Projection of greenhouse gas emissions 2007 to 2025

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Ole-Kenneth; Winther, M.; Hjorth Mikkelsen, M.; Gyldenkaerne, S.; Lyck, E.; Plejdrup, M.; Hoffmann, L.; Thomsen, Marianne; Fauser, P.

2009-02-15

This report contains a description of models and background data for projection of CO{sub 2}, CH{sub 4}, N{sub 2}O, HFCs, PFCs and SF{sub 6} for Denmark. The emissions are projected to 2025 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts of activity rates are used in the models for those sectors for which the forecasts are available, i.e. the latest official forecast from the Danish Energy Agency. The emission factors refer to international guidelines and some are country-specific and refer to Danish legislation, Danish research reports or calculations based on emission data from a considerable number of plants. The projection models are based on the same structure and method as the Danish emission inventories in order to ensure consistency. (au)

Projection of greenhouse gas emissions - 2005 to 2030

Energy Technology Data Exchange (ETDEWEB)

Illerup, J.B.; Nielsen, Ole-Kenneth; Winther, Morten; Hjort Mikekkelsen, M.; Lyck, E.; Nielsen, Malene; Hoffmann, L.; Gyldenkaerne, S.; Thomsen, Marianne [DMU-AU, Dept. of Policy Analysis (Denmark)

2007-01-15

This report contains a description of models and background data for projection of CO{sub 2}, CH{sub 4}, N{sub 2}O, HFCs, PFCs and SF{sub 6} for Denmark. The emissions are projected to 2030 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts of activity rates are used in the models for those sectors for which the forecasts are available, i.e. the latest official forecast from the Danish Energy Authority. The emission factors refer to international guidelines and some are country-specific and refer to Danish legislation, Danish research reports or calculations based on emission data from a considerable number of plants. The projection models are based on the same structure and method as the Danish emission inventories in order to ensure consistency. (au)

Lifecycle GHG emissions of palm biodiesel: Unintended market effects negate direct benefits of the Malaysian Economic Transformation Plan (ETP)

International Nuclear Information System (INIS)

Abdul-Manan, Amir F.N.

2017-01-01

Biodiesel expansion can lead to unintended effects that offset the direct GHG benefits of biofuels. Two documented unintended effects are the indirect land use change (ILUC) and indirect energy use change (IEUC). ILUC has been included in many lifecycle GHG studies of biofuels, but IEUC has remained relatively elusive. This paper presents an updated assessment of the lifecycle GHG emissions of palm biodiesel from Malaysia and, for the first time, incorporating the two estimated indirect effects simultaneously. Future GHG emissions of palm biodiesel are projected by taking into account of Malaysia's Economic Transformation Programme (ETP) that aims to reform the oil palm industry in order to achieve a high-income nation. Uncertainties associated with lifecycle GHG models were dealt with using Monte Carlo simulation in order to identify the breadth and likelihood of GHG reductions relative to petroleum-based fuels in the context of the European directives. This study has shown that the ETP, if successfully implemented, can significantly improve the direct GHG emissions of palm biodiesel, but the benefits are offset by the rise in global emissions due to ILUC and IEUC. Biofuel policies should also include IEUC, in addition to ILUC, to avoid GHG emissions leakages. - Highlights: • Estimate current and future lifecycle GHG emissions of Malaysian palm biodiesel. • Evaluate the GHG effects of Malaysia's Economic Transformation Plan (ETP). • Direct GHG benefits of biodiesel offset by indirect market effects. • Palm biodiesel unlikely to enable global GHG emissions reductions. • Global biofuel policy must account for indirect effects.

Linking project-based mechanisms with domestic greenhouse gas emissions trading schemes

International Nuclear Information System (INIS)

Bygrave, S.; Bosi, M.

2004-01-01

Although there are a number of possible links between emission trading and project-based mechanisms, the focus of this paper is on linking domestic GHG emission trading schemes with: (1) domestic; and, (2) international (JI and CDM) GHG reduction project activities. The objective is to examine some of the challenges in linking DETs and project-based mechanisms, as well as some possible solutions to address these challenges. The link between JI / CDM and intergovernmental international emissions trading (i.e. Article 17 of the Kyoto Protocol) is defined by the Kyoto Protocol, and therefore is not covered in this paper. The paper is written in the context of: (a) countries adhering to the Kyoto Protocol and elaborating their strategies to meet their GHG emission commitments, including through the use of the emissions trading and project-based mechanisms. For example, the European Union (EU) will be commencing a GHG Emissions Trading Scheme in January 2005, and recently, the Council of ministers and the European Parliament agreed on a text for an EU Linking Directive allowing the use of JI and CDM emission units in the EU Emission Trading Scheme (EU-ETS); and (b) all countries (and/or regions within countries) with GHG emission obligations that may choose to use domestic emissions trading and project-based mechanisms to meet their GHG commitments. The paper includes the following elements: (1) an overview of the different flexibility mechanisms (i.e. GHG emissions trading and PBMs), including a brief description and comparisons between the mechanisms (Section 3); (2) an exploration of the issues that emerge when project-based mechanisms link with domestic emissions trading schemes, as well as possible solutions to address some of the challenges raised (Section 4); (3) a case study examining the EU-ETS and the EU Linking Directive on project-based mechanisms, in particular on how the EU is addressing in a practical context relevant linking issues (Section 5); (4) a

Investigating Time-Varying Drivers of Grid Project Emissions Impacts

Energy Technology Data Exchange (ETDEWEB)

Barrett, Emily L.; Thayer, Brandon L.; Pal, Seemita; Studarus, Karen E.

2017-11-15

The emissions consequences of smart grid technologies depend heavily on their context and vary not only by geographical location, but by time of year. The same technology operated to meet the same objective may increase the emissions associated with energy generation for part of the year and decrease emissions during other times. The Grid Project Impact Quantification (GridPIQ) tool provides the ability to estimate these seasonal variations and garner insight into the time-varying drivers of grid project emissions impacts. This work leverages GridPIQ to examine the emissions implications across years and seasons of adding energy storage technology to reduce daily peak demand in California and New York.

Air Contamination by Mercury, Emissions and Transformations-a Review.

Science.gov (United States)

Gworek, Barbara; Dmuchowski, Wojciech; Baczewska, Aneta H; Brągoszewska, Paulina; Bemowska-Kałabun, Olga; Wrzosek-Jakubowska, Justyna

2017-01-01

The present and future air contamination by mercury is and will continue to be a serious risk for human health. This publication presents a review of the literature dealing with the issues related to air contamination by mercury and its transformations as well as its natural and anthropogenic emissions. The assessment of mercury emissions into the air poses serious methodological problems. It is particularly difficult to distinguish between natural and anthropogenic emissions and re-emissions from lands and oceans, including past emissions. At present, the largest emission sources include fuel combustion, mainly that of coal, and "artisanal and small-scale gold mining" (ASGM). The distinctly highest emissions can be found in South and South-East Asia, accounting for 45% of the global emissions. The emissions of natural origin and re-emissions are estimated at 45-66% of the global emissions, with the largest part of emissions originating in the oceans. Forecasts on the future emission levels are not unambiguous; however, most forecasts do not provide for reductions in emissions. Ninety-five percent of mercury occurring in the air is Hg 0 -GEM, and its residence time in the air is estimated at 6 to 18 months. The residence times of its Hg II -GOM and that in Hg p -TPM are estimated at hours and days. The highest mercury concentrations in the air can be found in the areas of mercury mines and those of ASGM. Since 1980 when it reached its maximum, the global background mercury concentration in the air has remained at a relatively constant level.

A novel approach to transformed biometrics using successive projections

Science.gov (United States)

Gopi, E. S.

2010-02-01

Unlike user created password, number of biometrics is limited for creating account in different organizations. Transformed biometrics attempts to solve the problem by transforming the biometric into another form, which is unique to the particular organization. This makes the availability of different transformed biometrics in different organizations transformed from the same biometrics and helps in foolproof transactions. In this article a novel approach to transformed biometrics using successive projection technique is suggested .In the proposed technique, the user can register up to 5*4n-1 organizations if the length of the biometric password is 'n'.

Impact of trade in emission reduction credits on solar projects

International Nuclear Information System (INIS)

Kulkarni, P.

1993-01-01

Since the amendment of the Clean Air Act in 1990, the possibility of trading in Emission Reduction Credits has been looked upon as a strategy for improving the economic feasibility of solar projects. This paper discusses developments towards such a market and reviews current and proposed emission trading practices. The paper analyzes how the current characteristics of the market help or hinder the trading of credits generated by solar projects, and suggests possible solutions. Emission credits from four different solar projects and their trading potentials are presented

Nitrogen transformation and nitrous oxide emissions affected by biochar amendment and fertilizer stabilizers

Science.gov (United States)

Biochar as a soil amendment and the use of fertilizer stabilizers (N transformation inhibitors) have been shown to reduce N2O emissions, but the mechanisms or processes involved are not well understood. The objective of this research was to investigate N transformation processes and the relationship...

Reference projections for greenhouse gases in the Netherlands: emission projections for 2001 - 2010

NARCIS (Netherlands)

Wijngaarden R van den; Ybema JR; Gijsen A; Oude Lohuis JA; Thomas R; Daniels B; Dril AWN van; Volkers CH; Energieonderzoek Centrum; LAE

2002-01-01

The results are presented of the project 'reference projection for energy and greenhouse gases' carried out by RIVM and ECN for the Ministries of Housing, Spatial Planning and the Environment, and of Economic Affairs. The reference projection considers emission of greenhouse gases in

Assessing Embodied Energy and Greenhouse Gas Emissions in Infrastructure Projects

Directory of Open Access Journals (Sweden)

Jan Krantz

2015-10-01

Full Text Available Greenhouse gas (GHG emissions from construction processes are a serious concern globally. Of the several approaches taken to assess emissions, Life Cycle Assessment (LCA based methods do not just take into account the construction phase, but consider all phases of the life cycle of the construction. However, many current LCA approaches make general assumptions regarding location and effects, which do not do justice to the inherent dynamics of normal construction projects. This study presents a model to assess the embodied energy and associated GHG emissions, which is specifically adapted to address the dynamics of infrastructure construction projects. The use of the model is demonstrated on the superstructure of a prefabricated bridge. The findings indicate that Building Information Models/Modeling (BIM and Discrete Event Simulation (DES can be used to efficiently generate project-specific data, which is needed for estimating the embodied energy and associated GHG emissions in construction settings. This study has implications for the advancement of LCA-based methods (as well as project management as a way of assessing embodied energy and associated GHG emissions related to construction.

Project baselines and boundaries for project-based GHG emission reduction trading : a report to the Greenhouse Gas Emission Trading Pilot Program

Energy Technology Data Exchange (ETDEWEB)

Lazarus, M.; Kartha, S.; Bernow, S. [Tellus Inst., Boston, MA (United States)

2001-04-01

One of the great challenges for policy makers in the twenty first century is turning out to be global climate change caused by greenhouse gas emissions. Recent setbacks in international negotiations do not preclude the imposition of national emission targets. One option being studied to increase the economic efficiency of meeting these targets is the creation of emissions trading markets. The exploration of credit trading in the field of greenhouse gas emissions is carried out under the banner of the Greenhouse Gas Emission Reduction Trading (GERT) Pilot Project. One of its objectives is the development of the institutional framework required for the Clean Development Mechanism (CDM), Joint Implementation (JI), and other international credit trading programs. To ensure credits are awarded to projects in a fair and transparent manner, technical, methodological, and administrative processes must be put in place. The determination of project baselines and project boundaries represent two of the main challenges confronting policy makers in awarding the credits. A review of baseline and boundary methods was initiated by GERT, and this report also contains a description of the main advantages and drawbacks of the various methods being considered. Lessons learned and opportunities are especially important for GERT to provide proper guidance to developers. The context and rationale for baselines and boundary setting are first explored in this report, as well as the issues of importance, and common criteria for the evaluation of alternative methods. The principal options for baseline determination, advantages and disadvantages, and applicability in various contexts were reviewed in section 2. The topic of avoided electricity use, and how to set consistent baselines for it are discussed in section 3. Project boundary is the topic of section 4, including leakage, upstream and downstream emissions, rebound and positive spillover effects, and means by which these issues can de

Greenhouse gas emissions trading and project-based mechanisms. Proceedings - CATEP

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

Greenhouse gas emissions trading and project-based mechanisms for greenhouse gas reduction are emerging market-based instruments for climate change policy. This book presents a selection of papers from an international workshop co-sponsored by the OECD and Concerted Action on Tradeable Emissions Permits (CATEP), to discuss key research and policy issues relating to the design and implementation of these instruments. The papers cover the experience of developing and transition countries with greenhouse gas emissions trading and project-based mechanisms. In addition, the papers examine the use of tradeable permits in policy mixes and harmonisation of emissions trading schemes, as well as transition issues relating to greenhouse gas emissions trading markets.

The large contribution of projected HFC emissions to future climate forcing.

Science.gov (United States)

Velders, Guus J M; Fahey, David W; Daniel, John S; McFarland, Mack; Andersen, Stephen O

2009-07-07

The consumption and emissions of hydrofluorocarbons (HFCs) are projected to increase substantially in the coming decades in response to regulation of ozone depleting gases under the Montreal Protocol. The projected increases result primarily from sustained growth in demand for refrigeration, air-conditioning (AC) and insulating foam products in developing countries assuming no new regulation of HFC consumption or emissions. New HFC scenarios are presented based on current hydrochlorofluorocarbon (HCFC) consumption in leading applications, patterns of replacements of HCFCs by HFCs in developed countries, and gross domestic product (GDP) growth. Global HFC emissions significantly exceed previous estimates after 2025 with developing country emissions as much as 800% greater than in developed countries in 2050. Global HFC emissions in 2050 are equivalent to 9-19% (CO(2)-eq. basis) of projected global CO(2) emissions in business-as-usual scenarios and contribute a radiative forcing equivalent to that from 6-13 years of CO(2) emissions near 2050. This percentage increases to 28-45% compared with projected CO(2) emissions in a 450-ppm CO(2) stabilization scenario. In a hypothetical scenario based on a global cap followed by 4% annual reductions in consumption, HFC radiative forcing is shown to peak and begin to decline before 2050.

Global emission projections for the transportation sector using dynamic technology modeling

Science.gov (United States)

Yan, F.; Winijkul, E.; Streets, D. G.; Lu, Z.; Bond, T. C.; Zhang, Y.

2014-06-01

In this study, global emissions of gases and particles from the transportation sector are projected from the year 2010 to 2050. The Speciated Pollutant Emission Wizard (SPEW)-Trend model, a dynamic model that links the emitter population to its emission characteristics, is used to project emissions from on-road vehicles and non-road engines. Unlike previous models of global emission estimates, SPEW-Trend incorporates considerable detail on the technology stock and builds explicit relationships between socioeconomic drivers and technological changes, such that the vehicle fleet and the vehicle technology shares change dynamically in response to economic development. Emissions from shipping, aviation, and rail are estimated based on other studies so that the final results encompass the entire transportation sector. The emission projections are driven by four commonly-used IPCC (Intergovernmental Panel on Climate Change) scenarios (A1B, A2, B1, and B2). With global fossil-fuel use (oil and coal) in the transportation sector in the range of 128-171 EJ across the four scenarios, global emissions are projected to be 101-138 Tg of carbon monoxide (CO), 44-54 Tg of nitrogen oxides (NOx), 14-18 Tg of non-methane total hydrocarbons (THC), and 3.6-4.4 Tg of particulate matter (PM) in the year 2030. At the global level, a common feature of the emission scenarios is a projected decline in emissions during the first one or two decades (2010-2030), because the effects of stringent emission standards offset the growth in fuel use. Emissions increase slightly in some scenarios after 2030, because of the fast growth of on-road vehicles with lax or no emission standards in Africa and increasing emissions from non-road gasoline engines and shipping. On-road vehicles and non-road engines contribute the most to global CO and THC emissions, while on-road vehicles and shipping contribute the most to NOx and PM emissions. At the regional level, Latin America and East Asia are the two

Ontario emissions trading code : emission reduction credit creation, recording and transfer rules, rules for renewable energy projects and conservation projects, and rules for the operation of the Ontario Emissions Trading Registry

International Nuclear Information System (INIS)

2001-12-01

Emissions trading has been an integral part of Ontario's air quality strategy since December 31, 2001. Ontario has adopted the 'cap, credit and trade' type of emissions trading system, a hybrid that takes the best features of pure 'cap-and-trade' and 'baseline-and-credit' type systems. It covers nitric oxide and sulphur dioxide. The Ontario Emissions Trading Code supplements Ontario Regulation 397/01 and sets out rules for renewable energy projects and conservation projects for which applications for emission allowances can be made. This Code describes the rules for the creation and transfer of emission reduction credits (ERCs). It also explains the rules for the operation of the registry that has been established to provide information to the public about the emissions trading program and records decisions about credit creation and credit and allowance retirement. 3 tabs

Reference projection energy and emissions 2010-2020

International Nuclear Information System (INIS)

Daniels, B.; Kruitwagen, S.

2010-12-01

The Reference Projection 2010-2020 examines the future development of Dutch energy use, greenhouse gas emissions and air pollution up to 2020. The Reference projection is based on assumptions regarding economic, structural, technological and policy developments. With regard to the latter, the 'Schoon en Zuinig' (Clean and Efficient) policy programme for energy and climate, introduced in 2007, plays an important role. According to Schoon en Zuinig, greenhouse gas emissions have to be reduced by 30% in 2020 compared to 1990; the annual energy efficiency improvement has to increase to 2% and the target share of renewable energy production in total consumption in 2020 is 20%. To assess the effects of the policy measures from the 'Schoon en Zuinig' policy programme, the Reference projection explores three policy variants: one without policies introduced after 2007, one including only post-2007 policies that are already fixed, and one including proposed policy measures as well. Here, policies refer to Dutch as well as to European policies. The results indicate that the climate and energy targets will not be reached with the current instruments. Including proposed policy measures, the estimated greenhouse gas reduction will amount to 16-24% relative to 1990, the renewable energy share will rise to 13-16% and the annual energy efficiency improvement between 2011 and 2020 will amount to between 1.1 and 1.6%. European targets for greenhouse gas emissions can be reached, especially in the case of implementation of the proposed policies. As for renewable energy, the implementation of proposed policies is imperative for attaining the target, but likely to be insufficient. Current European targets for air pollutants are within reach. 2020 emission levels of most air pollutants are lower than the current 2010 National Emission Ceilings, with the exception of ammonia, where there is a substantial chance that the 2020 emissions will exceed the 2010 ceiling. However, ceilings are

ECO2, Emissions Trading Services, development project

International Nuclear Information System (INIS)

Ruokonen, A.

2006-01-01

Emissions Trading started within EU at the beginning of 2005. It caused substantial changes to the business environment of energy companies and energy intensive industry. The planning of Emissions Trading is a complicated process and companies will need consulting, IT systems and other services. Emissions Trading introduces a new factor of production emission allowances, which are tradable commodities. In future, Emissions Trading emissions, emission allowances and the prices of emission allowances have to be considered during the fuel purchasing and the energy production planning. And the best possible knowledge of the own emissions balance and market situation has a monetary value when trading emission allowances. Allocation of emission allowances has done in each country according to National Allocation Plan (NAP), accepted by EU. Finland itself and thus also the Finnish companies will be net buyers of emission allowances in long run. That means commonly that the Finnish companies have to buy more allowances meaning some extra costs to the companies. That's why it is very important to develop and provide to the companies an innovatory emissions planning, follow-up, management and reporting systems. With good emission balance management the extra costs of Emissions Trading will be as low as possible. In ECO2 project, Empower together with Power-Deriva, developed Expert services, Emissions Balance Management and Reporting services and Risk Management services for Emissions Trading and needed software and tools for these services. (orig.)

Achieving Smart Energy Planning Objectives. The Approach of the Transform Project

Directory of Open Access Journals (Sweden)

Ilaria Delponte

2014-05-01

Full Text Available Cities play a dual role in the field of energy and integrated planning. They function as institutional planning and decision making bodies and interfere as actors, e.g. as project developers or launching customers. In the first case their attempts at integrated plans are often unsuccessful in integrating vision, goals and instruments of all stakeholders so that waste, water, energy cycles, urban planning and budgets proceed with no connection to each other.  TRANSFORM Project “Transformation Agenda for Low Carbon Cities” (FP7 tries to improve the integrated energy policy and decision making process of cities, both at a strategic and operational level, by providing the cities with a framework based on overall planning experiences and on-the-field projects and qualitative and quantitative analysis support models. The project intends also to make a step further in the quality of research, by providing a replicable and tested framework for the production of a strategic Transformation Agenda for the city as a whole, combined with district Implementation Plans.

Transformational leadership and project success : The mediating role of team-building

NARCIS (Netherlands)

Aga, Deribe Assefa; Noorderhaven, Niels; Vallejo, Bertha

2016-01-01

Although the effect of transformational leadership on project success is empirically supported, less is known about the mechanisms that explain this effect. To address this issue, we propose the mediating role of team-building as a possible explanation of the relationship between transformational

Projection of greenhouse gas emissions 2007 to 2025

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Winther, Morten; Mikkelsen, Mette Hjorth

This report contains a description of models and background data for projection of CO2, CH4, N2O, HFCs, PFCs and SF6 for Denmark. The emissions are projected to 2025 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts of activity...

Projection of Greenhouse Gas Emissions 2009 to 2030

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Winther, Morten; Mikkelsen, Mette Hjorth

This report contains a description of models, background data and projections of CO2, CH4, N2O, HFCs, PFCs and SF6 for Denmark. The emissions are projected to 2030 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts of activity r...

Projections of global emissions of fluorinated greenhouse gases in 2050

Energy Technology Data Exchange (ETDEWEB)

Gschrey, Barbara; Schwarz, Winfried [Oeko-Recherche Buero fuer Umweltforschung und -beratung GmbH, Frankfurt/Main (Germany)

2009-11-15

Emissions of fluorinated greenhouse gases are currently covered under the Montreal Protocol, which focuses on ozone-depleting substances such as CFCs (chlorofluorocarbons) and HCFCs (hydrochlorofluorocarbons), and under the Kyoto Protocol, which controls emissions of HFCs (hydrofluorocarbons), PFCs (perfluorocarbons) and SF{sub 6} (sulfur hexafluoride). This study bridges the gap between political regimes and their reporting systems by giving an overview of banks and emissions of all fluorinated gases in 2005, and projections of banks and emissions of fluorinated gases in 2050. The Montreal Protocol and its amendments will eventually result in the full phase out of CFCs and HCFCs. Developed countries have already completed the phase out of CFCs and will reach full phase out of HCFCs by 2020. Developing countries, in contrast, will phase out CFCs by 2010 and HCFCs by 2030. Although climate-friendly technology is available for most applications, the risk occurs that substitutes for ozone-depleting substances rely on HFCs, which cause global warming. This study determines global emissions of HFCs, PFCs and SF{sub 6} (Kyoto F-gases) in 2050 in a ''business-as-usual'' scenario. The global population is expected to increase to ca. 8.7 billion people, and high economic growth of 3.5% per year is assumed. Emissions in 2050 are quantified for each sector of application as well as for developed and developing countries based on growth rates of each sector. In 2050, total global emissions of fluorinated greenhouse gases are projected to amount to 4 GT CO{sub 2} eq. which equals ca. 5.9% of the total greenhouse gas emissions at this time. Compared to a relatively small share of F-gas emissions ranging around 1.3% of total greenhouse gas emissions in 2004, this percentage reflects an enormous increase. Relative to projected direct CO{sub 2} emissions alone, the 2050 F-gas emissions will even account for ca. 7.9%. In case of CO{sub 2} mitigation, this share

Detection of partial discharges in oil transformers with the aid of acoustic emission analysis; Detektion von Teilentladungen in Oeltransformatoren durch die Schallemissionsanalyse

Energy Technology Data Exchange (ETDEWEB)

Loehr, M. [Physical Acoustics BV - Deutschland, Hamburg (Germany)

2007-07-01

Since the early eighties, acoustic emission analysis has been used for functional testing of transformers. Partial discharges of 150 pC and above are detected reliably. Transformers with oil/paper insulation as a rule are inspected during operation by analysis of the transformer oil at regular intervals or continuously. This integral method provides no information on the operating conditions causing partial discharge and no information on their location. This information gap may be closed by acoustic emission analysis, which will provide the key information required for selective planning of preventive measures. Physical Acoustics (PAC) tested several hundreds of transformers successfully for their operating performance (see also EPRI Project I.D. No. 051481). As a result, e.g., transformers can now be operated for a longer period of time below critical load. [German] Die Schallemissionsanalyse wird seit den fruehen 80-iger Jahren letzten Jahrhunderts von Transformator-Herstellern bei der Funktionspruefung eingesetzt. Hierbei werden Teilentladungen von 150 pC und mehr zuverlaessig detektiert. Oel-papierisolierte Transformatoren werden in der Regel waehrend des Betriebs durch eine Analyse des Transformator-Oels inspeziert. Die Oelanalyse kann in regelmaessigen Abstaenden oder dauerhaft erfolgen. Als integrales Verfahren bietet diese Methode keine Information zu den Betriebsbedingungen unter den Teilentladungen auftreten und gibt auch keine Information zum Ort deren Auftretens. Diese Informationsluecke kann durch den Einsatz einer Schallemissionspruefung (AT) geschlossen werden. Mit dem Messen der Schallemission durch am Trafokessel angebrachte Sensoren kann der Ort und der Zeitpunkt von Stoerungen festgestellt werden. Mit diesen Schluesselinformationen wird es moeglich, die weiteren notwendigen Massnahmen gezielt zu planen. Physical Acoustics (PAC) hat mehrere hunderte von Transformatoren erfolgreich auf ihr Betriebsverhalten untersucht (siehe auch EPRI-Projekt I

Urban CO2 emissions metabolism: The Hestia Project

Science.gov (United States)

Gurney, K. R.; Razlivanov, I.; Zhou, Y.; Song, Y.

2011-12-01

A central expression of urban metabolism is the consumption of energy and the resulting environmental impact, particularly the emission of CO2 and other greenhouse gases. Quantification of energy and emissions has been performed for numerous cities but rarely has this been done in explicit space/time detail. Here, we present the Hestia Project, an effort aimed at building a high resolution (eg. building and road link-specific, hourly) fossil fuel CO2 emissions data product for the urban domain. A complete data product has been built for the city of Indianapolis and work is ongoing for the city of Los Angeles (Figure 1). The effort in Indianapolis is now part of a larger effort aimed at a convergent top-down/bottom-up assessment of greenhouse gas emissions, called INFLUX. Our urban-level quantification relies on a mixture of data and modeling structures. We start with the sector-specific Vulcan Project estimate at the mix of geocoded and county-wide levels. The Hestia aim is to distribute the Vulcan result in space and time. Two components take the majority of effort: buildings and onroad emissions. For the buildings, we utilize an energy building model which we constrain through lidar data, county assessor parcel data and GIS layers. For onroad emissions, we use a combination of traffic data and GIS road layers maintaining vehicle class information. Finally, all pointwise data in the Vulcan Project are transferred to our urban landscape and additional time distribution is performed. A key benefit of the approach taken in this study is the tracking and archiving of fuel and process-level detail (eg. combustion process, other pollutants), allowing for a more thorough understanding and analysis of energy throughputs in the urban environment. Next steps in this research from the metabolism perspective is to consider the carbon footprint of material goods and their lateral transfer in addition to the connection between electricity consumption and production.

Oblique projections and standard-form transformations for discrete inverse problems

DEFF Research Database (Denmark)

Hansen, Per Christian

2013-01-01

This tutorial paper considers a specific computational tool for the numerical solution of discrete inverse problems, known as the standard-form transformation, by which we can treat general Tikhonov regularization problems efficiently. In the tradition of B. N. Datta's expositions of numerical li...... linear algebra, we use the close relationship between oblique projections, pseudoinverses, and matrix computations to derive a simple geometric motivation and algebraic formulation of the standard-form transformation....

A real option-based model to valuate CDM projects under uncertain energy policies for emission trading

International Nuclear Information System (INIS)

Park, Taeil; Kim, Changyoon; Kim, Hyoungkwan

2014-01-01

Highlights: • A real option-based model for the valuation of CDM projects is proposed. • This study investigates the impact of energy policies on the value of CDM projects. • Level of target emission and its schedule should be carefully designed. • Government subsidy facilitates the implementation of CDM projects. • Period for free emission allowance prevents promoting CDM projects. - Abstract: Emission trading has been considered a primary policy tool for emission reduction. Governments establish national targets for emission reduction and assign emission reduction goals to private entities to accomplish the targets. To attain the goal, private entities should perform offset projects that can produce emission credits or buy emission credits from the market. However, it is not easy for private entities to decide to implement the projects because energy policies associated with emission trading keep changing; thus, the future benefits of the offset projects are quite uncertain. This study presents a real option-based model to investigate how uncertain energy policies affect the financial viability of an offset project. A case study showed that the establishment of a target emission was attractive to the government because it could make the CDM project financially viable with a small amount of government subsidy. In addition, the level of the government subsidy could determine the investment timing for the CDM project. In this context, governments should be cautious in designing energy policies, because even the same energy policies could have different impacts on private entities. Overall, this study is expected to assist private entities in establishing proper investment strategies for CDM projects under uncertain energy policies

Assessment of Carbon Emission Reduction for Buildings Projects in Malaysia-A Comparative Analysis

Directory of Open Access Journals (Sweden)

Klufallah Mustafa M. A.

2014-01-01

Full Text Available The Malaysian construction industry significantly contributes as an empowerment to its development vision of 2020 by reducing 40% of carbon emission. Moreover, this industry accounts as a threat to the environment, not only in terms of consumption of natural resources but also in emitting million tons of carbon emission annually. In fact, Malaysia is categorized the 30th in the world's ranking in carbon emission level. To mitigate the raise of carbon emission level from the buildings construction, several studies identified some of the effective carbon emission assessment tools for construction projects but it is lack of implementation in Malaysia. The green building index (GBI, Malaysian CIB Report has been introduced to assist the construction stakeholders in reducing the level of carbon emission and the impact of buildings on the environment. This paper presents an analysis of carbon emission from housing projects and office buildings in order to identify and quantify the main sources of carbon emission for each project and it proposes environmental friendly materials as replacement for conventional construction materials to achieve the implementation of sustainability in Malaysia.

Achieving CO2 Emissions Reduction Goals with Energy Infrastructure Projects

International Nuclear Information System (INIS)

Eberlinc, M.; Medved, K.; Simic, J.

2013-01-01

The EU has set its short-term goals in the Europe 2020 Strategy (20% of CO 2 emissions reduction, 20% increase in energy efficiency, 20% share of renewables in final energy). The analyses show that the EU Member States in general are on the right track of achieving these goals; they are even ahead (including Slovenia). But setting long-term goals by 2050 is a tougher challenge. Achieving CO 2 emissions reduction goes hand in hand with increasing the share of renewables and strategically planning the projects, which include exploiting the potential of renewable sources of energy (e.g. hydropower). In Slovenia, the expected share of hydropower in electricity production from large HPPs in the share of renewables by 2030 is 1/3. The paper includes a presentation of a hydro power plants project on the middle Sava river in Slovenia and its specifics (influenced by the expansion of the Natura 2000 protected sites and on the other hand by the changes in the Environment Protection Law, which implements the EU Industrial Emissions Directive and the ETS Directive). Studies show the importance of the HPPs in terms of CO 2 emissions reduction. The main conclusion of the paper shows the importance of energy infrastructure projects, which contribute to on the one hand the CO 2 emissions reduction and on the other the increase of renewables.(author)

Examination of oil sands projects : gasification, CO{sub 2} emissions and supply costs

Energy Technology Data Exchange (ETDEWEB)

Elliott, K. [Energy Resources Conservation Board, Calgary, AB (Canada)

2008-10-15

Non-conventional resources such as Alberta's oil sands are experiencing increased global interest because of the decline in global conventional oil and natural gas reserves. Bitumen extraction and upgrading is an energy intensive process. This paper provided a general discussion of Alberta's oil sands reserves, production and energy requirements. The paper discussed the application of different technologies to the oil sands, and in particular, the use of gasification as a method to produce bitumen-derived synthesis gas. Two oil sands projects currently under construction and implementing gasification technology were briefly described. The paper also provided a comparison of emission intensities from projects that employ gasification leading to a forecast of carbon dioxide equivalent emissions from the oil sands. The impact of Alberta's legislation and the federal framework on greenhouse gas emissions were also examined. Last, the paper discussed a supply cost methodology to compare an integrated extraction and upgrading project using gasification versus a similar project using a conventional steam methane reforming process (SMR). It was concluded that after comparing carbon dioxide emission intensities across different types of projects, the type of project that would be most heavily impacted by greenhouse gas emissions penalties was an in-situ extraction with an upgrading project that employed gasification technology. 36 refs., 5 tabs., 12 figs., 1 appendix.

Emissions from decentralised CHP plants 2007 - Energinet.dk Environmental project no. 07/1882. Project report 5 - Emission factors and emission inventory for decentralised CHP production

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Malene; Nielsen, Ole-Kenneth; Thomsen, M.

2010-06-15

Updated emission factors for decentralised combined heat and power (CHP) plants with a capacity < 25MWe have been estimated based on project emission measurements as well as emission measurements performed in recent years that were collected. The emission factors valid for 2006/2007 have been estimated for the plant technologies: Municipal solid waste (MSW) incineration plants, plants combusting straw or wood, natural gas fuelled reciprocating engines, biogas fuelled engines, natural gas fuelled gas turbines, gas oil fuelled reciprocating engines, gas oil fuelled gas turbines, steam turbines combusting residual oil and reciprocating engines combusting biomass producer gas based on wood. The emission factors for MSW incineration plants are much lower than the emission factors that were estimated for year 2000. The considerable reduction in the emission factors is a result of lower emission limit values in Danish legislation since 2006 that has lead to installation of new and improved flue gas cleaning systems in most MSW incineration plants. For CHP plants combusting wood or straw no major technical improvements have been implemented. The emission factors for natural gas fuelled reciprocating engines have been reduced since year 2000 as a result of technical improvements that have been carried out due to lower emission limit values in Danish legislation. The NO{sub x} emission factor for natural gas fuelled gas turbines has decreased 62 % since year 2000. This is a result of installation of low-NO{sub x} burners in almost all gas turbines that has been necessary to meet new emission limits in Danish legislation. The emission measurements programme included screening of the emissions of HCB, PCB, PCDD/-F and PBDD/-F. Compared to the Danish national emission decentralized CHP plants are major emission sources for CH{sub 4}, NO{sub x}, SO{sub 2}, heavy metals and HCB. (author)

Biorthogonal projected energies of a Gutzwiller similarity transformed Hamiltonian.

Science.gov (United States)

Wahlen-Strothman, J M; Scuseria, G E

2016-12-07

We present a method incorporating biorthogonal orbital-optimization, symmetry projection, and double-occupancy screening with a non-unitary similarity transformation generated by the Gutzwiller factor [Formula: see text], and apply it to the Hubbard model. Energies are calculated with mean-field computational scaling with high-quality results comparable to coupled cluster singles and doubles. This builds on previous work performing similarity transformations with more general, two-body Jastrow-style correlators. The theory is tested on 2D lattices ranging from small systems into the thermodynamic limit and is compared to available reference data.

Classical geometry Euclidean, transformational, inversive, and projective

CERN Document Server

Leonard, I E; Liu, A C F; Tokarsky, G W

2014-01-01

Features the classical themes of geometry with plentiful applications in mathematics, education, engineering, and science Accessible and reader-friendly, Classical Geometry: Euclidean, Transformational, Inversive, and Projective introduces readers to a valuable discipline that is crucial to understanding bothspatial relationships and logical reasoning. Focusing on the development of geometric intuitionwhile avoiding the axiomatic method, a problem solving approach is encouraged throughout. The book is strategically divided into three sections: Part One focuses on Euclidean geometry, which p

Characterization of near-infrared nonmetal atomic emission from an atmospheric helium microwave-induced plasma using a Fourier transform spectrophotometer

International Nuclear Information System (INIS)

Hubert, J.; Van Tra, H.; Chi Tran, K.; Baudais, F.L.

1986-01-01

A new approach for using Fourier transform spectroscopy (FTS) for the detection of atomic emission from an atmospheric helium plasma has been developed and the results obtained are described. Among the different types of plasma source available, the atmospheric pressure microwave helium plasma appears to be an efficient excitation source for the determination of nonmetal species. The more complete microwave plasma emission spectra of Cl, Br, I, S, O, P, C, N, and He in the near-infrared region were obtained and their corrected relative emission intensities are reported. This makes qualitative identification simple, and aids in the quantitative analysis of atomic species. The accuracy of the emission wavelengths obtained with the Fourier transform spectrophotometer was excellent and the resolution provided by the FTS allowed certain adjacent emission lines to be adequate for analytical applications

Uncertainty in projected climate change arising from uncertain fossil-fuel emission factors

Science.gov (United States)

Quilcaille, Y.; Gasser, T.; Ciais, P.; Lecocq, F.; Janssens-Maenhout, G.; Mohr, S.

2018-04-01

Emission inventories are widely used by the climate community, but their uncertainties are rarely accounted for. In this study, we evaluate the uncertainty in projected climate change induced by uncertainties in fossil-fuel emissions, accounting for non-CO2 species co-emitted with the combustion of fossil-fuels and their use in industrial processes. Using consistent historical reconstructions and three contrasted future projections of fossil-fuel extraction from Mohr et al we calculate CO2 emissions and their uncertainties stemming from estimates of fuel carbon content, net calorific value and oxidation fraction. Our historical reconstructions of fossil-fuel CO2 emissions are consistent with other inventories in terms of average and range. The uncertainties sum up to a ±15% relative uncertainty in cumulative CO2 emissions by 2300. Uncertainties in the emissions of non-CO2 species associated with the use of fossil fuels are estimated using co-emission ratios varying with time. Using these inputs, we use the compact Earth system model OSCAR v2.2 and a Monte Carlo setup, in order to attribute the uncertainty in projected global surface temperature change (ΔT) to three sources of uncertainty, namely on the Earth system’s response, on fossil-fuel CO2 emission and on non-CO2 co-emissions. Under the three future fuel extraction scenarios, we simulate the median ΔT to be 1.9, 2.7 or 4.0 °C in 2300, with an associated 90% confidence interval of about 65%, 52% and 42%. We show that virtually all of the total uncertainty is attributable to the uncertainty in the future Earth system’s response to the anthropogenic perturbation. We conclude that the uncertainty in emission estimates can be neglected for global temperature projections in the face of the large uncertainty in the Earth system response to the forcing of emissions. We show that this result does not hold for all variables of the climate system, such as the atmospheric partial pressure of CO2 and the

Estimation of the Tool Condition by Applying the Wavelet Transform to Acoustic Emission Signals

International Nuclear Information System (INIS)

Gomez, M. P.; Piotrkowski, R.; Ruzzante, J. E.; D'Attellis, C. E.

2007-01-01

This work follows the search of parameters to evaluate the tool condition in machining processes. The selected sensing technique is acoustic emission and it is applied to a turning process of steel samples. The obtained signals are studied using the wavelet transformation. The tool wear level is quantified as a percentage of the final wear specified by the Standard ISO 3685. The amplitude and relevant scale obtained of acoustic emission signals could be related with the wear level

Environmental Management Department Quality Assurance Project Plan for Radionuclide Emission Measurements Project for compliance with National Emission Standards for Hazardous Air Pollutants (NESHAP)

Energy Technology Data Exchange (ETDEWEB)

Poole, D A

1992-06-01

This Quality Assurance Project Plan (QAPP) satisfies the quality assurance (QA) requirements in 40 CFR Part 61, Method 114, for ensuring that the radionuclide air emission measurements from the Y-12 Plant are representative; of a known precision and accuracy; and include administrative controls to ensure prompt response when emission measurements indicate an increase over normal radionuclide emissions. The QAPP ensures the quality of the Y-12 Plant radionuclide emission measurements data from the continuous samplers, breakthrough monitors, and minor radionuclide release points. The plan specifies the procedures for the management of the activities affecting the quality of the data for the Y-12 Plant Environmental Management Department (EMD) within the Health, Safety, Environment, and Accountability Division (HSEA).

Environmental Management Department Quality Assurance Project Plan for Radionuclide Emission Measurements Project for compliance with National Emission Standards for Hazardous Air Pollutants (NESHAP)

International Nuclear Information System (INIS)

Poole, D.A.

1992-06-01

This Quality Assurance Project Plan (QAPP) satisfies the quality assurance (QA) requirements in 40 CFR Part 61, Method 114, for ensuring that the radionuclide air emission measurements from the Y-12 Plant are representative; of a known precision and accuracy; and include administrative controls to ensure prompt response when emission measurements indicate an increase over normal radionuclide emissions. The QAPP ensures the quality of the Y-12 Plant radionuclide emission measurements data from the continuous samplers, breakthrough monitors, and minor radionuclide release points. The plan specifies the procedures for the management of the activities affecting the quality of the data for the Y-12 Plant Environmental Management Department (EMD) within the Health, Safety, Environment, and Accountability Division (HSEA)

The Human Genome Project: big science transforms biology and medicine

OpenAIRE

Hood, Leroy; Rowen, Lee

2013-01-01

The Human Genome Project has transformed biology through its integrated big science approach to deciphering a reference human genome sequence along with the complete sequences of key model organisms. The project exemplifies the power, necessity and success of large, integrated, cross-disciplinary efforts - so-called ‘big science’ - directed towards complex major objectives. In this article, we discuss the ways in which this ambitious endeavor led to the development of novel technologies and a...

IT Mangement for Transforming Local Government - a Danish Collaborative Practice Research Project

DEFF Research Database (Denmark)

Kræmmergaard, Pernille; Agger Nielsen, Jeppe

2011-01-01

The aim of this paper is to present the methodology and preliminary findings from an on-going Danish collaborative practice research project concerning IT-Management in Transformational e-Government - DISIMIT. The ambition of the DISIMIT project is to improve IT management in local governments...... (municipalities) and to contribute with knowledge about IT-Management to the IS literature in general and to the e-government literature in particular. The paper reports on the process of conducting collaborative practice research and the selected findings from the empirical research activities. Up till now...... of eGovernment maturity and diagnosed the six main challenges faced by local governments in their efforts of realizing transformational e-Government. From these challenges, the project chose three challenges to investigate further according to the principles from Collaborative Practice Research...

Application for coordinate transformation between Gaus - Kruger projection: Bessel ellipsoid and UTM projection: WGS84 ellipsoid

Directory of Open Access Journals (Sweden)

Zoran Gojković

2017-01-01

Full Text Available The physical surface of the earth has irregular shape which is not mathematically defined, therefore the shape of the Earth is approximated with mathematically defined surfaces such as ellipsoid and sphere. The developing of a global positioning systems, thus and modern navigation systems, as effect produce large amounts of data which contain the problem of homogeneity. This problem could be exceed if all the data are store in the same coordinate system. Hence the need for data transformation from local coordinate systems to the global coordinate systems. Global level implies WGS84 ellipsoid and UTM projection while national coordinate system of Republic Serbia is Gauss-Kruger with Bessel ellipsoid. This coordinate system of Republic Serbia on a global level has a local character. Applying appropriate mathematical models and functions it is possible to transform coordinates from one system to another and vice versa. The paper describes coordinate transformations from Gauss-Kruger coordinate system ellipsoid Bessel to UTM projection WGS84 ellipsoid and vice versa, and also an application which provides transformation of its kind that is made using open source environment. Name of the application is TRANS7_GK_UTM_GK and it can be found and used on the web page of the faculty for Mining and Geology under the link http://gk2utm.rgf.bg.ac.rs with a user guide.

Transforming an idea into a scholarly project.

Science.gov (United States)

Ng, Lillian; Cullum, Sarah; Cheung, Gary; Friedman, Susan Hatters

2018-04-01

This article describes components of a workshop designed to orientate psychiatric trainees to the task of conducting a scholarly project. The aims are: to promote an approach that incorporates principles of adult learning to guide trainees who are undertaking research; to allow trainees to transform their ideas into more tangible research questions; and to enable supervisors to reflect on delivering similar content in scholarly project workshops. The workshop comprised: creating a safe space to explore ideas; discussing the process of posing a question or hypothesis; using group interactions to generate concepts; and considering personal values that influence the choice of research methodology to answer a question. Examples are provided from the workshop. The process enabled trainees to generate and distil ideas into more concrete questions and methods in three phases: introductory, exploratory and tangible. Adult learning principles may assist trainees to develop their ideas for a scholarly project into research questions that are relevant to clinical practice. Harnessing the creative potential of a peer collective may encourage deeper inquiry, shifts to a tangible output and a sustained interest in research.

FJET Database Project: Extract, Transform, and Load

Science.gov (United States)

Samms, Kevin O.

2015-01-01

The Data Mining & Knowledge Management team at Kennedy Space Center is providing data management services to the Frangible Joint Empirical Test (FJET) project at Langley Research Center (LARC). FJET is a project under the NASA Engineering and Safety Center (NESC). The purpose of FJET is to conduct an assessment of mild detonating fuse (MDF) frangible joints (FJs) for human spacecraft separation tasks in support of the NASA Commercial Crew Program. The Data Mining & Knowledge Management team has been tasked with creating and managing a database for the efficient storage and retrieval of FJET test data. This paper details the Extract, Transform, and Load (ETL) process as it is related to gathering FJET test data into a Microsoft SQL relational database, and making that data available to the data users. Lessons learned, procedures implemented, and programming code samples are discussed to help detail the learning experienced as the Data Mining & Knowledge Management team adapted to changing requirements and new technology while maintaining flexibility of design in various aspects of the data management project.

Emission projections of the transport Sector in China: 2015-2040

Science.gov (United States)

Yan, L.

2016-12-01

Driven by the significant growth freight and passenger transport demand, transport sector has become a sector that is largely responsible for increases in emissions of atmospheric pollutants (NOx, CO, HC, PM2.5) in China. Figuring out the emission trend in China's transport sector has great influence on formulating emission reduction measures in the future. In this work, both on-road and off-road transport emissions in China were estimated from 2015 to 2040 for CO, NOx, HC and PM2.5. The projection was conducted based on on the energy consumption structure forecast from IEA (International Energy Agency), the future national average annual distance traveled per vehicle and fuel consumption per distance derived from simulation results of the Fuel Economy and Environmental Impact (FEEI) model. The results show that the ownership of on-road vehicles in China increases rapidly during 2015 to 2030 and then the growth slows down. Finally, the total amount reaches up to 522 million in 2040 in which 84.5% turns out to be light-duty vehicles. Because current control legislations for the transport sector in China will continue to be strengthened in the future, the total emissions of China's transport sector were projected to peak around 2030, due to the improvement of vehicle emission standard and the retirement of old vehicles are the most effective measures. The off-road transport will become the main contributor to emissions from transport sector in China since 2030. This work provides a new perspective to understand emissions from both on-road and off-road transport in China, which can support the achievement of improving air quality promised by the Chinese government. This work provides a new perspective to understand the emission trends of on-road and off-road transport sector in China from 2015 to 2040, which can support the achievement of the air quality goal promised by the Chinese government. Driven by the significant growth freight and passenger transport demand

Future fire emissions associated with projected land use change in Indonesia

Science.gov (United States)

Marlier, M. E.; DeFries, R. S.; Pennington, D.; Ordway, E.; Nelson, E.; Mickley, L.; Koplitz, S.

2013-12-01

Indonesia has experienced rapid land use change in past decades as forests and peatlands are cleared for agricultural development, including oil palm and timber plantations1. Fires are the predominant method of clearing and the subsequent emissions can have important public health impacts by contributing to regional particulate matter and ozone concentrations2. This regional haze was dramatically seen in Singapore during June 2013 due to the transport of emissions from fires in Sumatra. Our study is part of a larger project that will quantify the public health impact of various land use development scenarios for Sumatra over the coming decades. Here, we describe how we translate economic projections of land use change into future fire emissions inventories for GEOS-Chem atmospheric transport simulations. We relate past GFED3 fire emissions3 to detailed 1-km land use change data and MODIS fire radiative power observations, and apply these relationships to future estimates of land use change. The goal of this interdisciplinary project is to use modeling results to interact with policy makers and influence development strategies in ways that protect public health. 1Miettinen et al. 2011. Deforestation rates in insular Southeast Asia between 2000 and 2010. Glob. Change Biol.,17 (7), 2261-2270. 2Marlier et al. 2013. El Niño and health risks from landscape fire emissions in southeast Asia. Nature Clim. Change, 3, 131-136. 3van der Werf et al. 2010. Global fire emissions and the contribution of deforestation, savanna, forest, agricultural, and peat fires (1997-2009). Atmos. Chem. Physics, 10 (23), 11707-11735.

Experimental studies on particle emissions from cruising ship, their characteristic properties, transformation and atmospheric lifetime in the marine boundary layer

Science.gov (United States)

Petzold, A.; Hasselbach, J.; Lauer, P.; Baumann, R.; Franke, K.; Gurk, C.; Schlager, H.; Weingartner, E.

2008-05-01

Particle emissions from ship engines and their atmospheric transformation in the marine boundary layer (MBL) were investigated in engine test bed studies and in airborne measurements of expanding ship plumes. During the test rig studies, detailed aerosol microphysical and chemical properties were measured in the exhaust gas of a serial MAN B&W seven-cylinder four-stroke marine diesel engine under various load conditions. The emission studies were complemented by airborne aerosol transformation studies in the plume of a large container ship in the English Channel using the DLR aircraft Falcon 20 E-5. Observations from emission studies and plume studies combined with a Gaussian plume dispersion model yield a consistent picture of particle transformation processes from emission to atmospheric processing during plume expansion. Particulate matter emission indices obtained from plume measurements are 8.8±1.0×1015(kg fuel)-1 by number for non-volatile particles and 174±43 mg (kg fuel)-1 by mass for Black Carbon (BC). Values determined for test rig conditions between 85 and 110% engine load are of similar magnitude. For the total particle number including volatile compounds no emission index can be derived since the volatile aerosol fraction is subject to rapid transformation processes in the plume. Ship exhaust particles occur in the size range Dp<0.3 μm, showing a bi-modal structure. The combustion particle mode is centred at modal diameters of 0.05 μm for raw emissions to 0.10 μm at a plume age of 1 h. The smaller-sized volatile particle mode is centred at Dp≤0.02 μm. From the decay of ship exhaust particle number concentrations in an expanding plume, a maximum plume life time of approx. 24 h is estimated for a well-mixed marine boundary layer.

Failure of large transformation projects from the viewpoint of complex adaptive systems: Management principles for dealing with project dynamics

NARCIS (Netherlands)

Janssen, M.; Voort, H. van der; Veenstra, A.F.E. van

2015-01-01

Many large transformation projects do not result in the outcomes desired or envisioned by the stakeholders. This type of project is characterised by dynamics which are both caused by and result of uncertainties and unexpected behaviour. In this paper a complex adaptive system (CAS) view was adopted

Innovations in projecting emissions for air quality modeling ...

