flavor and freshness of foods. Within this context, the objective of this research is to analyze, from the point of view of consumers, the most important product packaging attributes at the time of purchase. For this purpose, the data obtained in this study was run through the Statistica 8.0 and SPSS 16 (Statistical Package Social Sciences software’s.

  4. ICT and the paperboard and packaging industry

    Science.gov (United States)

    Peter Ince; Sanna Kallioranta; Richard Vlosky

    2005-01-01

    The purpose of this chapter is to describe the reasons for the development of ICT and e-business systems in the paper and paperboard packaging industry and to discuss future scenarios that may serve to guide forest- sector research in this topical area. The paper and paperboard packaging industry encompasses producers of primary paper and paperboard packaging materials...

  5. 7 CFR 65.130 - Consumer package.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Consumer package. 65.130 Section 65.130 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards..., PEANUTS, AND GINSENG General Provisions Definitions § 65.130 Consumer package. Consumer package means any...

  6. 7 CFR 993.22 - Consumer package.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Consumer package. 993.22 Section 993.22 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 993.22 Consumer package. Consumer package means: (a) Any...

  7. Packaging of high power semiconductor lasers

    CERN Document Server

    Liu, Xingsheng; Xiong, Lingling; Liu, Hui

    2014-01-01

    This book introduces high power semiconductor laser packaging design. The characteristics and challenges of the design and various packaging, processing, and testing techniques are detailed by the authors. New technologies, in particular thermal technologies, current applications, and trends in high power semiconductor laser packaging are described at length and assessed.

  8. Magnetic Package data quality overview

    DEFF Research Database (Denmark)

    Qamili, Enkelejda; Ottavianelli, Giuseppe; Olsen, Nils

    The ESA Swarm satellites, launched in November 2013, carry on-board instuments devoted to measure extremely accurate data necessary to improve our understanding of Earth’s magnetic field. The Swarm instrument package is made by two magnetometers (one vector and one scalar), one Electric field Ins...... Instrument (EFI), one Accelerometer and one GPS reciever. This presentation aims at providing an extensive overview of the magnetic instrument status, magnetic data availability and quality.......The ESA Swarm satellites, launched in November 2013, carry on-board instuments devoted to measure extremely accurate data necessary to improve our understanding of Earth’s magnetic field. The Swarm instrument package is made by two magnetometers (one vector and one scalar), one Electric field...

  9. Transportation and packaging resource guide

    Energy Technology Data Exchange (ETDEWEB)

    Arendt, J.W.; Gove, R.M.; Welch, M.J.

    1994-12-01

    The purpose of this resource guide is to provide a convenient reference document of information that may be useful to the U.S. Department of Energy (DOE) and DOE contractor personnel involved in packaging and transportation activities. An attempt has been made to present the terminology of DOE community usage as it currently exists. DOE`s mission is changing with emphasis on environmental cleanup. The terminology or nomenclature that has resulted from this expanded mission is included for the packaging and transportation user for reference purposes. Older terms still in use during the transition have been maintained. The Packaging and Transportation Resource Guide consists of four sections: Sect. 1, Introduction; Sect. 2, Abbreviations and Acronyms; Sect. 3, Definitions; and Sect. 4, References for packaging and transportation of hazardous materials and related activities, and Appendices A and B. Information has been collected from DOE Orders and DOE documents; U.S Department of Transportation (DOT), U.S. Environmental Protection Agency (EPA), and U.S. Nuclear Regulatory Commission (NRC) regulations; and International Atomic Energy Agency (IAEA) standards and other international documents. The definitions included in this guide may not always be a regulatory definition but are the more common DOE usage. In addition, the definitions vary among regulatory agencies. It is, therefore, suggested that if a definition is to be used in a regulatory or a legal compliance issue, the definition should be verified with the appropriate regulation. To assist in locating definitions in the regulations, a listing of all definition sections in the regulations are included in Appendix B. In many instances, the appropriate regulatory reference is indicated in the right-hand margin.

  10. Small Cold Temperature Instrument Packages

    Science.gov (United States)

    Clark, P. E.; Millar, P. S.; Yeh, P. S.; Feng, S.; Brigham, D.; Beaman, B.

    We are developing a small cold temperature instrument package concept that integrates a cold temperature power system with ultra low temperature ultra low power electronics components and power supplies now under development into a 'cold temperature surface operational' version of a planetary surface instrument package. We are already in the process of developing a lower power lower temperature version for an instrument of mutual interest to SMD and ESMD to support the search for volatiles (the mass spectrometer VAPoR, Volatile Analysis by Pyrolysis of Regolith) both as a stand alone instrument and as part of an environmental monitoring package. We build on our previous work to develop strategies for incorporating Ultra Low Temperature/Ultra Low Power (ULT/ULP) electronics, lower voltage power supplies, as well as innovative thermal design concepts for instrument packages. Cryotesting has indicated that our small Si RHBD CMOS chips can deliver >80% of room temperature performance at 40K (nominal minimum lunar surface temperature). We leverage collaborations, past and current, with the JPL battery development program to increase power system efficiency in extreme environments. We harness advances in MOSFET technology that provide lower voltage thresholds for power switching circuits incorporated into our low voltage power supply concept. Conventional power conversion has a lower efficiency. Our low power circuit concept based on 'synchronous rectification' could produce stable voltages as low as 0.6 V with 85% efficiency. Our distributed micro-battery-based power supply concept incorporates cold temperature power supplies operating with a 4 V or 8 V battery. This work will allow us to provide guidelines for applying the low temperature, low power system approaches generically to the widest range of surface instruments.

  11. Waste Package Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  12. Hazardous Material Packaging and Transportation

    Energy Technology Data Exchange (ETDEWEB)

    Hypes, Philip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-04

    This is a student training course. Some course objectives are to: recognize and use standard international and US customary units to describe activities and exposure rates associated with radioactive material; determine whether a quantity of a single radionuclide meets the definition of a class 7 (radioactive) material; determine, for a given single radionuclide, the shipping quantity activity limits per 49 Code of Federal Regulations (CFR) 173.435; determine the appropriate radioactive material hazard class proper shipping name for a given material; determine when a single radionuclide meets the DOT definition of a hazardous substance; determine the appropriate packaging required for a given radioactive material; identify the markings to be placed on a package of radioactive material; determine the label(s) to apply to a given radioactive material package; identify the entry requirements for radioactive material labels; determine the proper placement for radioactive material label(s); identify the shipping paper entry requirements for radioactive material; select the appropriate placards for a given radioactive material shipment or vehicle load; and identify allowable transport limits and unacceptable transport conditions for radioactive material.

  13. Active packaging with antifungal activities.

    Science.gov (United States)

    Nguyen Van Long, N; Joly, Catherine; Dantigny, Philippe

    2016-03-02

    There have been many reviews concerned with antimicrobial food packaging, and with the use of antifungal compounds, but none provided an exhaustive picture of the applications of active packaging to control fungal spoilage. Very recently, many studies have been done in these fields, therefore it is timely to review this topic. This article examines the effects of essential oils, preservatives, natural products, chemical fungicides, nanoparticles coated to different films, and chitosan in vitro on the growth of moulds, but also in vivo on the mould free shelf-life of bread, cheese, and fresh fruits and vegetables. A short section is also dedicated to yeasts. All the applications are described from a microbiological point of view, and these were sorted depending on the name of the species. Methods and results obtained are discussed. Essential oils and preservatives were ranked by increased efficacy on mould growth. For all the tested molecules, Penicillium species were shown more sensitive than Aspergillus species. However, comparison between the results was difficult because it appeared that the efficiency of active packaging depended greatly on the environmental factors of food such as water activity, pH, temperature, NaCl concentration, the nature, the size, and the mode of application of the films, in addition to the fact that the amount of released antifungal compounds was not constant with time. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Package security recorder of vibration

    Science.gov (United States)

    Wang, Xiao-na; Hu, Jin-liang; Song, Shi-de

    2013-08-01

    This paper introduces a new kind of electronic product — Package Security Recorder of Vibration. It utilizes STC89C54RD+ LQFP-44 MCU as its main controller. At the same time, it also utilizes Freescale MMA845A 3-Axis 8-bit/12-bit Digital Accelerometer and Maxim DS1302 Trickle Charge Timekeeping Chip. It utilizes the MCU to read the value of the accelerometer and the value of the timekeeping chip, and records the data into the inner E2PROM of MCU. The whole device achieves measuring, reading and recording the time of the vibration and the intensity of the vibration. When we need the data, we can read them out. The data can be used in analyzing the condition of the cargo when it transported. The device can be applied to monitor the security of package. It solves the problem of responsibility affirming, when the valuable cargo are damaged while it transported. It offers powerful safeguard for the package. It's very value for application.

  15. Neurovestibular Compensation following Ototoxic Lesion and Labyrinthectomy

    Directory of Open Access Journals (Sweden)

    Yazdanshenas, Hamed

    2016-03-01

    Full Text Available Introduction Unilateral labyrinthectomy and intra-tympanic gentamycin have been employed in the treatment of Ménière's disease, but the efficacy of these techniques has not been well established. Objective The objective of this study is to measure the time course of recovery from a unilateral labyrinthectomy either after ipsilateral topical treatment with gentamicin to the inner ear or without the previous insult. Methods Twenty-nine adult Mongolian gerbils were randomized into two experimental groups. Group 1 (n = 17 received a right ear gentamicin drug-induced lesion by unilateral labyrinthectomy (UL. Group 2 (n = 12 only received a right unilateral labyrinthectomy lesion. We measured the horizontal vestibulo-ocular responses in gerbils before and after the lesion. The gerbils received an angular acceleration stimulus and their eye movements were recorded. Results The gentamicin lesion resulted in a quicker recovery. Experimental groups underwent a similar time course of recovery. Statistical analysis showed no significant difference between the two groups. Both groups displayed adaptation to the lesion by day 21, but long-term compensation did not completely revert to the original pre-lesion state. Conclusions In a lesion requiring both static and dynamic compensation as in UL, the need for a static compensation may alter pre-existing compensation from a previous dynamic insult and require a new compensation. A previous lesion and adaptation is not preserved for a second lesion and the subject has to re-compensate. Therefore, surgical treatment in Meniere's disease such as UL can be considered without prior gentamicin treatment. Static and dynamic compensations do not appear to be as independent as previous studies have suggested.

  16. 50 CFR 600.245 - Council member compensation.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Council member compensation. 600.245....245 Council member compensation. (a) All voting Council members whose eligibility for compensation has... state income taxes. A report of compensation will be furnished each year by the member's Council to the...

  17. 38 CFR 3.5 - Dependency and indemnity compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Dependency and indemnity... ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.5 Dependency and indemnity compensation. (a) Dependency and indemnity compensation. This term means a monthly payment made by...

  18. Examination of SR101 shipping packages

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-01

    Four SR101 shipping packages were removed from service and provided for disassembly and examination of the internal fiberboard assemblies. These packages were 20 years old, and had experienced varying levels of degradation. Two of the packages were successfully disassembled and fiberboard samples were removed from these packages and tested. Mechanical and thermal property values are generally comparable to or higher than baseline values measured on fiberboard from 9975 packages, which differs primarily in the specified density range. While baseline data for the SR101 material is not available, this comparison with 9975 material suggests that the material properties of the SR101 fiberboard have not significantly degraded.

  19. The Model 9977 Radioactive Material Packaging Primer

    Energy Technology Data Exchange (ETDEWEB)

    Abramczyk, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-09

    The Model 9977 Packaging is a single containment drum style radioactive material (RAM) shipping container designed, tested and analyzed to meet the performance requirements of Title 10 the Code of Federal Regulations Part 71. A radioactive material shipping package, in combination with its contents, must perform three functions (please note that the performance criteria specified in the Code of Federal Regulations have alternate limits for normal operations and after accident conditions): Containment, the package must “contain” the radioactive material within it; Shielding, the packaging must limit its users and the public to radiation doses within specified limits; and Subcriticality, the package must maintain its radioactive material as subcritical

  20. Challenges in the Packaging of MEMS

    Energy Technology Data Exchange (ETDEWEB)

    Malshe, A.P.; Singh, S.B.; Eaton, W.P.; O' Neal, C.; Brown, W.D.; Miller, W.M.

    1999-03-26

    The packaging of Micro-Electro-Mechanical Systems (MEMS) is a field of great importance to anyone using or manufacturing sensors, consumer products, or military applications. Currently much work has been done in the design and fabrication of MEMS devices but insufficient research and few publications have been completed on the packaging of these devices. This is despite the fact that packaging is a very large percentage of the total cost of MEMS devices. The main difference between IC packaging and MEMS packaging is that MEMS packaging is almost always application specific and greatly affected by its environment and packaging techniques such as die handling, die attach processes, and lid sealing. Many of these aspects are directly related to the materials used in the packaging processes. MEMS devices that are functional in wafer form can be rendered inoperable after packaging. MEMS dies must be handled only from the chip sides so features on the top surface are not damaged. This eliminates most current die pick-and-place fixtures. Die attach materials are key to MEMS packaging. Using hard die attach solders can create high stresses in the MEMS devices, which can affect their operation greatly. Low-stress epoxies can be high-outgassing, which can also affect device performance. Also, a low modulus die attach can allow the die to move during ultrasonic wirebonding resulting to low wirebond strength. Another source of residual stress is the lid sealing process. Most MEMS based sensors and devices require a hermetically sealed package. This can be done by parallel seam welding the package lid, but at the cost of further induced stress on the die. Another issue of MEMS packaging is the media compatibility of the packaged device. MEMS unlike ICS often interface with their environment, which could be high pressure or corrosive. The main conclusion we can draw about MEMS packaging is that the package affects the performance and reliability of the MEMS devices. There is a

  1. Lunar Dust Analysis Package - LDAP

    Science.gov (United States)

    Chalkley, S. A.; Richter, L.; Goepel, M.; Sovago, M.; Pike, W. T.; Yang, S.; Rodenburg, J.; Claus, D.

    2012-09-01

    The Lunar Dust Analysis package (L-DAP) is a suite of payloads which have been designed to operate in synergy with each other at the Lunar Surface. The benefits of combining these payloads in a single package allow very precise measurements of a particular regolith sample. At the same time the integration allows mass savings since common resources are shared and this also means that interfaces with the Lander are simplified significantly leading to benefits of integration and development of the overall mission. Lunar Dust represents a real hazard for lunar exploration due to its invasive, fine microscopic structure and toxic properties. However it is also valuable resource which could be exploited for future exploration if the characteristics and chemical composition is well known. Scientifically, the regolith provides an insight into the moon formation process and there are areas on the Moon which have never been ex-plored before. For example the Lunar South Pole Aitken Basin is the oldest and largest on the moon, providing excavated deep crust which has not been found on the previous lunar landing missions. The SEA-led team has been designing a compact package, known as LDAP, which will provide key data on the lunar dust properties. The intention is for this package to be part of the payload suite deployed on the ESA Lunar Lander Mission in 2018. The LDAP has a centralised power and data electronics, including front end electronics for the detectors as well as sample handling subsystem for the following set of internal instruments : • Optical Microscope - with a 1μm resolution to provide context of the regolith samples • Raman and LIBS spectrographic instrumentation providing quantification of mineral and elemental composition information of the soil at close to grain scale. This includes the capability to detect (and measure abundance of) crystalline and adsorbed volatile phases, from their Raman signature. The LIBS equipment will also allow chemical

  2. Managerial Stock Compensation and Risky Investment

    Directory of Open Access Journals (Sweden)

    Raluca Georgiana Nastasescu

    2009-06-01

    Full Text Available This study analyzes the relationship between the mix of CEO equity-based compensation, namely stock options and restricted stock, and firms' risky investment. In general, the theory suggests that long-term compensation aligns CEOs' and shareholders' interests by inducing the managers to undertake risky investment, which has a positive impact on longterm well-being of the firm. However, as my results show, it is important to distinguish between types of awards since they can have different effects on the riskiness of the firm. In this respect, I answer the question how are different types of stock based compensation related to the executives' determination to increase or not the intensity of the firm's risky investment? I find that awarding the CEOs preponderantly with stock options positively affects the firm's level of R&D investment. Conversely, a higher proportion of restricted stock in the CEO's compensation is related to lower investment in (risky R&D. The inverse relation of causality also holds. Firms that make intensive R&D investments are more likely to award their CEOs with more stock options relative to restricted stock. Overall, the results are consistent with the theoretical prediction, in that the managerial compensation scheme plays an important role in determining the level of R&D investment.

  3. Attenuation compensation for optical coherence tomography imaging

    Science.gov (United States)

    Chang, Shoude; Flueraru, Costel; Mao, Youxin; Sherif, Sherif

    2009-12-01

    Optical coherence tomography (OCT) is a noninvasive technique that provides micrometer-scale imaging of tissue. As most biological tissues are considered turbid, it causes attenuation of the OCT signal and limits the depth penetration. Although a few algorithms had been developed to compensate the attenuation, almost all of them need to extract the scattering parameters before doing the compensation procedure. Because the real biological samples are anisotropic and multilayer-like structure, it is not time-efficient to model and solve these scattering parameters. This paper introduces a new method to compensate the OCT signal attenuation in depth. By analyzing the input signal, a compensation function is adaptively derived for each A-scan line, which can be used effectively to compensate the energy loss in the large sections and enhance the details in the deep, dark-like areas. Three bio-samples, a piece of onion, a Poecilia Wingei fish and a piece of rabbit abdominal aorta, were used to test our method. OCT images obtained by a swept-source OCT system were processed by the proposed method. Results show the visualization of structures in OCT images has been evidently improved, especially in deep region.

  4. Principles of designing digital compensating accelerometers

    Science.gov (United States)

    Skalon, A. I.

    1985-05-01

    Digital compensating accelerometers use three types of feedback: (1) analog feedback with voltage-to-code or current-to-code conversion; (2) pulse-current conversion; pulse-current feedback; or (3) mechanical feedback through mass and strings. An accelerometer with voltage-to-code conversion, consists of a sensor, a position transducer, and amplifier which also converts the amplified signal to feedback current, an analog-to-digital converter shunted by a precision resistor, and a compensating current-to-force or current-to-torque converter. An accelerometer with current-to-code conversion includes, a reversible counter, a pulse generator, a current stabilizer, and a threshold device, all in parallel between two switches feeding into the feedback loop with an integrating capacitor across. In an accelerometer with a mass suspended betwen two orthogonal pairs of strings, the mass is the sensing element and the vibration frequency differences of the strings are the basis for compensation. Accelerometers with pulse-current feedback have a modulator behind a plain signal amplifier and a low-leakage transistor switch between the modulator and the compensating converter, this switch is also connected to a current stabilizer. The accuracy of the accelerometers is determined only by the error of the compensating converter, the instability and the nonlinearity of the current stabilizer, and the quality of the transistor switch.

  5. Mechanisms of vestibular compensation: recent advances.

    Science.gov (United States)

    Dutia, Mayank B

    2010-10-01

    This article reviews recent studies that have provided experimental evidence for mechanisms of neural and synaptic plasticity in the brain during vestibular compensation, the behavioural recovery that takes place following peripheral vestibular lesions. First, experimental evidence from animal studies indicates that an unbalanced vestibular commissural system is a fundamental cause of the syndrome of oculomotor and postural deficits after unilateral labyrinthectomy. Second, recent studies suggest the involvement of both GABAergic and glycinergic commissural neurons. In addition gliosis and reactive neurogenesis in the ipsilesional vestibular nuclei appear to be involved in compensation. Third, evidence from cerebellar-deficient mutant mice demonstrates an important role for cerebellum-dependent motor learning in the longer term. Factors such as stress steroids and neuromodulators such as histamine influence these plasticity mechanisms and may thus contribute to the development of compensation in patients. Vestibular compensation involves multiple, parallel plastic processes at various sites in the brain. Experimental evidence suggests that adaptive changes in the sensitivity of ipsilesional vestibular neurons to the inhibitory neurotransmitters GABA and glycine, changes in the electrophysiological excitability of vestibular neurons, changes in the inhibitory control of the brainstem vestibular networks by the cerebellum, gliosis and neurogenesis in the ipsilesional vestibular nuclei, and activity-dependent reorganization of the synaptic connectivity of the vestibular pathways are mechanisms involved in compensation.

  6. The art of packaging: An investigation into the role of color in packaging, marketing, and branding

    OpenAIRE

    Behzad Mohebbi

    2014-01-01

    The purpose of this study is to contribute to the existing research in the field of packaging and marketing and shed more light on the psychology of colors and their effect on packaging and marketing. Nowadays, packaging is proved to be one of the significant factors in the success of promoting product sale. However, there is a perceived gap with respect to the different aspects of packaging, in particular the graphics, design, and color of packaging. The current study provides...

  7. Safety analysis report -- Packages LP-50 tritium package (Packaging of fissile and other radioactive materials)

    Energy Technology Data Exchange (ETDEWEB)

    Gates, A.A.; McCarthy, P.G.; Edl, J.W.; Chalfant, G.G. (comps.); Cadelli, G.

    1975-05-01

    Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) surrounded by an aluminum vessel and Celotex insulation at least 4 in. thick in a steel drum. Each package contains a large quantity (greater than a Type A quantity) of nonfissile material, as defined in AECM 0529. This report provides the details of the safety analysis performed for this type container.

  8. Antimicrobial packaging with natural compunds - a review

    Directory of Open Access Journals (Sweden)

    Renata Dobrucka

    2016-12-01

    Full Text Available Background:  Packaging problems are an integral part of logistics and the implementation of packaging significantly affects the effectiveness of logistics processes, as a factor which increases the safety and the quality of products being transported. Active packaging is an area of technology needed to meet the requirements of the contemporary consumer. Active packaging creates additional opportunities in systems for packing goods, as well as offering a solution in which the packaging, the product and surroundings interact. Furthermore, active packaging allows packaging to interact with food and the environment and play a dynamic role in food preservation. The main role of antimicrobial packaging is to inhibit the growth of microorganisms that reduce the quality of the packaged product. Methods: The application of natural antimicrobial agents appears to be safe for food products. Also, these compounds have potential applications as a natural preservative in the food packaging industry. This study presents some antibacterial agents, namely chitosan, nisin and pectins. Results and conclusion: Natural substances used in active packaging can eliminate the danger of chemical substances migrating to food.

  9. IMS Content Packaging v1.2 public draft specification

    NARCIS (Netherlands)

    Burgos, Daniel; Tattersall, Colin; Vogten, Hubert

    2006-01-01

    The IMS Content Packaging Specification provides the functionality to describe and package learning materials, such as an individual course or a collection of courses, into interoperable, distributable packages. Content Packaging addresses the description, structure, and location of online learning

  10. Package Formats for Preserved Digital Material

    DEFF Research Database (Denmark)

    Zierau, Eld

    2012-01-01

    This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up requireme......This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up...... requirements for package formats used for long term preserved digital material, and using these requirements as the basis for analysing a range of package formats. The result of the concrete investigation is that the WARC format is the package format best suited for the listed requirements. Fulfilling......, e.g. if there are specific forensic or direct access to files....

  11. Examination of shipping package 9975-02403

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-01

    SRNL examined shipping package 9975-02403 following storage of nuclear material in K-Area Complex (KAC). As a result of field surveillance activities in KAC, this package was identified to contain several non-conforming and other conditions. Further examination of this package in SRNL confirmed significant moisture and mold in the bottom layers of the lower fiberboard assembly, and identified additional corrosion along the seam weld and on the bottom of the drum. It was recently recommended that checking for corrosion along the bottom edge of the drum be implemented for packages that are removed from storage, as well as high wattage packages remaining in storage. The appearance of such corrosion on 9975-02403 further indicates that such corrosion may provide an indication of significant moisture concentration and related degradation within the package. This condition is more likely to develop in packages with higher internal heat loads.

  12. RF and microwave microelectronics packaging II

    CERN Document Server

    Sturdivant, Rick

    2017-01-01

    Reviews RF, microwave, and microelectronics assembly process, quality control, and failure analysis Bridges the gap between low cost commercial and hi-res RF/Microwave packaging technologies Engages in an in-depth discussion of challenges in packaging and assembly of advanced high-power amplifiers This book presents the latest developments in packaging for high-frequency electronics. It is a companion volume to “RF and Microwave Microelectronics Packaging” (2010) and covers the latest developments in thermal management, electrical/RF/thermal-mechanical designs and simulations, packaging and processing methods, and other RF and microwave packaging topics. Chapters provide detailed coverage of phased arrays, T/R modules, 3D transitions, high thermal conductivity materials, carbon nanotubes and graphene advanced materials, and chip size packaging for RF MEMS. It appeals to practicing engineers in the electronic packaging and high-frequency electronics domain, and to academic researchers interested in underst...

