Exploring the role of curriculum materials to support teachers in science education reform

Science.gov (United States)

Schneider, Rebecca M.

2001-07-01

For curriculum materials to succeed in promoting large-scale science education reform, teacher learning must be supported. Materials were designed to reflect desired reforms and to be educative by including detailed lesson descriptions that addressed necessary content, pedagogy, and pedagogical content knowledge for teachers. The goal of this research was to describe how such materials contributed to classroom practices. As part of an urban systemic reform effort, four middle school teachers' initial enactment of an inquiry-based science unit on force and motion were videotaped. Enactments focused on five lesson sequences containing experiences with phenomena, investigation, technology use, or artifact development. Each sequence spanned three to five days across the 10-week unit. For each lesson sequence, intended and actual enactment were compared using ratings of (1) accuracy and completeness of science ideas presented, (2) amount student learning opportunities, similarity of learning opportunities with those intended, and quality of adaptations , and (3) amount of instructional supports offered, appropriateness of instructional supports and source of ideas for instructional supports. Ratings indicated two teachers' enactments were consistent with intentions and two teachers' enactments were not. The first two were in school contexts supportive of the reform. They purposefully used the materials to guide enactment, which tended to be consistent with standards-based reform. They provided students opportunities to use technology tools, design investigations, and discuss ideas. However, enactment ratings were less reflective of curriculum intent when challenges were greatest, such as when teachers attempted to present challenging science ideas, respond to students' ideas, structure investigations, guide small-group discussions, or make adaptations. Moreover, enactment ratings were less consistent in parts of lessons where materials did not include lesson specific

Application in localization of the material used for CRDM seismic support

International Nuclear Information System (INIS)

Wang Qingtian; He Peifeng; Mu Dianpeng

2011-01-01

CRDM seismic support stand in the top of reactor vessel head, and belong to LS equipment. Now all of the manufacture of CRDM seismic support are in China, so the materials localization of CRDM seismic support is quite vital. Comparing with chemical requirements, mechanical properties and hardness between foreign and domestic equipment material, the paper bring forward the base material and welding material. At last, mechanical analysis is adopted, and the result indicates the material localization meet the design requirements. (authors)

Additive Manufacturing of Overhang Structures Using Moisture-Cured Silicone with Support Material

Directory of Open Access Journals (Sweden)

Mohan Muthusamy

2018-04-01

Full Text Available Additive manufacturing (AM of soft materials has a wide variety of applications, such as customized or wearable devices. Silicone is one popular material for these applications given its favorable material properties. However, AM of silicone parts with overhang structures remains challenging due to the soft nature of the material. Overhang structures are the areas where there is no underlying structure. Typically, a support material is used and built in the underlying space so that the overhang structures can be built upon it. Currently, there is no support structure that has been used for AM of silicone. The goal of this study is to develop an AM process to fabricate silicone parts with overhang structures. We first identified and confirmed poly-vinyl alcohol (PVA, a water-soluble material, as a suitable support material for silicone by evaluating the adhesion strength between silicone and PVA. Process parameters for the support material, including critical overhang angle and minimum infill density for the support material, are identified. However, overhang angle alone is not the only determining factor for support material. As silicone is a soft material, it deflects due to its own weight when the height of the overhang structure increases. A finite element model is developed to estimate the critical overhang height paired with different overhang angles to determine whether the use of support material is needed. Finally, parts with overhang structures are printed to demonstrate the capability of the developed process.

Development of materials to support parents whose babies cry excessively: findings and health service implications.

Science.gov (United States)

Long, Jaqui; Powell, Charlotte; Bamber, Deborah; Garratt, Rosemary; Brown, Jayne; Dyson, Sue; James-Roberts, Ian St

2018-01-10

Aim To develop evidence-based materials which provide information and support for parents who are concerned about their baby's excessive crying. As well as meeting these parents' needs, the aim was to develop a package of materials suitable for use by the UK National Health Service (NHS). Parents report that around 20% of infants in Western countries cry excessively without an apparent reason during the first four months of age. Traditionally, research has focused on the crying and its causes. However, evidence is growing that how parents evaluate and respond to the crying needs to receive equal attention. This focus encompasses parental resources, vulnerabilities, well-being and mental health. At present, the UK NHS lacks a set of routine provisions to support parents who are concerned about their baby's excessive crying. The rationales, methods and findings from a study developing materials for this purpose are reported. Following a literature review, 20 parents whose babies previously cried excessively took part in focus groups or interviews. They provided reports on their experiences and the supports they would have liked when their baby was crying excessively. In addition, they identified their preferred delivery methods and devices for accessing information and rated four example support packages identified by the literature review. Findings During the period their baby cried excessively, most parents visited a health service professional and most considered these direct contacts to have provided helpful information and support. Websites were similarly popular. Telephones and tablets were the preferred means of accessing online information. Groups to meet other parents were considered an important additional resource by all the parents. Three package elements - a Surviving Crying website, a printed version of the website and a programme of Cognitive Behaviour Therapy-based support sessions delivered to parents by a qualified practitioner, were developed for

Logistic management materials-technical support railway enterprises

OpenAIRE

Dykan, V.; Borozenetc, T.

2014-01-01

The essence of logistics management. Determine the feasibility of applying the principles of logistics management in organizing the logistics of railway transport. Discussed measures to develop suppliers in the implementation of logistics management logistics. Identified the need to develop and implement regulatory and methodical system to improve materials-technical support through the introduction of modern logistics principles. Applied systemic campaign to organize the materials-technical ...

Supporting system in emergency response plan for nuclear material transport accidents

International Nuclear Information System (INIS)

Nakagome, Y.; Aoki, S.

1993-01-01

As aiming to provide the detailed information concerning nuclear material transport accidents and to supply it to the concerned organizations by an online computer, the Emergency Response Supporting System has been constructed in the Nuclear Safety Technology Center, Japan. The system consists of four subsystems and four data bases. By inputting initial information such as name of package and date of accident, one can obtain the appropriate initial response procedures and related information for the accident immediately. The system must be useful for protecting the public safety from nuclear material transport accidents. But, it is not expected that the system shall be used in future. (J.P.N.)

Corrosion performance of tube support materials

International Nuclear Information System (INIS)

Malagola, P.

1985-01-01

The problem of denting in steam generators leads to change in the conception of the tube support plates. A new material is now used for this component, a 13% Cr steel, which composition has been adjusted for weldability and mechanical resistance criteria. The geometry of trefoil support plate (TSP) has also been improved, using a broached TSP (quadrifoiled holes) instead of a drilled TSP. Tests have been performed on 13% Cr and C-steel broached TSP, and drilled TSP, to confirm the better resistance to denting of this new configuration

Health organizations providing and seeking social support: a Twitter-based content analysis.

Science.gov (United States)

Rui, Jian Raymond; Chen, Yixin; Damiano, Amanda

2013-09-01

Providing and seeking social support are important aspects of social exchange. New communication technologies, especially social network sites (SNSs), facilitate the process of support exchange. An increasing number of health organizations are using SNSs. However, how they provide and seek social support via SNSs has yet to garner academic attention. This study examined the types of social support provided and sought by health organizations on Twitter. A content analysis was conducted on 1,500 tweets sent by a random sample of 58 health organizations within 2 months. Findings indicate that providing informational and emotional support, as well as seeking instrumental support, were the main types of social support exchanged by health organizations through Twitter. This study provides a typology for studying social support exchanges by health organizations, and recommends strategies for health organizations regarding the effective use of Twitter.

How Materials Support Conceptual Blending in Ideation

DEFF Research Database (Denmark)

Biskjaer, Michael Mose; Fischel, Aron Daniel; Dove, Graham

2018-01-01

as an explanatory model to pry open the complexity of this activity, showing how research on design materials improves insight into how a design concept emerges. We show this empirically in a second-by- second analysis of a card-based design ideation episode using a multi-touch surface table. We offer process......-analytical evidence for the case that manipulation of design materials helps stabilize an emerging concept, as conceptual blending research has shown by analyzing artifacts, and extend this work by showing the dynamic interplay between the emerging conceptual blend and participants’ collaborative interaction...... with the materials. Our study advances understanding of interaction with materials in design ideation and aims to facilitate future research on how materials support conceptual blending as a useful model of how design concepts emerge....

Outsourcing customer support : The role of provider customer focus

NARCIS (Netherlands)

Wuyts, S.H.K.; Rindfleisch, A.; Citrin, A.

An increasing number of firms are outsourcing customer support to external service providers. This creates a triadic setting in which an outsourcing provider serves end customers on behalf of its clients. While outsourcing presents an opportunity to serve customers, service providers differ in their

FIRST TIME ONLINE LEARNERS’ PERCEPTIONS OF SUPPORT SERVICES PROVIDED

Directory of Open Access Journals (Sweden)

Stephanie HUNTE

2012-04-01

Full Text Available The number of online continuous education and training initiatives continues to increase in Caribbean Small Island Developing States (SIDS and by extension, the number of adult learners who are unfamiliar with the peculiarities of the online teaching and learning environment. The extent to which these learners can derive maximum benefit from these initiatives depends on the rate at which they can adapt to the new circumstances and, as a result, function effectively in this type of teaching and learning environment. To this end, while supporting learners is recognized as a critical success factor little has been explored or documented specific to the Caribbean-SIDS context. The purpose of this study therefore was to describe the support services provided first time online learners in the context of Caribbean-SIDS and examine what if any benefit learners derived from them through their perceptions of these services. The findings reveal that participants’ overall perception of the support services was high. They also reveal that although participants’ awareness of ongoing support services was variable, their rating of the need for and importance of this type of support was also high. The findings suggest that providing support for first time online learners in the context of Caribbean SIDS positively impacts their performance in the online teaching and learning environment.

Nanostructured TiOx as a catalyst support material for proton exchange membrane fuel cells

Science.gov (United States)

Phillips, Richard S.

Recent interest in the development of new catalyst support materials for proton exchange membrane fuel cells (PEMFCs) has stimulated research into the viability of TiO2-based support structures. Specifically, substoichiometric TiO2 (TiOx) has been reported to exhibit a combination of high conductivity, stability, and corrosion resistance. These properties make TiOx-based support materials a promising prospect when considering the inferior corrosion resistance of traditional carbon-based supports. This document presents an investigation into the formation of conductive and stable TiOx thin films employing atomic layer deposition (ALD) and a post deposition oxygen reducing anneal (PDORA). Techniques for manufacturing TiOx-based catalyst support nanostructures by means of ALD in conjunction with carbon black (CB), anodic aluminum oxide (AAO) and silicon nanowires (SiNWs) will also be presented. The composition and thickness of resulting TiOx thin films was determined with the aid of Auger electron spectroscopy (AES), Rutherford backscattering spectrometry (RBS), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). Film crystal structure was determined with X-ray diffraction (XRD) analysis. Film conductivity was calculated using four-point probe (4-PP) and film thickness measurement data. Resulting thin films show a significant decrease of oxygen in ALD TiOx films corresponding with a great increase in conductivity following the PDORA. The effectiveness of the PDORA was also found to be highly dependent on ALD process parameters. TiOx-based nanostructures were coated with platinum using one of three Pt deposition techniques. First, liquid phase deposition (LPD), which was performed at room temperature, provided equal access to catalyst support material surfaces which were suspended in solution. Second, plasma enhanced atomic layer deposition (PEALD), which was performed at 450°C, provided good Pt

Effects of catalyst-support materials on the performance of fuel cells

CSIR Research Space (South Africa)

Ejikeme, PM

2016-07-01

Full Text Available The operating life of a fuel cell is expected to be thousands of hours. One of the critical components of the fuel cell that will allow for such long-life cycle is the catalyst-support material. The support material is expected, amongst others...

Porous Materials to Support Bilayer Lipid Membranes for Ion Channel Biosensors

Directory of Open Access Journals (Sweden)

Thai Phung

2011-01-01

Full Text Available To identify materials suitable as membrane supports for ion channel biosensors, six filter materials of varying hydrophobicity, tortuosity, and thickness were examined for their ability to support bilayer lipid membranes as determined by electrical impedance spectroscopy. Bilayers supported by hydrophobic materials (PTFE, polycarbonate, nylon, and silanised silver had optimal resistance (14–19 GΩ and capacitance (0.8–1.6 μF values whereas those with low hydrophobicity did not form BLMs (PVDF or were short-lived (unsilanised silver. The ability of ion channels to function in BLMs was assessed using a method recently reported to improve the efficiency of proteoliposome incorporation into PTFE-supported bilayers. Voltage-gated sodium channel activation by veratridine and inhibition by saxitoxin showed activity for PTFE, nylon, and silanised silver, but not polycarbonate. Bilayers on thicker, more tortuous, and hydrophobic materials produced higher current levels. Bilayers that self-assembled on PTFE filters were the longest lived and produced the most channel activity using this method.

Reflections on providing sport science support for athletes with learning difficulties.

Science.gov (United States)

Hills, Laura; Utley, Andrea

2010-01-01

To highlight the benefits and the need for sport science support for athletes with learning difficulties, and to reflect on our experience of working with the GB squad for athletes with learning difficulties. A review of key and relevant literature is presented, followed by a discussion of the sport science support provision and the issues that emerged in working with athletes with learning difficulties. Pre- and post- physiological tests along with evaluations of athletes' potential to benefit from sport psychology support were conducted. The aim of these tests was to provide information for the athletes and the coaches on fitness levels, to use this information to plan future training, and to identify how well the performance could be enhanced. A case study is presented for one athlete, who had competed in distance events. The focus is the psychological support that was provided. It is clear that athletes with learning difficulties require the same type of sports science support as their mainstream peers. However, sport scientists will need to consider ways to extend their practice in order to provide the appropriate level of support.

Anisotropic microporous supports impregnated with polymeric ion-exchange materials

Science.gov (United States)

Friesen, Dwayne; Babcock, Walter C.; Tuttle, Mark

1985-05-07

Novel ion-exchange media are disclosed, the media comprising polymeric anisotropic microporous supports containing polymeric ion-exchange or ion-complexing materials. The supports are anisotropic, having small exterior pores and larger interior pores, and are preferably in the form of beads, fibers and sheets.

The anterior lens capsule used as support material in RPE cell-transplantation

DEFF Research Database (Denmark)

Nicolini, J; Kiilgaard, Jens Folke; Wiencke, A K

2000-01-01

To investigate the use of an ocular basement membrane as support material for transplanted porcine RPE cells.......To investigate the use of an ocular basement membrane as support material for transplanted porcine RPE cells....

Collaborative learning: A next step in the training of peer support providers.

Science.gov (United States)

Cronise, Rita

2016-09-01

This column explores how peer support provider training is enhanced through collaborative learning. Collaborative learning is an approach that draws upon the "real life" experiences of individual learners and encompasses opportunities to explore varying perspectives and collectively construct solutions that enrich the practice of all participants. This description draws upon published articles and examples of collaborative learning in training and communities of practice of peer support providers. Similar to person-centered practices that enhance the recovery experience of individuals receiving services, collaborative learning enhances the experience of peer support providers as they explore relevant "real world" issues, offer unique contributions, and work together toward improving practice. Three examples of collaborative learning approaches are provided that have resulted in successful collaborative learning opportunities for peer support providers. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Materials support for HITAF

International Nuclear Information System (INIS)

Breder, K.; Tennery, V.J.

1994-01-01

The purpose of this project is to compare structural ceramic materials proposed for use in the air heater of a coal fired high temperature advanced furnace (HITAF) for power generation. The work will provide necessary initial strength and statistical material parameters for design of a prototype system. Two teams are currently funded by Pittsburgh Energy Technology Center (PETC) under the Combustion 2000 program to develop such a system. One team is led by the United Technologies Research Corporation, and consists of UTC Turbo Power and Marine Division, Bechtel, Oak Ridge National Laboratory (ORNL) and a Joint Venture of Physical Sciences Inc. (PSI) Technologies, Reaction Engineering International (REI) and University of North Dakota Energy and Environmental Research Center (UNDERERC); the other team is led by Foster Wheeler Development Corporation, and members are AiResearch Division of AlliedSignal Aerospace Systems ampersand Equipment, Research Cottrell, TRW, General Electric and Bechtel

Providing Co-Curricular Support: A Multi-Case Study of Engineering Student Support Centers

Science.gov (United States)

Lee, Walter C., Jr.

2015-01-01

In response to the student retention and diversity issues that have been persistent in undergraduate engineering education, many colleges have developed Engineering Student Support Centers (ESSCs) such as Minority Engineering Programs (MEPs) and Women in Engineering Programs (WEPs). ESSCs provide underrepresented students with co-curricular…

Macintosh support is provided at the level of the Service Desk

CERN Multimedia

2011-01-01

Since September 2010 the Apple laptops & desktops with Mac OS are recognized and supported at CERN by the IT department. Therefore, the “Macintosh support” procedure now follows the same ITIL*) schema as for all IT services, i.e.: All CERN users must address any request for support on Macintosh PCs to the Service Desk. The Service Desk will move on questions or problems they cannot solve to “IT 2nd level” support people, provided by the “computing support” contract managed by IT department. Mac OS being officially supported by the IT department, a 3rd level support is provided by CERN IT staff; they may give specialized expert assistance, within the scope described at the ITUM-2 presentation, for all incidents or requests which can be neither resolved nor fulfilled by the Service Desk (1st level) and the 2nd level support people. Therefore, users who have problems related to Mac OS should simply fill-in the appropriate form from th...

Investigation of altenative carbon materials for fuel-cell catalyst support

DEFF Research Database (Denmark)

Larsen, Mikkel Juul

In order to ensure high utilization of the catalyst material in a polymer electrolyte membrane fuel cell (PEMFC) it is usually fixed in the form of nanoparticles on a supporting material. The catalyst is platinum or a platinum alloy, and the commonly used support is carbon black (CB). Although...... structured carbon forms such as graphitized CBs, carbon nanotubes (CNTs), and carbon nanofibres (CNFs). This thesis concerns the investigation of an array of different materials which may prospec-tively replace the conventional materials used in the catalyst. The study comprised 13 carbon samples which...... nanotubes (GMWCNTs), and graphitized carbon nanofibre (CNF), while the Pt/C samples were platinized samples of some of the CNTs and CNFs (Pt/FWCNT, Pt/GMWCNT, and Pt/CNF, respectively) as well as two commercial Pt/CB reference catalysts. Comparative analyses have been performed in order to be able to assess...

Synthesis and characterization of titanium oxide supported silica materials

Science.gov (United States)

Schrijnemakers, Koen

2002-01-01

Titania-silica materials are interesting materials for use in catalysis, both as a catalyst support as well as a catalyst itself. Titania-silica materials combine the excellent support and photocatalytic properties of titania with the high thermal and mechanical stability of silica. Moreover, the interaction of titania with silica leads to new active sites, such as acid and redox sites, that are not found on the single oxides. In this Ph.D. two recently developed deposition methods were studied and evaluated for their use to create titanium oxide supported silica materials, the Chemical Surface Coating (CSC) and the Molecular Designed Dispersion (MDD). These methods were applied to two structurally different silica supports, an amorphous silica gel and the highly ordered MCM-48. Both methods are based on the specific interaction between a titanium source and the functional groups on the silica surface. With the CSC method high amounts of titanium can be obtained. However, clustering of the titania phase is observed in most cases. The MDD method allows much lower titanium amounts to be deposited without the formation of crystallites. Only at the highest Ti loading very small crystallites are formed after calcination. MCM-48 and silica gel are both pure SiO2 materials and therefore chemically similar to each other. However, they possess a different morphology and are synthesized in a different way. As such, some authors have reported that the MCM-48 surface would be more reactive than the surface of silica gel. In our experiments however no differences could be observed that confirmed this hypothesis. In the CSC method, the same reactions were observed and similar amounts of Ti and Cl were deposited. In the case of the MDD method, no difference in the reaction mechanism was observed. However, due to the lower thermal and hydrothermal stability of the MCM-48 structure compared to silica gel, partial incorporation of Ti atoms in the pore walls of MCM-48 took place

Employer-provided support services and job dissatisfaction in Canadian registered nurses.

Science.gov (United States)

Wilkins, Kathryn; Shields, Margot

2012-10-01

Previous research indicates that nurses' job dissatisfaction relates to their work organization and environment; rarely has the contribution of employer provided support services been examined while controlling for the influence of other factors. The objective of this study was to examine job dissatisfaction among Canadian registered nurses in relation to employer-provided programs for child care and fitness or recreation. Data are from 2,993 respondents to the 2005 National Survey of the Work and Health of Nurses, weighted to represent Canada's 91,600 registered nurses in full-time, permanent positions who deliver direct care in hospitals or long-term care facilities. Multivariate modeling was used to examine job dissatisfaction in relation to employer-provided support programs, controlling for personal characteristics and variables reflecting work organization and the work environment. Employer-provided child care assistance programs were available to 16% of nurses, and fitness or recreation programs were available to 38%. An estimated 13% of nurses were dissatisfied with their jobs. Even when controlling for personal characteristics, overtime, shift work, shift length, weekly hours, overload, staffing inadequacy, autonomy, nurse-physician relations, and coworker respect, inverse associations with job dissatisfaction emerged for employer-supported child care (odds ratio = 0.49, 95% confidence interval = 0.27-0.88) and fitness programs (odds ratio = 0.65, 95% confidence interval = 0.42-0.99). This study provides new information suggesting that employer-provided support programs are protective against nurses' job dissatisfaction. This is a key finding in view of nursing shortages and the importance of job satisfaction to retention.

Evaluating the Effectiveness of Physlet-Based Materials in Supporting Conceptual Learning About Electricity

Science.gov (United States)

Ülen, Simon; Gerlič, Ivan; Slavinec, Mitja; Repnik, Robert

2017-04-01

To provide a good understanding of many abstract concepts in the field of electricity above that of their students is often a major challenge for secondary school teachers. Many educational researchers promote conceptual learning as a teaching approach that can help teachers to achieve this goal. In this paper, we present Physlet-based materials for supporting conceptual learning about electricity. To conduct research into the effectiveness of these materials, we designed two different physics courses: one group of students, the experimental group, was taught using Physlet-based materials and the second group of students, the control group, was taught using expository instruction without using Physlets. After completion of the teaching, we assessed students' thinking skills and analysed the materials with an independent t test, multiple regression analyses and one-way analysis of covariance. The test scores were significantly higher in the experimental group than in the control group ( p < 0.05). The results of this study confirmed the effectiveness of conceptual learning about electricity with the help of Physlet-based materials.

Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles

Energy Technology Data Exchange (ETDEWEB)

Das, S.; Curlee, T.R.; Jones, D.W.; Leiby, P.E.; Rubin, J.D.; Schexnayder, S.M.; Vogt, D.P.; Wolfe, A.K.

1999-03-01

To achieve its goal of producing vehicles that use two thirds less fuel than current vehicles, the Partnership of a New Generation of Vehicles (PNGV) is designing vehicles that will use lightweight materials in place of heavier materials used in current vehicles. using new materials in automobiles will require the development of a supporting infrastructure to produce both the substitute materials and the components of the substitute materials, as well as the automotive parts constructed from the new materials. This report documents a set of analyses that attempt to identify potential barriers--economic, infrastructure, and public acceptance barriers--to the materials substitution in New Generation Vehicles. The analyses rely on hypothetical vehicle market penetration scenarios and material composition. The approach is comprehensive, examining issues ranging from materials availability to their eventual disposition and its effect on the automobile recycling industry, and from supporting industries' capacity to the public acceptability of these vehicles. The analyses focus on two likely substitute materials, aluminum and glass-reinforced polymer composites.

The Work-Family Support Roles of Child Care Providers across Settings

Science.gov (United States)

Bromer, Juliet; Henly, Julia R.

2009-01-01

This paper presents a qualitative investigation of the work-family support roles of a sample of 29 child care providers serving low-income families in the Chicago area (16 family, friend, and neighbor providers (FFN), 7 licensed family child care providers (FCC), and 6 center-based teachers). Providers report offering low-income parents…

Providing support to nursing students in the clinical environment: a nursing standard requirement.

Science.gov (United States)

Anderson, Carina; Moxham, Lorna; Broadbent, Marc

2016-10-01

This discussion paper poses the question 'What enables or deters Registered Nurses to take up their professional responsibility to support undergraduate nursing students through the provision of clinical education?'. Embedded within many nursing standards are expectations that Registered Nurses provide support and professional development to undergraduate nursing students undertaking clinical placements. Expectations within nursing standards that Registered Nurses provide support and professional development to nursing students are important because nursing students depend on Registered Nurses to help them to become competent practitioners. Contributing factors that enable and deter Registered Nurses from fulfilling this expectation to support nursing students in their clinical learning include; workloads, preparedness for the teaching role, confidence in teaching and awareness of the competency requirement to support students. Factors exist which can enable or deter Registered Nurses from carrying out the licence requirement to provide clinical education and support to nursing students.

3D printing PLA and silicone elastomer structures with sugar solution support material

Science.gov (United States)

Hamidi, Armita; Jain, Shrenik; Tadesse, Yonas

2017-04-01

3D printing technology has been used for rapid prototyping since 1980's and is still developing in a way that can be used for customized products with complex design and miniature features. Among all the available 3D printing techniques, Fused Deposition Modeling (FDM) is one of the most widely used technologies because of its capability to build different structures by employing various materials. However, complexity of parts made by FDM is greatly limited by restriction of using support materials. Support materials are often used in FDM for several complex geometries such as fully suspended shapes, overhanging surfaces and hollow features. This paper describes an approach to 3D print a structure using silicone elastomer and polylactide fiber (PLA) by employing a novel support material that is soluble in water. This support material is melted sugar which can easily be prepared at a low cost. Sugar is a carbohydrate, which is found naturally in plants such as sugarcane and sugar beets; therefore, it is completely organic and eco-friendly. As another advantage, the time for removing this material from the part is considerably less than other commercially available support materials and it can be removed easily by warm water without leaving any trace. Experiments were done using an inexpensive desktop 3D printer to fabricate complex structures for use in soft robots. The results envision that further development of this system would contribute to a method of fabrication of complex parts with lower cost yet high quality.

Providing open-access online materials and hands-on sessions for GIS exercises

Science.gov (United States)

Oguchi, T.; Yamauchi, H.; Hayakawa, Y. S.

2017-12-01

Researchers of GIS (Geographical Information Systems/Sciences) in Japan have collaborated to provide materials for GIS lecture classes in universities for the last 20 years. The major outcomes include 1) a GIS core curriculum, 2) a GIS "body of knowledge" explaining the details of the curriculum, 3) a series of PowerPoint presentations, and 4) a comprehensive GIS textbook. However, materials for GIS exercises at university classes using GIS software have been limited in Japan. Therefore, we launched a project to provide such materials which will be available online and accessible by anybody. The materials cover broad basic aspects of GIS including geoscientific applications such as terrain analysis using digital elevation models. The materials utilize public-domain and open-source software packages such as QGIS and GRASS. The data used are also freely available ones such as those from the Geospatial Information Authority of Japan. The use of the GitHub platform to distribute the materials allow easier online interactions by both material producers and users. Selected sets of the materials have been utilized for hands-on activities including both official university classes and public instructions. We have been updating the materials based on the opinions of people who took the hands-on courses for better GIS education. The current materials are in Japanese, but we plan to translate some of them into English.

Materials Science Laboratory

Science.gov (United States)

Jackson, Dionne

2005-01-01

The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

Spreadsheet Decision Support Model for Training Exercise Material Requirements Planning

National Research Council Canada - National Science Library

Tringali, Arthur

1997-01-01

This thesis focuses on developing a spreadsheet decision support model that can be used by combat engineer platoon and company commanders in determining the material requirements and estimated costs...

Support to the physical protection and accountancy for nuclear materials in Kazakstan

International Nuclear Information System (INIS)

Hashimoto, Yu.; Yoshida, M.; Akutsu, M.; Takeda, H.

1998-01-01

The support programs for Republic of Kazakstan have been carried out for the purpose of establishing the State System of Accounting for and Control of Nuclear Material (SSAC). These support are based on the cooperation agreement for the elimination of nuclear weapons, that reached mutual agreement between both government of Japan and the Republic of Kazakstan in March, 1994, 1994. Japan, Sweden, the United Kingdom and the United States of America have conducted the support for Kazakstan. Since there are many facilities to be supported such as fast reactors, fuel fabrication facilities and research facilities, items to be supported are coordinated and shared among the supporting countries. Japan has been carrying out the supporting tasks mainly for the fast breeder reactor facility, BN-350 and Atomic Energy Agency of Kazakstan (KAEA). PESCO Co., Ltd. is entrusted this supporting work from Technical Secretariat on Cooperation for the Elimination of Nuclear Weapons Reduced in the Former Soviet Union, and has conducted the support in the area of flow monitoring system, nuclear material accounting and control and physical protection, obtaining technical cooperation from Power Reactor and Nuclear Development Corporation (PNC)

Strategic Materials

National Research Council Canada - National Science Library

Buhler, Carl; Burke, Adrian; Davis, Kirk; Gerhard, Michelle; Heil, Valerie; Hulse, Richard; Kwong, Ralph; Mahoney, Michael; Moran, Scott; Peek, Michael

2006-01-01

Some materials possess greater value than others. Materials that provide essential support for the nation's economic viability or enable critical military capabilities warrant special attention in security studies...

Ion beams provided by small accelerators for material synthesis and characterization

Science.gov (United States)

Mackova, Anna; Havranek, Vladimir

2017-06-01

The compact, multipurpose electrostatic tandem accelerators are extensively used for production of ion beams with energies in the range from 400 keV to 24 MeV of almost all elements of the periodic system for the trace element analysis by means of nuclear analytical methods. The ion beams produced by small accelerators have a broad application, mainly for material characterization (Rutherford Back-Scattering spectrometry, Particle Induced X ray Emission analysis, Nuclear Reaction Analysis and Ion-Microprobe with 1 μm lateral resolution among others) and for high-energy implantation. Material research belongs to traditionally progressive fields of technology. Due to the continuous miniaturization, the underlying structures are far beyond the analytical limits of the most conventional methods. Ion Beam Analysis (IBA) techniques provide this possibility as they use probes of similar or much smaller dimensions (particles, radiation). Ion beams can be used for the synthesis of new progressive functional nanomaterials for optics, electronics and other applications. Ion beams are extensively used in studies of the fundamental energetic ion interaction with matter as well as in the novel nanostructure synthesis using ion beam irradiation in various amorphous and crystalline materials in order to get structures with extraordinary functional properties. IBA methods serve for investigation of materials coming from material research, industry, micro- and nano-technology, electronics, optics and laser technology, chemical, biological and environmental investigation in general. Main research directions in laboratories employing small accelerators are also the preparation and characterization of micro- and nano-structured materials which are of interest for basic and oriented research in material science, and various studies of biological, geological, environmental and cultural heritage artefacts are provided too.

Application of the US decision support tool for materials and waste management

International Nuclear Information System (INIS)

Thorneloe, Susan A.; Weitz, Keith; Jambeck, Jenna

2007-01-01

The US Environmental Protection Agency (US EPA) launched the Resource Conservation Challenge (RCC) in 2002 to help reduce waste and move towards more sustainable resource consumption. The objective of the RCC is to help communities, industries, and the public think in terms of materials management rather than waste disposal. Reducing cost, finding more efficient and effective strategies to manage municipal waste, and thinking in terms of materials management requires a holistic approach that considers life-cycle environmental tradeoffs. The US EPA's National Risk Management Research Laboratory has led the development of a municipal solid waste decision support tool (MSW-DST). The computer software can be used to calculate life-cycle environmental tradeoffs and full costs of different waste management or materials recovery programs. The environmental methodology is based on the use of life-cycle assessment and the cost methodology is based on the use of full-cost accounting. Life-cycle inventory (LCI) environmental impacts and costs are calculated from the point of collection, handling, transport, treatment, and disposal. For any materials that are recovered for recycling, offsets are calculated to reflect potential emissions savings from use of virgin materials. The use of the MSW-DST provides a standardized format and consistent basis to compare alternatives. This paper provides an illustration of how the MSW-DST can be used by evaluating ten management strategies for a hypothetical medium-sized community to compare the life-cycle environmental and cost tradeoffs. The LCI results from the MSW-DST are then used as inputs into another US EPA tool, the Tool for the reduction and assessment of chemical and other environmental impacts, to convert the LCI results into impact indicators. The goal of this paper is to demonstrate how the MSW-DST can be used to identify and balance multiple criteria (costs and environmental impacts) when evaluating options for materials and

Effectiveness of a brief educational workshop intervention among primary care providers at 6 months: uptake of dental emergency supporting resources.

Science.gov (United States)

Skapetis, Tony; Gerzina, Tania M; Hu, Wendy; Cameron, W Ian

2013-01-01

Dental emergencies often present to primary care providers in general practice and Emergency Departments (ED), who may be unable to manage them effectively due to limited knowledge, skills and available resources. This may impact negatively on patient outcomes. Provision of a short educational workshop intervention in the management of such emergencies, including education in supporting resources, may provide a practical strategy for assisting clinicians to provide this aspect of comprehensive primary care. This descriptive study used a validated questionnaire survey instrument to measure the effectiveness of a short multimodal educational intervention through the uptake and perceived usefulness of supporting resources at 6 months following the intervention. Between 2009 and 2010, 15 workshops, of which eight were for regional and rural hospital ED doctors, were conducted by the same presenter using the same educational materials and training techniques. A sample of 181 workshop participants, 63% of whom were in rural or remote practice and engaged in providing primary care medical services, returned responses at 6 months on the perceived usefulness of the dental emergencies resource. Thirty percent of clinicians had used the dental emergencies resource within the six-month follow-up period. Significance was demonstrated between professional category and use of the resource, with emergency registrars utilising this resource most and GPs the least. The Dental Handbook, specifically designed for ED use, and tooth-filling material contained within this resource, were deemed the most useful components. There were overall positive open-ended question responses regarding the usefulness of the resource, especially when it was made available to clinicians who had attended the education workshops. Utilisation and perceived usefulness of a supporting resource at 6 months are indicators of the effectiveness of a short workshop educational intervention in the management of

Energetic materials research and development activities at Sandia National Laboratories supported under DP-10 programs

Energy Technology Data Exchange (ETDEWEB)

Ratzel, A.C. III

1998-09-01

This report provides summary descriptions of Energetic Materials (EM) Research and Development activities performed at Sandia National Laboratories and funded through the Department of Energy DP-10 Program Office in FY97 and FY98. The work falls under three major focus areas: EM Chemistry, EM Characterization, and EM Phenomenological Model Development. The research supports the Sandia component mission and also Sandia's overall role as safety steward for the DOE Nuclear Weapons Complex.

31 CFR 594.317 - Financial, material, or technological support.

Science.gov (United States)

2010-07-01

..., material, or technological support, as used in § 594.201(a)(4)(i) of this part, means any property, tangible or intangible, including but not limited to currency, financial instruments, securities, or any... transportation; or goods. “Technologies” as used in this definition means specific information necessary for the...

PROVIDING R-TREE SUPPORT FOR MONGODB

Directory of Open Access Journals (Sweden)

L. Xiang

2016-06-01

Full Text Available Supporting large amounts of spatial data is a significant characteristic of modern databases. However, unlike some mature relational databases, such as Oracle and PostgreSQL, most of current burgeoning NoSQL databases are not well designed for storing geospatial data, which is becoming increasingly important in various fields. In this paper, we propose a novel method to provide R-tree index, as well as corresponding spatial range query and nearest neighbour query functions, for MongoDB, one of the most prevalent NoSQL databases. First, after in-depth analysis of MongoDB’s features, we devise an efficient tabular document structure which flattens R-tree index into MongoDB collections. Further, relevant mechanisms of R-tree operations are issued, and then we discuss in detail how to integrate R-tree into MongoDB. Finally, we present the experimental results which show that our proposed method out-performs the built-in spatial index of MongoDB. Our research will greatly facilitate big data management issues with MongoDB in a variety of geospatial information applications.

Providing R-Tree Support for Mongodb

Science.gov (United States)

Xiang, Longgang; Shao, Xiaotian; Wang, Dehao

2016-06-01

Supporting large amounts of spatial data is a significant characteristic of modern databases. However, unlike some mature relational databases, such as Oracle and PostgreSQL, most of current burgeoning NoSQL databases are not well designed for storing geospatial data, which is becoming increasingly important in various fields. In this paper, we propose a novel method to provide R-tree index, as well as corresponding spatial range query and nearest neighbour query functions, for MongoDB, one of the most prevalent NoSQL databases. First, after in-depth analysis of MongoDB's features, we devise an efficient tabular document structure which flattens R-tree index into MongoDB collections. Further, relevant mechanisms of R-tree operations are issued, and then we discuss in detail how to integrate R-tree into MongoDB. Finally, we present the experimental results which show that our proposed method out-performs the built-in spatial index of MongoDB. Our research will greatly facilitate big data management issues with MongoDB in a variety of geospatial information applications.

A Guide to Providing Social Support for Apprentices. Good Practice Guide

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2016

2016-01-01

The main purpose of this guide is to provide some ideas for employers of apprentices to provide an environment in which strong informal bases of support can succeed. Formal mentoring is an important aspect of apprenticeships; however, it is also informal mentoring--practices that are difficult to formally nurture--that plays a significant and…

Swarm Intelligence: New Techniques for Adaptive Systems to Provide Learning Support

Science.gov (United States)

Wong, Lung-Hsiang; Looi, Chee-Kit

2012-01-01

The notion of a system adapting itself to provide support for learning has always been an important issue of research for technology-enabled learning. One approach to provide adaptivity is to use social navigation approaches and techniques which involve analysing data of what was previously selected by a cluster of users or what worked for…

Computerized real-time materials accountability system for safeguards material control

International Nuclear Information System (INIS)

Spencer, W.F.; Affel, R.G.; Austin, H.C.; Nichols, J.P.; Stoutt, B.H.; Wachter, J.W.

1975-01-01

A real-time, computer-based system is described which provides safeguards material control at the Oak Ridge National Laboratory. Originally installed in 1972 to provide computerized real-time fissile materials accountability for criticality control purposes, the system has been expanded to provide accountability of all source and nuclear materials (SNM) and to utilize the on-line inventory files in support of the Laboratory physical protection and surveillance procedures. (auth)

Electrodeless light source provided with radioactive material

International Nuclear Information System (INIS)

1979-01-01

Radioactive materials are used to assist in starting a discharge in an electrodeless light source. The radioactive emissions predispose on the inner surface of the lamp envelope loosely bound charges which thereafter assist in initiating discharge. The radioactive material can be enclosed within the lamp envelope in gaseous or non-gaseous form. Preferred materials are krypton 85 and americium 241. In addition, the radioactive material can be dispersed in the lamp envelope material or can be a pellet imbedded in the envelope material. Finally, the radioactive material can be located in the termination fixture. Sources of alpha particles, beta particles, or gamma rays are suitable. Because charges accumulate with time on the inner surface of the lamp envelope, activity levels as low as 10 -8 curie are effective as starting aids. (Auth.)

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

Energy Technology Data Exchange (ETDEWEB)

Liby, Alan L [ORNL; Rogers, Hiram [ORNL

2013-10-01

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work on advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.

Modelling intentions to provide smoking cessation support among mental health professionals in the Netherlands.

Science.gov (United States)

Blankers, Matthijs; Buisman, Renate; Hopman, Petra; van Gool, Ronald; van Laar, Margriet

2016-01-01

Tobacco use prevalence is elevated among people with mental illnesses, leading to elevated rates of premature smoking-related mortality. Opportunities to encourage smoking cessation among them are currently underused by mental health professionals. In this paper, we aim to explore mechanisms to invigorate professionals' intentions to help patients stop smoking. Data stem from a recent staff survey on the provision of smoking cessation support to patients with mental illnesses in the Netherlands. Items and underlying constructs were based on the theory of planned behaviour and literature on habitual behaviour. Data were weighted and only data from staff members with regular patient contact (n = 506) were included. Descriptive statistics of the survey items are presented and in a second step using structural equation modelling (SEM), we regressed the latent variables attitudes, subjective norms (SN), perceived behavioural control (PBC), past cessation support behaviour (PB) and current smoking behaviour on intentions to provide support. In optimisation steps, models comprising a subset of this initial model were evaluated. A sample of 506 mental health workers who had direct contact with patients completed the survey. The majority of them were females (70.0 %), respondents had an average age of 42.5 years (SD = 12.0). Seventy-five percent had at least a BSc educational background. Of the respondents, 76 % indicated that patients should be encouraged more to quit smoking. Respondents were supportive to train their direct colleagues to provide cessation support more often (71 %) and also supported the involvement of mental health care facilities in providing cessation support to patients (69 %). The majority of the respondents feels capable to provide cessation support (66 %). Two thirds of the respondents wants to provide support, however only a minority (35 %) intends to actually do so during the coming year. Next, using SEM an acceptable fit was

Providing Logistics Support to CDC-Deployed Staff for the Ebola Response in Liberia, Guinea, and Sierra Leone.

Science.gov (United States)

Dopson, Stephanie A; Rodriguez, Rockie; Rouse, Edward N

2015-11-01

The first Ebola cases in West Africa were reported by the Guinea Ministry of Health on March 23, 2014, and by June it became the largest recorded Ebola outbreak. Centers for Disease Control and Prevention field teams were deployed to West Africa, including in-country logistics staff who were critical for ensuring the movement of staff, equipment, and supplies to locations where public health knowledge and experience were applied to meet mission-related requirements. The logistics role was critical to creating the support for epidemiologists, medical doctors, laboratory staff, and health communicators involved in health promotion activities to successfully respond to the epidemic, both in the capital cities and in remote villages. Logistics personnel worked to procure equipment, such as portable video projectors, and have health promotion materials printed. Logistics staff also coordinated delivery of communication and health promotion materials to the embassy and provided assistance with distribution to various partners. © 2015 Society for Public Health Education.

Transport and Reactivity of Decontaminants to Provide Hazard Mitigation of Chemical Warfare Agents from Materials

Science.gov (United States)

2016-06-01

2013 4. TITLE AND SUBTITLE Transport and Reactivity of Decontaminants to Provide Hazard Mitigation of Chemical Warfare Agents from Materials 5a...directions for future decontamination formulation approaches. 15. SUBJECT TERMS GD HD Decontamination Hazard mitigation VX Chemical warfare agent... DECONTAMINANTS TO PROVIDE HAZARD MITIGATION OF CHEMICAL WARFARE AGENTS FROM MATERIALS 1. INTRODUCTION Decontamination of materials is the

Factors Supporting the Employment of Young Adult Peer Providers: Perspectives of Peers and Supervisors.

Science.gov (United States)

Delman, Jonathan; Klodnick, Vanessa V

2017-10-01

Peer providers are a promising practice for transition-age youth community mental health treatment engagement and support, yet little is known about the experience of being a young adult peer provider or what helps to make an individual in this role successful. Utilizing a capital theory lens, this study uses data from focus groups (two with young adult peer providers and two with their supervisors) to examine facilitators of young adult peer provider success in community mental health treatment settings. Eight factors were identified as critical to young adult peer provider on-the-job success: persistence, job confidence, resilience, job training, skilled communications with colleagues, regular and individualized supervision, support from colleagues, and family support. Findings suggest that young adult peer providers may benefit immensely from an agency level focus on fostering social organizational capital as well as more individualized efforts to increase cultural, social, and psychological capital through training and supervision.

LED provides engineering and electrooptics support to the Laser Program

International Nuclear Information System (INIS)

Pehrson, D.

1985-01-01

The work of the Laser Engineering Division is reviewed. The division provides engineering and electrooptics support to the laser program. The laser program has been an integral part of the efforts to explore the potential of lasers in harnessing thermonuclear fusion for energy and for defense-related physics studies and in efficiently separating fissile fuels

Rationales for Support That African American Grandmothers Provide to Their Children Who Are Parenting Adolescents

Science.gov (United States)

Sumo, Jen'nea; Dancy, Barbara; Julion, Wrenetha; Wilbur, JoEllen

2015-01-01

African American grandmothers are known to be a major source of support for their children who are parenting adolescents, but little is known about why they provide support. The purpose of this study was to describe the kinds of support provided by African American maternal and paternal grandmothers to their parenting adolescents and the reasons…

Doulas' Perspectives about Providing Support to Incarcerated Women: A Feasibility Study.

Science.gov (United States)

Shlafer, Rebecca J; Hellerstedt, Wendy L; Secor-Turner, Molly; Gerrity, Erica; Baker, Rae

2015-01-01

To document the logistical feasibility of a doula program for pregnant incarcerated women and to assess doulas' perceptions of their achievements. Six doulas provided written case notes ("birth stories") about their experiences with 18 pregnant women in one Midwestern state prison. The birth stories were analyzed by two coders to identify major themes related to doulas' perceptions about providing support to incarcerated women. Analyses involved coder consensus about major themes and doula affirmation of findings. All doulas reported that they met key objectives for a successful relationship with each of their clients. Key themes were their ability to empower clients, establish a trusting relationship, normalize the delivery, and support women as they were separated from their newborns. The intervention was logistically feasible, suggesting that doulas can adapt their practice for incarcerated women. Doulas may need specific training to prepare themselves for institutional restrictions that may conflict with the traditional roles of doula care. It may be important for doulas to understand the level of personal and professional resources they may have to expend to support incarcerated women if they are separated from their infants soon after delivery. © 2014 Wiley Periodicals, Inc.

Dynamic Use of Digital Library Material - Supporting Users with Typed Links in Open Hypermedia

DEFF Research Database (Denmark)

Grønbæk, Kaj; Hansen, Klaus Marius; Yndigegn, Christian

1999-01-01

This paper introduces a novel approach to supporting digital library users in organising and annotating material. We have extended the concept of open hypermedia by introducing typed links, which support: addition of (user-defined) semantics to hypertexts, user navigation, and machine supported...... analysis and synthesis of hypermedia structures. The Webvise open hypermedia system is integrated with the World Wide Web, and has been augmented with a type system. We illustrate the potential use in the context of digital libraries with a scenario of teachers jointly preparing a course based on digital...... library material....

