Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location

Energy Technology Data Exchange (ETDEWEB)

Hrabe, Nikolas, E-mail: nhrabe@gmail.com [National Institute of Standards and Technology (NIST), 325 Broadway, Stop 647, Boulder, CO 80305-3328 (United States); Quinn, Timothy, E-mail: timothy.quinn@nist.gov [National Institute of Standards and Technology (NIST), 325 Broadway, Stop 647, Boulder, CO 80305-3328 (United States)

2013-06-20

Selective electron beam melting (EBM) is a layer-by-layer additive manufacturing technique that shows great promise for fabrication of medical devices and aerospace components. Before its potential can be fully realized, however, a comprehensive understanding of processing-microstructure-properties relationships is necessary. Titanium alloy (Ti–6Al–4V) parts were built in a newly developed, unique geometry to allow accurate investigation of the following intra-build processing parameters: energy input, orientation, and location. Microstructure evaluation (qualitative prior-β grain size, quantitative α lath thickness), tensile testing, and Vickers microhardness were performed for each specimen. For a wide range of energy input (speed factor 30–40), small differences in mechanical properties (2% change in ultimate tensile strength (UTS) and 3% change in yield strength (YS)) were measured. Vertically built parts were found to have no difference in UTS or YS compared to horizontally built parts, but the percent elongation at break (% EL) was 30% lower. The difference in % EL was attributed to a different orientation of the tensile axis for horizontal and vertical parts compared to the elongated prior-β grain and microstructural texture direction in EBM Ti–6Al–4V. Orientation within the x–y plane as well as location were found to have less than 3% effect on mechanical properties, and it is possible a second order effect of thermal mass contributed to these results.

Study on a Process-oriented Knowledge Management Model

OpenAIRE

Zhang, Lingling; Li, Jun; Zheng, Xiuyu; Li, Xingsen; Shi, Yong

2007-01-01

Now knowledge has become the most important resource of enterprises. Process-oriented knowledge management (POKM) is a new and valuable research field. It may be the most practical method to deal with difficulties in knowledge management. The paper analyzes background, hypothesis and proposes of POKM, define the process knowledge, and give a process-oriented knowledge management model. The model integrates knowledge, process, human, and technology. It can improve the decision support capabili...

Process-Oriented Parallel Programming with an Application to Data-Intensive Computing

OpenAIRE

Givelberg, Edward

2014-01-01

We introduce process-oriented programming as a natural extension of object-oriented programming for parallel computing. It is based on the observation that every class of an object-oriented language can be instantiated as a process, accessible via a remote pointer. The introduction of process pointers requires no syntax extension, identifies processes with programming objects, and enables processes to exchange information simply by executing remote methods. Process-oriented programming is a h...

Human cortical activity evoked by contextual processing in attentional orienting.

Science.gov (United States)

Zhao, Shuo; Li, Chunlin; Uono, Shota; Yoshimura, Sayaka; Toichi, Motomi

2017-06-07

The ability to assess another person's direction of attention is paramount in social communication, many studies have reported a similar pattern between gaze and arrow cues in attention orienting. Neuroimaging research has also demonstrated no qualitative differences in attention to gaze and arrow cues. However, these studies were implemented under simple experiment conditions. Researchers have highlighted the importance of contextual processing (i.e., the semantic congruence between cue and target) in attentional orienting, showing that attentional orienting by social gaze or arrow cues could be modulated through contextual processing. Here, we examine the neural activity of attentional orienting by gaze and arrow cues in response to contextual processing using functional magnetic resonance imaging. The results demonstrated that the influence of neural activity through contextual processing to attentional orienting occurred under invalid conditions (when the cue and target were incongruent versus congruent) in the ventral frontoparietal network, although we did not identify any differences in the neural substrates of attentional orienting in contextual processing between gaze and arrow cues. These results support behavioural data of attentional orienting modulated by contextual processing based on the neurocognitive architecture.

Development of functionally-oriented technological processes of electroerosive processing

Science.gov (United States)

Syanov, S. Yu

2018-03-01

The stages of the development of functionally oriented technological processes of electroerosive processing from the separation of the surfaces of parts and their service functions to the determination of the parameters of the process of electric erosion, which will provide not only the quality parameters of the surface layer, but also the required operational properties, are described.

Radiology image orientation processing for workstation display

Science.gov (United States)

Chang, Chung-Fu; Hu, Kermit; Wilson, Dennis L.

1998-06-01

Radiology images are acquired electronically using phosphor plates that are read in Computed Radiology (CR) readers. An automated radiology image orientation processor (RIOP) for determining the orientation for chest images and for abdomen images has been devised. In addition, the chest images are differentiated as front (AP or PA) or side (Lateral). Using the processing scheme outlined, hospitals will improve the efficiency of quality assurance (QA) technicians who orient images and prepare the images for presentation to the radiologists.

Fast and accurate edge orientation processing during object manipulation

Science.gov (United States)

Flanagan, J Randall; Johansson, Roland S

2018-01-01

Quickly and accurately extracting information about a touched object’s orientation is a critical aspect of dexterous object manipulation. However, the speed and acuity of tactile edge orientation processing with respect to the fingertips as reported in previous perceptual studies appear inadequate in these respects. Here we directly establish the tactile system’s capacity to process edge-orientation information during dexterous manipulation. Participants extracted tactile information about edge orientation very quickly, using it within 200 ms of first touching the object. Participants were also strikingly accurate. With edges spanning the entire fingertip, edge-orientation resolution was better than 3° in our object manipulation task, which is several times better than reported in previous perceptual studies. Performance remained impressive even with edges as short as 2 mm, consistent with our ability to precisely manipulate very small objects. Taken together, our results radically redefine the spatial processing capacity of the tactile system. PMID:29611804

Modeling the Object-Oriented Software Process: OPEN and the Unified Process

NARCIS (Netherlands)

van den Berg, Klaas; Aksit, Mehmet; van den Broek, P.M.

A short introduction to software process modeling is presented, particularly object-oriented modeling. Two major industrial process models are discussed: the OPEN model and the Unified Process model. In more detail, the quality assurance in the Unified Process tool (formally called Objectory) is

The V-Flex, Triangle Orientation, and Catalan Numbers in Hexaflexagons

Science.gov (United States)

Iacob, Ionut E.; McLean, T. Bruce; Wang, Hua

2012-01-01

Regular hexaflexagons mysteriously change faces as you pinch flex them. This paper describes a different flex, the V-flex, which allows the hexahexaflexagon (with only 9 faces under the pinch flex) to have 3420 faces. The article goes on to explain the classification of triangle orientations in a hexaflexagon and gives an example of the…

Modeling the Object-Oriented Software Process: OPEN and the Unified Process

OpenAIRE

van den Berg, Klaas; Aksit, Mehmet; van den Broek, P.M.

1999-01-01

A short introduction to software process modeling is presented, particularly object-oriented modeling. Two major industrial process models are discussed: the OPEN model and the Unified Process model. In more detail, the quality assurance in the Unified Process tool (formally called Objectory) is reviewed.

Adaptive behavior of neighboring neurons during adaptation-induced plasticity of orientation tuning in V1

Directory of Open Access Journals (Sweden)

Shumikhina Svetlana

2009-12-01

Full Text Available Abstract Background Sensory neurons display transient changes of their response properties following prolonged exposure to an appropriate stimulus (adaptation. In adult cat primary visual cortex, orientation-selective neurons shift their preferred orientation after being adapted to a non-preferred orientation. The direction of those shifts, towards (attractive or away (repulsive from the adapter depends mostly on adaptation duration. How the adaptive behavior of a neuron is related to that of its neighbors remains unclear. Results Here we show that in most cases (75%, cells shift their preferred orientation in the same direction as their neighbors. We also found that cells shifting preferred orientation differently from their neighbors (25% display three interesting properties: (i larger variance of absolute shift amplitude, (ii wider tuning bandwidth and (iii larger range of preferred orientations among the cluster of cells. Several response properties of V1 neurons depend on their location within the cortical orientation map. Our results suggest that recording sites with both attractive and repulsive shifts following adaptation may be located in close proximity to iso-orientation domain boundaries or pinwheel centers. Indeed, those regions have a more diverse orientation distribution of local inputs that could account for the three properties above. On the other hand, sites with all cells shifting their preferred orientation in the same direction could be located within iso-orientation domains. Conclusions Our results suggest that the direction and amplitude of orientation preference shifts in V1 depend on location within the orientation map. This anisotropy of adaptation-induced plasticity, comparable to that of the visual cortex itself, could have important implications for our understanding of visual adaptation at the psychophysical level.

Rain: A New Concurrent Process-Oriented Programming Language

OpenAIRE

Brown, Neil C.C.

2006-01-01

This paper details the design of a new concurrent process-oriented programming language, Rain. The language borrows heavily from occam-p and C++ to create a new language based on process-oriented programming, marrying channel-based communication, a clear division between statement and expression, and elements of functional programming. An expressive yet simple type system, coupled with templates, underpins the language. Modern features such as Unicode support and 64-bit integers are included ...

Aspect-Oriented Business Process Modeling with AO4BPMN

Science.gov (United States)

Charfi, Anis; Müller, Heiko; Mezini, Mira

Many crosscutting concerns in business processes need to be addressed already at the business process modeling level such as compliance, auditing, billing, and separation of duties. However, existing business process modeling languages including OMG's Business Process Modeling Notation (BPMN) lack appropriate means for expressing such concerns in a modular way. In this paper, we motivate the need for aspect-oriented concepts in business process modeling languages and propose an aspect-oriented extension to BPMN called AO4BPMN. We also present a graphical editor supporting that extension.

Process-oriented semantic web search

CERN Document Server

Tran, DT

2011-01-01

The book is composed of two main parts. The first part is a general study of Semantic Web Search. The second part specifically focuses on the use of semantics throughout the search process, compiling a big picture of Process-oriented Semantic Web Search from different pieces of work that target specific aspects of the process.In particular, this book provides a rigorous account of the concepts and technologies proposed for searching resources and semantic data on the Semantic Web. To collate the various approaches and to better understand what the notion of Semantic Web Search entails, this bo

Social Workers’ Orientation Toward the Evidence-Based Practice Process

Science.gov (United States)

Kolmer, Deirdre M. Beneken genaamd; Schalk, René

2014-01-01

Objectives: This study assesses social workers’ orientation toward the evidence-based practice (EBP) process and explores which specific variables (e.g. age) are associated. Methods: Data were collected from 341 Dutch social workers through an online survey which included a Dutch translation of the EBP Process Assessment Scale (EBPPAS), along with 13 background/demographic questions. Results: The overall level of orientation toward the EBP process is relatively low. Although respondents are slightly familiar with it and have slightly positive attitudes about it, their intentions to engage in it and their actual engagement are relatively low. Respondents who followed a course on the EBP process as a student are more oriented toward it than those who did not. Social workers under 29 are more familiar with the EBP process than those over 29. Conclusions: We recommend educators to take a more active role in teaching the EBP process to students and social workers. PMID:27630517

Precipitation of grain boundary α in a laser deposited compositionally graded Ti-8Al-xV alloy - an orientation microscopy study

International Nuclear Information System (INIS)

Banerjee, R.; Bhattacharyya, D.; Collins, P.C.; Viswanathan, G.B.; Fraser, H.L.

2004-01-01

A graded ternary Ti-8Al-xV alloy (all compositions in wt%) has been deposited using the laser engineered net-shaping (LENS TM ) process. A compositional gradient in the alloy, from binary Ti-8Al to Ti-8Al-20V, has been achieved within a length of ∼25 mm. The feedstock used for depositing the graded alloy consisted of elemental Ti, Al, and V powders. Due to the columnar growth morphology of the β grains in these LENS TM deposited Ti alloys, the same prior β grain boundary often extends across lengths ∼10 mm. Using orientation microscopy techniques in a scanning electron microscope, the crystallography of precipitation of grain boundary α across the same boundary with changing composition has been investigated in detail. It was observed that while most grain boundary α precipitates maintain a Burgers or near-Burgers orientation relationship with only one of the β grains, a few of these precipitates develop a Burgers orientation relationship with the other β grain. In some rare instances, the grain boundary α did not develop a Burgers or near-Burgers orientation relationship with either β grains. Interestingly, in many cases while the grain boundary α maintained Burgers relationship with one of the β grains, precipitates of two different variants decorated the boundary, in a near-alternate fashion

The effects of process-oriented organizational design on firm performance

NARCIS (Netherlands)

Kohlbacher, M.; Reijers, H.A.

2013-01-01

Purpose – Several organizations choose a process-oriented organizational design as a source for competitive advantage. The purpose of this paper is to explore empirically the relationship between process orientation (PO) and firm performance. The paper considers PO as a multidimensional construct

On the adaptivity gap of stochastic orienteering

NARCIS (Netherlands)

Bansal, N.; Nagarajan, V.; Lee, J.; Vygen, J.

2014-01-01

The input to the stochastic orienteering problem [14] consists of a budget B and metric (V,d) where each vertex v¿¿¿V has a job with a deterministic reward and a random processing time (drawn from a known distribution). The processing times are independent across vertices. The goal is to obtain a

Flow Kinematics and Particle Orientations during Composite Processing

International Nuclear Information System (INIS)

Chiba, Kunji

2007-01-01

The mechanism of orientation of fibers or thin micro-particles in various flows involving the processing of composite materials has not been fully understood although it is much significant to obtain the knowledge of the processing operations of particle reinforced composites as well as to improve the properties of the advanced composites. The objective of this paper is to introduce and well understand the evolution of the particle orientation in a suspension flow and flow kinematics induced by suspended particles by means of our two research work

Models for Trustworthy Service and Process Oriented Systems

DEFF Research Database (Denmark)

Lopez, Hugo Andres

2010-01-01

Service and process-oriented systems promise to provide more efective business and work processes and more flexible and adaptable enterprise IT systems. However, the technologies and standards are still young and unstable, making research in their theoretical foundations increasingly important. Our...... studies focus on two dichotomies: the global/local views of service interactions, and their imperative/declarative specification. A global view of service interactions describes a process as a protocol for interactions, as e.g. an UML sequence diagram or a WS-CDL choreography. A local view describes...... thesis is that we can provide a theoretical framework based on typed concurrent process and concurrent constraint calculi for the specication, analysis and verication of service and process oriented system designs which bridges the global and local view and combines the imperative and declarative...

Towards an organisation-wide process-oriented organisation of care: A literature review

Directory of Open Access Journals (Sweden)

Groenewegen Peter P

2011-01-01

Full Text Available Abstract Background Many hospitals have taken actions to make care delivery for specific patient groups more process-oriented, but struggle with the question how to deal with process orientation at hospital level. The aim of this study is to report and discuss the experiences of hospitals with implementing process-oriented organisation designs in order to derive lessons for future transitions and research. Methods A literature review of English language articles on organisation-wide process-oriented redesigns, published between January 1998 and May 2009, was performed. Results Of 329 abstracts identified, 10 articles were included in the study. These articles described process-oriented redesigns of five hospitals. Four hospitals tried to become process-oriented by the implementation of coordination measures, and one by organisational restructuring. The adoption of the coordination mechanism approach was particularly constrained by the functional structure of hospitals. Other factors that hampered the redesigns in general were the limited applicability of and unfamiliarity with process improvement techniques. Conclusions Due to the limitations of the evidence, it is not known which approach, implementation of coordination measures or organisational restructuring (with additional coordination measures, produces the best results in which situation. Therefore, more research is needed. For this research, the use of qualitative methods in addition to quantitative measures is recommended to contribute to a better understanding of preconditions and contingencies for an effective application of approaches to become process-oriented. Hospitals are advised to take the factors for failure described into account and to take suitable actions to counteract these obstacles on their way to become process-oriented organisations.

Process-oriented microstructure evolution of V{sub ss}-V{sub 3}Si-V{sub 5}SiB{sub 2}; Prozessabhaengige Mikrostrukturausbildung von V{sub ss}-V{sub 3}Si-V{sub 5}SiB{sub 2}-Werkstoffen

Energy Technology Data Exchange (ETDEWEB)

Krueger, Manja; Koeppe-Grabow, Birte [Magdeburg Univ. (Germany)

2017-05-15

Vanadium silicide alloys are potentially interesting high temperature materials, since they combine high mechanical strength at temperatures of up to 1 000 C with a low density. In this study, the microstructures of innovative V-Si-B high temperature materials are examined using different analytical methods. The selected V-9Si-13B model alloy was manufactured using a powder metallurgical process route as well as an ingot metallurgical process. The alloys show a vanadium solid solution phase as well as the high-strength silicide phases V{sub 3}Si and V{sub 5}SiB{sub 2}. Especially for the powder metallurgically fabricated alloy, showing finely dispersed phases, the quantification of microstructural constituents is difficult. The phases, however, can be separated from one another via computer tomography.

Project Communication in Functions, Process and Project-Oriented Industiral Companies

Science.gov (United States)

Samáková, Jana; Koltnerová, Kristína; Rybanský, Rudolf

2012-12-01

The article is focused on the project communication management. Industrial enterprises, which use project management must constantly search the new ways for improving. One of the possibilities is the change of management from a functional oriented to the projectoriented or process-oriented. Process-oriented and project-oriented companies have better project communication management during the all project life cycle. Communication in the project is a very important factor. According to the arguments of several authors, one of the biggest problem is that threaten the success of the project is just the communication. In each project is an important pillar - and that is communication. Only on the base of communication can the project move forward and achieve the target.

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

Energy Technology Data Exchange (ETDEWEB)

Simonelli, M., E-mail: M.Simonelli@lboro.ac.uk [Department of Materials, Loughborough University, Loughborough LE11 3TU (United Kingdom); Tse, Y.Y. [Department of Materials, Loughborough University, Loughborough LE11 3TU (United Kingdom); Tuck, C. [Additive Manufacturing and 3D Printing Research Group, Faculty of Engineering, The University of Nottingham, Nottingham NG7 2RD (United Kingdom)

2014-10-20

Recent research on the additive manufacturing (AM) of Ti alloys has shown that the mechanical properties of the parts are affected by the characteristic microstructure that originates from the AM process. To understand the effect of the microstructure on the tensile properties, selective laser melted (SLM) Ti–6Al–4V samples built in three different orientations were tensile tested. The investigated samples were near fully dense, in two distinct conditions, as-built and stress relieved. It was found that the build orientation affects the tensile properties, and in particular the ductility of the samples. The mechanical anisotropy of the parts was discussed in relation to the crystallographic texture, phase composition and the predominant fracture mechanisms. Fractography and electron backscatter diffraction (EBSD) results indicate that the predominant fracture mechanism is intergranular fracture present along the grain boundaries and thus provide and explain the typical fracture surface features observed in fracture AM Ti–6Al–4V.

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

International Nuclear Information System (INIS)

Simonelli, M.; Tse, Y.Y.; Tuck, C.

2014-01-01

Recent research on the additive manufacturing (AM) of Ti alloys has shown that the mechanical properties of the parts are affected by the characteristic microstructure that originates from the AM process. To understand the effect of the microstructure on the tensile properties, selective laser melted (SLM) Ti–6Al–4V samples built in three different orientations were tensile tested. The investigated samples were near fully dense, in two distinct conditions, as-built and stress relieved. It was found that the build orientation affects the tensile properties, and in particular the ductility of the samples. The mechanical anisotropy of the parts was discussed in relation to the crystallographic texture, phase composition and the predominant fracture mechanisms. Fractography and electron backscatter diffraction (EBSD) results indicate that the predominant fracture mechanism is intergranular fracture present along the grain boundaries and thus provide and explain the typical fracture surface features observed in fracture AM Ti–6Al–4V

On the adaptivity gap of stochastic orienteering

NARCIS (Netherlands)

Bansal, N.; Nagarajan, V.

2013-01-01

The input to the stochastic orienteering problem consists of a budget $B$ and metric $(V,d)$ where each vertex $v$ has a job with deterministic reward and random processing time (drawn from a known distribution). The processing times are independent across vertices. The goal is to obtain a

On the Adaptivity Gap of Stochastic Orienteering

NARCIS (Netherlands)

N. Bansal (Nikhil); V. Nagarajan

2013-01-01

htmlabstractThe input to the stochastic orienteering problem consists of a budget B and metric (V,d) where each vertex v has a job with deterministic reward and random processing time (drawn from a known distribution). The processing times are independent across vertices. The goal is to obtain a

A Christian educational perspective on the process oriented approach to intrinsic motivation

OpenAIRE

Mechaéla Scott

1992-01-01

Within the classroom context, albeit school or university, intrinsic motivation can effectively be described and changed if a process-oriented approach is employed. The question is posed whether a process-oriented approach to motivation is acceptable to Christian education. To answer this question, intrinsic motivation and the process-oriented approach to motivation are described. A Christian view of self-knowledge and control, which are the main components of a process-oricnted approach to m...

Integrate-and-fire vs Poisson models of LGN input to V1 cortex: noisier inputs reduce orientation selectivity.

Science.gov (United States)

Lin, I-Chun; Xing, Dajun; Shapley, Robert

2012-12-01

One of the reasons the visual cortex has attracted the interest of computational neuroscience is that it has well-defined inputs. The lateral geniculate nucleus (LGN) of the thalamus is the source of visual signals to the primary visual cortex (V1). Most large-scale cortical network models approximate the spike trains of LGN neurons as simple Poisson point processes. However, many studies have shown that neurons in the early visual pathway are capable of spiking with high temporal precision and their discharges are not Poisson-like. To gain an understanding of how response variability in the LGN influences the behavior of V1, we study response properties of model V1 neurons that receive purely feedforward inputs from LGN cells modeled either as noisy leaky integrate-and-fire (NLIF) neurons or as inhomogeneous Poisson processes. We first demonstrate that the NLIF model is capable of reproducing many experimentally observed statistical properties of LGN neurons. Then we show that a V1 model in which the LGN input to a V1 neuron is modeled as a group of NLIF neurons produces higher orientation selectivity than the one with Poisson LGN input. The second result implies that statistical characteristics of LGN spike trains are important for V1's function. We conclude that physiologically motivated models of V1 need to include more realistic LGN spike trains that are less noisy than inhomogeneous Poisson processes.

Implementing BPM systems: the role of process orientation

NARCIS (Netherlands)

Reijers, H.A.

2006-01-01

Purpose – The presentation and validation of a checklist that can be used to determine an organization's process orientation prior to a business process management systems (BPMS) implementation. Its aim is to help predict the success of BPMS implementation on the basis of the identified process

Towards a Web-Based Handbook of Generic, Process-Oriented Learning Designs

Science.gov (United States)

Marjanovic, Olivera

2005-01-01

Process-oriented learning designs are innovative learning activities that include a set of inter-related learning tasks and are generic (could be used across disciplines). An example includes a problem-solving process widely used in problem-based learning today. Most of the existing process-oriented learning designs are not documented, let alone…

BPMN as a Communication Language for the Process- and Event-Oriented Perspectives in Fact-Oriented Conceptual Models

Science.gov (United States)

Bollen, Peter

In this paper we will show how the OMG specification of BPMN (Business Process Modeling Notation) can be used to model the process- and event-oriented perspectives of an application subject area. We will illustrate how the fact-oriented conceptual models for the information-, process- and event perspectives can be used in a 'bottom-up' approach for creating a BPMN model in combination with other approaches, e.g. the use of a textual description. We will use the common doctor's office example as a running example in this article.

The implementation of process orientation at a Swedish hospital.

Science.gov (United States)

Fältholm, Ylva; Jansson, Anna

2008-01-01

During the last decade, as a response to the need for inter- as well as intra-organizational integration, management models initially developed for industry have been spread to health care organizations. Based on 62 in-depth interviews, this qualitative study aims at describing and analyzing the limited success of implementation of process orientation at a Swedish hospital and in doing so, the traditional and the critical approaches are combined. Applying a traditional approach, the limited success of the implementation of process orientation is explained in terms of difficulties to challenge deeply institutionalized organizational routines and the inter-disciplinary boundaries. This might be condensed to the dilemma of how to maintain and develop the specialization of the medical profession while focusing process rather than function and how to enhance inter-organizational integration without hampering intra-organizational collaboration. Applying a critical approach, the limited success is explained in terms of a differentiated translation process and in terms of separation of talk and practice. This means that process orientation, notwithstanding that it might be an efficient tool for the type of integration needed, might be regarded as part of a change discourse, aiming at conveying a picture of an efficient and modern organization.

A novice's process of object-oriented programming

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Kölling, Michael

2006-01-01

Exposing students to the process of programming is merely implied but not explicitly addressed in texts on programming which appear to deal with 'program' as a noun rather than as a verb.We present a set of principles and techniques as well as an informal but systematic process of decomposing...... a programming problem. Two examples are used to demonstrate the application of process and techniques.The process is a carefully down-scaled version of a full and rich software engineering process particularly suited for novices learning object-oriented programming. In using it, we hope to achieve two things...

A Christian educational perspective on the process oriented approach to intrinsic motivation

Directory of Open Access Journals (Sweden)

Mechaéla Scott

1992-03-01

Full Text Available Within the classroom context, albeit school or university, intrinsic motivation can effectively be described and changed if a process-oriented approach is employed. The question is posed whether a process-oriented approach to motivation is acceptable to Christian education. To answer this question, intrinsic motivation and the process-oriented approach to motivation are described. A Christian view of self-knowledge and control, which are the main components of a process-oricnted approach to motivation, is subsequently given and the process-oriented approach to motivation is subjected to a Christian evaluation. The conclusions are drawn that this approach can fruitfully be used in Christian education, given that self-knowledge and control arc interpreted within the context of the concept of the student as God’s representative on earth and the fact that God equipped him adequately with cognitive, affective and conative abilities to respond to His call to discover, develop and rule the earth actively.

The orientation dependence of the hydrogen distribution within Mo/V (110) and (001) multilayered artificial superlattices

CERN Document Server

Hjörvarsson, B; Olafsson, S; Karlsson, E B; Birch, J; Sundgren, J E

1997-01-01

We have investigated the hydrogen distribution within multilayered Mo/V (110) and (001) artificial superlattices. The hydrogen concentration, determined by the sup 1 H( sup 1 sup 5 N, alpha gamma) sup 1 sup 2 C nuclear resonance reaction, is found to decrease with decreasing layer thickness. The decrease is attributed to an interface region with reduced hydrogen content. The extension of this interface region is found to be two monolayers in Mo/V (110), compared to the previously reported three monolayers in Mo/V (001) superlattices. In the (110) oriented samples the relative amount of H in the interface region decreases with increasing average H content (H/V (atomicratio) approx. 0.3-0.5). This effect is shown to be related to the orientation of the hydrogen planes with respect to the boundaries implied by the Mo/V interfaces. The hydrogen induced volume change, obtained by conventional theta-2 theta x-ray diffraction (XRD) and reciprocal space mapping, is found to be smaller for the (110) samples than for t...

Mathematical Processes: A Viewpoint-oriented Manipulation Perspective

DEFF Research Database (Denmark)

Badie, Farshad

2008-01-01

View-point oriented manipulation of concepts can be helpful for generating new ideas in basic sciences and in the meantime, justifying the processes that are principally meaningful to the related disciplines. Mathematics, as a major ground for basic sciences, seems to be an appropriate exemplar t...

Process-oriented Design Methodology for the (Inter-) Organizational Intellectual Capital Management

OpenAIRE

Galeitzke, Mila; Oertwig, Nicole; Orth, Ronald; Kohl, Holger

2016-01-01

The development of a process-oriented design methodology for the visualization of intellectual capital in organisational business processes is described in this contribution. A tangible and intangible resource-oriented taxonomy in an integrated enterprise modelling environment is established. The comprehensive assessment, allocation and referencing of intellectual capital (human, structural and relational capital) counters the underutilization of available intellectual capital and allows for ...

Transmission electron microscopy study of the microstructure and crystallographic orientation relationships in V/Ag multilayers

International Nuclear Information System (INIS)

Wei Qiangmin; Misra, Amit

2010-01-01

Microstructures and orientation relationships in sputter-deposited, polycrystalline V/Ag multilayers with different individual thicknesses ranging from 1 to 50 nm were investigated. It was found that the wavy morphology of layers resulting from competitive kinetic limitations of deposited atoms gives rise to a variety of orientation relationships between two adjacent layers. At the top or bottom of curved layers Kurdjumov-Sachs and Nishiyama-Wasserman orientations were dominant, while on the slopes of the wavy interfaces close-packed face-centered cubic and body-centered cubic planes joined each other. As a consequence, Bain, Pitsch and many intermediate orientation relationships were generated. In most cases intermediate orientations with 1-3 o deviations from the parallel planes or directions in standard orientations were observed. The tilted interfaces, followed by the introduction of disconnections to relieve misfit stress, had a tendency to form an invariant habit plane in which the strain was completely relieved. A model describing disconnections and invariant planes can explain the observed deviations and orientation of the habit plane. Calculations of the evolution of the surface morphology on the basis of the kinetic behavior of deposits were performed to facilitate interpretation of the formation of the wavy structure.

Automating the Object-Oriented Software Development Process: Workshop Report

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

1998-01-01

Cost-effective realization of robust, adaptable and reusable software systems demands efficient and effective management of the overall software production process. Current object-oriented methods are not completely formalized and lack the ability of reasoning about the quality of processes and

Automating the Object-Oriented Software Development Process: Workshop Report

NARCIS (Netherlands)

Aksit, Mehmet; Demeyer, S.; Bosch, H.G.P.; Tekinerdogan, B.

Cost-effective realization of robust, adaptable and reusable software systems demands efficient and effective management of the overall software production process. Current object-oriented methods are not completely formalized and lack the ability of reasoning about the quality of processes and

Optical band gap demarcation around 2.15 eV depending on preferred orientation growth in red HgI{sub 2} films

Energy Technology Data Exchange (ETDEWEB)

Tyagi, Pankaj, E-mail: pankajtyagicicdu@gmail.com

2017-04-01

Thermally evaporated stoichiometric films of red HgI{sub 2} show preferred orientation growth with either (102) or (002) orientation. The as grown films shows a change from one preferred orientation to another depending on their thickness, open-air heat-treatment and in-situ heat treatment of films. The in-situ heat-treatment of thermally evaporated stoichiometric films of red HgI{sub 2} with preferred growth of (102) orientation shows a gradual linear decrease in film thickness with in-situ heat-treatment temperature. On in-situ heat-treatment above 80 °C, it is found that HgI{sub 2} films become thinner than 900 nm, which are otherwise difficult to grow due to high vapor pressure of HgI{sub 2}. For these films the preferred orientation also changed from (102) to (002). The optical band gap (E{sub g}) also found to increase linearly with in-situ heat-treatment temperature. It is interesting to note that in-situ heat-treated films having (002) orientation had higher values of optical band gap than (102) orientation films. On combining these results with those of as grown and open-air heat-treated red HgI{sub 2} films reported in the literature, it is evident that there exists an optical band gap demarcation around 2.15 eV for red HgI{sub 2} thin films depending on their preferred orientation growth. Films with (102) orientation are found to have optical band gap less than 2.15 eV and those with (002) orientation are found to have optical band gap more than 2.15 eV. This is irrespective of the physical mean of obtaining the preferred orientation. The preferred orientation can be achieved by either physical means such as growing films with higher thickness, heat-treating them for short duration in open air or heat-treating them in-situ.

Tudengite hea esinemine Willem C. Vis'i nimelisel harjutuskohtuvõistlusel

Index Scriptorium Estoniae

2013-01-01

XX Willem C. Vis’i nimelise rahvusvahelise kaubandusõiguse harjutuskohtuvõistlusel Viinis saavutas Tartu Ülikooli õigusteaduskonna võistkond (Kristina Promet, Jaana Lints, Edgar-Kaj Velbri ja Sandra-Kristin Noot) 290 ülikooli seast 84. koha

An adaptive orienting theory of error processing.

Science.gov (United States)

Wessel, Jan R

2018-03-01

The ability to detect and correct action errors is paramount to safe and efficient goal-directed behaviors. Existing work on the neural underpinnings of error processing and post-error behavioral adaptations has led to the development of several mechanistic theories of error processing. These theories can be roughly grouped into adaptive and maladaptive theories. While adaptive theories propose that errors trigger a cascade of processes that will result in improved behavior after error commission, maladaptive theories hold that error commission momentarily impairs behavior. Neither group of theories can account for all available data, as different empirical studies find both impaired and improved post-error behavior. This article attempts a synthesis between the predictions made by prominent adaptive and maladaptive theories. Specifically, it is proposed that errors invoke a nonspecific cascade of processing that will rapidly interrupt and inhibit ongoing behavior and cognition, as well as orient attention toward the source of the error. It is proposed that this cascade follows all unexpected action outcomes, not just errors. In the case of errors, this cascade is followed by error-specific, controlled processing, which is specifically aimed at (re)tuning the existing task set. This theory combines existing predictions from maladaptive orienting and bottleneck theories with specific neural mechanisms from the wider field of cognitive control, including from error-specific theories of adaptive post-error processing. The article aims to describe the proposed framework and its implications for post-error slowing and post-error accuracy, propose mechanistic neural circuitry for post-error processing, and derive specific hypotheses for future empirical investigations. © 2017 Society for Psychophysiological Research.

Designing dependable process-oriented software - a CSP-based approach

NARCIS (Netherlands)

Jovanovic, D.S.

2006-01-01

This thesis advocates dependability as a crucial aspect of software quality. Process orientation,as it is defined in this thesis, concentrates on the notion of a process as a basic building component of a dataflow-centred software architecture. The dependability approach in the proposed variant of

Career-Oriented Performance Tasks in Chemistry: Effects on Students Integrated Science Process Skills

OpenAIRE

Allen A. Espinosa; Sheryl Lyn C. Monterola; Amelia E. Punzalan

2013-01-01

The study was conducted to assess the effectiveness of Career-Oriented Performance Task (COPT) approach against the traditional teaching approach (TTA) in enhancing students’ integrated science process skills. Specifically, it sought to find out if students exposed to COPT have higher integrated science process skills than those students exposed to the traditional teaching approach (TTA). Career-Oriented Performance Task (COPT) approach aims to integrate career-oriented examples and inquiry-b...

Selective Electron Beam Manufacturing of Ti-6Al-4V Strips: Effect of Build Orientation, Columnar Grain Orientation, and Hot Isostatic Pressing on Tensile Properties

Science.gov (United States)

Wang, J.; Tang, H. P.; Yang, K.; Liu, N.; Jia, L.; Qian, M.

2018-03-01

Many novel designs for additive manufacturing (AM) contain thin-walled (≤ 3 mm) sections in different orientations. Selective electron beam melting (SEBM) is particularly suited to AM of such thin-walled titanium components because of its high preheating temperature and high vacuum. However, experimental data on SEBM of Ti-6Al-4V thin sections remains scarce because of the difficulty and high cost of producing long, thin and smooth strip tensile specimens (see Fig. 1). In this study, 80 SEBM Ti-6Al-4V strips (180 mm long, 42 mm wide, 3 mm thick) were built both vertically (V-strips) and horizontally (H-strips). Their density, microstructure and tensile properties were investigated. The V-strips showed clearly higher tensile strengths but lower elongation than the H-strips. Hot isostatic pressing (HIP) produced the same lamellar α-β microstructures in terms of the average α-lath thickness in both types of strips. The retained prior-β columnar grain boundaries after HIP showed no measurable influence on the tensile properties, irrespective of their length and orientation, because of the formation of randomly distributed fine α-laths.[Figure not available: see fulltext.

Comparison of Single Ti6Al4V Struts Made Using Selective Laser Melting and Electron Beam Melting Subject to Part Orientation

Directory of Open Access Journals (Sweden)

Volker Weißmann

2017-03-01

Full Text Available The use of additive manufacturing technologies to produce lightweight or functional structures is widespread. Especially Ti6Al4V plays an important role in this development field and parts are manufactured and analyzed with the aim to characterize the mechanical properties of open-porous structures and to generate scaffolds with properties specific to their intended application. An SLM and an EBM process were used respectively to fabricate the Ti6Al4V single struts. For mechanical characterization, uniaxial compression tests and hardness measurements were conducted. Furthermore, the struts were manufactured in different orientations for the determination of the mechanical properties. Roughness measurements and a microscopic characterization of the struts were also carried out. Some parts were characterized following heat treatment (hot isostatic pressing. A functional correlation was found between the compressive strength and the slenderness ratio (λ as well as the equivalent diameter (d and the height (L of EBM and SLM parts. Hardness investigations revealed considerable differences related to the microstructure. An influence of heat treatment as well as of orientation could be determined. In this work, we demonstrate the influence of the fabrication quality of single struts, the roughness and the microstructure on mechanical properties as a function of orientation.

Market Orientation Capabilities: A Study of Learning Processes in Market-Oriented Companies

OpenAIRE

Silkoset, Ragnhild

2009-01-01

The literature operates with three perspectives on market orientation. These include market orientation as behavior (Kohli and Jaworski 1990; Narver and Slater 1990), market orientation as a unique resource (Hunt and Morgan 1995) and market orientation as a dynamic learning capability (Sinkula 1994; Day 1994b). A company's level of market orientation will vary with regard to the perspectives, including factors affecting a company’s degree of market orientation and the effect...

Classical Process diagrams and Service oriented Architecture

Directory of Open Access Journals (Sweden)

Milan Mišovič

2013-01-01

Full Text Available SOA (Service Oriented Architecture has played in the last two decades a very useful role in the design philosophy of the target software. The basic units of software for which the mentioned philosophy is valid are called services. Generally it is counted that the advance implementation of services is given by using so–called Web services that are on the platform of the Internet 2.0. Naturally, there has been counted also with the fact that the services will be used in software applications designed by professional programmers. Later, the concept of software services was supported by the enterprise concept of the SOE type (Service oriented Enterprise and by the creation of the SOA paradigm.Many computer scientists, including Thomas Erl – doyen of SOA, do not understand SOA either as an integrated technology or as a development methodology. Proofs of this statement are in the following definitions.SOA is a form of technology architecture that adheres to the principles of service – orientation. When realized through the Web services technology platform, SOA establishes the potential to support and promote these principles throughout the business processes and automation domains of an enterprise (Erl, 2006. Thomas Erl (Erl, 2007 has expressed the idea of SOA implementation using the following definition.SOA establishes an architectural model that aides to enhance the efficiency, agility, and productivity of an enterprise by positioning services as the primary means through which solution logic is represented in support of the realization of strategic goals associated with service-oriented computing. Nevertheless the key principles, on which SOA is constructed (Erl, 2006, are not significantly reflected in any of the previous definitions. Some of the mentioned principles are still included at least in the more free definitions of SOA, for example (Barry, 2003.A service-oriented architecture is essentially a collection of services. These

Mirror-Image Confusions: Implications for Representation and Processing of Object Orientation

Science.gov (United States)

Gregory, Emma; McCloskey, Michael

2010-01-01

Perceiving the orientation of objects is important for interacting with the world, yet little is known about the mental representation or processing of object orientation information. The tendency of humans and other species to confuse mirror images provides a potential clue. However, the appropriate characterization of this phenomenon is not…

Influence of crystallographic orientation on the fracture toughness of strongly textured Ti--6Al--4V

International Nuclear Information System (INIS)

Bowen, A.W.

1978-01-01

Fracture toughness values for six test piece orientations in a strongly textured 57-mm thick rolled and annealed Ti--6Al--4V bar have been related to their crystallographic orientations. The K/sub Ic/ values, ranging from 46.3 to 93.3 MPa/m, could be divided into two groups. High values (74.7 to 93.3 MPa/m) were obtained when a crystallographic deformation mode ([1010] or [1122] slip) was parallel to the planes of maximum shear stress for plane strain conditions, and the significant fractographic feature for this group was a clearly defined stretch zone. In the second group, where crystallographic deformation modes were not aligned with the planes of maximum shear stress, much lower K/sub Ic/ values were recorded (46.3 to 50.7 MPa/m). In this case there was no stretch zone and, in addition, some test pieces appeared, in effect, to have delaminated in the immediate vicinity of the crack tip. Similar trends were also indicated by the results of Charpy impact tests. The influence of in-plane elastic anisotropy on fracture toughness is discussed, and the importance of test piece geometry highlighted. From the results it could be inferred that high toughness in anisotropic materials is possible only in certain orientations; stretch zone formation and fatigue striation formation are by the same mechanical process; and there will be significantly different critical crack sizes in textured titanium alloy components

On the adaptivity gap of stochastic orienteering

NARCIS (Netherlands)

Bansal, N.; Nagarajan, V.

2015-01-01

The input to the stochastic orienteering problem (Gupta et al. in SODA, pp 1522–1538,  2012) consists of a budget B and metric (V, d) where each vertex(Formula presented.) has a job with a deterministic reward and a random processing time (drawn from a known distribution). The processing times are

A study on the effectiveness of the orientation process and cross-cultural training for the expatriate

Directory of Open Access Journals (Sweden)

Maxwell Agabu Phiri

2015-11-01

Full Text Available This paper focuses on the effectiveness of the orientation process and cross-cultural training (CCT and its impact on cross-cultural adjustment for the expatriate. The objective of the study on which this paper is based is to evaluate the effectiveness of the orientation process for expatriates and to determine the need for a separate orientation and culture training. By improving the orientation process and identifying a need for culture specific training, the company can thus eliminate relocation and replacement costs. The main objective of this research is to design a guideline for the implementation of a culture specific orientation process for the expatriate. This will be done based on the recommendations made by the respondents of the survey. The paper reviews different writings in the areas of cross-cultural training, cross-cultural adjustment, the orientation process and the expatriate. The study highlights specific issues regarding cultural training, assignment failure and success, and the expatriate experiences. The research is motivated by the need to reduce assignment failure and the subsequent costs associated with engaging expatriation, and ensure smooth transition into a new culture. The research methodology utilized was qualitative, based on structured questionnaires and personal interviews. The study attempts to recommend, based on the findings, a culture centered orientation process for the expatriate

Control-Oriented Models for SO Fuel Cells from the Angle of V&V: Analysis, Simplification Possibilities, Performance

Directory of Open Access Journals (Sweden)

Ekaterina Auer

2017-12-01

Full Text Available In this paper, we take a look at the analysis and parameter identification for control-oriented, dynamic models for the thermal subsystem of solid oxide fuel cells (SOFC from the systematized point of view of verification and validation (V&V. First, we give a possible classification of models according to their verification degree which depends, for example, on the kind of arithmetic used for both formulation and simulation. Typical SOFC models, consisting of several coupled differential equations for gas preheaters and the temperature distribution in the stack module, do not have analytical solutions because of spatial nonlinearity. Therefore, in the next part of the paper, we describe in detail two possible ways to simplify such models so that the underlying differential equations can be solved analytically while still being sufficiently accurate to serve as the basis for control synthesis. The simplifying assumption is to approximate the heat capacities of the gases by zero-order polynomials (or first-oder polynomials, respectively in the temperature. In the last, application-oriented part of the paper, we identify the parameters of these models as well as compare their performance and their ability to reflect the reality with the corresponding characteristics of models in which the heat capacities are represented by quadratic polynomials (the usual case. For this purpose, the framework UniVerMeC (Unified Framework for Verified GeoMetric Computations is used, which allows us to employ different kinds of arithmetics including the interval one. This latter possibility ensures a high level of reliability of simulations and of the subsequent validation. Besides, it helps to take into account bounded uncertainty in measurements.

Improving Process Quality by Means of Accurate and Traceable Calibration of Flow Devices with Process-oriented Liquids.

Science.gov (United States)

Bissig, Hugo; Tschannen, Martin; de Huu, Marc

2018-03-30

Calibration of flow devices is important in several areas of pharmaceutical, flow chemistry and health care applications where volumetric dosage or delivery at given flow rates are crucial for the process. Although most of the flow devices are measuring flow rates of process-oriented liquids, their calibrations are often performed with water as calibration liquid. It is recommended to perform the calibrations of the flow devices with process-oriented liquids as the liquid itself might influence the performance of the flow devices. Therefore, METAS has developed facilities with METAS flow generators to address the issue of measuring with process-oriented liquids for flow rates from 400 ml/min down to 50 nl/min with uncertainties from 0.07-0.9 %. Traceability is guaranteed through the calibration of the generated flow rates of the METAS flow generators by means of the dynamic gravimetric method where a liquid of well-known density and a well-controlled evaporation rate is used. The design of the milli-flow facility will be discussed as well as first measurement results of the METAS flow generators in the range of micro-flow and milli-flow using water and other liquids.

Construction the organizational structure of the MTE oriented on the business-processes management

OpenAIRE

Kohut, Y.

2011-01-01

The methodical recommendations for the construction the organizational structure of the MTE oriented on the business-processes management has been developed by substantiating of basic works, maintenance, sequence and orientation, and also methods and receptions of their realization.

Prediction of particle orientation in simple upsetting process of NdFeB magnets

Energy Technology Data Exchange (ETDEWEB)

Chang, Chao-Cheng; Hsiao, Po-Jen [Department of Mold and Die Engineering, National Kaohsiung University of Applied Sciences, 415 Chien-Kung Road, Sanmin District, Kaohsiung 80778, Taiwan (China); You, Jr-Shiang; Chen, Yen-Ju; Chang, Can-Xun [Metal Forming Technology Section, Metal Processing R and D Department, Metal Industries Research and Development Centre, 1001 Kaonan Highway, Kaohsiung 81160, Taiwan (China)

2013-12-16

The magnetic properties of NdFeB magnets are strongly affected by crystallographic texture which is highly associated with particle orientation. This study proposed a method for predicting the particle orientation in the simple upsetting process of NdFeB magnets. The method is based on finite element simulation with flow net analysis. The magnets in a cylindrical form were compressed by two flat dies in a chamber filled with argon at 750°C. Three forming speeds were taken into account in order to obtain flow stress curves used in simulations. The micrographs of the cross sections of the deformed magnets show that the particle deformation significantly increases with the compression. The phenomenon was also predicted by the proposed method. Both simulated and experimental results show that the inhomogeneity of the texture of the NdFeB magnets can be increased by the simple upsetting process. The predicted particle orientations were in a good agreement with those examined in the deformed magnets. The proposed method for predicting particle orientations can also be used in other forming processes of NdFeB magnets.

Prediction of particle orientation in simple upsetting process of NdFeB magnets

International Nuclear Information System (INIS)

Chang, Chao-Cheng; Hsiao, Po-Jen; You, Jr-Shiang; Chen, Yen-Ju; Chang, Can-Xun

2013-01-01

The magnetic properties of NdFeB magnets are strongly affected by crystallographic texture which is highly associated with particle orientation. This study proposed a method for predicting the particle orientation in the simple upsetting process of NdFeB magnets. The method is based on finite element simulation with flow net analysis. The magnets in a cylindrical form were compressed by two flat dies in a chamber filled with argon at 750°C. Three forming speeds were taken into account in order to obtain flow stress curves used in simulations. The micrographs of the cross sections of the deformed magnets show that the particle deformation significantly increases with the compression. The phenomenon was also predicted by the proposed method. Both simulated and experimental results show that the inhomogeneity of the texture of the NdFeB magnets can be increased by the simple upsetting process. The predicted particle orientations were in a good agreement with those examined in the deformed magnets. The proposed method for predicting particle orientations can also be used in other forming processes of NdFeB magnets

Work Process Oriented Learning via Mobile Devices – Theoretical Basics and Examples for a (New Didactical Approach

Directory of Open Access Journals (Sweden)

Georg Spöttl

2012-04-01

Full Text Available Two problems can be identified which counteract the need for further training: On the one hand the clientele of skilled workers is not necessarily keen on further training. On the other hand the time and cost pressure within the sector does not offer any room for time-consuming further training measures far away from the workplace. This is why the project “Virtual Learning on the building site – (Vila-b” was realized in cooperation with the project partners of the University of Bremen (Working group »Digital Media« of the Centre for Information Technology as well as from the economy (Arbeitskreis ökologischer Holzbau e. V. and Claus Holm, pm|c. The project team has tested a concept which facilitated learning adapted to the occupational reality and supported by the advantages of digital media. The central didactical elements for the development of this further training course are the contextual and methodological orientation to real work processes as well as the use of digital mobile media which facilitate learning directly at the workplace. The present article starts with a description of the theoretical basics for learning within the work process and discusses the didactical elements which are necessary for work process oriented learning with digital and mobile media.

Proposing a Process-Oriented Systems Research for Systems Thinking Development

Directory of Open Access Journals (Sweden)

Jae Eon Yu

2017-04-01

Full Text Available This paper discusses systems thinking development from Churchman’s systems ideas related to critical systems practice that appreciates the use of systems methods from sociolinguistic perspectives and poststructuralist thought. Systems research enabled us to understand and reinterpret Churchman’s philosophy and systems approach through the works of Deleuze and Foucault. Based upon the interpretation of Churchman’s philosophy and systems approach, I propose ‘process-oriented systems research’ developed from the use of social appreciative process and Churchman’s metasystem approach. By applying a metasystem approach into practice, I basically appreciate Deleuzian ethics and Foucault’s theory of discourse in order to deal with issues of power and knowledge, and metaethics or moral epistemology, where the meaning of good or bad is discussed. A detailed account of an application of process-oriented systems research is given to demonstrate how I use systems methods to examine the usefulness of the systems research in practice.

