WorldWideScience

Sample records for propil om1 om2

  1. Pyrolytic Behaviour of the Commercial Terphenyl Mixtures. Propil OM1, OM2 and OMP

    International Nuclear Information System (INIS)

    Barrera Pinero, R.; Manero Rodriguez, J.

    1963-01-01

    Statistic tests on the thermal stability of the three above mentioned materials and pure para-terphenyl, at temperatures ranging 400-470 degree centigrade, are described. Several conclusions are attained with respect to the kinetics of the pyrolysis decomposition, which was controlled according to the following steps: a) Gas evolution (hydrogen and hydrocarbons). B) Intermediate boiling compound formation, such as biphenyl, benzene.alkyl-benzenes, etc. c) high boiling compound evolution. d) Decreasing of starting material. In this way, comparative data en decomposition rate and activation energy of the pyrolysis phenomena are tabulated. (Author) 15 refs

  2. Pyrolytic Behaviour of the Commercial Terphenyl Mixtures. Propil OM1, OM2 and OMP; Comportamiento pirolitico de las mezclas terfenilicas comerciales. Progil OM1, OM2 y OMP

    Energy Technology Data Exchange (ETDEWEB)

    Barrera Pinero, R; Manero Rodriguez, J

    1963-07-01

    Statistic tests on the thermal stability of the three above mentioned materials and pure para-terphenyl, at temperatures ranging 400-470 degree centigrade, are described. Several conclusions are attained with respect to the kinetics of the pyrolysis decomposition, which was controlled according to the following steps: a) Gas evolution (hydrogen and hydrocarbons). B) Intermediate boiling compound formation, such as biphenyl, benzene.alkyl-benzenes, etc. c) high boiling compound evolution. d) Decreasing of starting material. In this way, comparative data en decomposition rate and activation energy of the pyrolysis phenomena are tabulated. (Author) 15 refs.

  3. Selective hydrogenation of halogenated arenes using porous manganese oxide (OMS-2) and platinum supported OMS-2 catalysts.

    Science.gov (United States)

    McManus, Iain J; Daly, Helen; Manyar, Haresh G; Taylor, S F Rebecca; Thompson, Jillian M; Hardacre, Christopher

    2016-07-04

    Porous manganese oxide (OMS-2) and platinum supported on OMS-2 catalysts have been shown to facilitate the hydrogenation of the nitro group in chloronitrobenzene to give chloroaniline with no dehalogenation. Complete conversion was obtained within 2 h at 25 °C and, although the rate of reaction increased with increasing temperature up to 100 °C, the selectivity to chloroaniline remained at 99.0%. Use of Pd/OMS-2 or Pt/Al2O3 resulted in significant dechlorination even at 25 °C and 2 bar hydrogen pressure giving a selectivity to chloroaniline of 34.5% and 77.8%, respectively, at complete conversion. This demonstrates the potential of using platinum group metal free catalysts for the selective hydrogenation of halogenated aromatics. Two pathways were observed for the analogous nitrobenzene hydrogenation depending on the catalyst used. The hydrogenation of nitrobenzene was found to follow a direct pathway to aniline and nitrosobenzene over Pd/OMS-2 in contrast to the OMS and Pt/OMS-2 catalysts which resulted in formation of nitrosobenzene, azoxybenzene and azobenzene/hydrazobenzene intermediates before complete conversion to aniline. These results indicate that for Pt/OMS-2 the hydrogenation proceeds predominantly over the support with the metal acting to dissociate hydrogen. In the case of Pd/OMS-2 both the hydrogenation and hydrogen adsorption occur on the metal sites.

  4. Graphitic carbon nitride induced activity enhancement of OMS-2 catalyst for pollutants degradation with peroxymonosulfate

    Science.gov (United States)

    Li, Jun; Fang, Jia; Gao, Long; Zhang, Jingwen; Ruan, Xinchao; Xu, Aihua; Li, Xiaoxia

    2017-04-01

    Low valent manganese species and surface oxygen vacancies in OMS-2 play an important role in catalytic reactions, and it is highly desirable and challenging to develop a feasible strategy of increasing the Mn(II) and Mn(III) species concentration in the oxide. Herein, the OMS-2/g-C3N4 hybrids (OMS-2/CN) were prepared by a facile refluxing approach. It was found that the MnOx precursor from the reaction of KMnO4 and MnSO4 was transformed into OMS-2 nanofibers with the formation of more Mn(II) and Mn(III) species in OMS-2 and the destruction and oxidation of g-C3N4. The hybrids exhibited higher efficiency for pollutants degradation in the presence of PMS than the pure OMS-2 or g-C3N4. There was a linear correlation between the specific initial rate and the ratio of Mn(II + III)/Mn(IV). Mechanism investigation indicated that high active manganese species or caged radicals were produced through the oxidation of Mn(II) and Mn(III) by PMS and contributed to the degradation reaction. During five consecutive cycles, the catalyst exhibited good reusability and stability. Therefore, the OMS-2/CN hybrids are promising catalysts for wastewater treatment with PMS as the oxidant.

  5. Hydrothermal Synthesis and Electrochemical Performance of Manganese Oxide (Na-OMS-2) Nanorods.

    Science.gov (United States)

    Zhang, Qing; Xu, Shan; Zheng, Hao; Luo, Zhaohui; Liu, Kang; Wang, Wei; Li, Guohua; Wang, Shiquan; Liu, Jianwen; Feng, Chuanqi

    2017-02-01

    Sodium octahedral molecular sieve nanorods (Na-OMS-2) were prepared through a facile hydrothermal method. The effects of reaction temperature and duration on particle sizes of the products were investigated. The electrochemical performance of samples was studied by constant current charge–discharge tests as cathode material for Li-ion batteries (LIBs). The initial discharge capacity of Na-OMS-2 is 123.4 mAh g−1 and the capacity retention was 123.9 mAh g−1 after 100 cycles. The result demonstrates that Na-OMS-2 cathode material behaves a good cycling stability.

  6. The effect of Ce ion substituted OMS-2 nanostructure in catalytic activity for benzene oxidation

    Science.gov (United States)

    Hou, Jingtao; Li, Yuanzhi; Mao, Mingyang; Zhao, Xiujian; Yue, Yuanzheng

    2014-11-01

    The nanostructure of Ce doped OMS-2 plays a very important role in its catalytic property. We demonstrate by density functional theory (DFT) calculations that the unique nanostructure of the Ce ion substituted OMS-2 with Mn vacancy in the framework is beneficial for the improvement of catalytic activity, while the nanostructure of the Ce ion substituted OMS-2 without defects are detrimental to the catalytic activity. We establish a novel and facile strategy of synthesizing these unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework by hydrothermal redox reaction between Ce(NO3)3 and KMnO4 with KMnO4/Ce(NO3)3 at a molar ratio of 3 : 1 at 120 °C. Compared to pure OMS-2, the produced catalyst of Ce ion substituted OMS-2 ultrathin nanorods exhibits an enormous enhancement in the catalytic activity for benzene oxidation, which is evidenced by a significant decrease (ΔT50 = 100 °C, ΔT90 = 129 °C) in the reaction temperature of T50 and T90 (corresponding to the benzene conversion = 50% and 90%), which is considerably more efficient than the expensive supported noble metal catalyst (Pt/Al2O3). We combine both theoretical and experimental evidence to provide a new physical insight into the significant effect due to the defects induced by the Ce ion substitution on the catalytic activity of OMS-2. The formation of unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework leads to a significant enhancement of the lattice oxygen activity, thus tremendously increasing the catalytic activity.The nanostructure of Ce doped OMS-2 plays a very important role in its catalytic property. We demonstrate by density functional theory (DFT) calculations that the unique nanostructure of the Ce ion substituted OMS-2 with Mn vacancy in the framework is beneficial for the improvement of catalytic activity, while the nanostructure of the Ce ion substituted OMS-2 without defects are detrimental to the catalytic activity. We establish a novel

  7. Synthesis of Cation and Water Free Cryptomelane Type OMS-2 Cathode Materials: The Impact of Tunnel Water on Electrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Poyraz, Altug S.; Huang, Jianping; Zhang, Bingjie; Marschilok, Amy C.; Takeuchi, Kenneth J.; Takeuchi, Esther S.

    2017-01-01

    Cryptomelane type manganese dioxides (α-MnO2, OMS-2) are interesting potential cathode materials due to the ability of their one dimensional (1D) tunnels to reversibly host various cations including Li+and an accessible stable 3+/4+ redox couple. Here, we synthesized metal cation free OMS-2 materials where the tunnels were occupied by only water and hydronium ions. Water was subsequently removed from the tunnels. Cation free OMS-2 and Dry-OMS-2 were used as cathodes in Li based batteries to investigate the role of tunnel water on their electrochemistry. The initial discharge capacity was higher for Dry-OMS-2 (252 mAh/g) compared to OMS-2 (194 mAh/g), however, after 100 cycles Dry-OMS-2 and OMS-2 delivered 137 mAh/g and 134 mAh/g, respectively. Li+ion diffusion was more facile for Dry-OMS as evidenced by rate capability, at 400 mA/g. Dry-OMS-2 delivered 135mAh/g whereas OMS-2 delivered ~115 mAh/g. This first report of the impact of tunnel water on the electrochemistry of OMS-2 type materials demonstrates that the presence of tunnel water in OMS-2 type materials negatively impacts the electrochemistry.

  8. Remarkable promotion effect of trace sulfation on OMS-2 nanorod catalysts for the catalytic combustion of ethanol.

    Science.gov (United States)

    Zhang, Jie; Zhang, Changbin; He, Hong

    2015-09-01

    OMS-2 nanorod catalysts were synthesized by a hydrothermal redox reaction method using MnSO4 (OMS-2-SO4) and Mn(CH3COO)2 (OMS-2-AC) as precursors. SO4(2-)-doped OMS-2-AC catalysts with different SO4(2-) concentrations were prepared next by adding (NH4)2SO4 solution into OMS-2-AC samples to investigate the effect of the anion SO4(2-) on the OMS-2-AC catalyst. All catalysts were then tested for the catalytic oxidation of ethanol. The OMS-2-SO4 catalyst synthesized demonstrated much better activity than OMS-2-AC. The SO4(2-) doping greatly influenced the activity of the OMS-2-AC catalyst, with a dramatic promotion of activity for suitable concentration of SO4(2-) (SO4/catalyst=0.5% W/W). The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), NH3-TPD and H2-TPR techniques. The results showed that the presence of a suitable amount of SO4(2-) species in the OMS-2-AC catalyst could decrease the Mn-O bond strength and also enhance the lattice oxygen and acid site concentrations, which then effectively promoted the catalytic activity of OMS-2-AC toward ethanol oxidation. Thus it was confirmed that the better catalytic performance of OMS-2-SO4 compared to OMS-2-AC is due to the presence of some residual SO4(2-) species in OMS-2-SO4 samples. Copyright © 2015. Published by Elsevier B.V.

  9. Enhanced oxidation of arsenite to arsenate using tunable K+ concentration in the OMS-2 tunnel.

    Science.gov (United States)

    Hou, Jingtao; Sha, Zhenjie; Hartley, William; Tan, Wenfeng; Wang, Mingxia; Xiong, Juan; Li, Yuanzhi; Ke, Yujie; Long, Yi; Xue, Shengguo

    2018-03-29

    Cryptomelane-type octahedral molecular sieve manganese oxide (OMS-2) possesses high redox potential and has attracted much interest in its application for oxidation arsenite (As(III)) species of arsenic to arsenate (As(V)) to decrease arsenic toxicity and promote total arsenic removal. However, coexisting ions such as As(V) and phosphate are ubiquitous and readily bond to manganese oxide surface, consequently passivating surface active sites of manganese oxide and reducing As(III) oxidation. In this study, we present a novel strategy to significantly promote As(III) oxidation activity of OMS-2 by tuning K + concentration in the tunnel. Batch experimental results reveal that increasing K + concentration in the tunnel of OMS-2 not only considerably improved As(III) oxidation kinetics rate from 0.027 to 0.102 min -1 , but also reduced adverse effect of competitive ion on As(III) oxidation. The origin of K + concentration effect on As(III) oxidation was investigated through As(V) and phosphate adsorption kinetics, detection of Mn 2+ release in solution, surface charge characteristics, and density functional theory (DFT) calculations. Experimental results and theoretical calculations confirm that by increasing K + concentration in the OMS-2 tunnel not only does it improve arsenic adsorption on K + doped OMS-2, but also accelerates two electrons transfers from As(III) to each bonded Mn atom on OMS-2 surface, thus considerably improving As(III) oxidation kinetics rate, which is responsible for counteracting the adverse adsorption effects by coexisting ions. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. Solid-phase photocatalytic degradation of polyethylene film with manganese oxide OMS-2

    Science.gov (United States)

    Liu, Guanglong; Liao, Shuijiao; Zhu, Duanwei; Cui, Jingzhen; Zhou, Wenbing

    2011-01-01

    Solid-phase photocatalytic degradation of polyethylene (PE) film with cryptomelane-type manganese oxide (OMS-2) as photocatalyst was investigated in the ambient air under ultraviolet and visible light irradiation. The properties of the composite films were compared with those of the pure PE film through performing weight loss monitoring, IR spectroscopy, scanning electron microscopic (SEM) and X-ray photoelectron spectroscopy (XPS). The photoinduced degradation of PE-OMS-2 composite films was higher than that of the pure films, while there has been little change under the visible light irradiation. The weight loss of PE-OMS-2 (1.0 wt%) composite films steadily decreased and reached 16.5% in 288 h under UV light irradiation. Through SEM observation there were some cavities on the surface of composite films, but few change except some surface chalking phenomenon occurred in pure PE film. The degradation rate with ultraviolet irradiation is controllable by adjusting the content of OMS-2 particles in PE plastic. Finally, the mechanism of photocatalytic degradation of the composite films was briefly discussed.

  11. Gold nanoparticles on OMS-2 for heterogeneously catalyzed aerobic oxidative α,β-dehydrogenation of β-heteroatom-substituted ketones.

    Science.gov (United States)

    Yoshii, Daichi; Jin, Xiongjie; Yatabe, Takafumi; Hasegawa, Jun-Ya; Yamaguchi, Kazuya; Mizuno, Noritaka

    2016-12-06

    In the presence of Au nanoparticles supported on manganese oxide OMS-2 (Au/OMS-2), various kinds of β-heteroatom-substituted α,β-unsaturated ketones (heteroatom = N, O, S) can be synthesized through α,β-dehydrogenation of the corresponding saturated ketones using O 2 (in air) as the oxidant. The catalysis of Au/OMS-2 is truly heterogeneous, and the catalyst can be reused.

  12. Effects of precursor and sulfation on OMS-2 catalyst for oxidation of ethanol and acetaldehyde at low temperatures.

    Science.gov (United States)

    Wang, Renhu; Li, Junhua

    2010-06-01

    Volatile organic compounds (VOCs) emitted from many industrial processes and transportation activities are major organic pollutants in the atmosphere and toxic to human health. Octahedral molecular sieve (OMS-2) catalysts with different precursors and sulfate-acidified OMS-2 catalysts were synthesized using refluxing methods. The catalysts were investigated on complete oxidation of ethanol and acetaldehyde, and both demonstrated good reactivity. However, acidification resulted in a decrease in activity. OMS-2 catalyst using MnSO(4) as precursor exhibited the best catalytic performance and, thus, was selected for catalyst deactivation by sulfur dioxide. The results of this study suggested that the Mn-O bond of OMS-2 catalysts was the main determinant of the catalytic activity toward oxygenated VOC oxidation and weaker acid sites benefited higher acetaldehyde selectivity. Catalyst deactivation resulted from a strong but slow chemical interaction between the Mn-O bond and sulfur dioxide, probably forming manganese sulfate.

  13. Enhanced Photocatalytic Degradation of Methyl Orange Dye under the Daylight Irradiation over CN-TiO₂ Modified with OMS-2.

    Science.gov (United States)

    Hassan, Mohamed Elfatih; Chen, Jing; Liu, Guanglong; Zhu, Duanwei; Cai, Jianbo

    2014-12-12

    In this study, CN-TiO₂ was modified with cryptomelane octahedral molecular sieves (OMS-2) by the sol-gel method based on the self-assembly technique to enhance its photocatalytic activity under the daylight irradiation. The synthesized samples were characterized by X-ray diffraction (XRD), UV-vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR) and porosimeter analysis. The results showed that the addition of OMS-2 in the sol lead to higher Brunauer-Emmett-Teller (BET) surface area, pore volume, porosity of particle after heat treatment and the specific surface area, porosity, crystallite size and pore size distribution could be controlled by adjusting the calcination temperature. Compared to the CN-TiO₂-400 sample, CN-TiO₂/OMS-2-400 exhibited greater red shift in absorption edge of samples in visible region due to the OMS-2 coated. The enhancement of photocatalytic activity of CN-TiO₂/OMS-2 composite photocatalyst was subsequently evaluated for the degradation of the methyl orange dye under the daylight irradiation in water. The results showed that the methyl orange dye degradation rate reach to 37.8% for the CN-TiO₂/OMS-2-400 sample under the daylight irradiation for 5 h, which was higher than that of reference sample. The enhancement in daylight photocatalytic activities of the CN-TiO₂/OMS samples could be attributed to the synergistic effects of OMS-2 coated, larger surface area and red shift in adsorption edge of the prepared sample.

  14. Application of magnetic OMS-2 in sequencing batch reactor for treating dye wastewater as a modulator of microbial community.

    Science.gov (United States)

    Pan, Fei; Yu, Yang; Xu, Aihua; Xia, Dongsheng; Sun, Youmin; Cai, Zhengqing; Liu, Wen; Fu, Jie

    2017-10-15

    The potential and mechanism of synthesized magnetic octahedral molecular sieve (Fe 3 O 4 @OMS-2) nanoparticles in enhancing the aerobic microbial ability of sequencing batch reactor (SBR) for treating dye wastewater have been revealed in this study. The addition of Fe 3 O 4 @OMS-2 of 0.25g/L enhanced the decolorization of SBRs with an operation cycle of 24h by more than 20%. The 16S rRNA gene high-throughput sequencing indicated Fe 3 O 4 @OMS-2 increased the microbial richness and diversity of SBRs, and more importantly, promoted the potential dye-degrading bacteria. After a series of enriching and screening, four bacterial strains with the considerable decolorizing ability were isolated from SBRs, designating Alcaligenes faecalis FP-G1, Bacillus aryabhattai FP-F1, Escherichia fergusonii FP-D1 and Rhodococcus ruber FP-E1, respectively. The growth and decolorization of these pure strains were promoted in the presence of Fe 3 O 4 @OMS-2, which agrees with the result of high-throughput sequencing. Monitoring dissolved Fe/Mn ions and investigating the change of oxidation states of Fe/Mn species discovered OMS-2 composition played the critical role in modulating the microbial community. The significant enhancement of Mn-oxidizing/-reducing bacteria suggested microbial Mn redox may be the key action mechanism of Fe 3 O 4 @OMS-2, which can provide numerous benefits for the microbial community and decolorization of SBRs. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Full Solar Spectrum Light Driven Thermocatalysis with Extremely High Efficiency on Nanostructured Ce Ion Substituted OMS-2 Catalyst for VOCs Purification

    DEFF Research Database (Denmark)

    Hou, J.T.; Li, Y.Z.; Mao, M.Y.

    2015-01-01

    solar spectrum, visible-infrared, and infrared light, the Ce ion substituted OMS-2 catalyst exhibits extremely high catalytic activity and excellent durability for the oxidation of volatile organic pollutants such as benzene, toluene, and acetone. Based on the experimental evidence, we propose a novel...... in a considerable increase of temperature. By combining the efficient photothermal conversion and thermocatalytic activity of the Ce ion substituted OMS-2 catalyst, we carried out full solar spectrum, visible-infrared, and infrared light driven catalysis with extremely high efficiency. Under the irradiation of full...... mechanism of solar light driven thermocatalysis for the Ce ion substituted OMS-2 catalyst. The reason why the Ce ion substituted OMS-2 catalyst exhibits much higher catalytic activity than pure OMS-2 and CeO2/OMS-2 nano composite under the full solar spectrum irradiation is discussed....

  16. OMS-2-Supported Cu Hydroxide-Catalyzed Benzoxazoles Synthesis from Catechols and Amines via Domino Oxidation Process at Room Temperature.

    Science.gov (United States)

    Meng, Xu; Wang, Yanmin; Wang, Yuanguang; Chen, Baohua; Jing, Zhenqiang; Chen, Gexin; Zhao, Peiqing

    2017-07-07

    In the presence of manganese oxide octahedral molecular sieve (OMS-2) supported copper hydroxide Cu(OH) x /OMS-2, aerobic synthesis of benzoxazoles from catechols and amines via domino oxidation/cyclization at room temperature is achieved. This heterogeneous benzoxazoles synthesis initiated by the efficient oxidation of catechols over Cu(OH) x /OMS-2 tolerates a variety of substrates, especially amines containing sensitive groups (hydroxyl, cyano, amino, vinyl, ethynyl, ester, and even acetyl groups) and heterocycles, which affords functionalized benzoxazoles in good to excellent yields by employing low catalyst loading (2 mol % Cu). The characterization and plausible catalytic mechanism of Cu(OH) x /OMS-2 are described. The notable features of our catalytic protocol such as the use of air as the benign oxidant and EtOH as the solvent, mild conditions, ease of product separation, being scalable up to the gram level, and superior reusability of catalyst (up to 10 cycles) make it more practical and environmentally friendly for organic synthesis.

  17. Full solar spectrum light driven thermocatalysis with extremely high efficiency on nanostructured Ce ion substituted OMS-2 catalyst for VOCs purification

    Science.gov (United States)

    Hou, Jingtao; Li, Yuanzhi; Mao, Mingyang; Yue, Yuanzheng; Greaves, G. Neville; Zhao, Xiujian

    2015-01-01

    The nanostructured Ce ion substituted cryptomelane-type octahedral molecular sieve (OMS-2) catalyst exhibits strong absorption in the entire solar spectrum region. The Ce ion substituted OMS-2 catalyst can efficiently transform the absorbed solar energy to thermal energy, resulting in a considerable increase of temperature. By combining the efficient photothermal conversion and thermocatalytic activity of the Ce ion substituted OMS-2 catalyst, we carried out full solar spectrum, visible-infrared, and infrared light driven catalysis with extremely high efficiency. Under the irradiation of full solar spectrum, visible-infrared, and infrared light, the Ce ion substituted OMS-2 catalyst exhibits extremely high catalytic activity and excellent durability for the oxidation of volatile organic pollutants such as benzene, toluene, and acetone. Based on the experimental evidence, we propose a novel mechanism of solar light driven thermocatalysis for the Ce ion substituted OMS-2 catalyst. The reason why the Ce ion substituted OMS-2 catalyst exhibits much higher catalytic activity than pure OMS-2 and CeO2/OMS-2 nano composite under the full solar spectrum irradiation is discussed.The nanostructured Ce ion substituted cryptomelane-type octahedral molecular sieve (OMS-2) catalyst exhibits strong absorption in the entire solar spectrum region. The Ce ion substituted OMS-2 catalyst can efficiently transform the absorbed solar energy to thermal energy, resulting in a considerable increase of temperature. By combining the efficient photothermal conversion and thermocatalytic activity of the Ce ion substituted OMS-2 catalyst, we carried out full solar spectrum, visible-infrared, and infrared light driven catalysis with extremely high efficiency. Under the irradiation of full solar spectrum, visible-infrared, and infrared light, the Ce ion substituted OMS-2 catalyst exhibits extremely high catalytic activity and excellent durability for the oxidation of volatile organic pollutants

  18. Effect of preparation method on the surface characteristics and activity of the Pd/OMS-2 catalysts for the oxidation of carbon monoxide, toluene, and ethyl acetate

    Science.gov (United States)

    Liu, Lisha; Song, Yong; Fu, Zhidan; Ye, Qing; Cheng, Shuiyuan; Kang, Tianfang; Dai, Hongxing

    2017-02-01

    The cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2)-supported Pd (0.5 wt% Pd/OMS-2-DP, 0.5 wt% Pd/OMS-2-PI, and 0.5 wt% Pd/OMS-2-EX) catalysts were prepared by the deposition-precipitation, pre-incorporation, and ion-exchanging strategies, respectively. It is shown that the preparation method exerted an important effect on the physicochemical property of the sample. Among the OMS-2-supported Pd catalysts, 0.5 wt% Pd/OMS-2-DP possessed the highest surface (Mn2+ + Mn3+)/Mn4+ atomic ratio and the highest surface Pd loading and acid sites. The 0.5 wt% Pd/OMS-2 catalysts outperformed the Pd-free counterpart, among which 0.5 wt% Pd/OMS-2-DP presented the best catalytic activity (T50% and T90% were 25 and 55 °C for CO oxidation, 240 and 285 °C for toluene oxidation, and 160 and 200 °C for ethyl acetate oxidation, respectively). We believe that the high Pd surface loading, high surface atomic ratio of (Mn2+ + Mn3+)/Mn4+, and good low-temperature reducibility, good oxygen mobility, and high acidity were responsible for the excellent performance of the 0.5 wt% Pd/OMS-2-DP catalyst.

  19. Effect of preparation method on the surface characteristics and activity of the Pd/OMS-2 catalysts for the oxidation of carbon monoxide, toluene, and ethyl acetate

    International Nuclear Information System (INIS)

    Liu, Lisha; Song, Yong; Fu, Zhidan; Ye, Qing; Cheng, Shuiyuan; Kang, Tianfang; Dai, Hongxing

    2017-01-01

    Highlights: • The framework-structured of cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2) has a 2 × 2 square tunnel. • Preparation route has an important impact on physicochemical property of the product. • Pd/OMS-2-DP via the deposition-precipitation route shows excellent catalytic activity. • Pd surface loading, surface atomic ratio of Mn ions, lattice oxygen mobility, oxygen vacancy, reducibility and acidity govern activity. - Abstract: The cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2)-supported Pd (0.5 wt% Pd/OMS-2-DP, 0.5 wt% Pd/OMS-2-PI, and 0.5 wt% Pd/OMS-2-EX) catalysts were prepared by the deposition-precipitation, pre-incorporation, and ion-exchanging strategies, respectively. It is shown that the preparation method exerted an important effect on the physicochemical property of the sample. Among the OMS-2-supported Pd catalysts, 0.5 wt% Pd/OMS-2-DP possessed the highest surface (Mn 2+ + Mn 3+ )/Mn 4+ atomic ratio and the highest surface Pd loading and acid sites. The 0.5 wt% Pd/OMS-2 catalysts outperformed the Pd-free counterpart, among which 0.5 wt% Pd/OMS-2-DP presented the best catalytic activity (T 50% and T 90% were 25 and 55 °C for CO oxidation, 240 and 285 °C for toluene oxidation, and 160 and 200 °C for ethyl acetate oxidation, respectively). We believe that the high Pd surface loading, high surface atomic ratio of (Mn 2+ + Mn 3+ )/Mn 4+ , and good low-temperature reducibility, good oxygen mobility, and high acidity were responsible for the excellent performance of the 0.5 wt% Pd/OMS-2-DP catalyst.

  20. Effect of preparation method on the surface characteristics and activity of the Pd/OMS-2 catalysts for the oxidation of carbon monoxide, toluene, and ethyl acetate

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Lisha; Song, Yong; Fu, Zhidan [Key Laboratory of Beijing on Regional Air Pollution Control, Department of Environmental Science, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Ye, Qing, E-mail: yeqing@bjut.edu.cn [Key Laboratory of Beijing on Regional Air Pollution Control, Department of Environmental Science, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Cheng, Shuiyuan; Kang, Tianfang [Key Laboratory of Beijing on Regional Air Pollution Control, Department of Environmental Science, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Dai, Hongxing, E-mail: hxdai@bjut.edu.cn [Beijing Key Laboratory for Green Catalysis and Separation, Key Laboratory of Beijing on Regional Air Pollution Control, Department of Chemistry and Chemical Engineering, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China)

    2017-02-28

    Highlights: • The framework-structured of cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2) has a 2 × 2 square tunnel. • Preparation route has an important impact on physicochemical property of the product. • Pd/OMS-2-DP via the deposition-precipitation route shows excellent catalytic activity. • Pd surface loading, surface atomic ratio of Mn ions, lattice oxygen mobility, oxygen vacancy, reducibility and acidity govern activity. - Abstract: The cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2)-supported Pd (0.5 wt% Pd/OMS-2-DP, 0.5 wt% Pd/OMS-2-PI, and 0.5 wt% Pd/OMS-2-EX) catalysts were prepared by the deposition-precipitation, pre-incorporation, and ion-exchanging strategies, respectively. It is shown that the preparation method exerted an important effect on the physicochemical property of the sample. Among the OMS-2-supported Pd catalysts, 0.5 wt% Pd/OMS-2-DP possessed the highest surface (Mn{sup 2+} + Mn{sup 3+})/Mn{sup 4+} atomic ratio and the highest surface Pd loading and acid sites. The 0.5 wt% Pd/OMS-2 catalysts outperformed the Pd-free counterpart, among which 0.5 wt% Pd/OMS-2-DP presented the best catalytic activity (T{sub 50%} and T{sub 90%} were 25 and 55 °C for CO oxidation, 240 and 285 °C for toluene oxidation, and 160 and 200 °C for ethyl acetate oxidation, respectively). We believe that the high Pd surface loading, high surface atomic ratio of (Mn{sup 2+} + Mn{sup 3+})/Mn{sup 4+}, and good low-temperature reducibility, good oxygen mobility, and high acidity were responsible for the excellent performance of the 0.5 wt% Pd/OMS-2-DP catalyst.

  1. Thermal synthesis of oxide molecular sieve and Mn (K-OMS-2) from K-birnessite obtained from Sol-gel method

    International Nuclear Information System (INIS)

    Rezende, D.S.; Figueira, B.A.M.; Moraes, M.C. de; Silva, L.N. da; Mercury, J.M.R.; Figueiredo, G.P. de

    2016-01-01

    This study presents the thermal synthesis of molecular sieve with K-OMS2 structure from K-birnessite tunneling process, one Mn oxide with structure in layer. According X-Ray diffraction data it was possible to monitoring the conversion of the layered structure around 550 deg C for (K-OMS-2) tunnel with tetragonal system and I2/m space group. The FTIR main spectrum bands of K-OMS-2 was observed in 700, 525 e 470 cm-1 region and are related to elongation Mn 3+ -O e Mn 4+ -O in the tunnel structure. The product morphology identified by Scanning Electron Microscopy it was verified as pseudo tetragonal, reflecting externally the crystallographic system of cryptomelane structure. The results reveal one simple route for the Mn oxide molecular sieve with K-OMS-2 structure

  2. Novel synthesis of manganese and vanadium mixed oxide (V2O5/OMS-2) as an efficient and selective catalyst for the oxidation of alcohols in liquid phase

    International Nuclear Information System (INIS)

    Mahdavi, Vahid; Soleimani, Shima

    2014-01-01

    Graphical abstract: Oxidation of various alcohols is studied in the liquid phase over new composite mixed oxide (V 2 O 5 /OMS-2) catalyst using tert-butyl hydroperoxide (TBHP). The activity of V 2 O 5 /OMS-2 samples was considerably increased with respect to OMS-2 catalyst and these samples are found to be suitable for the selective oxidation of alcohols. - Highlights: • V 2 O 5 /K-OMS-2 with different V/Mn molar ratios prepared by the impregnation method. • Oxidation of alcohols was studied in the liquid phase over V 2 O 5 /K-OMS-2 catalyst. • V 2 O 5 /K-OMS-2 catalyst had excellent activity for alcohol oxidation. • Benzyl alcohol oxidation using excess TBHP followed a pseudo-first order kinetic. • The selected catalyst was reused without significant loss of activity. - Abstract: This work reports the synthesis and characterization of mixed oxide vanadium–manganese V 2 O 5 /K-OMS-2 at various V/Mn molar ratios and prepared by the impregnation method. Characterization of these new composite materials was made by elemental analysis, BET, XRD, FT-IR, SEM and TEM techniques. Results of these analyses showed that vanadium impregnated samples contained mixed phases of cryptomelane and crystalline V 2 O 5 species. Oxidation of various alcohols was studied in the liquid phase over the V 2 O 5 /K-OMS-2 catalyst using tert-butyl hydroperoxide (TBHP) and H 2 O 2 as the oxidant. Activity of the V 2 O 5 /K-OMS-2 samples was increased considerably with respect to K-OMS-2 catalyst due to the interaction of manganese oxide and V 2 O 5 . The kinetic of benzyl alcohol oxidation using excess TBHP over V 2 O 5 /K-OMS-2 catalyst was investigated at different temperatures and a pseudo-first order reaction was determined with respect to benzyl alcohol. The effects of reaction time, oxidant/alcohol molar ratio, reaction temperature, solvents, catalyst recycling potential and leaching were investigated

  3. Size-controlled synthesis and formation mechanism of manganese oxide OMS-2 nanowires under reflux conditions with KMnO4 and inorganic acids

    Science.gov (United States)

    Zhang, Qin; Cheng, Xiaodi; Qiu, Guohong; Liu, Fan; Feng, Xionghan

    2016-05-01

    This study presents a simplified approach for size-controlled synthesis of manganese oxide octahedral molecular sieve (OMS-2) nanowires using potassium permanganate (KMnO4) and different inorganic acids (HCl, HNO3, and H2SO4) under reflux conditions. The morphology and nanostructure of the synthesized products are characterized by X-ray diffraction, Ar adsorption, and electron microscopy analysis, in order to elucidate the controlling effects of acid concentration and type as well as the formation mechanism of OMS-2 nanowires. The concentration of inorganic acid is a crucial factor controlling the phase of the synthesized products. OMS-2 nanowires are obtained with HCl at the concentration ≥0.96 mol/L or with HNO3 and H2SO4 at the concentrations ≥0.72 mol/L. Differently, the type of inorganic acid effectively determines the particle size of OMS-2 nanowires. When the acid is changed from HCl to HNO3 and H2SO4 in the reflux system, the average length of OMS-2 declines significantly by 60-70% (1104-442 and 339 nm), with minor decreased in the average width (43-39 and 34 nm). The formation of OMS-2 nanowires under reflux conditions with KMnO4 and inorganic acids involves a two-step process, i.e., the initial formation of layered manganese oxides, and subsequent transformation to OMS-2 via a dissolution-recrystallization process under acidic conditions. The proposed reflux route provides an alternative approach for synthesizing OMS-2 nanowires as well as other porous nano-crystalline OMS materials.

  4. Ordered micro/macro porous K-OMS-2/SiO2 nanocatalysts: Facile synthesis, low cost and high catalytic activity for diesel soot combustion

    Science.gov (United States)

    Yu, Xuehua; Zhao, Zhen; Wei, Yuechang; Liu, Jian

    2017-04-01

    A series of novel oxide catalysts, which contain three-dimensionally ordered macroporous (3DOM) and microporous structure, were firstly designed and successfully synthesized by simple method. In the as-prepared catalysts, 3DOM SiO2 is used as support and microporous K-OMS-2 oxide nanoparticles are supported on the wall of SiO2. 3DOM K-OMS-2/SiO2 oxide catalysts were firstly used in soot particle oxidation reaction and they show very high catalytic activities. The high activities of K-OMS-2/SiO2 oxide catalysts can be assigned to three possible reasons: macroporous effect of 3DOM structure for improving contact between soot and catalyst, microporous effect of K-OMS-2 for adsorption of small gas molecules and interaction of K and Mn for activation of gas molecules. The catalytic activities of catalysts are comparable to or even higher than noble metal catalyst in the medium and high temperature range. For example, the T50 of K-OMS-2/SiO2-50, 328 °C, is much lower than those of Pt/Al2O3 and 3DOM Au/LaFeO3, 464 and 356 °C,respectively. Moreover, catalysts exhibited high catalytic stability. It is attributed to that the K+ ions are introduced into the microporous structure of OMS-2 and stabilized in the catalytic reaction. Meanwhile, the K+ ions play an important role in templating and stabilizing the tunneled framework of OMS-2.

  5. Coating magnetic CuFe2O4 nanoparticles with OMS-2 for enhanced degradation of organic pollutants via peroxymonosulfate activation

    Science.gov (United States)

    Ye, Peng; Wu, Deming; Wang, Manye; Wei, Yi; Xu, Aihua; Li, Xiaoxia

    2018-01-01

    A heterogeneous magnetic CuFe2O4@OMS-2 catalyst was fabricated through a facile solvent-free process using Mn(CH3COO)2 and KMnO4 in the presence of CuFe2O4. It was found that the BET surface area of OMS-2 as well as the ratio of low-valent manganese species significantly increased in the hybrid catalyst, due to interactions between CuFe2O4 and the precursor of amorphous manganese oxide. Acid Orange 7 (AO7) and other organic pollutants could be completely degraded by the CuFe2O4@OMS-2 catalyst within 30 min in the presence of peroxymonosulfate (PMS), while CuFe2O4 and OMS-2 showed no significant activity for the reaction. The hybrid catalyst also exhibited excellent long-term stability and could be easily recovered with the assistance of an external magnetic field. A possible degradation mechanism for the synergistic effects of different valent metal species and reactive radicals was proposed, which involved the electron transfer from Mn(III) or Mn(II) species to PMS with the generation of sulfate and hydroxyl radicals, and from AO7 and Cu(I) in CuFe2O4 to Mn(IV) and Mn(III) to reduce these Mn species.