Audit Report on 'The Department's Management of Nuclear Materials Provided to Domestic Licensees'

International Nuclear Information System (INIS)

2009-01-01

The objective if to determine whether the Department of Energy (Department) was adequately managing its nuclear materials provided to domestic licensees. The audit was performed from February 2007 to September 2008 at Department Headquarters in Washington, DC, and Germantown, MD; the Oak Ridge Office and the Oak Ridge National Laboratory in Oak Ridge, TN. In addition, we visited or obtained data from 40 different non-Departmental facilities in various states. To accomplish the audit objective, we: (1) Reviewed Departmental and Nuclear Regulatory Commission (NRC) requirements for the control and accountability of nuclear materials; (2) Analyzed a Nuclear Materials Management and Safeguards System (NMMSS) report with ending inventory balances for Department-owned nuclear materials dated September 30, 2007, to determine the amount and types of nuclear materials located at non-Department domestic facilities; (3) Held discussions with Department and NRC personnel that used NMMSS information to determine their roles and responsibilities related to the control and accountability over nuclear materials; (4) Selected a judgmental sample of 40 non-Department domestic facilities; (5) Met with licensee officials and sent confirmations to determine whether their actual inventories of Department-owned nuclear materials were consistent with inventories reported in the NMMSS; and, (6) Analyzed historical information related to the 2004 NMMSS inventory rebaselining initiative to determine the quantity of Department-owned nuclear materials that were written off from the domestic licensees inventory balances. This performance audit was conducted in accordance with generally accepted Government auditing standards. Those standards require that we plan and perform the audit to obtain sufficient, appropriate evidence to provide a reasonable basis for our findings and conclusions based on our audit objective. We believe that the evidence obtained provides a reasonable basis for our

IAEA support of international research and development of materials for sustainable energy applications

International Nuclear Information System (INIS)

Zeman, Andrej; Kaiser, Ralf; Simon, Aliz

2013-01-01

Full-text:The key mandate of the International Atomic Energy Agency (IAEA) is to promote the peaceful application of nuclear science and technology, verification as well as nuclear safety in the world. This includes a number of activities which aim to support the Member States and stimulate international cooperation in order for sustainable development. During the last 35 years, a well-established mechanism called the Coordinated Research Projects (CRP) has been effectively used to stimulate international research and scientific interaction among the Member States, covering various topics in the nuclear science and technology. Besides direct support of, so called coordinated research, the IAEA is also involved in organizing a number of highly specific international conferences and technical meetings which help to provide a broader platform for the specialist and experts in dedicated areas of nuclear science and technology. In view of support for renewable energy and its application, the IAEA organized series of meetings in 2009 (IEA France), 2010 (UQTR Canada) and 2011 (ANL USA) in order to discuss the scientific and technical issues of particular of national research initiatives related to the hydrogen storage and conversion technologies. All selected outputs of the meetings were published in a technical document publication series which are available to all member states. More recent initiatives are focus on the key nuclear techniques which are extremely valuable in research and development of new innovative materials, methods and technologies, characterization and performance testing of functional materials for innovative energy technologies and their application in sustainable energy sources (nuclear and non-nuclear). It is also important to underline that these programmatic activities are an integral part of the IAEA program on the Road to Rio+20: Applying Nuclear Technology for Sustainable Development. The paper summarizes the IAEA actions relevant to the

Carbon nanocages: a new support material for Pt catalyst with remarkably high durability.

Science.gov (United States)

Wang, Xiao Xia; Tan, Zhe Hua; Zeng, Min; Wang, Jian Nong

2014-03-24

Low durability is the major challenge hindering the large-scale implementation of proton exchange membrane fuel cell (PEMFC) technology, and corrosion of carbon support materials of current catalysts is the main cause. Here, we describe the finding of remarkably high durability with the use of a novel support material. This material is based on hollow carbon nanocages developed with a high degree of graphitization and concurrent nitrogen doping for oxidation resistance enhancement, uniform deposition of fine Pt particles, and strong Pt-support interaction. Accelerated degradation testing shows that such designed catalyst possesses a superior electrochemical activity and long-term stability for both hydrogen oxidation and oxygen reduction relative to industry benchmarks of current catalysts. Further testing under conditions of practical fuel cell operation reveals almost no degradation over long-term cycling. Such a catalyst of high activity, particularly, high durability, opens the door for the next-generation PEMFC for "real world" application.

Concerned parents, belligerent adolescent: Providing support to distressed parents

Directory of Open Access Journals (Sweden)

Siddharth Sarkar

2018-01-01

Full Text Available Societal changes have brought about transformation in the family dynamics in India. The youth of today is exposed to a wide variety of influences, and their tendency toward experimentation makes them vulnerable to get into unpleasant situations. Adding to that, issues related to use and abuse of substances sometimes bring them into contact with mental health professionals. Parents come with high expectations that the treatment provider would provide “treatment” that would miraculously mend the ways of the belligerent adolescent. The treatment provider may find himself or herself sandwiched between a poorly motivated, somewhat deviant adolescent and concerned parents who press for a lasting solution. The progression of therapeutic encounters presents certain challenges to the mental health professional. In this case discussion, I would like to present few issues and challenges and put forth some reflections about an adolescent with substance use and behavioral problems brought by family members. Over time, the stance of the therapist changed from attempting to “reform” the adolescent to providing support to the distressed parents. At the same time, the potential ways of dealing with such a situation are explored further.

A Digital Coach That Provides Affective and Social Learning Support to Low-Literate Learners

NARCIS (Netherlands)

Schouten, D.G.M.; Venneker, F.; Bosse, T.; Neerincx, M.; Cremer, A.H.M.

In this study, we investigate if a digital coach for low-literate learners that provides cognitive learning support based on scaffolding can be improved by adding affective learning support based on motivational interviewing, and social learning support based on small talk. Several knowledge gaps

Development of a British Road Safety Education Support Materials Curriculum.

Science.gov (United States)

Bouck, Linda H.

Road safety education needs to be a vital component in the school curriculum. This paper describes a planned road safety education support materials curriculum developed to aid educators in the Wiltshire County (England) primary schools. Teaching strategies include topic webs, lecture, class discussion, group activities, and investigative learning…

Electrode material comprising graphene-composite materials in a graphite network

Science.gov (United States)

Kung, Harold H.; Lee, Jung K.

2017-08-08

A durable electrode material suitable for use in Li ion batteries is provided. The material is comprised of a continuous network of graphite regions integrated with, and in good electrical contact with a composite comprising graphene sheets and an electrically active material, such as silicon, wherein the electrically active material is dispersed between, and supported by, the graphene sheets.

Writing for publication: institutional support provides an enabling environment.

Science.gov (United States)

Kramer, Beverley; Libhaber, Elena

2016-04-18

Due to the excessive service delivery loads in public hospitals supported by academic institutions in developing environments, researchers at these institutions have little time to develop scientific writing skills or to write up their research. It is imperative to expand the writing skills of researchers and train the next generation of health sciences academics in order to disseminate research findings. This study reports on the implementation of approaches for writing and publication and the extent of support to staff suffering from the overload of service delivery and of heavy teaching duties. Workshops in scientific writing and writing retreats were initiated and were offered to all staff. Feedback from participants of the writing skills workshops indicated that the workshops provided an injection of confidence and proficiency. Protected writing time resulted in 132 papers submitted to journals and 95 in preparation from 230 participants of the writing retreats over a two year period. Staff commended the off-site, collegial environment, which also supported future collaboration with new-found colleagues. This enabling environment facilitates not only the development of writing skills per se, but also the dissemination of the generated scientific knowledge. In addition, the training in writing skills of this generation will be of value in the training of future cohorts in countries with similar health care deliverables.

A Digital Coach That Provides Affective and Social Learning Support to Low-Literate Learners

Science.gov (United States)

Schouten, Dylan G. M.; Venneker, Fleur; Bosse, Tibor; Neerincx, Mark A.; Cremers, Anita H. M.

2018-01-01

In this study, we investigate if a digital coach for low-literate learners that provides cognitive learning support based on scaffolding can be improved by adding affective learning support based on motivational interviewing, and social learning support based on small talk. Several knowledge gaps are identified: motivational interviewing and small…

Nanostructured Carbon Materials as Supports in the Preparation of Direct Methanol Fuel Cell Electrocatalysts

Directory of Open Access Journals (Sweden)

María Jesús Lázaro

2013-08-01

Full Text Available Different advanced nanostructured carbon materials, such as carbon nanocoils, carbon nanofibers, graphitized ordered mesoporous carbons and carbon xerogels, presenting interesting features such as high electrical conductivity and extensively developed porous structure were synthesized and used as supports in the preparation of electrocatalysts for direct methanol fuel cells (DMFCs. The main advantage of these supports is that their physical properties and surface chemistry can be tailored to adapt the carbonaceous material to the catalytic requirements. Moreover, all of them present a highly mesoporous structure, diminishing diffusion problems, and both graphitic character and surface area can be conveniently modified. In the present work, the influence of the particular features of each material on the catalytic activity and stability was analyzed. Results have been compared with those obtained for commercial catalysts supported on Vulcan XC-72R, Pt/C and PtRu/C (ETEK. Both a highly ordered graphitic and mesopore-enriched structure of these advanced nanostructured materials resulted in an improved electrochemical performance in comparison to the commercial catalysts assayed, both towards CO and alcohol oxidation.

Wear behavior of 2-1/4 Cr-1Mo tubing against alloy 718 tube-support material in sodium-cooled steam generators

International Nuclear Information System (INIS)

Wilson, W.L.

1983-05-01

A series of prototypic steam generator 2-1/4 Cr-1 Mo tube/alloy 718 tube support plate wear tests were conducted in direct support of the Westinghouse Nuclear Components Division -- Breeder Reactor Components Project Large Scale steam Generator design. The initial objective was to verify the acceptable wear behavior of softer, ''over-aged'' alloy 718 support plate material. For all interfaces under all test conditions, resultant wear damage was adhesive in nature with varying amounts of 2-1/4 Cr-1 Mo tube material being adhesively transferred to the alloy 718 tube supports. Maximum tube wear depths exceeded the initially established design allowable limit of 127 μm (.005 in.) at 17 of the 18 interfaces tested. A decrease in contact stresses produced acceptable tube wear depths below a readjusted maximum design allowable value of 381 μm (.015 in.). Additional conservatisms associated with the simulation of a 40-year lifetime of rubbing in a one-week laboratory test provided further confidence that the 381 μm maximum tube wear allowance would not be exceeded in service. Softer, ''over-aged'' alloy 718 material was found to produce slightly less wear damage on 2-1/4 Cr-1 Mo tubing than fully age hardened material. Also, air formed oxide films on the alloy 718 reduced initial tube wear and delayed the onset of adhesive surface damage. However, at high surface stress levels, these films were not sufficiently stable to provide adequate long term protection from adhesive wear. The results of the present work and those of previous test programs suggest that the successful in-sodium tribological performance of 2-1/4 Cr-1 Mo/alloy 718 rubbing couples is dependent upon the presence of lubricative surface films, such as oxides and/or surface reaction or deposition products. 11 refs., 13 figs., 4 tabs

Use of Intranasal Naloxone by Basic Life Support Providers.

Science.gov (United States)

Weiner, Scott G; Mitchell, Patricia M; Temin, Elizabeth S; Langlois, Breanne K; Dyer, K Sophia

2017-01-01

Intranasal delivery of naloxone to reverse the effects of opioid overdose by Advanced Life Support (ALS) providers has been studied in several prehospital settings. In 2006, in response to the increase in opioid-related overdoses, a special waiver from the state allowed administration of intranasal naloxone by Basic Life Support (BLS) providers in our city. This study aimed to determine: 1) if patients who received a 2-mg dose of nasal naloxone administered by BLS required repeat dosing while in the emergency department (ED), and 2) the disposition of these patients. This was a retrospective review of patients transported by an inner-city municipal ambulance service to one of three academic medical centers. We included patients aged 18 and older that were transported by ambulance between 1/1/2006 and 12/12/2012 and who received intranasal naloxone by BLS providers as per a state approved protocol. Site investigators matched EMS run data to patients from each hospital's EMR and performed a chart review to confirm that the patient was correctly identified and to record the outcomes of interest. Descriptive statistics were then generated. A total of 793 patients received nasal naloxone by BLS and were transported to three hospitals. ALS intervened and transported 116 (14.6%) patients, and 11 (1.4%) were intubated in the field. There were 724 (91.3%) patients successfully matched to an ED chart. Hospital A received 336 (46.4%) patients, Hospital B received 210 (29.0%) patients, and Hospital C received 178 (24.6%) patients. Mean age was 36.2 (SD 10.5) years and 522 (72.1%) were male; 702 (97.1%) were reported to have abused heroin while 21 (2.9%) used other opioids. Nasal naloxone had an effect per the prehospital record in 689 (95.2%) patients. An additional naloxone dose was given in the ED to 64 (8.8%) patients. ED dispositions were: 507 (70.0%) discharged, 105 (14.5%) admitted, and 112 (15.5%) other (e.g., left against medical advice, left without being seen, or

Material Not Categorized As Waste (MNCAW) data report. Radioactive Waste Technical Support Program

Energy Technology Data Exchange (ETDEWEB)

Casey, C.; Heath, B.A.

1992-11-01

The Department of Energy (DOE), Headquarters, requested all DOE sites storing valuable materials to complete a questionnaire about each material that, if discarded, could be liable to regulation. The Radioactive Waste Technical Support Program entered completed questionnaires into a database and analyzed them for quantities and type of materials stored. This report discusses the data that TSP gathered. The report also discusses problems revealed by the questionnaires and future uses of the data. Appendices contain selected data about material reported.

Diabetes self-management support for patients with low health literacy: Perceptions of patients and providers.

Science.gov (United States)

Fransen, Mirjam P; Beune, Erik J A J; Baim-Lance, Abigail M; Bruessing, Raynold C; Essink-Bot, Marie-Louise

2015-05-01

The aim of the present study was to explore perceptions and strategies of health care providers regarding diabetes self-management support for patients with low health literacy (LHL), and to compare their self-management support with the needs of patients with LHL and type 2 diabetes. This study serves as a problem analysis for systematic intervention development to improve diabetes self-management among patients with LHL. This qualitative study used in-depth interviews with general practitioners (n = 4), nurse practitioners (n = 5), and patients with LHL (n = 31). The results of the interviews with health care providers guided the patient interviews. In addition, we observed 10 general practice consultations. Providers described patients with LHL as uninvolved and less motivated patients who do not understand self-management. Their main strategy to improve self-management was to provide standard information on a repeated basis. Patients with LHL seemed to have a different view of diabetes self-management than their providers. Most demonstrated a low awareness of what self-management involves, but did not express needing more information. They reported several practical barriers to self-management, although they seemed reluctant to use the information provided to overcome them. Providing and repeating information does not fit the needs of patients with LHL regarding diabetes self-management support. Health care providers do not seem to have the insight or the tools to systematically support diabetes self-management in this group. Systematic intervention development with a focus on skills-based approaches rather than cognition development may improve diabetes self-management support of patients with LHL. © 2014 Ruijin Hospital, Shanghai Jiaotong University School of Medicine and Wiley Publishing Asia Pty Ltd.

Composite material

Science.gov (United States)

Hutchens, Stacy A [Knoxville, TN; Woodward, Jonathan [Solihull, GB; Evans, Barbara R [Oak Ridge, TN; O'Neill, Hugh M [Knoxville, TN

2012-02-07

A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

Capturing information needs of care providers to support knowledge sharing and distributed decision making.

Science.gov (United States)

Rogers, M; Zach, L; An, Y; Dalrymple, P

2012-01-01

This paper reports on work carried out to elicit information needs at a trans-disciplinary, nurse-managed health care clinic that serves a medically disadvantaged urban population. The trans-disciplinary model provides a "one-stop shop" for patients who can receive a wide range of services beyond traditional primary care. However, this model of health care presents knowledge sharing challenges because little is known about how data collected from the non-traditional services can be integrated into the traditional electronic medical record (EMR) and shared with other care providers. There is also little known about how health information technology (HIT) can be used to support the workflow in such a practice. The objective of this case study was to identify the information needs of care providers in order to inform the design of HIT to support knowledge sharing and distributed decision making. A participatory design approach is presented as a successful technique to specify requirements for HIT applications that can support a trans-disciplinary model of care. Using this design approach, the researchers identified the information needs of care providers working at the clinic and suggested HIT improvements to integrate non-traditional information into the EMR. These modifications allow knowledge sharing among care providers and support better health decisions. We have identified information needs of care providers as they are relevant to the design of health information systems. As new technology is designed and integrated into various workflows it is clear that understanding information needs is crucial to acceptance of that technology.

Carbon Nitride Materials as Efficient Catalyst Supports for Proton Exchange Membrane Water Electrolyzers

Directory of Open Access Journals (Sweden)

Ana Belen Jorge

2018-06-01

Full Text Available Carbon nitride materials with graphitic to polymeric structures (gCNH were investigated as catalyst supports for the proton exchange membrane (PEM water electrolyzers using IrO2 nanoparticles as oxygen evolution electrocatalyst. Here, the performance of IrO2 nanoparticles formed and deposited in situ onto carbon nitride support for PEM water electrolysis was explored based on previous preliminary studies conducted in related systems. The results revealed that this preparation route catalyzed the decomposition of the carbon nitride to form a material with much lower N content. This resulted in a significant enhancement of the performance of the gCNH-IrO2 (or N-doped C-IrO2 electrocatalyst that was likely attributed to higher electrical conductivity of the N-doped carbon support.

Studies on the core-support carbon material for VHTR, (1)

International Nuclear Information System (INIS)

Matsuo, Hideto; Saito, Tamotsu; Fukuda, Yasumasa; Sasaki, Yasuichi; Hasegawa, Takashi.

1979-11-01

To obtain information of core-support carbon material for VHTR, thermal conductivity and electrical resistivity of three domestic carbon blocks were measured. Results indicated the need for development of carbon material with lower thermal conductivity for VHTR. These two were also measured of the samples heat-treated between 1000 0 C and 3040 0 C for one hour. Thermal conductivity increased with heat-treatment above 1200 0 C and resistivity stayed constant between 1500 0 C and 2000 0 C. The results should be useful in choosing the final heat-treatment temperature in carbon material production. The changes of Lorentz number with heat treatment were classified into three heat-treatment temperature regions of below 1500 0 C, 1500 0 C - 2500 0 C, and above 2500 0 C; the results are interpreted with a graphitization model. (author)

[Modern approaches to the planning of the medical material support in conditions of daily activities].

Science.gov (United States)

Miroshnichenko, Iu V; Goriachev, A B; Krasavin, K D; Tikhonov, A V

2012-07-01

There are requirements producing to the planning in modem social and economic conditions: solidarity, participation, continuity, flexibility, accuracy. The authors made a conclusion that the main target of the planning of the medical material support is creating of conditions for highly effective function of the system of medical material support on the basis of long-time forecast of status and development of inner and outer factors.

In-vivo job development training among peer providers of homeless veterans supported employment programs.

Science.gov (United States)

Gao, Ni; Dolce, Joni; Rio, John; Heitzmann, Carma; Loving, Samantha

2016-06-01

This column describes a goal-oriented, time-limited in vivo coaching/training approach for skills building among peer veterans vocational rehabilitation specialists of the Homeless Veteran Supported Employment Program (HVSEP). Planning, implementing, and evaluating the training approach for peer providers was intended, ultimately, to support veterans in their goal of returning to community competitive employment. The description draws from the training experience that aimed to improve the ability of peer providers to increase both rates of employment and wages of the homeless veterans using their services. Training peers using an in vivo training approach provided a unique opportunity for the veterans to improve their job development skills with a focus to support employment outcomes for the service users. Peers who received training also expressed that learning skills through an in vivo training approach was more engaging than typical classroom trainings. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

The Role of Health Care Provider and Partner Decisional Support in Patients' Cancer Treatment Decision-Making Satisfaction.

Science.gov (United States)

Palmer-Wackerly, Angela L; Krieger, Janice L; Rhodes, Nancy D

2017-01-01

Cancer patients rely on multiple sources of support when making treatment decisions; however, most research studies examine the influence of health care provider support while the influence of family member support is understudied. The current study fills this gap by examining the influence of health care providers and partners on decision-making satisfaction. In a cross-sectional study via an online Qualtrics panel, we surveyed cancer patients who reported that they had a spouse or romantic partner when making cancer treatment decisions (n = 479). Decisional support was measured using 5-point, single-item scales for emotional support, informational support, informational-advice support, and appraisal support. Decision-making satisfaction was measured using Holmes-Rovner and colleagues' (1996) Satisfaction With Decision Scale. We conducted a mediated regression analysis to examine treatment decision-making satisfaction for all participants and a moderated mediation analysis to examine treatment satisfaction among those patients offered a clinical trial. Results indicated that partner support significantly and partially mediated the relationship between health care provider support and patients' decision-making satisfaction but that results did not vary by enrollment in a clinical trial. This study shows how and why decisional support from partners affects communication between health care providers and cancer patients.

Functions, Use and Effects of Embedded Support Devices in Printed Distance Learning Materials.

Science.gov (United States)

Martens, Rob; And Others

1996-01-01

To support distance learning, printed materials for the course are enriched with embedded support devices (ESD) such as schemes, illustrations, examples, questions, or margin texts. Results of 3 studies involving 900 Dutch university students indicated that students used and appreciated ESD, and that they led to better study results. (SLD)

Characteristics of Adults Seeking Health Care Provider Support Facilitated by Mobile Technology: Secondary Data Analysis.

Science.gov (United States)

Bosak, Kelly; Park, Shin Hye

2017-12-21

Mobile health technology is rapidly evolving with the potential to transform health care. Self-management of health facilitated by mobile technology can maximize long-term health trajectories of adults. Little is known about the characteristics of adults seeking Web-based support from health care providers facilitated by mobile technology. This study aimed to examine the following: (1) the characteristics of adults who seek human support from health care providers for health concerns using mobile technology rather than from family members and friends or others with similar health conditions and (2) the use of mobile health technology among adults with chronic health conditions. Findings of this study were interpreted in the context of the Efficiency Model of Support. We first described characteristics of adults seeking Web-based support from health care providers. Using chi-square tests for categorical variables and t test for the continuous variable of age, we compared adults seeking Web-based and conventional support by demographics. The primary aim was analyzed using multivariate logistic regression to examine whether chronic health conditions and demographic factors (eg, sex, income, employment status, race, ethnicity, education, and age) were associated with seeking Web-based support from health care providers. The sample included adults (N=1453), the majority of whom were female 57.60% (837/1453), white 75.02% (1090/1453), and non-Hispanic 89.13% (1295/1453). The age of the participants ranged from 18 to 92 years (mean 48.6, standard deviation [SD] 16.8). The majority 76.05% (1105/1453) of participants reported college or higher level of education. A disparity was found in access to health care providers via mobile technology based on socioeconomic status. Adults with annual income of US $30,000 to US $100,000 were 1.72 times more likely to use Web-based methods to contact a health care provider, and adults with an annual income above US $100,000 were 2.41 to

The effect of providing climate and health information on support for alternative electricity portfolios

Science.gov (United States)

Sergi, Brian; Davis, Alex; Azevedo, Inês

2018-02-01

Support for addressing climate change and air pollution may depend on the type of information provided to the public. We conduct a discrete choice survey assessing preferences for combinations of electricity generation portfolios, electricity bills, and emissions reductions. We test how participants’ preferences change when emissions information is explicitly provided to them. We find that support for climate mitigation increases when mitigation is accompanied by improvements to air quality and human health. We estimate that an average respondent would accept an increase of 19%-27% in their electricity bill if shown information stating that either CO2 or SO2 emissions are reduced by 30%. Furthermore, an average respondent is willing to pay an increase of 30%-40% in electricity bills when shown information stating that both pollutants are reduced by 30% simultaneously. Our findings suggest that the type of emissions information provided to the public will affect their support for different electricity portfolios.

Social reintegration of TBI patients: a solution to provide long-term support.

Science.gov (United States)

Bulinski, Leszek

2010-01-01

This article evaluates the effectiveness of a workable long-term program to provide social support for TBI patients, based on the "Academy of Life" concept. Disability after TBI causes numerous disruptions of normal life, which affect the patient, the family, and society. The patient needs the particular kind of support the program was designed to provide. The study involved 200 married couples with a TBI spouse previously enrolled in the "Academy of Life." The methods included documentation analysis, clinical interviews, the Family Bonds Scale, the Social Isolation Scale, and the Social Functions subscale from a battery used to evaluate QOL after TBI. The subjects were examined before and after completing the program. In the first examination all types of family bonds were found to be severely weakened; there was deep social isolation, loneliness, sadness, a feeling of being surrounded by hostility, and no purposeful social activity. The most common form of support from significant others was pity and unwanted interference, accompanied by lack of understanding and social ostracism. In the second examination there was selective improvement of all parameters, significantly greater in patients without PTSD symptoms. The best effects were achieved in the reduction of social dysfunctions, the growth of purposeful social activity, and improvement in the type of support received, and a reduction of selected parameters of social isolation. The program here described is selectively effective for the social reintegration of TBI-patients, especially those without PTSD symptoms.

Investigating the role of educative curriculum materials in supporting teacher enactment of a field-based urban ecology investigation

Science.gov (United States)

Houle, Meredith

2008-10-01

This multiple case study examined how three urban science teachers used curriculum materials designed educatively. Educative curriculum materials have been suggested as one way to support science teacher learning, particularly around new innovations and new pedagogies and to support teachers in evaluating and modifying materials to meet the needs of their students (Davis & Krajcik, 2005). While not a substitute for professional development, educative curriculum materials may provide an opportunity to support teachers' enactment and learning in the classroom context (Davis & Krajcik, 2005; Remillard, 2005; Schneider & Krajcik, 2002). However, little work has examined how science teachers interact with written curriculum materials to design classroom instruction. Grounded in sociocultural analysis, this study takes the theoretical stance that teachers and curriculum materials are engaged in a dynamic and participatory relationship from which the planned and enacted curriculum emerges (Remillard, 2005). Teaching is therefore a design activity where teachers rely on their personal resources and the curricular resources to construct and shape their students' learning experiences (Brown, 2002). Specifically this study examines how teacher beliefs influence their reading and use of curriculum and how educative features in the written curriculum inform teachers' pedagogical decisions. Data sources included classroom observation and video, teacher interviews, and classroom artifacts. To make sense how teachers' make curricular decisions, video were analyzed using Brown's (2002) Pedagogical Design for Enactment Framework. These coded units were examined in light of the teacher interviews, classroom notes and artifacts to examine how teachers' beliefs influenced these decisions. Data sources were then reexamined for evidence of teachers' use of specific educative features. My analyses revealed that teachers' beliefs about curriculum influenced the degree to which teachers

Influence of the supporting die structures on the fracture strength of all-ceramic materials.

Science.gov (United States)

Yucel, Munir Tolga; Yondem, Isa; Aykent, Filiz; Eraslan, Oğuz

2012-08-01

This study investigated the influence of the elastic modulus of supporting dies on the fracture strengths of all-ceramic materials used in dental crowns. Four different types of supporting die materials (dentin, epoxy resin, brass, and stainless steel) (24 per group) were prepared using a milling machine to simulate a mandibular molar all-ceramic core preparation. A total number of 96 zirconia cores were fabricated using a CAD/CAM system. The specimens were divided into two groups. In the first group, cores were cemented to substructures using a dual-cure resin cement. In the second group, cores were not cemented to the supporting dies. The specimens were loaded using a universal testing machine at a crosshead speed of 0.5 mm/min until fracture occurred. Data were statistically analyzed using two-way analysis of variance and Tukey HSD tests (α = 0.05). The geometric models of cores and supporting die materials were developed using finite element method to obtain the stress distribution of the forces. Cemented groups showed statistically higher fracture strength values than non-cemented groups. While ceramic cores on stainless steel dies showed the highest fracture strength values, ceramic cores on dentin dies showed the lowest fracture strength values among the groups. The elastic modulus of the supporting die structure is a significant factor in determining the fracture resistance of all-ceramic crowns. Using supporting die structures that have a low elastic modulus may be suitable for fracture strength tests, in order to accurately reflect clinical conditions.

Ovarian Cancer Knowledge in Women and Providers Following Education with Inside Knowledge Campaign Materials.

Science.gov (United States)

Puckett, Mary C; Townsend, Julie S; Gelb, Cynthia A; Hager, Polly; Conlon, Amy; Stewart, Sherri L

2017-06-24

Because no effective methods for preventing or screening for ovarian cancer exist, symptom recognition is integral to its early detection. The Centers for Disease Control and Prevention's Inside Knowledge: Get the Facts about Gynecologic Cancer campaign was developed to raise awareness and educate women and providers about risk factors, symptoms, recommended screening, and prevention strategies for the five main gynecologic cancers, including ovarian cancer. Inside Knowledge campaign materials were utilized by CDC's National Comprehensive Cancer Control Program grantees to educate women and providers about gynecologic cancer from 2014 to 2015. Grantees recruited participants and held educational sessions using Inside Knowledge materials. Questionnaires were given before and after the sessions to assess changes in awareness, confidence, and behavioral intentions around gynecologic cancer information and analyzed in 2016. This analysis focused on an assessment of changes related to ovarian cancer information. Participants' knowledge increased after educational sessions. Among women, there were increases in correctly identifying that the Papanicolaou (Pap) test does not screen for ovarian cancer (89.2%) and that genetic testing is available (77.9%). There was a lower increase in knowledge that HPV is not a cause of ovarian cancer (56.4%). Providers and women reported significant increases in their confidence in their ability to talk to each other about gynecologic cancer post-session. Ovarian cancer awareness, confidence, and related behaviors increased in participants exposed to Inside Knowledge materials. Using these materials to increase knowledge could lead to more empowered patients, better provider-patient communications, and improved care for gynecologic cancers, including ovarian cancer.

Understanding Older Adult's Perceptions of Factors that Support Trust in Human and Robot Care Providers.

Science.gov (United States)

Stuck, Rachel E; Rogers, Wendy A

2017-06-01

As the population of older adults increase so will the need for care providers, both human and robot. Trust is a key aspect to establish and maintain a successful older adult-care provider relationship. However, due to trust volatility it is essential to understand it within specific contexts. This proposed mixed methods study will explore what dimensions of trust emerge as important within the human-human and human-robot dyads in older adults and care providers. First, this study will help identify key qualities that support trust in a care provider relationship. By understanding what older adults perceive as needing to trust humans and robots for various care tasks, we can begin to provide recommendations based on user expectations for design to support trust.

SupportNet for Frontline Behavioral Health Providers

Science.gov (United States)

2014-06-30

to help women and their children achieve safety and wellbeing while challenging communities to end sexual and family violence. In the process, TESSA...did not engage with the SupportNet intervention as a function of their level of burnout. Lack of military support was cited by staff as being a barrier...October 2013, which resulted in government employees being furloughed. Since the project itself was funded by the Department of Defense, the project was

A life cycle framework to support materials selection for Ecodesign: A case study on biodegradable polymers

International Nuclear Information System (INIS)

Ribeiro, I.; Peças, P.; Henriques, E.

2013-01-01

Highlights: • Life cycle framework to support material selection in Ecodesign. • Early design stage estimates and sensitivity analyses based on process-based models. • Sensitivity analysis to product geometry, industrial context and EoL scenarios. • Cost and environmental performance comparison – BDP vs. fossil based polymers. • Best alternatives mapping integrating cost and environmental performances. - Abstract: Nowadays society compels designers to develop more sustainable products. Ecodesign directs product design towards the goal of reducing environmental impacts. Within Ecodesign, materials selection plays a major role on product cost and environmental performance throughout its life cycle. This paper proposes a comprehensive life cycle framework to support Ecodesign in material selection. Dealing with new materials and technologies in early design stages, process-based models are used to represent the whole life cycle and supply integrated data to assess material alternatives, considering cost and environmental dimensions. An integrated analysis is then proposed to support decision making by mapping the best alternative materials according to the importance given to upstream and downstream life phases and to the environmental impacts. The proposed framework is applied to compare the life cycle performance of injection moulded samples made of four commercial biodegradable polymers with different contents of Thermo Plasticized Starch and PolyLactic Acid and a common fossil based polymer, Polypropylene. Instead of labelling materials just as “green”, the need to fully capture all impacts in the whole life cycle was shown. The fossil based polymer is the best economic alternative, but polymers with higher content of Thermo Plasticized Starch have a better environmental performance. However, parts geometry and EoL scenarios play a major role on the life cycle performance of candidate materials. The selection decision is then supported by mapping

Inorganic Materials as Supports for Covalent Enzyme Immobilization: Methods and Mechanisms

Directory of Open Access Journals (Sweden)

Paolo Zucca

2014-09-01

Full Text Available Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides.

An Action Research in Science: Providing Metacognitive Support to Year 9 Students

Science.gov (United States)

Wagaba, Francis; Treagust, David F.; Chandrasegaran, A. L.; Won, Mihye

2016-01-01

An action research study was designed to evaluate the effectiveness of providing metacognitive support to enhance Year 9 students' metacognitive capabilities in order to better understand science concepts related to light, environmental health, ecosystems, genetics, ecology, atoms and the Periodic Table. The study was conducted over three years…

Experience in working with volunteers as providers of support to victims and witnesses in victim and witness support departments at the courts

Directory of Open Access Journals (Sweden)

Hamer-Vidmar Nikica

2015-01-01

Full Text Available The aim of this paper is to present the results of a survey on the experience of engaging volunteers as providers of support for victims and witnesses in Victim and Witness Support Departments at the courts. The Independent Service for Victim and Witness Support in Ministry of Justice is responsible for the development of the victim and witness support system in Croatia. The Independent Service also coordinates the work of Victim and Witness Support Departments and develops and provides training programs and supervision for support officers and volunteers. A survey was conducted in order to determine volunteer motivation, assess the volunteers’ required qualities, their educational needs, the emotional impact arising from the work with victims and witnesses and the volunteers‘ assessment of the level of acceptance by court officials. In order to improve the level of safety of volunteers and the organization itself, the selection and educational processes for volunteers have been improved, according to both the experience achieved by working with volunteers and the results of the aforementioned survey. Engaging volunteers in the judicial system is a large step forward in the field of co-operation between the judiciary and the community.

Is carbon-supported Pt-WOx composite a CO-tolerant material?

International Nuclear Information System (INIS)

Maillard, F.; Peyrelade, E.; Soldo-Olivier, Y.; Chatenet, M.; Chainet, E.; Faure, R.

2007-01-01

Pt-WO x /C composite materials elaborated via a two-step impregnation/electrochemical reduction method have been characterized and tested for the electrooxidation of CO/H 2 mixtures. TEM and EDS measurements revealed that WO x covered imperfectly the C particles. Nanometer-sized or agglomerated Pt particles were found on the WO x /C surface. XRD measurements revealed the absence of diffraction peaks characteristic of crystalline WO x and could indicate that this material is amorphous. No evidence of alloying between the Pt and W was observed. A significant improvement toward the electrooxidation of a CO ads monolayer was observed for the composite material compared to pure Pt/C electrocatalyst, which is evidenced by a new electrooxidation peak at 0.55V versus RHE (v=0.02Vs -1 ). As the electrical charge below this electrooxidation peak is sweep rate dependant, it is probably associated to the electrooxidation of CO ads on Pt sites at the interface with the WO x /C support. The performance of the Pt-WO x /C material for the electrooxidation of CO/H 2 mixtures was tested by polarization curves under steady-state conditions (0.001Vs -1 ) or potentiostatic measurements under fuel cell relevant conditions and compared with that of commercial 20wt% Pt/C and Pt-Ru/C materials

Data Collection Handbook to Support Modeling Impacts of Radioactive Material in Soil and Building Structures

Energy Technology Data Exchange (ETDEWEB)

Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Cheng [Argonne National Lab. (ANL), Argonne, IL (United States); Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-01

This handbook is an update of the 1993 version of the Data Collection Handbook and the Radionuclide Transfer Factors Report to support modeling the impact of radioactive material in soil. Many new parameters have been added to the RESRAD Family of Codes, and new measurement methodologies are available. A detailed review of available parameter databases was conducted in preparation of this new handbook. This handbook is a companion document to the user manuals when using the RESRAD (onsite) and RESRAD-OFFSITE code. It can also be used for RESRAD-BUILD code because some of the building-related parameters are included in this handbook. The RESRAD (onsite) has been developed for implementing U.S. Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), crops and livestock, human intake, source characteristic, and building characteristic parameters are used in the RESRAD (onsite) code. The RESRAD-OFFSITE code is an extension of the RESRAD (onsite) code and can also model the transport of radionuclides to locations outside the footprint of the primary contamination. This handbook discusses parameter definitions, typical ranges, variations, and measurement methodologies. It also provides references for sources of additional information. Although this handbook was developed primarily to support the application of RESRAD Family of Codes, the discussions and values are valid for use of other pathway analysis models and codes.

Changing access to mental health care and social support when people living with HIV/AIDS become service providers.

Science.gov (United States)

Li, Alan Tai-Wai; Wales, Joshua; Wong, Josephine Pui-Hing; Owino, Maureen; Perreault, Yvette; Miao, Andrew; Maseko, Precious; Guiang, Charlie

2015-01-01

As people living with HIV/AIDS (PHAs) achieve more stable health, many have taken on active peer support and professional roles within AIDS service organizations. Although the increased engagement has been associated with many improved health outcomes, emerging program and research evidence have identified new challenges associated with such transition. This paper reports on the results of a qualitative interpretive study that explored the effect of this role transition on PHA service providers' access to mental health support and self care. A total of 27 PHA service providers of diverse ethno-racial backgrounds took part in the study. Results show that while role transition often improves access to financial and health-care benefits, it also leads to new stress from workload demands, emotional triggers from client's narratives, feeling of burnout from over-immersion in HIV at both personal and professional levels, and diminished self care. Barriers to seeking support included: concerns regarding confidentiality; self-imposed and enacted stigma associated with accessing mental health services; and boundary issues resulting from changes in relationships with peers and other service providers. Evolving support mechanisms included: new formal and informal peer support networks amongst colleagues or other PHA service providers to address both personal and professional challenges, and having access to professional support offered through the workplace. The findings suggest the need for increased organizational recognition of HIV support work as a form of emotional labor that places complex demands on PHA service providers. Increased access to employer-provided mental health services, supportive workplace policies, and adequate job-specific training will contribute to reduced work-related stress. Community level strategies that support expansion of social networks amongst PHA service providers would reduce isolation. Systemic policies to increase access to insurance

Physicists purchase materials testing machine in support of pioneering particle physics experiments

CERN Multimedia

Sharpe, Suzanne

2007-01-01

"The particle physics group at Liverpool University has purchased an LRXPlus singlecolumn materials testing machine from Lloyd Instruments, which will be used to help characterise the carbon-fibre support frames for detectors used for state-of-the-art particle physics experiments." (1 page)

Training Veterans to Provide Peer Support in a Weight-Management Program: MOVE!

Science.gov (United States)

Haynes-Maslow, Lindsey; Carr, Carol; Orr, Melinda; Kahwati, Leila C.; Weiner, Bryan J.; Kinsinger, Linda

2013-01-01

Introduction The Veterans Health Administration (VHA) has implemented MOVE!, a weight-management program for veterans designed to address the increasing proportion of overweight and obese veterans. The objective of our study was to determine whether peer support employing motivational interviewing (MI) could positively influence lifestyle changes, thus expanding the reach of the MOVE! program. We describe the initial evaluation of the peer training program. Methods We developed an MI peer counselor training program for volunteer veterans, the “Buddies” program, to provide one-on-one telephone support for veterans enrolled in MOVE!. Buddies were recruited at 5 VHA sites and trained to provide peer support for the 6-month MOVE! intervention. We used a DVD to teach MI skills and followed with 2 to 3 booster sessions. We observed training, conducted pre- and posttraining surveys, and debriefed focus groups to assess training feasibility. Results Fifty-six Buddies were trained. Results indicate positive receipt of the program (89% reported learning about peer counseling and 87% reported learning communication skills). Buddies showed a small improvement in MI self-efficacy on posttraining surveys. We also identified key challenges to learning MI and training implementation. Conclusions MI training is feasible to implement and acceptable to volunteer Buddies. Trainers must assess how effectively volunteers learn MI skills in order to enhance its effective use in health promotion. PMID:24199738

Caregiver Café: Providing Education and Support to Family Caregivers of Patients With Cancer
.

Science.gov (United States)

Finley, Joanne P

2018-02-01

The many burdens faced by caregivers of patients with cancer are well documented. Caregivers are asked to perform procedures, make assessments, coordinate care, and communicate with healthcare providers at an increasingly complex level. A caregiver quality improvement project, in the form of a Caregiver Café, was instituted at a National Cancer Institute-designated comprehensive cancer center.
. The objectives of the café are to (a) provide respite and a place for caregivers to relax and be nurtured, (b) provide a place for caregivers to meet and support each other, (c) provide answers to caregiver questions, and (d) recommend appropriate caregiver resources.
. The weekly Caregiver Café is led by an advanced practice nurse, and the format varies depending on the needs of the caregivers who attend.
. Caregivers have verbalized the importance of the café in helping them cope with their loved ones' cancers and treatments, and many attend on a regular basis. The Caregiver Café provides support and information and a place to get away from it all.

A qualitative exploration of psychosocial specialists' experiences of providing support in UK burn care services.

Science.gov (United States)

Guest, Ella; Griffiths, Catrin; Harcourt, Diana

2018-01-01

A burn can have a significant and long-lasting psychosocial impact on a patient and their family. The National Burn Care Standards (2013) recommend psychosocial support should be available in all UK burn services; however, little is known about how it is provided. The current study aimed to explore experiences of psychosocial specialists working in UK burn care, with a focus on the challenges they experience in their role. Semi-structured telephone interviews with eight psychosocial specialists (two psychotherapists and six clinical psychologists) who worked within UK burn care explored their experiences of providing support to patients and their families. Thematic analysis revealed two main themes: burn service-related experiences and challenges reflected health professionals having little time and resources to support all patients; reduced patient attendance due to them living large distances from service; psychosocial appointments being prioritised below wound-related treatments; and difficulties detecting patient needs with current outcome measures. Therapy-related experiences and challenges outlined the sociocultural and familial factors affecting engagement with support, difficulties treating patients with pre-existing mental health conditions within the burn service and individual differences in the stage at which patients are amenable to support. Findings provide an insight into the experiences of psychosocial specialists working in UK burn care and suggest a number of ways in which psychosocial provision in the NHS burn service could be developed.

Effectiveness of the use of question-driven levels of inquiry based instruction (QD-LOIBI) assisted visual multimedia supported teaching material on enhancing scientific explanation ability senior high school students

Science.gov (United States)

Suhandi, A.; Muslim; Samsudin, A.; Hermita, N.; Supriyatman

2018-05-01

In this study, the effectiveness of the use of Question-Driven Levels of Inquiry Based Instruction (QD-LOIBI) assisted visual multimedia supported teaching materials on enhancing senior high school students scientific explanation ability has been studied. QD-LOIBI was designed by following five-levels of inquiry proposed by Wenning. Visual multimedia used in teaching materials included image (photo), virtual simulation and video phenomena. QD-LOIBI assisted teaching materials supported by visual multimedia were tried out on senior high school students at one high school in one district in West Java. A quasi-experiment method with design one experiment group (n = 31) and one control group (n = 32) were used. Experimental group were given QD-LOIBI assisted teaching material supported by visual multimedia, whereas the control group were given QD-LOIBI assisted teaching materials not supported visual multimedia. Data on the ability of scientific explanation in both groups were collected by scientific explanation ability test in essay form concerning kinetic gas theory concept. The results showed that the number of students in the experimental class that has increased the category and quality of scientific explanation is greater than in the control class. These results indicate that the use of multimedia supported instructional materials developed for implementation of QD-LOIBI can improve students’ ability to provide explanations supported by scientific evidence gained from practicum activities and applicable concepts, laws, principles or theories.

An Intelligent Virtual Human System For Providing Healthcare Information And Support

Science.gov (United States)

2011-01-01

healthcare system, and also to other SMs and Veterans by way of a variety of social networking tools (e.g., 2nd Life, Facebook, etc.). The user can progress... CyberPsychology and Behavior 8, 3 (2005), 187-211. [2] T. Parsons & A.A. Rizzo, Affective Outcomes of Virtual Reality Exposure Therapy for Anxiety...VH System for Providing Healthcare Information and Support508 [4] G. Riva, Virtual Reality in Psychotherapy: Review, CyberPsychology and Behavior 8

A systematic analysis of online marketing materials used by providers of expanded carrier screening.

Science.gov (United States)

Chokoshvili, Davit; Borry, Pascal; Vears, Danya F

2017-12-14

PurposeExpanded carrier screening (ECS) for a large number of recessive disorders is available to prospective parents through commercial providers. This study aimed to analyze the content of marketing materials on ECS providers' websites.MethodsTo identify providers of ECS tests, we undertook a comprehensive online search, reviewed recent academic literature on commercial carrier screening, and consulted with colleagues familiar with the current ECS landscape. The identified websites were archived in April 2017, and inductive content analysis was performed on website text, brochures and educational materials, and video transcripts.ResultsWe identified 18 ECS providers, including 16 commercial genetic testing companies. Providers typically described ECS as an important family planning tool. The content differed in both the tone used to promote ECS and the accuracy and completeness of the test information provided. We found that most providers offered complimentary genetic counseling to their consumers, although this was often optional, limited to the posttest context, and, in some cases, appeared to be available only to test-positive individuals.ConclusionThe quality of ECS providers' websites could be improved by offering more complete and accurate information about ECS and their tests. Providers should also ensure that all carrier couples receive posttest genetic counseling to inform their subsequent reproductive decision making.Genet Med advance online publication, 14 December 2017; doi:10.1038/gim.2017.222.