An application of object-oriented programming to process simulation

International Nuclear Information System (INIS)

Robinson, J.T.; Otaduy, P.J.

1988-01-01

This paper discusses the application of object-oriented programming to dynamic simulation of continuous processes. Processes may be modeled using this technique as a collection of objects which communicate with each other via message passing. Arriving messages invoke methods that describe the state and/or dynamic behavior of the receiving object. The objects fall into four broad categories actual plant components such as pumps, pipes, and tanks, abstract objects such as heat sources and conductors, plant systems such as flow loops, and simulation control and interface objects. This technique differs from traditional approaches to process simulation, in which the process is represented by either a system of differential equations or a block diagram of mathematical operators. The use of objects minimizes the representational gap between the model and actual process. From the users point of view, construction of a simulation model becomes equivalent to drawing a plant schematic. As an example application, a package developed for the simulation of nuclear power plants is described. The package allows users to build simulation models by selecting iconic representations of plant components from a menu and connecting them with a mouse. Objects for generating a mathematical model of the system and for controlling the simulation are automatically generated, freeing the user to concentrate on describing his process. This example illustrates the use of object-oriented programming to create a highly interactive and automated simulation environment. 2 figs

The nursing process in crisis-oriented psychiatric home care.

Science.gov (United States)

Boomsma, J; Dingemans, C A; Dassen, T W

1997-08-01

Crisis-oriented psychiatric home care is a recent development in the Dutch mental health care system. Because of the difference between psychiatric care in the home and in the hospital, an action research project was initiated. This project was directed at the nursing process and the nurses' role and skills in psychiatric home care. The main goal of the project was to describe and to standardize nursing diagnoses and interventions used in crisis-oriented and long-term psychiatric home care. The development of supporting methods of assessment and intervention were also important aspects of this project. In this article a crisis-oriented psychiatric home care programme and the first developmental research activities within this programme are described. To support the nursing process, the development of a nursing record and an assessment-format, based on Gordon's Functional Health Patterns (FHP), took place. By means of content analysis of 61 nursing records, the most frequently stated nursing diagnoses, based upon the North American Nursing Diagnosis Association (NANDA) taxonomy, were identified. The psychiatric diagnostic categories of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) were also collected. The most common categories found were those of mood disorders and schizophrenia or psychotic disorders. Seventy-five per cent of the nursing diagnoses showed up within four FHP: role-relationship, coping-stress tolerance, self-perception/self-concept and activity-exercise. The nursing diagnosis of 'ineffective individual coping' was stated most frequently. This is not surprising because of the similarities in the definitions of this nursing diagnosis and the concept of 'crisis' to which the psychiatric home care programme is oriented. Further research activities will be focused on standardization of nursing diagnosis and the interventions that nurses undertake in this type of care.

A Model-driven and Service-oriented framework for the business process improvement

Directory of Open Access Journals (Sweden)

Andrea Delgado

2010-07-01

Full Text Available Business Process Management (BPM importance and benefits for organizations to focus on their business processes is nowadays broadly recognized, as business and technology areas are embracing and adopting the paradigm. The Service Oriented Computing (SOC paradigm bases software development on services to realize business processes. The implementation of business processes as services helps in reducing the gap between these two areas, easing the communication and understanding of business needs. The Model Driven Development (MDD paradigm bases software development in models, metamodels and languages that allow transformation between them. The automatic generation of service models from business process models is a key issue to support the separation of its definition from its technical implementation. In this article, we present MINERVA framework which applies Model Driven Development (MDD and Service Oriented Computing (SOC paradigms to business processes for the continuous business process improvement in organizations, giving support to the stages defined in the business process lifecycle from modeling to evaluation of its execution.

Strategic orientations and cooperation of external agents in the innovation process of rural enterprises

Directory of Open Access Journals (Sweden)

José Francisco dos Reis Neto

Full Text Available ABSTRACT: This article provides empirical evidence for the relationship between the market orientation, entrepreneurial orientation, and collaboration of external actors in the processes of incremental and radical innovations in rural enterprises. The research tested two sets of assumptions: first, the relation between contributions of strategic orientation and innovation processes; and second, collaborations of external stakeholders in the implementation of innovation processes. Data were collected from 208 rural enterprises and analyzed with the use of techniques of partial least squares structural equation modeling. Results showed that the market orientation contributes to the development of incremental innovation, and that the entrepreneurial orientation contributes to the implementation of the incremental and radical innovations. Specific agents (buyers, suppliers of goods and services, consultants, and others producers, collaborate positively in implementing incremental innovation; however, generic agents do not. The generic agents (universities and specialized public organizations are the ones that most intervene in radical innovations. The use of consistent theory in the areas of strategy, marketing and management in identifying that some of their causal relationships are confirmed for rural businesses unlike others, due to the structure of the market and the products produced by them.

Process parameters, orientation, and functional properties of melt-processed bulk Y-Ba-Cu-O superconductors

International Nuclear Information System (INIS)

Zakharchenko, I.V.; Terryll, K.M.; Rao, K.V.; Balachandran, U.

1995-03-01

This study compared the microstructure, texturing, and functional properties (critical currents) of YBa 2 Cu 3 O 7-x -based bulk pellets that were prepared by the quench-melt-growth-process (QMGP), melt-textured growth (MTG), and conventional solid-state reaction (SSR) approaches. Using two X-ray diffraction (XRD) methods, θ-2θ, and rocking curves, the authors found that the individual grains of two melt-processed pellets exhibited remarkable preferred orientational alignment (best rocking curve width = 3.2 degree). However, the direction of the preferred orientation among the grains was random. Among the three types of bulk materials studied, the QMGP sample was found to have the best J c values, ∼ 4,500 A/cm 2 at 77 K in a field of 2 kG, as determined from SQUID magnetic data

Elastic and inelastic processes in H+ + CH2 collisions below the 1.5 keV regime

International Nuclear Information System (INIS)

Suno, Hiroya; Rai, Sachchida N.; Liebermann, Heinz-Peter; Buenker, Robert J.; Kimura, Mineo; Janev, R.K.

2005-01-01

Electron capture and direct elastic scattering in collisions of H + ions with CH 2 molecules between 0.5 and 1.5 keV are theoretically investigated. A molecular representation is adopted within a fully quantum-mechanical approach. Differential cross sections (DCSs) for elastic scattering and electron capture are calculated at 1.5 keV and 0.5 keV for different molecular orientations. Our results indicate that electron capture dynamics and corresponding electron-capture cross sections depend substantially on the molecular orientation, thus revealing a strong steric effect. (author)

[Process-oriented cost calculation in interventional radiology. A case study].

Science.gov (United States)

Mahnken, A H; Bruners, P; Günther, R W; Rasche, C

2012-01-01

Currently used costing methods such as cost centre accounting do not sufficiently reflect the process-based resource utilization in medicine. The goal of this study was to establish a process-oriented cost assessment of percutaneous radiofrequency (RF) ablation of liver and lung metastases. In each of 15 patients a detailed task analysis of the primary process of hepatic and pulmonary RF ablation was performed. Based on these data a dedicated cost calculation model was developed for each primary process. The costs of each process were computed and compared with the revenue for in-patients according to the German diagnosis-related groups (DRG) system 2010. The RF ablation of liver metastases in patients without relevant comorbidities and a low patient complexity level results in a loss of EUR 588.44, whereas the treatment of patients with a higher complexity level yields an acceptable profit. The treatment of pulmonary metastases is profitable even in cases of additional expenses due to complications. Process-oriented costing provides relevant information that is needed for understanding the economic impact of treatment decisions. It is well suited as a starting point for economically driven process optimization and reengineering. Under the terms of the German DRG 2010 system percutaneous RF ablation of lung metastases is economically reasonable, while RF ablation of liver metastases in cases of low patient complexity levels does not cover the costs.

Research on Process-oriented Spatio-temporal Data Model

Directory of Open Access Journals (Sweden)

XUE Cunjin

2016-02-01

Full Text Available According to the analysis of the present status and existing problems of spatio-temporal data models developed in last 20 years,this paper proposes a process-oriented spatio-temporal data model (POSTDM,aiming at representing,organizing and storing continuity and gradual geographical entities. The dynamic geographical entities are graded and abstracted into process objects series from their intrinsic characteristics,which are process objects,process stage objects,process sequence objects and process state objects. The logical relationships among process entities are further studied and the structure of UML models and storage are also designed. In addition,through the mechanisms of continuity and gradual changes impliedly recorded by process objects,and the modes of their procedure interfaces offered by the customized ObjcetStorageTable,the POSTDM can carry out process representation,storage and dynamic analysis of continuity and gradual geographic entities. Taking a process organization and storage of marine data as an example,a prototype system (consisting of an object-relational database and a functional analysis platform is developed for validating and evaluating the model's practicability.

An Aspect-Oriented Framework for Business Process Improvement

Science.gov (United States)

Pourshahid, Alireza; Mussbacher, Gunter; Amyot, Daniel; Weiss, Michael

Recently, many organizations invested in Business Process Management Systems (BPMSs) in order to automate and monitor their processes. Business Activity Monitoring is one of the essential modules of a BPMS as it provides the core monitoring capabilities. Although the natural step after process monitoring is process improvement, most of the existing systems do not provide the means to help users with the improvement step. In this paper, we address this issue by proposing an aspect-oriented framework that allows the impact of changes to business processes to be explored with what-if scenarios based on the most appropriate process redesign patterns among several possibilities. As the four cornerstones of a BPMS are process, goal, performance and validation views, these views need to be aligned automatically by any approach that intends to support automated improvement of business processes. Our framework therefore provides means to reflect process changes also in the other views of the business process. A health care case study presented as a proof of concept suggests that this novel approach is feasible.

A Petri Net-Based Software Process Model for Developing Process-Oriented Information Systems

Science.gov (United States)

Li, Yu; Oberweis, Andreas

Aiming at increasing flexibility, efficiency, effectiveness, and transparency of information processing and resource deployment in organizations to ensure customer satisfaction and high quality of products and services, process-oriented information systems (POIS) represent a promising realization form of computerized business information systems. Due to the complexity of POIS, explicit and specialized software process models are required to guide POIS development. In this chapter we characterize POIS with an architecture framework and present a Petri net-based software process model tailored for POIS development with consideration of organizational roles. As integrated parts of the software process model, we also introduce XML nets, a variant of high-level Petri nets as basic methodology for business processes modeling, and an XML net-based software toolset providing comprehensive functionalities for POIS development.

Product-oriented Software Certification Process for Software Synthesis

Science.gov (United States)

Nelson, Stacy; Fischer, Bernd; Denney, Ewen; Schumann, Johann; Richardson, Julian; Oh, Phil

2004-01-01

The purpose of this document is to propose a product-oriented software certification process to facilitate use of software synthesis and formal methods. Why is such a process needed? Currently, software is tested until deemed bug-free rather than proving that certain software properties exist. This approach has worked well in most cases, but unfortunately, deaths still occur due to software failure. Using formal methods (techniques from logic and discrete mathematics like set theory, automata theory and formal logic as opposed to continuous mathematics like calculus) and software synthesis, it is possible to reduce this risk by proving certain software properties. Additionally, software synthesis makes it possible to automate some phases of the traditional software development life cycle resulting in a more streamlined and accurate development process.

Interocular suppression in amblyopia for global orientation processing.

Science.gov (United States)

Zhou, Jiawei; Huang, Pi-Chun; Hess, Robert F

2013-04-22

We developed a dichoptic global orientation coherence paradigm to quantify interocular suppression in amblyopia. This task is biased towards ventral processing and allows comparison with two other techniques-global motion processing, which is more dorsally biased, and binocular phase combination, which most likely reflects striate function. We found a similar pattern for the relationship between coherence threshold and interocular contrast curves (thresholds vs. interocular contrast ratios or TvRs) in our new paradigm compared with those of the previous dichoptic global motion coherence paradigm. The effective contrast ratios at balance point (where the signals from the two eyes have equal weighting) in our new paradigm were larger than those of the dichoptic global motion coherence paradigm but less than those of the binocular phase combination paradigm. The measured effective contrast ratios in the three paradigms were also positively correlated with each other, with the two global coherence paradigms having the highest correlation. We concluded that: (a) The dichoptic global orientation coherence paradigm is effective in quantifying interocular suppression in amblyopia; and (b) Interocular suppression, while sharing a common suppression mechanism at the early stage in the pathway (e.g., striate cortex), may have additional extra-striate contributions that affect both dorsal and ventral streams differentially.

Creating a market-oriented product innovation process : A contingency approach

NARCIS (Netherlands)

Kok, R.A.W.; Biemans, W.G.

This study analyzes how and why a firm's change program to create a market-oriented innovation process depends on its environmental, innovational and organizational context. Based on an organizational-learning capabilities framework, the results from a multiple case study indicate how a firm's

Unconscious processing of facial attractiveness: invisible attractive faces orient visual attention.

Science.gov (United States)

Hung, Shao-Min; Nieh, Chih-Hsuan; Hsieh, Po-Jang

2016-11-16

Past research has proven human's extraordinary ability to extract information from a face in the blink of an eye, including its emotion, gaze direction, and attractiveness. However, it remains elusive whether facial attractiveness can be processed and influences our behaviors in the complete absence of conscious awareness. Here we demonstrate unconscious processing of facial attractiveness with three distinct approaches. In Experiment 1, the time taken for faces to break interocular suppression was measured. The results showed that attractive faces enjoyed the privilege of breaking suppression and reaching consciousness earlier. In Experiment 2, we further showed that attractive faces had lower visibility thresholds, again suggesting that facial attractiveness could be processed more easily to reach consciousness. Crucially, in Experiment 3, a significant decrease of accuracy on an orientation discrimination task subsequent to an invisible attractive face showed that attractive faces, albeit suppressed and invisible, still exerted an effect by orienting attention. Taken together, for the first time, we show that facial attractiveness can be processed in the complete absence of consciousness, and an unconscious attractive face is still capable of directing our attention.

Tuning polymorphism and orientation in organic semiconductor thin films via post-deposition processing.

Science.gov (United States)

Hiszpanski, Anna M; Baur, Robin M; Kim, Bumjung; Tremblay, Noah J; Nuckolls, Colin; Woll, Arthur R; Loo, Yueh-Lin

2014-11-05

Though both the crystal structure and molecular orientation of organic semiconductors are known to impact charge transport in thin-film devices, separately accessing different polymorphs and varying the out-of-plane molecular orientation is challenging, typically requiring stringent control over film deposition conditions, film thickness, and substrate chemistry. Here we demonstrate independent tuning of the crystalline polymorph and molecular orientation in thin films of contorted hexabenzocoronene, c-HBC, during post-deposition processing without the need to adjust deposition conditions. Three polymorphs are observed, two of which have not been previously reported. Using our ability to independently tune the crystal structure and out-of-plane molecular orientation in thin films of c-HBC, we have decoupled and evaluated the effects that molecular packing and orientation have on device performance in thin-film transistors (TFTs). In the case of TFTs comprising c-HBC, polymorphism and molecular orientation are equally important; independently changing either one affects the field-effect mobility by an order of magnitude.

Sex differences in face processing are mediated by handedness and sexual orientation.

Science.gov (United States)

Brewster, Paul W H; Mullin, Caitlin R; Dobrin, Roxana A; Steeves, Jennifer K E

2011-03-01

Previous research has demonstrated sex differences in face processing at both neural and behavioural levels. The present study examined the role of handedness and sexual orientation as mediators of this effect. We compared the performance of LH (left-handed) and RH (right-handed) heterosexual and homosexual male and female participants on a face recognition memory task. Our main findings were that homosexual males have better face recognition memory than both heterosexual males and homosexual women. We also demonstrate better face processing in women than in men. Finally, LH heterosexual participants had better face recognition than LH homosexual participants and also tended to be better than RH heterosexual participants. These findings are consistent with differences in the organisation and laterality of face-processing mechanisms as a function of sex, handedness, and sexual orientation.

Effect of cold work and processing orientation on the SCC behavior of Alloy 600

International Nuclear Information System (INIS)

Moshier, W.C.; Brown, C.M.

1999-01-01

Cold work accelerates SCC growth rates in Alloy 600. However, the variation in crack growth rates generated from cold worker material has been significant, and the effect has been difficult to quantify. A study was performed in hydrogenated water adjusted to pH 10.2 to systematically evaluate the effect of cold work on Alloy 600 as a function of temperature, amount of cold work, stress intensity factor, and processing orientation. Cold work was introduced into the material by either tensile prestraining or cold rolling plate product. Crack growth rates were determined between 252 and 360 C, stress intensity factors between 21 and 55 MPa√m, and yield strengths between 201 and 827 MPa. The material with the highest yield strength was cold rolled and tested in the longitudinal-transverse (LT) and short-transverse (ST) orientations. Crack growth rates increased with increasing temperature, stress intensity factor, and yield strength. Furthermore, crack growth rates were a strong function of the processing orientation in the cold rolled plate, with growth rates being approximately an order of magnitude greater in the ST orientation compared to the LT orientation. Crack growth rates in the LT orientation were measured between 0.003 and 1.95 x 10 -9 m/s and between 0.066 and 6.3 x 10 -9 m/s in the ST orientation. Activation energies were slightly greater in the ST orientation, ranging from 154 to 191 kcal/mole, compared to activation energies between 126 and 157 kJ/mole in the LT orientation. The results of this study demonstrate that although cold work can be used to accelerate SCC, the orientation of crack growth can significantly affect the results, and must be taken into account when analyzing data from cold worked material

FRET measurements of kinesin neck orientation reveal a structural basis for processivity and asymmetry.

Science.gov (United States)

Martin, Douglas S; Fathi, Reza; Mitchison, Timothy J; Gelles, Jeff

2010-03-23

As the smallest and simplest motor enzymes, kinesins have served as the prototype for understanding the relationship between protein structure and mechanochemical function of enzymes in this class. Conventional kinesin (kinesin-1) is a motor enzyme that transports cargo toward the plus end of microtubules by a processive, asymmetric hand-over-hand mechanism. The coiled-coil neck domain, which connects the two kinesin motor domains, contributes to kinesin processivity (the ability to take many steps in a row) and is proposed to be a key determinant of the asymmetry in the kinesin mechanism. While previous studies have defined the orientation and position of microtubule-bound kinesin motor domains, the disposition of the neck coiled-coil remains uncertain. We determined the neck coiled-coil orientation using a multidonor fluorescence resonance energy transfer (FRET) technique to measure distances between microtubules and bound kinesin molecules. Microtubules were labeled with a new fluorescent taxol donor, TAMRA-X-taxol, and kinesin derivatives with an acceptor fluorophore attached at positions on the motor and neck coiled-coil domains were used to reconstruct the positions and orientations of the domains. FRET measurements to positions on the motor domain were largely consistent with the domain orientation determined in previous studies, validating the technique. Measurements to positions on the neck coiled-coil were inconsistent with a radial orientation and instead demonstrated that the neck coiled-coil is parallel to the microtubule surface. The measured orientation provides a structural explanation for how neck surface residues enhance processivity and suggests a simple hypothesis for the origin of kinesin step asymmetry and "limping."

Highly oriented Bi-system bulk sample prepared by a decomposition-crystallization process

International Nuclear Information System (INIS)

Xi Zhengping; Zhou Lian; Ji Chunlin

1992-01-01

A decomposition-crystallization method, preparing highly oriented Bi-system bulk sample is reported. The effects of processing parameter, decomposition temperature, cooling rate and post-treatment condition on texture and superconductivity are investigated. The method has successfully prepared highly textured Bi-system bulk samples. High temperature annealing does not destroy the growing texture, but the cooling rate has some effect on texture and superconductivity. Annealing in N 2 /O 2 atmosphere can improve superconductivity of the textured sample. The study on the superconductivity of the Bi(Pb)-Sr-Ca-Cu-O bulk material has been reported in numerous papers. The research on J c concentrates on the tape containing the 2223 phase, with very few studies on the J c of bulk sample. The reason for the lack of studies is that the change of superconducting phases at high temperatures has not been known. The authors have reported that the 2212 phase incongruently melted at about 875 degrees C and proceeded to orient the c-axis perpendicular to the surface in the process of crystallization of the 2212 phase. Based on that result, a decomposition-crystallization method was proposed to prepare highly oriented Bi-system bulk sample. In this paper, the process is described in detail and the effects of processing parameters on texture and superconductivity are reported

Implementation of Process Oriented Guided Inquiry Learning (POGIL) in Engineering

Science.gov (United States)

Douglas, Elliot P.; Chiu, Chu-Chuan

2013-01-01

This paper describes implementation and testing of an active learning, team-based pedagogical approach to instruction in engineering. This pedagogy has been termed Process Oriented Guided Inquiry Learning (POGIL), and is based upon the learning cycle model. Rather than sitting in traditional lectures, students work in teams to complete worksheets…

Biomimetic processing of oriented crystalline ceramic layers

Energy Technology Data Exchange (ETDEWEB)

Cesarano, J.; Shelnutt, J.A.

1997-10-01

The aim of this project was to develop the capabilities for Sandia to fabricate self assembled Langmuir-Blodgett (LB) films of various materials and to exploit their two-dimensional crystalline structure to promote the growth of oriented thin films of inorganic materials at room temperature. This includes the design and synthesis of Langmuir-active (amphiphilic) organic molecules with end groups offering high nucleation potential for various ceramics. A longer range goal is that of understanding the underlying principles, making it feasible to use the techniques presented in this report to fabricate unique oriented films of various materials for electronic, sensor, and membrane applications. Therefore, whenever possible, work completed in this report was completed with the intention of addressing the fundamental phenomena underlying the growth of crystalline, inorganic films on template layers of highly organized organic molecules. This problem was inspired by biological processes, which often produce exquisitely engineered structures via templated growth on polymeric layers. Seashells, for example, exhibit great toughness owing to their fine brick-and-mortar structure that results from templated growth of calcium carbonate on top of layers of ordered organic proteins. A key goal in this work, therefore, is to demonstrate a positive correlation between the order and orientation of the template layer and that of the crystalline ceramic material grown upon it. The work completed was comprised of several parallel efforts that encompassed the entire spectrum of biomimetic growth from solution. Studies were completed on seashells and the mechanisms of growth for calcium carbonate. Studies were completed on the characterization of LB films and the capability developed for the in-house fabrication of these films. Standard films of fatty acids were studied as well as novel polypeptides and porphyrins that were synthesized.

Orientation-specific contextual modulation of the fMRI BOLD response to luminance and chromatic gratings in human visual cortex.

Science.gov (United States)

McDonald, J Scott; Seymour, Kiley J; Schira, Mark M; Spehar, Branka; Clifford, Colin W G

2009-05-01

The responses of orientation-selective neurons in primate visual cortex can be profoundly affected by the presence and orientation of stimuli falling outside the classical receptive field. Our perception of the orientation of a line or grating also depends upon the context in which it is presented. For example, the perceived orientation of a grating embedded in a surround tends to be repelled from the predominant orientation of the surround. Here, we used fMRI to investigate the basis of orientation-specific surround effects in five functionally-defined regions of visual cortex: V1, V2, V3, V3A/LO1 and hV4. Test stimuli were luminance-modulated and isoluminant gratings that produced responses similar in magnitude. Less BOLD activation was evident in response to gratings with parallel versus orthogonal surrounds across all the regions of visual cortex investigated. When an isoluminant test grating was surrounded by a luminance-modulated inducer, the degree of orientation-specific contextual modulation was no larger for extrastriate areas than for V1, suggesting that the observed effects might originate entirely in V1. However, more orientation-specific modulation was evident in extrastriate cortex when both test and inducer were luminance-modulated gratings than when the test was isoluminant; this difference was significant in area V3. We suggest that the pattern of results in extrastriate cortex may reflect a refinement of the orientation-selectivity of surround suppression specific to the colour of the surround or, alternatively, processes underlying the segmentation of test and inducer by spatial phase or orientation when no colour cue is available.

Comparative analysis of gradient-field-based orientation estimation methods and regularized singular-value decomposition for fringe pattern processing.

Science.gov (United States)

Sun, Qi; Fu, Shujun

2017-09-20

Fringe orientation is an important feature of fringe patterns and has a wide range of applications such as guiding fringe pattern filtering, phase unwrapping, and abstraction. Estimating fringe orientation is a basic task for subsequent processing of fringe patterns. However, various noise, singular and obscure points, and orientation data degeneration lead to inaccurate calculations of fringe orientation. Thus, to deepen the understanding of orientation estimation and to better guide orientation estimation in fringe pattern processing, some advanced gradient-field-based orientation estimation methods are compared and analyzed. At the same time, following the ideas of smoothing regularization and computing of bigger gradient fields, a regularized singular-value decomposition (RSVD) technique is proposed for fringe orientation estimation. To compare the performance of these gradient-field-based methods, quantitative results and visual effect maps of orientation estimation are given on simulated and real fringe patterns that demonstrate that the RSVD produces the best estimation results at a cost of relatively less time.

[Process orientation as a tool of strategic approaches to corporate governance and integrated management systems].

Science.gov (United States)

Sens, Brigitte

2010-01-01

The concept of general process orientation as an instrument of organisation development is the core principle of quality management philosophy, i.e. the learning organisation. Accordingly, prestigious quality awards and certification systems focus on process configuration and continual improvement. In German health care organisations, particularly in hospitals, this general process orientation has not been widely implemented yet - despite enormous change dynamics and the requirements of both quality and economic efficiency of health care processes. But based on a consistent process architecture that considers key processes as well as management and support processes, the strategy of excellent health service provision including quality, safety and transparency can be realised in daily operative work. The core elements of quality (e.g., evidence-based medicine), patient safety and risk management, environmental management, health and safety at work can be embedded in daily health care processes as an integrated management system (the "all in one system" principle). Sustainable advantages and benefits for patients, staff, and the organisation will result: stable, high-quality, efficient, and indicator-based health care processes. Hospitals with their broad variety of complex health care procedures should now exploit the full potential of total process orientation. Copyright © 2010. Published by Elsevier GmbH.

Does case-mix based reimbursement stimulate the development of process-oriented care delivery?

Science.gov (United States)

Vos, Leti; Dückers, Michel L A; Wagner, Cordula; van Merode, Godefridus G

2010-11-01

Reimbursement based on the total care of a patient during an acute episode of illness is believed to stimulate management and clinicians to reduce quality problems like waiting times and poor coordination of care delivery. Although many studies already show that this kind of case-mix based reimbursement leads to more efficiency, it remains unclear whether care coordination improved as well. This study aims to explore whether case-mix based reimbursement stimulates development of care coordination by the use of care programmes, and a process-oriented way of working. Data for this study were gathered during the winter of 2007/2008 in a survey involving all Dutch hospitals. Descriptive and structural equation modelling (SEM) analyses were conducted. SEM reveals that adoption of the case-mix reimbursement within hospitals' budgeting processes stimulates hospitals to establish care programmes by the use of process-oriented performance measures. However, the implementation of care programmes is not (yet) accompanied by a change in focus from function (the delivery of independent care activities) to process (the delivery of care activities as being connected to a chain of interdependent care activities). This study demonstrates that hospital management can stimulate the development of care programmes by the adoption of case-mix reimbursement within hospitals' budgeting processes. Future research is recommended to confirm this finding and to determine whether the establishment of care programmes will in time indeed lead to a more process-oriented view of professionals. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Social Workers' Orientation toward the Evidence-Based Practice Process: A Dutch Survey

Science.gov (United States)

van der Zwet, Renske J. M.; Kolmer, Deirdre M. Beneken genaamd; Schalk, René

2016-01-01

Objectives: This study assesses social workers' orientation toward the evidence-based practice (EBP) process and explores which specific variables (e.g. age) are associated. Methods: Data were collected from 341 Dutch social workers through an online survey which included a Dutch translation of the EBP Process Assessment Scale (EBPPAS), along with…

Combined object-oriented approach for development of process control systems

International Nuclear Information System (INIS)

Antonova, I.; Batchkova, I.

2013-01-01

Full text: The traditional approaches for development of software control system in automation an information technology based on a directly code creation are no longer effective and successful enough. The response to these challenges is the Model Driven Engineering (MDE) or its counter part in the field of architectures Model Driven Architecture (MDA). One of the most promising approach supporting MDE and MDA is UML. It does not specify a methodology for software or system design but aims to provide an integrated modeling framework for structural, functional and behavior descriptions. The success of UML in many object-oriented approaches led to an idea of applying UML to design of multi agent systems. The approach proposed in this paper applies modified Harmony methodology and is based on the combined use of UML profile for system engineering, IEC61499 standard and FIPA standard protocols. The benefits of object-oriented paradigm and the models of IEC61499 standard are extended with UML/SysML and FIPA notations. The development phases are illustrated with the UML models of a simple process control system. The main benefits of using the proposed approach can be summarized as: it provides consistency in the syntax and underlying semantics; increases the potential and likelihood of reuse; supports the whole software development life cycle in the field of process control. Including the SysML features, based on extended activity and parametric diagrams, flow ports and items to the proposed approach opens the possibilities for modeling of continuous system and support the development in field of process control. Another advantage, connected to the UML/MARTE profile is the possibility for analysis of the designed system and detailed design of the hardware and software platform of the modeled application. Key words: object-oriented modeling, control system, UML, SysML, IEC 61499

Variations on agent-oriented programming

Directory of Open Access Journals (Sweden)

Dalia Baziukė

2017-12-01

Full Text Available Occurrence of the agent paradigm and its further applications have stimulated the emergence of new concepts and methodologies in computer science. Today terms like multi-agent system, agent-oriented methodology, and agent-oriented programming (AOP are widely used. The aim of this paper is to clarify the validity of usage of the terms AOP and AOP language. This is disclosed in two phases of an analysis process. Determining to which concepts, terms like agent, programming, object-oriented analysis and design, object-oriented programming, and agent-oriented analysis and design correspond is accomplished in the first phase. Analysis of several known agent system engineering methodologies in terms of key concepts used, final resulting artifacts, and their relationship with known programming paradigms and modern tools for agent system development is performed in the second phase. The research shows that in most cases in the final phase of agent system design and in the coding stage, the main artifact is an object, defined according to the rules of the object-oriented paradigm. Hence, we say that the computing society still does not have AOP owing to the lack of an AOP language. Thus, the term AOP is very often incorrectly assigned to agent system development frameworks that in most cases, transform agents into objects.DOI: 10.15181/csat.v5i1.1361

300% Enhancement of Carrier Mobility in Uniaxial-Oriented Perovskite Films Formed by Topotactic-Oriented Attachment.

Science.gov (United States)

Kim, Dong Hoe; Park, Jaehong; Li, Zhen; Yang, Mengjin; Park, Ji-Sang; Park, Ik Jae; Kim, Jin Young; Berry, Joseph J; Rumbles, Garry; Zhu, Kai

2017-06-01

Organic-inorganic perovskites with intriguing optical and electrical properties have attracted significant research interests due to their excellent performance in optoelectronic devices. Recent efforts on preparing uniform and large-grain polycrystalline perovskite films have led to enhanced carrier lifetime up to several microseconds. However, the mobility and trap densities of polycrystalline perovskite films are still significantly behind their single-crystal counterparts. Here, a facile topotactic-oriented attachment (TOA) process to grow highly oriented perovskite films, featuring strong uniaxial-crystallographic texture, micrometer-grain morphology, high crystallinity, low trap density (≈4 × 10 14 cm -3 ), and unprecedented 9 GHz charge-carrier mobility (71 cm 2 V -1 s -1 ), is demonstrated. TOA-perovskite-based n-i-p planar solar cells show minimal discrepancies between stabilized efficiency (19.0%) and reverse-scan efficiency (19.7%). The TOA process is also applicable for growing other state-of-the-art perovskite alloys, including triple-cation and mixed-halide perovskites. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synaptic Correlates of Low-Level Perception in V1.

Science.gov (United States)

Gerard-Mercier, Florian; Carelli, Pedro V; Pananceau, Marc; Troncoso, Xoana G; Frégnac, Yves

2016-04-06

The computational role of primary visual cortex (V1) in low-level perception remains largely debated. A dominant view assumes the prevalence of higher cortical areas and top-down processes in binding information across the visual field. Here, we investigated the role of long-distance intracortical connections in form and motion processing by measuring, with intracellular recordings, their synaptic impact on neurons in area 17 (V1) of the anesthetized cat. By systematically mapping synaptic responses to stimuli presented in the nonspiking surround of V1 receptive fields, we provide the first quantitative characterization of the lateral functional connectivity kernel of V1 neurons. Our results revealed at the population level two structural-functional biases in the synaptic integration and dynamic association properties of V1 neurons. First, subthreshold responses to oriented stimuli flashed in isolation in the nonspiking surround exhibited a geometric organization around the preferred orientation axis mirroring the psychophysical "association field" for collinear contour perception. Second, apparent motion stimuli, for which horizontal and feedforward synaptic inputs summed in-phase, evoked dominantly facilitatory nonlinear interactions, specifically during centripetal collinear activation along the preferred orientation axis, at saccadic-like speeds. This spatiotemporal integration property, which could constitute the neural correlate of a human perceptual bias in speed detection, suggests that local (orientation) and global (motion) information is already linked within V1. We propose the existence of a "dynamic association field" in V1 neurons, whose spatial extent and anisotropy are transiently updated and reshaped as a function of changes in the retinal flow statistics imposed during natural oculomotor exploration. The computational role of primary visual cortex in low-level perception remains debated. The expression of this "pop-out" perception is often assumed

Religiosity and parenting: recent directions in process-oriented research.

Science.gov (United States)

Goeke-Morey, Marcie C; Cummings, E Mark

2017-06-01

Most faith traditions, in principle, promote family life and positive parent-child relationships. In recent years, research has moved beyond questions of whether religion supports positive parenting towards addressing more nuanced process-oriented questions, including how, why, and when religion is linked with adaptive or maladaptive parenting. Relations between religion and multiple specific parenting behaviors (e.g., involvement, warmth, authoritative parenting, communication) are identified, including contexts for when and why relations between religion and parenting are adaptive or maladaptive. A next step for research is the development and testing of theoretical models to more comprehensively account for process relations between religion and parenting. Copyright © 2017 Elsevier Ltd. All rights reserved.

Diseño de multiplexores hibridos para sistemas de comunicaciones ópticas mediante la concatenación de dispositivos selectivos en longitud de onda

OpenAIRE

Rodríguez Horche, Paloma; López-Amo Sainz, Manuel; Muriel Fernández, Miguel Ángel; Martín Pereda, José Antonio

1987-01-01

La creciente demandada de información por parte del abonado hace necesaria la inclusión de nuevos servicios como la transmisión da datos de alta y baja velocidad, señales de vídeo, etc. La única solución que promete viabilidad es la que puede desarrollarse con Fibra Óptica.

Process-oriented Approach to Designing Immersion Assessments

Science.gov (United States)

2014-02-01

Command (USSOCOM) Command Language Program Manager (CLPM) Advanced Competencies Course in a presentation titled, The Language Needs Assessment Process and...Techniques can be very similar • Physical v. psychological fidelity • Johns (2006) Discrete Context—task, social and physical • 4Ps : Purpose

Unleashing the Effectiveness of Process-oriented Information Systems: Problem Analysis, Critical Success Factors, Implications

NARCIS (Netherlands)

Mutschler, B.B.; Reichert, M.U.; Bumiller, J.

2008-01-01

Process-oriented information systems (IS) aim at the computerized support of business processes. So far, contemporary IS have often fail to meet this goal. To better understand this drawback, to systematically identify its rationales, and to derive critical success factors for business process

Results on the Coherent Interaction of High Energy Electrons and Photons in Oriented Single Crystals

CERN Document Server

Apyan, A.; Badelek, B.; Ballestrero, S.; Biino, C.; Birol, I.; Cenci, P.; Connell, S.H.; Eichblatt, S.; Fonseca, T.; Freund, A.; Gorini, B.; Groess, R.; Ispirian, K.; Ketel, T.J.; Kononets, Yu.V.; Lopez, A.; Mangiarotti, A.; van Rens, B.; Sellschop, J.P.F.; Shieh, M.; Sona, P.; Strakhovenko, V.; Uggerhoj, E.; Uggerhj, Ulrik Ingerslev; Unel, G.; Velasco, M.; Vilakazi, Z.Z.; Wessely, O.; Kononets, Yu.V.

2005-01-01

The CERN-NA-59 experiment examined a wide range of electromagnetic processes for multi-GeV electrons and photons interacting with oriented single crystals. The various types of crystals and their orientations were used for producing photon beams and for converting and measuring their polarisation. The radiation emitted by 178 GeV unpolarised electrons incident on a 1.5 cm thick Si crystal oriented in the Coherent Bremsstrahlung (CB) and the String-of-Strings (SOS) modes was used to obtain multi-GeV linearly polarised photon beams. A new crystal polarimetry technique was established for measuring the linear polarisation of the photon beam. The polarimeter is based on the dependence of the Coherent Pair Production (CPP) cross section in oriented single crystals on the direction of the photon polarisation with respect to the crystal plane. Both a 1 mm thick single crystal of Germanium and a 4 mm thick multi-tile set of synthetic Diamond crystals were used as analyzers of the linear polarisation. A birefringence ...

Designing an economic-driven evaluation framework for process-oriented software technologies.

NARCIS (Netherlands)

Mutschler, B.B.; Bumiller, J.; Reichert, M.U.

2006-01-01

During the last decade there has been a dramatic increase in the number of paradigms, standards and tools that can be used to realize process-oriented information systems. A major problem neglected in software engineering research so far has been the systematic determination of costs, benefits, and

Experience with case tools in the design of process-oriented software

Science.gov (United States)

Novakov, Ognian; Sicard, Claude-Henri

1994-12-01

In Accelerator systems such as the CERN PS complex, process equipment has a life time which may exceed the typical life cycle of its related software. Taking into account the variety of such equipment, it is important to keep the analysis and design of the software in a system-independent form. This paper discusses the experience gathered in using commercial CASE tools for analysis, design and reverse engineering of different process-oriented software modules, with a principal emphasis on maintaining the initial analysis in a standardized form. Such tools have been in existence for several years, but this paper shows that they are not fully adapted to our needs. In particular, the paper stresses the problems of integrating such a tool into an existing data-base-dependent development chain, the lack of real-time simulation tools and of Object-Oriented concepts in existing commercial packages. Finally, the paper gives a broader view of software engineering needs in our particular context.

Differential processing of social chemosignals obtained from potential partners in regards to gender and sexual orientation.

Science.gov (United States)

Lübke, Katrin T; Hoenen, Matthias; Pause, Bettina M

2012-03-17

On an individual level, human body odors carry information about whether a person is an eligible mate. The current studies investigate if body odors also transmit information about individuals being potential partners in more general terms, namely in regards to gender and sexual orientation. In study 1, 14 gay and 14 heterosexual men were presented with body odors obtained from potential partners (gay male and heterosexual female body odors, respectively) and heterosexual male body odor as a control. In study 2, 14 lesbian and 14 heterosexual women were presented with lesbian female and heterosexual male body odors representing body odors of potential partners, and heterosexual female body odor as a control. Central nervous processing was analyzed using chemosensory event-related potentials and current source density analysis (64-channel EEG recording). Gay and heterosexual men responded with shorter P2 latencies to the body odors of their preferred sexual partners, and lesbian women responded with shorter P2 latencies to body odors of their preferred gender. In response to heterosexual male body odors, lesbian women displayed the most pronounced P3 amplitude, and distinct neuronal activation in medial frontal and parietal neocortical areas. A similar pattern of neuronal activation was observed in gay men when presented with heterosexual male body odor. Both the early processing advantage (P2) for desirable partners' body odors as well as the enhanced evaluative processing (P3, CSD) of undesirable partners' body odors suggest that human body odors indeed carry information about individuals being potential partners in terms of gender and sexual orientation. Copyright © 2011 Elsevier B.V. All rights reserved.

Hospital marketing orientation and managed care processes: are they coordinated?

Science.gov (United States)

White, K R; Thompson, J M; Patel, U B

2001-01-01

The hospital marketing function has been widely adopted as a way to learn about markets, attract sufficient resources, develop appropriate services, and communicate the availability of such goods to those who may be able to purchase such services. The structure, tasks, and effectiveness of the marketing function have been the subject of increased inquiry by researchers and practitioners alike. A specific understanding of hospital marketing in a growing managed care environment and the relationship between marketing and managed care processes in hospitals is a growing concern. Using Kotler and Clarke's framework for assessing marketing orientation, we examined the marketing orientation of hospitals in a single state at two points in time--1993 and 1999. Study findings show that the overall marketing orientation score decreased from 1993 to 1999 for the respondent hospitals. The five elements of the Kotler and Clarke definition of marketing orientation remained relatively stable, with slightly lower scores related to customer philosophy. In addition, we evaluated the degree to which selected managed care activities are carried out as part of its marketing function. A significant (p marketing function was evident from 1993 to 1999. With increasing numbers of managed care plan enrollees, hospitals are likely focusing on organizational buyers as important customers. In order to appeal to organizational buyers, hospital executives may be focusing more on clinical quality and cost efficiency in the production of services, which will improve a hospital's position with organizational buyers.

Employee Orientation: A Process, Not a Program.

Science.gov (United States)

Zemke, Ron

1989-01-01

No or poor orientation can reduce new employees' effectiveness and contribute to dissatisfaction and turnover, costing the company money. The orientation programs of large companies such as Disney, Texas Instruments, and Corning Glass are successful due to high expectations, supervisor and senior management involvement, anxiety reduction, and…

Management of Multi-projects In a Process oriented Organization

OpenAIRE

Macheridis, Nikos; Nilsson, Carl-Henrik

2006-01-01

When projects are used as an organisational platform to conduct business, a project can be the only project in the organisation or one amongst several others. The latter case is called multi-project organisation. Usually an organization with a multi-project environment has a base organisation, which can be functional, matrix structure or another. The purpose of this article is to develop a model based on a process oriented organization as a complement to functional or matrix organizational st...

Crystallographic orientation analysis in HDDR process of anisotropic Nd-Fe-B magnet powders

Energy Technology Data Exchange (ETDEWEB)

Takizawa, Rina, E-mail: 3ES15002M@s.kyushu-u.ac.jp [Department of Applied Science for Electronics and Materials, Interdisciplinary Graduate School of Science and Engineering, Kyushu University, 6-1 Kasugakoen, Kasuga 816-8580 (Japan); Itakura, Masaru [Department of Applied Science for Electronics and Materials, Faculty of Engineering Sciences, Kyushu University, 6-1 Kasugakoen, Kasuga, Fukuoka 816-8580 (Japan); Katayama, Nobuhiro; Morimoto, Koichiro [R& D Division, Toda Kogyo Corp., 1-4 Meijishinkai, Otake, Hiroshima 739-0652 (Japan)

2017-07-01

Highlights: • Over 70% of the Nd{sub 2}Fe{sub 14}B grains after the HDDR process are aligned within 30°. • The c-axis alignment of Nd{sub 2}Fe{sub 14}B slightly deteriorates by the Nd-rich phase formation. • α-Fe grains possess a uniaxial and 〈1 1 3〉 oriented texture in the decomposed stage. • α-Fe is most likely to induce the texture development of recombined Nd{sub 2}Fe{sub 14}B. - Abstract: Microstructural changes and crystallographic orientation information in the hydrogenation-decomposition-desorption-recombination (HDDR) process of Nd-Fe-B alloy were investigated using electron backscatter diffraction (EBSD) and precession electron diffraction (PED) in order to understand the mechanism of anisotropy inducement in the HDDR process. Recombined Nd{sub 2}Fe{sub 14}B grains were found to nucleate at the interfaces between NdH{sub 2} and α-Fe grains and to have a [0 0 1]-oriented texture from the beginning of the recombination reaction. The Fe grains form with alignment of one of the 〈1 1 3〉 directions at decomposed stage. This suggests that α-Fe most likely induces texture development of recombined Nd{sub 2}Fe{sub 14}B.

Cognitive processing of orientation discrimination in anisometropic amblyopia.

Directory of Open Access Journals (Sweden)

Jianglan Wang

Full Text Available Cognition is very important in our daily life. However, amblyopia has abnormal visual cognition. Physiological changes of the brain during processes of cognition could be reflected with ERPs. So the purpose of this study was to investigate the speed and the capacity of resource allocation in visual cognitive processing in orientation discrimination task during monocular and binocular viewing conditions of amblyopia and normal control as well as the corresponding eyes of the two groups with ERPs. We also sought to investigate whether the speed and the capacity of resource allocation in visual cognitive processing vary with target stimuli at different spatial frequencies (3, 6 and 9 cpd in amblyopia and normal control as well as between the corresponding eyes of the two groups. Fifteen mild to moderate anisometropic amblyopes and ten normal controls were recruited. Three-stimulus oddball paradigms of three different spatial frequency orientation discrimination tasks were used in monocular and binocular conditions in amblyopes and normal controls to elicit event-related potentials (ERPs. Accuracy (ACC, reaction time (RT, the latency of novelty P300 and P3b, and the amplitude of novelty P300 and P3b were measured. Results showed that RT was longer in the amblyopic eye than in both eyes of amblyopia and non-dominant eye in control. Novelty P300 amplitude was largest in the amblyopic eye, followed by the fellow eye, and smallest in both eyes of amblyopia. Novelty P300 amplitude was larger in the amblyopic eye than non-dominant eye and was larger in fellow eye than dominant eye. P3b latency was longer in the amblyopic eye than in the fellow eye, both eyes of amblyopia and non-dominant eye of control. P3b latency was not associated with RT in amblyopia. Neural responses of the amblyopic eye are abnormal at the middle and late stages of cognitive processing, indicating that the amblyopic eye needs to spend more time or integrate more resources to process

Study of proton polarization in charge exchange process on optically oriented sodium atoms

International Nuclear Information System (INIS)

Zelenskij, A.N.; Kokhanovskij, S.A.

1984-01-01

Using high-power adjustable dye lasers for electron spin orientation in a charge-exchange target enables to significantly increase the proton polarization efficiency. A device is described that permits to avoid growth of the polarized proton beam emittance in a charge-exchange process in a strong magnetic field. The devise main feature is the use of an intensive source of neutral hydrogen atoms and the presence of a helium additional charge-exchange target which actualy is a proton ''source''. The helium charge-exchange cell is placed in the same magnetic field of a solenoid where a cell with oriented sodium is placed, a polarized electron being captured by a proton in the latter cell. In this case the beam at the solenoid inlet and outlet is in a neutral state; emittance growth related to the effect of end magnetic fields is not observed. The device after all prouduces polarized protons, their polarization degree is measured and the effect of various factors on polarization degree is studied. The description of the laser source and laser system is given. Measurement results have shown the beam intensity of neutral 7 keV atoms which passed through a polarizer to be 2 mA. The proton current doesn't depend. On the beeld fin the region of chrge exchange for the 8 kGs magnetic field. The degree of sodium polarization was 80% and polarized proton current approximately 70 μA at a temperature of the polarized sodium cell corresponding to the density of sodium vapar approximately 3x10 13 at/cm 2

Possibilities of the Integration of the Method of the Ecologically Oriented Independent Scientific Research in the Study Process

Science.gov (United States)

Grizans, Jurijs; Vanags, Janis

2010-01-01

The aim of this paper is to analyse possibilities of the integration of the method of the ecologically oriented independent scientific research in the study process. In order to achieve the set aim, the following scientific research methods were used: analysis of the conceptual guidelines for the development of environmentally oriented entrepreneurship, interpretation of the experts' evaluation of the ecologically oriented management, analysis of the results of the students' ecologically oriented independent scientific research, as well as monographic and logically constructive methods. The results of the study give an opportunity to make conclusions and to develop conceptual recommendations on how to introduce future economics and business professionals with the theoretical and practical aspects of ecologically oriented management during the study process.

BPMN4SOA : A service oriented process modelling language

OpenAIRE

Bergstøl, Eivind

2010-01-01

Service oriented architectures have become very popular the last few years. The abstraction of computer systems into a service paradigm bring many new solutions, both for cross business processes to aid interoperability and the reuse of existing legacy systems in a new network centric world. In the wake of this, service modelling has become a part of OMGs Model Driven Architecture and new modelling languages that are based on past experience for the new paradigm are emerging. BPMN 2.0 and...

Postural orientation and equilibrium processes associated with increased postural sway in autism spectrum disorder (ASD).

Science.gov (United States)

Wang, Zheng; Hallac, Rami R; Conroy, Kaitlin C; White, Stormi P; Kane, Alex A; Collinsworth, Amy L; Sweeney, John A; Mosconi, Matthew W

2016-01-01

Increased postural sway has been repeatedly documented in children with autism spectrum disorder (ASD). Characterizing the control processes underlying this deficit, including postural orientation and equilibrium, may provide key insights into neurophysiological mechanisms associated with ASD. Postural orientation refers to children's ability to actively align their trunk and head with respect to their base of support, while postural equilibrium is an active process whereby children coordinate ankle dorsi-/plantar-flexion and hip abduction/adduction movements to stabilize their upper body. Dynamic engagement of each of these control processes is important for maintaining postural stability, though neither postural orientation nor equilibrium has been studied in ASD. Twenty-two children with ASD and 21 age and performance IQ-matched typically developing (TD) controls completed three standing tests. During static stance, participants were instructed to stand as still as possible. During dynamic stances, participants swayed at a comfortable speed and magnitude in either anterior-posterior (AP) or mediolateral (ML) directions. The center of pressure (COP) standard deviation and trajectory length were examined to determine if children with ASD showed increased postural sway. Postural orientation was assessed using a novel virtual time-to-contact (VTC) approach that characterized spatiotemporal dimensions of children's postural sway (i.e., body alignment) relative to their postural limitation boundary, defined as the maximum extent to which each child could sway in each direction. Postural equilibrium was quantified by evaluating the amount of shared or mutual information of COP time series measured along the AP and ML directions. Consistent with prior studies, children with ASD showed increased postural sway during both static and dynamic stances relative to TD children. In regard to postural orientation processes, children with ASD demonstrated reduced spatial

Influence of deformation process on the improvement of non-oriented electrical steel

International Nuclear Information System (INIS)

Fischer, O.; Schneider, J.