  6. High-Energy-Density Aqueous Magnesium-Ion Battery Based on a Carbon-Coated FeVO4 Anode and a Mg-OMS-1 Cathode.

    Science.gov (United States)

    Zhang, Hongyu; Ye, Ke; Zhu, Kai; Cang, Ruibai; Yan, Jun; Cheng, Kui; Wang, Guiling; Cao, Dianxue

    2017-12-01

    Porous FeVO 4 is prepared by hydrothermal method and further modified by coating with carbon to obtain FeVO 4 /C with a hierarchical pore structure. FeVO 4 /C is used as an anodic electrode in aqueous rechargeable magnesium-ion batteries. The FeVO 4 /C material not only has improved electrical conductivity as a result of the carbon coating layer, but also has an increased specific surface area as a result of the hierarchical pore structure, which is beneficial for magnesium-ion insertion/deinsertion. Therefore, an aqueous rechargeable magnesium-ion full battery is successfully constructed with FeVO 4 /C as the anode, Mg-OMS-1 (OMS=octahedral molecular sieves) as the cathode, and 1.0 mol L -1 MgSO 4 as the electrolyte. The discharge capacity of the Mg-OMS-1//FeVO 4 /C aqueous battery is 58.9 mAh g -1 at a current density of 100 mA g -1 ; this value is obtained by calculating the total mass of two electrodes and the capacity retention rate of this device is 97.7 % after 100 cycles, with almost 100 % coulombic efficiency, which indicates that the system has a good electrochemical reversibility. Additionally, this system can achieve a high energy density of 70.4 Wh kg -1 , which provides powerful evidence that an aqueous magnesium-ion battery is possible. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Significant issues and changes for ANSI/ASME OM-1 1981, part 1, ASME OMc code-1994, and ASME OM Code-1995, Appendix I, inservice testing of pressure relief devices in light water reactor power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seniuk, P.J.

    1996-12-01

    This paper identifies significant changes to the ANSI/ASME OM-1 1981, Part 1, and ASME Omc Code-1994 and ASME OM Code-1995, Appendix I, {open_quotes}Inservice Testing of Pressure Relief Devices in Light-Water Reactor Power Plants{close_quotes}. The paper describes changes to different Code editions and presents insights into the direction of the code committee and selected topics to be considered by the ASME O&M Working Group on pressure relief devices. These topics include scope issues, thermal relief valve issues, as-found and as-left set-pressure determinations, exclusions from testing, and cold setpoint bench testing. The purpose of this paper is to describe some significant issues being addressed by the O&M Working Group on Pressure Relief Devices (OM-1). The writer is currently the chair of OM-1 and the statements expressed herein represents his personal opinion.

  8. Significant issues and changes for ANSI/ASME OM-1 1981, part 1, ASME OMc code-1994, and ASME OM Code-1995, Appendix I, inservice testing of pressure relief devices in light water reactor power plants

    International Nuclear Information System (INIS)

    Seniuk, P.J.

    1996-01-01

    This paper identifies significant changes to the ANSI/ASME OM-1 1981, Part 1, and ASME Omc Code-1994 and ASME OM Code-1995, Appendix I, open-quotes Inservice Testing of Pressure Relief Devices in Light-Water Reactor Power Plantsclose quotes. The paper describes changes to different Code editions and presents insights into the direction of the code committee and selected topics to be considered by the ASME O ampersand M Working Group on pressure relief devices. These topics include scope issues, thermal relief valve issues, as-found and as-left set-pressure determinations, exclusions from testing, and cold setpoint bench testing. The purpose of this paper is to describe some significant issues being addressed by the O ampersand M Working Group on Pressure Relief Devices (OM-1). The writer is currently the chair of OM-1 and the statements expressed herein represents his personal opinion

  9. Hierarchically multifunctional K-OMS-2/TiO2/Fe3O4 heterojunctions for the photocatalytic oxidation of humic acid under solar light irradiation.

    Science.gov (United States)

    Zhang, Tong; Yan, Xiaoli; Sun, Darren Delai

    2012-12-01

    A multifunctional heterojunctioned K-OMS-2/TiO(2)/Fe(3)O(4) (KTF) nanocomposite was successfully synthesized using a combination of hydrothermal and co-precipitation techniques. The resultant sample was characterized by XRD, FESEM, TEM, N(2) adsorption, XPS and VSM. Its photocatalytic activity was demonstrated in the photocatalytic degradation of humic acid (HA). Morphology characterization showed the hierarchical structure of the synthesized material, and XRD results revealed that both the rutile and anatase TiO(2) structures are present in the sample. The average pore diameters and BET surface area of the synthesized KTF heterojunctions were 40 nm and 134.42 m(2)/g, respectively. XPS spectra confirmed the presence of Fe(3)O(4) and TiO(2) in the synthesized material, and the valences of Mn were kept at +3 and +4 after the grafting of Fe(3)O(4) and TiO(2). The synthesized material showed good magnetic response and photocatalytic activity under simulated solar light irradiation, and 85.7% of HA was decomposed after 120 min in the presence of KTF nanocomposites. The reusability study suggested that the magnetic recovered material was stable enough for multiple recycling usages, verifying its potential application in water purification. Copyright © 2012 Elsevier B.V. All rights reserved.

  10. Study of the 6-n-propyl-2 thiouracil (PTU) as radioprotector in the thyroid cancer; Estudio del 6 propil-2 tiouracilo (PTU) como radioprotector en el tratamiento del cancer de tiroides

    Energy Technology Data Exchange (ETDEWEB)

    Perona, Marina; Dagrosa, Maria A; Pisarev, Mario A; Juvenal, Guillelrmo J [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Radiogiologia; Pagotto, R; Pignataro, O [Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET), Buenos Aires (Argentina). Instituto de Biologia y Medicina Experimental; Casal, M [Instituto Nacional de Oncologia ' Angel H. Roffo' , Buenos Aires (Argentina)

    2007-07-01

    epidemiologicos han demostrado que la exposicion a altas dosis de radiacion externa incrementa la frecuencia de neoplasias de tiroides, particularmente cuando la misma ocurre en la niniez o en la adolescencia. El uso de radioprotectores de la tiroides seria de utilidad para evitar efectos tumorigenicos en la glandula cuando la radiacion ionizante en la zona del cuello es la unica terapia posible. Objetivos: Estudiar el posible efecto radioprotector de la droga antitiroidea 6 propil-2 tiouracilo (PTU). Se cultivaron celulas tiroideas normales (linea FRTL-5 de rata) y patologicas (lineas de cancer humano tiroideo anaplasico ARO). Las mismas fueron irradiadas con una fuente de 60Co (1Gy/min) en dosis variables entre 1 y 8 Gy, en presencia y ausencia de PTU (1 mM). A posteriori se evaluo el danio post radiacion mediante el ensayo de formacion de colonias tomando la fraccion de sobrevida (FS) como indicador del efecto. Resultados: La FS aumento respecto del Control en ambas lineas celulares para todas las dosis utilizadas. La relacion PTU vs. Control fue de 2,3 y 2,7 para las celulas ARO y FRTL-5 respectivamente. El efecto radioprotector del PTU es el mismo si es agregado 24 hs antes o inmediatamente post irradiacion. Dado que se ha demostrado que el aumento de la radioresistencia de los tejidos puede inducirse mediante la estimulacion de las vias del AMP ciclico (cAMP), se midieron los niveles del segundo mensajero luego de incubar las lineas celulares durante 5, 24, 48 y 72 horas con diferentes concentraciones de PTU (0; 0,1 mM; 1 mM y 2 mM). El PTU aumento los niveles intra y extracelulares del cAMP en todos los tratamientos. Se observo un pico a las 24 hs en los niveles extracelulares incubados con PTU 1 mM de 36,97 {+-} 6,37 (fmol/{mu}g de prot) vs Control 16,67 {+-} 3,92 (fmol/{mu}g de prot). El efecto radioprotector del PTU fue mimetizado por el cAMP. Conclusion: El PTU ejerce un efecto radioprotector estimulando la via del cAMP. (autor)

  11. Investigation on pseudosymmetry, twinning and disorder in crystal structure determinations: Ba(H2O)M2III[PO3(OH)]4 (M=Fe, V) as examples

    International Nuclear Information System (INIS)

    Sun Wei; Huang Yaxi; Pan Yuanming; Mi Jinxiao

    2012-01-01

    Twinning commonly occurs in monoclinic crystals with dimensionally similar a and c axes and results in pseudo-orthorhombic symmetries with overlapping diffractions. For example, twinning in the new synthetic compound Ba(H 2 O)Fe 2 [PO 3 (OH)] 4 , which varies in space group from P2 1 to P2 1 /c with approximately equal a and c axial lengths, gives rise to a pseudosymmetry of C222 1 . Similarly, the related compound Ba(H 2 O)V 2 [PO 3 (OH)] 4 is commonly twinned and varies in space groups as well, arising from ordered to disordered distributions of the barium cations and water molecules in the cavities. Moreover, analyses of these and other twinned structures show that the small average standard uncertainty of bond distances is a sensitive criterion for structure determinations, especially for those involving crystal twinning as well as order–disorder. A proper structure determination leads to small standard uncertainties of the atomic displacement parameters, which further result in the small standard uncertainties of bond distances. - Graphical abstract: Ba(H 2 O)M 2 III [PO 3 (OH)] 4 (M=Fe, V) varies in space group from P2 1 to P2 1 /c, arising from ordered to disordered distributions of Ba 2+ and H 2 O in the cavities. Highlights: ► Twinning commonly occurs in monoclinic crystals with a≈c. ► Overlapping diffractions from twin domains hamper with the determination of real space groups. ► Conventional criteria for evaluating the real space groups are not effective in this case. ► Small standard uncertainty of bond distances is proposed as a sensitive criterion. ► Using this criterion we determined the order–disorder structures of Ba(H 2 O)M 2 III [PO 3 (OH)] 4 (M=Fe, V) from twinned crystals.

  12. Study of the rearrangement of N-alkylanilines to P-aminoalkylbencene. III. N-n-propil-l-14C aniline

    International Nuclear Information System (INIS)

    Molera, J. M.; Gamboa, J. M.; Val del Cob, M.; Ortin, N.

    1964-01-01

    The rearrangement of N-n-propyl aniline to p-amino propylbenzene has been studied at 250 degree centigrade using several catalysts: CoCl 2 , ZnCl 2 and HBr. N-propyl-1-14 C -aniline has been synthesized from sodium propionate-1-14 C through conversion to n-propyl-1-14 C -iodide and further reaction with aniline. After the rearrangement and among the reaction products both p-aminopropylbenzene and p-aminoisopropylbencene were found. To determine the 14 C position in both the starting aniline and reaction products two degradation schemes are followed. In the light of experimental evidence a mechanism is set forth based on the assumption of an organic cation as intermediate. (Author) 13 refs

  13. Manganese oxide octahedral molecular sieve K-OMS-2 as catalyst in post plasma-catalysis for trichloroethylene degradation in humid air

    International Nuclear Information System (INIS)

    Nguyen Dinh, M.T.; Giraudon, J.-M.; Vandenbroucke, A.M.; Morent, R.; De Geyter, N.; Lamonier, J.-F.

    2016-01-01

    Highlights: • Post plasma catalysis: negative DC glow discharge combined with a cryptomelane. • The α-MnO_2 catalyst totally decomposes the NTP generated ozone. • Active oxygen oxidizes the end-up plasma VOC by-products. - Abstract: The total oxidation of trichloroethylene (TCE) in air at low relative humidity (RH = 10%) in the presence of CO_2 (520 ppmv) was investigated in function of energy density using an atmospheric pressure negative DC luminescent glow discharge combined with a cryptomelane catalyst positioned downstream of the plasma reactor at a temperature of 150 °C. When using Non-Thermal Plasma (NTP) alone, it is found a low COx (x = 1–2) yield in agreement with the detection of gaseous polychlorinated by-products in the outlet stream as well as ozone which is an harmful pollutant. Introduction of cryptomelane enhanced trichloroethylene removal, totally inhibited plasma ozone formation and increased significantly the COx yield. The improved performances of the hybrid system were mainly ascribed to the total destruction of plasma generated ozone on cryptomelane surface to produce active oxygen species. Consequently these active oxygen species greatly enhanced the abatement of the plasma non-reacted TCE and completely destroyed the hazardous plasma generated polychlorinated intermediates. The facile redox of Mn species associated with oxygen vacancies and mobility as well as the textural properties of the catalyst might also contribute as a whole to the efficiency of the process.

  14. Manganese oxide octahedral molecular sieve K-OMS-2 as catalyst in post plasma-catalysis for trichloroethylene degradation in humid air

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen Dinh, M.T. [Université Lille, Sciences et Technologies, Unité de Catalyse et Chimie du Solide UMR CNRS UCCS 8181, 59655 Villeneuve d’Ascq (France); The University of Da-Nang, University of Science and Technology, 54, Nguyen Luong Bang, Da-Nang (Viet Nam); Giraudon, J.-M., E-mail: jean-marc.giraudon@univ-lille1.fr [Université Lille, Sciences et Technologies, Unité de Catalyse et Chimie du Solide UMR CNRS UCCS 8181, 59655 Villeneuve d’Ascq (France); Vandenbroucke, A.M.; Morent, R.; De Geyter, N. [Ghent University, Faculty of Engineering and Architecture, Department of Applied Physics, Research Unit Plasma Technology, Sint-Pietersnieuwstraat 41, 9000 Ghent (Belgium); Lamonier, J.-F. [Université Lille, Sciences et Technologies, Unité de Catalyse et Chimie du Solide UMR CNRS UCCS 8181, 59655 Villeneuve d’Ascq (France)

    2016-08-15

    Highlights: • Post plasma catalysis: negative DC glow discharge combined with a cryptomelane. • The α-MnO{sub 2} catalyst totally decomposes the NTP generated ozone. • Active oxygen oxidizes the end-up plasma VOC by-products. - Abstract: The total oxidation of trichloroethylene (TCE) in air at low relative humidity (RH = 10%) in the presence of CO{sub 2} (520 ppmv) was investigated in function of energy density using an atmospheric pressure negative DC luminescent glow discharge combined with a cryptomelane catalyst positioned downstream of the plasma reactor at a temperature of 150 °C. When using Non-Thermal Plasma (NTP) alone, it is found a low COx (x = 1–2) yield in agreement with the detection of gaseous polychlorinated by-products in the outlet stream as well as ozone which is an harmful pollutant. Introduction of cryptomelane enhanced trichloroethylene removal, totally inhibited plasma ozone formation and increased significantly the COx yield. The improved performances of the hybrid system were mainly ascribed to the total destruction of plasma generated ozone on cryptomelane surface to produce active oxygen species. Consequently these active oxygen species greatly enhanced the abatement of the plasma non-reacted TCE and completely destroyed the hazardous plasma generated polychlorinated intermediates. The facile redox of Mn species associated with oxygen vacancies and mobility as well as the textural properties of the catalyst might also contribute as a whole to the efficiency of the process.

  15. Facile one-step template-free synthesis of uniform hollow microstructures of cryptomelane-type manganese oxide K-OMS-2.

    Science.gov (United States)

    Galindo, Hugo M; Carvajal, Yadira; Njagi, Eric; Ristau, Roger A; Suib, Steven L

    2010-08-17

    Hollow microstructures of cryptomelane-type manganese oxide were produced in a template-free one-step process based on the fine-tuning of the oxidation rate of manganese species during the synthesis. The tuning of the reaction rate brought about by a mixture of the oxidants oxone and potassium nitrate becomes apparent from the gradual physical changes taking place in the reaction medium at early times of the synthesis. The successful synthesis of the hollow uniform structures could be performed in the ranges 120-160 degrees C and 8.2-10.7 for temperature and mass ratio oxone/potassium nitrate, respectively. Independent of the conditions of the synthesis, all of the complex microstructures showed the same pattern for the array of very long nanofibers in which some of these elongated around the surface confining the cavity and the other fibers grew normal to the surface created by the previous arrangement. A mechanism based on the heterogeneous nucleation of the cryptomelane phase on the surface of an amorphous precursor and the growth of the nanoscale fibers by processes such as dissolution-crystallization and lateral attachment of primary nanocrystalline fibers is proposed to explain the formation of the hollow structures.

  16. Urchin-like cobalt incorporated manganese oxide OMS-2 hollow spheres: Synthesis, characterization and catalytic degradation of RhB dye

    Science.gov (United States)

    Ahmed, Khalid Abdelazez Mohamed; Li, Buyi; Tan, Bien; Huang, Kaixun

    2013-01-01

    Urchin-like KxCoyMn8-yO16 hollow spheres assembled from nanoplate building blocks were successfully fabricated via a one-pot hydrothermal route using cobalt acetate and potassium permanganate as raw material. The products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectrometer, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM) measurement. The thermal stability and surface areas of cobalt ion in the manganese sites of KMn8O16 structures were clearly evidenced by TGA and N2 adsorption-desorption isotherms curves. Based on time depended experiment results, a possible formation mechanism for this structures was proposed. The catalytic degradation of Rhodamine B (RhB) on KxCoyMn8-yO16 materials has, therefore been dependent for the molar precursor ratio and specific surface area of the as-fabricated products. UV-vis, LC-MS and barium hydroxide methods were utilized to monitor the temporal course of the catalytic reaction.

  17. Manganese oxide octahedral molecular sieve K-OMS-2 as catalyst in post plasma-catalysis for trichloroethylene degradation in humid air.

    Science.gov (United States)

    Nguyen Dinh, M T; Giraudon, J-M; Vandenbroucke, A M; Morent, R; De Geyter, N; Lamonier, J-F

    2016-08-15

    The total oxidation of trichloroethylene (TCE) in air at low relative humidity (RH=10%) in the presence of CO2 (520ppmv) was investigated in function of energy density using an atmospheric pressure negative DC luminescent glow discharge combined with a cryptomelane catalyst positioned downstream of the plasma reactor at a temperature of 150°C. When using Non-Thermal Plasma (NTP) alone, it is found a low COx (x=1-2) yield in agreement with the detection of gaseous polychlorinated by-products in the outlet stream as well as ozone which is an harmful pollutant. Introduction of cryptomelane enhanced trichloroethylene removal, totally inhibited plasma ozone formation and increased significantly the COx yield. The improved performances of the hybrid system were mainly ascribed to the total destruction of plasma generated ozone on cryptomelane surface to produce active oxygen species. Consequently these active oxygen species greatly enhanced the abatement of the plasma non-reacted TCE and completely destroyed the hazardous plasma generated polychlorinated intermediates. The facile redox of Mn species associated with oxygen vacancies and mobility as well as the textural properties of the catalyst might also contribute as a whole to the efficiency of the process. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Determinação simultânea de metil, etil, propil e butilparabeno adsorvido em cabelo por cze-uv mediante stacking por polaridade reversa automática

    OpenAIRE

    Sako, Alysson Vasques Fernandes

    2015-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Ciências Físicas e Matemáticas, Programa de Pós-Graduação em Química, Florianópolis, 2015. Os parabenos são ésteres derivados do ácido p-hidroxibenzóico. Esses compostos orgânicos são incolores, inodoros e apresentam atividades bactericidas. Devido a essas características, os parabenos são utilizados como conservantes em produtos como fármacos, cosméticos e alimentos desde de a década de 1920. Entretanto, estudos p...

  19. Polar and non-polar organic aerosols from large-scale agricultural-waste burning emissions in Northern India: Implications to organic mass-to-organic carbon ratio.

    Science.gov (United States)

    Rajput, Prashant; Sarin, M M

    2014-05-01

    This study focuses on characteristics of organic aerosols (polar and non-polar) and total organic mass-to-organic carbon ratio (OM/OC) from post-harvest agricultural-waste (paddy- and wheat-residue) burning emissions in Northern India. Aerosol samples from an upwind location (Patiala: 30.2°N, 76.3°E) in the Indo-Gangetic Plain were analyzed for non-polar and polar fractions of organic carbon (OC1 and OC2) and their respective mass (OM1 and OM2). On average, polar organic aerosols (OM2) contribute nearly 85% of the total organic mass (OM) from the paddy- and wheat-residue burning emissions. The water-soluble-OC (WSOC) to OC2 ratio, within the analytical uncertainty, is close to 1 from both paddy- and wheat-residue burning emissions. However, temporal variability and relatively low WSOC/OC2 ratio (Av: 0.67±0.06) is attributed to high moisture content and poor combustion efficiency during paddy-residue burning, indicating significant contribution (∼30%) of aromatic carbon to OC2. The OM/OC ratio for non-polar (OM1/OC1∼1.2) and polar organic aerosols (OM2/OC2∼2.2), hitherto unknown for open agricultural-waste burning emissions, is documented in this study. The total OM/OC ratio is nearly identical, 1.9±0.2 and 1.8±0.2, from paddy- and wheat-residue burning emissions. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Pre-operative assessment of residual disease in locally advanced breast cancer patients: A sequential study by quantitative diffusion weighted MRI as a function of therapy.

    Science.gov (United States)

    Agarwal, Khushbu; Sharma, Uma; Sah, Rani G; Mathur, Sandeep; Hari, Smriti; Seenu, Vurthaluru; Parshad, Rajinder; Jagannathan, Naranamangalam R

    2017-10-01

    The potential of diffusion weighted imaging (DWI) in assessing pathologic response and surgical margins in locally advanced breast cancer patients (n=38) undergoing neoadjuvant chemotherapy was investigated. DWI was performed at pre-therapy (Tp0), after I (Tp1) and III (Tp3) NACT at 1.5T. Apparent diffusion coefficient (ADC) of whole tumor (ADC WT ), solid tumor (ADC ST ), intra-tumoral necrosis (ADC Nec ) was determined. Further, ADC of 6 consecutive shells (5mm thickness each) including tumor margin to outside tumor margins (OM1 to OM5) was calculated and the data analyzed to define surgical margins. Of 38 patients, 6 were pathological complete responders (pCR), 19 partial responders (pPR) and 13 were non-responders (pNR). Significant increase was observed in ADC ST and ADC WT in pCR and pPR following therapy. Pre-therapy ADC was significantly lower in pCR compared to pPR and pNR indicating the heterogeneous nature of tumor which may affect drug perfusion and consequently the response. ADC of outside margins (OM1, OM2, and OM3) was significantly different among pCR, pPR and pNR at Tp3 which may serve as response predictive parameter. Further, at Tp3, ADC of outside margins (OM1, OM2, and OM3) was significantly lower compared to that seen at Tp0 in pCR, indicating the presence of residual disease in these shells. Pre-surgery information may serve as a guide to define cancer free margins and the extent of residual disease which may be useful in planning breast conservation surgery. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Dissolution of arsenic minerals mediated by dissimilatory arsenate reducing bacteria: estimation of the physiological potential for arsenic mobilization.

    Science.gov (United States)

    Lukasz, Drewniak; Liwia, Rajpert; Aleksandra, Mantur; Aleksandra, Sklodowska

    2014-01-01

    The aim of this study was characterization of the isolated dissimilatory arsenate reducing bacteria in the context of their potential for arsenic removal from primary arsenic minerals through reductive dissolution. Four strains, Shewanella sp. OM1, Pseudomonas sp. OM2, Aeromonas sp. OM4, and Serratia sp. OM17, capable of anaerobic growth with As (V) reduction, were isolated from microbial mats from an ancient gold mine. All of the isolated strains: (i) produced siderophores that promote dissolution of minerals, (ii) were resistant to dissolved arsenic compounds, (iii) were able to use the dissolved arsenates as the terminal electron acceptor, and (iii) were able to use copper minerals containing arsenic minerals (e.g., enargite) as a respiratory substrate. Based on the results obtained in this study, we postulate that arsenic can be released from some As-bearing polymetallic minerals (such as copper ore concentrates or middlings) under reductive conditions by dissimilatory arsenate reducers in indirect processes.

  2. Dynamical back-action at 5.5 GHz in a corrugated optomechanical beam

    Energy Technology Data Exchange (ETDEWEB)

    Navarro-Urrios, D., E-mail: daniel.navarrourrios@nano.cnr.it [Catalan Institute of Nanoscience and Nanotechnology, Campus UAB, Edifici ICN2, 08193 Bellaterra (Spain); NEST, Istituto Nanoscienze – CNR and Scuola Normale Superiore, Piazza San Silvestro 12, Pisa, I-56127 (Italy); Gomis-Bresco, J.; Alzina, F. [Catalan Institute of Nanoscience and Nanotechnology, Campus UAB, Edifici ICN2, 08193 Bellaterra (Spain); El-Jallal, S. [IEMN, Universite de Lille 1, Villeneuve d’Ascq (France); PRILM, Université Moulay Ismail, Faculté des sciences, Meknès (Morocco); Oudich, M.; Pennec, Y.; Djafari-Rouhani, B. [IEMN, Universite de Lille 1, Villeneuve d’Ascq (France); Pitanti, A. [NEST, Istituto Nanoscienze – CNR and Scuola Normale Superiore, Piazza San Silvestro 12, Pisa, I-56127 (Italy); Capuj, N. [Depto. Física, Universidad de la Laguna, 38206 (Spain); Tredicucci, A. [NEST, Istituto Nanoscienze – CNR and Scuola Normale Superiore, Piazza San Silvestro 12, Pisa, I-56127 (Italy); Dipartimento di Fisica, Universita di Pisa, Largo Pontecorvo 3, I-56127 Pisa (Italy); Griol, A.; Martínez, A. [Nanophotonics Technology Center, Universitat Politècnica de València, Valencia (Spain); Sotomayor Torres, C. M. [Catalan Institute of Nanoscience and Nanotechnology, Campus UAB, Edifici ICN2, 08193 Bellaterra (Spain); Catalan Institution for Research and Advanced Studies (ICREA), 08010 Barcelona (Spain)

    2014-12-15

    We report on the optomechanical properties of a breathing mechanical mode oscillating at 5.5 GHz in a 1D corrugated Si nanobeam. This mode has an experimental single-particle optomechanical coupling rate of |g{sub o,OM}| = 1.8 MHz (|g{sub o,OM}|/2π = 0.3 MHz) and shows strong dynamical back-action effects at room temperature. The geometrical flexibility of the unit-cell would lend itself to further engineering of the cavity region to localize the mode within the full phononic band-gap present at 4 GHz while keeping high g{sub o,OM} values. This would lead to longer lifetimes at cryogenic temperatures, due to the suppression of acoustic leakage.

  3. Semiempirical Quantum-Chemical Orthogonalization-Corrected Methods: Benchmarks for Ground-State Properties.

    Science.gov (United States)

    Dral, Pavlo O; Wu, Xin; Spörkel, Lasse; Koslowski, Axel; Thiel, Walter

    2016-03-08

    The semiempirical orthogonalization-corrected OMx methods (OM1, OM2, and OM3) go beyond the standard MNDO model by including additional interactions in the electronic structure calculation. When augmented with empirical dispersion corrections, the resulting OMx-Dn approaches offer a fast and robust treatment of noncovalent interactions. Here we evaluate the performance of the OMx and OMx-Dn methods for a variety of ground-state properties using a large and diverse collection of benchmark sets from the literature, with a total of 13035 original and derived reference data. Extensive comparisons are made with the results from established semiempirical methods (MNDO, AM1, PM3, PM6, and PM7) that also use the NDDO (neglect of diatomic differential overlap) integral approximation. Statistical evaluations show that the OMx and OMx-Dn methods outperform the other methods for most of the benchmark sets.

  4. Dissolution of Arsenic Minerals Mediated by Dissimilatory Arsenate Reducing Bacteria: Estimation of the Physiological Potential for Arsenic Mobilization

    Directory of Open Access Journals (Sweden)

    Drewniak Lukasz

    2014-01-01

    Full Text Available The aim of this study was characterization of the isolated dissimilatory arsenate reducing bacteria in the context of their potential for arsenic removal from primary arsenic minerals through reductive dissolution. Four strains, Shewanella sp. OM1, Pseudomonas sp. OM2, Aeromonas sp. OM4, and Serratia sp. OM17, capable of anaerobic growth with As (V reduction, were isolated from microbial mats from an ancient gold mine. All of the isolated strains: (i produced siderophores that promote dissolution of minerals, (ii were resistant to dissolved arsenic compounds, (iii were able to use the dissolved arsenates as the terminal electron acceptor, and (iii were able to use copper minerals containing arsenic minerals (e.g., enargite as a respiratory substrate. Based on the results obtained in this study, we postulate that arsenic can be released from some As-bearing polymetallic minerals (such as copper ore concentrates or middlings under reductive conditions by dissimilatory arsenate reducers in indirect processes.

  5. Semiempirical Quantum Chemical Calculations Accelerated on a Hybrid Multicore CPU-GPU Computing Platform.

    Science.gov (United States)

    Wu, Xin; Koslowski, Axel; Thiel, Walter

    2012-07-10

    In this work, we demonstrate that semiempirical quantum chemical calculations can be accelerated significantly by leveraging the graphics processing unit (GPU) as a coprocessor on a hybrid multicore CPU-GPU computing platform. Semiempirical calculations using the MNDO, AM1, PM3, OM1, OM2, and OM3 model Hamiltonians were systematically profiled for three types of test systems (fullerenes, water clusters, and solvated crambin) to identify the most time-consuming sections of the code. The corresponding routines were ported to the GPU and optimized employing both existing library functions and a GPU kernel that carries out a sequence of noniterative Jacobi transformations during pseudodiagonalization. The overall computation times for single-point energy calculations and geometry optimizations of large molecules were reduced by one order of magnitude for all methods, as compared to runs on a single CPU core.

  6. Validation of the IHE Cohort Model of Type 2 Diabetes and the impact of choice of macrovascular risk equations.

    Directory of Open Access Journals (Sweden)

    Adam Lundqvist

    Full Text Available Health-economic models of diabetes are complex since the disease is chronic, progressive and there are many diabetic complications. External validation of these models helps building trust and satisfies demands from decision makers. We evaluated the external validity of the IHE Cohort Model of Type 2 Diabetes; the impact of using alternative macrovascular risk equations; and compared the results to those from microsimulation models.The external validity of the model was analysed from 12 clinical trials and observational studies by comparing 167 predicted microvascular, macrovascular and mortality outcomes to the observed study outcomes. Concordance was examined using visual inspection of scatterplots and regression-based analysis, where an intercept of 0 and a slope of 1 indicate perfect concordance. Additional subgroup analyses were conducted on 'dependent' vs. 'independent' endpoints and microvascular vs. macrovascular vs. mortality endpoints.Visual inspection indicates that the model predicts outcomes well. The UKPDS-OM1 equations showed almost perfect concordance with observed values (slope 0.996, whereas Swedish NDR (0.952 and UKPDS-OM2 (0.899 had a slight tendency to underestimate. The R2 values were uniformly high (>0.96. There were no major differences between 'dependent' and 'independent' outcomes, nor for microvascular and mortality outcomes. Macrovascular outcomes tended to be underestimated, most so for UKPDS-OM2 and least so for NDR risk equations.External validation indicates that the IHE Cohort Model of Type 2 Diabetes has predictive accuracy in line with microsimulation models, indicating that the trade-off in accuracy using cohort simulation might not be that large. While the choice of risk equations was seen to matter, each were associated with generally reasonable results, indicating that the choice must reflect the specifics of the application. The largest variation was observed for macrovascular outcomes. There, NDR

  7. Study of the rearrangement of N-alkylanilines to P-aminoalkylbencene. III. N-n-propil-l-14{sup C} aniline; Estudio de la transposicion de N-Alquilanilinas a p-Aminoalquibenceno mediante 14{sup C}. III. N-n Propilanilina

    Energy Technology Data Exchange (ETDEWEB)

    Molera, J M; Gamboa, J M; Val del Cob, M; Ortin, N

    1964-07-01

    The rearrangement of N-n-propyl aniline to p-amino propylbenzene has been studied at 250 degree centigrade using several catalysts: CoCl{sub 2}, ZnCl{sub 2} and HBr. N-propyl-1-14{sup C}-aniline has been synthesized from sodium propionate-1-14{sup C} through conversion to n-propyl-1-14{sup C}-iodide and further reaction with aniline. After the rearrangement and among the reaction products both p-aminopropylbenzene and p-aminoisopropylbencene were found. To determine the 14{sup C} position in both the starting aniline and reaction products two degradation schemes are followed. In the light of experimental evidence a mechanism is set forth based on the assumption of an organic cation as intermediate. (Author) 13 refs.

  8. Síntese e caracterização de dispersões aquosas de poliuretanos à base de copolímeros em bloco de poli(glicol etilênico e poli(glicol propilênico Synthesis and characterization of polyurethane aquous dispersions based on poly(ethylene glycol and poly(propylene glycol block copolymers

    Directory of Open Access Journals (Sweden)

    Fernanda M. B. Coutinho

    2008-01-01

    Full Text Available Non-polluting polyurethane aqueous dispersions, with 40% of solids content, were synthesized based on block copolymers of poly(ethylene glycol and poly(propylene glycol (PEG-b-PPG, with PEG hydrophilic segments content of 7 and 25%, poly(propylene glycol (PPG, dimethylolpropionic acid (DMPA, isophorone diisocyanate (IPDI, and hydrazine. Different formulations were synthesized by varying the equivalent-grams ratios between isocyanate and hydroxyl groups (NCO/OH and PPG and (PEG-b-PPG. The presence of high amounts of PEG in the formulations provoked the formation of gels. Average particle size and viscosity of the dispersions were determined. Mechanical properties and water absorption resistance of cast films were evaluated.

  9. Encapsulation of aluminum phosphate nanoparticles (AiPO{sub 4}) functionalized with 3-mercapto-propyl trimethoxy-silane (MPTMS) by mini emulsion polymerization; Encapsulacao de nanoparticulas de fosfato de aluminio (AiPO{sub 4}) funcionalizadas com trimetoxsilano propil metacrilato (MPTMS) vip polimerizacao em miniemulsao

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Leticia A. da; Machado, Ricardo A.F.; Araujo, Pedro H.H. de; Sayer, Claudia, E-mail: leticia@enq.ufsc.br [Universidade Federal de Santa Catarina - UFSC, Florianopolis, SC (Brazil); Sudol, Edward D.; El-Aasser, Mohamed S. [Lehigh University, Bethlehem, Pensilvania (United States)

    2011-07-01

    This work aims the use of the mini emulsion polymerization process for the attainment of a copolymer latex made of styrene butyl {eta}-acrylate (50/50) in the presence of 3 wt.% of AlPO{sub 4} with the surface chemically modified with 3-Mercapto-Propyl trimethoxy-Silane (MPTMS) in three different concentrations (5, 10 and 20 wt.% based on AlPO{sub 4}). The confirmation of the AlPO{sub 4} functionalization was made by FTIR. The encapsulation efficiency was analyzed through the density gradient column, energy dispersive X-ray and transmission electron microscopy and the average particles size and its distribution by capillary hydrodynamic fractionation. Results had shown that it was possible to encapsulate the AlPO{sub 4} and that the sample functionalized with 20 wt% of MPTMS resulted in a latex with greater density and a weight average particle size of (Dw) 116 nm. (author)

  10. Transformation from layered to tunnel structures: Synthesis, characterization, and applications of manganese oxide octahedral molecular sieves

    Science.gov (United States)

    Xia, Guan-Guang

    Manganese oxide based octahedral molecular sieves (OMS) have been found to have a wide variety of applications as catalysts, absorbents, and battery materials due to their unique structures and physical and chemical properties. OMS materials are made up of manganese oxide octahedral building blocks sharing comers and edges to form tunnel structures. Manganese species in the framework of OMS materials are mixed valent with various ion-exchangeable cations residing in the tunnels playing important roles in charge balancing and special chemical activities. With different synthetic parameters such as the template used, temperature, pressure, and the pH of the synthetic media, layered birnessite materials were hydrothermally transformed into distinct tunnel structures with different tunnel sizes, including Mg-3x3 (OMS-1), NH4-2x2 (NH4-OMS-2), Na-2x4 (OMS-5), and other manganese oxides. Characterization of the OMS materials with a wide variety of instruments has revealed that most of them are nano-fibrous hollow crystals ith large surface areas, high ion-exchange capabilities, and relatively high thermal stabilities. The Na-2x4 tunnel structure sodium MnOx has been synthesized for the first time and studied in detail, including synthetic strategies, structural analyses, and other physical and chemical property analyses. As catalysts, the synthetic OMS materials show high catalytic activities and shape-selective properties. For example, the results of the competitive oxidation of cycloalkanes with tertiary butyl hydrogen peroxide (TBHP) over different tunnel sized ONIS materials have proven that the OMS materials with larger tunnels are more favorable for the oxidation of the biggest molecule, cyclooctane, than the smallest one, cyclohexane. Besides the tunnel size effects, tunnel cations in the OMS materials also have influences on their catalytic activities. The study of carbon monoxide cleanup for fuel cell applications demonstrates that Ag-OMS-2 (a hollandite

  11. Nivel crítico de zinc en suelos de Costa Rica

    Directory of Open Access Journals (Sweden)

    Eloy Molina

    2006-01-01

    Full Text Available Se determinó el nivel crítico de Zn disponible en 4 órdenes de suelos de Costa Rica (Ultisoles, Vertisoles, Inceptisoles y Andisoles, 25 de cada uno, con 5 soluciones extractoras: Olsen Modificado (OM, Mehlich 3 (M3, Morgan Modificado (MM, DTPA y HCl. La metodología de Cate y Nelson fue utilizada para establecer los niveles críticos. Los niveles críticos de Zn en Ultisoles, expresados en mg l-1, fueron: 2,0 (OM, 1,5 (M3, 0,5 (MM, 0,5 (DTPA, y 4,0 (HCl. En Vertisoles: 3,0 (OM, 3,0 (M3; 0,8 (MM, 1,0 (DTPA, y 1,5 (HCl. En Inceptisoles: 2,3 (OM, 1,7 (M3, 0,6 (MM, 0,8 (DTPA, y 2,5 (HCl. En Andisoles: 3,0 (OM, 2,5 (M3, 0,5 (MM, 1,0 (DTPA, y 3,3 (HCl. Al agrupar los suelos sin dividir en órdenes, hubo una dispersión mayor de los datos en los gráficos de Cate y Nelson, con una gran cantidad de puntos en los cuadrantes superior izquierdo e inferior derecho. Los niveles críticos de Zn en los 100 suelos, expresados en mg l-1, fueron: 2,0 (OM, 2,0 (M3, 0,3 (MM, 0,7 (DTPA, y 3,8 (HCl. Los resultados demostraron la importancia de dividir los suelos en ordenes, para obtener valores críticos mas precisos. La mayoría de estos valores concordaron con los ámbitos de nivel crítico informados por otros investigadores en suelos de diferentes regiones. La solución Mehlich 3 mostró un comportamiento promisorio para identificar problemas de disponibilidad de Zn en suelos de Costa Rica.

