VIDA - Knowledge-based efforts for socially disadvantaged children in daycare - an inclusive ECEC program

DEFF Research Database (Denmark)

Holm, Anders; Wang, Camilla; Kousholt, Dorte

experiments. Thus the program combines professionals’ personal knowledge and practice-based experiences, i.e. combines tacit knowledge with explicit scientifi c knowledge acquisition and sharing. The VIDA and VIDA+ education programs encourage participants to work with both explicit and implicit (tacit...... intervention program Knowledge-based efforts for socially disadvantaged children in daycare – a model program presented in this report, aims at improving all children’s well-being and cognitive functioning, and specifi cally improving the situation for socially disadvantaged children through inclusive efforts...

Buildings energy management program workshop design. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1978-12-01

This document describes activities undertaken by Honeywell's Energy Resources Center for design and development of the format, content, and materials that were used in conducting 129 one-day energy management workshops for specific commercial business audiences. The Building Energy Management Workshop Program was part of a National Workshop Program that was intended to increase awareness of energy-related issues and to encourage energy-conservation actions on the part of commercial and industrial sectors. The total effort included executive conferences for chief executive officers and other senior management personnel; industrial energy-conservation workshops directed at plant management and engineering personnel; vanpooling workshops designed to inform and encourage business in implementing a vanpooling program for employees; and the building energy-management workshops specifically developed for managers, owners, and operators of office and retail facilities, restaurants, and supermarkets. The total program spanned nearly two years and reached approximately 2,500 participants from all parts of the U.S. A detailed followup evaluation is still being conducted to determine the impact of this program in terms of conservation action undertaken by workshop participants.

1996 Design effort for IFMIF HEBT

International Nuclear Information System (INIS)

Blind, B.

1997-01-01

The paper details the 1996 design effort for the IFMIF HEBT. Following a brief overview, it lists the primary requirements for the beam at the target, describes the design approach and design tools used, introduces the beamline modules, gives the results achieved with the design at this stage, points out possible improvements and gives the names and computer locations of the TRACE3-D and PARMILA files that sum up the design work. The design does not fully meet specifications in regards to the flatness of the distribution at the target. With further work, including if necessary some backup options, the flatness specifications may be realized. It is not proposed that the specifications, namely flatness to ±5% and higher-intensity ridges that are no more than 15% above average, be changed at this time. The design also does not meet the requirement that the modules of all beamlines should operate at the same settings. However, the goal of using identical components and operational procedures has been met and only minor returning is needed to produce very similar beam distributions from all beamlines. Significant further work is required in the following areas: TRACE3-D designs and PARMILA runs must be made for the beams coming from accelerators No. 3 and No. 4. Transport of 30-MeV and 35-MeV beams to the targets and beam dump must be studied. Comprehensive error studies must be made. These must result in tolerance specifications and may require design iterations. Detailed interfacing with target-spot instrumentation is required. This instrumentation must be able to check all aspects of the specifications

12 CFR 906.12 - What outreach efforts are included in this program?

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What outreach efforts are included in this program? 906.12 Section 906.12 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE... Minorities, Women, or Individuals With Disabilities § 906.12 What outreach efforts are included in this...

PyGaze: an open-source, cross-platform toolbox for minimal-effort programming of eyetracking experiments.

Science.gov (United States)

Dalmaijer, Edwin S; Mathôt, Sebastiaan; Van der Stigchel, Stefan

2014-12-01

The PyGaze toolbox is an open-source software package for Python, a high-level programming language. It is designed for creating eyetracking experiments in Python syntax with the least possible effort, and it offers programming ease and script readability without constraining functionality and flexibility. PyGaze can be used for visual and auditory stimulus presentation; for response collection via keyboard, mouse, joystick, and other external hardware; and for the online detection of eye movements using a custom algorithm. A wide range of eyetrackers of different brands (EyeLink, SMI, and Tobii systems) are supported. The novelty of PyGaze lies in providing an easy-to-use layer on top of the many different software libraries that are required for implementing eyetracking experiments. Essentially, PyGaze is a software bridge for eyetracking research.

Cavity design programs

International Nuclear Information System (INIS)

Nelson, E.M.

1996-01-01

Numerous computer programs are available to help accelerator physicists and engineers model and design accelerator cavities and other microwave components. This article discusses the problems these programs solve and the principles upon which these programs are based. Some examples of how these programs are used in the design of accelerator cavities are also given

A Priori Implementation Effort Estimation for HW Design Based on Independent-Path Analysis

DEFF Research Database (Denmark)

Abildgren, Rasmus; Diguet, Jean-Philippe; Bomel, Pierre

2008-01-01

that with the proposed approach it is possible to estimate the hardware implementation effort. This approach, part of our light design space exploration concept, is implemented in our framework ‘‘Design-Trotter'' and offers a new type of tool that can help designers and managers to reduce the time-to-market factor......This paper presents a metric-based approach for estimating the hardware implementation effort (in terms of time) for an application in relation to the number of linear-independent paths of its algorithms. We exploit the relation between the number of edges and linear-independent paths...... in an algorithm and the corresponding implementation effort. We propose an adaptation of the concept of cyclomatic complexity, complemented with a correction function to take designers' learning curve and experience into account. Our experimental results, composed of a training and a validation phase, show...

Building Bridges to Connect the Disconnects: An Analysis of Business Program Design Processes

Science.gov (United States)

Fleming, Debra L.

2008-01-01

The purpose of this study is to analyze current trends of design processes and redesign efforts for business programs. A review of the literature suggests business schools are not preparing graduates of their programs with the necessary knowledge, skills and dispositions as deemed appropriate to succeed in the world of work. Some research studies…

Structural design of superconducting magnets for the large coil program

International Nuclear Information System (INIS)

Gray, W.H.; Long, C.J.; Stoddart, W.C.T.

1979-09-01

The Large Coil Program (LCP) is a research, development, and demonstration effort specifically for the advancement of the technologies involved in the production of large superconducting magnets. This paper presents a review of the status of the structural designs, analysis methods, and verification tests being performed by the participating LCP design teams in the USA, Switzerland, Japan, and the Federal Republic of Germany. The significant structural mechanics concerns that are being investigated with the LCP are presented

Design basis programs and improvements in plant operation

International Nuclear Information System (INIS)

Metcalf, M.F.

1991-01-01

Public Service Electric and Gas (PSE and G) Company operates three commercial nuclear power plants in southern New Jersey. The three plants are of different designs and vintages (two pressurized water reactors licensed in 1976 and 1980 and one boiling water reactor licensed in 1986). As the industry recognized the need to develop design basis programs, PSE and G also realized the need after a voluntary 52-day shutdown of one unit because of electrical design basis problems. In its drive to be a premier electric utility, PSE and G has been aggressively active in developing design basis documents (DBDs) with supporting projects and refined uses to obtain the expected value and see the return on investment. Progress on Salem is nearly 75% complete, while Hope Creek is 20% complete. To data, PSE and G has experienced success in the use of DBDs in areas such as development of plant modifications, development of the reliability-centered maintenance program, procedure upgrades, improved document retrieval, resolution of regulatory issues, and training. The paper examines the design basis development process, supporting projects, and expected improvements in plant operations as a result of these efforts

Hydride heat pump. Volume I. Users manual for HYCSOS system design program. [HYCSOS code

Energy Technology Data Exchange (ETDEWEB)

Gorman, R.; Moritz, P.

1978-05-01

A method for the design and costing of a metal hydride heat pump for residential use and a computer program, HYCSOS, which automates that method are described. The system analyzed is one in which a metal hydride heat pump can provide space heating and space cooling powered by energy from solar collectors and electric power generated from solar energy. The principles and basic design of the system are presented, and the computer program is described giving detailed design and performance equations used in the program. The operation of the program is explained, and a sample run is presented. This computer program is part of an effort to design, cost, and evaluate a hydride heat pump for residential use. The computer program is written in standard Fortran IV and was run on a CDC Cyber 74 and Cyber 174 computer. A listing of the program is included as an appendix. This report is Volume 1 of a two-volume document.

Creel survey sampling designs for estimating effort in short-duration Chinook salmon fisheries

Science.gov (United States)

McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

2013-01-01

Chinook Salmon Oncorhynchus tshawytscha sport fisheries in the Columbia River basin are commonly monitored using roving creel survey designs and require precise, unbiased catch estimates. The objective of this study was to examine the relative bias and precision of total catch estimates using various sampling designs to estimate angling effort under the assumption that mean catch rate was known. We obtained information on angling populations based on direct visual observations of portions of Chinook Salmon fisheries in three Idaho river systems over a 23-d period. Based on the angling population, Monte Carlo simulations were used to evaluate the properties of effort and catch estimates for each sampling design. All sampling designs evaluated were relatively unbiased. Systematic random sampling (SYS) resulted in the most precise estimates. The SYS and simple random sampling designs had mean square error (MSE) estimates that were generally half of those observed with cluster sampling designs. The SYS design was more efficient (i.e., higher accuracy per unit cost) than a two-cluster design. Increasing the number of clusters available for sampling within a day decreased the MSE of estimates of daily angling effort, but the MSE of total catch estimates was variable depending on the fishery. The results of our simulations provide guidelines on the relative influence of sample sizes and sampling designs on parameters of interest in short-duration Chinook Salmon fisheries.

BREED: a CDC-7600 computer program for the automation of breeder reactor design analysis (LWBR Development Program)

International Nuclear Information System (INIS)

Candelore, N.R.; Maher, C.M.

1985-03-01

BREED is an executive CDC-7600 program which was developed to facilitate the sequence of calculations and movement of data through a prescribed series of breeder reactor design computer programs in an uninterrupted single-job mode. It provides the capability to interface different application programs into a single computer run to provide a complete design function. The automation that can be achieved as a result of using BREED significantly reduces not only the time required for data preparation and hand transfer of data, but also the time required to complete an iteration of the total design effort. Data processing within a technical discipline and data transfer between technical disciplines can be accommodated. The input/output data processing is achieved with BREED by using a set of simple, easily understood user commands, usually short descriptive words, which the user inserts in his input deck. The input deck completely identifies and controls the calculational sequence needed to produce a desired end product. This report has been prepared to provide instructional material on the use of BREED and its user-oriented procedures to facilitate computer automation of design calculations

Students' guide to program design

CERN Document Server

Robertson, Lesley Anne

1992-01-01

Students' Guide to Program Design is a textbook on program design. This textbook approaches program design by using structures programming techniques and pseudocode to develop a solution algorithm. Divided into 10 chapters, the book begins with a basic explanation of structured programming techniques, top-down development, and modular design. This discussion is followed by detailed concepts of the syntax of pseudocode; methods of defining the problem; the application of basic control structures in the development of the solution algorithm; desk checking techniques; hierarchy charts; and module

Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice

Energy Technology Data Exchange (ETDEWEB)

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2007-06-01

Increasing levels of financial support for customer-sited photovoltaic (PV) systems, provided through publicly-funded incentive programs, has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in ensuring that PV systems receiving incentives perform well. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address performance issues, and highlight important differences in the implementation of these strategies among programs.

Recommended Resources for Planning to Evaluate Program Improvement Efforts (Including the SSIP)

Science.gov (United States)

National Center for Systemic Improvement at WestEd, 2015

2015-01-01

This document provides a list of recommended existing resources for state Part C and Part B 619 staff and technical assistance (TA) providers to utilize to support evaluation planning for program improvement efforts (including the State Systemic Improvement Plan, SSIP). There are many resources available related to evaluation and evaluation…

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

International Nuclear Information System (INIS)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE's overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program

Structure design of the Westinghouse superconducting magnet for the Large Coil Program

International Nuclear Information System (INIS)

Domeisen, F.N.; Hackworth, D.T.; Stuebinger, L.R.

1978-01-01

In the on-going development of superconducting toroidal field coils for tokamak reactors, the Large Coil Program (LCP) managed by Union Carbide Corporation will include the design, fabrication, and testing of large superconducting coils to determine their feasibility for use in the magnetic fusion energy effort. Structural analysis of the large coil is essential to ensure adequate safety in the test coil design and confidence in the scalability of the design. This paper will discuss the action of tensile and shear loads on the various materials used in the coil. These loads are of magnetic and thermal origin

How Does Bug-Handling Effort Differ Among Different Programming Languages?

OpenAIRE

Zhang, Jie; Li, Feng; Hao, Dan; Wang, Meng; Zhang, Lu

2018-01-01

Handling bugs is an essential part of software development. The impact of programming language on this task has long been a topic of much debate. For example, some people hold the view that bugs in Python are easy to handle because its code is easy to read and understand, while some others believe the absence of static typing in Python will lead to higher bug-handling effort. This paper presents the first large-scale study to investigate whether the ecosystems of different (categories of) pro...

Designing computer programs

CERN Document Server

Haigh, Jim

1994-01-01

This is a book for students at every level who are learning to program for the first time - and for the considerable number who learned how to program but were never taught to structure their programs. The author presents a simple set of guidelines that show the programmer how to design in a manageable structure from the outset. The method is suitable for most languages, and is based on the widely used 'JSP' method, to which the student may easily progress if it is needed at a later stage.Most language specific texts contain very little if any information on design, whilst books on des

NWTS waste package program plan. Volume II. Program logic networks

International Nuclear Information System (INIS)

1981-10-01

This document describes the work planned for developing the technology to design, test and produce packages used for the long-term isolation of nuclear waste in deep geologic repositories. Waste forms considered include spent fuel and high-level waste. The testing and selection effort for barrier materials for radionuclide containment is described. The NWTS waste package program is a design-driven effort; waste package conceptual designs are used as input for preliminary designs, which are upgraded to a final design as materials and testing data become available. Performance assessment models are developed and validated. Milestones and a detailed schedule are given for the waste package development effort. Program logic networks defining work flow, interfaces among the NWTS Projects, and interrelationships of specific activities are presented. Detailed work elements are provided for the Waste Package Program Plan subtasks - design and development, waste form, barrier materials, and performance evaluation - for salt and basalt, host rocks for which the state of waste package knowledge and the corresponding data base are advanced

Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice in the U.S.

Energy Technology Data Exchange (ETDEWEB)

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-10-06

In the U.S., the increasing financial support for customer-sited photovoltaic (PV) systems provided through publicly-funded incentive programs has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in addressing PV system performance. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address factors that affect performance, and describe key implementation details. Based on this review, we then offer recommendations for how PV incentive programs can be effectively designed to mitigate potential performance issues.

A Method for A Priori Implementation Effort Estimation for Hardware Design

DEFF Research Database (Denmark)

Abildgren, Rasmus; Diguet, Jean-Philippe; Gogniat, Guy

2008-01-01

This paper presents a metric-based approach for estimating the hardware implementation effort (in terms of time) for an application in relation to the number of independent paths of its algorithms. We define a metric which exploits the relation between the number of independent paths in an algori...... facilitating designers and managers needs for estimating the time-to-market schedule....

Improving Program Design and Assessment with Broadening Participation Resources

Science.gov (United States)

Siegfried, D.; Johnson, A.; Thomas, S. H.; Fauver, A.; Detrick, L.

2012-12-01

Many theoretical and research-based approaches suggest how to best use mentoring to enhance an undergraduate research program. The Institute for Broadening Participation's Pathways to Engineering and Pathways to Ocean Sciences projects synthesized a set of mentoring studies, theoretical sources, and other texts pertinent to undergraduate research program design into a suite of practical tools that includes an online mentoring manual, an online reference library of mentoring and diversity literature, and practical guides such as Using Social Media to Build Diversity in Your REU. The overall goal is to provide easy-to-access resources that can assist faculty and program directors in implementing or honing the mentoring elements in their research programs for undergraduates. IBP's Online Mentoring Manual addresses common themes, such as modeling, student self-efficacy, career development, retention and evaluation. The Online Diversity Reference Library provides a comprehensive, annotated selection of key policy documents, research studies, intervention studies, and other texts on broadening participation in science, technology, engineering and mathematics. IBP's suite of tools provides the theoretical underpinnings and research findings that can help leaders in education integrate site-appropriate mentoring elements into their educational programs. Program directors and faculty from a variety of program types and disciplines have benefitted from using the Manual and other resources. IBP continues the work of translating and synthesizing theory to practice and welcomes your participation and partnership in that effort.

NWTS waste package program plan. Volume I. Program strategy, description, and schedule

International Nuclear Information System (INIS)

1981-10-01

This document describes the work planned for developing the technology to design, test and produce packages used for the long-term isolation of nuclear waste in deep geologic repositories. Waste forms considered include spent fuel and high-level waste. The testing and selection effort for barrier materials for radionuclide containment is described. The NWTS waste package program is a design-driven effort; waste package conceptual designs are used as input for preliminary designs, which are upgraded to a final design as materials and testing data become available. Performance assessment models are developed and validated. Milestones and a detailed schedule are given for the waste package development effort. Program logic networks defining work flow, interfaces among the NWTS Projects, and interrelationships of specific activities are presented. Detailed work elements are provided for the Waste Package Program Plan subtasks - design and development, waste form, barrier materials, and performance evaluation - for salt and basalt, host rocks for which the state of waste package knowledge and the corresponding data base are advanced

Design of exploration and minerals-data-collection programs in developing areas

Science.gov (United States)

Attanasi, E.D.

1981-01-01

This paper considers the practical problem of applying economic analysis to designing minerals exploration and data collection strategies for developing countries. Formal decision rules for the design of government exploration and minerals-data-collection programs are derived by using a minerals-industry planning model that has been extended to include an exploration function. Rules derived are applicable to centrally planned minerals industries as well as market-oriented minerals sectors. They pertain to the spatial allocation of exploration effort and to the allocation of activities between government and private concerns for market-oriented economies. Programs characterized by uniform expenditures, uniform information coverage across regions, or uniform-density grid drilling progrmas are shown to be inferior to the strategy derived. Moreover, for market-oriented economies, the economically optimal mix in exploration activities between private and government data collection would require that only private firms assess local sites and that government agencies carry out regional surveys. ?? 1981.

Maximizing DOE R and D efforts in tru waste management learning from international programs

International Nuclear Information System (INIS)

Saxman, P.A.; Loughead, J.S.C.

1990-01-01

Through the International Technology Exchange Program, Department of Energy (DOE) technical specialists maintain a formal dialogue with research and Development (R and D) specialists from nuclear programs in other countries. The objective of these exchanges is to seek innovative waste management solutions, maximize progress for ongoing R and D activities, and minimize the development time required for implementation of transuranic (TRU) waste processing technologies and waste assay developments. Based on information provided by PNC during the exchange, DOE specialists evaluated PNC's efforts to implement technologies and techniques from their R and D program activities. This paper presents several projects with particular potential for DOE operations, and suggests several ways that these concepts could be used to advantage by DOE or commercial programs

Integrating design science theory and methods to improve the development and evaluation of health communication programs.

Science.gov (United States)

Neuhauser, Linda; Kreps, Gary L

2014-12-01

Traditional communication theory and research methods provide valuable guidance about designing and evaluating health communication programs. However, efforts to use health communication programs to educate, motivate, and support people to adopt healthy behaviors often fail to meet the desired goals. One reason for this failure is that health promotion issues are complex, changeable, and highly related to the specific needs and contexts of the intended audiences. It is a daunting challenge to effectively influence health behaviors, particularly culturally learned and reinforced behaviors concerning lifestyle factors related to diet, exercise, and substance (such as alcohol and tobacco) use. Too often, program development and evaluation are not adequately linked to provide rapid feedback to health communication program developers so that important revisions can be made to design the most relevant and personally motivating health communication programs for specific audiences. Design science theory and methods commonly used in engineering, computer science, and other fields can address such program and evaluation weaknesses. Design science researchers study human-created programs using tightly connected build-and-evaluate loops in which they use intensive participatory methods to understand problems and develop solutions concurrently and throughout the duration of the program. Such thinking and strategies are especially relevant to address complex health communication issues. In this article, the authors explore the history, scientific foundation, methods, and applications of design science and its potential to enhance health communication programs and their evaluation.

Model design for Large-Scale Seismic Test Program at Hualien, Taiwan

International Nuclear Information System (INIS)

Tang, H.T.; Graves, H.L.; Chen, P.C.

1991-01-01

The Large-Scale Seismic Test (LSST) Program at Hualien, Taiwan, is a follow-on to the soil-structure interaction (SSI) experiments at Lotung, Taiwan. The planned SSI studies will be performed at a stiff soil site in Hualien, Taiwan, that historically has had slightly more destructive earthquakes in the past than Lotung. The LSST is a joint effort among many interested parties. Electric Power Research Institute (EPRI) and Taipower are the organizers of the program and have the lead in planning and managing the program. Other organizations participating in the LSST program are US Nuclear Regulatory Commission (NRC), the Central Research Institute of Electric Power Industry (CRIEPI), the Tokyo Electric Power Company (TEPCO), the Commissariat A L'Energie Atomique (CEA), Electricite de France (EdF) and Framatome. The LSST was initiated in January 1990, and is envisioned to be five years in duration. Based on the assumption of stiff soil and confirmed by soil boring and geophysical results the test model was designed to provide data needed for SSI studies covering: free-field input, nonlinear soil response, non-rigid body SSI, torsional response, kinematic interaction, spatial incoherency and other effects. Taipower had the lead in design of the test model and received significant input from other LSST members. Questions raised by LSST members were on embedment effects, model stiffness, base shear, and openings for equipment. This paper describes progress in site preparation, design and construction of the model and development of an instrumentation plan

Program Theory for Participatory Design

DEFF Research Database (Denmark)

Bossen, Claus; Dindler, Christian; Iversen, Ole Sejer

2018-01-01

How does participatory design work and what are the links between investments in terms of time, people and skills, the processes and the resulting effects? This paper explores program theory as a way for Participatory Design (PD) to investigate and evaluate these issues. Program theory comes out...

Utilizing Design Information in Aspect-Oriented Programming

OpenAIRE

Nagy, I.; Bergmans, Lodewijk; Havinga, W.K.; Aksit, Mehmet; Hirschfeld, Robert; Kowalczyk, Ryszard; Polze, Andreas; Weske, Mathias

2005-01-01

Traditionally in aspect-oriented languages, pointcut designators select joinpoints of a program based on lexical information such as explicit names of program elements. However, this reduces the adaptability of software, since it involves too much information that is hard-coded, and often implementationspecific. We claim that this problem can be reduced by referring to program units through their design intentions. Design intention is represented by annotated design information, which describ...

DOD's advanced thermionics program an overview

International Nuclear Information System (INIS)

Drake, T.R.

1998-01-01

The Defense Special Weapons Agency (DSWA) manages a congressionally mandated program in advanced thermionics research. Guided by congressional language to advance the state-of-the-art in the US and support the Integrated Solar Upper Stage (ISUS) program, DSWA efforts concentrate on four areas: an electrically testable design of a high-performance, in-core thermionic fuel element (TFE), the ISUS program, a microminiature thermionic converter and several modeling efforts. The DSWA domestic program is augmented by several small contracts with Russian institutes, awarded under the former TOPAZ International Program that the Ballistic Missile Defense Organization transferred to DSWA. The design effort at General Atomics will result in an electrically testable, multi-cell TFE for in-core conversion, involving system design and advanced collector and emitter technologies. For the ISUS program, DSWA funded a portion of the engine ground demonstration, including development of the power management system and the planar diodes. Current efforts supporting ISUS include continued diode testing and developing an advanced planar diode. The MTC program seeks to design a mass producable, close-spaced thermionic converter using integrated circuit technologies. Modeling and analysis at DSWA involves development of the Reactor System Mass with Thermionics estimation model (RSMASS-T), developing a new thermionic theory, and reviewing applications for the MTC technology. The Russian deliverables include several reports and associated hardware that describe many of its state-of-the-art thermionic technologies and processes

Incorporating Reporting Efforts to Manage and Improve Health and Wellness Programs.

Science.gov (United States)

Wells, Timothy S; Ozminkowski, Ronald J; McGinn, Michael P; Hawkins, Kevin; Bhattarai, Gandhi R; Serxner, Seth A; Greame, Chris

2017-06-01

Wellness programs are designed to help individuals maintain or improve their health. This article describes how a reporting process can be used to help manage and improve a wellness program. Beginning in 2014, a wellness pilot program became available in New Jersey for individuals with an AARP Medicare Supplement Insurance plan insured by UnitedHealthcare Insurance Company. The program has since expanded to include Missouri, Texas, Alabama, and Washington. This wellness program includes an online health portal, one-on-one telephonic coaching, gym membership discounts, and local health events. To assure smooth program operations and alignment with program objectives, weekly and monthly reports are produced. The weekly report includes metrics on member engagement and utilization for the aforementioned 4 program offerings and reports on the last 4 weeks, as well as for the current month and the current year to date. The monthly report includes separate worksheets for each state and a summary worksheet that includes all states combined, and provides metrics on overall engagement as well as utilization of the 4 program components. Although the monthly reports were used to better manage the 4 program offerings, the weekly reports help management to gauge response to program marketing. Reporting can be a data-driven management tool to help manage wellness programs. Reports provide rapid feedback regarding program performance. In contrast, in-depth program evaluations serve a different purpose, such as to report program-related savings, return on investment, or to report other longer term program-related outcomes.

Inpo/industry job and task analysis efforts

International Nuclear Information System (INIS)

Wigley, W.W.

1985-01-01

One of the goals of INPO is to develop and coordinate industrywide programs to improve the education, training and qualification of nuclear utility personnel. To accomplish this goal, INPO's Training and Education Division: conducts periodic evaluations of industry training programs; provides assistance to the industry in developing training programs; manages the accreditation of utility training programs. These efforts are aimed at satisfying the need for training programs for nuclear utility personnel to be performance-based. Performance-based means that training programs provide an incumbent with the skills and knowledge required to safely perform the job. One of the ways that INPO has provided assistance to the industry is through the industrywide job and task analysis effort. I will discuss the job analysis and task analysis processes, the current status of JTA efforts, JTA products and JTA lessons learned

Integrating computer programs for engineering analysis and design

Science.gov (United States)

Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

1983-01-01

The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

Double degree master program: Optical Design

Science.gov (United States)

Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

2015-10-01

Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

System 80+trademark Standard Design: CESSAR design certification

International Nuclear Information System (INIS)

1990-01-01

This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program

Fuel channel in-service inspection programs program design for maximum cost effectiveness

International Nuclear Information System (INIS)

Van den Brekel, N.C.

1995-01-01

Inspection is an integral part of fuel channel life management strategy. Inspection data is used to assess the state of reactor core integrity and provide the information necessary to optimize long term maintenance programs. This paper will provide an overview of the structured approach to developing fuel channel inspection programs within OHN. The inspection programs are designed to balance the resources utilized (cost, outage time, and dose expenditure) with the benefits provided by the inspection data obtained (improved knowledge of component status, degradation mechanisms and rates, etc..). The CANDU community has yet to have a fuel channel operate for a full 30 year design life. Since research programs can not fully simulate reactor operating conditions, inspections become an essential feature of the life management strategy as the components age. Inspection programs often include activities designed to develop predictive capability for long term fuel channel behaviour and provide early warning of changes in behaviour. It should be noted that although this paper addresses the design of fuel channel inspection programs, the basic principles presented can be applied to the design of inspection programs for any major power plant component or system. (author)

A traditional and a less-invasive robust design: choices in optimizing effort allocation for seabird population studies

Science.gov (United States)

Converse, S.J.; Kendall, W.L.; Doherty, P.F.; Naughton, M.B.; Hines, J.E.; Thomson, David L.; Cooch, Evan G.; Conroy, Michael J.

2009-01-01

For many animal populations, one or more life stages are not accessible to sampling, and therefore an unobservable state is created. For colonially-breeding populations, this unobservable state could represent the subset of adult breeders that have foregone breeding in a given year. This situation applies to many seabird populations, notably albatrosses, where skipped breeders are either absent from the colony, or are present but difficult to capture or correctly assign to breeding state. Kendall et al. have proposed design strategies for investigations of seabird demography where such temporary emigration occurs, suggesting the use of the robust design to permit the estimation of time-dependent parameters and to increase the precision of estimates from multi-state models. A traditional robust design, where animals are subject to capture multiple times in a sampling season, is feasible in many cases. However, due to concerns that multiple captures per season could cause undue disturbance to animals, Kendall et al. developed a less-invasive robust design (LIRD), where initial captures are followed by an assessment of the ratio of marked-to-unmarked birds in the population or sampled plot. This approach has recently been applied in the Northwestern Hawaiian Islands to populations of Laysan (Phoebastria immutabilis) and black-footed (P. nigripes) albatrosses. In this paper, we outline the LIRD and its application to seabird population studies. We then describe an approach to determining optimal allocation of sampling effort in which we consider a non-robust design option (nRD), and variations of both the traditional robust design (RD), and the LIRD. Variations we considered included the number of secondary sampling occasions for the RD and the amount of total effort allocated to the marked-to-unmarked ratio assessment for the LIRD. We used simulations, informed by early data from the Hawaiian study, to address optimal study design for our example cases. We found that

Natural Programming: Project Overview and Proposal

National Research Council Canada - National Science Library

Myers, Brad

1998-01-01

.... The Natural Programming Project is developing general principles, methods, and programming language designs that will significantly reduce the amount of learning and effort needed to write programs...

Designing chemical soil characterization programs for mixed waste sites

International Nuclear Information System (INIS)

Meyers, K.A. Jr.

1989-01-01

The Weldon Spring Site Remedial Action Project is a remedial action effort funded by the U.S. Department of Energy. The Weldon Spring Site, a former uranium processing facility, is located in east-central Missouri on a portion of a former ordnance works facility which produced trinitrotoluene during World War II. As a result of both uranium and ordnance production, the soils have become both radiologically and chemically contaminated. As a part of site characterization efforts in support of the environmental documentation process, a chemical soil characterization program was developed. This program consisted of biased and unbiased sampling program which maximized areal coverage, provided a statistically sound data base and maintained cost effectiveness. This paper discusses how the general rationale and processes used at the Weldon Spring Site can be applied to other mixed and hazardous waste sites

Market Aspects of an Interior Design Program.

Science.gov (United States)

Gold, Judy E.

A project was conducted to evaluate a proposed interior design program in order to determine the marketability (job availability in the field of interior design and home furnishings merchandising) and the feasibility (educational requirements for entrance into the interior design and home furnishings merchandising job market) of the program. To…

Sustainable design guidelines to support the Washington State ferries terminal design manual : design guideline application and refinement.

Science.gov (United States)

2013-08-01

The Sustainable Design Guidelines were developed in Phase I of this research program (WA-RD : 816.1). Here we are reporting on the Phase II effort that beta-tested the Phase I Guidelines on : example ferry terminal designs and refinements made ...

Effectiveness of a grant program's efforts to promote synergy within its funded initiatives: perceptions of participants of the Southern Rural Access Program

Science.gov (United States)

Pathman, Donald E; Chuang, Emmeline; Weiner, Bryan J

2008-01-01

Background Foundations and public agencies commonly fund focused initiatives for individual grantees. These discrete, stand-alone initiatives can risk failure by being carried out in isolation. Fostering synergy among grantees' initiatives is one strategy proposed for promoting the success and impact of grant programs. We evaluate an explicit strategy to build synergy within the Robert Wood Johnson Foundation's Southern Rural Access Program (SRAP), which awarded grants to collaboratives within eight southeastern U.S. states to strengthen basic health care services in targeted rural counties. Methods We interviewed 39 key participants of the SRAP, including the program director within each state and the principal subcontractors heading the program's funded initiatives that supported heath professionals' recruitment, retention and training, made loans to health care providers, and built networks among providers. Interews were recorded and transcribed. Two investigators independently coded the transcripts and a third investigator distilled the main points. Results Participants generally perceived that the SRAP yielded more synergies than other grant programs in which they had participated and that these synergies added to the program's impact. The synergies most often noted were achieved through relationship building among grantees and with outside agencies, sharing information and know-how, sharing resources, combining efforts to yield greater capacity, joining voices to advocate for common goals, and spotting gaps in services offered and then filling these gaps. The SRAP's strategies that participants felt fostered synergy included targeting funding to culturally and geographically similar states, supporting complementary types of initiatives, promoting opportunities to network through semi-annual meetings and regular conference calls, and the advocacy efforts of the program's leadership. Participants noted that synergies were sometimes hindered by turf issues and

Effectiveness of a grant program's efforts to promote synergy within its funded initiatives: perceptions of participants of the Southern Rural Access Program

Directory of Open Access Journals (Sweden)

Weiner Bryan J

2008-12-01

Full Text Available Abstract Background Foundations and public agencies commonly fund focused initiatives for individual grantees. These discrete, stand-alone initiatives can risk failure by being carried out in isolation. Fostering synergy among grantees' initiatives is one strategy proposed for promoting the success and impact of grant programs. We evaluate an explicit strategy to build synergy within the Robert Wood Johnson Foundation's Southern Rural Access Program (SRAP, which awarded grants to collaboratives within eight southeastern U.S. states to strengthen basic health care services in targeted rural counties. Methods We interviewed 39 key participants of the SRAP, including the program director within each state and the principal subcontractors heading the program's funded initiatives that supported heath professionals' recruitment, retention and training, made loans to health care providers, and built networks among providers. Interews were recorded and transcribed. Two investigators independently coded the transcripts and a third investigator distilled the main points. Results Participants generally perceived that the SRAP yielded more synergies than other grant programs in which they had participated and that these synergies added to the program's impact. The synergies most often noted were achieved through relationship building among grantees and with outside agencies, sharing information and know-how, sharing resources, combining efforts to yield greater capacity, joining voices to advocate for common goals, and spotting gaps in services offered and then filling these gaps. The SRAP's strategies that participants felt fostered synergy included targeting funding to culturally and geographically similar states, supporting complementary types of initiatives, promoting opportunities to network through semi-annual meetings and regular conference calls, and the advocacy efforts of the program's leadership. Participants noted that synergies were sometimes

A Topological Model for Parallel Algorithm Design

Science.gov (United States)

1991-09-01

effort should be directed to planning, requirements analysis, specification and design, with 20% invested into the actual coding, and then the final 40...be olle more language to learn. And by investing the effort into improving the utility of ai, existing language instead of creating a new one, this...193) it abandons the notion of a process as a fundemental concept of parallel program design and that it facilitates program derivation by rigorously

Methodological Framework for Analysis of Buildings-Related Programs: The GPRA Metrics Effort

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas B.; Anderson, Dave M.; Belzer, David B.; Cort, Katherine A.; Dirks, James A.; Hostick, Donna J.

2004-06-18

The requirements of the Government Performance and Results Act (GPRA) of 1993 mandate the reporting of outcomes expected to result from programs of the Federal government. The U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE) develops official metrics for its 11 major programs using its Office of Planning, Budget Formulation, and Analysis (OPBFA). OPBFA conducts an annual integrated modeling analysis to produce estimates of the energy, environmental, and financial benefits expected from EERE’s budget request. Two of EERE’s major programs include the Building Technologies Program (BT) and Office of Weatherization and Intergovernmental Program (WIP). Pacific Northwest National Laboratory (PNNL) supports the OPBFA effort by developing the program characterizations and other market information affecting these programs that is necessary to provide input to the EERE integrated modeling analysis. Throughout the report we refer to these programs as “buildings-related” programs, because the approach is not limited in application to BT or WIP. To adequately support OPBFA in the development of official GPRA metrics, PNNL communicates with the various activities and projects in BT and WIP to determine how best to characterize their activities planned for the upcoming budget request. PNNL then analyzes these projects to determine what the results of the characterizations would imply for energy markets, technology markets, and consumer behavior. This is accomplished by developing nonintegrated estimates of energy, environmental, and financial benefits (i.e., outcomes) of the technologies and practices expected to result from the budget request. These characterizations and nonintegrated modeling results are provided to OPBFA as inputs to the official benefits estimates developed for the Federal Budget. This report documents the approach and methodology used to estimate future energy, environmental, and financial benefits

NASA's explorer school and spaceward bound programs: Insights into two education programs designed to heighten public support for space science initiatives

Science.gov (United States)

Allner, Matthew; McKay, Christopher P; Coe, Liza; Rask, Jon; Paradise, Jim; Wynne, J. Judson

2010-01-01

IntroductionNASA has played an influential role in bringing the enthusiasm of space science to schools across the United States since the 1980s. The evolution of this public outreach has led to a variety of NASA funded education programs designed to promote student interest in science, technology, engineering, math, and geography (STEM-G) careers.PurposeThis paper investigates the educational outreach initiatives, structure, and impact of two of NASA's largest educational programs: the NASA Explorer School (NES) and NASA Spaceward Bound programs.ResultsSince its induction in 2003 the NES program has networked and provided resources to over 300 schools across the United States. Future directions include further development of mentor schools for each new NES school selected, while also developing a longitudinal student tracking system for NES students to monitor their future involvement in STEM-G careers. The Spaceward Bound program, now in its third year of teacher outreach, is looking to further expand its teacher network and scientific collaboration efforts, while building on its teacher mentorship framework.

Designing, testing, and implementing a sustainable nurse home visiting program: right@home.

Science.gov (United States)

Goldfeld, Sharon; Price, Anna; Kemp, Lynn

2018-05-01

Nurse home visiting (NHV) offers a potential platform to both address the factors that limit access to services for families experiencing adversity and provide effective interventions. Currently, the ability to examine program implementation is hampered by a lack of detailed description of actual, rather than expected, program development and delivery in published studies. Home visiting implementation remains a black box in relation to quality and sustainability. However, previous literature would suggest that efforts to both report and improve program implementation are vital for NHV to have population impact and policy sustainability. In this paper, we provide a case study of the design, testing, and implementation of the right@home program, an Australian NHV program and randomized controlled trial. We address existing gaps related to implementation of NHV programs by describing the processes used to develop the program to be trialed, summarizing its effectiveness, and detailing the quality processes and implementation evaluation. The weight of our evidence suggests that NHV can be a powerful and sustainable platform for addressing inequitable outcomes, particularly when the program focuses on parent engagement and partnership, delivers evidence-based strategies shown to improve outcomes, includes fidelity monitoring, and is adapted to and embedded within existing service delivery systems. © 2018 The Authors. Annals of the New York Academy of Sciences published by Wiley Periodicals, Inc. on behalf of The New York Academy of Sciences.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide. Final Report

International Nuclear Information System (INIS)

Pelaccio, D.G.; Scheil, C.M.; Petrosky, L.J.

1993-03-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner

Structured Design Language for Computer Programs

Science.gov (United States)

Pace, Walter H., Jr.