2003-01-01

World-wide there is a trend to develop higher permeability grades of non-oriented electrical steels. The paper discusses the practical relevance of these developments and describes the progress in higher permeability materials utilizing optimized hot rolling and cold rolling processes

Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach

NARCIS (Netherlands)

Miao, Yongwu; Sloep, Peter; Koper, Rob

2009-01-01

Miao, Y., Sloep, P. B., & Koper, R. (2009). Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach. Presented at the 'Open workshop of TENCompetence - Rethinking Learning and Employment at a Time of Economic Uncertainty-event'. November, 19, 2009,

Pre-Proceedings of the 1st International Workshop on Process-oriented Information Systems in Healthcare (ProHealth'07)

NARCIS (Netherlands)

Reichert, M.U.; Peleg, M.; Lenz, R.

These pre-proceedings contain the presentations given at the 1st Int'l Workshop on Process-oriented Information Systems in Healthcare (ProHealth'07). Formal proceedings will be published in Springer's LNCS series. Process-oriented information systems have been demanded for more than 20 years and

Interaction between Task Oriented and Affective Information Processing in Cognitive Robotics

Science.gov (United States)

Haazebroek, Pascal; van Dantzig, Saskia; Hommel, Bernhard

There is an increasing interest in endowing robots with emotions. Robot control however is still often very task oriented. We present a cognitive architecture that allows the combination of and interaction between task representations and affective information processing. Our model is validated by comparing simulation results with empirical data from experimental psychology.

Efficacy of an ICALL Tutoring System and Process-Oriented Corrective Feedback

Science.gov (United States)

Choi, Inn-Chull

2016-01-01

A Web-based form-focused intelligent computer-assisted language learning (ICALL) tutoring system equipped with a process-oriented corrective feedback function was developed to investigate the extent to which such a program may serve as a viable method of teaching grammar to Korean secondary and elementary students. The present study was also…

Residual effects of ecstasy (3,4-methylenedioxymethamphetamine) on low level visual processes.

Science.gov (United States)

Murray, Elizabeth; Bruno, Raimondo; Brown, John

2012-03-01

'Ecstasy' (3,4-methylenedioxymethamphetamine) induces impaired functioning in the serotonergic system, including the occipital lobe. This study employed the 'tilt aftereffect' paradigm to operationalise the function of orientation-selective neurons among ecstasy consumers and controls as a means of investigating the role of reduced serotonin on visual orientation processing. The magnitude of the tilt aftereffect reflects the extent of lateral inhibition between orientation-selective neurons and is elicited to both 'real' contours, processed in visual cortex area V1, and illusory contours, processed in V2. The magnitude of tilt aftereffect to both contour types was examined among 19 ecstasy users (6 ecstasy only; 13 ecstasy-plus-cannabis users) and 23 matched controls (9 cannabis-only users; 14 drug-naive). Ecstasy users had a significantly greater tilt magnitude than non-users for real contours (Hedge's g = 0.63) but not for illusory contours (g = 0.20). These findings provide support for literature suggesting that residual effects of ecstasy (and reduced serotonin) impairs lateral inhibition between orientation-selective neurons in V1, which however suggests that ecstasy may not substantially affect this process in V2. Multiple studies have now demonstrated ecstasy-related deficits on basic visual functions, including orientation and motion processing. Such low-level effects may contribute to the impact of ecstasy use on neuropsychological tests of visuospatial function. Copyright © 2012 John Wiley & Sons, Ltd.

Molecular Orientation of Conjugated Polymer Chains in Nanostructures and Thin Films: Review of Processes and Application to Optoelectronics

Directory of Open Access Journals (Sweden)

Varun Vohra

2017-01-01

Full Text Available Semiconducting polymers are composed of elongated conjugated polymer backbones and side chains with high solubility and mechanical properties. The combination of these two features results in a high processability and a potential to orient the conjugated backbones in thin films and nanofibers. The thin films and nanofibers are usually composed of highly crystalline (high charge transport and amorphous parts. Orientation of conjugated polymer can result in enhanced charge transport or optical properties as it induces increased crystallinity or preferential orientation of the crystallites. After summarizing the potential strategies to exploit molecular order in conjugated polymer based optoelectronic devices, we will review some of the fabrication processes to induce molecular orientation. In particular, we will review the cases involving molecular and interfacial interactions, unidirectional deposition processes, electrospinning, and postdeposition mechanical treatments. The studies presented here clearly demonstrate that process-controlled molecular orientation of the conjugated polymer chains can result in high device performances (mobilities over 40 cm2·V−1·s−1 and solar cells with efficiencies over 10%. Furthermore, the peculiar interactions between molecularly oriented polymers and polarized light have the potential not only to generate low-cost and low energy consumption polarized light sources but also to fabricate innovative devices such as solar cell integrated LCDs or bipolarized LEDs.

A theory-informed, process-oriented Resident Scholarship Program.

Science.gov (United States)

Thammasitboon, Satid; Darby, John B; Hair, Amy B; Rose, Karen M; Ward, Mark A; Turner, Teri L; Balmer, Dorene F

2016-01-01

The Accreditation Council for Graduate Medical Education requires residency programs to provide curricula for residents to engage in scholarly activities but does not specify particular guidelines for instruction. We propose a Resident Scholarship Program that is framed by the self-determination theory (SDT) and emphasize the process of scholarly activity versus a scholarly product. The authors report on their longitudinal Resident Scholarship Program, which aimed to support psychological needs central to SDT: autonomy, competence, and relatedness. By addressing those needs in program aims and program components, the program may foster residents' intrinsic motivation to learn and to engage in scholarly activity. To this end, residents' engagement in scholarly processes, and changes in perceived autonomy, competence, and relatedness were assessed. Residents engaged in a range of scholarly projects and expressed positive regard for the program. Compared to before residency, residents felt more confident in the process of scholarly activity, as determined by changes in increased perceived autonomy, competence, and relatedness. Scholarly products were accomplished in return for a focus on scholarly process. Based on our experience, and in line with the SDT, supporting residents' autonomy, competence, and relatedness through a process-oriented scholarship program may foster the curiosity, inquisitiveness, and internal motivation to learn that drives scholarly activity and ultimately the production of scholarly products.

Predicting plot soil loss by empirical and process-oriented approaches: A review

Science.gov (United States)

Soil erosion directly affects the quality of the soil, its agricultural productivity and its biological diversity. Many mathematical models have been developed to estimate plot soil erosion at different temporal scales. At present, empirical soil loss equations and process-oriented models are consid...

Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach

NARCIS (Netherlands)

Miao, Yongwu; Sloep, Peter; Koper, Rob

2009-01-01

Miao, Y., Sloep, P. B., & Koper, R. (2010). Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach. In D. Griffiths & R. Koper (Eds.), Rethinking Learning and Employment at a Time of Economic Uncertainty. Proceedings of the 6th TENCompetence Open

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands.

Science.gov (United States)

Hagemann, Vera; Kluge, Annette

2017-01-01

Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes), the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high ( n = 58) or low ( n = 58) collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes such as

Entrepreneurial Orientation and Business Internationalisation Process: The Theoretical Foundations of International Entrepreneurship

Directory of Open Access Journals (Sweden)

Krzysztof Wach

2015-06-01

Full Text Available The main goal of the article is to discuss and elaborate on the basics of international entrepreneurial orientation (IEO, its fundamentals and principles. The paper reviews these three important terms by trying to link them and suggests a holistic framework. The article is of descriptive character, thus it is based on literature review and its constructive critics. The article is an attempted synthesis of the concept of international entrepreneurial orientation. It focuses on IEO as the implementation of one of the most important research theme in the theory of entrepreneurship, which is entrepreneurial orientation (EO into the studies of international entrepreneurship (IE. Findings: Firstly, international entrepreneurial process was discussed from the international entrepreneurship perspective. Secondly, the paper introduces the conceptualisation of entrepreneurial orientation from both three- and multidimensional perspectives. Thirdly, IEO is conceptualised and operationalised from the perspective of entrepreneurial internationalisation of firms. Implications & Recommendations: IEO is a multi-dimensional concept. IEO can be considered both an individual and firm-level construct. IEO enables business to identify and exploit internationalisation opportunities. IEO reflects the firms overall proactiveness and aggressiveness in its pursuit of international markets.

New guideline represents 'processed-oriented' approach for ISO 9000.

Science.gov (United States)

2001-02-01

Hospitals that have been tracking the development of ISO 9000 in the health care industry should pay close attention to a new guideline about to emerge. According to Laura Preole, health care services manager of SGS International Certification Services based in Rutherford, NJ, the new guideline is the latest step in an effort to establish a more 'process-oriented' method of looking at the health care environment from the moment a patient walks into a facility to the moment he or she is discharged.

Risk Factors in ERP Implementation Projects for Process Oriented

Directory of Open Access Journals (Sweden)

Andrzej Partyka

2009-09-01

Full Text Available This paper present review and analysis of risk factors, which could affect successful implementation of ERP system, for project performed in project oriented organizations. Presented risk breakdown structure and the list of common risk factors, are well-suited for ERP implementation projects. Considered risk categories allow for complex risk analysis. Additionally, mapping of risk importance for particular implementation phases is presented. Making presented model an important input for project risk management process, especially for the beginning phases which require identification of risk factors.

Process-oriented performance indicators for measuring ecodesign management practices

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

In order to support ecodesign performance measurement from a business perspective, this paper performs an exploration of available process-oriented indicators to be applied to ecodesign management practices. With the Ecodesign Maturity Model as a background framework, a systematic literature review...... coupled with a cross-content analysis was carried out to assign proper indicators to the practices. Results show that the currently available indicators do not fully reflect the characteristics of ecodesign and there is significant room for improving the development of tailor-made indicators....

ENDF/B-V processing programs

International Nuclear Information System (INIS)

DayDay, N.

1980-07-01

A description and operating instructions are supplied for the following ENDF/B-V Processing Programs: CHECKER, CRECT, STNDRD, FIZCON, PSYCHE, RESEND, INTER, INTEND, SUMRIZ, PLOTEF, LSTFCV, RIGEL. These programs can be obtained on magnetic tape, free of charge, from the IAEA Nuclear Data Section. (author)

Sexual Orientation (For Parents)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Sexual Orientation KidsHealth / For Parents / Sexual Orientation What's in this ... orientation is part of that process. What Is Sexual Orientation? The term sexual orientation refers to the gender ( ...

Polarization effects for pair creation by photon in oriented crystals at high energy

International Nuclear Information System (INIS)

Baier, V.N.; Katkov, V.M.

2006-01-01

Pair creation by a photon in an oriented crystal is considered in the frame of the quasiclassical operator method, which includes processes with polarized particles. Under some quite generic assumptions the general expression is derived for the probability of pair creation of longitudinally polarized electron (positron) by circularly polarized photon in oriented crystal. In the particular cases θ > V /m (θ is the angle of incidence, angle between the momentum of the initial photon and axis (plane) of crystal, V is the scale of a potential of axis or a plane relative to which the angle θ is defined) one has the constant field approximation and the coherent pair production theory correspondingly. Side by side with coherent process the probability of incoherent pair creation is calculated, which differs essentially from amorphous one. At high energy the pair creation in oriented crystal is strongly enhanced comparing with the amorphous medium. In the corresponding appendixes the integral polarization of positron is found in an external field and for the coherent and incoherent mechanisms

Market-oriented new product development: How can a means-end chain approach affect the process?

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted

2005-01-01

. The resukts also indicate that MEC data are most valuable to the team in the early stages of the development process and that lack of a learning orientation may inhibit the effects of a MEC approach. Originality/value - The MEC approach shows clear advantages for market oriented product development.......Purpose - Aims to ascertain whether a well-known theory within consumer research - a means-end chain (MEC) - can be used as a catalyst to achieve market oriented product development. Design/methodology/approach - Describes a case study, involving a Danish food manufacturer, where a MEC approach...... was introduced to a cross-functional development team at two different stages of the development process. Findings - Results show that MEC data is perceived as a good way of gaining knowledge about consumers; that the information serves well as the basis of discussions and for keeping project goals fixed...

An fMRI-study of locally oriented perception in autism: altered early visual processing of the block design test.

Science.gov (United States)

Bölte, S; Hubl, D; Dierks, T; Holtmann, M; Poustka, F

2008-01-01

Autism has been associated with enhanced local processing on visual tasks. Originally, this was based on findings that individuals with autism exhibited peak performance on the block design test (BDT) from the Wechsler Intelligence Scales. In autism, the neurofunctional correlates of local bias on this test have not yet been established, although there is evidence of alterations in the early visual cortex. Functional MRI was used to analyze hemodynamic responses in the striate and extrastriate visual cortex during BDT performance and a color counting control task in subjects with autism compared to healthy controls. In autism, BDT processing was accompanied by low blood oxygenation level-dependent signal changes in the right ventral quadrant of V2. Findings indicate that, in autism, locally oriented processing of the BDT is associated with altered responses of angle and grating-selective neurons, that contribute to shape representation, figure-ground, and gestalt organization. The findings favor a low-level explanation of BDT performance in autism.

Social workers’ orientation toward the evidence-based practice process : A Dutch survey

NARCIS (Netherlands)

van der Zwet, R.J.M.; Beneken Genaamd Kolmer, D.M.; Schalk, R.

2016-01-01

Objectives: This study assesses social workers’ orientation toward the evidence-based practice (EBP) process and explores which specific variables (e.g. age) are associated. Methods: Data were collected from 341 Dutch social workers through an online survey which included a Dutch translation of the

Orientation selection process during the early stage of cubic dendrite growth: A phase-field crystal study

International Nuclear Information System (INIS)

Tang Sai; Wang Zhijun; Guo Yaolin; Wang Jincheng; Yu Yanmei; Zhou Yaohe

2012-01-01

Using the phase-field crystal model, we investigate the orientation selection of the cubic dendrite growth at the atomic scale. Our simulation results reproduce how a face-centered cubic (fcc) octahedral nucleus and a body-centered cubic (bcc) truncated-rhombic dodecahedral nucleus choose the preferred growth direction and then evolve into the dendrite pattern. The interface energy anisotropy inherent in the fcc crystal structure leads to the fastest growth velocity in the 〈1 0 0〉 directions. New { 1 1 1} atomic layers prefer to nucleate at positions near the tips of the fcc octahedron, which leads to the directed growth of the fcc dendrite tips in the 〈1 0 0〉 directions. A similar orientation selection process is also found during the early stage of bcc dendrite growth. The orientation selection regime obtained by phase-field crystal simulation is helpful for understanding the orientation selection processes of real dendrite growth.

ABOUT THE GENERAL CONCEPT OF THE UNIVERSAL STORAGE SYSTEM AND PRACTICE-ORIENTED DATA PROCESSING

Directory of Open Access Journals (Sweden)

L. V. Rudikova

2017-01-01

Full Text Available Approaches evolution and concept of data accumulation in warehouse and subsequent Data Mining use is perspective due to the fact that, Belarusian segment of the same IT-developments is organizing. The article describes the general concept for creation a system of storage and practice-oriented data analysis, based on the data warehousing technology. The main aspect in universal system design on storage layer and working with data is approach uses extended data warehouse, based on universal platform of stored data, which grants access to storage and subsequent data analysis different structure and subject domains have compound’s points (nodes and extended functional with data structure choice option for data storage and subsequent intrasystem integration. Describe the universal system general architecture of storage and analysis practice-oriented data, structural elements. Main components of universal system for storage and processing practice-oriented data are: online data sources, ETL-process, data warehouse, subsystem of analysis, users. An important place in the system is analytical processing of data, information search, document’s storage and providing a software interface for accessing the functionality of the system from the outside. An universal system based on describing concept will allow collection information of different subject domains, get analytical summaries, do data processing and apply appropriate Data Mining methods and algorithms.

Orientation selectivity of synaptic input to neurons in mouse and cat primary visual cortex.

Science.gov (United States)

Tan, Andrew Y Y; Brown, Brandon D; Scholl, Benjamin; Mohanty, Deepankar; Priebe, Nicholas J

2011-08-24

Primary visual cortex (V1) is the site at which orientation selectivity emerges in mammals: visual thalamus afferents to V1 respond equally to all stimulus orientations, whereas their target V1 neurons respond selectively to stimulus orientation. The emergence of orientation selectivity in V1 has long served as a model for investigating cortical computation. Recent evidence for orientation selectivity in mouse V1 opens cortical computation to dissection by genetic and imaging tools, but also raises two essential questions: (1) How does orientation selectivity in mouse V1 neurons compare with that in previously described species? (2) What is the synaptic basis for orientation selectivity in mouse V1? A comparison of orientation selectivity in mouse and in cat, where such measures have traditionally been made, reveals that orientation selectivity in mouse V1 is weaker than in cat V1, but that spike threshold plays a similar role in narrowing selectivity between membrane potential and spike rate. To uncover the synaptic basis for orientation selectivity, we made whole-cell recordings in vivo from mouse V1 neurons, comparing neuronal input selectivity-based on membrane potential, synaptic excitation, and synaptic inhibition-to output selectivity based on spiking. We found that a neuron's excitatory and inhibitory inputs are selective for the same stimulus orientations as is its membrane potential response, and that inhibitory selectivity is not broader than excitatory selectivity. Inhibition has different dynamics than excitation, adapting more rapidly. In neurons with temporally modulated responses, the timing of excitation and inhibition was different in mice and cats.

DEJAVNIKI ZDRAVSTVENEGA TVEGANJA NA DELOVNEM MESTU PATRONAŽNE MEDICINSKE SESTRE

OpenAIRE

Vratarič, Marija Sabrina

2015-01-01

Patronažno varstvo zajema izredno pestro simptomatiko in problematiko. Potrebe po patronažni zdravstveni negi se po napovedih še povečujejo. Trendi sodobne družbe usmerjajo oskrbo posameznika tako, da ostane v domačem okolju čim dlje aktiven, zdrav in sposoben samooskrbe. Več vrst nasilja, promet in vremenske razmere, pravočasnost informacij ter neprimerno delovno okolje so dejavniki tveganja, ki smo jih v naši magistrski nalogi izpostavili in se v raziskavi tudi izkažejo za obremenjujoč...

Analiza izpustov dizelskih motorjev

OpenAIRE

MURN, GREGA

2016-01-01

V svojem diplomskem delu z naslovom »Analiza izpustov dizelskih motorjev«, sem bralcu skušal približati današnjo problematiko v zvezi z onesnaževanjem okolja, predvsem zaradi dizelskih izpuhov, ki jih prinaša industrija v vseh oblikah. Največji onesnaževalec okolja je absolutno promet, saj izpuhi avtomobilov vsebujejo obsežen skupek škodljivih snovi (ogljikovodiki HC, ogljikov monoksid CO, dušikovi oksidi NOx, žveplovi oksidi, trdni delci, itd.). Namen Evropskih in Ameriških standardov je ...

IV&V Project Assessment Process Validation

Science.gov (United States)

Driskell, Stephen

2012-01-01

The Space Launch System (SLS) will launch NASA's Multi-Purpose Crew Vehicle (MPCV). This launch vehicle will provide American launch capability for human exploration and travelling beyond Earth orbit. SLS is designed to be flexible for crew or cargo missions. The first test flight is scheduled for December 2017. The SLS SRR/SDR provided insight into the project development life cycle. NASA IV&V ran the standard Risk Based Assessment and Portfolio Based Risk Assessment to identify analysis tasking for the SLS program. This presentation examines the SLS System Requirements Review/System Definition Review (SRR/SDR), IV&V findings for IV&V process validation correlation to/from the selected IV&V tasking and capabilities. It also provides a reusable IEEE 1012 scorecard for programmatic completeness across the software development life cycle.

A theory-informed, process-oriented Resident Scholarship Program

Science.gov (United States)

Thammasitboon, Satid; Darby, John B.; Hair, Amy B.; Rose, Karen M.; Ward, Mark A.; Turner, Teri L.; Balmer, Dorene F.

2016-01-01

Background The Accreditation Council for Graduate Medical Education requires residency programs to provide curricula for residents to engage in scholarly activities but does not specify particular guidelines for instruction. We propose a Resident Scholarship Program that is framed by the self-determination theory (SDT) and emphasize the process of scholarly activity versus a scholarly product. Methods The authors report on their longitudinal Resident Scholarship Program, which aimed to support psychological needs central to SDT: autonomy, competence, and relatedness. By addressing those needs in program aims and program components, the program may foster residents’ intrinsic motivation to learn and to engage in scholarly activity. To this end, residents’ engagement in scholarly processes, and changes in perceived autonomy, competence, and relatedness were assessed. Results Residents engaged in a range of scholarly projects and expressed positive regard for the program. Compared to before residency, residents felt more confident in the process of scholarly activity, as determined by changes in increased perceived autonomy, competence, and relatedness. Scholarly products were accomplished in return for a focus on scholarly process. Conclusions Based on our experience, and in line with the SDT, supporting residents’ autonomy, competence, and relatedness through a process-oriented scholarship program may foster the curiosity, inquisitiveness, and internal motivation to learn that drives scholarly activity and ultimately the production of scholarly products. PMID:27306995

An object-oriented model for complex bills of materials in process industries

Directory of Open Access Journals (Sweden)

Vegetti M.

2002-01-01

Full Text Available In recent years, many process industries have been forced to drastically increase their product variety and adopt mass customization production strategies. Many of them have found that traditional bill of material (BOM processing systems do not sufficiently support the maintenance of the very large amounts of data (concerned with product structure demanded by these new production policies. Due to the use of BOM technology within the framework of integrated information systems, there is a demand for both (i a new representation of BOMs, able to deal efficiently with product variants and to handle decomposition-based production strategies, and (ii its corresponding BOM information processing system. This paper describes a conceptual representation that integrates elements of semantic relationships with object-oriented concepts to develop a data model for a hybrid bill of materials. The proposed semantic relationships include composed-of, decomposed-into, variant-of, restriction-of, and their corresponding reverse relationships. The conceptual model has been implemented using object-oriented data-based management system (OODBMS technology that allows creation of persistent Java objects. Preliminary tests show a remarkable reduction in the number of relationships when compared with former approaches.

Outer-shell excitation and capture processes: Alignment and orientation effects

International Nuclear Information System (INIS)

Andersen, N.; Dowek, D.; Dubois, A.; Hansen, J.P.; Nielsen, S.E.

1990-01-01

This contribution outlines some ongoing activities within a joint programme of experimental and theoretical studies of outer-shell excitation and charge transfer processes in atomic collisions. The main emphasis is presently on alignment and orientation phenomena. The aim is to reveal the shape and dynamics of the electronic charge cloud as it develops in time along the trajectory, and to understand these phenomena in terms of the underlying, basic mechanisms responsible for collisional excitation and transfer. (orig.)

Examining the impact of business process orientation on organizational performance: the case of Croatia

OpenAIRE

Ljubica Milanović Glavan; Vesna Bosilj Vukšić

2017-01-01

The competitive global market of the new millennium has raised awareness of business processes as the most important management paradigm. Extensive literature on business process management suggests that organizations can enhance their overall performance by adopting a process view of business. However, empirical research in this field is lacking. The aim of this paper is to examine the how business process orientation (BPO) impacts financially and non-financially organizational performance (...

Crystal orientation and sample preparation effects on sputtering and lattice damage in 100 keV self-irradiated copper

International Nuclear Information System (INIS)

Sprague, J.A.; Malmberg, P.R.; Reynolds, G.W.; Lambert, J.M.; Treado, P.A.; Vincenz, A.M.

1987-01-01

Sputtering yields and angular distributions have been measured as functions of sample preparation techniques and incident ion-beam orientation with respect to the crystal axes for 100 keV Cu-ion beams on Cu crystals and polycrystalline samples. The angular distributions have structure requiring an nth order cosine with two Gaussians superimposed to fit the data; strong peaking is observed near the backscatter direction. The yield is dependent on the beam to crystal and beam to polycrystalline-rod axis orientation, on the grain size of the polycrystals and on sample-preparation techniques. Yield measurements vary by as much as a factor of 4. Lattice-damage differences, measured with alpha particle channeling, are much smaller and seem to be saturated by fluences of the order of 1x10 16 /cm 2 . (orig.)

DESIGN FOCUSED ORIENTATION PROCESSES FOR MANAGING INVESTMENT COMPANIES IN THE FOREIGN EXCHANGE MARKET

Directory of Open Access Journals (Sweden)

Анатолий Аркадьевич АНАТОЛЬЕВ

2015-05-01

Full Text Available This report examines the investment companies operating in the market Forex. Business process analysis showed the design direction of their activities. Dedicated two groups of projects of investment companies can position them as project-oriented organization.

Actively Teaching Research Methods with a Process Oriented Guided Inquiry Learning Approach

Science.gov (United States)

Mullins, Mary H.

2017-01-01

Active learning approaches have shown to improve student learning outcomes and improve the experience of students in the classroom. This article compares a Process Oriented Guided Inquiry Learning style approach to a more traditional teaching method in an undergraduate research methods course. Moving from a more traditional learning environment to…

Effects of marital conflict on children: recent advances and emerging themes in process-oriented research.

Science.gov (United States)

Cummings, E Mark; Davies, Patrick T

2002-01-01

The effects of marital conflict on children's adjustment are well documented. For the past decade research has increasingly focused on advancing a process-level understanding of these effects, that is, accounting for the particular responses and patterns embedded within specific contexts, histories, and developmental periods that account for children's outcomes over time. As a vehicle for presenting an update, this review follows the framework for process-oriented research initially proposed by Cummings and Cummings (1988), concentrating on recent research developments, and also considering new and emerging themes in this area of research. In this regard, areas of advancement include (a) greater articulation of the effects of specific context/stimulus characteristics of marital conflict, (b) progress in identifying the psychological response processes in children (e.g., cognitive, emotional, social, physiological) that are affected and their possible role in accounting for relations between marital conflict and child outcomes, (c) greater understanding of the role of child characteristics, family history, and other contextual factors, including effects on children due to interrelations between marital conflict and parenting, and (d) advances in the conceptualization of children's outcomes, including that effects may be more productively viewed as dynamic processes of functioning rather than simply clinical diagnoses. Understanding of the impact of marital conflict on children as a function of time-related processes remains a gap in a process-oriented conceptualization of effects. Based on this review, a revised model for a process-oriented approach on the effects of marital discord on children is proposed and suggestions are made for future research directions.

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands

Science.gov (United States)

Hagemann, Vera; Kluge, Annette

2017-01-01

Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes), the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high (n = 58) or low (n = 58) collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes such as

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands

Directory of Open Access Journals (Sweden)

Vera Hagemann

2017-09-01

Full Text Available Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes, the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high (n = 58 or low (n = 58 collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes

Observation of changing crystal orientations during grain coarsening

International Nuclear Information System (INIS)

Sharma, Hemant; Huizenga, Richard M.; Bytchkov, Aleksei; Sietsma, Jilt; Offerman, S. Erik

2012-01-01

Understanding the underlying mechanisms of grain coarsening is important in controlling the properties of metals, which strongly depend on the microstructure that forms during the production process or during use at high temperature. Grain coarsening of austenite at 1273 K in a binary Fe–2 wt.% Mn alloy was studied using synchrotron radiation. Evolution of the volume, average crystallographic orientation and mosaicity of more than 2000 individual austenite grains was tracked during annealing. It was found that an approximately linear relationship exists between grain size and mosaicity, which means that orientation gradients are present in the grains. The orientation gradients remain constant during coarsening and consequently the character of grain boundaries changes during coarsening, affecting the coarsening rate. Furthermore, changes in the average orientation of grains during coarsening were observed. The changes could be understood by taking the observed orientation gradients and anisotropic movement of grain boundaries into account. Five basic modes of grain coarsening were deduced from the measurements, which include: anisotropic (I) and isotropic (II) growth (or shrinkage); movement of grain boundaries resulting in no change in volume but a change in shape (III); movement of grain boundaries resulting in no change in volume and mosaicity, but a change in crystallographic orientation (IV); no movement of grain boundaries (V).

Strong oriented chromatic number of planar graphs without short cycles

Directory of Open Access Journals (Sweden)

Mickaël Montassier

2008-01-01

Full Text Available Let M be an additive abelian group. A strong oriented coloringof an oriented graph G is a mapping φ from V(G to M such that (1 φ(u ≠ φ(v whenever uv is an arc in G and (2 φ(v - φ(u ≠ -(φ(t - φ(z whenever uv and zt are two arcs in G. We say that G has a M-strong-oriented coloring. The strong oriented chromatic number of an oriented graph, denoted by χ s (G, is the minimal order of a group M, such that G has M-strong-oriented coloring. This notion was introduced by Nešetřil and Raspaud. In this paper, we pose the following problem: Let i ≥ 4 be an integer. Let G be an oriented planar graph without cycles of lengths 4 to i. Which is the strong oriented chromatic number of G ? Our aim is to determine the impact of triangles on the strong oriented coloring. We give some hints of answers to this problem by proving that: (1 the strong oriented chromatic number of any oriented planar graph without cycles of lengths 4 to 12 is at most 7, and (2 the strong oriented chromatic number of any oriented planar graph without cycles of length 4 or 6 is at most 19.

A design for a V and V and UQ discovery process

International Nuclear Information System (INIS)

Knupp, Patrick Michael; Urbina, Angel

2011-01-01

There is currently sparse literature on how to implement systematic and comprehensive processes for modern V and V/UQ (VU) within large computational simulation projects. Important design requirements have been identified in order to construct a viable 'system' of processes. Significant processes that are needed include discovery, accumulation, and assessment. A preliminary design is presented for a VU Discovery process that accounts for an important subset of the requirements. The design uses a hierarchical approach to set context and a series of place-holders that identify the evidence and artifacts that need to be created in order to tell the VU story and to perform assessments. The hierarchy incorporates VU elements from a Predictive Capability Maturity Model and uses questionnaires to define critical issues in VU. The place-holders organize VU data within a central repository that serves as the official VU record of the project. A review process ensures that those who will contribute to the record have agreed to provide the evidence identified by the Discovery process. VU expertise is an essential part of this process and ensures that the roadmap provided by the Discovery process is adequate. Both the requirements and the design were developed to support the Nuclear Energy Advanced Modeling and Simulation Waste project, which is developing a set of advanced codes for simulating the performance of nuclear waste storage sites. The Waste project served as an example to keep the design of the VU Discovery process grounded in practicalities. However, the system is represented abstractly so that it can be applied to other M and S projects.

Unleashing the Effectiveness of Process-oriented Information Systems: Problem Analysis, Critical Success Factors, Implications

OpenAIRE

Mutschler, B.B.; Reichert, M.U.; Bumiller, J.

2008-01-01

Process-oriented information systems (IS) aim at the computerized support of business processes. So far, contemporary IS have often fail to meet this goal. To better understand this drawback, to systematically identify its rationales, and to derive critical success factors for business process support, we conducted three empirical studies: an exploratory case study in the automotive domain, an online survey among 79 IT professionals, and another online survey among 70 business process managem...

Learning Processes of Students in Pre-Vocational Secondary Education: Relations between Goal Orientations, Information Processing Strategies and Development of Conceptual Knowledge

Science.gov (United States)

Koopman, Maaike; Den Brok, Perry; Beijaard, Douwe; Teune, Peter

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information processing strategies were examined using questionnaires.…

Delayed discrimination of spatial frequency for gratings of different orientation: behavioral and fMRI evidence for low-level perceptual memory stores in early visual cortex.

Science.gov (United States)

Baumann, Oliver; Endestad, Tor; Magnussen, Svein; Greenlee, Mark W

2008-07-01

The concept of perceptual memory refers to the neural and cognitive processes underlying the storage of specific stimulus features such as spatial frequency, orientation, shape, contrast, and color. Psychophysical studies of perceptual memory indicate that observers can retain visual information about the spatial frequency of Gabor patterns independent of the orientation with which they are presented. Compared to discrimination of gratings with the same orientation, reaction times to orthogonally oriented gratings, however, increase suggesting additional processing. Using event-related fMRI we examined the pattern of neural activation evoked when subjects discriminated the spatial frequency of Gabors presented with the same or orthogonal orientation. Blood-oxygen level dependent BOLD fMRI revealed significantly elevated bilateral activity in visual areas (V1, V2) when the gratings to be compared had an orthogonal orientation, compared to when they had the same orientation. These findings suggest that a change in an irrelevant stimulus dimension requires additional processing in primary and secondary visual areas. The finding that the task-irrelevant stimulus property (orientation) had no significant effect on the prefrontal and intraparietal cortex supports a model of working memory in which discrimination and retention of basic stimulus dimensions is based on low-level perceptual memory stores that are located at an early stage in the visual process. Our findings suggest that accessing different stores requires time and has higher metabolic costs.

Improving the family orientation process in Cuban Special Schools trough Nearest Prototype classification

Directory of Open Access Journals (Sweden)

Caballero-Mota, Y.

2013-03-01

Full Text Available Cuban Schools for children with Affective – Behavioral Maladies (SABM have as goal to accomplish a major change in children behavior, to insert them effectively into society. One of the key elements in this objective is to give an adequate orientation to the children’s families; due to the family is one of the most important educational contexts in which the children will develop their personality. The family orientation process in SABM involves clustering and classification of mixed type data with non-symmetric similarity functions. To improve this process, this paper includes some novel characteristics in clustering and prototype selection. The proposed approach uses a hierarchical clustering based on compact sets, making it suitable for dealing with non-symmetric similarity functions, as well as with mixed and incomplete data. The proposal obtains very good results on the SABM data, and over repository databases.

Conceptualizing psychological processes in response to globalization: Components, antecedents, and consequences of global orientations.

Science.gov (United States)

Chen, Sylvia Xiaohua; Lam, Ben C P; Hui, Bryant P H; Ng, Jacky C K; Mak, Winnie W S; Guan, Yanjun; Buchtel, Emma E; Tang, Willie C S; Lau, Victor C Y

2016-02-01

The influences of globalization have permeated various aspects of life in contemporary society, from technical innovations, economic development, and lifestyles, to communication patterns. The present research proposed a construct termed global orientation to denote individual differences in the psychological processes of acculturating to the globalizing world. It encompasses multicultural acquisition as a proactive response and ethnic protection as a defensive response to globalization. Ten studies examined the applicability of global orientations among majority and minority groups, including immigrants and sojourners, in multicultural and relatively monocultural contexts, and across Eastern and Western cultures. Multicultural acquisition is positively correlated with both independent and interdependent self-construals, bilingual proficiency and usage, and dual cultural identifications. Multicultural acquisition is promotion-focused, while ethnic protection is prevention-focused and related to acculturative stress. Global orientations affect individuating and modest behavior over and above multicultural ideology, predict overlap with outgroups over and above political orientation, and predict psychological adaptation, sociocultural competence, tolerance, and attitudes toward ethnocultural groups over and above acculturation expectations/strategies. Global orientations also predict English and Chinese oral presentation performance in multilevel analyses and the frequency and pleasantness of intercultural contact in cross-lagged panel models. We discuss how the psychological study of global orientations contributes to theory and research on acculturation, cultural identity, and intergroup relations. (c) 2016 APA, all rights reserved).

Self-Orientation Modulates the Neural Correlates of Global and Local Processing.

Science.gov (United States)

Liddell, Belinda J; Das, Pritha; Battaglini, Eva; Malhi, Gin S; Felmingham, Kim L; Whitford, Thomas J; Bryant, Richard A

2015-01-01

Differences in self-orientation (or "self-construal") may affect how the visual environment is attended, but the neural and cultural mechanisms that drive this remain unclear. Behavioral studies have demonstrated that people from Western backgrounds with predominant individualistic values are perceptually biased towards local-level information; whereas people from non-Western backgrounds that support collectivist values are preferentially focused on contextual and global-level information. In this study, we compared two groups differing in predominant individualistic (N = 15) vs collectivistic (N = 15) self-orientation. Participants completed a global/local perceptual conflict task whilst undergoing functional Magnetic Resonance Imaging (fMRI) scanning. When participants high in individualistic values attended to the global level (ignoring the local level), greater activity was observed in the frontoparietal and cingulo-opercular networks that underpin attentional control, compared to the match (congruent) baseline. Participants high in collectivistic values activated similar attentional control networks o only when directly compared with global processing. This suggests that global interference was stronger than local interference in the conflict task in the collectivistic group. Both groups showed increased activity in dorsolateral prefrontal regions involved in resolving perceptual conflict during heightened distractor interference. The findings suggest that self-orientation may play an important role in driving attention networks to facilitate interaction with the visual environment.

Influence of fragment deformation and orientation on compact configuration of odd-Z superheavy nuclei

International Nuclear Information System (INIS)

Gurjit Kaur; Sandhu, Kirandeep; Sharma, Manoj K.

2016-01-01

The synthesis of heavy and superheavy nuclei is generally carried out by using hot and cold fusion reaction mechanisms. It has been noticed that, the cold fusion reactions occur at relatively low excitation energies (E*_C_N ∼ 10-20 MeV) whereas, the hot fusion reactions occur at excitation energies of E*_C_N ∼ 30- 50 MeV. The fusion mechanism is quite different in both the processes. In the cold fusion process, the interaction of spherical targets (Pb and Bi) with deformed light mass projectiles occurs. On the other hand, the fusion of deformed actinide targets with spherical "4"8Ca projectile characterize the hot interaction processes. Hence the deformations and orientations of targets and projectiles play extremely important role in the superheavy fusion process. The present analysis is carried out to aggrandize the work of which illustrate the role of deformations and orientations on even superheavy nuclei. Here, we extend this analysis for odd superheavy nuclei. It is relevant to note that the temperature and angular momentum effects are not included in the present analysis

Processing bimodal stimuli: Integrality/separability of colour and orientation

Directory of Open Access Journals (Sweden)

David eBimler

2013-10-01

Full Text Available We examined how two distinct stimulus features, orientation and colour, interact as contributions to global stimulus dissimilarity. Five subjects rated dissimilarity between pairs of bars (N = 30 varying in colour (four cardinal hues, plus white and orientation (six angles at 30° intervals. An exploratory analysis with individual-differences multidimensional scaling resulted in a 5D solution, with two dimensions required to accommodate the circular sequence of the angular attribute, and red-green, blue-yellow and achromatic axes for the colour attribute. Weights of the orientation subspace relative to the colour subspace varied among the subjects, from a 0.32:0.61 ratio to 0.53:0.44, emphasis shifting between colour and orientation. In addition to Euclidean metric, we modelled the interaction of colour and orientation using Minkowski power metrics across a range of Minkowski exponents p, including the city-block (p = 1, Euclidean (p = 2 and Dominance metric (p à ¥ as special cases. For averaged data, p ~ 1.3 provided the best fit, i.e. intermediate between separable and integral features. For individual subjects, however, the metric exponent varied significantly from p = 0.7 to p = 3.1, indicating a subject-specific rule for combining colour and orientation, as in Tversky and Gati’s variable-weights model. No relationship was apparent between dimensional weights and individual p exponents. Factors affecting dimensional integrality are discussed, including possible underlying neural mechanisms where the interaction of the low-level vision attributes orientation and colour might shift between uncorrelated (p =1 or correlated (p ³ 2 forms.

Process-oriented guided-inquiry learning: a natural fit for occupational therapy education.

Science.gov (United States)

Jaffe, Lynn; Gibson, Robert; D'Amico, Mariana

2015-04-01

After a brief review of the major group cooperative learning strategies, this article presents the format and use of Process-Oriented Guided-Inquiry Learning (POGIL) as a recommended teaching strategy for occupational therapy classes. This recommendation is based upon evidence of effectiveness of this strategy for enhancing critical thinking, content retention, and teamwork. Strategies for learning the process and suggestions for its use are based upon literature evidence and the authors' experiences with this strategy over 4 years in a class on evidence-based practice.

Recurrent V1-V2 interaction in early visual boundary processing.

Science.gov (United States)

Neumann, H; Sepp, W

1999-11-01

A majority of cortical areas are connected via feedforward and feedback fiber projections. In feedforward pathways we mainly observe stages of feature detection and integration. The computational role of the descending pathways at different stages of processing remains mainly unknown. Based on empirical findings we suggest that the top-down feedback pathways subserve a context-dependent gain control mechanism. We propose a new computational model for recurrent contour processing in which normalized activities of orientation selective contrast cells are fed forward to the next processing stage. There, the arrangement of input activation is matched against local patterns of contour shape. The resulting activities are subsequently fed back to the previous stage to locally enhance those initial measurements that are consistent with the top-down generated responses. In all, we suggest a computational theory for recurrent processing in the visual cortex in which the significance of local measurements is evaluated on the basis of a broader visual context that is represented in terms of contour code patterns. The model serves as a framework to link physiological with perceptual data gathered in psychophysical experiments. It handles a variety of perceptual phenomena, such as the local grouping of fragmented shape outline, texture surround and density effects, and the interpolation of illusory contours.

Object-oriented process dose modeling for glovebox operations

International Nuclear Information System (INIS)

Boerigter, S.T.; Fasel, J.H.; Kornreich, D.E.

1999-01-01

The Plutonium Facility at Los Alamos National Laboratory supports several defense and nondefense-related missions for the country by performing fabrication, surveillance, and research and development for materials and components that contain plutonium. Most operations occur in rooms with one or more arrays of gloveboxes connected to each other via trolley gloveboxes. Minimizing the effective dose equivalent (EDE) is a growing concern as a result of steadily declining allowable dose limits being imposed and a growing general awareness of safety in the workplace. In general, the authors discriminate three components of a worker's total EDE: the primary EDE, the secondary EDE, and background EDE. A particular background source of interest is the nuclear materials vault. The distinction between sources inside and outside of a particular room is arbitrary with the underlying assumption that building walls and floors provide significant shielding to justify including sources in other rooms in the background category. Los Alamos has developed the Process Modeling System (ProMoS) primarily for performing process analyses of nuclear operations. ProMoS is an object-oriented, discrete-event simulation package that has been used to analyze operations at Los Alamos and proposed facilities such as the new fabrication facilities for the Complex-21 effort. In the past, crude estimates of the process dose (the EDE received when a particular process occurred), room dose (the EDE received when a particular process occurred in a given room), and facility dose (the EDE received when a particular process occurred in the facility) were used to obtain an integrated EDE for a given process. Modifications to the ProMoS package were made to utilize secondary dose information to use dose modeling to enhance the process modeling efforts

Exploring Students' Reflective Thinking Practice, Deep Processing Strategies, Effort, and Achievement Goal Orientations

Science.gov (United States)

Phan, Huy Phuong

2009-01-01

Recent research indicates that study processing strategies, effort, reflective thinking practice, and achievement goals are important factors contributing to the prediction of students' academic success. Very few studies have combined these theoretical orientations within one conceptual model. This study tested a conceptual model that included, in…

Exploring MSW students’ and social workers’ orientation toward the evidence-based practice process

NARCIS (Netherlands)

Van Der Zwet, R.J.M.; Weling, J.; Beneken Genaamd Kolmer, D.M.; Schalk, R.

2017-01-01

The aim of this exploratory study was to assess whether practicing social workers currently enrolled in Master Social Work (MSW) programs (hereafter referred to as MSW students) were more oriented to the evidence-based practice (EBP) process and more engaged in it than practicing social workers who

Orientation dependence in collision induced electronic relaxation studied through van der Waals complexes with isomeric structures. Invited feature article

International Nuclear Information System (INIS)

Cheng, P.Y.; Lapierre, L.; Ju, S.S.; DeRose, P.; Dai, H.L.

1994-01-01

Weakly bound molecular complexes with more than one well-defined structures provide us with an unique opportunity to investigate dynamic processes induced by intermolecular interactions with specific orientations. The relative orientation of the two interacting molecules or atoms is defined by the complex structure. The effect of the orientation in the spin changing collisions glyoxal (S 1 ) + Ar → glyoxal (T 1 ) + Ar and acetylene (S 1 ) + Ar → acetylene (T) + Ar have been studied by measuring the intersystem crossing (ISC) rates of the glyoxal(S 1 ).Ar and acetylene(S 1 ).Ar complexes with different isomeric structures. Results show that there is a strong orientation dependence in the ISC of glyoxal(S 1 ) induced by interaction with the Ar atom: the Ar atom positioned in the molecular plane is much more effective than in the out-of-plane position in inducing the S 1 → T 1 transition of glyoxal. On the other hand, studies of acetylene(S 1 ).Ar complexes indicate that the Ar-induced ISC rates are nearly identical for the in-plane and out-of-plane positions. Orientation dependence in the collision induced vibrational relaxation process C 2 H 2 (S 1 , v i ) + Ar → C 2 H 2 (S 1 , v f i ) + Ar is also studied by measuring the vibrational predissociation rates of the acetylene(S 1 ).Ar complex isomers. The results indicate that collisions of C 2 H 2 (S 1 , v 3 = 3, 4) with Ar at two orthogonal orientations are equally effective in causing vibrational relaxation of C 2 H 2 . (orig.)

Learning processes of students pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

NARCIS (Netherlands)

Koopman, M.; Brok, den P.J.; Beijaard, D.; Teune, P.J.

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information

Emotional Processing, Interaction Process, and Outcome in Clarification-Oriented Psychotherapy for Personality Disorders: A Process-Outcome Analysis.

Science.gov (United States)

Kramer, Ueli; Pascual-Leone, Antonio; Rohde, Kristina B; Sachse, Rainer

2016-06-01

It is important to understand the change processes involved in psychotherapies for patients with personality disorders (PDs). One patient process that promises to be useful in relation to the outcome of psychotherapy is emotional processing. In the present process-outcome analysis, we examine this question by using a sequential model of emotional processing and by additionally taking into account a therapist's appropriate responsiveness to a patient's presentation in clarification-oriented psychotherapy (COP), a humanistic-experiential form of therapy. The present study involved 39 patients with a range of PDs undergoing COP. Session 25 was assessed as part of the working phase of each therapy by external raters in terms of emotional processing using the Classification of Affective-Meaning States (CAMS) and in terms of the overall quality of therapist-patient interaction using the Process-Content-Relationship Scale (BIBS). Treatment outcome was assessed pre- and post-therapy using the Global Severity Index (GSI) of the SCL-90-R and the BDI. Results indicate that the good outcome cases showed more self-compassion, more rejecting anger, and a higher quality of therapist-patient interaction compared to poorer outcome cases. For good outcome cases, emotional processing predicted 18% of symptom change at the end of treatment, which was not found for poor outcome cases. These results are discussed within the framework of an integrative understanding of emotional processing as an underlying mechanism of change in COP, and perhaps in other effective therapy approaches for PDs.

An X window based graphics user interface for radiation information processing system developed with object-oriented programming technology

International Nuclear Information System (INIS)

Gao Wenhuan; Fu Changqing; Kang Kejun

1993-01-01

X Window is a network-oriented and network transparent windowing system, and now dominant in the Unix domain. The object-oriented programming technology can be used to change the extensibility of a software system remarkably. An introduction to graphics user interface is given. And how to develop a graphics user interface for radiation information processing system with object-oriented programming technology, which is based on X Window and independent of application is described briefly

Students' goal orientations, information processing strategies and knowledge development in competence-based pre-vocational secondary education

NARCIS (Netherlands)

Koopman, M.

2010-01-01

In this study, learning processes of students in competence-based Pre-Vocational Secondary Education (PVSE; in Dutch vmbo) were investigated. The study aimed at describing the relation between goal orientations, information processing strategies and the development of knowledge of these students.

VIP : A Visual Editor and Compiler for v-Promela

OpenAIRE

Kamel, Moataz; Leue, Stefan

2001-01-01

We describe the Visual Interface to Promela (VIP) tool that we have recently implemented. VIP supports the visual editing and maintenance of v-Promela models. v-Promela is a visual, object-oriented extension to Promela, the input language to the Spin model checker. We introduce the v-Promela notation as supported by the VIP editor, discuss Promela code generation, and describe the process of property validation for the resulting models. Our discussion centers around two case studies, a call p...

Learning processes of students in competence-based pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

NARCIS (Netherlands)

Dr. M. Koopman; prof dr Douwe Beijaard; Dr P.J. Teune; P. den Brok

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n=719; 14 schools). Students' preferences for certain types of goals and information processing

Comparison of performance on process- and product-oriented assessments of fundamental motor skills across childhood.

