Effect of N-acetylcysteine on the accuracy of the prothrombin time assay of plasma coagulation factor II+VII+X activity in subjects infused with the drug. Influence of time and temperature

DEFF Research Database (Denmark)

Thorsen, Sixtus; Teisner, Ane; Jensen, Søren Astrup

2009-01-01

OBJECTIVES: The prothrombin time (PT) assay of factor II+VII+X activity is an important predictor of liver damage in paracetamol poisoned patients. It complicates interpretation of results that the antidote, acetylcysteine (NAC) depresses this activity. The aim was to investigate if NAC influences...... to plasma in vitro decreased factor II+VII+X activity at 37 degrees C in a time-dependent manner. This effect was quenched at temperatures ... to a significant additional depression of factor II+VII+X activity in plasma from subjects infused with NAC during the first 3h of infusion indicating that it contained reactive NAC. The risk that this NAC interfered with the accuracy of the PT assay was considered minimal with samples stored below 24 degrees C...

Antiphosphatidylserine/prothrombin (aPS/PT) antibodies are associated with Raynaud phenomenon and migraine in primary thrombotic antiphospholipid syndrome.

Science.gov (United States)

Kopytek, M; Natorska, J; Undas, A

2018-04-01

Objectives Antibodies to phosphatidylserine/prothrombin complex (aPS/PT) detectable in sera of some patients with antiphospholipid syndrome (APS) have been shown to correlate with thrombosis. However, associations of aPS/PT antibodies with APS related disorders remain unclear. Aim To evaluate whether there are any associations between aPS/PT antibodies and Raynaud phenomenon, migraine and/or valvular lesions in primary thrombotic APS (PAPS). Methods We enrolled 67 consecutive patients (56 women) with thrombotic PAPS (VTE in 80.6%), aged 46.2 ± 13.5 years. The exclusion criteria were: acute coronary syndromes or stroke within preceding 6 months, cancer, severe comorbidities and pregnancy. The IgG and IgM aPS/PT antibodies were determined by ELISA with the cut-off of 30 units. We recorded Raynaud phenomenon, migraine and valvular lesions. Results Positive IgM or/and IgG aPS/PT antibodies were observed in 29 patients (43.3%), with a higher prevalence of IgM antibodies ( n = 27, 40.3%) compared with IgG isotype ( n = 12, 17.9%, p = 0.014). aPS/PT antibodies were observed most commonly in patients with triple aPL ( n = 12, 85.7%) compared with those with double ( n = 5, 35.7%) or single aPL antibodies (n = 12, 30.8%, p = 0.03), with no association with demographics, the ANA titre, the type of thrombotic events or medications. Raynaud phenomenon, migraine and valvular lesions were observed in 15% ( n = 10), 30% ( n = 20) and 18% ( n = 12) of the patients, respectively. Raynaud phenomenon and migraine, but not valvular lesions, were markedly more frequent in PAPS patients presenting with positive aPS/PT antibodies ( n = 10, 34.5% vs. n = 0, 0%; p = 0.0001). Conclusions In PAPS patients aPS/PT antibodies are related to the occurrence of both Raynaud phenomenon and migraine.

Characteristics of scrub typhus, murine typhus, and Q fever among elderly patients: Prolonged prothrombin time as a predictor for severity.

Science.gov (United States)

Chang, Ko; Lee, Nan-Yao; Ko, Wen-Chien; Lin, Wei-Ru; Chen, Yen-Hsu; Tsai, Jih-Jin; Chen, Tun-Chieh; Lin, Chun-Yu; Chang, Ya-Ting; Lu, Po-Liang

2017-06-22

The clinical manifestations of scrub typhus, murine typhus and acute Q fever in the elderly are not clear. We conducted a retrospective study to identify the characteristics of the elderly aged ≥65 years with a comparison group aged 18-64 years among patients with scrub typhus, murine typhus, or acute Q fever who were serologically confirmed at three hospitals in Taiwan during 2002-2011. Among 441 cases, including 187 cases of scrub typhus, 166 acute Q fever, and 88 murine typhus, 68 (15.4%) cases were elderly patients. The elderly had a higher severe complication rate (10.3% vs. 3.5%, p = 0.022), but did not have a significantly higher mortality rate (1.47% vs. 0.54%, p = 0.396). Compared with those without severe complications, we found the elderly (p = 0.022), dyspnea (p = 0.006), less relative bradycardia (p = 0.004), less febrile illness (p = 0.004), prolonged prothrombin time (PT) (p = 0.002), higher levels of initial C-reactive protein (p = 0.039), blood leukocyte counts (p = 0.01), and lower platelet counts (p = 0.012) are significantly associated with severe complications. Only prolonged prothrombin time was associated with severe complications in multivariate analysis (p = 0.018, CI 95% 0.01-0.66). Among clinical symptoms and laboratory data, multivariate analysis revealed chills was less frequently occurred in the elderly (p = 0.012, 95% confidence interval [CI]: 1.33-9.99). The elderly cases with scrub typhus, murine typhus, or acute Q fever would be more likely to have severe complications, for which prothrombin time prolongation is an important predictor for severe complications. Copyright © 2017. Published by Elsevier B.V.

Effect of N-acetylcysteine on the accuracy of the prothrombin time assay of plasma coagulation factor II+VII+X activity in subjects infused with the drug. Influence of time and temperature.

Science.gov (United States)

Thorsen, Sixtus; Teisner, Ane; Jensen, Søren Astrup; Philips, Malou; Dalhoff, Kim; Bendtsen, Flemming

2009-01-01

The prothrombin time (PT) assay of factor II+VII+X activity is an important predictor of liver damage in paracetamol poisoned patients. It complicates interpretation of results that the antidote, acetylcysteine (NAC) depresses this activity. The aim was to investigate if NAC influences the accuracy of the plasma PT assay. The accuracy of Nycotest PT was studied using plasma added NAC in vitro and plasma from subjects infused with NAC. The latter results were compared with those obtained by analysis of PT by CoaguChek S. Therapeutic NAC concentrations added to plasma in vitro decreased factor II+VII+X activity at 37 degrees C in a time-dependent manner. This effect was quenched at temperatures depression of factor II+VII+X activity in plasma from subjects infused with NAC during the first 3h of infusion indicating that it contained reactive NAC. The risk that this NAC interfered with the accuracy of the PT assay was considered minimal with samples stored below 24 degrees C. This was supported by similarity of results obtained by analysis of appropriately stored plasma and simultaneously drawn blood by CoaguChek S. Residual reactive NAC does not interfere with the accuracy of the PT assay of plasma stored below 24 degrees C, but NAC-induced loss in activity at 37 degrees C may be partly recovered during subsequent storage below 24 degrees C.

Microangiopathic antiphospholipid antibody syndrome due to anti-phosphatidylserine/prothrombin complex IgM antibody.

Science.gov (United States)

Senda, Yumi; Ohta, Kazuhide; Yokoyama, Tadafumi; Shimizu, Masaki; Furuichi, Kengo; Wada, Takashi; Yachie, Akihiro

2017-03-01

Herein we describe a case of microangiopathic antiphospholipid syndrome (MAPS) due to anti-phosphatidylserine/prothrombin complex (aPS/PT) IgM antibody successfully treated with rituximab. A significant correlation was observed between the clinical course and the aPS/PT IgM antibody titer, which can rise earlier before the appearance of clinical symptoms. Rituximab can be safely and effectively used for MAPS. Although detection of only aPS/PT IgM antibody is rare, aPS/PT IgM antibody might be associated with the pathogenesis of MAPS and might be a useful marker of disease activity. © 2017 Japan Pediatric Society.

Antiphosphatidylserine/prothrombin antibodies (aPS/PT) as potential diagnostic markers and risk predictors of venous thrombosis and obstetric complications in antiphospholipid syndrome.

Science.gov (United States)

Shi, Hui; Zheng, Hui; Yin, Yu-Feng; Hu, Qiong-Yi; Teng, Jia-Lin; Sun, Yue; Liu, Hong-Lei; Cheng, Xiao-Bing; Ye, Jun-Na; Su, Yu-Tong; Wu, Xin-Yao; Zhou, Jin-Feng; Norman, Gary L; Gong, Hui-Yun; Shi, Xin-Ming; Peng, Yi-Bing; Wang, Xue-Feng; Yang, Cheng-De

2018-03-28

The aim of the study was to determine the prevalence and clinical associations of antiphosphatidylserine/prothrombin antibodies (aPS/PT) with thrombosis and pregnancy loss in Chinese patients with antiphospholipid syndrome (APS) and seronegative APS (SNAPS). One hundred and eighty six Chinese patients with APS (67 primary, 119 secondary), 48 with SNAPS, 176 disease controls (79 systemic lupus erythematosus [SLE], 29 Sjogren's syndrome [SS], 30 ankylosing spondylitis [AS], 38 rheumatoid arthritis [RA]) and 90 healthy donors were examined. IgG and IgM aPS/PT, IgG/IgM/IgA anticardiolipin (aCL) and IgG/IgM/IgA anti-β2-glycoprotein I (anti-β2GPI) antibodies were tested by ELISA. One hundred and sixty (86.0%) of APS patients were positive for at least one aPS/PT isotype. One hundred and thirty five (72.6%) were positive for IgG aPS/PT, 124/186 (66.7%) positive for IgM aPS/PT and 99 (53.2%) positive for both. Approximately half of the SNAPS patients were positive for IgG and/or IgM aPS/PT. Highly significant associations between IgG aPS/PT and venous thrombotic events (odds ratio [OR]=6.72) and IgG/IgM aPS/PT and pregnancy loss (OR=9.44) were found. Levels of IgM aPS/PT were significantly different in APS patients with thrombotic manifestations and those with fetal loss (p=0.014). The association between IgG/IgM aPS/PT and lupus anticoagulant (LAC) was highly significant (pAPS was 101.6. Notably, 91.95% (80/87) of LAC-positive specimens were positive for IgG and/or IgM aPS/PT, suggesting aPS/PT is an effective option when LAC testing is not available. Anti-PS/PT antibody assays demonstrated high diagnostic performance for Chinese patients with APS, detected some APS patients negative for criteria markers and may serve as potential risk predictors for venous thrombosis and obstetric complications.

Antiphosphatidylserine/prothrombin antibodies as biomarkers to identify severe primary antiphospholipid syndrome.

Science.gov (United States)

Hoxha, Ariela; Mattia, Elena; Tonello, Marta; Grava, Chiara; Pengo, Vittorio; Ruffatti, Amelia

2017-05-01

Anti-phosphatidylserine/prothrombin (aPS/PT) antibodies have begun to be considered potentional biomarkers for antiphospholipid syndrome (APS). This cohort study investigate the role of aPS/PT antibodies as a risk factor for severe APS by evaluating the association between those antibodies and clinical/laboratory profiles of APS. Plasma/serum samples from 197 APS patients, 100 healthy subjects and 106 patients with autoimmune diseases were collected. IgG/IgM aPS/PT antibodies were assayed using commercial ELISA kit. Prevalences of IgG and IgM aPS/PT (pantiphospholipid antibody patients than in double and single positivity ones (p<0.0001 for all). APS/PT antibodies were associated to severe thrombosis, severe pregnancy complications inducing prematurity, and vascular microangiopathy, all generally associated to high risk APS forms requiring strong therapy.

Effect of N-acetylcysteine on the accuracy of the prothrombin time assay of plasma coagulation factor II plus VII plus X activity in subjects infused with the drug. Influence of time and temperature

DEFF Research Database (Denmark)

Thorsen, S.; Teisner, A.; Jensen, S.A.

2009-01-01

Objectives: The prothrombin time (PT) assay of factor II+VII+X activity is an important predictor of liver damage in paracetamol poisoned patients. It complicates interpretation of results that the antidote, acetylcysteine (NAC) depresses this activity. The aim was to investigate if NAC influences...... added to plasma in vitro decreased factor II+VII+X activity at 37 degrees C in a time-dependent manner. This effect was quenched at temperatures 24 degrees C. Activity lost at 37 degrees C could partly be recovered by subsequent incubation at 5 or 20 degrees C. Incubation at 37 degrees C prior to assay...... led to a significant additional depression of factor II+VII+X activity in plasma from subjects infused with NAC during the first 3h of infusion indicating that it contained reactive NAC. The risk that this NAC interfered with the accuracy of the PT assay was considered minimal with samples stored...

Anti-prothrombin antibodies are associated with adverse pregnancy outcome.

Science.gov (United States)

Marozio, Luca; Curti, Antonella; Botta, Giovanni; Canuto, Emilie M; Salton, Loredana; Tavella, Anna Maria; Benedetto, Chiara

2011-11-01

Women with antiphospholipid antibodies (aPL) such as lupus anticoagulant, anticardiolipin antibodies, and anti-β(2) glycoprotein-1 antibodies are at high risk of late pregnancy complications, such as severe pre-eclampsia, placental insufficiency, and fetal loss. It has been observed that aPL consists of a heterogeneous group of antibodies targeting several phospholipid-binding plasma proteins, including also anti-prothrombin (anti-PT), anti-protein S (anti-PS), and anti-protein C (anti-PC) antibodies. Their potential role in late pregnancy complications is not known. The aim of this work was to investigate the association between those autoantibodies and histories for adverse pregnancy outcome. Anti-PT, anti-PS, and anti-PC antibodies were evaluated in 163 patients with previous severe pre-eclampsia, fetal death, and/or placental abruption and in as many women with previous uneventful pregnancies, negative for aPL. The prevalence of anti-PT antibodies was higher in cases than in controls (OR, 95% CI: 10.92, 4.52-26.38). The highest prevalence was observed in subjects with fetal death. Anti-PT antibodies appear to be associated with adverse pregnancy outcome, irrespectively of aPL. © 2011 John Wiley & Sons A/S.

Recombinant snake venom prothrombin activators

OpenAIRE

L?vgren, Ann

2012-01-01

Three prothrombin activators; ecarin, which was originally isolated from the venom of the saw-scaled viper Echis carinatus, trocarin from the rough-scaled snake Tropidechis carinatus, and oscutarin from the Taipan snake Oxyuranus scutellatus, were expressed in mammalian cells with the purpose to obtain recombinant prothrombin activators that could be used to convert prothrombin to thrombin. We have previously reported that recombinant ecarin can efficiently generate thrombin without the need ...

Is it acceptable to use coagulation plasma samples stored at room temperature and 4°C for 24 hours for additional prothrombin time, activated partial thromboplastin time, fibrinogen, antithrombin, and D-dimer testing?

Science.gov (United States)

Rimac, V; Coen Herak, D

2017-10-01

Coagulation laboratories are faced on daily basis with requests for additional testing in already analyzed fresh plasma samples. This prompted us to examine whether plasma samples stored at room temperature (RT), and 4°C for 24 hours can be accepted for additional prothrombin time (PT), activated partial thromboplastin time (aPTT), fibrinogen (Fbg), antithrombin (AT), and D-dimer testing. We measured PT, aPTT, Fbg in 50 and AT in 30 plasma samples with normal and pathological values, within 4 hours of blood collection (baseline results) and after 24-hours storage at RT (primary tubes), and 4°C (aliquots). D-dimer stability was investigated in 20 samples stored in primary tubes at 4°C. No statistically significant difference between baseline results and results in samples stored at RT and 4°C was observed for PT (P=.938), aPTT (P=.186), Fbg (P=.962), AT (P=.713), and D-dimers (P=.169). The highest median percentage changes were found for aPTT, being more pronounced for samples stored at 4°C (13.0%) than at RT (8.7%). Plasma samples stored both at RT and 4°C for 24 hours are acceptable for additional PT, Fbg, and AT testing. Plasma samples stored 24 hours in primary tubes at 4°C are suitable for D-dimer testing. © 2017 John Wiley & Sons Ltd.

Anti-phosphatidylserine/prothrombin antibodies: an additional diagnostic marker for APS?

Science.gov (United States)

Pregnolato, Francesca; Chighizola, Cecilia B; Encabo, Susan; Shums, Zakera; Norman, Gary L; Tripodi, Armando; Chantarangkul, Veena; Bertero, Tiziana; De Micheli, Valeria; Borghi, Maria Orietta; Meroni, Pier Luigi

2013-07-01

Among the diagnostic assays for anti-phospholipid syndrome (APS), lupus anticoagulant (LA) is the strongest predictor of thrombosis; however, it presents several limitations as interference with anticoagulant therapy and poor inter-laboratory agreement. Two-thirds of LA activity is apparently due to antibodies against prothrombin (PT), usually detectable by ELISA. Binding of PT to phosphatidylserine (PS) has been shown to enhance solid-phase anti-PT assay sensitivity. To determine the prevalence of antibodies against PS/PT (aPS/PT) in APS, we tested the semiquantitative QUANTA Lite(®) aPS/PT ELISA in a cohort of 80 APS patients. The prevalence of aPS/PT was 81.3%, rising to 87.6% when considering LA-positive subjects only. We observed a strong correlation between aPS/PT and LA (p = 0.006). To note, APS patients with thrombotic manifestations displayed significantly higher IgG aPS/PT titers compared to 20 aPL asymptomatic carriers (p = 0.012). To rule out a possible cross-reactivity of anti-β2 glycoprotein I antibodies (aβ2GPI) with PS/PT complex, we tested two monoclonal aβ2GPI antibodies and an affinity-purified (AP) polyclonal aβ2GPI IgG obtained from the serum of a patient reacting against both β2GPI and PS/PT. The two monoclonal antibodies did not show any reactivity against PS/PT complex, similarly the AP IgGs did not react toward PS/PT antigen while preserved their aβ2GPI activity. Our findings suggest that aPS/PT are a definite antibody population in APS. Moreover, the good correlation between aPS/PT ELISA and LA may support its use as a surrogate test for LA, particularly useful to overcome the technical limitations of the functional assay.

Effect of acetylcysteine on prothrombin index in paracetamol poisoning without hepatocellular injury

DEFF Research Database (Denmark)

Schmidt, Lars E; Knudsen, Tore Tveit; Dalhoff, Kim

2002-01-01

Acetylcysteine treatment reduces liver damage after paracetamol overdose, but can affect the prothrombin index, which is used to assess the progress of overdose patients. We aimed to assess retrospectively the effect of intravenous acetylcysteine on the prothrombin index in patients with paraceta......Acetylcysteine treatment reduces liver damage after paracetamol overdose, but can affect the prothrombin index, which is used to assess the progress of overdose patients. We aimed to assess retrospectively the effect of intravenous acetylcysteine on the prothrombin index in patients...... with paracetamol poisoning without signs of hepatocellular injury. Prothrombin index had been recorded before, and serially during, acetylcysteine treatment in 87 patients. After initiation of treatment, prothrombin index decreased (mean 0.33, 95% CI 0.29-0.38) in all patients, and was strongly associated...... with the start of acetylcysteine infusion. In patients with uncomplicated paracetamol poisoning, a fall in this index might be misinterpreted as a sign of liver failure, leading to prolonged treatment time....

21 CFR 864.7720 - Prothrombin consumption test.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Prothrombin consumption test. 864.7720 Section 864.7720 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Hematology Kits and Packages § 864.7720 Prothrombin...

Elevated prothrombin time on routine preoperative laboratory results in a healthy infant undergoing craniosynostosis repair: Diagnosis and perioperative management of congenital factor VII deficiency.

Science.gov (United States)

Jones, Kareen L; Greenberg, Robert S; Ahn, Edward S; Kudchadkar, Sapna R

2016-01-01

Congenital factor VII deficiency is a rare bleeding disorder with high phenotypic variability. It is critical that children with congenital Factor VII deficiency be identified early when high-risk surgery is planned. Cranial vault surgery is common for children with craniosynostosis, and these surgeries are associated with significant morbidity mostly secondary to the risk of massive blood loss. A two-month old infant who presented for elective craniosynostosis repair was noted to have an elevated prothrombin time (PT) with a normal activated partial thromboplastin time (aPTT) on preoperative labs. The infant had no clinical history or reported family history of bleeding disorders, therefore a multidisciplinary decision was made to repeat the labs under general anesthesia and await the results prior to incision. The results confirmed the abnormal PT and the case was canceled. Hematologic workup during admission revealed factor VII deficiency. The patient underwent an uneventful endoscopic strip craniectomy with perioperative administration of recombinant Factor VIIa. Important considerations for perioperative laboratory evaluation and management in children with factor VII deficiency are discussed. Anesthetic and surgical management of the child with factor VII deficiency necessitates meticulous planning to prevent life threatening bleeding during the perioperative period. A thorough history and physical examination with a high clinical suspicion are vital in preventing hemorrhage during surgeries in children with coagulopathies. Abnormal preoperative lab values should always be confirmed and addressed before proceeding with high-risk surgery. A multidisciplinary discussion is essential to optimize the risk-benefit ratio during the perioperative period. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Valores de referência do tempo de protrombina (TP e tempo de tromboplastina parcial ativada (TTPa em cães Reference ranges of prothrombin time (PT and activated partial thromboplastin time (aPTT in dogs

Directory of Open Access Journals (Sweden)

Sonia Terezinha dos Anjos Lopes

2005-04-01

Full Text Available Os fatores de coagulação são parte integrante da hemostasia normal, e tanto as coagulopatias hereditárias como adquiridas que envolvem este sistema são de grande importância veterinária, geralmente evidenciadas por manifestações clínicas, tais como, petéquias, equimoses, hematomas e sangramentos tardios. O presente trabalho teve por objetivo a determinação dos valores de referência do tempo de protrombina (TP e tempo de tromboplastina parcial ativada (TTPa, por métodos manuais. Para tanto, utilizou-se "kits" para dosagens humanas, devido à inexistência de produtos similares de uso específico veterinário. Foram utilizados 40 cães clinicamente sadios, sem raça definida, machos ou fêmeas, de diferentes idades. As amostras sanguíneas foram de 2,5ml cada, colhidas por venopunção cefálica e acondicionadas em tubos de centrífuga contendo 0,25ml de citrato de sódio a 3,8%. O plasma foi imediatamente separado por centrifugação e as determinações de TP e TTPa foram realizadas utilizando-se "kits" comerciais "HemoStat Thromboplastin-SIª" e "HemoStat aPTT-El b", respectivamente. Os resultados obtidos foram de 6,87 ± 1,4 segundos para o TP com valores mínimo e máximo de 4,07 e 9,67, respectivamente, e de 15,10 ± 1,6 segundos para TTPa com valores mínimo e máximo de 11,9 e 18,3, respectivamente. Conclui-se, que os valores obtidos neste trabalho podem ser utilizados como referência. Os reagentes utilizados para plasma humano podem ser empregados para o plasma de cães.The coagulation factors are part of normal hemostasis, and both hereditary and acquired coagulopathies that involve this system have an important role in veterinary medicine, generally evidenced by clinical signs such as: petechias, ecchymosis, hematomas and late hemorrhagies. The objective of this experiment was to determine reference range values of prothrombin time (PT and activated partial thromboplastin time (aPTT, for manual methods. Human commercial

Time-invariant PT product and phase locking in PT -symmetric lattice models

Science.gov (United States)

Joglekar, Yogesh N.; Onanga, Franck Assogba; Harter, Andrew K.

2018-01-01

Over the past decade, non-Hermitian, PT -symmetric Hamiltonians have been investigated as candidates for both a fundamental, unitary, quantum theory and open systems with a nonunitary time evolution. In this paper, we investigate the implications of the former approach in the context of the latter. Motivated by the invariance of the PT (inner) product under time evolution, we discuss the dynamics of wave-function phases in a wide range of PT -symmetric lattice models. In particular, we numerically show that, starting with a random initial state, a universal, gain-site location dependent locking between wave-function phases at adjacent sites occurs in the PT -symmetry-broken region. Our results pave the way towards understanding the physically observable implications of time invariants in the nonunitary dynamics produced by PT -symmetric Hamiltonians.

Pneumatic tube system transport does not alter platelet function in optical and whole blood aggregometry, prothrombin time, activated partial thromboplastin time, platelet count and fibrinogen in patients on anti-platelet drug therapy

Science.gov (United States)

Enko, Dietmar; Mangge, Harald; Münch, Andreas; Niedrist, Tobias; Mahla, Elisabeth; Metzler, Helfried; Prüller, Florian

2017-01-01

Introduction The aim of this study was to assess pneumatic tube system (PTS) alteration on platelet function by the light transmission aggregometry (LTA) and whole blood aggregometry (WBA) method, and on the results of platelet count, prothrombin time (PT), activated partial thromboplastin time (APTT), and fibrinogen. Materials and methods Venous blood was collected into six 4.5 mL VACUETTE® 9NC coagulation sodium citrate 3.8% tubes (Greiner Bio-One International GmbH, Kremsmünster, Austria) from 49 intensive care unit (ICU) patients on dual anti-platelet therapy and immediately hand carried to the central laboratory. Blood samples were divided into 2 Groups: Group 1 samples (N = 49) underwent PTS (4 m/s) transport from the central laboratory to the distant laboratory and back to the central laboratory, whereas Group 2 samples (N = 49) were excluded from PTS forces. In both groups, LTA and WBA stimulated with collagen, adenosine-5’-diphosphate (ADP), arachidonic acid (AA) and thrombin-receptor-activated-peptide 6 (TRAP-6) as well as platelet count, PT, APTT, and fibrinogen were performed. Results No statistically significant differences were observed between blood samples with (Group 1) and without (Group 2) PTS transport (P values from 0.064 – 0.968). The AA-induced LTA (bias: 68.57%) exceeded the bias acceptance limit of ≤ 25%. Conclusions Blood sample transportation with computer controlled PTS in our hospital had no statistically significant effects on platelet aggregation determined in patients with anti-platelet therapy. Although AA induced LTA showed a significant bias, the diagnostic accuracy was not influenced. PMID:28392742

Tempo de protrombina e de tromboplastina parcial ativada em caprinos criados extensivamente no Estado do Rio Grande do Norte Prothrombin time and activated partial thromboplastin time in goats raised extensively at Rio Grande do Norte State, Brazil

Directory of Open Access Journals (Sweden)

Benito Soto-Blanco

2009-03-01

Full Text Available Neste trabalho objetivou-se estabelecer os padrões de normalidade para tempo de protrombina (TP e tempo de tromboplastina parcial ativada (TTPA em caprinos criados extensivamente no estado do Rio Grande do Norte. Foram utilizados 40 caprinos SRD, 13 machos e 27 fêmeas, adultos, com idades entre 1 e 6 anos, todos clinicamente sadios. As amostras sanguíneas foram coletadas por venopunção jugular em tubos contendo citrato de sódio a 3,8%. O plasma foi imediatamente separado por centrifugação e refrigerado a ± 4ºC e, posteriormente, submetido às determinações de TP e TTPA por meio de métodos manuais utilizando kits comerciais. Os valores obtidos para caprinos da região, de 25,4 ± 0,90 e 39,5 ± 1,41 segundos para TP e TTPA, respectivamente, estavam dentro da normalidade.This study aimed to establish normal pattern for the prothrombin time (PT and activated partial thromboplastin time (APTT in goats extensively raised at Rio Grande do Norte state, Brazil. A total of 40 clinically healthy adult goats (13 males and 27 females aged 1 to 6 years-old was used. Blood samples were collected from jugular vein in tubes containing 3.8% of sodium citrate. The plasma was immediately separated by centrifugation and refrigerated at ± 4ºC and after submitted to PT e APTT determinations through manual methods using commercial kits. The results for goats in the region of 25.4 ± 0.90 and 39.5 ± 1.41 seconds, respectively, for PT and APTT were in an adequate range.

An evaluation of patient self-testing competency of prothrombin time for managing anticoagulation: pre-randomization results of VA Cooperative Study #481--The Home INR Study (THINRS).

Science.gov (United States)

Dolor, Rowena J; Ruybalid, R Lynne; Uyeda, Lauren; Edson, Robert G; Phibbs, Ciaran; Vertrees, Julia E; Shih, Mei-Chiung; Jacobson, Alan K; Matchar, David B

2010-10-01

Prior studies suggest patient self-testing (PST) of prothrombin time (PT) can improve the quality of anticoagulation (AC) and reduce complications (e.g., bleeding and thromboembolic events). "The Home INR Study" (THINRS) compared AC management with frequent PST using a home monitoring device to high-quality AC management (HQACM) with clinic-based monitoring on major health outcomes. A key clinical and policy question is whether and which patients can successfully use such devices. We report the results of Part 1 of THINRS in which patients and caregivers were evaluated for their ability to perform PST. Study-eligible patients (n = 3643) were trained to use the home monitoring device and evaluated after 2-4 weeks for PST competency. Information about demographics, medical history, warfarin use, medications, plus measures of numeracy, literacy, cognition, dexterity, and satisfaction with AC were collected. Approximately 80% (2931 of 3643) of patients trained on PST demonstrated competency; of these, 8% (238) required caregiver assistance. Testers who were not competent to perform PST had higher numbers of practice attempts, higher cuvette wastage, and were less able to perform a fingerstick or obtain blood for the cuvette in a timely fashion. Factors associated with failure to pass PST training included increased age, previous stroke history, poor cognition, and poor manual dexterity. A majority of patients were able to perform PST. Successful home monitoring of PT with a PST device required adequate levels of cognition and manual dexterity. Training a caregiver modestly increased the proportion of patients who can perform PST.

Clinical factors influencing normalization of prothrombin time after stopping warfarin: a retrospective cohort study

Directory of Open Access Journals (Sweden)

Zondag Michelle

2008-10-01

Full Text Available Abstract Background Anticoagulation with warfarin should be stopped 4–6 days before invasive procedures to avoid bleeding complications. Despite this routine, some patients still have high International Normalized Ratio (INR values on the day of surgery and the procedure may be cancelled. We sought to identify easily available clinical characteristics that may influence the rate of normalization of prothrombin time when warfarin is stopped before surgery or invasive procedures. Methods Clinical data were collected retrospectively from consecutive cases from two cohorts, who stopped warfarin 6 days before surgery. An INR value of 1.6 or higher on the day of surgery or requirement for reversal with vitamin K the day before surgery were criteria for slow return (S to normal INR. Results Of 202 patients, 14 (7% were classified as S. Eight of the S-patients required reversal with vitamin K one day before surgery and in another case surgery was cancelled due to high INR. Baseline INR was the only variable significantly associated with classification as S in stepwise logistic regression analysis (p = 0.003. The odds ratio for being in the normal group was 0.27 (95% confidence interval 0.12–0.62 for each unit baseline INR increased. The positive predictive value of baseline INR with a cut off at > 3.0 was only 15% and for INR > 3.5 it was 33%. Conclusion Baseline INR, but not the size of the maintenance dose, is associated with the rate of normalization of prothrombin time after stopping warfarin, but it has limited utility as predictor in clinical practice. Whenever normal hemostasis is considered crucial for the safety, the INR should be checked again before the invasive procedure.

Phosphatidylserine-dependent anti-prothrombin antibodies (aPS/PT) in infliximab-treated patients with inflammatory bowel diseases.

Science.gov (United States)

Malíčková, Karin; Ďuricová, Dana; Bortlík, Martin; Janatková, Ivana; Zima, Tomáš; Lukáš, Milan

2013-04-01

To (1) examine the occurrence and concentrations of aPS/PT and aPL in inflammatory bowel disease (IBD) patients at the beginning of and during anti-TNF-alpha therapy with infliximab; (2) investigate the link of the aPS/PT and aPL presence with antibodies to infliximab (ATI) formation; and (3) examine possible clinical consequences of aPS/PT and/or aPL positivity in IBD patients. Thirty (30) IBD patients treated with infliximab were analyzed regarding aPS/PT, aPL, and ATI antibody serum levels by standardized ELISAs at treatment weeks 2 (W2) and 14 (W14). At W2, 40 % of infliximab-treated patients had elevated aPS/PT and 16.7 % had elevated aPL serum levels. At W14, the proportion of aPS/PT-positive sera decreased to 16.6 %, whereas aPL distribution remained unchanged. Moreover, concentrations of aPS/PT have shown significant differences at W2 (16.64 [10.06; 33.06] U for IgG and 18.46 [9.18; 32.48] U for IgM) and at W14 (8.24 [2.78; 19.82] U for IgG and 8.57 [5.55; 26.82] U for IgM), p = 0.009 and p = 0.003, respectively. In ATI-positive samples, aPS/PT IgG were more frequent (p = 0.001 for W2 and p = 0.003 for W14), whereas aPS/PT IgM and aPL IgG/IgM did not show such association. Higher concentrations of aPS/PT IgG and IgM were found in IBD patients at the beginning of the biological treatment period compared to the maintenance treatment period. Moreover, aPS/PT IgG were more frequent in ATI-positive individuals, which was not observed in aPL. We speculate that there is a relationship between the aPS/PT and the severity of inflammation and auto-aggressive processes in IBD.

Antibodies to Phosphatidylserine/Prothrombin Complex in Antiphospholipid Syndrome: Analytical and Clinical Perspectives.

Science.gov (United States)

Peterson, Lisa K; Willis, Rohan; Harris, E Nigel; Branch, Ware D; Tebo, Anne E

2016-01-01

Antiphospholipid syndrome (APS) is an autoimmune disorder characterized by thrombosis and/or pregnancy-related morbidity accompanied by persistently positive antiphospholipid antibodies (aPL). Current laboratory criteria for APS classification recommend testing for lupus anticoagulant as well as IgG and IgM anticardiolipin, and beta-2 glycoprotein I (anti-β2GPI) antibodies. However, there appears to be a subset of patients with classical APS manifestations who test negative for the recommended criteria aPL tests. While acknowledging that such patients may have clinical features that are not of an autoimmune etiology, experts also speculate that these "seronegative" patients may test negative for relevant autoantibodies as a result of a lack of harmonization and/or standardization. Alternatively, they may have aPL that target other antigens involved in the pathogenesis of APS. In the latter, autoantibodies that recognize a phosphatidylserine/prothrombin (PS/PT) complex have been reported to be associated with APS and may have diagnostic relevance. This review highlights analytical and clinical attributes associated with PS/PT antibodies, taking into consideration the performance characteristics of criteria aPL tests in APS with specific recommendations for harmonization and standardization efforts. © 2016 Elsevier Inc. All rights reserved.

Plasma lipids and prothrombin time in rats fed palm oil and other commonly used fats in Egypt

Directory of Open Access Journals (Sweden)

Hussein, Mona M.

1993-02-01

Full Text Available Sprague-Dawley rats were fed for a total period of 8 weeks on six diets that were different in the source of their fat content. The fat content was provided either, palm oil or palm olein or corn oil or hydrogenated fat, or frying palm oil and mixture of corn oil + hydrogenated fat in the ratio (1:1. The latter was given to the control group. Animals fed these various experimental diets showed statistically significant differences in serum cholesterol and serum triglycerides content among all group. Increased HDL-cholesterol content was evident in animals fed on palm-olein and palm oil. The frying oil fed group showed lowest HDL-cholesterol content. In these experiments palm olein fed animals showed highest ratio of HDL-cholesterol to total cholesterol while the lowest ratio was shown in rats fed on frying oil. Prothrombin (PT and activated partial thromboplastin time (PTT showed higher values In palm oil, palm olein and corn oil diets as compared to all groups with each other.

Ratas Sprague-Dawley fueron alimentadas durante un periodo total de 8 semanas con seis dietas diferentes en su contenido graso. El contenido graso fue proporcionado por aceite de palma u oleína de palma o aceite de maíz o grasa hidrogenada o aceite de palma de fritura y mezcla de aceite de maíz + grasa hidrogenada en la relación (1:1. El último fue dado al grupo de control. Los animales alimentados con las diferentes dietas experimentales mostraron diferencias significativas estadísticamente en el contenido en colesterol y triglicéridos en suero entre todos los grupos. El aumento en contenido HDL-colesterol fue evidente en animales alimentados con oleína de palma y aceite de palma. El grupo alimentado con aceite de fritura mostró el más bajo contenido en HDL-colesterol. En estos experimentos, los animales alimentados con oleína de palma mostraron la mayor relación de HDL-colesterol a colesterol total, mientras que la relación más baja fue mostrada

High risk of coagulopathy among Type-2 Diabetes Mellitus clients at ...

African Journals Online (AJOL)

Background: Persistent hyperglycaemia in diabetes mellitus causes coagulopathies due to glycation of haemoglobin, prothrombin, fibrinogen and other proteins involved in the clotting mechanism. Shortened activated partial thromboplastin time (APTT) and prothrombin time (PT) reflect hypercoagulable state, which is ...

Decreased prothrombin conversion and reduced thrombin inactivation explain rebalanced thrombin generation in liver cirrhosis.

Directory of Open Access Journals (Sweden)

Romy M W Kremers

Full Text Available Impaired coagulation factor synthesis in cirrhosis causes a reduction of most pro- and anticoagulant factors. Cirrhosis patients show no clear bleeding or thrombotic phenotype, although they are at risk for both types of hemostatic event. Thrombin generation (TG is a global coagulation test and its outcome depends on underlying pro- and anticoagulant processes (prothrombin conversion and thrombin inactivation. We quantified the prothrombin conversion and thrombin inactivation during TG in 30 healthy subjects and 52 Child-Pugh (CP- A, 15 CP-B and 6 CP-C cirrhosis patients to test the hypothesis that coagulation is rebalanced in liver cirrhosis patients. Both prothrombin conversion and thrombin inactivation are reduced in cirrhosis patients. The effect on pro- and anticoagulant processes partially cancel each other out and as a result TG is comparable at 5 pM tissue factor between healthy subjects and patients. This supports the hypothesis of rebalanced hemostasis, as TG in cirrhosis patients remains within the normal range, despite large changes in prothrombin conversion and thrombin inactivation. Nevertheless, in silico analysis shows that normalization of either prothrombin conversion or thrombin inactivation to physiological levels, by for example the administration of prothrombin complex concentrates would cause an elevation of TG, whereas the normalization of both simultaneously maintains a balanced TG. Therefore, cirrhosis patients might require adapted hemostatic treatment.

The Story of Serum Prothrombin Conversion Accelerator, Proconvertin, Stable Factor, Cothromboplastin, Prothrombin Accelerator or Autoprothrombin I, and Their Subsequent Merging into Factor VII.

Science.gov (United States)

Girolami, Antonio; Cosi, Elisabetta; Santarossa, Claudia; Ferrari, Silvia; Luigia Randi, Maria

2015-06-01

Factor VII (FVII) deficiency is one of the two congenital coagulation disorders that was not discovered by the description of a new bleeding patient whose clotting pattern did not fit the blood coagulation knowledge of the time (the other is factor XIII deficiency). The existence of an additional factor capable of accelerating the conversion of prothrombin into thrombin was suspected before 1951, the year in which the first family with FVII deficiency was discovered. As several investigators were involved in the discovery of FVII deficiency from both sides of the Atlantic, several different names were tentatively suggested to define this entity, namely stable factor (in contrast with labile factor or FV), cothromboplastin, proconvertin, serum prothrombin conversion accelerator, prothrombin acceleration, and autoprothrombin I. The last term was proposed by those who denied the existence of this new entity, which was instead considered to be a derivate of prothrombin activation, namely autoprothrombin. The description of several families, from all over the world, of the same defect, however clearly demonstrated the singularity of the condition. Factor VII was then proposed to define this protein. In subsequent years, several variants were described with peculiar reactivity toward tissue thromboplastins of different origin. Molecular biology techniques demonstrated several gene mutations, usually missense mutations, often involving exon 8 of the FVII gene. Later studies dealt with the relation of FVII with tissue factor and activated FVII (FVIIa). The evaluation of circulating FVIIa was made possible by the use of a truncated form of tissue factor, which is only sensitive to FVIIa present in the circulation. The development of FVII concentrates, both plasma derived and recombinant, has facilitated therapeutic management of FVII-deficient patients. The use of FVIIa concentrates was noted to be associated with the occasional occurrence of thrombotic events, mainly

Parametric amplification and bidirectional invisibility in PT -symmetric time-Floquet systems

Science.gov (United States)

Koutserimpas, Theodoros T.; Alù, Andrea; Fleury, Romain

2018-01-01

Parity-time (PT )-symmetric wave devices, which exploit balanced interactions between material gain and loss, exhibit extraordinary properties, including lasing and flux-conserving scattering processes. In a seemingly different research field, periodically driven systems, also known as time-Floquet systems, have been widely studied as a relevant platform for reconfigurable active wave control and manipulation. In this article, we explore the connection between PT -symmetry and parametric time-Floquet systems. Instead of relying on material gain, we use parametric amplification by considering a time-periodic modulation of the refractive index at a frequency equal to twice the incident signal frequency. We show that the scattering from a simple parametric slab, whose dynamics follows the Mathieu equation, can be described by a PT -symmetric scattering matrix, whose PT -breaking threshold corresponds to the Mathieu instability threshold. By combining different parametric slabs modulated out of phase, we create PT -symmetric time-Floquet systems that feature exceptional scattering properties, such as coherent perfect absorption (CPA)-laser operation and bidirectional invisibility. These bidirectional properties, rare for regular PT -symmetric systems, are related to a compensation of parametric amplification due to multiple scattering between two parametric systems modulated with a phase difference.

Clinical performance of antibodies to prothrombin and thrombin in Chinese patients with antiphospholipid syndrome: potential interest in discriminating patients with thrombotic events and non-thrombotic events.

Science.gov (United States)

Zhang, Shulan; Wu, Ziyan; Li, Jing; Li, Ping; Chen, Si; Wen, Xiaoting; Li, Liubing; Zhang, Wen; Zhao, Jiuliang; Zhang, Fengchun; Li, Yongzhe

2017-04-01

A hallmark feature of antiphospholipid syndrome (APS) is the presence of a wide spectrum of antiphospholipid antibodies. In this study, we evaluated the clinical relevance of antibodies to prothrombin (PT) (aPT) and thrombin (aThr) in Chinese patients with APS. A total of 229 subjects were tested, including 86 patients with APS [35 patients with primary APS (PAPS), 51 patients with APS associated with other diseases (APSAOD)], 104 patients with non-APS diseases (disease controls), and 39 healthy controls. Serum IgG/IgM/IgA aPT and aThr were determined by ELISA. The levels of both IgG/IgM/IgA aPT and IgG/IgM/IgA aThr were significantly increased in patients with PAPS and APSAOD compared with patients with non-APS thrombosis and non-APS PRM, and HC. Both IgG aPT and IgG aThr exhibited promising diagnostic potentials for APS with sensitivities and specificities of 16.3 and 95.8% (IgG aPT), and 19.8 and 99.3% (IgG aThr), respectively. Importantly, both IgG aPT (OR 4.06; 95% CI 1.49-11.05) and IgG aThr (OR 4.49; 95% CI 1.62-12.45) were significantly correlated with arterial, but not venous, thrombotic events. Our findings highlighted that IgG aPT and IgG aThr could serve as promising biomarkers to identify patients at risk of arterial thrombosis in China.

Plasma fibrin clot properties in the G20210A prothrombin mutation carriers following venous thromboembolism: the effect of rivaroxaban.

Science.gov (United States)

Janion-Sadowska, Agnieszka; Natorska, Joanna; Siudut, Jakub; Ząbczyk, Michal; Stanisz, Andrzej; Undas, Anetta

2017-08-30

We sought to investigate whether the G20210A prothrombin mutation modifies plasma fibrin clot properties in patients after venous thromboembolism (VTE) and how rivaroxaban treatment affects these alterations. We studied 34 prothrombin mutation heterozygous carriers and sex- and age-matched 34 non-carriers, all at least three months since the first VTE episode, before and during treatment with rivaroxaban. Clot permeability (K s ) and clot lysis time (CLT) with or without elimination of thrombin activatable fibrinolysis inhibitor (TAFI) were assessed at baseline, 2-6 hours (h) after and 20-25 h after intake of rivaroxaban (20 mg/day). At baseline, the prothrombin mutation group formed denser clots (K s -12 %, p=0.0006) and had impaired fibrinolysis (CLT +14 %, p=0.004, and CLT-TAFI +13 %, p=0.03) compared with the no mutation group and were similar to those observed in 15 healthy unrelated prothrombin mutation carriers. The G20210A prothrombin mutation was the independent predictor for K s and CLT before rivaroxaban intake. At 2-6 h after rivaroxaban intake, clot properties improved in both G20210A carriers and non-carriers (K s +38 %, and +37 %, CLT -25 % and -25 %, CLT-TAFI -20 % and -24 %, respectively, all pCLT +17 %, CLT-TAFI +13 %, all p<0.001). Rivaroxaban concentration correlated with fibrin clot properties. After 20-25 h since rivaroxaban intake most clot properties returned to baseline. Rivaroxaban-related differences in clot structure were confirmed by scanning electron microscopy images. In conclusion, rivaroxaban treatment, though improves fibrin clot properties, cannot abolish more prothrombotic fibrin clot phenotype observed in prothrombin mutation carriers following VTE.

Prothrombin complex concentrate in the reduction of blood loss during orthotopic liver transplantation: PROTON-trial

NARCIS (Netherlands)

F. Arshad (Freeha); B. Ickx (Brigitte); R.T. van Beem (Rachel); W.G. Polak (Wojciech); F. Grüne (Frank); F. Nevens (Frederik); M. Ilmakunnas (Minna); A.M. Koivusalo (Anna-Maria); H. Isoniemi (Helena); P.F.W. Strengers; H.J.M. Groen (Henk); H.G.D. Hendriks (Herman); T. Lisman (Ton); J. Pirenne (Jacques); R.J. Porte (Robert)

2013-01-01

textabstractBackground: In patients with cirrhosis, the synthesis of coagulation factors can fall short, reflected by a prolonged prothrombin time. Although anticoagulants factors are decreased as well, blood loss during orthotopic liver transplantation can still be excessive. Blood loss during

Prothrombin complex concentrate in the reduction of blood loss during orthotopic liver transplantation : PROTON-trial

NARCIS (Netherlands)

Arshad, Freeha; Ickx, Brigitte; van Beem, Rachel T.; Polak, Wojciech; Grune, Frank; Nevens, Frederik; Ilmakunnas, Minna; Koivusalo, Anna-Maria; Isoniemi, Helena; Strengers, Paul F. W.; Groen, Henk; Hendriks, Herman G. D.; Lisman, Ton; Pirenne, Jacques; Porte, Robert J.

2013-01-01

Background: In patients with cirrhosis, the synthesis of coagulation factors can fall short, reflected by a prolonged prothrombin time. Although anticoagulants factors are decreased as well, blood loss during orthotopic liver transplantation can still be excessive. Blood loss during orthotopic liver

Prothrombin fragment 1+2 in urine as a marker on coagulation activity in patients with suspected pulmonary embolism.

Science.gov (United States)

Wexels, Fredrik; Dahl, Ola E; Pripp, Are H; Seljeflot, Ingebjørg; Borris, Lars C; Haslund, Anniken; Gudmundsen, Tor E; Lauritzen, Trine; Lassen, Michael R

2014-07-01

We have recently reported that increased levels of urine prothrombin fragment 1+2 reflected radiologically verified deep vein thrombosis. In this study we evaluated whether urine prothrombin fragment 1+2 was associated with pulmonary embolism in non-selected patients. Patients with clinical suspected pulmonary embolism were interviewed on comorbidities and medications. Urine was collected from each patient before radiological examination and snap frozen until analysed on urine prothrombin fragment 1+2 with an ELISA kit. Imaging of the pulmonary arteries were conducted with contrast enhanced computer tomography. Pulmonary embolism was diagnosed in 44/197 patients. Non-significantly higher urine prothrombin fragment 1+2 levels were found in non-selected patients with pulmonary embolism vs. those without (p=0.324). Significantly higher urine prothrombin fragment 1+2 levels were found in the pulmonary embolism positive patients without comorbidities (n=13) compared to the control group (n=28) (p=0.009). The calculated sensitivity, specificity and negative predictive value using the lowest detectable urine prothrombin fragment 1+2 level was 82%, 34% and 87%, respectively. There was no significant urine prothrombin fragment 1+2 level difference in patients with and without pulmonary embolism. In non-comorbide pulmonary embolism positive patients the urine prothrombin fragment 1+2 levels were significantly higher compared to the control group. The negative predictive value found in this study indicates that uF1+2 has the potential to identify patients with a low risk of PE. Copyright © 2014 Elsevier Ltd. All rights reserved.

Prolonged activated prothromboplastin time and breed specific variation in haemostatic analytes in healthy adult Bernese Mountain dogs

DEFF Research Database (Denmark)

Nielsen, Lise; Wiinberg, Bo; Kjelgaard-Hansen, Mads

2011-01-01

Coagulation tests are often performed in dogs suspected of haemostatic dysfunction and are interpreted according to validated laboratory reference intervals (RIs). Breed specific RIs for haematological and biochemical analytes have previously been identified in Bernese Mountain dogs, but it remains...... to be determined if breed specific RIs are necessary for haemostasis tests. Activated prothromboplastin time (aPTT), prothrombin time (PT), selected coagulation factors, D-dimers, fibrinogen, von Willebrand factor and thromboelastography (TEG) were analyzed in healthy Bernese Mountain dogs using the CLSI model...

Impact of infusion speed on the safety and effectiveness of prothrombin complex concentrate

OpenAIRE

Pabinger , Ingrid; Tiede , Andreas; Kalina , Uwe; Knaub , Sigurd; Germann , Reinhard; Ostermann , Helmut

2009-01-01

Abstract Prothrombin complex concentrate (PCC) infusion is preferred for emergency reversal of coumarin therapy. Rapid infusion can potentially save crucial time; however, the possible impact of high infusion speed on PCC safety and effectiveness has not been delineated. In a prospective multinational clinical trial with 43 patients receiving PCC (Beriplex? P/N) for emergency reversal of coumarin therapy, infusion speeds were selected by the investigators. In a two-phase statistica...

Large time-dependent coercivity and resistivity modification under sustained voltage application in a Pt/Co/AlOx/Pt junction.

NARCIS (Netherlands)

Brink, van den A.; van der Heijden, M.A.J.; Swagten, H.J.M.; Koopmans, B.

2015-01-01

The coercivity and resistivity of a Pt/Co/AlOx/Pt junction are measured under sustained voltage application. High bias voltages of either polarity are determined to cause a strongly enhanced, reversible coercivity modification compared to low voltages. Time-resolved measurements show a logarithmic

21 CFR 864.7735 - Prothrombin-proconvertin test and thrombotest.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Prothrombin-proconvertin test and thrombotest. 864.7735 Section 864.7735 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Hematology Kits and Packages § 864...

WEST AFRICAN JOURNAL OF MEDICINE

African Journals Online (AJOL)

user1

... time; MCS, Microscopy, culture, and sensitivity; PT, Prothrombin time; TMJ, ... OBJECTIF: Cet article présente les communes orofaciales ... OBJECTIVE: This article presents the common orofacial .... accident, bite, sport injuries,19 and.

Time-dependent electric field in Al/CdTe/Pt detectors

Energy Technology Data Exchange (ETDEWEB)

Turturici, A.A. [Dipartimento di Fisica e Chimica,Università di Palermo,Viale delle Scienze, Edificio 18, Palermo 90128 (Italy); Abbene, L., E-mail: leonardo.abbene@unipa.it [Dipartimento di Fisica e Chimica,Università di Palermo,Viale delle Scienze, Edificio 18, Palermo 90128 (Italy); Franc, J.; Grill, R.; Dědič, V. [Institute of Physics of Charles University, MFF, Ke Karlovu 5, Prague 2 (Czech Republic); Principato, F. [Dipartimento di Fisica e Chimica,Università di Palermo,Viale delle Scienze, Edificio 18, Palermo 90128 (Italy)

2015-09-21

Al/CdTe/Pt detectors are very attractive devices for high-resolution X-ray spectroscopy, even though they suffer from bias-induced time instability (polarization). Polarization phenomena cause a progressive time-degradation of the spectroscopic performance of the detectors, due to hole trapping and detrapping from deep acceptor levels that directly control the electric field distribution. In this work we present experimental investigations on the electric field profile of planar Al/CdTe/Pt detectors by means of Pockels effect measurements. The time/temperature dependence of the electric field was investigated in a long time window (up to 10 h) and the correlation with the reverse current transients was also studied. Two energy levels (0.62 eV and 1.16 eV) of the deep hole traps were measured, in agreement with our previous results obtained through electrical and spectroscopic approaches.

Effect of Pt coverage in Pt-deposited Pd nanostructure electrodes on electrochemical properties

Energy Technology Data Exchange (ETDEWEB)

Park, Ah-Reum; Lee, Young-Woo; Kwak, Da-Hee; Park, Kyung-Won [Soongsil University, Seoul (Korea, Republic of)

2015-06-15

We have fabricated Pt-deposited Pd electrodes via a two-gun sputtering deposition system by separately operating Pd and Pt target as a function of sputtering time of Pt target. For Pt-deposited Pd electrodes (Pd/Pt-X), Pd were first deposited on the substrates at 20 W for 5min, followed by depositing Pt on the Pd-only electrodes as a function of sputtering time (X=1, 3, 5, 7, and 10min) at 20W on the Pt target. As the sputtering time of Pt target increased, the portion of Pt on the Pd electrodes increased, representing an increased coverage of Pt on the Pd electrodes. The Pd/Pt-7 electrode having an optimized Pt coverage exhibits an excellent electrocatalytic activity for methanol oxidation reaction.

Prothrombin Complex Concentrate for Intracerebral Hemorrhage Secondary to Vitamin K Deficiency Bleeding in a 6-Week-Old Child.

Science.gov (United States)

Rech, Megan A; Wittekindt, Lindsay; Friedman, Samantha D; Kling, Kendall; Ubogy, David

2015-12-01

Four-factor prothrombin complex concentrate is approved for use of life-threatening bleeding secondary to vitamin K antagonism in adults. We describe the use of four-factor prothrombin complex concentrate for hemostasis in a 6-week-old child with life-threatening vitamin K dependent-bleeding who never received vitamin K prophylaxis at birth. Copyright © 2015 Elsevier Inc. All rights reserved.

Fibrinogen Test

Science.gov (United States)

... thrombotic episode ) As a follow-up to an abnormal bleeding disorder test ( prothrombin time, PT or partial thromboplastin time, ... to help diagnose disseminated intravascular coagulation (DIC) or abnormal ... status of a progressive disease (such as liver disease ) over time or, rarely, ...

D-Dimer and prothrombin fragment 1 + 2 in urine and plasma in patients with clinically suspected venous thromboembolism.

Science.gov (United States)

Wexels, Fredrik; Seljeflot, Ingebjørg; Pripp, Are H; Dahl, Ola E

2016-06-01

Increased levels of urine prothrombin fragment 1 + 2 was recently reported to be associated with imaging-verified venous thromboembolism. In this study we evaluated the relationship between plasma D-dimer and plasma and urine prothrombin fragment 1 + 2 in patients with suspected venous thromboembolism. Urine and blood samples were collected from patients with suspected pulmonary embolism or deep vein thrombosis. The samples were analysed with commercially available ELISA kits. The diagnosis of venous thromboembolism was verified with contrast-enhanced computer tomography of the pulmonary arteries or lower extremity deep vein compression ultrasound and venography as appropriate. Venous thromboembolism was diagnosed in 150 of 720 patients. Significantly higher levels of plasma D-dimer and prothrombin fragment 1 + 2 in plasma and urine were found in those with imaging-confirmed venous thromboembolism versus those without (P fragment 1 + 2 in plasma. Further development of ELISA analyses for urine testing of prothrombin fragment 1 + 2 may improve its diagnostic accuracy.

Effects of the Electrodeposition Time in the Synthesis of Carbon-Supported Pt(Cu and Pt-Ru(Cu Core-Shell Electrocatalysts for Polymer Electrolye Fuel Cells

Directory of Open Access Journals (Sweden)

Griselda Caballero-Manrique

2016-08-01

Full Text Available Pt(Cu/C and Pt-Ru(Cu/C electrocatalysts with core-shell structure supported on Vulcan Carbon XC72R have been synthesized by potentiostatic deposition of Cu nanoparticles on the support, galvanic exchange with Pt and spontaneous deposition of Ru species. The duration of the electrodeposition time of the different species has been modified and the obtained electrocatalysts have been characterized using electrochemical and structural techniques. The High Resolution Transmission Electron Microscopy (HRTEM, Fast Fourier Transform (FFT and Energy Dispersive X-ray (EDX microanalyses allowed the determining of the effects of the electrodeposition time on the nanoparticle size and composition. The best conditions identified from Cyclic Voltammetry (CV corresponded to onset potentials for CO and methanol oxidation on Pt-Ru(Cu/C of 0.41 and 0.32 V vs. the Reversible Hydrogen Electrode (RHE, respectively, which were smaller by about 0.05 V than those determined for Ru-decorated commercial Pt/C. The CO oxidation peak potentials were about 0.1 V smaller when compared to commercial Pt/C and Pt-Ru/C. The positive effect of Cu was related to its electronic effect on the Pt shells and also to the generation of new active sites for CO oxidation. The synthesis conditions to obtain the best performance for CO and methanol oxidation on the core-shell Pt-Ru(Cu/C electrocatalysts were identified. When compared to previous results in literature for methanol, ethanol and formic acid oxidation on Pt(Cu/C catalysts, the present results suggest an additional positive effect of the deposited Ru species due to the introduction of the bifunctional mechanism for CO oxidation.

Prothrombin G20210A mutation, hypogonadotropic hypogonadism, and generalized vitiligo-related ischemic stroke in a young adult.

Science.gov (United States)

Varoglu, Asuman Orhan; Kocatürk, Idris; Tatar, Abdulgani

2010-06-01

Cerebral infarction is a rare neurological situation in young adults, usually caused by genetic factors. We report here a case of multiple cerebral infarctions with prothrombin G20210A mutation, hypogonadotropic hypogonadism, and generalized vitiligo as a first case report. A 17-year-old female adolescent was admitted to our clinic due to a change in mental status. The patient's neurological examination revealed loss of consciousness and the presence of tetraparesia. Generalized vitiligo was also detected. Magnetic resonance imaging (MRI) and diffusion-weighted investigations (DWIs) showed acute ischemic stroke in the bilateral cerebellum, pons and left occipital regions. Heterozygote prothrombin G20210A mutation was found upon genetic examination. She had never had a menstrual cycle. Laboratory data revealed that the level of luteinizing hormone (LH) was 0.5 mIU/mL (1.1-11.6) and follicle-stimulating hormone (FSH) was 1.7 mIU/mL (2.8-11.3). Therefore, she was diagnosed with hypogonadotropic hypogonadism. The causes of ischemic stroke are heterozygote prothrombin G20210A mutation, generalized vitiligo, and hypogonadotropic hypogonadism. After treatment, the patient's neurological deficit partially improved and she was discharged. In order to identify the etiology of ischemic stroke, we suggest physicians take into account heterozygote prothrombin G20210A mutation and endocrine abnormalities, especially hypogonadotropic hypogonadism and generalized vitiligo.

High risk of cerebral-vein thrombosis in carriers of a prothrombin-gene mutation and in users of oral contraceptives.

Science.gov (United States)

Martinelli, I; Sacchi, E; Landi, G; Taioli, E; Duca, F; Mannucci, P M

1998-06-18

Idiopathic cerebral-vein thrombosis can cause serious neurologic disability. We evaluated risk factors for this disorder, including genetic risk factors (mutations in the genes encoding factor V and prothrombin) and nongenetic risk factors (such as the use of oral contraceptive agents). We compared the prevalence of these risk factors in 40 patients with cerebral-vein thrombosis, 80 patients with deep-vein thrombosis of the lower extremities, and 120 healthy controls. The G1691A mutation in the factor V gene and the G20210A prothrombin-gene mutation, which are established genetic risk factors for venous thrombosis, were studied. We also assessed the use of oral contraceptives and other risk factors for thrombosis. The prevalence of the prothrombin-gene mutation was higher in patients with cerebral-vein thrombosis (20 percent) than in healthy controls (3 percent; odds ratio, 10.2; 95 percent confidence interval, 2.3 to 31.0) and was similar to that in patients with deep-vein thrombosis (18 percent). Similar results were obtained for the mutation in the factor V gene. The use of oral contraceptives was more frequent among women with cerebral-vein thrombosis (96 percent) than among controls (32 percent; odds ratio, 22.1; 95 percent confidence interval, 5.9 to 84.2) and among those with deep-vein thrombosis (61 percent; odds ratio, 4.4; 95 percent confidence interval, 1.1 to 17.8). For women who were taking oral contraceptives and who also had the prothrombin-gene mutation (seven patients with cerebral-vein thrombosis but only one control), the odds ratio for cerebral-vein thrombosis rose to 149.3 (95 percent confidence interval, 31.0 to 711.0). Mutations in the prothrombin gene and the factor V gene are associated with cerebral-vein thrombosis. The use of oral contraceptives is also strongly and independently associated with the disorder. The presence of both the prothrombin-gene mutation and oral-contraceptive use raises the risk of cerebral-vein thrombosis further.