Science.gov (United States)

Air quality modeling is used in setting air quality standards and in evaluating their costs and benefits. Historically, modeling applications have projected emissions and the resulting air quality only 5 to 10 years into the future. Recognition that the choice of air quality management strategy has climate change implications is encouraging longer modeling time horizons. However, for multi-decadal time horizons, many questions about future conditions arise. For example, will current population, economic, and land use trends continue, or will we see shifts that may alter the spatial and temporal pattern of emissions? Similarly, will technologies such as building-integrated solar photovoltaics, battery storage, electric vehicles, and CO2 capture emerge as disruptive technologies - shifting how we produce and use energy - or will these technologies achieve only niche markets and have little impact? These are some of the questions that are being evaluated by researchers within the U.S. EPA’s Office of Research and Development. In this presentation, Dr. Loughlin will describe a range of analytical approaches that are being explored. These include: (i) the development of alternative scenarios of the future that can be used to evaluate candidate management strategies over wide-ranging conditions, (ii) the application of energy system models to project emissions decades into the future and to assess the environmental implications of new technologies, (iii) and methodo

Optimal transformations leading to normal distributions of positron emission tomography standardized uptake values

Science.gov (United States)

Scarpelli, Matthew; Eickhoff, Jens; Cuna, Enrique; Perlman, Scott; Jeraj, Robert

2018-02-01

The statistical analysis of positron emission tomography (PET) standardized uptake value (SUV) measurements is challenging due to the skewed nature of SUV distributions. This limits utilization of powerful parametric statistical models for analyzing SUV measurements. An ad-hoc approach, which is frequently used in practice, is to blindly use a log transformation, which may or may not result in normal SUV distributions. This study sought to identify optimal transformations leading to normally distributed PET SUVs extracted from tumors and assess the effects of therapy on the optimal transformations. Methods. The optimal transformation for producing normal distributions of tumor SUVs was identified by iterating the Box-Cox transformation parameter (λ) and selecting the parameter that maximized the Shapiro-Wilk P-value. Optimal transformations were identified for tumor SUVmax distributions at both pre and post treatment. This study included 57 patients that underwent 18F-fluorodeoxyglucose (18F-FDG) PET scans (publically available dataset). In addition, to test the generality of our transformation methodology, we included analysis of 27 patients that underwent 18F-Fluorothymidine (18F-FLT) PET scans at our institution. Results. After applying the optimal Box-Cox transformations, neither the pre nor the post treatment 18F-FDG SUV distributions deviated significantly from normality (P  >  0.10). Similar results were found for 18F-FLT PET SUV distributions (P  >  0.10). For both 18F-FDG and 18F-FLT SUV distributions, the skewness and kurtosis increased from pre to post treatment, leading to a decrease in the optimal Box-Cox transformation parameter from pre to post treatment. There were types of distributions encountered for both 18F-FDG and 18F-FLT where a log transformation was not optimal for providing normal SUV distributions. Conclusion. Optimization of the Box-Cox transformation, offers a solution for identifying normal SUV transformations for when

Chemical and physical transformations of organic aerosol from the photo-oxidation of open biomass burning emissions in an environmental chamber

Directory of Open Access Journals (Sweden)

C. J. Hennigan

2011-08-01

Full Text Available Smog chamber experiments were conducted to investigate the chemical and physical transformations of organic aerosol (OA during photo-oxidation of open biomass burning emissions. The experiments were carried out at the US Forest Service Fire Science Laboratory as part of the third Fire Lab at Missoula Experiment (FLAME III. We investigated emissions from 12 different fuels commonly burned in North American wildfires. The experiments feature atmospheric and plume aerosol and oxidant concentrations; aging times ranged from 3 to 4.5 h. OA production, expressed as a mass enhancement ratio (ratio of OA to primary OA (POA mass, was highly variable. OA mass enhancement ratios ranged from 2.9 in experiments where secondary OA (SOA production nearly tripled the POA concentration to 0.7 in experiments where photo-oxidation resulted in a 30 % loss of the OA mass. The campaign-average OA mass enhancement ratio was 1.7 ± 0.7 (mean ± 1σ; therefore, on average, there was substantial SOA production. In every experiment, the OA was chemically transformed. Even in experiments with net loss of OA mass, the OA became increasingly oxygenated and less volatile with aging, indicating that photo-oxidation transformed the POA emissions. Levoglucosan concentrations were also substantially reduced with photo-oxidation. The transformations of POA were extensive; using levoglucosan as a tracer for POA, unreacted POA only contributed 17 % of the campaign-average OA mass after 3.5 h of exposure to typical atmospheric hydroxyl radical (OH levels. Heterogeneous reactions with OH could account for less than half of this transformation, implying that the coupled gas-particle partitioning and reaction of semi-volatile vapors is an important and potentially dominant mechanism for POA processing. Overall, the results illustrate that biomass burning emissions are subject to extensive chemical processing in the atmosphere, and the timescale for these transformations is rapid.

Syncrude emissions reduction project

Energy Technology Data Exchange (ETDEWEB)

Fiedler, M.A. [Alstom Power Inc., Knoxville, TN (United States); Ibbotson, P. [Syncrude Canada Ltd., Calgary, AB (Canada)

2008-07-01

This paper described an emissions reduction project conducted by Syncrude Canada and various other companies currently developing and processing oil sands in Alberta. Syncrude's upgrader expansion program included the installation of an ammonia-based wet flue gas desulfurizer (FGD) designed to remove sulphur dioxide (SO{sub 2}) from a coker train. Syncrude is also installing the FGD technology at its existing plants. It is expected that installation of the FGDs will reduced total site emissions of SO{sub 2} by 60 per cent. The fluid cokers are used to crack the long hydrocarbon chain bitumen molecules into shorter molecules. It is expected that the FGD system will also reduce particulate and SO{sub 3} levels. The FGD system was selected after an evaluation of technologies used by the coal-fired power industry. A dry FGD system was selected to operate above the water saturation temperature of the flue gas. Calcium oxide was used as a reagent. Hot gas was quenched in a spray dryer absorber with a slurry of calcium hydroxide. Rotary atomizers were used to developer uniform droplets of slurry. The system's fabric filter was a low ratio reverse gas-cleaned unit. Particulate matter from the gases was deposited on the interior of the filter bags. Clean hot gas was drawn through reverse gas fans into a reverse gas manifold. A timeline of the FGD technology installation process was included. 3 tabs., 28 figs.

Experimental studies on particle emissions from cruising ship, their characteristic properties, transformation and atmospheric lifetime in the marine boundary layer

Directory of Open Access Journals (Sweden)

A. Petzold

2008-05-01

Full Text Available Particle emissions from ship engines and their atmospheric transformation in the marine boundary layer (MBL were investigated in engine test bed studies and in airborne measurements of expanding ship plumes. During the test rig studies, detailed aerosol microphysical and chemical properties were measured in the exhaust gas of a serial MAN B&W seven-cylinder four-stroke marine diesel engine under various load conditions. The emission studies were complemented by airborne aerosol transformation studies in the plume of a large container ship in the English Channel using the DLR aircraft Falcon 20 E-5. Observations from emission studies and plume studies combined with a Gaussian plume dispersion model yield a consistent picture of particle transformation processes from emission to atmospheric processing during plume expansion. Particulate matter emission indices obtained from plume measurements are 8.8±1.0×10¹⁵(kg fuel⁻¹ by number for non-volatile particles and 174±43 mg (kg fuel⁻¹ by mass for Black Carbon (BC. Values determined for test rig conditions between 85 and 110% engine load are of similar magnitude. For the total particle number including volatile compounds no emission index can be derived since the volatile aerosol fraction is subject to rapid transformation processes in the plume. Ship exhaust particles occur in the size range D_p<0.3 μm, showing a bi-modal structure. The combustion particle mode is centred at modal diameters of 0.05 μm for raw emissions to 0.10 μm at a plume age of 1 h. The smaller-sized volatile particle mode is centred at D_p≤0.02 μm. From the decay of ship exhaust particle number concentrations in an expanding plume, a maximum plume life time of approx. 24 h is estimated for a well-mixed marine boundary layer.

LOCATION ANALYSIS ON SMART HOUSE USING PROJECTIVE TRANSFORMATION

Directory of Open Access Journals (Sweden)

Galih Andi Pradana

2014-08-01

Full Text Available In this paper, a method of location analysis for smart house is proposed. The proposed method uses projective transformation to process the input from visual sensor for determining coordinate of resident and also the entire device inside the smart house. With a good calculated coordinate, each device function in the smart house can be optimized for the good of the resident. From the experiment results, the proposed method successfully maps all coordinates of any device in the smart house up to 81% accuracy.

GHG emission quantification for pavement construction projects using a process-based approach

Directory of Open Access Journals (Sweden)

Charinee Limsawasd

2017-03-01

Full Text Available Climate change and greenhouse gas (GHG emissions have attracted much attention for their impacts upon the global environment. Initiating of new legislation and regulations for control of GHG emissions from the industrial sectors has been applied to address this problem. The transportation industries, which include operation of road pavement and pavement construction equipment, are the highest GHG-emitting sectors. This study presents a novel quantification model of GHG emissions of pavement construction using process-based analysis. The model is composed of five modules that evaluate GHG emissions. These are: material production and acquisition, (2 material transport to a project site, (3 heavy equipment use, (4 on-site machinery use, and, (5 on-site electricity use. The model was applied to a hypothetical pavement project to compare the environmental impacts of flexible and rigid pavement types during construction. The resulting model can be used for evaluation of environmental impacts, as well as for designing and planning highway pavement construction.

Incorporating regional growth into forecasts of greenhouse gas emissions from project-level residential and commercial development

International Nuclear Information System (INIS)

Rowangould, Dana; Eldridge, Melody; Niemeier, Deb

2013-01-01

To better understand the greenhouse gas (GHG) implications of land use planning decisions, regional planning organizations have developed tools to forecast the emissions from project-level residential and commercial development. This paper reviews the state of GHG emissions forecasting methods for project-level development. We argue that when forecasting changes in regional emissions it is important to make explicit what is assumed about a project′s effect on the population of residents and businesses in the region. We present five regional growth assumptions capturing the range of ways that project-level development might influence (i) construction and occupancy of similar developments elsewhere in a region and (ii) relocation of the initial activities that occur on-site before the project is built. We show that current forecasting tools inconsistently address the latter when they are interpreted as forecasted changes in regional emissions. Using a case study in Yolo County, California we demonstrate that forecasted changes in regional emissions are greatly affected by the regional growth assumption. In the absence of information about which regional growth assumption is accurate, we provide guidelines for selection of a conservative regional growth assumption. - Highlights: • Current tools inconsistently forecast GHG emissions from project-level development. • We outline five assumptions about how projects may affect regional growth. • Our assumptions capture a range of economic and population effects of projects. • Our case study shows that growth assumptions greatly affect regional GHG estimates. • We provide guidelines for selecting a conservative regional growth assumption

Coordinate transformations, orthographic projections, and robot kinematics

International Nuclear Information System (INIS)

Crochetiere, W.J.

1984-01-01

Humans do not consciously think of moving each of their joints while they move their hands from one place to another. Likewise, robot arms can be commanded to move about in cartesian space without the need to address the individual joints. To do this, the direct and inverse kinematic equations of any robot arm must be derived. The direct kinematic equations uniquely transform the joint positions into the position (and orientation) of the hand, whereas the inverse kinematic equations transform the position (and orientation) of the hand into joint positions. The derivation of the inverse kinematic equations for any particular robot is a difficult problem which may have more than one solution. In this paper, these equations are derived for a six degree of freedom robot arm. A combination of matrix operations to perform coordinate rotations, and trigonometry within the appropriate orthographic projects to perform coordinate translations is employed. This complementary approach yields a solution which is more easily obtained, and also more easily visualized. The resulting solution was programmed into a real-time computer as a part of a higher level software system to control the motion of the arm

Measuring techniques in emission computed tomography

International Nuclear Information System (INIS)

Jordan, K.; Knoop, B.

1988-01-01

The chapter reviews the historical development of the emission computed tomography and its basic principles, proceeds to SPECT and PET, special techniques of emission tomography, and concludes with a comprehensive discussion of the mathematical fundamentals of the reconstruction and the quantitative activity determination in vivo, dealing with radon transformation and the projection slice theorem, methods of image reconstruction such as analytical and algebraic methods, limiting conditions in real systems such as limited number of measured data, noise enhancement, absorption, stray radiation, and random coincidence. (orig./HP) With 111 figs., 6 tabs [de

Life Cycle Energy Consumption and Greenhouse Gas Emissions Analysis of Natural Gas-Based Distributed Generation Projects in China

Directory of Open Access Journals (Sweden)

Hansi Liu

2017-10-01

Full Text Available In this paper, we used the life-cycle analysis (LCA method to evaluate the energy consumption and greenhouse gas (GHG emissions of natural gas (NG distributed generation (DG projects in China. We took the China Resources Snow Breweries (CRSB NG DG project in Sichuan province of China as a base scenario and compared its life cycle energy consumption and GHG emissions performance against five further scenarios. We found the CRSB DG project (all energy input is NG can reduce GHG emissions by 22%, but increase energy consumption by 12% relative to the scenario, using coal combined with grid electricity as an energy input. The LCA also indicated that the CRSB project can save 24% of energy and reduce GHG emissions by 48% relative to the all-coal scenario. The studied NG-based DG project presents major GHG emissions reduction advantages over the traditional centralized energy system. Moreover, this reduction of energy consumption and GHG emissions can be expanded if the extra electricity from the DG project can be supplied to the public grid. The action of combining renewable energy into the NG DG system can also strengthen the dual merit of energy conservation and GHG emissions reduction. The marginal CO2 abatement cost of the studied project is about 51 USD/ton CO2 equivalent, which is relatively low. Policymakers are recommended to support NG DG technology development and application in China and globally to boost NG utilization and control GHG emissions.

The Human Genome Project: big science transforms biology and medicine.

Science.gov (United States)

Hood, Leroy; Rowen, Lee

2013-01-01

The Human Genome Project has transformed biology through its integrated big science approach to deciphering a reference human genome sequence along with the complete sequences of key model organisms. The project exemplifies the power, necessity and success of large, integrated, cross-disciplinary efforts - so-called 'big science' - directed towards complex major objectives. In this article, we discuss the ways in which this ambitious endeavor led to the development of novel technologies and analytical tools, and how it brought the expertise of engineers, computer scientists and mathematicians together with biologists. It established an open approach to data sharing and open-source software, thereby making the data resulting from the project accessible to all. The genome sequences of microbes, plants and animals have revolutionized many fields of science, including microbiology, virology, infectious disease and plant biology. Moreover, deeper knowledge of human sequence variation has begun to alter the practice of medicine. The Human Genome Project has inspired subsequent large-scale data acquisition initiatives such as the International HapMap Project, 1000 Genomes, and The Cancer Genome Atlas, as well as the recently announced Human Brain Project and the emerging Human Proteome Project.

Inventory and projection of greenhouse gases emissions for Sumatera Utara Province

Science.gov (United States)

Ambarita, H.; Soeharwinto; Ginting, N.; Basyuni, M.; Zen, Z.

2018-03-01

Greenhouse Gases (GHGs) emissions which result in global warming is a serious problem for the human being. Total globally anthropogenic GHG emissions were the highest in the history of the year 2000 to 2010 and reached 49 (4.5) Giga ton CO2eq per year in 2010. Many governments addressed their commitment to reducing GHG emission. The Government of Indonesia (GoI) has released a target in reducing its GHG emissions by 26% from level business as usual by 2020, and this target can be increased up to 41% by international aid. In this study, the GHG emissions for Sumatera Utara province are assessed and divided into six sectors. They are Agricultural, Land Use and Forestry, Energy, Transportation, Industrial, and Waste sectors. The results show that total GHG emissions for Sumatera Utara province in the baseline year 2010 is 191.4 million tons CO2eq. The business-as-usual projection of the GHG emission in 2020 is 354.5 million tons CO2eq. Mitigation actions will reduce GHG emissions up to 30.5% from business as usual emission in 2020.

Advanced Petroleum-Based Fuels -- Diesel Emissions Control Project (APBF-DEC): Lubricants Project, Phase 2 Final Report

Energy Technology Data Exchange (ETDEWEB)

2006-06-01

This report summarizes the results of the second phase of a lubricants project, which investigated the impact of engine oil formulation on diesel vehicle emissions and the performance of a nitrogen oxide adsorber catalyst (NAC).

Reference projection energy and emissions. 2012 Update. Energy and emissions for the years 2012, 2020 and 2030

International Nuclear Information System (INIS)

Verdonk, M.; Wetzels, W.

2012-08-01

This report contains estimates of greenhouse gas emissions and air pollutants and the use of renewable energy for the year 2020. An outlook is presented for the year 2030. This estimate is an update of the Reference Projection Energy and Emissions 2010-2020, published in 2010. The goal of the update is to provide insight into the progress in realizing the targets for Dutch policies with regard to climate, air and energy. [nl

Air Emission Projections During Acid Cleaning of F-Canyon Waste Header No.2

International Nuclear Information System (INIS)

CHOI, ALEXANDER

2004-01-01

The purpose of this study was to develop the air emission projections for the maintenance operation to dissolve and flush out the scale material inside the F-Canyon Waste Header No.2. The chemical agent used for the dissolution is a concentrated nitric acid solution, so the pollutant of concern is the nitric acid vapor. Under the very conservative operating scenarios considered in this study, it was determined that the highest possible rate of nitric acid emission during the acid flush would be 0.048 lb. per hr. It turns out that this worst-case air emission projection is just below the current exemption limit of 0.05 lb. per hr. for permit applications

Effect of number of of projections on inverse radon transform based image reconstruction by using filtered back-projection for parallel beam transmission tomography

International Nuclear Information System (INIS)

Qureshi, S.A.; Mirza, S.M.; Arif, M.

2007-01-01

This paper present the effect of number of projections on inverse Radon transform (IRT) estimation using filtered back-projection (FBP) technique for parallel beam transmission tomography. The head phantom and the lung phantom have been used in this work. Various filters used in this study include Ram-Lak, Shepp-Logan, Cosin, Hamming and Hanning filters. The slices have been reconstructed by increasing the number of projections through parallel beam transmission tomography keeping the projections uniformly distributed. The Euclidean and Mean Squared errors and peak signal-to-noise ratio (PSNR) have been analyzed for their sensitiveness as functions of number of projections. It has found that image quality improves with the number of projections but at the cost of the computer time. The error has been minimized to get the best approximation of inverse Radon transform (IRT) as the number of projections is enhanced. The value of PSNR has been found to increase from 8.20 to 24.53 dB as the number of projections is raised from 5 to 180 for head phantom. (author)

Emissions from decentralised CHP plants 2007 - Energinet.dk Environmental project no. 07/1882

DEFF Research Database (Denmark)

Nielsen, Malene; Nielsen, Ole-Kenneth; Thomsen, Marianne

Updated emission factors for decentralised combined heat and power (CHP) plants with a capacity project emission measurements as well as emission measurements performed in recent years that were collected. The emission factors valid for 2006/2007 have been...... estimated for the plant technologies: Municipal solid waste (MSW) incineration plants, plants combusting straw or wood, natural gas fuelled reciprocating engines, biogas fuelled engines, natural gas fuelled gas turbines, gas oil fuelled reciprocating engines, gas oil fuelled gas turbines, steam turbines...

Acoustic emission technique for characterisation of deformation, fatigue, fracture and phase transformation and for leak detection with high sensitivity- our experiences

International Nuclear Information System (INIS)

Jayakumar, T.; Mukhopadhyay, C.K.; Baldev Raj

1996-01-01

Acoustic emission technique has been used for studying tensile deformation, fracture behaviour, detection and assessment of fatigue crack growth and α-martensite phase transformation in austenitic alloys. A methodology for amplification of weak acoustic emission signals has been established. Acoustic emission technique with advanced spectral analysis has enabled detection with high sensitivity of minute leaks in noisy environments. (author)

Air Pollutant Emissions Projections for the Cement and Steel Industry in China and the Impact of Emissions Control Technologies

Energy Technology Data Exchange (ETDEWEB)

Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Khanna, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-03-01

China’s cement and steel industry accounts for approximately half of the world’s total cement and steel production. These two industries are two of the most energy-intensive and highest carbon dioxide (CO₂)-emitting industries and two of the key industrial contributors to air pollution in China. For example, the cement industry is the largest source of particulate matter (PM) emissions in China, accounting for 40 percent of its industrial PM emissions and 27 percent of its total national PM emissions. The Chinese steel industry contributed to approximately 20 percent of sulfur dioxide (SO_{2) emissions and 27 percent of PM emissions for all key manufacturing industries in China in 2013. In this study, we analyzed and projected the total PM and SO2 emissions from the Chinese cement and steel industry from 2010–2050 under three different scenarios: a Base Case scenario, an Advanced scenario, and an Advanced EOP (end-of-pipe) scenario. We used bottom-up emissions control technologies data and assumptions to project the emissions. In addition, we conducted an economic analysis to estimate the cost for PM emissions reductions in the Chinese cement industry using EOP control technologies, energy efficiency measures, and product change measures. The results of the emissions projection showed that there is not a substantial difference in PM emissions between the Base Case and Advanced scenarios, for both the cement and steel industries. This is mainly because PM emissions in the cement industry caused mainly by production process and not the fuel use. Since our forecast for the cement production in the Base Case and Advanced scenarios are not too different from each other, this results in only a slight difference in PM emissions forecast for these two scenarios. Also, we assumed a similar share and penetration rate of control technologies from 2010 up to 2050 for these two scenarios for the cement and steel industry. However, the Advanced EOP}

Beyond emission targets: how to strengthen the ambition of NDCs? Results of the MILES project informing the 2018 Facilitative Dialogue

International Nuclear Information System (INIS)

2017-09-01

The Paris Agreement creates a process based on cycles to promote the revision by Parties of their Nationally Determined Contributions (NDCs). This process is primarily aimed at supporting an increase of national emission reduction targets in successive NDC submissions to progressively align them with the goal to limit global average temperature increase to 'well below 2 deg. C'. The UNFCCC 2018 Facilitative Dialogue (FD) is the first milestone of this process, in which Parties will collectively take stock of climate action and identify options to update their NDCs by 2020. This report contributes to the preparation of the 2018 FD by presenting insights from the Modelling and Informing Low Emission Strategies (MILES) project (see box 1, page 4). This research builds on analyses of climate action from a simultaneously national and global perspective, articulating the 2030 time frame of the NDCs with mid-century strategies, and capturing the link between low-emission pathways and national socio-economic circumstances, policy priorities and development objectives. The country-specific analyses supporting these insights do not aim at assessing the ambition of individual countries' commitments. Rather, they illustrate potentially common issues across different countries in how they define and implement their own commitments and, therefore, what useful and universally applicable messages can be derived from these analyses as a whole. Key messages: - A credible transition towards the Paris long-term goal requires deeper emission reductions before 2030. - Countries should identify the sectoral transformations required to implement the emission targets. - A smooth transition towards 2 deg. C requires an acceleration of investment shifts in the energy sector before 2030. - The diffusion of key emerging low-carbon technologies should strongly accelerate. This requires an early scale-up of international collaboration on innovation and targeted policy incentives

Environmental cost of distribution transformer losses

International Nuclear Information System (INIS)

Georgilakis, Pavlos S.

2011-01-01

Improvements in energy efficiency of electrical equipment reduce the greenhouse gas (GHG) emissions and contribute to the protection of the environment. Moreover, as system investment and energy costs continue to increase, electric utilities are increasingly interested in installing energy-efficient transformers at their distribution networks. This paper analyzes the impact of the environmental cost of transformer losses on the economic evaluation of distribution transformers. This environmental cost is coming form the cost to buy GHG emission credits because of the GHG emissions associated with supplying transformer losses throughout the transformer lifetime. Application results on the Hellenic power system for 21 transformer offers under 9 different scenarios indicate that the environmental cost of transformer losses can reach on average 34% and 8% of transformer purchasing price for high loss and medium loss transformers, respectively. That is why it is important to incorporate the environmental cost of transformer losses into the economic evaluation of distribution transformers.

Vibration-rotation spectrum of BH X1Σ+ by Fourier transform emission spectroscopy

Science.gov (United States)

Pianalto, F. S.; O'Brien, L. C.; Keller, P. C.; Bernath, P. F.

1988-06-01

The vibration-rotation emission spectrum of the BH X1Σ+ state was observed with the McMath Fourier transform spectrometer at Kitt Peak. The 1-0, 2-1, and 3-2 bands were observed in a microwave discharge of B2H6 in He. Spectroscopic constants of the individual vibrational levels and equilibrium molecular constants were determined. An RKR potential curve was calculated from the equilibrium constants. Alfred P. Sloan Fellow; Camille and Henry Dreyfus Teacher-Scholar.

Projection of SO{sub 2}, NO{sub X}, NH{sub 3} and particle emissions - 2010-2030

Energy Technology Data Exchange (ETDEWEB)

Nielsen, O -K; Plejdrup, M; Winther, M; Hjorth Mikkelsen, M; Albrektsen, R; Nielsen, M; Fauser, P; Hoffmann, L; Hjelgaard, K; Gyldenkaerne, S

2012-01-15

This report contains a description of models and background data for projection of SO{sub 2}, NO{sub x}, NH{sub 3}, NMVOC, TSP, PM{sub 10} and PM{sub 25} for Denmark. The emissions are projected to 2030 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts of activity rates are used in the models for those sectors for which the forecasts are available, i.e. the latest official forecast from the Danish Energy Agency. The emission factors refer either to international guidelines or are country-specific and refer to Danish legislation, Danish research reports or calculations based on emission data from a considerable number of plants. The projection models are based on the same structure and method as the Danish emission inventories in order to ensure consistency. (Author)

Battery-Powered Electric and Hybrid Electric Vehicle Projects to Reduce Greenhouse Gas Emissions: A Resource for Project Development

Energy Technology Data Exchange (ETDEWEB)

National Energy Technology Laboratory

2002-07-31

as requiring specific technology improvements or an increase in fuel efficiency. Site-specific project activities can also be undertaken to help decrease GHG emissions, although the use of such measures is less common. Sample activities include switching to less GHG-intensive vehicle options, such as electric vehicles (EVs) or hybrid electric vehicles (HEVs). As emissions from transportation activities continue to rise, it will be necessary to promote both types of abatement activities in order to reverse the current emissions path. This Resource Guide focuses on site- and project-specific transportation activities. .

Chemical and physical transformations of organic aerosol from the photo-oxidation of open biomass burning emissions in an environmental chamber

Science.gov (United States)

C. J. Hennigan; M. A. Miracolo; G. J. Engelhart; A. A. May; A. A. Presto; T. Lee; A. P. Sullivan; G. R. McMeeking; H. Coe; C. E. Wold; W.-M. Hao; J. B. Gilman; W. C. Kuster; J. de Gouw; B. A. Schichtel; J. L. Collett; S. M. Kreidenweis; A. L. Robinson

2011-01-01

Smog chamber experiments were conducted to investigate the chemical and physical transformations of organic aerosol (OA) during photo-oxidation of open biomass burning emissions. The experiments were carried out at the US Forest Service Fire Science Laboratory as part of the third Fire Lab at Missoula Experiment (FLAME III). We investigated emissions from 12 different...

Trends and Projected Estimates of GHG Emissions from Indian Livestock in Comparisons with GHG Emissions from World and Developing Countries

Directory of Open Access Journals (Sweden)

Amlan Kumar Patra

2014-04-01

Full Text Available This study presents trends and projected estimates of methane and nitrous oxide emissions from livestock of India vis-à-vis world and developing countries over the period 1961 to 2010 estimated based on IPCC guidelines. World enteric methane emission (EME increased by 54.3% (61.5 to 94.9 ×109 kg annually from the year 1961 to 2010, and the highest annual growth rate (AGR was noted for goat (2.0%, followed by buffalo (1.57% and swine (1.53%. Global EME is projected to increase to 120×109 kg by 2050. The percentage increase in EME by Indian livestock was greater than world livestock (70.6% vs 54.3% between the years 1961 to 2010, and AGR was highest for goat (1.91%, followed by buffalo (1.55%, swine (1.28%, sheep (1.25% and cattle (0.70%. In India, total EME was projected to grow by 18.8×109 kg in 2050. Global methane emission from manure (MEM increased from 6.81 ×109 kg in 1961 to 11.4×109 kg in 2010 (an increase of 67.6%, and is projected to grow to 15×109 kg by 2050. In India, the annual MEM increased from 0.52×109 kg to 1.1×109 kg (with an AGR of 1.57% in this period, which could increase to 1.54×109 kg in 2050. Nitrous oxide emission from manure in India could be 21.4×106 kg in 2050 from 15.3×106 kg in 2010. The AGR of global GHG emissions changed a small extent (only 0.11% from developed countries, but increased drastically (1.23% for developing countries between the periods of 1961 to 2010. Major contributions to world GHG came from cattle (79.3%, swine (9.57% and sheep (7.40%, and for developing countries from cattle (68.3%, buffalo (13.7% and goat (5.4%. The increase of GHG emissions by Indian livestock was less (74% vs 82% over the period of 1961 to 2010 than the developing countries. With this trend, world GHG emissions could reach 3,520×109 kg CO2-eq by 2050 due to animal population growth driven by increased demands for meat and dairy products in the world.

Technical Area V (TA-V) transformation project close-out report.

Energy Technology Data Exchange (ETDEWEB)

2010-07-01

Sandia National Laboratories (SNL) Technical Area V (TA-V) has provided unique nuclear experimental environments for decades. The technologies tested in TA-V facilities have furthered the United States Nuclear Weapons program and has contributed to the national energy and homeland security mission. The importance of TA-V working efficiently to produce an attractive and effective platform for experiments should not be underestimated. Throughout its brief history, TA-V has evolved to address multiple and diverse sets of requirements. These requirements evolved over many years; however, the requirements had not been managed nor communicated comprehensively or effectively. A series of programmatic findings over several years of external audits was evidence of this downfall. Today, these same requirements flow down through a new TA-V management system that produces consistently applied and reproducible approaches to work practices. In 2008, the TA-V department managers assessed the state of TA-V services and work activities to understand how to improve customer interfaces, stakeholders perceptions, and workforce efficiencies. The TA-V management team initiated the TA-V Transformation Project after they deemed the pre-June 2008 operational model to be ineffective in managing work and in providing integrated, continuous improvement to TA-V processes. This report summarizes the TA-V Transformation Project goals, activities, and accomplishments.

Impacts of transportation sector emissions on future U.S. air quality in a changing climate. Part I: Projected emissions, simulation design, and model evaluation.

Science.gov (United States)

Campbell, Patrick; Zhang, Yang; Yan, Fang; Lu, Zifeng; Streets, David

2018-07-01

Emissions from the transportation sector are rapidly changing worldwide; however, the interplay of such emission changes in the face of climate change are not as well understood. This two-part study examines the impact of projected emissions from the U.S. transportation sector (Part I) on ambient air quality in the face of climate change (Part II). In Part I of this study, we describe the methodology and results of a novel Technology Driver Model (see graphical abstract) that includes 1) transportation emission projections (including on-road vehicles, non-road engines, aircraft, rail, and ship) derived from a dynamic technology model that accounts for various technology and policy options under an IPCC emission scenario, and 2) the configuration/evaluation of a dynamically downscaled Weather Research and Forecasting/Community Multiscale Air Quality modeling system. By 2046-2050, the annual domain-average transportation emissions of carbon monoxide (CO), nitrogen oxides (NO x ), volatile organic compounds (VOCs), ammonia (NH 3 ), and sulfur dioxide (SO 2 ) are projected to decrease over the continental U.S. The decreases in gaseous emissions are mainly due to reduced emissions from on-road vehicles and non-road engines, which exhibit spatial and seasonal variations across the U.S. Although particulate matter (PM) emissions widely decrease, some areas in the U.S. experience relatively large increases due to increases in ship emissions. The on-road vehicle emissions dominate the emission changes for CO, NO x , VOC, and NH 3 , while emissions from both the on-road and non-road modes have strong contributions to PM and SO 2 emission changes. The evaluation of the baseline 2005 WRF simulation indicates that annual biases are close to or within the acceptable criteria for meteorological performance in the literature, and there is an overall good agreement in the 2005 CMAQ simulations of chemical variables against both surface and satellite observations. Copyright © 2018

Visualizing Transformation

DEFF Research Database (Denmark)

Pedersen, Pia

2012-01-01

Transformation, defined as the step of extracting, arranging and simplifying data into visual form (M. Neurath, 1974), was developed in connection with ISOTYPE (International System Of TYpographic Picture Education) and might well be the most important legacy of Isotype to the field of graphic...... design. Recently transformation has attracted renewed interest because of the book The Transformer written by Robin Kinross and Marie Neurath. My on-going research project, summarized in this paper, identifies and depicts the essential principles of data visualization underlying the process...... of transformation with reference to Marie Neurath’s sketches on the Bilston Project. The material has been collected at the Otto and Marie Neurath Collection housed at the University of Reading, UK. By using data visualization as a research method to look directly into the process of transformation, the project...

Opportunities and criticisms of voluntary emission reduction projects developed by Public Administrations: Analysis of 143 case studies implemented in Italy

International Nuclear Information System (INIS)

Gallo, Michela; Del Borghi, Adriana; Strazza, Carlo; Parodi, Lara; Arcioni, Livia; Proietti, Stefania

2016-01-01

Highlights: • 143 voluntary emission reduction projects have been analysed. • The projects belong to renewable energy, energy efficiency and transport sectors. • Voluntary emission reduction standards and methodologies have been applied. • The paper identified the main criticisms for each sector. • Energy efficiency projects are the most promising for public entities. - Abstract: The United Nations Framework Convention on Climate Change (UNFCCC) sets an overall framework for intergovernmental efforts to tackle the challenge posed by climate change. Besides the “flexibility mechanisms” defined by the Kyoto Protocol to lower the overall costs of achieving their emissions targets, The Voluntary Green House Gases (GHG) reduction projects can have a lead role in GHG reduction in “non Emissions Trading System ETS sectors”. Nowadays, the voluntary market is characterised by critical aspects, such as fragmentation, lack of accounting, monitoring and validation rules that have led to the low spread of voluntary emission reduction projects developed by local authorities in the European Union despite their high potentiality. The aim of this paper is to test the applicability of voluntary emission reduction projects in the public sector following a homogeneous and consistent pattern. A research has been performed at local level on 143 voluntary emission reduction projects implemented by Public Administrations in Northern and Central Italy in renewable energy, energy efficiency and transport sectors. The applicable standards and methodologies have been checked and the case studies have been analysed though a three-step process: Preliminary additionality assessment; Projects selection; Validation of the selected project. The assessment shows that energy efficiency projects, once overcoming additionality issues, are the most promising for public entities while renewable energy and transport projects resulted to be mainly affected by double counting problems and

Greenhouse Emission Reductions and Natural Gas Vehicles: A Resource Guide on Technology Options and Project Development

Energy Technology Data Exchange (ETDEWEB)

Orestes Anastasia; NAncy Checklick; Vivianne Couts; Julie Doherty; Jette Findsen; Laura Gehlin; Josh Radoff

2002-09-01

Accurate and verifiable emission reductions are a function of the degree of transparency and stringency of the protocols employed in documenting project- or program-associated emissions reductions. The purpose of this guide is to provide a background for law and policy makers, urban planners, and project developers working with the many Greenhouse Gas (GHG) emission reduction programs throughout the world to quantify and/or evaluate the GHG impacts of Natural Gas Vehicle (NGVs). In order to evaluate the GHG benefits and/or penalties of NGV projects, it is necessary to first gain a fundamental understanding of the technology employed and the operating characteristics of these vehicles, especially with regard to the manner in which they compare to similar conventional gasoline or diesel vehicles. Therefore, the first two sections of this paper explain the basic technology and functionality of NGVs, but focus on evaluating the models that are currently on the market with their similar conventional counterparts, including characteristics such as cost, performance, efficiency, environmental attributes, and range. Since the increased use of NGVs, along with Alternative Fuel Vehicle (AFVs) in general, represents a public good with many social benefits at the local, national, and global levels, NGVs often receive significant attention in the form of legislative and programmatic support. Some states mandate the use of NGVs, while others provide financial incentives to promote their procurement and use. Furthermore, Federal legislation in the form of tax incentives or procurement requirements can have a significant impact on the NGV market. In order to implement effective legislation or programs, it is vital to have an understanding of the different programs and activities that already exist so that a new project focusing on GHG emission reduction can successfully interact with and build on the experience and lessons learned of those that preceded it. Finally, most programs

Projected photovoltaic energy impacts on US CO2 emissions: an integrated energy environmental-economic analysis

International Nuclear Information System (INIS)

Lee, J.C.; Fthenakis, V.M.; Morris, S.C.; Goldstein, G.A.; Moskowitz, P.D.

1997-01-01

The potential role of photovoltaic technologies in reducing carbon dioxide (CO 2 ) emissions in the USA was evaluated using an energy-environment-economic systems model. With a range of assumptions about future scenarios up to 2030, the model results provide an objective quantitative assessment of the prospects for photovoltaics in a competitive market. With the projected improvements in cost and efficiency, photovoltaics will compete favourably as a general source of electricity supply to the grid by about 2010 in southwestern USA. This analysis indicates that photovoltaics has the potential to reach a total installed capacity of 140 GW by the year 2030, and to displace a cumulative 450 million metric tons of carbon emissions from 1995 to 2030. At the projected 2030 capacity, photovoltaics could displace over 64 million metric tons of carbon emissions a year. Under constraints on carbon emissions, photovoltaics becomes more cost effective and would further reduce carbon emissions from the US energy system. (author)

Reviews on current carbon emission reduction technologies and projects and their feasibilities on ships

Science.gov (United States)

Wang, Haibin; Zhou, Peilin; Wang, Zhongcheng

2017-06-01

Concern about global climate change is growing, and many projects and researchers are committed to reducing greenhouse gases from all possible sources. International Maritime (IMO) has set a target of 20% CO2 reduction from shipping by 2020 and also presented a series of carbon emission reduction methods, which are known as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operation Indicator (EEOI). Reviews on carbon emission reduction from all industries indicate that, Carbon Capture and Storage (CCS) is an excellent solution to global warming. In this paper, a comprehensive literature review of EEDI and EEOI and CCS is conducted and involves reviewing current policies, introducing common technologies, and considering their feasibilities for marine activities, mainly shipping. Current projects are also presented in this paper, thereby illustrating that carbon emission reduction has been the subject of attention from all over the world. Two case ship studies indicate the economic feasibility of carbon emission reduction and provide a guide for CCS system application and practical installation on ships.

Evaluation of an open-path fourier-transform infrared spectrometer for monitoring vehicle emissions over a suburban roadway intersection

International Nuclear Information System (INIS)

Einfield, W.

1997-05-01

The ability of an open-path, fourier-transform infrared spectrometer to detect vehicle exhaust emissions approximately 3 meters above the roadway surface at a busy Albuquerque suburban intersection was evaluated in this study. Multiple measurements of carbon monoxide and carbon dioxide were carried out over pathlengths up to 100 meters during the morning commute period on multiple days in the summer of 1993. The carbon monoxide to fuel carbon ratio was computed from all spectral data in order to derive a vehicle fleet average ratio. The data were determined to be normally distributed with an overall carbon monoxide-fuel carbon ratio of 0.15. The 95% confidence interval about the mean was ± 0.009. Day-to-day variation of the mean ratio was determined to be on the order of 3%. The results indicate that anticipated reductions in carbon monoxide emissions following the implementation of a winter-season oxygenated fuel program could be reliably detected with an open-path fourier transform spectrometer. The periodic use of such an instrument may offer a cost-effective means of generating a city-wide carbon monoxide emission budget for vehicles sources

Projections of emissions and removals from the LULUCF sector to 2050

OpenAIRE

Thomson, Amanda; Buys, Gwen; Moxley, Janet; Malcolm, Heath; Henshall, Paul; Broadmeadow, Mark

2017-01-01

Summary for policy makers: • The UK reports projections for the Land Use, Land Use Change and Forestry (LULUCF) sector to inform policy concerning domestic and international climate change commitments. The full projections data are available on the NAEI website (http://naei.defra.gov.uk/reports/reports?report_id=927) • LULUCF activities can result in net annual emissions or removals of greenhouse gases, and changes in carbon stocks in the pools associated with LULUCF. This report prov...

Projections of emissions and removals from the LULUCF sector to 2050

OpenAIRE

Buys, Gwen; Malcolm, Heath; Moxley, Janet; Matthews, Robert; Henshall, Paul

2014-01-01

• The UK is required to report projections for the Land Use, Land Use Change and Forestry (LULUCF) sector for carbon budgets under the UK Climate Change Act, for the European Union Monitoring Mechanism, and for the UN Framework Convention on Climate Change. LULUCF activities can result in net emissions or removals of greenhouse gases, and changes in carbon stocks in the pools associated with LULUCF. This report provides projections at the UK and Devolved Administration (DA) lev...

Influence of carbohydrate addition on nitrogen transformations and greenhouse gas emissions of intensive aquaculture system.

Science.gov (United States)

Hu, Zhen; Lee, Jae Woo; Chandran, Kartik; Kim, Sungpyo; Sharma, Keshab; Khanal, Samir Kumar

2014-02-01

Aquaculture is one of the fastest-growing segments of the food economy in modern times. It is also being considered as an important source of greenhouse gas (GHG) emissions. To date, limited studies have been conducted on GHG emissions from aquaculture system. In this study, daily addition of fish feed and soluble starch at a carbon-to-nitrogen (C/N) ratio of 16:1 (w/w) was used to examine the effects of carbohydrate addition on nitrogen transformations and GHG emissions in a zero-water exchange intensive aquaculture system. The addition of soluble starch stimulated heterotrophic bacterial growth and denitrification, which led to lower total ammonia nitrogen, nitrite and nitrate concentrations in aqueous phase. About 76.2% of the nitrogen output was emitted in the form of gaseous nitrogen (i.e., N2 and N2O) in the treatment tank (i.e., aquaculture tank with soluble starch addition), while gaseous nitrogen accounted for 33.3% of the nitrogen output in the control tank (i.e., aquaculture tank without soluble starch addition). Although soluble starch addition reduced daily N2O emissions by 83.4%, it resulted in an increase of daily carbon dioxide (CO2) emissions by 91.1%. Overall, starch addition did not contribute to controlling the GHG emissions from the aquaculture system. © 2013.

Assessing the Climate Impacts of Cookstove Projects: Issues in Emissions Accounting

Directory of Open Access Journals (Sweden)

Carrie M. Lee

2014-03-01

Full Text Available An estimated 2.6 billion people rely on traditional biomass for home cooking and heating, so improving the efficiency of household cookstoves could provide significant environmental, social and economic benefits. Some researchers have estimated that potential greenhouse gas emission reductions could exceed 1 billion tons of carbon dioxide equivalent (CO2e per year. Carbon finance offers a policy mechanism for realizing some of this potential and could also bring improved monitoring to cookstove projects. However, there are formidable methodological challenges in estimating emission reductions. This paper evaluates the quantification approaches to three key variables in calculating emission impacts: biomass fuel consumption, fraction of non-renewable biomass, and emission factors for fuel consumption. It draws on a literature review as well as on interviews with technical experts and market actors, and identifies lessons learned and knowledge gaps. Key research needs identified include incorporating accounting for uncertainty; development of additional default factors for biomass consumption for baseline stoves; refinement of monitoring approaches for cookstove use; broadened scope of emission factors used for cookstoves; accounting for non-CO2 gases and black carbon; and refinement of estimates and approaches to considering emissions from bioenergy use across methodologies.

Aerosol characterization during project POLINAT

Energy Technology Data Exchange (ETDEWEB)

Hagen, D.E.; Hopkins, A.R.; Paladino, J.D.; Whitefield, P.D. [Missouri Univ., Rolla, MO (United States). Cloud and Aerosol Sciences Lab.; Lilenfeld, H.V. [McDonnell Douglas Aerospace-East, St. Louis, MO (United States)

1997-12-31

The objectives of the aerosol/particulate characterization measurements of project POLINAT (POLlution from aircraft emissions In the North ATlantic flight corridor) are: to search for aerosol/particulate signatures of air traffic emissions in the region of the North Atlantic Flight Corridor; to search for the aerosol/particulate component of large scale enhancement (`corridor effects`) of air traffic related species in the North Atlantic region; to determine the effective emission indices for the aerosol/particulate component of engine exhaust in both the near and far field of aircraft exhaust plumes; to measure the dispersion and transformation of the aerosol/particulate component of aircraft emissions as a function of ambient condition; to characterize background levels of aerosol/particulate concentrations in the North Atlantic Region; and to determine effective emission indices for engine exhaust particulates for regimes beyond the jet phase of plume expansion. (author) 10 refs.

Aerosol characterization during project POLINAT

Energy Technology Data Exchange (ETDEWEB)

Hagen, D E; Hopkins, A R; Paladino, J D; Whitefield, P D [Missouri Univ., Rolla, MO (United States). Cloud and Aerosol Sciences Lab.; Lilenfeld, H V [McDonnell Douglas Aerospace-East, St. Louis, MO (United States)

1998-12-31

The objectives of the aerosol/particulate characterization measurements of project POLINAT (POLlution from aircraft emissions In the North ATlantic flight corridor) are: to search for aerosol/particulate signatures of air traffic emissions in the region of the North Atlantic Flight Corridor; to search for the aerosol/particulate component of large scale enhancement (`corridor effects`) of air traffic related species in the North Atlantic region; to determine the effective emission indices for the aerosol/particulate component of engine exhaust in both the near and far field of aircraft exhaust plumes; to measure the dispersion and transformation of the aerosol/particulate component of aircraft emissions as a function of ambient condition; to characterize background levels of aerosol/particulate concentrations in the North Atlantic Region; and to determine effective emission indices for engine exhaust particulates for regimes beyond the jet phase of plume expansion. (author) 10 refs.

Energy saving and emission reduction: A project of coal-resource integration in Shanxi Province, China

International Nuclear Information System (INIS)

Zhang Jianjun; Fu Meichen; Geng Yuhuan; Tao Jin

2011-01-01

The small or middle coal mines with illegal operations in developing countries or regions can cause bad energy waste and environmental disruption. The project of coal-resource integration in Shanxi Province of China gives a new idea or an approach to energy saving and emission reduction. It is a social- and economic-ecological project. The paper shows the targets of energy saving and emission reduction in Shanxi Province, and analyses the aims, significance, design process and implementation of the integration project. Based on that, the paper discusses the challenges and opportunities the project brings. The analysis shows that the project of coal-resource integration in developing countries or regions can effectively improve mining technologies, collect capital and impel international cooperation and exchange. Finally, the paper analyses the concerns about the future, including the possible problems of implementation period, industrial updating, environmental impact and re-employment. However, the successful integration of coal resources can mitigate energy crisis and climate crisis and promote cleaner production effectively. - Highlights: → Coal-resource integration gives a new idea or an approach to energy saving and emission reduction. → Coal-resource integration mitigates climate crisis and promotes cleaner production. → Coal-resource integration brings challenges and opportunities to traditional mining industries.

Coherent State Projection Operator Representation of Symplectic Transformations as a Loyal Representation of Symplectic Group

Science.gov (United States)

Fan, Hong-Yi; Chen, Jun-Hua

2002-08-01

We find that the coherent state projection operator representation of symplectic transformation constitutes a loyal group representation of symplectic group. The result of successively applying squeezing operators on number state can be easily derived. The project supported by National Natural Science Foundation of China under Grant No. 10575057 and the President Foundation of the Chinese Academy of Sciences

Anomalous acoustic effect during martensitic transformations in titanium nickelide base alloys

International Nuclear Information System (INIS)

Plotnikov, V.A.; Kokhanenko, D.V.

2002-01-01

One carried out experiments to determine effect of external static stress on martensitic transformations and acoustic emission, Martensitic transformations in titanium nickelide base alloys under mechanical stress were determined to change nature of acoustic emission to anomalous one - cycling of transformations under gradual increase of mechanical stress during direct martensitic transformation was followed by increase of acoustic emission energy instead of reduction. The mentioned nature of acoustic emission is indicative of essential effect of external stress on martensitic transformations and energy dissipation during transformations [ru

Emission computerized axial tomography from multiple gamma-camera views using frequency filtering.

Science.gov (United States)

Pelletier, J L; Milan, C; Touzery, C; Coitoux, P; Gailliard, P; Budinger, T F

1980-01-01

Emission computerized axial tomography is achievable in any nuclear medicine department from multiple gamma camera views. Data are collected by rotating the patient in front of the camera. A simple fast algorithm is implemented, known as the convolution technique: first the projection data are Fourier transformed and then an original filter designed for optimizing resolution and noise suppression is applied; finally the inverse transform of the latter operation is back-projected. This program, which can also take into account the attenuation for single photon events, was executed with good results on phantoms and patients. We think that it can be easily implemented for specific diagnostic problems.

Fourier transform infrared emission spectra of MnH and MnD

Science.gov (United States)

Gordon, Iouli E.; Appadoo, Dominique R. T.; Shayesteh, Alireza; Walker, Kaley A.; Bernath, Peter F.

2005-01-01

Fourier transform infrared emission spectra of MnH and MnD were observed in the ground X7Σ + electronic state. The vibration-rotation bands from v = 1 → 0 to v = 3 → 2 for MnH and from v = 1 → 0 to v = 4 → 3 for MnD were recorded at an instrumental resolution of 0.0085 cm -1. Spectroscopic constants were determined for each vibrational level and equilibrium constants were found from a Dunham-type fit. The equilibrium vibrational constant ( ωe) for MnH was found to be 1546.84518(65) cm -1, the equilibrium rotational constant ( Be) is 5.6856789(103) cm -1 and the eqilibrium bond distance ( re) was determined to be 1.7308601(47) Å.

The Fire Locating and Modeling of Burning Emissions (FLAMBE) Project

Science.gov (United States)

Reid, J. S.; Prins, E. M.; Westphal, D.; Richardson, K.; Christopher, S.; Schmidt, C.; Theisen, M.; Eck, T.; Reid, E. A.

2001-12-01

The Fire Locating and Modeling of Burning Emissions (FLAMBE) project was initiated by NASA, the US Navy and NOAA to monitor biomass burning and burning emissions on a global scale. The idea behind the mission is to integrate remote sensing data with global and regional transport models in real time for the purpose of providing the scientific community with smoke and fire products for planning and research purposes. FLAMBE is currently utilizing real time satellite data from GOES satellites, fire products based on the Wildfire Automated Biomass Burning Algorithm (WF_ABBA) are generated for the Western Hemisphere every 30 minutes with only a 90 minute processing delay. We are currently collaborating with other investigators to gain global coverage. Once generated, the fire products are used to input smoke fluxes into the NRL Aerosol Analysis and Prediction System, where advection forecasts are performed for up to 6 days. Subsequent radiative transfer calculations are used to estimate top of atmosphere and surface radiative forcing as well as surface layer visibility. Near real time validation is performed using field data collected by Aerosol Robotic Network (AERONET) Sun photometers. In this paper we fully describe the FLAMBE project and data availability. Preliminary result from the previous year will also be presented, with an emphasis on the development of algorithms to determine smoke emission fluxes from individual fire products. Comparisons to AERONET Sun photometer data will be made.

PREDICTION OF ATMOSPHERIC AIR POLLUTION BY EMISSIONS OF MOTOR TRANSPORT TAKING INTO ACCOUNT THE CHEMICAL TRANSFORMATION OF HARMFUL SUBSTANCES

Directory of Open Access Journals (Sweden)

M. M. Biliaiev

2017-06-01

Full Text Available Purpose. Development of 3D numerical models, which allow us to calculate air pollution process from road transport emissions based on chemical transformation of pollutants. Creating numerical models, which would give the opportunity to predict the level of air pollution in urban areas. Methodology. To address the evaluation of the air pollution problem of emissions of vehicles the equations of aerodynamics and mass transfer were used. In order to solve differential equations of aerodynamics and mass transfer the finite difference methods are used. For the numerical integration of the equation for the velocity potential the method of conditional approximation was applied. The equation for the velocity potential written in difference form, is being split into two equations, and at each step of splitting the unknown value of the potential speed is determined by the explicit scheme of running account and the difference scheme itself is implicit. For the numerical integration of the equation of dispersion of emissions in the atmosphere is used implicit alternating-triangular difference splitting scheme. Emissions from the road are simulated by a series of point sources of a given intensity. The developed numerical models are the basis of established software package.Findings. There were developed 3D numerical models, which belong to the class «diagnostic models». These models take into account the main physical factors affecting the process of dispersion of pollutants in the atmosphere when emissions from road transport taking into account the chemical transformation of pollutants. On the basis of the constructed numerical models a computational experiment to assess the level of air pollution in the street was carried out. Originality. Numerical models that allow you to calculate the 3D aerodynamic of wind flow in urban areas and the process of mass transfer of emissions from the road were developed. The models make it possible to account the

Transformation of soil organics under extreme climate events: a project description

Science.gov (United States)

Blagodatskaya, Evgenia

2017-04-01

Recent climate scenarios predict not only continued global warming but also an increased frequency and intensity of extreme climatic events such as strong changes in temperature and precipitation with unusual regional dynamics. Weather anomalies at European territory of Russia are currently revealed as long-term drought and strong showers in summer and as an increased frequency of soil freezing-thawing cycles. Climate extremes totally change biogeochemical processes and elements cycling both at the ecosystem level and at the level of soil profile mainly affecting soil biota. Misbalance in these processes can cause a reduction of soil carbon stock and an increase of greenhouse gases emission. Our project aims to reveal the transformation mechanisms of soil organic matter caused by extreme weather events taking into consideration the role of biotic-abiotic interactions in regulation of formation, maintenance and turnover of soil carbon stock. Our research strategy is based on the novel concept considering extreme climatic events (showers after long-term droughts, soil flooding, freezing-thawing) as abiotic factors initiating a microbial succession. Study on stoichiometric flexibility of plants under climate extremes as well as on resulting response of soil heterotrophs on stoichiometric changes in substrate will be used for experimental prove and further development of the theory of ecological stoichiometry. The results enable us to reveal the mechanisms of biotic - abiotic interactions responsible for the balance between mobilization and stabilization of soil organic matter. Identified mechanisms will form the basis of an ecosystem model enabled to predict the effects of extreme climatic events on biogenic carbon cycle in the biosphere.