Material report in support to RCC-MRX code 2010 stainless steel parts and products

International Nuclear Information System (INIS)

Ancelet, Olivier; Lebarbe, Thierry; Dubiez-Le Goff, Sophie; Bonne, Dominique; Gelineau, Odile

2012-01-01

This paper presents the Material Report dedicated to stainless steels parts and products issued by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-Nucleaires) in support to RCC-MRx 2010 Code. The RCC-MRx Code is the result of the merger of the RCC-MX 2008, developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007, which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER (a presentation of RCC-MRx 2010 Code is the subject of another paper proposed in this Congress; it explains in particular the status of this Code). This Material Report is part of a set of Criteria of RCC-MRx (this set of Criteria is under construction). The Criteria aim at explaining the design and construction rules of the Code. They cover analyses rules as well as part procurement, welding, methods of tests and examination and fabrication rules. The Material Report particularly provides justifications and explanations on requirements and features dealing with parts and products proposed in the Code. The Material Report contains the following information: Introduction of the grade(s): codes and standards and Reference Procurement Specifications covering parts and products, applications and experience gained, - Physical properties, - Mechanical properties used for design calculations (base metal and welds): basic mechanical properties, creep mechanical properties, irradiated mechanical properties, - Fabrication: experience gained, metallurgy, - Welding: weldability, experience gained during welding and repair procedure qualifications, - Non-destructive examination, - In-service behaviour. In the article, examples of data supplied in the Material Report dedicated to stainless steels will be exposed. (authors)

Mesoporous TiO2 : an alternative material for PEM fuel cells catalyst support

Energy Technology Data Exchange (ETDEWEB)

Do, T.B. [Michigan Univ., Ann Arbor, MI (United States). Dept. of Materials Science; Ruthkosky, M.; Cai, M. [General Motors, Warren, MI (United States). Research and Development Center

2008-07-01

This paper discussed the feasibility of using an alternative catalyst support material to replace carbon in proton exchange membrane (PEM) fuel cells. The alternative catalyst support material requires a high surface area with a large porosity but must have comparable conductivity with carbon. A mesoporous titanium oxide (TiO2) material produced by coprecipitation was introduced. The conductivity of the material is about one order of that of carbon. The 8 mole per cent Nb-doped TiO2 was formed and deposited on the surface of a nano polystyrene (PS) template via the hydrolysis of a co-solution of Ti(OC4H9)4 and Nb(OC2H5)5. The removal of PS by heat treatment produced porous structure of TiO2 with the appearance of 3 different pore types, notably open pore, ink-pot pores and closed pores. TiO2 formed from the rutile phase, allowing a lower activation temperature at 850 degrees C in a hydrogen atmosphere. The pore structures were retained after this heat treatment. The BET surface area was 116 m{sup 2}/g, porosity was 22 per cent and the average pore size was 159 angstrom. The conductivity improved considerably from almost non-conductive to one order of that of carbon.

Advanced energy materials

CERN Document Server

Tiwari, Ashutosh

2014-01-01

An essential resource for scientists designing new energy materials for the vast landscape of solar energy conversion as well as materials processing and characterization Based on the new and fundamental research on novel energy materials with tailor-made photonic properties, the role of materials engineering has been to provide much needed support in the development of photovoltaic devices. Advanced Energy Materials offers a unique, state-of-the-art look at the new world of novel energy materials science, shedding light on the subject's vast multi-disciplinary approach The book focuses p

Dispositions Supporting Elementary Interns in the Teaching of Reform-Based Science Materials

Science.gov (United States)

Eick, Charles J.; Stewart, Bethany

2010-01-01

Dispositions supporting the teaching of science as structured inquiry by four elementary candidates are presented. Candidates were studied during student teaching based on their positive attitudes toward teaching science with reform-based materials in their methods course. Personal learning histories informed their attitudes, values, and beliefs…

Investigating Teacher Learning Supports in High School Biology Curricular Programs to Inform the Design of Educative Curriculum Materials

Science.gov (United States)

Beyer, Carrie J.; Delgado, Cesar; Davis, Elizabeth A.; Krajcik, Joseph

2009-01-01

Reform efforts have emphasized the need to support teachers' learning about reform-oriented practices. Educative curriculum materials are one potential vehicle for promoting teacher learning about these practices. Educative curriculum materials include supports that are intended to promote both student "and" teacher learning. However, little is…

Planning and support materials in teaching story comprehension from the interbehavioral approach

Directory of Open Access Journals (Sweden)

Ana Cristina Mascareño Bórquez

2017-12-01

Full Text Available Despite the latest changes in educational reforms within the country, curriculum plans and ongoing program renewals aimed at resolving the educational gap reflected in national statistics, the results remain unfavorable. This leads to reflection and analysis to generate and implement new forms and teaching strategies. The purpose of this paper is to present the design of an alternative proposal for planning and the development of support materials, developed according to the second block of sixth grade primary education, in two expected learning contained in the formal basic education curriculum. Centered on the interaction in teaching-learning and according to different levels of functional aptitude. Subsequently it underwent a process of piloting and revision by experts to prove the pertinence of the planning and precisions for its implementation. As results, the support materials and the planning proposal are presented and discussed with the authors who have worked on planning proposals from the inter-behavioral approach.

Data collection handbook to support modeling the impacts of radioactive material in soil

International Nuclear Information System (INIS)

Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E.; Loureiro, C.; Chia, Y.P.

1993-04-01

A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications

Data collection handbook to support modeling the impacts of radioactive material in soil

Energy Technology Data Exchange (ETDEWEB)

Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.; Loureiro, C. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Escola de Engenharia; Chia, Y.P. [National Taiwan Univ., Taipei (Taiwan, Province of China). Dept. of Geology

1993-04-01

A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications.

Readability of Educational Materials to Support Parent Sexual Communication With Their Children and Adolescents.

Science.gov (United States)

Ballonoff Suleiman, Ahna; Lin, Jessica S; Constantine, Norman A

2016-05-01

Sexual communication is a principal means of transmitting sexual values, expectations, and knowledge from parents to their children and adolescents. Many parents seek information and guidance to support talking with their children about sex and sexuality. Parent education materials can deliver this guidance but must use appropriate readability levels to facilitate comprehension and motivation. This study appraised the readability of educational materials to support parent sexual communication with their children. Fifty brochures, pamphlets, and booklets were analyzed using the Flesch-Kincaid, Gunning Fog, and Simple Measure of Gobbledygook (SMOG) index methods. Mean readability grade-level scores were 8.3 (range = 4.5-12.8), 9.7 (range = 5.5-14.9), and 10.1 (range = 6.7-13.9), respectively. Informed by National Institutes of Health-recommended 6th to 7th grade levels and American Medical Association-recommended 5th to 6th grade levels, percentages falling at or below the 7.0 grade level were calculated as 38%, 12%, and 2% and those falling at or below the 6.0 grade level were calculated as 12%, 2%, and 0% based on the Flesch-Kincaid, Gunning Fog, and SMOG methods, respectively. These analyses indicate that the majority of educational materials available online to support parents' communication with their children about sex and sexuality do not meet the needs of many or most parents. Efforts to improve the accessibility of these materials are warranted.

BIM-Based Decision Support System for Material Selection Based on Supplier Rating

Directory of Open Access Journals (Sweden)

Abiola Akanmu

2015-12-01

Full Text Available Material selection is a delicate process, typically hinged on a number of factors which can be either cost or environmental related. This process becomes more complicated when designers are faced with several material options of building elements and each option can be supplied by different suppliers whose selection criteria may affect the budgetary and environmental requirements of the project. This paper presents the development of a decision support system based on the integration of building information models, a modified harmony search algorithm and supplier performance rating. The system is capable of producing the cost and environmental implications of different material combinations or building designs. A case study is presented to illustrate the functionality of the developed system.

Providing supportive care to cancer patients: a study on inter-organizational relationships

Directory of Open Access Journals (Sweden)

Kevin Brazil

2008-02-01

Full Text Available Background: Supportive cancer care (SCC has historically been provided by organizations that work independently and possess limited inter-organizational coordination. Despite the recognition that SCC services must be better coordinated, little research has been done to examine inter-organizational relationships that would enable this goal. Objective: The purpose of this study was to describe relationships among programs that support those affected by cancer. Through this description the study objective was to identify the optimal approach to coordinating SCC in the community. Methods: Senior administrators in programs that provided care to persons and their families living with or affected by cancer participated in a personal interview. Setting: South-central Ontario, Canada. Study population: administrators from 43 (97% eligible programs consented to participate in the study. Results: Network analysis revealed a diffuse system where centralization was greater in operational than administrative activities. A greater number of provider cliques were present at the operational level than the administrative level. Respondents identified several priorities to improve the coordination of cancer care in the community including: improving standards of care; establishing a regional coordinating body; increasing resources; and improving communication between programs. Conclusion: Our results point to the importance of developing a better understanding on the types of relationships that exist among service programs if effective integrated models of care are to be developed.

Characterization of cement-based ancient building materials in support of repository seal materials studies

International Nuclear Information System (INIS)

Roy, D.M.; Langton, C.A.

1983-12-01

Ancient mortars and plasters collected from Greek and Cypriot structures dating to about 5500 BC have been investigated because of their remarkable durability. The characteristics and performance of these and other ancient cementitious materials have been considered in the light of providing information on longevity of concrete materials for sealing nuclear waste geological repositories. The matrices of these composite materials have been characterized and classified into four categories: (1) gypsum cements; (2) hydraulic hydrated lime and hydrated-lime cements; (3) hydraulic aluminous and ferruginous hydrated-lime cements (+- siliceous components); and (4) pozzolana/hydrated-lime cements. Most of the materials investigated, including linings of ore-washing basins and cisterns used to hold water, are in categories (2) and (3). The aggregates used included carbonates, sandstones, shales, schists, volcanic and pyroclastic rocks, and ore minerals, many of which represent host rock types of stratigraphic components of a salt repository. Numerous methods were used to characterize the materials chemically, mineralogically, and microstructurally and to elucidate aspects of both the technology that produced them and their response to the environmental exposure throughout their centuries of existence. Their remarkable properties are the result of a combination of chemical (mineralogical) and microstructural factors. Durability was found to be affected by matrix mineralogy, particle size and porosity, and aggregate type, grading, and proportioning, as well as method of placement and exposure conditions. Similar factors govern the potential for durability of modern portland cement-containing materials, which are candidates for repository sealing. 29 references, 29 figures, 6 tables

Diabetes self-management support for patients with low health literacy: Perceptions of patients and providers

NARCIS (Netherlands)

Fransen, Mirjam P.; Beune, Erik J. A. J.; Baim-Lance, Abigail M.; Bruessing, Raynold C.; Essink-Bot, Marie-Louise

2015-01-01

The aim of the present study was to explore perceptions and strategies of health care providers regarding diabetes self-management support for patients with low health literacy (LHL), and to compare their self-management support with the needs of patients with LHL and type 2 diabetes. This study

You can't always give what you want: the challenge of providing social support to low self-esteem individuals.

Science.gov (United States)

Marigold, Denise C; Cavallo, Justin V; Holmes, John G; Wood, Joanne V

2014-07-01

It can be challenging for support providers to facilitate effective social support interactions even when they have the best intentions. In the current article, we examine some reasons for this difficulty, with a focus on support recipients' self-esteem as a crucial variable. We predicted that recipients' receptiveness to support would be influenced by both support strategy and recipient self-esteem and that receptiveness in turn would impact providers' perceived caregiving efficacy and relationship quality. Study 1 (hypothetical scenarios), Study 2 (confederate interaction), and Study 3 (reports of recently received support) showed that individuals with low self-esteem (LSEs) are less receptive than are individuals with high self-esteem (HSEs) to support that positively reframes their experience but are equally receptive to support that validates their negative feelings. In Study 4, providers demonstrated some knowledge that positive reframing would be less helpful to LSEs than to HSEs but indicated equal intention to give such support. Study 5 showed that, in a real interaction, friends were indeed equally likely to offer positive reframing to both LSEs and HSEs but were less likely to offer validation to LSEs. LSEs were less accepting of such support, and in turn providers felt worse about the interaction, about themselves, and about their friendship more broadly. Study 6 confirmed that recipients' receptivity to support directly influenced providers' experience of a support interaction as well as their self- and relationship evaluations. The findings illustrate how well-meaning support attempts that do not match recipients' particular preferences may be detrimental to both members of the dyad.

Cobalt nanosheet arrays supported silicon film as anode materials for lithium ion batteries

International Nuclear Information System (INIS)

Huang, X.H.; Wu, J.B.; Cao, Y.Q.; Zhang, P.; Lin, Y.; Guo, R.Q.

2016-01-01

Cobalt nanosheet arrays supported silicon film is prepared and used as anode materials for lithium ion batteries. The film is fabricated using chemical bath deposition, hydrogen reduction and radio-frequency magnetron sputtering techniques. The microstructure and morphology are characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). In this composite film, the silicon layer is supported by interconnected aligned cobalt nanosheet arrays that act as the three-dimensional current collector and buffering network. The electrochemical performance as anode materials for lithium ion batteries is investigated by cyclic voltammetry (CV) and galvanostatic charge-discharge tests. The results show that the film prepared by sputtering for 1500 s exhibits high capacity, good rate capability and stable cycle ability. It is believed that the cobalt nanosheet arrays play important roles in the electrochemical performance of the silicon layer.

45 CFR 287.125 - What supportive and job retention services may be provided under the NEW Program?

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What supportive and job retention services may be provided under the NEW Program? 287.125 Section 287.125 Public Welfare Regulations Relating to Public... Operations § 287.125 What supportive and job retention services may be provided under the NEW Program? The...

Chemistry and materials science progress report. Weapons-supporting research and laboratory directed research and development: FY 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

This report covers different materials and chemistry research projects carried out a Lawrence Livermore National Laboratory during 1995 in support of nuclear weapons programs and other programs. There are 16 papers supporting weapons research and 12 papers supporting laboratory directed research.

Chemistry and materials science progress report. Weapons-supporting research and laboratory directed research and development: FY 1995

International Nuclear Information System (INIS)

1996-04-01

This report covers different materials and chemistry research projects carried out a Lawrence Livermore National Laboratory during 1995 in support of nuclear weapons programs and other programs. There are 16 papers supporting weapons research and 12 papers supporting laboratory directed research

FY17 Status Report on Testing Supporting the Inclusion of Grade 91 Steel as an Acceptable Material for Application of the EPP Methodology

Energy Technology Data Exchange (ETDEWEB)

Messner, Mark C. [Argonne National Lab. (ANL), Argonne, IL (United States); Sham, Sam [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Yanli [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

This report summarizes the experiments performed in FY17 on Gr. 91 steels. The testing of Gr. 91 has technical significance because, currently, it is the only approved material for Class A construction that is strongly cyclic softening. Specific FY17 testing includes the following activities for Gr. 91 steel. First, two types of key feature testing have been initiated, including two-bar thermal ratcheting and Simplified Model Testing (SMT). The goal is to qualify the Elastic – Perfectly Plastic (EPP) design methodologies and to support incorporation of these rules for Gr. 91 into the ASME Division 5 Code. The preliminary SMT test results show that Gr. 91 is most damaging when tested with compression hold mode under the SMT creep fatigue testing condition. Two-bar thermal ratcheting test results at a temperature range between 350 to 650o C were compared with the EPP strain limits code case evaluation, and the results show that the EPP strain limits code case is conservative. The material information obtained from these key feature tests can also be used to verify its material model. Second, to provide experimental data in support of the viscoplastic material model development at Argonne National Laboratory, selective tests were performed to evaluate the effect of cyclic softening on strain rate sensitivity and creep rates. The results show the prior cyclic loading history decreases the strain rate sensitivity and increases creep rates. In addition, isothermal cyclic stress-strain curves were generated at six different temperatures, and a nonisothermal thermomechanical testing was also performed to provide data to calibrate the viscoplastic material model.

Fusion Materials Irradiation Test Facility: a facility for fusion-materials qualification

International Nuclear Information System (INIS)

Trego, A.L.; Hagan, J.W.; Opperman, E.K.; Burke, R.J.

1983-01-01

The Fusion Materials Irradiation Test Facility will provide a unique testing environment for irradiation of structural and special purpose materials in support of fusion power systems. The neutron source will be produced by a deuteron-lithium stripping reaction to generate high energy neutrons to ensure damage similar to that of a deuterium-tritium neutron spectrum. The facility design is now ready for the start of construction and much of the supporting lithium system research has been completed. Major testing of key low energy end components of the accelerator is about to commence. The facility, its testing role, and the status and major aspects of its design and supporting system development are described

Cryogenic structural material and design of support structures for the Large Helical Device

International Nuclear Information System (INIS)

Nishimura, Arata; Imagawa, Shinsaku; Tamura, Hitoshi

1997-01-01

This paper describes a short history of material selection for the cryogenic support structures for the Large Helical Device (LHD) which has superconducting coils. Since the support structures are cooled down to 4.4 K together with the coils, SUS 316 was chosen because of its stable austenitic phase, sufficient mechanical properties at cryogenic temperature and good weldability. Also, outlines of the design and fabrication processes of the support structures are summarized. On the design of the support structures, a deformation analysis was carried out to maintain the proper magnetic field during operation. Afterwards, a stress analysis was performed. During machining and assembling, tolerance was noticed to keep coil positions accurate. Special welding grooves and fabrication processes were considered and achieved successfully. Finally, a cryogenic supporting post which sustains the cryogenic structures and superconducting coils is presented. CFRP was used in this specially developed supporting post to reduce the heat conduction from ambient 300 K structures. (author)

Social support, self-rated health, and lesbian, gay, bisexual, and transgender identity disclosure to cancer care providers.

Science.gov (United States)

Kamen, Charles S; Smith-Stoner, Marilyn; Heckler, Charles E; Flannery, Marie; Margolies, Liz

2015-01-01

To describe factors related to diagnosis, identity disclosure, and social support among lesbian, gay, bisexual, and transgender (LGBT) patients with cancer, and to explore associations between these factors and self-rated health. Cross-sectional self-report survey design using descriptive and exploratory multivariate statistical approaches. Online, Internet-based. 291 LGBT patients (89% Caucasian; 50% gay, 36% lesbian, 7% bisexual, 3% transgender) with mixed cancers. Participants completed a researcher-designed online survey assessing experiences of cancer diagnosis among LGBT patients at a single time point. Demographics, which provider(s) delivered the patients' cancer diagnoses, to whom patients had disclosed their LGBT identity, how they disclosed, who was on their social support team at the time of diagnosis, and current self-rated health. 79% of participants reported disclosing their identities to more than one cancer care provider. Participants most commonly introduced the topic of LGBT identity themselves, sometimes as a way to correct heterosexual assumptions (34%). Friends were the most common members of LGBT patients' support teams (79%). Four disclosure and support factors were consistently associated with better self-rated health. Disclosure of LGBT identity is a common experience in the context of cancer care, and disclosure and support factors are associated with better self-reported health among LGBT patients. Creating safe environments for LGBT patients to disclose could improve cancer care delivery to this underserved population. Nurses and other providers should acknowledge and include diverse support team members in LGBT patients' care.

The role of the American Society for Testing and Materials (ASTM) in providing standards to support reliability technology for nuclear power plants

International Nuclear Information System (INIS)

Steele, L.E.

1978-01-01

ASTM is an international society for managing the development of standards on characteristics and performance of materials, products, systems and services and the promotion of related knowledge. This paper provides on overview of ASTM, emphasizing its contribution to nuclear systems reliability. In so doing, the author, from his perspective as chairman of ASTM committee E 10 on ''Nuclear Applications and the Measurement of Radiation Effects and the Committee on Standards'', illustrates ASTM contributions to the understanding and control of radiation embrittlement of light-water reactor pressure vessels. Four major related taks are summarized and pertinent standards identified. These include: (1) surveillance practice (5 standards), (2) neutron dosimetry (8 standards), (3) specification for steels for nuclear service (7 standards) and (4) basic guidelines for thermal annealing to correct radiation embrittlement (1 standard). This illustration, a specific accomplishment using ASTM standards, is cited within the context of the broader nuclear-related activities of ASTM. (author)

Plant Materials are Sustainable Substrates Supporting New Technologies of Plant-Only-Based Culture Media for in vitro Culturing of the Plant Microbiota.

Science.gov (United States)

Mourad, Elhussein F; Sarhan, Mohamed S; Daanaa, Hassan-Sibroe A; Abdou, Mennatullah; Morsi, Ahmed T; Abdelfadeel, Mohamed R; Elsawey, Hend; Nemr, Rahma; El-Tahan, Mahmoud; Hamza, Mervat A; Abbas, Mohamed; Youssef, Hanan H; Abdelhadi, Abdelhadi A; Amer, Wafaa M; Fayez, Mohamed; Ruppel, Silke; Hegazi, Nabil A

2018-03-29

In order to improve the culturability and biomass production of rhizobacteria, we previously introduced plant-only-based culture media. We herein attempted to widen the scope of plant materials suitable for the preparation of plant-only-based culture media. We chemically analyzed the refuse of turfgrass, cactus, and clover. They were sufficiently rich to support good in vitro growth by rhizobacteria isolates representing Proteobacteria and Firmicutes. They were also adequate and efficient to produce a cell biomass in liquid batch cultures. These culture media were as sufficient as artificial culture media for the cultivation and recovery of the in situ rhizobacteria of barley (Hordeum murinum L.). Based on culture-dependent (CFU plate counting) and culture-independent analyses (qPCR), mowed turfgrass, in particular, supported the highest culturable population of barley endophytes, representing >16% of the total bacterial number quantified with qPCR. This accurately reflected the endophytic community composition, in terms of diversity indices (S', H', and D') based on PCR-DGGE, and clustered the plant culture media together with the qPCR root populations away from the artificial culture media. Despite the promiscuous nature of the plant materials tested to culture the plant microbiome, our results indicated that plant materials of a homologous nature to the tested host plant, at least at the family level, and/or of the same environment were more likely to be selected. Plant-only-based culture media require further refinements in order to provide selectivity for the in vitro growth of members of the plant microbiome, particularly difficult-to-culture bacteria. This will provide insights into their hidden roles in the environment and support future culturomic studies.

Directory of Indochinese Health Education Materials for Southeast Asian Refugees, Refugee Sponsors and Refugee Health Providers.

Science.gov (United States)

Minnesota State Dept. of Health, St. Paul. Refugee Education Resource Center.

This is a directory of (print) health education materials for Indochinese refugees, refugee sponsors, and refugee health providers. Materials listed for refugees cover dental health, diseases, family planning, infant and child health, maternal care and pregnancy, legal systems, nutrition, patient instruction, and education. The directory also…

Supportive Accountability: A model for providing human support for internet and ehealth interventions

NARCIS (Netherlands)

Mohr, D.C.; Cuijpers, P.; Lehman, K.A.

2011-01-01

The effectiveness of and adherence to eHealth interventions is enhanced by human support. However, human support has largely not been manualized and has usually not been guided by clear models. The objective of this paper is to develop a clear theoretical model, based on relevant empirical

An Ontology to Support the Classification of Learning Material in an Organizational Learning Environment: An Evaluation

Science.gov (United States)

Valaski, Joselaine; Reinehr, Sheila; Malucelli, Andreia

2017-01-01

Purpose: The purpose of this research was to evaluate whether ontology integrated in an organizational learning environment may support the automatic learning material classification in a specific knowledge area. Design/methodology/approach: An ontology for recommending learning material was integrated in the organizational learning environment…

Film of lignocellulosic carbon material for self-supporting electrodes in electric double-layer capacitors

Directory of Open Access Journals (Sweden)

Tsubasa Funabashi

2013-09-01

Full Text Available A novel thin, wood-based carbon material with heterogeneous pores, film of lignocellulosic carbon material (FLCM, was successfully fabricated by carbonizing softwood samples of Picea jezoensis (Jezo spruce. Simultaneous increase in the specific surface area of FLCM and its affinity for electrolyte solvents in an electric double-layer capacitor (EDLC were achieved by the vacuum ultraviolet/ozone (VUV/O3 treatment. This treatment increased the specific surface area of FLCM by 50% over that of original FLCM. The results obtained in this study confirmed that FLCM is an appropriate self-supporting EDLC electrode material without any warps and cracks.

Support Operators Method for the Diffusion Equation in Multiple Materials

Energy Technology Data Exchange (ETDEWEB)

Winters, Andrew R. [Los Alamos National Laboratory; Shashkov, Mikhail J. [Los Alamos National Laboratory

2012-08-14

A second-order finite difference scheme for the solution of the diffusion equation on non-uniform meshes is implemented. The method allows the heat conductivity to be discontinuous. The algorithm is formulated on a one dimensional mesh and is derived using the support operators method. A key component of the derivation is that the discrete analog of the flux operator is constructed to be the negative adjoint of the discrete divergence, in an inner product that is a discrete analog of the continuum inner product. The resultant discrete operators in the fully discretized diffusion equation are symmetric and positive definite. The algorithm is generalized to operate on meshes with cells which have mixed material properties. A mechanism to recover intermediate temperature values in mixed cells using a limited linear reconstruction is introduced. The implementation of the algorithm is verified and the linear reconstruction mechanism is compared to previous results for obtaining new material temperatures.

Assessment of rock wool as support material for on-site sanitation: hydrodynamic and mechanical characterization.

Science.gov (United States)

Wanko, Adrien; Laurent, Julien; Bois, Paul; Mosé, Robert; Wagner-Kocher, Christiane; Bahlouli, Nadia; Tiffay, Serge; Braun, Bouke; Provo kluit, Pieter-Willem

2016-01-01

This study proposes mechanical and hydrodynamic characterization of rock wool used as support material in compact filter. A double-pronged approach, based on experimental simulation of various physical states of this material was done. First of all a scanning electron microscopy observation allows to highlight the fibrous network structure, the fibres sizing distribution and the atomic absorption spectrum. The material was essentially lacunar with 97 ± 2% of void space. Static compression tests on variably saturated rock wool samples provide the fact that the strain/stress behaviours depend on both the sample conditioning and the saturation level. Results showed that water exerts plastifying effect on mechanical behaviour of rock wool. The load-displacement curves and drainage evolution under different water saturation levels allowed exhibiting hydraulic retention capacities under stress. Finally, several tracer experiments on rock wool column considering continuous and batch feeding flow regime allowed: (i) to determine the flow model for each test case and the implications for water dynamic in rock wool medium, (ii) to assess the rock wool double porosity and discuss its advantages for wastewater treatment, (iii) to analyse the benefits effect for water treatment when the high level of rock wool hydric retention was associated with the plug-flow effect, and (iv) to discuss the practical contributions for compact filter conception and management.

Dental School Administrators' Attitudes Towards Providing Support Services for LGBT-Identified Students.

Science.gov (United States)

Behar-Horenstein, Linda S; Morris, Dustin R

2015-08-01

A lack of curriculum time devoted to teaching dental students about the needs of lesbian, gay, bisexual, and transgendered (LGBT) health care patient needs and biases against LGBT students and faculty have been reported. Understanding dental school administrators' attitudes about LGBT students' needs might provide further insight into these long-standing issues. The aims of this study were to develop a survey to assess dental administrators' attitudes regarding the support services they believe LGBT-identified students need, to identify dental schools' current diversity inclusion policies, and to determine what types of support dental schools currently provide to LGBT students. A survey developed with the aid of a focus group, cognitive interviewing, and pilot testing was sent to 136 assistant and associate deans and deans of the 65 U.S. and Canadian dental schools. A total of 54 responses from 43 (66%) schools were received from 13 deans, 29 associate deans, and 11 assistant deans (one participant did not report a position), for a 40% response rate. The findings suggest there is a considerable lack of knowledge or acknowledgment of LGBT dental students' needs. Future studies are needed to show the importance of creating awareness about meeting the needs of all dental student groups, perhaps through awareness campaigns initiated by LGBT students.

Rural health professionals' perspectives on providing grief and loss support in cancer care.

Science.gov (United States)

Breen, L J; O'Connor, M

2013-11-01

Research demonstrates considerable inequalities in service delivery and health outcomes for people with cancer living outside large metropolitan cities. Semi-structured interviews with 11 professionals providing grief and loss support for people with cancer and their families in rural, regional, and remote areas Western Australia revealed the challenges they faced in delivering such support. The data are presented in four themes - Inequity of regional versus metropolitan services, Strain of the 'Jack of all trades' role, Constraints to accessing professional development, and Challenges in delivering post-bereavement services. These challenges are likely to be of growing concern given that populations are declining in rural areas as Australia becomes increasingly urban. The findings have implications in enhancing the loss and grief support services available in rural, regional, and remote Western Australia, including those grieving the death of a loved one through cancer. © 2013 John Wiley & Sons Ltd.

Techniques and Tools Providing Strategic Decision Support: A Framework, Review, and Guidelines

Science.gov (United States)

1990-07-01

associations in a dream (Lacan, 1977). But the cognitive operations at level 5 are in themselves beyond the language or the person carrying them out (Jameson...formalizing techniques. A major problem for the design of systems able to provide support at this level is that, as in dream interpretation, what needs to...the development of object relations and affects. International Journal of Psychoanalysis , 59, 285-296. Savage, L.J., 1954. The foundations of

Providing a Full Circle of Support to Teachers in an Inclusive Elementary School

Science.gov (United States)

Waldron, Nancy L.; Redd, Lacy

2011-01-01

Providing a full circle of support to teachers in an inclusive elementary school, the Newberry Elementary School (NES) principal and staff have worked for 5 years to ensure the inclusion of students with disabilities in general education classrooms. The authors would like to share their perceptions of how this full circle (the multiple systems) of…

FY2011 Annual Progress Report for Propulsion Materials

Energy Technology Data Exchange (ETDEWEB)

Davis, Patrick B. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Schutte, Carol L. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Gibbs, Jerry L. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2011-12-01

Annual Progress Report for Propulsion Materials focusing on enabling and innovative materials technologies that are critical in improving the efficiency of advanced engines by providing enabling materials support for combustion, hybrid, and power electronics development.

SupportNet for Frontline Behavioral Health Providers

Science.gov (United States)

2012-06-01

Review of the Impact of Adherence on the Effectiveness of e-Therapies. Journal of Medical Internet Research , 13(3), 52. Frank, R. (2003, January...Improve the Uptake and Impact of eHealth Technologies. Journal of Medical Internet Research , 13(4), 111. 41 Appendix V SupportNet

Agricultural Production. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed to deal with…

Fusion reactor materials

International Nuclear Information System (INIS)

Rowcliffe, A.F.; Burn, G.L.; Knee', S.S.; Dowker, C.L.

1994-02-01

This is the fifteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; Special purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the U.S. Department of Energy. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

Language Practice with Multimedia Supported Web-Based Grammar Revision Material

Science.gov (United States)

Baturay, Meltem Huri; Daloglu, Aysegul; Yildirim, Soner

2010-01-01

The aim of this study was to investigate the perceptions of elementary-level English language learners towards web-based, multimedia-annotated grammar learning. WEBGRAM, a system designed to provide supplementary web-based grammar revision material, uses audio-visual aids to enrich the contextual presentation of grammar and allows learners to…

Challenges while Updating Planning Parameters of an ERP System and How a Simulation-Based Support System Can Support Material Planners

Directory of Open Access Journals (Sweden)

Ulrike Stumvoll

2016-01-01

Full Text Available In an Enterprise Resource Planning (ERP system, production planning is influenced by a variety of parameters. Previous investigations show that setting parameter values is highly relevant to a company’s target system. Parameter settings should be checked and adjusted, e.g., after a change in environmental factors, by material planners. In practice, updating the parameters is difficult due to several reasons. This paper presents a simulation-based decision support system, which helps material planners in all stages of decision-making processes. It will present the system prototype’s user interface and the results of applying the system to a case study.

Development and evaluation of measurement devices used to support testing of radioactive material transportation packages

International Nuclear Information System (INIS)

Uncapher, W.L.; Ammerman, D.J.; Stenberg, D.R.; Bronowski, D.R.; Arviso, M.

1992-01-01

Radioactive material package designers use structural testing to verify and demonstrate package performance. A major part of evaluating structural response is the collection of instrumentation measurement data. Sandia National Laboratories (SNL) has an ongoing program to develop and evaluate measurement devices to support testing of radioactive material packages. Measurement devices developed in support of this activity include evaluation channels, ruggedly constructed linear variable differential transformers, and piezoresistive accelerometers with enhanced measurement capabilities. In addition to developing measurement devices, a method has been derived to evaluate accelerometers and strain gages for measurement repeatability, ruggedness, and manufacturers' calibration data under both laboratory and field conditions. The developed measurement devices and evaluation technique will be discussed and the results of the evaluation will be presented

Can Patients Comprehend the Educational Materials that Hospitals Provide about Common IR Procedures?

Science.gov (United States)

Sadigh, Gelareh; Hawkins, C Matthew; O'Keefe, John J; Khan, Ramsha; Duszak, Richard

2015-08-01

To assess the readability of online education materials offered by hospitals describing commonly performed interventional radiology (IR) procedures. Online patient education materials from 402 hospitals selected from the Medicare Hospital Compare database were assessed. The presence of an IR service was determined by representation in the Society of Interventional Radiology physician finder directory. Patient online education materials about (i) uterine artery embolization for fibroid tumors, (ii) liver cancer embolization, (iii) varicose vein treatment, (iv) central venous access, (v) inferior vena cava (IVC) filter placement, (vi) nephrostomy tube insertion, (vii) gastrostomy tube placement, and (viii) vertebral augmentation were targeted and assessed by using six validated readability scoring systems. Of 402 hospitals sampled, 156 (39%) were presumed to offer IR services. Of these, 119 (76%) offered online patient education material for one or more of the eight service lines. The average readability scores corresponding to grade varied between the ninth- and 12th-grade levels. All were higher than the recommended seventh-grade level (P Reading Ease scores ranged from 42 to 69, corresponding with fairly difficult to difficult readability for all service lines except IVC filter and gastrostomy tube placement, which corresponded with standard readability. A majority of hospitals offering IR services provide at least some online patient education material. Most, however, are written significantly above the reading comprehension level of most Americans. More attention to health literacy by hospitals and IR physicians is warranted. Copyright © 2015 SIR. Published by Elsevier Inc. All rights reserved.

Routine outcome measurement in mental health service consumers: who should provide support for the self-assessments?

Science.gov (United States)

Gelkopf, Marc; Pagorek-Eshel, Shira; Trauer, Tom; Roe, David

2015-06-01

This study examined whether mental health community service users completed outcome self-reports differently when assessments were supervised by internal vs. external staff. The examination of potential differences between the two has useful implications for mental health systems that take upon themselves the challenge of Routine Outcome Measurement (ROM), as it might impact allocation of public resources and managed care program planning. 73 consumers completed the Manchester Short Assessment of Quality of Life (MANSA), a shortened version of the Recovery Assessment Scale (RAS), and a functioning questionnaire. Questionnaires were administered, once using support provided by internal staff and once using support provided by external professional staff, with a one-month time interval and in random order. A MANOVA Repeated Measures showed no differences in outcomes of quality of life and recovery between internal and external support. Functioning scores were higher for the internal support when the internal assessments were performed first. Overall, except for the differences in functioning assessment, outcome scores were not determined by the supporting agency. This might indicate that when measuring quality of life and recovery, different supporting methods can be used to gather outcome measures and internal staff might be a good default agency to do this. Differences found in functioning assessment are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Identifying the Types of Support Needed by Interprofessional Teams Providing Pediatric End-of-Life Care: A Thematic Analysis.

Science.gov (United States)

Riotte, Clare O; Kukora, Stephanie K; Keefer, Patricia M; Firn, Janice I

2018-04-01

Despite the number of interprofessional team members caring for children at the end of life, little evidence exists on how institutions can support their staff in providing care in these situations. We sought to evaluate which aspects of the hospital work environment were most helpful for multidisciplinary team members who care for patients at the end of life and identify areas for improvement to better address staff needs. Qualitative thematic analysis was completed of free-text comments from a survey distributed to interprofessional staff members involved in the care of a recently deceased pediatric patient. A total of 2701 surveys were sent; 890 completed. Free-text responses were provided by 306 interprofessional team members. Interprofessional team members involved in the care of a child who died at a 348 bed academic children's hospital in the Midwestern United States. Realist thematic analysis of free-text responses was completed in Dedoose using a deductive and inductive approach with line-by-line coding. Descriptive statistics of demographic information was completed using Excel. Thematic analysis of the 306 free-text responses identified three main support-related themes. Interprofessional team members desire to have (1) support through educational efforts such as workshops, (2) support from colleagues, and (3) support through institutional practices. Providers who participate in end-of-life work benefit from ongoing support through education, interpersonal relationships, and institutional practices. Addressing these areas from an interprofessional perspective enables staff to provide the optimal care for patients, patients' families, and themselves.

Materials Science

Science.gov (United States)

2003-01-01

The Materials Science Program is structured so that NASA s headquarters is responsible for the program content and selection, through the Enterprise Scientist, and MSFC provides for implementation of ground and flight programs with a Discipline Scientist and Discipline Manager. The Discipline Working Group of eminent scientists from outside of NASA acts in an advisory capacity and writes the Discipline Document from which the NRA content is derived. The program is reviewed approximately every three years by groups such as the Committee on Microgravity Research, the National Materials Advisory Board, and the OBPR Maximization and Prioritization (ReMaP) Task Force. The flight program has had as many as twenty-six principal investigators (PIs) in flight or flight definition stage, with the numbers of PIs in the future dependent on the results of the ReMaP Task Force and internal reviews. Each project has a NASA-appointed Project Scientist, considered a half-time job, who assists the PI in understanding and preparing for internal reviews such as the Science Concept Review and Requirements Definition Review. The Project Scientist also insures that the PI gets the maximum science support from MSFC, represents the PI to the MSFC community, and collaborates with the Project Manager to insure the project is well-supported and remains vital. Currently available flight equipment includes the Materials Science Research Rack (MSRR-1) and Microgravity Science Glovebox. Ground based projects fall into one or more of several categories. Intellectual Underpinning of Flight Program projects include theoretical studies backed by modeling and computer simulations; bring to maturity new research, often by young researchers, and may include preliminary short duration low gravity experiments in the KC-135 aircraft or drop tube; enable characterization of data sets from previous flights; and provide thermophysical property determinations to aid PIs. Radiation Shielding and preliminary In

Farm Management and Leadership. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in farm management and leadership: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with farm management. SMAT materials can…

A future vision of nuclear material information systems

International Nuclear Information System (INIS)

Suski, N.; Wimple, C.

1999-01-01

To address the current and future needs for nuclear materials management and safeguards information, Lawrence Livermore National Laboratory envisions an integrated nuclear information system that will support several functions. The vision is to link distributed information systems via a common communications infrastructure designed to address the information interdependencies between two major elements: Domestic, with information about specific nuclear materials and their properties, and International, with information pertaining to foreign nuclear materials, facility design and operations. The communication infrastructure will enable data consistency, validation and reconciliation, as well as provide a common access point and user interface for a broad range of nuclear materials information. Information may be transmitted to, from, and within the system by a variety of linkage mechanisms, including the Internet. Strict access control will be employed as well as data encryption and user authentication to provide the necessary information assurance. The system can provide a mechanism not only for data storage and retrieval, but will eventually provide the analytical tools necessary to support the U.S. government's nuclear materials management needs and non-proliferation policy goals

Survey of Technetium Analytical Production Methods Supporting Hanford Nuclear Materials Processing

International Nuclear Information System (INIS)

TROYER, G.L.

1999-01-01

This document provides a historical survey of analytical methods used for measuring 99 Tc in nuclear fuel reprocessing materials and wastes at Hanford. Method challenges including special sludge matrices tested are discussed. Special problems and recommendations are presented

Material control evaluation

International Nuclear Information System (INIS)

Waddoups, I.G.; Anspach, D.A.; Abbott, J.A.

1993-01-01

Changes in the Department of Energy's (DOE) scope of work have stimulated several laboratories and commercial companies to develop and apply technology to enhance nuclear material control. Accountability, inventory, radiation exposure, and insider protection concerns increase as many DOE facilities require increased storage. This paper summarizes a study of the existing material control technologies. The goal of the study is to identify, characterize, and quantify the trade-offs associated with using these technologies to provide real-time information on stored nuclear material that in turn supports decreasing the frequency of inventories conducted by site personnel

FY2008 Annual Progress Report for Propulsion Materials

Energy Technology Data Exchange (ETDEWEB)

none,

2009-01-01

This program focuses on enabling and innovative materials technologies that are critical in improving the efficiency of advanced engines providing enabling materials support for combustion, hybrid, and power electronics development.

Supportive Accountability: A Model for Providing Human Support to Enhance Adherence to eHealth Interventions

Science.gov (United States)

2011-01-01

The effectiveness of and adherence to eHealth interventions is enhanced by human support. However, human support has largely not been manualized and has usually not been guided by clear models. The objective of this paper is to develop a clear theoretical model, based on relevant empirical literature, that can guide research into human support components of eHealth interventions. A review of the literature revealed little relevant information from clinical sciences. Applicable literature was drawn primarily from organizational psychology, motivation theory, and computer-mediated communication (CMC) research. We have developed a model, referred to as “Supportive Accountability.” We argue that human support increases adherence through accountability to a coach who is seen as trustworthy, benevolent, and having expertise. Accountability should involve clear, process-oriented expectations that the patient is involved in determining. Reciprocity in the relationship, through which the patient derives clear benefits, should be explicit. The effect of accountability may be moderated by patient motivation. The more intrinsically motivated patients are, the less support they likely require. The process of support is also mediated by the communications medium (eg, telephone, instant messaging, email). Different communications media each have their own potential benefits and disadvantages. We discuss the specific components of accountability, motivation, and CMC medium in detail. The proposed model is a first step toward understanding how human support enhances adherence to eHealth interventions. Each component of the proposed model is a testable hypothesis. As we develop viable human support models, these should be manualized to facilitate dissemination. PMID:21393123

The effect of winding and core support material on the thermal gain dependence of a fluxgate magnetometer sensor

Science.gov (United States)

Miles, David M.; Mann, Ian R.; Kale, Andy; Milling, David K.; Narod, Barry B.; Bennest, John R.; Barona, David; Unsworth, Martyn J.

2017-10-01

Fluxgate magnetometers are an important tool in geophysics and space physics but are typically sensitive to variations in sensor temperature. Changes in instrumental gain with temperature, thermal gain dependence, are thought to be predominantly due to changes in the geometry of the wire coils that sense the magnetic field and/or provide magnetic feedback. Scientific fluxgate magnetometers typically employ some form of temperature compensation and support and constrain wire sense coils with bobbins constructed from materials such as MACOR machinable ceramic (Corning Inc.) which are selected for their ultra-low thermal deformation rather than for robustness, cost, or ease of manufacturing. We present laboratory results comparing the performance of six geometrically and electrically matched fluxgate sensors in which the material used to support the windings and for the base of the sensor is varied. We use a novel, low-cost thermal calibration procedure based on a controlled sinusoidal magnetic source and quantitative spectral analysis to measure the thermal gain dependence of fluxgate magnetometer sensors at the ppm°C-1 level in a typical magnetically noisy university laboratory environment. We compare the thermal gain dependence of sensors built from MACOR, polyetheretherketone (PEEK) engineering plastic (virgin, 30 % glass filled and 30 % carbon filled), and acetal to examine the trade between the thermal properties of the material, the impact on the thermal gain dependence of the fluxgate, and the cost and ease of manufacture. We find that thermal gain dependence of the sensor varies as one half of the material properties of the bobbin supporting the wire sense coils rather than being directly related as has been historically thought. An experimental sensor constructed from 30 % glass-filled PEEK (21.6 ppm°C-1) had a thermal gain dependence within 5 ppm°C-1 of a traditional sensor constructed from MACOR ceramic (8.1 ppm°C-1). If a modest increase in thermal

Materials Sciences Division long range plan

International Nuclear Information System (INIS)

1984-12-01

The intent of this document is to provide a framework for programmatic guidance into the future for Materials Sciences. The Materials Sciences program is the basic research program for materials in the Department of Energy. It includes a wide variety of activities associated with the sciences related to materials. It also includes the support for developing, constructing, and operating major facilities which are used extensively but not exclusively by the materials sciences

Degradation of simazine from aqueous solutions by diatomite-supported nanosized zero-valent iron composite materials.

Science.gov (United States)

Sun, Zhiming; Zheng, Shuilin; Ayoko, Godwin A; Frost, Ray L; Xi, Yunfei

2013-12-15

A novel composite material based on deposition of nanosized zero-valent iron (nZVI) particles on acid-leached diatomite was synthesised for the removal of a chlorinated contaminant in water. The nZVI/diatomite composites were characterised by X-ray diffraction, scanning electron microscopy, elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. Compared with the pure nZVI particles, better dispersion of nZVI particles on the surface or inside the pores of diatom shells was observed. The herbicide simazine was selected as the model chlorinated contaminant and the removal efficiency by nZVI/diatomite composite was compared with that of the pristine nZVI and commercial iron powder. It was found that the diatomite supported nZVI composite material prepared by centrifugation exhibits relatively better efficient activity in decomposition of simazine than commercial Fe, lab synthesised nZVI and composite material prepared via rotary evaporation, and the optimum experimental conditions were obtained based on a series of batch experiments. This study on immobilising nZVI particles onto diatomite opens a new avenue for the practical application of nZVI and the diatomite-supported nanosized zero-valent iron composite materials have potential applications in environmental remediation. Copyright © 2013 Elsevier B.V. All rights reserved.

Development of an online information and support resource for adolescent idiopathic scoliosis patients considering surgery: perspectives of health care providers.

Science.gov (United States)

Macculloch, Radha; Nyhof-Young, Joyce; Nicholas, David; Donaldson, Sandra; Wright, James G

2010-06-29

Adolescents with idiopathic scoliosis who are considering spinal surgery face a major decision that requires access to in-depth information and support. Unfortunately, most online resources provide incomplete and inconsistent information and minimal social support. The aim of this study was to develop an online information and support resource for adolescent idiopathic scoliosis (AIS) patients considering spinal surgery. Prior to website development, a user-based needs assessment was conducted. The needs assessment involved a total of six focus groups with three stakeholder groups: (1) post-operative AIS patients or surgical candidates (10-18 years) (n = 11), (2) their parents (n = 6) and (3) health care providers (n = 11). This paper reports on the findings from focus groups with health care providers. Focus group methodology was used to invite a range of perspectives and stimulate discussion. During audio-recorded focus groups, an emergent table of website content was presented to participants for assessment of relevance, viability and comprehensiveness in targeting global domains of need. Specifically, effective presentation of content, desired aspects of information and support, and discussions about the value of peer support and the role of health professionals were addressed. Focus group transcripts were then subject to content analysis through a constant comparative review and analysis. Two focus groups were held with health care providers, consisting of 5 and 6 members respectively. Clinicians provided their perceptions of the information and support needs of surgical patients and their families and how this information and support should be delivered using internet technology. Health care providers proposed four key suggestions to consider in the development of this online resource: (1) create the website with the target audience in mind; (2) clearly state the purpose of the website and organize website content to support the user; (3) offer a

Using mHealth for HIV/TB Treatment Support in Lesotho: Enhancing Patient-Provider Communication in the START Study.