  13. (Crime Victims’ Compensation: The Emergence of Convergence

    Directory of Open Access Journals (Sweden)

    Renée S.B. Kool

    2014-07-01

    Full Text Available Crime victims’ compensation has become a major issue within Dutch criminal policy. Legal procedures have been subject to change, leading towards the convergence of tort law and criminal law. Such a convergence calls for a reflection (on the application of the core concepts of responsibility, accountability and liability. Moreover, the current pursuit of victims’ compensation affects procedural issues, specifically with regard to the issue of enforcement. Leaving aside the issue of the legitimacy of victims’ compensation, this convergence raises the question of how to preserve the delicate balance that flows from the use of the law as an instrument to preserve social order. The topical question is not whether convergence is occurring, but how we must deal with it in order to find a (new equilibrium between the public interest and the interest of the individual who has experienced a harmful wrong.

  14. On the compensation effect in heterogeneous catalysis

    DEFF Research Database (Denmark)

    Pedersen, Thomas Bligaard; Honkala, Johanna Karoliina; Logadottir, Ashildur

    2003-01-01

    For a class of heterogeneously catalyzed reactions, we explain the compensation effect in terms of a switching of kinetic regimes leading to a concomitant change in the apparent activation energy and in the prefactor for the overall rate of the reaction. We first use the ammonia synthesis...... to illustrate the effect. Both experiments and a detailed kinetic model show a compensation effect. Second, we use density functional theory calculations to show that the compensation effect is not only due to changes in the activation barrier and prefactor of the rate-determining step, N-2 dissociation. We...... model for a surface-catalyzed reaction and show that the effect can be related to a shift in kinetic regime, from one dominated by the rate of activation of the reactants to a regime where the stability of the reaction products on the surface becomes increasingly important. Finally, we present arguments...

  15. Software compensation in Particle Flow reconstruction

    CERN Document Server

    Lan Tran, Huong; Sefkow, Felix; Green, Steven; Marshall, John; Thomson, Mark; Simon, Frank

    2017-01-01

    The Particle Flow approach to calorimetry requires highly granular calorimeters and sophisticated software algorithms in order to reconstruct and identify individual particles in complex event topologies. The high spatial granularity, together with analog energy information, can be further exploited in software compensation. In this approach, the local energy density is used to discriminate electromagnetic and purely hadronic sub-showers within hadron showers in the detector to improve the energy resolution for single particles by correcting for the intrinsic non-compensation of the calorimeter system. This improvement in the single particle energy resolution also results in a better overall jet energy resolution by improving the energy measurement of identified neutral hadrons and improvements in the pattern recognition stage by a more accurate matching of calorimeter energies to tracker measurements. This paper describes the software compensation technique and its implementation in Particle Flow reconstruct...

  16. Incomplete and imperfect information for sales compensation

    Directory of Open Access Journals (Sweden)

    Raluca Valeanu

    2010-12-01

    Full Text Available Sales force compensation represents the fix and / or variable payment by the company. To compensate agents based on the results, the company set a goal which is brought to their attention through the compensation plan. Applying the model of moral hazard, where the agent behavior cannot be verified, it cannot be specified in the contract what is the expected behavior of the agent. In order to make an offer to contract principal should know the effort that the agent will submit it to define the payment and the contract is determined optimally in trade between the two conflicting objectives of the two participants in the contract. Although agent behavior cannot be verified, the result of this behavior should be measurable at the end of the contract so that the employer may make the contract contingent on effort commission agent for sale of which is measured by the amount of earnings to the company.

  17. Institutional directors and board compensation: Spanish evidence

    Directory of Open Access Journals (Sweden)

    Felix López-Iturriaga

    2015-07-01

    Full Text Available We address the influence of directors who represent institutional investors in three aspects of board compensation policies: level of compensation, composition, and performance sensitivity. We differentiate pressure-sensitive directors (i.e., with business links and pressure-resistant directors (i.e., without business links. Our results show that pressure-resistant directors decrease total board compensation and its fixed proportion, whereas they increase the variable proportion of total remuneration and the pay-for-performance sensitivity. By contrast, pressure-sensitive directors offer the opposite results. These findings are consistent with the view that institutional investors are not a homogeneous group and that pressure-resistant directors fulfill a more thorough monitoring role.

  18. Temperature effects and compensation-control methods.

    Science.gov (United States)

    Xia, Dunzhu; Chen, Shuling; Wang, Shourong; Li, Hongsheng

    2009-01-01

    In the analysis of the effects of temperature on the performance of microgyroscopes, it is found that the resonant frequency of the microgyroscope decreases linearly as the temperature increases, and the quality factor changes drastically at low temperatures. Moreover, the zero bias changes greatly with temperature variations. To reduce the temperature effects on the microgyroscope, temperature compensation-control methods are proposed. In the first place, a BP (Back Propagation) neural network and polynomial fitting are utilized for building the temperature model of the microgyroscope. Considering the simplicity and real-time requirements, piecewise polynomial fitting is applied in the temperature compensation system. Then, an integral-separated PID (Proportion Integration Differentiation) control algorithm is adopted in the temperature control system, which can stabilize the temperature inside the microgyrocope in pursuing its optimal performance. Experimental results reveal that the combination of microgyroscope temperature compensation and control methods is both realizable and effective in a miniaturized microgyroscope prototype.

  19. Bjerknes compensation in the Bergen Climate Model

    Science.gov (United States)

    Outten, Stephen; Esau, Igor

    2017-10-01

    The meridional transport of heat is a critical component of the Earth's climate system. If the total heat transported by the climate system is approximately constant, then the anomalies of heat transported by the atmosphere and ocean should be approximately equal and opposite, a scenario now called Bjerknes compensation. This has previously been found in two coupled climate models, with both showing multi-decadal variability in the heat transports. This work identifies Bjerknes compensation in the Bergen Climate Model, adding to the understanding of the robust features of Bjerknes compensation in coupled climate models. The atmospheric and oceanic heat transports are investigated in the 600-year control run of a fully-coupled global climate model. The presence of Bjerknes compensation is confirmed by the strong anti-correlation and equal magnitude of the anomalies of these heat transports. The heat transport anomalies contain a signal of multi-decadal variability. Since natural variability in global heat transport could mask anthropogenic climate change signals, understanding Bjerknes compensation is of socio-economic importance. Using regression analysis the atmospheric and oceanic responses to the multi-decadal variability of the Bjerknes compensation signal are investigated. This highlights the importance of the marginal ice zones of the Greenland and Barents Seas as the critical location for coupling the atmosphere and ocean. During periods of increased heat transport in the ocean, these regions show decreased sea-ice, leading to increased fluxes and local temperatures, and giving rise to a thermal low-pressure center and a non-local high-pressure centre, thus changing the atmospheric flow on multi-decadal timescales.

  20. Gigabit Ethernet Asynchronous Clock Compensation FIFO

    Science.gov (United States)

    Duhachek, Jeff

    2012-01-01

    Clock compensation for Gigabit Ethernet is necessary because the clock recovered from the 1.25 Gb/s serial data stream has the potential to be 200 ppm slower or faster than the system clock. The serial data is converted to 10-bit parallel data at a 125 MHz rate on a clock recovered from the serial data stream. This recovered data needs to be processed by a system clock that is also running at a nominal rate of 125 MHz, but not synchronous to the recovered clock. To cross clock domains, an asynchronous FIFO (first-in-first-out) is used, with the write pointer (wprt) in the recovered clock domain and the read pointer (rptr) in the system clock domain. Because the clocks are generated from separate sources, there is potential for FIFO overflow or underflow. Clock compensation in Gigabit Ethernet is possible by taking advantage of the protocol data stream features. There are two distinct data streams that occur in Gigabit Ethernet where identical data is transmitted for a period of time. The first is configuration, which happens during auto-negotiation. The second is idle, which occurs at the end of auto-negotiation and between every packet. The identical data in the FIFO can be repeated by decrementing the read pointer, thus compensating for a FIFO that is draining too fast. The identical data in the FIFO can also be skipped by incrementing the read pointer, which compensates for a FIFO draining too slowly. The unique and novel features of this FIFO are that it works in both the idle stream and the configuration streams. The increment or decrement of the read pointer is different in the idle and compensation streams to preserve disparity. Another unique feature is that the read pointer to write pointer difference range changes between compensation and idle to minimize FIFO latency during packet transmission.

  1. Compensation systems for low temperature applications

    CERN Document Server

    Skoczen, Balzej T

    2004-01-01

    The book is dedicated to the behaviour of ductile materials at cryogenic temperatures, structural stability issues and reliability oriented parametric optimisation of compensation systems containing the corrugated bellows. The problems of local and global stability of systems containing bellows, coupling between the low-cycle fatigue and stability as well as evolution of plastic strain fields, micro-damage and strain induced phase transformation in the corrugated shells at cryogenic temperatures are presented. As a special feature reliability oriented optimum design of compensation systems under strength, stability, fatigue and geometrical constraints is discussed. The relevant applications in the particle accelerators and cryogenic transfer lines are shown.

  2. Filament stretching rheometer: inertia compensation revisited

    DEFF Research Database (Denmark)

    Szabo, Peter; McKinley, Gareth H.

    2003-01-01

    The necessary inertia compensation used in the force balance for the filament stretching rheometer is derived for an arbitrary frame of reference. This enables the force balance to be used to extract correctly the extensional viscosity from measurements of the tensile force at either end of the e......The necessary inertia compensation used in the force balance for the filament stretching rheometer is derived for an arbitrary frame of reference. This enables the force balance to be used to extract correctly the extensional viscosity from measurements of the tensile force at either end...

  3. Trends in VBA Disability Compensation Spending

    Science.gov (United States)

    2016-06-01

    I N S T I T U T E F O R D E F E N S E A N A L Y S E S Trends in VBA Disability Compensation Spending Sarah K. Burns Kristen M. Guerrera David E...license under the clause at DFARS 252.227-7013 (a)(16) [Jun 2013]. Trends in VBA Disability Compensation Spending Sarah K. Burns Kristen M. Guerrera...53.9 billion in 2014. The most recent 15-year period shows a fundamental change in participation in the Veterans Benefit Administration ( VBA

  4. Security careers skills, compensation, and career paths

    CERN Document Server

    Walker, Stephen W

    2014-01-01

    The third edition of Security Careers is the authoritative reference for current job descriptions and pay practices of security, compliance, ethics, environmental, health and safety occupations. The job descriptions and compensation ranges in this report are drawn from research from the Foushée Group, which has been conducting this research since 1980. Security Careers includes more than 75 job descriptions for security-related positions, which range from the entry-level security guard to the top global corporate executive. It also provides four years of compensation trend data to give a th

  5. Individual Hearing Loss: Characterization, Modelling, Compensation Strategies

    DEFF Research Database (Denmark)

    Santurette, Sébastien; Dau, Torsten; Christensen-Dalsgaard, Jakob

    2016-01-01

    It is well-established that hearing loss does not only lead to a reduction of hearing sensitivity. Large individual differences are typically observed among listeners with hearing impairment in a wide range of suprathreshold auditory measures. In many cases, audiometric thresholds cannot fully...... account for such individual differences, which make it challenging to find adequate compensation strategies in hearing devices. How to characterize, model, and compensate for individual hearing loss were the main topics of the fifth International Symposium on Auditory and Audiological Research (ISAAR...

  6. Static compensators (STATCOMs) in power systems

    CERN Document Server

    Shahnia, Farhad; Ghosh, Arindam

    2014-01-01

    A static compensator (STATCOM), also known as static synchronous compensator, is a member of the flexible alternating current transmission system (FACTS) devices. It is a power-electronics based regulating device which is composed of a voltage source converter (VSC) and is shunt-connected to alternating current electricity transmission and distribution networks. The voltage source is created from a DC capacitor and the STATCOM can exchange reactive power with the network. It can also supply some active power to the network, if a DC source of power is connected across the capacitor. A STATCOM

  7. Geographical relationships and CEO compensation contracts

    Directory of Open Access Journals (Sweden)

    Junli Yu

    2017-06-01

    Full Text Available In this paper, we empirically analyze the effects that the geographical relationships between chairman and CEO have on the latter’s compensation contracts, based on samples of listed A-share private firms from 2005 to 2014. We find that geographical relationships are related to lower pay–performance sensitivity, and that the correlation mainly exists in poor performance periods, suggesting that geographical relationships weaken the effectiveness of compensation contracts. We also find that geographical relationships can be substituted by external formal institutions.

  8. Trends in packaged steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Ganapathy, V. [ABCO Industries, Abilene, TX (United States)

    1996-09-01

    Oil and gas-fired packaged steam generators are used in many industrial plants. They generate saturated or superheated steam up to 250,000 lb/hr, 1000 psig, and 950 F. They may be used for continuous steam generation or as standby boilers in cogeneration systems. Numerous variables affect the design of this equipment. A few important considerations should be addressed at an early point by the plant engineer specifying or evaluating equipment options. These considerations include trends such as customized designs that minimize operating costs and ensure emissions regulations are met. The paper discusses efficiency considerations first.

  9. The Innovative Approaches to Packaging – Comparison Analysis of Intelligent and Active Packaging Perceptions in Slovakia

    Directory of Open Access Journals (Sweden)

    Loucanova Erika

    2017-06-01

    Full Text Available Packaging has always served a practical function - to hold goods together and protect it when moving toward the customer through distribution channel. Today packaging is also a container for promoting the product and making it easier and safer to use. The sheer importance of packaging functions is still growing and consequently the interest of the company is to access to the packaging more innovative and creative. The paper deals with the innovative approaches to packaging resulting in the creation of packaging with interactive active features in the form of active and intelligent packaging. Using comparative analysis, we monitored the perception of the active packaging functions in comparison to intelligent packaging function among different age categories. We identified the age categories which are most interested in these functions.

  10. Comparison of environmental sustainability of pharmaceutical packaging

    Directory of Open Access Journals (Sweden)

    Geo Raju

    2016-09-01

    Full Text Available Pharmaceutical companies are increasingly imparting a lot of importance on becoming more sustainable by developing medicines that are having same medicinal value but with reduced environmental impact. Type of packaging of tablets affects the emission generated during packaging of medicines. Selection of an appropriate packaging of medicine also influences the emission added to the environment. This paper aims at the comparison of environmental impacts of two different types of packaging of tablets viz., PVC blister and aluminium blister packaging. Life cycle assessment (LCA methodology is used for this comparison. The study includes stages from Cradle to Gate that is, extraction till the packaging processes focused mainly on manufacturing. The functional unit is taken as material required for packing 1 lakh (100,000, 500 mg of paracetamol tablets. Primary data is provided by a pharmaceutical formulation industry and secondary data is obtained from a commercial LCA database available in GaBi and from literature. LCA software GaBi 7.0 is used to carry out the life cycle assessment of both kinds of packaging. Life cycle impact assessment (LCIA method, CML 2001, is used in this study. The study indicates that the PVC blister packaging performs better compared to the aluminium blister packaging in most of the impact categories considered. It is observed that the process of manufacturing of aluminium foils is a significant contributor to the overall environmental impact of aluminium blister packaging.

  11. Challenges in the Packaging of MEMS

    Energy Technology Data Exchange (ETDEWEB)

    BROWN, WILLIAM D.; EATON, WILLIAM P.; MALSHE, AJAY P.; MILLER, WILLIAM M.; O' NEAL, CHAD; SINGH, SUSHILA B.

    1999-09-24

    Microelectromechanical Systems (MEMS) packaging is much different from conventional integrated circuit (IC) packaging. Many MEMS devices must interface to the environment in order to perform their intended function, and the package must be able to facilitate access with the environment while protecting the device. The package must also not interfere with or impede the operation of the MEMS device. The die attachment material should be low stress, and low outgassing, while also minimizing stress relaxation overtime which can lead to scale factor shifts in sensor devices. The fabrication processes used in creating the devices must be compatible with each other, and not result in damage to the devices. Many devices are application specific requiring custom packages that are not commercially available. Devices may also need media compatible packages that can protect the devices from harsh environments in which the MEMS device may operate. Techniques are being developed to handle, process, and package the devices such that high yields of functional packaged parts will result. Currently, many of the processing steps are potentially harmful to MEMS devices and negatively affect yield. It is the objective of this paper to review and discuss packaging challenges that exist for MEMS systems and to expose these issues to new audiences from the integrated circuit packaging community.

  12. Natural biopolimers in organic food packaging

    Science.gov (United States)

    Wieczynska, Justyna; Cavoski, Ivana; Chami, Ziad Al; Mondelli, Donato; Di Donato, Paola; Di Terlizzi, Biagio

    2014-05-01

    Concerns on environmental and waste problems caused by use of non-biodegradable and non-renewable based plastic packaging have caused an increase interest in developing biodegradable packaging using renewable natural biopolymers. Recently, different types of biopolymers like starch, cellulose, chitosan, casein, whey protein, collagen, egg white, soybean protein, corn zein, gelatin and wheat gluten have attracted considerable attention as potential food packaging materials. Recyclable or biodegradable packaging material in organic processing standards is preferable where possible but specific principles of packaging are not precisely defined and standards have to be assessed. There is evidence that consumers of organic products have specific expectations not only with respect to quality characteristics of processed food but also in social and environmental aspects of food production. Growing consumer sophistication is leading to a proliferation in food eco-label like carbon footprint. Biopolymers based packaging for organic products can help to create a green industry. Moreover, biopolymers can be appropriate materials for the development of an active surfaces designed to deliver incorporated natural antimicrobials into environment surrounding packaged food. Active packaging is an innovative mode of packaging in which the product and the environment interact to prolong shelf life or enhance safety or sensory properties, while maintaining the quality of the product. The work will discuss the various techniques that have been used for development of an active antimicrobial biodegradable packaging materials focusing on a recent findings in research studies. With the current focus on exploring a new generation of biopolymer-based food packaging materials with possible applications in organic food packaging. Keywords: organic food, active packaging, biopolymers , green technology

  13. The FluxCompensator: Making Radiative Transfer Models of Hydrodynamical Simulations Directly Comparable to Real Observations

    Science.gov (United States)

    Koepferl, Christine M.; Robitaille, Thomas P.

    2017-11-01

    When modeling astronomical objects throughout the universe, it is important to correctly treat the limitations of the data, for instance finite resolution and sensitivity. In order to simulate these effects, and to make radiative transfer models directly comparable to real observations, we have developed an open-source Python package called the FluxCompensator that enables the post-processing of the output of 3D Monte Carlo radiative transfer codes, such as Hyperion. With the FluxCompensator, realistic synthetic observations can be generated by modeling the effects of convolution with arbitrary point-spread functions, transmission curves, finite pixel resolution, noise, and reddening. Pipelines can be applied to compute synthetic observations that simulate observatories, such as the Spitzer Space Telescope or the Herschel Space Observatory. Additionally, this tool can read in existing observations (e.g., FITS format) and use the same settings for the synthetic observations. In this paper, we describe the package as well as present examples of such synthetic observations.

  14. WASTE PACKAGE DESIGN SENSITIVITY REPORT

    Energy Technology Data Exchange (ETDEWEB)

    P. Mecharet

    2001-03-09

    The purpose of this technical report is to present the current designs for waste packages and determine which designs will be evaluated for the Site Recommendation (SR) or Licence Application (LA), to demonstrate how the design will be shown to comply with the applicable design criteria. The evaluations to support SR or LA are based on system description document criteria. The objective is to determine those system description document criteria for which compliance is to be demonstrated for SR; and, having identified the criteria, to refer to the documents that show compliance. In addition, those system description document criteria for which compliance will be addressed for LA are identified, with a distinction made between two steps of the LA process: the LA-Construction Authorization (LA-CA) phase on one hand, and the LA-Receive and Possess (LA-R&P) phase on the other hand. The scope of this work encompasses the Waste Package Project disciplines for criticality, shielding, structural, and thermal analysis.

  15. 76 FR 27959 - Investment Adviser Performance Compensation

    Science.gov (United States)

    2011-05-13

    ... COMMISSION 17 CFR Part 275 RIN 3235-AK71 Investment Adviser Performance Compensation AGENCY: Securities and... amount tests in the rule under the Investment Advisers Act of 1940 that permits investment advisers to... Director, at 202-551-6792, Office of Regulatory Policy, Division of Investment Management, Securities and...

  16. Compensation of regional unemployment in housing markets

    NARCIS (Netherlands)

    Vermeulen, W.; van Ommeren, J.N.

    2008-01-01

    Why are regional unemployment differentials in Europe so persistent if, as the wage curve literature demonstrates, there is no compensation through wages? Using Urban Audit data for 142 cities over 12 EU countries, as well as a Dutch household survey, we estimate relationships between local labour

  17. 32 CFR 196.515 - Compensation.

    Science.gov (United States)

    2010-07-01

    ... NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 196.515... distinctions in rates of pay or other compensation; (b) Results in the payment of wages to employees of one sex...

  18. 38 CFR 23.515 - Compensation.

    Science.gov (United States)

    2010-07-01

    ...) NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Employment in Education Programs or Activities Prohibited § 23.515... distinctions in rates of pay or other compensation; (b) Results in the payment of wages to employees of one sex...

  19. Hybrid VAR compensator with improved efficiency

    Directory of Open Access Journals (Sweden)

    V. V. Burlaka

    2015-03-01

    Full Text Available In modern electrical networks thyristor-switched capacitors (TSC are most used devices for VAR compensation. These devices don’t contain rotating parts and mechanical contacts, provide a stepwise control of reactive power and no generation of harmonics to the network. However, with the help of TSC it’s not possible to ensure smooth control of reactive power and capacitor banks (CB are exposed to the negative impact of higher harmonic components of the network voltage. Hybrid VAR compensator don’t have such drawbacks. It consists of active filter (AF and capacitor bank with discrete regulation. The main drawback of such systems is the necessity of accessing all six terminals of CB, while most of them are manufactured with three terminals, internally delta-connected. In the article, the topology and control system of hybrid VAR compensator free from beforementioned drawback, is proposed. The control system provides operating modes of overcompensation or undercompensation reactive power. VAR distribution regulator performs redistribution of reactive power between active filter and capacitor banks with the condition to minimize active filter’s power. Scheme of the hybrid VAR compensator, which includes a three-phase three-terminal delta-connected capacitor banks, is shown. Proposed approach allows to provide smooth control of reactive power, isolate the capacitor bank from harmonic currents and use a more effective low-voltage power components

  20. Paraxial charge compensator for electron cryomicroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Berriman, John A. [Division of Physical Biochemistry, MRC National Institute for Medical Research, The Ridgeway, Mill Hill, London, NW7 1AA (United Kingdom); Rosenthal, Peter B., E-mail: peter.rosenthal@nimr.mrc.ac.uk [Division of Physical Biochemistry, MRC National Institute for Medical Research, The Ridgeway, Mill Hill, London, NW7 1AA (United Kingdom)

    2012-05-15

    We describe a multi-hole condenser aperture for the production of several electron beams in the transmission electron microscope (TEM) making it possible to simultaneously image and irradiate spatially separated regions of a specimen. When the specimen is a thin film of vitreous ice suspended over a holey carbon film, simultaneous irradiation of the adjacent carbon support with the off-axis beam compensates for some of the effects of charging in the image formed by a beam irradiating only the ice. Because the intervening region is not irradiated, charge-neutralization of frozen-hydrated specimens can occur by a through-space mechanism such as the emission of secondary electrons from a grounded carbon support film. We use paraxial charge compensation (PCC) to control the amount of charge build-up on the specimen and observe the effects of charge on images. The multi-hole aperture thus provides a tool for investigating the mechanism of charging and charge mitigation during the imaging of radiation sensitive biological specimens by cryomicroscopy. -- Highlights: Black-Right-Pointing-Pointer A multi-hole condenser aperture produces multiple (paraxial) beams in TEM. Black-Right-Pointing-Pointer Paraxial charge compensation is used to study electron-optical effects of charging. Black-Right-Pointing-Pointer Emission of secondary electrons controls charging by a through space mechanism. Black-Right-Pointing-Pointer Paraxial beams compensate for charging effects in frozen-hydrated specimens.