Projection of SO2, NOx, NMVOC, particulate matter and black carbon emissions - 2015-2030

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Hjelgaard, Katja Hossy

This report contains a description of models and background data for projection of SO2, NOX, NMVOC, PM2.5 and black carbon for Denmark. The emissions are projected to 2030 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts...

Projection of SO{sub 2}, NO{sub X}, NMVOC, NH{sub 3} and particle emissions - 2005 to 2030

Energy Technology Data Exchange (ETDEWEB)

Boll Illerup, J; Nielsen, Ole-Kenneth; Winther, M; Hjorth Mikkelsen, M; Nielsen, Malene; Fauser, P; Gyldenkaerne, S

2008-05-15

This report contains a description of models and background data for projection of SO{sub 2}, NO{sub X}, NH{sub 3}, NMVOC, TSP, PM{sub 10} and PM{sub 2.5} for Denmark. The emissions are projected to 2030 using basic scenarios together with the expected results of a few individual policy measures. Official Danish forecasts of activity rates are used in the models for those sectors for which the forecasts are available, i.e. the latest official forecast from the Danish Energy Authority. The emission factors refer to international guidelines and some are country-specific and refer to Danish legislation, Danish research reports or calculations based on emission data from a considerable number of plants. The projection models are based on the same structure and method as the Danish emission inventories in order to ensure consistency. (au)

How Does Transformational Leadership Promote Innovation in Construction? The Mediating Role of Innovation Climate and the Multilevel Moderation Role of Project Requirements

Directory of Open Access Journals (Sweden)

Yanchun Zhang

2018-05-01

Full Text Available Innovation plays a critical role in the sustainable development of the construction industry. This research aims at examining transformational leadership’s role in shaping employees’ innovative behavior by analyzing the mediating effect of innovation climate and the cross-level moderating effect of innovativeness as a project requirement. To achieve this aim, a questionnaire survey was conducted with 300 construction industry professionals in China and 251 valid replies were received. Data collected by the questionnaire were analyzed using the method of hierarchical linear modeling (HLM. The results showed that transformational leaders could nurture a mutual climate for innovation to motivate employees’ innovative behaviors. In addition, innovativeness as a project requirement at the project level strengthens the indirect link amongst transformational leadership and innovative behavior via the innovation climate. Therefore, in the presence of higher innovativeness as a project requirement, transformational leadership is more prone to exert a positive influence upon an individual’s innovative behavior via the perceived innovation climate. The research findings improve understanding of the roles of leadership and innovation climate in affecting individual behavioral outcomes, and could help project managers and leaders encourage innovative ideas within project organizations.

Emission projections 2008-2012 versus national allocation plans II

International Nuclear Information System (INIS)

Neuhoff, Karsten; Ferrario, Federico; Grubb, Michael; Gabel, Etienne; Keats, Kim

2006-01-01

We compare the national allocation plans (NAPs), proposed and submitted by EU Member States as of October 2006, with our estimations for CO 2 emissions by the installations covered by these NAPs. The collective allocations proposed under phase II NAPs exceed the historic trend of emissions extrapolated forward. Using our projections we find, depending on uncertainty in fuel prices, economic growth rates, performance of the non-power sector and CDM/JI availability, a 15% chance of a 'dead market' with emissions below cap even at zero prices. With an expected inflow of committed CDM/JI credits of 100 MtCO 2 /year, allowance supply will exceed demand in 50% of cases without any carbon price, and in 80% of our euros20/tCO 2 scenarios. Banking of allowances towards post-2012 conditions could create additional demand, but this is difficult to anticipate and conditional on policy evolution. The proposed phase II NAPs would result in low prices and only small volumes of CDM/JI would enter the EU ETS. CDM/JI would almost exclusively be public-sector funded, placing the cost of Kyoto compliance entirely upon governments. (Author)

Restoring in-phase emissions from non-planar radiating elements using a transformation optics based lens

International Nuclear Information System (INIS)

Yi, Jianjia; Burokur, Shah Nawaz; Lustrac, André de; Piau, Gérard-Pascal

2015-01-01

The broadband directive in-phase emission from an array of sources conformed cylindrically is numerically and experimentally reported. Such manipulation is achieved through the use of a lens designed by transformation optics concept. The all-dielectric lens prototype is realized through three-dimensional (3D) polyjet printing and presents a graded refractive index. A microstrip antenna array fabricated using standard lithography techniques and conformed on a cylindrical surface is used as TE-polarized wave launcher for the lens. To experimentally demonstrate the broadband focusing properties and in-phase directive emissions, both the far-field radiation patterns and the near-field distributions have been measured. Experimental measurements agreeing qualitatively with numerical simulations validate the proposed lens and open the way to inexpensive all-dielectric microwave lenses for beam forming and collimation

Restoring in-phase emissions from non-planar radiating elements using a transformation optics based lens

Energy Technology Data Exchange (ETDEWEB)

Yi, Jianjia [IEF, CNRS, UMR 8622, Université Paris-Sud, 91405 Orsay Cedex (France); Burokur, Shah Nawaz, E-mail: shah-nawaz.burokur@u-psud.fr; Lustrac, André de [IEF, CNRS, UMR 8622, Université Paris-Sud, 91405 Orsay Cedex (France); Université Paris-Ouest, 92410 Ville d' Avray (France); Piau, Gérard-Pascal [AIRBUS Group Innovations, 92150 Suresnes (France)

2015-07-13

The broadband directive in-phase emission from an array of sources conformed cylindrically is numerically and experimentally reported. Such manipulation is achieved through the use of a lens designed by transformation optics concept. The all-dielectric lens prototype is realized through three-dimensional (3D) polyjet printing and presents a graded refractive index. A microstrip antenna array fabricated using standard lithography techniques and conformed on a cylindrical surface is used as TE-polarized wave launcher for the lens. To experimentally demonstrate the broadband focusing properties and in-phase directive emissions, both the far-field radiation patterns and the near-field distributions have been measured. Experimental measurements agreeing qualitatively with numerical simulations validate the proposed lens and open the way to inexpensive all-dielectric microwave lenses for beam forming and collimation.

Transformation of organic matter and the emissions of methane and ammonia during storage of liquid manure as affected by acidification

DEFF Research Database (Denmark)

Sommer, Sven G.; Clough, Timothy J.; Balaine, Nimlesh

2017-01-01

), suggesting that DOC may be a predictor for CH4 emission from dilute slurries. volatile fatty acid and total ammoniacal nitrogen concentrations in surface layers were substantially higher than at the center of stored liquid manure, perhaps resulting from microbial activity at the surface. This pattern......Acidification of livestock manure can reduce emission of the greenhouse gases methane (CH4) and nitrous oxide (N2O), as well as ammonia (NH3). We examined the relation between emission of these gases and transformation of organic matter as affected by acidification. Liquid cattle manure......, probably due to the absence of a surface crust. Reductions in NH3 and CH4 emission were highest at the start but declined over time concomitantly with a gradual increase in the stored liquid manure pH. Acidification did not significantly affect CO2 emissions. Emission of CO2 was high, fiveto ten-fold of CH...

Quantitative assessment of industrial VOC emissions in China: Historical trend, spatial distribution, uncertainties, and projection

Science.gov (United States)

Zheng, Chenghang; Shen, Jiali; Zhang, Yongxin; Huang, Weiwei; Zhu, Xinbo; Wu, Xuecheng; Chen, Linghong; Gao, Xiang; Cen, Kefa

2017-02-01

The temporal trends of industrial volatile organic compound (VOC) emissions was comprehensively summarized for the 2011 to 2013 period, and the projections for 2020 to 2050 for China were set. The results demonstrate that industrial VOC emissions in China increased from 15.3 Tg in 2011 to 29.4 Tg in 2013 at an annual average growth rate of 38.3%. Guangdong (3.45 Tg), Shandong (2.85 Tg), and Jiangsu (2.62 Tg) were the three largest contributors collectively accounting for 30.4% of the national total emissions in 2013. The top three average industrial VOC emissions per square kilometer were Shanghai (247.2 ton/km2), Tianjin (62.8 ton/km2), and Beijing (38.4 ton/km2), which were 12-80 times of the average level in China. The data from the inventory indicate that the use of VOC-containing products, as well as the production and use of VOCs as raw materials, as well as for storage and transportation contributed 75.4%, 10.3%, 9.1%, and 5.2% of the total emissions, respectively. ArcGIS was used to display the remarkable spatial distribution variation by allocating the emission into 1 km × 1 km grid cells with a population as surrogate indexes. Combined with future economic development and population change, as well as implementation of policy and upgrade of control technologies, three scenarios (scenarios A, B, and C) were set to project industrial VOC emissions for the years 2020, 2030, and 2050, which present the industrial VOC emissions in different scenarios and the potential of reducing emissions. Finally, the result shows that the collaborative control policies considerably influenced industrial VOC emissions.

Projection of the gases emissions of greenhouse effect (GEI), Colombia 1998-2010

International Nuclear Information System (INIS)

Gonzalez B, Fabio; Rodriguez M, Humberto

1999-01-01

The Greenhouse Gas Emissions baseline scenario 1998-2010 was developed from the energy and no-energy sector projections. This study considered the same greenhouse gases as the 1990 inventory. One of the major findings is the increase in the participation share of the energy sector from 31% in 1990 up to 72% in 2010, while the non-energy sector decrease its share from 69% to 28% in the same period the total emissions increase from 167 mt/year in 1990 to 174 mt/year in 2010, an increase of only 4%

Baseline options and greenhouse gas emission reduction of clean development mechanism project in urban solid waste management

Energy Technology Data Exchange (ETDEWEB)

Hiramatsu, Ai; Hanaki, K. [Department of Urban Engineering, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Aramaki, T. [Research Center for Advanced Science and Technology, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904(Japan)

2003-07-01

The Clean Development Mechanism (CDM) was adopted in the Kyoto Protocol as a flexibility mechanism to reduce greenhouse gases (GHGs) and has been started with such projects as improving efficiency of individual technology. Although applying various countermeasures to urban areas has significant potentials for reducing GHGs, these countermeasures have not been proposed as CDM projects in the practical stage. A CDM project needs to be validated that it will reduce GHGs additionally compared with a baseline, that is, a predictive value of GHG emissions in the absence of the project. This study examined the introduction of solid waste incineration with electricity generation into three different cities, A, B and C. The main solid waste treatment and the main fuel source are landfill and coal, respectively, in City A, incineration and natural gas in City B, and landfill and hydro in City C. GHG emission reductions of each city under several baseline options assumed here were evaluated. Even if the same technology is introduced, the emission reduction greatly varies according to the current condition and the future plan of the city: 1043-1406 kg CO2/t of waste in City A, 198-580 kg CO2/t in City B, and wide range of zero to over 1000 kg CO2/t in City C. Baseline options also cause significant difference in the emission reduction even in the same city (City C). Incinerating solid waste after removing plastics by source separation in City B increased GHG emission reduction potential up to 730-900 kg CO2/t, which enhances the effectiveness as a CDM project.

Acoustic recognition of stress induced martensitic transformations in Cu-based shape memory alloys

Czech Academy of Sciences Publication Activity Database

Novák, Václav; Landa, Michal; Šittner, Petr

2003-01-01

Roč. 112, - (2003), s. 593-596 ISSN 1155-4339 R&D Projects: GA AV ČR IAA1048107; GA ČR GA106/01/0396 Institutional research plan: CEZ:AV0Z1010914 Keywords : shape memory alloys(SMA) * Cu-based SMA * Martensitic phase transformation * acoustic emission Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.319, year: 2003

Acoustic emission during R-phase and martensitic transformations in a Ti50.2Ni48.3Fe1.5 alloy

International Nuclear Information System (INIS)

Takashima, K.; Nishida, M.

1995-01-01

Acoustic emission (AE) signals generated during phase transformations in a Ti 50.2 Ni 48.3 Fe 1.5 shape memory alloy have been measured, and the AE parameters have been correlated with the phase transformation events. The AE count rate curve during cooling of the specimen was found to have two distinct peaks at temperatures of approximately 8 and -30 C. These peaks were confirmed by both optical microscopy and differential scanning calorimetry to correspond to the B2 to R phase transformation (at 8 C) and the R to B19' transformation (at -30 C) respectively. This is the first detection of the AE events associated with the R-phase transformation in Ti-Ni shape memory alloys. Although the amplitude distributions during both transformations were almost identical, both the duration and the rise time of AE events during the B2 to R phase transformation were larger than those during the R to B19' transformation. These observations suggest that the transformation velocity of the R-phase transformation is slower than that of the martensitic transformation, and are consistent with the nature of both these transformations. It is concluded that the AE technique can be applied to the determination of transformation temperatures of Ti-Ni alloys on cooling as well as DSC and electrical resistivity measurement. (orig.)

Effluent monitoring Quality Assurance Project Plan for radioactive airborne emissions data. Revision 2

International Nuclear Information System (INIS)

Frazier, T.P.

1995-12-01

This Quality Assurance Project Plan addresses the quality assurance requirements for compiling Hanford Site radioactive airborne emissions data. These data will be reported to the U.S. Environmental Protection Agency, the US Department of Energy, and the Washington State Department of Health. Effluent Monitoring performs compliance assessments on radioactive airborne sampling and monitoring systems. This Quality Assurance Project Plan is prepared in compliance with interim guidelines and specifications. Topics include: project description; project organization and management; quality assurance objectives; sampling procedures; sample custody; calibration procedures; analytical procedures; monitoring and reporting criteria; data reduction, verification, and reporting; internal quality control; performance and system audits; corrective actions; and quality assurance reports

Methane emission from ruminants and solid waste: A critical analysis of baseline and mitigation projections for climate and policy studies

Science.gov (United States)

Matthews, E.

2012-12-01

Current and projected estimates of methane (CH4) emission from anthropogenic sources are numerous but largely unexamined or compared. Presented here is a critical appraisal of CH4 projections used in climate-chemistry and policy studies. We compare emissions for major CH4 sources from several groups, including our own new data and RCP projections developed for climate-chemistry models for the next IPCC Assessment Report (AR5). We focus on current and projected baseline and mitigation emissions from ruminant animals and solid waste that are both predicted to rise dramatically in coming decades, driven primarily by developing countries. For waste, drivers include increasing urban populations, higher per capita waste generation due to economic growth and increasing landfilling rates. Analysis of a new global data base detailing waste composition, collection and disposal indicates that IPCC-based methodologies and default data overestimate CH4 emission for the current period which cascades into substantial overestimates in future projections. CH4 emission from solid waste is estimated to be ~10-15 Tg CH4/yr currently rather than the ~35 Tg/yr often reported in the literature. Moreover, emissions from developing countries are unlikely to rise rapidly in coming decades because new management approaches, such as sanitary landfills, that would increase emissions are maladapted to infrastructures in these countries and therefore unlikely to be implemented. The low current emission associated with solid waste (~10 Tg), together with future modest growth, implies that mitigation of waste-related CH4 emission is a poor candidate for slowing global warming. In the case of ruminant animals (~90 Tg CH4/yr currently), the dominant assumption driving future trajectories of CH4 emission is a substantial increase in meat and dairy consumption in developing countries to be satisfied by growing animal populations. Unlike solid waste, current ruminant emissions among studies exhibit a

Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

Energy Technology Data Exchange (ETDEWEB)

Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

2015-04-30

The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

Projections of highway vehicle population, energy demand, and CO{sub 2} emissions in India through 2040.

Energy Technology Data Exchange (ETDEWEB)

Arora, S.; Vyas, A.; Johnson, L.; Energy Systems

2011-02-22

This paper presents projections of motor vehicles, oil demand, and carbon dioxide (CO{sub 2}) emissions for India through the year 2040. The populations of highway vehicles and two-wheelers are projected under three different scenarios on the basis of economic growth and average household size in India. The results show that by 2040, the number of highway vehicles in India would be 206-309 million. The oil demand projections for the Indian transportation sector are based on a set of nine scenarios arising out of three vehicle-growth and three fuel-economy scenarios. The combined effects of vehicle-growth and fuel-economy scenarios, together with the change in annual vehicle usage, result in a projected demand in 2040 by the transportation sector in India of 404-719 million metric tons (8.5-15.1 million barrels per day). The corresponding annual CO{sub 2} emissions are projected to be 1.2-2.2 billion metric tons.

Particle reduction strategies - PAREST. Gridded European emission data for projection years 2010, 2015 and 2020 based on the IIASA GAINS NEC scenarios. Teilbericht

Energy Technology Data Exchange (ETDEWEB)

Gon, Hugo Denier van der; Visschedijk, Antoon; Brugh, Hans van den [TNO Earth, Environment and Life Sciences, Utrecht (Netherlands)

2013-06-15

Projected emissions for selected scenarios for the years 2010, 2015 and 2020 were obtained from the GAINS NEC scenario reports and distributed on a high resolution over Europe using the TNO gridding tools. These emission maps are available as model input in the PAREST project to model the contribution of Europe to air quality in Germany in 2010, 2015 and 2020 (see note Rainer Stern, May 2009). The scenarios have a significant influence on absolute emission levels for the countries that were covered by IIASA GAINS. This suggests that emission changes in countries were no scenarios were available (Armenia, Azerbaijan, Georgia) or where only a projection year baseline is available (all non-EU) may be subject to significant changes as well (but these are quite far from Germany). For future projects it is recommended to make simple and transparent scenarios for these other countries, as well as for International Shipping. The change in emissions from the base year 2005 to the projection year 2010 needs to be interpreted with care. This because some methodology differences between 2005 official emission data as used in the PAREST base year 2005 emission set and GAINS 2010 data exist. It is expected that the emission reduction steps towards 2020 are more realistic.

Leadership Development of Rehabilitation Professionals in a Low-Resource Country: A Transformational Leadership, Project-Based Model.

Science.gov (United States)

Pascal, Maureen Romanow; Mann, Monika; Dunleavy, Kim; Chevan, Julia; Kirenga, Liliane; Nuhu, Assuman

2017-01-01

This paper presents an overview of the activities and outcomes of the Leadership Institute (LI), a short-term leadership development professional development course offered to physiotherapists in a low-resource country. Previous studies have provided examples of the benefits of such programs in medicine and nursing, but this has yet to be documented in the rehabilitation literature. The prototype of leadership development presented may provide guidance for similar trainings in other low-resource countries and offer the rehabilitation community an opportunity to build on the model to construct a research agenda around rehabilitation leadership development. The course used a constructivist approach to integrate participants' experiences, background, beliefs, and prior knowledge into the content. Transformational leadership development theory was emphasized with the generation of active learning projects, a key component of the training. Positive changes after the course included an increase in the number of community outreach activities completed by participants and increased involvement with their professional organization. Thirteen leadership projects were proposed and presented. The LI provided present and future leaders throughout Rwanda with exposure to transformative leadership concepts and offered them the opportunity to work together on projects that enhanced their profession and met the needs of underserved communities. Challenges included limited funding for physiotherapy positions allocated to hospitals in Rwanda, particularly in the rural areas. Participants experienced difficulties in carrying out leadership projects without additional funding to support them. While the emphasis on group projects to foster local advocacy and community education is highly recommended, the projects would benefit from a strong long-term mentorship program and further budgeting considerations. The LI can serve as a model to develop leadership skills and spur professional

Uncertainty in greenhouse-gas emission scenario projections: Experiences from Mexico and South Africa

DEFF Research Database (Denmark)

Puig, Daniel

This report outlines approaches to quantify the uncertainty associated with national greenhouse-gas emission scenario projections. It does so by describing practical applications of those approaches in two countries – Mexico and South Africa. The goal of the report is to promote uncertainty...

Uncertainties in the Dutch Reference Projections. Background information for the report 'Reference Projections Energy and Emissions 2005-2020'

International Nuclear Information System (INIS)

Seebregts, A.J.; Gijsen, A.

2005-09-01

The Dutch targets for greenhouse gases, ammonia and non-methane VOCs will likely be met in 2010 according to our calculations from an uncertainty analysis in the framework of the project on Reference Projections for energy, climate and acidifying emissions. However, it is unlikely that the targets for sulphur dioxide and nitrogen oxide will be attained This study distinguished between sources of uncertainty in the input variables of the Reference Projections. These sources were quantified with the help of the 'Guidance for Uncertainty Assessment and Communication' and 'expert judgement'. With the aid of a statistical Monte Carlo analysis, margins and probability distributions were determined for the most important outcomes of the Reference Projections. These probability distributions led, for example, to several statements being made on the chances of meeting certain targets. The use of 'Guidance for Uncertainty Assessment and Communication' was also evaluated [nl

Nahm transformation for parabolic Higgs bundles on the projective line --- case of non-semisimple residues

OpenAIRE

Szabo, Szilard

2016-01-01

We extend our earlier construction of Nahm transformation for parabolic Higgs bundles on the projective line to solutions with not necessarily semisimple residues and show that it determines a holomorphic mapping on corresponding moduli spaces. The construction relies on suitable elementary modifications of the logarithmic Dolbeault complex.

Nahm transformation for parabolic Higgs bundles on the projective line-Case of non-semisimple residues

Science.gov (United States)

Szabó, Szilárd

2017-12-01

We extend our earlier construction of Nahm transformation for parabolic Higgs bundles on the projective line to solutions with not necessarily semisimple residues and show that it determines a holomorphic mapping on corresponding moduli spaces. The construction relies on suitable elementary modifications of the logarithmic Dolbeault complex.

Microbial transformation of coal and coal relevant structures - presentation of a BMBF joint research project

Energy Technology Data Exchange (ETDEWEB)

Sinder, C.; Schacht, S.; Pfeifer, F.; Klein, J. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

1997-12-31

Investigations in the joint research project `Microbial transformation of coal and coal relevant structures` supported by the Ministry of Education, Science, Research and Technology (BMBF) of the Federal Republic of Germany and coordinated by the DMT-Gesellschaft fuer Forschung und Pruefung mbH (DMT) are focussed on research and development of biotechnological coal conversion processes. Up to now investigations carried out in the project lead to a number of important results. During work on the project a great number of different microorganisms was found able to degrade or solubilize coal or lignite. Enzymatic as well as regulation mechanisms of the microbial depolymerization processes have been characterized successfully. (orig.)

Projection of energy use and greenhouse gas emissions by motor vehicles in China: Policy options and impacts

International Nuclear Information System (INIS)

Huo Hong; Wang, Michael; Zhang Xiliang; He Kebin; Gong Huiming; Jiang Kejun; Jin Yuefu; Shi Yaodong; Yu Xin

2012-01-01

We project the well-to-wheels (WTW) and tank-to-wheels (TTW) fossil-energy use, petroleum use, and greenhouse gas (GHG) emissions of the road-transport sector in China up to year 2050 and evaluate the effects of various potential policy options with the fuel economy and environmental impacts (FEEI) model ( (http://www.feeimodel.org/)). The policies evaluated include (1) vehicle fuel-consumption improvements, (2) dieselization, (3) vehicle electrification, and (4) fuel diversification, with plausible policy scenarios. Under the business-as-usual scenario, road transport in China would create 410–520 million metric tons (MMT) of oil-equivalent of TTW oil demand (three to four times the current level), 28–36 billion GJ of WTW energy demand, and 1900–2300 MMT of CO 2 -equivalent of WTW GHG emissions by 2050. The policies (in the same order as above) are projected to reduce the TTW oil demand by 35%, 10%, 29%, and 44%, and reduce WTW GHG emissions by 34%, 5%, 12%, and 13%, respectively, by 2050. This evaluation reveals that the fuel-consumption improvement policy could achieve greater benefit in reducing oil use, fossil-energy use, and GHG emissions. Implications of each policy option are discussed and the uncertainties associated with the policy scenarios are analyzed. - Highlights: ► Fuel-cycle energy use and GHG emissions of vehicles in China are projected up to 2050. ► Various policies are evaluated with the fuel economy and environmental impacts model. ► Fuel economy standards have greatest benefit in saving energy use and GHG emissions. ► Electrification is effective. Benefit of dieselization and fuel blending is limited.

Powering Africa - Projected costs and emissions

Science.gov (United States)

Pappis, Ioannis; Taliotis, Constantinos; Howells, Mark; Lindblad, Nicolina

2017-04-01

Energy is a fundamental driver of economic growth. Several Sub-Saharan African countries are amongst the least developing economies in the world. A large proportion of the population in the region also lacks access to electricity and other modern energy services, while the individuals who have access are faced with frequent outages. This paper presents scenarios in which universal electricity access across the African continent is achieved by 2030 at a range of electricity consumption levels. A cost-optimization model is used to identify the least-cost generation mix in each country individually so as to meet the projected demand. Several generation options are allowed in each nation, while cross-border electricity trade is enabled at existing and future planned levels, so as to allow exploitation of untapped energy resources in remote regions of the continent. The results indicate that with a higher electricity consumption, CO2 emissions in generation increase considerably. This is due to coal rising as one of the dominant fuels in the supply of centralized electricity, and is of particular importance in climate change negotiations.

Projection of Chinese motor vehicle growth, oil demand, and CO2 emissions through 2050

Science.gov (United States)

2007-01-01

During this study a methodology was developed to project growth trends of the motor vehicle population and associated oil demand and carbon dioxide (CO2) emissions in China through 2050. In particular, the numbers of highway vehicles, motorcycles, an...

Integrated Environmental Assessment Modelling. Estimates of Emission and Measurement of Impacts. Final Report of the Spanish Subproject EU/Life Project

International Nuclear Information System (INIS)

Guardans, R.; Gimeno, B.S.; Bermejo, V.; Elvira, S.; Martin, F.; Palacios, M.; Rodriguez, E.; Donaire, I.

2000-01-01

This report describes the results of the Spanish participation in the project Coupling CORINAIR data to cost-effective emission reduction strategies based on critical thresholds. (EU/LIFE97/ENV/ FIN/336). The sub project has focused on three tasks: Develop tools to improve knowledge on the spatial and temporal details of emissions of air pollutants in Spain, Exploit existing experimental information on plant response to air pollutants in temperate ecosystems and Integrate these findings in a modelling framework that can asses with more accuracy the impact of air pollutants to temperate ecosystems. The results obtained during the execution of this project have significantly improved the models of the impact of alterative emission control strategies on ecosystems and crops in the Iberian Peninsula. (Author) 375 refs

Beyond the Numbers: Understanding the Transformation Induced by INDCs

International Nuclear Information System (INIS)

Spencer, Thomas; Pierfederici, Roberta; Waisman, Henri; Colombier, Michel; Bertram, Christoph; Kriegler, Elmar; Luderer, Gunnar; Humpenoeder, Florian; Popp, Alexander; Edenhofer, Ottmar; Den Elzen, Michel; Van Vuuren, Detlef; Van Soest, Heleen; Paroussos, Leonidas; Fragkos, Panagiotis; Kainuma, Mikiko; Masui, Toshihiko; Oshiro, Ken; Akimoto, Keigo; Shoai Tehrani, Bianka; Sano, Fuminori; Oda, Junichiro; Clarke, Leon; Iyer, Gokul; Edmonds, Jae; TENG, Fei; FU, Sha; Kejun, Jiang; Koeberle, Alexandre C.; Szklo, Alexandre; Lucena, Andre F.P.; Portugal-Pereira, Joana; Rochedo, Pedro; Schaeffer, Roberto; Awasthy, Aayushi; Kumar Shrivastava, Manish; Mathur, Ritu; Rogelj, Joeri; Jewell, Jessica; Riahi, Keywan; Garg, Amit

2015-10-01

The present analysis of the contributions (INDCs) submitted by Member States to the United Nations Framework Convention on Climate Change (UNFCCC) in the run-up to COP21 was conducted by leading research teams from Brazil, China, Japan, India, the United States and the European Union within the MILES Project (funded by the European Commission). By investigating the concrete implications of INDCs for the low-carbon transformation by and beyond 2030, from energy systems, buildings to transport and industry, this study complements the upcoming cutting-edge assessments by UNFCCC and UNEP of the impact of INDCs on global emissions and the global temperature goal. The 'Modelling and Informing Low-Emission Strategies' (MILES) project is an international research project bringing together 16 leading research teams in order to build capacity and knowledge on low-emissions development strategies. The objective of this report is to understand the implications of INDCs of the 5 countries and 1 region covered by the project (US, China, Japan, EU, Brazil and India), both at a national and global level, by investigating the concrete implications of INDCs for the low-carbon transformation by and beyond 2030, from energy systems, buildings to transport and industry. A significant transition appears in the electricity sector, where INDCs will further drive the transition towards renewables and other low-emissions forms of electricity production. In the six major economies assessed individually, carbon dioxide emissions per unit of electricity production falls by about 40% between 2010 and 2030 and renewable electricity becomes the dominant source of electricity production at about 36% of the electricity mix. Some crucial low-carbon solutions, like CCS, electric vehicles, advanced biofuels, sustainable urban planning, appear unlikely to be developed under the INDCs at the scale and speed required for a 2 deg. C scenario. Likewise, the report highlights that INDCs would leave too much

Implementing wavelet packet transform for valve failure detection using vibration and acoustic emission signals

International Nuclear Information System (INIS)

Sim, H Y; Ramli, R; Abdullah, M A K

2012-01-01

The efficiency of reciprocating compressors relies heavily on the health condition of its moving components, most importantly its valves. Previous studies showed good correlation between the dynamic response and the physical condition of the valves. These can be achieved by employing vibration technique which is capable of monitoring the response of the valve, and acoustic emission technique which is capable of detecting the valves' material deformation. However, the relationship/comparison between the two techniques is rarely investigated. In this paper, the two techniques were examined using time-frequency analysis. Wavelet packet transform (WPT) was chosen as the multi-resolution analysis technique over continuous wavelet transform (CWT), and discrete wavelet transform (DWT). This is because WPT could overcome the high computational time and high redundancy problem in CWT and could provide detailed analysis of the high frequency components compared to DWT. The features of both signals can be extracted by evaluating the normalised WPT coefficients for different time window under different valve conditions. By comparing the normalised coefficients over a certain time frame and frequency range, the feature vectors revealing the condition of valves can be constructed. One way analysis of variance was employed on these feature vectors to test the significance of data under different valve conditions. It is believed that AE signals can give a better representation of the valve condition as it can detect both the fluid motion and material deformation of valves as compared to the vibration signals.

REDD+ projects in the Democratic Republic of Congo: impacts on future emissions, income and biodiversity

Science.gov (United States)

Mosnier, Aline; Bocqueho, Geraldine; Mant, Rebecca; Obersteiner, Michael; Havlik, Petr; Kapos, Val; Fritz, Steffen; Botrill, Leo

2014-05-01

The Democratic Republic of Congo (DRC) encompasses a large rainforest area which has been rather preserved up to now. However, pressure on the forests is increasing with high population growth, transition toward political stability and the abundance of minerals in the country. REDD+ is a developing mechanism under the UNFCCC that aims to support developing countries that want to make efforts to reduce their emissions from deforestation and forest degradation. The REDD+ strategy in DRC combines an independent national fund and independent REDD+ projects at the local level that are at the initial stage of implementation. The objective of this paper is to assess i) emissions reduction due to the implementation of the REDD+ pilot projects taking into account potential leakage and ii) potential co-benefits of REDD+ pilot projects in terms of biodiversity and rural income by 2030. We use the land use economic model CongoBIOM adapted from GLOBIOM which represents land-based activities and land use changes at a 50x50km resolution level. It includes domestic and international demand for agricultural products, fuel wood and minerals which are the main deforestation drivers in the Congo Basin region. Finally, we run a sensitivity analysis on emissions from land use change according to three different above and below ground living biomass estimates: downscaled FAO, NASA and WHRC.

Polynomial Similarity Transformation Theory: A smooth interpolation between coupled cluster doubles and projected BCS applied to the reduced BCS Hamiltonian

Energy Technology Data Exchange (ETDEWEB)

Degroote, M. [Rice Univ., Houston, TX (United States); Henderson, T. M. [Rice Univ., Houston, TX (United States); Zhao, J. [Rice Univ., Houston, TX (United States); Dukelsky, J. [Consejo Superior de Investigaciones Cientificas (CSIC), Madrid (Spain). Inst. de Estructura de la Materia; Scuseria, G. E. [Rice Univ., Houston, TX (United States)

2018-01-03

We present a similarity transformation theory based on a polynomial form of a particle-hole pair excitation operator. In the weakly correlated limit, this polynomial becomes an exponential, leading to coupled cluster doubles. In the opposite strongly correlated limit, the polynomial becomes an extended Bessel expansion and yields the projected BCS wavefunction. In between, we interpolate using a single parameter. The e ective Hamiltonian is non-hermitian and this Polynomial Similarity Transformation Theory follows the philosophy of traditional coupled cluster, left projecting the transformed Hamiltonian onto subspaces of the Hilbert space in which the wave function variance is forced to be zero. Similarly, the interpolation parameter is obtained through minimizing the next residual in the projective hierarchy. We rationalize and demonstrate how and why coupled cluster doubles is ill suited to the strongly correlated limit whereas the Bessel expansion remains well behaved. The model provides accurate wave functions with energy errors that in its best variant are smaller than 1% across all interaction stengths. The numerical cost is polynomial in system size and the theory can be straightforwardly applied to any realistic Hamiltonian.

Image reconstruction from projections and its application in emission computer tomography

International Nuclear Information System (INIS)

Kuba, Attila; Csernay, Laszlo

1989-01-01

Computer tomography is an imaging technique for producing cross sectional images by reconstruction from projections. Its two main branches are called transmission and emission computer tomography, TCT and ECT, resp. After an overview of the theory and practice of TCT and ECT, the first Hungarian ECT type MB 9300 SPECT consisting of a gamma camera and Ketronic Medax N computer is described, and its applications to radiological patient observations are discussed briefly. (R.P.) 28 refs.; 4 figs

The URban Greenhouse gas Emissions assessment through inverse modeling (URGE) project: a pilot study in the Oslo area

Science.gov (United States)

Pisso, I. J.; Lopez-Aparicio, S.; Schneider, P.; Schmidbauer, N.; Vogt, M.

2017-12-01

Norway has set the target of cutting greenhouse gas (GHG) emissions by at least 40% compared to 1990 levels by 2030. This goal will require the implementation of policy measures aiming at strong reductions of GHGs emissions, especially in the urban environment. The implementation of urban policy measures is still a challenging task and it requires control and verification for success. The URGE project aims at assessing the emission flux of GHGs including comprehensive uncertainty estimates based on inverse transport modelling techniques and optimized use of measurements. The final goal is to establish a coherent and consistent GHG urban emission inventory. This will be carried out in a case study in Oslo (Norway), where CO2 will be the priority compound. The overall outcome of the project will provide support in the development of strategies to effectively reduce GHG emissions in the urban environment. The overall goal will be reached through establishing the baseline urban CO2 emission inventory for Oslo; determining the optimal measurement locations based on transport modelling (with flexpart-wrf); designing and carrying out a pilot measurement campaign of the CO2-rich air downwind of the city plume combining state-of-the-art instruments (Picarro) and small sensors; assessing the feasibility of determining the background concentration surrounding the city with satellite measurements (OCO2); and providing optimised estimates of the emissions and their uncertainties via inverse modelling (source-receptor relationship). One of our main interests is the interoperability and exchange of information with similar activities in other urban areas. We will present the overall project and the preliminary results of the network design. We will discuss the data exchange formats, the algorithms and data structures that could be used for results and methodology intercomparisons as well as the suitability to apply the same techniques to other atmospheric compounds.

An Overview of the MILAGRO 2006 Campaign: Mexico City Emissions and their Transport and Transformation

Energy Technology Data Exchange (ETDEWEB)

Molina, Luisa T.; Madronich, Sasha; Gaffney, Jeffrey; Apel, Eric; de Foy, B.; Fast, Jerome D.; Ferrare, R.; Herndon, Scott C.; Jimenez, Jose L.; Lamb, Brian K.; Orsonio-Vargas, A. R.; Russell, P. B.; Schauer, James J.; Stevens, P. S.; Volkamer, Rainer M.; Zavala, Miguel A.

2010-03-25

The world’s population is projected to increase 33% during the next three decades, to 8.1 billion. Nearly all of the projected growth is expected to be concentrated in urban centers. These rapidly expanding urban regions and surrounding suburban areas are leading to the phenomenon of megacities (metropolitan areas with populations exceeding 10 million inhabitants). Well governed, densely populated settlements can reduce the need for land conversion and provide proximity to infrastructure and services. However, many urban areas experience uncontrolled sprawl and their activities are the leading cause of environmental problems. These mega-centers of human population are tied directly to increasing demands for energy and associated industrial activities and motorization that lead to more emission of pollutants into the atmosphere. Air pollution is one of the most important environmental challenges of this century. This challenge is particularly acute in the developing world where the rapid growth of megacities is producing atmospheric pollution of unprecedented severity and extent. MILAGRO (Megacity Initiative: Local And Global Research Observations) is the first international collaborative project to examine the behavior and the export of atmospheric pollutants generated in megacities. The Mexico City Metropolitan Area (MCMA) - one of the world’s largest megacities and North America’s most populous city -- was selected as the initial case study to characterize the sources and processes of emissions from the urban center and to evaluate the regional and global impacts of the Mexico City air pollution plume

3D craniofacial registration using thin-plate spline transform and cylindrical surface projection.

Science.gov (United States)

Chen, Yucong; Zhao, Junli; Deng, Qingqiong; Duan, Fuqing

2017-01-01

Craniofacial registration is used to establish the point-to-point correspondence in a unified coordinate system among human craniofacial models. It is the foundation of craniofacial reconstruction and other craniofacial statistical analysis research. In this paper, a non-rigid 3D craniofacial registration method using thin-plate spline transform and cylindrical surface projection is proposed. First, the gradient descent optimization is utilized to improve a cylindrical surface fitting (CSF) for the reference craniofacial model. Second, the thin-plate spline transform (TPST) is applied to deform a target craniofacial model to the reference model. Finally, the cylindrical surface projection (CSP) is used to derive the point correspondence between the reference and deformed target models. To accelerate the procedure, the iterative closest point ICP algorithm is used to obtain a rough correspondence, which can provide a possible intersection area of the CSP. Finally, the inverse TPST is used to map the obtained corresponding points from the deformed target craniofacial model to the original model, and it can be realized directly by the correspondence between the original target model and the deformed target model. Three types of registration, namely, reflexive, involutive and transitive registration, are carried out to verify the effectiveness of the proposed craniofacial registration algorithm. Comparison with the methods in the literature shows that the proposed method is more accurate.

3D craniofacial registration using thin-plate spline transform and cylindrical surface projection.

Directory of Open Access Journals (Sweden)

Yucong Chen

Full Text Available Craniofacial registration is used to establish the point-to-point correspondence in a unified coordinate system among human craniofacial models. It is the foundation of craniofacial reconstruction and other craniofacial statistical analysis research. In this paper, a non-rigid 3D craniofacial registration method using thin-plate spline transform and cylindrical surface projection is proposed. First, the gradient descent optimization is utilized to improve a cylindrical surface fitting (CSF for the reference craniofacial model. Second, the thin-plate spline transform (TPST is applied to deform a target craniofacial model to the reference model. Finally, the cylindrical surface projection (CSP is used to derive the point correspondence between the reference and deformed target models. To accelerate the procedure, the iterative closest point ICP algorithm is used to obtain a rough correspondence, which can provide a possible intersection area of the CSP. Finally, the inverse TPST is used to map the obtained corresponding points from the deformed target craniofacial model to the original model, and it can be realized directly by the correspondence between the original target model and the deformed target model. Three types of registration, namely, reflexive, involutive and transitive registration, are carried out to verify the effectiveness of the proposed craniofacial registration algorithm. Comparison with the methods in the literature shows that the proposed method is more accurate.

Contour-Based Corner Detection and Classification by Using Mean Projection Transform

Directory of Open Access Journals (Sweden)

Seyed Mostafa Mousavi Kahaki

2014-02-01

Full Text Available Image corner detection is a fundamental task in computer vision. Many applications require reliable detectors to accurately detect corner points, commonly achieved by using image contour information. The curvature definition is sensitive to local variation and edge aliasing, and available smoothing methods are not sufficient to address these problems properly. Hence, we propose Mean Projection Transform (MPT as a corner classifier and parabolic fit approximation to form a robust detector. The first step is to extract corner candidates using MPT based on the integral properties of the local contours in both the horizontal and vertical directions. Then, an approximation of the parabolic fit is calculated to localize the candidate corner points. The proposed method presents fewer false-positive (FP and false-negative (FN points compared with recent standard corner detection techniques, especially in comparison with curvature scale space (CSS methods. Moreover, a new evaluation metric, called accuracy of repeatability (AR, is introduced. AR combines repeatability and the localization error (Le for finding the probability of correct detection in the target image. The output results exhibit better repeatability, localization, and AR for the detected points compared with the criteria in original and transformed images.

Development of Toroidal Core Transformers

Energy Technology Data Exchange (ETDEWEB)

de Leon, Francisco [New York Univ. (NYU), Brooklyn, NY (United States). Dept. of Electrical and Computer Engineering

2014-08-01

The original objective of this project was to design, build and test a few prototypes of single-phase dry-type distribution transformers of 25 kVA, 2.4 kV primary to 120 V transformers using cores made of a continuous steel strip shaped like a doughnut (toroid). At different points during the development of the project, the scope was enhanced to include the more practical case of a 25 kVA transformer for a 13.8 kV primary system voltage. Later, the scope was further expanded to design and build a 50 kVA unit to transformer voltage from 7.62 kV to 2x120 V. This is a common transformer used by Con Edison of New York and they are willing to test it in the field. The project officially started in September 2009 and ended in May 2014. The progress was reported periodically to DOE in eighteen quarterly reports. A Continuation Application was submitted to DOE in June 2010. In May 2011 we have requested a non-cost extension of the project. In December 2011, the Statement of Project Objectives (SOPO) was updated to reflect the real conditions and situation of the project as of 2011. A second Continuation Application was made and funding was approved in 2013 by DOE and the end date was extended to May 2014. The technical challenges that were overcome in this project include: the development of the technology to pass the impulse tests, derive a model for the thermal performance, produce a sound mechanical design, and estimate the inrush current. However, the greatest challenge that we faced during the development of the project was the complications of procuring the necessary parts and materials to build the transformers. The actual manufacturing process is relatively fast, but getting all parts together is a very lengthy process. The main products of this project are two prototypes of toroidal distribution transformers of 7.62 kV (to be used in a 13.8 kV system) to 2x120 V secondary (standard utilization voltage); one is rated at 25 kVA and the other at 50 kVA. The 25 k

Mercury transformation and speciation in flue gases from anthropogenic emission sources: a critical review

Science.gov (United States)

Zhang, Lei; Wang, Shuxiao; Wu, Qingru; Wang, Fengyang; Lin, Che-Jen; Zhang, Leiming; Hui, Mulin; Yang, Mei; Su, Haitao; Hao, Jiming

2016-02-01

Mercury transformation mechanisms and speciation profiles are reviewed for mercury formed in and released from flue gases of coal-fired boilers, non-ferrous metal smelters, cement plants, iron and steel plants, waste incinerators, biomass burning and so on. Mercury in coal, ores, and other raw materials is released to flue gases in the form of Hg0 during combustion or smelting in boilers, kilns or furnaces. Decreasing temperature from over 800 °C to below 300 °C in flue gases leaving boilers, kilns or furnaces promotes homogeneous and heterogeneous oxidation of Hg0 to gaseous divalent mercury (Hg2+), with a portion of Hg2+ adsorbed onto fly ash to form particulate-bound mercury (Hgp). Halogen is the primary oxidizer for Hg0 in flue gases, and active components (e.g., TiO2, Fe2O3, etc.) on fly ash promote heterogeneous oxidation and adsorption processes. In addition to mercury removal, mercury transformation also occurs when passing through air pollution control devices (APCDs), affecting the mercury speciation in flue gases. In coal-fired power plants, selective catalytic reduction (SCR) system promotes mercury oxidation by 34-85 %, electrostatic precipitator (ESP) and fabric filter (FF) remove over 99 % of Hgp, and wet flue gas desulfurization system (WFGD) captures 60-95 % of Hg2+. In non-ferrous metal smelters, most Hg0 is converted to Hg2+ and removed in acid plants (APs). For cement clinker production, mercury cycling and operational conditions promote heterogeneous mercury oxidation and adsorption. The mercury speciation profiles in flue gases emitted to the atmosphere are determined by transformation mechanisms and mercury removal efficiencies by various APCDs. For all the sectors reviewed in this study, Hgp accounts for less than 5 % in flue gases. In China, mercury emission has a higher Hg0 fraction (66-82 % of total mercury) in flue gases from coal combustion, in contrast to a greater Hg2+ fraction (29-90 %) from non-ferrous metal smelting, cement and

Uncertain socioeconomic projections used in travel demand and emissions models: could plausible errors result in air quality nonconformity?

International Nuclear Information System (INIS)

Rodier, C.J.; Johnston, R.A.

2002-01-01

A sensitivity analysis of plausible errors in population, employment, fuel price, and income projections is conducted using the travel demand and emissions models of the Sacramento, CA, USA, region for their transportation plan. The results of the analyses indicate that plausible error ranges for household income and fuel prices are not a significant source of uncertainty with respect to the region's travel demand and emissions projections. However, plausible errors in population and employment projections (within approximately one standard deviation) may result in the region's transportation plan not meeting the conformity test for nitrogens of oxides (NO x ) in the year 2005 (i.e., an approximately 16% probability). This outcome is also possible in the year 2015 but less likely (within approximately two standard deviations or a 2.5% probability). Errors in socioeconomic projections are only one of many sources of error in travel demand and emissions models. These results have several policy implications. First, regions like Sacramento that meet their conformity tests by a very small margin should rethink new highway investment and consider contingency transportation plans that incorporate more aggressive emissions reduction policies. Second, regional transportation planning agencies should conduct sensitivity analyses as part of their conformity analysis to make explicit significant uncertainties in the methods and to identify the probability of their transportation plan not conforming. Third, the US Environmental Protection Agency (EPA) should clarify the interpretation of ''demonstrate'' conformity of transportation plans; that is, specify the level of certainty that it considers a sufficient demonstration of conformity. (author)

Making of Croatian Low-Emission Development Strategy

International Nuclear Information System (INIS)

Bartle, B.; Herencic, L.; Kordic, Z.; Pasicko, R.; Vlasic, S.

2012-01-01

A Low-Emission Development Strategy (LEDS) is a national, high-level, comprehensive, long-term strategy, developed by domestic stakeholders, which aims at decoupling economic growth and social development from greenhouse gas (GHG) emissions growth. Croatia has begun to join the growing list of countries in the world that have already developed a long-term strategy for low-emissions development and thereby take the road of sustainable development. The 16th Conference of the Parties'' (COP), held in Cancun in December 2010, adopted the Cancun Agreements - a historic set of decisions laying the foundation to tackle climate change through a new post-2012 regime. The Cancun Agreements ''encourages governments to prepare low-carbon development strategies in the context of sustainable development.'' and ''realizes that addressing climate change requires a paradigm shift towards building a low-carbon society that offers substantial opportunities and ensures continued high growth and sustainable development''. Recently the European Commission adopted a Roadmap for transforming the European Union into a competitive low carbon economy by 2050. The Roadmap describes the cost-effective pathway to reach the EU's objective of cutting greenhouse gas emissions by 80-95% of 1990 levels by 2050. On the domestic level, the LEDS is a country-driven policy instrument for national decision making. The LEDS supports sector transformation through a national, economy-wide approach. On the international level, LEDS support the global goal of GHG emission reduction. The Croatian Ministry of Environmental and Nature Protection in cooperation with United Nations Development Programme (UNDP) Croatia will design and implement the Low-Emissions Development Strategy (LEDS) under project titled ''Supporting RBEC countries transition to low-emission development''. The LEDS merges climate change action with national sustainable development and helps to identify and prioritize nationally appropriate

Investment appraisal of heat and power plants within an emissions trading scheme. Final Report of the INVIS Project

International Nuclear Information System (INIS)

Laurikka, H.; Pirilae, P.

2005-04-01

The opportunity cost for carbon dioxide (CO 2 ) emissions has become a new factor influencing investments in heat and power production capacity globally, and in particular in countries with a greenhouse gas emissions trading system, such as the European Union Emissions Trading Scheme (EU ETS). There is a considerable power capacity investment need in the coming decades in Finland, in Europe and globally. As the economic lifetime of an investment in heat and power capacity typically ranges from 20-40 years, 'carbon finance' and the EU ETS therefore introduce a considerable and fundamental price risk to the investment problem. In Europe, the price risk is present in all investments and divestments of power production licences or capacity, be it a green-field plant, a retrofit of an existing plant or an acquisition. The objective of the INVIS research project was to extend the knowledge on strategic implications of emissions trading in investments into heat and power generation. This report gives an overview on the main findings of the project. The focus of INVIS project was on (1) quantitative investment appraisal and (2) methods rather than tools or parameter values. Particular attention in the INVIS project was paid to the incorporation of emissions trading in new methods of investment appraisal, which aim at taking into account the value of real options, rights to postpone or revise decisions. The EU ETS modifies the quantitative investment appraisal of heat and power plants directly through the emission allowance price and the number of free allowances and indirectly through impacts on output prices, input prices, taxation, and subsidies. From the risk perspective, the most problematic impact seems to be the regulatory uncertainty in the number of free allowances, which can turn out to be a barrier for investment in fossil-fuel-fired thermal power plants - even combined-cycle gas turbines. The emission allowance price is a stochastic variable, which implies it is

Physical reasons of emission transformation in infrared CdSeTe/ZnS quantum dots at bioconjugation

Science.gov (United States)

Torchynska, T. V.

2015-04-01

The core/shell CdSeTe/ZnS quantum dots (QDs) with emission at 780-800 nm (1.55-1.60 eV) have been studied by means of photoluminescence (PL) and Raman scattering methods in the nonconjugated state and after conjugation to different antibodies (Ab): (i) mouse monoclonal [8C9] human papilloma virus Ab, anti-HPV 16-E7 Ab, (ii) mouse monoclonal [C1P5] human papilloma virus HPV16 E6+HPV18 E6 Ab, and (iii) pseudo rabies virus (PRV) Ab. The transformations of PL and Raman scattering spectra of QDs, stimulated by conjugated antibodies, have been revealed and discussed. The energy band diagram of core/shell CdSeTe/ZnS QDs has been designed that helps to analyze the PL spectra and their transformations at the bioconjugation. It is shown that the core in CdSeTe/ZnS QDs is complex and including the type II quantum well. The last fact permits to explain the nature of infrared (IR) optical transitions (1.55-1.60 eV) and the high energy PL band (1.88-1.94 eV) in the nonconjugated and bioconjugated QDs. A set of physical reasons has been analyzed with the aim to explain the transformation of PL spectra in bioconjugated QDs. Finally it is shown that two factors are responsible for the PL spectrum transformation at bioconjugation to charged antibodies: (i) the change of energy band profile in QDs and (ii) the shift of QD energy levels in the strong quantum confinement case. The effect of PL spectrum transformation is useful for the study of QD bioconjugation to specific antibodies and can be a powerful technique for early medical diagnostics.

The implications of the historical decline in US energy intensity for long-run CO2 emission projections

International Nuclear Information System (INIS)

Sue Wing, Ian; Eckaus, Richard S.

2007-01-01

This paper analyzes the influence of the long-run decline in US energy intensity on projections of energy use and carbon emissions to the year 2050. We build on our own recent work which decomposes changes in the aggregate US energy-GDP ratio into shifts in sectoral composition (structural change) and adjustments in the energy demand of individual industries (intensity change), and identifies the impact on the latter of price-induced substitution of variable inputs, shifts in the composition of capital and embodied and disembodied technical progress. We employ a recursive-dynamic computable general equilibrium (CGE) model of the US economy to analyze the implications of these findings for future energy use and carbon emissions. Comparison of the simulation results against projections of historical trends in GDP, energy use and emissions reveals that the range of values for the rate of autonomous energy efficiency improvement (AEEI) conventionally used in CGE models is consistent with the effects of structural changes at the sub-sector level, rather than disembodied technological change. Even so, our results suggest that US emissions may well grow faster in the future than in the recent past

Comparing projections of industrial energy demand and greenhouse gas emissions in long-term energy models

NARCIS (Netherlands)

Edelenbosch, O. Y.|info:eu-repo/dai/nl/412493373; Kermeli, K.|info:eu-repo/dai/nl/411260553; Crijns-Graus, W.|info:eu-repo/dai/nl/308005015; Worrell, E.|info:eu-repo/dai/nl/106856715; Bibas, R.; Fais, B.; Fujimori, S.; Kyle, P.; Sano, F.; van Vuuren, Detlef|info:eu-repo/dai/nl/11522016X

2017-01-01

The industry sector is a major energy consumer and GHG emitter. Effective climate change mitigation strategies will require a significant reduction of industrial emissions. To better understand the variations in the projected industrial pathways for both baseline and mitigation scenarios, we compare

Students enabling students in a Student Partnership Project: A case study emerging from the OLT Transforming Practice Project on Student Partnerships

Directory of Open Access Journals (Sweden)

Megan Kek

2017-07-01

Full Text Available This emerging initiative stemmed from an Office for Learning and Teaching Project (OLT project, Transforming Practice Programme 2016: Student Engagement: Students as Partners in Teaching and Learning. The initiative, trialed in semester two, 2016, involved the selection and training of two experienced students to be leaders of a Closed Facebook ‘students-only’ community which provided advice and triaged queries to appropriate channels. The evaluative processes comprised a participatory action research methodology. Two student leaders who facilitated the Closed Facebook and four academic staff of the project were the participants. The findings demonstrate that the Closed Facebook students-only site provided a safe space, outside the formal learning/classroom environment, where student participants were able to ask and share knowledge. The informal student-for-student learning community complemented the formal structure by facilitating the opportunity for students to become ‘experts’ as university students as they move-through their learning journey.