Science.gov (United States)

Logan, Samuel W; Barnett, Lisa M; Goodway, Jacqueline D; Stodden, David F

2017-04-01

Process-oriented motor competence (MC) assessments evaluate how a movement is performed. Product-oriented assessments evaluate the outcome of a movement. Determining the concurrent validity of process and product assessments is important to address the predictive utility of motor competence for health. The current study aimed to: (1) compare process and product assessments of the standing long jump, hop and throw across age groups and (2) determine the capacity of process assessments to classify levels of MC. Participants included 170 children classified into three age groups: 4-5, 7-8 and 10-11 years old. Participants' skills were examined concurrently using three process assessments ((Test of Gross Motor Development-2nd edition [TGMD-2]), Get Skilled; Get Active, and developmental sequences) and one product measure (throw speed, jump and hop distance). Results indicate moderate to strong correlations between (1) process assessments across skills and age groups (r range = .37-70) and (2) process and product assessments across skills and age groups (r range = .26-.88). In general, sensitivity to detect advanced skill level is lowest for TGMD-2 and highest for developmental sequences for all three skills. The use of process and product assessments is suggested to comprehensively capture levels of MC in human movement.

Lecture-free biochemistry: A Process Oriented Guided Inquiry Approach.

Science.gov (United States)

Minderhout, Vicky; Loertscher, Jennifer

2007-05-01

Biochemistry courses at Seattle University have been taught exclusively using process oriented guided inquiry learning (POGIL) without any traditional lecture component since 1997. In these courses, students participate in a structured learning environment, which includes a preparatory assignment, an in-class activity, and a follow-up skill exercise. Instructor-designed learning activities provide the content of the course while the cooperative learning structure provides the content-free procedures that promote development of critical process skills needed for learning. This format enables students to initially explore a topic independently, work together in groups to construct and refine knowledge, and eventually develop deep understanding of the essential concepts. These stages of exploration and concept development form the foundation for application to high level biochemical problems. At the end of this course, most students report feeling confident in their knowledge of biochemistry and report substantial gains in independence, critical thinking, and respect for others. Copyright © 2007 International Union of Biochemistry and Molecular Biology, Inc.

Orientation of nuclei excited by polarized neutrons

International Nuclear Information System (INIS)

Lifshits, E.P.

1986-01-01

Polarization and radiation angular distribution of oriented nuclei in inelastic scattering of polarized neutrons were investigated. Nucleus orientation in the final state was described by polarization density matrix (PDM). If PDM is known, angular distributions, linear and circular polarization of γ-quanta emitted by a nucleus can be determined. Analytical expression for PDM, conditions of its diagonalization in the case of direct nucleus excitation and excitation by the stage of compound nucleus were obtained. Orientation of 12 C nuclei in the excited state 4.439 MeV, 2 + at energy of incident neutrons in the laboratory system from 4.8 MeV (excitation threshold) upt to 9 MeV was calculated as an example. Neutrons in initial state are completely polarized along Z axis. Calculations showed that excitation proceeds mainly by the stage of compound nucleus formation and 12 C nucleus is highly polarized in excited state

Wafik Raouf, L'Europe vue par l'Islam. Une perception ambivalente, L'Harmattan, coll. Histoire et Perspectives Méditerranéennes, Paris, 2000, 239 p.

Directory of Open Access Journals (Sweden)

Gilbert Meynier

2005-03-01

Full Text Available Un peu différemment de ce que promet le titre, cet ouvrage est une réflexion, ondoyante et diverse, sur les rapports entre civilisations : entre le monde musulman - en fait, surtout le Proche-Orient - et l'Occident - surtout européen. Il rend honnêtement compte de l'imaginaire, bien réel, du contentieux islam-chrétienté, des traumatismes des croi­sades, et du colonialisme. Sans cacher les obstacles et les préjugés, M. Raouf tente de se situer au-delà en composant un péan aux relations intercu...

Polarized proton target with horizontal spin orientation

International Nuclear Information System (INIS)

Bunyatova, Eh.I.; Kiselev, Yu.F.; Kozlenko, N.G.

1988-01-01

Proton target, the polarization vector of which may be arbitrary oriented in horizontal plane relatively to the beam, is developed and tested. 70% value of polarization is obtained. 0.6 K temperature is acquired through 3 He pumping out continuous cycle. 1.2-propylene glycol - Cr(V) was used as working medium. Magnetic system is made in the form of Helmholtz sperconducting coils with working curren close to critical one. Target polarization is measured by NMR technique using original system of proton signal processing

Exfoliation of GaAs caused by MeV 1H and 4He ion implantation at left angle 100 right angle , left angle 110 right angle axial and random orientations

International Nuclear Information System (INIS)

Rauhala, E.; Raeisaenen, J.

1994-01-01

The exfoliation procedure of the ion range determination of gaseous implants in single crystal GaAs is investigated. The correlation of the observed crater depth with the ion range is studied for random, left angle 100 right angle and left angle 110 right angle axial orientation high dose implantations of 1.5-2.5 MeV 1 H and 4 He ions. Depending on the experimental conditions, the crater depths corresponded to range values between the modal range and the range maximum. The observed crater depths could be related to the actual He concentration depth distributions by determining the profiles of the 4 He implants by 2.7 MeV proton backscattering. The implantation parameters affecting the exfoliation process, and especially the increase rate of the sample temperature, are investigated. The range distribution parameters for the 1.5 MeV 4 He implants are presented. ((orig.))

Strategic process strengthens and orientates the regional RandD capacity

Energy Technology Data Exchange (ETDEWEB)

Knuuttila, Kirsi [JAMK Univ. of Applied Sciences, Jyvaeskylae (Finland)], e-mail: kirsi.knuuttila@jamk.fi; Krissakova, Ingrid [National Forest Centre-Forest Research Inst., Zvolen (Slovakia); Barbena, Goizeder [Centro Nacional de Energias Renovables/ Departamento de Biomasa, CENER, Pamplona (Spain); Hryniewicz, Marek [Inst. of Technology and Life Sciences, ITP, Raszyn (Poland); Ketikidis, Chrysovalantis [Centre for Research and Technology Hellas, CERTH/ Inst. for Solid Fuels Technology and Applications, Thessaloniki (Greece); Wihersaari, Margareta [Jyvaeskylae Univ., Jyvaeskylae (Finland)

2012-11-01

The use of biomasses and competition for biomass resources are rapidly increasing in Europe due to the positive environmental advantages that this energy source entails, including climate change prevention. Central Finland, Navarra (Spain), Western Macedonia (Greece), Slovakia and Wielkopolska (Poland) have taken the joint initiative to strengthen the regional expertise, cooperation capacities and innovation environment in the field of sustainable use of biomass resources. The initiative to develop the regional research driven clusters is supported by BIOCLUS project (www.bioclus.eu) co-financed by FP7 Regions of Knowledge Programme. The biomass research orientated clusters have built up Regional Strategic RandD Agendas (SRA) and Joint Action Plans (JAP) based on the SRAs. The starting point for SRA is the comprehensive understanding of regional biomass resources. SRA and JAP process orientates and strengthens research activities and capacity building in the selected research fields related to sustainable use of biomass. The agenda supports expertise development and cooperation in the regional research-driven cluster. It identifies the focus of research activities in the future and supports the authorities in directing the use of human and financial resources.

Influence of information communicative technologies on students’ sport-oriented physical education interest

Directory of Open Access Journals (Sweden)

Oleg Olkhovy

2015-08-01

Full Text Available Purpose: determination the influence of information communicative technologies on students’ interest in regular exercise of sport-oriented physical education. Material and Methods: in the researches were involved 1–5 year basic department students of V. N Karazin Kharkov National University (n=36402. Methods: analysis of literature sources, formatted pedagogical experiment, sociological research, maths statistics. Results: through experimental research we found out that that usage of information communicative technologies in authors’ model of sport-oriented physical education in high schools had provided increase in amount of students, who engaged in chosen sports (moving activity, by 14,4% (1463 persons. Conclusion: the usage of information communicative technologies in educational process promoted increasing of student quantity in the sport-oriented groups

Quantitatively identical orientation-dependent ionization energy and electron affinity of diindenoperylene

Energy Technology Data Exchange (ETDEWEB)

Han, W. N.; Yonezawa, K.; Makino, R.; Kato, K.; Hinderhofer, A.; Ueno, N.; Kera, S. [Graduate School of Advanced Integration Science, Chiba University 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Murdey, R.; Shiraishi, R.; Yoshida, H.; Sato, N. [Institute for Chemical Research, Kyoto University, Uji, Kyoto 611-0011 (Japan)

2013-12-16

Molecular orientation dependences of the ionization energy (IE) and the electron affinity (EA) of diindenoperylene (DIP) films were studied by using ultraviolet photoemission spectroscopy and inverse photoemission spectroscopy. The molecular orientation was controlled by preparing the DIP films on graphite and SiO{sub 2} substrates. The threshold IE and EA of DIP thin films were determined to be 5.81 and 3.53 eV for the film of flat-lying DIP orientation, respectively, and 5.38 and 3.13 eV for the film of standing DIP orientation, respectively. The result indicates that the IE and EA for the flat-lying film are larger by 0.4 eV and the frontier orbital states shift away from the vacuum level compared to the standing film. This rigid energy shift is ascribed to a surface-electrostatic potential produced by the intramolecular polar bond (>C{sup −}-H{sup +}) for standing orientation and π-electron tailing to vacuum for flat-lying orientation.

a New Process-Oriented and Spatiotemporal Data Model for GIS Data

Science.gov (United States)

Shen, Y.

2018-04-01

With the rapid development of wireless sensor and information technology, there is a trend of transition from "digital monitoring" to "intelligence monitoring" advancing process. The traditional model cannot completely match the dynamic data to accurately describe changes of geographical and environmental changes. In this paper, we try to build a process-oriented and real-time spatiotemporal data model to meet the demands. With various types of monitoring devices, detection methods and the utilization of new technologies, the model can simulate the possible waterlog area in a specific year by analyzing the given data. By testing and modifying the spatiotemporal model, we can come to a rational conclusion that our model can forecast the actual situation in certain extent.

Enhancing Student Learning of Enterprise Integration and Business Process Orientation through an ERP Business Simulation Game

Science.gov (United States)

Seethamraju, Ravi

2011-01-01

The sophistication of the integrated world of work and increased recognition of business processes as critical corporate assets require graduates to develop "process orientation" and an "integrated view" of business. Responding to these dynamic changes in business organizations, business schools are also continuing to modify…

Motivation and performance within a collaborative computer-based modeling task: Relations between students' achievement goal orientation, self-efficacy, cognitive processing and achievement

OpenAIRE

Sins, P.H.M.; van Joolingen, W.R.; Savelsbergh, E.R.; van Hout-Wolters, B.H.A.M.

2008-01-01

Purpose of the present study was to test a conceptual model of relations among achievement goal orientation, self-efficacy, cognitive processing, and achievement of students working within a particular collaborative task context. The task involved a collaborative computer-based modeling task. In order to test the model, group measures of mastery-approach goal orientation, performance-avoidance goal orientation, self-efficacy, and achievement were employed. Students’ cognitive processing was a...

On the Correlation between Morphology of alpha and Its Crystallographic Orientation Relationship with TiB and Beta in Boron Containing Ti-5Al-5Mo-5V-3Cr-0.5Fe Alloy (Preprint)

Science.gov (United States)

2012-01-01

orientation microscopy studies on a boron containing version of the commercial Ti- 5Al-5Mo-5V-3Cr-0.5Fe ( Ti5553 ) alloy. 15. SUBJECT TERMS Ti5553 ...of the commercial Ti-5Al-5Mo-5V-3Cr-0.5Fe ( Ti5553 ) alloy. Keywords: Ti5553 , TiB, EBSD, crystallography, orientation relationship. Paper There has...absence of orientation relationships between the α, β and TiB phases, on the morphology of α nucleating from TiB in the Ti5553 alloy.. The base

La science, la littérature, le rituel: le vrai dire et le plus que mentir

Directory of Open Access Journals (Sweden)

Panagiotis Christias

2005-03-01

Full Text Available Le scientifique promet la vérité sans être en mesure d'accomplir sa promesse tandis que l'écrivain promet de mentir mais par son mensonge, il fait plus que mentir. Il ne dit certainement pas la vérité, car la vérité n'est pas sa préoccupation première. Voilà comment nous pouvons résumer les deux attitudes, condamnées à un antagonisme stérile par l'attitude positiviste moderne. Compte tenu donc de l'intention fondatrice de la science, de sa promesse donc originaire et fondatrice, la science doit dire la vérité et rien que la vérité. Ce qui, de l'aveu même de cette même science, est impossible. [...] La littérature se permet de reconstruire des mondes par-delà le vrai et le faux. [...] Un récit littéraire ne demande pas la consécration de la vérité, ne demande pas à être suivi parce que vrai, n'impose rien et n'attend rien. Sa vraie destinée est l'errance et sa vraie conscience est celle de sa dissémination. Celui qui renonce à la prétention de vérité renonce en même temps à la volonté de dominer. Dominer signifie créer un espace de vérité dans lequel celui qui énonce la vérité est le maître légitime de ceux qui sont dans le champ de la conception du monde dont cette vérité est la pierre angulaire.

Multicomponent domino processes based on the organocatalytic generation of conjugated acetylides: efficient synthetic manifolds for diversity-oriented molecular construction.

Science.gov (United States)

Tejedor, David; González-Cruz, David; Santos-Expósito, Alicia; Marrero-Tellado, Jose Juan; de Armas, Pedro; García-Tellado, Fernando

2005-06-06

The organocatalytic generation of a strong base by the action of a good nucleophile is the base for the in situ catalytic generation of conjugated acetylides in the presence of aldehydes or activated ketones. The method is affordable in a multicomponent, domino format able to generate a chemically diverse set of multifunctionalized adducts that are very well suited for diversity-oriented molecular construction. The domino process involves a nucleophile as catalyst and a terminal conjugated alkyne (H-C[triple chemical bond]C-Z) and an aldehyde or activated ketone as building blocks. The chemical outcome of this process changes dramatically as a function of the nucleophile (tertiary amine or phosphine), temperature, stoichiometry, and solvent. These multicomponent domino processes achieve molecular construction with good atom economy and, very importantly, with an exquisite chemo-differentiating incorporation of identical starting units into the products (nondegenerated chemical output). These properties convert the H-C[triple chemical bond]C-Z unit into a specific building block for diversity-oriented molecular construction. Applications to the modular and diversity-oriented synthesis of relevant heterocycles are discussed. A protocol involving two coupled domino processes linked in a one-pot manner will be discussed as an efficient synthetic manifold for the modular and diversity-oriented construction of multisubstituted nitrogen-containing heterocycles.

The primary visual cortex in the neural circuit for visual orienting

Science.gov (United States)

Zhaoping, Li

The primary visual cortex (V1) is traditionally viewed as remote from influencing brain's motor outputs. However, V1 provides the most abundant cortical inputs directly to the sensory layers of superior colliculus (SC), a midbrain structure to command visual orienting such as shifting gaze and turning heads. I will show physiological, anatomical, and behavioral data suggesting that V1 transforms visual input into a saliency map to guide a class of visual orienting that is reflexive or involuntary. In particular, V1 receives a retinotopic map of visual features, such as orientation, color, and motion direction of local visual inputs; local interactions between V1 neurons perform a local-to-global computation to arrive at a saliency map that highlights conspicuous visual locations by higher V1 responses. The conspicuous location are usually, but not always, where visual input statistics changes. The population V1 outputs to SC, which is also retinotopic, enables SC to locate, by lateral inhibition between SC neurons, the most salient location as the saccadic target. Experimental tests of this hypothesis will be shown. Variations of the neural circuit for visual orienting across animal species, with more or less V1 involvement, will be discussed. Supported by the Gatsby Charitable Foundation.

Lateral Spread of Orientation Selectivity in V1 is Controlled by Intracortical Cooperativity

Science.gov (United States)

Chavane, Frédéric; Sharon, Dahlia; Jancke, Dirk; Marre, Olivier; Frégnac, Yves; Grinvald, Amiram

2011-01-01

Neurons in the primary visual cortex receive subliminal information originating from the periphery of their receptive fields (RF) through a variety of cortical connections. In the cat primary visual cortex, long-range horizontal axons have been reported to preferentially bind to distant columns of similar orientation preferences, whereas feedback connections from higher visual areas provide a more diverse functional input. To understand the role of these lateral interactions, it is crucial to characterize their effective functional connectivity and tuning properties. However, the overall functional impact of cortical lateral connections, whatever their anatomical origin, is unknown since it has never been directly characterized. Using direct measurements of postsynaptic integration in cat areas 17 and 18, we performed multi-scale assessments of the functional impact of visually driven lateral networks. Voltage-sensitive dye imaging showed that local oriented stimuli evoke an orientation-selective activity that remains confined to the cortical feedforward imprint of the stimulus. Beyond a distance of one hypercolumn, the lateral spread of cortical activity gradually lost its orientation preference approximated as an exponential with a space constant of about 1 mm. Intracellular recordings showed that this loss of orientation selectivity arises from the diversity of converging synaptic input patterns originating from outside the classical RF. In contrast, when the stimulus size was increased, we observed orientation-selective spread of activation beyond the feedforward imprint. We conclude that stimulus-induced cooperativity enhances the long-range orientation-selective spread. PMID:21629708

Aging Potentiates Lateral but Not Local Inhibition of Orientation Processing in Primary Visual Cortex

Directory of Open Access Journals (Sweden)

Zhengchun Wang

2018-02-01

Full Text Available Aging-related declines in vision can decrease well-being of the elderly. Concerning early sensory changes as in the primary visual cortex, physiological and behavioral reports seem contradictory. Neurophysiological studies on orientation tuning properties suggested that neuronal changes might come from decreased cortical local inhibition. However, behavioral results either showed no clear deficits in orientation processing in older adults, or proposed stronger surround suppression. Through psychophysical experiments and computational modeling, we resolved these discrepancies by suggesting that lateral inhibition increased in older adults while neuronal orientation tuning widths, related to local inhibition, stayed globally intact across age. We confirmed this later result by re-analyzing published neurophysiological data, which showed no systematic tuning width changes, but instead displayed a higher neuronal noise with aging. These results suggest a stronger lateral inhibition and mixed effects on local inhibition during aging, revealing a more complex picture of age-related effects in the central visual system than people previously thought.

Integration of process-oriented control with systematic inspection in FRAMATOME-FBFC fuel manufacturing

International Nuclear Information System (INIS)

Kopff, G.

2000-01-01

The classical approach to quality control is essentially based on final inspection of the product conducted through a qualified process. The main drawback of this approach lies in the separation and , therefore, in the low feedback between manufacturing and quality control, leading to a very static quality system. As a remedy, the modern approach to quality management focuses on the need for continuous improvement through process-oriented quality control. In the classical approach, high reliability of nuclear fuel and high quality level of the main characteristics are assumed to be attained, at the manufacturing step, through 100% inspection of the product, generally with automated inspection equipment. Such a 100% final inspection is not appropriate to obtain a homogeneous product with minimum variability, and cannot be a substitute for the SPC tools (Statistical Process Control) which are rightly designed with this aim. On the other hand, SPC methods, which detect process changes and are used to keep the process u nder control , leading to the optimal distribution of the quality characteristics, do not protect against non systematic or local disturbances, at low frequency. Only systematic control is capable of detecting local quality troubles. In fact, both approaches, SPC and systematic inspection, are complementary , because they are remedies for distinct causes of process and product changes. The term 'statistical' in the expression 'SPC' refers less to the sampling techniques than to the control of global distribution parameters of product or process variables (generally location and dispersion parameters). The successive integration levels of process control methods with systematic inspection are described and illustrated by examples from FRAMATOME-FBFC fuel manufacturing, from the simple control chart for checking the performance stability of automated inspection equipment to the global process control system including systematic inspection. This kind of

An orientation theorem with parity conditions

DEFF Research Database (Denmark)

Frank, András; Jordan, Tibor; Szigeti, Zoltán

2001-01-01

Given a graph G=(V,E) and a set , an orientation of G is called T-odd if precisely the vertices of T get odd in-degree. We give a good characterization for the existence of a T-odd orientation for which there exist k edge-disjoint spanning arborescences rooted at a prespecified set of k roots. Ou...

Modulation of orientation-selective neurons by motion: when additive, when multiplicative?

Directory of Open Access Journals (Sweden)

Torsten eLüdge

2014-06-01

Full Text Available The recurrent interaction among orientation-selective neurons in the primary visual cortex (V1 is suited to enhance contours in a noisy visual scene. Motion is known to have a strong pop-up effect in perceiving contours, but how motion-sensitive neurons in V1 support contour detection remains vastly elusive. Here we suggest how the various types of motion-sensitive neurons observed in V1 should be wired together in a micro-circuitry to optimally extract contours in the visual scene. Motion-sensitive neurons can be selective about the direction of motion occurring at some spot or respond equally to all directions (pandirectional. We show that, in the light of figure-ground segregation, direction-selective motion neurons should additively modulate the corresponding orientation-selective neurons with preferred orientation orthogonal to the motion direction. In turn, to maximally enhance contours, pandirectional motion neurons should multiplicatively modulate all orientation-selective neurons with co-localized receptive fields. This multiplicative modulation amplifies the local V1-circuitry among co-aligned orientation-selective neurons for detecting elongated contours. We suggest that the additive modulation by direction- specific motion neurons is achieved through synaptic projections to the somatic region, and the multiplicative modulation by pandirectional motion neurons through projections to the apical region of orientation-specific pyramidal neurons. For the purpose of contour detection, the V1- intrinsic integration of motion information is advantageous over a downstream integration as it exploits the recurrent V1-circuitry designed for that task.

Influence of welding passes on grain orientation – The example of a multi-pass V-weld

International Nuclear Information System (INIS)

Ye, Jing; Moysan, Joseph; Song, Sung-Jin; Kim, Hak-Joon; Chassignole, Bertrand; Gueudré, Cécile; Dupond, Olivier

2012-01-01

The accurate modelling of grain orientations in a weld is important, when accurate ultrasonic test predictions of a welded assembly are needed. To achieve this objective, Electricité de France (EDF) and the Laboratoire de Caractérisation Non Destructive (LCND) have developed a dedicated code, which makes use of information recorded in the welding procedure. Among the welding parameters recorded, although the order in which the welding passes are made is of primary importance in the welding process, this information is not always well known or accurately described. In the present paper we analyse in greater detail the influence of the order of welding passes, using data obtained from the Centre for Advanced Non Destructive Evaluation (CANDE), derived from a dissimilar metal weld (DMW) with buttering. Comparisons are made using grain orientation measurements on a macrograph. - Highlights: ► Influence of welding process on grain structure is studied using the MINA model. ► For the first time the importance of a slight slope of the layers is evaluated. ► Two orders of passes are compared for the modelling approach. ► A major effect is observed due to a change in the order of passes.

Postdictive modulation of visual orientation.

Science.gov (United States)

Kawabe, Takahiro

2012-01-01

The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1) or whether the target was vertical or not (Supplementary experiment). The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation). The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2). Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach

OpenAIRE

Miao, Yongwu; Sloep, Peter; Koper, Rob

2009-01-01

Miao, Y., Sloep, P. B., & Koper, R. (2010). Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach. In D. Griffiths & R. Koper (Eds.), Rethinking Learning and Employment at a Time of Economic Uncertainty. Proceedings of the 6th TENCompetence Open workshop (pp. 22-33). November, 19-20, 2009, Manchester, UK. Bolton, UK: Institute for Educational Cybernetics, The University of Bolton. For the complete book please see http://hdl.handle.net/1820/3191

A single theoretical framework for circular features processing in humans: orientation and direction of motion compared

Directory of Open Access Journals (Sweden)

Tzvetomir eTzvetanov

2012-05-01

Full Text Available Common computational principles underly processing of various visual features in the cortex. They are considered to create similar patterns of contextual modulations in behavioral studies for different features as orientation and direction of motion. Here, I studied the possibility that a single theoretical framework, implemented in different visual areas, of circular feature coding and processing could explain these similarities in observations. Stimuli were created that allowed direct comparison of the contextual effects on orientation and motion direction with two different psychophysical probes: changes in weak and strong signal perception. One unique simplified theoretical model of circular feature coding including only inhibitory interactions, and decoding through standard vector average, successfully predicted the similarities in the two domains, while different feature population characteristics explained well the differences in modulation on both experimental probes. These results demonstrate how a single computational principle underlies processing of various features across the cortices.

Video processing for human perceptual visual quality-oriented video coding.

Science.gov (United States)

Oh, Hyungsuk; Kim, Wonha

2013-04-01

We have developed a video processing method that achieves human perceptual visual quality-oriented video coding. The patterns of moving objects are modeled by considering the limited human capacity for spatial-temporal resolution and the visual sensory memory together, and an online moving pattern classifier is devised by using the Hedge algorithm. The moving pattern classifier is embedded in the existing visual saliency with the purpose of providing a human perceptual video quality saliency model. In order to apply the developed saliency model to video coding, the conventional foveation filtering method is extended. The proposed foveation filter can smooth and enhance the video signals locally, in conformance with the developed saliency model, without causing any artifacts. The performance evaluation results confirm that the proposed video processing method shows reliable improvements in the perceptual quality for various sequences and at various bandwidths, compared to existing saliency-based video coding methods.

Software reliability evaluation of digital plant protection system development process using V and V

International Nuclear Information System (INIS)

Lee, Na Young; Hwang, Il Soon; Seong, Seung Hwan; Oh, Seung Rok

2001-01-01

In the nuclear power industry, digital technology has been introduced recently for the Instrumentation and Control (I and C) of reactor systems. For its application to the safety critical system such as Reactor Protection System(RPS), a reliability assessment is indispensable. Unlike traditional reliability models, software reliability is hard to evaluate, and should be evaluated throughout development lifecycle. In the development process of Digital Plant Protection System(DPPS), the concept of verification and validation (V and V) was introduced to assure the quality of the product. Also, test should be performed to assure the reliability. Verification procedure with model checking is relatively well defined, however, test is labor intensive and not well organized. In this paper, we developed the methodological process of combining the verification with validation test case generation. For this, we used PVS for the table specification and for the theorem proving. As a result, we could not only save time to design test case but also get more effective and complete verification related test case set. Add to this, we could extract some meaningful factors useful for the reliability evaluation both from the V and V and verification combined tests

Alignment and orientation of Ar+ in He+-Ar collisions

International Nuclear Information System (INIS)

Moudry, B.W.; Yenen, O.; Jaecks, D.H.

1994-01-01

We have measured the alignment and orientation parameters of the 2 F 7/2 0 and 2 F 5/2 0 states of Ar + formed in the two-electron process; He + +Ar→He(1s 2 )+Ar + (3p 4 4p'). These have been measured at a collision energy of 0.25 keV/amu and for scattering angles ranging from 0.94 to 3.75 . First, by comparing the orientation prameter for the Ar + [(3p 4 [ 1 D]4p' 2 F 7/2 0 ] and the Ar + [(3p 4 [ 1 D]4p' 2 F 5/2 0 ] states, we have experimentally determined the importance of the spin-dependent interactions for the present collision system, by testing the Percival-Seaton hypothesis of spin independence. If the Percival-Seaton hypothesis holds for this system, the orientation parameter should be J-independent. Secondly, the magnitude of the orientation prameter can be interpreted as resulting from the collective circulation of the unexcited 3p 4 electrons and the excited 4p electron. The direction of this collective circulation is compared to the propensity rule for colliding di-atom systems. (orig.)

An investigation of the initial attachment and orientation of osteoblast-like cells on laser grooved Ti-6Al-4V surfaces

Energy Technology Data Exchange (ETDEWEB)

Chen, J., E-mail: jianboc@Princeton.EDU [Princeton Institute of Science and Technology of Materials, Princeton University, Princeton, NJ 08544 (United States); Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544 (United States); Ulerich, J.P. [Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544 (United States); Abelev, E. [Department of Chemistry, Princeton University, Princeton, NJ 08544 (United States); Fasasi, A. [Princeton Institute of Science and Technology of Materials, Princeton University, Princeton, NJ 08544 (United States); Center for Energy Research, Obafemi Awolowo University, Ile-Ife (Nigeria); Arnold, C.B.; Soboyejo, W.O. [Princeton Institute of Science and Technology of Materials, Princeton University, Princeton, NJ 08544 (United States); Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544 (United States)

2009-05-05

This paper presents the results of an experimental study of the initial cell spreading and adhesion on longitudinally- and transversally-oriented micro-grooves produced by the laser irradiation of laser grooved Ti-6Al-4V surfaces. The initial spreading and orientations of human osteosarcoma (HOS) cells were observed and quantified after 15-min, 1-hour, 4-hour and 24-hour cell culture periods. Immuno-fluorescence staining of adhesion proteins (actin and vinculin) was then used to study the spreading and adhesion of HOS cells in 1 hour and 4 hour culture experiments. The initial cell adhesion was also quantified using enzymatic detachment tests. The results showed that cell spreading and adhesion were enhanced by longitudinally- and transversally-oriented micro-grooves. The effects, which increase with time, were not remarkable after 1 hour, but obvious after 4 hours. Contact guidance was found to promote cell adhesion due to the increase in interactions between the focal adhesions and the patterned extra-cellular matrix (ECM) proteins on the laser micro-grooved surfaces.

An investigation of the initial attachment and orientation of osteoblast-like cells on laser grooved Ti-6Al-4V surfaces

International Nuclear Information System (INIS)

Chen, J.; Ulerich, J.P.; Abelev, E.; Fasasi, A.; Arnold, C.B.; Soboyejo, W.O.

2009-01-01

This paper presents the results of an experimental study of the initial cell spreading and adhesion on longitudinally- and transversally-oriented micro-grooves produced by the laser irradiation of laser grooved Ti-6Al-4V surfaces. The initial spreading and orientations of human osteosarcoma (HOS) cells were observed and quantified after 15-min, 1-hour, 4-hour and 24-hour cell culture periods. Immuno-fluorescence staining of adhesion proteins (actin and vinculin) was then used to study the spreading and adhesion of HOS cells in 1 hour and 4 hour culture experiments. The initial cell adhesion was also quantified using enzymatic detachment tests. The results showed that cell spreading and adhesion were enhanced by longitudinally- and transversally-oriented micro-grooves. The effects, which increase with time, were not remarkable after 1 hour, but obvious after 4 hours. Contact guidance was found to promote cell adhesion due to the increase in interactions between the focal adhesions and the patterned extra-cellular matrix (ECM) proteins on the laser micro-grooved surfaces.

Analyzing empowerment oriented email consultation for parents : Development of the Guiding the Empowerment Process model

NARCIS (Netherlands)

dr. Christa C.C. Nieuwboer

2014-01-01

Background. Online consultation is increasingly offered by parenting practitioners, but it is not clear if it is feasible to provide empowerment oriented support in single session email consultation. Method. Based on empowerment theory we developed the Guiding the Empowerment Process model (GEP

On issues of constructing an exception handling mechanism for CSP-based process-oriented concurrent software

NARCIS (Netherlands)

Jovanovic, D.S.; Orlic, B.; Broenink, Johannes F.; Broenink, J.F.; Roebers, H.W.; Sunter, J.P.E.; Welch, P.H.; Wood, D.C.

2005-01-01

This paper discusses issues, possibilities and existing approaches for fitting an exception handling mechanism (EHM) in CSP-based process-oriented software architectures. After giving a survey on properties desired for a concurrent EHM, specific problems and a few principal ideas for including

Neuronal responses in visual area V2 (V2) of macaque monkeys with strabismic amblyopia.

Science.gov (United States)

Bi, H; Zhang, B; Tao, X; Harwerth, R S; Smith, E L; Chino, Y M

2011-09-01

Amblyopia, a developmental disorder of spatial vision, is thought to result from a cascade of cortical deficits over several processing stages beginning at the primary visual cortex (V1). However, beyond V1, little is known about how cortical development limits the visual performance of amblyopic primates. We quantitatively analyzed the monocular and binocular responses of V1 and V2 neurons in a group of strabismic monkeys exhibiting varying depths of amblyopia. Unlike in V1, the relative effectiveness of the affected eye to drive V2 neurons was drastically reduced in the amblyopic monkeys. The spatial resolution and the orientation bias of V2, but not V1, neurons were subnormal for the affected eyes. Binocular suppression was robust in both cortical areas, and the magnitude of suppression in individual monkeys was correlated with the depth of their amblyopia. These results suggest that the reduced functional connections beyond V1 and the subnormal spatial filter properties of V2 neurons might have substantially limited the sensitivity of the amblyopic eyes and that interocular suppression was likely to have played a key role in the observed alterations of V2 responses and the emergence of amblyopia.

Effect of Particle Orientation during Thermal Processing of Canned Peach Halves: A CFD Simulation

Directory of Open Access Journals (Sweden)

Adreas Dimou

2014-05-01

Full Text Available The objective of this work was to apply Computational Fluid Dynamics (CFD to study the effect of particle orientation on fluid flow, temperature evolution, as well as microbial destruction, during thermal processing of still cans filled with peach halves in sugar syrup. A still metal can with four peach halves in 20% sugar syrup was heated at 100 °C for 20 min and thereafter cooled at 20 °C. Infinite heat transfer coefficient between heating medium and external can wall was considered. Peach halves were orderly placed inside the can with the empty space originally occupied by the kernel facing, in all peaches, either towards the top or the bottom of the can. In a third situation, the can was placed horizontally. Simulations revealed differences on particle temperature profiles, as well as process F values and critical point location, based on their orientation. At their critical points, peach halves with the kernel space facing towards the top of the can heated considerably slower and cooled faster than the peaches having their kernel space facing towards the bottom of the can. The horizontal can case exhibited intermediate cooling but the fastest heating rates and the highest F process values among the three cases examined. The results of this study could be used in designing of thermal processes with optimal product quality.

Monetary rewards influence retrieval orientations.

Science.gov (United States)

Halsband, Teresa M; Ferdinand, Nicola K; Bridger, Emma K; Mecklinger, Axel

2012-09-01

Reward anticipation during learning is known to support memory formation, but its role in retrieval processes is so far unclear. Retrieval orientations, as a reflection of controlled retrieval processing, are one aspect of retrieval that might be modulated by reward. These processes can be measured using the event-related potentials (ERPs) elicited by retrieval cues from tasks with different retrieval requirements, such as via changes in the class of targeted memory information. To determine whether retrieval orientations of this kind are modulated by reward during learning, we investigated the effects of high and low reward expectancy on the ERP correlates of retrieval orientation in two separate experiments. The reward manipulation at study in Experiment 1 was associated with later memory performance, whereas in Experiment 2, reward was directly linked to accuracy in the study task. In both studies, the participants encoded mixed lists of pictures and words preceded by high- or low-reward cues. After 24 h, they performed a recognition memory exclusion task, with words as the test items. In addition to a previously reported material-specific effect of retrieval orientation, a frontally distributed, reward-associated retrieval orientation effect was found in both experiments. These findings suggest that reward motivation during learning leads to the adoption of a reward-associated retrieval orientation to support the retrieval of highly motivational information. Thus, ERP retrieval orientation effects not only reflect retrieval processes related to the sought-for materials, but also relate to the reward conditions with which items were combined during encoding.

Postdictive modulation of visual orientation.

Directory of Open Access Journals (Sweden)

Takahiro Kawabe

Full Text Available The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1 or whether the target was vertical or not (Supplementary experiment. The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation. The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2. Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

Negotiating Race and Sexual Orientation in the College Choice Process of Black Gay Males

Science.gov (United States)

Squire, Dian D.; Mobley, Steve D., Jr.

2015-01-01

This study explores the college choice process for Black gay males and what factors played significant roles in why they chose to attend either HBCUs or PWIs. Findings revealed that these students considered race and sexual orientation in different ways when deciding to attend either an HBCU or PWI. Implications for high school counselors and…

Advances in oriental document analysis and recognition techniques

CERN Document Server

Lee, Seong-Whan

1999-01-01

In recent years, rapid progress has been made in computer processing of oriental languages, and the research developments in this area have resulted in tremendous changes in handwriting processing, printed oriental character recognition, document analysis and recognition, automatic input methodologies for oriental languages, etc. Advances in computer processing of oriental languages can also be seen in multimedia computing and the World Wide Web. Many of the results in those domains are presented in this book.

Characterization of the crystal orientation in mono-oriented films of HDPE/LLDPE blends by IR dichroism

Energy Technology Data Exchange (ETDEWEB)

Canevarolo, Sebastião V., E-mail: caneva@ufscar.br; Ravazzi, Camila; Silva, Jorge, E-mail: jorge.silva@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos Rod. Washington Luiz Km 235, 13565-905, SãoCarlos, SP - Brazil (Brazil); Elias, Marcelo [Motechfilm Produtos Plásticos, Estrada Municipal do Bonfim, 100, Pinhal, Cabreúva, SP - Brazil (Brazil)

2016-03-09

Polyethylene films are a common packaging material. The level and type of chain orientation in these films are a very important property which is of great care and concern of the converter personnel during the conformation process. Usually bi-orientation is the conventional procedure but when easy tear in one direction is needed mono-orientation is sought. This paper deal with the characterization of the crystalline orientation in films of polyethylene blends (HDPE/LLDPE) which have being oriented in two steps: initially the polymer was bi-oriented via extrusion-blown, cooled, and then in a second process hot stretched along the machine direction in order to produce mono-oriented films. In order to evaluate the orientation of the film, the polarization of the FT-IR beam was rotated 360° in steps of 5° by rotating the polarizer. In each step the absorbance spectrum was recorded and the corresponding dichroic ratio (DR) calculated after subtracting the baseline. With differential scanning calorimetry (DSC) was possible to infer about the changes in the morphology caused by the stretching.

PSYCHOMETRIC ANALYSIS OF TWO ANALOGOUS VALUE ASSESSMENT TOOLS: «TERMINAL VALUES QUESTIONNAIRE» BY I.G. SENIN AND «AXIOLOGICAL ORIENTATION OF THE PERSONALITY» QUESTIONNAIRE BY A.V. KAPTSOV & L.V. KARPUSHINA

Directory of Open Access Journals (Sweden)

Aleksey Yur’evich Kalugin

2015-03-01

Full Text Available The increase in the number of psychodiagnostic methods, aimed at the study of the value-semantic sphere confronts researchers with the task of selecting the most reliable and valid instruments. We set the task to conduct psychometric studies of two analogous tools that measure axiological sphere of personality: «Terminal values questionnaire» by I.G. Senin, «Axiological orientation of the personality» test by A.V. Kaptsov & L.V. Karpushina. Scales were checked for internal consistency, and construct validity of questionnaires was studied in greater detail. We offer an approach to the study of construct validity through comparing empirically obtained constructs with theoretical constructs on the basis of objective indicators of interrelations between them.

The Effectiveness of Process-Oriented Guided Inquiry Learning to Reduce Alternative Conceptions in Secondary Chemistry

Science.gov (United States)

Barthlow, Michelle J.; Watson, Scott B.

2014-01-01

A nonequivalent, control group design was used to investigate student achievement in secondary chemistry. This study investigated the effect of process-oriented guided inquiry learning (POGIL) in high school chemistry to reduce alternate conceptions related to the particulate nature of matter versus traditional lecture pedagogy. Data were…

[Recovery of consciousness: process-oriented approach].

Science.gov (United States)

Gusarova, S B

2014-01-01

Traditionally psychological neurorehabilitation of neurosurgical patients is provided subject to availability of clear consciousness and minimal potential to communicate verbally. Cognitive and emotional disorders, problems in social adaptation, neurotic syndromes are normally targets in such cases. We work with patients having survived severe brain damage being in different states of consciousness: vegetative state, minimal state of consciousness, mutism, confusion, posttraumatic Korsaroff syndrom. Psychologist considers recovery of consciousness as the target besides traditional tasks. Construction of communication with patient is central part of such job, where the patient remains unable to contact verbally, yet it is impossible to consider potential aphasia. This is a non-verbal "dialogue" with patient created by psychologist with gradual development and involving other people and objects of environment. Inline with modern neuroscientific achievements demonstrating ability to recognize by patients with severe brain injury (A. Owen, S. Laureys, M. Monti, M. Coleman, A. Soddu, M. Boly and others) we base upon psychological science, on psychotherapeutic approaches containing instruments inevitable to work with patients in altered states of consciousness and creation of non-verbal communication with patient (Jung, Reich, Alexander, Lowen, Keleman, Arnold and Amy Mindell, S. Tomandl, D. Boadella, A. Längle, P. Levin etc). This article will include 15 years of experience to apply Process-oriented approach by A. Mindell to recovery of consciousness of neurosurgical patients based on work with "minimal signals" (micro moves, breath, mimic reactions etc.), principle of feedback, psychosomatic resonance, empathy.

Orienting to face expression during encoding improves men's recognition of own gender faces.

Science.gov (United States)

Fulton, Erika K; Bulluck, Megan; Hertzog, Christopher

2015-10-01

It is unclear why women have superior episodic memory of faces, but the benefit may be partially the result of women engaging in superior processing of facial expressions. Therefore, we hypothesized that orienting instructions to attend to facial expression at encoding would significantly improve men's memory of faces and possibly reduce gender differences. We directed 203 college students (122 women) to study 120 faces under instructions to orient to either the person's gender or their emotional expression. They later took a recognition test of these faces by either judging whether they had previously studied the same person or that person with the exact same expression; the latter test evaluated recollection of specific facial details. Orienting to facial expressions during encoding significantly improved men's recognition of own-gender faces and eliminated the advantage that women had for male faces under gender orienting instructions. Although gender differences in spontaneous strategy use when orienting to faces cannot fully account for gender differences in face recognition, orienting men to facial expression during encoding is one way to significantly improve their episodic memory for male faces. Copyright © 2015 Elsevier B.V. All rights reserved.

Orientation decoding: Sense in spirals?

Science.gov (United States)

Clifford, Colin W G; Mannion, Damien J

2015-04-15

The orientation of a visual stimulus can be successfully decoded from the multivariate pattern of fMRI activity in human visual cortex. Whether this capacity requires coarse-scale orientation biases is controversial. We and others have advocated the use of spiral stimuli to eliminate a potential coarse-scale bias-the radial bias toward local orientations that are collinear with the centre of gaze-and hence narrow down the potential coarse-scale biases that could contribute to orientation decoding. The usefulness of this strategy is challenged by the computational simulations of Carlson (2014), who reported the ability to successfully decode spirals of opposite sense (opening clockwise or counter-clockwise) from the pooled output of purportedly unbiased orientation filters. Here, we elaborate the mathematical relationship between spirals of opposite sense to confirm that they cannot be discriminated on the basis of the pooled output of unbiased or radially biased orientation filters. We then demonstrate that Carlson's (2014) reported decoding ability is consistent with the presence of inadvertent biases in the set of orientation filters; biases introduced by their digital implementation and unrelated to the brain's processing of orientation. These analyses demonstrate that spirals must be processed with an orientation bias other than the radial bias for successful decoding of spiral sense. Copyright © 2014 Elsevier Inc. All rights reserved.

Modelling of the $t\\bar{t}H$ and $t\\bar{t}V$ $(V=W,Z)$ processes for $\\sqrt{s}=13$ TeV ATLAS analyses

CERN Document Server

The ATLAS collaboration

2016-01-01

Production of top quark pairs in association with heavy Standard Model bosons is important both as a signal and a background in several ATLAS analyses. Strong constraints on such processes cannot at present be obtained from data, and therefore their modelling by Monte Carlo simulation as well as the associated uncertainties are important. This note documents the Monte Carlo samples currently being used in ATLAS for the $t\\bar{t}H$ and $t\\bar{t}V$ ($V=W,Z$ vector bosons) processes for $\\sqrt{s}=13$ TeV proton-proton collisions.

Capability-oriented agent theory and its applications in dependable systems and process engineering

Energy Technology Data Exchange (ETDEWEB)

Thunem, Atoosa P-J.

2004-04-15

During the rapid growth of computerised systems in the past 15 years, the variety of services and their efficiency have been the strongest deciding factors in design and development of the systems within various industrial branches. At the same time, the introduction and popularity of emerging design and development techniques seems to have forced the industry to include these in their product development process. Unfortunately, too many examples of lack of use or erroneous use of these techniques within industries such as telecommunications, telemedicine, aerospace and indeed the energy sector indicate that a common understanding of and belief in the rationale behind the techniques and their solution domains has not been obtained. At the same time, a tremendous increase in the number of emerging techniques has made such an understanding difficult to gain, especially when the techniques share the same application field, but differ in few yet important issues. Finally, the lack of knowledge about system aspects and the integration of various abstraction levels to describe them have added even more to the confusion on how to use different techniques. The work resulting in the Capability-Oriented Agent Theory began while trying to find more descriptive system models, taking into account a wider selection of system aspects. Although related to object-oriented and agent-oriented principles, the theory differs from such principles in many respects. Among others, its focal point is on a category of system aspects neither addressed nor recognised within such principles before. Additionally, the theory opposes the well-established idea of distinct separation between requirement, design, implementation and test specifications, but suggests a systematic integration of the related activities, hence to increase their traceability and intercommunication in both a top-down and a bottom-up manner along the development process. (Author)

Query Processing and Interlinking of Fuzzy Object-Oriented Database

OpenAIRE

Shweta Dwivedi; Santosh Kumar

2017-01-01

Due to the many limitation and poor data handling in the existing relational database, the software professional and researchers moves towards the object-oriented database which has much better capability to handling the real and complex real world data i.e. clear and crisp data and also have the capability to perform some huge and complex queries in an effective manner. On the other hand, a new approach in database is introduced named as Fuzzy Object-Oriented Database (FOOD); it has all the ...

Fuzzy rule-based model for optimum orientation of solar panels using satellite image processing

International Nuclear Information System (INIS)

Zaher, A; Thiery, F; Grieu, S; Traoré, A; N’goran, Y

2017-01-01

In solar energy converting systems, a particular attention is paid to the orientation of solar collectors in order to optimize the overall system efficiency. In this context, the collectors can be fixed or oriented by a continuous solar tracking system. The proposed approach is based on METEOSAT images processing in order to detect the cloud coverage and its duration. These two parameters are treated by a fuzzy inference system deciding the optimal position of the solar panel. In fact, three weather cases can be considered: clear, partly covered or overcast sky. In the first case, the direct sunlight is more important than the diffuse radiation, thus the panel is always pointed towards the sun. In the overcast case, the solar beam is close to zero and the panel is placed horizontally to receive the diffuse radiation. Under partly covered conditions, the fuzzy inference system decides which of the previous positions is more efficient. The proposed approach is implemented using experimental prototype located in Perpignan (France). On a period of 17 months, the results are very satisfactory, with power gains of up to 23 % compared to the collectors oriented by a continuous solar tracking. (paper)

The GENIE Universal, Object-Oriented Neutrino Generator

International Nuclear Information System (INIS)

Andreopoulos, C.

2006-01-01

A Universal Object-Oriented/C++ Neutrino Monte Carlo Generator (GENIE) is briefly described. The purpose of this large scale software system is to become the 'canonical' Monte Carlo for Neutrino Interaction Physics whose validity will extend to all neutrino types and nuclear targets in the energy range from few MeV to few hundred GeV. GENIE attempts to unify the Monte Carlo generation approaches used by a host of different, smaller procedural systems in a modern object-oriented software design. It is already a mature software system that currently consists of ∼100,000 lines of C++ code (∼350 classes organised in ∼40 packages)

Implementing Process Oriented Guided Inquiry Learning (POGIL) in Undergraduate Biomechanics: Lessons Learned by a Novice

Science.gov (United States)

Simonson, Shawn R.; Shadle, Susan E.

2013-01-01

Process Oriented Guided Inquiry Learning (POGIL) uses specially designed activities and cooperative learning to teach content and to actively engage students in inquiry, analytical thinking and teamwork. It has been used extensively in Chemistry education, but the use of POGIL is not well documented in other physical and biological sciences. This…

A case of complex regional pain syndrome with agnosia for object orientation.

Science.gov (United States)

Robinson, Gail; Cohen, Helen; Goebel, Andreas

2011-07-01

This systematic investigation of the neurocognitive correlates of complex regional pain syndrome (CRPS) in a single case also reports agnosia for object orientation in the context of persistent CRPS. We report a patient (JW) with severe long-standing CRPS who had no difficulty identifying and naming line drawings of objects presented in 1 of 4 cardinal orientations. In contrast, he was extremely poor at reorienting these objects into the correct upright orientation and in judging whether an object was upright or not. Moreover, JW made orientation errors when copying drawings of objects, and he also showed features of mirror reversal in writing single words and reading single letters. The findings are discussed in relation to accounts of visual processing. Agnosia for object orientation is the term for impaired knowledge of an object's orientation despite good recognition and naming of the same misoriented object. This defect has previously only been reported in patients with major structural brain lesions. The neuroanatomical correlates are discussed. The patient had no structural brain lesion, raising the possibility that nonstructural reorganisation of cortical networks may be responsible for his deficits. Other patients with CRPS may have related neurocognitive defects. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

Learning to see the difference specifically alters the most informative V4 neurons.