Science.gov (United States)

Hirsch-Moverman, Yael; Daftary, Amrita; Yuengling, Katharine A; Saito, Suzue; Ntoane, Moeketsi; Frederix, Koen; Maama, Llang B; Howard, Andrea A

2017-01-01

mHealth is a promising means of supporting adherence to treatment. The Start TB patients on ART and Retain on Treatment (START) study included real-time adherence support using short-text messaging service (SMS) text messaging and trained village health workers (VHWs). We describe the use and acceptability of mHealth by patients with HIV/tuberculosis and health care providers. Patients and treatment supporters received automated, coded medication and appointment reminders at their preferred time and frequency, using their own phones, and $3.70 in monthly airtime. Facility-based VHWs were trained to log patient information and text message preferences into a mobile application and were given a password-protected mobile phone and airtime to communicate with community-based VHWs. The use of mHealth tools was analyzed from process data over the study course. Acceptability was evaluated during monthly follow-up interviews with all participants and during qualitative interviews with a subset of 30 patients and 30 health care providers at intervention sites. Use and acceptability were contextualized by monthly adherence data. From April 2013 to August 2015, the automated SMS system successfully delivered 39,528 messages to 835 individuals, including 633 patients and 202 treatment supporters. Uptake of the SMS intervention was high, with 92.1% of 713 eligible patients choosing to receive SMS messages. Patient and provider interviews yielded insight into barriers and facilitators to mHealth utilization. The intervention improved the quality of health communication between patients, treatment supporters, and providers. HIV-related stigma and technical challenges were identified as potential barriers. The mHealth intervention for HIV/tuberculosis treatment support in Lesotho was found to be a low-tech, user-friendly intervention, which was acceptable to patients and health care providers.

Support Net for Frontline Providers

Science.gov (United States)

2016-03-01

learning style , as well as treatment readiness (Proudfoot et al., 2011). Several channels of delivery include audio, video, email correspondence and...Provided Resources (1) o “Self assessment, resources were good.” Coaching (2) o “During this coaching period, I had a death of a parent , I did find the...Secondary Traumatic Stress Scale. Res Soc Work Pract. 2004; 14(1):27–35. 21. Pyevich CM, Newman E, Daleiden E. The relationship among cognitive

Framework of the outreach after a school shooting and the students perceptions of the provided support

Directory of Open Access Journals (Sweden)

Tuija Turunen

2014-07-01

Full Text Available Background: A large number of bereaved family members, surviving students, and their relatives as well as school staff and the wider community were in need of psychosocial support as a result of a school shooting in Kauhajoki, Finland, 2008. A multilevel outreach project provided psychosocial care to the trauma-affected families, students, schools staff, and wider community for 2 years and 4 months. Objective: This article is twofold. First, it presents the theoretical rationale behind the psychosocial support and describes the multimodal elements of the services. Second, it analyzes the trauma-exposed students’ help-seeking behavior and perceptions of the usefulness of the support they were offered in different phases of recovery. Method: Information of students’ help-seeking and perceptions of support is based on a follow-up data from 4 months (T1, N=236, 16 months (T2, N=180, and 28 months (T3, N=137 after the shootings. Mean age of students was 24.9 (SD=10.2; 95% women. Their perceptions of the offered psychosocial support were collected with structured and open questions constructed for the study. Results: The results confirmed the importance of enhancing the natural networks after a major trauma and offering additional professional support for those in greatest need. The students’ perceptions of the provided care confirmed that the model of the acute and long-term outreach can be used after major tragedies in diverse situations and in other countries as well.

Framework of the outreach after a school shooting and the students perceptions of the provided support.

Science.gov (United States)

Turunen, Tuija; Haravuori, Henna; Pihlajamäki, Jaakko J; Marttunen, Mauri; Punamäki, Raija-Leena

2014-01-01

A large number of bereaved family members, surviving students, and their relatives as well as school staff and the wider community were in need of psychosocial support as a result of a school shooting in Kauhajoki, Finland, 2008. A multilevel outreach project provided psychosocial care to the trauma-affected families, students, schools staff, and wider community for 2 years and 4 months. This article is twofold. First, it presents the theoretical rationale behind the psychosocial support and describes the multimodal elements of the services. Second, it analyzes the trauma-exposed students' help-seeking behavior and perceptions of the usefulness of the support they were offered in different phases of recovery. Information of students' help-seeking and perceptions of support is based on a follow-up data from 4 months (T1, N=236), 16 months (T2, N=180), and 28 months (T3, N=137) after the shootings. Mean age of students was 24.9 (SD=10.2; 95% women). Their perceptions of the offered psychosocial support were collected with structured and open questions constructed for the study. The results confirmed the importance of enhancing the natural networks after a major trauma and offering additional professional support for those in greatest need. The students' perceptions of the provided care confirmed that the model of the acute and long-term outreach can be used after major tragedies in diverse situations and in other countries as well.

Farmers as providers of raw materials and energy. Proceedings; Der Landwirt als Energie- und Rohstoffwirt. Konferenzbeitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

Within the 10th EUROSOLAR conference at 14th to 15th April, 2008, at Leipzig (Federal Republic of Germany), the following lectures were held: (a) Bioenergy in the Federal Republic of Germany: Potentials, state of the art and perspectives (M. Kaltschmitt, V. Lenz, D. Thraen); (b) Chances and risks of the energy production from biomass in rural area (G. Thalheim); (c) To the compatibility of utilizing bio energy and environmental preservation (K. Mueschen); (d) Biorefinery systems - industrial material use of regenerative raw materials (B. Kamm); (e) Agriculturists and forestry experts as producers of raw material - current risks and new chances (H. Fischer); (f) Potentials of the improvement of productivity by means of an expansion of options of useful plants (K. Goedeke); (g) Farmers as providers of energy and raw materials (H. Loick); (h) Problems and challenges of the utilization of biomass (P. Volkmer); (i) Energetic recycling management (G. Mehler); (j) Pure fuels instead of fuel mixtures - The farmer as providers of energy and raw materials (P. Schrum); (k) Feed and distribution of bio-natural gas from the view of a regional provider (J. Horn); (l) Biogasification and feed into natural gas networks - by the example of BGA Darmstadt-Wixhausen (M. Schlegel); (m) The right framework for the feed of bio methane into natural gas nets (S. Reichelt); (n) Virtual power plants - Efficient option of the local energy production (G. Weissmueller); (o) The role of bio energy in the power mix renewable energies (R. Bischof); (p) The autonomous power supply - from the bio energy village to the autonomous solar energy village (K. Scheffer); (q) Bio energy villages at the Lake Constance - Model projects for the rural area (B. Mueller); (r) Bio energy region Mureck / Steiermark (K. Totter); (s) The bio energy in the current German legislation process (H.-J. Fell).

Readability assessment of online patient education materials provided by the European Association of Urology.

Science.gov (United States)

Betschart, Patrick; Zumstein, Valentin; Bentivoglio, Maico; Engeler, Daniel; Schmid, Hans-Peter; Abt, Dominik

2017-12-01

To assess the readability of the web-based patient education material provided by the European Association of Urology. English patient education materials (PEM) as available in May 2017 were obtained from the EAU website. Each topic was analyzed separately using six well-established readability assessment tools, including Flesch-Kincaid Grade Level (FKGL), SMOG Grade Level (SMOG), Coleman-Liau Index (CLI), Gunning Fog Index (GFI), Flesch Reading Ease Formula (FRE) and Fry Readability Graph (FRG). A total of 17 main topics were identified of which separate basic and in-depth information is provided for 14 topics. Calculation of grade levels (FKGL, SMOG, CLI, GFI) showed readability scores of 7th-13th grade for basic information, 8th-15th grade for in-depth information and 7th-15th grade for single PEM. Median FRE score was 54 points (range 45-65) for basic information and 56 points (41-64) for in-depth information. The FRG as a graphical assessment revealed only 13 valid results with an approximate 8th-17th grade level. The EAU provides carefully worked out PEM for 17 urological topics. Although improved readability compared to similar analyses was found, a simplification of certain chapters might be helpful to facilitate better patient understanding.

Impact on perceived postnatal support, maternal anxiety and symptoms of depression in new mothers in Nepal when their husbands provide continuous support during labour.

Science.gov (United States)

Sapkota, Sabitri; Kobayashi, Toshio; Takase, Miyuki

2013-11-01

when a husband provides continuous support during his wife's labour, his presence is considered effective in reducing her dissatisfaction with the childbirth process. The impact of this on the postnatal well-being of a new mother, however, is not clear. to examine the impact on postnatal support, maternal anxiety and symptoms of depression experienced by new mothers in Nepal when their husband supported them continuously during labour. the study involved 231 Nepali women, of whom 77 were supported continuously by their husbands, 75 by female friends, and 79 were not supported by any companion during childbirth. They were contacted at six to eight weeks post partum, when postpartum support questionnaires, a state-trait anxiety inventory and the Edinburgh postnatal depression scale were administered. Structural equation modelling was conducted. observations showed that continuous support from a husband during his wife's labour was related to a greater degree of postnatal support than those who were not supported by their husband during labour (β=0.23, pdepression (β=0.43, pdepression in new mothers in Nepal. Copyright © 2012 Elsevier Ltd. All rights reserved.

Environmental safety providing during heat insulation works and using thermal insulation materials

Directory of Open Access Journals (Sweden)

Velichko Evgeny

2017-01-01

Full Text Available This article considers the negative effect of thermal insulating materials and products on human health and environment pollution, particularly in terms of the composition of environmentally hazardous construction products. The authors have analyzed the complex measures for providing ecological safety, sanitary and epidemiological requirements, rules and regulations both during thermal insulation works and throughout the following operation of buildings and premises. The article suggests the protective and preventive measures to reduce and eliminate the negative impact of the proceeding of thermal insulation works on the natural environment and on human health.

Factors Predicting Oncology Care Providers' Behavioral Intention to Adopt Clinical Decision Support Systems

Science.gov (United States)

Wolfenden, Andrew

2012-01-01

The purpose of this quantitative correlation study was to examine the predictors of user behavioral intention on the decision of oncology care providers to adopt or reject the clinical decision support system. The Unified Theory of Acceptance and Use of Technology (UTAUT) formed the foundation of the research model and survey instrument. The…

Development of supporting system for emergency response to maritime transport accidents involving radioactive material

International Nuclear Information System (INIS)

Odano, N.; Matsuoka, T.; Suzuki, H.

2004-01-01

National Maritime Research Institute has developed a supporting system for emergency response of competent authority to maritime transport accidents involving radioactive material. The supporting system for emergency response has functions of radiation shielding calculation, marine diffusion simulation, air diffusion simulation and radiological impact evaluation to grasp potential hazard of radiation. Loss of shielding performance accident and loss of sealing ability accident were postulated and impact of the accidents was evaluated based on the postulated accident scenario. Procedures for responding to emergency were examined by the present simulation results

Improving support for parents of children with hearing loss: provider training on use of targeted communication strategies.

Science.gov (United States)

Muñoz, Karen; Nelson, Lauri; Blaiser, Kristina; Price, Tanner; Twohig, Michael

2015-02-01

When proper protocols are followed, children who are identified with a permanent hearing loss early in life have opportunities to develop language on par with their typical hearing peers. Young children with hearing loss are dependent on their parents to manage intervention during early years critical to their development, and parents' ability to effectively integrate recommendations in daily life is foundational for intervention success. Audiologists and early intervention professionals not only need to provide current evidence-based services, but also must address parents' emotional and learning needs related to their child's hearing loss. This study explored practice patterns related to education and support provided to parents of children with hearing loss and the influence of an in-service training on provider attitudes. This study used a prepost design with a self-report questionnaire to identify practice patterns related to communication skills and support used by providers when working with parents of children with hearing loss. A total of 45 participants (21 professionals and 24 graduate students) currently working with children completed the pretraining questionnaire, and 29 participants (13 professionals and 16 graduate students) completed the postquestionnaire. Data were collected using an online questionnaire before the training and 1 mo after training. Descriptive analyses were done to identify trends, and paired-samples t-tests were used to determine changes pretraining to posttraining. Findings revealed that professionals most frequently teach skills to mothers (91%) and infrequently teach skills to fathers (19%) and other caregivers (10%). Professionals reported frequently collaborating with other intervention providers (76%) and infrequently collaborating with primary care physicians (19%). One-third of the professionals reported addressing symptoms of depression and anxiety as an interfering factor with the ability to implement management

Improved thermal storage material for portable life support systems

Science.gov (United States)

Kellner, J. D.

1975-01-01

The availability of thermal storage materials that have heat absorption capabilities substantially greater than water-ice in the same temperature range would permit significant improvements in performance of projected portable thermal storage cooling systems. A method for providing increased heat absorption by the combined use of the heat of solution of certain salts and the heat of fusion of water-ice was investigated. This work has indicated that a 30 percent solution of potassium bifluoride (KHF2) in water can absorb approximately 52 percent more heat than an equal weight of water-ice, and approximately 79 percent more heat than an equal volume of water-ice. The thermal storage material can be regenerated easily by freezing, however, a lower temperature must be used, 261 K as compared to 273 K for water-ice. This work was conducted by the United Aircraft Research Laboratories as part of a program at Hamilton Standard Division of United Aircraft Corporation under contract to NASA Ames Research Center.

The role of textured material in supporting perceptual-motor functions.

Directory of Open Access Journals (Sweden)

Dominic Orth

Full Text Available Simple deformation of the skin surface with textured materials can improve human perceptual-motor performance. The implications of these findings are inexpensive, adaptable and easily integrated clothing, equipment and tools for improving perceptual-motor functionality. However, some clarification is needed because mixed results have been reported in the literature, highlighting positive, absent and/or negative effects of added texture on measures of perceptual-motor performance. Therefore the aim of this study was to evaluate the efficacy of textured materials for enhancing perceptual-motor functionality. The systematic review uncovered two variables suitable for sub-group analysis within and between studies: participant age (groupings were 18-51 years and 64.7-79.4 years and experimental task (upright balance and walking. Evaluation of studies that observed texture effects during upright balance tasks, uncovered two additional candidate sub-groups for future work: vision (eyes open and eyes closed and stability (stable and unstable. Meta-analysis (random effects revealed that young participants improve performance by a small to moderate amount in upright balance tasks with added texture (SMD = 0.28, 95%CI = 0.46-0.09, Z = 2.99, P = 0.001; Tau(2 = 0.02; Chi(2 = 9.87, df = 6, P = 0.13; I(2 = 39.22. Significant heterogeneity was found in, the overall effect of texture: Tau(2 = 0.13; Chi(2 = 130.71, df = 26, P<0.0001; I(2 = 85.98%, pooled samples in upright balance tasks: Tau(2 = 0.09; Chi(2 = 101.57, df = 13, P<0.001; I(2 = 72.67%, and in elderly in upright balance tasks: Tau(2 = 0.16; Chi(2 = 39.42, df = 5, P<0.001; I(2 = 83.05%. No effect was shown for walking tasks: Tau(2 = 0.00; Chi(2 = 3.45, df = 4, P = 0.27, I(2 = 22.99%. Data provides unequivocal support for utilizing textured materials in young healthy populations for improving

Evaluation of design feature No.20 -- Ground support options

International Nuclear Information System (INIS)

Duan, F.

2000-01-01

Ground support options are primarily evaluated for emplacement drifts while ground support systems for non-emplacement openings such as access mains and ventilation drifts are not evaluated against LADS evaluation criteria in this report. Considerations include functional requirements for ground support, the use of a steel-lined system, and the feasibility of using an unlined ground support system principally with grouted rock bolts for permanent ground support. The feature evaluation also emphasizes the postclosure effects of ground support materials on waste isolation and the preclosure aspects such as durability, maintainability, constructibility, safety, engineering acceptability, and cost. This evaluation is to: (A) Review the existing analyses, reports, and studies regarding this design feature, and compile relevant information on performance characteristics. (B) Develop an appropriate evaluation approach for evaluating ground support options against evaluation criteria provided by the LADS team. (C) Evaluate ground support options not only for their preclosure performance in terms of drift stability, material durability, maintenance, constructibility, and cost, but also for their postclosure performance in terms of chemical effects of ground support materials (i.e., concrete, steel) on waste isolation and radionuclide transport. Specifically, the scope for ground support options evaluation include: (1) all steel-lined drifts (no cementitious materials), (2) unlined drifts with minimum cementitious materials (e.g., grout for rockbolts), and (3) concrete-lined drifts, with the focus on the postclosure acceptability evaluation. In addition, unlined drifts with zero cementitious materials (e.g., use of frictional bolts such as split sets, Swellex bolts) are briefly discussed. (D) Identify candidate ground support systems that have the potential to enhance the repository performance based on the feature evaluation. and (E) Provide conclusions and recommendations

Degradation of simazine from aqueous solutions by diatomite-supported nanosized zero-valent iron composite materials

Energy Technology Data Exchange (ETDEWEB)

Sun, Zhiming [School of Chemical and Environmental Engineering, China University of Mining and Technology, Beijing 100083 (China); Chemistry Discipline, Faculty of Science and Technology, Queensland University of Technology, 2 George Street, GPO Box 2434, Brisbane, Queensland 4001 (Australia); Zheng, Shuilin [School of Chemical and Environmental Engineering, China University of Mining and Technology, Beijing 100083 (China); Ayoko, Godwin A.; Frost, Ray L. [Chemistry Discipline, Faculty of Science and Technology, Queensland University of Technology, 2 George Street, GPO Box 2434, Brisbane, Queensland 4001 (Australia); Xi, Yunfei, E-mail: y.xi@qut.edu.au [Chemistry Discipline, Faculty of Science and Technology, Queensland University of Technology, 2 George Street, GPO Box 2434, Brisbane, Queensland 4001 (Australia)

2013-12-15

Graphical abstract: Nanosized zero-valent iron (nZVI) particles were deposited onto acid-leached diatomite through centrifugation or rotary evaporation. The synthesis schematic diagram and morphology of the prepared nZVI/diatomite composites are shown in the illustration. The removal efficiency for herbicide simazine by nZVI/diatomite composites was compared with that of the pristine nZVI and the commercial iron powder. -- Highlights: • Diatomite-supported nanosized zero-valent iron composite was synthesised. • The obtained composites were characterised by XRD, SEM–EDS, TEM and XPS. • The removal efficiency for simazine in water were studied. • The prepared composite showed potential prospects in environmental remediation. -- Abstract: A novel composite material based on deposition of nanosized zero-valent iron (nZVI) particles on acid-leached diatomite was synthesised for the removal of a chlorinated contaminant in water. The nZVI/diatomite composites were characterised by X-ray diffraction, scanning electron microscopy, elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. Compared with the pure nZVI particles, better dispersion of nZVI particles on the surface or inside the pores of diatom shells was observed. The herbicide simazine was selected as the model chlorinated contaminant and the removal efficiency by nZVI/diatomite composite was compared with that of the pristine nZVI and commercial iron powder. It was found that the diatomite supported nZVI composite material prepared by centrifugation exhibits relatively better efficient activity in decomposition of simazine than commercial Fe, lab synthesised nZVI and composite material prepared via rotary evaporation, and the optimum experimental conditions were obtained based on a series of batch experiments. This study on immobilising nZVI particles onto diatomite opens a new avenue for the practical application of nZVI and the diatomite-supported nanosized zero

Biotemplated Palladium Catalysts Can Be Stabilized on Different Support Materials

KAUST Repository

Yates, Matthew D.; Logan, Bruce E.

2014-01-01

© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Sustainably biotemplated palladium catalysts generated on different carbon-based support materials are examined for durability under electrochemical (oxidative) and mechanical-stress conditions. Biotemplated catalysts on carbon paper under both stresses retain 95% (at 0.6V) of the initial catalytic activity as opposed to 70% for carbon cloth and 60% for graphite. Graphite electrodes retain 95% of initial catalytic activity under a single stress. Using electrodeposited polyaniline (PANI) and polydimethylsiloxane binder increases the current density after the stress tests by 22%, as opposed to a 30% decrease for Nafion. PANI-coated electrodes retain more activity than carbon-paper electrodes under elevated mechanical (94 versus 70%) or increased oxidative (175 versus 62%) stress. Biotemplated catalytic electrodes may be useful alternatives to synthetically produce catalysts for some electrochemical applications. Sustainable electrode fabrication: The biotemplated synthesis of catalytic porous electrodes is a sustainable process and, according to the results of durability tests under electrochemical and mechanical stress, these electrodes (e.g. the Pd/carbon paper electrode shown in the picture) are durable enough to replace catalytic electrodes based on synthetic materials in certain applications.

Biotemplated Palladium Catalysts Can Be Stabilized on Different Support Materials

KAUST Repository

Yates, Matthew D.

2014-07-30

© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Sustainably biotemplated palladium catalysts generated on different carbon-based support materials are examined for durability under electrochemical (oxidative) and mechanical-stress conditions. Biotemplated catalysts on carbon paper under both stresses retain 95% (at 0.6V) of the initial catalytic activity as opposed to 70% for carbon cloth and 60% for graphite. Graphite electrodes retain 95% of initial catalytic activity under a single stress. Using electrodeposited polyaniline (PANI) and polydimethylsiloxane binder increases the current density after the stress tests by 22%, as opposed to a 30% decrease for Nafion. PANI-coated electrodes retain more activity than carbon-paper electrodes under elevated mechanical (94 versus 70%) or increased oxidative (175 versus 62%) stress. Biotemplated catalytic electrodes may be useful alternatives to synthetically produce catalysts for some electrochemical applications. Sustainable electrode fabrication: The biotemplated synthesis of catalytic porous electrodes is a sustainable process and, according to the results of durability tests under electrochemical and mechanical stress, these electrodes (e.g. the Pd/carbon paper electrode shown in the picture) are durable enough to replace catalytic electrodes based on synthetic materials in certain applications.

Supporting Aboriginal Women to Quit Smoking: Antenatal and Postnatal Care Providers' Confidence, Attitudes, and Practices.

Science.gov (United States)

Tzelepis, Flora; Daly, Justine; Dowe, Sarah; Bourke, Alex; Gillham, Karen; Freund, Megan

2017-05-01

Tobacco use during pregnancy is substantially higher among Aboriginal women compared to non-Aboriginal women in Australia. However, no studies have investigated the amount or type of smoking cessation care that staff from Aboriginal antenatal and postnatal services provide to clients who smoke or staff confidence to do so. This study examined Aboriginal antenatal and postnatal staff confidence, perceived role and delivery of smoking cessation care to Aboriginal women and characteristics associated with provision of such care. Staff from 11 Aboriginal Maternal and Infant Health Services and eight Aboriginal Child and Family Health services in the Hunter New England Local Health District in Australia completed a cross-sectional self-reported survey (n = 67, response rate = 97.1%). Most staff reported they assessed clients' smoking status most or all of the time (92.2%). However, only a minority reported they offered a quitline referral (42.2%), provided follow-up support (28.6%) or provided nicotine replacement therapy (4.7%) to most or all clients who smoked. Few staff felt confident in motivating clients to quit smoking (19.7%) and advising clients about using nicotine replacement therapy (15.6%). Staff confident with talking to clients about how smoking affected their health had significantly higher odds of offering a quitline referral [OR = 4.9 (1.7-14.5)] and quitting assistance [OR = 3.9 (1.3-11.6)] to clients who smoke. Antenatal and postnatal staff delivery of smoking cessation care to pregnant Aboriginal women or mothers with young Aboriginal children could be improved. Programs that support Aboriginal antenatal and postnatal providers to deliver smoking cessation care to clients are needed. Aboriginal antenatal and postnatal service staff have multiple opportunities to assist Aboriginal women to quit smoking during pregnancy and postpartum. However, staff confidence and practices of offering various forms of smoking cessation support to pregnant Aboriginal

Agricultural Production. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with agricultural production. SMAT materials…

Technology to Support Motivational Interviewing.

Science.gov (United States)

Gance-Cleveland, Bonnie; Ford, Loretta C; Aldrich, Heather; Oetzel, Keri Bolton; Cook, Paul; Schmiege, Sarah; Wold, Mary

This paper reports the findings of motivational interviewing (MI) training with and without technology support on school-based health center (SBHC) providers' satisfaction with MI training, providers' self-report of behavioral counseling related to childhood overweight/obesity, and parents' perception of care after training. The effects of training and technology on MI is part of a larger comparative effectiveness, cluster randomized trial. Twenty-four SBHCs in six states received virtual training on MI. Half the sites received HeartSmartKids™, a bilingual (English/Spanish), decision-support technology. The technology generated tailored patient education materials. Standard growth charts were plotted and health risks were highlighted to support MI counseling. The results of the MI training included provider satisfaction with MI training and parent assessment of the components of MI in their child's care. Providers and parents were surveyed at baseline, after training, and six months after training. Providers were satisfied with training and reported improvements in counseling proficiency (ptechnology group reported significant improvement in provider support for healthy eating (p=0.04). Virtual training has the potential of preparing providers to use MI to address childhood obesity. Technology improved parent support for healthy eating. Future research should evaluate the impact of technology to support MI on patient outcomes. Childhood obesity guidelines emphasize that MI should be used to promote healthy weight in children. Training providers on MI may help more providers incorporate obesity guidelines in their practice. Copyright © 2017 Elsevier Inc. All rights reserved.

[Learning about the social support provided to the family caregiver assisting a family dependent].

Science.gov (United States)

Nardi, Edileuza de Fátima Rosina; de Oliveira, Magda Lúcia Félix

2008-03-01

The elderly suffering disability caused by diseases need a network of support in order to continue feeling socially active. This study aims at characterizing the social support provided to the family caregiver who looks after an elderly dependent, in Brazil. A descriptive study with qualitative approach was conducted at the municipality of Jandaia do Sul, Paraná, Brazil. Data collection was performed through semi-structured interviews with 19 primary family caregivers. Data analysis was based on Thematic Analysis. The results show that when it comes to informal sources, the reference to grown up children was mostly used, while as formal ones Unidade Básica de Saúde, the Brazilian Basic Health Unit, and the team from Programa Saúde da Familia, Brazilian Pro-Family Health Program, were referred to. However, the image of Community Health Agent was the most mentioned. Thus, it is necessary to create support nets to integrate both formal and informal systems.

The effect of winding and core support material on the thermal gain dependence of a fluxgate magnetometer sensor

Directory of Open Access Journals (Sweden)

D. M. Miles

2017-10-01

Full Text Available Fluxgate magnetometers are an important tool in geophysics and space physics but are typically sensitive to variations in sensor temperature. Changes in instrumental gain with temperature, thermal gain dependence, are thought to be predominantly due to changes in the geometry of the wire coils that sense the magnetic field and/or provide magnetic feedback. Scientific fluxgate magnetometers typically employ some form of temperature compensation and support and constrain wire sense coils with bobbins constructed from materials such as MACOR machinable ceramic (Corning Inc. which are selected for their ultra-low thermal deformation rather than for robustness, cost, or ease of manufacturing. We present laboratory results comparing the performance of six geometrically and electrically matched fluxgate sensors in which the material used to support the windings and for the base of the sensor is varied. We use a novel, low-cost thermal calibration procedure based on a controlled sinusoidal magnetic source and quantitative spectral analysis to measure the thermal gain dependence of fluxgate magnetometer sensors at the ppm°C−1 level in a typical magnetically noisy university laboratory environment. We compare the thermal gain dependence of sensors built from MACOR, polyetheretherketone (PEEK engineering plastic (virgin, 30 % glass filled and 30 % carbon filled, and acetal to examine the trade between the thermal properties of the material, the impact on the thermal gain dependence of the fluxgate, and the cost and ease of manufacture. We find that thermal gain dependence of the sensor varies as one half of the material properties of the bobbin supporting the wire sense coils rather than being directly related as has been historically thought. An experimental sensor constructed from 30 % glass-filled PEEK (21.6 ppm°C−1 had a thermal gain dependence within 5 ppm°C−1 of a traditional sensor constructed from MACOR ceramic (8.1�

Farmers as Employers. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of farmers as employers: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication and numeracy skills…

The PTSD Practitioner Registry: An Innovative Tracking, Dissemination, and Support Tool for Providers in Military and Nonmilitary Settings

Science.gov (United States)

2016-10-01

Military and Nonmilitary Settings PRINCIPAL INVESTIGATOR: Raymond C. Rosen, PhD CONTRACTING ORGANIZATION: New Englad Research Instituites , Inc...Partner organizations may have provided financial or in-kind support, supplied facilities or equipment, collaborated in the research, exchanged...location list country) Partner’s contribution to the project (identify one or more)  Financial support;  In-kind support (e.g., partner makes

Modernizing computerized nuclear material accounting systems

International Nuclear Information System (INIS)

Erkkila, B.H.; Claborn, J.

1995-01-01

DOE Orders and draft orders for nuclear material control and accountability address a complete material control and accountability (MC and A) program for all DOE contractors processing, using, or storing nuclear materials. A critical element of an MC and A program is the accounting system used to track and record all inventories of nuclear material and movements of materials in those inventories. Most DOE facilities use computerized accounting systems to facilitate the task of accounting for all their inventory of nuclear materials. Many facilities still use a mixture of a manual paper system with a computerized system. Also, facilities may use multiple systems to support information needed for MC and A. For real-time accounting it is desirable to implement a single integrated data base management system for a variety of users. In addition to accountability needs, waste management, material management, and production operations must be supported. Information in these systems can also support criticality safety and other safety issues. Modern networked microcomputers provide extensive processing and reporting capabilities that single mainframe computer systems struggle with. This paper describes an approach being developed at Los Alamos to address these problems

Burnout and stress factors in special education teachers who provide extra professional support

OpenAIRE

Pogačnik Janežič, Olga

2015-01-01

In the thesis, we discuss the work of special education teachers, who provide extra professional support to children in need. Limitations and weaknesses of their work are also reviewed. Many factors, including changes in the general system of education, parents’ high expectations, unpleasant classroom circumstances, high amount of work tasks and employment uncertainty are just a few of the factors that lead to higher amounts of work-related stress and burnout syndrome. The purpose of the thes...

Decision support system of e-book provider selection for library using Simple Additive Weighting

Science.gov (United States)

Ciptayani, P. I.; Dewi, K. C.

2018-01-01

Each library has its own criteria and differences in the importance of each criterion in choosing an e-book provider for them. The large number of providers and the different importance levels of each criterion make the problem of determining the e-book provider to be complex and take a considerable time in decision making. The aim of this study was to implement Decision support system (DSS) to assist the library in selecting the best e-book provider based on their preferences. The way of DSS works is by comparing the importance of each criterion and the condition of each alternative decision. SAW is one of DSS method that is quite simple, fast and widely used. This study used 9 criteria and 18 provider to demonstrate how SAW work in this study. With the DSS, then the decision-making time can be shortened and the calculation results can be more accurate than manual calculations.

Web-Based Self-Service Systems for Managed IT Support: Service Provider Perspectives of Stakeholder-Based Issues

Science.gov (United States)

Cooper, Vanessa A.; Lichtenstein, Sharman; Smith, Ross

This chapter explores the provision of after-sales information technology (IT) support services using Web-based self-service systems (WSSs) in a business-to-business (B2B) context. A recent study conducted at six large multi-national IT support organisations revealed a number of critical success factors (CSFs) and stakeholder-based issues. To better identify and understand these important enablers and barriers, we explain how WSSs should be considered within a complex network of service providers, business partners and customer firms. The CSFs and stakeholder-based issues are discussed. The chapter highlights that for more successful service provision using WSSs, IT service providers should collaborate more effectively with enterprise customers and business partners and should better integrate their WSSs.

Pregnancy outcomes in Ghana : Relavance of clinical decision making support tools for frontline providers of care

OpenAIRE

Amoakoh-Coleman, M.

2016-01-01

Ghana’s slow progress towards attaining millennium development goal 5 has been associated with gaps in quality of care, particularly quality of clinical decision making for clients. This thesis reviews the relevance and effect of clinical decision making support tools on pregnancy outcomes. Relevance of three clinical decision making support tools available to frontline providers of care in the Greater Accra region is discussed. These are routine maternal health service delivery data populati...

Investigation of training and support needs in rural and remote disability and mainstream service providers: implications for an online training model.

Science.gov (United States)

Johnsson, Genevieve; Kerslake, Rachel; Crook, Sarah; Cribb, Corinne

2017-12-01

Objectives It is known that there are difficulties in recruiting and retaining practitioners in rural and remote communities and that access to support and professional development can be key in breaking this cycle. Technology provides a possible solution not only for increasing access to these opportunities, but also in building community capacity to support children with autism. The aim of the present study was to investigate the current learning and support needs within rural and remote professionals prior to setting up a model of support. Methods An online survey was used to gather information from service providers in rural and remote communities on their demographics, current skills and confidence in working with clients on the autism spectrum, current supervision and professional development, identified learning and support needs, and the availability and uptake of technology for accessing professional development. Results Respondents reported below average levels of perceived confidence and skills when working with children with autism, most notably children with challenging behaviour. Half the respondents do not currently attend supervision sessions, with only 15% receiving regular supervision (fortnightly or more often), and 66% of respondents had travelled more than 3h to access professional development workshops. The majority of participants had access to technology and over half had already used this for online training. Conclusion Overall, service providers in rural and remote areas are generally not currently meeting their needs in terms of frequency of supervision and professional development. The present needs analysis identifies key areas for learning, the ideal frequency of support and the acceptability of using technology to deliver this support. This information will guide future researchers in the development of an evidence-based model that will be accessible and meaningful to its participants. What is known about the topic? It is known that

The Cost of Providing Comprehensive HIV Treatment in PEPFAR-Supported Programs

Science.gov (United States)

Menzies, Nicolas A; Berruti, Andres A; Berzon, Richard; Filler, Scott; Ferris, Robert; Ellerbrock, Tedd V; Blandford, John M

2011-01-01

PEPFAR, national governments, and other stakeholders are investing unprecedented resources to provide HIV treatment in developing countries. This study reports empirical data on costs and cost trends in a large sample of HIV treatment sites. In 2006–2007, we conducted cost analyses at 43 PEPFAR-supported outpatient clinics providing free comprehensive HIV treatment in Botswana, Ethiopia, Nigeria, Uganda, and Vietnam. We collected data on HIV treatment costs over consecutive 6-month periods from scale-up of dedicated HIV treatment services at each site. The study included all patients receiving HIV treatment and care at study sites (62,512 ART and 44,394 pre-ART patients). Outcomes were costs per-patient and total program costs, subdivided by major cost categories. Median annual economic costs were $202 (2009 USD) for pre-ART patients and $880 for ART patients. Excluding ARVs, per-patient ART costs were $298. Care for newly initiated ART patients cost 15–20% more than for established patients. Per-patient costs dropped rapidly as sites matured, with per-patient ART costs dropping 46.8% between first and second 6-month periods after the beginning of scale-up, and an additional 29.5% the following year. PEPFAR provided 79.4% of funding for service delivery, and national governments provided 15.2%. Treatment costs vary widely between sites, and high early costs drop rapidly as sites mature. Treatment costs vary between countries and respond to changes in ARV regimen costs and the package of services. While cost reductions may allow near-term program growth, programs need to weigh the trade-off between improving services for current patients and expanding coverage to new patients. PMID:21412127

Repurposing Existing Material for Performance Support.

Science.gov (United States)

Harvey, Francis A.; Nelson, Adam

1995-01-01

Presents an overview of performance support systems (PSS), describes their role in promoting productivity in agile organizations, and discusses issues related to developing effective performance support using existing orientation, training, or procedural manuals. Topics include strategic principles of agility, and adding value when incorporating…

9 CFR 130.19 - User fees for other veterinary diagnostic services or materials provided at NVSL (excluding FADDL).

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false User fees for other veterinary... User fees for other veterinary diagnostic services or materials provided at NVSL (excluding FADDL). (a) User fees for other veterinary diagnostic services or materials available from NVSL (excluding FADDL...

Pt nanoparticles supported over Ce-Ti-O: the solvothermal and photochemical approaches for the preparation of catalytic materials

International Nuclear Information System (INIS)

Silva, Adrian M. T.; Machado, Bruno F.; Gomes, Helder T.; Figueiredo, Jose L.; Drazic, Goran; Faria, Joaquim L.

2010-01-01

Ce-Ti-O supports with different Ce/Ti molar ratios were synthesized by the solvothermal method using hexadecyltrimethylammonium bromide. Pt nanoparticles were then supported by photochemical deposition. The shape, size, and structure of these materials were analyzed by high-resolution transmission electron microscopy. The single CeO 2 support was also prepared, consisting of agglomerated cubic particles ranging from ∼3 to 8 nm. When titania was combined with ceria, a nanostructured architecture was produced, evidencing the strong influence of Ti in the support structure. Photodeposition of Pt nanoparticles is more efficient on Ce-Ti-O supports than in pristine CeO 2 . Crystalline Pt nanoparticles (mainly of ∼2 to 4 nm) were detected. The catalytic properties of the materials were tested in the selective hydrogenation of cinnamaldehyde to cinnamyl alcohol. It was observed that Pt supported on Ce-Ti-O is more active and selective than Pt on CeO 2 or TiO 2 separately. The catalyst with 40 mol% Ce leads to total conversion of cinnamaldehyde in a few minutes; however, higher selectivity toward the desired product (cinnamyl alcohol) was obtained with higher amounts of Ce (50 mol%).

Carbon nanotubes and other nanostructures as support material for nanoparticulate noble-metal catalysts in fuel cells

DEFF Research Database (Denmark)

Veltzé, Sune; Larsen, Mikkel Juul; Elina, Yli-Rantala

or platinum-alloy catalysts in the electrodes are required. To maximize the utilization of the noble metal it is frequently deposited as nanoparticles (1–5 nm) on a stabilizing support of carbon black. Carbon black provides good anchoring of the catalyst particles, but is prone to severe destructive oxidation...... at high electrical potentials encountered occasionally in fuel cells. Other nanostructures of carbon are being investigated as alternatives to carbon black as they have several beneficial properties. Multi-walled carbon nanotubes (MW-CNT) are an example of one type of these promising materials. Like...... of the fuel-cell electrodes. However, the low concentration of structural defects also poses challenges with regard to anchoring of the catalyst particles on the CNT surface. Thus, activation treatments introducing surface functional groups may be necessary. Also, the surface properties are responsible...

Synthesis and comparison of the activities of a catalyst supported on two silicate materials

Energy Technology Data Exchange (ETDEWEB)

Vieira, Eduardo G., E-mail: eduardogv5007@gmail.com [Departamento de Física e Química, Unesp-Univ Estadual Paulista, Av. Brasil, 56-Centro, Caixa Postal 31, CEP 15385-000, Ilha Solteira, São Paulo (Brazil); Silva, Rafael O.; Carmo, Devaney R. do [Departamento de Física e Química, Unesp-Univ Estadual Paulista, Av. Brasil, 56-Centro, Caixa Postal 31, CEP 15385-000, Ilha Solteira, São Paulo (Brazil); Junior, Enes F. [Departamento de Fitotecnia, Tecnologia de Alimentos e Sócio Economia, Faculdade de Engenharia de Ilha Solteira, Universidade Estadual Paulista, Ilha Solteira, São Paulo (Brazil); Dias Filho, Newton L., E-mail: nldias@unesc.net [Departamento de Física e Química, Unesp-Univ Estadual Paulista, Av. Brasil, 56-Centro, Caixa Postal 31, CEP 15385-000, Ilha Solteira, São Paulo (Brazil); Universidade do Extremo Sul Catarinense, Av. Universitaria, 1105, CP 3167, CEP 88806-000, Criciúma, SC (Brazil)

2017-04-15

The focus of this work is inspecting the synthesis and comparison of the activities of a catalyst supported on two silicate materials in the epoxidation of 1-octene. The two new catalyst materials were characterized by infrared spectroscopy, elemental analysis, solid-state {sup 29}Si and {sup 13}C nuclear magnetic resonance, scanning electronic microscope (SEM) and analysis of nitrogen. Lastly, the two new catalysts, Silsesq-TCA-[(W(CO){sub 3}I{sub 2}){sub 3}] and Silica-TCA-[W(CO){sub 3}I{sub 2}] were tested as catalysts in reactions of epoxidation of 1-octene and compared with their analogue not supported [W(CO){sub 3}I{sub 2}(thiocarbamide)]. After an extensive literature search, we verified that our work is the first that has reported the immobilization process of [W(CO){sub 3}I{sub 2}(NCCH{sub 3}){sub 2}] on silsesquioxane and silica gel functionalized with propyl-thiocarbamide groups and their applications as catalysts of reactions of catalytic epoxidation of 1-octene. - Highlights: • Immobilization of [W(CO){sub 3}I{sub 2}(NCCH{sub 3}){sub 2}] complex onto mesoporous supports. • Synthesis and characterization of new mesoporous catalysts. • The new catalysts exhibit great catalytic activity in the epoxidation of 1-octene. • Recyclable catalysts with excellent reusability and stability.

Effects of framework design and layering material on fracture strength of implant-supported zirconia-based molar crowns.

Science.gov (United States)

Kamio, Shingo; Komine, Futoshi; Taguchi, Kohei; Iwasaki, Taro; Blatz, Markus B; Matsumura, Hideo

2015-12-01

To evaluate the effects of framework design and layering material on the fracture strength of implant-supported zirconia-based molar crowns. Sixty-six titanium abutments (GingiHue Post) were tightened onto dental implants (Implant Lab Analog). These abutment-implant complexes were randomly divided into three groups (n = 22) according to the design of the zirconia framework (Katana), namely, uniform-thickness (UNI), anatomic (ANA), and supported anatomic (SUP) designs. The specimens in each design group were further divided into two subgroups (n = 11): zirconia-based all-ceramic restorations (ZAC group) and zirconia-based restorations with an indirect composite material (Estenia C&B) layered onto the zirconia framework (ZIC group). All crowns were cemented on implant abutments, after which the specimens were tested for fracture resistance. The data were analyzed with the Kruskal-Wallis test and the Mann-Whitney U-test with the Bonferroni correction (α = 0.05). The following mean fracture strength values (kN) were obtained in UNI design, ANA design, and SUP design, respectively: Group ZAC, 3.78, 6.01, 6.50 and Group ZIC, 3.15, 5.65, 5.83. In both the ZAC and ZIC groups, fracture strength was significantly lower for the UNI design than the other two framework designs (P = 0.001). Fracture strength did not significantly differ (P > 0.420) between identical framework designs in the ZAC and ZIC groups. A framework design with standardized layer thickness and adequate support of veneer by zirconia frameworks, as in the ANA and SUP designs, increases fracture resistance in implant-supported zirconia-based restorations under conditions of chewing attrition. Indirect composite material and porcelain perform similarly as layering materials on zirconia frameworks. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Simulation from the first principal theory on the effect of supporting silica on graphene and the new composite material

CSIR Research Space (South Africa)

Kiarii, EM

2017-07-01

Full Text Available Silica has been used as support material with many photocatalytic materials. In this study, silica polymorphs on graphene and epoxy graphene were studied using Density Functional Theory (DFT) to determine the interfacial and optical properties...

A Reference Architecture for Providing Tools as a Service to Support Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef

2014-01-01

-computing paradigm for addressing above-mentioned issues by providing a framework to select appropriate tools as well as associated services and reference architecture of the cloud-enabled middleware platform that allows on demand provisioning of software engineering Tools as a Service (TaaS) with focus......Global Software Development (GSD) teams encounter challenges that are associated with distribution of software development activities across multiple geographic regions. The limited support for performing collaborative development and engineering activities and lack of sufficient support......-based solutions. The restricted ability of the organizations to have desired alignment of tools with software engineering and development processes results in administrative and managerial overhead that incur increased development cost and poor product quality. Moreover, stakeholders involved in the projects have...

FY2016 Lightweight Materials Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-10-31

The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing lightweight materials for passenger and commercial vehicles. This report describes the progress made on the research and development projects funded by the Lightweight Materials area.

QUIN: Providing Integrated Analysis Support to Crime Investigators

NARCIS (Netherlands)

Smit, S.; Vecht, B. van der; Wermeskerken, F.J.P. van; Streefkerk, J.W.

2016-01-01

Crime investigators heavily rely on their large knowledge of criminal behavior. When investigating a new case, applying this knowledge can lead to cognitive overload and tunnel vision. Some support systems are developed to search through historical data and knowledge more easily, but still require

Feasibility study of thermal insulation materials for core support of experimental VHTR

International Nuclear Information System (INIS)

Kawakami, H.; Nakanishi, T.

1982-01-01

Thermal insulation materials for core support of the experimental VHTR, planned by JAERI, should maintain moderate compressive strength and dimensional stability as well as low thermal conductivity at the maximum service temperature of 1100 0 C for 20 years. For selecting materials, we investigate properties of some candidates, and evaluate their feasibility. Preliminary tests, heat treatment test and compressive creep tests for 1000 hours at 900 0 C and 1000 0 C were conducted. In the preliminary tests, EG-38B (carbon baked at 1350 0 C) and Fine Finnex 600 (silicon nitride) showed acceptable physical stability. In the heat treatment tests, silicon nitride showed weight loss probably caused by thermal decomposition. Compressive creep deformation of Fine Finnex 600 was negligible under stress of 100 kg/cm 2 for 1000 hours. Heat treatment at 1200 to 1300 0 C for 50 hours improved dimensional stability of carbon at 1000 0 C

Provider-identified barriers and facilitators to implementing a supported employment program in spinal cord injury.

Science.gov (United States)

Cotner, Bridget A; Ottomanelli, Lisa; O'Connor, Danielle R; Trainor, John K

2018-06-01

In a 5-year study, individual placement and support (IPS) significantly increased employment rate of United States Veterans with spinal cord injury (SCI), a historically underemployed population. In a follow-up study, data on barriers and facilitators to IPS implementation were identified. Over 24 months of implementation, 82 key medical and vocational staff underwent semi-structured interviews (n = 130). Interviews were digitally recorded and qualitatively analyzed (ATLAS.ti v0.7) using a constant comparative method to generate themes. Some barriers to implementation occurred throughout the study, such as Veterans' lack of motivation and providers' difficulty integrating vocational and medical rehabilitation. Other barriers emerged at specific stages, for example, early barriers included a large geographic service area and a large patient caseload, and late barriers included need for staff education. Facilitators were mostly constant throughout implementation and included leadership support and successful integration of vocational staff into the medical care team. Implementation strategies need to be adjusted as implementation progresses and matures. The strategies that succeeded in this setting, which were situated in a real-world context of providing IPS as a part of SCI medical care, may inform implementation of IPS for other populations with physical disabilities. Implications for Rehabilitation Key facilitators to IPS in SCI implementation are integrating vocational staff with expertise in IPS and SCI on clinical rehabilitation teams and providing leadership support. Ongoing barriers to IPS in SCI include patient specific and program administration factors such as caseload size and staffing patterns. Varying implementation strategies are needed to address barriers as they arise and facilitate successful implementation.