Energy balance in the transformation centers

International Nuclear Information System (INIS)

Alvim, Carlos Feu; Ferreira, Omar Campos; Eidelman, Frida.

2005-01-01

Carbon balance is an important instrument to identify the emission sources of greenhouse effect gases. Since energy use and transformation are fundamental for increasing these gases in the atmosphere, the carbon balance survey can be used to identify sectors and fuels to which priority should be given regarding emissions mitigation. In the case of transformation centers (installations where primary or secondary sources are converted into sub-products or other energy form) the balance indicated some problems regarding the Brazilian inventory calculation. Problems concerning the National Energy Balance data used here were also identified. (author)

Projection of Chinese motor vehicle growth, oil demand, and CO{sub 2}emissions through 2050.

Energy Technology Data Exchange (ETDEWEB)

Wang, M.; Huo, H.; Johnson, L.; He, D.

2006-12-20

As the vehicle population in China increases, oil consumption and carbon dioxide (CO{sub 2}) emissions associated with on-road transportation are rising dramatically. During this study, we developed a methodology to project trends in the growth of the vehicle population, oil demand, and CO{sub 2} emissions associated with on-road transportation in China. By using this methodology, we projected--separately--the number of highway vehicles, motorcycles, and rural vehicles in China through 2050. We used three scenarios of highway vehicle growth (high-, mid-, and low-growth) to reflect patterns of motor vehicle growth that have occurred in different parts of the world (i.e., Europe and Asia). All are essentially business-as-usual scenarios in that almost none of the countries we examined has made concerted efforts to manage vehicle growth or to offer serious alternative transportation means to satisfy people's mobility needs. With this caveat, our projections showed that by 2030, China could have more highway vehicles than the United States has today, and by 2035, it could have the largest number of highway vehicles in the world. By 2050, China could have 486-662 million highway vehicles, 44 million motorcycles, and 28 million rural vehicles. These numbers, which assume essentially unmanaged vehicle growth, would result in potentially disastrous effects on the urban infrastructure, resources, and other social and ecological aspects of life in China. We designed three fuel economy scenarios, from conservative to aggressive, on the basis of current policy efforts and expectations of near-future policies in China and in developed countries. It should be noted that these current and near-future policies have not taken into consideration the significant potential for further fuel economy improvements offered by advanced technologies such as electric drive technologies (e.g., hybrid electric vehicles and fuel-cell vehicles). By using vehicle growth projections and

A study on the impact of parameter uncertainty on the emission-based ranking of transportation projects.

Science.gov (United States)

2014-01-01

With the growing concern with air quality levels and, hence, the livability of urban regions in the nation, it has become increasingly common to incorporate vehicular emission considerations in the ranking of transportation projects. Network assignme...

Aircraft Emission Inventories Projected in Year 2015 for a High Speed Civil Transport (HSCT) Universal Airline Network. Final report

Energy Technology Data Exchange (ETDEWEB)

Baughcum, S.L.; Henderson, S.C.

1995-07-01

This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from projected fleets of high speed civil transports (HSCT`s) on a universal airline network. Inventories for 500 and 1000 HSCT fleets, as well as the concurrent subsonic fleets, were calculated. The objective of this work was to evaluate the changes in geographical distribution of the HSCT emissions as the fleet size grew from 500 to 1000 HSCT`s. For this work, a new expanded HSCT network was used and flights projected using a market penetration analysis rather than assuming equal penetration as was done in the earlier studies. Emission inventories on this network were calculated for both Mach 2.0 and Mach 2.4 HSCT fleets with NOx cruise emission indices of approximately 5 and 15 grams NOx/kg fuel. These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as NO2), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer attitude grid and delivered to NASA as electronic files.

Projected changes of rainfall seasonality and dry spells in a high greenhouse gas emissions scenario

OpenAIRE

Pascale, Salvatore; Lucarini, Valerio; Feng, Xue; Porporato, Amilcare; ul Hasson, Shabeh

2016-01-01

In this diagnostic study we analyze changes of rainfall seasonality and dry spells by the end of the twenty-first century under the most extreme IPCC5 emission scenario (RCP8.5) as projected by twenty-four coupled climate models contributing to Coupled Model Intercomparison Project 5 (CMIP5). We use estimates of the centroid of the monthly rainfall distribution as an index of the rainfall timing and a threshold-independent, information theory-based quantity such as relative entropy (RE) to qu...

Projections of NH3 emissions from manure generated by livestock production in China to 2030 under six mitigation scenarios.

Science.gov (United States)

Xu, Peng; Koloutsou-Vakakis, Sotiria; Rood, Mark J; Luan, Shengji

2017-12-31

China's rapid urbanization, large population, and increasing consumption of calorie-and meat-intensive diets, have resulted in China becoming the world's largest source of ammonia (NH 3 ) emissions from livestock production. This is the first study to use provincial, condition-specific emission factors based on most recently available studies on Chinese manure management and environmental conditions. The estimated NH 3 emission temporal trends and spatial patterns are interpreted in relation to government policies affecting livestock production. Scenario analysis is used to project emissions and estimate mitigation potential of NH 3 emissions, to year 2030. We produce a 1km×1km gridded NH 3 emission inventory for 2008 based on county-level activity data, which can help identify locations of highest NH 3 emissions. The total NH 3 emissions from manure generated by livestock production in 2008 were 7.3TgNH 3 ·yr -1 (interquartile range from 6.1 to 8.6TgNH 3 ·yr -1 ), and the major sources were poultry (29.9%), pigs (28.4%), other cattle (27.9%), and dairy cattle (7.0%), while sheep and goats (3.6%), donkeys (1.3%), horses (1.2%), and mules (0.7%) had smaller contributions. From 1978 to 2008, annual NH 3 emissions fluctuated with two peaks (1996 and 2006), and total emissions increased from 2.2 to 7.3Tg·yr -1 increasing on average 4.4%·yr -1 . Under a business-as-usual (BAU) scenario, NH 3 emissions in 2030 are expected to be 13.9TgNH 3 ·yr -1 (11.5-16.3TgNH 3 ·yr -1 ). Under mitigation scenarios, the projected emissions could be reduced by 18.9-37.3% compared to 2030 BAU emissions. This study improves our understanding of NH 3 emissions from livestock production, which is needed to guide stakeholders and policymakers to make well informed mitigation decisions for NH 3 emissions from livestock production at the country and regional levels. Copyright © 2017 Elsevier B.V. All rights reserved.

Planning level assessment of greenhouse gas emissions for alternative transportation construction projects : carbon footprint estimator, phase II, volume I - GASCAP model.

Science.gov (United States)

2014-03-01

The GASCAP model was developed to provide a software tool for analysis of the life-cycle GHG : emissions associated with the construction and maintenance of transportation projects. This phase : of development included techniques for estimating emiss...

Estimating emissions on vehicular traffic based on projected energy and transport demand on rural roads: Policies for reducing air pollutant emissions and energy consumption

International Nuclear Information System (INIS)

Ozan, Cenk; Haldenbilen, Soner; Ceylan, Halim

2011-01-01

This study deals with the estimation of emissions caused by vehicular traffic based on transport demand and energy consumption. Projected transport demand is calculated with Genetic Algorithm (GA) using population, gross domestic product per capita (GDPPC) and the number of vehicles. The energy consumption is modelled with the GA using the veh-km. The model age of the vehicles and their corresponding share for each year using the reference years is obtained. The pollutant emissions are calculated with estimated transport and energy demand. All the calculations are made in line to meet the European standards. For this purpose, two cases are composed. Case 1: Emissions based on energy consumption, and Case 2: Emissions based on transport demand. The both cases are compared. Three policies are proposed to control demand and the emissions. The policies provided the best results in terms of minimum emissions and the reasonable share of highway and railway mode as 70% and 30% usage for policy I, respectively. The emission calculation procedure presented in this study would provide an alternative way to make policies when there is no adequate data on emission measurement in developing countries. - Research highlights: → Emissions caused by vehicular traffic are modelled. → The pollutant emissions are calculated with estimated transport and energy demand. → All the calculations are made in line with to meet the European standards. → The calculation procedure will provide an alternative way to make policies. → The procedure will help planners to convince politicians to impose policies.

Responding to climate change and the global land crisis: REDD+, market transformation and low-emissions rural development.

Science.gov (United States)

Nepstad, Daniel C; Boyd, William; Stickler, Claudia M; Bezerra, Tathiana; Azevedo, Andrea A

2013-06-05

Climate change and rapidly escalating global demand for food, fuel, fibre and feed present seemingly contradictory challenges to humanity. Can greenhouse gas (GHG) emissions from land-use, more than one-fourth of the global total, decline as growth in land-based production accelerates? This review examines the status of two major international initiatives that are designed to address different aspects of this challenge. REDD+ is an emerging policy framework for providing incentives to tropical nations and states that reduce their GHG emissions from deforestation and forest degradation. Market transformation, best represented by agricultural commodity roundtables, seeks to exclude unsustainable farmers from commodity markets through international social and environmental standards for farmers and processors. These global initiatives could potentially become synergistically integrated through (i) a shared approach for measuring and favouring high environmental and social performance of land use across entire jurisdictions and (ii) stronger links with the domestic policies, finance and laws in the jurisdictions where agricultural expansion is moving into forests. To achieve scale, the principles of REDD+ and sustainable farming systems must be embedded in domestic low-emission rural development models capable of garnering support across multiple constituencies. We illustrate this potential with the case of Mato Grosso State in the Brazilian Amazon.

Determination of current and rotational transform profiles in a current-carrying stellarator using soft x-ray emissivity measurements

Science.gov (United States)

Ma, X.; Cianciosa, M. R.; Ennis, D. A.; Hanson, J. D.; Hartwell, G. J.; Herfindal, J. L.; Howell, E. C.; Knowlton, S. F.; Maurer, D. A.; Traverso, P. J.

2018-01-01

Collimated soft X-ray (SXR) emissivity measurements from multi-channel cameras on the Compact Toroidal Hybrid (CTH) tokamak/torsatron device are incorporated in the 3D equilibrium reconstruction code V3FIT to reconstruct the shape of flux surfaces and infer the current distribution within the plasma. Equilibrium reconstructions of sawtoothing plasmas that use data from both SXR and external magnetic diagnostics show the central safety factor to be near unity under the assumption that SXR iso-emissivity contours lie on magnetic flux surfaces. The reconstruction results are consistent with those using the external magnetic data and a constraint on the location of q = 1 surfaces determined from the sawtooth inversion surface extracted from SXR brightness profiles. The agreement justifies the use of approximating SXR emission as a flux function in CTH, at least within the core of the plasma, subject to the spatial resolution of the SXR diagnostics. This improved reconstruction of the central current density indicates that the current profile peakedness decreases with increasing external transform and that the internal inductance is not a relevant measure of how peaked the current profile is in hybrid discharges.

Quantized Bogoliubov transformations

International Nuclear Information System (INIS)

Geyer, H.B.

1984-01-01

The boson mapping of single fermion operators in a situation dominated by the pairing force gives rise to a transformation that can be considered a quantized version of the Bogoliubov transformation. This transformation can also be obtained as an exact special case of operators constructed from an approximate treatment of particle number projection, suggesting a method of obtaining the boson mapping in cases more complicated than that of pairing force domination

A multilevel study of the impact of project manager's leadership on extra-role performance of project team members

Science.gov (United States)

Shokory, Suzyanty Mohd; Suradi, Nur Riza Mohd

2018-04-01

The current study examines the impact of transformational and transactional leadership of project manager on the extra-role performance of project team members. In addition, this study also identifies factor dominant to extra-role performance of project team members when the transformational and transactional leadership of project managers are analyzed simultaneously. The study involved 175 of project team members from 35 project teams (each project team consists of different contracting companies registered in the Selangor (N = 175 from 35 contractors company). A multilevel analysis with hierarchical linear modeling (HLM) approach was used in this study. The analysis showed that transformational and transactional leadership of the project manager is a positive significant with extra-role performance project team members when analyzed separately. However when the two constructs (transformational leadership and transactional leadership of project manager) were analyzed simultaneously, transformational leadership was found to have more impact on extra-role performance project team members compared to transactional leadership. These findings explained that although transformational and transactional leadership of project managers can improve extra-role performance project team members, but this study has proved that transformational leadership of project managers affect extra-role performance project team members more as compared to transactional leadership.

Measurement of surface temperature and emissivity by a multitemperature method for Fourier-transform infrared spectrometers

DEFF Research Database (Denmark)

Clausen, Sønnik; Morgenstjerne, Axel; Rathmann, Ole

1996-01-01

Surface temperatures are estimated with high precision based on a multitemperature method for Fourier-transform spectrometers. The method is based on Planck's radiation law and a nonlinear least-squares fitting algorithm applied to two or more spectra at different sample temperatures and a single...... of blackbody sources are estimated with an uncertainty of 0.2-2 K. The method is demonstrated for measuring the spectral emissivity of a brass specimen and an oxidized nickel specimen. (C) 1996 Optical Society of America...... measurement at a known sample temperature, for example, at ambient temperature. The temperature of the sample surface can be measured rather easily at ambient temperature. The spectrum at ambient temperature is used to eliminate background effects from spectra as measured at other surface temperatures...

NF ISO 14064-2. Greenhouse gases. Part 2: specifications and guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

International Nuclear Information System (INIS)

2005-01-01

This document describes methodology for quantification, monitoring and reporting of activities intended to cause greenhouse gas emissions and reductions at projects level (activity modifying the conditions identified in a baseline scenario, intended to reduce emissions or to increase the removal of greenhouse gases). Thus it suggests a method for the declarations of inventory of projects greenhouse gases and provides support for the monitoring and the management of emissions. It provides terms and definitions, principles, the introduction to greenhouse gases projects and the requirements for greenhouse gas projects. (A.L.B.)

COMPARISON OF THREE METHODS TO PROJECT FUTURE BASELINE CARBON EMISSIONS IN TEMPERATE RAINFOREST, CURINANCO, CHILE

Energy Technology Data Exchange (ETDEWEB)

Patrick Gonzalez; Antonio Lara; Jorge Gayoso; Eduardo Neira; Patricio Romero; Leonardo Sotomayor

2005-07-14

Deforestation of temperate rainforests in Chile has decreased the provision of ecosystem services, including watershed protection, biodiversity conservation, and carbon sequestration. Forest conservation can restore those ecosystem services. Greenhouse gas policies that offer financing for the carbon emissions avoided by preventing deforestation require a projection of future baseline carbon emissions for an area if no forest conservation occurs. For a proposed 570 km{sup 2} conservation area in temperate rainforest around the rural community of Curinanco, Chile, we compared three methods to project future baseline carbon emissions: extrapolation from Landsat observations, Geomod, and Forest Restoration Carbon Analysis (FRCA). Analyses of forest inventory and Landsat remote sensing data show 1986-1999 net deforestation of 1900 ha in the analysis area, proceeding at a rate of 0.0003 y{sup -1}. The gross rate of loss of closed natural forest was 0.042 y{sup -1}. In the period 1986-1999, closed natural forest decreased from 20,000 ha to 11,000 ha, with timber companies clearing natural forest to establish plantations of non-native species. Analyses of previous field measurements of species-specific forest biomass, tree allometry, and the carbon content of vegetation show that the dominant native forest type, broadleaf evergreen (bosque siempreverde), contains 370 {+-} 170 t ha{sup -1} carbon, compared to the carbon density of non-native Pinus radiata plantations of 240 {+-} 60 t ha{sup -1}. The 1986-1999 conversion of closed broadleaf evergreen forest to open broadleaf evergreen forest, Pinus radiata plantations, shrublands, grasslands, urban areas, and bare ground decreased the carbon density from 370 {+-} 170 t ha{sup -1} carbon to an average of 100 t ha{sup -1} (maximum 160 t ha{sup -1}, minimum 50 t ha{sup -1}). Consequently, the conversion released 1.1 million t carbon. These analyses of forest inventory and Landsat remote sensing data provided the data to

Nitrous oxide emissions affected by biochar and nitrogen stabilizers

Science.gov (United States)

Both biochar and N fertilizer stabilizers (N transformation inhibitors) are potential strategies to reduce nitrous oxide (N2O) emissions from fertilization, but the mechanisms and/or N transformation processes affecting the N dynamics are not fully understood. This research investigated N2O emission...

Using Travel Diary Data to Estimate the Emissions Impacts of Transportation Strategies: The Puget Sound Telecommuting Demonstration Project

OpenAIRE

Henderson, Dennis K.; Koenig, Brett E.; Mokhtarian, Patricia L.

1996-01-01

Transportation control measures are often implemented for their environmental benefits, but there is a need to quantify what benefits actually occur. Telecommuting has the potential to reduce the number of daily trips and miles traveled with personal vehicles and, consequently, the overall emissions resulting from vehicle activity. This search studies the emissions impacts of telecommuting for the participants of the Puget Sound Telecommuting Demonstration Project (PSTDP). The California Air ...

Scattered Radiation Emission Imaging: Principles and Applications

Directory of Open Access Journals (Sweden)

M. K. Nguyen

2011-01-01

Full Text Available Imaging processes built on the Compton scattering effect have been under continuing investigation since it was first suggested in the 50s. However, despite many innovative contributions, there are still formidable theoretical and technical challenges to overcome. In this paper, we review the state-of-the-art principles of the so-called scattered radiation emission imaging. Basically, it consists of using the cleverly collected scattered radiation from a radiating object to reconstruct its inner structure. Image formation is based on the mathematical concept of compounded conical projection. It entails a Radon transform defined on circular cone surfaces in order to express the scattered radiation flux density on a detecting pixel. We discuss in particular invertible cases of such conical Radon transforms which form a mathematical basis for image reconstruction methods. Numerical simulations performed in two and three space dimensions speak in favor of the viability of this imaging principle and its potential applications in various fields.

A projection of energy consumption and carbon dioxide emissions in the electricity sector for Saudi Arabia: The case for carbon capture and storage and solar photovoltaics

International Nuclear Information System (INIS)

Mansouri, Noura Y.; Crookes, Roy J.; Korakianitis, Theodosios

2013-01-01

The paper examined the case study of the Saudi electricity sector and provided projections for energy use and respective carbon dioxide (CO 2 ) emissions for the period 2010–2025 with and without cleaner energy technologies. Based on two sets of 20 life cycle assessment studies for carbon capture and storage and solar photovoltaic technologies, CO 2 emission reduction rates were used for projecting future CO 2 emissions. Results showed enormous savings in CO 2 emissions, for the most likely case, year 2025 reported savings that range from 136 up to 235 MtCO 2 . Including low growth and high growth cases, these savings could range from 115 up to 468 MtCO 2 presenting such an unrivalled opportunity for Saudi Arabia. These projections were developed as a way of translating the inherent advantages that cleaner energy technologies could provide for CO 2 emissions savings. It is hoped that the results of this paper would inform energy policymaking in Saudi Arabia. - Highlights: • Electricity use in Saudi Arabia is predicted in the period 2010–2025. • Use of photovoltaic plants and carbon capture and storage are considered. • Life cycle assessment of the options is conducted. • Carbon emissions with and without the renewable energy are estimated. • The projections showcase the CO 2 emissions savings

The effect of updated pledges and business-as-usual projections, and new agreed rules on expected global greenhouse gas emissions in 2020

International Nuclear Information System (INIS)

Hof, Andries F.; Elzen, Michel G.J. den; Roelfsema, Mark

2013-01-01

Highlights: • This study compares 2020 emission levels from pledges to those consistent with 2 °C. • For a likely chance of 2 °C, we find an emission gap of 8.7–12.6 GtCO 2 equiv. by 2020. • The pledges could achieve 24–54% of the mitigation effort consistent with 2 °C. • The effect of accounting rules is lower than in the UNEP (2012) emission gap report. • An emission gap does not imply that the 2 °C target is definitely out of reach. -- Abstract: The Copenhagen Accord of 2009 refers to a 2 °C target and encouraged countries to submit emission reduction proposals and actions (pledges) for the year 2020, which many did. Several studies determined the effect of these pledges on the global emission level in 2020, and analysed the gap between this emission level and the level consistent with least-cost emission pathways for achieving the 2 °C target. These studies were summarised in the UNEP emission gap reports. Since the UNFCCC climate negotiations in Cancún, 2010, business-as-usual emission projections have been updated and some countries submitted new pledges or clarified existing pledges. Furthermore, new accounting rules for land use and the use of surplus units were agreed in Durban (2011) and Doha (2012). This paper shows that together, these developments have led to an increase in the emission level resulting from the pledges of about 4 GtCO 2 equiv. compared to our assessment before Cancún, mainly due to increased business-as-usual projections. According to our projections, the pledges lead to an emission level of 52.7–56.5 GtCO 2 equiv. by 2020, which implies an emission gap of 8.7–12.6 GtCO 2 equiv. for a likely chance (greater than 66% likelihood) and from 6.7 to 10.6 GtCO 2 equiv. for a medium chance (50–66% likelihood) of achieving 2 °C. This does not imply that achieving 2 °C is out of reach with the current pledges, but it will require higher reduction rates beyond 2020 and will depend more heavily on future technological

Lean Transformation of Multinational Concerns

DEFF Research Database (Denmark)

Matthiesen, Rikke Vestergaard; Johansen, John

2008-01-01

triggered. This paper reports on exploratory studies from a multinational company adopting centrally managed pilot projects as a transformation mechanism for continuous change towards a lean business system and an organizational culture of continuous improvements (CI). Competitive pressure demands...... from a multinational company adopting centrally managed pilot projects as a transformation mechanism for continuous change towards a lean business system and an organizational culture of continuous improvements (CI)....

Projection Models 2010

DEFF Research Database (Denmark)

Illerup, J. B.; Birr-Pedersen, K.; Mikkelsen, M. H

Models for projection of SO2-, NOx-, NMVOC- and NH3-emissions to the atmosphere have been developed and the Danish emissions have been projected until 2010 from a basis scenario including all implemented and planned measures. The projections of the four pollutants indicate that it may be difficult...

Bearing Fault Detection Based on Empirical Wavelet Transform and Correlated Kurtosis by Acoustic Emission.

Science.gov (United States)

Gao, Zheyu; Lin, Jing; Wang, Xiufeng; Xu, Xiaoqiang

2017-05-24

Rolling bearings are widely used in rotating equipment. Detection of bearing faults is of great importance to guarantee safe operation of mechanical systems. Acoustic emission (AE), as one of the bearing monitoring technologies, is sensitive to weak signals and performs well in detecting incipient faults. Therefore, AE is widely used in monitoring the operating status of rolling bearing. This paper utilizes Empirical Wavelet Transform (EWT) to decompose AE signals into mono-components adaptively followed by calculation of the correlated kurtosis (CK) at certain time intervals of these components. By comparing these CK values, the resonant frequency of the rolling bearing can be determined. Then the fault characteristic frequencies are found by spectrum envelope. Both simulation signal and rolling bearing AE signals are used to verify the effectiveness of the proposed method. The results show that the new method performs well in identifying bearing fault frequency under strong background noise.

Analytical inversion formula for uniformly attenuated fan-beam projections

International Nuclear Information System (INIS)

Weng, Y.; Zeng, G.L.; Gullberg, G.T.

1997-01-01

In deriving algorithms to reconstruct single photon emission computed tomography (SPECT) projection data, it is important that the algorithm compensates for photon attenuation in order to obtain quantitative reconstruction results. A convolution backprojection algorithm was derived by Tretiak and Metz to reconstruct two-dimensional (2-D) transaxial slices from uniformly attenuated parallel-beam projections. Using transformation of coordinates, this algorithm can be modified to obtain a formulation useful to reconstruct uniformly attenuated fan-beam projections. Unlike that for parallel-beam projections, this formulation does not produce a filtered backprojection reconstruction algorithm but instead has a formulation that is an inverse integral operator with a spatially varying kernel. This algorithm thus requires more computation time than does the filtered backprojection reconstruction algorithm for the uniformly attenuated parallel-beam case. However, the fan-beam reconstructions demonstrate the same image quality as that of parallel-beam reconstructions

Transformation of technical infrastructure

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

, the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop......The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure...

Magnetic and spontaneous Barkhausen noise techniques used in investigation of a martensitic transformation

Science.gov (United States)

Capò Sànchez, J.; Huallpa, E.; Farina, P.; Padovese, L. R.; Goldenstein, H.

2011-10-01

Magnetic Barkhausen noise (MBN) was used to characterize the progress of austenite to martensite phase transformation while cooling steel specimens, using a conventional Barkhausen noise emission setup stimulated by an alternating magnetic field. The phase transformation was also followed by electrical resistivity measurements and by optical and scanning electron microscopy. MBN measurements on a AISI D2 tool steel austenitized at 1473 K and cooled to liquid nitrogen temperature presented a clear change near 225 K during cooling, corresponding to the MS (martensite start) temperature, as confirmed by resistivity measurements. Analysis of the resulting signals suggested a novel experimental technique that measures spontaneous magnetic emission during transformation, in the absence of any external field. Spontaneous magnetic noise emission measurements were registered in situ while cooling an initially austenitic sample in liquid nitrogen, showing that local microstructural changes, corresponding to an avalanche or "burst" phenomena, could be detected. This spontaneous magnetic emission (SME) can thus be considered a new experimental tool for the study of martensite transformations in ferrous alloys, at the same level as acoustic emission.

Emission Impacts of Electric Vehicles in the US Transportation Sector Following Optimistic Cost and Efficiency Projections.

Science.gov (United States)

Keshavarzmohammadian, Azadeh; Henze, Daven K; Milford, Jana B

2017-06-20

This study investigates emission impacts of introducing inexpensive and efficient electric vehicles into the US light duty vehicle (LDV) sector. Scenarios are explored using the ANSWER-MARKAL model with a modified version of the Environmental Protection Agency's (EPA) 9-region database. Modified cost and performance projections for LDV technologies are adapted from the National Research Council (2013) optimistic case. Under our optimistic scenario (OPT) we find 15% and 47% adoption of battery electric vehicles (BEVs) in 2030 and 2050, respectively. In contrast, gasoline vehicles (ICEVs) remain dominant through 2050 in the EPA reference case (BAU). Compared to BAU, OPT gives 16% and 36% reductions in LDV greenhouse gas (GHG) emissions for 2030 and 2050, respectively, corresponding to 5% and 9% reductions in economy-wide emissions. Total nitrogen oxides, volatile organic compounds, and SO 2 emissions are similar in the two scenarios due to intersectoral shifts. Moderate, economy-wide GHG fees have little effect on GHG emissions from the LDV sector but are more effective in the electricity sector. In the OPT scenario, estimated well-to-wheels GHG emissions from full-size BEVs with 100-mile range are 62 gCO 2 -e mi -1 in 2050, while those from full-size ICEVs are 121 gCO 2 -e mi -1 .

Nitrogen transformations and greenhouse gas emissions from a riparian wetland soil: An undisturbed soil column study

Energy Technology Data Exchange (ETDEWEB)

Munoz-Leoz, Borja [Department of Chemical and Environmental Engineering, University of the Basque Country, UPV/EHU, E-48013 Bilbao (Spain); Antigueedad, Inaki [Department of Geodynamic, University of the Basque Country, UPV/EHU, E-48940 Leioa (Spain); Garbisu, Carlos [Department of Ecosystems, NEIKER-Tecnalia, E-48160 Derio (Spain); Ruiz-Romera, Estilita, E-mail: estilita.ruiz@ehu.es [Department of Chemical and Environmental Engineering, University of the Basque Country, UPV/EHU, E-48013 Bilbao (Spain)

2011-01-15

Riparian wetlands bordering intensively managed agricultural fields can act as biological filters that retain and transform agrochemicals such as nitrate and pesticides. Nitrate removal in wetlands has usually been attributed to denitrification processes which in turn imply the production of greenhouse gases (CO{sub 2} and N{sub 2}O). Denitrification processes were studied in the Salburua wetland (northern Spain) by using undisturbed soil columns which were subsequently divided into three sections corresponding to A-, Bg- and B2g-soil horizons. Soil horizons were subjected to leaching with a 200 mg NO{sub 3}{sup -} L{sup -1} solution (rate: 90 mL day{sup -1}) for 125 days at two different temperatures (10 and 20 {sup o}C), using a new experimental design for leaching assays which enabled not only to evaluate leachate composition but also to measure gas emissions during the leaching process. Column leachate samples were analyzed for NO{sub 3}{sup -} concentration, NH{sub 4}{sup +} concentration, and dissolved organic carbon. Emissions of greenhouse gases (CO{sub 2} and N{sub 2}O) were determined in the undisturbed soil columns. The A horizon at 20 {sup o}C showed the highest rates of NO{sub 3}{sup -} removal (1.56 mg N-NO{sub 3}{sup -} kg{sup -1} DW soil day{sup -1}) and CO{sub 2} and N{sub 2}O production (5.89 mg CO{sub 2} kg{sup -1} DW soil day{sup -1} and 55.71 {mu}g N-N{sub 2}O kg{sup -1} DW soil day{sup -1}). For the Salburua wetland riparian soil, we estimated a potential nitrate removal capacity of 1012 kg N-NO{sub 3}{sup -} ha{sup -1} year{sup -1}, and potential greenhouse gas emissions of 5620 kg CO{sub 2} ha{sup -1} year{sup -1} and 240 kg N-N{sub 2}O ha{sup -1} year{sup -1}. - Research Highlights: {yields}A new experimental design is proposed for leaching assays to simulate nitrogen transformations in riparian wetland soil. {yields}Denitrification is the main process responsible for nitrate removal in the riparian zone of Salburua wetland. {yields

The coordinate transforming in geography information system

International Nuclear Information System (INIS)

Zhao Xiang; Chen Gang

2003-01-01

The coordinate transforming of geography information system includes two kinds of transforming, map projection and coordinate-transforming. This paper proposed a arithmetic of coordinate-transforming, it implement the transforming between the longitude-latitude coordinate and the screen coordinate and apply it in the GIS. The preferable effect was made. (authors)

Emissions inventories and options for control

Energy Technology Data Exchange (ETDEWEB)

Swart, R.J.; Van Amstel, A.R.; Van den Born, G.J.; Kroeze, C. [National Inst. of Public Health and Environmental Protection, Bilthoven (Netherlands)

1995-11-01

In 1990, little was known about the emissions of greenhouse gases in the Netherlands, notably those of the non-CO{sub 2} greenhouse gases. Uncertainties included the causes, the emissions factors and the regional distribution of emissions. The main objectives of the project at that time were formulated as follows: (a) provide information for prioritizing greenhouse gas emissions research in the Netherlands; (b) provide input data for global models (later shifted to the EDGAR-project); and (c) support national and international policy development. The emphasis of the project was on non-CO{sub 2} greenhouse gases, notably methane (CH{sub 4}) and nitrous oxide (N{sub 2}O). While state-of-the-art information from international research would be used and analyzed, the focus of the project was on the Dutch emissions and their causes. Information was drawn from literature research, discussions with national and international experts, and experimental information from several projects. 2 figs., 12 refs.

The Boston Methane Project: Mapping Surface Emissions to Inform Atmospheric Estimation of Urban Methane Flux

Science.gov (United States)

Phillips, N.; Crosson, E.; Down, A.; Hutyra, L.; Jackson, R. B.; McKain, K.; Rella, C.; Raciti, S. M.; Wofsy, S. C.

2012-12-01

Lost and unaccounted natural gas can amount to over 6% of Massachusetts' total annual greenhouse gas inventory (expressed as equivalent CO2 tonnage). An unknown portion of this loss is due to natural gas leaks in pipeline distribution systems. The objective of the Boston Methane Project is to estimate the overall leak rate from natural gas systems in metropolitan Boston, and to compare this flux with fluxes from the other primary methane emissions sources. Companion talks at this meeting describe the atmospheric measurement and modeling framework, and chemical and isotopic tracers that can partition total atmospheric methane flux into natural gas and non-natural gas components. This talk focuses on estimation of surface emissions that inform the atmospheric modeling and partitioning. These surface emissions include over 3,300 pipeline natural gas leaks in Boston. For the state of Massachusetts as a whole, the amount of natural gas reported as lost and unaccounted for by utility companies was greater than estimated landfill emissions by an order of magnitude. Moreover, these landfill emissions were overwhelmingly located outside of metro Boston, while gas leaks are concentrated in exactly the opposite pattern, increasing from suburban Boston toward the urban core. Work is in progress to estimate spatial distribution of methane emissions from wetlands and sewer systems. We conclude with a description of how these spatial data sets will be combined and represented for application in atmospheric modeling.

Mitigating greenhouse gas emissions: Voluntary reporting

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

The Voluntary Reporting Program, developed pursuant to Section 1605(b) of the Energy Policy Act of 1992, permits corporations, government agencies, households, and voluntary organizations to report on their emissions of greenhouse gases, and on actions taken that have reduced or avoided emissions or sequestered carbon, to the Energy Information Administration (EIA). This, the second annual report of the Voluntary Reporting Program, describes information provided by the participating organizations on their aggregate emissions and emissions reductions, as well as their emissions reduction or avoidance projects, through 1995. This information has been compiled into a database that includes reports from 142 organizations and descriptions of 967 projects that either reduced greenhouse gas emissions or sequestered carbon. Fifty-one reporters also provided estimates of emissions, and emissions reductions achieved, for their entire organizations. The projects described actions taken to reduce emissions of carbon dioxide from energy production and use; to reduce methane and nitrous oxide emissions from energy use, waste management, and agricultural processes; to reduce emissions of halocarbons, such as CFCs and their replacements; and to increase carbon sequestration.

Establishing credible emission reduction estimates: GERT's experience

International Nuclear Information System (INIS)

Loseth, H.

2001-01-01

To address the challenge of reducing the greenhouse gas emissions in Canada, the federal and provincial governments are developing strategies and policies to reach that goal. One of the proposed solutions is the establishment of an emission trading system, which it is believed would encourage investment in lower-cost reductions. The Greenhouse Gas Emission Reduction Trading (GERT) pilot was established in 1998 to examine emission trading. It represents the collaborative efforts of government, industry, and non-governmental organizations. It is possible to establish emission reduction trading outside of a regulated environment. Emission reduction is defined as being an action which reduces emissions when compared to what they would have been otherwise. The functioning of GERT was described from the initial application by a buyer/seller to the review process. The assessment of projects is based on mandatory criteria: reductions of emissions must be real, measurable, verifiable and surplus. A section of the presentation was devoted to landfill gas recovery project issues, while another dealt with fuel substitution project issues. Section 5 discussed emission reductions from an off-site source electricity project issues. figs

Time-resolved FTIR [Fourier transform infrared] emission studies of laser photofragmentation and chain reactions

International Nuclear Information System (INIS)

Leone, S.R.

1990-01-01

Recent progress is described resulting from the past three years of DOE support for studies of combustion-related photofragmentation dynamics, energy transfer, and reaction processes using a time-resolved Fourier transform infrared (FTIR) emission technique. The FTIR is coupled to a high repetition rate excimer laser which produces radicals by photolysis to obtain novel, high resolution measurements on vibrational and rotational state dynamics. The results are important for the study of numerous radical species relevant to combustion processes. The method has been applied to the detailed study of photofragmentation dynamics in systems such as acetylene, which produces C 2 H; chlorofluoroethylene to study the HF product channel; vinyl chloride and dichloroethylene, which produce HCl; acetone, which produces CO and CH 3 ; and ammonia, which produces NH 2 . In addition, we have recently demonstrated use of the FTIR technique for preliminary studies of energy transfer events under near single collision conditions, radical-radical reactions, and laser-initiated chain reaction processes

Projection of Denmark's energy consumption and emission of greenhouse gases 2012; Danmarks energifremskrivning 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-09-15

The Danish energy Agency's baseline projection of Denmark's energy consumption and greenhouse gas emissions is not a forecast, but describes the development which may occur in the coming years, based on a number of assumptions about technological development, prices, economic development, etc., hypothetically assuming that no new initiatives or measures beyond those already taken are implemented. The consumption of coal and natural gas are expected to fall by 50 % and 27 %, respectively, the next 8 years, and overall Denmark's fossil fuel consumption is reduced by approx. 120 PJ by 2020. Instead, renewable energy consumption will increase by more than 40 % from 2011 to 2020. The largest contribution to new renewable energy comes from the future offshore wind farms at Anholt, Krieger's Flak and Horns Rev, and from the increased use of biomass. With this conversion, the share of renewable energy in electricity supply is expected to increase from approx. 40 % in 2011 to around 69 % in 2020 and to 75 % in 2025. Final energy consumption drops from 640 PJ in 2011 to 632 PJ in 2020 as a consequence of a decline in industrial and household energy consumption, while the transport sector's energy consumption is expected to increase. With the projection's assumptions, a renewable energy share in the transport sector of 11 % may be achieved. Denmark's total greenhouse gas emissions are expected to decrease to 45.1 million tons of CO{sub 2} equivalent in 2020. This corresponds directly to the total emissions being reduced by 35 % compared to emissions in the 1990 base year. The figure is, however, highly uncertain. (LN)

Pollution from aircraft emissions in the North Atlantic flight corridor. Overview on the results of the POLINAT project

Energy Technology Data Exchange (ETDEWEB)

Schumann, U; Duerbeck, T; Feigl, C [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Wessling (Germany); Arnold, F; Droste-Franke, B [Max-Planck-Inst. fuer Kernphysik, Heidelberg (Germany); Flatoy, F [Bergen Univ. (Norway). Inst. of Geophysics; Ford, I J [University Coll., London (United Kingdom); Hagen, D E; Hopkins, A R [Missouri Univ., Rolla, MO (United States). Lab. for Cloud and Aerosol Sciences; Hayman, G D [National Environmental Technology Centre, AEA Technology, Culham (United Kingdom); others, and

1998-12-31

The POLINAT project (phase 1) was performed 1994 to 1996 within the Environment Research Programme of the European Commission. POLINAT-2 is being performed now since April 1996. The objectives of POLINAT-1 and -2, the methods used, the measurements, and some selected results are described. Details are given on the measured background concentrations, the emission indices of several aircraft, comparisons between modelled and measured data, and the impact of the emissions within the North Atlantic flight corridor. (author) 21 refs.

Pollution from aircraft emissions in the North Atlantic flight corridor. Overview on the results of the POLINAT project

Energy Technology Data Exchange (ETDEWEB)

Schumann, U.; Duerbeck, T.; Feigl, C. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Wessling (Germany); Arnold, F.; Droste-Franke, B. [Max-Planck-Inst. fuer Kernphysik, Heidelberg (Germany); Flatoy, F. [Bergen Univ. (Norway). Inst. of Geophysics; Ford, I.J. [University Coll., London (United Kingdom); Hagen, D.E.; Hopkins, A.R. [Missouri Univ., Rolla, MO (United States). Lab. for Cloud and Aerosol Sciences; Hayman, G.D. [National Environmental Technology Centre, AEA Technology, Culham (United Kingdom); and others

1997-12-31

The POLINAT project (phase 1) was performed 1994 to 1996 within the Environment Research Programme of the European Commission. POLINAT-2 is being performed now since April 1996. The objectives of POLINAT-1 and -2, the methods used, the measurements, and some selected results are described. Details are given on the measured background concentrations, the emission indices of several aircraft, comparisons between modelled and measured data, and the impact of the emissions within the North Atlantic flight corridor. (author) 21 refs.

Field line projections of 6300 AA auroral emissions into the outer magnetosphere

International Nuclear Information System (INIS)

Shepherd, M.M.

1979-07-01

An empirical magnetospheric model is employed to project auroral intensity boundaries into the magnetosphere. The auroral data are in the form of instantaneous maps of 6300AA emission, acquired with the ISIS-II spacecraft and correspond to fluxes of low energy electrons. These are specific to a particular universal time and date. The magnetospheric model used is a purely empirical one, designed by Mead and Fairfield (1975) from 44.76 x 10 6 magnetic measurements made by 4 IMP satellites. Their model includes the dipole tilt as a variable, and permits selection from four different disturbance levels, so is particularly suited to these data. In a general way, the auroral projections agree with what is expected, giving some confidence in this application of the model. But a number of features appear that were not predicted, and which should permit new insights into the relationship of specific auroral boundaries to the structure of the magnetosphere. (author)

The embodied energy and environmental emissions of construction projects in China: An economic input-output LCA model

International Nuclear Information System (INIS)

Chang Yuan; Ries, Robert J.; Wang Yaowu

2010-01-01

A complete understanding of the resource consumption, embodied energy, and environmental emissions of civil projects in China is difficult due to the lack of comprehensive national statistics. To quantitatively assess the energy and environmental impacts of civil construction at a macro-level, this study developed a 24 sector environmental input-output life-cycle assessment model (I-O LCA) based on 2002 Chinese national economic and environmental data. The model generates an economy-wide inventory of energy use and environmental emissions. Estimates based on the level of economic activity related to planned future civil works in 2015 are made. Results indicate that the embodied energy of construction projects accounts for nearly one-sixth of the total economy's energy consumption in 2007, and may account for approximately one-fifth of the total energy use by 2015. This energy consumption is dominated by coal and oil consumptions. Energy-related emissions are the main polluters of the country's atmosphere and environment. If the industry's energy use and manufacturing techniques remain the same as in 2002, challenges to the goals for total energy consumption in China will appear in the next decade. Thus, effective implementation of efficient energy technologies and regulations are indispensable for achieving China's energy and environmental quality goals.

Greenhouse gas emission trends and projections in Europe 2011. Tracking progress towards Kyoto and 2020 targets

Energy Technology Data Exchange (ETDEWEB)

Busche, J.; Scheffler, M.; Graichen, V. (Umweltbundesamt, Vienna (Austria)) (and others)

2011-10-15

At the end of 2010, the EU-15 was on track to achieve its Kyoto target but three EU-15 Member States (Austria, Italy and Luxembourg) were not on track to meet their burden-sharing targets. These countries must therefore seriously consider further action to ensure compliance, in particular revising their plans on using flexible mechanisms. Among the EEA member countries outside the EU, Liechtenstein and Switzerland were not on track to achieve their Kyoto target at the end of 2009. All other European countries are on track to meet their targets, either based on domestic emissions only or with the assistance of Kyoto mechanisms. The economic recession had a significant impact on the EU's total greenhouse gas (GHG) emission trends but a more limited effect on progress towards Kyoto targets. This is because emissions in the sectors covered by the EU Emissions Trading Scheme (ETS), which were most affected by the crisis, do not affect Kyoto compliance once ETS caps have been set. With existing national measures, Member States do not project enough emission reductions for the EU to meet its unilateral 20 % reduction commitment in 2020. Additional measures currently planned by Member States will help further reduce emissions but will be insufficient to achieve the important emission cuts needed in the longer term. By 2020 Member States must enhance their efforts to reduce emissions in non-EU ETS sectors, such as the residential, transport or agriculture sectors, where legally binding national targets have been set under the EU's 2009 climate and energy package. (Author)

Implementing SO2 Emissions in China

International Nuclear Information System (INIS)

Schreifels, J.; Yang, J.

2003-01-01

Over the past 10 years, the Chinese State Environmental Protection Administration (SEPA) has actively investigated the potential to use emission trading to reduce sulphur dioxide (SO2) emissions from electricity generators and industrial sources. In 1999, SEPA partnered with the U.S. Environmental Protection Agency (U.S. EPA) to cooperate on a study to assess the feasibility of implementing SO2 emission trading in China. SEPA has also pursued emission trading pilot projects in several cities and provinces. The authors, using information from the feasibility study and pilot projects, introduce the circumstances necessary for SO2 emission trading in China, outline the experience to date, and analyse implementation opportunities and barriers in China. The contents of the paper are: (1) SO2 emission control policies in China; (2) institutional requirements and the basis for introducing SO2 emission trading in China; (3) case studies of emission trading in China; (4) opportunities and barriers to implementing emission trading in China; (5) recommendations to transition from pilot projects to a nationwide SO2 emission trading program; and (6) conclusions and suggestions

Project-Based Emissions Trading. The Impact of Institutional Arrangements on Cost-Effectiveness

International Nuclear Information System (INIS)

Woerdman, E.; Van der Gaast, W.

2001-01-01

In this paper we demonstrate that the institutional arrangement (or: design) of Joint Implementation (JI) and the Clean Development Mechanism (CDM) has a decisive impact on their cost-effectiveness. We illustrate our arguments by statistically analyzing the costs from 94 Activities Implemented Jointly (AIJ) pilot phase projects as well as by adjusting these data on the basis of simple mathematical formulas. These calculations explicitly take into account the institutional differences between JI (sinks, no banking) and the CDM (banking, no sinks) under the Kyoto Protocol and also show the possible effects on credit costs of alternative design options. However, our numerical illustrations should be viewed with caution, because AIJ is only to a limited extent representative of potential future JI and CDM projects and because credit costs are not credit prices. Some of the main figures found in this study are: an average cost figure per unit of emission reduction for AIJ projects of 46 dollar per ton of carbon dioxide equivalent ($/Mg CO 2 -eq), an average potential JI credit cost figure which is lowered to 37 $/Mg CO 2 -eq by introducing banking and an average of 6 $/Mg CO 2 -eq per credit for potential low-cost CDM projects which includes sinks. However, at CoP6 in November 2000 in The Hague (The Netherlands), the Parties to the Framework Convention on Climate Change (FCCC) did not (yet) reach consensus on the institutional details of the project-based mechanisms, such as the possible arrangement of early JI action or the inclusion of sinks under the CDM. 55 refs

METAPHYSICAL REVOLUTION OF DESCARTES AND TRANSFORMATION OF THE ANTHROPOLOGICAL PROJECT

Directory of Open Access Journals (Sweden)

Anatolii M. Malivskyi

2015-05-01

Full Text Available The purpose is to reveal and comprehend forms of influence metaphysical' revolution for a way of interpretation of the anthropological project by Descartes on the basis of investigations of modern dekartes's researchers, that is the recognition of a fundamental role of metaphysics. Methodology. As methodological base modern investigations of dekartes's researchers accenting a fundamental role of metaphysics and expediency of unbiassed judgment of heritage of the great thinker are used. The scientific novelty. The transformation of the anthropological project is outlined as manifestation of metaphysical revolution. It is about a transcendencecy of naive anthropology (as an embodiment of reductive mindset, that is interpretations of human nature as its corporality and transition to metaphysical anthropology which consists in upholding of unconditional priority of human thinking as associated with God. As result of transition concentration of attention on intense human nature, that is at tension between sensuality and intelligence, aspiration to truth and tendency to delusion, between Life and Nothing, etc. Conclusions. The appeal to the incomplete anthropological project of Descartes on the basis of innovative researches allows proving the thesis about influence of metaphysical revolution on a way of its interpretation. The main forms of oriented to science ideals of naive anthropology, trust in evidence of the senses, atheism, interpretation of science as the main form of detection rationality of human nature, which Descartes tends constructively to overcome in the text of "meditation", are highlighted. During creation of metaphysical anthropology the attention of the thinker is drawn by the fact of impossibility of comprehension of human nature by means of natural-science rationality and expediency of the appeal to metaphysics. The subject of attention of the thinker is the tension between sensuality and intelligence, need

Emission, Dispersion, Transformation, and Deposition of Asian Particulates Over the Western Pacific Ocean. Part II

International Nuclear Information System (INIS)

Turco, Richard P.

2005-01-01

In this project we developed and applied a coupled three-dimensional meteorology/chemistry/microphysics model to study the patterns of aerosol dispersion and deposition in the western Pacific area; carried out a series of detailed regional aerosol simulations to test the ability of models to treat emission, dispersion and removal processes prior to long-range transport; calculated and analyzed trajectories that originate in Asian dust source regions and reach the Pacific Basin; performed detailed simulations of regional and trans-Pacific transport, as well as the microphysical and chemical properties, of aerosols in the Asia-Pacific region to quantify processes that control the emission, dispersion and removal of particles; and assessed the contributions of regional-scale Asian particulate sources to the deposition of pollutants onto surface waters. The transport and deposition of aerosols and vapors were found to be strongly controlled by large and synoptic scale meteorology, convection, turbulence, and precipitation, as well as strong interactions between surface conditions and topographical features. The present analysis suggests that accurate representations of aerosol sources, transport and deposition can be obtained using a comprehensive modeling approach

Proton induced X-ray emission (PIXE) technique for determining multi-element composition of transformed hairy root cultures of Boerhaavia diffusa L. An important medicinal herb

International Nuclear Information System (INIS)

Lopamudra Sahu; Chand, P.K.; Ray, D.K.; Utkal University, Vani Vihar, Bhubaneswar, Odisha

2014-01-01

Therapeutically important inorganic elements in Agrobacterium rhizogenes-mediated genetically transformed hairy root cultures (HRCs) of a pharmaceutically significant herb Boerhaavia diffusa were quantified using proton induced X-ray emission technique. This was compared with that of roots from the naturally grown donor plant. Two macro-elements (Ca and K) and eight different trace elements namely V, Cr, Mn, Fe, Co, Cu Zn, and Ni were detected and their content was determined. In HRCs of a transformed rhizoclone, calcium and potassium had values which were significantly higher than that of in vivo roots. The concentrations of several trace elements, which are known to have a positive implication in human healthcare, were found to be either comparable (Fe) to that in the natural root samples or higher (Mn, Zn, Cr, Cu, Co) in the transformed rhizoclone. The genetically transformed HRCs can thus serve as a fast-proliferating renewable resource of medicinally useful minerals targeting specific diseases. (author)

Cancerous tissue mapping from random lasing emission spectra

International Nuclear Information System (INIS)

Polson, R C; Vardeny, Z V

2010-01-01

Random lasing emission spectra have been collected from both healthy and cancerous tissues. The two types of tissue with optical gain have different light scattering properties as obtained from an average power Fourier transform of their random lasing emission spectra. The difference in the power Fourier transform leads to a contrast between cancerous and benign tissues, which is utilized for tissue mapping of healthy and cancerous regions of patients

Wigner distribution and fractional Fourier transform

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.; Boashash, B.

2003-01-01

We have described the relationship between the fractional Fourier transform and the Wigner distribution by using the Radon-Wigner transform, which is a set of projections of the Wigner distribution as well as a set of squared moduli of the fractional Fourier transform. We have introduced the concept

Transformation on Abandonment

DEFF Research Database (Denmark)

Krag, Mo Michelsen Stochholm

2016-01-01

This paper outlines a research project on the increasing quantity of abandoned houses in the depopulating rural villages, and it reports on how an attempt is made to establish a counter-practice of radical preservation based on a series of full-scale transformations of abandoned buildings. The aim...... of the transformations is to reveal and preserve material and immaterial values such as aspects of cultural heritage, local narratives, and building density. The responses of local people are used as a feedback mechanism and considered an important impact indicator. Eleven transformations of varying strategies have...... houses. Transformation prototypes are tested as present manifestations in rural villages as an alternative way to preserve buildings as well as memories....

A Hybrid Life-Cycle Assessment of Nonrenewable Energy and Greenhouse-Gas Emissions of a Village-Level Biomass Gasification Project in China

Directory of Open Access Journals (Sweden)

Mingyue Pang

2012-07-01

Full Text Available Small-scale bio-energy projects have been launched in rural areas of China and are considered as alternatives to fossil-fuel energy. However, energetic and environmental evaluation of these projects has rarely been carried out, though it is necessary for their long-term development. A village-level biomass gasification project provides an example. A hybrid life-cycle assessment (LCA of its total nonrenewable energy (NE cost and associated greenhouse gas (GHG emissions is presented in this paper. The results show that the total energy cost for one joule of biomass gas output from the project is 2.93 J, of which 0.89 J is from nonrenewable energy, and the related GHG emission cost is 1.17 × 10⁻⁴ g CO₂-eq over its designed life cycle of 20 years. To provide equivalent effective calorific value for cooking work, the utilization of one joule of biomass gas will lead to more life cycle NE cost by 0.07 J and more GHG emissions by 8.92 × 10⁻⁵ g CO₂-eq compared to natural gas taking into consideration of the difference in combustion efficiency and calorific value. The small-scale bio-energy project has fallen into dilemma, i.e., struggling for survival, and for a more successful future development of village-level gasification projects, much effort is needed to tide over the plight of its development, such as high cost and low efficiency caused by decentralized construction, technical shortcomings and low utilization rate of by-products.