Science.gov (United States)

Raiguel, Steven; Vogels, Rufin; Mysore, Santosh G; Orban, Guy A

2006-06-14

Perceptual learning is an instance of adult plasticity whereby training in a sensory (e.g., a visual task) results in neuronal changes leading to an improved ability to perform the task. Yet studies in primary visual cortex have found that changes in neuronal response properties were relatively modest. The present study examines the effects of training in an orientation discrimination task on the response properties of V4 neurons in awake rhesus monkeys. Results indicate that the changes induced in V4 are indeed larger than those in V1. Nonspecific effects of training included a decrease in response variance, and an increase in overall orientation selectivity in V4. The orientation-specific changes involved a local steepening in the orientation tuning curve around the trained orientation that selectively improved orientation discriminability at the trained orientation. Moreover, these changes were largely confined to the population of neurons whose orientation tuning was optimal for signaling small differences in orientation at the trained orientation. Finally, the modifications were restricted to the part of the tuning curve close to the trained orientation. Thus, we conclude that it is the most informative V4 neurons, those most directly involved in the discrimination, that are specifically modified by perceptual learning.

Influence of preferred orientation of minerals in the mineralogical identification process by X-ray diffraction

Energy Technology Data Exchange (ETDEWEB)

Silva, Amanda Luzia da; Oliveira, Arno H. de [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear; Fernandes, Maria Lourdes Souza, E-mail: lourdesfernandes@ufmg.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Inst. de GeoCiencias. Centro de Pesquisa Professor Manoel Teixeira da Costa

2011-07-01

The X-ray diffraction corresponds to one of the main techniques for characterization of microstructures in crystalline materials, widely used in the identification of minerals in samples of geological materials. Some minerals have a property called preferred orientation which corresponds to the orientation tendency of the crystals of ground minerals to orient themselves in certain directions according to a preferred crystallographic plane. This property affects the analysis by X-ray diffraction and this fact can generates erroneous results in the characterization. The purpose of this study is to identify the negative influence of the preferred orientation of a mineral in the generation of diffraction patterns obtained in the X-ray diffraction analysis. For this, a sample of muscovite, a mineral of mica group, was prepared by two different methods: the frontal method and the back loading method. In the analysis using the frontal method there was displacement of the XRD pattern in the abscissa axis, where it was observed changes in interplanar distance and angle 2{theta} values, which are essential information for characterization and identification of a mineral. In the analysis using the back loading method, the generated XRD pattern showed no displacement in the axis of abscissas and showed interplanar distance and angle 2{theta} values closer to the real values for the muscovite. The results showed that one can only make improvements to the process of sample preparation minimizing the effect of preferred orientation in the analysis. There is no need to change conditions of diffractometer measurements. (author)

Influence of preferred orientation of minerals in the mineralogical identification process by X-ray diffraction

International Nuclear Information System (INIS)

Silva, Amanda Luzia da; Oliveira, Arno H. de; Fernandes, Maria Lourdes Souza

2011-01-01

The X-ray diffraction corresponds to one of the main techniques for characterization of microstructures in crystalline materials, widely used in the identification of minerals in samples of geological materials. Some minerals have a property called preferred orientation which corresponds to the orientation tendency of the crystals of ground minerals to orient themselves in certain directions according to a preferred crystallographic plane. This property affects the analysis by X-ray diffraction and this fact can generates erroneous results in the characterization. The purpose of this study is to identify the negative influence of the preferred orientation of a mineral in the generation of diffraction patterns obtained in the X-ray diffraction analysis. For this, a sample of muscovite, a mineral of mica group, was prepared by two different methods: the frontal method and the back loading method. In the analysis using the frontal method there was displacement of the XRD pattern in the abscissa axis, where it was observed changes in interplanar distance and angle 2θ values, which are essential information for characterization and identification of a mineral. In the analysis using the back loading method, the generated XRD pattern showed no displacement in the axis of abscissas and showed interplanar distance and angle 2θ values closer to the real values for the muscovite. The results showed that one can only make improvements to the process of sample preparation minimizing the effect of preferred orientation in the analysis. There is no need to change conditions of diffractometer measurements. (author)

Integrating traditional nursing service orientation content with electronic medical record orientation.

Science.gov (United States)

Harton, Brenda B; Borrelli, Larry; Knupp, Ann; Rogers, Necolen; West, Vickie R

2009-01-01

Traditional nursing service orientation classes at an acute care hospital were integrated with orientation to the electronic medical record to blend the two components in a user-friendly format so that the learner is introduced to the culture, processes, and documentation methods of the organization, with an opportunity to document online in a practice domain while lecture and discussion information is fresh.

Radiation-enhanced precipitation in a V-10 wt % Ti alloy

International Nuclear Information System (INIS)

Agarwal, S.C.; Taylor, A.

1976-01-01

A V-10 wt % Ti alloy was irradiated with 2.7 MeV 51 V + at 650 0 C to doses of 2 to 60 dpa. No void swelling was observed at any dose. The irradiation resulted in an enhancement of a precipitation process similar to that observed in unirradiated materials. The precipitates in irradiated specimens were found to have the NaCl-type cubic crystal structure with a lattice parameter of TiO. The orientation relationship between the matrix and the precipitates was the same as that observed under thermal equilibrium conditions in unirradiated materials

The Influence of Cross-Sectional Shape and Orientation of Micropillar Surface on Microdroplet Formation by a Dewetting Process

Directory of Open Access Journals (Sweden)

Bambang Arip Dwiyantoro

2013-07-01

Full Text Available In this study the dewetting process on micropillars of three different cross-sectional shapes, i.e. circular, square and triangular, was numerically investigated. The influence of the orientation of the triangular and square micropillars on the dewetting behavior was also studied. The numerical simulations showed that the cross-sectional shapes of the micropillars and their orientation play an important role in determining the flow pattern of the dewetting process, especially the evolution and movement of the meniscus across the micropillar before a microdroplet is formed. The diameter of the microdroplets is mainly determined by the capillary effect, viscous drag and fluid inertia contributed by the peeling rate and the thickness of the water layer above the micropillar. The numerical results also indicate that the hydraulic diameter of the micropillars (Dp is one of the parameters governing the size of the microdroplets formed on the top surface of the micropillars after the dewetting process, while the microdroplet diameter is almost insensitive to the cross-sectional shape and orientation of the micropillars. The dimensionless diameter of the microdroplets (d can then be expressed as a function of a dimensionless group, i.e. the Ohnesorge number (Oh, the capillary number (Ca, the dimensionless liquid thickness (H, and the contact angle (q.

Processing, microstructure and properties of grain-oriented ferroelectric ceramics

International Nuclear Information System (INIS)

Okazaki, K.; Igarashi, H.; Nagata, K.; Yamamoto, T.; Tashiro, S.

1986-01-01

Grain oriented ferroelectric ceramics such as PbBi/sub 2/Nb/sub 2/O/sub 9/, bismuth compound with layer structure, (PbLa)Nb/sub 2/O/sub 6/, tungsten-bronze structure and SbSI were prepared by an uni-axial hot-pressing, a double-stage hot-pressing and tape casting methods. Microstructures of them were examined by SEM and the prefered textures of the ceramics composed of thin plate and/or needle crystallites were ascertained. Grain orientation effects on electrical, piezoelectric, optical and mechanical properties are discussed

CSRL-V: processed ENDF/B-V 227-neutron-group and pointwise cross-section libraries for criticality safety, reactor, and shielding studies

International Nuclear Information System (INIS)

Ford, W.E. III; Diggs, B.R.; Petrie, L.M.; Webster, C.C.; Westfall, R.M.

1982-01-01

A P 3 227-neutron-group cross-section library has been processed for the subsequent generation of problem-dependent fine- or broad-group cross sections for a broad range of applications, including shipping cask calculations, general criticality safety analyses, and reactor core and shielding analyses. The energy group structure covers the range 10 -5 eV - 20 MeV, including 79 thermal groups below 3 eV. The 129-material library includes processed data for all materials in the ENDF/B-V General Purpose File, several data sets prepared from LENDL data, hydrogen with water- and polyethyelene-bound thermal kernels, deuterium with C 2 O-bound thermal kernels, carbon with a graphite thermal kernel, a special 1/V data set, and a dose factor data set. The library, which is in AMPX master format, is designated CSRL-V (Criticality Safety Reference Library based on ENDF/B-V data). Also included in CSRL-V is a pointwise total, fission, elastic scattering, and (n,γ) cross-section library containing data sets for all ENDF/B-V resonance materials. Data in the pointwise library were processed with the infinite dilute approximation at a temperature of 296 0 K

Numerical approach of the injection molding process of fiber-reinforced composite with considering fiber orientation

Science.gov (United States)

Nguyen Thi, T. B.; Yokoyama, A.; Ota, K.; Kodama, K.; Yamashita, K.; Isogai, Y.; Furuichi, K.; Nonomura, C.

2014-05-01

One of the most important challenges in the injection molding process of the short-glass fiber/thermoplastic composite parts is being able to predict the fiber orientation, since it controls the mechanical and the physical properties of the final parts. Folgar and Tucker included into the Jeffery equation a diffusive type of term, which introduces a phenomenological coefficient for modeling the randomizing effect of the mechanical interactions between the fibers, to predict the fiber orientation in concentrated suspensions. Their experiments indicated that this coefficient depends on the fiber volume fraction and aspect ratio. However, a definition of the fiber interaction coefficient, which is very necessary in the fiber orientation simulations, hasn't still been proven yet. Consequently, this study proposed a developed fiber interaction model that has been introduced a fiber dynamics simulation in order to obtain a global fiber interaction coefficient. This supposed that the coefficient is a sum function of the fiber concentration, aspect ratio, and angular velocity. The proposed model was incorporated into a computer aided engineering simulation package C-Mold. Short-glass fiber/polyamide-6 composites were produced in the injection molding with the fiber weight concentration of 30 wt.%, 50 wt.%, and 70 wt.%. The physical properties of these composites were examined, and their fiber orientation distributions were measured by micro-computed-tomography equipment μ-CT. The simulation results showed a good agreement with experiment results.

Basic visual perceptual processes in children with typical development and cerebral palsy: The processing of surface, length, orientation, and position.

Science.gov (United States)

Schmetz, Emilie; Magis, David; Detraux, Jean-Jacques; Barisnikov, Koviljka; Rousselle, Laurence

2018-03-02

The present study aims to assess how the processing of basic visual perceptual (VP) components (length, surface, orientation, and position) develops in typically developing (TD) children (n = 215, 4-14 years old) and adults (n = 20, 20-25 years old), and in children with cerebral palsy (CP) (n = 86, 5-14 years old) using the first four subtests of the Battery for the Evaluation of Visual Perceptual and Spatial processing in children. Experiment 1 showed that these four basic VP processes follow distinct developmental trajectories in typical development. Experiment 2 revealed that children with CP present global and persistent deficits for the processing of basic VP components when compared with TD children matched on chronological age and nonverbal reasoning abilities.

SU-E-J-15: Automatically Detect Patient Treatment Position and Orientation in KV Portal Images

International Nuclear Information System (INIS)

Qiu, J; Yang, D

2015-01-01

Purpose: In the course of radiation therapy, the complex information processing workflow will Result in potential errors, such as incorrect or inaccurate patient setups. With automatic image check and patient identification, such errors could be effectively reduced. For this purpose, we developed a simple and rapid image processing method, to automatically detect the patient position and orientation in 2D portal images, so to allow automatic check of positions and orientations for patient daily RT treatments. Methods: Based on the principle of portal image formation, a set of whole body DRR images were reconstructed from multiple whole body CT volume datasets, and fused together to be used as the matching template. To identify the patient setup position and orientation shown in a 2D portal image, the 2D portal image was preprocessed (contrast enhancement, down-sampling and couch table detection), then matched to the template image so to identify the laterality (left or right), position, orientation and treatment site. Results: Five day’s clinical qualified portal images were gathered randomly, then were processed by the automatic detection and matching method without any additional information. The detection results were visually checked by physicists. 182 images were correct detection in a total of 200kV portal images. The correct rate was 91%. Conclusion: The proposed method can detect patient setup and orientation quickly and automatically. It only requires the image intensity information in KV portal images. This method can be useful in the framework of Electronic Chart Check (ECCK) to reduce the potential errors in workflow of radiation therapy and so to improve patient safety. In addition, the auto-detection results, as the patient treatment site position and patient orientation, could be useful to guide the sequential image processing procedures, e.g. verification of patient daily setup accuracy. This work was partially supported by research grant from

SU-E-J-15: Automatically Detect Patient Treatment Position and Orientation in KV Portal Images

Energy Technology Data Exchange (ETDEWEB)

Qiu, J [Washington University in St Louis, Taian, Shandong (China); Yang, D [Washington University School of Medicine, St Louis, MO (United States)

2015-06-15

Purpose: In the course of radiation therapy, the complex information processing workflow will Result in potential errors, such as incorrect or inaccurate patient setups. With automatic image check and patient identification, such errors could be effectively reduced. For this purpose, we developed a simple and rapid image processing method, to automatically detect the patient position and orientation in 2D portal images, so to allow automatic check of positions and orientations for patient daily RT treatments. Methods: Based on the principle of portal image formation, a set of whole body DRR images were reconstructed from multiple whole body CT volume datasets, and fused together to be used as the matching template. To identify the patient setup position and orientation shown in a 2D portal image, the 2D portal image was preprocessed (contrast enhancement, down-sampling and couch table detection), then matched to the template image so to identify the laterality (left or right), position, orientation and treatment site. Results: Five day’s clinical qualified portal images were gathered randomly, then were processed by the automatic detection and matching method without any additional information. The detection results were visually checked by physicists. 182 images were correct detection in a total of 200kV portal images. The correct rate was 91%. Conclusion: The proposed method can detect patient setup and orientation quickly and automatically. It only requires the image intensity information in KV portal images. This method can be useful in the framework of Electronic Chart Check (ECCK) to reduce the potential errors in workflow of radiation therapy and so to improve patient safety. In addition, the auto-detection results, as the patient treatment site position and patient orientation, could be useful to guide the sequential image processing procedures, e.g. verification of patient daily setup accuracy. This work was partially supported by research grant from

Nurses' hospital orientation and future research challenges: an integrative review.

Science.gov (United States)

Peltokoski, J; Vehviläinen-Julkunen, K; Miettinen, M

2016-03-01

This study aimed to describe the research on registered nurses' orientation processes in specialized hospital settings in order to illustrate directions for future research. The complex healthcare environment and the impact of nursing shortage and turnover make the hospital orientation process imperative. There is a growing recognition regarding research interests to meet the needs for evidence-based, effective and economically sound hospital orientation strategies. An integrative literature review was performed on publications from the period 2000 to 2013 included in the CINAHL and PubMed databases. English-language studies were included. Themes guiding the analysis were definition of the hospital orientation process, research topics, data collection and instruments and research evidence. Narrative synthesis was used. Eleven papers met the inclusion criteria. The conceptualization of orientation process reflected the complexity of the phenomenon. Less attention has been paid to designs to establish correlations or relationships between selected variables and hospital orientation process. The outcomes of hospital orientation programmes were limited primarily to retention and job satisfaction. The research evidence therefore cannot be evaluated as strong. The lack of an evidence-based approach makes it difficult to develop a comprehensive orientation process. Further research should explore interventions that will enhance the quality of hospital orientation practices to improve nurses' retention and job satisfaction. To provide a comprehensive hospital orientation process, hospital administrators have to put in place human resource development strategies along with practice implications and research efforts. Comprehensive hospital orientation benefits and outcomes should be visible to policy makers. © 2016 International Council of Nurses.

Laser method of free atom nuclei orientation

International Nuclear Information System (INIS)

Barabanov, A.L.

1987-01-01

Orientation process of free atom (atoms in beams) nuclei, scattering quanta of circularly polarized laser radiation is considered. A method for the evaluation of nuclei orientation parameters is developed. It is shown that in the process of pumping between the ground and first excited atomic states with electron shell spins J 1 and J 2 , so that J 2 = J 1 + 1, a complete orientation of nuclei can be attained

Crystal orientation dependent thermoelectric properties of highly oriented aluminum-doped zinc oxide thin films

KAUST Repository

Abutaha, Anas I.

2013-02-06

We demonstrate that the thermoelectric properties of highly oriented Al-doped zinc oxide (AZO) thin films can be improved by controlling their crystal orientation. The crystal orientation of the AZO films was changed by changing the temperature of the laser deposition process on LaAlO3 (100) substrates. The change in surface termination of the LaAlO3 substrate with temperature induces a change in AZO film orientation. The anisotropic nature of electrical conductivity and Seebeck coefficient of the AZO films showed a favored thermoelectric performance in c-axis oriented films. These films gave the highest power factor of 0.26 W m−1 K−1 at 740 K.

Parallel object-oriented specification language

NARCIS (Netherlands)

Florescu, O.; Voeten, J.P.M.; Theelen, B.D.; Geilen, M.C.W.; Corporaal, H.; Burns, Alan

2008-01-01

The Parallel Object-Oriented Specification Language (POOSL) is an expressive modelling language for hardware/software systems [10]. It was originally defined in [7] as an object-oriented extension of process algebra CCS [6], supporting (conditional) synchronous message passing between

Model and system learners, optimal process constructors and kinetic theory-based goal-oriented design: A new paradigm in materials and processes informatics

Science.gov (United States)

Abisset-Chavanne, Emmanuelle; Duval, Jean Louis; Cueto, Elias; Chinesta, Francisco

2018-05-01

Traditionally, Simulation-Based Engineering Sciences (SBES) has relied on the use of static data inputs (model parameters, initial or boundary conditions, … obtained from adequate experiments) to perform simulations. A new paradigm in the field of Applied Sciences and Engineering has emerged in the last decade. Dynamic Data-Driven Application Systems [9, 10, 11, 12, 22] allow the linkage of simulation tools with measurement devices for real-time control of simulations and applications, entailing the ability to dynamically incorporate additional data into an executing application, and in reverse, the ability of an application to dynamically steer the measurement process. It is in that context that traditional "digital-twins" are giving raise to a new generation of goal-oriented data-driven application systems, also known as "hybrid-twins", embracing models based on physics and models exclusively based on data adequately collected and assimilated for filling the gap between usual model predictions and measurements. Within this framework new methodologies based on model learners, machine learning and kinetic goal-oriented design are defining a new paradigm in materials, processes and systems engineering.

Adolescent Decision-Making Processes regarding University Entry: A Model Incorporating Cultural Orientation, Motivation and Occupational Variables

Science.gov (United States)

Jung, Jae Yup

2013-01-01

This study tested a newly developed model of the cognitive decision-making processes of senior high school students related to university entry. The model incorporated variables derived from motivation theory (i.e. expectancy-value theory and the theory of reasoned action), literature on cultural orientation and occupational considerations. A…

Analysis and design of the SI-simulator software system for the VHTR-SI process by using the object-oriented analysis and object-oriented design methodology

International Nuclear Information System (INIS)

Chang, Jiwoon; Shin, Youngjoon; Kim, Jihwan; Lee, Kiyoung; Lee, Wonjae; Chang, Jonghwa; Youn, Cheung

2008-01-01

The SI-simulator is an application software system that simulates the dynamic behavior of the VHTR-SI process by the use of mathematical models. Object-oriented analysis (OOA) and object-oriented design (OOD) methodologies were employed for the SI simulator system development. OOA is concerned with developing software engineering requirements and specifications that are expressed as a system's object model (which is composed of a population of interacting objects), as opposed to the traditional data or functional views of systems. OOD techniques are useful for the development of large complex systems. Also, OOA/OOD methodology is usually employed to maximize the reusability and extensibility of a software system. In this paper, we present a design feature for the SI simulator software system by the using methodologies of OOA and OOD

Radiographic film orientation in radiotherapy dosimetry

International Nuclear Information System (INIS)

Suchowerska, N.; Davison, A.; Drew, J.; Metcalfe, P.

1996-01-01

Since the discovery of x-rays, film has been used as a detection medium for radiation. More recently radiographic film has become established as a practical tool for the measurement of dose distribution in radiotherapy. The accuracy and reproducibility of film dosimetry depends on photon energy, processing conditions and film plane orientation. The relationship between photon energy, processing conditions and film dosimetry accuracy has been studied. The role of film plane orientation is still controversial. The current work aims to clarify the effects film plane orientation has on film dosimetry. Poster 205. (author)

The Effect of Process Oriented Writing Activities on the Achievement and Attitude of the Preservice Primary School Teachers: An Example of Mixed Method Study

Science.gov (United States)

Özenç, Emine Gül

2016-01-01

The purpose of this study is to find out whether process oriented writing exercises/activities have any effect on the achievement and attitude of preservice teachers as well as to set forth the opinions of primary preservice teachers on process oriented writing approach. In the research one classroom was designated as experimental group (N = 35)…

Orientation and temperature dependence of yield stress and slip geometry of Ti3Al and Ti3Al-V single crystals

International Nuclear Information System (INIS)

Umakoshi, Y.; Nakano, T.; Takenaka, T.; Sumimoto, K.; Yamane, T.

1993-01-01

Single crystals of binary Ti 3 Al and ternary Ti 3 Al-V alloys with the D0 19 structure were deformed in compression at 20-900 C. Slip systems of the (10 bar 10) -type and the (11 bar 21) -type were observed in these alloys throughout the entire temperature range depending on orientation, but the (11 bar 21) -slip was limited to orientations near [0001]. The basal (0001) -slip was also activated in quenched Ti 3 Al. The CRSS for the (10 bar 10) -slip in the binary and ternary alloys decreases monotonically with increasing temperature. In the ternary alloy the CRSS for the (10 bar 10) -slip shows a violation of Schmid's law, while the binary alloy obeys the CRSS law. When Ti 3 Al is deformed by (11 bar 21) -slip the CRSS for the slip exhibits an anomalous peak in the temperature-CRSS curve but the addition of vanadium suppresses the extent of the anomalous strengthening

Angular distribution of oriented nucleus fission neutrons

International Nuclear Information System (INIS)

Barabanov, A.L.; Grechukhin, D.P.

1982-01-01

Calculations of anisotropy of angular distribution of oriented 235 U nuclei thermal fission neutrons have been carried out. the neutrons were assumed to evaporate isotropically by completely accelerated fragements in the fragment system with only its small part, i. e. fission-producing neutrons, emitted at the moment of neck break. It has been found out that at low energies of neutrons Esub(n)=1-2 MeV the sensitivity of the angular distribution anisotropy to variations of spectrum of neutron evaporation from fragments and the magnitude of a share of fission-producing neutrons reaches approximately 100%, which at high energies, Esub(n) > 5 MeV it does not exceed approximately 20%. Therefore the angular distribution of fast neutrons to a greater degree of confidence may be used for restoring the angular distribution anisotropy of fragments while the angular distribution of low energy neutrons may be used for deriving information on the fission process, but only in case 6f the experiment accuracy is better than approximately 3%

Orienting task effects on text recall in adulthood.

Science.gov (United States)

Simon, E W; Dixon, R A; Nowak, C A; Hultsch, D F

1982-09-01

This investigation examined the effects of orienting task-controlled processing on the text recall of younger (18 to 32 years), middle-aged (39 to 51 years), and older (59 to 76 years) adults. The participants were presented with a 500-word narrative text. Three groups performed orienting tasks (syntactic, stylistic, advice) within an incidental memory paradigm. A fourth group was asked for intentional recall. Analysis indicated a significant age by orienting task interaction. Younger adults recalled more propositions when recall was intentional or when it was preceded by a deep-orienting task than when it was preceded by a shallow-orienting task. Middle-aged and older adults recalled more propositions when recall was intentional than when it was incidental, regardless of the depth of the orienting task. There were no significant differences in intentional recall. In addition, a significant age x orienting task x propositional level interaction indicated that younger adults recalled more of the main ideas of the text following deep processing, whereas the middle-aged and older adults recalled more of these ideas following intentional processing.

Sorting mutual funds with respect to process-oriented social responsibility: A FLOWSORT application

Directory of Open Access Journals (Sweden)

Tim Verheyden

2014-08-01

Full Text Available We establish a robust FLOWSORT-based tool to sort mutual funds with respect to process-oriented social responsibility and recommend the use of limiting profiles with open classes. The tool provides an alternative for the limited dichotomous classification of funds, i.e. socially responsible investing (SRI versus conventional funds. By allowing for more heterogeneity in social responsibility the sorting tool is promising for scholars to improve fund performance measurements, and useful for governments to better regulate the supply of SRI products.

The orientation distribution of tunneling-related quantities

Science.gov (United States)

Seif, W. M.; Refaie, A. I.; Botros, M. M.

2018-03-01

In the nuclear tunneling processes involving deformed nuclei, most of the tunneling-related quantities depend on the relative orientations of the participating nuclei. In the presence of different multipole deformations, we study the variation of a few relevant quantities for the α-decay and the sub-barrier fusion processes, in an orientation degree of freedom. The knocking frequency and the penetration probability are evaluated within the Wentzel-Kramers-Brillouin approximation. The interaction potential is calculated with Skyrme-type nucleon-nucleon interaction. We found that the width of the potential pocket, the Coulomb barrier radius, the penetration probability, the α-decay width, and the fusion cross-section follow consistently the orientation-angle variation of the radius of the deformed nucleus. The orientation distribution patterns of the pocket width, the barrier radius, the logarithms of the penetrability, the decay width, and the fusion cross-section are found to be highly analogous to pattern of the deformed-nucleus radius. The curve patterns of the orientation angle distributions of the internal pocket depth, the Coulomb barrier height and width, as well as the knocking frequency simulate inversely the variation of the deformed nucleus radius. The predicted orientation behaviors will be of a special interest in predicting the optimum orientations for the tunneling processes.

Job Oriented Training ’Lessons Learned’

Science.gov (United States)

2008-11-01

Job Oriented Training ’Lessons Learned’ Job Oriented Training (JOT), een vorm van trainen waarbij de cursist zelfstandig, zonder theorie vooraf...39 77 lnfo-DenV@tno.nl TNO-rapportnummer TNO-DV 2008 A447 Opdrachtnummer Datum november 2008 Auteur (s) drs. H.E. Stubbe dr. A.H. van der...onderlinge discussie over achterliggende overwegingen te stimuleren. Zij hebben op dat moment nog geen theorie aangeboden gekregen en zijn niet op de hoogte

Orientation acoustic radiation of electrons in silicon thick crystal

International Nuclear Information System (INIS)

Alejnik, A.N.; Afanas'ev, S.G.; Vorob'ev, S.A.; Zabaev, V.N.; Il'in, S.I.; Kalinin, B.N.; Potylitsyn, A.P.

1989-01-01

Results of measuring orientation acoustic radiation of 900 and 500 MeV electrons during their movement along crystallographic axis in thick silicon crystal (h=20 mm thickness) are presented for the first time. Analysis of obtained results shows that dynamic mechanism describes rather completely the main regularities of orientation dependence of the amplitude of acoustic signal occuring under electron motion near crystallographic axis of the crystal. Phenomena of orientation acoustic radiation can be also used for investigation of solid bodies. Orientation both of thin and rather thick monocrystals can be conducted on the basis of dynamic mechanism of elastic wave excitation in crystals

The capacity limitations of orientation summary statistics

Science.gov (United States)

Attarha, Mouna; Moore, Cathleen M.

2015-01-01

The simultaneous–sequential method was used to test the processing capacity of establishing mean orientation summaries. Four clusters of oriented Gabor patches were presented in the peripheral visual field. One of the clusters had a mean orientation that was tilted either left or right while the mean orientations of the other three clusters were roughly vertical. All four clusters were presented at the same time in the simultaneous condition whereas the clusters appeared in temporal subsets of two in the sequential condition. Performance was lower when the means of all four clusters had to be processed concurrently than when only two had to be processed in the same amount of time. The advantage for establishing fewer summaries at a given time indicates that the processing of mean orientation engages limited-capacity processes (Experiment 1). This limitation cannot be attributed to crowding, low target-distractor discriminability, or a limited-capacity comparison process (Experiments 2 and 3). In contrast to the limitations of establishing multiple summary representations, establishing a single summary representation unfolds without interference (Experiment 4). When interpreted in the context of recent work on the capacity of summary statistics, these findings encourage reevaluation of the view that early visual perception consists of summary statistic representations that unfold independently across multiple areas of the visual field. PMID:25810160

Parallel-hierarchical processing and classification of laser beam profile images based on the GPU-oriented architecture

Science.gov (United States)

Yarovyi, Andrii A.; Timchenko, Leonid I.; Kozhemiako, Volodymyr P.; Kokriatskaia, Nataliya I.; Hamdi, Rami R.; Savchuk, Tamara O.; Kulyk, Oleksandr O.; Surtel, Wojciech; Amirgaliyev, Yedilkhan; Kashaganova, Gulzhan

2017-08-01

The paper deals with a problem of insufficient productivity of existing computer means for large image processing, which do not meet modern requirements posed by resource-intensive computing tasks of laser beam profiling. The research concentrated on one of the profiling problems, namely, real-time processing of spot images of the laser beam profile. Development of a theory of parallel-hierarchic transformation allowed to produce models for high-performance parallel-hierarchical processes, as well as algorithms and software for their implementation based on the GPU-oriented architecture using GPGPU technologies. The analyzed performance of suggested computerized tools for processing and classification of laser beam profile images allows to perform real-time processing of dynamic images of various sizes.

Effect of crystallographic orientation on the anodic formation of nanoscale pores/tubes in TiO 2 films

Science.gov (United States)

Kalantar-zadeh, K.; Sadek, A. Z.; Zheng, H.; Partridge, J. G.; McCulloch, D. G.; Li, Y. X.; Yu, X. F.; Wlodarski, W.

2009-10-01

Self-organized nanopores and nanotubes have been produced in thin films of titanium (Ti) prepared using filtered cathodic vacuum arc (FCVA), DC- and RF-sputter deposition systems. The anodization process was performed using a neutral electrolyte containing fluoride ions with an applied potential between 2 and 20 V (for clarity the results are only presented for 5 V). Scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques were used to characterise the films. It was found that the crystallographic orientation of the Ti films played a significant role in determining whether pores or tubes were formed during the anodic etching process.

Habituation of the orienting reflex and the development of Preliminary Process Theory.

Science.gov (United States)

Barry, Robert J

2009-09-01

The orienting reflex (OR), elicited by an innocuous stimulus, can be regarded as a model of the organism's interaction with its environment, and has been described as the unit of attentional processing. A major determinant of the OR is the novelty of the eliciting stimulus, generally operationalized in terms of its reduction with stimulus repetition, the effects of which are commonly described in habituation terms. This paper provides an overview of a research programme, spanning more than 30 years, investigating psychophysiological aspects of the OR in humans. The major complication in this research is that the numerous physiological measures used as dependent variables in the OR context fail to jointly covary with stimulus parameters. This has led to the development of the Preliminary Process Theory (PPT) of the OR to accommodate the complexity of the observed stimulus-response patterns. PPT is largely grounded in autonomic measures, and current work is attempting to integrate electroencephalographic measures, particularly components in the event-related brain potentials reflecting aspects of stimulus processing. The emphasis in the current presentation is on the use of the defining criteria of the habituation phenomenon, and Groves and Thompson's Dual-process Theory, in the development of PPT.

Low-temperature nuclear orientation

International Nuclear Information System (INIS)

Stone, N.J.; Postma, H.

1986-01-01

This book comprehensively surveys the many aspects of the low temperature nuclear orientation method. The angular distribution of radioactive emissions from nuclei oriented by hyperfine interactions in solids, is treated experimentally and theoretically. A general introductory chapter is followed by formal development of the theory of the orientation process and the anisotropic emission of decay products from oriented nuclei, applied to radioactive decay and to reactions. Five chapters on applications to nuclear physics cover experimental studies of alpha, beta and gamma emission, nuclear moment measurement and level structure information. Nuclear orientation studies of parity non-conservation and time reversal asymmetry are fully described. Seven chapters cover aspects of hyperfine interactions, magnetic and electric, in metals, alloys and insulating crystals, including ordered systems. Relaxation phenomena and the combined technique of NMR detection using oriented nuclei are treated at length. Chapters on the major recent development of on-line facilities, giving access to short lived nuclei far from stability, on the use of nuclear orientation for thermometry below 1 Kelvin and on technical aspects of the method complete the main text. Extensive appendices, table of relevant parameters and over 1000 references are included to assist the design of future experiments. (Auth.)

The forming of valuable orientations in the process of physical up-bringing

Directory of Open Access Journals (Sweden)

Bezverhnya G.V.

2010-01-01

Full Text Available In the article we consider the impact of physical education as an academic subject in the formation of value orientations of students. Value orientations are formed in the face of social experience and reflects in aims, beliefs, ideals, interests. Therefore, special attention should be paid to in fluences on values orientations formation mechanisms to solve the motivational impact on the consciousness and behavior of the individual, the system of education and training. The development of physical culture values enables a young person to understand the complexity of life, to form physical and spiritual potential. Practical application of research, value orientations in the field of physical culture has an important achievement of the aims in the future professional activity.

Excimer laser processing of Ti-6Al-4V

International Nuclear Information System (INIS)

Folkes, J.A.; Shibata, K.

1994-01-01

The effect of the excimer laser on the surface of Ti-6Al-4V is reported. Particular concentration is given to surface modification for potential materials processing applications. Results showed that: (1) there is an optimum energy for smoothing titanium; (2) at this energy density increasing the number of pulses has some, but not a significant, effect on the smoothing process; and (3) relatively smooth surfaces could be achieved at higher energy densities if the sample was processed in a helium atmosphere. Other typical surface modifications and features are also reported, including the effect of different gases on the process

Non-invasive quality evaluation of confluent cells by image-based orientation heterogeneity analysis.

Science.gov (United States)

Sasaki, Kei; Sasaki, Hiroto; Takahashi, Atsuki; Kang, Siu; Yuasa, Tetsuya; Kato, Ryuji

2016-02-01

In recent years, cell and tissue therapy in regenerative medicine have advanced rapidly towards commercialization. However, conventional invasive cell quality assessment is incompatible with direct evaluation of the cells produced for such therapies, especially in the case of regenerative medicine products. Our group has demonstrated the potential of quantitative assessment of cell quality, using information obtained from cell images, for non-invasive real-time evaluation of regenerative medicine products. However, image of cells in the confluent state are often difficult to evaluate, because accurate recognition of cells is technically difficult and the morphological features of confluent cells are non-characteristic. To overcome these challenges, we developed a new image-processing algorithm, heterogeneity of orientation (H-Orient) processing, to describe the heterogeneous density of cells in the confluent state. In this algorithm, we introduced a Hessian calculation that converts pixel intensity data to orientation data and a statistical profiling calculation that evaluates the heterogeneity of orientations within an image, generating novel parameters that yield a quantitative profile of an image. Using such parameters, we tested the algorithm's performance in discriminating different qualities of cellular images with three types of clinically important cell quality check (QC) models: remaining lifespan check (QC1), manipulation error check (QC2), and differentiation potential check (QC3). Our results show that our orientation analysis algorithm could predict with high accuracy the outcomes of all types of cellular quality checks (>84% average accuracy with cross-validation). Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

Science.gov (United States)

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.; Kang, In-Sik; Maloney, Eric; Waliser, Duane; Hendon, Harry

2017-12-01

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJO amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep convection.

Students' Attitudes, Self-Efficacy and Experiences in a Modified Process-Oriented Guided Inquiry Learning Undergraduate Chemistry Classroom

Science.gov (United States)

Vishnumolakala, Venkat Rao; Southam, Daniel C.; Treagust, David F.; Mocerino, Mauro; Qureshi, Sheila

2017-01-01

This one-semester, mixed methods study underpinning social cognition and theory of planned behaviour investigated the attitudes, self-efficacy, and experiences of 559 first year undergraduate chemistry students from two cohorts in modified process-oriented guided inquiry learning (POGIL) classes. Versions of attitude toward the study of chemistry…

Market-oriented search in differentiated industries

DEFF Research Database (Denmark)

Sørensen, Hans Eibe; Stieglitz, Nils

2009-01-01

  How is the success of a firm's market-oriented activities influenced by the marketing mix? This paper contributes to existing marketing research by advancing our understanding of the process by which market orientation transforms into superior performance. This process is investigated...... on the basis of appropriate organizational search models drawn from the behavioral theory of the firm. Specifically, we draw on the NK model to develop testable propositions that substantiate and extend prior theoretical market orientation research. Our results provide new insight into organizational...... characteristics and consequences of responsive and proactive marketing behaviors, as well as the allocation of attention towards customers and competitors....

Processive nicking activity of T4 endonuclease V on UV-irradiated chromatin

International Nuclear Information System (INIS)

Gruskin, E.A.; Lloyd, R.S.

1986-01-01

T4 endonuclease V initiates the excision repair of pyrimidine dimers in UV-irradiated T4 infected E. coli cells. The pyrimidine dimer specific nicking activity of T4 endonuclease V functions by a processive scanning on UV-irradiated DNA. Previously it has been demonstrated that introduction of endonuclease V into repair-deficient human cells causes a restoration of UV survival in these cells. This demonstrates that endonuclease V is competent to incise mammalian DNA at the site of pyrimidine dimers. In order to assess the ability of endonuclease V to act processively on DNA associated as chromatin, minichromosomes were prepared for use as a substrate. Form I DNA was reconstituted with H3, H4 +/- H1 histones by sequential dialysis steps from 2.0 M NaCl to 50 mM NaCl. Time course reactions were performed with minichromosomes containing 10 and 25 dimers per molecule. In each case the rate of disappearance of form I DNA which was associated as chromatin was decreased relative to that of naked form I DNA. Concurrent with that observation, the rate and extent of appearance of form III DNA was increased with the DNA in minichromosomes relative to naked DNA. This is diagnostic of an enhancement of processivity. The inclusion of H1 in the minichromosomes resulted in a slight additional increase in processivity relative to minichromosomes consisting only of H3 and H4

Orientation Mapping of Extruded Polymeric Composites by Polarized Micro-Raman Spectroscopy

Directory of Open Access Journals (Sweden)

Xiaoyun Chen

2015-01-01

Full Text Available Molecular orientation has a strong influence on polymeric composite materials’ mechanical properties. In this paper we describe the use of polarized micro-Raman spectroscopy as a powerful tool to map out the molecular orientation of a uniaxially oriented polypropylene- (PP- based composite material. Initial samples exhibited a high degree of surface fibrillation upon cutting. Raman spectroscopy was used to characterize the degree of orientation in the skin and guide the development of the posttreatment process to optimize the skin relaxation while maintaining the high degree of orientation in the rest of the board. The PP oriented polymer composite (OPC was oriented through an extrusion process and its surface was then treated to achieve relaxation. Micro-Raman analysis at the surface region demonstrated the surface orientation relaxation, and the results provide an effective way to correlate the extent of relaxation and process conditions. Larger scale orientation mapping was also carried out over the entire cross-section (12.7 cm × 2.54 cm. The results agree well with prior expectation of the molecular orientation based on the extrusion and subsequent quenching process. The methodologies described here can be readily applied to other polymeric systems.

Microstructure of Ti-6Al-4V produced by selective laser melting

International Nuclear Information System (INIS)

Simonelli, M; Tse, Y Y; Tuck, C

2012-01-01

Ti-6Al-4V is the most widely used titanium alloy. Manufacturing of Ti-6Al-4V components using novel additive processing techniques such as selective laser melting is of great interest. This study focuses on the microstructure characterisation of Ti-6Al-4V components produced by selective laser melting (SLM) with full (Ti-6Al-4V base plate) and partial (Ti-6Al-4V needle-shaped bed) support. The starting material, a plasma atomised powder, and the component products are studied using various microscopy techniques including optical, scanning electron and transmission electron microscopy and electron backscattered diffraction (EBSD). Powder particles are fully dense, possess a spherical shape and are composed of acicular α phase. The as-built material shows oriented acicular martensitic phase with well defined columnar grains. The morphology of martensitic phase and microstructural evolution will be discussed in relation to the SLM processing parameters employed and the different cooling rates experienced by the components.

The Process-Oriented Simulation (POS) model for common cause failures: recent progress

International Nuclear Information System (INIS)

Berg, H.P.; Goertz, R.; Schimetschka, E.; Kesten, J.

2006-01-01

A common-cause failure (CCF) model based on stochastic simulation has been developed to complement the established approaches and to overcome some of their shortcomings. Reflecting the models proximity to the CCF process it was called Process Oriented Simulation (POS) Model. In recent years, some progress has been made to render the POS model fit for practical applications comprising the development of parameter estimates and a number of test applications in areas where results were already available - especially from CCF benchmarks - and comparison can provide insights in strong and weak points of the different approaches. In this paper, a detailed description of the POS model is provided together with the approach to parameter estimation and representative test applications. It is concluded, that the POS model has a number of strengths - especially the feature to provide reasonable extrapolation to CCF groups with high degrees of redundancy - and thus a considerable potential to complement the insights obtained from existing modeling. (orig.)

The professional’s orientation in the formative process for the bachelor’s general united students

Directory of Open Access Journals (Sweden)

Darwin Stalin Faz-Delgado

2016-11-01

Full Text Available In Ecuador Primary Education has as goal to develop the abilities, skills and linguistic competence in children and teenagers from 5 years old until they arrive to High School degree.  High School main objective is to provide to students a general and an interdisciplinary preparation that guide them to elaborate their life projects in order that they can fit in societyas responsible, critical and solidary human beings. It also has as intention to develop students’ abilities in knowledge acquisition and citizen competence and to prepare them to work, to learn and to access to University; this aspect establishes the importance of an adequate professional orientation that facilitates the conscious selection of their future profession and career. This article contains theoretical basis of process the formation and professional’s orientation in the High School, for the attention on the context of the Ecuador people.

The Effect of Process Oriented Guided Inquiry Learning (POGIL) on 11th Graders' Conceptual Understanding of Electrochemistry

Science.gov (United States)

Sen, Senol; Yilmaz, Ayhan; Geban, Ömer

2016-01-01

The purpose of this study was to investigate the effect of Process Oriented Guided Inquiry Learning (POGIL) method compared to traditional teaching method on 11th grade students' conceptual understanding of electrochemistry concepts. Participants were 115 students from a public school in Turkey. Nonequivalent control group design was used. Two…

Electrodeposited copper oxide films: Effect of bath pH on grain orientation and orientation-dependent interfacial behavior

International Nuclear Information System (INIS)

Wang, L.C.; Tacconi, N.R. de; Chenthamarakshan, C.R.; Rajeshwar, K.; Tao, M.

2007-01-01

Copper (I) oxide (Cu 2 O) films were cathodically electrodeposited on Sn-doped indium oxide substrates. The influence of electrodeposition bath pH on grain orientation and crystallite shape was carefully re-examined using X-ray diffraction and scanning electron microscopy. In addition to the (100) and (111) preferred orientations identified in two previous sets of studies, as the bath pH was varied in the present study from ∼ 7.5 to ∼ 12, a third preferred orientation, (110), was identified in a narrow pH range, ∼ 9.4 to ∼ 9.9. A remarkable shift in the flat-band potential (spanning ∼ 500 mV) was measured in a non-aqueous electrolyte medium for the various Cu 2 O samples obtained from baths of varying pH

Robot vision language RVL/V: An integration scheme of visual processing and manipulator control

International Nuclear Information System (INIS)

Matsushita, T.; Sato, T.; Hirai, S.

1984-01-01

RVL/V is a robot vision language designed to write a program for visual processing and manipulator control of a hand-eye system. This paper describes the design of RVL/V and the current implementation of the system. Visual processing is performed on one-dimensional range data of the object surface. Model-based instructions execute object detection, measurement and view control. The hierarchy of visual data and processing is introduced to give RVL/V generality. A new scheme to integrate visual information and manipulator control is proposed. The effectiveness of the model-based visual processing scheme based on profile data is demonstrated by a hand-eye experiment

Microstructure-grain orientation relationship in coarse grain nickel cold-rolled to large strain

International Nuclear Information System (INIS)

Chen, H.S.; Godfrey, A.; Hansen, N.; Xie, J.X.; Liu, Q.

2008-01-01

The relationship between crystallographic orientation and the deformation microstructure formed during cold-rolling to high strains (up to ε vM = 4.5) has been investigated. The starting material was Ni (99.96% purity) with a coarse initial average grain size (approximately 500 μm). Microstructural characterization was carried out using a combination of electron channeling contrast imaging and electron back-scatter diffraction orientation mapping. An orientation dependence of the deformation microstructure was observed even at the highest strain examined. A large increase in the average boundary misorientation is found at strains above ε vM = 1.8 for regions with the {1 1 2} and {1 2 3} orientations. This increase accompanies the structural transition from a medium strain microstructure to a high strain lamellar microstructure. In contrast, the average misorientation in regions of {1 1 0} orientation increases only slowly even up to the highest strain examined

Proposal of flexible atomic and molecular process management for Monte Carlo impurity transport code based on object oriented method

International Nuclear Information System (INIS)

Asano, K.; Ohno, N.; Takamura, S.

2001-01-01

Monte Carlo simulation code on impurity transport has been developed by several groups to be utilized mainly for fusion related edge plasmas. State of impurity particle is determined by atomic and molecular processes such as ionization, charge exchange in plasma. A lot of atomic and molecular processes have been considered because the edge plasma has not only impurity atoms, but also impurity molecules mainly related to chemical erosion of carbon materials, and their cross sections have been given experimentally and theoretically. We need to reveal which process is essential in a given edge plasma condition. Monte Carlo simulation code, which takes such various atomic and molecular processes into account, is necessary to investigate the behavior of impurity particle in plasmas. Usually, the impurity transport simulation code has been intended for some specific atomic and molecular processes so that the introduction of a new process forces complicated programming work. In order to evaluate various proposed atomic and molecular processes, a flexible management of atomic and molecular reaction should be established. We have developed the impurity transport simulation code based on object-oriented method. By employing object-oriented programming, we can handle each particle as 'object', which enfolds data and procedure function itself. A user (notice, not programmer) can define property of each particle species and the related atomic and molecular processes and then each 'object' is defined by analyzing this information. According to the relation among plasma particle species, objects are connected with each other and change their state by themselves. Dynamic allocation of these objects to program memory is employed to adapt for arbitrary number of species and atomic/molecular reactions. Thus we can treat arbitrary species and process starting from, for instance, methane and acetylene. Such a software procedure would be useful also for industrial application plasmas

Temperature dependence of frequency dispersion in III–V metal-oxide-semiconductor C-V and the capture/emission process of border traps

Energy Technology Data Exchange (ETDEWEB)

Vais, Abhitosh, E-mail: Abhitosh.Vais@imec.be; Martens, Koen; DeMeyer, Kristin [Department of Electrical Engineering, KU Leuven, B-3000 Leuven (Belgium); IMEC, Kapeldreef 75, B-3001 Leuven (Belgium); Lin, Han-Chung; Ivanov, Tsvetan; Collaert, Nadine; Thean, Aaron [IMEC, Kapeldreef 75, B-3001 Leuven (Belgium); Dou, Chunmeng [Frontier Research Center, Tokyo Institute of Technology, Yokohama 226-8502 (Japan); Xie, Qi; Maes, Jan [ASM International, B-3001 Leuven (Belgium); Tang, Fu; Givens, Michael [ASM International, Phoenix, Arizona 85034-7200 (United States); Raskin, Jean-Pierre [Institute of Information and Communication Technologies, Electronics and Applied Mathematics, Universiteé Catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium)

2015-08-03

This paper presents a detailed investigation of the temperature dependence of frequency dispersion observed in capacitance-voltage (C-V) measurements of III-V metal-oxide-semiconductor (MOS) devices. The dispersion in the accumulation region of the capacitance data is found to change from 4%–9% (per decade frequency) to ∼0% when the temperature is reduced from 300 K to 4 K in a wide range of MOS capacitors with different gate dielectrics and III-V substrates. We show that such significant temperature dependence of C-V frequency dispersion cannot be due to the temperature dependence of channel electrostatics, i.e., carrier density and surface potential. We also show that the temperature dependence of frequency dispersion, and hence, the capture/emission process of border traps can be modeled by a combination of tunneling and a “temperature-activated” process described by a non-radiative multi-phonon model, instead of a widely believed single-step elastic tunneling process.

Process-Oriented Guided-Inquiry Learning in an Introductory Anatomy and Physiology Course with a Diverse Student Population

Science.gov (United States)

Brown, Patrick J. P.

2010-01-01

Process-oriented guided-inquiry learning (POGIL), a pedagogical technique initially developed for college chemistry courses, has been implemented for 2 yr in a freshman-level anatomy and physiology course at a small private college. The course is populated with students with backgrounds ranging from no previous college-level science to junior and…

Rational Unified Process jako metodika vývoje softwaru

OpenAIRE

Rytíř, Vladimír

2008-01-01

Cílem této práce je seznámit se s procesem vývoje softwaru dle vybraných metodik s hlavním zaměřením na metodiku Rational Unified Process od firmy IBM. Incepční a elaborační fáze této metody také aplikuji na praktickém  příkladě. Goal of my work is to introduce software development process metods specialized to Rational Unified Process metod from IBM. I aplicate inception and elaboration phases of RUP on practical example. B

Interactions between motion and form processing in the human visual system.