1986-01-01

Box language used at all stages of program development. Developed to provide improved productivity in designing, coding, and maintaining computer programs. BOX system written in FORTRAN 77 for batch execution.

Electronic automation of LRFD design programs.

Science.gov (United States)

2010-03-01

The study provided electronic programs to WisDOT for designing pre-stressed girders and piers using the Load : Resistance Factor Design (LRFD) methodology. The software provided is intended to ease the transition to : LRFD for WisDOT design engineers...

Maine's Employability Skills Program

Science.gov (United States)

McMahon, John M.; Wolffe, Karen E.; Wolfe, Judy; Brooker, Carrie

2013-01-01

This Practice Report describes the development and implementation of the "Maine Employability Skills Program," a model employment program developed by the Maine Division for the Blind and Visually Impaired (DBVI). The program was designed to support the efforts of the chronically unemployed or underemployed. These consumers were either…

APS Education and Diversity Efforts

Science.gov (United States)

Prestridge, Katherine; Hodapp, Theodore

2015-11-01

American Physical Society (APS) has a wide range of education and diversity programs and activities, including programs that improve physics education, increase diversity, provide outreach to the public, and impact public policy. We present the latest programs spearheaded by the Committee on the Status of Women in Physics (CSWP), with highlights from other diversity and education efforts. The CSWP is working to increase the fraction of women in physics, understand and implement solutions for gender-specific issues, enhance professional development opportunities for women in physics, and remedy issues that impact gender inequality in physics. The Conferences for Undergraduate Women in Physics, Professional Skills Development Workshops, and our new Professional Skills program for students and postdocs are all working towards meeting these goals. The CSWP also has site visit and conversation visit programs, where department chairs request that the APS assess the climate for women in their departments or facilitate climate discussions. APS also has two significant programs to increase participation by underrepresented minorities (URM). The newest program, the APS National Mentoring Community, is working to provide mentoring to URM undergraduates, and the APS Bridge Program is an established effort that is dramatically increasing the number of URM PhDs in physics.

Development of design program for air handling units

Energy Technology Data Exchange (ETDEWEB)

Ham, J. K.; Kim, J. H.; Kim, Y. K.; Kim, Y. I.; Kang, P. Y. [Hyundai Heavy Industries Co., Ltd., Ulsan (Korea, Republic of)

2000-07-01

An Air Handling Unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the Graphic User Interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail.

Development of design program for air handling units

International Nuclear Information System (INIS)

Ham, J. K.; Kim, J. H.; Kim, Y. K.; Kim, Y. I.; Kang, P. Y.

2000-01-01

An Air Handling Unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the Graphic User Interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail

Development of design program for air handling units

Energy Technology Data Exchange (ETDEWEB)

Ham, J.K.; Kim, J.H.; Kim, Y.K.; Kim, Y.I.; Kang, P.Y. [Hyundai Heavy Industries Co., Ltd. (Korea)

2000-11-01

An air handling unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the graphic user interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a Auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail. (author). 5 refs., 9 figs., 3 tabs.

Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

Directory of Open Access Journals (Sweden)

Bryanna Hahn Fox

2012-12-01

Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

Systems Engineering Force XXI: Experimental Analysis Integration and Systems Engineering Support to the Force XXI Design Effort

National Research Council Canada - National Science Library

Brock, H

1996-01-01

.... Effective needs are critical because the definition of a successful design effort is meeting or exceeding the effective needs of the client or stakeholder group in a cost-effective, high-quality way...

Programming languages for circuit design.

Science.gov (United States)

Pedersen, Michael; Yordanov, Boyan

2015-01-01

This chapter provides an overview of a programming language for Genetic Engineering of Cells (GEC). A GEC program specifies a genetic circuit at a high level of abstraction through constraints on otherwise unspecified DNA parts. The GEC compiler then selects parts which satisfy the constraints from a given parts database. GEC further provides more conventional programming language constructs for abstraction, e.g., through modularity. The GEC language and compiler is available through a Web tool which also provides functionality, e.g., for simulation of designed circuits.

Computer Aided Design System for Developing Musical Fountain Programs

Institute of Scientific and Technical Information of China (English)

刘丹; 张乃尧; 朱汉城

2003-01-01

A computer aided design system for developing musical fountain programs was developed with multiple functions such as intelligent design, 3-D animation, manual modification and synchronized motion to make the development process more efficient. The system first analyzed the music form and sentiment using many basic features of the music to select a basic fountain program. Then, this program is simulated with 3-D animation and modified manually to achieve the desired results. Finally, the program is transformed to a computer control program to control the musical fountain in time with the music. A prototype system for the musical fountain was also developed. It was tested with many styles of music and users were quite satisfied with its performance. By integrating various functions, the proposed computer aided design system for developing musical fountain programs greatly simplified the design of the musical fountain programs.

Has Malaysia's antidrug effort been effective?

Science.gov (United States)

Scorzelli, J F

1992-01-01

It is a common belief that a massive effort in law enforcement, preventive education and rehabilitation will result in the elimination of a country's drug problem. Based on this premise. Malaysia in 1983 implemented such a multifaceted anti-drug strategy, and the results of a 1987 study by the author suggested that Malaysia's effort had begun to contribute to a steady decrease in the number of identified drug abusers. Although the number of drug-addicted individuals declined, the country's recidivism rates were still high. Because of this high relapse rate, Malaysia expanded their rehabilitation effort and developed a community transition program. In order to determine the impact of these changes on the country's battle against drug abuse, a follow-up study was conducted in 1990. The results of this study did not clearly demonstrate that the Malaysian effort had been successful in eliminating the problem of drug abuse, and raised some questions concerning the effectiveness of the country's drug treatment programs.

Pitfalls in Designing Zero-Effort Deauthentication: Opportunistic Human Observation Attacks

OpenAIRE

Huhta, O.; Shrestha, P.; Udar, S.; Juuti, M.; Saxena, N.; Asokan, N.

2015-01-01

VK: Asokan, N. Deauthentication is an important component of any authentication system. The widespread use of computing devices in daily life has underscored the need for zero-effort deauthentication schemes. However, the quest for eliminating user effort may lead to hidden security flaws in the authentication schemes. As a case in point, we investigate a prominent zero-effort deauthentication scheme, called ZEBRA, which provides an interesting and a useful solution to a difficult problem ...

Paddy farmer households’ participation and food security level in special effort program in Seputih Raman sub-district of Central Lampung Regency

Science.gov (United States)

Rangga, K. K.; Syarief, Y. A.

2018-03-01

The objectives of this study are to study the participation of paddy farmers in the Special Effort program to increase paddy production, to study the level of household food security of paddy farmers, and to analyze the correlation between farmer participation and food security level of paddy farmers. The location was chosen purposively in Seputih Raman sub-district. The data were collected from December 2016 to February 2017. The population of this study was paddy farmers who participating in Special Effort program. The hypothesis was tested by using Spearman’s Rank correlation test. Farmer household’s food security was measured objectively based on the share of household’s food expenditure and subjectively based on the opinion, views, and attitudes or farmers’ opinions on food availability, food distribution, and household food consumption. This research showed that farmers’ participation in Special Effort program in Seputih Raman Sub Ditrict, Central Lampung Regency belonged to medium classification, household food security either objectively or subjectively was in food resistant condition of medium classification, and there was significant correlation between farmers’ participation and food security level of paddy farmer household.

Candu Energy's Aging and Obsolescence Program and its Application to Operating Facilities and New Plant Design

International Nuclear Information System (INIS)

Dam, R.; Gold, R.; McCrea, L.

2012-01-01

While plant aging is inevitable, predictable and 'graceful 'aging' behavior can be achieved through the implementation of a comprehensive and integrated Plant Life Management (PLiM) program. Despite organizations like the IAEA and INPO placing more emphasis on equipment reliability, there is still a lack of completely integrated programs in the industry as evidenced by: - Piece-meal, often crisis-driven, implementation comprising many different, partial solutions; - Duplication of effort often seen when different groups work in 'silos'. A strategy which fits with existing plant processes and programs, and which coordinates a broad range of equipment reliability activities is key to achieving the desired results. An example of such a program is the Aging and Obsolescence Program (AOP). AOP follows application of INPO AP-913 guidance for equipment reliability. The program is augmented to include single point vulnerability identification, unified approach to short and long lived components, risk management, spare parts management, and the identification and resolution of obsolescence issues. The systematic nature of the program provides the needed foundation to old and new stations alike. For existing operating stations some of the key uses include outage interval extension, reduced forced outages, and/or outage time reduction, any of which can translate into improving plant performance, competitiveness, and significant dollars saved. Program elements applied to new plant design are commensurate with the industry direction to 'design for reliability', and has allowed Candu Energy to learn and to improve upon what it can offer to operating stations. This paper intends to describe the basic elements of Candu Energy's Aging and Obsolescence Program and will share some of the experience having applied it to existing operating stations, consider applications to support expanding regulatory requirements, and describe the integration into the design of new plants, promoting

French steam generator design developments

International Nuclear Information System (INIS)

Ginier, R.; Campan, J.L.; Pontier, M.; Leridon, A.; Remond, A.; Castello, G.; Holcblat, A.; Paurobally, H.

1986-01-01

From the outset of the French nuclear power program, a significant R and D effort has been invested in improvement of the design and operation of Pressurized Water Reactors including a special committment to improving steam generators. The steam generator enhancement program has spawned a wide variety of specific R and D resources, e.g., low temperature hydraulic models for investigation of areas with single-phase flow, and freon-filled models for simulation of areas of steam generators experiencing two-phase flow (tube bundles and moisture separators). For the moisture separators, a large scale research program using freon-filled models and highly sophisticated instrumentation was used. Tests at reactor sites during startup of both 900 MWe and 1300 MWe have been used to validate the assumptions made on the basis of loop tests. These tests also demonstrated the validity of using freon to simulate two-phase flow conditions. The wealth of knowledge accumulated by the steam generator R and D program has been used to develop a new design of steam generators for the N4 plants. The current R and D effort is aimed at qualifying the N4 steam generator model and developing more comprehensive models. One prong of the R and D effort is the Megeve program. Megeve is a 25 MW steam generator which simulates operating conditions of the N4 model. The other prong is Clotaire, a freon-filled steam generator model which will be used to qualify thermal/hydraulic design codes used for multidimensional calculations for design of tube bundles

System 80+{trademark} Standard Design: CESSAR design certification. Volume 11: Amendment I

Energy Technology Data Exchange (ETDEWEB)

1990-12-21

This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program.

Re-Imagining Program Development and Re-Engineering Program Design.

Science.gov (United States)

Currie, Geoffrey M; Thomas, Catherine J

2018-05-03

Program development and review is a central part of institutional and industry quality assurance. Traditional approaches, while well established, present a number of barriers that could undermine process integrity and quality outcomes. Here a new approach to program development and design is explored with the goal of enhancing outcomes for students and institutions. Copyright © 2018 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

Slide layout and integrated design (SLIDE) program

International Nuclear Information System (INIS)

Roberts, S.G.

1975-01-01

SLIDE is a FORTRAN IV program for producing 35 mm color slides on the Control Data CYBER-74. SLIDE interfaces with the graphics package, DISSPLA, on the CYBER-74. It was designed so that persons with no previous computer experience can easily and quickly generate their own textual 35 mm color slides for verbal presentations. SLIDE's features include seven different colors, five text sizes, ten tab positions, and two page sizes. As many slides as desired may be produced during any one run of the program. Each slide is designed to represent an 8 1 / 2 in. x 11 in. or an 11 in. x 8 1 / 2 in. page. The input data cards required to run the SLIDE program and the program output are described. Appendixes contain a sample program run showing input, output, and the resulting slides produced and a FORTRAN listing of the SLIDE program. (U.S.)

Design Considerations in Developing a Text Messaging Program Aimed at Smoking Cessation

Science.gov (United States)

Holtrop, Jodi Summers; Bağci Bosi, A Tülay; Emri, Salih

2012-01-01

Background Cell phone text messaging is gaining increasing recognition as an important tool that can be harnessed for prevention and intervention programs across a wide variety of health research applications. Despite the growing body of literature reporting positive outcomes, very little is available about the design decisions that scaffold the development of text messaging-based health interventions. What seems to be missing is documentation of the thought process of investigators in the initial stages of protocol and content development. This omission is of particular concern because many researchers seem to view text messaging as the intervention itself instead of simply a delivery mechanism. Certainly, aspects of this technology may increase participant engagement. Like other interventions, however, the content is a central driver of the behavior change. Objective To address this noted gap in the literature, we discuss the protocol decisions and content development for SMS Turkey (or Cebiniz birakin diyor in Turkish), a smoking cessation text messaging program for adult smokers in Turkey. Methods Content was developed in English and translated into Turkish. Efforts were made to ensure that the protocol and content were grounded in evidence-based smoking cessation theory, while also reflective of the cultural aspects of smoking and quitting in Turkey. Results Methodological considerations included whether to provide cell phones and whether to reimburse participants for texting costs; whether to include supplementary intervention resources (eg, personal contact); and whether to utilize unidirectional versus bidirectional messaging. Program design considerations included how messages were tailored to the quitting curve and one’s smoking status after one’s quit date, the number of messages participants received per day, and over what period of time the intervention lasted. Conclusion The content and methods of effective smoking cessation quitline programs were

Design Minimalism in Robotics Programming

Directory of Open Access Journals (Sweden)

Anthony Cowley

2008-11-01

Full Text Available With the increasing use of general robotic platforms in different application scenarios, modularity and reusability have become key issues in effective robotics programming. In this paper, we present a minimalist approach for designing robot software, in which very simple modules, with well designed interfaces and very little redundancy can be connected through a strongly typed framework to specify and execute different robotics tasks.

Design Minimalism in Robotics Programming

Directory of Open Access Journals (Sweden)

Anthony Cowley

2006-03-01

Full Text Available With the increasing use of general robotic platforms in different application scenarios, modularity and reusability have become key issues in effective robotics programming. In this paper, we present a minimalist approach for designing robot software, in which very simple modules, with well designed interfaces and very little redundancy can be connected through a strongly typed framework to specify and execute different robotics tasks.

Designing health promotion programs by watching the market.

Science.gov (United States)

Gelb, B D; Bryant, J M

1992-03-01

More health care providers and payors are beginning to see health promotion programs as a significant tool for attracting patients, reducing costs, or both. To help design programs that take into account the values and lifestyles of the target group, naturalistic observation can be useful. The authors illustrate the approach in a study of pipeline workers that provided input for the design of nutrition and smoking cessation programs.

Re-evaluating your nuclear program needs: how to benefit from your vendor's Q.A. program

International Nuclear Information System (INIS)

Cocoros, A.E.

1979-01-01

The quality assurance component control and verification program to be presented provides a cost effective approach to monitoring and controlling the implementation of the design, fabrication, inspection and shipping plans of a supplier. It attempts to coordinate and integrate quality control and verification effort of a supplier with the control and verification effort of the purchaser to obtain a composite which accomplishes a total need. Based on the competency and capabilities of the supplier the purchaser can either maximize the effort the supplier performs or he must maximize his effort to obtain an optimum mix. The ultimate goal is to utilize the supplier's quality assurance program to the greatest benefit in assuring maximum quality

U.S. fast reactor materials and structures program

International Nuclear Information System (INIS)

Harms, W.O.; Purdy, C.M.

1984-01-01

The U.S. DOE has sponsored a vigorous breeder reactor materials and structures program for 15 years. Important contributions have resulted from this effort in the areas of design (inelastic rules, verified methods, seismic criteria, mechanical properties data); resolution of licensing issues (technical witnessing, confirmatory testing); construction (fabrication/welding procedures, nondestructive testing techniques); and operation (sodium purification, instrumentation and chemical analysis, radioactivity control, and in-service inspection. The national LMFBR program currently is being restructured. The Materials and Structures Program will focus its efforts in the following areas: (1) removal of anticipated licensing impediments through confirmation of the adequacy of structural design methods and criteria for components containing welds and geometric discontinuities, the generation of mechanical properties for stainless steel castings and weldments, and the evaluation of irradiation effects; (2) qualification of modified 9 Cr-1 Mo steel and tribological coatings for design flexibility; (3) development of improved inelastic design guidelines and procedures; (4) reform of design codes and standards and engineering practices, leading to simpler, less conservative rules and to simplified design analysis methods; and (5) incorporation of information from foreign program

Goddard Technology Efforts to Improve Space Borne Laser Reliability

Science.gov (United States)

Heaps, William S.

2006-01-01

In an effort to reduce the risk, perceived and actual, of employing instruments containing space borne lasers NASA initiated the Laser Risk Reduction Program (LRRP) in 2001. This program managed jointly by NASA Langley and NASA Goddard and employing lasers researchers from government, university and industrial labs is nearing the conclusion of its planned 5 year duration. This paper will describe some of the efforts and results obtained by the Goddard half of the program.

Designing a monitoring program to estimate estuarine survival of anadromous salmon smolts: simulating the effect of sample design on inference

Science.gov (United States)

Romer, Jeremy D.; Gitelman, Alix I.; Clements, Shaun; Schreck, Carl B.

2015-01-01

A number of researchers have attempted to estimate salmonid smolt survival during outmigration through an estuary. However, it is currently unclear how the design of such studies influences the accuracy and precision of survival estimates. In this simulation study we consider four patterns of smolt survival probability in the estuary, and test the performance of several different sampling strategies for estimating estuarine survival assuming perfect detection. The four survival probability patterns each incorporate a systematic component (constant, linearly increasing, increasing and then decreasing, and two pulses) and a random component to reflect daily fluctuations in survival probability. Generally, spreading sampling effort (tagging) across the season resulted in more accurate estimates of survival. All sampling designs in this simulation tended to under-estimate the variation in the survival estimates because seasonal and daily variation in survival probability are not incorporated in the estimation procedure. This under-estimation results in poorer performance of estimates from larger samples. Thus, tagging more fish may not result in better estimates of survival if important components of variation are not accounted for. The results of our simulation incorporate survival probabilities and run distribution data from previous studies to help illustrate the tradeoffs among sampling strategies in terms of the number of tags needed and distribution of tagging effort. This information will assist researchers in developing improved monitoring programs and encourage discussion regarding issues that should be addressed prior to implementation of any telemetry-based monitoring plan. We believe implementation of an effective estuary survival monitoring program will strengthen the robustness of life cycle models used in recovery plans by providing missing data on where and how much mortality occurs in the riverine and estuarine portions of smolt migration. These data

Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

Energy Technology Data Exchange (ETDEWEB)

Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

1982-03-01

As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume discusses the design, performance and failures of feed pumps, and recommendations for research on pump dynamics, design, and specifications.

NRC Seismic Design Margins Program Plan

International Nuclear Information System (INIS)

Cummings, G.E.; Johnson, J.J.; Budnitz, R.J.

1985-08-01

Recent studies estimate that seismically induced core melt comes mainly from earthquakes in the peak ground acceleration range from 2 to 4 times the safe shutdown earthquake (SSE) acceleration used in plant design. However, from the licensing perspective of the US Nuclear Regulatory Commission, there is a continuing need for consideration of the inherent quantitative seismic margins because of, among other things, the changing perceptions of the seismic hazard. This paper discusses a Seismic Design Margins Program Plan, developed under the auspices of the US NRC, that provides the technical basis for assessing the significance of design margins in terms of overall plant safety. The Plan will also identify potential weaknesses that might have to be addressed, and will recommend technical methods for assessing margins at existing plants. For the purposes of this program, a general definition of seismic design margin is expressed in terms of how much larger that the design basis earthquake an earthquake must be to compromise plant safety. In this context, margin needs to be determined at the plant, system/function, structure, and component levels. 14 refs., 1 fig

Software tools to aid Pascal and Ada program design

Energy Technology Data Exchange (ETDEWEB)

Jankowitz, H.T.

1987-01-01

This thesis describes a software tool which analyses the style and structure of Pascal and Ada programs by ensuring that some minimum design requirements are fulfilled. The tool is used in much the same way as a compiler is used to teach students the syntax of a language, only in this case issues related to the design and structure of the program are of paramount importance. The tool operates by analyzing the design and structure of a syntactically correct program, automatically generating a report detailing changes that need to be made in order to ensure that the program is structurally sound. The author discusses how the model gradually evolved from a plagiarism detection system which extracted several measurable characteristics in a program to a model that analyzed the style of Pascal programs. In order to incorporate more-sophistical concepts like data abstraction, information hiding and data protection, this model was then extended to analyze the composition of Ada programs. The Ada model takes full advantage of facilities offered in the language and by using this tool the standard and quality of written programs is raised whilst the fundamental principles of program design are grasped through a process of self-tuition.

Learning Environment and Student Effort

Science.gov (United States)

Hopland, Arnt O.; Nyhus, Ole Henning

2016-01-01

Purpose: The purpose of this paper is to explore the relationship between satisfaction with learning environment and student effort, both in class and with homework assignments. Design/methodology/approach: The authors use data from a nationwide and compulsory survey to analyze the relationship between learning environment and student effort. The…

Track Dynamics Program

Science.gov (United States)

1978-10-01

8 Track Bushing Research, . . . . . . . . . . . * . . . 8 Advanced frack Concept Development ..... . . . . . 9 TECHNICAL DISCUSSION...machine design effort was conducted. The design which was developed has separate servocontrolled hydraulic actuators to apply radial...back bending-but, in the order and magnitude of the way the torsional stress is incurred in service. This suggests a programable, hydraulically actuated

Federal Employees Health Benefits Program and Federal Employees Dental and Vision Insurance Program: eligibility for Pathway Programs participants. Interim final rule with request for comments.

Science.gov (United States)

2014-01-06

The U.S. Office of Personnel Management (OPM) is issuing an interim final regulation to update the Federal Employees Health Benefits Program (FEHBP) and the Federal Employees Dental and Vision Insurance Program (FEDVIP) regulations to reflect updated election opportunities for participants in the Pathways Programs. The Pathways Programs were created by Executive Order (E.O.) 13562, signed by the President on December 27, 2010, and are designed to enable the Federal Government to compete effectively for students and recent graduates by improving its recruitment efforts through internships and similar programs with Federal agencies. This interim final rule furthers these recruitment and retention efforts by providing health insurance, as well as dental and vision benefits, to eligible program participants and their families.

Design of incentive programs for accelerating penetration of energy-efficient appliances

International Nuclear Information System (INIS)

Rue du Can de la, Stephane; Leventis, Greg; Phadke, Amol; Gopal, Anand

2014-01-01

Incentives are policy tools that sway purchase, retail stocking, and production decisions toward energy-efficient products. Incentives complement mandatory standards and labeling policies by accelerating market penetration of products that are more energy efficient than required by existing standards and by preparing the market for more stringent future mandatory requirements. Incentives can be directed at different points in the appliance's supply chain; one point may be more effective than another depending on the technology's maturity and market penetration. This paper seeks to inform future policy and program design by categorizing the main elements of incentive programs from around the world. We identify advantages and disadvantages of program designs through a qualitative overview of incentive programs worldwide. We find that financial incentive programs have greater impact when they target highly efficient technologies with a small market share, and that program designs depend on the market barriers addressed, the target equipment, and the local market context. No program design is inherently superior to another. The key to successful program design and implementation is a thorough understanding of the market and identification of the most important local obstacles to the penetration of energy-efficient technologies. - Highlights: • We researched incentive programs design and implementation worldwide. • This paper seeks to inform future policy and program design. • We identify design and identify advantages and disadvantages. • We find that incentive programs have greater impact when they target highly efficient products. • Program designs depend on the market barriers addressed and the local market context

15 CFR 930.114 - Secretarial mediation efforts.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Secretarial mediation efforts. 930.114... MANAGEMENT FEDERAL CONSISTENCY WITH APPROVED COASTAL MANAGEMENT PROGRAMS Secretarial Mediation § 930.114 Secretarial mediation efforts. (a) Following the close of the hearing, the hearing officer shall transmit the...

The selection of the American-Polish joint venture projects for the Krakow program and results of the efforts to date

Energy Technology Data Exchange (ETDEWEB)

Gyorke, D.F.; Butcher, T.A.

1995-12-31

To implement the Krakow Clean Fossil Fuels and Energy Efficiency Program, eight U.S. firms were selected by the U.S. Department of Energy to market their technologies to reduce pollution from low emission sources in Krakow. The eight U.S. firms were selected by a competitive solicitation that required the proposing firms to themselves provide funding to match or exceed the funding provided by the Program. These U.S. firms and their Polish partner companies have begun sales and cooperative work efforts in Krakow, and some have already made initial equipment installations with measurable performance improvements. Following their efforts as part of the Program, these U.S.-Polish joint ventures will market their technologies and achieve the associated environmental benefits elsewhere in Poland and Eastern and Central Europe. As part of the Krakow Program a spreadsheet model was developed to compare technological options for supplying heat to the city by calculation and comparing the heating costs and associated emissions reduction for each option. Comparison of options is made on the basis of the user cost-per-metric ton of equivalent emissions reduction. For all options considered in the Krakow Program, this cost parameter has ranged from -$1469 (best) to $2650 (worst). The costs for technologies associated with the eight projects in the Krakow Program are at the lower end of this range placing these technologies among the most cost effective solutions to the pollution problems from the low emission sources.

Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Generator training manual

International Nuclear Information System (INIS)

1993-03-01

This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Management training manual

International Nuclear Information System (INIS)

1993-03-01

This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

Program computes single-point failures in critical system designs

Science.gov (United States)

Brown, W. R.

1967-01-01

Computer program analyzes the designs of critical systems that will either prove the design is free of single-point failures or detect each member of the population of single-point failures inherent in a system design. This program should find application in the checkout of redundant circuits and digital systems.

Designing Chemistry Practice Exams for Enhanced Benefits: An Instrument for Comparing Performance and Mental Effort Measures

Science.gov (United States)

Knaus, Karen J.; Murphy, Kristen L.; Holme, Thomas A.

2009-01-01

The design and use of a chemistry practice exam instrument that includes a measure for student mental effort is described in this paper. Use of such an instrument can beneficial to chemistry students and chemistry educators as well as chemical education researchers from both a content and cognitive science perspective. The method for calculating…

Quality-oriented efforts in IPD, - a framework

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1998-01-01

It is generally expected that modern quality efforts like TQM and ISO9000 should deliver a sufficient framework for quality efforts in industrial companies. Our findings in Danish industry shows a fragmented picture of islands of efforts and a weak understanding of basic quality concepts between...... designers. The paper propose a framework for quality efforts, illustrated by simple metaphors....

Employee wellness program evaluation.

Science.gov (United States)

2008-12-01

Well-designed wellness programs can keep healthy employees healthy, support employees with : health risks to improve their health behaviors, and facilitate organizational efforts to achieve : workforce performance goals. : Productivity lost through a...

Radiation protection/shield design

International Nuclear Information System (INIS)

Disney, R.K.

1977-01-01

Radiation protection/shielding design of a nuclear facility requires a coordinated effort of many engineering disciplines to meet the requirements imposed by regulations. In the following discussion, the system approach to Clinch River Breeder Reactor Plant (CRBRP) radiation protection will be described, and the program developed to implement this approach will be defined. In addition, the principal shielding design problems of LMFBR nuclear reactor systems will be discussed in realtion to LWR nuclear reactor system shielding designs. The methodology used to analyze these problems in the U.S. LMFBR program, the resultant design solutions, and the experimental verification of these designs and/or methods will be discussed. (orig.) [de

Program packages for dynamics systems analysis and design

International Nuclear Information System (INIS)

Athani, V.V.

1976-01-01

The development of computer program packages for dynamic system analysis and design are reported. The purpose of developing these program packages is to take the burden of writing computer programs off the mind of the system engineer and to enable him to concentrate on his main system analysis and design work. Towards this end, four standard computer program packages have been prepared : (1) TFANA - starting from system transfer function this program computes transient response, frequency response, root locus and stability by Routh Hurwitz criterion, (2) TFSYN - classical synthesis using algebraic method of Shipley, (3) MODANA - starting from state equations of the system this program computes solution of state equations, controllability, observability and stability, (4) OPTCON - This program obtains solutions of (i) linear regulator problem, (ii) servomechanism problems and (iii) problem of pole placement. The paper describes these program packages with the help of flowcharts and illustrates their use with the help of examples. (author)

An assessment of design control practices and design reconstitution programs in the nuclear power industry

International Nuclear Information System (INIS)

Imbro, E.V.

1991-02-01

The US Nuclear Regulatory Commission (NRC) and the utilities have identified shortcomings involving the maintenance of well-defined design bases and the availability of the necessary supporting design documentation. Many utilities have embarked on design-document reconstitution programs although there has been no clear consensus regarding what information should be included in design-bases documents, what is the minimum set of necessary design documents to support the design bases, or how missing or deficient design documentation should be handled. The NRC initiated a survey to ascertain the status of design control programs within the industry and the approaches to design-bases documentation used by some utilities. The survey scope included six utilities and one nuclear steam supply system vendor. Conclusions and observations resulting from the survey assessments are provided so that utilities and the NRC can consider actions to improve these programs. 12 refs

LOFT fuel modules design, characterization, and fabrication program

International Nuclear Information System (INIS)

Russell, M.L.

1977-06-01

The loss-of-fluid test [LOFT) fuel modules have evolved from a comprehensive five-year design, characterization, and fabrication program which has resulted in the accomplishment of many technical activities of interest in pressurized water reactor fuel design development and safety research. Information is presented concerning: determination of fundamental high-temperature reactor material properties; design invention related to in-core instrumentation attachment; implementation of advanced and/or unique fuel bundle characterization techniques; implementation of improved fuel bundle fabrication techniques; and planning and execution of a multimillion dollar design, characterization, and fabrication program for pressurized water reactor fuel

Adopting an Evidence-Based Lifestyle Physical Activity Program: Dissemination Study Design and Methods.

Science.gov (United States)

Dunn, Andrea L; Buller, David B; Dearing, James W; Cutter, Gary; Guerra, Michele; Wilcox, Sara; Bettinghaus, Erwin P

2012-06-01

, educational and medical sectors compared with fitness and other sectors, (p=0.02). More cases reported being involved in the decision to adopt ALED (pmarketing and offering other types of physical activity programs and services. Finally, slightly over half of the adopters reported they had actually implemented the ALED program. CONCLUSION: Dissemination research requires new perspectives and designs to produce valid insights about the results of dissemination efforts. This study design, survey methods and theoretically-based questions can serve as a useful model for other evidence-based public health interventions that are marketed by commercial publishers to better understand key issues related to adoption and implementation of evidence-based programs.

Design criteria for piping and nozzles program

International Nuclear Information System (INIS)

Moore, S.E.; Bryson, J.W.

1977-01-01

This report reviews the activities and accomplishments of the Design Criteria for Piping and Nozzles program being conducted by the Oak Ridge National Laboratory for the period July 1, 1975, to September 30, 1976. The objectives of the program are to conduct integrated experimental and analytical stress analysis studies of piping system components and isolated and closely-spaced pressure vessel nozzles in order to confirm and/or improve the adequacy of structural design criteria and analytical methods used to assure the safe design of nuclear power plants. Activities this year included the development of a finite-element program for analyzing two closely spaced nozzles in a cylindrical pressure vessel; a limited-parameter study of vessels with isolated nozzles, finite-element studies of piping elbows, a fatigue test of an out-of-round elbow, summary and evaluation of experimental studies on the elastic-response and fatigue failure of tees, parameter studies on the behavior of flanged joints, publication of fifteen topical reports and papers on various experimental and analytical studies; and the development and acceptance of a number of design rules changes to the ASME Code. 2 figures, 2 tables

Heuristic program to design Relational Databases

Directory of Open Access Journals (Sweden)

Manuel Pereira Rosa

2009-09-01

Full Text Available The great development of today’s world determines that the world level of information increases day after day, however, the time allowed to transmit this information in the classrooms has not changed. Thus, the rational work in this respect is more than necessary. Besides, if for the solution of a given type of problem we do not have a working algorism, we have, first to look for a correct solution, then the heuristic programs are of paramount importance to succeed in these aspects. Having into consideration that the design of the database is, essentially, a process of problem resolution, this article aims at proposing a heuristic program for the design of the relating database.

User-Centered Design of GPU-Based Shader Programs

DEFF Research Database (Denmark)

Kraus, Martin

2012-01-01

In the context of game engines with graphical user interfaces, shader programs for GPUs (graphics processing units) are an asset for game development that is often used by artists and game developers without knowledge of shader programming. Thus, it is important that non-programmers are enabled...... to explore and exploit the full potential of shader programs. To this end, we develop principles and guidelines for the design of usercentered graphical interfaces for shaders. With the help of several examples, we show how the requirements of a user-centered interface design influence the choice of widgets...

Development of Innovative Design Processor

International Nuclear Information System (INIS)

Park, Y.S.; Park, C.O.

2004-01-01

The nuclear design analysis requires time-consuming and erroneous model-input preparation, code run, output analysis and quality assurance process. To reduce human effort and improve design quality and productivity, Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented design and the web-based design. The document-oriented design is that, if the designer writes a design document called active document and feeds it to a special program, the final document with complete analysis, table and plots is made automatically. The active documents can be written with ordinary HTML editors or created automatically on the web, which is another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment, the design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R and D tasks of KNFC. (authors)

Design verification for reactor head replacement

International Nuclear Information System (INIS)

Dwivedy, K.K.; Whitt, M.S.; Lee, R.

2005-01-01

This paper outlines the challenges of design verification for reactor head replacement for PWR plants and the program for qualification from the prospective of the utility design engineering group. This paper is based on the experience with the design confirmation of four reactor head replacements for two plants, and their interfacing components, parts, appurtenances, and support structures. The reactor head replacement falls under the jurisdiction of the applicable edition of the ASME Section XI code, with particular reference to repair/replacement activities. Under any repair/replacement activities, demands may be encountered in the development of program and plan for replacement due to the vintage of the original design/construction Code and the design reports governing the component qualifications. Because of the obvious importance of the reactor vessel, these challenges take on an added significance. Additional complexities are introduced to the project, when the replacement components are fabricated by vendors different from the original vendor. Specific attention is needed with respect to compatibility with the original design and construction of the part and interfacing components. The program for reactor head replacement requires evaluation of welding procedures, applicable examination, test, and acceptance criteria for material, welds, and the components. Also, the design needs to take into consideration the life of the replacement components with respect to the extended period of operation of the plant after license renewal and other plant improvements. Thus, the verification of acceptability of reactor head replacement provides challenges for development and maintenance of a program and plan, design specification, design report, manufacturer's data report and material certification, and a report of reconciliation. The technical need may also be compounded by other challenges such as widely scattered global activities and organizational barriers, which

Short educational programs in optical design and engineering

Science.gov (United States)

Voznesenskaya, Anna; Romanova, Galina; Bakholdin, Alexey; Tolstoba, Nadezhda; Ezhova, Kseniia

2016-09-01

Globalization and diversification of education in optical engineering causes a number of new phenomena in students' learning paths. Many students have an interest to get some courses in other universities, to study in international environment, to broaden not only professional skills but social links and see the sights as well etc. Participation in short educational programs (e.g. summer / winter schools, camps etc.) allows students from different universities to learn specific issues in their or in some neighbor field and also earn some ECTS for the transcript of records. ITMO University provides a variety of short educational programs in optical design and engineering oriented for different background level, such are: Introduction into optical engineering, Introduction into applied and computer optics, Optical system design, Image modeling and processing, Design of optical devices and components. Depending on students' educational background these programs are revised and adopted each time. Usually the short educational programs last 4 weeks and provide 4 ECTS. The short programs utilize a set of out-of date educational technologies like problem-based learning, case-study and distance-learning and evaluation. Practically, these technologies provide flexibility of the educational process and intensive growth of the learning outcomes. Students are satisfied with these programs very much. In their feedbacks they point a high level of practical significance, experienced teaching staff, scholarship program, excellent educational environment, as well as interesting social program and organizational support.

Design and Development of a Nonverbal Program

Science.gov (United States)

Thiagarajan, S.

1973-01-01

Problems were encountered in designing an illustrated program on contraceptive techniques for India's rural population where illiteracy is high and hundreds of different languages are spoken. Field trials of a picture program indicated the ability to "read" a picture is an acquired skill. (Author)

Middle school girls and one STEM OST program

Science.gov (United States)

Holba, Andrea

This dissertation examines motivation in middle school girls involved in one STEM OST program. Specifically, motivation is examined through four distinct components. These components are attention, relevance, confidence, and satisfaction. Although these components are unique, they cumulatively create a holistic picture of motivation in program design. The middle school girl participants were observed at program workshops and personal interviews. Exploring program design elements through this lens of motivation was a qualitative effort to both understand how participants respond to design elements, and what might encourage future participation in STEM activities.

Effective Work Procedure design Using Discomfort and Effort Factor in Brick stacking operation-A case study

Science.gov (United States)

Rout, Biswaranjan; Dash, R. R.; Dhupal, D.

2018-02-01

In this work a typical planning of movement of limbs and torso of the worker to be well design to reduce fatigue and energy of the worker. A simulation model is generated to suit the procedure and comply with the constraints in the workspace. It requires verifying the capability of human postures and movements in different working conditions for the evaluation of effectiveness of the new design. In this article a simple human performance measure is introduce that enable the mathematical model for evaluation of a cost function. The basic scheme is to evaluate the performance in the form of several cost factors using AI techniques. Here two main cost factors taken in to consideration are discomfort factor and effort factor in limb movements. Discomfort factor measures the level of discomfort from the most neutral position of a given limb to the position of the corresponding limb after movement and effort factor is a measure of the displacement of the corresponding limbs from the original position. The basic aim is to optimize the movement of the limbs with the above mentioned cost functions. The effectiveness of the procedure is tested with an example of working procedure of workers used for stacking of fly ash bricks in a local fly ash bricks manufacturing unit. The objective is to find out the optimised movement of the limbs to reduce discomfort level and effort required of workers. The effectiveness of the procedure in this case study illustrated with the obtained results.

Modeling to Mars: a NASA Model Based Systems Engineering Pathfinder Effort

Science.gov (United States)

Phojanamongkolkij, Nipa; Lee, Kristopher A.; Miller, Scott T.; Vorndran, Kenneth A.; Vaden, Karl R.; Ross, Eric P.; Powell, Bobby C.; Moses, Robert W.