Wave emission by resonance crossing

International Nuclear Information System (INIS)

Tracy, E.R.; Kaufman, A.N.; Liang, Y.

1995-01-01

The emission of collective waves by a moving charged particle in a nonuniform medium is discussed. Emission occurs in a nonuniform medium when the local dispersion relation of the collective wave is satisfied. This is a form of resonance crossing. Using the Weyl symbol calculus, a local expansion of the collective wave equation driven by the particle source is derived in the neighborhood of the crossing. The collective wave dispersion manifold and the gyroballistic wave dispersion manifold can be used as a pair of local coordinates in the neighborhood of the resonance crossing, which greatly simplifies the analysis. This change of representation is carried out using a metaplectic transform (a generalization of the fourier transform). The Wigner function of the emitted wave field is then computed in the new coordinates. The Wigner function is a phase space scalar, hence the numerical value is invariant under linear canonical transformations. This invariance is invoked to finally arrive at the Wigner function in the original (physical) coordinates. The wave-action and -energy emission rates are then computed from the Wigner function. copyright 1995 American Institute of Physics

Greenhouse gas emission trends and projections in Europe 2012. Tracking progress towards Kyoto and 2020 targets

Energy Technology Data Exchange (ETDEWEB)

Gores, S.; Scheffler, M.; Graichen, V. [Oeko-Institut (Oeko), Freiburg (Germany)] [and others

2012-10-15

At the end of 2011, almost all European countries were on track towards their Kyoto targets for 2008-2012. The EU-15 also remained on track to achieve its Kyoto target. Italy, however, was not on track. Spain plans to acquire a large quantity of Kyoto units through the KP's flexible mechanisms to achieve its target. With emission caps already set for the economic sectors under the EU Emissions Trading Scheme (EU ETS), emissions reductions during 2012 in the sectors outside the EU ETS together with reductions by carbon sinks will set the frame for how many Kyoto units Member States need to acquire to reach their individual targets. Hence, both the development and delivery of adequate plans to acquire enough Kyoto credits is becoming increasingly important. ETS emissions from 2008 to 2011 were on average 5 % below these caps, which results in an oversupply of allowances. The EU ETS is undergoing important changes in view of the third trading phase from 2013 to 2020. Most EU Member States project that in 2020, their emissions outside the EU ETS will be lower than their national targets set under the Climate and Energy Package. However, further efforts will be necessary to achieve longer term reductions. (Author)

Low Emissions Alternative Power (LEAP) Project Office Business Team of the Aeropropulsion Research Program Office (ARPO) Org. 0140

Science.gov (United States)

Buttler, Jennifer A.

2004-01-01

The program for which I am working at this summer is Propulsion and Power/Low Emissions Alternative Power (P&P/LEAP). It invests in a fundamental TRL 1-6 research and technology portfolio that will enable the future of: Alternative fuels and/or alternative propulsion systems, non-combustion (electric) propulsion systems. P&P/LEAP will identify and capitalize on the highest potential concepts generated both internal and external to the Agency. During my 2004 summer at NASA Glenn Research Center, I worked with my mentor Barbara Mader, in the Project Office with the Business Team completing various tasks for the project and personnel. The LEAP project is a highly matrixed organization. The Project Office is responsible for the goals advocacy and dollar (budget) of the LEAP project. The objectives of the LEAP Project are to discover new energy sources and develop unconventional engines and power systems directed towards greatly reduced emissions, enable new vehicle concepts for public mobility, new science missions and national security. The Propulsion and PowerLow Emissions Alternative Power directly supports the environmental, mobility, national security objectives of the Vehicle Systems Program and the Aeronautics Technology Theme. Technology deliverables include the demonstration through integrated ground tests, a constant volume combustor in an engine system, and UAV/small transport aircraft all electric power system. My mentor serves as a key member of the management team for the Aeropropulsion Research Program Office (ARPO). She has represented the office on numerous occasions, and is a member of a number of center-wide panels/teams, such as the Space management Committee and is chair to the Business Process Consolidation Team. She is responsible for the overall coordination of resources for the Propulsion and Power Project - from advocacy to implementation. The goal for my summer at NASA was to document processes and archive program documents from the past

Holland bought Slovakian's emission quotas

International Nuclear Information System (INIS)

TREND

2003-01-01

It is not a direct trade but more an environmental investment. Dutch government decided to buy over 5 million tons of carbon dioxide emission quotas of Rumania, Hungary and Slovakia. But this is not a direct purchase; it is related to investments into major projects that would decrease emission of greenhouse gases in the mentioned countries. Holland will improve its emission balance set by Kyoto Protocol and 'on the other hand we will offer eastern European countries technologies they are missing,' explained the main objectives of Dutch environmental projects Erik Saat from Senter agency at Dutch Ministry of Economy. The Dutch agency has so far selected one project in Slovakia - absorption of methane gas on waste dumps of eight Slovak towns. This project in value of 5 million Euro will decrease the emission by an equivalent of 500 thousand tons of CO 2 . Slovak Ministry of Environment that has to approve these projects welcomes any activity that would lead to decreasing greenhouse gas pollution. Every three months Senter agency select the best projects submitted in order to fulfil the commitments resulting from Kyoto Protocol. (Author)

Effect of annealing on field emission properties of nanodiamond coating

International Nuclear Information System (INIS)

Zhai, C.X.; Yun, J.N.; Zhao, L.L.; Zhang, Z.Y.; Wang, X.W.; Chen, Y.Y.

2011-01-01

Field electron emission of detonation nanodiamond (ND) coated on a titanium substrate by electrophoretic deposition is investigated. It is found that thermal annealing can significantly improve the field emission properties of the ND layer, which can be mainly attributed to the formation of the TiC phase between diamond and Ti. The first-principles calculated results show that the formation of transition layers can lower the interface barrier and enhance the field electron emission of ND coating. Besides, the transformation of diamond to graphite after annealing has been revealed by Raman spectra. This transformation also benefits the electron emission enhancement.

Effect of annealing on field emission properties of nanodiamond coating

Energy Technology Data Exchange (ETDEWEB)

Zhai, C.X., E-mail: zhaicatty@126.co [School of Information Science and Technology, Northwest University, Xi' an 710127, Shaanxi (China); Yun, J.N.; Zhao, L.L.; Zhang, Z.Y.; Wang, X.W.; Chen, Y.Y. [School of Information Science and Technology, Northwest University, Xi' an 710127, Shaanxi (China)

2011-03-01

Field electron emission of detonation nanodiamond (ND) coated on a titanium substrate by electrophoretic deposition is investigated. It is found that thermal annealing can significantly improve the field emission properties of the ND layer, which can be mainly attributed to the formation of the TiC phase between diamond and Ti. The first-principles calculated results show that the formation of transition layers can lower the interface barrier and enhance the field electron emission of ND coating. Besides, the transformation of diamond to graphite after annealing has been revealed by Raman spectra. This transformation also benefits the electron emission enhancement.

Coronal Physics and the Chandra Emission Line Project

Science.gov (United States)

Brickhouse, N. S.; Drake, J. J.

2000-01-01

With the launch of the Chandra X-ray Observatory, high resolution X-ray spectroscopy of cosmic sources has begun. Early, deep observations of three stellar coronal sources Capella, Procyon, and HR 1099 are providing not only invaluable calibration data, but also benchmarks for plasma spectral models. These models are needed to interpret data from stellar coronae, galaxies and clusters of galaxies, supernova, remnants and other astrophysical sources. They have been called into question in recent years as problems with understanding low resolution ASCA and moderate resolution Extreme Ultraviolet Explorer Satellite (EUVE) data have arisen. The Emission Line Project is a collaborative effort, to improve the models, with Phase I being the comparison of models with observed spectra of Capella, Procyon, and HR 1099. Goals of these comparisons are (1) to determine and verify accurate and robust diagnostics and (2) to identify and prioritize issues in fundamental spectroscopy which will require further theoretical and/or laboratory work. A critical issue in exploiting the coronal data for these purposes is to understand the extent, to which common simplifying assumptions (coronal equilibrium, negligible optical depth) apply. We will discuss recent, advances in our understanding of stellar coronae, in this context.

Acoustic emission

International Nuclear Information System (INIS)

Straus, A.; Lopez Pumarega, M.I.; Di Gaetano, J.O.; D'Atellis, C.E.; Ruzzante, J.E.

1990-01-01

This paper is related to our activities on acoustic emission (A.E.). The work is made with different materials: metals and fibre reinforced plastics. At present, acoustic emission transducers are being developed for low and high temperature. A test to detect electrical discharges in electrical transformers was performed. Our experience in industrial tests to detect cracks or failures in tanks or tubes is also described. The use of A.E. for leak detection is considered. Works on pattern recognition of A.E. signals are also being performed. (Author)

US effort on HTS power transformers

Energy Technology Data Exchange (ETDEWEB)

Mehta, S., E-mail: shirish.pmehta@spx.com [Waukesha Electric Systems, 400 S. Praire Avenue, Waukesha, WI 53186 (United States)

2011-11-15

Fault Current Limiting HTS Transformer development program plan is presented. Benefits of FCL HTS Transformers for power delivery system. Independent program review process is described. Transformer specifications, site requirement described. Waukesha Electric Systems has been working in HTS power transformers development program under the auspices of US Government Department of Energy since 1994. This presentation will describe various milestones for this program and program history along with the lessons learned along the way. Our motivations for working on this development program based on man benefits offered by HTS power transformers to power delivery systems will be discussed. Based on various issues encountered during execution of many HTS projects, DOE has set up an independent program review process that is lead by team of experts. This team reviews are integral part of all DOE HTS projects. Success of all projects would be greatly enhanced by identifying critical issues early in the program. Requiring appropriate actions to mitigate the issues before processing further will lead to proactive interrogation and incorporation of expert's ideas in the project plans. Working of this review process will be also described in this presentation. Waukesha Electric Systems team including: Superpower-Inc, Oak Ridge National Laboratory, University of Houston Center for Superconductivity and Southern California Edison company was awarded a cost share grant by US Government in 2010 for development of a fault current limiting HTS power transformer. This multi year's program will require design, manufacture, installation, and monitoring of a 28 MVA tree phase transformer installed at Irvine CA. Smart Grid demonstration site. Transformer specifications along with requirements for fault current limiting and site requirement will be discussed. Design and development of various sub systems in support of this program including: HTS conductor performance specification

US effort on HTS power transformers

International Nuclear Information System (INIS)

Mehta, S.

2011-01-01

Fault Current Limiting HTS Transformer development program plan is presented. Benefits of FCL HTS Transformers for power delivery system. Independent program review process is described. Transformer specifications, site requirement described. Waukesha Electric Systems has been working in HTS power transformers development program under the auspices of US Government Department of Energy since 1994. This presentation will describe various milestones for this program and program history along with the lessons learned along the way. Our motivations for working on this development program based on man benefits offered by HTS power transformers to power delivery systems will be discussed. Based on various issues encountered during execution of many HTS projects, DOE has set up an independent program review process that is lead by team of experts. This team reviews are integral part of all DOE HTS projects. Success of all projects would be greatly enhanced by identifying critical issues early in the program. Requiring appropriate actions to mitigate the issues before processing further will lead to proactive interrogation and incorporation of expert's ideas in the project plans. Working of this review process will be also described in this presentation. Waukesha Electric Systems team including: Superpower-Inc, Oak Ridge National Laboratory, University of Houston Center for Superconductivity and Southern California Edison company was awarded a cost share grant by US Government in 2010 for development of a fault current limiting HTS power transformer. This multi year's program will require design, manufacture, installation, and monitoring of a 28 MVA tree phase transformer installed at Irvine CA. Smart Grid demonstration site. Transformer specifications along with requirements for fault current limiting and site requirement will be discussed. Design and development of various sub systems in support of this program including: HTS conductor performance specification

Influence of Biochar on C and N Transformation in Soil and Their Impact on Greenhouse Gas Emissions

Science.gov (United States)

Chintala, R.; Schumacher, T. E.; Kumar, S.; Clay, D. E.; Malo, D. D.

2014-12-01

(microbial biomass N, inorganic N, and δ 15N). Greenhouse gas fluxes (CO2, CH4, and N2O) were measured and correlation studies will be conducted to determine the relationship with the interference effect of biochars on C and N transformation in soil. Initial data shows that biochar has an impact especially on CO2, and N2O emissions.

Exponential x-ray transform

International Nuclear Information System (INIS)

Hazou, I.A.

1986-01-01

In emission computed tomography one wants to determine the location and intensity of radiation emitted by sources in the presence of an attenuating medium. If the attenuation is known everywhere and equals a constant α in a convex neighborhood of the support of f, then the problem reduces to that of inverting the exponential x-ray transform P/sub α/. The exponential x-ray transform P/sub μ/ with the attenuation μ variable, is of interest mathematically. For the exponential x-ray transform in two dimensions, it is shown that for a large class of approximate δ functions E, convolution kernels K exist for use in the convolution backprojection algorithm. For the case where the attenuation is constant, exact formulas are derived for calculating the convolution kernels from radial point spread functions. From these an exact inversion formula for the constantly attenuated transform is obtained

A collaborative project on the effects of coal quality on NO{sub x} emissions and carbon burnout in pulverised coal-fired utility boilers

Energy Technology Data Exchange (ETDEWEB)

Tilley, H.A.; O`Connor, M.; Stephenson, P.L.; Whitehouse, M.; Richards, D.G.; Hesselmann, G.; MacPhail, J.; Lockwood, F.C.; Williamson, J.; Williams, A.; Pourkashanian, M. [ETSU, Harwell (United Kingdom)

1998-12-01

This paper describes a UK Department of Trade and Industry-supported collaborative project entitled `The Effects of Coal Quality on Emission of Oxides of Nitrogen (NO{sub x}) and Carbon Burnout in Pulverised Coal-fired Utility Boilers`. The project involved extensive collaboration between the UK power generators, boiler and burner manufacturers and research groups in both industry and academia, together with several of the world`s leading computational fluid dynamics (CFD) `software houses`. The prime objectives of the project were to assess the relationship between NO{sub x} emissions and carbon burnout and to develop and validate predictive tools for assessing coals. Experimental work was carried out on various laboratory-scale apparatus and on single burner test facilities ranging from 160 kW{sub th} to 40 MW{sub th} in size and measurements were obtained from full-scale 500 MW{sub e} utility boiler trials. This data and basic coal data were then used to develop mathematical models to predict full-scale boiler performance with respect to NO{sub x} emissions and carbon-in-ash. Results showed good correlations for NO{sub x} and carbon burnout when comparing data from full-scale and large-scale rig trials. Laboratory-scale tests were found to be useful but the influence of burner aerodynamics was more difficult to quantify. Modelling showed that predicted NO{sub x} emissions were encouragingly close to measured emissions but predicting carbon burnout was less successful. 24 refs., 4 figs., 6 tabs.

A DC Transformer

Data.gov (United States)

National Aeronautics and Space Administration — The goal of the project was to demonstrate a true direct current (DC) transformer, a new electro-mechanical component with potentially high power applications; in...

CO{sub 2}-emissions from future waste incineration - Sub-Project 5; CO{sub 2}-utslaepp fraan framtida avfallsfoerbraanning - Delprojekt 5 inom projektet Perspektiv paa framtida avfallsbehandling

Energy Technology Data Exchange (ETDEWEB)

Bisaillon, Mattias; Detterfelt, Lia; Edner, Stig; Maartenssson, Paal

2013-09-01

The use of fossil fuels in Swedish district heating systems has fallen sharply. With continued pressure from society to reduce emissions of greenhouse gases, it is likely that the use of these fuels will decrease further. The major remaining source of emissions of fossil carbon dioxide (CO{sub 2}) from district heating systems 2020 is waste incineration with energy recovery in the form of electricity and heat. The aim of this project was, from two perspectives (stack perspective and system perspective), to analyze future emissions of fossil CO{sub 2} from Swedish waste incineration in the Swedish district heating systems. By studying both perspectives at the same time, the results answer whether changes in emissions in one perspective give similar or opposite effects seen from the other perspective. The purpose was also to make cost estimates for emission reduction measures affecting waste, energy and material production system. These costs were related to the price of allowances in the EU ETS and to the Swedish carbon tax. The project was performed in 2012 as a part of the research project 'Perspectives on sustainable waste treatment'.

[Restoration filtering based on projection power spectrum for single-photon emission computed tomography].

Science.gov (United States)

Kubo, N

1995-04-01

To improve the quality of single-photon emission computed tomographic (SPECT) images, a restoration filter has been developed. This filter was designed according to practical "least squares filter" theory. It is necessary to know the object power spectrum and the noise power spectrum. The power spectrum is estimated from the power spectrum of a projection, when the high-frequency power spectrum of a projection is adequately approximated as a polynomial exponential expression. A study of the restoration with the filter based on a projection power spectrum was conducted, and compared with that of the "Butterworth" filtering method (cut-off frequency of 0.15 cycles/pixel), and "Wiener" filtering (signal-to-noise power spectrum ratio was a constant). Normalized mean-squared errors (NMSE) of the phantom, two line sources located in a 99mTc filled cylinder, were used. NMSE of the "Butterworth" filter, "Wiener" filter, and filtering based on a power spectrum were 0.77, 0.83, and 0.76 respectively. Clinically, brain SPECT images utilizing this new restoration filter improved the contrast. Thus, this filter may be useful in diagnosis of SPECT images.

Restoration filtering based on projection power spectrum for single-photon emission computed tomography

International Nuclear Information System (INIS)

Kubo, Naoki

1995-01-01

To improve the quality of single-photon emission computed tomographic (SPECT) images, a restoration filter has been developed. This filter was designed according to practical 'least squares filter' theory. It is necessary to know the object power spectrum and the noise power spectrum. The power spectrum is estimated from the power spectrum of a projection, when the high-frequency power spectrum of a projection is adequately approximated as a polynomial exponential expression. A study of the restoration with the filter based on a projection power spectrum was conducted, and compared with that of the 'Butterworth' filtering method (cut-off frequency of 0.15 cycles/pixel), and 'Wiener' filtering (signal-to-noise power spectrum ratio was a constant). Normalized mean-squared errors (NMSE) of the phantom, two line sources located in a 99m Tc filled cylinder, were used. NMSE of the 'Butterworth' filter, 'Wiener' filter, and filtering based on a power spectrum were 0.77, 0.83, and 0.76 respectively. Clinically, brain SPECT images utilizing this new restoration filter improved the contrast. Thus, this filter may be useful in diagnosis of SPECT images. (author)

Project ARES analysis of strategies of greenhouse effect gases emissions reduction. Synthesis report july 2002

International Nuclear Information System (INIS)

Criqui, P.; Blanchard, O.; Kitous, A.; Hourcade, J.Ch.; Ghersi, F.; Kousnetzoff, N.; Genet, J.; Fahr, St.; Soria, A.; Russ, P.

2002-07-01

The ARES project was realized around three main activities. The first part was the elaboration by the CEPII of a scenario of a world economic growth, detailed by region for the year 2030. The second part develops by the IEPE a scenario of allocation of emission quotas for the year 2030, by a gradual reduction of the emissions growth in the developing countries, the evaluation of the scenario from the POLES model, with a comparison of the results with the alternative models described in literature or proposed by the negotiation. The last part is the extension and the development by the CIRED of the 14 zones IMACLIM model, the elaboration of interfaces with POLES and the study of the general equilibrium effects of the different attribution scenari studied by the IEPE. (A.L.B.)

Homogeneous and Heterogeneous Reaction and Transformation of Hg and Trace Metals in Combustion Systems

Energy Technology Data Exchange (ETDEWEB)

J. Helble; Clara Smith; David Miller

2009-08-31

The overall goal of this project was to produce a working dynamic model to predict the transformation and partitioning of trace metals resulting from combustion of a broad range of fuels. The information provided from this model will be instrumental in efforts to identify fuels and conditions that can be varied to reduce metal emissions. Through the course of this project, it was determined that mercury (Hg) and arsenic (As) would be the focus of the experimental investigation. Experiments were therefore conducted to examine homogeneous and heterogeneous mercury oxidation pathways, and to assess potential interactions between arsenic and calcium. As described in this report, results indicated that the role of SO{sub 2} on Hg oxidation was complex and depended upon overall gas phase chemistry, that iron oxide (hematite) particles contributed directly to heterogeneous Hg oxidation, and that As-Ca interactions occurred through both gas-solid and within-char reaction pathways. Modeling based on this study indicated that, depending upon coal type and fly ash particle size, vaporization-condensation, vaporization-surface reaction, and As-CaO in-char reaction all play a role in arsenic transformations under combustion conditions.

Particulate Emissions Control using Advanced Filter Systems: Final Report for Argonne National Laboratory, Corning Inc. and Hyundai Motor Company CRADA Project

Energy Technology Data Exchange (ETDEWEB)

Seong, Hee Je [Argonne National Lab. (ANL), Argonne, IL (United States); Choi, Seungmok [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-10-09

This is a 3-way CRADA project working together with Corning, Inc. and Hyundai Motor Co. (HMC). The project is to understand particulate emissions from gasoline direct-injection engines (GDI) and their physico-chemical properties. In addition, this project focuses on providing fundamental information about filtration and regeneration mechanisms occurring in gasoline particulate filter (GPF) systems. For the work, Corning provides most advanced filter substrates for GPF applications and HMC provides three-way catalyst (TWC) coating services of these filter by way of a catalyst coating company. Then, Argonne National Laboratory characterizes fundamental behaviors of filtration and regeneration processes as well as evaluated TWC functionality for the coated filters. To examine aging impacts on TWC and GPF performance, the research team evaluates gaseous and particulate emissions as well as back-pressure increase with ash loading by using an engine-oil injection system to accelerate ash loading in TWC-coated GPFs.

Prevented Mortality and Greenhouse Gas Emissions From Historical and Projected Nuclear Power

Science.gov (United States)

Kharecha, Pushker A.; Hansen, James E.

2013-01-01

In the aftermath of the March 2011 accident at Japan's Fukushima Daiichi nuclear power plant, the future contribution of nuclear power to the global energy supply has become somewhat uncertain. Because nuclear power is an abundant, low-carbon source of base-load power, it could make a large contribution to mitigation of global climate change and air pollution. Using historical production data, we calculate that global nuclear power has prevented an average of 1.84 million air pollution-related deaths and 64 gigatonnes of CO2-equivalent (GtCO2-eq) greenhouse gas (GHG) emissions that would have resulted from fossil fuel burning. On the basis of global projection data that take into account the effects of the Fukushima accident, we find that nuclear power could additionally prevent an average of 420 000-7.04 million deaths and 80-240 GtCO2-eq emissions due to fossil fuels by midcentury, depending on which fuel it replaces. By contrast, we assess that large-scale expansion of unconstrained natural gas use would not mitigate the climate problem and would cause far more deaths than expansion of nuclear power.

A conceptual framework for the evaluation of cost-effectiveness of projects to reduce GHG emissions and sequester carbon

International Nuclear Information System (INIS)

Sathaye, J.; Norgaard, R.; Makundi, W.

1993-07-01

This paper proposes a conceptual framework for evaluating the cost of projects to reduce atmospheric greenhouse gases (GHGs). The evaluation of cost-effectiveness should account for both the timing of carbon emissions and the damage caused by the atmospheric stock of carbon. We develop a conceptual basis to estimate the cost-effectiveness of projects in terms of the cost of reducing atmospheric carbon (CRAC) and other GHGs. CRAC accounts for the economic discount rate, alternative functional forms of the shadow price, the residence period of carbon in the atmosphere, and the multiple monetary benefits of projects. The last item is of particular importance to the developing countries

Denmark's greenhouse gas projections until 2012, an update including a preliminary projection until 2017

International Nuclear Information System (INIS)

Fenham, J.

2003-01-01

This report presents the results of a project financed by the Danish Energy Agency. The purpose of the project is to make 'with measures' projections of the emissions from Danish sources of the greenhouse gases, CO 2 , CH 4 , N 2 O, HFCs, PFCs and SF 6 . The 'with measures' projection encompasses currently implemented and adopted policies and measures. The time period covered is from 1972, the first year detailed Danish energy statistics were produced, until the first commitment period (2008-2012) under the Kyoto Protocol to the Climate Convention. A preliminary projection is also made for the second commitment period (2013-2017), but here no projections are available for the agricultural sector and the emissions from this sector has therefore been kept equal to the emissions in the first commitment period. Estimations of HFCs, PFCs and SF 6 -emissions and projections cover the period from 1993 until 2020. Only emissions caused by human activities are included in the calculations. However, it can sometimes be difficult to draw the borderline between emissions from nature and anthropogenic emissions. Due to small differences between the methodology used in this project and the methodology (CORINAIR) used by the National Environmental Research Institute for the purpose of annual reporting the estimated emissions presented for the period 1990-2000 may deviate from the official emission estimates report to the EU and the Climate Convention (UNFCCC). Therefore the GHG emission estimates presented in this report for the period until 2000 should only be seen as an illustration of the order of magnitude. This is also the case for the parts of the trend analyses, which are based on the historic data coming from this project. The description of the emissions in the report is structured according to the IPCC sectors: 1) Energy. 2) Industrial processes. 3) Agriculture. 4) Land use change and forestry. 5) Waste. The NMVOC emission from solvent use and other sources is included

Improving brain computer interface research through user involvement - The transformative potential of integrating civil society organisations in research projects

Science.gov (United States)

Wakunuma, Kutoma; Rainey, Stephen; Hansen, Christian

2017-01-01

Research on Brain Computer Interfaces (BCI) often aims to provide solutions for vulnerable populations, such as individuals with diseases, conditions or disabilities that keep them from using traditional interfaces. Such research thereby contributes to the public good. This contribution to the public good corresponds to a broader drive of research and funding policy that focuses on promoting beneficial societal impact. One way of achieving this is to engage with the public. In practical terms this can be done by integrating civil society organisations (CSOs) in research. The open question at the heart of this paper is whether and how such CSO integration can transform the research and contribute to the public good. To answer this question the paper describes five detailed qualitative case studies of research projects including CSOs. The paper finds that transformative impact of CSO integration is possible but by no means assured. It provides recommendations on how transformative impact can be promoted. PMID:28207882

Improving brain computer interface research through user involvement - The transformative potential of integrating civil society organisations in research projects.

Science.gov (United States)

Stahl, Bernd Carsten; Wakunuma, Kutoma; Rainey, Stephen; Hansen, Christian

2017-01-01

Research on Brain Computer Interfaces (BCI) often aims to provide solutions for vulnerable populations, such as individuals with diseases, conditions or disabilities that keep them from using traditional interfaces. Such research thereby contributes to the public good. This contribution to the public good corresponds to a broader drive of research and funding policy that focuses on promoting beneficial societal impact. One way of achieving this is to engage with the public. In practical terms this can be done by integrating civil society organisations (CSOs) in research. The open question at the heart of this paper is whether and how such CSO integration can transform the research and contribute to the public good. To answer this question the paper describes five detailed qualitative case studies of research projects including CSOs. The paper finds that transformative impact of CSO integration is possible but by no means assured. It provides recommendations on how transformative impact can be promoted.

Aircraft Emission Scenarios Projected in Year 2015 for the NASA Technology Concept Aircraft (TCA) High Speed Civil Transport

Science.gov (United States)

Baughcum, Steven L.; Henderson, Stephen C.

1998-01-01

This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from projected fleets of high speed civil transports (HSCTs) on a universal airline network. Inventories for 500 and 1000 HSCT fleets, as well as the concurrent subsonic fleets, were calculated. The HSCT scenarios are calculated using the NASA technology concept airplane (TCA) and update an earlier report. These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as NO2), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer pressure altitude grid and delivered to NASA as electronic files.

FTIR Emission spectroscopy of surfaces

Science.gov (United States)

Van Woerkom, P. C. M.

A number of vibrational spectroscopic techniques are available For the study of surfaces, such as ATR, IR reflection-absorption, IR emission, etc. Infrared emission is hardly used, although interesting applications are possible now due to the high sensitivity of Fourier transform IR (FTIR) spectrometers. Two examples, where infrared emission measurements are very fruitful, will be given. One is the investigation of the curing behaviour of organic coatings, the other is the in situ study of heterogeneously catalyzed reactions. Undoubtedly, infrared emission measurements offer a number of specific advantages in some cases. Especially the less critical demands on the sample preparation are important.

AUTOMATIC LOAD SHARING OF TRANSFORMERS USING MICROCONTROLLER

OpenAIRE

Vidhun M; Akshara Shanmughan; Liya Immanual; Sreelakshmi V G

2017-01-01

The transformer is a static device, which converts power from one level to another level. The aim of the project is to protect the transformer under overload condition by load sharing. Due to overload on transformer, the efficiency drops and windings get overheated and may get burnt. Thus by sharing load on transformer, the transformer is protected. This will be done by connecting another transformer in parallel through a micro-controller. The micro controller compares the load on the first t...

Wavelet transforms as solutions of partial differential equations

Energy Technology Data Exchange (ETDEWEB)

Zweig, G.

1997-10-01

This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Wavelet transforms are useful in representing transients whose time and frequency structure reflect the dynamics of an underlying physical system. Speech sound, pressure in turbulent fluid flow, or engine sound in automobiles are excellent candidates for wavelet analysis. This project focused on (1) methods for choosing the parent wavelet for a continuous wavelet transform in pattern recognition applications and (2) the more efficient computation of continuous wavelet transforms by understanding the relationship between discrete wavelet transforms and discretized continuous wavelet transforms. The most interesting result of this research is the finding that the generalized wave equation, on which the continuous wavelet transform is based, can be used to understand phenomena that relate to the process of hearing.

Implementing REDD+ (Reducing Emissions from Deforestation and Degradation): evidence on governance, evaluation and impacts from the REDD-ALERT project

NARCIS (Netherlands)

Matthews, R.B.; Noordwijk, van M.; Lambin, E.; Meyfroidt, P.; Gupta, J.; Verschot, L.; Hergoualc'h, K.; Veldkamp, E.

2014-01-01

Abstract The REDD-ALERT (Reducing Emissions from Deforestation and Degradation from Alternative Land Uses in the Rainforests of the Tropics) project started in 2009 and finished in 2012, and had the aim of evaluating mechanisms that translate international-level agreements into instruments that

Plasma Emission Profile Recreation using Soft X-Ray Tomography

Science.gov (United States)

Page, J. W.; Mauel, M. E.; Levesque, J. P.

2015-11-01

With sufficient views from multiple diode arrays, soft X-ray tomography is an invaluable plasma diagnostic because it is a non-perturbing method to reconstruct the emission within the interior of the plasma. In preparation for the installation of new SXR arrays in HBT-EP, we compute high-resolution tomographic reconstructions of discharges having kink-like structures that rotate nearly rigidly. By assuming a uniform angular mapping from the kink mode rotation, Δϕ ~ ωΔ t, a temporal sequence from a single 16-diode fan array represents as many as 16 x 100 independent views. We follow the procedure described by Wang and Granetz and use Bessel basis functions to take the inverse Radon transform. This transform is fit to our data using a least-squares method to estimate the internal SXR emissivity as a sum of polar functions. By varying different parameters of the transformation, we optimize the quality of our recreation of the emission profile and quantify how the reconstruction changes with the azimuthal order of the transform. Supported by U.S. DOE Grant DE-FG02-86ER53222.

Trace emissions from gaseous combustion

Energy Technology Data Exchange (ETDEWEB)

Seebold, J.G. [Chevron Research and Technology Co., Richmond, CA (United States)

2000-07-01

The U.S. Clean Air Act (CAA) was amended in 1990 to include the development of maximum achievable control technology (MACT) emission standards for hazardous air pollutants (HAPs) for certain stationary sources by November 2000. MACT emissions standards would affect process heaters and industrial boilers since combustion processes are a potential source for many air toxins. The author noted that one of the problems with MACT is the lack of a clear solid scientific footing which is needed to develop environmentally responsible regulations. In order to amend some of these deficiencies, a 4-year, $7 million research project on the origin and fate of trace emissions in the external combustion of gaseous hydrocarbons was undertaken in a collaborative effort between government, universities and industry. This collaborative project entitled the Petroleum Environmental Research Forum (PERF) Project 92-19 produced basic information and phenomenological understanding in two important areas, one basic and one applied. The specific objectives of the project were to measure emissions while operating different full-scale burners under various operating conditions and then to analyze the emission data to identify which operating conditions lead to low air toxic emissions. Another objective was to develop new chemical kinetic mechanisms and predictive models for the formation of air toxic species which would explain the origin and fate of these species in process heaters and industrial boilers. It was determined that a flame is a very effective reactor and that trace emissions from a typical gas-fired industry burner are very small. An unexpected finding was that trace emissions are not affected by hydrocarbon gaseous fuel composition, nor by the use of ultra low nitrous oxide burners. 2 refs., 8 figs.

Wigner distribution and fractional Fourier transform

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.

2001-01-01

The connection between the Wigner distribution and the squared modulus of the fractional Fourier transform - which are both well-known time-frequency representations of a signal - is established. In particular the Radon-Wigner transform is used, which relates projections of the Wigner distribution

Trace gas emissions from the production and use of domestic biofuels in Zambia measured by open-path Fourier transform infrared spectroscopy

Science.gov (United States)

Bertschi, Isaac T.; Yokelson, Robert J.; Ward, Darold E.; Christian, Ted J.; Hao, Wei Min

2003-07-01

Domestic biomass fuels (biofuels) were recently estimated to be the second largest source of carbon emissions from global biomass burning. Wood and charcoal provide approximately 90% and 10% of domestic energy in tropical Africa. In September 2000, we used open-path Fourier transform infrared (OP-FTIR) spectroscopy to quantify 18 of the most abundant trace gases emitted by wood and charcoal cooking fires and an earthen charcoal-making kiln in Zambia. These are the first in situ measurements of an extensive suite of trace gases emitted by tropical biofuel burning. We report emission ratios (ER) and emission factors (EF) for (in order of abundance) carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), acetic acid (CH3COOH), methanol (CH3OH), formaldehyde (HCHO), ethene (C2H4), ammonia (NH3), acetylene (C2H2), nitric oxide (NO), ethane (C2H6), phenol (C6H5OH), propene (C3H6), formic acid (HCOOH), nitrogen dioxide (NO2), hydroxyacetaldehyde (HOCH2CHO), and furan (C4H4O). Compared to previous work, our emissions of organic acids and NH3 are 3-6.5 times larger. Another significant finding is that reactive oxygenated organic compounds account for 70-80% of the total nonmethane organic compounds (NMOC). For most compounds, the combined emissions from charcoal production and charcoal burning are larger than the emissions from wood fires by factors of 3-10 per unit mass of fuel burned and ˜2 per unit energy released. We estimate that Zambian savanna fires produce more annual CO2, HCOOH, and NOx than Zambian biofuel use by factors of 2.5, 1.7, and 5, respectively. However, biofuels contribute larger annual emissions of CH4, CH3OH, C2H2, CH3COOH, HCHO, and NH3 by factors of 5.1, 3.9, 2.7, 2.4, 2.2, and 2.0, respectively. Annual CO and C2H4 emissions are approximately equal from both sources. Coupling our data with recent estimates of global biofuel consumption implies that global biomass burning emissions for several compounds are significantly larger than previously

The Hestia Project: High Spatial Resolution Fossil Fuel Carbon Dioxide Emissions Quantification at Hourly Scale in Indianapolis, USA

Science.gov (United States)

Zhou, Y.; Gurney, K. R.

2009-12-01

city environmental managers and regional industry as they plan emission mitigation options and project future emission trends. The results obtained here will also be a useful comparison to atmospheric CO2 monitoring efforts from the top-down. Figure 1. Location of the study area, the building level and mobile CO2 emissions, and an enlarged example neighborhood

Implementing REDD+ (Reducing Emissions from Deforestation and Degradation): evidence on governance, evaluation and impacts from the REDD-ALERT project

NARCIS (Netherlands)

Mathews, R.B.; van Noordwijk, M.; Lambin, E.; Meyfroidt, P.; Gupta, J.; Verchot, L.; Hergoualc'h, K.; Veldkamp, E.

2014-01-01

The REDD-ALERT (Reducing Emissions from Deforestation and Degradation from Alternative Land Uses in the Rainforests of the Tropics) project started in 2009 and finished in 2012, and had the aim of evaluating mechanisms that translate international-level agreements into instruments that would help

DYNAMICS MODEL OF MOISTURE IN PAPER INSULATION-TRANSFORMER OIL SYSTEM IN NON-STATIONARY THERMAL MODES OF THE POWER TRANSFORMER

Directory of Open Access Journals (Sweden)

V.V. Vasilevskij

2016-06-01

Full Text Available Introduction. An important problem in power transformers resource prognosis is the formation of moisture dynamics trends of transformer insulation. Purpose. Increasing the accuracy of power transformer insulation resource assessment based on accounting of moisture dynamics in interrelation with temperature dynamics. Working out of moisture dynamics model in paper insulation-transformer oil system in conjunction with thermodynamic model, load model and technical maintenance model. Methodology. The mathematical models used for describe the moisture dynamics are grounded on nonlinear differential equations. Interrelation moisture dynamics model with thermodynamic, load and technical maintenance models described by UML model. For confirming the adequacy of model used computer simulation. Results. We have implemented the model of moisture dynamics in power transformers insulation in interrelation with other models, which describe the state of power transformer in operation. The proposed model allows us to form detailed trends of moisture dynamics in power transformers insulation basing on monitoring data or power transformers operational factors simulation results. We have performed computer simulation of moisture exchange processes and calculation of transformer insulation resource for different moisture trends. Originality. The offered model takes into account moisture dynamics in power transformers insulation under the influence of changes of the power transformers thermal mode and operational factors. Practical value. The offered model can be used in power transformers monitoring systems for automation of resource assessment of oil-immersed power transformers paper insulation at different phase of lifecycle. Model also can be used for assessment of projected economic efficiency of power transformers exploitation in projected operating conditions.

Status of superconducting power transformer development

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.C.; McConnell, B.W.; Mehta, S.P. [and others

1996-03-01

Development of the superconducting transformer is arguably the most difficult of the ac power applications of superconductivity - this is because of the need for very low ac losses, adequate fault and surge performance, and the rigors of the application environment. This paper briefly summarizes the history of superconducting transformer projects, reviews the key issues for superconducting transformers, and examines the status of HTS transformer development. Both 630-kVA, three-phase and 1-MVA single phase demonstration units are expected to operate in late 1996. Both efforts will further progress toward the development of economical and performance competitive superconducting transformers.

On the contribution of labelled Certified Emission Reductions to sustainable development: A multi-criteria evaluation of CDM projects

International Nuclear Information System (INIS)

Nussbaumer, Patrick

2009-01-01

The Clean Development Mechanism (CDM) has a twofold objective, to offset greenhouse gas emissions and to contribute to sustainable development in the host country. The contribution to the latter objective seems marginal in most CDM activities. Also, CDM activities are unevenly spread among developing countries. In response to these concerns, initiatives with the objective of promoting CDM projects with broad local sustainable development dividends have been launched, such as the Gold Standard and the Community Development Carbon Fund. The Gold Standard label rewards best-practice CDM projects while the Community Development Carbon Fund focuses on promoting CDM activities in underprivileged communities. Using a multi-criteria method, the potential contribution to local sustainable development of those CDM projects with particular attributes is compared with ordinary ones. This evaluation suggests that labelled CDM activities tend to slightly outperform comparable projects, although not unequivocally

Reflexive project management in high-abition projects

NARCIS (Netherlands)

Loeber, Anne; Vermeulen, T.

2016-01-01

Purpose
The Aristotelian notion of phronèsis inspired innovative work in the realm of project management as well as in literature on sustainability and societal transformations. We argue that both literatures may benefit from a dialogue between the two, especially in view of outlining project

Denmark's greenhouse gas projections until 2012, an update including a preliminary projection until 2017

Energy Technology Data Exchange (ETDEWEB)

Fenham, J. [Risoe National Lab., Roskilde (Denmark)

2003-07-01

This report presents the results of a project financed by the Danish Energy Agency. The purpose of the project is to make 'with measures' projections of the emissions from Danish sources of the greenhouse gases, CO{sub 2}, CH{sub 4}, N{sub 2}O, HFCs, PFCs and SF{sub 6}. The 'with measures' projection encompasses currently implemented and adopted policies and measures. The time period covered is from 1972, the first year detailed Danish energy statistics were produced, until the first commitment period (2008-2012) under the Kyoto Protocol to the Climate Convention. A preliminary projection is also made for the second commitment period (2013-2017), but here no projections are available for the agricultural sector and the emissions from this sector has therefore been kept equal to the emissions in the first commitment period. Estimations of HFCs, PFCs and SF{sub 6}-emissions and projections cover the period from 1993 until 2020. Only emissions caused by human activities are included in the calculations. However, it can sometimes be difficult to draw the borderline between emissions from nature and anthropogenic emissions. Due to small differences between the methodology used in this project and the methodology (CORINAIR) used by the National Environmental Research Institute for the purpose of annual reporting the estimated emissions presented for the period 1990-2000 may deviate from the official emission estimates report to the EU and the Climate Convention (UNFCCC). Therefore the GHG emission estimates presented in this report for the period until 2000 should only be seen as an illustration of the order of magnitude. This is also the case for the parts of the trend analyses, which are based on the historic data coming from this project. The description of the emissions in the report is structured according to the IPCC sectors: 1) Energy. 2) Industrial processes. 3) Agriculture. 4) Land use change and forestry. 5) Waste. The NMVOC emission from

Chaos and dynamics on 0.5--300 ps time scales in vibrationally excited acetylene: Fourier transform of stimulated-emission pumping spectrum

International Nuclear Information System (INIS)

Pique, J.P.; Chen, Y.; Field, R.W.; Kinsey, J.L.

1987-01-01

A recently proposed technique based on the Fourier transform of the spectrum is applied to the stimulated-emission pumping spectrum of acetylene at --26 500 cm/sup -1/ above the vibrational ground state. Correlations on two different time scales (--3 and --45 ps) were found from analysis of low-resolution (0.3 cm/sup -1/) and high-resolution (0.05 cm/sup -1/) spectra, respectively. Additional structure produced dynamic information on a wider (0.5--300 ps) time scale. The results show that acetylene at 26 500 cm/sup -1/ is in the transition from the regular to the chaotic regime

Could a geological storage of the CO2 emissions from Romanian power plants become a joint implementation project?

International Nuclear Information System (INIS)

Matei, Magdalena; Ene, Simona; Necula, Catalina; Matei, Lucian; Marinescu, Mihai

2006-01-01

Full text: Emissions trading is a solution that is most compatible with deregulated electricity markets. The Directive 2003/87/CE referring to CO 2 emission trading within Europe entered into force and till 31 March 2004 all the countries had to present to the Commission their national plan to comply with Directive's rules. Recent predictions of the Intergovernmental Panel on Climate Change indicate that global warming will accelerate within this century. CO 2 emitted by the burning of fossil fuels is thought to be a main driving factor of climate change. With the potential to produce power without releasing CO 2 into the atmosphere, CO 2 capturing may become an important part of the post- Kyoto strategies of many countries. Underground storage of CO 2 seems to be one of the most attractive alternative. Potential targets for CO 2 injection are: - depleted oil reservoirs, possibly in combination with enhanced oil recovery - former gas fields, possibly with additional gas production - deep aquifers containing saline, non-drinkable water - deep and unminable coal seams (exchange of absorbed methane by CO 2 with simultaneous gas production) - geothermal wells, after heat extraction from the aquifers - residual volumes of former deep coal and salt mines. An environmental political decision about the option of CO 2 underground storage has to consider forecasts about developments of global climate, societies, and economics. Due to the forthcoming emission trading there is a growing interest in underground storage options for CO 2 in Europe now. Flexible mechanisms agreed by Kyoto Protocol, namely the Project-based Joint Implementation (Art. 6) and the Emission Trading (Art. 17) could help Romania to attract investment with a long term impact on emissions reduction. The brief identification of major CO 2 emissions sources and of possible CO 2 geological storage capacities (coal mines, aquifers, geothermal wells, oil and gas fields) shows that it is very probable to

Projections of Full-Fuel-Cycle Energy and Emissions Metrics

Energy Technology Data Exchange (ETDEWEB)

Coughlin, Katie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-01-01

To accurately represent how conservation and efficiency policies affect energy demand, both direct and indirect impacts need to be included in the accounting. The indirect impacts are defined here as the resource savings that accrue over the fuel production chain, which when added to the energy consumed at the point of use, constitute the full-fuel- cycle (FFC) energy. This paper uses the accounting framework developed in (Coughlin 2012) to calculate FFC energy metrics as time series for the period 2010-2040. The approach is extended to define FFC metrics for the emissions of greenhouse gases (GHGs) and other air-borne pollutants. The primary focus is the types of energy used in buildings and industrial processes, mainly natural gas and electricity. The analysis includes a discussion of the fuel production chain for coal, which is used extensively for electric power generation, and for diesel and fuel oil, which are used in mining, oil and gas operations, and fuel distribution. Estimates of the energy intensity parameters make use of data and projections from the Energy Information Agency’s National Energy Modeling System, with calculations based on information from the Annual Energy Outlook 2012.

Transformer ageing modern condition monitoring techniques and their interpretations

CERN Document Server

Purkait, Prithwiraj

2017-01-01

This book is a one-stop guide to state-of-the-art research in transformer ageing, condition monitoring and diagnosis. It is backed by rigorous research projects supported by the Australian Research Council in collaboration with several transmission and distribution companies. Many of the diagnostic techniques and tools developed in these projects have been applied by electricity utilities and would appeal to both researchers and practicing engineers. Important topics covered in this book include transformer insulation materials and their ageing behaviour, transformer condition monitoring techniques and detailed diagnostic techniques and their interpretation schemes. It also features a monitoring framework for smart transformers as well as a chapter on biodegradable oil.

Decomposing Air Pollutant Emissions in Asia: Determinants and Projections

OpenAIRE

Rafaj, P.; Amann, M.

2018-01-01

High levels of air pollution pose an urgent social and public health challenge in many Asian regions. This study evaluates the role of key factors that determined the changes in emission levels in China, India and Japan over the past 25 years. While emissions of air pollutants have been declining in Japan since the 1990s, China and India have experienced a rapid growth in pollution levels in recent years. Around 2005, control measures for sulfur emissions started to deliver expected reduction...

Modeling of pollutant emissions from road transport; Modelisation des emissions de polluants par le transport routier

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

COPERT III (computer programme to calculate emissions from road transport) is the third version of an MS Windows software programme aiming at the calculation of air pollutant emissions from road transport. COPERT estimates emissions of all regulated air pollutants (CO, NO{sub x}, VOC, PM) produced by different vehicle categories as well as CO{sub 2} emissions on the basis of fuel consumption. This research seminar was organized by the French agency of environment and energy mastery (Ademe) around the following topics: the uncertainties and sensitiveness analysis of the COPERT III model, the presentation of case studies that use COPERT III for the estimation of road transport emissions, and the future of the modeling of road transport emissions: from COPERT III to ARTEMIS (assessment and reliability of transport emission models and inventory systems). This document is a compilation of 8 contributions to this seminar and dealing with: the uncertainty and sensitiveness analysis of the COPERT III model; the road mode emissions of the ESCOMPTE program: sensitivity study; the sensitivity analysis of the spatialized traffic at the time-aggregation level: application in the framework of the INTERREG project (Alsace); the road transport aspect of the regional air quality plan of Bourgogne region: exhaustive consideration of the road network; intercomparison of tools and methods for the inventory of emissions of road transport origin; evolution of the French park of vehicles by 2025: new projections; application of COPERT III to the French context: a new version of IMPACT-ADEME; the European ARTEMIS project: new structural considerations for the modeling of road transport emissions. (J.S.)

Guidance document to the BC emission offsets regulation

International Nuclear Information System (INIS)

2010-11-01

British Columbia's (BC) emission offset regulations were established under the Greenhouse Gas Reduction Targets Act passed in 2007. Targets for greenhouse gas (GHG) emission reductions included a 6 percent reduction by 2012; an 18 percent reduction by 2016; a 33 percent reduction by 2020; and an 80 percent reduction by 2050. Carbon neutral agreements began in 2008, and covered emissions produced from government business travel and by provincial government ministries and agencies. This report presented a list of key recommendations developed by the Pacific Carbon Trust for use in future carbon offset projects. Recommendations included the use of correct emission factors when quantifying projected emission reductions from an offset project; the use of a robust data management system; and the use of evidence in supporting additionality arguments. The document outlined planning procedures for project baseline selection processes, protocol selections, and the identification of sources sinks and reservoirs. Issues related to quantification and measurements, emissions factors, and accuracy and uncertainty were also addressed. Validation, verification, and contracting options were also presented. 6 tabs., 3 figs.

Modeling Global Biogenic Emission of Isoprene: Exploration of Model Drivers

Science.gov (United States)

Alexander, Susan E.; Potter, Christopher S.; Coughlan, Joseph C.; Klooster, Steven A.; Lerdau, Manuel T.; Chatfield, Robert B.; Peterson, David L. (Technical Monitor)

1996-01-01

Vegetation provides the major source of isoprene emission to the atmosphere. We present a modeling approach to estimate global biogenic isoprene emission. The isoprene flux model is linked to a process-based computer simulation model of biogenic trace-gas fluxes that operates on scales that link regional and global data sets and ecosystem nutrient transformations Isoprene emission estimates are determined from estimates of ecosystem specific biomass, emission factors, and algorithms based on light and temperature. Our approach differs from an existing modeling framework by including the process-based global model for terrestrial ecosystem production, satellite derived ecosystem classification, and isoprene emission measurements from a tropical deciduous forest. We explore the sensitivity of model estimates to input parameters. The resulting emission products from the global 1 degree x 1 degree coverage provided by the satellite datasets and the process model allow flux estimations across large spatial scales and enable direct linkage to atmospheric models of trace-gas transport and transformation.

An accurate projection algorithm for array processor based SPECT systems

International Nuclear Information System (INIS)

King, M.A.; Schwinger, R.B.; Cool, S.L.

1985-01-01

A data re-projection algorithm has been developed for use in single photon emission computed tomography (SPECT) on an array processor based computer system. The algorithm makes use of an accurate representation of pixel activity (uniform square pixel model of intensity distribution), and is rapidly performed due to the efficient handling of an array based algorithm and the Fast Fourier Transform (FFT) on parallel processing hardware. The algorithm consists of using a pixel driven nearest neighbour projection operation to an array of subdivided projection bins. This result is then convolved with the projected uniform square pixel distribution before being compressed to original bin size. This distribution varies with projection angle and is explicitly calculated. The FFT combined with a frequency space multiplication is used instead of a spatial convolution for more rapid execution. The new algorithm was tested against other commonly used projection algorithms by comparing the accuracy of projections of a simulated transverse section of the abdomen against analytically determined projections of that transverse section. The new algorithm was found to yield comparable or better standard error and yet result in easier and more efficient implementation on parallel hardware. Applications of the algorithm include iterative reconstruction and attenuation correction schemes and evaluation of regions of interest in dynamic and gated SPECT

Transformation on Abandonment

DEFF Research Database (Denmark)

Krag, Mo Michelsen Stochholm

2017-01-01

in an attempt to sway the residents’ attitude towards a more nuanced view on ruins, thus influencing the public discourse on rural transformation. The residents’ responses are considered a significant impact indicator, supplementary to the physical transformations themselves. As such, the responses of the local...... in the process of provoking an exchange of memories of buildings and places among the residents in rural villages. Today’s state authorized funds for demolition projects, if redirected, could easily contribute to the on-going rural transformation through integration into radical preservation strategies. Instead......-practice indicates that this anxiety may not be legitimate. Time, when stretched in a ruination process or prolonged demolition, acts similarly to a mourning process, thus creating an exchange of memories of what is lost....

Identification of a Methane Oxidation Intermediate on Solid Oxide Fuel Cell Anode Surfaces with Fourier Transform Infrared Emission.

Science.gov (United States)

Pomfret, Michael B; Steinhurst, Daniel A; Owrutsky, Jeffrey C

2013-04-18

Fuel interactions on solid oxide fuel cell (SOFC) anodes are studied with in situ Fourier transform infrared emission spectroscopy (FTIRES). SOFCs are operated at 800 °C with CH4 as a representative hydrocarbon fuel. IR signatures of gas-phase oxidation products, CO2(g) and CO(g), are observed while cells are under load. A broad feature at 2295 cm(-1) is assigned to CO2 adsorbed on Ni as a CH4 oxidation intermediate during cell operation and while carbon deposits are electrochemically oxidized after CH4 operation. Electrochemical control provides confirmation of the assignment of adsorbed CO2. FTIRES has been demonstrated as a viable technique for the identification of fuel oxidation intermediates and products in working SOFCs, allowing for the elucidation of the mechanisms of fuel chemistry.