  1. Lossless Compression of Video using Motion Compensation

    DEFF Research Database (Denmark)

    Martins, Bo; Forchhammer, Søren

    1998-01-01

    We investigate lossless coding of video using predictive coding andmotion compensation. The methods incorporate state-of-the-art lossless techniques such ascontext based prediction and bias cancellation, Golomb coding, high resolution motion field estimation,3d-dimensional predictors, prediction ...

  2. One-Way Temperature Compensated Fiber Link

    Science.gov (United States)

    2011-05-01

    individual compensated links. [1] R. Wynands and S. Weyers, “Atomic Fountain Clocks,” Metrologia , vol. 42, pp. S64-S79, 2005. [2] A. D. Ludlow...3] A. Bauch, et al. ,”Comparison Between Frequency Standards oin Europe and the USA at the 10-15 Uncertainty Level,” Metrologia , vol. 43, pp.109

  3. ADE 2000 Survey of Department Chair Compensation.

    Science.gov (United States)

    ADE Bulletin, 2002

    2002-01-01

    Surveys the types of support and compensation that chairs in the Association of Departments of English (ADE) community receive. Notes that in the survey larger institutions and those granting advanced degrees are overrepresented, as they are in the ADE membership. Presents results of the surveys in 17 different tables. (SG)

  4. Global Compensation Specialist | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Analyze global compensation trends in the market, conduct salary surveys and benefit reviews for Ottawa hired staff (OHS) and locally-engaged staff (LES) in the regions where IDRC is present, analyze insurance coverage and pension plans and make recommendations to management on the best course of action.

  5. Evaluation of the implementation of Employees Compensation ...

    African Journals Online (AJOL)

    Since the passage into law of the Employees Compensation Act in 2011, countless cases of workplace accidents have occurred in Nigeria. Yet there seems to be no succour for the Nigerian worker as many state governments have either refused to register with or do not have the will power to implement the legislation in ...

  6. Rectangular Laser Resonators with Astigmatic Compensation

    DEFF Research Database (Denmark)

    Skettrup, Torben

    2005-01-01

    An investigation of rectangular resonators with a view to the compensation of astigmatism has been performed. In order to have beam waists placed at the same positions in the tangential and sagittal planes, pairs of equal mirrors were considered. It was found that at least two concave mirrors are...

  7. Wire compensation: Performance, SPS MDs, pulsed system

    CERN Document Server

    Dorda, U

    2008-01-01

    A wire compensation (BBLR) scheme has been proposed in order to improve the long range beam-beam performance of the nominal LHC and its phase 1 and phase 2 upgrades[1]. In this paper we present experimental experience of the CERN SPS wires (BBLR) and report on progress with the RF BBLR.

  8. T1 VSAT Fade Compensation Statistical Results

    Science.gov (United States)

    Johnson, Sandra K.; Acosta, Roberto; Ugweje, Oke

    2000-01-01

    New satellite communication systems are steadily seeking to use higher frequency bands to accommodate the requirements for additional capacity. At these higher frequencies, propagation impairments that did not significantly affect the signal at lower frequencies begin to have considerable impact. In Ka-band. the next logical commercial frequency band to be used for satellite communication, attenuation of the signal due to rain is a primary concern. An experimental satellite built by NASA, the Advanced Communication Technology Satellite (ACTS). launched in September 1993, is the first U.S. communication satellite operating in the Ka-band. In addition to higher carrier frequencies, a number of other new technologies, including on-board baseband processing. multiple beam antennas, and rain fade detection and compensation techniques, were designed into the ACTS. Verification experiments have been conducted since the launch to characterize the new technologies. The focus of this paper is to characterize the method used by the ACTS TI Very Small Aperture Terminal (TI VSAT) ground stations in detecting the presence of fade in the communication signal and to adaptively compensate for it by the addition of burst rate reduction and forward error correction. Measured data obtained from the ACTS program was used to validate the compensation technique. A software process was developed and demonstrated to statistically characterize the increased availability achieved by the compensation techniques in terms of the bit error rate time enhancement factor. Several improvements to the ACTS technique are discussed and possible implementations for future Ka band system are offered.

  9. Granulate of stainless steel as compensator material

    NARCIS (Netherlands)

    J.P.C. van Santvoort (J. P C)

    1995-01-01

    textabstractCompensators produced with computer controlled milling devices usually consist of a styrofoam mould, filled with an appropriate material. We investigated granulate of stainless steel as filling material. This cheap, easy to use, clean and re-usable material can be obtained with an

  10. 22 CFR 146.515 - Compensation.

    Science.gov (United States)

    2010-04-01

    ... employees of the opposite sex for equal work on jobs the performance of which requires equal skill, effort... Relations DEPARTMENT OF STATE CIVIL RIGHTS NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR... Education Programs or Activities Prohibited § 146.515 Compensation. A recipient shall not make or enforce...

  11. 22 CFR 229.515 - Compensation.

    Science.gov (United States)

    2010-04-01

    ... employees of the opposite sex for equal work on jobs the performance of which requires equal skill, effort... Relations AGENCY FOR INTERNATIONAL DEVELOPMENT NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS... in Education Programs or Activities Prohibited § 229.515 Compensation. A recipient shall not make or...

  12. Education, Variation in Earnings, and Nonmonetary Compensation.

    Science.gov (United States)

    Mathios, Alan D.

    1989-01-01

    The National Academy of Sciences-National Research Council Twin Offspring data support the proposition that for those with low levels of education, earnings may be an adequate proxy for compensation, whereas the opposite holds for highly educated people. (Author/JOW)

  13. 24 CFR 3.515 - Compensation.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Compensation. 3.515 Section 3.515 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE...

  14. 77 FR 58469 - Plum Pox Compensation

    Science.gov (United States)

    2012-09-21

    ... spread of plum pox virus (PPV) into uninfected areas of the United States. In addition to the quarantine... Animal and Plant Health Inspection Service 7 CFR Part 301 RIN 0579-AD58 Plum Pox Compensation AGENCY... adopting as a final rule, without change, an interim rule that amended the plum pox regulations to provide...

  15. The compensating income variation of cardiovascular disease

    NARCIS (Netherlands)

    Groot, W.; Maassen van den Brink, H.

    2006-01-01

    This paper uses longitudinal data from the British Household Panel Survey to calculate the compensating income variation (CIV) of cardiovascular disease. It is found that the CIV decreases with age and is higher for men than for women. For women the estimated CIV is similar to those calculated by

  16. Software compensation in particle flow reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Tran, Huong Lan; Krueger, Katja; Sefkow, Felix [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany); Green, Steven; Marshall, John; Thomson, Mark [Cavendish Laboratory, Cambridge (United Kingdom); Simon, Frank [Max-Planck-Institut fuer Physik, Muenchen (Germany)

    2017-10-15

    The particle flow approach to calorimetry benefits from highly granular calorimeters and sophisticated software algorithms in order to reconstruct and identify individual particles in complex event topologies. The high spatial granularity, together with analogue energy information, can be further exploited in software compensation. In this approach, the local energy density is used to discriminate electromagnetic and purely hadronic sub-showers within hadron showers in the detector to improve the energy resolution for single particles by correcting for the intrinsic non-compensation of the calorimeter system. This improvement in the single particle energy resolution also results in a better overall jet energy resolution by improving the energy measurement of identified neutral hadrons and improvements in the pattern recognition stage by a more accurate matching of calorimeter energies to tracker measurements. This paper describes the software compensation technique and its implementation in particle flow reconstruction with the Pandora Particle Flow Algorithm (PandoraPFA). The impact of software compensation on the choice of optimal transverse granularity for the analogue hadronic calorimeter option of the International Large Detector (ILD) concept is also discussed. (orig.)

  17. Hybrid compensation arrangement in dispersed generation systems

    DEFF Research Database (Denmark)

    Chen, Zhe; Blaabjerg, Frede; Pedersen, John Kim

    2005-01-01

    are performed for a power system including the dispersed generation units connected into the system through power electronic converters and diode rectifier loads, which produce the distorted waveforms. The simulation results have demonstrated that good compensation effects can be achieved by using the combined...

  18. Temperature-Compensated Clock Skew Adjustment

    Directory of Open Access Journals (Sweden)

    Joaquín Olivares

    2013-08-01

    Full Text Available This work analyzes several drift compensation mechanisms in wireless sensor networks (WSN. Temperature is an environmental factor that greatly affects oscillators shipped in every WSN mote. This behavior creates the need of improving drift compensation mechanisms in synchronization protocols. Using the Flooding Time Synchronization Protocol (FTSP, this work demonstrates that crystal oscillators are affected by temperature variations. Thus, the influence of temperature provokes a low performance of FTSP in changing conditions of temperature. This article proposes an innovative correction factor that minimizes the impact of temperature in the clock skew. By means of this factor, two new mechanisms are proposed in this paper: the Adjusted Temperature (AT and the Advanced Adjusted Temperature (A2T. These mechanisms have been combined with FTSP to produce AT-FTSP and A2T-FTSP. Both have been tested in a network of TelosB motes running TinyOS. Results show that both AT-FTSP and A2T-FTSP improve the average synchronization errors compared to FTSP and other temperature-compensated protocols (Environment-Aware Clock Skew Estimation and Synchronization for WSN (EACS and Temperature Compensated Time Synchronization (TCTS.

  19. Manager, Global Compensation | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The incumbent is a full member of the Division's management team and participates in key strategic and operational discussions and decisions on human resources issues, priorities, systems, processes, performance indicators and budgets. The Manager directs and overseas payroll services and global compensation ...

  20. Digital compensation of nonlinear distortion in loudspeakers

    NARCIS (Netherlands)

    de Vries, Ruurd; Berkhoff, Arthur P.; Slump, Cornelis H.; Herrmann, O.E.

    The authors present a method to compensate for loudspeaker distortion in real time by nonlinear digital signal processing implemented on a digital signal processor (i.e., the TMS320C30 DSP). Based on the literature, an electrical equivalent circuit of an electrodynamic loudspeaker is developed,

  1. 33 CFR 136.235 - Compensation allowable.

    Science.gov (United States)

    2010-07-01

    ... allowable. The amount of compensation allowable is limited to the actual net reduction or loss of earnings or profits suffered. Calculations for net reductions or losses must clearly reflect adjustments for— (a) All income resulting from the incident; (b) All income from alternative employment or business...

  2. Presbyopia compensation: looking for cortical predictors.

    Science.gov (United States)

    Imbeau, Léa; Majzoub, Sadi; Thillay, Alix; Bonnet-Brilhault, Frederique; Pisella, Pierre-Jean; Batty, Magali

    2017-02-01

    New surgical techniques have recently been developed in order to compensate for visual impairment and to improve visual comfort for patients with presbyopia. However, the results are still variable, depending on the correction modality used and/or the patient. The main purpose of this study was to identify predictive electrophysiological markers of postcorrection visual comfort for patients with presbyopia. Thirteen patients with presbyopia (aged between 45 and 60 years) received successive randomised presbyopia compensation with contact lenses supplying monovision (one eye corrected for distance, the other for near vision) and simultaneous vision (progressive lenses). The period for each type of correction lasted for 3 weeks, with a 2-week break without any presbyopia compensation between the two test phases. Examinations were performed at entry (T0) and after each correction modality (Tmono and Tsimult). They included testing for near and distance visual acuity, stereoacuity, binocular contrast sensitivity and electrophysiological recordings (monocular and binocular visual evoked potentials). Follow-up showed no significant differences between the two compensation modalities for either clinical or electrophysiological criteria. However, a significant correlation was found between the difference in TNO score (monovision-simultaneous vision) and the P100 latency evoked by the binocular pattern at T0, suggesting that late P100 latency could be associated with a lesser degree of decrease in stereoacuity with monovision. While our findings do not permit decisions regarding the superiority of one type of compensation over another, these preliminary results support using the P100 latency evoked by binocular patterns as a predictor of postcompensation stereoacuity. NCT02444130, Pre-results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  3. NFR TRIGA package design review report

    Energy Technology Data Exchange (ETDEWEB)

    Clements, M.D.

    1994-08-26

    The purpose of this document is to compile, present and document the formal design review of the NRF TRIGA packaging. The contents of this document include: the briefing meeting presentations, package description, design calculations, package review drawings, meeting minutes, action item lists, review comment records, final resolutions, and released drawings. This design review required more than two meeting to resolve comments. Therefore, there are three meeting minutes and two action item lists.

  4. Coordination mechanism of SaaS service supply chain: Based on compensation contracts

    Directory of Open Access Journals (Sweden)

    Yanli Guo

    2013-09-01

    Full Text Available Purpose: The purpose of this paper is to build new contracts theories of SaaS service supply chain. Software as a Service (SaaS has become a hot topic in this industry . Compared with traditional manufacturing supply chain and general service supply chain, the new IT service supply chain which based on SaaS has characteristics of both service and IT. And SaaS is completely different from traditional software package model. Therefore the classic contracts, which be widely used in traditional manufacturing supply chain, can’t be directly applied in SaaS service supply chain. The necessary way of IT services developing is to study the SaaS service supply chain combining with characteristics of SaaS. Therefore, It focuses on the coordination of SaaS service supply chain. Design/methodology/approach: It tries to answer the following question: how do the ISV motivate SaaS operators to improve the service level through effective contracts mechanism under conditions of asymmetric information. In order to answer these questions, this paper does some researches including: Under the conditions of information asymmetry, supposing the service level (is related to the degree of effort of SaaS operator was private information, we construct model of compensation contract, i.e., to motivate SaaS operator to improve service level through transfer payments of compensation price. Findings and Originality/value: The study finds out that when ISV get to “positive feedback”, instead of the traditional market equilibrium, compensation contract (linear can coordinate satisfactorily the SaaS service supply chain. In the point of “positive feedback”, the marginal revenue equals the marginal cost, but it is not the equilibrium of ISV’profit-maximization. Research limitations/implications: There are some limitations in this research. In the linear compensation contracts, the compensation price is fixed value. If in the contract, we can create a change value

  5. Hermeticity testing of MEMS and microelectronic packages

    CERN Document Server

    Costello, Suzanne

    2013-01-01

    Packaging of microelectronics has been developing since the invention of the transistor in 1947. With the increasing complexity and decreasing size of the die, packaging requirements have continued to change. A step change in package requirements came with the introduction of the Micro-Electro-Mechanical System (MEMS) whereby interactions with the external environment are, in some cases, required.This resource is a rapid, definitive reference on hermetic packaging for the MEMS and microelectronics industry, giving practical guidance on traditional and newly developed test methods. This book in

  6. Yucca Mountain Waste Package Closure System

    Energy Technology Data Exchange (ETDEWEB)

    Herschel Smartt; Arthur Watkins; David Pace; Rodney Bitsoi; Eric Larsen; Timothy McJunkin; Charles Tolle

    2006-04-01

    The current disposal path for high-level waste is to place the material into secure waste packages that are inserted into a repository. The Idaho National Laboratory has been tasked with the development, design, and demonstration of the waste package closure system for the repository project. The closure system design includes welding three lids and a purge port cap, four methods of nondestructive examination, and evacuation and backfill of the waste package, all performed in a remote environment. A demonstration of the closure system will be performed with a full-scale waste package.

  7. Yucca Mountain Waste Package Closure System

    Energy Technology Data Exchange (ETDEWEB)

    shelton-davis; Colleen Shelton-Davis; Greg Housley

    2005-10-01

    The current disposal path for high-level waste is to place the material into secure waste packages that are inserted into a repository. The Idaho National Laboratory has been tasked with the development, design, and demonstration of the waste package closure system for the repository project. The closure system design includes welding three lids and a purge port cap, four methods of nondestructive examination, and evacuation and backfill of the waste package, all performed in a remote environment. A demonstration of the closure system will be performed with a full-scale waste package.

  8. Photolithography and Micro-Fabrication/ Packaging Laboratories

    Data.gov (United States)

    Federal Laboratory Consortium — The Photolithography and Micro-Fabrication/Packaging laboratories provide research level semiconductor processing equipment and facilities that do not require a full...

  9. Best Practice in Policy Package Design

    DEFF Research Database (Denmark)

    Kessler, Florian; Vesela, Jirina; Vencl, Vaclav

    2010-01-01

    This deliverable focuses on the identification and analysis of best practice examples of policy package design. For this purpose a methodology is developed that allows the systematic analysis of both national and EU policy packages. Eight packages were selected and analysed, highlighting...... the factors which supported the design and implementation process in each case. The results of the analysis show which factors led to these cases to be considered best practice. In addition, factors are identified which are not yet part of the generic policy packaging framework presented in earlier OPTIC...

  10. Compensation of the Meyer‐Neldel Compensation Law for H diffusion in minerals

    National Research Council Canada - National Science Library

    Jones, Alan G

    2014-01-01

    The Meyer‐Neldel Rule (MNR), or compensation law, linearly relates the preexponent term to the logarithm of the excitation enthalpy for any process that is thermally driven in an Arrhenian manner, and MNR fits can be used...

  11. 75 FR 66589 - Shareholder Approval of Executive Compensation and Golden Parachute Compensation

    Science.gov (United States)

    2010-10-28

    ... the Economy, Burden on Competition, and Promotion of Efficiency, Competition, and Capital Formation... compensation policies and practices as they relate to risk management and risk-taking incentives, these...

  12. Saccadic compensation for reflexive optokinetic nystagmus just as good as compensation for volitional pursuit.

    Science.gov (United States)

    Harrison, James J; Freeman, Tom C A; Sumner, Petroc

    2015-01-26

    The natural viewing behavior of moving observers ideally requires target-selecting saccades to be coordinated with automatic gaze-stabilizing eye movements such as optokinetic nystagmus. However, it is unknown whether saccade plans can compensate for reflexive movement of the eye during the variable saccade latency period, and it is unclear whether reflexive nystagmus is even accompanied by extraretinal signals carrying the eye movement information that could potentially underpin such compensation. We show that saccades do partially compensate for optokinetic nystagmus that displaces the eye during the saccade latency period. Moreover, this compensation is as good as for displacements due to voluntary smooth pursuit. In other words, the saccade system appears to be as well coordinated with reflexive nystagmus as it is with volitional pursuit, which in turn implies that extraretinal signals accompany nystagmus and are just as informative as those accompanying pursuit. © 2015 ARVO.

  13. Packaging performance evaluation and performance oriented packaging standards for large packages for poison inhalation hazard materials

    Energy Technology Data Exchange (ETDEWEB)

    Griego, N.R.; Mills, G.S.; McClure, J.D. [and others

    1997-07-01

    The U.S. Department of Transportation Research & Special Programs Administration (DOT-RSPA) has sponsored a project at Sandia National Laboratories to evaluate the protection provided by current packagings used for truck and rail transport of materials that have been classified as Poison Inhalation Hazards (PIH) and to recommend performance standards for these PIH packagings. Hazardous materials span a wide range of toxicity and there are many parameters used to characterize toxicity; for any given hazardous material, data are not available for all of the possible toxicity parameters. Therefore, it was necessary to select a toxicity criterion to characterize all of the PIH compounds (a value of the criterion was derived from other parameters in many cases) and to calculate their dispersion in the event of a release resulting from a transportation accident. Methodologies which account for material toxicity and dispersal characteristics were developed as a major portion of this project and applied to 72 PIH materials. This report presents details of the PIH material toxicity comparisons, calculation of their dispersion, and their classification into five severity categories. 16 refs., 5 figs., 7 tabs.

  14. Global patterns and trends in human-wildlife conflict compensation.

    Science.gov (United States)

    Ravenelle, Jeremy; Nyhus, Philip J

    2017-04-25

    Human-wildlife conflict is a major conservation challenge, and compensation for wildlife damage is a widely used economic tool to mitigate this conflict. The effectiveness of this management tool is widely debated. The relative importance of factors associated with compensation success is unclear, and little is known about global geographic or taxonomic differences in the application of compensation programs. We reviewed research on wildlife-damage compensation to determine geographic and taxonomic gaps, analyze patterns of positive and negative comments related to compensation, and assess the relative magnitude of global compensation payments. We analyzed 288 publications referencing wildlife compensation and identified 138 unique compensation programs. These publications reported US$222 million (adjusted for inflation) spent on compensation in 50 countries since 1980. Europeans published the most articles, and compensation funding was highest in Europe, where depredation by wolves and bears was the most frequently compensated damage. Authors of the publications we reviewed made twice as many negative comments as positive comments about compensation. Three-quarters of the negative comments related to program administration. Conversely, three-quarters of the positive comments related to program outcomes. The 3 most common suggestions to improve compensation programs included requiring claimants to employ damage-prevention practices, such as improving livestock husbandry or fencing of crops to receive compensation (n = 25, 15%); modifying ex post compensation schemes to some form of outcome-based performance payment (n = 21, 12%); and altering programs to make compensation payments more quickly (n = 14, 8%). We suggest that further understanding of the strengths and weaknesses of compensation as a conflict-mitigation tool will require more systematic evaluation of the factors driving these opinions and that differentiating process and outcomes and understanding

  15. Deformation compensation in dynamic tomography; Compensation de deformations en tomographie dynamique

    Energy Technology Data Exchange (ETDEWEB)

    Desbat, L. [Universite Joseph Fourier, UMR CNRS 5525, 38 - Grenoble (France); Roux, S. [Universite Joseph Fourier, TIMC-IMAG, In3S, Faculte de Medecine, 38 - Grenoble (France)]|[CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France); Grangeat, P. [CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France)

    2005-07-01

    This work is a contribution to the compensation of motion in tomography. New classes of deformation are proposed, that compensates analytically by an algorithm of a F.B.P. type reconstruction. This work makes a generalisation of the known results for affine deformations, in parallel geometry and fan-beam, to deformation classes of infinite dimension able to include strong non linearities. (N.C.)

  16. The art of packaging: An investigation into the role of color in packaging, marketing, and branding

    National Research Council Canada - National Science Library

    Behzad Mohebbi

    2014-01-01

      The purpose of this study is to contribute to the existing research in the field of packaging and marketing and shed more light on the psychology of colors and their effect on packaging and marketing...

  17. PRIDE Surveillance Projects Data Packaging Project Information Package Specification Version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Kelleher, D. M.; Shipp, R. L.; Mason, J. D.

    2010-08-31

    Information Package Specification version 1.1 describes an XML document format called an information package that can be used to store information in information management systems and other information archives. An information package consists of package information, the context required to understand and use that information, package metadata that describes the information, and XML signatures that protect the information. The information package described in this specification was designed to store Department of Energy (DOE) and National Nuclear Security Administration (NNSA) information and includes the metadata required for that information: a unique package identifier, information marking that conforms to DOE and NNSA requirements, and access control metadata. It is an implementation of the Open Archival Information System (OAIS) Reference Model archival information package tailored to meet NNSA information storage requirements and designed to be used in the computing environments at the Y-12 National Security Complex and at other NNSA sites.

  18. The Innovative Approaches to Packaging – Comparison Analysis of Intelligent and Active Packaging Perceptions in Slovakia

    National Research Council Canada - National Science Library

    Erika Loucanova; Martina Kalamarova; Jan Parobek

    2017-01-01

    .... Using comparative analysis, we monitored the perception of the active packaging functions in comparison to intelligent packaging function among different age categories. We identified the age categories which are most interested in these functions.

  19. Advanced Sensor Arrays and Packaging

    Energy Technology Data Exchange (ETDEWEB)

    Ryter, John Wesley [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Romero, Christopher J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ramaiyan, Kannan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brosha, Eric L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-11

    Novel sensor packaging elements were designed, fabricated, and tested in order to facilitate the transition of electrochemical mixed-potential sensors toward commercialization. Of the two designs completed, the first is currently undergoing field trials, taking direct measurements within vehicle exhaust streams, while the second is undergoing preliminary laboratory testing. The sensors’ optimal operating conditions, sensitivity to hydrogen, and long-­term baseline stability were also investigated. The sensing capabilities of lanthanum chromite (La0.8Sr0.2CrO3) and indium-­doped tin oxide (ITO) working electrodes were compared, and the ITO devices were selected for pre-­commercial field trials testing at a hydrogen fuel cell vehicle fueling station in California. Previous data from that fueling station were also analyzed, and the causes of anomalous baseline drift were identified.