2017-01-01

The NASA Engineering Safety Center (NESC) Systems Engineering (SE) Technical Discipline Team (TDT) initiated the Model Based Systems Engineering (MBSE) Pathfinder effort in FY16. The goals and objectives of the MBSE Pathfinder include developing and advancing MBSE capability across NASA, applying MBSE to real NASA issues, and capturing issues and opportunities surrounding MBSE. The Pathfinder effort consisted of four teams, with each team addressing a particular focus area. This paper focuses on Pathfinder team 1 with the focus area of architectures and mission campaigns. These efforts covered the timeframe of February 2016 through September 2016. The team was comprised of eight team members from seven NASA Centers (Glenn Research Center, Langley Research Center, Ames Research Center, Goddard Space Flight Center IV&V Facility, Johnson Space Center, Marshall Space Flight Center, and Stennis Space Center). Collectively, the team had varying levels of knowledge, skills and expertise in systems engineering and MBSE. The team applied their existing and newly acquired system modeling knowledge and expertise to develop modeling products for a campaign (Program) of crew and cargo missions (Projects) to establish a human presence on Mars utilizing In-Situ Resource Utilization (ISRU). Pathfinder team 1 developed a subset of modeling products that are required for a Program System Requirement Review (SRR)/System Design Review (SDR) and Project Mission Concept Review (MCR)/SRR as defined in NASA Procedural Requirements. Additionally, Team 1 was able to perform and demonstrate some trades and constraint analyses. At the end of these efforts, over twenty lessons learned and recommended next steps have been identified.

United States Superconducting MHD Magnet Technology Development Program

International Nuclear Information System (INIS)

Dawson, A.M.; Marston, P.G.; Thome, R.J.; Iwasa, Y.; Tarrh, J.M.

1981-01-01

A three-faceted program supported by the U.S. Dep of Energy is described. These facets include basic technology development, technology transfer and construction by industry of magnets for the national MHD program. The program includes the maintenance of a large component test facility; investigation of superconductor stability and structural behavior; measurements of materials' properties at low temperatures; structural design optimization; analytical code development; cryogenic systems and power supply design. The technology transfer program is designed to bring results of technology development and design and construction effort to the entire superconducting magnet community. The magnet procurement program is responsible for developing conceptual designs of magnets needed for the national MHD program, for issuing requests for quotation, selecting vendors and supervising design, construction, installation and test of these systems. 9 refs

Designing PV Incentive Programs to Promote System Performance: AReview of Current Practice

Energy Technology Data Exchange (ETDEWEB)

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-11-12

rather than the rated capacity of the modules or system, are often suggested as one possible strategy. Somewhat less recognized are the many other program design options also available, each with its particular advantages and disadvantages. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance - including, but not limited to, PBIs - used by 32 prominent PV incentive programs in the U.S. (see Table 1).1 We focus specifically on programs that offer an explicit subsidy payment for customer-sited PV installations. PV support programs that offer other forms of financial support or that function primarily as a mechanism for purchasing renewable energy credits (RECs) through energy production-based payments are outside the scope of our review.2 The information presented herein is derived primarily from publicly available sources, including program websites and guidebooks, programs evaluations, and conference papers, as well as from a limited number of personal communications with program staff. The remainder of this report is organized as follows. The next section presents a simple conceptual framework for understanding the issues that affect PV system performance and provides an overview of the eight general strategies to encourage performance used among the programs reviewed in this report. The subsequent eight sections discuss in greater detail each of these program design strategies and describe how they have been implemented among the programs surveyed. Based on this review, we then offer a series of recommendations for how PV incentive programs can effectively promote PV system performance.

Generative design visualize, program, and create with processing

CERN Document Server

Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius

2012-01-01

Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.

NASA OSMA NDE Program Additive Manufacturing Foundational Effort

Science.gov (United States)

Waller, Jess; Walker, James; Burke, Eric; Wells, Douglas; Nichols, Charles

2016-01-01

NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

Fusion reactor design and technology program in China

International Nuclear Information System (INIS)

Huang, J.H.

1994-01-01

A fusion-fission hybrid reactor program was launched in 1987. The purpose of development of the hybrid reactor is twofold: to solve the problem of nuclear fuel supply for an expected large-scale development of fission reactor plants, and to maintain the momentum of fusion research. The program is described and the activities and progress of the program are presented. Two conceptual designs of an engineering test reactor with tokamak configuration were developed at the Southwestern Institute of Physics and the Institute of Plasma Physics. The results are a tokamak engineering test breeder (TETB) series design and a fusion-fission hybrid reactor design (SSEHR), characterized by a liquid-Li self-cooled blanket and an He-cooled solid tritium breeder blanket respectively. In parallel with the design studies, relevant technological experiments on a small or medium scale have been supported by this program. These include LHCD, ICRH and pellet injection in the area of plasma engineering; neutronics integral experiments with U, Pu, Fe and Be; various irradiation tests of austenitic and ferritic steels, magnetohydrodynamic (MHD) pressure drop experiments using a liquid metal loop; research into permeation barriers for tritium and hydrogen isotopes; solid tritium breeder tests using an in-situ loop in a fission reactor. All these experiments have proceeded successfully. The second step of this program is now starting. It seems reasonable that most of the research carried out in the first step will continue. ((orig.))

Future Efforts in Flynn Effect Research: Balancing Reductionism with Holism

Directory of Open Access Journals (Sweden)

Michael A. Mingroni

2014-10-01

Full Text Available After nearly thirty years of concerted effort by many investigators, the cause or causes of the secular gains in IQ test scores, known as the Flynn effect, remain elusive. In this target article, I offer six suggestions as to how we might proceed in our efforts to solve this intractable mystery. The suggestions are as follows: (1 compare parents to children; (2 consider other traits and conditions; (3 compare siblings; (4 conduct more and better intervention programs; (5 use subtest profile data in context; and (6 quantify the potential contribution of heterosis. This last section contains new simulations of the process of heterosis, which provide a plausible scenario whereby rapid secular changes in multiple genetically influenced traits are possible. If there is any theme to the present paper, it is that future study designs should be simpler and more highly focused, coordinating multiple studies on single populations.

Computational Materials Program for Alloy Design

Science.gov (United States)

Bozzolo, Guillermo

2005-01-01

The research program sponsored by this grant, "Computational Materials Program for Alloy Design", covers a period of time of enormous change in the emerging field of computational materials science. The computational materials program started with the development of the BFS method for alloys, a quantum approximate method for atomistic analysis of alloys specifically tailored to effectively deal with the current challenges in the area of atomistic modeling and to support modern experimental programs. During the grant period, the program benefited from steady growth which, as detailed below, far exceeds its original set of goals and objectives. Not surprisingly, by the end of this grant, the methodology and the computational materials program became an established force in the materials communitiy, with substantial impact in several areas. Major achievements during the duration of the grant include the completion of a Level 1 Milestone for the HITEMP program at NASA Glenn, consisting of the planning, development and organization of an international conference held at the Ohio Aerospace Institute in August of 2002, finalizing a period of rapid insertion of the methodology in the research community worlwide. The conference, attended by citizens of 17 countries representing various fields of the research community, resulted in a special issue of the leading journal in the area of applied surface science. Another element of the Level 1 Milestone was the presentation of the first version of the Alloy Design Workbench software package, currently known as "adwTools". This software package constitutes the first PC-based piece of software for atomistic simulations for both solid alloys and surfaces in the market.Dissemination of results and insertion in the materials community worldwide was a primary focus during this period. As a result, the P.I. was responsible for presenting 37 contributed talks, 19 invited talks, and publishing 71 articles in peer-reviewed journals, as

Web-Based Engine for Program Curriculum Designers

Science.gov (United States)

Hamam, H.; Loucif, S.

2009-01-01

Educational institutions pay careful attention to the design of program curricula, which represent a framework to meet institutional goals and missions. Of course, the success of any institution depends highly on the quality of its program curriculum. The development of such a curriculum and, more importantly, the evaluation of its quality are…

Advanced Light Water Reactor Program: Program management and staff review methodology

International Nuclear Information System (INIS)

Moran, D.H.

1986-12-01

This report summarizes the NRC/EPRI coordinated effort to develop design requirements for a standardized advanced light water reactor (ALWR) and the procedures for screening and applying new generic safety issues to this program. The end-product will be an NRC-approved ALWR Requirements Document for use by the nuclear industry in generating designs of LWRs to be constructed for operation in the 1990s and beyond

GCRA review and appraisal of HTGR reactor-core-design program

International Nuclear Information System (INIS)

1980-09-01

The reactor-core-design program has as its principal objective and responsibility the design and resolution of major technical issues for the reactor core and core components on a schedule consistent with the plant licensing and construction program. The task covered in this review includes three major design areas: core physics, core thermal and hydraulic performance fuel element design, and in-core fuel performance evaluation

Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

CERN Document Server

Leach, Ronald

2014-01-01

Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

Logic-programming language enriches design processes

Energy Technology Data Exchange (ETDEWEB)

Kitson, B.; Ow-Wing, K.

1984-03-22

With the emergence of a set of high-level CAD tools for programmable logic devices, designers can translate logic into functional custom devices simply and efficiently. The core of the package is a blockstructured hardware description language called PLPL, for ''programmable-logic programming language.'' The cheif advantage of PLPL lies in its multiple input formats, which permit different design approaches for a variety of design problems. The higher the level of the approach, the closer PLPL will come to directly specifying the desired function. Intermediate steps in the design process can be eliminated, along with the errors that might have been generated during those steps.

A COMPUTER APPLICATION FOR THE ARCHITECTURAL PROGRAM DEVELOPMENT IN DESIGN EDUCATION

Directory of Open Access Journals (Sweden)

Daniel de Carvalho Moreira

2012-02-01

Full Text Available The development of the architectural program in the design studio faces several difficulties. The purpose of the program is to describe the conditions where the building being designed will operate; this requires a lot of information and organization. Due to its complexity, the architetural program definition in the disciplines of design is often simplified. This article discusses such issue and proposes a computer application (SINFORMA that gathers information about the building and the theme of the project in order to develop the architectural program based on structures proposed by bibliographic references. The SINFORMA is composed by a framework which includes a data base and modules which analyze and organize functional requirements, according to the Problem Seeking method and the contemporary values of architecture enumerated by Hershberger. It is discussed how the application can be applied in design education and how it offers students a practical approach and a comprehensive data analysis for the design of built environment. Keywords: Architectural programming, Architectural design, Education.

Hanford Site waste tank farm facilities design reconstitution program plan

International Nuclear Information System (INIS)

Vollert, F.R.

1994-01-01

Throughout the commercial nuclear industry the lack of design reconstitution programs prior to the mid 1980's has resulted in inadequate documentation to support operating facilities configuration changes or safety evaluations. As a result, many utilities have completed or have ongoing design reconstitution programs and have discovered that without sufficient pre-planning their program can be potentially very expensive and may result in end-products inconsistent with the facility needs or expectations. A design reconstitution program plan is developed here for the Hanford waste tank farms facility as a consequence of the DOE Standard on operational configuration management. This design reconstitution plan provides for the recovery or regeneration of design requirements and basis, the compilation of Design Information Summaries, and a methodology to disposition items open for regeneration that were discovered during the development of Design Information Summaries. Implementation of this plan will culminate in an end-product of about 30 Design Information Summary documents. These documents will be developed to identify tank farms facility design requirements and design bases and thereby capture the technical baselines of the facility. This plan identifies the methodology necessary to systematically recover documents that are sources of design input information, and to evaluate and disposition open items or regeneration items discovered during the development of the Design Information Summaries or during the verification and validation processes. These development activities will be governed and implemented by three procedures and a guide that are to be developed as an outgrowth of this plan

Safety and environmental requirements and design targets for TIBER-II

International Nuclear Information System (INIS)

Piet, S.J.

1987-09-01

A consistent set of safety and environmental requirements and design targets was proposed and adopted for the TIBER-II (Tokamak Ignition/Burn Experimental Reactor) design effort. TIBER-II is the most recent US version of a fusion experimental test reactor (ETR). These safety and environmental design targets were one contribution of the Fusion Safety Program in the TIBER-II design effort. The other contribution, safety analyses, is documented in the TIBER-II design report. The TIBER-II approach, described here, concentrated on logical development of, first, a complete and consistent set of safety and environmental requirements that are likely appropriate for an ETR, and, second, an initial set of design targets to guide TIBER-II. Because of limited time in the TIBER-II design effort, the iterative process only included one iteration - one set of targets and one design. Future ETR design efforts should therefore build on these design targets and the associated safety analyses. 29 refs., 5 figs., 3 tabs

'More effort and more time.' Considerations in the establishment of interprofessional education programs in the workplace.

Science.gov (United States)

Kent, Fiona; Nankervis, Katrina; Johnson, Christina; Hodgkinson, Marisa; Baulch, Julie; Haines, Terry

2018-01-01

The argument for integrating interprofessional education (IPE) activities into the workplace has been made concurrently with the call for collaborative clinical practice. An exploratory case study investigation of existing activities in a large metropolitan health care network was undertaken to inform the development of future IPE initiatives. Purposive sampling invited clinicians involved in the design or delivery of workplace IPE activities to participate in a semi-structured interview to discuss their existing programs and the opportunities and challenges facing future work. Interviews were audiotaped, transcribed and thematically analysed. In total, 15 clinicians were interviewed representing medicine, nursing, occupational therapy, pharmacy, physiotherapy, psychology, social work and speech pathology. The IPE programs identified included one medical and midwifery student workshop, several dedicated new graduate or intern programs combining the professions and multiple continuing professional development programs. Three dominant themes were identified to inform the development of future work: clinician factors, organisational factors and IPE considerations. In addition to the cultural, physical and logistical challenges associated with education that integrates professions in the workplace, the time required for the design and delivery of integrated team training should be accounted for when establishing such programs. Considerations for sustainability include ongoing investment in education skills for clinicians, establishment of dedicated education roles and expansion of existing education activities.

Development of parallel/serial program analyzing tool

International Nuclear Information System (INIS)

Watanabe, Hiroshi; Nagao, Saichi; Takigawa, Yoshio; Kumakura, Toshimasa

1999-03-01

Japan Atomic Energy Research Institute has been developing 'KMtool', a parallel/serial program analyzing tool, in order to promote the parallelization of the science and engineering computation program. KMtool analyzes the performance of program written by FORTRAN77 and MPI, and it reduces the effort for parallelization. This paper describes development purpose, design, utilization and evaluation of KMtool. (author)

Automated a complex computer aided design concept generated using macros programming

Science.gov (United States)

Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

2013-12-01

Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

Automated a complex computer aided design concept generated using macros programming

International Nuclear Information System (INIS)

Ramly, Mohammad Rizal; Asrokin, Azharrudin; Rahman, Safura Abd; Zulkifly, Nurul Ain Md

2013-01-01

Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes

AP600 - an ALWR conceptual design

International Nuclear Information System (INIS)

Bruce, R.A.; Vijuk, R.P.

1988-01-01

The Electric Power Research Institute is spearheading an effort to develop utility requirements for the Advanced Light Water Reactor (ALWR) plants which will become the next generation nuclear power plants for the U.S. This EPRI ALWR Program involves utilities, the U.S. Department of Energy, the U.S. Nuclear Regulatory Commission, and various industry suppliers. The ALWR Program is aimed at ALWR plants which incorporate step improvements in safety, reliability, operability and power generation costs. As part of the ALWR efforts, a Westinghouse team is conducting conceptual design development of a PWR plant design called the AP600, reflecting advanced passive safety features and the chosen 600 MWe plant output. The AP600 conceptual design provides significant improvements while employing proven component technology. This paper describes the basic reactor and primary coolant system features, the passive safety system features, and plant arrangement/construction features of AP600

A Critical Evaluation on Programming Paradigms to Achieve Optimal Resource Utilization of Mobile Softwares in Mobile Devices

OpenAIRE

Selvakumar Samuel; Arangasamy Kovalan

2014-01-01

This paper evaluates the features of mainstream programming paradigms. Imperative, object oriented programming and functional programming concepts are considered here. This is an effort to identify the programming paradigms which consume less resource from mobile devices. Designers usually depend on the programming languages, language oriented programming design is in current practice. Choosing appropriate programming paradigms during the mobile application design is not in practice now; Fail...

Creating an Integrated Community-Wide Effort to Enhance Diversity in the Geosciences

Science.gov (United States)

Manduca, C. A.; Weingroff, M.

2001-05-01

Supporting the development and sustenance of a diverse geoscience workforce and improving Earth system education for the full diversity of students are important goals for our community. There are numerous established programs and many new efforts beginning. However, these efforts can become more powerful if dissemination of opportunities, effective practices, and web-based resources enable synergies to develop throughout our community. The Digital Library for Earth System Education (DLESE; www.dlese.org) has developed a working group and a website to support these goals. The DLESE Diversity Working Group provides an open, virtual community for those interested in enhancing diversity in the geosciences. The working group has focused its initial effort on 1) creating a geoscience community engaged in supporting increased diversity that builds on and is integrated with work taking place in other venues; 2) developing a web resource designed to engage and support members of underrepresented groups in learning about the Earth; and 3) assisting in enhancing DLESE collections and services to better support learning experiences of students from underrepresented groups. You are invited to join the working group and participate in these efforts. The DLESE diversity website provides a mechanism for sharing information and resources. Serving as a community database, the website provides a structure in which community members can post announcements of opportunities, information on programs, and links to resources and services. Information currently available on the site includes links to professional society activities; mentoring opportunities; grant, fellowship, employment, and internship opportunities for students and educators; information on teaching students from underrepresented groups; and professional development opportunities of high interest to members of underrepresented groups. These tools provide a starting point for developing a community wide effort to enhance

Assessing School-Based Gang Prevention Efforts in Urban Centers: Are These Programs Reaching Those Students Who May Benefit the Most?

Science.gov (United States)

Rodriguez, Hector

2009-01-01

In recent years, schools have become a focal point for general delinquency and gang prevention programs for a variety of reasons. One premise behind this approach is that schools can serve as ideal settings for providing delinquency and intervention services because youths spend so much time there. School-based gang prevention efforts are supposed…

Summary report on focusing HTGR technology programs

International Nuclear Information System (INIS)

The program effort to focus technology development activities consists of work in three areas: the identification of Reference Plant Options; the identification of design data needs and supporting program requirements for these plants; and the development of management plans and tools consistent with the execution of candidate systems

An overview of the Douglas Aircraft Company Aeroelastic Design Optimization Program (ADOP)

Science.gov (United States)

Dodd, Alan J.

1989-01-01

From a program manager's viewpoint, the history, scope and architecture of a major structural design program at Douglas Aircraft Company called Aeroelastic Design Optimization Program (ADOP) are described. ADOP was originally intended for the rapid, accurate, cost-effective evaluation of relatively small structural models at the advanced design level, resulting in improved proposal competitiveness and avoiding many costly changes later in the design cycle. Before release of the initial version in November 1987, however, the program was expanded to handle very large production-type analyses.

Configuration management after design basis reconstitution

International Nuclear Information System (INIS)

Purcell, J.J.; Livingston, B.R.

1991-01-01

Over the last few years, Fort Calhoun station (FCS) has implemented a number of programs to enhance plant operability and readiness. The design basis document (DBD) reconstitution project was the cornerstone of this effort. Vendor manual upgrade, operating procedures upgrade, plant equipment data-base verification, equipment labeling, and warehousing improvements were also implemented as part of this improvement program. With the completion of these programs, plant documentation was current to the baselines established by each program, and a configuration management program (CMP) was established to maintain this level of accuracy throughout the remaining life of FCS. Change control throughout the organization has been reviewed and upgraded to ensure that all changes are evaluated for impact to the design bases

Texasgulf solar cogeneration program. Mid-term topical report

Energy Technology Data Exchange (ETDEWEB)

1981-02-01

The status of technical activities of the Texasgulf Solar Cogeneration Program at the Comanche Creek Sulfur Mine is described. The program efforts reported focus on preparation of a system specification, selection of a site-specific configuration, conceptual design, and facility performance. Trade-off studies performed to select the site-specific cogeneration facility configuration that would be the basis for the conceptual design efforts are described. Study areas included solar system size, thermal energy storage, and field piping. The conceptual design status is described for the various subsystems of the Comanche Creek cogeneration facility. The subsystems include the collector, receiver, master control, fossil energy, energy storage, superheat boiler, electric power generation, and process heat subsystems. Computer models for insolation and performance are also briefly discussed. Appended is the system specification. (LEW)

Geographic overlaps between priority areas for forest carbon-storage efforts and those for delivering peacebuilding programs: implications for policy design

Science.gov (United States)

Castro-Nunez, Augusto; Mertz, Ole; Sosa, Chrystian C.

2017-05-01

Of the countries considering national-level policies for incentivizing reductions in forest-based greenhouse gas emissions (REDD+), some 25 are experiencing (or are emerging from) armed-conflicts. It has been hypothesized that the outcomes of the interactions between carbon-storage and peacebuilding efforts could result in either improved or worsened forest conservation and likewise increased or decreased conflict. Hence, for this study we explore potential interactions between forest carbon-storage and peacebuilding efforts, with Colombia as a case study. Spatial associations between biomass carbon and three conflict-related variables suggest that such interactions may exist. Nonetheless, while priority areas for carbon-focused conservation are presumably those at highest risks of deforestation, our research indicates that forests with lower risk of deforestation are typically those affected by armed-conflict. Our findings moreover highlight three possible roles played by Colombian forested municipalities in armed groups’ military strategies: venues for battle, hideouts, and sources of natural resources to finance war.

Residential energy efficiency retrofits: How program design affects participation and outcomes

International Nuclear Information System (INIS)

Hoicka, Christina E.; Parker, Paul; Andrey, Jean

2014-01-01

Better methods of characterizing and addressing heterogeneity in preferences and decision making are needed to stimulate reductions in household greenhouse gas emissions. Four residential energy efficiency programs were delivered consecutively in the Region of Waterloo, Canada, between 1999 and 2011, and each offered a unique combination of information, financial reward structure, and price. A natural quasi-experimental intervention design was employed to assess differences in outcomes across these program structures. Participation at the initial (evaluation by an energy advisor) and follow-up (verification of retrofit) stages, and the material characteristics (e.g., energy performance) were measured and compared between the groups of houses included in each program at each stage. The programs appealed to people with different types of material concerns; each phase of the program was associated with houses with a different mix of material characteristics and depths of recommended and achieved changes. While a performance-based reward attracted fewer houses at each stage than a larger list-based reward, older houses with poorer energy performance were included at each stage. The findings support experimentation with program designs to target sub-populations of housing stock; future program designs should experiment more carefully and with larger performance-based rewards and test parallels with potential carbon market structures. - Highlights: • Multi-program data over 12 years detailing residential energy retrofits. • Natural experimental intervention research design for program evaluation. • Number and attributes of participating households differed by program design. • Financial rewards attracted more participants to the verification stage. • Performance-based incentives have the largest potential for energy savings

Development of an optimized procedure bridging design and structural analysis codes for the automatized design of the SMART

International Nuclear Information System (INIS)

Kim, Tae Wan; Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Jeong, Kyeong Hoon; Lee, Gyu Mahn

1998-09-01

In this report, an optimized design and analysis procedure is established to apply to the SMART (System-integrated Modular Advanced ReacTor) development. The development of an optimized procedure is to minimize the time consumption and engineering effort by squeezing the design and feedback interactions. To achieve this goal, the data and information generated through the design development should be directly transferred to the analysis program with minimum operation. The verification of the design concept requires considerable effort since the communication between the design and analysis involves time consuming stage for the conversion of input information. In this report, an optimized procedure is established bridging the design and analysis stage utilizing the IDEAS, ABAQUS and ANSYS. (author). 3 refs., 2 tabs., 5 figs

A Learning Tool and Program Development for Mechatronics Design Education

Science.gov (United States)

Iribe, Masatsugu; Shirahata, Akihiro; Kita, Hiromasa; Sasashige, Yousuke; Dasai, Ryoichi

In this paper we propose a new type educational program for Mechatronics design which contributes to develop the physical sense and problem solving ability of the students who study Mechatronics design. For this program we provide a new handicraft kit of 4-wheeled car which is composed of inexpensive and commonplace parts, and the performance of the assembled 4-wheeled car is sensitive to its assembly arrangement. And then we implemented this program with the handicraft kit to the university freshmen, and verified its effectiveness, and report the results of the program.

Situation thinking as an aid to organizing and planning the construction effort

International Nuclear Information System (INIS)

Stull, J.O.

1976-01-01

Constructibility of a nuclear project design can be improved by assigning experienced construction men to work with the design engineers. A construction sequence can be developed using a small scale model simulating the various stages of construction. Seeing a simulated situation dictates a conclusion to the experienced construction man which can be explained and is usually acceptable to all. The result is a unified team effort and a good constructible design. Photos of the model in a Work Plan Book provide an effective medium for transferring this planned sequence to the constructor. Slides can quickly express the plan to management and the client. Working with engineers on design models and using a standard identification program for systems and buildings can be an aid to construction. Cross-reference requirements which complicate field and office work can be minimized by developing standard identifiers for buildings and systems. Review of design models by construction men can provide access for construction, eliminate delays and costly out-of-sequence work

Program for development of high-field superconducting magnets for fusion research

International Nuclear Information System (INIS)

1975-01-01

Three superconducting magnet programs at LLL are outlined. The first program, the one considered in greatest detail, is a developmental program in which LLL will work closely with superconductor manufacturers to develop multifilamentary Nb 3 Sn superconductor suitable for use in large CTR magnets. The result of this program will be the fabrication of a rather large magnet (but one that is much smaller than future CTR magnets) and the determination of its performance limitations. In the second program, the developed multifilamentary Nb 3 Sn superconductor will be used to construct the magnets for the Fusion Engineering Research Facility (FERF) machine. In this program, the bulk of the effort will be in magnet design and winding. The third program chronologically overlaps the first two programs. This program includes the fabrication and testing of the superconducting magnets for the MX machine although, as explained in the Technical Plan, only the cost of the development work is included in this document. At the present time, Nb--Ti superconductor is being considered. Apart from some initial conductor design work, the major effort will be in magnet design and winding

DESIGN AND LICENSING TRENDS OF THE GENERAL EDUCATIONAL PROGRAMS IN LATVIA

OpenAIRE

Mihailovs, Ivans Jānis; Krūmiņa, Aira Aija

2016-01-01

The general education program designing and licensing trends in Latvia in the period from 2010 to 2014 are analyzed in the article. Based on the general education program licensing data, it found that there isn’t a trend to license author’s program in primary education, while the secondary level of education author's programs are designed and licensed more often. The fact that primary education is more licensed programs in mathematics, science and technology, but in general secondary educatio...

Breckinridge Project, initial effort. Report XI, Volume V. Critical review of the design basis. [Critical review

Energy Technology Data Exchange (ETDEWEB)

None

1982-01-01

Report XI, Technical Audit, is a compendium of research material used during the Initial Effort in making engineering comparisons and decisions. Volumes 4 and 5 of Report XI present those studies which provide a Critical Review of the Design Basis. The Critical Review Report, prepared by Intercontinental Econergy Associates, Inc., summarizes findings from an extensive review of the data base for the H-Coal process design. Volume 4 presents this review and assessment, and includes supporting material; specifically, Design Data Tabulation (Appendix A), Process Flow Sheets (Appendix B), and References (Appendix C). Volume 5 is a continuation of the references of Appendix C. Studies of a proprietary nature are noted and referenced, but are not included in these volumes. They are included in the Limited Access versions of these reports and may be reviewed by properly cleared personnel in the offices of Ashland Synthetic Fuels, Inc.

Engaging partners to initiate evaluation efforts: tactics used and lessons learned from the prevention research centers program.

Science.gov (United States)

Wright, Demia Sundra; Anderson, Lynda A; Brownson, Ross C; Gwaltney, Margaret K; Scherer, Jennifer; Cross, Alan W; Goodman, Robert M; Schwartz, Randy; Sims, Tom; White, Carol R

2008-01-01

The Centers for Disease Control and Prevention's (CDC's) Prevention Research Centers (PRC) Program underwent a 2-year evaluation planning project using a participatory process that allowed perspectives from the national community of PRC partners to be expressed and reflected in a national logic model. The PRC Program recognized the challenge in developing a feasible, useable, and relevant evaluation process for a large, diverse program. To address the challenge, participatory and utilization-focused evaluation models were used. Four tactics guided the evaluation planning process: 1) assessing stakeholders' communication needs and existing communication mechanisms and infrastructure; 2) using existing mechanisms and establishing others as needed to inform, educate, and request feedback; 3) listening to and using feedback received; and 4) obtaining adequate resources and building flexibility into the project plan to support multifaceted mechanisms for data collection. Participatory methods resulted in buy-in from stakeholders and the development of a national logic model. Benefits included CDC's use of the logic model for program planning and development of a national evaluation protocol and increased expectations among PRC partners for involvement. Challenges included the time, effort, and investment of program resources required for the participatory approach and the identification of whom to engage and when to engage them for feedback on project decisions. By using a participatory and utilization-focused model, program partners positively influenced how CDC developed an evaluation plan. The tactics we used can guide the involvement of program stakeholders and help with decisions on appropriate methods and approaches for engaging partners.

ITER plasma facing components, design and development

International Nuclear Information System (INIS)

Vieider, G.; Cardella, A.; Akiba, M.; Matera, R.; Watson, R.

1991-01-01

The paper summarizes the collaborative effort of the ITER Conceptual Design Activity (CDA) on Plasma Facing Components (PFC) which focused on the following main tasks: (a) The definition of basic design concepts for the First Wall (FW) and Divertor Plates (DP), (b) the analysis of the performance and likely lifetime of these PFC designs including the identification of major critical issues, (c) the start of R and D work giving already first results, and the definition of the required further R and D program to support the contemplated ITER Engineering Design Activity (EDA). From the ITER CDA effort on PFC it is mainly concluded that: (a) The expected PFC operating conditions lead to design solutions at the limit of present technology in particular for the divertor, which may constrain the overall machine performance, (b) the development of convincing PFC designs requires an intensified R and D effort both on PFC technology and plasma physics. (orig.)

Dewitt Wallace-Reader's Digest Fund National Library Power Program.

Science.gov (United States)

School Library Media Annual (SLMA), 1993

1993-01-01

Describes the National Library Power Program, a collaborative effort sponsored by the Dewitt Wallace-Reader's Digest Fund in cooperation with local education funds and public school districts that was designed to create public elementary and middle school library programs that are central to the education program of the school. (LRW)

Designing a leadership development program for surgeons.

Science.gov (United States)

Jaffe, Gregory A; Pradarelli, Jason C; Lemak, Christy Harris; Mulholland, Michael W; Dimick, Justin B

2016-01-01

Although numerous leadership development programs (LDPs) exist in health care, no programs have been specifically designed to meet the needs of surgeons. This study aimed to elicit practicing surgeons' motivations and desired goals for leadership training to design an evidence-based LDP in surgery. At a large academic health center, we conducted semistructured interviews with 24 surgical faculty members who voluntarily applied and were selected for participation in a newly created LDP. Transcriptions of the interviews were analyzed using analyst triangulation and thematic coding to extract major themes regarding surgeons' motivations and perceived needs for leadership knowledge and skills. Themes from interview responses were then used to design the program curriculum specifically to meet the leadership needs of surgical faculty. Three major themes emerged regarding surgeons' motivations for seeking leadership training: (1) Recognizing key gaps in their formal preparation for leadership roles; (2) Exhibiting an appetite for personal self-improvement; and (3) Seeking leadership guidance for career advancement. Participants' interviews revealed four specific domains of knowledge and skills that they indicated as desired takeaways from a LDP: (1) leadership and communication; (2) team building; (3) business acumen/finance; and (4) greater understanding of the health care context. Interviews with surgical faculty members identified gaps in prior leadership training and demonstrated concrete motivations and specific goals for participating in a formal leadership program. A LDP that is specifically tailored to address the needs of surgical faculty may benefit surgeons at a personal and institutional level. Copyright © 2016 Elsevier Inc. All rights reserved.

Design and implementation of a computer based site operations log for the ARM Program

International Nuclear Information System (INIS)

Tichler, J.L.; Bernstein, H.J.; Bobrowski, S.F.; Melton, R.B.; Campbell, A.P.; Edwards, D.M.; Kanciruk, P.; Singley, P.T.

1992-01-01

The Atmospheric Radiation Measurement (ARM) Program is a Department of Energy (DOE) research effort to reduce the uncertainties found in general circulation and other models due to the effects of clouds and solar radiation. ARM will provide an experimental testbed for the study of important atmospheric effects, particularly cloud and radiative processes, and testing of parameterizations of the processes for use in atmospheric models. The design of the testbed known as the Clouds and Radiation Testbed (CART), calls for five, long-term field data collection sites. The first site, located in the Southern Great Plains (SGP) in Lamont, OK began operation in the spring of 1992. The CART Data Environment (CDE) is the element of the testbed which acquires the basic observations from the instruments and processes them to meet the ARM requirements. A formal design was used to develop a description of the logical requirements for the CDE. This paper discusses the design and prototype implementation of a part of the CDE known as the site operations log, which records metadata defining the environment within which the data produced by the instruments is collected

Interim report on the Global Design Effort Global International Linear Collider (ILC) R&D

Energy Technology Data Exchange (ETDEWEB)

Harrison, M.

2011-04-30

The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

Standardization Efforts for Mechanical Testing and Design of Advanced Ceramic Materials and Components

Science.gov (United States)

Salem, Jonathan A.; Jenkins, Michael G.

2003-01-01

Advanced aerospace systems occasionally require the use of very brittle materials such as sapphire and ultra-high temperature ceramics. Although great progress has been made in the development of methods and standards for machining, testing and design of component from these materials, additional development and dissemination of standard practices is needed. ASTM Committee C28 on Advanced Ceramics and ISO TC 206 have taken a lead role in the standardization of testing for ceramics, and recent efforts and needs in standards development by Committee C28 on Advanced Ceramics will be summarized. In some cases, the engineers, etc. involved are unaware of the latest developments, and traditional approaches applicable to other material systems are applied. Two examples of flight hardware failures that might have been prevented via education and standardization will be presented.

Participation in multilateral effort to develop high performance integrated CPC evacuated collectors

Science.gov (United States)

Winston, R.; Ogallagher, J. J.

1992-05-01

The University of Chicago Solar Energy Group has had a continuing program and commitment to develop an advanced evacuated solar collector integrating nonimaging concentration into its design. During the period from 1985-1987, some of our efforts were directed toward designing and prototyping a manufacturable version of an Integrated Compound Parabolic Concentrator (ICPC) evacuated collector tube as part of an international cooperative effort involving six organizations in four different countries. This 'multilateral' project made considerable progress towards a commercially practical collector. One of two basic designs considered employed a heat pipe and an internal metal reflector CPC. We fabricated and tested two large diameter (125 mm) borosilicate glass collector tubes to explore this concept. The other design also used a large diameter (125 mm) glass tube but with a specially configured internal shaped mirror CPC coupled to a U-tube absorber. Performance projections in a variety of systems applications using the computer design tools developed by the International Energy Agency (IEA) task on evacuated collectors were used to optimize the optical and thermal design. The long-term goal of this work continues to be the development of a high efficiency, low cost solar collector to supply solar thermal energy at temperatures up to 250 C. Some experience and perspectives based on our work are presented and reviewed. Despite substantial progress, the stability of research support and the market for commercial solar thermal collectors were such that the project could not be continued. A cooperative path involving university, government, and industrial collaboration remains the most attractive near term option for developing a commercial ICPC.

Reliability in the design phase

International Nuclear Information System (INIS)

Siahpush, A.S.; Hills, S.W.; Pham, H.; Majumdar, D.

1991-12-01

A study was performed to determine the common methods and tools that are available to calculated or predict a system's reliability. A literature review and software survey are included. The desired product of this developmental work is a tool for the system designer to use in the early design phase so that the final design will achieve the desired system reliability without lengthy testing and rework. Three computer programs were written which provide the first attempt at fulfilling this need. The programs are described and a case study is presented for each one. This is a continuing effort which will be furthered in FY-1992. 10 refs

Usability Issues in the Design of Novice Programming Systems,

Science.gov (United States)

1996-08-01

lists this as a design principle for novice programming environments. In traditional compiled languages, beginners are also confused by the need to...programming task external knowledge that might interfere with correct under- standing of the language. Most beginner programming errors can be...language for text editing, but [Curtis 1988] found that a textual pseudocode and graphical flowcharts were both bet- ter than natural language in program

A review of efforts to restructure Texas' electricity market

International Nuclear Information System (INIS)

Zarnikau, Jay

2005-01-01

Comparisons suggest that Texas has been relatively successful in its efforts to introduce greater competition and customer choice into its unique electricity market (Center for Advancement of Electricity Markets, 2002). Yet, Texas has defied many of the common prescriptions in designing its market. Texas has yet to establish a nodal congestion management system that directly assigns local congestion costs to entities responsible for creating transmission congestion. A liquid power exchange or spot market is absent. Programs designed to encourage demand side responsiveness had a slow start. Market concentration remains high. Market oversight activities are poorly funded. A generation adequacy mechanism or planning reserve margin requirement remains under debate. Has Texas simply been lucky in averting any real disasters? Or are these market features less important than commonly recognized? This article reviews the restructuring initiative and reports some key lessons learned following the first twenty months under the new wholesale market structure and fifteen months of retail competition

A review of efforts to restructure Texas' electricity market

International Nuclear Information System (INIS)

Zarnikau, J.

2005-01-01

Comparisons suggest that Texas has been relatively successful in its efforts to introduce greater competition and customer choice into its unique electricity market (Center for Advancement of Electricity Markets, 2002). Yet, Texas has defied many of the common prescriptions in designing its market. Texas has yet to establish a nodal congestion management system that directly assigns local congestion costs to entities responsible for creating transmission congestion. A liquid power exchange or spot market is absent. Programs designed to encourage demand side responsiveness had a slow start. Market concentration remains high. Market oversight activities are poorly funded. A generation adequacy mechanism or planning reserve margin requirement remains under debate. Has Texas simply been lucky in averting any real disasters? Or are these market features less important than commonly recognized? This article reviews the restructuring initiative and reports some key lessons learned following the first twenty months under the new wholesale market structure and fifteen months of retail competition. (author)

Environmental qualification program for new designs

International Nuclear Information System (INIS)

Doerffer, K.