  12. POTENTIAL USE OF ORGANIC MINERAL AS MINERAL SOURCE FOR DIET OF JUVENILE VANNAMEI SHRIMP, Penaeus vannamei

    Directory of Open Access Journals (Sweden)

    Asda Laining

    2015-06-01

    Full Text Available The use of organic mineral (OM has been recently introduced in aquaculture both as feed supplement and water quality improvement. A feeding experiment was conducted to evaluate a response dose of OM on growth, survival, and mineral content in whole the body and carapace of vannamei shrimp (Penaeus vannamei. Three diets were supplemented with different levels of organic mineral at 1 (OM1, 2 (OM2 and 4 (OM4 g/100 g diet. Positive control was a diet without OM inclusion but supplemented with commercial mineral mixture at level of 4 g/100 g diet. Juvenile vannamei shrimp with average initial body weight of 3.5±0.1 g were stocked into 12 tanks with a capacity of 200 L. After 75 days feeding trial, highly significant weight gains was observed in shrimp fed OM at all levels compared to the positive control. However, no significant differences were found among dietary OM groups. The growth response was clearly shown by the same values of SGRs in the three OM supplemented groups (1.1%/d and only differed significantly from positive control. Increasing of dietary OM significantly improved survival rate of shrimp where the highest was observed in group fed OM1 and the lowest was in control diet. Effect of dietary OM on whole body Ca and P were quite similar while whole body Ca and P content of OM1 group was slightly high and tended to decrease in two groups with higher level dietary OM. However, no significant differences among the treatment groups. A clear response of supplementing OM in diet was detected on whole body Zn content. Increase of dietary OM resulted in an increase of Zn content in whole body. The effect was clearly shown when diet contained 2% and 4% OM. Carapace Ca content was highly significant when diet contained 2% OM. Similar to whole body Zn content, there was also a linear trend of response dose of dietary OM on carapace Zn content which the highest was found in dietary OM4. Based on growth, survival rate, and Zn

  13. The Culture of Memory in the ”Grandchildren Generation” in Denmark

    DEFF Research Database (Denmark)

    Bjerg, Helle

    2011-01-01

    En empirisk analyse af erindringskultur og historiebevidsthed om 2. verdenskrig og Holocaust i 3. generation efter 2. verdenskrig......En empirisk analyse af erindringskultur og historiebevidsthed om 2. verdenskrig og Holocaust i 3. generation efter 2. verdenskrig...

  14. Manganese dioxide as a new cathode catalyst in microbial fuel cells

    Science.gov (United States)

    Li, Xiang; Hu, Boxun; Suib, Steven; Lei, Yu; Li, Baikun

    This study focused on manganese oxides with a cryptomelane-type octahedral molecular sieve (OMS-2) structure to replace platinum as a cathode catalyst in microbial fuel cells (MFCs). Undoped (ud-OSM-2) and three catalysts doped with cobalt (Co-OMS-2), copper (Cu-OMS-2), and cerium (Ce-OMS-2) to enhance their catalytic performances were investigated. The novel OMS-2 cathodes were examined in granular activated carbon MFC (GACMFC) with sodium acetate as the anode reagent and oxygen in air as the cathode reagent. The results showed that after 400 h of operation, the Co-OMS-2 and Cu-OMS-2 exhibited good catalytic performance in an oxygen reduction reaction (ORR). The voltage of the Co-OMS-2 GACMFC was 217 mV, and the power density was 180 mW m -2. The voltage of the Cu-OMS-2 GACMFC was 214 mV and the power density was 165 mW m -2. The internal resistance (R in) of the OMS-2 GACMFCs (18 ± 1 Ω) was similar to that of the platinum GACMFCs (17 Ω). Furthermore, the degradation rates of organic substrates in the OMS-2 GACMFCs were twice those in the platinum GACMFCs, which enhance their wastewater treatment efficiencies. This study indicated that using OMS-2 manganese oxides to replace platinum as a cathodic catalyst enhances power generation, increases contaminant removal, and substantially reduces the cost of MFCs.

  15. Manganese dioxide as a new cathode catalyst in microbial fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiang; Li, Baikun [Department of Civil and Environmental Engineering, University of Connecticut, Storrs, CT 06269 (United States); Hu, Boxun [Institute of Materials Science, University of Connecticut, Storrs, CT 06269 (United States); Suib, Steven [Institute of Materials Science, University of Connecticut, Storrs, CT 06269 (United States); Department of Chemistry, University of Connecticut, Storrs, CT 06269 (United States); Department of Chemical and Biomolecular Engineering, University of Connecticut, Storrs, CT 06269 (United States); Lei, Yu. [Department of Chemical and Biomolecular Engineering, University of Connecticut, Storrs, CT 06269 (United States)

    2010-05-01

    This study focused on manganese oxides with a cryptomelane-type octahedral molecular sieve (OMS-2) structure to replace platinum as a cathode catalyst in microbial fuel cells (MFCs). Undoped (ud-OSM-2) and three catalysts doped with cobalt (Co-OMS-2), copper (Cu-OMS-2), and cerium (Ce-OMS-2) to enhance their catalytic performances were investigated. The novel OMS-2 cathodes were examined in granular activated carbon MFC (GACMFC) with sodium acetate as the anode reagent and oxygen in air as the cathode reagent. The results showed that after 400 h of operation, the Co-OMS-2 and Cu-OMS-2 exhibited good catalytic performance in an oxygen reduction reaction (ORR). The voltage of the Co-OMS-2 GACMFC was 217 mV, and the power density was 180 mW m{sup -2}. The voltage of the Cu-OMS-2 GACMFC was 214 mV and the power density was 165 mW m{sup -2}. The internal resistance (R{sub in}) of the OMS-2 GACMFCs (18 {+-} 1 {omega}) was similar to that of the platinum GACMFCs (17 {omega}). Furthermore, the degradation rates of organic substrates in the OMS-2 GACMFCs were twice those in the platinum GACMFCs, which enhance their wastewater treatment efficiencies. This study indicated that using OMS-2 manganese oxides to replace platinum as a cathodic catalyst enhances power generation, increases contaminant removal, and substantially reduces the cost of MFCs. (author)

  16. A Non-Precious Metal Promoting the Synthesis of 5-Hydroxymethylfurfural

    Directory of Open Access Journals (Sweden)

    Xinyuan Lu

    2017-11-01

    Full Text Available In this work, a new kind of catalyst was prepared for synthesis of 5-hydroxymethylfurfural. Copper ions were incorporated into manganese oxide octahedral molecular sieves (K-OMS-2. The catalysts Cu-K-OMS-2 were characterized by measuring FTIR spectra, scanning electron microscope images, X-ray diffraction patterns, and temperature-programmed desorption (TPD and temperature-programmed reduction (TPR profiles. Thermogravimetric analysis (TGA demonstrated that the stability of Cu-K-OMS-2 is almost the same as that of K-OMS-2. XRD patterns showed that introducing copper ions did not change the structure of K-OMS-2, but copper ions had an effect on the morphology of K-OMS-2 as illustrated by SEM images. TPD profiles demonstrated that both K-OMS-2 and Cu-K-OMS-2 possess basic and acidic sites, and Cu-K-OMS-2 has weak acidic sites. One-pot synthesis of 2,5-diformylfuran (DFF from fructose was investigated under the catalysis of Cu-K-OMS-2 together with a commercial catalyst Amberlyst 15. The effect of reaction time and temperature on the DFF yield was investigated, and reaction temperature had an effect on the DFF yield. The effect of atomic ratio of Cu to Mn of Cu-K-OMS-2 on the DFF yield was also investigated. The DFF yield was improved 34.7% by Cu-K-OMS-2 in comparison to K-OMS-2, indicating the promotion effect of copper on the DFF yield. Consecutive use of Cu-K-OMS-2 demonstrated that after 6 cycles, the loss of DFF yield was 6.3%, indicating a good reusability of Cu-K-OMS-2.

  17. Carbon dioxide sorption in a nanoporous octahedral molecular sieve

    Science.gov (United States)

    Williamson, Izaak; Nelson, Eric B.; Li, Lan

    2015-08-01

    We have performed first-principles density functional theory calculations, incorporated with van der Waals interactions, to study CO2 adsorption and diffusion in nanoporous solid—OMS-2 (Octahedral Molecular Sieve). We found the charge, type, and mobility of a cation, accommodated in a porous OMS-2 material for structural stability, can affect not only the OMS-2 structural features but also CO2 sorption performance. This paper targets K+, Na+, and Ba2+ cations. First-principles energetics and electronic structure calculations indicate that Ba2+ has the strongest interaction with the OMS-2 porous surface due to valence electrons donation to the OMS-2 and molecular orbital hybridization. However, the Ba-doped OMS-2 has the worst CO2 uptake capacity. We also found evidence of sorption hysteresis in the K- and Na-doped OMS-2 materials.

  18. Catalytic degradation of Acid Orange 7 by manganese oxide octahedral molecular sieves with peroxymonosulfate under visible light irradiation

    International Nuclear Information System (INIS)

    Duan, Lian; Sun, Binzhe; Wei, Mingyu; Luo, Shilu; Pan, Fei; Xu, Aihua; Li, Xiaoxia

    2015-01-01

    Highlights: • OMS-2/PMS/Vis system could efficiently catalyze the degradation of organic dyes. • The system showed much higher activity than that of OMS-2/PMS and OMS-2/Vis. • The OMS-2 catalyst exhibited stable performance for multiple runs. • Sulfate radicals were suggested to be the major reactive species in the system. • The radicals production might involve the redox cycle of Mn(IV)/Mn(III) and Mn(III)/Mn(II). - Abstract: In this paper, the photodegradation of Acid Orange 7 (AO7) in aqueous solutions with peroxymonosulfate (PMS) was studied with manganese oxide octahedral molecular sieves (OMS-2) as the catalyst. The activities of different systems including OMS-2 under visible light irradiation (OMS-2/Vis), OMS-2/PMS and OMS-2/PMS/Vis were evaluated. It was found that the efficiency of OMS-2/PMS was much higher than that of OMS-2/Vis and could be further enhanced by visible light irradiation. The catalyst also exhibited stable performance for multiple runs. Results from ESR and XPS analyses suggested that the highly catalytic activity of the OMS-2/PMS/Vis system possible involved the activation of PMS to sulfate radicals meditated by the redox pair of Mn(IV)/Mn(III) and Mn(III)/Mn(II), while in the OMS-2/PMS system, only the redox reaction between Mn(IV)/Mn(III) occurred. Several operational parameters, such as dye concentration, catalyst load, PMS concentration and solution pH, affected the degradation of AO7

  19. Quantificação de aminas primárias nas fases gasosa e particulada em ar ambiente impactado pela combustão de mistura diesel/biodiesel (B5)

    OpenAIRE

    Priscila Brugin

    2014-01-01

    As aminas são substâncias básicas presentes na atmosfera que reagem com espécies ácidas formando material particulado secundário. São geradas durante os processos de combustão e podem causar impacto na saúde humana e nos ecossistemas. A utilização do biodiesel como biocombustível adicionado ao diesel vem crescendo e há a necessidade de esclarecimento sobre o impacto do seu uso no ambiente. Foram estudadas quatro aminas alifáticas primárias (metil, etil, propil e butilamina) no terminal centra...

  20. Catalytic degradation of Acid Orange 7 by manganese oxide octahedral molecular sieves with peroxymonosulfate under visible light irradiation.

    Science.gov (United States)

    Duan, Lian; Sun, Binzhe; Wei, Mingyu; Luo, Shilu; Pan, Fei; Xu, Aihua; Li, Xiaoxia

    2015-03-21

    In this paper, the photodegradation of Acid Orange 7 (AO7) in aqueous solutions with peroxymonosulfate (PMS) was studied with manganese oxide octahedral molecular sieves (OMS-2) as the catalyst. The activities of different systems including OMS-2 under visible light irradiation (OMS-2/Vis), OMS-2/PMS and OMS-2/PMS/Vis were evaluated. It was found that the efficiency of OMS-2/PMS was much higher than that of OMS-2/Vis and could be further enhanced by visible light irradiation. The catalyst also exhibited stable performance for multiple runs. Results from ESR and XPS analyses suggested that the highly catalytic activity of the OMS-2/PMS/Vis system possible involved the activation of PMS to sulfate radicals meditated by the redox pair of Mn(IV)/Mn(III) and Mn(III)/Mn(II), while in the OMS-2/PMS system, only the redox reaction between Mn(IV)/Mn(III) occurred. Several operational parameters, such as dye concentration, catalyst load, PMS concentration and solution pH, affected the degradation of AO7. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Structural Defects of Silver Hollandite, Ag(x)Mn8O(y), Nanorods: Dramatic Impact on Electrochemistry.

    Science.gov (United States)

    Wu, Lijun; Xu, Feng; Zhu, Yimei; Brady, Alexander B; Huang, Jianping; Durham, Jessica L; Dooryhee, Eric; Marschilok, Amy C; Takeuchi, Esther S; Takeuchi, Kenneth J

    2015-08-25

    Hollandites (OMS-2) are an intriguing class of sorbents, catalysts, and energy storage materials with a tunnel structure permitting one-dimensional insertion and deinsertion of ions and small molecules along the c direction. A 7-fold increase in delivered capacity for Li/AgxMn8O16 electrochemical cells (160 versus 23 mAh/g) observed upon a seemingly small change in silver content (x ∼1.1 (L-Ag-OMS-2) and 1.6 (H-Ag-OMS-2)) led us to characterize the structure and defects of the silver hollandite material. Herein, Ag hollandite nanorods are studied through the combined use of local (atomic imaging, electron diffraction, electron energy-loss spectroscopy) and bulk (synchrotron based X-ray diffraction, thermogravimetric analysis) techniques. Selected area diffraction and high resolution transmission electron microscopy show a structure consistent with that refined by XRD; however, the Ag occupancy varies significantly even within neighboring channels. Both local and bulk measurements indicate a greater quantity of oxygen vacancies in L-Ag-OMS-2, resulting in lower average Mn valence relative to H-Ag-OMS-2. Electron energy loss spectroscopy shows a lower Mn oxidation state on the surface relative to the interior of the nanorods, where the average Mn valence is approximately Mn(3.7+) for H-Ag-OMS-2 and Mn(3.5+) for L-Ag-OMS-2 nanorods, respectively. The higher delivered capacity of L-Ag-OMS-2 may be related to more oxygen vacancies compared to H-Ag-OMS-2. Thus, the oxygen vacancies and MnO6 octahedra distortion are assumed to open the MnO6 octahedra walls, facilitating Li diffusion in the ab plane. These results indicate crystallite size and surface defects are significant factors affecting battery performance.

  2. First principles density functional theory study of Pb doped α-MnO2 catalytic materials

    Science.gov (United States)

    Song, Zilin; Yan, Zhiguo; Yang, Xiaojun; Bai, Hang; Duan, Yuhua; Yang, Bin; Leng, Li

    2018-03-01

    The impact of Pb in the tunnels of manganese oxide octahedral molecular sieves on chemical state of Mn species and lattice oxygen were investigated utilizing density functional theory calculations. The results show that the Pb dopant in the tunnels of OMS-2 could reduce the average valence states of Mn. The lower energy required for bulk oxygen defects formation in Pb-OMS-2 validates the activation of lattice oxygen by inclusion of tunnel dopant. The inclusion of Pb promotes the catalytic oxidation activity of OMS-2 by reducing the energy required for the surface lattice oxygen migration during the Mars - van Krevelen oxidation process.

  3. Dielectric properties of PMMA-SiO2 hybrid films

    KAUST Repository

    Morales-Acosta, M. D.; Quevedo-Ló pez, Manuel Angel Quevedo; Alshareef, Husam N.; Gnade, Bruce E.; Ramí rez-Bon, Rafael

    2010-01-01

    Organic-inorganic hybrid films were synthesized by a modified sol-gel process. PMMASiO2 films were prepared using methylmethacrylate (MMA), tetraethil-orthosilicate (TEOS) as silicon dioxide source, and 3-trimetoxi-silil-propil-methacrylate (TMSPM) as coupling agent. FTIR measurements were performed on the hybrid films to confirm the presence of PMMA-SiO2 bonding. In addition, metal-insulator-metal (MIM) devices were fabricated to study the dielectric constant of the films as function of frequency (1 KHz to 1 MHz). Electrical results show a weak trend of the dielectric constant of the hybrid films with MMA molar ratio. More importantly, the PMMA-SiO2 hybrid films showed a higher dielectric constant than SiO2 and PMMA layers, which is likely due to the presence of additional C-O-C bond. © (2010) Trans Tech Publications.

  4. Análise de parabenos em amostras de água de cultivo de tilápia do Nilo (Oreochromis niloticus) e efeitos em biomarcadores bioquímicos

    OpenAIRE

    Daniele Caetano da Silva

    2015-01-01

    Os parabenos utilizados como conservantes nas indústrias de cosméticos, alimentos e fármacos não são removidos por completo nas estações de tratamento de água e esgoto, além disso, podem causar danos a biota aquática. O presente estudo teve como finalidade aplicar um método analítico novo para quantificar o metil (MP), etil (EP), propil (PP), butil (BP), benzilparabeno (BzP) e a mistura (metil e propilparabeno) em amostras de água dos aquários com tilápias do Nilo (Oreochromis niloticus). A t...

  5. Validación de un método analítico para la determinación cuantitativa de parabenos en el gel de hidróxido de aluminio Validation of an analytical method for the quantitative determination of parabens in aluminum hydroxide gel

    OpenAIRE

    Ernesto Benítez Hechavarría; Ciro Labrada Estrada; Enriqueta Martínez Martínez; Odalis Tamayo Fuentes; Esther Díaz Pérez

    2006-01-01

    Se realizó la valoración prospectiva de un método desarrollado para la cuantificación de metil y de propil parabeno en el gel de hidróxido de aluminio mediante cromatografía líquida de alta resolución en fase reversa, con columna RP18 (25* 0,4 cm) y detector UV-Visible a 254 nm. Se evaluaron los parámetros especificidad, linealidad, precisión, exactitud, y adecuación cromatográfica. Los resultados obtenidos mostraron que el método cumple con las especificaciones establecidas para cada parámet...

  6. Parabenos : convergências e divergências científicas e regulatórias

    OpenAIRE

    Christiane da Silva Coelho

    2013-01-01

    A segurança de produtos cosméticos tem despertado crescente atenção nas últimas décadas e o estudo da toxicidade de seus ingredientes evoluiu consideravelmente. Dentre os conservantes permitidos em cosméticos, destacam-se os parabenos, série homóloga do ácido 4-hidroxibenzóico e incluem os derivados metil, etil, propil e butil parabenos. Desde 1920 e até hoje, os parabenos vêm sendo utilizados para a conservação de cosméticos, alimentos e medicamentos. A larga utilização desses compostos vem ...

  7. Dielectric properties of PMMA-SiO2 hybrid films

    KAUST Repository

    Morales-Acosta, M. D.

    2010-03-01

    Organic-inorganic hybrid films were synthesized by a modified sol-gel process. PMMASiO2 films were prepared using methylmethacrylate (MMA), tetraethil-orthosilicate (TEOS) as silicon dioxide source, and 3-trimetoxi-silil-propil-methacrylate (TMSPM) as coupling agent. FTIR measurements were performed on the hybrid films to confirm the presence of PMMA-SiO2 bonding. In addition, metal-insulator-metal (MIM) devices were fabricated to study the dielectric constant of the films as function of frequency (1 KHz to 1 MHz). Electrical results show a weak trend of the dielectric constant of the hybrid films with MMA molar ratio. More importantly, the PMMA-SiO2 hybrid films showed a higher dielectric constant than SiO2 and PMMA layers, which is likely due to the presence of additional C-O-C bond. © (2010) Trans Tech Publications.

  8. Peroxymonosulfate activation and pollutants degradation over highly dispersed CuO in manganese oxide octahedral molecular sieve

    Science.gov (United States)

    Li, Jun; Ye, Peng; Fang, Jia; Wang, Manye; Wu, Deming; Xu, Aihua; Li, Xiaoxia

    2017-11-01

    Manganese oxide octahedral molecular sieves (OMS-2) supported CuO catalysts were synthesized, characterized and used in the removal of Acid Orange 7 (AO7) in aqueous solution by an oxidation process involving peroxymonosulfate (PMS). It was found that the CuO species were highly dispersed in OMS-2 with a high ratio of easily reduced surface oxygen species. The synergetic effect between CuO and OMS-2 significantly improved the dye degradation rate and catalytic stability, compared with CuO, OMS-2 and supported CuO on other materials. About 97% of the dye was removed within 15 min at neutral solution pH by using 0.2 g/L of CuO/OMS-2 and PMS. The effect of initial solution pH, PMS concentration, reaction temperature and CuO content in the composites on AO7 degradation was also investigated. Mechanism study indicated that SO4-rad radicals generated from the interaction between PMS and Mn and Cu species with different oxidation states, mainly accounted for the degradation.

  9. Machine learning of parameters for accurate semiempirical quantum chemical calculations

    International Nuclear Information System (INIS)

    Dral, Pavlo O.; Lilienfeld, O. Anatole von; Thiel, Walter

    2015-01-01

    We investigate possible improvements in the accuracy of semiempirical quantum chemistry (SQC) methods through the use of machine learning (ML) models for the parameters. For a given class of compounds, ML techniques require sufficiently large training sets to develop ML models that can be used for adapting SQC parameters to reflect changes in molecular composition and geometry. The ML-SQC approach allows the automatic tuning of SQC parameters for individual molecules, thereby improving the accuracy without deteriorating transferability to molecules with molecular descriptors very different from those in the training set. The performance of this approach is demonstrated for the semiempirical OM2 method using a set of 6095 constitutional isomers C 7 H 10 O 2 , for which accurate ab initio atomization enthalpies are available. The ML-OM2 results show improved average accuracy and a much reduced error range compared with those of standard OM2 results, with mean absolute errors in atomization enthalpies dropping from 6.3 to 1.7 kcal/mol. They are also found to be superior to the results from specific OM2 reparameterizations (rOM2) for the same set of isomers. The ML-SQC approach thus holds promise for fast and reasonably accurate high-throughput screening of materials and molecules

  10. ELABORAÇÃO DE PRODUTO CÁRNEO DE TILÁPIA COM ANTIOXIDANTES VISANDO SUA UTILIZAÇÃO COMO RECHEIO OU ACOMPANHAMENTO DA REFEIÇÃO

    Directory of Open Access Journals (Sweden)

    Gisele LAROSA

    2012-12-01

    Full Text Available O objetivo deste trabalho foi elaborar um produto cárneo para ser utilizado como recheio ou acompanhamento de refeições a partir de resíduos da filetagem de tilápia. Os resíduos (carcaça da filetagem de tilápia-do-Nilo foram compostos de espinhaça da coluna vertebral, sem cabeça, sem pele e sem vísceras, e foram fornecidos pelo frigorífico Brazilian Fish, localizado na cidade de Santa Fé do Sul – SP. Após lavagem em água e retirada do excesso de gordura, os resíduos foram passados em desossadora mecânica Brusinox® que utiliza o sistema de cinto-cilindro para a separação da carne. As carcaças foram pressionadas por um cinto de borracha contra um cilindro perfurado, obtendo-se a CMS. A matéria prima CMS (90% e aparas do corte em “v” (10% foram homogeneizadas e acrescidas de 0,2% de antioxidantes naturais (orégano, alecrim, sálvia ou moringa, foi utilizado o antioxidante sintético propil galato a 0,01% e uma parte foi elaborada sem antioxidante, para controle e armazenada por 120 dias a -18°C. O produto cárneo foi elaborado com a matéria-prima armazenada por 5 e 120 dias. Periodicamente, a cada 30 dias, foram avaliados parâmetros físicos e químicos, e os microbiológicos e sensoriais para o produto cárneo. Os diferentes antioxidantes (orégano, alecrim, sálvia, moringa, propil galato, influenciaram o índice de oxidação lipídica e os valores de pH durante o período de armazenamento da CMS + corte em “v”. Os valores de pH ficaram compreendidos entre 6,17 e 6,55 e os valores iniciais de malonaldeído foram semelhantes no início (5 dias e a matéria-prima com orégano apresentou aos 60 dias a menor oxidação (0,158 mg de MDA.kg-1, a qual foi acompanhada pela que continha sálvia (0,186 mg de MDA.kg-1. A maior oxidação, neste período, foi verifi- cada para a CMS sem antioxidante, e o alecrim e moringa foram os antioxidantes naturais menos efetivos. Aos 120 dias, a matéria-prima menos oxidada foi a

  11. PENGEMBANGAN MULTIMEDIA PEMBELAJARAN FISIKA BERBASIS AUDIO-VIDEO EKSPERIMEN LISTRIK DINAMIS DI SMP

    Directory of Open Access Journals (Sweden)

    P. Rante

    2013-10-01

    Full Text Available Penelitian pengembangan ini dilakukan dengan tujuan untuk melihat profil pengembangan multimedia pembelajaran fisika berbasis audio-video eksperimen listrik dinamis yang dapat menjadi solusi ketidakterlaksanaan praktikum di sekolah. Hasil penelitian menunjukkan bahwa propil multimedia berbasis audio-video eksperimen dari segi tampilan menarik, fasilitas runtut, sistematis dan praktis digunakan serta menjadi solusi ketidakterlaksanaan praktikum di sekolah. Produk akhir adalah sebuah paket CD autorun multimedia pembelajaran interaktif sebagai media pembelajaran mandiri dan sebagai media presentase yang dilengkapi perangkat pembelajaran untuk guru. This research aims to see the profile of multimedia learning development on physics based audio-video on the topic dynamic electricity experiment that may become a solution of practicum that not mastered well in the school. The result shows that the profile of develop multimedia based audio-video experiment has interesting display, harmonious facilities, systematic and practical in used as well as become a solution of the practicum that not mastered yet. The final product produced an auto run CD package of interactive learning multimedia as a self learning media and as a representation of media that equipped with teaching and learning media for teacher.

  12. Validación de un método analítico para la determinación cuantitativa de parabenos en el gel de hidróxido de aluminio Validation of an analytical method for the quantitative determination of parabens in aluminum hydroxide gel

    Directory of Open Access Journals (Sweden)

    Ernesto Benítez Hechavarría

    2006-08-01

    Full Text Available Se realizó la valoración prospectiva de un método desarrollado para la cuantificación de metil y de propil parabeno en el gel de hidróxido de aluminio mediante cromatografía líquida de alta resolución en fase reversa, con columna RP18 (25* 0,4 cm y detector UV-Visible a 254 nm. Se evaluaron los parámetros especificidad, linealidad, precisión, exactitud, y adecuación cromatográfica. Los resultados obtenidos mostraron que el método cumple con las especificaciones establecidas para cada parámetro evaluado, lo cual indicó que es un método rápido, seguro y confiable para la determinación cuantitativa de los parabenos en este gelThe prospective assessment of a method developed for the quantification of methyl/propyl paraben in aluminum hydroxide gel by reverse-stage high resolution liquid chromatography on RP18 column (25*0.4 cm, and with UV detector visible at 254 nm, was made. The specificity, lineality, accuracy, exactness and chromatographic adequacy were evaluated The results obtained showed that the method meets the specifications established for each evaluated parameter, which indicates that it is a rapid, safe and reliable method for the quantitative determination of the parabens in this gel

  13. Preparation and Characterization of UPR/ LNR/ Glass Fiber Composite by using Unsaturated Polyester Resin (PET) from PET Wastes

    International Nuclear Information System (INIS)

    Siti Farhana Hisham; Ishak Ahmad; Rusli Daik

    2011-01-01

    UPR/ LNR/ glass fibre composite had been prepared by using unsaturated polyester resin (UPR) based from recycled PET product. PET waste was recycled by glycolysis process and the glycides product was then reacted with maleic anhydride to produce unsaturated polyester resin. The preparation of UPR/ LNR blends were conducted by varying the amount of LNR addition to the resin ranging from 0-7.5 % (wt). The composition of UPR/LNR blend with good mechanical properties had been selected as a matrix of the glass fiber reinforced composite. Glass fibre was also treated by (3-Amino propil)triethoxysilane as a coupling agent. From the result, the addition of 2.5 % LNR in UPR had showed the optimum mechanical and morphological properties where the elastomer particle's were well dispersed in the matrix with smaller size. The silane treatment on the glass fiber increased the tensile and impact strength values of the UPR/ LNR/ GF composite compared to untreated fiber reinforcement. (author)

  14. diversité botanique dans le sud du parc national de taï, côte d

    African Journals Online (AJOL)

    AKA Boko Mathieu

    assainissement de type unitaire qui dessert environ 78 % de la population urbaine. ... Afrique SCIENCE 03(1) (2007) 123 - 145 technique de BAILENGER fortement recommandée par l'OMS [2] pour sa facilité d'exécution, son faible coût et sa fiabilité.

  15. 100G WDM Transmission over 100 meter Multimode Fiber

    DEFF Research Database (Denmark)

    Cimoli, Bruno; Estaran Tolosa, Jose Manuel; Rodes Lopez, Guillermo Arturo

    We present a comparative performance analysis for wavelength-grid selection in WDM shortrange multimode-fibers. We study 100Gbps links over OM2, OM3 and OM4 fibers and show it is feasible to reach over 100 m transmission distances....

  16. Solid electrolytes Sr(Ba)6Nb(Ta)2O11 with structural disordering of oxygen sublattice

    International Nuclear Information System (INIS)

    Nejman, A.Ya.; Podkorytov, A.L.; Yurkovskaya, N.Yu.; Zhukovskij, V.M.

    1986-01-01

    Electric conductivity at alternating and direct current and ratio of ionic component of conductivity in M 2 O-M 2 5 O 5 systems (M 2 -Sr, Ba; M 5 -Nb, Ta) are measured. High ionic conductivity of M 6 2 M 2 5 O 11 compounds is shown to be conducted by structural disordering of oxygen sublattice

  17. 6 belysninger af vejledning

    DEFF Research Database (Denmark)

    Toft, Helle Mary; Jessing, Carla Tønder; Nymann, Anette

    Artiklerne belyser vejledning af unge og vejledning af voksne. I relation til unge drejer det sig om: 1. vejledning af unge med vanskeligheder i forhold til uddannelse - her unge med særlige vejledningsbehov, og mentorordninger for unge, og 2. vejledning af unge i ungdomsuddannelser og i erhvervs...

  18. Introductie Decision Model and Notation (DMN) : Deel 1

    NARCIS (Netherlands)

    dr. Martijn Zoet; Koen Smit

    2017-01-01

    Sinds september 2015 is de ‘business rule management wereld’ / ‘decision management wereld’ weer een standaard rijker: The Decision Model and Notation (DMN). De Object Management Group (OMG) heeft deze nieuwe standaard uitgebracht met als doel een standaard taal te creëren om 1) requirements voor

  19. Introductie Decision Model and Notation (DMN) : Deel 2

    NARCIS (Netherlands)

    dr. Martijn Zoet; Koen Smit

    2017-01-01

    Sinds september 2015 is de ‘business rule management wereld’ / ‘decision management wereld’ weer een standaard rijker: The Decision Model and Notation (DMN). De Object Management Group (OMG) heeft deze nieuwe standaard uitgebracht met als doel een standaard taal te creëren om 1) requirements voor

  20. Introductie Decision Model and Notation (DMN) : Deel 3

    NARCIS (Netherlands)

    dr. Martijn Zoet; Koen Smit

    2017-01-01

    Sinds september 2015 is de ‘business rule management wereld’ / ‘decision management wereld’ weer een standaard rijker: The Decision Model and Notation (DMN). De Object Management Group (OMG) heeft deze nieuwe standaard uitgebracht met als doel een standaardtaal te creëren om 1) requirements voor

  1. Koggen und kein Ende

    DEFF Research Database (Denmark)

    Jahnke, Carsten

    2011-01-01

    Begrebet "koggen" stå i moment mere og mere i videnskabs fokus. I denne sammenhang opstod en strid om 1. hvad begrebet "koggen" egentlig betyder, om det er en byggemåde af skibene, som Paulsen og Ellmers mener, eller om det er en størelsesenhed, som forfatter postulerer. Desuden er der 2. en stor...

  2. Thermal conductivity of heterogeneous LWR MOX fuels

    Science.gov (United States)

    Staicu, D.; Barker, M.