  20. Antimicrobial seafood packaging: a review.

    Science.gov (United States)

    Singh, Suman; Ho Lee, Myung; Park, Lnsik; Shin, Yangjai; Lee, Youn Suk

    2016-06-01

    Microorganisms are the major cause of spoilage in most seafood products; however, only few microbes, called the specific spoilage organisms (SSOs), contribute to the offensive off-flavors associated with seafood spoilage. In food, microbial degradation manifests itself as spoilage, or changes in the sensory properties of a food product, rendering it unsuitable for human consumption. The use of antimicrobial substances can control the general microflora as well as specific microorganisms related to spoilage to provide products with higher safety and better quality. Many antimicrobial compounds have been evaluated in film structures for use in seafood, especially organic acids and their salts, enzymes, bacteriocins; some studies have considered inorganic compounds such as AgSiO2, zinc oxide, silver zeolite, and titanium oxide. The characteristics of some organic antimicrobial packaging systems for seafood and their antimicrobial efficiency in film structures are reviewed in this article.

  1. Printing systems for MEMS packaging

    Science.gov (United States)

    Hayes, Donald J.; Cox, Weldon R.; Wallace, David B.

    2001-10-01

    Ink-jet printing technology is, in many ways, ideally suited for addressing a number of these MEMS device packaging challenges. The general advantages of this form of microdispensing derive from the incorporation of data-driven, non-contact processes which enable precise, picoliter-level volumes of material to be deposited with high accuracy and speed at target sites, even on non-planar surfaces. Being data-driven, microjet printing is a highly flexible and automated process which may readily be incorporated into manufacturing lines. It does not require application-specific tooling such as photomasks or screens, and, as an additive process with no chemical waste, it is environmentally friendly. In short, the advantages obtainable with incorporation of micro-jet printing technology in many fabrication applications range from increased process capability, integration and automation to reduced manufacturing costs.

  2. EFS: an ensemble feature selection tool implemented as R-package and web-application.

    Science.gov (United States)

    Neumann, Ursula; Genze, Nikita; Heider, Dominik

    2017-01-01

    Feature selection methods aim at identifying a subset of features that improve the prediction performance of subsequent classification models and thereby also simplify their interpretability. Preceding studies demonstrated that single feature selection methods can have specific biases, whereas an ensemble feature selection has the advantage to alleviate and compensate for these biases. The software EFS (Ensemble Feature Selection) makes use of multiple feature selection methods and combines their normalized outputs to a quantitative ensemble importance. Currently, eight different feature selection methods have been integrated in EFS, which can be used separately or combined in an ensemble. EFS identifies relevant features while compensating specific biases of single methods due to an ensemble approach. Thereby, EFS can improve the prediction accuracy and interpretability in subsequent binary classification models. EFS can be downloaded as an R-package from CRAN or used via a web application at http://EFS.heiderlab.de.

  3. Nanotechnology: An Untapped Resource for Food Packaging

    Directory of Open Access Journals (Sweden)

    Chetan Sharma

    2017-09-01

    Full Text Available Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector.

  4. Nanotechnology: An Untapped Resource for Food Packaging.

    Science.gov (United States)

    Sharma, Chetan; Dhiman, Romika; Rokana, Namita; Panwar, Harsh

    2017-01-01

    Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector.

  5. MTB-USDH Compensation Tracking System (MTB-CTS)

    Data.gov (United States)

    US Agency for International Development — MTB-USDH Compensation Tracking System: is the USDH Compensation Tracking System (MTB-CTS) to assist managers in monitoring their payroll costs for U.S. direct hires....

  6. Healthy package, healthy product? Effects of packaging design as a function of purchase setting

    NARCIS (Netherlands)

    van Rompay, Thomas Johannes Lucas; Deterink, Florien; Fenko, Anna

    2016-01-01

    Inspired by research testifying to the influence of visual packaging appearance and meaning portrayal on food evaluation, here it is argued that effects of packaging design vary depending on purchase context. Realistic packaging variants for a fictitious yoghurt brand varying in health connotation

  7. Sales compensation governance: the last frontier of corporate reform.

    Science.gov (United States)

    Gundy, Peter R; Gaeta, Elizabeth C

    2004-01-01

    The area of sales compensation has remained relatively untouched by recent pressures for compensation reform. This article highlights some of the ways that sales organizations stumble in managing their compensation programs, and why it takes more than a simple tactical fix to address these problems effectively. The authors describe a more structured governance framework that not only identifies and resolves key sales compensation issues, but ultimately safeguards the effectiveness and financial integrity of the sales organization itself.

  8. Victims' Compensation as a Tool of Therapeutic Justice: Examining the Physical and Mental Health Needs of Victim Compensation Applicants and the Role of Health in Receiving Compensation.

    Science.gov (United States)

    Daigle, Leah E; Guastaferro, Wendy P; Azimi, Andia

    Victims' compensation programs are positioned to serve an important therapeutic role. Their use by persons with physical and mental health problems has not been investigated. This study evaluates the extent to which applicants have physical and mental health needs and whether receiving compensation is related to these needs. Data were part of a larger study designed to assess satisfaction with victim compensation in Georgia. The sample included 500 victim compensation applicants. Individuals were surveyed about their experiences applying for compensation as well as their current wellbeing. Descriptive and multivariate analyses investigated the link between physical and mental health problems and denial of victim compensation. Applicants for crime victim compensation in Georgia experienced a range of physical and mental health problems. Almost half of applicants had been diagnosed with a mental health condition, and 60% had been diagnosed with at least 1 physical health condition. Co-occurring disorders were common. In addition, being denied compensation was significantly related to having a mental health condition and to the number of diagnosed mental health conditions. Crime victim applicants have clear physical and mental health needs. Being denied compensation benefits is related to having a mental health disorder. These results suggest that victim compensation programs can be an intervention point for victims and their families for either receipt of direct service or referral to needed services. In addition, changes in program administration may need to be made to alleviate disparity in award benefit related to mental health status.

  9. [Effect of nitric oxide in vestibular compensation].

    Science.gov (United States)

    Jiang, Zi-dong; Zhang, Lian-shan

    2003-10-01

    To study the effect of nitric oxide (NO) in vestibular compensation after unilateral vestibular deafferentation. Eighteen animals were divided into two groups, 6 of group a as control, 12 of group b received gentamicin intratympanic injection in the left ear. Half of the animals were killed respectively after 5 days and 10 days. Vestibular endorgan and brainstem tissue sections were subjected to NADPH-d reactive test of NOS for histochemical examination. In group a, NOS-like reactivity in both sides of vestibular endorgan and nucli. In group b during 5 days, NOS-like reactivity in right side of vestibular endorgan and nucli, those of the left side were negative. During 10 days, NOS-like reactivity only in the right side of vestibular endorgan. Changes of NOS expression in the contralateral vestibular nucli might have played a role in vestibular compensation.

  10. Improving calorimeter resolution using temperature compensation calculations

    Science.gov (United States)

    Smiga, Joseph; Purschke, Martin

    2017-01-01

    The sPHENIX experiment is an upgrade of the existing PHENIX apparatus at the Relativistic Heavy-Ion Collider (RHIC). The new detector improves upon measurements of various physical processes, such as jets of particles created during heavy-ion collisions. Prototypes of various calorimeter components were tested at the Fermilab Test Beam Facility (FTBF). This analysis tries to compensate the effects of temperature drifts in the silicon photomultipliers (SiPMs). Temperature data were used to calculate an appropriate compensation factor. This analysis will improve the achievable resolution and will also determine how accurately the temperature must be controlled in the final experiment. This will improve the performance of the calorimeters in the sPHENIX experiment. This project was supported in part by the U.S. Department of Energy, Office of Science, Office of Workforce Development for Teachers and Scientists (WDTS) under the Science Undergraduate Laboratory Internships Program (SULI).

  11. Phase Noise Compensation for OFDM Systems

    Science.gov (United States)

    Leshem, Amir; Yemini, Michal

    2017-11-01

    We describe a low complexity method for time domain compensation of phase noise in OFDM systems. We extend existing methods in several respects. First we suggest using the Karhunen-Lo\\'{e}ve representation of the phase noise process to estimate the phase noise. We then derive an improved datadirected choice of basis elements for LS phase noise estimation and present its total least square counterpart problem. The proposed method helps overcome one of the major weaknesses of OFDM systems. We also generalize the time domain phase noise compensation to the multiuser MIMO context. Finally we present simulation results using both simulated and measured phased noise. We quantify the tracking performance in the presence of residual carrier offset.

  12. Compensating for telecommunication delays during robotic telerehabilitation.

    Science.gov (United States)

    Consoni, Leonardo J; Siqueira, Adriano A G; Krebs, Hermano I

    2017-07-01

    Rehabilitation robotic systems may afford better care and telerehabilitation may extend the use and benefits of robotic therapy to the home. Data transmissions over distance are bound by intrinsic communication delays which can be significant enough to deem the activity unfeasible. Here we describe an approach that combines unilateral robotic telerehabilitation and serious games. This approach has a modular and distributed design that permits different types of robots to interact without substantial code changes. We demonstrate the approach through an online multiplayer game. Two users can remotely interact with each other with no force exchanges, while a smoothing and prediction algorithm compensates motions for the delay in the Internet connection. We demonstrate that this approach can successfully compensate for data transmission delays, even when testing between the United States and Brazil. This paper presents the initial experimental results, which highlight the performance degradation with increasing delays as well as improvements provided by the proposed algorithm, and discusses planned future developments.

  13. Inflight parity vector compensation for FDI

    Science.gov (United States)

    Hall, S. R.; Motyka, P.; Gai, E.; Deyst, J. J., Jr.

    The performance of a failure detection and isolation (FDI) algorithm applied to a redundant strapdown inertial measurement unit (IMU) is limited by sensor errors such as input axis misalignment, scale factor errors, and biases. This paper presents a technique for improving the performance of FDI algorithms applied to redundant strapdown IMUs. A Kalman filter provides estimates of those linear combinations of sensor errors that affect the parity vector. These estimates are used to form a compensated parity vector which does not include the effects of sensor errors. The compensated parity vector is then used in place of the uncompensated parity vector to make FDI decisions. Simulation results are presented in which the algorithm is tested in a realistic flight environment that includes vehicle maneuvers, the effects of turbulence, and sensor failures. The results show that the algorithm can significantly improve FDI performance, especially during vehicle maneuvers.

  14. Zero energy buildings and mismatch compensation factors

    DEFF Research Database (Denmark)

    Lund, Henrik; Marszal, Anna Joanna; Heiselberg, Per

    2011-01-01

    of the energy production unit. Based on historical data for the electricity supply area in western Denmark, this paper makes a first attempt to quantify mismatch compensation factors. The results indicate that such compensation factors are a little below one for buildings with photovoltaics (PV) and a little......This paper takes an overall energy system approach to analysing the mismatch problem of zero energy and zero emission buildings (ZEBs). The mismatch arises from hourly differences in energy production and consumption at the building level and results in the need for exchange of electricity via...... the public grid even though the building has an annual net-exchange of zero. This paper argues that, when looked upon from the viewpoint of the overall electricity supply system, a mismatch can be both negative and positive. Moreover, there are often both an element of levelling out mismatches between...

  15. Packaging of airborne and spaceborne electronics

    Energy Technology Data Exchange (ETDEWEB)

    Pirzl, William H.

    1964-05-01

    The paper was prepared as a survey of problems associated with packaging of airborne and spaceborne electronics. Included is a discussion of the steps which must be taken in order to withstand applicable environmental conditions. Emphasis is placed on discussion of vibration, temperature control, radiation and electromagnetic compatibility of the packaged units.

  16. Development in the Active Packaging of Foods

    African Journals Online (AJOL)

    into, barrier packaging such as crown caps, plastic or metal closures, is ascorbate oxidation of flavour [13]} The Pillsbury Co. “hold a 1994 patent that also utilizes ..... superabsorbent polymer in between two layers. Large sheets are also used for absorption _of melted ice in package of seafood during air transportation. The.

  17. An expression analysis package for REDUCE

    NARCIS (Netherlands)

    van Hulzen, J.A.; Hulshof, B.J.A.

    1982-01-01

    An expression analysis package for REDUCE 2 is presented. This package, completely written in Standard LISP, can be considered as an extension of the algebraic mode. It allows to interactively dismantled and/or modify the last output expression as it is desplayed or printed. An interface with the

  18. A Thermodynamics Course Package in Onenote

    Science.gov (United States)

    Falconer, John L.; Nicodemus, Garret D.; Medlin, J. Will; deGrazia, Janet; McDanel, Katherine P.

    2014-01-01

    A ready-to-use package of active-learning materials for a semester-long chemical engineering thermodynamics course was prepared for instructors, and similar materials are being prepared for a material and energy balance course. The course package includes ConcepTests, explanations of the ConcepTests for instructors, links to screencasts, chapter…

  19. Wrap-Attack Pack: Product Packaging Exercise

    Science.gov (United States)

    Lee, Seung Hwan; Hoffman, K. Douglas

    2016-01-01

    Although many marketing courses discuss traditional concepts pertaining to product strategy, concepts specifically relating to packaging are often glossed over. This exercise, "Wrap-Attack Pack," teaches students about the utilitarian and hedonic design elements of packaging. More specifically, the primary objective is to creatively…

  20. The power of symbolic packaging cues

    NARCIS (Netherlands)

    van Ooijen, I.; Verlegh, P.; Voorveld, H.; Eisend, M.

    2016-01-01

    Packaging can be considered as an element of communication in the marketplace. By communicating through packaging, marketers are able to appeal to consumers at the most crucial moment in the consumer decision journey: the point of sale. At the point of sale, consumers are able to consider the

  1. 49 CFR 173.63 - Packaging exceptions.

    Science.gov (United States)

    2010-10-01

    ..., incendiary, or detonating explosive projectiles; (iv) Ammunition not exceeding 12.7 mm (50 caliber or 0.5... outside packagings; (iv) Maximum gross weight is limited to 30 kg (66 pounds) per package; and (v) Cartridges, power devices which are used to project fastening devices and 22 caliber rim-fire cartridges may...

  2. 21 CFR 820.130 - Device packaging.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Device packaging. 820.130 Section 820.130 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES... shall ensure that device packaging and shipping containers are designed and constructed to protect the...

  3. Packaging Materials Outgassing Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R. A. [Oak Ridge Y-12 Plant (Y-12), Oak Ridge, TN (United States)

    2006-09-26

    An outgassing study was conducted on two polyurethane packaging foams, two polymer bottles (polytetrafluoroethylene and polyethylene), and two polymer lids. The purpose was to measure the volume of gases that diffuse from these packaging materials at a maximum of 400-degrees F when stored in ambient air within sealed containers.

  4. Material Efficiency in Dutch Packaging Policy

    NARCIS (Netherlands)

    Worrell, E.|info:eu-repo/dai/nl/106856715; van Sluisveld, M.A.E.

    2013-01-01

    Packaging materials are one of the largest contributors to municipal solid waste generation. In this paper, we evaluate the material impacts of packaging policy in The Netherlands, focusing on the role of material efficiency (or waste prevention). Since 1991, five different policies have been

  5. Reliability of industrial packaging for microsystems

    DEFF Research Database (Denmark)

    Reus, Roger De; Christensen, Carsten; Weichel, Steen

    1998-01-01

    Packaging concepts for silicon-based micromachined sensors exposed to harsh environments are explored. By exposing the sensors directly to the media and applying protection at the wafer level the packaging and assembly will be simplified as compared to conventional methods of fabrication. Protect...

  6. Ceramic ball grid array package stress analysis

    Science.gov (United States)

    Badri, S. H. B. S.; Aziz, M. H. A.; Ong, N. R.; Sauli, Z.; Alcain, J. B.; Retnasamy, V.

    2017-09-01

    The ball grid array (BGA), a form of chip scale package (CSP), was developed as one of the most advanced surface mount devices, which may be assembled by an ordinary surface ball bumps are used instead of plated nickel and gold (Ni/Au) bumps. Assembly and reliability of the BGA's printed circuit board (PCB), which is soldered by conventional surface mount technology is considered in this study. The Ceramic Ball Grid Array (CBGA) is a rectangular ceramic package or square-shaped that will use the solder ball for external electrical connections instead of leads or wire for connections. The solder balls will be arranged in an array or grid at the bottom of the ceramic package body. In this study, ANSYS software is used to investigate the stress on the package for 2 balls and 4 balls of the CBGA package with the various force range of 1-3 Newton applied to the top of the die, top of the substrate and side of the substrate. The highest maximum stress was analyzed and the maximum equivalent stress was observed on the solder ball and the die. From the simulation result, the CBGA package with less solder balls experience higher stress compared to the package with many solder balls. Therefore, less number of solder ball on the CBGA package results higher stress and critically affect the reliability of the solder balls itself, substrate and die which can lead to the solder crack and also die crack.

  7. Effect of Modified Atmosphere Packaging on Microbiological ...

    African Journals Online (AJOL)

    Optimum packaging film for carrots should lead to low condensation, but preventing moisture loss, and maintain optimum gas composition during the storage period. In this study, carrots were packaged in polypropylene (PP) and low density polyethylene (LDPE) films and stored at 0¼C and ambient temperature (15-25¼C).

  8. 19 CFR 134.53 - Examination packages.

    Science.gov (United States)

    2010-04-01

    ... TREASURY COUNTRY OF ORIGIN MARKING Articles Found Not Legally Marked § 134.53 Examination packages. (a) Site of marking—(1) Customs custody. Articles (or containers) in examination packages may be marked by... the public stores. (2) Importer's premises or elsewhere. If it is impracticable to mark the articles...

  9. Pre-packaged applications in business reorganisations ...

    African Journals Online (AJOL)

    This study aims to explore the operating environment of pre-packaged financing in various established reorganisation regimes, including the legal framework, practice, enablers, context and other governing structures. Pre-packaging in the United States, United Kingdom, Australia and Canada was examined with a view to ...

  10. Clustering Classes in Packages for Program Comprehension

    Directory of Open Access Journals (Sweden)

    Xiaobing Sun

    2017-01-01

    Full Text Available During software maintenance and evolution, one of the important tasks faced by developers is to understand a system quickly and accurately. With the increasing size and complexity of an evolving system, program comprehension becomes an increasingly difficult activity. Given a target system for comprehension, developers may first focus on the package comprehension. The packages in the system are of different sizes. For small-sized packages in the system, developers can easily comprehend them. However, for large-sized packages, they are difficult to understand. In this article, we focus on understanding these large-sized packages and propose a novel program comprehension approach for large-sized packages, which utilizes the Latent Dirichlet Allocation (LDA model to cluster large-sized packages. Thus, these large-sized packages are separated as small-sized clusters, which are easier for developers to comprehend. Empirical studies on four real-world software projects demonstrate the effectiveness of our approach. The results show that the effectiveness of our approach is better than Latent Semantic Indexing- (LSI- and Probabilistic Latent Semantic Analysis- (PLSA- based clustering approaches. In addition, we find that the topic that labels each cluster is useful for program comprehension.

  11. Cigarette package design: opportunities for disease prevention

    Directory of Open Access Journals (Sweden)

    Pollay RW

    2003-01-01

    Full Text Available Abstract Objective To learn how cigarette packages are designed and to determine to what extent cigarette packages are designed to target children. Methods A computer search was made of all Internet websites that post tobacco industry documents using the search terms: packaging, package design, package study, box design, logo, trademark and design study. All documents were retrieved electronically and analyzed by the first author for recurrent themes. Data Synthesis Cigarette manufacturers devote a great deal of attention and expense to package design because it is central to their efforts to create brand images. Colors, graphic elements, proportioning, texture, materials and typography are tested and used in various combinations to create the desired product and user images. Designs help to create the perceived product attributes and project a personality image of the user with the intent of fulfilling the psychological needs of the targeted type of smoker. The communication of these images and attributes is conducted through conscious and subliminal processes. Extensive testing is conducted using a variety of qualitative and quantitative research techniques. Conclusion The promotion of tobacco products through appealing imagery cannot be stopped without regulating the package design. The same marketing research techniques used by the tobacco companies can be used to design generic packaging and more effective warning labels targeted at specific consumers.

  12. 75 FR 36395 - Guidance on Sound Incentive Compensation Policies

    Science.gov (United States)

    2010-06-25

    ... design and assessment of incentive compensation arrangements. Compensation for risk-management and... with effective controls and risk-management; and Be supported by strong corporate governance, including... compensation arrangements with their risk-management and internal control frameworks to better monitor and...

  13. 26 CFR 1.85-1 - Unemployment compensation.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Unemployment compensation. 1.85-1 Section 1.85-1...) INCOME TAXES (CONTINUED) Items Specifically Included in Gross Income § 1.85-1 Unemployment compensation... unemployment compensation (as defined in paragraph (b)(1) of this section) paid in taxable years beginning...

  14. 45 CFR 302.65 - Withholding of unemployment compensation.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false Withholding of unemployment compensation. 302.65... HUMAN SERVICES STATE PLAN REQUIREMENTS § 302.65 Withholding of unemployment compensation. The State plan... State agency charged with the administration of the State unemployment compensation laws in accordance...

  15. 31 CFR 30.0 - Executive compensation and corporate governance.

    Science.gov (United States)

    2010-07-01

    ... governance. 30.0 Section 30.0 Money and Finance: Treasury Office of the Secretary of the Treasury TARP STANDARDS FOR COMPENSATION AND CORPORATE GOVERNANCE § 30.0 Executive compensation and corporate governance. The following questions and answers reflect the executive compensation and corporate governance...

  16. Assessment of Wetland Valuation Processes for Compensation in ...

    African Journals Online (AJOL)

    The issue of compensation has been debated in various fora; however compensation on wetland resources has not been given the primary place. Wetland valuation like any other type of valuation requires going through stages, which may be more complex than real estate valuation for compensation. This study therefore ...

  17. 28 CFR 301.301 - Compensable and noncompensable injuries.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Compensable and noncompensable injuries... Compensable and noncompensable injuries. (a) No compensation for work-related injuries resulting in physical... injuries or claims alleging improper medical treatment of a work-related injury. This ordinarily includes...

  18. 38 CFR 3.701 - Elections of pension or compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Elections of pension or compensation. 3.701 Section 3.701 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation Concurrent Benefits and Elections...

  19. An EMTDC Model of a Three Level four MVAR Compensator

    DEFF Research Database (Denmark)

    Rasmussen, Tonny Wederberg

    1997-01-01

    The paper discusses the dynamic characteristics of a three level ±4mvar solid state var compensator which is built and will be used for dynamic reactive power compensation in a wind farm. An investigation has been carried out of the influence of the compensator reactor, the DC intermediate voltag...

  20. 42 CFR 413.102 - Compensation of owners.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Compensation of owners. 413.102 Section 413.102... § 413.102 Compensation of owners. (a) Principle. A reasonable allowance of compensation for services of owners is an allowable cost provided that the services are actually performed in a necessary function. (b...

  1. Compensation for occupational lung disease in non-mining industry ...

    African Journals Online (AJOL)

    Compensation for occupational lung disease in non-mining industry. KC Goodman, D Rees, RS Arkles. Abstract. The course from claim submission (by the National Centre for Occupational Health (NCOH)) to compensation (by the Workmen's Compensation Commissioner (WCC)) in 56 cases of occupational disease (OD) ...

  2. Compensation for occupational lung disease in non-mining industry ...

    African Journals Online (AJOL)

    Compensation for occupational lung disease in non-mining industry. K.C. Goodman, D Rees, R.S. Arkles. Abstract. The course from claim submission (by the National Centre for Occupational Health (NCOH)) to compensation (by the Workmen's Compensation Commissioner (WCC)) in 56 cases of occupational disease ...

  3. Temperature compensation of resonant cavities with a teflon post

    OpenAIRE

    Bará Temes, Francisco Javier

    1982-01-01

    The negative temperature coefficient of E for teflon is used to compensate the frequency drift of a metal cavity due to thermal expansion. An experimental X-band transmission resonator was compensated in this way with a 10 mm teflon post. The results are considered of great interest for the compensation of waveguide millimiter wave oscillators. Peer Reviewed

  4. 10 CFR 39.53 - Energy compensation source.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which is...

  5. Feature-based engineering of compensations in web service environment

    DEFF Research Database (Denmark)

    Schaefer, Michael; Dolog, Peter

    2009-01-01

    requirements and constraints regarding compensation. The feature models are being used in order to configure the compensation operations that are applied. In this way, we ensure that the compensation actions are limited to the prescribed ones,and the infrastructure which uses them can be adapted easily in case...