Graphitized Carbon: A Promising Stable Cathode Catalyst Support Material for Long Term PEMFC Applications.

Science.gov (United States)

Mohanta, Paritosh Kumar; Regnet, Fabian; Jörissen, Ludwig

2018-05-28

Stability of cathode catalyst support material is one of the big challenges of polymer electrolyte membrane fuel cells (PEMFC) for long term applications. Traditional carbon black (CB) supports are not stable enough to prevent oxidation to CO₂ under fuel cell operating conditions. The feasibility of a graphitized carbon (GC) as a cathode catalyst support for low temperature PEMFC is investigated herein. GC and CB supported Pt electrocatalysts were prepared via an already developed polyol process. The physical characterization of the prepared catalysts was performed using transmission electron microscope (TEM), X-ray Powder Diffraction (XRD) and inductively coupled plasma optical emission spectrometry (ICP-OES) analysis, and their electrochemical characterizations were conducted via cyclic voltammetry(CV), rotating disk electrode (RDE) and potential cycling, and eventually, the catalysts were processed using membrane electrode assemblies (MEA) for single cell performance tests. Electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SEM) have been used as MEA diagonostic tools. GC showed superior stability over CB in acid electrolyte under potential conditions. Single cell MEA performance of the GC-supported catalyst is comparable with the CB-supported catalyst. A correlation of MEA performance of the supported catalysts of different Brunauer⁻Emmett⁻Teller (BET) surface areas with the ionomer content was also established. GC was identified as a promising candidate for catalyst support in terms of both of the stability and the performance of fuel cell.

Status Report on Structural Materials for Advanced Nuclear Systems

International Nuclear Information System (INIS)

Allen, T.R.; Balbaud-Celerier, F.; Asayama, T.; Pouchon, M.; Busby, J.T.; Maloy, S.; Park, J.Y.; Fazio, C.; Dai, Y.; Agostini, P.; Chevalier, J.P.; Marrow, J.

2013-01-01

Materials performance is critical to the safe and economic operation of any nuclear system. As the international community pursues the development of Generation IV reactor concepts and accelerator-driven transmutation systems, it will be increasingly necessary to develop advanced materials capable of tolerating the more challenging environments of these new systems. The international community supports numerous materials research programmes, with each country determining its individual focus on a case-by-case basis. In many instances, similar alloys of materials systems are being studied in several countries, providing the opportunity for collaborative and cross-cutting research that benefits different systems. This report is a snapshot of the current materials programmes supporting the development of advanced concepts. The descriptions of the research are grouped by concept, and national programmes are described within each concept. The report provides an overall sense of the importance of materials research worldwide and the opportunities for synergy among the countries represented in this overview. (authors)

LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

Energy Technology Data Exchange (ETDEWEB)

Dunn, K. [Savannah River National Laboratory; Bellamy, S. [Savannah River National Laboratory; Daugherty, W. [Savannah River National Laboratory; Sindelar, R. [Savannah River National Laboratory; Skidmore, E. [Savannah River National Laboratory

2013-08-18

Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintain integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.

NVENTIONS IN THE NANOTECHNOLOGICAL AREA PROVIDE INCREASED RESISTANCE OF CONSTRUCTION MATERIALS AND PRODUCTS TO OPERATIONAL LOAD

Directory of Open Access Journals (Sweden)

VLASOV Vladimir Alexeevich

2013-12-01

Full Text Available The invention «Dispersion of Carbon Nanotubes (RU 2494961» can be used in production of modifying additives for construction materials. Dispersion of carbon nanotubes contains, mass %: carbon nanotubes 1–20; surface active agent – sodium chloride of sulfonated derived naphthalene 1–20; fumed silica 5–15; water – the rest. Dispersion can additionally contain ethylene glycol as antifreeze. Dispersion is steady in storage, it is soluble in water, provides increased strength of construction materials. Invention «Building Structures Reinforcement Composition (RU 2493337» can beused in construction to reinforce concrete, brick and masonry structures. Composition contains glass or basalt roving taken in quantity 90÷100 parts by weight, soaked in polymer binder based on epoxy taken in quantity 0,001÷1,5 parts by weight. This invention provides high resistance to operational load.

How can computers support, enrich, and transform collaborative creativity

DEFF Research Database (Denmark)

Dalsgaard, Peter; Inie, Nanna; Hansen, Nicolai Brodersen

2017-01-01

of different approaches to providing digital support for collaborative creativity. Participation in the workshop requires participants to actively document and identify salient themes in one or more examples of computer- supported collaborative creativity, and the resulting material will serve as the empirical...

Wind Turbine Providing Grid Support

DEFF Research Database (Denmark)

2011-01-01

changing the operation of the wind turbine to a more efficient working point.; When the rotational speed of the rotor reaches a minimum value, the wind turbine enters a recovery period to re-accelerate the rotor to the nominal rotational speed while further contributing to the stability of the electrical......A variable speed wind turbine is arranged to provide additional electrical power to counteract non-periodic disturbances in an electrical grid. A controller monitors events indicating a need to increase the electrical output power from the wind turbine to the electrical grid. The controller...... is arranged to control the wind turbine as follows: after an indicating event has been detected, the wind turbine enters an overproduction period in which the electrical output power is increased, wherein the additional electrical output power is taken from kinetic energy stored in the rotor and without...

Integrated model for providing tactical emergency medicine support (TEMS): analysis of 120 tactical situations.

Science.gov (United States)

Vainionpää, T; Peräjoki, K; Hiltunen, T; Porthan, K; Taskinen, A; Boyd, J; Kuisma, M

2012-02-01

Various models for organising tactical emergency medicine support (TEMS) in law enforcement operations exist. In Helsinki, TEMS is organised as an integral part of emergency medical service (EMS) and applied in hostage, siege, bomb threat and crowd control situations and in other tactical situations after police request. Our aim was to analyse TEMS operations, patient profile, and the level of on-site care provided. We conducted a retrospective cohort study of TEMS operations in Helsinki from 2004 to 2009. Data were retrieved from EMS, hospital and dispatching centre files and from TEMS reports. One hundred twenty TEMS operations were analysed. Median time from dispatching to arrival on scene was 10 min [Interquartile Range (IQR) 7-14]. Median duration of operations was 41 min (IQR 19-63). Standby was the only activity in 72 operations, four patients were dead on arrival, 16 requests were called off en route and patient examination or care was needed in 28 operations. Twenty-eight patients (records retrieved) were alive on arrival and were classified as trauma (n = 12) or medical (n = 16). Of traumas, two sustained a gunshot wound, one sustained a penetrating abdominal wound, three sustained medium severity injuries and nine sustained minor injuries. There was neither on-scene nor in-hospital mortality among patients who were alive on arrival. The level of on-site care performed was basic life support in all cases. The results showed that TEMS integrated to daily EMS services including safe zone working only was a feasible, rapid and efficient way to provide medical support to law enforcement operations. © 2011 The Authors Acta Anaesthesiologica Scandinavica © 2011 The Acta Anaesthesiologica Scandinavica Foundation.

Mine support, radiation and ventiliation control with spray-on barriers

International Nuclear Information System (INIS)

Archibald, J.F.; De Souza, E.M.

1993-01-01

The use of spray-on linear agents to provide localized excavation support in place of traditional techniques as shotcrete or bolts-and-screen has been the subject of extensive investigation. Several agent materials have been assessed for use in underground excavation support situations, with optimal performance being shown by a polyurethane-based composition designated Mineguard trademark by its developer. In addition to demonstrating exceptional rock support capabilities, this material has also been shown to be capable of significantly reducing levels of radon flux and diffusion flow occurring from highly emanating source environments. The radon impermeability characteristics of Mineguard trademark offers potential for its use in creating effective barriers to naturally-occurring radon flows which typically develop both in underground uranium and non-uranium mines. Laboratory, ventilation investigations have also provided detailed information concerning Mineguard trademark material friction factor, surface roughness and airflow resistance characteristics. The evaluation of friction factor conditions was used to determine potential power and ventilation cost reduction capabilities possible to be achieved when airways may be lined with such spray-on-barrier materials

Fabrication of graphene-fullerene hybrid by self-assembly and its application as support material for methanol electrocatalytic oxidation reaction

Science.gov (United States)

Zhang, Xuan; Zhang, Jia-Wei; Xiang, Ping-Hua; Qiao, Jinli

2018-05-01

Graphene-fullerene hybrids were facilely fabricated by self-assembly of graphene oxide (GO) and multi-substituted fulleropyrrolidines (PyrC60). The hybrids (GO-PyrC60) were applied as support materials to deposit Pd nanoparticle catalyst by a simple hydrothermal co-reduction approach. The as-prepared electrocatalysts (Pd/RGO-PyrC60) were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), respectively. The RGO-PyrC60 hybrid supported Pd catalyst with the optimal ratio of RGO to PyrC60, exhibited much enhanced electrocatalytic activity and stability toward methanol oxidation reaction (MOR) compared to the RGO alone supported Pd as well as commercial Pd/C. The introduction of fulleropyrrolidine as spacer between graphene layers could increase the electrocatalytic activity and improve the long-term stability. This strategy may contribute to developing graphene-fullerene hydrids as effective support materials for advanced electrocatalysts.

Flexible energetic materials and related methods

Energy Technology Data Exchange (ETDEWEB)

Heaps, Ronald J.

2018-03-06

Energetic compositions and methods of forming components from the compositions are provided. In one embodiment, a composition includes aluminum, molybdenum trioxide, potassium perchlorate, and a binder. In one embodiment, the binder may include a silicone material. The materials may be mixed with a solvent, such as xylene, de-aired, shaped and cured to provide a self-supporting structure. In one embodiment, one or more reinforcement members may be added to provide additional strength to the structure. For example, a weave or mat of carbon fiber material may be added to the mixture prior to curing. In one embodiment, blade casting techniques may be used to form a structure. In another embodiment, a structure may be formed using 3-dimensional printing techniques.

Advanced materials for space nuclear power systems

International Nuclear Information System (INIS)

Titran, R.H.; Grobstein, T.L.

1991-01-01

Research on monolithic refractory metal alloys and on metal matrix composites is being conducted at the NASA Lewis Research Center, Cleveland, Ohio, in support of advanced space power systems. The overall philosophy of the research is to develop and characterize new high-temperature power conversion and radiator materials and to provide spacecraft designers with material selection options and design information. Research on three candidate materials (carbide strengthened niobium alloy PWC-11 for fuel cladding, graphite fiber reinforced copper matrix composites (Gr/Cu) for heat rejection fins, and tungsten fiber reinforced niobium matrix composites (W/NB) for fuel containment and structural supports) considered for space power system applications is discussed. Each of these types of materials offers unique advantages for space power applications

Occupational Health and Safety. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed…

Farm Management and Leadership. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in farm management and leadership: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner with the reading, writing, and spoken communication skills needed to deal with…

Accidents with potentially hazardous biological material among workers in hospital supporting services.

Science.gov (United States)

Canini, Silvia Rita Marin da Silva; Gir, Elucir; Machado, Alcyone Artiolli

2005-01-01

Descriptive study was carried out to characterize the occupational accidents involving potentially contaminated material among workers of hospital supporting services. The study reviewed records of workers involved in these accidents and attended at a specialized outpatient clinic of a large tertiary care hospital between January 1997 and October 2001. A total of 2814 workers from different professional categories were attended during this period. Of these, 147 (5.2%) belonged to the hospital supporting services and were the victims of 156 accidents, auxiliary cleaning personnel (80.2%), and over a third of the workers had not received any dose of hepatitis B vaccine (35.4%). Most accidents were due to sharp injuries (96.8%) caused by inadequately discarded hollow needles. Chemoprophylaxis for HIV was not indicated in only 23.1% of cases. We conclude that these workers are also exposed to the possibility of acquiring blood-borne pathogens and that periodical education programs are needed.

Materials and boiler rig testing to support chemical cleaning of once-through AGR boilers

International Nuclear Information System (INIS)

Tice, D.R.; Platts, N.; Raffel, A.S.; Rudge, A.

2002-01-01

An extensive programme of work has been carried out to evaluate two candidate inhibited cleaning solutions for possible implementation on plant, which would be the first chemical clean of an AGR boiler. The two candidate cleaning solutions considered were a Stannine-inhibited citric acid/formic acid mixture (GOM106) and inhibited hydrofluoric acid. Citric acid-based cleaning processes are widely used within the UK Power Industry. The GOM106 solution, comprising a mixture of 3% citric acid, 0.5% formic acid and 0.05% Stannine LTP inhibitor, buffered with ammonia to pH 3.5, was developed specifically for the AGR boilers during the 1970's. Although a considerable amount of materials testing work was carried out by British Energy's predecessor companies to produce a recommended cleaning procedure there were some remaining concerns with the use of GOM106, from these earlier studies, for example, an increased risk of pitting attack associated with the removal of thick 9Cr oxide deposits and a risk of unacceptable damage in critical locations such as the upper transition joints and other weld locations. Hence, additional testing was still required to validate the solution for use on plant. Inhibited hydrofluoric acid (HFA) was also evaluated as an alternative reagent to GOM106. HFA has been used extensively for cleaning mild and low'alloy steel boiler tubes in fossil-fired plant in the UK and elsewhere in Europe and is known to remove oxide quickly. Waste treatment is also easier than for the GOM106 process and some protection against damage to the boiler tube materials is provided by complexing of fluoride with ferric ion. Validation of the potential reagents and inhibitors was achieved by assessing the rate and effectiveness of oxide removal from specimens of helical boiler tubing and welds, together with establishing the extent of any metal loss or localised damage. The initial materials testing resulted in the inhibited ammoniated citric / formic acid reagent being

The technical support organization at BNL is twenty years old

International Nuclear Information System (INIS)

Indusi, J.P.

1988-01-01

The Technical Support Organization was established by the Atomic Energy Commission in January 1968 at Brookhaven National Laboratory (BNL). The original idea came from a small group of scientists at BNL. The group included Willy Higinbotham, Herb Kouts, Frank Miles, Richard Dodson, and Gerhardt Friedlander. The AEC endorsed the idea of a technical support group to provide technical assistance to AEC's Office of Safeguards and Materials Management and they sent requests for expressions of interest throughout the complex. For a number of reasons, to be discussed in the paper, the Technical Support Organization was established at BNL. An early project was the Conceptual Design for Safeguarding Nuclear Material which formed the first logical and systematic description of the integration of several elements into a safeguards system for protecting nuclear materials. Many other projects were undertaken over the years. TSO today provides technical assistance to the DOE Office of Safeguards and Secuirty, the Office of Classification and Technology Policy, and the Office of Security Evaluations. Technical support to the IAEA is provided under the Program of Technical Assistance to Agency Safeguards (POTAS). Recently, TSO began a program of technical assistance to the Air Force Weapons Laboratory in the area of nuclear systems security

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider.

Science.gov (United States)

Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

2017-04-10

There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

Materials used in new generation vehicles: supplies, shifts, and supporting infrastructure

Energy Technology Data Exchange (ETDEWEB)

Das, S.; Curlee, T.R. [Oak Ridge National Lab., TN (United States); Schexnayder, S.M. [Univ. of Tennessee, Knoxville, (United States)

1997-08-01

The Partnership for a New Generation of Vehicles (PNGV) program intends to develop new designs for automobiles that will reduce fuel consumption by two thirds but otherwise have price, comfort, safety, and other measures of performance similar to the typical automobile now on the market. PNGV vehicle designs are expected to substitute lightweight materials, such as aluminum, magnesium, carbon-reinforced polymer composites, glass-reinforced polymer composites, and ultra- light steel, for heavier materials such as steel and iron in automobile components. The target mass of a PNGV vehicle is 1,960 pounds, as compared to the average current vehicle that weights 3,240 pounds. Other changes could include the use of different ferrous alloys, engineering changes, or incorporation of advanced ceramic components. Widespread adoption of these vehicle designs would affect materials markets and require concurrent development and adoption of supporting technologies to supply the materials and to use and maintain them in automobiles. This report identifies what would be required to bring about these changes and developments in materials substitution; identifies reasons that might make these substitutions difficult to accomplish within the overall objectives and timetable of the PNGV program; and identifies any issues arising from the substitution that could prompt consideration of policies to deal with them. The analysis in this paper uses scenarios that assume the production of new generation vehicles will begin in 2007 and that their market share will increase gradually over the following 25 years. The scenarios on which the analysis is based assume a maximum substitution of each potential replacement material considered. This maximum substitution of individual materials (i.e., the amount of replacement material by weight that would be added to the baseline vehicle`s composition) is as follows: ULSAB (high strength steel), 298 lbs.; glass-reinforced composites, 653 lbs.; carbon

Farmers as Employers. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of farmers as employers: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with employment of agriculture…

Method of tissue repair using a composite material

Energy Technology Data Exchange (ETDEWEB)

Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O' Neill, Hugh M.

2016-03-01

A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

Method of tissue repair using a composite material

Science.gov (United States)

Hutchens, Stacy A; Woodward, Jonathan; Evans, Barbara R; O'Neill, Hugh M

2014-03-18

A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

Should Sabbath Prohibitions Be Overridden to Provide Emotional Support to a Sick Relative?

Directory of Open Access Journals (Sweden)

Chaya Greenberger

2016-07-01

Full Text Available Background There is a consensus among the halachic authorities that life-saving actions override Sabbath prohibitions. They are painstaking in securing that the sanctity of the Sabbath is maintained but that not a single life be lost. Objective This manuscript examines if and when a relative’s presence at the bedside of a seriously ill individual is potentially life-saving against the backdrop of the scientific literature. It specifically addresses the permissibility of traveling in a motorized vehicle, generally prohibited on the Sabbath, to be with one’s relative in hospital for the provision of emotional support. Methods Discourse of the halachic issues in the context of the scientific literature. Results Stress, mental or physical, has been determined as a potentially life-threatening condition in many disease entities. The literature attests to both the patient’s and the professionals’ perception of the curative potential of the presence of loved ones by advocating for the patient and relieving stress in the hospital experience. Emotional support from a loved one is perceived by some patients as vital to survival. There is halachic consensus that a patient’s perception of the emotional need for a relative’s presence is sufficient to permit overriding rabbinic prohibitions. Torah prohibitions, which may be overridden for medical needs, may be overridden for emotional support, providing a health professional or family member attests to the fulfilment of this specific need as diminishing the danger to the patient’s life. In certain cases, the latter contingency is unnecessary. Conclusions Emotional support has an impact on the patient’s health status; the degree to which its impact is strong enough to save life is still being studied. As more data from scientific studies emerge, they may be relevant to sharpening the halachic rulings with respect to the issue at hand.

Operational Decision Support for Material Management in Continuous Mining Systems: From Simulation Concept to Practical Full-Scale Implementations

Directory of Open Access Journals (Sweden)

Masoud Soleymani Shishvan

2017-07-01

Full Text Available Material management in opencast mines is concerned with planning, organizing, and control of the flow of materials from their extraction points to destinations. It can be strongly affected by operational decisions that have to be made during the production process. To date, little research has focused on the application of simulation modeling as a powerful supportive tool for decision making in such systems. Practical experiences from implementing a simulation model of a mine for the operational support on an industrial scale are not known to the authors. This paper presents the extension of a developed stochastic simulation model by the authors from a conceptual stage (TRL4 to a new Technology Readiness Level (TRL 6 by implementing it in an industrially relevant environment. A framework for modeling, simulation, and validation of the simulation model applied to two large opencast lignite mines is presented in detail. Operational implementation issues, experiences, and challenges in practical applications are discussed. Furthermore, the strength of applying the simulation modeling as an operational decision support for material management in coal mining is demonstrated. Results of the case studies are used to describe the details of the framework, and to illustrate the strength and limitations of its application.

FY2014 Lightweight Materials R&D Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None

2015-03-01

The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing lightweight materials for passenger and commercial vehicles.

Safe Transport of Radioactive Material, Philosophy and Overview

Energy Technology Data Exchange (ETDEWEB)

EL-Shinawy, R M.K. [Radiation Protection Dept., Nuclear Rasearch Center, Atomic Energy Authority, Cairo (Egypt)

2008-07-01

Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international and national regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1(ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series Nos 7and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series Nos 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS no.113), compliance assurance (SS no. 112), the training manual and others.

Safe Transport of Radioactive Material, Philosophy and Overview

International Nuclear Information System (INIS)

EL-Shinawy, R.M.K.

2008-01-01

Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international and national regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1(ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series Nos 7and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series Nos 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS no.113), compliance assurance (SS no. 112), the training manual and others

The development of an enhanced strain measurement device to support testing of radioactive material packages

International Nuclear Information System (INIS)

Uncapkher, W.L.; Arviso, M.

1995-01-01

Radioactive material package designers use structural testing to verify and demonstrate package performance. A major part of evaluating structural response is the collection of reliable instrumentation measurement data. Over the last four decades, Sandia National Laboratories (SNL) has been actively involved in the development, testing, and evaluation of measurement devices for a broad range of applications, resulting in the commercialization of several measurement devices commonly used today. SNL maintains an ongoing program sponsored by the US Department of Energy (DOE) to develop and evaluate measurement devices to support testing of packages used to transport radioactive or hazardous materials. The development of the enhanced strain measurement device is part of this program

Providing health information to the general public: a survey of current practices in academic health sciences libraries.

Science.gov (United States)

Hollander, S M

2000-01-01

A questionnaire was mailed to 148 publicly and privately supported academic health sciences libraries affiliated with Association of American Medical Colleges (AAMC-accredited medical schools in the United States and Canada to determine level of access and services provided to the general public. For purposes of this study, "general public" was defined as nonaffiliated students or health care professionals, attorneys and other nonhealth-related professionals, patients from affiliated or other hospitals or clinics, and general consumers. One hundred five (71%) libraries responded. Results showed 98% of publicly supported libraries and 88% of privately supported libraries provided access to some or all of the general public. Publicly supported libraries saw greater numbers of public patrons, often provided more services, and were more likely to circulate materials from their collections than were privately supported libraries. A significant number of academic health sciences libraries housed a collection of consumer-oriented materials and many provided some level of document delivery service, usually for a fee. Most allowed the public to use some or all library computers. Results of this study indicated that academic health sciences libraries played a significant role in serving the information-seeking public and suggested a need to develop written policies or guidelines covering the services that will be provided to minimize the impact of this service on primary clientele.

Providing health information to the general public: a survey of current practices in academic health sciences libraries*

Science.gov (United States)

Hollander, Sue M.

2000-01-01

A questionnaire was mailed to 148 publicly and privately supported academic health sciences libraries affiliated with Association of American Medical Colleges (AAMC)–accredited medical schools in the United States and Canada to determine level of access and services provided to the general public. For purposes of this study, “general public” was defined as nonaffiliated students or health care professionals, attorneys and other nonhealth-related professionals, patients from affiliated or other hospitals or clinics, and general consumers. One hundred five (71%) libraries responded. Results showed 98% of publicly supported libraries and 88% of privately supported libraries provided access to some or all of the general public. Publicly supported libraries saw greater numbers of public patrons, often provided more services, and were more likely to circulate materials from their collections than were privately supported libraries. A significant number of academic health sciences libraries housed a collection of consumer-oriented materials and many provided some level of document delivery service, usually for a fee. Most allowed the public to use some or all library computers. Results of this study indicated that academic health sciences libraries played a significant role in serving the information-seeking public and suggested a need to develop written policies or guidelines covering the services that will be provided to minimize the impact of this service on primary clientele. PMID:10658965

MSRR Rack Materials Science Research Rack

Science.gov (United States)

Reagan, Shawn

2017-01-01

The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and the European Space Agency (ESA) for materials science investigations on the International Space Station (ISS). The MSRR is managed at the Marshall Space Flight Center (MSFC) in Huntsville, AL. The MSRR facility subsystems were manufactured by Teledyne Brown Engineering (TBE) and integrated with the ESA/EADS-Astrium developed Materials Science Laboratory (MSL) at the MSFC Space Station Integration and Test Facility (SSITF) as part of the Systems Development Operations Support (SDOS) contract. MSRR was launched on STS-128 in August 2009, and is currently installed in the U. S. Destiny Laboratory Module on the ISS. Materials science is an integral part of developing new, safer, stronger, more durable materials for use throughout everyday life. The goal of studying materials processing in space is to develop a better understanding of the chemical and physical mechanisms involved, and how they differ in the microgravity environment of space. To that end, the MSRR accommodates advanced investigations in the microgravity environment of the ISS for basic materials science research in areas such as solidification of metals and alloys. MSRR allows for the study of a variety of materials including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. Currently the NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA developed Materials

Mechanical alignment of particles for use in fabricating superconducting and permanent magnetic materials

International Nuclear Information System (INIS)

Nellis, W.J.; Maple, M.B.

1992-01-01

This patent describes a method of fabricating oriented compacts of superconducting and/or permanent magnetic material. It comprises: providing a base layer of support material, mechanically orienting aligned superconducting or permanently magnetic particles into the desired orientation on the base layer, without mixing the particles with a liquid, optionally covering the particles with a support material, fabricating the base layer and oriented particles assemblage into a desired construct and recovering the resulting fabricated material

FMIT: an accelerator-based neutron factory for fusion materials qualification

International Nuclear Information System (INIS)

Burke, R.J.; Hagan, J.W.; Trego, A.L.

1983-01-01

The Fusion Materials Irradiation Test Facility will provide a unique testing environment for irradiation of structural and special-purpose materials in support of fusion-power systems. The neutron source will be produced by a deuteron-lithium stripping reaction to generate high-energy neutrons to ensure materials damage characteristic of the deuterium-tritium power system. The facility, its testing role, the status, and major aspects of its design and supporting system development are described. Emphasis is given to programmatic elements and features incorporated in the accelerator and other systems to assure that the FMIT runs as a highly reliable fusion materials testing installation

HiRadMat at CERN/SPS - A dedicated facility providing high intensity beam pulses to material samples

CERN Multimedia

Charitonidis, N; Efthymiopoulos, I

2014-01-01

HiRadMat (High Radiation to Materials), constructed in 2011, is a facility at CERN designed to provide high‐intensity pulsed beams to an irradiation area where material samples as well as accelerator component assemblies (e.g. vacuum windows, high power beam targets, collimators…) can be tested. The facility uses a 440 GeV proton beam extracted from the CERN SPS with a pulse length of up to 7.2 us, and with a maximum pulse energy of 3.4 MJ (3xE13 proton/pulse). In addition to protons, ion beams with energy of 440 GeV/charge and total pulse energy of 21 kJ can be provided. The beam parameters can be tuned to match the needs of each experiment. HiRadMat is not an irradiation facility where large doses on equipment can be accumulated. It is rather a test area designed to perform single pulse experiments to evaluate the effect of high‐intensity pulsed beams on materials or accelerator component assemblies in a controlled environment. The fa‐ cility is designed for a maximum of 1E16 protons per year, dist...

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

Directory of Open Access Journals (Sweden)

Heather E Douglas

2017-04-01

Full Text Available Introduction: There is limited evidence of the benefits of information and communication technology (ICT to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

Science.gov (United States)

Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

2017-01-01

Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients. PMID:29042851

Comparing consumer-directed and agency models for providing supportive services at home.

Science.gov (United States)

Benjamin, A E; Matthias, R; Franke, T M

2000-04-01

To examine the service experiences and outcomes of low-income Medicaid beneficiaries with disabilities under two different models for organizing home-based personal assistance services: agency-directed and consumer-directed. A survey of a random sample of 1,095 clients, age 18 and over, who receive services in California's In-Home Supportive Services (IHSS) program funded primarily by Medicaid. Other data were obtained from the California Management and Payrolling System (CMIPS). The sample was stratified by service model (agency-directed or consumer-directed), client age (over or under age 65), and severity. Data were collected on client demographics, condition/functional status, and supportive service experience. Outcome measures were developed in three areas: safety, unmet need, and service satisfaction. Factor analysis was used to reduce multiple outcome measures to nine dimensions. Multiple regression analysis was used to assess the effect of service model on each outcome dimension, taking into account the client-provider relationship, client demographics, and case mix. Recipients of IHSS services as of mid-1996 were interviewed by telephone. The survey was conducted in late 1996 and early 1997. On various outcomes, recipients in the consumer-directed model report more positive outcomes than those in the agency model, or they report no difference. Statistically significant differences emerge on recipient safety, unmet needs, and service satisfaction. A family member present as a paid provider is also associated with more positive reported outcomes within the consumer-directed model, but model differences persist even when this is taken into account. Although both models have strengths and weaknesses, from a recipient perspective the consumer-directed model is associated with more positive outcomes. Although health professionals have expressed concerns about the capacity of consumer direction to assure quality, particularly with respect to safety, meeting unmet

Regulatory/Scientific Supports for Micro-, Small-, and Medium-Sized Enterprises (SMEs) With Medicinal Products Provided by the PMDA and EMA.

Science.gov (United States)

Kondo, Hideyuki; Shibatsuji, Masayoshi; Yasuda, Naoyuki

2018-01-01

Micro-, small-, and medium-sized enterprises (SMEs) have been considered as key players who can bring innovative medicinal products and/or technologies into the field. However, they may need much regulatory/scientific supports to provide their products, technologies, or services to the market in a timely way. Both the Pharmaceuticals and Medical Devices Agency (PMDA) and the European Medicines Agency (EMA), regulatory authorities for medicinal products in Japan and the EU, respectively, have prepared supportive measures for SMEs from the early phase of product/technology development to the postmarketing phase. With respect to supports for SMEs, both agencies have provided similar SME-specific supportive activities, including routine administrative assistance, consultations about product development strategy from an early phase, as well as specific regulatory/scientific issues and fee incentives. In addition, there is a system to register SME status in the EU, which can be a tool for regulators to know how much potential SME-driven activities have and with whom they should communicate to provide necessary supports. Furthermore, as new technologies and novel products from SMEs are not limited to the region where they are developed, close communication about these topics between the PMDA and the EMA will contribute to advancing patients' access to necessary medicinal products.

Providing nutritional support to patients with thoracic cancer: findings of a dedicated rehabilitation service.

Science.gov (United States)

Percival, Cheryl; Hussain, Asmah; Zadora-Chrzastowska, Sonja; White, Gillian; Maddocks, Matthew; Wilcock, Andrew

2013-05-01

National guidelines recommend screening patients with thoracic cancer to identify those requiring nutritional support. To help quantify this area of need, the associated workload and explore its impact, we report findings from a dedicated rehabilitation service. Patients were screened soon after diagnosis to determine the prevalence of malnutrition, and various aspects compared between malnourished and not malnourished groups. A nutritional care plan was instigated and all contacts recorded, together with follow-up body weight. Of 243 patients seen, 35% were malnourished which was associated with a palliative treatment intent (P group received oral nutritional supplements, but also experienced problems tolerating them. Over one month, neither the pattern nor magnitude of the change in weight differed between malnourished and not malnourished groups. Overall, weight was stable, increased or decreased in 52 (27%), 80 (42%) and 59 (31%) respectively, with no difference in overall survival (P = 0.16). Our data provides a pragmatic insight into the implications of following national guidance on nutritional screening and support in this patient group. Nutritional support failed to prevent weight loss in some patients, and did not appear to impact on survival; new assessments and treatments for cachexia are required. Copyright © 2013 Elsevier Ltd. All rights reserved.

Providing for organizational memory in computer supported meetings

OpenAIRE

Schwabe, Gerhard

1994-01-01

Meeting memory features are poorly integrated into current group support systems (GSS). In this article, I discuss how to introduce meeting memory functionality into a GSS. The article first introduces the benefits of effective meetings and organizational memory to an organization. Then, the following challenges to design are discussed: How to store semantically rich output, how to build up the meeting memory with a minimum of additional effort, how to integrate meeting memory into organizati...

BASINs 4.0 Climate Assessment Tool (CAT): Supporting ...

Science.gov (United States)

EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of Research and Development, that focuses on assessing how potential changes in climate and other global environmental stressors may impact water quality, air quality, aquatic ecosystems, and human health in the United States. The Program’s focus on water quality is consistent with the Research Strategy of the U.S. Climate Change Research Program—the federal umbrella organization for climate change science in the U.S. government—and is responsive to U.S. EPA’s mission and responsibilities as defined by the Clean Water Act and the Safe Drinking Water Act. A central goal of the EPA GCRP is to provide EPA program offices, Regions, and other stakeholders with tools and information for assessing and responding to any potential future impacts of climate change. In 2007, the EPA Global Change Research Program (GCRP), in partnership with the EPA Office of Water, supported development of a Climate Assessment Tool (CAT) for version 4 of EPA’s BASINS modeling system. This report provides supporting documentation and user support materials for the BASINS CAT tool. The purpose of this report is to provide in a single document a variety of documentation and user support materials supporting the use

The development of a digital signal processing and plotting package to support testing of hazardous and radioactive material packages

International Nuclear Information System (INIS)

Ludwigsen, J.S.; Uncapher, W.L.; Arviso, M.; Lattier, C.N.; Hankinson, M.; Cannone, D.J.

1995-01-01

Federal regulations allow package designers to use analysis, testing, or a combination of analysis and testing to support certification of packages used to transport hazardous or radioactive materials. In recent years, many certified packages were subjected to a combination of analysis and testing. A major part of evaluating structural or thermal package response is the collection, reduction and presentation of instrumentation measurement data. Sandia National Laboratories, under the sponsorship of the US Department of Energy, has developed a comprehensive analysis and plotting package (known as KAPP) that performs digital signal processing of both transient structural and thermal data integrated with a comprehensive plotting package designed to support radioactive material package testing

Scientific support, soil information and education provided by the Austrian Soil Science Society

Science.gov (United States)

Huber, Sigbert; Baumgarten, Andreas; Birli, Barbara; Englisch, Michael; Tulipan, Monika; Zechmeister-Boltenstern, Sophie

2015-04-01

The Austrian Soil Science Society (ASSS), founded in 1954, is a non-profit organisation aiming at furthering all branches of soil science in Austria. The ASSS provides information on the current state of soil research in Austria and abroad. It organizes annual conferences for scientists from soil and related sciences to exchange their recent studies and offers a journal for scientific publications. Annually, ASSS awards the Kubiena Research Prize for excellent scientific studies provided by young scientists. In order to conserve and improve soil science in the field, excursions are organized, also in cooperation with other scientific organisations. Due to well-established contacts with soil scientists and soil science societies in many countries, the ASSS is able to provide its members with information about the most recent developments in the field of soil science. This contributes to a broadening of the current scientific knowledge on soils. The ASSS also co-operates in the organisation of excursions and meetings with neighbouring countries. Several members of the ASSS teach soil science at various Austrian universities. More detail on said conferences, excursions, publications and awards will be given in the presentation. Beside its own scientific journal, published once or twice a year, and special editions such as guidebooks for soil classification, the ASSS runs a website providing information on the Society, its activities, meetings, publications, awards and projects. Together with the Environment Agency Austria the ASSS runs a soil platform on the internet. It is accessible for the public and thus informs society about soil issues. This platform offers a calendar with national and international soil events, contacts of soil related organisations and networks, information on national projects and publications. The society has access to products, information material and information on educational courses. Last but not least information on specific soil

Longevity of Emplacement Drift Ground Support Materials for LA

Energy Technology Data Exchange (ETDEWEB)

D. Tang

2003-09-16

The purpose of this analysis report is to evaluate and document the inclusion or exclusion of the disruptive events features, events, and processes (FEPs) with respect to modeling used to support the total system performance assessment for license application (TSPA-LA). A screening decision, either ''Included'' or ''Excluded,'' is given for each FEP, along with the technical basis for screening decisions. This information is required by the U.S. Nuclear Regulatory Commission (NRC) at 10 CFR 63.114 (d), (e), and (f) [DIRS 156605]. The FEPs addressed in this report deal with both seismic and igneous disruptive events, such as fault displacements through the repository and an igneous intrusion into the repository. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). Previous versions of this report were developed to support the total system performance assessments (TSPA) for various prior repository designs. This revision addresses the repository design for the license application (LA).

Systems analysis for materials control and accountancy technology

International Nuclear Information System (INIS)

Daly, T.A.; Bucher, R.G.; Rothman, A.B.; Charak, I.; Persiani, P.J.

1987-01-01

The objective is to upgrade Materials Control and Accountancy (MCandA) technology over the flows of special nuclear materials throughout the DOE complex of fuel cycles. The program focus is to develop a ''Management Tool'' for decision support in evaluating MCandA upgrades, and invalidating the MCandA aspects of the Master Safeguards and Security Agreements (MSSA) effectiveness. The approach is the computerization of the nuclear materials flow charts, identification of key measurement locations in the production and product fuel cycle, and construct data information processing at each measurement location. The program is to provide the Office of Safeguards and Security (OSS) with a timely management decision support system in planning MCandA safeguards technology upgrades over the nuclear materials production and product cycles

Materials and Components Technology Division research summary, 1992

International Nuclear Information System (INIS)

1992-11-01

The Materials and Components Technology Division (MCT) provides a research and development capability for the design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs related to nuclear energy support the development of the Integral Fast Reactor (IFR): life extension and accident analyses for light water reactors (LWRs); fuels development for research and test reactors; fusion reactor first-wall and blanket technology; and safe shipment of hazardous materials. MCT Conservation and Renewables programs include major efforts in high-temperature superconductivity, tribology, nondestructive evaluation (NDE), and thermal sciences. Fossil Energy Programs in MCT include materials development, NDE technology, and Instrumentation design. The division also has a complementary instrumentation effort in support of Arms Control Technology. Individual abstracts have been prepared for the database

Mothers' and health visitors' perceptions of the support provided to mothers who have experienced domestic violence: A systematic review.

Science.gov (United States)

Eynon, Julia; Carrier, Judith; Rees, Sally; Cartwright, Annie

2012-01-01

Domestic violence has been described as a public health epidemic, with victims of domestic violence encountered in all health care settings. Within the United Kingdom the role of the health visitor (specialist community public health nurse) is to promote health in the whole community; every family with a child under five years has a named health visitor. Preparation for the health visitor role is unique to the United Kingdom. Health visitors are particularly well placed to identify and support mothers who are experiencing domestic violence. The objective of this review was to synthesise the best available evidence relating to support provided by UK health visitors for mothers who have experienced domestic violence, from both the mothers and the health visitors' perspectives. The participants of interest were mothers who have experienced domestic violence and health visitors who offer support to those mothers.The self reported experiences of health visitor support provided to mothers who have experienced domestic violence, from the perspective of both the mothers and the health visitors providing the support.This review considered studies that focus on qualitative data including, but not limited to, designs such as ethnography, phenomenology, grounded theory, action research and feminist research. Studies published up to April 2011 were included in the review. The search was restricted to English language studies. The databases searched were: Medline, CINAHL, PsycINFO, PsycARTICLES, EMBASE, British Nursing Index and Archive, ASSIA and TRIP. Studies were assessed for methodological quality using the standardised critical appraisal instruments from the Joanna Briggs Institute. Data were extracted using standardised data extraction tools from the Joanna Briggs Institute. Data synthesis used the Joanna Briggs Institute approach for meta-synthesis by meta-aggregation. Findings were synthesised into categories, which were aggregated into synthesised findings. Four

Multi-gene analysis provides a well-supported phylogeny of Rosales.

Science.gov (United States)

Zhang, Shu-dong; Soltis, Douglas E; Yang, Yang; Li, De-zhu; Yi, Ting-shuang

2011-07-01

Despite many attempts to resolve evolutionary relationships among the major clades of Rosales, some nodes have been extremely problematic and have remained unresolved. In this study, we use two nuclear and 10 plastid loci to infer phylogenetic relationships among all nine families of Rosales. Rosales were strongly supported as monophyletic; within Rosales all family relationships are well-supported with Rosaceae sister to all other members of the order. Remaining Rosales can be divided into two subclades: (1) Ulmaceae are sister to Cannabaceae plus (Urticaceae+Moraceae); (2) Rhamnaceae are sister to Elaeagnaceae plus (Barbeyaceae+Dirachmaceae). One noteworthy result is that we recover the first strong support for a sister relationship between the enigmatic Dirachmaceae and Barbeyaceae. These two small families have distinct morphologies and potential synapomorphies remain unclear. Future studies should try to identify nonDNA synapomorphies uniting Barbeyaceae with Dirachmaceae. Copyright © 2011 Elsevier Inc. All rights reserved.

A systematic mapping review of effective interventions for communicating with, supporting and providing information to parents of preterm infants.

Science.gov (United States)

Brett, Jo; Staniszewska, Sophie; Newburn, Mary; Jones, Nicola; Taylor, Lesley

2011-06-02

Background and objective The birth of a preterm infant can be an overwhelming experience of guilt, fear and helplessness for parents. Provision of interventions to support and engage parents in the care of their infant may improve outcomes for both the parents and the infant. The objective of this systematic review is to identify and map out effective interventions for communication with, supporting and providing information for parents of preterm infants. Design Systematic searches were conducted in the electronic databases Medline, Embase, PsychINFO, the Cochrane library, the Cumulative Index to Nursing and Allied Health Literature, Midwives Information and Resource Service, Health Management Information Consortium, and Health Management and Information Service. Hand-searching of reference lists and journals was conducted. Studies were included if they provided parent-reported outcomes of interventions relating to information, communication and/or support for parents of preterm infants prior to the birth, during care at the neonatal intensive care unit and after going home with their preterm infant. Titles and abstracts were read for relevance, and papers judged to meet inclusion criteria were included. Papers were data-extracted, their quality was assessed, and a narrative summary was conducted in line with the York Centre for Reviews and Dissemination guidelines. Studies reviewed Of the 72 papers identified, 19 papers were randomised controlled trials, 16 were cohort or quasi-experimental studies, and 37 were non-intervention studies. Results Interventions for supporting, communicating with, and providing information to parents that have had a premature infant are reported. Parents report feeling supported through individualised developmental and behavioural care programmes, through being taught behavioural assessment scales, and through breastfeeding, kangaroo-care and baby-massage programmes. Parents also felt supported through organised support groups and

FY2015 Lightweight Materials R&D Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-09-30

The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing lightweight materials for passenger and commercial vehicles. This report describes the progress made on the research and development projects funded by the Lightweight Materials area.

Support given to lecturers when providing mobile centric services in teaching and learning: a policy analysis perspective

CSIR Research Space (South Africa)

Chipangura, B

2015-05-01

Full Text Available The objective of this study is to examine the status of Higher Education Institutions (HEIs) policies in supporting lecturers when providing mobile centric services to students. The research was undertaken as a single case study within the Open...

Walking beam furnace provided with an apparatus for detecting the position of a material by the use of gamma rays

Energy Technology Data Exchange (ETDEWEB)

Tomita, F

1970-05-27

A material fed to the vicinity of an extraction port of a walking beam furnace is extracted by the arm of an extractor which is disposed outside the furnace and inserted into the furnace such that the material is placed on the arm. In order that the position of the material in the furnace immediately before the extraction may assume its predetermined condition, it is necessary to measure the material position with the detecting apparatus and to conduct precise positioning. Modulated light has been generally utilized for the measurement. In the prior art, the light is prone to be intercepted by atomized oil or on account of the incomplete combustion of fuel gas, and detector malfunctions often occur. This invention utilizes gamma rays, and measures the material position on the basis of the product between the density and thickness of the object to be detected. When the gamma rays are directed from the ceiling of the furnace perpendicularly towards the hearth, it is difficult to distinguish the material from scale which exfoliates from the material and which deposits on the hearth. When the gamma rays are directed horizontally from the side wall of the furnace, the accurate position of the material cannot be detected when the material is conveyed in the furnace in an inclined state. According to this invention, therefore, a gamma ray source is provided near the end of the ceiling wall of the furnace in the direction of the width, while a detector is provided near the lowermost part of the opposite side wall, so that the gamma rays are directed obliquely across the path of the material.

Providing support for day-to-day monitoring of shoreline cleanup operations

International Nuclear Information System (INIS)

Lamarche, A.; Tarpley, J.

1997-01-01

Experiences gained during the 'Cape Mohican' incident in October 1996, in San Francisco Bay, were recounted and proposed as a potential example of day-to-day monitoring, evaluation and reporting of shoreline cleanup effort. During this cleanup a set of communications procedures, progress reports and maps were developed which should be equally useful in other similar situations. The cartographic representations were specially highlighted as they focused on ways to provide a clear picture of the short term modifications in oiling conditions of the affected shoreline. The most important lesson learned from this oil spill was the importance of having personnel and equipment sufficiently matched to the task in order to evaluate oil conditions, produce cleanup recommendations, execute and communicate the status of the cleanup effort as fast, and as efficiently and effectively as possible. It was clearly demonstrated that unless the decision process is streamlined and supported with the best, most up-to-date information, the efforts of the cleanup team would be seriously undermined. 8 refs., 2 tabs., 6 figs

Sandia National Laboratories, California Hazardous Materials Management Program annual report.

Energy Technology Data Exchange (ETDEWEB)

Brynildson, Mark E.

2011-02-01

The annual program report provides detailed information about all aspects of the Sandia National Laboratories, California (SNL/CA) Hazardous Materials Management Program. It functions as supporting documentation to the SNL/CA Environmental Management System Program Manual. This program annual report describes the activities undertaken during the calender past year, and activities planned in future years to implement the Hazardous Materials Management Program, one of six programs that supports environmental management at SNL/CA.

Stress relaxation and creep of high-temperature gas-cooled reactor core support ceramic materials: a literature search

International Nuclear Information System (INIS)

Selle, J.E.; Tennery, V.J.