2007-01-01

Qualification of nuclear power plant equipment and components important to safety (ITS) is an integral part of the design process. The qualification methodology differs based on the severity of service conditions (operational and ambient), to which the ITS equipment is exposed. In Canada, the licensing requirements for environmental qualification for new designs are governed by the Canadian Standard Association (CSA) standard, N290.13-2005 titled 'Environmental Qualification of Equipment for CANDU Nuclear Power Plants' and the pre-consultation draft, 'Requirements for Design of Nuclear Power Plants'(DRD), issued for trial use by the Canadian Nuclear Safety Commission (CNSC) in March 2005. This paper will describe AECL's current Environmental Qualification program developed to comply with the above licensing requirements as applied to new designs. The focus will be given to qualification of ITS systems structures and components (SSC) to harsh conditions occurring due to the Design Basis Accidents (DBA). (author)

GRAPHIC, time-sharing magnet design computer programs at Argonne

International Nuclear Information System (INIS)

Lari, R.J.

1974-01-01

This paper describes three magnet design computer programs in use at the Zero Gradient Synchrotron of Argonne National Laboratory. These programs are used in the time sharing mode in conjunction with a Tektronix model 4012 graphic display terminal. The first program in called TRIM, the second MAGNET, and the third GFUN. (U.S.)

Canadian fuel development program

International Nuclear Information System (INIS)

Gacesa, M.; Young, E.G.

1992-11-01

CANDU power reactor fuel has demonstrated an enviable operational record. More than 99.9% of the bundles irradiated have provided defect-free service. Defect excursions are responsible for the majority of reported defects. In some cases research and development effort is necessary to resolve these problems. In addition, development initiatives are also directed at improvements of the current design or reduction of fueling cost. The majority of the funding for this effort has been provided by COG (CANDU Owners' Group) over the past 10 to 15 years. This paper contains an overview of some key fuel technology programs within COG. The CANDU reactor is unique among the world's power reactors in its flexibility and its ability to use a number of different fuel cycles. An active program of analysis and development, to demonstrate the viability of different fuel cycles in CANDU, has been funded by AECL in parallel with the work on the natural uranium cycle. Market forces and advances in technology have obliged us to reassess and refocus some parts of our effort in this area, and significant success has been achieved in integrating all the Canadian efforts in this area. This paper contains a brief summary of some key components of the advanced fuel cycle program. (Author) 4 figs., tab., 18 refs

Design and validation of general biology learning program based on scientific inquiry skills

Science.gov (United States)

Cahyani, R.; Mardiana, D.; Noviantoro, N.

2018-03-01

Scientific inquiry is highly recommended to teach science. The reality in the schools and colleges is that many educators still have not implemented inquiry learning because of their lack of understanding. The study aims to1) analyze students’ difficulties in learning General Biology, 2) design General Biology learning program based on multimedia-assisted scientific inquiry learning, and 3) validate the proposed design. The method used was Research and Development. The subjects of the study were 27 pre-service students of general elementary school/Islamic elementary schools. The workflow of program design includes identifying learning difficulties of General Biology, designing course programs, and designing instruments and assessment rubrics. The program design is made for four lecture sessions. Validation of all learning tools were performed by expert judge. The results showed that: 1) there are some problems identified in General Biology lectures; 2) the designed products include learning programs, multimedia characteristics, worksheet characteristics, and, scientific attitudes; and 3) expert validation shows that all program designs are valid and can be used with minor revisions. The first section in your paper.

Space Transportation Engine Program (STEP), phase B

Science.gov (United States)

1990-01-01

The Space Transportation Engine Program (STEP) Phase 2 effort includes preliminary design and activities plan preparation that will allow smooth and time transition into a Prototype Phase and then into Phases 3, 4, and 5. A Concurrent Engineering approach using Total Quality Management (TQM) techniques, is being applied to define an oxygen-hydrogen engine. The baseline from Phase 1/1' studies was used as a point of departure for trade studies and analyses. Existing STME system models are being enhanced as more detailed module/component characteristics are determined. Preliminary designs for the open expander, closed expander, and gas generator cycles were prepared, and recommendations for cycle selection made at the Design Concept Review (DCR). As a result of July '90 DCR, and information subsequently supplied to the Technical Review Team, a gas generator cycle was selected. Results of the various Advanced Development Programs (ADP's) for the Advanced Launch Systems (ALS) were contributive to this effort. An active vehicle integration effort is supplying the NASA, Air Force, and vehicle contractors with engine parameters and data, and flowing down appropriate vehicle requirements. Engine design and analysis trade studies are being documented in a data base that was developed and is being used to organize information. To date, seventy four trade studies were input to the data base.

A CAD (Classroom Assessment Design) of a Computer Programming Course

Science.gov (United States)

Hawi, Nazir S.

2012-01-01

This paper presents a CAD (classroom assessment design) of an entry-level undergraduate computer programming course "Computer Programming I". CAD has been the product of a long experience in teaching computer programming courses including teaching "Computer Programming I" 22 times. Each semester, CAD is evaluated and modified…

Designing fractional factorial split-plot experiments using integer programming

DEFF Research Database (Denmark)

Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

2011-01-01

factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

Minimizing Experimental Setup Time and Effort at APS beamline 1-ID through Instrumentation Design

Energy Technology Data Exchange (ETDEWEB)

Benda, Erika; Almer, Jonathan; Kenesei, Peter; Mashayekhi, Ali; Okasinksi, John; Park, Jun-Sang; Ranay, Rogelio; Shastri, Sarvijt

2016-01-01

Sector 1-ID at the APS accommodates a number of dif-ferent experimental techniques in the same spatial enve-lope of the E-hutch end station. These include high-energy small and wide angle X-ray scattering (SAXS and WAXS), high-energy diffraction microscopy (HEDM, both near and far field modes) and high-energy X-ray tomography. These techniques are frequently combined to allow the users to obtain multimodal data, often attaining 1 μm spatial resolution and <0.05º angular resolution. Furthermore, these techniques are utilized while the sam-ple is thermo-mechanically loaded to mimic real operat-ing conditions. The instrumentation required for each of these techniques and environments has been designed and configured in a modular way with a focus on stability and repeatability between changeovers. This approach allows the end station to be more versatile, capable of collecting multi-modal data in-situ while reducing time and effort typically required for set up and alignment, resulting in more efficient beam time use. Key instrumentation de-sign features and layout of the end station are presented.

Designing instrumented walker to measure upper-extremity's efforts: A case study.

Science.gov (United States)

Khodadadi, Mohammad; Baniasad, Mina Arab; Arazpour, Mokhtar; Farahmand, Farzam; Zohoor, Hassan

2018-02-26

The high prevalence of shoulder pain in using walkers in patients who have spinal cord injury (SCI). Also, the limited options available to economically measure grip forces in walkers, which drove the need to create one. This article describes a method to obtain upper-extremities' forces and moments in a person with SCI by designing an appropriate instrumented walker. First, since the commercial multidirectional loadcells are too expensive, custom loadcells are fabricated. Ultimately, a complete gait analysis by means of VICON motion analysis and using inverse dynamic method has been held to measure upper-extremities' efforts. The results for a person with SCI using a two-wheel walker in low and high heights and a basic walker show that there are higher shoulder and elbow flexion-extension moments and also higher shoulder forces in superior-inferior direction and higher elbow and wrist forces in anterior-posterior directions. The results are not much different in using two different types of walker. By using the proposed method, upper-extremities' forces and moments were obtained and the results were compared to each other in using two different walkers.

Project W-236A, work plan for preparation of a design requirements document

International Nuclear Information System (INIS)

Groth, B.D.

1995-01-01

This work plan outlines the tasks necessary, and defines the organizational responsibilities for preparing a Design Requirements Document (DRD) for project W-236A, Multi-Function Waste Tank Facility (MWTF). A DRD is a Systems Engineering document which bounds, at a high level, the requirements of a discrete system element of the Tank Waste Remediation System (TWRS) Program. This system element is usually assigned to a specific project, in this case the MWTF. The DRD is the document that connects the TWRS program requirements with the highest level projects requirements and provides the project's link to the overall TWRS mission. The MWTF DRD effort is somewhat unique in that the project is already in detailed design, whereas a DRO is normally prepared prior to preliminary design. The MWTF design effort was initiated with a Functional Design Criteria (FDC) and a Supplemental Design Requirements Document (SDRD) bounding the high level requirements. Another unique aspect of this effort is that some of the TWRS program requirements are still in development. Because of these unique aspects of the MWTF DRD development, the MWTF will be developed from existing TWRS Program requirements and project specific requirements contained in the FDC and SDRD. The following list describes the objectives of the MWTF DRD: determine the primary functions of the tanks through a functional decomposition of the TWRS Program high level functions; allocate the primary functions to a sub-system architecture for the tanks; define the fundamental design features in terms of performance requirements for the system and subsystems; identify system interfaces and design constraints; and document the results in a DRD

Consideration of a Learning Programming Process based on Software Design for Beginners

OpenAIRE

大村, 基将; 紅林, 秀治

2016-01-01

We considered a learning programming process based on software design for technology education. Lessons of computer program-aided measurement and control are for beginners to learn programming. These lessons are efficient to learn the step of programming, but the main of the lessons are works of typing the sample programming and debugging. Therefore, these lessons have a fundamental lack of the concept of design. Then we considered learning processes of programming and applied the process of ...

DUKSUP: A Computer Program for High Thrust Launch Vehicle Trajectory Design and Optimization

Science.gov (United States)

Spurlock, O. Frank; Williams, Craig H.

2015-01-01

From the late 1960s through 1997, the leadership of NASAs Intermediate and Large class unmanned expendable launch vehicle projects resided at the NASA Lewis (now Glenn) Research Center (LeRC). One of LeRCs primary responsibilities --- trajectory design and performance analysis --- was accomplished by an internally-developed analytic three dimensional computer program called DUKSUP. Because of its Calculus of Variations-based optimization routine, this code was generally more capable of finding optimal solutions than its contemporaries. A derivation of optimal control using the Calculus of Variations is summarized including transversality, intermediate, and final conditions. The two point boundary value problem is explained. A brief summary of the codes operation is provided, including iteration via the Newton-Raphson scheme and integration of variational and motion equations via a 4th order Runge-Kutta scheme. Main subroutines are discussed. The history of the LeRC trajectory design efforts in the early 1960s is explained within the context of supporting the Centaur upper stage program. How the code was constructed based on the operation of the AtlasCentaur launch vehicle, the limits of the computers of that era, the limits of the computer programming languages, and the missions it supported are discussed. The vehicles DUKSUP supported (AtlasCentaur, TitanCentaur, and ShuttleCentaur) are briefly described. The types of missions, including Earth orbital and interplanetary, are described. The roles of flight constraints and their impact on launch operations are detailed (such as jettisoning hardware on heating, Range Safety, ground station tracking, and elliptical parking orbits). The computer main frames on which the code was hosted are described. The applications of the code are detailed, including independent check of contractor analysis, benchmarking, leading edge analysis, and vehicle performance improvement assessments. Several of DUKSUPs many major impacts on

Spanish program of advanced Nuclear Power Plants

International Nuclear Information System (INIS)

Marco, M.; Redon, R.

1993-01-01

The energy Spanish Plan is promoting some actions within the area of advanced reactors. Efforts are focussed onto the European Program of Advanced Reactors, the Program of Passive Plants (EPRI), European Fast Reactor Project and the APWR-1000 Program of INI. Electrical sector utilities and industrial partners supported by the Administration have organized an steering committee. The program of Passive Plants includes activities on Qualification, design and detailed engineering (Qualification project, SBWR project of G.E. and AP600 Project of Westinghouse. The european project on advanced plants has the following Spanish contribution: Analysis of alternative Dossier on European requisites (EUR) and Design of an European Reactor (EPR)

Summary of process research analysis efforts

Science.gov (United States)

Burger, D. R.

1985-01-01

A summary of solar-cell process research analysis efforts was presented. Process design and cell design are interactive efforts where technology from integrated circuit processes and other processes are blended. The primary factors that control cell efficiency are: (1) the bulk parameters of the available sheet material, (2) the retention and enhancement of these bulk parameters, and (3) the cell design and the cost to produce versus the finished cells performance. The process sequences need to be tailored to be compatible with the sheet form, the cell shape form, and the processing equipment. New process options that require further evaluation and utilization are lasers, robotics, thermal pulse techniques, and new materials. There are numerous process control techniques that can be adapted and used that will improve product uniformity and reduced costs. Two factors that can lead to longer life modules are the use of solar cell diffusion barriers and improved encapsulation.

Design for reliability: NASA reliability preferred practices for design and test

Science.gov (United States)

Lalli, Vincent R.

1994-01-01

This tutorial summarizes reliability experience from both NASA and industry and reflects engineering practices that support current and future civil space programs. These practices were collected from various NASA field centers and were reviewed by a committee of senior technical representatives from the participating centers (members are listed at the end). The material for this tutorial was taken from the publication issued by the NASA Reliability and Maintainability Steering Committee (NASA Reliability Preferred Practices for Design and Test. NASA TM-4322, 1991). Reliability must be an integral part of the systems engineering process. Although both disciplines must be weighed equally with other technical and programmatic demands, the application of sound reliability principles will be the key to the effectiveness and affordability of America's space program. Our space programs have shown that reliability efforts must focus on the design characteristics that affect the frequency of failure. Herein, we emphasize that these identified design characteristics must be controlled by applying conservative engineering principles.

Designing Interventions that Last: A Classification of Environmental Behaviors in Relation to the Activities, Costs, and Effort Involved for Adoption and Maintenance

Science.gov (United States)

Moore, Harriet E.; Boldero, Jennifer

2017-01-01

Policy makers draw on behavioral research to design interventions that promote the voluntary adoption of environmental behavior in societies. Many environmental behaviors will only be effective if they are maintained over the long-term. In the context of climate change and concerns about future water security, behaviors that involve reducing energy consumption and improving water quality must be continued indefinitely to mitigate global warming and preserve scarce resources. Previous reviews of environmental behavior have focused exclusively on factors related to adoption. This review investigates the factors that influence both adoption and maintenance, and presents a classification of environmental behaviors in terms of the activities, costs, and effort required for both adoption and maintenance. Three categories of behavior are suggested. One-off behaviors involve performing an activity once, such as purchasing an energy efficient washing machine, or signing a petition. Continuous behaviors involve the performance of the same set of behaviors for adoption and for maintenance, such as curbside recycling. Dynamic behaviors involve the performance of different behaviors for adoption and maintenance, such as revegetation. Behaviors can also be classified into four categories related to cost and effort: those that involve little cost and effort for adoption and maintenance, those that involve moderate cost and effort for adoption and maintenance, those that involve a high cost or effort for adoption and less for maintenance, and those that involve less cost or effort for adoption and a higher amount for maintenance. In order to design interventions that last, policy makers should consider the factors that influence the maintenance as well as the adoption of environmental behaviors. PMID:29163265

Design-reliability assurance program application to ACP600

International Nuclear Information System (INIS)

Zhichao, Huang; Bo, Zhao

2012-01-01

ACP600 is a newly nuclear power plant technology made by CNNC in China and it is based on the Generation III NPPs design experience and general safety goals. The ACP600 Design Reliability Assurance Program (D-RAP) is implemented as an integral part of the ACP600 design process. A RAP is a formal management system which assures the collection of important characteristic information about plant performance throughout each phase of its life and directs the use of this information in the implementation of analytical and management process which are specifically designed to meet two specific objects: confirm the plant goals and cost effective improvements. In general, typical reliability assurance program have 4 broad functional elements: 1) Goals and performance criteria; 2) Management system and implementing procedures; 3) Analytical tools and investigative methods; and 4) Information management. In this paper we will use the D-RAP technical and Risk-Informed requirements, and establish the RAM and PSA model to optimize the ACP600 design. Compared with previous design process, the D-RAP is more competent for the higher design targets and requirements, enjoying more creativity through an easier implementation of technical breakthroughs. By using D-RAP, the plants goals, system goals, performance criteria and safety criteria can be easier to realize, and the design can be optimized and more rational

Superconducting technology program Sandia 1996 annual report

International Nuclear Information System (INIS)

Roth, E.P.

1997-02-01

Sandia's Superconductivity Technology Program is a thallium-based high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, open-system thick film conductor development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The research efforts currently underway are: (1) Process development and characterization of thallium-based high-temperature superconducting closed system wire and tape, (2) Investigation of the synthesis and processing of thallium-based thick films using two-zone processing, and (3) Cryogenic design of a 30K superconducting motor. This report outlines the research that has been performed during FY96 in each of these areas

EGUN: An electron optics and gun design program

International Nuclear Information System (INIS)

Herrmannsfeldt, W.B.

1988-10-01

The name EGUN has become commonly associated with the program also known as the SLAC Electron Trajectory Program. This document is an updated version of SLAC-226, published in 1979. The program itself has had substantial upgrading since then, but only a few new features are of much concern to the user. Most of the improvements are internal and are intended to improve speed or accuracy. EGUN is designed to compute trajectories of charged particles in electrostatic and magnetostatic fields, including the effects of space charge and self-magnetic fields. Starting options include Child's Law conditions on cathodes of various shapes, as well as used specified initial conditions. Either rectangular or cylindrical symmetry may be used. In the new jargon, the program is a 2-1/2 dimension code meaning 2-D in all fields and 3-D in all particle motion. A Poisson's Equation Solver is used to find the electrostatic fields by using difference equations derived from the boundary conditions. Magnetic fields are to be specified externally, by the user, by using one of several methods including data from another program or arbitrary configurations of coils. This edition of the documentation also covers the program EGN87c, which is a recently developed version of EGUN designed to be used on the newer models of personal computers, small main frames, work stations, etc. The EGN87c program uses the programming language C which is very transportable so the program should operate on any system that supports C. Plotting routines for most common PC monitors are included, and the capability to make hard copy plots on dot-matrix printer-plotters is provided. 18 refs., 7 figs

System 80+ Design and Licensing : Improving Plant Reliability

International Nuclear Information System (INIS)

Newman, Robert E.

1989-01-01

The U. S. nuclear industry is striving to improve plant reliability and availability through improved plant design, component designs and plant maintenance. In an effort to improve safety and to demonstrate that commercial nuclear power is economically competitive with other energy sources, the utilities, nuclear vendors, architect engineers and constructors, and component suppliers are all participating in an industry-wide effort to develop improved Light Water Reactor (LWR) designs that are based upon the many years of successful LWR operation. In an age when the world faces the environmental pressures of the greenhouse effect and acid rain, electricity generated from nuclear energy must play an increasing role in the energy picture of Korea, the United States and the rest of the world. This paper discusses the plant availability requirement that has been established by the industry-wide effort mentioned above. After briefly describing Combustion Engineering's program for development of the System 80 Plus standard design and the participation of the Korea Advanced Energy Research Institute (KAERI) in the program, the paper then describes the design features that are being incorporated into System 80+. The industry ALRR Program has established a very ambitious criterion of 87% for the plant availability of future nuclear units. To satisfy such a requirement, the next generation of nuclear plants will include a great many design improvements that reflect the hundreds of years of operating experience that we have accrued. C-ESA's System 80+ will include a number of design changes that improve operating margins and make the plant easier to operate and maintain. Not surprisingly, there is a great deal of overlap between improved safety and improved reliability. In the end, our design will satisfy the future needs of the utilities, the regulators, and the public. C-E is very pleased that KAERI is working with US to achieve these important goals

Transfusion-related adverse reactions: From institutional hemovigilance effort to National Hemovigilance program

Directory of Open Access Journals (Sweden)

Rahul Vasudev

2016-01-01

Full Text Available Aims: In this study we have evaluated the various adverse reactions related to transfusion occurring in our institution as a pilot institutional effort toward a hemovigilance program. This study will also help in understanding the problems faced by blood banks/Transfusion Medicine departments in implementing an effective hemovigilance program. Materials and Methods: All the adverse reactions related to transfusion of whole blood and its components in various clinical specialties were studied for a period of 1 year. Any transfusion-related adverse event was worked up in accordance with guidelines laid down by the Directorate General of Health Services (DGHS and departmental standard operating procedures. Results: During the study period from November 1, 2011 to October 31, 2012, 45812 components were issued [30939 WB/PRBC; 12704 fresh frozen plasma (FFP; 2169 platelets]. Risk estimation per 1000 units of red cells (WB/PRBC transfused was estimated to be: 0.8 for febrile nonhemolytic transfusion reaction (FNHTR, 0.7 for allergic reaction, 0.19 for acute hemolytic transfusion reaction (AcHTR, 0.002 for anaphylactoid reactions, 0.1 for bacterial sepsis, and 0.06 for hypervolemia and hypocalcemia. 0.09 is the risk for delayed transfusion reaction and 0.03 is the risk for transfusion-related acute lung injury (TRALI. Risk estimate per 1,000 units of platelets transfused was estimated to be 1.38 for FNHTR, 1.18 for allergic reaction, and 1 in case of bacterial sepsis. Risk estimation per 1,000 units of FFP was estimated to be 0.15 for FNHTR and 0.2 for allergic reactions. Conclusions: Factors such as clerical checks at various levels, improvement in blood storage conditions outside blood banks, leukodepletion, better inventory management, careful donor screening, bedside monitoring of transfusion, and documentation of adverse events may decrease transfusion-related adverse events. Better coordination between transfusion specialists and various clinical

Trends in CAD education in interior design programs

OpenAIRE

Ko, Hye Mi

1990-01-01

This research investigated Computer Aided Design (CAD) education in the interior design. program focusing on educators' opinions about creativity aspects including computer application, teaching materials and teaching methods as well as other trends in CAD education. A questionnaire was sent to one hundred eighty-two members of the Interior Design Educators Council (IDEC). A frequency distribution was used on 69 usable returned surveys to describe the sample characteristi...

Building interactive simulations in a Web page design program.

Science.gov (United States)

Kootsey, J Mailen; Siriphongs, Daniel; McAuley, Grant

2004-01-01

A new Web software architecture, NumberLinX (NLX), has been integrated into a commercial Web design program to produce a drag-and-drop environment for building interactive simulations. NLX is a library of reusable objects written in Java, including input, output, calculation, and control objects. The NLX objects were added to the palette of available objects in the Web design program to be selected and dropped on a page. Inserting an object in a Web page is accomplished by adding a template block of HTML code to the page file. HTML parameters in the block must be set to user-supplied values, so the HTML code is generated dynamically, based on user entries in a popup form. Implementing the object inspector for each object permits the user to edit object attributes in a form window. Except for model definition, the combination of the NLX architecture and the Web design program permits construction of interactive simulation pages without writing or inspecting code.

Designing and Implementing a Mentoring Program to Support Clinically-Based Teacher Education

Science.gov (United States)

Henning, John E.; Gut, Dianne; Beam, Pamela

2015-01-01

This article describes one teacher preparation program's approach to designing and implementing a mentoring program to support clinically-based teacher education. The design for the program is based on an interview study that compared the mentoring experiences of 18 teachers across three different contexts: student teaching, early field…

Design and Development of an MPH Program for Distance Education Delivery

OpenAIRE

Steven R. Hawks

2008-01-01

The Master-s of Public Health (MPH) degree is growing in popularity among a number of higher education institutions throughout the world as a distance education graduate program. This paper offers an overview of program design and development strategies that promote successful distance delivery of MPH programs. Design and development challenges are discussed in terms of type of distance delivery, accreditation, student demand, faculty development, user needs, course conte...

Designing an Elderly Assistance Program Based-on Home Care

Science.gov (United States)

Umusya'adah, L.; Juwaedah, A.; Jubaedah, Y.; Ratnasusanti, H.; Puspita, R. H.

2018-02-01

PKH (Program Keluarga Harapan) is a program of Indonesia’s Government through the ministry of social directorate to accelerate the poverty reduction and the achievement of Millennium Development Goals (MDGs) target as well as the policies development in social protection and social welfare domain or commonly referred to as Indonesian Conditional Cash Transfer (CCT) Program. This research is motivated that existing participants of the family expectation program (PKH) that already exist in Sumedang, Indoensia, especially in the South Sumedang on the social welfare components is only limited to the health checking, while for assisting the elderly based Home Care program there has been no structured and systematic, where as the elderly still need assistance, especially from the family and community environment. This study uses a method of Research and Development with Model Addie which include analysis, design, development, implementation and evaluation. Participants in this study using purposive sampling, where selected families of PKH who provide active assistance to the elderly with 82 participants. The program is designed consists of program components: objectives, goals, forms of assistance, organizing institutions and implementing the program, besides, program modules include assisting the elderly. Form of assistance the elderly cover physical, social, mental and spiritual. Recommended for families and companions PKH, the program can be implemented to meet the various needs of the elderly. For the elderly should introspect, especially in the health and follow the advice recommended by related parties

Design of an internal dosimetry program

International Nuclear Information System (INIS)

Wu, C.F.; Goff, T.E.

2004-01-01

Measurement of radiation dose is an essential element of radiation protection programs at nuclear facilities. To protect workers and demonstrate compliance with regulatory requirements, dosimetry programs must be established based on sound technical basis. Historically, external exposure was controlled by occupational dose limits. Internal exposure to radionuclides was limited by maximum permissible body burden and maximum permissible concentration. With the issuance of ICRP 26, ICRP 30, DOE Order 5480.11, DOE/EH-0256T, and the new 10 CFR 20, it has become a requirement that internal dose be assessed and the sum of internal and external doses be maintained below regulatory limits. Nuclear facilities are required to have internal dose evaluation programs adequate to demonstrate compliance with radiation protection standards (RPSs). The Waste Isolation Pilot Plant is a DOE facility designed to demonstrate safe disposal of transuranic (TRU) wastes in an ancient salt bed 2,150 feet underground. Internal dose measurement is required to support waste handling activities. This paper describes the technical basis for the WIPP Internal Dosimetry Program. (author)

Application Design Of Interactive Multimedia Development Based Motion Graphic On Making Fashion Design Learning In Digital Format

OpenAIRE

Winwin Wiana

2017-01-01

This study is a research and development aimed at developing multimedia interactive learning based animation as an effort to improve student learning motivation in learning Fashion Design Technology apart from this study also aims to design a learning program courses Fashion Design Technology with a focus on optimizing the use of interactive media in learning process. From this study showed 1 A preliminary study found that the problems faced by students when studying Fashion Design Technology...

Effect of Active Videogames on Underserved Children's Classroom Behaviors, Effort, and Fitness.

Science.gov (United States)

Gao, Zan; Lee, Jung Eun; Pope, Zachary; Zhang, Dachao

2016-09-30

The purpose of this study was to examine the effect of active videogames (AVGs) on underserved minority children's on-task classroom behavior, academic effort, and fitness. A one group pre- and posttest repeated measures design was used. In Fall 2013, 95 fourth grade children (57 boys, 38 girls; 96% of minority) from three classes at an underserved urban elementary school participated in teacher-supervised AVG activities (e.g., Wii Sports, Xbox Just Dance). Specifically, students participated in a 50-minute weekly AVG program at school for 6 weeks. Children's academic effort was evaluated by classroom teachers using a validated scale that assessed activity, attention, conduct, and social/emotional behavior. Moreover, children's classroom behavior was observed immediately before and after each AVG session by trained researchers. Finally, cardiovascular fitness was also measured. A paired t-test was used to assess teacher-rated student effort, while one-way (gender) analysis of variance (ANOVA) with repeated measures was performed to analyze children's on-task classroom behavior. There was a significant effect on children's effort between the first (mean = 3.24, SD = 0.75) and last week (mean = 3.41, SD = 0.73) assessments, t = 2.42, P = 0.02. In addition, there was a significant effect on classroom behavior, F = 33.103, P < 0.01. In detail, children scored significantly higher on on-task behavior during the post-AVG observation (mean = 81.4, SD = 12.3) than seen during the pre-AVG observation (mean = 69.8, SD = 14.9). However, no main effect was indicated for gender, F = 0.39, P = 0.54. No significant improvement in cardiovascular fitness was observed, although slight improvements were seen. Offering an AVG program at school could improve underserved minority children's classroom on-task behavior and academic effort. Future studies may include a control group to further confirm the effectiveness of AVG

The Hemingway Project: A Collaborative School-based Program for Teacher Certification.

Science.gov (United States)

Butler, Shannon K.; And Others

At Weber State University (Utah), teacher educators have collaborated with English faculty to design a pilot program (Hemingway Project) which serves as an initial effort to restructure the teacher education program. The program, funded by the Hemingway Foundation, is intended to provide greater integration of the university experience with actual…

Analysis Efforts Supporting NSTX Upgrades

International Nuclear Information System (INIS)

Zhang, H.; Titus, P.; Rogoff, P.; Zolfaghari, A.; Mangra, D.; Smith, M.

2010-01-01

The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

Multimedia programming using Max/MSP and TouchDesigner

CERN Document Server

Lechner, Patrik

2014-01-01

If you want to learn how to use Max 6 and/or TouchDesigner, or work in audio-visual real-time processing, this is the book for you. It is intended for intermediate users of both programs and can be helpful for artists, designers, musicians, VJs, and researchers. A basic understanding of audio principles is advantageous.

Pioneering efforts to control AIDS. Review: IHO.

Science.gov (United States)

Chatterji, A; Sehgal, K

1995-01-01

The Indian Health Organisation (IHO) is a nongovernmental organization based in Bombay with more than 12 years experience in HIV/AIDS prevention and control efforts. It has attacked ignorance and prejudice via communication efforts. IHO has created a bond with some hospital systems of Bombay. IHO disseminated information about HIV/AIDS in Bombay's red light districts and has bridged the gap between the city's medical establishment and the community most in need. IHO's aggressive street-level fighting in a sector replete with sensitive issues has somewhat isolated it from mainstream national NGOs involved in HIV/AIDS education and control as well as from the medical establishment and potential partners. IHO funds have been reduced, forcing IHO to reduce intervention programs and responses to field demands. It suffers from a high rate of turnover among middle management staff. IHO's chief advantage is its confidence gained over the past 12 years. IHO has clearly delineated the direction it wants to go: care and support programs for persons affected by HIV/AIDS and for commercial sex workers to allow them to quit prostitution, orphan care, and development of training institutions for the education and motivation of medical personnel on HIV/AIDS care and prevention. It plans to build a hospice for AIDS patients and orphans and a training center. Training activities will vary from one-week orientation programs to three-month certificate courses for medical workers, NGOs, and managers from the commercial sector. IHO is prepared to share its experiences in combating HIV/AIDS in Bombay in a team effort. As official and bilateral funding has been decreasing, IHO has targeted industry for funding. Industry has responded, which enables IHO to sustain its core programs and approaches. IHO observations show a decrease in the number of men visiting red-light districts. IHO enjoys a positive relationship with Bombay's media reporting on AIDS.

Method and simulation program informed decisions in the early stages of building design

DEFF Research Database (Denmark)

Petersen, Steffen; Svendsen, Svend

2010-01-01

variations. The program then presents the output in a way that enables designers to make informed decisions. The method and the program reduce the need for design iterations, reducing time consumption and construction costs, to obtain the intended energy performance and indoor environment....... for making informed decisions in the early stages of building design to fulfil performance requirements with regard to energy consumption and indoor environment. The method is operationalised in a program that utilises a simple simulation program to make performance predictions of user-defined parameter......The early stages of building design include a number of decisions which have a strong influence on the performance of the building throughout the rest of the process. It is therefore important that designers are aware of the consequences of these design decisions. This paper presents a method...

Designing a flood-risk education program in the Netherlands

NARCIS (Netherlands)

Bosschaert, A.; van der Schee, J.; Kuiper, W.

2016-01-01

This study focused on designing a flood-risk education program to enhance 15-year-old students’ flood-risk perception. In the flood-risk education program, learning processes were modeled in such a way that the arousal of moderate levels of fear should prompt experiential and analytical information

Analysis of Combined Data from Heterogeneous Study Designs: A Methodological Proposal from the Patient Navigation Research program

Science.gov (United States)

Roetzheim, Richard G.; Freund, Karen M.; Corle, Don K.; Murray, David M.; Snyder, Frederick R.; Kronman, Andrea C.; Jean-Pierre, Pascal; Raich, Peter C.; Holden, Alan E. C.; Darnell, Julie S.; Warren-Mears, Victoria; Patierno, Steven; Design, PNRP; Committee, Analysis

2013-01-01

Background The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, each employing its own unique study design. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from members of the PNRP Design and Analysis Committee Purpose To review possible methodologies for analyzing combined data arising from heterogeneous study designs. Methods The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. Conclusions were based on simple consensus. The five approaches reviewed included: 1) Analyzing and reporting each project separately, 2) Combining data from all projects and performing an individual-level analysis, 3) Pooling data from projects having similar study designs, 4) Analyzing pooled data using a prospective meta analytic technique, 5) Analyzing pooled data utilizing a novel simulated group randomized design. Results Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and in their impact from differing project sample sizes. Limitations The conclusions reached were based on expert opinion and not derived from actual analyses performed. Conclusions The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multi-site community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become

Analysis of combined data from heterogeneous study designs: an applied example from the patient navigation research program.

Science.gov (United States)

Roetzheim, Richard G; Freund, Karen M; Corle, Don K; Murray, David M; Snyder, Frederick R; Kronman, Andrea C; Jean-Pierre, Pascal; Raich, Peter C; Holden, Alan Ec; Darnell, Julie S; Warren-Mears, Victoria; Patierno, Steven

2012-04-01

The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, with similar clinical criteria but with different study designs. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed-upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from the members of the PNRP Design and Analysis Committee. To review possible methodologies for analyzing combined data arising from heterogeneous study designs. The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. The conclusions were based on simple consensus. The five approaches reviewed included the following: (1) analyzing and reporting each project separately, (2) combining data from all projects and performing an individual-level analysis, (3) pooling data from projects having similar study designs, (4) analyzing pooled data using a prospective meta-analytic technique, and (5) analyzing pooled data utilizing a novel simulated group-randomized design. Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and to accommodate differing project sample sizes. The conclusions reached were based on expert opinion and not derived from actual analyses performed. The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multisite community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become more salient

Mississippi Curriculum Framework for Drafting and Design Technology (Program CIP: 48.0102--Architectural Drafting Technology) (Program CIP: 48.0101--General Drafting). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the two course sequences of the state's postsecondary-level drafting and design technology program: architectural drafting technology and drafting and design technology. Presented first are a program description and…

Improvement in Product Development: Use of back-end data to support upstream efforts of Robust Design Methodology

Directory of Open Access Journals (Sweden)

Vanajah Siva

2012-12-01

Full Text Available In the area of Robust Design Methodology (RDM less is done on how to use and work with data from the back-end of the product development process to support upstream improvement. The purpose of this paper is to suggest RDM practices for the use of customer claims data in early design phases as a basis for improvements. The back-end data, when systematically analyzed and fed back into the product development process, aids in closing the product development loop from claims to improvement in the design phase. This is proposed through a flow of claims data analysis tied to an existing tool, namely Failure Mode and Effects Analysis (FMEA. The systematic and integrated analysis of back-end data is suggested as an upstream effort of RDM to increase understanding of noise factors during product usage based on the feedback of claims data to FMEA and to address continuous improvement in product development.

Computer codes for particle accelerator design and analysis: A compendium. Second edition

International Nuclear Information System (INIS)

Deaven, H.S.; Chan, K.C.D.

1990-05-01

The design of the next generation of high-energy accelerators will probably be done as an international collaborative efforts and it would make sense to establish, either formally or informally, an international center for accelerator codes with branches for maintenance, distribution, and consultation at strategically located accelerator centers around the world. This arrangement could have at least three beneficial effects. It would cut down duplication of effort, provide long-term support for the best codes, and provide a stimulating atmosphere for the evolution of new codes. It does not take much foresight to see that the natural evolution of accelerator design codes is toward the development of so-called Expert Systems, systems capable of taking design specifications of future accelerators and producing specifications for optimized magnetic transport and acceleration components, making a layout, and giving a fairly impartial cost estimate. Such an expert program would use present-day programs such as TRANSPORT, POISSON, and SUPERFISH as tools in the optimization process. Such a program would also serve to codify the experience of two generations of accelerator designers before it is lost as these designers reach retirement age. This document describes 203 codes that originate from 10 countries and are currently in use. The authors feel that this compendium will contribute to the dialogue supporting the international collaborative effort that is taking place in the field of accelerator physics today

Development of Mix Design Method in Efforts to Increase Concrete Performance Using Portland Pozzolana Cement (PPC)

Science.gov (United States)

Krisnamurti; Soehardjono, A.; Zacoeb, A.; Wibowo, A.

2018-01-01

Earthquake disaster can cause infrastructure damage. Prevention of human casualties from disasters should do. Prevention efforts can do through improving the mechanical performance of building materials. To achieve high-performance concrete (HPC), usually used Ordinary Portland Cement (OPC). However, the most widely circulating cement types today are Portland Pozzolana Cement (PPC) or Portland Composite Cement (PCC). Therefore, the proportion of materials used in the HPC mix design needs to adjust to achieve the expected performance. This study aims to develop a concrete mix design method using PPC to fulfil the criteria of HPC. The study refers to the code/regulation of concrete mixtures that use OPC based on the results of laboratory testing. This research uses PPC material, gravel from Malang area, Lumajang sand, water, silica fume and superplasticizer of a polycarboxylate copolymer. The analyzed information includes the investigation results of aggregate properties, concrete mixed composition, water-binder ratio variation, specimen dimension, compressive strength and elasticity modulus of the specimen. The test results show that the concrete compressive strength achieves value between 25 MPa to 55 MPa. The mix design method that has developed can simplify the process of concrete mix design using PPC to achieve the certain desired performance of concrete.

Designing and Programming CICS Applications

CERN Document Server

Horswill, John

2011-01-01

CICS is an application server that delivers industrial-strength, online transaction management for critical enterprise applications. Proven in the market for over 30 years with many of the world's leading businesses, CICS enables today's customers to modernize and extend their applications to take advantage of the opportunities provided by e-business while maximizing the benefits of their existing investments. Designing and Programming CICS Applications will benefit a diverse audience. It introduces new users of IBM's mainframe (OS/390) to CICS features. It shows experienced users how t

The terrestrial ecosystem program for the Yucca Mountain Project

International Nuclear Information System (INIS)

Ostler, W.K.; O'Farrell, T.P.

1994-01-01

DOE has implemented a program to monitor and mitigate impacts associated with site Characterization Activities at Yucca Mountain on the environment. This program has a sound experimental and statistical base. Monitoring data has been collected for parts of the program since 1989. There have been numerous changes in the Terrestrial Ecosystems Program since 1989 that reflect changes in the design and locations of Site Characterization Activities. There have also been changes made in the mitigation techniques implemented to protect important environmental resources based on results from the research efforts at Yucca Mountain. These changes have strengthened DOE efforts to ensure protection of the environmental during Site Characterization. DOE,has developed and implemented an integrated environmental program that protects the biotic environment and will restore environmental quality at Yucca Mountain

Mediation designs for tobacco prevention research

Science.gov (United States)

MacKinnon, David P.; Taborga, Marcia P.; Morgan-Lopez, Antonio A.