  6. Can an Advance Organizer Technique Compensate for Poor Reading Conditions?

    Science.gov (United States)

    Stallings, Shellie L.; Derry, Sharon J.

    1986-01-01

    Two experiments investigate whether advance organizers (1) help subjects with good reasoning skills compensate for poor memory or information overload; and (2) compensate for distractions. Findings suggest that the organizer technique does not help compensate for processing deficits related to information overload or distracting study conditions.…

  7. 38 CFR 3.461 - Dependency and indemnity compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Dependency and indemnity... ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation Apportionments § 3.461 Dependency...'s award of dependency and indemnity compensation will be apportioned where there is a child or...

  8. 38 CFR 3.250 - Dependency of parents; compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Dependency of parents... ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation Dependency, Income and Estate § 3.250 Dependency of parents; compensation. (a) Income—(1) Conclusive dependency. Dependency of a parent...

  9. 38 CFR 3.658 - Offsets; dependency and indemnity compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Offsets; dependency and... AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation Adjustments and Resumptions § 3.658 Offsets; dependency and indemnity compensation. (a) When an award of dependency and...

  10. 38 CFR 3.702 - Dependency and indemnity compensation.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Dependency and indemnity... ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation Concurrent Benefits and Elections § 3.702 Dependency and indemnity compensation. (a) Right to elect. A person who is eligible for death...

  11. Compensation for gravitational sag of bent mirror

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Chengwen; Jiang, Hui; He, Yan; Liang, Dongxu; Lan, Xuying; Yan, Shuai [Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, CAS, Shanghai 201800 (China); Shu, De-ming [Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Li, Aiguo, E-mail: aiguo.li@sinap.ac.cn [Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, CAS, Shanghai 201800 (China)

    2017-05-01

    The gravitational sag of aspheric bent mirrors with face-up or face-down geometry produces a nonnegligible optical error. As an effective compensation, width optimization is used to match the combined effects of the gravitational and bending moments. This method is described by analytical expressions and two calculation algorithms. The results of theoretical simulations and finite element analysis have proved that this method can reduce the slope error resulting from gravitational sag to the level of nano radians.

  12. NUCLEATION AND ENTROPY COMPENSATION IN BIOLOGICAL ASSEMBLY

    OpenAIRE

    Frank A. Ferrone

    2012-01-01

    The assembly of molecules from solution into larger aggregates de-activates their independent rotational and translational motion, which would represent an insuperable penalty in free energy without a compensatory mechanism for regaining at least some of the lost entropy. Such compensation is provided by the internal rigidbody motion of molecules in protein aggregates such as polymers and crystals. While the concepts behind the contributions of these entropic elements, known as vi...

  13. Compensation and Honesty: Gender Differences in Lying

    OpenAIRE

    Nieken, Petra; Dato, Simon

    2016-01-01

    We compare gender differences in lying under two incentive schemes that are widely used in companies: individual performance-pay and tournament incentives. While we do not observe significantly different behavior of males and females given individual performance-pay, females lie significantly less than males if the compensation scheme is switched to tournament incentives. This result is mainly driven by a decrease in the propensity to lie of females in a competitive environment. The gender ga...

  14. PRIDE Surveillance Projects Data Packaging Project, Information Package Specification Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Kelleher, D.M.; Shipp, R. L.; Mason, J. D.

    2009-09-28

    This document contains a specification for a standard XML document format called an information package that can be used to store information and the context required to understand and use that information in information management systems and other types of information archives. An information package consists of packaged information, a set of information metadata that describes the packaged information, and an XML signature that protects the packaged information. The information package described in this specification was designed to be used to store Department of Energy (DOE) and National Nuclear Security Administration (NNSA) information and includes the metadata required for that information: a unique package identifier, information marking that conforms to DOE and NNSA requirements, and access control metadata. Information package metadata can also include information search terms, package history, and notes. Packaged information can be text content, binary content, and the contents of files and other containers. A single information package can contain multiple types of information. All content not in a text form compatible with XML must be in a text encoding such as base64. Package information is protected by a digital XML signature that can be used to determine whether the information has changed since it was signed and to identify the source of the information. This specification has been tested but has not been used to create production information packages. The authors expect that gaps and unclear requirements in this specification will be identified as this specification is used to create information packages and as information stored in information packages is used. The authors expect to issue revised versions of this specification as needed to address these issues.

  15. Vacuum maintenance in hermetically sealed MEMs packages

    Science.gov (United States)

    Corazza, Alessio; Kullberg, Richard C.

    1998-09-01

    Packages for many high sensitivity MEM devices (Micro- Electro-Mechanical devices) such as accelerometers need to operate in a vacuum in order to obtain their full performance. This vacuum is destroyed by the outgassing of species such as hydrogen and water vapor from the surfaces of the package exposed to this vacuum. To control this outgassing a getter is needed. MEM packages are too small to accommodate traditional sintered porous getters. A solution has been developed using a high porosity thick film getter material. The getter consists of a highly porous, mechanically stable, getter coating on a metal substrate. This getter reacts with active gases such as water vapor, hydrogen, oxygen, nitrogen, and carbon monoxide that outgas from the inner surfaces of the package. The physical characteristics and performance of this material will be demonstrated per ASTM sorption testing. The results of this testing will be used to demonstrate the potential for vacuum performance in a real world MEM package.

  16. Service Packages – Attractiveness Has Many Faces

    Directory of Open Access Journals (Sweden)

    Ilona Bondos

    2016-01-01

    Full Text Available This article is an attempt to identify the impact of the customer age (especially the Baby boomers generation and the X and the Y generation on the assessment of incentives to buy service package. Belonging to different age generations seems to be important for the effectiveness of service packages sales – the entrance by the consumers in subsequent phases of the life cycle is related to their perception of the market offer. The starting point for the empirical part of the article was to analyze the different average scores attractiveness of the ten packages service features (incentives to purchase. Then, using multidimensional scaling authors determined the similarity or dissimilarity data on a set of applied incentives to use service packages. Visible differences indicate a different perception of the attractiveness of packages representatives of the Baby boomer generation and Y generation. Managerial implications and directions for future research are discussed.

  17. Dynamic modelling of packaging material flow systems.

    Science.gov (United States)

    Tsiliyannis, Christos A

    2005-04-01

    A dynamic model has been developed for reused and recycled packaging material flows. It allows a rigorous description of the flows and stocks during the transition to new targets imposed by legislation, product demand variations or even by variations in consumer discard behaviour. Given the annual reuse and recycle frequency and packaging lifetime, the model determines all packaging flows (e.g., consumption and reuse) and variables through which environmental policy is formulated, such as recycling, waste and reuse rates and it identifies the minimum number of variables to be surveyed for complete packaging flow monitoring. Simulation of the transition to the new flow conditions is given for flows of packaging materials in Greece, based on 1995--1998 field inventory and statistical data.

  18. Can packaging elements elicit consumers’ emotional responses?

    DEFF Research Database (Denmark)

    Liao, Lewis; Corsi, Armando; Lockshin, Larry

    Emotion has been an important concept in many areas of consumer research such as judgment, decision-making and advertising. Little research has been done on emotion in packaging adopting the physiological measures used in other areas. This paper draws on past studies in advertising that measure...... emotional responses toward image, colour and font, and apply them to packaging research. The study tests the extent at which packaging can elicit consumers’ spontaneous emotional response for each of those three elements, by using skin conductance, facial electromyography (EMG) and selfassessment scales....... The results show that packaging can elicit an emotional response via different elements. The paper also raises concerns about the accuracy of using selfreport measures of emotional responses to packaging research....

  19. Does 'Plain Packaging' of Tobacco matter?

    Directory of Open Access Journals (Sweden)

    Luke Clancy

    2016-03-01

    Full Text Available The incremental tightening of the tobacco industry’s advertising capabilities led to the investment of billions of dollars into increasingly creative packaging. Today, packing remains one of the industry’s sole methods of promotion and marketing. The size, shape, colour, and font on cigarette packs serve to differentiate brands and promote a certain image associated with the given cigarette package Many studies in recent years have tested the association between pack standardisation and peoples’ attitudes, behaviours, and perceptions of tobacco packaging. The results show that plain packs are thought to be less attractive and associated with less positive characteristics, the health warnings are more salient, and smokers report feelings of wanting to smoke less when using standardised packs. Now we have the real life results from Australia, which show the tobacco control advances that are possible with standardised packaging. This must increase the pressure to have 'plain packaging' introduced throughout the EU.

  20. Radiation treatment for sterilization of packaging materials

    Science.gov (United States)

    Haji-Saeid, Mohammad; Sampa, Maria Helena O.; Chmielewski, Andrzej G.

    2007-08-01

    Treatment with gamma and electron radiation is becoming a common process for the sterilization of packages, mostly made of natural or synthetic plastics, used in the aseptic processing of foods and pharmaceuticals. The effect of irradiation on these materials is crucial for packaging engineering to understand the effects of these new treatments. Packaging material may be irradiated either prior to or after filling. The irradiation prior to filling is usually chosen for dairy products, processed food, beverages, pharmaceutical, and medical device industries in the United States, Europe, and Canada. Radiation effects on packaging material properties still need further investigation. This paper summarizes the work done by different groups and discusses recent developments in regulations and testing procedures in the field of packaging technology.

  1. Optimization of Train Trip Package Operation Scheme

    Directory of Open Access Journals (Sweden)

    Lu Tong

    2015-01-01

    Full Text Available Train trip package transportation is an advanced form of railway freight transportation, realized by a specialized train which has fixed stations, fixed time, and fixed path. Train trip package transportation has lots of advantages, such as large volume, long distance, high speed, simple forms of organization, and high margin, so it has become the main way of railway freight transportation. This paper firstly analyzes the related factors of train trip package transportation from its organizational forms and characteristics. Then an optimization model for train trip package transportation is established to provide optimum operation schemes. The proposed model is solved by the genetic algorithm. At last, the paper tests the model on the basis of the data of 8 regions. The results show that the proposed method is feasible for solving operation scheme issues of train trip package.

  2. Optical compensation device for chest film radiography

    Science.gov (United States)

    Gould, Robert G.; Hasegawa, Bruce H.; DeForest, Sherman E.; Schmidt, Gregory W.; Hier, Richard G.

    1990-07-01

    Although chest radiography is the most commonly performed radiographic examination and one of the most valuable and cost-effective studies in medicine it suffers from relatively high error rates in both missing pathology and false positive interpretations. Detectability of lung nodules and other structures in underpenetrated regions of the chest film can be improved by both exposure and optical compensation but current compensation systems require major capital cost or a significant change in normal clinical practice. A new optical compensation system called the " Intelligent X-Ray Illuminator" (IXI) automatically and virtually instantaneously generates a patient-specific optical unsharp mask that is projected directly on a radiograph. When a radiograph is placed on the IXI which looks much like a conventional viewbox it acquires a low-resolution electronic image of this film from which the film transmission is derived. The transmission information is inverted and blurred in an image processor to form an unsharp mask which is fed into a spatial light modulator (SLM) placed between a light source and the radiograph. The SLM tailors the viewbox luminance by decreasing illumination to underexposed (i. e. transmissive) areas of the radiograph presenting the observer with an optically unsharp-masked image. The IXI uses the original radiograph and will allow it to be viewed on demand with conventional (uniform illumination. Potentially the IXI could introduce the known beneficial aspects of optical unsharp masking into radiology at low capital

  3. Doppler Shift Compensation Schemes in VANETs

    Directory of Open Access Journals (Sweden)

    F. Nyongesa

    2015-01-01

    Full Text Available Over the last decade vehicle-to-vehicle (V2V communication has received a lot of attention as it is a crucial issue in intravehicle communication as well as in Intelligent Transportation System (ITS. In ITS the focus is placed on integration of communication between mobile and fixed infrastructure to execute road safety as well as nonsafety information dissemination. The safety application such as emergence alerts lays emphasis on low-latency packet delivery rate (PDR, whereas multimedia and infotainment call for high data rates at low bit error rate (BER. The nonsafety information includes multimedia streaming for traffic information and infotainment applications such as playing audio content, utilizing navigation for driving, and accessing Internet. A lot of vehicular ad hoc network (VANET research has focused on specific areas including channel multiplexing, antenna diversity, and Doppler shift compensation schemes in an attempt to optimize BER performance. Despite this effort few surveys have been conducted to highlight the state-of-the-art collection on Doppler shift compensation schemes. Driven by this cause we survey some of the recent research activities in Doppler shift compensation schemes and highlight challenges and solutions as a stock-taking exercise. Moreover, we present open issues to be further investigated in order to address the challenges of Doppler shift in VANETs.

  4. REACTIVE POWER COMPENSATOR WITH SMOOTH CONTROL

    Directory of Open Access Journals (Sweden)

    V. V. Burlaka

    2014-12-01

    Full Text Available Reactive power compensation devices are widely used: thyristor-control reactors (TCR and thyristor-switched capacitors (TSC. The TCR disadvantages are discussed. The TSC disadvantages are: influence of higher harmonics on nonsinusoidal voltage power system, the inability to ensure the smooth regulation. The proposed reactive power compensator consists of series with active filter and capacitors with step switch. Reactive power compensator’s control system is proposed. Hysteretic control of the inverter with current feedback is applied. DC-voltage regulator provides balance of active power. The control system allows overcompensation or undercompensation of reactive power modes. Reactive power distribution regulator performs the redistribution of power between switching capacitors and active filter. Minimization condition of this regulator is active filter’s power. Adjustment properties of reactive power compensator are analyzed. The choice of relations between the capacitors TSC steps to minimize the installed capacity of the active filter and the number of stages in TSC is considered. The approach that makes possible to «isolate» capacitors from harmonic currents and provide smooth control of reactive power is proposed

  5. 76 FR 51257 - First-Class Package Service

    Science.gov (United States)

    2011-08-18

    ... Package Service, Periodicals, and Package Services pieces addressed to a discontinued Post Office may be... have all Express Mail, Priority Mail, First-Class Mail, First-Class Package Service, Periodicals, and... Personnel All Express Mail, First-Class Mail, First-Class Package Service, Periodicals, and Package Services...

  6. IFT Scientific Status Summary 2008: Innovative Food Packaging Solutions

    Science.gov (United States)

    Food and beverage packaging comprises 55-65% of the $110 billion value of packaging in the United States. This review provides a summary of innovative technology developments in food packaging. The expanded role of food and beverage packaging is reviewed. Active and intelligent food packaging, ba...

  7. Directory of certificates of compliance for radioactive materials packages. Summary report of NRC approved packages

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-10-01

    This directory contains a Summary Report of NRC Approved Packages for radioactive material packages effective September 14, 1979. Purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory.

  8. Interconnect mechanisms in microelectronic packaging

    Science.gov (United States)

    Roma, Maria Penafrancia C.

    alloy showed differences in adhesion strength and IMC formation. Bond strength by wire pull testing showed the 95Ag alloy with higher values while shear bond testing showed the 88Ag higher bond strength. Use of Cu pillars in flip chips and eutectic bonding in wafer level chip scale packages are direct consequences of diminishing interconnect dimension as a result of the drive for miniaturization. The combination of Cu-Sn interdiffusion, Kirkendall mechanism and heterogeneous vacancy precipitation are the main causes of IMC and void formation in Cu pillar - Sn solder - Cu lead frame sandwich structure. However, adding a Ni barrier agent showed less porous IMC layer as well as void formation as a result of the modified Cu and Sn movement well as the void formation. Direct die to die bonding using Al-Ge eutectic bonds is necessary when 3D integration is needed to reduce the footprint of a package. Hermeticity and adhesion strength are a function of the Al/Ge thickness ratio, bonding pressure, temperature and time. Scanning Electron Microscope (SEM) and Focused Ion Beam (FIB) allowed imaging of interfacial microstructures, porosity, grain morphology while Scanning Transmission Electron microscope (STEM) provided diffusion profile and confirmed interdiffusion. Ion polishing technique provided information on porosity and when imaged using backscattered mode, grain structure confirmed mechanical deformation of the bonds. Measurements of the interfacial bond strength are made by wire pull tests and ball shear tests based on existing industry standard tests. However, for the Al-Ge eutectic bonds, no standard strength is available so a test is developed using the stud pull test method using the Dage 4000 Plus to yield consistent results. Adhesion strengths of 30-40 MPa are found for eutectic bonded packages however, as low as 20MPa was measured in low temperature bonded areas.

  9. Genetic algorithms for optimal reactive power compensation planning on the national grid system

    Science.gov (United States)

    Pilgrim, J. D.

    This work investigates the use of Genetic Algorithms (GAs) for optimal Reactive power Compensation Planning (RCP) of practical power systems. In particular, RCP of the transmission system of England and Wales as owned and operated by National Grid is considered. The GA is used to simultaneously solve both the siting problem---optimisation of the installation of new devices---and the operational problem---optimisation of preventive transformer taps and the controller characteristics of dynamic compensation devices. A computer package called Genetic Compensation Placement (GCP) has been developed which uses an Integer coded GA (IGA) to solve the RCP problem. The RCP problem is implemented as a multi-objective optimisation: in the interests of security, the number of system and operational constraint violations and the deviation of the busbar voltages from the ideal are all minimised for the base (intact) case and the contingent cases. In the interests of cost reduction, the reactive power cost is minimised for the base case. The reactive power cost encompasses the costs incurred from the installation of reactive power sources and the utilisation of new and existing dynamic reactive power compensation devices. GCP is compared to SCORPION (a planning program currently being used by National Grid) which uses a combination of linear programming and heuristic back-tracking. Results are presented for a practical test system developed with the cooperation of National Grid, and it is found that GCP produces solutions that are cheaper than solutions found by SCORPION and perform extremely well: an improvement in voltage profiles, a decrease in complex power mismatches, and a reduction in MVolt Amps-reactive (VAr) utilisation were observed.

  10. Study of thick, nuclear-compensated silicon detectors; Etude des detecteurs epais au silicium compense nucleairement

    Energy Technology Data Exchange (ETDEWEB)

    Le Coroller, Y. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-09-01

    A study is made here, from the point of view of the realization and the performance, of thick nuclear-compensated silicon detectors. After recalling the need for compensation and reviewing the existing methods, the author describes in detail the controlled realization of thick detectors by nuclear compensation from the theoretical and experimental points of view. The practical precautions which should be observed are given: control of the homogeneity of the starting material, control of the evolution of the compensation, elimination of parasitic processes. The performances of the detectors obtained are then studied: electrical characteristics (current, life-time) on the one hand, detection and spectrometry of penetrating radiations on the other hand. The results show, that the compensated diodes having an effective thickness of two millimeters operate satisfactorily as detectors for applied voltages of about 500 volts. The resolutions observed are then about 2 per cent for mono-energetic electrons and about 4 per cent for the gamma; they can be improved by the use of a pre-amplifier of very low background noise. (author) [French] Les detecteurs epais au silicium compense nucleairement sont etudies ici du double point de vue realisation et performances. Apres un rappel sur la necessite de la compensation et les procedes existants, la realisation controlee des detecteurs epais par compensation nucleaire est decrite en detail sous l'aspect theorique et l'aspect experimental. On met en evidence les precautions a prendre dans la pratique: controle de l'homogeneite du materiau de base, controle de l'evolution de la compensation, elimination des processus parasites. On etudie ensuite les performances de detecteurs obtenus : caracteristiques electriques (courant, duree de vie) d'une part, d'autre part detection et spectrometrie des rayonnements penetrants. Les resultats montrent que les diodes compensees ayant une epaisseur utile de deux

  11. Compostability of bioplastic packaging materials: an overview.

    Science.gov (United States)

    Kale, Gaurav; Kijchavengkul, Thitisilp; Auras, Rafael; Rubino, Maria; Selke, Susan E; Singh, Sher Paul

    2007-03-08

    Packaging waste accounted for 78.81 million tons or 31.6% of the total municipal solid waste (MSW) in 2003 in the USA, 56.3 million tons or 25% of the MSW in 2005 in Europe, and 3.3 million tons or 10% of the MSW in 2004 in Australia. Currently, in the USA the dominant method of packaging waste disposal is landfill, followed by recycling, incineration, and composting. Since landfill occupies valuable space and results in the generation of greenhouse gases and contaminants, recovery methods such as reuse, recycling and/or composting are encouraged as a way of reducing packaging waste disposal. Most of the common materials used in packaging (i.e., steel, aluminum, glass, paper, paperboard, plastics, and wood) can be efficiently recovered by recycling; however, if packaging materials are soiled with foods or other biological substances, physical recycling of these materials may be impractical. Therefore, composting some of these packaging materials is a promising way to reduce MSW. As biopolymers are developed and increasingly used in applications such as food, pharmaceutical, and consumer goods packaging, composting could become one of the prevailing methods for disposal of packaging waste provided that industry, governments, and consumers encourage and embrace this alternative. The main objective of this article is to provide an overview of the current situation of packaging compostability, to describe the main mechanisms that make a biopolymer compostable, to delineate the main methods to compost these biomaterials, and to explain the main standards for assessing compostability, and the current status of biopolymer labeling. Biopolymers such as polylactide and poly(hydroxybutyrate) are increasingly becoming available for use in food, medical, and consumer goods packaging applications. The main claims of these new biomaterials are that they are obtained from renewable resources and that they can be biodegraded in biological environments such as soil and compost

  12. Executive compensation and firm performance: Evidence from Indian firms

    Directory of Open Access Journals (Sweden)

    Mehul Raithatha

    2016-09-01

    Full Text Available The study examines the relationship between executive compensation and firm performance among Indian firms. The evidence suggests that firm performance measured by accounting, as well as market-based measures, significantly affects executive compensation. We also test for the presence of persistence in executive compensation by employing the system-generalised methods of moments (GMM estimator. We find significant persistence in executive compensation among the sample firms. Further, we report the absence of pay–performance relationship among the smaller sample firms and business group affiliated firms. Thus, our findings cast doubts over the performance-based executive compensation practices of Indian business group affiliated firms.

  13. PORTABLE ACOUSTIC MONITORING PACKAGE (PAMP)

    Energy Technology Data Exchange (ETDEWEB)

    John L. Loth; Gary J. Morris; George M. Palmer; Richard Guiler; Patrick Browning

    2004-07-20

    The Portable Acoustic Monitoring Package (PAMP) has been designed to record and monitor the acoustic signal in natural gas transmission lines. In particular the three acoustic signals associated with a line leak. The system is portable ({approx}30 lbs) and is designed for line pressures up to 1000 psi. It has become apparent that cataloging of the various background acoustic signals in natural gas transmission line is very important if a system to identify leak signals is to be developed. The low-pressure (0-200 psig) laboratory test phase has been completed and a number of field trials have been conducted. Before the cataloging phase could begin, a few problems identified in field trials identified had to be corrected such as: (1) Decreased microphone sensitivity at line pressures above 250 psig. (2) The inability to deal with large data sets collected when cataloging the variety of signals in a transmission line. (3) The lack of an available online acoustic calibration system. These problems have been solved and the WVU PAMP is now fully functional over the entire pressure range found in the Natural Gas transmission lines in this region. Field portability and reliability have been greatly improved. Data collection and storage have also improved to the point were the full acoustic spectrum of acoustic signals can be accurately cataloged, recorded and described.

  14. The Fireball integrated code package

    Energy Technology Data Exchange (ETDEWEB)

    Dobranich, D.; Powers, D.A.; Harper, F.T.

    1997-07-01

    Many deep-space satellites contain a plutonium heat source. An explosion, during launch, of a rocket carrying such a satellite offers the potential for the release of some of the plutonium. The fireball following such an explosion exposes any released plutonium to a high-temperature chemically-reactive environment. Vaporization, condensation, and agglomeration processes can alter the distribution of plutonium-bearing particles. The Fireball code package simulates the integrated response of the physical and chemical processes occurring in a fireball and the effect these processes have on the plutonium-bearing particle distribution. This integrated treatment of multiple phenomena represents a significant improvement in the state of the art for fireball simulations. Preliminary simulations of launch-second scenarios indicate: (1) most plutonium vaporization occurs within the first second of the fireball; (2) large non-aerosol-sized particles contribute very little to plutonium vapor production; (3) vaporization and both homogeneous and heterogeneous condensation occur simultaneously; (4) homogeneous condensation transports plutonium down to the smallest-particle sizes; (5) heterogeneous condensation precludes homogeneous condensation if sufficient condensation sites are available; and (6) agglomeration produces larger-sized particles but slows rapidly as the fireball grows.