1980-05-01

Creep and stress relaxation in structural ceramics are important properties to the high-temperature design and safety analysis of the core support structure of the HTGR. The ability of the support structure to function for the lifetime of the reactor is directly related to the allowable creep strain and the ability of the structure to withstand thermal transients. The thermal-mechanical response of the core support pads to steady-state stresses and potential thermal transients depends on variables, including the ability of the ceramics to undergo some stress relaxation in relatively short times. Creep and stress relaxation phenomena in structural ceramics of interest were examined. Of the materials considered (fused silica, alumina, silicon nitride, and silicon carbide), alumina has been more extensively investigated in creep. Activation energies reported varied between 482 and 837 kJ/mole, and consequently, variations in the assigned mechanisms were noted. Nabarro-Herring creep is considered as the primary creep mechanism and no definite grain size dependence has been identified. Results for silicon nitride are in better agreement with reported activation energies. No creep data were found for fused silica or silicon carbide and no stress relaxation data were found for any of the candidate materials. While creep and stress relaxation are similar and it is theoretically possible to derive the value of one property when the other is known, no explicit demonstrated relationship exists between the two. For a given structural ceramic material, both properties must be experimentally determined to obtain the information necessary for use in high-temperature design and safety analyses

PREFER: a European service providing forest fire management support products

Science.gov (United States)

Eftychidis, George; Laneve, Giovanni; Ferrucci, Fabrizio; Sebastian Lopez, Ana; Lourenco, Louciano; Clandillon, Stephen; Tampellini, Lucia; Hirn, Barbara; Diagourtas, Dimitris; Leventakis, George

2015-06-01

PREFER is a Copernicus project of the EC-FP7 program which aims developing spatial information products that may support fire prevention and burned areas restoration decisions and establish a relevant web-based regional service for making these products available to fire management stakeholders. The service focuses to the Mediterranean region, where fire risk is high and damages from wildfires are quite important, and develop its products for pilot areas located in Spain, Portugal, Italy, France and Greece. PREFER aims to allow fire managers to have access to online resources, which shall facilitate fire prevention measures, fire hazard and risk assessment, estimation of fire impact and damages caused by wildfire as well as support monitoring of post-fire regeneration and vegetation recovery. It makes use of a variety of products delivered by space borne sensors and develop seasonal and daily products using multi-payload, multi-scale and multi-temporal analysis of EO data. The PREFER Service portfolio consists of two main suite of products. The first refers to mapping products for supporting decisions concerning the Preparedness/Prevention Phase (ISP Service). The service delivers Fuel, Hazard and Fire risk maps for this purpose. Furthermore the PREFER portfolio includes Post-fire vegetation recovery, burn scar maps, damage severity and 3D fire damage assessment products in order to support relative assessments required in context of the Recovery/Reconstruction Phase (ISR Service) of fire management.

Fracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials

Directory of Open Access Journals (Sweden)

Vahideh Nazari

2017-01-01

Full Text Available Objectives: Fracture strength is an important factor influencing the clinical long-term success of implant-supported prostheses especially in high stress situations like excessive crown height space (CHS. The purpose of this study was to compare the fracture strength of implant-supported fixed partial dentures (FPDs with excessive crown height, fabricated from three different materials.Materials and Methods: Two implants with corresponding abutments were mounted in a metal model that simulated mandibular second premolar and second molar. Thirty 3-unit frameworks with supportive anatomical design were fabricated using zirconia, nickel-chromium alloy (Ni-Cr, and polyetheretherketone (PEEK (n=10. After veneering, the CHS was equal to 15mm. Then; samples were axially loaded on the center of pontics until fracture in a universal testing machine at a crosshead speed of 0.5 mm/minute. The failure load data were analyzed by one-way ANOVA and Games-Howell tests at significance level of 0.05.Results: The mean failure loads for zirconia, Ni-Cr and PEEK restorations were 2086±362N, 5591±1200N and 1430±262N, respectively. There were significant differences in the mean failure loads of the three groups (P<0.001. The fracture modes in zirconia, metal ceramic and PEEK restorations were cohesive, mixed and adhesive type, respectively.Conclusions: According to the findings of this study, all implant supported three-unit FPDs fabricated of zirconia, metal ceramic and PEEK materials are capable to withstand bite force (even para-functions in the molar region with excessive CHS.Keywords: Dental Implants; Polyetheretherketone; Zirconium oxide; Dental Restoration Failure; Dental Porcelain

The Schwartz Center Rounds: evaluation of an interdisciplinary approach to enhancing patient-centered communication, teamwork, and provider support.

Science.gov (United States)

Lown, Beth A; Manning, Colleen F

2010-06-01

To assess the impact of Schwartz Center Rounds, an interdisciplinary forum where attendees discuss psychosocial and emotional aspects of patient care. The authors investigated changes in attendees' self-reported behaviors and beliefs about patient care, sense of teamwork, stress, and personal support. In 2006-2007, researchers conducted retrospective surveys of attendees at six sites offering Schwartz Center Rounds ("the Rounds") for > or =3 years and prospective surveys of attendees at 10 new Rounds sites that have held > or =7 Rounds. Most of the retrospective survey respondents indicated that attending Rounds enhanced their likelihood of attending to psychosocial and emotional aspects of care and enhanced their beliefs about the importance of empathy. Respondents reported better teamwork, including heightened appreciation of the roles and contributions of colleagues. There were significant decreases in perceived stress (P teamwork (both: P communication, teamwork, and provider support. The impact on measured outcomes increased with the number of Rounds attended. The Rounds represent an effective strategy for providing support to health care professionals and for enhancing relationships among them and with their patients.

18 CFR 347.1 - Material to support request for newly established or changed property account depreciation studies.

Science.gov (United States)

2010-04-01

... request for newly established or changed property account depreciation studies. 347.1 Section 347.1... REGULATIONS UNDER THE INTERSTATE COMMERCE ACT OIL PIPELINE DEPRECIATION STUDIES § 347.1 Material to support request for newly established or changed property account depreciation studies. (a) Means of filing...

Materials challenges supporting new sodium fast reactor designs

International Nuclear Information System (INIS)

Gelineau, O.; Goff, S. Dubiez-le; Dubuisson, Ph.; Dalle, F.; Blat, M.

2009-01-01

Sodium Fast Reactor is considered in France as the most mature technology of the different Generation IV systems. In the short-term the designing work is focused on the identification of the potential tracks to improve competitiveness, safety, efficiency and to reduce cost. In that frame the materials have a key role to play. This paper is focused on the new materials envisaged and on the Research and Development program launched in France by Areva NP, CEA and EDF in order to sustain the innovative design options: ferritic steels as candidates for exchangers, steam generators and possibly sodium circuits, optimization of materials and fabrication processes to improve safety and risk management, extension of material databases to take into account the 60 years life duration including irradiation and ageing effect. (author)

Occupational Health and Safety. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with occupational safety and…

Empirical Analysis of Social Support Provided via Social Media

NARCIS (Netherlands)

Medeiros, L.; Bosse, T.

2016-01-01

Social media are an effective means for people to share everyday problems with their peers. Although this often leads to empathic responses which help alleviate the experienced stress, such peer support is not always available. As an alternative solution for such situations, this paper explores the

Seminar Cum Meeting Report: Codata Task Group for Exchangeable Material Data Representation to Support Research and Education

Directory of Open Access Journals (Sweden)

T Ashino

2008-11-01

Full Text Available On March 4-5, 2008, the CODATA Task Group for Exchangeable Material Data Representation to Support Research and Education held a two day seminar cum meeting at the National Physical Laboratory (NPL, New Delhi, India, with NPL materials researchers and task group members representing material activities and databases from seven countries: European Union (The Czech Republic, France, and the Netherlands, India, Korea, Japan, and the United States. The NPL seminar included presentations about the researchers' work. The Task Group meeting included presentations about current data related activities of the members. Joint discussions between NPL researchers and CODATA task group members began an exchange of viewpoints among materials data producers, users, and databases developers. The seminar cum meeting included plans to continue and expand Task Group activities at the 2008 CODATA 21st Meeting in Kyiv, Ukraine.

Social support in the practices of informal providers: The case of patent and proprietary medicine vendors in Nigeria.

Science.gov (United States)

Sieverding, Maia; Liu, Jenny; Beyeler, Naomi

2015-10-01

The social and institutional environments in which informal healthcare providers operate shape their health and business practices, particularly in contexts where regulatory enforcement is weak. In this study, we adopt a social capital perspective to understanding the social networks on which proprietary and patent medicine vendors (PPMVs) in Nigeria rely for support in the operation of their shops. Data are drawn from 70 in-depth interviews with PPMVs in three states, including interviews with local leaders of the PPMV professional association. We find that PPMVs primarily relied on more senior colleagues and formal healthcare professionals for informational support, including information about new medicines and advice on how to treat specific cases of illness. For instrumental support, including finance, start-up assistance, and intervention with regulatory agencies, PPMVs relied on extended family, the PPMVs with whom they apprenticed, and the leaders of their professional association. PPMVs' networks also provided continual reinforcement of what constitutes good PPMV practice through admonishments to follow scope of practice limitations. These informal reminders, as well as monitoring activities conducted by the professional association, served to reinforce PPMVs' concern with avoiding negative customer health outcomes, which were perceived to be detrimental to their business reputations. That PPMVs' networks both encouraged practices to reduce the likelihood of poor health outcomes, and provided advice regarding customers' health conditions, highlights the potential impact of informal providers' access to different forms of social capital on their delivery of health services, as well as their success as microenterprises. Copyright © 2015 Elsevier Ltd. All rights reserved.

Physicochemical characteristics of the coconut pulp (Acrocomia aculeata) for use as support of proteins and metal material

Energy Technology Data Exchange (ETDEWEB)

Yubero, F.; Ayala, J.; Lopez, M.; Valdovinos, V.; Monteiro, M.; Gonzalez, Y., E-mail: fyubero@qui.una.py [National University of Asunción (Paraguay); Thompson, W. [Universidade Estadual de Londrina (UEL), PR (Brazil). Departamento de Fisica; Arguello, J. [Universidade Federal do Rio Grande do Sul (UFRGS), RS (Brazil). Instituto de Quimica

2016-07-01

The fruit of the Acrocomia aculeata, native palm tree typical of the tropical region, is exploited mainly for the manufacture of oils and animal consumption. This study was aimed to determine the physicochemical characteristics of the residue of the Acrocomia aculeata coconut pulp in order to apply it in the development of new materials. Therefore fruits collected for the production of pulp were drying and pulverized, the chemical and mineral compositions were studied by GAFTA standardized techniques for the analysis of crude fiber, protein, fat and calories and INAA respectively. Subsequently, the initial material was chemically modified and assessed the solubilities of the native material and the obtained modified material proving to be completely insoluble in solvents organic and aqueous (water, ethanol, terbutanol, isobutanol and hexane), the materials were analyzed by IR with Transformed Fourier and the results showed the existence of changes in the double link lengthening conjugated and aromatic; and link double nitrogen C=N/N=O. EPR analysis indicated that the materials obtained are not paramagnetic at room temperature, however can incorporate magnetite and Fe{sup 0}. These preliminary studies concluded that this eco material could be applied as support of proteins and metals. (author)

Physicochemical characteristics of the coconut pulp (Acrocomia aculeata) for use as support of proteins and metal material

International Nuclear Information System (INIS)

Yubero, F.; Ayala, J.; Lopez, M.; Valdovinos, V.; Monteiro, M.; Gonzalez, Y.; Thompson, W.; Arguello, J.

2016-01-01

The fruit of the Acrocomia aculeata, native palm tree typical of the tropical region, is exploited mainly for the manufacture of oils and animal consumption. This study was aimed to determine the physicochemical characteristics of the residue of the Acrocomia aculeata coconut pulp in order to apply it in the development of new materials. Therefore fruits collected for the production of pulp were drying and pulverized, the chemical and mineral compositions were studied by GAFTA standardized techniques for the analysis of crude fiber, protein, fat and calories and INAA respectively. Subsequently, the initial material was chemically modified and assessed the solubilities of the native material and the obtained modified material proving to be completely insoluble in solvents organic and aqueous (water, ethanol, terbutanol, isobutanol and hexane), the materials were analyzed by IR with Transformed Fourier and the results showed the existence of changes in the double link lengthening conjugated and aromatic; and link double nitrogen C=N/N=O. EPR analysis indicated that the materials obtained are not paramagnetic at room temperature, however can incorporate magnetite and Fe 0 . These preliminary studies concluded that this eco material could be applied as support of proteins and metals. (author)

Supporting PECO countries in combating illicit trafficking of nuclear materials - Status of ongoing projects

International Nuclear Information System (INIS)

Janssens, W.; Daures, P.; Cromboom, O.; Mayer, K.; Koch, L.

2001-01-01

Full text: In order to support the development of an efficient and validated response to counteract illicit trafficking of nuclear materials in the EU, the candidate countries and some CIS countries, ITU is currently executing a series of dedicated projects with the Candidate Countries to the European Union, based upon the experience gained in previous Phare and Tacis projects. Following the recommendations of the International Technical Working Group (ITWG), the objectives of the projects are: assessment of the national situation during a fact-finding mission in the country; technical upgrade and/or training related to the categorisation of nuclear material on the spot and assistance for the identification of seized nuclear material, through joint analysis at ITU; implementation of the recommended Model Action Plan in the form of a national handbook called RITNUM (Response to Illicit Trafficking of NUclear Material); validation of the national Model Action Plan by the organisation of a demonstration exercise in the country involving all the identified services in the field. After a kick-off meeting held in Karlsruhe in November 2000 and attended by two participants of each country, 5 fact-finding missions have been already performed (Romania, Slovenia and the three Baltic States). A general meeting with all the involved parties (Customs, Police, Intelligence services. Health Physics, Nuclear reference laboratory...) was organised to describe the procedure of the integrated response and the national needs were assessed. The corresponding training sessions are planed in January 2002 at ITU for three participants for each country (Customs and Police officer and high level scientist dealing with nuclear measurements). This training session will be organised and supported by IAEA which have a common interest through its Regional Program on Combating Illicit Trafficking (RER60). This joint action will be extended to other eastern countries (ex. Belarus) on IAEA request

Radiation dose assessments to support evaluations of radiological control levels for recycling or reuse of materials and equipment

Energy Technology Data Exchange (ETDEWEB)

Hill, R.L.; Aaberg, R.L.; Baker, D.A.; Kennedy, W.E. Jr.

1995-07-01

Pacific Northwest Laboratory is providing Environmental Protection Support and Assistance to the USDOE, Office of Environmental Guidance. Air, Water, and Radiation Division. As part of this effort, PNL is collecting data and conducting technical evaluations to support DOE analyses of the feasibility of developing radiological control levels for recycling or reuse of metals, concrete, or equipment containing residual radioactive contamination from DOE operations. The radiological control levels will be risk-based, as developed through a radiation exposure scenario and pathway analysis. The analysis will include evaluation of relevant radionuclides, potential mechanisms of exposure, and both health and non-health-related impacts. The main objective of this report is to develop a methodology for establishing radiological control levels for recycle or reuse. This report provides the results of the radiation exposure scenario and pathway analyses for 42 key radionuclides generated during DOE operations that may be contained in metals or equipment considered for either recycling or reuse. The scenarios and information developed by the IAEA. Application of Exemption Principles to the Recycle and Reuse of Materials from Nuclear Facilities, are used as the initial basis for this study. The analyses were performed for both selected worker populations at metal smelters and for the public downwind of a smelter facility. Doses to the public downwind were estimated using the US (EPA) CAP88-PC computer code with generic data on atmospheric dispersion and population density. Potential non-health-related effects of residual activity on electronics and on film were also analyzed.

Radiation dose assessments to support evaluations of radiological control levels for recycling or reuse of materials and equipment

International Nuclear Information System (INIS)

Hill, R.L.; Aaberg, R.L.; Baker, D.A.; Kennedy, W.E. Jr.

1995-07-01

Pacific Northwest Laboratory is providing Environmental Protection Support and Assistance to the USDOE, Office of Environmental Guidance. Air, Water, and Radiation Division. As part of this effort, PNL is collecting data and conducting technical evaluations to support DOE analyses of the feasibility of developing radiological control levels for recycling or reuse of metals, concrete, or equipment containing residual radioactive contamination from DOE operations. The radiological control levels will be risk-based, as developed through a radiation exposure scenario and pathway analysis. The analysis will include evaluation of relevant radionuclides, potential mechanisms of exposure, and both health and non-health-related impacts. The main objective of this report is to develop a methodology for establishing radiological control levels for recycle or reuse. This report provides the results of the radiation exposure scenario and pathway analyses for 42 key radionuclides generated during DOE operations that may be contained in metals or equipment considered for either recycling or reuse. The scenarios and information developed by the IAEA. Application of Exemption Principles to the Recycle and Reuse of Materials from Nuclear Facilities, are used as the initial basis for this study. The analyses were performed for both selected worker populations at metal smelters and for the public downwind of a smelter facility. Doses to the public downwind were estimated using the US (EPA) CAP88-PC computer code with generic data on atmospheric dispersion and population density. Potential non-health-related effects of residual activity on electronics and on film were also analyzed

REMOTE MATERIAL HANDLING IN THE YUCCA MOUNTAIN WASTE PACKAGE CLOSURE CELL AND SUPPORT AREA GLOVEBOX

International Nuclear Information System (INIS)

K.M. Croft; S.M. Allen; M.W. Borland

2005-01-01

The Yucca Mountain Waste Package Closure System (WPCS) cells provide for shielding of highly radioactive materials contained in unsealed waste packages. The purpose of the cells is to provide safe environments for package handling and sealing operations. Once sealed, the packages are placed in the Yucca Mountain Repository. Closure of a typical waste package involves a number of remote operations. Those involved typically include the placement of matched lids onto the waste package. The lids are then individually sealed to the waste package by welding. Currently, the waste package includes three lids. One lid is placed before movement of the waste package to the closure cell; the final two are placed inside the closure cell, where they are welded to the waste package. These and other important operations require considerable remote material handling within the cell environment. This paper discusses the remote material handling equipment, designs, functions, operations, and maintenance, relative to waste package closure

Characterization of tube support alloys

International Nuclear Information System (INIS)

Vaia, A.R.

1985-01-01

The involvement and relationship of carbon steel corrosion products in the tube denting phenomenon promoted an intensive research effort to: 1) understand, reproduce, and arrest the denting process, and 2) evaluate alternative tube support materials to provide additional corrosion resistance. The paper summarizes a corrosion testing program for the verification of type 405 stainless steel under acid or all volatile treatment conditions

Database 'catalogue of techniques applied to materials and products of nuclear engineering'

International Nuclear Information System (INIS)

Lebedeva, E.E.; Golovanov, V.N.; Podkopayeva, I.A.; Temnoyeva, T.A.

2002-01-01

The database 'Catalogue of techniques applied to materials and products of nuclear engineering' (IS MERI) was developed to provide informational support for SSC RF RIAR and other enterprises in scientific investigations. This database contains information on the techniques used at RF Minatom enterprises for reactor material properties investigation. The main purpose of this system consists in the assessment of the current status of the reactor material science experimental base for the further planning of experimental activities and methodical support improvement. (author)

Providing Students with Interdisciplinary Support to Improve Their Organic Chemistry Posters

Science.gov (United States)

Widanski, Bozena; Thompson, Jo Ann; Foran-Mulcahy, Katie; Abafo, Amy

2016-01-01

A two-semester-long interdisciplinary support effort to improve student posters in organic chemistry lab is described. In the first semester, students' literature search report is supported by a workshop conducted by an Instruction Librarian. During the subsequent semester, a second workshop is presented by the Instruction Librarian, an English…

Reframing cooperation: Challenges in overcoming tensions between professional services and volunteer organizations providing parenting support in immigrant communities

NARCIS (Netherlands)

Ponzoni, E.

2015-01-01

Volunteer organizations can potentially partner with mainstream professional services to provide better parenting support to immigrant parents. This qualitative study of cooperation between professional agencies and volunteer organizations known as migrant volunteer and community organizations

Radwaste Decision Support System

International Nuclear Information System (INIS)

Westrom, G.; Vance, J.N.; Gelhaus, F.E.

1989-01-01

The purpose of the Radwaste Decision Support System (RDSS) is to provide expert advice, analysis results and instructional material relative to the treatment, handling, transport and disposal of low-level radioactive waste produced in nuclear power plants. This functional specification addresses the following topics: Functions of the RDSS, Relationships and interfaces between the function, Development of the decisions and logic tree structures embodied in waste management, Elements of the database and the characteristics required to support the decision-making process, Specific User requirements for the RDSS, Development of the user interface, Basic software architecture, and Concepts for the RDSS usage including updating and maintenance

Promoting Ethylene Selectivity from CO2 Electroreduction on CuO Supported onto CO2 Capture Materials.

Science.gov (United States)

Yang, Hui-Juan; Yang, Hong; Hong, Yu-Hao; Zhang, Peng-Yang; Wang, Tao; Chen, Li-Na; Zhang, Feng-Yang; Wu, Qi-Hui; Tian, Na; Zhou, Zhi-You; Sun, Shi-Gang

2018-03-09

Cu is a unique catalyst for CO 2 electroreduction, since it can catalyze CO 2 reduction to a series of hydrocarbons, alcohols, and carboxylic acids. Nevertheless, such Cu catalysts suffer from poor selectivity. High pressure of CO 2 is considered to facilitate the activity and selectivity of CO 2 reduction. Herein, a new strategy is presented for CO 2 reduction with improved C 2 H 4 selectivity on a Cu catalyst by using CO 2 capture materials as the support at ambient pressure. N-doped carbon (N x C) was synthesized through high-temperature carbonization of melamine and l-lysine. We observed that the CO 2 uptake capacity of N x C depends on both the microporous area and the content of pyridinic N species, which can be controlled by the carbonization temperature (600-800 °C). The as-prepared CuO/N x C catalysts exhibit a considerably higher C 2 H 4 faradaic efficiency (36 %) than CuO supported on XC-72 carbon black (19 %), or unsupported CuO (20 %). Moreover, there is a good linear relationship between the C 2 H 4 faradaic efficiency and CO 2 uptake capacity of the supports for CuO. The local high CO 2 concentration near Cu catalysts, created by CO 2 capture materials, was proposed to increase the coverage of CO intermediate, which is favorable for the coupling of two CO units in the formation of C 2 H 4 . This study demonstrates that pairing Cu catalysts with CO 2 capture supports is a promising approach for designing highly effective CO 2 reduction electrocatalysts. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Material Substitution For The Supporting Frame of Power Tiller With Finite Element Analysis Approach

Directory of Open Access Journals (Sweden)

Midian Shite

2006-08-01

Full Text Available Due to its advantageouse characteristic, aluminum is considered to substitute the existing steel as material of the supporting frame of power tiller to meet the strength and environment concerns. The investigation was emphasized on the comparison of both material in view of stress and deformation. In this study, both experimental test and finite element (FE analysis were employed to meet the research concem.comparison between the experimental test and numerical analysis result indicated acceptable differnces of about 7-33% wich is lower than the previouse research. Substitution with aluminum was confirmed using material index that aluminum has better performance in strength and stiffness than that of steel by prescibing minimum better performance in strength and stiffness than that of steel by prescibing minimum weight. FE analysis result revealed that aluminum model was capable of sustaining loads about equal to the steel model. It was based on its maximum von Mises stress wich was insignificatly lower than the steel model. In term of strength characteristic, strength ratio of the aluminum model was higher than the steel model. Furthemore, the substitution also resulted in redistrubuting stress into wider area and mass reduction for about 36%.

Supporting the material control and accountancy system with physical protection system features

International Nuclear Information System (INIS)

Miyoshi, D.S.; Olson, C.E.; Caskey, D.L.

1984-01-01

Most physical security functions can be accomplished by a range of alternative features. Careful design can provide comparable levels of security regardless of which option is chosen, albeit with possible differences in cost and efficiency. However, the effectiveness and especially the cost and efficiency of the material control and accounting system may be strongly influenced by the selection of a particular design approach to physical security. In this paper, a series of examples are cited to illustrate the effects that particular physical protection design choices may have. The examples have been chosen from several systems engineering projects at facilities within the DOE nuclear community. These examples are generalized, and a series of design principles are proposed for integrating physical security with material control and accounting by appropriate selection of alternative features. 2 references, 6 figures

Numerical evaluation of micro-structural parameters of porous supports in metal-supported solid oxide fuel cells

DEFF Research Database (Denmark)

Reiss, Georg; Frandsen, Henrik Lund; Brandstätter, Wilhelm

2014-01-01

Metallic supported Solid Oxide Fuel Cells (SOFCs) are considered as a durable and cost effective alternative to the state-of-the-art ceramic supported cell designs. In order to understand the mass and charge transport in the metal-support of this new type of cell a novel technique involving X......-ray tomography and micro-structural modelling is presented in this work. The simulation technique comprises a novel treatment of the boundary conditions, which leads to more accurate effective transport parameters compared to those, which can be achieved with the conventional homogenisation procedures....... Furthermore, the porosity distribution in the metal-support was determined, which provided information about the inhomogeneous nature of the material. In addition to that, transport parameters for two identified, different dense layers of the metal-support are evaluated separately. The results...

Providing Data Management Support to NASA Airborne Field Studies through Streamlined Usability Design

Science.gov (United States)

Beach, A. L., III; Northup, E. A.; Early, A. B.; Chen, G.

2016-12-01

Airborne field studies are an effective way to gain a detailed understanding of atmospheric processes for scientific research on climate change and air quality relevant issues. One major function of airborne project data management is to maintain seamless data access within the science team. This allows individual instrument principal investigators (PIs) to process and validate their own data, which requires analysis of data sets from other PIs (or instruments). The project's web platform streamlines data ingest, distribution processes, and data format validation. In May 2016, the NASA Langley Research Center (LaRC) Atmospheric Science Data Center (ASDC) developed a new data management capability to help support the Korea U.S.-Air Quality (KORUS-AQ) science team. This effort is aimed at providing direct NASA Distributed Active Archive Center (DAAC) support to an airborne field study. Working closely with the science team, the ASDC developed a scalable architecture that allows investigators to easily upload and distribute their data and documentation within a secure collaborative environment. The user interface leverages modern design elements to intuitively guide the PI through each step of the data management process. In addition, the new framework creates an abstraction layer between how the data files are stored and how the data itself is organized(i.e. grouping files by PI). This approach makes it easy for PIs to simply transfer their data to one directory, while the system itself can automatically group/sort data as needed. Moreover, the platform is "server agnostic" to a certain degree, making deployment and customization more straightforward as hardware needs change. This flexible design will improve development efficiency and can be leveraged for future field campaigns. This presentation will examine the KORUS-AQ data portal as a scalable solution that applies consistent and intuitive usability design practices to support ingest and management of airborne

The role of integrated logistic support in performance assessment of nuclear facilities

International Nuclear Information System (INIS)

Prager, G.; Munro, J.F.

1988-01-01

Integrated logistic support (ILS) is a process used extensively by the Department of Defense as the major tool for weapons systems readiness and support-ability. ILS provides a proven scientific and engineering method for defining system support requirements while acquiring necessary support. ILS is also the management process for planning, programming and integrating support-ability considerations into the acquisition and operations process. Concurrent with the acquisition of material support requirements are identified, planned, evaluated, acquired and installed

Radioactive materials transporting container and vehicles

International Nuclear Information System (INIS)

Reese, S.L.

1980-01-01

A container and vehicle therefor for transporting radioactive materials is provided. The container utilizes a removable system of heat conducting fins made of a light weight highly heat conductive metal, such as aluminum or aluminum alloys. This permits a substantial reduction in the weight of the container during transport, increases the heat dissipation capability of the container and substantially reduces the scrubbing operation after loading and before unloading the radioactive material from the container. The vehicle utilizes only a pair of horizontal side beams interconnecting a pair of yoke members to support the container and provide the necessary strength and safety with a minimum of weight

Titanium Dioxide Supported on Different Porous Materials as Photocatalyst for the Degradation of Methyl Green in Wastewaters

Directory of Open Access Journals (Sweden)

Haithem Bel Hadjltaief

2015-01-01

Full Text Available TiO2 nanoparticles were immobilized on two porous materials used as catalyst supports, namely, activated carbon (AC and natural clay (NC, through an impregnation process using TiO2 (P25 as precursor. The so-prepared composite materials were characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM, transition electron microscopy (TEM, and nitrogen physisorption, that is, Brunauer-Emmett-Teller (BET surface area determination. SEM and TEM observation evidenced that TiO2 was deposited on AC and NC surface. XRD results confirmed that TiO2 existed in a mixture of anatase and rutile phases. The specific surface area of photocatalysts decreased drastically in comparison with the original materials. The photocatalytic activity of these materials was assayed in the oxidation of Methyl Green (MG dye in aqueous medium under UV irradiation. TiO2/AC exhibited higher photocatalytic oxidation activity than TiO2 at neutral pH. Total mineralization of MG was confirmed by means of COD analysis, pointing to these materials as an efficient, cost-effective, and environment friendly alternative for water treatment.

Project Quality Assurance Plan for research and development services provided by Oak Ridge National Laboratory in support of the Westinghouse Materials Company of Ohio Operable Unit 1 Stabilization Development and Treatability Studies Program

Energy Technology Data Exchange (ETDEWEB)

Gilliam, T.M.

1991-05-01

This Project Quality Assurance Plan (PQAP) sets forth the quality assurance (QA) requirements that are applied to those elements of the Westinghouse Materials Company of Ohio (WMCO) Operable Unit 1 support at Oak Ridge National Laboratory (ORNL) project that involve research and development (R D) performed at ORNL. This is in compliance with the applicable criteria of 10 CFR Part 50, Appendix B, ANSI/ASME NQA-1, as specified by Department of Energy (DOE) Oak Ridge Operations (ORO) Order 5700.6B. For this application, NQA-1 is the core QA Program requirements document. QA policy, normally found in the requirements document, is contained herein. The requirements of this PQAP apply to project activities that affect the quality and reliability/credibility of research, development, and investigative data and documentation. These activities include the functions of attaining quality objectives and assuring that an appropriate QA program scope is established. The scope of activities affecting quality includes organization; personnel training and qualifications; design control; procurement; material handling and storage; operating procedures; testing, surveillance, and auditing; R D investigative activities and documentation; deficiencies; corrective actions; and QA record keeping. 12 figs.

SupportNet for Frontline Behavioral Health Providers

Science.gov (United States)

2013-07-01

such as self-efficacy, more in individualistic cultures (typically Western countries) than in collectivistic cultures (typically Eastern European...were invariant across the 2 studies, which indicated that the STSE Scale may be a culturally unbiased instrument. Keywords: secondary traumatic...the STSE Scale among workers providing services to traumatized civilian population within a different cultural context (in Poland). Extending the

Paraffin scintillator for radioassay of solid support samples

International Nuclear Information System (INIS)

Fujii, Haruo; Takiue, Makoto

1989-01-01

A new paraffin scintillator used for solid support sample counting has been proposed, and its composition and various characteristics are described. The solid support sample treated with this scintillator can be easily handled because of rigid sample conditions. This technique provides great advantages such as the elimination of a large volume of scintillator and little radioactive waste material by using an economical polyethylene bag instead of the conventional counting vial. (author)

Materials Science Research Rack Onboard the International Space Station

Science.gov (United States)

Reagan, Shawn; Frazier, Natalie; Lehman, John

2016-01-01

The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and ESA for materials science investigations on the International Space Station (ISS). MSRR was launched on STS-128 in August 2009 and currently resides in the U.S. Destiny Laboratory Module. Since that time, MSRR has logged more than 1400 hours of operating time. The MSRR accommodates advanced investigations in the microgravity environment on the ISS for basic materials science research in areas such as solidification of metals and alloys. The purpose is to advance the scientific understanding of materials processing as affected by microgravity and to gain insight into the physical behavior of materials processing. MSRR allows for the study of a variety of materials, including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. The NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA-developed Materials Science Laboratory (MSL) that accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400?C. ESA continues to develop samples with 14 planned for launch and processing in the near future. Additionally NASA has begun developing SCAs to

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA.

Science.gov (United States)

Qamheya, Ala Hassan A; Yeniyol, Sinem; Arısan, Volkan

2015-01-01

Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC) material in teeth construction to rehabilitate a complete denture wearer patient.

Failure of structural elements made of polymer supported composite materials during the multiyear natural aging

Science.gov (United States)

Blinkov, Pavel; Ogorodov, Leonid; Grabovyy, Peter

2018-03-01

Modern high-rise construction introduces a number of limitations and tasks. In addition to durability, comfort and profitability, projects should take into account energy efficiency and environmental problems. Polymer building materials are used as substitutes for materials such as brick, concrete, metal, wood and glass, and in addition to traditional materials. Plastic materials are light, can be formed into complex shapes, durable and low, and also possess a wide range of properties. Plastic materials are available in various forms, colors and textures and require minimal or no color. They are resistant to heat transfer and diffusion of moisture and do not suffer from metal corrosion or microbial attack. Polymeric materials, including thermoplastics, thermoset materials and wood-polymer composites, have many structural and non-structural applications in the construction industry. They provide unique and innovative solutions at a low cost, and their use is likely to grow in the future. A number of polymer composite materials form complex material compositions, which are applied in the construction in order to analyze the processes of damage accumulation under the conditions of complex nonstationary loading modes, and to determine the life of structural elements considering the material aging. This paper present the results of tests on short-term compression loading with a deformation rate of v = 2 mm/min using composite samples of various shapes and sizes.

Detection of heat abduction on the walls by artificial neural network and selection of materials with decision support system

Directory of Open Access Journals (Sweden)

Egemen Tekkanat

2017-08-01

Full Text Available Today energy conservation is a very important issue in the world and Turkey. The aim of this study is to minimize the heat abduction, thus to save energy by utilizing the factors to prevent the heat abduction on the walls of buildings. First of all, a back-propagation network model with artificial neural network model was used for the factors that can cause heat loss on the walls. Whether the walls have insulation were considered. After that, Decision Support Systems were used for heat insulation to select the appropriate materials. A Decision Support Model with Analytic Hierarchy Process (AHP was recommended to meet the needs of a customer best and to make better decisions for the selection of the materials. The method was used by construction firms for their decision processes for the best materials and the results were evaluated. After the evaluations were done, the factors that cause heat loss were considered and it became clear which factors were more important for the prevention of heat loss.

An investigation into carbon nanostructured materials as catalyst support in proton exchange membrane fuel cells

DEFF Research Database (Denmark)

Veltzé, Sune

acid treatment on the Vapour Grown Carbon Fibers™ manufactured by Showa Denko K. K. From these fibres, twelve platinised samples were investigated, of which one was platinised by a platinum phtalocyanine impregnation method, two were platinised by the polyol method and the remaining by the Bönnemann......Polymer electrolyte fuel cells (PEFCs) are among the key research areas concerning clean cost-effective energy. Carbon nano fibres (CNF), single walled carbon nano tubes (SWCNT), multi walled carbon nano tubes (MWCNT) and other related materials are among the possible successors to standard carbon...... black support materials for low platinum containing electrocatalyst. This is partly due to their high electronic conductivity. Partly due to their high surface area needed for the dispersion of nanoparticulate metal-clusters. In addition carbon nano-structures (CNF, SWCNT, MWCNT etc.) are more durable...

Nonreciprocal Thermal Material by Spatiotemporal Modulation

Science.gov (United States)

Torrent, Daniel; Poncelet, Olivier; Batsale, Jean-Chirstophe

2018-03-01

The thermal properties of a material with a spatiotemporal modulation, in the form of a traveling wave, in both the thermal conductivity and the specific heat capacity are studied. It is found that these materials behave as materials with an internal convectionlike term that provides them with nonreciprocal properties, in the sense that the heat flux has different properties when it propagates in the same direction or in the opposite one to the modulation of the parameters. An effective medium description is presented which accurately describes the modulated material, and numerical simulations support this description and verify the nonreciprocal properties of the material. It is found that these materials are promising candidates for the design of thermal diodes and other advanced devices for the control of the heat flow at all scales.

Establishing a National Nuclear Security Support Centre

International Nuclear Information System (INIS)

2014-02-01

The responsibility for creating and sustaining a nuclear security regime for the protection of nuclear and other radiological material clearly belongs to the State. The nuclear security regime resembles the layers of an onion, with the equipment and personnel securing the borders and ports representing the outer layer, and nuclear power, research reactors and nuclear medicine facilities representing the inner layers, and the actual target material representing the core. Components of any nuclear security regime include not only technological systems, but the human resources needed to manage, operate, administer and maintain equipment, including hardware and software. This publication provides practical guidance on the establishment and maintenance of a national nuclear security support centre (NSSC) as a means to ensure nuclear security sustainability in a State. An NSSC's basic purpose is to provide a national focal point for passing ownership of nuclear security knowledge and associated technical skills to the competent authorities involved in nuclear security. It describes processes and methodologies that can be used by a State to analyse the essential elements of information in a manner that allows several aspects of long term, systemic sustainability of nuclear security to be addressed. Processes such as the systematic approach to training, sometimes referred to as instructional system design, are the cornerstone of the NSSC concept. Proper analysis can provide States with data on the number of personnel requiring training and instructors needed, scale and scope of training, technical and scientific support venues, and details on the type and number of training aids or simulators required so that operational systems are not compromised in any way. Specific regulatory guidance, equipment or technology lists, or specifications/design of protection systems are not included in this publication. For such details, the following IAEA publications should be consulted

Flexible and self-powered temperature-pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials

Science.gov (United States)

Zhang, Fengjiao; Zang, Yaping; Huang, Dazhen; di, Chong-An; Zhu, Daoben

2015-09-01

Skin-like temperature- and pressure-sensing capabilities are essential features for the next generation of artificial intelligent products. Previous studies of e-skin and smart elements have focused on flexible pressure sensors, whereas the simultaneous and sensitive detection of temperature and pressure with a single device remains a challenge. Here we report developing flexible dual-parameter temperature-pressure sensors based on microstructure-frame-supported organic thermoelectric (MFSOTE) materials. The effective transduction of temperature and pressure stimuli into two independent electrical signals permits the instantaneous sensing of temperature and pressure with an accurate temperature resolution of cost and large-area fabrication, make MFSOTE materials possess promising applications in e-skin and health-monitoring elements.

Considering Materials Management in Construction: An Exploratory Study

Directory of Open Access Journals (Sweden)

Zakaria Dakhli

2018-03-01

Full Text Available While materials count for a considerable amount of construction costs, the way materials are managed seems to be improvised rather than approached methodically. This study investigates the practice of novel techniques used to manage materials in the construction industry. Techniques that have already proven themselves to be efficient ways to manage the production pace within the industry include the pull system, Just-In-Time, Kitting and off-site fabrication. These are explained and assessed in the context of the French construction industry through an exploratory study, supported by a questionnaire completed by contractors. The results reveal that a clear plan to manage materials on-site is lacking among the respondents, creating common inventory problems. This research provides evidence to support the central role played by an efficient management of material flow on-site. It also highlights the obstacles that hinder the adoption of innovative techniques, such as sub-contractor coordination.

Microstructural characterization of material used as supporter in pre hispanic paints

International Nuclear Information System (INIS)

Silva V, Y.; Zorrilla, C.; Canetas, J.; Hernandez, R.; Aguilar F, M.; Arenas A, J.; Martinez, G.

2005-01-01

The aim of this work is to show the characterization of pre hispanic paintings mainly of the materials that support the pigments. The samples come from three different archaeological sites, Palenque-Chiapas (two specimens), Teotihuacan-Estado de Mexico (one specimen) and Mitla-Oaxaca (one specimen); Mayan, Teotihuacan and Mixtec-Zapotec culture respectively. The samples were analyzed by Sem, EDS, Tem, XRD and IR. The results show calcite as common phase for all the samples, however exist other phases identified depending on the site as dolomite, ankerite, calcium silicon chloride, etc. The origin of the red color of the analyzed pigments were cinnabar (HgS) by a sample of Palenque and hematite (Fe 2 O 3 ) by the other specimen, this last crystalline phase also present in the Mitla and Teotihuacan samples. By IR were identified some organic compounds in all the samples, but not copal. (Author)

MATERIAL COMPOSITIONS AND NUMBER DENSITIES FOR NEUTRONICS CALCULATIONS

International Nuclear Information System (INIS)

D. A. Thomas

1996-01-01

The purpose of this analysis is to calculate the number densities and isotopic weight percentages of the standard materials to be used in the neutronics (criticality and radiation shielding) evaluations by the Waste Package Development Department. The objective of this analysis is to provide material number density information which can be referenced by future neutronics design analyses, such as for those supporting the Conceptual Design Report

U.S./Russian lab-to-lab materials protection, control and accounting program efforts at the Institute of Inorganic Materials. Revision 1

International Nuclear Information System (INIS)

Ruhter, W.D.; Kositsyn, V.; Rudenko, V.; Siskind, B.; Bieber, A.; Hoida, Hiroshi; Augustson, R.; Ehinger, M.; Smith, B.W.

1996-01-01

The All-Russian Scientific Research Institute of Inorganic Materials (VNIINM) performs research in nuclear power reactor fuel, spent fuel reprocessing and waste management, materials science of fissionable and reactor structural materials, metallurgy, superconducting materials, and analytical sciences. VNIINM supports the Ministry of Atomic Energy of the Russian Federation (MINATOM) in technologies for fabrication and processing of nuclear fuel. As a participant in the US/Russian Lab-to-Lab nuclear materials protection, control and accounting (MPC and A) program, VNIINM is providing support for measurements of nuclear materials in bulk forms by developing specifications, test and evaluation, certification, and implementation of measurement methods for such materials. In 1996, VNIINM will be working with Brookhaven staff in developing and documenting material control and accounting requirements for nuclear materials in bulk form, Livermore and Los Alamos staff in testing and evaluating gamma-ray spectrometry methods for bulk materials, Los Alamos staff in test and evaluation of neutron-coincidence counting techniques, Oak Ridge staff in accounting of bulk materials with process instrumentation, and Pacific Northwest staff on automating VNIINM's coulometric titration system. In addition, VNIINM will develop a computerized accounting system for nuclear material within VNIINM and their storage facility. The paper will describe the status of this work and anticipated progress in 1996

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA

Directory of Open Access Journals (Sweden)

Ala Hassan A. Qamheya

2015-01-01

Full Text Available Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC material in teeth construction to rehabilitate a complete denture wearer patient.

DOE A9024 Final Report Functional and Nanoscale Materials Systems: Frontier Programs of Science at the Frederick Seitz Materials Research Laboratory

Energy Technology Data Exchange (ETDEWEB)

Lewis, Jennifer A.

2009-03-24

The scientific programs of the FSMRL supported under the DOE A9024 Grant consisted of four interdisciplinary research clusters, as described. The clusters were led by Professors Tai Chiang (Physics), Jeffrey Moore (Chemistry), Paul Goldbart (Physics), and Steven Granick (Materials Science and Engineering). The completed work followed a dominant theme--Nanoscale Materials Systems--and emphasized studies of complex phenomena involving surfaces, interfaces, complex materials, dynamics, energetics, and structures and their transformations. A summary of our key accomplishments is provided for each cluster.

Help at 3:00 AM! Providing 24/7 Timely Support to Online Students via a Virtual Assistant

Science.gov (United States)

Vu, Phu; Fredrickson, Scott; Meyer, Richard

2016-01-01

With a dearth of research on human-robot interaction in education and relatively high non-completion rates of online students, this study was conducted to determine the feasibility of using a virtual assistant (VA) to respond to questions and concerns of students and provide 24/7 online course content support. During a 16 week-long academic…

Heat exchanger with layers of helical tubes provided with improved tube supports

International Nuclear Information System (INIS)

Carnoy, M.; Mathieu, B.; Renaux, C.

1986-01-01

The present heat exchanger comprises coaxial layers of helically wound tubes; these tubes are supported by support plates, each comprising a row of perforations through which the tubes of a same layer pass. Truncated sleeves are in compression around the tubes within the perforations and mounted on the support plates. Pins fix the plates of different layers together against transverse movement but allowing radial movement. The present invention finds an application with nuclear reactor steam generators [fr

International survey of research university leadership views on supporting open access scholarly & educational materials

CERN Document Server

2017-01-01

This report looks closely at the attitudes on open access of a sample of 314 deans, chancellors, department chairmen, research institute directors, provosts, trustees, vice presidents and other upper level administrators from more than 50 research universities in the USA, Canada, the UK, Ireland and Australia. The report gives detailed information on what they think of the cost of academic journal subscriptions, and how they understand the meaning of the term “open access.” The study also gives highly detailed data on what kind of policies the research university elite support or might support in the area of open access, including policies such as restricting purchases of very high-priced journals, paying publication fees for open access publications, mandating deposit of university scholarship into digital repositories, and developing open access educational materials from university resources. Just a few of the report’s many findings are that: • The lowest percentage of those interviewed considering...

The role of family and friends in providing social support towards enhancing the wellbeing of postpartum women: a comprehensive systematic review.

Science.gov (United States)

Ni, Phang Koh; Siew Lin, Serena Koh

2011-01-01

Maternal postpartum health is a neglected area both in research and practice. This aspect warrants more attention as the health of postpartum mothers has a considerable influence on her infant and also other family members. Social support provided by family and friends has been identified as a buffer against the many stressors faced by the women. Outcomes such as self-esteem, stress, postnatal depression, breastfeeding levels, infant care, and maternal adaptation have been studied and found to be significantly related to social support. The need to understand the role of social support provided by family and friends provide the impetus for conducting this review. The objective of this systematic review was to appraise and synthesise the best available evidence which discusses the impact of social support from family and friends on enhancing the wellbeing of postpartum women. This review includes women who were within their first year postpartum period, with any number of children, and had given birth to healthy infants. Mothers who had co-existing morbidities such as depression were excluded. Mothers from low socio-economic groups were excluded.This review considered any study that involved the provision of social support by family and/or friends. Interventions provided by peer counsellors were also considered.The six outcomes were stress, self esteem, breastfeeding levels, mental health in relation to postnatal depression, infant care and maternal adaptation.Quantitative This review considered any randomised controlled trials that examined the effectiveness of social support from family and friends on the well being of the postpartum women. As it was not likely to find RCTs on this topic, this review also considered observational studies (cohort, case control, quantitative descriptive studies such as surveys).Qualitative This review considered any interpretive studies that drew on the experiences of social support from family and friends in postpartum women

Scientific capabilities of the advanced light source for radioactive materials

International Nuclear Information System (INIS)

Shuh, D.K.