2010-01-01

This paper describes research designs and statistical analyses to investigate how tobacco prevention programs achieve their effects on tobacco use. A theoretical approach to program development and evaluation useful for any prevention program guides the analysis. The theoretical approach focuses on action theory for how the program affects mediating variables and on conceptual theory for how mediating variables are related to tobacco use. Information on the mediating mechanisms by which tobacco prevention programs achieve effects is useful for the development of efficient programs and provides a test of the theoretical basis of prevention efforts. Examples of these potential mediating mechanisms are described including mediated effects through attitudes, social norms, beliefs about positive consequences, and accessibility to tobacco. Prior research provides evidence that changes in social norms are a critical mediating mechanism for successful tobacco prevention. Analysis of mediating variables in single group designs with multiple mediators are described as well as multiple group randomized designs which are the most likely to accurately uncover important mediating mechanisms. More complicated dismantling and constructive designs are described and illustrated based on current findings from tobacco research. Mediation analysis for categorical outcomes and more complicated statistical methods are outlined. PMID:12324176

Radiation protection/shield design: a need for a systems approach

International Nuclear Information System (INIS)

Disney, R.K.

1977-01-01

Radiation protection/shielding design of a nuclear facility requires a coordinated effort of many engineering disciplines to meet the requirements imposed by regulations. The system approach to Clinch River Breeder Reactor Plant (CRBRP) radiation protection is described, and the program developed to implement this approach is defined. In addition, the principal shielding design problems for LMFBR nuclear reactor systems are discussed in relation to LWR nuclear reactor system shielding designs. The methodology used to analyze these problems in the U.S. LMFBR program, the resultant design solutions, and the experimental verification of these designs and/or methods are discussed

Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

The design of measurement programs devoted to parameter identification of structural dynamic systems is considered. The design problem is formulated as an optimization problem to minimize the total expected cost that is the cost of failure and the cost of the measurement program. All...... the calculations are based on a priori knowledge and engineering judgement. One of the contribution of the approach is that the optimal number of sensors can be estimated. This is shown in a numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement program...

Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

The design of a measured program devoted to parameter identification of structural dynamic systems is considered, the design problem is formulated as an optimization problem due to minimize the total expected cost of the measurement program. All the calculations are based on a priori knowledge...... and engineering judgement. One of the contribution of the approach is that the optimal nmber of sensors can be estimated. This is sown in an numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement program for estimating the modal damping parameters...

Design Program in Graphic User Interface Environment for Automobile ER Devices

Science.gov (United States)

Lim, S. C.; Park, J. S.; Sohn, J. W.; Choi, S. B.

This work presents a design and analysis program for vehicle devices utilizing an electrorheological (ER) fluid. The program is operated in graphic user interface (GUI) environment and the initial window is consisted of four subprogram modules which are related to ER shock absorber, ER seat damper, ER engine mount, and ER anti-lock brake system (ABS), respectively. In order to execute each module, both material properties and design parameters are to be chosen by the user. Then, the output display window shows the field-dependent performance characteristics to be considered as design criteria. In addition, control performances of the vehicle system equipped with ER devices are displayed in time and frequency domain. In order to demonstrate the effectiveness of the proposed program, ER shock absorber and ER ABS are designed and manufactured and their performance characteristics are evaluated.

Program Design Report of the CNC Machine Tool(II)

International Nuclear Information System (INIS)

Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

2007-06-01

The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

Program Design Report of the CNC Machine Tool(II)

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H

2007-06-15

The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology.

Program Design Report of the CNC Machine Tool(III)

International Nuclear Information System (INIS)

Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

2008-08-01

The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

Program Design Report of the CNC Machine Tool (I)

International Nuclear Information System (INIS)

Kim, Jong Kiun; Youm, K. U.; Kim, K. S.

2006-08-01

The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

Program Design Report of the CNC Machine Tool(IV)

International Nuclear Information System (INIS)

Youm, Ki Un; Lee, I. B.; Youm, J. H.

2009-09-01

The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

Design of training programs for a positive youth development program: Project P.A.T.H.S. in Hong Kong.

Science.gov (United States)

Shek, Daniel T L; Chak, Yammy L Y

2010-01-01

To facilitate the implementation of the Secondary 1 to Secondary 3 program of the Project P.A.T.H.S. in Hong Kong, systematic training programs are designed for the potential program implementers. The rationales, objectives and design of the Secondary 1 to Secondary 3 training programs are outlined in this paper. The training programs cover theories of adolescent development, positive youth development, background and curricula of the Project P.A.T.H.S., factors affecting program implementation quality and evaluation of the project. Besides introducing the curriculum units, the training programs also focus on nature of learning and related theories (particularly experiential learning), teaching methods and instructional techniques, motivating students, and classroom management.

Large coil program support structure conceptual design

International Nuclear Information System (INIS)

Litherland, P.S.

1977-01-01

The purpose of the Large Coil Program (LCP) is to perform tests on both pool boiling and force cooled superconducting toroidal field coils. The tests will attempt to approximate conditions anticipated in an ignition tokamak. The test requirements resulted in a coil support design which accommodates up to six (6) test coils and is mounted to a structure capable of resisting coil interactions. The steps leading to the present LCP coil support structure design, details on selected structural components, and the basic assembly sequence are discussed

Negotiating and Designing Public Space. Experiences with a new M.Sc. in Urban Design Program in Hong Kong

Directory of Open Access Journals (Sweden)

Hendrik Tieben

2013-05-01

Full Text Available This contribution reflects on first experiences made with a newly launched Master of Science in Urban Design program at the Chinese University of Hong Kong. As an important part of this program, students have to develop their design proposal in response to feedback of different stakeholders and community members. Thus the program responds to the growing aspiration of Hong Kong’s citizens to shape the urban development of their city and a lack of a meaningful participation process in the region. With its high density, protected country parks, efficient public transport and large scale housing program, generally, Hong Kong offers important lessons for contemporary urbanism. However, since the end of the British colonial rule and in face of increasing property prices, pollution and the disappearance of local heritage, intensive debates started about the regions future. Another central point of the recent discussion in Hong Kong – and key theme of the new urban design program - is the demand for the rights and qualities of public space. The paper presents the set-up of the design studio, which was closely linked to a course on “urban processes”. During the semester, students had to organize community forums and street exhibitions in a specific district, invite stakeholders and residents and discuss with them their ideas. Their projects, then, had to respond on the various feedbacks and integrate them in their design and policy proposals. The text reflects on the student projects and the lessons learned in the process. It addresses general questions such as the challenges in communicating with a diverse community (e.g. language barriers and culturally different ideas of public space. It addresses the question of the intended and unintended effects of a participatory design studio in the community, and possible follow-ups. And it reflects on the general role of design and designers in shaping community spaces.

Environmental Management Science Program Workshop. Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

1998-07-01

The Department of Energy Office of Environmental Management (EM), in partnership with the Office of Energy Research (ER), designed, developed, and implemented the Environmental Management Science Program as a basic research effort to fund the scientific and engineering understanding required to solve the most challenging technical problems facing the government's largest, most complex environmental cleanup program. The intent of the Environmental Management Science Program is to: (1) Provide scientific knowledge that will revolutionize technologies and cleanup approaches to significantly reduce future costs, schedules, and risks. (2) Bridge the gap between broad fundamental research that has wide-ranging applications such as that performed in the Department's Office of Energy Research and needs-driven applied technology development that is conducted in Environmental Management's Office of Science and Technology. (3) Focus the nation's science infrastructure on critical Department of Energy environmental problems. In an effort to share information regarding basic research efforts being funded by the Environmental Management Science Program and the Environmental Management/Energy Research Pilot Collaborative Research Program (Wolf-Broido Program), this CD includes summaries for each project. These project summaries, available in portable document format (PDF), were prepared in the spring of 1998 by the principal investigators and provide information about their most recent project activities and accomplishments.

Repository-Based Software Engineering Program: Working Program Management Plan

Science.gov (United States)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Supporting Students as Scientists: One Mission's Efforts

Science.gov (United States)

Taylor, J.; Chambers, L. H.; Trepte, C. R.

2012-12-01

NASA's CALIPSO satellite mission provides an array of opportunities for teachers, students, and the general public. In developing our latest plan for education and public outreach, CALIPSO focused on efforts that would support students as scientists. CALIPSO EPO activities are aimed at inspiring young scientists through multiple avenues of potential contact, including: educator professional development, student-scientist mentoring, curriculum resource development, and public outreach through collaborative mission efforts. In this session, we will explore how these avenues complement one another and take a closer look at the development of the educator professional development activities. As part of CALIPSO's EPO efforts, we have developed the GLOBE Atmosphere Investigations Programs (AIP). The program encourages students to engage in authentic science through research on the atmosphere. The National Research Council (NRC) has emphasized the importance of teaching scientific inquiry in the National Science Education Standards (1996, 2000) and scientific practice in the recent Framework for K-12 Science Education (2011). In order to encourage student-centered science inquiry, teacher training utilizing GLOBE Atmosphere Investigations and GLOBE's Student Research Process are provided to middle and high school teachers to assist them in incorporating real scientific investigations into their classroom. Through participation in the program, teachers become a part of GLOBE (Global Learning and Observations to Benefit the Environment) - an international community of teachers, students, and scientists studying environmental science in over 24,000 schools around the world. The program uses NASA's satellites and the collection of atmosphere data by students to provide an engaging science learning experience for the students, and teachers. The GLOBE Atmosphere Investigations program offers year-long support to both teachers and students through direct involvement with NASA

Development of a Decommissioning Certificate Program

International Nuclear Information System (INIS)

Morton, M. R.

1999-01-01

A Decommissioning Certificate Program has been developed at Washington State University Tri-Cities (WSU TC) in conjunction with Bechtel Hanford, Inc. (BHI), and the U.S. Department of Energy (DOE)to address the increasing need for qualified professionals to direct and manage decommissioning projects. The cooperative effort between academia, industry, and government in the development and delivery of this Program of education and training is described, as well as the Program's design to prepare students to contribute sooner, and at a higher level, to decommissioning projects

Design control and scientific investigations: Is there any linkage?

International Nuclear Information System (INIS)

Richards, R.R.

1995-01-01

The quality assurance requirements that apply to the effort to achieve safe transportation, storage, and disposal of high-level nuclear waste specify that ''design control'' be applied to design activities. That effort also involves extensive scientific investigation activities to, among other things, develop information that may be used in engineering design activities. Individuals who are charged with the implementation of such quality assurance requirements have come to a variety of conclusions about whether there is any firm linkage between design control and the conduct of scientific investigations. This paper contends that there is a reasonable and necessary linkage between ''design control'' and scientific activities, though not a connection that has traditionally been made and not one addressed in the QA standards for radioactive waste management programs

A Competence-Based Curriculum Design for Entrepreneurship Study Program

Directory of Open Access Journals (Sweden)

Priska J.R. Siagian

2011-08-01

Full Text Available Indonesia is affected by global crisis. Increasing the number of entrepreneurs is one of many solutions to increase the economic growth in Indonesia. The number of entrepreneurs in Indonesia to leverage the economic growth is still limited. Entrepreneurs can be prepared through an Entrepreneurship Study Program. Entrepreneurship Study Program attempts to create qualified entrepreneurs who have relevant competences. In order to create a qualified entrepreneurs, the Entrepreneurial Studies Program requires a competency-based curriculum that will support the educational process and provide all the necessary to become future entrepreneurs who can survive through a global challenge. This research aims to design a competence-based curriculum for entrepreneurial study and uses Quality Function Deployment (QFD as the major tool to design the competence-based curriculum. From the QFD process, this research finds core and elective courses for the Entrepreneurship Study Program. The result shows the competences covered by the courses and sequence, credits, and teaching methods for each course. The competences prepared the potential entrepreneurs can be achieved through specific courses which can be acquired within 8 semesters.

MPprimer: a program for reliable multiplex PCR primer design

Directory of Open Access Journals (Sweden)

Wang Xiaolei

2010-03-01

Full Text Available Abstract Background Multiplex PCR, defined as the simultaneous amplification of multiple regions of a DNA template or multiple DNA templates using more than one primer set (comprising a forward primer and a reverse primer in one tube, has been widely used in diagnostic applications of clinical and environmental microbiology studies. However, primer design for multiplex PCR is still a challenging problem and several factors need to be considered. These problems include mis-priming due to nonspecific binding to non-target DNA templates, primer dimerization, and the inability to separate and purify DNA amplicons with similar electrophoretic mobility. Results A program named MPprimer was developed to help users for reliable multiplex PCR primer design. It employs the widely used primer design program Primer3 and the primer specificity evaluation program MFEprimer to design and evaluate the candidate primers based on genomic or transcript DNA database, followed by careful examination to avoid primer dimerization. The graph-expanding algorithm derived from the greedy algorithm was used to determine the optimal primer set combinations (PSCs for multiplex PCR assay. In addition, MPprimer provides a virtual electrophotogram to help users choose the best PSC. The experimental validation from 2× to 5× plex PCR demonstrates the reliability of MPprimer. As another example, MPprimer is able to design the multiplex PCR primers for DMD (dystrophin gene which caused Duchenne Muscular Dystrophy, which has 79 exons, for 20×, 20×, 20×, 14×, and 5× plex PCR reactions in five tubes to detect underlying exon deletions. Conclusions MPprimer is a valuable tool for designing specific, non-dimerizing primer set combinations with constrained amplicons size for multiplex PCR assays.

NREL Quickens its Tech Transfer Efforts

Energy Technology Data Exchange (ETDEWEB)

Lammers, H.

2012-02-01

Innovations and 'aha' movements in renewable energy and energy efficiency, while exciting in the lab, only truly live up to their promise once they find a place in homes or business. Late last year President Obama issued a directive to all federal agencies to increase their efforts to transfer technologies to the private sector in order to achieve greater societal and economic impacts of federal research investments. The president's call to action includes efforts to establish technology transfer goals and to measure progress, to engage in efforts to increase the speed of technology transfer and to enhance local and regional innovation partnerships. But, even before the White House began its initiative to restructure the commercialization process, the National Renewable Energy Laboratory had a major effort underway designed to increase the speed and impact of technology transfer activities and had already made sure its innovations had a streamlined path to the private sector. For the last three years, NREL has been actively setting commercialization goals and tracking progress against those goals. For example, NREL sought to triple the number of innovations over a five-year period that began in 2009. Through best practices associated with inventor engagement, education and collaboration, NREL quadrupled the number of innovations in just three years. Similar progress has been made in patenting, licensing transactions, income generation and rewards to inventors. 'NREL is known nationally for our cutting-edge research and companies know to call us when they are ready to collaborate,' William Farris, vice president for commercialization and technology transfer, said. 'Once a team is ready to dive in, they don't want be mired in paperwork. We've worked to make our process for licensing NREL technology faster; it now takes less than 60 days for us to come to an agreement and start work with a company interested in our research

The Engineering Compliance Program development process and its role in design

International Nuclear Information System (INIS)

1997-12-01

This paper presents an overview of the Engineering Compliance Program (ECP) development process and its role in design. The ECP is a formal program to assess Nuclear Regulatory Commission (NRC) regulatory guidance in terms of precedence, industry experience documents, and codes and standards to determine their applicability to Mined Geologic Disposal System (MGDS) design. These determinations are documented in ECP Guidance Packages for MGDS Structures, Systems and Components (SSCs). This ensures that the license application appropriately reflects the MGDS design and facilitates NRC acceptance and compliance review

The Effort Paradox: Effort Is Both Costly and Valued.

Science.gov (United States)

Inzlicht, Michael; Shenhav, Amitai; Olivola, Christopher Y

2018-04-01

According to prominent models in cognitive psychology, neuroscience, and economics, effort (be it physical or mental) is costly: when given a choice, humans and non-human animals alike tend to avoid effort. Here, we suggest that the opposite is also true and review extensive evidence that effort can also add value. Not only can the same outcomes be more rewarding if we apply more (not less) effort, sometimes we select options precisely because they require effort. Given the increasing recognition of effort's role in motivation, cognitive control, and value-based decision-making, considering this neglected side of effort will not only improve formal computational models, but also provide clues about how to promote sustained mental effort across time. Copyright © 2018 Elsevier Ltd. All rights reserved.

Designing Cross-Cultural Orientation Programs for Business.

Science.gov (United States)

Ogden, John D.

A 1-day orientation workshop for business clients from other cultures is described. Factors in program design that relate to the specific cultural group addressed are discussed, and include such considerations as culture-specific versus culture-general content, professional focus, and the learning style to which the participants are accustomed.…

Development of design program for small-sized gas absorption chiller/heaters

Energy Technology Data Exchange (ETDEWEB)

Yoon, J.I.; Kwon, O.K.; Moon, C.K. [Pukyong National University, Pusan (Korea); Yang, Y.M.; Kim, H.Y. [R and D Center, Korea Gas Corporation, Ansan (Korea)

1999-10-01

Analysis of basic data is performed for development of small size water-cooled household absorption chiller/heater using non CFC refrigerant, analytic simulation program of air cooling performance is developed that system has 1.5-10RT of air cooling performance, we perform cycle analysis and numerical simulation. We develope a performance analysis of simulation program to perform a basic design for 1.5-10RT apparatus of small size system of development model in gas driven double effect absorption chiller/heater. The system working condition and operation limit condition is decided from the existing data which is analyzed and the conference with KOGAS. After the basic input variable and regular condition is established for heat cycle analysis, the simulation algorithm is set up and performance simulation program is coded according to the organized algorithm. The basic design of optimum system is completed from parametric study using developed simulation program and establishing the design variable range of developing object model. 20 refs., 30 figs., 9 tabs.

Shader programming for computational arts and design: A comparison between creative coding frameworks

OpenAIRE

Gomez, Andres Felipe; Colubri, Andres; Charalambos, Jean Pierre

2016-01-01

We describe an Application Program Interface (API) that facilitates the use of GLSL shaders in computational design, interactive arts, and data visualization. This API was first introduced in the version 2.0 of Processing, a programming language and environment widely used for teaching and production in the context of media arts and design, and has been recently completed in the 3.0 release. It aims to incorporate low-level shading programming into code-based design, by int...

US effort on HTS power transformers

Energy Technology Data Exchange (ETDEWEB)

Mehta, S., E-mail: shirish.pmehta@spx.com [Waukesha Electric Systems, 400 S. Praire Avenue, Waukesha, WI 53186 (United States)

2011-11-15

Fault Current Limiting HTS Transformer development program plan is presented. Benefits of FCL HTS Transformers for power delivery system. Independent program review process is described. Transformer specifications, site requirement described. Waukesha Electric Systems has been working in HTS power transformers development program under the auspices of US Government Department of Energy since 1994. This presentation will describe various milestones for this program and program history along with the lessons learned along the way. Our motivations for working on this development program based on man benefits offered by HTS power transformers to power delivery systems will be discussed. Based on various issues encountered during execution of many HTS projects, DOE has set up an independent program review process that is lead by team of experts. This team reviews are integral part of all DOE HTS projects. Success of all projects would be greatly enhanced by identifying critical issues early in the program. Requiring appropriate actions to mitigate the issues before processing further will lead to proactive interrogation and incorporation of expert's ideas in the project plans. Working of this review process will be also described in this presentation. Waukesha Electric Systems team including: Superpower-Inc, Oak Ridge National Laboratory, University of Houston Center for Superconductivity and Southern California Edison company was awarded a cost share grant by US Government in 2010 for development of a fault current limiting HTS power transformer. This multi year's program will require design, manufacture, installation, and monitoring of a 28 MVA tree phase transformer installed at Irvine CA. Smart Grid demonstration site. Transformer specifications along with requirements for fault current limiting and site requirement will be discussed. Design and development of various sub systems in support of this program including: HTS conductor performance specification

US effort on HTS power transformers

International Nuclear Information System (INIS)

Mehta, S.

2011-01-01

Fault Current Limiting HTS Transformer development program plan is presented. Benefits of FCL HTS Transformers for power delivery system. Independent program review process is described. Transformer specifications, site requirement described. Waukesha Electric Systems has been working in HTS power transformers development program under the auspices of US Government Department of Energy since 1994. This presentation will describe various milestones for this program and program history along with the lessons learned along the way. Our motivations for working on this development program based on man benefits offered by HTS power transformers to power delivery systems will be discussed. Based on various issues encountered during execution of many HTS projects, DOE has set up an independent program review process that is lead by team of experts. This team reviews are integral part of all DOE HTS projects. Success of all projects would be greatly enhanced by identifying critical issues early in the program. Requiring appropriate actions to mitigate the issues before processing further will lead to proactive interrogation and incorporation of expert's ideas in the project plans. Working of this review process will be also described in this presentation. Waukesha Electric Systems team including: Superpower-Inc, Oak Ridge National Laboratory, University of Houston Center for Superconductivity and Southern California Edison company was awarded a cost share grant by US Government in 2010 for development of a fault current limiting HTS power transformer. This multi year's program will require design, manufacture, installation, and monitoring of a 28 MVA tree phase transformer installed at Irvine CA. Smart Grid demonstration site. Transformer specifications along with requirements for fault current limiting and site requirement will be discussed. Design and development of various sub systems in support of this program including: HTS conductor performance specification

Program design of data acquisition in Windows

International Nuclear Information System (INIS)

Cai Jianxin; Yan Huawen

2004-01-01

Several methods for the design of data acquisition program based on Microsoft Windows are introduced. Then their respective advantages and disadvantages are totally analyzed. At the same time, the data acquisition modes applicable to each method are also pointed out. It is convenient for data acquisition programmers to develop data acquisition systems. (authors)

Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies report. Volume 3: Computer program listings

Science.gov (United States)

1979-01-01

A description and listing is presented of two computer programs: Hybrid Vehicle Design Program (HYVELD) and Hybrid Vehicle Simulation Program (HYVEC). Both of the programs are modifications and extensions of similar programs developed as part of the Electric and Hybrid Vehicle System Research and Development Project.

When is a species declining? Optimizing survey effort to detect population changes in reptiles.

Directory of Open Access Journals (Sweden)

David Sewell

Full Text Available Biodiversity monitoring programs need to be designed so that population changes can be detected reliably. This can be problematical for species that are cryptic and have imperfect detection. We used occupancy modeling and power analysis to optimize the survey design for reptile monitoring programs in the UK. Surveys were carried out six times a year in 2009-2010 at multiple sites. Four out of the six species--grass snake, adder, common lizard, slow-worm -were encountered during every survey from March-September. The exceptions were the two rarest species--sand lizard and smooth snake--which were not encountered in July 2009 and March 2010 respectively. The most frequently encountered and most easily detected species was the slow-worm. For the four widespread reptile species in the UK, three to four survey visits that used a combination of directed transect walks and artificial cover objects resulted in 95% certainty that a species would be detected if present. Using artificial cover objects was an effective detection method for most species, considerably increased the detection rate of some, and reduced misidentifications. To achieve an 85% power to detect a decline in any of the four widespread species when the true decline is 15%, three surveys at a total of 886 sampling sites, or four surveys at a total of 688 sites would be required. The sampling effort needed reduces to 212 sites surveyed three times, or 167 sites surveyed four times, if the target is to detect a true decline of 30% with the same power. The results obtained can be used to refine reptile survey protocols in the UK and elsewhere. On a wider scale, the occupancy study design approach can be used to optimize survey effort and help set targets for conservation outcomes for regional or national biodiversity assessments.

progress on the U.S.-Russian excess weapons plutonium disposition program. Panel discussion

International Nuclear Information System (INIS)

Feinroth, Herb; Sicard, Bruno; Kudryavtsev, Evgeny; Sprankle, Kenneth A.; Nesbit, Steve; Gadsby, Robert; Aratani, Kiyonori

2001-01-01

Full text of publication follows: On September 1, 2000, the United States and Russia signed a historic agreement to each dispose of 34 tons of excess weapons plutonium by 2025, or sooner if possible. The agreement was conditional on international financing of the Russian program. The parties are now attempting to establish a specific program for disposition of the Russian plutonium and to secure commitments for international financing of the Russian program. In the United States, efforts are moving forward to design, license, and construct the necessary facilities for its disposition program. With the assistance of France and Germany, efforts are moving forward in Russia to plan and design appropriate reactor modifications as well as the needed facilities for plutonium conversion and mixed-oxide fabrication. Japan and Canada are also participants in the Russian disposition program. This panel session will review the status of actions taken to bring this agreement to fruition. (authors)

Canadian fusion program

International Nuclear Information System (INIS)

Brown, T.S.

1982-06-01

The National Research Council of Canada is establishing a coordinated national program of fusion research and development that is planned to grow to a total annual operating level of about $20 million in 1985. The long-term objective of the program is to put Canadian industry in a position to manufacture sub-systems and components of fusion power reactors. In the near term the program is designed to establish a minimum base of scientific and technical expertise sufficient to make recognized contributions and thereby gain access to the international effort. The Canadian program must be narrowly focussed on a few specializations where Canada has special indigenous skills or technologies. The programs being funded are the Tokamak de Varennes, the Fusion Fuels Technology Project centered on tritium management, and high-power gas laser technology and associated diagnostic instrumentation

IPAD applications to the design, analysis, and/or machining of aerospace structures. [Integrated Program for Aerospace-vehicle Design

Science.gov (United States)

Blackburn, C. L.; Dovi, A. R.; Kurtze, W. L.; Storaasli, O. O.

1981-01-01

A computer software system for the processing and integration of engineering data and programs, called IPAD (Integrated Programs for Aerospace-Vehicle Design), is described. The ability of the system to relieve the engineer of the mundane task of input data preparation is demonstrated by the application of a prototype system to the design, analysis, and/or machining of three simple structures. Future work to further enhance the system's automated data handling and ability to handle larger and more varied design problems are also presented.

Object-oriented design and programming in medical decision support.

Science.gov (United States)

Heathfield, H; Armstrong, J; Kirkham, N

1991-12-01

The concept of object-oriented design and programming has recently received a great deal of attention from the software engineering community. This paper highlights the realisable benefits of using the object-oriented approach in the design and development of clinical decision support systems. These systems seek to build a computational model of some problem domain and therefore tend to be exploratory in nature. Conventional procedural design techniques do not support either the process of model building or rapid prototyping. The central concepts of the object-oriented paradigm are introduced, namely encapsulation, inheritance and polymorphism, and their use illustrated in a case study, taken from the domain of breast histopathology. In particular, the dual roles of inheritance in object-oriented programming are examined, i.e., inheritance as a conceptual modelling tool and inheritance as a code reuse mechanism. It is argued that the use of the former is not entirely intuitive and may be difficult to incorporate into the design process. However, inheritance as a means of optimising code reuse offers substantial technical benefits.

Lesson learned from PSA in the design improvement program of KSNP+

International Nuclear Information System (INIS)

Kim, M.R.; Lim, H.K.; Kang, S.K.; Park, K.S.

2001-01-01

KOPEC (Korea Power Engineering Co.) in conjunction with the client KEPCO (Korea Electric Power Corp.) has been developing a highly competitive Improved Korean Standard Nuclear Power Plant named KSNP+. From the beginning of Design Improvement Program, PSA was carried out to assure that the safety level of KSNP+ is maintained or improved in comparison with that of KSNP, the Korean Standard NPP. To achieve the safety goal of KSNP+, PSA team reviewed all design changes that might affect the plant safety. Design vulnerabilities were identified from the PSA results and safety improvement items were recommended to the system designers. Through the Design Improvement Program, KSNP+ became more reliable, safer and economically competitive than KSNP. This was achieved by systematic approach for design optimization and effective use of PSA technology based on past experience and expertise of nuclear power plant. (author)

Effects of program design on the professional socialization of RN-BSN students.

Science.gov (United States)

Eckhardt, Jo Anne

2002-01-01

The purpose of this study was to examine effects of program design on the bureaucratic and professional role conceptions of registered nurses in baccalaureate nursing programs. Attention to how programs are set up and function has relevance for theory and practice and enables improving frameworks for program planning. The study design embodied qualitative and quantitative elements and used six processes of socialization in organizations as a conceptual guide. Qualitative data collection concerned comparative case studies of three baccalaureate nursing programs and data analysis included narratives detailing program organization and describing student experience. Quantitative matter involved mailed questionnaires to determine graduates' bureaucratic, professional, and service role conceptions. Data analysis (analysis of variance) revealed statistically significant differences in role conceptions (F[3.56] = 4.51) of registered nurses graduating from different baccalaureate programs in nursing. Indications are that nursing programs can be set up to produce equal education and reach certain stated outcomes, yet implicit program processes can impact student learning. Copyright 2002, Elsevier Science (USA). All rights reserved.

Preliminary Design Analysis of a HGD for the NHDD Program at Korea

International Nuclear Information System (INIS)

Song, Kee Nam; Lee, H. Y.; Lee, S. B.; Kim, Y. W.

2007-01-01

Korea Atomic Energy Research Institute is in the process of carrying out a Nuclear Hydrogen Development and Demonstration (NHDD) Program by considering the indirect cycle gas cooled reactors that produce heat at temperatures in the order of 950 .deg. C. A coaxial double-tube Hot Gas Duct (HGD) is a key component connecting the reactor pressure vessel and the intermediate heat exchanger for the NHDD program. Recently, a preliminary design evaluation for the hot gas duct of the NHDD program was carried out. These preliminary design activities include a decision on the geometric dimensions, a strength evaluation, an appropriate material selection, and identifying the design code for the HGD. In this study, a preliminary strength evaluation for the HGD of the NHDD program has been undertaken based on the HTR-10 design concepts. Also, a preliminary evaluation of the creep-fatigue damage for a high temperature HGD structure has been carried out according to the draft code case for Alloy 617. Preliminary strength evaluation results for the HGD showed that the geometric dimensions of the proposed HGD would be acceptable for the design requirements

Program plan for the Brayton Isotope Power System. Phase I. Design, fabrication and test of the Brayton Isotope Power System

International Nuclear Information System (INIS)

1975-01-01

Phase I of an overall program for the development of a 500 to 2000 W(e) (EOM), 7-y life, power system for space vehicles is discussed. The system uses a closed Brayton dynamic system to convert energy from an isotope heat source at a net efficiency greater than 25 percent. This first phase, a 35-month effort, is for the conceptual design of a 1300 W(e), 450 lb flight system and the design, fabrication, and test of a ground demonstration system. The flight system will use, for the baseline design, two of the multihundred-watt (MHW) heat sources being developed. The Ground Demonstration System will simulate, as closely as possible, the Brayton Isotope Power Flight System and will utilize components and technology being developed for the Mini-Brayton rotating unit, recuperator and heat source assembly, respectively. The Ground Demonstration System includes a performance test and a 1000-h endurance test

Effort and trust: the underpinnings of active learning.

Science.gov (United States)

Adams, Seana; Bilimoria, Krish; Malhotra, Neha; Rangachari, P K

2017-09-01

Three undergraduate students and their teacher discuss two crucial issues that form the implicit basis of active learning: effort and trust. They use a single course in a Health Sciences Program to anchor their comments. Copyright © 2017 the American Physiological Society.

Processing a programming handbook for visual designers and artists

CERN Document Server

Reas, Casey

2014-01-01

The visual arts are rapidly changing as media moves into the web, mobile devices, and architecture. When designers and artists learn the basics of writing software, they develop a new form of literacy that enables them to create new media for the present, and to imagine future media that are beyond the capacities of current software tools. This book introduces this new literacy by teaching computer programming within the context of the visual arts. It offers a comprehensive reference and text for Processing (www.processing.org), an open-source programming language that can be used by students, artists, designers, architects, researchers, and anyone who wants to program images, animation, and interactivity. Written by Processing's cofounders, the book offers a definitive reference for students and professionals. Tutorial chapters make up the bulk of the book; advanced professional projects from such domains as animation, performance, and installation are discussed in interviews with their creators. This secon...

Enhancing school-based asthma education efforts using computer-based education for children.

Science.gov (United States)

Nabors, Laura A; Kockritz, Jennifer L; Ludke, Robert L; Bernstein, Jonathan A

2012-03-01

Schools are an important site for delivery of asthma education programs. Computer-based educational programs are a critical component of asthma education programs and may be a particularly important education method in busy school environments. The objective of this brief report is to review and critique computer-based education efforts in schools. The results of our literature review indicated that school-based computer education efforts are related to improved knowledge about asthma and its management. In some studies, improvements in clinical outcomes also occur. Data collection programs need to be built into games that improve knowledge. Many projects do not appear to last for periods greater than 1 year and little information is available about cultural relevance of these programs. Educational games and other programs are effective methods of delivering knowledge about asthma management and control. Research about the long-term effects of this increased knowledge, in regard to behavior change, is needed. Additionally, developing sustainable projects, which are culturally relevant, is a goal for future research.

Situated Research Design and Methodological Choices in Formative Program Evaluation

Science.gov (United States)

Supovitz, Jonathan

2013-01-01

Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

Quiet engine program flight engine design study

Science.gov (United States)

Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

1974-01-01

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

The Effects of the Peer Tutoring Program: An Action Research Study of the Effectiveness of the Peer Tutoring Program at One Suburban Middle School

Science.gov (United States)

Grubbs, Natalie

2009-01-01

The results of a study that examined the peer tutoring program at a middle school are discussed in this article. In an effort to determine ways to improve the peer tutoring program an action research (AR) mixed design study was developed. AR is practitioner based research. Its purpose is to examine the work of practitioners for effectiveness and…

Operation and maintenance requirements of system design bases

International Nuclear Information System (INIS)

Banerjee, A.K.; Hanley, N.E.

1989-01-01

All system designs make assumptions about system operation testing, inspection, and maintenance. Existing industry codes and standards explicitly address design requirements of new systems, while issues related to system and plant reliability, life, design margins, effects of service conditions, operation, maintenance, etc., usually are implicit. However, system/component design documents of existing power plants often address the code requirements without considering the operation, maintenance, inspection, and testing (OMIT) requirements. The nuclear industry is expending major efforts at most nuclear power plants to reassemble and/or reconstitute system design bases. Stone ampersand Webster Engineering Corporation (SWEC) recently addressed the OMIT requirements of system/component design as an integral part of a utility's preventive maintenance program. For each component, SWEC reviewed vendor recommendations, NPRDS data/industry experience, the existing maintenance program, component service conditions, and actual plant experience. A maintenance program that considers component service conditions and plant experience ensures a connection between maintenance and design basis. Root cause analysis of failure and engineering evaluation of service condition are part of the program. System/component OMIT requirements also are compared against system design, service condition, degradation mechanism, etc., through system/component life-cycle evaluation

A peer-to-peer traffic safety campaign program.

Science.gov (United States)

2014-06-01

The purpose of this project was to implement a peer-to-peer drivers safety program designed for high school students. : This project builds upon an effective peer-to-peer outreach effort in Texas entitled Teens in the Driver Seat (TDS), the : nati...

Status Report on Efforts to Enhance Instrumentation to Support Advanced Test Reactor Irradiations

Energy Technology Data Exchange (ETDEWEB)

J. Rempe; D. Knudson; J. Daw; T. Unruh; B. Chase; R. Schley; J. Palmer; K. Condie

2014-01-01

The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support the growth of nuclear science and technology in the United States (US). By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort at the Idaho National Laboratory (INL) is to design, develop, and deploy new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors was completed. Based on this initial review, recommendations were made with respect to what instrumentation is needed at the ATR, and a strategy was developed for obtaining these sensors. In 2009, a report was issued documenting this program’s strategy and initial progress toward accomplishing program objectives. Since 2009, annual reports have been issued to provide updates on the program strategy and the progress made on implementing the strategy. This report provides an update reflecting progress as of January 2014.

Development of a Decommissioning Certificate Program; TOPICAL

International Nuclear Information System (INIS)

M. R. Morton

1999-01-01

A Decommissioning Certificate Program has been developed at Washington State University Tri-Cities (WSU TC) in conjunction with Bechtel Hanford, Inc. (BHI), and the U.S. Department of Energy (DOE)to address the increasing need for qualified professionals to direct and manage decommissioning projects. The cooperative effort between academia, industry, and government in the development and delivery of this Program of education and training is described, as well as the Program's design to prepare students to contribute sooner, and at a higher level, to decommissioning projects

Modular, object-oriented redesign of a large-scale Monte Carlo neutron transport program

International Nuclear Information System (INIS)

Moskowitz, B.S.

2000-01-01

This paper describes the modular, object-oriented redesign of a large-scale Monte Carlo neutron transport program. This effort represents a complete 'white sheet of paper' rewrite of the code. In this paper, the motivation driving this project, the design objectives for the new version of the program, and the design choices and their consequences will be discussed. The design itself will also be described, including the important subsystems as well as the key classes within those subsystems

Modular Electric Vehicle Program (MEVP). Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The Modular Electric Vehicle Program (MEVP) was an EV propulsion system development program in which the technical effort was contracted by DOE to Ford Motor Company. The General Electric Company was a major subcontractor to Ford for the development of the electric subsystem. Sundstrand Power Systems was also a subcontractor to Ford, providing a modified gas turbine engine APU for emissions and performance testing as well as a preliminary design and producibility study for a Gas Turbine-APU for potential use in hybrid/electric vehicles. The four-year research and development effort was cost-shared between Ford, General Electric, Sundstrand Power Systems and DOE. The contract was awarded in response to Ford`s unsolicited proposal. The program objective was to bring electric vehicle propulsion system technology closer to commercialization by developing subsystem components which can be produced from a common design and accommodate a wide range of vehicles; i.e., modularize the components. This concept would enable industry to introduce electric vehicles into the marketplace sooner than would be accomplished via traditional designs in that the economies of mass production could be realized across a spectrum of product offerings. This would eliminate the need to dedicate the design and capital investment to a limited volume product offering which would increase consumer cost and/or lengthen the time required to realize a return on the investment.

Warehouse design and product assignment and allocation: A mathematical programming model

OpenAIRE

Geraldes, Carla A. S.; Carvalho, Maria Sameiro; Pereira, Guilherme

2012-01-01

Warehouses can be considered one of the most important nodes in supply chains. The dynamic nature of today's markets compels organizations to an incessant reassessment in an effort to respond to continuous challenges. Therefore warehouses must be continually re-evaluated to ensure that they are consistent with both market's demands and management's strategies. In this paper we discuss a mathematical programming model aiming to support product assignment and allocation to the functional areas ...

Workstations take over conceptual design

Science.gov (United States)

Kidwell, George H.