  15. Extreme temperature packaging: challenges and opportunities

    Science.gov (United States)

    Johnson, R. Wayne

    2016-05-01

    Consumer electronics account for the majority of electronics manufactured today. Given the temperature limits of humans, consumer electronics are typically rated for operation from -40°C to +85°C. Military applications extend the range to -65°C to +125°C while underhood automotive electronics may see +150°C. With the proliferation of the Internet of Things (IoT), the goal of instrumenting (sensing, computation, transmission) to improve safety and performance in high temperature environments such as geothermal wells, nuclear reactors, combustion chambers, industrial processes, etc. requires sensors, electronics and packaging compatible with these environments. Advances in wide bandgap semiconductors (SiC and GaN) allow the fabrication of high temperature compatible sensors and electronics. Integration and packaging of these devices is required for implementation into actual applications. The basic elements of packaging are die attach, electrical interconnection and the package or housing. Consumer electronics typically use conductive adhesives or low melting point solders for die attach, wire bonds or low melting solder for electrical interconnection and epoxy for the package. These materials melt or decompose in high temperature environments. This paper examines materials and processes for high temperature packaging including liquid transient phase and sintered nanoparticle die attach, high melting point wires for wire bonding and metal and ceramic packages. The limitations of currently available solutions will also be discussed.

  16. APPLICATION OF NANOTECHNOLOGY IN FOOD PACKAGING

    Directory of Open Access Journals (Sweden)

    Renata Dobrucka

    2014-04-01

    Full Text Available Nanotechnology involves the design, production and use of structures through control of the size and shape of the materials at the nanometre scale. Also, nanomaterials have been already applied in many fields of human life. Nanocomposites have already led to several innovations with potential applications in the food packaging sector. The use of nanocomposite formulations is expected to considerably enhance the shelf-life of many types of food. This improvement can lead to lower weight packages because less material is needed to obtain the same or even better barrier properties. This, in turn, can lead to reduced package cost with less packaging waste. Antimicrobial packaging is another area with high potential for applying nanocomposite technology. Nanostructured antimicrobials have a higher surface area-to-volume ratio when compared with their higher scale counterparts. Therefore, antimicrobial nanocomposite packaging systems are supposed to be particularly efficient in their activities against microbial cells. In this review, definition of nanomaterials is presented. Besides, the paper shows examples of nanocomposities and antimicrobial nanopackaging mainly with the use of nanosilver. Moreover, nanoparticles such ZnO, TiO2, MgO and nanosensors in packaging were presented.

  17. Food packaging and shelf life: a practical guide

    National Research Council Canada - National Science Library

    Robertson, Gordon L

    2010-01-01

    .... Food Packaging and Shelf Life: A Practical Guide provides package developers with the information they need to specify just the right amount of protective packaging to maintain food quality and maximize shelf life...

  18. Flat conductor cable for electrical packaging

    Science.gov (United States)

    Angele, W.

    1972-01-01

    Flat conductor cable (FCC) is relatively new, highly promising means for electrical packaging and system integration. FCC offers numerous desirable traits (weight, volume and cost savings, flexibility, high reliability, predictable and repeatable electrical characteristics) which make it extremely attractive as a packaging medium. FCC, today, finds wide application in everything from integration of lunar equipment to the packaging of electronics in nuclear submarines. Described are cable construction and means of termination, applicable specifications and standards, and total FCC systems. A list of additional sources of data is also included for more intensive study.

  19. Void-Free Lid for Food Packaging

    Science.gov (United States)

    Watson, C. D.; Farris, W. P.

    1986-01-01

    Flexible cover eliminates air pockets in sealed container. Universal food-package lid formed from flexible plastic. Partially folded, lid unfolded by depressing center portion. Height of flat portion of lid above flange thereby reduced. Pressure of food against central oval depression pops it out, forming dome that provides finger grip for mixing contents with water or opening lid. Therefore food stays fresh, allows compact stacking of partially filled containers, and resists crushing. Originally developed for packaging dehydrated food for use in human consumption on Space Shuttle missions. Other uses include home canning and commercial food packaging.

  20. The art of packaging: An investigation into the role of color in packaging, marketing, and branding

    Directory of Open Access Journals (Sweden)

    Behzad Mohebbi

    2014-12-01

    Full Text Available The purpose of this study is to contribute to the existing research in the field of packaging and marketing and shed more light on the psychology of colors and their effect on packaging and marketing. Nowadays, packaging is proved to be one of the significant factors in the success of promoting product sale. However, there is a perceived gap with respect to the different aspects of packaging, in particular the graphics, design, and color of packaging. The current study provides a comprehensive overview of packaging. It elaborates on different aspects of packaging and summarizes the findings of the most recent research conducted to date probing into packaging from different perspectives. It also discusses the role of color, i.e., the psychology of colors, and graphics in packaging and product sale. It is argued that graphics and color play key roles in promoting product sale and designers and marketers should attach a great deal of importance to color in packaging. The implications for producers, marketers, practitioners, and researchers are discussed in detail and suggestions for future research are provided.

  1. Illumination compensation in ground based hyperspectral imaging

    Science.gov (United States)

    Wendel, Alexander; Underwood, James

    2017-07-01

    Hyperspectral imaging has emerged as an important tool for analysing vegetation data in agricultural applications. Recently, low altitude and ground based hyperspectral imaging solutions have come to the fore, providing very high resolution data for mapping and studying large areas of crops in detail. However, these platforms introduce a unique set of challenges that need to be overcome to ensure consistent, accurate and timely acquisition of data. One particular problem is dealing with changes in environmental illumination while operating with natural light under cloud cover, which can have considerable effects on spectral shape. In the past this has been commonly achieved by imaging known reference targets at the time of data acquisition, direct measurement of irradiance, or atmospheric modelling. While capturing a reference panel continuously or very frequently allows accurate compensation for illumination changes, this is often not practical with ground based platforms, and impossible in aerial applications. This paper examines the use of an autonomous unmanned ground vehicle (UGV) to gather high resolution hyperspectral imaging data of crops under natural illumination. A process of illumination compensation is performed to extract the inherent reflectance properties of the crops, despite variable illumination. This work adapts a previously developed subspace model approach to reflectance and illumination recovery. Though tested on a ground vehicle in this paper, it is applicable to low altitude unmanned aerial hyperspectral imagery also. The method uses occasional observations of reference panel training data from within the same or other datasets, which enables a practical field protocol that minimises in-field manual labour. This paper tests the new approach, comparing it against traditional methods. Several illumination compensation protocols for high volume ground based data collection are presented based on the results. The findings in this paper are

  2. [Methodology of injury compensation and Government Regulation of injury compensation in reflection in the Constitutional Court decision].

    Science.gov (United States)

    Žďárek, Roman

    2017-01-01

    After the new Civil Code had come into force, the Compensation Statute lost the efficiency. The injury compensation should not have been provided according medical report with respect to the Compensation Statute but according decency basis. So the Highest Court has accepted the Methodology of compensation. The article deals with the first reflection of the Methodology in the judicature of the Constitutional Court as well as the opinion of the Constitutional Court of the Government Statute which regulates the injury compensation in labour law. The Metodology of compensation is based on the ICF (International Classification of Functioning, Disability and Health), while the Compensation Statute was based on the etiology principe. ICF is a classification of health and health-related domains. As the functioning and disability of an individual occurs in a context, ICF also includes a list of environmental factors. ICF is the WHO framework for measuring health and disability at both individual and population levels.

  3. RECENT TRENDS IN PACKAGING SYSTEMS FOR PHARMACEUTICAL PRODUCTS

    Directory of Open Access Journals (Sweden)

    Renata Dobrucka

    2014-12-01

    Full Text Available Background:  In recent years, pharmaceutical packaging market was one of the fastest growing areas of the packaging industry. At the same time the packaging manufacturers put high demands on quality and safety. Methods: Review of innovations in packaging systems for pharmaceutical products was made including newest information of researches and achievements of recent years. Results and conclusion: Observed in recent years the development of pharmaceutical packaging market expanded due to with the huge technological advances that allow introduction of new packaging. Also, in this study presented intelligent packaging in pharmacy and innovation in child-resistance packaging.

  4. DC-Compensated Current Transformer †

    Science.gov (United States)

    Ripka, Pavel; Draxler, Karel; Styblíková, Renata

    2016-01-01

    Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component. PMID:26805830

  5. Lossless Compression of Video using Motion Compensation

    DEFF Research Database (Denmark)

    Martins, Bo; Forchhammer, Søren

    1998-01-01

    Summary form only given. We investigate lossless coding of video using predictive coding and motion compensation. The new coding methods combine state-of-the-art lossless techniques as JPEG (context based prediction and bias cancellation, Golomb coding), with high resolution motion field estimation......-predictors and intra-frame predictors as well. As proposed by Ribas-Corbera (see PhD thesis, University of Michigan, 1996), we use bi-linear interpolation in order to achieve sub-pixel precision of the motion field. Using more reference images is another way of achieving higher accuracy of the match. The motion...

  6. Green packaging from a company’s perspective: Determining factors for packaging solutions in the German fruit juice industry

    OpenAIRE

    Ramme, Iris; Heimann, Ruth

    2015-01-01

    In Germany, extensive legislation aims at getting companies to engage in eco-friendly packaging. A common packaging challenge centers on fruit juice products the packaging of which ranges from carton container, to glass or plastic bottles. This study examined the prevalence of Green Packaging in the Baden-Württemberg fruit juice industry. Expert interviews reveal that these companies make packaging decisions based on bottling volume and financial resources and not on Green Packaging concerns....

  7. OECA Annual Report 2015 Data Package

    Data.gov (United States)

    U.S. Environmental Protection Agency — This downloadable data package shows information on enforcement actions and cases from 2015. They include civil enforcement actions taken by EPA at facilities,...

  8. micromap: A Package for Linked Micromaps

    Science.gov (United States)

    The R package micromap is used to create linked micromaps, which display statistical summaries associated with areal units, or polygons. Linked micromaps provide a means to simultaneously summarize and display both statistical and geographic distributions by linking statistical ...

  9. GRIP LIGHTNING INSTRUMENT PACKAGE (LIP) V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Lightning Instrument Package (LIP) consists of 6 rotating vane type electric field sensors along with a central computer to record and monitor the instruments....

  10. Improvement in Space Food Packaging Methods Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Food Systems Laboratory's (SFSL) current Bulk Overwrap Bag (BOB) package, while simple and effective, leaves room for improvement. Currently, BOBs are...

  11. Development of polymer packaging for power cable

    Directory of Open Access Journals (Sweden)

    S. Sremac

    2014-10-01

    Full Text Available This paper discusses the issues of product design and the procedure of developing polymer packaging as one of the most important engineering tasks. For the purpose of packing power cables a polymer packaging has been designed in the form of drum. Packaging and many other consumer products are largely produced using polymeric materials due to many positive features. High Density Polyethylene is the type of polyethylene proposed for packaging purposes due to its low degree of branching and strong intermolecular forces. Transport and storage processes were automated based on the radio-frequency identification technology. The proposed system is flexible in terms of its possibility of accepting and processing different types of cables and other products.

  12. Solder Mounting Technologies for Electronic Packaging

    Energy Technology Data Exchange (ETDEWEB)

    VIANCO, PAUL T.

    1999-09-23

    Soldering provides a cost-effective means for attaching electronic packages to circuit boards using both small scale and large scale manufacturing processes. Soldering processes accommodate through-hole leaded components as well as surface mount packages, including the newer area array packages such as the Ball Grid Arrays (BGA), Chip Scale Packages (CSP), and Flip Chip Technology. The versatility of soldering is attributed to the variety of available solder alloy compositions, substrate material methodologies, and different manufacturing processes. For example, low melting temperature solders are used with temperature sensitive materials and components. On the other hand, higher melting temperature solders provide reliable interconnects for electronics used in high temperature service. Automated soldering techniques can support large-volume manufacturing processes, while providing high reliability electronic products at a reasonable cost.

  13. Waste Package Component Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.C. Mecham

    2004-07-12

    This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and use of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety

  14. HOPSPACK: Hybrid Optimization Parallel Search Package.

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Genetha Anne.; Kolda, Tamara G.; Griffin, Joshua; Taddy, Matt; Martinez-Canales, Monica L.

    2008-12-01

    In this paper, we describe the technical details of HOPSPACK (Hybrid Optimization Parallel SearchPackage), a new software platform which facilitates combining multiple optimization routines into asingle, tightly-coupled, hybrid algorithm that supports parallel function evaluations. The frameworkis designed such that existing optimization source code can be easily incorporated with minimalcode modification. By maintaining the integrity of each individual solver, the strengths and codesophistication of the original optimization package are retained and exploited.4

  15. Design and packaging: Impact to consumer decision

    Directory of Open Access Journals (Sweden)

    Petrašinović Maja

    2002-01-01

    Full Text Available In marketing theory and practice, product packaging is getting more important. Changes in the market give to packaging a multifunctional phenomenon which is more that core product protection. It represent company marketing strategy and it is competitive tool, which needs to be integrated into a marketing plan and adapt to product, brand price distribution and promotion strategy. A focus to this approach is getting to know customer behavior.

  16. MGtoolkit: A python package for implementing metagraphs

    Directory of Open Access Journals (Sweden)

    D. Ranathunga

    2017-01-01

    Full Text Available In this paper we present MGtoolkit : an open-source Python package for implementing metagraphs - a first of its kind. Metagraphs are commonly used to specify and analyse business and computer-network policies alike. MGtoolkit can help verify such policies and promotes learning and experimentation with metagraphs. The package currently provides purely textual output for visualising metagraphs and their analysis results.

  17. Biopreservation in modified atmosphere packaged vegetables

    OpenAIRE

    Bennik, M.H.J.

    1997-01-01


    Recent trends in food preservation are the use of mild preservation techniques, such as modified atmosphere (MA) packaging and refrigeration, to prolong the shelflife of foods without affecting the fresh character of the product. This has resulted in the development of a new generation of chill stored, minimally processed foods, such as vegetables that are packaged under reduced oxygen (0 2 ) and elevated carbon dioxide (C0 ...

  18. Recyclability and the selection of packaging materials

    Science.gov (United States)

    Berry, David

    1992-12-01

    Costs of solid-waste disposal, concern for environmental impact, and "green" marketing opportunities have placed more attention on recyclability of packaging materials. Recyclability is determined not only by the characteristics of materials themselves, but also by the presence or absence of collection facilities, ease of separation, technology for reprocessing, and markets for recovered materials. By these measures, packaging materials are becoming more recyclable and recyclability is growing in importance as a factor in material selection.

  19. Bioplastics and food packaging: A review

    OpenAIRE

    Nafisa Jabeen; Ishrat Majid; Gulzar Ahmad Nayik

    2015-01-01

    Food packaging as a vital part of the subject of food technology is involved with protection and preservation of all types of foods. Due to economical abundance, petrochemical plastics have been largely used as packaging material due to their desirable properties of good barrier properties towards O2, aroma compounds, tensile strength and tear strength. Meanwhile, they have many disadvantages like very low water vapour transmission rate and the major disadvantage is that they are non-biodegra...

  20. Smart packaging systems for food applications: a review.

    Science.gov (United States)

    Biji, K B; Ravishankar, C N; Mohan, C O; Srinivasa Gopal, T K

    2015-10-01

    Changes in consumer preference for safe food have led to innovations in packaging technologies. This article reviews about different smart packaging systems and their applications in food packaging, packaging research with latest innovations. Active and intelligent packing are such packaging technologies which offer to deliver safer and quality products. Active packaging refers to the incorporation of additives into the package with the aim of maintaining or extending the product quality and shelf life. The intelligent systems are those that monitor the condition of packaged food to give information regarding the quality of the packaged food during transportation and storage. These technologies are designed to the increasing demand for safer foods with better shelf life. The market for active and intelligent packaging systems is expected to have a promising future by their integration into packaging materials or systems.

  1. Development directions of packaging made from polymer materials

    Directory of Open Access Journals (Sweden)

    Jovanović Slobodan

    2011-01-01

    Full Text Available World packaging market achieves turnover of about $620 billion per year with one third of this amount being associated to packaging made from polymer materials. It is expected that this kind of packaging consumption will hold at least 3% of world packaging market share in the next five years and that it will surpass the consumption of all other materials used in the packaging production. This can be contributed to product quality, low production costs as well as significant investments made in the development of polymer materials, packaging technology and packaging. This paper presents some development directions for packaging made from polymer materials, such as: packaging in the protective atmosphere, the use of active and intelligent packaging, and the use of biopolymers and recycled polymers for packaging production that come into direct contact with the packed product.

  2. Severities of transportation accidents involving large packages

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, A.W.; Foley, J.T. Jr.; Hartman, W.F.; Larson, D.W.

    1978-05-01

    The study was undertaken to define in a quantitative nonjudgmental technical manner the abnormal environments to which a large package (total weight over 2 tons) would be subjected as the result of a transportation accident. Because of this package weight, air shipment was not considered as a normal transportation mode and was not included in the study. The abnormal transportation environments for shipment by motor carrier and train were determined and quantified. In all cases the package was assumed to be transported on an open flat-bed truck or an open flat-bed railcar. In an earlier study, SLA-74-0001, the small-package environments were investigated. A third transportation study, related to the abnormal environment involving waterways transportation, is now under way at Sandia Laboratories and should complete the description of abnormal transportation environments. Five abnormal environments were defined and investigated, i.e., fire, impact, crush, immersion, and puncture. The primary interest of the study was directed toward the type of large package used to transport radioactive materials; however, the findings are not limited to this type of package but can be applied to a much larger class of material shipping containers.

  3. Naming, labeling, and packaging of pharmaceuticals.

    Science.gov (United States)

    Kenagy, J W; Stein, G C

    2001-11-01

    The problem of medical errors associated with the naming, labeling, and packaging of pharmaceuticals is discussed. Sound-alike and look-alike drug names and packages can lead pharmacists and nurses to unintended interchanges of drugs that can result in patient injury or death. The existing medication-use system is flawed because its safety depends on human perfection. Simplicity, standardization, differentiation, lack of duplication, and unambiguous communication are human factors concepts that are relevant to the medication-use process. These principles have often been ignored in drug naming, labeling, and packaging. Instead, current methods are based on long-standing commercial considerations and bureaucratic procedures. The process for naming a marketable drug is lengthy and complex and involves submission of a new chemical entity and patent application, generic naming, brand naming, FDA review, and final approval. Drug companies seek the fastest possible approval and may believe that the incremental benefit of human factors evaluation is small. "Trade dress" is the concept that underlies labeling and packaging issues for the drug industry. Drug companies are resistant to changing trade dress and brand names. Although a variety of private-sector organizations have called for reforms in drug naming, labeling, and packaging standards have been proposed, the problem remains. Drug names, labels, and packages are not selected and designed in accordance with human factors principles. FDA standards do not require application of these principles, the drug industry has struggled with change, and private-sector initiatives have had only limited success.

  4. Time temperature indicators as devices intelligent packaging

    Directory of Open Access Journals (Sweden)

    Adriana Pavelková

    2013-01-01

    Full Text Available Food packaging is an important part of food production. Temperature is a one of crucial factor which affecting the quality and safety of food products during distribution, transport and storage. The one way of control of food quality and safety is the application of new packaging systems, which also include the intelligent or smart packaging. Intelligent packaging is a packaging system using different indicators for monitoring the conditions of production, but in particular the conditions during transport and storage. Among these indicators include the time-temperature indicators to monitor changes in temperature, which is exposed the product and to inform consumers about the potential risks associated with consumption of these products. Time temperature indicators are devices that show an irreversible change in a physical characteristic, usually color or shape, in response to temperature history. Some are designed to monitor the evolution of temperature with time along the distribution chain and others are designed to be used in the consumer packages.

  5. Antimicrobial food packaging: potential and pitfalls

    Science.gov (United States)

    Malhotra, Bhanu; Keshwani, Anu; Kharkwal, Harsha

    2015-01-01

    Nowadays food preservation, quality maintenance, and safety are major growing concerns of the food industry. It is evident that over time consumers’ demand for natural and safe food products with stringent regulations to prevent food-borne infectious diseases. Antimicrobial packaging which is thought to be a subset of active packaging and controlled release packaging is one such promising technology which effectively impregnates the antimicrobial into the food packaging film material and subsequently delivers it over the stipulated period of time to kill the pathogenic microorganisms affecting food products thereby increasing the shelf life to severe folds. This paper presents a picture of the recent research on antimicrobial agents that are aimed at enhancing and improving food quality and safety by reduction of pathogen growth and extension of shelf life, in a form of a comprehensive review. Examination of the available antimicrobial packaging technologies is also presented along with their significant impact on food safety. This article entails various antimicrobial agents for commercial applications, as well as the difference between the use of antimicrobials under laboratory scale and real time applications. Development of resistance amongst microorganisms is considered as a future implication of antimicrobials with an aim to come up with actual efficacies in extension of shelf life as well as reduction in bacterial growth through the upcoming and promising use of antimicrobials in food packaging for the forthcoming research down the line. PMID:26136740

  6. Microminiature temperature-compensated magnetoelastic strain gauge

    Science.gov (United States)

    Arms, Steven W.; Townsend, Christopher P.

    2002-07-01

    Our objective was to demonstrate a microminiature magnetoelastic strain gauge that provides both strain and temperature signals without additional sensors. Iron based magnetoelastic materials were embedded within superelastic nickel/titanium (NiTi) tubing. NiTi stress was transferred to the ferrite, causing a permeability change sensed by a tiny coil. The coil/bridge was excited (70 KHz AC), synchronously demodulated, and amplified to produce a voltage output proportional to coil/ferrite impedance. A DC voltage was also applied and separately conditioned to provide an output proportional to coil resistance; this signal was used to provide thermal compensation. Controlled strains were applied and 6 Hz cyclic outputs recorded simultaneously from the magnetoelastic strain gauge and conventional foil strain gauges. The magnetoelastic strain gauge tracked the foil gauge with minimal hysteresis and good linearity over 600 microstrain; repeatability was approximately 1.5 microstrain. The magnetoelastic strain gauge's gauge factor was computed from delta inductance/original inductance under static strain conditions. Temperatures of 25-140 deg C resulted in an uncompensated shift of 15 microstrain/deg C, and compensated shift of 1.0 microstrain/deg C. A sensitive micro-magnetoelastic strain gauge was demonstrated using the same sensor to detect stress and temperature with no moving parts, high gauge factor, and good thermal stability.

  7. Paraxial charge compensator for electron cryomicroscopy.

    Science.gov (United States)

    Berriman, John A; Rosenthal, Peter B

    2012-05-01

    We describe a multi-hole condenser aperture for the production of several electron beams in the transmission electron microscope (TEM) making it possible to simultaneously image and irradiate spatially separated regions of a specimen. When the specimen is a thin film of vitreous ice suspended over a holey carbon film, simultaneous irradiation of the adjacent carbon support with the off-axis beam compensates for some of the effects of charging in the image formed by a beam irradiating only the ice. Because the intervening region is not irradiated, charge-neutralization of frozen-hydrated specimens can occur by a through-space mechanism such as the emission of secondary electrons from a grounded carbon support film. We use paraxial charge compensation (PCC) to control the amount of charge build-up on the specimen and observe the effects of charge on images. The multi-hole aperture thus provides a tool for investigating the mechanism of charging and charge mitigation during the imaging of radiation sensitive biological specimens by cryomicroscopy. Copyright © 2012 Elsevier B.V. All rights reserved.