Des-γ-Carboxy Prothrombin (DCP as a Potential Autologous Growth Factor for the Development of Hepatocellular Carcinoma

Directory of Open Access Journals (Sweden)

Yu-Sheng Zhang

2014-08-01

Full Text Available Des-γ-carboxy prothrombin (DCP is a prothrombin precursor produced in hepatocellular carcinoma (HCC. Because of deficiency of vitamin K or γ-glutamyl carboxylase in HCC cells, the 10 glutamic acid (Glu residues in prothrombin precursor did not completely carboxylate to γ-carboxylated glutamic acid (Gla residues, leaving some Glu residues remained in N-terminal domain. These prothrombin precursors with Glu residues are called DCPs. DCP displays insufficient coagulation activity. Since Liebman reported an elevated plasma DCP in patients with HCC, DCP has been used in the diagnosis of HCC. Recently, its biological malignant potential has been specified to describe DCP as an autologous growth factor to stimulate HCC growth and a paracrine factor to integrate HCC with vascular endothelial cells. DCP was found to stimulate HCC growth through activation of the DCP-Met-JAK1-STAT3 signaling pathway. DCP might increase HCC invasion and metastasis through activation of matrix metalloproteinase (MMPs and the ERK1/2 MAPK signaling pathway. DCP has also been found to play a crucial role in the formation of angiogenesis. DCP could increase the angiogenic factors released from HCC and vascular endothelial cells. These effects of DCP in angiogenesis might be related to activation of the DCP-KDR-PLC-γ-MAPK signaling pathway. In this article, we summarized recent studies on DCP in biological roles related to cancer progression and angiogenesis in HCC.

Structure–activity relationships of the human prothrombin kringle-2 peptide derivative NSA9: anti-proliferative activity and cellular internalization

OpenAIRE

Hwang, Hyun Sook; Kim, Dong Won; Kim, Soung Soo

2006-01-01

The human prothrombin kringle-2 protein inhibits angiogenesis and LLC (Lewis lung carcinoma) growth and metastasis in mice. Additionally, the NSA9 peptide (NSAVQLVEN) derived from human prothrombin kringle-2 has been reported to inhibit the proliferation of BCE (bovine capillary endothelial) cells and CAM (chorioallantoic membrane) angiogenesis. In the present study, we examined the structure–activity relationships of the NSA9 peptide in inhibiting the proliferation of endothelial cells lines...

Effects of deposition temperature and in-situ annealing time on structure and magnetic properties of (001) orientation FePt films

International Nuclear Information System (INIS)

Yu, Yongsheng; George, T.A.; Li, Haibo; Sun, Daqian; Ren, Zhenan; Sellmyer, D.J.

2013-01-01

FePt films were prepared on (100) oriented single crystal MgO substrates at high temperature ranging from 620 until 800 °C and in-situ annealed for different times ranging from 0 to 60 min to obtain ordered FePt films. The structural analysis indicates that FePt films grow epitaxially on MgO (100) substrates. Both increasing deposition temperature and in-situ annealing time enhance the (001) texture and ordering of FePt films. The magnetic analysis shows that these L1 0 FePt films have perpendicular anisotropy and the easy magnetization c-axis is perpendicular to the film plane. Magnetization reversal is controlled by a rotational mechanism. The hard magnetic properties of the films are improved with increasing deposition temperature or in-situ annealing time. - Highlights: ► The paper reports the texture and magnetic evolution of FePt films deposited on MgO substrates. ► Increasing deposition temperature or annealing time enhanced the texture and ordering. ► The magnetic analysis shows L1 0 FePt films have perpendicular anisotropy.

Use of Prothrombin Complex Concentrate in Patients during Heart Transplantation after Implantation of a Left Ventricular Mechanical Support System

Directory of Open Access Journals (Sweden)

V. V. Lomivorotov

2012-01-01

Full Text Available Heart transplantation in patients after implantation of mechanical cardiac support devices entails an extremely high risk for perioperative bleeding. Recombinant activated coagulation factor VII is presently used to reduce the volume of bleeding in this patient group. There are parallel data on its administration-induced thromboembolic events in the literature. This paper describes a case of using a prothrombin complex concentrate in a patient during explantation of a left ventricular bypass system and subsequent orthotopic heart transplantation in the presence of significant hypocoagulation. At the end of a surgery, 1200 IU of the agent was used at a remaining bleeding rate of more than 1000 ml/hour. Within the first 24 hours after surgery, the rate of discharge drainage was less than 100 ml/hour. A control plain chest X-ray study revealed massive left-sided hydrothorax on day 2 postsurgery. The left pleural cavity was revised under thoracoscopic guidance and 1000 ml of blood clots were evacuated. Although the administration of prothrombin complex concentrate did not guard against re-intervention, its use seems a promising strategy in life-threatening bleedings in patients after explantation of mechanical cardiac support devices. Further multicenter investigations are required to determine the efficacy and safety of prothrom-bin complex concentration in cardiac surgery. Key words: Recombinant activated coagulation factor VII, prothrombin complex concentration, mechanical cardiac support device, orthotopic heart transplantation.

The Frequency of Factor V Leiden, Prothrombin G20210A and Methylenetetrahydrofolate Reductase C677T Mutations in Migraine Patients

Directory of Open Access Journals (Sweden)

Ruhsen Öcal

2010-12-01

Full Text Available OBJECTIVE: Migraine is an independent risk factor for ischemic stroke, but its pathophysiology is still unclear. Genetic factors that predispose patients to thrombosis have been studied in patients with migraine to highlight the pathogenesis, but the results remain controversial. In this study, the frequencies of factor V Leiden (FVL, prothrombin (Pt G20210A and methylenetetrahydrofolate reductase (MTHFR C677T mutations were investigated. METHODS: One hundred and sixty patients aged of 15 to 55 years with no history of systemic disease and who had been diagnosed as migraine according to the International Headache Society (IHS diagnostic criteria at Baskent University Hospital Neurology Outpatient Clinics were investigated for FVL, Pt G20210A and MTHFR C677T mutations from their genomic DNA, and the results were compared with those of healthy controls. RESULTS: One hundred and fifty five (96.9% of 160 migraine patients were homozygote normal, 5 (3.1% were heterozygote and none of them were homozygote mutant for FVL. The control group had 9.8% heterozygote individuals but the difference between the percentages was not statistically significant (p> 0.05. There were no homozygote mutant individuals in the Turkish population study in normal subjects like our study. Thirty nine (24.4% of 160 migraine patients were heterozygote and 8 (5% were homozygote mutant for MTHFR C677T. The control group had 37 (34.9% heterozygote and 6 (5.6% homozygote mutant individuals. The difference between the percentages was not statistically significant (p= 0.15. Three (1.9% of 160 migraine patients were heterozygote and 5 (2.9% of the control group were heterozygote mutant for Pt G20210A mutation. The control group had 37 (34.9% heterozygote and 6 (5.6% homozygote mutant individuals. The difference between the percentages was not statistically significant (p= 0.420. CONCLUSION: Our study indicates that FVL, Pt G20210A and MTHFR C677T gene mutations, which are considered

The Frequency of Factor V Leiden, Prothrombin G20210A and Methylenetetrahydrofolate Reductase C677T Mutations in Migraine Patients

Directory of Open Access Journals (Sweden)

Ruhsen Öcal

2010-12-01

Full Text Available OBJECTIVE: Migraine is an independent risk factor for ischemic stroke, but its pathophysiology is still unclear. Genetic factors that predispose patients to thrombosis have been studied in patients with migraine to highlight the pathogenesis, but the results remain controversial. In this study, the frequencies of factor V Leiden (FVL, prothrombin (Pt G20210A and methylenetetrahydrofolate reductase (MTHFR C677T mutations were investigated. METHODS: One hundred and sixty patients aged of 15 to 55 years with no history of systemic disease and who had been diagnosed as migraine according to the International Headache Society (IHS diagnostic criteria at Baskent University Hospital Neurology Outpatient Clinics were investigated for FVL, Pt G20210A and MTHFR C677T mutations from their genomic DNA, and the results were compared with those of healthy controls. RESULTS: One hundred and fifty five (96.9% of 160 migraine patients were homozygote normal, 5 (3.1% were heterozygote and none of them were homozygote mutant for FVL. The control group had 9.8% heterozygote individuals but the difference between the percentages was not statistically significant (p> 0.05. There were no homozygote mutant individuals in the Turkish population study in normal subjects like our study. Thirty nine (24.4% of 160 migraine patients were heterozygote and 8 (5% were homozygote mutant for MTHFR C677T. The control group had 37 (34.9% heterozygote and 6 (5.6% homozygote mutant individuals. The difference between the percentages was not statistically significant (p= 0.15. Three (1.9% of 160 migraine patients were heterozygote and 5 (2.9% of the control group were heterozygote mutant for Pt G20210A mutation. The control group had 37 (34.9% heterozygote and 6 (5.6% homozygote mutant individuals. The difference between the percentages was not statistically significant (p= 0.420. CONCLUSION: Our study indicates that FVL, Pt G20210A and MTHFR C677T gene mutations, which are considered

Elevated prothrombin time/international normalized ratio associated with concurrent administration of regorafenib and warfarin in a patient with advanced colorectal cancer.

Science.gov (United States)

Kitade, Hironori; Hiromasa-Yamasaki, Azusa; Hokkoku, Kengo; Mori, Mitsue; Watanabe, Michio; Nakai, Masuo; Yano, Seiji

2016-01-01

Regorafenib and its metabolites may inhibit the activities of several CYP or UDP-glucuronosyltransferase isoforms, including that of CYP2C9. Therefore, pharmacological agents that are CYP2C9 substrates may show elevated circulating levels and enhanced drug efficacy when concurrently used with regorafenib. Previous studies showed that the area under the plasma concentration-time curve of warfarin, which is the substrate for CYP2C9, increased upon co-administration of regorafenib. However, there are no reports indicating that the anticoagulant effects of warfarin increased upon co-administration of regorafenib. We report a case of a 76-year-old man with liver metastasis of colon cancer. He was treated with regorafenib at a dosage of 120 mg daily on days 1 to 21 every 4 weeks as a third-line therapy. He had a history of acute myocardial infarction and had taken 2 mg warfarin daily. Three weeks after the treatment began, PT/INR values markedly increased, although there was no hemorrhage. Administration of regorafenib and warfarin was discontinued, and then PT/INR rapidly decreased. Warfarin administration was restarted (0.5 mg daily) and the dose was increased up to 1.5 mg daily. The patient's PT/INR values exhibited a tendency to increase when concurrently used with regorafenib, the dose of which was reduced to 80 mg daily on days 1 to 14 every 3 weeks at a physician's discretion. The clinical course of this patient suggested that PT/INR might increase during concurrent use of warfarin and regorafenib. Therefore, PT/INR should be periodically monitored during the concurrent use of warfarin and regorafenib.

Mesoporous Pt and Pt/Ru alloy electrocatalysts for methanol oxidation

Energy Technology Data Exchange (ETDEWEB)

Franceschini, Esteban A. [Grupo de Celdas de Combustible, Departamento de Fisica de la Materia Condensada, Centro Atomico Constituyentes, CNEA. Av. General Paz 1499 (1650), San Martin, Buenos Aires (Argentina); Planes, Gabriel A. [Departamento de Quimica, Facultad de Ciencias Exactas, Fisicoquimicas y Naturales, Universidad Nacional de Rio Cuarto, Agencia Postal No 3, 5800, Rio Cuarto (Argentina); Williams, Federico J. [Departamento de Quimica Inorganica, Analitica y Quimica-Fisica, INQUIMAE CONICET, Facultad Ciencias Exactas y Naturales, Pabellon 2, Ciudad Universitaria, Buenos Aires (Argentina); Soler-Illia, Galo J.A.A. [Gerencia de Quimica, Centro Atomico Constituyentes, CNEA. Av. General Paz 1499 (1650), San Martin, Buenos Aires (Argentina); Corti, Horacio R. [Grupo de Celdas de Combustible, Departamento de Fisica de la Materia Condensada, Centro Atomico Constituyentes, CNEA. Av. General Paz 1499 (1650), San Martin, Buenos Aires (Argentina); Departamento de Quimica Inorganica, Analitica y Quimica-Fisica, INQUIMAE CONICET, Facultad Ciencias Exactas y Naturales, Pabellon 2, Ciudad Universitaria, Buenos Aires (Argentina)

2011-02-15

Mesoporous Pt and Pt/Ru catalysts with 2D-hexagonal mesostructure were synthesized using a triblock poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) copolymer (Pluronic F127 {sup registered}) template, on a gold support. Large electrochemical surface areas were observed for the catalysts prepared at high overpotentials. Compared to the Pt catalyst, the Pt/Ru alloy containing 3 at% of Ru exhibited lower onset potential and more than three times the limit mass activity for methanol oxidation. This behavior is assigned to the larger pore size of the mesoporous Pt and Pt/Ru catalysts obtained with this template that seems to improve the methanol accessibility to the active sites compared to those obtained using lyotropic liquid crystals. (author)

Prothrombin G20210A gene mutation in pregnant females with thrombotic obstetric complications

International Nuclear Information System (INIS)

Alam, M.A.; Ali, N.; Ayyub, M.

2018-01-01

To determine the frequency of prothrombin G20210A gene mutation in pregnant females with adverse thrombotic obstetric complication and to compare it with prothrombin G20210A gene's frequency in control population. Study Design: Case control study. Place and Duration of Study: Department of Haematology, Army Medical College Rawalpindi and Military Hospital Rawalpindi, from Nov 2013 to Oct 2014. Material and Methods: Sixty pregnant females were included in the study; 30 were cases with adverse thrombotic obstetric complication, while 30 were controls. Detailed history was obtained and 3 ml blood in EDTA tube was collected. DNA was extracted from whole blood and through RT-PCR, presence of prothrombin G20210A gene mutation was looked for in patients and controls. Data was analyzed using SPSS 21. Results: A total of 60 women-30 cases with thrombotic obstetric complications as 'cases' and 30 as 'controls'- were included in the study. Mean age of 'cases' was 28.70 +- 4.23 years while that of 'controls' was 27.33 +- 4.49 years. There was no statistically significant difference among the two groups (p=0.54). In case group only one of 30 (3.3%) patients had heterozygous F2 G20210A mutation while 29 (96.7%) patients had wild type allele. In control group, all the 30 (100%) subjects had wild type allele. The odds of finding the mutation in cases was 1:29 i.e. 0.03 as compared to zero in the control group. The difference was statistically insignificant (p=0.5). Conclusion: Our study shows that the frequency of F2 G20210A gene mutation in pregnant females having adverse thrombotic obstetric complications was not significantly different from its frequency in control population. (author)

Nucleation size of hcp-CoPt dot arrays characterized by time dependence of coercivity

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, N; Kitakami, O [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai, 980-8577 (Japan); Mitsuzuka, K; Shimatsu, T; Aoi, H, E-mail: kikuchin@tagen.tohoku.ac.j [Research Institute of Electrical Communication, Tohoku University, Sendai, 980-8577 (Japan)

2010-01-01

The magnetization reversal process for dot arrays is likely to start from a nucleation followed by propagation process. In this study, we estimated the nucleation diameter D{sub n} for dot arrays made from thin hcp-CoPt perpendicular films (thickness {delta}=3 nm) and Co/Pt multilayered films ({delta}=9 nm), respectively. The dot diameter, D, was varied from 30 to 200 nm for CoPt dot arrays, and from 40 to 80 nm for Co/Pt dot arrays. The remanence coercivity was measured at measurement times t' = 10{sup 3} s and 10{sup -5} s (pulse field), and defined as H{sub r} and H{sub r}{sup P}. The energy barrier {Delta}E was evaluated by fitting H{sub r} and H{sub r}{sup P} to Sharrock's equation. The value of D{sub n} was estimated from {Delta}E, {delta} and the effective magnetic anisotropy of dot arrays including the demagnetizing energy due to the dot shape K{sub u}{sup eff}. D{sub n} was independent of Din both series of dot arrays, and about 17 nm for CoPt dot arrays and about 11 nm for Co/Pt dot arrays. These values were close to both the grain size and the exchange length of these films.

Implementation of a microcontroller-based semi-automatic coagulator.

Science.gov (United States)

Chan, K; Kirumira, A; Elkateeb, A

2001-01-01

The coagulator is an instrument used in hospitals to detect clot formation as a function of time. Generally, these coagulators are very expensive and therefore not affordable by a doctors' office and small clinics. The objective of this project is to design and implement a low cost semi-automatic coagulator (SAC) prototype. The SAC is capable of assaying up to 12 samples and can perform the following tests: prothrombin time (PT), activated partial thromboplastin time (APTT), and PT/APTT combination. The prototype has been tested successfully.

Real-Time Optical Monitoring of Pt Catalyst Under the Potentiodynamic Conditions

Science.gov (United States)

Song, Hyeon Don; Lee, Minzae; Kim, Gil-Pyo; Choi, Inhee; Yi, Jongheop

2016-12-01

In situ monitoring of electrode materials reveals detailed physicochemical transition in electrochemical device. The key challenge is to explore the localized features of electrode surfaces, since the performance of an electrochemical device is determined by the summation of local architecture of the electrode material. Adaptive in situ techniques have been developed for numerous investigations; however, they require restricted measurement environments and provide limited information, which has impeded their widespread application. In this study, we realised an optics-based electrochemical in situ monitoring system by combining a dark-field micro/spectroscopy with an electrochemical workstation to investigate the physicochemical behaviours of Pt catalyst. We found that the localized plasmonic trait of a Pt-decorated Au nanoparticle as a model system varied in terms of its intensity and wavelength during the iterations of a cyclic voltammetry test. Furthermore, we show that morphological and compositional changes of the Pt catalyst can be traced in real time using changes in quantified plasmonic characteristics, which is a distinct advantage over the conventional electrochemistry-based in situ monitoring systems. These results indicate the substantial promise of online operando observation in a wide range of electrical energy conversion systems and electrochemical sensing areas.

Antiprothrombin Antibodies

Directory of Open Access Journals (Sweden)

Polona Žigon

2015-05-01

Full Text Available In patients with the antiphospholipid syndrome (APS, the presence of a group of pathogenic autoantibodies called antiphospholipid antibodies causes thrombosis and pregnancy complications. The most frequent antigenic target of antiphospholipid antibodies are phospholipid bound β2-glycoprotein 1 (β2GPI and prothrombin. The international classification criteria for APS connect the occurrence of thrombosis and/or obstetric complications together with the persistence of lupus anticoagulant, anti-cardiolipin antibodies (aCL and antibodies against β2GPI (anti-β2GPI into APS. Current trends for the diagnostic evaluation of APS patients propose determination of multiple antiphospholipid antibodies, among them also anti-prothrombin antibodies, to gain a common score which estimates the risk for thrombosis in APS patients. Antiprothrombin antibodies are common in APS patients and are sometimes the only antiphospholipid antibodies being elevated. Methods for their determination differ and have not yet been standardized. Many novel studies confirmed method using phosphatidylserine/prothrombin (aPS/PT ELISA as an antigen on solid phase encompass higher diagnostic accuracy compared to method using prothrombin alone (aPT ELISA. Our research group developed an in-house aPS/PT ELISA with increased analytical sensitivity which enables the determination of all clinically relevant antiprothrombin antibodies. aPS/PT exhibited the highest percentage of lupus anticoagulant activity compared to aCL and anti-β2GPI. aPS/PT antibodies measured with the in-house method associated with venous thrombosis and presented the strongest independent risk factor for the presence of obstetric complications among all tested antiphospholipid antibodies. 

Effect of anticoagulant administration on blood clotting and some hormones related to rat-fertility

International Nuclear Information System (INIS)

Abdel-Khalek, L.G.

2009-01-01

This study was performed using 30 mature male albino rats divided into 3 equal groups; control and two treated groups to assess the effect of anticoagulant (warfarin) administration on the level of some hormones related to fertility. The two treated groups were injected intraperitoneally every other day with 1 ml (0.03 mg)and 2 ml (0.06 mg)warfarin/ 100 g body weight respectively where, two specimens were taken from each group after two and four weeks. Clotting time (CT), prothrombin time (PT), partial prothrombin time (PTT) platelets count, fasting blood sugar (F.B.S), calcium levels in addition to triiodothyronine (T 3 ), thyroxin (T 4 ), insulin, corticosterone, and testosterone hormones were determined. The results showed that the intraperitoneal injection of warfarin caused significant increase in clotting time, prothrombin time , partial prothrombin time, platelets count and glucose level, while serum calcium level showed significant decrease. Intraperitoneal injection of warfarin caused significant decrease of insulin and significant increase of corticosterone, T 3 showed significant decrease in high dose group while T 4 showed significant decrease in small dose group. The high dose was associated with the highest level of testosterone hormone. these results denoted that warfarin anticoagulant had no negative effect on gonadal sex hormone and hence on male fertility

The effect of tobacco snuff on blood coagulation parameters in adult ...

African Journals Online (AJOL)

This study evaluates the effect of tobacco snuff on platelet count, prothrombin time (PT), and partial thromboplastin time (aPTT) in adult Wistar rats weighing between 150-300g and divided into four group (A - D; n=12 each). Group A served as control, while B, C and D served as test groups. The test groups were further ...

[Recurrent vascular access trombosis associated with the prothrombin mutation G20210A in a adult patient in haemodialysis].

Science.gov (United States)

Quintana, L F; Coll, E; Monteagudo, I; Collado, S; López-Pedret, J; Cases, A

2005-01-01

Vascular access-related complications are a frequent cause of morbidity in haemodialysis patients and generate high costs. We present the case of an adult patient with end-stage renal disease and recurrent vascular access thrombosis associated with the prothrombin mutation G20210A and renal graft intolerance. The clinical expression of this heterozygous gene mutation may have been favoured by inflammatory state, frequent in dialysis patients. In this patient, the inflammatory response associated with the renal graft intolerance would have favored the development of recurrent vascular access thrombosis in a adult heterozygous for prothrombin mutation G20210A. In the case of early dysfunction of haemodialysis vascular access and after ruling out technical problems, it is convenient to carry out a screening for thrombophilia.

The role of the glutathione S-transferase genes GSTT1, GSTM1, and GSTP1 in acetaminophen-poisoned patients

DEFF Research Database (Denmark)

Buchard, Anders; Eefsen, Martin; Semb, Synne

2012-01-01

The aim of this study was to assess if genetic variants in the glutathione-S-transferase genes GST-T1, M1, and P1 reflect risk factors in acetaminophen (APAP)-poisoned patients assessed by investigation of the relation to prothrombin time (PT), which is a sensitive marker of survival in these pat...

Dabigatran and its reversal with recombinant factor VIIa and prothrombin complex concentrate

DEFF Research Database (Denmark)

Sølbeck, Sacha; Nilsson, Caroline U; Engström, Martin

2014-01-01

OBJECTIVE: Dabigatran is a new oral direct thrombin inhibitor. No specific antidote exists in the event of hemorrhage, but prothrombin complex concentrate (PCC) and recombinant activated factor VII (rFVIIa) are suggested therapies. Sonoclot is a bedside viscoelastic instrument for monitoring...... different Sonoclot cuvettes: Glassbead, kaolin and tissue factor (diluted) activated. RESULTS: The Sonoclot detected in vitro-induced anticoagulation due to dabigatran with the glassbead- and kaolin-activated cuvettes. There was no reversing effect of PCC, probably due to the presence of heparin in the PCC...

ANALISIS PENERAPAN JUST IN TIME DALAM MENINGKATKAN EFISIENSI PRODUKSI PADA PT. CIPTA BETON SINAR PERKASA DI MAKASSAR

OpenAIRE

MUSLIMIN, EDWIN

2012-01-01

Tujuan dari penelitian ini adalah untuk melihat bagaimana penerapan Just in Time dalam produksi campuran beton pada PT. Cipta Beton Sinar Perkasa di Makassardan untuk mengetahui throughput time yang diperoleh dengan penerapan Just in Time.

Renal function and plasma dabigatran level measured at trough by diluted thrombin time assay

Directory of Open Access Journals (Sweden)

Marta E. Martinuzzo

2017-02-01

Full Text Available Dabigatran etexilate (direct thrombin inhibitor is effective in preventing embolic stroke in patients with atrial fibrillation. It does not require laboratory control, but given the high renal elimination, its measurement in plasma is important in renal failure. The objectives of the study were to verify the analytical quality of the diluted thrombin time assay for measurement of dabigatran plasma concentration (cc, correlate cc with classic coagulation assays, prothrombin time (PT and activated partial thromboplastin time (APTT, and evaluate them according to the creatinine clearance (CLCr. Forty plasma samples of patients (34 consecutive and 6 suspected of drug accumulation receiving dabigatran at 150 (n = 19 or 110 (n = 21 mg/12 hours were collected. Blood samples were drawn at 10-14 hours of the last intake. Dabigatran concentration was determined by diluted thrombin time (HemosIl DTI, Instrumentation Laboratory (IL. PT and APTT (IL were performed on two fotooptical coagulometers, ACL TOP 300 and 500 (IL. DTI presented intra-assay coefficient of variation < 5.4% and inter-assay < 6%, linearity range 0-493 ng/ml. Patients' cc: median 83 (4-945 ng/ml. Individuals with CLCr in the lowest tertile (22.6-46.1 ml/min showed significantly higher median cc: 308 (49-945, compared to the average 72 (12-190 and highest tertile, 60 (4-118 ng/ml. Correlation between cc and APTT or PT were moderate, r2 = 0.59 and -0.66, p < 0.0001, respectively. DTI test allowed us to quantify plasma dabigatran levels, both in patients with normal or altered renal function, representing a useful tool in clinical situations such as renal failure, pre surgery or emergencies

Surface coverage of Pt atoms on PtCo nanoparticles and catalytic kinetics for oxygen reduction

Energy Technology Data Exchange (ETDEWEB)

Jiang Rongzhong, E-mail: rongzhong.jiang@us.army.mi [Sensors and Electron Devices Directorate, U.S. Army Research Laboratory, 2800 Powder Mill Road, Adelphi, MD 20783-1197 (United States); Rong, Charles; Chu, Deryn [Sensors and Electron Devices Directorate, U.S. Army Research Laboratory, 2800 Powder Mill Road, Adelphi, MD 20783-1197 (United States)

2011-02-01

The surface coverage of Pt atoms on PtCo nanoparticles and its effect on catalytic kinetics for oxygen reduction were investigated. The PtCo nanoparticles with different surface coverage of Pt atoms were synthesized with various methods, including normal chemical method, microemulsion synthesis, and ultrasound-assisted microemulsion. A model of Pt atoms filling into a spherical nanoparticle was proposed to explain the relationship of surface metal atoms and nanoparticle size. The catalytic activity of the PtCo nano-particles is highly dependent on the synthetic methods, even if they have the same chemical composition. The PtCo nano-particles synthesized with ultrasound-assisted microemulsion showed the highest activity, which is attributed to an increase of active surface coverage of Pt atoms on the metal nanoparticles. The rate of oxygen reduction at 0.5 V (vs. SCE) catalyzed by the PtCo synthesized with ultrasound-assisted micro-emulsion was about four times higher than that of the PtCo synthesized with normal chemical method. As demonstrated with rotating-ring disk electrode measurement, the PtCo nano-particles can catalyze oxygen 4-electron reduction to water without intermediate H{sub 2}O{sub 2} detected.

Pt skin coated hollow Ag-Pt bimetallic nanoparticles with high catalytic activity for oxygen reduction reaction

Science.gov (United States)

Fu, Tao; Huang, Jianxing; Lai, Shaobo; Zhang, Size; Fang, Jun; Zhao, Jinbao

2017-10-01

The catalytic activity and stability of electrocatalyst is critical for the commercialization of fuel cells, and recent reports reveal the great potential of the hollow structures with Pt skin coat for developing high-powered electrocatalysts due to their highly efficient utilization of the Pt atoms. Here, we provide a novel strategy to prepare the Pt skin coated hollow Ag-Pt structure (Ag-Pt@Pt) of ∼8 nm size at room temperature. As loaded on the graphene, the Ag-Pt@Pt exhibits a remarkable mass activity of 0.864 A/mgPt (at 0.9 V, vs. reversible hydrogen electrode (RHE)) towards oxygen reduction reaction (ORR), which is 5.30 times of the commercial Pt/C catalyst, and the Ag-Pt@Pt also shows a better stability during the ORR catalytic process. The mechanism of this significant enhancement can be attributed to the higher Pt utilization and the unique Pt on Ag-Pt surface structure, which is confirmed by the density functional theory (DFT) calculations and other characterization methods. In conclusion, this original work offers a low-cost and environment-friendly method to prepare a high active electrocatalyst with cheaper price, and this work also discloses the correlation between surface structures and ORR catalytic activity for the hollow structures with Pt skin coat, which can be instructive for designing novel advanced electrocatalysts for fuel cells.

Pt, Co–Pt and Fe–Pt alloy nanoclusters encapsulated in virus capsids

International Nuclear Information System (INIS)

Okuda, M; Eloi, J-C; Jones, S E Ward; Schwarzacher, W; Verwegen, M; Cornelissen, J J L M

2016-01-01

Nanostructured Pt-based alloys show great promise, not only for catalysis but also in medical and magnetic applications. To extend the properties of this class of materials, we have developed a means of synthesizing Pt and Pt-based alloy nanoclusters in the capsid of a virus. Pure Pt and Pt-alloy nanoclusters are formed through the chemical reduction of [PtCl 4 ] − by NaBH 4 with/without additional metal ions (Co or Fe). The opening and closing of the ion channels in the virus capsid were controlled by changing the pH and ionic strength of the solution. The size of the nanoclusters is limited to 18 nm by the internal diameter of the capsid. Their magnetic properties suggest potential applications in hyperthermia for the Co–Pt and Fe–Pt magnetic alloy nanoclusters. This study introduces a new way to fabricate size-restricted nanoclusters using virus capsid. (paper)

Characterization of azo dyes on Pt and Pt/polyaniline/dispersed Pt electrodes

Energy Technology Data Exchange (ETDEWEB)

Molina, J.; Fernandez, J.; Rio, A.I. del; Bonastre, J. [Departamento de Ingenieria Textil y Papelera, EPS de Alcoy, Universitat Politecnica de Valencia, Plaza Ferrandiz y Carbonell s/n, 03801 Alcoy (Spain); Cases, F., E-mail: fjcases@txp.upv.es [Departamento de Ingenieria Textil y Papelera, EPS de Alcoy, Universitat Politecnica de Valencia, Plaza Ferrandiz y Carbonell s/n, 03801 Alcoy (Spain)

2012-06-15

The electrochemical characterization of two organic dyes (amaranth and procion orange MX-2R) has been performed on Pt electrodes and Pt electrodes coated with polyaniline and dispersed Pt. Electrodes with different Pt loads have been synthesized and characterized obtaining that a load of 300 {mu}g cm{sup -2} was the optimum one. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) was employed to observe the distribution and morphology of the Pt nanoparticles. The electroactivity of the electrodes has also been characterized by means of scanning electrochemical microscopy (SECM). The chemical characterization of Pt dispersed Pani coated Pt electrodes (Pt-Pani-Pt) was performed by means of X-ray photoelectron spectroscopy (XPS). The electrochemical characterization of the dyes has been performed by means of cyclic voltammetry. Voltammograms have shown that the presence of the dyes diminishes characteristic Pt oxidation and reduction peaks. However, redox processes due to the dyes, appeared in the voltammograms. The different species responsible of these redox processes were generated in the vicinity of the electrode and were not adsorbed on the electrode surface since after stirring, the different redox processes disappeared. Characterization with different scan rates showed that redox processes of both dyes were controlled by diffusion.

Efficient decomposition of formaldehyde at room temperature over Pt/honeycomb ceramics with ultra-low Pt content.

Science.gov (United States)

Nie, Longhui; Zheng, Yingqiu; Yu, Jiaguo

2014-09-14

Pt/honeycomb ceramic (Pt/HC) catalysts with ultra-low Pt content (0.005-0.055 wt%) were for the first time prepared by an impregnation of honeycomb ceramics with Pt precursor and NaBH4-reduction combined method. The microstructures, morphologies and textural properties of the resulting samples were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The obtained Pt/HC catalysts were used for catalytic oxidative decomposition of formaldehyde (HCHO) at room temperature. It was found that the as-prepared Pt/HC catalysts can efficiently decompose HCHO in air into CO2 and H2O at room temperature. The catalytic activity of the Pt/HC catalysts increases with increasing the Pt loading in the range of 0.005-0.013 wt%, and the further increase of the Pt loading does not obviously improve catalytic activity. From the viewpoint of cost and catalytic performance, 0.013 wt% Pt loading is the optimal Pt loading amount, and the Pt/HC catalyst with 0.013 wt% Pt loading also exhibited good catalytic stability. Considering practical applications, this work will provide new insights into the low-cost and large-scale fabrication of advanced catalytic materials for indoor air purification.

More efficient reversal of dabigatran inhibition of coagulation by activated prothrombin complex concentrate or recombinant factor VIIa than by four-factor prothrombin complex concentrate.

Science.gov (United States)

Lindahl, Tomas L; Wallstedt, Maria; Gustafsson, Kerstin M; Persson, Egon; Hillarp, Andreas

2015-03-01

The number of patients on antithrombotic treatment due to atrial fibrillation and venous thromboembolism is increasing fast due to an aging population. A growing proportion will be treated with novel oral anticoagulants, the first in clinical use was the direct oral thrombin inhibitor dabigatran (Pradaxa®). A small percentage of the patients on dabigatran will experience serious bleeding or be in need of urgent surgery. The aim of this study was to test the effects of different hemostatic agents in potentially reversing the anticoagulant effects in vitro in blood or platelet-rich plasma (PRP) spiked with dabigatran. Whole blood or PRP was spiked with the active substance dabigatran, 200 μg/L. We measured clotting time being induced by 1.4 pmol/L tissue factor using the instrument ReoRox2™ and initial clot growth velocity from a tissue factor covered surface using the instrument Thrombodynamics Analyzer T-2™. Dabigatran prolonged clotting time 5-fold but reduced clot growth velocity only slightly. The reversing effects of prothrombin complex concentrates (PCC), activated PCC (APCC) and recombinant activated factor VII (rFVIIa) were then tested. APCC (1.8 U/mL) reduced the prolonged clotting time by 1/3, rFVIIa (2 μg/L) only slightly (n = 10-20). The reduction was not significant using Mann-Whitney test but significant using t-test with Bonferronis' correction for multiple comparisons, whereas PCC (0.56 U/mL) had no effect on clotting time. APCC doubled initial clot growth velocity, although even more in the absence of dabigatran. In conclusion, APCC and rFVIIa, but not PCC, seem to reverse, at least partially, some effects of dabigatran on coagulation parameters. Systematic evaluation of case reports, registries and, ultimately, randomized clinical trials are needed to elucidate potential benefit for patients. Copyright © 2014 Elsevier Ltd. All rights reserved.

Real-time monitoring of luminescent lifetime changes of PtOEP oxygen sensing film with LED/photodiode-based time-domain lifetime device.

Science.gov (United States)

Ji, Shaomin; Wu, Wanhua; Wu, Yubo; Zhao, Taiyang; Zhou, Fuke; Yang, Yubin; Zhang, Xin; Liang, Xiaofen; Wu, Wenting; Chi, Lina; Wang, Zhonggang; Zhao, Jianzhang

2009-05-01

A cost-effective LED/photodiode(PD)-based time-domain luminescent lifetime measuring device with rugged electronics and simplified algorithms was assembled and successfully used to characterize oxygen sensing films, by continuously monitoring phosphorescence lifetime changes of phosphorescent platinum octaethylporphyrin (PtOEP) in cardo poly(aryl ether ketone) polymer (IMPEK-C) vs. variation of the oxygen partial pressure in a gas mixture (O(2)/N(2)). The results determined by both phosphorescence lifetime and intensity monitoring were compared and the lifetime mode gave results which are in good agreement with the intensity mode. The lifetime-based linear Stern-Volmer plot indicates that the PtOEP molecules are nearly homogeneously distributed in the sensing film. The phosphorescent lifetime of the PtOEP film changes from 75 micros in neat N(2) to less than 2 micros in neat O(2). The sensing system (by combination of the PtOEP sensing film with the home-assembled lifetime device) gives a high lifetime-based O(2) sensing resolution, e.g. about 2 micros Torr(-1) for low O(2) concentration (below 3.5% O(2), V/V). This feasible lifetime device configuration is affordable to most sensor laboratories and the device may facilitate the study of O(2) sensing material with the continuous lifetime monitoring method.

The electrocatalytic properties of carbon supported PtRu/C nanoalloys in oxidation of small organic molecules: Comparison with Pt/C catalyst

Directory of Open Access Journals (Sweden)

Lović Jelena D.

2012-01-01

Full Text Available The electrocatalytic activity of carbon supported PtRu/C catalysts, with different composition, toward the electrooxidation of methanol, CO and formic acid were examined in acid and alkaline solution at ambient temperature using thin-film rotating disk electrode (RDE method and compared with activity of Pt/C. The catalysts were characterized by XRD, AFM and STM techniques. XRD pattern revealed that PtRu-1/C catalyst is consisted of two structures e.g. Pt-Ru-fcc and Ru-hcp (the solid solution of Ru in Pt and the small amount of Ru or solid solution of Pt in Ru, as opposed to PtRu-2/C catalyst which is consisted of one structure mostly, Pt-Ru-fcc. According to STM images, PtRu as well as Pt, particles size were between 2 and 6 nm, which is in a good agreement with the mean particles size determined by XRD. To establish the activity and stability of the catalysts potentiodynamic and quasi steady-state measurements were performed. It was found that the activity of Pt and PtRu for CO and methanol oxidation is a strong function of pH of solution. The kinetics are much higher in alkaline than in acid solution and the difference between Pt/C and PtRu/C is much less pronounced in alkaline media. Results presented in this work indicate that activity of PtRu catalysts depends on catalyst composition, e.g. on Pt/Ru atomic ratio, as well as on alloying degree of catalysts. Comparison of CO, methanol and formic acid oxidation on PtRu-2/C, PtRu-1/C and Pt/C catalysts revealed that PtRu-2/C is the most active one. It was shown that the PtRu-2/C catalyst, due to fact that it is consisted of only one phase, with high alloying degree, through the bifunctional mechanism improved by electronic effect, achieve the activity two times higher related to PtRu-1/C in the oxidation of all organic molecules investigated, and about three times higher compared to Pt/C in the oxidation of methanol and CO, and five times higher in formic acid oxidation.

Determination of the apparent transfer coefficient for CO oxidation on Pt(poly), Pt(111), Pt(665) and Pt(332) using a potential modulation technique.

Science.gov (United States)

Wang, Han-Chun; Ernst, Siegfried; Baltruschat, Helmut

2010-03-07

The apparent transfer coefficient, which gives the magnitude of the potential dependence of the electrochemical reaction rates, is the key quantity for the elucidation of electrochemical reaction mechanisms. We introduce the application of an ac method to determine the apparent transfer coefficient alpha' for the oxidation of pre-adsorbed CO at polycrystalline and single-crystalline Pt electrodes in sulfuric acid. The method allows to record alpha' quasi continuously as a function of potential (and time) in cyclic voltammetry or at a fixed potential, with the reaction rate varying with time. At all surfaces (Pt(poly), Pt(111), Pt(665), and Pt(332)) we clearly observed a transition of the apparent transfer coefficient from values around 1.5 at low potentials to values around 0.5 at higher potentials. Changes of the apparent transfer coefficients for the CO oxidation with potential were observed previously, but only from around 0.7 to values as low as 0.2. In contrast, our experimental findings completely agree with the simulation by Koper et al., J. Chem. Phys., 1998, 109, 6051-6062. They can be understood in the framework of a Langmuir-Hinshelwood mechanism. The transition occurs when the sum of the rate constants for the forward reaction (first step: potential dependent OH adsorption, second step: potential dependent oxidation of CO(ad) with OH(ad)) exceeds the rate constant for the back-reaction of the first step. We expect that the ac method for the determination of the apparent transfer coefficient, which we used here, will be of great help also in many other cases, especially under steady conditions, where the major limitations of the method are avoided.

Prothrombin fragment 1+2 in urine as an indicator of sustained coagulation activation after total hip arthroplasty

DEFF Research Database (Denmark)

Borris, L.C.; Breindahl, M.; Ryge, C.

2007-01-01

Purpose: Prothrombin fragment 1 + 2 measured in spot urine (uF1 + 2) is an indicator of thrombin generation. We examined whether measured levels of uF1 + 2 can be used to differentiate between patients who do and do not acquire sustained coagulation activation after total hip arthroplasty (THA...

Measurement of benzenethiol adsorption to nanostructured Pt, Pd, and PtPd films using Raman spectroelectrochemistry.

Science.gov (United States)

Pomfret, Michael B; Pietron, Jeremy J; Owrutsky, Jeffrey C

2010-05-04

Raman spectroscopy and electrochemical methods were used to study the behavior of the model adsorbate benzenethiol (BT) on nanostructured Pt, Pd, and PtPd electrodes as a function of applied potential. Benzenethiol adsorbs out of ethanolic solutions as the corresponding thiolate, and voltammetric stripping data reveal that BT is oxidatively removed from all of the nanostructured metals upon repeated oxidative and reductive cycling. Oxidative stripping potentials for BT increase in the order Pt oxidizing potentials via cleavage of the Pt-S bond. In contrast, on nanoscale Pd and PtPd, BT is irreversibly lost due to cleavage of BT C-S bonds at oxidizing potentials, which leaves adsorbed sulfur oxides on Pd and PtPd films and effects the desulfurization of BT. While Pd and PtPd films are less sulfur-resistant than Pt films, palladium oxides, which form at higher potentials than Pt oxides, oxidatively desulfurize BT. In situ spectroelectrochemical Raman spectroscopy provides real-time, chemically specific information that complements the cyclic voltammetric data. The combination of these techniques affords a powerful and convenient method for guiding the development of sulfur-tolerant PEMFC catalysts.

Microwave sinthesys and characterization of Pt and Pt-Rh-Sn electrocatalysts for ethanol oxidation

Directory of Open Access Journals (Sweden)

Jovanović Vladislava M.

2011-01-01

Full Text Available Carbon supported Pt and Pt-Rh-Sn catalysts were synthesized by microwave-polyol method in ethylene glycol solution and investigated for the ethanol electro-oxidation reaction. The catalysts were characterized in terms of structure, morphology and composition by employing XRD, STM and EDX techniques. STM analysis indicated rather uniform particles and particle size of below 2 nm for both catalysts. XRD analysis of the Pt/C catalyst revealed two phases, one with the main characteristic peaks of face centered cubic crystal structure (fcc of platinum and another related to graphite like structure of carbon support Vulcan XC-72R. However, in XRD pattern of the Pt-Rh-Sn/C catalyst diffraction peaks for Pt, Rh or Sn cannot be resolved, indicating an extremely low crystallinity. The small particle sizes and homogeneous size distributions of both catalysts should be attributed to the advantages of microwave assisted modified polyol process in ethylene glycol solution. Pt-Rh- Sn/C catalyst is highly active for the ethanol oxidation with the onset potential shifted for more than 150 mV to negative values and with currents nearly 5 times higher in comparison to Pt/C catalyst. The stability tests of the catalysts, as studied by the chronoamperometric experiments, reveal that the Pt-Rh-Sn/C catalyst is evidently less poisoned then Pt/C catalyst. The increased activity of Pt-Rh-Sn/C in comparison to Pt/C catalyst is most probably promoted by bifunctional mechanism and the electronic effect of alloyed metals.

Fixed Versus Variable Dosing of Prothrombin Complex Concentrate in Vitamin K Antagonist-Related Intracranial Hemorrhage : A Retrospective Analysis

NARCIS (Netherlands)

Abdoellakhan, Rahat Amadkhan; Miah, Ishita Parveen; Khorsand, Nakisa; Meijer, Karina; Jellema, Korne

Millions of patients receive vitamin K antagonist (VKA) therapy worldwide. Annually 0.2-1 % of all VKA users develops an intracranial hemorrhage (ICH). Prothrombin complex concentrate (PCC) is administered to restore the INR In a before and after design, we compared successful achievement of an INR

Rapid thermal annealing of FePt and FePt/Cu thin films

Energy Technology Data Exchange (ETDEWEB)

Brombacher, Christoph

2011-01-10

Chemically ordered FePt is one of the most promising materials to reach the ultimate limitations in storage density of future magnetic recording devices due to its high uniaxial magnetocrystalline anisotropy and a corrosion resistance superior to rare-earth based magnets. In this study, FePt and FePt/Cu bilayers have been sputter deposited at room temperature onto thermally oxidized silicon wafers, glass substrates and self-assembled arrays of spherical SiO{sub 2} particles with diameters down to 10 nm. Millisecond flash lamp annealing, as well as conventional rapid thermal annealing was employed to induce the phase transformation from the chemically disordered A1 phase into the chemically ordered L1{sub 0} phase. The influence of the annealing temperature, annealing time and the film thickness on the ordering transformation and (001) texture evolution of FePt films with near equiatomic composition was studied. Whereas flash lamp annealed FePt films exhibit a polycrystalline morphology with high chemical L1{sub 0} order, rapid thermal annealing can lead to the formation of chemically ordered FePt films with (001) texture on amorphous SiO{sub 2}/Si substrates. The resultant high perpendicular magnetic anisotropy and large coercivities up to 40 kOe are demonstrated. Simultaneously to the ordering transformation, rapid thermal annealing to temperatures exceeding 600 C leads to a break up of the continuous FePt film into separated islands. This dewetting behavior was utilized to create regular arrays of FePt nanostructures on SiO{sub 2} particle templates with periods down to 50 nm. The addition of Cu improves the (001) texture formation and chemical ordering for annealing temperatures T{sub a} {<=}600 C. In addition, the magnetic anisotropy and the coercivity of the ternary FePtCu alloy can be effectively tailored by adjusting the Cu content. The prospects of FePtCu based exchange spring media, as well as the magnetic properties of FePtCu nanostructures fabricated

Porous graphene supported Pt catalysts for proton exchange membrane fuel cells

International Nuclear Information System (INIS)

Cheng, Kun; He, Daping; Peng, Tao; Lv, Haifeng; Pan, Mu; Mu, Shichun

2014-01-01

Graphene nanosheet (GNS) has a remarkably high ratio of surface area to thickness and intense inter-sheet aggregation, which heavily resist mass diffusion in vertical orientation. Here, we establish a fast-speed mass diffusion passage by creating pores in GNS, and the corresponding Pt catalyst (Pt/rPGO) displays 15.5 times mass diffusion rate than that of the pristine GNS supported Pt catalyst (Pt/rGO). Thus, the Pt/rPGO catalyst exhibits 1.5 times increase in Pt mass activity toward oxygen reduction reaction compared with the Pt/rGO. Significantly, after H 2 thermal treatment, the mass activity of the Pt/rPGO further increases to 1.9 times that of the Pt/rGO, and its electrochemical stability is also greatly improved

Preparation and Thermoelectric Characteristics of ITO/PtRh:PtRh Thin Film Thermocouple.

Science.gov (United States)

Zhao, Xiaohui; Wang, Hongmin; Zhao, Zixiang; Zhang, Wanli; Jiang, Hongchuan

2017-12-15

Thin film thermocouples (TFTCs) can provide more precise in situ temperature measurement for aerospace propulsion systems without disturbance of gas flow and surface temperature distribution of the hot components. ITO/PtRh:PtRh TFTC with multilayer structure was deposited on alumina ceramic substrate by magnetron sputtering. After annealing, the TFTC was statically calibrated for multiple cycles with temperature up to 1000 °C. The TFTC with excellent stability and repeatability was realized for the negligible variation of EMF in different calibration cycles. It is believed that owing to oxygen diffusion barriers by the oxidation of top PtRh layer and Schottky barriers formed at the grain boundaries of ITO, the variation of the carrier concentration of ITO film is minimized. Meanwhile, the life time of TFTC is more than 30 h in harsh environment. This makes ITO/PtRh:PtRh TFTC a promising candidate for precise surface temperature measurement of hot components of aeroengines.

Microwave-polyol synthesis and electrocatalytic performance of Pt/graphene nanocomposites

International Nuclear Information System (INIS)

Liao, Chien-Shiun; Liao, Chien-Tsao; Tso, Ching-Yu; Shy, Hsiou-Jeng

2011-01-01

Highlights: · One-pot microwave-polyol synthesis of Pt/graphene electrocatalyst. · Simultaneous formation of Pt nanoparticles and reduction of graphene oxide. · Electrocatalytic activities depend on the morphology of the deposited Pt particles. · Dense dispersion of isolated Pt particles with high electrochemical active surface. · Few particle clusters of Pt have large number of active sites for methanol oxidation. - Abstract: Graphene oxide (GO) prepared by the modified Hummers method is used as a support in the formation of a Pt/GO nanocomposite electrocatalyst by microwave-polyol synthesis. The effects of microwave reaction times on particle size, dispersion, and electrocatalytic performance of Pt nanoparticles are studied using wide-angle X-ray diffractometery, Raman spectroscopy, transmission electron microscopy and three-electrode electrochemical measurements. The results indicate that Pt nanoparticles nucleation and growth occur, and the particles are uniformly deposited on the GO nanosheets within a short time. The maximum electrochemical active surface area 85.71 m 2 g -1 for a Pt/GO reaction time of 5 min, is a result of the deposition of a dense dispersion of small Pt particles. The highest methanol oxidation peak current density, I f , of 0.59 A mg -1 occurs for a Pt/GO reaction time of 10 min and is due to the formation of interconnecting Pt particles clusters. This novel Pt/GO nanocomposite electrocatalyst with high electrocatalytic activities has the potential for use as an anode material in fuel cells.

Evaluation of Prothrombin Time and Activated Partial ...

African Journals Online (AJOL)

and activated partial thromboplastin time (APTT) were investigated in treated and untreated diabetics as well as ... decrease the availability of these proteins which affect the clotting ... calcum rabbit brain thromboplastin reagent placed in.

Opto-electronic properties of quasi-linear, self-assembled platinum complexes : Pt-Pt distance dependence

NARCIS (Netherlands)

Debije, M.G.; Haas, de M.P.; Warman, J.M.; Fontana, M.; Stutzmann, N.; Kristiansen, M.; Caseri, W.R.; Smith, P.; Hoffmann, S.; Solling, T. I.

2004-01-01

Charge-carrier mobilities of various self-assembled platinum complexes were measured by time-resolved microwave conductivity techniques in the temperature range –80 to +100¿°C. Eight compounds were investigated in the present study, including the original Magnus' green salt ([Pt(NH3)4][PtCl4]) and

Synthesis and electrochemical study of Pt-based nanoporous materials

International Nuclear Information System (INIS)

Wang Jingpeng; Holt-Hindle, Peter; MacDonald, Duncan; Thomas, Dan F.; Chen Aicheng

2008-01-01

In the present work, a variety of Pt-based bimetallic nanostructured materials including nanoporous Pt, Pt-Ru, Pt-Ir, Pt-Pd and Pt-Pb networks have been directly grown on titanium substrates via a facile hydrothermal method. The as-fabricated electrodes were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and electrochemical methods. The active surface areas of these nanoporous Pt-based alloy catalysts are increased by over 68 (Pt-Pd), 69 (Pt-Ru) and 113 (Pt-Ir) fold compared to a polycrystalline Pt electrode. All these synthesized nanoporous electrodes exhibit superb electrocatalytic performance towards electrochemical oxidation of methanol and formic acid. Among the five nanoporous Pt-based electrodes, the Pt-Ir shows the highest peak current density at +0.50 V, with 68 times of enhancement compared to the polycrystalline Pt for methanol oxidation, and with 86 times of enhancement in formic acid oxidation; whereas the catalytic activity of the nanoporous Pt-Pb electrode outperforms the other materials in formic acid oxidation at the low potential regions, delivering an enhanced current density by 280-fold compared to the polycrystalline Pt at +0.15 V. The new approach described in this study is suitable for synthesizing a wide range of bi-metallic and tri-metallic nanoporous materials, desirable for electrochemical sensor design and potential application in fuel cells

Synthesis and electrochemical study of Pt-based nanoporous materials

Energy Technology Data Exchange (ETDEWEB)

Wang Jingpeng [Department of Chemistry, Lakehead University, Thunder Bay, Ontario P7B 5E1 (Canada); Department of Chemistry, University of Guelph, Guelph, Ontario N1G 2W1 (Canada); Holt-Hindle, Peter; MacDonald, Duncan [Department of Chemistry, Lakehead University, Thunder Bay, Ontario P7B 5E1 (Canada); Thomas, Dan F. [Department of Chemistry, University of Guelph, Guelph, Ontario N1G 2W1 (Canada); Chen Aicheng [Department of Chemistry, Lakehead University, Thunder Bay, Ontario P7B 5E1 (Canada)], E-mail: aicheng.chen@lakeheadu.ca

2008-10-01

In the present work, a variety of Pt-based bimetallic nanostructured materials including nanoporous Pt, Pt-Ru, Pt-Ir, Pt-Pd and Pt-Pb networks have been directly grown on titanium substrates via a facile hydrothermal method. The as-fabricated electrodes were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and electrochemical methods. The active surface areas of these nanoporous Pt-based alloy catalysts are increased by over 68 (Pt-Pd), 69 (Pt-Ru) and 113 (Pt-Ir) fold compared to a polycrystalline Pt electrode. All these synthesized nanoporous electrodes exhibit superb electrocatalytic performance towards electrochemical oxidation of methanol and formic acid. Among the five nanoporous Pt-based electrodes, the Pt-Ir shows the highest peak current density at +0.50 V, with 68 times of enhancement compared to the polycrystalline Pt for methanol oxidation, and with 86 times of enhancement in formic acid oxidation; whereas the catalytic activity of the nanoporous Pt-Pb electrode outperforms the other materials in formic acid oxidation at the low potential regions, delivering an enhanced current density by 280-fold compared to the polycrystalline Pt at +0.15 V. The new approach described in this study is suitable for synthesizing a wide range of bi-metallic and tri-metallic nanoporous materials, desirable for electrochemical sensor design and potential application in fuel cells.0.

Synthesis and electrochemical study of Pt-based nanoporous materials

Energy Technology Data Exchange (ETDEWEB)

Wang, Jingpeng [Department of Chemistry, Lakehead University, Thunder Bay, Ontario P7B 5E1 (Canada); Department of Chemistry, University of Guelph, Guelph, Ontario N1G 2W1 (Canada); Holt-Hindle, Peter; MacDonald, Duncan; Chen, Aicheng [Department of Chemistry, Lakehead University, Thunder Bay, Ontario P7B 5E1 (Canada); Thomas, Dan F. [Department of Chemistry, University of Guelph, Guelph, Ontario N1G 2W1 (Canada)

2008-10-01

In the present work, a variety of Pt-based bimetallic nanostructured materials including nanoporous Pt, Pt-Ru, Pt-Ir, Pt-Pd and Pt-Pb networks have been directly grown on titanium substrates via a facile hydrothermal method. The as-fabricated electrodes were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and electrochemical methods. The active surface areas of these nanoporous Pt-based alloy catalysts are increased by over 68 (Pt-Pd), 69 (Pt-Ru) and 113 (Pt-Ir) fold compared to a polycrystalline Pt electrode. All these synthesized nanoporous electrodes exhibit superb electrocatalytic performance towards electrochemical oxidation of methanol and formic acid. Among the five nanoporous Pt-based electrodes, the Pt-Ir shows the highest peak current density at +0.50 V, with 68 times of enhancement compared to the polycrystalline Pt for methanol oxidation, and with 86 times of enhancement in formic acid oxidation; whereas the catalytic activity of the nanoporous Pt-Pb electrode outperforms the other materials in formic acid oxidation at the low potential regions, delivering an enhanced current density by 280-fold compared to the polycrystalline Pt at +0.15 V. The new approach described in this study is suitable for synthesizing a wide range of bi-metallic and tri-metallic nanoporous materials, desirable for electrochemical sensor design and potential application in fuel cells. (author)

Electronic structures of PtCu, PtAg, and PtAu molecules: a Dirac four-component relativistic study

International Nuclear Information System (INIS)

Abe, Minori; Mori, Sayaka; Nakajima, Takahito; Hirao, Kimihiko

2005-01-01

Relativistic four-component calculations at several correlated levels have been performed for diatomic PtCu, PtAg, and PtAu molecules. The ground state spectroscopic constants of PtCu were calculated using the four-component MP2 method, and show good agreement with experiment. We also performed calculations on the experimentally unknown species, PtAg and PtAu, and the mono-cationic systems, PtCu + , PtAg + , and PtAu + . The low-lying excited states of these diatomic molecules were also investigated using the four-component multi-reference CI method

Energetics and dynamics of Pt dimers on Pt(110)-(1x2)

International Nuclear Information System (INIS)

Linderoth, T.R.; Horch, S.; Petersen, L.; Helveg, S.; Schoenning, M.; Laegsgaard, E.; Stensgaard, I.; Besenbacher, F.

2000-01-01

The stability and dynamics of Pt dimers on Pt(110)-(1x2) are studied using fast-scanning, variable-temperature STM. The kinetics of both dissociation and association of dimers have been quantified from a direct analysis of time-lapse STM movies. The extracted barriers are at variance with results from ab initio calculations, and we speculate that the discrepancies are due to trace amounts of gas impurities such as CO

Risk of venous thromboembolism and myocardial infarction associated with factor V Leiden and prothrombin mutations and blood type

DEFF Research Database (Denmark)

Sode, Birgitte F; Allin, Kristine H; Dahl, Morten

2013-01-01

ABO blood type locus has been reported to be an important genetic determinant of venous and arterial thrombosis in genome-wide association studies. We tested the hypothesis that ABO blood type alone and in combination with mutations in factor V Leiden R506Q and prothrombin G20210A is associated...

Tuning magnetic properties of non-collinear magnetization configuration in Pt/[Pt/Co]{sub 6}/Pt/Co/Pt multilayer structure

Energy Technology Data Exchange (ETDEWEB)

Kalaycı, Taner, E-mail: taner.kalayci@marmara.edu.tr [Department of Physics, Marmara University, 34722, Kadıköy, Istanbul (Turkey); Deger, Caner [Department of Physics, Marmara University, 34722, Kadıköy, Istanbul (Turkey); Akbulut, Salih [Department of Physics, Gebze Technical University, 41400, Gebze, Kocaeli (Turkey); Yildiz, Fikret, E-mail: fyildiz@gtu.edu.tr [Department of Physics, Gebze Technical University, 41400, Gebze, Kocaeli (Turkey)

2017-08-15

Highlights: • Effects of Pt spacer and reference layers thickness are investigated by MOKE and FMR. • Controlling of non-collinear states in multilayered thin film systems is studied. • Micromagnetic approach is used for modeling of magnetic multilayered structure. • Magnetic parameters are determined by a simulation based on metropolis algorithm. - Abstract: In this study, effects of Pt spacer and Co reference layers thickness in [Co/Pt]{sub 6}/Pt/Co multilayer have been revealed to tailor magnetization directions in non-collinear configuration. Magneto-optic Kerr effect and ferromagnetic resonance techniques were employed to investigate magnetic properties. Bilinear coupling between [Co/Pt]{sub 6} and Co layers and anisotropy constants were determined by a micromagnetic simulation based on metropolis algorithm. 3 nm spacer causes ferromagnetic coupling while the samples have 4 and 5 nm spacer are coupled anti-ferromagneticaly. Also, tuning magnetic anisotropy of [Co/Pt]{sub 6} layer was accomplished by Co reference layer. It is revealed that controlling of non-collinear states in such systems is possible by variation of thickness of spacer and reference layers and [Co/Pt]{sub 6}/t{sub Pt}/t{sub Co} trilayer system can be used in multilayered magnetic systems.