NitroScape: A model to integrate nitrogen transfers and transformations in rural landscapes

Energy Technology Data Exchange (ETDEWEB)

Duretz, S. [INRA-AgroParisTech, UMR 1091 Environnement et Grandes Cultures (EGC), 78850 Thiverval-Grignon (France); Drouet, J.L., E-mail: Jean-Louis.Drouet@grignon.inra.fr [INRA-AgroParisTech, UMR 1091 Environnement et Grandes Cultures (EGC), 78850 Thiverval-Grignon (France); Durand, P. [INRA-AgroCampus, UMR 1069 Sol Agro et hydrosysteme Spatialisation (SAS), 35042 Rennes cedex (France); Hutchings, N.J. [Department of Agroecology, Faculty of Agricultural Sciences, University of Aarhus (AU), Blichers Alle, 8830 Tjele (Denmark); Theobald, M.R. [Department of Chemistry and Agricultural Analysis, Technical University of Madrid (UPM), 28040 Madrid (Spain); Centre for Ecology and Hydrology (CEH), Bush Estate, Penicuik, Midlothian EH26 0QB (United Kingdom); Salmon-Monviola, J. [INRA-AgroCampus, UMR 1069 Sol Agro et hydrosysteme Spatialisation (SAS), 35042 Rennes cedex (France); Dragosits, U. [Centre for Ecology and Hydrology (CEH), Bush Estate, Penicuik, Midlothian EH26 0QB (United Kingdom); Maury, O. [INRA-AgroParisTech, UMR 1091 Environnement et Grandes Cultures (EGC), 78850 Thiverval-Grignon (France); Sutton, M.A. [Centre for Ecology and Hydrology (CEH), Bush Estate, Penicuik, Midlothian EH26 0QB (United Kingdom); Cellier, P. [INRA-AgroParisTech, UMR 1091 Environnement et Grandes Cultures (EGC), 78850 Thiverval-Grignon (France)

2011-11-15

Modelling nitrogen transfer and transformation at the landscape scale is relevant to estimate the mobility of the reactive forms of nitrogen (N{sub r}) and the associated threats to the environment. Here we describe the development of a spatially and temporally explicit model to integrate N{sub r} transfer and transformation at the landscape scale. The model couples four existing models, to simulate atmospheric, farm, agro-ecosystem and hydrological N{sub r} fluxes and transformations within a landscape. Simulations were carried out on a theoretical landscape consisting of pig-crop farms interspersed with unmanaged ecosystems. Simulation results illustrated the effect of spatial interactions between landscape elements on N{sub r} fluxes and losses to the environment. More than 10% of the total N{sub 2}O emissions were due to indirect emissions. The nitrogen budgets and transformations of the unmanaged ecosystems varied considerably, depending on their location within the landscape. The model represents a new tool for assessing the effect of changes in landscape structure on N{sub r} fluxes. - Highlights: > The landscape scale is relevant to study how spatial interactions affect N{sub r} fate. > The NitroScape model integrates N{sub r} transfer and transformation at landscape scale. > NitroScape couples existing atmospheric, farm, agro-ecosystem and hydrological models. > Data exchanges within NitroScape are dynamic and spatially distributed. > More than 10% of the simulated N{sub 2}O emissions are due to indirect emissions. - A model integrating terrestrial, hydrological and atmospheric processes of N{sub r} transfer and transformation at the landscape scale has been developed to simulate the effect of spatial interactions between landscape elements on N{sub r} fate.

NitroScape: A model to integrate nitrogen transfers and transformations in rural landscapes

International Nuclear Information System (INIS)

Duretz, S.; Drouet, J.L.; Durand, P.; Hutchings, N.J.; Theobald, M.R.; Salmon-Monviola, J.; Dragosits, U.; Maury, O.; Sutton, M.A.; Cellier, P.

2011-01-01

Modelling nitrogen transfer and transformation at the landscape scale is relevant to estimate the mobility of the reactive forms of nitrogen (N r ) and the associated threats to the environment. Here we describe the development of a spatially and temporally explicit model to integrate N r transfer and transformation at the landscape scale. The model couples four existing models, to simulate atmospheric, farm, agro-ecosystem and hydrological N r fluxes and transformations within a landscape. Simulations were carried out on a theoretical landscape consisting of pig-crop farms interspersed with unmanaged ecosystems. Simulation results illustrated the effect of spatial interactions between landscape elements on N r fluxes and losses to the environment. More than 10% of the total N 2 O emissions were due to indirect emissions. The nitrogen budgets and transformations of the unmanaged ecosystems varied considerably, depending on their location within the landscape. The model represents a new tool for assessing the effect of changes in landscape structure on N r fluxes. - Highlights: → The landscape scale is relevant to study how spatial interactions affect N r fate. → The NitroScape model integrates N r transfer and transformation at landscape scale. → NitroScape couples existing atmospheric, farm, agro-ecosystem and hydrological models. → Data exchanges within NitroScape are dynamic and spatially distributed. → More than 10% of the simulated N 2 O emissions are due to indirect emissions. - A model integrating terrestrial, hydrological and atmospheric processes of N r transfer and transformation at the landscape scale has been developed to simulate the effect of spatial interactions between landscape elements on N r fate.

Learning for transformation of water governance

NARCIS (Netherlands)

Blackmore, Chris; Bommel, van Severine; Bruin, de Annemarieke; Vries, de Jasper; Westberg, Lotten; Powell, Neil; Foster, Natalie; Collins, Kevin; Roggero, Pier Paolo; Seddaiu, Giovanna

2016-01-01

This paper considers how learning for transformation of water governance in the context of climate change adaptation can be designed for and supported, drawing examples from the international climate change adaptation and water governance project (CADWAGO). The project explicitly set out to design

Projective interpretation of some doubly special relativity theories

International Nuclear Information System (INIS)

Jafari, N.; Shariati, A.

2011-01-01

A class of projective actions of the orthogonal group on the projective space is being studied. It is shown that the Fock-Lorentz and Magueijo-Smolin transformations known as doubly special relativity are such transformations. The formalism easily leads to new types of transformations.

The land-use projections and resulting emissions in the IPCC SRES scenarios as simulated by the IMAGE 2.2 model

International Nuclear Information System (INIS)

Strengers, B.; Eickhout, B.; De Vries, B.; Bouwman, L.; Leemans, R.

2005-01-01

The Intergovernmental Panel on Climate Change (IPCC) developed a new series of emission scenarios (SRES). Six global models were used to develop SRES but most focused primarily on energy and industry related emissions. Land-use emissions were only covered by three models, where IMAGE included the most detailed, spatially explicit description of global land-use and land-cover dynamics. To complement their calculations the other models used land-use emission from AIM and IMAGE, leading to inconsistent estimates. Representation of the land-use emissions in SRES is therefore poor. This paper presents details on the IMAGE 2.1 land-use results to complement the SRES report. The IMAGE SRES scenarios are based on the original IPCC SRES assumptions and narratives using the latest version of IMAGE (IMAGE 2.2). IMAGE provides comprehensive emission estimates because not only emissions are addressed but also the resulting atmospheric concentrations, climate change and impacts. Additionally, in SRES the scenario assumptions were only presented and quantified for 4 'macro-regions'. The IMAGE 2.2 SRES implementation has been extended towards 17 regions. We focus on land-use aspects and show that land-related emissions not only depend on population projections but also on the temporal and spatial dynamics of different land-related sources and sinks of greenhouse gases. We also illustrate the importance of systemic feed backs and interactions in the climate system that influence land-use emissions, such as deforestation and forest regrowth, soil respiration and CO2-fertilisation

Revised emission factors for gas engines including start/stop emissions

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Malene; Boll Illerup, J.; Birr-Petersen, K.

2008-06-15

Liberalisation of the electricity market has led to Danish gas engine plants increasingly converting to the spot and regulating power markets. In order to offer regulating power, plants need to be able to start and stop the engines at the plants quickly. The liberalisation causes a considerable change of operation practice of the engines e.g. less full load operation hours /year. The project provides an inventory determining the scale of the emissions during the start and stop sequence as well as proposals for engine modifications aimed at reducing start/stop emissions. This report includes calculation of emission factors as well as an inventory of total emissions and reduction potentials. (au)

Deterritorializing Drawing - transformation/deformation

DEFF Research Database (Denmark)

Brabrand, Helle

2012-01-01

but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... the body, situated in real time and depth, with drawing transforming and deforming time and depth....

SPECIFICITY OF THE PROJECTIVE FIELD: REVERIES AND TRANSFORMATIVE POTENTIALITIES

OpenAIRE

Tiziana Sola

2014-01-01

This article suggests a reading of the projectives Methods in Bionian key, with particular reference to the bionian elaboration by Antonino Ferro, who substantially considers the patient’s associative flows as forms of the oneiric. The projective situation also represents a place of induction to reverie, in resonance with the concept of projective field, the peculiarity of which lie in the introduction of the element “third”, i.e. the test material.Keywords: Projective methods - Projective fi...

Geometric Transformations in Engineering Geometry

Directory of Open Access Journals (Sweden)

I. F. Borovikov

2015-01-01

Full Text Available Recently, for business purposes, in view of current trends and world experience in training engineers, research and faculty staff there has been a need to transform traditional courses of descriptive geometry into the course of engineering geometry in which the geometrical transformations have to become its main section. On the basis of critical analysis the paper gives suggestions to improve a presentation technique of this section both in the classroom and in academic literature, extend an application scope of geometrical transformations to solve the position and metric tasks and simulation of surfaces, as well as to design complex engineering configurations, which meet a number of pre-specified conditions.The article offers to make a number of considerable amendments to the terms and definitions used in the existing courses of descriptive geometry. It draws some conclusions and makes the appropriate proposals on feasibility of coordination in teaching the movement transformation in the courses of analytical and descriptive geometry. This will provide interdisciplinary team teaching and allow students to be convinced that a combination of analytical and graphic ways to solve geometric tasks is useful and reasonable.The traditional sections of learning courses need to be added with a theory of projective and bi-rational transformations. In terms of application simplicity and convenience it is enough to consider the central transformations when solving the applied tasks. These transformations contain a beam of sub-invariant (low-invariant straight lines on which the invariant curve induces non-involution and involution projectivities. The expediency of nonlinear transformations application is shown in the article by a specific example of geometric modeling of the interfacing surface "spar-blade".Implementation of these suggestions will contribute to a real transformation of a traditional course of descriptive geometry to the engineering geometry

Partial Discharge Monitoring in Power Transformers Using Low-Cost Piezoelectric Sensors.

Science.gov (United States)

Castro, Bruno; Clerice, Guilherme; Ramos, Caio; Andreoli, André; Baptista, Fabricio; Campos, Fernando; Ulson, José

2016-08-10

Power transformers are crucial in an electric power system. Failures in transformers can affect the quality and cause interruptions in the power supply. Partial discharges are a phenomenon that can cause failures in the transformers if not properly monitored. Typically, the monitoring requires high-cost corrective maintenance or even interruptions of the power system. Therefore, the development of online non-invasive monitoring systems to detect partial discharges in power transformers has great relevance since it can reduce significant maintenance costs. Although commercial acoustic emission sensors have been used to monitor partial discharges in power transformers, they still represent a significant cost. In order to overcome this drawback, this paper presents a study of the feasibility of low-cost piezoelectric sensors to identify partial discharges in mineral insulating oil of power transformers. The analysis of the feasibility of the proposed low-cost sensor is performed by its comparison with a commercial acoustic emission sensor commonly used to detect partial discharges. The comparison between the responses in the time and frequency domain of both sensors was carried out and the experimental results indicate that the proposed piezoelectric sensors have great potential in the detection of acoustic waves generated by partial discharges in insulation oil, contributing for the popularization of this noninvasive technique.

Partial Discharge Monitoring in Power Transformers Using Low-Cost Piezoelectric Sensors

Directory of Open Access Journals (Sweden)

Bruno Castro

2016-08-01

Full Text Available Power transformers are crucial in an electric power system. Failures in transformers can affect the quality and cause interruptions in the power supply. Partial discharges are a phenomenon that can cause failures in the transformers if not properly monitored. Typically, the monitoring requires high-cost corrective maintenance or even interruptions of the power system. Therefore, the development of online non-invasive monitoring systems to detect partial discharges in power transformers has great relevance since it can reduce significant maintenance costs. Although commercial acoustic emission sensors have been used to monitor partial discharges in power transformers, they still represent a significant cost. In order to overcome this drawback, this paper presents a study of the feasibility of low-cost piezoelectric sensors to identify partial discharges in mineral insulating oil of power transformers. The analysis of the feasibility of the proposed low-cost sensor is performed by its comparison with a commercial acoustic emission sensor commonly used to detect partial discharges. The comparison between the responses in the time and frequency domain of both sensors was carried out and the experimental results indicate that the proposed piezoelectric sensors have great potential in the detection of acoustic waves generated by partial discharges in insulation oil, contributing for the popularization of this noninvasive technique.

Market analysis and risk management of EU emissions trading

International Nuclear Information System (INIS)

Ollikainen, M.; Ollikka, K.; Aatola, P.; Ahonen, H.M.; Pohjola, T.; Kumpulainen, A.; Lappalainen, E.

2006-01-01

The first EU emissions trading period commenced on 1 January 2005. It implies new challenges to companies included in the scheme. A central challenge is the uncertainty related to the markets. In order to manage risks and profitability companies need to be able to estimate future price developments of emission allowances. University of Helsinki is conducting a research project in cooperation with Helsinki University of Technology that will provide necessary information for analyzing emission allowance markets and create risk management competence. The objectives of the research project are 1) to develop a price estimation model for EU emission allowances and 2) to develop risk management competence related to EU emission allowances. With the price estimation model the short-term price developments of EU emission allowances can be estimated. By utilizing the model companies can reduce uncertainties related to the markets. The project will also deliver a general risk management model for emission allowances that aims at improving competitiveness of companies. (orig.)

SPECIFICITY OF THE PROJECTIVE FIELD: REVERIES AND TRANSFORMATIVE POTENTIALITIES

Directory of Open Access Journals (Sweden)

Tiziana Sola

2014-01-01

Full Text Available This article suggests a reading of the projectives Methods in Bionian key, with particular reference to the bionian elaboration by Antonino Ferro, who substantially considers the patient’s associative flows as forms of the oneiric. The projective situation also represents a place of induction to reverie, in resonance with the concept of projective field, the peculiarity of which lie in the introduction of the element “third”, i.e. the test material.Keywords: Projective methods - Projective field – induction to reverie – activity of symbolization

Transformation of industrial territories

Science.gov (United States)

Plotnikova, N. I.; Kolocova, I. I.

2017-08-01

The problem of removing industrial enterprises from the historical center of the city and the subsequent effective use of the territories has been relevant for Western countries. Nowadays, the problem is crucial for Russia, its megacities and regional centers. The paper analyzes successful projects of transforming industrial facilities into cultural, business and residential objects in the world and in Russia. The patterns of the project development have been determined and presented in the paper.

Application of tuned sound enclosures to transformers

International Nuclear Information System (INIS)

Allan, K.N.; Ellingson, E.F.

1992-09-01

The objective of this program was to reduce the noise emitted from power transformers by using a close-fitting, integrally-mounted noise shell. The noise shell consists of a series of panels mounted to a framework, that is, in turn, supported by the tank by means of mounting brackets and neoprene isolators. The development work was directed specifically toward application to existing transformers, i.e. retrofit.This project is a follow-on to work done under project RP-579-1. That project developed the theory and applied it experimentally to an existing transformer. The results were somewhat disappointing, however, with an 8 dBA reduction achieved where 15 dBA was expected. This document reports the work performed covering the period from March 1, 1977, to December 31, 1978. A complete noise shell enclosure was installed on a transformer for Consumers Power Company (Jackson, Michigan). Costs projected on the basis of this installation and several business assumptions indicate an installed cost of 19.8% of a new, standard noise transformer. This is higher than originally expected, but lower than alternative noise control methods. It also has some features that should make it an even more attractive alternative. Material loss factor (generally termed damping) of the enclosure material was found to be a critical parameter. Addition of a damping treatment to the experimental shell increased the performance to the 15 dBA target reduction. Damping was also found to be critical on the demonstration unit. The plastic panels installed (loss factor 0.05) resulted in a noise reduction of 8.5 dBA, increasing to 11.6 dBA when acoustical foam was added inside the enclosure. Three panels were replaced with damped steel panels and an overall 16.5 dBA reduction is anticipated based on vibration measurements

Reference outlook for energy and emissions 2005-2020

International Nuclear Information System (INIS)

Van Dril, A.W.N.; Elzenga, H.E.

2005-05-01

The Reference Projection 2005-2020 covers the future development of Dutch energy use, greenhouse gas emissions and air pollution up to 2020. The Reference projection is based on assumptions regarding economic, structural, technological and policy developments. Two scenarios have been used. The Strong Europe (SE) scenario is characterized by moderate economic growth and strong public responsibility. The Global Economy (GE) scenario assumes high economic growth and has a strong orientation towards private responsibility. Energy consumption continues to grow in both scenarios and energy intensity is declining in the GE-scenario. Gradual rise of temperature is now included in the estimates for space heating and air conditioning. Energy prices for end users will rise, due to increased imports of natural gas and rising costs of electricity generation. The share of renewables in electricity consumption increases considerably due to subsidies for wind at sea and biomass, up to the target of 9% in 2010. Emissions of non-CO2 greenhouse gases are reduced and stabilise after 2010. The Dutch Kyoto target is probably met in both scenarios, assuming considerable emission reduction efforts abroad. Acidifying emissions of NOx and SO2 stabilise after reductions, but at levels that exceed their national emission ceiling (NEC). Emissions of volatile organic compounds are projected to fall with approximately 25% between 2002 and 2010 below their NEC. Emissions of ammonia are projected to meet their NEC. The emission of fine particles (PM10) will stabilise at present levels [nl

Inventories and scenarios of nitrous oxide emissions

International Nuclear Information System (INIS)

Davidson, Eric A; Kanter, David

2014-01-01

Effective mitigation for N 2 O emissions, now the third most important anthropogenic greenhouse gas and the largest remaining anthropogenic source of stratospheric ozone depleting substances, requires understanding of the sources and how they may increase this century. Here we update estimates and their uncertainties for current anthropogenic and natural N 2 O emissions and for emissions scenarios to 2050. Although major uncertainties remain, ‘bottom-up’ inventories and ‘top-down’ atmospheric modeling yield estimates that are in broad agreement. Global natural N 2 O emissions are most likely between 10 and 12 Tg N 2 O-N yr −1 . Net anthropogenic N 2 O emissions are now about 5.3 Tg N 2 O-N yr −1 . Gross anthropogenic emissions by sector are 66% from agriculture, 15% from energy and transport sectors, 11% from biomass burning, and 8% from other sources. A decrease in natural emissions from tropical soils due to deforestation reduces gross anthropogenic emissions by about 14%. Business-as-usual emission scenarios project almost a doubling of anthropogenic N 2 O emissions by 2050. In contrast, concerted mitigation scenarios project an average decline of 22% relative to 2005, which would lead to a near stabilization of atmospheric concentration of N 2 O at about 350 ppb. The impact of growing demand for biofuels on future projections of N 2 O emissions is highly uncertain; N 2 O emissions from second and third generation biofuels could remain trivial or could become the most significant source to date. It will not be possible to completely eliminate anthropogenic N 2 O emissions from agriculture, but better matching of crop N needs and N supply offers significant opportunities for emission reductions. (paper)

Dual-Emission SG7@MOF Sensor via SC-SC Transformation: Enhancing the Formation of Excimer Emission and the Range and Sensitivity of Detection.

Science.gov (United States)

Fu, Hong-Ru; Wu, Xiao-Xia; Ma, Lu-Fang; Wang, Fei; Zhang, Jian

2018-05-30

In this study, a water stable metal-organic framework FIR-53 is applied as a single-crystal container for anion exchange. The exceptional chemical stability and low crystallographic symmetry of FIR-53 makes it possible to determine anionic guests. Through ion exchange and single-crystal to single-crystal (SC-SC) transformation, 8-hydroxypyrene-1,3,6-trisulfonate (SG7, solvent green 7, ion form as SG7 3- ) is introduced into the pores of FIR-53 to obtain SG7@FIR-53. Because of the spatial confinement and partition effect, SG7@FIR-53 shows the bright exciter emission of SG7 ions. Interestingly, the composite SG7@FIR-53 exhibits a sensitive fluorescence quenching response against Cr 2 O 7 2- and MnO 4 - in aqueous solution. Especially, the detection limit toward MnO 4 - is as low as 0.12 ppb, which is the smallest value to date. Moreover, the prepared SG7@FIR-53 film also displays a broad response to nitro explosives in vapor/aqueous phase. Compared with the results of FIR-53, the range and sensitivity were greatly improved.

Projecting U.S. climate forcing and criteria pollutant emissions through 2050

Science.gov (United States)

Presentation highlighting a method for translating emission scenarios to model-ready emission inventories. The presentation highlights new features for spatially allocating emissions to counties and grid cells and identifies areas of potential improvement, such as updating tempor...

Hilbert transform and optical tomography for anisotropic edge enhancement of phase objects

International Nuclear Information System (INIS)

Montes-Perez, Areli; Meneses-Fabian, Cruz; Rodriguez-Zurita, Gustavo

2011-01-01

In phase object tomography a slice reconstruction is related to distribution of refractive index. Typically, this is obtained by applying the filtered back-projection algorithm to the set of projections (sinogram) obtained experimentally, which are sequentially obtained by calculating the phase of the wave emerging from the slice of the object at different angles. In this paper, based on optical implementation of the Hilbert-transform in a 4f Fourier operator, the Hilbert transform of the projections leaving of the object are obtained numerically. When these projection data are captured for a set of viewing angles an unconventional sinogram is eventually obtained, we have called it as an Hilbert-sinogram. The reconstruction obtained by applying the filtered back-projection algorithm is proportional to the Hilbert transform of the distribution of refractive index of the slice and the obtained image shows a typical isotropic edge enhancement. In this manuscript, the theoretical analysis and the numerical implementation of the Hilbert-transform, mathematical model of the edge enhancement reconstructed are extensively detailed.

Dynamic PET simulator via tomographic emission projection for kinetic modeling and parametric image studies.

Science.gov (United States)

Häggström, Ida; Beattie, Bradley J; Schmidtlein, C Ross

2016-06-01

To develop and evaluate a fast and simple tool called dpetstep (Dynamic PET Simulator of Tracers via Emission Projection), for dynamic PET simulations as an alternative to Monte Carlo (MC), useful for educational purposes and evaluation of the effects of the clinical environment, postprocessing choices, etc., on dynamic and parametric images. The tool was developed in matlab using both new and previously reported modules of petstep (PET Simulator of Tracers via Emission Projection). Time activity curves are generated for each voxel of the input parametric image, whereby effects of imaging system blurring, counting noise, scatters, randoms, and attenuation are simulated for each frame. Each frame is then reconstructed into images according to the user specified method, settings, and corrections. Reconstructed images were compared to MC data, and simple Gaussian noised time activity curves (GAUSS). dpetstep was 8000 times faster than MC. Dynamic images from dpetstep had a root mean square error that was within 4% on average of that of MC images, whereas the GAUSS images were within 11%. The average bias in dpetstep and MC images was the same, while GAUSS differed by 3% points. Noise profiles in dpetstep images conformed well to MC images, confirmed visually by scatter plot histograms, and statistically by tumor region of interest histogram comparisons that showed no significant differences (p dynamic PET and parametric images, and demonstrated that it generates both images and subsequent parametric images with very similar noise properties to those of MC images, in a fraction of the time. They believe dpetstep to be very useful for generating fast, simple, and realistic results, however since it uses simple scatter and random models it may not be suitable for studies investigating these phenomena. dpetstep can be downloaded free of cost from https://github.com/CRossSchmidtlein/dPETSTEP.

Use of a high density lead glass tubing projection chamber in positron emission tomography and in high energy physics

International Nuclear Information System (INIS)

Conti, M.; Guerra, A.D.; Habel, R.; Mulera, T.; Perez-Mendez, V.; Schwartz, G.

1985-10-01

We describe the principle of operation of a high density Projection Chamber, in which the converter/radiator and drift field shaping structures are combined in the form of high density (5 to 6 g/cm 3 ) lead glass tubing. The main applications of this type of detector to Medical Physics (Positron Emission Tomography) and High Energy Physics (Electromagnetic Calorimetry) are discussed

Transformative Creativity in the Expanded Digital Field

DEFF Research Database (Denmark)

Søndergaard, Morten

The idea that art may (can/will) transform ‘society’ is not a new one. Some would call it idealism - or an ideology, even – to have anything outside the market create transformation. But changes over the last decade, in the cultural constitution of the world’s global culture and economy, have......-practices like the Augmented Reality Project by the danish artgroup Boxiganga and the digital art/archive project MAP – Media Art Platform (Jacobsen og Søndergaard), which is using reactive media as a participatory strategy to map to a navigating audience the media art collection of The Museum of Contemporary...

International aviation emissions to 2025: Can emissions be stabilised without restricting demand?

International Nuclear Information System (INIS)

Macintosh, Andrew; Wallace, Lailey

2009-01-01

International aviation is growing rapidly, resulting in rising aviation greenhouse gas emissions. Concerns about the growth trajectory of the industry and emissions have led to calls for market measures such as emissions trading and carbon levies to be introduced to restrict demand and prompt innovation. This paper provides an overview of the science on aviation's contribution to climate change, analyses key trends in the industry since 1990, projects international civil aviation emissions to 2025 and analyses the emission intensity improvements that are necessary to offset rising international demand. The findings suggest international aviation carbon dioxide (CO 2 ) emissions will increase by more than 110 per cent between 2005 and 2025 (from 416 Mt to between 876 and 1013 Mt) and that it is unlikely emissions could be stabilised at levels consistent with risk averse climate targets without restricting demand

Special Operations Forces Language Transformation Strategy Needs Assessment Project: Final Project Report

Science.gov (United States)

2005-03-15

German (includes romance languages, etc.) CAT III/IV Language More difficult languages to acquire for native English speakers. Examples: Cantonese ...conversations on practical, social , and professional topics in my required AOR language. 52.9 62.1 51.9 51.9 52.0 SOF Language Transformation...67.6 85.7 77.2 67.5 71.9 73.1 63.6 67.6 63.0 I feel confident in my ability to participate in informal conversations on practical, social , and

Volatile organic compounds in alpine valleys: sources, evolutions and transformations; Les composes organiques volatils dans les vallees alpines: sources, evolutions et transformations

Energy Technology Data Exchange (ETDEWEB)

Colomb, A.

2002-12-01

Dynamic and chemical specificity in alpine valleys was the principal goal during the POVA project (Pollution des Vallees Alpines). Volatile Organic Compounds emissions in troposphere have important impacts on animal lives and environment. Then, the aim of this work was the improvement of the biogenic or anthropogenic VOC sources determination, of VOC transformation and evolution in mountain areas. During this project, the realisation of a daily continuous measurements campaign of a few chemical compounds allowed the understanding of the seasonal variations of these compounds. The goals of intensive field campaigns, realised in August 2000 and January 2001, were to understand photochemical process in a temporal and geographic small scale and to follow diurnal variation of different pollutants in summer and winter. Moreover, the VOC data would be used to develop and validate coupled atmospheric dynamic/chemical model. Therefore, these VOC measures give answer to two lacks of knowledge in alpine valleys about: - Biogenic and anthropogenic VOC respective part, and their main sources, - VOC photochemical reactions in alpine valleys, according to seasonal and diurnal cycles. Finally, we presented two atypical days results, in Maurienne valley during a Saharan episode in August 2000. This episode permitted to understand mass air transport mechanism in mountain region. (author)

OPIC Greenhouse Gas Emissions Analysis Details

Data.gov (United States)

Overseas Private Investment Corporation — Summary project inventory with independent analysis to quantify the greenhouse gas ("GHG") emissions directly attributable to projects to which the Overseas Private...

Fourier transform infrared spectra applications to chemical systems

CERN Document Server

Ferraro, John R

1978-01-01

Fourier Transform Infrared Spectroscopy: Applications to Chemical Systems presents the chemical applications of the Fourier transform interferometry (FT-IR).The book contains discussions on the applications of FT-IR in the fields of chromatography FT-IR, polymers and biological macromolecules, emission spectroscopy, matrix isolation, high-pressure interferometry, and far infrared interferometry. The final chapter is devoted to the presentation of the use of FT-IR in solving national technical problems such as air pollution, space exploration, and energy related subjects.Researc

Emissions of road transport

International Nuclear Information System (INIS)

Maekelae, K.; Tuominen, A.

2001-01-01

Information on the emissions and energy consumption of different vehicles per transported amount of goods has up to last years been minimal. The unit emissions mean the amount of harmful compounds in the flue gases of a vehicle per service, time or energy unit. National three-year MOBILE 2-research program, started in 1999, determines the unit emissions of all the traffic sectors in Finland. VTT Building and Transport mainly carry out the research, but the Institute of Transportation Engineering of the Tampere University of Technology (TTKK) is responsible for a part of the research. The objective of the project is to create common rules for the determination of unit emissions values, and to determine the best possible values for Finnish conditions. Unit emission data is mainly needed for evaluation of the environmental impacts of production plants and other activities containing transportation of commodities. At the web sites of VTT Building and Transport there are about 60 pages of text and tables (about 4000 values) on unit emissions. The URL of the pages is http://www.vtt.fi/rte/projects/lipastoe/index.htm. These web pages present data on all the transportation sectors (road, railroad, water and air transportation), most of the materials concerning road transportation. Following compounds and values are included: CO, HC, NO x , particulates, SO 2 , CO 2 and energy consumption. Methane and nitrous oxide emissions values have also been presented

Projection of greenhouse gases 2011-2035

Energy Technology Data Exchange (ETDEWEB)

Nielsen, O -K; Plejdrup, M S; Winther, M [and others

2013-02-15

This report contains a description of models, background data and projections of CO{sub 2}, CH{sub 4}, N{sub 2}O, HFCs, PFCs and SF{sub 6} for Denmark. The emissions are projected to 2035 using a scenario combined with the expected results of a few individual policy measures. Official Danish forecasts of activity rates are used in the models for those sectors for which forecasts are available, i.e. the latest official forecast from the Danish Energy Agency. The emission factors refer to international guidelines and some are country-specific and refer to Danish legislation, Danish research reports or calculations based on emission data from a considerable number of industrial plants. The projection models are based on the same structure and method as the Danish emission inventories in order to ensure consistency. (Author)

The Audience Wheel as a Technic to Create Transformative Learning

DEFF Research Database (Denmark)

Helth, Poula

2016-01-01

Purpose: The purpose of this chapter is to document how a new learning technic may create transformative learning in leadership in an organisational practice. Design/methodology/approach: The learning methods developed in the learning in practice (LIP) project include aesthetic performances...... combined with reflections. The intention has been to explore how leadership may be transformed, when leaders work as a collective of leaders. The learning methods developed and tested in the LIP project are art-informed learning methods, concepts of liminality and reflection processes carried out...... in the leaders’ organisational practice. Findings: One of the most important findings in the LIP project in relation to transformative learning is a new learning technique based on guided processes rooted in aesthetic performance combined with reflections and separation of roles as performer and audience...

Programmable thermal emissivity structures based on bioinspired self-shape materials

Science.gov (United States)

Athanasopoulos, N.; Siakavellas, N. J.

2015-12-01

Programmable thermal emissivity structures based on the bioinspired self-shape anisotropic materials were developed at macro-scale, and further studied theoretically at smaller scale. We study a novel concept, incorporating materials that are capable of transforming their shape via microstructural rearrangements under temperature stimuli, while avoiding the use of exotic shape memory materials or complex micro-mechanisms. Thus, programmed thermal emissivity behaviour of a surface is achievable. The self-shape structure reacts according to the temperature of the surrounding environment or the radiative heat flux. A surface which incorporates self-shape structures can be designed to quickly absorb radiative heat energy at low temperature levels, but is simultaneously capable of passively controlling its maximum temperature in order to prevent overheating. It resembles a “game” of colours, where two or more materials coexist with different values of thermal emissivity/ absorptivity/ reflectivity. The transformation of the structure conceals or reveals one of the materials, creating a surface with programmable - and therefore, variable- effective thermal emissivity. Variable thermal emissivity surfaces may be developed with a total hemispherical emissivity ratio (ɛEff_H/ɛEff_L) equal to 28.

Storytelling in Projects

DEFF Research Database (Denmark)

Munk-Madsen, Andreas; Andersen, Peter Bøgh

2006-01-01

project managers should not only be concerned with project plans, but also with project stories. In this paper we explore some basic principles for transforming project plans into appealing stories. We discuss what may happen to stories once they are released into public space. And we illustrate how......Plans and stories are two different ways of communicating about projects. Project plans are formalized descriptions, primarily supporting coordination. Project stories are accounts whose primary function is emotional appeal. Project stories influence the projects’ chances of success. Therefore...... the possibilities of telling favorable stories may have repercussions on the project planning....

The European Dioxin Emission Inventory. Stage II. Final report

Energy Technology Data Exchange (ETDEWEB)

Quass, U.; Fermann, M.; Broeker, G.

2001-07-01

For Stage II of the European Dioxin Project the following objectives were set: - Amendment of existing emission data collected for most relevant emission sources in order to reduce uncertainties of emission estimates. Collecting first emission data from countries not yet performing dioxin emission measurement programs. Extending the inventory of dioxin emissions to ambient air produced in Stage I by a complementary study on emissions to land and water. Extending the regional scope of data collection to countries in Central Europe. The report of Stage II of the European Dioxin Project is presented in 3 Volumes. Volume 1 contains an overview on the background and approach of different activities carried out and on the results obtained. These results are put into a broader view regarding the dioxin reduction measures in Europe leading to conclusions and recommendation for future work. Volume 2 of the report contains a detailed presentation of the sub-projects carried out. The chapters of Volume 2 are structured in a similar manner and start with a short summary in order to allow for a fast cross-reading. In the case of the desk-top studies an overview of the main results or statements is given. Regarding emission measurements details on the experimental set-up and the facilities being investigated are presented. Volume 3 contains a re-evaluation of the dioxin emission inventory presented for the most relevant sources types in the Stage I report. New data gathered from the projects of Stage II as well as from independent activities in the European countries are considered for a revision of the 1995 emission estimates. Additionally, based on current trends and activities the PCDD/F emissions for the years 2000 and 2005 are estimated. Finally, an attempt is made to evaluate the PCDD/F emission reduction rates which might be possible to achieve by the year 2005 compared to 1985. (orig.)

Transformation of myelodysplastic syndrome to acute myeloid leukemia: a case with whole-body 2- (18F) fluoro-2-deoxy-D-glucose positron emission tomography

International Nuclear Information System (INIS)

Liu, Fang; Cao, Qinghua

2011-01-01

The case reported here was that of an old woman characterized by pancytopenia, chromosome clonal abnormality, fluctuation of the percent of blast cells at 20%, and negative evidence of malignancy in whole-body 2-( 18 F) fluoro-2-deoxy-D-glucose positron emission tomography ( 18 F-FDG PET). After about 10 months, the blast cells accounted for about 25%, the morphology of which was similar to that of previous ones, and 18 F-FDG PET demonstrated diffusing increased uptake in the right upper leg and lymph nodes and patchy high uptake of bone marrow. 2-( 18 F)-fluoro-2-deoxyglucose can reflect extramedullary infiltration and bone marrow cellularity of the whole body, compared with invasive, regional biopsies and aspirations. The value of 2-( 18 F)-fluoro-2-deoxyglucose or 3'-deoxy-3'-( 18 F)-fluorothymidine positron emission tomography as an indicator in predicting the transformation of myelodysplastic syndrome to acute myeloid leukemia needs to be explored in the future. (author)

On probability-possibility transformations

Science.gov (United States)

Klir, George J.; Parviz, Behzad

1992-01-01

Several probability-possibility transformations are compared in terms of the closeness of preserving second-order properties. The comparison is based on experimental results obtained by computer simulation. Two second-order properties are involved in this study: noninteraction of two distributions and projections of a joint distribution.

Enteric methane emissions from German pigs

DEFF Research Database (Denmark)

Dämmgen, Ulrich; Schulz, Joachim; Klausing, Heinrich Kleine

2012-01-01

Methane emissions from enteric fermentation of pigs are object of emission reporting. Hitherto they were treated as part of the energy balance of pigs, in accordance with IPCC guidance documents. They were calculated from the gross energy intake rate and a constant methane conversion ratio....... Meanwhile numerous experimental data on methane emissions from enteric fermentation is available in Germany and abroad; the results are compiled in this work. These results also allow for a description of transformation processes in the hind gut and a subsequent establishment of models that relate emissions...... to feed and performance data. The model by Kirchgeßner et al. (1995) is based on German experimental data and reflects typical national diet compositions. It is used to quantify typical emissions and methane conversion ratios. The results agree with other experimental findings at home and abroad...

A Fourier transform method for Vsin i estimations under nonlinear Limb-Darkening laws

Energy Technology Data Exchange (ETDEWEB)

Levenhagen, R. S., E-mail: ronaldo.levenhagen@gmail.com [Universidade Federal de São Paulo, Depto. Ciências Exatas e da Terra, Rua Prof. Arthur Riedel, 275, Jd. Eldorado, CEP 09972-270 Diadema, SP (Brazil)

2014-12-10

Star rotation offers us a large horizon for the study of many important physical issues pertaining to stellar evolution. Currently, four methods are widely used to infer rotation velocities, namely those related to line width calibrations, on the fitting of synthetic spectra, interferometry, and on Fourier transforms (FTs) of line profiles. Almost all of the estimations of stellar projected rotation velocities using the Fourier method in the literature have been addressed with the use of linear limb-darkening (LD) approximations during the evaluation of rotation profiles and their cosine FTs, which in certain cases, lead to discrepant velocity estimates. In this work, we introduce new mathematical expressions of rotation profiles and their Fourier cosine transforms assuming three nonlinear LD laws—quadratic, square-root, and logarithmic—and study their applications with and without gravity-darkening (GD) and geometrical flattening (GF) effects. Through an analysis of He I models in the visible range accounting for both limb and GD, we find out that, for classical models without rotationally driven effects, all the Vsin i values are too close to each other. On the other hand, taking into account GD and GF, the Vsin i obtained with the linear law result in Vsin i values that are systematically smaller than those obtained with the other laws. As a rule of thumb, we apply these expressions to the FT method to evaluate the projected rotation velocity of the emission B-type star Achernar (α Eri).

Emission Data For Climate-Chemistry Interactions

Science.gov (United States)

Smith, S. J.

2012-12-01

Data on anthropogenic and natural emissions of reactive species are a critical input for studies of atmospheric chemistry and climate. The availability and characteristics of anthropogenic emissions data that can be used for such studies are reviewed and pathways for future work discuss Global and regional datasets for historical and future emissions are available, but their characteristics and applicability for specific studies differ. For the first time, a coordinated set of historical emissions (Lamarque et al 2010) and the future projections (van Vuurren et al. 2011) have been developed for use in the CMIP5 and ACCMIP long-term simulation comparison projects. These data have decadal resolution and were designed for long-term, global simulations. These data, however, lack finer-scale spatial and temporal detail that might be needed for some studies. Robust and timely updates of emissions data is generally lacking, although recent updates will be presented. While historical emission data is often treated as known, emissions are uncertain, even though this uncertainty is rarely quantified. Uncertainty varies by species and location. Inverse modeling is starting to indicate where emission data may be uncertain, which opens the way to improving these data overall. Further interaction between the chemistry modeling and inventory development communities are needed. Future projections are intrinsically uncertain, and while institutions and processes are in place to develop and review long-term century-scale scenarios, a need has remained for a wider range in shorter-term (e.g., several decade) projections. Emissions and scenario development communities have been working to fill this need. Communication across disciplines of the assumptions embedded in emissions projections remains a challenge. Atmospheric chemistry models are a central tool needed for studying chemistry-climate interactions. Simpler models, however, are also needed in order to examine interactions

Project mechanisms challenges

International Nuclear Information System (INIS)

Perthuis, Ch. de

2005-06-01

The project mechanism complete the quotas systems concerning the carbon dioxide emissions market. The author explains and discusses these mechanisms and provides a panorama of the existing and developing projects. More specially she brings information on the mechanism of clean developments and renewable energies, the coordinated mechanisms, the agricultural projects, the financing of the projects and the exchange systeme of the New south Wales. (A.L.B.)

The effect of urea fertiliser formulations on gross nitrogen transformations in a permanent grassland soil.

Science.gov (United States)

Harty, Mary; Mueller, Christoph; Laughlin, Ronnie; Watson, Catherine; Richards, Karl; Lanigan, Gary; Forrestal, Patrick; McGeough, Karen

2015-04-01

Introduction By 2050, the current food production rate will need to increase by 70 % in order to meet the needs of the projected world population (FAO, 2014). Under the climate change response bill, Ireland has a target to reduce GHG emissions by 20% by 2020. Agriculture was responsible for almost one third of Ireland's overall Greenhouse Gas (GHG) emissions in 2012, with 39% of these emissions arising from chemical/organic fertilisers in the form of nitrous oxide (N2O). N2O losses represent environmental damage through ozone depletion and global warming as well as acidification, eutrophication, surface and groundwater contamination and it also represents financial loss to the farmer (Cameron 2013). The contradictory aims of increasing food production while reducing GHG emissions will require an adjustment to the current system of agricultural production. As part of a larger study evaluating the switching of nitrogen (N) fertiliser formulation to minimise N2O emissions, (from calcium ammonium nitrate (CAN) to urea based formulations), this experiment examined the effect of urea based fertiliser formulations on gross N transformations in a permanent pasture soil at Hillsborough, Co. Down, Northern Ireland. Study Design/Methodology A laboratory incubation study was undertaken, to examine the effect of urea in various combinations with two types of inhibitors on soil N dynamics and N2O and N2 emissions. The inhibitors examined were the urease inhibitor N-(butyl) thiophosphoric triamide (nBTPT) and the nitrification inhibitor dicyandiamide (DCD). The fertiliser products were labelled with 15N and the soil was incubated at 15 ° C at a water filled pore space of 65%. Soil mineral N (urea, NH4+, NO2- and NO3-) concentrations, gaseous losses (N2O and N2) and the 15N enrichments of NH4+, NO2-, NO3-, N2O and N2were analysed on 8 separate occasions over 25 days. An adapted numerical 15N tracing model (Müller et al., 2007) was used to quantify the effect of the inhibitors on

Transforming distance education curricula through distributive leadership

Directory of Open Access Journals (Sweden)

Mike Keppell

2010-12-01

Full Text Available This paper examines a core leadership strategy for transforming learning and teaching in distance education through flexible and blended learning. It focuses on a project centred on distributive leadership that involves collaboration, shared purpose, responsibility and recognition of leadership irrespective of role or position within an organisation. Distributive leadership was a core principle in facilitating the transformation of learning and teaching through a Teaching Fellowship Scheme that empowered leaders across a regional distance education university. In parallel, a design-based research project analysed the perceptions of the Teaching Fellows in relation to blended learning, time/space, peer learning, innovation and equity issues in relation to distance education.

PENILAIAN KONDISI TRANSFORMATOR DAYA PADA PT.X

Directory of Open Access Journals (Sweden)

Badaruddin Badaruddin

2016-10-01

Full Text Available Transformator daya merupakan peralatan yang vital dalam penyaluran energi listrik dari unit pembangkit menuju sistem jaringan saluran tegangan. Kehandalan transformator daya sangat penting untuk keberhasilan operasi dari sistem tenaga listrik. Untuk itu dilakukan pendekatan sistematis dengan cara mengetahui kondisi peralatan komponen utama dari transformator daya tersebut. Transformator secara ideal memiliki useful life sesuai dengan design life yang direkomendasikan yaitu 30 tahun. Sedangkan transformator daya PT X sudah tidak berada dalam range useful life, dimana transformator daya tersebut diproduksi oleh Takaoka Electric pada tahun 1976. Oleh karena factor usia transformator yang sudah berumur maka diperlukan inspeksi khusus secara mendalamsebagai pendukung untuk membuat keputusan pembatasan operasi atau keputusan investasi pembangkit secara tepat dan tidak merugikan unit pembangkit itu sendiri. Untuk itu penulis melakukan serangkaian pengujian dan analisa penilaian kondisi transformator daya PT X untuk memperoleh nilai kondisi dengan mengacu  pada referensi penilaian HAP (Hydro Power Advancement Project. Hasil penilaian kondisi diharapkan nantinya akan digunakan sebagai bahan pendukung tindak lanjut pengambilan keputusan oleh PT. X.

Leadership and Project Success in Development Sector

Directory of Open Access Journals (Sweden)

Saghir Ahmed

2017-10-01

Full Text Available Aim/purpose - The study aims to investigate the relationship among the leadership, operational efficiency and project success in general and the impact of transformational leadership and operational efficiency on project success in particular. Design/methodology/approach - Mean comparison from descriptive statistics and multiple linear regression from inferential statistics was used to determine the association between variables and further impact of the transformational leadership and operational efficiency on project success in the development sector. The paper presents the results of a survey conducted among 200 employees from the top, middle & lower management levels of various national & international development organizations working in Pakistan like Microfinance Banks and other Rural Support Programs. Statistical Package for Social Sciences (SPSS was used to process data. Findings - The result shows positive association among transformational leadership, operational efficiency and project success. In addition, it was found that transformational leadership and operational efficiency have a positive and statistically significant impact on the project success. It is concluded that both transformational leadership and operational efficiency are vital to achieving the optimum level of success in any project, especially in the development sector. Research implications/limitations - The integral limitation of the study was the respondents because most of the development organizations have their operations in rural areas where access was difficult because of limited time and resources. In addition, such organizations are always reluctant to provide survey feedback. Originality/value/contribution - The paper contribution is in the theoretical and practical knowledge of the project success factors in the development sector which is still a somehow unexplored area. Regulators of the development sector may be benefited from this study.

The SPARDIG project - Transforming analogue sparker records from the Norwegian continental shelf into SEG-Y format, first results

Science.gov (United States)

Schaming, Marc; Rise, Leif; Chand, Shyam; Reidulv, Bøe; Terje Osmundsen, Per; Redfield, Tim

2017-04-01

A large number of sparker lines were acquired on the Norwegian continental shelf during the years 1970-1982, by IKU (Sintef Petroleum Research). The responsibility of the analogue seismic database was transferred to NGU in 1998; this included storage of the physical data (original paper rolls and half-scale film copies) and the digital navigation database. The data (from 60°N to 71°30N) were in the early eighties subdivided in 6 data packages, and offered for sale to oil companies as half scale folded paper copies (25 cm width). Navigation applied was mainly Decca Main Chain. The 2014-2016 SPARDIG project (Chand et al., 2016) was supported by NGU, AkerBP (Det Norske), Lundin Norway and the Seabed Project. In the project, IPGS has transformed 374 rolls of analogue sparker lines in 17 different surveys into SEG-Y format. The total length of converted survey lines is 31 261 kilometers. Rolls were scanned at 600 dpi and converted into SEG-Y using the SeisTrans (Caldera software) application (Miles et al., 2007). SeisTrans uses interactive, iterative and repeatable steps in a dedicated graphics window. A first step allows definition of axes and scales, then record time lines (horizontal TWT times and navigation time lines down the record) are picked and removed, and traces are defined. At this step, control tools are available to ensure the quality of the traces. After that, navigation information extracted and interpolated from excel files are added to trace headers. A continuous QC process allows production of SEG-Y files directly readable by interpretation software. The SEG-Y data will be delivered to the Norwegian Discos National Repository (https://portal.diskos.cgg.com/whereoil-data/) but access will be restricted to participants until 1st April 2019. IKU sparker lines have higher resolution than conventional 2D lines, but the penetration is limited. The data sets are complementary to each other. In 2D seismic lines, it is often difficult to delineate units in

Peatland-GHG emissions in Europe

Science.gov (United States)

Droesler, Matthias

2013-04-01

Managed peatlands are hot spots for CO2, CH4 and N2O emissions. GHG which have been not fully integrated in past European climate projects. Peatlands contribute to European GHG emissions 10 times more per unit area than other terrestrial ecosystems. Peatland management and exploration by drainage, agricultural use and peat extraction turned pristine peatland GHG sinks into sources. Emissions can reach more than 40 t CO2equiv. ha-1 a-1 in intensively managed peatlands. On the other hand, the restoration of degraded peatlands does normally reduce these emissions significantly towards climate neutral levels, once the restoration work is done wisely. But in some cases the net climate effect do not decrease significantly depending on hydrological regimes, fertilization status of the peatlands, climate and vegetation type. In many European countries with significant peatland cover nationally funded projects were set up to investigate peatland GHG fluxes and their drivers. These scattered data and knowledge are currently being brought together under the coverage of the GHG-Europe project (Grant agreement no.: 244122) within a new synthesis to develop the relevant EF, identify the drivers and develop upscaling options for GHG-emissions. The talk will: (1) show a first cut of new Emission Factors for peatlands in Europe and compare these with IPCC-default values. (2) discuss the developed sensible response functions for GHG-fluxes against natural and anthropogenic drivers such as land use intensity, land management with drainage and climate variability. (3) show case studies from Germany show the applicability of response functions for upscaling of GHG-balances. (4) An outlook is given to the future European peatland GHG-Balance.

Neutron star evolution and emission

Science.gov (United States)

Epstein, R. I.; Edwards, B. C.; Haines, T. J.

1997-01-01

This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The authors investigated the evolution and radiation characteristics of individual neutron stars and stellar systems. The work concentrated on phenomena where new techniques and observations are dramatically enlarging the understanding of stellar phenomena. Part of this project was a study of x-ray and gamma-ray emission from neutron stars and other compact objects. This effort included calculating the thermal x-ray emission from young neutron stars, deriving the radio and gamma-ray emission from active pulsars and modeling intense gamma-ray bursts in distant galaxies. They also measured periodic optical and infrared fluctuations from rotating neutron stars and search for high-energy TeV gamma rays from discrete celestial sources.

reflecting on socially transformative environmental literacy for lesotho

African Journals Online (AJOL)

project on education for environmental literacy within the integrated science curriculum in Lesotho. ... research project involving teachers and university ... Here we identify one orientation to or perspective on ... (Kincheloe & Steinberg, 1993); a post-modern per- spective ... The transformative potential of socially critical theo-.

NOx emissions trading: Precursor to future growth

International Nuclear Information System (INIS)

Colella, A.

1993-01-01

Title I of the Clean Air Act Amendments (CAAA) of 1990 specified the framework for enhanced regulation in ozone non-attainment areas with increasingly stringent requirements dependent on the area classification - marginal, moderate, serious, severe or extreme. Before the CAAA were passed, only volatile organic compounds (VOCs) were regulated as precursors to ozone formation, Now, by statute, emissions of nitrogen oxides (NO x ) are also regulated as ozone precursor. Under the CAAA, new sources and modifications of existing sources are subject to Title I permitting requirements in ozone non-attainment areas if emissions of NO x and/or VOCs exceed certain triggering levels. For many new or facility expansion projects, especially power generation, the NO x thresholds are easily exceeded thus triggering Title I non-attainment new source review which requires application of control technology to new equipment which results in the Lowest Achievable Emission Rate (LAER), and securing emission reductions either internally or from other major sources to offset the increased emission from the new or modified source. The selection of a LAER technology is generally within an applicant's control. An applicant can determine up-front the engineering and cost considerations associated with LAER technology is assessing a project's viability. However, without a clear source of emission offsets of a means to secure them, assessing project viability could be difficult if not impossible. No available emission offsets means no industrial growth. For sources of NO x undergoing Title I new source review, a regional or state banking system that facilitates NO x emissions trading is needed as a precursor to future growth. This paper presents an overview of EPA's Emissions Trading Policy and Title I new source review offset provisions. Industry's concerns about emissions trading and recommendations for future trading programs are presented

Map projections cartographic information systems

CERN Document Server

Grafarend, Erik W; Syffus, Rainer

2014-01-01

This book offers a timely review of map projections including sphere, ellipsoid, rotational surfaces, and geodetic datum transformations. Coverage includes computer vision, and remote sensing space projective mappings in photogrammetry.