  8. Fixman compensating potential for general branched molecules

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Abhinandan, E-mail: Abhi.Jain@jpl.nasa.gov [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, California 91109 (United States); Kandel, Saugat; Wagner, Jeffrey; Larsen, Adrien; Vaidehi, Nagarajan, E-mail: nvaidehi@coh.org [Division of Immunology, Beckman Research Institute of the City of Hope, Duarte, California 91010 (United States)

    2013-12-28

    The technique of constraining high frequency modes of molecular motion is an effective way to increase simulation time scale and improve conformational sampling in molecular dynamics simulations. However, it has been shown that constraints on higher frequency modes such as bond lengths and bond angles stiffen the molecular model, thereby introducing systematic biases in the statistical behavior of the simulations. Fixman proposed a compensating potential to remove such biases in the thermodynamic and kinetic properties calculated from dynamics simulations. Previous implementations of the Fixman potential have been limited to only short serial chain systems. In this paper, we present a spatial operator algebra based algorithm to calculate the Fixman potential and its gradient within constrained dynamics simulations for branched topology molecules of any size. Our numerical studies on molecules of increasing complexity validate our algorithm by demonstrating recovery of the dihedral angle probability distribution function for systems that range in complexity from serial chains to protein molecules. We observe that the Fixman compensating potential recovers the free energy surface of a serial chain polymer, thus annulling the biases caused by constraining the bond lengths and bond angles. The inclusion of Fixman potential entails only a modest increase in the computational cost in these simulations. We believe that this work represents the first instance where the Fixman potential has been used for general branched systems, and establishes the viability for its use in constrained dynamics simulations of proteins and other macromolecules.

  9. 76 FR 49398 - Non-Discrimination in Compensation; Compensation Data Collection Tool

    Science.gov (United States)

    2011-08-10

    ...'' difference may understate the true effect of discrimination. In addition to the gender pay gap, scholars have... of Federal Contract Compliance Programs 41 CFR Parts 60-1 RIN 1250-AA03 Non-Discrimination in... collected data include generating insight into potential problems of compensation discrimination at the...

  10. ACTIVE PACKAGING SYSTEM FOR MEAT AND MEAT PRODUCTS

    Directory of Open Access Journals (Sweden)

    Adriana Pavelková

    2012-10-01

    Full Text Available In the recent past, food packaging was used to enable marketing of products and to provide passive protection against environmental contaminations or influences that affect the shelf life of the products. However, unlike traditional packaging, which must be totally inert, active packaging is designed to interact with the contents and/or the surrounding environment. Interest in the use of active packaging systems for meat and meat products has increased in recent years. Active packaging systems are developed with the goal of extending shelf life for foods and increasing the period of time that the food is high quality. Developments in active packaging have led to advances in many areas, including delayed oxidation and controlled respiration rate, microbial growth, and moisture migration. Active packaging technologies include some physical, chemical, or biological action which changes interactions between a package, product, and/or headspace of the package in order to get a desired outcome. Active packaging systems discussed include oxygen scavengers, carbon dioxide scavengers and emitters, moisture control agents, flavour/odour absorbers and releasers  and antimicrobial packaging technologies. Active packaging is typically found in two types of systems; sachets and pads which are placed inside of packages, and active ingredients that are incorporated directly into packaging materials.  Recognition of the benefits of active packaging technologies by the food industry, development of economically viable packaging systems and increased consumer acceptance is necessary for commercial realisation of these packaging technologies.doi:10.5219/205

  11. Sustainable packaging. Packaging for a circular economy; Duurzaam verpakken. Verpakken voor de circulaire economie

    Energy Technology Data Exchange (ETDEWEB)

    Haffmans, S. [Partners for Innovation, Amsterdam (Netherlands); Standhardt, G. [Nederlands Verpaskkingscentrum NVC, Gouda (Netherlands); Hamer, A. [Agentschap NL, Utrecht (Netherlands)

    2013-10-15

    What is Sustainable Packaging? And what is the most sustainable packaging for a product? The publication is intended for anyone who wants to take into account the environment in the design of a product and packaging. It offers concrete suggestions and inspiring examples to bring sustainable packaging into practice [Dutch] Wat is Duurzaam Verpakken? En wat is de duurzaamste verpakking voor mijn product? De publicatie is bestemd voor iedereen die rekening wil houden met het milieu bij het ontwerp van een product-verpakkingscombinatie. Ze biedt concrete aanknopingspunten en inspirerende voorbeelden om hier praktisch mee aan de slag te gaan.

  12. Capacitive Trans-Impedance Amplifier Circuit with Charge Injection Compensation

    Science.gov (United States)

    Milkov, Mihail M. (Inventor); Gulbransen, David J. (Inventor)

    2016-01-01

    A capacitive trans-impedance amplifier circuit with charge injection compensation is provided. A feedback capacitor is connected between an inverting input port and an output port of an amplifier. A MOS reset switch has source and drain terminals connected between the inverting input and output ports of the amplifier, and a gate terminal controlled by a reset signal. The reset switch is open or inactive during an integration phase, and closed or active to electrically connect the inverting input port and output port of the amplifier during a reset phase. One or more compensation capacitors are provided that are not implemented as gate oxide or MOS capacitors. Each compensation capacitor has a first port connected to a compensation signal that is a static signal or a toggling compensation signal that toggles between two compensation voltage values, and a second port connected to the inverting input port of the amplifier.

  13. Forest ecosystem services and eco-compensation mechanisms in China.

    Science.gov (United States)

    Deng, Hongbing; Zheng, Peng; Liu, Tianxing; Liu, Xin

    2011-12-01

    Forests are a major terrestrial ecosystem providing multiple ecosystem services. However, the importance of forests is frequently underestimated from an economic perspective because of the externalities and public good properties of these services. Forest eco-compensation is a transfer mechanism that serves to internalize the externalities of forest ecosystem services by compensating individuals or companies for the losses or costs resulting from the provision of these services. China's current forest eco-compensation system is centered mainly on noncommercial forest. The primary measures associated with ecosystem services are (1) a charge on destructive activities, such as indiscriminate logging, and (2) compensation for individual or local activities and investments in forest conservation. The Compensation Fund System for Forest Ecological Benefits was first listed in the Forest Law of the People's Republic of China in 1998. In 2004, the Central Government Financial Compensation Fund, an important source for the Compensation Fund for Forest Ecological Benefits, was formally established. To improve the forest eco-compensation system, it is crucial to design and establish compensation criteria for noncommercial forests. These criteria should take both theoretical and practical concerns into account, and they should be based on the quantitative valuation of ecosystem services. Although some initial headway has been made on this task, the implementation of an effective forest eco-compensation system in China still has deficiencies and still faces problems. Implementing classification-based and dynamic management for key noncommercial forests and establishing an eco-compensation mechanism with multiple funding sources in the market economy are the key measures needed to conquer these problems and improve the forest eco-compensation system and China's forestry development in sequence.

  14. Industrial Concentration and Employee Compensation: Some Evidence from Japan

    OpenAIRE

    土井, 教之

    1983-01-01

    This paper examines the effects of industrial concentration on employee compensation including fringe benefits, using data of Japanese manufacturing industry. The primary findings are; (1) concentration has a positive and significant effect on direct wages and on total compensation, but is not significantly related to fringe benefits per workers; (2) firm size has a positive and significant impact on wages, total compensation and fringe benefits, particularly so on fringe benefits; (3) unioni...

  15. Forest Ecosystem Services and Eco-Compensation Mechanisms in China

    Science.gov (United States)

    Deng, Hongbing; Zheng, Peng; Liu, Tianxing; Liu, Xin

    2011-12-01

    Forests are a major terrestrial ecosystem providing multiple ecosystem services. However, the importance of forests is frequently underestimated from an economic perspective because of the externalities and public good properties of these services. Forest eco-compensation is a transfer mechanism that serves to internalize the externalities of forest ecosystem services by compensating individuals or companies for the losses or costs resulting from the provision of these services. China's current forest eco-compensation system is centered mainly on noncommercial forest. The primary measures associated with ecosystem services are (1) a charge on destructive activities, such as indiscriminate logging, and (2) compensation for individual or local activities and investments in forest conservation. The Compensation Fund System for Forest Ecological Benefits was first listed in the Forest Law of the People's Republic of China in 1998. In 2004, the Central Government Financial Compensation Fund, an important source for the Compensation Fund for Forest Ecological Benefits, was formally established. To improve the forest eco-compensation system, it is crucial to design and establish compensation criteria for noncommercial forests. These criteria should take both theoretical and practical concerns into account, and they should be based on the quantitative valuation of ecosystem services. Although some initial headway has been made on this task, the implementation of an effective forest eco-compensation system in China still has deficiencies and still faces problems. Implementing classification-based and dynamic management for key noncommercial forests and establishing an eco-compensation mechanism with multiple funding sources in the market economy are the key measures needed to conquer these problems and improve the forest eco-compensation system and China's forestry development in sequence.

  16. Pay me Right: Reference Values and Executive Compensation

    OpenAIRE

    Gregorič, Aleksandra; Polanec, Sašo; Slapničar, Sergeja

    2008-01-01

    This paper studies the impact of external reference values on managerial compensation contracts. We consider the effect of adoption of non-binding pay nfirms on actal remuneration behavior using a unique country example. We find that introduction of pay nfirms changed the reference values for CEOs and led to adjustment of executive compensation towards new equilibrium. These pay nfirms affected pay in firms with actual compensation below and above reference values. Further we find that refere...

  17. A framework of psychological compensation in attention deficit hyperactivity disorder

    OpenAIRE

    Julia eMerkt; Tilman eReinelt; Franz ePetermann

    2015-01-01

    The term compensation is widely used in the context of attention deficit hyperactivity disorder (ADHD), yet, it is neither defined nor theory driven. Adapting a model of psychological compensation (Bäckman and Dixon, 1992) to fit ADHD research is the aim of this review: we will (1) introduce the existing theoretical framework of psychological compensation, (2) discuss its applicability to ADHD and adapt the model to fit ADHD research, and (3) set up requirements for research on psychological ...

  18. Study on Ecological Compensation System and Land Desertification Control

    OpenAIRE

    Lu, Zhixiang; Gao, Bingtao

    2009-01-01

    The problems of desertification control in China are analyzed from the perspective of ecological compensation. Firstly, there is no guarantee of ecological compensation system in desertification control. On the basis of knowing land desertification connotation, the western region is taken as an example to analyze the serious consequence brought by land desertification, besides, the connotation and importance of ecological compensation are summarized, as well as the views related to resolve th...

  19. Adaptive Beam Loading Compensation in Room Temperature Bunching Cavities

    Energy Technology Data Exchange (ETDEWEB)

    Edelen, J. P. [Fermilab; Chase, B. E. [Fermilab; Cullerton, E. [Fermilab; Varghese, P. [Fermilab

    2017-10-01

    In this paper we present the design, simulation, and proof of principle results of an optimization based adaptive feedforward algorithm for beam-loading compensation in a high impedance room temperature cavity. We begin with an overview of prior developments in beam loading compensation. Then we discuss different techniques for adaptive beam loading compensation and why the use of Newton?s Method is of interest for this application. This is followed by simulation and initial experimental results of this method.

  20. Tobacco packaging design for reducing tobacco use.

    Science.gov (United States)

    McNeill, Ann; Gravely, Shannon; Hitchman, Sara C; Bauld, Linda; Hammond, David; Hartmann-Boyce, Jamie

    2017-04-27

    Tobacco use is the largest single preventable cause of death and disease worldwide. Standardised tobacco packaging is an intervention intended to reduce the promotional appeal of packs and can be defined as packaging with a uniform colour (and in some cases shape and size) with no logos or branding, apart from health warnings and other government-mandated information, and the brand name in a prescribed uniform font, colour and size. Australia was the first country to implement standardised tobacco packaging between October and December 2012, France implemented standardised tobacco packaging on 1 January 2017 and several other countries are implementing, or intending to implement, standardised tobacco packaging. To assess the effect of standardised tobacco packaging on tobacco use uptake, cessation and reduction. We searched MEDLINE, Embase, PsycINFO and six other databases from 1980 to January 2016. We checked bibliographies and contacted study authors to identify additional peer-reviewed studies. Primary outcomes included changes in tobacco use prevalence incorporating tobacco use uptake, cessation, consumption and relapse prevention. Secondary outcomes covered intermediate outcomes that can be measured and are relevant to tobacco use uptake, cessation or reduction. We considered multiple study designs: randomised controlled trials, quasi-experimental and experimental studies, observational cross-sectional and cohort studies. The review focused on all populations and people of any age; to be included, studies had to be published in peer-reviewed journals. We examined studies that assessed the impact of changes in tobacco packaging such as colour, design, size and type of health warnings on the packs in relation to branded packaging. In experiments, the control condition was branded tobacco packaging but could include variations of standardised packaging. Screening and data extraction followed standard Cochrane methods. We used different 'Risk of bias' domains for

  1. White LED with High Package Extraction Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Yi Zheng; Matthew Stough

    2008-09-30

    The goal of this project is to develop a high efficiency phosphor converting (white) Light Emitting Diode (pcLED) 1-Watt package through an increase in package extraction efficiency. A transparent/translucent monolithic phosphor is proposed to replace the powdered phosphor to reduce the scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is proposed between blue LED die and phosphor layer to recover inward yellow emission. At the end of the project we expect to recycle approximately 50% of the unrecovered backward light in current package construction, and develop a pcLED device with 80 lm/W{sub e} using our technology improvements and commercially available chip/package source. The success of the project will benefit luminous efficacy of white LEDs by increasing package extraction efficiency. In most phosphor-converting white LEDs, the white color is obtained by combining a blue LED die (or chip) with a powdered phosphor layer. The phosphor partially absorbs the blue light from the LED die and converts it into a broad green-yellow emission. The mixture of the transmitted blue light and green-yellow light emerging gives white light. There are two major drawbacks for current pcLEDs in terms of package extraction efficiency. The first is light scattering caused by phosphor particles. When the blue photons from the chip strike the phosphor particles, some blue light will be scattered by phosphor particles. Converted yellow emission photons are also scattered. A portion of scattered light is in the backward direction toward the die. The amount of this backward light varies and depends in part on the particle size of phosphors. The other drawback is that yellow emission from phosphor powders is isotropic. Although some backward light can be recovered by the reflector in current LED packages, there is still a portion of backward light that will be absorbed inside the package and further converted to heat. Heat

  2. MOTIVATION AND COMPENSATION IN HEALTH SYSTEM

    Directory of Open Access Journals (Sweden)

    K. N. Borisov

    2014-01-01

    Full Text Available By the defi nition accepted by WHO, «health» it is not simple absence of an illness, but a condition of full physical, moral, mental and social wellbeing. By this defi nition forms of behavior and a way of life of the people, allowing prolonging the period of active, creative and happy life are meant. Health of each person – the main value for modern society. A crisis state of population as open social system, it is shown by its indignation in reply to stressful infl uences of negative socio-economic factors. It is accompanied by change of a condition of the public health which level refl ects depth of occurring changes. In the conditions of market managing also, the policy in the fi eld of compensation, material encouragement and social support of medical workers essentially changes. A certain level of compensation regardless of should be guaranteed to the medical worker, whether mechanisms of economic incentives of its work are used or not. At the same time, the desire of the worker to hold a position with higher salary and desire to work on it is productive and is qualitative – far not same. Increase of material compensation not always leads to increase of labor motivation and aspiration it is better to work. Socially psychological bases of labor motivation of medical workers are those new approaches that will allow solving problems of increase of labor motivation more eff ectively. In article the assessment of labor motivation is analyzed by medical workers, measures for increase of labor motivation and according to improvement of quality of medical care are off ered. The majority of the western experts ineffi ciency of management recognize as the main problem of health care ofRussia. The conclusion that medical institutes, academies and institutes of a post degree obrazoyovaniye, professional development faculties, and, probably, and institutes an upravleyoniya, should adapt foreign experience (motivational, conceptual, technological

  3. MOTIVATION AND COMPENSATION IN HEALTH SYSTEM

    Directory of Open Access Journals (Sweden)

    K. N. Borisov

    2015-01-01

    Full Text Available By the definition accepted by WHO, «health» it is not simple absence of an illness, but a condition of full physical, moral, mental and social wellbeing. By this definition forms of behavior and a way of life of the people, allowing prolonging the period of active, creative and happy life are meant. Health of each person – the main value for modern society. A crisis state of population as open social system, it is shown by its indignation in reply to stressful influences of negative socio-economic factors. It is accompanied by change of a condition of the public health which level refl ects depth of occurring changes. In the conditions of market managing also, the policy in the field of compensation, material encouragement and social support of medical workers essentially changes. A certain level of compensation regardless of should be guaranteed to the medical worker, whether mechanisms of economic incentives of its work are used or not. At the same time, the desire of the worker to hold a position with higher salary and desire to work on it is productive and is qualitative – far not same. Increase of material compensation not always leads to increase of labor motivation and aspiration it is better to work. Socially psychological bases of labor motivation of medical workers are those new approaches that will allow solving problems of increase of labor motivation more effectively. In article the assessment of labor motivation is analyzed by medical workers, measures for increase of labor motivation and according to improvement of quality of medical care are off ered. The majority of the western experts inefficiency of management recognize as the main problem of health care ofRussia. The conclusion that medical institutes, academies and institutes of a post degree obrazoyovaniye, professional development faculties, and, probably, and institutes an upravleyoniya, should adapt foreign experience (motivational, conceptual, technological and

  4. Adaptive slope compensation for high bandwidth digital current mode controller

    DEFF Research Database (Denmark)

    Taeed, Fazel; Nymand, Morten

    2015-01-01

    An adaptive slope compensation method for digital current mode control of dc-dc converters is proposed in this paper. The compensation slope is used for stabilizing the inner current loop in peak current mode control. In this method, the compensation slope is adapted with the variations...... in converter duty cycle. The adaptive slope compensation provides optimum controller operation in term of bandwidth over wide range of operating points. In this paper operation principle of the controller is discussed. The proposed controller is implemented in an FPGA to control a 100 W buck converter...

  5. Pesticide Registration Manual: Chapter 10 - Data Compensation Requirements

    Science.gov (United States)

    This chapter provides information about data compensation requirements, procedures, and obligations when submitting an application for registration, amended registration, reregistration or registration review.

  6. Work Activities and Compensation of Male and Female Cardiologists

    National Research Council Canada - National Science Library

    Jagsi, Reshma; Biga, Cathie; Poppas, Athena; Rodgers, George P; Walsh, Mary N; White, Patrick J; McKendry, Colleen; Sasson, Joseph; Schulte, Phillip J; Douglas, Pamela S

    2016-01-01

    .... We applied the Peters-Belson technique and multivariate regression analysis to evaluate whether gender differences in compensation existed after accounting for differences in other measured characteristics...

  7. Harmonic currents Compensator Grid-Connected Inverter at the Microgrid

    DEFF Research Database (Denmark)

    Asuhaimi Mohd Zin, A.; Naderipour, A.; Habibuddin, M.H.

    2016-01-01

    The main challenge associated with the grid-connected inverter in distributed generation (DG) systems is to maintain the harmonic contents in output current below the specified values and compensates for unbalanced loads even when the grid is subject to disturbances such as harmonic distortion...... loads are unbalanced and/or nonlinear and also compensate of the harmonic currents and control the active and reactive power. The main advantage and objective of this method is to effectively compensate for the harmonic currents content of the grid current and microgrid without using any compensation...

  8. Secondary control for voltage unbalance compensation in an islanded microgrid

    DEFF Research Database (Denmark)

    Savaghebi, Mehdi; Guerrero, Josep M.; Jalilian, Alireza

    2011-01-01

    In this paper, the concept of secondary control is applied for voltage unbalance compensation in an islanded microgrid. The aim of the proposed control approach is to enhance the voltage quality at the point of common coupling (PCC). Unbalance compensation is achieved by proper control of distrib......In this paper, the concept of secondary control is applied for voltage unbalance compensation in an islanded microgrid. The aim of the proposed control approach is to enhance the voltage quality at the point of common coupling (PCC). Unbalance compensation is achieved by proper control...

  9. Wrapping up your message : Sustainable storytelling through packaging

    NARCIS (Netherlands)

    Wever, R.; Schermer, R.; Smit, L.; Vos, L.

    2015-01-01

    Besides contributing to the actual sustainability performance of a product-packaging combination, packaging can also play a role in communicating about sustainability. Such green marketing aspects of packaging may either focus on the sustainability credentials of the packaging itself, or on the

  10. 30 CFR 7.108 - Power package checklist.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Power package checklist. 7.108 Section 7.108... checklist. Each diesel power package bearing an MSHA approval plate shall be accompanied by a power package checklist. The power package checklist shall consist of a list of specific features that must be checked and...

  11. 49 CFR 173.465 - Type A packaging tests.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Type A packaging tests. 173.465 Section 173.465... SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.465 Type A packaging tests. (a) The packaging... deformation upon impact by the specimen would not significantly increase the damage to the specimen. (d...

  12. 19 CFR 10.461 - Retail packaging materials and containers.

    Science.gov (United States)

    2010-04-01

    ... Free Trade Agreement Rules of Origin § 10.461 Retail packaging materials and containers. Packaging materials and containers in which a good is packaged for retail sale, if classified with the good for which... 19 Customs Duties 1 2010-04-01 2010-04-01 false Retail packaging materials and containers. 10.461...

  13. 19 CFR 10.539 - Retail packaging materials and containers.

    Science.gov (United States)

    2010-04-01

    ...-Singapore Free Trade Agreement Rules of Origin § 10.539 Retail packaging materials and containers. Packaging materials and containers in which a good is packaged for retail sale, if classified with the good for which... 19 Customs Duties 1 2010-04-01 2010-04-01 false Retail packaging materials and containers. 10.539...

  14. COMPENSATION OF OUTPUT SIGNAL TEMPERATURE DEPENDENCE IN HOMODYNE DEMODULATION TECHNIQUE FOR PHASE FIBER-OPTIC SENSORS

    Directory of Open Access Journals (Sweden)

    M. V. Mekhrengin

    2015-03-01

    Full Text Available Modified phase-generated carrier homodyne demodulation technique for fiber-optic sensors is presented. Nowadays phase-generated carrier homodyne demodulation technique is one of the most widespread. One of its drawbacks is the temperature dependence of the output signal because of the modulator scale factor temperature dependence. In order to compensate this dependence an automatic adjustment of the phase modulation depth is necessary. To achieve the result, additional harmonics analysis is used with the help of the Bessel functions. For this purpose the known demodulation scheme is added with the branch, where interferometric signal is multiplied by the third harmonic of the modulation signal. The deviation of optimal ratio of odd harmonics is used as a feedback signal for adjusting the modulation depth. Unwanted emissions arise in the feedback signal, when the third harmonic possesses a value close to zero. To eliminate unwanted emission in the feedback signal, the principle scheme is added with one more branch, where interferometric signal is multiplied by the forth harmonic of the modulation signal. The deviation of optimal ratio of even harmonics is used as a feedback signal alternately with the deviation of optimal ratio of odd harmonics. A mathematical model of the algorithm is designed using the MATLAB package. Results of modeling have confirmed that suggested method gives the possibility for an automatic adjustment of the phase modulation depth and makes it possible to compensate temperature dependence for the modulator scale factor and output signal magnitude.

  15. Automatic relative RPC image model bias compensation through hierarchical image matching for improving DEM quality

    Science.gov (United States)

    Noh, Myoung-Jong; Howat, Ian M.

    2018-02-01

    The quality and efficiency of automated Digital Elevation Model (DEM) extraction from stereoscopic satellite imagery is critically dependent on the accuracy of the sensor model used for co-locating pixels between stereo-pair images. In the absence of ground control or manual tie point selection, errors in the sensor models must be compensated with increased matching search-spaces, increasing both the computation time and the likelihood of spurious matches. Here we present an algorithm for automatically determining and compensating the relative bias in Rational Polynomial Coefficients (RPCs) between stereo-pairs utilizing hierarchical, sub-pixel image matching in object space. We demonstrate the algorithm using a suite of image stereo-pairs from multiple satellites over a range stereo-photogrammetrically challenging polar terrains. Besides providing a validation of the effectiveness of the algorithm for improving DEM quality, experiments with prescribed sensor model errors yield insight into the dependence of DEM characteristics and quality on relative sensor model bias. This algorithm is included in the Surface Extraction through TIN-based Search-space Minimization (SETSM) DEM extraction software package, which is the primary software used for the U.S. National Science Foundation ArcticDEM and Reference Elevation Model of Antarctica (REMA) products.

  16. Successful Beam-Beam Tuneshift Compensation

    Energy Technology Data Exchange (ETDEWEB)

    Bishofberger, Kip Aaron [Univ. of California, Los Angeles, CA (United States)

    2005-01-01

    The performance of synchrotron colliders has been limited by the beam-beam limit, a maximum tuneshift that colliding bunches could sustain. Due to bunch-to-bunch tune variation and intra-bunch tune spread, larger tuneshifts produce severe emittance growth. Breaking through this constraint has been viewed as impossible for several decades. This dissertation introduces the physics of ultra-relativistic synchrotrons and low-energy electron beams, with emphasis placed on the limits of the Tevatron and the needs of a tuneshift-compensation device. A detailed analysis of the Tevatron Electron Lens (TEL) is given, comparing theoretical models to experimental data whenever possible. Finally, results of Tevatron operations with inclusion of the TEL are presented and analyzed. It is shown that the TEL provides a way to shatter the previously inescapable beam-beam limit.