Preparation of PtSn/C, PtRu/C, PtRh/C, PtRuRh/C and PtSnRh/C electrocatalysts using an alcohol-reduction process for methanol and ethanol oxidation; Preparacao e caracterizacao de eletrocatalisadores PtRu, PtSn, PtRh, PtRuRh e PtSnRh para oxidacao direta de alcoois em celulas a combustivel tipo PEM utilizando a metodologia da reducao por alcool

Energy Technology Data Exchange (ETDEWEB)

Dias, Ricardo Rodrigues

2009-07-01

In this work, Pt/C, PtRh (90:10), PtRh/C (50:50), PtSn/C (50:50), PtRu (50:50)/C, PtRuRh/C (50:40:10) and PtSnRh/C (50:40:10) were prepared by an alcohol-reduction process with metal loading of 20 wt.% using H{sub 2}PtCl{sub 6}.6H{sub 2}O (Aldrich), SnCl{sub 2}.2H{sub 2}O (Aldrich),and RhCl{sub 2}.XH{sub 2}O (Aldrich) as metals sources and Vulcan XC72 as support. The electrocatalysts were characterized by EDX, XRD and cyclic voltammetry (CV). The electro-oxidation of ethanol was studied by CV, chronoamperomety at room temperature in acid medium and tests at 100 deg C on a single cell of a direct methanol or ethanol fuel cell. The EDX analysis showed that the metal atomic ratios of the obtained electrocatalysts were similar to the nominal atomic ratios used in the preparation. The diffractograms of electrocatalysts prepared showed four peaks at approximately 2{theta} =40 deg, 47 deg, 67 deg and 82 deg, which are associated with the (111), (200), (220) and (311) planes, respectively, of a face cubic-centered (fcc) structure characteristic of platinum and platinum alloys. The average crystallite sizes using the Scherrer equation and the calculated values were in the range of 2-3 nm. For Pt Sn/C and PtSnRh/C two additional peaks were observed at 2 = 34 deg and 52 deg that were identified as a SnO{sub 2} phase. Pt Sn/C (50:50) and PtSnRh/C (50:40:10) electro catalyst showed the best performance for ethanol oxidation at room temperature. For methanol oxidation at room temperature Pt Ru/C, Pt Sn/C and PtRuRh/C electrocatalysts showed the best performance. Tests at 100 deg C on a single cell of a direct ethanol fuel cell PtSnRh/C showed the best performance, for methanol oxidation PtRuRh/C showed the best performance. (author)

Evaluation of Factor V Leiden, Prothrombin G20210A, MTHFR C677T and MTHFR A1298C gene polymorphisms in retinopathy of prematurity in a Turkish cohort.

Science.gov (United States)

Aydin, Hatip; Gunay, Murat; Celik, Gokhan; Gunay, Betul Onal; Aydin, Umeyye Taka; Karaman, Ali

2016-12-01

To assess Factor V Leiden (FVL) (rs6025), Prothrombin G20210A (rs1799963), MTHFR C677T (rs1801133), and MTHFR A1298C (rs1801131) gene mutations as risk factors in the development of retinopathy of prematurity (ROP). A total of 105 children were included in this cross-sectional study. Patients were divided into two groups. The study group consisted of 55 infants with a history of ROP and the control group comprised 50 healthy infants with term birth. All subjects were screened for the presence of certain mutations (FVL, Prothrombin G20210A, MTHFR C677T and MTHFR A1298C) by Real-Time PCR at 1 year of age. The mean gestational age (GA) and birth weight (BW) of the study group were, 28.65 ± 2.85 weeks and 1171 ± 385.74 g, respectively. There were no significant differences of genotype and allele frequency of Prothrombin G20210A, MTHFR A1298C and MTHFR C677T between the study and control groups (p > 0.05). Eight children (14.5 %) had heterozygous and one child (1.8%) had homozygous FVL mutation in the study group. One child (2%) in the control group had heterozygous FVL mutation. There was statistically significant differences of FVL allele and genotype frequencies between the groups (p < 0.05). The prevalence of FVL polymorphism (16.3 %) was higher in ROP patients than control subjects in this Turkish cohort. We suggest a possible association of FVL mutation with ROP at the end of the study.

Pt coating on flame-generated carbon particles

International Nuclear Information System (INIS)

Choi, In Dae; Lee, Dong Geun

2008-01-01

Carbon black, activated carbon and carbon nanotube have been used as supporting materials for precious metal catalysts used in fuel cell electrodes. One-step flame synthesis method is used to coat 2-5nm Pt dots on flame-generated carbon particles. By adjusting flame temperature, gas flow rates and resident time of particles in flame, we can obtain Pt/C nano catalyst-support composite particles. Additional injection of hydrogen gas facilitates pyrolysis of Pt precursor in flame. The size of as-incepted Pt dots increases along the flame due to longer resident time and sintering in high temperature flame. Surface coverage and dispersion of the Pt dots is varied at different sampling heights and confirmed by Transmission Electron Microscopy (TEM), Energy Dispersive Spectra (EDS) and X-Ray Diffraction (XRD). Crystallinity and surface bonding groups of carbon are investigated through X-ray Photoelectron Spectroscoy (XPS) and Raman spectroscopy

The Role of Warfarin Alone or in Combination with Certain Natural Products Against Blood Disorders Induced by Gamma Radiation in Experimental Animals

International Nuclear Information System (INIS)

Fahim, M.G.; Radwan, R.R.; Shaaban, E.A.; El-Denshary, E.S.

2016-01-01

The effect of warfarin against blood disorder induced by radiation and possible effect of certain natural products in modifying anticoagulant effect of warfarin in irradiated rats was investigated. Prothrombin time (PT), international normalized ratio (INR), partial thromboplastin time (PTT), thrombin time (TT), fibrinogen level and platelet count were evaluated. Furthermore, plasma level of malondialdehyde (MDA), reduced glutathione (GSH) and nitric oxide (NO) were determined. The obtained data showed that irradiation elevated Pt, INR, PTT, TT and fibrinogen level. Moreover, irradiation increased MDA and NO levels while, reduced GSH level. It was found that administration of garlic, fenugreek or green tea with warfarin for one week before irradiation resulted in elevation in PT and INR. Results suggest that patients on warfarin and exposed to radiation are specifically advised to avoid taking herbal medicines or to have their PT and INR measured within two weeks of starting the drug, to be on a safer side

Preparation of PtSn/C, PtRu/C, PtRh/C, PtRuRh/C and PtSnRh/C electrocatalysts using an alcohol-reduction process for methanol and ethanol oxidation; Preparacao e caracterizacao de eletrocatalisadores PtRu, PtSn, PtRh, PtRuRh e PtSnRh para oxidacao direta de alcoois em celulas a combustivel tipo PEM utilizando a metodologia da reducao por alcool

Energy Technology Data Exchange (ETDEWEB)

Dias, Ricardo Rodrigues

2009-07-01

In this work, Pt/C, PtRh (90:10), PtRh/C (50:50), PtSn/C (50:50), PtRu (50:50)/C, PtRuRh/C (50:40:10) and PtSnRh/C (50:40:10) were prepared by an alcohol-reduction process with metal loading of 20 wt.% using H{sub 2}PtCl{sub 6}.6H{sub 2}O (Aldrich), SnCl{sub 2}.2H{sub 2}O (Aldrich),and RhCl{sub 2}.XH{sub 2}O (Aldrich) as metals sources and Vulcan XC72 as support. The electrocatalysts were characterized by EDX, XRD and cyclic voltammetry (CV). The electro-oxidation of ethanol was studied by CV, chronoamperomety at room temperature in acid medium and tests at 100 deg C on a single cell of a direct methanol or ethanol fuel cell. The EDX analysis showed that the metal atomic ratios of the obtained electrocatalysts were similar to the nominal atomic ratios used in the preparation. The diffractograms of electrocatalysts prepared showed four peaks at approximately 2θ = 40{sup 0}, 47{sup 0}, 67{sup 0} and 82{sup 0}, which are associated with the (111), (200), (220) and (311) planes, respectively, of a face cubic-centered (fcc) structure characteristic of platinum and platinum alloys. The average crystallite sizes using the Scherrer equation and the calculated values were in the range of 2–3 nm. For PtSn/C and PtSnRh/C two additional peaks were observed at 2θ = 34{sup 0} and 52{sup 0} that were identified as a SnO{sub 2} phase. PtSn/C (50:50) and PtSnRh/C (50:40:10) electrocatalyst showed the best performance for ethanol oxidation at room temperature. For methanol oxidation at room temperature PtRu/C, PtSn/C and PtRuRh/C electrocatalysts showed the best performance. Tests at 100 deg C on a single cell of a direct ethanol fuel cell PtSnRh/C showed the best performance, for methanol oxidation PtRuRh/C showed the best performance. (author)

Coagulation Tests and Selected Biochemical Analytes in Dairy Cows with Hepatic Lipidosis

OpenAIRE

S. Padilla-Arellanes; F. Constantino-Casas; L. Núnez-Ochoa; J. Doubek; C. Vega-Murguia; J. Bouda

2007-01-01

The aim of this study was to determine the values and changes in conventional and optimised clotting tests, as well as in selected biochemical analytes during hepatic lipidosis in postpartum dairy cows. Ten healthy and ten Holstein cows with hepatic lipidosis were selected based upon clinical history, clinical examination, liver biopsy, flotation test and histological analysis of hepatic tissue. Prothrombin time (PT) and partial thromboplastin time (PTT) were determined in non-diluted and dil...

The changes in the fibrinogen concentration and coagulation pathways in winter and summer in cattle

Directory of Open Access Journals (Sweden)

ameneh khoshvaghti

2013-08-01

Full Text Available Fibrinogen is an important coagulation factor and a positive acute phase protein and its levels increases in cases of inflammation infection and stress. The present research was done to determine whether the fibrinogen concentration, prothrombin time (PT and activated partial thromboplastin time (APTT can be affected by seasonal changes. In this study, the blood of ten apparently healthy cows from around Yasouj city were taken under aseptic conditions and, then the plasma was separated. The fibrinogen concentration, was assayed by sedimentation refractometry method, PT and APTT were measurement by coagolometric method. The statistical analysis indicated that there was significant difference between the mean concentration of fibrinogen in summer and winter (P0.05. It is concluded that seasonal changes can affect the fibrinogen concentration but does no affect PT and APTT significantly.

Preparation of Pt Nanocatalyst on Carbon Materials via a Reduction Reaction of a Pt Precursor in a Drying Process.

Science.gov (United States)

Lee, Jae-Young; Lee, Woo-Kum; Rim, Hyung-Ryul; Joung, Gyu-Bum; Weidner, John W; Lee, Hong-Ki

2016-06-01

Platinum (Pt) nanocatalyst for a proton-exchange membrane fuel cell (PEMFC) was prepared on a carbon black particle or a graphite particle coated with a nafion polymer via a reduction of platinum(II) bis(acetylacetonate) denoted as Pt(acac)2 as a Pt precursor in a drying process. Sublimed Pt(acac)2 adsorbed on the nafion-coated carbon materials was reduced to Pt nanoparticles in a glass reactor at 180 degrees C of N2 atmosphere. The morphology of Pt nanoparticles on carbon materials was observed by scanning electron microscopy (SEM) and the distribution of Pt nanoparticles was done by transmission electron microscopy (TEM). The particle size was estimated by analyzing the TEM image using an image analyzer. It was found that nano-sized Pt particles were deposited on the surface of carbon materials, and the number density and the average particle size increased with increasing reduction time.

Preparation of PtSn/C, PtRu/C, PtRh/C, PtRuRh/C and PtSnRh/C electrocatalysts using an alcohol-reduction process for methanol and ethanol oxidation

International Nuclear Information System (INIS)

Dias, Ricardo Rodrigues

2009-01-01

In this work, Pt/C, PtRh (90:10), PtRh/C (50:50), PtSn/C (50:50), PtRu (50:50)/C, PtRuRh/C (50:40:10) and PtSnRh/C (50:40:10) were prepared by an alcohol-reduction process with metal loading of 20 wt.% using H 2 PtCl 6 .6H 2 O (Aldrich), SnCl 2 .2H 2 O (Aldrich),and RhCl 2 .XH 2 O (Aldrich) as metals sources and Vulcan XC72 as support. The electrocatalysts were characterized by EDX, XRD and cyclic voltammetry (CV). The electro-oxidation of ethanol was studied by CV, chronoamperomety at room temperature in acid medium and tests at 100 deg C on a single cell of a direct methanol or ethanol fuel cell. The EDX analysis showed that the metal atomic ratios of the obtained electrocatalysts were similar to the nominal atomic ratios used in the preparation. The diffractograms of electrocatalysts prepared showed four peaks at approximately 2θ = 40 0 , 47 0 , 67 0 and 82 0 , which are associated with the (111), (200), (220) and (311) planes, respectively, of a face cubic-centered (fcc) structure characteristic of platinum and platinum alloys. The average crystallite sizes using the Scherrer equation and the calculated values were in the range of 2–3 nm. For PtSn/C and PtSnRh/C two additional peaks were observed at 2θ = 34 0 and 52 0 that were identified as a SnO 2 phase. PtSn/C (50:50) and PtSnRh/C (50:40:10) electrocatalyst showed the best performance for ethanol oxidation at room temperature. For methanol oxidation at room temperature PtRu/C, PtSn/C and PtRuRh/C electrocatalysts showed the best performance. Tests at 100 deg C on a single cell of a direct ethanol fuel cell PtSnRh/C showed the best performance, for methanol oxidation PtRuRh/C showed the best performance. (author)

Pt-Ni and Pt-Co Catalyst Synthesis Route for Fuel Cell Applications

Science.gov (United States)

Firdosy, Samad A.; Ravi, Vilupanur A.; Valdez, Thomas I.; Kisor, Adam; Narayan, Sri R.

2013-01-01

Oxygen reduction reactions (ORRs) at the cathode are the rate-limiting step in fuel cell performance. The ORR is 100 times slower than the corresponding hydrogen oxidation at the anode. Speeding up the reaction at the cathode will improve fuel cell efficiency. The cathode material is generally Pt powder painted onto a substrate (e.g., graphite paper). Recent efforts in the fuel cell area have focused on replacing Pt with Pt-X alloys (where X = Co, Ni, Zr, etc.) in order to (a) reduce cost, and (b) increase ORR rates. One of these strategies is to increase ORR rates by reducing the powder size, which would result in an increase in the surface area, thereby facilitating faster reaction rates. In this work, a process has been developed that creates Pt-Ni or Pt-Co alloys that are finely divided (on the nano scale) and provide equivalent performance at lower Pt loadings. Lower Pt loadings will translate to lower cost. Precursor salts of the metals are dissolved in water and mixed. Next, the salt mixtures are dried on a hot plate. Finally, the dried salt mixture is heattreated in a furnace under flowing reducing gas. The catalyst powder is then used to fabricate a membrane electrode assembly (MEA) for electrochemical performance testing. The Pt- Co catalyst-based MEA showed comparable performance to an MEA fabri cated using a standard Pt black fuel cell catalyst. The main objective of this program has been to increase the overall efficiencies of fuel cell systems to support power for manned lunar bases. This work may also have an impact on terrestrial programs, possibly to support the effort to develop a carbon-free energy source. This catalyst can be used to fabricate high-efficiency fuel cell units that can be used in space as regenerative fuel cell systems, and terrestrially as primary fuel cells. Terrestrially, this technology will become increasingly important when transition to a hydrogen economy occurs.

Consumption of Pt anode in phosphoric acid

Energy Technology Data Exchange (ETDEWEB)

Kamiya, N.; Urata, K.; Motohira, N.; Ota, K. [Yokohama National University, Yokohama (Japan)

1997-12-05

Consumption of Pt anode was investigated in phosphoric acid of various concentration. In 30-70wt% phosphoric acid, Pt dissolved at the rate of 19{mu}gcm{sup -2}h{sup -1}. On the other hand, in 85 wt% phosphoric acid, the amount increased to 0.91 mgcm{sup -2}h{sup -1} which is ca. 180 and 1800 times as much as in 1M sulfuric acid and 1M alkaline solution, respectively. In the diluted phosphoric acid solution, the Pt surface was covered with Pt oxides during the electrolysis, which would prevent the surface from corrosion. However, in the concentrated phosphoric acid, no such oxide surface was observed. Concentrated phosphoric acid might form stable complex with Pt species, therefore the uncovered bare Pt surface is situated in the serious corrosion condition under the high overvoltage and Pt would dissolve into the solution directly instead of forming the Pt oxides. 11 refs., 9 figs., 1 tab.

MoS2/Pt nanocomposite-functionalized microneedle for real-time monitoring of hydrogen peroxide release from living cells.

Science.gov (United States)

Zhou, Jin-Xiu; Tang, Li-Na; Yang, Fan; Liang, Feng-Xia; Wang, Hua; Li, Yu-Tao; Zhang, Guo-Jun

2017-11-06

This work describes the adaptive use of a conventional stainless steel acupuncture needle as the electrode substrate for construction of a molybdenum disulfide (MoS 2 ) and platinum nanoparticles (PtNPs) layer-modified microneedle sensor for real-time monitoring of hydrogen peroxide (H 2 O 2 ) release from living cells. To construct the nanocomposite-functionalized microneedle, the needle surface was first coated with a gold film by ion sputtering to enhance the conductivity. Subsequently, an electrochemical deposition method was successfully employed to deposit MoS 2 nanosheet and Pt nanoparticles on the needle tip as the sensing interface. Electrochemical study demonstrated that the MoS 2 /PtNPs nanocomposite-modified needle exhibited excellent catalytic performance and low over-potential toward the reduction of H 2 O 2 . Not only did the microneedle achieve a wide linear range from 1 to 100 μmol L -1 with a limit of detection down to 0.686 μmol L -1 , but it also realized the highly specific detection of H 2 O 2 . Owing to these remarkable analytical advantages, the prepared microneedle was applied to determine H 2 O 2 release from living cells with satisfactory results. The MoS 2 /PtNPs nanocomposite-functionalized microneedle sensor is simple and affordable, and can serve as a promising electrochemical nonenzymatic sensing platform. Moreover, this superfine needle sensor shows great potential for real-time monitoring of reactive oxygen species in vivo with minimal damage.

All-optical measurement of interlayer exchange coupling in Fe/Pt/FePt thin films

Science.gov (United States)

Berk, C.; Ganss, F.; Jaris, M.; Albrecht, M.; Schmidt, H.

2018-01-01

Time Resolved Magneto Optic Kerr Effect spectroscopy was used to all-optically study the dynamics in exchange coupled Fe(10 nm)/Pt(x = 0-5 nm)/FePt (10 nm) thin films. As the Pt spacer decreases, the effective magnetization of the layers is seen to evolve towards the strong coupling limit where the two films can be described by a single effective magnetization. The coupling begins at x = 1.5 nm and reaches a maximum exchange coupling constant of 2.89 erg/cm2 at x = 0 nm. The films are ferromagnetically coupled at all Pt thicknesses in the exchange coupled regime (x ≤ 1.5 nm). A procedure for extracting the interlayer exchange constant by measuring the magnetic precession frequencies at multiple applied fields and angles is outlined. The dynamics are well reproduced using micromagnetic simulations.

Crossing rule for a PT-symmetric two-level time-periodic system

International Nuclear Information System (INIS)

Moiseyev, Nimrod

2011-01-01

For a two-level system in a time-periodic field we show that in the non-Hermitian PT case the level crossing is of two quasistationary states that have the same dynamical symmetry property. At the field's parameters where the two levels which have the same dynamical symmetry cross, the corresponding quasienergy states coalesce and a self-orthogonal state is obtained. This situation is very different from the Hermitian case where a crossing of two quasienergy levels happens only when the corresponding two quasistationary states have different dynamical symmetry properties and, unlike the situation in the non-Hermitian case, the spectrum remains complete also when the two levels cross.

Improvement of plant reliability in PT. Badak LNG plant

International Nuclear Information System (INIS)

Achmad, S.; Somantri, A.

1997-01-01

PT. Badak's LNG sales commitment has been steadily increasing, therefore, there has been more emphasis to improve and maintain the LNG plant reliability. From plant operation historical records, Badak LNG plant experienced a high number of LNG process train trips and down time for 1977 through 1988. The highest annual number of LNG plant trips (50 times) occurred in 1983 and the longest LNG process train down time (1259 train-hours) occurred in 1988. Since 1989, PT. Badak has been able to reduce the number of LNG process train trips and down time significantly. In 1994 the number of LNG process train trips and was 18 times and the longest LNG process train down time was 377 train-hours. This plant reliability improvement was achieved by implementing plant reliability improvement programs beginning with the design of the new facilities and continuing with the maintenance and modification of the existing facilities. To improve reliability of the existing facilities, PT. Badak has been implementing comprehensive maintenance programs, to reduce the frequency and down time of the plant, such as Preventive and Predictive Maintenance as well as procurement material improvement since PT. Badak location is in a remote area. By implementing the comprehensive reliability maintenance, PT. Badak has been able to reduce the LNG process train trips to 18 and down time to 337 train hours in 1994 with the subsequent maintenance cost reduction. The average PT. Badak plant availability from 1985 to 1995 is 94.59%. New facilities were designed according to the established PT. Badak design philosophy, master plan and specification. Design of new facilities was modified to avoid certain problems from past experience. (au)

Pt-Rh alloys. Investigation of creep rate and rupture time at high temperatures

Energy Technology Data Exchange (ETDEWEB)

Trumic, Biserka; Gomidzelovic, Lidija; Marjanovic, Sasa; Ivanovic, Aleksandra; Dimitrijevic, Silvana [Belgrade Univ., Bor (Serbia). Inst. of Mining and Metallurgy; Krstic, Vesna

2013-02-01

The results of experimental investigation of creep rate and rupture time of the alloys of Pt-Rh system are presented in this paper. Selected alloys with 7-40 wt.-% Rh content were examined using a universal device for tensile testing of materials at high temperatures, and monitoring structure changes of the samples by electron microscopy. Investigations were performed in the temperature range between 1200 C and 1700 C at a stress between 2 MPa and 15 MPa. (orig.)

Exchange bias and perpendicular anisotropy study of ultrathin Pt-Co-Pt-IrMn multilayers sputtered on float glass

Science.gov (United States)

Laval, M.; Lüders, U.; Bobo, J. F.

2007-09-01

We have prepared ultrathin Pt-Co-Pt-IrMn polycrystalline multilayers on float-glass substrates by DC magnetron sputtering. We have determined the optimal set of thickness for both Pt layers, the Co layer and the IrMn biasing layer so that these samples exhibit at the same time out-of-plane magnetic anisotropy and exchange bias. Kerr microscopy domain structure imaging evidences an increase of nucleation rate accompanied with inhomogeneous magnetic behavior in the case of exchange-biased films compared to Pt-Co-Pt trilayers. Polar hysteresis loops are measured in obliquely applied magnetic field conditions, allowing us to determine both perpendicular anisotropy effective constant Keff and exchange-bias coupling JE, which are significantly different from the ones determined by standard switching field measurements.

Exchange bias and perpendicular anisotropy study of ultrathin Pt-Co-Pt-IrMn multilayers sputtered on float glass

International Nuclear Information System (INIS)

Laval, M.; Lueders, U.; Bobo, J.F.

2007-01-01

We have prepared ultrathin Pt-Co-Pt-IrMn polycrystalline multilayers on float-glass substrates by DC magnetron sputtering. We have determined the optimal set of thickness for both Pt layers, the Co layer and the IrMn biasing layer so that these samples exhibit at the same time out-of-plane magnetic anisotropy and exchange bias. Kerr microscopy domain structure imaging evidences an increase of nucleation rate accompanied with inhomogeneous magnetic behavior in the case of exchange-biased films compared to Pt-Co-Pt trilayers. Polar hysteresis loops are measured in obliquely applied magnetic field conditions, allowing us to determine both perpendicular anisotropy effective constant K eff and exchange-bias coupling J E , which are significantly different from the ones determined by standard switching field measurements

Comparison of 3-Factor Prothrombin Complex Concentrate and Low-Dose Recombinant Factor VIIa for Warfarin Reversal

OpenAIRE

Chapman, Scott A; Irwin, Eric D; Abou-Karam, Nada M; Rupnow, Nichole M; Hutson, Katherine E; Vespa, Jeffrey; Roach, Robert M

2014-01-01

Introduction Prothrombin complex concentrate (PCC) and recombinant Factor VIIa (rFVIIa) have been used for emergent reversal of warfarin anticoagulation. Few clinical studies have compared these agents in warfarin reversal. We compared warfarin reversal in patients who received either 3 factor PCC (PCC3) or low-dose rFVIIa (LDrFVIIa) for reversal of warfarin anticoagulation. Methods Data were collected from medical charts of patients who received at least one dose of PCC3 (20 units/kg) or LDr...

Pt/XC-72 catalysts coated with nitrogen-doped carbon (Pt/XC-72@C–N) for methanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Cao, Jun; Chu, Yuanyuan; Tan, Xiaoyao, E-mail: cestanxy@aliyun.com

2014-03-01

Pt/XC-72 catalysts coated with N-doped carbon (denoted as Pt/XC-72@C–N) for the electro-oxidation of methanol are prepared through a combined microwave-assisted polyol with in-situ carbonization of N-doped carbon coating process using polyvinylpyrrolidone (PVP), 1-vinyl-3-ethylimidazolium nitrate (VEIN) or 1-ethyl-3-methylimidazolium dicyanamide (EMID) ionic liquid as the N-doped carbon precursor. X-ray diffraction, energy dispersive of X-ray, transmission electron microscopy, X-ray photoelectron spectroscopy, cyclic voltammograms and accelerated aging test techniques are applied to characterize the structure and the electro-catalytic activity of the catalysts. The results show that the Pt particles with the average size of around 2.5 nm are highly dispersed in face-centered cubic crystal structure in the carbon support. The structure of the N-doped carbon coating precursor has considerable influence on the electro-catalytic performance of the catalysts. The resultant catalyst with EMID ionic liquid as the N-doped carbon source exhibits 115.9 m{sup 2} g{sup −1}Pt electrochemical surface area (ESA) and 0.66 A mg{sup −1}Pt catalytic activity towards the electro-oxidation of methanol, which are 1.37 times the ESA and 1.35 times the catalytic activity of the PVP-derived catalyst, and 2.02 times the electrochemical surface area and 1.94 times the catalytic activity of the VEIN-derived catalyst. The appropriate amount of the EMID ionic liquid used in the catalyst synthesis process is around 10 uL for 100 mg XC-72 support so as to obtain the highest electro-catalytic activity. - Highlights: • N-doped carbon coated Pt/C catalyst is prepared for methanol electro-oxidation. • Pt/XC-72@C–N exhibits excellent electrocatalytic activity over uncoated catalysts. • Ionic liquid with anionic cyano groups is most suitable as N-doped carbon precursor. • The appropriate amount of ionic liquid for coating is around 10 μL for 100 mg carbon.

Effect of Centrifuge Temperature on Routine Coagulation Tests.

Science.gov (United States)

Yazar, Hayrullah; Özdemir, Fatma; Köse, Elif

2018-01-01

This study investigated the effects of cooled and standard centrifuges on the results of coagulation tests to examine the effects of centrifugation temperature. Equal-volume blood samples from each patient were collected at the same time intervals and subjected to standard (25°C) and cooled centrifugation (2-4°C). Subsequently, the prothrombin time (PT), international normalized ratio (INR), activated partial thromboplastin time (aPTT), fibrinogen, and D-dimer values were determined in runs with the same lot numbers in the same coagulation device using the Dia-PT R (PT and INR), Dia-PTT-liquid (aPTT), Dia-FIB (fibrinogen), and Dia-D-dimer kits, respectively. The study enrolled 771 participants. The PT was significantly (p centrifuges were as follows: PT 10.30 versus 10.50 s; PT (INR) 1.04 versus 1.09 s; APTT 28.90 versus 29.40 s; fibrinogen 321.5 versus 322.1 mg/dL; and D-dimer 179.5 versus 168.7 µg FEU/mL. There were significant differences (p centrifuges. Centrifuge temperature can have a significant effect on the results of coagulation tests. However, broad and specific disease-based studies are needed. © 2018 S. Karger AG, Basel.

Conducting filaments in Pt/ZrCuO{sub y}/Pt resistive switching memory cells

Energy Technology Data Exchange (ETDEWEB)

Tulu, Berhanu [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan (China); Chu, Jinn P., E-mail: jpchu@mail.ntust.edu.tw [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan (China); Wang, Sea-Fue [Department of Materials and Minerals Resources Engineering, National Taipei University of Technology, Taipei 10608, Taiwan (China)

2015-11-15

Forming-free unipolar resistive switching with good retention time, low voltage (<1.9 V) and thin thickness (∼11 nm) is obtained in oxygen deficient Pt/ZrCuO{sub y}/Pt devices. Annealing at 150 °C is beneficial to improve the endurance from 286 to >6 × 10{sup 3} and the resistance ratio from ∼13 to ∼25. Nanoscale current path images observed using a conductive atomic force microscope reveal a current density of ∼3.0 × 10{sup 2} nA/μm{sup 2} in the ON state, almost four orders of magnitude higher than ∼3.3 × 10{sup −2} nA/μm{sup 2} in the OFF state. The resistive switching is thought to be dominated by the oxygen vacancies, which serves as the filamentary conduction in the film. - Highlights: • Oxygen deficient Pt/ZrCuOy/Pt device after annealing at 150 °C is studied. • Forming-free resistive switching with good retention time, low voltage is obtained. • Annealing is shown to improve the endurance from 286 to >6 × 10{sup 3}. • The resistive switching is thought to be dominated by the oxygen vacancies.

Surface enrichment of Pt in stable Pt-Ir nano-alloy particles on MgAl 2 O 4 spinel in oxidizing atmosphere

Energy Technology Data Exchange (ETDEWEB)

Li, Weizhen; Nie, Lei; Chen, Ying; Kovarik, Libor; Liu, Jun; Wang, Yong

2017-04-01

With the capability of MgAl2O4 spinel {111} nano-facets in stabilizing small Rh, Ir and Pt particles, bimetallic Ir-Pt catalysts on the same support were investigated, aiming at further lowering the catalyst cost by substituting expensive Pt with cheaper Ir in the bulk. Small Pt-Ir nano-alloy particles (< 2nm) were successfully stabilized on the spinel {111} nano-facets as expected. Interestingly, methanol oxidative dehydrogenation (ODH) rate on the surface Pt atoms increases with oxidizing aging but decreases upon reducing treatment, where Ir is almost inactive under the same reaction conditions. Up to three times enhancement in Pt exposure was achieved when the sample was oxidized at 800 °C in air for 1 week and subsequently reduced by H2 for 2 h, demonstrating successful surface enrichment of Pt on Pt-Ir nano-alloy particles. A dynamic stabilization mechanism involving wetting\

The influence of Pt redistribution on Ni1-xPtxSi growth properties

International Nuclear Information System (INIS)

Demeulemeester, J.; Smeets, D.; Temst, K.; Vantomme, A.; Comrie, C. M.; Van Bockstael, C.; Knaepen, W.; Detavernier, C.

2010-01-01

We have studied the influence of Pt on the growth of Ni silicide thin films by examining the Pt redistribution during silicide growth. Three different initial Pt configurations were investigated, i.e., a Pt alloy (Ni+Pt/ ), a Pt capping layer (Pt/Ni/ ) and a Pt interlayer (Ni/Pt/ ), all containing 7 at. % Pt relative to the Ni content. The Pt redistribution was probed using in situ real-time Rutherford backscattering spectrometry (RBS) whereas the phase sequence was monitored during the solid phase reaction (SPR) using in situ real-time x-ray diffraction. We found that the capping layer and alloy exhibit a SPR comparable to the pure Ni/ system, whereas Pt added as an interlayer has a much more drastic influence on the Ni silicide phase sequence. Nevertheless, for all initial sample configurations, Pt redistributes in an erratic way. This phenomenon can be assigned to the low solubility of Pt in Ni 2 Si compared to NiSi and the high mobility of Pt in Ni 2 Si compared to pure Ni. Real-time RBS further revealed that the crucial issue determining the growth properties of each silicide phase is the Pt concentration at the Si interface during the initial stages of phase formation. The formation of areas rich in Pt reduce the Ni silicide growth kinetics which influences the phase sequence and properties of the silicides.

Endoscopic extraperitoneal radical prostatectomy after radical resection of pT1-pT2 rectal cancer: a report of thirty cases.

Science.gov (United States)

Liu, Zhuo; Li, Dechuan; Chen, Yinbo

2017-01-01

Endoscopic extraperitoneal radical prostatectomy (EERPE) has gained popularity for the treatment of localized prostate cancer. However, prior complex lower abdominal or pelvic surgery can complicate subsequent EERPE. To date, there have been few reports on patients who underwent EERPE after radical resection of pT1-pT2 rectal cancer. To present our experience with EERPE in patients after radical resection of pT1-pT2 rectal carcinoma and introduce a simple and effective way to create an extraperitoneal working space. Thirty patients after radical resection of pT1-pT2 rectal carcinoma were treated with EERPE for biopsy-proven localized prostate cancer. Operation time, estimated blood loss, conversion to open surgery rate, transfusion rate and transurethral catheter time were recorded. Meanwhile, functional outcome (continence and potency) and oncological outcome were reviewed. The average operative time was 168 min. Mean blood loss was 195 ml. There was no need for conversion to open surgery or transfusion. The catheter was removed on postoperative day (POD) 7.8. After a mean follow-up time of 53.1 months, 3 patients had a prostate-specific antigen level relapse over 0.1 ng/ml. At the follow-up time, 26 patients were completely continent, and 4 needed 1-2 pads/day. Of the 6 patients who underwent neurovascular bundle preservation, none have experienced return of erections at the last follow-up time. Endoscopic extraperitoneal radical prostatectomy after radical resection of rectal carcinoma appears promising, with feasibility in experienced hands. The operative data, postoperative urinary incontinence and oncological outcomes appear encouraging, but the rate of erectile dysfunction seems to be disappointing.

Reversibility of Pt-Skin and Pt-Skeleton Nanostructures in Acidic Media.

Science.gov (United States)

Durst, Julien; Lopez-Haro, Miguel; Dubau, Laetitia; Chatenet, Marian; Soldo-Olivier, Yvonne; Guétaz, Laure; Bayle-Guillemaud, Pascale; Maillard, Frédéric

2014-02-06

Following a well-defined series of acid and heat treatments on a benchmark Pt3Co/C sample, three different nanostructures of interest for the electrocatalysis of the oxygen reduction reaction were tailored. These nanostructures could be sorted into the "Pt-skin" structure, made of one pure Pt overlayer, and the "Pt-skeleton" structure, made of 2-3 Pt overlayers surrounding the Pt-Co alloy core. Using a unique combination of high-resolution aberration-corrected STEM-EELS, XRD, EXAFS, and XANES measurements, we provide atomically resolved pictures of these different nanostructures, including measurement of the Pt-shell thickness forming in acidic media and the resulting changes of the bulk and core chemical composition. It is shown that the Pt-skin is reverted toward the Pt-skeleton upon contact with acid electrolyte. This change in structure causes strong variations of the chemical composition.

Coulomb excitation of the 4+1 states of 194Pt, 196Pt and 198Pt

International Nuclear Information System (INIS)

Fewell, M.P.; Gyapong, G.J.; Spear, R.H.

1987-09-01

Probabilities for the Coulomb excitation of the 4 1 + states of 194 Pt, 196 Pt, 198 Pt by the backscattering of 4 He, 12 C and 16 O ions are reported. Model-independent values of the matrix elements 1 + ; M(E4), 4 1 + > and 1 + , M(E2), 4 1 + > are extracted. Agreement with previous measurements of these matrix elements is good. Values of β 2 and β 4 are determined for 194 Pt and compared with calculations of these quantities

Comparison of three-factor and four-factor prothrombin complex concentrates regarding reversal of the anticoagulant effects of rivaroxaban in healthy volunteers

NARCIS (Netherlands)

Levi, M. [=Marcel M.; Moore, K. T.; Castillejos, C. F.; Kubitza, D.; Berkowitz, S. D.; Goldhaber, S. Z.; Raghoebar, M.; Patel, M. R.; Weitz, J. I.; Levy, J. H.

2014-01-01

Four-factor prothrombin complex concentrates (PCCs), which contain factor II, FVII, FIX, and FX, have shown the potential to reverse the anticoagulant effect of rivaroxaban in healthy volunteers. The purpose of this study was to determine whether a three-factor PCC, which contains little FVII, has a

Tranexamic Acid Failed to Reverse the Anticoagulant Effect and Bleeding by an Oral Direct Factor Xa Inhibitor Edoxaban.

Science.gov (United States)

Honda, Yuko; Furugohri, Taketoshi; Morishima, Yoshiyuki

2018-01-01

Agents to reverse the anticoagulant effect of edoxaban, an oral direct factor Xa inhibitor, would be desirable in emergency situations. The aim of this study is to determine the effect of tranexamic acid, an antifibrinolytic agent, on the anticoagulant activity and bleeding by edoxaban in rats. A supratherapeutic dose of edoxaban (3 mg/kg) was intravenously administered to rats. Three minutes after dosing, tranexamic acid (100 mg/kg) was given intravenously. Bleeding was induced by making an incision with a blade on the planta 8 min after edoxaban injection and bleeding time was measured. Prothrombin time (PT) and clot lysis were examined. A supratherapeutic dose of edoxaban significantly prolonged PT and bleeding time. Tranexamic acid did not affect PT or bleeding time prolonged by edoxaban, although tranexamic acid significantly inhibited clot lysis in rat plasma. An antifibrinolytic agent tranexamic acid failed to reverse the anticoagulant effect and bleeding by edoxaban in rats. © 2017 S. Karger AG, Basel.

High Pt utilization PEMFC electrode obtained by alternative ion-exchange/electrodeposition.

Science.gov (United States)

Chen, Siguo; Wei, Zidong; Li, Hua; Li, Li

2010-12-14

High Pt utilization PEMFC electrodes were prepared by an alternative ion-exchange/electrodeposition (AIEE) technique. The results demonstrated that the MEA employing an AIEE electrode with a Pt loading of 0.014 mg Pt cm(-2) exhibits performance approximately 2.2 times larger than that employing a conventional Nafion-bonded Pt/C electrode with a same Pt loading.

Concomitant homozygosity for the prothrombin gene variant with mild deficiency of antithrombin III in a patient with multiple hepatic infarctions: a case report

Directory of Open Access Journals (Sweden)

Macheta M

2010-04-01

Full Text Available Abstract Introduction Hereditary causes of visceral thrombosis or thrombosis should be sought among young patients. We present a case of a young man presenting with multiple hepatic infarctions resulting in portal hypertension due to homozygosity of the prothrombin gene mutation not previously described in literature. Case presentation A 42-year-old Caucasian man with a previous history of idiopathic deep vein thrombosis 11 years earlier presented with vague abdominal pains and mildly abnormal liver function tests. An ultrasound and computed tomography scan showed evidence of hepatic infarction and portal hypertension (splenic varices. A thrombophilia screen confirmed a homozygous mutation for the prothrombin gene mutation, with mildly reduced levels of anti-thrombin III (AT III. Subsequent testing of his father and brother revealed heterozygosity for the same gene mutation. Conclusion Hepatic infarction is unusual due to the rich dual arterial and venous blood supply to the liver. In the absence of an arterial or haemodynamic insult causing hepatic infarction, a thrombophilia should be considered. To our knowledge, this is the first reported case of a hepatic infarction due to homozygosity of the prothrombin gene mutation. It is unclear whether homozygotes have a higher risk of thrombosis than heterozygotes. In someone presenting with a first thrombosis with this mutation, the case for life-long anticoagulation is unclear, but it may be necessary to prevent a second and more severe second thrombotic event, as occurred in this case.

Preparation of PtRu/C and PtSn/C electrocatalysts using electron beam irradiation for direct and ethanol fuel cell

International Nuclear Information System (INIS)

Silva, Dionisio Furtunato da

2009-01-01

PtRu/C and PtSn/C electrocatalysts were prepared using electron beam irradiation. The metal ions were dissolved in water/2-propanol and water/ethylene glycol solutions and the carbon support was added. The resulting mixtures were irradiated under stirring. The effect of water/ethylene glycol and water/2-propanol (v/v) ratio, Pt:Ru and Pt:Sn atomic ratios, the irradiation time and dose rate were studied. The obtained materials were characterized by Energy dispersive analysis of X-rays (EDX), X-ray diffraction (XRD), cyclic voltammetry (CV) and Moessbauer spectroscopy. The electro-oxidation of methanol and ethanol were studied by cyclic voltammetry and chronoamperometry using the thin porous coating technique. The electrocatalysts were also tested on the Direct Methanol and Ethanol Fuel Cells. PtRu/C electrocatalysts prepared in water/ethylene glycol showed Pt:Ru atomic ratios different from the nominal ones. The results suggested that part of the Ru(III) ions were not reduced. The obtained materials showed the face-centered cubic (fcc) structure of Pt and Pt alloys with crystallite sizes of 2-3 nm. PtRu/C electrocatalysts prepared in water/2-propanol showed Pt:Ru atomic ratios similar to the nominal ones. The obtained materials also showed the fcc structure of platinum and platinum alloys with crystallite sizes of 3-4 nm. PtSn/C electrocatalysts prepared in water/ethylene glycol and water/2-propanol showed Pt:Sn atomic ratios similar to the nominal ones. The obtained materials showed the platinum (fcc) phase with crystallite sizes in the range of 2 - 4 nm and a SnO 2 (cassiterite) phase. The obtained PtRu/C and PtSn/C electrocatalysts showed similar or superior performance for methanol and ethanol electro-oxidation compared to commercial PtRu/C (E-TEK) and PtSn/C (BASF) electrocatalysts. (author)

Results of the Proficiency Test, PT1 and PT2, 2012

DEFF Research Database (Denmark)

Vendramin, Niccolò; Nicolajsen, Nicole; Christophersen, Maj-Britt

A comparative test of diagnostic procedures was provided by the European Union Reference Laboratory (EURL) for Fish Diseases. The test was divided into proficiency test 1 (PT1) and proficiency test 2 (PT2). The number of National Reference Laboratories (NRLs) participating in PT1 and PT2 was 43. ....... The tests were sent from the EURL in the beginning of September 2012. Both PT1 and PT2 are accredited by DANAK under registration number 515 for proficiency testing according to the quality assurance standard DS/EN ISO/IEC 17043....

Elevated levels of antibodies against phosphatidylserine/prothrombin complex and/or cardiolipin associated with infection and recurrent purpura in a child: a forme fruste of antiphospholipid syndrome?

Science.gov (United States)

Kinoshita, Yuri; Mayumi, Nobuko; Inaba, Motoyuki; Igarashi, Touru; Katagiri, Ichigen; Kawana, Seiji

2015-07-15

Antiphospholipid syndrome is an autoimmune disorder characterized by the occurrence of venous and arterial thrombosis, as well as morbidity in pregnancy, in the presence of anti-phospholipid antibodies. The diagnosis of antiphospholipid syndrome is usually established based on clinical and laboratory findings by strictly following the 2006 Sapporo classification. However, the diagnosis remains challenging owing to the ongoing debates on the serological criteria. We report a case we describe as forme fruste antiphospholipid syndrome in which these criteria were not fulfilled. Purpura appeared repeatedly in a female infant starting from the age of 6 months and following episodes of upper respiratory infections and vaccinations. The levels of anti-cardiolipin IgG antibodies and anti-phosphatidylserine/prothrombin complex antibodies were elevated in accordance with these events. Histopathological evaluation revealed multiple small vessel thrombi in the dermis and adipose tissue. After 2 weeks of treatment with aspirin and heparin, the cutaneous symptoms subsided. Infection has long been associated with antiphospholipid syndrome, and anti-phosphatidylserine/prothrombin antibodies are considered a new marker for the diagnosis of antiphospholipid syndrome. Forme fruste antiphospholipid syndrome should be considered even if the antiphospholipid syndrome diagnostic criteria are not completely fulfilled, especially in the presence of elevated levels of anti-phosphatidylserine/prothrombin antibodies and known preceding infections.

PT-symmetry management in oligomer systems

International Nuclear Information System (INIS)

Horne, R L; Cuevas, J; Kevrekidis, P G; Whitaker, N; Abdullaev, F Kh; Frantzeskakis, D J

2013-01-01

We study the effects of management of the PT-symmetric part of the potential within the setting of Schrödinger dimer and trimer oligomer systems. This is done by rapidly modulating in time the gain/loss profile. This gives rise to a number of interesting properties of the system, which are explored at the level of an averaged equation approach. Remarkably, this rapid modulation provides for a controllable expansion of the region of exact PT-symmetry, depending on the strength and frequency of the imposed modulation. The resulting averaged models are analysed theoretically and their exact stationary solutions are translated into time-periodic solutions through the averaging reduction. These are, in turn, compared with the exact periodic solutions of the full non-autonomous PT-symmetry managed problem and very good agreement is found between the two. (paper)

Ab-initio study of the coadsorption of Li and H on Pt(001), Pt(110) and Pt(111) surfaces

Energy Technology Data Exchange (ETDEWEB)

Saad, Farida [Laboratoire de Physique et Chimie Quantique, Faculte des Sciences, Universite Mouloud Mammeri, 15000 Tizi-Ouzou (Algeria); Zemirli, Mourad, E-mail: zemirlimourad@mail.ummto.dz [Laboratoire de Physique et Chimie Quantique, Faculte des Sciences, Universite Mouloud Mammeri, 15000 Tizi-Ouzou (Algeria); Benakki, Mouloud; Bouarab, Said [Laboratoire de Physique et Chimie Quantique, Faculte des Sciences, Universite Mouloud Mammeri, 15000 Tizi-Ouzou (Algeria)

2012-02-15

The coadsorption of Li and H atoms on Pt(001), Pt(110) and Pt(111) surfaces is studied using density functional theory with generalised gradient approximation. In all calculations Li, H and the two topmost layers of the metal were allowed to relax. At coverage of 0.25 mono-layer in a p(2 Multiplication-Sign 2) unit cell, lithium adsorption at the hollow site for the three surfaces is favoured over top and bridge sites. The most favoured adsorption sites for H atom on the Pt(001) and Pt(110) surfaces are the top and bridge sites, while on Pt(111) surface the fcc site appears to be slightly favoured over the hcp site. The coadsorption of Li and atomic hydrogen shows that the interaction between the two adsorbates is stabilising when they are far from each other. The analysis of Li, H and Pt local density of states shows that Li strongly interacts with the Pt surfaces.

Ethanol electrooxidation on Pt-Sn and Pt-Sn-W bulk alloys

Energy Technology Data Exchange (ETDEWEB)

Anjos, D.M. dos; Hahn, F.; Leger, J.M.; Kokoh, K.B. [Universite de Poitiers, Poitiers Cedex (France). Centre National de la Recherche Scientifique (CNRS). Equipe Electrocatalyse; Tremiliosi-Filho, G. [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica

2008-07-01

Ethanol oxidation has been studied on Pt-Sn and Pt-Sn-W electrodes prepared in an arc-melting furnace. Different electrochemical techniques like cyclic voltammetry and chronoamperometry were used to evaluate the catalytic activity of these materials. The electro-oxidation process was also investigated by in situ infrared reflectance spectroscopy in order to determine adsorbed intermediates and reaction products. Experimental results indicated that Pt-Sn and Pt-Sn-W alloys are able to oxidize ethanol mainly to acetaldehyde and acetic acid. Adsorbed CO was also detected, demonstrating the viability of splitting the C-C bond in the ethanol molecule during the oxidation process. The adsorbed CO was further oxidized to CO{sub 2}.This reaction product was clearly detected by SNIFTIRS. Pt-Sn-W catalyst showed a better electrochemical performance than Pt-Sn that, in it turn, is better than Pt-alone. (author)

Prothrombin 20210 G: a mutation and Factor V Leiden mutation in women with a history of severe preeclampsia and (H)ELLP syndrome

NARCIS (Netherlands)

van Pampus, M. G.; Wolf, H.; Koopman, M. M.; van den Ende, A.; Buller, H. R.; Reitsma, P. H.

2001-01-01

The 20210 G-A prothrombin gene variant and the Factor V Leiden mutation are mutations associated with venous thrombotic risk. The aim of our study was to assess the prevalence of these specific mutations in women with a history of preeclampsia or hemolysis elevated liver enzymes, and low platelet

Epitaxial growth of zigzag PtAu alloy surface on Au nano-pentagrams with enhanced Pt utilization and electrocatalytic performance toward ethanol oxidation reaction

International Nuclear Information System (INIS)

Du, Cheng; Gao, Xiaohui; Zhuang, Zhihua; Cheng, Chunfeng; Zheng, Fuqin; Li, Xiaokun; Chen, Wei

2017-01-01

Highlights: • PtAu nanoalloy surface is heteroepitaxially grown on the pre-synthesized Au nano-pentagrams. • The PtAu/Au nano-pentagrams exhibit excellent electrocatalytic activity for ethanol oxidation. • The charge transfer resistance of PtAu/Au is lower than that of commercial Pt/C. • The durability and anti-poisoning ability of PtAu/Au is much better than those of commercial Pt/C - Abstract: Improving Pt utilization is of fundamental importance for many significant processes in energy conversion, which is strongly dependent on the surface structure of used catalysts. Based on the traditional Pt-on-Au system which has been proved to be an ideal nanostructure for improving the catalytic activity and stability of Pt, and the recent follow-up studies on this system, we introduce here a new strategy for fabricating Pt surface with high-index facets over the Pt-on-Au system. To achieve this goal, we elaborately designed and fabricated a unique zigzag PtAu alloy nanosurface on Au nano-pentagrams (PtAu/Au NPs) through epitaxial growth of Pt along the high-index facets on the pre-synthesized Au nano-pentagrams. Owing to the surface electronic interaction between Au and Pt and the exposed high-index facets from the unique morphology of zigzag PtAu alloy nanosurface, the as-prepared PtAu/Au NPs exhibited excellent electrocatalytic performance toward ethanol oxidation reaction (EOR) in alkaline condition. The specific activity (8.3 mA cm"−"2) and mass activity (4.4 A mg"−"1) obtained from PtAu/Au NPs are about 5.2 and 5.5 times, respectively, higher than those from commercial Pt/C for EOR.

Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for CO Oxidation

Directory of Open Access Journals (Sweden)

Hongmei Qin

2015-04-01

Full Text Available Conventional supported Pt catalysts have often been prepared by loading Pt onto commercial supports, such as SiO2, TiO2, Al2O3, and carbon. These catalysts usually have simple metal-support (i.e., Pt-SiO2 interfaces. To tune the catalytic performance of supported Pt catalysts, it is desirable to modify the metal-support interfaces by incorporating an oxide additive into the catalyst formula. Here we prepared three series of metal oxide-modified Pt catalysts (i.e., Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3, where M = Al, Fe, Co, Cu, Zn, Ba, La for CO oxidation. Among them, Pt/CoOx/SiO2, Pt/CoOx/TiO2, and Pt/CoOx/Al2O3 showed the highest catalytic activities. Relevant samples were characterized by N2 adsorption-desorption, X-ray diffraction (XRD, transmission electron microscopy (TEM, H2 temperature-programmed reduction (H2-TPR, X-ray photoelectron spectroscopy (XPS, CO temperature-programmed desorption (CO-TPD, O2 temperature-programmed desorption (O2-TPD, and CO2 temperature-programmed desorption (CO2-TPD.

Prothrombin G20210A mutation is associated with young-onset stroke: the genetics of early-onset stroke study and meta-analysis.

Science.gov (United States)

Jiang, Baijia; Ryan, Kathleen A; Hamedani, Ali; Cheng, Yuching; Sparks, Mary J; Koontz, Deborah; Bean, Christopher J; Gallagher, Margaret; Hooper, W Craig; McArdle, Patrick F; O'Connell, Jeffrey R; Stine, O Colin; Wozniak, Marcella A; Stern, Barney J; Mitchell, Braxton D; Kittner, Steven J; Cole, John W

2014-04-01

Although the prothrombin G20210A mutation has been implicated as a risk factor for venous thrombosis, its role in arterial ischemic stroke is unclear, particularly among young adults. To address this issue, we examined the association between prothrombin G20210A and ischemic stroke in a white case-control population and additionally performed a meta-analysis. From the population-based Genetics of Early Onset Stroke (GEOS) study, we identified 397 individuals of European ancestry aged 15 to 49 years with first-ever ischemic stroke and 426 matched controls. Logistic regression was used to calculate odds ratios (ORs) in the entire population and for subgroups stratified by sex, age, oral contraceptive use, migraine, and smoking status. A meta-analysis of 17 case-control studies (n=2305 cases ischemic stroke did not achieve statistical significance (OR=2.5; 95% confidence interval [CI]=0.9-6.5; P=0.07). However, among adults aged 15 to 42 years (younger than median age), cases were significantly more likely than controls to have the mutation (OR=5.9; 95% CI=1.2-28.1; P=0.03), whereas adults aged 42 to 49 years were not (OR=1.4; 95% CI=0.4-5.1; P=0.94). In our meta-analysis, the mutation was associated with significantly increased stroke risk in adults ≤55 years (OR=1.4; 95% CI=1.1-1.9; P=0.02), with significance increasing with addition of the GEOS results (OR=1.5; 95% CI=1.1-2.0; P=0.005). The prothrombin G20210A mutation is associated with ischemic stroke in young adults and may have an even stronger association among those with earlier onset strokes. Our finding of a stronger association in the younger young adult population requires replication.

Exchange coupled CoPt/FePtC media for heat assisted magnetic recording

Science.gov (United States)

Dutta, Tanmay; Piramanayagam, S. N.; Ru, Tan Hui; Saifullah, M. S. M.; Bhatia, C. S.; Yang, Hyunsoo

2018-04-01

L10 FePtC granular media are being studied as potential future magnetic recording media and are set to be used in conjunction with heat assisted magnetic recording (HAMR) to enable recording at write fields within the range of current day recording heads. Media structures based on a FePtC storage layer and a capping layer can alleviate the switching field distribution (SFD) requirements of HAMR and reduce the noise originating from the writing process. However, the current designs suffer from SFD issues due to high temperature writing. To overcome this problem, we study a CoPt/FePtC exchange coupled composite structure, where FePtC serves as the storage layer and CoPt (with higher Curie temperature, Tc) as the capping layer. CoPt remains ferromagnetic at near Tc of FePtC. Consequently, the counter exchange energy from CoPt would reduce the noise resulting from the adjacent grain interactions during the writing process. CoPt/FePtC bilayer samples with different thicknesses of CoPt were investigated. Our studies found that CoPt forms a continuous layer at a thickness of 6 nm and leads to considerable reduction in the saturation field and its distribution.

Improving the stability and ethanol electro-oxidation activity of Pt catalysts by selectively anchoring Pt particles on carbon-nanotubes-supported-SnO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Li, J.J.; Wang, J.S.; Zhao, J.H.; Song, C.Y.; Wang, L.C. [School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou (China); Guo, X. [Department of Chemistry, Tsinghua University, Beijing (China)

2012-10-15

To improve the stability and activity of Pt catalysts for ethanol electro-oxidation, Pt nanoparticles were selectively deposited on carbon-nanotubes (CNTs)-supported-SnO{sub 2} to prepare Pt/SnO{sub 2}/CNTs and Pt/CNTs was prepared by impregnation method for reference study. X-ray diffraction (XRD) was used to confirm the crystalline structures of Pt/SnO{sub 2}/CNTs and Pt/CNTs. The stabilities of Pt/SnO{sub 2}/CNTs and Pt/CNTs were compared by analyzing the Pt size increase amplitude using transmission electron microscopy (TEM) images recorded before and after cyclic voltammetry (CV) sweeping. The results showed that the Pt size increase amplitude is evidently smaller for Pt/SnO{sub 2}/CNTs, indicating the higher stability of Pt/SnO{sub 2}/CNTs. Although both catalysts exhibit degradation of electrochemical active surface area (EAS) after CV sweeping, the EAS degradation for the former is lower, further confirming the higher stability of Pt/SnO{sub 2}/CNTs. CV and potentiostatic current-time curves were recorded for ethanol electro-oxidation on both catalysts before and after CV sweeping and the results showed that the mass specific activity of Pt/CNTs increases more than that of Pt/SnO{sub 2}/CNTs, indicating that Pt/CNTs experiences more severe evolution and is less stable. The calculated area specific activity of Pt/SnO{sub 2}/CNTs is larger than that of Pt/CNTs, indicating SnO{sub 2} can co-catalyze Pt due to plenty of interfaces between SnO{sub 2} and Pt. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Magnetic properties of nanocrystallized Fe-Pt-B melt-spun ribbons

International Nuclear Information System (INIS)

Yamamoto, Tokujiro; Omori, Akihiro; Kimura, Hisamichi; Inoue, Akihisa

2007-01-01

L1 0 FePt nanoparticles have been prepared by etching grain boundaries of heat-treated melt-spun Fe-19Pt-25B (at.%) alloy ribbons. It is revealed that an L1 0 FePt nanocrystalline phase is directly formed from the Fe-Pt-B amorphous ribbons by long-time heat treatment at low temperatures in the vicinity of 723 K. With increasing heat treatment time, dimensions of the nanocrystallized FePt grains increase, accompanied by a change from soft ferromagnetic to hard ferromagnetic. The ribbon crystallized at 723 K for 1.8 ks consists of only an FePt L1 0 phase and its coercivity is as low as 0.381 kA/m. However, it increases to 372 kA/m with increasing grain size of precipitated L1 0 phase to about 30 nm by heat treatment for 86.4 ks, while the saturation magnetic flux density remains constant at about 0.4 T. Etching boundaries in heat-treated ribbons has been performed to obtain ferromagnetic L1 0 FePt nanoparticles and several particles were observed by means of transmission electron microscopy

Relationship between the catalytic activity of Pt/alumina and the relaxation process of the photoexcited electrons

International Nuclear Information System (INIS)

Ito, Junji; Hanaki, Yasunari; Shen, Qing; Toyoda, Taro

2012-01-01

Highlights: ► We determined the decay time of photoexcited electrons of Pt/Al 2 O 3 . ► Faster decay of excited electrons in Pt/Al 2 O 3 leads to its faster oxidation rate. ► Decreasing excited electron lifetime in Pt/Al 2 O 3 may decrease Pt consumption in catalytic convertors. - Abstract: In order to decrease the consumption of precious metals used in the catalytic converters used in automobiles, we studied the relationship between the catalytic activity of Pt/alumina (Pt/Al 2 O 3 ) and the relaxation process of photoexcited electrons. Firstly, we studied the relationship between the size of the Pt particles in Pt/Al 2 O 3 and catalytic performance. Secondly, the relationship between the size of the Pt particles in Pt/Al 2 O 3 and the decay time of the excited electrons was studied using an improved transient grating (TG) technique. The results showed that faster decay of the excited electrons leads to greater oxidation rates. The decay time obtained with the improved TG technique gives an indication of the time that the exited electrons take to return to the ground state. According to studies utilizing FT-IR, one of the processes necessary for quickly generating CO 2 with Pt is that the electron in the Pt-O bond moves to the Pt side and that the Pt + becomes Pt metal. Thus, the decay time obtained with the improved TG technique corresponds to the process whereby Pt + returns to Pt metal. Thus, we found that the consumption of precious metals can be reduced by increasing the speed of the decay of the excited electrons.

Nitrogen Doped Graphene Supported Pt Nanoflowers as Electrocatalysts for Oxidation of Formaldehyde.

Science.gov (United States)

Xie, Aijuan; Zhou, Wenting; Luo, Shiping; Chen, Yu; Zhou, Xiaoqing; Chao, Yao

2017-02-01

A facile Pt nanoflowers/nitrogen-doped graphene (PtNFs/NG) electrocatalyst was prepared via depositing Pt nanoflowers (PtNFs) onto the nitrogen-doped graphene (NG) matrix with urea as the nitrogen source and PtNFs/NG modified glassy carbon electrode (GCE) was prepared by electro-chemical method. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscope, X-ray photoelectron spectroscopy (XPS) and Scanning electron microscope (SEM) were used to characterize the resulting composites. Also oxidation of formaldehyde on the resulting PtNFs/NG modified electrode was investigated. The influence of deposition time, electrodeposition potential and formaldehyde concentration on electrooxidation of formaldehyde was detected, the experimental results indicate the high performance of PtNFs/NG catalyst for formaldehyde oxidation is at electrodeposition time of 300 s with the applied potential of −0.3 V. Electrochemical process, electrocatalytic stability and chronoamperometry were also inspected, it was indicated that formalde-hyde oxidation reaction on the PtNFs/NG electrode is diffusion-controlled and PtNFs/NG exhibits a high catalytic activity, stability as well as excellent poisoning-tolerance towards formaldehyde oxidation, which is attributed to the synergistic effect of PtNFs and NG. It turns out that PtNFs/NG can be used in direct liquid-feed fuel cells as a promising alternative catalyst.