Reaction dynamics of O({sup 1}D) + HCOOD/DCOOH investigated with time-resolved Fourier-transform infrared emission spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Huang, Shang-Chen; Putikam, Raghunath; Lin, M. C., E-mail: chemmcl@emory.edu, E-mail: tsuchis@sepia.plala.or.jp, E-mail: yplee@mail.nctu.edu.tw; Tsuchiya, Soji, E-mail: chemmcl@emory.edu, E-mail: tsuchis@sepia.plala.or.jp, E-mail: yplee@mail.nctu.edu.tw [Department of Applied Chemistry and Institute of Molecular Science, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Nghia, N. T. [School of Chemical Engineering - Hanoi University of Science and Technology, Hanoi (Viet Nam); Nguyen, Hue M. T. [Center for Computational Science and Faculty of Chemistry, Hanoi National University of Education, Hanoi (Viet Nam); Lee, Yuan-Pern, E-mail: chemmcl@emory.edu, E-mail: tsuchis@sepia.plala.or.jp, E-mail: yplee@mail.nctu.edu.tw [Department of Applied Chemistry and Institute of Molecular Science, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 10617, Taiwan (China)

2014-10-21

We investigated the reaction dynamics of O({sup 1}D) towards hydrogen atoms of two types in HCOOH. The reaction was initiated on irradiation of a flowing mixture of O{sub 3} and HCOOD or DCOOH at 248 nm. The relative vibration-rotational populations of OH and OD (1 ≦ v ≦ 4, J ≤ 15) states were determined from time-resolved IR emission recorded with a step-scan Fourier-transform spectrometer. In the reaction of O({sup 1}D) + HCOOD, the rotational distribution of product OH is nearly Boltzmann, whereas that of OD is bimodal. The product ratio [OH]/[OD] is 0.16 ± 0.05. In the reaction of O({sup 1}D) + DCOOH, the rotational distribution of product OH is bimodal, but the observed OD lines are too weak to provide reliable intensities. The three observed OH/OD channels agree with three major channels of production predicted with quantum-chemical calculations. In the case of O({sup 1}D) + HCOOD, two intermediates HOC(O)OD and HC(O)OOD are produced in the initial C−H and O−D insertion, respectively. The former undergoes further decomposition of the newly formed OH or the original OD, whereas the latter produces OD via direct decomposition. Decomposition of HOC(O)OD produced OH and OD with similar vibrational excitation, indicating efficient intramolecular vibrational relaxation, IVR. Decomposition of HC(O)OOD produced OD with greater rotational excitation. The predicted [OH]/[OD] ratio is 0.20 for O({sup 1}D) + HCOOD and 4.08 for O({sup 1}D) + DCOOH; the former agrees satisfactorily with experiments. We also observed the v{sub 3} emission from the product CO{sub 2}. This emission band is deconvoluted into two components corresponding to internal energies E = 317 and 96 kJ mol{sup −1} of CO{sub 2}, predicted to be produced via direct dehydration of HOC(O)OH and secondary decomposition of HC(O)O that was produced via decomposition of HC(O)OOH, respectively.

Flight Hardware Packaging Design for Stringent EMC Radiated Emission Requirements

Science.gov (United States)

Lortz, Charlene L.; Huang, Chi-Chien N.; Ravich, Joshua A.; Steiner, Carl N.

2013-01-01

This packaging design approach can help heritage hardware meet a flight project's stringent EMC radiated emissions requirement. The approach requires only minor modifications to a hardware's chassis and mainly concentrates on its connector interfaces. The solution is to raise the surface area where the connector is mounted by a few millimeters using a pedestal, and then wrapping with conductive tape from the cable backshell down to the surface-mounted connector. This design approach has been applied to JPL flight project subsystems. The EMC radiated emissions requirements for flight projects can vary from benign to mission critical. If the project's EMC requirements are stringent, the best approach to meet EMC requirements would be to design an EMC control program for the project early on and implement EMC design techniques starting with the circuit board layout. This is the ideal scenario for hardware that is built from scratch. Implementation of EMC radiated emissions mitigation techniques can mature as the design progresses, with minimal impact to the design cycle. The real challenge exists for hardware that is planned to be flown following a built-to-print approach, in which heritage hardware from a past project with a different set of requirements is expected to perform satisfactorily for a new project. With acceptance of heritage, the design would already be established (circuit board layout and components have already been pre-determined), and hence any radiated emissions mitigation techniques would only be applicable at the packaging level. The key is to take a heritage design with its known radiated emissions spectrum and repackage, or modify its chassis design so that it would have a better chance of meeting the new project s radiated emissions requirements.

On the agency and dynamics of transformative social innovation

DEFF Research Database (Denmark)

Haxeltine, Alex; Jørgensen, Michael Søgaard; Pel, Bonno

2016-01-01

This working paper presents a set of propositions about the agency and dynamics of transformative social innovation (TSI)that have been developed as part of an EU-funded research project entitled “TRANsformative Social Innovation Theory” (TRANSIT; 2014-2017). These TSI propositions represent first...

On the agency and dynamics of transformative social innovation

NARCIS (Netherlands)

Weaver, Paul

2016-01-01

This working paper presents a set of propositions about the agency and dynamics of transformative social innovation (TSI) that have been developed as part of an EU-funded research project entitled “TRANsformative Social Innovation Theory” (TRANSIT; 2014-2017). These TSI propositions represent first

Decadal evolution of ship emissions in China from 2004 to 2013 by using an integrated AIS-based approach and projection to 2040

Science.gov (United States)

Li, Cheng; Borken-Kleefeld, Jens; Zheng, Junyu; Yuan, Zibing; Ou, Jiamin; Li, Yue; Wang, Yanlong; Xu, Yuanqian

2018-05-01

Ship emissions contribute significantly to air pollution and pose health risks to residents of coastal areas in China, but the current research remains incomplete and coarse due to data availability and inaccuracy in estimation methods. In this study, an integrated approach based on the Automatic Identification System (AIS) was developed to address this problem. This approach utilized detailed information from AIS and cargo turnover and the vessel calling number information and is thereby capable of quantifying sectoral contributions by fuel types and emissions from ports, rivers, coastal traffic and over-the-horizon ship traffic. Based upon the established methodology, ship emissions in China from 2004 to 2013 were estimated, and those to 2040 at 5-year intervals under different control scenarios were projected. Results showed that for the area within 200 nautical miles (Nm) of the Chinese coast, SO2, NOx, CO, PM10, PM2.5, hydrocarbon (HC), black carbon (BC) and organic carbon (OC) emissions in 2013 were 1010, 1443, 118, 107, 87, 67, 29 and 21 kt yr-1, respectively, which doubled over these 10 years. Ship sources contributed ˜ 10 % to the total SO2 and NOx emissions in the coastal provinces of China. Emissions from the proposed Domestic Emission Control Areas (DECAs) within 12 Nm constituted approximately 40 % of the all ship emissions along the Chinese coast, and this percentage would double when the DECA boundary is extended to 100 Nm. Ship emissions in ports accounted for about one-quarter of the total emissions within 200 Nm, within which nearly 80 % of the emissions were concentrated in the top 10 busiest ports of China. SO2 emissions could be reduced by 80 % in 2020 under a 0.5 % global sulfur cap policy. In comparison, a similar reduction of NOx emissions would require significant technological change and would likely take several decades. This study provides solid scientific support for ship emissions control policy making in China. It is suggested to

Oxyfuel combustion for below zero CO{sub 2} emissions

Energy Technology Data Exchange (ETDEWEB)

Boeg Toftegaard, M; Hansen, Kim G; Fisker, D [DONG Energy Power, Hvidovre (Denmark); Brix, J; Brun Hansen, B; Putluru, S S.R.; Jensen, Peter Arendt; Glarborg, Peter; Degn Jensen, A [Technical Univ. of Denmark. CHEC Research Centre, Kgs. Lyngby (Denmark); Montgomery, M [Technical Univ. of Denmark. DTU Mechanical Engineering, Kgs. Lyngby (Denmark)

2011-07-01

The reduction of CO{sub 2} emissions is of highest concern in relation to limiting the anthropogenic impacts on the environment. Primary focus has gathered on the large point sources of CO{sub 2} emissions constituted by large heat and power stations and other heavy, energy-consuming industry. Solutions are sought which will enable a significant reduction of the anthropogenic CO{sub 2} emissions during the transformation period from the use of fossil fuels to renewable sources of energy. Carbon capture and storage (CCS) has the potential to significantly reduce CO{sub 2} emissions from power stations while allowing for the continuous utilisation of the existing energy producing system in the transformation period. Oxyfuel combustion is one of the possible CCS technologies which show promising perspectives for implementation in industrial scale within a relatively short period of time. Oxyfuel combustion deviates from conventional combustion in air by using a mixture of pure oxygen and recirculated flue gas as the combustion medium thereby creating a flue gas highly concentrated in CO{sub 2} making the capture process economically more feasible compared to technologies with capture from more dilute CO{sub 2} streams. This project has investigated a number of the fundamental and practical issues of the oxyfuel combustion process by experimental, theoretical, and modelling investigations in order to improve the knowledge of the technology. The subjects investigated cover: general combustion characteristics of coal and biomass (straw) and mixtures thereof, formation and emission of pollutants, ash characteristics, flue gas cleaning for SO{sub 2} by wet scrubbing with limestone and for NO{sub x} by selective catalytic reduction (SCR), corrosion of boiler heat transfer surfaces, operation and control of large suspension-fired boilers, and the perspectives for the implementation of oxyfuel combustion s a CO{sub 2} sequestration solution in the Danish power production

K-α emission form medium and high-Z materials irradiated by femtosecond laser pulses

International Nuclear Information System (INIS)

Limpouch, J.; Klimo, O.; Zhavoronkov, N.; Andreev, A.A.

2006-01-01

Complete test of publication follows. Fast electrons are created at the target surface during the interaction of high intensity ultra short laser pulses with solids. Fast electrons penetrate deep into the target where they generate K-α and Bremsstrahlung radiation. Generated high brightness K-α pulses offer the prospect of creating a cheap and compact X-ray source, posing a promising alternative to synchrotron radiation, e.g. in medical application and in material science. With an increase in laser intensity, efficient X-ray emission in the multi-keV range with pulse duration shorter than few picoseconds is expected. This short incoherent but monochromatic X-ray emission synchronized with laser pulses may be used for time-resolved measurements. Acceleration of fast electrons, their transport and K-α photon generation and emission from the target surface in both forward and backward directions are studied here numerically. The results are compared to recent experiments studying K-α emission from the front and rear surface of copper foil targets of various thicknesses and for various parameters of the laser plasma interaction. One-dimensional PIC simulations coupled with 3D time-resolved Monte Carlo simulations show that account of ionization processes and of density profile formed by laser ASE emission is essential for reliable explanation of experimental data. While sub-relativistic intensities are optimum for laser energy transformation into K-α emission for medium-Z targets, relativistic laser intensities have to be used for hard X-ray generation in high-Z materials. The cross-section for K-α shell ionization of high-Z elements by electrons increases or remains approximately constant within a factor of two at relativistic electron energies up to electron energies in the 100-MeV range. Moreover, the splitting ratio of K-α photon emission to Auger electron emission is favorable for high-Z materials, and thus efficient K-α emission is possible. In our

Promoting energy-efficient products: GEF experience and lessons for market transformation in developing countries

International Nuclear Information System (INIS)

Birner, Sabrina; Martinot, Eric

2005-01-01

The Global Environment Facility (GEF) has allocated more than $90 million over the past 10 years to eight projects promoting energy-efficient products in developing and transition countries. We review the early experience from these projects and suggest lessons relevant to market transformation programs. Based on GEF project designs, we also propose a menu of generic supply-side and demand-side interventions useful for designing and analyzing market transformation programs. Experience suggests that institutional and policy changes, leading to sustained price reductions and higher market volumes, are important outcomes for market transformation; that market impacts can appear early in programs due to increased expectations and awareness; and that projects can have a catalytic effect. We recommend eight principles for designers of future projects but caution that no single approach guarantees success

Emissions from hydroelectric reservoirs and comparison of hydroelectricity, natural gas and oil

International Nuclear Information System (INIS)

Gagnon, L.; Chamberland, A.

1993-01-01

When reservoirs are created, a small fraction of the flooded organic matter decomposes into humic acids, carbon dioxide (CO 2 ), methane (CH 4 ), nitrogen, phosphorus, and other elements. The major greenhouse gases produced are CO 2 and CH 4 . For northern projects, Canadian studies on emissions from hydroelectric reservoirs have reached similar conclusions: Emissions, including methane, are less than 35 kg CO 2 equivalent per MWh. Using a typical project in northern Quebec as the basis for analysis, none of the studies dispute the considerable advantages of hydroelectricity regarding greenhouse gas emissions. Taking into account all components of energy systems, emissions of greenhouse gases from natural-gas power plants are 24 to 26 times greater than emissions from hydroelectric plants. The Freshwater Institute, in an article published in Ambio suggests that emissions from hydroelectric plants could be a significant source of greenhouse gases. This conclusion does not apply to most hydroelectric projects for two reasons: First, the Freshwater Institute's studies concerned flooded peatlands and shallow reservoirs that are not typical of most hydro projects; and second, the Institute analyzed a hydro project with a ratio of flooded area to energy production that is 6 to 10 times higher than typical projects in Canada. 7 refs, 4 tabs

Reducing global NOx emissions: developing advanced energy and transportation technologies.

Science.gov (United States)

Bradley, Michael J; Jones, Brian M

2002-03-01

Globally, energy demand is projected to continue to increase well into the future. As a result, global NOx emissions are projected to continue on an upward trend for the foreseeable future as developing countries increase their standards of living. While the US has experienced improvements in reducing NOx emissions from stationary and mobile sources to reduce ozone, further progress is needed to reduce the health and ecosystem impacts associated with NOx emissions. In other parts of the world, (in developing countries in particular) NOx emissions have been increasing steadily with the growth in demand for electricity and transportation. Advancements in energy and transportation technologies may help avoid this increase in emissions if appropriate policies are implemented. This paper evaluates commercially available power generation and transportation technologies that produce fewer NOx emissions than conventional technologies, and advanced technologies that are on the 10-year commercialization horizon. Various policy approaches will be evaluated which can be implemented on the regional, national and international levels to promote these advanced technologies and ultimately reduce NOx emissions. The concept of the technology leap is offered as a possibility for the developing world to avoid the projected increases in NOx emissions.

Developing a nurse-led clinic using transformational leadership.

Science.gov (United States)

Gousy, Mamood; Green, Kim

2015-03-25

Nurses are at the forefront of implementing and managing change, given constantly changing healthcare services and the increase in demand for health care. Therefore, it is important to identify the best style of leadership to engage nurses in implementing service-led improvements. This article explores the effects of transformational leadership in bringing about service-led improvements in health care, using the example of setting up a nurse-led acupuncture clinic to optimise the care of patients with chronic pain. Transformational leadership was used throughout the project - from the initial local planning, training and development, through to liaising with the appropriate staff and deciding on an evaluation strategy. Transformational leadership proved to be an effective way to engage and empower nurses and other members of the chronic pain team to enable them to achieve the project aims.

Emissions inventories and options for control. Summary report

Energy Technology Data Exchange (ETDEWEB)

Swart, R.J.; Van Amstel, A.R.; Van den Born, G.J.; Kroeze, C.

1995-10-01

This report is the final summary report of the project `Social causes of the greenhouse effect, emissions inventories and options for control`. The objectives of the project, that started in 1990, were to support the development of a comprehensive Dutch climate policy and to identify gaps in the knowledge about sources of greenhouse gases. The four phases of the project are summarized. In the first phase, a first national inventory of greenhouse gas emissions was made, capturing carbon dioxide (CO{sub 2}), chlorofluorocarbons (CFCs), methane (CH{sub 4}), nitrous oxide (N{sub 2}O) and the ozone precursors carbon monoxide (CO), nitrogen oxides (NO{sub x} ) and volatile organic compounds (VOC). In the second phase, the acquired expertise was used to support the development of Guidelines for National Emissions Inventories by the joint OECD/IPCC programme through workshop organization and participation in the international planning group. In the third phase, a detailed analysis was performed of the sources of methane, its current and future emissions and the options for control. Finally, a similar analysis was performed for nitrous oxide. In these studies, it was found that policies not specifically aiming at mitigating climate change, would help to control the emissions of the non-CO{sub 2} greenhouse gases. While for methane, national emissions would even decrease because of measures in the livestock management and waste disposal sectors, for nitrous oxide the reductions in agricultural emissions would be outweighed by increases, especially in the transportation sector. The project shows that the application of more detailed information leads to differences with the Guidelines, both because of the limited number of source categories in the Guidelines and because of different, locally specific emissions factors. 4 figs., 2 tabs., 14 refs.

The radon transform. Theory and implementation

International Nuclear Information System (INIS)

Toft, P.

1996-01-01

The subject of this Ph.D. thesis is the mathematical Radon transform, which is well suited for curve detection in digital images, and for reconstruction of tomography images. The thesis is divided into two main parts. Part I describes the Radon- and the Hough-transform and especially their discrete approximations with respect to curve parameter detection in digital images. The sampling relationships of the Radon transform is reviewed from a digital signal processing point of view. The discrete Radon transform is investigated for detection of curves, and aspects regarding the performance of the Radon transform assuming various types of noise is covered. Furthermore, a new fast scheme for estimating curve parameters is presented. Part II of the thesis describes the inverse Radon transform in 2D and 3D with focus on reconstruction of tomography images. Some of the direct reconstruction schemes are analyzed, including their discrete implementation. Furthermore, several iterative reconstruction schemes based on linear algebra are reviewed and applied for reconstruction of Positron Emission Tomography (PET) images. A new and very fast implementation of 2D iterative reconstruction methods is devised. In a more practical oriented chapter, the noise in PET images is modelled from a very large number of measurements. Several packagers for Radon- and Hough-transform based curve detection and direct/iterative 2D and 3D reconstruction have been developed and provided for free. (au) 140 refs

Energy Smart Guide to Campus Cost Savings: Today's Trends in Project Finance, Clean Fuel Fleets, Combined Heat& Power, Emissions Markets

Energy Technology Data Exchange (ETDEWEB)

2003-07-01

The Energy Smart Guide to Campus Cost Savings covers today's trends in project finance, combined heat& power, clean fuel fleets and emissions trading. The guide is directed at campus facilities and business managers and contains general guidance, contact information and case studies from colleges and universities across the country.

Transformative Dynamics in Detailed Planning

DEFF Research Database (Denmark)

Quitzau, Maj-Britt; Poulsen, Naja; Gustavsson, Ted

Many of the ambitious sustainable strategies on how to integrate sustainable solutions expressed in urban development projects do not become materialized in the urban design. This paper aims to uncover the transformative dynamics involved in this translation process of materializing the formulate...

Resident support for a landfill-to-park transformation

Science.gov (United States)

Christine A. Vogt; David B. Klenosky; Stephanie A. Snyder; Lindsay K. Campbell

2015-01-01

Globally, landfills are being transformed into other uses because land resources scarce, property values are increasing, and governments seek to reduce urban blight and adaptively reuse space. Park planners and city managers are likely to find that gauging public perceptions of a landfill-to-park project transformation and promoting such sites to potential visitors as...

Transformation of ammonia i biological airfilters

DEFF Research Database (Denmark)

Nielsen, Lars Peter; Sørensen, Karen; Andersen, Mathias

2007-01-01

Ammonia is a major compound in ventilation air from animal houses. In biological filters it is with varying efficiency transformed by physical, biological, and chemical processes and ends up as ammonium, nitrate, and nitrite dissolved in water and as dinitrogen, nitrous oxide and nitric oxide...... emitted to the air. To identify the key regulators of these transformations we have combined data from studies of microbiology and performance in 10 experimental and full scale filters of varying design, loading, and management. Inhibition by nitrite controlled ammonium oxidation and pH, while biological...... removal without too much energy consumption, waste water production, green house gas emission, or suppression of the filters odor removal efficiency....

Report on the obligation to make a greenhouse gas emission assessment as foreseen in article 26 of the 'National Commitment for Environment' project bill

International Nuclear Information System (INIS)

2009-01-01

After having recalled the measures defined in articles 23 and 26 of the 'National Commitment for the Environment' project bill after it has been voted by the French Senate, this report explains why companies, public institutions and local communities are asked to assess their greenhouse gas emissions. The aim is to mobilise the main French actors on the emission reduction objectives, to decentralize the measures adopted in the 'Grenelle 1' bill, to define specific objectives for companies, public institutions and local communities. In its second part, the report proposes an overview of the current situation in terms of emission assessment (main international systems of reference, methods and tools, scopes). Recommendations are formulated to perform such an assessment

Experiences of CO2 domestic projects in the world

International Nuclear Information System (INIS)

Dominicis, A. de

2005-09-01

The Kyoto protocol provides for two projects allowing the valorization, by actives carbon, the greenhouse gases emission reduction. In addition to theses two projects, other mechanisms more local are developing. If these mechanisms goal is the same (to incentive the implementation of projects of emissions reduction), the implementation is often different. This evaluation takes stock on this new domestic projects. (A.L.B.)

Dynamic PET simulator via tomographic emission projection for kinetic modeling and parametric image studies

Energy Technology Data Exchange (ETDEWEB)

Häggström, Ida, E-mail: haeggsti@mskcc.org [Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York, New York 10065 and Department of Radiation Sciences, Umeå University, Umeå 90187 (Sweden); Beattie, Bradley J.; Schmidtlein, C. Ross [Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York, New York 10065 (United States)

2016-06-15

Purpose: To develop and evaluate a fast and simple tool called dPETSTEP (Dynamic PET Simulator of Tracers via Emission Projection), for dynamic PET simulations as an alternative to Monte Carlo (MC), useful for educational purposes and evaluation of the effects of the clinical environment, postprocessing choices, etc., on dynamic and parametric images. Methods: The tool was developed in MATLAB using both new and previously reported modules of PETSTEP (PET Simulator of Tracers via Emission Projection). Time activity curves are generated for each voxel of the input parametric image, whereby effects of imaging system blurring, counting noise, scatters, randoms, and attenuation are simulated for each frame. Each frame is then reconstructed into images according to the user specified method, settings, and corrections. Reconstructed images were compared to MC data, and simple Gaussian noised time activity curves (GAUSS). Results: dPETSTEP was 8000 times faster than MC. Dynamic images from dPETSTEP had a root mean square error that was within 4% on average of that of MC images, whereas the GAUSS images were within 11%. The average bias in dPETSTEP and MC images was the same, while GAUSS differed by 3% points. Noise profiles in dPETSTEP images conformed well to MC images, confirmed visually by scatter plot histograms, and statistically by tumor region of interest histogram comparisons that showed no significant differences (p < 0.01). Compared to GAUSS, dPETSTEP images and noise properties agreed better with MC. Conclusions: The authors have developed a fast and easy one-stop solution for simulations of dynamic PET and parametric images, and demonstrated that it generates both images and subsequent parametric images with very similar noise properties to those of MC images, in a fraction of the time. They believe dPETSTEP to be very useful for generating fast, simple, and realistic results, however since it uses simple scatter and random models it may not be suitable for

Dynamic PET simulator via tomographic emission projection for kinetic modeling and parametric image studies

International Nuclear Information System (INIS)

Häggström, Ida; Beattie, Bradley J.; Schmidtlein, C. Ross

2016-01-01

Purpose: To develop and evaluate a fast and simple tool called dPETSTEP (Dynamic PET Simulator of Tracers via Emission Projection), for dynamic PET simulations as an alternative to Monte Carlo (MC), useful for educational purposes and evaluation of the effects of the clinical environment, postprocessing choices, etc., on dynamic and parametric images. Methods: The tool was developed in MATLAB using both new and previously reported modules of PETSTEP (PET Simulator of Tracers via Emission Projection). Time activity curves are generated for each voxel of the input parametric image, whereby effects of imaging system blurring, counting noise, scatters, randoms, and attenuation are simulated for each frame. Each frame is then reconstructed into images according to the user specified method, settings, and corrections. Reconstructed images were compared to MC data, and simple Gaussian noised time activity curves (GAUSS). Results: dPETSTEP was 8000 times faster than MC. Dynamic images from dPETSTEP had a root mean square error that was within 4% on average of that of MC images, whereas the GAUSS images were within 11%. The average bias in dPETSTEP and MC images was the same, while GAUSS differed by 3% points. Noise profiles in dPETSTEP images conformed well to MC images, confirmed visually by scatter plot histograms, and statistically by tumor region of interest histogram comparisons that showed no significant differences (p < 0.01). Compared to GAUSS, dPETSTEP images and noise properties agreed better with MC. Conclusions: The authors have developed a fast and easy one-stop solution for simulations of dynamic PET and parametric images, and demonstrated that it generates both images and subsequent parametric images with very similar noise properties to those of MC images, in a fraction of the time. They believe dPETSTEP to be very useful for generating fast, simple, and realistic results, however since it uses simple scatter and random models it may not be suitable for

Acoustic emission generated by fluid leakage

International Nuclear Information System (INIS)

Kim, H.C.

1987-01-01

The noise generated by the leaking saturated steam and subcooled water form various sizes of hole has been measured as function of leak rate and stagnation pressure. Acoustic emission (proportinal to root mean sguare voltage) is shown to be proportional to the leak rate and stagnation pressure. A transition of acoustic emission power is observed at the stagnation pressure 0.185 MPa associated with the transition to the critical flow state. Substantially higher acoustic emission power generated by the subcooled water leakage is attributed to the flashing source involving the phase transformation and volume expansion. The relative amplitude of noise spectrum becomes more spiky as the leak rate and stagnation pressure increased. (Author)

Lower Churchill project

Energy Technology Data Exchange (ETDEWEB)

Gilbert, B. [Nalcor Energy, St. John' s, Newfoundland (Canada)

2011-07-01

This paper discusses the Lower Churchill Hydroelectric Generation Project in Newfoundland Labrador. The project is of national interest as it creates jobs and benefits across Canada. It provides inter provincial electricity grid integration, provides significant contribution to lower emissions and enables development of other renewable generation.

Using Travel Diary Data to Estimate the Emissions Impacts of Transportation Strategies: The Puget Sound Telecommuting Demonstration Project.

Science.gov (United States)

Henderson, Dennis K; Koenig, Brett E; Mokhtarian, Patricia L

1996-01-01

Transportation control measures are often implemented for their environmental benefits, but there is a need to quantify what benefits actually occur. Telecommuting has the potential to reduce the number of daily trips and miles traveled with personal vehicles and, consequently, the overall emissions resulting from vehicle activity. This search studies the emissions impacts of telecommuting for the participants of the Puget Sound Telecommuting Demonstration Project (PSTDP). The California Air Resources Board's emissions models, EMFAC7F and BURDEN7F, are used to estimate the emissions on telecommuting days and non-telecommuting days, based on travel diaries completed by program participants. This study, among the first of its kind, represents the most sophisticated application of emissions models to travel diary data. Analysis of the travel diary data and the emissions model output supports the hypothesis that telecommuting has beneficial transportation and air quality impacts. The most important results are that telecommuting decreases the number of daily trips (by 30%), the vehicle-miles traveled (VMT) (by 63%), and the number of cold starts (by 44%), especially those taking place in early morning. These reductions are shown to have a large effect on daily emissions, with a 50% to 60% decrease in pollutants generated by a telecommuter's personal vehicle use on a telecommuting day. These net savings are almost entirely due to the elimination of commute trips, as non-commute trips increased by 0.33 trips per person-day (9% of the total trips), and the non-commute VMT increased by 2.2 miles. Overall reduc- tions in travel and emissions of this magnitude are observed because the telecommuters in this sample are long-distance commuters, with commutes twice as long as the regional average. However, even as telecommuting adoption moves into the mainstream, its net impacts are still expected to be beneficial- a reduction in VMT and in emissions. It is important to note

Enforcement of emissions trading: Sanction regimes of greenhouse gas emissions trading in the EU and China

NARCIS (Netherlands)

Peeters, M.G.W.M.; Chen, Huizhen

2015-01-01

Abstract: This chapter aims to further the debate regarding the role of law for establishing an adequate enforcement strategy for an emissions trading scheme. We focus on sanction regimes within the EU ETS and the Chinese emissions trading pilot projects. Section 2 sets the scene by pointing at the

An objective decision model of power grid environmental protection based on environmental influence index and energy-saving and emission-reducing index

Science.gov (United States)

Feng, Jun-shu; Jin, Yan-ming; Hao, Wei-hua

2017-01-01

Based on modelling the environmental influence index of power transmission and transformation project and energy-saving and emission-reducing index of source-grid-load of power system, this paper establishes an objective decision model of power grid environmental protection, with constraints of power grid environmental protection objectives being legal and economical, and considering both positive and negative influences of grid on the environmental in all-life grid cycle. This model can be used to guide the programming work of power grid environmental protection. A numerical simulation of Jiangsu province’s power grid environmental protection objective decision model has been operated, and the results shows that the maximum goal of energy-saving and emission-reducing benefits would be reached firstly as investment increasing, and then the minimum goal of environmental influence.

Ontology Based Model Transformation Infrastructure

NARCIS (Netherlands)

Göknil, Arda; Topaloglu, N.Y.

2005-01-01

Using MDA in ontology development has been investigated in several works recently. The mappings and transformations between the UML constructs and the OWL elements to develop ontologies are the main concern of these research projects. We propose another approach in order to achieve the collaboration

Carbon Dioxide Emission Evaluation of Porous Vegetation Concrete Blocks for Ecological Restoration Projects

Directory of Open Access Journals (Sweden)

Hwang-Hee Kim

2017-02-01

Full Text Available The purpose of this study is to determine the mix proportions that can minimize CO2 emissions while satisfying the target performance of porous vegetation concrete. The target performance of porous vegetation concrete was selected as compressive strength (>15 MPa and void ratio (>25%. This study considered the use of reinforcing fiber and styrene butadiene (SB latex to improve the strength of porous vegetation concrete, as well as the use of blast furnace slag aggregate to improve the CO2 emissions-reducing effect, and analyzed and evaluated the influence of fiber reinforcing, SB latex, and blast furnace slag aggregate on the compressive strength and CO2 emissions of porous vegetation concrete. The CO2 emissions of the raw materials were highest for cement, followed by aggregate, SB latex, and fiber. Blast furnace slag aggregate showed a 30% or more CO2 emissions-reducing effect versus crushed aggregate, and blast furnace slag cement showed a 78% CO2 emissions-reducing effect versus Portland cement. The CO2 emissions analyses for each raw material showed that the CO2 emissions during transportation were highest for the aggregate. Regarding CO2 emissions in each production stage, the materials stage produced the highest CO2 emissions, while the proportion of CO2 emissions in the transportation stage for each raw material, excluding fiber, were below 3% of total emissions. Use of blast furnace slag aggregate in porous vegetation concrete produced CO2 emissions-reducing effects, but decreased its compressive strength. Use of latex in porous vegetation concrete improved its compressive strength, but also increased CO2 emissions. Thus, it is appropriate to use latex in porous vegetation concrete to improve its strength and void ratio, and to use a blast furnace slag aggregate replacement ratio of 40% or less.

Development of a Hough transformation track finder for time projection chambers

International Nuclear Information System (INIS)

Heinze, Isa

2013-12-01

The International Linear Collider (ILC) is a planned particle physics experiment. One of the two detector concepts is the International Large Detector (ILD) concept for which a time projection chamber is foreseen as the main tracking device. In the ILD the particle flow concept is followed which leads to special requirements for the detector. Especially for the tracking system a very good momentum resolution is required. Several prototypes were build to prove that it is possible to build a TPC which fulfills the requirements for a TPC in the ILD. One is the Large Prototype with which different readout technologies currently under development are tested. In parallel reconstruction software is developed for the reconstruction of Large Prototype data. In this thesis the development of a track finding algorithm based on the Hough transformation is described. It can find curved tracks (with magnetic field) as well as straight tracks (without magnetic field). This package was mainly developed for Large Prototype testbeam data but was also tested on Monte Carlo simulation of tracks in the ILD TPC. Furthermore the analysis of testbeam data regarding the single point resolution is presented. The data were taken with the Large Prototype and a readout module with GEM (gas electron multiplier) amplification. For the reconstruction of these data the software package mentioned above was used. The single point resolution is directly related to the momentum resolution of the detector, thus a good single point resolution is needed to achieve a good momentum resolution.

Development of a Hough transformation track finder for time projection chambers

Energy Technology Data Exchange (ETDEWEB)

Heinze, Isa

2013-12-15

The International Linear Collider (ILC) is a planned particle physics experiment. One of the two detector concepts is the International Large Detector (ILD) concept for which a time projection chamber is foreseen as the main tracking device. In the ILD the particle flow concept is followed which leads to special requirements for the detector. Especially for the tracking system a very good momentum resolution is required. Several prototypes were build to prove that it is possible to build a TPC which fulfills the requirements for a TPC in the ILD. One is the Large Prototype with which different readout technologies currently under development are tested. In parallel reconstruction software is developed for the reconstruction of Large Prototype data. In this thesis the development of a track finding algorithm based on the Hough transformation is described. It can find curved tracks (with magnetic field) as well as straight tracks (without magnetic field). This package was mainly developed for Large Prototype testbeam data but was also tested on Monte Carlo simulation of tracks in the ILD TPC. Furthermore the analysis of testbeam data regarding the single point resolution is presented. The data were taken with the Large Prototype and a readout module with GEM (gas electron multiplier) amplification. For the reconstruction of these data the software package mentioned above was used. The single point resolution is directly related to the momentum resolution of the detector, thus a good single point resolution is needed to achieve a good momentum resolution.

LINKING PERSONAL COMPETENCIES WITH TRANSFORMATIONAL LEADERSHIP STYLE EVIDENCE FROM THE CONSTRUCTION INDUSTRY IN THAILAND

Directory of Open Access Journals (Sweden)

Kedsuda Limsila

2008-06-01

Full Text Available This study explored the linkage between personal competencies and leadership behaviours as well as their influences on leadership outcomes and subordinates’ work performance. Personal competencies were measured using the Project Manager Competency Development (PMCD tool. Leadership behaviours and outcomes were measured using Multifactor Leadership Questionnaire (MLQ. Data was collected from construction projects in Thailand. Findings revealed that leadership outcomes have significant positive relationship with all personal competencies specified in the PMCD framework, every factor in the transformational style and contingent reward factor in the transactional style. Transformational leaders tend to produce high work quality, work quantity, and problem solving creativity from subordinates. Findings further verified that all PMCD personal competencies have significant positive relationship with every factor in the transformational style. It implies that project managers who apply the transformational style and/or have high personal competencies indicated in PMCD framework are likely to generate greater leadership outcomes and work performance on construction projects.

Tropospheric ozone changes, radiative forcing and attribution to emissions in the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP

Directory of Open Access Journals (Sweden)

D. S. Stevenson

2013-03-01

Full Text Available Ozone (O3 from 17 atmospheric chemistry models taking part in the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP has been used to calculate tropospheric ozone radiative forcings (RFs. All models applied a common set of anthropogenic emissions, which are better constrained for the present-day than the past. Future anthropogenic emissions follow the four Representative Concentration Pathway (RCP scenarios, which define a relatively narrow range of possible air pollution emissions. We calculate a value for the pre-industrial (1750 to present-day (2010 tropospheric ozone RF of 410 mW m−2. The model range of pre-industrial to present-day changes in O3 produces a spread (±1 standard deviation in RFs of ±17%. Three different radiation schemes were used – we find differences in RFs between schemes (for the same ozone fields of ±10%. Applying two different tropopause definitions gives differences in RFs of ±3%. Given additional (unquantified uncertainties associated with emissions, climate-chemistry interactions and land-use change, we estimate an overall uncertainty of ±30% for the tropospheric ozone RF. Experiments carried out by a subset of six models attribute tropospheric ozone RF to increased emissions of methane (44±12%, nitrogen oxides (31 ± 9%, carbon monoxide (15 ± 3% and non-methane volatile organic compounds (9 ± 2%; earlier studies attributed more of the tropospheric ozone RF to methane and less to nitrogen oxides. Normalising RFs to changes in tropospheric column ozone, we find a global mean normalised RF of 42 mW m−2 DU−1, a value similar to previous work. Using normalised RFs and future tropospheric column ozone projections we calculate future tropospheric ozone RFs (mW m−2; relative to 1750 for the four future scenarios (RCP2.6, RCP4.5, RCP6.0 and RCP8.5 of 350, 420, 370 and 460 (in 2030, and 200, 300, 280 and 600 (in 2100. Models show some coherent responses of ozone to climate change

Emission factors of the iron and steel sector for the emission reporting; Emissionsfaktoren zur Eisen- und Stahlindustrie fuer die Emissionsberichterstattung

Energy Technology Data Exchange (ETDEWEB)

Hensmann, Michael; Haardt, Sebastian; Ebert, Dominik [Betriebsforschungsinstitut VDEh-Institut fuer Angewandte Forschung GmbH, Duesseldorf (Germany)

2012-10-15

The German Umweltbundesamt (UBA) records emission factors of important groups of emitters of the iron- and steelmaking industry in a central database named ''Zentrales System Emissionen'' (ZSE) since 1990. This data is being used for calculations of emission inventories. The main purposes are the generation of forecasts, calculating emissions of other plants and the appraisal of potential measures for reduction of pollution. This makes it possible to identify and appraise future problems and measures. Because of steadily increasing requirements to data quality and quality assurance, it became necessary to update the ZSE with characteristical emission data in order to give a representative view of relevant stages in the iron- and steelmaking industry with respect to emissions. In 2008, the VDEh-Betriebsforschungsinstitut (BFI) was assigned to determine up-to-date emission factors for the following relevant stages in the iron- and steelmaking industry: - sintering plant - coking plant - blast furnace - steel making (differentiated between oxygen and electric steel making) - production of rolled steel Due to a wide diversity of data quality, a consecutive project to determine the corresponding uncertainty of the emission factors was integrated into the ongoing project. This is necessary to create reliable forecasts of emissions and to meet national and international duties of reporting. The project was supported by 18 companies of the German iron- and steelmaking industry. A total of 40 relevant sources of emissions were identified within the five stages of steelmaking and taken into consideration. The emission data for documenting organic and inorganic components of harmful gas, heavy metals and air borne dusts in the ZSE was taken from the reports of emissions 2008 of the supporting companies and made up for a total of 63 plants. Due to a wide variety of data quality the emissions of point sources and diffuse sources are treated separately. While

Models of Co2 emission trading system for projections in MSG6. Documentation and guidance; Utviklingen i stroemforbruket, prisfoelsomheten og stroemmarkedet

Energy Technology Data Exchange (ETDEWEB)

Faehn, Taran; Stroem, Birger

2012-08-15

Present context of the EU Co2 Emission Trading System (EU ETS) from 2008, involves new measures directed towards a large portion of present emissions sources. Currently there is no basis in statistics figures to offset the consequences of these international obligations in SSB models. In the model projections is nevertheless necessary to model both the current instruments and expected future changes in the rules and forms of association. This paper documents the Ministry of Finance to establish a arrangements for implementing Norway's association with the EU ETS in the model MSG6. It also addresses the EU ETS policy instruments interacting with other objectives and instruments of climate policy, including the Kyoto commitments and various domestic Climate tax systems. The European emissions trading price affect the Norwegian economy through several channels. Firstly, allowances mean that the EU ETS will cover activities that gets an emission rate equal to the permit price, which will influence the players to reduce emissions through various adaptations. Second, the remaining emissions occur subject to quotas, and the proportion who do not receive free allowances will give the state the auction revenue / proceeds. Third, quotas purchased in international markets will affect account surplus. This paper outlines various solutions and concludes by recommending a system that easily can be adapted for studies of any interaction between the EU ETS system and other climate policy objectives. The system can also be easily updated to new data.(eb)

Effects of recent energy system changes on CO2 projections for the United States.

Science.gov (United States)

Lenox, Carol S; Loughlin, Daniel H

2017-09-21

Recent projections of future United States carbon dioxide (CO 2 ) emissions are considerably lower than projections made just a decade ago. A myriad of factors have contributed to lower forecasts, including reductions in end-use energy service demands, improvements in energy efficiency, and technological innovations. Policies that have encouraged these changes include renewable portfolio standards, corporate vehicle efficiency standards, smart growth initiatives, revisions to building codes, and air and climate regulations. Understanding the effects of these and other factors can be advantageous as society evaluates opportunities for achieving additional CO 2 reductions. Energy system models provide a means to develop such insights. In this analysis, the MARKet ALlocation (MARKAL) model was applied to estimate the relative effects of various energy system changes that have happened since the year 2005 on CO 2 projections for the year 2025. The results indicate that transformations in the transportation and buildings sectors have played major roles in lowering projections. Particularly influential changes include improved vehicle efficiencies, reductions in projected travel demand, reductions in miscellaneous commercial electricity loads, and higher efficiency lighting. Electric sector changes have also contributed significantly to the lowered forecasts, driven by demand reductions, renewable portfolio standards, and air quality regulations.

Evaluation of green house gas emissions models.

Science.gov (United States)

2014-11-01

The objective of the project is to evaluate the GHG emissions models used by transportation agencies and industry leaders. Factors in the vehicle : operating environment that may affect modal emissions, such as, external conditions, : vehicle fleet c...

From up to date climate and ocean evidence with updated UN emissions projections, the time is now to recommend an immediate massive effort on CO2.

Science.gov (United States)

Carter, Peter

2017-04-01

This paper provides further compelling evidence for 'an immediate, massive effort to control CO2 emissions, stopped by mid-century' (Cai, Lenton & Lontzek, 2016). Atmospheric CO2 which is above 405 ppm (actual and trend) still accelerating, despite flat emissions since 2014, with a 2015 >3ppm unprecedented spike in Earth history (A. Glikson),is on the worst case IPCC scenario. Atmospheric methane is increasing faster than its past 20-year rate, almost on the worst-case IPCC AR5 scenario (Global Carbon Project, 2016). Observed effects of atmospheric greenhouse gas (GHG) pollution are increasing faster. This includes long-lived atmospheric GHG concentrations, radiative forcing, surface average warming, Greenland ice sheet melting, Arctic daily sea ice anomaly, ocean heat (and rate of going deeper), ocean acidification, and ocean de-oxygenation. The atmospheric GHG concentration of 485 ppm CO2 eq (WMO, 2015) commits us to 'about 2°C' equilibrium (AR5). 2°C by 2100 would require 'substantial emissions reductions over the next few decades' (AR5). Instead, the May 2016 UN update on 'intended' national emissions targets under the Paris Agreement projects global emissions will be 16% higher by 2030 and the November 2016 International Energy Agency update projects energy-related CO2 eq emissions will be 30% higher by 2030, leading to 'around 2.7°C by 2100 and above 3°C thereafter'. Climate change feedback will be positive this century and multiple large vulnerable sources of amplifying feedback exist (AR5). 'Extensive tree mortality and widespread forest die-back linked to drought and temperature stress have been documented on all vegetated continents' (AR5). 'Recent studies suggest a weakening of the land sink, further amplifying atmospheric growth of CO2' (WMO, 2016). Under all but the best-case IPCC AR5 scenario, surface temperature is projected to increase above 2°C by 2100, which is above 3°C (equilibrium) after 2100, with ocean acidification still increasing at

Enforcement of emissions trading - sanction regimes of greenhouse gas emissions trading in the EU and China

NARCIS (Netherlands)

Peeters, Marjan; Chen, Huizhen; Weishaar, Stefan

2016-01-01

This chapter aims to further the debate regarding the role of law for establishing an adequate enforcement strategy for an emissions trading scheme. We focus on sanction regimes within the EU ETS and the Chinese emissions trading pilot projects. Section 2 sets the scene by pointing at the need of an

Global warming and its implication to emission reduction strategies for residential buildings

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaoming; Chen, Dong; Ren, Zhengen [CSIRO Climate Adaptation Flagship and CSIRO Ecosystem Sciences, Commonwealth Scientific and Industrial Research Organisation (CSIRO), P.O. Box 56, Graham Road, Highett, Victoria 3190 (Australia)

2011-04-15

Carbon emission reduction schemes by improving residential building energy performance are often developed and assessed upon the assumption of current or stationary climates. This study investigated the heating and cooling (H-C) energy requirements and corresponding carbon emissions of residential houses in different climatic conditions in relation to global warming. This included assessing and quantifying the efficacy of emission reduction schemes based on emission reduction capacity (ERC). ERC represents the percentage of projected carbon emission reduction under changing climate in a specific year compared to the expected reduction by a scheme at current or stationary climates. It is shown that in a heating-dominated region with a cold climate or temperate climate with cold winter, ERC is projected to increase (or the projected emission reduction is higher than the expected reduction under the emission reduction scheme) in the presence of global warming. In contrast, in a cooling-dominated region with a hot dry or hot humid climate or an H-C balanced temperate climate, ERC is projected to decline. This implies that emission reductions will be lower than those initially targeted by the emission reduction scheme without consideration of global warming. Additionally, to reflect the changing carbon emission over years due to climate change, the average emission reduction capacity (AERC) was also proposed for the assessment of reduction schemes. It was concluded that the design and assessment of carbon emission reduction schemes for residential buildings need to move beyond its assumptions of a current or stationary climate to take into account climate change impacts. (author)

International Review of Standards and Labeling Programs for Distribution Transformers

Energy Technology Data Exchange (ETDEWEB)

Letschert, Virginie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Scholand, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Carreño, Ana María [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hernandez, Carolina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-06-20

Transmission and distribution (T&D) losses in electricity networks represent 8.5% of final energy consumption in the world. In Latin America, T&D losses range between 6% and 20% of final energy consumption, and represent 7% in Chile. Because approximately one-third of T&D losses take place in distribution transformers alone, there is significant potential to save energy and reduce costs and carbon emissions through policy intervention to increase distribution transformer efficiency. A large number of economies around the world have recognized the significant impact of addressing distribution losses and have implemented policies to support market transformation towards more efficient distribution transformers. As a result, there is considerable international experience to be shared and leveraged to inform countries interested in reducing distribution losses through policy intervention. The report builds upon past international studies of standards and labeling (S&L) programs for distribution transformers to present the current energy efficiency programs for distribution transformers around the world.

Greenhouse gas emissions trading: Cogen case studies in the early trading market

International Nuclear Information System (INIS)

Buerer, Mary Jean

2001-01-01

An increasing number of companies are interested in opportunities to trade their reduction in greenhouse gas emissions from cogeneration on the emerging greenhouse gas emissions market. Only the UK and Denmark currently have emissions trading schemes, but they are under development in other European countries. Two frameworks currently exist for trading. Baseline-and-credit trading is used in Canada where companies can take part in two voluntary schemes (Greenhouse Gas Emission Reduction Trading Pilot or Clean Air Canada Inc). An example project from the CHP unit at DuPont's Maitland chemical production facility is given, with details of the baselines and calculations used. The other option is company-wide emissions trading. The example given here features the CHP units at BP's refinery and chemicals operations in Texas. The potential revenue from emission reduction projects could help to boost the economics of cogeneration projects

Decoupling of CO2 emissions and GDP

Directory of Open Access Journals (Sweden)

Yves Rocha de Salles Lima

2016-12-01

Full Text Available The objetive of this work is to analyze the variation of CO2 emissions and GDP per capita throughout the years and identify the possible interaction between them. For this purpose, data from the International Energy Agency was collected on two countries, Brazil and the one with the highest GDP worldwide, the United States. Thus, the results showed that CO2 emissions have been following the country’s economic growth for many years. However, these two indicators have started to decouple in the US in 2007 while in Brazil the same happened in 2011. Furthermore, projections for CO2 emissions are made until 2040, considering 6 probable scenarios. These projections showed that even if the oil price decreases, the emissions will not be significantly affected as long as the economic growth does not decelerate.

COMPOSE-HPC: A Transformational Approach to Exascale

Energy Technology Data Exchange (ETDEWEB)

Bernholdt, David E [ORNL; Allan, Benjamin A. [Sandia National Laboratories (SNL); Armstrong, Robert C. [Sandia National Laboratories (SNL); Chavarria-Miranda, Daniel [Pacific Northwest National Laboratory (PNNL); Dahlgren, Tamara L. [Lawrence Livermore National Laboratory (LLNL); Elwasif, Wael R [ORNL; Epperly, Tom [Lawrence Livermore National Laboratory (LLNL); Foley, Samantha S [ORNL; Hulette, Geoffrey C. [Sandia National Laboratories (SNL); Krishnamoorthy, Sriram [Pacific Northwest National Laboratory (PNNL); Prantl, Adrian [Lawrence Livermore National Laboratory (LLNL); Panyala, Ajay [Louisiana State University; Sottile, Matthew [Galois, Inc.

2012-04-01

The goal of the COMPOSE-HPC project is to 'democratize' tools for automatic transformation of program source code so that it becomes tractable for the developers of scientific applications to create and use their own transformations reliably and safely. This paper describes our approach to this challenge, the creation of the KNOT tool chain, which includes tools for the creation of annotation languages to control the transformations (PAUL), to perform the transformations (ROTE), and optimization and code generation (BRAID), which can be used individually and in combination. We also provide examples of current and future uses of the KNOT tools, which include transforming code to use different programming models and environments, providing tests that can be used to detect errors in software or its execution, as well as composition of software written in different programming languages, or with different threading patterns.

Projective moment invariants

Czech Academy of Sciences Publication Activity Database

Suk, Tomáš; Flusser, Jan

2004-01-01

Roč. 26, č. 10 (2004), s. 1364-1367 ISSN 0162-8828 R&D Projects: GA ČR GA201/03/0675 Institutional research plan: CEZ:AV0Z1075907 Keywords : projective transform * moment invariants * object recognition Subject RIV: JD - Computer Applications, Robotics Impact factor: 4.352, year: 2004 http://library.utia.cas.cz/prace/20040112.pdf

Visualising the Process of Transformation

DEFF Research Database (Denmark)

Pedersen, Pia

2012-01-01

This paper investigates the process of transformation that is part of the ISOTYPE (International System Of TYpographic Picture Education) system, using the correspondence between Austrian sociologist Otto Neurath /his wife Marie Neurath and Town Clerk A. V. Williams of the town of Bilston in the UK....... The letters were written around 1946 and are part of the preparations for creating an exhibition—containing 12 charts—on a possible housing development project in Bilston, a poor neighbourhood in Staffordshire, England. According to the ISOTYPE system, the transformer, the link between expert and artist (M....... Neurath, 1960: 113-115), works across disciplines on organizing, analysing and configuring data into visual form (Kinross, 2009:6). It is my intention to use the correspondence from this transformation process to build on earlier identification and visualisation of the essential principles...

Effective bias removal for fringe projection profilometry using the dual-tree complex wavelet transform.

Science.gov (United States)

Ng, William Wai-Lam; Lun, Daniel Pak-Kong

2012-08-20

When reconstructing the three-dimensional (3D) object height profile using the fringe projection profilometry (FPP) technique, the light intensity reflected from the object surface can yield abruptly changing bias in the captured fringe image, which leads to severe reconstruction error. The traditional approach tries to remove the bias by suppressing the zero spectrum of the fringe image. It is based on the assumption that the aliasing between the frequency spectrum of the bias, which is around the zero frequency, and the frequency spectrum of the fringe is negligible. This, however, is not the case in practice. In this paper, we propose a novel (to our knowledge) technique to eliminate the bias in the fringe image using the dual-tree complex wavelet transform (DT-CWT). The new approach successfully identifies the features of bias, fringe, and noise in the DT-CWT domain, which allows the bias to be effectively extracted from a noisy fringe image. Experimental results show that the proposed algorithm is superior to the traditional methods and facilitates accurate reconstruction of objects' 3D models.

Agriculture and greenhouse gases emissions reduction; Agriculture et reduction des emissions de gaz a effet de serre

Energy Technology Data Exchange (ETDEWEB)

Leguet, B.

2005-09-15

In France, the agriculture is the third sector of greenhouse gases emitter. Meanwhile since 1990 this sector poorly reduces its greenhouse gases. It is necessary to find mechanisms which allow the valorization of emissions reduction. In this framework the author presents the specificities of the greenhouse gases emissions of the agricultural sector, the possible incentives of emissions reduction, the reduction projects in France and abroad. (A.L.B.)

Advanced Emissions Control Development Program: Mercury Control

International Nuclear Information System (INIS)

Evans, A.P.; Redinger, K.W.; Holmes, M.J.

1997-07-01

McDermott Technology, Inc. (a subsidiary of Babcock ampersand Wilcox) is conducting the Advanced Emissions Control Development Project (AECDP) which is aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (HAPS) from coal-fired electric utility plants. The need for such controls may arise as the US Environmental Protection Agency (EPA) proceeds with implementation of requirements set forth in the Clean Air Act Amendments (CAAA's) of 1990. Promulgation of air toxics emissions regulations for electric utility plants could dramatically impact utilities burning coal, their industrial and residential customers, and the coal industry. AECDP project work will supply the information needed by utilities to respond to potential HAPs regulations in a timely, cost-effective, enviromnentally-sound manner which supports the continued use of the Nation's abundant reserves of coal, such as those in the State of Ohio. The development work is being carried out using the 10 MW Clean Environment Development Facility wherein air toxics emissions control strategies can be developed under controlled conditions. The specific objectives of the project are to (1) measure and understand production and partitioning of air toxics species for a variety of coals, (2) optimize the air toxics removal performance of conventional flue gas cleanup systems, (3) develop advanced air toxics emissions control concepts, (4) develop and validate air toxics emissions measurement and monitoring techniques, and (5) establish a comprehensive, self-consistent air toxics data library. This project is supported by the Department of Energy, the Ohio Coal Development Office within the Ohio Department of Development and Babcock ampersand Wilcox. A comprehensive assessment of HAP emissions from coal-fired electric utility boilers sponsored by the Department of Energy and the Electric Power Research Institute concluded that with the exception of

Influence of economic factors on future global emissions

International Nuclear Information System (INIS)

Duffey, R.B.; Poehnell, T.G.; Miller, A.I.; Tamm, J.A.