    2013-11-01

    It is generally observed that the thermal conductivity of LWR MOX fuel is lower than that of pure UO2. For MOX, the degradation is usually only interpreted as an effect of the substitution of U atoms by Pu. This hypothesis is however in contradiction with the observations of Duriez and Philiponneau showing that the thermal conductivity of MOX is independent of the Pu content in the ranges 3-15 and 15-30 wt.% PuO2 respectively. Attributing this degradation to Pu only implies that stoichiometric heterogeneous MOX can be obtained, while we show that any heterogeneity in the plutonium distribution in the sample introduces a variation in the local stoichiometry which in turn has a strong impact on the thermal conductivity. A model quantifying this effect is obtained and a new set of experimental results for homogeneous and heterogeneous MOX fuels is presented and used to validate the proposed model. In irradiated fuels, this effect is predicted to disappear early during irradiation. The 3, 6 and 10 wt.% Pu samples have a similar thermal conductivity. Comparison of the results for this homogeneous microstructure with MIMAS (heterogeneous) fuel of the same composition showed no difference for the Pu contents of 3, 5.9, 6, 7.87 and 10 wt.%. A small increase of the thermal conductivity was obtained for 15 wt.% Pu. This increase is of about 6% when compared to the average of the values obtained for 3, 6 and 10 wt.% Pu. For comparison purposes, Duriez also measured the thermal conductivity of FBR MOX with 21.4 wt.% Pu with O/M = 1.982 and a density close to 95% TD and found a value in good agreement with the estimation obtained using the formula of Philipponneau [8] for FBR MOX, and significantly lower than his results corresponding to the range 3-15 wt.% Pu. This difference in thermal conductivity is of about 20%, i.e. higher than the measurement uncertainties.Thus, a significant difference was observed between FBR and PWR MOX fuels, but was not explained. This difference was observed for hypostoichiometric fuels, that correspond to the condition used for irradiation. However, if these two formulas are evaluated for O/M = 2.000, the difference between the predictions is negligible (Fig. 1). The difference becomes significant for non-stoichiometric fuels, as shown for O/M = 1.975 in Fig. 1. The microstructure of the FBR fuel with 21.4 wt.% Pu was not described in the paper of Duriez. Taking into account the rigorous experimental methodology used by Duriez (characterisation of the stoichiometry), a possible explanation is an interaction between the plutonium distribution and the stoichiometry. Another parameter having a strong impact on the conductivity is the porosity correction used to obtain the values for 95% TD. This correction is small in the work of Duriez as the samples density is very close to 95% TD. This was also the case for the samples selected by Philipponneau in order to obtain his recommendation. An effect due to differences in the pores shape can also be excluded, as the results are identical for stoichiometric fuels (Fig. 1). Usually the apparent stoichiometry is obtained by heat treatments and checked before and after the measurements, either by XRD or thermogravimetry. However, for non-perfectly homogeneous samples, the gradients in the plutonium distribution induce a non-uniform oxygen distribution, which is difficult to characterise experimentally. It has been proposed by Baron that the deviation from stoichiometry is the main cause for the differences observed between fresh UO2 and MOX [14,15], this effect is quantified in the next section. In the first model ("Model 1"), the effect of Pu is neglected over the entire relevant Pu compositions range (up to 24 wt.% PuO2), and a correlation obtained for non-stoichiometric homogeneous (U,Pu)O2 is used. In the second model ("Model 2", the effect of Pu is supposed to be present at all compositions, with the stoichiometry effect. The thermal conductivity is described by the correlations of Fink [16] for the UO2 matrix, Duriez at low PuO2 contents (coating phase) and of Philipponneau at high PuO2 contents (agglomerates). For the first model, applying a correlation for non-stoichiometric UO2 would be relevant, but such a correlation does not exist for physical reasons in the hypostoichiometric domain. A correlation for homogeneous (U,Pu)O2+x has to be obtained in order to predict the thermal conductivity of heterogeneous MOX fuel, supposing that the effect of Pu can be neglected, i.e. supposing that the thermal conductivities of homogeneous (U,Pu)O2 and UO2 are equal both for stoichiometric and non-stoichiometric fuels. Such a correlation has to be obtained considering reliable data for stoichiometric UO2 and stoichiometry dependence. Different correlations for non-stoichiometric fuels were reviewed [2,8,12,13,15,35,36]. The correlation of Martin [36], available for hyperstoichiometric UO2, was evaluated in the hypostoichiometric domain and the predictions were found to give a stoichiometry dependence very similar to a correlation already proposed [15]. Investigations by Molecular Dynamics [37] have confirmed the almost symmetric effect of the hypo- and hyper-stoichiometry in UO2. We therefore use the correlation of Martin, with however a correction, as for stoichiometric fuels it over predicts the conductivity of stoichiometric UO2 at high temperatures, when compared to the recommendation of Fink [16] (Fig. 4). Analysis has shown that this over-prediction was due to the high temperature term in the correlation of Martin, and that, if this term is removed, the predictions of Martin and Fink were identical for stoichiometric fuels in the temperature range 500-1500 K. The correlation proposed for homogeneous MOX is therefore given by the following equation. k=(0.035 The series and parallel bounds (Eq. (2)) were calculated using the thermal conductivity values given by Eq. (5) for the heterogeneous MOX constituents and the maximum difference between these two bounds is 2% over the considered temperature range. The predictions obtained with the equations of Maxwell-Eucken (Eq. (3)) and Bergman (Eq. (4)) are equal and are in the interval between the series and parallel bounds. This result shows that the use of a sophisticated analytical or numerical model to predict the thermal conductivity is not justified [38]. The model of Maxwell-Eucken [31] was therefore chosen to predict the equivalent thermal conductivity of the heterogeneous MOX.The equivalent thermal conductivity of the stoichiometric heterogeneous MOX with an average PuO2 content of 7.2 wt.% (constituted by a stoichiometric UO2 matrix containing 15 vol.% of (U0.76Pu0.24)O1.975 agglomerates and 55 vol.% of a coating phase of (U0.94Pu0.06)O1.995) was calculated. The results show that the apparent thermal conductivity of the heterogeneous MOX, calculated using homogeneous MOX data (Eq. (5)) with O/M = 2.000, 1.995 and 1.975 (labeled Model 1 in Fig. 4) is not significantly different from the values measured by Duriez. The latter values are also very similar to the thermal conductivity of homogeneous MOX with O/M = 1.995. This simple model shows that the stoichiometry effect is sufficient to explain the lower thermal conductivity of LWR MOX fuel as compared to UO2. The advantage of this simple model is its consistency, as the calculations for the heterogeneous MOX are based on a unique formula for non-stoichiometric homogeneous (U,Pu)O2.In the second model, the effect of the plutonium is taken into account for the coating phase and for the Pu-rich agglomerates. The thermal conductivity is described by the correlations of Fink [16] for UO2.000, of Duriez et al. [2] for (U0.94Pu0.06)O1.995 (coating phase with low PuO2 content) and of Philipponneau [8] for (U0.76Pu0.24)O1.975 (Pu-rich agglomerates with high PuO2 content). The results (labeled Model 2 in Fig. 5) show that the calculated thermal conductivity of the heterogeneous 'stoichiometric' MOX is lower than UO2 and also lower than for stoichiometric MOX as given by Duriez. Therefore taking into account both the heterogeneity in the oxygen distribution and the Pu content leads to an underprediction of the thermal conductivity of heterogeneous MOX. A possible cause for the lower thermal conductivity of unirradiated heterogeneous MOX is therefore the intrinsic fluctuations of the local stoichiometry and only to a lesser extent the perturbation of the heat transfer due to the substitution of the U by Pu atoms in the crystal lattice. This interpretation was already proposed by Baron [14,15]. This assumption is acceptable if the size of the heterogeneities is much smaller that the thickness of the sample. A theoretical criterion for the impact of these parameters, initially proposed by Kerrish [40], was checked experimentally by Lee and Taylor [41] and was found to be too restrictive. The conclusions resulting from the investigations of Lee are that for diffusivity ratios between 1 and 3.5 and volume fractions up to 30%, a ratio of 5 between the sample thickness and inclusions diameter is sufficient. Our heterogeneous samples fulfill this criterion, taking into account that the thermal diffusivity ratio is close to 1 in MOX, that the volume fraction of Pu rich agglomerates is under 30%, and that the agglomerates have a diameter of less than 200 μm compared to the sample (disc) thickness of 1 mm. The most severe requirement that one could use to define a medium behaving like a homogeneous material is that the heat transfer is not affected by the heterogeneities. This is the case for instance if we have a heterogeneous material where the two constituents have equal thermal diffusivity and no thermal resistance is present at the interfaces. This requirement is very close to be perfectly verified for the heterogeneous MOX, as UO2 and (U,Pu)O2 have very close values of the thermal diffusivity. An effect of the sample heterogeneity can also be excluded from the point of view of the location where the thermograms are recorded: the temperature transients on the rear face of the samples are measured with a pyrometer and the system is provided with a lens assembly which enables a 1 mm diameter spot of the sample surface to be focused onto the signal collecting fibre. The thermograms are therefore averaged over a 1 mm diameter surface, which is much larger than the size of the heterogeneities (Pu rich agglomerates with a size of less than 200 μm).The impact of sample thickness on the measured thermal diffusivity was experimentally investigated for the MIMAS MOX with 7.0 wt.% Pu. For this purpose, discs of 0.5, 1, 2, and 3 mm thickness were cut and the thermal diffusivity was measured. The same investigation was done for standard UO2, in order to verify the accuracy of the inverse technique used for the identification of the thermal diffusivity from the thermograms. The inverse technique [39] explicitly takes into account the sample thickness in the calculation of the heat losses. The results for UO2 (Fig. 6) show that the measured thermal diffusivity does not depend on sample thickness, and is in good agreement with the recommendation of Fink [16]. The results for the heterogeneous MOX (Fig. 7) also show no dependence on sample thickness.

  3. Octahedral magnesium manganese oxide molecular sieves as the cathode material of aqueous rechargeable magnesium-ion battery

    International Nuclear Information System (INIS)

    Zhang, Hongyu; Ye, Ke; Shao, Shuangxi; Wang, Xin; Cheng, Kui; Xiao, Xue; Wang, Guiling; Cao, Dianxue

    2017-01-01

    Highlights: • The mico-sheet Mg-OMS-1 is synthesized by a simple hydrothermal method. • The mechanism of Mg 2+ insertion/deinsertion from Mg-OMS-1 is explored. • The electrode exhibits a good electrochemical performance in MgCl 2 electrolyte. - Abstract: Aqueous magnesium-ion batteries have shown the desired properties of high safety characteristics, similar electrochemical properties to lithium and low cost for energy storage applications. The micro-sheet morphology of todorokite-type magnesium manganese oxide molecular sieve (Mg-OMS-1) material, which applies as a novel cathode material for magnesium-ion battery, is obtained by the simple hydrothermal method. The structure and morphology of the particles are confirmed by X-ray power diffraction, X-ray photoelectron spectroscopy, inductively coupled plasma, scanning and transmission electron microscopy. The electrochemical performance of Mg-OMS-1 is researched by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and constant current charge-discharge measurement. Mg-OMS-1 shows a good battery behavior for Mg 2+ insertion and deinsertion in the aqueous electrolyte. When discharging at 10 mA g −1 in 0.2 mol dm −3 MgCl 2 aqueous electrolyte, the initial discharge capacity reaches 300 mAh g −1 . The specific capacity retention rate is 83.7% after cycling 300 times at 100 mA g −1 in 0.5 mol dm −3 MgCl 2 electrolyte with a columbic efficiency of nearly 100%.

  4. Band-engineering of TiO2 as a wide-band gap semiconductor using organic chromophore dyes

    Science.gov (United States)

    Wahyuningsih, S.; Kartini, I.; Ramelan, A. H.; Saputri, L. N. M. Z.; Munawaroh, H.

    2017-07-01

    Bond-engineering as applied to semiconductor materials refers to the manipulation of the energy bands in order to control charge transfer processes in a device. When the device in question is a photoelectrochemical cell, the charges affected by drift become the focus of the study. The ideal band gap of semiconductors for enhancement of photocatalyst activity can be lowered to match with visible light absorption and the location of conduction Band (CB) should be raised to meet the reducing capacity. Otherwise, by the addition of the chromofor organic dyes, the wide-band gab can be influences by interacation resulting between TiO2 surface and the dyes. We have done the impruvisation wide-band gap of TiO2 by the addition of organic chromophore dye, and the addition of transition metal dopand. The TiO2 morphology influence the light absorption as well as the surface modification. The organic chromophore dye was syntesized by formation complexes compound of Co(PAR)(SiPA)(PAR)= 4-(2-piridylazoresorcinol), SiPA = Silyl propil amine). The result showed that the chromophore groups adsorbed onto TiO2 surface can increase the visible light absorption of wide-band gab semiconductor. Initial absorption of a chromophore will affect light penetration into the material surfaces. The use of photonic material as a solar cell shows this phenomenon clearly from the IPCE (incident photon to current conversion efficiency) measurement data. Organic chromophore dyes of Co(PAR)(SiPA) exhibited the long wavelength absorption character compared to the N719 dye (from Dyesol).

  5. Luminescent hybrid materials functionalized with lanthanide ethylenodiaminotetraacetate complexes containing β-diketonate as antenna ligands

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Franklin P.; Costa, Israel F.; Espínola, José Geraldo P.; Faustino, Wagner M.; Moura, Jandeilson L. [Departamento de Química-Universidade Federal da Paraíba, 58051-970 João Pessoa, PB (Brazil); Brito, Hermi F.; Paolini, Tiago B. [Departamento de Química Fundamental-Instituto de Química da Universidade de São Paulo, 05508-900 São Paulo, SP (Brazil); Felinto, Maria Cláudia F.C. [Instituto de Pesquisas energéticas e Nucleares-IPEN, 05508-900 São Paulo, SP (Brazil); Teotonio, Ercules E.S., E-mail: teotonioees@quimica.ufpb.br [Departamento de Química-Universidade Federal da Paraíba, 58051-970 João Pessoa, PB (Brazil)

    2016-02-15

    Three organic–inorganic hybrid materials based on silica gel functionalized with (3-aminopropyl)trimethoxysilane (APTS), [3-(2-aminoetilamino)-propil]-trimetoxissilano (DAPTS) and 3-[2-(2-aminoetilamino)etilamino] propiltrimetoxysilane (TAPTS) and subsequently modified with EDTA derivative were prepared by nonhomogeneous route and were then characterized. The resulting materials named SilXN-EDTA (X=1 for APTS, 2 for DAPTS and 3 for TAPTS) were used to obtain new lanthanide Ln{sup 3+}-β-diketonate (Ln{sup 3+}=Eu{sup 3+}, Gd{sup 3+} and Tb{sup 3+}) complexes covalently linked to the functionalized silica gel surfaces (named SilXN-EDTALn-dik, dik=tta, dbm, bzac and acac). The photophysical properties of the new luminescent materials were investigated and compared with those with similar system presenting water molecules coordinated to the lanthanide ions, SilXN-EDTALn-H{sub 2}O. The SilXN-EDTAEu-dik and SilXN-EDTATb-dik systems displayed characteristic red and green luminescence when excited by UV radiation. Furthermore, the quantitative results showed that the emission quantum efficiency (η), experimental intensity parameters Ω{sub 2} and Ω{sub 4}, and Einstein's emission coefficient (A{sub 0J}) of the SilXN-EDTAEu-dik materials were largely dependent on the ligands. Based on the luminescence data, the most efficient intramolecular energy transfer processes were found to the SilXN-EDTAEu-dik (dik: tta and dbm) and SilXN-EDTATb-acac materials, which exhibited more pure emission colors. These materials are promising red and green phosphors, respectively. - Highlights: • New highly luminescent hybrid materials containing lanthanide-EDTA complexes. • The effect of three silylanting agent on the adsorption and luminescent properties has been studied. • The luminescence sensitizing by different β-diketonate ligands have been investigated.

  6. Method for removing soot from exhaust gases

    Science.gov (United States)

    Suib, Steven L.; Dharmarathna, D. A. Saminda; Pahalagedara, Lakshitha R.

    2018-01-16

    A method for oxidizing soot from diesel exhaust gas from a diesel engine. The method involves providing a diesel particulate filter for receiving the diesel exhaust gas; coating a catalyst composition on the diesel particulate filter; and contacting the soot from the diesel exhaust gas with the catalyst coated diesel particulate filter at a temperature sufficient to oxidize the soot to carbon dioxide. The catalyst composition is a doped or undoped manganese oxide octahedral molecular sieve (OMS-2) material. A diesel exhaust gas treatment system that includes a diesel particulate filter for receiving diesel exhaust gas from a diesel engine and collecting soot; and a catalyst composition coated on the diesel particulate filter. The catalyst composition is a doped or undoped manganese oxide octahedral molecular sieve (OMS-2).

  7. Planning of Combat Operations and Command of Troops with the Aid of Network Graphs,

    Science.gov (United States)

    1985-01-14

    84033705 PAGE Bew€. e oemuse, 3. 3II. M 0o 5) 1e. cr Porn ..V . o.m 2ujrnP Vflp dot, CrnPcJ1. 816. crnP 21 .(6 6 1 7 to0 flpopepmo Imp "+ Fig. 55...following reference number 2 to first order event and we write/record with its arabic numeral inside the circle, which indicates first order event. We

  8. Synthesis of single crystal manganese oxide octahedral molecular sieve (OMS) nanostructures with tunable tunnels and shapes.

    Science.gov (United States)

    Li, Wei-Na; Yuan, Jikang; Gomez-Mower, Sinue; Sithambaram, Shantakumar; Suib, Steven L

    2006-02-23

    A new and facile route is reported to manipulate the self-assembly synthesis of hierarchically ordered Rb-OMS-2 and pyrolusite with an interesting flowerlike morphology by a direct and mild reaction between rubidium chromateand manganese sulfate without any organic templates. The crystal forms, morphologies, and tunnel sizes of the obtained OMS materials can be controlled. A mechanism for the growth of manganese dioxides with flowerlike architectures was proposed. The obtained products exhibit potential for use in catalysis and other applications.

  9. Isospin Mass Splittings and the $\\ms$ Corrections in the Semibosonized SU(3)-NJL-Model

    OpenAIRE

    Blotz, Andree; Goeke, K.; Praszalowicz, M.

    1994-01-01

    The mass splittings of hyperons including the isospin splittings are calculated with $O(\\ms^2)$ and $O(\\ms \\dm)$ accuracy respectively within the semibosonized SU(3)-NJL model. The pattern of the isospin splittings is not spoiled by the terms of the order $O(\\ms \\dm)$, and both splittings between the different isospin multiplets and within the same multiplet are well reproduced for acceptable values of $\\ms$ and $\\dm$.

  10. An update to inplace testing of safety/relief valves utilizing lift assist technology

    International Nuclear Information System (INIS)

    Heorman, K.R.

    1992-01-01

    Inplace testing of safety and relief valves with lift-assist devices has received mixed reviews from nuclear power plant testing personnel. While many plants use the technology, most limit its use to testing main steam safety valves (even though both OM-1-1981 and PTC 25.3-1976 allow its use for several different service applications). Test coordinator concerns regarding the technology range from lift set point accuracy and repeatability to the quality of the test result output. In addition, OM-1-1981 and PTC 25.3-1976 differ in their approach to the technology. The reasons for the differences between PTC 25.3-1976 and OM-1-1981 are discussed along with additional considerations applicable to the use of the technology in testing liquid service valves. This paper shows that lift assist technology is capable of determining lift set points within the accuracy requirements of OM-1 and PTC 25.3. It also demonstrates that the technology should not be limited to compressible service systems. Also, improvements in test repeatability and output quality are discussed as a function of the assist device design used and valve characteristics. Lift assist testing is often preferred over inplace testing that uses direct system pressure. It is often more cost efficient than bench testing because it does not require removal of critical systems from service and transportation of components. Also, duplicating system temperatures and other environmental factors is not an issue during inplace testing. Valve testing that once required an outage and maintenance period can now be conducted prior to such periods. This approach minimizes the possibility of failures becoming critical path limiting items

  11. Seven steps to language

    DEFF Research Database (Denmark)

    Widell, Peter

    2015-01-01

    Artiklen er et bidrag til en begrebsanalyse af, hvilke forudsætninger der indgår i det at kunne et sprog. Undersøgelsen kan ses som et filosofisk bidrag til såvel sprogets fylogenese som dets ontogenese. At kunne et sprog kræver at man har et begreb om handlen i verden generelt, om (1) handlingsk...

  12. Lightning-Generated NO(x) Seen By OMI during NASA's TC-4 Experiment: First Results

    Science.gov (United States)

    Bucsela, Eric; Pickering, Kenneth E.; Huntemann, Tabitha; Cohen, Ronald; Perring, Anne; Gleason, James; Blakeslee, Richard; Navarro, Dylana Vargas; Segura, Ileana Mora; Hernandez, Alexia Pacheco; hide

    2009-01-01

    We present here case studies identifying upper-tropospheric NO2 produced in convective storms during NASA's Tropical Composition, Cloud and Climate Coupling Experiment (TCi)n July and August 2007. DC8 aircraft missions, flown from the mission base in Costa Rica, recorded in situ NO2 profiles near active storms and in relatively quiet areas. We combine these data with measurements from the Ozone Monitoring Instrument (OMI) on the Aura satellite to estimate the amount of NO2 produced by lightning (LN02) above background levels in the regions influenced by storms. In our analysis, improved off-line processing techniques are employed to minimize known artifacts in the OM1 data. Information on lightning flashes (primarily CG) observed by the surface network operated by the Instituto Costarricense de Electricidad are examined upwind of regions where OM1 indicates enhanced LNO2. Comparisons of the observed flash data with measurements by the TRMM/LIS satellite instrument are used to obtain the lightning detection efficiency for total flashes. Finally, using the NO/NO2 ratio estimated from DC-8 observations, we estimate the average NO(x) production per lightning flash for each case in this study. The magnitudes of the measured NO(x) enhancements are compared with those observed by the DC-8 and with similar OM1 measurements analyzed in mid-latitude experiments.

  13. Xenotransplantation elicits salient tumorigenicity of adult T-cell leukemia-derived cells via aberrant AKT activation.

    Science.gov (United States)

    Yamaguchi, Kazunori; Takanashi, Tomoka; Nasu, Kentaro; Tamai, Keiichi; Mochizuki, Mai; Satoh, Ikuro; Ine, Shoji; Sasaki, Osamu; Satoh, Kennichi; Tanaka, Nobuyuki; Harigae, Hideo; Sugamura, Kazuo

    2016-05-01

    The transplantation of human cancer cells into immunodeficient NOD/SCID/IL-2Rγc(null) (NOG) mice often causes highly malignant cell populations like cancer stem cells to emerge. Here, by serial transplantation in NOG mice, we established two highly tumorigenic adult T-cell leukemia-derived cell lines, ST1-N6 and TL-Om1-N8. When transplanted s.c., these cells formed tumors significantly earlier and from fewer initial cells than their parental lines ST1 and TL-Om1. We found that protein kinase B (AKT) signaling was upregulated in ST1-N6 and TL-Om1-N8 cells, and that this upregulation was due to the decreased expression of a negative regulator, INPP5D. Furthermore, the introduction of a constitutively active AKT mutant expression vector into ST1 cells augmented the tumorigenicity of the cells, whereas treatment with the AKT inhibitor MK-2206 attenuated the progression of tumors induced by ST1-N6 cells. Collectively, our results reveal that the AKT signaling pathway plays a critical role in the malignancy of adult T-cell leukemia-derived cells. © 2016 The Authors. Cancer Science published by John Wiley & Sons Australia, Ltd on behalf of Japanese Cancer Association.

  14. Hydrogen bonds in concreto and in computro: the sequel

    Science.gov (United States)

    Stouten, Pieter F. W.; Van Eijck, Bouke P.; Kroon, Jan

    1991-02-01

    In the framework of our comparative research concerning hydrogen bonding in the crystalline and liquid phases we have carried out molecular dynamics (MD) simulations of liquid methanol. Six different rigid three site models are compared. Five of them had been reported in the literature and one (OM2) we developed by a fit to the experimental molar volume, heat of vaporization and neutron weighted radial distribution function. In general the agreement with experiment is satisfactory for the different models. None of the models has an explicit hydrogen bond potential, but five of the six models show a degree of hydrogen bonding comparable to experiments on liquid methanol. The analysis of the simulation hydrogen bonds indicates that there is a distinct preference of the O⋯O axis to lie in the acceptor lone pairs plane, but hardly any for the lone pair directions. Ab initio calculations and crystal structure statistics of OH⋯O hydrogen bonds agree with this observation. The O⋯O hydrogen bond length distributions are similar for most models. The crystal structures show a sharper O⋯O distribution. Explicit introduction of harmonic motion with a quite realistic root mean square amplitude of 0.08 Å to the thermally averaged crystal distribution results in a distribution comparable to OM2 although the maximum of the former is found at shorter distance. On the basis of the analysis of the static properties of all models we conclude that our OM2, Jorgenson's OPLS and Haughney, Ferrario and McDonald's HFM1 models are good candidates for simulations of liquid methanol under isothermal, isochoric conditions. Partly flexible and completely rigid OM2 are simulated at constant pressure and with fixed volume. The flexible simulations give essentially the same (correct) results under both conditions, which is not surprising because the flexible form was fitted under both conditions. Rigid OM2 has a similar potential energy but larger pressure in the

  15. A clone-free, single molecule map of the domestic cow (Bos taurus) genome.

    Science.gov (United States)

    Zhou, Shiguo; Goldstein, Steve; Place, Michael; Bechner, Michael; Patino, Diego; Potamousis, Konstantinos; Ravindran, Prabu; Pape, Louise; Rincon, Gonzalo; Hernandez-Ortiz, Juan; Medrano, Juan F; Schwartz, David C

    2015-08-28

    The cattle (Bos taurus) genome was originally selected for sequencing due to its economic importance and unique biology as a model organism for understanding other ruminants, or mammals. Currently, there are two cattle genome sequence assemblies (UMD3.1 and Btau4.6) from groups using dissimilar assembly algorithms, which were complemented by genetic and physical map resources. However, past comparisons between these assemblies revealed substantial differences. Consequently, such discordances have engendered ambiguities when using reference sequence data, impacting genomic studies in cattle and motivating construction of a new optical map resource--BtOM1.0--to guide comparisons and improvements to the current sequence builds. Accordingly, our comprehensive comparisons of BtOM1.0 against the UMD3.1 and Btau4.6 sequence builds tabulate large-to-immediate scale discordances requiring mediation. The optical map, BtOM1.0, spanning the B. taurus genome (Hereford breed, L1 Dominette 01449) was assembled from an optical map dataset consisting of 2,973,315 (439 X; raw dataset size before assembly) single molecule optical maps (Rmaps; 1 Rmap = 1 restriction mapped DNA molecule) generated by the Optical Mapping System. The BamHI map spans 2,575.30 Mb and comprises 78 optical contigs assembled by a combination of iterative (using the reference sequence: UMD3.1) and de novo assembly techniques. BtOM1.0 is a high-resolution physical map featuring an average restriction fragment size of 8.91 Kb. Comparisons of BtOM1.0 vs. UMD3.1, or Btau4.6, revealed that Btau4.6 presented far more discordances (7,463) vs. UMD3.1 (4,754). Overall, we found that Btau4.6 presented almost double the number of discordances than UMD3.1 across most of the 6 categories of sequence vs. map discrepancies, which are: COMPLEX (misassembly), DELs (extraneous sequences), INSs (missing sequences), ITs (Inverted/Translocated sequences), ECs (extra restriction cuts) and MCs (missing restriction cuts

  16. Intoxicação experimental por cebola, Allium cepa (Liliaceae, em gatos Experimental onion Allium cepa (Liliaceae poisoning in cats

    Directory of Open Access Journals (Sweden)

    Rafael A. Fighera

    2002-04-01

    Full Text Available A intoxicação por cebola é relatada em várias espécies animais em muitas partes do mundo. O princípio tóxico (n-propil dissulfito presente na cebola causa a transformação da hemoglobina em metemoglobina. Para estudar os achados laboratoriais, de necropsia e histopatológicos da intoxicação por cebola em gatos, cinco gatos de quatro meses de idade receberam cada um uma dose única de 10g/kg de cebola desidratada por via oral. Um outro gato de mesma idade não recebeu a refeição com cebola e serviu como controle. Todos os cinco gatos desenvolveram sinais clínicos da toxicose; um deles morreu dentro de 24 horas após a ingestão da cebola. Os sinais clínicos incluíram apatia, taquicardia, taquipnéia e cianose. Os achados laboratoriais se caracterizavam por anemia hemolítica associada a corpúsculos de Heinz e metemoglobinemia. Os principais achados de necropsia foram esplenomegalia e sangue de cor marrom. Os achados histopatológicos foram hemossiderose e hematopoese extramedular no baço e fígado.Onion poisoning is reported worlwide in several animal species. The toxic principle (n-propyl dissulfide present in onions causes the transformation of hemoglobin in methemoglobin. In order to study the laboratory, gross and histopathological findings in onion poisoning in cats, five 4-month-old cats were fed a single dose of 10g/kg of dried-onion each. Another cat of the same age did not receive the onion meal and served as control. All five cats developed clinical signs of the toxicosis; one of them died within 24 hours of the ingestion of the onion meal. Clinical signs included apathy, tachycardia, tachypnea, and cyanosis. Laboratory findings included hemolytic anemia associated with Heinz bodies and methemoglobinemia. Main necropsy findings were splenomegaly and brown discoloration of blood. Histopathological findings included splenic and hepatic hemosiderosis and multifocal extramedullary hematopoiesis.

  17. FONTES E APLICAÇÕES DE TANINOS E TANASES EM ALIMENTOS SOURCE AND APPLICATION OF TANNIN AND TANNASE IN FOODS.

    Directory of Open Access Journals (Sweden)

    V. BATTESTIN

    2008-08-01

    Full Text Available

    Os taninos ocorrem em uma ampla variedade de vegetais, são classificados em hidrolisáveis e condensados. O ácido tânico é um tanino hidrolisável, que é quebrado por enzimas. São utilizados para estabilização da cerveja, curtimento de pele e produção de resinas. Atualmente, são empregados em processos biotecnológicos para produção de enzimas como a tanase, que hidrolisa ésteres e ligações laterais de taninos hidrolisáveis produzindo ácido gálico e glicose. A maior aplicação desta enzima tem sido para produção de ácido gálico, que é utilizado na produção de trimetropim e sínteses de ésteres como propil galato, usado como antioxidante na indústria de alimentos. A enzima também é aplicada no processamento de cerveja e clarificação de sucos, processamento de chás instantâneos e tratamento de efluentes contaminados com compostos fenólicos. Tannins occur in an ample variety of vegetables and are classified in condensed and hydrolysable tannins. The tannic acid is a hydrolysable tannin that is broken by enzymes. Tannins are used for stabilization of the beer and resin production. Currently, they are used in biotechnological processes for enzyme production as tannase which hydrolyses ester and depside bonds of hydrolysable tannins releasing gallic acid and glucose. The major applications of this enzyme are in the production of gallic acid, which is used for the manufacture of an trimethoprim and synthesis of esters, such as propyl gallate, used as antioxidants in the food industry. The enzyme also has its applications in the production of beer and juices as a clarifier, in the manufacture of instant tea, and the treatment of wastewater contaminated with polyphenolic compounds.

  18. Dispersões aquosas poliuretânicas à base de polibutadieno hidroxilado: influência das variáveis reacionais Development of polyurethane aqueous dispersions based on hydroxy-terminated polybutadiene: reaction variables

    Directory of Open Access Journals (Sweden)

    Lúcio C. de Magalhães

    2007-09-01

    Full Text Available Neste trabalho foram produzidas dispersões aquosas poliuretânicas com formulações variadas, em ausência de solvente orgânico. Nas sínteses, foram empregados o diisocianato de isoforona (IPDI e como polióis, o poli(glicol propilênico (PPG e diferentes tipos de polibutadieno líquido hidroxilado (HTPB comerciais. Para promover a dispersão das cadeias poliméricas em água, foi utilizado o ácido dimetilolpropiônico (DMPA, que após neutralização com trietilamina (TEA forneceu os sítios iônicos responsáveis pela estabilidade das partículas dispersas no meio aquoso. Como extensor de cadeia foi utilizada a hidrazina (HYD. As dispersões aquosas poliuretânicas obtidas foram avaliadas quanto ao teor de sólidos totais, tamanho médio de partícula e viscosidade aparente. Não foram observadas variações significativas nesses valores, que ficaram em faixas pequenas, independentemente da formulação. Os filmes formados a partir dessas dispersões foram avaliados quanto às suas características visuais, adesão e propriedades mecânicas. Os filmes apresentaram boa aderência a superfícies de alumínio, transparência e flexibilidade e aqueles produzidos com baixos teores de DMPA e/ou baixa razão NCO/OH apresentaram melhores propriedades mecânicas.In this work, polyurethane aqueous dispersions with different formulations were produced in the absence of organic solvents. In the synthesis, isophorone diisocyanate (IPDI, poly(propylene glycol (PPG and different types of hydroxy-terminated polybutadiene (HTPB were employed. In order to make possible the dispersion of the polyurethane chains in water, dimethylolpropionic acid (DMPA, was used. Afterwards the acid groups were neutralized with triethylamine (TEA to provide the ionic groups responsible for the particles stability in water. The solids content, viscosity and particle size of the formulations produced in this work were evaluated. These parameters were found to vary within a

  19. Uso de sílica e sílica-titânia organofuncionalizadas para a remoção de Cu(II em aguardentes The use of organofuncionalized silica and silica-titania for Cu (II removal in spirits

    Directory of Open Access Journals (Sweden)

    Leonardo B. Cantanhede

    2005-09-01

    Full Text Available Devido a necessidade da presença de cobre nos alambiques e as exigências cada vez mais acirradas com relação ao seu teor no destilado, é de interesse o desenvolvimento de metodologias para o controle deste metal nos destilados e/ou a sua remoção até níveis aceitáveis, em conformidade com as legislações nacional e internacional. Este trabalho investigou a potencialidade de dois sólidos: sílica modificada com trimetóxisili(propiletilenodiamina (Si-Dia, e sílica-titânia, também modificada com trimetóxisili(propiletilenodiamina (Si-Ti-Dia, como agentes removedores de íons Cu2+. Foram empregadas tanto soluções padrão de Cu2+, com teor alcoólico que simulavam aguardentes, como amostras reais de destilados. Os resultados indicam que um grama das matrizes Si-Dia e Si-Ti-Dia adsorvem 1,39 e 73,5mmol de Cu2+, respectivamente, a partir das soluções padrão, nas seguintes condições: tempo de contato 22h, pH 4,0; temperatura 25 ± 1,0°C e agitação constante. Para amostras reais, sob as mesmas condições de análises, o sólido Si-Dia reduziu as concentrações dos íons divalentes Cu, Zn e Fe em, respectivamente, 82, 83 e 64%, enquanto o Si-Ti-Dia, reduziu os mesmos íons em 88, 31 e 22%, respectivamente.The high levels of copper in Brazilian spirits is a problem of prominent importance, taking into account the relevance of this metal. This work investigates the efficiency of two solids: silica organofunctionalized with thimethoxysil(propil ethylenediamine (Si-Dia and silica-titania modified with the same organofunctionaling agent (Si-Ti-Dia as copper sequestrating agents in a Brazilian spirit obtained from sugar cane. It was verified that the matrices Si-Dia and Si-Ti-Dia are very good sequiestrating agents, reducing the concentrations of Cu, Zn and Fe in the studied spirit sample in 82, 83 and 64% and 88, 31 and 22%, respectively at 25 ± 1.0°C and pH 4.0.

  20. Anxiolytic effects of orcinol glucoside and orcinol monohydrate in mice.

    Science.gov (United States)

    Wang, Xiaohong; Li, Guiyun; Li, Peng; Huang, Linyuan; Huang, Jianmei; Zhai, Haifeng

    2015-06-01

    Anxiety is a common psychological disorder, often occurring in combination with depression, but therapeutic drugs with high efficacy and safety are lacking. Orcinol glucoside (OG) was recently found to have an antidepressive action. To study the therapeutic potential of OG and orcinol monohydrate (OM) as anxiolytic agents. Anxiolytic effects in mice were measured using the elevated plus-maze, hole-board, and open-field tests. Eight groups of mice were included in each test. Thirty minutes before each test, mice in each group received one oral administration of OG (5, 10, or 20 mg/kg), OM (2.5, 5, or 10 mg/kg), the positive control diazepam (1 or 5 mg/kg), or control vehicle. Each mouse underwent only one test. Uptake of orcinol (5 mg/kg) in the brain was qualitatively detected using the HPLC-MS method. OG (5, 10, and 20 mg/kg) and OM (2.5 and 5 mg/kg) increased the time spent in open arms and the number of entries into open arms in the elevated plus-maze test. OG (5 and 10 mg/kg) and OM (2.5 and 5 mg/kg) increased the number of head-dips in the hole-board test. At all tested doses, OG and OM did not significantly affect the locomotion of mice in the open-field test. Orcinol could be detected in the mouse brain homogenates 30 min after oral OM administration, having confirmed that OM is centrally active. The results demonstrated that OG and OM are anxiolytic agents without sedative effects, indicating their therapeutic potential for anxiety.

  1. Nitrous oxide exchanges with the atmosphere of a constructed wetland treating wastewater. Parameters and implications for emission factors

    International Nuclear Information System (INIS)

    Johansson, A.E.; Svenssom, B.H.; Kasimir Klemedtsson, Aa.; Klemedtsson, L.

    2003-01-01

    Static chamber measurements of N 2 O fluxes were taken during the 1998 and 1999 growth seasons in a Swedish constructed wetland receiving wastewater. The dominating plant species in different parts of the wetland were Lemna minor L., Typha latifolia L., Spirogyra sp. and Glyceria maxima (Hartm.) and Phalaris arundinacea (L.), respectively. There were large temporal and spatial variations in N 2 O fluxes, which ranged from consumption at -350 to emissions at 1791 μg N 2 O/m 2 /h. The largest positive flux occurred in October 1999 and the lowest in the middle of July 1999. The average N 2 O flux for the two years was 130 μg N 2 O/m 2 /h (SD = 220). No significant differences in N 2 O fluxes were found between the years, even though the two growing seasons differed considerably with respect to both air temperature and precipitation. 15% of the fluxes were negative, showing a consumption of N 2 O. Consumption occurred on a few occasions at most measurement sites and ranged from 1 - 350 μg N 2 O/m 2 /h. 13 - 43% of the variation in N 2 O fluxes was explained by multiple linear regression analysis including principal components. Emission factors were calculated according to IPCC methods from the N 2 O fluxes in the constructed wetland. The calculated emission factors were always lower (0.02 - 0.27%) compared to the default factor provided by the IPCC (0.75%). Thus, direct application of the IPCC default factor may lead to overestimation of N 2 O fluxes from constructed wastewater-treating wetlands

  2. The Gas-Surface Interaction of a Human-Occupied Spacecraft with a Near-Earth Object

    Science.gov (United States)

    Farrell, W. M.; Hurley, D. M.; Poston, M. J.; Zimmerman, M. I.; Orlando, T. M.; Hibbitts, C. A.; Killen, R. M.

    2016-01-01

    NASA's asteroid redirect mission (ARM) will feature an encounter of the human-occupied Orion spacecraft with a portion of a near- Earth asteroid (NEA) previously placed in orbit about the Moon by a capture spacecraft. Applying a shuttle analog, we suggest that the Orion spacecraft should have a dominant local water exosphere, and that molecules from this exosphere can adsorb onto the NEA. The amount of adsorbed water is a function of the defect content of the NEA surface, with retention of shuttle-like water levels on the asteroid at 10(exp 15) H2O's/m2 for space weathered regolith at T approximately 300 K.

  3. A polynomial time algorithm for solving the maximum flow problem in directed networks

    International Nuclear Information System (INIS)

    Tlas, M.

    2015-01-01

    An efficient polynomial time algorithm for solving maximum flow problems has been proposed in this paper. The algorithm is basically based on the binary representation of capacities; it solves the maximum flow problem as a sequence of O(m) shortest path problems on residual networks with nodes and m arcs. It runs in O(m"2r) time, where is the smallest integer greater than or equal to log B , and B is the largest arc capacity of the network. A numerical example has been illustrated using this proposed algorithm.(author)

  4. Regional nitrous oxide flux in Amazon basin

    International Nuclear Information System (INIS)

    Felippe, Monica Tais Siqueira D'Amelio

    2010-01-01

    Nitrous oxide (N 2 O) is the third most important anthropogenic greenhouse gas. Globally, the main sources of N 2 O are nitrification and denitrification in soils. About two thirds of the soil emissions occur in the tropics and approximately 20% originate in wet rain forest ecosystems, like the Amazon forest. The work presented here involves aircraft vertical profiles of N 2 O from the surface to 4 km over two sites in the Eastern and Central Amazon: Tapajos National Forest (2000-2009) and Cuieiras Biologic Reserve (2004-2007), and the estimation of N 2 O fluxes for regions upwind of these sites using two methods: Column Integration Technique and Inversion Model - FLEXPART. To our knowledge, these regional scale N 2 O measurements in Amazonia are unique and represent a new approach to looking regional scale emissions. For the both methods, the fluxes upwind of Cuieiras Biologic Reserve exhibited little seasonality, and the annual mean was 1.9 ±1.6 mgN 2 Om -2 day -1 for the Column Integration Technique and 2.3±0.9 mgN 2 Om -2 day -1 for Inversion Model - FLEXPART. For fluxes upwind of Tapajos Nacional Forest, the Inversion Model - FLEXPART presented about half (0.9±1.7 mgN 2 Om -2 day -1 ) of the Column Integration Technique (2.0±1.1 mgN 2 Om -2 day -1 ) for the same period (2004-2008). One reason could be because the inversion model does not consider anthropic activities, once it had a good representation for less impacted area. Both regions presented similar emission during wet season. By Column Integration Technique, fluxes upwind Tapajos Nacional Forest were similar for dry and wet seasons. The dry season N 2 O fluxes exhibit significant correlations with CO fluxes, indicating a larger than expected source of N 2 O from biomass burning. The average CO:N 2 O ratio for all 38 profiles sampled during the dry season was 82±69 mol CO:molN 2 O and suggests a larger biomass burning contribution to the global N 2 O budget than previously reported. (author)

  5. Extended visual regions among the deaf; L`extension des aires visuelles chez les sourds

    Energy Technology Data Exchange (ETDEWEB)

    Neville, H. [Oregon Univ., Eugene, OR (United States); Bavelier, D. [Georgetown Univ., Washington, DC (United States)

    1996-07-01

    Whatever is the source of the deafness (genetic or acquired in the childhood) it leads to a partial re-arrangement of brain. It has been shown at animals that nerve cells of the auditive cortex acquire some characteristics of the visual nerve cells. At men, the NMR imaging confirms it: it seems that a part of the visual cortex appropriates some cortex zones which are normally intended to audition. It has been verified too that the deaf language solicit more the right hemisphere than the spoken language. (O.M.). 2 refs.