Energy scavenging based on a single-crystal PMN-PT nanobelt

Science.gov (United States)

Wu, Fan; Cai, Wei; Yeh, Yao-Wen; Xu, Shiyou; Yao, Nan

2016-03-01

Self-powered nanodevices scavenging mechanical energy require piezoelectric nanostructures with high piezoelectric coefficients. Here we report the fabrication of a single-crystal (1 - x)Pb(Mg1/3Nb2/3)O3 - xPbTiO3 (PMN-PT) nanobelt with a superior piezoelectric constant (d33 = ~550 pm/V), which is approximately ~150%, 430%, and 2100% of the largest reported values for previous PMN-PT, PZT and ZnO nanostructures, respectively. The high d33 of the single-crystalline PMN-PT nanobelt results from the precise orientation control during its fabrication. As a demonstration of its application in energy scavenging, a piezoelectric nanogenerator (PNG) is built on the single PMN-PT nanobelt, generating a maximum output voltage of ~1.2 V. This value is ~4 times higher than that of a single-CdTe PNG, ~13 times higher than that of a single-ZnSnO3 PNG, and ~26 times higher than that of a single-ZnO PNG. The profoundly increased output voltage of a lateral PNG built on a single PMN-PT nanobelt demonstrates the potential application of PMN-PT nanostructures in energy harvesting, thus enriching the material choices for PNGs.

Cerebral Venous Thrombosis and Pulmonary Embolism with Prothrombin G20210A Gene Mutation.

Science.gov (United States)

Dagli, Canan Eren; Koksal, Nurhan; Guler, Selma; Gelen, Mehmet Emin; Atilla, Nurhan; Tuncel, Deniz

2010-04-01

A 25-year-old man presented with symptoms of syncope, cough, headache and hemoptysis. Cranial MR and venography showed thrombus formation in the right transverse sinus and superior sagittal sinus. Computed tomographic pulmonary angiography (CTPA) showed an embolic thrombus in the right pulmonary truncus and lung abscess. The patient was young, and there were no signs of lower extremity deep venous thrombosis or other major risk factors for pulmonary embolism (PE) including cardiac anomaly. The only risk factor we were able to identify was the presence of the prothrombin G20210A gene mutation. Anticoagulant treatment with oral warfarin (10 mg daily) and imipenem (4X500 mg) was started. The patient was hospitalized for antibiotic and anticoagulation therapies for three weeks and was discharged on lifelong treatment with warfarin (5 mg daily).

Pt Skin Versus Pt Skeleton Structures of Pt₃Sc as Electrocatalysts for Oxygen Reduction

DEFF Research Database (Denmark)

Johansson, Tobias Peter; Ulrikkeholm, Elisabeth Therese; Hernandez-Fernandez, Patricia

2014-01-01

. The development of new materials for this reaction is essential in order to increase the overall effeciency of the fuel cell. Herein, we study the effect of ultra high vacuum annealing on the structure and activity of polycrystalline Pt3Sc. Upon annealing in ultra high vacuum a Pt overlayer is formed......, relative to Pt(111), consistent with the CO adsorption energies calculated using density functional theory calculations. Exposing the annealed Pt3Sc sample to 200 mbar O2 at room temperature results in similar to 14 % Sc oxide as measured by X-ray photoelectron spectroscopy. Electrochemical testing...

Carbon supported nanoparticles Pt Ru (Pt Ru/C electrocatalysts) prepared using electron beam irradiation; Preparacao de nanoparticulas de PtRu suportadas em carbono (eletrocatalisadores PtRu/C) utilizando feixe de eletrons

Energy Technology Data Exchange (ETDEWEB)

Silva, Dionisio F. da; Oliveira Neto, Almir; Pino, Eddy S.; Linardi, Marcelo; Spinace, Estevam V. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Programa de Celulas a Combustivel], e-mail: espinace@ipen.br, e-mail: dfsilva@ipen.br

2006-07-01

Carbon-supported Pt Ru (electrocatalysts PtRu/C nanoparticles) were prepared submitting a water/ethylene glycol mixture containing Pt(IV) and Ru(III) ions and the carbon support to electron beam irradiation. The PtRu/C electrocatalysts were characterized by EDX, XRD and cyclic voltammetry and tested for methanol electro-oxidation aiming fuel cell application. The obtained PtRu/C electrocatalysts were more active for methanol electro-oxidation than the commercial PtRu/C ETEK electrocatalyst at ambient temperature. (author)

Remarks on the PT-pseudo-norm in PT-symmetric quantum mechanics

Energy Technology Data Exchange (ETDEWEB)

Duc Tai Trinh [Department of Mathematics, Teacher Training College of Dalat, 29 Yersin, Dalat (Viet Nam)]|[Abdus Salam International Centre for Theoretical Physics, Strada Costiera 11, Trieste 34014 (Italy)

2005-04-22

This paper presents an underlying analytical relationship between the PT-pseudo-norm associated with the PT-symmetric Hamiltonian H = p{sup 2} + V(q) and the Stokes multiplier of the differential equation corresponding to this Hamiltonian. We show that the sign alternation of the PT-pseudo-norm, which has been observed as a generic feature of the PT-inner product, is essentially controlled by the derivative of a Stokes multiplier with respect to the eigenparameter.

Relationship between the catalytic activity of Pt/alumina and the relaxation process of the photoexcited electrons

Energy Technology Data Exchange (ETDEWEB)

Ito, Junji, E-mail: j-itou@mail.nissan.co.jp [Advanced Materials Laboratory, Nissan Research Center, NISSAN MOTOR CO., LTD., 1 Natsushima-cho, Yokosuka-shi, Kanagawa 237-8523 (Japan); Department of Applied Physics and Chemistry, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo 182-8585 (Japan); Hanaki, Yasunari [Advanced Materials Laboratory, Nissan Research Center, NISSAN MOTOR CO., LTD., 1 Natsushima-cho, Yokosuka-shi, Kanagawa 237-8523 (Japan); Shen, Qing [Department of Applied Physics and Chemistry, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo 182-8585 (Japan); Department of Engineering Science, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo 182-8585 (Japan); PRESTO, Japan Science and Technology Agency (JST), 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan); Toyoda, Taro [Department of Applied Physics and Chemistry, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo 182-8585 (Japan); Department of Engineering Science, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo 182-8585 (Japan)

2012-12-15

Highlights: Black-Right-Pointing-Pointer We determined the decay time of photoexcited electrons of Pt/Al{sub 2}O{sub 3}. Black-Right-Pointing-Pointer Faster decay of excited electrons in Pt/Al{sub 2}O{sub 3} leads to its faster oxidation rate. Black-Right-Pointing-Pointer Decreasing excited electron lifetime in Pt/Al{sub 2}O{sub 3} may decrease Pt consumption in catalytic convertors. - Abstract: In order to decrease the consumption of precious metals used in the catalytic converters used in automobiles, we studied the relationship between the catalytic activity of Pt/alumina (Pt/Al{sub 2}O{sub 3}) and the relaxation process of photoexcited electrons. Firstly, we studied the relationship between the size of the Pt particles in Pt/Al{sub 2}O{sub 3} and catalytic performance. Secondly, the relationship between the size of the Pt particles in Pt/Al{sub 2}O{sub 3} and the decay time of the excited electrons was studied using an improved transient grating (TG) technique. The results showed that faster decay of the excited electrons leads to greater oxidation rates. The decay time obtained with the improved TG technique gives an indication of the time that the exited electrons take to return to the ground state. According to studies utilizing FT-IR, one of the processes necessary for quickly generating CO{sub 2} with Pt is that the electron in the Pt-O bond moves to the Pt side and that the Pt{sup +} becomes Pt metal. Thus, the decay time obtained with the improved TG technique corresponds to the process whereby Pt{sup +} returns to Pt metal. Thus, we found that the consumption of precious metals can be reduced by increasing the speed of the decay of the excited electrons.

A novel binary Pt 3Te x/C nanocatalyst for ethanol electro-oxidation

Science.gov (United States)

Huang, Meihua; Wang, Fei; Li, Lirong; Guo, Yonglang

The Pt 3Te x/C nanocatalyst was prepared and its catalytic performance for ethanol oxidation was investigated for the first time. The Pt 3Te/C nanoparticles were characterized by an X-ray diffractometer (XRD), transmission electron microscope (TEM) and energy dispersive X-ray spectroscopy equipped with TEM (TEM-EDX). The Pt 3Te/C catalyst has a typical fcc structure of platinum alloys with the presence of Te. Its particle size is about 2.8 nm. Among the synthesized catalysts with different atomic ratios, the Pt 3Te/C catalyst has the highest anodic peak current density. The cyclic voltammograms (CV) show that the anodic peak current density for the Pt 3Te/C, commercial PtRu/C and Pt/C catalysts reaches 1002, 832 and 533 A g -1, respectively. On the current-time curve, the anodic current on the Pt 3Te/C catalyst was higher than those for the catalysts reported. So, these findings show that the Pt 3Te/C catalyst has uniform nanoparticles and the best activity among the synthesized catalysts, and it is better than commercial PtRu/C and Pt/C catalysts for ethanol oxidation at room temperature.

Subclinical haemorrhagic tendency exists in patients with β-thalassaemia major in early childhood

Directory of Open Access Journals (Sweden)

Abhishek Maiti

2012-02-01

Full Text Available BackgroundAlterations of coagulation profile have been reported in patients with β-thalassaemia major (β-TM.MethodTo investigate this in the paediatric population, we studied haemostatic parameters in pre-transfusion blood samples from 50 non-splenectomised transfusion-dependent children with β-TM (mean age 6±2.5 years and in blood from 25 healthy controls.ResultsLaboratory evaluation showed thrombocytopenia in 40%, prolongation of prothrombin time (PT in 12% and prolongation of activated partial thromboplastin time (APTT in 6% of the patients. Mean values for PT, APTT and platelet count (PC were all raised in the patient population compared with the controls. The alteration of coagulation status was significant for PT (p value 0.05. No significant liner correlation could be identified between PT, APTT, PC of the patients and interval between transfusions (in days or days since last transfusion.ConclusionThe findings from this study suggest that a subclinical haemorrhagic tendency exists in patients with β-TM at a very early age. The intrinsic pathway appears to be more affected than the extrinsic pathway.

Prothrombin and risk of venous thromboembolism, ischemic heart disease and ischemic cerebrovascular disease in the general population

DEFF Research Database (Denmark)

Weischer, Maren; Juul, Klaus; Zacho, Jeppe

2010-01-01

OBJECTIVE: We tested the hypotheses that Prothrombin G20210A heterozygosity associate with increased risk of venous thromboembolism (VTE), ischemic heart disease (IHD), and ischemic cerebrovascular disease (ICVD) in the general population and re-tested risk of IHD and ICVD in two case......-control studies. METHODS: 9231 individuals from the Danish general population were followed for VTE (VTE=DVT+PE), deep venous thrombosis (DVT), pulmonary embolism (PE), IHD, myocardial infarction (MI), ICVD, and ischemic stroke (IS) for a median of 24 years. Case-control studies included 2461 IHD cases and 867...

Single-Crystalline cooperite (PtS): Crystal-Chemical characterization, ESR spectroscopy, and {sup 195}Pt NMR spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Rozhdestvina, V. I., E-mail: veronika@ascnet.ru; Ivanov, A. V.; Zaremba, M. A. [Far East Division, Russian Academy of Sciences, Institute of Geology and Nature Management (Russian Federation); Antsutkin, O. N.; Forsling, W. [Lulea University of Technology (Sweden)

2008-05-15

Single-crystalline cooperite (PtS) with a nearly stoichiometric composition was characterized in detail by X-ray diffraction, electron-probe X-ray microanalysis, and high-resolution scanning electron microscopy. For the first time it was demonstrated that {sup 195}Pt static and MAS NMR spectroscopy can be used for studying natural platinum minerals. The {sup 195}Pt chemical-shift tensor of cooperite was found to be consistent with the axial symmetry and is characterized by the following principal values: {delta}{sub xx} = -5920 ppm, {delta}{sub yy} = -3734 ppm, {delta}{sub zz} = +4023 ppm, and {delta}{sub iso} = -1850 ppm. According to the ESR data, the samples of cooperite contain copper(II), which is adsorbed on the surface during the layer-by-layer crystal growth and is not involved in the crystal lattice.

Nano-Pt/C electrocatalysts: synthesis and activity for alcohol oxidation

International Nuclear Information System (INIS)

Huong Nguyen, Thi Giang; Anh Pham, Thi Van; Phuong, Thi Xuan; Binh Lam, Thi Xuan; Tran, Van Man; Thoa Nguyen, Thi Phuong

2013-01-01

Nano-sized platinum electrocatalysts on a carbon support (Pt/C) have been synthesized by the polyol reduction method under microwave irradiation using ethylene glycol (EG) as the reductant and carbon vulcan XC-72R as the support material. The physical characteristics of the Pt/C materials were analyzed using transmission electron microscopy and Brunauer–Emmet–Teller nitrogen adsorption theory. The glycerol and EG electro-oxidation in alkaline media on the Pt/C catalysts was investigated with cyclic voltammetry and chronoamperometry. The particle size of Pt on carbon was about 3.0 nm. The catalytic activity for the alcohol electro-oxidation of Pt/C materials synthesized in various pH values (7.9–9.5) was found to be significantly higher than that of commercial Pt/C (Aldrich Sigma, 10 wt% Pt/activated carbon). The Pt/C catalyst synthesized in pH 9.5 showed the best electrochemical behavior. At all the synthesized Pt/C electrodes, compared with glycerol, the oxidation rate of EG was about ten times higher. (paper)

Spontaneous deposition of Ru on Pt (100: morphological and electrochemical studies. Preliminary results of ethanol oxidation at Pt(100/Ru

Directory of Open Access Journals (Sweden)

Colle Vinicius D.

2003-01-01

Full Text Available In the present work ruthenium was deposited in submonolayer amounts on Pt(100 by spontaneous deposition at several deposition times. The Pt (100/Ru surfaces were analyzed using ex-situ STM to image the deposits characteristic of ruthenium on Pt (100. It was observed the formation of ruthenium islands with diameters between 1.0 and 4.5 nm with bi-atomic thickness in the center of the islands. A homogeneous distribution of the ruthenium islands on the platinum terraces was found, with no preferential deposition on steps or surface defect sites. The ruthenium coverage degree had been calculated by the decrease of charge of the hydrogen adsorption-desorption peaks in the cyclic voltammograms of the Pt(100/Ru electrodes. The Pt(100/Ru electrodes with a ruthenium coverage degree of ca. 0.3 showed a high activity for the ethanol electrooxidation. The electrochemical experimental results support strongly the bifunctional mechanism for the enhanced ethanol oxidation.

A PK-PD model-based assessment of sugammadex effects on coagulation parameters.

Science.gov (United States)

Bosch, Rolien; van Lierop, Marie-José; de Kam, Pieter-Jan; Kruithof, Annelieke C; Burggraaf, Jacobus; de Greef, Rik; Visser, Sandra A G; Johnson-Levonas, Amy O; Kleijn, Huub-Jan

2016-03-10

Exposure-response analyses of sugammadex on activated partial thromboplastin time (APTT) and prothrombin time international normalized ratio (PT(INR)) were performed using data from two clinical trials in which subjects were co-treated with anti-coagulants, providing a framework to predict these responses in surgical patients on thromboprophylactic doses of low molecular weight or unfractionated heparin. Sugammadex-mediated increases in APTT and PT(INR) were described with a direct effect model, and this relationship was similar in the presence or absence of anti-coagulant therapy in either healthy volunteers or surgical patients. In surgical patients on thromboprophylactic therapy, model-based predictions showed 13.1% and 22.3% increases in respectively APTT and PT(INR) within 30min after administration of 16mg/kg sugammadex. These increases remain below thresholds seen following treatment with standard anti-coagulant therapy and were predicted to be short-lived paralleling the rapid decline in sugammadex plasma concentrations. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Sonochemical synthesis and characterization of Pt/CNT, Pt/TiO2, and Pt/CNT/TiO2 electrocatalysts for methanol electro-oxidation

International Nuclear Information System (INIS)

Bedolla-Valdez, Z.I.; Verde-Gómez, Y.; Valenzuela-Muñiz, A.M.; Gochi-Ponce, Y.; Oropeza-Guzmán, M.T.; Berhault, Gilles; Alonso-Núñez, G.

2015-01-01

Highlights: • Pt/CNT/TiO 2 electrocatalyst was successfully prepared by the sonochemical method. • The electrocatalyst Pt/CNT/TiO 2 was synthesized without heat treatments, additives or surfactants. • The TiO 2 -Pt interaction improves the CO-tolerance of Pt/CNT/TiO 2 , as well as the electrocatalyst stability. • Low amount of multi-walled carbon nanotubes increases the current density of Pt/CNT/TiO 2 significantly compared to Pt/TiO 2 . - Abstract: Pt electrocatalyst supported on composite formed of multi-walled carbon nanotubes and titanium oxide (CNT/TiO 2 ) was successfully synthesized by a sonochemical method without heat treatments, surfactants or additives. This electrocatalyst could be used for direct methanol fuel cells (DMFC) applications. For comparison, Pt/CNT and Pt/TiO 2 electrocatalysts were prepared as reference samples. Structural properties and morphology of the synthesized materials were examined by X-ray diffraction, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and their specific surface areas were determined by the Brunauer-Emmett-Teller method. The Pt and acid-treated CNT contents were analyzed by inductively coupled plasma atomic emission spectroscopy and thermogravimetric analysis, respectively. The electrochemical properties of the synthesized electrocatalysts were evaluated by cyclic voltammetry (CV) and chronoamperometry in a three-electrode cell at room temperature. The evaluation performed using electrochemical techniques suggests that TiO 2 promotes the CO-tolerance due to TiO 2 -Pt interaction. The CV tests demonstrated that 6 wt.% of acid-treated CNT increases significantly the current density when Pt selectively interacts with TiO 2 .

Pengukuran Kepuasan Kerja Karyawan APLP & A PT Semen Padang (PT X

Directory of Open Access Journals (Sweden)

Shelly Nolandari

2016-04-01

Full Text Available Thoughts on employee satisfaction arise because the company believes its employees have a high level of satisfaction will result in a better level of productivity, work more accurate, the fewer the number of absences and higher loyalty than employees with low satisfaction levels.Company's with good productivity will grow and increase revenue. PT Semen Padang has several subsidiaries and affiliates like PT X. PT X will measure employee satisfaction with the company's expectations are always making changes that sustainable about employee satisfaction because companies believe that employee satisfaction level of its high yield levels better productivity, work more accurate, the number of absences are fewer and loyalty higher than employees with low satisfaction levels. Companies with good productivity will experience growth as indicated by the increase in revenue, in line with the increase in the welfare of the employees. PT Semen Padang has several subsidiaries and affiliates PT X. PT Xwill measure employee satisfaction with the Company's expectations.

Evaluasi Shift Kerja dan Penentuan Waktu Standar PT X Berdasarkan Beban Kerja

Directory of Open Access Journals (Sweden)

Trisna Mesra

2016-04-01

Full Text Available PT. X is one of the companies located in Dumai Industrial Region, produces fertilizer. This company has three production plants. The production capacity of the first plant is 450 tons/day, the second plant produces 750 tons/day and the third plant produces 700 tons/day.  PT. X is supported by 2 sub companies, they are PT. A and PT. B. PT. A operates 5 bagging lines and PT. B operates 3 bagging lines. The fertilizer bagging process has three steps where each step has its own work station: putting the labeled sack to the hook followed by filling the sack with fertilizer, installing the tie cable, and sewing the fertilizer filled sack. From the initial survey, it was found that the processing time is not optimal to reach production target. PT. A and B have to set 24 working hours per day to run the target resulting on frequent over time, excessive fatigue and the negative impact of physically and mentally for the workers. Author’s hypothesis is the current condition has been one of the reasons for a decline of the production output. Therefore, the purposes of the research are to find the impact of current working hours and shift work pattern on the physical and psychological response of the workers and to calculate the standard time required to complete one cycle of bagging process. This standard time is very crucial to determine production target thus determine the optimal working hours and shift rotation. Measuring of heart rate are collecting results of a questionnaire of NASA-TLX are the parameters used to evaluate the physical and psychological response of workers. Two workers from different group worker, different shift work, from PT. A and PT. B were selected as samples to evaluate their heart rate pattern. The questioner spread out to all workers. Time standard was determined by observing and taking data of   40 bagging cycles for each shift work. The results show that shift work affecting the physiological response of workers in PT. B

Pt, PtCo and PtNi electrocatalysts prepared with mechanical alloying for oxygen reduction reaction in alkaline medium; Electrocatalizadores de Pt, PtCo y PtNi preparados por aleado mecanico para la reaccion de reduccion de oxigeno en medio alcalino

Energy Technology Data Exchange (ETDEWEB)

Garcia-Contreras, M.A.; Fernandez-Valverde, S.M. [Instituto Nacional de Investigaciones Nucleares, Ocoyoacac, Estado de Mexico (Mexico)]. E-mail: miguel.garcia@inin.gob.mx; Vargas-Garcia, J.R. [ESIQIE-IPN, Mexico D.F. (Mexico

2009-09-15

Pt, PtCo and PtNi electrocatalysts were prepared using mechanical alloying and their electrocatalytic activity was investigated for oxygen reduction reaction (ORR) in KOH 0.5 M using cyclic voltametry and rotary disc electrode (RDE) techniques. The electrocatalysts were characterized using x-ray diffraction, sweep electron microscopy, dispersive x-ray transmission and chemical analysis. The physical characterization indicated that all the electrocatalysts are alloys formed by agglomerated particles composed of nanocrystals. The chemical analysis showed the presence of iron in the alloys. For the electrocatalytic evaluation, polarization curves and Koutecky-Levich and Tafel graphs were obtained to determine the kinetic parameters of the electrocatalysts in the study. With the same experimental conditions, the PtCo presented better electrocatalytic performance with a higher exchange current density. [Spanish] Se prepararon electrocatalizadores de Pt, PtCo y PtNi por aleado mecanico y se investigo su actividad electrocatalitica para la reaccion de reduccion de oxigeno (RRO) en KOH 0.5 M utilizando las tecnicas de Voltametria ciclica y Electrodo de Disco Rotatorio. Los electrocatalizadores se caracterizaron por difraccion de rayos X, Microscopia electronica de Barrido, de Transmision y analisis quimico por dispersion de rayos X. La caracterizacion fisica indico que todos los electrocatalizadores son aleaciones formadas de particulas aglomeradas, compuestas de nanocristales. El analisis quimico mostro la presencia de hierro en las aleaciones. Para la evaluacion electrocatalitica se obtuvieron curvas de polarizacion, graficas de Koutecky-Levich y de Tafel para determinar los parametros cineticos de los electrocatalizadores en estudio. En las mismas condiciones experimentales, el PtCo presento el mejor desempeno electrocatalitico con la densidad de corriente de intercambio mas alta.

Coagulation Tests and Selected Biochemical Analytes in Dairy Cows with Hepatic Lipidosis

Directory of Open Access Journals (Sweden)

S. Padilla-Arellanes

2007-01-01

Full Text Available The aim of this study was to determine the values and changes in conventional and optimised clotting tests, as well as in selected biochemical analytes during hepatic lipidosis in postpartum dairy cows. Ten healthy and ten Holstein cows with hepatic lipidosis were selected based upon clinical history, clinical examination, liver biopsy, flotation test and histological analysis of hepatic tissue. Prothrombin time (PT and partial thromboplastin time (PTT were determined in non-diluted and diluted blood plasma samples. Clotting times determined in diluted plasma samples were prolonged in cows with hepatic lipidosis and there was a difference in the PT value at both 50% and 25% plasma dilutions between both groups of animals (P = 0.004 and P = 0.001. Significant differences between healthy animals and cows with hepatic lipidosis were observed in blood serum values for free fatty acids (FFA, aspartate aminotransferase (AST and triacyglycerols (P = 0.001, P = 0.007 and P = 0.044, respectively. FFA and liver biopsy are better diagnostic indicators for hepatic lipidosis than coagulation tests. The optimised PT is prolonged in cows with hepatic lipidosis and can detect this alteration that cannot be appreciated using conventional PT test.

PT AND PT/NI "NEEDLE" ELETROCATALYSTS ON CARBON NANOTUBES WITH HIGH ACTIVITY FOR THE ORR

Energy Technology Data Exchange (ETDEWEB)

Colon-Mercado, H.

2011-11-10

Platinum and platinum/nickel alloy electrocatalysts supported on graphitized (gCNT) or nitrogen doped carbon nanotubes (nCNT) are prepared and characterized. Pt deposition onto carbon nanotubes results in Pt 'needle' formations that are 3.5 nm in diameter and {approx}100 nm in length. Subsequent Ni deposition and heat treatment results in PtNi 'needles' with an increased diameter. All Pt and Pt/Ni materials were tested as electrocatalysts for the oxygen reduction reaction (ORR). The Pt and Pt/Ni catalysts showed excellent performance for the ORR, with the heat treated PtNi/gCNT (1.06 mA/cm{sup 2}) and PtNi/nCNT (0.664 mA/cm{sup 2}) showing the highest activity.

Reformulation of Business Strategies for Increasing Sales of TIN Product Stabilizer at PT Timah Industri

OpenAIRE

Sundoyo, Hadi; Hamsal, Mohammad

2013-01-01

PT. Timah Industri (PT TI) is a subsidiary of PT. Timah (Persero) Tbk which exploit comparative advantage of its parent company as the second largest tin producer in the world. With these advantages PT TI entered the downstream PVC stabilizer tin base. Starting from the difficulty of selling their products and then raised the question in inventory management. PT TI should immediately take strategic steps to save the tin chemical business continues to lose money from time to time. From the res...

Size effect on L10 ordering and magnetic properties of chemically synthesized FePt and FePtAu nanoparticles

Science.gov (United States)

Jia, Zhiyong; Kang, Shishou; Shi, Shifan; Nikles, David E.; Harrell, J. W.

2005-05-01

There is growing evidence that FePt nanoparticles become increasingly difficult to chemically order as the size approaches a few nanometers. We have studied the chemical ordering of FePt and FePtAu nanoparticle arrays as a function of particle size. Monodisperse Fe49Pt51 and Fe48Pt44Au8 nanoparticles with a size about 6nm were synthesized by the simultaneous decomposition of iron pentacarbonyl and reduction of platinum acetylacetonate and gold (III) acetate in a mixture of phenyl ether and hexadecylamine (HDA), with 1-adamantanecarboxylic acid and HDA as stabilizers. The nanoparticles were dispersed in toluene, films of the particles were cast onto silicon wafers from the dispersion, and the films were annealed in a tube furnace with flowing Ar +5%H2. The magnetic anisotropy and switching volumes were determined from time- and temperature-dependent coercivity measurements. By comparing with 3-nm FePt and FePtAu nanoparticles of comparable composition, the phase transformation is easier for the larger particles. Under the same annealing conditions, the larger particles have higher anisotropy and order parameter. Additive Au is very effective in enhancing the chemical ordering in both small and large particles, with x-ray diffraction superlattice peaks appearing after annealing at 350°C. Dynamic remnant coercivity measurements and magnetic switching volumes suggest particle aggregation at the higher annealing temperatures in both small and large particles.

Electrochemical quartz crystal microbalance analysis of the oxygen reduction reaction on Pt-based electrodes. Part 2: adsorption of oxygen species and ClO4(-) anions on Pt and Pt-Co alloy in HClO4 solutions.

Science.gov (United States)

Omura, J; Yano, H; Tryk, D A; Watanabe, M; Uchida, H

2014-01-14

To gain deeper insight into the role of adsorbed oxygenated species in the O2 reduction reaction (ORR) kinetics on platinum and platinum-cobalt alloys for fuel cells, we carried out a series of measurements with the electrochemical quartz crystal microbalance (EQCM) and the rotating disk electrode (RDE) in acid solution. The effects of anion adsorption on the activities for the ORR were first assessed in HClO4 and HF electrolyte solutions at various concentrations. In our previous work (Part 1), we reported that the perchlorate anion adsorbs specifically on bulk-Pt, with a Frumkin-Temkin isotherm, that is, a linear relationship between Δm and log[HClO4]. Here, we find that the specific adsorption on the Pt-skin/Pt3Co alloy was significantly stronger than that on bulk-Pt, in line with its modified electronic properties. The kinetically controlled current density j(k) for the O2 reduction at the Pt-skin/Pt3Co-RDE was about 9 times larger than that of the bulk-Pt-RDE in 0.01 M HClO4 saturated with air, but the j(k) values on Pt-skin/Pt3Co decreased with increasing [HClO4] more steeply than in the case of Pt, due to the blocking of the active sites by the specifically adsorbed ClO4(-). We have detected reversible mass changes for one or more adsorbed oxygen-containing species (Ox = O2, O, OH, H2O) on the Pt-skin/Pt3Co-EQCM and Pt-EQCM in O2-saturated and He-purged 0.01 M HClO4 solutions, in which the specific adsorption of ClO4(-) anions was negligible. The coverages of oxygen species θ(Ox) on the Pt-skin/Pt3Co in the potential range from 0.86 to 0.96 V in the O2-saturated solution were found to be larger than those on pure Pt, providing strong evidence that the higher O2 reduction activity on the Pt3Co is correlated with higher θ(Ox), contrary to the conventional view.

Shape-dependent surface magnetism of Co-Pt and Fe-Pt nanoparticles from first principles

Science.gov (United States)

Liu, Zhenyu; Wang, Guofeng

2017-12-01

In this paper, we have performed the first-principles density functional theory calculations to predict the magnetic properties of the CoPt and FePt nanoparticles in cuboctahedral, decahedral, and icosahedral shapes. The modeled alloy nanoparticles have a diameter of 1.1 nm and consist of 31 5 d Pt atoms and 24 3 d Co (or Fe) atoms. For both CoPt and FePt, we found that the decahedral nanoparticles had appreciably lower surface magnetic moments than the cuboctahedral and icosahedral nanoparticles. Our analysis indicated that this reduction in the surface magnetism was related to a large contraction of atomic spacing and high local Co (or Fe) concentration in the surface of the decahedral nanoparticles. More interestingly, we predicted that the CoPt and FePt cuboctahedral nanoparticles exhibited dramatically different surface spin structures when noncollinear magnetism was taken into account. Our calculation results revealed that surface anisotropy energy decided the fashion of surface spin canting in the CoPt and FePt nanoparticles, confirming previous predictions from atomistic Monte Carlo simulations.

Methanol oxidation catalysis and substructure of PtRu bimetallic nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Nitani, Hiroaki; Nakagawa, Takashi; Ono, Takahiro; Honda, Yusuke; Koizumi, Akiko; Seino, Satoshi; Yamamoto, Takao A. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan); Daimon, Hideo; Kurobe, Yukiko [Development and Technology Division, Hitachi Maxell Ltd., 6-20-1 Kinunodai, Tsukubamirai, Ibaraki 300-2496 (Japan)

2007-07-15

Catalytic material of PtRu nanoparticles supported on carbon (PtRu/C) for direct methanol fuel cells was synthesized by a polyol reduction method. Addition of phosphorus was effective for downsizing PtRu particles and improving their catalytic activity. The activity obtained was six times of that of a commercial catalysis. The samples were analyzed by techniques of X-ray absorption fine structure (XAFS) at Pt L{sub III}-edge and Ru K-edge, transmission electron microscope (TEM), X-ray diffraction (XRD) and X-ray fluorescence (XRF). These results indicated a core-shell structure consisting of a Pt-rich core and Ru-rich shell. By examining coordination numbers determined by XAFS analysis, we found a clear correlation between the catalytic activity and the Pt-Ru atomic pair frequency occurring on the particle surface, which supports the 'bi-functional mechanism'. (author)

Single Pt Atoms Confined into a Metal-Organic Framework for Efficient Photocatalysis.

Science.gov (United States)

Fang, Xinzuo; Shang, Qichao; Wang, Yu; Jiao, Long; Yao, Tao; Li, Yafei; Zhang, Qun; Luo, Yi; Jiang, Hai-Long

2018-02-01

It is highly desirable yet remains challenging to improve the dispersion and usage of noble metal cocatalysts, beneficial to charge transfer in photocatalysis. Herein, for the first time, single Pt atoms are successfully confined into a metal-organic framework (MOF), in which electrons transfer from the MOF photosensitizer to the Pt acceptor for hydrogen production by water splitting under visible-light irradiation. Remarkably, the single Pt atoms exhibit a superb activity, giving a turnover frequency of 35 h -1 , ≈30 times that of Pt nanoparticles stabilized by the same MOF. Ultrafast transient absorption spectroscopy further unveils that the single Pt atoms confined into the MOF provide highly efficient electron transfer channels and density functional theory calculations indicate that the introduction of single Pt atoms into the MOF improves the hydrogen binding energy, thus greatly boosting the photocatalytic H 2 production activity. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluating densification of blended elemental (BE) TiPt through pressureless sintering

CSIR Research Space (South Africa)

Gxowa, Zizo

2017-10-01

Full Text Available , Lihua Non- Ferrous Metals Co.,Ltd. - Pt (-250µm) powder supplied by Anglo American- Platinum. 11 Experimental procedure Ti (19.73%) Pt (80.30%) BE TiPt Blending Cold (i.e. ambient temp) compaction Sintering: Temp = 1300 & 1400ºC Time = 6,12 & 24 hrs... on BE TiPt for comparison. • Development of homogenisation model. 21 Acknowledgements • The CSIR • The DST • Anglo American Platinum • Mr Ndumiso Mnguni Thank you Zizo Gxowa (ZGxowa@csir.co.za) ...

The anisotropy field of FePt L10 nanoparticles controlled by very thin Pt layer

International Nuclear Information System (INIS)

Okamoto, Satoshi; Kitakami, Osamu; Kikuchi, Nobuaki; Miyazaki, Takamichi; Shimada, Yutaka; Chiang, Te-Hsuan

2004-01-01

We have prepared epitaxial FePt L1 0 (001) nanoparticles covered with Pt [d Pt nm]/Ag[(4-d Pt ) nm] overlayers. The particles are oblate spheroids approximately 10 nm in diameter and 2 nm in height. The anisotropy field H k at 0 K, which is evaluated from the temperature dependences of coercivity H c , decreases from 90 to 60 kOe on increasing the Pt thickness from d Pt 0 to 1.5 nm, while the energy barrier at zero field remains unchanged. The significant reduction of H k due to the presence of the adjacent Pt layer can be attributed to an enhanced magnetic moment caused by the ferromagnetic polarization of Pt atoms at the interface. This finding suggests an effective method of controlling the switching field of FePt L1 0 nanoparticles

Adsorption and oxidation of acetaldehyde on carbon supported Pt, PtSn and PtSn-based trimetallic catalysts by in situ Fourier transform infrared spectroscopy

Science.gov (United States)

Beyhan, Seden; Léger, Jean-Michel; Kadırgan, Figen

2013-11-01

The adsorption and oxidation of acetaldehyde on carbon supported Pt, Pt90Sn10 and Pt80Sn10M10 (M = Ni, Co, Rh, Pd) catalysts have been investigated by using in situ Fourier transform infrared (FTIR) spectroscopy. The result revealed that Pt90Sn10/C catalyst is not very efficient for the conversion of acetaldehyde to CO2 due to the weak adsorption of acetaldehyde in the presence of Sn. However, the addition of a third metal to Pt--Sn facilitates the C-C bond cleavage of acetaldehyde. It seems that acetaldehyde is adsorbed dissociatively on the surface of Pt80Sn10Ni10/C, Pt80Sn10Co10/C, Pt80Sn10Rh10/C catalysts, producing CH3 and CHO adsorbate species, which can be further oxidized to CO2. However, the pathway forming CO2 for Pt80Sn10Pd10/C catalyst mainly originates from the oxidation of CH3CO species. Thus, the presence of third metal in the PtSn catalyst has a strong impact upon the acetaldehyde adsorption behaviour and its reaction products.

Electrocatalytic oxidation of methanol on (Pb) lead modified by Pt, Pt-Ru and Pt-Sn microparticles dispersed into poly(o-phenylenediamine) film

Energy Technology Data Exchange (ETDEWEB)

Golikand, Ahmad Nozad; Maragheh, Mohammad Ghannadi; Irannejad, Leila [Jaber Ibn Hayan Research Lab., Atomic Energy Organization of Iran (AEOI), Tehran (Iran); Golabi, Seyed Mehdi [Electroanalytical Chemistry Lab., Faculty of Chemistry, University of Tabriz, Tabriz (Iran)

2005-08-18

The electrocatalytic oxidation of methanol at a (Pb) lead electrode modified by Pt, Pt-Ru and Pt-Sn microparticles dispersed into poly(o-phenylenediamine) (PoPD) film has been investigated using cyclic voltammetry as analytical technique and 0.5M sulfuric acid as supporting electrolyte. It has been shown that the presence of PoPD film increases considerably the efficiency of deposited Pt and Pt alloys microparticles toward the electrocatalytic oxidation of methanol. The catalytic activity of Pt particles is further enhanced when Ru and especially Sn, is co-deposited in the polymer film. The effects of various parameters such as concentration of methanol, medium temperature as well as the long term stability of modified electrodes have also been investigated. (author)

Preparation and characterization of Pt/C and Pt-Ru/C electrocatalysts for direct ethanol fuel cells

Energy Technology Data Exchange (ETDEWEB)

Liu, Zhaolin; Ling, Xing Yi; Su, Xiaodi; Lee, Jim Yang; Gan, Leong Ming [Institute of Materials Research and Engineering, 3 Research Link, Singapore 117602 (Singapore)

2005-09-26

Nano-sized Pt and Pt-Ru colloids are prepared by a microwave-assisted polyol process, and transferred to a toluene solution of decanthiol. Vulcan XC-72 is then added to the toluene solution to adsorb the thiolated Pt and Pt-Ru colloids. Transmission electron microscopy examinations show nearly spherical particles and narrow size distributions for both supported and unsupported metals. The carbon-supported Pt and Pt-Ru nanoparticles are activated by thermal treatment to remove the thiol stabilizing shell. All Pt and Pt-Ru catalysts (except Pt{sub 23}-Ru{sub 77}) give the X-ray diffraction pattern of a face-centered cubic (fcc) crystal structure, whereas the Pt{sub 23}-Ru{sub 77} alloy is more typical of the hexagonal close packed (hcp) structure. The electro-oxidation of liquid ethanol on these catalysts is investigated at room temperature by cyclic voltammetry. The results demonstrate that the alloy catalyst is catalytically more active than pure platinum. Preliminary tests on a single cell of a direct ethanol fuel cell (DEFC) indicate that a Pt{sub 52}-Ru{sub 48}/C anode catalyst gives the best electrocatalytic performance among all the carbon-supported Pt and Pt-Ru catalysts. (author)

Strongly bound excitons in monolayer PtS2 and PtSe2

KAUST Repository

Sajjad, M.

2018-01-22

Based on first-principles calculations, the structural, electronic, and optical properties of monolayers PtS2 and PtSe2 are investigated. The bond stiffnesses and elastic moduli are determined by means of the spring constants and strain-energy relations, respectively. Dynamic stability is confirmed by calculating the phonon spectra, which shows excellent agreement with experimental reports for the frequencies of the Raman-active modes. The Heyd-Scuseria-Ernzerhof functional results in electronic bandgaps of 2.66 eV for monolayer PtS2 and 1.74 eV for monolayer PtSe2. G0W0 calculations combined with the Bethe-Salpeter equation are used to predict the optical spectra and exciton binding energies (0.78 eV for monolayer PtS2 and 0.60 eV for monolayer PtSe2). It turns out that the excitons are strongly bound and therefore very stable against external perturbations.

Carbon-coated NiPt, CoPt nanoalloys: size control and magnetic properties

Energy Technology Data Exchange (ETDEWEB)

El-Gendy, A.A. [Kirchhoff Institute for Physics, University of Heidelberg, D-69120 Heidelberg (Germany); Leibniz Institute for Solid State and Materials Research (IFW) Dresden (Germany); Hampel, S.; Leonhardt, A.; Khavrus, V.; Buechner, B. [Leibniz Institute for Solid State and Materials Research (IFW) Dresden (Germany); Klingeler, R. [Kirchhoff Institute for Physics, University of Heidelberg, D-69120 Heidelberg (Germany)

2011-07-01

Controlled synthesis of magnetic nanoparticles with well-defined size and composition is always a challenge in material-based nanoscience. Here, we apply the high pressure chemical vapour deposition technique (HPCVD) to obtain carbon-shielded magnetic alloy nanoparticles under control of the particle size. Carbon encapsulated NiPt, CoPt (NiPt rate at C, CoPt rate at C) nanoalloys were synthesized by means of HPCVD starting from sublimating appropriate metal-organic precursors. Structural characterization by means of high resolution transmission electron microscopy, energy dispersive X-ray analysis and X-ray diffraction indicated the formation of coated bimetallic Ni{sub x}Pt{sub 100-x} and CoxPt{sub 100-x} nanoparticles. Adjusting the sublimation temperature of the different precursors allowed tuning the core sizes with small size distribution. In addition, detailed studies of the magnetic properties are presented. AC magnetic heating studies imply the potential of the coated nanoalloys for hyperthermia therapy.

Ontogenetic view on PIVKA-II in the development of prothrombin synthesis in infants

Directory of Open Access Journals (Sweden)

O. G. Ivanko

2017-12-01

Full Text Available The aim of the research was to study the content of PIVKA-II in the blood serum as an integrative measure of latent vitamin K deficiency in breastfed infants aged from the birth to 6 months of life. Materials and methods. 178 children aged from the birth to 6 months of life who were born without birth injuries in the term of 38–41 of weeks gestation with a weight 2800–4200 g were examined. The immunoenzyme assay for PIVKA-II study was performed with ANTIBODY RESEARCH kit PIVKA-II ELISA Kit (USA Results. Children who had not received postnatal prophylactic injection of vitamin K1 in dose of 1 mg intramuscularly in their majority (62 % had abnormally elevated serum PIVKA-II (>40 Au/ml at the first week of life. In 92 % of children who had received a prophylactic dose of vitamin K1 immediately after birth, PIVKA-II was in a normal limit. The normal concentrations of PIVKA-II were observed in children aged 2–6 months regardless of vitamin K prophylactics. The situation worsened dramatically in children who were treated with antibiotics because more than 50 % of these children have experienced high PIVKA-II values. Conclusions. Almost all the children in their first week of life whom for any reasons vitamin K1 was not prescribed have exhibited an elevation of PIVKA-II in blood serum. This indicates an inborn deficiency of vitamin K experienced by fetuses and newborns. Prophylactic injection of vitamin K1 to newborns normalizes the processes of prothrombin carboxylation and PIVKA-II concentrations are getting normal. Children, who did not receive vitamin K1 after the birth, during the first month of life spontaneously normalize the PIVKA-II concentrations. The improvement of prothrombin carboxylation is obviously connected with the colon microbiota development which can provide children with well absorbed vitamin K2 (menaquinone. In 55.5 % of breastfed children aged up to 6 months who had received antibiotics the PIVKA-II appeared elevated again

MnO2/CNT supported Pt and PtRu nanocatalysts for direct methanol fuel cells.

Science.gov (United States)

Zhou, Chunmei; Wang, Hongjuan; Peng, Feng; Liang, Jiahua; Yu, Hao; Yang, Jian

2009-07-07

Pt/MnO2/carbon nanotube (CNT) and PtRu/MnO2/CNT nanocomposites were synthesized by successively loading hydrous MnO2 and Pt (or PtRu alloy) nanoparticles on CNTs and were used as anodic catalysts for direct methanol fuel cells (DMFCs). The existence of MnO2 on the surface of CNTs effectively increases the proton conductivity of the catalyst, which then could remarkably improve the performance of the catalyst in methanol electro-oxidation. As a result, Pt/MnO2/CNTs show higher electrochemical active surface area and better methanol electro-oxidation activity, compared with Pt/CNTs. As PtRu alloy nanoparticles were deposited on the surface of MnO2/CNTs instead of Pt, the PtRu/MnO2/CNT catalyst shows not only excellent electro-oxidation activity to methanol with forward anodic peak current density of 901 A/gPt but also good CO oxidation ability with lower preadsorbed CO oxidation onset potential (0.33 V vs Ag/AgCl) and peak potential (0.49 V vs Ag/AgCl) at room temperature.

Effect of the applied magnetic field and the layer thickness on the magnon properties in bilayers Co/Pt and symmetrical trilayer Pt/Co/Pt

International Nuclear Information System (INIS)

Mehdioui, M.; Fahmi, A.; Lassri, H.; Fahoume, M.; Qachaou, A.

2014-01-01

We have studied the elementary magnetic excitations and their dynamics in multilayer Co(t Co)/Pt(t Pt) and Pt(t Pt)/Co(t Co)/Pt(t Pt) under an applied magnetic field. The Heisenberg hamiltonian used takes into account the magneto-crystalline and surface anisotropies, the exchange and dipolar interactions. The calculated excitation spectrum ε N (k) presents a structure with two sub-bands corresponding to the magnons of surface and volume respectively. The existence of a gap of creating these magnons is also highlighted. The lifetimes deduced from these gaps are in good agreement with the results of previous studies. The thermal evolution of the magnetization m z indicates that the system undergoes a dimensional crossover 3D–2D when the temperature increases. The calculated and measured magnetizations are compared and they are in good agreement. The exchange integral and critical temperature values deduced from these adjustments are in very good agreement with the results of previous works. - Highlights: • The magnons of surface and volume exist in Co/Pt and Pt/Co/Pt. • Samples undergo dimensional crossover (3D–2D) when T increases. • A good agreement is obtained between M(T) measured and calculated. • Deduced exchange integrals and critical temperature values are correct. • The magnetism of the sample is reduced by increasing t Pt or capping Co by two Pt layers

Characteristics of ferroelectric Pb(Zr,Ti)O3 thin films having Pt/PtOx electrode barriers

International Nuclear Information System (INIS)

Lee, Kwangbae; Rhee, Byung Roh; Lee, Chanku

2001-01-01

We have investigated the feasibility of the Pt/PtO x multilayer as an electrode barrier for Pb(Zr,Ti)O 3 (PZT)-based ferroelectric random access memories. PtO x and Pt layers were prepared on polycrystalline-Si/SiO 2 /Si substrates by means of the sputtering method in Ar and O 2 ambience, and the Pb(Zr 0.53 Ti 0.47 )O 3 layer was prepared by the sol-gel method. A capacitor consisting of Pt/PtO x /PZT/PtO x /Pt/PtO x /poly-Si had a remanent polarization of 18 μC/cm 2 and a low coercive field of 32 kV/cm. The polarization fatigue behavior of test capacitors was improved as compared with that of Pt/PZT/Pt, which showed negligible fatigue loss of 15% after 10 11 switching repetitions with a frequency of 1 MHz. Copyright 2001 American Institute of Physics

Electron transport in a Pt-CO-Pt nanocontact: Density functional theory calculations

DEFF Research Database (Denmark)

Strange, Mikkel; Thygesen, Kristian Sommer; Jacobsen, Karsten Wedel

2006-01-01

We have performed first-principles calculations for the mechanic and electric properties of pure Pt nanocontacts and a Pt contact with a single CO molecule adsorbed. For the pure Pt contacts we see a clear difference between point contacts and short chains in good agreement with experiments. We...

Low Pt content direct methanol fuel cell anode catalyst: nanophase PtRuNiZr

Science.gov (United States)

Narayanan, Sekharipuram R. (Inventor); Whitacre, Jay F. (Inventor)

2010-01-01

A method for the preparation of a metallic material having catalytic activity that includes synthesizing a material composition comprising a metal content with a lower Pt content than a binary alloy containing Pt but that displays at least a comparable catalytic activity on a per mole Pt basis as the binary alloy containing Pt; and evaluating a representative sample of the material composition to ensure that the material composition displays a property of at least a comparable catalytic activity on a per mole Pt basis as a representative binary alloy containing Pt. Furthermore, metallic compositions are disclosed that possess substantial resistance to corrosive acids.

Reaction of cyanide with Pt-nucleobase complexes: preparative, spectroscopic, and structural studies. Unexpected stability of Pt-thymine and Pt-uracil complexes

International Nuclear Information System (INIS)

Raudaschl-Sieber, G.; Lippert, B.

1985-01-01

In order to improve the understanding of the nature of the strongly bound cisplatin on DNA, the reactivity of a large number of complexes of cis-(NH 3 ) 2 Pt/sup II/ with the model nucleobases, 9-ethylguanine, 9-methyladenine, 1-methylcytisine, 1-methylthymine, and i-methyluracil, toward a large excess of cyanide was studied. The behavior of Pt-nucleobase complexes toward CN - is compared with that of simple Pt-amine complexes, and reactions of thiourea with two selected nucleobase complexes is reported. The relevance of these findings with respect to substitution reactions of Pt-nucleobase complexes and the nature of the tightly DNA-bound Pt, which cannot be removed by excess KCN, is discussed

Te/Pt nanonetwork modified carbon fiber microelectrodes for methanol oxidation

International Nuclear Information System (INIS)

Tsai, Hsiang-Yu; Shih, Zih-Yu; Lin, Zong-Hong; Chang, Huan-Tsung

2013-01-01

Te/Pt nanonetwork-decorated carbon fiber microelectrodes (CFMEs) have been fabricated and employed as anodic catalysts in a direct methanol fuel cell (DMFC). Te nanowires were prepared from tellurite ions (TeO 3 2− ) through a seed-mediated growth process and were deposited onto CFMEs to form three-dimensional Te nanonetworks. The Te nanonetworks then acted as a framework and reducing agent to reduce PtCl 6 2− ions to form Te/Pt through a galvanic replacement reaction, leading to the formation of Te/PtCFMEs. By controlling the reaction time, the amount of Pt and morphology of Te/Pt nanonetworks were controlled, leading to various degrees of electrocatalytic activity. The Te/PtCFMEs provide a high electrochemical active surface area (129.2 m 2 g −1 ), good catalytic activity (1.2 A mg −1 ), high current density (20.0 mA cm −2 ), long durability, and tolerance toward the poisoning species for methanol oxidation in 0.5 M sulfuric acid containing 1 M methanol. We have further demonstrated an enhanced current density by separately using 3 and 5 Te/PtCFMEs. Our results show that the low-cost, stable, and effective Te/PtCFMEs have great potential in the fabrication of cost-effective fuel cells. (paper)

Synaptic characteristics with strong analog potentiation, depression, and short-term to long-term memory transition in a Pt/CeO2/Pt crossbar array structure

Science.gov (United States)

Kim, Hyung Jun; Park, Daehoon; Yang, Paul; Beom, Keonwon; Kim, Min Ju; Shin, Chansun; Kang, Chi Jung; Yoon, Tae-Sik

2018-06-01

A crossbar array of Pt/CeO2/Pt memristors exhibited the synaptic characteristics such as analog, reversible, and strong resistance change with a ratio of ∼103, corresponding to wide dynamic range of synaptic weight modulation as potentiation and depression with respect to the voltage polarity. In addition, it presented timing-dependent responses such as paired-pulse facilitation and the short-term to long-term memory transition by increasing amplitude, width, and repetition number of voltage pulse and reducing the interval time between pulses. The memory loss with a time was fitted with a stretched exponential relaxation model, revealing the relation of memory stability with the input stimuli strength. The resistance change was further enhanced but its stability got worse as increasing measurement temperature, indicating that the resistance was changed as a result of voltage- and temperature-dependent electrical charging and discharging to alter the energy barrier for charge transport. These detailed synaptic characteristics demonstrated the potential of crossbar array of Pt/CeO2/Pt memristors as artificial synapses in highly connected neuron-synapse network.

Hyperfine interaction of 13O and 23Mg implanted in Pt

International Nuclear Information System (INIS)

Matsuta, K.; Yoshida, K.; Ozawa, A.; Momota, S.; Kobayashi, T.; Tanihata, I.; Alonso, J.R.; Krebs, G.F.; Symons, T.J.M.

1996-01-01

The spin relaxation time T 1 for short-lived beta emitters 13 O and 23 Mg implanted in Pt have been measured for the first time; T 1 T( 13 O)=2.90±0.65 Ks and T 1 T( 23 Mg)=1665±140 Ks. The Knight shift for 13 O in Pt was measured at 300 K to be K( 13 O)=+(4.23±0.14).10 -3 . In the case of 13 O, the Knight shift is unusually large and the relaxation time is unusually fast compared with other interstitial impurities in Pt. A KKR band-structure calculation reproduces the present large Knight shift fairly well. (orig.)

Comparison of PZN-PT, PMN-PT single crystals and PZT ceramic for vibration energy harvesting

International Nuclear Information System (INIS)

Yang, Zhengbao; Zu, Jean

2016-01-01

Highlights: • Systematic analysis of PMN-PT and PZN-PT single crystals for energy harvesters. • Performance analysis and comparison under various conditions. • Discussion of the effect of the SSHI technique on single crystal energy harvesters. • Efficiency analysis in both on-resonance and off-resonance conditions. - Abstract: Vibration energy harvesting has a great potential to achieve self-powered operations for wireless sensors, wearable devices and medical electronics, and thus has attracted much attention in academia and industry. The majority of research into this subject has focused on the piezoelectric effect of synthetic materials, especially the perovskite PZT ceramics. Recently the new-generation piezoelectric materials PMN-PT and PZN-PT single crystals have gained significant interest because of their outstanding piezoelectric properties. They can be used to replace the widely-adopted PZT ceramics for improving energy harvesters’ performance substantially. However, there is little research on comparing PMN-PT and PZN-PT energy harvesters against PZT harvesters. In this paper, we present a systematic comparison between vibration energy harvesters using the PMN-PT, PZN-PT single crystals and those using the PZT ceramics. Key properties of the three materials are summarized and compared. The performance of the PMN-PT and PZN-PT energy harvesters is characterized under different conditions (beam length, resistance, frequency, excitation strength, and backward coupling effect), and is quantitatively compared with the PZT counterpart. Furthermore, the effect of the synchronized switch harvesting on inductor (SSHI) circuit on the three harvesters is discussed. The experimental results indicate that energy harvesters using the PMN-PT and PZN-PT single crystals can significantly outperform those using the PZT ceramics. This study provides a strong base for future research on high-performance energy harvesters using the new PMN-PT and PZN-PT single

Pt/Cr and Pt/Ni catalysts for oxygen reduction reaction: to alloy or not to alloy?

Science.gov (United States)

Escaño, Mary Clare; Gyenge, Elod; Nakanishi, Hiroshi; Kasai, Hideaki

2011-04-01

Bimetallic systems such as Pt-based alloys or non-alloys have exhibited interesting catalytic properties but pose a major challenge of not knowing a priori how the electronic and chemical properties will be modified relative to the parent metals. In this work, we present the origin of the changes in the reactivity of Pt/Cr and Pt/Ni catalysts, which have been of wide interest in fuel cell research. Using spin-polarized density functional theory calculations, we have shown that the modification of Pt surface reactivity in Pt/Ni is purely of geometric origin (strain). We have also found that the Pt-Ni bonding is very weak, which explains the observed instability of Pt-Ni catalysts under electrochemical measurements. On the other hand, Pt/Cr systems are governed by strong ligand effect (metal-metal interaction), which explains the experimentally observed reactivity dependence on the relative composition of the alloying components. The general characteristics of the potential energy curves for O2 dissociative adsorption on the bimetallic systems and the pure Pt clarify why the d-band center still works for Pt/Cr despite the strong Pt-Cr bonding and high spin polarization of Pt d-states. On the basis of the above clarifications, viable Pt-Cr and Pt-Ni structures, which involve nano-sized alloys and non-alloy bulk catalyst, which may strike higher than the currently observed oxidation reduction reaction activity are proposed.

Time-resolved measurements of laser-induced diffusion of CO molecules on stepped Pt(111)-surfaces; Zeitaufgeloeste Untersuchung der laser-induzierten Diffusion von CO-Molekuelen auf gestuften Pt(111)-Oberflaechen

Energy Technology Data Exchange (ETDEWEB)

Lawrenz, M.

2007-10-30

In the present work the dynamics of CO-molecules on a stepped Pt(111)-surface induced by fs-laser pulses at low temperatures was studied by using laser spectroscopy. In the first part of the work, the laser-induced diffusion for the CO/Pt(111)-system could be demonstrated and modelled successfully for step diffusion. At first, the diffusion of CO-molecules from the step sites to the terrace sites on the surface was traced. The experimentally discovered energy transfer time of 500 fs for this process confirms the assumption of an electronically induced process. In the following it was explained how the experimental results were modelled. A friction coefficient which depends on the electron temperature yields a consistent model, whereas for the understanding of the fluence dependence and time-resolved measurements parallel the same set of parameters was used. Furthermore, the analysis was extended to the CO-terrace diffusion. Small coverages of CO were adsorbed to the terraces and the diffusion was detected as the temporal evolution of the occupation of the step sites acting as traps for the diffusing molecules. The additional performed two-pulse correlation measurements also indicate an electronically induced process. At the substrate temperature of 40 K the cross-correlation - where an energy transfer time of 1.8 ps was extracted - suggests also an electronically induced energy transfer mechanism. Diffusion experiments were performed for different substrate temperatures. (orig.)

Electro-oxidation of methanol and ethanol using PtRu/C, PtSn/C and PtSnRu/C electrocatalysts prepared by an alcohol-reduction process

Science.gov (United States)

Neto, Almir Oliveira; Dias, Ricardo R.; Tusi, Marcelo M.; Linardi, Marcelo; Spinacé, Estevam V.

PtRu/C, PtSn/C and PtSnRu/C electrocatalysts were prepared by the alcohol reduction process using ethylene glycol as the solvent and reduction agent and Vulcan Carbon XC72 as the support. The electrocatalysts were characterized by EDX, XRD and cyclic voltammetry. The electrochemical oxidation of methanol and ethanol were studied by chronoamperometry using a thin porous coating technique. The PtSn/C electrocatalyst prepared by this methodology showed superior performance compared to the PtRu/C and PtSnRu/C electrocatalysts for methanol and ethanol oxidation at room temperature.

Hereditary thrombophilia and recurrent pregnancy loss: a retrospective cohort study of pregnancy outcome and obstetric complications

DEFF Research Database (Denmark)

Lund, Marie; Nielsen, H S; Hviid, T V

2010-01-01

The association among hereditary thrombophilia, recurrent pregnancy loss (RPL) and obstetric complications is yet uncertain. The objective of the study was to assess the prognostic value of the factor V Leiden (FVL) and prothrombin (PT) mutations for the subsequent chance of live birth for women...

Atom distribution and interactions in Ag{sub x}Pt{sub 1-x} and Au{sub x}Pt{sub 1-x} surface alloys on Pt(111)

Energy Technology Data Exchange (ETDEWEB)

Roetter, Ralf T.; Bergbreiter, Andreas; Hoster, Harry E.; Behm, R. Juergen [Institute of Surface Chemistry and Catalysis, Ulm University, D-89069 Ulm (Germany)

2009-07-01

The atom distributions in Ag{sub x}Pt{sub 1-x}/Pt(111) and Au{sub x}Pt{sub 1-x}/Pt(111) surface alloys were studied by high resolution UHV-STM. These surfaces were prepared by submonolayer Ag (Au) metal deposition on Pt(111), followed by annealing at 900 K or 1000 K, respectively, which in both cases results in surface confined 2D alloys, with equilibrated distribution of the components. Both systems show a tendency towards two-dimensional clustering, which fits well to their known bulk immiscibility. Effective cluster interactions (ECIs) will be derived by a quantitative evaluation of the 2D atom distributions in the surface alloys. By comparing the ECIs for PtAg and PtAu on Pt(111), and considering that Ag and Au have almost similar lattice constants, the results allow conclusion on the physical origin of the tendency for clustering.