1987-01-01

Workstations provide sufficient computing memory and speed for early evaluations of aircraft design alternatives to identify those worthy of further study. It is recommended that the programming of such machines permit integrated calculations of the configuration and performance analysis of new concepts, along with the capability of changing up to 100 variables at a time and swiftly viewing the results. Computations can be augmented through links to mainframes and supercomputers. Programming, particularly debugging operations, are enhanced by the capability of working with one program line at a time and having available on-screen error indices. Workstation networks permit on-line communication among users and with persons and computers outside the facility. Application of the capabilities is illustrated through a description of NASA-Ames design efforts for an oblique wing for a jet performed on a MicroVAX network.

Status Report on Efforts to Enhance Instrumentation to Support Advanced Test Reactor Irradiations

International Nuclear Information System (INIS)

Rempe, J.L.; Knudson, D.L.; Daw, J.E.

2011-01-01

The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors was completed. Based on this review, recommendations were made with respect to what instrumentation is needed at the ATR; and a strategy was developed for obtaining these sensors. In 2009, a report was issued documenting this program's strategy and initial progress toward accomplishing program objectives. In 2009, a report was issued documenting this instrumentation development strategy and initial progress toward accomplishing instrumentation development program objectives. This document reports progress toward implementing this strategy in 2010.

LWST Phase I Project Conceptual Design Study: Evaluation of Design and Construction Approaches for Economical Hybrid Steel/Concrete Wind Turbine Towers; June 28, 2002 -- July 31, 2004

Energy Technology Data Exchange (ETDEWEB)

LaNier, M. W.

2005-01-01

The United States Department of Energy (DOE) Wind Energy Research Program has begun a new effort to partner with U.S. industry to develop wind technology that will allow wind systems to compete in regions of low wind speed. The Class 4 and 5 sites targeted by this effort have annual average wind speeds of 5.8 m/s (13 mph), measured at 10 m (33 ft) height. Such sites are abundant in the United States and would increase the land area available for wind energy production twenty-fold. The new program is targeting a levelized cost of energy of 3 cents/kWh at these sites by 2010. A three-element approach has been initiated. These efforts are concept design, component development, and system development. This work builds on previous activities under the WindPACT program and the Next Generation Turbine program. If successful, DOE estimates that his new technology could result in 35 to 45 gigawatts of additional wind capacity being installed by 2020.

ActionScript 30 Design Patterns Object Oriented Programming Techniques

CERN Document Server

Sanders, William

2008-01-01

If you're an experienced Flash or Flex developer ready to tackle sophisticated programming techniques with ActionScript 3.0, this hands-on introduction to design patterns takes you step by step through the process. You learn about various types of design patterns and construct small abstract examples before trying your hand at building full-fledged working applications outlined in the book.

Commercial Crew Development Program Overview

Science.gov (United States)

Russell, Richard W.

2011-01-01

NASA's Commercial Crew Development Program is designed to stimulate efforts within the private sector that will aid in the development and demonstration of safe, reliable, and cost-effective space transportation capabilities. With the goal of delivery cargo and eventually crew to Low Earth Orbit (LEO) and the International Space Station (ISS) the program is designed to foster the development of new spacecraft and launch vehicles in the commercial sector. Through Space Act Agreements (SAAs) in 2011 NASA provided $50M of funding to four partners; Blue Origin, The Boeing Company, Sierra Nevada Corporation, and SpaceX. Additional, NASA has signed two unfunded SAAs with ATK and United Space Alliance. This paper will give a brief summary of these SAAs. Additionally, a brief overview will be provided of the released version of the Commercial Crew Development Program plans and requirements documents.

Gas turbine designer computer program - a study of using a computer for preliminary design of gas turbines

Energy Technology Data Exchange (ETDEWEB)

Petersson, Rickard

1995-11-01

This thesis presents calculation schemes and theories for preliminary design of the fan, high pressure compressor and turbine of a gas turbine. The calculations are presented step by step, making it easier to implement in other applications. The calculation schemes have been implemented as a subroutine in a thermodynamic program. The combination of the thermodynamic cycle calculation and the design calculation turned out to give quite relevant results, when predicting the geometry and performance of an existing aero engine. The program developed is able to handle several different gas turbines, including those in which the flow is split (i.e. turbofan engines). The design process is limited to the fan, compressor and turbine of the gas turbine, the rest of the components have not been considered. Output from the program are main geometry, presented both numerically and as a scale plot, component efficiencies, stresses in critical points and a simple prediction of turbine blade temperatures. 11 refs, 21 figs, 1 tab

Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs

Energy Technology Data Exchange (ETDEWEB)

Yoder, G.L.

2005-10-03

This report documents the work performed during the first phase of the National Aeronautics and Space Administration (NASA), National Research Announcement (NRA) Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs. The document includes an optimization of both 100-kW{sub e} and 250-kW{sub e} (at the propulsion unit) Rankine cycle power conversion systems. In order to perform the mass optimization of these systems, several parametric evaluations of different design options were investigated. These options included feed and reheat, vapor superheat levels entering the turbine, three different material types, and multiple heat rejection system designs. The overall masses of these Nb-1%Zr systems are approximately 3100 kg and 6300 kg for the 100- kW{sub e} and 250-kW{sub e} systems, respectively, each with two totally redundant power conversion units, including the mass of the single reactor and shield. Initial conceptual designs for each of the components were developed in order to estimate component masses. In addition, an overall system concept was presented that was designed to fit within the launch envelope of a heavy lift vehicle. A technology development plan is presented in the report that describes the major efforts that are required to reach a technology readiness level of 6. A 10-year development plan was proposed.

ASIC design at Fermilab

International Nuclear Information System (INIS)

Yarema, R.

1991-06-01

In the past few years, ASIC (Application Specific Integrated Circuit) design has become important at Fermilab. The purpose of this paper is to present an overview of the in-house ASIC design activity which has taken place. This design effort has added much value to the high energy physics program and physics capability at Fermilab. The two approaches to ASIC development being pursued at Fermilab are examined by looking at some of the types of projects where ASICs are being used or contemplated. To help estimate the cost of future designs, a cost comparison is given to show the relative development and production expenses for these two ASIC approaches. 5 refs., 14 figs., 7 tabs

Patient Effort in Traumatic Brain Injury Inpatient Rehabilitation: Course and Associations With Age, Brain Injury Severity, and Time Postinjury

Science.gov (United States)

Seel, Ronald T.; Corrigan, John D.; Dijkers, Marcel P.; Barrett, Ryan S.; Bogner, Jennifer; Smout, Randall J.; Garmoe, William; Horn, Susan D.

2016-01-01

Objective To describe patients' level of effort in occupational, physical, and speech therapy sessions during traumatic brain injury (TBI) inpatient rehabilitation and to evaluate how age, injury severity, cognitive impairment, and time are associated with effort. Design Prospective, multicenter, longitudinal cohort study. Setting Acute TBI rehabilitation programs. Participants Patients (N=1946) receiving 138,555 therapy sessions. Interventions Not applicable. Main Outcome Measures Effort in rehabilitation sessions rated on the Rehabilitation Intensity of Therapy Scale, FIM, Comprehensive Severity Index brain injury severity score, posttraumatic amnesia (PTA), and Agitated Behavior Scale (ABS). Results The Rehabilitation Intensity of Therapy Scale effort ratings in individual therapy sessions closely conformed to a normative distribution for all 3 disciplines. Mean Rehabilitation Intensity of Therapy Scale ratings for patients' therapy sessions were higher in the discharge week than in the admission week (Prehabilitation, differences in effort ratings (Pcognitive scores and over time. In linear mixed-effects modeling, age and Comprehensive Severity Index brain injury severity score at admission, days from injury to rehabilitation admission, days from admission, and daily ratings of PTA and ABS score were predictors of level of effort (Prehabilitation setting using the Rehabilitation Intensity of Therapy Scale. Patients who sustain TBI show varying levels of effort in rehabilitation therapy sessions, with effort tending to increase over the stay. PTA and agitated behavior are primary risk factors that substantially reduce patient effort in therapies. PMID:26212400

Ares I-X Flight Test Validation of Control Design Tools in the Frequency-Domain

Science.gov (United States)

Johnson, Matthew; Hannan, Mike; Brandon, Jay; Derry, Stephen

2011-01-01

A major motivation of the Ares I-X flight test program was to Design for Data, in order to maximize the usefulness of the data recorded in support of Ares I modeling and validation of design and analysis tools. The Design for Data effort was intended to enable good post-flight characterizations of the flight control system, the vehicle structural dynamics, and also the aerodynamic characteristics of the vehicle. To extract the necessary data from the system during flight, a set of small predetermined Programmed Test Inputs (PTIs) was injected directly into the TVC signal. These PTIs were designed to excite the necessary vehicle dynamics while exhibiting a minimal impact on loads. The method is similar to common approaches in aircraft flight test programs, but with unique launch vehicle challenges due to rapidly changing states, short duration of flight, a tight flight envelope, and an inability to repeat any test. This paper documents the validation effort of the stability analysis tools to the flight data which was performed by comparing the post-flight calculated frequency response of the vehicle to the frequency response calculated by the stability analysis tools used to design and analyze the preflight models during the control design effort. The comparison between flight day frequency response and stability tool analysis for flight of the simulated vehicle shows good agreement and provides a high level of confidence in the stability analysis tools for use in any future program. This is true for both a nominal model as well as for dispersed analysis, which shows that the flight day frequency response is enveloped by the vehicle s preflight uncertainty models.

AdMoVeo: a robotic platform for teaching creative programming to designers

NARCIS (Netherlands)

Alers, S.H.M.; Hu, J.; Chang, M.; Kuo, R.; Kinshuk, xx; Chen, G.-D.; Hirose, M.

2009-01-01

Designing intelligent products, systems and related services require the designers to be able to integrate technology in their designs. Among other skills, programming is the key for the designers to prototype and experiment with the intelligent behaviors. However most of the design students do not

NDA PDP Program PuO2 increased particle size specification and design

International Nuclear Information System (INIS)

Marshall, R.S.; Taggart, D.P.; Becker, G.K.; Woon, W.Y.

1996-01-01

Provisions in the National TRU Program Quality Assurance Program Plan require an assessment of performance for nondestructive waste assay (NDA) systems employed in the program. This requirement is in part fulfilled through the use of Performance Demonstration programs. In order to optimize the quality and quantity of information acquired during a given Performance Demonstration Program cycle, the assessment employed is to be carefully specified and designed. The assessment must yield measurement system performance data meaningful with respect to NDA system capability to accommodate attributes of interest known to occur in actual waste forms. The design and specification of the increased particle size PuO 2 PDP working reference materials (WRMs) is directed at providing a straightforward mechanism to assess waste NDA system capability to account for biases introduced by large PuO 2 particles. The increased particle size PuO 2 PDP WRM design addresses actual waste form attributes associated with PuO 2 particle size and distributions thereof, the issue of a known and stable WRM configuration and equally important appropriate certification and tractability considerations

Program Design Report of the CNC Machine Tool(V-1)

International Nuclear Information System (INIS)

Youm, Ki Un; Moon, J. S.; Lee, I. B.; Youn, J. H.

2010-08-01

The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

Mathematical-programming approaches to test item pool design

NARCIS (Netherlands)

Veldkamp, Bernard P.; van der Linden, Willem J.; Ariel, A.

2002-01-01

This paper presents an approach to item pool design that has the potential to improve on the quality of current item pools in educational and psychological testing andhence to increase both measurement precision and validity. The approach consists of the application of mathematical programming

NASA Education Recommendation Report - Education Design Team 2011

Science.gov (United States)

Pengra, Trish; Stofan, James

2011-01-01

NASA people are passionate about their work. NASA's missions are exciting to learners of all ages. And since its creation in 1958, NASA's people have been passionate about sharing their inspiring discoveries, research and exploration with students and educators. In May 2010, NASA administration chartered an Education Design Team composed of 12 members chosen from the Office of Education, NASA's Mission Directorates and Centers for their depth of knowledge and education expertise, and directed them to evaluate the Agency's program in the context of current trends in education. By improving NASA's educational offerings, he was confident that the Agency can play a leading role in inspiring student interest in science, technology, engineering and mathematics (STEM) as few other organizations can. Through its unique workforce, facilities, research and innovations, NASA can expand its efforts to engage underserved and underrepresented communities in science and mathematics. Through the Agency's STEM education efforts and science and exploration missions, NASA can help the United States successfully compete, prosper and be secure in the 21st century global community. After several months of intense effort, including meeting with education experts; reviewing Administration policies, congressional direction and education research; and seeking input from those passionate about education at NASA, the Education Design Team made six recommendations to improve the impact of NASA's Education Program: (1) Focus the NASA Education Program to improve its impact on areas of greatest national need (2) Identify and strategically manage NASA Education partnerships (3) Participate in National and State STEM Education policy discussions (4) Establish a structure to allow the Office of Education, Centers and Mission Directorates to implement a strategically integrated portfolio (5) Expand the charter of the Education Coordinating Committee to enable deliberate Education Program design (6

ITER tungsten divertor design development and qualification program

Energy Technology Data Exchange (ETDEWEB)

Hirai, T., E-mail: takeshi.hirai@iter.org [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Escourbiac, F.; Carpentier-Chouchana, S.; Fedosov, A.; Ferrand, L.; Jokinen, T.; Komarov, V.; Kukushkin, A.; Merola, M.; Mitteau, R.; Pitts, R.A.; Shu, W.; Sugihara, M. [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Riccardi, B. [F4E, c/ Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Suzuki, S. [JAEA, Fusion Research and Development Directorate JAEA, 801-1 Mukouyama, Naka, Ibaragi 311-0193 (Japan); Villari, R. [Associazione EURATOM-ENEA sulla Fusione, Via Enrico Fermi 45, I-00044 Frascati, Rome (Italy)

2013-10-15

Highlights: • Detailed design development plan for the ITER tungsten divertor. • Latest status of the ITER tungsten divertor design. • Brief overview of qualification program for the ITER tungsten divertor and status of R and D activity. -- Abstract: In November 2011, the ITER Council has endorsed the recommendation that a period of up to 2 years be set to develop a full-tungsten divertor design and accelerate technology qualification in view of a possible decision to start operation with a divertor having a full-tungsten plasma-facing surface. To ensure a solid foundation for such a decision, a full tungsten divertor design, together with a demonstration of the necessary high performance tungsten monoblock technology should be completed within the required timescale. The status of both the design and technology R and D activity is summarized in this paper.

The design and implementation of vehicle scrapping programs

International Nuclear Information System (INIS)

Sahu, R.; Baxter, R.A.

1993-01-01

A number of metropolitan air basins in the US are currently faced with increased difficulty in attaining national and regional clean air standards. Significant controls on stationary sources over the years have allowed mobile sources to become the primary source of air emission in many areas. Programs allowing the use of mobile source offsets for stationary source emission by removal of older, higher emitting vehicles through scrappage programs are, therefore, conceptually attractive and are starting to be implemented. However, achieving success in such scrappage programs is a challenge given the associated technical, economic and social issues. This paper presents a discussion of the important issues that must be considered if vehicle scrappage programs are to be successful, including recent guidance and views of the EPA and state governments on the credits associated with the programs. Although the main focus of such programs is the reduction of criteria pollutants (CO, ROG, NO x , and PM 10 ), the impact on air toxics also has to be considered. The paper will then focus on the technical design of vehicle scrappage programs such that the resulting credits are real, verifiable, enforceable, and cost-effective. Information available under existing vehicle I/M programs along with economic, vehicle maintenance, and geographic data will be used with statistical techniques in order to meet predetermined program goals regarding emissions reduction and cost-effectiveness. A later case-study paper will discuss the actual implementation of such as program in an ozone non-attainment area

GCFR demonstration plant: conceptual design and status report

International Nuclear Information System (INIS)

1980-12-01

Helium Breeder Associates (HBA), a non-profit corporation, has been the program manager and technical integrator of the Gas-Cooled Fast Reactor (GCFR) development effort since 1977. When DOE discontinued support of the GCFR in 1980, the HBA members undertook the task of providing for an orderly termination and documentation of the program. HBA does not agree with the government's rational for withdrawing support for this promising technology and has directed its termination and documentation toward preserving the current state of its development. Toward that end, HBA has compiled the following report which is a summary of the conceptual design of the demonstration plant and status of the program as of the end of 1980. It includes summaries of tasks that have not evolved to a final conclusion. Although the report has not been subjected to formal review and approval by the designers, it is intended to provide the reader with the design considerations that were current at the time of program termination. It is hoped that the report will be useful in restarting the program in the future by establishing the basis of the completed conceptual design and indicating a logical path for new design and development

Industrial design as an innovative element in engineering education

DEFF Research Database (Denmark)

Schjær-Jacobsen, Hans; Abou-Hayt, Imad; Ashworth, David

2012-01-01

This paper describes how the Copenhagen University College of Engineering (IHK), in our continuing effort to innovate the engineering study programs, have introduced strong industrial design elements in the 210 ECTS Bachelor of Mechanical Engineering program as well as the 30 ECTS International...... Design Semester and the 10 ECTS Summer School in International Design and Development. The paper describes how implementation of novel industrial design subject areas requires the creation of new laboratory and workshop facilities in order to combine traditional engineering design disciplines...... with creative design as a driver of innovation. With a practical and problem based learning approach at IHK the students are asked to work closely together with companies to come up with engineering solutions that are sustainable from both an engineering and a design perspective....

Implementation of Effective Capstone Projects in Undergraduate Manufacturing Design Engineering Program

Science.gov (United States)

Viswanathan, Shekar

2017-01-01

Final program projects (capstone course) in manufacturing design engineering technology at National University are intensive experiences in critical thinking and analysis, designed to broaden students' perspectives and provide an opportunity for integration of coursework in the area of manufacturing design engineering. This paper focuses on three…

The computer program system for structural design of nuclear power plants

International Nuclear Information System (INIS)

Aihara, S.; Atsumi, K.; Sasagawa, K.; Satoh, S.

1979-01-01

In recent days, the design method of the Nuclear Power Plant has become more complex than in the past. The Finite Element Method (FEM) applied for analysis of Nuclear Power Plants, especially requires more computer use. The recent computers have made remarkable progress, so that in design work manpower and time necessary for analysis have been reduced considerably. However, instead the arrangement of outputs have increased tremendously. Therefore, a computer program system was developed for performing all of the processes, from data making to output arrangement, and rebar evaluations. This report introduces the computer program system pertaining to the design flow of the Reactor Building. (orig.)

Central receiver solar thermal power system. Phase 1. CDRL item 2; Pilot Plant preliminary design report. Volume II. System decription and system analysis

Energy Technology Data Exchange (ETDEWEB)

Hallet, Jr., R. W.; Gervais, R. L.

1977-10-01

An active system analysis and integration effort has been maintained. These activities have included the transformation of initial program requirements into a preliminary system design, the evolution of subsystem requirements which lay the foundation for subsystem design and test activity, and the overseeing of the final preliminary design effort to ensure that the subsystems are operationally compatible and capable of producing electricity at the lowest possible cost per unit of energy. Volume II of the Preliminary Design Report presents the results of the overall system effort that went on during this contract. The effort is assumed to include not only the total system definition and design but also all subsystem interactions.

Design of the CART data system for the US Department of Energy's ARM Program

International Nuclear Information System (INIS)

Melton, R.B.; Campbell, A.P.; Edwards, D.M.; Kanciruk, P.; Tichler, J.L.

1991-01-01

The Department of Energy (DOE) has initiated a major atmospheric research effort to reduce the uncertainties found in general circulation and other models due to the effects of clouds and radiation. The objective of the Atmospheric Radiation Measurement Program (ARM) is to provide an experimental testbed for the study of important atmospheric effects, particularly cloud and radiative processes, and testing parameterizations of the processes for use in atmospheric models. This experimental testbed, known as the Clouds and Radiation Testbed (CART), will include a complex data system, the CART Data Environment (CDE). The major functions of the CDE will be to: acquire environments from instruments and external data sources; perform quality assessments of the data streams; create data streams of known quality to be used as model input compared to model output; execute the models and capture their predictions; and make data streams associated with model tests available to ARM investigators in near real-time. The CDE will also be expected to capture ancillary information (''meta-data'') associated with the data streams, provide data management facilities for design of ARM experiments, and provide for archival data storage. The first section of this paper presents background information on CART. Next the process for the functional design of the system is described, the functional requirements summarized, and the conceptual architecture of the CDE is presented. Finally, the status of the CDE design activities is summarized, and major technical challenges are discussed

Planning for Program Design and Assessment Using Value Creation Frameworks

Science.gov (United States)

Whisler, Laurel; Anderson, Rachel; Brown, Jenai

2017-01-01

This article explains a program design and planning process using the Value Creation Framework (VCF) developed by Wenger, Trayner, and de Laat (2011). The framework involves identifying types of value or benefit for those involved in the program, conditions and activities that support creation of that value, data that measure whether the value was…

Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

Science.gov (United States)

Miller, Beth R.

2017-01-01

The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

Designing and Deploying Programming Courses: Strategies, Tools, Difficulties and Pedagogy

Science.gov (United States)

Xinogalos, Stelios

2016-01-01

Designing and deploying programming courses is undoubtedly a challenging task. In this paper, an attempt to analyze important aspects of a sequence of two courses on imperative-procedural and object-oriented programming in a non-CS majors Department is made. This analysis is based on a questionnaire filled in by fifty students in a voluntary…

Students' Academic Performance: Academic Effort Is an Intervening ...

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH ... Students' Academic Performance: Academic Effort Is an Intervening Variable ... This study was designed to seek explanations for differences in academic performance among junior ...

Instructional Design of a Programming Course

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Bennedsen, Jens

2007-01-01

We present a brief overview of a model for the human cognitive architecture and three learning theories based on this model: cognitive load theory, cognitive apprenticeship, and worked examples (a key area of cognitive skill acquisition). Based on this brief overview we argue how an introductory...... object-oriented programming course is designed according to results of cognitive science and educational psychology in general and cognitive load theory and cognitive skill acquisition in particular; the principal techniques applied are: worked examples, scaffolding, faded guidance, cognitive...

Robust Control Design via Linear Programming

Science.gov (United States)

Keel, L. H.; Bhattacharyya, S. P.

1998-01-01

This paper deals with the problem of synthesizing or designing a feedback controller of fixed dynamic order. The closed loop specifications considered here are given in terms of a target performance vector representing a desired set of closed loop transfer functions connecting various signals. In general these point targets are unattainable with a fixed order controller. By enlarging the target from a fixed point set to an interval set the solvability conditions with a fixed order controller are relaxed and a solution is more easily enabled. Results from the parametric robust control literature can be used to design the interval target family so that the performance deterioration is acceptable, even when plant uncertainty is present. It is shown that it is possible to devise a computationally simple linear programming approach that attempts to meet the desired closed loop specifications.

Java programming fundamentals problem solving through object oriented analysis and design

CERN Document Server

Nair, Premchand S

2008-01-01

While Java texts are plentiful, it's difficult to find one that takes a real-world approach, and encourages novice programmers to build on their Java skills through practical exercise. Written by an expert with 19 experience teaching computer programming, Java Programming Fundamentals presents object-oriented programming by employing examples taken from everyday life. Provides a foundation in object-oriented design principles and UML notation Describes common pitfalls and good programming practicesFurnishes supplemental links, documents, and programs on its companion website, www.premnair.netU

PUZZLE - A program for computer-aided design of printed circuit artwork

Science.gov (United States)

Harrell, D. A. W.; Zane, R.

1971-01-01

Program assists in solving spacing problems encountered in printed circuit /PC/ design. It is intended to have maximum use for two-sided PC boards carrying integrated circuits, and also aids design of discrete component circuits.

SRS ES and H Standards Compliance Program Implementation Plan

International Nuclear Information System (INIS)

Hearn, W.H.

1993-01-01

On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the U.S. Department of Energy (DOE), called for three actions: identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; assessment of the adequacy of those standards for protecting public health and safety; and determination of the extent to which they have and are being implemented. The purpose of this Implementation Plan is to define the single program for all sitewide and facility 90-2 ES and H Standards Compliance efforts, which will satisfy the HQ Implementation Plan, avoid duplicate efforts, be as simple and achievable as possible, include cost-saving innovations, use a graded approach based on facility hazards and future needs of facilities, and support configuration control for facility requirements. The Defense Waste Processing Facility (DWPF) has been designated a pilot facility for the 90-2 program and has progressed with their facility program ahead of the site-level program. The DWPF, and other Government-Owned Contractor-Operated (GOCO) facilities that progress on an enhanced schedule, will serve as pilot facilities for the site-level program. The lessons learned with their requirement identifications, and their assessments of the adequacy of and their compliance with these requirements will be used to improve the efficiency of the site-level and subsequent programs

Targeting women or transforming institutions? Policy lessons from NGO anti-poverty efforts.

Science.gov (United States)

Kabeer, N

1995-05-01

Some research has found that the extent of gender-based discrimination in market-based institutions and unfair advantages within domestic and market institutions meant women were less successful in translating education and work into income and purchasing power. Anti-poverty programs functioned without specifically addressing the implications for women and children. Women-in-development efforts attempted to compensate for prior deficiencies by promotion of income generation schemes for women. In this article, the suggestion is made for policy makers to design projects with goals, objectives, and strategies that are clear, consistent, and well-informed about gender. Efforts should be made to avoid debates about women-only versus integrated projects. The experiences of nongovernmental organizations (NGOs) in the South Asian context offer lessons in good policy efforts to address all forms of marginalization. The definition of women's needs must be provided by women themselves; openness and flexibility are recommended. Participatory approaches serve the aims of needs identification, involvement in democratic processes, and awareness of constraints on women's use of resources. In credit lending, constraints were overcome by compensating for the absence of material collateral, guaranteeing physical access, simplifying procedures, and subsidizing access rather than interest rates. Underlying structural conditions that reinforce inequalities by gender are in need of change. Empowerment of women would assure that marginalization would not occur.

Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

1993-01-01

The design of a measurement program devoted to parameter identification of structural dynamic systems is considered. The design problem is formulated as an optimization problem to minimize the total expected cost that is the cost of failure and the cost of the measurement program. All...... the calculations are based on a priori knowledge and engineering judgement. One of the contribution of the approach is that the optimal number of sensory can be estimated. This is shown in an numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement...

Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

1991-01-01

The design of a measurement program devoted to parameter identification of structural dynamic systems is considered. The design problem is formulated as an optimization problem to minimize the total expected cost, i.e. the cost of failure and the cost of the measurement program. All...... the calculations are based on a priori knowledge and engineering judgement. One of the contributions of the approach is that the optimal number of sensors can be estimated. This is shown in a numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement...

Prototype development of radio frequency cavity and quadrupole for ADSS - initial efforts by mechanical design and prototype development section

International Nuclear Information System (INIS)

Kumar, Manish; Kamble, Sunil; Choughule, L.S.; Kumar, Sunil; Patankar, S.R.; Phalke, V.M.; Dharmik, D.A.; Singh, Tejinder; Ram, Y.; Chaudhari, A.T.; Pathak, Kavindra; Prasad, N.K.; Marathe, V.V.; Matkar, A.W.

2007-01-01

Mechanical Design and Prototype Development Section has participated in the efforts for development of RF cavity and Quadrupole for ADSS. Recently prototype Super conducting RF cavity, Radio Frequency Quadrupole (RFQ), Radio Frequency Quadrupole (RFQ) Simulation Chamber and related experimental setups were developed, fabricated and delivered for the characterisation of various relevant parameters. Under the program for development of Super conducting RF Cavity for high-energy section of LINAC of ADS first prototype RF Cavity of ETP copper was developed by machining and brazing process. The prototype cavity having elliptical and circular profile is the heart of this setup. The cavity is made up of two symmetrical cups joined together by welding or brazing. Various methods are being tried out by MD and PDS for the fabrication of cups and joining them together. Manufacturing of cup by machining and joining them by conventional brazing technique to make the cavity was the first step in this direction. Another method of manufacturing and joining viz forming of cup by deep drawing and joining them by EB welding is in progress. RFQ is a versatile and efficient system for accelerating ion beams especially at low energy. It works in quadrupole mode, which is at 350M Hz. RFQ Focuses, Bunches and Accelerates the beam simultaneously. The bunching is done in this RFQ, which results in more than 95% transmission where as in the normal buncher the transmission is less than 40%. The actual RFQ, which is designed for the PURNIMA facility, will be fabricated from OFHC copper that will accelerate a deuteron (D+) ion beam from 50keV to 400keV over its 1.37meter length. For the validation of manufacturing process and characterisation of various parameters at low frequency a 500mm long prototype RFQ in Aluminium with an accuracy of ± 25microns and surface finish of 1.6 micron has been fabricated by MD and PDS. A simplified simulation chamber to facilitate the development of RFQ for

Re-designing an Earth Sciences outreach program for Rhode Island public elementary schools to address new curricular standards and logistical realities in the community

Science.gov (United States)

Richter, N.; Vachula, R. S.; Pascuzzo, A.; Prilipko Huber, O.

2017-12-01

In contrast to middle and high school students, elementary school students in Rhode Island (RI) have no access to dedicated science teachers, resulting in uneven quality and scope of science teaching across the state. In an attempt to improve science education in local public elementary schools, the Department of Earth, Environmental, and Planetary Sciences (DEEPS) at Brown University initiated a student-driven science-teaching program that was supported by a NSF K-12 grant from 2007 to 2014. The program led to the development of an extensive in-house lesson plan database and supported student-led outreach and teaching in several elementary and middle school classrooms. After funding was terminated, the program continued on a volunteer basis, providing year-round science teaching for several second-grade classrooms. During the 2016-2017 academic year, New Generation Science Standards (NGSS) were introduced in RI public schools, and it became apparent that our outreach efforts required adaptation to be more efficient and relevant for both elementary school students and teachers. To meet these new needs, DEEPS, in collaboration with the Providence Public School District, created an intensive summer re-design program involving both graduate and undergraduate students. Three multi-lesson units were developed in collaboration with volunteer public school teachers to specifically address NGSS goals for earth science teaching in 2nd, 3rd and 4th grades. In the 2017-2018 academic year DEEPS students will co-teach the science lessons with the public school teachers in two local elementary schools. At the end of the next academic year all lesson plans and activities will be made publically available through a newly designed DEEPS outreach website. We herein detail our efforts to create and implement new educational modules with the goals of: (1) empowering teachers to instruct science, (2) engaging students and fostering lasting STEM interest and competency, (3) optimizing

Korean efforts for education and training network in nuclear technology

International Nuclear Information System (INIS)

Han, Kyong-Won; Lee, Eui-Jin

2007-01-01

Nuclear energy has been a backbone for Korea's remarkable economic growth, and will continue its essential role with 18 nuclear power plants in operation, 2 more units under construction, 6 more units in planning. Korea is operating its own designed nuclear power plants, such as KSNP, 1400, as well as self-design and operation of 30 MW Hanaro research reactor. Korea makes strong efforts to develop future nuclear technology. They are the System-Integrated Modular Advanced Reactor, SMART, Korea Advanced Liquid Metal reactor, KALIMER, Hydrogen Production reactor, and Proliferation-resistant Nuclear Fuel Cycle. In parallel, Korea is establishing an Advanced Radiation Technology R and D Center and a High Power Proton Accelerator Center. International, next generation nuclear power technologies are being developed through projects such as the IAEA Innovative Nuclear Reactors and Fuel Cycle, INPRO, Generation IV International Forum, GIF, and International thermonuclear Experimental reactor, ITER. In the new millennium, Korea expects that radiation technology combined with bio, nano, and space technology will sustain our civilization. About 21,000 qualified nuclear human resources are engaged in power and non-power fields such as design and manufacturing of equipment, plant operation and maintenance, safety, RI production, R and D, etc. However, it is recognized that the first generation of nuclear work force is getting older and retired, less of our youth are studying nuclear science and engineering. Korean Government has established a promotion program on nuclear human resources development, which is needed until 2010. For the sustainable development of nuclear science and technology, it calls for more qualified human resources. We ought to encourage our youth to become more interested in nuclear studies and careers. Korea is making strong efforts to support nuclear education and training for young generations. It is believed that internationally accepted advanced

A community-based obesity prevention program for minority children: rationale and study design for Hip-Hop to Health Jr.

Science.gov (United States)

Fitzgibbon, Marian L; Stolley, Melinda R; Dyer, Alan R; VanHorn, Linda; KauferChristoffel, Katherine

2002-02-01

BACKGROUND; The increasing prevalence of overweight among children in the United States presents a national health priority. Higher rates of overweight/obesity among minority women place their children at increased risk. Although increased rates of overweight are observed in 4- to 5-year-old children, they are not observed in 2- to 3-year-old children. Therefore, early prevention efforts incorporating families are critical. The primary aim of Hip-Hop to Health Jr. is to alter the trajectory toward overweight/obesity among preschool African-American and Latino children. This 5-year randomized intervention is conducted in 24 Head Start programs, where each site is randomized to either a 14-week dietary/physical activity intervention or a general health intervention. This paper presents the rationale and design of the study. Efficacy of the intervention will be determined by weight change for the children and parent/caretaker. Secondary measures include reductions in dietary fat and increases in fiber, fruit/vegetable intake, and physical activity. Baseline data will be presented in future papers. The problem of overweight/obesity is epidemic in the United States. Behaviors related to diet and physical activity are established early in life and modeled by family members. Early intervention efforts addressing the child and family are needed to prevent obesity later in life. This paper describes a comprehensive, family-oriented obesity prevention program for minority preschool children. Copyright 2002 American Health Foundation and Elsevier Science (USA).

R&D PROPOSAL FOR THE NATIONAL MUON ACCELERATOR PROGRAM

OpenAIRE

Zisman, Michael S.

2011-01-01

This document contains a description of a multi-year national R&D program aimed at completing a Design Feasibility Study (DFS) for a Muon Collider and, with international participation, a Reference Design Report (RDR) for a muon-based Neutrino Factory. It also includes the supporting component development and experimental efforts that will inform the design studies and permit an initial down-selection of candidate technologies for the ionization cooling and acceleration systems. We intend to ...

Using CFD as a Rocket Injector Design Tool: Recent Progress at Marshall Space Flight Center

Science.gov (United States)

Tucker, Kevin; West, Jeff; Williams, Robert; Lin, Jeff; Canabal, Francisco; Rocker, marvin; Robles, Bryan; Garcia, Robert; Chenoweth, James

2005-01-01

New programs are forcing American propulsion system designers into unfamiliar territory. For instance, industry s answer to the cost and reliability goals set out by the Next Generation Launch Technology Program are engine concepts based on the Oxygen- Rich Staged Combustion Cycle. Historical injector design tools are not well suited for this new task. The empirical correlations do not apply directly to the injector concepts associated with the ORSC cycle. These legacy tools focus primarily on performance with environment evaluation a secondary objective. Additionally, the environmental capability of these tools is usually one-dimensional while the actual environments are at least two- and often three-dimensional. CFD has the potential to calculate performance and multi-dimensional environments but its use in the injector design process has been retarded by long solution turnaround times and insufficient demonstrated accuracy. This paper has documented the parallel paths of program support and technology development currently employed at Marshall Space Flight Center in an effort to move CFD to the forefront of injector design. MSFC has established a long-term goal for use of CFD for combustion devices design. The work on injector design is the heart of that vision and the Combustion Devices CFD Simulation Capability Roadmap that focuses the vision. The SRL concept, combining solution fidelity, robustness and accuracy, has been established as a quantitative gauge of current and desired capability. Three examples of current injector analysis for program support have been presented and discussed. These examples are used to establish the current capability at MSFC for these problems. Shortcomings identified from this experience are being used as inputs to the Roadmap process. The SRL evaluation identified lack of demonstrated solution accuracy as a major issue. Accordingly, the MSFC view of code validation and current MSFC-funded validation efforts were discussed in

Chasing Innovation: A Pilot Case Study of a Rhizomatic Design Thinking Education Program

Science.gov (United States)

Biffi, Alfredo; Bissola, Rita; Imperatori, Barbara

2017-01-01

Purpose: The purpose of this paper is to illustrate and discuss the main features and key challenges of an original post-graduate education program designed according to an innovative theoretical framework promoting design thinking in a rhizomatic approach. By involving different stakeholders, the aim of this entrepreneurship education program is…

Iraq's shop-till-you-drop nuclear program

International Nuclear Information System (INIS)

Albright, D.; Hibbs, M.

1992-01-01

In a series of articles that began in March 1991, the authors have tried to separate fact from fiction about Iraq's ability to build nuclear weapons and to produce material to fuel them. After exposing Iraq's efforts to enrich uranium and design an atomic bomb, UN and IAEA experts zeroed in on how Iraq put its program together. The basic answer is that along with determination and persistence, Iraq had a great deal of foreign help. Iraq's 'Petrochemical Three,' the secret nuclear program conducted under the authority of its Atomic Energy Commission with links to the Defense Ministry and the Ministry of Industry and Military Industrialization, received massive infusions of money and resources. Like the Manhattan Project that built the first atomic bombs in the United States, Iraq's program simultaneously pursued a number of different technical avenues to the bomb. Not knowing which efforts would succeed, Iraq poured billions of dollars into its multifaceted quest. Providing for these programs required the establishment of elaborate procurement networks in Europe, North America, and Asia. Like the technical quest, the procurement effort was carried out on many fronts at once. Diplomacy and secrecy were required, because few companies would knowingly supply a nuclear weapons program, or even a secret nuclear program that was ostensibly for civil purposes. Iraq showed great ingenuity in hiding its purchases behind such innocuous pursuits as automobile manufacturing, dairy production, and oil refining

A Computer Program for Drip Irrigation System Design for Small Plots

Science.gov (United States)

Philipova, Nina; Nicheva, Olga; Kazandjiev, Valentin; Chilikova-Lubomirova, Mila

2012-12-01

A computer programhas been developed for design of surface drip irrigation system. It could be applied for calculation of small scale fields with an area up to 10 ha. The program includes two main parts: crop water requirements and hydraulic calculations of the system. It has been developed in Graphical User Interface in MATLAB and gives opportunity for selecting some parameters from tables such as: agro- physical soil properties, characteristics of the corresponding crop, climatic data. It allows the user of the program to assume and set a definite value, for example the emitter discharge, plot parameters and etc. Eight cases of system layout according to the water source layout and the number of plots of the system operation are laid into hydraulic section of the program. It includes the design of lateral, manifold, main line and pump calculations. The program has been compiled to work in Windows.