  6. Effect of axillary blockade on regional cerebral blood flow during static handgrip

    DEFF Research Database (Denmark)

    Friedman, D B; Friberg, L; Mitchell, J H

    1991-01-01

    Regional cerebral blood flow (rCBF) was determined at rest and during static handgrip before and after regional blockade with lidocaine. A fast rotating single photon emission computer tomograph system with 133Xe inhalation was used at orbitomeatal plane (OM) +2.5 and +6.5 cm in eight subjects. M...... static handgrip, there was no increase in rCBF after partial sensory and motor blockade. Thus bilateral activation occurs in the premotor and motor sensory cortex during static handgrip, and this activation requires neural feedback from the contracting muscles....

  7. Determination of average molecular weights on organic reactor coolants. I.- Freezing-point depression method for benzene solutions; Determinaciond e masas moleculares medias en refrigerantes nucleares organicos. I.- Crioscopia de disolucion bencenicas

    Energy Technology Data Exchange (ETDEWEB)

    Carreira, M

    1965-07-01

    As a working method for determination of changes in molecular mass that may occur by irradiation (pyrolytic-radiolytic decomposition) of polyphenyl reactor coolants, a cryoscopic technique has been developed which associated the basic simplicity of Beckman's method with some experimental refinements taken out of the equilibrium methods. A total of 18 runs were made on samples of napthalene, biphenyl, and the commercial mixtures OM-2 (Progil) and Santowax-R (Monsanto), with an average deviation from the theoretical molecular mass of 0.6%. (Author) 7 refs.

  8. Determination of average molecular weights on organic reactor coolants. I.- Freezing-point depression method for benzene solutions

    International Nuclear Information System (INIS)

    Carreira, M.

    1965-01-01

    As a working method for determination of changes in molecular mass that may occur by irradiation (pyrolytic-radiolytic decomposition) of polyphenyl reactor coolants, a cryoscopic technique has been developed which associated the basic simplicity of Beckman's method with some experimental refinements taken out of the equilibrium methods. A total of 18 runs were made on samples of napthalene, biphenyl, and the commercial mixtures OM-2 (Progil) and Santowax-R (Monsanto), with an average deviation from the theoretical molecular mass of 0.6%. (Author) 7 refs

  9. Determination of average molecular weights on organic reactor coolants. I.- Freezing-point depression method for benzene solutions; Determinaciond e masas moleculares medias en refrigerantes nucleares organicos. I.- Crioscopia de disolucion bencenicas

    Energy Technology Data Exchange (ETDEWEB)

    Carreira, M.

    1965-07-01

    As a working method for determination of changes in molecular mass that may occur by irradiation (pyrolytic-radiolytic decomposition) of polyphenyl reactor coolants, a cryoscopic technique has been developed which associated the basic simplicity of Beckman's method with some experimental refinements taken out of the equilibrium methods. A total of 18 runs were made on samples of napthalene, biphenyl, and the commercial mixtures OM-2 (Progil) and Santowax-R (Monsanto), with an average deviation from the theoretical molecular mass of 0.6%. (Author) 7 refs.

  10. Software Technology for Adaptable Reliable Systems (STARS) Workshop March 24-27 1986.

    Science.gov (United States)

    1986-03-01

    ability to learn. The lessons we have learned cover market your services. Our experience shows many of the items mentioned in the that this effort, both to...34), use of language features that are sup- to really impact productivity will push the Sportive of software reuse, and software state of the art...houses, but will also be offereda products by houses specializing in marketing software tools and envircimrnts. C. AS355UL’IT C3 DO-STD2147 OM2 %V

  11. Main: 1LR4 [RPSD[Archive

    Lifescience Database Archive (English)

    Full Text Available 1LR4 トウモロコシ Corn Zea mays L. Casein Kinase Ii, Alpha Chain Name=Ack2; Zea Mays Mole...cule: Protein Kinase Ck2; Chain: A; Synonym: Casein Kinase Ii, Alpha Chain; Engineered: Yes Transferase 2.7....ray; A=2-326.|PDB; 1M2Q; X-ray; A=2-328.|PDB; 1M2R; X-ray; A=2-328.|PDB; 1OM1; X-ray; A=1-332.|Mai

  12. Significado de la maternidad para embarazadas y miembros del equipo de salud de Bucaramanga

    OpenAIRE

    Cáceres Manrique, Flor de María

    2012-01-01

    La salud maternoinfantil es una prioridad mundial y como tal ha sido objeto de políticas y programas estatales desde hace más de un siglo, con avances positivos en el control de la mortalidad evitable, pero con estancamiento y retrocesos en algunos casos, tal como lo muestran los datos de la Organización Mundial de la Salud (oms) [1]. Estos indicadores corresponden solo a la punta de iceberg del problema, que continúa siendo importante para la salud pública por la carg...

  13. Path Dependence

    DEFF Research Database (Denmark)

    Madsen, Mogens Ove

    Begrebet Path Dependence blev oprindelig udviklet inden for New Institutionel Economics af bl.a. David, Arthur og North. Begrebet har spredt sig vidt i samfundsvidenskaberne og undergået en udvikling. Dette paper propagerer for at der er sket så en så omfattende udvikling af begrebet, at man nu kan...... tale om 1. og 2. generation af Path Dependence begrebet. Den nyeste udvikling af begrebet har relevans for metodologi-diskusionerne i relation til Keynes...

  14. Technological study of organic fluids; Etudes technologiques des fluides caloporteurs organique

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Under contract to EURATOM (MM. VAN der VENNE and HANNAERT), the C.E.A. and the Progil Society have collaborated on a technological study of the terphenyls. The results obtained from the radiolysis and pyrolysis of the product OM2 (70 p. 100 m-terphenyl, 25 p. 100 o-terphenyl, 5 p. 100 p-terphenyl) are reported. Using two pile loops at temperatures up to 450 deg. C, a phenomena of accelerated pyrolysis on the radiolized material has been demonstrated. Some by-products of the petroleum industry have also been studied, with a view to finding substitutes for terphenyl. (author) [French] Le C.E.A. et la Societe PROGIL ont entrepris en commun sous contrat EURATOM (MM. VAN der VENNE et HANNAERT) une etude technologique des terphenyles. Les resultats de radiolyse et de pyrolyse obtenus sur le produit OM2 (70 p. 100 m-terphenyle, 25 p. 100 o-terphenyle. 5 p. 100 de p-terphenyle) sont exposes. L'exploitation de deux boucles en pile jusqu'a des temperatures de 450 deg. C a mis en evidence un phenomene de pyrolyse acceleree sur le produit radiolyse. On a etudie egalement quelques sous-produits de l'industrie petroliere dans le but de trouver des substituts au terphenyle. (auteur)

  15. Revised analysis of the (1+1) EA for the minimum spanning tree problem

    DEFF Research Database (Denmark)

    Witt, Carsten

    2014-01-01

    We revisit the classical analysis of the (1+1) EA for the minimum spanning tree problem in the case that nothing is known about the weights of the underlying graph. Here the original upper bound on the expected running time by Neumann and Wegener [Theor. Comput. Sci. 378(1), 32-40, 2007], which...... depends on the largest weight of the graph, is of no use. The best upper bound available before in this case is due to Reichel and Skutella [FOGA 2009, 21-28] and is of order O(m3 \\log n), where m is the number of edges and n the number of vertices. Using an adaptive drift analysis, we show the improved...... bound O(m2 (sqrt{c(G)} + \\log n)), where c(G) is the circumference (length of the longest cycle) of the graph. This is only by an asymptotic factor of at most sqrt{n}/\\log n away from the classical lower bound. Furthermore, an alternative fitness function leading to the bound O(m2\\log n) is proposed...

  16. Thermal exchanges: heat transfer - burn-out - fouling; Echanges thermiques: transfert de chaleur - brulage - encrassement

    Energy Technology Data Exchange (ETDEWEB)

    Courtaud, M; Ricque, R [Service des Transferts Thermiques, Centre d' Etudes Nucleaires de Grenoble (ISERE) (France)

    1967-01-01

    Under a contract with the department responsible for EURATOM's ORGEL project, the authors have investigated heat-transfer characteristics, the way in which they are affected by dissolved gases, burn-out and the effect of fouling of the cooling system walls. Heat transfer. Using a circular channel 12 mm in diameter, a single-phase heat-transfer correlation was obtained for OM2, OMP and OM2 plus 10, 20 and 30% HB; Nu = 0.00835 Re{sup 0.9} Pr{sup 0.4} for fluxes between 50 and 100 W/cm{sup 2} and Reynolds numbers between 30,000 and 350,000. The authors studied the way in which heat transfer under boiling conditions is affected by dissolved gases in both free convection and forced convection in annular geometry (18 mm x 22 mm). The occurrence of de gasification, which results in a substantial increase in the transfer coefficient, is governed by the saturation temperature of the gasified fluid. A theoretical method was established for determining the threshold for this phenomenon. At the same time it was shown that charge losses were not affected by the gas content in the de gasification zone. Burn-out. In annular geometry (18 mm x 22 mm) the following correlation was obtained: {phi}BO(W/cm{sup 2}) = 10+19 G{sup 1/2} + (10 + 15 G) {delta} T{sub sub} / 25 (G in 10{sup 3} kg/m{sup 2} s); 5 kg/cm{sup 2} < P < 8 kg/cm{sup 2} 350 deg. C < T{sub fluid} < 400 deg. C; 4 m/s < V < 10 m/s. The dissolved gases have no effect on burn-out. Fouling. The way in which a number of factors affect the fouling of the walls of an annular test section (12 mm x 16 mm) was studied in an out-of-pile loop during tests lasting on average 500 h, as a function of the effect of fouling on the heat-transfer coefficient. The following impurities were added to the basic product, which was commercial-grade OM2: iron (from a ferrous element, which had therefore been introduced into the circuit), high-polymer pyrolysis products (up to 30%), chlorine (30 ppm) and oxygen (300 ppm in the form of

  17. Weakly and strongly polynomial algorithms for computing the maximum decrease in uniform arc capacities

    Directory of Open Access Journals (Sweden)

    Ghiyasvand Mehdi

    2016-01-01

    Full Text Available In this paper, a new problem on a directed network is presented. Let D be a feasible network such that all arc capacities are equal to U. Given a t > 0, the network D with arc capacities U - t is called the t-network. The goal of the problem is to compute the largest t such that the t-network is feasible. First, we present a weakly polynomial time algorithm to solve this problem, which runs in O(log(nU maximum flow computations, where n is the number of nodes. Then, an O(m2n time approach is presented, where m is the number of arcs. Both the weakly and strongly polynomial algorithms are inspired by McCormick and Ervolina (1994.

  18. Implementation of surface hopping molecular dynamics using semiempirical methods

    International Nuclear Information System (INIS)

    Fabiano, E.; Keal, T.W.; Thiel, W.

    2008-01-01

    A molecular dynamics driver and surface hopping algorithm for nonadiabatic dynamics has been implemented in a development version of the MNDO semiempirical electronic structure package. The required energies, gradients and nonadiabatic couplings are efficiently evaluated on the fly using semiempirical configuration interaction methods. The choice of algorithms for the time evolution of the nuclear motion and quantum amplitudes is discussed, and different schemes for the computation of nonadiabatic couplings are analysed. The importance of molecular orbital tracking and electronic state following is underlined in the context of configuration interaction calculations. The method is applied to three case studies (ethylene, methaniminium ion, and methanimine) using the orthogonalization corrected OM2 Hamiltonian. In all three cases decay times and dynamics paths similar to high-level ab initio results are obtained

  19. In-Building Wireless Distribution in legacy Multimode Fiber with an improved RoMMF system

    DEFF Research Database (Denmark)

    Visani, Davide; Petersen, Martin Nordal; Sorci, Francesca

    2012-01-01

    A radio over multimode fiber (RoMMF) system for in-building wireless distribution employing a directly modulated Fabry-Perot (FP) transmitter and the central launch technique is presented. The worst-case spurious free dynamic range (SFDR) exceeds 105 dB×Hz2/3 up to 525 m of OM2 multimode fiber (MMF......). Experimental and theoretical results are reported showing that this scheme outperforms a RoMMF system employing a distributed feed-back (DFB) laser diode (LD) and/or a mode scrambler to achieve overfilled launch (OFL). Long Term Evolution (LTE) signal transmission is achieved with high quality in terms...... of Adjacent Channel Leakage Ratio (ACLR) and Error Vector Magnitude (EVM)....

  20. The unknowns in particles physics

    International Nuclear Information System (INIS)

    Spiro, M.

    1996-01-01

    The author presents the historical quest of particles since Democrite's time. Some particles are very difficult to identify as for instance neutrinos and antiparticles. Nine anti-hydrogen atoms have just being manufactured in the CERN. This successful result is the last episode of a long history. This achievement is the first step in the elaboration of antimatter too. The enigma of the antimatter created at the universe dawn is perennial. Why is the universe made of matter and not of antimatter? Is there any slight difference in the physical law of antimatter and matter? That's why the study of antimatter is so important. The question of the missing mass of our galaxy leads to another quest: the Higgs's particles. The graviton is another target. That could lead to the unification theory, may be another proof of the unreasonable efficiency of mathematics. (O.M.). 2 figs

  1. A fast conservative spectral solver for the nonlinear Boltzmann collision operator

    International Nuclear Information System (INIS)

    Gamba, Irene M.; Haack, Jeffrey R.; Hu, Jingwei

    2014-01-01

    We present a conservative spectral method for the fully nonlinear Boltzmann collision operator based on the weighted convolution structure in Fourier space developed by Gamba and Tharkabhushnanam. This method can simulate a broad class of collisions, including both elastic and inelastic collisions as well as angularly dependent cross sections in which grazing collisions play a major role. The extension presented in this paper consists of factorizing the convolution weight on quadrature points by exploiting the symmetric nature of the particle interaction law, which reduces the computational cost and memory requirements of the method to O(M 2 N 4 logN) from the O(N 6 ) complexity of the original spectral method, where N is the number of velocity grid points in each velocity dimension and M is the number of quadrature points in the factorization, which can be taken to be much smaller than N. We present preliminary numerical results

  2. Main: 1M2Q [RPSD[Archive

    Lifescience Database Archive (English)

    Full Text Available 1M2Q トウモロコシ Corn Zea mays L. Casein Kinase Ii, Alpha Chain Name=Ack2; Zea Mays Mole...cule: Casein Kinase Ii, Alpha Chain; Chain: A; Fragment: Catlytic Subunit; Synonym: Ckii; Engineered: Yes Tr...ansferase 2.7.1.37 (Casein Kinase Ii, Alpha Chain) E.De Moliner, S.Sarno, S.Moro, G.Zagotto, G.Zanotti, L.A....=2-326.|PDB; 1M2Q; X-ray; A=2-328.|PDB; 1M2R; X-ray; A=2-328.|PDB; 1OM1; X-ray; A=1-332.|Mai

  3. Measurement of oxygen chemical diffusion in PuO{sub 2-x} and analysis of oxygen diffusion in PuO{sub 2-x} and (Pu,U)O{sub 2-x}

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Masato; Uchida, Teppei [Advanced Nuclear System Research and Development Directorate, Japan Atomic Energy Agency, 4-33 Muramatsu, Tokai-mura, Ibaraki 319-1194 (Japan); Sunaoshi, Takeo [Inspection Development Company Ltd., 4-33 Muramatsu, Tokai-mura, Ibaraki 319-1194 (Japan)

    2013-02-15

    Oxygen chemical diffusion in PuO{sub 2-x} was investigated in the temperature range of 1473-1873 K by thermogravimetry as functions of oxygen-to-metal (O/M) ratios and temperatures. The oxygen chemical diffusion coefficients, D were determined assuming that the reduction curves were dominated by a diffusion process. The O/M ratio and Pu content dependence on the chemical diffusion coefficients were evaluated. The chemical diffusion coefficient had its minimum value at around O/M=1.98 and decreased with increasing Pu content in (U,Pu)O{sub 2-x}. The self-diffusion coefficients were evaluated. A model for describing the relationship among O/M ratio, oxygen chemical diffusion, and self-diffusion was proposed based on defect chemistry. (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  4. Realistic multisite lattice-gas modeling and KMC simulation of catalytic surface reactions: Kinetics and multiscale spatial behavior for CO-oxidation on metal (1 0 0) surfaces

    Science.gov (United States)

    Liu, Da-Jiang; Evans, James W.

    2013-12-01

    A realistic molecular-level description of catalytic reactions on single-crystal metal surfaces can be provided by stochastic multisite lattice-gas (msLG) models. This approach has general applicability, although in this report, we will focus on the example of CO-oxidation on the unreconstructed fcc metal (1 0 0) or M(1 0 0) surfaces of common catalyst metals M = Pd, Rh, Pt and Ir (i.e., avoiding regimes where Pt and Ir reconstruct). These models can capture the thermodynamics and kinetics of adsorbed layers for the individual reactants species, such as CO/M(1 0 0) and O/M(1 0 0), as well as the interaction and reaction between different reactant species in mixed adlayers, such as (CO + O)/M(1 0 0). The msLG models allow population of any of hollow, bridge, and top sites. This enables a more flexible and realistic description of adsorption and adlayer ordering, as well as of reaction configurations and configuration-dependent barriers. Adspecies adsorption and interaction energies, as well as barriers for various processes, constitute key model input. The choice of these energies is guided by experimental observations, as well as by extensive Density Functional Theory analysis. Model behavior is assessed via Kinetic Monte Carlo (KMC) simulation. We also address the simulation challenges and theoretical ramifications associated with very rapid diffusion and local equilibration of reactant adspecies such as CO. These msLG models are applied to describe adsorption, ordering, and temperature programmed desorption (TPD) for individual CO/M(1 0 0) and O/M(1 0 0) reactant adlayers. In addition, they are also applied to predict mixed (CO + O)/M(1 0 0) adlayer structure on the nanoscale, the complete bifurcation diagram for reactive steady-states under continuous flow conditions, temperature programmed reaction (TPR) spectra, and titration reactions for the CO-oxidation reaction. Extensive and reasonably successful comparison of model predictions is made with experimental data. Furthermore, we discuss the possible transition from traditional mean-field-type bistability and reaction kinetics for lower-pressure to multistability and enhanced fluctuation effects for moderate- or higher-pressure. Behavior in the latter regime reflects a stronger influence of adspecies interactions and also lower diffusivity in the higher-coverage mixed adlayer. We also analyze mesoscale spatiotemporal behavior including the propagation of reaction-diffusion fronts between bistable reactive and inactive states, and associated nucleation-mediated transitions between these states. This behavior is controlled by complex surface mass transport processes, specifically chemical diffusion in mixed reactant adlayers for which we provide a precise theoretical formulation. The msLG models together with an appropriate treatment of chemical diffusivity enable equation-free heterogeneous coupled lattice-gas (HCLG) simulations of spatiotemporal behavior. In addition, msLG + HCLG modeling can describe coverage variations across polycrystalline catalysts surfaces, pressure variations across catalyst surfaces in microreactors, and could be incorporated into a multiphysics framework to describe mass and heat transfer limitations for high-pressure catalysis.

  5. Strategy Iteration Is Strongly Polynomial for 2-Player Turn-Based Stochastic Games with a Constant Discount Factor

    DEFF Research Database (Denmark)

    Hansen, Thomas Dueholm; Miltersen, Peter Bro; Zwick, Uri

    2013-01-01

    Ye [2011] showed recently that the simplex method with Dantzig’s pivoting rule, as well as Howard’s policy iteration algorithm, solve discounted Markov decision processes (MDPs), with a constant discount factor, in strongly polynomial time. More precisely, Ye showed that both algorithms terminate...... terminates after at most O(m1−γ log n1−γ) iterations. Second, and more importantly, we show that the same bound applies to the number of iterations performed by the strategy iteration (or strategy improvement) algorithm, a generalization of Howard’s policy iteration algorithm used for solving 2-player turn-based...... for 2-player turn-based stochastic games; it is strongly polynomial for a fixed discount factor, and exponential otherwise....

  6. Measurement of oxygen chemical diffusion in PuO2-x and analysis of oxygen diffusion in PuO2-x and (Pu,U)O2-x

    International Nuclear Information System (INIS)

    Kato, Masato; Uchida, Teppei; Sunaoshi, Takeo

    2013-01-01

    Oxygen chemical diffusion in PuO 2-x was investigated in the temperature range of 1473-1873 K by thermogravimetry as functions of oxygen-to-metal (O/M) ratios and temperatures. The oxygen chemical diffusion coefficients, D were determined assuming that the reduction curves were dominated by a diffusion process. The O/M ratio and Pu content dependence on the chemical diffusion coefficients were evaluated. The chemical diffusion coefficient had its minimum value at around O/M=1.98 and decreased with increasing Pu content in (U,Pu)O 2-x . The self-diffusion coefficients were evaluated. A model for describing the relationship among O/M ratio, oxygen chemical diffusion, and self-diffusion was proposed based on defect chemistry. (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. An unusual presentation of ischaemic mitral regurgitation as P2 prolapse.

    Science.gov (United States)

    Thompson, David S; Punjabi, Prakash P

    2017-11-01

    A 54-year-old gentleman presented with pulmonary oedema secondary to anterolateral papillary muscle (PPM) rupture and acute mitral regurgitation subsequent to myocardial ischaemia (MI). Angiography revealed complete occlusion of the first obtuse marginal (OM1) branch of the circumflex coronary artery and a 70% occlusion of the left anterior descending (LAD) coronary artery. Operatively, unusual anatomy was noted; an accessory head was attached superiorly to the anterior lateral PPM. This gave rise to chordae that were subsequently attached to the posterior second (P2) scallop. Additionally, the P2 scallop was deficient in chordae from the posteromedial PPM, thus, loss of this accessory head led to severe mitral regurgitation. We review the PPM anatomy and pathological context of PPM rupture and ischaemic mitral regurgitation.

  8. New active natural phytocompounds for the treatment and prevention of infectious diarrhea

    OpenAIRE

    Mohamed Salem, Reda Mohamed

    2016-01-01

    Las infecciones entéricas siguen siendo uno de los problemas más importantes de salud pública. La diarrea infecciosa es a nivel mundial la segunda causa de morbilidad y mortalidad infantil, con 4,6 millones de muertes de los aproximadamente un billón de episodios de diarrea al año reportados en niños. Según informes recientes de la OMS, 1,9 millones de niños menores de cinco años siguen muriendo de estas enfermedades cada año. Los principales síntomas clínicos de las infecciones entéricas inc...

  9. Flexible Ultra Moisture Barrier Film for Thin-Film Photovoltaic Applications

    Energy Technology Data Exchange (ETDEWEB)

    David M. Dean

    2012-10-30

    Flexible Thin-film photovoltaic (TFPV) is a low cost alternative to incumbent c-Si PV products as it requires less volume of costly semiconductor materials and it can potentially reduce installation cost. Among the TFPV options, copper indium gallium diselenide (CIGS) has the highest efficiency and is believed to be one of the most attractive candidates to achieve PV cost reduction. However, CIGS cells are very moisture sensitive and require module water vapor transmission rate (WVTR) of less than 1x10-4 gram of water per square meter per day (g-H2O/m2/day). Successful development and commercialization of flexible transparent ultra moisture barrier film is the key to enable flexible CIGS TFPV products, and thus enable ultimate PV cost reduction. At DuPont, we have demonstrated at lab scale that we can successfully make polymer-based flexible transparent ultra moisture barrier film by depositing alumina on polymer films using atomic layer deposition (ALD) technology. The layer by layer ALD approach results in uniform and amorphous structure which effectively reduces pinhole density of the inorganic coating on the polymer, and thus allow the fabrication of flexible barrier film with WVTR of 10-5 g-H2O/m2/day. Currently ALD is a time-consuming process suitable only for high-value, relatively small substrates. To successfully commercialize the ALD-on-plastic technology for the PV industry, there is the need to scale up this technology and improve throughput. The goal of this contract work was to build a prototype demonstrating that the ALD technology could be scaled-up for commercial use. Unfortunately, the prototype failed to produce an ultra-barrier film by the close of the project.

  10. Intermolecular interactions in the condensed phase: Evaluation of semi-empirical quantum mechanical methods.

    Science.gov (United States)

    Christensen, Anders S; Kromann, Jimmy C; Jensen, Jan H; Cui, Qiang

    2017-10-28

    To facilitate further development of approximate quantum mechanical methods for condensed phase applications, we present a new benchmark dataset of intermolecular interaction energies in the solution phase for a set of 15 dimers, each containing one charged monomer. The reference interaction energy in solution is computed via a thermodynamic cycle that integrates dimer binding energy in the gas phase at the coupled cluster level and solute-solvent interaction with density functional theory; the estimated uncertainty of such calculated interaction energy is ±1.5 kcal/mol. The dataset is used to benchmark the performance of a set of semi-empirical quantum mechanical (SQM) methods that include DFTB3-D3, DFTB3/CPE-D3, OM2-D3, PM6-D3, PM6-D3H+, and PM7 as well as the HF-3c method. We find that while all tested SQM methods tend to underestimate binding energies in the gas phase with a root-mean-squared error (RMSE) of 2-5 kcal/mol, they overestimate binding energies in the solution phase with an RMSE of 3-4 kcal/mol, with the exception of DFTB3/CPE-D3 and OM2-D3, for which the systematic deviation is less pronounced. In addition, we find that HF-3c systematically overestimates binding energies in both gas and solution phases. As most approximate QM methods are parametrized and evaluated using data measured or calculated in the gas phase, the dataset represents an important first step toward calibrating QM based methods for application in the condensed phase where polarization and exchange repulsion need to be treated in a balanced fashion.

  11. THE INTENSITY OF TRANSPIRATION OF THE LEAVES OF GLYCINE MAX (L. MERR. DEPENDING ON THE GROWTH PHASE AND THE TIERED ARRANGEMENT ON THE PLANT

    Directory of Open Access Journals (Sweden)

    A. V. Amelin

    2018-01-01

    Full Text Available The thematic core facilities plan, CCU of Orel state agrarian university "Genetic resources of plants and their use" for a joint program with Shatilovskay of Institute of leguminous and cereal crops, of field and vegetation experiments on the study of specific features of manifestation of the activity of transpiration leaves of soybean are achieved. The object of the study were 10 varieties of soybeans that were grown on plots of 15 m2 in four replications. Seeding was carried out breeding seeder calculated 600 thousand of viable seeds per hectare. the way the plots were allocated systematically with offset. The care of crops was carried out in accordance with the recommended regional events. It was demonstrated that leaf transpiration activity of the culture increases sharply in the transition of plants to the generative period of development, reaching a maximum in the phase of mass fruit formation, when the most active growth and, consequently, the demand for assimilate. The intensity of transpiration of leaves during this period of plant development was by 8.22 mmol H2O/m2c. The highest transpiration activity was typical for the upper leaves located in the generative sphere of plants, the lowest - activity was fount for the lowerst leaves. On the 5th node from the bottom, its value was 2.2 times lower compared to the assimilating leaves at the top of the plants (3-4 knots top. Thus, the most intensive evaporation of the water by leaves are held from 9:00 to 13:00 hours Moscow time. The intensity of transpiration in this period amounted to an average of 5.42 mmol H2O/m2c, which was 19.9% higher than in the morning (from 7:00 to 8:00 and 42.3% in the afternoon (from 15:00 to 17:00.

  12. Intermolecular interactions in the condensed phase: Evaluation of semi-empirical quantum mechanical methods

    Science.gov (United States)

    Christensen, Anders S.; Kromann, Jimmy C.; Jensen, Jan H.; Cui, Qiang

    2017-10-01

    To facilitate further development of approximate quantum mechanical methods for condensed phase applications, we present a new benchmark dataset of intermolecular interaction energies in the solution phase for a set of 15 dimers, each containing one charged monomer. The reference interaction energy in solution is computed via a thermodynamic cycle that integrates dimer binding energy in the gas phase at the coupled cluster level and solute-solvent interaction with density functional theory; the estimated uncertainty of such calculated interaction energy is ±1.5 kcal/mol. The dataset is used to benchmark the performance of a set of semi-empirical quantum mechanical (SQM) methods that include DFTB3-D3, DFTB3/CPE-D3, OM2-D3, PM6-D3, PM6-D3H+, and PM7 as well as the HF-3c method. We find that while all tested SQM methods tend to underestimate binding energies in the gas phase with a root-mean-squared error (RMSE) of 2-5 kcal/mol, they overestimate binding energies in the solution phase with an RMSE of 3-4 kcal/mol, with the exception of DFTB3/CPE-D3 and OM2-D3, for which the systematic deviation is less pronounced. In addition, we find that HF-3c systematically overestimates binding energies in both gas and solution phases. As most approximate QM methods are parametrized and evaluated using data measured or calculated in the gas phase, the dataset represents an important first step toward calibrating QM based methods for application in the condensed phase where polarization and exchange repulsion need to be treated in a balanced fashion.

  13. Effects of fullerol on the osteogenic differentiation of adipose-derived mesenchymal stem cells

    Directory of Open Access Journals (Sweden)

    Yan-ting TANG

    2016-09-01

    Full Text Available Objective  To investigate the effect of fullerol on the osteogenic differentiation of rat adipose-derived mesenchymal stem cells (rADSCs based on hanging drop culture. Methods  rADSC spheres were formed by hanging drop culture for 3 days, then the spheres were dissociated to single cell by trypsin (called rADSC sphere-derived cells. The rADSC sphere-derived cells were cultured in 2-D adherent cell cultures for 24 hours, then the ordinary culture medium was replaced by osteogenic induction medium (osteogenic medium, OM. OM without fullerol served as control group (CM; OM with 1.0μmol/L fullerol was used as the experimental group (OM+Ful1.0μmol/L. Two groups were induced to differentiation for 14d and 21d, using two methods of alizarin red staining and quantitative real-time PCR (qPCR to detecte the ability of rADSC sphere-derived cells differentiating into osteoblasts. Results  rADSCs could form a uniform size microspheres structure through hanging drop culture for 3 days; rADSC sphere-derived cells were obtained by dissipation of trypsin. Compared with OM group, OM+Ful1.0μmol/L can make rADSC sphere-derived cells form more mineralized calcium nodules, and enhance the expression of the relevant osteogenic gene Runx2, OCN and ColI. Conclusion  Fullerol can significantly enhance the osteogenic differentiation of rADSCs based on hanging drop culture, and it is helpful to improve the efficiency of osteogenic induction of rADSCs. DOI: 10.11855/j.issn.0577-7402.2016.08.03

  14. Elevated CO2 leads to carbon sequestration by modulating C4 photosynthesis pathway enzyme (PPDK) in Suaeda monoica and S. fruticosa.

    Science.gov (United States)

    Yadav, Sonam; Mishra, Avinash; Jha, Bhavanath

    2018-01-01

    The C 4 halophytic species Suaeda monoica and S. fruticosa, possess the C 4 photosynthesis pathway without Kranz anatomy were grown at ambient (470ppm CO 2 ) and elevated (850ppm CO 2 ) atmospheric CO 2 under control containment facility to study the plant response under CO 2 stress condition. The relative growth of both Suaeda species was enhanced with atmospheric CO 2 enrichment compared to control (ambient) condition. The photosynthesis rate was found 2.5μmolCO 2 m -2 s -1 in both species under stress condition compared to about 1.9μmolCO 2 m -2 s -1 under control conditions. About 0.3molH 2 Om -2 s -1 conductance was detected under an unstressed condition which decreased significantly to ~0.07molH 2 Om -2 s -1 on the 6th day of stress treatment. Similarly, transpiration rate was also decreased significantly from 4.4-5.2mmolH 2 Om -2 s -1 to 1.7-1.9 under stress condition. In contrast, VpdL increased significantly from 1.9kPa to 2.5kPa under stress condition. A higher total chlorophyll content observed in S. monoica (56.36mgg -1 tissue) compared to S. fruticosa (33.12mgg -1 tissue) under unstressed (control) condition. A significant increase was found in the total chlorophyll content of S. fruticosa (45.47mgg -1 tissue) with stress treatment compared to control (33.12mgg -1 tissue). In contrast, the total chlorophyll decreased in S. monoica (51.58mgg -1 tissue) under similar stress condition compared to control plants (56.36mgg -1 tissue). About 6-6.8mg total sugar per gram tissue found under control condition which enhanced further (7.5 to 11mgg -1 tissue) under stress condition. Similarly, total reducing sugar (~2mgg -1 tissue) and total starch content (6.5-11mgg -1 tissue) increased under stress condition. About 6.5- and 3- fold higher expression of PPDK gene was observed for S. monoica and S. fruticosa, respectively under CO 2 stress condition. PPDK (1.2- and 1.5- fold) and antioxidant enzymes; APX (12.7- and two-fold), CAT (2.2- and 6.4- fold) and SOD (4

  15. Extrato de alho como alternativa na quebra de dormência de gemas em macieiras cv. Fuji Kiku Garlic extract as alternative on bud dormant break of apple trees cv. Fuji Kiku

    Directory of Open Access Journals (Sweden)

    Renato Vasconcelos Botelho

    2007-04-01

    Full Text Available Este trabalho teve por objetivo estudar os efeitos do extrato de alho (Bioalho® na quebra de dormência de gemas de macieiras 'Fuji Kiku', em comparação ao uso convencional de cianamida hidrogenada (H2CN2, na região de Guarapuava-PR. Logo após a poda de inverno, em setembro de 2005, os seguintes tratamentos foram pulverizados nas plantas durante o estádio fenológico de gema dormente: 1 Testemunha (sem tratamento; 2 EA (extrato de alho 1%; 3 EA 5%; 4 EA 10%; 5 OM (óleo mineral 2%; 6 EA 1% + OM 2%; 7 EA 5% + OM 2%; 8 EA 10% + OM 2%; 9 H2CN2 0,4% + OM 4%. Os tratamentos com extrato de alho e óleo mineral apresentaram efeitos similares ao tratamento convencional com cianamida hidrogenada e óleo mineral, atingindo mais de 90% de brotação das gemas aos 50 DAT, enquanto o tratamento com óleo mineral isoladamente a 2% e a testemunha atingiram apenas 62,5 e 42,7%, respectivamente. Os tratamentos com EA 5% ou 10%, com ou sem óleo mineral, foram os que apresentaram menores valores para as variáveis número de frutos, produção por planta e produtividade por área, não por ineficiência na quebra de dormência, mas, possivelmente, pela antecipação da floração que coincidiu com período bastante chuvoso no início da primavera.This study aimed to examine the effects of garlic extract (Bioalho® on bud break of 'Fuji Kiku' apple trees in comparison to the conventional use of hydrogen cyanamide (H2CN2 at the region of Guarapuava-PR, Brazil. Soon after winter pruning, in September 2005, the following treatments were sprayed on plants at dormant bud stage: 1 control (untreated; 2 1% GE (garlic extract; 3 5% GE; 4 10% GE; 5 2% MO (mineral oil; 6 1% GE + 2% MO; 7 5% GE + 2% MO; 8 10% GE + 2% MO; 9 0.4% H2CN2 + 4% MO. The treatments with garlic extract and mineral oil showed similar effects in comparison to the hydrogen cyanamide treatment, achieving up to 90% of bud sprouting at 50 DAT, while only 2% mineral oil and control, attained only 62

  16. Rural continental aerosol properties and processes observed during the Hohenpeissenberg Aerosol Characterization Experiment (HAZE2002

    Directory of Open Access Journals (Sweden)

    N. Hock

    2008-02-01

    Full Text Available Detailed investigations of the chemical and microphysical properties of rural continental aerosols were performed during the HAZE2002 experiment, which was conducted in May 2002 at the Meteorological Observatory Hohenpeissenberg (DWD in Southern Germany.

    Online measurements included: Size-resolved chemical composition of submicron particles; total particle number concentrations and size distributions over the diameter range of 3 nm to 9 μm; gas-phase concentration of monoterpenes, CO, O3, OH, and H2SO4. Filter sampling and offline analytical techniques were used to determine: Fine particle mass (PM2.5, organic, elemental and total carbon in PM2.5 (OC2.5, EC2.5, TC2.5, and selected organic compounds (dicarboxylic acids, polycyclic aromatic hydrocarbons, proteins.