STRATEGI PENGEMBANGAN KEMITRAAN TERNAK AYAM BROILER PT. XYZ

Directory of Open Access Journals (Sweden)

Latifa Hanum

2011-11-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} The objectives of this research are to (1 analyze profit and BEP of plasma farmers (2 analyze internal and external strategic factors that influence development of broiler partnership in PT. XYZ, (3 formulate the alternative strategies of broiler partnership in PT. XYZ, (4 formulate selected priority strategy to develop broiler partnership in PT. XYZ. This research uses descriptive method based on case study on broiler partnership in PT. XYZ. Based on BEP analysis, BEP (production of plasma farmers is in the range 79,91%-86,58% from chick-in capacity, and BEP (price is in the range of Rp 11.684 – Rp 12.191 per chicken on market price. PT. XYZ partnership’s position in IE matric was second quadrant (grow and builds. The results of SWOT analysis are: a vertical integration strategy through feedmill, breeding and chicken slaughterhouse, b improving production capacity through capacity building of plasma farmers, c improvement in bio-security aspects of maintenance, and d improving the quality of technical staff and improving supervision. The priority strategy from QSPM analysis is improving production capacity through capacity building of plasma farmers. The strategy to improve production capacity can be done by maximize or add their capacity, and add the new plasma farmers.   Keywords: Broiler Partnership, Internal Environment, External Environment, Internal-external, Improvement Priority

Multifunctional Pt(II) Reagents: Covalent Modifications of Pt Complexes Enable Diverse Structural Variation and In-Cell Detection.

Science.gov (United States)

White, Jonathan D; Haley, Michael M; DeRose, Victoria J

2016-01-19

To enhance the functionality of Pt-based reagents, several strategies have been developed that utilize Pt compounds modified with small, reactive handles. This Account encapsulates work done by us and other groups regarding the use of Pt(II) compounds with reactive handles for subsequent elaboration with fluorophores or other functional moieties. Described strategies include the incorporation of substituents for well-known condensation or nucleophilic displacement-type reactions and their use, for example, to tether spectroscopic handles to Pt reagents for in vivo investigation. Other chief uses of displacement-type reactions have included tethering various small molecules exhibiting pharmacological activity directly to Pt, thus adding synergistic effects. Click chemistry-based ligation techniques have also been applied, primarily with azide- and alkyne-appended Pt complexes. Orthogonally reactive click chemistry reactions have proven invaluable when more traditional nucleophilic displacement reactions induce side-reactivity with the Pt center or when systematic functionalization of a larger number of Pt complexes is desired. Additionally, a diverse assortment of Pt-fluorophore conjugates have been tethered via click chemistry conjugation. In addition to providing a convenient synthetic path for diversifying Pt compounds, the use of click-capable Pt complexes has proved a powerful strategy for postbinding covalent modification and detection with fluorescent probes. This strategy bypasses undesirable influences of the fluorophore camouflaged as reactivity due to Pt that may be present when detecting preattached Pt-fluorophore conjugates. Using postbinding strategies, Pt reagent distributions in HeLa and lung carcinoma (NCI-H460) cell cultures were observed with two different azide-modified Pt compounds, a monofunctional Pt(II)-acridine type and a difunctional Pt(II)-neutral complex. In addition, cellular distribution was observed with an alkyne-appended difunctional

Preparation and characterization of Pt/C and Pt sbnd Ru/C electrocatalysts for direct ethanol fuel cells

Science.gov (United States)

Liu, Zhaolin; Ling, Xing Yi; Su, Xiaodi; Lee, Jim Yang; Gan, Leong Ming

Nano-sized Pt and Pt sbnd Ru colloids are prepared by a microwave-assisted polyol process, and transferred to a toluene solution of decanthiol. Vulcan XC-72 is then added to the toluene solution to adsorb the thiolated Pt and Pt sbnd Ru colloids. Transmission electron microscopy examinations show nearly spherical particles and narrow size distributions for both supported and unsupported metals. The carbon-supported Pt and Pt sbnd Ru nanoparticles are activated by thermal treatment to remove the thiol stabilizing shell. All Pt and Pt sbnd Ru catalysts (except Pt 23sbnd Ru 77) give the X-ray diffraction pattern of a face-centered cubic (fcc) crystal structure, whereas the Pt 23sbnd Ru 77 alloy is more typical of the hexagonal close packed (hcp) structure. The electro-oxidation of liquid ethanol on these catalysts is investigated at room temperature by cyclic voltammetry. The results demonstrate that the alloy catalyst is catalytically more active than pure platinum. Preliminary tests on a single cell of a direct ethanol fuel cell (DEFC) indicate that a Pt 52sbnd Ru 48/C anode catalyst gives the best electrocatalytic performance among all the carbon-supported Pt and Pt sbnd Ru catalysts.

Electro-oxidation of methanol and ethanol using PtRu/C, PtSn/C and PtSnRu/C electrocatalysts prepared by an alcohol-reduction process

Energy Technology Data Exchange (ETDEWEB)

Neto, Almir Oliveira; Dias, Ricardo R.; Tusi, Marcelo M.; Linardi, Marcelo; Spinace, Estevam V. [Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP, Av. Prof. Lineu Prestes 2242, Cidade Universitaria, CEP 05508-900 Sao Paulo, SP (Brazil)

2007-03-30

PtRu/C, PtSn/C and PtSnRu/C electrocatalysts were prepared by the alcohol reduction process using ethylene glycol as the solvent and reduction agent and Vulcan Carbon XC72 as the support. The electrocatalysts were characterized by EDX, XRD and cyclic voltammetry. The electrochemical oxidation of methanol and ethanol were studied by chronoamperometry using a thin porous coating technique. The PtSn/C electrocatalyst prepared by this methodology showed superior performance compared to the PtRu/C and PtSnRu/C electrocatalysts for methanol and ethanol oxidation at room temperature. (author)

Ion-irradiation induced chemical ordering of FePt and FePtAu nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Seetala, Naidu V. [Department of Physics, Grambling State University, RWE Jones Drive, Carver Hall 81, Grambling, LA 71245 (United States)]. E-mail: naidusv@gram.edu; Harrell, J.W. [MINT Center, University of Alabama, Tuscaloosa, AL 35487 (United States); Lawson, Jeremy [MINT Center, University of Alabama, Tuscaloosa, AL 35487 (United States); Nikles, David E. [MINT Center, University of Alabama, Tuscaloosa, AL 35487 (United States); Williams, John R. [Department of Physics, Auburn University, Auburn, AL 36849 (United States); Isaacs-Smith, Tamara [Department of Physics, Auburn University, Auburn, AL 36849 (United States)

2005-12-15

We have studied the effect of ion-beam irradiation on reducing the ordering temperature of FePt and FePtAu nanoparticles. FePt and FePt(Au14%) 4 nm particles dispersed on a Si-substrate were irradiated by 300 keV Al-ions with a dose of 1 x 10{sup 16} ions/cm{sup 2} at 43 {sup o}C using a water-cooled flange in order to minimize the vacancy migration and voids formation within the collision cascades. Partial chemical ordering has been observed in as-irradiated particles with coercivity of 60-130 Oe. Post-irradiation annealing at 220 {sup o}C enhanced chemical ordering in FePt nanoparticles with coercivity of 3500 Oe, magnetic anisotropy of 1.5 x 10{sup 7} erg/cc, and thermal stability factor of 130. A much higher 375 {sup o}C post-irradiation annealing was required in FePtAu, presumably because Au atoms were trapped at Fe/Pt lattice sites at lower temperatures. As the annealing temperature increased, anomalous features in the magnetization reversal curves were observed that disappeared at higher annealing temperatures.

Electrooxidation of ethanol on Pt and PtRu surfaces investigated by ATR surface-enhanced infrared absorption spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Silva, Marcio F.; Camara, Giuseppe A., E-mail: giuseppe.silva@ufms.br [Departamento de Quimica, Universidade Federal do Mato Grosso do Sul, Campo Grande-MS (Brazil); Batista, Bruno C.; Boscheto, Emerson [Instituto de Quimica de Sao Carlos, Universidade de Sao Paulo, Sao Carlos-SP, (Brazil); Varela, Hamilton, E-mail: varela@iqsc.usp.br [Ertl Center for Electrochemistry and Catalysis, Gwangju Institute of Science and Technology (GIST), Gwangju (Korea, Republic of)

2012-05-15

Herein, it was investigated for the first time the electro-oxidation of ethanol on Pt and PtRu electrodeposits in acidic media by using in situ surface enhanced infrared absorption spectroscopy with attenuated total reflection (ATR-SEIRAS). The experimental setup circumvents the weak absorbance signals related to adsorbed species, usually observed for rough, electrodeposited surfaces, and allows a full description of the CO coverage with the potential for both catalysts. The dynamics of adsorption-oxidation of CO was accessed by ATR-SEIRAS experiments (involving four ethanol concentrations) and correlated with expressions derived from a simple kinetic model. Kinetic analysis suggests that the growing of the CO adsorbed layer is nor influenced by the presence of Ru neither by the concentration of ethanol. The results suggest that the C-C scission is not related to the presence of Ru and probably happens at Pt sites. (author)

PtRu nanoparticles dispersed on nitrogen-doped carbon nanohorns as an efficient electrocatalyst for methanol oxidation reaction

International Nuclear Information System (INIS)

Zhang, Linwei; Gao, Ang; Liu, Yan; Wang, Yuan; Ma, Jiantai

2014-01-01

Highlights: • A novel anode catalyst is synthesized using N-doped carbon nanohorns as support. • PtRu/NCNHs exhibits an excellent activity for MOR relative to PtRu/C catalysts. • The enhancement is due to the electronic interaction between NCNHs and PtRu NPs. - Abstract: A novel anode catalyst (PtRu/NCNHs) assembled with nitrogen-doped carbon nanohorns (NCNHs) and PtRu nanoparticles (1.9 nm) exhibits an obvious enhancement in the tolerance to carbonaceous intermediates and the electocatalytic activity for methanol oxidation reaction (MOR) in comparison to a commercial PtRu/C-JM catalyst and a home-made PtRu/Vulcan catalyst. The MOR mass activity of PtRu/NCNHs (850 mA mg −1 PtRu ) is 2.5 times as high as that of PtRu/C-JM (341 mA mg −1 PtRu ). The MOR specific activity of PtRu/NCNHs is 1.8 times as high as that of PtRu/Vulcan having similar Pt/Ru atomic ratios, specific electrochemical surface areas and particle sizes of PtRu NPs. The electronic interaction between PtRu NPs and NCNHs is responsible for the enhancement in the MOR activity of PtRu/NCNHs

Early graft function and carboxyhemoglobin level in liver transplanted patients.

Science.gov (United States)

Ali, Yasser; Negmi, H; Elmasry, N; Sadek, M; Riaz, A; Al Ouffi, H; Khalaf, H

2007-10-01

Heme-Oxygenase-1 catalyzes hemoglobin into bilirubin, iron, and carbon monoxide, a well known vasodilator. Heme-Oxygenase-1 expression and carbon monoxide production as measured by blood carboxyhemoglobin levels, increase in end stage liver disease patients. We hypothesized that there may be a correlation between carboxyhemoglobin level and early graft function in patients undergoing liver transplant surgeries. In a descriptive retrospective study, 39 patients who underwent liver transplantation between the year 2005 and 2006 at KFSH&RC, are included in the study. All patients received general anesthesia with isoflurane in 50% oxygen and air. Levels of oxyhemoglobin, carboxyhemoglobin and methemoglobin concentration in percentage were recorded at preoperative time, anhepatic phase, end of surgery, ICU admission and 24 hr after surgery. The level of lactic acid, prothrombin time (PT), partial thrombin time (PTT), serum total bilirubin and ammonia were also recorded at ICU admission and 24 hr after surgery. The numbers of blood units transfused were recorded. 39 patients were included in the study with 13/39 for living donor liver transplant (LDLT) compared to 26/39 patients scheduled for deceased donor liver transplant (DDLT). The mean age was 35.9 +/- 16.9 years while the mean body weight was 60.3 +/- 20.9 Kg. Female to male ratio was 21/18. The median packed red blood cell (PRBC) units was 4 (Rang 0-40). There was a significant increase in carboxyhemoglobin level during the anhepatic phase, end of surgery and on ICU admission compared with preoperative value (pcarboxyhemoglobin level on ICU admission and 24 hrs postoperatively were positively correlated with the changes in serum total bilirubin and prothrombin time (R = 0.35, 0.382, 0.325 and 0.31) respectively pcarboxyhemoglobin concentration and PT and total bilirubin while still the correlation with lactic acid was weak. There was no correlation between average perioperative carboxyhemoglobin concentration

Electrodeposited Pt for cost-efficient and flexible dye-sensitized solar cells

International Nuclear Information System (INIS)

Kim, Seok-Soon; Nah, Yoon-Chae; Noh, Yong-Young; Jo, Jang; Kim, Dong-Yu

2006-01-01

Pt electrodes were prepared by direct and pulse current electrodeposition for use as counter electrodes in dye-sensitized solar cells. Scanning electron microscope and transmission electron microscope images confirmed the formation of uniform Pt nanoclusters of ∼40 nm composed of 3 nm nanoparticles, when the pulse current electrodeposition method was used, as opposed to the dendritic growth of Pt by the results from direct current electrodeposition. By applying pulse electrodeposited Pt which has a 1.86 times higher surface area compared to direct current electrodeposited Pt, short-circuit current and conversion efficiency were increased from 10.34 to 14.11 mA/cm 2 and from 3.68 to 5.03%, respectively. In addition, a flexible solar cell with a pulse current electrodeposited Pt counter electrode with a conversion efficiency of 0.86% was demonstrated

Electrocatalytic activity of Pt and PtCo deposited on Ebonex by BH reduction

International Nuclear Information System (INIS)

Slavcheva, E.; Nikolova, V.; Petkova, T.; Lefterova, E.; Dragieva, I.; Vitanov, T.; Budevski, E.

2005-01-01

The method of borohydride reduction (BH) has been applied to synthesize Pt and PtCo nanoparticles supported on Magneli phase titanium oxides, using Pt and Co ethylenediamine complexes as metal precursors. The phase composition of the synthesized catalysts, their morphology and surface structure were studied by physical methods for bulk and surface analysis, such as electron microprobe analysis (EMPA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and BET technique. The catalytic activity towards oxygen evolution reaction in alkaline aqueous solution was investigated using the common electrochemical techniques. It was found that PtCo/Ebonex facilitates essentially the oxygen evolution which starts at lower overpotentials and proceeds with higher rate compared to both the supported Pt and unsupported PtCo catalysts. The observed effect is prescribed to metal-metal and metal-support interactions. The Ebonex possesses a good electrical conductivity and corrosion resistance at high anodic potentials and despite its low surface area is considered as a potential catalyst carrier for the oxygen evolution reaction

Thermodynamic modeling of the Pt-Zr system

International Nuclear Information System (INIS)

Gao Yongliang; Guo Cuiping; Li Changrong; Du Zhenmin

2010-01-01

By means of the CALPHAD (CALculation of PHAse Diagram) technique, the Pt-Zr system was critically assessed. The solution phases (liquid, bcc, fcc and hcp) are described with the substitutional model. The intermetallic compounds Pt 4 Zr, Pt 4 Zr 3 , αPtZr and Pt 3 Zr 5 are treated as the formula (Pt,Zr) m (Pt,Zr) n by a two-sublattice model with the elements Pt and Zr on the first and the second sublattices, respectively. A two-sublattice model (Pt,Zr) 0.5 (Pt,Zr) 0.5 is applied to describe the compound βPtZr with CsCl-type structure (B2) in order to cope with the order-disorder transition between bcc solution (A2) and βPtZr (B2). Another two-sublattice model (Pt,Zr) 0.75 (Pt,Zr) 0.25 with Ni 3 Ti-type structure (D0 24 ) is applied to describe the compound Pt 3 Zr in order to cope with the order-disorder transition between hexagonal close-packed (A3) and Pt 3 Zr (D0 24 ). The compound Pt 10 Zr 7 is treated as a stoichiometric compound. A set of self-consistent thermodynamic parameters of the Pt-Zr system was obtained. (orig.)

Study the Polyol Process of Preparing the ru Doped FePt Nanoparticles

Science.gov (United States)

Lee, Chih-Hao; Hsu, Jen-Ho; Su, Hui-Chia; Huang, Tzu Wen

The structure of Ru doped FePt nanoparticles using polyol process was studied. The particle size grown is around 5 nm, and a shell structure might be formed. By selecting the time and temperature of adding the Ru precursors into solution, three different processes to synthesize the FePtRu particles were studied resulting in different growing mechanics. The possible models during the reaction process are also discussed. The phase transition temperature for the as-grown FCC FePt nanoparticle to transform into L10 FePt nanoparticle is about 823 K which is about the same as the one without doping Ru atoms. From the XAS study of each element, the possible scenario is that: although Ru atoms with the size close to the Pt, they do not totally replace the Pt sites in the FePt alloy. Instead, most of Ru formed a shell outside the FePt nanoparticles and Fe atoms are replaced.

A novel binary Pt{sub 3}Te{sub x}/C nanocatalyst for ethanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Huang, Meihua; Wang, Fei; Li, Lirong; Guo, Yonglang [College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350002 (China)

2008-03-15

The Pt{sub 3}Te{sub x}/C nanocatalyst was prepared and its catalytic performance for ethanol oxidation was investigated for the first time. The Pt{sub 3}Te/C nanoparticles were characterized by an X-ray diffractometer (XRD), transmission electron microscope (TEM) and energy dispersive X-ray spectroscopy equipped with TEM (TEM-EDX). The Pt{sub 3}Te/C catalyst has a typical fcc structure of platinum alloys with the presence of Te. Its particle size is about 2.8 nm. Among the synthesized catalysts with different atomic ratios, the Pt{sub 3}Te/C catalyst has the highest anodic peak current density. The cyclic voltammograms (CV) show that the anodic peak current density for the Pt{sub 3}Te/C, commercial PtRu/C and Pt/C catalysts reaches 1002, 832 and 533 A g{sup -1}, respectively. On the current-time curve, the anodic current on the Pt{sub 3}Te/C catalyst was higher than those for the catalysts reported. So, these findings show that the Pt{sub 3}Te/C catalyst has uniform nanoparticles and the best activity among the synthesized catalysts, and it is better than commercial PtRu/C and Pt/C catalysts for ethanol oxidation at room temperature. (author)

Design of Pt/Carbon Xerogel Catalysts for PEM Fuel Cells

Directory of Open Access Journals (Sweden)

Nathalie Job

2015-01-01

Full Text Available The design of efficient catalytic layers of proton exchange membrane fuel cells (PEMFCs requires the preparation of highly-loaded and highly-dispersed Pt/C catalysts. During the last few years, our work focused on the preparation of Pt/carbon xerogel electrocatalysts, starting from simple impregnation techniques that were further optimized via the strong electrostatic adsorption (SEA method to reach high dispersion and a high metal weight fraction. The SEA method, which consists of the optimization of the precursor/support electrostatic impregnation through an adequate choice of the impregnation pH with regard to the support surface chemistry, leads to very well-dispersed Pt/C samples with a maximum 8 wt.% Pt after drying and reduction under H2. To increase the metal loading, the impregnation-drying-reduction cycle of the SEA method can be repeated several times, either with fresh Pt precursor solution or with the solution recycled from the previous cycle. In each case, a high dispersion (Pt particle size ~3 nm is obtained. Finally, the procedure can be simplified by combination of the SEA technique with dry impregnation, leading to no Pt loss during the procedure.

Electro-oxidation of Ethanol on Carbon Supported PtSn and PtSnNi Catalysts

Directory of Open Access Journals (Sweden)

Nur Hidayati

2016-03-01

Full Text Available Even though platinum is known as an active electro-catalyst for ethanol oxidation at low temperatures (< 100 oC, choosing the electrode material for ethanol electro-oxidation is a crucial issue. It is due to its property which easily poisoned by a strong adsorbed species such as CO. PtSn-based electro-catalysts have been identified as better catalysts for ethanol electro-oxidation. The third material is supposed to improved binary catalysts performance. This work presents a study of the ethanol electro-oxidation on carbon supported Pt-Sn and Pt-Sn-Ni catalysts. These catalysts were prepared by alcohol reduction. Nano-particles with diameters between 2.5-5.0 nm were obtained. The peak of (220 crystalline face centred cubic (fcc Pt phase for PtSn and PtSnNi alloys was repositioned due to the presence of Sn and/or Ni in the alloy. Furthermore, the modification of Pt with Sn and SnNi improved ethanol and CO electro-oxidation. Copyright © 2016 BCREC GROUP. All rights reserved Received: 10th November 2015; Revised: 1st February 2016; Accepted: 1st February 2016 How to Cite: Hidayati, N., Scott, K. (2016. Electro-oxidation of Ethanol on Carbon Supported PtSn and PtSnNi Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (1: 10-20. (doi:10.9767/bcrec.11.1.394.10-20 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.11.1.394.10-20

Las bases del PT: ideología versus personalismo en su apoyo electoral Sources of PT: ideology versus personalism in its electoral support

Directory of Open Access Journals (Sweden)

David SAMUELS

2011-01-01

Full Text Available

pt; margin: 0cm 0cm 9.85pt;">Times New Roman;">pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">Este artículo explora datos del pt; mso-bidi-font-family: 'BFHAF K+ Simoncini Garamond';">Estudo Eleitoral Brasileiro pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">para investigar las bases de apoyo al pt; mso-bidi-font-family: 'BFHAF K+ Simoncini Garamond';">Partido dos Trabalhadores pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">(pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">PTpt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">, que llegó por primera vez a la Presidencia de la República en Brasil en las elecciones de 2002. Los resultados muestran que los electores del pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">PT pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">están más identificados con el liderazgo de Luiz Inácio Lula da Silva, actual presidente y líder histórico del partido, que con la ideología del pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">PTpt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">. Sin embargo, los vínculos ideológicos entre el pt; mso-bidi-font-family: 'BFHAF J+ Simoncini Garamond';">PT pt; mso

Mechanisms of current conduction in Pt/BaTiO3/Pt resistive switching cell

International Nuclear Information System (INIS)

Pan, R.K.; Zhang, T.J.; Wang, J.Y.; Wang, J.Z.; Wang, D.F.; Duan, M.G.

2012-01-01

The 80-nm-thickness BaTiO 3 (BT) thin film was prepared on the Pt/Ti/SiO 2 /Si substrate by the RF magnetron sputtering technique. The Pt/BT/Pt/Ti/SiO 2 /Si structure was investigated using X-ray diffraction and scanning electron microscopy. The current–voltage characteristic measurements were performed. The bipolar resistive switching behavior was found in the Pt/BT/Pt cell. The current–voltage curves were well fitted in different voltage regions at the high resistance state (HRS) and the low resistance state (LRS), respectively. The conduction mechanisms are concluded to be Ohmic conduction and Schottky emission at the LRS, while space-charge-limited conduction and Poole–Frenkel emission at the HRS. The electroforming and switching processes were explained in terms of the valence change mechanism, in which oxygen vacancies play a key role in forming conducting paths. - Highlights: ►Pt/BaTiO 3 /Pt cell shows the bipolar resistive switching behavior. ►The current–voltage curves were well fitted for different conduction mechanisms. ►The electroforming and switching processes were explained.

Haemorrhage and intestinal lymphoma

Directory of Open Access Journals (Sweden)

Attilia M. Pizzini

2013-04-01

Full Text Available Background: The prevalence of coeliac disease is around 1% in general population but this is often unrecognised. The classical presentation of adult coeliac disease is characterized by diarrhoea and malabsorption syndrome, but atypical presentations are probably more common and are characterized by iron deficiency anaemia, weight loss, fatigue, infertility, arthralgia, peripheral neuropathy and osteoporosis. Unusual are the coagulation disorders (prevalence 20% and these are due to vitamin K malabsorption (prolonged prothrombin time. Clinical case: A 64-year-old man was admitted to our Department for an extensive spontaneous haematoma of the right leg. He had a history of a small bowel resection for T-cell lymphoma, with a negative follow-up and he didn’t report any personal or familiar history of bleeding. Laboratory tests showed markedly prolonged prothrombin (PT and partial-thromboplastin time (PTT, corrected by mixing studies, and whereas platelet count and liver tests was normal. A single dose (10 mg of intravenous vitamin K normalized the PT. Several days before the patient had been exposed to a superwarfarin pesticide, but diagnostic tests for brodifacoum, bromadiolone or difenacoum were negative. Diagnosis of multiple vitamin K-dependent coagulationfactor deficiencies (II, VII, IX, X due to intestinal malabsorption was made and coeliac disease was detected. Therefore the previous lymphoma diagnosis might be closely related to coeliac disease. Conclusions: A gluten free diet improves quality of life and restores normal nutritional and biochemical status and protects against these complications.

Hydrogenation of Phenol over Pt/CNTs: The Effects of Pt Loading and Reaction Solvents

OpenAIRE

Feng Li; Bo Cao; Wenxi Zhu; Hua Song; Keliang Wang; Cuiqin Li

2017-01-01

Carbon nanotubes (CNTs)-supported Pt nanoparticles were prepared with selective deposition of Pt nanoparticles inside and outside CNTs (Pt–in/CNTs and Pt–out/CNTs). The effects of Pt loading and reaction solvents on phenol hydrogenation were investigated. The Pt nanoparticles in Pt–in/CNTs versus Pt–out/CNTs are smaller and better dispersed. The catalytic activity and reuse stability toward phenol hydrogenation both improved markedly. The dichloromethane–water mixture as the reaction solvent,...

[Zn(NH3)4][PtCl6] and [Cd(NH3)4][PtCl6] as precursors for intermetallic compounds PtZn and PtCd

International Nuclear Information System (INIS)

Zadesenets, A.V.; Venediktov, A.B.; Shubin, Yu.V.; Korenev, S.V.

2007-01-01

Double complex salts (tetraamminezinc and tetraamminecadmium hexachloroplatinates) have been synthesized. Their thermal properties have been studied, as well as the products of their degradation in hydrogen and helium atmospheres. Optimal thermolysis schedules have been determined. Thermolysis under hydrogen yields intermetallic compounds PtZn and PtCd [ru

Factor V Leiden mutation, prothrombin gene mutation, and deficiencies in coagulation inhibitors associated with Budd-Chiari syndrome and portal vein thrombosis: results of a case-control study

NARCIS (Netherlands)

Janssen, H. L.; Meinardi, J. R.; Vleggaar, F. P.; van Uum, S. H.; Haagsma, E. B.; van der Meer, F. J.; van Hattum, J.; Chamuleau, R. A.; Adang, R. P.; Vandenbroucke, J. P.; van Hoek, B.; Rosendaal, F. R.

2000-01-01

In a collaborative multicenter case-control study, we investigated the effect of factor V Leiden mutation, prothrombin gene mutation, and inherited deficiencies of protein C, protein S, and antithrombin on the risk of Budd-Chiari syndrome (BCS) and portal vein thrombosis (PVT). We compared 43 BCS

Factor V Leiden mutation, prothrombin gene mutation, and deficiencies in coagulation inhibitors associated with Budd-Chiari syndrome and portal vein thrombosis : results of a case-control study

NARCIS (Netherlands)

Janssen, HLA; Meinardi, [No Value; Vleggaar, FP; van Uum, SHM; Haagsma, EB; van der Meer, FJM; van Hattum, J; Chamuleau, RAFM; Adang, RP; Vandenbroucke, JP; van Hoek, B; Rosendaal, FR

2000-01-01

In a collaborative multicenter case-control study, we investigated the effect of factor V Leiden mutation, prothrombin gene mutation, and inherited deficiencies of protein C, protein S, and antithrombin on the risk of Budd-Chiari syndrome (BCS) and portal vein thrombosis (PVT), We compared 43 BCS

Uniform Au@Pt core-shell nanodendrites supported on molybdenum disulfide nanosheets for the methanol oxidation reaction

Science.gov (United States)

Su, Shao; Zhang, Chi; Yuwen, Lihui; Liu, Xingfen; Wang, Lihua; Fan, Chunhai; Wang, Lianhui

2015-12-01

Herein, we presented a facile seeded growth method to prepare high-quality three-dimensional (3D) Au@Pt bimetallic nanodendrite-decorated molybdenum disulfide (MoS2) nanosheets (Au@Pt/MoS2). Transmission electron microscopy (TEM) and high-resolution TEM exhibited that Au@Pt core-shell nanostructures were dispersed onto the surface of MoS2 nanosheets. More importantly, the thickness of the Pt shell of the Au@Pt bimetallic nanodendrites on the surface of the MoS2 nanosheets could be easily tuned via simply changing the synthesis parameters, such as the concentration of H2PtCl6, reaction time and temperature, which greatly influence the catalytic ability of Au@Pt/MoS2 nanohybrids. Both cyclic voltammetry (CV) and chronoamperometry (CA) demonstrated that the as-prepared Au@Pt/MoS2 nanohybrids possessed much higher electrocatalytic activity and stability than Pt/MoS2 or commercial Pt/C catalyst. The peak current mass density of the selected Au@Pt/MoS2 was 6.24 A mg-1, which was 3389 and 20.3 times those of Pt/C (0.00184 A mg-1) and Pt/MoS2 (0.307 A mg-1), respectively. The presented method may be a facile approach for the synthesis of MoS2-supported bimetallic nanocomposites, which is significant for the development of high performance MoS2-based sensors and catalysts.Herein, we presented a facile seeded growth method to prepare high-quality three-dimensional (3D) Au@Pt bimetallic nanodendrite-decorated molybdenum disulfide (MoS2) nanosheets (Au@Pt/MoS2). Transmission electron microscopy (TEM) and high-resolution TEM exhibited that Au@Pt core-shell nanostructures were dispersed onto the surface of MoS2 nanosheets. More importantly, the thickness of the Pt shell of the Au@Pt bimetallic nanodendrites on the surface of the MoS2 nanosheets could be easily tuned via simply changing the synthesis parameters, such as the concentration of H2PtCl6, reaction time and temperature, which greatly influence the catalytic ability of Au@Pt/MoS2 nanohybrids. Both cyclic voltammetry (CV

Pt_xGd alloy formation on Pt(111): Preparation and structural characterization

DEFF Research Database (Denmark)

Ulrikkeholm, Elisabeth Therese; Pedersen, Anders Filsøe; Vej-Hansen, Ulrik Grønbjerg

2016-01-01

(ring operator)C. The LEED and synchrotron XRD experiments have shown that a slightly compressed (2 ×2) alloy appear. The alloy film followed the orientation of the Pt(111) substrate half the time, otherwise it was rotated by 30(ring operator). The TPD spectra show a well-defined peak shifted down 200...

Pt and PtRu catalyst bilayers increase efficiencies for ethanol oxidation in proton exchange membrane electrolysis and fuel cells

Science.gov (United States)

Altarawneh, Rakan M.; Pickup, Peter G.

2017-10-01

Polarization curves, product distributions, and reaction stoichiometries have been measured for the oxidation of ethanol at anodes consisting of Pt and PtRu bilayers and a homogeneous mixture of the two catalysts. These anode structures all show synergies between the two catalysts that can be attributed to the oxidation of acetaldehyde produced at the PtRu catalyst by the Pt catalyst. The use of a PtRu layer over a Pt layer produces the strongest effect, with higher currents than a Pt on PtRu bilayer, mixed layer, or either catalyst alone, except for Pt at high potentials. Reaction stoichiometries (average number of electrons transferred per ethanol molecule) were closer to the values for Pt alone for both of the bilayer configurations but much lower for PtRu and mixed anodes. Although Pt alone would provide the highest overall fuel cell efficiency at low power densities, the PtRu on Pt bilayer would provide higher power densities without a significant loss of efficiency. The origin of the synergy between the Pt and PtRu catalysts was elucidated by separation of the total current into the individual components for generation of carbon dioxide and the acetaldehyde and acetic acid byproducts.

A theranostic prodrug delivery system based on Pt(IV) conjugated nano-graphene oxide with synergistic effect to enhance the therapeutic efficacy of Pt drug.

Science.gov (United States)

Li, Jingwen; Lyv, Zhonglin; Li, Yanli; Liu, Huan; Wang, Jinkui; Zhan, Wenjun; Chen, Hong; Chen, Huabing; Li, Xinming

2015-05-01

Due to their high NIR-optical absorption and high specific surface area, graphene oxide and graphene oxide-based nanocomposites have great potential in both drug delivery and photothermal therapy. In the work reported herein we successfully integrate a Pt(IV) complex (c,c,t-[Pt(NH3)2Cl2(OH)2]), PEGylated nano-graphene oxide (PEG-NGO), and a cell apoptosis sensor into a single platform to generate a multifunctional nanocomposite (PEG-NGO-Pt) which shows potential for targeted drug delivery and combined photothermal-chemotherapy under near infrared laser irradiation (NIR), and real-time monitoring of its therapeutic efficacy. Non-invasive imaging using a fluorescent probe immobilized on the GO shows an enhanced therapeutic effect of PEG-NGO-Pt in cancer treatment via apoptosis and cell death. Due to the enhanced cytotoxicity of cisplatin and the highly specific tumor targeting of PEG-NGO-Pt at elevated temperatures, this nanocomposite displays a synergistic effect in improving the therapeutic efficacy of the Pt drug with complete destruction of tumors, no tumor recurrence and minimal systemic toxicity in comparison with chemotherapy or photothermal treatment alone, highlighting the advantageous effects of integrating Pt(IV) with GO for anticancer treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Does one-dimensional (1D) adatom and cluster diffusion of Pt on the Pt(110)-(1 x 2) surface lead to 1D ripening?

International Nuclear Information System (INIS)

Linderoth, T R; Horch, S; Petersen, L; Laegsgaard, E; Stensgaard, I; Besenbacher, F

2005-01-01

The technique of scanning tunnelling microscopy (STM) uniquely allows dynamic processes on surfaces to be followed directly in real space and at atomic resolution. Results for the 551225 surface diffusion of Pt adatoms and clusters on the anisotropic, missing row reconstructed Pt(110)-(1 x 2) surface are briefly reviewed. Mass transport in this system is entirely one-dimensional (1D) since, at low adatom coverage, atoms and clusters are confined to the missing row troughs. In this paper, we therefore address the question if Pt/Pt(110)-(1 x 2) is a 1D model system to study late stage growth phenomena such as island ripening? From STM measurements, we quantify the morphology changes resulting from annealing a surface configuration with small 1D Pt islands in the missing row troughs to temperatures in the interval 369-395 K. Interestingly, the resulting increase in island sizes (ripening) cannot be accounted for by the known island and adatom mobilities within a 1D model. An explanation is provided from dynamic, time-resolved 'STM-movies' that directly reveal two novel island-mediated mechanisms for inter-trough mass transport which cause the Pt/Pt(110)-(1 x 2) system not to be purely 1D at the higher surface coverage used in the annealing experiments

Comparison of different promotion effect of PtRu/C and PtSn/C electrocatalysts for ethanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Li, Huanqiao; Cao, Lei [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Graduate School of the Chinese Academy Sciences, Beijing 100039 (China); Sun, Gongquan; Jiang, Luhua [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Xin, Qin [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

2007-08-01

Well dispersed PtSn/C, PtRu/C and Pt/C electrocatalysts were synthesized by a modified polyol process and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and inductively coupled plasma-atomic emission spectrometry techniques. XRD patterns show that Ru induces the contraction of Pt lattice parameter while Sn makes the Pt crystal lattice extended. Ethanol oxidation activities on the catalysts were studied via cyclic voltammetry (CV) and chronoamperometry (CA) methods at room temperature. It is found that the electrode potential plays an important role in the electrochemical behavior of ethanol oxidation on PtRu/C and PtSn/C catalysts. In the lower potential region, PtSn/C possesses higher performance for ethanol oxidation, while in the higher potential region PtRu/C is more active. The different promotion effects of PtSn/C and PtRu/C to ethanol oxidation can be explained by the structural effect and modified bi-functional mechanism in different potential region. Single cell test of a direct ethanol fuel cell (DEFC) was also carried out to elucidate the promotion effect of PtRu/C and PtSn/C catalysts on the ethanol oxidation at 90 C. (author)

Comparison of different promotion effect of PtRu/C and PtSn/C electrocatalysts for ethanol electro-oxidation

International Nuclear Information System (INIS)

Li, Huanqiao; Sun, Gongquan; Cao, Lei; Jiang, Luhua; Xin, Qin

2007-01-01

Well dispersed PtSn/C, PtRu/C and Pt/C electrocatalysts were synthesized by a modified polyol process and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and inductively coupled plasma-atomic emission spectrometry techniques. XRD patterns show that Ru induces the contraction of Pt lattice parameter while Sn makes the Pt crystal lattice extended. Ethanol oxidation activities on the catalysts were studied via cyclic voltammetry (CV) and chronoamperometry (CA) methods at room temperature. It is found that the electrode potential plays an important role in the electrochemical behavior of ethanol oxidation on PtRu/C and PtSn/C catalysts. In the lower potential region, PtSn/C possesses higher performance for ethanol oxidation, while in the higher potential region PtRu/C is more active. The different promotion effects of PtSn/C and PtRu/C to ethanol oxidation can be explained by the structural effect and modified bi-functional mechanism in different potential region. Single cell test of a direct ethanol fuel cell (DEFC) was also carried out to elucidate the promotion effect of PtRu/C and PtSn/C catalysts on the ethanol oxidation at 90 o C

Suppression of slow capacitance relaxation phenomenon in Pt/Ba0.3Sr0.7TiO3/Pt thin film ferroelectric structures by annealing in oxygen atmosphere

KAUST Repository

Altynnikov, A. G.; Gagarin, A. G.; Gaidukov, M. M.; Tumarkin, A. V.; Petrov, P. K.; Alford, N.; Kozyrev, A. B.

2014-01-01

The impact of oxygen annealing on the switching time of ferroelectric thin film capacitor structures Pt/Ba0.3Sr0.7TiO3/Pt was investigated. The response of their capacitance on pulsed control voltages before and after annealing was experimentally

FePt magnetic particles prepared by surfactant-assisted ball milling

Energy Technology Data Exchange (ETDEWEB)

Velasco, V., E-mail: vvjimeno@fis.ucm.es [Instituto de Magnetismo Aplicado, UCM-ADIF-CSIC, P.O. Box 155, Las Rozas 28230 (Spain); Departamento de Física de Materiales, Universidad Complutense de Madrid, Madrid 28040 (Spain); Hernando, A.; Crespo, P. [Instituto de Magnetismo Aplicado, UCM-ADIF-CSIC, P.O. Box 155, Las Rozas 28230 (Spain); Departamento de Física de Materiales, Universidad Complutense de Madrid, Madrid 28040 (Spain)

2013-10-15

High-energy ball milling of Fe and Pt elemental powders has been carried out under dry and wet (in presence of solvent and surfactants) conditions. Dry milling leads to the formation of the disordered FCC-FePt alloy whereas by the wet milling procedure the main process is the decrease of Fe and Pt particle size, although some dissolution of Pt into Fe grains cannot be ruled out, and no hint of the formation of the FCC-FePt phase is observed even to milling times up to 20 h, as X-ray diffraction, electron microscopy and Mössbauer spectroscopy indicates. The as-milled particles were annealed at 600 °C for 2 h under Ar atmosphere. It is noticed that the disordered fcc-FePt phase observed in particles milled under dry conditions transform to ordered fct phase characterized by a hard magnetic behavior with a coercive field up to 10,000 Oe. However, those particles milled in the surfactant/solvent medium exhibit a soft magnetic behavior with a coercive field of 600 Oe. These results indicate that wet high-energy ball milling is not an adequate technique for obtaining single-phase FePt particles. - Highlights: • FePt particles have been obtained by high-energy ball milling. • In the presence of surfactants and solvents, almost no alloying process takes place. • After annealing, the coercive field of the FePt alloy particles increases from 150 Oe to 10,000 Oe.

FePt and CoPt nanoparticles prepared by micellar method. Effects of A1{yields}L1{sub 0} transition on oxidation resistance and magnetic properties

Energy Technology Data Exchange (ETDEWEB)

Han, Luyang

2011-02-15

In this thesis FePt and CoPt alloy nanoparticles are prepared with reverse micelles. The metallic nanoparticles with diameters of 2-12 nm and interparticle distances of 20-140 nm are obtained on Si substrates. The magnetic properties of FePt and CoPt nanoparticles as well as oxidation behavior of FePt nanoparticles are investigated. X-ray magnetic circular dichroism (XMCD) measurements on 5.8 nm FePt nanoparticles after hydrogen plasma reduction at 300 C reveals that the magnetic moment per Fe atom and magnetic anisotropy energy match chemically disordered FePt in A1 phase. Annealing at 650 C transform portion of FePt particles to chemically ordered L1{sub 0} phase. The presense of nanoparticles in L1{sub 0} phase is identified by high-resolution transmission electronmicroscopy (HRTEM) investigation, where it is also observed that large fraction of the particles contain defects such as twin boundaries and stacking faults. By increasing the annealing temperature or prolonging annealing time, ratio of transformed particles increases. The average magnetic anisotropy energy of the transformed particles is below 30% of the value of bulk FePt in L1{sub 0} phase. Annealing at above 750 C, however, decreases the average magnetic anisotropy in the sample. Similar A1 {yields} L1{sub 0} transition is observed in FePt nanoparticles with different diameters as well as in CoPt nanoparticles. The spin moment of Fe in FePt nanoparticles decreases with smaller particle diameter, while the orbital moment stays almost constant. Magnetic moments at room temperature are significantly reduced compared to those at low temperature, suggesting the Curie temperatures in FePt and CoPt nanoparticles are significantly lower than in the bulk. The annealing also induces Pt segregation towards the surface in FePt nanoparticles, which is identified by the decreased apparent Fe content measured by X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). The segregation of Pt

Crafting New Business Strategy in Indonesia's Fertilizer Company ( Case Study in PT XYZ)

OpenAIRE

Faswara, Lufan Nassya; Toha, Mohamad

2012-01-01

Fertilizer is the important product in Indonesia. The growth of Indonesia's is highly depending on the supply of fertilizer. PT XYZ is one of the national fertilizer company in Indonesia. PT XYZ is a subsidiary company of a State Owned Enterprise (BUMN) in Indonesia which engaged in fertilizer production and distribution. PT XYZ is the first fertilizer company in Indonesia with objectives to supply fertilizer products to Indonesian farmers. This time, PT XYZ is facing problems in achieving it...

Pt-Si Bifunctional Surfaces for CO and Methanol Electro-Oxidation

DEFF Research Database (Denmark)

Permyakova, Anastasia A.; Han, Binghong; Jensen, Jens Oluf

2015-01-01

and storage. Here we report on Pt-Si bulk samples prepared by arc-melting, for the first time, with high activities toward the electro-oxidation of CO and methanol. Increasing the Si concentration on the surface was correlated with the shifts of onset oxidation potentials to lower values and higher activities...... for CO and methanol electro-oxidation. It is proposed that the reaction on the Pt-Si catalyst could follow a Langmuir-Hinshelwood type of mechanism, where substantially enhanced catalytic activity is attributed to the fine-tuning of the surface Pt-Si atomic structure....

SFG study of methanol dissociative adsorption at Pt(1 0 0), Pt(1 1 0) and Pt(1 1 1) electrodes surfaces

Science.gov (United States)

Vidal, F.; Busson, B.; Six, C.; Pluchery, O.; Tadjeddine, A.

2002-04-01

The Pt( hkl)/methanol in acidic solution interface which constitutes a model of the anodic part of a fuel cell is studied by infrared-visible sum frequency generation vibrational spectroscopy. Methanol dissociative adsorption leads to CO poisoning of the Pt electrode surfaces. The structure of the CO/Pt( hkl) interface depends strongly on the orientation of the surface electrode.

Strategic Alliance Between PT Dirgantara Indonesia and Airbus Millitary (a Case Study of PT Dirgantara Indonesia)

OpenAIRE

Indriyanto, Reza Relen; Wandebori, Harimukti; Astuti, Novika Candra

2013-01-01

PT Dirgantara Indonesia (PT DI) is one of the aircraft manufacturing companies in Indonesia. The tight of competition in aerospace industry needs to improve its performance to gain niche market. Therefore, Ministry State of Own Enterprises has instructed PT Perusahaan Pengelola Aset (PT PPA) and PT DI to restructure and revitalize company with supported by Airbus Military as a strategic alliance partner, in order to increase the performance of production capacity, aircraft sales, and financia...

Engineering the Activity and Stability of Pt-Alloy Cathode Fuel-Cell Electrocatalysts by Tuning the Pt-Pt Distance

DEFF Research Database (Denmark)

Escribano, Maria Escudero; Malacrida, Paolo; Vej-Hansen, Ulrik Grønbjerg

2014-01-01

for enhancing the cathode activity is to alloy Pt with transition metals [1-2]. However, alloys of Pt and late transition metals are typically unstable under fuel-cell conditions. Herein, we present experimental and theoretical studies showing the trends in activity and stability of novel cathode catalysts...

Magnetic Properties and Microstructure of FeOx/Fe/FePt and FeOx/FePt Films

Directory of Open Access Journals (Sweden)

Jai-Lin Tsai

2013-01-01

Full Text Available The Fe(6 nm/FePt film with perpendicular magnetization was deposited on the glass substrate. To study the oxygen diffusion effect on the coupling of Fe/FePt bilayer, the plasma oxidation with 0.5~7% oxygen flow ratio was performed during sputtered part of Fe layer and formed the FeOx(3 nm/Fe(3 nm/FePt trilayer. Two-step magnetic hysteresis loops were found in trilayer with oxygen flow ratio above 1%. The magnetization in FeOx and Fe/FePt layers was decoupled. The moments in FeOx layer were first reversed and followed by coupled Fe/FePt bilayer. The trilayer was annealed again at 500°C and 800°C for 3 minutes. When the FeOx(3 nm/Fe(3 nm/FePt trilayer was annealed at 500°C, the layers structure was changed to FeOx(6 nm/FePt bilayer due to oxygen diffusion. The hard-magnetic FeOx(6 nm/FePt film was coupled with single switching field. The FeOx/(disordered FePt layer structure was observed with further annealing at 800°C and presented soft-magnetic loop. In summary, the coupling between soft-magnetic Fe, FeOx layer, and hard-magnetic L10 FePt layer can be controlled by the oxygen diffusion behavior, and the oxidation of Fe layer was tuned by the annealing temperature. The ordered L10 FePt layer was deteriorated by oxygen and became disordered FePt when the annealed temperature was up to 800°C.

Novel synthesis of core-shell Au-Pt dendritic nanoparticles supported on carbon black for enhanced methanol electro-oxidation

Science.gov (United States)

Cao, Ribing; Xia, Tiantian; Zhu, Ruizhi; Liu, Zhihua; Guo, Jinming; Chang, Gang; Zhang, Zaoli; Liu, Xiong; He, Yunbin

2018-03-01

Core-shell Au-Pt dendritic nanoparticles (Au-Pt NPs) has been synthesized via a facile seed-mediated growth method, in which dendritic Pt nanoparticles as shell grow on the surface of gold nanocores by using ascorbic acid (AA) as "green" reducing reagents. The morphologies and compositions of the as-prepared nanocomposites with core-shell structure are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Electrochemical experiments, including cyclic voltammetry (CV) and chronoamperometry (CA) are performed to investigate the electrocatalytic properties of the Au-Pt NPs loaded carbon black composites (Au-Pt NPs/V) towards methanol oxidation in an alkaline solution. It is found that the reduction time of AA could regulate the thickness and amount of Pt on the Au nanocores, which significantly affect catalytic activity of the Au-Pt NPs/V toward methanol oxidation. Au-Pt NPs/V with optimum reduction time 4 h exhibit 2.3-times higher electrocatalytic activity than that of a commercial catalyst (Pt/carbon black) and an excellent CO tolerance toward methanol oxidation. This behavior is attributed to large active electrochemical area of the bimetallic nanocomposites and the change in the electronic structure of Pt when Au surface modified with fewer Pt nanoparticles.

Chemonuclear studies for identification for new production routes for the therapeutically useful radionuclides {sup 140}Nd, {sup 192}Ir, {sup 191}Pt, {sup 193m}Pt, und {sup 195m}Pt; Kernchemische Studien zur Entwicklung neuerer Produktionsverfahren fuer die therapierelevanten Radionuklide {sup 140}Nd, {sup 192}Ir, {sup 191}Pt, {sup 193m}Pt, und {sup 195m}Pt

Energy Technology Data Exchange (ETDEWEB)

Hilgers, K.

2005-12-15

New production routes for the therapeutically useful radionuclides {sup 140}Nd, {sup 192}Ir, {sup 191}Pt, {sup 193m}Pt and {sup 195m}Pt were investigated. Cross section data were measured using the stacked-foil technique and compared with theoretical calculations. A production method for the platinum nuclides was developed. The {sup 141}Pr(p, 2n){sup 140}Nd and {sup nat}Ce({sup 3}He, xn){sup 140}Nd reactions were investigated for production of {sup 140}Nd. Cross section data of nuclear reactions leading to the side products {sup 141}Nd, {sup 139}Nd and {sup 139}Ce could also be achieved. The experimental data were compared with theoretical calculations using the code ALICE-IPPE. A comparison of the calculated thick target yields showed that the {sup 141}Pr(p, 2n){sup 140}Nd reaction gives a higher yield. The {sup 192}Os(p, n){sup 192}Ir reaction was examined in the context of the production of {sup 192}Ir. Cross section data were determined and compared with theoretical calculations using the codes ALICE-IPPE and EMPIRE II. The yield of this reaction was compared with the yield of the reactor production of this nuclide. The reactor production seems to be more suitable because of a higher purity and yield. Cross section data were measured for the {sup 192}Os({alpha}, n){sup 195m}Pt, {sup 192}Os({alpha}, 3n){sup 193m}Pt and {sup 192}Os({sup 3}He, 4n){sup 191}Pt reactions. The activity of {sup 193m}Pt and {sup 195m}Pt was determined by X-ray spectroscopy after a chemical separation procedure. The ALICE-IPPE code was found to be inappropriate to reproduce the experimental values. The calculated yields were compared with the yields of other reactions, especially the reactor production of {sup 195m}Pt. The yield of the {sup 192}Os({alpha}, n){sup 195m}Pt reaction is lower compared to the yield of the reactor production, but offers lower target costs and higher specific activity. A production method for {sup 193m}Pt and {sup 195m}Pt was developed. Batch yields of 0.9 MBq

PtAUREO1a and PtAUREO1b knockout mutants of the diatom Phaeodactylum tricornutum are blocked in photoacclimation to blue light.

Science.gov (United States)

Mann, Marcus; Serif, Manuel; Jakob, Torsten; Kroth, Peter G; Wilhelm, Christian

2017-10-01

Aureochromes are blue light receptors specifically found in photosynthetic Stramenopiles (algae). Four different Aureochromes have been identified in the marine diatom Phaeodactylum tricornutum (PtAUREO 1a, 1b, 1c, and 2). Since blue light is necessary for high light acclimation in diatoms, it has been hypothesized that Aureochromes might play an important role in the light acclimation capacity of diatoms. This hypothesis was supported by an RNAi knockdown line of PtAUREO1a, which showed a phenotype different from wild type cells when grown in either blue or red light. Here, we show for the first time the phenotype and the photoacclimation reaction of TALEN-mediated knockout mutants of PtAUREO1a and PtAUREO1b, clearly proving the necessity of Aureochromes for light acclimation under blue light. However, both mutants do also show specific differences in their respective phenotypes. Hence, PtAUREO1a and 1b are not functionally redundant in photoacclimation to blue light, and their specific contribution needs to be clarified further. Copyright © 2017 Elsevier GmbH. All rights reserved.

Synthesis and characterizations of Pt nanorods on electrospun polyamide-6 nanofibers templates

International Nuclear Information System (INIS)

Nirmala, R.; Navamathavan, R.; Won, Jeong Jin; Jeon, Kyung Soo; Yousef, Ayman; Kim, Hak Yong

2012-01-01

Highlights: ► Electrospun polyamide-6 nanofibers were used as the templates for synthesis Pt nanorods. ► Polyamide-6 nanofibers surfaces were plasma treated to coat Pt. ► High quality Pt nanorods were obtained by calcinations process. ► Pt nanorods with a diameter of few hundred nanometers were obtained. ► Polyamide-6 nanofibers template based Pt nanorods synthesis are a feasible method. - Abstract: We report on the synthesis of platinum (Pt) nanorods by using ultrafine polyamide-6 nanofibers templates produced via electrospinning technique. These ultrafine polyamide-6 nanofibers can be utilized as the templates for growing Pt nanorods after modifying them optimally by plasma passivations. The morphological, structural, optical and electrical properties of the template assisted Pt nanorods were studied by field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), photoluminescence (PL) and current–voltage (I–V) characteristics. The ability to fabricate the ultrafine size controlled Pt nanorods on polyamide-6 templates with optimized growth parameters in real time can be utilized for the variety of technological applications. Therefore, it is possible to obtain high quality with size control Pt nanorods. Once obtaining the high quality metal nanorods on polymer templates, the same can be adapted for the electronic device fabrication.

Atomistic computer simulations of FePt nanoparticles. Thermodynamic and kinetic properties

Energy Technology Data Exchange (ETDEWEB)

Mueller, M.

2007-12-20

In the present dissertation, a hierarchical multiscale approach for modeling FePt nanoparticles by atomistic computer simulations is developed. By describing the interatomic interactions on different levels of sophistication, various time and length scales can be accessed. Methods range from static quantum-mechanic total-energy calculations of small periodic systems to simulations of whole particles over an extended time by using simple lattice Hamiltonians. By employing these methods, the energetic and thermodynamic stability of non-crystalline multiply twinned FePt nanoparticles is investigated. Subsequently, the thermodynamics of the order-disorder transition in FePt nanoparticles is analyzed, including the influence of particle size, composition and modified surface energies by different chemical surroundings. In order to identify processes that reduce or enhance the rate of transformation from the disordered to the ordered state, the kinetics of the ordering transition in FePt nanoparticles is finally investigated by assessing the contributions of surface and volume diffusion. (orig.)

Ethanol electrooxidation on novel carbon supported Pt/SnOx/C catalysts with varied Pt:Sn ratio

International Nuclear Information System (INIS)

Jiang, L.; Colmenares, L.; Jusys, Z.; Sun, G.Q.; Behm, R.J.

2007-01-01

Novel carbon supported Pt/SnO x /C catalysts with Pt:Sn atomic ratios of 5:5, 6:4, 7:3 and 8:2 were prepared by a modified polyol method and characterized with respect to their structural properties (X-ray diffraction (XRD) and transmission electron microscopy (TEM)), chemical composition (XPS), their electrochemical properties (base voltammetry, CO ad stripping) and their electrocatalytic activity and selectivity for ethanol oxidation (ethanol oxidation reaction (EOR)). The data show that the Pt/SnO x /C catalysts are composed of Pt and tin oxide nanoparticles with an average Pt particle diameter of about 2 nm. The steady-state activity of the Pt/SnO x /C catalysts towards the EOR decreases with tin content at room temperature, but increases at 80 deg. C. On all Pt/SnO x /C catalysts, acetic acid and acetaldehyde represent dominant products, CO 2 formation contributes 1-3% for both potentiostatic and potentiodynamic reaction conditions. With increasing potential, the acetaldehyde yield decreases and the acetic acid yield increases. The apparent activation energies of the EOR increase with tin content (19-29 kJ mol -1 ), but are lower than on Pt/C (32 kJ mol -1 ). The somewhat better performance of the Pt/SnO x /C catalysts compared to alloyed PtSn x /C catalysts is attributed to the presence of both sufficiently large Pt ensembles for ethanol dehydrogenation and C-C bond splitting and of tin oxide for OH generation. Fuel cell measurements performed for comparison largely confirm the results obtained in model studies

Biodistribution and dosimetry of 195mPt-cisplatin in normal volunteers

OpenAIRE

Sathekge, M.; Wagener, J.; Smith, S.V.; Soni, N.; Zeevaart, J.R.

2013-01-01

195mPt-cisplatin is regarded as a promising imaging agent for optimizing dosage in patients receiving cisplatin chemotherapy. We investigated the whole-body distribution and radiation dosimetry of 195mPt-cisplatin in humans. Methods: Whole-body scans were obtained up to 144 h after intravenous injection of 112.4 MBq 195mPt-cisplatin in each of five subjects. Blood samples were taken at various times up to 144 h after injection. Urine was collected up to 114 h aft...

Mechanistic studies of formic acid oxidation at polycarbazole supported Pt nanoparticles

International Nuclear Information System (INIS)

Moghaddam, Reza B.; Pickup, Peter G.

2013-01-01

Highlights: •A polycarbazole support decreases the accumulation of adsorbed intermediates on Pt during formic acid oxidation. •Polycarbazole causes a bilayer of Cu to form on Pt nanoparticles during Cu underpotential deposition. •XPS suggests that both of these effects are due to electron donation from the metal (Pt or Cu) into the polymer π-system. -- Abstract: Mechanistic aspects of the promotion of formic acid oxidation at Pt nanoparticles supported on a thin layer of polycarbazole (PCZ) have been investigated by voltammetry and X-ray photoelectron spectroscopy (XPS). The Pt nanoparticles were drop coated onto a glassy carbon (GC) electrode coated with a ca. 9 nm layer of electrochemically deposited polycarbazole. After 500 s of formic acid oxidation at 0 V vs. SCE, the current at a GC/PCZ/Pt electrode was 25 times higher than at a GC/Pt electrode. Voltammetry in formic acid free H 2 SO 4 following potentiostatic oxidation of formic acid revealed that there was less accumulation of adsorbed intermediates for the polycarbazole supported Pt nanoparticles than for those deposited directly onto the glassy carbon with, 50% more Pt sites remaining available for the GC/PCZ/Pt electrode relative to the GC/Pt electrode. Independent CO stripping experiments revealed only slight differences, while Cu underpotential deposition surprisingly resulted in the deposition of a ca. two-fold excess of Cu on the polycarbazole supported particles. This observation was supported by XPS which also revealed a second Cu signal at a higher binding energy, suggesting electron donation into the conjugated π system of the polymer. Such an interaction of Pt with the polycarbazole may be responsible for its higher activity for formic acid oxidation

Radiolytic Preparation of Electrocatalysts with Pt-Co and Pt-Sn Nanoparticles for a Proton Exchange Membrane Fuel Cell

Directory of Open Access Journals (Sweden)

Sang Kyum Kim

2014-01-01

Full Text Available Nanosized Pt-Sn/VC and Pt-Co/VC electrocatalysts were prepared by a one-step radiation-induced reduction (30 kGy process using distilled water as the solvent and Vulcan XC72 as the supporting material. While the Pt-Co/VC electrodes were compared with Pt/VC (40 wt%, HiSpec 4000, in terms of their electrocatalytic activity towards the oxidation of H2, the Pt-Co/VC electrodes were evaluated in terms of their activity towards the hydrogen oxidation reaction (HOR and compared with Pt/VC (40 wt%, HiSpec 4000, Pt-Co/VC, and Pt-Sn/VC in a single cell. Additionally, the prepared electrocatalyst samples (Pt-Co/VC and Pt-Sn/VC were characterized by transmission electron microscopy (TEM, scanning electron microscope (SEM, thermogravimetric analysis (TGA, X-ray diffraction (XRD, X-ray photoelectron spectroscopy (XPS, electrochemical surface area (ECSA, and fuel cell polarization performance.

Dynamics of the YSZ-Pt Interface

DEFF Research Database (Denmark)

Bay, Lasse; Jacobsen, Torben

1997-01-01

Yttria stabilized zirconia (YSZ)-Pt point electrodes were examined by linear potential sweep, potential step and impedance measurements at 1000 degrees C in air. Inductive loops and hysteresis phenomena with long relaxation times were found. Atomic force microscopy showed changes of the interface...

Modulation of spin-orbit torque efficiency by thickness control of heavy metal layers in Co/Pt multilayers

Energy Technology Data Exchange (ETDEWEB)

Sethi, P.; Krishnia, S.; Li, S.H.; Lew, W.S., E-mail: wensiang@ntu.edu.sg

2017-03-15

We investigate and quantify spin-orbit torque (SOT) strength by current induced effective in-plane magnetic fields and spin Hall angle (SHA) using AC harmonic Hall voltage measurements techniques on Ta/Pt/Co/Pt/Co/Ta thin film structures. The proposed Co/Pt thin film double stack gives property enhancement on thermal stability and perpendicular magnetization anisotropy strength over the single stack Pt/Co/Ta. In the proposed Co/Pt double stack we observed that increasing the Ta capping thickness to three times enhances the SHA in similar order, consistent with larger spin injection efficiency. Doubling the Pt spacer layer thickness reduces the SHA by nearly 1.4 times, due to partial cancellation of SOT by bottom layer Pt, negating the increase from the top Co/Pt interface. The in-plane current threshold for magnetization switching is lower with the increase of the SHA.