Science.gov (United States)

Mather, George; Pavan, Andrea; Bellacosa Marotti, Rosilari; Campana, Gianluca; Casco, Clara

2013-01-01

The predominant view of motion and form processing in the human visual system assumes that these two attributes are handled by separate and independent modules. Motion processing involves filtering by direction-selective sensors, followed by integration to solve the aperture problem. Form processing involves filtering by orientation-selective and size-selective receptive fields, followed by integration to encode object shape. It has long been known that motion signals can influence form processing in the well-known Gestalt principle of common fate; texture elements which share a common motion property are grouped into a single contour or texture region. However, recent research in psychophysics and neuroscience indicates that the influence of form signals on motion processing is more extensive than previously thought. First, the salience and apparent direction of moving lines depends on how the local orientation and direction of motion combine to match the receptive field properties of motion-selective neurons. Second, orientation signals generated by "motion-streaks" influence motion processing; motion sensitivity, apparent direction and adaptation are affected by simultaneously present orientation signals. Third, form signals generated by human body shape influence biological motion processing, as revealed by studies using point-light motion stimuli. Thus, form-motion integration seems to occur at several different levels of cortical processing, from V1 to STS.

Analysis of microstructure and microtexture in grain-oriented electrical steel (GOES during manufacturing process

Directory of Open Access Journals (Sweden)

A. Volodarskaja

2015-10-01

Full Text Available The final Goss texture in grain-oriented electrical steels (GOES is affected by microstructure evolution and inheritance during the whole production process. This paper presents the results of detailed microtexture and microstructure investigations on GOES after the basic steps of the industrial AlN + Cu manufacturing process: hot rolling, first cold rolling + decarburization annealing, second cold rolling and final high temperature annealing. Microstructure studies showed that a copper addition to GOES affected solubility of sulphides. Copper rich sulphides dissolved during hot rolling and re-precipitated during decarburization annealing. An intensive precipitation of AlN and Si3N4 took place during decarburization annealing. No ε - Cu precipitation was detected. After high temperature annealing the misorientation of individual grains reached up to 8°.

Simulating gas-aerosol-cirrus interactions: Process-oriented microphysical model and applications

Directory of Open Access Journals (Sweden)

B. Kärcher

2003-01-01

Full Text Available This work describes a process-oriented, microphysical-chemical model to simulate the formation and evolution of aerosols and ice crystals under the conditions prevailing in the upper troposphere and lower stratosphere. The model can be run as a box model or along atmospheric trajectories, and considers mixing, gas phase chemistry of aerosol precursors, binary homogeneous aerosol nucleation, homogeneous and heterogeneous ice nucleation, coagulation, condensation and dissolution, gas retention during particle freezing, gas trapping in growing ice crystals, and reverse processes. Chemical equations are solved iteratively using a second order implicit integration method. Gas-particle interactions and coagulation are treated over various size structures, with fully mass conserving and non-iterative numerical solution schemes. Particle types include quinternary aqueous solutions composed of H2SO4, HNO3, HCl, and HBr with and without insoluble components, insoluble aerosol particles, and spherical or columnar ice crystals deriving from each aerosol type separately. Three case studies are discussed in detail to demonstrate the potential of the model to simulate real atmospheric processes and to highlight current research topics concerning aerosol and cirrus formation near the tropopause. Emphasis is placed on how the formation of cirrus clouds and the scavenging of nitric acid in cirrus depends on small-scale temperature fluctuations and the presence of efficient ice nuclei in the tropopause region, corroborating and partly extending the findings of previous studies.

The level of spatial orientation of basketball players aged 14 years

Directory of Open Access Journals (Sweden)

Pomeschikova I. P.

2012-03-01

Full Text Available The article studies the performance level of the spatial orientation of the basketball teams' pre-basic training, which was determined by standard methods. The study involved 12 athletes for 14 years with four years basketball. Teacher testing conducted to determine the allowed level of basketball and to determine the spatial relationship between the rates of the various manifestations of this ability. The level of spatial orientation of sportsmen evaluated according to the 8 test, methodology suggested V.A. Romanenko, L.P. Sergienko, V.I. Lyakh.

Automatic optimisation of beam orientations using the simplex algorithm and optimisation of quality control using statistical process control (S.P.C.) for intensity modulated radiation therapy (I.M.R.T.)

International Nuclear Information System (INIS)

Gerard, K.

2008-11-01

Intensity Modulated Radiation Therapy (I.M.R.T.) is currently considered as a technique of choice to increase the local control of the tumour while reducing the dose to surrounding organs at risk. However, its routine clinical implementation is partially held back by the excessive amount of work required to prepare the patient treatment. In order to increase the efficiency of the treatment preparation, two axes of work have been defined. The first axis concerned the automatic optimisation of beam orientations. We integrated the simplex algorithm in the treatment planning system. Starting from the dosimetric objectives set by the user, it can automatically determine the optimal beam orientations that best cover the target volume while sparing organs at risk. In addition to time sparing, the simplex results of three patients with a cancer of the oropharynx, showed that the quality of the plan is also increased compared to a manual beam selection. Indeed, for an equivalent or even a better target coverage, it reduces the dose received by the organs at risk. The second axis of work concerned the optimisation of pre-treatment quality control. We used an industrial method: Statistical Process Control (S.P.C.) to retrospectively analyse the absolute dose quality control results performed using an ionisation chamber at Centre Alexis Vautrin (C.A.V.). This study showed that S.P.C. is an efficient method to reinforce treatment security using control charts. It also showed that our dose delivery process was stable and statistically capable for prostate treatments, which implies that a reduction of the number of controls can be considered for this type of treatment at the C.A.V.. (author)

Improving intensity-modulated radiation therapy using the anatomic beam orientation optimization algorithm

International Nuclear Information System (INIS)

Potrebko, Peter S.; McCurdy, Boyd M. C.; Butler, James B.; El-Gubtan, Adel S.

2008-01-01

A novel, anatomic beam orientation optimization (A-BOO) algorithm is proposed to significantly improve conventional intensity-modulated radiation therapy (IMRT). The A-BOO algorithm vectorially analyses polygonal surface mesh data of contoured patient anatomy. Five optimal (5-opt) deliverable beam orientations are selected based on (1) tangential orientation bisecting the target and adjacent organ's-at-risk (OARs) to produce precipitous dose gradients between them and (2) parallel incidence with polygon features of the target volume to facilitate conformal coverage. The 5-opt plans were compared to standard five, seven, and nine equiangular-spaced beam plans (5-equi, 7-equi, 9-equi) for: (1) gastric, (2) Radiation Therapy Oncology Group (RTOG) P-0126 prostate, and (3) RTOG H-0022 oropharyngeal (stage-III, IV) cancer patients. In the gastric case, the noncoplanar 5-opt plan reduced the right kidney V 20 Gy by 32.2%, 23.2%, and 20.6% compared to plans with five, seven, and nine equiangular-spaced beams. In the prostate case, the coplanar 5-opt plan produced similar rectal sparing as the 7-equi and 9-equi plans with a reduction of the V 75, V 70, V 65, and V 60 Gy of 2.4%, 5.3%, 7.0%, and 9.5% compared to the 5-equi plan. In the stage-III and IV oropharyngeal cases, the noncoplanar 5-opt plan substantially reduced the V 30 Gy and mean dose to the contralateral parotid compared to plans with five, seven, and nine equiangular-spaced beams: (stage-III) 7.1%, 5.2%, 6.8%, and 5.1, 3.5, 3.7 Gy and (stage-IV) 10.2%, 10.2%, 9.8% and 7.0, 7.1, 7.2 Gy. The geometry-based A-BOO algorithm has been demonstrated to be robust for application to a variety of IMRT treatment sites. Beam orientations producing significant improvements in OAR sparing over conventional IMRT can be automatically produced in minutes compared to hours with existing dose-based beam orientation optimization methods

Numerical Simulation of Shear Slitting Process of Grain Oriented Silicon Steel using SPH Method

Directory of Open Access Journals (Sweden)

Bohdal Łukasz

2017-12-01

Full Text Available Mechanical cutting allows separating of sheet material at low cost and therefore remains the most popular way to produce laminations for electrical machines and transformers. However, recent investigations revealed the deteriorating effect of cutting on the magnetic properties of the material close to the cut edge. The deformations generate elastic stresses in zones adjacent to the area of plastically deformed and strongly affect the magnetic properties. The knowledge about residual stresses is necessary in designing the process. This paper presents the new apprach of modeling residual stresses induced in shear slitting of grain oriented electrical steel using mesh-free method. The applications of SPH (Smoothed Particle Hydrodynamics methodology to the simulation and analysis of 3D shear slitting process is presented. In experimental studies, an advanced vision-based technology based on digital image correlation (DIC for monitoring the cutting process is used.

Characterization of 10 MeV electron linac for radiation processing

International Nuclear Information System (INIS)

Petwal, V.C.; Rao, J.N.; Kaul, A.; Bapna, S.C.; Mulchandani, J.K.; Wanmode, Y.; Pandiyar, M.; Srivastava, P.; Jain, Akhilesh; Hanurkar, P.R.

2006-01-01

A radiation processing facility based on a 10 MeV LINAC is being set-up at RRCAT. In the course of commissioning various experiments have been carried-out to characterize the radiation field generated by the accelerator and subsequently to derive the operating parameters of the facility for radiation processing of various items. Results of the experiments are presented in the paper. (author)

Dimension university through the process universalization. Experiences Universidad de Oriente and its impact on territories

Directory of Open Access Journals (Sweden)

Rosalía Díaz-Suárez

2016-09-01

Full Text Available The universalization has implied one of the most dynamic and massive transformations in the Cuban higher education, its impact in the local development has contributed to create the  values in each territory. The experiences of the University of Oriente have been important in this great task of formation and professionals’ studies that transcends the academy and involves cultural, educational, administrative, scientific institutions, social organizations and the communities. Recognizing the work undertaken with this process for ten years, by means of the effort of directive, professors, workers, young boys, among other that have contributed to guarantee the formation in nine careers and the faced challenges; arguments that are opportune meditations to prosecute achievements and deficiencies in a moment of maturity and improvement of the Higher Education in the municipalities. The universalization is part of the historical and cultural memory of the University of Oriente; it is an instrument of patriotic reaffirmation and identity.

Cognitive diffusion model with user-oriented context-to-text recognition for learning to promote high level cognitive processes

Directory of Open Access Journals (Sweden)

Wu-Yuin Hwang

2014-03-01

Full Text Available There is a large number of studies on how to promote students’ cognitive processes and learning achievements through various learning activities supported by advanced learning technologies. However, not many of them focus on applying the knowledge that students learn in school to solve authentic daily life problems. This study aims to propose a cognitive diffusion model called User-oriented Context-to-Text Recognition for Learning (U-CTRL to facilitate and improve students’ learning and cognitive processes from lower levels (i.e., Remember and Understand to higher levels (i.e., Apply and above through an innovative approach, called User-Oriented Context-to-Text Recognition for Learning (U-CTRL. With U-CTRL, students participate in learning activities in which they capture the learning context that can be scanned and recognized by a computer application as text. Furthermore, this study proposes the use of an innovative model, called Cognitive Diffusion Model, to investigate the diffusion and transition of students’ cognitive processes in different learning stages including pre-schooling, after-schooling, crossing the chasm, and higher cognitive processing. Finally, two cases are presented to demonstrate how the U-CTRL approach can be used to facilitate student cognition in their learning of English and Natural science.

Role of the process designer in the evolution of a technology oriented toward energy conservation

Energy Technology Data Exchange (ETDEWEB)

Cassarino, S [CONSER, Rome; Riccardi, R

1975-01-01

The increase in energy costs has introduced new stringent boundaries to process engineering, involving the need for more and more advanced calculation techniques and a greater accountability on the part of the process designer for the purposes of a financially effective engineering work. The designing and optimization approaches tending to favor minimum investment decisions for the past are now subjected to a careful critical revision under the pressures of this new reality. The process designer can--through such revision process--bring a substantial contribution of his own to the development of a technology oriented toward energy conservation. In view of these considerations and on the basis of newly emerging trends, some examples are introduced to illustrate certain development opportunities in oil-refining and petrochemical industrial processes. Conventional designs covering a refining plant and an oil fractionating unit are compared in details in this review with alternative patterns to which new designing approaches are applied for the purposes of an optimized energy consumption.

Stress corrosion cracking of stainless steel under deaerated high-temperature water. Influence of cold work and processing orientation

International Nuclear Information System (INIS)

Terachi, Takumi; Yamada, Takuyo; Chiba, Goro; Arioka, Koji

2006-01-01

The influence of cold work and processing orientation on the propagation of stress corrosion cracking (SCC) of stainless steel under hydrogenated high-temperature water was examined. It was shown that (1) the crack growth rates increased with heaviness of cold work, and (2) processing orientation affected crack growth rate with cracking direction. Crack growth rates showed anisotropy of T-L>>T-S>L-S, with T-S and L-S branches representing high shear stress direction. Geometric deformation of crystal grains due to cold work caused the anisotropy and shear stress also assisted the SCC propagation. (3) The step intervals of slip like patterns observed on intergranular facets increased cold work. (4) Nano-indentation hardness of the crack tip together with EBSD measurement indicated that the change of hardness due to crack propagation was less than 5% cold-work, even though the distance from the crack tip was 10μm. (author)

Thermal conductivity of solid cyclohexane in orientationally ordered and disordered phases

International Nuclear Information System (INIS)

Konstantinov, V. A.; Revyakin, V. P.; Sagan, V. V.; Pursky, O. I.; Sysoev, V. M.

2011-01-01

Thermal conductivity Λ P of solid cyclohexane is measured at a pressure P = 0.1 MPa in the temperature range from 80 K to the melting point, which covers the ranges of low-temperature orientationally ordered phase II and high-temperature orientationally disordered phase I. Thermal conductivity Λ V is measured at a constant volume in orientationally disordered phase I. The thermal conductivity measured at atmospheric pressure decreases with increasing temperature as Λ P ∝ T −1.15 in phase II, whereas Λ P ∝ T −0.3 in phase I. As temperature increases, isochoric thermal conductivity Λ V in phase I increases gradually. The experimental data are described in terms of a modified Debye model of thermal conductivity with allowance for heat transfer by both phonons and “diffuse” modes.

Development of novel control strategies for single-stage autotrophic nitrogen removal: A process oriented approach

DEFF Research Database (Denmark)

Vangsgaard, Anna Katrine; Mauricio Iglesias, Miguel; Gernaey, Krist

2014-01-01

operation and rejection of disturbances. Three novel control strategies were developed, evaluated, and benchmarked against each other: a feedforward control (control structure 1 – CS#1), a rule-based feedback control (CS#2), and a feedforward–feedback controller, in which the feedback loop updates the set......The autotrophic nitrogen removing granular sludge process is a novel and intensified process. However, its stable operation and control remain a challenging issue. In this contribution, a process oriented approach was used to develop, evaluate and benchmark novel control strategies to ensure stable...... point of the feedforward loop (CS#3). The CS#1 gave the best performance against disturbances in the ammonium concentration, whereas the CS#2 provided the best performance against disturbances in the organic carbon concentration and dynamic influent conditions. The CS#3 rejected both disturbances...

Fabrication of high permeability non-oriented electrical steels by increasing 〈0 0 1〉 recrystallization texture using compacted strip casting processes

Energy Technology Data Exchange (ETDEWEB)

Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn [State Key Laboratory of Rolling and Automation, Northeastern University, PO Box 105, Shenyang 110819 (China); Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu (China); Schneider, J. [Institut für Metallformung, Technische Universität Bergakademie Freiberg, Bernhard-von-Cotta-Str. 4, D-09596 Freiberg (Germany); Li, Hua-Long [Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu (China); Sun, Yu; Gao, Fei; Lu, Hui-Hu; Song, Hong-Yu [State Key Laboratory of Rolling and Automation, Northeastern University, PO Box 105, Shenyang 110819 (China); Li, Lei; Geng, Dian-Qiao [Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819 (China); Liu, Zhen-Yu; Wang, Guo-Dong [State Key Laboratory of Rolling and Automation, Northeastern University, PO Box 105, Shenyang 110819 (China)

2015-01-15

In this paper we will report on the application of the twin-roll casting technique to get a 2 mm thick material of Fe-3.2%Si alloy, which was finally hot rolled, cold rolled and annealed. After a mild hot rolling to a thickness of 1 mm and a mild cold rolling to a thickness of 0.35 mm, we obtained a high intensity of λ-fiber (〈0 0 1〉|| ND) and η-fiber (〈0 0 1〉|| RD) texture concentrated on cube ({0 0 1}〈0 1 0〉) component and a diminishing intensity of the γ-fiber (〈1 1 1〉|| ND) texture, and a large average grain size in the final processed material. The experimental results for the evolution of the microstructure and texture along the used processing routes were described within the paper in detail. The formation mechanism for the desired recrystallization textures were explained in terms of oriented nucleation, micro-growth selection, accumulated deformation stored energy, geometric softening and orientation pinning. It will be demonstrated that this new processing route using the compact strip casting offers the possibility to fabricate high permeability non-oriented electrical steels without additional fabrication steps like hot band annealing or two step cold rolling with intermediate annealing as in the case of conventional processing route. - Highlights: • High permeability non-oriented electrical steel was fabricated by strip casting processes. • Hot band annealing or two step cold rolling with intermediate annealing was eliminated. • Prevailing of 〈0 0 1〉|| ND and 〈0 0 1〉|| RD textures over diminishing 〈1 1 1〉|| ND texture was realized. • Evolution of microstructure and texture along the used processing routes were described.

Process and data fragmentation-oriented enterprise network integration with collaboration modelling and collaboration agents

Science.gov (United States)

Li, Qing; Wang, Ze-yuan; Cao, Zhi-chao; Du, Rui-yang; Luo, Hao

2015-08-01

With the process of globalisation and the development of management models and information technology, enterprise cooperation and collaboration has developed from intra-enterprise integration, outsourcing and inter-enterprise integration, and supply chain management, to virtual enterprises and enterprise networks. Some midfielder enterprises begin to serve for different supply chains. Therefore, they combine related supply chains into a complex enterprise network. The main challenges for enterprise network's integration and collaboration are business process and data fragmentation beyond organisational boundaries. This paper reviews the requirements of enterprise network's integration and collaboration, as well as the development of new information technologies. Based on service-oriented architecture (SOA), collaboration modelling and collaboration agents are introduced to solve problems of collaborative management for service convergence under the condition of process and data fragmentation. A model-driven methodology is developed to design and deploy the integrating framework. An industrial experiment is designed and implemented to illustrate the usage of developed technologies in this paper.

Brain system for mental orientation in space, time, and person.

Science.gov (United States)

Peer, Michael; Salomon, Roy; Goldberg, Ilan; Blanke, Olaf; Arzy, Shahar

2015-09-01

Orientation is a fundamental mental function that processes the relations between the behaving self to space (places), time (events), and person (people). Behavioral and neuroimaging studies have hinted at interrelations between processing of these three domains. To unravel the neurocognitive basis of orientation, we used high-resolution 7T functional MRI as 16 subjects compared their subjective distance to different places, events, or people. Analysis at the individual-subject level revealed cortical activation related to orientation in space, time, and person in a precisely localized set of structures in the precuneus, inferior parietal, and medial frontal cortex. Comparison of orientation domains revealed a consistent order of cortical activity inside the precuneus and inferior parietal lobes, with space orientation activating posterior regions, followed anteriorly by person and then time. Core regions at the precuneus and inferior parietal lobe were activated for multiple orientation domains, suggesting also common processing for orientation across domains. The medial prefrontal cortex showed a posterior activation for time and anterior for person. Finally, the default-mode network, identified in a separate resting-state scan, was active for all orientation domains and overlapped mostly with person-orientation regions. These findings suggest that mental orientation in space, time, and person is managed by a specific brain system with a highly ordered internal organization, closely related to the default-mode network.

On Converting Software Systems to Object Oriented Architectures

Directory of Open Access Journals (Sweden)

Gabriela Czibula

2010-06-01

Full Text Available Object-oriented concepts are useful concerning the reuse of existing software. Therefore a transformation of procedural programs to objectoriented architectures becomes an important process to enhance the reuse of procedural programs. Moreover, it would be useful to assist by automatic methods the software developers in transforming procedural code into an equivalent
object-oriented one. In this paper we aim at introducing a hierarchical clustering algorithm that can be used for assisting software developers in the process of transforming procedural code into an object-oriented architecture.

Fast coding of orientation in primary visual cortex.

Directory of Open Access Journals (Sweden)

Oren Shriki

Full Text Available Understanding how populations of neurons encode sensory information is a major goal of systems neuroscience. Attempts to answer this question have focused on responses measured over several hundred milliseconds, a duration much longer than that frequently used by animals to make decisions about the environment. How reliably sensory information is encoded on briefer time scales, and how best to extract this information, is unknown. Although it has been proposed that neuronal response latency provides a major cue for fast decisions in the visual system, this hypothesis has not been tested systematically and in a quantitative manner. Here we use a simple 'race to threshold' readout mechanism to quantify the information content of spike time latency of primary visual (V1 cortical cells to stimulus orientation. We find that many V1 cells show pronounced tuning of their spike latency to stimulus orientation and that almost as much information can be extracted from spike latencies as from firing rates measured over much longer durations. To extract this information, stimulus onset must be estimated accurately. We show that the responses of cells with weak tuning of spike latency can provide a reliable onset detector. We find that spike latency information can be pooled from a large neuronal population, provided that the decision threshold is scaled linearly with the population size, yielding a processing time of the order of a few tens of milliseconds. Our results provide a novel mechanism for extracting information from neuronal populations over the very brief time scales in which behavioral judgments must sometimes be made.

Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

Science.gov (United States)

Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

2018-04-01

Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

Oriental cholangiohepatitis

Energy Technology Data Exchange (ETDEWEB)

Scheible, F.W.; Davis, G.B.

1981-07-15

The recent influx of immigrants from Southeast Asia into the United States has increased the likelihood of encountering unusual diseases heretofore rarely seen in this country. Among these disorders is Oriental cholangiohepatitis, a potentially life-threatening process whose early diagnosis is facilitated by roentgenographic findings. Ultrasonography can also provide useful information, although potential pitfalls in diagnosis should be recognized.

Si exfoliation by MeV proton implantation

International Nuclear Information System (INIS)

Braley, Carole; Mazen, Frédéric; Tauzin, Aurélie; Rieutord, François; Deguet, Chrystel; Ntsoenzok, Esidor

2012-01-01

Proton implantation in silicon and subsequent annealing are widely used in the Smart Cut™ technology to transfer thin layers from a substrate to another. The low implantation energy range involved in this process is usually from a few ten to a few hundred of keV, which enables the separation of up to 2 μm thick layers. New applications in the fields of 3D integration and photovoltaic wafer manufacturing raise the demand for extending this technology to higher energy in order to separate thicker layer from a substrate. In this work, we propose to investigate the effect of proton implantation in single crystalline silicon in the 1–3 MeV range which corresponds to a 15–100 μm range for the hydrogen maximum concentration depth. We show that despites a considerably lower hydrogen concentration at R p , the layer separation is obtained with fluence close to the minimum fluence required for low energy implantation. It appears that the fracture propagation in Si and the resulting surface morphology is affected by the substrate orientation. Defects evolution is investigated with Fourier Transform Infrared Spectroscopy. The two orientations reveal similar type of defects but their evolution under annealing appears to be different.

Projectile fragmentation processes in 35-MeV/amu (α,xy) reactions

International Nuclear Information System (INIS)

Koontz, R.W.; Chang, C.C.; Holmgren, H.D.; Wu, J.R.

1979-01-01

Coincidence measurements with 35-MeV/amu α particles show that at least three projectile-fragmentation processes occur. The dominant process is ''absorptive'' breakup, where one component of the projectile interacts strongly with the target resulting in the emission of evaporation or nonstatistical particles while the other component behaves as a spectator. The other fragmentation processes which are observed account for only a few percent of the breakup cross section

Physics at a 100 TeV pp Collider: Standard Model Processes

Energy Technology Data Exchange (ETDEWEB)

Mangano, M. L. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Zanderighi, G. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Aguilar Saavedra, J. A. [Univ. of Granada (Spain); Alekhin, S. [Univ. of Hamburg (Germany). Inst. for Theoretical Physics; Inst. for High Energy Physics (IHEP), Moscow (Russian Federation); Badger, S. [Univ. of Edinburgh, Scotland (United Kingdom); Bauer, C. W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Becher, T. [Univ. Bern (Switzerland); Bertone, V. [Univ. of Oxford (United Kingdom); Bonvini, M. [Univ. of Oxford (United Kingdom); Boselli, S. [Univ. of Pavia (Italy); Bothmann, E. [Gottingen Univ. (Germany); Boughezal, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Cacciari, M. [Univ. Paris Diderot (France); Sorbonne Univ., Paris (France); Carloni Calame, C M. [Istituto Nazionale di Fisica Nucleare (INFN), Pavia (Italy); Caola, F. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Campbell, J. M. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Carrazza, S. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Chiesa, M. [Istituto Nazionale di Fisica Nucleare (INFN), Pavia (Italy); Cieri, L. [Univ. of Zurich (Switzerland); Cimaglia, F. [Univ. degli Studi di Milano (Italy); Febres Cordero, F. [Physikalisches Inst., Freiburg (Germany); Ferrarese, P. [Gottingen Univ. (Germany); D' Enterria, D. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Ferrera, G. [Univ. degli Studi di Milano (Italy); Garcia i Tormo, X. [Univ. Bern (Switzerland); Garzelli, M. V. [Univ. of Hamburg (Germany); Germann, E. [Monash Univ., Melbourne, VIC (Australia); Hirschi, V. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Han, T. [Univ. of Pittsburgh, PA (United States); Ita, H. [Physikalisches Inst., Freiburg (Germany); Jager, B. [Univ. of Tubingen (Germany); Kallweit, S. [Johannes Gutenberg Univ., Mainz (Germany); Karlberg, A. [Univ. of Oxford (United Kingdom); Kuttimalai, S. [Durham Univ. (United Kingdom); Krauss, F. [Durham Univ. (United Kingdom); Larkoski, A. J. [Harvard Univ., Cambridge, MA (United States); Lindert, J. [Univ. of Zurich (Switzerland); Luisoni, G. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Maierhofer, P. [Univ. of Freiburg (Germany); Mattelaer, O. [Durham Univ. (United Kingdom); Martinez, H. [Univ. of Pavia (Italy); Moch, S. [Univ. of Hamburg (Germany); Montagna, G. [Univ. of Pavia (Italy); Moretti, M. [Univ. of Ferrara (Italy); Nason, P. [Univ. of Milano (Italy); Nicrosini, O. [Istituto Nazionale di Fisica Nucleare (INFN), Pavia (Italy); Oleari, C. [Univ. of Milano (Italy); Pagani, D. [Univ. Catholique de Louvain (Belgium); Papaefstathiou, A. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Petriello, F. [Northwestern Univ., Evanston, IL (United States); Piccinini, F. [Istituto Nazionale di Fisica Nucleare (INFN), Pavia (Italy); Pierini, M. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Pierog, T. [Karlsruhe Inst. of Technology (KIT) (Germany); Pozzorini, S. [Univ. of Zurich (Switzerland); Re, E. [National Centre for Scientific Research (CNRS), Annecy-le-Vieux (France). Lab. of Annecy-le-Vieux for Theoretical Physics (LAPTh); Robens, T. [Technische Universitat Dresden (Germany); Rojo, J. [Univ. of Oxford (United Kingdom); Ruiz, R. [Durham Univ. (United Kingdom); Sakurai, K. [Durham Univ. (United Kingdom); Salam, G. P. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Salfelder, L. [Univ. of Tubingen (Germany); Schonherr, M. [Univ. of Ferrara (Italy); Schulze, M. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Schumann, S. [Univ. Gottingen (Germany); Selvaggi, M. [Univ. Catholique de Louvain (Belgium); Shivaji, A. [Istituto Nazionale di Fisica Nucleare (INFN), Pavia (Italy); Siodmok, A. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Polish Academy of Sciences (PAS), Krakow (Poland); Skands, P. [Monash Univ., Melbourne, VIC (Australia); Torrielli, P. [Univ. of Torino (Italy); Tramontano, F. [Univ. of Napoli (Italy); Tsinikos, I. [Univ. Catholique de Louvain (Belgium); Tweedie, B. [Univ. of Pittsburgh, PA (United States); Vicini, A. [Univ. degli Studi di Milano (Italy); Westhoff, S. [Heidelberg Univ. (Germany); Zaro, M. [Sorbonne Univ., Paris (France); Zeppenfeld, D. [Forschungszentrum Karlsruhe (Germany)

2017-06-22

This report summarises the properties of Standard Model processes at the 100 TeV pp collider. We document the production rates and typical distributions for a number of benchmark Standard Model processes, and discuss new dynamical phenomena arising at the highest energies available at this collider. We discuss the intrinsic physics interest in the measurement of these Standard Model processes, as well as their role as backgrounds for New Physics searches.

V4 AND EU INREGRATION PROCESS: THE CASE OF UKRAINE

Directory of Open Access Journals (Sweden)

Iryna APARINA

2015-09-01

Full Text Available The assistance of V4 is a very important for Ukraine. V4 countries reiterated their readiness to assist the Ukrainian authorities in preparing a comprehensive reforms package that should be at the forefront of the new government agenda. Such package should be focused on strengthening the rule of law, the efficiency of national and local governments, the transparency of public procurement, the reduction of state regulations and the fight against corruption, as well as envisaging a self-government reform that will bring the decision making process closer to the Ukrainian people. Genuinely implemented reforms, as demonstrated by V4 countries will bring the country closer to the European Union and will contribute to achieving Ukraine’s European aspirations, which are duly noted by the V4 countries. The international conference in support of Ukraine in 2015, as well as the Riga Eastern Partnership summit of 2015 represent important milestones in this respect.

Interactions between motion and form processing in the human visual system

Directory of Open Access Journals (Sweden)

George eMather

2013-05-01

Full Text Available The predominant view of motion and form processing in the human visual system assumes that these two attributes are handled by separate and independent modules. Motion processing involves filtering by direction-selective sensors, followed by integration to solve the aperture problem. Form processing involves filtering by orientation-selective and size-selective receptive fields, followed by integration to encode object shape. It has long been known that motion signals can influence form processing in the well-known Gestalt principle of common fate; texture elements which share a common motion property are grouped into a single contour or texture region. However recent research in psychophysics and neuroscience indicates that the influence of form signals on motion processing is more extensive than previously thought. First, the salience and apparent direction of moving lines depends on how the local orientation and direction of motion combine to match the receptive field properties of motion-selective neurons. Second, orientation signals generated by ‘motion-streaks’ influence motion processing; motion sensitivity, apparent direction and adaptation are affected by simultaneously present orientation signals. Third, form signals generated by human body shape influence biological motion processing, as revealed by studies using point-light motion stimuli. Thus form-motion integration seems to occur at several different levels of cortical processing, from V1 to STS.

Energy and orientation dependence of electron-irradiation-induced defects in InP

International Nuclear Information System (INIS)

Sibille, A.; Suski, J.; LeRoux, G.

1984-01-01

The concentration of several electron-irradiation-induced deep defect levels in InP has been measured by deep-level transient spectroscopy (DLTS) as a function of electron energy. The dominant centers exhibit a threshold at about 100 keV, which clearly points to a primary production event by electron--phosphorus-atom collision. This unambiguous determination allowed a test of the recently proposed orientation dependence technique to find the nature of the sublattice involved in the collision process for III-V compounds. A good quantitative agreement is obtained with a hard-sphere model for secondary collisions if disorientation of the beam in the sample is taken into account. Other traps exhibit higher thresholds which correspond either to indium-atom displacements or to the involvement of secondary collisions in the production event

Compete or Leapfrog: Creating Blue Ocean through Entrepreneurial Orientation

Directory of Open Access Journals (Sweden)

Arslan Ayub

2013-10-01

Full Text Available The study analyzes the role of entrepreneurial orientation with mediating effect of knowledge creation process to creating Blue Ocean in corporate sector in Pakistan There is an increasing competition among companies due to globalization and technological advancements. Thus, it requires a study to measure the multifaceted influence of entrepreneurial orientation on knowledge creation process and Blue Ocean besides the actual paradigm of this terminology. This concept has been well discussed in this research arena since its inception in 2005. Numerous such initiatives have already been taken, however this concept invites a lot more addition, related companies are still in pursuit to materialize the research concepts. We highlight the contingencies in the shift from a red ocean to Blue Ocean. The study uses exploratory approach; primary data is collected from 391 professionals working in different sectors of Pakistan. The study uses structural equation model (SEM technique to test the hypotheses. The study found a positive relationship between entrepreneurial orientation and Blue Ocean, entrepreneurial orientation, knowledge creation process, and Blue Ocean. The study throws light on the importance of entrepreneurial orientation and knowledge creation process to head on this fast-paced competition.

Knowledge-Centric Technical Support Organization (TSO) Using Process Oriented Knowledge Management Approach

International Nuclear Information System (INIS)

Mohamad Safuan Sulaiman; Siti Nurbahyah Hamdan; Mohd Dzul Aiman Aslan

2014-01-01

In the United States of America, Process Oriented Knowledge Management (POKM) Model has been successfully implemented in most of Nuclear Power Plants. This approach has been introduced in Nuclear Knowledge Management program by the IAEA since 2011. Malaysia has involved in the IAEA Coordinated Research Project (CRP) focusing the approach started in 2011. The main objective for Malaysian participation of this project is to support readiness in terms of nuclear technical knowledge by Technical Support Organization (TSO) for Nuclear Power Program. This project has focused on several nuclear technical areas which consist of Public Information (PI), Radiological Impact Assessment (RIA), Nuclear Reactor Technology (NRT), Plant and Prototype Development (PDC) and nuclear knowledge management. This paper articulates the detail POKM approach and project experience in implementing the approach at organizational level. (author)

Visual search of illusory contours: Shape and orientation effects

Directory of Open Access Journals (Sweden)

Gvozdenović Vasilije

2008-01-01

Full Text Available Illusory contours are specific class of visual stimuli that represent stimuli configurations perceived as integral irrespective of the fact that they are given in fragmented uncompleted wholes. Due to their specific features, illusory contours gained much attention in last decade representing prototype of stimuli used in investigations focused on binding problem. On the other side, investigations of illusory contours are related to problem of the level of their visual processing. Neurophysiologic studies show that processing of illusory contours proceed relatively early, on the V2 level, on the other hand most of experimental studies claim that illusory contours are perceived with engagement of visual attention, binding their elements to whole percept. This research is focused on two experiments in which visual search of illusory contours are based on shape and orientation. The main experimental procedure evolved the task proposed by Bravo and Nakayama where instead of detection, subjects were performing identification of one among two possible targets. In the first experiment subjects detected the presence of illusory square or illusory triangle, while in the second experiment subject were detecting two different orientations of illusory triangle. The results are interpreted in terms of visual search and feature integration theory. Beside the type of visual search task, search type proved to be dependent of specific features of illusory shapes which further complicate theoretical interpretation of the level of their perception.

Wafer-scale self-organized InP nanopillars with controlled orientation for photovoltaic devices.

Science.gov (United States)

Sanatinia, Reza; Berrier, Audrey; Dhaka, Veer; Perros, Alexander P; Huhtio, Teppo; Lipsanen, Harri; Anand, Srinivasan

2015-10-16

A unique wafer-scale self-organization process for generation of InP nanopillars is demonstrated, which is based on maskless ion-beam etching (IBE) of InP developed to obtain the nanopillars, where the height, shape, and orientation of the nanopillars can be varied by controlling the processing parameters. The fabricated InP nanopillars exhibit broadband suppression of the reflectance, 'black InP,' a property useful for solar cells. The realization of a conformal p-n junction for carrier collection, in the fabricated solar cells, is achieved by a metalorganic vapor phase epitaxy (MOVPE) overgrowth step on the fabricated pillars. The conformal overgrowth retains the broadband anti-reflection property of the InP nanopillars, indicating the feasibility of this technology for solar cells. Surface passivation of the formed InP nanopillars using sulfur-oleylamine solution resulted in improved solar-cell characteristics. An open-circuit voltage of 0.71 V and an increase of 0.13 V compared to the unpassivated device were achieved.

Wafer-scale self-organized InP nanopillars with controlled orientation for photovoltaic devices

International Nuclear Information System (INIS)

Sanatinia, Reza; Berrier, Audrey; Anand, Srinivasan; Dhaka, Veer; Perros, Alexander P; Huhtio, Teppo; Lipsanen, Harri

2015-01-01

A unique wafer-scale self-organization process for generation of InP nanopillars is demonstrated, which is based on maskless ion-beam etching (IBE) of InP developed to obtain the nanopillars, where the height, shape, and orientation of the nanopillars can be varied by controlling the processing parameters. The fabricated InP nanopillars exhibit broadband suppression of the reflectance, ‘black InP,’ a property useful for solar cells. The realization of a conformal p–n junction for carrier collection, in the fabricated solar cells, is achieved by a metalorganic vapor phase epitaxy (MOVPE) overgrowth step on the fabricated pillars. The conformal overgrowth retains the broadband anti-reflection property of the InP nanopillars, indicating the feasibility of this technology for solar cells. Surface passivation of the formed InP nanopillars using sulfur-oleylamine solution resulted in improved solar-cell characteristics. An open-circuit voltage of 0.71 V and an increase of 0.13 V compared to the unpassivated device were achieved. (paper)

Orientation aspects of growth during recrystallization

International Nuclear Information System (INIS)

Juul Jensen, D.

1997-04-01

Recrystallization of heavily cold rolled aluminium and copper is studied with the aim of achieving information about effects of crystallography orientation on the growth process. The potentials of several experimental techniques are analysed, and a method well suited for characterizing growth rates of grains with different orientations is developed. This method, which is referred to as the extended Cahn-Hagel method, is used for growth rate determinations in aluminium and copper deformed and annealed under five different conditions. In all the investigated cases, preferential growth of cube oriented grains is observed. Recrystallization models, which simulates the orientational as well as microstructural development, are described. selected models are applied for studies of recrystallization in aluminium and copper under specific deformation and annealing conditions as well as for more general studies of the effects of orientation dependent growth rates on the recrystallization microstructure and texture. Finally, reasons for the observed orientation dependent growth rates are discussed. A new mechanism, orientation pinning, is suggested and it is shown that this mechanism is necessary for the understanding of experimental results. (au) 4 tabs., 41 ills., 153 refs

Orientation aspects of growth during recrystallization

Energy Technology Data Exchange (ETDEWEB)

Juul Jensen, D.

1997-04-01

Recrystallization of heavily cold rolled aluminium and copper is studied with the aim of achieving information about effects of crystallography orientation on the growth process. The potentials of several experimental techniques are analysed, and a method well suited for characterizing growth rates of grains with different orientations is developed. This method, which is referred to as the extended Cahn-Hagel method, is used for growth rate determinations in aluminium and copper deformed and annealed under five different conditions. In all the investigated cases, preferential growth of cube oriented grains is observed. Recrystallization models, which simulates the orientational as well as microstructural development, are described. selected models are applied for studies of recrystallization in aluminium and copper under specific deformation and annealing conditions as well as for more general studies of the effects of orientation dependent growth rates on the recrystallization microstructure and texture. Finally, reasons for the observed orientation dependent growth rates are discussed. A new mechanism, orientation pinning, is suggested and it is shown that this mechanism is necessary for the understanding of experimental results. (au) 4 tabs., 41 ills., 153 refs.

A Design V and V Process of Hardwired PAMS for KJRR

International Nuclear Information System (INIS)

Jang, Gwisook; Suh, Yongsuk; Kim, Youngki

2013-01-01

A hardwired PAMS (Post Accident Monitoring System) of KJRR (KIJANG Research Reactor) provides the necessary information for operators to monitor and take actions after an accident condition. The hardwired PAMS are designed according to HSI (Human System Interface) guidelines. However the HSI guidelines are too high level requirements and do not reflect the detailed characteristics of commercial products. Thus, the system designers have a difficulty in the following how the system requirements are reflected in the actual and detailed requirements for purchase. Thus, a design V and V (Verification and Validation) of the hardwired PAMS should be specially managed and can be traceable through the entire development life cycle. Thus, this paper proposes a tracking matrix method for the design V and V of hardwired PAMS for KJRR. The PAMS of KJRR consists of hardwired indicators. There are many differences between the system requirements and procurement specifications for hardwired devices. The existing design V and V method for hardwired indicators is not clear. Thus, this paper proposed a tracking matrix for the design V and V of the hardwired PAMS

SpaceCube v2.0 Space Flight Hybrid Reconfigurable Data Processing System

Science.gov (United States)

Petrick, Dave

2014-01-01

This paper details the design architecture, design methodology, and the advantages of the SpaceCube v2.0 high performance data processing system for space applications. The purpose in building the SpaceCube v2.0 system is to create a superior high performance, reconfigurable, hybrid data processing system that can be used in a multitude of applications including those that require a radiation hardened and reliable solution. The SpaceCube v2.0 system leverages seven years of board design, avionics systems design, and space flight application experiences. This paper shows how SpaceCube v2.0 solves the increasing computing demands of space data processing applications that cannot be attained with a standalone processor approach.The main objective during the design stage is to find a good system balance between power, size, reliability, cost, and data processing capability. These design variables directly impact each other, and it is important to understand how to achieve a suitable balance. This paper will detail how these critical design factors were managed including the construction of an Engineering Model for an experiment on the International Space Station to test out design concepts. We will describe the designs for the processor card, power card, backplane, and a mission unique interface card. The mechanical design for the box will also be detailed since it is critical in meeting the stringent thermal and structural requirements imposed by the processing system. In addition, the mechanical design uses advanced thermal conduction techniques to solve the internal thermal challenges.The SpaceCube v2.0 processing system is based on an extended version of the 3U cPCI standard form factor where each card is 190mm x 100mm in size The typical power draw of the processor card is 8 to 10W and scales with application complexity. The SpaceCube v2.0 data processing card features two Xilinx Virtex-5 QV Field Programmable Gate Arrays (FPGA), eight memory modules, a monitor

Alterations to global but not local motion processing in long-term ecstasy (MDMA) users.

Science.gov (United States)

White, Claire; Brown, John; Edwards, Mark

2014-07-01

Growing evidence indicates that the main psychoactive ingredient in the illegal drug "ecstasy" (methylendioxymethamphetamine) causes reduced activity in the serotonin and gamma-aminobutyric acid (GABA) systems in humans. On the basis of substantial serotonin input to the occipital lobe, recent research investigated visual processing in long-term users and found a larger magnitude of the tilt aftereffect, interpreted to reflect broadened orientation tuning bandwidths. Further research found higher orientation discrimination thresholds and reduced long-range interactions in the primary visual area of ecstasy users. The aim of the present research was to investigate whether serotonin-mediated V1 visual processing deficits in ecstasy users extend to motion processing mechanisms. Forty-five participants (21 controls, 24 drug users) completed two psychophysical studies: A direction discrimination study directly measured local motion processing in V1, while a motion coherence task tested global motion processing in area V5/MT. "Primary" ecstasy users (n = 18), those without substantial polydrug use, had significantly lower global motion thresholds than controls [p = 0.027, Cohen's d = 0.78 (large)], indicating increased sensitivity to global motion stimuli, but no difference in local motion processing (p = 0.365). These results extend on previous research investigating the long-term effects of illicit drugs on visual processing. Two possible explanations are explored: defuse attentional processes may be facilitating spatial pooling of motion signals in users. Alternatively, it may be that a GABA-mediated disruption to V5/MT processing is reducing spatial suppression and therefore improving global motion perception in ecstasy users.

Rigorous theory of molecular orientational nonlinear optics

International Nuclear Information System (INIS)

Kwak, Chong Hoon; Kim, Gun Yeup

2015-01-01

Classical statistical mechanics of the molecular optics theory proposed by Buckingham [A. D. Buckingham and J. A. Pople, Proc. Phys. Soc. A 68, 905 (1955)] has been extended to describe the field induced molecular orientational polarization effects on nonlinear optics. In this paper, we present the generalized molecular orientational nonlinear optical processes (MONLO) through the calculation of the classical orientational averaging using the Boltzmann type time-averaged orientational interaction energy in the randomly oriented molecular system under the influence of applied electric fields. The focal points of the calculation are (1) the derivation of rigorous tensorial components of the effective molecular hyperpolarizabilities, (2) the molecular orientational polarizations and the electronic polarizations including the well-known third-order dc polarization, dc electric field induced Kerr effect (dc Kerr effect), optical Kerr effect (OKE), dc electric field induced second harmonic generation (EFISH), degenerate four wave mixing (DFWM) and third harmonic generation (THG). We also present some of the new predictive MONLO processes. For second-order MONLO, second-order optical rectification (SOR), Pockels effect and difference frequency generation (DFG) are described in terms of the anisotropic coefficients of first hyperpolarizability. And, for third-order MONLO, third-order optical rectification (TOR), dc electric field induced difference frequency generation (EFIDFG) and pump-probe transmission are presented

Working memory and decision processes in visual area V4

Directory of Open Access Journals (Sweden)

Benjamin eHayden

2013-02-01

Full Text Available Recognizing and responding to a remembered stimulus requires the coordination of perception, working memory and decision-making. To investigate the role of visual cortex in these processes, we recorded responses of single V4 neurons during performance of a delayed match-to-sample task that incorporates rapid serial visual presentation of natural images. We found that neuronal activity during the delay period after the cue but before the images depends on the identity of the remembered image and that this change persists while distractors appear. This persistent response modulation has been identified as a diagnostic criterion for putative working memory signals; our data thus suggest that working memory may involve reactivation of sensory neurons. When the remembered image reappears in the neuron’s receptive field, visually evoked responses are enhanced; this match enhancement is a diagnostic criterion for decision. One model that predicts these data is the matched filter hypothesis, which holds that during search V4 neurons change their tuning so as to match the remembered cue, and thus become detectors for that image. More generally, these results suggest that V4 neurons participate in the perceptual, working memory and decision processes that are needed to perform memory-guided decision-making.

Working memory and decision processes in visual area v4.

Science.gov (United States)

Hayden, Benjamin Y; Gallant, Jack L

2013-01-01

Recognizing and responding to a remembered stimulus requires the coordination of perception, working memory, and decision-making. To investigate the role of visual cortex in these processes, we recorded responses of single V4 neurons during performance of a delayed match-to-sample task that incorporates rapid serial visual presentation of natural images. We found that neuronal activity during the delay period after the cue but before the images depends on the identity of the remembered image and that this change persists while distractors appear. This persistent response modulation has been identified as a diagnostic criterion for putative working memory signals; our data thus suggest that working memory may involve reactivation of sensory neurons. When the remembered image reappears in the neuron's receptive field, visually evoked responses are enhanced; this match enhancement is a diagnostic criterion for decision. One model that predicts these data is the matched filter hypothesis, which holds that during search V4 neurons change their tuning so as to match the remembered cue, and thus become detectors for that image. More generally, these results suggest that V4 neurons participate in the perceptual, working memory, and decision processes that are needed to perform memory-guided decision-making.

Potential application of digital image-processing method and fitted logistic model to the control of oriental fruit moths (Grapholita molesta Busck).

Science.gov (United States)

Zhao, Z G; Rong, E H; Li, S C; Zhang, L J; Zhang, Z W; Guo, Y Q; Ma, R Y

2016-08-01

Monitoring of oriental fruit moths (Grapholita molesta Busck) is a prerequisite for its control. This study introduced a digital image-processing method and logistic model for the control of oriental fruit moths. First, five triangular sex pheromone traps were installed separately within each area of 667 m2 in a peach orchard to monitor oriental fruit moths consecutively for 3 years. Next, full view images of oriental fruit moths were collected via a digital camera and then subjected to graying, separation and morphological analysis for automatic counting using MATLAB software. Afterwards, the results of automatic counting were used for fitting a logistic model to forecast the control threshold and key control period. There was a high consistency between automatic counting and manual counting (0.99, P model, oriental fruit moths had four occurrence peaks during a year, with a time-lag of 15-18 days between adult occurrence peak and the larval damage peak. Additionally, the key control period was from 28 June to 3 July each year, when the wormy fruit rate reached up to 5% and the trapping volume was approximately 10.2 per day per trap. Additionally, the key control period for the overwintering generation was 25 April. This study provides an automatic counting method and fitted logistic model with a great potential for application to the control of oriental fruit moths.

Image processing for quantifying fracture orientation and length scale transitions during brittle deformation

Science.gov (United States)

Rizzo, R. E.; Healy, D.; Farrell, N. J.

2017-12-01

We have implemented a novel image processing tool, namely two-dimensional (2D) Morlet wavelet analysis, capable of detecting changes occurring in fracture patterns at different scales of observation, and able of recognising the dominant fracture orientations and the spatial configurations for progressively larger (or smaller) scale of analysis. Because of its inherited anisotropy, the Morlet wavelet is proved to be an excellent choice for detecting directional linear features, i.e. regions where the amplitude of the signal is regular along one direction and has sharp variation along the perpendicular direction. Performances of the Morlet wavelet are tested against the 'classic' Mexican hat wavelet, deploying a complex synthetic fracture network. When applied to a natural fracture network, formed triaxially (σ1>σ2=σ3) deforming a core sample of the Hopeman sandstone, the combination of 2D Morlet wavelet and wavelet coefficient maps allows for the detection of characteristic scale orientation and length transitions, associated with the shifts from distributed damage to the growth of localised macroscopic shear fracture. A complementary outcome arises from the wavelet coefficient maps produced by increasing the wavelet scale parameter. These maps can be used to chart the variations in the spatial distribution of the analysed entities, meaning that it is possible to retrieve information on the density of fracture patterns at specific length scales during deformation.