    Overall, the non-refractory components of submicron particles detected by aerosol mass spectrometry (PM1, 6.6±5.4 μg m−3, arithmetic mean and standard deviation accounted for ~62% of PM2.5 determined by filter gravimetry (10.6±4.7 μg m−3. The relative proportions of non-refractory submicron particle components were: (23±39% ammonium nitrate, (27±23% ammonium sulfate, and (50±40% organics (OM1. OM1 was closely correlated with PM1 (r2=0.9 indicating a near-constant ratio of non-refractory organics and inorganics.

    The average ratio of OM1 to OC2.5 was 2.1±1.4, indicating a high proportion of heteroelements in the organic fraction of the sampled rural aerosol. This is consistent with the high ratio of oxygenated organic aerosol (OOA over hydrocarbon-like organic aerosol (HOA inferred from the AMS results (4:1, and also with the high abundance of proteins (~3% indicating a high proportion of primary biological material (~30% in PM2.5. This finding was confirmed by low abundance of PAHs (<1 ng m−3 and EC (<1 μg m−3 in PM2.5 and detection of several

  17. Effect of fresh green waste and green waste compost on mineral nitrogen, nitrous oxide and carbon dioxide from a Vertisol

    International Nuclear Information System (INIS)

    Vaughan, Sarah M.; Dalal, Ram C.; Harper, Stephen M.; Menzies, Neal W.

    2011-01-01

    Incorporation of organic waste amendments to a horticultural soil, prior to expected risk periods, could immobilise mineral N, ultimately reducing nitrogen (N) losses as nitrous oxide (N 2 O) and leaching. Two organic waste amendments were selected, a fresh green waste (FGW) and green waste compost (GWC) as they had suitable biochemical attributes to initiate N immobilisation into the microbial biomass and organic N forms. These characteristics include a high C:N ratio (FGW 44:1, GWC 35:1), low total N ( 14%). Both products were applied at 3 t C/ha to a high N (plus N fertiliser) or low N (no fertiliser addition) Vertisol soil in PVC columns. Cumulative N 2 O production over the 28 day incubation from the control soil was 1.5 mg/N 2 O/m 2 , and 11 mg/N 2 O/m 2 from the control + N. The N 2 O emission decreased with GWC addition (P 2 O emissions by 38% by the conclusion of the incubation. Analysis of mineral N concentrations at 7, 14 and 28 days identified that both FGW and GWC induced microbial immobilisation of N in the first 7 days of incubation regardless of whether the soil environment was initially high or low in N; with the FGW immobilising up to 30% of available N. It is likely that the reduced mineral N due to N immobilisation led to a reduced substrate for N 2 O production during the first week of the trial, when soil N 2 O emissions peaked. An additional finding was that FGW + N did not decrease cumulative N 2 O emissions compared to the control + N, potentially due to the fact that it stimulated microbial respiration resulting in anaerobic micro sites in the soil and ultimately N 2 O production via denitrification. Therefore, both materials could be used as post harvest amendments in horticulture to minimise N loss through nitrate-N leaching in the risk periods between crop rotations. The mature GWC has potential to reduce N 2 O, an important greenhouse gas.

  18. Emissions of N2O from peat soils under different cropping systems

    Science.gov (United States)

    Norberg, Lisbet; Berglund, Örjan; Berglund, Kerstin

    2016-04-01

    Drainage of peatlands for agriculture use leads to an increase in nitrogen turnover rate causing emissions of N2O to the atmosphere. Agriculture contributes to a substantial part of the anthropogenic emissions of N2O therefore mitigation options for the farmers are important. Here we present a field study with the aim to investigate if the choice of cropping system can mitigate the emission of N2O from cultivated organic soils. The sites used in the study represent fen peat soils with a range of different soil properties located in different parts of southern Sweden. All sites are on active farms with good drainage. N2O emissions from the soil under two different crops grown on the same field, with the same soil type, drainage intensity and weather conditions, are compared by gas sampling. The crops included are oat, barley, carrot, potato and grassland. Three or four sampling occasions during the growing season in 2010 were carried out with static chambers. The N2O emission is calculated from the linear increase of gas concentration in the chamber headspace during the incubation time of 40 minutes. Parallel to the gas sampling soil temperature and soil moisture are measured and some soil properties determined. The result from the gas sampling and measurements show no significant difference in seasonal average N2O emission between the compared crops at any site. There are significant differences in N2O emissions between the compared crops at some of the single sampling occasions but the result vary and no crop can be pointed out as a mitigation option. The seasonal average N2O emissions varies from 16±17 to 1319±1971 μg N2O/m2/h with peaks up to 3317 μg N2O/m2/h. The N2O emission rate from peat soils are determined by other factors than the type of crops grown on the field. The emission rates vary during the season and especially between sites. Although all sites are fen peat soil the soil properties are different, e.g. carbon content varies between 27-43% and pH 5.4-7.7, but showed no correlation with N2O emission rate.

  19. Effects of three years of simulated nitrogen deposition on soil nitrogen dynamics and greenhouse gas emissions in a Korean pine plantation of northeast China.

    Science.gov (United States)

    Song, Lei; Tian, Peng; Zhang, Jinbo; Jin, Guangze

    2017-12-31

    Continuously enhanced nitrogen (N) deposition alters the pattern of N and carbon (C) transformations, and thus influences greenhouse gas emissions. It is necessary to clarify the effect of N deposition on greenhouse gas emissions and soil N dynamics for an accurate assessment of C and N budgets under increasing N deposition. In this study, four simulated N deposition treatments (control [CK: no N addition], low-N [L: 20kgNha -1 yr -1 ], medium-N [M: 40kgNha -1 yr -1 ], and high-N [H: 80kgNha -1 yr -1 ]) were operated from 2014. Carbon dioxide, methane and nitrous oxide fluxes were monitored semimonthly, as were soil variables such as temperature, moisture and the concentrations of total dissolved N (TDN), NO 3 - , NO 2 - , NH 4 + , and dissolved organic N (DON) in soil solutions. The simulated N deposition resulted in a significant increase in TDN, NO 3 - and DON concentrations in soil solutions. The average CO 2 emission rate ranged from 222.6mgCO 2 m -2 h -1 in CK to 233.7mgCO 2 m -2 h -1 in the high-N treatment. Three years of simulated N deposition had no effect on soil CO 2 emission, which was mainly controlled by soil temperature. The mean N 2 O emission rate during the whole 3years was 0.02mgN 2 Om -2 h -1 for CK, which increased significantly to 0.05mgN 2 Om -2 h -1 in the high-N treatment. The N 2 O emission rate positively correlated with NH 4 + concentrations, and negatively correlated with soil moisture. The average CH 4 flux during the whole 3years was -0.74μgCH 4 m -2 h -1 in CK, which increased to 1.41μgCH 4 m -2 h -1 in the low-N treatment. CH 4 flux positively correlated with NO 3 - concentrations. These results indicate that short-term N deposition did not affect soil CO 2 emissions, while CH 4 and N 2 O emissions were sensitive to N deposition. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Heat transfer with organic fluids; Transferts de chaleur par liquides organiques

    Energy Technology Data Exchange (ETDEWEB)

    Lanza, F [Association Euratom-CEA, Centre d' Etudes de Grenoble, 38 (France). Dept. de Recherches sur la Fusion Controlee; Ricque, R; Villeneuve, J P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    Using a test channel with a circular cross-section of 12 mm internal diameter the following heat transfer correlation, valid to about {+-} 6 p. 100, was determined for the terphenyls OMP and OM2 with 0, 10, 20 or 30 p. 100 of high polymers: Nu{sub b} = 0.00835 Re{sub b}{sup 0.9} Pr{sub L}{sup 0.4}. This correlation was established with fluxes ranging from 50 to 100 W/cm{sup 2}, temperatures from 290 to 420 C and Reynolds number from 30 000 to 350 000. 8 long-term tests were carried out (250 to 1000 hours continuous running) to determine how deposition on the heating surfaces affects the exchange coefficient. The loops is made of stainless steel except for one part in soft steel. No deposits are observed even if the terphenyl contains 30 ppm of chlorure, while on the other hand deposition is appreciable when heavy substances containing combined oxygen are added. (authors) [French] On a determine sur un canal d'essai de section circulaire de 12 mm de diametre interieur, la correlation de transfert de chaleur suivante valable a {+-} 6 p.100 pres pour les terphenyles OMP et OM2 avec 0, 10, 20 ou 30 p. 100 de haute polymeres Nu{sub b} = 0,00835 Re{sub b}{sup 0.9} Pr{sub L}{sup 0.4}. Cette correlation a ete etablie dans une gamme de flux de 50 a 100 W/cm{sup 2}, de temperature de 290 a 420 C, de Reynolds de 30 000 a 350 000. On a effectue 8 essais de longue duree (250 a 1 000 heures en regime continu) pour determiner l'effet sur le coefficient d'echange de l'encrassement des surfaces chauffantes. La boucle est en acier inoxydable sauf une partie en acier doux; on n'observe aucun encrassement meme si le terphenyle contient 30 ppm de chlore; par contre l'encrassement est sensible quand on ajoute des produits lourds contenant de l'oxygene combine. (auteurs)

  1. [Effects of different fertilization measures on N2O emission in oil sunflower field in irrigation area of upper Yellow River].

    Science.gov (United States)

    Chen, Zhe; Chen, Yuan-yuan; Gao, Ji; Liu, Ru-liang; Yang, Zheng-li; Zhang, Ai-ping

    2015-01-01

    Agricultural soil has become the largest anthropogenic source of atmospheric nitrous oxide (N20). To estimate the impacts of long-term combined application of organic and inorganic fertilizers on N20 emission in a typical winter wheat-oil sunflower cropping system in the Ningxia irrigation area, we measured N20 fluxes using the static opaque chamber-gas chromatograph method and monitored the seasonal dynamics of related factors. Our results showed that nitrogen addition in the previous crop field significantly stimulated N2O emissions during the following oil-sunflower cultivation, and the mean fluxes of N300-OM, N240-OM1/2, N300 and N240 were (34.16 ± 9.72), (39.69 ±10.70), (27.75 ±9.57) and (26.30 ± 8.52) µg . m-2 . h-1, respectively, which were 4.09, 4.75, 3.32 and 3.15 times of the control groups. The total cumulative N2O emissions of fertilizer treatments in growing season was as high as 796.7 to 1242.5 g . hm-2, which was 2.99 to 4.67 times of the control groups. During the growing season, the rates of N2O emission in each month organic and inorganic fertlizers combined treatments were similar at high levels. N2O emission in chemical fertilizer treatments gradually decreased, and the main period of N2O emission occurred at the beginning of growing season. Taking July for example, N2O emission accounted for 41.3% to 41. 8% of total cumulative amount. The amounts of N20 emission under organic and inorganic fertilizers combined treatments were significantly higher than under chemical fertilizer treatments. The N2O emissions were not significantly different between conventional and optimized applications of nitrogen fertilizer under the same fertilizing method, either between N300-OM and N240-OM1/2, or between N300 and N240. On account of the drought, N2O emission in each treatment was mainly affected by soil moisture. N2O emission had a significant positive correlation with soil ammonium nitrogen content under combined applications of organic and inorganic

  2. Avaliação de herbicidas no controle de plantas daninhas na cultura da soja Evaluation of herbicides in the control of weeds in the soybean crop

    Directory of Open Access Journals (Sweden)

    A.C. De Barros

    1992-01-01

    Full Text Available Foi conduzido em Serranópolis, GO, um ensaio objetivando avaliar a eficiência e a seletividade de herbicidas no controle de plantas daninhas na cultura da soja (Glycine max (L. Merril, utilizando-se os seguintes tratamentos: A 100 g/ha de imazethapyr (ácido 2-[4,5-dihidro-4-metil-4(1-metiletil-5-oxo-1H-imidazol-2-ilo]-5-etil-3-piridinacarboxilico + surfactante, a 0,25% v/v; B tratamento A e 15 dias após, 230 g/ha de sethoxydim (2-1-etoximino-butil-5-2(etiltio-propil-3-hidroxi-2-ciclohexeno-1-ona + óleo mineral, a 0,25% v/v; C 230 g/ha de sethoxydim + óleo mineral, a 0,25% v/v; D 480 + 200 + 230 g/ha de bentazon (3-isopropil-2,1,3-benzotiadiazinona-(4-2,2-dióxido + fomesafen (5-2-cloro-4-(trifluorometil-fenoxiN-metilsulfonil-2-nitrobenzamida + sethoxydim + óleo mineral, 0,25% v/v; E 150 g/ha de imazaquim (2-[4,5-dihidro-4-metil-4-(1-metiletil-5-oxo-1H-imidazol-2-ilo]-3-quinolinacarboxílico pré-e e 230 g/ha de sethoxydim + óleo mineral, 0,25% v/v; F 250 g/ha de fomesafen + 187 g/ha de fluazipop-p-butil (butil-(R-2-(4-(5-trifluorometil-2-piridiloxi-fenoxi-propionato + surfactante a 0,2% v/v; G 120 g/ha de imazethapyr + surfactante a 0,2% v/v; H testemunha capinada; I testemunha não capinada. O delineamento experimental foi de blocos ao acaso, com quatro repetições. O capim-custódio (Pennisetum setosum (Swartz L. Rich foi eficientemente controlado por todos os tratamentos químicos, enquanto a falsa-serralha (Emilia sonchifolia DC. foi somente pelo tratamento D. O capim-carrapicho (Cenchrus echinatus L. por C, D, E e F. O joá-de-capote (Nicandra physaloides (L. Pers. por D.F. e G. Ocorreram injúrias iniciais às plantas de soja, nos tratamentos D, E. e F. As alturas de plantas e de inserção da primeira vagem, além do rendimento de grãos, não foram influenciados significativamente pelos herbicidas.An experiment was carried out in Serranópolis, State of Goiás, Brazil, aiming to evaluate herbicides efficiency in weeds control

  3. Development of skin structure and cutaneous water loss in nestling desert house sparrows from Saudi Arabia.

    Science.gov (United States)

    Groff, Brandon; Muñoz-Garcia, Agustí; Yamaguchi, Mamoru; Williams, Joseph B

    2007-06-01

    The outer layer of the epidermis, the stratum corneum (SC), contains lipids and corneocytes, which together form layers that limit cutaneous water loss (CWL). We examined the development of structure of the SC and CWL in nestling House Sparrows (Passer domesticus) from Saudi Arabia. We measured CWL of nestlings, and characterized development of their epidermis using electron microscopy. We tested two antagonistic hypotheses, that CWL decreases as nestlings age, a response to increased thickness of SC, and an opposite idea that CWL increases as nestlings age even though the number of layers of the SC remains constant. CWL of nestling House Sparrows varied with developmental stages, in a non-linear fashion, but not significantly so. CWL of nestlings averaged 7.31+/-1.5 g H(2)O/(m(2) h), whereas for adults it was 4.95 g/(m(2) h); adult CWL was 67.7% that of nestlings. We found that morphology of the SC did not change linearly with age, but seemed to vary with developmental stage. CWL decreased as the SC thickness increased and as the total thickness of the corneocytes increased. Further, we found that CWL decreased as the thickness of the extracellular space increased, number of corneocytes increased, and proportion of the SC that is extracellular space increased.

  4. Oxidation behaviour of plutonium rich (U, Pu)C and (U, Pu)O{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Sali, S.K., E-mail: sksali@barc.gov.in [Fuel Chemistry Division (India); Kulkarni, N.K.; Phatak, Rohan [Fuel Chemistry Division (India); Agarwal, Renu [Product Development Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2016-10-15

    Oxidation behaviour of (U{sub 0.3}Pu{sub 0.7})C{sub 1.06} was investigated in air by heating samples up to 1073 K and 1273 K. Thermogravimetry (TG) of the samples and X-ray powder diffraction (XRD) of the intermediate products were used to understand the phenomenon taking place during this process. Theoretical calculations were carried out to understand the multiple phase changes taking place during oxidation of carbide. Theoretical results were validated by XRD analysis of the products obtained at different stages of oxidation. The final oxidized products were found to be a single FCC phase with O/M = 2.15 (M = U + Pu). Oxidation kinetic studies of (U{sub 0.3}Pu{sub 0.7})O{sub 2} and (U{sub 0.47}Pu{sub 0.53})O{sub 2} were carried out in dry air, using thermogravimetry, under non-isothermal conditions. The activation energy of oxidation was found to be 49 and 70 kJ/mol, respectively. Lattice parameter dependence on Pu/M and O/M of plutonium rich mixed oxide (MOX) was established using combined results of XRD and TG analysis of (U{sub 0.3}Pu{sub 0.7})O{sub 2+x} and (U{sub 0.47}Pu{sub 0.53})O{sub 2+x}.

  5. Construction of Neural Networks for Realization of Localized Deep Learning

    Directory of Open Access Journals (Sweden)

    Charles K. Chui

    2018-05-01

    Full Text Available The subject of deep learning has recently attracted users of machine learning from various disciplines, including: medical diagnosis and bioinformatics, financial market analysis and online advertisement, speech and handwriting recognition, computer vision and natural language processing, time series forecasting, and search engines. However, theoretical development of deep learning is still at its infancy. The objective of this paper is to introduce a deep neural network (also called deep-net approach to localized manifold learning, with each hidden layer endowed with a specific learning task. For the purpose of illustrations, we only focus on deep-nets with three hidden layers, with the first layer for dimensionality reduction, the second layer for bias reduction, and the third layer for variance reduction. A feedback component is also designed to deal with outliers. The main theoretical result in this paper is the order O(m-2s/(2s+d of approximation of the regression function with regularity s, in terms of the number m of sample points, where the (unknown manifold dimension d replaces the dimension D of the sampling (Euclidean space for shallow nets.

  6. Sapflow and water use of freshwater wetland trees exposed to saltwater incursion in a tidally influenced South Carolina watershed

    Science.gov (United States)

    Krauss, K.W.; Duberstein, J.A.

    2010-01-01

    Sea-level rise and anthropogenic activity promote salinity incursion into many tidal freshwater forested wetlands. Interestingly, individual trees can persist for decades after salt impact. To understand why, we documented sapflow (Js), reduction in Js with sapwood depth, and water use (F) of baldcypress (Taxodium distichum (L.) Rich.) trees undergoing exposure to salinity. The mean Js of individual trees was reduced by 2.8 g H2O??m-2??s-1 (or by 18%) in the outer sapwood on a saline site versus a freshwater site; however, the smallest trees, present only on the saline site, also registered the lowest Js. Hence, tree size significantly influenced the overall site effect on Js. Trees undergoing perennial exposure to salt used greater relative amounts of water in outer sapwood than in inner sapwood depths, which identifies a potentially different strategy for baldcypress trees coping with saline site conditions over decades. Overall, individual trees used 100 kg H2O??day-1 on a site that remained relatively fresh versus 23.9 kg H2O??day-1 on the saline site. We surmise that perennial salinization of coastal freshwater forests forces shifts in individual-tree osmotic balance and water-use strategy to extend survival time on suboptimal sites, which further influences growth and morphology.

  7. An implicit multigrid algorithm for computing hypersonic, chemically reacting viscous flows

    International Nuclear Information System (INIS)

    Edwards, J.R.

    1996-01-01

    An implicit algorithm for computing viscous flows in chemical nonequilibrium is presented. Emphasis is placed on the numerical efficiency of the time integration scheme, both in terms of periteration workload and overall convergence rate. In this context, several techniques are introduced, including a stable, O(m 2 ) approximate factorization of the chemical source Jacobian and implementations of V-cycle and filtered multigrid acceleration methods. A five species-seventeen reaction air model is used to calculate hypersonic viscous flow over a cylinder at conditions corresponding to flight at 5 km/s, 60 km altitude and at 11.36 km/s, 76.42 km altitude. Inviscid calculations using an eleven-species reaction mechanism including ionization are presented for a case involving 11.37 km/s flow at an altitude of 84.6 km. Comparisons among various options for the implicit treatment of the chemical source terms and among different multilevel approaches for convergence acceleration are presented for all simulations

  8. INHOMOGENEOUS NEARLY INCOMPRESSIBLE DESCRIPTION OF MAGNETOHYDRODYNAMIC TURBULENCE

    International Nuclear Information System (INIS)

    Hunana, P.; Zank, G. P.

    2010-01-01

    The nearly incompressible theory of magnetohydrodynamics (MHD) is formulated in the presence of a static large-scale inhomogeneous background. The theory is an inhomogeneous generalization of the homogeneous nearly incompressible MHD description of Zank and Matthaeus and a polytropic equation of state is assumed. The theory is primarily developed to describe solar wind turbulence where the assumption of a composition of two-dimensional (2D) and slab turbulence with the dominance of the 2D component has been used for some time. It was however unclear, if in the presence of a large-scale inhomogeneous background, the dominant component will also be mainly 2D and we consider three distinct MHD regimes for the plasma beta β > 1. For regimes appropriate to the solar wind (β 2 s δp is not valid for the leading-order O(M) density fluctuations, and therefore in observational studies, the density fluctuations should not be analyzed through the pressure fluctuations. The pseudosound relation is valid only for higher order O(M 2 ) density fluctuations, and then only for short-length scales and fast timescales. The spectrum of the leading-order density fluctuations should be modeled as k -5/3 in the inertial range, followed by a Bessel function solution K ν (k), where for stationary turbulence ν = 1, in the viscous-convective and diffusion range. Other implications for solar wind turbulence with an emphasis on the evolution of density fluctuations are also discussed.

  9. Effects of Foliar Application of Nano Zinc Chelate and Zinc Sulfate on Zinc Content, Pigments and Photosynthetic Indices of Holy Basil (Ocimum sanctum(

    Directory of Open Access Journals (Sweden)

    Zohreh Moghimi pour

    2017-02-01

    Full Text Available Introduction: Holy basil is a perennial plant belongs to Lamiaceae family. The plant is a perennial and thrives well in the hot and humid climate. Its aerial parts have been in use for food, pharmaceuticals, cosmetics and perfumery industries. Leaves contain 0.5-1.5% essential oil and main oil components are eugenol, methyl eugenol, carvacrol, methyl chavicol and1,8-cineole. A balanced fertilization program with macro and micronutrients is very important in producing high quality yield. Zinc is involved in IAA production, chlorophyll biosynthesis, carbon assimilation, saccharids accumulation, reactive oxygen radicals scavenging and finally carbon utilization in volatile oil biosynthesis. Material and methods: In order to evaluate the effect on zinc foliar application on zinc content of leaves, photosynthetic indices and pigments of holy basil, an experiment was carried out in 2013 at a research farm of Horticultural Science, Shahid Chamran University (31°20'N latitude and 48°40'E longitude and 22.5 m mean sea level, Ahvaz (Iran, a region characterized by semi-dry climate. The experiment was arranged based on Randomized Complete Block Design (RCBD with six treatments and three replications. The treatments were nano zinc chelate (0, 0.5, 1 and 1.5 g.l-1 and zinc sulfate (1 and 1.5 g.l-1 fertilizers. Land preparation includes disking and the formation of raising beds (15cm high and 45cm wide across the top using a press-pan-type bed shaper. Holy basil seeds were sown on two rows on each bed, with 15 cm in-row and 40 cm between-row spacing. The plants were irrigated weekly as needed. Foliar application of zinc fertilizers was done at six-eight leaf stage and were repeated with interval 15 days until full bloom stage. Zinc content, stomata conductance (gs, CO2 under stomata (Ci, transpiration rate (E, net photosynthesis (Pn, light use efficiency (LUE, water use efficiency (WUE and also chlorophyll a, chlorophyll b, chlorophyll a+b and carotenoid contents were measured at beginning of flowering stage. Photosynthetic parameters were measured by Infra-red gas analyzer (LCA4, ADC Co. Ltd., Hoddesdon, UK. Instantaneous water use efficiency (WUEinst was calculated as Pn/E ratio. Light use efficiency was calculated as Pn/PPFD ratio. Result and discussion: The results showed that the effect of foliar application of zinc fertilizers on all measured traits except Ci and WUE was significant (p≥0.01. The highest values of zinc content (110.53 mg.kg-1, chlorophyll a (0.99 mg.kg-1 fresh weight, chlorophyll b (0.30 mg.kg-1 fresh weight, chlorophyll a+b (1.29 mg.kg-1 fresh weight and carotenoid (0.18 mg.kg-1 fresh weight traits were obtained in plants sprayed with 1.5 g.l-1 nano zinc chelate. The lowest amount of zinc content (21.37 mg.kg-1, chlorophyll a (0.58 mg.kg-1 fresh weight, chlorophyll b (0.14 mg.kg-1 fresh weight, chlorophyll a+b (0.72 mg.kg-1 fresh weight and carotenoid (0.13 mg.kg-1 fresh weight traits were obtained in control plants. Foliar application of holy basil with 1.5 g.l-1 nano zinc chelate led to increase in stomata conductance (322.22 mm H2O.m-2.s-1, transpiration rate (2.86 mm H2O.m-2.s-1, net photosynthesis (11.75 μm CO2.m-2.s-1 and light use efficiency (6.10 μm CO2. μm photon-1. The minimum amount of stomata conductance (172.00 mm H2O.m-2.s-1, transpiration rate (2.16 mm H2O.m-2.s-1, net photosynthesis (8.23 μm CO2.m-2.s-1 and light use efficiency (4.46 μm CO2. μm photon-1 were observed in control plants. There were positive correlation (p≥0.01 between zinc content and chlorophyll a, chlorophyll b, chlorophyll a+b and carotenoid. Zinc content also had positive and significant correlation (p≥0.01 with stomata conductance, CO2 under stomata, transpiration rate, net photosynthesis and light use efficiency. So, providing zinc by foliar application with 1 and 1.5 g.l-1 nano zinc chelate and 1.5 g.l-1 zinc sulfate can lead to increase in chlorophyll and carotenoid contents. Increase in net photosynthesis may be due to higher photosynthesis pigments and also stomata conductance and CO2 under stomata. In the other hand, zinc is an essential micronutrient that acts either as a metal component of various enzymes or as a functional, structural, or regulatory cofactor such as carbonic anhydrase, ribulose 1, 5-bisphosphate carboxylase/oxygenase and fructose-1, 6-bisphosphate, and is thus associated with saccharide metabolism and photosynthesis. Conclusion: Although the highest amount of most measured traits was obtained in plants that treated with 1.5 g.l-1 nano zinc chelate, there were no significant difference between 1 and 1.5 g.l-1 nano zinc chelate and 1.5 g.l-1 zinc sulfate treatments for zinc content, stomata conductance, CO2 under stomata, transpiration rate, net photosynthesis, water use efficiency and light use efficiency. Therefore, in order to increase zinc content and photosynthetic traits of holy basil, foliar application of with 1.5 g.l-1 zinc sulfate is recommended.

  10. Differential diagnosis between secondary hyperparathyroidism and aluminum intoxication in uremic patients: Usefulness of 99mTc-pyrophosphate bone scintigraphy

    International Nuclear Information System (INIS)

    Kinnaert, P.; Van Hooff, I.; Schoutens, A.

    1989-01-01

    Forty-one patients in chronic end-stage renal failure and 4 patients with a functioning kidney transplant presented with spontaneous hypercalcemia or intolerance to vitamin D3 sterols and/or oral calcium supplements. Bone iliac crest biopsy with aluminum staining and Tc-pyrophosphate bone scintigraphy with determination of Fogelman score were performed in all cases. Two patients had aluminum-induced osteomalacia (AL O). Thirty-eight biopsies showed renal osteodystrophy (secondary hyperparathyroidism or various combinations of osteitis fibrosa and osteomalacia): 19 with positive staining for aluminum (RO + AL) and 19 without aluminum deposits (RO). The series also comprised 2 cases of pure osteomalacia (OM), 2 cases of osteoporosis (OP), and 1 case of osteoporosis with aluminum accumulation (OP + AL). Mean Fogelman score in RO patients (9.1 +/- 0.3) was significantly higher than in all other categories (5.9 +/- 0.5 for RO + AL, and scores ranging from 0 to 8 in the last 7 patients, p less than 0.01). Patients with massive aluminum accumulation in bone (greater than 75% of the total trabecular surface) showed no or very low uptake of the isotope by the skeleton. Fogelman scores of 9 or higher were always associated with histological secondary hyperparathyroidism. 99m Tc-pyrophosphate bone scintigraphy is helpful to distinguish aluminum intoxication from secondary hyperparathyroidism in uremic patients

  11. A poliomyelitis model through mucosal infection in transgenic mice bearing human poliovirus receptor, TgPVR21

    International Nuclear Information System (INIS)

    Nagata, Noriyo; Iwasaki, Takuya; Ami, Yasushi; Sato, Yuko; Hatano, Ikuyoshi; Harashima, Ayako; Suzaki, Yuriko; Yoshii, Takao; Hashikawa, Tsutomu; Sata, Tetsutaro; Horiuchi, Yoshinobu; Koike, Satoshi; Kurata, Takeshi; Nomoto, Akio

    2004-01-01

    Transgenic mice bearing the human poliovirus receptor (TgPVR) are less susceptible to oral inoculation, although they are susceptible to parenteral inoculation. We investigated the susceptibility of TgPVR 21 line [Arch. Virol. 130 (1994) 351] to poliovirus through various mucosal routes. Intranasal inoculation of a neurovirulent Mahoney strain (OM1) caused flaccid paralysis with viral replication in the central nervous system at a dose of 10 6 cell culture infectious dose (CCID 50 ), in contrast, no paralysis following oral or intragastric inoculation of the same dose. Intranasal inoculation of a vaccine strain, Sabin 1, at 10 6 CCID 50 , resulted in no paralysis. Initial replication of poliovirus in the nasal cavity was confirmed by virus isolation and detection of negative-stranded replicative intermediates by RT-PCR and viral antigens using a high-sensitive immunohistochemistry and genome/transcripts by in situ hybridization. Poliovirus-specific IgG antibodies were elevated in the sera of surviving TgPVR21. This model can be used as a mucosal infection model and for differentiation of neurovirulent and attenuated poliovirus strains

  12. Measurement of the optical fiber numeric aperture exposed to thermal and radiation aging

    Science.gov (United States)

    Vanderka, Ales; Bednarek, Lukas; Hajek, Lukas; Latal, Jan; Poboril, Radek; Zavodny, Petr; Vasinek, Vladimir

    2016-12-01

    This paper deals with the aging of optical fibers influenced by temperature and radiation. There are analyzed changes in the structure of the optical fiber, related to the propagation of light in the fiber structure. In this case for numerical aperture. For experimental measurement was used MM fiber OM1 with core diameter 62.5 μm, cladding diameter 125 μm in 2.8 mm secondary coating. Aging of the optical fiber was achieved with dry heat and radiation. For this purpose, we were using a temperature chamber with a stable temperature of 105 °C where the cables after two months. Cables were then irradiated with gamma radiation 60Co in doses of 1.5 kGy and then 60 kGy. These conditions simulated 50 years aging process of optical cables. According to European Standard EN 60793-1-43:2015 was created the automatic device for angular scan working with LabVIEW software interface. Numerical aperture was tested at a wavelength of 850 nm, with an output power 1 mW. Scanning angle was set to 50° with step 0.25°. Numerical aperture was calculated from the position where power has fallen from maximal power at e2 power. The measurement of each sample was performed 10 hours after thermal and radiation aging. The samples were subsequently tested after six months from the last irradiation. In conclusion, the results of the experiment were analyzed and compared.

  13. NEREDA Pilot Studies 2003 - 2010; NEREDA Pilotonderzoeken 2003 - 2010

    Energy Technology Data Exchange (ETDEWEB)

    Berkhof, D.; De Bruin, B.; Kerstholt, M.; Kraan, R.; Miska, V.; Peeters, T.; Van der Roest, H.; Verschoor, J. [DHV, Amersfoort (Netherlands); De Kreuk, M.; Van Loosdrecht, M. [Technische Universiteit Delft TUD, Delft (Netherlands)

    2010-10-15

    Since the nineties of last century research has been conducted on the development of the aerobic granular sludge technology for wastewater treatment. A first STOWA pilot research project was executed at Ede, Netherlands. In 2005 a technological breakthrough was accomplished and was the starting sign for a broader national development program (NNOP). Next to STOWA, Delft University of Delft and DHV, six Waterboards are involved within this development program. Main goal of the NNOP is to develop a new competitive biological wastewater treatment technology (Nereda). After the Ede project additional pilot research projects were conducted at four locations in the Netherlands. Within these pilot research projects the following aspects were investigated: granulation on different wastewater types; stability of granular sludge; optimization of nitrogen and phosphate removal, especially during winter time; control of effluent suspended solids concentration; and obtain technological design parameters for full scale WWTPs (waste water treatment plants) [Dutch] In dit rapport staan de resultaten beschreven van de tussen 2003 en 2010 uitgevoerde pilots met de aeroob-korrelslibtechnologie Nereda. Dit is een nieuwe zuiveringstechnologie waarbij het reinigende actief slib geen vlokken maar korrels vormt. Hierdoor bezinkt het slib sneller en makkelijker. De technologie wordt gekenmerkt door hoge zuiveringsrendementen, weinig ruimtebeslag (voor bezinking) en relatief lage energiekosten. De resultaten van de pilots zijn dermate goed, dat drie van de vijf deelnemende waterschappen hebben besloten om 1 van hun rwzi's (rioolwaterzuiveringsinstallaties) aan te passen op basis van de Nereda-technologie.

  14. Time-space trade-offs for lempel-ziv compressed indexing

    DEFF Research Database (Denmark)

    Bille, Philip; Ettienne, Mikko Berggren; Gørtz, Inge Li

    2017-01-01

    Given a string S, the compressed indexing problem is to preprocess S into a compressed representation that supports fast substring queries. The goal is to use little space relative to the compressed size of S while supporting fast queries. We present a compressed index based on the Lempel-Ziv 1977...... compression scheme. Let n, and z denote the size of the input string, and the compressed LZ77 string, respectively. We obtain the following time-space trade-offs. Given a pattern string P of length m, we can solve the problem in (i) O (m + occ lg lg n) time using O(z lg(n/z) lg lg z) space, or (ii) (m (1...... best space bound, but has a leading term in the query time of O(m(1 + lgϵ z/lg(n/z))). However, for any polynomial compression ratio, i.e., z = O(n1-δ), for constant δ > 0, this becomes O(m). Our index also supports extraction of any substring of length ℓ in O(ℓ + lg(n/z)) time. Technically, our...

  15. Cascading influence of inorganic nitrogen sources on DOM production, composition, lability and microbial community structure in the open ocean.

    Science.gov (United States)

    Goldberg, S J; Nelson, C E; Viviani, D A; Shulse, C N; Church, M J

    2017-09-01

    Nitrogen frequently limits oceanic photosynthesis and the availability of inorganic nitrogen sources in the surface oceans is shifting with global change. We evaluated the potential for abrupt increases in inorganic N sources to induce cascading effects on dissolved organic matter (DOM) and microbial communities in the surface ocean. We collected water from 5 m depth in the central North Pacific and amended duplicate 20 liter polycarbonate carboys with nitrate or ammonium, tracking planktonic carbon fixation, DOM production, DOM composition and microbial community structure responses over 1 week relative to controls. Both nitrogen sources stimulated bulk phytoplankton, bacterial and DOM production and enriched Synechococcus and Flavobacteriaceae; ammonium enriched for oligotrophic Actinobacteria OM1 and Gammaproteobacteria KI89A clades while nitrate enriched Gammaproteobacteria SAR86, SAR92 and OM60 clades. DOM resulting from both N enrichments was more labile and stimulated growth of copiotrophic Gammaproteobacteria (Alteromonadaceae and Oceanospirillaceae) and Alphaproteobacteria (Rhodobacteraceae and Hyphomonadaceae) in weeklong dark incubations relative to controls. Our study illustrates how nitrogen pulses may have direct and cascading effects on DOM composition and microbial community dynamics in the open ocean. © 2017 Society for Applied Microbiology and John Wiley & Sons Ltd.

  16. Proyecto técnico preliminar para un laboratorio de materiales de referencia químico

    Directory of Open Access Journals (Sweden)

    Ramón Arango Caraballo

    2013-12-01

    Full Text Available En la industria farmacéutica, los materiales de referencia químico son imprescindibles en las actividades de control de la calidad y en los procesos de aseguramiento de las diferentes producciones que se realizan. Estos permiten evaluar las características de las materias primas que intervienen en los procesos productivos y de los medicamentos que resultan de la producción, por lo que establecen la trazabilidad y confiabilidad de los resultados obtenidos. Este estudio presenta los pasos o aspectos técnico económicos necesarios, para el diseño conceptual de un laboratorio de producción de materiales de referencia químicos de trabajo en Cuba. Se describen las principales características de la edificación, las facilidades y equipamiento que debe existir en cada uno de ellos, así como el flujo de personal, materiales, productos y desechos de la producción, según establecen las regulaciones de buenas prácticas de fabricación de la Organización Mundial de la Salud (OMS [1], adaptadas a las condiciones de un local existente.