Learning Alone, Together: Closed-Cohort Structure in an Online Journalism and Mass Communication Graduate Program

Science.gov (United States)

Blankenship, Justin C.; Gibson, Rhonda

2016-01-01

In a closed-cohort educational program design, students enter a program together, take the same courses together, and, ideally, graduate together. In an effort to increase interaction and communication among students, it has been utilized more and more for online graduate programs. This article surveyed students in one of the few closed-cohort…

Design and evaluation of an end-user friendly tool for robot programming

NARCIS (Netherlands)

Buchina, N.; Barakova, E.I.; Kamel, S.M.W.

2016-01-01

End-user programming for robots is becoming an increasingly important topic since robots are being introduced into a wide variety of domains. We propose a design of a web based programming interface that makes it possible for end-users with different backgrounds to program robots using natural

Does Implementation Follow Design? A Case Study of a Workplace Health Promotion Program Using the 4-S Program Design and the PIPE Impact Metric Evaluation Models.

Science.gov (United States)

Äikäs, Antti Hermanni; Pronk, Nicolaas P; Hirvensalo, Mirja Hannele; Absetz, Pilvikki

2017-08-01

The aim of this study was to describe the content of a multiyear market-based workplace health promotion (WHP) program and to evaluate design and implementation processes in a real-world setting. Data was collected from the databases of the employer and the service provider. It was classified using the 4-S (Size, Scope, Scalability, and Sustainability) and PIPE Impact Metric (Penetration, Implementation) models. Data analysis utilized both qualitative and quantitative methods. Program design covered well the evidence-informed best practices except for clear path toward sustainability, cooperation with occupational health care, and support from middle-management supervisors. The penetration rate among participants was high (99%) and majority (81%) of services were implemented as designed. Study findings indicate that WHP market would benefit the use of evidence-based design principles and tendentious decisions to anticipate a long-term implementation process already during the planning phase.

Analytical Tools for Space Suit Design

Science.gov (United States)

Aitchison, Lindsay

2011-01-01

As indicated by the implementation of multiple small project teams within the agency, NASA is adopting a lean approach to hardware development that emphasizes quick product realization and rapid response to shifting program and agency goals. Over the past two decades, space suit design has been evolutionary in approach with emphasis on building prototypes then testing with the largest practical range of subjects possible. The results of these efforts show continuous improvement but make scaled design and performance predictions almost impossible with limited budgets and little time. Thus, in an effort to start changing the way NASA approaches space suit design and analysis, the Advanced Space Suit group has initiated the development of an integrated design and analysis tool. It is a multi-year-if not decadal-development effort that, when fully implemented, is envisioned to generate analysis of any given space suit architecture or, conversely, predictions of ideal space suit architectures given specific mission parameters. The master tool will exchange information to and from a set of five sub-tool groups in order to generate the desired output. The basic functions of each sub-tool group, the initial relationships between the sub-tools, and a comparison to state of the art software and tools are discussed.

Conceptual design report for the scientific program of the super-FRS experiment collaboration

International Nuclear Information System (INIS)

2016-01-01

This Conceptual Design Report (CDR) presents the plans of the Super-FRS Experiment Collaboration for a variety of experiments, which build on the versatile high-resolution separator and spectrometer performance of the Super-FRS. The characteristic feature of these experiments is the fact that they use the separator as an integral part of the measurement. These experiments build on the experience of the collaboration and their scientific program pursued at the FRS in the last 25 years, but also includes recently developed novel topics. Under these premises, the Super-FRS Experiment Collaboration has identified ten major topics of current interest and with far-reaching scientific potential. In this CDR, the scientific case is briefly recapitulated and the conceptual design of the experiments, the setups and their implementation are described. Much of the needed equipment is already available or, if not, will be realized with new, additional resources and efforts outside the FAIR Cost Books. The related R and D works and some pilot experiments can be carried out at the existing FRS of GSI in FAIR Phase-0. On the midterm, the science program of this collaboration can start at the commissioning phase of the Super-FRS and will continue on the long term with the established full performance. Accordingly, the prototype equipment and other already existing devices can be tested and used at the FRS and can later, when completed or upgraded, be moved to the Super-FRS. The related developments and organization of the Super-FRS Experiment Collaboration are described,and the collaboration partners and institutes are listed. The Super-FRS Experiment Collaboration is formally and firmly established and is a comprising part of the NUSTAR Collaboration. A large variety of modern nuclear physics experiments with new scientific possibilities and outstanding scientific potential were presented in the scientific program (GSI-Report 2014-4), which was very positively evaluated and

Conceptual design report for the scientific program of the super-FRS experiment collaboration

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-11-01

This Conceptual Design Report (CDR) presents the plans of the Super-FRS Experiment Collaboration for a variety of experiments, which build on the versatile high-resolution separator and spectrometer performance of the Super-FRS. The characteristic feature of these experiments is the fact that they use the separator as an integral part of the measurement. These experiments build on the experience of the collaboration and their scientific program pursued at the FRS in the last 25 years, but also includes recently developed novel topics. Under these premises, the Super-FRS Experiment Collaboration has identified ten major topics of current interest and with far-reaching scientific potential. In this CDR, the scientific case is briefly recapitulated and the conceptual design of the experiments, the setups and their implementation are described. Much of the needed equipment is already available or, if not, will be realized with new, additional resources and efforts outside the FAIR Cost Books. The related R and D works and some pilot experiments can be carried out at the existing FRS of GSI in FAIR Phase-0. On the midterm, the science program of this collaboration can start at the commissioning phase of the Super-FRS and will continue on the long term with the established full performance. Accordingly, the prototype equipment and other already existing devices can be tested and used at the FRS and can later, when completed or upgraded, be moved to the Super-FRS. The related developments and organization of the Super-FRS Experiment Collaboration are described,and the collaboration partners and institutes are listed. The Super-FRS Experiment Collaboration is formally and firmly established and is a comprising part of the NUSTAR Collaboration. A large variety of modern nuclear physics experiments with new scientific possibilities and outstanding scientific potential were presented in the scientific program (GSI-Report 2014-4), which was very positively evaluated and

Extending cluster lot quality assurance sampling designs for surveillance programs.

Science.gov (United States)

Hund, Lauren; Pagano, Marcello

2014-07-20

Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

Technical reference book for the Energy Economic Data Base (EEDB) Program

International Nuclear Information System (INIS)

Allen, R.E.; Benedict, R.G.; Hodson, J.S.

1984-09-01

The Energy Economic Data Base (EEDB) Program is sponsored by the US Department of Energy (DOE) for the purpose of developing current technical and cost information for nuclear and comparison electric power generating stations. The EEDB contains a variety of nuclear and coal-fired power plant technical data models. Each of these data models is a complete and detailed conceptual design for a single unit, commercial, steam electric, power generating station located on a standard hypothetical Middletown site. A major effort for the Sixth Update (1983) has been the updating of the system design descriptions and selected engineering drawings for the technical data models. This update took the form of revising and expanding the system design descriptions and engineering drawings contained in the Base Data Studies, to include the technical information developed and recorded in the first five EEDB updates. The results of the update effort are contained in this EEDB Program Technical Reference Book

Electron ray tracing programs for gun design and beam transport

International Nuclear Information System (INIS)

Herrmannsfeldt, W.B.

1988-05-01

Computer simulation of electron and ion sources is made by using a class of computer codes known as gun design programs. In this paper, we shall first list most of the necessary and some optional capabilities of such programs. Then we will briefly note specific codes and/or authors of codes with attention to specialized applications if any. There may be many more such programs in use than are treated here; we are only trying to cover a range of examples, not perform a comprehensive survey

Response efficiency during functional communication training: effects of effort on response allocation.

OpenAIRE

Richman, D M; Wacker, D P; Winborn, L

2001-01-01

An analogue functional analysis revealed that the problem behavior of a young child with developmental delays was maintained by positive reinforcement. A concurrent-schedule procedure was then used to vary the amount of effort required to emit mands. Results suggested that response effort can be an important variable when developing effective functional communication training programs.

NRC/RSR Data Bank Program

International Nuclear Information System (INIS)

Bankert, S.F.; Evans, C.D.; Hardy, H.A.; Litteer, G.L.; Schulz, G.L.; Smith, N.C.

1978-01-01

The United States Nuclear Regulatory Commission (NRC) has established the NRC/Reactor Safety Research (RSR) Data Bank Program to provide a means of collecting, processing, and making available experimental data from the many domestic and foreign water reactor safety research programs. The NRC/RSR Data Bank Program collects qualified engineering data from experimental program data bases, stores the data in a single data bank in a common format, and makes the data available to users. The program is designed to be user oriented to minimize the effort required to obtain and manipulate data of interest. The data bank concept and structure embodied in the data bank processing system are applicable to any program where large quantities of scientific (numeric) data are generated and require compiling, storage, and accessing in order to be collected and made available to multiple users. 3 figures

A national clinical quality program for Veterans Affairs catheterization laboratories (from the Veterans Affairs clinical assessment, reporting, and tracking program).

Science.gov (United States)

Maddox, Thomas M; Plomondon, Mary E; Petrich, Megan; Tsai, Thomas T; Gethoffer, Hans; Noonan, Gregory; Gillespie, Brian; Box, Tamara; Fihn, Stephen D; Jesse, Robert L; Rumsfeld, John S

2014-12-01

A "learning health care system", as outlined in a recent Institute of Medicine report, harnesses real-time clinical data to continuously measure and improve clinical care. However, most current efforts to understand and improve the quality of care rely on retrospective chart abstractions complied long after the provision of clinical care. To align more closely with the goals of a learning health care system, we present the novel design and initial results of the Veterans Affairs (VA) Clinical Assessment, Reporting, and Tracking (CART) program-a national clinical quality program for VA cardiac catheterization laboratories that harnesses real-time clinical data to support clinical care and quality-monitoring efforts. Integrated within the VA electronic health record, the CART program uses a specialized software platform to collect real-time patient and procedural data for all VA patients undergoing coronary procedures in VA catheterization laboratories. The program began in 2005 and currently contains data on 434,967 catheterization laboratory procedures, including 272,097 coronary angiograms and 86,481 percutaneous coronary interventions, performed by 801 clinicians on 246,967 patients. We present the initial data from the CART program and describe 3 quality-monitoring programs that use its unique characteristics-procedural and complications feedback to individual labs, coronary device surveillance, and major adverse event peer review. The VA CART program is a novel approach to electronic health record design that supports clinical care, quality, and safety in VA catheterization laboratories. Its approach holds promise in achieving the goals of a learning health care system. Published by Elsevier Inc.

Post accident training program design at Three Mile Island

International Nuclear Information System (INIS)

Lawyer, L.L.

1981-01-01

The TMI preaccident training staff typically consisted of 9 professional and 3 administrative support persons. Procedures were prepared and facilities designated for operator training. The thrust of the post accident effort was directed to expanding the training function to include all other personnel while modifying the operator training to address lessons learned. Significant experiences were encountered in part task simulation, job and task analysis, decision analysis and with various external committees. These experiences led to specific opinions on industry needs in the areas of staffing, regulation, importance of training and contractor assistance

Grade pending: lessons for hospital quality reporting from the New York City restaurant sanitation inspection program.

Science.gov (United States)

Ryan, Andrew M; Detsky, Allan S

2015-02-01

Public quality reporting programs have been widely implemented in hospitals in an effort to improve quality and safety. One such program is Hospital Compare, Medicare's national quality reporting program for US hospitals. The New York City sanitary grade inspection program is a parallel effort for restaurants. The aims of Hospital Compare and the New York City sanitary inspection program are fundamentally similar: to address a common market failure resulting from consumers' lack of information on quality and safety. However, by displaying easily understandable information at the point of service, the New York City sanitary inspection program is better designed to encourage informed consumer decision making. We argue that this program holds important lessons for public quality reporting of US hospitals. © 2014 Society of Hospital Medicine.

Control system design and analysis using the INteractive Controls Analysis (INCA) program

Science.gov (United States)

Bauer, Frank H.; Downing, John P.

1987-01-01

The INteractive Controls Analysis (INCA) program was developed at the Goddard Space Flight Center to provide a user friendly efficient environment for the design and analysis of linear control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. Moreover, the results of the analytic tools imbedded in INCA have been flight proven with at least three currently orbiting spacecraft. This paper describes the INCA program and illustrates, using a flight proven example, how the package can perform complex design analyses with relative ease.

Analysis of three-phase power-supply systems using computer-aided design programs

International Nuclear Information System (INIS)

Oberst, E.F.

1977-01-01

A major concern of every designer of large, three-phase power-supply systems is the protection of system components from overvoltage transients. At present, three computer-aided circuit design programs are available in the Magnetic Fusion Energy (MFE) National Computer Center that can be used to analyze three-phase power systems: MINI SCEPTRE, SPICE I, and SPICE II. These programs have been used at Lawrence Livermore Laboratory (LLL) to analyze the operation of a 200-kV dc, 20-A acceleration power supply for the High Voltage Test Stand. Various overvoltage conditions are simulated and the effectiveness of system protective devices is observed. The simulated overvoltage conditions include such things as circuit breaker openings, pulsed loading, and commutation voltage surges in the rectifiers. These examples are used to illustrate the use of the computer-aided, circuit-design programs discussed in this paper

Design and Curriculum Considerations for a Computer Graphics Program in the Arts.

Science.gov (United States)

Leeman, Ruedy W.

This history and state-of-the-art review of computer graphics describes computer graphics programs and proposed programs at Sheridan College (Canada), the Rhode Island School of Design, the University of Oregon, Northern Illinois University, and Ohio State University. These programs are discussed in terms of their philosophy, curriculum, student…

Developing an integrated dam safety program

International Nuclear Information System (INIS)

Nielsen, N. M.; Lampa, J.

1996-01-01

An effort has been made to demonstrate that dam safety is an integral part of asset management which, when properly done, ensures that all objectives relating to safety and compliance, profitability, stakeholders' expectations and customer satisfaction, are achieved. The means to achieving this integration of the dam safety program and the level of effort required for each core function have been identified using the risk management approach to pinpoint vulnerabilities, and subsequently to focus priorities. The process is considered appropriate for any combination of numbers, sizes and uses of dams, and is designed to prevent exposure to unacceptable risks. 5 refs., 1 tab

Building smart cities analytics, ICT, and design thinking

CERN Document Server

Stimmel, Carol L

2015-01-01

The term "smart city" defines the new urban environment, one that is designed for performance through information and communication technologies. Given that the majority of people across the world will live in urban environments within the next few decades, it's not surprising that massive effort and investment is being placed into efforts to develop strategies and plans for achieving "smart" urban growth. Building Smart Cities: Analytics, ICT, and Design Thinking explains the technology and a methodology known as design thinking for building smart cities. Information and communications technologies form the backbone of smart cities. A comprehensive and robust data analytics program enables the right choices to be made in building these cities. Design thinking helps to create smart cities that are both livable and able to evolve. This book examines all of these components in the context of smart city development and shows how to use them in an integrated manner. Using the principles of design thinking to refr...

Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

Energy Technology Data Exchange (ETDEWEB)

Schriner, H.; Davies, B.; Sniegowski, J.; Rodgers, M.S.; Allen, J.; Shepard, C.

1998-05-01

Research and development in the design and manufacture of Microelectromechanical Systems (MEMS) is growing at an enormous rate. Advances in MEMS design tools and fabrication processes at Sandia National Laboratories` Microelectronics Development Laboratory (MDL) have broadened the scope of MEMS applications that can be designed and manufactured for both military and commercial use. As improvements in micromachining fabrication technologies continue to be made, MEMS designs can become more complex, thus opening the door to an even broader set of MEMS applications. In an effort to further research and development in MEMS design, fabrication, and application, Sandia National Laboratories has launched the Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program or SAMPLES program. The SAMPLES program offers potential partners interested in MEMS the opportunity to prototype an idea and produce hardware that can be used to sell a concept. The SAMPLES program provides education and training on Sandia`s design tools, analysis tools and fabrication process. New designers can participate in the SAMPLES program and design MEMS devices using Sandia`s design and analysis tools. As part of the SAMPLES program, participants` designs are fabricated using Sandia`s 4 level polycrystalline silicon surface micromachine technology fabrication process known as SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology). Furthermore, SAMPLES participants can also opt to obtain state of the art, post-fabrication services provided at Sandia such as release, packaging, reliability characterization, and failure analysis. This paper discusses the components of the SAMPLES program.

Adopting De Novo Programming Approach on IC Design Service Firms Resources Integration

Directory of Open Access Journals (Sweden)

James K. C. Chen

2014-01-01

Full Text Available The semiconductor industry has very important position in computer industry, ICT field, and new electronic technology developing. The IC design service is one of key factor of semiconductor industry development. There are more than 365 IC design service firms have been established around Hsinchu Science Park in Taiwan. Building an efficient planning model for IC design service firm resources integrating is very interest issue. This study aims to construct a planning model for IC design service firm implementation resources integration. This study uses the De Novo programming as an approach of criteria alternative to achieve optimal resource allocation on IC design firm. Results show the IC design service firm should conduct open innovation concept and utilizes design outsourcing obtains cost down and enhance IC design service business performance. This plan model of De Novo programming is not only for IC design service firm and also can apply to the other industrial implementation strategic alliance/integrating resource. This plan model is a universal model for the others industries field.

Windows Calorimeter Control (WinCal) program computer software design description

International Nuclear Information System (INIS)

Pertzborn, N.F.

1997-01-01

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

DUSEL-related Science at LBNL Program and Opportunities

International Nuclear Information System (INIS)

Bauer, Christian; Detweiler, Jason; Freedman, Stuart; Gilchriese, Murdock; Kadel, Richard; Koch, Volker; Kolomensky, Yury; Lesko, Kevin; von der Lippe, Henrik; Marks, Steve; Nomura, Yasunori; Plate, David; Roe, Natalie; Sichtermann, Ernst; Ligeti, Zoltan

2009-01-01

The National Science Foundation is advancing the design of a Deep Underground Science and Engineering Laboratory (DUSEL) at the former Homestake mine in South Dakota. UC Berkeley and LBNL are leading the design effort for the facility and coordinating the definition and integration of the suite of experiments to be coupled to the facility design in the creation of an MREFC (Major Research Equipment and Facility Construction) proposal. The State of South Dakota has marshaled $120M to prepare the site and begin a modest science program at the 4850 ft level. The first physics experiment is anticipated to begin installation in 2009. The current timetable calls for the MREFC Preliminary Design to be assembled by 2010 to be presented to the National Science Board in 2011. This, in turn, indicates that the earliest DUSEL construction start would be FY2013. The MREFC is estimated (before the inclusion of the long baseline neutrino components) at $500--600M, roughly divided evenly between the experimental program and support for the facility. Construction was estimated at 6--8 years. The DOE and NSF are establishing a Joint Oversight Group (JOG) to coordinate the experimental programs and participation in DUSEL. It is anticipated that the JOG would mirror the similar function for the NSF and DOE participation in the LHC, and that DOE-HEP, DOE-NP, and NSF will all participate in the JOG. In parallel with the NSF efforts, DOE-HEP plans to develop a long baseline neutrino program with neutrino beams created at FNAL and aimed at DUSEL. In the P5 report the focus of the program is to pursue CP violation in the lepton sector. The same detectors can also be used for nucleon decay experiments. DOE has indicated that FNAL would be the ''lead lab'' for the long baseline neutrino program and be charged with designing and implementing the neutrino beamline. BNL is to be charged with designing and implementing the detector. The P5 report also emphasizes the importance of dark matter and

A comparison of three different ray trace programs for x-ray and infrared synchrotron beamline designs

International Nuclear Information System (INIS)

Irick, S.C.; Jung, C.R.

1997-07-01

There are a number of ray trace programs currently used for the design of synchrotron beamlines. While several of these programs have been written and used mostly within the programmer''s institution, many have also been available to the general public. This paper discusses three such programs. One is a commercial product oriented for the general optical designer (not specifically for synchrotron beamlines). One is designed for synchrotron beamlines and is free with restricted availability. Finally, one is designed for synchrotron beamlines and is used primarily in one institution. The wealth of information from general optical materials and components catalogs is readily available in the commercial program for general optical designs. This makes the design of an infrared beamline easier from the standpoint of component selection. However, this program is not easily configured for synchrotron beamline designs, particularly for a bending magnet source. The synchrotron ray trace programs offer a variety of sources, but generally are not as easy to use from the standpoint of the user interface. This paper shows ray traces of the same beamline Optikwerks, SHADOW, and RAY, and compares the results

Development of structure design program for venturi scrubber working at self-priming mode

International Nuclear Information System (INIS)

Wang Meng; Sun Zhongning; Gu Haifeng

2012-01-01

A structure design program was developed for Venturi scrubber working at the self-priming mode. This program proposed a complete logic for thermal parameters calculation and structure design of the throat. A revised calculation for resistance relationship was carried out based on experimental study. The relative error between revised results and experimental values is within 8.6%. (authors)

Climate Literacy and Cyberlearning: Emerging Platforms and Programs

Science.gov (United States)

McCaffrey, M. S.; Wise, S. B.; Buhr, S. M.

2009-12-01

With the release of the Essential Principles of Climate Science Literacy: A Guide for Individuals and Communities in the Spring of 2009, an important step toward an shared educational and communication framework about climate science was achieved. Designed as a living document, reviewed and endorsed by the thirteen federal agencies in the U.S. Climate Change Science Program (now U.S. Global Change Research Program), the Essential Principles of Climate Literacy complement other Earth system literacy efforts. A variety of emerging efforts have begun to build on the framework using a variety of cyberlearning tools, including an online Climate Literacy course developed by Education and Outreach group at CIRES, the Cooperative Institute for Research in Environmental Sciences, and the Independent Learning program of the Continuing Education Division at the University of Colorado at Boulder. The online course, piloted during the Summer of 2009 with formal classroom teachers and informal science educators, made use of the online Climate Literacy Handbook, which was developed by CIRES Education and Outreach and the Encyclopedia of Earth, which is supported by the National Council for Science and the Environment and hosted by Boston University. This paper will explore challenges and opportunities in the use of cyberlearning tools to support climate literacy efforts, highlight the development of the online course and handbook, and note related emerging cyberlearning platforms and programs for climate literacy, including related efforts by the Climate Literacy Network, the NASA Global Climate Change Education programs, the National STEM Education Distributed Learning (NSDL) and AAAS Project 2061.

Superconducting Technology Program: Sandia 1993 annual report

International Nuclear Information System (INIS)

Roth, E.P.

1994-05-01

Sandia's STP program is a four-part high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, thallium-based HTS film development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The four research efforts currently underway are: (1) process research on the material synthesis of high-temperature superconductors; (2) investigation of the synthesis and processing of thallium-based high-temperature superconducting thick films; (3) process development and characterization of high-temperature superconducting wire and tape, and (4) cryogenic design of a high-temperature superconducting motor. This report outlines the research that has been performed during FY93 in each of these four areas. A brief background of each project is included to provide historical context and perspective. Major areas of research are described, although no attempt has been made to exhaustively include all work performed in each of these areas

Sustainability Efforts of One Oil Company in Niger Delta of Nigeria

Science.gov (United States)

Anosike, Charles Afam

Environmental degradation and socioeconomic dilemma continue to stigmatize oil production in the Niger Delta of Nigeria. Sustainability programs of oil companies often determine the improvement of living conditions in the region. This explanatory qualitative case study, guided by systems thinking theory and sustainable value framework, explored practitioners' perceptions of sustainability programs to identify its impact on business and the host communities. The research question was designed to address how sustainability efforts of a single oil company in the Niger Delta contributed to the business performance and the livelihood of the local people. Research data were gathered from a sample of 20 experienced sustainability practitioners of the oil company, partnering nonprofit organizations, and community leaders through face-to-face semistructured interviews. Data were segmented and categorized. The data analysis process revealed several themes regarding the challenges and shortfalls of sustainability programs in the region. The oil company's understanding of sustainability as programs and projects focused on preserving resources for future generations was not evident in practice. Findings from the study suggested the need for improved inclusiveness of people in driving sustainability projects. Inclusive sustainability should enhance the oil company's contemplation mechanism to ensure eco-saving thinking and processes, which could result in improved quality of life and business performance in the region. The research findings underscore the need for oil multinational corporations (MNCs) to use a business lens in viewing sustainability to achieve sustainable value.

Computer Program for Analysis, Design and Optimization of Propulsion, Dynamics, and Kinematics of Multistage Rockets

Science.gov (United States)

Lali, Mehdi

2009-03-01

A comprehensive computer program is designed in MATLAB to analyze, design and optimize the propulsion, dynamics, thermodynamics, and kinematics of any serial multi-staging rocket for a set of given data. The program is quite user-friendly. It comprises two main sections: "analysis and design" and "optimization." Each section has a GUI (Graphical User Interface) in which the rocket's data are entered by the user and by which the program is run. The first section analyzes the performance of the rocket that is previously devised by the user. Numerous plots and subplots are provided to display the performance of the rocket. The second section of the program finds the "optimum trajectory" via billions of iterations and computations which are done through sophisticated algorithms using numerical methods and incremental integrations. Innovative techniques are applied to calculate the optimal parameters for the engine and designing the "optimal pitch program." This computer program is stand-alone in such a way that it calculates almost every design parameter in regards to rocket propulsion and dynamics. It is meant to be used for actual launch operations as well as educational and research purposes.

Japanese studies on sodium fires, design and testing

International Nuclear Information System (INIS)

Mitsutsuka, N.; Yoshida, N.

1983-01-01

Considerations of sodium fires are very important for the design and licensing of LMFBRs. Continuing effort has been made in the study of sodium fires and their consequences since the beginning of the Japanese fast breeder reactor development program. Recent effort is mainly focussed on studies related to Monju, especially on the design and testing of primary cell liners against large sodium spills. Experimental and analytical studies on sodium fires, water release from concrete and sodium concrete reactions are conducted as a part of this study. Some extinguishing agents are also tested against sodium fires. In addition, considerable effort is being made in the development of detection systems for the small sodium leaks before a pipe rupture. This paper briefly summarizes the Japanese status of these sodium fire related activities conducted by Fast Breeder Reactor Development Project of the Power Reactor and Nuclear Fuel Development Corporation (PNC)

POBE: A Computer Program for Optimal Design of Multi-Subject Blocked fMRI Experiments

Directory of Open Access Journals (Sweden)

Bärbel Maus

2014-01-01

Full Text Available For functional magnetic resonance imaging (fMRI studies, researchers can use multi-subject blocked designs to identify active brain regions for a certain stimulus type of interest. Before performing such an experiment, careful planning is necessary to obtain efficient stimulus effect estimators within the available financial resources. The optimal number of subjects and the optimal scanning time for a multi-subject blocked design with fixed experimental costs can be determined using optimal design methods. In this paper, the user-friendly computer program POBE 1.2 (program for optimal design of blocked experiments, version 1.2 is presented. POBE provides a graphical user interface for fMRI researchers to easily and efficiently design their experiments. The computer program POBE calculates the optimal number of subjects and the optimal scanning time for user specified experimental factors and model parameters so that the statistical efficiency is maximised for a given study budget. POBE can also be used to determine the minimum budget for a given power. Furthermore, a maximin design can be determined as efficient design for a possible range of values for the unknown model parameters. In this paper, the computer program is described and illustrated with typical experimental factors for a blocked fMRI experiment.

Anticipating cognitive effort: roles of perceived error-likelihood and time demands.

Science.gov (United States)

Dunn, Timothy L; Inzlicht, Michael; Risko, Evan F

2017-11-13

Why are some actions evaluated as effortful? In the present set of experiments we address this question by examining individuals' perception of effort when faced with a trade-off between two putative cognitive costs: how much time a task takes vs. how error-prone it is. Specifically, we were interested in whether individuals anticipate engaging in a small amount of hard work (i.e., low time requirement, but high error-likelihood) vs. a large amount of easy work (i.e., high time requirement, but low error-likelihood) as being more effortful. In between-subject designs, Experiments 1 through 3 demonstrated that individuals anticipate options that are high in perceived error-likelihood (yet less time consuming) as more effortful than options that are perceived to be more time consuming (yet low in error-likelihood). Further, when asked to evaluate which of the two tasks was (a) more effortful, (b) more error-prone, and (c) more time consuming, effort-based and error-based choices closely tracked one another, but this was not the case for time-based choices. Utilizing a within-subject design, Experiment 4 demonstrated overall similar pattern of judgments as Experiments 1 through 3. However, both judgments of error-likelihood and time demand similarly predicted effort judgments. Results are discussed within the context of extant accounts of cognitive control, with considerations of how error-likelihood and time demands may independently and conjunctively factor into judgments of cognitive effort.

Near-term electric vehicle program: Phase I, final report

Energy Technology Data Exchange (ETDEWEB)

Rowlett, B. H.; Murry, R.

1977-08-01

A final report is given for an Energy Research and Development Administration effort aimed at a preliminary design of an energy-efficient electric commuter car. An electric-powered passenger vehicle using a regenerative power system was designed to meet the near-term ERDA electric automobile goals. The program objectives were to (1) study the parameters that affect vehicle performance, range, and cost; (2) design an entirely new electric vehicle that meets performance and economic requirements; and (3) define a program to develop this vehicle design for production in the early 1980's. The design and performance features of the preliminary (baseline) electric-powered passenger vehicle design are described, including the baseline power system, system performance, economic analysis, reliability and safety, alternate designs and options, development plan, and conclusions and recommendations. All aspects of the baseline design were defined in sufficient detail to verify performance expectations and system feasibility.

Designing and Realization of an Individual Educational Program

Science.gov (United States)

Yunusova, Gulnaz R.; Karunas, Ekaterina V.

2016-01-01

Relevance of the issue is caused by the change of a knowledge-oriented educational paradigm into an individual-oriented one. This change means that an individual is the most significant value in the modern process of teaching. The aim of the article is to find a theoretical proof for an individual study program design and test it in pedagogical…

EPRI steam generator programs

International Nuclear Information System (INIS)

Martel, L.J.; Passell, T.O.; Bryant, P.E.C.; Rentler, R.M.

1977-01-01

The paper describes the current overall EPRI steam generator program plan and some of the ongoing projects. Because of the recent occurrence of a corrosion phenomenon called ''denting,'' which has affected a number of operating utilities, an expanded program plan is being developed which addresses the broad and urgent needs required to achieve improved steam generator reliability. The goal of improved steam generator reliability will require advances in various technologies and also a management philosophy that encourages conscientious efforts to apply the improved technologies to the design, procurement, and operation of plant systems and components that affect the full life reliability of steam generators

The promise and challenge of practice-research collaborations: Guiding principles and strategies for initiating, designing, and implementing program evaluation research.

Science.gov (United States)

Secret, Mary; Abell, Melissa L; Berlin, Trey

2011-01-01

The authors present a set of guiding principles and strategies to facilitate the collaborative efforts of social work researchers and practitioners as they initiate, design, and implement outcome evaluations of human service interventions and programs. Beginning with an exploration of the interpersonal barriers to practice-research collaborations, and building on their experiences in successfully completing a community-based research evaluation, the authors identify specific relationship-focused principles and strategies and illustrate how these approaches can guide practice-research teams through the various sequential activities of the evaluation research process. In particular, it is suggested that practice-research collaborations can be formed, strengthened, and sustained by emphasis on a spirit of discovery and shared leadership at the start of the relationship, use of a comprehensive evaluation model to clarify and frame the evaluation and program goals, beginning where the client is when selecting research methodology and measurement tools, commitment to keeping the program first and recording everything during the implementation and data-collection stages, discussion of emerging findings and presentation of findings in graphic format at the data-analysis stage, and a total team approach at the dissemination stage.

New generation of space capabilities resulting from US/RF cooperative efforts

Science.gov (United States)

Humpherys, Thomas; Misnik, Victor; Sinelshchikov, Valery; Stair, A. T., Jr.; Khatulev, Valery; Carpenter, Jack; Watson, John; Chvanov, Dmitry; Privalsky, Victor

2006-09-01

Previous successful international cooperative efforts offer a wealth of experience in dealing with highly sensitive issues, but cooperative remote sensing for monitoring and understanding the global environmental is in the national interest of all countries. Cooperation between international partners is paramount, particularly with the Russian Federation, due to its technological maturity and strategic political and geographical position in the world. Based on experience gained over a decade of collaborative space research efforts, continued cooperation provides an achievable goal as well as understanding the fabric of our coexistence. Past cooperative space research efforts demonstrate the ability of the US and Russian Federation to develop a framework for cooperation, working together on a complex, state-of-the-art joint satellite program. These efforts consisted of teams of scientists and engineers who overcame numerous cultural, linguistic, engineering approaches and different political environments. Among these major achievements are: (1) field measurement activities with US satellites MSTI and MSX and the Russian RESURS-1 satellite, as well as the joint experimental use of the US FISTA aircraft; (2) successful joint Science, Conceptual and Preliminary Design Reviews; (3) joint publications of scientific research technical papers, (4) Russian investment in development, demonstration and operation of the Monitor-E spacecraft (Yacht satellite bus), (5) successful demonstration of the conversion of the SS-19 into a satellite launch system, and (6) negotiation of contractual and technical assistant agreements. This paper discusses a new generation of science and space capabilities available to the Remote Sensing community. Specific topics include: joint requirements definition process and work allocation for hardware and responsibility for software development; the function, description and status of Russian contributions in providing space component prototypes

DARPA-funded efforts in the development of novel brain-computer interface technologies.

Science.gov (United States)

Miranda, Robbin A; Casebeer, William D; Hein, Amy M; Judy, Jack W; Krotkov, Eric P; Laabs, Tracy L; Manzo, Justin E; Pankratz, Kent G; Pratt, Gill A; Sanchez, Justin C; Weber, Douglas J; Wheeler, Tracey L; Ling, Geoffrey S F

2015-04-15

The Defense Advanced Research Projects Agency (DARPA) has funded innovative scientific research and technology developments in the field of brain-computer interfaces (BCI) since the 1970s. This review highlights some of DARPA's major advances in the field of BCI, particularly those made in recent years. Two broad categories of DARPA programs are presented with respect to the ultimate goals of supporting the nation's warfighters: (1) BCI efforts aimed at restoring neural and/or behavioral function, and (2) BCI efforts aimed at improving human training and performance. The programs discussed are synergistic and complementary to one another, and, moreover, promote interdisciplinary collaborations among researchers, engineers, and clinicians. Finally, this review includes a summary of some of the remaining challenges for the field of BCI, as well as the goals of new DARPA efforts in this domain. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Global floor planning approach for VLSI design

International Nuclear Information System (INIS)

LaPotin, D.P.

1986-01-01

Within a hierarchical design environment, initial decisions regarding the partitioning and choice of module attributes greatly impact the quality of the resulting IC in terms of area and electrical performance. This dissertation presents a global floor-planning approach which allows designers to quickly explore layout issues during the initial stages of the IC design process. In contrast to previous efforts, which address the floor-planning problem from a strict module placement point of view, this approach considers floor-planning from an area planning point of view. The approach is based upon a combined min-cut and slicing paradigm, which ensures routability. To provide flexibility, modules may be specified as having a number of possible dimensions and orientations, and I/O pads as well as layout constraints are considered. A slicing-tree representation is employed, upon which a sequence of traversal operations are applied in order to obtain an area efficient layout. An in-place partitioning technique, which provides an improvement over previous min-cut and slicing-based efforts, is discussed. Global routing and module I/O pin assignment are provided for floor-plan evaluation purposes. A computer program, called Mason, has been developed which efficiently implements the approach and provides an interactive environment for designers to perform floor-planning. Performance of this program is illustrated via several industrial examples

Automated design and optimization of flexible booster autopilots via linear programming, volume 1

Science.gov (United States)

Hauser, F. D.

1972-01-01

A nonlinear programming technique was developed for the automated design and optimization of autopilots for large flexible launch vehicles. This technique, which resulted in the COEBRA program, uses the iterative application of linear programming. The method deals directly with the three main requirements of booster autopilot design: to provide (1) good response to guidance commands; (2) response to external disturbances (e.g. wind) to minimize structural bending moment loads and trajectory dispersions; and (3) stability with specified tolerances on the vehicle and flight control system parameters. The method is applicable to very high order systems (30th and greater per flight condition). Examples are provided that demonstrate the successful application of the employed algorithm to the design of autopilots for both single and multiple flight conditions.

Program management plan for development, demonstration, testing, and evaluation efforts associated with Oak Ridge Reservation's Land Disposal Restrictions Federal Facility Compliance Agreement

International Nuclear Information System (INIS)

Conley, T.B.

1994-04-01

This program management plan covers the development, demonstration, testing, and evaluation efforts necessary to identify treatment methods for all the waste listed in Appendix B of the ORR's LDR/FFCA as well as any new wastes which meet Appendix B criteria. To successfully identify a treatment method, at least a proof-of-principle level of understanding must be obtained: that is, the candidate processes must be demonstrated as effective in treating the wastes to the LDR; however, an optimized process is not required. Where applicable and deemed necessary and where the budgets will support them, pilot-scale demonstrations will be pursued. The overall strategy being adopted in this program will be composed of the following activities: Scoping of the study; characterization; development and screening of alternatives; treatability investigations; and detailed analysis of alternatives

Designing building energy efficiency programs for greenhouse gas reductions

International Nuclear Information System (INIS)

Blackhurst, Michael; Lima Azevedo, Ines; Scott Matthews, H.; Hendrickson, Chris T.

2011-01-01

Costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. The analysis includes electricity and natural gas consumption, covering 75% of building energy consumption in Pittsburgh and 85% in Austin. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings, and GHG reductions. Results suggest uncertainty in local stocks, demands, and efficiency significantly impacts anticipated outcomes. Annual GHG reductions of 1 ton CO 2 eq/capita/yr in Pittsburgh could cost near nothing or over $20 per capita annually. Capital-constrained policies generate slightly less social savings (a present value of a few hundred dollars per capita) than policies that maximize social savings. However, sectors and end uses targeted for intervention vary depending on policy objectives and constraints. Optimal efficiency investment strategies for some end uses vary significantly (in excess of 100%) between Pittsburgh and Austin, suggesting that resources and guidance conducted at the national scale may mislead state and local decision-makers. Results are used to provide recommendations for efficiency program administrators. - Highlights: → We use public data to estimate local building energy costs, benefits and greenhouse gas reductions. → We use optimization to evaluate trade-offs between program objectives and capital constraints. → Local energy market conditions significantly influence efficiency expectations. → Different program objectives can lead to different effective investment strategies. → We reflect on the implications of our results for efficiency program design.