Orientation of llama antibodies strongly increases sensitivity of biosensors.

Science.gov (United States)

Trilling, Anke K; Hesselink, Thamara; van Houwelingen, Adèle; Cordewener, Jan H G; Jongsma, Maarten A; Schoffelen, Sanne; van Hest, Jan C M; Zuilhof, Han; Beekwilder, Jules

2014-10-15

Sensitivity of biosensors depends on the orientation of bio-receptors on the sensor surface. The objective of this study was to organize bio-receptors on surfaces in a way that their analyte binding site is exposed to the analyte solution. VHH proteins recognizing foot-and-mouth disease virus (FMDV) were used for making biosensors, and azides were introduced in the VHH to function as bioorthogonal reactive groups. The importance of the orientation of bio-receptors was addressed by comparing sensors with randomly oriented VHH (with multiple exposed azide groups) to sensors with uniformly oriented VHH (with only a single azide group). A surface plasmon resonance (SPR) chip exposing cyclooctyne was reacted to azide functionalized VHH domains, using click chemistry. Comparison between randomly and uniformly oriented bio-receptors showed up to 800-fold increase in biosensor sensitivity. This technique may increase the containment of infectious diseases such as FMDV as its strongly enhanced sensitivity may facilitate early diagnostics. Copyright © 2014 Elsevier B.V. All rights reserved.

Photostop of iodine atoms from electrically oriented ICl molecules

International Nuclear Information System (INIS)

Bao Da-Xiao; Lian-Zhong Deng; Xu Liang; Yin Jian-Ping

2015-01-01

The dynamics of photostopping iodine atoms from electrically oriented ICl molecules was numerically studied based on their orientational probability distribution functions. Velocity distributions of the iodine atoms and their production rates were investigated for orienting electrical fields of various intensities. For the ICl precursor beams with an initial rotational temperature of ∼ 1 K, the production of the iodine atoms near zero speed will be improved by about ∼ 5 times when an orienting electrical field of ∼ 200 kV/cm is present. A production rate of ∼ 0.5‰ is obtained for photostopped iodine atoms with speeds less than 10 m/s, which are suitable for magnetic trapping. The electrical orientation of ICl precursors and magnetic trapping of photostopped iodine atoms in situ can be conveniently realized with a pair of charged ring magnets. With the maximal value of the trapping field being ∼ 0.28 T, the largest trapping speed is ∼ 7.0 m/s for the iodine atom. (paper)

Anisotropy and relaxation processes of uniaxially oriented CoFe2O4 nanoparticles dispersed in PDMS

International Nuclear Information System (INIS)

Antonel, P.S.; Negri, R.M.; Leyva, A.G.; Jorge, G.A.

2012-01-01

When a uniaxial magnetic field is applied to a non-magnetic dispersive medium filled with magnetic nanoparticles, they auto-assemble into thin needles parallel to the field direction, due to the strong dipolar interaction among them. We have prepared in this way magnetically oriented nanocomposites of nanometer-size CoFe 2 O 4 particles in a polydimethylsiloxane polymer matrix, with 10% w/w of magnetic particles. We present the characteristic magnetic relaxation curves measured after the application of a magnetic field forming an angle α with respect to the needle direction. We show that the magnetic viscosity (calculated from the logarithmic relaxation curves) as a function of α presents a minimum at α=0, indicating slower relaxation processes associated with this configuration of fields. The results seems to point out that the local magnetic anisotropy of the nanoparticles is oriented along the needles, resulting in the macroscopic magnetic anisotropy observed in our measurements.

Laser Controlled Molecular Orientation Dynamics

International Nuclear Information System (INIS)

Atabek, O.

2004-01-01

Molecular orientation is a challenging control issue covering a wide range of applications from reactive collisions, high order harmonic generation, surface processing and catalysis, to nanotechnologies. The laser control scenario rests on the following three steps: (i) depict some basic mechanisms producing dynamical orientation; (ii) use them both as computational and interpretative tools in optimal control schemes involving genetic algorithms; (iii) apply what is learnt from optimal control to improve the basic mechanisms. The existence of a target molecular rotational state combining the advantages of efficient and post-pulse long duration orientation is shown. A strategy is developed for reaching such a target in terms of a train of successive short laser pulses applied at predicted time intervals. Each individual pulse imparts a kick to the molecule which orients. Transposition of such strategies to generic systems is now under investigation

Oriental cholangiohepatitis

International Nuclear Information System (INIS)

Scheible, F.W.; Davis, G.B.; California Univ., San Diego, La Jolla

1981-01-01

The recent influx of immigrants from Southeast Asia into the United States has increased the likelihood of encountering unusual diseases heretofore rarely seen in this country. Among these disorders is Oriental cholangiohepatitis, a potentially life-threatening process whose early diagnosis is facilitated by roentgenographic findings. Ultrasonography can also provide useful information, although potential pitfalls in diagnosis should be recognized. (orig.)

Information Seeking in Uncertainty Management Theory: Exposure to Information About Medical Uncertainty and Information-Processing Orientation as Predictors of Uncertainty Management Success.

Science.gov (United States)

Rains, Stephen A; Tukachinsky, Riva

2015-01-01

Uncertainty management theory outlines the processes through which individuals cope with health-related uncertainty. Information seeking has been frequently documented as an important uncertainty management strategy. The reported study investigates exposure to specific types of medical information during a search, and one's information-processing orientation as predictors of successful uncertainty management (i.e., a reduction in the discrepancy between the level of uncertainty one feels and the level one desires). A lab study was conducted in which participants were primed to feel more or less certain about skin cancer and then were allowed to search the World Wide Web for skin cancer information. Participants' search behavior was recorded and content analyzed. The results indicate that exposure to two health communication constructs that pervade medical forms of uncertainty (i.e., severity and susceptibility) and information-processing orientation predicted uncertainty management success.

USE OF POWERPOINT POSSIBILITIES IN IMPLEMENTATION OF PROJECT METHOD INTO THE LEARNING PROCESS WHILE STUDYING CHEMISTRY IN PROFESSION-ORIENTED SCHOOL

Directory of Open Access Journals (Sweden)

Maria D. Tukalo

2011-02-01

Full Text Available The article reveals the importance of the opportunities and prospects for the introduction of PowerPoint project method in chemistry lessons in profession-oriented school, which is a prerequisite in the search for innovative, effective and optimal computer-oriented teaching methods and forms for the establishment of conditions for the development of creative potential of students based on competences through the organization individual, creative and research activities in the educational system of modern technology. It enables to design the educational process, use of generalized methods of training for providing training and guaranteed results.

BPLOM: BPM Level-Oriented Methodology for Incremental Business Process Modeling and Code Generation on Mobile Platforms

Directory of Open Access Journals (Sweden)

Jaime Solis Martines

2013-06-01

Full Text Available The requirements engineering phase is the departure point for the development process of any kind of computer application, it determines the functionality needed in the working scenario of the program. Although this is a crucial point in application development, as incorrect requirement definition leads to costly error appearance in later stages of the development process, application domain experts’ implication remains minor. In order to correct this scenario, business process modeling notations were introduced to favor business expert implication in this phase, but notation complexity prevents this participation to reach its ideal state. Hence, we promote the definition of a level oriented business process methodology, which encourages the adaptation of the modeling notation to the modeling and technical knowledge shown by the expert. This approach reduces the complexity found by domain experts and enables them to model their processes completely with a level of technical detail directly proportional to their knowledge.

Automatic pre-processing for an object-oriented distributed hydrological model using GRASS-GIS

Science.gov (United States)

Sanzana, P.; Jankowfsky, S.; Branger, F.; Braud, I.; Vargas, X.; Hitschfeld, N.

2012-04-01

Landscapes are very heterogeneous, which impact the hydrological processes occurring in the catchments, especially in the modeling of peri-urban catchments. The Hydrological Response Units (HRUs), resulting from the intersection of different maps, such as land use, soil types and geology, and flow networks, allow the representation of these elements in an explicit way, preserving natural and artificial contours of the different layers. These HRUs are used as model mesh in some distributed object-oriented hydrological models, allowing the application of a topological oriented approach. The connectivity between polygons and polylines provides a detailed representation of the water balance and overland flow in these distributed hydrological models, based on irregular hydro-landscape units. When computing fluxes between these HRUs, the geometrical parameters, such as the distance between the centroid of gravity of the HRUs and the river network, and the length of the perimeter, can impact the realism of the calculated overland, sub-surface and groundwater fluxes. Therefore, it is necessary to process the original model mesh in order to avoid these numerical problems. We present an automatic pre-processing implemented in the open source GRASS-GIS software, for which several Python scripts or some algorithms already available were used, such as the Triangle software. First, some scripts were developed to improve the topology of the various elements, such as snapping of the river network to the closest contours. When data are derived with remote sensing, such as vegetation areas, their perimeter has lots of right angles that were smoothed. Second, the algorithms more particularly address bad-shaped elements of the model mesh such as polygons with narrow shapes, marked irregular contours and/or the centroid outside of the polygons. To identify these elements we used shape descriptors. The convexity index was considered the best descriptor to identify them with a threshold

Measuring the implementation of ecodesign management practices: a review and consolidation of process-oriented performance indicators

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2017-01-01

Ecodesign plays an important role in manufacturing companies’ quest for improved sustainability performance. However, many ecodesign efforts are geared towards tackling single-issue discrete improvements, in contrast to operationalizing, measuring and acting upon the consistent improvement...... towards enhanced sustainability performance. In face of this challenge, this paper aims at providing organizations with a set of process-oriented indicators to supporting and enhancing ecodesign implementation and management. This research was grounded on a 2-phase approach to (i) cross...

Low-level memory processes in vision.

Science.gov (United States)

Magnussen, S

2000-06-01

Psychophysical studies of the short-term memory for attributes or dimensions of the visual stimulus that are known to be important in early visual processing (spatial frequency, orientation, contrast, motion and color) identify a low-level perceptual memory mechanism. This proposed mechanism is located early in the visual processing stream, prior to the structural description system responsible for shape priming but beyond primary visual cortex (V1); it is composed of a series of parallel, special-purpose perceptual mechanisms with independent but limited processing resources. Each mechanism is devoted to the analysis of a single dimension and is coupled to a memory store.

New channeling effects in the radiative emission of 150 GeV electrons in a thin germanium crystal

International Nuclear Information System (INIS)

Belkacem, A.; Chevallier, M.; Gaillard, M.J.; Genre, R.; Kirsch, R.; Poizat, J.C.; Remillieux, J.; Bologna, G.; Peigneux, J.P.; Sillou, D.; Spighel, M.; Cue, N.; Kimball, J.C.; Marsh, B.; Sun, C.R.

1986-01-01

The orientation dependence of the radiative emission of 150 GeV electrons and positrons incident at small angles with respect to the axial direction of a thin (0.185 mm) Ge crystal has been observed. The processes are well understood, except for channeled electrons, which radiate unexpected high energy photons. (orig.)

Sexual differentiation of the human brain in relation to gender identity and sexual orientation.

Science.gov (United States)

Savic, Ivanka; Garcia-Falgueras, Alicia; Swaab, Dick F

2010-01-01

It is believed that during the intrauterine period the fetal brain develops in the male direction through a direct action of testosterone on the developing nerve cells, or in the female direction through the absence of this hormone surge. According to this concept, our gender identity (the conviction of belonging to the male or female gender) and sexual orientation should be programmed into our brain structures when we are still in the womb. However, since sexual differentiation of the genitals takes place in the first two months of pregnancy and sexual differentiation of the brain starts in the second half of pregnancy, these two processes can be influenced independently, which may result in transsexuality. This also means that in the event of ambiguous sex at birth, the degree of masculinization of the genitals may not reflect the degree of masculinization of the brain. There is no proof that social environment after birth has an effect on gender identity or sexual orientation. Data on genetic and hormone independent influence on gender identity are presently divergent and do not provide convincing information about the underlying etiology. To what extent fetal programming may determine sexual orientation is also a matter of discussion. A number of studies show patterns of sex atypical cerebral dimorphism in homosexual subjects. Although the crucial question, namely how such complex functions as sexual orientation and identity are processed in the brain remains unanswered, emerging data point at a key role of specific neuronal circuits involving the hypothalamus. Copyright © 2010 Elsevier B.V. All rights reserved.

Plug & Play object oriented Bayesian networks

DEFF Research Database (Denmark)

Bangsø, Olav; Flores, J.; Jensen, Finn Verner

2003-01-01

been shown to be quite suitable for dynamic domains as well. However, processing object oriented Bayesian networks in practice does not take advantage of their modular structure. Normally the object oriented Bayesian network is transformed into a Bayesian network and, inference is performed...... dynamic domains. The communication needed between instances is achieved by means of a fill-in propagation scheme....

The role of business processes in service oriented architectures (editorial)

NARCIS (Netherlands)

Aalst, van der W.M.P.; Leymann, F.; Reisig, W.

2007-01-01

Service-Oriented Architectures (SOAs), an emerging paradigm for designing and implementing business collaborations within and across organisational boundaries, are currently of interest to both software vendors and scientists. In this paradigm, the functionality provided by business applications is

Study of two photon production process in proton-proton collisions at 216 MeV

International Nuclear Information System (INIS)

Khrykin, A.S.

2002-01-01

The energy spectrum for high energy γ-rays (Eγ ≥ 10 MeV) from the process pp → γγX emitted at 90 deg. in the laboratory frame has been measured at 216 MeV. The resulting photon energy spectrum extracted from γ - γ coincidence events consists of a narrow peak (5.3σ) at a photon energy of about 24 MeV and a relatively broad peak (3.5σ) in the energy range of (50 - 70) MeV. This behavior of the photon energy spectrum is interpreted as a signature of the exotic dibaryon resonance d 1 * with a mass of about 1956 MeV which is assumed to be formed in the radiative process pp → γd 1 * followed by its electromagnetic decay via the d 1 * → ppγ mode. The experimental spectrum is compared with those obtained by means of Monte Carlo simulations

Auditory orientation in crickets: Pattern recognition controls reactive steering

Science.gov (United States)

Poulet, James F. A.; Hedwig, Berthold

2005-10-01

Many groups of insects are specialists in exploiting sensory cues to locate food resources or conspecifics. To achieve orientation, bees and ants analyze the polarization pattern of the sky, male moths orient along the females' odor plume, and cicadas, grasshoppers, and crickets use acoustic signals to locate singing conspecifics. In comparison with olfactory and visual orientation, where learning is involved, auditory processing underlying orientation in insects appears to be more hardwired and genetically determined. In each of these examples, however, orientation requires a recognition process identifying the crucial sensory pattern to interact with a localization process directing the animal's locomotor activity. Here, we characterize this interaction. Using a sensitive trackball system, we show that, during cricket auditory behavior, the recognition process that is tuned toward the species-specific song pattern controls the amplitude of auditory evoked steering responses. Females perform small reactive steering movements toward any sound patterns. Hearing the male's calling song increases the gain of auditory steering within 2-5 s, and the animals even steer toward nonattractive sound patterns inserted into the speciesspecific pattern. This gain control mechanism in the auditory-to-motor pathway allows crickets to pursue species-specific sound patterns temporarily corrupted by environmental factors and may reflect the organization of recognition and localization networks in insects. localization | phonotaxis

Object orientation affects spatial language comprehension.

Science.gov (United States)

Burigo, Michele; Sacchi, Simona

2013-01-01

Typical spatial descriptions, such as "The car is in front of the house," describe the position of a located object (LO; e.g., the car) in space relative to a reference object (RO) whose location is known (e.g., the house). The orientation of the RO affects spatial language comprehension via the reference frame selection process. However, the effects of the LO's orientation on spatial language have not received great attention. This study explores whether the pure geometric information of the LO (e.g., its orientation) affects spatial language comprehension using placing and production tasks. Our results suggest that the orientation of the LO influences spatial language comprehension even in the absence of functional relationships. Copyright © 2013 Cognitive Science Society, Inc.

Institutional Assessment of Environmentally Oriented Subsoil Use

Directory of Open Access Journals (Sweden)

Irina Gennadyevna Polyanskaya

2017-06-01

Full Text Available The article solves two relevant problems related to the implementation of the institutional assessment of environmentally oriented subsoil use: 1 the definition of the ‘environmental security’ and 2 the determination of the development level of institutional bases of environmentally oriented subsoil use including the institutional capacity of subsoil use and institutional capacity of environmental security. The article shows an analysis of the existing definitions of “environmental security” and offers the own one. Despite the significant national and foreign experience in the institutional capacity assessment of various processes, there are still some difficulties in defining and measuring the institutional capacity. We eliminate these difficulties by employing 1 original factors, previously identified, and the content of the “institutional capacity” term; 2 quality characteristics for the institutional capacity assessment of the process regulated at the macroeconomic level, and 3 a consistent methodological tool for the institutional assessment of environmentally oriented subsoil use. The study is based on the hypothesis of the necessity of legal and discreet state intervention in the process of subsoil use. Therefore, we identify the evaluation indicator of state regulation in the environmentally oriented subsoil use as the institutional capacity level calculated by using the fuzzy-set theory. As a result, the institutional capacity levels of the environmentally oriented subsoil use have been defined for both the transport corridor «Arctic-Central Asia» and for the countries composing it. The obtained values of the assessment of institutional capacity levels of the environmentally oriented subsoil use can serve as a basis for identifying the vector of its increase

VMware vSphere 5.5 cookbook

CERN Document Server

G B, Abhilash

2015-01-01

This is an excellent handbook for system administrators, support professionals, or for anyone intending to give themselves a headstart in learning how to install, configure, and manage a vSphere environment. It is also a good task-oriented reference guide for consultants or infrastructure architects who design and deploy vSphere environments.

Prediction of the Fiber Orientation State and the Resulting Structural and Thermal Properties of Fiber Reinforced Additive Manufactured Composites Fabricated Using the Big Area Additive Manufacturing Process

Directory of Open Access Journals (Sweden)

Timothy Russell

2018-04-01

Full Text Available Recent advances in Fused Filament Fabrication (FFF include large material deposition rates and the addition of chopped carbon fibers to the filament feedstock. During processing, the flow field within the polymer melt orients the fiber suspension, which is important to quantify as the underlying fiber orientation influences the mechanical and thermal properties. This paper investigates the correlation between processing conditions and the resulting locally varying thermal-structural properties that dictate both the final part performance and part dimensionality. The flow domain includes both the confined and unconfined flow indicative of the extruder nozzle within the FFF deposition process. The resulting orientation is obtained through two different isotropic rotary diffusion models, the model by Folgar and Tucker and that of Wang et al., and a comparison is made to demonstrate the sensitivity of the deposited bead’s spatially varying orientation as well as the final processed part’s thermal-structural performance. The results indicate the sensitivity of the final part behavior is quite sensitive to the choice of the slowness parameter in the Wang et al. model. Results also show the need, albeit less than that of the choice of fiber interaction model, to include the extrudate swell and deposition within the flow domain.

Oriented polymers obtained by UV polymerization of oriented low-molecular-weight species

NARCIS (Netherlands)

Broer, D.J.; Mol, G.N.; Bowden, M.J.; Turner, S.R.

1987-01-01

Anisotropic polymer filaments could be produced by in-situ photopolymerization of oriented acrylate monomers. Ordering of the monomers was achieved by an elongational flow prior to the polymerization process. The produced polymers showed a high elastic modulus and a low thermal expansion coefficient

Inferences on the population structure and colonization process of the invasive oriental fruit fly, Bactrocera dorsalis (Hendel).

Science.gov (United States)

Aketarawong, N; Bonizzoni, M; Thanaphum, S; Gomulski, L M; Gasperi, G; Malacrida, A R; Gugliemino, C R

2007-09-01

The phytophagous insects of the Tephritidae family offer different case histories of successful invasions. An example is Bactrocera dorsalis sensu stricto, the oriental fruit fly which has been recognized as a key pest of Asia and the Pacific. It is known to have the potential to establish adventive populations in various tropical and subtropical areas. Despite the economic risk associated with a putative stable presence of this fly, the genetic aspects of its invasion process have remained relatively unexplored. Using microsatellite markers we have investigated the population structure and genetic variability in 14 geographical populations across the four areas of the actual species range: Far East Asia, South Asia, Southeast Asia and the Pacific Area. Results of clustering and admixture, associated with phylogenetic and migration analyses, were used to evaluate the changes in population genetic structure that this species underwent during its invasion process and establishment in the different areas. The colonization process of this fly is associated with a relatively stable population demographic structure, especially in an unfragmented habitat, rich in intensive cultivation such as in Southeast Asia. In this area, the results suggest a lively demographic history, characterized by evolutionary recent demographic expansions and no recent bottlenecks. Cases of genetic isolation attributable to geographical factors, fragmented habitats and/or fruit trade restrictions were observed in Bangladesh, Myanmar and Hawaii. Regarding the pattern of invasion, the overall genetic profile of the considered populations suggests a western orientated migration route from China to the West.

Magnetic losses reduction in grain oriented silicon steel by pulse and continuous fiber laser processing

Science.gov (United States)

Petryshynets, Ivan; Kováč, František; Puchý, Viktor; Šebek, Martin; Füzer, Ján; Kollár, Peter

2018-04-01

The present paper shows the impact of different laser scribing conditions on possible reduction of magnetic losses in grain oriented electrical steel sheets. The experimental Fe-3%Si steel was taken from industrial line after final box annealing. The surface of investigated steel was subjected to fiber laser processing using both pulse and continuous scribing regimes in order to generate residual thermal stresses inducing the magnetic domains structure refinement. The magnetic losses of experimental samples before and after individual laser scribing regimes were tested in AC magnetic field with 50Hz frequency and induction of 1.5T. The most significant magnetic losses reduction of 38% was obtained at optimized conditions of continuous laser scribing regime. A semi quantitative relationship has been found between the domain patterns and the used fiber laser processing.

Engineering of oriented carbon nanotubes in composite materials

Science.gov (United States)

Beigmoradi, Razieh; Mohebbi-Kalhori, Davod

2018-01-01

The orientation and arrangement engineering of carbon nanotubes (CNTs) in composite structures is considered a challenging issue. In this regard, two groups of in situ and ex situ techniques have been developed. In the first, the arrangement is achieved during CNT growth, while in the latter, the CNTs are initially grown in random orientation and the arrangement is then achieved during the device integration process. As the ex situ techniques are free from growth restrictions and more flexible in terms of controlling the alignment and sorting of the CNTs, they are considered by some as the preferred technique for engineering of oriented CNTs. This review focuses on recent progress in the improvement of the orientation and alignment of CNTs in composite materials. Moreover, the advantages and disadvantages of the processes are discussed as well as their future outlook. PMID:29515955

Nanostructured carbon films with oriented graphitic planes

International Nuclear Information System (INIS)

Teo, E. H. T.; Kalish, R.; Kulik, J.; Kauffmann, Y.; Lifshitz, Y.

2011-01-01

Nanostructured carbon films with oriented graphitic planes can be deposited by applying energetic carbon bombardment. The present work shows the possibility of structuring graphitic planes perpendicular to the substrate in following two distinct ways: (i) applying sufficiently large carbon energies for deposition at room temperature (E>10 keV), (ii) utilizing much lower energies for deposition at elevated substrate temperatures (T>200 deg. C). High resolution transmission electron microscopy is used to probe the graphitic planes. The alignment achieved at elevated temperatures does not depend on the deposition angle. The data provides insight into the mechanisms leading to the growth of oriented graphitic planes under different conditions.

Top-down inputs enhance orientation selectivity in neurons of the primary visual cortex during perceptual learning.

Directory of Open Access Journals (Sweden)

Samat Moldakarimov

2014-08-01

Full Text Available Perceptual learning has been used to probe the mechanisms of cortical plasticity in the adult brain. Feedback projections are ubiquitous in the cortex, but little is known about their role in cortical plasticity. Here we explore the hypothesis that learning visual orientation discrimination involves learning-dependent plasticity of top-down feedback inputs from higher cortical areas, serving a different function from plasticity due to changes in recurrent connections within a cortical area. In a Hodgkin-Huxley-based spiking neural network model of visual cortex, we show that modulation of feedback inputs to V1 from higher cortical areas results in shunting inhibition in V1 neurons, which changes the response properties of V1 neurons. The orientation selectivity of V1 neurons is enhanced without changing orientation preference, preserving the topographic organizations in V1. These results provide new insights to the mechanisms of plasticity in the adult brain, reconciling apparently inconsistent experiments and providing a new hypothesis for a functional role of the feedback connections.

CLUB COURSE D'ORIENTATION

CERN Multimedia

CLUB COURSE D'ORIENTATION

2010-01-01

COURSE D’ORIENTATION    Automne 2010 : Quel programme!   Après une pause de deux mois, le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une nouvelle série de courses d’orientation pour cet automne. Ces courses ont lieu généralement le samedi entre 13h00 et 17h00. 5 circuits sont disponibles, ceci va du facile court (2 km) adapté aux débutants et aux enfants jusqu’au parcours technique long de 6 km pour les chevronnés en passant par les parcours facile moyen (4 km), technique court (3,5 km) ou technique moyen (4,5 km). Il y aura donc toujours un parcours à votre niveau. Un classement général est effectué pour vous motiver à persévérer ! Ces courses (ou promena...

Expanded separation technique for chlorophyll metabolites in Oriental tobacco leaf using non aqueous reversed phase chromatography.

Science.gov (United States)

Ishida, Naoyuki

2011-08-26

An improved separation method for chlorophyll metabolites in Oriental tobacco leaf was developed. While Oriental leaf still gives the green color even after the curing process, little attention has been paid to the detailed composition of the remaining green pigments. This study aimed to identify the green pigments using non aqueous reversed phase chromatography (NARPC). To this end, liquid chromatograph (LC) equipped with a photo diode array detector (DAD) and an atmospheric pressure chemical ionization/mass spectrometer (APCI/MSD) was selected, because it is useful for detecting low polar non-volatile compounds giving green color such as pheophytin a. Identification was based on the wavelength spectrum, mass spectrum and retention time, comparing the analytes in Oriental leaf with the commercially available and synthesized components. Consequently, several chlorophyll metabolites such as hydroxypheophytin a, solanesyl pheophorbide a and solanesyl hydroxypheophorbide a were newly identified, in addition to typical green pigments such as chlorophyll a and pheophytin a. Chlorophyll metabolites bound to solanesol were considered the tobacco specific components. NARPC expanded the number of detectable low polar chlorophyll metabolites in Oriental tobacco leaf. Copyright © 2011 Elsevier B.V. All rights reserved.

Holistic face representation is highly orientation-specific.

Science.gov (United States)

Rosenthal, Gideon; Levakov, Gidon; Avidan, Galia

2017-09-29

It has long been argued that face processing requires disproportionate reliance on holistic processing (HP), relative to that required for nonface object recognition. Nevertheless, whether the holistic nature of face perception is achieved via a unique internal representation or by the employment of an automated attention mechanism is still debated. Previous studies had used the face inversion effect (FIE), a unique face-processing marker, or the face composite task, a gold standard paradigm measuring holistic processing, to examine the validity of these two different hypotheses, with some studies combining the two paradigms. However, the results of such studies remain inconclusive, particularly pertaining to the issue of the two proposed HP mechanisms-an internal representation as opposed to an automated attention mechanism. Here, using the complete composite paradigm design, we aimed to examine whether face rotation yields a nonlinear or a linear drop in HP, thus supporting an account that face processing is based either on an orientation-dependent internal representation or on automated attention. Our results reveal that even a relatively small perturbation in face orientation (30 deg away from upright) already causes a sharp decline in HP. These findings support the face internal representation hypothesis and the notion that the holistic processing of faces is highly orientation-specific.

Fathers' Orientation to Their Children's Autism Diagnosis: A Grounded Theory Study

Science.gov (United States)

Hannon, Michael D.; Hannon, LaChan V.

2017-01-01

Sixteen fathers of individuals with autism were interviewed to develop a grounded theory explaining how they learned about their children's autism diagnosis. Results suggest the orientation process entails at least two phases: orienting oneself and orienting others. The orienting oneself phase entailed fathers having suspicion of developmental…

Dominant acceleration processes of ambient energetic protons (E>= 50 keV) at the bow shock: conditions and limitations

International Nuclear Information System (INIS)

Anagnostopoulos, G.C.; Sarris, E.T.

1983-01-01

Energetic proton (Esub(p)>= 50 keV) and magnetic field observations during crossings of the Earth's Bow Shock by the IMP-7 and 8 spacecraft are incorporated in this work in order to examine the effect of the Bow Shock on a pre-existing proton population under different ''interplanetary magnetic field-Bow Shock'' configurations, as well as the conditions for the presence of the Bow Shock associated energetic proton intensity enhancements. The presented observations indicate that the dominant process for the efficient acceleration of ambient energetic particles to energies exceeding approximately 50 keV is by ''gradient-B'' drifting parallel to the induced electric field at quasi-perpendicular Bow Shocks under certain well defined limitations deriving from the finite and curved Bow Shock surface. It is shown that the proton acceleration at the Bow Shock is most efficient for high values of the upstream magnetic field (in general B 1 > 8#betta#), high upstream plasma speed and expanded Bow Shock fronts, as well as for direction of the induced electric field oriented almost parallel to the flanks of the Bow Shock, i.e. when the drift distance of protons parallel to the electric field at the shock front is considerably smaller than the local radius of curvature of the Bow Shock. The implications of the presented observations of Bow Shock crossings as to the source of the energetic proton intensity enhancements are discussed. (author)

Entrepreneurial orientation, market orientation, and competitive environment

DEFF Research Database (Denmark)

Sørensen, Hans Eibe; Cadogan, John W.

This study sheds light on the role that the competitive environment plays in determining how elements of market orientation and elements of entrepreneurial orientation interact to influence business success. We develop a model in which we postulate that market orientation, entrepreneurial...... orientation, and competitive environment shape business performance via a three-way interaction. We test the model using primary data from the CEOs of 270 CEO of manufacturing firms, together with secondary data on these firms' profit performance. An assessment of the results indicates that customer...... orientation moderates the positive relationships between the competitiveness element of entrepreneurial orientation and market share and return on assets (ROA): the positive relationships between competitiveness and market share and competitiveness and ROA become stronger the greater the firms' customer...

Product Innovation in Sustainability-Oriented New Ventures : A Process Perspective

NARCIS (Netherlands)

Keskin, D.

2015-01-01

Despite the recognition that new ventures are potential candidates of creating innovations necessary for sustainability, little is know on how they actually engage in this journey. Sustainability-oriented new ventures are confronted with high levels of uncertainty that stem from the liabilities of

The basis of orientation decoding in human primary visual cortex: fine- or coarse-scale biases?

Science.gov (United States)

Maloney, Ryan T

2015-01-01

Orientation signals in human primary visual cortex (V1) can be reliably decoded from the multivariate pattern of activity as measured with functional magnetic resonance imaging (fMRI). The precise underlying source of these decoded signals (whether by orientation biases at a fine or coarse scale in cortex) remains a matter of some controversy, however. Freeman and colleagues (J Neurosci 33: 19695-19703, 2013) recently showed that the accuracy of decoding of spiral patterns in V1 can be predicted by a voxel's preferred spatial position (the population receptive field) and its coarse orientation preference, suggesting that coarse-scale biases are sufficient for orientation decoding. Whether they are also necessary for decoding remains an open question, and one with implications for the broader interpretation of multivariate decoding results in fMRI studies. Copyright © 2015 the American Physiological Society.

Orientation masking and cross-orientation suppression (XOS): implications for estimates of filter bandwidth.

Science.gov (United States)

Meese, Tim S; Holmes, David J

2010-10-01

Most contemporary models of spatial vision include a cross-oriented route to suppression (masking from a broadly tuned inhibitory pool), which is most potent at low spatial and high temporal frequencies (T. S. Meese & D. J. Holmes, 2007). The influence of this pathway can elevate orientation-masking functions without exciting the target mechanism, and because early psychophysical estimates of filter bandwidth did not accommodate this, it is likely that they have been overestimated for this corner of stimulus space. Here we show that a transient 40% contrast mask causes substantial binocular threshold elevation for a transient vertical target, and this declines from a mask orientation of 0° to about 40° (indicating tuning), and then more gently to 90°, where it remains at a factor of ∼4. We also confirm that cross-orientation masking is diminished or abolished at high spatial frequencies and for sustained temporal modulation. We fitted a simple model of pedestal masking and cross-orientation suppression (XOS) to our data and those of G. C. Phillips and H. R. Wilson (1984) and found the dependency of orientation bandwidth on spatial frequency to be much less than previously supposed. An extension of our linear spatial pooling model of contrast gain control and dilution masking (T. S. Meese & R. J. Summers, 2007) is also shown to be consistent with our results using filter bandwidths of ±20°. Both models include tightly and broadly tuned components of divisive suppression. More generally, because XOS and/or dilution masking can affect the shape of orientation-masking curves, we caution that variations in bandwidth estimates might reflect variations in processes that have nothing to do with filter bandwidth.

Internal model of gravity influences configural body processing.

Science.gov (United States)

Barra, Julien; Senot, Patrice; Auclair, Laurent

2017-01-01

Human bodies are processed by a configural processing mechanism. Evidence supporting this claim is the body inversion effect, in which inversion impairs recognition of bodies more than other objects. Biomechanical configuration, as well as both visual and embodied expertise, has been demonstrated to play an important role in this effect. Nevertheless, the important factor of body inversion effect may also be linked to gravity orientation since gravity is one of the most fundamental constraints of our biology, behavior, and perception on Earth. The visual presentation of an inverted body in a typical body inversion paradigm turns the observed body upside down but also inverts the implicit direction of visual gravity in the scene. The orientation of visual gravity is then in conflict with the direction of actual gravity and may influence configural processing. To test this hypothesis, we dissociated the orientations of the body and of visual gravity by manipulating body posture. In a pretest we showed that it was possible to turn an avatar upside down (inversion relative to retinal coordinates) without inverting the orientation of visual gravity when the avatar stands on his/her hands. We compared the inversion effect in typical conditions (with gravity conflict when the avatar is upside down) to the inversion effect in conditions with no conflict between visual and physical gravity. The results of our experiment revealed that the inversion effect, as measured by both error rate and reaction time, was strongly reduced when there was no gravity conflict. Our results suggest that when an observed body is upside down (inversion relative to participants' retinal coordinates) but the orientation of visual gravity is not, configural processing of bodies might still be possible. In this paper, we discuss the implications of an internal model of gravity in the configural processing of observed bodies. Copyright © 2016 Elsevier B.V. All rights reserved.

Changing career orientations in higher education: Can HE be a ...

African Journals Online (AJOL)

This article reports on a study of the career orientations of the academic staff complement of a tertiary education institution that underwent an intensive organisational transformation process. Career orientation profiles were obtained from a sample of academic staff at the beginning of the organisational change process and ...

On the implementation of the competence-oriented education strategies in schools of Olympic reserve [K voprosu o realizacii kompetentnostno-orientirovannoj strategii obrazovaniia v uchilishchakh olimpijskogo rezerva

Directory of Open Access Journals (Sweden)

Argunova L.L.

2011-11-01

Full Text Available It is considered the most appropriate algorithms for the formation of the key competencies of the students in a particular mode of learning. It is mentioned about need for reforms in the education system. Shows the main directions of the competence-oriented learning strategies. A search for the most promising technologies of formation of competences. Presents the results of monitoring the subjects of the educational process. Argued that the curriculum of the schools of Olympic reserve must have a clear practical orientation. It is proposed to use the interdisciplinary approach to learning.

Market oriented new product development: How can a means-end chain approach affect the process?

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted

Few disagree on the advantage of market oriented product development. However, can a well-known theory on consumer behaviour be used as a catalyst for achieving it? This paper describes a case study where means-end chain (MEC) approach was introduced to a cross-functional development team at two...... different stages of the development process. Results show that MEC data is perceived as a good way of gaining knowledge about consumers; that the information serves well as the basis of discussions and for keeping project goals fixed. The results also indicate that MEC data are most valuable to the team...

Temporal resolution of orientation-defined texture segregation: a VEP study.

Science.gov (United States)

Lachapelle, Julie; McKerral, Michelle; Jauffret, Colin; Bach, Michael

2008-09-01

Orientation is one of the visual dimensions that subserve figure-ground discrimination. A spatial gradient in orientation leads to "texture segregation", which is thought to be concurrent parallel processing across the visual field, without scanning. In the visual-evoked potential (VEP) a component can be isolated which is related to texture segregation ("tsVEP"). Our objective was to evaluate the temporal frequency dependence of the tsVEP to compare processing speed of low-level features (e.g., orientation, using the VEP, here denoted llVEP) with texture segregation because of a recent literature controversy in that regard. Visual-evoked potentials (VEPs) were recorded in seven normal adults. Oriented line segments of 0.1 degrees x 0.8 degrees at 100% contrast were presented in four different arrangements: either oriented in parallel for two homogeneous stimuli (from which were obtained the low-level VEP (llVEP)) or with a 90 degrees orientation gradient for two textured ones (from which were obtained the texture VEP). The orientation texture condition was presented at eight different temporal frequencies ranging from 7.5 to 45 Hz. Fourier analysis was used to isolate low-level components at the pattern-change frequency and texture-segregation components at half that frequency. For all subjects, there was lower high-cutoff frequency for tsVEP than for llVEPs, on average 12 Hz vs. 17 Hz (P = 0.017). The results suggest that the processing of feature gradients to extract texture segregation requires additional processing time, resulting in a lower fusion frequency.

Irradiation-induced amorphization process in graphite

Energy Technology Data Exchange (ETDEWEB)

Abe, Hiroaki [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1996-04-01

Effects of the element process of irradiation damage on irradiation-induced amorphization processes of graphite was studied. High orientation thermal decomposed graphite was cut about 100 nm width and used as samples. The irradiation experiments are carried out under the conditions of electronic energy of 100-400 KeV, ion energy of 200-600 KeV, ionic species Xe, Ar, Ne, C and He and the irradiation temperature at from room temperature to 900 K. The critical dose ({phi}a) increases exponentially with increasing irradiation temperature. The displacement threshold energy of graphite on c-axis direction was 27 eV and {phi}a{sup e} = 0.5 dpa. dpa is the average number of displacement to atom. The critical dose of ion irradiation ({phi}a{sup i}) was 0.2 dpa at room temperature, and amorphous graphite was produced by less than half of dose of electronic irradiation. Amorphization of graphite depending upon temperature is discussed. (S.Y.)

CLIMLAB: a Python-based software toolkit for interactive, process-oriented climate modeling

Science.gov (United States)

Rose, B. E. J.

2015-12-01

Global climate is a complex emergent property of the rich interactions between simpler components of the climate system. We build scientific understanding of this system by breaking it down into component process models (e.g. radiation, large-scale dynamics, boundary layer turbulence), understanding each components, and putting them back together. Hands-on experience and freedom to tinker with climate models (whether simple or complex) is invaluable for building physical understanding. CLIMLAB is an open-ended software engine for interactive, process-oriented climate modeling. With CLIMLAB you can interactively mix and match model components, or combine simpler process models together into a more comprehensive model. It was created primarily to support classroom activities, using hands-on modeling to teach fundamentals of climate science at both undergraduate and graduate levels. CLIMLAB is written in Python and ties in with the rich ecosystem of open-source scientific Python tools for numerics and graphics. The IPython notebook format provides an elegant medium for distributing interactive example code. I will give an overview of the current capabilities of CLIMLAB, the curriculum we have developed thus far, and plans for the future. Using CLIMLAB requires some basic Python coding skills. We consider this an educational asset, as we are targeting upper-level undergraduates and Python is an increasingly important language in STEM fields. However CLIMLAB is well suited to be deployed as a computational back-end for a graphical gaming environment based on earth-system modeling.

Examining the impact of business process orientation on organizational performance: the case of Croatia

Directory of Open Access Journals (Sweden)

Ljubica Milanović Glavan

2017-01-01

Full Text Available The competitive global market of the new millennium has raised awareness of business processes as the most important management paradigm. Extensive literature on business process management suggests that organizations can enhance their overall performance by adopting a process view of business. However, empirical research in this field is lacking. The aim of this paper is to examine the how business process orientation (BPO impacts financially and non-financially organizational performance (OP using empirical data from Croatian companies. A questionnaire survey was conducted on a sample of 127 companies in Croatia and propositions were tested using a structural equation model. The results suggest that the BPO practice relates positively to non-financial performance. In addition, the impact of non-financial performance on financial performance has been verified as well. This effect on financial performance is indirectly caused by non-financial factors suggesting that companies should view performance in such terms as well. The paper is valuable for academics and practitioners because the impact of BPO on OP is confirmed. An improved understanding and the clearly demonstrated financial and non-financial benefits of implementing and practicing BPO opens up a wider application of such systems in everyday business, which will eventually lead to their refinement and further development.

EFL Teachers’ Epistemological Beliefs and Their Assessment Orientations

Directory of Open Access Journals (Sweden)

Ammar Abdullah Mahmoud Ismail

2016-11-01

Full Text Available Epistemological beliefs—beliefs about the nature of knowledge, where it resides, and how knowledge is constructed and evaluated—have been the target of increased research interest lately. Heretofore, emphasis has been directed to language teaching/learning aspects and strategies. Language assessment practices have not yet received due attention in epistemic research literature. The current study examined the relationship between pre-service EFL teachers’ epistemological beliefs and their assessment orientations. Dimensions of epistemological beliefs were assessed via a questionnaire designed and validated by the researcher based on Schommer’s work. Two assessment orientations were examined including: (a transmissive surface- processing orientation and (b constructive deep-processing orientation. The study involved 114 preservice EFL teachers enrolled in the Professional Diploma in Teaching Program in the Abu Dhabi University, the United Arab Emirates. Results of the study showed that EFL teachers’ epistemological beliefs have a direct bearing on their assessment orientations and practices. EFL teachers with naive epistemological beliefs tended more to adopt surface-level assessment orientations whereas those with sophisticated epistemological beliefs showed more tendency to adopt deeper level approaches to assessment in language settings. Results are discussed in terms of backwash effects on foreign language instruction, curriculum development, and teacher education. Suggestions for further research are also discussed.

Cloning, preparation and preliminary crystallographic studies of penicillin V acylase autoproteolytic processing mutants

International Nuclear Information System (INIS)

Chandra, P. Manish; Brannigan, James A.; Prabhune, Asmita; Pundle, Archana; Turkenburg, Johan P.; Dodson, G. Guy; Suresh, C. G.

2004-01-01

The production, crystallization and characterization of three inactive mutants of penicillin V acylase from B. sphaericus in their respective precursor and processed forms are reported. The space groups are different for the native enzyme and the mutants. The crystallization of three catalytically inactive mutants of penicillin V acylase (PVA) from Bacillus sphaericus in precursor and processed forms is reported. The mutant proteins crystallize in different primitive monoclinic space groups that are distinct from the crystal forms for the native enzyme. Directed mutants and clone constructs were designed to study the post-translational autoproteolytic processing of PVA. The catalytically inactive mutants will provide three-dimensional structures of precursor PVA forms, plus open a route to the study of enzyme–substrate complexes for this industrially important enzyme

Current status of agricultural extension services for market oriented ...

African Journals Online (AJOL)

Current status of agricultural extension services for market oriented agricultural development in Ethiopia: Results from a household baseline ... Log in or Register to get access to full text downloads. ... http://dx.doi.org/10.4314/afrrev.v10i3.1.

Dual tuning in creative processes: Joint contributions of intrinsic and extrinsic motivational orientations.

Science.gov (United States)

Gong, Yaping; Wu, Junfeng; Song, Lynda Jiwen; Zhang, Zhen

2017-05-01

Intrinsic and extrinsic motivational orientations often coexist and can serve important functions. We develop and test a model in which intrinsic and extrinsic motivational orientations interact positively to influence personal creativity goal. Personal creativity goal, in turn, has a positive relationship with incremental creativity and an inverted U-shaped relationship with radical creativity. In a pilot study, we validated the personal creativity goal measure using 180 (Sample 1) and 69 (Sample 2) employees from a consulting firm. In the primary study, we tested the overall model using a sample of 657 research and development employees and their direct supervisors from an automobile firm. The results support the hypothesized model and yield several new insights. Intrinsic and extrinsic motivational orientations synergize with each other to strengthen personal creativity goal. Personal creativity goal in turn benefits incremental and radical creativity, but only up to a certain point for the latter. In addition to its linear indirect relationship with incremental creativity, intrinsic motivational orientation has an inverted U-shaped indirect relationship with radical creativity via personal creativity goal. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Perceptions of Sexual Orientation From Minimal Cues.

Science.gov (United States)

Rule, Nicholas O

2017-01-01

People derive considerable amounts of information about each other from minimal nonverbal cues. Apart from characteristics typically regarded as obvious when encountering another person (e.g., age, race, and sex), perceivers can identify many other qualities about a person that are typically rather subtle. One such feature is sexual orientation. Here, I review the literature documenting the accurate perception of sexual orientation from nonverbal cues related to one's adornment, acoustics, actions, and appearance. In addition to chronicling studies that have demonstrated how people express and extract sexual orientation in each of these domains, I discuss some of the basic cognitive and perceptual processes that support these judgments, including how cues to sexual orientation manifest in behavioral (e.g., clothing choices) and structural (e.g., facial morphology) signals. Finally, I attend to boundary conditions in the accurate perception of sexual orientation, such as the states, traits, and group memberships that moderate individuals' ability to reliably decipher others' sexual orientation.

Quality-guided orientation unwrapping for fringe direction estimation.

Science.gov (United States)

Wang, Haixia; Kemao, Qian

2012-02-01

Fringe patterns produced by various optical interferometric techniques encode information such as shape, deformation, and refractive index. Denoising and demodulation are two important procedures to retrieve information from a single closed fringe pattern. Various existing denoising and demodulation techniques require fringe direction/orientation during the processing. Fringe orientation is often easier to obtain but fringe direction is needed in some demodulation techniques. A quality-guided orientation unwrapping scheme is proposed to estimate direction from orientation. Two techniques, one based on windowed Fourier ridges and the other based on fringe gradient, are proposed for the quality-guided orientation unwrapping scheme. The direction qualities are compared for both simulated and experimental fringe patterns. Their application to demodulation technique is also given.

The Consequences of Market Orientation on Business Performance

Directory of Open Access Journals (Sweden)

Luminiţa Ştefania Bodea

2016-01-01

Full Text Available The present research aims to develop a conceptual model to test the market orientation dimensions: customer orientation, competitor orientation, interfunctional coordination, and their effects on organizational performance. The most common question found in marketing studies refers to the role assigned to the marketing concept to achieve performance. Often, companies are forced to undertake different strategic approaches to be competitive, but few companies manage to become market oriented and meet difficulties in implementing the marketing concept, because the environment in which they operate are extremely dynamic. The present empirical study utilized the results obtained by processing 121 completed questionnaires containing data from large firms that operate in Romanian. The presence of the following market orientation dimensions: customer orientation, competitor orientation and interfunctional coordination, and their consequences on organizational performance were tested using simple linear regression. The results show that the surveyed firms are market oriented and the positive consequences of this orientation dimensions on performance. The major contribution of the study is that it provides empirical proof of the effect of marketing on firm performance.

Magnetic losses reduction in grain oriented silicon steel by pulse and continuous fiber laser processing

Directory of Open Access Journals (Sweden)

Ivan Petryshynets

2018-04-01

Full Text Available The present paper shows the impact of different laser scribing conditions on possible reduction of magnetic losses in grain oriented electrical steel sheets. The experimental Fe-3%Si steel was taken from industrial line after final box annealing. The surface of investigated steel was subjected to fiber laser processing using both pulse and continuous scribing regimes in order to generate residual thermal stresses inducing the magnetic domains structure refinement. The magnetic losses of experimental samples before and after individual laser scribing regimes were tested in AC magnetic field with 50Hz frequency and induction of 1.5T. The most significant magnetic losses reduction of 38% was obtained at optimized conditions of continuous laser scribing regime. A semi quantitative relationship has been found between the domain patterns and the used fiber laser processing.

Oriented Approach

Directory of Open Access Journals (Sweden)

Seyed Mohammad Moghimi

2013-12-01

Full Text Available Promoting productivity is one of the goals of usinginformation technology in organizations. The purpose of this research isexamining the impact of IT on organizational productivity andrecognizing its mechanisms based on process-oriented approach. For thisend, by reviewing the literature of the subject a number of impacts of ITon organizational processes were identified. Then, through interviewswith IT experts, seven main factors were selected and presented in aconceptual model. This model was tested through a questionnaire in 148industrial companies. Data analysis shows that impact of IT onproductivity can be included in the eight major categories: Increasing ofthe Automation, Tracking, Communication, Improvement, Flexibility,Analytic, Coordination and Monitoring in organizational processes.Finally, to improve the impact of information technology onorganizational productivity, some suggestions are presented.

Investigation on mechanical alloying process for v-cr-ti alloys

International Nuclear Information System (INIS)

Stanciulescu, M.; Carlan, P.; Mihalache, M.; Bucsa, G.; Abrudeanu, M.; Galateanu, A.