  17. Superconductivity in compensated and uncompensated semiconductors

    Directory of Open Access Journals (Sweden)

    Youichi Yanase and Naoyuki Yorozu

    2008-01-01

    Full Text Available We investigate the localization and superconductivity in heavily doped semiconductors. The crossover from the superconductivity in the host band to that in the impurity band is described on the basis of the disordered three-dimensional attractive Hubbard model for binary alloys. The microscopic inhomogeneity and the thermal superconducting fluctuation are taken into account using the self-consistent 1-loop order theory. The superconductor-insulator transition accompanies the crossover from the host band to the impurity band. We point out an enhancement of the critical temperature Tc around the crossover. Further localization of electron wave functions leads to the localization of Cooper pairs and induces the pseudogap. We find that both the doping compensation by additional donors and the carrier increase by additional acceptors suppress the superconductivity. A theoretical interpretation is proposed for the superconductivity in the boron-doped diamond, SiC, and Si.

  18. Compensating need satisfaction across life boundaries

    DEFF Research Database (Denmark)

    Hewett, Rebecca; Haun, Verena; Demerouti, Evangelia

    2017-01-01

    a boundary condition for the beneficial effects of need satisfaction. Practitioner points * The study examines the interplay between daily need satisfaction at work and at home and its relation to employee well-being at bedtime. * Employees particularly benefit from competence need satisfaction at home (e......Self-determination theory suggests that satisfaction of an individual's basic psychological needs (for competence, autonomy, and relatedness) is a key for well-being. This has gained empirical support in multiple life domains, but little is known about the way that need satisfaction interacts...... between work and home. Drawing from ideas of work–home compensation, we expect that the benefits of need satisfaction in the home domain are reduced when needs are satisfied in the work domain. We tested this hypothesis with a daily diary study involving 91 workers. Results showed that individuals...

  19. A dual estimate method for aeromagnetic compensation

    Science.gov (United States)

    Ma, Ming; Zhou, Zhijian; Cheng, Defu

    2017-11-01

    Scalar aeromagnetic surveys have played a vital role in prospecting. However, before analysis of the surveys’ aeromagnetic data is possible, the aircraft’s magnetic interference should be removed. The extensively adopted linear model for aeromagnetic compensation is computationally efficient but faces an underfitting problem. On the other hand, the neural model proposed by Williams is more powerful at fitting but always suffers from an overfitting problem. This paper starts off with an analysis of these two models and then proposes a dual estimate method to combine them together to improve accuracy. This method is based on an unscented Kalman filter, but a gradient descent method is implemented over the iteration so that the parameters of the linear model are adjustable during flight. The noise caused by the neural model’s overfitting problem is suppressed by introducing an observation noise.

  20. Disclosed Values of Option-Based Compensation

    DEFF Research Database (Denmark)

    Bechmann, Ken L.; Hjortshøj, Toke Lilhauge

    New accounting standards require firms to expense the costs of option-based compensation (OBC), but the associated valuations offer many challenges for firms. Earlier research has documented that firms in the U.S. generally underreport the values of OBC by manipulating the inputs used for valuation...... purposes. This paper examines the values of OBC disclosed by Danish firms. The results suggest that firms experience some diffculties in valuing OBC, but interestingly, there is no clear evidence of deliberate underreporting. For example, there is no evidence that firms use manipulated values for the Black...... of attention paid to these values in Denmark. However, the differences can also be due to the fact that several Danish firms do not provide the information required regarding their OBC, which is clearly a very effective way of hiding the true values....

  1. NUCLEATION AND ENTROPY COMPENSATION IN BIOLOGICAL ASSEMBLY

    Directory of Open Access Journals (Sweden)

    Frank A. Ferrone

    2012-12-01

    Full Text Available The assembly of molecules from solution into larger aggregates de-activates their independent rotational and translational motion, which would represent an insuperable penalty in free energy without a compensatory mechanism for regaining at least some of the lost entropy. Such compensation is provided by the internal rigidbody motion of molecules in protein aggregates such as polymers and crystals. While the concepts behind the contributions of these entropic elements, known as vibrational entropy, are not new, the magnitude of the effects is little appreciated. Based on extensive experiments on sickle cell hemoglobin polymerization, we present examples showing the magnitude of the effects and the role they play in explaining such things as the rapid assembly of fibers compared with crystals. While the example will be drawn from sickle hemoglobin, the principles and applications of the concepts are quite general.

  2. Fish-mediated trait compensation in zooplankton

    DEFF Research Database (Denmark)

    Hylander, Samuel; Souza, M.S.; Balseiro, E.

    2012-01-01

    predation and UVR defences. 3. Zooplankton exposed to fish predator cues (no direct predation) reduced their pigmentation by c. 30% in 20 days. However, they were able to rapidly counteract negative UVR effects by increasing the activity of antioxidant defences such as glutathione S-transferase (GST). When...... pigmentation and antioxidant enzymes are flexible UVR defence systems, which can be induced when needed. Zooplankton may employ antioxidant defences when pigmentation is reduced to counteract predation risk and thereby rapidly respond to detrimental effects of UVR exposure, that is, they can compensate one......1. Environmental factors fluctuate spatially and temporally, and organisms that can alter phenotype in response to these changes may increase their fitness. Zooplankton are known to be able to induce body pigmentation in response to ultraviolet radiation (UVR) and to reduce the pigmentation when...

  3. Motion compensation for structured light sensors

    Science.gov (United States)

    Biswas, Debjani; Mertz, Christoph

    2015-05-01

    In order for structured light methods to work outside, the strong background from the sun needs to be suppressed. This can be done with bandpass filters, fast shutters, and background subtraction. In general this last method necessitates the sensor system to be stationary during data taking. The contribution of this paper is a method to compensate for the motion if the system is moving. The key idea is to use video stabilization techniques that work even if the illuminator is switched on and off from one frame to another. We used OpenCV functions and modules to implement a robust and efficient method. We evaluated it under various conditions and tested it on a moving robot outdoors. We will demonstrate that one can not only do 3D reconstruction under strong ambient light, but that it is also possible to observe optical properties of the objects in the environment.

  4. Managing federal workers' compensation injuries and costs.

    Science.gov (United States)

    Mallon, Timothy M; Grizzell, Tifani; Holland, Leslie; Hodgson, Michael

    2015-03-01

    Federal Employees' Compensation Act injury rates and claim costs benefit from injury prevention and case management efforts. The Department of Labor Protecting Our Workers and Ensuring Reemployment data on lost time injuries and illnesses do support injury prevention and case management activities. The management efforts of the Department of Defense, Veterans Administration, and Department of Labor were examined to determine whether more is needed to support injury prevention and case management efforts. Data on Protecting Our Workers and Ensuring Reemployment goal 3 metrics should be provided to safety and occupational health (SOH) personnel to support injury prevention and case management efforts. Injury prevention and case management data need to be made available to SOH team members to prevent injuries and lower claims costs. Actionable information must be provided to SOH that will facilitate case management and injury prevention programs and lower costs.

  5. Free surface flows under compensated gravity conditions

    CERN Document Server

    Dreyer, Miachel E

    2007-01-01

    This book considers the behavior of fluids in a low-gravity environment with special emphasis on application in PMD (propellant management device) systems . In the compensated gravity environment of a spacecraft, the hydrostatic pressure decreases to very low values depending on the residual acceleration, and surface tension forces become dominant. Consequently, surface tension can be used to transport and position liquids if the residual acceleration and the resulting hydrostatic pressure are small compared to the capillary pressure. One prominent application is the use of PMDs in surface-tension satellite tanks. PMDs must ensure that the tank outlet is covered with liquid whenever outflow is demanded. Furthermore, PMDs are used to ensure expulsion and refilling of tanks for liquids and gases for life support, reactants, and experiment supplies. Since most of the PMD designs are not testable on ground and thus rely on analytical or numerical concepts, this book treats three different flow problems with analy...

  6. Surgical compensation of presbyopia with corneal inlays.

    Science.gov (United States)

    Konstantopoulos, Aris; Mehta, Jodhbir S

    2015-05-01

    Presbyopia, the physiological change in near vision that develops with ageing, gradually affects individuals older than 40 years and is a growing cause of visual disability due to ageing demographics of the global population. The routine use of computers and 'smartphones', combined with the affluence of the 'baby boomers' generation has set high standards for near vision correction. Corneal inlays are a relatively new treatment modality that is effective at compensating for presbyopia. The dimensions of these devices vary from 2 to 3.8 mm in diameter and 5 to 32 μm in thickness. They are implanted in the anterior corneal stroma of the non-dominant eye, most commonly, in a femtosecond laser created corneal pocket. They improve near vision by increasing the depth of focus, creating a hyper-prolate region of increased central cornea power or providing a refractive add power. This article reviews the literature on the efficacy and safety of corneal inlays.

  7. Closing-in Behavior: Compensation or Attraction?

    Science.gov (United States)

    Ambron, Elisabetta; Beschin, Nicoletta; Cerrone, Chiara; Della Sala, Sergio

    2017-10-19

    Closing-in behavior (CIB) defines the abnormal misplacement of the copy performance, positioned very closed to or on the top of the model. This symptom is observed in graphic copying by patients suffering from different neurological diseases, most commonly dementia. The cognitive origins of this behavior are still a matter of investigation, and research of the last 10 years has been focused on exploring 2 main accounts of CIB, the compensation and the attraction hypotheses, providing evidence in both directions. While the first account defines CIB as a compensatory strategy to overcome visuospatial and/or working memory deficits during copying tasks, the attraction hypothesis looks at CIB as primitive default behavior in which attention and action are closely coupled and movements are performed toward the focus of attention. We explored these 2 hypotheses in a sample of patients with and without CIB, and controls in 5 experiments: Experiments 1 and 2 tested the attraction hypothesis and, respectively, the prediction that CIB can be elicited in a noncopying dual task condition loading upon attentional resources or by irrelevant attentional grabbing stimuli. The other experiments investigated the compensation hypothesis manipulating the distance between model and copying space (Experiment 3), the task demand (single or dual task loading on verbal working memory; Experiment 4), the task requirements (copying and tracing) and visual demand (visual copy and memory; Experiment 5). The results support the attraction hypothesis of CIB. CIB reflects an impairment of the attention and action system, rather than a compensatory strategy. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  8. Modeling and motion compensation of a bidirectional tendon-sheath actuated system for robotic endoscopic surgery.

    Science.gov (United States)

    Sun, Zhenglong; Wang, Zheng; Phee, Soo Jay

    2015-04-01

    Recent study shows that tendon-sheath system (TSS) has great potential in the development of surgical robots for endoscopic surgery. It is able to deliver adequate power in a light-weight and compact package. And the flexibility and compliance of the tendon-sheath system make it capable of adapting to the long and winding path in the flexible endoscope. However, the main difficulties in precise control of such system fall on the nonlinearities of the system behavior and absence of necessary sensory feedback at the surgical end-effectors. Since accurate position control of the tool is a prerequisite for efficacy, safety and intuitive user-experience in robotic surgery, in this paper we propose a system modeling approach for motion compensation. Based on a bidirectional actuated system using two separate tendon-sheaths, motion transmission is firstly characterized. Two types of positional errors due to system backlash and environment loading are defined and modeled. Then a model-based feedforward compensation method is proposed for open-loop control, giving the system abilities to adjust according to changes in the transmission route configuration without any information feedback from the distal end. A dedicated experimental platform emulating a bidirectional TSS robotic system for endoscopic surgery is built for testing. Proposed positional errors are identified and verified. The performance of the proposed motion compensation is evaluated by trajectory tracking under different environment loading conditions. And the results demonstrate that accurate position control can be achieved even if the transmission route configuration is updated. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  9. Certification of packagings: compliance with DOT specification 7A packaging requirements

    Energy Technology Data Exchange (ETDEWEB)

    Edling, D.A.

    1976-10-08

    A study was conducted to determine which of the packagings currently listed in CFR 49 Section 173.395 a.1-5, meet the Specification 7A requirements (CFR 49 Section 173.350). According to DOT HM-111 the present listing of various authorized DOT specifications in Section 173.394 and Section 173.395 (Type A containers) of ICC Tariff No. 27 would be deleted with complete reliance being placed on the use of DOT 7A, Type A general packaging specification. Each user of a Specification 7A package would be required to document and maintain on file for one year a written record of his determination of compliance with the DOT Specification 7A performance requirements. All the specification packagings listed in CFR 49 Section 173.395a.1-5 were tested and shown to meet the Specification 7A criteria; however, in many cases qualifications were placed on their use. Forty-nine specification packagings were tested and shown to meet the DOT Specification 7A performance requirements and since there were several styles of some specific packagings, this amounts to greater than 80 packagings. The extensive testing generally indicated a high degree of containment integrity in the packagings tested and the documentation discussed is a valuable tool for shippers of Type A quantities of radioactive materials. (DLC)

  10. Inkjet printing of UHF antennas on corrugated cardboards for packaging applications

    Energy Technology Data Exchange (ETDEWEB)

    Sowade, Enrico, E-mail: enrico.sowade@mb.tu-chemnitz.de [Digital Printing and Imaging Technology, Technische Universität Chemnitz, Chemnitz (Germany); Göthel, Frank [Digital Printing and Imaging Technology, Technische Universität Chemnitz, Chemnitz (Germany); Zichner, Ralf [Department Printed Functionalities, Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz (Germany); Baumann, Reinhard R. [Digital Printing and Imaging Technology, Technische Universität Chemnitz, Chemnitz (Germany); Department Printed Functionalities, Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz (Germany)

    2015-03-30

    Highlights: • Inkjet printing of UHF antennas on cardboard substrates. • Development of primer layer to compensate the absorptiveness of the cardboard and the rough surface. • Manufacturing of UHF antennas in a fully digital manner for packaging applications. - Abstract: In this study, a method based on inkjet printing has been established to develop UHF antennas on a corrugated cardboard for packaging applications. The use of such a standardized, paper-based packaging substrate as material for printing electronics is challenging in terms of its high surface roughness and high ink absorption rate, especially when depositing very thin films with inkjet printing technology. However, we could obtain well-defined silver layers on the cardboard substrates due to a primer layer approach. The primer layer is based on a UV-curable ink formulation and deposited as well as the silver ink with inkjet printing technology. Industrial relevant printheads were chosen for the deposition of the materials. The usage of inkjet printing allows highest flexibility in terms of pattern design. The primer layer was proven to optimize the surface characteristics of the substrate, mainly reducing the surface roughness and water absorptiveness. Thanks to the primer layer approach, ultra-high-frequency (UHF) radio-frequency identification (RFID) antennas were deposited by inkjet printing on the corrugated cardboards. Along with the characterization and interpretation of electrical properties of the established conductive antenna patterns, the performance of the printed antennas were analyzed in detail by measuring the scattering parameter S{sub 11} and the antenna gain.

  11. SUSTAINABLE PACKAGING SOLUTIONS FOR ORGANIC FRESH BERRIES

    Directory of Open Access Journals (Sweden)

    Elisabeta Elena TĂNASE

    2017-12-01

    Full Text Available Climate changes and particularly global warming are topics carefully treated by specialists already since decades. The most pregnant factor that influences climate change is pollution, namely the high level carbon dioxide emissions. Besides other substances used by the most of the industries (oil, charcoal, fertilizers, etc., plastics are not to be ignored when talking about pollution. Plastic waste affects animals and humans, as well as their habitat. In this respect, food industry engages in preserving the good functioning of the environment by developing and using biodegradable and bio-based resources for food packaging. The aim of this literature review was to identify the optimal sustainable packaging solution used for berries. The results of the study pointed out that the most used environmentally friendly packaging technique is the one that involves modified atmosphere. In terms of packaging materials, the literature is limited when it comes to biodegradable/bio-based solutions. However, active packaging gains popularity among researchers, considering the endless possibilities to include sustainable compounds in a biopolymer based matrix, in order to prolong the shelf-life of berries or fruits in general.

  12. Antimicrobial nanomaterials for food packaging applications

    Directory of Open Access Journals (Sweden)

    Radusin Tanja I.

    2016-01-01

    Full Text Available Food packaging industry presents one of the fastest growing industries nowadays. New trends in this industry, which include reducing food as well as packaging waste, improved preservation of food and prolonged shelf-life together with substitution of petrochemical sources with renewable ones are leading to development of this industrial area in diverse directions. This multidisciplinary challenge is set up both in front of food and material scientists. Nanotechnology is recently answering to these challenges, with different solutions-from improvements in materials properties to active packaging solutions, or both at the same time. Incorporation of nanoparticles into polymer matrix and preparation of hybrid materials is one of the methods of modification of polymer properties. Nano scaled materials with antimicrobial properties can act as active components when added into polymer, thereby leading to prolonged protective function of pristine food packaging material. This paper presents a review in the field of antimicrobial nanomaterials for food packaging in turn of technology, application and regulatory issues.

  13. Advances in Packaging Methods, Processes and Systems

    Directory of Open Access Journals (Sweden)

    Nitaigour Premchand Mahalik

    2014-10-01

    Full Text Available The food processing and packaging industry is becoming a multi-trillion dollar global business. The reason is that the recent increase in incomes in traditionally less economically developed countries has led to a rise in standards of living that includes a significantly higher consumption of packaged foods. As a result, food safety guidelines have been more stringent than ever. At the same time, the number of research and educational institutions—that is, the number of potential researchers and stakeholders—has increased in the recent past. This paper reviews recent developments in food processing and packaging (FPP, keeping in view the aforementioned advancements and bearing in mind that FPP is an interdisciplinary area in that materials, safety, systems, regulation, and supply chains play vital roles. In particular, the review covers processing and packaging principles, standards, interfaces, techniques, methods, and state-of-the-art technologies that are currently in use or in development. Recent advances such as smart packaging, non-destructive inspection methods, printing techniques, application of robotics and machineries, automation architecture, software systems and interfaces are reviewed.

  14. RNA Encapsidation and Packaging in the Phleboviruses

    Directory of Open Access Journals (Sweden)

    Katherine E. Hornak

    2016-07-01

    Full Text Available The Bunyaviridae represents the largest family of segmented RNA viruses, which infect a staggering diversity of plants, animals, and insects. Within the family Bunyaviridae, the Phlebovirus genus includes several important human and animal pathogens, including Rift Valley fever virus (RVFV, severe fever with thrombocytopenia syndrome virus (SFTSV, Uukuniemi virus (UUKV, and the sandfly fever viruses. The phleboviruses have small tripartite RNA genomes that encode a repertoire of 5–7 proteins. These few proteins accomplish the daunting task of recognizing and specifically packaging a tri-segment complement of viral genomic RNA in the midst of an abundance of host components. The critical nucleation events that eventually lead to virion production begin early on in the host cytoplasm as the first strands of nascent viral RNA (vRNA are synthesized. The interaction between the vRNA and the viral nucleocapsid (N protein effectively protects and masks the RNA from the host, and also forms the ribonucleoprotein (RNP architecture that mediates downstream interactions and drives virion formation. Although the mechanism by which all three genomic counterparts are selectively co-packaged is not completely understood, we are beginning to understand the hierarchy of interactions that begins with N-RNA packaging and culminates in RNP packaging into new virus particles. In this review we focus on recent progress that highlights the molecular basis of RNA genome packaging in the phleboviruses.

  15. Packaging wastes management; Gestion integral de los residuos de envases

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Ramos, M.

    1996-12-01

    Packaging, having fulfilled their function, become waste and joint the flow of resure we generate every day. Packaging waste is a usable secondary raw material, provided that a suitable integrated management strategy is devised. This article highlights the Integrated Management Strategic Plan for Packaging Waste, following the priority guidelines established by the Community Directives on waste management: Reduction, re-use, Recycling, Energy Recovery and Final Elimination, and the European Directive 94/62/CE about packaging and packaging waste. (Author)

  16. Packaged low-level waste verification system

    Energy Technology Data Exchange (ETDEWEB)

    Tuite, K.; Winberg, M.R.; McIsaac, C.V. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1995-12-31

    The Department of Energy through the National Low-Level Waste Management Program and WMG Inc. have entered into a joint development effort to design, build, and demonstrate the Packaged Low-Level Waste Verification System. Currently, states and low-level radioactive waste disposal site operators have no method to independently verify the radionuclide content of packaged low-level waste that arrives at disposal sites for disposition. At this time, the disposal site relies on the low-level waste generator shipping manifests and accompanying records to ensure that low-level waste received meets the site`s waste acceptance criteria. The subject invention provides the equipment, software, and methods to enable the independent verification of low-level waste shipping records to ensure that the site`s waste acceptance criteria are being met. The objective of the prototype system is to demonstrate a mobile system capable of independently verifying the content of packaged low-level waste.

  17. Examination of shipping package 9975-04985

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-08-01

    Package 9975-04985 was examined following the identification of several unexpected conditions during surveillance activities. A heavy layer of corrosion product on the shield and the shield outer diameter being larger that allowed by drawing tolerances contributed to a very tight fit between the upper fiberboard assembly and shield. The average corrosion rate for the shield is estimated to be 0.0018 inch/year or less, which falls within the bounding rate of 0.002 inch/year that has been previously recommended for these packages. Several apparent foreign objects were noted within the package. One object observed on the air shield was identified as tape. The other objects were comprised of mostly fine fibers from the cane fiberboard. It is postulated that the upper and lower fiberboard assemblies were able to rub against each other due to the upper fiberboard assembly being held tight to the shield, and a few stray cane chips became frayed under vibratory motions.

  18. NANOTECHNOLOGY IN FOOD PACKAGING - A CRITICAL REVIEW

    Directory of Open Access Journals (Sweden)

    Sumit Goyal

    2012-10-01

    Full Text Available Nanotechnology has an extremely high potential to benefit society through applications in food packaging. It can make the products cheaper and the production more efficient by producing less waste and using less energy. However, any new technology carries an ethical responsibility for wise application and the recognition that there are potential unforeseen risks that may come with the tremendous positive potential. The concept of nanocomposites represents a stimulating route for creating new and innovative materials, also in the area of natural polymers. The use of protective coatings and suitable packaging by the food industry has become a topic of great interest because of their potentiality for increasing the shelf life of many food products. Research and development of bio-nanocomposite materials for food applications such as packaging and other food contact surfaces is expected to grow in the next decade with the advent of new polymeric materials and composites with inorganic nano-particles.

  19. MEMS Packaging - Current Issues and Approaches

    Energy Technology Data Exchange (ETDEWEB)

    DRESSENDORFER,PAUL V.; PETERSON,DAVID W.; REBER,CATHLEEN ANN

    2000-01-19

    The assembly and packaging of MEMS (Microelectromechanical Systems) devices raise a number of issues over and above those normally associated with the assembly of standard microelectronic circuits. MEMS components include a variety of sensors, microengines, optical components, and other devices. They often have exposed mechanical structures which during assembly require particulate control, space in the package, non-contact handling procedures, low-stress die attach, precision die placement, unique process schedules, hermetic sealing in controlled environments (including vacuum), and other special constraints. These constraints force changes in the techniques used to separate die on a wafer, in the types of packages which can be used in the assembly processes and materials, and in the sealing environment and process. This paper discusses a number of these issues and provides information on approaches being taken or proposed to address them.

  20. STATISTICAL PROCESS CONTROL IN SERBIAN FOOD PACKAGING

    Directory of Open Access Journals (Sweden)

    Djekic Ilija

    2014-09-01

    Full Text Available This paper gives an overview of the food packaging process in seven food companies in the dairy and confectionery sector. A total of 23 production runs have been analyzed regarding the three packers' rules outlined in the Serbian legislation and process capability tests related to statistical process control. None of the companies had any type of statistical process control in place. Results confirmed that more companies show overweight packaging compared to underfilling. Production runs are more accurate than precise, although in some cases the productions are both inaccurate and imprecise. Education / training of the new generation of food industry workers (both on operational and managerial level with courses in the food area covering elements of quality assurance and statistical process control can help in implementing effective food packaging.