Exchange anisotropy and micromagnetic properties of PtMn/NiFe bilayers

International Nuclear Information System (INIS)

Pokhil, Taras; Linville, Eric; Mao, Sining

2001-01-01

Magnetic microstructure, exchange induced uniaxial and unidirectional anisotropy and structural transformation have been studied in PtMn/NiFe bilayer films and small elements as a function of annealing time. The relationship between the fcc-fct ordering phase transformation in PtMn and the development of exchange induced magnetic properties in PtMn/NiFe bilayers is complicated by the fact that the transformation occurs throughout the entire volume of the PtMn film, while the exchange between the layers is predominantly an interface effect. Consequently, the development of the exchange anisotropy should depend primarily on the character of the structural transformation at the interface between PtMn and NiFe. The purpose of this article is to correlate the volume phase transformation in PtMn to the development of exchange anisotropy and micromagnetic behavior in PtMn/NiFe bilayers. The interface structure can be inferred from the anisotropy and micromagnetic measurements, leading to a model that explains the relationship between the volume and interface transformation structures in PtMn, and magnetic properties of the bilayers. The structure and magnetic properties were characterized by x-ray diffraction, vibrating sample magnetometry, and magnetic force microscopy. [copyright] 2001 American Institute of Physics

Effects of Cr underlayer and Pt buffer layer on the interfacial structure and magnetic characteristics of sputtered FePt films

International Nuclear Information System (INIS)

Sun, A.-C.; Hsu, J.-H.; Huang, H.L.; Kuo, P.C.

2006-01-01

This work develops a new method for growing L1 0 FePt(0 0 1) thin film on a Pt/Cr bilayer using an amorphous glass substrate. Semi-coherent epitaxial growth was initiated from the Cr(0 0 2) underlayer, continued through the Pt(0 0 1) buffer layer, and extended into the L1 0 FePt(0 0 1) magnetic layer. The squareness of the L1 0 FePt film in the presence of both a Cr underlayer and a Pt buffer layer was close to unity as the magnetic field was applied perpendicular to the film plane. The single L1 0 FePt(1 1 1) orientation was observed in the absence of a Cr underlayer. When a Cr underlayer is inserted, the preferred orientation switched from L1 0 FePt(1 1 1) to L1 0 FePt(0 0 1) and the magnetic film exhibited perpendicular magnetic anisotropy. However, in the absence of an Pt intermediate layer, the Cr atoms diffused directly into the FePt magnetic layer and prevented the formation of the L1 0 FePt(0 0 1) preferred orientation. When a Pt buffer layer was introduced between the FePt and Cr underlayer, the L1 0 FePt(0 0 1) peak appeared. The thickness of the Pt buffer layer also substantially affected the magnetic properties and atomic arrangement at the FePt/Pt and Pt/Cr interfaces

Nanocomposite for methanol oxidation: synthesis and characterization of cubic Pt nanoparticles on graphene sheets

Directory of Open Access Journals (Sweden)

Tung-Yuan Yung, Jer-Yeu Lee and Ling-Kang Liu

2013-01-01

Full Text Available We present our recent results on Pt nanoparticles on graphene sheets (Pt-NPs/G, a nanocomposite prepared with microwave assistance in ionic liquid 2-hydroxyethanaminiumformate. Preparation of Pt-NPs/G was achieved without the addition of extra reductant such as hydrazine or ethylene glycol. The Pt nanoparticles on graphene have a cubic-like shape (about 60 wt% Pt loading, Pt-NPs/G and the particle size is 6 ± 3 nm from transmission electron microscopy results. Electrochemical cyclic voltammetry studies in 0.5 M aqueous H2SO4 were performed using Pt-NPs/G and separately, for comparison, using a commercially available electrocatalyst (60 wt% Pt loading, Pt/C. The electrochemical surface ratio of Pt-NPs/G to Pt/C is 0.745. The results of a methanol oxidation reaction (MOR in 0.5 M aqueous H2SO4 + 1.0 M methanol for the two samples are presented. The MOR results show that the ratios of the current density of oxidation (If to the current density of reduction (Ib are 3.49 (Pt-NPs/G and 1.37 (Pt/C, respectively, with a preference by 2.55 times favoring Pt-NPs/G. That is, the tolerance CO poisoning of Pt-NPs/G is better than that of commercial Pt/C.

Benchmarking Pt and Pt-lanthanide sputtered thin films for oxygen electroreduction

DEFF Research Database (Denmark)

Zamburlini, Eleonora; Jensen, Kim Degn; Stephens, Ifan E.L.

2017-01-01

Platinum-lanthanide alloys are very promising as active and stable catalysts for the oxygen reduction reaction (ORR) in low-temperature fuel cells. We have fabricated Pt and Pt5Gd metallic thin films via (co-)sputtering deposition in an ultra-high vacuum (UHV) chamber. The electrochemical ORR...

The association of factor V G1961A (factor V Leiden), prothrombin G20210A, MTHFR C677T and PAI-1 4G/5G polymorphisms with recurrent pregnancy loss in Bosnian women.

Science.gov (United States)

Jusić, Amela; Balić, Devleta; Avdić, Aldijana; Pođanin, Maja; Balić, Adem

2018-08-01

Aim To investigate association of factor V Leiden, prothrombin G20210A, MTHFR C677T and PAI-1 4G/5G polymorphisms with recurrent pregnancy loss in Bosnian women. Methods A total of 60 women with two or more consecutive miscarriages before 20 weeks of gestation with the same partners and without history of known causes or recurrent pregnancy loss were included. A control group included 80 healthy women who had one or more successful pregnancies without history of any complication which could be associated with miscarriages. Genotyping of factor V Leiden, prothrombin G20210A, MTHFR C677T and PAI-1 4G/5G polymorphisms were performed by polymerase chain reaction/restriction fragments length polymorphism method (PCR/RFLP). Results Both factor V Leiden and MTHFR C677T polymorphisms were significantly associated with recurrent pregnancy loss (RPL) in Bosnian women while prothrombin G20210A and PAI-1 4G/5G polymorphisms did not show strongly significant association. Conclusion The presence of thrombophilic polymorphisms may predispose women to recurrent pregnancy loss. Future investigation should be addressed in order to find when carriers of those mutations, polymorphisms should be treated with anticoagulant therapy. Copyright© by the Medical Assotiation of Zenica-Doboj Canton.

Suboptimal Anticoagulant Management in Japanese Patients with Nonvalvular Atrial Fibrillation Receiving Warfarin for Stroke Prevention.

Science.gov (United States)

Hirano, Teruyuki; Kaneko, Hirokazu; Mishina, Sari; Wang, Feng; Morita, Satoshi

2017-10-01

Atrial fibrillation (AF) is the most common cardiac arrhythmia, with increasing prevalence in Japan. Although prothrombin time-international normalized ratio (PT-INR) targets for monitoring warfarin therapy in patients with nonvalvular AF (NVAF) are well defined, real-world patient characteristics and PT-INR levels remain unknown among Japanese patients with NVAF who initiate and continue warfarin (warfarin maintainers) versus those who switch from warfarin to direct oral anticoagulants (DOACs; warfarin switchers). Patients with NVAF receiving oral anticoagulants between February 2013 and June 2015 were identified using a nationwide electronic medical record (EMR) database from 69 hospitals in Japan. Demographics and characteristics of patients, PT-INR, time in therapeutic range (TTR), and frequency in range (FIR) of PT-INR between warfarin maintainers and warfarin switchers were assessed. A total of 1705 patients met inclusion criteria and were examined (1501 warfarin maintainers versus 204 warfarin switchers). CHADS 2 , CHA 2 DS 2 -VASc, and HAS-BLED scores were comparable between groups. However, these scores were significantly higher among warfarin switchers at the time of switching than at the time of warfarin initiation. Furthermore, TTR and FIR of PT-INR were lower in warfarin switchers than in maintainers. Nevertheless, TTR and FIR were below 50% (PT-INR, 1.6-2.6) in both patient groups. In this EMR-based clinical study, patients who switched to DOACs had both poor or inadequate PT-INR control and higher risk factors of stroke. Many patients receiving warfarin did not achieve sufficient PT-INR therapeutic range. DOACs could be recommended in Japanese patients with NVAF with inadequate PT-INR control and increased risk of stroke. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Study of carbon-supported bimetallic PtCu nanoparticles by ASAXS

International Nuclear Information System (INIS)

Bulat, N.V.; Avakyan, L.A; Pryadchenko, V.V.; Srabionyan, V.V.; Belenov, S.V.; Bugaev, L.A.

2017-01-01

Bimetallic platinum-copper nanoparticles on carbon support are studied as a perspective electrochemical catalyst by anomalous small-angle X-ray scattering near the Pt absorption L 3 -edge. The simultaneous fitting of several diffraction patterns measured at different photon energies lead to a satisfactory agreement between experimental and model curves in the assumption of core-shell structure of the particles with Pt-rich shell and Cu-rich core. It is shown that the average size of as prepared nanoparticles is about 6 nm with distribution spread of about ±2 nm and with thickness of Pt-rich shell approximately 1.6 nm. After annealing at 350o C the average size of the particles increased by two times with additional enlargement of the Pt-rich shell thickness. (paper)

PT symmetry breaking in non-central potentials

International Nuclear Information System (INIS)

Levai, G.

2007-01-01

Complete text of publication follows. PT-symmetric systems represent a special example for non-hermitian problems in quantum mechanics. The Hamiltonian of these systems is invariant under the simultaneous action of the P space and T time inversion operations. They resemble hermitian problems in that they typically possess real energy spectrum. However, increasing non-hermiticity, e.g. the imaginary potential component the real energy eigenvalues merge pairwise and turn into complex conjugate pairs and at the same time, the energy eigenstates cease to be eigenstates of the PT operator. The mechanism of this spontaneous breakdown of PT symmetry has been investigated in one spatial dimension, and our aim was to extend these studies to higher dimensions. Assuming that the solutions of the Schroedinger equation -Δψ(r) + V (r)ψ(r) = Eψ(r) can be obtained by the separation of the radial and angular variables, we substitute ψ(r,θ,φ) = r -1 φ(r) sin -1/2 ω(θ)τ(ψ) in (4), where r [0,∞), θ [0,π] and ψ [0,2π]. Further, we assume that the angular components of the wave function satisfy ω' = (P(θ) - p)ω, τ' = (K(ψ) - k)τ, where τ(ψ) has to be defined with periodic boundary conditions. Then the complete three-dimensional problem becomes solvable if the non-central potential takes the form V(r,θ,ψ) = V 0 (r)+ K(ψ)/r 2 sin 2 θ + P(θ)/r 2 - k-1/4/r 2 sin 2 θ. Here V 0 (r) is a central potential appearing in -φ'+[V 0 (r) + 1/r 2 (p - 1/4] φ - Eφ = 0. Note that is formally identical with a conventional radial Schroedinger equation complete with a centrifugal term. In order to solve properly, the state dependence of has to be eliminated, i.e. its dependence on k has to be cancelled by combining the last two terms. This effectively means that has to be solved with a potential P(θ) that contains a sin -2 θ type term. Next we investigate under which conditions the non-central potential exhibits PT symmetry. It is seen that space reflection P : r → -r

Microstructure and magnetic properties of nanocomposite FePt/MgO and FePt/Ag films

International Nuclear Information System (INIS)

Chen, S.C.; Kuo, P.C.; Sun, A.C.; Chou, C.Y.; Fang, Y.H.; Wu, T.H.

2006-01-01

An in-plane magnetic anisotropy of FePt film is obtained in the MgO 5 nm/FePt t nm/MgO 5 nm films (where t=5, 10 and 20 nm). Both the in-plane coercivity (H c- parallel ) and the perpendicular magnetic anisotropy of FePt films are increased when introducing an Ag-capped layer instead of MgO-capped layer. An in-plane coercivity is 3154 Oe for the MgO 5 nm/FePt 10 nm/MgO 5 nm film, and it can be increased to 4846 Oe as a 5 nm Ag-capped layer instead of MgO-capped layer. The transmission electron microscopy (TEM)-energy disperse spectrum (EDS) analysis shows that the Ag mainly distributed at the grain boundary of FePt, that leads the increase of the grain boundary energy, which will enhance coercivity and perpendicular magnetic anisotropy of FePt film

Ultrathin Pt films on Ni(111): Structure determined by surface x-ray diffraction

International Nuclear Information System (INIS)

Robach, O.; Isern, H.; Quiros, C.; Ferrer, S.; Steadman, P.; Peters, K. F.

2003-01-01

The growth of platinum on a nickel (111) single crystal under ultrahigh vacuum conditions was studied using surface x-ray diffraction on the ID03 beamline of the ESRF. Film thickness ranged from one to eight monoatomic layers (ML). Specular reflectivity was used to determine the growth mode and vertical lattice parameter of the Pt film. A two-dimensional (2D) growth up to 1 ML followed by more 3D growth was found. A small expansion of the Pt vertical lattice parameter was found. The Pt in-plane lattice parameter was measured. Its relaxation was found to be very slow, with a residual contraction of 2.3% in an 8-ML-thick film (with respect to bulk Pt). A Ni crystal truncation rod measured before and after growing 1 ML of Pt revealed the presence of a small amount of pseudomorphic Pt, adsorbed on both fcc and hcp sites. The stacking of the (111) Pt planes was investigated by measuring stacking-sensitive Pt diffraction rods. A strong tendency to stacking reversal was found at room temperature, with an amount of 'reversed' Pt about ten times higher than the amount of Pt with the same stacking as the Ni. An eight-layer Ni film on Pt(111) was also studied for comparison

Magnetic resonance imaging of myocardial infarction during prothrombin complex concentrate therapy of hemophilia A

International Nuclear Information System (INIS)

Gruen, D.R.; Winchester, P.H.; Brill, P.W.; Ramirez, E.

1997-01-01

In patients with hemophilia, prothrombin complex concentrates (PCCs) have been successfully used to bypass inhibitors to fctor VIII during bleeding episodes. The use of PCCS, including FEIBA (factor eight inhibitor bypassing activity), has been associated with thromboembolic complications. Myocardial infarction (MI) is a rare but serious complication, reported in 13 previous cases, six in the pediatric age group. In all four patients who died during the acute MI, autopsy revealed extensive myocardial hemorrhage. The hearts of three other patients examined at least 5 months after the acute MI showed no evidence of prior hemorrhage. Magnetic resonance (MR) imaging has been shown to be able to evaluate the sequelae of myocardial infarction in adults with coronary artery disease and in children with Kawasaki syndrome. We report the first case of the used of MR imaging in the evaluation of myocardial damage during the acute stage of a FEIBA-associated MI in a 10-year-old boy. (orig.)

Magnetic resonance imaging of myocardial infarction during prothrombin complex concentrate therapy of hemophilia A

Energy Technology Data Exchange (ETDEWEB)

Gruen, D.R. [Dept. of Radiology, The New York Hospital-Cornell Medical Center, New York, NY (United States); Winchester, P.H. [Dept. of Radiology, The New York Hospital-Cornell Medical Center, New York, NY (United States); Brill, P.W. [Dept. of Radiology, The New York Hospital-Cornell Medical Center, New York, NY (United States); Ramirez, E. [Dept. of Radiology, The New York Hospital-Cornell Medical Center, New York, NY (United States)

1997-03-01

In patients with hemophilia, prothrombin complex concentrates (PCCs) have been successfully used to bypass inhibitors to fctor VIII during bleeding episodes. The use of PCCS, including FEIBA (factor eight inhibitor bypassing activity), has been associated with thromboembolic complications. Myocardial infarction (MI) is a rare but serious complication, reported in 13 previous cases, six in the pediatric age group. In all four patients who died during the acute MI, autopsy revealed extensive myocardial hemorrhage. The hearts of three other patients examined at least 5 months after the acute MI showed no evidence of prior hemorrhage. Magnetic resonance (MR) imaging has been shown to be able to evaluate the sequelae of myocardial infarction in adults with coronary artery disease and in children with Kawasaki syndrome. We report the first case of the used of MR imaging in the evaluation of myocardial damage during the acute stage of a FEIBA-associated MI in a 10-year-old boy. (orig.)

A comparative study of the adsorption and hydrogenation of acrolein on Pt(1 1 1), Ni(1 1 1) film and Pt Ni Pt(1 1 1) bimetallic surfaces

Science.gov (United States)

Murillo, Luis E.; Chen, Jingguang G.

In this study we have investigated the reaction pathways for the decomposition and hydrogenation of acrolein (CH 2dbnd CH-CH dbnd O) on Ni/Pt(1 1 1) surfaces under ultra-high vacuum (UHV) conditions using temperature programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). While gas-phase hydrogenation products are not observed from clean Pt(1 1 1), the subsurface Pt-Ni-Pt(1 1 1), with Ni residing below the first layer of Pt, is active for the self-hydrogenation of the C dbnd O bond to produce unsaturated alcohol (2-propenol) and the C dbnd C bond to produce saturated aldehyde (propanal), with the latter being the main hydrogenation product without the consecutive hydrogenation to saturated alcohol. For a thick Ni(1 1 1) film prepared on Pt(1 1 1), the self-hydrogenation yields for both products are lower than that from the Pt-Ni-Pt(1 1 1) surface. The presence of pre-adsorbed hydrogen further enhances the selectivity toward C dbnd O bond hydrogenation on the Pt-Ni-Pt(1 1 1) surface. In addition, HREELS studies of the adsorption of the two hydrogenation products, 2-propenol and propanal, are performed on the Pt-Ni-Pt(1 1 1) surface to identify the possible surface intermediates during the reaction of acrolein. The results presented here indicate that the hydrogenation activity and selectivity of acrolein on Pt(1 1 1) can be significantly modified by the formation of the bimetallic surfaces.

Pt/C Fuel Cell Catalyst Degradation

DEFF Research Database (Denmark)

Zana, Alessandro

This thesis investigates the degradation behavior of Pt/C catalysts under simulated automotive conditions. By using the “tool box” synthesis method the Pt loading has been changed from low to high Pt loadings, therefore permitting to study the role of Pt on the degradation of high surface area (H...

Half-Lantern Pt(II and Pt(III Complexes. New Cyclometalated Platinum Derivatives

Directory of Open Access Journals (Sweden)

Violeta Sicilia

2014-08-01

Full Text Available The divalent complex [{Pt(bzq(μ-L}2] (1 [Hbzq = benzo[h]quinolone, HL = CF3C4H2N2SH: 4-(trifluoromethylpyrimidine-2-thiol] was obtained from equimolar amounts of [Pt(bzq(NCMe2]ClO4 and 4-(trifluoromethylpyrimidine-2-thiol with an excess of NEt3. The presence of a low intensity absorption band at 486 nm (CH2Cl2, assignable to a metal-metal-to-ligand charge transfer transition (1MMLCT [dσ*(Pt2→π*(bzq], is indicative of the existence of two platinum centers located in close proximity because the rigidity of the half-lantern structure allows the preservation of these interactions in solution. Compound 1 undergoes two-electron oxidation upon treatment with halogens X2 (X2: Cl2, Br2 or I2 to give the corresponding dihalodiplatinum (III complexes [{Pt(bzq(μ-LX}2] (L = CF3C4H2N2S-κN,S; X: Cl 2, Br 3, I 4. Complexes 2–4 were also obtained by reaction of 1 with HX (molar ratio 1:2, 10% excess of HX in THF with yields of about 80% and compound 2 was also obtained by reaction of [{Pt(bzq(μ-Cl}2] with HL (4-(trifluoromethylpyrimidine-2-thiol in molar ratio 1:2 in THF, although in small yield. The X-ray structures of 2 and 3 confirmed the half-lantern structure and the anti configuration of the molecules. Both of them show Pt–Pt distances (2.61188(15 Å 2, 2.61767(16 Å 3 in the low range of those observed in Pt2(III,IIIX2 half-lantern complexes.

Strongly bound excitons in monolayer PtS2 and PtSe2

KAUST Repository

Sajjad, M.; Singh, Nirpendra; Schwingenschlö gl, Udo

2018-01-01

Based on first-principles calculations, the structural, electronic, and optical properties of monolayers PtS2 and PtSe2 are investigated. The bond stiffnesses and elastic moduli are determined by means of the spring constants and strain

Electrochemical oxidation of methanol on Pt/(RuxSn1-xO2 nanocatalyst

Directory of Open Access Journals (Sweden)

Krstajić Mila N.

2013-01-01

Full Text Available The Ru-doped SnO2 powder, (RuxSn1-xO2, with the Sn:Ru atomic ratio of 9:1 was synthesized and used as a support for Pt nanoparticles (30 mass% loading. The (RuxSn1-xO2 support and Pt/(RuxSn1-xO2 catalyst were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy and transmission electron microscopy (TEM. (RuxSn1-xO2 was found to be two-phase material consisting of probably solid solution of RuO2 in SnO2 and pure RuO2. The average Pt particle size determined by TEM was 5.3 nm. Cyclic voltammetry of Pt/(RuxSn1-xO2 indicated good conductivity of the sup-port and displayed usual features of Pt. The results of the electrochemical oxidation of COads and methanol on Pt/(RuxSn1-xO2 were compared with those on commercial Pt/C and PtRu/C catalysts. Oxidation of COads on Pt/(RuxSn1-xO2 starts at less positive potentials than on PtRu/C and Pt/C. Potentiodynamic polarization curves and chronoamperometric curves of methanol oxidation indicated higher initial activity of Pt/(RuxSn1-xO2 catalyst compared to PtRu/C, but also a greater loss in the current density over time. Potentiodynamic stability test of the catalysts revealed that deactivation of the Pt/(RuxSn1-xO2 and Pt/C was primarily caused by the poisoning of Pt surface by the methanol oxidation residues, which mostly occurred during the first potential cycle. In the case of PtRu/C the poisoning of the surface was minor and deactivation was caused by the PtRu surface area loss. [Projekat Ministarstva nauke Republike Srbije, br. ON-172054

Pt and PtRu nanoparticles supported on N-doped carbons as electrocatalysts for methanol electro oxidation

Energy Technology Data Exchange (ETDEWEB)

Pereira, Viviane Santos; Silva, Julio Cesar Martins; Oliveira Neto, Almir; Spinace, Estevam Vitorio, E-mail: viviane_sp_saopaulo@yahoo.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2016-07-01

Full text: Methanol is a liquid transportation fuel that can be produced from fossil or renewable resources. Fuel cells employing methanol directly as fuel (Direct Methanol Fuel Cell - DMFC) are very attractive as power source for portable, mobile and stationary applications [1]. PtRu/C electrocatalyst has been considered the best electrocatalyst for methanol electro-oxidation, however, its performance is strongly dependent on the method of preparation and on the characteristics of the carbon support. N-doped carbons with different N contents (1, 2 and 5 wt%) were prepared by thermal treatment of carbon with urea at 800 deg C. Pt and PtRu nanoparticles were supported on N-doped carbons by coreduction of Pt(IV) and Ru(III) ions using an alcohol-reduction process [2]. The obtained materials were characterized by Energy Dispersive X-ray spectroscopy, X-ray diffraction, Transmission electron microscopy and Cyclic Voltammetry. Pt and PtRu nanoparticles supported on N-doped carbons showed superior performance for methanol electro-oxidation when compared to the materials supported on non-modified carbon and to Pt/C and PtRu/C commercial electrocatalysts. Pt/C and PtRu/C prepared with the carbon modified with 2.5 wt% of N content showed the best activities. (author) [1] Y. Zhou, K. Neyerlin, T.S. Olson, S. Pylypenko, J. Bult, H.N. Dinh, T. Gennett, Z. Shao and R. O'Hayre, Energy Environ. Sci. 3, 1437 (2010); [2] E.V. Spinace, A.Oliveira Neto, T.R.R. Vasconcellos, M. Linardi, J. Power Sources 137, 17 (2004)

The thermodynamic assessment of the As-Pt system and the analysis of the Pt/GaAs interfacial reactions

International Nuclear Information System (INIS)

Li, Mei; Li, Changrong; Wang, Fuming; Zhang, Weijing

2007-01-01

In order to analyze the Pt/GaAs interfacial reaction sequence, the As-Pt binary system was thermodynamically assessed. A consistent thermodynamic data set for the As-Pt binary system have been obtained by means of calculation of phase diagrams (CALPHAD) technology. The intermetallic compound, As 2 Pt, was treated as stoichiometric compound. The gas phase was treated as an ideal mixture. Using the present thermodynamic data set for the As-Pt system and the literatures reported ones for the Ga-Pt and As-Ga systems, the isothermal sections of the As-Ga-Pt system at different temperatures 873 and 298 K were constructed by extending the related binaries. The calculated phase diagrams reproduce the experimental results well. Based on the present optimized data and the phase equilibrium calculation, the interfacial reactions of (bulk Pt)/GaAs and (thin-film Pt)/GaAs couples were analyzed and the phase formation sequences were predicted. The calculation results agree well with the reported experiments

Efficient electrocatalytic performance of thermally exfoliated reduced graphene oxide-Pt hybrid

Energy Technology Data Exchange (ETDEWEB)

Antony, Rajini P., E-mail: raji.anna@gmail.com; Preethi, L.K.; Gupta, Bhavana; Mathews, Tom, E-mail: tom@igcar.gov.in; Dash, S.; Tyagi, A.K.

2015-10-15

Highlights: • Synthesis of Pt–RGO nanohybrids of very high electrochemically active surface area. • Electrocatalytic activity-cum-stability: ∼10 times that of commercial Pt-C catalyst. • TEM confirms narrow size distribution and excellent dispersion of Pt nanoparticles. • SAED and XRD indicate (1 1 1) orientation of Pt nanoparticles. • Methanol oxidation EIS reveal decrease in charge transfer resistance with potential - Abstract: High quality thermally exfoliated reduced graphene oxide (RGO) nanosheets decorated with platinum nanocrystals have been synthesized using a simple environmentally benign process. The electrocatalytic behaviour of the Pt–RGO nanohybrid for methanol oxidation was studied using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. High resolution transmission electron microscopy shows uniform dispersion of Pt nanoparticles of ∼2–4 nm size. X-ray diffraction and selected area diffraction studies reveal (1 1 1) orientation of the platinum nanoparticles. The cyclic voltammetry and chronoamperometry results indicate higher catalytic activity and stability for Pt–RGO compared to commercial Pt-C. The electrochemical active surface area of Pt–RGO (52.16 m{sup 2}/g) is found to be 1.5 times that of commercial Pt-C. Impedance spectroscopy shows different impedance behaviour at different potential regions, indicating change in methanol oxidation reaction mechanism with potential. The reversal of impedance pattern to the second quadrant, at potentials higher than ∼0.40 V, indicates change in the rate determining reaction.

Preparation of PtSnCu/C and PtSn/C electrocatalysts and activation by dealloying processes for ethanol electrooxidation

International Nuclear Information System (INIS)

Crisafulli, Rudy

2013-01-01

PtSnCu/C (with different Pt:Sn:Cu atomic ratios) and PtSn/C (50:50) electrocatalysts were prepared by borohydride (BR) and alcohol-reduction (AR) processes using H 2 PtCl 6 .6H 2 O, SnCl 2 .2H 2 O and CuCl 2 .2H 2 O as metal sources, NaBH 4 and ethylene glycol as reducing agents, 2-propanol and ethylene glycol/water as solvents and carbon black as support. In a further step, these electrocatalysts were activated by chemical (CD) and electrochemical (ED) dealloying processes through acid treatment and thin porous coating technique, respectively. These materials were characterized by energy dispersive X-ray, Xray diffraction, transmission electron microscopy, line scan energy dispersive Xray and cyclic voltammetry. Electrochemical studies for ethanol electro-oxidation were performed by cyclic voltammetry, chronoamperometry and in single Direct Ethanol Fuel Cell using Membrane Electrode Assembly (MEA). The anodic effluents were analysed by gas chromatography. The X-ray diffractograms of the as-synthesized electrocatalysts showed the typical face-centered cubic structure (FCC) of platinum and its alloys. After dealloying, the X-ray diffractograms showed that the Pt FCC structure was preserved. The crystallite sizes of the assynthesized electrocatalysts were in the range of PtSnCu/C (50:40:10) AR/ED > PtSnCu/C (50:10:40) BR/CD. PtSn/C (50:50) BR/CD, PtSnCu/C (50:10:40) BR/CD, PtSnCu/C (50:40:10) AR/CD electrocatalysts and Pt/C BASF, PtSn/C (75:25) BASF commercial electrocatalysts were tested in single Direct Ethanol Fuel Cell. The results showed the following performance for ethanol electro-oxidation: PtSn/C (50:50) BR/CD > PtSnCu/C (50:40:10) AR/CD > PtSnCu/C > PtSn/C (75:25) BASF > PtSnCu/C (50:10:40) BR/CD > Pt/C BASF. (author)

The effects of acclimatization on blood clotting parameters in exertional heat stress.

Science.gov (United States)

Vesić, Zoran; Vukasinović-Vesić, Milica; Dincić, Dragan; Surbatović, Maja; Radaković, Sonja S

2013-07-01

Exertional heat stress is a common problem in military services. Considering the coagulation abnormalities are of major importance in development of severe heat stroke, we wanted to examine changes in hemostatic parameters in soldiers during exertional heat stress test as well as the effects of a 10-day passive or active acclimatization in a climatic chamber. A total of 40 male soldiers with high aerobic capacity performed exertional heat stress test (EHST) either in cool [20 degrees C, 16 degrees C wet bulb globe temperature (WBGT)], or hot (40 degrees C, 29 degrees C, (WBGT) environment, unacclimatized (U) or after 10 days of passive (P) or active (A) acclimatization. Physiological strain was measured by tympanic temperatures (Tty) and heart rates (HR). Platelet count (PC), antithrombin III (AT), and prothrombin time (PT) were assessed in blood samples collected before and immediately after the EHST. EHST in hot conditions induced physiological heat stress (increase in Tty and HR), with a significant increase in prothrombin time in the groups U and A. Platelet counts were significantly higher after the EHST compared to the basic levels in all the investigated groups, regardless environmental conditions and acclimatization state. Antithrombin levels were not affected by EHST whatsoever. In the trained soldiers, physiological heat stress caused mild changes in some serum parameters of blood clotting such as prothrombin time, while others such as antithrombin levels were not affected. Platelet counts were increased after EHST in all groups. A 10-day passive or active acclimatization in climatic chamber showed no effect on parameters investigated.

Preparation of PtSnCu/C and PtSn/C electrocatalysts and activation by dealloying processes for ethanol electrooxidation; Preparacao de eletrocatalisadores PtSnCu/C e PtSn/C e ativacao por processos de dealloying para aplicacao na oxidacao eletroquuimica do etanol

Energy Technology Data Exchange (ETDEWEB)

Crisafulli, Rudy

2013-06-01

PtSnCu/C (with different Pt:Sn:Cu atomic ratios) and PtSn/C (50:50) electrocatalysts were prepared by borohydride (BR) and alcohol-reduction (AR) processes using H{sub 2}PtCl{sub 6}.6H{sub 2}O, SnCl{sub 2}.2H{sub 2}O and CuCl{sub 2}.2H{sub 2}O as metal sources, NaBH{sub 4} and ethylene glycol as reducing agents, 2-propanol and ethylene glycol/water as solvents and carbon black as support. In a further step, these electrocatalysts were activated by chemical (CD) and electrochemical (ED) dealloying processes through acid treatment and thin porous coating technique, respectively. These materials were characterized by energy dispersive X-ray, Xray diffraction, transmission electron microscopy, line scan energy dispersive Xray and cyclic voltammetry. Electrochemical studies for ethanol electro-oxidation were performed by cyclic voltammetry, chronoamperometry and in single Direct Ethanol Fuel Cell using Membrane Electrode Assembly (MEA). The anodic effluents were analysed by gas chromatography. The X-ray diffractograms of the as-synthesized electrocatalysts showed the typical face-centered cubic structure (FCC) of platinum and its alloys. After dealloying, the X-ray diffractograms showed that the Pt FCC structure was preserved. The crystallite sizes of the assynthesized electrocatalysts were in the range of <=2 nm to 3 nm and after dealloying there were no significant variations in sizes. The energy dispersive Xray analysis of the as-synthesized electrocatalysts showed a Pt:Sn and Pt:Sn:Cu atomic ratios similar to the nominal values. After chemical and electrochemical dealloying of the electrocatalysts the ranged Pt:Sn and Pt:Sn:Cu atomic ratios showed that Cu and Sn atoms were removed. However, chemical dealloying process proved to be more efficient for removing Cu and electrochemical dealloying for removing Sn. The line scan energy dispersive X-ray analysis showed that acid and electrochemical treatments were efficient to dealloying Cu and/or Sn superficial atoms of

Further insights into the durability of Pt3Co/C electrocatalysts: Formation of “hollow” Pt nanoparticles induced by the Kirkendall effect

International Nuclear Information System (INIS)

Dubau, L.; Durst, J.; Maillard, F.; Guétaz, L.; Chatenet, M.; André, J.; Rossinot, E.

2011-01-01

Highlights: ► Pt 3 Co/C electrocatalysts for the oxygen reduction reaction. ► During operation in a PEMFC, Co atoms are depleted from the mother electrocatalyst. ► The structure of the Pt–Co/C electrocatalysts in the long-term is determined by a balance between Co surface segregation and formation of oxygenated species from water. ► The presence of Co atoms in the subsurface region severely depreciates the oxygen reduction reaction activity. ► “Hollow” Pt nanoparticles have been detected for the first time in a PEMFC. - Abstract: This paper provides further insights into the degradation mechanisms of nanometer-sized Pt 3 Co/C particles under various proton-exchange membrane fuel cell (PEMFC) operating conditions. We confirm that Co atoms are continuously depleted from the mother Pt 3 Co/C electrocatalyst because they can diffuse from the bulk to the surface of the material. The structure of the Pt–Co/C nanoparticles in the long-term is determined by a balance between Co surface segregation and formation of oxygenated species from water splitting. When the PEMFC is operated at high current density (low cathode potential, below the onset of surface oxide formation from water), a steady-state is reached between the rate of Co dissolution at the surface and Co surface segregation. Consequently, Co and Pt atoms remain homogeneously distributed within the Pt–Co/C particles and the thickness of the Pt-shell is maintained to a small value not detectable by atomic-resolution high-angle annular dark-field scanning transmission electron microscopy. When the PEMFC is operated at low current density (high cathode potential), the formation of surface oxides from water and the resulting “place-exchange” mechanism enhance the rate of diffusion of Co atoms to the surface. Consequently, the fresh Pt 3 Co/C particles form core/shell particles with thick Pt-shells and Co content < 5 at% and, ultimately, “hollow” Pt nanoparticles (Kirkendall effect). To the

Hereditary thrombophilia and recurrent pregnancy loss: a retrospective cohort study of pregnancy outcome and obstetric complications

DEFF Research Database (Denmark)

Lund, M; Nielsen, H S; Hviid, T V

2010-01-01

was found to be associated with FVL/PT mutations. CONCLUSIONS: In the unadjusted analysis, FVL and PT mutations have a negative prognostic impact on the live birth rate in women with RPL; however, when adjusting for significant covariates, the results no longer reach statistical significance. Strong......-mutation carriers and 6 were PT-mutation carriers. The unadjusted live birth rate was 45.7% in FVL/PT carriers versus 63.4% in FVL/PT non-carriers, P = 0.04. The adjusted odds ratio for live birth in FVL/PT carriers was 0.48 (95% CI = 0.23-1.01), P = 0.05. Among the obstetric complications, only excessive bleeding......BACKGROUND: The association among hereditary thrombophilia, recurrent pregnancy loss (RPL) and obstetric complications is yet uncertain. The objective of the study was to assess the prognostic value of the factor V Leiden (FVL) and prothrombin (PT) mutations for the subsequent chance of live birth...

α-NiPt(Al) and phase equilibria in the Ni-Al-Pt system at 1150 deg C

International Nuclear Information System (INIS)

Hayashi, S.; Ford, S.I.; Young, D.J.; Sordelet, D.J.; Besser, M.F.; Gleeson, B.

2005-01-01

The α-NiPt(Al) phase and its associated equilibria in the Ni-Al-Pt system at 1150 deg C were investigated by analyzing equilibrated bulk alloys and the interdiffusion zones of diffusion couples. Phase constitutions, tie-lines and microstructures were determined using a combination of techniques, including high-energy synchrotron X-ray diffraction, scanning electron microscopy and electron probe microanalysis. A large Pt solubility limit was found to exist in the β-NiAl, ∼42 at.%, and in γ'-Ni 3 Al, ∼32 at.%. The α-NiPt(Al) phase was found to have wide Pt solubility range of about 33-60 at.% and to skew along an almost constant Pt/Al ratio of 1.5. The α-NiPt(Al) has an ordered face-centered tetragonal L1 0 crystal structure, with the Al and Pt atoms found to be preferentially located in the corners and prismatic faces, respectively. The temperature dependence of the lattice parameters and unit cell volume of the α phase were also determined

Enhanced methanol electro-oxidation activity of Pt/MWCNTs electro-catalyst using manganese oxide deposited on MWCNTs

International Nuclear Information System (INIS)

Nouralishahi, Amideddin; Khodadadi, Abbas Ali; Mortazavi, Yadollah; Rashidi, Alimorad; Choolaei, Mohammadmehdi

2014-01-01

Highlights: • Promoting effects of manganese oxide (MnO x ) on methanol electro-oxidation over Pt/MWCNTs are studied. • 3.3 times higher activity and improved stability are observed on Pt/MnO x -MWCNTs in MOR. • Both hydrogen spill over and bi-functional mechanism are facilitated in presence of MnO x . • MnO x significantly enhances electrochemical active surface area and dispersion of Pt nanoparticles. • Proton conductivity of electrocatalyst layer is improved upon MnO x incorporation. - Abstract: Electro-oxidation of methanol on platinum nanoparticles supported on a nanocomposite of manganese oxide (MnO x ) and multi-wall carbon nanotubes (MWCNTs) is investigated. The morphology, structure, and chemical composition of the electro-catalysts are characterized by TEM, XRD, EDS, TGA, and H 2 -TPR. The electro-catalytic properties of electrodes are examined by cyclic voltammetry, CO-stripping, electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV). Compared to Pt/MWCNTs, the Pt/MnO x -MWCNTs electro-catalyst exhibits about 3.3 times higher forward peak current density, during cyclic voltammetry, and 4.6 times higher exchange current density in methanol electro-oxidation reaction. In addition, deposition of manganese oxide onto MWCNTs dramatically increases the electrochemical active surface area from 29.7 for Pt/MWCNTs to 89.4 m 2 g −1 Pt for Pt/MnO x -MWCNTs. The results of long-term cyclic voltammetry show superior stability of Pt nanoparticles upon addition of manganese oxide to the support. Furthermore, the kinetics of formation of the chemisorbed OH groups improves upon manganese oxide incorporation. This leads to a lower onset potential of CO ads oxidation on Pt/MnO x -MWCNTs than on Pt/MWCNTs

Phenotypic presentation of thrombophilia in double heterozygote for factor v leiden and prothrombin 20210 G>A mutations: Case report

Directory of Open Access Journals (Sweden)

Nagorni-Obradović Ljudmila

2014-01-01

Full Text Available Physicians usually do not suspect pulmonary thromboembolism in younger patients except in those who have thrombophilia. In those latter patients some special conditions such as trauma or surgery may provoke the disease. In some adult persons, thrombophilia may still remain unrecognized, until appearance of additional conditions influence development of thrombosis. A 55-year-old Caucasian female, non-smoker, experienced sudden chest pain and hemoptysis without chest trauma. History taking revealed type 2 diabetes mellitus and hypothyroidism. She was overweight with body mass index 29.0. The review of the family history revealed that her father and mother died of brain infarction, while her 22-year-old son and 24-year-old daughter were healthy. Due to suspicion for thrombosis, multi-slice computerized tomography thorax scan was done and pulmonary embolism was diagnosed. Although without clear risk factor for thrombosis in our patient, we performed laboratory investigation for congenital thrombophilia. Genetic analysis showed double heterozygous for factor V Leiden and prothrombin 20210 G>A mutations. Congenital thrombophilia was risk factor for thrombosis in our patient but haemostatic imbalance was not previously clinically recognized. She had two pregnancies without complications. Appearance of other associative factors such as endocrine disorders - hypothyroidism and metabolic syndrome with diabetes type 2, and overweigh were additional potential triggers for clinical manifestation of pulmonary thromboembolism in her adult age. Her children underwent genetic analysis, too. The son was also double heterozygous for factor V Leiden and prothrombin 20210 G>A mutations, while daughter was heterozygous for factor V Leiden, and none had clinical signs of thrombosis. [Projekat Ministarstva nauke Republike Srbije, br. ON175081 i br. ON 175091

Nanocrystalline Fe-Pt alloys. Phase transformations, structure and magnetism

Energy Technology Data Exchange (ETDEWEB)

Lyubina, J.V.

2006-12-21

This work has been devoted to the study of phase transformations involving chemical ordering and magnetic properties evolution in bulk Fe-Pt alloys composed of nanometersized grains. Nanocrystalline Fe{sub 100-x}Pt{sub x} (x=40-60) alloys have been prepared by mechanical ball milling of elemental Fe and Pt powders at liquid nitrogen temperature. The as-milled Fe-Pt alloys consist of {proportional_to} 100 {mu}m sized particles constituted by randomly oriented grains having an average size in the range of 10-40 nm. Depending on the milling time, three major microstructure types have been obtained: samples with a multilayer-type structure of Fe and Pt with a thickness of 20-300 nm and a very thin (several nanometers) A1 layer at their interfaces (2 h milled), an intermediate structure, consisting of finer lamellae of Fe and Pt (below approximately 100 nm) with the A1 layer thickness reaching several tens of nanometers (4 h milled) and alloys containing a homogeneous A1 phase (7 h milled). Subsequent heat treatment at elevated temperatures is required for the formation of the L1{sub 0} FePt phase. The ordering develops via so-called combined solid state reactions. It is accompanied by grain growth and thermally assisted removal of defects introduced by milling and proceeds rapidly at moderate temperatures by nucleation and growth of the ordered phases with a high degree of the long-range order. In a two-particle interaction model elaborated in the present work, the existence of hysteresis in recoil loops has been shown to arise from insufficient coupling between the low- and the high-anisotropy particles. The model reveals the main features of magnetisation reversal processes observed experimentally in exchange-coupled systems. Neutron diffraction has been used for the investigation of the magnetic structure of ordered and partially ordered nanocrystalline Fe-Pt alloys. (orig.)

Simple preparations of Pd6Cl12, Pt6Cl12, and Qn[Pt2Cl8+n], n=1, 2 (Q=TBA+, PPN+) and structural characterization of [TBA][Pt2Cl9] and [PPN]2[Pt2Cl10].C7H8.

Science.gov (United States)

Dell'Amico, Daniela Belli; Calderazzo, Fausto; Marchetti, Fabio; Ramello, Stefano; Samaritani, Simona

2008-02-04

The hexanuclear Pd6Cl12, i.e., the crystal phase classified as beta-PdCl2, was obtained by reacting [TBA]2[Pd2Cl6] with AlCl3 (or FeCl3) in CH2Cl2. The action of AlCl3 on PtCl42-, followed by digestion of the resulting solid in 1,2-C2H4Cl2 (DCE), CHCl3, or benzene, produced Pt6Cl12.DCE, Pt6Cl12.CHCl3, or Pt6Cl12.C6H6, respectively. Treating [TBA]2[PtCl6] with a slight excess of AlCl3 afforded [TBA][Pt2Cl9], whose anion was established crystallographically to be constituted by two "PtCl6" octahedra sharing a face. Dehydration of H2PtCl6.nH2O with SOCl2 gave an amorphous compound closely analyzing as PtCl4, reactive with [Q]Cl in SOCl2 to yield [Q][Pt2Cl9] or [Q]2[Pt2Cl10], depending on the [Q]Cl/Pt molar ratio (Q=TBA+, PPN+). A single-crystal X-ray diffraction study has shown [PPN]2[Pt2Cl10].C7H8 to contain dinuclear anions formed by two edge-sharing PtCl6 octahedra.

An assessment of the utility of unselected coagulation screening in general hospital practice.

LENUS (Irish Health Repository)

McHugh, Johnny

2011-03-01

Coagulation screening using prothrombin time (PT) and activated partial thromboplastin time (APTT) is widely used. We performed an audit of coagulation screening in an Irish teaching hospital. We analysed PT and\\/or APTT results received during normal working hours during a 1-week period in our hospital. Abnormal results due to anticoagulants were excluded from further study. In samples with PT longer than 15.5 s and\\/or APTT longer than 42 s, we proceeded to 1: 1 mixing studies if the PT was prolonged and 1: 1 mixing studies, factor XII assay and lupus screen if the APTT was prolonged. We also obtained referral source for all samples and clinical details for abnormal samples. Six hundred and seventy-one coagulation requests were received during the study period. Three hundred and eighteen of 671 (47.4%) coagulation requests were for monitoring of anticoagulation. Three hundred and fifty-three of 671 (52.6%) requests were for coagulation screening rather than anticoagulant monitoring. In the coagulation screens received, PT was prolonged in 19 of 353 (5.4%). PT was longer than 20 s in four of 353 cases (1.1%). APTT was prolonged in 19 of 353 (5.4%). APTT was longer than 50 s in four of 353 (1.1%). No patients with abnormal PT or APTT had any bleeding sequelae during the study period. Unregulated coagulation screening has a low yield of abnormal results; the majority of these abnormal results show mild prolongation of PT or APTT with no evidence that they are associated with an increased bleeding risk.

Synthesis of Ag or Pt Nanoparticles by Hydrolysis of Either Ag2Na or PtNa

Directory of Open Access Journals (Sweden)

Huabin Wang

2008-01-01

Full Text Available Ag and Pt nanoparticles have successfully been synthesized by hydrolysis of either Ag2Na or PtNa at room temperature. The oxidation of sodium in the Pt-Na pellets was much faster than that in the Ag-Na pellets since Pt is a catalyst for H2O formation reaction from hydrogen and oxygen at room temperature. The hydrolysis byproduct, NaOH, has a high solubility and easily is removed. This method offers a simple method of preparing transition metal nanoparticles. The Ag and Pt nanoparticles prepared by this method were crystalline in nature, and spherical in shape with a mean size of around 10 nm.

Synthesis and characterization of FePt/Au core-shell nanoparticles

International Nuclear Information System (INIS)

Presa, P. de la; Multigner, M.; Morales, M.P.; Rueda, T.; Fernandez-Pinel, E.; Hernando, A.

2007-01-01

In this work, the structural and magnetic properties of the gold-coated FePt nanoparticles synthesized from high-temperature solution phase are presented. The amount of gold was optimized to obtain most of the FePt particles coated. The particle diameter increases from 4 to 10 nm as observed by TEM. The magnetic properties are largely affected by the coating. At low temperature, the coercive field Hc of the coated nanoparticles decreases about three times respect to the uncoated and the blocking temperature reduces to the half. The changes of the magnetic behavior are discussed in terms of the effect of the gold atoms at the FePt core surface

Asymptotic properties of solvable PT-symmetric potentials

International Nuclear Information System (INIS)

Levai, G.

2010-01-01

Compete text of publication follows. The introduction of PT-symmetric quantum mechanics generated renewed interest in non-hermitian quantum mechanical systems in the past decade. PT symmetry means the invariance of a Hamiltonian under the simultaneous P space and T time reflection, the latter understood as complex conjugation. Considering the Schroedinger equation in one dimension, this corresponds to a potential with even real and odd imaginary components. This implies a delicate balance of emissive and absorptive regions that eventually manifests itself in properties that typically characterize real potentials, i.e. hermitian systems. These include partly or fully real energy spectrum and conserved (pseudo-)norm. A particularly notable feature of these systems is the spontaneous breakdown of PT symmetry, which typically occurs when the magnitude of the imaginary potential component exceeds a certain limit. At this point the real energy eigenvalues begin to merge pairwise and re-emerge as complex conjugate pairs. Another unusual property of PT-symmetric potentials is that they can, or sometimes have to be defined off the real x axis on trajectories that are symmetric with respect to the imaginary x axis. After more than a decade of theoretical investigations a remarkable recent development was the experimental verification of the existence of PT-symmetric systems in nature and the occurrence of spontaneous PT symmetry breaking in them. The experimental setup was a waveguide containing regions where loss and gain of flux occurred in a set out prescribed by PT symmetry. These experimental developments require the study of PT -symmetric potentials with various asymptotics, in which, furthermore, the complex potential component is finite in its range and/or its magnitude. Having in mind that PT symmetry allows for a wider variety of asymptotic properties than hermeticity, we studied three exactly solvable PT-symmetric potentials and compared their scattering and bound

Penilaian Saham PT Pembangunan Perumahan Properti Dalam Rangka Initial Public Offering

OpenAIRE

Khoirudin, Rifki

2017-01-01

This research aimed to estimate fair value per share of PT Pembangunan Perumahan Properti Tbk. as a comparison value to the offered price, set at the time of Initial Public Offering (IPO). This research also aimed to determine whether the price offered at the time of IPO was undervalued or overvalued. Information used in this research was in the form of secondary data of PT Pembangunan Perumahan Properti, financial report of comparable companies, and stock prices of comparable companies. The ...

PENILAIAN SAHAM PT PEMBANGUNAN PERUMAHAN PROPERTI DALAM RANGKA INITIAL PUBLIC OFFERING

OpenAIRE

Rifki Khoirudin

2017-01-01

This research aimed to estimate fair value per share of PT Pembangunan Perumahan Properti Tbk. as a comparison value to the offered price, set at the time of Initial Public Offering (IPO). This research also aimed to determine whether the price offered at the time of IPO was undervalued or overvalued. Information used in this research was in the form of secondary data of PT Pembangunan Perumahan Properti, financial report of comparable companies, and stock prices of comparable companies. The ...

Binuclear Pt-Tl bonded complex with square pyramidal coordination around Pt: a combined multinuclear NMR, EXAFS, UV-Vis, and DFT/TDDFT study in dimethylsulfoxide solution.

Science.gov (United States)

Purgel, Mihály; Maliarik, Mikhail; Glaser, Julius; Platas-Iglesias, Carlos; Persson, Ingmar; Tóth, Imre

2011-07-04

The structure and bonding of a new Pt-Tl bonded complex formed in dimethylsulfoxide (dmso), (CN)(4)Pt-Tl(dmso)(5)(+), have been studied by multinuclear NMR and UV-vis spectroscopies, and EXAFS measurements in combination with density functional theory (DFT) and time dependent density functional theory (TDDFT) calculations. This complex is formed following the equilibrium reaction Pt(CN)(4)(2-) + Tl(dmso)(6)(3+) ⇆ (CN)(4)Pt-Tl(dmso)(5)(+) + dmso. The stability constant of the Pt-Tl bonded species, as determined using (13)C NMR spectroscopy, amounts to log K = 2.9 ± 0.2. The (NC)(4)Pt-Tl(dmso)(5)(+) species constitutes the first example of a Pt-Tl bonded cyanide complex in which the sixth coordination position around Pt (in trans with respect to the Tl atom) is not occupied. The spectral parameters confirm the formation of the metal-metal bond, but differ substantially from those measured earlier in aqueous solution for complexes (CN)(5)Pt-Tl(CN)(n)(H(2)O)(x)(n-) (n = 0-3). The (205) Tl NMR chemical shift, δ = 75 ppm, is at extraordinary high field, while spin-spin coupling constant, (1)J(Pt-Tl) = 93 kHz, is the largest measured to date for a Pt-Tl bond in the absence of supporting bridging ligands. The absorption spectrum is dominated by two strong absorption bands in the UV region that are assigned to MMCT (Pt → Tl) and LMCT (dmso → Tl) bands, respectively, on the basis of MO and TDDFT calculations. The solution of the complex has a bright yellow color as a result of a shoulder present on the low energy side of the band at 355 nm. The geometry of the (CN)(4)Pt-Tl core can be elucidated from NMR data, but the particular stoichiometry and structure involving the dmso ligands are established by using Tl and Pt L(III)-edge EXAFS measurements. The Pt-Tl bond distance is 2.67(1) Å, the Tl-O bond distance is 2.282(6) Å, and the Pt-C-N entity is linear with Pt-C and Pt···N distances amounting to 1.969(6) and 3.096(6) Å, respectively. Geometry optimizations on

CO tolerance of PdPt/C and PdPtRu/C anodes for PEMFC

International Nuclear Information System (INIS)

Garcia, Amanda C.; Paganin, Valdecir A.; Ticianelli, Edson A.

2008-01-01

The performance of H 2 /O 2 proton exchange membrane fuel cells (PEMFCs) fed with CO-contaminated hydrogen was investigated for anodes with PdPt/C and PdPtRu/C electrocatalysts. The physicochemical properties of the catalysts were characterized by energy dispersive X-ray (EDX) analyses, X-ray diffraction (XRD) and 'in situ' X-ray absorption near edge structure (XANES). Experiments were conducted in electrochemical half and single cells by cyclic voltammetry (CV) and I-V polarization measurements, while DEMS was employed to verify the formation of CO 2 at the PEMFC anode outlet. A quite high performance was achieved for the PEMFC fed with H 2 + 100 ppm CO with the PdPt/C and PdPtRu/C anodes containing 0.4 mg metal cm -2 , with the cell presenting potential losses below 200 mV at 1 A cm -2 , with respect to the system fed with pure H 2 . For the PdPt/C catalysts no CO 2 formation was seen at the PEMFC anode outlet, indicating that the CO tolerance is improved due to the existence of more free surface sites for H 2 electrooxidation, probably due to a lower Pd-CO interaction compared to pure Pd or Pt. For PdPtRu/C the CO tolerance may also have a contribution from the bifunctional mechanism, as shown by the presence of CO 2 in the PEMFC anode outlet

Sintering of Pt nanoparticles via volatile PtO_2: Simulation and comparison with experiments

International Nuclear Information System (INIS)

Plessow, Philipp N.; Abild-Pedersen, Frank

2016-01-01

It is a longstanding question whether sintering of platinum under oxidizing conditions is mediated by surface migration of Pt species or through the gas phase, by PtO_2(g). Clearly, a rational approach to avoid sintering requires understanding the underlying mechanism. A basic theory for the simulation of ripening through the vapor phase has been derived by Wynblatt and Gjostein. Recent modeling efforts, however, have focused entirely on surface-mediated ripening. In this work, we explicitly model ripening through PtO_2(g) and study how oxygen pressure, temperature, and shape of the particle size distribution affect sintering. On the basis of the available data on α-quartz, adsorption of monomeric Pt species on the support is extremely weak and has therefore not been explicitly simulated, while this may be important for more strongly interacting supports. Our simulations clearly show that ripening through the gas phase is predicted to be relevant. Assuming clean Pt particles, sintering is generally overestimated. This can be remedied by explicitly including oxygen coverage effects that lower both surface free energies and the sticking coefficient of PtO_2(g). Additionally, mass-transport limitations in the gas phase may play a role. Using a parameterization that accounts for these effects, we can quantitatively reproduce a number of experiments from the literature, including pressure and temperature dependence. Lastly, this substantiates the hypothesis of ripening via PtO_2(g) as an alternative to surface-mediated ripening.

Progranulin inhibits platelet aggregation and prolongs bleeding time in rats.

Science.gov (United States)

Al-Yahya, A M; Al-Masri, A A; El Eter, E A; Hersi, A; Lateef, R; Mawlana, O

2018-05-01

Several adipokines secreted by adipose tissue have an anti-thrombotic and anti-atherosclerotic function. Recently identified adipokine progranulin was found to play a protective role in atherosclerosis. Bearing in mind the central role of platelets in inflammation and atherosclerosis, we aimed, in this study, to examine the effect of progranulin on platelet function and coagulation profile in rats. Healthy male albino Wistar rats weighing (250-300 g) were divided into 4 groups. Three groups were given increasing doses of progranulin (0.001 µg, 0.01 µg, and 0.1 µg) intraperitoneally, while the control group received phosphate-buffered saline (PBS). Bleeding time, prothrombin time, activated partial thromboplastin time and platelet aggregation responses to adenosine diphosphate and arachidonic acid were assessed. Administration of progranulin resulted in a significant inhibition of platelet aggregation in response to both adenosine diphosphate, and arachidonic acid. Bleeding time, prothrombin time and activated partial thromboplastin time were significantly prolonged in all groups that received progranulin, in particular, the 0.1 µg dose, in comparison to the control group. This preliminary data is first suggesting that the antiplatelet and anticoagulant action of progranulin could have a physiological protective function against thrombotic disorders associated with obesity and atherosclerosis. However, these results merit further exploration.

PERJANJIAN BOT (BUILD OPERATE AND TRANSFER ANTARA PT. SEAWORLD INDONESIA DENGAN PT PEMBANGUNAN JAYA ANCOL Tbk

Directory of Open Access Journals (Sweden)

Arasina Chandra Adcha Mita

2015-10-01

Full Text Available Cooperation Cooperation BOT build operate and transfer (BOT is a form of cooperation agreements carried out between holders of land rights to the investor which holders of land rights would entitle the investor to erect a building for the duration of the agreement to transfer ownership of the building to holders of land rights after a period ofwake up in order to deliver an end. One form of the agreement made by PT. Jaya Ancol construction with vehicle manager of Sea World for 20 years ended 20 September 2014. This thesis entitled "Agreement Bot (Build Operate And Transfer between PT.Seaworld Indonesia with PT Building Jaya Ancol Tbk ". The purpose of this study was to determine the problems that arise in the implementation of BOT agreement between PT. Sea Wold Indonesia with PT. Jaya Ancol Tbk development and how its completion. The research method using normative juridical approach. Materials research using primary and secondary data, specifications research using descriptive analytical research, libraries and research tools using interviews, interview techniques and research data analysis method by means of qualitative methods. Based on the research that the differences in perception by each of the parties to cause problems in the BOT agreement. PT. Jaya Ancol development assume that the clause 8 subsection 5 of the Agreement between PT. Development Jaya Ancol Tbk and Sea World considers that the current agreement expires, PT. Sea World Indonesia handing back land and building project to PT. Jaya Ancol Tbk development, including supporting infrastructure and its management rights. The guidelines are used as Sea World Indonesia is clause 8 subsection  6 which states PT. Sea World Indonesia, have a perception extend the management for a maximum of 20 years, and shall notify in writing the Jaya Ancol no later than one year agreement period expires. PT. Sea World is obliged to hand over the building and its assets to PT

Dealloyed Pt3Co nanoparticles with higher geometric strain for superior hydrogen evolution reaction

Science.gov (United States)

Saquib, Mohammad; Halder, Aditi

2018-06-01

In the present work, the effect of surface strain in the carbon supported Pt3Co dealloy catalyst towards hydrogen evolution reaction (HER) has been reported. Dealloying process is adopted to generate the geometric strain in Pt3Co/C alloy by preferential dissolution of non-noble metal (Co) from the alloy. The developed geometric strain has been estimated by different microstructural characterization techniques. Electrochemical studies showed that the highest current density for HER was obtained for Pt3Co/C dealloy catalyst and it was nearly 2 and 5 times higher than Pt3Co/C alloy and Pt/C respectively. Tafel slope for HER was improved from 49 (Pt/C) to 34 mV dec-1 (Pt3Co/C dealloy), indicating that the surface strain plays important role in the improvement of the catalytic activity of Pt3Co catalyst. The chronoamperometry data, LSV curves and ECSA values before and after chronoamperometry confirmed that Pt3Co/C dealloy catalyst was a stable as well as a durable electrocatalyst for HER.