2015-01-01

Mechanical alloying (MA) is an efficient approach for fabricating oxide-dispersion alloys and structural materials including vanadium alloys for fusion and fission application. Dissolution behaviour of the alloying elements is a key issue for optimizing the mechanical alloying process in fabricating vanadium alloys. This paper studies the MA process of V-4wt.%Cr-4wt.%Ti alloy. The outcomes of the MA powders in a planetary ball mill are reported in terms of powder particle size and morphology evolution and elemental composition. The impact of spark-plasma sintering process on the mechanically alloyed powder is analysed. An optimal set of sintering parameters, including the maximum temperature, the dwell time and the heating rate are determined. (authors)

Coherence in product-oriented policies and environmental management systems in the car industry

DEFF Research Database (Denmark)

Smink, Carla Kornelia; Nielsen, Eskild Holm

more traditional process-oriented policies and are a challenge for companies. The article presents some of the authors  investigations on how the car industry has dealt with both process-oriented and product-oriented policies. [1] EPR refers to extending producer responsibility for products beyond......Over the last decade, product-oriented policies as Extended Producer Responsibility (EPR) and Integrated Product Policy (IPP) are more and more recognised as a target for both corporate environmental strategy and government environmental policy. These product-oriented policies are distinct from...

Systematic and heuristic processing of majority and minority-endorsed messages: the effects of varying outcome relevance and levels of orientation on attitude and message processing.

Science.gov (United States)

Martin, Robin; Hewstone, Miles; Martin, Pearl Y

2007-01-01

Two experiments investigated the conditions under which majority and minority sources instigate systematic processing of their messages. Both experiments crossed source status (majority vs. minority) with message quality (strong vs. weak arguments). In each experiment, message elaboration was manipulated by varying either motivational (outcome relevance, Experiment 1) or cognitive (orientating tasks, Experiment 2) factors. The results showed that when either motivational or cognitive factors encouraged low message elaboration, there was heuristic acceptance of the majority position without detailed message processing. When the level of message elaboration was intermediate, there was message processing only for the minority source. Finally, when message elaboration was high, there was message processing for both source conditions. These results show that majority and minority influence is sensitive to motivational and cognitive factors that constrain or enhance message elaboration and that both sources can lead to systematic processing under specific circumstances.

LCA as a Tool for Assessing Product and Process Oriented Eco-Innovations Undertaken by Enterprises

Directory of Open Access Journals (Sweden)

Rybaczewska-Błażejowska Magdalena

2017-09-01

Full Text Available This paper examines the application of life cycle assessment (LCA as an approach to foster the product and process oriented eco- innovation of enterprises, using the fruit and vegetable processing plant as an example. LCA, which is traditionally used to assess the impacts of a single product system on the environment, was applied in the enterprise context. This was made possible by forming an indicator describing the environmental profile of an enterprise, which is calculated by the sum of the multiplication of the environmental impact assessment (LCIA results for individual unit processes within a particular impact category and their weights reflecting the structure of production in an enterprise. In order to distinguish and indicate the direction in which an enterprise should undertake its eco-innovative actions (implementing eco-innovations within the product or production process the LCIA results are presented individually for products and production processes. The research was conducted in full compliance with the LCA methodology. LCA proved that the analysed enterprise has the largest negative impacts on the environment in the following impact categories: marine eco-toxicity, freshwater eco-toxicity, freshwater eutrophication, human toxicity and natural land transformation. They result primarily from the consumption of thermal and electric energy in the production processes. Therefore, to improve energy efficiency, the enterprise should take eco-innovative actions in the processes applied.

Cross sections and spin polarizations of electrons elastically scattered from oriented molecules (CH3I)

International Nuclear Information System (INIS)

Fink, M.; Ross, A.W.; Fink, R.J.

1989-01-01

Elastic differential cross sections and spin polarizations for electrons elastically scattered from CH 3 I are calculated using the independent atom model. Three molecular orientations with respect to the incident electron wavevector are considered - first, the molecule is oriented randomly, second, the electron wave front and molecular bond are parallel, and third, the wavefront and the bond axis are perpendicular. It will be seen to what extent orientational averaging weakens features of the cross section and spin polarization. The calculations show that cross section and spin polarization measurements are a possible tool for determining the degree of molecular orientation. There is no degeneracy between I-C and C-I in cross section and spin polarization measurements. The results presented here for 200 eV and 600 eV electrons scattered by CH 3 I should be considered as a case study and it should be possible to find molecules and electron energies for which even more dramatic differences between the various orientations between the molecules and the electrons can be expected. (orig.)

Growth of α-V{sub 2}O{sub 5} nanostructured thin films as a function of deposition process

Energy Technology Data Exchange (ETDEWEB)

Singh, Megha, E-mail: meghasingh.life@gmail.com; Sharma, Rabindar K.; Reddy, G. B. [Thin film Laboratory, Department of Physics, Indian Institute of Technology Delhi -110016 (India)

2016-05-23

In this communication, we synthesizedvanadium pentoxide (α-V{sub 2}O{sub 5}) nanostructured thin films (NSTs) using four different methods for obtaining vanadate species namely thermal evaporation (source of vanadate species are V{sub 2}O{sub 5} powder and vanadium metal foil) and plasma assisted sublimation process (source of vanadate species are V{sub 2}O{sub 5} powder and vanadium metal foil). The effect of plasmaon morphological and structural propertieshave been systematicallystudied. XRD revealed thermal evaporation process yielded amorphous films whereassublimation process yielded highly crystalline α-V{sub 2}O{sub 5} films. HRTEM of nanobelts show, the growth is preferred in (001) crystallographic direction with interplanar distance of 0.43 nm. XPS revealed O/V ratio of ~2.4, which nearly agrees with standard V{sub 2}O{sub 5} stoichiometry. SEM revealed deposition process affect morphology of films; thermal evaporation results in smoother film while plasma assisted sublimation process reveals nanoflakes and nanobelts (NBs). All the results are inconcordance with each other.

Exploring exploration orientation and its determinants : Some empirical evidence

NARCIS (Netherlands)

Commandeur, H.R.; Volberda, H.W.; Sidhu, J.S.

2004-01-01

Adopting an information-process perspective, this article conceptualizes exploration orientation in terms of scope of information acquisition. In line with this conceptualization, a multidimensional operational measure of exploration orientation is developed and its internal consistency established.

The emerging role of corporate information systems: An example from the area of business process-oriented learning

Directory of Open Access Journals (Sweden)

Stergioulas, L.K.

2008-01-01

Full Text Available Emerging business requirements, stemming from a holistic view over an organisation’s activities, place additional pressure on technical infrastructures and call for operational agility and a better alignment between business and technology. Business process oriented learning unites corporate training and business process management. Given the importance of an organisation’s human capital to business success, aligning individual training with business priorities, becomes a key challenge. The implementation of this new business service entails integrating learning into daily working tasks and putting in place mechanisms for the effective management of business processes, organisational roles, competencies and learning processes, to reduce the time to fill competency gaps and to build proficiency according to evolving business needs. In this paper we outline the main characteristics of this approach and provide insights regarding the changing role of the involved corporate information systems and the multiple aspects of the integration work.

Adenoviral protein V promotes a process of viral assembly through nucleophosmin 1

Energy Technology Data Exchange (ETDEWEB)

Ugai, Hideyo; Dobbins, George C.; Wang, Minghui [Division of Human Gene Therapy, Departments of Medicine, Obstetrics and Gynecology, Pathology, and Surgery, University of Alabama at Birmingham, Birmingham, AL 35294 (United States); Le, Long P. [Massachusetts General Hospital, Pathology Service, 55 Fruit St.-GRJ 249, Boston, MA 02114 (United States); Matthews, David A. [School of Cellular and Molecular Medicine, Medical Sciences Building, University of Bristol, Bristol BS8 1TD (United Kingdom); Curiel, David T., E-mail: dcuriel@radonc.wustl.edu [Division of Human Gene Therapy, Departments of Medicine, Obstetrics and Gynecology, Pathology, and Surgery, University of Alabama at Birmingham, Birmingham, AL 35294 (United States); The Gene Therapy Center, University of Alabama at Birmingham, Birmingham, AL 35294 (United States)

2012-10-25

Adenoviral infection induces nucleoplasmic redistribution of a nucleolar nucleophosmin 1/NPM1/B23.1. NPM1 is preferentially localized in the nucleoli of normal cells, whereas it is also present at the nuclear matrix in cancer cells. However, the biological roles of NPM1 during infection are unknown. Here, by analyzing a pV-deletion mutant, Ad5-dV/TSB, we demonstrate that pV promotes the NPM1 translocation from the nucleoli to the nucleoplasm in normal cells, and the NPM1 translocation is correlated with adenoviral replication. Lack of pV causes a dramatic reduction of adenoviral replication in normal cells, but not cancer cells, and Ad5-dV/TSB was defective in viral assembly in normal cells. NPM1 knockdown inhibits adenoviral replication, suggesting an involvement of NPM1 in adenoviral biology. Further, we show that NPM1 interacts with empty adenovirus particles which are an intermediate during virion maturation by immunoelectron microscopy. Collectively, these data implicate that pV participates in a process of viral assembly through NPM1.

Scalability of the LEU-Modified Cintichem Process: 3-MeV Van de Graaff and 35-MeV Electron Linear Accelerator Studies

Energy Technology Data Exchange (ETDEWEB)

Rotsch, David A. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Brossard, Tom [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Roussin, Ethan [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Quigley, Kevin [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Chemerisov, Sergey [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Gromov, Roman [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Jonah, Charles [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Hafenrichter, Lohman [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Tkac, Peter [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Krebs, John [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Vandegrift, George F. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division

2016-10-31

Molybdenum-99, the mother of Tc-99m, can be produced from fission of U-235 in nuclear reactors and purified from fission products by the Cintichem process, later modified for low-enriched uranium (LEU) targets. The key step in this process is the precipitation of Mo with α-benzoin oxime (ABO). The stability of this complex to radiation has been examined. Molybdenum-ABO was irradiated with 3 MeV electrons produced by a Van de Graaff generator and 35 MeV electrons produced by a 50 MeV/25 kW electron linear accelerator. Dose equivalents of 1.7–31.2 kCi of Mo-99 were administered to freshly prepared Mo-ABO. Irradiated samples of Mo-ABO were processed according to the LEU Modified-Cintichem process. The Van de Graaff data indicated good radiation stability of the Mo-ABO complex up to ~15 kCi dose equivalents of Mo-99 and nearly complete destruction at doses >24 kCi Mo-99. The linear accelerator data indicate that even at 6.2 kCi of Mo-99 equivalence of dose, the sample lost ~20% of Mo-99. The 20% loss of Mo-99 at this low dose may be attributed to thermal decomposition of the product from the heat deposited in the sample during irradiation.

Modeling of magnetic particle orientation in magnetic powder injection molding

Science.gov (United States)

Doo Jung, Im; Kang, Tae Gon; Seul Shin, Da; Park, Seong Jin

2018-03-01

The magnetic micro powder orientation under viscous shear flow has been analytically understood and characterized into a new analytical orientation model for a powder injection molding process. The effects of hydrodynamic force from the viscous flow, external magnetic force and internal dipole-dipole interaction were considered to predict the orientation under given process conditions. Comparative studies with a finite element method proved the calculation validity with a partial differential form of the model. The angular motion, agglomeration and magnetic chain formation have been simulated, which shows that the effect of dipole-dipole interaction among powders on the orientation state becomes negligible at a high Mason number condition and at a low λ condition (the ratio of external magnetic field strength and internal magnetic moment of powder). Our developed model can be very usefully employed in the process analysis and design of magnetic powder injection molding.

Breast Malignant Processes Echography at V. I. Lenin Hospital

International Nuclear Information System (INIS)

Tamayo Hernandez, Lissette; Aguilar Munnoz, Liliana; Estevez de la Torre, Elyanne; Ricardo Guerrero, Migdania; Rodriguez Infanzon, Olga; Hung Arroyo, Jose Manuel

2007-01-01

A descriptive and cross-sectional study was carried out in patients with a presumptive diagnosis of breast malignant processes . The patients came from the breast cancer consulting room at V. I. Lenin Hospital from January 2005 to December 2005. A breast ultrasound imaging was done aimed at deepening in the diagnosis which was predominant in pre- menopausal women , being the left breast external upper quadrant the most frequent site of localization. The most suggestive echography pattern of malignant processes was the image with changes in its echostructure, soft echos in its inner part and irregular edge were observed. According to the mammography results the most frequent presentation was the visualization of a thick breast of irregular edge with spicule formations. There was a diagnostic correspondence between the echogram and the mammography considering that this is an adequate method for the initial evaluation of breast malignant processes

Preliminary Evaluation on Characteristics of Waste from Pyro-processing (FS v5.1)

International Nuclear Information System (INIS)

Kim, In-Young; Choi, Heui-Joo

2016-01-01

In this study, characteristic of waste from pyro-processing which based on material balance FS v5.1 is evaluated for revising of A-KRS concept. To reduce volume and toxicity of PWR SNFs, the P and T Technology using pyro-processing and SFR is under development in KAERI. In accordance with this R and D, the A-KRS was developed by KAERI for disposal of waste from pyro-processing. After A-KRS concept development, material balance has been revised and characteristics of waste have been changed. To solve impending saturation of storage capacity of NPP sites, national policy on SNF management seems to be determined shortly. Demand on detailed analysis on impact of P and T using pyro-processing and SFR as base data is increasing. To compare direct disposal scenario to the P and T scenario using pyro-processing and SFR, updating of A-KRS reflecting amendment of material balance is required. In this study, characteristic of waste from pyro-processing which based on material balance FS v5.1 is evaluated. Every 15 types of outputs generated from pyro-processing are evaluated. Great reduction can be achieved by complete reuse of U/TRU/RE in SFR, because most of decay heat, radioactivity and radiotoxicity are generated from U/TRU/RE ingot. Within about 300 years, the fly ash filter containing Cs, Sr containing salt waste are important waste in perspective of decay heat and radioactivity. Importance of RE containing salt waste reduced. Management of hold-ups must be clarified because hold-ups take large portion of decay heat, radioactivity in the material balance FS v5.1

Preliminary Evaluation on Characteristics of Waste from Pyro-processing (FS v5.1)

Energy Technology Data Exchange (ETDEWEB)

Kim, In-Young; Choi, Heui-Joo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, characteristic of waste from pyro-processing which based on material balance FS v5.1 is evaluated for revising of A-KRS concept. To reduce volume and toxicity of PWR SNFs, the P and T Technology using pyro-processing and SFR is under development in KAERI. In accordance with this R and D, the A-KRS was developed by KAERI for disposal of waste from pyro-processing. After A-KRS concept development, material balance has been revised and characteristics of waste have been changed. To solve impending saturation of storage capacity of NPP sites, national policy on SNF management seems to be determined shortly. Demand on detailed analysis on impact of P and T using pyro-processing and SFR as base data is increasing. To compare direct disposal scenario to the P and T scenario using pyro-processing and SFR, updating of A-KRS reflecting amendment of material balance is required. In this study, characteristic of waste from pyro-processing which based on material balance FS v5.1 is evaluated. Every 15 types of outputs generated from pyro-processing are evaluated. Great reduction can be achieved by complete reuse of U/TRU/RE in SFR, because most of decay heat, radioactivity and radiotoxicity are generated from U/TRU/RE ingot. Within about 300 years, the fly ash filter containing Cs, Sr containing salt waste are important waste in perspective of decay heat and radioactivity. Importance of RE containing salt waste reduced. Management of hold-ups must be clarified because hold-ups take large portion of decay heat, radioactivity in the material balance FS v5.1.

Arthroscopically assisted stabilization of acute high-grade acromioclavicular joint separations in a coracoclavicular Double-TightRope technique: V-shaped versus parallel drill hole orientation.

Science.gov (United States)

Kraus, Natascha; Haas, Norbert P; Scheibel, Markus; Gerhardt, Christian

2013-10-01

The arthroscopically assisted Double-TightRope technique has recently been reported to yield good to excellent clinical results in the treatment of acute, high-grade acromioclavicular dislocation. However, the orientation of the transclavicular-transcoracoidal drill holes remains a matter of debate. A V-shaped drill hole orientation leads to better clinical and radiologic results and provides a higher vertical and horizontal stability compared to parallel drill hole placement. This was a cohort study; level of evidence, 2b. Two groups of patients with acute high-grade acromioclavicular joint instability (Rockwood type V) were included in this prospective, non-randomized cohort study. 15 patients (1 female/14 male) with a mean age of 37.7 (18-66) years were treated with a Double-TightRope technique using a V-shaped orientation of the drill holes (group 1). 13 patients (1 female/12 male) with a mean age of 40.9 (21-59) years were treated with a Double-TightRope technique with a parallel drill hole placement (group 2). After 2 years, the final evaluation consisted of a complete physical examination of both shoulders, evaluation of the Subjective Shoulder Value (SSV), Constant Score (CS), Taft Score (TF) and Acromioclavicular Joint Instability Score (ACJI) as well as a radiologic examination including bilateral anteroposterior stress views and bilateral Alexander views. After a mean follow-up of 2 years, all patients were free of shoulder pain at rest and during daily activities. Range of motion did not differ significantly between both groups (p > 0.05). Patients in group 1 reached on average 92.4 points in the CS, 96.2 % in the SSV, 10.5 points in the TF and 75.9 points in the ACJI. Patients in group 2 scored 90.5 points in the CS, 93.9 % in the SSV, 10.5 points in the TF and 84.5 points in the ACJI (p > 0.05). Radiographically, the coracoclavicular distance was found to be 13.9 mm (group 1) and 13.4 mm (group 2) on the affected side and 9.3 mm (group 1

An evaluation of the process used to determine life orientation moderation in school based asssessments for Grade twelve

OpenAIRE

2013-01-01

M. Ed. (Higher Education) This study seeks to evaluate the processes used in the moderation of School-based Assessment (SBA) in Life Orientation (LO). This subject has been introduced by the Department of Education (DoE) to form part of Grade 12 exit examinations the National Curriculum Statement (NCS). SBA refers to all assessment that is conducted by teachers, and sometimes is known as internal assessment, coursework or continuous assessment...

APPLICATION FRAMEWORK IN ENGINEERING SERVICE ORIENTED ARCHITECTURE SYSTEM SERVICE

Directory of Open Access Journals (Sweden)

Ade Hodijah

2017-03-01

Full Text Available The Service Engineering (SE is understood as a framework to create innovative services in application development of information technology approach to Service Oriented Architecture (SOA. Implementing SOA is required methodology to identify services that can be used again in the application and organization of a company. in this research, software development model used is object-oriented methodologies, SOA itself is a collection consisting of tools, technologies, frameworks, and best practices that facilitate the implementation of a service quickly. in a study this uses the tools of Business Process Management System (BPMS to support the implementation of service-oriented software. the purpose of this study is to produce a model of activities and artifacts of the application software development models of the SE with a case study Rate Loans. Validation to the design of the model is done through testing of the software produced. The results showed that the application of the SE in the development of service-oriented software can use the object-oriented methodology by providing additional value-added analysis and redesign of business processes to be implemented on a BPMS. BPMS usage of the application of the SE on the SOA has the advantage of visualization in the management of business processes.

Vanadium K XANES of synthetic olivine: Valence determinations and crystal orientation effects

International Nuclear Information System (INIS)

Sutton, S.R.; Newville, M.

2005-01-01

Vanadium can exist in a large number of valence states in nature (2+?, 3+, 4+ and 5+) and determinations of V valence is therefore valuable in defining the oxidation states of earth and planetary materials over a large redox range. Synchrotron-based x-ray absorption near edge structure (XANES) spectroscopy is well-suited for measurements of V valence with ∼micrometer spatial resolution and ∼ppm elemental sensitivity. Applications of microXANES have been demonstrated for basaltic glasses. Applications to minerals are feasible but complicated by orientation effects (e.g. due to polarization of the synchrotron x-ray beam) and some results for spinel have been reported. Here we report initial results for olivine from laboratory crystallization ex-periments. The goal is to define the valence partition-ing between olivine and melt and quantify the magnitude of orientation effects, the latter tested by measuring grains at a variety of orientations in the same charge.

Anisotropic propagation imaging of elastic waves in oriented columnar thin films

Science.gov (United States)

Coffy, E.; Dodane, G.; Euphrasie, S.; Mosset, A.; Vairac, P.; Martin, N.; Baida, H.; Rampnoux, J. M.; Dilhaire, S.

2017-12-01

We report on the observation of strongly anisotropic surface acoustic wave propagation on nanostructured thin films. Two kinds of tungsten samples were prepared by sputtering on a silicon substrate: a conventional thin film with columns normal to the substrate surface, and an oriented columnar architecture using the glancing angle deposition (GLAD) process. Pseudo-Rayleigh waves (PRWs) were imaged as a function of time in x and y directions for both films thanks to a femtosecond heterodyne pump-probe setup. A strong anisotropic propagation as well as a high velocity reduction of the PRWs were exhibited for the GLAD sample. For the wavevector k/2π  =  3  ×  105 m-1 the measured group velocities v x and v y equal 2220 m s-1 for the sample prepared with conventional sputtering, whereas a strong anisotropy appears (v x   =  1600 m s-1 and v y   =  870 m s-1) for the sample prepared with the GLAD process. Using the finite element method, the anisotropy is related to the structural anisotropy of the thin film’s architecture. The drop of PRWs group velocities is mainly assigned to the porous microstructure, especially favored by atomic shadowing effects which appear during the growth of the inclined columns. Such GLAD thin films constitute a new tool for the control of the propagation of surface elastic waves and for the design of new devices with useful properties.

Impacting student anxiety for the USMLE Step 1 through process-oriented preparation

Directory of Open Access Journals (Sweden)

Roy E. Strowd

2010-02-01

Full Text Available Background: Standardized examinations are the key components of medical education. The USMLE Step 1 is the first of these important milestones. Success on this examination requires both content competency and efficient strategies for study and review. Students employ a wide variety of techniques in studying for this examination, with heavy reliance on personal study habits and advice from other students. Nevertheless, few medical curricula formally address these strategies. Methods: In response to student-generated critique at our institution, a five-part seminar series on process-oriented preparation was developed and implemented to address such concerns. The series focused on early guidance and preparation strategies for Step 1 and the many other important challenges in medical school. Emphasis was placed on facilitating conversation and mentorship opportunities between students. Results & Conclusions: A profoundly positive experience was reported by our medical students that included a decreased anxiety level for the Step 1 examination.

FUTURE SHIP ENGINEERS’ TRAINING BY MEANS OF PROFESSIONALLY ORIENTED DISCIPLINES

Directory of Open Access Journals (Sweden)

Уляна Ляшенко

2015-12-01

Full Text Available The article represents the problem of future ship engineers’ training by means of professionally oriented disciplines. This paper focuses on the effectiveness of future specialists’ training in case of implementation the author’s methods in the educational process of teaching (based on competence, person-oriented, module-rating, technological, activity, communicative approaches in accordance with cognitive-enriching, reproductive-activity and professional-creative stages. Leading principles of teaching(scientific approach, systematic and sequence approach, accessibility, conscious approach and activity, connection with life, individual approach and corresponding pedagogical conditions (implementation of holistic integrated approach while teaching professionally oriented disciplines; positive motivation of cadets’ professional interest through the contents, forms and means of educational activity of marine engineers’ professional training are defined; functioning mechanisms of interdisciplinary integration in the process of studying professionally oriented disciplines are disclosed. The author of the article grounds the purposefulness of implementation of the mentioned author’s methods in educational process as it will make the process of ship engineers’ professional training more effective and will allow to use the acquired professional knowledge and in the future professional activity.

Impact of Youth Cultural Orientation on Perception of Family Process and Development among Korean Americans

Science.gov (United States)

Choi, Yoonsun; Kim, Tae Yeun; Pekelnicky, Dina Drankus; Kim, Kihyun; Kim, You Seung

2016-01-01

Objectives This study examined how cultural orientations influence youth perception of family processes in Korean American families, and how these family processes in turn predict depressive symptoms and antisocial behaviors among youth. Family processes were examined separately for maternal and paternal variables. Methods This study used survey data from Korean American families living in the Midwest (256 youth and their parents) across two time periods, spanned over a year. At the time of the first interview, the average age of youth was 13 (SD=1.00). Using Structural Equation Modeling, this study tested the hypothesized associations concurrently, longitudinally, and accounting for earlier outcomes. Results and Conclusion Results show that identity and behavioral enculturation in one’s heritage culture are predictors of bonding with parents, which is notably protective for youth. The results highlight the critical effect of enculturation in enhancing youth perception of the parent-child relationship. Behavioral acculturation to mainstream culture, in contrast, predicts youth problems, although the effect may not necessarily always be via family processes. Similarly, Korean and English language proficiencies predict fewer youth problems, but not always by way of family processes. A few differences emerged across maternal and paternal variables, although there was much commonality in the hypothesized relationships. PMID:27429061

Impact of youth cultural orientation on perception of family process and development among Korean Americans.

Science.gov (United States)

Choi, Yoonsun; Kim, Tae Yeun; Pekelnicky, Dina Drankus; Kim, Kihyun; Kim, You Seung

2017-04-01

This study examined how cultural orientations influence youth perception of family processes in Korean American families and how these family processes, in turn, predict depressive symptoms and antisocial behaviors among youth. Family processes were examined separately for maternal and paternal variables. This study used survey data from Korean American families living in the Midwest (256 youth and their parents) across 2 time periods, spanned over a year. At the time of the first interview, the average age of youth was 13 (SD = 1.00). Using structural equation modeling, this study tested the hypothesized associations concurrently, longitudinally, and accounting for earlier outcomes. Results show that identity and behavioral enculturation in one's heritage culture are predictors of bonding with parents, which is notably protective for youth. The results highlight the critical effect of enculturation in enhancing youth perception of the parent-child relationship. Behavioral acculturation to mainstream culture, in contrast, predicts youth problems, although the effect may not necessarily always be via family processes. Similarly, Korean and English language proficiencies predict fewer youth problems, but not always by way of family processes. A few differences emerged across maternal and paternal variables, although there was much commonality in the hypothesized relationships. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Electrical performance of conducting polymer (SPAN) grown on GaAs with different substrate orientations

Science.gov (United States)

Jameel, D. A.; Aziz, M.; Felix, J. F.; Al Saqri, N.; Taylor, D.; Albalawi, H.; Alghamdi, H.; Al Mashary, F.; Henini, M.

2016-11-01

This article reports the effect of n-type GaAs substrate orientation, namely (100), (311)A and (311)B, on the electrical properties of sulfonated polyaniline (SPAN)/GaAs heterojunction devices. In addition, the inhomogeneity of the interface between various GaAs substrates and SPAN is investigated in terms of barrier height and ideality factor by performing I-V measurements at different temperatures (20-420 K). The I-V results indicate that the value of the rectification ratio (IF/IR) at 0.5 V is higher for SPAN/(311)B GaAs samples than for SPAN/(100) GaAs and SPAN/(311)A GaAs samples. Moreover, the barrier height decreases and the ideality factor increases with decreasing temperature for all three heterostructure devices. The high value of mean barrier Φbarb of SPAN/(311)B (calculated from the plots of Φb 0 as a function of 1/2kT) confirms that the GaAs substrate orientation results in an increase of barrier homogeneities. Furthermore, the C-V characteristics were obtained at room temperature. The C-V measurements showed that the carrier distributions at the interface and away from the interface in high index (311) GaAs orientations are more uniform and have better barrier homogeneity than those grown on the conventional (100) GaAs substrates.

On the orientation of stripes in fish skin patterning.

Science.gov (United States)

Míguez, David G; Muñuzuri, Alberto P

2006-11-20

This paper is focused on the study of the stripes orientation in the fish skin patterns. Based on microscopic observations of the pigment cells behavior at the embryonic stage, the key aspects of the pigmentation process are implemented in an experimental reaction-diffusion system. The experiment consists of a photosensitive Turing pattern of stripes growing directionally in one direction with controlled velocity. Different growth velocities of the system rearrange the stripes in the same three possible orientations observed in the skin of the colored fishes: parallel, oblique, and perpendicular. Our results suggest that the spreading velocity of the pigment cells in the fish dermis selects the orientation in the patterning processes.

Effects of annealing schedule on orientation of Bi3.2Nd0.8Ti3O12 ferroelectric film prepared by chemical solution deposition process

International Nuclear Information System (INIS)

He, H.Y.; Huang, J.F.; Cao, L.Y.; Wang, L.S.

2006-01-01

Fatigue-free Bi 3.2 Nd 0.8 Ti 3 O 12 ferroelectric thin films were successfully prepared on p-Si(1 1 1) substrate using chemical solution deposition process. The orientation and formation of thin film under different annealing schedules were studied. XRD analysis indicated that (2 0 0)-oriented films with degree of orientation of I (200) /I (117) = 2.097 and 0.466 were obtained by preannealing for 10 min at 400 deg. C followed by rapid thermal annealing for 3, 10 and 20 min at 700 deg. C, respectively (0 0 8)-oriented films with degree of orientation of I (008) /I (117) = 1.706 were obtained by rapid thermal annealing for 3 min at 700 deg. C without preannealing, and (0 0 8)-oriented films with degree of orientation of I (008) /I (117) = 0.719 were obtained by preheating the film from room temperature at 20 deg. C/min followed by annealing for 10 min at 700 deg. C. The a-axis and c-axis orientation decreased as increase of annealing time due to effects of (1 1 1)-oriented substrate. AFM analysis further indicated that preannealing at 400 deg. C for 10 min followed by rapid thermal annealing for 3 min at 700 deg. C resulted in formation of platelike crystallite parallel to substrate surface, however rapid thermal annealing for 3 min at 700 deg. C without preannealing resulted in columnar crystallite perpendicular to substrate surface

Measuring Filament Orientation: A New Quantitative, Local Approach

Energy Technology Data Exchange (ETDEWEB)

Green, C.-E.; Cunningham, M. R.; Jones, P. A. [School of Physics, University of New South Wales, Sydney, NSW, 2052 (Australia); Dawson, J. R. [CSIRO Astronomy and Space Science, Australia Telescope National Facility, P.O. Box 76, Epping, NSW 1710 (Australia); Novak, G. [Center for Interdisciplinary Exploration and Research in Astrophysics (CIERA) and Department of Physics and Astronomy, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Fissel, L. M. [National Radio Astronomy Observatory (NRAO), 520 Edgemont Road, Charlottesville, VA, 22903 (United States)

2017-09-01

The relative orientation between filamentary structures in molecular clouds and the ambient magnetic field provides insight into filament formation and stability. To calculate the relative orientation, a measurement of filament orientation is first required. We propose a new method to calculate the orientation of the one-pixel-wide filament skeleton that is output by filament identification algorithms such as filfinder. We derive the local filament orientation from the direction of the intensity gradient in the skeleton image using the Sobel filter and a few simple post-processing steps. We call this the “Sobel-gradient method.” The resulting filament orientation map can be compared quantitatively on a local scale with the magnetic field orientation map to then find the relative orientation of the filament with respect to the magnetic field at each point along the filament. It can also be used for constructing radial profiles for filament width fitting. The proposed method facilitates automation in analyses of filament skeletons, which is imperative in this era of “big data.”.

Measuring Filament Orientation: A New Quantitative, Local Approach

Science.gov (United States)

Green, C.-E.; Dawson, J. R.; Cunningham, M. R.; Jones, P. A.; Novak, G.; Fissel, L. M.

2017-09-01

The relative orientation between filamentary structures in molecular clouds and the ambient magnetic field provides insight into filament formation and stability. To calculate the relative orientation, a measurement of filament orientation is first required. We propose a new method to calculate the orientation of the one-pixel-wide filament skeleton that is output by filament identification algorithms such as filfinder. We derive the local filament orientation from the direction of the intensity gradient in the skeleton image using the Sobel filter and a few simple post-processing steps. We call this the “Sobel-gradient method.” The resulting filament orientation map can be compared quantitatively on a local scale with the magnetic field orientation map to then find the relative orientation of the filament with respect to the magnetic field at each point along the filament. It can also be used for constructing radial profiles for filament width fitting. The proposed method facilitates automation in analyses of filament skeletons, which is imperative in this era of “big data.”

Measuring Filament Orientation: A New Quantitative, Local Approach

International Nuclear Information System (INIS)

Green, C.-E.; Cunningham, M. R.; Jones, P. A.; Dawson, J. R.; Novak, G.; Fissel, L. M.

2017-01-01

The relative orientation between filamentary structures in molecular clouds and the ambient magnetic field provides insight into filament formation and stability. To calculate the relative orientation, a measurement of filament orientation is first required. We propose a new method to calculate the orientation of the one-pixel-wide filament skeleton that is output by filament identification algorithms such as filfinder. We derive the local filament orientation from the direction of the intensity gradient in the skeleton image using the Sobel filter and a few simple post-processing steps. We call this the “Sobel-gradient method.” The resulting filament orientation map can be compared quantitatively on a local scale with the magnetic field orientation map to then find the relative orientation of the filament with respect to the magnetic field at each point along the filament. It can also be used for constructing radial profiles for filament width fitting. The proposed method facilitates automation in analyses of filament skeletons, which is imperative in this era of “big data.”

Orientation-Selective Retinal Circuits in Vertebrates.

Science.gov (United States)

Antinucci, Paride; Hindges, Robert

2018-01-01

Visual information is already processed in the retina before it is transmitted to higher visual centers in the brain. This includes the extraction of salient features from visual scenes, such as motion directionality or contrast, through neurons belonging to distinct neural circuits. Some retinal neurons are tuned to the orientation of elongated visual stimuli. Such 'orientation-selective' neurons are present in the retinae of most, if not all, vertebrate species analyzed to date, with species-specific differences in frequency and degree of tuning. In some cases, orientation-selective neurons have very stereotyped functional and morphological properties suggesting that they represent distinct cell types. In this review, we describe the retinal cell types underlying orientation selectivity found in various vertebrate species, and highlight their commonalities and differences. In addition, we discuss recent studies that revealed the cellular, synaptic and circuit mechanisms at the basis of retinal orientation selectivity. Finally, we outline the significance of these findings in shaping our current understanding of how this fundamental neural computation is implemented in the visual systems of vertebrates.

Parent-identified barriers to pediatric health care: a process-oriented model.

Science.gov (United States)

Sobo, Elisa J; Seid, Michael; Reyes Gelhard, Leticia

2006-02-01

To further understand barriers to care as experienced by health care consumers, and to demonstrate the importance of conjoining qualitative and quantitative health services research. Transcripts from focus groups conducted in San Diego with English- and Spanish-speaking parents of children with special health care needs. Participants were asked about the barriers to care they had experienced or perceived, and their strategies for overcoming these barriers. Using elementary anthropological discourse analysis techniques, a process-based conceptual model of the parent experience was devised. The analysis revealed a parent-motivated model of barriers to care that enriched our understanding of quantitative findings regarding the population from which the focus group sample was drawn. Parent-identified barriers were grouped into the following six temporally and spatially sequenced categories: necessary skills and prerequisites for gaining access to the system; realizing access once it is gained; front office experiences; interactions with physicians; system arbitrariness and fragmentation; outcomes that affect future interaction with the system. Key to the successful navigation of the system was parents' functional biomedical acculturation; this construct likens the biomedical health services system to a cultural system within which all parents/patients must learn to function competently. Qualitative analysis of focus group data enabled a deeper understanding of barriers to care--one that went beyond the traditional association of marker variables with poor outcomes ("what") to reveal an understanding of the processes by which parents experience the health care system ("how,"why") and by which disparities may arise. Development of such process-oriented models furthers the provision of patient-centered care and the creation of interventions, programs, and curricula to enhance such care. Qualitative discourse analysis, for example using this project's widely applicable

Donor/Acceptor Molecular Orientation-Dependent Photovoltaic Performance in All-Polymer Solar Cells.

Science.gov (United States)

Zhou, Ke; Zhang, Rui; Liu, Jiangang; Li, Mingguang; Yu, Xinhong; Xing, Rubo; Han, Yanchun

2015-11-18

The correlated donor/acceptor (D/A) molecular orientation plays a crucial role in solution-processed all-polymer solar cells in term of photovoltaic performance. For the conjugated polymers PTB7-th and P(NDI2OD-T2), the preferential molecular orientation of neat PTB7-th films kept face-on regardless of the properties of processing solvents. However, an increasing content of face-on molecular orientation in the neat P(NDI2OD-T2) films could be found by changing processing solvents from chloronaphthalene (CN) and o-dichlorobenzene (oDCB) to chlorobenzene (CB). Besides, the neat P(NDI2OD-T2) films also exhibited a transformation of preferential molecular orientation from face-on to edge-on when extending film drying time by casting in the same solution. Consequently, a distribution diagram of molecular orientation for P(NDI2OD-T2) films was depicted and the same trend could be observed for the PTB7-th/P(NDI2OD-T2) blend films. By manufacture of photovoltaic devices with blend films, the relationship between the correlated D/A molecular orientation and device performance was established. The short-circuit current (Jsc) of devices processed by CN, oDCB, and CB enhanced gradually from 1.24 to 8.86 mA/cm(2) with the correlated D/A molecular orientation changing from face-on/edge-on to face-on/face-on, which could be attributed to facile exciton dissociation at D/A interface with the same molecular orientation. Therefore, the power conversion efficiency (PCE) of devices processed by CN, oDCB, and CB improved from 0.53% to 3.52% ultimately.

FULLY AUTOMATED IMAGE ORIENTATION IN THE ABSENCE OF TARGETS

Directory of Open Access Journals (Sweden)

C. Stamatopoulos

2012-07-01

Full Text Available Automated close-range photogrammetric network orientation has traditionally been associated with the use of coded targets in the object space to allow for an initial relative orientation (RO and subsequent spatial resection of the images. Over the past decade, automated orientation via feature-based matching (FBM techniques has attracted renewed research attention in both the photogrammetry and computer vision (CV communities. This is largely due to advances made towards the goal of automated relative orientation of multi-image networks covering untargetted (markerless objects. There are now a number of CV-based algorithms, with accompanying open-source software, that can achieve multi-image orientation within narrow-baseline networks. From a photogrammetric standpoint, the results are typically disappointing as the metric integrity of the resulting models is generally poor, or even unknown, while the number of outliers within the image matching and triangulation is large, and generally too large to allow relative orientation (RO via the commonly used coplanarity equations. On the other hand, there are few examples within the photogrammetric research field of automated markerless camera calibration to metric tolerances, and these too are restricted to narrow-baseline, low-convergence imaging geometry. The objective addressed in this paper is markerless automatic multi-image orientation, maintaining metric integrity, within networks that incorporate wide-baseline imagery. By wide-baseline we imply convergent multi-image configurations with convergence angles of up to around 90°. An associated aim is provision of a fast, fully automated process, which can be performed without user intervention. For this purpose, various algorithms require optimisation to allow parallel processing utilising multiple PC cores and graphics processing units (GPUs.

Compete or Leapfrog: Creating Blue Ocean through Entrepreneurial Orientation

OpenAIRE

Arslan Ayub; Muhammad Salman Aslam; Hanan Iftekhar; Adeel Razzaq; Sabiha Hafeez

2013-01-01

The study analyzes the role of entrepreneurial orientation with mediating effect of knowledge creation process to creating Blue Ocean in corporate sector in Pakistan There is an increasing competition among companies due to globalization and technological advancements. Thus, it requires a study to measure the multifaceted influence of entrepreneurial orientation on knowledge creation process and Blue Ocean besides the actual paradigm of this terminology. This concept has been well discussed i...

Die design and process optimization of die cast V6 engine blocks

Directory of Open Access Journals (Sweden)

Henry Hu

2005-02-01

Full Text Available The use of aluminum, particularly for engine blocks, has grown considerably in the past ten years, and continues to rise in the automotive industry. In order to enhance the quality and engineering functionality of die cast engine blocks, die design and processes have to be optimized. In this study, a computer simulation software, MAGMAsoft, as an advanced tool for optimizing die design and casting process, was emplooyed to virtually visualize cavity filling and patterns of a V6 engine block. The original die design and process was simulated first to establish a baseline. A reality check was used to verify the predicted results. Then, the die modification with a different unner system was made by using a CAD software, Unigraphics (UG. The simulation on combinations of the modified die design and revised process was performed to examine the effect of die modification and process change on flow filling of V6 engine blocks. The simulated prediction indicateds that the enhancement of cavity filling due to the die and process modification minimizeds the occurrence of defects during casting, and consequently improves the quality of blocks. The results of mechanical testing show a significant increase in fatigue strengths, and a moderately improvement on tensile properties for the blocks die cast with the new die design and prpocess in comparison with those produced by the original ones.

Relationship between BOLD amplitude and pattern classification of orientation-selective activity in the human visual cortex

Science.gov (United States)

Tong, Frank; Harrison, Stephenie A.; Dewey, John A.; Kamitani, Yukiyasu

2012-01-01

Orientation-selective responses can be decoded from fMRI activity patterns in the human visual cortex, using multivariate pattern analysis (MVPA). To what extent do these feature-selective activity patterns depend on the strength and quality of the sensory input, and might the reliability of these activity patterns be predicted by the gross amplitude of the stimulus-driven BOLD response? Observers viewed oriented gratings that varied in luminance contrast (4, 20 or 100%) or spatial frequency (0.25, 1.0 or 4.0 cpd). As predicted, activity patterns in early visual areas led to better discrimination of orientations presented at high than low contrast, with greater effects of contrast found in area V1 than in V3. A second experiment revealed generally better decoding of orientations at low or moderate as compared to high spatial frequencies. Interestingly however, V1 exhibited a relative advantage at discriminating high spatial frequency orientations, consistent with the finer scale of representation in the primary visual cortex. In both experiments, the reliability of these orientation-selective activity patterns was well predicted by the average BOLD amplitude in each region of interest, as indicated by correlation analyses, as well as decoding applied to a simple model of voxel responses to simulated orientation columns. Moreover, individual differences in decoding accuracy could be predicted by the signal-to-noise ratio of an individual's BOLD response. Our results indicate that decoding accuracy can be well predicted by incorporating the amplitude of the BOLD response into simple simulation models of cortical selectivity; such models could prove useful in future applications of fMRI pattern classification. PMID:22917989

The impact of recreational MDMA 'ecstasy' use on global form processing.

Science.gov (United States)

White, Claire; Edwards, Mark; Brown, John; Bell, Jason

2014-11-01

The ability to integrate local orientation information into a global form percept was investigated in long-term ecstasy users. Evidence suggests that ecstasy disrupts the serotonin system, with the visual areas of the brain being particularly susceptible. Previous research has found altered orientation processing in the primary visual area (V1) of users, thought to be due to disrupted serotonin-mediated lateral inhibition. The current study aimed to investigate whether orientation deficits extend to higher visual areas involved in global form processing. Forty-five participants completed a psychophysical (Glass pattern) study allowing an investigation into the mechanisms underlying global form processing and sensitivity to changes in the offset of the stimuli (jitter). A subgroup of polydrug-ecstasy users (n=6) with high ecstasy use had significantly higher thresholds for the detection of Glass patterns than controls (n=21, p=0.039) after Bonferroni correction. There was also a significant interaction between jitter level and drug-group, with polydrug-ecstasy users showing reduced sensitivity to alterations in jitter level (p=0.003). These results extend previous research, suggesting disrupted global form processing and reduced sensitivity to orientation jitter with ecstasy use. Further research is needed to investigate this finding in a larger sample of heavy ecstasy users and to differentiate the effects of other drugs. © The Author(s) 2014.

Structure, deformation, and failure of flow-oriented semicrystalline polymers

NARCIS (Netherlands)

Schrauwen, B.A.G.; Breemen, van L.C.A.; Spoelstra, A.B.; Govaert, L.E.; Peters, G.W.M.; Meijer, H.E.H.

2004-01-01

This study deals with the influence of processing induced crystalline orientation on the macroscopic deformation and failure behavior of thin samples of polyethylene and polypropylene. Distribution and structure of flow-induced orientations were characterized by optical microscopy, X-ray diffraction

Object oriented programming in simulation of ions transport

International Nuclear Information System (INIS)

Zhang Wenyong; Wang Tongquan; Xiao Yabin; Dai Hongyi; Chen Yuzhong

2001-01-01

Using Object Oriented Programming (OOP) method can make our program more reliable and easier to read, debug, maintain and upgrade. This paper compared FORTRAN90-the language widely used in science computing with C ++ --An Object Oriented Language, and the conclusion was made that although FORTRAN90 have many deficiencies, it can be used in Object Oriented programming. Then OOP method was used in programming of Monte Carlo simulation of ions transport and the general process of OOP was given

Fathers' Orientation to their Children's Autism Diagnosis: A Grounded Theory Study.

Science.gov (United States)

Hannon, Michael D; Hannon, LaChan V

2017-07-01

Sixteen fathers of individuals with autism were interviewed to develop a grounded theory explaining how they learned about their children's autism diagnosis. Results suggest the orientation process entails at least two phases: orienting oneself and orienting others. The orienting oneself phase entailed fathers having suspicion of developmental differences, engaging in research and education activities, having their children formally evaluated; inquiring about their children's prognosis, and having curiosities about autism's etiology. The orienting others phase entailed orientating family members and orienting members of their broader communities. Recommendations for responsive service provision, support for fathers, and future research are offered.

Integration of the Gene Ontology into an object-oriented architecture

Directory of Open Access Journals (Sweden)

Zheng W Jim

2005-05-01

Full Text Available Abstract Background To standardize gene product descriptions, a formal vocabulary defined as the Gene Ontology (GO has been developed. GO terms have been categorized into biological processes, molecular functions, and cellular components. However, there is no single representation that integrates all the terms into one cohesive model. Furthermore, GO definitions have little information explaining the underlying architecture that forms these terms, such as the dynamic and static events occurring in a process. In contrast, object-oriented models have been developed to show dynamic and static events. A portion of the TGF-beta signaling pathway, which is involved in numerous cellular events including cancer, differentiation and development, was used to demonstrate the feasibility of integrating the Gene Ontology into an object-oriented model. Results Using object-oriented models we have captured the static and dynamic events that occur during a representative GO process, "transforming growth factor-beta (TGF-beta receptor complex assembly" (GO:0007181. Conclusion We demonstrate that the utility of GO terms can be enhanced by object-oriented technology, and that the GO terms can be integrated into an object-oriented model by serving as a basis for the generation of object functions and attributes.

Analysis and modeling of wafer-level process variability in 28 nm FD-SOI using split C-V measurements

Science.gov (United States)

Pradeep, Krishna; Poiroux, Thierry; Scheer, Patrick; Juge, André; Gouget, Gilles; Ghibaudo, Gérard

2018-07-01

This work details the analysis of wafer level global process variability in 28 nm FD-SOI using split C-V measurements. The proposed approach initially evaluates the native on wafer process variability using efficient extraction methods on split C-V measurements. The on-wafer threshold voltage (VT) variability is first studied and modeled using a simple analytical model. Then, a statistical model based on the Leti-UTSOI compact model is proposed to describe the total C-V variability in different bias conditions. This statistical model is finally used to study the contribution of each process parameter to the total C-V variability.

Seamless-merging-oriented parallel inverse lithography technology

International Nuclear Information System (INIS)

Yang Yiwei; Shi Zheng; Shen Shanhu

2009-01-01

Inverse lithography technology (ILT), a promising resolution enhancement technology (RET) used in next generations of IC manufacture, has the capability to push lithography to its limit. However, the existing methods of ILT are either time-consuming due to the large layout in a single process, or not accurate enough due to simply block merging in the parallel process. The seamless-merging-oriented parallel ILT method proposed in this paper is fast because of the parallel process; and most importantly, convergence enhancement penalty terms (CEPT) introduced in the parallel ILT optimization process take the environment into consideration as well as environmental change through target updating. This method increases the similarity of the overlapped area between guard-bands and work units, makes the merging process approach seamless and hence reduces hot-spots. The experimental results show that seamless-merging-oriented parallel ILT not only accelerates the optimization process, but also significantly improves the quality of ILT.

Rationale for Spiritually Oriented Cognitive Processing Therapy for Moral Injury in Active Duty Military and Veterans With Posttraumatic Stress Disorder.

Science.gov (United States)

Koenig, Harold G; Boucher, Nathan A; Oliver, Rev John P; Youssef, Nagy; Mooney, Scott R; Currier, Joseph M; Pearce, Michelle

2017-02-01

Wartime experiences have long been known to cause ethical conflict, guilt, self-condemnation, difficulty forgiving, loss of trust, lack of meaning and purpose, and spiritual struggles. "Moral injury" (MI) (also sometimes called "inner conflict") is the term used to capture this emotional, cognitive, and behavioral state. In this article, we provide rationale for developing and testing Spiritually Oriented Cognitive Processing Therapy, a version of standard cognitive processing therapy for the treatment of MI in active duty and veteran service members (SMs) with posttraumatic stress disorder symptoms who are spiritual or religious (S/R). Many SMs have S/R beliefs that could increase vulnerability to MI. Because the injury is to deeply held moral standards and ethical values and often adversely affects spiritual beliefs and worldview, we believe that those who are S/R will respond more favorably to a therapy that directly targets this injury from a spiritually oriented perspective. An evidence-based treatment for MI in posttraumatic stress disorder that not only respects but also utilizes SMs' spiritual beliefs/behaviors may open the door to treatment for many S/R military personnel.