  17. Geochronological and thermochronological constraints on porphyry copper mineralization in the Domeyko alteration zone, northern Chile Determinaciones geocronológicas y termocronológicas para la mineralización de cobre porfídico en la zona de alteración de Domeyko, norte de Chile

    Directory of Open Access Journals (Sweden)

    Víctor Maksaev

    2010-01-01

    partial retention zone (~85-40°C during the Eocene. These ages correspond to the exhumation of the porphyry, and the latter provides a maximum age for the supergene enrichment processes that formed the chalcocite blanket currently mined at Dos Amigos.En Domeyko, a 40 km al sur de la ciudad de Vallenar, en el norte de Chile (28°57'S-70°53'O, se ubican los pórfidos cupríferos Dos Amigos y Tricolor dentro de una zona de alteración hidrotermal elongada en sentido norte-sur de 6x1,5 km. Estos están relacionados con stocks porfídicos tonalíticos a granodioríticos con alteración potásica, rodeados por zonas de alteraciones sericítica, caolinita-illita y propilítica, las cuales afectaron principalmente rocas volcánicas del Cretácico Inferior. El límite oeste de la zona de alteración lo constituye el Batolito Cachiyuyo postmineral de composición granodiorítica a diorítica. Edades U-Pb en circón para el pórfido Dos Amigos son de 106,1±3,5 Ma y 104,0±3,5 Ma y de 108,5±3,4 Ma para el pórfido Tricolor. El Batolito Cachiyuyo adyacente dio edades U-Pb en circón de 99,6±1,9 y 99,1±1,9 Ma y edades 40Ar/39Ar en biotita de 96,9±3,9 y 94,8±0,9 Ma. De acuerdo a estas edades el emplazamiento del batolito fue posterior a los pórfidos Dos Amigos y Tricolor, consistente con las relaciones geológicas. Aunque la mineralización de cobre está relacionada espacialmente y genéticamente con los stocks porfídicos del Cretácico Inferior (Albiano, la mayoría de las micas datadas de los pórfidos Dos Amigos y Tricolor dieron edades 40Ar/39Ar entre 97,1±2,5 y 96,0±1,4 Ma, las cuales son coincidentes con las edades de enfriamiento obtenidas para el batolito. La datación 40Ar/39Ar por pasos de micas reveló una importante perturbación del sistema isotópico K-Ar de las mismas, lo que complica una determinación exacta de la edad de la actividad hidrotermal en Domeyko, pero los datos 40Ar/39Ar establecen con certeza una edad mínima Cretácico Tardío para ella. Una

  18. The guava tree as bioindicator during the process of fuel replacement of an oil refinery.

    Science.gov (United States)

    Silva, Simone F; Meirelles, Sérgio T; Moraes, Regina M

    2013-05-01

    This study was performed to verify whether the exchange of the fuel used in the boilers of a crude oil refinery located in Cubatão (SE Brazil) would result in alterations on gas exchange, growth and leaf injuries in saplings of Psidium guajava 'Paluma'. The purpose of the refinery was to reduce the SO2 emission, but using natural gas as fuel could increase the concentrations of O3 precursors in the atmosphere. Thus a biomonitoring was performed with a native species sensitive to O3. The plants were exposed in five areas (CM1, CM5, CEPEMA, Centro, and RP) at different distances to the refinery, both before and after the fuel exchange. We performed six exposures under environmental conditions, with length of ca. 90 days each. With the utilization of natural gas, the saplings presented reductions in carbon assimilation rate under saturating light conditions (Asat, μmolCO2m(-2)s(-1)) and the stomatal conductance (gs, molH2Om(-2)s(-1)), and increase in height, number of leaves, and dry mass of leaves and shoots. There were also reductions in root dry mass and in the root/shoot ratio. The saplings also presented O3-induced leaf injuries. The responses of P. guajava 'Paluma' were altered after the fuel exchange as a result of a new combination of pollutants in the atmosphere. The fuel exchange has not resulted in environmental benefit to the surrounding forest; it has only altered the contamination profile of the region. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. [Sagittal otolith morphology and the relationship between its mass and the age of Liza haematocheila in the Yangtze Estuary, China].

    Science.gov (United States)

    Ji, Yan; Zhao, Feng; Yang, Qin; Ma, Rong Rong; Yang, Gang; Zhang, Tao; Zhuang, Ping

    2018-03-01

    To examine the relationship of morphological characters of sagittal otolith and the age of Liza haematocheila in the Yangtze Estuary, we analyzed the morphological parameters of 324 pairs of otoliths extracted from 358 L. haematocheila specimens from the Yangtze Estuary in February to June of 2017. The results showed that sagittal otolith had rostrum, antirostrum and obvious central notch. The size and shape of sagittal otolith significantly changed with their growth, from regular melon seeds shape outline to long narrow leaf shape and increasing irregular wavy outline. The average density of sagittal otolith was 1.52 mg·mm -2 . The average rectangularity was 0.68. The length of sagittal otolith was 0.021%-0.047% of entire body length (BL), the width was 0.009%-0.021% of entire BL, and the mass was 0.045‰-0.731‰ of the entire body mass (BM). Otolith length (OL), otolith width (OW) and otolith mass (OM) were all significantly related to the BL, with the determination coefficient for OW and OM model being the highest (R 2 =0.928). The relationship between OM and BL was described best by exponential regression: OM=0.0009BL 1.8737 (R 2 =0.967). The relationships between OM and age (A), BL and A were well fitted by multinomial regressions, respectively: OM=2.9262A 2 +4.8437A+2.1894 (R 2 =0.847), BL=-3.2248A 2 +102.54A+38.373 (R 2 =0.858). In addition, OM was linearly correlated with A. The estimated otolith's ages from the model did not significantly variate from the real ages counting from annulus counts. Therefore, OM could be an effective parameter for the age estimation of L. haematocheila.

  20. Preliminary results of laser-assisted sealing of hand-sewn canine esophageal anastomoses

    Science.gov (United States)

    Auteri, Joseph S.; Oz, Mehmet C.; Sanchez, Juan A.; Bass, Lawrence S.; Jeevanandam, Valluvan; Williams, Matthew R.; Smith, Craig R.; Treat, Michael R.

    1991-07-01

    Dehiscence rates of esophageal anastomoses range between 5 and 20%. Causative factors include ischemia, tension, foreign body reaction, microabscesses, and the negative pressure within the thoracic cavity. Laser assisted tissue sealing (LATS) has been shown to decrease anastomotic leakage rates in other tissues. Using a canine model the efficacy of LATS in enhancing single layer hand swen intrathoracic esophageal anastomoses was assessed. Via a left thoracotomy, paired two centimeter transverse incisions (one laser sealed, one control) were made in the proximal and distal esophagus in nine dogs. Both were sewn using a single layer of 4-0 polyglycolic acid. A combination of albumin (0.2 cc), sodium hyaluronate (0.4 cc), and indocyanine green (1 gtt) was applied to one of the randomly chosen hand sewn repairs. The albumin/hyaluronate combination is used to provide a protein matrix across the anastomosis for ingrowth of fibroblasts. Indocyanine green dye selectively absorbs at OM805 nm which matches the output of the diode laser (808 +/- 1 nm), thus improving uptake of laser energy by the targeted tissues. The anastomosis was then exposed to continuous wave diode laser energy for OM2 minutes at a power density of 9.6 W/cm2. The esophagus was recovered either at the time of sealing or two days postoperatively and infused with saline under pressure. Bursting pressures were considered the point of initial saline leakage. At time 0 there was no significant difference in bursting pressures between the LATS group and controls. However, at two days postoperatively controls burst at 121 +/- 14 mmHg while the laser assisted anastomoses burst at 295 +/- 35 mmHg (p anastomoses revealed minimal thermal injury to the mucosal surface initially, with some regeneration of mucosal lining at two days postoperatively. No foreign body reaction to the solder was noted. Laser reinforcement of single layer hand sewn esophageal anastomoses appears to increase bursting pressure and may result

  1. Determinantes estructurales y su relación con el índice de COP en países de desarrollo alto, mediano y bajo

    Directory of Open Access Journals (Sweden)

    Luis Carlos García Rincón

    2015-01-01

    Full Text Available Objetivo: describir y analizar los determinantes estructurales y su relación con el índice de COP en países de desarrollo alto, mediano y bajo durante las últimas tres décadas. Materiales y métodos: estudio descriptivo realizado a partir de una revisión de la literatura internacional y nacional en bases de datos y páginas web. Resultados: se encontró un país con índice de COP elevado; un país con índice de COP moderado; 10 países con índice de COP bajo; y 10 países con índice de COP muy bajo. Los países de desarrollo alto y los países de desarrollo bajo se comportan de manera similar en tanto reportan índices de COP inferiores al promedio mundial sugerido por la OMS (2.4. Discusión y conclusiones: se concluye que los valores de COP están asociados fuertemente a factores macroeconómicos, como las políticas y servicios de cuidado de la salud disponibles para la población, más que a la clasificación de desarrollo del Banco Mundial. Los determinantes sociales están directamente relacionados con las políticas estructurales que afectan el bienestar social, la salud y la calidad de vida de la población.

  2. Thermoelectric misfit-layered cobalt oxides with interlayers of hydroxide and peroxide species

    Science.gov (United States)

    Chou, Ta-Lei; Lybeck, Jenni; Chan, Ting-Shan; Hsu, Ying-Ya; Tewari, Girish C.; Rautama, Eeva-Leena; Yamauchi, Hisao; Karppinen, Maarit

    2013-12-01

    Among the thermoelectric misfit-layered cobalt oxides, [MmA2Om+2]qCoO2, the parent m=0 phases exhibit divergent chemical features but are less understood than the more common m>0 members of the series. Here we synthesize Sr-for-Ca substituted [(Ca1-xSrx)z(O,OH)2]qCoO2 zero phases up to x=0.2 through low-temperature hydrothermal conversion of precursor powders of the m=1 misfit system, [Co(Ca1-xSrx)2O3]qCoO2. In the zero-phase [(Ca1-xSrx)z(O,OH)2]qCoO2 system, as the Sr content x increases the lattice expands anisotropically along the c axis such that the ab-plane dimension and the misfit parameter q remain essentially constant. X-ray absorption spectroscopy data suggest the presence of peroxide-type oxygen species in the (Ca1-xSrx)z(O,OH)2 rock-salt block and together with infrared spectroscopy, thermogravimetric and low-temperature resistivity and thermopower measurements evidence that the isovalent Sr-for-Ca substitution controls the balance between the peroxide and hydroxide species in the (Ca1-xSrx)z(O,OH)2 block but leaves the valence of Co essentially intact in the CoO2 block. The higher electrical conductivity of the Sr-substituted phases is explained as a consequence of increased carrier mobility.

  3. Phenotypic subgroups of polycystic ovary syndrome have different intra-renal resistance symptoms.

    Science.gov (United States)

    Ciftci, Ceylan F; Uckuyu, Ayla; Karadeli, Elif; Turhan, Erdem; Toprak, Erzat; Ozcimen, Emel E

    2012-12-01

    The polycystic ovary syndrome (PCOS) is known to be related with increased metabolic and cardiovascular risks. Various phenotypic subgroups of PCOS have been proven to have metabolic and endocrine disorders with varying degrees of severity However, intra-renal vascular resistance, which is an indirect indication of atherosclerosis, remains unknown in PCOS subgroups. In this study we examined whether PCOS subgroups have different intra-renal resistance symptoms. 98 PCOS patients (diagnosed according to the Rotterdam criteria) 30 controls were included in the study The diagnosis of PCOS was established in the presence of at least two of the following criteria: 1-oligo and/or amenorrhea (OM); 2-clinic and/or biochemical signs of hyperandrogenism (HA); 3-polycystic ovarian morphology (PCO) detected by transvaginal ultrasonography 37 patients (Group 1) met all three criteria (HA+OM+PCO), 29 patients (Group 2) met two of the criteria including hyperandrogenism (HA+OM or HA+PCO) and the remaining 32 patients (Group 3) had no hyperandrogenism but fulfilled the other two criteria; PCO+OM. Renal Doppler ultrasonography and hormonal/biochemical analyses were carried out. The first outcome measure was designated as the differences in the renal resistive index (RRI) values of the groups, and the second outcome measure was designated as the relation of RRI with the insulin resistance and lipid profile. In Group 1, the RRI and the homeostasis model assessment of insulin resistance (HOMA-IR) values were significantly higher than in Group 3 and controls (P PCOS subgroups have metabolic and endocrine disorders and cardiovascular risks of varying degrees of severity Moreover, we showed that there was no increase of metabolic and cardiovascular risks in PCOS patients without hyperandrogenism.

  4. Synthesis, characterization and photocatalytic activity of porous manganese oxide doped titania for toluene decomposition

    International Nuclear Information System (INIS)

    Jothiramalingam, R.; Wang, M.K.

    2007-01-01

    The present study describes the photocatalytic degradation of toluene in gas phase on different porous manganese oxide doped titanium dioxide. As synthesized birnessite and cryptomelane type porous manganese oxide were doped with titania and tested for photocatalytic decomposition of toluene in gas phase. The effects of the inlet concentration of toluene, flow rate (retention time) were examined and the relative humidity was maintained constantly. Thermal and textural characterization of manganese oxide doped titania materials were characterized by X-ray diffraction (XRD), thermogravemetry (TG), BET and TEM-EDAX studies. The aim of the present study is to synthesize the porous manganese oxide doped titania and to study its photocatalytic activity for toluene degradation in gas phase. Cryptomelane doped titania catalyst prepared in water medium [K-OMS-2 (W)] is shown the good toluene degradation with lower catalysts loading compared to commercial bulk titania in annular type photo reactor. The higher photocatalytic activity due to various factors such as catalyst preparation method, experimental conditions, catalyst loading, surface area, etc. In the present study manganese oxide OMS doped titania materials prepared by both aqueous and non-aqueous medium, aqueous medium prepared catalyst shows the good efficiency due to the presence of OH bonded groups on the surface of catalyst. The linear forms of different kinetic equations were applied to the adsorption data and their goodness of fit was evaluated based on the R 2 and standard error. The goodness to the linear fit was observed for Elovich model with high R 2 (≥0.9477) value

  5. Factors influencing on the bioaccessibility of polybrominated diphenyl ethers in size-specific dust from air conditioner filters.

    Science.gov (United States)

    Yu, Yingxin; Yang, Dan; Wang, Xinxin; Huang, Ningbao; Zhang, Xinyu; Zhang, Dongping; Fu, Jiamo

    2013-11-01

    Size-specific concentrations and bioaccessibility of polybrominated diphenyl ethers (PBDEs) in dust from air conditioner filters were measured, and the factors influencing the PBDE bioaccessibility were determined. Generally, the PBDE concentrations increased with decreasing dust particle size, and BDE209 (deca-BDE) was generally the predominant congener. The bioaccessibility ranged from 20.3% to 50.8% for tri- to hepta-BDEs, and from 5.1% to 13.9% for BDE209 in dust fractions of varied particle size. The bioaccessibility of most PBDE congeners decreased with increasing dust particle size. The way of being of PBDE (adsorbed to dust surface or incorporated into polymers) in dust significantly influenced the bioaccessibility. There was a significant negative correlation between the tri- to hepta-BDE bioaccessibility and organic matter (OM) contents in dust. Furthermore, tri- to hepta-BDE bioaccessibility increased with increasing polarity of OMs, while with decreasing aromaticity of OMs. The tri- to hepta-BDE bioaccessibility significantly positively correlated with the surface areas and pore volumes of dust. Using multiple linear regression analysis, it was found that the OM contents and pore volumes of dust were the most important factors to influence the tri- to hepta-BDE bioaccessibility and they could be used to estimate the bioaccessibility of tri- to hepta-BDEs according to the following equation: bioaccessibility (%)=45.05-0.49 × OM%+1.79 × pore volume. However, BDE209 bioaccessibility did not correlate to any of these factors. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Epidemiology and Outcome of Major Congenital Malformations in a Large German County.

    Science.gov (United States)

    Wittekindt, Boris; Schloesser, Rolf; Doberschuetz, Nora; Salzmann-Manrique, Emilia; Grossmann, Jasmin; Misselwitz, Bjoern; Rolle, Udo

    2018-05-01

     Congenital malformations are associated with substantial neonatal morbidity and mortality. Furthermore, only sparse data are available on the modalities of care provided to and the associated clinical outcomes in affected neonates. In this study, we focused on five malformations that require surgery during the neonatal period: duodenal stenosis and atresia (DA), gastroschisis (GA), omphalocele (OM), congenital diaphragmatic herniation (CDH), and esophageal atresia (EA).  We reviewed the Hessian neonatal registry (2010-2015) to identify records including the ICD-10 (International Classification of Diseases, Tenth Edition) codes for the aforementioned diagnoses and identified 283 patients who were affected by at least one of these conditions. Multiple regression analyses were performed to further identify risk factors for mortality and extended length of hospital stay.  The incidence rates per 10,000 live births and inhospital mortality rates were as follows: DA: 1.79 and 3.6%; GA: 1.79 and 1.8%; OM: 1.60 and 24%; CDH: 1.32 and 27.5%; and EA: 2.67 and 11.1%, respectively. Thirty-three percent of the patients had not been born in a perinatal center in which corrective surgeries were performed. The following risk factors were significantly associated with early mortality: trisomy 13 and 18, congenital heart defects, prematurity, and high-risk malformations (OM and CDH). The predictors of length of stay were as follows: gestational age, number of additional malformations, and treatment in the center with the highest patient volume.  Epidemiology and outcome of major congenital malformations in Hesse, Germany, are comparable to previously published data. In addition, our data revealed a volume-outcome association with regard to the length of hospital stay. Georg Thieme Verlag KG Stuttgart · New York.

  7. Co-occurrence analysis of microbial taxa in the Atlantic Ocean reveals high connectivity in the free-living bacterioplankton

    Directory of Open Access Journals (Sweden)

    Mathias eMilici

    2016-05-01

    Full Text Available We determined the taxonomic composition of the bacterioplankton of the epipelagic zone of the Atlantic Ocean along a latitudinal transect (51°S – 47°N using Illumina sequencing of the V5-V6 region of the 16S rRNA gene and inferred co-occurrence networks. Bacterioplankon community composition was distinct for Longhurstian provinces and water depth. Free-living microbial communities (between 0.22-3 µm were dominated by highly abundant and ubiquitous taxa with streamlined genomes (e.g. SAR11, SAR86, OM1, Prochlorococcus and could clearly be separated from particle-associated communities which were dominated by Bacteroidetes, Planktomycetes, Verrucomicrobia and Roseobacters. From a total of 369 different communities we then inferred co-occurrence networks for each size fraction and depth layer of the plankton between bacteria and between bacteria and phototrophic micro-eukaryotes. The inferred networks showed a reduction of edges in the deepest layer of the photic zone. Networks comprised of free-living bacteria had a larger amount of connections per OTU when compared to the particle associated communities throughout the water column. Negative correlations accounted for roughly one third of the total edges in the free-living communities at all depths, while they decreased with depth in the particle associated communities where they amounted for roughly 10% of the total in the last part of the epipelagic zone. Co-occurrence networks of bacteria with phototrophic micro-eukaryotes were not taxon-specific, and dominated by mutual exclusion (~60%. The data show a high degree of specialization to micro-environments in the water column and highlight the importance of interdependencies particularly between free-living bacteria in the upper layers of the epipelagic zone.

  8. The added value of dynamical downscaling in a climate change scenario simulation:A case study for European Alps and East Asia

    Science.gov (United States)

    Im, Eun-Soon; Coppola, Erika; Giorgi, Filippo

    2010-05-01

    Since anthropogenic climate change is a rather important factor for the future human life all over the planet and its effects are not globally uniform, climate information at regional or local scales become more and more important for an accurate assessment of the potential impact of climate change on societies and ecosystems. High resolution information with suitably fine-scale for resolving complex geographical features could be a critical factor for successful linkage between climate models and impact assessment studies. However, scale mismatch between them still remains major problem. One method for overcoming the resolution limitations of global climate models and for adding regional details to coarse-grid global projections is to use dynamical downscaling by means of a regional climate model. In this study, the ECHAM5/MPI-OM (1.875 degree) A1B scenario simulation has been dynamically downscaled by using two different approaches within the framework of RegCM3 modeling system. First, a mosaic-type parameterization of subgrid-scale topography and land use (Sub-BATS) is applied over the European Alpine region. The Sub-BATS system is composed of 15 km coarse-grid cell and 3 km sub-grid cell. Second, we developed the RegCM3 one-way double-nested system, with the mother domain encompassing the eastern regions of Asia at 60 km grid spacing and the nested domain covering the Korean Peninsula at 20 km grid spacing. By comparing the regional climate model output and the driving global model ECHAM5/MPI-OM output, it is possible to estimate the added value of physically-based dynamical downscaling when for example impact studies at hydrological scale are performed.

  9. Ten-year rollover of San Onofre inservice testing program for pumps and valves to OM-6 and OM-10

    International Nuclear Information System (INIS)

    Croy, P.A.; Fischetti, S.; Chiang, D.; Schofield, P.; Barney, D.

    1994-01-01

    The Pump and Valve Inservice Testing (IST) Program Sat San Onofre, Units 2 and 3, was updated for the second 120-month interval from August 1993 to April 1994. The U.S. Nuclear Regulatory Commission (USNRC) approved the OM-6 and OM-10 Codes in mid-1992. The project for the rollover to these new Codes included several elements: (a) a review of the differences between IWV/IWP and OM-6/OM-10, (b) a comprehensive audit of the IST Program scope for valves, (c) creation of the program and supporting basis documents, the Relief Requests, and implementing procedures, (d) interdivisional coordination, (e) submittal to the USNRC, and (f) training. Subsections IWV and IWP have been used and essentially unchanged for over a decade. The new Code (Parts 1, 6, and 10 called OM-1, OM-6, and OM-10) includes several significant changes from the old Code. Our group identified these differences and drafted revised and reorganized Inservice Testing (IST) Program documents. We also considered USNRC Generic Letter 89-04 (GL 89-04), open-quotes Guidance on Developing Acceptable Inservice Testing Programsclose quotes, and NUREG-1482, Guidelines for Inservice Testing at Nuclear Power Plants, while revising the program. There were six pump relief requires and 13 valve relief requests in the program for the first 10-year interval. For the revised program we needed only one pump relief request (and no valve relief requests). Converting to the 1989 edition of the ASME Code did not require changes to the technical specifications. We revised our Updated Final Safety Analysis Report (UFSAR) to reflect the IST Program for the second 10-year interval. UFSAR changes were minor, consisting of updated references to the Code edition and 10 CFR 50.55a(f), open-quotes Inservice Testing Requirementsclose quotes

  10. Double-blinded, placebo-controlled trial on intravenous L-alanyl-L-glutamine in the incidence of oral mucositis following chemoradiotherapy in patients with head-and-neck cancer

    International Nuclear Information System (INIS)

    Cerchietti, Leandro C.A.; Navigante, Alfredo H.; Lutteral, Maribel A.; Castro, Monica A.; Kirchuk, Ricardo; Bonomi, Marcelo; Cabalar, Maria Esther; Roth, Berta; Negretti, Graciela; Sheinker, Beatriz; Uchima, Patricia

    2006-01-01

    Purpose: We performed this double-blinded, placebo-controlled study to determine the safety and efficacy of L-alanyl-L-glutamine in the prevention of mucositis in patients with head-and-neck cancer. Methods and Materials: Thirty-two patients with head-and-neck cancer were treated with chemoradiotherapy (CRT) (radiotherapy daily up to 70 Gy plus cisplatin/5-fluoruracil once a week) and were asked to participate. Twenty-nine patients received the CRT schedule and were double-blindly assigned to receive either intravenous L-alanyl-L-glutamine 0.4 g/kg weight/day or an equal volume of saline (placebo) during chemotherapy days. Results: Fourteen patients received L-alanyl-L-glutamine and 15 received placebo. Mucositis was assessed by the Objective Mucositis Score (OMS) and the World Health Organization (WHO) grading system. There was a significant difference in incidence of mucositis developed in patients receiving placebo compared with those who received L-alanyl-L-glutamine (p = 0.035). The number of patients with severe objective mucositis (OMS >1.49) was higher in the placebo group compared with the L-alanyl-L-glutamine group (67% vs. 14%, p 0.007). L-alanyl-L-glutamine patients experienced less pain (three highest Numeric Rating Scale scores of 1.3/10 vs. 6.3/10 respectively, p = 0.008) and need for feeding tubes (14% vs. 60% respectively, p = 0.020) compared with placebo patients. No adverse effects related to the drug or the infusions were noted in either group. Conclusion: For patients with head-and-neck cancer receiving CRT, intravenous L-alanyl-L-glutamine may be an effective preventive measure to decrease the severity of mucositis

  11. Breast cancer 1 (BrCa1 may be behind decreased lipogenesis in adipose tissue from obese subjects.

    Directory of Open Access Journals (Sweden)

    Francisco J Ortega

    Full Text Available CONTEXT: Expression and activity of the main lipogenic enzymes is paradoxically decreased in obesity, but the mechanisms behind these findings are poorly known. Breast Cancer 1 (BrCa1 interacts with acetyl-CoA carboxylase (ACC reducing the rate of fatty acid biosynthesis. In this study, we aimed to evaluate BrCa1 in human adipose tissue according to obesity and insulin resistance, and in vitro cultured adipocytes. RESEARCH DESIGN AND METHODS: BrCa1 gene expression, total and phosphorylated (P- BrCa1, and ACC were analyzed in adipose tissue samples obtained from a total sample of 133 subjects. BrCa1 expression was also evaluated during in vitro differentiation of human adipocytes and 3T3-L1 cells. RESULTS: BrCa1 gene expression was significantly up-regulated in both omental (OM; 1.36-fold, p = 0.002 and subcutaneous (SC; 1.49-fold, p = 0.001 adipose tissue from obese subjects. In parallel with increased BrCa1 mRNA, P-ACC was also up-regulated in SC (p = 0.007 as well as in OM (p = 0.010 fat from obese subjects. Consistent with its role limiting fatty acid biosynthesis, both BrCa1 mRNA (3.5-fold, p<0.0001 and protein (1.2-fold, p = 0.001 were increased in pre-adipocytes, and decreased during in vitro adipogenesis, while P-ACC decreased during differentiation of human adipocytes (p = 0.005 allowing lipid biosynthesis. Interestingly, BrCa1 gene expression in mature adipocytes was restored by inflammatory stimuli (macrophage conditioned medium, whereas lipogenic genes significantly decreased. CONCLUSIONS: The specular findings of BrCa1 and lipogenic enzymes in adipose tissue and adipocytes reported here suggest that BrCa1 might help to control fatty acid biosynthesis in adipocytes and adipose tissue from obese subjects.

  12. Enhancing E. coli tolerance towards oxidative stress via engineering its global regulator cAMP receptor protein (CRP.

    Directory of Open Access Journals (Sweden)

    Souvik Basak

    Full Text Available Oxidative damage to microbial hosts often occurs under stressful conditions during bioprocessing. Classical strain engineering approaches are usually both time-consuming and labor intensive. Here, we aim to improve E. coli performance under oxidative stress via engineering its global regulator cAMP receptor protein (CRP, which can directly or indirectly regulate redox-sensing regulators SoxR and OxyR, and other ~400 genes in E. coli. Error-prone PCR technique was employed to introduce modifications to CRP, and three mutants (OM1~OM3 were identified with improved tolerance via H(2O(2 enrichment selection. The best mutant OM3 could grow in 12 mM H(2O(2 with the growth rate of 0.6 h(-1, whereas the growth of wild type was completely inhibited at this H(2O(2 concentration. OM3 also elicited enhanced thermotolerance at 48°C as well as resistance against cumene hydroperoxide. The investigation about intracellular reactive oxygen species (ROS, which determines cell viability, indicated that the accumulation of ROS in OM3 was always lower than in WT with or without H(2O(2 treatment. Genome-wide DNA microarray analysis has shown not only CRP-regulated genes have demonstrated great transcriptional level changes (up to 8.9-fold, but also RpoS- and OxyR-regulated genes (up to 7.7-fold. qRT-PCR data and enzyme activity assay suggested that catalase (katE could be a major antioxidant enzyme in OM3 instead of alkyl hydroperoxide reductase or superoxide dismutase. To our knowledge, this is the first work on improving E. coli oxidative stress resistance by reframing its transcription machinery through its native global regulator. The positive outcome of this approach may suggest that engineering CRP can be successfully implemented as an efficient strain engineering alternative for E. coli.

  13. SOILS AS NATURAL REACTORS FOR SWINE WASTEWATER TREATMENT

    Directory of Open Access Journals (Sweden)

    Francisco Bautista

    2011-04-01

    Full Text Available The ability of soils to mineralize organic matter depends on their individual characteristics; when waste waters are added to them their organic matter content (OM, cationic exchange capacity (CEC and percentage of clay (PC are altered. Pedotransfer functions (PTF enable certain processes to be determined from easily measured soil properties. The aims of this study were i to generate PTF to estimate the retention and mineralisation of dissolved organic matter (DOM present in swine wastewater (SWW based on measurements of OM, CEC and PC and ii to identify the soils most suited to acting as natural reactors for treating SWW, using multicriteria analysis. Samples were taken from ten soils (epipedons or superficial samples to measure the retention of dissolved organic matter (RDOM in 30 cm high soil columns, making three applications of SWW. In addition, an experiment was carried out in pots to measure the effect of SWW on soil carbon evolution (SCE and the potential anaerobic nitrogen mineralisation (PANM. Multiple regressions were made using soil OM (%, CEC (cmol+ kg-1 and PC (% as independent variables and Chemical Oxygen Demand (COD, SCE and PANM as dependent variables. The PFT found were RDOM = 41.5 + (2.8*CEC – (0.81*PC – (3.5*OM  r= 0.81; SCE =  542.3 + (20.1*OM + (4.6*CEC – (2.7*PC r= 0.96; PANM = -8.4 + (3.45*OM + (1.12*PC – (2.20*CEC r= 0.88. The most suitable soils for acting as natural reactors of SWW were the Luvisol LVct and an unclassified EPI-1. Â

  14. Maximal Conflict Set Enumeration Algorithm Based on Locality of Petri Nets%基于Pe tri网局部性的极大冲突集枚举算法

    Institute of Scientific and Technical Information of China (English)

    潘理; 郑红; 刘显明; 杨勃

    2016-01-01

    冲突是Petri网研究的重要主题。目前Petri网冲突研究主要集中于冲突建模和冲突消解策略,而对冲突问题本身的计算复杂性却很少关注。提出Petri网的冲突集问题,并证明冲突集问题是NP(Non-deterministic Polyno-mial)完全的。提出极大冲突集动态枚举算法,该算法基于当前标识的所有极大冲突集,利用Petri网实施局部性,仅计算下一标识中受局部性影响的极大冲突集,从而避免重新枚举所有极大冲突集。该算法时间复杂度为O(m2 n),m是当前标识的极大冲突集数目,n是变迁数。最后证明自由选择网、非对称选择网的极大冲突集枚举算法复杂度可降至O(n2)。极大冲突集枚举算法研究将为Petri网冲突问题的算法求解提供理论参考。%Conflict is an essential concept in Petri net theory.The existing research focuses on the modelling and resolu-tion strategies of conflict problems,but less on the computational complexity of the problems theirselves.In this paper,we pro-pose the conflict set problem for Petri nets,and prove that the conflict set problem is NP-complete.Furthermore,we present a dynamic algorithm for the maximal conflict set enumeration.Our algorithm only computes those conflict sets that are affected by local firing,which avoids enumerating all maximal conflict sets at each marking.The algorithm needs time O(m2n)where m is the number of maximal conflict sets at the current marking and n is the number of transitions.Finally,we show that the maximal conflict set enumeration problem can be solved in O(n2)for free-choice nets and asymmetric choice nets.The results on complexity of thel conflict set problem provide a theoretical reference for solving conflict problems of Petri nets.

  15. Production of organic fertilizer from olive mill wastewater by combining solar greenhouse drying and composting.

    Science.gov (United States)

    Galliou, F; Markakis, N; Fountoulakis, M S; Nikolaidis, N; Manios, T

    2018-05-01

    Olive mill wastewater (OMW) is generated during the production of olive oil. Its disposal is still a major environmental problem in Mediterranean countries, despite the fact that a large number of technologies have been proposed up to date. The present work examines for the first time a novel, simple and low-cost technology for OMW treatment combining solar drying and composting. In the first step, OMW was dried in a chamber inside a solar greenhouse using swine manure as a bulking agent. The mean evaporation rate was found to be 5.2 kg H 2 O/m 2 /d for a drying period of 6 months (February-August). High phenol (75%) and low nitrogen (15%) and carbon (15%) losses were recorded at the end of the solar drying process. The final product after solar drying was rich in nutrients (N: 27.8 g/kg, P: 7.3 g/kg, K: 81.6 g/kg) but still contained significant quantities of phenols (18.4 g/kg). In order to detoxify the final product, a composting process was applied as a second step with or without the use of grape marc as bulking agent. Results showed that the use of grape marc as a bulking agent at a volume ratio of 1:1 achieved a higher compost temperature profile (60 °C) than 2:1 (solar drying product: grape marc) or no use (solar drying product). The end product after the combination of solar drying and composting had the characteristics of an organic fertilizer (57% organic carbon) rich in nutrients (3.5% N, 1% P, 6.5% K) with quite low phenol content (2.9 g/kg). Finally, the use of this product for the cultivation of pepper plants approved its fertility which was found similar with commercial NPK fertilizers. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Geochemical analysis of Lower Toarcian black shale from Mecsek Mountain, Hungary

    Science.gov (United States)

    Podobni, András; Rübsam, Wolfgang; Schwark, Lorenz; Kovács, János; Fekete, József

    2016-04-01

    section investigated. Variable, but mainly high HI values (100-700 mgHC/gTOC) allow attributing the OM to a type II kerogen. Results are in agreement with previous studies showing that the OM is mainly composed of liptinites, which point to algal and land plant-derived OM [2]. Moreover, variable contributions from marine and terrigenous sources are also attested by the ratio of isoprenoids (pristane and phytane) and the corresponding n-alkanes. Accumulation of OM occurred under mildly reducing, most likely anoxic, conditions as indicated by Pr/Phy ratios of about 1.5 and mainly low HHI values Guide: Volume 2, Biomarkers and Isotopes in Petroleum Systems and Earth History. Cambridge University Press, 1132 pp.

  17. Comparison of greenhouse gas emissions from rice paddy fields under different nitrogen fertilization loads in Chongming Island, Eastern China

    International Nuclear Information System (INIS)

    Zhang, Xianxian; Yin, Shan; Li, Yinsheng; Zhuang, Honglei; Li, Changsheng

    2014-01-01

    Rice is one of the major crops of southern China and Southeast Asia. Rice paddies are one of the largest agricultural greenhouse gas (GHG) sources in this region because of the application of large quantities of nitrogen (N) fertilizers to the plants. In particular, the production of methane (CH 4 ) is a concern. Investigating a reasonable amount of fertilizers to apply to plants is essential to maintaining high yields while reducing GHG emissions. In this study, three levels of fertilizer application [high (300 kg N/ha), moderate (210 kg N/ha), and low (150 kg N/ha)] were designed to examine the effects of variation in N fertilizer application rate on carbon dioxide (CO 2 ), methane (CH 4 ), and nitrous oxide (N 2 O) emissions from the paddy fields in Chongming Island, Shanghai, China. The high level (300 kg N/ha) represented the typical practice adopted by the local farmers in the area. Maximum amounts of CH 4 and N 2 O fluxes were observed upon high-level fertilizer application in the plots. Cumulative N 2 O emissions of 23.09, 40.10, and 71.08 mg N 2 O/m 2 were observed over the growing season in 2011 under the low-, moderate-, and high-level applications plots, respectively. The field data also indicated that soil temperatures at 5 and 10 cm soil depths significantly affected soil respiration; the relationship between Rs and soil temperature in this study could be described by an exponential model. Our study showed that reducing the high rate of fertilizer application is a feasible way of attenuating the global-warming potential while maintaining the optimum yield for the studied paddy fields. - Highlights: • In Chongming Island, Shanghai, GHG emissions were measured under different nitrogen fertilizer rates from the paddy. • Low nitrogen fertilizer application reduced CH 4 and N 2 O emissions. • The study showed that 210 kg N/ha was the suitable fertilizer application rate

  18. Overlap valence on 2+1 flavor domain wall fermion configurations with deflation and low-mode substitution

    International Nuclear Information System (INIS)

    Li, A.; Alexandru, A.; Lee, F. X.; Chen, Y.; Doi, T.; Dong, S. J.; Draper, T.; Gong, M.; Horvath, I.; Liu, K. F.; Hasenfratz, A.; Mathur, N.; Streuer, T.; Zhang, J. B.

    2010-01-01

    The overlap fermion propagator is calculated on 2+1 flavor domain-wall fermion gauge configurations on 16 3 x32, 24 3 x64 and 32 3 x64 lattices. With hyper-cubic (HYP) smearing and low eigenmode deflation, it is shown that the inversion of the overlap operator can be expedited by ∼20 times for the 16 3 x32 lattice and ∼80 times for the 32 3 x64 lattice. The overhead cost for calculating eigenmodes ranges from 4.5 to 7.9 propagators for the above lattices. Through the study of hyperfine splitting, we found that the O(m 2 a 2 ) error is small and these dynamical fermion lattices can adequately accommodate quark mass up to the charm quark. A preliminary calculation of the low-energy constant Δ mix which characterizes the discretization error of the pion made up of a pair of sea and valence quarks in this mixed-action approach is carried out via the scalar correlator with periodic and antiperiodic boundary conditions. It is found to be small which shifts a 300 MeV pion mass by ∼10 to 19 MeV on these sets of lattices. We have studied the signal-to-noise issue of the noise source for the meson and baryon. We introduce a new algorithm with Z 3 grid source and low eigenmode substitution to study the many-to-all meson and baryon correlators. It is found to be efficient in reducing errors for the correlators of both mesons and baryons. With 64-point Z 3 grid source and low-mode substitution, it can reduce the statistical errors of the light quark (m π ∼200-300 MeV) meson and nucleon correlators by a factor of ∼3-4 as compared to the point source. The Z 3 grid source itself can reduce the errors of the charmonium correlators by a factor of ∼3.