Structural properties of Pt/TiO{sub 2}/Pt heterostructure grown on sapphire substrate—Influence of annealing processes

Energy Technology Data Exchange (ETDEWEB)

Roch, Tomas, E-mail: roch@fmph.uniba.sk; Durina, Pavol; Grancic, Branislav; Gregor, Maros; Plecenik, Tomas; Truchly, Martin; Mikula, Marian; Satrapinskyy, Leonid; Kus, Peter; Plecenik, Andrej

2014-09-01

Highlights: • Pt/TiO{sub 2}/Pt, Pt/TiO{sub 2} and TiO{sub 2}/Pt stacks were grown on (c-cut) Al{sub 2}O{sub 3} and annealed at 600 °C. • Pt/TiO{sub 2}/Pt contains both TiO{sub 2}-anatase (27%) and rutile (73%) phases after annealing. • Pt/TiO{sub 2} contains both anatase and rutile, TiO{sub 2}/Pt anatase phase only. • Epitaxial relationship of bottom platinum: Pt(1 1 1)[1–10]||sub(0 0 0 1)[11{sup ¯}00]. • Platinum top layer is uniaxially oriented: Pt(1 1 1)||sub(0 0 0 1). - Abstract: Simple gas sensors based on resistivity change of TiO{sub 2} thin films using combined top and bottom metallic contacts are very promising. In this work influence of ex situ annealing in ambient air on structure of TiO{sub 2} thin film stacked between two platinum contact layers has been studied. The layers were deposited using DC magnetron sputtering on unheated c-cut sapphire substrates. For lowering of the Schottky barrier at the Pt–TiO{sub 2} interfaces and for improved crystalline stability, ex situ annealing at 600 °C in air was carried out. In order to study separately influence of top and bottom platinum layers on crystal structure, also reference samples Pt/TiO{sub 2}/Al{sub 2}O{sub 3} and TiO{sub 2}/Pt/Al{sub 2}O{sub 3} have been prepared. Non-ambient X-ray diffraction measurement during annealing process and X-ray pole figures after annealing has been measured. Near epitaxial relationship was observed for bottom Pt layer grown on c-cut sapphire substrate: Pt(1 1 1)[11{sup ¯}0]||Al{sub 2}O{sub 3}(0 0 0 1)[11{sup ¯}00]. Inner titania layer shows randomly oriented both TiO{sub 2}-rutile (R) and anatase (A) phases with the volumetric ratio of R/A ∼ 2.7. If prepared without top Pt contact layer, the TiO{sub 2} transforms during annealing to random single anatase phase. The TiO{sub 2} layer overgrown with only single Pt top contact layer shows randomly oriented both rutile and anatase phases with volumetric ratio R/A ∼ 2.3. The top Pt layer on TiO{sub 2

Properties and electrochemical behaviors of AuPt alloys prepared by direct-current electrodeposition for lithium air batteries

International Nuclear Information System (INIS)

Zhang, Jinqiu; Li, Da; Zhu, Yiming; Chen, Miaomiao; An, Maozhong; Yang, Peixia; Wang, Peng

2015-01-01

AuPt catalyst has a prospective application in a lithium air battery because of its bi-function on catalyzing Oxygen Reduction Reaction (ORR) and Oxygen Evolution Reaction (OER). Electrodeposition is an in-situ convenient technology for catalyst preparation without chemical residue. In an acid electrolyte, AuPt alloy catalysts were electrodeposited on carbon paper. The effect of main salt concentration, electrodeposition time and current density were studied by deposit micromorphology observation, structure analyses and composition testing. Catalytic abilities of AuPt alloys were measured by cyclic voltammetry (CV) in an ionic liquid of EMI-TFSI/Li-TFSI [1- Ethyl - 3- methylimidazolium–bis (trifluoromethanesulphonyl) imide/lithium–bis (trifluoromethanesulphonyl) imide]. The electrochemical behaviors of Au, Pt and AuPt deposits were also measured. An optimized direct-current electrodeposition process of getting high active AuPt catalyst is concluded, which is an aqueous solution containing 6.7∼10 mmol · L −1 HAuCl 4 , 10∼13.3 mmol · L −1 H 2 PtCl 6 and 0.5 mol · L −1 H 2 SO 4 as the electrolyte, current density of 20mA · cm −2 and electrodeposition time of 8∼34 s. The co-deposition of AuPt alloy is an irregular co-deposition controlled by diffusion, while gold atoms enter the platinum’s crystal lattice in the structure of AuPt alloy. The increase of the concentration of H 2 PtCl 6 in the electrolyte, the extension of the electrodeposition time or the raise of the current density can improve the content of Pt in the deposit. The clusters’ diameters of AuPt catalysts decrease to 150∼250 nm by adjusting current densities during electrodeposition

195Pt and 119Sn Knight shifts of U3Pt3Sn4

International Nuclear Information System (INIS)

Kojima, K.; Takabatake, T.; Harada, A.; Hihara, T.

1995-01-01

The 195 Pt and 119 Sn Knight shifts in U 3 Pt 3 Sn 4 have been measured in the temperature range 4.2-298K. They exhibit Curie-Weiss like behaviors above about 50K and remain constant below about 10K. This suggests that the deviation of χ(T) from the modified Curie-Weiss law is an intrinsic property of U 3 Pt 3 Sn 4 . ((orig.))

Electronic structure, thermodynamic properties and hydrogenation of LaPtIn and CePtIn compounds by ab-initio methods

International Nuclear Information System (INIS)

Jezierski, Andrzej; Szytuła, Andrzej

2016-01-01

The electronic structures and thermodynamic properties of LaPtIn and CePtIn are studied by means of ab-initio full-relativistic full-potential local orbital basis (FPLO) method within densities functional (DFT) methodologies. We have also examined the influence of hydrogen on the electronic structure and stability of CePtInH and LaPtInH systems. The positions of the hydrogen atoms have been found from the minimum of the total energy. Our calculations have shown that band structure and topology of the Fermi surfaces changed significantly during the hydrogenation. The thermodynamic properties (bulk modulus, Debye temperatures, constant pressure heat capacity) calculated in quasi-harmonic Debye-Grüneisen model are in a good agreement with the experimental data. We have applied different methods of the calculation of the equation of states (EOS) (Murnaghan, Birch-Murnaghan, Poirier–Tarantola, Vinet). The thermodynamic properties are presented for the pressure 0< P<9 GPa and the temperature range 0< T<300 K. - Highlights: • Full relativistic band structure of LaPtIn and CePtIn. • Fermi surface of LaPtIn, LaPtInH, CePtIn, CePtInH. • Effect of hydrogenation on the electronic structure of LaPtIn and CePtIn. • Thermodynamic properties in the quasi-harmonic Debye-Grüneisen model.

Investigation of nano Pt and Pt-based alloys electrocatalysts for direct methanol fuel cells and their properties

Directory of Open Access Journals (Sweden)

Chunguang Suo

2014-03-01

Full Text Available The electrocatalysts used in micro direct methanol fuel cell (μDMFC, such as Pt/C and Pt alloy/C, prepared by liquid-phase NaBH4 reduction method have been investigated. XC-72 (Cobalt corp. Company, U.S.A is chosen as the activated carrier for the electrocatalysts to keep the catalysts powder in the range of several nanometers. The XRD, SEM, EDX analyses indicated that the catalysts had small particle size in several nanometers, in excellent dispersed phase and the molar ratio of the precious metals was found to be optimal. The performances of the DMFCs using cathodic catalyst with Pt percentage of 30wt% and different anodic catalysts (Pt-Ru, Pt-Ru-Mo were tested. The polarization curves and power density curves of the cells were measured to determine the optimal alloy composition and condition for the electrocatalysts. The results showed that the micro direct methanol fuel cell with 30wt% Pt/C as the cathodic catalyst and n(Pt:n(Ru:n(Mo = 3:2:2 PtRuMo/C as the anodic catalyst at room temperature using 2.0mol/L methanol solution has the best performances.

Excellent performance of Pt-C/TiO2 for methanol oxidation: Contribution of mesopores and partially coated carbon

Science.gov (United States)

Wu, Xinbing; Zhuang, Wei; Lu, Linghong; Li, Licheng; Zhu, Jiahua; Mu, Liwen; Li, Wei; Zhu, Yudan; Lu, Xiaohua

2017-12-01

Partial deposition of carbon onto mesoporous TiO2 (C/TiO2) were prepared as supporting substrate for Pt catalyst development. Carbon deposition is achieved by in-situ carbonization of furfuryl alcohol. The hybrid catalysts were characterized by XRD, Raman, SEM and TEM and exhibited outstanding catalytic activity and stability in methanol oxidation reaction. The heterogeneous carbon coated on mesoporous TiO2 fibers provided excellent electrical conductivity and strong interfacial interaction between TiO2 support and Pt metal nanoparticles. Methanol oxidation reaction results showed that the activity of Pt-C/TiO2 is 3.0 and 1.5 times higher than that of Pt-TiO2 and Pt-C, respectively. In addition, the Pt-C/TiO2 exhibited a 6.7 times enhanced stability compared with Pt-C after 2000 cycles. The synergistic effect of C/TiO2 is responsible for the enhanced activity of Pt-C/TiO2, and its excellent durability could be ascribed to the strong interfacial interaction between Pt nanoparticles and C/TiO2 support.

Tritium-tracer study of catalytic hydrogenation reaction of ethylene on Ni, Pt and Ni-Pt

International Nuclear Information System (INIS)

Matsuyama, M.; Yasuda, Y.; Takeuchi, T.

1978-01-01

The influence of the pressure of tritiated hydrogen on the rate of the formation of tritiated ethylene, X, and that of tritiated ethane, Z, in the hydrogenation reaction of ethylene on Ni, Pt and Ni-Pt (1:1) alloy catalysts was investigated. The ratio of the rate of the exchange to that of the hydrogenation, selectivity X/Z, decreased markedly with the increase in the pressure of the tritiated hydrogen and the order of X/Z was Ni>Ni-Pt>Pt. These results were interpreted in terms of the difference in the amount of chemisorbed tritium on each metal catalyst. (orig.) [de

Dependence of Magnetic Properties of Co/Pt Multilayers on Deposition Temperature of Pt Buffer Layers

Science.gov (United States)

Shiomi, Shigeru; Nishimura, Tomotaka; Kobayashi, Tadashi; Masuda, Morio

1993-04-01

A 15-nm-thick Pt buffer layer was deposited on a glass slide at temperature Ts(Ptbuf) ranging from 30 to 300°C by e-gun evaporation. Following the cooling in vacuum to ambient temperature, Co and Pt layers have been alternately deposited on it. Very large perpendicular anisotropy and coercivity have been obtained at Ts(Ptbuf) higher than 200°C. The (111) preferred orientation of the Co/Pt multilayer as well as the Pt buffer layer became more pronounced with elevating Ts(Ptbuf), to which the enhancement of perpendicular anisotropy with elevating Ts(Ptbuf) might be ascribable.

Shape resonances and EXAFS scattering in the $Pt L_{2,3}$ XANES from a Pt electrode

CERN Document Server

O'Grady, W E

1999-01-01

Atomic hydrogen and oxygen adsorption on a platinum electrode in H /sub 2/SO/sub 4/ and HClO/sub 4/ electrolytes were studied by Pt L /sub 23/ XANES. The Pt electrode was formed of highly dispersed 1.5-3.0 nm particles supported on $9 carbon. A difference procedure utilizing the L/sub 2/ and L/sub 3/ spectra at various applied voltages was used to isolate the electronic and geometric effects in the XANES spectra. At 0.54 V (relative to RHE) the Pt electrode in $9 HClO/sub 4/ is assumed to be "clean". By taking the difference between the spectra at 0.0 and 0.54 V, the Pt-H antibonding state (electronic effect) is isolated and found to have a Fano-resonance line shape. In addition, a $9 significant Pt-H EXAFS scattering (geometric effect) was found for photon energies 0 to 20 eV above the edge. The difference between the spectra at 1.14 and 0.54 V allows isolation of the Pt-O antibonding state and the Pt-O EXAFS $9 scattering. (7 refs).

Prothrombin complex concentrate for reversal of vitamin K antagonist treatment in bleeding and non-bleeding patients

DEFF Research Database (Denmark)

Johansen, Mathias; Wikkelsø, Anne; Lunde, Jens

2015-01-01

BACKGROUND: Treatment with vitamin K antagonists is associated with increased morbidity and mortality. Reversal therapy with prothrombin complex concentrate (PCC) is used increasingly and is recommended in the treatment of patients with bleeding complications undertaking surgical interventions......, as well as patients at high risk of bleeding. Evidence is lacking regarding indication, dosing, efficacy and safety. OBJECTIVES: We assessed the benefits and harms of PCC compared with fresh frozen plasma in the acute medical and surgical setting involving vitamin K antagonist-treated bleeding and non...... finding a beneficial effect of PCC in reducing the volume of fresh frozen plasma (FFP) transfused to reverse the effect of vitamin K antagonist treatment. The number of new occurrences of transfusion of red blood cells (RBCs) did not seem to be associated with the use of PCC (RR 1.08, 95% CI 0.82 to 1...

DFT Study of Optical Properties of Pt-based Complexes

Science.gov (United States)

Oprea, Corneliu I.; Dumbravǎ, Anca; Moscalu, Florin; Nicolaides, Atnanassios; Gîrţu, Mihai A.

2010-01-01

We report Density Functional Theory (DFT) calculations providing the geometrical and electronic structures, as well as the vibrational and optical properties of the homologous series of Pt-pyramidalized olefin complexes (CH2)n-(C8H10)Pt(PH3)2, where n = 0, 1, and 2, in their neutral and oxidized states. All complexes were geometry optimized for the singlet ground state in vacuum using DFT methods with B3LYP exchange-correlation functional and the Effective Core Potential LANL2DZ basis set, within the frame of Gaussian03 quantum chemistry package. We find the coordination geometry of Pt to be distorted square planar, with dihedral angles ranging from 0°, for n = 0 and 1, which have C2V symmetry to 3.4°, for n = 2 with C2 symmetry. The Mulliken charge analysis allows a discussion of the oxidation state of the Pt ion. Electronic transitions were calculated at the same level of theory by means of Time Dependant-DFT. For n = 2 the electronic absorption bands are located in the UV region of the spectrum, the transitions being assigned to metal to ligand charge transfers. The relevance of these Pt-based compounds as possible pigments for dye-sensitized solar cells is discussed.

Methanol electro-oxidation and direct methanol fuel cell using Pt/Rh and Pt/Ru/Rh alloy catalysts

International Nuclear Information System (INIS)

Choi, Jong-Ho; Park, Kyung-Won; Park, In-Su; Nam, Woo-Hyun; Sung, Yung-Eun

2004-01-01

Pt-based binary or ternary catalysts containing Rh for use as anodes in direct methanol fuel cells (DMFC) were synthesized by borohydride reduction method combined with freeze-drying. The resulting catalysts had a specific surface area of approximately 65-75 m 2 /g. X-ray diffraction (XRD) patterns indicated that the catalysts were well alloyed and the average size of alloy catalysts was confirmed by transmission electron microscopy (TEM). The Pt/Rh (2:1) and Pt/Ru/Rh (5:4:1) alloy catalysts showed better catalytic activities for methanol electro-oxidation than Pt or Pt/Ru (1:1), respectively

Role of Pt(0) in bimetallic (Pt,Fe)-FER catalysts in the N2O decomposition

Czech Academy of Sciences Publication Activity Database

Tabor, Edyta; Jíša, Kamil; Nováková, Jana; Bastl, Zdeněk; Vondrová, Alena; Závěta, K.; Sobalík, Zdeněk

2013-01-01

Roč. 165, JAN 2013 (2013), s. 40-47 ISSN 1387-1811 R&D Projects: GA ČR GA203/09/1627 Institutional support: RVO:61388955 Keywords : bimetallic Pt,Fe- FER * Pt- FER * Pt(0) clusters Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.209, year: 2013

Preparation of PtRu/Carbon hybrid materials by hydrothermal carbonization: A study of the Pt:Ru atomic ratio

International Nuclear Information System (INIS)

Tusi, Marcelo Marques; Brandalise, Michele; Correa, Olandir Vercino; Oliveira Neto, Almir; Linardi, Marcelo; Spinace, Estevam Vitorio; Villalba, Juan Carlo

2009-01-01

PtRu/Carbon materials with different Pt:Ru atomic ratios (30:70, 50:50, 60:40, 80:20 and 90:10) and 5 wt% of nominal metal load were prepared by hydrothermal carbonization using H 2 PtCl 6.6 H 2 O and RuCl 3. xH 2 O as metals sources and catalysts of the carbonization process and starch as carbon source and reducing agent. The obtained materials were treated at 900 deg C under argon and characterized by EDX, XRD and cyclic voltammetry. The electro-oxidation of methanol was studied by cyclic voltammetry and chronoamperometry using thin porous coating technique. The PtRu/Carbon materials showed Pt:Ru atomic ratios obtained by EDX similar to the nominal ones. XRD analysis showed that Pt face-cubic centered (FCC) and Ru hexagonal close-packed (HCP) phases coexist in the obtained materials. The average crystallite sizes of the Pt (FCC) phase were in the range of 8-12 nm. The material prepared with Pt:Ru atomic ratio of 50:50 showed the best performance for methanol electro-oxidation. (author)

Continuous Catalytic Hydrodeoxygenation of Guaiacol over Pt/SiO2 and Pt/H-MFI-90

Directory of Open Access Journals (Sweden)

Melanie Hellinger

2015-07-01

Full Text Available Hydrodeoxygenation of guaiacol in the presence of 1-octanol was studied in a fixed-bed reactor under mild conditions (50–250 °C over platinum particles supported on silica (Pt/SiO2 and a zeolite with framework type MFI at a Si/Al-ratio of 45 (Pt/H-MFI-90. The deoxygenation selectivity strongly depended on the support and the temperature. Both guaiacol and octanol were rapidly deoxygenated in the presence of hydrogen over Pt/H-MFI-90 at 250 °C to cyclohexane and octane, respectively. In contrast, Pt/SiO2 mostly showed hydrogenation, but hardly any deoxygenation activity. The acidic sites of the MFI-90 support lead to improved deoxygenation performance at the mild temperature conditions of this study. Significant conversions under reaction conditions applied already occurred at temperatures of 200 °C. However, during long-term stability tests, the Pt/H-MFI-90 catalyst deactivated after more than 30 h, probably due to carbon deposition, whereas Pt/SiO2 was more stable. The catalytic activity of the zeolite catalyst could only partly be regained by calcination in air, as some of the acidic sites were lost.

Pt, Re and Pt-Re incorporation in sulfated zirconia as catalysts for n-pentane isomerization

International Nuclear Information System (INIS)

Aboul-Gheit, A.K.; El-Desouki, D.S.; Abdel-Hamid, S.M.; Ghoneim, S.A.; Ibrahim, A.H.; Gad, F.K.; Abdel-Aleem, G.M.

2010-01-01

Two groups of modified Sulfated Zirconia (S Z) catalysts were prepared by the sol-gel method. The first group was modified by four different concentrations of Pt metal (0.15, 0.30, 0.45 and 0.60 wt %), whereas the second group contained Pt-Re combinations on SZ. All the prepared catalysts were characterized by XRD, TPR, TEM, TGA, IR spectroscopy as well as surface properties using the BET method. The catalytic activity of the catalysts was examined for the hydro isomerization of n-pentane to iso-pentane. The catalytic activity was found to increase with increasing Pt concentration in the mono metallic catalysts. The combination of Re ion with Pt on SZ results in significant changes in the characters and activities of the catalysts. The 0.45 wt % Pt + 0.15 wt % Re/SZ catalyst exhibited the highest selective compared to other metal ratios investigated

Contribution to the study of Pt197 and Au197 excited states

International Nuclear Information System (INIS)

Alves, S.M.C.

1971-01-01

The gamma transitions of the Ir 197β- → Pt 197β- → Au 197 decay chain were investigated using three Ge(Li) detectors of high resolution and spectroscopy techniques with one, two and three via of analysis. For the Ir 197β- →Pt 197 decay, four new gamma transitions with energy of 877.6; 938.7; 1049.6 and 1341.8 Kev were observed, presupposing to be energy levels in 877.6; 938.7; 1049.6 and 1347.8 Kev in the Ir 197 population by β- decay of Ir 197 . By the first time, the 299.5 Kev transition was observed, in the Pt 197 m (80min) decay, interpreted as a direct desexcitation of the 299.5Kev level in Pt 197 . A new scheme of Ir 197 β- → Au 197 decay based on the obtained results, is proposed. (M.C.K.) [pt

In vitro blood compatibility of poly (hydroxybutyrate-co-hydroxyhexanoate) and the influence of surface modification by alkali treatment

International Nuclear Information System (INIS)

Shen Feng; Zhang Erlin; Wei Zunjie

2010-01-01

In vitro blood compatibility of poly (hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx) was evaluated in comparison with poly (L-lactic acid) (PLLA) by a haemolysis assay, in vitro platelet adhesion test and coagulation measurements including plasma recalcification time (PRT), plasma prothrombin time (PT) and kinetic clotting time. The results showed that PHBHHx exhibited better blood compatibility than PLLA. Furthermore, PHBHHx film was modified by NaOH treatment to improve the surface hydrophilic property and the influence of the surface modification on the blood compatibility was investigated. Surface properties including hydrophilic property, surface appearance and functional groups were characterized by water contact angle measurement, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results showed that the hydrophilic property of PHBHHx film was obviously improved by the NaOH treatment. It was also shown that the NaOH treatment could significantly enhance the blood compatibility of PHBHHx by prolonging PRT, PT, and kinetic clotting time and decreasing platelet activation. It is thought that the improvement in the hydrophilic property mainly contributes to the enhancement of blood compatibility.

Significance of lymphadenectomy with splenectomy in radical surgery for advanced (pT3/pT4) remnant gastric cancer.

Science.gov (United States)

Sugita, Hiroki; Oda, Eri; Hirota, Masahiko; Ishikawa, Shinji; Tomiyasu, Shinjiro; Tanaka, Hiroshi; Arita, Tetsumasa; Yagi, Yasushi; Baba, Hideo

2016-04-01

To date, the optimal surgical strategy for remnant gastric cancer has not been determined. The purpose of this study was to clarify the significance of lymphadenectomy with splenectomy in remnant gastric cancer surgery. This retrospective cohort study was conducted at the Kumamoto Regional Medical Center. The primary endpoint was overall survival after surgery. We retrospectively analyzed the clinicopathologic features, surgical treatments, and long-term prognosis of remnant gastric cancer patients treated with total gastrectomy. A total of 80 patients with gastric cancer in the remnant stomach after distal gastrectomy and who underwent total gastrectomy were enrolled in the study. Splenectomy was performed in 38 patients. Lymph node metastasis in the splenic hilum was not observed in the patients with pT1/pT2 tumors, whereas nodal metastasis at the splenic hilum was detected in 30.4% of the patients with pT3/pT4 tumors. The survival rate of the patients with pT3/pT4 tumors who underwent splenectomy was significantly higher than that of the patients who did not undergo splenectomy, although there was no difference in the patients with pT1/pT2 tumors. Among the patients classified as R0, the survival rate of the patients with pT3/pT4 tumors who underwent splenectomy was significantly higher than that of the patients who did not undergo splenectomy. Lymphadenectomy with splenectomy in radical surgery is beneficial for patients with advanced (pT3/pT4) remnant gastric cancer. Copyright © 2016 Elsevier Inc. All rights reserved.

Combinatorial investigation of Pt-Ru-Sn alloys as an anode electrocatalysts for direct alcohol fuel cells

Energy Technology Data Exchange (ETDEWEB)

Chu, Young Hwan [Department of New Energy.Resource Engineering, College of Science and Engineering, Sangji University, 124, Sangjidae-gil, Wonju-si, Gangwon-Do 220-702 (Korea); Shul, Yong Gun [Department of Chemical and Biomolecular Engineering, Yonsei University, 134, Shinchon-Dong, Seodaemun-Gu, Seoul 120-749 (Korea)

2010-10-15

Low-temperature direct alcohol fuel cells fed with different kinds of alcohol (methanol, ethanol and 2-propanol) have been investigated by employing ternary electrocatalysts (Pt-Ru-Sn) as anode catalysts. Combinatorial chemistry has been applied to screen the 66-PtRuSn-anode arrays at the same time to reduce cost, time, and effort when we select the optimum composition of electrocatalysts for DAFCs (Direct Alcohol Fuel Cells). PtRuSn (80:20:0) showed the lowest onset potential for methanol electro-oxidation, PtRuSn (50:0:50) for ethanol, and PtRuSn (20:70:10) for 2-propanol in CV results respectively, and single cell performance test indicated that Ru is more suitable for direct methanol fuel cell system, Sn for direct ethanol fuel cell system, and 2-propanol could be applied as fuel with low platinum composition anode electrocatalyst. The single cell performance results and electrochemical results (CV) were well matched with the combinatorial electrochemical results. As a result, we could verify the availability of combinatorial chemistry by comparing the results of each extreme electrocatalysts compositions as follows: PtRuSn (80:20:0) for methanol, PtRuSn (50:0:50) for ethanol and PtRuSn (20:70:10) for 2-propanol. (author)

Simple serum markers for significant liver inflammation in chronic hepatitis B patients with an alanine aminotransferase level lower than 2 times upper limit of normal

Directory of Open Access Journals (Sweden)

LI Qiang

2016-06-01

Full Text Available ObjectiveTo investigate the simple serum markers for significant liver inflammation in chronic hepatitis B (CHB patients with an alanine aminotransferase (ALT level of ＜2 times upper limit of normal (ULN. MethodsThe clinical data of 278 CHB patients with ALT ＜2×ULN (ULN=40 U/L were analyzed retrospectively. Significant liver inflammation was defined as a liver inflammatory activity grade (G ≥2. The t-test was used for comparison of normally distributed continuous data between groups, and the Kruskal-Wallis rank sum test was used for non-normally distributed continuous data; the chi-square test was used for comparison of categorical data between groups. Multivariate logistic regression analysis was used to identify independent predictors for significant liver inflammation in CHB patients with ALT ＜2×ULN. The receiver operating characteristic (ROC curve was used to evaluate the diagnostic value of serum markers in significant liver inflammation. ResultsOf the 278 CHB patients enrolled, 175 (62.9% had no significant liver inflammation (G0-1 group and 103 (37.1% had significant liver inflammation (G2-4 group. There were significant differences in ALT, aspartate aminotransferase, alkaline phosphatase, gamma-glutamyl transpeptidase (GGT, albumin, globulin, prothrombin time (PT, platelet, absolute neutrophil count, hyaluronic acid (HA, glycocholic acid, precollagen Ⅲ, and collagen type Ⅳ(ⅣC between the two groups (all P＜0.05. The multivariate regression analysis showed that GGT, PT, ⅣC, and HA were independent predictors for significant liver inflammation in CHB patients with ALT＜2×ULN (OR=1.015, 1.600, 1.151, and 1.014, P=0.008, 0.021, 0.003, and 0.018. The areas under the ROC curve for GGT, PT, IVC, and HA to diagnose significant liver inflammation were 0.804, 0.722, 0.707, and 0.632, respectively. The cut-off value of 48.5 U/L for GGT to predict significant liver inflammation had a specificity of 90.3% and a negative

Ethanol electrooxidation on novel carbon supported Pt/SnO{sub x}/C catalysts with varied Pt:Sn ratio

Energy Technology Data Exchange (ETDEWEB)

Jiang, L. [Institute of Surface Chemistry and Catalysis, Ulm University, D-89069 Ulm (Germany); Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 116023 Dalian (China); Colmenares, L.; Jusys, Z. [Institute of Surface Chemistry and Catalysis, Ulm University, D-89069 Ulm (Germany); Sun, G.Q. [Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 116023 Dalian (China)], E-mail: gqsun@dicp.ac.cn; Behm, R.J. [Institute of Surface Chemistry and Catalysis, Ulm University, D-89069 Ulm (Germany)], E-mail: juergen.behm@uni-ulm.de

2007-12-01

Novel carbon supported Pt/SnO{sub x}/C catalysts with Pt:Sn atomic ratios of 5:5, 6:4, 7:3 and 8:2 were prepared by a modified polyol method and characterized with respect to their structural properties (X-ray diffraction (XRD) and transmission electron microscopy (TEM)), chemical composition (XPS), their electrochemical properties (base voltammetry, CO{sub ad} stripping) and their electrocatalytic activity and selectivity for ethanol oxidation (ethanol oxidation reaction (EOR)). The data show that the Pt/SnO{sub x}/C catalysts are composed of Pt and tin oxide nanoparticles with an average Pt particle diameter of about 2 nm. The steady-state activity of the Pt/SnO{sub x}/C catalysts towards the EOR decreases with tin content at room temperature, but increases at 80 deg. C. On all Pt/SnO{sub x}/C catalysts, acetic acid and acetaldehyde represent dominant products, CO{sub 2} formation contributes 1-3% for both potentiostatic and potentiodynamic reaction conditions. With increasing potential, the acetaldehyde yield decreases and the acetic acid yield increases. The apparent activation energies of the EOR increase with tin content (19-29 kJ mol{sup -1}), but are lower than on Pt/C (32 kJ mol{sup -1}). The somewhat better performance of the Pt/SnO{sub x}/C catalysts compared to alloyed PtSn{sub x}/C catalysts is attributed to the presence of both sufficiently large Pt ensembles for ethanol dehydrogenation and C-C bond splitting and of tin oxide for OH generation. Fuel cell measurements performed for comparison largely confirm the results obtained in model studies.

Effect of Pt:Sn atomic ratio on the preparation of PtSn/C electrocatalysts using electron beam irradiation

Energy Technology Data Exchange (ETDEWEB)

Silva, Dionisio F.; Oliveira Neto, Almir; Pino, Eddy S.; Linardi, Marcelo; Spinace, Estevam V., E-mail: dfsilva@ipen.b, E-mail: espinace@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2009-07-01

PtSn/C electrocatalysts were prepared with Pt:Sn atomic ratios of 3:1, 1:1 and 1:3 in water/2-propanol using electron beam irradiation. The obtained materials were characterized by EDX, XRD and cyclic voltammetry. The ethanol electro-oxidation was studied by chronoamperometry. The XRD diffractograms of the PtSn/C electrocatalysts showed typical face-centered cubic (fcc) structure of platinum and the presence of a SnO{sub 2} phase (cassiterite). The mean crystallite sizes of Pt fcc phase was in the range of 3.0-3.5 nm. The PtSn/C electrocatalysts were active for ethanol electro-oxidation at room temperature and the material prepared with Pt:Sn atomic ratio of 1:1 showed the best activity. (author)

Effect of Pt:Sn atomic ratio on the preparation of PtSn/C electrocatalysts using electron beam irradiation

International Nuclear Information System (INIS)

Silva, Dionisio F.; Oliveira Neto, Almir; Pino, Eddy S.; Linardi, Marcelo; Spinace, Estevam V.

2009-01-01

PtSn/C electrocatalysts were prepared with Pt:Sn atomic ratios of 3:1, 1:1 and 1:3 in water/2-propanol using electron beam irradiation. The obtained materials were characterized by EDX, XRD and cyclic voltammetry. The ethanol electro-oxidation was studied by chronoamperometry. The XRD diffractograms of the PtSn/C electrocatalysts showed typical face-centered cubic (fcc) structure of platinum and the presence of a SnO 2 phase (cassiterite). The mean crystallite sizes of Pt fcc phase was in the range of 3.0-3.5 nm. The PtSn/C electrocatalysts were active for ethanol electro-oxidation at room temperature and the material prepared with Pt:Sn atomic ratio of 1:1 showed the best activity. (author)

The Pt site reactivity of the molecular graphs of Au6Pt isomers

Science.gov (United States)

Xu, Tianlv; Jenkins, Samantha; Xiao, Chen-Xia; Maza, Julio R.; Kirk, Steven R.

2013-12-01

Within the framework of the theory of atoms in molecules (QTAIM), in an exploratory study we propose a new measure of site reactivity equivalent to the atomic coordination number based purely on the electronic structure. It was found that the number of ring critical points (NNRCPs) positioned on the boundary of the atomic basin of the dopant (Pt) nucleus correlated very well with the relative zero point energy (ZPE) corrected energies. A weaker condition (i.e. than the number of associated bond paths) for the association of the dopant Pt nucleus with the Au6Pt molecular graph is found for NNRCP = 0.

TaPT: Temperature-Aware Dynamic Cache Optimization for Embedded Systems

Directory of Open Access Journals (Sweden)

Tosiron Adegbija

2017-12-01

Full Text Available Embedded systems have stringent design constraints, which has necessitated much prior research focus on optimizing energy consumption and/or performance. Since embedded systems typically have fewer cooling options, rising temperature, and thus temperature optimization, is an emergent concern. Most embedded systems only dissipate heat by passive convection, due to the absence of dedicated thermal management hardware mechanisms. The embedded system’s temperature not only affects the system’s reliability, but can also affect the performance, power, and cost. Thus, embedded systems require efficient thermal management techniques. However, thermal management can conflict with other optimization objectives, such as execution time and energy consumption. In this paper, we focus on managing the temperature using a synergy of cache optimization and dynamic frequency scaling, while also optimizing the execution time and energy consumption. This paper provides new insights on the impact of cache parameters on efficient temperature-aware cache tuning heuristics. In addition, we present temperature-aware phase-based tuning, TaPT, which determines Pareto optimal clock frequency and cache configurations for fine-grained execution time, energy, and temperature tradeoffs. TaPT enables autonomous system optimization and also allows designers to specify temperature constraints and optimization priorities. Experiments show that TaPT can effectively reduce execution time, energy, and temperature, while imposing minimal hardware overhead.

Pt-graphene electrodes for dye-sensitized solar cells

International Nuclear Information System (INIS)

Hoshi, Hajime; Tanaka, Shumpei; Miyoshi, Takashi

2014-01-01

Highlights: • Graphene films with Pt nanoparticles were prepared from commercial graphene. • Pt consumption can be reduced by using Pt-graphene films. • The film showed improved catalytic activity for the reaction I 3 − /I − . • The film can be used as the counter electrode of dye-sensitized solar cells (DSSCs). • The performance of DSSC was superior to that of the Pt electrode. - Abstract: A simple paste method for fabricating graphene films with Pt nanoparticles was developed. First, graphene pastes with Pt nanoparticles were prepared from commercially available graphene. The resulting films of graphene nanoplatelet aggregates with Pt nanoparticles (Pt-GNA) contained Pt nanoparticles distributed over the entire three-dimensional surface of the GNA. Then, the catalytic activity for the I 3 − /I − redox reaction was evaluated by cyclic voltammetry. The GNA electrode exhibited higher activity than a graphene nanoplatelet electrode because of its higher effective surface area. Addition of Pt nanoparticles to the electrodes improved the catalytic activity. In particular, a large Faradaic current for the I 3 − /I − reaction was observed for the Pt-GNA electrode. As the counter electrodes of dye-sensitized solar cells (DSSCs), their performance was consistent with the cyclic voltammetry results. In particular, the DSSC performance of the Pt-GNA electrode was superior to that of the Pt electrodes commonly used in DSSCs

Catalyst Architecture for Stable Single Atom Dispersion Enables Site-Specific Spectroscopic and Reactivity Measurements of CO Adsorbed to Pt Atoms, Oxidized Pt Clusters, and Metallic Pt Clusters on TiO2.

Science.gov (United States)

DeRita, Leo; Dai, Sheng; Lopez-Zepeda, Kimberly; Pham, Nicholas; Graham, George W; Pan, Xiaoqing; Christopher, Phillip

2017-10-11

Oxide-supported precious metal nanoparticles are widely used industrial catalysts. Due to expense and rarity, developing synthetic protocols that reduce precious metal nanoparticle size and stabilize dispersed species is essential. Supported atomically dispersed, single precious metal atoms represent the most efficient metal utilization geometry, although debate regarding the catalytic activity of supported single precious atom species has arisen from difficulty in synthesizing homogeneous and stable single atom dispersions, and a lack of site-specific characterization approaches. We propose a catalyst architecture and characterization approach to overcome these limitations, by depositing ∼1 precious metal atom per support particle and characterizing structures by correlating scanning transmission electron microscopy imaging and CO probe molecule infrared spectroscopy. This is demonstrated for Pt supported on anatase TiO 2 . In these structures, isolated Pt atoms, Pt iso , remain stable through various conditions, and spectroscopic evidence suggests Pt iso species exist in homogeneous local environments. Comparing Pt iso to ∼1 nm preoxidized (Pt ox ) and prereduced (Pt metal ) Pt clusters on TiO 2 , we identify unique spectroscopic signatures of CO bound to each site and find CO adsorption energy is ordered: Pt iso ≪ Pt metal atoms bonded to TiO 2 and that Pt iso exhibits optimal reactivity because every atom is exposed for catalysis and forms an interfacial site with TiO 2 . This approach should be generally useful for studying the behavior of supported precious metal atoms.

Ethylene glycol oxidation on Pt and Pt-Ru nanoparticle decorated polythiophene/multiwalled carbon nanotube composites for fuel cell applications

International Nuclear Information System (INIS)

Selvaraj, Vaithilingam; Alagar, Muthukaruppan

2008-01-01

A novel supporting material containing polythiophene (PTh) and multiwalled carbon nanotubes (MWCNTs) (PTh-CNTs) is prepared by in situ polymerization of thiophene on carbon nanotubes using FeCl 3 as oxidizing agent under sonication. The prepared polythiophene/CNT composites are further decorated with Pt and Pt-Ru nanoparticles by chemical reduction of the corresponding metal salts using HCHO as reducing agent at pH = 11 (Pt/PTh-CNT and Pt-Ru/PTh-CNT). The fabricated composite films decorated with nanoparticles were investigated towards the electrochemical oxidation of ethylene glycol (EG). The presence of carbon nanotubes in conjugation with a conducting polymer produces a good catalytic effect, which might be due to the higher electrochemically accessible surface areas, electronic conductivity and easier charge-transfer at polymer/electrolyte interfaces, which allows higher dispersion of Pt and Pt-Ru nanoparticles. Such nanoparticle modified PTh-CNT electrodes exhibit better catalytic behavior towards ethylene glycol oxidation. Results show that Pt/PTh-CNT and Pt-Ru/PTh-CNT modified electrodes show enhanced electrocatalytic activity and stability towards the electro-oxidation of ethylene glycol than the Pt/PTh electrodes, which shows that the composite film is more promising for applications in fuel cells

A review of the clinical utility of INR to monitor and guide administration of prothrombin complex concentrate to orally anticoagulated patients

DEFF Research Database (Denmark)

Sølbeck, Sacha; Ostrowski, Sisse R; Johansson, Pär I

2012-01-01

the initiation steps of the haemostatic process. The objective of the present review was to reassess the evidence for using INR as a tool to guide administration of prothrombin complex concentrates (PCC) to OAC patients. A Medline and Cochrane database search was conducted using the following keywords...... value to aim for when reversing OAC was found. In three of the studies it was reported that patients reaching their target INR continued to bleed, whereas three studies reviewed reported good haemostatic response also in patients that did not reach their target INR. The present review found limited...

Methanol oxidation reaction activity of microwave irradiated and heat-treated Pt/Co and Pt/Ni nano-electrocatalysts

CSIR Research Space (South Africa)

Mathe, NR

2014-11-01

Full Text Available Bimetallic Pt nanoparticles were prepared by alloying Pt with the non-noble transition metals, Co and Ni, using a conventional heat-treatment (HT) method and microwaveirradiation (MW). The resulting samples were PteCo-Ht, PteNi-HT, PteCo, MW and Pt...

Density functional theory studies of the adsorption of ethylene and oxygen on Pt(111) and Pt3Sn(111)

DEFF Research Database (Denmark)

Watwe, R.M.; Cortright, R.D.; Mavrikakis, Manos

2001-01-01

Density functional theory, employing periodic slab calculations, was used to investigate the interactions of ethylene and oxygen with Pt(111) and Pt3Sn(111). The predicted energetics and structures of adsorbed species on Pt(111) are in good agreement with experimental data. The binding energies...... more than adsorption on two-fold and one-fold sites. Oxygen atoms bond as strongly on Pt3Sn(111) as on Pt(111), and these atoms prefer to adsorb near Sn atoms on the surface. The addition of Sn to Pt(111) leads to a surface heterogeneity, wherein ethylidyne species prefer to adsorb away from Sn atoms...

Fabrication of a nanosize-Pt-embedded membrane electrode assembly to enhance the utilization of Pt in proton exchange membrane fuel cells.

Science.gov (United States)

Choe, Junseok; Kim, Doyoung; Shim, Jinyong; Lee, Inhae; Tak, Yongsug

2011-08-01

A procedure to locate the Pt nanostructure inside the hydrophilic channel of a Nafion membrane was developed in order to enhance Pt utilization in PEMFCs. Nanosize Pt-embedded MEA was constructed by Cu electroless plating and subsequent Pt electrodeposition inside the hydrophilic channels of the Nafion membrane. The metallic Pt nanostructure fabricated inside the membrane was employed as an oxygen reduction catalyst for a PEMFC and facilitated effective use of the hydrophilic channels inside the membrane. Compared to the conventional MEA, a Pt-embedded MEA with only 68% Pt loading showed better PEMFC performance.

Correlating Structure and Oxygen Reduction Activity on Y/Pt(111) and Gd/Pt(111) Single Crystals

DEFF Research Database (Denmark)

Ulrikkeholm, Elisabeth Therese; Pedersen, Anders Filsøe; Johansson, Tobias Peter

2015-01-01

Polymer Electrolyte Membrane Fuel Cells (PEMFC) hold promise as a zero-emission source of power, particularly suitable for automotive vehicles. However, the high loading of Pt required to catalyse the Oxygen Reduction Reaction (ORR) at the PEMFC cathode prevents the commercialisation of this tech......Polymer Electrolyte Membrane Fuel Cells (PEMFC) hold promise as a zero-emission source of power, particularly suitable for automotive vehicles. However, the high loading of Pt required to catalyse the Oxygen Reduction Reaction (ORR) at the PEMFC cathode prevents the commercialisation...... of this technology. Improving the activity of Pt by alloying it with other metals could decrease the loading of Pt at the cathode to a level comparable to Pt-group metal loading in internal combustion engines. PtxY and PtxGd exhibit exceptionally high activity for oxygen reduction, both in the polycrystalline form...

The decay of 399 KeV isomeric state in 197Pt

International Nuclear Information System (INIS)

Soares, J.C.; Melo, A.A.; Gil, F.B.; Dias, H.

1981-02-01

The nuclear levels in 197 Pt have been studied from decay of 95.4 min 197 (sup m)Pt. The isomeric state was produced by (n,#betta#) reaction on the enriched 196 Pt. The #betta#-ray spectra have been observed with a hyperpure Ge detector and a large volume Ge(Li) detector. The half lives of the 399 KeV and the 53 KeV states were determined with improved precision. The results are: T1/2 (399 KeV) = 95.41 +- 0.18 min and T1/2(53 KeV) = 16.58 +- 0.17 ns. The g-factor of the 53 Kev 5/2 - state has been measured by the gamma-gamma time differential perturbed angular correlation (TDPAC) method in an external magnetic field of 25,1 kG using the 346 - 53 KeV gamma cascade. The value of g-factor was obtained to be + 0.335 +- 0.010. This result is compared with the known g-factors of the similar states in 195 Pt, and in 197 Hg and 199 Hg and also with the theoretical calculations based on the quasiparticle-phonon coupling scheme. Possibility of using the 346 - 53 KeV gamma cascade in 197 Pt in the future TDPAC studies is discussed. (Author) [pt

Pt-graphene electrodes for dye-sensitized solar cells

Energy Technology Data Exchange (ETDEWEB)

Hoshi, Hajime, E-mail: hoshi@ed.tus.ac.jp; Tanaka, Shumpei; Miyoshi, Takashi

2014-12-15

Highlights: • Graphene films with Pt nanoparticles were prepared from commercial graphene. • Pt consumption can be reduced by using Pt-graphene films. • The film showed improved catalytic activity for the reaction I{sub 3}{sup −}/I{sup −}. • The film can be used as the counter electrode of dye-sensitized solar cells (DSSCs). • The performance of DSSC was superior to that of the Pt electrode. - Abstract: A simple paste method for fabricating graphene films with Pt nanoparticles was developed. First, graphene pastes with Pt nanoparticles were prepared from commercially available graphene. The resulting films of graphene nanoplatelet aggregates with Pt nanoparticles (Pt-GNA) contained Pt nanoparticles distributed over the entire three-dimensional surface of the GNA. Then, the catalytic activity for the I{sub 3}{sup −}/I{sup −} redox reaction was evaluated by cyclic voltammetry. The GNA electrode exhibited higher activity than a graphene nanoplatelet electrode because of its higher effective surface area. Addition of Pt nanoparticles to the electrodes improved the catalytic activity. In particular, a large Faradaic current for the I{sub 3}{sup −}/I{sup −} reaction was observed for the Pt-GNA electrode. As the counter electrodes of dye-sensitized solar cells (DSSCs), their performance was consistent with the cyclic voltammetry results. In particular, the DSSC performance of the Pt-GNA electrode was superior to that of the Pt electrodes commonly used in DSSCs.

Preparation of Pt Au/C and Pt Au Bi/C electrocatalysts using electron beam irradiation for ethanol electro-oxidation in alkaline medium

International Nuclear Information System (INIS)

Silva, Dionisio F.; Geraldes, Adriana N.; Cardoso, Elisangela S.Z.; Gomes, Thiago B.; Linardi, Marcelo; Oliveira Neto, Almir; Spinace, Estevam V.

2011-01-01

Pt Au/C (50:50) and PtAuBi/C electrocatalysts with Pt:Au:Bi atomic ratios of 50:40:10, 50:30:20 and 50:10:40 were prepared in water/2-propanol using electron beam irradiation. The materials were characterized by X-ray diffraction (XRD) and the electro-oxidation of ethanol was studied by chronoamperometry at room temperature. The X-ray diffraction measurements for all electrocatalysts prepared showed four peaks, which are associated with the planes of the face-centered cubic (fcc) structure characteristic of Pt and Pt alloys. For PtAuBi/C it was also observed the presence of a mixture of BiPt alloys and bismuth phases. The average crystallite sizes for Pt/C, PtAu/C, PtAuBi/C (50:40:10), PtAuBi/C (50:30:20) and PtAuBi/C (50:10:40) were in the range of 2.0 - 4.0 nm. The activity of the electrocatalysts for ethanol oxidation in alkaline medium showed that PtAuBi/C (50:40:10) had a higher performance for ethanol oxidation compared to others electrocatalysts prepared. (author)

Preparation of Pt Au/C and Pt Au Bi/C electrocatalysts using electron beam irradiation for ethanol electro-oxidation in alkaline medium

Energy Technology Data Exchange (ETDEWEB)

Silva, Dionisio F.; Geraldes, Adriana N.; Cardoso, Elisangela S.Z.; Gomes, Thiago B.; Linardi, Marcelo; Oliveira Neto, Almir; Spinace, Estevam V., E-mail: dfsilva@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

Pt Au/C (50:50) and PtAuBi/C electrocatalysts with Pt:Au:Bi atomic ratios of 50:40:10, 50:30:20 and 50:10:40 were prepared in water/2-propanol using electron beam irradiation. The materials were characterized by X-ray diffraction (XRD) and the electro-oxidation of ethanol was studied by chronoamperometry at room temperature. The X-ray diffraction measurements for all electrocatalysts prepared showed four peaks, which are associated with the planes of the face-centered cubic (fcc) structure characteristic of Pt and Pt alloys. For PtAuBi/C it was also observed the presence of a mixture of BiPt alloys and bismuth phases. The average crystallite sizes for Pt/C, PtAu/C, PtAuBi/C (50:40:10), PtAuBi/C (50:30:20) and PtAuBi/C (50:10:40) were in the range of 2.0 - 4.0 nm. The activity of the electrocatalysts for ethanol oxidation in alkaline medium showed that PtAuBi/C (50:40:10) had a higher performance for ethanol oxidation compared to others electrocatalysts prepared. (author)

Results of the Proficiency Test, PT1 and PT2, 2011

DEFF Research Database (Denmark)

Kahns, Søren; Nicolajsen, Nicole; Christophersen, Maj-Britt

2012-01-01

A comparative test of diagnostic procedures was provided by the EU Reference Laboratory (EURL) for Fish Diseases to 41 National Reference Laboratories (NRLs) in the start of middle of October 2011. The test was prepared and tested according to protocols accredited by DANAK under registration numb...... 515 to proficiency testing according to the quality assurance standard DS/EN ISO/IEC 17043. The test consisted of 2 tests: PT1 and PT2....

Synthesis and Characterization of Pt-Ag Alloy Nanocages with Enhanced Activity and Durability toward Oxygen Reduction.

Science.gov (United States)

Yang, Xuan; Roling, Luke T; Vara, Madeline; Elnabawy, Ahmed O; Zhao, Ming; Hood, Zachary D; Bao, Shixiong; Mavrikakis, Manos; Xia, Younan

2016-10-12

Engineering the elemental composition of metal nanocrystals offers an effective strategy for the development of catalysts or electrocatalysts with greatly enhanced activity. Herein, we report the synthesis of Pt-Ag alloy nanocages with an outer edge length of 18 nm and a wall thickness of about 3 nm. Such nanocages with a composition of Pt 19 Ag 81 could be readily prepared in one step through the galvanic replacement reaction between Ag nanocubes and a Pt(II) precursor. After 10 000 cycles of potential cycling in the range of 0.60-1.0 V as in an accelerated durability test, the composition of the nanocages changed to Pt 56 Ag 44 , together with a specific activity of 1.23 mA cm -2 toward oxygen reduction, which was 3.3 times that of a state-of-the-art commercial Pt/C catalyst (0.37 mA cm -2 ) prior to durability testing. Density functional theory calculations attributed the increased activity to the stabilization of the transition state for breaking the O-O bond in molecular oxygen. Even after 30 000 cycles of potential cycling, the mass activity of the nanocages only dropped from 0.64 to 0.33 A mg -1 Pt , which was still about two times that of the pristine Pt/C catalyst (0.19 A mg -1 Pt ).

Influence of Pt thickness on magnetization reversal processes in (Pt/Co)3 multilayers with perpendicular anisotropy

International Nuclear Information System (INIS)

Belhi, R.; Adanlété Adjanoh, A.; Vogel, J.

2012-01-01

We present a detailed study of the magnetization reversal in perpendicularly magnetized (Pt/Co) 3 multilayers with different values of the platinum interlayer thickness t Pt . To study the magnetization reversal in our samples we combined measurements of relaxation curves with the direct visualization of domain structures. Magnetization reversal was dominated by domain wall propagation for t Pt =1 nm and by domain nucleation for t Pt =0.2 nm, while a mixed process was observed for t Pt =0.8 nm. We interpret our results within the framework of a model of thermally activated reversal where a distribution of activation energy barriers is taken into account. The reversal process was correlated with the energy barrier distribution. - Highlights: ► We show that the coercivity decreases with the Pt interlayer thickness. ► The reversal process is sensitively dependent on platinum interlayer thickness. ► We interpreted the results by taking into account of an energy barrier distribution. ► The reversal process was correlated with the energy barrier distribution width. ► The energy barrier distribution width varies linearly with the applied field.

Direct methanol fuel cell with extended reaction zone anode: PtRu and PtRuMo supported on graphite felt

Energy Technology Data Exchange (ETDEWEB)

Bauer, Alex; Gyenge, Elod L.; Oloman, Colin W. [Department of Chemical and Biological Engineering, The University of British Columbia, 2360 East Mall, Vancouver, BC (Canada)

2007-05-15

Pressed graphite felt (thickness {proportional_to}350 {mu}m) with electrodeposited PtRu (43 g m{sup -2}, 1.4:1 atomic ratio) or PtRuMo (52 g m{sup -2}, 1:1:0.3 atomic ratio) nanoparticle catalysts was investigated as an anode for direct methanol fuel cells. At temperatures above 333 K the fuel cell performance of the PtRuMo catalyst was superior compared to PtRu. The power density was 2200 W m{sup -2} with PtRuMo at 5500 A m{sup -2} and 353 K while under the same conditions PtRu yielded 1925 W m{sup -2}. However, the degradation rate of the Mo containing catalyst formulation was higher. Compared to conventional gas diffusion electrodes with comparable PtRu catalyst composition and load, the graphite felt anodes gave higher power densities mainly due to the extended reaction zone for methanol oxidation. (author)

Direct methanol fuel cell with extended reaction zone anode: PtRu and PtRuMo supported on graphite felt

Science.gov (United States)

Bauer, Alex; Gyenge, Előd L.; Oloman, Colin W.

Pressed graphite felt (thickness ∼350 μm) with electrodeposited PtRu (43 g m -2, 1.4:1 atomic ratio) or PtRuMo (52 g m -2, 1:1:0.3 atomic ratio) nanoparticle catalysts was investigated as an anode for direct methanol fuel cells. At temperatures above 333 K the fuel cell performance of the PtRuMo catalyst was superior compared to PtRu. The power density was 2200 W m -2 with PtRuMo at 5500 A m -2 and 353 K while under the same conditions PtRu yielded 1925 W m -2. However, the degradation rate of the Mo containing catalyst formulation was higher. Compared to conventional gas diffusion electrodes with comparable PtRu catalyst composition and load, the graphite felt anodes gave higher power densities mainly due to the extended reaction zone for methanol oxidation.

Multi-color imaging of magnetic Co/Pt heterostructures

Directory of Open Access Journals (Sweden)

Felix Willems

2017-01-01

Full Text Available We present an element specific and spatially resolved view of magnetic domains in Co/Pt heterostructures in the extreme ultraviolet spectral range. Resonant small-angle scattering and coherent imaging with Fourier-transform holography reveal nanoscale magnetic domain networks via magnetic dichroism of Co at the M2,3 edges as well as via strong dichroic signals at the O2,3 and N6,7 edges of Pt. We demonstrate for the first time simultaneous, two-color coherent imaging at a free-electron laser facility paving the way for a direct real space access to ultrafast magnetization dynamics in complex multicomponent material systems.

Characterization of Pt catalysts supported in mixed oxides; Caracterizacion de catalizadores de Pt soportado en oxidos mixtos

Energy Technology Data Exchange (ETDEWEB)

Perez H, R.; Garcia C, M.A.; Gomez C, A.; Diaz, G. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2000-07-01

The catalytic supports TiO{sub 2}, ZrO{sub 2} and TiO{sub 2}-ZrO{sub 2} were prepared by the sol-gel technique. The incorporation of Pt to the supports was by the classical impregnation method. The catalytic materials were characterized (Pt/TiO{sub 2}, Pt/ZrO{sub 2} and Pt/TiO{sub 2}-ZrO{sub 2}) by diverse techniques to determine: the texture (BET), evolution of the catalytic materials synthesised after drying and calcination (Infrared spectroscopy) and by Thermogravimetric analysis. (Author)

Particle in a box in PT-symmetric quantum mechanics and an electromagnetic analog

Science.gov (United States)

Dasarathy, Anirudh; Isaacson, Joshua P.; Jones-Smith, Katherine; Tabachnik, Jason; Mathur, Harsh

2013-06-01

In PT-symmetric quantum mechanics a fundamental principle of quantum mechanics, that the Hamiltonian must be Hermitian, is replaced by another set of requirements, including notably symmetry under PT, where P denotes parity and T denotes time reversal. Here we study the role of boundary conditions in PT-symmetric quantum mechanics by constructing a simple model that is the PT-symmetric analog of a particle in a box. The model has the usual particle-in-a-box Hamiltonian but boundary conditions that respect PT symmetry rather than Hermiticity. We find that for a broad class of PT-symmetric boundary conditions the model respects the condition of unbroken PT symmetry, namely, that the Hamiltonian and the symmetry operator PT have simultaneous eigenfunctions, implying that the energy eigenvalues are real. We also find that the Hamiltonian is self-adjoint under the PT-symmetric inner product. Thus we obtain a simple soluble model that fulfills all the requirements of PT-symmetric quantum mechanics. In the second part of this paper we formulate a variational principle for PT-symmetric quantum mechanics that is the analog of the textbook Rayleigh-Ritz principle. Finally we consider electromagnetic analogs of the PT-symmetric particle in a box. We show that the isolated particle in a box may be realized as a Fabry-Perot cavity between an absorbing medium and its conjugate gain medium. Coupling the cavity to an external continuum of incoming and outgoing states turns the energy levels of the box into sharp resonances. Remarkably we find that the resonances have a Breit-Wigner line shape in transmission and a Fano line shape in reflection; by contrast, in the corresponding Hermitian case the line shapes always have a Breit-Wigner form in both transmission and reflection.

Enhanced methanol electro-oxidation reaction on Pt-CoOx/MWCNTs hybrid electro-catalyst

International Nuclear Information System (INIS)

Nouralishahi, Amideddin; Rashidi, Ali Morad; Mortazavi, Yadollah; Khodadadi, Abbas Ali; Choolaei, Mohammadmehdi

2015-01-01

Highlights: • Promoting effects of Cobalt oxide on methanol electro-oxidation over Pt/MWCNTs are investigated. • Higher activity, about 2.9 times, and enhanced stability are observed on Pt-CoO x /MWCNTs. • Electrochemical active surface area of Pt nanoparticles is significantly improved upon CoO x addition. • Bi-functional mechanism is facilitated in presence of CoO x . - Abstract: The electro-catalytic behavior of Pt-CoO x /MWCNTs in methanol electro-oxidation reaction (MOR) is investigated and compared to that of Pt/MWCNTs. The electro-catalysts were synthesized by an impregnation method using NaBH 4  as the reducing agent. The morphological and physical characteristics of samples are examined by XRD, TEM, ICP and EDS techniques. In the presence of CoO x , Pt nanoparticles were highly distributed on the support with an average particle size of 2 nm, an obvious decrease from 5.1 nm for Pt/MWCNTs. Cyclic voltammetry, CO-stripping, Chronoamperometry, and electrochemical impedance spectroscopy (EIS) measurements are used to study the electrochemical behavior of the electro-catalysts. The results revealed a considerable enhancement in the oxidation kinetics of CO ads on Pt active sites by the participation of CoO x . Compared to Pt/MWCNTs, Pt-CoO x /MWCNTs sample has a larger electrochemical active surface area (ECSA) and higher electro-catalytic activity and stability toward methanol electro-oxidation. According to the results of cyclic voltammetry, the forward anodic peak current density enhances more than 89% at the optimum atomic ratio of Pt:Co = 2:1. Furthermore, inclusion of cobalt oxide species causes the onset potential of methanol electro-oxidation reaction to shift 84 mV to negative values compared to that on Pt/MWCNTs. Based on EIS data, dehydrogenation of methanol is the rate-determining step of MOR on both Pt/MWCNTs and Pt-CoO x /MWCNTs, at small overpotentials. However, at higher overpotentials, the oxidation of adsorbed oxygen-containing groups

The effects of transport by car on coagulation tests.

Science.gov (United States)

Ergin, Merve; Erdogan, Serpil; Akturk, Onur; Erel, Ozcan

2017-10-26

This research investigated the effects of the transport of blood samples between centers/laboratories by car on coagulation tests. Five tubes of blood samples were taken from 20 healthy volunteers. The samples consisted of a baseline (control) group, centrifuged and noncentrifuged transported samples; centrifuged and noncentrifuged untransported samples. The groups of centrifuged and noncentrifuged samples were transported by car for 2 h. The centrifuged and noncentrifuged untransported samples were incubated in the laboratory until the transported samples arrived. Prothrombin time (PT) and activated partial thromboplastin time (APTT) tests were conducted for all samples. Significant differences between the baseline group and the centrifuged and noncentrifuged transported samples and the noncentrifuged untransported samples were found for APTT levels (pcar.

Pt-Richcore/Sn-Richsubsurface/Ptskin Nanocubes As Highly Active and Stable Electrocatalysts for the Ethanol Oxidation Reaction.

Science.gov (United States)

Rizo, Rubén; Arán-Ais, Rosa M; Padgett, Elliot; Muller, David A; Lázaro, Ma Jesús; Solla-Gullón, José; Feliu, Juan M; Pastor, Elena; Abruña, Héctor D

2018-03-14

Direct ethanol fuel cells are one of the most promising electrochemical energy conversion devices for portable, mobile and stationary power applications. However, more efficient and stable and less expensive electrocatalysts are still required. Interestingly, the electrochemical performance of the electrocatalysts toward the ethanol oxidation reaction can be remarkably enhanced by exploiting the benefits of structural and compositional sensitivity and control. Here, we describe the synthesis, characterization, and electrochemical behavior of cubic Pt-Sn nanoparticles. The electrochemical activity of the cubic Pt-Sn nanoparticles was found to be about three times higher than that obtained with unshaped Pt-Sn nanoparticles and six times higher than that of Pt nanocubes. In addition, stability tests indicated the electrocatalyst preserves its morphology and remains well-dispersed on the carbon support after 5000 potential cycles, while a cubic (pure) Pt catalyst exhibited severe agglomeration of the nanoparticles after a similar stability testing protocol. A detailed analysis of the elemental distribution in the nanoparticles by STEM-EELS indicated that Sn dissolves from the outer part of the shell after potential cycling, forming a ∼0.5 nm Pt skin. This particular atomic composition profile having a Pt-rich core, a Sn-rich subsurface layer, and a Pt-skin surface structure is responsible for the high activity and stability.