2007-01-01

The Advanced Light Source (ALS) of Lawrence Berkeley National Laboratory (LBNL) is a third-generation synchrotron radiation light source and is a U.S. Department of Energy (DOE) national user facility. Currently, the ALS has approximately forty-five operational beamlines spanning a spectrum of scientific disciplines, and provides scientific opportunities for more than 2 000 users a year. Access to the resources of the ALS is through a competitive proposal mechanism within the general user program. Several ALS beamlines are currently being employed for a range of radioactive materials investigations. These experiments are reviewed individually relying on a graded hazard approach implemented by the ALS in conjunction with the LBNL Environmental, Health, and Safety (EH and S) Radiation Protection Program. The ALS provides radiological work authorization and radiological control technician support and assistance for accepted user experimental programs. LBNL has several radioactive laboratory facilities located near the ALS that provide support for ALS users performing experiments with radioactive materials. The capabilities of the ALS beamlines for investigating radioactive materials are given and examples of several past studies are summarised. (author)

Materials research at CMAM

International Nuclear Information System (INIS)

Zucchiatti, Alessandro

2013-01-01

The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autónoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming

Materials research at CMAM

Science.gov (United States)

Zucchiatti, Alessandro

2013-07-01

The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autónoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming.

Sandia National Laboratories, California Hazardous Materials Management Program annual report : February 2009.

Energy Technology Data Exchange (ETDEWEB)

Brynildson, Mark E.

2009-02-01

The annual program report provides detailed information about all aspects of the Sandia National Laboratories, California (SNL/CA) Hazardous Materials Management Program. It functions as supporting documentation to the SNL/CA Environmental anagement ystem Program Manual. This program annual report describes the activities undertaken during the past year, and activities planned in future years to implement the Hazardous Materials Management Program, one of six programs that supports environmental management at SNL/CA.

Derivatized graphitic nanofibres (GNF) as a new support material for mass spectrometric analysis of peptides and proteins.

Science.gov (United States)

Greiderer, Andreas; Rainer, Matthias; Najam-ul-Haq, Muhammad; Vallant, Rainer M; Huck, Christian W; Bonn, Günther K

2009-07-01

Graphitic nanofibres (GNFs), 100-200 nm in diameter and 5-20 microm in length have been modified in order to yield different affinities (Cu2+ and Fe3+ loaded immobilized metal affinity chromatography (IMAC) as well as cation and anion exchange materials) for the extraction of a range of biomolecules by their inherited hydrophobicity and the hydrophilic chemical functionalities, obtained by derivatization. Modified GNFs have for the first time been employed as carrier materials for protein profiling in material-enhanced laser desorption/ionization (MELDI) for the enrichment and screening of biofluids. For that purpose, the derivatized GNF materials have comprehensively been characterized regarding surface area, structural changes during derivatization, IMAC, as well as ion exchange and protein-loading capacity and recovery. GNF derivatives revealed high protein-binding capacity (2,000 microg ml(-1) for insulin) and ideal sensitivities, resulting in a detection limit of 50 fmol microl(-1) (for insulin), which is crucial for the detection of low abundant species in biological samples. Compared to other MELDI carrier materials, sensitivity was enhanced on GNF derivatives, which might be ascribed to the fact that GNFs support desorption and ionization mechanisms and by absorbing laser energy in addition to matrix.

The benefit of meeting a stranger: Experiences with emotional support provided by nurses among Danish-born and migrant cancer patients

DEFF Research Database (Denmark)

Kristiansen, Maria Karen; Tjørnhøj-Thomsen, Tine; Krasnik, Allan

2010-01-01

PURPOSE: Research among cancer patients has shown that emotional support in informal relationships may be difficult to access because of a fear or lack of knowledge about cancer. Consequently, formal relationships with healthcare professionals may be important sources of support. AIM: This study...... explores needs for and experiences with emotional support provided by nurses as well as prerequisites for the provision of support among Danish-born and migrant cancer patients. METHOD: We conducted narrative interviews with 18 adult Danish-born and migrant cancer patients. Patients were recruited from...... a variety of places in a purposive strategic sampling process. Analysis was inspired by phenomenological methods and Simmel's theoretical concept of "the stranger". RESULTS: Both Danish-born and migrant patients perceived the support delivered by healthcare professionals as available, empathic and valuable...

Magnetic materials and 3D finite element modeling

CERN Document Server

Bastos, Joao Pedro A

2014-01-01

Magnetic Materials and 3D Finite Element Modeling explores material characterization and finite element modeling (FEM) applications. This book relates to electromagnetic analysis based on Maxwell’s equations and application of the finite element (FE) method to low frequency devices. A great source for senior undergraduate and graduate students in electromagnetics, it also supports industry professionals working in magnetics, electromagnetics, ferromagnetic materials science and electrical engineering. The authors present current concepts on ferromagnetic material characterizations and losses. They provide introductory material; highlight basic electromagnetics, present experimental and numerical modeling related to losses and focus on FEM applied to 3D applications. They also explain various formulations, and discuss numerical codes.

Develop Improved Materials to Support the Hydrogen Economy

Energy Technology Data Exchange (ETDEWEB)

Dr. Michael C. Martin

2012-07-18

The Edison Materials Technology Center (EMTEC) solicited and funded hydrogen infrastructure related projects that have a near term potential for commercialization. The subject technology of each project is related to the US Department of Energy hydrogen economy goals as outlined in the multi-year plan titled, 'Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan.' Preference was given to cross cutting materials development projects that might lead to the establishment of manufacturing capability and job creation. The Edison Materials Technology Center (EMTEC) used the US Department of Energy hydrogen economy goals to find and fund projects with near term commercialization potential. An RFP process aligned with this plan required performance based objectives with go/no-go technology based milestones. Protocols established for this program consisted of a RFP solicitation process, white papers and proposals with peer technology and commercialization review (including DoE), EMTEC project negotiation and definition and DoE cost share approval. Our RFP approach specified proposals/projects for hydrogen production, hydrogen storage or hydrogen infrastructure processing which may include sensor, separator, compression, maintenance, or delivery technologies. EMTEC was especially alert for projects in the appropriate subject area that have cross cutting materials technology with near term manufacturing and commercialization opportunities.

Nano-Scale Au Supported on Carbon Materials for the Low Temperature Water Gas Shift (WGS Reaction

Directory of Open Access Journals (Sweden)

Paula Sánchez

2011-12-01

Full Text Available Au-based catalysts supported on carbon materials with different structures such as graphite (G and fishbone type carbon nanofibers (CNF-F were prepared using two different methods (impregnation and gold-sol to be tested in the water gas shift (WGS reaction. Atomic absorption spectrometry, transmission electron microscopy (TEM, temperature-programmed oxidation (TPO, X-ray diffraction (XRD, Raman spectroscopy, elemental analyses (CNH, N2 adsorption-desorption analysis, temperature-programmed reduction (TPR and temperature-programmed decomposition were employed to characterize both the supports and catalysts. Both the crystalline nature of the carbon supports and the method of gold incorporation had a strong influence on the way in which Au particles were deposited on the carbon surface. The higher crystallinity and the smaller and well dispersed Au particle size were, the higher activity of the catalysts in the WGS reaction was noted. Finally, catalytic activity showed an important dependence on the reaction temperature and steam-to-CO molar ratio.

Self-Supporting Nanoclay as Internal Scaffold Material for Direct Printing of Soft Hydrogel Composite Structures in Air.

Science.gov (United States)

Jin, Yifei; Liu, Chengcheng; Chai, Wenxuan; Compaan, Ashley; Huang, Yong

2017-05-24

Three dimensional (3D) bioprinting technology enables the freeform fabrication of complex constructs from various hydrogels and is receiving increasing attention in tissue engineering. The objective of this study is to develop a novel self-supporting direct hydrogel printing approach to extrude complex 3D hydrogel composite structures in air without the help of a support bath. Laponite, a member of the smectite mineral family, is investigated to serve as an internal scaffold material for the direct printing of hydrogel composite structures in air. In the proposed printing approach, due to its yield-stress property, Laponite nanoclay can be easily extruded through a nozzle as a liquid and self-supported after extrusion as a solid. Its unique crystal structure with positive and negative charges enables it to be mixed with many chemically and physically cross-linked hydrogels, which makes it an ideal internal scaffold material for the fabrication of various hydrogel structures. By mixing Laponite nanoclay with various hydrogel precursors, the hydrogel composites retain their self-supporting capacity and can be printed into 3D structures directly in air and retain their shapes before cross-linking. Then, the whole structures are solidified in situ by applying suitable cross-linking stimuli. The addition of Laponite nanoclay can effectively improve the mechanical and biological properties of hydrogel composites. Specifically, the addition of Laponite nanoclay results in a significant increase in the Young's modulus of each hydrogel-Laponite composite: 1.9-fold increase for the poly(ethylene glycol) diacrylate (PEGDA)-Laponite composite, 7.4-fold increase for the alginate-Laponite composite, and 3.3-fold increase for the gelatin-Laponite composite.

DOC/WSNSO [Department of Commerce/Weather Service Nuclear Support Office] operational support to Federal Radiological Monitoring and Assessment Center

International Nuclear Information System (INIS)

Mueller, P.

1989-01-01

The National Weather Service (NWS) is an agency of the Department of Commerce. The NWS has hundreds of weather offices throughout the United States. The Weather Service Nuclear Support Office (WSNSO) is a highly specialized unit of NWS that provides direct support to the U.S. Department of Energy's (DOE's) underground nuclear testing program. The WSNSO has been associated with the DOE for >33 yr. As a result of the unique relationship with the DOE, all WSNSO emergency response meteorologists and meteorological technicians are allowed access to classified material. Meteorological phenomena play a significant role during a Federal Radiological Monitoring and Assessment Center (FRMAC) event, and WSNSO meteorologists provide direct support to ARAC. The marriage of state-of-the-art computer systems together with proven technology provides the on-scene WSNSO meteorologist with essentially a portable fully equipped, fully functional, advanced NWS weather station. The WSNSO's emergency response personnel and hardware are at the ready and can be mobilized within 2 h. WSNSO can provide on-scene weather forecasts and critical weather data collection whenever and wherever necessary

Supporting the Creation and Publication of Reviewed and Tested Teaching Modules through the InTeGrate Project

Science.gov (United States)

Bruckner, M. Z.; Birnbaum, S. J.; Bralower, T. J.; Egger, A. E.; Fox, S.; Gosselin, D. C.; Iverson, E. A. R.; Manduca, C. A.; Mcconnell, D. A.; Steer, D. N.; Taber, J. J.

2016-12-01

InTeGrate is dedicated to providing robust curricular materials that increase Earth literacy among undergraduate students. As of August 2016, 14 modules that use an interdisciplinary approach to teach about Earth-related sustainability issues across the curriculum have been published, and 19 courses and modules are undergoing final revisions. Materials are designed for undergraduate courses and have been tested in a variety of disciplines including geoscience, engineering, humanities, ethics, and Spanish language courses. The materials were developed, tested, revised, and reviewed using a two-year, highly scaffolded process that involves meeting a series of checkpoints, and is supported by a team of experts who provide guidance and formative feedback throughout the process. A series of webinars also supported teams in the development process. Author teams comprise 3-6 faculty members from at least three different institutions. Authors work collaboratively in a templated webspace designed specifically for creating materials, and representatives from the InTeGrate leadership, assessment, and web teams support each group of authors. This support team provides guidance and feedback on content, pedagogy, and web layout as authors develop materials. Authors attend two face-to-face meetings, one at the beginning of the process and another after materials are piloted in authors' classes. These meetings serve to initially orient authors to the development process, including the rubric that will guide their work, and in making revisions following the piloting phase of the project. Authors report that the meetings also provide professional development experience wherein they learn about pedagogy from each other and team leaders. The bulk of the materials development occurs remotely, with teams meeting regularly via teleconference as they follow the project timeline. All materials undergo review against the Materials Design and Refinement Rubric to ensure they meet project

Thermally stable nanoparticles on supports

Science.gov (United States)

Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

2012-11-13

An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

Yolk-shell gold nanoparticles as model materials for support-effect studies in heterogeneous catalysis: Au, @C and Au, @ZrO2 for CO oxidation as an example.

Science.gov (United States)

Galeano, Carolina; Güttel, Robert; Paul, Michael; Arnal, Pablo; Lu, An-Hui; Schüth, Ferdi

2011-07-18

The use of nanostructured yolk-shell materials offers a way to discriminate support and particle-size effects for mechanistic studies in heterogeneous catalysis. Herein, gold yolk-shell materials have been synthesized and used as model catalysts for the investigation of support effects in CO oxidation. Carbon has been selected as catalytically inert support to study the intrinsic activity of the gold nanoparticles, and for comparison, zirconia has been used as oxidic support. Au, @C materials have been synthesized through nanocasting using two different nonporous-core@mesoporous-shell exotemplates: Au@SiO(2)@ZrO(2) and Au@SiO(2)@m-SiO(2). The catalytic activity of Au, @C with a gold core of about 14 nm has been evaluated and compared with Au, @ZrO(2) of the same gold core size. The strong positive effect of metal oxide as support material on the activity of gold has been proved. Additionally, size effects were investigated using carbon as support to determine only the contribution of the nanoparticle size on the catalytic activity of gold. Therefore, Au, @C with a gold core of about 7 nm was studied showing a less pronounced positive effect on the activity than the metal oxide support effect. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Establishing a distributed national research infrastructure providing bioinformatics support to life science researchers in Australia.

Science.gov (United States)

Schneider, Maria Victoria; Griffin, Philippa C; Tyagi, Sonika; Flannery, Madison; Dayalan, Saravanan; Gladman, Simon; Watson-Haigh, Nathan; Bayer, Philipp E; Charleston, Michael; Cooke, Ira; Cook, Rob; Edwards, Richard J; Edwards, David; Gorse, Dominique; McConville, Malcolm; Powell, David; Wilkins, Marc R; Lonie, Andrew

2017-06-30

EMBL Australia Bioinformatics Resource (EMBL-ABR) is a developing national research infrastructure, providing bioinformatics resources and support to life science and biomedical researchers in Australia. EMBL-ABR comprises 10 geographically distributed national nodes with one coordinating hub, with current funding provided through Bioplatforms Australia and the University of Melbourne for its initial 2-year development phase. The EMBL-ABR mission is to: (1) increase Australia's capacity in bioinformatics and data sciences; (2) contribute to the development of training in bioinformatics skills; (3) showcase Australian data sets at an international level and (4) enable engagement in international programs. The activities of EMBL-ABR are focussed in six key areas, aligning with comparable international initiatives such as ELIXIR, CyVerse and NIH Commons. These key areas-Tools, Data, Standards, Platforms, Compute and Training-are described in this article. © The Author 2017. Published by Oxford University Press.

Emotional Literacy Support Assistants' Views on Supervision Provided by Educational Psychologists: What EPs Can Learn from Group Supervision

Science.gov (United States)

Osborne, Cara; Burton, Sheila

2014-01-01

The Educational Psychology Service in this study has responsibility for providing group supervision to Emotional Literacy Support Assistants (ELSAs) working in schools. To date, little research has examined this type of inter-professional supervision arrangement. The current study used a questionnaire to examine ELSAs' views on the supervision…

Municipal recycling support program. Guide to applicants

Energy Technology Data Exchange (ETDEWEB)

1989-01-01

The Municipal Recycling Support Program stems from the Ontario Ministry of the Environment's policies and programs begun in 1980 aimed at encouraging the development of source separation projects in Ontario. To qualify for financial assistance, municipalities must play a central role in the implementation and ongoing development of recycling; applications will be supported only if there is adequate and reasonable commitment from markets for recovered materials; recycling systems must operate within the framework of a complete waste management system in which cost effectiveness is an important factor; multi-material projects are encouraged as much as possible; and the Ministry will share the costs of projects with the municipalities. The Ministry provides grants for up to 5 years per project to cover the net operating cost of a project up to a specified maximum percentage of eligible gross operating expenses. This manual provides guidelines for applying for such funding, including definitions of eligibility for operating and capital costs, the use of household bins, and guidelines for promotion and advertising, education, demonstration, and feasibility studies.

Sequential mediating effects of provided and received social support on trait emotional intelligence and subjective happiness: A longitudinal examination in Hong Kong Chinese university students.

Science.gov (United States)

Ye, Jiawen; Yeung, Dannii Y; Liu, Elaine S C; Rochelle, Tina L

2018-04-03

Past research has often focused on the effects of emotional intelligence and received social support on subjective well-being yet paid limited attention to the effects of provided social support. This study adopted a longitudinal design to examine the sequential mediating effects of provided and received social support on the relationship between trait emotional intelligence and subjective happiness. A total of 214 Hong Kong Chinese undergraduates were asked to complete two assessments with a 6-month interval in between. The results of the sequential mediation analysis indicated that the trait emotional intelligence measured in Time 1 indirectly influenced the level of subjective happiness in Time 2 through a sequential pathway of social support provided for others in Time 1 and social support received from others in Time 2. These findings highlight the importance of trait emotional intelligence and the reciprocal exchanges of social support in the subjective well-being of university students. © 2018 International Union of Psychological Science.

Electrostatic Levitation for Studies of Additive Manufactured Materials

Science.gov (United States)

SanSoucie, Michael P.; Rogers, Jan R.; Tramel, Terri

2014-01-01

The electrostatic levitation (ESL) laboratory at NASA's Marshall Space Flight Center is a unique facility for investigators studying high temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified. Electrostatic levitation minimizes gravitational effects and allows materials to be studied without contact with a container or instrumentation. The lab also has a high temperature emissivity measurement system, which provides normal spectral and normal total emissivity measurements at use temperature. The ESL lab has been instrumental in many pioneering materials investigations of thermophysical properties, e.g., creep measurements, solidification, triggered nucleation, and emissivity at high temperatures. Research in the ESL lab has already led to the development of advanced high temperature materials for aerospace applications, coatings for rocket nozzles, improved medical and industrial optics, metallic glasses, ablatives for reentry vehicles, and materials with memory. Modeling of additive manufacturing materials processing is necessary for the study of their resulting materials properties. In addition, the modeling of the selective laser melting processes and its materials property predictions are also underway. Unfortunately, there is very little data for the properties of these materials, especially of the materials in the liquid state. Some method to measure thermophysical properties of additive manufacturing materials is necessary. The ESL lab is ideal for these studies. The lab can provide surface tension and viscosity of molten materials, density measurements, emissivity measurements, and even creep strength measurements. The ESL lab can also determine melting temperature, surface temperatures, and phase transition temperatures of additive manufactured materials. This presentation will provide background on the ESL lab and its capabilities, provide an approach to using the ESL

Social pedagogy as a model to provide support for siblings of children with intellectual disabilities: A report of the views of the children and young people using a sibling support group.

OpenAIRE

Carter, Sid; Cook, J.; Sutton-Boulton, G.; Ward, V.; Clarke, S.

2015-01-01

The experiences of non-disabled children growing up with a sibling with an intellectual disability vary considerably, with reported impact ranging from increased mental health problems through evaluations of life enhancement. However, there is evidence that the net impact is neutral to positive, which was supported by the findings of this report of a service evaluation survey. The value of providing support to those young siblings is however clear. An established method of support is within a...

A critical review of the use of technology to provide psychosocial support for children and young people with long-term conditions.

Science.gov (United States)

Aldiss, Susie; Baggott, Christina; Gibson, Faith; Mobbs, Sarah; Taylor, Rachel M

2015-01-01

Advances in technology have offered health professionals alternative mediums of providing support to patients with long-term conditions. This critical review evaluated and assessed the benefit of electronic media technologies in supporting children and young people with long-term conditions. Of 664 references identified, 40 met the inclusion criteria. Supportive technology tended to increase disease-related knowledge and improve aspects of psychosocial function. Supportive technology did not improve quality of life, reduce health service use or decrease school absences. The poor methodological quality of current evidence and lack of involvement of users in product development contribute to the uncertainty that supportive technology is beneficial. Copyright © 2015 Elsevier Inc. All rights reserved.

Composite Materials for Thermal Energy Storage: Enhancing Performance through Microstructures

Science.gov (United States)

Ge, Zhiwei; Ye, Feng; Ding, Yulong

2014-01-01

Chemical incompatibility and low thermal conductivity issues of molten-salt-based thermal energy storage materials can be addressed by using microstructured composites. Using a eutectic mixture of lithium and sodium carbonates as molten salt, magnesium oxide as supporting material, and graphite as thermal conductivity enhancer, the microstructural development, chemical compatibility, thermal stability, thermal conductivity, and thermal energy storage performance of composite materials are investigated. The ceramic supporting material is essential for preventing salt leakage and hence provides a solution to the chemical incompatibility issue. The use of graphite gives a significant enhancement on the thermal conductivity of the composite. Analyses suggest that the experimentally observed microstructural development of the composite is associated with the wettability of the salt on the ceramic substrate and that on the thermal conduction enhancer. PMID:24591286

Technology solutions to support supervisory activities and also to provide information access to the society

Science.gov (United States)

Paladini, D.; Mello, A. B.

2016-07-01

Inmetro's data about the conformity of certificated products, process and services are, usually, displayed at fragmented databases of difficult access for several reasons, for instance, the lack of computational solutions which allow this kind of access to its users. A discussion about some of the technological solutions to support supervisory activities by the appropriate regulatory bodies and also to provide information access to society in general is herein presented, along with a theoretical explanation of the pros and cons of such technologies to the conclusion that a mobile platform seems to be the best tool for the requirements of Inmetro.

Materials Science Programs

International Nuclear Information System (INIS)

1990-03-01

The Division of Materials Sciences is located within the Department of Energy in the Office of Basic Energy Sciences. The Office of Basic Energy Sciences reports to the Director of the Office of Energy Research. The Director of this office is appointed by the President with Senate consent. The Director advises the Secretary on the physical research program; monitors the Department's R ampersand D programs; advises the Secretary on management of the laboratories under the jurisdiction of the Department, excluding those that constitute part of the nuclear weapon complex; and advises the Secretary on basic and applied research activities of the Department. The research covers a spectrum of scientific and engineering areas of interest to the Department of Energy and is conducted generally by personnel trained in the disciplines of Solid State Physics, Metallurgy, Ceramics, Chemistry, Polymers and Materials Science. The Materials Sciences Division supports basic research on materials properties and phenomena important to all energy systems. The aim is to provide the necessary base of materials knowledge required to advance the nation's energy programs. This report contains a listing of research underway in FY 1989 together with a convenient index to the Division's programs

Accommodations and Support Services for Students with Autism Spectrum Disorder (ASD): A National Survey of Disability Resource Providers

Science.gov (United States)

Brown, Kirsten R.

2017-01-01

Students with Autism Spectrum Disorder (ASD) are participating in postsecondary education at an increasing rate. Yet, we know little about what types of accommodations or services disability resource providers employ to support students with ASD. The purpose of this study was to examine how postsecondary institutions are fostering the academic…

Preparation of technical support material for radioactively contaminated land

International Nuclear Information System (INIS)

2000-01-01

The UK Government is considering the introduction of a regulatory regime to address the legacy of sites that are radioactively contaminated due to historical activities. The Department of the Environment, Transport and the Regions (DETR) consulted on the principles of this regime in 1998, although no specific plans are yet in place to introduce the regime. The consultation paper envisaged that the Environment Agencies would have a major role in regulating the investigation and assessment of potentially contaminated sites and, where appropriate, their remediation. This work was commissioned by the Environment Agency, with support from DETR and SNIFFER (Scottish and Northern Ireland Forum for Environmental Research) to provide information on the techniques available allow the Environment Agencies to fulfil their envisaged regulatory requirements, and to assist DETR in the preparation of Statutory Guidance. The work was carried out by Entec UK Ltd, in conjunction with the NRPB

Materials and Components Technology Division research summary, 1991

International Nuclear Information System (INIS)

1991-04-01

This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base

Materials and Components Technology Division research summary, 1991

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base.

NASA Glenn Research Center Support of the Advanced Stirling Radioisotope Generator Project

Science.gov (United States)

Wilson, Scott D.; Wong, Wayne A.

2015-01-01

A high-efficiency radioisotope power system was being developed for long-duration NASA space science missions. The U.S. Department of Energy (DOE) managed a flight contract with Lockheed Martin Space Systems Company to build Advanced Stirling Radioisotope Generators (ASRGs), with support from NASA Glenn Research Center. DOE initiated termination of that contract in late 2013, primarily due to budget constraints. Sunpower, Inc., held two parallel contracts to produce Advanced Stirling Convertors (ASCs), one with Lockheed Martin to produce ASC-F flight units, and one with Glenn for the production of ASC-E3 engineering unit "pathfinders" that are built to the flight design. In support of those contracts, Glenn provided testing, materials expertise, Government-furnished equipment, inspection capabilities, and related data products to Lockheed Martin and Sunpower. The technical support included material evaluations, component tests, convertor characterization, and technology transfer. Material evaluations and component tests were performed on various ASC components in order to assess potential life-limiting mechanisms and provide data for reliability models. Convertor level tests were conducted to characterize performance under operating conditions that are representative of various mission conditions. Despite termination of the ASRG flight development contract, NASA continues to recognize the importance of high-efficiency ASC power conversion for Radioisotope Power Systems (RPS) and continues investment in the technology, including the continuation of the ASC-E3 contract. This paper describes key Government support for the ASRG project and future tests to be used to provide data for ongoing reliability assessments.

Supporting industries energy and environmental profile

Energy Technology Data Exchange (ETDEWEB)

None, None

2005-09-21

As part of its Industries of the Future strategy, the Industrial Technologies Program within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy works with energy-intensive industries to improve efficiency, reduce waste, and increase productivity. These seven Industries of the Future (IOFs) – aluminum, chemicals, forest products, glass, metal casting, mining, and steel – rely on several other so-called “supporting industries” to supply materials and processes necessary to the products that the IOFs create. The supporting industries, in many cases, also provide great opportunities for realizing energy efficiency gains in IOF processes.

Photoelastic analysis of mandibular full-arch implant-supported fixed dentures made with different bar materials and manufacturing techniques.

Science.gov (United States)

Zaparolli, Danilo; Peixoto, Raniel Fernandes; Pupim, Denise; Macedo, Ana Paula; Toniollo, Marcelo Bighetti; Mattos, Maria da Glória Chiarello de

2017-12-01

To compare the stress distribution of mandibular full dentures supported with implants according to the bar materials and manufacturing techniques using a qualitative photoelastic analysis. An acrylic master model simulating the mandibular arch was fabricated with four Morse taper implant analogs of 4.5×6mm. Four different bars were manufactured according to different material and techniques: fiber-reinforced resin (G1, Trinia, CAD/CAM), commercially pure titanium (G2, cpTi, CAD/CAM), cobalt‑chromium (G3, Co-Cr, CAD/CAM) and cobalt‑chromium (G4, Co-Cr, conventional cast). Standard clinical and laboratory procedures were used by an experienced dental technician to fabricate 4 mandibular implant-supported dentures. The photoelastic model was created based on the acrylic master model. A load simulation (150N) was performed in total occlusion against the antagonist. Dentures with fiber-reinforced resin bar (G1) exhibited better stress distribution. Dentures with machined Co-Cr bar (G3) exhibited the worst standard of stress distribution, with an overload on the distal part of the posteriors implants, followed by dentures with cast Co-Cr bar (G4) and machined cpTi bar (G2). The fiber-reinforced resin bar exhibited an adequate stress distribution and can serve as a viable alternative for oral rehabilitation with mandibular full dentures supported with implants. Moreover, the use of the G1 group offered advantages including reduced weight and less possible overload to the implants components, leading to the preservation of the support structure. Copyright © 2017 Elsevier B.V. All rights reserved.

Quantum Materials at the Nanoscale - Final Report

Energy Technology Data Exchange (ETDEWEB)

Cooper, Stephen Lance [Univ. of Illinois, Urbana, IL (United States). Dept. of Physics

2016-01-11

The central aim of the Quantum Materials at the Nanoscale (QMN) cluster was to understand and control collective behavior involving the interplay of spins, orbitals, and charges, which governs many scientifically interesting and technologically important phenomena in numerous complex materials. Because these phenomena involve various competing interactions, and influence properties on many different length and energy scales in complex materials, tackling this important area of study motivated a collaborative effort that combined the diverse capabilities of QMN cluster experimentalists, the essential theoretical analysis provided by QMN cluster theorists, and the outstanding facilities and staff of the FSMRL. During the funding period 2007-2014, the DOE cluster grant for the Quantum Materials at the Nanoscale (QMN) cluster supported, at various times, 15 different faculty members (14 in Physics and 1 in Materials Science and Engineering), 7 postdoctoral research associates, and 57 physics and materials science PhD students. 41 of these PhD students have since graduated and have gone on to a variety of advanced technical positions at universities, industries, and national labs: 25 obtained postdoctoral positions at universities (14), industrial labs (2 at IBM), DOE national facilities (3 at Argonne National Laboratory, 1 at Brookhaven National Lab, 1 at Lawrence Berkeley National Lab, and 1 at Sandia National Lab), and other federal facilities (2 at NIST); 13 took various industrial positions, including positions at Intel (5), Quantum Design (1), Lasque Industries (1), Amazon (1), Bloomberg (1), and J.P. Morgan (1). Thus, the QMN grant provided the essential support for training a large number of technically advanced personnel who have now entered key national facilities, industries, and institutions. Additionally, during the period 2007-2015, the QMN cluster produced 159 publications (see pages 14-23), including 23 papers published in Physical Review Letters; 16

Acoustics of multiscale sorptive porous materials

Science.gov (United States)

Venegas, R.; Boutin, C.; Umnova, O.

2017-08-01

This paper investigates sound propagation in multiscale rigid-frame porous materials that support mass transfer processes, such as sorption and different types of diffusion, in addition to the usual visco-thermo-inertial interactions. The two-scale asymptotic method of homogenization for periodic media is successively used to derive the macroscopic equations describing sound propagation through the material. This allowed us to conclude that the macroscopic mass balance is significantly modified by sorption, inter-scale (micro- to/from nanopore scales) mass diffusion, and inter-scale (pore to/from micro- and nanopore scales) pressure diffusion. This modification is accounted for by the dynamic compressibility of the effective saturating fluid that presents atypical properties that lead to slower speed of sound and higher sound attenuation, particularly at low frequencies. In contrast, it is shown that the physical processes occurring at the micro-nano-scale do not affect the macroscopic fluid flow through the material. The developed theory is exemplified by introducing an analytical model for multiscale sorptive granular materials, which is experimentally validated by comparing its predictions with acoustic measurements on granular activated carbons. Furthermore, we provide empirical evidence supporting an alternative method for measuring sorption and mass diffusion properties of multiscale sorptive materials using sound waves.

Fire protection program fiscal year 1995 site support program plan, Hanford Fire Department

International Nuclear Information System (INIS)

Good, D.E.

1994-09-01

The mission of the Hanford Fire Department (HFD) is to support the safe and timely cleanup of the Hanford site by providing fire suppression, fire prevention, emergency rescue, emergency medical service, and hazardous materials response; and to be capable of dealing with and terminating emergency situations which could threaten the operations, employees, or interest of the US Department of Energy operated Hanford Site. This includes response to surrounding fire departments/districts under a mutual aid agreement and contractual fire fighting, hazardous materials, and ambulance support to Washington Public Power Supply System (Supply System). The fire department also provides site fire marshal overview authority, fire system testing and maintenance, self-contained breathing apparatus maintenance, building tours and inspections, ignitable and reactive waste site inspections, prefire planning, and employee fire prevention education. This report describes the specific responsibilities and programs that the HFD must support and the estimated cost of this support for FY1995

Reflections on prospective raw materials and materials with regard to the Czech Republic

International Nuclear Information System (INIS)

Schejbal, C.; Palas, M.

1997-01-01

Reflections on prospective mineral raw materials and materials must rest upon the expected demographic evolution, the evaluation of economic development and the development of manufacturing technologies and materials corresponding to them, trends in the consumption of mineral raw materials and possibilities of securing them. The evaluation of the given factors under conditions of the Czech Republic shows that one of the decisive prerequisites to transforming the Czech economy is to assure the fuel and energy security of the state. In addition to emphasis put on traditional and newly developed technologies of utilization of domestic resources of coal and the development of nuclear power, a diversification of supplies of oil and gas is necessary. Moreover, it is necessary to ensure domestic resources of raw materials to some prospective material areas, or to provide these raw materials by means of imports and/or entrepreneurial activity abroad. As far as raw materials for building and industrial rocks are concerned, it is necessary to support the exploitation and home utilization through laws and suitable economic tools at respecting environmental limitations. With non-traditional prospective raw materials, it will be desirable to promote exploration and mining especially in those cases when a precondition exists for the securing of sufficient reserves or when reserves are already known

CESAME: Providing High Quality Professional Development in Science and Mathematics for K-12 Teachers

Science.gov (United States)

Hickman, Paul

2002-04-01

It is appropriate that after almost half a century of Science and Mathematics education reform we take a look back and a peek forward to understand the present state of this wonderfully complex system. Each of the components of this system including teaching, professional development, assessment, content and the district K-12 curriculum all need to work together if we hope to provide quality science, mathematics and technology education for ALL students. How do the state and national standards drive the system? How do state policies on student testing and teacher licensure come into play? How do we improve the preparation, retention and job satisfaction of our K-12 teachers? What initiatives have made or are making a difference? What else needs to be done? What can the physics community do to support local efforts? This job is too big for any single organization or individual but we each can contribute to the effort. Our Center at Northeastern University, with support from the National Science Foundation, has a sharply defined focus: to get high quality, research-based instructional materials into the hands of K-12 classroom teachers and provide the support they need to use the materials effectively in their classrooms.

One-pot synthesis of nitrogen and sulfur co-doped graphene supported MoS2 as high performance anode materials for lithium-ion batteries

International Nuclear Information System (INIS)

Liu, Qiuhong; Wu, Zhenjun; Ma, Zhaoling; Dou, Shuo; Wu, Jianghong; Tao, Li; Wang, Xin; Ouyang, Canbing; Shen, Anli; Wang, Shuangyin

2015-01-01

Highlights: • Nitrogen and sulfur co-doped graphene supported MoS 2 nanosheets were successfully prepared and used as anode materials for Li-ion batteries. • The as-prepared anode materials show excellent stability in Li-ion batteries. • The materials show high reversible capacity for lithium ion batteries. - Abstract: Nitrogen and sulfur co-doped graphene supported MoS 2 (MoS 2 /NS-G) nanosheets were prepared through a one-pot thermal annealing method. The as prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectra and electrochemical techniques. The MoS 2 /NS-G shows high reversible capacity about 1200 mAh/g at current density of 150 mA/g and excellent stability in Li-ion batteries. It was demonstrated the co-doping of graphene by N and S could significantly enhance the durability of MoS 2 as anode materials for Li-ion batteries

NDA systems to support nuclear material control and accounting in spent fuel reprocessing plants

International Nuclear Information System (INIS)

Simpson, J.C.B.; Clark, P.A.; Nicols, O.P.; Whitehouse, K.R.

1999-01-01

Detailed descriptions of a number of instrument systems relating to accountancy and safeguarding of plutonium operations and storage on Thermal Oxide Plant (Thorp) are provided. The systems described include the Plutonium Inventory Measurement System (PIMS), used to provide Near Real Time Materials Accountancy (NRTMA) information within the Thorp plutonium finishing area; the Product Can Contents Monitor (PCCM), used to verify can weight measurements and isotopic composition and; the In-Store Plutonium Verification Monitor, used to provide in-situ measurements of plutonium in cans whilst they are in their storage channels. These nondestructive systems are necessarily combined with other physical security, surveillance and identification arrangements for the handling and storage of plutonium product cans [ru

Prehospital Providers' Perceptions on Providing Patient and Family Centered Care.

Science.gov (United States)

Ayub, Emily M; Sampayo, Esther M; Shah, Manish I; Doughty, Cara B

2017-01-01

A gap exists in understanding a provider's approach to delivering care that is mutually beneficial to patients, families, and other providers in the prehospital setting. The purpose of this study was to identify attitudes, beliefs, and perceived barriers to providing patient and family centered care (PFCC) in the prehospital setting and to describe potential solutions for improving PFCC during critical pediatric events. We conducted a qualitative, cross-sectional study of a purposive sample of Emergency Medical Technicians (EMTs) and paramedics from an urban, municipal, fire-based EMS system, who participated in the Pediatric Simulation Training for Emergency Prehospital Providers (PediSTEPPS) course. Two coders reviewed transcriptions of audio recordings from participants' first simulation scenario debriefings and performed constant comparison analysis to identify unifying themes. Themes were verified through member checking with two focus groups of prehospital providers. A total of 122 EMTs and paramedics participated in 16 audiotaped debriefing sessions and two focus groups. Four overarching themes emerged regarding the experience of PFCC by prehospital providers: (1) Perceived barriers included the prehospital environment, limited manpower, multi-tasking medical care, and concern for interference with patient care; (2) Providing emotional support comprised of empathetically comforting caregivers, maintaining a calm demeanor, and empowering families to feel involved; (3) Effective communication strategies consisted of designating a family point person, narration of actions, preempting the next steps, speaking in lay terms, summarizing during downtime, and conveying a positive first impression; (4) Tactics to overcome PFCC barriers were maintaining a line of sight, removing and returning a caregiver to and from the scene, and providing situational awareness. Based on debriefings from simulated scenarios, some prehospital providers identified the provision of

Implant supported overdentures--the Copenhagen experience

DEFF Research Database (Denmark)

Gotfredsen, K

1997-01-01

OBJECTIVES: To evaluate the functional and biological effect of implant-supported overdenture treatment in the lower jaw. METHODS AND MATERIALS: Thirty-two patients were consecutively treated with Astra Tech implants in the lower jaw for retaining overdentures. All implants had a diameter of 3.5 mm...... and all but two of the implants were longer than 10 mm. For the implant supported overdentures two methods of attachment were used, a bar or a ball. RESULTS: One of 69 fixtures was lost during the 4-5 year observation period. The mean bone loss for all fixtures was less than 0.2 mm per year. Complications...... quality and quantity is sufficient, two implants can support an overdenture in the lower jaw, providing prosthesis which functions well....

Mechanical properties of materials with nanometer scale dimensions and microstructures

Energy Technology Data Exchange (ETDEWEB)

Nix, William D. [Stanford Univ., CA (United States)

2015-08-05

The three-year grant for which this final report is required extends from 2011 to 2015, including a one-year, no-cost extension. But this is just the latest in a long series of grants from the Division of Materials Sciences of DOE and its predecessor offices and agencies. These include contracts or grants from: the Metallurgy Branch of the U.S. Atomic Energy Commission (from the late 1960s to the mid-1970s), the Materials Science Program of the U.S. Energy Research and Development Administration (from the mid- to late- 1970s), and the Division of Materials Science of the Office of Basic Energy Sciences of the U.S. Department of Energy (from the early 1980s to the present time). Taken all together, these offices have provided nearly continuous support for our research for nearly 50 years. As we have said on many occasions, this research support has been the best we have ever had, by far. As we look back on the nearly five decades of support from the Division of Materials Sciences and the predecessor offices, we find that the continuity of support that we have enjoyed has allowed us to be most productive and terms of papers published, doctoral students graduated and influence on the field of materials science. This report will, of course, cover the three-year period of the present grant, in summary form, but will also make reference to the output that resulted from support of previous grants from the Division of Materials Sciences and its predecessor offices.

Activated carbon-supported CuO nanoparticles: a hybrid material for carbon dioxide adsorption

Science.gov (United States)

Boruban, Cansu; Esenturk, Emren Nalbant

2018-03-01

Activated carbon-supported copper(II) oxide (CuO) nanoparticles were synthesized by simple impregnation method to improve carbon dioxide (CO2) adsorption capacity of the support. The structural and chemical properties of the hybrid material were characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (https://www.google.com.tr/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0CCsQFjAC&url=http%3A%2F%2Fwww.intertek.com%2Fanalytical-laboratories%2Fxrd%2F&ei=-5WZVYSCHISz7Aatqq-IAw&usg=AFQjCNFBlk-9wqy49foh8tskmbD-GGbG9g&sig2=eKrhYjO75rl_Id2sLGpq4w&bvm=bv.96952980,d.bGg) (XRD), X-ray photoelectron spectroscopy (XPS), atomic absorption spectroscopy (AAS), and Brunauer-Emmett-Teller (BET) analyses. The analyses showed that CuO nanoparticles are well-distributed on the activated carbon surface. The CO2 adsorption behavior of the activated carbon-supported CuO nanoparticles was observed by thermogravimetric analysis (TGA), temperature programmed desorption (TPD), Fourier transform infrared (FTIR), and BET analyses. The results showed that CuO nanoparticle loading on activated carbon led to about 70% increase in CO2 adsorption capacity of activated carbon under standard conditions (1 atm and 298 K). The main contributor to the observed increase is an improvement in chemical adsorption of CO2 due to the presence of CuO nanoparticles on activated carbon.

Teaching strategies to support isiXhosa learners who receive ...

African Journals Online (AJOL)

There are a number of challenges related to teaching in a multi-linguistic classroom. Despite the literature clearly indicating how learners acquire learning, there is still a dearth of material on descriptions of current support provided to learners within the theoretical framework of Bronfenbrenner's ecological systems theory.

Composite materials for thermal energy storage: enhancing performance through microstructures.

Science.gov (United States)

Ge, Zhiwei; Ye, Feng; Ding, Yulong

2014-05-01

Chemical incompatibility and low thermal conductivity issues of molten-salt-based thermal energy storage materials can be addressed by using microstructured composites. Using a eutectic mixture of lithium and sodium carbonates as molten salt, magnesium oxide as supporting material, and graphite as thermal conductivity enhancer, the microstructural development, chemical compatibility, thermal stability, thermal conductivity, and thermal energy storage performance of composite materials are investigated. The ceramic supporting material is essential for preventing salt leakage and hence provides a solution to the chemical incompatibility issue. The use of graphite gives a significant enhancement on the thermal conductivity of the composite. Analyses suggest that the experimentally observed microstructural development of the composite is associated with the wettability of the salt on the ceramic substrate and that on the thermal conduction enhancer. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

QUALITATIVE FACTORS OF MATERIALITY - A REVIEW OF EMPIRICAL RESEARCH

OpenAIRE

Emil Irimie Popa; Ancuta Georgeta Span; Timea Melinda Fulop

2010-01-01

Determination of materiality is a crucial step in an audit mission because it affects theentire audit process. The incorrect application of materiality can have serious negativerepercussions on both the audited entity and the auditor (Enron-Anderson). Researches conductedover time revealed the complexity of this element in an audit mission and the need to emergencesome generally accepted rules and regulations to provide support in defining and substantiating theprofessional judgment applied i...

Advanced Industrial Materials (AIM) Program. Annual progress report, FY 1994

Energy Technology Data Exchange (ETDEWEB)

Sorrell, C.A.

1995-05-01

The Advanced Industrial Materials Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy in the Department of Energy. The mission of the AIM Program is to conduct applied research, development, and applications engineering work, in partnership with industry, to commercialize new or improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. AIM is responsible for identifying, supporting, and coordinating multidisciplinary projects to solve identified industrial needs and transferring the technology to the industrial sector. Program investigators in the DOE National Laboratories are working closely with approximately 100 companies, including 15 partners in Cooperative Research and Development Agreements. Work is being done in a wide variety of materials technologies, including intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The Program supports other efforts in the Office of Industrial Technologies to assist the energy consuming process industries, including forest products, glass, steel, aluminum, foundries, chemicals, and refineries. To support OITs {open_quotes}Industries of the Future{close_quotes} initiatives and to improve the relevance of materials research, assessments of materials needs and opportunities in the process industries are being made. These assessments are being used for program planning and priority setting; support of work to satisfy those needs is being provided. Many new materials that have come into the marketplace in recent years, or that will be available for commercial use within a few more years, offer substantial benefits to society. This document contains 28 reports on advanced materials research. Individual reports have been processed separately for entry onto the Department of Energy databases.

The Impact of Learning Style on Healthcare Providers' Preference for Voice Advisory Manikins versus Live Instructors in Basic Life Support Training

Science.gov (United States)

DiGiovanni, Lisa Marie

2013-01-01

The American Heart Association's HeartCode[TM] Healthcare Provider (HCP) Basic Life Support (BLS) e-learning program with voice-advisory manikins was implemented in an acute care hospital as the only teaching method offered for BLS certification. On course evaluations, healthcare provider staff commented that the VAM technology for skills practice…

Formative evaluation of the STAR intervention: improving teachers' ability to provide psychosocial support for vulnerable individuals in the school community.

Science.gov (United States)

Ferreira, Ronél; Ebersöhn, Liesel

2011-04-01

The article describes the pilot phase of a participatory reflection and action (PRA) study. The longitudinal investigation explores teachers' ability to provide psychosocial support within the context of HIV/AIDS following an asset-based intervention. The study ensued from our desire to understand and contribute to knowledge about the changed roles of teachers due to adversity in the community, specifically in relation to HIV/AIDS and education. The supportive teachers, assets and resilience (STAR) intervention was facilitated from November 2003 to October 2005 and consisted of the research team undertaking nine field visits and facilitating 20 intervention sessions (2-3 hours each), and 12 post-intervention research visits have been conducted to date. Ten female teachers were selected for participation through random purposeful sampling at a primary school in an informal settlement outside Port Elizabeth, South Africa. Data-generation included PRA activities, observation, informal interactive interviews, and focus group discussions. The data were analysed by means of inductive thematic analysis. We found that the teachers did not view vulnerability as being related to children or HIV/AIDS in isolation, but rather that their psychosocial support to children and the school community was inclusive across a spectrum of vulnerabilities and services. We argue that teachers who are inclined to provide such support will fulfil this role irrespective of understanding policy or receiving training. We contend that teachers are well-positioned to manage school-based psychosocial support in order to create relevant and caring spaces for vulnerable individuals in the school community.

Materials issues in cask development

International Nuclear Information System (INIS)

Chapman, R.L.; Sorenson, K.B.

1987-01-01

The Department of Energy Office of Civilian Radioactive Waste Management (DOE-OCRWM) is chartered by Congress under the Nuclear Waste Policy Act (NWPA) to build a permanent repository for commercial spent nuclear fuel and to provide a supporting transportation system. The OCRWM-sponsored From-Reactor Cask Systems Acquisition Program is developing a family of casks suitable for transporting commercial spent fuel. Phase I of the program is in the process of procuring cask designs for further development and eventual licensing. New materials will probably be proposed for various components of the cask system. This paper identifies potential new materials as a function of their use in the cask (containment, shielding, etc). To the extent that the identified materials are new (not yet qualified for their intended application), this paper identifies probable technical issues and development efforts which may be required to qualify the materials for uses in transportation casks

Materials management information systems.