Designing building energy efficiency programs for greenhouse gas reductions

Energy Technology Data Exchange (ETDEWEB)

Blackhurst, Michael, E-mail: mfb@andrew.cmu.edu [Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin, 1 University Station C1752, Austin, TX 78712 (United States); Lima Azevedo, Ines, E-mail: iazevedo@cmu.edu [Department of Engineering and Public Policy, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Scott Matthews, H., E-mail: hsm@cmu.edu [Department of Engineering and Public Policy, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Department of Civil and Environmental Engineering, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Hendrickson, Chris T., E-mail: cth@andrew.cmu.edu [Department of Civil and Environmental Engineering, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States)

2011-09-15

Costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. The analysis includes electricity and natural gas consumption, covering 75% of building energy consumption in Pittsburgh and 85% in Austin. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings, and GHG reductions. Results suggest uncertainty in local stocks, demands, and efficiency significantly impacts anticipated outcomes. Annual GHG reductions of 1 ton CO{sub 2} eq/capita/yr in Pittsburgh could cost near nothing or over $20 per capita annually. Capital-constrained policies generate slightly less social savings (a present value of a few hundred dollars per capita) than policies that maximize social savings. However, sectors and end uses targeted for intervention vary depending on policy objectives and constraints. Optimal efficiency investment strategies for some end uses vary significantly (in excess of 100%) between Pittsburgh and Austin, suggesting that resources and guidance conducted at the national scale may mislead state and local decision-makers. Results are used to provide recommendations for efficiency program administrators. - Highlights: > We use public data to estimate local building energy costs, benefits and greenhouse gas reductions. > We use optimization to evaluate trade-offs between program objectives and capital constraints. > Local energy market conditions significantly influence efficiency expectations. > Different program objectives can lead to different effective investment strategies. > We reflect on the implications of our results for efficiency program design.

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

Science.gov (United States)

2005-01-01

The purpose of grant NCC3-966 was to investigate and evaluate the interchange of application-specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

Thermal hydraulics and mechanics core design programs

International Nuclear Information System (INIS)

Heinecke, J.

1992-10-01

The report documents the work performed within the Research and Development Task T hermal hydraulics and mechanics core design programs , funded by the German government. It contains the development of new codes, the extension of existing codes, the qualification and verification of codes and the development of a code library. The overall goal of this work was to adapt the system of thermal hydraulics and mechanics codes to the permanently growing requirements of the status of science and technology

Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

Science.gov (United States)

Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

2015-01-01

The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

TAP 1, Training Program Manual

International Nuclear Information System (INIS)

1991-01-01

Training programs at DOE nuclear facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

TRU Waste Management Program. Cost/schedule optimization analysis

International Nuclear Information System (INIS)

Detamore, J.A.; Raudenbush, M.H.; Wolaver, R.W.; Hastings, G.A.

1985-10-01

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office Rockwell International (JIO/RI) during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, task monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short-term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. Systems models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions

Advancing Care Within an Adult Mental Health Day Hospital: Program Re-Design and Evaluation.

Science.gov (United States)

Taube-Schiff, Marlene; Mehak, Adrienne; Marangos, Sandy; Kalim, Anastasia; Ungar, Thomas

2017-11-13

Day hospital mental health programs provide alternate care to individuals of high acuity that do not require an inpatient psychiatric stay. Ensuring provision of best practice within these programs is essential for patient stabilization and recovery. However, there is scant literature to review when creating such a program. This paper provides an overview of the steps an acute care hospital took when designing and implementing new programming within a day hospital program. Qualitative data was collected following initial program rollout. This data helped to inform the ongoing modification of groups offered, group scheduling and content, as well as ensuring patient satisfaction and adequate skill delivery during the rollout period and beyond. The goal of this paper is to inform health service delivery for other programs when attempting to build or re-design a day hospital program.

NRC review of passive reactor design certification testing programs: Overview and regulatory perspective

International Nuclear Information System (INIS)

Levin, A.E.

1993-01-01

Reactor vendors are developing new designs for future deployment, including open-quotes passiveclose quotes light water reactors (LWRs), such as General Electric's (G.E.'s) simplified boiling water reactor (SBWR) and Westinghouse's AP600, which depend primarily on inherent processes, such as national convection and gravity feed, for safety injection and emergency core cooling. The U.S. Nuclear Regulatory Commission (NRC) has implemented a new process, certification of standardized reactor designs, for licensing these Plants. Part 52 of Title 10 of the Code of Federal Regulations (10CFR52) contains the requirements that vendors must meet for design certification. One important section, 10CFR52.47, reads open-quotes Certification of a standard design which . . . utilizes simplified, inherent, passive, or other innovative means to accomplish its safety functions will be granted only if: (1) The performance of each safety feature of the design has been demonstrated through either analysis, appropriate test programs, experience, or a combination thereof; (2) Interdependent effects among the safety features have been found acceptable by analysis, appropriate test programs, experience, or a combination thereof; and (3) Sufficient data exist on the safety features of the design to assess the analytical tools used for safety analyses. . . . The vendors have initiated programs to test innovative features of their designs and to develop data bases needed to validate their analytical codes, as required by the design certification rule. Accordingly, the NRC is reviewing and evaluating the vendors programs to ensure that they address adequately key issues concerning safety system performance. This paper provides an overview of the NRC's review process and regulatory perspective

MOD-5A wind turbine generator program design report: Volume 1: Executive Summary

Science.gov (United States)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work performed between July 1980 and June 1984 is discussed. The report is divided into four volumes: Volume 1 summarizes the entire MOD-5A program, Volume 2 discusses the conceptual and preliminary design phases, Volume 3 describes the final design of the MOD-5A, and Volume 4 contains the drawings and specifications developed for the final design. Volume 1, the Executive Summary, summarizes all phases of the MOD-5A program. The performance and cost of energy generated by the MOD-5A are presented. Each subsystem - the rotor, drivetrain, nacelle, tower and foundation, power generation, and control and instrumentation subsystems - is described briefly. The early phases of the MOD-5A program, during which the design was analyzed and optimized, and new technologies and materials were developed, are discussed. Manufacturing, quality assurance, and safety plans are presented. The volume concludes with an index of volumes 2 and 3.

Development of a solar-powered residential air conditioner. Program review

Science.gov (United States)

1975-01-01

Progress in the effort to develop a residential solar-powered air conditioning system is reported. The topics covered include the objectives, scope and status of the program. The results of state-of-art, design, and economic studies and component and system data are also presented.

Climate Change Adaptation in Africa Program : 2009-10 in brief

International Development Research Centre (IDRC) Digital Library (Canada)

CCAA

adaptation efforts should be grounded in scientific knowledge, and integrated into policy and development ... methodology and designing strategies to inform policies has ensured that policymakers were engaged ... in 2006, the CCAA research and capacity building program works on the premise that Africans themselves ...

Student Recruitment and Retention Efforts in PETE: Cloudy Skies or Silver Linings

Science.gov (United States)

Bulger, Sean M.; Braga, Luciana; DiGiacinto, Kacey; Jones, Emily M.

2016-01-01

This article addresses current issues and trends related to teacher candidate recruitment in physical education teacher education programs. It highlights the efforts of program leaders in three different higher education institutions to recruit and retain well-qualified physical education majors. The key lessons learned from these cases serve as a…

A NEW EXHAUST VENTILATION SYSTEM DESIGN SOFTWARE

Directory of Open Access Journals (Sweden)

H. Asilian Mahabady

2007-09-01

Full Text Available A Microsoft Windows based ventilation software package is developed to reduce time-consuming and boring procedure of exhaust ventilation system design. This program Assure accurate and reliable air pollution control related calculations. Herein, package is tentatively named Exhaust Ventilation Design Software which is developed in VB6 programming environment. Most important features of Exhaust Ventilation Design Software that are ignored in formerly developed packages are Collector design and fan dimension data calculations. Automatic system balance is another feature of this package. Exhaust Ventilation Design Software algorithm for design is based on two methods: Balance by design (Static pressure balance and design by Blast gate. The most important section of software is a spreadsheet that is designed based on American Conference of Governmental Industrial Hygienists calculation sheets. Exhaust Ventilation Design Software is developed so that engineers familiar with American Conference of Governmental Industrial Hygienists datasheet can easily employ it for ventilation systems design. Other sections include Collector design section (settling chamber, cyclone, and packed tower, fan geometry and dimension data section, a unit converter section (that helps engineers to deal with units, a hood design section and a Persian HTML help. Psychometric correction is also considered in Exhaust Ventilation Design Software. In Exhaust Ventilation Design Software design process, efforts are focused on improving GUI (graphical user interface and use of programming standards in software design. Reliability of software has been evaluated and results show acceptable accuracy.

Generic Mathematical Programming Formulation and Solution for Computer-Aided Molecular Design

DEFF Research Database (Denmark)

Zhang, Lei; Cignitti, Stefano; Gani, Rafiqul

2015-01-01

This short communication presents a generic mathematical programming formulation for Computer-Aided Molecular Design (CAMD). A given CAMD problem, based on target properties, is formulated as a Mixed Integer Linear/Non-Linear Program (MILP/MINLP). The mathematical programming model presented here......, which is formulated as an MILP/MINLP problem, considers first-order and second-order molecular groups for molecular structure representation and property estimation. It is shown that various CAMD problems can be formulated and solved through this model....

Fundamental Drop Dynamics and Mass Transfer Experiments to Support Solvent Extraction Modeling Efforts

International Nuclear Information System (INIS)

Christensen, Kristi; Rutledge, Veronica; Garn, Troy

2011-01-01

In support of the Nuclear Energy Advanced Modeling Simulation Safeguards and Separations (NEAMS SafeSep) program, the Idaho National Laboratory (INL) worked in collaboration with Los Alamos National Laboratory (LANL) to further a modeling effort designed to predict mass transfer behavior for selected metal species between individual dispersed drops and a continuous phase in a two phase liquid-liquid extraction (LLE) system. The purpose of the model is to understand the fundamental processes of mass transfer that occur at the drop interface. This fundamental understanding can be extended to support modeling of larger LLE equipment such as mixer settlers, pulse columns, and centrifugal contactors. The work performed at the INL involved gathering the necessary experimental data to support the modeling effort. A custom experimental apparatus was designed and built for performing drop contact experiments to measure mass transfer coefficients as a function of contact time. A high speed digital camera was used in conjunction with the apparatus to measure size, shape, and velocity of the drops. In addition to drop data, the physical properties of the experimental fluids were measured to be used as input data for the model. Physical properties measurements included density, viscosity, surface tension and interfacial tension. Additionally, self diffusion coefficients for the selected metal species in each experimental solution were measured, and the distribution coefficient for the metal partitioning between phases was determined. At the completion of this work, the INL has determined the mass transfer coefficient and a velocity profile for drops rising by buoyancy through a continuous medium under a specific set of experimental conditions. Additionally, a complete set of experimentally determined fluid properties has been obtained. All data will be provided to LANL to support the modeling effort.

A SUMMARY COMPARISON OF DESIGN EVALUATION TECHNIQUES

Energy Technology Data Exchange (ETDEWEB)

Spielman, Zachary; Hill, Rachael

2017-06-01

The United States’ fleet of Nuclear Reactors is considering modernizing their control rooms and instrumentation as an effort to avoid component obsolescence, keep up with competing industries, and cater to a new work force among others. Multiple technologies have potential to improve the control room. In attempts to evaluate the available options researchers employ a variety of measures to ensure the best candidate is used in a modernizing effort. The NRC is in charge of ensuring any new design has been thoroughly vetted before approving a license. Laid out in NUREG-0711 “Human Factors Engineering Program Review Model” is the review criteria for design validation. As there are a variety of measures currently used to evaluate candidate technologies, this paper seeks to identify weaknesses in the common measures used to design and validate technology in control room modernization efforts. Identifying where measurements are not meeting the criteria will help the control room modernization research platform identify where measurement development needs to occur. This will help ensure that current performance measurements are producing as reliable results as possible to select the right technology to integrate into nuclear operating control rooms.

Effort - Final technical report on task 3

DEFF Research Database (Denmark)

Bay, Niels; Henningsen, Poul; Eriksen, Morten

The present report is documentation for the work carried out at DTU on the Brite/Euram project No. BE96-3340, contract No. BRPR-CT97-0398, with the title Enhanced Framework for forging design using reliable three-dimensional simulation (EFFORTS). The objective of task 3 is to determine data...

Competing probabilistic models for catch-effort relationships in wildlife censuses

Energy Technology Data Exchange (ETDEWEB)

Skalski, J.R.; Robson, D.S.; Matsuzaki, C.L.

1983-01-01

Two probabilistic models are presented for describing the chance that an animal is captured during a wildlife census, as a function of trapping effort. The models in turn are used to propose relationships between sampling intensity and catch-per-unit-effort (C.P.U.E.) that were field tested on small mammal populations. Capture data suggests a model of diminshing C.P.U.E. with increasing levels of trapping intensity. The catch-effort model is used to illustrate optimization procedures in the design of mark-recapture experiments for censusing wild populations. 14 references, 2 tables.

NRC review of passive reactor design certification testing programs: Overview, progress, and regulatory perspective

Energy Technology Data Exchange (ETDEWEB)

Levin, A.E.

1995-09-01

New reactor designs, employing passive safety systems, are currently under development by reactor vendors for certification under the U.S. Nuclear Regulatory Commission`s (NRC`s) design certification rule. The vendors have established testing programs to support the certification of the passive designs, to meet regulatory requirements for demonstration of passive safety system performance. The NRC has, therefore, developed a process for the review of the vendors` testing programs and for incorporation of the results of those reviews into the safety evaluations for the passive plants. This paper discusses progress in the test program reviews, and also addresses unique regulatory aspects of those reviews.

Improving Outreach and Surveillance Efforts Following a Large-Scale Carbon Monoxide Poisoning in Wisconsin.

Science.gov (United States)

Creswell, Paul D; Vogt, Christy M; Wozniak, Ryan J; Camponeschi, Jenny; Werner, Mark A; Meiman, Jonathan G

In December 2014, the largest carbon monoxide (CO) poisoning in Wisconsin's history occurred at an ice arena. Following this event, the Wisconsin Environmental Public Health Tracking (WI EPHT) Program sought to improve outreach and surveillance efforts. WI EPHT designed and distributed educational materials on CO poisoning prevention and surveyed stakeholders to gauge the effectiveness of outreach efforts. To enhance surveillance, WI EPHT utilized data from the Wisconsin Poison Center (WPC) to generate real-time alerts of anomalous numbers of CO-related calls. WI EPHT found that 42% of stakeholders reviewed the outreach materials, and 1 ice arena had installed a CO detector as a result. CO alerts were developed using WPC data and are now routinely used in statewide public health surveillance. WI EPHT staff improved CO poisoning prevention outreach and saw a positive response among stakeholders. This work demonstrates ways that health agencies can improve outreach and surveillance for CO poisoning. Improvements in these areas can bolster public health response and may prevent CO-related illness and injury.

Building a Communication, Education, an Outreach Program for the ShakeAlert National Earthquake Early Warning Program

Science.gov (United States)

DeGroot, R. M.; Strauss, J. A.; Given, D. D.; Cochran, E. S.; Burkett, E. R.; Long, K.

2016-12-01

Earthquake Early Warning (EEW) systems can provide as much as tens of seconds of warning to people and automated systems before strong shaking arrives. The United States Geological Survey (USGS) and its partners are developing an EEW system for the West Coast of the United States. To be an integral part of successful implementation, EEW engagement programs and materials must integrate with and leverage broader earthquake risk programs. New methods and products for dissemination must be multidisciplinary, cost effective, and consistent with existing hazards education efforts. Our presentation outlines how the USGS and its partners will approach this effort in the context of the EEW system through the work of a multistate and multiagency committee that participates in the design, implementation, and evaluation of a portfolio of programs and products. This committee, referred to as the ShakeAlert Joint Committee for Communication, Education, and Outreach (ShakeAlert CEO), is working to identify, develop, and cultivate partnerships with EEW stakeholders including Federal, State, academic partners, private companies, policy makers, and local organizations. Efforts include developing materials, methods for delivery, and reaching stakeholders with information on EEW, earthquake preparedness, and emergency protective actions. It is essential to develop standards to ensure information communicated via the EEW alerts is consistent across the public and private sector and achieving a common understanding of what actions users take when they receive an EEW warning. The USGS and the participating states and agencies acknowledge that the implementation of EEW is a collective effort requiring the participation of hundreds of stakeholders committed to ensuring public accessibility.

A retraining program for inactive physicians.

Science.gov (United States)

Brown, M; Sakai, F J; Selzer, A

1969-11-01

During the past two years a pilot project was conducted in which 19 inactive physicians were retrained in preparation for resumption of active practice. The initial program consisted of a flexible training program of six months to one year patterned after conventional internship-residency concepts. During the second year the program was modified by providing an initial condensed indoctrination period of two months' duration especially designed for this purpose, followed by a preceptorship type of training. The project was considered successful in permitting trainees to enter some form of active medical work, or to enroll in formal specialty training. The observations made by the faculty of the program and its accomplishments are discussed in the light of the effort expended and the cost of the project.

An approach to the successful design of a minicomputer system for nuclear materials management

International Nuclear Information System (INIS)

Paul, R.N.; Anderson, L.L.

1978-08-01

A development laboratory to study nuclear fuel fabrication techniques is in operation at the Chalk River Nuclear Laboratories (CRNL). To assist operators in the management of nuclear materials in this laboratory, a minicomputer system (INMACS) has been designed and installed. INMACS is implemented on a PDP-11 with a RSTS/E operating system. A data base management package with on-line backup capability has been developed for this application. Fifteen man-years of effort have been spent on designing and building the system. This paper will discuss the philosophy and the design approach followed for the implementation of INMACS. Clear problem definition and careful system design, effective liaison with the users, detailed program specifications, proper co-ordination of the software development effort, and thorough testing of the integrated system, have all contributed to the achievement of the design goals. INMACS has been readily accepted by the users who were previously not conversant with computers. After eight months of operation, no program changes have been necessary and the system has been performing successfully as specified. (author)

ADVANCED TURBINE SYSTEM FEDERAL ASSISTANCE PROGRAM

Energy Technology Data Exchange (ETDEWEB)

Frank Macri

2003-10-01

Rolls-Royce Corporation has completed a cooperative agreement under Department of Energy (DOE) contract DE-FC21-96MC33066 in support of the Advanced Turbine Systems (ATS) program to stimulate industrial power generation markets. This DOE contract was performed during the period of October 1995 to December 2002. This final technical report, which is a program deliverable, describes all associated results obtained during Phases 3A and 3B of the contract. Rolls-Royce Corporation (formerly Allison Engine Company) initially focused on the design and development of a 10-megawatt (MW) high-efficiency industrial gas turbine engine/package concept (termed the 701-K) to meet the specific goals of the ATS program, which included single digit NOx emissions, increased plant efficiency, fuel flexibility, and reduced cost of power (i.e., $/kW). While a detailed design effort and associated component development were successfully accomplished for the 701-K engine, capable of achieving the stated ATS program goals, in 1999 Rolls-Royce changed its focus to developing advanced component technologies for product insertion that would modernize the current fleet of 501-K and 601-K industrial gas turbines. This effort would also help to establish commercial venues for suppliers and designers and assist in involving future advanced technologies in the field of gas turbine engine development. This strategy change was partly driven by the market requirements that suggested a low demand for a 10-MW aeroderivative industrial gas turbine, a change in corporate strategy for aeroderivative gas turbine engine development initiatives, and a consensus that a better return on investment (ROI) could be achieved under the ATS contract by focusing on product improvements and technology insertion for the existing Rolls-Royce small engine industrial gas turbine fleet.

Design features of an automated entry control system

International Nuclear Information System (INIS)

Reynolds, D.A.

1978-01-01

Features of an entry control system designed to automatically control access to nuclear facilities is described. Control independent of variable human factors is stressed, but security force action is required for assessment and response as a result of an alarm. A design based on a distributed processing capability is utilized. Flexibility and generality are emphasized in an effort to maximize applicability to the entry-control problem faced by nuclear facilities upgrading security as a result of the Safeguards Program

Structural health monitoring feature design by genetic programming

International Nuclear Information System (INIS)

Harvey, Dustin Y; Todd, Michael D

2014-01-01

Structural health monitoring (SHM) systems provide real-time damage and performance information for civil, aerospace, and other high-capital or life-safety critical structures. Conventional data processing involves pre-processing and extraction of low-dimensional features from in situ time series measurements. The features are then input to a statistical pattern recognition algorithm to perform the relevant classification or regression task necessary to facilitate decisions by the SHM system. Traditional design of signal processing and feature extraction algorithms can be an expensive and time-consuming process requiring extensive system knowledge and domain expertise. Genetic programming, a heuristic program search method from evolutionary computation, was recently adapted by the authors to perform automated, data-driven design of signal processing and feature extraction algorithms for statistical pattern recognition applications. The proposed method, called Autofead, is particularly suitable to handle the challenges inherent in algorithm design for SHM problems where the manifestation of damage in structural response measurements is often unclear or unknown. Autofead mines a training database of response measurements to discover information-rich features specific to the problem at hand. This study provides experimental validation on three SHM applications including ultrasonic damage detection, bearing damage classification for rotating machinery, and vibration-based structural health monitoring. Performance comparisons with common feature choices for each problem area are provided demonstrating the versatility of Autofead to produce significant algorithm improvements on a wide range of problems. (paper)

Distributed Solar Incentive Programs: Recent Experience and Best Practices for Design and Implementation

Energy Technology Data Exchange (ETDEWEB)

Bird, L.; Reger, A.; Heeter, J.

2012-12-01

Based on lessons from recent program experience, this report explores best practices for designing and implementing incentives for small and mid-sized residential and commercial distributed solar energy projects. The findings of this paper are relevant to both new incentive programs as well as those undergoing modifications. The report covers factors to consider in setting and modifying incentive levels over time, differentiating incentives to encourage various market segments, administrative issues such as providing equitable access to incentives and customer protection. It also explores how incentive programs can be designed to respond to changing market conditions while attempting to provide a longer-term and stable environment for the solar industry. The findings are based on interviews with program administrators, regulators, and industry representatives as well as data from numerous incentive programs nationally, particularly the largest and longest-running programs. These best practices consider the perspectives of various stakeholders and the broad objectives of reducing solar costs, encouraging long-term market viability, minimizing ratepayer costs, and protecting consumers.

Design of a PLC control program for a batch plant : VHS case study 1

NARCIS (Netherlands)

Mader, A.H.; Brinksma, E.; Wupper, H.; Bauer, N.

2001-01-01

This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

Design of a PLC Control Program for a Batch Plant - VHS Case Study 1

NARCIS (Netherlands)

Mader, Angelika H.; Brinksma, Hendrik; Wupper, H.; Bauer, N.

2001-01-01

This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

Mapping telemedicine efforts

DEFF Research Database (Denmark)

Kierkegaard, Patrick

2015-01-01

are being utilized? What medical disciplines are being addressed using telemedicine systems? Methods: All data was surveyed from the "Telemedicinsk Landkort", a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. Results......Objectives: The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies......: The results of this study suggest that a growing number of telemedicine initiatives are currently in operation across Denmark but that considerable variations existed in terms of regional efforts as the number of operational telemedicine projects varied from region to region. Conclusions: The results...

Massachusetts Signing Bonus Program for New Teachers

Directory of Open Access Journals (Sweden)

R. Clarke Fowler

2003-04-01

Full Text Available This article examines the Massachusetts Signing Bonus Program for New Teachers, a nationally prominent program that has recruited and prepared $20,000 bonus recipients to teach after seven weeks' training at the Massachusetts Institute for New Teachers (MINT. Although state officials have trumpeted this initiative as a national model that other states are copying, they announced in November 2002 that they were radically changing it. The changes included halting the state's national recruitment efforts and replacing the seven-week, fast-track training program designed by the New Teacher Project with year-long programs to be designed by three of the state's education schools. Even though the state spent more than $50,000 recruiting individuals from states outside the Northeast over the first four program years, it garnered just seven bonus recipients from the non-Northeast states its recruiters visited, only four of whom were still teaching in Fall 2002. The state did, however, generate a substantial number of applicants in each program year (ranging from 783 to nearly 950, most of whom came from Massachusetts or nearby states. Contrary to state officials' claims, though, it appears that many of these individuals had substantial prior educational experience. Although officials stated that all bonus teachers would go to 13 designated high-need urban districts, the state has never met this commitment, sending fewer bonus teachers to these districts in each of the first three years of the program. The state has lost a high percentage of its bonus teachers to attrition particularly in state-designated, high-need districts. These attrition rates are substantially higher than comparable national rates. Although the state has portrayed the Bonus and MINT programs, combined, as highly successful, officials exaggerated many of the purported positive outcomes. On the positive side, independent survey data (Churchill et al., 2002 indicated that principals

Planning and Implementing a Public Health Professional Distance Learning Program

Science.gov (United States)

Escoffery, Cam; Leppke, Allison M.; Robinson, Kara B.; Mettler, Erik P.; Miner, Kathleen R.; Smith, Iris

2005-01-01

Training of public health professionals through web-based technology is rapidly increasing. This article describes one school of public health's effort to establish an online Master's program that serves students nationally and internationally. It examines the critical components in the design and implementation of distance education, including…

Research, Monitoring, and Evaluation for the Federal Columbia River Estuary Program

Energy Technology Data Exchange (ETDEWEB)

Johnson, Gary E.; Diefenderfer, Heida L.; Ebberts, Blaine D.; Tortorici, Cathy; Yerxa, Tracey; Leary, J.; Skalski, John R.

2008-02-05

The purpose ofthis document is to describe research, monitoring, and evaluation (RME) for the Federal Columbia River Estuary Program. The intent of this RME effort is to provide data and information to evaluate progress toward meeting program goals and objectives and support decision-making in the Estuary Program. The goal of the Estuary Program is to understand, conserve, and restore the estuary ecosystem to improve the performance of listed salmonid populations. The Estuary Program has five general objectives, designed to fulfill the program goal, as follows. 1. Understand the primary stressors affecting ecosystem controlling factors, such as ocean conditions and invasive species. 2. Conserve and restore factors controlling ecosystem structures and processes, such as hydrodynamics and water quality. 3. Increase the quantity and quality of ecosystem structures, i.e., habitats, juvenile salmonids use during migration through the estuary. 4. Maintain the food web to benefit salmonid performance. 5. Improve salmonid performance in terms of life history diversity, foraging success, growth, and survival. The goal of estuary RME is to provide pertinent and timely research and monitoring information to planners, implementers, and managers of the Estuary Program. In conclusion, the estuary RME effort is designed to meet the research and monitoring needs of the estuary Program using an adaptive management process. Estuary RME's success and usefulness will depend on the actual conduct of adaptive management, as embodied in the objectives, implrementation, data, reporting, and synthesis, evaluation, and decision-making described herein.

Lawrence Livermore National Laboratory (LLNL) Waste Minimization Program Plan

International Nuclear Information System (INIS)

Heckman, R.A.; Tang, W.R.

1989-01-01

This Program Plan document describes the background of the Waste Minimization field at Lawrence Livermore National Laboratory (LLNL) and refers to the significant studies that have impacted on legislative efforts, both at the federal and state levels. A short history of formal LLNL waste minimization efforts is provided. Also included are general findings from analysis of work to date, with emphasis on source reduction findings. A short summary is provided on current regulations and probable future legislation which may impact on waste minimization methodology. The LLN Waste Minimization Program Plan is designed to be dynamic and flexible so as to meet current regulations, and yet is able to respond to an everchanging regulatory environment. 19 refs., 12 figs., 8 tabs

Instruction Emphasizing Effort Improves Physics Problem Solving

Science.gov (United States)

Li, Daoquan

2012-01-01

Effectively using strategies to solve complex problems is an important educational goal and is implicated in successful academic performance. However, people often do not spontaneously use the effective strategies unless they are motivated to do so. The present study was designed to test whether educating students about the importance of effort in…

A Hybrid Genetic Programming Algorithm for Automated Design of Dispatching Rules.

Science.gov (United States)

Nguyen, Su; Mei, Yi; Xue, Bing; Zhang, Mengjie

2018-06-04

Designing effective dispatching rules for production systems is a difficult and timeconsuming task if it is done manually. In the last decade, the growth of computing power, advanced machine learning, and optimisation techniques has made the automated design of dispatching rules possible and automatically discovered rules are competitive or outperform existing rules developed by researchers. Genetic programming is one of the most popular approaches to discovering dispatching rules in the literature, especially for complex production systems. However, the large heuristic search space may restrict genetic programming from finding near optimal dispatching rules. This paper develops a new hybrid genetic programming algorithm for dynamic job shop scheduling based on a new representation, a new local search heuristic, and efficient fitness evaluators. Experiments show that the new method is effective regarding the quality of evolved rules. Moreover, evolved rules are also significantly smaller and contain more relevant attributes.

Key developments of the EP1000 design

International Nuclear Information System (INIS)

Noviello, L.

1999-01-01

In 1994, a group of European utilities initiated, together with Westinghouse and its industrial partner GENESI (an Italian consortium including ANSALDO and FIAT), a program designated EPP (European Passive Plant) to evaluate Westinghouse passive nuclear plant technology for application in Europe. The Phase I of the European Passive Plant program involved the evaluation of the Westinghouse 600 MWe AP600 and 1000 MWe Simplified Pressurized Water Reactor (SPWR) designs against the European Utility Requirements (EUR), and when necessary, the investigation of possible modifications to achieve compliance with the EUR. In Phase 1 of the program, which has been completed in 1996, the following major tasks were accomplished: The impacts of the European Utility Requirements (EUR) on the Westinghouse nuclear island design were evaluated. A 1000 MWe passive plant reference design (EP1000) was developed which conforms to the EUR and is expected to be licensable in Europe. With respect to the NSSS and containment, the EP1000 reference design closely follows those of the Westinghouse SPWR design, while the AP600 design has been taken as the basis for the design of the auxiliary systems. Extensive design and testing efforts have been made for the AP600 and SPWR during the respective multi-year programs. While the results of these programs have been and will continue to be utilised, at the maximum extent, to minimise the work to be performed on the EP1000 design, the compliance with EUR is a key design requirement for the EP1000 The ultimate objective of Phase 2 of the program is to develop design details and perform supporting analyses to produce a Safety Case Report (SCR) for submittal to European Safety Authorities. The first part of Phase 2, hereafter referred as Phase 2A, started at the beginning of 1997 and will be completed at the end of 1998. Scope of this phase of the program is to develop the design modifications of important systems and structures so to comply with the

Problem solving and Program design using the TI-92

NARCIS (Netherlands)

Ir.ing. Ton Marée; ir Martijn van Dongen

2000-01-01

This textbook is intended for a basic course in problem solving and program design needed by scientists and engineers using the TI-92. The TI-92 is an extremely powerful problem solving tool that can help you manage complicated problems quickly. We assume no prior knowledge of computers or

Tri-Lateral Noor al Salaam High Concentration Solar Central Receiver Program

Energy Technology Data Exchange (ETDEWEB)

Blackmon, James B

2008-03-31

This report documents the efforts conducted primarily under the Noor al Salaam (“Light of Peace”) program under DOE GRANT NUMBER DE-FC36-02GO12030, together with relevant technical results from a closely related technology development effort, the U.S./Israel Science and Technology Foundation (USISTF) High Concentration Solar Central Receiver program. These efforts involved preliminary design, development, and test of selected prototype power production subsystems and documentation of an initial version of the system definition for a high concentration solar hybrid/gas electrical power plant to be built in Zaafarana, Egypt as a first step in planned commercialization. A major part of the planned work was halted in 2007 with an amendment in October 2007 requiring that we complete the technical effort by December 31, 2007 and provide a final report to DOE within the following 90 days. This document summarizes the work conducted. The USISTF program was a 50/50 cost-shared program supported by the Department of Commerce through the U.S./Israel Science and Technology Commission (USISTC). The USISTC was cooperatively developed by President Clinton and the late Prime Minister Rabin of Israel "to encourage technological collaboration" and "support peace in the Middle East through economic development". The program was conducted as a follow-on effort to Israel's Magnet/CONSOLAR Program, which was an advanced development effort to design, fabricate, and test a solar central receiver and secondary optics for a "beam down" central receiver concept. The status of these hardware development programs is reviewed, since they form the basis for the Noor al Salaam program. Descriptions are provided of the integrated system and the major subsystems, including the heliostat, the high temperature air receiver, the power conversion unit, tower and tower reflector, compound parabolic concentrator, and the master control system. One objective of the USISTF program was to conduct

The Process of Planning and Designing Research for an Educational Telecommunications Effort. Satellite Technology Demonstration, Technical Report No. 0209.

Science.gov (United States)

Connolly, A. J.; And Others

The Satellite Technology Demonstration (STD) designed research for a satellite-based communication system that would transmit educational television programs. Their procedures were subject to a series of external and internal evaluations by the project sponsors, the National Institute of Education. In regard to external evaluation, STD recommended…

Peer Mentor Program for the General Chemistry Laboratory Designed to Improve Undergraduate STEM Retention

Science.gov (United States)

Damkaci, Fehmi; Braun, Timothy F.; Gublo, Kristin

2017-01-01

We describe the design and implementation of an undergraduate peer mentor program that can overlay an existing general chemistry laboratory and is designed to improve STEM student retention. For the first four freshman cohorts going through the program, year-to-year retention improved by a four-year average of 20% for students in peer-mentored…

Design of problem-specific evolutionary algorithm/mixed-integer programming hybrids: two-stage stochastic integer programming applied to chemical batch scheduling

Science.gov (United States)

Urselmann, Maren; Emmerich, Michael T. M.; Till, Jochen; Sand, Guido; Engell, Sebastian

2007-07-01

Engineering optimization often deals with large, mixed-integer search spaces with a rigid structure due to the presence of a large number of constraints. Metaheuristics, such as evolutionary algorithms (EAs), are frequently suggested as solution algorithms in such cases. In order to exploit the full potential of these algorithms, it is important to choose an adequate representation of the search space and to integrate expert-knowledge into the stochastic search operators, without adding unnecessary bias to the search. Moreover, hybridisation with mathematical programming techniques such as mixed-integer programming (MIP) based on a problem decomposition can be considered for improving algorithmic performance. In order to design problem-specific EAs it is desirable to have a set of design guidelines that specify properties of search operators and representations. Recently, a set of guidelines has been proposed that gives rise to so-called Metric-based EAs (MBEAs). Extended by the minimal moves mutation they allow for a generalization of EA with self-adaptive mutation strength in discrete search spaces. In this article, a problem-specific EA for process engineering task is designed, following the MBEA guidelines and minimal moves mutation. On the background of the application, the usefulness of the design framework is discussed, and further extensions and corrections proposed. As a case-study, a two-stage stochastic programming problem in chemical batch process scheduling is considered. The algorithm design problem can be viewed as the choice of a hierarchical decision structure, where on different layers of the decision process symmetries and similarities can be exploited for the design of minimal moves. After a discussion of the design approach and its instantiation for the case-study, the resulting problem-specific EA/MIP is compared to a straightforward application of a canonical EA/MIP and to a monolithic mathematical programming algorithm. In view of the

Programming PHREEQC calculations with C++ and Python a comparative study

Science.gov (United States)

Charlton, Scott R.; Parkhurst, David L.; Muller, Mike

2011-01-01

The new IPhreeqc module provides an application programming interface (API) to facilitate coupling of other codes with the U.S. Geological Survey geochemical model PHREEQC. Traditionally, loose coupling of PHREEQC with other applications required methods to create PHREEQC input files, start external PHREEQC processes, and process PHREEQC output files. IPhreeqc eliminates most of this effort by providing direct access to PHREEQC capabilities through a component object model (COM), a library, or a dynamically linked library (DLL). Input and calculations can be specified through internally programmed strings, and all data exchange between an application and the module can occur in computer memory. This study compares simulations programmed in C++ and Python that are tightly coupled with IPhreeqc modules to the traditional simulations that are loosely coupled to PHREEQC. The study compares performance, quantifies effort, and evaluates lines of code and the complexity of the design. The comparisons show that IPhreeqc offers a more powerful and simpler approach for incorporating PHREEQC calculations into transport models and other applications that need to perform PHREEQC calculations. The IPhreeqc module facilitates the design of coupled applications and significantly reduces run times. Even a moderate knowledge of one of the supported programming languages allows more efficient use of PHREEQC than the traditional loosely coupled approach.

Early College for All: Efforts to Scale up Early Colleges in Multiple Settings

Science.gov (United States)

Edmunds, Julie A.

2016-01-01

Given the positive impacts of the small, stand-alone early college model and the desire to provide those benefits to more students, organizations have begun efforts to scale up the early college model in a variety of settings. These efforts have been supported by the federal government, particularly by the Investing in Innovation (i3) program.…

Design reliability assurance program for Korean next generation reactor

International Nuclear Information System (INIS)

Lee, Beom-Su; Han, Jin-Kyu; Na, Jang Hwan; Yoo, Kyung Yeong

1997-01-01

The Korean Next Generation Reactor (KNGR) project is to develop standardized nuclear power plant design for the construction of future nuclear power plants in Korea. The main purpose of the KNGR project is to develop the advanced nuclear power plants, which enhance safety and economics significantly through the incorporation of design concepts for severe accident prevention and mitigation, supplementary passive safety concept, simplification and application of modularization and so on. For those, Probabilistic Safety Assessment (PSA) and availability study will be performed at the early stage of the design, and the Design Reliability Assurance Program (D-RAP) is applied in the development of the KNGR to ensure that the safety and availability evaluated in the PSA and availability study at the early phase of the design is maintained through the detailed design, construction, procurement and operation of the plants. This paper presents the D-RAP concept that could be applied at the stage of the basic design of the nuclear power plants, based on the models for the reference plants and/or similar plants. 4 refs., 1 fig

A survey of program slicing for software engineering

Science.gov (United States)

Beck, Jon

1993-01-01

This research concerns program slicing which is used as a tool for program maintainence of software systems. Program slicing decreases the level of effort required to understand and maintain complex software systems. It was first designed as a debugging aid, but it has since been generalized into various tools and extended to include program comprehension, module cohesion estimation, requirements verification, dead code elimination, and maintainence of several software systems, including reverse engineering, parallelization, portability, and reuse component generation. This paper seeks to address and define terminology, theoretical concepts, program representation, different program graphs, developments in static slicing, dynamic slicing, and semantics and mathematical models. Applications for conventional slicing are presented, along with a prognosis of future work in this field.

[Design for constructability studies in support of the DOE ALWR (Advanced Light Water Reactor) Program

International Nuclear Information System (INIS)