In Situ Generation of Pd-Pt Core-Shell Nanoparticles on Reduced Graphene Oxide (Pd@Pt/rGO) Using Microwaves: Applications in Dehalogenation Reactions and Reduction of Olefins.

Science.gov (United States)

Goswami, Anandarup; Rathi, Anuj K; Aparicio, Claudia; Tomanec, Ondrej; Petr, Martin; Pocklanova, Radka; Gawande, Manoj B; Varma, Rajender S; Zboril, Radek

2017-01-25

Core-shell nanocatalysts are a distinctive class of nanomaterials with varied potential applications in view of their unique structure, composition-dependent physicochemical properties, and promising synergism among the individual components. A one-pot microwave (MW)-assisted approach is described to prepare the reduced graphene oxide (rGO)-supported Pd-Pt core-shell nanoparticles, (Pd@Pt/rGO); spherical core-shell nanomaterials (∼95 nm) with Pd core (∼80 nm) and 15 nm Pt shell were nicely distributed on the rGO matrix in view of the choice of reductant and reaction conditions. The well-characterized composite nanomaterials, endowed with synergism among its components and rGO support, served as catalysts in aromatic dehalogenation reactions and for the reduction of olefins with high yield (>98%), excellent selectivity (>98%) and recyclability (up to 5 times); both Pt/rGO and Pd/rGO and even their physical mixtures showed considerably lower conversions (20 and 57%) in dehalogenation of 3-bromoaniline. Similarly, in the reduction of styrene to ethylbenzene, Pd@Pt core-shell nanoparticles (without rGO support) possess considerably lower conversion (60%) compared to Pd@Pt/rGO. The mechanism of dehalogenation reactions with Pd@Pt/rGO catalyst is discussed with the explicit premise that rGO matrix facilitates the adsorption of the reducing agent, thus enhancing its local concentration and expediting the hydrazine decomposition rate. The versatility of the catalyst has been validated via diverse substrate scope for both reduction and dehalogenation reactions.

Electrochemical fabrication of clean dendritic Au supported Pt clusters for electrocatalytic oxidation of formic acid

International Nuclear Information System (INIS)

Xia Yue; Liu Jun; Huang Wei; Li Zelin

2012-01-01

Highlights: ► A smooth Au surface was rebuilt into clean dendrite via square wave potential pulses. ► It was performed in blank H 2 SO 4 solution without Au(III) species and other additives. ► Dendritic Au provided certain advantage for dispersing Pt due to its unique structure. ► Pt-decorated dendritic Au demonstrated high activity for the HCOOH electrooxidation. - Abstract: We report here the fabrication of clean dendritic gold (DG) directly on a smooth Au electrode via square wave potential pulses (SWPPs) in a blank H 2 SO 4 solution containing no Au(III) species and additives. The effects of potential range, frequency and duration time of SWPPs and H 2 SO 4 concentration on the construction of DG were systematically investigated. A possible mechanism was proposed to explain the growth of DG. The whole process was templateless and surfactantless, and therefore effectively avoided possible contaminations that occurred in other synthetic routes. Further, the prepared DG electrode functioned as a scaffold to support electrodeposited Pt clusters, producing Pt-decorated DG (Pt-DG) electrodes. The electrocatalytic properties of Pt-DG electrodes with various Pt loadings were examined for the oxidation of formic acid. The low Pt loading Pt-DG demonstrated different electrochemical behavior from that on Pt-decorated smooth gold (Pt-SG) and on Pt-decorated gold nanoparticles because there were more defect sites like steps and edges on the DG surface. Ensemble effect, as well as electronic effect, accounts for the improved electrocatalytic activity of low Pt loading Pt-DG.

Electrochemical Synthesis of Mesoporous CoPt Nanowires for Methanol Oxidation

Directory of Open Access Journals (Sweden)

Albert Serrà

2014-03-01

Full Text Available A new electrochemical method to synthesize mesoporous nanowires of alloys has been developed. Electrochemical deposition in ionic liquid-in-water (IL/W microemulsion has been successful to grow mesoporous CoPt nanowires in the interior of polycarbonate membranes. The viscosity of the medium was high, but it did not avoid the entrance of the microemulsion in the interior of the membrane’s channels. The structure of the IL/W microemulsions, with droplets of ionic liquid (4 nm average diameter dispersed in CoPt aqueous solution, defined the structure of the nanowires, with pores of a few nanometers, because CoPt alloy deposited only from the aqueous component of the microemulsion. The electrodeposition in IL/W microemulsion allows obtaining mesoporous structures in which the small pores must correspond to the size of the droplets of the electrolytic aqueous component of the microemulsion. The IL main phase is like a template for the confined electrodeposition. The comparison of the electrocatalytic behaviours towards methanol oxidation of mesoporous and compact CoPt nanowires of the same composition, demonstrated the porosity of the material. For the same material mass, the CoPt mesoporous nanowires present a surface area 16 times greater than compact ones, and comparable to that observed for commercial carbon-supported platinum nanoparticles.

Optimum Pt and Ru atomic composition of carbon-supported Pt-Ru alloy electrocatalyst for methanol oxidation studied by the polygonal barrel-sputtering method

International Nuclear Information System (INIS)

Hiromi, Chikako; Inoue, Mitsuhiro; Taguchi, Akira; Abe, Takayuki

2011-01-01

Highlights: → The sputtered Pt and Ru form the Pt-Ru alloy nanoparticles on the carbon support. → The deposited Pt-Ru alloy particles have uniform Pt:Ru atomic ratios. → The optimum Pt:Ru ratio of the Pt-Ru/C for methanol oxidation is 58:42 at.% at 25 deg. C. → The optimum Pt:Ru ratio of 58:42 shifts to 50:50 at.% at 40 and 60 deg. C. → The polygonal barrel-sputtering method is useful to prepare the DMFC anode catalyst. - Abstract: The optimum Pt and Ru atomic composition of a carbon-supported Pt-Ru alloy (Pt-Ru/C) used in a practical direct methanol fuel cell (DMFC) anode was investigated. The samples were prepared by the polygonal barrel-sputtering method. Based on the physical properties of the prepared Pt-Ru/C samples, the Pt-Ru alloy was found to be deposited on a carbon support. The microscopic characterization showed that the deposited alloy forms nanoparticles, of which the atomic ratios of Pt and Ru (Pt:Ru ratios) are uniform and are in accordance with the overall Pt:Ru ratios of the samples. The formation of the Pt-Ru alloy is also supported by the electrochemical characterization. Based on these results, methanol oxidation on the Pt-Ru/C samples was measured by cyclic voltammetry and chronoamperometry. The results indicated that the methanol oxidation activities of the prepared samples depended on the Pt:Ru ratios, of which the optimum Pt:Ru ratio is 58:42 at.% at 25 deg. C and 50:50 at.% at 40 and 60 deg. C. This temperature dependence of the optimum Pt:Ru ratio is well explained by the relationship between the methanol oxidation reaction process and the temperature, which is reflected in the rate-determining steps considered from the activation energies. It should be noted that at 25-60 deg. C, the Pt-Ru/C with Pt:Ru = 50:50 at.% prepared by our sputtering method has the higher methanol oxidation activity than that of a commercially available sample with the identical overall Pt:Ru ratio. Consequently, the polygonal barrel-sputtering method

Perancangan Promosi Digital PT Campina Di Surabaya

OpenAIRE

Wijaya, Fernando; Hartanto, Deddi Duto; Sylvia, Merry

2013-01-01

Perancangan ini dilakukan untuk mempromosikan PT. Campina Ice Cream Industry beserta produknya. PT. Campina Ice Cream Industry diangkat sebagai topic perancangan karena banyak competitor-kompetitor yang bermunculan. Dengan melihat berbagai kelebihan dan kekurangan PT. Campina Ice Cream Industry, promosi dirancang agar dapat menggambarkan kelebihan PT. Campina Ice Cream Industry. Sehingga diharapkan dapat mengingatkan kembali ice cream Campina dalam benak konsumen. Untuk media promosi digital...

A method for the formation of Pt metal nanoparticle arrays using nanosecond pulsed laser dewetting

Energy Technology Data Exchange (ETDEWEB)

Owusu-Ansah, Ebenezer; Horwood, Corie A.; Birss, Viola I.; Shi, Yujun J., E-mail: shiy@ucalgary.ca [Department of Chemistry, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); El-Sayed, Hany A. [Institute for Technical Electrochemistry, Technische Universität München, D-85748 Garching (Germany)

2015-05-18

Nanosecond pulsed laser dewetting of Pt thin films, deposited on a dimpled Ta (DT) surface, has been studied here in order to form ordered Pt nanoparticle (NP) arrays. The DT substrate was fabricated via a simple electrochemical anodization process in a highly concentrated H{sub 2}SO{sub 4} and HF solution. Pt thin films (3–5 nm) were sputter coated on DT and then dewetted under vacuum to generate NPs using a 355 nm laser radiation (6–9 ns, 10 Hz). The threshold laser fluence to fully dewet a 3.5 nm thick Pt film was determined to be 300 mJ/cm{sup 2}. Our experiments have shown that shorter irradiation times (≤60 s) produce smaller nanoparticles with more uniform sizes, while longer times (>60 s) give large nanoparticles with wider size distributions. The optimum laser irradiation time of 1 s (10 pulses) has led to the formation of highly ordered Pt nanoparticle arrays with an average nanoparticle size of 26 ± 3 nm with no substrate deformation. At the optimum condition of 1 s and 500 mJ/cm{sup 2}, as many as 85% of the dewetted NPs were found neatly in the well-defined dimples. This work has demonstrated that pulsed laser dewetting of Pt thin films on a pre-patterned dimpled substrate is an efficient and powerful technique to produce highly ordered Pt nanoparticle arrays. This method can thus be used to produce arrays of other high-melting-point metal nanoparticles for a range of applications, including electrocatalysis, functionalized nanomaterials, and analytical purposes.

The Prothrombin G20210A Mutation is Associated with Young-Onset Stroke: The Genetics of Early Onset Stroke Study and Meta-Analysis

Science.gov (United States)

Jiang, Baijia; Ryan, Kathleen A.; Hamedani, Ali; Cheng, Yuching; Sparks, Mary J.; Koontz, Deborah; Bean, Christopher J.; Gallagher, Margaret; Hooper, W. Craig; McArdle, Patrick F.; O'Connell, Jeffrey R.; Stine, O. Colin; Wozniak, Marcella A.; Stern, Barney J.; Mitchell, Braxton D.; Kittner, Steven J.; Cole, John W.

2014-01-01

Background and Purpose Although the prothrombin G20210A mutation has been implicated as a risk factor for venous thrombosis, its role in arterial ischemic stroke is unclear, particularly among young-adults. To address this issue, we examined the association between prothrombin G20210A and ischemic stroke in a Caucasian case-control population and additionally performed a meta-analysis Methods From the population-based Genetics of Early Onset Stroke (GEOS) study we identified 397 individuals of European ancestry aged 15-49 years with first-ever ischemic stroke and 426 matched-controls. Logistic regression was used to calculate odds ratios in the entire population and for subgroups stratified by gender, age, oral contraceptive use, migraine and smoking status. A meta-analysis of 17 case-control studies (n=2305 cases ischemic stroke did not achieve statistical significance (OR=2.5,95%CI=0.9-6.5,p=0.07). However, among adults aged 15-42 (younger than median age), cases were significantly more likely than controls to have the mutation (OR=5.9,95%CI=1.2-28.1,p=0.03), whereas adults ages 42-49 were not (OR=1.4,95%CI=0.4-5.1,p=0.94). In our meta-analysis, the mutation was associated with significantly increased stroke risk in adults ischemic stroke in young-adults and may have an even stronger association among those with earlier onset strokes. Our finding of a stronger association in the younger-young adult population requires replication. PMID:24619398

CTAB assisted microwave synthesis of ordered mesoporous carbon supported Pt nanoparticles for hydrogen electro-oxidation

International Nuclear Information System (INIS)

Zhou, Jian-Hua; He, Jian-Ping; Ji, Ya-Jun; Dang, Wang-Juan; Liu, Xiao-Lei; Zhao, Gui-Wang; Zhang, Chuan-Xiang; Zhao, Ji-Shuang; Fu, Qing-Bin; Hu, Huo-Ping

2007-01-01

Mesoporous carbon with ordered hexagonal structure derived from the co-assembly of triblock copolymer F127 and resol was employed as the carbon support of Pt catalysts for hydrogen electro-oxidation. Structural characterizations revealed that the mesoporous carbon exhibited large surface area and uniform mesopores. The Pt nanoparticles supported on the novel mesoporous carbon were fabricated by a facile CTAB assisted microwave synthesis process, wherein CTAB was expected to improve the wettability of carbon support as well as the dispersion of Pt nanoparticles. X-ray diffraction and transmission electron microscopy were applied to characterize the Pt catalysts. It was found that the Pt nanoparticles were uniform in size and highly dispersed on the mesoporous carbon supports. The cyclic voltammograms in sulfuric acid demonstrated that the electrochemical active surface area of Pt catalysts prepared with CTAB was two times than that without CTAB

Correlation between HBsAg, prothrombin time activity, and indocyanine green retention rate at 15 minutes in patients with HBeAg-positive chronic HBV infection

Directory of Open Access Journals (Sweden)

FAN Wenhai

2016-11-01

Full Text Available ObjectiveTo investigate the correlation between HBsAg, prothrombin time activity (PTA, and indocyanine green retention rate at 15 minutes (ICG R15 in patients with HBeAg-positive chronic HBV infection. MethodsA total of 92 patients with HBeAg-positive chronic HBV infection who were admitted to The First Hospital of Lanzhou University from December 2015 to April 2016 were enrolled and divided into chronic hepatitis B (CHB group (24 patients, compensated liver cirrhosis group (38 patients, and decompensated liver cirrhosis group (30 patients. Serum HBsAg quantitation, PTA test, and liver reserve function test (ICG R15 were performed for all patients. The chi-square test was used for comparison of categorical data between groups, an analysis of variance was used for comparison of continuous data between multiple groups, and a Pearson correlation analysis was also performed. ResultsThere were significant differences between the three groups in serum HBsAg quantitation (3.82±0.43 log10IU/ml vs 2.88±0.36 log10IU/ml vs 2.60±0.27 log10IU/ml, F=25.19, P＜0.001, ICG R15 (7.51%±3.10% vs 9.57%±8.18% vs 24.13%±14.28%, F=24.00, P=0.001, and PTA (8100%±1762% vs 83.08%±9.64% vs 62.32%±16.90%, F=13.42, P=0.009. The correlation analysis showed that PTA was negatively correlated with ICG R15 in all three groups (r=-0.948, -0.602, and -0.735, all P＜0.01. In the compensated liver cirrhosis group and decompensated liver cirrhosis group, HBsAg was positively correlated with PTA (r=0.410 and 0.473, both P＜0.05 and negatively correlated with ICG R15 (r=-0.427 and -0.768, P＜0.01. ConclusionIn HBeAg positive patients, there are certain correlations between HBsAg, PTA, and ICG R15, which, to a certain degree, reflects the liver reserve function in patients with chronic HBV infection.

Mechanical properties of non-centrosymmetric CePt3Si and CePt3B

Science.gov (United States)

Rogl, G.; Legut, D.; Sýkora, R.; Müller, P.; Müller, H.; Bauer, E.; Puchegger, S.; Zehetbauer, M.; Rogl, P.

2017-05-01

Elastic moduli, hardness (both at room temperature) and thermal expansion (4.2-670 K) have been experimentally determined for polycrystalline CePt3Si and its prototype compound CePt3B as well as for single-crystalline CePt3Si. Resonant ultrasound spectroscopy was used to determine elastic properties (Young’s modulus E and Poisson’s ratio ν) via the eigenfrequencies of the sample and the knowledge of sample mass and dimensions. Bulk and shear moduli were calculated from E and ν, and the respective Debye temperatures were derived. In addition, ab initio DFT calculations were carried out for both compounds. A comparison of parameters evaluated from DFT with those of experiments revealed, in general, satisfactory agreement. Positive and negative thermal expansion values obtained from CePt3Si single crystal data are fairly well explained in terms of the crystalline electric field model, using CEF parameters derived recently from inelastic neutron scattering. DFT calculations, in addition, demonstrate that the atomic vibrations keep almost unaffected by the antisymmetric spin-orbit coupling present in systems with crystal structures having no inversion symmetry. This is opposite to electronic properties, where the antisymmetric spin-orbit interaction has shown to distinctly influence features like the superconducting condensate of CePt3Si.

Single-Atom Pt as Co-Catalyst for Enhanced Photocatalytic H2 Evolution.

Science.gov (United States)

Li, Xiaogang; Bi, Wentuan; Zhang, Lei; Tao, Shi; Chu, Wangsheng; Zhang, Qun; Luo, Yi; Wu, Changzheng; Xie, Yi

2016-03-23

Isolated single-atom platinum (Pt) embedded in the sub-nanoporosity of 2D g-C3 N4 as a new form of co-catalyst is reported. The highly stable single-atom co-catalyst maximizes the atom efficiency and alters the surface trap states of g-C3 N4 , leading to significantly enhanced photocatalytic H2 evolution activity, 8.6 times higher than that of Pt nanoparticles and up to 50 times that for bare g-C3 N4 . © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Longitudinal recording on FePt and FePtX (X = B, Ni) intermetallic compounds

Science.gov (United States)

Li, Ning

1999-11-01

Near field recording on high coercivity FePt intermetallic compound media using a high Bsat write element was investigated. Untextured FePt media were prepared by magnetron sputtering on ZrO2 disks at a substrate temperature of 450°C, with post annealing at 450°C for 8 hrs. Both multilayer and cosputtered precursors produced the ordered tetragonal L10 phase with high coercivity between 5kOe and 12kOe. To improve readback noise decrease magnetic domain size, FePtB media were subsequently prepared by cosputtering. Over-write, roll-off, signal to noise ratio and non-linear transition shift (NLTS) ere measured by both metal in gap (MIG) and merged MR heads. FePtB media showed similar NLTS to commercial CoCrPtTa longitudinal media, but 5dB lower signal to noise ratio. By operating recording transducers in near contact, reasonable values of (>30dB) could be obtained. VSM Rotational Transverse Magnetization has been used for measuring the anisotropy field of magnetic thin films. Magnetization reversal during rotation of a 2D isotropic an applied field is discussed. The relationship between the transverse magnetization My and the applied field H was numerically solved. An excellent approximation for the transverse magnetization is found to be: My/Ms=A(1- H/Hk) 2.5, where A = 1.1434, and Hk is the anisotropy field. For curve fitting to experimental data, both A and Hk were used as fitting parameters. Comparison between a constructed torque hysteresis method and this VSM RTM method have been made theoretically and experimentally. Both results showed that VSM RTM will give better extrapolation of the anisotropy field. The torque measurement will slightly overestimate the anisotropy field. The anisotropy fields of FePt and FePtX (X = B, Ni) films were characterized using this VSM RTM technique with comparison to a CoCrTaPt disk. Anisotropy energy was derived. Hc/Hk was used as an indicator for coherent rotation of a single domain. Interactions between magnetic domains were

First principles study of (Cd, Hg, In, Tl, Sn, Pb, As, Sb, Bi, Se) modified Pt(111), Pt(100) and Pt(211) electrodes as CO oxidation catalysts

DEFF Research Database (Denmark)

Tripkovic, Vladimir

2015-01-01

. The coverage dependence as a function of potential for ten different adatom species (Cd, Hg, In, Tl, Sn, Pb, As, Sb, Bi, Se) on bare and CO saturated Pt(111), Pt(100) and Pt(211) surfaces has been established by means of Density Functional Theory calculations. Most of the adatoms are very stable under standard......, given by the OH formation potentials from water, is dependent on the oxophilicity of the adatoms, and is found to scale almost inversely with the adatom stability. In electrolyte solutions saturated with CO, the stability reduces to roughly half of that on bare Pt surfaces. Irrespective of the CO...

Synthesis and characteristics of Ag/Pt bimetallic nanocomposites by arc-discharge solution plasma processing.

Science.gov (United States)

Pootawang, Panuphong; Saito, Nagahiro; Takai, Osamu; Lee, Sang-Yul

2012-10-05

Arc discharge in solution, generated by applying a high voltage of unipolar pulsed dc to electrodes of Ag and Pt, was used as a method to form Ag/Pt bimetallic nanocomposites via electrode erosion by the effects of the electric arc at the cathode (Ag rod) and the sputtering at the anode (Pt rod). Ag/Pt bimetallic nanocomposites were formed as colloidal particles dispersed in solution via the reduction of hydrogen radicals generated during discharge without the addition of chemical precursor or reducing agent. At a discharge time of 30 s, the fine bimetallic nanoparticles with a mean particle size of approximately 5 nm were observed by transmission electron microscopy (TEM). With increasing discharge time, the bimetallic nanoparticle size tended to increase by forming an agglomeration. The presence of the relatively small amount of Pt dispersed in the Ag matrix could be observed by the analytical mapping mode of energy-dispersive x-ray spectroscopy and high-resolution TEM. This demonstrated that the synthesized particle was in the form of a nanocomposite. No contamination of other chemical substances was detected by x-ray photoelectron spectroscopy. Hence, solution plasma could be a clean and simple process to effectively synthesize Ag/Pt bimetallic nanocomposites and it is expected to be widely applicable in the preparation of several types of nanoparticle.

Visible light photoactivity of TiO{sub 2} loaded with monometallic (Au or Pt) and bimetallic (Au/Pt) nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Gołąbiewska, Anna, E-mail: annagolabiewska@o2.pl [Department of Chemical Technology, Gdansk University of Technology, 80-233 Gdańsk (Poland); Lisowski, Wojciech [Mazovia Center for Surface Analysis, Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warsaw (Poland); Jarek, Marcin; Nowaczyk, Grzegorz [NanoBioMedical Center, Adam Mickiewicz University, Umultowska 85, 61-614 Poznań (Poland); Zielińska-Jurek, Anna; Zaleska, Adriana [Department of Chemical Technology, Gdansk University of Technology, 80-233 Gdańsk (Poland)

2014-10-30

Graphical abstract: - Highlights: • Au/Pt nanoparticles enhanced TiO{sub 2} photocatalytic activity under visible irradiation. • Higher photoactivity of Au/Pt-TiO{sub 2} resulted from smaller Au/Pt particles. • Intermetallic state of AuPt favors charge transfer between the metals. • TiO{sub 2} obtained by TIP hydrolysis seems to be best matrix for Au/Pt-TiO{sub 2}. - Abstract: TiO{sub 2} modified with monometallic (Au or Pt) and bimetallic (Au/Pt) nanoparticles have been prepared using a water-in-oil microemulsion system (water/AOT/cyclohexane) followed by calcination step. The effect of metal ratio, reducing agent type (NaBH{sub 4} or N{sub 2}H{sub 4}), TiO{sub 2} matrix type (P-25, ST-01, TiO-5, TiO{sub 2} nanotubes or TiO{sub 2} obtained by TIP hydrolysis) as well as calcination temperature (from 350 to 650 °C) were systematically investigated. Obtained photocatalysts were characterized by UV–vis diffuse-reflectance spectroscopy (DRS), BET surface area measurements, scanning transmission microscopy (STEM), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS). Photocatalytic activity under visible light (λ > 420 nm) has been estimated in phenol degradation reaction in aqueous phase. The results showed that phenol degradation rate under visible light in the presence of TiO{sub 2} loaded with Au/Pt nanoparticles differed from 0.7 to 2.2 μmol dm{sup −3} min{sup −1} for samples prepared using different reducing agent. Sodium borohydride (NaBH{sub 4}) favors formation of smaller Au/Pt nanoparticles and higher amount gold in Au/Pt is in the form of electronegative species (Au{sup δ−}) resulted in higher photoactivity. TiO{sub 2} obtained by TIP hydrolysis in microemulsion system seems to be the best support for Au/Pt nanoparticles from all among investigated matrix. It was also observed that enhancement of calcination temperature from 450 to 650 °C resulted in rapid drop of Au/Pt-TiO{sub 2} photoactivity under visible light

Segregation and stability at Pt3Ni(1 1 1) surfaces and Pt75Ni25 nanoparticles

International Nuclear Information System (INIS)

Fowler, Ben; Lucas, Christopher A.; Omer, Ahmed; Wang, Guofeng; Stamenkovic, Vojislav R.; Markovic, Nenad M.

2008-01-01

Using in situ surface X-ray diffraction we have determined the atomic structure and stability of a Pt 3 Ni(1 1 1) surface in the electrochemical environment. Surface segregation leads to a pure Pt(1 1 1) skin with enrichment of Ni in the sub-surface atomic layer that determines the surface electronic structure. The Pt-skin surface exhibits inward relaxation upon the adsorption of oxygenated species and this explains the surface stability compared to pure Pt(1 1 1). Using Monte Carlo calculations it is shown that nanoparticles with the same surface composition and stochiometry are energetically stable

[False positive serum des-gamma-carboxy prothrombin after resection of hepatocellular carcinoma].

Science.gov (United States)

Hiramatsu, Kumiko; Tanaka, Yasuhito; Takagi, Kazumi; Iida, Takayasu; Takasaka, Yoshimitsu; Mizokami, Masashi

2007-04-01

Measurements of serum concentrations of des-gamma-carboxy-prothrombin (PIVKA-II) are widely used for diagnosing hepatocellular carcinoma (HCC). Recently, when we evaluated the correlation of PIVKA-II between two commercially available PIVKA-II immunoassay kits (Lumipulse f vs. Picolumi) to introduce it in our hospital, false high values of PIVKA-II were observed in Lumipulse assay. Four(4%) of 100 serum samples showed false high values, and all of them were obtained from patients less than 2 month after curative resection of HCC. Examining additional 7 patients with HCC resection, serum samples from the 5 patients had the same trend. To elucidate the non-specific reaction by Lumipulse assay which utilized alkaline phosphatase (ALP) enzymatic reaction, inhibition assays by various absorbents such as inactive ALP and IgM antibodies were performed. Excess of inactive ALP reduced the high values of PIVKA-II. Note that anti-bleeding sheets (fibrinogen combined drug), which included bovine thrombin, were directly attached on liver of all patients with HCC resection in this study. As the sheets also contaminate ALP and probably produce IgM antibodies to ALP, the IgM may cross-react with anti-PIVKA-II antibodies directly. Taken together, it was suggested that produced antibodies against ALP derived from anti-bleeding sheets led false high values of PIVKA-II in the patients with HCC resection.

New evaluation of alpha decay half-life of 190Pt isotope for the Pt-Os dating system

International Nuclear Information System (INIS)

Tavares, O.A.P.; Medeiros, E.L.; Terranova, M.L.

2005-08-01

A semiempirical model based on the quantum mechanical tunnelling mechanism of alpha emission from nuclei has been used to evaluate the half-life of the Pt isotopes. For the important naturally occurring 190 Pt isotope, the radiogenic parent in the 190 Pt → 186 Os dating system, the model yielded a half-life value of (3.7± 0.3) versus 10 11 y. This is comparable to (3.2±0.1) versus 10 11 y which was obtained in the last direct counting experiment to measure the alpha activity of 190 Pt (Tavares and Terranova, Rad. Measurem. 27 (1997) 19). A literature survey of available alpha decay half-life values for 190 Pt isotope is also reported. The significant discrepancies found between data obtained by direct counting, indirect geological methods and different calculation models are analysed and discussed. (author)

STRATEGI KONVERSI ENERGI DI PT. LION METAL WORKS Tbk.

Directory of Open Access Journals (Sweden)

Daud Sudradjad

2011-08-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} PT Lion Metal Works is a company producing office equipment, racking system, building material, security and fireproof safe, and cold forming. The production activity has high dependence on the usage of diesel, which influences the quality of the product and the cost of total business. The price fluctuation is one of the reasons for the company to convert the usage of diesel to some energy alternatives. Gas is the best alternative to replace diesel due to some advantages such as price, installation cost, distribution issue, calorie level, and environmental issue. There are some resistances from internal organization emerge in the implementation of the conversion. The alternatives strategy has been explored to reduce the resistances considering the goal of the organization, the actors (department in the company, and the type of resistance using analytical hierarchy process method. The priority strategy is establishing a new division for handling the conversion program and installing the gas facility gradually.

Highly open bowl-like PtAuAg nanocages as robust electrocatalysts towards ethylene glycol oxidation

Science.gov (United States)

Xu, Hui; Yan, Bo; Li, Shumin; Wang, Jin; Song, Pingping; Wang, Caiqin; Guo, Jun; Du, Yukou

2018-04-01

A novel combined seed mediated and galvanic replacement method has been demonstrated to synthesize a new class of trimetallic PtAuAg nanocatalysts with highly open bowl-like nanocage structure. The newly-generated PtAuAg nanocages catalysts exhibit superior electrocatalytic performances towards ethylene glycol oxidation with the mass activity of 6357.1 mA mg-1, 5.5 times higher than that of commercial Pt/C (1151.1 mA mg-1). This work demonstrates the first example of designing shape-controlled architectures of trimetallic bowl-like PtAuAg nanocages for liquid fuel electrooxidation.

Magnetization dynamics of perpendicular exchange-biased (Pt/Co)-Pt-IrMn multilayers studied by MOKE microscopy and magnetometry

Energy Technology Data Exchange (ETDEWEB)

Czapkiewicz, M.; Stobiecki, T.; Rak, R.; Zoladz, M.; Mietniowski, P. [Department of Electronics, AGH University of Science and Technology, 30-059 Krakow (Poland); Dijken, S. van [SFI Trinity Nanoscience Laboratory, Physics Department, Trinity College, Dublin 2 (Ireland)

2006-01-01

In this paper the dynamics of the magnetization reversal process in perpendicularly biased [20 Aa Pt/5 Aa Co]{sub 3}/t Aa Pt/100 Aa IrMn/20 Aa Pt multilayers with different Pt insertion layer thickness (0 Aa{<=}t{<=}12 Aa) is studied. The insertion of 1 Aa thick Pt enhances the exchange bias field (H{sub ex}) and for t>3 Aa H{sub ex} decreases exponentially with increasing Pt layer thickness. We show by magnetization relaxation measurements and direct observation of magnetic domains that magnetization reversal takes place by the nucleation of isolated cylindrical domains with a different nucleation site density in the forward and backward branches of the hysteresis loop. All the results were quantitatively analyzed using the Fatuzzo model for the dynamics of domain reversal processes. The activation energies for magnetization reversal by domain nucleation and domain propagation were determined. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Anticoagulant Effect of Sugammadex: Just an In Vitro Artifact.

Science.gov (United States)

Dirkmann, Daniel; Britten, Martin W; Pauling, Henning; Weidle, Juliane; Volbracht, Lothar; Görlinger, Klaus; Peters, Jürgen

2016-06-01

Sugammadex prolongs activated partial thromboplastin time (aPTT) and prothrombin time (PT) suggestive of anticoagulant effects. To pinpoint its presumed anticoagulant site of action, the authors assessed Sugammadex's impact on a panel of coagulation assays. Sugammadex, Rocuronium, Sugammadex and Rocuronium combined, or saline were added to blood samples from healthy volunteers and analyzed using plasmatic (i.e., aPTT, thrombin time, and fibrinogen concentration) (n = 8 each), PT (quick), activities of plasmatic coagulation factors, and whole blood (extrinsically and intrinsically activated thromboelastometry) assays (n = 18 each). Furthermore, dose-dependent effects of Sugammadex were also assessed (n = 18 each) in diluted Russel viper venom time (DRVVT) assays with low (DRVVT1) and high (DRVVT2) phospholipid concentrations and in a highly phospholipid-sensitive aPTT assay. Sugammadex increased PT (+9.1%; P Sugammadex dose-dependently prolonged both DRVVT1 and the highly phospholipid-sensitive aPTT assays, but additional phospholipids in the DRVVT2 assay almost abolished these prolongations. Thrombin time, a thromboelastometric thrombin generation assay, clot firmness, clot lysis, fibrinogen concentration, and activities of other coagulation factors were unaltered. Rocuronium, Sugammadex and Rocuronium combined, and saline exerted no effects. Sugammadex significantly affects various coagulation assays, but this is explainable by an apparent phospholipid-binding effect, suggesting that Sugammadex`s anticoagulant effects are likely an in vitro artifact.

Exmination of catalytic reduction of NO by CH4 in a Pt-polybenimidazole membrane-Pt system with and without polarization

DEFF Research Database (Denmark)

Petrushina, Irina; Cleemann, Lars Nilausen; Bjerrum, Niels

“NO reduction in the NO, CH4, Ar/Pt/C//polybenzimidazole-H3PO4//Pt/C/H2, Ar was studied at 135°C”......“NO reduction in the NO, CH4, Ar/Pt/C//polybenzimidazole-H3PO4//Pt/C/H2, Ar was studied at 135°C”...

CO oxidation on PtSn nanoparticle catalysts occurs at the interface of Pt and Sn oxide domains formed under reaction conditions

KAUST Repository

Michalak, William D.

2014-04-01

The barrier to CO oxidation on Pt catalysts is the strongly bound adsorbed CO, which inhibits O2 adsorption and hinders CO2 formation. Using reaction studies and in situ X-ray spectroscopy with colloidally prepared, monodisperse ∼2 nm Pt and PtSn nanoparticle catalysts, we show that the addition of Sn to Pt provides distinctly different reaction sites and a more efficient reaction mechanism for CO oxidation compared to pure Pt catalysts. To probe the influence of Sn, we intentionally poisoned the Pt component of the nanoparticle catalysts using a CO-rich atmosphere. With a reaction environment comprised of 100 Torr CO and 40 Torr O2 and a temperature range between 200 and 300 C, Pt and PtSn catalysts exhibited activation barriers for CO2 formation of 133 kJ/mol and 35 kJ/mol, respectively. While pure Sn is readily oxidized and is not active for CO oxidation, the addition of Sn to Pt provides an active site for O2 adsorption that is important when Pt is covered with CO. Sn oxide was identified as the active Sn species under reaction conditions by in situ ambient pressure X-ray photoelectron spectroscopy measurements. While chemical signatures of Pt and Sn indicated intermixed metallic components under reducing conditions, Pt and Sn were found to reversibly separate into isolated domains of Pt and oxidic Sn on the nanoparticle surface under reaction conditions of 100 mTorr CO and 40 mTorr O2 between temperatures of 200-275 C. Under these conditions, PtSn catalysts exhibited apparent reaction orders in O2 for CO 2 production that were 0.5 and lower with increasing partial pressures. These reaction orders contrast the first-order dependence in O 2 known for pure Pt. The differences in activation barriers, non-first-order dependence in O2, and the presence of a partially oxidized Sn indicate that the enhanced activity is due to a reaction mechanism that occurs at a Pt/Sn oxide interface present at the nanoparticle surface. © 2014 Published by Elsevier Inc.

Sol-Gel Process for Making Pt-Ru Fuel-Cell Catalysts

Science.gov (United States)

Narayanan, Sekharipuram; Valdez, Thomas; Kumta, Prashant; Kim, Y.

2005-01-01

A sol-gel process has been developed as a superior alternative to a prior process for making platinum-ruthenium alloy catalysts for electro-oxidation of methanol in fuel cells. The starting materials in the prior process are chloride salts of platinum and ruthenium. The process involves multiple steps, is time-consuming, and yields a Pt-Ru product that has relatively low specific surface area and contains some chloride residue. Low specific surface area translates to incomplete utilization of the catalytic activity that might otherwise be available, while chloride residue further reduces catalytic activity ("poisons" the catalyst). In contrast, the sol-gel process involves fewer steps and less time, does not leave chloride residue, and yields a product of greater specific area and, hence, greater catalytic activity. In this sol-gel process (see figure), the starting materials are platinum(II) acetylacetonate [Pt(C5H7O2)2, also denoted Pt-acac] and ruthenium(III) acetylacetonate [Ru(C5H7O2)3, also denoted Ru-acac]. First, Pt-acac and Ru-acac are dissolved in acetone at the desired concentrations (typically, 0.00338 moles of each salt per 100 mL of acetone) at a temperature of 50 C. A solution of 25 percent tetramethylammonium hydroxide [(CH3)4NOH, also denoted TMAH] in methanol is added to the Pt-acac/Ruacac/ acetone solution to act as a high-molecular-weight hydrolyzing agent. The addition of the TMAH counteracts the undesired tendency of Pt-acac and Ru-acac to precipitate as separate phases during the subsequent evaporation of the solvent, thereby helping to yield a desired homogeneous amorphous gel. The solution is stirred for 10 minutes, then the solvent is evaporated until the solution becomes viscous, eventually transforming into a gel. The viscous gel is dried in air at a temperature of 170 C for about 10 hours. The dried gel is crushed to make a powder that is the immediate precursor of the final catalytic product. The precursor powder is converted to the

Pt based anode catalysts for direct ethanol fuel cells

Energy Technology Data Exchange (ETDEWEB)

Zhou, Weijiang; Zhou, Zhenhua; Song, Shuqin; Li, Wenzhen; Sun, Gongquan; Xin, Qin [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, CAS, P.O. Box 110, Dalian 116023 (China); Tsiakaras, Panagiotis [Department of Mechanical and Industrial Engineering, University of Thessalia, Pedion Areos, GR 38334 Volos (Greece) 7

2003-11-10

In the present work several Pt-based anode catalysts supported on carbon XC-72R were prepared with a novel method and characterized by means of XRD, TEM and XPS analysis. It was found that all these catalysts are consisted of uniform nanosized particles with sharp distribution and Pt lattice parameter decreases with the addition of Ru or Pd and increases with the addition of Sn or W. Cyclic voltammetry (CV) measurements and single direct ethanol fuel cell (DEFC) tests jointly showed that the presence of Sn, Ru and W enhances the activity of Pt towards ethanol electro-oxidation in the following order: Pt{sub 1}Sn{sub 1}/C>Pt{sub 1}Ru{sub 1}/C>Pt{sub 1}W{sub 1}/C>Pt{sub 1}Pd{sub 1}/C>Pt/C. Moreover, Pt{sub 1}Ru{sub 1}/C further modified by W and Mo showed improved ethanol electro-oxidation activity, but its DEFC performance was found to be inferior to that measured for Pt{sub 1}Sn{sub 1}/C. Under this respect, several PtSn/C catalysts with different Pt/Sn atomic ratio were also identically prepared and characterized and their direct ethanol fuel cell performances were evaluated. It was found that the single direct ethanol fuel cell having Pt{sub 1}Sn{sub 1}/C or Pt{sub 3}Sn{sub 2}/C or Pt{sub 2}Sn{sub 1}/C as anode catalyst showed better performances than those with Pt{sub 3}Sn{sub 1}/C or Pt{sub 4}Sn{sub 1}/C. It was also found that the latter two cells exhibited higher performances than the single cell using Pt{sub 1}Ru{sub 1}/C, which is exclusively used in PEMFC as anode catalyst for both methanol electro-oxidation and CO-tolerance. This distinct difference in DEFC performance between the catalysts examined here would be attributed to the so-called bifunctional mechanism and to the electronic interaction between Pt and additives. It is thought that an amount of -OH{sub ads}, an amount of surface Pt active sites and the conductivity effect of PtSn/C catalysts would determine the activity of PtSn/C with different Pt/Sn ratios. At lower temperature values or at low

Monodispersed porous flowerlike PtAu nanocrystals as effective electrocatalysts for ethanol oxidation

Science.gov (United States)

Li, Shumin; Xu, Hui; Xiong, Zhiping; Zhang, Ke; Wang, Caiqin; Yan, Bo; Guo, Jun; Du, Yukou

2017-11-01

Designing and tuning the bimetallic nanoparticles with desirable morphology and structure can embody them with greatly enhanced electrocatalytic activity and stability towards liquid fuel oxidation. We herein reported a facile one-pot method for the controlled synthesis of monodispersed binary PtAu nanoflowers with abundant exposed surface area. Owing to its fantastic structure, synergistic and electronic effect, such as-prepared PtAu nanoflowers exhibited outstandingly high electrocatalytic activity with the mass activity of 6482 mA mg-1 towards ethanol oxidation, which is 28.3 times higher than that of commercial Pt/C (227 mA mg-1). More interesting, the present PtAu nanoflower catalysts are more stable for the ethanol oxidation reaction in the alkaline with lower current density decay and retained a much higher current density after successive CVs of 500 cycles than that of commercial Pt/C. This work may open a new way for maximizing the catalytic performance of electrocatalysts towards ethanol oxidation by synthesizing shape-controlled alloy nanoparticles with more surface active sites to enhance the performances of direct fuel cells reaction, chemical conversion, and beyond.

The kinetics and mechanism of methanol oxidation on Pt and PtRu catalysts in alkaline and acid media

Directory of Open Access Journals (Sweden)

JELENA LOVIC

2007-07-01

Full Text Available The kinetic of methanol electrochemical oxidation for a series of platinum and platinum–ruthenium catalysts was investigated. A correlation between the beginning of OHad adsorption and methanol oxidation was demonstarated on Pt single crystals and Pt nanocatalyst. The activity of the nano-structured Pt catalyst was compared with single crystal platinum electrodes assuming the Kinoshita model of nanoparticles. The ruthenium-containing catalysts shifted the onset of methanol oxidation to more negative potentials. The effect was more pronounced in acid than in alkaline media. Based on the established diagnostic criteria, the reaction between COad and OHad species according to the Langmuir–Hinshelwood mechanism was proposed as the rate determining step in alkaline and acid media on Pt and PtRu catalysts.

Electro-oxidation of ethanol and ethylene glycol on carbon-supported nano-Pt and -PtRu catalyst in acid solution

International Nuclear Information System (INIS)

Chatterjee, Moitrayee; Chatterjee, Abhik; Ghosh, Susanta; Basumallick, I.

2009-01-01

Present paper reports kinetics of electro-oxidation of ethanol (EtOH) and ethylene glycol (EG) onto Pt and PtRu nanocatalysts of different compositions in the temperature range of 298-318 K. These catalysts have been characterized by SEM, EDX, XRD, CV and amperometry. It has been observed that apparent activation energies for oxidation of EtOH and EG pass through a minimum at about 15-20 at.% of Ru in the PtRu alloy catalysts. Anodic peak current vs. composition curve also shows a maximum around this composition. The results have been explained by a geometric model, which proposes requirement of an ensemble of three Pt atoms with an adjacent Ru atom onto PtRu surface for an efficient electro-oxidation of EtOH or EG. This is further supported from statistical data analysis of probability of occurrence of such ensembles onto PtRu alloy surface. Present results also suggest that electro-oxidation of EG onto nano-PtRu catalyst surfaces follows a different path from that of EtOH at alloy composition less than 15 at.% of Ru.

Electro-oxidation of ethanol and ethylene glycol on carbon-supported nano-Pt and -PtRu catalyst in acid solution

Energy Technology Data Exchange (ETDEWEB)

Chatterjee, Moitrayee; Chatterjee, Abhik; Ghosh, Susanta [Electrochemical Laboratory, Department of Chemistry, Visva-Bharati University, Santiniketan 731235 (India); Basumallick, I., E-mail: ibasumallick@yahoo.co.u [Electrochemical Laboratory, Department of Chemistry, Visva-Bharati University, Santiniketan 731235 (India)

2009-12-01

Present paper reports kinetics of electro-oxidation of ethanol (EtOH) and ethylene glycol (EG) onto Pt and PtRu nanocatalysts of different compositions in the temperature range of 298-318 K. These catalysts have been characterized by SEM, EDX, XRD, CV and amperometry. It has been observed that apparent activation energies for oxidation of EtOH and EG pass through a minimum at about 15-20 at.% of Ru in the PtRu alloy catalysts. Anodic peak current vs. composition curve also shows a maximum around this composition. The results have been explained by a geometric model, which proposes requirement of an ensemble of three Pt atoms with an adjacent Ru atom onto PtRu surface for an efficient electro-oxidation of EtOH or EG. This is further supported from statistical data analysis of probability of occurrence of such ensembles onto PtRu alloy surface. Present results also suggest that electro-oxidation of EG onto nano-PtRu catalyst surfaces follows a different path from that of EtOH at alloy composition less than 15 at.% of Ru.

Enhanced Activity and Durability of Nanosized Pt-SnO2/IrO2/CNTs Catalyst for Methanol Electrooxidation.

Science.gov (United States)

Wang, Hongjuan; Wang, Xiaohui; Zheng, Jiadao; Peng, Feng; Yu, Hao

2015-05-01

Pt-SnO2/IrO2/CNTs anode catalyst for direct methanol fuel cell was designed and prepared with IrO2/CNTs as support for the subsequent immobilization of Pt and SnO2 at the same time. The structure of the catalysts and their catalytic performance in methanol electrooxidation were investigated and the roles of IrO2 and SnO2 in methanol electrooxidation were discussed as well. Results show that Pt-SnO2/IrO2/CNTs catalyst exhibits the best activity and durability for methanol electrooxidation when compared with Pt/CNTs, Pt/IrO2/CNTs and Pt-SnO2/CNTs. According to the results of electrochemical tests and physicochemical characterizations, the enhancements of Pt-SnO2/IrO2/CNTs were attributed to the special properties of IrO2 and SnO2, in which IrO2 mainly increases the methanol oxidation activity and SnO2 mainly improves the CO oxidation ability and durability. Therefore, Pt-SnO2/IrO2/CNTs exhibits excellent performance for methanol oxidation with higher electrocatalytic activity (I(f) of 1054 A g(Pt(-1)) and powerful anti-poisoning ability (the onset potential for CO oxidation of 0.3 V) and outstanding durability (the sustained time t in CP of 617 s), revealing a suitable anode catalyst for DMFCs.

Coagulation abnormalities in patients with chronic liver disease in Pakistan

International Nuclear Information System (INIS)

Siddiqui, S.A.; Ghani, M.H.; Ghori, M.A.; Ahmed, M.

2011-01-01

Objective: To determine the coagulation abnormalities and relationship between abnormal clotting tests and the risk of gastrointestinal bleeding (GI) among chronic liver disease (CLD) patients admitted at a tertiary care hospital in Pakistan. Methods: Adult CLD patients admitted at Liaquat University Hospital Jamshoro, during Nov 2004 - Oct 2005, were included in the study. The patients blood were tested for coagulation abnormalities including prothrombin time (PT), activated partial thromboplastin time (aPTT), platelet count and plasma fibrinogen. Association was seen between the abnormal clotting tests and the gastrointestinal bleeding by calculating relative risk (RR) with 95% confidence interval. Results: PT was prolonged in 88% and aPTT was raised in 71% cases of CLD. Both PT and aPTT were prolonged in 67% CLD cases. Approximately 37% CLD cases had decreased platelet count and 15% cases had decreased serum fibrinogen level. Relative risk of GI bleeding with abnormal clotting tests in CLD cases were weakly positive for PT (RR = 1.02; 95% CI, 0.49-2.10), negative for aPTT (RR=0.83; 95% CI, 0.47-1.45), strongly positive for decreased platelet counts (RR = 1.96; 95% CI, 1.08-3.56) and also for decreased fibrinogen level (RR = 1.47; 95% CI, 0.64-3.35). Conclusion: Coagulation abnormalities were profound in CLD. Decrease platelet counts and fibrinogen levels were related with GI bleeding but PT and aPTT were not significantly related with GI bleeding in patients with chronic liver disease. Nevertheless, these parameters (PT and aPTT) were still used as prognostic markers. (author)

PERBAIKAN KEBIJAKAN PENGENDALIAN PERSEDIAAN JUST IN TIME KOMPONEN PRODUK MAIN FLOOR SIDE LH PADA PT GAYA MOTOR

Directory of Open Access Journals (Sweden)

Bella Suciana Istiqomah

2015-06-01

Full Text Available PT . Gaya Motor is a manufacturing company that is engaged in the assembly and production of automotive components incorporated in the group of PT Astra International.Perusahaan implement inventory control system Just In Time.Kanban’s supplier with safety stock of 0.5 days plus a safety stock of 0.5 extra days beyond the kanban. The study was conducted on the material supply products Main Floor Side LH SA - 001 , SA - 002 , SA - 003 , SA - 004 , SA - 005 , SA - 006 , SA - 007 , SA - 008 and SA - 009. Problems faced by the company are the high amount of inventory caused by inaccurate inventory systems and fault current in raw material procurement procedures. The purpose of this study was to evaluate the company's current inventory control system and propose improvements inventory control system that can minimize inventory costs compared to the cost of inventory at the company's current inventory system.Kanban inventory method supplier company currently has a total cost of inventory of Rp 318.861.462,00. Supplier kanban inventory control methods with safety stock kanban 0.1 days has a total cost of inventory of Rp 158.703.378,00. Inventory control methods Two - Bin Replenishment has a total inventory cost of Rp 98.497.214,00. From the results of these calculations, the minimum inventory cost obtained by using the method of inventory Two - Bin Replenishment, and made proposals related to changes in inventory control system.

Double-layered perpendicular magnetic recording media of granular-type FePt-MgO films

International Nuclear Information System (INIS)

Zhang Zhengang; Singh, Amarendra K.; Yin Jinhua; Perumal, A.; Suzuki, Takao

2005-01-01

The recording performance of double-layered granular-type FePt-MgO perpendicular magnetic recording media fabricated onto glass discs by sputtering is investigated. The (0 0 1)-textured FePt granular films are obtained by annealing FePt/MgO multilayers. Three different multilayer structures are compared in their magnetic properties and recording SNR performances. To evaluate thermal stability property of these granular-type FePt disks, the time-dependent magnetic force microscope (MFM) signal from the written bits on one of these disks is recorded in the temperature range 25-200 degree sign C. The signal decay at high observation temperature is interpreted based on the temperature dependence of magnetic anisotropy (K u )

Reclaim/recycle of Pt/C catalysts for PEMFC

International Nuclear Information System (INIS)

Zhao, Jishi; He, Xiangming; Tian, Jianhua; Wan, Chunrong; Jiang, Changyin

2007-01-01

Platinum was reclaimed from Pt/C catalysts of the PEMFC by drying the degraded Pt/C catalysts at 80 o C for 3 h, followed by sintering at 600 o C for 6 h, dissolution by aqua fortis, purification with hydrochloric acid, reduction and filtration, successively. Pt/C catalysts were prepared again from the reclaimed Pt by two proposed processes, e.g., pH value control process and mass control process. The fuel cell with recycled catalysts presented a power density of over 0.18 W cm -2 . The reclaiming of Pt/C catalysts is a potential way for recycling Pt for PEMFC, reducing the cost of PEMFC

ANALISIS PENENTUAN HARGA POKOK PRODUKSI DENGAN MENGGUNAKAN METODE TIME DRIVEN ACTIVITY BASED COSTING (TDABC PADA PT IIB

Directory of Open Access Journals (Sweden)

Arfan Bakhtiar

2017-01-01

  PT IIB is a manufacturing companywith major product Carton box packaging and Pulp Tray and Pallet as side products. This products using materials cardboard, scrap paper and wood. Company using calculations with adding material costs, employees’ salary costs in each activity and% profit. The bigsize product need large space, demanding supply system of Just In Time (JIT, is timely in production only to order, if there is an additional need to do overtime. So it takes time calculation standard that can be estimated lead time. So, need a method to determine an accurate cost to unify the cost of each activity, support costs and standard time. The method used is the Time-Driven Activity Based Costing (TDABC. TDABC is a method of formulating the charges on the basis of time, all of the resources used in the production are converted into units of time. The results of this research to acquire all of the costs related to production processes and support costs, gain time standard that is necessary to make three types of products and obtain a calculation of the cost of production for Box RSC Rp 4.006,-, Box DC Rp 4.449,-, Pulp Tray Rp 350,- and Pallet Kayu Rp 155.902,-,and obtain comparative results of the calculation TDABC method and company.

Monometallic Pd and Pt and Bimetallic Pd-Pt/Al2O3-TiO2 for the HDS of DBT: Effect of the Pd and Pt Incorporation Method

Directory of Open Access Journals (Sweden)

Reynaldo Martínez Guerrero

2014-01-01

Full Text Available The effect of the preparation method of monometallic Pd and Pt and bimetallic Pd-Pt/Al2O3-TiO2 catalysts on the hydrodesulfurization (HDS of dibenzothiophene (DBT was investigated in this study. The synthesis was accomplished using three methods: (A impregnation, (B metal organic chemical vapor deposition (MOCVD, and (C impregnation-MOCVD. The bimetallic Pd-Pt catalyst prepared by the impregnation-MOCVD method was most active for the HDS of DBT compared to those prepared by the single impregnation or MOCVD method due to the synergetic effect between both noble metals. The greater selectivity toward biphenyl indicated that this bimetallic Pd-Pt catalyst preferentially removes sulfur via the direct desulfurization mechanism. However, the bimetallic Pd-Pt catalyst prepared using the single MOCVD method did not produce any cyclohexylbenzene, which is most likely associated with the hydrogenation/dehydrogenation sites.

Synthesis and electrocatalytic activity of Au/Pt bimetallic nanodendrites for ethanol oxidation in alkaline medium.

Science.gov (United States)

Han, Xinyi; Wang, Dawei; Liu, Dong; Huang, Jianshe; You, Tianyan

2012-02-01

Gold/Platinum (Au/Pt) bimetallic nanodendrites were successfully synthesized through seeded growth method using preformed Au nanodendrites as seeds and ascorbic acid as reductant. Cyclic voltammograms (CVs) of a series of Au/Pt nanodendrites modified electrodes in 1M KOH solution containing 1M ethanol showed that the electrocatalyst with a molar ratio (Au:Pt) of 3 exhibited the highest peak current density and the lowest onset potential. The peak current density of ethanol electro-oxidation on the Au(3)Pt(1) nanodendrites modified glassy carbon electrode (Au(3)Pt(1) electrode) is about 16, 12.5, and 4.5 times higher than those on the polycrystalline Pt electrode, polycrystalline Au electrode, and Au nanodendrites modified glassy carbon electrode (Au dendrites electrode), respectively. The oxidation peak potential of ethanol electro-oxidation on the Au(3)Pt(1) electrode is about 299 and 276 mV lower than those on the polycrystalline Au electrode and Au dendrites electrode, respectively. These results demonstrated that the Au/Pt bimetallic nanodendrites may find potential application in alkaline direct ethanol fuel cells (ADEFCs). Copyright © 2011 Elsevier Inc. All rights reserved.

PtRu nanoparticles embedded in nitrogen doped carbon with highly stable CO tolerance and durability

Science.gov (United States)

Ling, Ying; Yang, Zehui; Yang, Jun; Zhang, Yunfeng; Zhang, Quan; Yu, Xinxin; Cai, Weiwei

2018-02-01

As is well known, the lower durability and sluggish methanol oxidation reaction (MOR) of PtRu alloy electrocatalyst blocks the commercialization of direct methanol fuel cells (DMFCs). Here, we design a new PtRu electrocatalyst, with highly stable CO tolerance and durability, in which the PtRu nanoparticles are embedded in nitrogen doped carbon layers derived from carbonization of poly(vinyl pyrrolidone). The newly fabricated electrocatalyst exhibits no loss in electrochemical surface area (ECSA) and MOR activity after potential cycling from 0.6-1.0 V versus reversible hydrogen electrode, while commercial CB/PtRu retains only 50% of its initial ECSA. Meanwhile, due to the same protective layers, the Ru dissolution is decelerated, resulting in stable CO tolerance. Methanol oxidation reaction (MOR) testing indicates that the activity of newly fabricated electrocatalyst is two times higher than that of commercial CB/PtRu, and the fuel cell performance of the embedded PtRu electrocatalyst was comparable to that of commercial CB/PtRu. The embedded PtRu electrocatalyst is applicable in real DMFC operation. This study offers important and useful information for the design and fabrication of durable and CO tolerant electrocatalysts.

Inflammation-induced haemostatic response in layer chickens infected with Streptococcus equi subsp. zooepidemicus as evaluated by fibrinogen, prothrombin time and thromboelastography

DEFF Research Database (Denmark)

Roy, Krisna; Bertelsen, Mads Frost; Pors, Susanne Elisabeth

2014-01-01

p.i. (9.4 ± 1.4 g/l) and day 6 p.i. (8.0 ± 0.7 g/l) and the PT was prolonged at day 6 p.i. (168.1 ± 21.0 sec) compared with the day 0 standards (2.6 ± 0.2 g/l and 104.6 ± 2.0 sec, respectively) (P ... mean values of the clot formation rate (α-angle) and maximal amplitude (MA) of TEG tracing at day 3 p.i. (83.1 ± 0.7°, 83.8 ± 1.4 mm) and day 6 p.i. (84.0 ± 0.4°, 89.8 ± 1.0 mm) compared with the day 0 values (75.8 ± 2.2° and 66.9 ± 1.4 mm, respectively) (P ... (1.5 ± 0.1 g/l), PT (79.4 ± 6.4 sec), TEG-α (76.7 ± 1.5°) and TEG-MA (64.0 ± 2.3 mm) were lower at day 6 compared with values observed for the infected chickens (P

FROM PETISTA WAY TO BRAZILIAN WAY: HOW THE PT CHANGES IN THE ROAD

Directory of Open Access Journals (Sweden)

Brian Wampler

2008-12-01

Full Text Available When Luiz Inácio ‘Lula’ da Silva won Brazil’s presidency in 2002, he and his Workers’ Party (PT had most observers convinced that this was a watershed moment for the country’s democracy. After all, the PT had built a reputation for over twenty years for good government and ethics in politics. Yet Lula’s government has been severely undermined by corruption scandals, which surprised the most cynical PT-watchers and fostered broad disillusionment among many long-time PT supporters. This article lays out four interweaving strands of explanation for the PT’s fall from grace, involving: the high cost ofBrazilian elections, the strategic decisions of the party’s dominant faction, economic constraints on an eventual Lula administration, and the difficulties of multi-party presidential systems.

The controlled formation and cleavage of an intramolecular d8-d8 Pt-Pt interaction in a dinuclear cycloplatinated molecular "pivot-hinge".

Science.gov (United States)

Koo, Chi-Kin; Wong, Ka-Leung; Lau, Kai-Cheung; Wong, Wai-Yeung; Lam, Michael Hon-Wah

2009-08-03

The bis(diphenylphosphino)methane (dppm)-bridged dinuclear cycloplatinated complex {[Pt(L)](2)(mu-dppm)}(2+) (Pt(2)dppm; HL: 2-phenyl-6-(1H-pyrazol-3-yl)-pyridine) demonstrates interesting reversible "pivot-hinge"-like intramolecular motions in response to the protonation/deprotonation of L. In its protonated "closed" configuration, the two platinum(II) centers are held in position by intramolecular d(8)-d(8) Pt-Pt interaction. In its deprotonated "open" configuration, such Pt-Pt interaction is cleaved. To further understand the mechanism behind this hingelike motion, an analogous dinuclear cycloplatinated complex, {[Pt(L)](2)(mu-dchpm)}(2+) (Pt(2)dchpm) with bis(dicyclohexylphosphino)methane (dchpm) as the bridging ligand, was synthesized. From its protonation/deprotonation responses, it was revealed that aromatic pi-pi interactions between the phenyl moieties of the mu-dppm and the deprotonated pyrazolyl rings of L was essential to the reversible cleavage of the intramolecular Pt-Pt interaction in Pt(2)dppm. In the case of Pt(2)dchpm, spectroscopic and spectrofluorometric titrations as well as X-ray crystallography indicated that the distance between the two platinum(II) centers shrank upon deprotonation, thus causing a redshift in its room-temperature triplet metal-metal-to-ligand charge-transfer emission from 614 to 625 nm. Ab initio calculations revealed the presence of intramolecular hydrogen bonding between the deprotonated and negatively charged 1-pyrazolyl-N moiety and the methylene CH and phenyl C-H of the mu-dppm. The "open" configuration of the deprotonated Pt(2)dppm was estimated to be 19 kcal mol(-1) more stable than its alternative "closed" configuration. On the other hand, the open configuration of the deprotonated Pt(2)dchpm was 6 kcal mol(-1) less stable than its alternative closed configuration.

First-principles study of nitric oxide oxidation on Pt(111) versus Pt overlayer on 3d transition metals