Science.gov (United States)

1996-01-01

The hospital materials management function--ensuring that goods and services get from a source to an end user--encompasses many areas of the hospital and can significantly affect hospital costs. Performing this function in a manner that will keep costs down and ensure adequate cash flow requires effective management of a large amount of information from a variety of sources. To effectively coordinate such information, most hospitals have implemented some form of materials management information system (MMIS). These systems can be used to automate or facilitate functions such as purchasing, accounting, inventory management, and patient supply charges. In this study, we evaluated seven MMISs from seven vendors, focusing on the functional capabilities of each system and the quality of the service and support provided by the vendor. This Evaluation is intended to (1) assist hospitals purchasing an MMIS by educating materials managers about the capabilities, benefits, and limitations of MMISs and (2) educate clinical engineers and information system managers about the scope of materials management within a healthcare facility. Because software products cannot be evaluated in the same manner as most devices typically included in Health Devices Evaluations, our standard Evaluation protocol was not applicable for this technology. Instead, we based our ratings on our observations (e.g., during site visits), interviews we conducted with current users of each system, and information provided by the vendor (e.g., in response to a request for information [RFI]). We divided the Evaluation into the following sections: Section 1. Responsibilities and Information Requirements of Materials Management: Provides an overview of typical materials management functions and describes the capabilities, benefits, and limitations of MMISs. Also includes the supplementary article, "Inventory Cost and Reimbursement Issues" and the glossary, "Materials Management Terminology." Section 2. The

HANARO user support

Energy Technology Data Exchange (ETDEWEB)

Lee, Jeong Soo; Kim, Y. J.; Seong B.S. [and others

2003-06-01

The purpose of this project is to support external user for the promotion of HANARO common utilization effectively. To do this, external manpower was recruited and trained. Also, in order to find out and cultivate HANARO user, practice-oriented education was done. The total number of project selected as the promotion of HANARO common utilization was 31 in this year. These composed of four fields such as neutron beam utilization, materials/nuclear materials irradiation test, neutron activation analysis and radioisotope production. In each field, the numbers of project were 17, 7, 4 and 3 respectively. At first, from a selected project of view, supporting ratio by external manpower was reached to the 58%, that is, 18 out of 31 project was supported. In each field, it was 82% for neutron beam utilization and 100% for neutron activation analysis. Also, from the utilization time point of view, supporting ratio of external manpower was reached to 30% for neutron beam utilization and 59% for neutron activation analysis. Otherwise, supporting ratio by manpower in KAERI was reached to 97%, that is, 30 out of 31 project was supported. Also, from the utilization time point of view, total supporting ratio was reached to 15%. In each field, it was 20% for neutron beam utilization, 18% for materials/nuclear materials irradiation test, 20% for neutron activation analysis and 6% for radioisotope production. In order to contribute finding and cultivating of HANARO potential user and increase utilization ratio of HANARO experimental facility, practice-oriented HANARO user education has been done. At first, 32 participants from industries, universities, institutes were educated and practiced on HRPD/SANS instrument in the field of neutron beam utilization. Otherwise, in order to support external user effectively, external manpower were trained. Also, more effective support for external user could be possible through the grasping difficulty and problem on the performance of project

HANARO user support

International Nuclear Information System (INIS)

Lee, Jeong Soo; Kim, Y. J.; Seong B.S.

2003-06-01

The purpose of this project is to support external user for the promotion of HANARO common utilization effectively. To do this, external manpower was recruited and trained. Also, in order to find out and cultivate HANARO user, practice-oriented education was done. The total number of project selected as the promotion of HANARO common utilization was 31 in this year. These composed of four fields such as neutron beam utilization, materials/nuclear materials irradiation test, neutron activation analysis and radioisotope production. In each field, the numbers of project were 17, 7, 4 and 3 respectively. At first, from a selected project of view, supporting ratio by external manpower was reached to the 58%, that is, 18 out of 31 project was supported. In each field, it was 82% for neutron beam utilization and 100% for neutron activation analysis. Also, from the utilization time point of view, supporting ratio of external manpower was reached to 30% for neutron beam utilization and 59% for neutron activation analysis. Otherwise, supporting ratio by manpower in KAERI was reached to 97%, that is, 30 out of 31 project was supported. Also, from the utilization time point of view, total supporting ratio was reached to 15%. In each field, it was 20% for neutron beam utilization, 18% for materials/nuclear materials irradiation test, 20% for neutron activation analysis and 6% for radioisotope production. In order to contribute finding and cultivating of HANARO potential user and increase utilization ratio of HANARO experimental facility, practice-oriented HANARO user education has been done. At first, 32 participants from industries, universities, institutes were educated and practiced on HRPD/SANS instrument in the field of neutron beam utilization. Otherwise, in order to support external user effectively, external manpower were trained. Also, more effective support for external user could be possible through the grasping difficulty and problem on the performance of project

Biomechanical testing of materials in avian nests provides insight into nest construction behaviour

OpenAIRE

Biddle, Lucia E.; Deeming, D. Charles; Goodman, Adrian M.

2015-01-01

Animals that use materials to build nest structures have long since fascinated biologists and engineers alike. Avian nests are generally composed of collected materials brought together into a cup-like structure in which the bird sits to incubate eggs and, in many cases, it is where chicks are reared. Hence, the materials in a nest can be presumed to be loaded in compression, but relatively few studies have investigated the mechanical role of the nest elements and their position w...

Redox-active Hybrid Materials for Pseudocapacitive Energy Storage

Science.gov (United States)

Boota, Muhammad

Organic-inorganic hybrid materials show a great promise for the purpose of manufacturing high performance electrode materials for electrochemical energy storage systems and beyond. Molecular level combination of two best suited components in a hybrid material leads to new or sometimes exceptional sets of physical, chemical, mechanical and electrochemical properties that makes them attractive for broad ranges of applications. Recently, there has been growing interest in producing redox-active hybrid nanomaterials for energy storage applications where generally the organic component provides high redox capacitance and the inorganic component offers high conductivity and robust support. While organic-inorganic hybrid materials offer tremendous opportunities for electrochemical energy storage applications, the task of matching the right organic material out of hundreds of natural and nearly unlimited synthetic organic molecules to appropriate nanostructured inorganic support hampers their electrochemical energy storage applications. We aim to present the recent development of redox-active hybrid materials for pseudocapacitive energy storage. We will show the impact of combination of suitable organic materials with distinct carbon nanostructures and/or highly conductive metal carbides (MXenes) on conductivity, charge storage performance, and cyclability. Combined experimental and molecular simulation results will be discussed to shed light on the interfacial organic-inorganic interactions, pseudocapacitive charge storage mechanisms, and likely orientations of organic molecules on conductive supports. Later, the concept of all-pseudocapacitive organic-inorganic asymmetric supercapacitors will be highlighted which open up new avenues for developing inexpensive, sustainable, and high energy density aqueous supercapacitors. Lastly, future challenges and opportunities to further tailor the redox-active hybrids will be highlighted.

The effectiveness of ERC advanced life support (ALS) provider courses for the retention of ALS knowledge.

Science.gov (United States)

Fischer, Henrik; Strunk, Guido; Neuhold, Stephanie; Kiblböck, Daniel; Trimmel, Helmut; Baubin, Michael; Domanovits, Hans; Maurer, Claudia; Greif, Robert

2012-02-01

Out-of-hospital emergency physicians in Austria need mandatory emergency physician training, followed by biennial refresher courses. Currently, both standardized ERC advanced life support (ALS) provider courses and conventional refresher courses are offered. This study aimed to compare the retention of ALS-knowledge of out-of-hospital emergency physicians depending on whether they had or had not participated in an ERC-ALS provider course since 2005. Participants (n=807) from 19 refresher courses for out-of-hospital emergency physicians answered eight multiple-choice questions (MCQ) about ALS based on the 2005 ERC guidelines. The pass score was 75% correct answers. A multivariate logistic regression analyzed differences in passing scores between those who had previously participated in an ERC-ALS provider course and those who had not. Age, gender, regularity of working as an out-of-hospital emergency physician and the self-reported number of real resuscitation efforts within the last 6months were entered as control variables. Out-of-hospital emergency physicians who had previously attended an ERC-ALS provider course had a significantly higher chance of passing the MCQ test (OR=1.60, p=0.015). Younger age (OR=0.95, pERC-ALS provider course since 2005 had a higher retention of ALS knowledge compared to non-ERC-ALS course participants. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Cube-like α-Fe2O3 supported on ordered multimodal porous carbon as high performance electrode material for supercapacitors.

Science.gov (United States)

Chaudhari, Nitin K; Chaudhari, Sudeshna; Yu, Jong-Sung

2014-11-01

Well-dispersed cube-like iron oxide (α-Fe2O3) nanoparticles (NPs) supported on ordered multimodal porous carbon (OMPC) are synthesized for the first time by a facile and efficient glycine-assisted hydrothermal route. The effect of OPMC support on growth and formation mechanism of the Fe2O3 NPs is discussed. OMPC as a supporting material plays a pivotal role of controlling the shape, size, and dispersion of the Fe2O3 NPs. As-synthesized α-Fe2O3/OMPC composites reveal significant improvement in the performance as electrode material for supercapacitors. Compared to the bare Fe2O3 and OMPC, the composite exhibits excellent cycling stability, rate capability, and enhanced specific capacitances of 294 F g(-1) at 1.5 A g(-1), which is twice that of OMPC (145 F g(-1)) and about four times higher than that of bare Fe2O3 (85 F g(-1)). The improved electrochemical performance of the composite can be attributed to the well-defined structure, high conductivity, and hierarchical porosity of OMPC as well as the unique α-Fe2O3 NPs with cube-like morphology well-anchored on the OMPC support, which makes the composite a promising candidate for supercapacitors. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Investigating the Use and Effectiveness of Diverse Types of Materials in the Delivery and Support of Lab Sessions for Multimedia Subjects and Students

Science.gov (United States)

Tsekleves, Emmanuel; Aggoun, Amar; Cosmas, John

2013-01-01

This research study explores the use of different lab material, investigating which types of materials contribute the most to the delivery and support of laboratory (lab) sessions to design, skill-based and technical courses in higher education in the UK. A qualitative research methodology was employed for this investigation and included both key…

Life Support with Failures and Variable Supply

Science.gov (United States)

Jones, Harry

2010-01-01

The life support system for long duration missions will recycle oxygen and water to reduce the material resupply mass from Earth. The impact of life support failures was investigated by dynamic simulation of a lunar outpost habitat life support model. The model was modified to simulate resupply delays, power failures, recycling system failures, and storage failures. Many failures impact the lunar outpost water supply directly or indirectly, depending on the water balance and water storage. Failure effects on the water supply are reduced if Extra Vehicular Activity (EVA) water use is low and the water supply is ample. Additional oxygen can be supplied by scavenging unused propellant or by production from regolith, but the amounts obtained can vary significantly. The requirements for oxygen and water can also vary significantly, especially for EVA. Providing storage buffers can improve efficiency and reliability, and minimize the chance of supply failing to meet demand. Life support failures and supply variations can be survivable if effective solutions are provided by the system design

On-line radiation teaching materials using IT technology

International Nuclear Information System (INIS)

Inoue, Hiroyoshi

2005-01-01

We developed the on-line radiation teaching materials using the Internet, in order to provide the teaching support materials of atomic power and radiation educations in on-school study, as well as to create the complementary study system in off-school study. The themes of teaching materials were selected from requests by teachers. In the case of an elementary school, the teaching material 'an environmental problem and atomic power' was created as the aggregate of each content for study without boundary between subjects. The teaching material 'medical treatment and radiation' was created for junior high school students to raise the individual knowledge. In the case of a high school, the teaching material nucleus and radiation' was prepared to supplement the physical study of students. The on-line teaching materials were tried to 300 junior high school and high school students, 68% of students answered that the teaching material is effective to understand atomic power and radiation, though 17% answered they were not effective. Although there are problems to prepare IT learning equipments and learning follow-up system in the material, it is suggested that the on-line teaching materials will provide the novel learning system including debates for the study. This method has no limitation of time and place. (author)

N-Doped Carbon Xerogels as Pt Support for the Electro-Reduction of Oxygen

Directory of Open Access Journals (Sweden)

Cinthia Alegre

2017-09-01

Full Text Available Durability and limited catalytic activity are key impediments to the commercialization of polymer electrolyte fuel cells. Carbon materials employed as catalyst support can be doped with different heteroatoms, like nitrogen, to improve both catalytic activity and durability. Carbon xerogels are nanoporous carbons that can be easily synthesized in order to obtain N-doped materials. In the present work, we introduced melamine as a carbon xerogel precursor together with resorcinol for an effective in-situ N doping (3–4 wt % N. Pt nanoparticles were supported on nitrogen-doped carbon xerogels and their activity for the oxygen reduction reaction (ORR was evaluated in acid media along with their stability. Results provide new evidences of the type of N groups aiding the activity of Pt for the ORR and of a remarkable stability for N-doped carbon-supported Pt catalysts, providing appropriate physico-chemical features.

Qualitative study to explore the health and well-being impacts on adults providing informal support to female domestic violence survivors.

Science.gov (United States)

Gregory, Alison; Feder, Gene; Taket, Ann; Williamson, Emma

2017-03-24

Domestic violence (DV) is hazardous to survivors' health, from injuries sustained and from resultant chronic physical and mental health problems. Support from friends and relatives is significant in the lives of DV survivors; research shows associations between positive support and the health, well-being and safety of survivors. Little is known about how people close to survivors are impacted. The aim of this study was exploratory, with the following research question: what are the health and well-being impacts on adults who provide informal support to female DV survivors? A qualitative study using semistructured interviews conducted face to face, by telephone or using Skype. A thematic analysis of the narratives was carried out. Community-based, across the UK. People were eligible to take part if they had had a close relationship (either as friend, colleague or family member) with a woman who had experienced DV, and were aged 16 or over during the time they knew the survivor. Participants were recruited via posters in community venues, social media and radio advertisement. 23 participants were recruited and interviewed; the majority were women, most were white and ages ranged from mid-20s to 80. Generated themes included: negative impacts on psychological and emotional well-being of informal supporters, and related physical health impacts. Some psychological impacts were over a limited period; others were chronic and had the potential to be severe and enduring. The impacts described suggested that those providing informal support to survivors may be experiencing secondary traumatic stress as they journey alongside the survivor. Friends and relatives of DV survivors experience substantial impact on their own health and well-being. There are no direct services to support this group. These findings have practical and policy implications, so that the needs of informal supporters are legitimised and met. Published by the BMJ Publishing Group Limited. For permission to

Airy beams on two dimensional materials

Science.gov (United States)

Imran, Muhammad; Li, Rujiang; Jiang, Yuyu; Lin, Xiao; Zheng, Bin; Dehdashti, Shahram; Xu, Zhiwei; Wang, Huaping

2018-05-01

We propose that quasi-transverse-magnetic (quasi-TM) Airy beams can be supported on two dimensional (2D) materials. By taking graphene as a typical example, the solution of quasi-TM Airy beams is studied under the paraxial approximation. The analytical field intensity in a bilayer graphene-based planar plasmonic waveguide is confirmed by the simulation results. Due to the tunability of the chemical potential of graphene, the self-accelerating behavior of the quasi-TM Airy beam can be steered effectively. 2D materials thus provide a good platform to investigate the propagation of Airy beams.

Perceptions of Supported Employment Providers: What Students with Developmental Disabilities, Families, and Educators Need to Know for Transition Planning

Science.gov (United States)

Moon, Sherril; Simonsen, Monica L.; Neubert, Debra A.

2011-01-01

The purpose of this exploratory study was to survey community rehabilitation providers (CRPs) to determine their perceptions of the skills, experiences, and information that transitioning youth with developmental disabilities (DD) and their families need to access supported employment (SE) services. Supervisors of SE from 12 CRPs across one state…

Instructor-Provided Summary Infographics to Support Online Learning

Science.gov (United States)

Elena Gallagher, Silvia; O'Dulain, Mairtin; O'Mahony, Niamh; Kehoe, Claire; McCarthy, Fintan; Morgan, Gerard

2017-01-01

Infographics are a visualisation tool that can be used to improve retention, comprehension and appeal of complex concepts. The rise of infographic use in education has facilitated new forms of application and design of these tools. Instructor-provided summary infographics are a new form of infographic, whereby key learning objectives and content…

Integration between a sales support system and a simulation tool

OpenAIRE

Wahlström, Ola

2005-01-01

InstantPlanner is a sales support system for the material handling industry, visualizing and calculating designs faster and more correctly than other tools on the market. AutoMod is a world leading simulation tool used in the material handling industry to optimize and calculate appropriate configuration designs. Both applications are favorable in their own area provide a great platform for integration with the properties of fast designing, correct product calculations, great simulation capabi...

The influence of boron dopant on the electrochemical properties of graphene as an electrode material and a support for Pt catalysts

International Nuclear Information System (INIS)

Bo, Xiangjie; Li, Mian; Han, Ce; Guo, Liping

2013-01-01

Highlights: •More defective sites in graphene after the doping of boron atoms. •Fine dispersion of Pt nanoparticles supported on boron-doped graphene. •Low electron transfer resistance at boron-doped graphene. •High performance of boron-doped graphene as an electrode material or a support for Pt catalysts. -- Abstract: Boron-doped graphene (BGR) is prepared by thermal annealing of graphene oxide (GO) in the presence of boric acid. More defective sites are introduced into GR accompanied by the doping of boron. Low electron transfer resistance towards redox probe is observed at BGR. The BGR modified electrode can effectively distinguish the anodic peaks for ascorbic acid (AA), dopamine (DA), and uric acid (UA). The defective sites of BGR can also act as anchoring sites for the deposition of Pt nanoparticles. When used as a support for Pt electrocatalysts, Pt nanoparticles with an average diameter of 3.2 nm are deposited on BGR. The doping of boron into GR facilitates the dispersion of Pt nanoparticles and increases the utilization efficiency of Pt nanoparticles. The Pt/BGR exhibits significant catalytic activity towards the oxidation of methanol. The results demonstrate that BGR is a good support for Pt catalysts or an electrode material compared with the undoped GR

Next Generation Nuclear Plant Materials Research and Development Program Plan

Energy Technology Data Exchange (ETDEWEB)

G.O. Hayner; R.L. Bratton; R.N. Wright

2005-09-01

The U.S Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed, thermal neutron spectrum reactor that will produce electricity and hydrogen in a state-of-the-art thermodynamically efficient manner. The NGNP will use very high burn-up, low-enriched uranium, TRISO-coated fuel and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Project is envisioned to demonstrate the following: (1) A full-scale prototype VHTR by about 2021; (2) High-temperature Brayton Cycle electric power production at full scale with a focus on economic performance; (3) Nuclear-assisted production of hydrogen (with about 10% of the heat) with a focus on economic performance; and (4) By test, the exceptional safety capabilities of the advanced gas-cooled reactors. Further, the NGNP program will: (1) Obtain a Nuclear Regulatory Commission (NRC) License to construct and operate the NGNP, this process will provide a basis for future performance based, risk-informed licensing; and (2) Support the development, testing, and prototyping of hydrogen infrastructures. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. The NGNP Materials R&D Program includes the following elements: (1) Developing a specific approach, program plan and other project management tools for

Stabilization of Palladium Nanoparticles on Nanodiamond-Graphene Core-Shell Supports for CO Oxidation.

Science.gov (United States)

Zhang, Liyun; Liu, Hongyang; Huang, Xing; Sun, Xueping; Jiang, Zheng; Schlögl, Robert; Su, Dangsheng

2015-12-21

Nanodiamond-graphene core-shell materials have several unique properties compared with purely sp(2) -bonded nanocarbons and perform remarkably well as metal-free catalysts. In this work, we report that palladium nanoparticles supported on nanodiamond-graphene core-shell materials (Pd/ND@G) exhibit superior catalytic activity in CO oxidation compared to Pd NPs supported on an sp(2) -bonded onion-like carbon (Pd/OLC) material. Characterization revealed that the Pd NPs in Pd/ND@G have a special morphology with reduced crystallinity and are more stable towards sintering at high temperature than the Pd NPs in Pd/OLC. The electronic structure of Pd is changed in Pd/ND@G, resulting in weak CO chemisorption on the Pd NPs. Our work indicates that strong metal-support interactions can be achieved on a non-reducible support, as exemplified for nanocarbon, by carefully tuning the surface structure of the support, thus providing a good example for designing a high-performance nanostructured catalyst. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Teaching strategies to support isiXhosa learners who receive ...

African Journals Online (AJOL)

how learners acquire learning, there is still a dearth of material on descriptions of current support provided to learners within the theoretical ... schools where the Language of Learning and Teaching (LOLT) is English and/or Afrikaans (i.e. the learner's second or third .... Languages (IIAL) policy for public comment. This.

Energy Materials Coordinating Committee (EMaCC). Annual Technical Report, Fiscal Year 2000

Energy Technology Data Exchange (ETDEWEB)

none,

2001-07-31

The Energy Materials Coordinating Committee Annual Report (attached, DOE/SC-0040) provides an annual summary of non-classified materials-related research programs supported by various elements within the Department of Energy. The EMaCC Annual Report is a useful working tool for project managers who want to know what is happening in other divisions, and it provides a guide for persons in industry and academia to the materials program within the Department. The major task of EMaCC this year was to make the Annual Report a more user-friendly document by removing redundant program information and shortening the project summaries.

DOE's Stewardship of Government-Owned Uranium Materials

International Nuclear Information System (INIS)

Jackson, J. Dale; Donaldson, Dale E.

2002-01-01

Beginning in the 1980's, a significant number of Department of Energy facilities have been shut down and are in the decommissioning process. The shutdown of additional facilities is planned. In addition, during the past several decades, the Department of Energy has loaned nuclear material to a wide variety of private and governmental institutions for research and educational purposes. Subsequent changes in the Department's priorities have reduced the need for nuclear materials to support the Department's programs. Similarly, there has been a reduction in the need for borrowed nuclear materials by organizations and institutions using nuclear materials 'on loan' from the Department. As a result, inventories of uranium material from the Department's facilities and 'on loan' must be removed and returned to the Department. This material is in the form of low enriched uranium (LEU), normal uranium (NU), and depleted uranium (DU) in various forms. This uranium material is located at over one hundred sites within the United States and overseas, including universities and laboratories. Much of this uranium is not needed to support national priorities and programs. The Department of Energy has assumed a stewardship role in managing nuclear materials throughout their life cycle, from acquisition to storage. Surplus uranium has created challenges for DOE in managing and storing the material as well as identifying opportunities for its further use. On behalf of the Department, the Oak Ridge Operations Office has been given the responsibility to implement the Department responsibilities in meeting these challenges and managing the Department's uranium materials. To support this effort, the Office of Nuclear Fuel Security and Uranium Technology within the ORO complex coordinates uranium management functions across the Department of Energy. This coordination provides DOE with a number of important benefits, among which are: consolidated management and storage of uranium; improved

The Relationship between Environmental Turbulence, Management Support, Organizational Collaboration, Information Technology Solution Realization, and Process Performance, in Healthcare Provider Organizations

Science.gov (United States)

Muglia, Victor O.

2010-01-01

The Problem: The purpose of this study was to investigate relationships between environmental turbulence, management support, organizational collaboration, information technology solution realization, and process performance in healthcare provider organizations. Method: A descriptive/correlational study of Hospital medical services process…

Truck transportation of radioactive materials

International Nuclear Information System (INIS)

Madsen, M.M.; Wilmot, E.L.

1983-01-01

Analytical models in RADTRAN II are used to calculate risks to population subgroups such as people along transport routes, people at stops, and crewman. The stops model, which calculates the dose to persons adjacent to the transport vehicle while it is stopped, frequently provides the largest contribution to incident-free radiological impacts. Components such as distances from the vehicle containing radioactive material to nearby people at stops, stop duration, and number of crew members are required for the stops model as well as other incident-free models. To provide supporting data for RADTRAN II based on operational experience, selected truck shipments of radioactive material were observed from origin to destination. Other important aspects of this program were to correlate package size to effective shipment transport index (TI) using radiological surveys and to characterize population distributions and proximities of people to the shipment at a generic truck stop

Service guidelines based on Resource Utilization Groups Version III for Home Care provide decision-making support for case managers.

Science.gov (United States)

Collister, Barbara; Stein, Glenda; Katz, Deborah; DeBruyn, Joan; Andrusiw, Linda; Cloutier, Sheila

2012-01-01

Increasing costs and budget reductions combined with increasing demand from our growing, aging population support the need to ensure that the scarce resources allocated to home care clients match client needs. This article details how Integrated Home Care for the Calgary Zone of Alberta Health Services considered ethical and economic principles and used data from the Resident Assessment Instrument for Home Care (RAI-HC) and case mix indices from the Resource Utilization Groups Version III for Home Care (RUG-III/HC) to formulate service guidelines. These explicit service guidelines formalize and support individual resource allocation decisions made by case managers and provide a consistent and transparent method of allocating limited resources.

A Comparative Study of the Effect of MgO and CaCO3 as Support Materials in the Synthesis of Carbon Nanotubes with Fe/Co as Catalyst

Directory of Open Access Journals (Sweden)

Ezekiel D. Dikio

2014-01-01

Full Text Available A comparative study of the effect of magnesium oxide and calcium carbonate as support material in the synthesis of carbon nanotubes using the catalyst Fe/Co is presented. The synthesized carbon nanotubes were characterized with Raman spectroscopy, scanning electron spectroscopy (SEM, high-resolution transmission electron microscopy (HRTEM, X-ray diffraction spectroscopy (XRD, and energy dispersive spectroscopy (EDS. The morphology of the carbon nanotubes synthesized with magnesium oxide as support material gives rise to carbon nanotubes with consistent and well-defined structure unlike that synthesized with calcium carbonate. The ID/IG ratio of synthesized carbon nanotubes (CNTs was 0.8544 for magnesium oxide supported compared to 0.8501 for calcium carbonate supported carbon nanotube.

Soil stabilization with recycled materials improves subgrade performance : research spotlight.

Science.gov (United States)

2016-02-29

The use of recycled materials for subgrade stabilization can provide the support needed for construction vehicle loading and more typical long-term traffic loading. This is a particular need in Michigan due to the prevalence of weak subgrade soils. U...

Gen IV Materials Handbook Implementation Plan

International Nuclear Information System (INIS)

Rittenhouse, P.; Ren, W.

2005-01-01

A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

Tuning the Electronic Structure of Titanium Oxide Support to Enhance the Electrochemical Activity of Platinum Nanoparticles

KAUST Repository

Shi, Feifei

2013-09-11

Two times higher activity and three times higher stability in methanol oxidation reaction, a 0.12 V negative shift of the CO oxidation peak potential, and a 0.07 V positive shift of the oxygen reaction potential compared to Pt nanoparticles on pristine TiO2 support were achieved by tuning the electronic structure of the titanium oxide support of Pt nanoparticle catalysts. This was accomplished by adding oxygen vacancies or doping with fluorine. Experimental trends are interpreted in the context of an electronic structure model, showing an improvement in electrochemical activity when the Fermi level of the support material in Pt/TiOx systems is close to the Pt Fermi level and the redox potential of the reaction. The present approach provides guidance for the selection of the support material of Pt/TiOx systems and may be applied to other metal-oxide support materials, thus having direct implications in the design and optimization of fuel cell catalyst supports. © 2013 American Chemical Society.

Rethink, Reimagine, Reinvent: The Reggio Emilia Approach to Incorporating Reclaimed Materials in Children's Artworks

Science.gov (United States)

Eckhoff, Angela; Spearman, Mindy

2009-01-01

Introducing reclaimed materials into the art classroom provides students with unique opportunities to connect ordinary, discarded objects with unique, personal artistic creations. In an effort to better understand this connection, this article explores existing pedagogical precedents that support the role of the inclusion of reclaimed materials in…

STRUCTURE RATIONALIZATION OF TANK CARS SUPPORT DEVICES FOR FLUIDS

Directory of Open Access Journals (Sweden)

M. V. Pavliuchenkov

2014-01-01

Full Text Available Purpose. Improvement of fluid tank cars structure due to development of new tank bracket support structures and their materials consumption decrease. Methodology. The investigations to search the optimal design of the support structure were conducted in order to solve such problem. At the first stage patent and bibliographic analysis of technical solutions was done, the advantages and disadvantages were revealed and new design options were proposed, the most efficient design was determined. The next step is objective function making for determining its optimal parameters, imposition of restrictions, acquisition of objective function approximation and restrictions in the form of polynomials. At the third stage numerical implementation of function optimization was proposed, optimal design parameters were determined with graphical method. Results methods have coincided. Findings. The most efficient design of support structure was determined; its optimum geometrical dimensions were described. Originality. The author provides the mathematical formulation of optimal design of tank car supports using the minimum materials consumption criteria. The graphic and numerical methods were used during the investigations. Practical value. The author proposed the finite-element models of tank car with different design execution of bracket support structures, which allow estimating the VAT of structure.

Reference methods and materials. A programme of support for regional and global marine pollution assessments

International Nuclear Information System (INIS)

1990-01-01

This document describes a programme of comprehensive support for regional and global marine pollution assessments developed by the United Nations Environment Programme (UNEP) in cooperation with the International Atomic Energy Agency (IAEA) and the Intergovernmental Oceanographic Commission (IOC) and with the collaboration of a number of other United Nations Specialized agencies including the Food and Agriculture Organisation (FAO), the World Meteorological Organisation (WMO), the World Health Organisation (WHO) and the International Maritime Organisation (IMO). Two of the principle components of this programme, Reference Methods and Reference materials are given special attention in this document and a full Reference Method catalogue is included, giving details of over 80 methods currently available or in an advanced stage of preparation and testing. It is important that these methods are seen as a functional component of a much wider strategy necessary for assuring good quality and intercomparable data for regional and global pollution monitoring and the user is encouraged to read this document carefully before employing Reference Methods and Reference Materials in his/her laboratory. 3 figs

Hazardous Materials Verification and Limited Characterization Report on Sodium and Caustic Residuals in Materials and Fuel Complex Facilities MFC-799/799A

Energy Technology Data Exchange (ETDEWEB)

Gary Mecham

2010-08-01

This report is a companion to the Facilities Condition and Hazard Assessment for Materials and Fuel Complex Sodium Processing Facilities MFC-799/799A and Nuclear Calibration Laboratory MFC-770C (referred to as the Facilities Condition and Hazards Assessment). This report specifically responds to the requirement of Section 9.2, Item 6, of the Facilities Condition and Hazards Assessment to provide an updated assessment and verification of the residual hazardous materials remaining in the Sodium Processing Facilities processing system. The hazardous materials of concern are sodium and sodium hydroxide (caustic). The information supplied in this report supports the end-point objectives identified in the Transition Plan for Multiple Facilities at the Materials and Fuels Complex, Advanced Test Reactor, Central Facilities Area, and Power Burst Facility, as well as the deactivation and decommissioning critical decision milestone 1, as specified in U.S. Department of Energy Guide 413.3-8, “Environmental Management Cleanup Projects.” Using a tailored approach and based on information obtained through a combination of process knowledge, emergency management hazardous assessment documentation, and visual inspection, this report provides sufficient detail regarding the quantity of hazardous materials for the purposes of facility transfer; it also provides that further characterization/verification of these materials is unnecessary.

Using mobile phone technology to provide recovery support for women offenders.

Science.gov (United States)

Scott, Christy K; Johnson, Kimberly; Dennis, Michael L

2013-10-01

Mobile technology holds promise as a recovery tool for people with substance use disorders. However, some populations who may benefit the most may not have access to or experience with mobile phones. Incarcerated women represent a group at high risk for recidivism and relapse to substance abuse. Cost-effective mechanisms must be in place to support their recovery upon release. This study explores using mobile technology as a recovery management tool for women offenders residing in the community following release from jail. This study surveyed 325 minority women offenders with substance use disorders to determine whether or not they use cell phones, their comfort with texting and search features, and the social networks that they access from mobile phones. We found that 83% of survey subjects had cell phones; 30% of those were smartphones. Seventy-seven percent of the women reported access to supportive friends, and 88% had close family members they contacted regularly using mobile technology. Results indicated that most of the women were comfortable using a mobile phone, although the majority of them had prepaid minutes rather than plans, and most did currently use smartphones or have the capability to download applications or access social networks via their phones. Most women reported that they would be comfortable using a mobile phone to text, e-mail, and answer surveys. The high rate of adoption of mobile technology by women offenders makes them a promising target for recovery support delivered via mobile phone.

Sexual Minority Women's Satisfaction with Health Care Providers and State-level Structural Support: Investigating the Impact of Lesbian, Gay, Bisexual, and Transgender Nondiscrimination Legislation.

Science.gov (United States)

Baldwin, Aleta M; Dodge, Brian; Schick, Vanessa; Sanders, Stephanie A; Fortenberry, J Dennis

Structural discrimination is associated with negative health outcomes among sexual minority populations. Recent changes to state-level and national legislation provide both the opportunity and the need to further explore the impact of legislation on the health indicators of sexual minorities. Using an ecosocial theory lens, the present research addresses the relationship between structural support or discrimination and satisfaction with one's health care provider among sexual minority women. Data were drawn from an online survey of sexual minority women's health care experiences. Using the Andersen Behavioral Model of Health Services Utilization to operationalize the variables in our model, we examined the relationship between state-level nondiscrimination legislation and satisfaction with provider-a widely used measure of health care quality-through regression analysis. Participants in structurally supportive states (i.e., those with nondiscrimination legislation) were more likely to disclose their sexual identity to their providers and to report higher satisfaction with their providers. The absence of nondiscrimination legislation was associated negatively with satisfaction with providers. Results of our study show that the external environment in which sexual minority women seek health care, characterized by structural support or lack thereof, is related to perceived quality of health care. Copyright © 2017 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

The first word in material control is material

International Nuclear Information System (INIS)

Martin, H.R.; Wilkey, D.D.

1989-01-01

Material control has tended to rely on containment and access control, augmented by physical inventories, to meet the material control and accounting (MC ampersand A) goals of detecting theft/diversion and providing assurance that all nuclear material (NM) is present. Such systems have significant deficiencies. Material containment strategies are generally based on protection provided at boundaries around the NM and rely on alarms at the boundary for detection of theft/diversion. Assurance that all NM is present requires a negative inference based on the absence of alarms. Additionally, design of effective boundary protection systems requires that the designer be able to anticipate and provide protection for all scenarios that the insider adversary might utilize in removing material from the facility. Access control is an administrative system that cannot protect against malevolent actions by insiders authorized to access the material. Inventories may not provide timely detection of theft/diversion, and the sensitivity of detection depends on the magnitude of the variance of the inventory difference. More effective material control is provided for both material in storage and in process by a material-oriented system designed to detect abnormal events involving NM. Abnormal events are defined as any unauthorized activity involving NM, whether accidental or deliberate, and are assessed to determine the cause of the discrepancy. The designs of material-oriented control systems vary greatly, depending on the operations involved; however, a model system would include the use of process monitoring data for material control and automated surveillance of material in storage

An information system for sustainable materials management with material flow accounting and waste input–output analysis

Directory of Open Access Journals (Sweden)

Pi-Cheng Chen

2017-05-01

Full Text Available Sustainable materials management focuses on the dynamics of materials in economic and environmental activities to optimize material use efficiency and reduce environmental impact. A preliminary web-based information system is thus developed to analyze the issues of resource consumption and waste generation, enabling countries to manage resources and wastes from a life cycle perspective. This pioneering system features a four-layer framework that integrates information on physical flows and economic activities with material flow accounting and waste input–output table analysis. Within this framework, several applications were developed for different waste and resource management stakeholders. The hierarchical and interactive dashboards allow convenient overview of economy-wide material accounts, waste streams, and secondary resource circulation. Furthermore, the system can trace material flows through associated production supply chain and consumption activities. Integrated with economic models; this system can predict the possible overloading on the current waste management facility capacities and provide decision support for designing strategies to approach resource sustainability. The limitations of current system are specified for directing further enhancement of functionalities.

Accelerated Aging of Polymer Composite Bridge Materials

Energy Technology Data Exchange (ETDEWEB)

Carlson, Nancy Margaret; Blackwood, Larry Gene; Torres, Lucinda Laine; Rodriguez, Julio Gallardo; Yoder, Timothy Scott

1999-03-01

Accelerated aging research on samples of composite material and candidate ultraviolet (UV) protective coatings is determining the effects of six environmental factors on material durability. Candidate fastener materials are being evaluated to determine corrosion rates and crevice corrosion effects at load-bearing joints. This work supports field testing of a 30-ft long, 18-ft wide polymer matrix composite (PMC) bridge at the Idaho National Engineering and Environmental Laboratory (INEEL). Durability results and sensor data from tests with live loads provide information required for determining the cost/benefit measures to use in life-cycle planning, determining a maintenance strategy, establishing applicable inspection techniques, and establishing guidelines, standards, and acceptance criteria for PMC bridges for use in the transportation infrastructure.

Delving into the heart of materials

CERN Multimedia

Caroline Duc

2012-01-01

In the middle of September, the HiRadMat platform was equipped with a new test bench designed by CERN teams, which should provide a greater insight into how matter behaves when impacted by high-energy, high-intensity particle beams.   Section of the new machine where images of the sample fragments being projected upon beam impact are recorded. The HiRadMat – High Irradiation to Materials – facility is designed to test the resistance to high-intensity beams of materials or components destined for particle accelerators. As part of the EU programme EUCARD, which finances a number of R&D projects including one to develop new materials for protecting the LHC against accidental beam losses, CERN's Mechanical and Materials Engineering (MME) Group, supported by teams from the EN, BE, TE and PH Departments, has designed a machine capable of testing six different materials in a single experiment. In total, twelve rows of up to ten 40-mm-diameter samples can be subjecte...

THE INFLUENCE OF IMPLEMENTING THE STRATEGIC POLICY IN CREATING BUSINESS CLIMATE, BUSINESS ENVIRONMENT AND PROVIDING SUPPORT FACILITIES TOWARDS BUSINESS EMPOWERMENT ON SMALL MEDIUM CRAFT ENTERPRISES IN AMBON INDONESIA

Directory of Open Access Journals (Sweden)

Josef Papilaya

2015-04-01

Full Text Available This study aims at analyzing and explaining whether there was the influence of implementing the strategic policy in creating business climate, business environment and providing support facilities towards empowerment on small and medium enterprises as well as whether there is synchronously influence of implementing the strategic policy in creating business climate, business environment and providing support facilities for business empowerment on small and medium scale enterprises through a survey in the city of Ambon. The results show, that there is a positive and significant effect of implementing the strategic policy in creating business climate to empower small and medium enterprises. There is a positive and significant effect on the business environment toward the empowerment of small and medium enterprises, there is a positive and significant effect of providing support facilities toward the empowerment of small and medium enterprises, and there is a positive and significant simultaneously effect in business climate, business environment and support facilities for business towards the empowerment of small business in Ambon city. Empowerment programs are conducted to maintain a conducive business climate, including: 1. the innovation promotion, 2. enhancing human resources through training development; 3. providing financial support, 4. giving support to the marketing strategy, 5. opening the business partnership. While the supporting facilities granted to small and medium enterprises including: 1. giving the fishing boat for the Fishermen, 2. providing the workshop (machine shop service facilities to small crafts business Enterprises, 3. establish vendors for small enterprises, 4. provide the area for street vendors, 5. provide tents for merchants culinary who work at night. Providing the assistance to encourage the business climate and create conducive business environment.

Materials Technology Support for Radioisotope Power Systems Final Report

Energy Technology Data Exchange (ETDEWEB)

Daniel P. Kramer; Chadwick D. Barklay

2008-10-07

Over the period of this sponsored research, UDRI performed a number of materials related tasks that helped to facilitate increased understanding of the properties and applications of a number of candidate program related materials including; effects of neutron irradiation on tantalum alloys using a 500kW reactor, thermodynamic based modeling of the chemical species in weld pools, and the application of candidate coatings for increased oxidation resistance of FWPF (Fine Weave Pierced Fabric) modules.

Materials Technology Support for Radioisotope Power Systems Final Report

International Nuclear Information System (INIS)

Kramer, Daniel P.; Barklay, Chadwick D.

2008-01-01

Over the period of this sponsored research, UDRI performed a number of materials related tasks that helped to facilitate increased understanding of the properties and applications of a number of candidate program related materials including; effects of neutron irradiation on tantalum alloys using a 500kW reactor, thermodynamic based modeling of the chemical species in weld pools, and the application of candidate coatings for increased oxidation resistance of FWPF (Fine Weave Pierced Fabric) modules

Supporting device for Toroidal coils

International Nuclear Information System (INIS)

Araki, Takao.

1985-01-01

Purpose: To reduce the response of a toroidal coil supporting device upon earthquakes and improve the earthquake proofness in a tokamak type thermonuclear device. Constitution: Structural materials having large longitudinal modulus and enduring great stresses, for example, stainless steels are used as the toroidal coil supporting legs and heat insulating structural materials are embedded in a nuclear reactor base mats below the supporting legs. Furthermore, heat insulating concretes are spiked around the heat insulating structural materials to prevent the intrusion of heat to the toroidal coils. The toroidal coils are kept at cryogenic state and superconductive state for the conductors. In this way, the period of proper vibrations of the toroidal coils and the toroidal coil supporting structures can be shortened thereby decreasing the seismic response. Furthermore, since the strength of the supporting legs is increased, the earthquake proofness of the coils can be improved. (Kamimura, M.)

Outstanding low temperature HC-SCR of NOx over platinum-group catalysts supported on mesoporous materials expecting diesel-auto emission regulation

International Nuclear Information System (INIS)

Komatsu, Tamikuni; Tomokuni, Keizou; Yamada, Issaku

2006-01-01

Outstanding low temperature HC-SCR of NOx over platinum-group catalysts supported on mesoporous materials, which does not rely on the conventional NOx-absorption-reduction-catalysts, is presented for the purpose of de-NOx of diesel-auto emissions. The established catalysts basically consist of mesoporous silica or metal-substituted mesoporous silicates for supports and platinum for active species, which is operated under lean- and rich-conditions. The new catalysts are very active at 150-200 o C and free from difficult problems of SOx-deactivation and hydrothermal ageing of the NOx-absorption-reduction catalyst. (author)

Flexible and self-powered temperature-pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials.

Science.gov (United States)

Zhang, Fengjiao; Zang, Yaping; Huang, Dazhen; Di, Chong-an; Zhu, Daoben

2015-09-21

Skin-like temperature- and pressure-sensing capabilities are essential features for the next generation of artificial intelligent products. Previous studies of e-skin and smart elements have focused on flexible pressure sensors, whereas the simultaneous and sensitive detection of temperature and pressure with a single device remains a challenge. Here we report developing flexible dual-parameter temperature-pressure sensors based on microstructure-frame-supported organic thermoelectric (MFSOTE) materials. The effective transduction of temperature and pressure stimuli into two independent electrical signals permits the instantaneous sensing of temperature and pressure with an accurate temperature resolution of pressure-sensing sensitivity of up to 28.9 kPa(-1). More importantly, these dual-parameter sensors can be self-powered with outstanding sensing performance. The excellent sensing properties of MFSOTE-based devices, together with their unique advantages of low cost and large-area fabrication, make MFSOTE materials possess promising applications in e-skin and health-monitoring elements.

Comparing a Mobile Decision Support System Versus the Use of Printed Materials for the Implementation of an Evidence-Based Recommendation: Protocol for a Qualitative Evaluation.

Science.gov (United States)

Camacho, Jhon; Medina Ch, Ana María; Landis-Lewis, Zach; Douglas, Gerald; Boyce, Richard

2018-04-13

The distribution of printed materials is the most frequently used strategy to disseminate and implement clinical practice guidelines, although several studies have shown that the effectiveness of this approach is modest at best. Nevertheless, there is insufficient evidence to support the use of other strategies. Recent research has shown that the use of computerized decision support presents a promising approach to address some aspects of this problem. The aim of this study is to provide qualitative evidence on the potential effect of mobile decision support systems to facilitate the implementation of evidence-based recommendations included in clinical practice guidelines. We will conduct a qualitative study with two arms to compare the experience of primary care physicians while they try to implement an evidence-based recommendation in their clinical practice. In the first arm, we will provide participants with a printout of the guideline article containing the recommendation, while in the second arm, we will provide participants with a mobile app developed after formalizing the recommendation text into a clinical algorithm. Data will be collected using semistructured and open interviews to explore aspects of behavioral change and technology acceptance involved in the implementation process. The analysis will be comprised of two phases. During the first phase, we will conduct a template analysis to identify barriers and facilitators in each scenario. Then, during the second phase, we will contrast the findings from each arm to propose hypotheses about the potential impact of the system. We have formalized the narrative in the recommendation into a clinical algorithm and have developed a mobile app. Data collection is expected to occur during 2018, with the first phase of analysis running in parallel. The second phase is scheduled to conclude in July 2019. Our study will further the understanding of the role of mobile decision support systems in the implementation

Nuclear material accounting handbook

International Nuclear Information System (INIS)

2008-01-01

The handbook documents existing best practices and methods used to account for nuclear material and to prepare the required nuclear material accounting reports for submission to the IAEA. It provides a description of the processes and steps necessary for the establishment, implementation and maintenance of nuclear material accounting and control at the material balance area, facility and State levels, and defines the relevant terms. This handbook serves the needs of State personnel at various levels, including State authorities, facility operators and participants in training programmes. It can assist in developing and maintaining accounting systems which will support a State's ability to account for its nuclear material such that the IAEA can verify State declarations, and at the same time support the State's ability to ensure its nuclear security. In addition, the handbook is useful for IAEA staff, who is closely involved with nuclear material accounting. The handbook includes the steps and procedures a State needs to set up and maintain to provide assurance that it can account for its nuclear material and submit the prescribed nuclear material accounting reports defined in Section 1 and described in Sections 3 and 4 in terms of the relevant agreement(s), thereby enabling the IAEA to discharge its verification function as defined in Section 1 and described in Sections 3 and 4. The contents of the handbook are based on the model safeguards agreement and, where applicable, there will also be reference to the model additional protocol. As a State using The handbook consists of five sections. In Section 1, definitions or descriptions of terms used are provided in relation to where the IAEA applies safeguards or, for that matter, accounting for and control of nuclear material in a State. The IAEA's approach in applying safeguards in a State is also defined and briefly described, with special emphasis on verification. In Section 2, the obligations of the State

Site Support Program Plan Infrastructure Program

International Nuclear Information System (INIS)

1995-01-01

The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site's infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford's infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition

The role of prosthetic abutment material on the stress distribution in a maxillary single implant-supported fixed prosthesis

International Nuclear Information System (INIS)