  19. Processing and optimization of functional ceramic coatings and inorganic nanomaterials

    Science.gov (United States)

    Nyutu, Edward Kennedy G.

    effects on the synthesis of nanocrystalline tetragonal barium titanate. The effects of microwave frequency (fixed and variable), microwave bandwidths sweep time, and aging time on the microstructure, particle sizes, phase purity, surface areas, and porosities of the as-prepared BaTiO3 were systematically investigated. The final part of the research involves a new rapid and facile synthetic route to prepare size-tunable, ultranarrow, high surface area OMS-2 nanomaterials via open-vessel microwave-assisted refluxing preparations without employing templates or surfactants. The particle size control is achieved by varying the concentration or type of non-aqueous co-solvent. The structural, textural, and catalytic application properties of the prepared nanomaterials are investigated.

  20. Variations in the OM/OC ratio of urban organic aerosol next to a major roadway.

    Science.gov (United States)

    Brown, Steven G; Lee, Taehyoung; Roberts, Paul T; Collett, Jeffrey L

    2013-12-01

    Understanding the organic matter/organic carbon (OM/OC) ratio in ambient particulate matter (PM) is critical to achieve mass closure in routine PM measurements, to assess the sources of and the degree of chemical processing organic aerosol particles have undergone, and to relate ambient pollutant concentrations to health effects. Of particular interest is how the OM/OC ratio varies in the urban environment, where strong spatial and temporal gradients in source emissions are common. We provide results of near-roadway high-time-resolution PM1 OM concentration and OM/OC ratio observations during January 2008 at Fyfe Elementary School in Las Vegas, NV, 18 m from the U.S. 95 freeway soundwall, measured with an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS). The average OM/OC ratio was 1.54 (+/- 0.20 standard deviation), typical of environments with a low amount of secondary aerosol formation. The 2-min average OM/OC ratios varied between 1.17 and 2.67, and daily average OM/OC ratios varied between 1.44 and 1.73. The ratios were highest during periods of low OM concentrations and generally low during periods of high OM concentrations. OM/OC ratios were low (1.52 +/- 0.14, on average) during the morning rush hour (average OM = 2.4 microg/m3), when vehicular emissions dominate this near-road measurement site. The ratios were slightly lower (1.46 +/- 0.10) in the evening (average OM = 6.3 microg/m3), when a combination of vehicular and fresh residential biomass burning emissions was typically present during times with temperature inversions. The hourly averaged OM/OC ratio peaked at 1.66 at midday. OM concentrations were similar regardless of whether the monitoring site was downwind or upwind of the adjacent freeway throughout the day, though they were higher during stagnant conditions (wind speed < 0.5 m/sec). The OM/OC ratio generally varied more with time of day than with wind direction and speed.

  1. Hijacking of the O-GlcNAcZYME complex by the HTLV-1 Tax oncoprotein facilitates viral transcription.

    Science.gov (United States)

    Groussaud, Damien; Khair, Mostafa; Tollenaere, Armelle I; Waast, Laetitia; Kuo, Mei-Shiue; Mangeney, Marianne; Martella, Christophe; Fardini, Yann; Coste, Solène; Souidi, Mouloud; Benit, Laurence; Pique, Claudine; Issad, Tarik

    2017-07-01

    The viral Tax oncoprotein plays a key role in both Human T-cell lymphotropic virus type 1 (HTLV-1)-replication and HTLV-1-associated pathologies, notably adult T-cell leukemia. Tax governs the transcription from the viral 5'LTR, enhancing thereby its own expression, via the recruitment of dimers of phosphorylated CREB to cAMP-response elements located within the U3 region (vCRE). In addition to phosphorylation, CREB is also the target of O-GlcNAcylation, another reversible post-translational modification involved in a wide range of diseases, including cancers. O-GlcNAcylation consists in the addition of O-linked-N-acetylglucosamine (O-GlcNAc) on Serine or Threonine residues, a process controlled by two enzymes: O-GlcNAc transferase (OGT), which transfers O-GlcNAc on proteins, and O-GlcNAcase (OGA), which removes it. In this study, we investigated the status of O-GlcNAcylation enzymes in HTLV-1-transformed T cells. We found that OGA mRNA and protein expression levels are increased in HTLV-1-transformed T cells as compared to control T cell lines while OGT expression is unchanged. However, higher OGA production coincides with a reduction in OGA specific activity, showing that HTLV-1-transformed T cells produce high level of a less active form of OGA. Introducing Tax into HEK-293T cells or Tax-negative HTLV-1-transformed TL-om1 T cells is sufficient to inhibit OGA activity and increase total O-GlcNAcylation, without any change in OGT activity. Furthermore, Tax interacts with the OGT/OGA complex and inhibits the activity of OGT-bound OGA. Pharmacological inhibition of OGA increases CREB O-GlcNAcylation as well as HTLV-1-LTR transactivation by Tax and CREB recruitment to the LTR. Moreover, overexpression of wild-type CREB but not a CREB protein mutated on a previously described O-GlcNAcylation site enhances Tax-mediated LTR transactivation. Finally, both OGT and OGA are recruited to the LTR. These findings reveal the interplay between Tax and the O-GlcNAcylation pathway

  2. A maximum pseudo-likelihood approach for estimating species trees under the coalescent model

    Directory of Open Access Journals (Sweden)

    Edwards Scott V

    2010-10-01

    Full Text Available Abstract Background Several phylogenetic approaches have been developed to estimate species trees from collections of gene trees. However, maximum likelihood approaches for estimating species trees under the coalescent model are limited. Although the likelihood of a species tree under the multispecies coalescent model has already been derived by Rannala and Yang, it can be shown that the maximum likelihood estimate (MLE of the species tree (topology, branch lengths, and population sizes from gene trees under this formula does not exist. In this paper, we develop a pseudo-likelihood function of the species tree to obtain maximum pseudo-likelihood estimates (MPE of species trees, with branch lengths of the species tree in coalescent units. Results We show that the MPE of the species tree is statistically consistent as the number M of genes goes to infinity. In addition, the probability that the MPE of the species tree matches the true species tree converges to 1 at rate O(M -1. The simulation results confirm that the maximum pseudo-likelihood approach is statistically consistent even when the species tree is in the anomaly zone. We applied our method, Maximum Pseudo-likelihood for Estimating Species Trees (MP-EST to a mammal dataset. The four major clades found in the MP-EST tree are consistent with those in the Bayesian concatenation tree. The bootstrap supports for the species tree estimated by the MP-EST method are more reasonable than the posterior probability supports given by the Bayesian concatenation method in reflecting the level of uncertainty in gene trees and controversies over the relationship of four major groups of placental mammals. Conclusions MP-EST can consistently estimate the topology and branch lengths (in coalescent units of the species tree. Although the pseudo-likelihood is derived from coalescent theory, and assumes no gene flow or horizontal gene transfer (HGT, the MP-EST method is robust to a small amount of HGT in the dataset. In addition, increasing the number of genes does not increase the computational time substantially. The MP-EST method is fast for analyzing datasets that involve a large number of genes but a moderate number of species.

  3. Organic sedimentation in modern lacustrine systems: A case study from Lake Malawi, East Africa

    Science.gov (United States)

    Ellis, Geoffrey S.; Barry J. Katz,; Christopher A. Scholz,; Peter K. Swart,

    2015-01-01

    This study examines the relationship between depositional environment and sedimentary organic geochemistry in Lake Malawi, East Africa, and evaluates the relative significance of the various processes that control sedimentary organic matter (OM) in lacustrine systems. Total organic carbon (TOC) concentrations in recent sediments from Lake Malawi range from 0.01 to 8.80 wt% and average 2.83 wt% for surface sediments and 2.35 wt% for shallow core sediments. Hydrogen index (HI) values as determined by Rock-Eval pyrolysis range from 0 to 756 mg HC g−1 TOC and average 205 mg HC g−1 TOC for surface sediments and 228 mg HC g−1 TOC for shallow core samples. On average, variations in primary productivity throughout the lake may account for ~33% of the TOC content in Lake Malawi sediments (as much as 1 wt% TOC), and have little or no impact on sedimentary HI values. Similarly, ~33% to 66% of the variation in TOC content in Lake Malawi sediments appears to be controlled by anoxic preservation of OM (~1–2 wt% TOC), although some component of the water depth–TOC relationship may be due to physical sediment transport processes. Furthermore, anoxic preservation has a minimal effect on HI values in Lake Malawi sediments. Dilution of OM by inorganic sediment may account for ~16% of variability in TOC content in Lake Malawi sediments (~0.5 wt% TOC). The effect of inputs of terrestrial sediment on the organic character of surface sediments in these lakes is highly variable, and appears to be more closely related to the local depositional environment than the regional flux of terrestrial OM. Total nitrogen and TOC content in surface sediments collected throughout the lake are found to be highly correlated (r2 = 0.95), indicating a well-homogenized source of OM to the lake bottom. The recurring suspension and deposition of terrestrial sediment may account for significant amounts of OM deposited in offshore regions of the lake. This process effectively separates denser

  4. The molecular characteristics of pyrogenic organic materials and their aqueous leachates

    Science.gov (United States)

    Wozniak, A. S.; Hatcher, P.; Mitra, S.; Bostick, K. W.; Zimmerman, A. R.

    2016-12-01

    Pyrogenic organic matter (Py-OM), or black carbon, is known to impact soil chemistry, pollutant transport, regional and global carbon cycling, and climate. Py-OM is incorporated into soils via atmospheric deposition (e.g., from biomass, fossil fuel combustion) or direct applications by humans (e.g., biochars applied for agricultural production). Due to its presumed refractory and immobile nature, soil Py-OM is thought to be efficiently buried, sequestering atmospheric CO2. However, tracers of dissolved Py-OM (Py-DOM) have been detected in appreciable quantities in riverine, estuarine, and oceanic waters suggesting that Py-OM is more mobile in the environment than expected. The molecular characteristics of Py-OM are likely to be a controlling factor in the quantities and impacts of Py-DOM released to aqueous systems. Yet, little is known about the detailed molecular composition of these materials, let alone how those molecular characteristics vary with combustion conditions or are altered by environmental processes. Here, we examine oak and grass Py-OM (combusted over a range of temperatures), natural Py-OM (chars aged in the environment for variable lengths of time), and their Py-DOM leachates via nuclear magnetic resonance spectroscopy (NMR) and Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Multi-CP 13C NMR analyses of Py-OM materials and 1H NMR analyses of corresponding Py-DOM leachates reveal that Py-OM combustion temperature, environmental exposure, and molecular characteristics are reflected in Py-DOM quantities and characteristics. The relative amounts of aromatic C in Py-OM 1) decreases with environmental exposure, the relative oxygen-content in both Py-OM and Py-DOM, and the amount of Py-DOC released per g of Py-OC but 2) is positively correlated with combustion temperature and the relative contributions of acetate and aliphatic hydrogens (CH2) in Py-DOM. Preliminary FTICR-MS analyses show Py-DOM produced from oak at 400 °C to

  5. Interannual variations in length-of-day (LOD) as a tool to assess climate variability and climate change

    Science.gov (United States)

    Lehmann, E.

    2016-12-01

    On interannual time scales the atmosphere affects significantly fluctuations in the geodetic quantity of length-of-day (LOD). This effect is directly proportional to perturbations in the relative angular momentum of the atmosphere (AAM) computed from zonal winds. During El Niño events tropospheric westerlies increase due to elevated sea surface temperatures (SST) in the Pacific inducing peak anomalies in relative AAM and correspondingly, in LOD. However, El Niño events affect LOD variations differently strong and the causes of this varying effect are yet not clear. Here, we investigate the LOD-El Niño relationship in the 20th and 21st century (1982-2100) whether the quantity of LOD can be used as a geophysical tool to assess variability and change in a future climate. In our analysis we applied a windowed discrete Fourier transform on all de-seasonalized data to remove climatic signals outside of the El Niño frequency band. LOD (data: IERS) was related in space and time to relative AAM and SSTs (data: ERA-40 reanalysis, IPCC ECHAM05-OM1 20C, A1B). Results from mapped Pearson correlation coefficients and time frequency behavior analysis identified a teleconnection pattern that we term the EN≥65%-index. The EN≥65%-index prescribes a significant change in variation in length-of-day of +65% and more related to (1) SST anomalies of >2° in the Pacific Niño region (160°E-80°W, 5°S-5°N), (2) corresponding stratospheric warming anomalies of the quasi-biennial oscillation (QBO), and (3) strong westerly winds in the lower equatorial stratosphere. In our analysis we show that the coupled atmosphere-ocean conditions prescribed in the EN≥65%-index apply to the extreme El Niño events of 19982/83 and 1997/98, and to 75% of all El Niño events in the last third of the 21st century. At that period of time the EN≥65%-index describes a projected altered base state of the equatorial Pacific that shows almost continuous El Niño conditions under climate warming.

  6. Statistical Downscaling of Rainfall for Romania From six European GCMs for Present Day and Future Climate

    Science.gov (United States)

    Huebener, H.; Cubasch, U.

    2007-12-01

    Circulation Weather Types calculated from ERA40 SLP fields are correlated to rainfall for selected Romanian stations in the lower Danube catchment. The western, central, and eastern parts of the area show differing correlations between rainfall and CWTs in the observations. For all all regions and most CWTs, precipitation amount per rain day is larger in summer while occurrence frequency of rain days per CWT is larger in winter. Rain amount and frequency show high positive (negative) correlation with cyclonic (anti-cyclonic) days. In the western region rain amounts are highest for SE CWT, associated with synoptic disturbances originating from the central Mediterranean. In the central and eastern region N to E CWTs provide the highest rain amounts, associated with low pressure over the black sea and the eastern Mediterranean. SW to NW CWTs are negatively correlated with rain in the eastern part of the area due to diffluence south of the Carpathians. In the scope of the EU-Project ENSEMBLES, CWTs are also calculated using six European GCMs (BCC, NERSC, Norway; CNRM-CM3, CNRM, France; EGMAM, FU-Berlin, Germany; ECHAM5/MPI-OM1, MPI-M, Germany; HadGEM1, Hadley-Centre, UK; IPSL-CM4, Institute Pierre Simone Laplace, France). Comparison of the occurrence frequency of CWTs for present-day simulations to the ERA40 results shows a positive bias of W CWT in Romania, associated with a too strong northern polar low in all models. Additionally an overestimation of cyclonic and an underestimation of anti-cyclonic days is found in the models. This feature is consistent with a general tendency of GCMs to underestimate blocking situations. The annual cycle of CWTs for Romania is displayed in the different models in varying quality: while ECHAM5/MPI-OM shows an annual cycle close to observations, some of the other models are not suited to represent the annual cycle correctly. All models show an increase of anti-cyclonic days combined with a decrease of cyclonic days for the SRES A1B

  7. Direct spectrometry: a new alternative for measuring the fluorescence of composite resins and dental tissues.

    Science.gov (United States)

    da Silva, Tm; de Oliveira, Hpm; Severino, D; Balducci, I; Huhtala, Mfrl; Gonçalves, Sep

    2014-01-01

    The aim of this study was to evaluate the fluorescence intensity of different composite resins and compare those values with the fluorescence intensity of dental tissues. Different composite resins were used to make 10 discs (2 mm in depth and 4 mm in diameter) of each brand, divided into groups: 1) Z (Filtek Z350, 3M ESPE), 2) ES (Esthet-X, Dentsply), 3) A (Amelogen Plus, Ultradent), 4) DVS (Durafill-VS, Heraeus Kulzer) with 2 mm composite resin for enamel (A2), 5) OES ([Esthet-X] opaque-OA [1 mm] + enamel-A2 [1 mm]); 6) ODVSI ([Charisma-Opal/Durafill-VSI], opaque-OM (1 mm) + translucent [1mm]), and 7) DVSI ([Durafill- VSI] translucent [2 mm]). Dental tissue specimens were obtained from human anterior teeth cut in a mesiodistal direction to obtain enamel, dentin, and enamel/dentin samples (2 mm). The fluorescence intensity of specimens was directly measured using an optic fiber associated with a spectrometer (Ocean Optics USB 4000) and recorded in graphic form (Origin 8.0 program). Data were submitted to statistical analysis using Dunnet, Tukey, and Kruskall-Wallis tests. Light absorption of the composite resins was obtained in a spectral range from 250 to 450 nm, and that of dental tissues was between 250 and 300 nm. All composite resins were excited at 398 nm and exhibited maximum emissions of around 485 nm. Fluorescence intensity values for all of the resins showed statistically significant differences (measured in arbitrary units [AUs]), with the exception of groups Z and DVS. Group DVSI had the highest fluorescence intensity values (13539 AU), followed by ODVS (10440 AU), DVS (10146 AU), ES (3946 AU), OES (3841 AU), A (3540 AU), and Z (1146 AU). The fluorescence intensity values for the composite resins differed statistically from those of dental tissues (E=1380 AU; D=6262 AU; E/D=3251 AU). The opacity interfered with fluorescence intensity, and group Z demonstrated fluorescence intensity values closest to that of tooth enamel. It is concluded that the

  8. Biodiversity Data Interoperability Issues: on the Opportunity of Exploiting O&M for Biotic Data Management

    Science.gov (United States)

    Oggioni, A.; Tagliolato, P.; Schleidt, K.; Carrara, P.; Grellet, S.; Sarretta, A.

    2016-02-01

    The state of the art in biodiversity data management unfortunately encompases a plethora of diverse data formats. Compared to other research fields, there is a lack in harmonization and standardization of these data. While data from traditional biodiversity collections (e.g. from museums) can be easily represented by existing standard as provided by TDWG, the growing number of field observations stemming from both VGI activities (e.g. iNaturalist) as well as from automated systems (e.g. animal biotelemetry) would at the very least require upgrades of current formats. Moreover, from an eco-informatics perspective, the integration and use of data from different scientific fields is the norm (abiotic data, geographic information, etc.); the possibility to represent this information and biodiversity data in a homogeneous way would be an advantage for interoperability, allowing for easy integration across environmental media. We will discuss the possibility to exploit the Open Geospatial Consortium/ISO standard, Observations and Measurements (O&M) [1], a generic conceptual model developed for observation data but with strong analogies with the biodiversity-oriented OBOE ontology [2]. The applicability of OGC O&M for the provision of biodiviersity occurence data has been suggested by the INSPIRE Cross Thematic Working Group on Observations & Measurements [3], Inspire Environmental Monitoring Facilities Thematic Working Group [4] and New Zealand Environmental Information Interoperability Framework [5]. This approach, in our opinion, could be an advantage for the biodiversity community. We will provide some examples for encoding biodiversity occurence data using the O&M standard in addition to highlighting the advatages offered by O&M in comparison to other representation formats. [1] Cox, S. (2013). Geographic information - Observations and measurements - OGC and ISO 19156. [2] Madin, J., Bowers, S., Schildhauer, M., Krivov, S., Pennington, D., & Villa, F. (2007). An ontology for describing and synthesizing ecological observation data. Ecological Informatics, 2(3), 279-296. [3] INSPIRE_D2.9_O&M_Guidelines_v2.0rc3.pdf[4] INSPIRE_DataSpecification_EF_v3.0.pdf[5] Watkins, A. (2012) Biodiversity Interoperability through Open Geospatial Standards

  9. Synthesis, Characterization, and Catalytic Applications of Transition Metal Oxide/Carbonate Nanomaterials

    Science.gov (United States)

    Jin, Lei

    2011-12-01

    topic in this thesis presents studies of ethane oxydehydrogenation (ODH) in the presence of CO2 over the octahedral molecular sieve (OMS-2) catalyst. Conversion of CO2 into organic compounds has been studied intensively. Ethane catalytic oxydehydrogenation in the presence of CO2 offers an attractive route for converting CO2. In this study, using OMS-2 as the catalyst in C2H6 dehydrogenation in the presence of CO2 is an example where extreme conditions are used to drive high conversions of ethane (> 70%) and CO2 (up to 56%) with high selectivity towards ethylene (87%) with a short contact time (0.6 s). This inexpensive material also showed high stability during the process, and the presence of CO2 removed coke depositions throughout the catalyst. The results obtained from this study open up new possibilities for olefin dehydrogenations in the presence of CO2, a perfect feedstock for any process involving ethylene carbonylation with the recycling of the greenhouse gas. The fourth part of this thesis presents a ZnO/La2O2CO 3 composite prepared by a new and easy method and discusses the use of these materials as heterogeneous catalysts for ultra-fast microwave biodiesel production at low temperatures. The search for solid state materials with high catalytic activities is one of the key steps toward reducing the cost of producing biodiesel. We present a high biodiesel yield (> 95%) in less than 5 minutes under mild reaction conditions (industrial application of the synthesized ZnO/La2O2CO3 as a potential heterogeneous catalyst for fast biodiesel production, avoiding many of the issues found in both commercial and independently published catalysts. Following the fourth part of this thesis, the fifth part presents the synthesis and characterization of a series of rare earth Ln2O 2CO3 (Ln = La, Eu, Nd, and Sm) layered materials as novel basic materials for the biodiesel production. Reports on rare earth oxycarbonate Ln2O2CO3 (Ln = rare earths) layered materials as heterogeneous

  10. Status of industrial pollution and their effect on seed germination and growth performance of albizia lebbek (benth.) and leucaena leucocephala (LAM) de wit

    International Nuclear Information System (INIS)

    Shiuli, M.D.; Alam, S.; Mohiuddin, M.M.

    2005-01-01

    Pollution status of the effluents from three different industries viz. tanneries, fisheries and textiles, grown in the vicinity of the Karnafully River, Chittagong, Bangladesh and their influence on soil, seed germination and plant growth have been studied. The effluents pollute the adjacent water bodies and soils. The effluents from the tanneries are much more polluted than that of effluents from textiles and fisheries. This is due to the accumulation more total solids (1779 mg/l) as compared to that of 539 mg/l and 466 mg/l in textiles and fisheries effluents respectively and thus Chloride (3962 mg/i), Sulfate (450 mg/l) and Nitrate (7.03 mg/l), eventually showed similar trend. In addition to that, some of the pollution related parameters were dominant in the effluents of both textiles ( Turbidity- 177.9 NTU, SS- 23.27 ml/l, D.O.- 3.0 mg/l, COD- 8480 mg/l, BOD- 1860 mg/l Phosphate- 9.38 mg/l) and fisheries (D.O. -2.5 mg/l) than that of the tanneries (Turbidity- 57.6 NTU, SS- 18. 9 ml/l, D.O.- 1.2 mg/l, COD- 7529 mg/i, BOD- 1653 mg/l , Phosphate- 7.28 mg/l). Irrespective of physical or chemical composition most of the effluents were simply unusable. From the analysis of soil it was detected that the pH of soil samples contaminated with effluents was almost similar (6.7, 6.6 and 6.3, respectively) to that of control (6.2), but the concentration of organic matter, N, P, K and S in soil samples contaminated with the industrial effluents of tanneries (OM-4.5%, N- 0.227%, P- 108.21 micro gram/gram and K - 0.22 m eq/100 g), Fisheries (OM-4.0%, N- 0.4%, P-74.71 micro gram/gram, and K- 0.23 meq/100 g) and Textile (OM- 3.4%, N- 0.167%, P- 120 micro g/gram and K- 0.5 meq/100 g) were significantly higher than that of control samples (OM- 2.0%, N-0.24%, P- 50 micro g/g and k-0.15 meq/100g). Adverse effect of contamination, height growth, collar diameter, total biomass and nodule production of Albizia lebbek were 67% , 18.62 cm, 4 cm, 10.2 gm and 59 in soil without any

  11. Marine Profiles for OGC Sensor Web Enablement Standards

    Science.gov (United States)

    Jirka, Simon

    2016-04-01

    The use of OGC Sensor Web Enablement (SWE) standards in oceanology is increasing. Several projects are developing SWE-based infrastructures to ease the sharing of marine sensor data. This work ranges from developments on sensor level to efforts addressing interoperability of data flows between observatories and organisations. The broad range of activities using SWE standards leads to a risk of diverging approaches how the SWE specifications are applied. Because the SWE standards are designed in a domain independent manner, they intentionally offer a high degree of flexibility enabling implementation across different domains and usage scenarios. At the same time this flexibility allows one to achieve similar goals in different ways. To avoid interoperability issues, an agreement is needed on how to apply SWE concepts and how to use vocabularies in a common way that will be shared by different projects, implementations, and users. To address this need, partners from several projects and initiatives (AODN, BRIDGES, envri+, EUROFLEETS/EUROFLEETS2, FixO3, FRAM, IOOS, Jerico/Jerico-Next, NeXOS, ODIP/ODIP II, RITMARE, SeaDataNet, SenseOcean, X-DOMES) have teamed up to develop marine profiles of OGC SWE standards that can serve as a common basis for developments in multiple projects and organisations. The following aspects will be especially considered: 1.) Provision of metadata: For discovering sensors/instruments as well as observation data, to facilitate the interpretation of observations, and to integrate instruments in sensor platforms, the provision of metadata is crucial. Thus, a marine profile of the OGC Sensor Model Language 2.0 (SensorML 2.0) will be developed allowing to provide metadata for different levels (e.g. observatory, instrument, and detector) and sensor types. The latter will enable metadata of a specific type to be automatically inherited by all devices/sensors of the same type. The application of further standards such as OGC PUCK will benefit from this encoding, too, by facilitating the communication with instruments. 2.) Encoding and modelling of observation data: For delivering observation data, the ISO/OGC Observations and Measurements 2.0 (O&M 2.0) standard serves as a good basis. Within an O&M profile, recommendations will be given on needed observation types that cover different aspects of marine sensing (trajectory, stationary, or profile measurements, etc.). Besides XML, further O&M encodings (e.g. JSON-based) will be considered. 3.) Data access: A profile of the OGC Sensor Observation Service 2.0 (SOS 2.0) standard will be specified to offer a common way on how this web service interface can be used for requesting marine observations and metadata. At the same time this will offer a common interface to cross-domain applications based upon tools such as the GEOSS DAB. Lightweight approaches such as REST will be considered as further bindings for the SOS interface. 4.) Backward compatibility: The profile will consider the existing observation systems so that migration paths towards the specified profiles can be offered. We will present the current state of the profile development. In particular, a comparative analysis of SWE usage in different projects, an outline of the requirements, and fundamental aspects of profiles of SWE standards will be shown.

  12. Assessing the effect of the relative atmospheric angular momentum (AAM) on length-of-day (LOD) variations under climate warming

    Science.gov (United States)

    Lehmann, E.; Hansen, F.; Ulbrich, U.; Nevir, P.; Leckebusch, G. C.

    2009-04-01

    While most studies on model-projected future climate warming discuss climatological quantities, this study investigates the response of the relative atmospheric angular momentum (AAM) to climate warming for the 21th century and discusses its possible effects on future length-of-day variations. Following the derivation of the dynamic relation between atmosphere and solid earth by Barnes et al. (Proc. Roy. Soc., 1985) this study relates the axial atmospheric excitation function X3 to changes in length-of-day that are proportional to variations in zonal winds. On interannual time scales changes in the relative AAM (ERA40 reanalyses) are well correlated with observed length-of-day (LOD, IERS EOP CO4) variability (r=0.75). The El Niño-Southern Oscillation (ENSO) is a prominent coupled ocean-atmosphere phenomenon to cause global climate variability on interannual time scales. Correspondingly, changes in observed LOD relate to ENSO due to observed strong wind anomalies. This study investigates the varying effect of AAM anomalies on observed LOD by relating AAM to variations to ENSO teleconnections (sea surface temperatures, SSTs) and the Pacific North America (PNA) oscillation for the 20th and 21st century. The differently strong effect of strong El Niño events (explained variance 71%-98%) on present time (1962-2000) observed LOD-AAM relation can be associated to variations in location and strength of jet streams in the upper troposphere. Correspondingly, the relation between AAM and SSTs in the NIÑO 3.4 region also varies between explained variances of 15% to 73%. Recent coupled ocean-atmosphere projections on future climate warming suggest changes in frequency and amplitude of ENSO events. Since changes in the relative AAM indicate shifts in large-scale atmospheric circulation patterns due to climate change, AAM - ENSO relations are assessed in coupled atmosphere-ocean (ECHAM5-OM1) climate warming projections (A1B) for the 21st century. A strong rise (+31%) in

  13. The Development of Two Science Investigator-led Processing Systems (SIPS) for NASA's Earth Observation System (EOS)

    Science.gov (United States)

    Tilmes, Curt

    2004-01-01

    software to adapt the system for OMI. We replaced the fundamental database system, Sybase, with an Open Source RDBMS called PostgreSQL, and based the entire OMIDAPS on a cluster of Linux based commodity computers rather than the large SGI servers that MODAPS uses. Rather than relying on a central I/O server host, the new system distributes its data archive among multiple server hosts in the cluster. OMI is also customizing the graphical user interfaces and reporting structure to more closely meet the needs of the OMI Science Team. Prior to 2003, simulated OMI data and the science algorithms were not ready for production testing. We initially constructed a prototype system and tested using a 25 year dataset of Total Ozone Mapping Spectrometer (TOMS) and Solar Backscatter Ultraviolet Instrument (SBUV) data. This prototype system provided a platform to support the adaptation of the algorithms for OMI, and provided reprocessing of the historical data aiding in its analysis. In a recent reanalysis of the TOMS data, the OMIDAPS processed 108,000 full orbits of data through 4 processing steps per orbit, producing about 800,000 files (400 GiB) of level 2 and greater data files. More recently we have installed two instances of the OMIDAPS for integration and testing of OM1 science processes as they get delivered from the Science Team. A Test instance of the OMIDAPS has also supported a series of "Interface Confidence Tests" (ICTs) and End-to-End Ground System tests to ensure the launch readiness of the system. This paper will discuss the high-level hardware, software, and database organization of the OMIDAPS and how it builds on the MODAPS heritage system. It will also provide an overview of the testing and implementation of the production OMIDAPS.

  14. Peru's national folic acid fortification program and its effect on neural tube defects in Lima Programa nacional del Perú de fortificación con ácido fólico y su efecto sobre los defectos del tubo neural en Lima

    Directory of Open Access Journals (Sweden)

    Daniel J. Ricks

    2012-12-01

    contenido de ácido fólico. Se obtuvieron datos del mayor hospital obstétrico de Lima referentes a la prevalencia de nacimientos de niños vivos o mortinatos con defectos del tubo neural durante el período anterior a la fortificación (2004-2005 y el posterior a la misma (2007-2008. RESULTADOS: El contenido de ácido fólico en las muestras de pan obtenidas satisfizo los requisitos legislativos nacionales, si bien fue inferior a la mitad de la concentración que la Organización Mundial de la Salud (OMS recomienda para el Perú (2,6 mg/kg de harina de trigo. La prevalencia de nacimientos de niños con defectos del tubo neural fue de 18,4/10 000 en el período anterior a la fortificación y de 20,0/10 000 en los años posteriores a la fortificación. El riesgo relativo de los defectos del tubo neural después de la fortificación fue de 1,02 (intervalo de confianza de 95%: 0,77-1,35; P = 0,90. CONCLUSIONES: Los valores que la legislación peruana exige en lo que respecta a la fortificación con ácido fólico son inferiores a los que se recomiendan internacionalmente (OMS. La prevalencia de nacimientos de niños con defectos del tubo neural en Lima es superior a las cifras de referencia internacionales. Por otra parte, no se observó ninguna disminución de los defectos del tubo neural después de fortificar la harina con ácido fólico (según los valores normalizados nacionales peruanos. Dado que el aumento de la concentración de ácido fólico en la harina sigue siendo la manera más sostenible de prevenir los defectos del tubo neural, se recomienda que el Perú haga más estrictos los requisitos relativos a la fortificación con ácido fólico para ajustarse a los valores recomendados por la OMS (2,6 mg/kg.

  15. Adubação do milho: IX - Ensaio com lôdo de fossas sépticas "OMS" Fertilizer experiments with corn: IX - Trial with dried sewage sludge

    Directory of Open Access Journals (Sweden)

    G. P. Viégas

    1956-01-01

    Full Text Available No presente artigo os autores apresentam os resultados de um ensaio conduzido em terra roxa misturada, na Estação Experimental Central, Campinas, para estudar o efeito, na cultura do milho, do adubo OMS completado ou não com fósforo e potássio. O adubo OMS é um pó resultante da decantação, em tanques sépticos, do material de esgotos das cidades, contendo aproximadamente 10% de umidade, 45% de matéria orgânica, 2,5% de N, 0,7% de P2O5 e 0,2% de K2O. O ensaio constou de 16 tratamentos compreendendo tôdas as combinações de: 1 0, 2,5, 5 e 10 t/ha de adubo OMS; 2 0 e 80 kg/ha de P2O5 na forma de farinha de ossos e 3 0 e 50 kg/ha de K.,0 na forma de cinzas de café (que também forneceram 20 kg/ha de P2O5. Os adubos foram empregados somente no primeiro ano, 1943-44, mas o ensaio foi conduzido durante três anos. O efeito do fósforo foi muito pequeno (provavelmente porque a terra havia sido adubada com adubos fosfatados nas culturas anteriores ao ensaio, ao passo que o potássio aumentou extraordinariamente a produção no primeiro ano e teve magnífico efeito residual nos dois anos seguintes. O efeito do adubo OMS foi pequeno na ausência do potássio, mas elevou-se substancialmente na presença dêsse nutriente. As doses de 5 e 10 t/ha deram resultados satisfatórios; contudo, aumentaram relativamente mais a produção de colmos que a de grãos. O efeito do nitrogênio de OMS foi rápido, mas aparentemente pouco duradouro. Para melhor aproveitamento do seu nitrogênio, a aplicação do adubo OMS deveria ser feita com freqüência (talvez anualmente e em doses moderadas, completadas, conforme a terra, com fósforo e potássio.This paper reports the results of an experiment conducted in "terra roxa misturada" soil at the Central Experiment Station, Campinas, to study mainly the effect of dried sewage sludge as a fertilizer for corn. The product contained approximately 10% water, 45% organic matter, 2.5% N, 0.7% P2O5, and 0.2% K2O and

  16. Atributos físico-químicos de um Latossolo do Cerrado brasileiro e sua relação com características dendrométricas do eucalipto Dendrometric parameters of eucalyptus and their relationship with physical-chemical characteristics of a Latosol in the Brazilian Cerrado

    Directory of Open Access Journals (Sweden)

    César Gustavo da Rocha Lima

    2010-02-01

    Eucalyptus camaldulensis, apresentou-se como potente indicador da qualidade do solo estudado de Selvíria.Soil mechanical penetration resistance exerts a strong influence on plant development since the root growth as well as crop yield are inversely related to this variable. On the other hand, soil organic matter and pH are also relevant for plant development, for being directly linked to soil nutrient availability. In the 2005/2006 growing season, the following dendrometric parameters of Eucalyptus camaldulensis were analyzed: (a wood volume (WV, (b perimeter at breast height (PBH and c plant height (PH, and the soil attributes: a mechanical penetration resistance (MP, b gravimetric moisture (GR, (c organic matters (OM and (d and pH in a Dystrophic Red Latosol of the Cerrado (savanna-like vegetation. The purpose was to study the linear and spatial correlations among these variables, and to obtain soil quality indices for eucalyptus. A geostatistical grid was installed to collect soil and plant data, with 122 sample points, in an area of 1.98 ha. The variability of the plant data was medium and high, while the variability of the soil data was low, medium and high. The attributes WV, PB, PH, MP, GR, OM, and pH did not change randomly. Rather, they followed well-defined spatial patterns, with ranges between 17 and 169 m. The simple linear correlations among the attributes (plant and soil were low, however significant for the attribute pairs WV vs MP1, WV vs MP5, WV vs OM2 and WV vs pH1. From the spatial correlation viewpoint WV varied significantly, inversely proportional to MP5 and pH1. The soil pH, sampled from the 0-0.15 m layer (pH1, turned out to be the best quality indicator of the studied soil toward estimating eucalyptus wood yield.

  17. Development of a high-performance composite cathode for LT-SOFC

    Science.gov (United States)

    Lee, Byung Wook

    carried out to develop a high-performance composite cathode, in particular, for LT-SOFC operating 650°C and below since stability and compatibility of the materials in interest are secured at low temperatures. First, a nano-sized pyrochlore bismuth ruthenate (Bi2Ru 2O7 or BRO7 shortly), one of the promising cathode materials, was successfully synthesized using glycine-nitrate combustion (GNC) route. Stoichiometric Bi2Ru2O7 without any impurity phase was achieved with considerably improved processing condition, leading to the crystallite size of ~24nm in diameter. Even though the resulting powder tends to agglomerate, resulting in overall 200~400nm size range, it still showed better quality than the one prepared by solid state (SS) reaction route followed by extra milling steps such as vibro-milling and sonication for further particle size reduction. Glycine-to-nitrate (G/N) ratio was found to play a critical role in determining the reaction temperature and reaction duration, thus phase purity and particle morphology (particle size, shape, and agglomeration etc). Composite cathodes of such prepared BRO7 (GNC BRO7) combined with SS erbia-stabilized bismuth oxide, Bi1.6Er0.4O3 or ESB, showed better electrochemical performance than vibro-milled BRO7 (VM BRO7)-SS ESB. ASR values of 0.123Ocm2 at 700°C and 4.59cOm 2 at 500°C, respectively, were achieved, which follows well the trend of particle size effect on performance of composite cathodes. Additionally, the number of processing steps (thus time) was reduced by GNC route. Several issues in regard to synthesis process and characteristics of BRO7 material itself will be addressed in this dissertation. Secondly, a unique in-situ composite cathode synthesis was successfully developed and applied for BRO7-ESB composite cathodes to improve percolation and to reduce agglomeration of each phase inside the cathode so that the effective triple phase boundary (TPB) length was extended. To disperse and stabilize ESB powder in de