2001-01-01

The climate change debate is really about economics, and reducing greenhouse gas (GHG) emissions and climate change potential at a reasonable and acceptable cost for everyone. In this paper, we examine the major economic factors behind defining climate change policies that relate to reducing GHG emissions, and the value to be placed on CO 2 . We examine the impacts and the 'cost of carbon' based on the studies of GHG reduction strategies in the US and the European Union (EU). We show that a series of self-defeating assumptions have been used in the latest analyses regarding relative future energy and power costs, and hence future GHG emissions. We estimate: the 'natural value' of GHG emissions based on world economic factors, the value of electricity and energy based on world data, the cost advantage of using a given new technology, and the value of avoided GHG emissions in future global and national climate change projections. The use of electricity is shown to be key in aiding economic growth for the entire world. Using the latest Intergovernmental Panel on Climate Change (IPCC) 2000 climate change projections as a base, we reflect the impacts of differing energy prices on future global climate conditions and GHG reductions. We conduct a similar analysis for Canada using the latest 'Energy in Canada 2000' projections. We show how the use of advanced technology for the traditional production of electricity, and for hydrogen-based transportation fuels, can stabilize global emissions and assist in managing adverse climate change conditions without causing economic penalties. The method we develop is sufficiently general that it can be used for valuing the economic impact of the emission reductions for any technology. We estimate the embedded value and potential economic benefit of nuclear technology and electric contribution for both the world economy to 2100, and for the latest projections for Canada to 2020. (author)

Graph Transformation for Consolidation of Creativity Sessions Results

DEFF Research Database (Denmark)

Dolog, Peter

2010-01-01

Graph transformation approach for consolidation of creativity sessions results is part of the FP7 EU/IST project idSpace: Tooling of and training for collaborative, distributed product innovation. The goal of graph transformation approach is to provide a tool for merging results of various sessions...... (such as brainstorming sessions), which are represented as graphs, when the session participants- are physically distributed....

Decadal evolution of ship emissions in China from 2004 to 2013 by using an integrated AIS-based approach and projection to 2040

Directory of Open Access Journals (Sweden)

C. Li

2018-05-01

Full Text Available Ship emissions contribute significantly to air pollution and pose health risks to residents of coastal areas in China, but the current research remains incomplete and coarse due to data availability and inaccuracy in estimation methods. In this study, an integrated approach based on the Automatic Identification System (AIS was developed to address this problem. This approach utilized detailed information from AIS and cargo turnover and the vessel calling number information and is thereby capable of quantifying sectoral contributions by fuel types and emissions from ports, rivers, coastal traffic and over-the-horizon ship traffic. Based upon the established methodology, ship emissions in China from 2004 to 2013 were estimated, and those to 2040 at 5-year intervals under different control scenarios were projected. Results showed that for the area within 200 nautical miles (Nm of the Chinese coast, SO2, NOx, CO, PM10, PM2.5, hydrocarbon (HC, black carbon (BC and organic carbon (OC emissions in 2013 were 1010, 1443, 118, 107, 87, 67, 29 and 21 kt yr−1, respectively, which doubled over these 10 years. Ship sources contributed  ∼ 10 % to the total SO2 and NOx emissions in the coastal provinces of China. Emissions from the proposed Domestic Emission Control Areas (DECAs within 12 Nm constituted approximately 40 % of the all ship emissions along the Chinese coast, and this percentage would double when the DECA boundary is extended to 100 Nm. Ship emissions in ports accounted for about one-quarter of the total emissions within 200 Nm, within which nearly 80 % of the emissions were concentrated in the top 10 busiest ports of China. SO2 emissions could be reduced by 80 % in 2020 under a 0.5 % global sulfur cap policy. In comparison, a similar reduction of NOx emissions would require significant technological change and would likely take several decades. This study provides solid scientific support for ship emissions control

The Soldier-Cyborg Transformation: A Framework for Analysis of Social and Ethical Issues of Future Warfare

Science.gov (United States)

1998-05-26

government agency. STRATEGY RESEARCH PROJECT THE SOLDIER- CYBORG TRANSFORMATION: A FRAMEWORK FOR ANALYSIS OF SOCIAL AND ETHICAL ISSUES OF FUTURE...UNCLASSIFIED USAWC STRATEGY RESEARCH PROJECT THE SOLDIER- CYBORG TRANSFORMATION: A FRAMEWORK FOR ANALYSIS OF SOCIAL AND ETHICAL ISSUES OF FUTURE...P) Donald A. Gagliano, M.D. TITLE: THE SOLDIER CYBORG TRANSFORMATION: A FRAMEWORK FOR ANALYSIS OF SOCIAL AND ETHICAL ISSUES OF FUTURE WARFARE

Continuous wavelet transform analysis and modal location analysis acoustic emission source location for nuclear piping crack growth monitoring

Energy Technology Data Exchange (ETDEWEB)

Mohd, Shukri [Nondestructive Testing Group, Industrial Technology Division, Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Holford, Karen M.; Pullin, Rhys [Cardiff School of Engineering, Cardiff University, Queen' s Buildings, The Parade, CARDIFF CF24 3AA (United Kingdom)

2014-02-12

Source location is an important feature of acoustic emission (AE) damage monitoring in nuclear piping. The ability to accurately locate sources can assist in source characterisation and early warning of failure. This paper describe the development of a novelAE source location technique termed 'Wavelet Transform analysis and Modal Location (WTML)' based on Lamb wave theory and time-frequency analysis that can be used for global monitoring of plate like steel structures. Source location was performed on a steel pipe of 1500 mm long and 220 mm outer diameter with nominal thickness of 5 mm under a planar location test setup using H-N sources. The accuracy of the new technique was compared with other AE source location methods such as the time of arrival (TOA) techniqueand DeltaTlocation. Theresults of the study show that the WTML method produces more accurate location resultscompared with TOA and triple point filtering location methods. The accuracy of the WTML approach is comparable with the deltaT location method but requires no initial acoustic calibration of the structure.

Continuous wavelet transform analysis and modal location analysis acoustic emission source location for nuclear piping crack growth monitoring

International Nuclear Information System (INIS)

Shukri Mohd

2013-01-01

Full-text: Source location is an important feature of acoustic emission (AE) damage monitoring in nuclear piping. The ability to accurately locate sources can assist in source characterisation and early warning of failure. This paper describe the development of a novelAE source location technique termed Wavelet Transform analysis and Modal Location (WTML) based on Lamb wave theory and time-frequency analysis that can be used for global monitoring of plate like steel structures. Source location was performed on a steel pipe of 1500 mm long and 220 mm outer diameter with nominal thickness of 5 mm under a planar location test setup using H-N sources. The accuracy of the new technique was compared with other AE source location methods such as the time of arrival (TOA) technique and DeltaTlocation. The results of the study show that the WTML method produces more accurate location results compared with TOA and triple point filtering location methods. The accuracy of the WTML approach is comparable with the deltaT location method but requires no initial acoustic calibration of the structure. (author)

Continuous wavelet transform analysis and modal location analysis acoustic emission source location for nuclear piping crack growth monitoring

International Nuclear Information System (INIS)

Mohd, Shukri; Holford, Karen M.; Pullin, Rhys

2014-01-01

Source location is an important feature of acoustic emission (AE) damage monitoring in nuclear piping. The ability to accurately locate sources can assist in source characterisation and early warning of failure. This paper describe the development of a novelAE source location technique termed 'Wavelet Transform analysis and Modal Location (WTML)' based on Lamb wave theory and time-frequency analysis that can be used for global monitoring of plate like steel structures. Source location was performed on a steel pipe of 1500 mm long and 220 mm outer diameter with nominal thickness of 5 mm under a planar location test setup using H-N sources. The accuracy of the new technique was compared with other AE source location methods such as the time of arrival (TOA) techniqueand DeltaTlocation. Theresults of the study show that the WTML method produces more accurate location resultscompared with TOA and triple point filtering location methods. The accuracy of the WTML approach is comparable with the deltaT location method but requires no initial acoustic calibration of the structure

Learning and the transformative potential of citizen science.

Science.gov (United States)

Bela, Györgyi; Peltola, Taru; Young, Juliette C; Balázs, Bálint; Arpin, Isabelle; Pataki, György; Hauck, Jennifer; Kelemen, Eszter; Kopperoinen, Leena; Van Herzele, Ann; Keune, Hans; Hecker, Susanne; Suškevičs, Monika; Roy, Helen E; Itkonen, Pekka; Külvik, Mart; László, Miklós; Basnou, Corina; Pino, Joan; Bonn, Aletta

2016-10-01

The number of collaborative initiatives between scientists and volunteers (i.e., citizen science) is increasing across many research fields. The promise of societal transformation together with scientific breakthroughs contributes to the current popularity of citizen science (CS) in the policy domain. We examined the transformative capacity of citizen science in particular learning through environmental CS as conservation tool. We reviewed the CS and social-learning literature and examined 14 conservation projects across Europe that involved collaborative CS. We also developed a template that can be used to explore learning arrangements (i.e., learning events and materials) in CS projects and to explain how the desired outcomes can be achieved through CS learning. We found that recent studies aiming to define CS for analytical purposes often fail to improve the conceptual clarity of CS; CS programs may have transformative potential, especially for the development of individual skills, but such transformation is not necessarily occurring at the organizational and institutional levels; empirical evidence on simple learning outcomes, but the assertion of transformative effects of CS learning is often based on assumptions rather than empirical observation; and it is unanimous that learning in CS is considered important, but in practice it often goes unreported or unevaluated. In conclusion, we point to the need for reliable and transparent measurement of transformative effects for democratization of knowledge production. © 2016 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

Gaseous emissions in pressurized fluidized-bed combustion: Analysis and summary of the pilot experiments

International Nuclear Information System (INIS)

Korpela, T.; Hippinen, I.

1995-01-01

The project connects the experimental data from the projects of pressurised fluidized-bed technology by HUT/EVO. The research objectives are behaviour of sulphur absorbents and reduction of sulphur dioxide emissions, reduction of nitrogen oxide emissions, release of vapour-phase alkali metals and carbon monoxide emissions. Optimal process conditions in relation to minimising the emissions are clarified

Development of a non-radiological air emissions inventory for a nuclear industrial facility

International Nuclear Information System (INIS)

Patnoe, C.A.; Porter, G.V.; Almquist, R.S.

1991-01-01

This paper describes the major issues that impacted the organization and structure of a project for developing a comprehensive non- radiological air emissions inventory for a nuclear weapons facility. The major issues addressed paralleled the development of the inventory project and fall into the following categories: (1) defining the scope of work, (2) developing and managing the air emission inventory project, and (3) field investigations and evaluating operations for air emissions. This paper also describes the lines of communication that were established with state regulators to resolve problems and develop a successful working relationship. This paper illustrates a means to complete a complex air emission inventory with proper organization and cooperation with regulatory agencies. Further, it indicates the need of critical evaluation of project tasks to evaluate their impact on project schedule; it provides a method for implementing a quality assurance program that audits all phases of the emission survey; and it demonstrates a way of effectively managing outside contractors to meet schedule requirements and assure a high quality product. This paper is of value to those undertaking a similar complex air emission survey. 2 refs

Impacts of nationally determined contributions on 2030 global greenhouse gas emissions: uncertainty analysis and distribution of emissions

Science.gov (United States)

Benveniste, Hélène; Boucher, Olivier; Guivarch, Céline; Le Treut, Hervé; Criqui, Patrick

2018-01-01

Nationally Determined Contributions (NDCs), submitted by Parties to the United Nations Framework Convention on Climate Change before and after the 21st Conference of Parties, summarize domestic objectives for greenhouse gas (GHG) emissions reductions for the 2025-2030 time horizon. In the absence, for now, of detailed guidelines for the format of NDCs, ancillary data are needed to interpret some NDCs and project GHG emissions in 2030. Here, we provide an analysis of uncertainty sources and their impacts on 2030 global GHG emissions based on the sole and full achievement of the NDCs. We estimate that NDCs project into 56.8-66.5 Gt CO2eq yr-1 emissions in 2030 (90% confidence interval), which is higher than previous estimates, and with a larger uncertainty range. Despite these uncertainties, NDCs robustly shift GHG emissions towards emerging and developing countries and reduce international inequalities in per capita GHG emissions. Finally, we stress that current NDCs imply larger emissions reduction rates after 2030 than during the 2010-2030 period if long-term temperature goals are to be fulfilled. Our results highlight four requirements for the forthcoming ‘climate regime’: a clearer framework regarding future NDCs’ design, an increasing participation of emerging and developing countries in the global mitigation effort, an ambitious update mechanism in order to avoid hardly feasible decarbonization rates after 2030 and an anticipation of steep decreases in global emissions after 2030.

Thermochemical emission and transformation of chlorinated paraffins in inert and oxidizing atmospheres.

Science.gov (United States)

Xin, Shanzhi; Gao, Wei; Wang, Yawei; Jiang, Guibin

2017-10-01

Chlorinated paraffins (CPs) generally function as flame retardants and plasticizers in various materials. They are most likely to be processed by thermal processes during the entire life cycle. However, data on the formation and emission of CPs during thermal processes are still not fully understood. In this study, we simulated industrial thermal processes to investigate the emission of medium-chain chlorinated paraffins (MCCPs) and short-chain chlorinated paraffins (SCCPs) using commercial CP52 as the feedstock. We found that CP52 decomposed very easily at 210-320 °C. The decomposition of CPs generated large quantities of MCCPs and SCCPs. These remained in the residue at low temperature (∼200 °C) and were gradually released into the gas phase at higher temperatures. MCCPs and SCCPs were not detected in either the residue or the gas phase when the temperature exceeded 400 °C. However, considerable concentrations of aromatic and chlorinated aromatic hydrocarbons (Cl-PAHs) were identified in the gas phase, and they were formed as the amount of SCCPs and MCCPs decreased. Cl-PAHs were dominated by low-chlorinated chlorobenzenes, polychlorinated biphenyls, and polychlorinated naphthalenes. Oxygen promoted the release and decomposition of SCCPs in the gas phase. The results of the present study revealed the release of MCCPs and SCCPs and their synergistic emission with Cl-PAHs when CPs were subjected to heat. This work may also provide data for developing multiple techniques to control the emission of CPs and Cl-PAHs. Copyright © 2017 Elsevier Ltd. All rights reserved.

A study of toxic emissions from a coal-fired power plant utilizing an ESP while demonstrating the ICCT CT-121 FGD Project. Final report

Energy Technology Data Exchange (ETDEWEB)

1994-06-16

The US Department of Energy is performing comprehensive assessments of toxic emissions from eight selected coal-fired electric utility units. This program responds to the Clean Air Act Amendments of 1990, which require the US Environmental Protection Agency (EPA) to evaluate emissions of hazardous air pollutants (HAPs) from electric utility power plants for Potential health risks. The resulting data will be furnished to EPA utility power plants and health risk determinations. The assessment of emissions involves the collection and analysis of samples from the major input, process, and output streams of each of the eight power plants for selected hazardous Pollutants identified in Title III of the Clean Air Act. Additional goals are to determine the removal efficiencies of pollution control subsystems for these selected pollutants and the Concentrations associated with the particulate fraction of the flue gas stream as a function of particle size. Material balances are being performed for selected pollutants around the entire power plant and several subsystems to identify the fate of hazardous substances in each utility system. Radian Corporation was selected to perform a toxics assessment at a plant demonstrating an Innovative Clean Coal Technology (ICCT) Project. The site selected is Plant Yates Unit No. 1 of Georgia Power Company, which includes a Chiyoda Thoroughbred-121 demonstration project.

Energy Consumption and Greenhouse Gas Emissions Resulting From Tourism Travel in an Alpine Setting

Directory of Open Access Journals (Sweden)

Rainer Unger

2016-11-01

Full Text Available Tourism—with its social, economic, and ecological dimensions—can be an important driver of sustainable development of alpine communities. Tourism is essential for local people's incomes and livelihoods, but it can also have a major impact on the local environment, landscape aesthetics, and (mainly through tourist transport global climate change. A project currently underway is developing the Austrian mountain municipality of Alpbach into a role model for competitive and sustainable year-round alpine tourism using an integrated and spatially explicit approach that considers energy demand and supply related to housing, infrastructure, and traffic in the settlement and the skiing area. As the first outcome of the project, this article focuses on the development of the Model of Alpine Tourism and Transportation, a geographic information system–based tool for calculating, in detail, energy consumption and greenhouse gas emissions resulting from travel to a single alpine holiday destination. Analysis results show that it is crucial to incorporate both direct and indirect energy use and emissions as each contributes significantly to the climate impact of travel. The study fills a research gap in carbon impact appraisal studies of tourism transport in the context of alpine tourism at the destination level. Our findings will serve as a baseline for the development of comprehensive policies and agendas promoting the transformation toward sustainable alpine tourism.

Voluntary emission trading potential of Turkey

International Nuclear Information System (INIS)

Ari, İzzet

2013-01-01

Climate change is likely to cause serious market failures, and carbon trading as a market instrument can help correct its negative impacts. The global carbon markets established to combat climate change include regulatory and voluntary markets. Turkey cannot utilise regulatory carbon markets under the Kyoto Protocol. As a result of her unique position in the UNFCCC, some offsetting projects in Turkey have benefitted only voluntary emission trading for the reduction of GHG emissions. Due to on-going climate change negotiation under the UNFCCC, it seems that Turkey will not use the current regulatory carbon markets. Thus, Turkey should promote the use of and participation in voluntary carbon markets. In this article, emission reduction potential via energy efficiency, renewable energy and solid waste management, and corresponding offsetting of credits with their estimated prices is investigated for the period between 2013 and 2020. The emission reduction potential for energy efficiency, renewable energy and solid waste management projects are estimated at 403, 312 and 356 million tons of CO 2 equivalent emissions respectively, totalling 1,071 million tons of CO 2 equivalent. The total revenue of the carbon certificates are estimated in the range of 19,775–33,386 million US Dollars for the same period. -- Highlights: •Turkey has 1,071 million tons GHG emission reduction in three sectors for 2013–2020. •Turkey can only use voluntary emission trading for reduction of GHGs. •Total revenue estimation could be between 19,775 and 33,386 million US Dollars. •Turkey's economy and emissions have been rapidly growing. •Turkey can more easily reduce its emission by using voluntary emission trading

Presentation of the Results from the Project of Making Base Documents for Low-Emission Development Strategy for Croatia Until 2030 with an Outlook to 2050

International Nuclear Information System (INIS)

Jelavic, V.; Delija, V.; Herencic, L.

2016-01-01

Paris Climate Agreement is United Nations' Framework Convention on Climate Change way of encouraging countries to prepare Low-Emission development strategies and shows that climate change require long-term development strategies that support sustainable development, with the purpose of limiting the increase of global temperature to the maximal 2 degrees Celsius by the end of the century. The starting point of EU's policy towards low-emission economy is a goal of reducing greenhouse gas emissions by 80-95 percent by 2050. In accordance with that goal, The European Council adopted a climate-energy framework 2030 in October 2014, which sets a goal of reducing emissions - 40 percent by 2030. It also sets a goal of renewable energy sources share of up to 27 percent and an indicative goal of reducing energy consumption - 27 percent. At this moment, a process of accepting and consultations for regulatory climate-energy framework is taking part, as well as a change of greenhouse gas market directive, distribution of load on countries regulation and calculations of emissions from the sector of Land use, Land-use Change and Forestry (LULUCF) regulation. In 2015, The Ministry of Environment and Energy has started a project of making base documents for Low-Emission Development Strategy until 2030 with an outlook to 2050. This strategy applies to every economy and human activity sector and is especially linked to energy sector, industrial, transport, agriculture, forestry and waste management sectors. In the process of making base documents for the Strategy, a number of scenarios were analysed, models for simulations and optimisation were applied and an integral model for national greenhouse gas projections was developed. The Strategy outlines three scenarios: Reference scenario represents the application of the existing legislation while the other two scenarios present a transition towards low-emission economy: Gradual Transition Scenario (NU1) and Strong Transition Scenario

Aspects related to 'emission trading'

International Nuclear Information System (INIS)

Tutuianu, Ovidiu

1999-01-01

The paper presents the aspects of international GHG (greenhouse gases) emission trading, such as: quality of GHG emission data, possible partners, monitoring activity, market mechanisms and difficulties. The following conclusions are drown: - debates on international trade with GHG emissions are currently in a very early stage; - actions are possible and feasible, particularly after Kyoto Conference, as versatile mechanism (besides the Joint Implementation Projects) which have in view the lowering of the global emission costs in different zones of the planet; - difficulties concerning monitoring, reporting and verification, practically preclude implementing a system of emission trading covering all the GHG, all the sources and reservoirs; - an international viable system of emission trading could initiate with a limited number of participants and consideration of only emission categories easy to be confined and surveyed; - existence of a national market and corresponding institutions for monitoring which could booster an international system development

Technical note: Implementation of prescribed (OFFLEM, calculated (ONLEM, and pseudo-emissions (TNUDGE of chemical species in the Modular Earth Submodel System (MESSy

Directory of Open Access Journals (Sweden)

A. Kerkweg

2006-01-01

Full Text Available We present the submodels OFFLEM, ONLEM, and TNUDGE for the Modular Earth Submodel System (MESSy. Prescribed emissions from input files are handled by OFFLEM. ONLEM deals with online-calculated emissions, i.e., emissions that are calculated during the simulation. The submodel TNUDGE uses the "tracer nudging" technique for pseudo-sources and -sinks. For species with highly uncertain emission fluxes and/or with sufficiently long lifetimes, e.g., CH4, it is common to create such pseudo-fluxes by prescribing the observed mixing ratio of the species at a given boundary (e.g., the mixing ratio of methane at the surface, or the ozone mixing ratio at the tropopause. All three submodels substantially simplify the inclusion of emissions into a model. Specific emissions can easily be switched on or off. New prescribed emissions can be included without rewriting any code. New online emissions only require one additional subroutine containing the new parameterization. A major advantage is that input fields at arbitrary resolution can be used. The problem of incompatible grids between emission data and model is overcome by utilizing the MESSy data import interface. To further simplify the creation of new offline emission data, the preprocessing program EDGAR2NC is provided. EDGAR2NC transforms files from the EDGAR format into the netCDF format which is required by OFFLEM. The presented routines are a part of the community modeling project MESSy and can be made available for use to the atmospheric modeling community.

OPIC Greenhouse Gas Emissions Inventory

Data.gov (United States)

Overseas Private Investment Corporation — Independent analysis details quantifying the greenhouse gas ("GHG") emissions directly attributable to projects to which the Overseas Private Investment Corporation...

Map projections cartographic information systems

CERN Document Server

Grafarend, Erik W

2006-01-01

In the context of Geographical Information Systems (GIS) the book offers a timely review of map projections (sphere, ellipsoid, rotational surfaces) and geodetic datum transformations. For the needs of photogrammetry, computer vision, and remote sensing space projective mappings are reviewed.

SO2 emission scenarios of eastern China

International Nuclear Information System (INIS)

Qi, L.; Hao, J.; Lu, M.

1995-01-01

Under the National Key Project in Eighth Five-year Plan, a study was carried out on forecasting SO 2 emission from coal combustion in China, with a special emphasis on the eastern area. 3 scenarios, i.e. 'Optimistic', 'Pessimistic' and 'Business as Usual' scenarios were developed trying to cover changing scale of coal consumption and SO 2 emission from 1990 to 2020. A 'Top-down' approach was employed, and coal consumption elasticity was defined to project future economic growth and coal consumption. SO 2 emission scenarios were outlined, based on coal consumption, estimated sulfur content level and prospective SO 2 control situation. Emission level for each 1 degree longitude x 1 degree latitude grid cell within eastern China was also estimated to show geographical distribution of SO 2 sources. The results show that SO 2 emission in China will increase rapidly, if the current situation for energy saving and SO 2 control is maintained without improvement; measures enhanced reasonably with economic growth could stop further increase of emission by 2010. Realization of more encouraging objective to keep emission at even below 1990 level needs, however, more stringent options. The share of eastern China in the country's total emission would increase until 2000, while the general changing tendency would principally follow the scenarios of the whole country. 4 refs., 5 figs., 1 tab

76 FR 67400 - Capital Project Management

Science.gov (United States)

2011-11-01

...-0030] RIN 2132-AA92 Capital Project Management AGENCY: Federal Transit Administration (FTA), DOT... extending the comment period on its proposed rule for Capital Project Management to December 2, 2011, to...) proposing to transform the current FTA rule for project management oversight into a discrete set of...

Linking GHG Emission Trading Systems and Markets

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Several different types of links are possible between different GHG-mitigation systems. These include: Linking two or more emission trading schemes so that emissions trading can occur both within and between different schemes ('direct links'); and Linking emission trading systems to registries/mechanisms and systems that generate offsets from project based mechanisms or from direct purchases/transfers of AAUs ('indirect links').

Baseline recommendations for greenhouse gas mitigation projects in the electric power sector

Energy Technology Data Exchange (ETDEWEB)

Kartha, Sivan; Lazarus, Michael [Stockholm Environment Institute/Tellus Institute, Boston, MA (United States); Bosi, Martina [International Energy Agency, Paris, 75 (France)

2004-03-01

The success of the Clean Development Mechanism (CDM) and other credit-based emission trading regimes depends on effective methodologies for quantifying a project's emissions reductions. The key methodological challenge lies in estimating project's counterfactual emission baseline, through balancing the need for accuracy, transparency, and practicality. Baseline standardisation (e.g. methodology, parameters and/or emission rate) can be a means to achieve these goals. This paper compares specific options for developing standardised baselines for the electricity sector - a natural starting point for baseline standardisation given the magnitude of the emissions reductions opportunities. The authors review fundamental assumptions that baseline studies have made with respect to estimating the generation sources avoided by CDM or other emission-reducing projects. Typically, studies have assumed that such projects affect either the operation of existing power plants (the operating margin) or the construction of new generation facilities (the build margin). The authors show that both effects are important to consider and thus recommend a combined margin approach for most projects, based on grid-specific data. They propose a three-category framework, according to projects' relative scale and environmental risk. (Author)

European Union-Emission Trading Scheme: outlook for the chemical industry

International Nuclear Information System (INIS)

Coussy, P.; Alberola, E.

2013-01-01

From 2013, under the European Union Emissions Trading Scheme (EU-ETS), Europe will cap its emissions of nitrous oxide (N 2 O) and per-fluorocarbons (PFC) from the chemical industry. Besides, 336 chemical industry facilities will be forced to limit their emissions at 45.8 million tons of CO 2 per year from 2013 to 2020. At date August 1, 2012, almost 70% of the carbon credits issued by the clean development mechanism (CDM) were carried out mainly through the destruction of hydro-fluorocarbons (HFC-23) (42%) and N 2 O (22%). The contribution of emission reductions through chemical processes in the Joint Implementation (JI) projects is smaller but still amounted to 32% of all projects. From 1 May 2013 the European Union will refuse CDM and JI credits from emission reductions of HFC-23 and N 2 O. The issues of the introduction of the chemical industry in the EU-ETS in the context of low CO 2 prices and limited validity of CDM and JI chemical projects are high. Therefore, domestic CO 2 emissions reductions from energy consumption of the chemistry sector will take a larger share. (authors)

A Unified Method of Finding Laplace Transforms, Fourier Transforms, and Fourier Series. [and] An Inversion Method for Laplace Transforms, Fourier Transforms, and Fourier Series. Integral Transforms and Series Expansions. Modules and Monographs in Undergraduate Mathematics and Its Applications Project. UMAP Units 324 and 325.

Science.gov (United States)

Grimm, C. A.

This document contains two units that examine integral transforms and series expansions. In the first module, the user is expected to learn how to use the unified method presented to obtain Laplace transforms, Fourier transforms, complex Fourier series, real Fourier series, and half-range sine series for given piecewise continuous functions. In…

How is it going? Peformance assessment in major projects

DEFF Research Database (Denmark)

Maylor, Harvey; Johnson, Mark; Turner, Neil

2017-01-01

an enhanced service performance model. This was then tested using a survey and a structural equation model derived. Development of this yielded new classifications but most importantly, provided a more meaningful method for measuring the performance of operational transformation projects. Specifically......Determining the performance of a major project is a challenge for both practitioners and scholars. In the context of operational change projects the challenge is exacerbated by the service-intensive nature of the transformation, temporal disconnects between contracting and delivery and lack...... management in major projects from an OM perspective....

[Carbon emissions and low-carbon regulation countermeasures of land use change in the city and town concentrated area of central Liaoning Province, China].

Science.gov (United States)

Xi, Feng-ming; Liang, Wen-juan; Niu, Ming-fen; Wang, Jiao-yue

2016-02-01

Carbon emissions due to land use change have an important impact on global climate change. Adjustment of regional land use patterns has a great scientific significance to adaptation to a changing climate. Based on carbon emission/absorption parameters suitable for Liaoning Province, this paper estimated the carbon emission of land use change in the city and town concentrated area of central Liaoning Province. The results showed that the carbon emission and absorption were separately 308.51 Tg C and 11.64 Tg C from 1997 to 2010. It meant 3.8% of carbon emission. was offset by carbon absorption. Among the 296.87 Tg C net carbon emission of land use change, carbon emission of remaining land use type was 182.24 Tg C, accounting for 61.4% of the net carbon emission, while the carbon emission of land use transformation was 114.63 Tg C, occupying the rest 38.6% of net carbon emission. Through quantifying the mapping relationship between land use change and carbon emission, it was shown that during 1997-2004 the contributions of remaining construction land (40.9%) and cropland transform ation to construction land (40.6%) to carbon emission were larger, but the greater contributions to carbon absorption came from cropland transformation to forest land (38.6%) and remaining forest land (37.5%). During 2004-2010, the land use types for carbon emission and absorption were the same to the period of 1997-2004, but the contribution of remaining construction land to carbon emission increased to 80.6%, and the contribution of remaining forest land to carbon absorption increased to 71.7%. Based on the carbon emission intensity in different land use types, we put forward the low-carbon regulation countermeasures of land use in two aspects. In carbon emission reduction, we should strict control land transformation to construction land, increase the energy efficiency of construction land, and avoid excessive development of forest land and water. In carbon sink increase, we should

Groups on transformations in Finslerian spaces

International Nuclear Information System (INIS)

Misra, R.B.

1993-01-01

The article first appeared in the Internal Reports of the ICTP in 1981. Since then the topic has attracted a large number of authors and several contributions have been made thereafter. Thus, a previous work of the author is revised and up-dated here including the post-1981 contributions in the field. Infinitesimal transformations defining motions, affine motions, projective motions, conformal transformations and curvature collineations in various types of Finslerian spaces are discussed here. The notation and symbolism used in the paper is mainly based on the author's works. (author). 72 refs

Oxidative aging and secondary organic aerosol formation from simulated wildfire emissions

Science.gov (United States)

C. J. Hennigan; M. A. Miracolo; G. J. Engelhart; A. A. May; Cyle Wold; WeiMin Hao; T. Lee; A. P. Sullivan; J. B. Gilman; W. C. Kuster; J. A. de Gouw; J. L. Collett; S. M. Kreidenweis; A. L. Robinson

2010-01-01

Wildfires are a significant fraction of global biomass burning and a major source of trace gas and particle emissions in the atmosphere. Understanding the air quality and climate implications of wildfires is difficult since the emissions undergo complex transformations due to aging processes during transport away from the source. As part of the third Fire Lab at...

Air Quality Modelling and the National Emission Database

DEFF Research Database (Denmark)

Jensen, S. S.

The project focuses on development of institutional strengthening to be able to carry out national air emission inventories based on the CORINAIR methodology. The present report describes the link between emission inventories and air quality modelling to ensure that the new national air emission...... inventory is able to take into account the data requirements of air quality models...

ACCESS Project: Final Report

Energy Technology Data Exchange (ETDEWEB)

Weller, Heiko [Robert Bosch, LLC, Farmington Hills, MI (United States)

2015-04-01

The ACCESS project addressed the development, testing, and demonstration of the proposed advanced technologies and the associated emission and fuel economy improvement at an engine dynamometer and on a full-scale vehicle. Improve fuel economy by 25% with minimum performance penalties Achieve SULEV level emissions with gasoline Demonstrate multi-mode combustion engine management system

Improved Fourier-transform profilometry

International Nuclear Information System (INIS)

Mao Xianfu; Chen Wenjing; Su Xianyu

2007-01-01

An improved optical geometry of the projected-fringe profilometry technique, in which the exit pupil of the projecting lens and the entrance pupil of the imaging lens are neither at the same height above the reference plane nor coplanar, is discussed and used in Fourier-transform profilometry. Furthermore, an improved fringe-pattern description and phase-height mapping formula based on the improved geometrical generalization is deduced. Employing the new optical geometry, it is easier for us to obtain the full-field fringe by moving either the projector or the imaging device. Therefore the new method offers a flexible way to obtain reliable height distribution of a measured object

Multichannel Dynamic Fourier-Transform IR Spectrometer

Science.gov (United States)

Balashov, A. A.; Vaguine, V. A.; Golyak, Il. S.; Morozov, A. N.; Khorokhorin, A. I.

2017-09-01

A design of a multichannel continuous scan Fourier-transform IR spectrometer for simultaneous recording and analysis of the spectral characteristics of several objects is proposed. For implementing the design, a multi-probe fiber is used, constructed from several optical fibers connected into a single optical connector and attached at the output of the interferometer. The Fourier-transform spectrometer is used as a signal modulator. Each fiber is individually mated with an investigated sample and a dedicated radiation detector. For the developed system, the radiation intensity of the spectrometer is calculated from the condition of the minimum spectral resolution and parameters of the optical fibers. Using the proposed design, emission spectra of a gas-discharge neon lamp have been recorded using a single fiber 1 mm in diameter with a numerical aperture NA = 0.22.

Transforming forest landscape conflicts: the promises and perils of global forest management initiatives such as REDD+

Directory of Open Access Journals (Sweden)

Seth Kane

2018-04-01

Full Text Available Implementation of Reducing Emissions from Deforestation and Forest Degradation (REDD+ is designed to relieve pressure on tropical forests, however, many are concerned that it is a threat to the rights of forest communities. These potential risks need serious attention as earlier studies have shown that the Asia-Pacific region is a forest conflict hotspot, with many economic, environmental and social implications at global (e.g. climate change to local levels (e.g. poverty. Drawing on an analysis of nine case studies from four countries (Cambodia, Myanmar, Nepal and Vietnam this paper examines why and how REDD+ can be a driver for forest conflict and how it also has the potential to simultaneously transform these conflicts. The analytical framework, “sources of impairment”, applied in the study was developed to increase understanding and facilitate the resolution of forest landscape conflicts in a sustainable manner (i.e. transformation. The main findings are that REDD+ can be a source of conflict in the study sites, but also had transformative potential when good practices were followed. For example, in some sites, the REDD+ projects were sources of impairment for forest communities by restricting access to forest resources. However, the research also identified REDD+ projects that enabled the participation of traditionally marginalized groups and built local forest management capacities, leading to strengthened tenure for some forest communities. Similarly, in some countries REDD+ has served as a mechanism to pilot Free, Prior and Informed Consent (FPIC, which will likely have significant impacts in mitigating conflicts by addressing the sources at local to national levels. Based on these findings, there are many reasons to be optimistic that REDD+ can address the underlying causes of forest landscape conflicts, especially when linked with other governance initiatives such as Forest Law Enforcement, Governance and Trade – Voluntary

Coal fired flue gas mercury emission controls

International Nuclear Information System (INIS)

Wu, Jiang; Pan, Weiguo; Cao, Yan; Pan, Weiping

2015-01-01

Mercury (Hg) is one of the most toxic heavy metals, harmful to both the environment and human health. Hg is released into the atmosphere from natural and anthropogenic sources and its emission control has caused much concern. This book introduces readers to Hg pollution from natural and anthropogenic sources and systematically describes coal-fired flue gas mercury emission control in industry, especially from coal-fired power stations. Mercury emission control theory and experimental research are demonstrated, including how elemental mercury is oxidized into oxidized mercury and the effect of flue gas contents on the mercury speciation transformation process. Mercury emission control methods, such as existing APCDs (air pollution control devices) at power stations, sorbent injection, additives in coal combustion and photo-catalytic methods are introduced in detail. Lab-scale, pilot-scale and full-scale experimental studies of sorbent injection conducted by the authors are presented systematically, helping researchers and engineers to understand how this approach reduces the mercury emissions in flue gas and to apply the methods in mercury emission control at coal-fired power stations.

Coal fired flue gas mercury emission controls

Energy Technology Data Exchange (ETDEWEB)

Wu, Jiang; Pan, Weiguo [Shanghai Univ. of Electric Power (China); Cao, Yan; Pan, Weiping [Western Kentucky Univ., Bowling Green, KY (United States)

2015-05-01

Mercury (Hg) is one of the most toxic heavy metals, harmful to both the environment and human health. Hg is released into the atmosphere from natural and anthropogenic sources and its emission control has caused much concern. This book introduces readers to Hg pollution from natural and anthropogenic sources and systematically describes coal-fired flue gas mercury emission control in industry, especially from coal-fired power stations. Mercury emission control theory and experimental research are demonstrated, including how elemental mercury is oxidized into oxidized mercury and the effect of flue gas contents on the mercury speciation transformation process. Mercury emission control methods, such as existing APCDs (air pollution control devices) at power stations, sorbent injection, additives in coal combustion and photo-catalytic methods are introduced in detail. Lab-scale, pilot-scale and full-scale experimental studies of sorbent injection conducted by the authors are presented systematically, helping researchers and engineers to understand how this approach reduces the mercury emissions in flue gas and to apply the methods in mercury emission control at coal-fired power stations.

Quantification of fossil fuel CO2 emissions at the urban scale: Results from the Indianapolis Flux Project (INFLUX)

Science.gov (United States)

Turnbull, J. C.; Cambaliza, M. L.; Sweeney, C.; Karion, A.; Newberger, T.; Tans, P. P.; Lehman, S.; Davis, K. J.; Miles, N. L.; Richardson, S.; Lauvaux, T.; Shepson, P.; Gurney, K. R.; Song, Y.; Razlivanov, I. N.

2012-12-01

Emissions of fossil fuel CO2 (CO2ff) from anthropogenic sources are the primary driver of observed increases in the atmospheric CO2 burden, and hence global warming. Quantification of the magnitude of fossil fuel CO2 emissions is vital to improving our understanding of the global and regional carbon cycle, and independent evaluation of reported emissions is essential to the success of any emission reduction efforts. The urban scale is of particular interest, because ~75% CO2ff is emitted from urban regions, and cities are leading the way in attempts to reduce emissions. Measurements of 14CO2 can be used to determine CO2ff, yet existing 14C measurement techniques require laborious laboratory analysis and measurements are often insufficient for inferring an urban emission flux. This presentation will focus on how 14CO2 measurements can be combined with those of more easily measured ancillary tracers to obtain high resolution CO2ff mixing ratio estimates and then infer the emission flux. A pilot study over Sacramento, California showed strong correlations between CO2ff and carbon monoxide (CO) and demonstrated an ability to quantify the urban flux, albeit with large uncertainties. The Indianapolis Flux Project (INFLUX) aims to develop and assess methods to quantify urban greenhouse gas emissions. Indianapolis was chosen as an ideal test case because it has relatively straightforward meteorology; a contained, isolated, urban region; and substantial and well-known fossil fuel CO2 emissions. INFLUX incorporates atmospheric measurements of a suite of gases and isotopes including 14C from light aircraft and from a network of existing tall towers surrounding the Indianapolis urban area. The recently added CO2ff content is calculated from measurements of 14C in CO2, and then convolved with atmospheric transport models and ancillary data to estimate the urban CO2ff emission flux. Significant innovations in sample collection include: collection of hourly averaged samples to

Dual fuel operation of used transformer oil with acetylene in a DI diesel engine

International Nuclear Information System (INIS)

Behera, Pritinika; Murugan, S.; Nagarajan, G.

2014-01-01

Highlights: • Utilisation of Used transformer oil (UTO) as a fuel in a diesel engine. • UTO with acetylene in a diesel engine, on a dual fuel mode technique. • Analysis of combustion characteristics of the diesel engine. • Analysis of performance and emission characteristics of the diesel engine. - Abstract: Used transformer oil (UTO) is a waste oil obtained from power transformers and welding transformers. It possesses considerable heating value and properties similar to diesel fuel. A preliminary investigation on the utilization of the UTO in a single cylinder, four stroke small powered direct injection (DI) diesel engine revealed that at an optimum injection timing of 20°CA the engine exhibited lower nitric oxide (NO) and higher smoke emissions, compared to that of diesel operation. In order to improve the performance and reduce the smoke emission, a dual fuel operation was attempted in the present investigation. Acetylene was inducted as a primary fuel at four different flow rates viz 132 g/h, 198 g/h, 264 g/h and 330 g/h along with the air, to study the combustion, performance and emission behavior of a four-stroke, 4.4 kW diesel engine, while the UTO was injected as pilot fuel with the optimized injection timing. The experimental results were compared with diesel-acetylene dual fuel operation in the same engine. Acetylene aspiration reduced the ignition delay and maximum cylinder pressure by about 3°CA, and 25% respectively at full load in comparison with the sole UTO operation. Higher thermal efficiency and lower exhaust gas were also observed at full load. Smoke was reduced by about 13.7%, in comparison with the UTO operation at full load

New estimates of direct N2O emissions from Chinese croplands from 1980 to 2007 using localized emission factors

Directory of Open Access Journals (Sweden)

F. S. Zhang

2011-10-01

Full Text Available Nitrous oxide (N2O is a long-lived greenhouse gas with a large radiation intensity and it is emitted mainly from agricultural land. Accurate estimates of total direct N2O emissions from croplands on a country scale are important for global budgets of anthropogenic sources of N2O emissions and for the development of effective mitigation strategies. The objectives of this study were to re-estimate direct N2O emissions using localized emission factors and a database of measurements from Chinese croplands. We obtained N2O emission factors for paddy fields (0.41 ± 0.04% and uplands (1.05 ± 0.02% from a normalization process through cube root transformation of the original data. After comparing the results of normalization from the original values, Logarithmic and cube root transformations were used because the frequency of the original data was not normally distributed. Direct N2O emissions from Chinese croplands from 1980 to 2007 were estimated using IPCC (2006 guidelines combined with separate localized emission factors for paddy fields and upland areas. Direct N2O emissions from paddy fields showed little change, increasing by 10.5% with an annual rate of increase of 0.4% from 32.3 Gg N2O-N in 1980 to 35.7 Gg N2O-N in 2007. In contrast, emissions from uplands changed dramatically, increasing by 308% with an annual rate of 11% from 68.0 Gg N2O-N in 1980 to 278 Gg N2O-N in 2007. Total direct N2O emissions from Chinese croplands increased by 213% with an annual rate of 7.6% from 100 Gg N2O-N in 1980 to 313 Gg N2O-N in 2007, and were determined mainly by upland emissions (accounting for 67.8–88.6% of total emissions from 1980 to 2007. Synthetic N fertilizers played a major role in N2O emissions from agricultural land, and the magnitude of the contributions to total direct N2O emissions made by different amendments was synthetic N fertilizer > manure > straw, representing about 78, 15, and 6% of total direct N2O emissions, respectively, between

Forestry and biomass energy projects

DEFF Research Database (Denmark)

Swisher, J.N.

1994-01-01

This paper presents a comprehensive and consistent methodology to account for the costs and net carbon flows of different categories of forestry and biomass energy projects and describes the application of the methodology to several sets of projects in Latin America. The results suggest that both...... biomass energy development and forestry measures including reforestation and forest protection can contribute significantly to the reduction of global CO2 emissions, and that local land-use capacity must determine the type of project that is appropriate in specific cases. No single approach alone...... is sufficient as either a national or global strategy for sustainable land use or carbon emission reduction. The methodology allows consistent comparisons of the costs and quantities of carbon stored in different types of projects and/or national programs, facilitating the inclusion of forestry and biomass...

Superthermal electron distribution measurements from polarized electron cyclotron emission

International Nuclear Information System (INIS)

Luce, T.C.; Efthimion, P.C.; Fisch, N.J.

1988-06-01

Measurements of the superthermal electron distribution can be made by observing the polarized electron cyclotron emission. The emission is viewed along a constant magnetic field surface. This simplifies the resonance condition and gives a direct correlation between emission frequency and kinetic energy of the emitting electron. A transformation technique is formulated which determines the anisotropy of the distribution and number density of superthermals at each energy measured. The steady-state distribution during lower hybrid current drive and examples of the superthermal dynamics as the runaway conditions is varied are presented for discharges in the PLT tokamak. 15 refs., 8 figs

MEASUREMENT OF FUGITIVE EMISSIONS AT A BIOREACTOR LANDFILL

Science.gov (United States)

This report focuses on three field campaigns performed in 2002 and 2003 to measure fugitive emissions at a bioreactor landfill in Louisville, KY, using an open-path Fourier transform infrared spectrometer. The study uses optical remote sensing-radial plume mapping. The horizontal...

Combustion, Performance, and Emission Evaluation of a Diesel Engine with Biodiesel Like Fuel Blends Derived From a Mixture of Pakistani Waste Canola and Waste Transformer Oils

Directory of Open Access Journals (Sweden)

Muhammad Qasim

2017-07-01

Full Text Available The aim of this work was to study the combustion, performance, and emission characteristics of a 5.5 kW four-stroke single-cylinder water-cooled direct-injection diesel engine operated with blends of biodiesel-like fuel (BLF15, BLF20 & BLF25 obtained from a 50:50 mixture of transesterified waste transformer oil (TWTO and waste canola oil methyl esters (WCOME with petroleum diesel. The mixture of the waste oils was named as biodiesel-like fuel (BLF.The engine fuelled with BLF blends was evaluated in terms of combustion, performance, and emission characteristics. FTIR analysis was carried out to know the functional groups in the BLF fuel. The experimental results revealed the shorter ignition delay and marginally higher brake specific fuel consumption (BSFC, brake thermal efficiency (BTE and exhaust gas temperature (EGT values for BLF blends as compared to diesel. The hydrocarbon (HC and carbon monoxide (CO emissions were decreased by 10.92–31.17% and 3.80–6.32%, respectively, as compared to those of diesel fuel. Smoke opacity was significantly reduced. FTIR analysis has confirmed the presence of saturated alkanes and halide groups in BLF fuel. In comparison to BLF20 and BLF25, the blend BLF15 has shown higher brake thermal efficiency and lower fuel consumption values. The HC, CO, and smoke emissions of BLF15 were found lower than those of petroleum diesel. The fuel blend BLF15 is suggested to be used as an alternative fuel for diesel engines without any engine modification.

Projections of oceanic N2O emissions in the 21st century using the IPSL Earth system model

Science.gov (United States)

Martinez-Rey, J.; Bopp, L.; Gehlen, M.; Tagliabue, A.; Gruber, N.

2015-07-01

The ocean is a substantial source of nitrous oxide (N2O) to the atmosphere, but little is known about how this flux might change in the future. Here, we investigate the potential evolution of marine N2O emissions in the 21st century in response to anthropogenic climate change using the global ocean biogeochemical model NEMO-PISCES. Assuming nitrification as the dominant N2O formation pathway, we implemented two different parameterizations of N2O production which differ primarily under low-oxygen (O2) conditions. When forced with output from a climate model simulation run under the business-as-usual high-CO2 concentration scenario (RCP8.5), our simulations suggest a decrease of 4 to 12 % in N2O emissions from 2005 to 2100, i.e., a reduction from 4.03/3.71 to 3.54/3.56 TgN yr-1 depending on the parameterization. The emissions decrease strongly in the western basins of the Pacific and Atlantic oceans, while they tend to increase above the oxygen minimum zones (OMZs), i.e., in the eastern tropical Pacific and in the northern Indian Ocean. The reduction in N2O emissions is caused on the one hand by weakened nitrification as a consequence of reduced primary and export production, and on the other hand by stronger vertical stratification, which reduces the transport of N2O from the ocean interior to the ocean surface. The higher emissions over the OMZ are linked to an expansion of these zones under global warming, which leads to increased N2O production, associated primarily with denitrification. While there are many uncertainties in the relative contribution and changes in the N2O production pathways, the increasing storage seems unequivocal and determines largely the decrease in N2O emissions in the future. From the perspective of a global climate system, the averaged feedback strength associated with the projected decrease in oceanic N2O emissions amounts to around -0.009 W m-2 K-1, which is comparable to the potential increase from terrestrial N2O sources. However

Null lifts and projective dynamics

Energy Technology Data Exchange (ETDEWEB)

Cariglia, Marco, E-mail: marco@iceb.ufop.br

2015-11-15

We describe natural Hamiltonian systems using projective geometry. The null lift procedure endows the tangent bundle with a projective structure where the null Hamiltonian is identified with a projective conic and induces a Weyl geometry. Projective transformations generate a set of known and new dualities between Hamiltonian systems, as for example the phenomenon of coupling-constant metamorphosis. We conclude outlining how this construction can be extended to the quantum case for Eisenhart–Duval lifts.

Transformations of emotional experience.

Science.gov (United States)

de Cortiñas, Lia Pistiner

2013-06-01

In this paper the author approaches mental pain and the problems in a psychoanalytic treatment of patients with difficulties in the psychic transformation of their emotional experiences. The author is interested in the symbolic failure related to the obstruction of development of phantasies, dreams, dream-thoughts, etc. She differentiates symbolization disturbances related to hypertrophic projective identification from a detention of these primitive communications and emotional isolation. She puts forward the conjecture that one factor in the arrest of this development is the detention of projective identifications and that, when this primitive means of communication is re-established in a container-contained relationship of mutual benefit, this initiates the development of a symbolization process that can replace the pathological 'protection'. Another hypothesis she develops is that of inaccessible caesuras that, associated with the detention of projective identification, obstruct any integrative or interactive movement. This caesura and the detention of projective identifications affect mental functions needed for dealing with mental pain. The personality is left with precarious mental equipment for transforming emotional experiences. How can a psychoanalytical process stimulate the development of creative symbolization, transforming the emotional experiences and leading towards mental growth? The author approaches the clinical problem with the metaphor of the psychic birth of emotional experience. The modulation of mental pain in a container-contained relationship is a central problem for the development of the human mind. For discovering and giving a meaning to emotional experience, the infant depends on reverie, a function necessary in order to develop an evolved consciousness capable of being aware, which is different from the rudimentary consciousness that perceives but does not understand. The development of mature mental equipment is associated with the

Swedish CO2-emissions 1900-2010: an exploratory note

International Nuclear Information System (INIS)

Kristroem, Bengt; Lundgren, Tommy

2005-01-01

This paper projects Swedish CO 2 -emissions during the period 2000-2010 based on data covering 1900-1999. Swedish climate policy is currently based on the assumption that carbon emissions will increase, ceteris paribus, by 5-15% relative to the 1990 level. This forecast has motivated a number of policy measures, including carbon taxes, subsidies and an 'information package'. We find, however, that CO 2 -emissions may well be lower in the future. This outcome is broadly consistent with the literature on the Environmental Kuznets Curve, which portrays the relationship between emissions and GDP. The key contribution of this paper is that our analysis is based on a long time series. Current literature is invariably based on 'short' panel data sets, while we study a single country through several phases of development. Our analysis also sheds some light on the key importance played by nuclear power for carbon emission projections

Identification of individual features in areal surface topography data by means of template matching and the ring projection transform

International Nuclear Information System (INIS)

Senin, Nicola; Moretti, Michele; Blunt, Liam A

2014-01-01

Starting from areal surface topography data as provided by current commercial three-dimensional (3D) profilometers and 3D digital microscopes, this work investigates the problem of automatically identifying and extracting functionally relevant, individual features within the acquisition area. Feature identification is achieved by adopting an original template-matching algorithmic procedure, based on applying the ring projection transform in combination with a parametric template. The proposed algorithmic procedure addresses in particular template-matching scenarios where significant variability may be associated with the features to be compared to the reference template. The algorithm is applied to a test case involving the characterization of the surface texture of a superabrasive polishing tool used in hard-disk manufacturing. (paper)